Represents a cae region object
For more information, refer to the Solver language documentation
in the
CaeRegionBuilder - Interface in
nxopen.cae
CaeRegionCollection - Interface in nxopen.cae
Provides methods for managing
CAE.CaeRegion in a sim part
To obtain an instance of this class, refer to
SimSimulation
Created in NX7.0.0
Returns the CAE region collection belonging to this sim part .
caeReuseLibrary() - Method in interface nxopen.cae.BaseFEModel
Returns the CaeReuseLibrary belonging to the part .
CaeReuseLibrary - Interface in nxopen.tooling
CaeSession - Interface in nxopen.cae
This class provides access to all session related CAE functionality
To obtain an instance of this class, refer to
Session
Created in NX7.5.0
Returns the
CaeSession belonging to this session
Created in NX7.5.0
Represents a group of CAE object sets.
CaeSetGroupFilterType - Class in nxopen.cae
Used to specify the filter to extract type of objects from a group e.g geometric face, element, node ..etc
CaeSetObjectSubType - Class in nxopen.cae
Used to specify the sub type of selected objects e.g face of an element, edge of an element ..etc
caeSubId - Variable in class nxopen.annotations.SelectDimension.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubId - Variable in class nxopen.assemblies.SelectComponent.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubId - Variable in class nxopen.cae.SelectCAEBody.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubId - Variable in class nxopen.cae.SelectCAEEdge.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubId - Variable in class nxopen.cae.SelectCAEFace.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubId - Variable in class nxopen.drawings.SelectDraftingView.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubId - Variable in class nxopen.drawings.SelectDrawingRegion.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubId - Variable in class nxopen.drawings.SelectDrawingView.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubId - Variable in class nxopen.drawings.SelectSectionLine.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubId - Variable in class nxopen.facet.SelectFacetedBody.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubId - Variable in class nxopen.features.SelectFlatPattern.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubId - Variable in class nxopen.features.SelectPartModule.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubId - Variable in class nxopen.layout2d.SelectComponent.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubId - Variable in class nxopen.mechatronics.SelectAdapterSignal.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubId - Variable in class nxopen.mechatronics.SelectCollisionSensor.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubId - Variable in class nxopen.mechatronics.SelectPhysicsConstraint.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubId - Variable in class nxopen.mechatronics.SelectPhysicsJoint.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubId - Variable in class nxopen.mechatronics.SelectRigidBody.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubId - Variable in class nxopen.mechatronics.SelectSystemObject.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubId - Variable in class nxopen.mechatronics.SelectTagFormObject.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubId - Variable in class nxopen.motion.SelectJoint.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubId - Variable in class nxopen.motion.SelectLink.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubId - Variable in class nxopen.motion.SelectMarker.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubId - Variable in class nxopen.routing.SelectControlPoint.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubId - Variable in class nxopen.routing.SelectISegment.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubId - Variable in class nxopen.routing.SelectLineSegment.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubId - Variable in class nxopen.routing.SelectRun.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubId - Variable in class nxopen.routing.SelectStock.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubId - Variable in class nxopen.SelectBody.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubId - Variable in class nxopen.SelectCartesianCoordinateSystem.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubId - Variable in class nxopen.SelectCoordinateSystem.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubId - Variable in class nxopen.SelectCurve.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubId - Variable in class nxopen.SelectDatumPlane.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubId - Variable in class nxopen.SelectDisplayableObject.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubId - Variable in class nxopen.SelectEdge.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubId - Variable in class nxopen.SelectFace.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubId - Variable in class nxopen.SelectIBaseCurve.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubId - Variable in class nxopen.SelectICurve.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubId - Variable in class nxopen.SelectIParameterizedSurface.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubId - Variable in class nxopen.SelectISurface.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubId - Variable in class nxopen.SelectLine.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubId - Variable in class nxopen.SelectNXObject.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubId - Variable in class nxopen.SelectObject.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubId - Variable in class nxopen.SelectPart.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubId - Variable in class nxopen.SelectPoint.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubId - Variable in class nxopen.SelectSketch.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubId - Variable in class nxopen.SelectSmartObject.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubId - Variable in class nxopen.SelectSpline.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubId - Variable in class nxopen.SelectTaggedObject.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubId - Variable in class nxopen.SelectView.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubId - Variable in class nxopen.weld.SelectDatumPin.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubId - Variable in class nxopen.weld.SelectDatumSurface.ValueWithCaeSetObjectInfoData
CAE set object sub id
caeSubType - Variable in class nxopen.annotations.SelectDimension.ValueWithCaeSetObjectInfoData
CAE set object sub type
caeSubType - Variable in class nxopen.assemblies.SelectComponent.ValueWithCaeSetObjectInfoData
CAE set object sub type
caeSubType - Variable in class nxopen.cae.SelectCAEBody.ValueWithCaeSetObjectInfoData
CAE set object sub type
caeSubType - Variable in class nxopen.cae.SelectCAEEdge.ValueWithCaeSetObjectInfoData
CAE set object sub type
caeSubType - Variable in class nxopen.cae.SelectCAEFace.ValueWithCaeSetObjectInfoData
CAE set object sub type
caeSubType - Variable in class nxopen.drawings.SelectDraftingView.ValueWithCaeSetObjectInfoData
CAE set object sub type
caeSubType - Variable in class nxopen.drawings.SelectDrawingRegion.ValueWithCaeSetObjectInfoData
CAE set object sub type
caeSubType - Variable in class nxopen.drawings.SelectDrawingView.ValueWithCaeSetObjectInfoData
CAE set object sub type
caeSubType - Variable in class nxopen.drawings.SelectSectionLine.ValueWithCaeSetObjectInfoData
CAE set object sub type
caeSubType - Variable in class nxopen.facet.SelectFacetedBody.ValueWithCaeSetObjectInfoData
CAE set object sub type
caeSubType - Variable in class nxopen.features.SelectFlatPattern.ValueWithCaeSetObjectInfoData
CAE set object sub type
caeSubType - Variable in class nxopen.features.SelectPartModule.ValueWithCaeSetObjectInfoData
CAE set object sub type
caeSubType - Variable in class nxopen.layout2d.SelectComponent.ValueWithCaeSetObjectInfoData
CAE set object sub type
caeSubType - Variable in class nxopen.mechatronics.SelectAdapterSignal.ValueWithCaeSetObjectInfoData
CAE set object sub type
caeSubType - Variable in class nxopen.mechatronics.SelectCollisionSensor.ValueWithCaeSetObjectInfoData
CAE set object sub type
caeSubType - Variable in class nxopen.mechatronics.SelectPhysicsConstraint.ValueWithCaeSetObjectInfoData
CAE set object sub type
caeSubType - Variable in class nxopen.mechatronics.SelectPhysicsJoint.ValueWithCaeSetObjectInfoData
CAE set object sub type
caeSubType - Variable in class nxopen.mechatronics.SelectRigidBody.ValueWithCaeSetObjectInfoData
CAE set object sub type
caeSubType - Variable in class nxopen.mechatronics.SelectSystemObject.ValueWithCaeSetObjectInfoData
CAE set object sub type
caeSubType - Variable in class nxopen.mechatronics.SelectTagFormObject.ValueWithCaeSetObjectInfoData
CAE set object sub type
caeSubType - Variable in class nxopen.motion.SelectJoint.ValueWithCaeSetObjectInfoData
CAE set object sub type
caeSubType - Variable in class nxopen.motion.SelectLink.ValueWithCaeSetObjectInfoData
CAE set object sub type
caeSubType - Variable in class nxopen.motion.SelectMarker.ValueWithCaeSetObjectInfoData
CAE set object sub type
caeSubType - Variable in class nxopen.routing.SelectControlPoint.ValueWithCaeSetObjectInfoData
CAE set object sub type
caeSubType - Variable in class nxopen.routing.SelectISegment.ValueWithCaeSetObjectInfoData
CAE set object sub type
caeSubType - Variable in class nxopen.routing.SelectLineSegment.ValueWithCaeSetObjectInfoData
CAE set object sub type
caeSubType - Variable in class nxopen.routing.SelectRun.ValueWithCaeSetObjectInfoData
CAE set object sub type
caeSubType - Variable in class nxopen.routing.SelectStock.ValueWithCaeSetObjectInfoData
CAE set object sub type
caeSubType - Variable in class nxopen.SelectBody.ValueWithCaeSetObjectInfoData
CAE set object sub type
caeSubType - Variable in class nxopen.SelectCartesianCoordinateSystem.ValueWithCaeSetObjectInfoData
CAE set object sub type
caeSubType - Variable in class nxopen.SelectCoordinateSystem.ValueWithCaeSetObjectInfoData
CAE set object sub type
caeSubType - Variable in class nxopen.SelectCurve.ValueWithCaeSetObjectInfoData
CAE set object sub type
caeSubType - Variable in class nxopen.SelectDatumPlane.ValueWithCaeSetObjectInfoData
CAE set object sub type
caeSubType - Variable in class nxopen.SelectDisplayableObject.ValueWithCaeSetObjectInfoData
CAE set object sub type
caeSubType - Variable in class nxopen.SelectEdge.ValueWithCaeSetObjectInfoData
CAE set object sub type
caeSubType - Variable in class nxopen.SelectFace.ValueWithCaeSetObjectInfoData
CAE set object sub type
caeSubType - Variable in class nxopen.SelectIBaseCurve.ValueWithCaeSetObjectInfoData
CAE set object sub type
caeSubType - Variable in class nxopen.SelectICurve.ValueWithCaeSetObjectInfoData
CAE set object sub type
caeSubType - Variable in class nxopen.SelectIParameterizedSurface.ValueWithCaeSetObjectInfoData
CAE set object sub type
caeSubType - Variable in class nxopen.SelectISurface.ValueWithCaeSetObjectInfoData
CAE set object sub type
caeSubType - Variable in class nxopen.SelectLine.ValueWithCaeSetObjectInfoData
CAE set object sub type
caeSubType - Variable in class nxopen.SelectNXObject.ValueWithCaeSetObjectInfoData
CAE set object sub type
caeSubType - Variable in class nxopen.SelectObject.ValueWithCaeSetObjectInfoData
CAE set object sub type
caeSubType - Variable in class nxopen.SelectPart.ValueWithCaeSetObjectInfoData
CAE set object sub type
caeSubType - Variable in class nxopen.SelectPoint.ValueWithCaeSetObjectInfoData
CAE set object sub type
caeSubType - Variable in class nxopen.SelectSketch.ValueWithCaeSetObjectInfoData
CAE set object sub type
caeSubType - Variable in class nxopen.SelectSmartObject.ValueWithCaeSetObjectInfoData
CAE set object sub type
caeSubType - Variable in class nxopen.SelectSpline.ValueWithCaeSetObjectInfoData
CAE set object sub type
caeSubType - Variable in class nxopen.SelectTaggedObject.ValueWithCaeSetObjectInfoData
CAE set object sub type
caeSubType - Variable in class nxopen.SelectView.ValueWithCaeSetObjectInfoData
CAE set object sub type
caeSubType - Variable in class nxopen.weld.SelectDatumPin.ValueWithCaeSetObjectInfoData
CAE set object sub type
caeSubType - Variable in class nxopen.weld.SelectDatumSurface.ValueWithCaeSetObjectInfoData
CAE set object sub type
CAET_ELEMENT_CHECK_TOL - Static variable in class nxopen.uf.UFConstants
CAET_MAX_ELEM_NODES - Static variable in class nxopen.uf.UFConstants
CAEVertex - Interface in nxopen.cae
Represents a CAE vertex geometry
.
CAGE_AND_BODY - Static variable in class nxopen.preferences.SubdivisionModelingPreferences.DisplayModes
Display both cage and body
CAGE_ONLY - Static variable in class nxopen.preferences.SubdivisionModelingPreferences.DisplayModes
Display cage only
cageCode() - Method in interface nxopen.annotations.EnterpriseIdentificationBuilder
Returns the cage code
License requirements: None.
cageManipulator() - Method in interface nxopen.features.subdivision.TransformCageData
Returns the cage manipulation data.
CageManipulatorData - Interface in nxopen.features.subdivision
Subdivision cage manipulation tool.
CageManipulatorData.ObjectMoveData - Class in nxopen.features.subdivision
Contains object movement information.
CageManipulatorData.ObjectSelectionData - Class in nxopen.features.subdivision
Contains object selection information.
CagePolylineBuilder - Interface in nxopen.features.subdivision
Cage polyline builder class.
CageSectionData - Interface in nxopen.features.subdivision
Represents subdivision cage section selection.
CageSectionDataList - Interface in nxopen.features.subdivision
Represents a list of objects.
calcAbsMinmaxBox(Tag) - Method in interface nxopen.uf.UFRoute
calcThroughLimits(nxopen.Direction) - Method in interface nxopen.features.MasterCutBuilder
Calculate start and end through limit values
License requirements: solid_modeling ("SOLIDS MODELING")
.
CalcThroughLimitsData() - Constructor for class nxopen.features.MasterCutBuilder.CalcThroughLimitsData
CALCULATE - Static variable in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.MaximumAlternatingStressEnum
Calculate
calculate() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
Calculate button on the Calculate Tab page.
calculate() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
Method for the "Calculate" button, needs to be called before calling commit.
CalculateAreaBuilder - Interface in nxopen.tooling
CalculateAreaCollection - Interface in nxopen.tooling
Represents a collection of CalculateArea builder
To obtain an instance of this class, refer to
ToolingManager
Created in NX6.0.0
Returns the CalculateAreaCollection instance belonging to this part .
calculateBeamStrResults - Variable in class nxopen.cae.Result.ResultParameters
Deprecated.
calculateBoxSize() - Method in interface nxopen.features.ToolingBoxBuilder
Calculate box size and set directions, edge length, lower point position.
calculateComacs() - Method in interface nxopen.cae.CorrelSolution
Computes the CoMAC correlation metric for active modes
License requirements: nx_correl_base ("FE Correlation")
.
CalculateComacsData() - Constructor for class nxopen.cae.CorrelSolution.CalculateComacsData
calculateConvex() - Method in interface nxopen.mechatronics.CollisionBodyBuilder
The convex of the collide.
calculateCutLength() - Method in interface nxopen.routing.electrical.ElectricalStockDevice
Calculates and sets cut length on object.
calculateDatumMeasurementDefaultDirection() - Method in interface nxopen.weld.WeldPointBuilder
Calculate location and default direction of datum and measurement, need to set the current point prior to calling this method
License requirements: ugweld ("UG WELD")
.
calculateDistance(int) - Method in interface nxopen.cam.MillingTrackpointBuilder
Calculate distance when defining tracking point only by the diameter
License requirements: cam_base ("CAM BASE")
.
CalculateDistanceData() - Constructor for class nxopen.cam.MillingTrackpointBuilder.CalculateDistanceData
calculateErrors() - Method in interface nxopen.cae.ModelUpdateSolution
Calculates errors
License requirements: nx_correl_update ("FE Model Update")
.
calculateGrueblerCount(NXObject) - Method in interface nxopen.motion.MotionSimulation
Calculate the gruebler count of given motion part
License requirements: None.
calculateGrueblerCount() - Method in interface nxopen.motion.MotionSolution
Calculate gruebler count of motion solution
License requirements: mechanisms ("MECHANISMS")
.
calculateMaxDeviation() - Method in interface nxopen.die.SpringbackCompensationBuilder
Returns the indication if the feature should calculate the maximum deviation of the result.
calculateMesh() - Method in interface nxopen.mechatronics.CollisionBodyBuilder
The mesh of the collide.
calculateMeshValue() - Method in interface nxopen.tooling.LsdynaKfileGeneratorBuilder
Calculates the default mesh settings values.
calculateMultiConvex() - Method in interface nxopen.mechatronics.CollisionBodyBuilder
The multi-convex of the collide.
calculateMultiMathRecords(AfuMathOperation.MultiType, String, int, String, int, AfuMathOperation.OutputType, String) - Method in interface nxopen.cae.AfuMathOperation
Does Multi Math Operations on AFU Data Records
License requirements: nx_ftk ("NX Advanced Graphing")
.
calculateOverallMathRecords(AfuMathOperation.Overall, String[], int[], AfuMathOperation.OutputType, String) - Method in interface nxopen.cae.AfuMathOperation
Does Overall Math Operations on AFU Data Records
License requirements: nx_ftk ("NX Advanced Graphing")
.
calculatePenetrationDepth(DisplayableObject[], DisplayableObject[]) - Method in interface nxopen.assemblies.ClearanceSet
Calculate penetration depth for a set of hard interferences.
calculatePointCurvature(Face, Point3d) - Method in interface nxopen.features.ConcaveFacesBuilder
The radius values at the point selected on a targeted face, the maximum and minimum radius of the targeted face.
CalculatePointCurvatureData() - Constructor for class nxopen.features.ConcaveFacesBuilder.CalculatePointCurvatureData
calculateProfilePoints() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
Calculate the points of the tire profile.
calculateRefDir(Tag, Tag, boolean, Tag) - Method in interface nxopen.uf.UFModeling
calculateSingleMathAbsoluteValue(String, int, AfuMathOperation.OutputType, String) - Method in interface nxopen.cae.AfuMathOperation
Gets absolute values of AFU Data Records
License requirements: nx_ftk ("NX Advanced Graphing")
.
calculateSingleMathComplexConjugate(String, int, AfuMathOperation.OutputType, String) - Method in interface nxopen.cae.AfuMathOperation
Gets complex conjugate values of AFU Data Records
License requirements: nx_ftk ("NX Advanced Graphing")
.
calculateSingleMathFourierTransform(String, int, AfuMathOperation.OutputType, String) - Method in interface nxopen.cae.AfuMathOperation
Gets fourier transform values of AFU Data Records
License requirements: nx_ftk ("NX Advanced Graphing")
.
calculateSingleMathFrequencyDifferentiation(String, int, AfuMathOperation.OutputType, String) - Method in interface nxopen.cae.AfuMathOperation
Gets frequency differentiation values of AFU Data Records
License requirements: nx_ftk ("NX Advanced Graphing")
.
calculateSingleMathFrequencyIntegration(boolean, String, int, AfuMathOperation.OutputType, String) - Method in interface nxopen.cae.AfuMathOperation
Gets frequency integration values of AFU Data Records
License requirements: nx_ftk ("NX Advanced Graphing")
.
calculateSingleMathIndependentDifferentiation(String, int, AfuMathOperation.OutputType, String) - Method in interface nxopen.cae.AfuMathOperation
Gets independent differentiation values of AFU Data Records
License requirements: nx_ftk ("NX Advanced Graphing")
.
calculateSingleMathIndependentIntegration(boolean, String, int, AfuMathOperation.OutputType, String) - Method in interface nxopen.cae.AfuMathOperation
Gets independent integration values of AFU Data Records
License requirements: nx_ftk ("NX Advanced Graphing")
.
calculateSingleMathInverse(String, int, AfuMathOperation.OutputType, String) - Method in interface nxopen.cae.AfuMathOperation
Gets inverse values of AFU Data Records
License requirements: nx_ftk ("NX Advanced Graphing")
.
calculateSingleMathLagrangianInterpolation(int, AfuMathOperation.OuterInterpolation, double, double, double, String, int, AfuMathOperation.OutputType, String) - Method in interface nxopen.cae.AfuMathOperation
Interpolates AFU Data Records with lagrangian method
License requirements: nx_ftk ("NX Advanced Graphing")
.
calculateSingleMathLinearInterpolation(AfuMathOperation.OuterInterpolation, double, double, double, String, int, AfuMathOperation.OutputType, String) - Method in interface nxopen.cae.AfuMathOperation
Interpolates AFU Data Records with linear method
License requirements: nx_ftk ("NX Advanced Graphing")
.
calculateSingleMathMovingAverage(int, String, int, AfuMathOperation.OutputType, String) - Method in interface nxopen.cae.AfuMathOperation
Gets moving average values of AFU Data Records
License requirements: nx_ftk ("NX Advanced Graphing")
.
calculateSingleMathOffsetByComplex(double, double, String, int, AfuMathOperation.OutputType, String) - Method in interface nxopen.cae.AfuMathOperation
Offsets AFU Data Records by complex value
License requirements: nx_ftk ("NX Advanced Graphing")
.
calculateSingleMathOffsetByReal(double, String, int, AfuMathOperation.OutputType, String) - Method in interface nxopen.cae.AfuMathOperation
Offsets AFU Data Records by real value
License requirements: nx_ftk ("NX Advanced Graphing")
.
calculateSingleMathScaleByComplex(double, double, String, int, AfuMathOperation.OutputType, String) - Method in interface nxopen.cae.AfuMathOperation
Scales AFU Data Records by complex value
License requirements: nx_ftk ("NX Advanced Graphing")
.
calculateSingleMathScaleByReal(double, String, int, AfuMathOperation.OutputType, String) - Method in interface nxopen.cae.AfuMathOperation
Scales AFU Data Records by real value
License requirements: nx_ftk ("NX Advanced Graphing")
.
calculateSingleMathShiftAbscissa(double, String, int, AfuMathOperation.OutputType, String) - Method in interface nxopen.cae.AfuMathOperation
Shifts abscissa values of AFU Data Records
License requirements: nx_ftk ("NX Advanced Graphing")
.
calculateSingleMathSignValue(String, int, AfuMathOperation.OutputType, String) - Method in interface nxopen.cae.AfuMathOperation
Gets sign values of AFU Data Records
License requirements: nx_ftk ("NX Advanced Graphing")
.
calculateSingleMathSquareMagnitude(String, int, AfuMathOperation.OutputType, String) - Method in interface nxopen.cae.AfuMathOperation
Gets square of magnitude values of AFU Data Records
License requirements: nx_ftk ("NX Advanced Graphing")
.
calculateSingleMathSquareRoot(String, int, AfuMathOperation.OutputType, String) - Method in interface nxopen.cae.AfuMathOperation
Gets square root values of AFU Data Records
License requirements: nx_ftk ("NX Advanced Graphing")
.
calculateStaticEquilibrium() - Method in interface nxopen.uf.UFMotion
calculateWeldPoints() - Method in interface nxopen.weld.WeldPointBuilder
To calculate all weld points
License requirements: ugweld ("UG WELD")
.
calculation() - Method in interface nxopen.bodydes.OnestepUnformBuilder
Starts solver to calculate.
calculation() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
Starts solver to calculate.
calculation() - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder
Returns the calculation type for this head impact study.
calculationBody() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
Returns the body for thickness analysis.
calculationCalculateMethod() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
Returns the calculation method used in the thickness analysis.
calculationDrawDirection() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
Returns the draw direction on the Calculate Tab page.
calculationMaximumSpacing() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
Returns the maximum spacing used in the thickness analysis.
calculationMaximumThicknessTolerance() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
Returns the maximum thickness tolerance used in the thickness analysis.
calculationMethod() - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder
Returns the setting for the clearance calculation method.
calculationMethod() - Method in interface nxopen.features.shipdesign.PlatePreparationBuilder
Returns the calculation method defining methods to calculate shrinkage factors.
calculationMethod() - Method in interface nxopen.features.vehicledesign.InnerAngleBuilder
Returns the calculation method type which determines the calculation method in the inner angle.
calculationMethod() - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder
Returns the calculation method
License requirements: None.
calculationMethod() - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder
Returns the calculation method
License requirements: None.
calculationMethod() - Method in interface nxopen.geometricanalysis.SurfaceIntersectionBuilder
Returns the calculation method
License requirements: None.
calculationOption() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
Returns the calculation option on the Calculate Tab page.
calculationProductBody() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
Returns the product body to be analyzed on the Calculate Tab page.
calculationProjectToFace() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
Returns the project to face option for the thickness analysis on the Calculation Tab page.
calculationSamplePointsIntervalScale() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
Returns the scale for controlling the sampling spacing and thickness analysis tolerance.
calculationType() - Method in interface nxopen.tooling.ForceCalculationBuilder
Returns the calculation method.
calibrationDepth() - Method in interface nxopen.cam.ProbeCalibrateStylusMoveBuilder
Returns the calibration depth
License requirements: None.
calibrationType() - Method in interface nxopen.cam.ProbeCalibrateStylusMoveBuilder
Returns the calibration type
License requirements: None.
CALLOUT - Static variable in class nxopen.annotations.HoleCalloutSettingsBuilder.Parametertype
CALLOUT - Static variable in class nxopen.annotations.PartsListBuilder.PartsListMainSymbolText
CALLOUT - Static variable in class nxopen.annotations.PartsListBuilder.PartsListReferenceSymbolText
callout() - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
Returns the callout block
License requirements: None.
callout - Variable in class nxopen.uf.UFModl.SymbThreadData
CALLOUTAND_QUANTITY - Static variable in class nxopen.annotations.PartsListBuilder.PartsListMainSymbolText
CALLOUTAND_QUANTITY - Static variable in class nxopen.annotations.PartsListBuilder.PartsListReferenceSymbolText
calloutIncrement - Variable in class nxopen.uf.UFPlist.Prefs
CalloutString() - Constructor for class nxopen.uf.UFGdt.CalloutString
CalloutString(Tag, UFGdt.ToleranceType, String) - Constructor for class nxopen.uf.UFGdt.CalloutString
calloutStrings - Variable in class nxopen.uf.UFGdt.AskCalloutStringsData
calloutSuffix() - Method in interface nxopen.annotations.PartsListBuilder
Returns the callout suffix specifies the suffix to be used for reference symbol text
License requirements: None.
calloutType() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
Returns the callout type
License requirements: None.
CAM - Static variable in class nxopen.die.MachineReliefBuilder.Types
Add casting material for the trim, or flange, steel mating surface.
CAM - Static variable in class nxopen.FileNewApplication
Deprecated.
Specifies a Manufacturing file new template
Cam - Interface in nxopen.mechatronics
Represents the Cam Constraint.
CAM - Static variable in class nxopen.tooling.QuickQuotationBuilder.ObjectTypes
sheet body is camunits.
cam() - Method in interface nxopen.UFSession
CAM_ACL_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
CAM_ACL_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
CAM_BCL_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
CAM_BCL_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
CAM_CL_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
CAM_CL_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
CAM_CLF_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
CAM_CLF_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
CAM_CLS_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
CAM_CLS_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
CAM_CONFIG_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
CAM_CONFIG_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
CAM_DISPAT_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
CAM_DISPAT_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
CAM_FEA_EXPORT_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
CAM_GPM_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
CAM_GPM_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
CAM_ISO_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
CAM_ISO_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
CAM_LIBLIST_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
CAM_LIBLIST_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
CAM_LISTOUT_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
CAM_LISTOUT_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
CAM_MDF_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
CAM_MDF_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
CAM_NCOUT_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
CAM_NCOUT_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
CAM_SDIR - Static variable in class nxopen.uf.UFUi.DialogDirId
CAM_SETUP_PRT_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
CAM_SETUP_PRT_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
CAM_SFLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
CAM_SHOP_DOC_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
CAM_SHOP_DOC_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
CAM_TEMPSET_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
CAM_TEMPSET_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
CAM_TOOLIB_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
CAM_TOOLIB_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
CAM_VCUTS_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
CAM_VCUTS_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
CAM_VCUTT_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
CAM_VCUTT_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
CAMAttribute - Interface in nxopen.cam
Represents a CAM Feature Attribute
To obtain an instance of this class use nxopen.cam.CAMFeature
Created in NX8.0.0
CAMAttribute.ValueType - Class in nxopen.cam
Attribute types
CAMAttributeCollection - Interface in nxopen.cam
Represents the CAM Attribute collection
To obtain an instance of this class, refer to nxopen.cam.CAMFeature
Created in NX8.0.0
camber() - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder
Returns the camber of wheel in degree.
camber() - Method in interface nxopen.features.vehicledesign.BaseDataWheelBuilder
Returns the wheel camber in degree.
camberHeight() - Method in interface nxopen.features.shipdesign.DeckBuilder
Returns the expression containing the difference in the height of the camber from the center
of the ship to the hull intersections in the selected plane.
camberOffset() - Method in interface nxopen.features.shipdesign.DeckBuilder
Returns the expression containing the offset from the ends of the camber section in the
selected plane to the start of the straight portion of the camber shape.
cambnd() - Method in interface nxopen.UFSession
cambndWedm() - Method in interface nxopen.UFSession
CamBuilder - Interface in nxopen.mechatronics
Represents a
Cam builder.
Represents the axis joint type.
CamCollection - Interface in nxopen.mechatronics
Represents a collection of Cam.
camdataManager() - Method in interface nxopen.Part
Returns the Tooling.CAMDataManager for this part
Created in NX9.0.0
CAMDataManager - Interface in nxopen.tooling
Represents an object that manages cam data objects.
CAMDataPrepManager - Interface in nxopen.geometricutilities
Contains the create functions for builders.
camdataPrepManager() - Method in interface nxopen.Part
Returns the CAMDataPrepManager instance belonging to this part .
camDefinitionMethod() - Method in interface nxopen.tooling.MotionSimulationBuilder
camDirection() - Method in interface nxopen.die.FlangeTaskBuilder
Returns the cam direction of the flange task
License requirements: die_engineering ("DIE ENGINEERING")
.
camDirection() - Method in interface nxopen.die.FormTaskBuilder
Returns the cam direction of the form task.
camDirection() - Method in interface nxopen.die.MachineReliefBuilder
Returns the direction of the cam for trimming.
camDirection() - Method in interface nxopen.die.PierceTaskBuilder
Returns the cam direction of the pierce task
License requirements: die_engineering ("DIE ENGINEERING")
.
camDirection() - Method in interface nxopen.die.SteelInsertBuilder
Returns the cam direction of the steelinsert
License requirements: ug_die_design ("Die Design")
.
camDirection() - Method in interface nxopen.die.TrimTaskBuilder
Returns the cam direction of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.
camDirection() - Method in interface nxopen.tooling.DieDesignTrimPostBuilder
Returns the cam direction used to create Trim Post
License requirements: ug_die_design ("Die Design")
.
camDirection() - Method in interface nxopen.tooling.DieEngFormTaskBuilder
Returns the cam direction.
Camera - Interface in nxopen.display
Represents a camera
To obtain an instance of this class, use
CameraCollection
Created in NX5.0.0
Deprecated.
scale 1, 0 offset uv texture space
cameraAxis() - Method in interface nxopen.features.vehicledesign.CloseRangeCameraListItemBuilder
Returns the selected axis defining the camera direction.
CameraBuilder - Interface in nxopen.display
CameraBuilder.Aperture - Class in nxopen.display
Predefined apertures: f2.8, f5.6, f8, f11, f16, f22
CameraBuilder.FovMeasured - Class in nxopen.display
either horizontal or vertical measure
CameraBuilder.LensAngle - Class in nxopen.display
the way to define the field of view angle
CameraBuilder.LensFlare - Class in nxopen.display
Predefined lens flare types: Standard, 35mm, 50mm, 105mm,
polygonal, 35mm poly, 50mm poly, 105mm poly, spark, star
CameraBuilder.StockLens - Class in nxopen.display
Predefined lenses: 28, 35, 50, 70, 105, 135, 210, 300mm
CameraBuilder.Types - Class in nxopen.display
the camera types
CameraCollection - Interface in nxopen.display
Represents a collection cameras
To obtain an instance of this class, refer to
BasePart
Created in NX5.0.0
Returns the coordinate system specifying the camera position.
cameraDirectionPlaneOption - Variable in class nxopen.uf.UFDisp.TextureSpaceInfo
cameraDistance() - Method in interface nxopen.display.PerspectiveOptionsBuilder
Returns the camera distance: The distance from the camera's position to the
target position in the work view view when it is a perspective view.
cameraFace() - Method in interface nxopen.features.vehicledesign.CloseRangeCameraListItemBuilder
Returns the face selections used to identify the camera surface.
CameraLayerAndXmlpData() - Constructor for class nxopen.die.FlangeTaskBuilder.CameraLayerAndXmlpData
CameraLayerAndXmlpData() - Constructor for class nxopen.die.PierceTaskBuilder.CameraLayerAndXmlpData
CameraLayerAndXmlpData() - Constructor for class nxopen.die.TrimTaskBuilder.CameraLayerAndXmlpData
cameraList() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
cameraMatrix() - Method in interface nxopen.display.CameraBuilder
Returns the camera rotation matrix
License requirements: None.
cameraName() - Method in interface nxopen.display.CameraBuilder
Returns the camera name as a TEXT string.
cameraNameChar() - Method in interface nxopen.display.CameraBuilder
Returns the camera name as a char string
License requirements: None.
cameraPosition() - Method in interface nxopen.display.CameraBuilder
Returns the coordinates of the camera point
License requirements: None.
cameras() - Method in interface nxopen.BasePart
Returns the Display.CameraCollection instance belonging to this part
Created in NX3.0.0
cameraType() - Method in interface nxopen.features.vehicledesign.CloseRangeCameraListItemBuilder
Returns the camera definition type used by the close range visibility.
CAMFeatureCollection - Interface in nxopen.cam
Represents the CAMFeature collection
To obtain an instance of this class, refer to
BasePart
Created in NX7.5.0
Represents a list of objects.
camfeatures() - Method in interface nxopen.BasePart
Returns the CAMFeatureCollection instance belonging to this part .
CamGeneralPropertiesBuilder - Interface in nxopen.cam
camgeom() - Method in interface nxopen.UFSession
camgroupCollection() - Method in interface nxopen.cam.CAMSetup
Returns the NCGroupCollection instance belonging to this setup .
CamInspectionOperationCsysreferencetypes - Class in nxopen.cam
Coordinate system that the inspection feature data is relative to
CamInspectionOperationExtenttypes - Class in nxopen.cam
Specifies whether the feature extent is bounded or unbounded
CamInspectionOperationFeaturetypes - Class in nxopen.cam
Specifies the type of an inspection feature
CamInspectionOperationInneroutertypes - Class in nxopen.cam
Directionality of feature surface
camMode - Variable in class nxopen.uf.UFPart.ImportPartModes
cammoveCollection() - Method in interface nxopen.cam.Operation
Represents Move Collection .
camName() - Method in interface nxopen.tooling.DefineCamBuilder
Returns the cam name
License requirements: None.
CAMObject - Interface in nxopen.cam
Represents interface for all CAM Object
To create or edit an instance of this class, use
ParamBuilder
Created in NX4.0.0
Represents the CAM attribute type.
CAMObject.ErrorItem - Class in nxopen.cam
Error Item
CAMObject.FeedRateData - Class in nxopen.cam
CAMObject.FeedRateUnit - Class in nxopen.cam
The unit of feed rate
CAMObject.Status - Class in nxopen.cam
The status of the object
CAMObject.WireEdmFeedRateData - Class in nxopen.cam
camoperationCollection() - Method in interface nxopen.cam.CAMSetup
Returns the OperationCollection instance belonging to this setup .
CAMPBELL_DIAGRAM - Static variable in class nxopen.cae.XyFunctionDataType
Function is Campbell Diagram
CAMPBELL_DIAGRAM - Static variable in class nxopen.cae.XyFunctionGeneralType
Function is Campbell Diagram
camPref() - Method in interface nxopen.UFSession
camPrepro() - Method in interface nxopen.UFSession
camProfile() - Method in interface nxopen.mechatronics.CamBuilder
Returns the cam profile.
CamProfile - Interface in nxopen.mechatronics
Represents the CamProfile class.
camProfile() - Method in interface nxopen.mechatronics.GraphControlBuilder
Returns a cam profile that contains a number of curves that describes the dependency of
the motion of a Slave Axis with respect to the Master Axis.
CamProfileBuilder - Interface in nxopen.mechatronics
CamProfileBuilder.Element - Class in nxopen.mechatronics
Contains segment information of a motion segment
CamProfileBuilder.MasterValueUnit - Class in nxopen.mechatronics
The master value unit indicates which type master joint is.
CamProfileBuilder.ProfileCyclicType - Class in nxopen.mechatronics
Indicates which cyclic type should be take.The type of Cam Profile can be switched between non-cyclic,
cyclic and relative cyclic
CamProfileBuilder.SlaveValueUnit - Class in nxopen.mechatronics
The master value unit indicates which type master joint is.
CamProfileCollection - Interface in nxopen.mechatronics
Represents a collection of Cam Profile.
camProfiles() - Method in interface nxopen.mechatronics.PhysicsManager
camrelief() - Method in interface nxopen.tooling.DieDesignTrimPostBuilder
Returns the cam relief parameter of Trim Post section
License requirements: ug_die_design ("Die Design")
.
cams() - Method in interface nxopen.mechatronics.PhysicsManager
Returns the
CamCollection belonging to this part
Created in NX7.5.1
Represents cam session
To obtain an instance of this class, refer to
Session
Created in NX4.0.0
Returns the CAM session .
CAMSession.ObjectSubtype - Class in nxopen.cam
the template subtype class
CAMSetup - Interface in nxopen.cam
cam setup
To obtain an instance of this class, use
Part.camsetup()
Created in NX4.0.0
Returns the CAM setup of the work part
License requirements: cam_base ("CAM BASE")
.
CAMSetup.OutputUnits - Class in nxopen.cam
Output units used in output clsf and postprocess.
CAMSetup.PartMaterialData - Class in nxopen.cam
CAMSetup.Paste - Class in nxopen.cam
Paste position.
CAMSetup.PostprocessSettingsOutputWarning - Class in nxopen.cam
Output warning setting for Postprocess
CAMSetup.PostprocessSettingsReviewTool - Class in nxopen.cam
Review tool setting for Postprocess
CAMSetup.RetrieveToolData - Class in nxopen.cam
CAMSetup.Ude - Class in nxopen.cam
The UDE type
CAMSetup.View - Class in nxopen.cam
ONT view.
camStatus() - Method in interface nxopen.cam.Cycle
Returns the cam status
License requirements: None.
camtext() - Method in interface nxopen.UFSession
camtrackPointCollection() - Method in interface nxopen.cam.Tool
Returns the CAMTrackPointCollection .
camType() - Method in interface nxopen.die.FlangeTaskBuilder
Returns the cam type of the flange task
License requirements: die_engineering ("DIE ENGINEERING")
.
camType() - Method in interface nxopen.die.PierceTaskBuilder
Returns the cam type of the pierce task
License requirements: die_engineering ("DIE ENGINEERING")
.
camType() - Method in interface nxopen.die.TrimTaskBuilder
Returns the cam type of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.
camType() - Method in interface nxopen.tooling.DieEngTrimTaskBuilder
Returns the cam type.
camunitColor() - Method in interface nxopen.tooling.QuickQuotationBuilder
Returns the cam unit color.
camValue() - Method in interface nxopen.cam.Cycle
Returns the cam value
License requirements: None.
CAN_NOT_PERFORM_CHECK - Static variable in class nxopen.geometricanalysis.SimpleInterference.Result
An unknown
error has occured while performing
the interference check.
canAcceptItemUde(UFVariant, UFCambnd.UdeSetType, String) - Method in interface nxopen.uf.UFCambnd
canAcceptUde(Tag, UFUde.SetType, String) - Method in interface nxopen.uf.UFParam
canAcceptUdeSet(Tag, UFUde.SetType) - Method in interface nxopen.uf.UFParam
canAllowBackSideSelection() - Method in interface nxopen.preferences.SubdivisionModelingPreferences
Returns the flag indicating if the hidden topology selection is allowed or not.
canApplyToAll() - Method in interface nxopen.features.IFormBuilder
Returns the value indicating if continuity is to be applied to all sides of the surface
License requirements: None.
canBeDisplayPart() - Method in interface nxopen.BasePart
Returns true if the part can be displayed and false if not displayed
License requirements: None.
canBeEdited - Variable in class nxopen.userdefinedtemplate.InstantiationBuilder.MatchedExpressionData
canBlend() - Method in interface nxopen.features.EdgeSymmetryBuilder
Returns the value indicating if matching to be performed with the blend value
License requirements: None.
cancel() - Method in interface nxopen.blockstyler.BlockDialog.Cancel
Cancel callback
License requirements: None.
CANCEL - Static variable in class nxopen.menubar.MenuBarManager.CallbackStatus
User interaction requested inhibiting the
menu item's actions.
CANCEL - Static variable in class nxopen.Selection.DialogResponse
User selected Cancel
CANCEL - Static variable in class nxopen.Selection.Response
User selected Cancel
cancel(StylerEvent) - Method in interface nxopen.uistyler.DialogItem.Cancel
Called when a dialog user clicks Cancel or <Alt>MB2 anywhere in NX or presses Cancel's keyboard accelerator
as defined in the resource file.Cancel callbacks should terminate the dialog and always return UF_UI_CB_EXIT_DIALOG.
CANCEL - Static variable in class nxopen.uistyler.DialogItem.DialogItemIndex
Cancel index
CANCEL - Static variable in class nxopen.uistyler.DialogResponse
Cancel button was selected.
CANCEL_INDEX - Static variable in class nxopen.uistyler.StylerEvent.Miscellaneous
Cancel index
CANCEL_REASON - Static variable in class nxopen.uistyler.StylerEvent.Reason
Cancel reason
cancelUfDialog(int) - Method in interface nxopen.uf.UFUi
canChangeLeaderPositionParameter() - Method in interface nxopen.annotations.Gdt
Returns a flag indicating whether the Annotations.Gdt#leaderPositionParameter can be changed
License requirements: None.
canCopyAsSketch() - Method in interface nxopen.gateway.CopyCutBuilder
Returns a flag indicating whether to copy as sketch curves or not
License requirements: None.
canCreateBoundingBox() - Method in interface nxopen.features.TextBuilder
Returns the flag indicating if bounding box can be created
License requirements: None.
canCreateNewBody() - Method in interface nxopen.features.EdgeSymmetryBuilder
Returns whether the operation is applied to a copy of the face there by creating new body
License requirements: None.
canCreateNewBody() - Method in interface nxopen.features.IFormBuilder
Returns whether the operation is applied to a copy of the face there by creating new body
License requirements: None.
canCreateSingleFeature() - Method in interface nxopen.features.subdivision.ImportSubdivisionGeometryBuilder
Returns the flag indicating if single feature should be created for all the disjoint regions of the subdivision geometry.
canDeselectObjectsAutomatically() - Method in interface nxopen.features.subdivision.SelectCageObjectData
Returns the flag indicating if previously selected objects can be de-selected during selection of new objects.
candidatePoint() - Method in interface nxopen.drawings.ViewPlacementBuilder
Returns the point to align in the view being edited.
candidateStockCollector() - Method in interface nxopen.routing.MergeStocksBuilder
Returns a collector object that holds candidate stocks to be merged with target stock.
candidateTypeNames - Variable in class nxopen.uf.UFMfm.AskCandidateMachiningFeatureTypesData
candidateView() - Method in interface nxopen.drawings.ViewAlignmentBuilder
Returns the candidate view in builder
License requirements: drafting ("DRAFTING")
.
canDivide() - Method in interface nxopen.facet.SnipFacetBodyBuilder
Returns the value indicating if facet body is to be divided
License requirements: None.
canInferConstraintFromAttachmentParent() - Method in interface nxopen.features.GeometricConstraintData
Returns the flag indicating if a constraint can be inferred from the parent of the attachment object of the point.
canJoinCurves() - Method in interface nxopen.features.TextBuilder
Returns the flag indicating if curves can be joined
License requirements: None.
canKeepParameterization() - Method in interface nxopen.features.IFormBuilder
Returns the value indicating if input surface parameterization should be preserved during deformation
License requirements: None.
canKeepTemplateSelected() - Method in interface nxopen.features.FitCurveBuilder
Returns the flag indicating if template curve should be kept selected
License requirements: None.
canMoveAlongCurve() - Method in interface nxopen.geometricutilities.CurveShapingBuilder
Returns the value indicating if point should be moved along curve.
canMoveToolOnly() - Method in interface nxopen.features.subdivision.CopyCageBuilder
Returns the flag indicating if tool can be moved alone without moving selected topology
License requirements: None.
canMoveToolOnly() - Method in interface nxopen.features.subdivision.TransformCageData
Returns the flag indicating if transformer tool can be moved without transforming the selected cage topology.
CANNOT_CHANGE_GROOVE_TYPE - Static variable in class nxopen.uf.UFConstants
CANNOT_CHANGE_THD_DIRECTION - Static variable in class nxopen.uf.UFConstants
CANNOT_CHANGE_THD_FACE - Static variable in class nxopen.uf.UFConstants
CANNOT_CHANGE_THD_START_FACE - Static variable in class nxopen.uf.UFConstants
CANNOT_COMPUTE_BOUNDARY - Static variable in class nxopen.uf.UFConstants
CANNOT_FLIP - Static variable in class nxopen.routing.Run.FlipStatus
Run is deleted or there are no segments attached to component.
CANNOT_INIT_MODELER - Static variable in class nxopen.uf.UFConstants
CANNOT_SOLVE - Static variable in class nxopen.positioning.Constraint.SolverStatus
The constraint has invalid geometry and could not be passed to the solver
canOpenPart() - Method in interface nxopen.UI
Returns a flag indicating whether the NX user interface is in a state
where opening a part and making it the display part is supported.
canProjectCurves() - Method in interface nxopen.features.TextBuilder
Returns the flag indicating if curves can be projected
License requirements: None.
canReferenceText() - Method in interface nxopen.features.TextBuilder
Returns the flag indicating if text feature can reference a string expression
License requirements: None.
canRejectPointsAutomatically() - Method in interface nxopen.features.FitCurveBuilder
Returns the flag indicating if points beyond a threshold value should be ignored during fitting
License requirements: features_modeling ("FEATURES MODELING")
.
canRelocateToolToSelection() - Method in interface nxopen.features.subdivision.CopyCageBuilder
Returns the flag indicating if tool should relocate to selection
License requirements: None.
canRelocateToolToSelection() - Method in interface nxopen.features.subdivision.TransformCageData
Returns the flag indicating if transformer tool can be relocated based on cage topology selection.
canReorientToolToSelection() - Method in interface nxopen.features.subdivision.CopyCageBuilder
Returns the flag indicating if tool should reorient to selection
License requirements: None.
canReorientToolToSelection() - Method in interface nxopen.features.subdivision.TransformCageData
Returns the flag indicating if transformer tool can be reoriented based on cage topology selection.
canReverseDirection() - Method in interface nxopen.features.subdivision.CageSectionData
Returns the flag indicating if section direction is reversed.
canReverseDirection() - Method in interface nxopen.geometricutilities.BridgeCurveConnectivity
Returns the flag indicating if tangent direction is to be reversed
License requirements: None.
canReverseIntersectionCurve() - Method in interface nxopen.features.TextBuilder
Returns the flag indicating if intersection curve can be reversed
License requirements: None.
canSew() - Method in interface nxopen.features.subdivision.SubdivisionLoftBuilder
Returns the value indicating if open edges of the loft mesh can be sewn with selected input open edges.
canSew() - Method in interface nxopen.features.subdivision.SubdivisionRevolveBuilder
Returns the value indicating if open edges of the revolve mesh can be sewn with selected input open edges.
canSew() - Method in interface nxopen.features.subdivision.SubdivisionSweepBuilder
Returns the value indicating if open edges of the swept mesh can be sewn with selected input open edges.
canShowWeight() - Method in interface nxopen.preferences.SubdivisionModelingPreferences
Returns the flag indicating if the edge weights are displayed or not.
canStretchHeight() - Method in interface nxopen.blockstyler.Tree
Returns the CanStretchHeight.
CANT_DELETE_UNKNOWN - Static variable in class nxopen.routing.SingleDevice.DeleteObjectResult
Unknown error occurred while deleting.
CANT_USE_FIXED_DAXIS - Static variable in class nxopen.uf.UFConstants
canTypeHaveMatrix(int) - Method in interface nxopen.uf.UFObj
canUseAllPointsInPart() - Method in interface nxopen.features.FitCurveBuilder
Returns the flag indicating if all points in the part can be used for chaining
License requirements: None.
canUseFaceFinder() - Method in interface nxopen.features.MatchEdgeBuilder
Returns the synchronous mode
License requirements: None.
canUseFaceFinder() - Method in interface nxopen.features.StudioXformBuilderEx
Returns the using face finder flag
License requirements: None.
canUseKerningSpaces() - Method in interface nxopen.features.TextBuilder
Returns the flag indicating if kerning spaces can be used
License requirements: None.
canUseOrientationTool() - Method in interface nxopen.features.PolylineBuilder
Returns the flag indicating if WCS like tool should be deployed when a point or pole handle is selected
License requirements: None.
canUseOrientationTool() - Method in interface nxopen.features.StudioSplineBuilderEx
Returns the flag indicating if WCS like tool should be deployed when a point or pole handle is selected
License requirements: None.
CAP - Static variable in class nxopen.features.shipdesign.PillarBuilder.EndTreatmentTypes
caps are applied
CAP - Static variable in class nxopen.features.shipdesign.PillarBuilder.EndTypeOptions
Each end has different end cuts
capColor() - Method in interface nxopen.display.DynamicSectionBuilder
Returns the cap color.
capColor - Variable in class nxopen.ModelingView.OtherSectionAttrT
Deprecated.
capping color index from UG's color table
capColorOption() - Method in interface nxopen.display.DynamicSectionBuilder
Returns the cap color option
License requirements: None.
capDist - Variable in class nxopen.uf.UFSket.AskLegacyPreferencesData
capFace() - Method in interface nxopen.features.DeleteFaceBuilder
Returns the face or plane to be used as cap face.
capFace() - Method in interface nxopen.features.EmbossBodyBuilder
Returns the cap face used to trim
License requirements: None.
capOption() - Method in interface nxopen.features.DeleteFaceBuilder
Returns the cap option.
cappingFaces() - Method in interface nxopen.features.RibBuilder
Returns the capping datum or faces
License requirements: None.
capPlane() - Method in interface nxopen.features.DeleteFaceBuilder
Returns the new plane to be used as cap face.
capsList() - Method in interface nxopen.geometricutilities.BlendLimitsData
Returns the caps list
License requirements: None.
CAPSULE - Static variable in class nxopen.mechatronics.CollisionBodyBuilder.CollisionShapeTypes
Capsule
CAPTURE_DISTANCE - Static variable in class nxopen.uf.UFConstants
captureAndCreateAttachmentForSnapshot() - Method in interface nxopen.issue.IssueManager
Creates a
IssueAttachment for Snapshot
License requirements: nx_issue_mgmt ("NX Issue Tracking")
Created in NX9.0.0
Returns the area captured for movie creation.
captureArrangement(String, int) - Method in interface nxopen.motion.PostProcess
Capture or update an arrangement from motion result of active solution.
captureArrangement(String, int, int) - Method in interface nxopen.motion.PostProcess
Capture or update an arrangement from motion result of active solution.
captureArrangementFromCurrentSequence(String) - Method in interface nxopen.uf.UFAssem
CaptureArrangementFromCurrentSequenceData() - Constructor for class nxopen.uf.UFAssem.CaptureArrangementFromCurrentSequenceData
captureArrangementFromCurrentSequenceExtended(String, boolean) - Method in interface nxopen.uf.UFAssem
CaptureArrangementFromCurrentSequenceExtendedData() - Constructor for class nxopen.uf.UFAssem.CaptureArrangementFromCurrentSequenceExtendedData
captureFrame() - Method in interface nxopen.MovieManager
Use this method to capture a frame at a specified point.
captureMethod() - Method in interface nxopen.gateway.ImageCaptureBuilder
Returns the capture method
License requirements: None.
capType - Variable in class nxopen.ModelingView.OtherSectionAttrT
Deprecated.
Enable or disable capping
capType() - Method in interface nxopen.SketchOffsetBuilder
Returns the type of the cap needed at the corners
License requirements: None.
carBodyFaces() - Method in interface nxopen.features.vehicledesign.InnerAngleBuilder
Returns the selected car body faces for measurement.
carBodyFaces() - Method in interface nxopen.features.vehicledesign.OilPanBuilder
Returns the faces representing the car body geometry for the measurment.
carCsys() - Method in interface nxopen.HumanPosturePredictionBuilder
Returns the Car Coordinate System
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
cardName() - Method in interface nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder
Returns the card name
License requirements: None.
carGeometry() - Method in interface nxopen.features.vehicledesign.AllAroundVisionBuilder
Returns the faces representing the car geometry to use as obstructing elements.
CARTESIAN - Static variable in class nxopen.cae.AssignNodalCSBuilder.CSType
cartesian
CARTESIAN - Static variable in class nxopen.cae.PostGraphAlongPathBuilder.CsysType
CARTESIAN - Static variable in class nxopen.cam.InspectionSensorBuilder.SensorTipLocationTypes
Cartesian
CARTESIAN - Static variable in class nxopen.fields.SpatialMap.TypeEnum
Map to cartesian csys
CartesianCoordinateSystem - Interface in nxopen
CASCADE_BUTTON - Static variable in class nxopen.menubar.MenuButton.Type
CASCADE_MENU - Static variable in class nxopen.uf.UFUi.MenuType
CAST - Static variable in class nxopen.cae.optimization.TBSTopologyRestrictAreaBuilder.CheckTypeOption
Manufacturing restrictions to guarantee the manufacturing of the elements
castCondition() - Method in interface nxopen.cae.optimization.TBSTopologyRestrictAreaBuilder
Returns the cast condition
License requirements: None.
CastRelief - Interface in nxopen.die
Represents a cast relief feature
To create or edit an instance of this class, use
CastReliefBuilder
Created in NX6.0.0
Returns the cast relief builder of the draw die punch.
CastReliefParentBuilder - Interface in nxopen.die
Represents a Die Cast Relief sub feature.
CastReliefParentBuilder.CastReliefData - Class in nxopen.die
CATALOG - Static variable in class nxopen.AttributeTemplatesBuilder.TemplatesOptions
Templates currently residing in the loaded catalog.
catalog() - Method in interface nxopen.tooling.DieBaseBuilder
Returns the die base catalog.
CATALOG - Static variable in class nxopen.tooling.ForceCalculationBuilder.ProcessTypes
catalog
catalogFilename() - Method in interface nxopen.AttributeTemplatesBuilder
Returns the catalog filename.
category() - Method in interface nxopen.annotations.BalloonNoteBuilder
Returns the category
License requirements: None.
category() - Method in interface nxopen.annotations.CoordinateNoteBuilder
Returns the category
License requirements: None.
category() - Method in interface nxopen.annotations.GeneralNoteBuilder
Returns the category
License requirements: None.
category() - Method in interface nxopen.annotations.MaterialSpecificationBuilder
Returns the category
License requirements: None.
category() - Method in interface nxopen.annotations.SpecificNoteBuilder
Returns the category
License requirements: None.
CATEGORY - Static variable in class nxopen.assemblies.DesignElementBuilder.EditActionType
category() - Method in interface nxopen.AttributePropertiesBaseBuilder
Returns the category.
category() - Method in interface nxopen.AttributeTemplatesBuilder
Returns the category.
Category - Class in nxopen.cae.optimization
Represents the category type
Category - Interface in nxopen.layer
Represents a layer category.
category() - Method in interface nxopen.mechatronics.CollisionBodyBuilder
Returns the category.
category() - Method in interface nxopen.mechatronics.CollisionSensorBuilder
Returns the category.
category - Variable in class nxopen.NXObject.AttributeInformation
Attribute category (may be null)
category() - Method in interface nxopen.pdm.DesignElementRevision
Returns the category for design element.
category() - Method in interface nxopen.pdm.EffectivityAttributePropertiesBuilder
Returns the category.
category() - Method in interface nxopen.validate.OverrideBuilder
Returns the category of override request.
CategoryCollection - Interface in nxopen.layer
Represents a collection of layer categories
To obtain an instance of this class, refer to
BasePart
Created in NX3.0.0
Returns the category name of check result.
categoryType() - Method in interface nxopen.cae.optimization.DAOConstraintBuilder
Returns the category type
License requirements: None.
categoryType() - Method in interface nxopen.cae.optimization.DAOObjective
Returns the category type
License requirements: None.
Catiav4Creator - Interface in nxopen
Catiav4Creator.SolidBodyOutputOption - Class in nxopen
Options for outputing solid bodies to CATIA V4
Catiav4Importer - Interface in nxopen
Catiav5Creator - Interface in nxopen
Catiav5Creator.ExportFromOption - Class in nxopen
Export from options
Catiav5Importer - Interface in nxopen
CAVITY - Static variable in class nxopen.tooling.MWDesignPartingSurfaceBuilder.TrimAndExtendFromRegionType
From cavity region
CAVITY_CORE - Static variable in class nxopen.tooling.WorkpieceBuilder.WorkPieceType
The method adds the standards of cavity and core
CAVITY_MILL_INHERIT_TRIM_BNDS - Static variable in class nxopen.cam.CAMObject.Attr
CAVITY_ONLY - Static variable in class nxopen.tooling.WorkpieceBuilder.WorkPieceType
The method adds the standards of cavity
CAVITY_REGION - Static variable in class nxopen.tooling.MWMoldedPartValidationBuilder.AssignToRegion
assign selected region faces to the Cavity region
cavityDepth() - Method in interface nxopen.die.ThroatChildBuilder
Returns the distance measured from the bend profile of the flange to the
base of the throat.
CavityMilling - Interface in nxopen.cam
Represents a Cavity Milling Operation
To create or edit an instance of this class, use
CavityMillingBuilder
Created in NX7.5.0
Returns the offset distance measured from the Throat CSYS to the back
cavity area of the throat.
caxis() - Method in interface nxopen.cam.AlongMachineAxisMoveBuilder
Returns the C position
License requirements: None.
CAXIS - Static variable in class nxopen.uf.UFPath.Axis
CB_TERMINATE - Static variable in class nxopen.uistyler.DialogResponse
Callback routine has terminated.
cboreDepth - Variable in class nxopen.features.Hole.CounterboreHoleData
Expression for counterbore depth
cboreDiameter - Variable in class nxopen.features.Hole.CounterboreHoleData
Expression for counterbore diameter
CCI - Static variable in class nxopen.geometricutilities.SmartVolumeProfileBuilder.CloseProfileRuleType
For subtract boolean operation,
extends the open profile to form the last complete intersection
if the profile lies outside the target excluding the coincident portion.
CCLW - Static variable in class nxopen.cam.MillingToolBuilder.ToolDirectionTypes
CCLW
cCollectorId - Variable in class nxopen.uf.UFModlFeatures.AskCurveMesh1Data
cCollectorId - Variable in class nxopen.uf.UFModlFeatures.AskThruCurves1Data
CDF - Interface in nxopen
Represents a
CDF , which is a representation of an NX color palette.
Ceiling to Floor
cellFormatType() - Method in interface nxopen.annotations.TableCellStyleBuilder
Returns the cell format
License requirements: None.
cellPrefs - Variable in class nxopen.uf.UFPlist.ColPrefs
CellPrefs() - Constructor for class nxopen.uf.UFTabnot.CellPrefs
CellPrefs(UFTabnot.Format, int, boolean, UFTabnot.ZeroDisplay, int, double, double, UFTabnot.Just, UFTabnot.Just, double, double, boolean, boolean, boolean, double, double, boolean, int, int, int[], int[], int, UFTabnot.FitMethod[], Tag, int, int, int, String, String, String, String, boolean) - Constructor for class nxopen.uf.UFTabnot.CellPrefs
cells() - Method in interface nxopen.annotations.BaseTitleBlockBuilder
Returns the cells
License requirements: None.
cellText - Variable in class nxopen.uf.UFDraw.TabnotCellParams
CENTER - Static variable in class nxopen.annotations.HoleTableSettingsLabelBuilder.RelativeLocationType
Center
CENTER - Static variable in class nxopen.annotations.LeaderVerticalAttachment
Attach vertically to the center of the annotation
CENTER - Static variable in class nxopen.annotations.StackVerticalAlignment
Align vertically along center of text box
CENTER - Static variable in class nxopen.annotations.TableCellStyleBuilder.BorderLocationType
CENTER - Static variable in class nxopen.annotations.TextJustification
CENTER - Static variable in class nxopen.cae.MeshControlBuilder.ProgressionTypes
CENTER - Static variable in class nxopen.cae.xyplot.TextAlignment
Center align text
center - Variable in class nxopen.Conic.OrientationData
CENTER - Static variable in class nxopen.DatumConstraint.Type
center() - Method in interface nxopen.die.HandlingCoreChildBuilder
Returns the center of the handling core.
center() - Method in interface nxopen.die.HeelpostBuilder
Returns the location (center) for the heelpost
License requirements: None.
center() - Method in interface nxopen.die.HoleChildBuilder
Returns the center of the die hole.
CENTER - Static variable in class nxopen.display.DecalBuilder.Anchor
anchor in the middle of decal image
CENTER - Static variable in class nxopen.drawings.MultipleViewPlacementBuilder.Option
By Center
CENTER - Static variable in class nxopen.drawings.StandardViewsBuilder.Placement
CENTER - Static variable in class nxopen.features.DatumAxisBuilder.ConstraintType
Center constraint
CENTER - Static variable in class nxopen.features.DatumPlaneBuilder.ConstraintType
Center constraint
CENTER - Static variable in class nxopen.features.shipdesign.ProfileBuilder.Alignment
CENTER - Static variable in class nxopen.features.shipdesign.StandardPartItemBuilder.Direction
center
CENTER - Static variable in class nxopen.features.shipdesign.StiffenerBuilder.EdgeReinforcementAlignmentMethod
Center the Edge Reinforcement on the selected edge
CENTER - Static variable in class nxopen.geometricutilities.CurveRangeBuilder.AnchorPositionType
Anchor at the center of the curve
center() - Method in interface nxopen.geometricutilities.CurveRangeBuilder
Returns the center
License requirements: None.
CENTER - Static variable in class nxopen.geometricutilities.FrameOnPathBuilder.AnchorLocationType
Center position
CENTER - Static variable in class nxopen.geometricutilities.ShapeFrameBuilder.AnchorAttachmentType
Anchor is attached to the center of the frame
CENTER - Static variable in class nxopen.geometricutilities.SurfaceRangeBuilder.AnchorPositionType
Anchor at the center of the surface
CENTER - Static variable in class nxopen.HumanData.SideType
Indicate the center of human
CENTER - Static variable in class nxopen.InferSnapType.SnapType
Snap point center of arc
center - Variable in class nxopen.markup.Circle.CenterAndRadiusData
center - Variable in class nxopen.markup.Ellipse.CenterAndRadiusData
center - Variable in class nxopen.markup.Rectangle.CenterLengthAndWidthData
CENTER - Static variable in class nxopen.PlaneTypes.MethodType
Center method
CENTER - Static variable in class nxopen.PlotBuilder.JustificationOption
Center Justify
CENTER - Static variable in class nxopen.PlotBuilder.XdisplayOption
X dimension center
CENTER - Static variable in class nxopen.PlotBuilder.YdisplayOption
Y dimension center
center - Variable in class nxopen.uf.UFCurve.Conic
CENTER - Static variable in class nxopen.uf.UFCurve.EndType
center - Variable in class nxopen.uf.UFEval.Arc
center - Variable in class nxopen.uf.UFEval.Ellipse
center - Variable in class nxopen.uf.UFEval.Hyperbola
center - Variable in class nxopen.uf.UFEval.Parabola
center - Variable in class nxopen.uf.UFUi.Attachment
center() - Method in interface nxopen.weld.WeldFillStripBuilder
Returns the center of the fill strip.
CENTER12 - Static variable in class nxopen.positioning.Constraint.Type
One geometry is positioned mid-way between two others
CENTER22 - Static variable in class nxopen.positioning.Constraint.Type
An implicit plane between two geometries of one movable object is positioned mid-way between two others
CENTER_ALONG_ROTARYAXIS - Static variable in class nxopen.cam.BladeCutStart.Type
center along rotaryaxis
CENTER_ALTERNATE_CEILING_FIRST - Static variable in class nxopen.cam.GrooveMillingBuilder.LevelSequencingType
Center Alternate, Ceiling First
CENTER_ALTERNATE_FLOOR_FIRST - Static variable in class nxopen.cam.GrooveMillingBuilder.LevelSequencingType
Center Alternate, Floor First
CENTER_AND_LENGTHS - Static variable in class nxopen.features.ToolingBoxBuilder.Types
block with center point and lengths
CENTER_CEILING_FLOOR - Static variable in class nxopen.cam.GrooveMillingBuilder.LevelSequencingType
Start in Center then Ceiling then Floor
CENTER_FLOOR_CEILING - Static variable in class nxopen.cam.GrooveMillingBuilder.LevelSequencingType
Start in Center then Floor then Ceiling
CENTER_GRAVITY_X - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
Center of gravity for the X-direction
CENTER_GRAVITY_Y - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
Center of gravity for the Y-direction
CENTER_GRAVITY_Z - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
Center of gravity for the Z-direction
CENTER_HOLE - Static variable in class nxopen.cam.HoleBossGeom.HoleBossTypes
Type: Center Hole
CENTER_LEFT - Static variable in class nxopen.annotations.HoleTableSettingsLabelBuilder.RelativeLocationType
Center Left
CENTER_LINE - Static variable in class nxopen.annotations.OffsetCenterPointBuilder.Display
center line
CENTER_LINE - Static variable in class nxopen.cae.MarkerType0d
CENTER_LINE - Static variable in class nxopen.cae.ModelDisplayBuilder.FreeEdgeMarker
Center line marker
CENTER_LINE - Static variable in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeMarker
Center line marker
CENTER_LINE - Static variable in class nxopen.cae.xyplot.PointMarker
Center line marker
CENTER_LINE - Static variable in class nxopen.features.sheetmetal.BendBuilder.BendLocationOptions
CENTER_LINE - Static variable in class nxopen.features.shipdesign.InverseBendingLinesBuilder.NeutralMethodType
Center line.
CENTER_LINE - Static variable in class nxopen.preferences.ViewVisualizationVisual.SmoothEdgeFont
CENTER_LINE - Static variable in class nxopen.weld.JointmarkGuideBuilder.Location
Centerline
CENTER_LINE_WITH_EXTENSION - Static variable in class nxopen.annotations.OffsetCenterPointBuilder.Display
center line with extension
CENTER_OF_BOUNDING_BOX - Static variable in class nxopen.preferences.SessionAssemblies.DragHandlePositionOption
CENTER_OF_EDGE - Static variable in class nxopen.features.sheetmetal.FlangeBuilder.WidthTypeOptions
The flange is centered on the edge.
CENTER_OF_MASS - Static variable in class nxopen.HumanData.EditDisplayBodyParts
Indicate edit display body parts named center of mass
CENTER_OF_MASS - Static variable in class nxopen.HumanData.InverseKinematicsBodyParts
Indicate inverse kinematics body parts named center of mass
CENTER_OF_MASS - Static variable in class nxopen.motion.Marker.MarkerType
Defines the center of mass for a link.
CENTER_OF_ROTATION - Static variable in class nxopen.uf.UFDisp.PolyMarker
CENTER_OF_ROTATION - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
CENTER_OPPOSITE_ROTARYAXIS - Static variable in class nxopen.cam.BladeCutStart.Type
center opposite rotaryaxis
CENTER_PLUS_RHO - Static variable in class nxopen.features.EdgeBlendBuilder.Conic
CENTER_PLUS_RHO - Static variable in class nxopen.geometricutilities.ConicCrossSection.DefineMethod
conic shape controlled by center and rho values
CENTER_POINT - Static variable in class nxopen.annotations.OffsetCenterPointBuilder.Display
center point
CENTER_POINT_AND_DIAMETER - Static variable in class nxopen.features.SphereBuilder.Types
Represents the type of sphere created by providing center point and diameter.
CENTER_POINT_DIRECTION - Static variable in class nxopen.geometricutilities.SupportPlaneData.LockPlaneStatus
Lock support plane using center point and direction, this option should be used for Center Radius Arc only
CENTER_RADIUS - Static variable in class nxopen.features.AestheticFaceBlendBuilder.CenterType
Center radius option.
CENTER_RADIUS - Static variable in class nxopen.features.SectionSurfaceBuilderEx.CircularType
Center Radius mode
CENTER_RIGHT - Static variable in class nxopen.annotations.HoleTableSettingsLabelBuilder.RelativeLocationType
Center Right
CENTER_VERTEX - Static variable in class nxopen.uf.UFSket.GeomVertex
CenterAndRadiusData() - Constructor for class nxopen.markup.Circle.CenterAndRadiusData
CenterAndRadiusData() - Constructor for class nxopen.markup.Ellipse.CenterAndRadiusData
centerChordLaw() - Method in interface nxopen.features.AestheticFaceBlendBuilder
Returns the center chord law
License requirements: None.
centerControlFlat() - Method in interface nxopen.features.NSidedSurfaceBuilder
Returns the center control flat
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
centerControlTiltX() - Method in interface nxopen.features.NSidedSurfaceBuilder
Returns the center control tilt x direction
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
centerControlTiltY() - Method in interface nxopen.features.NSidedSurfaceBuilder
Returns the center control tilt y direction
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
centerControlTrimFlat() - Method in interface nxopen.features.NSidedSurfaceBuilder
Returns the center control flat for trimming
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
centerControlX() - Method in interface nxopen.features.NSidedSurfaceBuilder
Returns the center control x direction
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
centerControlY() - Method in interface nxopen.features.NSidedSurfaceBuilder
Returns the center control y direction
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
centerControlZ() - Method in interface nxopen.features.NSidedSurfaceBuilder
Returns the center control z direction
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
centerCoordinate() - Method in interface nxopen.drawings.DrawingViewBuilder
Returns the center coordinate
License requirements: None.
centerCross() - Method in interface nxopen.annotations.OffsetCenterPointBuilder
Returns the center cross size
License requirements: None.
centerCurve() - Method in interface nxopen.cam.FlowBuilder
Returns the Cleanup Output, Tool End Boundary
License requirements: None.
centerCurve() - Method in interface nxopen.features.StyledBlendBuilder
Returns the center curve
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
centerCurveEnd() - Method in interface nxopen.features.StyledBlendBuilder
Returns the center curve end
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
centerCurveStart() - Method in interface nxopen.features.StyledBlendBuilder
Returns the center curve start
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
CENTERED - Static variable in class nxopen.features.vehicledesign.CrashBarrierBuilder.CrossPositionType
CENTERED_LOOP_HEM_TYPE - Static variable in class nxopen.features.sheetmetal.HemFlangeBuilder.TypeOptions
CENTERED_SEAM_WELD - Static variable in class nxopen.annotations.LineWeldBuilder.IdLineType
CENTERED_SPOT_WELD - Static variable in class nxopen.annotations.LineWeldBuilder.IdLineType
CENTERED_TYPE - Static variable in class nxopen.uf.UFNxsm.FlangeWidthOption
centerFlag - Variable in class nxopen.uf.UFDrf.WeldSymbols
centerHeight() - Method in interface nxopen.features.shipdesign.DeckBuilder
Returns the expression containing the overall height of the camber shape at the center
of the ship in the selected plane.
centerHole() - Method in interface nxopen.die.PadChildBuilder
Returns the center hole switch of the die pad, if true the center hole will be created in the pad, if false it will not.
centerHole() - Method in interface nxopen.die.PadParentBuilder
Returns the center hole switch of die pads, if true the center hole will be created in the pads, if false they will not.
centeringMarkExtension() - Method in interface nxopen.drawings.BordersAndZonesBuilder
centeringMarkLength() - Method in interface nxopen.drawings.SheetBorderSettingsBuilder
Returns the centering mark length
License requirements: None.
centeringMarksColorWidth() - Method in interface nxopen.drawings.SheetBorderSettingsBuilder
Returns the centering marks color width
License requirements: None.
centeringMarksExtension() - Method in interface nxopen.drawings.SheetBorderSettingsBuilder
Returns the centering marks extension
License requirements: None.
centeringMarksHorizontal() - Method in interface nxopen.drawings.SheetBorderSettingsBuilder
Returns the centering marks horizontal
License requirements: None.
centeringMarksVertical() - Method in interface nxopen.drawings.SheetBorderSettingsBuilder
Returns the centering marks vertical
License requirements: None.
CenterLengthAndWidthData() - Constructor for class nxopen.markup.Rectangle.CenterLengthAndWidthData
CENTERLINE - Static variable in class nxopen.annotations.AssociativityLineOption
Centerline -
Linear
Bolt circle
Circular
centerline() - Method in interface nxopen.annotations.BaseFrameBarBuilder
Returns the centerline
License requirements: None.
Centerline - Interface in nxopen.annotations
Represents a drafting centerline
This is an abstract class.
CENTERLINE - Static variable in class nxopen.annotations.EditSymbolDisplayBuilder.FontTypes
Centerline
CENTERLINE - Static variable in class nxopen.annotations.PmiFilterByType.Type
Indicates a PMI centerline type
CENTERLINE - Static variable in class nxopen.assemblies.ProductOutlineBuilder.LineFont
Center Line
CENTERLINE - Static variable in class nxopen.cae.ModelDisplayBuilder.FreeEdgeFont
Centerline font
CENTERLINE - Static variable in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeFont
Centerline font
centerline() - Method in interface nxopen.die.DrawBeadBuilder
Returns the section containing the centerline of the bead.
CENTERLINE - Static variable in class nxopen.display.GridBuilder.LineStyleType
CENTERLINE - Static variable in class nxopen.DisplayableObject.ObjectFont
CENTERLINE - Static variable in class nxopen.drawings.CustomViewSettingsBuilder.Font
CenterLine
CENTERLINE - Static variable in class nxopen.drawings.DrawingCompareSettingsBuilder.FontType
CENTERLINE - Static variable in class nxopen.drawings.SectionLineStyleBuilder.FontStyle
Deprecated.
centerLine() - Method in interface nxopen.features.OffsetEmbossBuilder
Returns the center line:
An existing curve/path on the sheet that defines the full extent of the offset feature required.
CENTERLINE - Static variable in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Font
Centerline Font.
CENTERLINE - Static variable in class nxopen.fields.DisplayPropertiesBuilder.IndepDomDispType
CENTERLINE - Static variable in class nxopen.fields.DisplayPropertiesBuilder.LineFontEnum
Centerline
CENTERLINE - Static variable in class nxopen.fields.DisplayPropertiesBuilder.ValuesEnum
CENTERLINE - Static variable in class nxopen.LineFontBuilder.LineFontType
Centerline line font
CENTERLINE - Static variable in class nxopen.preferences.Font
Centerline
CENTERLINE - Static variable in class nxopen.preferences.PartDrafting.FontType
CenterLine
CENTERLINE - Static variable in class nxopen.preferences.PartModeling.GridKnotLineFontType
CENTERLINE - Static variable in class nxopen.preferences.PartObject.LineFontType
Centerline
CENTERLINE - Static variable in class nxopen.preferences.SessionModeling.PolylineStyleType
CENTERLINE - Static variable in class nxopen.routing.StockBuilder.StockStyleType
Centreline
CENTERLINE - Static variable in class nxopen.routing.StockStyleBuilder.StockStyle
centerline() - Method in interface nxopen.SketchConstraintBuilder
Returns the centerline for a symmetric constraint type
License requirements: None.
centerLine() - Method in interface nxopen.SketchMakeSymmetricBuilder
Returns the function returns the center line of a symmetric constraint.
centerLine() - Method in interface nxopen.SketchMirrorBuilder
Returns the center line.
CENTERLINE - Static variable in class nxopen.uf.UFDisp.PolyMarker
CENTERLINE - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
CENTERLINE - Static variable in class nxopen.ViewDependentDisplayManager.Font
CENTERLINE - Static variable in class nxopen.weld.WeldBeadPathBuilder.OffsetMethodType
centerline of overlapping sheets
Centerline2d - Interface in nxopen.annotations
Represents a 2D centerline
To create or edit an instance of this class, use
Centerline2dBuilder
Created in NX6.0.0
Builder for creating 2D Centerline.
Centerline2dBuilder.Offset - Class in nxopen.annotations
the valid types of 2D Centerline offset method
Centerline2dBuilder.Types - Class in nxopen.annotations
the valid types of 2D Centerline, applicable only for creation
Centerline2dSettingsBuilder - Interface in nxopen.annotations
Represents a Builder for Centerline2dSettings.
Centerline3d - Interface in nxopen.annotations
Represents a 3D centerline
To create or edit an instance of this class, use
Centerline3dBuilder
Created in NX6.0.0
Builder for creating 3D Centerline.
Centerline3dBuilder.Offset - Class in nxopen.annotations
the valid types of 3D Centerline offset method
Centerline3dSettingsBuilder - Interface in nxopen.annotations
Represents a Builder for Centerline3dSettings.
CENTERLINE_COMPONENT_LINE_TYPE - Static variable in class nxopen.uf.UFDrf.ObjectAssocLineType
CENTERLINE_Y - Static variable in class nxopen.annotations.FrameBarElements
CenterlineBuilder - Interface in nxopen.annotations
Represents a Base Centerline Builder for all types of centerlines
This is an abstract class, and cannot be instantiated.
CenterlineCollection - Interface in nxopen.annotations
centerlineCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
Returns the centerline compare
License requirements: None.
centerlineCycle() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
Returns the centerline cycle
License requirements: None.
CenterlineData() - Constructor for class nxopen.die.RibChildBuilder.CenterlineData
CenterlineDrillTurning - Interface in nxopen.cam
Represents a Centerline Drill Turning operation
To create or edit an instance of this class, use
CenterlineDrillTurningBuilder
Created in NX7.5.0
the centerline cycle types .
CenterlineDrillTurningBuilder.DepthReferenceTypes - Class in nxopen.cam
the depth reference option types .
CenterlineDrillTurningBuilder.DepthTypes - Class in nxopen.cam
the depth option types .
CenterlineDrillTurningBuilder.DrillingLocationTypes - Class in nxopen.cam
the drilling location .
CenterlineDrillTurningBuilder.DwellTypes - Class in nxopen.cam
the dwell modes .
CenterlineDrillTurningBuilder.FinalRetractTypes - Class in nxopen.cam
the retract types for simulated cycles .
CenterlineDrillTurningBuilder.OutputOptionTypes - Class in nxopen.cam
the output option .
CenterlineDrillTurningBuilder.RemovalIncrementTypes - Class in nxopen.cam
the removal increment types .
CenterlineDrillTurningBuilder.SpindleStopTypes - Class in nxopen.cam
the spindle stop types .
CenterlineDrillTurningBuilder.StartPositionTypes - Class in nxopen.cam
the start position .
CenterlineDrillVariableIncrementBuilder - Interface in nxopen.cam
Represents a Turn Avoidance Path Points Builder .
CenterlineDrillVariableIncrementBuilder.VariableIncrementListData - Class in nxopen.cam
centerlineInfo - Variable in class nxopen.uf.UFDrf.AskCenterlineInfoData
CenterlineInfo() - Constructor for class nxopen.uf.UFDrf.CenterlineInfo
CenterlineInfo(int, UFDrf.DraftAidLine[], int, UFDrf.ArcInfo[], int, UFDrf.AssocInfo[]) - Constructor for class nxopen.uf.UFDrf.CenterlineInfo
centerlineLeft() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarWizardBuilder
Returns the left B Pillar centerline geometry.
centerlineLeft() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarWizardBuilder
Returns the left additional pillar centerline geometry.
centerlineLength() - Method in interface nxopen.die.ClampingSlotBuilder
Returns the length from the location to the flange
License requirements: None.
centerlineLength() - Method in interface nxopen.tooling.WireHoleBuilder
Returns the centerline length to create wire hole
License requirements: None.
centerlineOrigin - Variable in class nxopen.uf.UFDrf.AskCenterlineInfoData
centerlineProjection() - Method in interface nxopen.die.DrawBeadBuilder
Returns the projection method to apply to the centerline to place it on the sewn faces.
centerlineRight() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarWizardBuilder
Returns the right B Pillar centerline geometry.
centerlineRight() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarWizardBuilder
Returns the right additional pillar centerline geometry.
centerlines() - Method in interface nxopen.annotations.AnnotationManager
Centerlines collection .
centerLines() - Method in interface nxopen.drawings.ViewCreationWizardBuilder
Returns the center lines
License requirements: None.
centerlines() - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
Returns the centerlines toggle on the GENERAL tab of the View Style Dialog
License requirements: None.
centerlines() - Method in interface nxopen.preferences.GeneralViewPreferences
Returns the status of center line.
centerLines - Variable in class nxopen.uf.UFSmd.FpPrefs
CenterlineSettingsBuilder - Interface in nxopen.annotations
Represents a Builder for Centerline Settings.
CenterlineSettingsBuilder.CenterlineThickness - Class in nxopen.annotations
the types of centerline thickness
centerlineSlotAttributes() - Method in interface nxopen.die.DieShoeBuilder
Returns the centerline slot attributes
License requirements: None.
centerlineSlotCreate() - Method in interface nxopen.die.DieShoeBuilder
Returns the toggle to create the centerline slot
License requirements: None.
centerlineSlotDepth() - Method in interface nxopen.die.DieShoeBuilder
Returns the centerline slot depth
License requirements: None.
centerlineSlotDirection() - Method in interface nxopen.die.DieShoeBuilder
Returns the centerline slot direction
License requirements: None.
centerlineSlotWidth() - Method in interface nxopen.die.DieShoeBuilder
Returns the centerline slot width
License requirements: None.
centerlineSymbolCfw - Variable in class nxopen.uf.UFDrf.SymbolPreferences
centerlineSymbolColor() - Method in interface nxopen.annotations.SymbolStyleBuilder
Returns the centerline symbol color
License requirements: None.
centerlineSymbolWidth() - Method in interface nxopen.annotations.SymbolStyleBuilder
Returns the centerline symbol width
License requirements: None.
centerlineType - Variable in class nxopen.uf.UFDrf.AskCenterlineInfoData
centerlineXyOffset() - Method in interface nxopen.die.RibChildBuilder
Returns the centerline xy offset of the die rib.
centerlineXyOffset() - Method in interface nxopen.die.RibParentBuilder
Returns the centerline xy offset of die ribs.
centerlineYLabelColor() - Method in interface nxopen.annotations.FrameBarPreferences
Returns the label color
License requirements: None.
centerlineYLabelFont() - Method in interface nxopen.annotations.FrameBarPreferences
Returns the label font
License requirements: None.
centerlineYLabelItalicized() - Method in interface nxopen.annotations.FrameBarPreferences
Returns the label italicized
License requirements: None.
centerlineYLabelWidth() - Method in interface nxopen.annotations.FrameBarPreferences
Returns the label width
License requirements: None.
centerlineYStyle() - Method in interface nxopen.annotations.FrameBarStyleBuilder
Returns the style centerline y
License requirements: None.
centerlineYTicColor() - Method in interface nxopen.annotations.FrameBarPreferences
Returns the tic color
License requirements: None.
centerlineYTicDisplay() - Method in interface nxopen.annotations.FrameBarPreferences
Returns the _centerline y tic display type
License requirements: None.
centerlineYTicFont() - Method in interface nxopen.annotations.FrameBarPreferences
Returns the tic font
License requirements: None.
centerlineYTicLength() - Method in interface nxopen.annotations.FrameBarPreferences
Returns the tic length
License requirements: None.
centerlineYTicWidth() - Method in interface nxopen.annotations.FrameBarPreferences
Returns the tic width
License requirements: None.
centerLoadBendingStressMaximum(double, double, double, double) - Method in interface nxopen.EngineeringFunction
Calculate the maximum bending stress under a center load.
centerLoadDisplacement(double, double, double, double, double) - Method in interface nxopen.EngineeringFunction
Calculate the displacement under a center load.
centerLoadDisplacementMaximum(double, double, double, double) - Method in interface nxopen.EngineeringFunction
Calculate the maximum displacement under a center load.
centerLoadMoment(double, double, double) - Method in interface nxopen.EngineeringFunction
Calculate the moment under a center load.
centerLoadMomentMaximum(double, double) - Method in interface nxopen.EngineeringFunction
Calculate the maximum moment under a center load.
centerLoadShearForce(double, double, double) - Method in interface nxopen.EngineeringFunction
Calculate the shear force under a center load.
centerLoadShearForceMaximum(double, double) - Method in interface nxopen.EngineeringFunction
Calculate the maximum shear force under a center load.
centerLoadSlope(double, double, double, double, double) - Method in interface nxopen.EngineeringFunction
Calculate the slope under a center load.
centerLoadSlopeMaximum(double, double, double, double) - Method in interface nxopen.EngineeringFunction
Calculate the maximum slope under a center load.
CenterMark - Interface in nxopen.annotations
Represents a center mark class
To create or edit an instance of this class, use
CenterMarkBuilder
Created in NX6.0.0
Builder for creating Center Mark.
CenterMarkSettingsBuilder - Interface in nxopen.annotations
Represents a Builder for CenterMark Settings.
centerNode(NXObject) - Method in interface nxopen.weld.ConnectionFinderBuilder
Adjusts the display of the part and fits the selected weld points in the center of the graphics window.
centerOfGravity() - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
Returns the center of gravity
License requirements: None.
centerOfMass - Variable in class nxopen.uf.UFWeight.Properties
centerOption() - Method in interface nxopen.features.AestheticFaceBlendBuilder
Returns the center option
License requirements: None.
centerPoint() - Method in interface nxopen.annotations.ArcComponent
Returns the arc center point in absolute coordinates.
CENTERPOINT - Static variable in class nxopen.annotations.CircleCenterlineBuilder.Types
Centerline using Centerpoint Method
centerPoint() - Method in interface nxopen.cam.CircularAboutAxisMoveBuilder
Returns the center
License requirements: None.
centerPoint() - Method in interface nxopen.cam.LaserCutoutDefinition
Returns the Center Point
License requirements: None.
centerPoint() - Method in interface nxopen.Conic
Returns the center.
centerPoint() - Method in interface nxopen.features.AssociativeArcBuilder
Returns the center point
License requirements: None.
centerPoint() - Method in interface nxopen.features.BlendCornerBuilder
Returns the center point.
centerPoint() - Method in interface nxopen.features.OffsetEmbossBuilder
Returns the center point:
An existing point on the input sheet body is selected as the reference from which the feature is defined.
centerPoint() - Method in interface nxopen.features.SphereBuilder
Returns the center point of the Sphere.
centerPoint() - Method in interface nxopen.features.StudioXformBuilder
centerPoint() - Method in interface nxopen.geometricutilities.CircularPattern
centerPoint() - Method in interface nxopen.mechatronics.TransportSurfaceBuilder
Returns the center point
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
centerPoint() - Method in interface nxopen.SketchEllipseBuilder
Returns the center point
License requirements: None.
centerPoint() - Method in interface nxopen.SketchPolygonBuilder
Returns the center point
License requirements: None.
centerPoint - Variable in class nxopen.uf.UFDisp.TextureSpaceInfo
centerPointOption() - Method in interface nxopen.die.PierceTaskBuilder
Returns the center point output option of the pierce task
License requirements: die_engineering ("DIE ENGINEERING")
.
centerPointReference() - Method in interface nxopen.features.AssociativeArcBuilder
Returns the center point reference
License requirements: None.
centerPointReferenceCsys() - Method in interface nxopen.features.AssociativeArcBuilder
Returns the center point reference coordinate system
License requirements: None.
centerRadiusLaw() - Method in interface nxopen.features.AestheticFaceBlendBuilder
Returns the center radius law
License requirements: None.
centerRadiusLockedPlaneDirection() - Method in interface nxopen.features.AssociativeArcBuilder
centerSymbol() - Method in interface nxopen.annotations.LineWeldData
Returns the flag indicating whether the weld symbol is at center of
reference line, applicable only to spot and seam symbols
License requirements: None.
CENTIGRADE - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.TemperatureUnitsOptions
Use Centigrade
CENTIMETERS - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.LinearUnitsOptions
Use centimeters
CENTRAL_EUROPEAN - Static variable in class nxopen.features.TextBuilder.ScriptOptions
Specifies a Eastern European character set
centralAngle() - Method in interface nxopen.die.QuickBinderBuilder
Returns the central angle of a cylinder/cone.
CENTRED - Static variable in class nxopen.features.sheetmetal.SheetmetalManagerFlangeWidthOption
centred
centrifugalForce(double, double, double) - Method in interface nxopen.EngineeringFunction
Calculate the centrifugal force from velocity, radius and mass.
CENTROID - Static variable in class nxopen.cae.responsesimulation.DataLocation.Element
CENTROID - Static variable in class nxopen.cae.responsesimulation.ElementLocation
CENTROID - Static variable in class nxopen.cae.Result.ElementValueCriterion
CENTROID - Static variable in class nxopen.MeasureBodies.ActiveValue
centroid() - Method in interface nxopen.MeasureBodies
Returns the centroid point of the measurement
License requirements: None.
centroid - Variable in class nxopen.uf.UFFltr.AskBoxOfAssyData
centroid - Variable in class nxopen.uf.UFFltr.AskBoxZoneData
centroid - Variable in class nxopen.uf.UFSf.BodyAskVolumeAndCentroidData
CERAMICS - Static variable in class nxopen.PhysicalMaterial.Category
Ceramics
CERT_PT_NA_TYPE - Static variable in class nxopen.uf.UFProcessAid.Types
CERT_PT_TYPE - Static variable in class nxopen.uf.UFProcessAid.Types
CERTIFICATION_POINT - Static variable in class nxopen.uf.UFConstants
CERTIFICATION_POINT_NON_ASSOC - Static variable in class nxopen.uf.UFConstants
cFaceId - Variable in class nxopen.uf.UFModlFeatures.AskCurveMeshData
cFaceId - Variable in class nxopen.uf.UFModlFeatures.AskThruCurvesData
CfdContactPreventionConstraint - Interface in nxopen.cae
The contact prevention constraint is a type of constraint which is used by the
Fluid Domain Recipe to generate a fluid domain.
CfdContactPreventionConstraintBuilder - Interface in nxopen.cae
CfdContactPreventionConstraintBuilder.LocalSubdivisions - Class in nxopen.cae
The local subdivision.
CfdContactPreventionConstraintBuilder.Priority - Class in nxopen.cae
The priority level.
CfdContactPreventionConstraintBuilder.Sizing - Class in nxopen.cae
The sizing option.
CfdContactPreventionConstraintCollection - Interface in nxopen.cae
Provides methods for managing Contact Prevention Constraints
CAE.CfdContactPreventionConstraint in a fem part
To obtain an instance of this class, refer to
BaseFEModel
Created in NX9.0.0
Returns the fluid domain contact prevention constraint collection belonging to this fem part .
CfdLocalResolutionConstraint - Interface in nxopen.cae
The local resolution constraint is a type of constraint which is used by the
Fluid Domain Recipe to generate a fluid domain.
CfdLocalResolutionConstraintBuilder - Interface in nxopen.cae
CfdLocalResolutionConstraintBuilder.LocalSubdivisions - Class in nxopen.cae
The local subdivision.
CfdLocalResolutionConstraintBuilder.Priority - Class in nxopen.cae
The priority level.
CfdLocalResolutionConstraintBuilder.ResolutionDensity - Class in nxopen.cae
The Resolution density type.
CfdLocalResolutionConstraintBuilder.Sizing - Class in nxopen.cae
The sizing option.
CfdLocalResolutionConstraintCollection - Interface in nxopen.cae
Provides methods for managing Local Resolution Constraints
CAE.CfdLocalResolutionConstraint in a fem part
To obtain an instance of this class, refer to
BaseFEModel
Created in NX9.0.0
Returns the fluid domain local resolution constraint collection belonging to this fem part .
cfi() - Method in interface nxopen.UFSession
cFlag - Variable in class nxopen.uf.UFModlFeatures.AskCurveMesh1Data
cFlag - Variable in class nxopen.uf.UFModlFeatures.AskCurveMeshData
cFlag - Variable in class nxopen.uf.UFModlFeatures.AskThruCurves1Data
cFlag - Variable in class nxopen.uf.UFModlFeatures.AskThruCurvesData
cfw - Variable in class nxopen.annotations.Lettering
Color, font, and width for lettering
Cfw() - Constructor for class nxopen.uf.UFDrf.Cfw
Cfw(int, int, UFDrf.LineWidth) - Constructor for class nxopen.uf.UFDrf.Cfw
cfw - Variable in class nxopen.uf.UFDrf.Lettering
CgfxAttr - Interface in nxopen.display
CgfxAttrCollection - Interface in nxopen.display
CgfxAttributeValueColor3Builder - Interface in nxopen.display
CgfxAttributeValueColor4Builder - Interface in nxopen.display
CgfxAttributeValueFileBuilder - Interface in nxopen.display
CgfxAttributeValueFloat3Builder - Interface in nxopen.display
CgfxAttributeValueFloat4Builder - Interface in nxopen.display
CgfxAttributeValueIntegerBuilder - Interface in nxopen.display
CgfxAttributeValueNumberBuilder - Interface in nxopen.display
cgfxAttrs() - Method in interface nxopen.BasePart
Returns the Display.CgfxAttrCollection instance belonging to this part
Created in NX5.0.6
cgfxMattex() - Method in interface nxopen.BasePart
Returns the Display.CgfxMattexCollection instance belonging to this part
Created in NX5.0.6
CgfxMattex - Interface in nxopen.display
CgfxMattexBuilder - Interface in nxopen.display
CgfxMattexBuilder.Technique - Class in nxopen.display
Deprecated.
The technique is an index to a technique name in a list found in the CgFX file.
CgfxMattexBuilder.TextureSpace - Class in nxopen.display
CgfxMattexBuilder.TextureSpaceShader - Class in nxopen.display
Deprecated.
The texture space shader type indicates the type of texture space shader to use for CgFX shader
CgfxMattexBuilder.UseCameraDirectionPlane - Class in nxopen.display
Deprecated.
The option indicates which texture space vectors are updated upon Update Texture to Camera Direction action
CgfxMattexCollection - Interface in nxopen.display
CGM - Static variable in class nxopen.DxfdwgCreator.ExportAsOption
export as cgm
cgm() - Method in interface nxopen.UFSession
CGM_FORMAT - Static variable in class nxopen.uf.UFPlot.Format
CGMBuilder - Interface in nxopen
Represents a
CGMBuilder to be used when exporting the Current Display
or drawing sheets to a CGM.
Specifies the action option to be used when running Teamcenter
CGMBuilder.Color - Class in nxopen
Specifies the color option to use when creating the CGM
CGMBuilder.ImageResolutionOption - Class in nxopen
Specifies the image resolution when exporting a raster image
CGMBuilder.MultipleOption - Class in nxopen
Specifies how to export multiple drawing sheets in Native mode
CGMBuilder.OutputTextOption - Class in nxopen
Specifies the text option, as either text or polylines
CGMBuilder.RelationOption - Class in nxopen
Specifies the relation to use when exporting a CGM to Teamcenter
CGMBuilder.SizeOption - Class in nxopen
Specifies the size option of the CGM.
CGMBuilder.UnitsOption - Class in nxopen
Specifies which units are associated to the dimensions
CGMBuilder.Vdc - Class in nxopen
Specifies the VDC coordinates to use when creating the CGM
CGMBuilder.Width - Class in nxopen
Specifies the primary selection of which type of width assignment to use.
CGMImporter - Interface in nxopen
Used to import a CGM file into the work part.
CHAIN - Static variable in class nxopen.annotations.DimensionSetBuilder.DimensionSetMethod
Part of a chain
CHAIN - Static variable in class nxopen.annotations.DimensionType
Chain dimension
CHAIN - Static variable in class nxopen.annotations.SearchCriteriaDimensionBuilder.DimensionTypes
Chain
CHAIN - Static variable in class nxopen.features.sheetmetal.ContourFlangeBuilder.SweepTypeOptions
CHAIN - Static variable in class nxopen.geometricutilities.ReduceSurfaceRadiusBuilder.FaceSelectionSpecification
chain1Continuity() - Method in interface nxopen.features.AestheticFaceBlendBuilder
Returns the chain 1 continuity
License requirements: None.
chain2Continuity() - Method in interface nxopen.features.AestheticFaceBlendBuilder
Returns the chain 2 continuity
License requirements: None.
chainAllPoints() - Method in interface nxopen.features.FitCurveBuilder
Chains all the points in work part based on one selected point and evaluates the curve.
chainData - Variable in class nxopen.uf.UFModl.ReblendFaceData
ChainDimension - Interface in nxopen.annotations
Represents a chain dimension.
chained - Variable in class nxopen.uf.UFModl.ReblendFace
CHAINED_POINTS - Static variable in class nxopen.features.FitCurveBuilder.TargetSourceTypes
Chain using one or two points
ChainedPoints() - Constructor for class nxopen.uf.UFUi.ChainedPoints
ChainedPoints(double[], Tag) - Constructor for class nxopen.uf.UFUi.ChainedPoints
chaining() - Method in interface nxopen.features.sheetmetal.BendTaperBuilder
chainingrule - Variable in class nxopen.ApparentChainingRule.Data
Selection Intent method, either of Connected Curves, Tangent Curves or Single Curve.
chainingtolerance - Variable in class nxopen.ApparentChainingRule.Data
Gap tolerance
chainingTolerance() - Method in interface nxopen.features.ExtrudeBuilder
Returns the chaining tolerance
License requirements: None.
chainingTolerance() - Method in interface nxopen.features.SweepAlongGuideBuilder
Returns the chaining tolerance
License requirements: None.
chainingTolerance() - Method in interface nxopen.Section
Returns the chaining tolerance
License requirements: gateway ("UG GATEWAY")
.
chainOffset() - Method in interface nxopen.annotations.DimensionPreferences
Returns the offset between dimension lines of chain dimensions
License requirements: None.
chainOffset() - Method in interface nxopen.annotations.DimensionStyleBuilder
Returns the offset between dimension lines of chain dimensions
License requirements: None.
chainOffset - Variable in class nxopen.uf.UFDrf.DimensionPreferences
chainOffset - Variable in class nxopen.uf.UFDrf.DimensionPreferences1
chainSelectedCurves() - Method in interface nxopen.routing.ConnectedCurvesBuilder
Finds all curves attached end-to-end with the current list of selected
curves.
ChainsetAndStatusData() - Constructor for class nxopen.features.EdgeBlendBuilder.ChainsetAndStatusData
ChainsetData() - Constructor for class nxopen.features.EdgeBlendBuilder.ChainsetData
chainWithinFeature() - Method in interface nxopen.blockstyler.SectionBuilder
Returns the ChainWithinFeature
License requirements: None.
chainWithinFeature() - Method in interface nxopen.blockstyler.SuperSection
Returns the ChainWithinFeature
License requirements: None.
CHAMFER - Static variable in class nxopen.annotations.DimensionType
Chamfer dimension
CHAMFER - Static variable in class nxopen.annotations.SearchCriteriaDimensionBuilder.DimensionTypes
Chamfer
Chamfer - Interface in nxopen.features
Represents a chamfer feature.
CHAMFER - Static variable in class nxopen.features.sheetmetal.CornerTreatmentBuilder.CornerTreatmentType
CHAMFER - Static variable in class nxopen.features.StepBuilder.StepTypes
Adds a step at the edge of a face similar to a chamfer
CHAMFER - Static variable in class nxopen.tooling.CornerDesignBuilder.CornerTypeOpt
chamfer
CHAMFER_AFTER - Static variable in class nxopen.annotations.TextComponent.TextType
chamfer text after
CHAMFER_ANGLE - Static variable in class nxopen.annotations.TextComponent.TextType
chamfer angle symbol text
CHAMFER_BEFORE - Static variable in class nxopen.annotations.TextComponent.TextType
chamfer text before
CHAMFER_EQUAL_SETBACK - Static variable in class nxopen.features.sheetmetal.BreakCornerBuilder.TypeOptions
CHAMFER_FORM_ANGLESIZE - Static variable in class nxopen.uf.UFDrf.ChamferDimensionForm
CHAMFER_FORM_SIZE - Static variable in class nxopen.uf.UFDrf.ChamferDimensionForm
CHAMFER_FORM_SIZEANGLE - Static variable in class nxopen.uf.UFDrf.ChamferDimensionForm
CHAMFER_FORM_SYMBOL - Static variable in class nxopen.uf.UFDrf.ChamferDimensionForm
CHAMFER_HOLE - Static variable in class nxopen.cam.HoleBossGeom.HoleBossTypes
Type: Chamfer Hole
CHAMFER_LINEAR_CHAMFER_DIM - Static variable in class nxopen.uf.UFDrf.ChamferDimensionLeaderType
CHAMFER_NONE_SYMBOL - Static variable in class nxopen.uf.UFDrf.ChamferDimensionSymbolType
CHAMFER_PARALLEL_LEADER - Static variable in class nxopen.uf.UFDrf.ChamferDimensionLeaderType
CHAMFER_PERPENDICULAR_LEADER - Static variable in class nxopen.uf.UFDrf.ChamferDimensionLeaderType
CHAMFER_PREFIX_SYMBOL - Static variable in class nxopen.uf.UFDrf.ChamferDimensionSymbolType
CHAMFER_SIZE - Static variable in class nxopen.annotations.TextComponent.TextType
chamfer size text
CHAMFER_SUFFIX_SYMBOL - Static variable in class nxopen.uf.UFDrf.ChamferDimensionSymbolType
CHAMFER_TEXTABOVE_LEADER_NOSTUB - Static variable in class nxopen.uf.UFDrf.ChamferDimensionStubType
CHAMFER_TEXTABOVE_STUB - Static variable in class nxopen.uf.UFDrf.ChamferDimensionStubType
CHAMFER_TEXTAFTER_LEADER_NOSTUB - Static variable in class nxopen.uf.UFDrf.ChamferDimensionStubType
CHAMFER_TEXTAFTER_STUB - Static variable in class nxopen.uf.UFDrf.ChamferDimensionStubType
CHAMFER_TOOL - Static variable in class nxopen.cam.MillToolBuilder.CutterSubtypes
Chamfer MillTool
CHAMFER_XSYMBOL - Static variable in class nxopen.annotations.TextComponent.TextType
chamfer x symbol text
chamferAngle() - Method in interface nxopen.tooling.CornerDesignBuilder
Returns the chamfer angle.
chamferBothSides() - Method in interface nxopen.features.shipdesign.PlateChamferBuilder
Returns the chamfer both sides
License requirements: None.
ChamferBuilder - Interface in nxopen.features
Represents the chamfer builder data.
ChamferBuilder.ChamferOption - Class in nxopen.features
This enum represents the chamfer parameter options
ChamferBuilder.OffsetMethod - Class in nxopen.features
This enum represents the offset method options
ChamferDimension - Interface in nxopen.annotations
Represents a chamfer dimension
To create or edit an instance of this class, use
ChamferDimensionBuilder
Created in NX4.0.0
Represents chamfer dimension preferences .
chamferDistance() - Method in interface nxopen.die.FlangeSteelRibChildBuilder
Returns the chamfer distance of the Flange Steel Rib
License requirements: ug_die_design ("Die Design")
.
chamferDistance() - Method in interface nxopen.die.FlangeSteelRibParentBuilder
Returns the chamfer distance of the Flange Steel Ribs
License requirements: ug_die_design ("Die Design")
.
chamferEnabled() - Method in interface nxopen.features.CurveFinderBuilder
Returns a value that indicates whether add chamfer relation recognition for the last curves added to curve collector
License requirements: None.
chamferFace() - Method in interface nxopen.features.LabelChamferBuilder
Returns the chamfer face
License requirements: None.
chamferFeed() - Method in interface nxopen.cam.FeedsTurnBuilder
Returns the chamfer feed builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
ChamferForm - Class in nxopen.annotations
Specifies the chamfer dimension form
chamferForm() - Method in interface nxopen.annotations.DimensionStyleBuilder
Returns the chamfer dimension form
License requirements: None.
ChamferLeaderPlacement - Class in nxopen.annotations
Specifies the chamfer dimension leader placement relative to the chamfer
chamferLeaderType() - Method in interface nxopen.annotations.DimensionStyleBuilder
Returns the chamfer dimension leader type
License requirements: None.
chamferLengthBuilder() - Method in interface nxopen.cam.MillToolBuilder
Returns the Chamfer Length (inheritable double)
License requirements: None.
ChamferMilling - Interface in nxopen.cam
Represents a Chamfer Milling Operation
To create or edit an instance of this class, use
ChamferMillingBuilder
Created in NX9.0.2
Returns the chamfer options that specify what type of chamfer is to be created
License requirements: drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
chamferOrientation() - Method in interface nxopen.annotations.BaseChamferDimension
Returns a value of chamfer dimension linear leader parallel
License requirements: None.
ChamferOrientationType - Class in nxopen.annotations
Specifies the linear chamfer dimension orientation
chamferSeparator() - Method in interface nxopen.annotations.DimensionStyleBuilder
Returns the chamfer separator type
License requirements: None.
ChamferSeparatorType - Class in nxopen.annotations
Specifies the chamfer dimension separator type
chamferSpaceFactor() - Method in interface nxopen.annotations.DimensionStyleBuilder
Returns the chamfer dimension space factor
License requirements: None.
ChamferStubType - Class in nxopen.annotations
Specifies the chamfer dimension stub type
chamferStubType() - Method in interface nxopen.annotations.DimensionStyleBuilder
Returns the chamfer dimension stub type
License requirements: None.
chamferSymbolName() - Method in interface nxopen.annotations.DimensionStyleBuilder
Returns the chamfer dimension symbol name
License requirements: None.
ChamferSymbolPlacement - Class in nxopen.annotations
Specifies the chamfer dimension symbol placement
chamferSymbolType() - Method in interface nxopen.annotations.DimensionStyleBuilder
Returns the chamfer dimension symbol type
License requirements: None.
chamferType() - Method in interface nxopen.features.ResizeChamferBuilder
Returns the chamfer type
License requirements: None.
CHANGE_DEGREE - Static variable in class nxopen.features.StudioXformBuilder.AdvancedMethodType
Deprecated.
Change degree
CHANGE_LAYER_TO_SELECTABLE - Static variable in class nxopen.DisplayManager.LayerSetting
Change the layer to selectable if it is invisible
CHANGE_PART - Static variable in class nxopen.uistyler.FileOperationData.FileOperationType
Chaneg part file operation
CHANGE_STATION - Static variable in class nxopen.tooling.ScrapDesignBuilder.EditScrapType
Changes the station number of scraps
CHANGE_TYPE - Static variable in class nxopen.tooling.ScrapDesignBuilder.ScrapDefType
The type of scrap will be changed between Piercing and Piloting
CHANGE_WORK_PART_REASON - Static variable in class nxopen.uf.UF.CallbackReason
changeAllBoundaryConstraints() - Method in interface nxopen.features.StyledCornerBuilder
Returns the flag indicating to apply to all constraints
License requirements: None.
changeAllSizes() - Method in interface nxopen.tooling.EnlargeSurfaceBuilder
Returns the value of option, which specifies when enlarging surface, whether to change all the sizes at the same time or not.
changeApproachRetract() - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder
Returns a flag to indicate whether to change approach and retract distances to avoid collisions
License requirements: None.
changeBoundaryFacesColor() - Method in interface nxopen.tooling.MWSearchRegionBuilder
Change the color of the selected boundary using the specified color
License requirements: None.
changeBoxSize() - Method in interface nxopen.tooling.TrimSolidBuilder
Returns the option to change the created boundbox size
License requirements: None.
changeByName(String, Component[]) - Method in interface nxopen.assemblies.ComponentAssembly
changeColScrap() - Method in interface nxopen.tooling.ScrapDesignBuilder
Returns the changing color of scrap
License requirements: None.
changeComponentVisibility() - Method in interface nxopen.assemblies.ConstraintDisplayBuilder
Returns the flag indicating whether or not a Show Only operation should be done on the connecting
components.
changeConfig(String, String[], String[]) - Method in interface nxopen.issue.IssueList
Changes the config of
IssueList
License requirements: nx_issue_mgmt ("NX Issue Tracking")
Created in NX9.0.0
Change the region name for the current region
License requirements: None.
changeDegree(NXObject) - Method in interface nxopen.features.StudioXformBuilder
changeDegree(NXObject) - Method in interface nxopen.features.StudioXformBuilderEx
changeDegreeWithParameters(NXObject, int, int, int, int) - Method in interface nxopen.features.StudioXformBuilderEx
Changes degree of the selected xform object with desired parameters
License requirements: studio_free_form ("STUDIO FREE FORM")
.
changedObjs - Variable in class nxopen.uf.UFClear.Summary
changedPairs - Variable in class nxopen.uf.UFClear.Summary
changeEdgeDensity(NXObject, int) - Method in interface nxopen.cae.MappedMeshBuilder
Returns the edge density
License requirements: None.
changeEntitiesColor(TaggedObject[], int) - Method in interface nxopen.tooling.MWDefineRegionsBuilder
Change the color of displayable entities
License requirements: None.
changeFacesSideOption(boolean) - Method in interface nxopen.features.GuidedExtensionBuilderEx
Changes the option for the side of faces
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
changeFeatureType(int) - Method in interface nxopen.weld.CharacteristicsBuilder
changeFeatureType(CharacteristicsBuilder.Type) - Method in interface nxopen.weld.CharacteristicsBuilder
Change the type of feature defining the attributes.
changeFlexibility(NXObject) - Method in interface nxopen.features.StudioXformBuilder
changeFlexibility(NXObject) - Method in interface nxopen.features.StudioXformBuilderEx
Changes flexibility of the selected xform object
License requirements: studio_free_form ("STUDIO FREE FORM")
.
changeGuideLineDirectionAndLength(Curve, Vector3d, double) - Method in interface nxopen.features.GuidedExtensionBuilderEx
Changes the direction and length of a guide line.
changeGuideLineDirectionAndLength(Curve, Vector3d, double) - Method in interface nxopen.tooling.GuidedExtensionBuilder
Changes the direction and length of a guide line.
changeHarness(HarnessDevice) - Method in interface nxopen.routing.electrical.ElectricalStockDevice
Adds this stockdevice as child of given HarnessDevice.
changeInterpartReferences(String, String) - Method in interface nxopen.ExpressionCollection
Changes all of the references in the part "owning_part" from expressions
in the part "old_part_name" to expressions in the part "new_part_name".
changeInterpartReferences(String, String, boolean, boolean) - Method in interface nxopen.ExpressionCollection
Changes all of the references in the part "owning_part" from expressions
in the part "old_part_name" to expressions in the part "new_part_name".
changeLayout(Layout) - Method in interface nxopen.LayoutCollection
Sets the given layout as current layout
License requirements: None.
ChangeList - Interface in nxopen.options
Records changes to option values at the specified level.
ChangeMaterial - Interface in nxopen.mechatronics
Represents the Change material constraint.
ChangeMaterialBuilder - Interface in nxopen.mechatronics
ChangeMaterialCollection - Interface in nxopen.mechatronics
Represents a collection of Change Material Constraint.
changeMaterials() - Method in interface nxopen.mechatronics.PhysicsManager
changeName(String) - Method in interface nxopen.HumanReachZone
Change reach zone name
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
changeOffsetBaseFace(Tag, Tag) - Method in interface nxopen.uf.UFModlFeatures
CHANGEOVER - Static variable in class nxopen.tooling.QuickQuotationBuilder.DesignTypes
the design is a changeover
ChangeoverManagementBuilder - Interface in nxopen.tooling
ChangeoverManagementBuilder.Types - Class in nxopen.tooling
Specifies the types of changeover management.
changeoverName() - Method in interface nxopen.tooling.ChangeoverManagementBuilder
Returns the name of the to-be-created changeover.
ChangeOwnerBuilder - Interface in nxopen.mechatronics
changePartingObjectType(int) - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
Change the type of parting objects to be placed or edited.
changeProbeAngles() - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder
Returns a flag to indicate whether to change probe angles to avoid collisions
License requirements: None.
changeProbeTip() - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder
Returns a flag to indicate whether to change probe tip to avoid collisions
License requirements: None.
changeRadius() - Method in interface nxopen.die.QuickBinderWrapBuilder
Returns the change radius value
License requirements: None.
changeReferencePatternTemplate(int, int) - Method in interface nxopen.assemblies.ComponentPattern
Changes the template component of a reference pattern to a pattern member at indices (firstBaseInstanceIndex, secondBaseInstanceIndex).
changeRegionFacesColor(String, int, int) - Method in interface nxopen.tooling.MWDefineRegionsBuilder
Change the color of the faces of a region
License requirements: None.
changeRegionLayer(String, int) - Method in interface nxopen.tooling.MWDefineRegionsBuilder
Change the layer of the region
License requirements: None.
changeSectionCurve() - Method in interface nxopen.features.EditCrossSectionBuilder
Change the section curves.
changeSectionPlane(Curve, nxopen.Direction) - Method in interface nxopen.die.AddendumSectionBuilder
Changes the section orientation.
ChangeShellThickness - Interface in nxopen.features
ChangeShellThicknessBuilder - Interface in nxopen.features
changeStates(StateInfo[], boolean) - Method in interface nxopen.layer.LayerManager
Changes the states of the specified layers in the part.
changeStates(StateInfo[]) - Method in interface nxopen.layer.LayerManager
Changes the states of the specified layers in the part.
changeStatus - Variable in class nxopen.uf.UFModl.ParentDispInfo
changeType(int) - Method in interface nxopen.formboard.ShapeSegmentBuilder
License requirements: routing_harness ("Routing Harness")
.
changeViewOrientation() - Method in interface nxopen.preferences.SessionSketch
Returns the change view orientation flag.
changeViewOrientation() - Method in interface nxopen.weld.WeldFillBuilder
Returns the indication if the view orientation should be changed automatically (true)
upon initial creation of rectangles, or not (false)
License requirements: None.
changeWallThickness() - Method in interface nxopen.features.StepBuilder
Returns the change wall thickness
License requirements: None.
CHANNEL - Static variable in class nxopen.die.AddendumSectionBuilder.SectionShapeType
Section consists of all segments in a channel shape.
CHANNEL - Static variable in class nxopen.tooling.CoolingDefineChannelBuilder.Types
CHANNEL_TUNNEL_CAP - Static variable in class nxopen.die.AddendumSectionBuilder.SurfaceBuildType
Create channel tunnel cap surface.
CHANNEL_TUNNEL_CAP - Static variable in class nxopen.die.AddSurfBuilder.Methods
To close an end cap.
channelAdjust() - Method in interface nxopen.tooling.ToolingManager
Returns the ChannelAdjustCollection instance belonging to this part .
ChannelAdjustBuilder - Interface in nxopen.tooling
The builder class for Channel Adjust which assists you
to adjust the postion and the length of the channel.
ChannelAdjustBuilder.AdjustType - Class in nxopen.tooling
the adjust method.
ChannelAdjustBuilder.VectorMethod - Class in nxopen.tooling
the vector adjust method.
ChannelAdjustCollection - Interface in nxopen.tooling
Creates a ChannelAdjust Collection
To obtain an instance of this class, refer to
ToolingManager
Created in NX7.0.0
Returns the selected channel body color.
channelColor() - Method in interface nxopen.tooling.SpecifyCircuitBuilder
Returns the circuit channel body color.
ChannelColorData() - Constructor for class nxopen.tooling.SpecifyBaffleBuilder.ChannelColorData
channelDiameter() - Method in interface nxopen.tooling.CoolingDefineChannelBuilder
Returns the channel diameter
License requirements: None.
channelDiameter() - Method in interface nxopen.tooling.CoolingPatternBuilder
Returns the channel diameter
License requirements: None.
channelFitting() - Method in interface nxopen.tooling.ToolingManager
Returns the ChannelFittingCollection instance belonging to this part .
ChannelFittingBuilder - Interface in nxopen.tooling
The builder class for Channel Fitting which assists you
to add cooling fitting.
ChannelFittingCollection - Interface in nxopen.tooling
Creates a ChannelFitting Collection
To obtain an instance of this class, refer to
ToolingManager
Created in NX7.0.0
Returns the lines used to create the channel path.
channelName() - Method in interface nxopen.cam.OperationBuilder
Returns the channel's name
License requirements: None.
channelName() - Method in interface nxopen.cam.ToolBuilder
Returns the channel's name
License requirements: None.
channels() - Method in interface nxopen.tooling.SpecifyBaffleBuilder
Returns the channel or body to assign new attributes.
channelType() - Method in interface nxopen.tooling.SpecifyBaffleBuilder
Returns the type to specify the Cooling fittings types: oil, air or water.
CHAR - Static variable in class nxopen.pdm.PdmSoaqueryNxmgrfielddatatype
Char type
CHARACTER - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.VarTypes
Specifies a character variable
characteristic() - Method in interface nxopen.annotations.FeatureControlFrameBuilder
Returns the characteristic
License requirements: None.
CharacteristicInformation() - Constructor for class nxopen.routing.CharacteristicList.CharacteristicInformation
CharacteristicInformation(NXObject.AttributeType, String) - Constructor for class nxopen.routing.CharacteristicList.CharacteristicInformation
Constructor for the CharacteristicInformation object.
CharacteristicList - Interface in nxopen.routing
Contains a list of characteristics.
CharacteristicList.CharacteristicInformation - Class in nxopen.routing
Contains the type and name of a characteristic
characteristicPreferences() - Method in interface nxopen.preferences.RoutingApplicationView
Preferences related to option/required characteristics.
characteristics() - Method in interface nxopen.weld.DatumCommonBuilder
Returns the characteristics.
characteristics() - Method in interface nxopen.weld.JointmarkBuilder
Returns the characteristics
License requirements: ugweld ("UG WELD")
.
characteristics() - Method in interface nxopen.weld.PlugSlotBuilder
Returns the characteristics
License requirements: None.
characteristics() - Method in interface nxopen.weld.SurfaceWeldBuilder
Returns the characteristics to assign to the object created.
characteristics() - Method in interface nxopen.weld.UserDefinedWeldBuilder
Returns the characteristics.
characteristics() - Method in interface nxopen.weld.WeldBeadBuilder
Returns the characteristics to assign to the object created.
characteristics() - Method in interface nxopen.weld.WeldFillBuilder
Returns the characteristics information.
characteristics() - Method in interface nxopen.weld.WeldGrooveBuilder
Returns the characteristics
License requirements: ugweld ("UG WELD")
.
CharacteristicsBuilder - Interface in nxopen.weld
This builder allows you to define the attribute values to be set on the
output of the weld feature.
CharacteristicsBuilder.Type - Class in nxopen.weld
The custom type of the datum specified for creation.
CharacteristicsSelectionBuilder - Interface in nxopen.weld
This builder allows you to define the attribute values to be set on the
output of the weld feature.
CharacteristicsValueBuilder - Interface in nxopen.weld
The object containing the information about the attribute to be
placed on the output of the weld feature.
CharacteristicsValueBuilder.Type - Class in nxopen.weld
Settings to indicate the type of value contained in the attribute.
characteristicType() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
Returns the characteristic enum
License requirements: None.
characterSize() - Method in interface nxopen.PlotBuilder
Returns the character size of the banner.
characterSize() - Method in interface nxopen.preferences.PartVisualizationNamesBorders
Returns the character size.
CharacterSpaceFactor - Class in nxopen.annotations
Specifies the standard font character space factor for each of the text types
CharacterSpaceFactor() - Constructor for class nxopen.annotations.CharacterSpaceFactor
CharacterSpaceFactor(double, double, double, double) - Constructor for class nxopen.annotations.CharacterSpaceFactor
Constructor for the CharacterSpaceFactor object.
characterSpaceFactor - Variable in class nxopen.annotations.Lettering
Multiplier applied to font's standard character spacing
characterSpaceFactor - Variable in class nxopen.uf.UFDrf.Lettering
characterSpacing() - Method in interface nxopen.annotations.ChamferDimensionPreferences
Returns the space between the text characters or symbols as a factor of the character size
License requirements: None.
charactersToSkip() - Method in interface nxopen.annotations.HoleTableSettingsLabelBuilder
Returns the characters to skip
License requirements: None.
charactersToSkip - Variable in class nxopen.uf.UFPlist.Prefs
CHARCOAL_GRAY_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
CharDesc() - Constructor for class nxopen.uf.UFRoute.CharDesc
CharDesc(String, int) - Constructor for class nxopen.uf.UFRoute.CharDesc
charSize - Variable in class nxopen.uf.UFSket.AskLegacyPreferencesData
charSize - Variable in class nxopen.uf.UFSket.AskPreferencesData
charSpaceFactor - Variable in class nxopen.uf.UFTabnot.CellPrefs
charSpacing - Variable in class nxopen.uf.UFUgfont.FontHeader
charToSkip() - Method in interface nxopen.annotations.PartsListBuilder
Returns the characters to skip specifies the characters to be skipped for callouts
License requirements: None.
charx - Variable in class nxopen.uf.UFRoute.AskAppViewOptCharxData
charx - Variable in class nxopen.uf.UFRoute.AskAppViewReqCharxData
chasePasses() - Method in interface nxopen.cam.ThreadCutParameters
Returns the chase passes
License requirements: None.
CHECK - Static variable in class nxopen.blockstyler.Wizard.SubNodeAction
Sub-node has been checked if a checkbox was specified.
CHECK - Static variable in class nxopen.cae.optimization.TBSSmoothBuilder.SelfIntersectionCheckingOption
Check once
CHECK - Static variable in class nxopen.cam.Preferences.GeometryTypes
check
CHECK - Static variable in class nxopen.cam.TeachmodeProfileMoveBuilder.StartStopPositionMethods
Use selected check geometry
check() - Method in interface nxopen.geometricanalysis.DeviationChecking
Performs deviation checking.
CHECK - Static variable in class nxopen.uf.UFCam.GeomType
check(Tag) - Method in interface nxopen.uf.UFParam
CHECK_AND_STOP_AT_FIRST_ERROR - Static variable in class nxopen.cae.SimSolution.SetupCheckOption
perform set up checks but stop at first error
CHECK_CLEARANCES - Static variable in class nxopen.tooling.ClearanceManagementBuilder.Type
CHECK_GEOM_COLOR - Static variable in class nxopen.uf.UFCamPref.CamPref
CHECK_GEOM_TYPE - Static variable in class nxopen.uf.UFCamPref.CamPref
CHECK_MATE_RESULT_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
Check-Mate result
checkAllComponents() - Method in interface nxopen.cae.modelcheck.ModelSetupCheckBuilder
Returns the value indicating whether to check all components associated with the assembly FEM in the
model check, regardless of load status.
checkAndMovePlanes(nxopen.features.Feature, nxopen.features.Feature, ISurface, ISurface) - Method in interface nxopen.die.TrimTaskBuilder
Move end planes if the position of Trim Task is changed.
CheckAndMovePlanesData() - Constructor for class nxopen.die.TrimTaskBuilder.CheckAndMovePlanesData
checkArrayStatus(Tag) - Method in interface nxopen.uf.UFAssem
checkAttributeStatus(Tag) - Method in interface nxopen.uf.UFFam
checkBoundary() - Method in interface nxopen.cam.FaceMillingBuilder
Returns the check boundary
License requirements: None.
checkBoundary() - Method in interface nxopen.cam.MillBoundaryGeomBuilder
Returns the check boundary
License requirements: None.
checkBoundaryCondition() - Method in interface nxopen.cae.optimization.TBSShapeRestrictAreaBuilder
Returns a value indicating whether to accept nodes of boundary condition as constraint
License requirements: None.
checkButton() - Method in interface nxopen.mechatronics.ChangeOwnerBuilder
Check the action is valid or not, and give the report in an information window.
checkClearance() - Method in interface nxopen.features.sheetmetal.AeroLighteningCutoutBuilder
Returns the check clearance
License requirements: None.
checkCollision() - Method in interface nxopen.tooling.RunSimulationBuilder
Returns the check collision
License requirements: None.
checkColor() - Method in interface nxopen.cam.Preferences
Returns the check color
License requirements: None.
checkCosimLicense(boolean) - Method in interface nxopen.motion.MotionEnvironment
Checks the co-simulation license
License requirements: mechanisms ("MECHANISMS")
.
checkCriteriaAngle() - Method in interface nxopen.geometricanalysis.ExamineGeometry
Returns the Check Criteria Angle
License requirements: None.
checkCriteriaDistance() - Method in interface nxopen.geometricanalysis.ExamineGeometry
Returns the Check Criteria Distance
License requirements: None.
checkDesignRules(DesignRuleViolationCollection.Mode, DesignRuleViolationCollection.Reason, NXObject[]) - Method in interface nxopen.routing.RouteManager
Executes the Routing Design Rules against the work part
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
checkDesignRules(int, int, int, Tag[]) - Method in interface nxopen.uf.UFRoute
CheckDesignRulesData() - Constructor for class nxopen.uf.UFRoute.CheckDesignRulesData
checkDof() - Method in interface nxopen.cae.optimization.TBSShapeRestrictAreaBuilder
Returns a value indicating whether to restrict the dispacement in the coordinate direction of the referenced coordinate system
License requirements: None.
CHECKED - Static variable in class nxopen.features.shipdesign.ManufacturingStockBuilder.CheckBoxStatus
Checked
CHECKED_GDT - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ToleranceSource
Checked Gdt
checkedBody() - Method in interface nxopen.tooling.UnfoldingSimulationBuilder
Returns the body that will do static interference check with selected bend face body
License requirements: None.
checkedElements() - Method in interface nxopen.cae.optimization.TBSShapeRestrictAreaBuilder
Returns the elements checked for penetration
License requirements: None.
checkedObjectsList() - Method in interface nxopen.cae.ProjectNodesToCadGeometryBuilder
Returns the selected objects for checking.
checkedoutobjects - Variable in class nxopen.assemblies.ComponentAssembly.CheckedoutStatusOfObjectsData
Array of NXObjects which are open in session and checked out
checkedoutobjects - Variable in class nxopen.assemblies.ComponentAssembly.CheckoutAllModifiedObjectsData
Array of NXObjects checked out
CheckedoutStatusOfObjectsData() - Constructor for class nxopen.assemblies.ComponentAssembly.CheckedoutStatusOfObjectsData
checkedPairs - Variable in class nxopen.uf.UFClear.Summary
checkElementGroup() - Method in interface nxopen.cae.optimization.TBSShapeRestrictAreaBuilder
Returns a value indicating whether to check elements for penetration
License requirements: None.
checkElementSizeOption() - Method in interface nxopen.cae.Mesh3dTetBuilder
Returns the check element size option.
checkFamilyStatus(Tag) - Method in interface nxopen.uf.UFFam
checkFlexbodyLicense(boolean) - Method in interface nxopen.motion.MotionEnvironment
Checks the flexible body dynamic license
License requirements: mechanisms ("MECHANISMS")
.
checkFluteLength() - Method in interface nxopen.cam.HoleMakingBuilder
Returns the check flute length flag
License requirements: None.
checkForDuplicates() - Method in interface nxopen.routing.TransformPathBuilder
Returns the flag that indicates whether or not to check for duplicate segments after the copy or transform.
checkForInvalidParentModelView() - Method in interface nxopen.drawings.DraftingView
Checks the view's validity by looking at the parent model view
License requirements: drafting ("DRAFTING")
.
checkForSymmetry() - Method in interface nxopen.cae.DependentMeshBuilder
Check for symmetry
License requirements: nx_masterfem ("Finite Element Modeling")
.
checkForTinyEdges() - Method in interface nxopen.cae.DependentMeshBuilder
Check tiny edges
License requirements: nx_masterfem ("Finite Element Modeling")
.
checkFreeEdges() - Method in interface nxopen.cae.modelcheck.ElementEdgeCheckBuilder
Returns the value indicating whether to check free edges or not
License requirements: None.
checkGap(NXObject[]) - Method in interface nxopen.tooling.TraverseLoopBuilder
Calculate the gap between last selected objects and existing loop string, and find out the nearest end point.
CheckGapData() - Constructor for class nxopen.tooling.TraverseLoopBuilder.CheckGapData
checkGeomColor - Variable in class nxopen.uf.UFCam.Preferences
checkGeometry() - Method in interface nxopen.cam.MillGeomBuilder
Returns the check geometry builder
License requirements: None.
checkGeometry() - Method in interface nxopen.cam.PlanarOperationBuilder
Returns the check geometry builder
License requirements: None.
checkGeometry() - Method in interface nxopen.cam.SurfaceContourBuilder
Returns the check geometry builder
License requirements: None.
checkGeometryToggle() - Method in interface nxopen.tooling.MWDefineSheetsBuilder
Returns the check geometry toggle for the final sewn sheet
License requirements: None.
checkGeomType - Variable in class nxopen.uf.UFCam.Preferences
checkHuman(Human, boolean, boolean, boolean, boolean) - Method in interface nxopen.features.Human
Check whether human is correct compared with user defined base human
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
checkin - Variable in class nxopen.uf.UFClone.CheckinData
checkinComponents(Component[], ComponentAssembly.CheckinCheckoutOption) - Method in interface nxopen.assemblies.ComponentAssembly
CheckinData() - Constructor for class nxopen.uf.UFClone.CheckinData
CheckinData(boolean, boolean) - Constructor for class nxopen.uf.UFClone.CheckinData
checkingElementGroup() - Method in interface nxopen.cae.optimization.TBSTopologyRestrictAreaBuilder
Returns the elements to react on the restrictions
License requirements: None.
checkingG2Continuity() - Method in interface nxopen.mechatronics.CamProfileBuilder
Returns the indicator that a cam profile should check G2 continuous or not
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
checkingGroup() - Method in interface nxopen.cae.optimization.TBSCastCondition
Returns the element group that is used for checking collision of the removed elements
License requirements: None.
checkingType() - Method in interface nxopen.cae.optimization.TBSTopologyRestrictAreaBuilder
Returns the checking type
License requirements: None.
CheckinInput() - Constructor for class nxopen.pdm.PdmPart.CheckinInput
CheckinInput(boolean, boolean, boolean) - Constructor for class nxopen.pdm.PdmPart.CheckinInput
Constructor for the CheckinInput object.
checkinParts(BasePart[], PdmPart.CheckinInput) - Method in interface nxopen.pdm.PdmPart
Given an array of parts, check in the parts.
checkInPositioningGroups(PositioningGroup[]) - Method in interface nxopen.assemblies.PositioningTask
Checks in the specified nxopen.assemblies.PositioningGroup s which must be
associated with this positioning task.
checkInterference() - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
Checks the clearance between the standard parts and the other components in current assembly.
checkInterference(Tag, int, Tag[]) - Method in interface nxopen.uf.UFModeling
checkinWorkset() - Method in interface nxopen.assemblies.ComponentAssembly
Checks in workset.
checkIpwCollisions() - Method in interface nxopen.cam.CutParameters
Returns the value to Check for Ipw Collsions
License requirements: None.
checkLabelConflicts() - Method in interface nxopen.cae.modelcheck.ModelSetupCheckBuilder
Returns the value indicating whether to check labeling conflicts for node, element and coordindate system across component FEMS
and reports the label range in which the conflict occurs
License requirements: None.
checkLimitViolation() - Method in interface nxopen.cam.SimulationOptionsBuilder
Returns the check limit violation
License requirements: None.
checkLinkCondition() - Method in interface nxopen.cae.optimization.TBSShapeRestrictAreaBuilder
Returns a value indicating whether to check link condition
License requirements: None.
checkMaximumGrowValue() - Method in interface nxopen.cae.optimization.TBSShapeRestrictAreaBuilder
Returns a value indicating whether to check maximum grow value
License requirements: None.
checkMaximumShrinkValue() - Method in interface nxopen.cae.optimization.TBSShapeRestrictAreaBuilder
Returns a value indicating whether to check maximum shrink value
License requirements: None.
checkMemberStatus(Tag, int) - Method in interface nxopen.uf.UFFam
checkMinBendRadius(Tag, String, UFRoute.DesignRuleData) - Method in interface nxopen.uf.UFRoute
checkMinStrLength(Tag, String, UFRoute.DesignRuleData) - Method in interface nxopen.uf.UFRoute
checkModelComprehensive(boolean, String) - Method in interface nxopen.uf.UFSf
checkModelConsistency(String) - Method in interface nxopen.cae.ModelCheckManager
Checks model consistency for all
CAEBody in a
FemPart , to find
out the CAE bodies which is inconsistent to the master bodies, output the body list to log file or listing window
if there is no log file name specified.
Checks the motor license
License requirements: mechanisms ("MECHANISMS")
.
checkName() - Method in interface nxopen.validate.RequirementCheck
Returns the name of requirement check shown in Requirements Validation dialog
License requirements: None.
checkNeck() - Method in interface nxopen.cam.CutDepthChecker
Returns the indicator to include tool neck in the collision check process
License requirements: None.
checkNewerRevisionsOfTemplatePart() - Method in interface nxopen.preferences.SessionAssemblies
Returns the check for newer revisions of template part option
License requirements: None.
checkNodesForContinuity(FENode[], FENode[]) - Method in interface nxopen.cae.ManualMorphBuilder
Checks continuity of nodes for uniform distribution along selected edges
License requirements: nx_masterfem ("Finite Element Modeling")
.
checkNodeToEdgeMapForPlanarAnalysis(TaggedObject[], FENode[]) - Method in interface nxopen.cae.ManualMorphBuilder
Checks out of plane displacement of nodes for Node to Edge Mapping
License requirements: nx_masterfem ("Finite Element Modeling")
.
checkNodeToFaceMapForPlanarAnalysis(TaggedObject, FENode[]) - Method in interface nxopen.cae.ManualMorphBuilder
Checks out of plane displacement of nodes for Node to Face Mapping
License requirements: nx_masterfem ("Finite Element Modeling")
.
checkNodeToPointMapForPlanarAnalysis(TaggedObject, TaggedObject) - Method in interface nxopen.cae.ManualMorphBuilder
Checks out of plane displacement of nodes for Node to Point Mapping
License requirements: nx_masterfem ("Finite Element Modeling")
.
checkNonManifoldEdges() - Method in interface nxopen.cae.modelcheck.ElementEdgeCheckBuilder
Returns the value indicating whether to check non-manifold edges or not
License requirements: None.
checkObsoleteStatus() - Method in interface nxopen.cae.responsesimulation.Solution
Checks status and updates solution properties for the solution which became obsolete because
referenced modal shape file was changed.
checkOffsetBuilder() - Method in interface nxopen.cam.FeatureGeomBuilder
Returns the check offset (inheritable double)
License requirements: cam_base ("CAM BASE")
.
checkout() - Method in interface nxopen.pdm.PdmPart
Checkout the part
License requirements: None.
checkout - Variable in class nxopen.uf.UFClone.CheckoutData
checkoutAllModifiedObjects() - Method in interface nxopen.assemblies.ComponentAssembly
Checks out all modified objects in the current session. checkedOutObjects collection will be type of
BasePart or
DesignElementRevision
License requirements: assemblies ("ASSEMBLIES MODULE")
Created in NX8.5.0
Constructor for the CheckoutInput object.
checkoutParts(BasePart[], PdmPart.CheckoutInput) - Method in interface nxopen.pdm.PdmPart
Given an array of parts, check out the parts.
checkOutPositioningGroups(PositioningGroup[]) - Method in interface nxopen.assemblies.PositioningTask
Checks out the specified nxopen.assemblies.PositioningGroup s which must be
associated with this positioning task.
checkoutWorkset() - Method in interface nxopen.assemblies.ComponentAssembly
Checks out workset.
checkOverlappingToggle() - Method in interface nxopen.tooling.MWDefineSheetsBuilder
Returns the check overlapping toggle for the final sewn sheet
License requirements: None.
checkPartGeometryBeyondTrim() - Method in interface nxopen.cam.TrimPoint
Returns the trim point check part geometry beyond trim
License requirements: None.
checkPartWritable(String) - Method in interface nxopen.uf.UFPart
checkPointSpacing() - Method in interface nxopen.tooling.DieEngTrimAngleCheckBuilder
Returns the maximum distance between two check points
License requirements: None.
checkSafeClearance() - Method in interface nxopen.cam.CutParameters
Returns the Check Safe Clearance
License requirements: None.
checkScallopSize() - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder
Checks the scallop size by enabling the predefined requirement check inside the standard part,
and resets to original state afterwards.
checkSelection() - Method in interface nxopen.cam.Preferences
checkSpreadsheetInput(StandardPartItemBuilder) - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
Looks for the parameter values that are owned by reference geometeries(Attributes) and/or
template parts(attributes or expressions) and used as inputs to look for the parameter values
in spreadsheet.
CheckSpreadsheetInputData() - Constructor for class nxopen.features.shipdesign.StandardPartFrameworkBuilder.CheckSpreadsheetInputData
checkStatus() - Method in interface nxopen.tooling.PocketBuilder
Checks the pocket status of standard parts
License requirements: None.
checkStatus() - Method in interface nxopen.tooling.SpecifyCircuitBuilder
Check whether cooling circuit is finished or not.
checkStock() - Method in interface nxopen.cam.GeometrySet
Returns the check stock
License requirements: None.
checkStock() - Method in interface nxopen.cam.MillCutParameters
Returns the check stock
License requirements: None.
checkSuppressParting() - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
Check if suppressing parting is needed.
checkSurfaces() - Method in interface nxopen.features.GuidedExtensionBuilderEx
Returns the option for checking the resulting guided extension surfaces for geometry issues
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
checkSurfaces() - Method in interface nxopen.tooling.GuidedExtensionBuilder
Returns the option for checking the resulting guided extension surfaces for geometry issues
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING")
.
checkToolAboveBall() - Method in interface nxopen.cam.SurfaceContourBuilder
Returns a bool to check tool above ball
License requirements: None.
checkToolHolder() - Method in interface nxopen.cam.SimulationOptionsBuilder
Returns the check for tool holder collision
License requirements: None.
checkToolLength() - Method in interface nxopen.cam.HoleMakingBuilder
Returns the check tool length flag
License requirements: None.
checkType() - Method in interface nxopen.tooling.ValidCheckBuilder
Returns the check type
License requirements: None.
checkUnconnectedComponent() - Method in interface nxopen.cae.modelcheck.ModelSetupCheckBuilder
Returns the option specifying whether to check for component FEMs that are not connected
License requirements: None.
childChanged - Variable in class nxopen.uf.UFAssem.InstanceStatus
childHic1000Angle() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
Returns the angle to translate the child HIC (Head Injury Criterion) 1000 impact sheet and grid.
childHic1000Offset() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
childHic1000OutputColor() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
Returns the color that will be used for the child HIC (Head Injury Criterion) 1000 impact sheet.
childHic1000OutputFont() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
Returns the font that will be used for the child HIC (Head Injury Criterion) 1000 impact sheet.
childHic1000OutputLayer() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
Returns the layer that will be used for the child HIC (Head Injury Criterion) 1000 impact sheet.
childHic1000OutputWidth() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
Returns the line width that will be used for the child HIC (Head Injury Criterion) 1000 impact sheet.
childHic1700Angle() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
Returns the angle to translate the child HIC (Head Injury Criterion) 1700 impact sheet and grid.
childHic1700Offset() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
childHic1700OutputColor() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
Returns the color that will be used for the child HIC (Head Injury Criterion) 1700 impact sheet.
childHic1700OutputFont() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
Returns the font that will be used for the child HIC (Head Injury Criterion) 1700 impact sheet.
childHic1700OutputLayer() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
Returns the layer that will be used for the child HIC (Head Injury Criterion) 1700 impact sheet.
childHic1700OutputWidth() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
Returns the line width that will be used for the child HIC (Head Injury Criterion) 1700 impact sheet.
childidentifiers - Variable in class nxopen.routing.ReuseLibrary.PartLibraryGetChildNodesData
The child node identifiers.
children - Variable in class nxopen.uf.UFProcessAid.AskChildrenFeaturesData
children - Variable in class nxopen.uf.UFSmd.AskFpChildrenData
children - Variable in class nxopen.uf.UFSo.AskChildrenData
childrenArray - Variable in class nxopen.uf.UFModeling.AskFeatRelativesData
childrenGeomAssociation() - Method in interface nxopen.cae.ManualNodeAssociationBuilder
Returns the flag which decides whether node association to child geometry should be done automatically or not
License requirements: None.
childrenRows - Variable in class nxopen.uf.UFPlist.AskAttachedRowsData
CHINA_GB150842006 - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.DriverSideStandardsType
CHINA_GB150842006 - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.InsideStandardsType
CHINA_M1N1ONLY_GB150842006 - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.PassengerSideStandardsType
Represents China (M1/N1 only) : GB 15084 - 2006 standard
CHINA_NOT_M1N1GB150842006 - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.PassengerSideStandardsType
Represents China (Not M1/N1) : GB 15084 - 2006 standard
CHINESE - Static variable in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.StandardType
Chinese standard
CHINESE_BIG5 - Static variable in class nxopen.features.TextBuilder.ScriptOptions
Specifies the "traditional" Chinese character set
ChipControl - Interface in nxopen.cam
chipControl() - Method in interface nxopen.cam.TurnCutParameters
Returns the chip control
License requirements: None.
ChipControl.Types - Class in nxopen.cam
the control mode options .
CHIPPING - Static variable in class nxopen.annotations.FinishMethod
Specifies chipping finish
CHIPPING - Static variable in class nxopen.annotations.LineWeldDataBuilder.FinishSymbolType
chipRemovalIncrementType() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
Returns the chip removal increment type
License requirements: None.
chkEntirePartStds() - Method in interface nxopen.uf.UFSmd
chkFeatureStds(Tag[], int) - Method in interface nxopen.uf.UFSmd
ChkStdResults() - Constructor for class nxopen.uf.UFSmd.ChkStdResults
ChkStdResults(int, String[]) - Constructor for class nxopen.uf.UFSmd.ChkStdResults
chkStds - Variable in class nxopen.uf.UFSmd.GenPrefs
choice() - Method in interface nxopen.cae.SuppressHoleBuilder
Returns the type Automatic or Manual
License requirements: None.
choice() - Method in interface nxopen.geometricutilities.BlendStopshortBuilder
Returns the Stopshort option choice.
CHOICE - Static variable in class nxopen.issue.IssueProperty.Type
Choice type
ChooseExpression - Interface in nxopen.blockstyler
Represents Choose Expression block .
CHORD_LENGTH - Static variable in class nxopen.features.AestheticFaceBlendBuilder.BlendType
Chord Length will keep the appearance of a constant width blend through areas which have changing angles between the input walls.
CHORD_RECTANGULAR - Static variable in class nxopen.die.PierceItemBuilder.HoleShapeType
Chord Rectangular hole
CHORD_RECTANGULAR - Static variable in class nxopen.tooling.DieDesPierceInsertBuilder.HoleShapeTypes
CHORDAL - Static variable in class nxopen.features.AOCSBuilder.OffsetType
offset_type_chordal
chordal() - Method in interface nxopen.ListCreator
Returns the m_chordal * - Specifies the chordal tolerance for Defined Level of Detail
License requirements: None.
CHORDAL_DEVIATION - Static variable in class nxopen.facet.DecimateFacetBodyBuilder.DecimateMethodType
Chordal deviation reduces the number of facets by removing facets which do not effect the overall accuracy of the mesh.
CHORDAL_TOLERANCE - Static variable in class nxopen.features.PointSetBuilder.CurvePointsType
Points will be created based on the chordal deviation of curve.
CHORDAL_TOLERANCE - Static variable in class nxopen.routing.SegmentManager.SubdivideSpacing
Chordal Tolerance
CHORDAL_TOLERANCE_SPACING - Static variable in class nxopen.features.SectionCurveBuilder.SpacingType
Chordal tolerance spacing
chordalOption() - Method in interface nxopen.JtCreator
Returns the chordal option - Specifies wheather the chordal value should be RELATIVE or ABSOLUTE
License requirements: None.
chordalTolerance() - Method in interface nxopen.cae.MeshControlBuilder
Returns the value stored in chordal tolerance field.
chordalTolerance() - Method in interface nxopen.cam.SimulationOptionsBuilder
Returns the chordal tolerance
License requirements: None.
chordalTolerance() - Method in interface nxopen.features.PointSetBuilder
Returns the chordal tolerance used in creating points.
chordalTolerance() - Method in interface nxopen.features.SectionCurveBuilder
Returns the chordal tolerance
License requirements: None.
chordalTolerance() - Method in interface nxopen.features.sheetmetal.MetaformBuilder
Returns the chordal tolerance
License requirements: None.
chordalTolerance() - Method in interface nxopen.features.shipdesign.PlateChamferBuilder
Returns the chordal tolerance
License requirements: None.
chordalTolerance - Variable in class nxopen.routing.SegmentManager.SubdivideOption
Chordal Tolerance
chordalTolerance() - Method in interface nxopen.weld.ExportWeldJointBuilder
Returns the minimum chordal length used to create a discrete version of the weld path, points along it will be output into
xml file to represent the weld path
License requirements: None.
chordHeight() - Method in interface nxopen.facet.MergeFacetBodyBuilder
Returns the chord height to control the size of new facets
License requirements: None.
chordLength() - Method in interface nxopen.features.AestheticFaceBlendBuilder
chordLengthLaw() - Method in interface nxopen.features.AestheticFaceBlendBuilder
Returns the chord length law variable
License requirements: None.
chordTol - Variable in class nxopen.uf.UFCurve.SectionPerpcrvData
chordTol - Variable in class nxopen.uf.UFSmd.FpPrefs
CHROME - Static variable in class nxopen.display.TrueStudioBuilder.GlobalMaterial
Overrides the object color with a chrome material display.
CHRONOLOGICAL_COMPONENT - Static variable in class nxopen.assemblies.Order.Type
System defined chronological component order
chuckType() - Method in interface nxopen.tooling.ElectrodeComponentBuilder
Returns the electrode chuck type.
CIR_PERP_PARALLEL_TO_TAXIS - Static variable in class nxopen.cam.ArcOutputTypeCiBuilder.OutputTypes
cir perp parallel to taxis
CIR_PERP_TO_TAXIS - Static variable in class nxopen.cam.ArcOutputTypeCiBuilder.OutputTypes
cir perp to taxis
CIR_PERP_TO_TAXIS - Static variable in class nxopen.cam.WedmArcOutputTypeCiBuilder.OutputTypes
cir perp to taxis
cirCavityNumber() - Method in interface nxopen.tooling.LayoutBuilder
Returns the copy number for circular transform
License requirements: None.
circDeleteAllComponents() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
Returns the option to delete all components in circular array.
CIRCLE - Static variable in class nxopen.annotations.IdSymbolBuilder.SymbolTypes
Circle
CIRCLE - Static variable in class nxopen.annotations.PartsListBuilder.PartsListSymbolType
CIRCLE - Static variable in class nxopen.cae.MarkerType0d
CIRCLE - Static variable in class nxopen.cae.ModelDisplayBuilder.FreeEdgeMarker
Circle marker
CIRCLE - Static variable in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeMarker
Circle marker
CIRCLE - Static variable in class nxopen.cae.xyplot.PointMarker
Circle marker
CIRCLE - Static variable in class nxopen.cam.CamInspectionOperationFeaturetypes
Circle
CIRCLE - Static variable in class nxopen.cam.InspectionMethodBuilder.MethodTypes
Circle
CIRCLE - Static variable in class nxopen.drawings.DetailViewBuilder.LabelOnParentType
Circular
CIRCLE - Static variable in class nxopen.drawings.DrawingCompareSettingsBuilder.ChangeSymbolType
CIRCLE - Static variable in class nxopen.drawings.ViewDetailLabelBuilder.LabelParentDisplayTypes
CIRCLE - Static variable in class nxopen.features.SectionSurfaceBuilder.Types
Deprecated.
circle
CIRCLE - Static variable in class nxopen.fields.DisplayPropertiesBuilder.IndepDomDispType
CIRCLE - Static variable in class nxopen.fields.DisplayPropertiesBuilder.ValuesEnum
Circle - Interface in nxopen.markup
Represents a nxopen.Markup.Circle
To create a new instance of this class, use nxopen.Markup.MarkupFileObjectCollection#createCircle
Created in NX10.0.0
NX_REMOVE_FROM_JAVA_API
CIRCLE - Static variable in class nxopen.mechatronics.TransportSurfaceBuilder.MoveType
Circle
CIRCLE - Static variable in class nxopen.positioning.ConstraintReference.GeometryType
Circle
CIRCLE - Static variable in class nxopen.preferences.SubdivisionModelingPreferences.VertexStyleTypes
CIRCLE - Static variable in class nxopen.tooling.PiercingInsertBuilder.NormalBbpslugType
Bottom plate slug type is circle
CIRCLE - Static variable in class nxopen.tooling.PiercingInsertBuilder.NormalDsslugType
Die shoe slug type is circle
CIRCLE - Static variable in class nxopen.tooling.PiercingInsertBuilder.PunchPocketTypeItemsBP
Punch pocket type in backing plate is circle
CIRCLE - Static variable in class nxopen.tooling.PiercingInsertBuilder.PunchPocketTypeItemsPP
Punch pocket type in punch plate is circle
CIRCLE - Static variable in class nxopen.tooling.PiercingInsertBuilder.PunchPocketTypeItemsSP
Punch pocket type in stripper plate is circle
CIRCLE - Static variable in class nxopen.uf.UFDisp.PolyMarker
CIRCLE - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
Circle.CenterAndRadiusData - Class in nxopen.markup
CIRCLE_IN_CIRCLE - Static variable in class nxopen.cae.MarkerType0d
CIRCLE_IN_CIRCLE - Static variable in class nxopen.uf.UFDisp.PolyMarker
CIRCLE_IN_CIRCLE - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
CIRCLE_IN_SQUARE - Static variable in class nxopen.cae.MarkerType0d
CIRCLE_IN_SQUARE - Static variable in class nxopen.uf.UFDisp.PolyMarker
CIRCLE_IN_SQUARE - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
CIRCLE_SECTION - Static variable in class nxopen.features.vehicledesign.WheelCoveringBuilder.SurfaceSectionType
The checking surface is created as circle section type
CIRCLE_SEGMENT - Static variable in class nxopen.features.vehicledesign.WheelFixingBuilder.ShapeType
CIRCLE_TANGENT - Static variable in class nxopen.features.SectionSurfaceBuilder.Types
Deprecated.
circle tangent
circleCenter() - Method in interface nxopen.tooling.WireHoleBuilder
Returns the circle center to create wire hole
License requirements: None.
CircleCenterline - Interface in nxopen.annotations
Represents a CircleCenterline centerline
This is an abstract class.
CircleCenterlineBuilder - Interface in nxopen.annotations
Represents a CircleCenterline Builder
This is an abstract class.
CircleCenterlineBuilder.Types - Class in nxopen.annotations
the valid enumeration used for the creation types, applicable only while creation
Once created type centerpoint will be set for all bolt circle/circular centerline
CircleCenterlineSettingsBuilder - Interface in nxopen.annotations
Represents a Builder for Circle Centerline Settings .
CIRCLESIN_SKETCH - Static variable in class nxopen.tooling.FaceColorManagementBuilder.HoleTypeEnumValue
circleU() - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
Returns the circle utoggle
License requirements: None.
circleUType() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
Returns the circle uenum
License requirements: None.
circleUvalue() - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
Returns the circle u value
Only available when
Annotations.FeatureControlFrameDataBuilder#circleU
is true.
circleUValue() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
Returns the circle uvalue
License requirements: None.
circleUValueType() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
Returns the circle uvalue enum
License requirements: None.
circuitColor() - Method in interface nxopen.tooling.SpecifyCircuitBuilder
Returns the circuit channel temperary body color.
CIRCULAR - Static variable in class nxopen.annotations.DatumTargetBuilder.Types
circular
CIRCULAR - Static variable in class nxopen.annotations.FeatureControlFrameDataBuilder.AreaSymbolType
Circular
CIRCULAR - Static variable in class nxopen.annotations.GeometricCharacteristic
Specifies cirular characteristics
CIRCULAR - Static variable in class nxopen.annotations.SearchCriteriaDatumTargetBuilder.DatumTargetTypes
circular type
CIRCULAR - Static variable in class nxopen.cam.CylinderMillingBuilder.CutPatternTypes
Circular
CIRCULAR - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamTolZoneShape
Circular
CIRCULAR - Static variable in class nxopen.cam.NcmHoleMachiningEngRet.EngRetTypes
Circular
CIRCULAR - Static variable in class nxopen.cam.NcmWedmBuilder.LeadInMethodTypes
circular lead in
CIRCULAR - Static variable in class nxopen.cam.NcmWedmBuilder.LeadOutMethodTypes
circular lead out
CIRCULAR - Static variable in class nxopen.cam.TurningOperationBuilder.MotionOutputOptions
Linear and circular motions output
CIRCULAR - Static variable in class nxopen.die.KeywayBuilder.Types
tool runoff is created using a plunge cut at the end of the slot
CIRCULAR - Static variable in class nxopen.die.KeywayChildBuilder.RunoffTypeOption
Circular runoff.
CIRCULAR - Static variable in class nxopen.die.KeywayParentBuilder.RunoffTypeOption
Circular runoff.
CIRCULAR - Static variable in class nxopen.die.PadChildBuilder.ShapeTypeOption
Circular pad.
CIRCULAR - Static variable in class nxopen.die.PadParentBuilder.ShapeTypeOption
Circular pad.
CIRCULAR - Static variable in class nxopen.die.PierceHoleChildBuilder.ShapeTypeOption
circular hole
CIRCULAR - Static variable in class nxopen.die.PierceItemBuilder.HoleShapeType
Circular shaped hole
CIRCULAR - Static variable in class nxopen.drawings.DetailViewBuilder.Types
Circular boundary
circular() - Method in interface nxopen.drawings.ViewStyleDetailBuilder
Returns the circular toggle on the DETAIL tab of the View Style Dialog
License requirements: None.
CIRCULAR - Static variable in class nxopen.Edge.EdgeType
Circular edge
CIRCULAR - Static variable in class nxopen.facet.FacetedEdge.FacetededgeType
Circular edge
CIRCULAR - Static variable in class nxopen.features.AestheticFaceBlendBuilder.ShapeType
Circular option will always generate a constant radius arc shape.
CIRCULAR - Static variable in class nxopen.features.EdgeBlendBuilder.Section
Default option, circular shaped blends
CIRCULAR - Static variable in class nxopen.features.ExtensionBuilder.Extension
Circular extension
CIRCULAR - Static variable in class nxopen.features.FaceBlendBuilder.CrossSectionOption
CIRCULAR - Static variable in class nxopen.features.PatternFaceBuilder.PatternTypes
This stands for circular pattern type.
CIRCULAR - Static variable in class nxopen.features.SectionSurfaceBuilderEx.Types
Circular type
CIRCULAR - Static variable in class nxopen.features.sheetmetal.BeadBuilder.CrossSectionTypeOptions
CIRCULAR - Static variable in class nxopen.features.shipdesign.PenetrationRequest.CoutoutType
CIRCULAR - Static variable in class nxopen.features.TrimCurveBuilder.CurveExtensionTypes
Circular
CIRCULAR - Static variable in class nxopen.features.vehicledesign.InnerAngleBuilder.CalculationMethodType
CIRCULAR - Static variable in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder.Types
Circular
CIRCULAR - Static variable in class nxopen.geometricutilities.PatternDefinition.PatternEnum
pattern in angular and radial directions.
CIRCULAR - Static variable in class nxopen.preferences.DetailBoundaryOption
Circular boundary
CIRCULAR - Static variable in class nxopen.routing.DuctSizeCalculatorBuilder.DuctShapeType
CIRCULAR - Static variable in class nxopen.routing.electrical.ElectricalStockDefinition.SectionType
CIRCULAR - Static variable in class nxopen.SketchPattern.Type
The pattern type is circular pattern
CIRCULAR - Static variable in class nxopen.tooling.BomBuilder.Shape
The circular type.
CIRCULAR - Static variable in class nxopen.tooling.BurringInsertBuilder.CircularOrNonCircularType
CIRCULAR - Static variable in class nxopen.tooling.DieDesPierceInsertBuilder.HoleShapeTypes
CIRCULAR - Static variable in class nxopen.tooling.LayoutBuilder.LayoutType
Circle layout
CIRCULAR - Static variable in class nxopen.tooling.RunnerBuilder.SectionType
Use circular section type.
CIRCULAR_ARC - Static variable in class nxopen.features.vehicledesign.GroundClearanceBuilder.SectionCurveType
CIRCULAR_ARRAY - Static variable in class nxopen.cam.InspectionOperationTransformBuilder.Transform
circular array
CIRCULAR_ARRAY - Static variable in class nxopen.cam.OperationTransformBuilder.Transform
circular array
CIRCULAR_CUTOUT - Static variable in class nxopen.features.sheetmetal.ClosedCornerBuilder.TreatmentTypeOptions
Circular shaped relief
CIRCULAR_CUTOUT - Static variable in class nxopen.features.sheetmetal.EditCornerBuilder.CornerReliefTypeOptions
CIRCULAR_CUTOUT - Static variable in class nxopen.features.sheetmetal.MiterOptions.ClosedCornerTypeOptions
corner has a circular cutout in it
CIRCULAR_CUTOUT - Static variable in class nxopen.features.sheetmetal.ThreeBendCornerBuilder.TreatmentTypeOptions
CIRCULAR_DRAWING - Static variable in class nxopen.tooling.ForceCalculationBuilder.ProcessTypes
circular drawing
CIRCULAR_PATTERN - Static variable in class nxopen.positioning.Constraint.Type
For internal use only
CIRCULAR_REGION - Static variable in class nxopen.annotations.RegionBuilder.Types
circular
CIRCULAR_REGION - Static variable in class nxopen.uf.UFGdt.GeometricDefinitionType
CIRCULAR_RUNOUT - Static variable in class nxopen.annotations.FeatureControlFrameBuilder.FcfCharacteristic
circular runout
CIRCULAR_RUNOUT - Static variable in class nxopen.annotations.GeometricCharacteristic
Specifies cirular runout characteristics
CIRCULAR_RUNOUT - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.CharacteristicOptions
circular runout
CIRCULAR_RUNOUT - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.TolType
Circular Runout
CIRCULAR_RUNOUT_TYPE - Static variable in class nxopen.uf.UFGdt.Characteristic
CIRCULAR_SCAN - Static variable in class nxopen.cam.InspectionMethodBuilder.OperationTypes
Scan Arc
CIRCULAR_SHAPED - Static variable in class nxopen.uf.UFModl.BeadShape
CIRCULAR_SPACE_WIDTH_FEATURE - Static variable in class nxopen.uf.UFGdt.FeatureType
CIRCULAR_TOOTH_THICKNESS_FEATURE - Static variable in class nxopen.uf.UFGdt.FeatureType
CIRCULAR_TYPE - Static variable in class nxopen.tooling.ScrapDesignBuilder.OvercutType
Creates circular type of overcut
CIRCULAR_TYPE - Static variable in class nxopen.uf.UFGdt.Characteristic
CircularAboutAxisMoveBuilder - Interface in nxopen.cam
CircularAboutAxisMoveBuilder.AxisType - Class in nxopen.cam
the axis type
CircularAboutAxisMoveBuilder.EndType - Class in nxopen.cam
the motion end type
CircularAboutAxisMoveBuilder.ExtensionType - Class in nxopen.cam
the extension type
circularAreaMomentOfInertia(double) - Method in interface nxopen.EngineeringFunction
Calculate the area moment of inertia of circular cross section.
CircularBlendCurve - Interface in nxopen.features
Represents a Circular Blend Curve feature
To create or edit an instance of this class, use
CircularBlendCurveBuilder
Created in NX5.0.0
Represents the cylinder direction options
CircularBlendCurveBuilder.CylinderRadiusOption - Class in nxopen.features
Represents the cylinder radius options
CircularCenterline - Interface in nxopen.annotations
Represents a CircularCenterline centerline
To create or edit an instance of this class, use
CircularCenterlineBuilder
Created in NX6.0.0
Returns the count of circular pattern, don't use it until nx502
License requirements: None.
circularCrossSection() - Method in interface nxopen.features.FaceBlendBuilder
Returns the face blend circular section
License requirements: None.
CircularCrossSection - Interface in nxopen.geometricutilities
Represents a circular section data for face blend.
circularDefinition() - Method in interface nxopen.geometricutilities.PatternDefinition
Returns the circular definition.
CircularEdgeMethod - Interface in nxopen.cae
Represents the output from the circular edge smart selector method
To obtain an instance of this class use CAE::SmartSelectionManager
.
circularEdgesFixedCenterLoadDeflection(double, double, double, double) - Method in interface nxopen.EngineeringFunction
Calculate the maximum deflection of a circular flat plate with the edge fixed
around circumference under a concentrated load at the center.
circularEdgesFixedCenterLoadStress(double, double, double) - Method in interface nxopen.EngineeringFunction
Calculate the maximum tensile stress of a circular flat plate with the edge fixed
around circumference under a concentrated load at the center.
circularEdgesFixedUniformLoadDeflection(double, double, double, double) - Method in interface nxopen.EngineeringFunction
Calculate the maximum deflection of a circular flat plate with the edge fixed around
circumference under a uniformly distributed load over the surface of the plate.
circularEdgesFixedUniformLoadStress(double, double, double) - Method in interface nxopen.EngineeringFunction
Calculate the maximum tensile stress of a circular flat plate with the edge fixed
around circumference under a uniformly distributed load over the surface of the plate.
circularEdgesSupportedCenterLoadDeflection(double, double, double, double) - Method in interface nxopen.EngineeringFunction
Calculate the maximum deflection of a circular flat plate with the edge supported
around the circumference under a concentrated load at the center.
circularEdgesSupportedCenterLoadStress(double, double, double) - Method in interface nxopen.EngineeringFunction
Calculate the maximum tensile stress of a circular flat plate with the edge
supported around the circumference under a concentrated load at the center.
circularEdgesSupportedUniformLoadDeflection(double, double, double, double) - Method in interface nxopen.EngineeringFunction
Calculate the maximum deflection of a circular flat plate with the edge supported
around the circumference under a uniformly distributed load over the surface of the plate.
circularEdgesSupportedUniformLoadStress(double, double, double) - Method in interface nxopen.EngineeringFunction
Calculate the maximum tensile stress of a circular flat plate with the edge supported
around the circumference under a uniformly distributed load over the surface of the plate.
circularFrame() - Method in interface nxopen.geometricanalysis.sectionanalysis.CircularGridBuilder
Returns the circular frame
License requirements: studio_analyze ("STUDIO ANALYZE")
.
CircularFrameBuilder - Interface in nxopen.geometricutilities
CircularFrameBuilder.Subtypes - Class in nxopen.geometricutilities
Represents the circular frame subtypes
circularGrid() - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder
Returns the circular grid.
CircularGridBuilder - Interface in nxopen.geometricanalysis.sectionanalysis
CircularImprintBuilder - Interface in nxopen.cae
CircularImprintBuilder.AroundEdgeDiaType - Class in nxopen.cae
Around Edge Diameter Option
circularInsert() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
Returns the insert to do circular array.
CIRCULARITY - Static variable in class nxopen.annotations.FeatureControlFrameBuilder.FcfCharacteristic
circularity
CIRCULARITY - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.CharacteristicOptions
circularity
CIRCULARITY - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.TolType
Circularity
CircularMotion() - Constructor for class nxopen.uf.UFPath.CircularMotion
CircularMotion(double[], double[], double[], double[], double[], double[], double, double, double, UFPath.FeedUnit, UFPath.MotionType, UFPath.Side, UFPath.Shape) - Constructor for class nxopen.uf.UFPath.CircularMotion
circularMotionCentripetalAcceleration(double, double) - Method in interface nxopen.EngineeringFunction
Calculate the centripetal acceleration from velocity and radius or distance.
circularOperation() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
Returns the circular array operation.
circularOrientationOption() - Method in interface nxopen.geometricutilities.PatternOrientation
Returns the orientationOption for Circular pattern type
License requirements: None.
circularOrNonCircular() - Method in interface nxopen.tooling.BurringInsertBuilder
Returns the circular or non circular type.
CircularPattern - Interface in nxopen.geometricutilities
the circular pattern definition.
CircularPattern.StaggerOptions - Class in nxopen.geometricutilities
defines any stagger to be defined on the pattern.
circularScan() - Method in interface nxopen.cam.InspectionMethodBuilder
Returns a flag to indicate if scan arc is allowed
License requirements: None.
circularSlugHole() - Method in interface nxopen.die.PierceHoleChildBuilder
Returns the circular slug hole switch of the pierce hole
License requirements: ug_die_design ("Die Design")
.
circularSlugHole() - Method in interface nxopen.die.PierceHoleParentBuilder
Returns the circular slug hole switch of pierce holes
License requirements: ug_die_design ("Die Design")
.
CircularTarget - Interface in nxopen.annotations
Represents a circular datum target
To create or edit an instance of this class, use
PmiDatumTargetBuilder
Created in NX4.0.0
Represents circular datum target data .
circularTypeMode() - Method in interface nxopen.features.SectionSurfaceBuilderEx
Returns the circular type mode.
circularVector() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
Returns the specified vector for defining circular array axis.
CIRCUMCIRCLE - Static variable in class nxopen.tooling.BomBuilder.Circle
Circumcircle.
CIRCUMSCRIBED - Static variable in class nxopen.geometricutilities.PolygonPattern.SizeOptions
use circumscribed circle to define a polygon
CIRCUMSCRIBED_RADIUS - Static variable in class nxopen.SketchPolygonBuilder.SizeType
circumscribed radius
cirRadius() - Method in interface nxopen.tooling.LayoutBuilder
Returns the radius value
License requirements: None.
cirRotateAngle() - Method in interface nxopen.tooling.LayoutBuilder
Returns the rotate angle
License requirements: None.
cirStartAngle() - Method in interface nxopen.tooling.LayoutBuilder
Returns the start angle
License requirements: None.
CLAMP_AXIS_OFF - Static variable in class nxopen.uf.UFPath.ClampStatus
CLAMP_AXIS_ON - Static variable in class nxopen.uf.UFPath.ClampStatus
CLAMP_OFF - Static variable in class nxopen.uf.UFPath.ClampStatus
CLAMP_ON - Static variable in class nxopen.uf.UFPath.ClampStatus
CLAMP_STATUS_LAST_ELEMENT - Static variable in class nxopen.uf.UFPath.ClampStatus
ClampingSlot - Interface in nxopen.die
Represents a clamping slot feature
To create or edit an instance of this class, use
ClampingSlotBuilder
Created in NX6.0.0
Clamping slot types
CLASS - Static variable in class nxopen.cam.CollisionPairBuilder.Filter
class filter
CLASS_A - Static variable in class nxopen.features.vehicledesign.ManikinBuilder.ClassificationType
Class A Classification Type.
CLASS_A - Static variable in class nxopen.HumanPosturePredictionBuilder.VehicleType
Indicate Class A vehicle.
CLASS_B - Static variable in class nxopen.features.vehicledesign.ManikinBuilder.ClassificationType
Class B Classification Type.
CLASS_B - Static variable in class nxopen.HumanPosturePredictionBuilder.VehicleType
Indicate Class B vehicle.
ClassData() - Constructor for class nxopen.uf.UFFam.ClassData
ClassData(int, int, UFFam.AttributeData[], String) - Constructor for class nxopen.uf.UFFam.ClassData
classes - Variable in class nxopen.uf.UFKf.AskAllClassesData
classes - Variable in class nxopen.uf.UFKf.AskClassesData
classification() - Method in interface nxopen.features.vehicledesign.ManikinBuilder
Returns the classification of the vehicle
License requirements: None.
classification() - Method in interface nxopen.sim.KinematicJunctionBuilder
Returns the classification of the junction
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder") OR resource_manager_nx ("Teamcenter Resource Manager")
.
classifiedSetList - Variable in class nxopen.uf.UFFbmGeom.ClassifyByCriteriaData
Classifier - Interface in nxopen.visualreporting
A Classifier within a
Rule .
Represents the possible date grouping method options.
Classifier.GroupingMethodOption - Class in nxopen.visualreporting
Represents the possible grouping method options.
Classifier.RangeMethodOption - Class in nxopen.visualreporting
Represents the possible range method options.
Classifier.TypeOption - Class in nxopen.visualreporting
Represents the possible type options.
classifyByCriteria(Tag, int, String[]) - Method in interface nxopen.uf.UFFbmGeom
ClassifyByCriteriaData() - Constructor for class nxopen.uf.UFFbmGeom.ClassifyByCriteriaData
className() - Method in interface nxopen.features.UserDefinedFeatureClass
Returns the class name
License requirements: None.
className() - Method in interface nxopen.features.UserDefinedFeatureCopyEvent
Returns the class name
License requirements: None.
className() - Method in interface nxopen.features.UserDefinedFeatureCreateEvent
Returns the class name
License requirements: None.
className() - Method in interface nxopen.features.UserDefinedFeatureEditEvent
Returns the class name
License requirements: None.
className() - Method in interface nxopen.features.UserDefinedFeatureIconEvent
Returns the class name
License requirements: None.
className() - Method in interface nxopen.features.UserDefinedFeatureUpdateEvent
Returns the class name
License requirements: None.
className() - Method in interface nxopen.userdefinedobjects.UserDefinedClass
className() - Method in interface nxopen.userdefinedobjects.UserDefinedObject
Returns the class name of this UDO
License requirements: None.
className() - Method in interface nxopen.validate.ResultObject
Returns the class name of check result.
clause() - Method in interface nxopen.NavigatorFilter
CLAY - Static variable in class nxopen.display.TrueStudioBuilder.GlobalMaterial
Overrides the object color with a clay material display.
clcName - Variable in class nxopen.uf.UFSf.AskCombinedLoadCaseData
clcTags - Variable in class nxopen.uf.UFSf.AskCombinedLoadCasesData
CLEAN_BOTH_WALLS - Static variable in class nxopen.cam.RoughTurningBuilder.PartOffDepthModeTypes
Part Off Depth Mode: Clean Both Walls
CLEAN_FIRST_WALL - Static variable in class nxopen.cam.RoughTurningBuilder.PartOffDepthModeTypes
Part Off Depth Mode: Clean First Wall
cleanBody() - Method in interface nxopen.features.OptimizeFaceBuilder
Returns the clean body flag.
cleanMappingData() - Method in interface nxopen.Section
Cleans Mapping Data
This method should be used to clean mapping data after mapping is done
License requirements: gateway ("UG GATEWAY")
.
cleanModelView - Variable in class nxopen.uf.UFDraw.ViewInfo
cleanSelectedFeaList() - Method in interface nxopen.uf.UFMfm
cleanTargetSet(int) - Method in interface nxopen.cae.SetManager
Clears the objects stored in the set specified in
the set manager
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
cleanup() - Method in interface nxopen.cam.RoughTurningBuilder
Returns the Cleanup
License requirements: None.
cleanup(int) - Method in interface nxopen.uf.UFPart
cleanupAssemblyConstraints() - Method in interface nxopen.PartCleanup
Returns the option that specifies whether to cleanup assembly constraints.
cleanupCAMObjects() - Method in interface nxopen.PartCleanup
Returns the option that specifies whether to delete or fix any corrupt
internal CAM objects.
cleanupControl() - Method in interface nxopen.cam.TurnCutParameters
Returns the cleanup control
License requirements: None.
cleanupDraftingObjects() - Method in interface nxopen.PartCleanup
Returns the option that specifies whether to perform drafting cleanup.
CleanupFacetBodyBuilder - Interface in nxopen.facet
CleanupFacetBodyBuilder.CleanupOptions - Class in nxopen.facet
These represent the options for each facet defect
cleanUpFacetedFacesAndEdges() - Method in interface nxopen.Session
cleanupFeatureData() - Method in interface nxopen.PartCleanup
Returns the option that specifies whether to perform solid cleanup.
cleanUpFeaturesCreated() - Method in interface nxopen.geometricutilities.LocalUntrimBuilder
Cleans up the features created by the selecting face call back.
cleanupMatingData() - Method in interface nxopen.PartCleanup
Returns the option that specifies whether to cleanup mating data.
CleanupOutput - Interface in nxopen.cam
cleanupOutput() - Method in interface nxopen.cam.MillCutParameters
Returns the Cleanup Output
License requirements: None.
CleanupOutput.GeomTypes - Class in nxopen.cam
Available types for cleanup outputing geometry type, Cleanup Geometry Output
cleanupPasses() - Method in interface nxopen.cam.CylinderMillingBuilder
Returns the Cleanup Passes
License requirements: None.
cleanupRoutingData() - Method in interface nxopen.PartCleanup
Returns the option which determines if the routing part cleanup option should be performed.
CleanupSettings - Interface in nxopen.cam
cleanupSettings() - Method in interface nxopen.cam.MillCutParameters
Returns the Cleanup Settings
License requirements: None.
cleanUpTemporaryCurves() - Method in interface nxopen.features.shipdesign.PlateSystemBuilder
Cleans up the temp curves.
cleanupType() - Method in interface nxopen.cam.BoundaryTurnMemberFineFinishCorner
Returns the fine_finish_corner cleanup
License requirements: None.
cleanupType() - Method in interface nxopen.cam.SurfaceContourBuilder
Returns the cleanup type
License requirements: None.
CleanUpUtilityBuilder - Interface in nxopen.features.sheetmetal
clear() - Method in interface nxopen.annotations.ArbitraryAreaSeedBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.annotations.ArbitraryAreaSeedBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.annotations.DatumReferenceBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.annotations.DatumReferenceBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.annotations.FeatureControlFrameDataBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.annotations.LeaderDataList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.annotations.LeaderDataList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.annotations.MasterSymbolListItemBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.annotations.MasterSymbolListItemBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.annotations.SelectAnnotationList
Removes all items from the list.
clear() - Method in interface nxopen.annotations.SelectBaseCustomSymbolList
Removes all items from the list.
clear() - Method in interface nxopen.annotations.SelectOrdinateDimensionList
Removes all items from the list.
clear() - Method in interface nxopen.annotations.SelectTableSectionList
Removes all items from the list.
clear() - Method in interface nxopen.annotations.SymbolCatalogParameterBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.annotations.SymbolCatalogParameterBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.annotations.TitleBlockCellBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.annotations.TitleBlockCellBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.assemblies.PartitionList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.assemblies.PartitionList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.assemblies.SelectComponentList
Removes all items from the list.
clear() - Method in interface nxopen.BodyList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.BodyList
Clears the entire list
License requirements: None.
CLEAR - Static variable in class nxopen.cae.BeamEADBuilder.State
clear the property
CLEAR - Static variable in class nxopen.cae.BushingEADBuilder.State
clear the property
clear() - Method in interface nxopen.cae.DependentMeshListItemBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.cae.DependentMeshListItemBuilderList
Clears the entire list
License requirements: None.
CLEAR - Static variable in class nxopen.cae.GapEADBuilder.State
clear the property
clear() - Method in interface nxopen.cae.LaminateSelectEntitiesBuilder
Clears the selection list
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
CLEAR - Static variable in class nxopen.cae.LumpedMassEADBuilder.State
clear the property
clear() - Method in interface nxopen.cae.ManualSweepBetweenListItemSelectionList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.cae.ManualSweepBetweenListItemSelectionList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.cae.MeshManualSweepBetweenListItemSelectionList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.cae.MeshManualSweepBetweenListItemSelectionList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.cae.SelectCAEBodyList
Removes all items from the list.
clear() - Method in interface nxopen.cae.SelectCAEEdgeList
Removes all items from the list.
clear() - Method in interface nxopen.cae.SelectCAEFaceList
Removes all items from the list.
clear() - Method in interface nxopen.cae.SelectFEElemFaceList
Removes all items from the list.
clear() - Method in interface nxopen.cae.SelectFENodeList
Removes all items from the list.
clear() - Method in interface nxopen.cae.SelectMeshList
Removes all items from the list.
CLEAR - Static variable in class nxopen.cae.ShellEADBuilder.State
clear the property
CLEAR - Static variable in class nxopen.cae.SpringEADBuilder.State
clear the property
clear() - Method in interface nxopen.cae.ThicknessBuilder
The clear context
License requirements: nx_masterfem ("Finite Element Modeling")
.
clear() - Method in interface nxopen.cam.BoundaryMemberSetList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.cam.BoundaryMemberSetList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.cam.BoundarySetList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.cam.BoundarySetList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.cam.BoundaryTurnVariableStockSetList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.cam.BoundaryTurnVariableStockSetList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.cam.CAMFeatureList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.cam.CAMFeatureList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.cam.CollisionPairBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.cam.CollisionPairBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.cam.CustomLoopSetList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.cam.CustomLoopSetList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.cam.CutVolumeList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.cam.CutVolumeList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.cam.DriveChainItemBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.cam.DriveChainItemBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.cam.GeometrySetList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.cam.GeometrySetList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.cam.HoldingSystemBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.cam.HoldingSystemBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.cam.HoleBossSetList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.cam.HoleBossSetList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.cam.InPathEventDataBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.cam.InPathEventDataBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.cam.LaserControlPointList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.cam.LaserControlPointList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.cam.ManualFeatureBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.cam.ManualFeatureBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.cam.SelectCAMFeatureList
Removes all items from the list.
clear() - Method in interface nxopen.cam.SplitterList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.cam.SplitterList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.cam.SurfaceDriveGeometrySetList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.cam.SurfaceDriveGeometrySetList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.cam.TabPointDataBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.cam.TabPointDataBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.cam.ThreadedBossSetList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.cam.ThreadedBossSetList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.cam.ThreadedHoleSetList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.cam.ThreadedHoleSetList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.cam.ToolPathSplitItemBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.cam.ToolPathSplitItemBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.cam.UdeList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.cam.UdeList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.cam.WedmCustomBoundaryDataBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.cam.WedmCustomBoundaryDataBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.cam.WireGuideList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.cam.WireGuideList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.DateItemBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.DateItemBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.die.DieAssistantFlangeProfileList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.die.DieAssistantFlangeProfileList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.die.DieAssistantTrimProfileList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.die.DieAssistantTrimProfileList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.die.DieBooleanBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.die.DieBooleanBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.die.DieLimitsBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.die.DieLimitsBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.die.DieLocationBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.die.DieLocationBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.die.DrawBeadSegmentBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.die.DrawBeadSegmentBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.die.PierceItemBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.die.PierceItemBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.drafting.AttributeItemBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.drafting.AttributeItemBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.drafting.PrimaryContentItemBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.drafting.PrimaryContentItemBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.drawings.SectionLineSegmentBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.drawings.SectionLineSegmentBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.drawings.SectionLineSegmentPointListBuilder
clear() - Method in interface nxopen.drawings.SelectDraftingViewList
Removes all items from the list.
clear() - Method in interface nxopen.drawings.SelectDrawingViewList
Removes all items from the list.
clear() - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.drawings.ViewStyleShipbuildingLinesBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.drawings.ViewStyleShipbuildingLinesBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.ErrorList
Clears the list
License requirements: None.
clear() - Method in interface nxopen.ExpressionCollectorSetList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.ExpressionCollectorSetList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.ExpressionSectionSetList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.ExpressionSectionSetList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.facet.SelectFacetedBodyList
Removes all items from the list.
clear() - Method in interface nxopen.features.GeometricConstraintDataManager
Deletes all
GeometricConstraintData objects from the list
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT")
Created in NX5.0.0
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.features.GlobalShapingCurveOffsetBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.features.GlobalShapingPointOffsetBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.features.GlobalShapingPointOffsetBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.features.PartGeometryCopySelectBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.features.PartGeometryCopySelectBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.features.PointSetFacePercentageBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.features.PointSetFacePercentageBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.features.SelectDatumCsysList
Removes all items from the list.
clear() - Method in interface nxopen.features.SelectFeatureList
Removes all items from the list.
clear() - Method in interface nxopen.features.sheetmetal.SMBoundaryConditionBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.features.sheetmetal.SMBoundaryConditionBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.features.shipdesign.AnchorPointList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.AnchorPointList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.features.shipdesign.BulkHeadListItemBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.BulkHeadListItemBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.features.shipdesign.CornerCutListItemBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.CornerCutListItemBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.features.shipdesign.DeckListItemBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.DeckListItemBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.features.shipdesign.ItFrameListItemBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.ItFrameListItemBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.features.shipdesign.OrientationRegionItemBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.OrientationRegionItemBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.features.shipdesign.PlaneListBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.PlaneListBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.features.shipdesign.SeamBlockBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.SeamBlockBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.features.shipdesign.SectionViewBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.SectionViewBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.features.shipdesign.ShipNamesBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.ShipNamesBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.features.shipdesign.StandardPartItemBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.StandardPartItemBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.features.shipdesign.SteelInsulationBoundaryBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.SteelInsulationBoundaryBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.features.shipdesign.SubSystemBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.SubSystemBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.features.shipdesign.TransFrameListItemBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.TransFrameListItemBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.features.SmoothRangeBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.features.SmoothRangeBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.features.subdivision.CageSectionDataList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.features.subdivision.CageSectionDataList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.features.VariableRadiusPointsBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.features.VariableRadiusPointsBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.features.vehicledesign.CloseRangeCameraListItemBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.features.vehicledesign.CloseRangeCameraListItemBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.features.vehicledesign.CloseRangeDemoCylinderListItemBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.features.vehicledesign.CloseRangeDemoCylinderListItemBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.fields.PathObjectsList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.fields.PathObjectsList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.gateway.BaseExplicitOrderBuilder
Clears the current order and restores it to the default order
License requirements: None.
clear() - Method in interface nxopen.geometricutilities.BlendSetbackBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.BlendSetbackBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.geometricutilities.BoundaryDefinitionBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.BoundaryDefinitionBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.geometricutilities.BoundingObjectBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.BoundingObjectBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.geometricutilities.EntityUsageInfoList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.EntityUsageInfoList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.geometricutilities.FaceSetOffsetList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.FaceSetOffsetList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.geometricutilities.FtmFixedCurvesBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.FtmFixedCurvesBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.geometricutilities.FtmTransformCurvesBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.FtmTransformCurvesBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.geometricutilities.FtmTransformPointsBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.FtmTransformPointsBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.geometricutilities.InstanceEditedExpressionItemList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.InstanceEditedExpressionItemList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.geometricutilities.ParentEquivalencyMapList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.ParentEquivalencyMapList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.geometricutilities.PatternIncrementItemList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.PatternIncrementItemList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.geometricutilities.PatternSpacingsListItemList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.PatternSpacingsListItemList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusFaceGroupBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusFaceGroupBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.geometricutilities.RotationSetBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.RotationSetBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.geometricutilities.ScalingSetBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.ScalingSetBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.geometricutilities.SelectionListList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.SelectionListList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.geometricutilities.StyledSweepDoubleOnPathDimBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.StyledSweepDoubleOnPathDimBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.geometricutilities.TransitionCurveBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.TransitionCurveBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.geometricutilities.TransitionLawNodeBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.TransitionLawNodeBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.geometricutilities.TwoExpressionsCollectorSetList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.TwoExpressionsCollectorSetList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.geometricutilities.TwoExpressionsSectionSetList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.TwoExpressionsSectionSetList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.layout2d.SelectComponentList
Removes all items from the list.
clear() - Method in interface nxopen.ListCreatorList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.ListCreatorList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.mechatronics.GanttOperationConditionBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.mechatronics.GanttOperationConditionBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.mechatronics.GanttOperationParameterBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.mechatronics.GanttOperationParameterBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.mechatronics.PathConstraintFrameBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.mechatronics.PathConstraintFrameBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.mechatronics.ProxyObjectParameterBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.mechatronics.ProxyObjectParameterBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.mechatronics.RuntimeFormulaParameterBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.mechatronics.RuntimeFormulaParameterBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.mechatronics.SelectCollisionSensorList
Removes all items from the list.
clear() - Method in interface nxopen.mechatronics.SelectLogicObjectList
Removes all items from the list.
clear() - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.mechatronics.SignalConnectionBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.mechatronics.SignalConnectionBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.motion.SignalChartListItemList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.motion.SignalChartListItemList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.NXObjectList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.NXObjectList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.ObjectList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.ObjectList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.PlaneList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.PlaneList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.PointList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.PointList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.RegionPointList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.RegionPointList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.routing.RunItemsBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.routing.RunItemsBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.ScCollectorList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.ScCollectorList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.Section
Clear the section of all its constituents
License requirements: gateway ("UG GATEWAY")
.
clear() - Method in interface nxopen.SectionList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.SectionList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.SelectBodyList
Removes all items from the list.
clear() - Method in interface nxopen.SelectCoordinateSystemList
Removes all items from the list.
clear() - Method in interface nxopen.SelectCurveList
Removes all items from the list.
clear() - Method in interface nxopen.SelectDatumPlaneList
Removes all items from the list.
clear() - Method in interface nxopen.SelectDisplayableObjectList
Removes all items from the list.
clear() - Method in interface nxopen.SelectEdgeList
Removes all items from the list.
clear() - Method in interface nxopen.SelectExpressionList
Removes all items from the list.
clear() - Method in interface nxopen.SelectFaceList
Removes all items from the list.
clear() - Method in interface nxopen.SelectIBaseCurveList
Removes all items from the list.
clear() - Method in interface nxopen.SelectIBasePlaneList
Removes all items from the list.
clear() - Method in interface nxopen.SelectICurveList
Removes all items from the list.
clear() - Method in interface nxopen.SelectINXObjectList
Removes all items from the list.
clear() - Method in interface nxopen.SelectIParameterizedSurfaceList
Removes all items from the list.
clear() - Method in interface nxopen.SelectNXObjectList
Removes all items from the list.
clear() - Method in interface nxopen.SelectObjectList
Removes all items from the list.
clear() - Method in interface nxopen.SelectPartList
Removes all items from the list.
clear() - Method in interface nxopen.SelectPlaneList
Removes all items from the list.
clear() - Method in interface nxopen.SelectPointList
Removes all items from the list.
clear() - Method in interface nxopen.SelectSplineList
Removes all items from the list.
clear() - Method in interface nxopen.SelectTaggedObjectList
Removes all items from the list.
clear() - Method in interface nxopen.sim.KinematicChainList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.sim.KinematicChainList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.sim.KinematicJunctionBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.sim.KinematicJunctionBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.TaggedObjectList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.TaggedObjectList
Clears the entire list
License requirements: None.
CLEAR - Static variable in class nxopen.tooling.MWPartingManagerBuilder.RegisterType
Clear all registered UNDO identifiers.
clear() - Method in interface nxopen.tooling.SelectReuseLibraryListItemBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.tooling.SelectReuseLibraryListItemBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.tooling.ShimInnerProfileSetBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.tooling.ShimInnerProfileSetBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.UFSession
clear() - Method in interface nxopen.weld.JointItemBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.weld.JointItemBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.weld.JointmarkFaceSetsBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.weld.JointmarkFaceSetsBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.weld.JointmarkGuideBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.weld.JointmarkGuideBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.weld.JointmarkPointsBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.weld.JointmarkPointsBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.weld.WeldBeadPathBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.weld.WeldBeadPathBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.weld.WeldBeadSizeBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.weld.WeldBeadSizeBuilderList
Clears the entire list
License requirements: None.
clear() - Method in interface nxopen.weld.WeldFillStripBuilderList
Clears the entire list
License requirements: None.
clear(ObjectList.DeleteOption) - Method in interface nxopen.weld.WeldFillStripBuilderList
Clears the entire list
License requirements: None.
CLEAR_AND_ENABLE_SPECIFIC - Static variable in class nxopen.Selection.SelectionAction
Clear selection and include selected objects
CLEAR_AXIAL - Static variable in class nxopen.cam.NcmTurnThreadBuilder.LocalReturnTypes
Clear Axial
CLEAR_AXIAL - Static variable in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.ReturnMoveModeTypes
Return Move: Clear Axial
CLEAR_AXIAL_DIRECT - Static variable in class nxopen.cam.NcmTurnThreadBuilder.LocalReturnTypes
Clear Axial-Direct
CLEAR_AXIAL_DIRECT - Static variable in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.ReturnMoveModeTypes
Return Move: Clear Axial-Direct
CLEAR_AXIAL_ONLY - Static variable in class nxopen.cam.TurnAvoidanceReturnBuilder.ReturnPointMotionTypes
Motion type: Axial to clearance plane only (no motion to point).
CLEAR_AXIAL_THEN_DIRECT - Static variable in class nxopen.cam.TurnAvoidanceGohomeBuilder.GohomePointMotionTypes
Motion type: Axial to clearance plane then direct to point.
CLEAR_AXIAL_THEN_DIRECT - Static variable in class nxopen.cam.TurnAvoidanceReturnBuilder.ReturnPointMotionTypes
Motion type: Axial to clearance plane then direct to point.
CLEAR_AXIAL_THEN_DIRECT - Static variable in class nxopen.cam.TurnAvoidanceStartBuilder.StartPointMotionTypes
Motion type: Axial to clearance plane then direct to point.
CLEAR_AXIAL_THEN_DIRECT - Static variable in class nxopen.cam.TurnAvoidanceStartOfEngageBuilder.StartOfEngageMotionTypes
Motion type: Axial to clearance plane then direct to start of engage.
CLEAR_RADIAL - Static variable in class nxopen.cam.NcmTurnThreadBuilder.LocalReturnTypes
Clear Radial
CLEAR_RADIAL - Static variable in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.ReturnMoveModeTypes
Return Move: Clear Radial
CLEAR_RADIAL_AXIAL_RADIAL - Static variable in class nxopen.cam.NcmTurnThreadBuilder.LocalReturnTypes
Clear Radial-Axial-Radial
CLEAR_RADIAL_AXIAL_RADIAL - Static variable in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.ReturnMoveModeTypes
Return Move: Clear Radial-Axial-Radial
CLEAR_RADIAL_CLEAR_AXIAL - Static variable in class nxopen.cam.NcmTurnThreadBuilder.LocalReturnTypes
Clear Radial-Clear Axial
CLEAR_RADIAL_CLEAR_AXIAL - Static variable in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.ReturnMoveModeTypes
Return Move: Clear Radial-Clear Axial
CLEAR_RADIAL_CLEAR_AXIAL_DIRECT - Static variable in class nxopen.cam.NcmTurnThreadBuilder.LocalReturnTypes
Clear Radial-Clear Axial-Direct
CLEAR_RADIAL_CLEAR_AXIAL_DIRECT - Static variable in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.ReturnMoveModeTypes
Return Move: Clear Radial-Clear Axial-Direct
CLEAR_RADIAL_DIRECT - Static variable in class nxopen.cam.NcmTurnThreadBuilder.LocalReturnTypes
Clear Radial-Direct
CLEAR_RADIAL_DIRECT - Static variable in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.ReturnMoveModeTypes
Return Move: Clear Radial-Direct
CLEAR_RADIAL_ONLY - Static variable in class nxopen.cam.TurnAvoidanceReturnBuilder.ReturnPointMotionTypes
Motion type: Radial to clearance plane only (no motion to point).
CLEAR_RADIAL_THEN_DIRECT - Static variable in class nxopen.cam.TurnAvoidanceGohomeBuilder.GohomePointMotionTypes
Motion type: Radial to clearance plane then direct to point.
CLEAR_RADIAL_THEN_DIRECT - Static variable in class nxopen.cam.TurnAvoidanceReturnBuilder.ReturnPointMotionTypes
Motion type: Radial to clearance plane then direct to point.
CLEAR_RADIAL_THEN_DIRECT - Static variable in class nxopen.cam.TurnAvoidanceStartBuilder.StartPointMotionTypes
Motion type: Radial to clearance plane then direct to point.
CLEAR_RADIAL_THEN_DIRECT - Static variable in class nxopen.cam.TurnAvoidanceStartOfEngageBuilder.StartOfEngageMotionTypes
Motion type: Radial to clearance plane then direct to start of engage.
CLEAR_WALLS - Static variable in class nxopen.cam.TurnEngageRetractBuilder.AutoOptions
Clear Walls
CLEAR_WALLS_BY_ANGLE_AND_DISTANCE - Static variable in class nxopen.cam.TurnEngageRetractBuilder.AutoOptions
Clear Walls by Angle and Distance
CLEAR_WALLS_BY_DISTANCE - Static variable in class nxopen.cam.TurnEngageRetractBuilder.AutoOptions
Clear Walls by Distance
clearAbort() - Method in interface nxopen.uf.UFAbort
clearAddingCandidates() - Method in interface nxopen.tooling.AssignPatchBuilder
Clear the m_addingCandidates list.
clearAll() - Method in interface nxopen.features.WaveInterfaceLinkerBuilder
Clear all selected objects
License requirements: None.
clearAllChecks() - Method in interface nxopen.geometricanalysis.ExamineGeometry
Clear or unset all types of checks
License requirements: None.
clearAllConstraints() - Method in interface nxopen.SketchAutoConstrainBuilder
Clear all of the indivivual constraints (turn toggle to off for each one)
License requirements: solid_modeling ("SOLIDS MODELING")
.
clearAllManualPairs() - Method in interface nxopen.cae.CorrelModePairingBuilder
Clear all manually paired mode pairs
License requirements: nx_correl_base ("FE Correlation")
.
clearAllPorts() - Method in interface nxopen.routing.LogicalTerminal
Clears the nxopen.routing.Port of all
nxopen.routing.Port s.
clearAllRegionTrackers() - Method in interface nxopen.geometricutilities.BooleanRegionSelect
Clears all region trackers currently registered on the feature
License requirements: solid_modeling ("SOLIDS MODELING")
.
clearAllTree() - Method in interface nxopen.weld.ConnectionFinderBuilder
Clears the tree list and allows you to perform another search.
clearance() - Method in interface nxopen.cae.modelcheck.FaceClearanceCheckBuilder
Returns the clearance.
CLEARANCE - Static variable in class nxopen.cam.NcmHoleMachining.FinalTypes
clearance
CLEARANCE - Static variable in class nxopen.cam.NcmHoleMachining.InitialTypes
Clearance - Tool Axis
CLEARANCE - Static variable in class nxopen.cam.NcmPlanarBuilder.FinalTypes
tool axis clearance
CLEARANCE - Static variable in class nxopen.cam.NcmPlanarBuilder.InitialTypes
tool axis to clearance
CLEARANCE - Static variable in class nxopen.cam.NcmPlanarBuilder.TransferBetweenLevelsTypes
clearance
CLEARANCE - Static variable in class nxopen.cam.NcmPlanarBuilder.TransferBetweenRegionsTypes
tool axis to clearance
CLEARANCE - Static variable in class nxopen.cam.NcmPlanarBuilder.TransferWithinLevelsTypes
tool axis to clearance
CLEARANCE - Static variable in class nxopen.cam.NcmTransfer.TransferTypes
tool axis to clearance
CLEARANCE - Static variable in class nxopen.cam.ProbeProtectedParametersBuilder.AppMethodTypes
from/to clearance
CLEARANCE - Static variable in class nxopen.cam.ProbeProtectedParametersBuilder.DepMethodTypes
from/to clearance
CLEARANCE - Static variable in class nxopen.cam.ToolPathSplitBuilder.TransferTypes
clearance transfer type
CLEARANCE - Static variable in class nxopen.cam.ToolPathSplitParametersBuilder.TransferTypes
clearance transfer type
Clearance - Interface in nxopen.die
Represents a die design clearance feature.
clearance() - Method in interface nxopen.die.DrawBeadBuilder
Returns the expression containing the clearance value between the male and female bead sheets.
clearance() - Method in interface nxopen.die.HandlingCoreBuilder
Returns the expression containing the value to use for the clearance offset of the core from the base plane.
clearance() - Method in interface nxopen.die.HandlingCoreChildBuilder
Returns the clearance of the handling core.
clearance() - Method in interface nxopen.die.HandlingCoreParentBuilder
Returns the clearance of handling cores.
clearance() - Method in interface nxopen.die.PressureSystemChildBuilder
Returns the clearance of the pressure system.
clearance() - Method in interface nxopen.die.PressureSystemParentBuilder
Returns the clearance of pressure systems.
clearance() - Method in interface nxopen.die.TrimFlangeDieAssistantBuilder
Returns the clearance used in the automatic generation of the lower post flange profile
License requirements: None.
clearance() - Method in interface nxopen.features.EmbossBodyBuilder
Returns the emboss clearance
License requirements: None.
clearance() - Method in interface nxopen.features.sheetmetal.AeroLighteningCutoutBuilder
Returns the clearance
License requirements: None.
clearance() - Method in interface nxopen.features.ToolingBoxBuilder
Returns the clearance value for box in six directions.
clearance() - Method in interface nxopen.motion.PackagingInterferenceBuilder
clearance() - Method in interface nxopen.routing.QuickPathBuilder
Returns the obstacle clearance value.
clearance() - Method in interface nxopen.tooling.CreateBoxBuilder
Returns the clearance value for box in six directions.
clearance() - Method in interface nxopen.tooling.GeneralInsertBuilder
Returns the clearance
License requirements: None.
CLEARANCE - Static variable in class nxopen.tooling.PiercingInsertBuilder.NormalBbpslugType
Bottom plate slug type is clearance
CLEARANCE - Static variable in class nxopen.tooling.PiercingInsertBuilder.NormalDsslugType
Die shoe slug type is clearance
CLEARANCE - Static variable in class nxopen.tooling.PiercingInsertBuilder.PunchPocketTypeItemsBP
Punch pocket type in backing plate is clearance
CLEARANCE - Static variable in class nxopen.tooling.PiercingInsertBuilder.PunchPocketTypeItemsPP
Punch pocket type in punch plate is clearance
CLEARANCE - Static variable in class nxopen.tooling.PiercingInsertBuilder.PunchPocketTypeItemsSP
Punch pocket type in stripper plate is clearance
clearance() - Method in interface nxopen.tooling.ReliefDesignBuilder
Returns the clearance of KF bounding box.
clearance() - Method in interface nxopen.tooling.ReplaceSolidBuilder
Returns the clearance value for box in six directions.
clearance() - Method in interface nxopen.tooling.TrimSolidBuilder
Returns the single side clearance value of the bounding box.
clearance1() - Method in interface nxopen.tooling.ReliefDesignBuilder
Returns the first clearance to create handle to control -X direction clearance.
clearance2() - Method in interface nxopen.tooling.ReliefDesignBuilder
Returns the second clearance to create handle to control -Y direction clearance.
clearance3() - Method in interface nxopen.tooling.ReliefDesignBuilder
Returns the third clearance to create handle to control -Z direction clearance.
clearance4() - Method in interface nxopen.tooling.ReliefDesignBuilder
Returns the fourth clearance to create handle to control +X direction clearance.
clearance5() - Method in interface nxopen.tooling.ReliefDesignBuilder
Returns the fifth clearance to create handle to control +Y direction clearance.
clearance6() - Method in interface nxopen.tooling.ReliefDesignBuilder
Returns the sixth clearance to create handle to control +Z direction clearance.
CLEARANCE_CUT_PLANE - Static variable in class nxopen.cam.NcmHoleMachining.FinalTypes
Clearance - Cut Plane
CLEARANCE_CUT_PLANE - Static variable in class nxopen.cam.NcmHoleMachining.InitialTypes
Clearance - Cut Plane
CLEARANCE_GEOM_COLOR - Static variable in class nxopen.uf.UFCamPref.CamPref
CLEARANCE_PLANE - Static variable in class nxopen.cam.PlungeMillingBuilder.TransferMethodTypes
Clearance Plane
CLEARANCE_PLANE - Static variable in class nxopen.cam.ToolPathEditorBuilder.ConnectionMethodType
CLEARANCE_SHORTEST_DISTANCE - Static variable in class nxopen.cam.NcmHoleMachining.FinalTypes
Clearance - Shortest Distance
CLEARANCE_SHORTEST_DISTANCE - Static variable in class nxopen.cam.NcmHoleMachining.InitialTypes
Clearance - Shortest Distance
clearanceAnalysisBodies() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
Returns the selection list containing the solid objects used in the clearance analysis.
ClearanceAnalysisBuilder - Interface in nxopen.assemblies
ClearanceAnalysisBuilder.CalculationMethodType - Class in nxopen.assemblies
Specify the analysis method.
ClearanceAnalysisBuilder.ClearanceBetweenEntity - Class in nxopen.assemblies
Specify the type of clearance analysis.
ClearanceAnalysisBuilder.ClearanceZoneSource - Class in nxopen.assemblies
Specify the source of the clearance zone
ClearanceAnalysisBuilder.CollectionRange - Class in nxopen.assemblies
Specify how to compare objects inside a collection.
ClearanceAnalysisBuilder.IsPairIncludedData - Class in nxopen.assemblies
ClearanceAnalysisBuilder.NumberOfCollections - Class in nxopen.assemblies
Specify the number of collections used for clearance analysis.
ClearanceAnalysisBuilder.PairClearanceZoneData - Class in nxopen.assemblies
ClearanceAnalysisBuilder.PairExcludedReason - Class in nxopen.assemblies
Specify the reason for excluding the pair
ClearanceAnalysisBuilder.ZoneType - Class in nxopen.assemblies
Specify the clearance zone type.
clearanceAnalysisComponents() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
Returns the selection list containing the components used in the clearance analysis.
clearanceBetween() - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder
Returns the setting to determine whether components or bodies should be used.
clearanceBuilder() - Method in interface nxopen.cam.NcmPlanarBuilder
Returns the clearance builder (inheritable tool dep)
License requirements: None.
clearanceBuilder() - Method in interface nxopen.cam.ProbeClearanceMoveBuilder
Returns the NCM clearance builder
License requirements: None.
ClearanceBuilder - Interface in nxopen.die
Represents a builder that is used to create or edit a
Clearance feature.
Identifies which type of input defines the clearance.
ClearanceBuilder.Types - Class in nxopen.die
Identifies which clearance type is being created in the casting.
clearanceCoefficient() - Method in interface nxopen.tooling.DieDesPierceInsertBuilder
Returns the clearance coefficient value.
clearanceCollision() - Method in interface nxopen.tooling.RunSimulationBuilder
Returns the clearance value of collision or interference
License requirements: None.
clearanceColor() - Method in interface nxopen.cam.Preferences
Returns the clearance color
License requirements: None.
clearanceDirection() - Method in interface nxopen.die.ClearanceBuilder
Returns the direction to use when extruding to create the clearance areas.
clearanceDirection() - Method in interface nxopen.die.FingerClearanceNotchBuilder
Returns the direction (pointing away from the solid) in which to clear material from the target solid.
clearanceDistance() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
Returns the clearance distance
License requirements: None.
clearanceDistance() - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder
Returns the transition clearance distance
License requirements: None.
clearanceDistance() - Method in interface nxopen.cam.ProbeProtectedParametersBuilder
Returns the safe clearance distance for external features
License requirements: None.
clearanceExpression() - Method in interface nxopen.motion.PackagingInterferenceBuilder
Returns the clearance expression value
License requirements: mechanisms ("MECHANISMS")
.
clearanceGeomColor - Variable in class nxopen.uf.UFCam.Preferences
clearanceGeometryType() - Method in interface nxopen.die.ClearanceBuilder
Returns the input type of the clearance geometry.
clearanceManagement() - Method in interface nxopen.tooling.ToolingManager
Returns the ClearanceManagementCollection instance belonging to this part .
ClearanceManagementBuilder - Interface in nxopen.tooling
Progressive Die Wizard builder to management clearances.
ClearanceManagementBuilder.Selection - Class in nxopen.tooling
Specifies clearance management part.
ClearanceManagementBuilder.Type - Class in nxopen.tooling
Specifies type to assign or check clearances
ClearanceManagementCollection - Interface in nxopen.tooling
clearancePlane() - Method in interface nxopen.cam.ToolPathDivideBuilder
Returns the Clearance Plane tag,plane entity type covers Xform and Plane
License requirements: None.
ClearanceSet - Interface in nxopen.assemblies
ClearanceSet.CopyMode - Class in nxopen.assemblies
Specify the dataset copy mode
ClearanceSet.InterferenceData - Class in nxopen.assemblies
ClearanceSet.InterferenceType - Class in nxopen.assemblies
Specify the type of interference
ClearanceSet.JobStatus - Class in nxopen.assemblies
Specify the job aborted status
ClearanceSet.NextInterferenceData - Class in nxopen.assemblies
ClearanceSet.PenetrationDepthResult - Class in nxopen.assemblies
The result of penetration depth calculation
ClearanceSet.ReanalyzeOutOfDateExcludedPairs - Class in nxopen.assemblies
Specify whether to reanalyze out-of-date excluded pairs.
ClearanceSet.ReanalyzePairCalculationMethod - Class in nxopen.assemblies
The analysis method to use when reanalyzing a pair.
ClearanceSet.Summary - Class in nxopen.assemblies
Summary of the most recent Clearance Analysis results
ClearanceSetCollection - Interface in nxopen.assemblies
clearanceSetName() - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder
Returns the clearance set name.
clearanceSets() - Method in interface nxopen.assemblies.ComponentAssembly
The collection of
ClearanceSet s defined in the ComponentAssembly
Created in NX9.0.0
Returns the clearance tolerance
License requirements: None.
clearanceType() - Method in interface nxopen.cam.NcmClearanceBuilder
Returns the clearance type
License requirements: None.
clearanceValue() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
Returns the expression containing the clearance value used in the clearance analysis.
clearanceValue() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
Returns the clearance value.
clearAndAdd(NXObject[], View, Point3d) - Method in interface nxopen.features.subdivision.SelectCageObjectData
Clears the currently present objects and adds new objects.
clearCache() - Method in interface nxopen.cae.GRMSearch
Clear the cache of searched CAE objects such that a subsequent call
to "FindCachedReferencers" will return nothing.
clearCheck(ExamineGeometry.Check) - Method in interface nxopen.geometricanalysis.ExamineGeometry
Clear or unset a specified type of check
License requirements: None.
clearCheckerNodes() - Method in interface nxopen.validate.Validator
Clears checker nodes
License requirements: ug_checkmate ("UG Check Mate")
.
clearConcurrent() - Method in interface nxopen.routing.DesignRuleManager
Remove all objects from the concurrent check list
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
clearContext() - Method in interface nxopen.uf.UFHelp
clearDeleteList() - Method in interface nxopen.Update
Clears the contents of the global delete list.
clearElements() - Method in interface nxopen.mechatronics.CamProfileBuilder
Clear elements .
clearErrorList() - Method in interface nxopen.Update
Clears the error list.
clearFaceSets() - Method in interface nxopen.weld.WeldPointBuilder
The clear for all existed facesets
License requirements: ugweld ("UG WELD")
.
clearFeatureTypes() - Method in interface nxopen.features.shipdesign.FeaturesBatchOperationBuilder
Clear feature types
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
clearFittingPoints() - Method in interface nxopen.tooling.CoolingFittingData
Clear cooling fitting points from the fitting data.
clearFormTbl(Tag) - Method in interface nxopen.uf.UFSmd
clearGeometryOfMap(TaggedObject) - Method in interface nxopen.cae.ManualMorphBuilder
Removes all the selected geometry from the manual map
License requirements: nx_masterfem ("Finite Element Modeling")
.
clearHistoryList(UFVariant) - Method in interface nxopen.uf.UFPart
clearHoleData() - Method in interface nxopen.tooling.RemoveHolesBuilder
Clear all the hole data that was input to the builder.
clearHoleFills() - Method in interface nxopen.facet.FillHoleBuilder
Cleans up local meshes associated with each fill.
clearHoles() - Method in interface nxopen.facet.FillHoleBuilder
Removes all holes, deletes associated hole polylines.
clearIndex(int) - Method in interface nxopen.annotations.ArbitraryAreaSeedBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.annotations.DatumReferenceBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.annotations.LeaderDataList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.annotations.MasterSymbolListItemBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.annotations.SymbolCatalogParameterBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.annotations.TitleBlockCellBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.assemblies.PartitionList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.BodyList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.cae.DependentMeshListItemBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.cae.ManualSweepBetweenListItemSelectionList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.cae.MeshManualSweepBetweenListItemSelectionList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.cam.BoundaryMemberSetList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.cam.BoundarySetList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.cam.BoundaryTurnVariableStockSetList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.cam.CAMFeatureList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.cam.CollisionPairBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.cam.CustomLoopSetList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.cam.CutVolumeList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.cam.DriveChainItemBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.cam.GeometrySetList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.cam.HoldingSystemBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.cam.HoleBossSetList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.cam.InPathEventDataBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.cam.LaserControlPointList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.cam.ManualFeatureBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.cam.SplitterList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.cam.SurfaceDriveGeometrySetList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.cam.TabPointDataBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.cam.ThreadedBossSetList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.cam.ThreadedHoleSetList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.cam.ToolPathSplitItemBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.cam.UdeList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.cam.WedmCustomBoundaryDataBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.cam.WireGuideList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.DateItemBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.die.DieAssistantFlangeProfileList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.die.DieAssistantTrimProfileList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.die.DieBooleanBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.die.DieLimitsBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.die.DieLocationBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.die.DrawBeadSegmentBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.die.PierceItemBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.drafting.AttributeItemBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.drafting.PrimaryContentItemBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.drawings.SectionLineSegmentBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.drawings.ViewStyleShipbuildingLinesBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.ExpressionCollectorSetList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.ExpressionSectionSetList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.features.GlobalShapingCurveOffsetBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.features.GlobalShapingPointOffsetBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.features.PartGeometryCopySelectBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.features.PointSetFacePercentageBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.features.sheetmetal.SMBoundaryConditionBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.features.shipdesign.AnchorPointList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.features.shipdesign.BulkHeadListItemBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.features.shipdesign.CornerCutListItemBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.features.shipdesign.DeckListItemBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.features.shipdesign.ItFrameListItemBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.features.shipdesign.OrientationRegionItemBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.features.shipdesign.PlaneListBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.features.shipdesign.SeamBlockBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.features.shipdesign.SectionViewBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.features.shipdesign.ShipNamesBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.features.shipdesign.StandardPartItemBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.features.shipdesign.SteelInsulationBoundaryBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.features.shipdesign.SubSystemBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.features.shipdesign.TransFrameListItemBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.features.SmoothRangeBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.features.subdivision.CageSectionDataList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.features.VariableRadiusPointsBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.features.vehicledesign.CloseRangeCameraListItemBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.features.vehicledesign.CloseRangeDemoCylinderListItemBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.fields.PathObjectsList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.geometricutilities.BlendSetbackBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.geometricutilities.BoundaryDefinitionBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.geometricutilities.BoundingObjectBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.geometricutilities.EntityUsageInfoList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.geometricutilities.FaceSetOffsetList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.geometricutilities.FtmFixedCurvesBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.geometricutilities.FtmTransformCurvesBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.geometricutilities.FtmTransformPointsBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.geometricutilities.InstanceEditedExpressionItemList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.geometricutilities.ParentEquivalencyMapList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.geometricutilities.PatternIncrementItemList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.geometricutilities.PatternSpacingsListItemList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusFaceGroupBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.geometricutilities.RotationSetBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.geometricutilities.ScalingSetBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.geometricutilities.SelectionListList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.geometricutilities.StyledSweepDoubleOnPathDimBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.geometricutilities.TransitionCurveBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.geometricutilities.TransitionLawNodeBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.geometricutilities.TwoExpressionsCollectorSetList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.geometricutilities.TwoExpressionsSectionSetList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.ListCreatorList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.mechatronics.GanttOperationConditionBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.mechatronics.GanttOperationParameterBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.mechatronics.PathConstraintFrameBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.mechatronics.ProxyObjectParameterBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.mechatronics.RuntimeFormulaParameterBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.mechatronics.SignalConnectionBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.motion.SignalChartListItemList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.NXObjectList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.ObjectList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.PlaneList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.PointList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.RegionPointList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.routing.RunItemsBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.ScCollectorList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.SectionList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.sim.KinematicChainList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.sim.KinematicJunctionBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.TaggedObjectList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.tooling.SelectReuseLibraryListItemBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.tooling.ShimInnerProfileSetBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.weld.JointItemBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.weld.JointmarkFaceSetsBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.weld.JointmarkGuideBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.weld.JointmarkPointsBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.weld.WeldBeadPathBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.weld.WeldBeadSizeBuilderList
Deletes the item at the index specified.
clearIndex(int) - Method in interface nxopen.weld.WeldFillStripBuilderList
Deletes the item at the index specified.
clearLayup() - Method in interface nxopen.cae.Laminate
Removes all the ply groups and plies from the laminate physical
License requirements: nx_lam_composites ("Laminate Composites")
.
clearLayup() - Method in interface nxopen.cae.LaminateGlobalLayup
Removes all the ply groups and plies from the global layup
License requirements: nx_lam_composites ("Laminate Composites")
.
clearList(int) - Method in interface nxopen.tooling.EdgePatchBuilder
Clear the index list.
clearMarking(NXObject) - Method in interface nxopen.weld.ConnectionFinderBuilder
Unmarks (removes save or delete mark) the weld feature from processing.
clearNetwork() - Method in interface nxopen.positioning.Positioner
Removes the
Network of the positioner.
Removes all the selected nodes from the manual map
License requirements: nx_masterfem ("Finite Element Modeling")
.
clearPartNodes() - Method in interface nxopen.validate.Validator
Clears part nodes
License requirements: None.
clearPlotLayout() - Method in interface nxopen.PlotBuilder
Clear Plot from Layout.
clearPlotLayout() - Method in interface nxopen.uf.UFPlot
clearPreCreatedBoundedPlaneAndEnlargedSurface(int) - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
Clear the pre-created bounded plane and enlarged surface if no longer needed.
clearPreCreatedExtrudeAndSweptSurface(int) - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
Clear the pre-created extrude and swept surfaces for preview if no longer needed.
clearReferencesToReuse() - Method in interface nxopen.features.MirrorBuilder
Clears all the existing references to reuse so that new references can be added
License requirements: solid_modeling ("SOLIDS MODELING")
.
clearRegions() - Method in interface nxopen.geometricutilities.BooleanRegionSelect
Clears all preview regions and the current region trackers
License requirements: solid_modeling ("SOLIDS MODELING")
.
clearReportObjects() - Method in interface nxopen.visualreporting.VisualReportExplorer
Remove all objects from the visual report.
clearResultObjects() - Method in interface nxopen.validate.Parser
Clears result objects
License requirements: None.
clearSplitPoints() - Method in interface nxopen.features.subdivision.SubdivisionSplitFaceBuilder
Clear split face point.
clearThePaintPath() - Method in interface nxopen.facet.PaintBrushBuilder
Clears the paint path
License requirements: None.
clearUserDefinedObjectStatus() - Method in interface nxopen.userdefinedobjects.UserDefinedObject
Clears the out of data indicator (status) of this UDO
License requirements: None.
clearValues() - Method in interface nxopen.routing.EditCharacteristicsBuilder
Clear the characteristic values of the selected objects.
CLI - Static variable in class nxopen.cae.optimization.TBSSmoothBuilder.SliceFormatOption
Saves slices as polygons saved in common layer interface format
CLIFF - Static variable in class nxopen.features.DeleteFaceBuilder.FaceEdgeBlendPreferenceOptions
Delete as cliff blend.
cliffEdge - Variable in class nxopen.uf.UFModl.BlendEdge
cliffEdges() - Method in interface nxopen.features.EdgeBlendBuilder
Returns the forced cliff edges for edge blend
License requirements: None.
cliffOverflow - Variable in class nxopen.uf.UFModl.EdgeBlendData
cliffOverflow - Variable in class nxopen.uf.UFModl.EdgeBlendMultData
cliffProjectOntoSecondWall() - Method in interface nxopen.features.FaceBlendBuilder
Returns the cliff projection option for face blend
License requirements: None.
CLIMB - Static variable in class nxopen.cam.AreaMillingContainment.CutDirectionTypes
Climb
CLIMB - Static variable in class nxopen.cam.CylinderMillingCutParameters.CutDirectionTypes
Climb cut
CLIMB - Static variable in class nxopen.cam.DmRotaryFloorFinishBuilder.CutDirType
climb
CLIMB - Static variable in class nxopen.cam.FeatureMillingCutParameters.CuttingDirectionTypes
Climb cut
CLIMB - Static variable in class nxopen.cam.FlowCutSteepContainment.CutDirectionTypes
Climb
CLIMB - Static variable in class nxopen.cam.ThreadMillingCutParameters.CutDirectionTypes
Climb cut
CLINCH - Static variable in class nxopen.uf.UFConstants
CLINCH - Static variable in class nxopen.weld.PointMarkBuilder.WeldTypes
Clinch
CLINCH - Static variable in class nxopen.weld.WeldAdvisorCustomerDefault
Clinch
CLINCH - Static variable in class nxopen.weld.WeldFeatureSetType
Clinch
CLINCH_FEATURE - Static variable in class nxopen.uf.UFConstants
CLINCH_FEATURE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
CLINCH_NA_TYPE - Static variable in class nxopen.uf.UFWeld.Types
CLINCH_NON_ASSOC - Static variable in class nxopen.uf.UFConstants
CLINCH_NON_ASSOCIATIVE - Static variable in class nxopen.uf.UFConstants
CLINCH_TYPE - Static variable in class nxopen.uf.UFWeld.Types
CLINCH_WELD - Static variable in class nxopen.uf.UFConstants
CLINCH_WELD - Static variable in class nxopen.uf.UFDisp.PolyMarker
CLINCH_WELD - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
CLINCH_WELD_NON_ASSOCIATIVE - Static variable in class nxopen.uf.UFConstants
CLIP - Static variable in class nxopen.cae.SimConditionSequence.OutOfRangeBehavior
CLIP - Static variable in class nxopen.formboard.UpdateDiscrepancy.ObjectType
A component not assigned as a
electrical connector.
ClipboardOperationsManager - Interface in nxopen
Used to create importer objects.
clipboardOperationsManager() - Method in interface nxopen.Part
Returns the ClipboardOperations manager for this part .
clipOrdinateDimensionLine() - Method in interface nxopen.annotations.LineAndArrowPreferences
Returns the clipping of the dimension line to the ordinate origin at the view border
License requirements: None.
clipOrdinateDimensionLine() - Method in interface nxopen.annotations.LineArrowStyleBuilder
Returns the clipping of the dimension line to the ordinate origin at the view border
License requirements: None.
CLIPPED - Static variable in class nxopen.cae.Post.LimitDisplay
clipped - Variable in class nxopen.uf.UFView.AskVisibleObjectsData
Clipping() - Constructor for class nxopen.cae.Post.Clipping
Clipping(boolean, boolean, double, Post.ClipSide, Post.ClipPlane, Result.CoordinateSystem) - Constructor for class nxopen.cae.Post.Clipping
Constructor for the Clipping object.
ClippingParameters - Interface in nxopen.cae
This class is worked as a packet of information that can be used to set the clipping parameters of a
Post object.
Returns the clip type
License requirements: None.
clipValue - Variable in class nxopen.cae.Post.Clipping
clockInstance(Tag, String, String) - Method in interface nxopen.uf.UFModlGeneral
ClockPartBuilder - Interface in nxopen.routing
clockType() - Method in interface nxopen.geometricutilities.PatternClocking
clockType() - Method in interface nxopen.geometricutilities.PatternClockingBuilder
Returns the clocking enum to determine if linear or angular clocking
License requirements: None.
CLOCKWISE - Static variable in class nxopen.cam.InspectionAlignmentBuilder.RotateTableDirections
Rotate table in clockwise direction
CLOCKWISE - Static variable in class nxopen.cam.WedmCutParameters.CutDirectionTypes
clockwise cut direction
clone() - Method in class nxopen.Enum
Throws CloneNotSupportedException
CLONE - Static variable in class nxopen.uf.UFClone.Action
CLONE_FEM_IDEAL - Static variable in class nxopen.uf.UFClone.CloneRelCae
CLONE_IDEAL - Static variable in class nxopen.uf.UFClone.CloneRelCae
CLONE_NONE - Static variable in class nxopen.uf.UFClone.CloneRelCae
CLONE_OPERATION - Static variable in class nxopen.uf.UFClone.OperationClass
CLONE_SIM_FEM_IDEAL - Static variable in class nxopen.uf.UFClone.CloneRelCae
cloneAxissearch(DurabilityAxisSearch) - Method in interface nxopen.cae.DurabilityAxisSearchCollection
Clones a durability stress axes.
cloneBc() - Method in interface nxopen.cae.SimBC
Clones a BC
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
cloneClass() - Method in interface nxopen.UFSession
cloneConstraint(CfdContactPreventionConstraint) - Method in interface nxopen.cae.CfdContactPreventionConstraintCollection
Clones a contact prevention constraint.
cloneConstraint(CfdLocalResolutionConstraint) - Method in interface nxopen.cae.CfdLocalResolutionConstraintCollection
Clones a local resolution constraint.
cloneCorrelation() - Method in interface nxopen.cae.CorrelSolution
Make a clone of a correl solution.
clonedProductName() - Method in interface nxopen.tooling.ChangeoverManagementBuilder
Returns the name of the cloned product pack used to create a new changeover.
cloneDynamicEvent(LaminateDynamicEvent) - Method in interface nxopen.cae.LaminateDynamicEventCollection
Clones the laminate dynamic event
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
cloneDynamicSim(LaminateDynamicSim) - Method in interface nxopen.cae.LaminateDynamicSimCollection
Clones the laminate dynamic sim
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
cloneEvent(DurabilityEvent) - Method in interface nxopen.cae.DurabilityEventCollection
Makes a clone of a durability event.
cloneEvent(RSEvent, String) - Method in interface nxopen.cae.responsesimulation.Solution
Clones an event to the solution
License requirements: nx_response_anlys ("NX Response Analysis")
.
cloneExcitation(DurabilityExcitation) - Method in interface nxopen.cae.DurabilityExcitationCollection
Clones a durability excitation.
cloneExciterConfig(PreTestExciterConfig) - Method in interface nxopen.cae.PreTestExciterConfigCollection
Clone a pre-test exciter configuration
License requirements: nx_correl_base ("FE Correlation")
.
cloneFatigue(DurabilityFatigue) - Method in interface nxopen.cae.DurabilityFatigueCollection
Clones a durability event fatigue settings.
cloneFolder() - Method in interface nxopen.cae.SimLbcFolder
Clones a folder
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
cloneMetasolution(DurabilityMetaSolution) - Method in interface nxopen.cae.DurabilityMetaSolutionCollection
Clones a durability metasolution.
cloneMethod() - Method in interface nxopen.tooling.CloneObject
Returns the clone method
License requirements: None.
cloneModelupdate() - Method in interface nxopen.cae.ModelUpdateSolution
Make a clone of a model update solution.
CloneObject - Interface in nxopen.tooling
Represents the clone operation in Add Reusable Component Builder.
ClonePart - Interface in nxopen.tooling
Represents the part inforamtion to be cloned in Add Reusable Component Builder.
clonePostView(int) - Method in interface nxopen.uf.UFSfPost
clonePretest(PreTestSolution) - Method in interface nxopen.cae.PreTestSolutionCollection
Clone a pre-test
License requirements: nx_correl_base ("FE Correlation")
.
cloneRandomFatigue(DurabilityRandomFatigue) - Method in interface nxopen.cae.DurabilityRandomFatigueCollection
Clones a durability event fatigue settings.
cloneScenario(Tag, String, String) - Method in interface nxopen.uf.UFSf
cloneSection(BeamSection) - Method in interface nxopen.cae.BeamSectionCollection
cloneSection(boolean, Section) - Method in interface nxopen.features.AOCSBuilder
Clone section.
cloneSection() - Method in interface nxopen.Section
Clone section.
cloneSensor(Sensor, String) - Method in interface nxopen.cae.responsesimulation.Solution
Clones a sensor to the solution
License requirements: nx_response_anlys ("NX Response Analysis")
.
cloneSensorConfig(PreTestSensorConfig) - Method in interface nxopen.cae.PreTestSensorConfigCollection
Clone a pre-test sensor configuration
License requirements: nx_correl_base ("FE Correlation")
.
cloneSimulation(NXObject, String) - Method in interface nxopen.motion.MotionSession
Clone the Simulation.
cloneSolution(CorrelSolution, String) - Method in interface nxopen.cae.CorrelSolutionCollection
Clones a correl meta solution
License requirements: None.
cloneSolution(TBSOptimizationSolution, boolean) - Method in interface nxopen.cae.optimization.TBSOptimizationSolutionCollection
Clones an optimization solution and the associated result file optional
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
cloneSolution(Solution, String) - Method in interface nxopen.cae.responsesimulation.SolutionCollection
Clones a response analysis meta solution
License requirements: nx_response_anlys ("NX Response Analysis")
.
cloneSolution(SimSolution, String) - Method in interface nxopen.cae.SimSimulation
Clone the solution
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
cloneSolveoptions(DurabilitySolveOptions) - Method in interface nxopen.cae.DurabilitySolveOptionsCollection
Clones a durability event override.
cloneStep(String) - Method in interface nxopen.cae.SimSolutionStep
Clone the solution step
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
cloneStrainGage(StrainGage, String) - Method in interface nxopen.cae.responsesimulation.Solution
Clones a strain gage to the solution
License requirements: nx_response_anlys ("NX Response Analysis")
.
cloneStrength(DurabilityStrength) - Method in interface nxopen.cae.DurabilityStrengthCollection
Clones a durability event strength settings.
close(BasePart.CloseWholeTree, BasePart.CloseModified, PartCloseResponses) - Method in interface nxopen.BasePart
Closes an open part.
close() - Method in interface nxopen.blockstyler.BlockDialog.Close
Close callback
License requirements: None.
CLOSE - Static variable in class nxopen.features.sheetmetal.ClosedCornerBuilder.ClosureTypeOptions
close() - Method in interface nxopen.geometricutilities.BoundaryDefinitionBuilder
Closes the boundary by appending start point at the end of boundary definition
License requirements: studio_free_form ("STUDIO FREE FORM")
.
close() - Method in interface nxopen.issue.IssueBriefcase
close(String) - Method in interface nxopen.issue.IssueContent
Closes the issue
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.
close() - Method in interface nxopen.ListingWindow
Closes the stream to the listing window.
close() - Method in interface nxopen.tooling.DieBaseBuilder
Returns the die close status value.
close() - Method in interface nxopen.tooling.SpreadsheetData
Close the spreadsheet and exit excel App
License requirements: None.
close(Tag, int, int) - Method in interface nxopen.uf.UFPart
CLOSE - Static variable in class nxopen.uistyler.FileOperationData.FileOperationType
Close file operation
CLOSE_AND_RELIEF - Static variable in class nxopen.features.sheetmetal.ClosedCornerBuilder.Types
CLOSE_FAILURE - Static variable in class nxopen.RuleManager.InitializationStatusType
Close failed
CLOSE_MODIFIED - Static variable in class nxopen.BasePart.CloseModified
Close all modified parts
CLOSE_PART_REASON - Static variable in class nxopen.uf.UF.CallbackReason
closeAll(BasePart.CloseModified, PartCloseResponses) - Method in interface nxopen.PartCollection
Closes all the parts open in the session.
closeAll() - Method in interface nxopen.uf.UFPart
closeComponents(Component[], BasePart.CloseWholeTree, ComponentAssembly.CloseModified) - Method in interface nxopen.assemblies.ComponentAssembly
Given an array of components, close the components.
closeCornerDia - Variable in class nxopen.uf.UFNxsm.MitreCflangeData
closeCornerType - Variable in class nxopen.uf.UFNxsm.MitreCflangeData
closeCset(Tag) - Method in interface nxopen.uf.UFPart
CLOSED - Static variable in class nxopen.annotations.LineWeldBuilder.WeldSymbolWeldAlongContourType
CLOSED - Static variable in class nxopen.cam.BoundarySet.BoundaryTypes
close boundary
CLOSED - Static variable in class nxopen.drawings.ArrowStyleType
Closed
CLOSED - Static variable in class nxopen.drawings.SectionLineStyleBuilder.ArrowheadStyleType
Deprecated.
CLOSED - Static variable in class nxopen.drawings.ViewProjectedArrowSettingsBuilder.DimensionsStyleType
CLOSED - Static variable in class nxopen.drawings.ViewSectionLineBuilder.StyleType
CLOSED - Static variable in class nxopen.features.sheetmetal.AeroFlangeBuilder.EndType
Periodic Bend Edge
CLOSED - Static variable in class nxopen.features.sheetmetal.ClosedCornerBuilder.TreatmentTypeOptions
Bend and Webs will be closed
CLOSED - Static variable in class nxopen.features.sheetmetal.EditCornerBuilder.BendClosureTypeOptions
CLOSED - Static variable in class nxopen.features.sheetmetal.EditCornerBuilder.PlateClosureTypeOptions
CLOSED - Static variable in class nxopen.features.sheetmetal.MiterOptions.ClosedCornerTypeOptions
corner is closed completely
CLOSED - Static variable in class nxopen.features.sheetmetal.ThreeBendCornerBuilder.TreatmentTypeOptions
closed() - Method in interface nxopen.Polyline
Returns the flag indicating if the polyline is closed
License requirements: None.
CLOSED - Static variable in class nxopen.preferences.RoutingLogical.FlowArrowEnumType
Closed arrow head on flow arrow.
closed() - Method in interface nxopen.SketchEllipseBuilder
Returns the closed flag
License requirements: None.
closed - Variable in class nxopen.uf.UFCurve.LineArc
CLOSED_ARROW - Static variable in class nxopen.annotations.ArrowheadType
CLOSED_ARROW - Static variable in class nxopen.annotations.LeaderData.ArrowheadType
Closed arrowhead type
CLOSED_ARROW - Static variable in class nxopen.uf.UFDrf.ArrowheadAndFillType
CLOSED_ARROWHEAD - Static variable in class nxopen.uf.UFDraw.ArwHeadCntl
CLOSED_CURVE_IN_LIST - Static variable in class nxopen.uf.UFConstants
CLOSED_CURVES - Static variable in class nxopen.tooling.ScrapDesignBuilder.ScrapDefType
Close curves will be used to create scraps
CLOSED_DOUBLE_ARROW - Static variable in class nxopen.annotations.ArrowheadType
CLOSED_DOUBLE_ARROW - Static variable in class nxopen.annotations.LeaderData.ArrowheadType
Closed double arrowhead type
CLOSED_DOUBLE_ARROW - Static variable in class nxopen.uf.UFDrf.ArrowheadAndFillType
CLOSED_DOUBLE_SOLID_ARROW - Static variable in class nxopen.annotations.ArrowheadType
CLOSED_DOUBLE_SOLID_ARROW - Static variable in class nxopen.annotations.LeaderData.ArrowheadType
Closed double solid arrowhead type
CLOSED_DOUBLE_SOLID_ARROW - Static variable in class nxopen.uf.UFDrf.ArrowheadAndFillType
CLOSED_HEM_TYPE - Static variable in class nxopen.features.sheetmetal.HemFlangeBuilder.TypeOptions
CLOSED_LOOP - Static variable in class nxopen.cae.MeshFromBoundaryBuilder.LoopOption
closed loop
CLOSED_LOOP - Static variable in class nxopen.motion.SignalChartBuilder.Type
Closed loop
CLOSED_LOOP_HEM_TYPE - Static variable in class nxopen.features.sheetmetal.HemFlangeBuilder.TypeOptions
CLOSED_SOLID - Static variable in class nxopen.drawings.ArrowStyleType
Close Solid
CLOSED_SOLID_ARROW - Static variable in class nxopen.annotations.ArrowheadType
CLOSED_SOLID_ARROW - Static variable in class nxopen.annotations.LeaderData.ArrowheadType
Closed solid arrowhead type
CLOSED_SOLID_ARROW - Static variable in class nxopen.uf.UFDrf.ArrowheadAndFillType
CLOSED_SURFACE_NOT_SUPPORTED - Static variable in class nxopen.uf.UFConstants
ClosedCorner - Interface in nxopen.features
Represents a ClosedCorner feature
To create or edit an instance of this class, use
ClosedCornerBuilder
Created in NX5.0.0
Represents a Closed corner feature builder.
ClosedCornerBuilder.ClosureTypeOptions - Class in nxopen.features.sheetmetal
This enum represents Corner Closure type
ClosedCornerBuilder.FacePairData - Class in nxopen.features.sheetmetal
ClosedCornerBuilder.OriginTypes - Class in nxopen.features.sheetmetal
This enum represents Origin type
ClosedCornerBuilder.TreatmentTypeOptions - Class in nxopen.features.sheetmetal
This enum represents Corner treatment type
ClosedCornerBuilder.Types - Class in nxopen.features.sheetmetal
This enum represents the feature types.
ClosedCornerData() - Constructor for class nxopen.uf.UFNxsm.ClosedCornerData
ClosedCornerData(Tag[], int, Tag[], UFNxsm.FeaturePropertyConstants, UFNxsm.FeaturePropertyConstants, String, String, String) - Constructor for class nxopen.uf.UFNxsm.ClosedCornerData
closedCornerType() - Method in interface nxopen.features.sheetmetal.MiterOptions
Returns the closed corner option type.
closedCornerVAngle1() - Method in interface nxopen.features.sheetmetal.MiterOptions
Returns the v cutout angle1 expression of the closed corner.
closedCornerVAngle2() - Method in interface nxopen.features.sheetmetal.MiterOptions
Returns the v cutout angle2 expression of the closed corner.
closedInV() - Method in interface nxopen.features.ThroughCurvesBuilder
Returns the closed in V.
closedSignalList() - Method in interface nxopen.motion.SignalChartBuilder
Returns the closed siganl list
License requirements: nx_motion_motor ("NX Motion Motor")
.
closedStartOrientation() - Method in interface nxopen.die.DrawDiePunchBuilder
Returns the closed start orientation of the draw die punch casting.
closeFiles(File[]) - Method in interface nxopen.markup.MarkupFileCollection
Closes a nxopen.Markup.File
License requirements: None.
closeGap - Variable in class nxopen.uf.UFModl.WrapAssem
closeGap - Variable in class nxopen.uf.UFModl.WrapGeom
closeGaps() - Method in interface nxopen.features.WrapGeometryBuilder
Returns the Method used to close the gaps after offset of the wrap
License requirements: None.
closeGaps() - Method in interface nxopen.sim.SinumerikCaSimplifyBodiesBuilder
Returns the Method used to close the gaps after offset of the wrap
License requirements: None.
closeListingWindow() - Method in interface nxopen.uf.UFUi
closePart(NXObject, BasePart.CloseWholeTree, BasePart.CloseModified) - Method in interface nxopen.tooling.ToolingSession
Close an existing part
License requirements: None.
closePoint1 - Variable in class nxopen.Measurement.DisplayMinimumDistanceData
Close point on first object
closePoint1 - Variable in class nxopen.Measurement.MinimumDistanceData
Close point on first object
closePoint2 - Variable in class nxopen.Measurement.DisplayMinimumDistanceData
Close point on second object
closePoint2 - Variable in class nxopen.Measurement.MinimumDistanceData
Close point on second object
closeProfileRule() - Method in interface nxopen.geometricutilities.SmartVolumeProfileBuilder
Returns the option defines how to extend the open profile to form a proper intersection with the target body.
CloseRangeBlindVolumeListItemBuilder - Interface in nxopen.features.vehicledesign
Represents the builder to create blind volume list item used for close range visibility.
CloseRangeCameraListItemBuilder - Interface in nxopen.features.vehicledesign
Represents the builder to create camera list item used for close range visibility.
CloseRangeCameraListItemBuilder.Types - Class in nxopen.features.vehicledesign
This enum represents the camera definition options to define the close range visibility.
CloseRangeCameraListItemBuilderList - Interface in nxopen.features.vehicledesign
Represents a list of objects.
CloseRangeDemoCylinderListItemBuilder - Interface in nxopen.features.vehicledesign
Represents the builder to create demo cylinder list item used for close range visibility.
CloseRangeDemoCylinderListItemBuilder.ValidateTypes - Class in nxopen.features.vehicledesign
This enum represents the simple or detailed checking options to validate demo cylinders visibility.
CloseRangeDemoCylinderListItemBuilderList - Interface in nxopen.features.vehicledesign
Represents a list of objects.
CloseRangeVisibility - Interface in nxopen.features.vehicledesign
Represents a close range visibility feature
To create or edit an instance of this class, use
CloseRangeVisibilityBuilder
Created in NX8.5.0
The builder to create close range visibility feature.
CloseRangeVisibilityBuilder.EyePointOffsetTypes - Class in nxopen.features.vehicledesign
This enum represents the eye position offset options.
CloseRangeVisibilityBuilder.EyePointTypes - Class in nxopen.features.vehicledesign
This enum represents the binocular or monocular eye position definition options.
CloseRangeVisibilityBuilder.PathPositionTypes - Class in nxopen.features.vehicledesign
This enum represents the cylinder path position display options.
CloseRangeVisibilityBuilder.PositionMethods - Class in nxopen.features.vehicledesign
This enum represents the cylinder position method options.
CloseRangeVisibilityBuilder.PositionPaths - Class in nxopen.features.vehicledesign
This enum represents the cylinder position path options.
CloseRangeVisibilityBuilder.RequirementsControlType - Class in nxopen.features.vehicledesign
This enum represents the standard or user defined requirement options.
closeScenario() - Method in interface nxopen.uf.UFSf
CLOSEST - Static variable in class nxopen.cam.fbm.FeatureGeometry.SortOrder
Sort order: Closet
CLOSEST - Static variable in class nxopen.cam.HoleBossGeom.OptimizationTypes
Optimization: Closet
CLOSEST - Static variable in class nxopen.cam.RoughTurningBuilder.ReversalModeTypes
Reversal mode: Closest
closeStlFile(UFVariant) - Method in interface nxopen.uf.UFStd
closestPoint - Variable in class nxopen.geometricanalysis.GeometricProperties.CaeCurve
closest point on curve in Root Part Coordinates
closestPoint - Variable in class nxopen.geometricanalysis.GeometricProperties.CaeFace
closest point on face in Root Part Coordinates
closestPoint - Variable in class nxopen.uf.UFEval.EvaluateClosestPointData
closestPoint - Variable in class nxopen.uf.UFSf.AskClosestPointData
closestPointInWcs - Variable in class nxopen.geometricanalysis.GeometricProperties.CaeCurve
closest point on curve in Work Part Coordinates
closestPointInWcs - Variable in class nxopen.geometricanalysis.GeometricProperties.CaeFace
closest point in Work Part Coordinates
closeTestOutput() - Method in interface nxopen.BaseSession
closeWindow(int) - Method in interface nxopen.cae.xyplot.WindowManager
Closes the window of specified device index.
closeWindow() - Method in interface nxopen.ListingWindow
Closes the listing window actually from the UI.
CLOSING - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ProcessType
The process of die travels from initial position to binder.
CLOSURE_WITH - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ProcessActionBinder
The process action for binder is closure with other draw components.
CLOSURE_WITH - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ProcessActionDie
The process action for die is closure with other draw components.
CLOSURE_WITH - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ProcessActionPunch
The process action for punch is closure with other draw components.
closureType() - Method in interface nxopen.features.sheetmetal.ClosedCornerBuilder
Returns the closure type
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
closureType - Variable in class nxopen.uf.UFNxsm.ClosedCornerData
CLOUD_OF_POINTS - Static variable in class nxopen.features.MidSurfaceByFacePairsBuilder.SurfaceType
Cloud of points
clrDist - Variable in class nxopen.uf.UFModl.SmjoggleData
clrDistBuilder() - Method in interface nxopen.cam.HoleMakingBuilder
Returns the Clearance Distance builder (inheritable double)
License requirements: None.
clrIndex - Variable in class nxopen.uf.UFCgm.Color
clrName - Variable in class nxopen.uf.UFCgm.Color
clrName - Variable in class nxopen.uf.UFDisp.AskColorData
CLRNR_NOT_PARALLEL_TAXIS - Static variable in class nxopen.cam.CAMObject.Attr
CLRPLANE_DEFINE_AND_ACTIVE - Static variable in class nxopen.uf.UFParam.ClrplaneStatus
CLRPLANE_DEFINE_AND_INACTIVE - Static variable in class nxopen.uf.UFParam.ClrplaneStatus
CLRPLANE_UNDEFINED - Static variable in class nxopen.uf.UFParam.ClrplaneStatus
CLRPLANE_USAGE_AT_END_MIN_CLEARANCE_AT_START - Static variable in class nxopen.uf.UFParam.ClrplaneUsage
CLRPLANE_USAGE_AT_OPERATION_END_ONLY - Static variable in class nxopen.uf.UFParam.ClrplaneUsage
CLRPLANE_USAGE_AT_OPERATION_START_AND_END - Static variable in class nxopen.uf.UFParam.ClrplaneUsage
CLRPLANE_USAGE_AT_OPERATION_START_ONLY - Static variable in class nxopen.uf.UFParam.ClrplaneUsage
CLRPLANE_USAGE_AT_START_MIN_CLEARANCE_AT_END - Static variable in class nxopen.uf.UFParam.ClrplaneUsage
clrPoint1 - Variable in class nxopen.uf.UFModl.SmjoggleData
clrPoint2 - Variable in class nxopen.uf.UFModl.SmjoggleData
clrSetName() - Method in interface nxopen.tooling.ValidCheckBuilder
Returns the clearance set name
License requirements: None.
clrVals - Variable in class nxopen.uf.UFCgm.Color
clrValues - Variable in class nxopen.uf.UFDisp.AskColorData
clrVertBuilder() - Method in interface nxopen.cam.HoleMakingBuilder
Returns the clearance vertical builder (inheritable double)
License requirements: None.
clrZone() - Method in interface nxopen.tooling.ValidCheckBuilder
Returns the clearance zone
License requirements: None.
clrZone - Variable in class nxopen.uf.UFClear.AskObjectClearZoneData
clrZone - Variable in class nxopen.uf.UFClear.AskPairClearZoneData
clsf() - Method in interface nxopen.UFSession
CLSF_DECIMAL_PLACE - Static variable in class nxopen.uf.UFCamPref.CamPref
clsfData() - Method in interface nxopen.PlotBuilder
Returns the option to plot clsf data.
clsfDecimalPlace - Variable in class nxopen.uf.UFCam.Preferences
clsfDecimals() - Method in interface nxopen.cam.Preferences
Returns the clsf_decimals
License requirements: None.
clsfForceLoadTurret() - Method in interface nxopen.cam.Preferences
Returns the force load turret
License requirements: None.
clsfReplayAdvanced - Variable in class nxopen.uf.UFCam.Preferences
clsfReplayRefresh - Variable in class nxopen.uf.UFCam.Preferences
clsfReplayVericut - Variable in class nxopen.uf.UFCam.Preferences
clsfType - Variable in class nxopen.uf.UFCam.Preferences
cluster - Variable in class nxopen.uf.UFCutter.TurnTrackingPointData
CLV_RANGE_AUTO_GENERATE - Static variable in class nxopen.uf.UFParam.ClvRangeType
CLV_RANGE_SINGLE - Static variable in class nxopen.uf.UFParam.ClvRangeType
CLV_RANGE_USER_DEFINED - Static variable in class nxopen.uf.UFParam.ClvRangeType
CLW - Static variable in class nxopen.cam.MillingToolBuilder.ToolDirectionTypes
CLW
CM - Static variable in class nxopen.cae.PreTestExportUnvBuilder.FileUnitsOption
CM: cm (centi newton)
CM - Static variable in class nxopen.HumanData.StatureUnitType
Indicate cm for stature
CMASS - Static variable in class nxopen.uf.UFSf.ElementType
CMETER - Static variable in class nxopen.uf.UFModl.Units
cmmInspectionGroupCollection() - Method in interface nxopen.cam.InspectionSetup
Returns the InspectionGroupCollection instance belonging to this setup .
cmmInspectionMoveCollection() - Method in interface nxopen.cam.InspectionOperation
Represents the Inspection Move Collection .
cmmInspectionMoveSubopCollection() - Method in interface nxopen.cam.InspectionMoveSubop
Represents the Inspection Move Collection .
cmmInspectionOperationCollection() - Method in interface nxopen.cam.InspectionSetup
Returns the InspectionOperationCollection instance belonging to this setup .
cmminspectionTrackPointCollection() - Method in interface nxopen.cam.InspectionTool
Returns the CMMInspectionTrackPointCollection .
CMOD_DATA_ERROR - Static variable in class nxopen.uf.UFConstants
CMP_COLOR_WIDTH - Static variable in class nxopen.uf.UFPlot.CmpColorWidth
CMP_DIFF_FOUND - Static variable in class nxopen.uf.UFPlot.DiffCmpStatus
CMP_NO_COLOR_WIDTH - Static variable in class nxopen.uf.UFPlot.CmpColorWidth
CMP_NO_DIFF_FOUND - Static variable in class nxopen.uf.UFPlot.DiffCmpStatus
CNC_TEMPLATE1 - Static variable in class nxopen.tooling.EWDraftingBuilder.CNCTemplateOption
template1
CNC_TEMPLATE2 - Static variable in class nxopen.tooling.EWDraftingBuilder.CNCTemplateOption
template2
cncOption() - Method in interface nxopen.tooling.EWDraftingBuilder
Returns the option to create cnc sheet type drafting or not.
cncTemplate() - Method in interface nxopen.tooling.EWDraftingBuilder
Returns the template of cnc sheet type to create drafting.
CO_ALIGN - Static variable in class nxopen.positioning.Constraint.Alignment
Directions are the same
COARSE - Static variable in class nxopen.cae.ModelDisplayBuilder.ElmDispQuality
Coarse
COARSE - Static variable in class nxopen.cam.Preferences.AnimationAccuracyTypes
Coarse
COARSE - Static variable in class nxopen.cam.SimulationOptionsBuilder.Accuracy
use coarse accuracy
COARSE - Static variable in class nxopen.die.CompensateRoughDataBuilder.ApproximationType
Perform a coarse approximation.
COARSE - Static variable in class nxopen.display.FacetSettingsBuilder.AdvVisToleranceSetting
COARSE - Static variable in class nxopen.display.FacetSettingsBuilder.ShadedToleranceSetting
COARSE - Static variable in class nxopen.drawings.ViewCreationWizardBuilder.ResolutionOption
view display quality Coarse
COARSE - Static variable in class nxopen.fields.DisplayPropertiesBuilder.DispResolutionEnum
COARSE - Static variable in class nxopen.geometricanalysis.HighlightLinesAnalysisBuilder.Resolutions
Coarse
COARSE - Static variable in class nxopen.ListCreator.ResolutionType
Coarse
COARSE - Static variable in class nxopen.preferences.GeneralToleranceOption
Coarse
COARSE - Static variable in class nxopen.preferences.GeneralViewQualityOption
Coarse
COARSE - Static variable in class nxopen.preferences.PartModeling.GridResolutionType
Coarse grid resolution
COARSE - Static variable in class nxopen.preferences.PartVisualizationShade.AdvViewToleranceType
Coarse
COARSE - Static variable in class nxopen.preferences.PartVisualizationShade.ShadedViewToleranceType
For Coarse: Facet Edge Tolerance is 0.01, Facet
Chord Tolerance is 0.01, and Angular Tolerance is 0.0
COARSE - Static variable in class nxopen.preferences.SessionModeling.PreviewResolutionType
COARSE - Static variable in class nxopen.preferences.SessionVisualizationHighQualityImage.PlotQualityType
COARSE - Static variable in class nxopen.preferences.ShadingToleranceOption
Coarse
COARSE - Static variable in class nxopen.STLImporter.AngularToleranceType
Import with coarse angular tolerance.
COARSE - Static variable in class nxopen.VRMLImporter.AngularToleranceType
Import with coarse angular tolerance.
COAX_HOLE_COUNT - Static variable in class nxopen.uf.UFGdt.ModifierTypes
Coaxial - Interface in nxopen.features
Represents a coaxial feature
To create or edit an instance of this class, use
CoaxialBuilder
Created in NX6.0.0
Returns a value that indicates whether coaxial relation recognition is enabled
License requirements: None.
COBALT_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
code - Variable in class nxopen.cam.CAMSetup.PartMaterialData
code - Variable in class nxopen.cam.FeatureGeomBuilder.MaterialData
code - Variable in class nxopen.cam.ToolBuilder.MaterialData
codecFourcc() - Method in interface nxopen.MovieSettingsBuilder
Returns the Codec that is used to create the movie.
CODESET_ASCII - Static variable in class nxopen.uf.UF.Codeset
CODESET_BIG5 - Static variable in class nxopen.uf.UF.Codeset
CODESET_EUC - Static variable in class nxopen.uf.UF.Codeset
CODESET_GB2312 - Static variable in class nxopen.uf.UF.Codeset
CODESET_ISO88591 - Static variable in class nxopen.uf.UF.Codeset
CODESET_ISO885915 - Static variable in class nxopen.uf.UF.Codeset
CODESET_ISO88592 - Static variable in class nxopen.uf.UF.Codeset
CODESET_ISO88594 - Static variable in class nxopen.uf.UF.Codeset
CODESET_ISO88595 - Static variable in class nxopen.uf.UF.Codeset
CODESET_ISO88596 - Static variable in class nxopen.uf.UF.Codeset
CODESET_ISO88597 - Static variable in class nxopen.uf.UF.Codeset
CODESET_ISO88598 - Static variable in class nxopen.uf.UF.Codeset
CODESET_KSC5601 - Static variable in class nxopen.uf.UF.Codeset
CODESET_NOT_INITIALIZED - Static variable in class nxopen.uf.UF.Codeset
CODESET_NOT_SUPPORT - Static variable in class nxopen.uf.UF.Codeset
CODESET_NT1250 - Static variable in class nxopen.uf.UF.Codeset
CODESET_NT1251 - Static variable in class nxopen.uf.UF.Codeset
CODESET_NT1252 - Static variable in class nxopen.uf.UF.Codeset
CODESET_NT1253 - Static variable in class nxopen.uf.UF.Codeset
CODESET_NT1254 - Static variable in class nxopen.uf.UF.Codeset
CODESET_NT1255 - Static variable in class nxopen.uf.UF.Codeset
CODESET_NT1256 - Static variable in class nxopen.uf.UF.Codeset
CODESET_NT1257 - Static variable in class nxopen.uf.UF.Codeset
CODESET_NT852 - Static variable in class nxopen.uf.UF.Codeset
CODESET_NT862 - Static variable in class nxopen.uf.UF.Codeset
CODESET_NT866 - Static variable in class nxopen.uf.UF.Codeset
CODESET_SJIS - Static variable in class nxopen.uf.UF.Codeset
CODESET_UTF8 - Static variable in class nxopen.uf.UF.Codeset
coefficient() - Method in interface nxopen.motion.DamperBuilder
COEFFICIENT_PER_LENGTH - Static variable in class nxopen.cae.Result.Quantity
coefficientCSYS() - Method in interface nxopen.features.GeneralConicBuilder
Returns the coefficient type coordinate system.
coefficientDefinitionMethod() - Method in interface nxopen.cae.responsesimulation.RSEventAttributes
Returns the DDAM coefficient definition method
License requirements: nx_response_anlys ("NX Response Analysis")
.
coefficientExpression() - Method in interface nxopen.motion.DamperBuilder
Returns the translational coefficient expression
License requirements: None.
coefficientExpression() - Method in interface nxopen.motion.SpringBuilder
Returns the translational coefficient expression
License requirements: None.
coefficientFile() - Method in interface nxopen.cae.responsesimulation.RSEventAttributes
Returns the DDAM coefficients definition file.
coefficientFunction() - Method in interface nxopen.motion.DamperBuilder
Returns the function tag.
coefficientFunction() - Method in interface nxopen.motion.SpringBuilder
Returns the function tag.
COEFFICIENTS - Static variable in class nxopen.features.GeneralConicBuilder.Types
COEFFICIENTS - Static variable in class nxopen.PlaneTypes.MethodType
Fixed plane defined by coefficients
coefficients - Variable in class nxopen.uf.UFCurve.Genconic
coefficientsType() - Method in interface nxopen.motion.BushingGeneralCoefficientsComponent
Returns the type will be constant or spline
License requirements: None.
coefficientType() - Method in interface nxopen.motion.DamperBuilder
Returns the coefficient type
License requirements: None.
coefficientType() - Method in interface nxopen.motion.SpringBuilder
Returns the coefficient type
License requirements: None.
COFM_MARKER - Static variable in class nxopen.uf.UFMotion.MarkerType
cofmError - Variable in class nxopen.uf.UFWeight.Properties
cofmState - Variable in class nxopen.uf.UFWeight.Properties
cogfrontXOffset() - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder
Returns the center of gravity front longitudunal offset for this head impact study.
cogfrontZOffset() - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder
Returns the center of gravity front vertical offset for this head impact study.
cogrearXOffset() - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder
Returns the center of gravity rear longitudunal offset for this head impact study.
cogrearZOffset() - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder
Returns the center of gravity rear vertical offset for this head impact study.
COHESIVE_ELEMENT - Static variable in class nxopen.cae.modelcheck.TestValueTypes.TestType
COIN_PUNCH - Static variable in class nxopen.uf.UFModl.PunchType
COINCIDENT - Static variable in class nxopen.DatumConstraint.Type
COINCIDENT - Static variable in class nxopen.features.DatumAxisBuilder.ConstraintType
Coincident constraint
COINCIDENT - Static variable in class nxopen.features.DatumPlaneBuilder.ConstraintType
Coincident constraint
coincident() - Method in interface nxopen.InferredConstraintsBuilder
Returns the coincident infer-constraint setting.
COINCIDENT - Static variable in class nxopen.PlaneTypes.MethodType
Plane of object method
COINCIDENT - Static variable in class nxopen.Sketch.ConstraintType
coincident() - Method in interface nxopen.SketchAutoConstrainBuilder
Returns the coincident
License requirements: None.
COINCIDENT - Static variable in class nxopen.SketchConstraintBuilder.Constraint
COINCIDENT - Static variable in class nxopen.uf.UFCurve.ConstraintType
COINCIDENT - Static variable in class nxopen.uf.UFModl.DfoConstraintType
COINCIDENT - Static variable in class nxopen.uf.UFSket.ConType
COINCIDENT_FACE_AXIS - Static variable in class nxopen.PlaneTypes.MethodType
Though face axis method
COINCIDENT_PERP_LINEAR - Static variable in class nxopen.PlaneTypes.MethodType
Through linear perpendicluar to linear method
COINCIDENT_POINT - Static variable in class nxopen.weld.WeldAdvisorCheckerType
Mimimum Distance
coincidentEdgeCollector() - Method in interface nxopen.features.FaceBlendBuilder
Returns the cliff edge collector for face blend
License requirements: None.
coincidentVertexEnabled() - Method in interface nxopen.features.CurveFinderBuilder
Returns a value that indicates whether add coincident vertex relation recognition for the last curves added to curve collector
License requirements: None.
col - Variable in class nxopen.uf.UFDraw.TabnotCell
colinearThreshold() - Method in interface nxopen.cae.FluidDomainBuilder
Returns the colinear decimation threshold
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")
.
COLL - Static variable in class nxopen.cam.LaserControlPoint.ControlPointTypes
coll
COLLABORATIVE_PRODUCT_DEVELOPMENT_DE - Static variable in class nxopen.Session.ProjectAssignmentObjectType
Collaborative Product Development -Design Element
CollaborativeContentManager - Interface in nxopen
Represents the manager for the various collaborative design contents and this class is usable only when NX is running in managed mode.
collaborativeContentManager() - Method in interface nxopen.Session
CollaborativeContentType - Class in nxopen.assemblies
Represents the collaborative content type corresponding to this component
collaborativeContentType() - Method in interface nxopen.assemblies.Component
Returns the collaborative content type of this component.
collaborativeDesign() - Method in interface nxopen.assemblies.PartitionScheme
Returns
the owning collaborative design.
collaborativeDesign() - Method in interface nxopen.assemblies.SubsetBuilder
CollaborativeDesign - Interface in nxopen
A collaborative design is created in Teamcenter.
collaborativeDesign() - Method in interface nxopen.pdm.ConfigurationContextBuilder
Returns the collaborative design
License requirements: nx_4gd_integration ("4th Generation Design")
.
CollaborativeDesignCollection - Interface in nxopen
A collection of collaborative designs.
collaborativeDesigns() - Method in interface nxopen.CollaborativeContentManager
COLLAPSE - Static variable in class nxopen.cae.SimBCDisplay.Mode
Set a collapsed display mode
collapseView() - Method in interface nxopen.uf.UFUiOnt
COLLAPSIBLE_GROUP - Static variable in class nxopen.uistyler.Dialog.ItemType
COLLAPSIBLE_GROUP - Static variable in class nxopen.uistyler.StylerItem.ItemType
Callapsible Group item
COLLAR_PLATE_TO_HOLE - Static variable in class nxopen.features.shipdesign.ExamineSteelFeatureBuilderCheck
Check collar plate to hole
COLLAR_PLATE_TO_SEAM - Static variable in class nxopen.features.shipdesign.ExamineSteelFeatureBuilderCheck
In basic design,check collar plate to seam,In detail design,check collar plate to edge
COLLECT_INSTANCES - Static variable in class nxopen.uf.UFCamPref.CamPref
collectEjectors(NXObject) - Method in interface nxopen.tooling.EjectorTableData
Collects ejectors into ejector table data.
collectInstances - Variable in class nxopen.uf.UFCam.Preferences
Collection - Interface in nxopen.assemblies.productinterface
This class represents the collection of product interface objects
To obtain an instance of this class, refer to
Part
Created in NX5.0.0
Represents a collection of user defined template
To obtain an instance of this class, refer to
Part
Created in NX10.0.0
Returns the selected objects for collection one.
collectionOneRange() - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder
Returns the range setting for collection one.
collectionTwoObjects() - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder
Returns the selected objects for collection two.
collectionTwoRange() - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder
Returns the range setting for collection two.
collector() - Method in interface nxopen.ExpressionCollectorSet
Returns the selection
License requirements: None.
collector - Variable in class nxopen.features.EdgeBlendBuilder.ChainsetAndStatusData
The collector for this edge blend chainset
collector - Variable in class nxopen.features.EdgeBlendBuilder.ChainsetData
The collector for this edge blend chainset
collectorName() - Method in interface nxopen.cae.ElementCreateBuilder
Returns the mesh collector name
License requirements: None.
collectorName() - Method in interface nxopen.cae.ElementExtrudeBuilder
Returns the mesh collector name
License requirements: None.
collectorName() - Method in interface nxopen.cae.ElementProjectBuilder
Returns the mesh collector name
License requirements: None.
collectorName() - Method in interface nxopen.cae.ElementReflectBuilder
Returns the mesh collector name
License requirements: None.
collectorName() - Method in interface nxopen.cae.ElementRevolveBuilder
Returns the mesh collector name
License requirements: None.
collectorName() - Method in interface nxopen.cae.MeshCollectorBuilder
Returns the collector name
License requirements: None.
collectorName() - Method in interface nxopen.cae.MeshFromBoundaryBuilder
Returns the mesh collector name
License requirements: None.
collectorName() - Method in interface nxopen.cae.SpiderElementBuilder
Returns the mesh collector name
License requirements: None.
collectorNeutralType() - Method in interface nxopen.cae.IMeshCollector
Returns the mesh collector neutral type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
collectors - Variable in class nxopen.features.MeshSurfaceBuilder.FaceConstraintCollectorsData
Constraints collectors.
collectorType() - Method in interface nxopen.cae.IMeshCollector
Returns the mesh collector type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
collectorUpdated() - Method in interface nxopen.SketchIntersectionCurveBuilder
This method needs to be called whenever the number of faces to intersect changes
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
COLLIMATED_ABSORBED_HEAT_FLUX - Static variable in class nxopen.cae.Result.Quantity
COLLIMATED_HEAT_FLUX - Static variable in class nxopen.cae.Result.Quantity
COLLIMATED_INCIDENT_HEAT_FLUX - Static variable in class nxopen.cae.Result.Quantity
COLLIMATED_REFLECTED_HEAT_FLUX - Static variable in class nxopen.cae.Result.Quantity
COLLIMATED_TRANSMITTED_HEAT_FLUX - Static variable in class nxopen.cae.Result.Quantity
collinear() - Method in interface nxopen.InferredConstraintsBuilder
Returns the collinear infer-constraint setting.
COLLINEAR - Static variable in class nxopen.Sketch.ConstraintType
collinear() - Method in interface nxopen.SketchAutoConstrainBuilder
Returns the collinear
License requirements: None.
COLLINEAR - Static variable in class nxopen.SketchConstraintBuilder.Constraint
COLLINEAR - Static variable in class nxopen.uf.UFSket.ConType
collinearEnabled() - Method in interface nxopen.features.CurveFinderBuilder
Returns a value that indicates whether add collinear relation recognition for the last curves added to curve collector
License requirements: None.
collinearTolerance() - Method in interface nxopen.cae.BoltBuilder
Returns the option to tune collinear tolerance for a model.
COLLISION - Static variable in class nxopen.cam.CutRegionsBuilder.CutRegionsStatusTypes
Collision
COLLISION - Static variable in class nxopen.sim.SimDebugBuilder.DumpType
Dump Collision
COLLISION - Static variable in class nxopen.sim.SimDebugBuilder.TraceType
Trace Collision
COLLISION_CHECK - Static variable in class nxopen.sim.KinematicSinumerikCaBuilder.PlcUsageTypes
Collision Check
collisionAvoidanceEnum() - Method in interface nxopen.cam.InspectionLinkPmiBuilder
Returns the collision avoidance enum
License requirements: None.
collisionBodies() - Method in interface nxopen.mechatronics.PhysicsManager
CollisionBody - Interface in nxopen.mechatronics
Represents the Collision Body class.
CollisionBodyBuilder - Interface in nxopen.mechatronics
CollisionBodyBuilder.CollisionShapeTypes - Class in nxopen.mechatronics
the collide shape types.
CollisionBodyBuilder.ShapePropertyTypes - Class in nxopen.mechatronics
the shape calculation option.
CollisionBodyCollection - Interface in nxopen.mechatronics
Represents a collection of Collision Bodies.
collisionCheck() - Method in interface nxopen.cam.HoleMachiningBuilder
Returns the collision check for cutting
License requirements: None.
collisionCheck() - Method in interface nxopen.cam.LaserProfileMove
Returns the Collision Check
License requirements: None.
collisionCheck() - Method in interface nxopen.cam.NcmHoleMachining
Returns the collision check activation
License requirements: None.
collisionCheck() - Method in interface nxopen.cam.NcmPlanarBuilder
Returns the collision check activation
License requirements: None.
collisionCheck() - Method in interface nxopen.cam.NcmScBuilder
Returns the collision check activation
License requirements: None.
collisionClearance() - Method in interface nxopen.cam.CollisionPairBuilder
Returns the collision clearance
License requirements: None.
collisionConfiguration() - Method in interface nxopen.tooling.RunSimulationBuilder
Modify the collision by invoking collision configuration dialog
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
CollisionConfigurationBuilder - Interface in nxopen.cam
collisionConfigurationBuilder() - Method in interface nxopen.cam.SimulationOptionsBuilder
Returns the collision configuration builder
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
collisionEnable() - Method in interface nxopen.cam.CollisionPairBuilder
Returns the collision enable
License requirements: None.
collisionFactor() - Method in interface nxopen.mechatronics.CollisionBodyBuilder
Returns the collision factor.
collisionFlag() - Method in interface nxopen.cam.ProbeProtectedParametersBuilder
Returns the collision flag
License requirements: None.
collisionInformation() - Method in interface nxopen.tooling.RunSimulationBuilder
List collision changes information in the information window
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
collisionMaterial() - Method in interface nxopen.mechatronics.ChangeMaterialBuilder
Returns the material.
collisionMaterial() - Method in interface nxopen.mechatronics.CollisionBodyBuilder
Returns the material.
CollisionMaterial - Interface in nxopen.mechatronics
Represents the Collision Material class.
CollisionMaterialBuilder - Interface in nxopen.mechatronics
CollisionMaterialCollection - Interface in nxopen.mechatronics
Represents a collection of Collision Material.
collisionMaterials() - Method in interface nxopen.mechatronics.PhysicsManager
CollisionPairBuilder - Interface in nxopen.cam
CollisionPairBuilder.Filter - Class in nxopen.cam
the collision selection filter value
CollisionPairBuilderList - Interface in nxopen.cam
Represents a list of objects.
collisionPrecision() - Method in interface nxopen.mechatronics.PreferencesBuilder
collisionPrecisionExpression() - Method in interface nxopen.mechatronics.PreferencesBuilder
Returns the Collision Precision Expression
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
collisionProperties() - Method in interface nxopen.mechatronics.CollisionBodyBuilder
Returns the shape option.
CollisionSensor - Interface in nxopen.mechatronics
Represents the Collision Sensor.
collisionSensor() - Method in interface nxopen.mechatronics.DisplayChangerBuilder
Returns the object select.
collisionSensor() - Method in interface nxopen.mechatronics.ObjectSinkBuilder
Returns the object select.
collisionSensor() - Method in interface nxopen.mechatronics.ObjectTransformerBuilder
Returns the object select.
CollisionSensorBuilder - Interface in nxopen.mechatronics
CollisionSensorBuilder.CollisionShapeTypes - Class in nxopen.mechatronics
the Trigger Shape Types.
CollisionSensorBuilder.ShapePropertiesOption - Class in nxopen.mechatronics
the Trigger Shape Option.
CollisionSensorCollection - Interface in nxopen.mechatronics
Represents a collection of Collision Sensor.
collisionSensors() - Method in interface nxopen.mechatronics.PhysicsManager
collisionShape() - Method in interface nxopen.mechatronics.CollisionBodyBuilder
Returns the shape type.
collisionShape() - Method in interface nxopen.mechatronics.CollisionSensorBuilder
Returns the collision shape type.
collshape() - Method in interface nxopen.cam.SimulationOptionsBuilder
Returns the tool shape for collision
License requirements: None.
color() - Method in interface nxopen.annotations.AutomaticCenterlineBuilder
Returns the color
License requirements: None.
color() - Method in interface nxopen.annotations.CenterlineSettingsBuilder
Returns the color of centerline
License requirements: None.
color() - Method in interface nxopen.annotations.CuttingPlaneSymbolBuilder
Returns the color of the Cutting Plane Symbol
License requirements: None.
color() - Method in interface nxopen.annotations.EditSymbolDisplayBuilder
Returns the color picker
License requirements: None.
color() - Method in interface nxopen.annotations.HatchBuilder
color() - Method in interface nxopen.annotations.HatchFillSettingsBuilder
Returns the color
License requirements: None.
color() - Method in interface nxopen.annotations.HatchStyleBuilder
Returns the color of crosshatch or area fill lines or area fill solid fill color
License requirements: None.
color() - Method in interface nxopen.annotations.IntersectionSymbolBuilder
Returns the color
License requirements: None.
color - Variable in class nxopen.annotations.LineCfw
color() - Method in interface nxopen.annotations.OffsetCenterPointBuilder
Returns the color
License requirements: None.
color() - Method in interface nxopen.annotations.TargetPointBuilder
Returns the color
License requirements: None.
color - Variable in class nxopen.annotations.TextCfw
color() - Method in interface nxopen.cae.LaminatePly
Returns the ply color
License requirements: None.
color() - Method in interface nxopen.cae.MeshCollectorDisplayDefaults
Returns the element color.
color() - Method in interface nxopen.cae.MeshDisplaySettings
Returns the element color.
color - Variable in class nxopen.cae.modelcheck.ElementEdgeCheckBuilder.EdgeDisplayStyle
line color
color - Variable in class nxopen.cae.Post.Text
color() - Method in interface nxopen.cae.xyplot.BaseLineStyleSetting
Returns the line color
License requirements: None.
color() - Method in interface nxopen.cae.xyplot.ScatterStyleSetting
Returns the point color
License requirements: None.
color() - Method in interface nxopen.cae.xyplot.TextBoxStyleSetting
Returns the text box outline color
License requirements: None.
color() - Method in interface nxopen.cae.xyplot.TextStyleSetting
Returns the text color
License requirements: None.
color - Variable in class nxopen.die.DrawDiePunchSectionBuilder.FormingAttributesData
Color of forming faces.
color - Variable in class nxopen.die.HoleChildBuilder.HoleAttributesData
Color of hole faces.
color - Variable in class nxopen.die.HoleChildBuilder.PadAttributesData
Color of pad faces.
color - Variable in class nxopen.die.HoleParentBuilder.HoleAttributesData
Color of hole faces.
color - Variable in class nxopen.die.HoleParentBuilder.PadAttributesData
Color of pad faces.
color - Variable in class nxopen.die.KeywayChildBuilder.SlotAttributesData
Color of slot faces.
color - Variable in class nxopen.die.KeywayParentBuilder.SlotAttributesData
Color of slot faces.
color - Variable in class nxopen.die.PadChildBuilder.HoleAttributesData
Color of hole faces.
color - Variable in class nxopen.die.PadChildBuilder.PadAttributesData
Color of pad faces.
color - Variable in class nxopen.die.PadParentBuilder.HoleAttributesData
Color of hole faces.
color - Variable in class nxopen.die.PadParentBuilder.PadAttributesData
Color of pad faces.
color - Variable in class nxopen.die.PierceHoleChildBuilder.HoleAttributesData
color of hole faces
color - Variable in class nxopen.die.PierceHoleParentBuilder.HoleAttributesData
color of hole faces
color - Variable in class nxopen.die.RotorSectionBuilder.RotorAttributesData
color of rotor faces
color - Variable in class nxopen.die.SteelInsertSectionBuilder.FormingAttributesData
color of forming faces
color - Variable in class nxopen.die.ThroatChildBuilder.ExtensionAttributesData
Color of extension faces.
color - Variable in class nxopen.die.ThroatParentBuilder.ExtensionAttributesData
Color of extension faces.
color - Variable in class nxopen.die.WearPlateLocChildBuilder.PadAttributesData
color of pad faces
color - Variable in class nxopen.die.WearPlateLocParentBuilder.PadAttributesData
color of pad faces
color() - Method in interface nxopen.display.SectionCurveSettingsBuilder
Returns the curve color.
color() - Method in interface nxopen.display.TransientText
Returns the index of the color to be used to display the transient text.
color() - Method in interface nxopen.DisplayableObject
Returns the color of the object.
color - Variable in class nxopen.DisplayManager.J3dMaterial
object color
color() - Method in interface nxopen.drawings.BrokenViewBuilder
Returns the break line color
License requirements: None.
color() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
Returns the color
License requirements: None.
color() - Method in interface nxopen.drawings.ViewStyleFPCurvesBuilder
Returns the color on the Curve section of the Flat Pattern tab of the View Style Dialog
License requirements: None.
color() - Method in interface nxopen.drawings.ViewStyleHiddenLinesBuilder
Returns the color on the HIDDEN LINES tab of the View Style Dialog
License requirements: None.
color() - Method in interface nxopen.drawings.ViewStyleSmoothEdgesBuilder
Returns the color on the SMOOTH EDGES tab of the View Style Dialog
License requirements: None.
color() - Method in interface nxopen.drawings.ViewStyleVirtualIntersectionsBuilder
Returns the color on the VIRTUAL INTERSECTIONS tab of the View Style Dialog
License requirements: None.
color() - Method in interface nxopen.features.ColorFaceBuilder
Returns the color.
color() - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder
color() - Method in interface nxopen.features.vehicledesign.BaseDataLoadingBuilder
Returns the color of loading.
color() - Method in interface nxopen.features.vehicledesign.PendulumPlacementBuilder
Returns the display color of this pendulum.
color() - Method in interface nxopen.mechatronics.DisplayChangerBuilder
Returns the initial color display property
License requirements: None.
color() - Method in interface nxopen.preferences.PartDrafting
Returns the color of the retained nxopen.annotations.Annotation objects.
color - Variable in class nxopen.preferences.PartFlexiblePrintedCircuitDesign.FlatPatternObjectTypeDisplay
Object color
COLOR - Static variable in class nxopen.preferences.PartObject.ColorSelection
User Defined Color
color - Variable in class nxopen.preferences.PartSheetmetal.FlatPatternObjectTypeDisplay
Object color
color - Variable in class nxopen.sheetmetal.FlatPatternSettings.FlatPatternObjectTypeDisplay
Object color
Color() - Constructor for class nxopen.uf.UFCgm.Color
Color(int, String, double[], int) - Constructor for class nxopen.uf.UFCgm.Color
color - Variable in class nxopen.uf.UFCgm.CustomWidths
color - Variable in class nxopen.uf.UFDisp.ConeheadAttrbSTag
color - Variable in class nxopen.uf.UFDisp.J3dEntity
color - Variable in class nxopen.uf.UFDisp.SystemParams
color - Variable in class nxopen.uf.UFDrf.AskRetainColorFontWidthData
color - Variable in class nxopen.uf.UFDrf.Cfw
color - Variable in class nxopen.uf.UFDrf.HatchFillPreferences
color - Variable in class nxopen.uf.UFDrf.TextCfw
color - Variable in class nxopen.uf.UFObj.CreSettings
color - Variable in class nxopen.uf.UFObj.DispProps
color - Variable in class nxopen.uf.UFSf.MeshVisuals
color - Variable in class nxopen.uf.UFView.VdeData
color - Variable in class nxopen.uf.UFView.VdeDataAndType
color() - Method in interface nxopen.visualreporting.GroupLabel
Returns the color of the
GroupLabel
License requirements: None.
Color Item
colorAndLayers() - Method in interface nxopen.Step203Creator
Returns the color and layers - if set to true then NX color and layers will be preserverd
License requirements: None.
colorApproach() - Method in interface nxopen.cam.InspectionMethodBuilder
Returns the color used for displaying approach elements
License requirements: None.
ColorAttr() - Constructor for class nxopen.uf.UFSf.ColorAttr
ColorAttr(int, double[], double) - Constructor for class nxopen.uf.UFSf.ColorAttr
colorAttr - Variable in class nxopen.uf.UFSfLegend.IndexAttr
Colorbar() - Constructor for class nxopen.cae.Post.Colorbar
Colorbar(Post.Spectrum, boolean, Post.Scale, int, Post.Threshold, double, double, boolean, boolean, NXColor, NXColor, Post.Position, Post.LimitDisplay, Post.LimitDisplay) - Constructor for class nxopen.cae.Post.Colorbar
Constructor for the Colorbar object.
COLORBAR_ONLY - Static variable in class nxopen.cae.Post.Legend
colorBodies() - Method in interface nxopen.routing.Stock
Colors the solid bodies of the stock based on the COLOR characteristic specified in the
StockData of the stock.
Returns the control color
License requirements: None.
ColorDefinition - Interface in nxopen
Represents a
ColorDefinition , which is a representation of one color
on an NX color palette.
Specifies rgb values for color
ColorDefinitionRgb() - Constructor for class nxopen.ColorDefinitionRgb
ColorDefinitionRgb(double, double, double) - Constructor for class nxopen.ColorDefinitionRgb
Constructor for the ColorDefinitionRgb object.
colorEntryExit() - Method in interface nxopen.cam.InspectionMethodBuilder
Returns the color used for displaying entry and exit elements
License requirements: None.
ColorFaceBuilder - Interface in nxopen.features
ColorHLS() - Constructor for class nxopen.preferences.ViewVisualizationSpecialEffects.ColorHLS
ColorHLS(double, double, double) - Constructor for class nxopen.preferences.ViewVisualizationSpecialEffects.ColorHLS
Constructor for the ColorHLS object.
ColorHSV() - Constructor for class nxopen.preferences.ViewVisualizationSpecialEffects.ColorHSV
ColorHSV(double, double, double) - Constructor for class nxopen.preferences.ViewVisualizationSpecialEffects.ColorHSV
Constructor for the ColorHSV object.
colorIndex() - Method in interface nxopen.ColorDefinition
Returns the color index.
colorLine() - Method in interface nxopen.cam.InspectionMethodBuilder
Returns the color used for displaying path lines
License requirements: None.
ColorManager - Interface in nxopen
Contains functionality pertaining to colors
To obtain an instance of this class, refer to
BasePart
Created in NX5.0.0
Color Map only
COLORMAP_AND_CONTOURS - Static variable in class nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder.DisplayTypes
Color Map and Contours
colorMeasurePoint() - Method in interface nxopen.cam.InspectionMethodBuilder
Returns the color used for displaying measured points
License requirements: None.
colorMode() - Method in interface nxopen.display.ImageBaseBuilder
Returns the color mode to display the image.
colorName() - Method in interface nxopen.ColorDefinition
Returns the color name.
colorName() - Method in interface nxopen.routing.electrical.ElectricalStockDevice
Returns the color name.
colorOption() - Method in interface nxopen.cae.xyplot.BarStyle3DSetting
Returns the filling color option
License requirements: None.
colorOption() - Method in interface nxopen.cae.xyplot.PlateStyle3DSetting
Returns the color option
License requirements: None.
colorOption() - Method in interface nxopen.cae.xyplot.SurfaceStyleSetting
Returns the color option
License requirements: None.
colorOption() - Method in interface nxopen.display.SectionCurveSettingsBuilder
Returns the curve color option
License requirements: None.
colorOption() - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder
Returns the color option of the current ship structure type.
colorPicker() - Method in interface nxopen.tooling.MWCopySheetsBuilder
Returns the color picker for selecting the color to be assigned to the new copied sheets
License requirements: None.
colorPlotType() - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
Returns the color plot type
License requirements: studio_free_form ("STUDIO FREE FORM")
.
colorRetract() - Method in interface nxopen.cam.InspectionMethodBuilder
Returns the color used for displaying retract elements
License requirements: None.
ColorRGB() - Constructor for class nxopen.preferences.ViewVisualizationSpecialEffects.ColorRGB
ColorRGB(double, double, double) - Constructor for class nxopen.preferences.ViewVisualizationSpecialEffects.ColorRGB
Constructor for the ColorRGB object.
colors() - Method in interface nxopen.BasePart
Manages the standard NX colors .
colors() - Method in interface nxopen.CGMBuilder
Returns the color option to be used when creating the CGM.
colors() - Method in interface nxopen.PlotColorsWidthsBuilder
Returns the color option to be used when plotting.
colors() - Method in interface nxopen.PrintPDFBuilder
Returns the color option to be used when creating the PDF document.
colors - Variable in class nxopen.uf.UFCgm.CustomColors
colors - Variable in class nxopen.uf.UFCgm.ExportOptions
colors - Variable in class nxopen.uf.UFPlot.JobOptions
COLORS_BY_WIDTH - Static variable in class nxopen.CGMBuilder.Color
Colors by Width, uses custom colors defined in CDF
COLORS_BY_WIDTH - Static variable in class nxopen.PlotColorsWidthsBuilder.Color
Colors by Width
COLORS_BY_WIDTH - Static variable in class nxopen.PrintPDFBuilder.Color
Part Colors
colorSaturation() - Method in interface nxopen.display.ImageBasedLighting
Returns the image-based lighting color saturation
License requirements: None.
colorSettingVisualization() - Method in interface nxopen.preferences.PartPreferences
Returns object for doing Visualization preferences settings for color setting tab applicable to displayed part .
colorSettingVisualization() - Method in interface nxopen.preferences.SessionPreferences
Returns object for doing Visualization preferences settings applicable to entire session .
colorsWidthsBuilder() - Method in interface nxopen.PlotBuilder
Returns the Colors Widths builder.
ColorTool - Interface in nxopen.uistyler
Represents a ColorTool for UI Styler.
ColorTool.ValueChanged - Interface in nxopen.uistyler
Called when a dialog user enters a valid color value.
colorTransition() - Method in interface nxopen.cam.InspectionMethodBuilder
Returns the color used for displaying transition elements
License requirements: None.
ColorValueData() - Constructor for class nxopen.tooling.EnlargeSurfaceBuilder.ColorValueData
ColorValueData() - Constructor for class nxopen.tooling.TrimRegionBuilder.ColorValueData
ColorWidth - Interface in nxopen
colorWidthOption - Variable in class nxopen.uf.UFPlot.UghpglCmpOptions
ColPrefs() - Constructor for class nxopen.uf.UFPlist.ColPrefs
ColPrefs(boolean, String, UFTabnot.CellPrefs, boolean) - Constructor for class nxopen.uf.UFPlist.ColPrefs
COLUMN - Static variable in class nxopen.geometricutilities.RectangularPattern.StaggerOptions
Stagger column
Column() - Constructor for class nxopen.preferences.RoutingPartLibrary.Column
Column(String, RoutingPartLibrary.ColumnStatus, RoutingPartLibrary.ColumnType) - Constructor for class nxopen.preferences.RoutingPartLibrary.Column
Constructor for the Column object.
COLUMN_TYPE_CALLOUT - Static variable in class nxopen.uf.UFPlist.ColumnType
COLUMN_TYPE_GENERAL - Static variable in class nxopen.uf.UFPlist.ColumnType
COLUMN_TYPE_QUANTITY - Static variable in class nxopen.uf.UFPlist.ColumnType
columnCount() - Method in interface nxopen.ITableEditorDataProvider
Returns the number of columns in the table
License requirements: None.
columnSortCallback(Tree, int, Node, Node) - Method in interface nxopen.blockstyler.Tree.ColumnSortCallback
Represents the callback which gets called when column sort is attempted.
columnWidth() - Method in interface nxopen.annotations.TableSectionBuilder
Returns the column width
License requirements: None.
COMAC - Static variable in class nxopen.cae.CorrelShapemetrictype
Shape metric type is Coordinate Modal Assurance Criteria
comacValues - Variable in class nxopen.cae.CorrelSolution.CalculateComacsData
comac values
ComacViewerBuilder - Interface in nxopen.cae
COMB - Static variable in class nxopen.geometricanalysis.CurveAnalysisDisplay.ShowFlagType
Deprecated.
show comb
COMB - Static variable in class nxopen.preferences.PartModeling.CurveCurvatureDisplayType
Curve curvature display is Curvature Comb
combDensity() - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord
combDensity - Variable in class nxopen.uf.UFCurve.AnalysisDisplay
CombinationEvaluationOptions - Interface in nxopen.cae.responsesimulation
Represents the setting for combination evaluation.
CombinationEvaluationOptions.EvaluationMethod - Class in nxopen.cae.responsesimulation
Specifies the calculation method of combination evaluation
CombinationEvaluationOptions.MultipleExcitationCombinationMethod - Class in nxopen.cae.responsesimulation
Specifies combination method for multiple excitation combination
combinationHoles() - Method in interface nxopen.annotations.HoleTableSettingsHoleFiltersBuilder
Returns the combination holes
License requirements: None.
combinationMethod() - Method in interface nxopen.cae.responsesimulation.CombinationEvaluationOptions
Returns the combination method for multiple excitation combination
License requirements: nx_response_anlys ("NX Response Analysis")
.
combinationOptions() - Method in interface nxopen.cae.responsesimulation.PeakValueEvaluationSettingBuilder
Returns the setting of combination evaluation.
combinationOptionsBuilder() - Method in interface nxopen.cae.responsesimulation.StrengthResultsEvaluationSettingBuilder
Returns the setting of combination evaluation
License requirements: nx_response_anlys ("NX Response Analysis")
.
combineAcross() - Method in interface nxopen.cae.ResultProbeBuilder
Returns the combine across
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
combineAcrossEntities() - Method in interface nxopen.cae.PostGraphAcrossIterationsBuilder
combineAcrossIteration() - Method in interface nxopen.cae.ResultProbeBuilder
Returns the combine geom
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
combineConnectedJoints() - Method in interface nxopen.weld.WeldJointBuilder
Returns the indication to combine connected joints if they belong to the same body
License requirements: None.
CombineCurvesDirection() - Constructor for class nxopen.uf.UFCurve.CombineCurvesDirection
CombineCurvesDirection(UFCurve.Direction, UFCurve.DirectionStructU) - Constructor for class nxopen.uf.UFCurve.CombineCurvesDirection
COMBINED_WORK_PIECE - Static variable in class nxopen.tooling.WorkpieceBuilder.Types
The new assembly of Mold wizard
CombinedProjection - Interface in nxopen.features
Represents a combined projection feature
To create or edit an instance of this class, use
CombinedProjectionBuilder
Created in NX6.0.0
Returns the combined value
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
CombineFacetBodyBuilder - Interface in nxopen.facet
combineIterOption() - Method in interface nxopen.cae.ResultProbeBuilder
Returns the combine option
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
combineLoadcases(SimPart, SimSolution, SimSolutionStep[], double[], String) - Method in interface nxopen.cae.SolutionResult
combineLoadcases(SimPart, SimResultReference, SimSolutionStep[], double[], String) - Method in interface nxopen.cae.SolutionResult
Combine the load cases
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
combineOption() - Method in interface nxopen.features.TrimAndExtendBuilder
Returns the combine option determines if two bodies that make a corner are combined into one body.
combineRibWithTarget() - Method in interface nxopen.features.RibBuilder
Returns the combine rib with target flag
License requirements: None.
CombineTrisBuilder - Interface in nxopen.cae
combineValueFromEntitiesOption() - Method in interface nxopen.cae.PostGraphAcrossIterationsBuilder
Returns the set combine across entities option type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
combInterneedleDensity() - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord
combInterneedleDensity - Variable in class nxopen.uf.UFCurve.AnalysisDisplay
combMaxLength() - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord
COMBO_BOX - Static variable in class nxopen.blockstyler.Tree.ControlType
Combo box.
COMBO_HOLES - Static variable in class nxopen.tooling.FaceColorManagementBuilder.HoleTypeEnumValue
combOptions() - Method in interface nxopen.geometricanalysis.CurveAnalysisCombsBuilder
combOptions() - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder
Returns the comb display block options
License requirements: None.
combOptions() - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder
Returns the comb options
License requirements: studio_analyze ("STUDIO ANALYZE")
.
combOptions() - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder
Returns the comb options specification
License requirements: None.
combOptions() - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder
Returns the comb display block options
License requirements: None.
combOptions() - Method in interface nxopen.geometricanalysis.SurfaceIntersectionBuilder
Returns the comb display block options
License requirements: None.
CombOptionsBuilder - Interface in nxopen.geometricutilities
CombOptionsBuilder.AnalysisTypes - Class in nxopen.geometricutilities
Represents the Analysis types
CombOptionsBuilder.LabelTypes - Class in nxopen.geometricutilities
Represents the Label types
combRange() - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder
Returns the comb range
License requirements: None.
combScaleFactor() - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord
COMM - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.DeviceTypeOptions
Use Comm
COMMA - Static variable in class nxopen.annotations.DecimalPointCharacter
Specifies comma decimal point character
COMMA - Static variable in class nxopen.annotations.TableCellStyleBuilder.CellFormatTypes
Comma
COMMA - Static variable in class nxopen.annotations.TableCellStyleBuilder.FormatType
Deprecated.
COMMA - Static variable in class nxopen.preferences.DecimalPointCharacter
,
commandType() - Method in interface nxopen.cam.InspectionCmmCommandBuilder
Returns the command type
License requirements: None.
commandUsed() - Method in interface nxopen.weld.WeldObjectBuilder
Returns the command name that was last used to create or modify features
License requirements: ugweld ("UG WELD")
.
commandUsed() - Method in interface nxopen.weld.WeldPointExitBuilder
Returns the command name that was last used to create features.
comment() - Method in interface nxopen.issue.IssueContent
Returns the issue comment
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.
comment() - Method in interface nxopen.issue.IssueContentBuilder
Returns the issue comment
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.
comment() - Method in interface nxopen.markup.MarkupObject
Returns the comment
License requirements: None.
comment - Variable in class nxopen.mechatronics.SignalAdapterBuilder.ParameterData
Comment Text
comment - Variable in class nxopen.mechatronics.SignalAdapterBuilder.SignalData
Comment Text
comment - Variable in class nxopen.uf.UFClone.AskCiCommentCheckingData
comment - Variable in class nxopen.uf.UFClone.AskDefCiCommentCheckingData
comment - Variable in class nxopen.uf.UFClone.CheckoutData
commit() - Method in interface nxopen.assemblies.SubsetConfigurationBuilder
Commit the subset configuration changes to the Assemblies.SubsetBuilder
License requirements: nx_4gd_integration ("4th Generation Design")
Created in NX8.5.0
commit() - Method in interface nxopen.Builder
Commits any edits that have been applied to the builder.
commit() - Method in interface nxopen.cam.SurfaceDriveGeometry
Commits any edits that have been applied to the builder.
commit() - Method in interface nxopen.drawings.DraftingView
Commits and applies all the settings like
ViewStyle to the View.This must be called on the view after creation or edit to reflect all the settings on it
License requirements: drafting ("DRAFTING")
Created in NX5.0.0
Commits and applies all the settings done with set_callout_type_display
and set_object_type_display.
commit(double, boolean, boolean, int) - Method in interface nxopen.drawings.ViewCopyTo3dBuilder
commit() - Method in interface nxopen.pdm.PartFromPartBuilder
Creates the new part that has been fully-specified by calling methods on this
builder.
commit() - Method in interface nxopen.pdm.PartFromTemplateBuilder
commit(boolean) - Method in interface nxopen.pdm.PartFromTemplateBuilder
commit() - Method in interface nxopen.preferences.FlatPatternViewPreferences
Commits and applies all the settings done with set_callout_type_display
and set_object_type_display.
commit() - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign
Commits and applies all the settings done with set_callout_type_display
and set_object_type_display.
commit() - Method in interface nxopen.preferences.PartSheetmetal
Commits and applies all the settings done with set_callout_type_display
and set_object_type_display.
commit() - Method in interface nxopen.tooling.CloneObject
Performs the clone operation.
commit() - Method in interface nxopen.validate.Parser
Runs parsing process
License requirements: None.
commit() - Method in interface nxopen.validate.Validator
Runs checking process and returns the checking status.
commitAddBc() - Method in interface nxopen.cae.SimBCBuilder
Commits the creation of the CAE.SimBC objects
or Commits the changes made to the CAE.SimBC and
adds the BC to the current active solution/step
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX6.0.0
commitAndDisplay(View, boolean) - Method in interface nxopen.display.ImageBasedLighting
Saves the attributes and optionally updates the display of image-based lighting
License requirements: None.
commitBc() - Method in interface nxopen.cae.SimBCBuilder
Commits the creation of the CAE.SimBC objects
or Commits the changes made to the CAE.SimBC
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX4.0.0
commitBolt() - Method in interface nxopen.cae.BoltBuilder
Commit the builder and create a bolt mesh
License requirements: nx_masterfem ("Finite Element Modeling")
.
commitChange() - Method in interface nxopen.cae.xyplot.IDisplayStyle
Commits any edits that have been applied to the display style.
commitClone() - Method in interface nxopen.pdm.CaeCloneManager
commitCreateOnTheFly() - Method in interface nxopen.features.CompositeCurveBuilder
Commits the feature and set create on the fly flag
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT")
.
commitCreateOnTheFly() - Method in interface nxopen.features.ExtractFaceBuilder
Commits the feature and set create on the fly flag
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT")
.
commitCreateOnTheFly() - Method in interface nxopen.features.WaveDatumBuilder
Commits the feature and set create on the fly flag
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT")
.
commitCreateOnTheFly() - Method in interface nxopen.features.WavePointBuilder
Commits the feature and set create on the fly flag
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
.
commitCreateOnTheFly() - Method in interface nxopen.features.WaveRoutingBuilder
Commits the feature and set create on the fly flag
License requirements: solid_modeling ("SOLIDS MODELING")
.
commitCreateOnTheFly() - Method in interface nxopen.features.WaveSketchBuilder
Commits the feature and set create on the fly flag
License requirements: solid_modeling ("SOLIDS MODELING")
.
commitCurrentEdit() - Method in interface nxopen.routing.EditBendAngleBuilder
Commits the current edit operation.
commitCurrentOperation() - Method in interface nxopen.formboard.ShapeSegmentBuilder
License requirements: routing_harness ("Routing Harness")
.
commitDensities() - Method in interface nxopen.cae.MeshControlBuilder
Commits the creation of the
MeshControl objects
or Commits the changes made to the
MeshControl
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX5.0.0
Commits the creation of the
DependentMesh objects
or Commits the changes made to the
DependentMesh
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX5.0.0
Clears the current drag network
License requirements: routing_base ("Routing Basic")
.
commitElements() - Method in interface nxopen.cae.MultipleElementCreateBuilder
Commits the Builder, which creates elements as they were defined and returns the newly create elements.
commitFaceSets() - Method in interface nxopen.weld.WeldPointBuilder
License requirements: ugweld ("UG WELD")
.
commitFluidDomain() - Method in interface nxopen.cae.FluidDomainBuilder
Commits the creation of the
FluidDomainRecipe objects
or Commits the changes made to the
FluidDomainRecipe
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")
Created in NX7.5.2
Commit mesh
License requirements: nx_masterfem ("Finite Element Modeling")
.
commitMesh() - Method in interface nxopen.cae.ElementModifyOrderBuilder
Commites the mesh.
commitMesh() - Method in interface nxopen.cae.Mesh0dBuilder
Commits the creation of the
Mesh0d
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX6.0.0
Commits the creation of the
CAE.Mesh0d ,
CAE.Mesh1d ,
CAE.Mesh2d ,
CAE.Mesh3d object
or Commits the changes made to the CAE.Mesh0d ,
CAE.Mesh1d ,
CAE.Mesh2d ,
CAE.Mesh3d object.
commitMesh() - Method in interface nxopen.cae.SurfaceCoatBuilder
Commit the mesh
License requirements: nx_masterfem ("Finite Element Modeling")
.
commitMmcs() - Method in interface nxopen.cae.MMCCreateBuilder
Commits the creation of the
MeshMate objects
or Commits the changes made to the
MeshMate
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX6.0.0
Commits the Builder, which creates the node as it was defined and returns the newly create node.
commitNodes() - Method in interface nxopen.cae.MultipleNodeCreateBuilder
Commits the Builder, which creates nodes as they were defined and returns the newly create nodes.
commitOffset(View) - Method in interface nxopen.display.Stage
Updates the data and display for a change to the stage's offset
License requirements: None.
commitOperation() - Method in interface nxopen.features.EmbeddedOperationBuilder
Commits the operation and creates the feature.
commitReferenceSheets(WeldOverlapStatus) - Method in interface nxopen.weld.WeldPointBuilder
The commit for reference sheets
License requirements: ugweld ("UG WELD")
.
commitResult() - Method in interface nxopen.cae.CompanionResultBuilder
Commits any edits that have been applied to the builder, This method must be used instead of commit
if you want to get the
CompanionResult returned.
Commit created section
License requirements: ugweld ("UG WELD")
.
commitWall(View, int, boolean) - Method in interface nxopen.display.Stage
Updates the data and display for a given wall
License requirements: None.
commitWithPartialMesh() - Method in interface nxopen.cae.Mesh3dTetBuilder
Commits the creation of the CAE.Mesh3d object
or Commits the changes made to the CAE.Mesh3d object
returns with partial meshes if 3d Tetrahedral meshing fails.
COMMON - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.VarScopes
Variable has common scope
common() - Method in interface nxopen.cam.PathDisplayColors
Returns the color common
License requirements: None.
COMMON_FRACTION - Static variable in class nxopen.drawings.ScaleValueFormatTypes
commonDepth() - Method in interface nxopen.cam.CutLevelPlanar
Returns the common depth
License requirements: None.
commonSlugHole() - Method in interface nxopen.die.PierceHoleParentBuilder
Returns the common slug hole switch of pierce holes
License requirements: ug_die_design ("Die Design")
.
commonWorkflow() - Method in interface nxopen.drafting.PreferencesBuilder
Returns the common workflow builder
License requirements: None.
CommonWorkflowBuilder - Interface in nxopen.annotations
commonZone() - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
Returns the common zone toggle
License requirements: None.
COMMPOUND - Static variable in class nxopen.mechatronics.GanttOperationBuilder.OperationType
Compound operation
comp() - Method in interface nxopen.cae.ResultVariable
Returns the Component
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
COMP - Static variable in class nxopen.routing.electrical.ElectricalStockDevice.RouteLevel
COMP_ALLEDGES - Static variable in class nxopen.uf.UFModl.CompareIdenticalfaceRule
COMP_COARSE - Static variable in class nxopen.uf.UFModl.CompareAccuracy
COMP_DEFAULT - Static variable in class nxopen.uf.UFModl.CompareAccuracy
COMP_ENT_CHANGED - Static variable in class nxopen.uf.UFModl.CompareEntityType
COMP_ENT_IDENTICAL - Static variable in class nxopen.uf.UFModl.CompareEntityType
COMP_ENT_NOT_COMPARED - Static variable in class nxopen.uf.UFModl.CompareEntityType
COMP_ENT_SUPPRESSED - Static variable in class nxopen.uf.UFModl.CompareEntityType
COMP_ENT_UNIQUE - Static variable in class nxopen.uf.UFModl.CompareEntityType
COMP_ENT_UNKNOWN - Static variable in class nxopen.uf.UFModl.CompareEntityType
COMP_FINE - Static variable in class nxopen.uf.UFModl.CompareAccuracy
COMP_GEOM - Static variable in class nxopen.uf.UFModl.CompareIdenticalfaceRule
COMP_GROUP_NOT_UPTODATE - Static variable in class nxopen.uf.UFWeight.ExceptionReason
COMP_GROUP_UPDATED_SUCCESSFULLY - Static variable in class nxopen.uf.UFWeight.ExceptionReason
COMP_NONE - Static variable in class nxopen.uf.UFModl.CompareIdenticalfaceRule
COMP_NONIDENTICALSF_CHANGED - Static variable in class nxopen.uf.UFModl.CompareChangeduniquefaceRule
COMP_NONIDENTICALSF_UNIQUE - Static variable in class nxopen.uf.UFModl.CompareChangeduniquefaceRule
COMP_ONLYEXTERNAL - Static variable in class nxopen.uf.UFModl.CompareIdenticalfaceRule
COMP_SET_ABSENT - Static variable in class nxopen.uf.UFWeight.ExceptionReason
COMP_SUPPRESSED - Static variable in class nxopen.assemblies.ClearanceAnalysisBuilder.PairExcludedReason
suppressed component
COMPANION - Static variable in class nxopen.cae.ResultsManipulationBuilder.OutputResultType
CompanionResult - Interface in nxopen.cae
Represents additional results data that will augment a primary set of Analysis results associated to a
SimSolution .
Companion result disposition indicates how the Companion result will be disposed of when primary result is deleted.
CompanionResultBuilder.ResultAppendMethod - Class in nxopen.cae
Companion results appending method which indicates how Companion results will be appended to the existing primary results.
CompanionResultCollection - Interface in nxopen.cae
companionResults() - Method in interface nxopen.cae.SimResultReference
Returns the CAE Companion Results collection belonging to this Result Reference .
companionResultsFile() - Method in interface nxopen.cae.CompanionResultBuilder
Returns the companion results file name.
company() - Method in interface nxopen.IgesCreator
Returns the company - company name
License requirements: None.
company() - Method in interface nxopen.Step203Creator
Returns the company
License requirements: None.
company() - Method in interface nxopen.Step214Creator
Returns the company
License requirements: None.
COMPANY_PROPRIETARY_INFO_TYPE - Static variable in class nxopen.uf.UFPd.AttributeType
companyName() - Method in interface nxopen.annotations.EnterpriseIdentificationBuilder
Returns the company name
License requirements: None.
CompanyProprietaryInformation - Interface in nxopen.annotations
CompanyProprietaryInformationBuilder - Interface in nxopen.annotations
compare(Tag, Tag, int) - Method in interface nxopen.uf.UFModeling
COMPARE_COMPLETED - Static variable in class nxopen.uf.UFConstants
COMPARE_CURVES_EQUIVALENT - Static variable in class nxopen.uf.UFConstants
COMPARE_CURVES_IDENTICAL - Static variable in class nxopen.uf.UFConstants
COMPARE_EDGES_EQUIVALENT - Static variable in class nxopen.uf.UFConstants
COMPARE_EDGES_IDENTICAL - Static variable in class nxopen.uf.UFConstants
COMPARE_FACES_EQUIVALENT - Static variable in class nxopen.uf.UFConstants
COMPARE_FACES_IDENTICAL - Static variable in class nxopen.uf.UFConstants
COMPARE_NOMATCH - Static variable in class nxopen.uf.UFConstants
COMPARE_OBJECT_NOT_ALIVE - Static variable in class nxopen.uf.UFConstants
COMPARE_SURFACES_EQUIVALENT - Static variable in class nxopen.uf.UFConstants
COMPARE_SURFACES_IDENTICAL - Static variable in class nxopen.uf.UFConstants
COMPARE_UNABLE_TO_FACET - Static variable in class nxopen.uf.UFConstants
COMPARE_UNSUITABLE_OBJECTS - Static variable in class nxopen.uf.UFConstants
compareDisplayFiles(String, String, Post.ASCIIDiffTolerances) - Method in interface nxopen.cae.Post
Utility to compare post ascii files
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
compareEmphasizeMode() - Method in interface nxopen.features.shipdesign.CompareModeBuilder
Returns the compare emphasize mode.
CompareEntityInfo() - Constructor for class nxopen.uf.UFModl.CompareEntityInfo
CompareEntityInfo(int, UFModl.CompareEntityMatch[]) - Constructor for class nxopen.uf.UFModl.CompareEntityInfo
CompareEntityMatch() - Constructor for class nxopen.uf.UFModl.CompareEntityMatch
CompareEntityMatch(Tag, Tag, UFModl.CompareEntityType, double, double) - Constructor for class nxopen.uf.UFModl.CompareEntityMatch
compareFeatAndExp - Variable in class nxopen.uf.UFModl.CompareOptions
CompareModeBuilder - Interface in nxopen.features.shipdesign
This class is used to compare between the two Shipbuilding modes of Design and Manufacturing.
CompareModeBuilder.CompareMode - Class in nxopen.features.shipdesign
Compare Mode type
compareObject() - Method in interface nxopen.features.shipdesign.FilterBuilder
Returns the object that is used to compare the property values with.
CompareOptions() - Constructor for class nxopen.uf.UFModl.CompareOptions
CompareOptions(int, double, UFModl.CompareAccuracy, boolean, UFModl.CompareIdenticalfaceRule, boolean, boolean) - Constructor for class nxopen.uf.UFModl.CompareOptions
ComparePartEntitiesData() - Constructor for class nxopen.uf.UFModl.ComparePartEntitiesData
ComparePartEntitiesData(UFModl.CompareEntityInfo, UFModl.CompareEntityInfo, UFModl.CompareEntityInfo, UFModl.CompareEntityInfo) - Constructor for class nxopen.uf.UFModl.ComparePartEntitiesData
ComparePartEntitiesData3() - Constructor for class nxopen.uf.UFModl.ComparePartEntitiesData3
ComparePartEntitiesData3(UFModl.CompareEntityInfo, UFModl.CompareEntityInfo, UFModl.CompareEntityInfo, UFModl.CompareEntityInfo) - Constructor for class nxopen.uf.UFModl.ComparePartEntitiesData3
ComparePartMapData() - Constructor for class nxopen.uf.UFModl.ComparePartMapData
ComparePartMapData(UFModl.ComparePartEntitiesData, UFModl.ComparePartEntitiesData, boolean) - Constructor for class nxopen.uf.UFModl.ComparePartMapData
ComparePartMapData3() - Constructor for class nxopen.uf.UFModl.ComparePartMapData3
ComparePartMapData3(UFModl.ComparePartEntitiesData3, UFModl.ComparePartEntitiesData3, boolean) - Constructor for class nxopen.uf.UFModl.ComparePartMapData3
CompareRunsBuilder - Interface in nxopen.routing
Represents a
CompareRunsBuilder , used to compare runs in the work
part to the ones in another part, or to runs defined in xml files gathered in a folder
(native mode) or on an item revision (managed mode).
The Compare Type selection Enum.
compareTestOutput(String, String) - Method in interface nxopen.BaseSession
compareTo(Object) - Method in class nxopen.Enum
Compares this enum with the specified object.
compareTolerance() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
Returns the compare tolerance
License requirements: None.
compareTopology(Tag, Tag, double, double) - Method in interface nxopen.uf.UFModeling
compareTypesEnum() - Method in interface nxopen.routing.CompareRunsBuilder
Returns the Compare type: part or xml
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
compareUghpglFiles(String, String, UFPlot.UghpglCmpOptions, String) - Method in interface nxopen.uf.UFPlot
compareXmlFiles(String, String, XmlComparator.Options) - Method in interface nxopen.validate.XmlComparator
Compares two xml format files.
COMPARING_DIFF_TYPES - Static variable in class nxopen.uf.UFConstants
ComparisonResult - Interface in nxopen.mechatronics
Represents comparison result .
ComparisonResult.Category - Class in nxopen.mechatronics
Defines categories of comparison results
ComparisonResultAttribute - Interface in nxopen.mechatronics
Represents attribute of comparison result .
ComparisonResultBase - Interface in nxopen.mechatronics
Represents base object of comparison result .
ComparisonResultContext - Interface in nxopen.mechatronics
Represents context of comparison results .
ComparisonResultContext.ResolveConflictAction - Class in nxopen.mechatronics
Defines actions for resolving conflicts
ComparisonResultElectricalPart - Interface in nxopen.mechatronics
Represents electrical part of comparison result .
ComparisonResultElectricalPart.AttributesData - Class in nxopen.mechatronics
ComparisonResultElectricalPart.Status - Class in nxopen.mechatronics
Defines statuses of electrical parts
comparisonStatus() - Method in interface nxopen.mechatronics.ComparisonResultElectricalPart
Returns the status from the electrical part
License requirements: None.
CompDrawingBuilder - Interface in nxopen.tooling
CompDrawingBuilder.ComponentTypeSelection - Class in nxopen.tooling
Specifies the type of components.
CompDrawingBuilder.DrawingType - Class in nxopen.tooling
Specifies the drawing type.
CompDrawingBuilder.FilterSelection - Class in nxopen.tooling
Specifies the filter of components.
CompDrawingBuilder.ProjectionType - Class in nxopen.tooling
Specifies the project type.
COMPENSATED - Static variable in class nxopen.die.SpringbackCompensationBuilder.ResultSheetType
Compensated sheet body.
compensateRoughData(CompensateRoughData) - Method in interface nxopen.die.DieCollection
CompensateRoughData - Interface in nxopen.features
Represents a compensate rough curve or compensate rough sheet feature
To create or edit an instance of this class, use
CompensateRoughDataBuilder
Created in NX6.0.0
Settings for the amount of approximation to perform.
CompensateRoughDataBuilder.Types - Class in nxopen.die
Settings for the type of data being compensated.
compensationNumber() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
Returns the compensation number
License requirements: None.
compensationType() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
Returns the compensation type
License requirements: None.
compFactor() - Method in interface nxopen.tooling.QuickQuotationBuilder
Returns the complexity factor.
compFunctions - Variable in class nxopen.uf.UFMotion.VectorForceTorque
complement - Variable in class nxopen.uf.UFCurve.LineArc
complementAngleFlag() - Method in interface nxopen.features.AngularDimBuilder
Returns the complement angle flag
License requirements: None.
complementArc() - Method in interface nxopen.features.CircularBlendCurveBuilder
Complements the circular blend curve
License requirements: solid_modeling ("SOLIDS MODELING")
.
complementArc() - Method in interface nxopen.geometricutilities.CurveLimitsData
Complements the arc
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE")
.
COMPLETE - Static variable in class nxopen.bodydes.OnestepUnformBuilder.UnfoldMode
Onestep unfold mode is complete
COMPLETE - Static variable in class nxopen.cam.CAMObject.Status
Object path has been output
COMPLETE - Static variable in class nxopen.preferences.SessionPdm.JtUpdateFromSourceType
COMPLETE - Static variable in class nxopen.preferences.SessionPdm.SynchroniseOnLoadType
COMPLETE - Static variable in class nxopen.preferences.SessionPdm.SynchroniseOnSaveType
COMPLETE_CHECK_AND_OUTPUT_ERRORS - Static variable in class nxopen.cae.SimSolution.SetupCheckOption
perform all set up checks and report all errors
completeStructure() - Method in interface nxopen.BasePart
Make additions necessary to complete the incomplete assembly structure of the input part
License requirements: None.
complex() - Method in interface nxopen.cae.BaseResultType
Returns a value indicating whether the result type is a complex value
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
complex - Variable in class nxopen.cae.Result.DeformationParameters
Deprecated.
complex - Variable in class nxopen.cae.Result.ResultParameters
Deprecated.
complex() - Method in interface nxopen.cae.ResultVariable
Returns the Complex type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
COMPLEX - Static variable in class nxopen.routing.AssignDiscontinuityBuilder.Types
COMPLEX - Static variable in class nxopen.weld.WeldGrooveBuilder.Prepare
Complex
COMPLEX - Static variable in class nxopen.weld.WeldPrepareEdges
Same as entire edge, but use if a portion of target body is below the desired weld
COMPLEX_ELONGATED_HOLE_FEATURE - Static variable in class nxopen.uf.UFGdt.FeatureType
COMPLEX_MAGNITUDE_PHASE - Static variable in class nxopen.fields.FieldVariable.ValueType
complex_magnitude_phase
COMPLEX_REAL_IMAGINARY - Static variable in class nxopen.fields.FieldVariable.ValueType
complex_real_imaginary
COMPLEX_TRANSFORM - Static variable in class nxopen.cae.PreTestSolutionBuilder.ModeConversionType
All sensors must be triax
complexCriterion() - Method in interface nxopen.cae.DeformationParameters
Returns the complexity criterion.
ComplexData() - Constructor for class nxopen.cae.AfuData.ComplexData
ComplexData() - Constructor for class nxopen.cae.ftk.ArrayRecord2D.ComplexData
COMPLEXEIGEN - Static variable in class nxopen.cae.Result.SolutionType
Complex Eigen
complexGraphTypes() - Method in interface nxopen.cae.PostGraphBuilder
Returns the complex plot display option while plotting complex result type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
complexOption() - Method in interface nxopen.cae.xyplot.GeneralDisplayStyles2D
Returns the complex option
License requirements: None.
complexOption() - Method in interface nxopen.cae.xyplot.GeneralDisplayStyles3D
Returns the complex option
License requirements: None.
complexOption() - Method in interface nxopen.cae.xyplot.Template2D
complexOption() - Method in interface nxopen.cae.xyplot.Template3D
ComplexOption2D - Class in nxopen.cae.xyplot
Represents the 2D plot complex option
ComplexOption3D - Class in nxopen.cae.xyplot
Represents the 3D plot complex option
complexPoint() - Method in interface nxopen.routing.AssignDiscontinuityBuilder
Returns the Rcp type of the selected object
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
ComplexSectionBasedMatrixRecord - Interface in nxopen.cae.ftk
Represents a section based matrix record which has complex data values.
ComplexSectionBasedMatrixRecord.SectionData - Class in nxopen.cae.ftk
complexSubFeatures - Variable in class nxopen.uf.UFGdt.AskComplexSubFeaturesData
compNames - Variable in class nxopen.uf.UFWeight.Exceptions
Component - Interface in nxopen.assemblies
component - Variable in class nxopen.assemblies.ComponentAssembly.AddComponentData
The new Component
component() - Method in interface nxopen.cae.DeformationParameters
Returns the result component that is used for deforming the model.
COMPONENT - Static variable in class nxopen.cae.ElementTranslateBuilder.MethodType
translate by components
COMPONENT - Static variable in class nxopen.cae.responsesimulation.SensorType
component - Variable in class nxopen.cae.Result.ResultParameters
Deprecated.
COMPONENT - Static variable in class nxopen.cam.CollisionPairBuilder.Filter
component filter
COMPONENT - Static variable in class nxopen.cam.ProbeControlParametersBuilder.PrintType
Increment component
component() - Method in interface nxopen.features.shipdesign.ManufacturingOutBuilder
Returns the component to validate
License requirements: None.
COMPONENT - Static variable in class nxopen.features.shipdesign.ShipCoordinatesBuilder.Selection
Allows routing component selection.
component() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
Returns the list of the components to check interference with the impact sheets.
COMPONENT - Static variable in class nxopen.formboard.UpdateDiscrepancy.ObjectType
A component assigned as a
electrical connector or device.
Component - Interface in nxopen.layout2d
Represents the Component object.
COMPONENT - Static variable in class nxopen.layout2d.Layout2dComponentMemberType
component() - Method in interface nxopen.layout2d.MakeComponentUniqueBuilder
Returns the select 2D Comoponent instance to create definition
License requirements: None.
component() - Method in interface nxopen.mechatronics.ChangeOwnerBuilder
Returns the component which is expected to be the owner of physics objects.
component() - Method in interface nxopen.motion.GraphBuilder
Returns the component
License requirements: mechanisms ("MECHANISMS")
.
COMPONENT - Static variable in class nxopen.motion.LinkInitialVelocity.AngularVelocityType
Component type define rotate csys
component - Variable in class nxopen.pdm.PendingComponentsManager.AddComponentData
component() - Method in interface nxopen.tooling.CompDrawingBuilder
Returns the component to create drawing.
component() - Method in interface nxopen.tooling.ElectrodeDeleteBuilder
Returns the utility to get component to delete.
COMPONENT - Static variable in class nxopen.tooling.ElectrodeDeleteBuilder.Types
Delete electrode, holder and pallet.
component() - Method in interface nxopen.tooling.MotionSimulationBuilder
Returns the component to assign die components mounted to a kinematic component.
COMPONENT - Static variable in class nxopen.tooling.ObjectAttributeManagementBuilder.FilterAccordingToAttributeType
COMPONENT - Static variable in class nxopen.tooling.ObjectAttributeManagementBuilder.FilterType
COMPONENT - Static variable in class nxopen.tooling.ValidCheckBuilder.SelMode
Selection type will be set to component
Component.AnchorPointData - Class in nxopen.layout2d
Component.PositionData - Class in nxopen.assemblies
Component.RealQuantityData - Class in nxopen.assemblies
Component.RepresentationMode - Class in nxopen.assemblies
Representation status of a component
Component.TransformData - Class in nxopen.layout2d
component2dCollection() - Method in interface nxopen.Part
Returns the ComponentCollection instance belonging to this part .
component2dSettings() - Method in interface nxopen.drafting.PreferencesBuilder
Returns the 2d component settings block builder, this builder stores the settings of the 2d component
License requirements: None.
COMPONENT_ADDED_DATE_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
Component Added Date
COMPONENT_AS_PART_ATTRIBUTE - Static variable in class nxopen.AttributePropertiesBaseBuilder.ObjectOptions
Deprecated.
Apply attribute to the component as a part attribute
COMPONENT_GROUP_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
Component group name
COMPONENT_GROUPS_LOAD_OPTIONS - Static variable in class nxopen.BasePart.BookmarkOption
Write component groups and load options.
COMPONENT_GROUPS_LOAD_OPTIONS_PLUS_DISPLAY - Static variable in class nxopen.BasePart.BookmarkOption
Write component groups, load options and display attributes
COMPONENT_GROUPS_ONLY - Static variable in class nxopen.BasePart.BookmarkOption
Write component groups only.
COMPONENT_GROUPS_ONLY_PLUS_DISPLAY - Static variable in class nxopen.BasePart.BookmarkOption
Write component groups and display attributes
COMPONENT_INSTANCE - Static variable in class nxopen.AttributePropertiesBaseBuilder.ObjectOptions
Deprecated.
Apply attribute to the instance of the component.
COMPONENT_INSTANCE - Static variable in class nxopen.AttributeTemplatesBuilder.AccessKey
This attribute template will be accessible by component instances
COMPONENT_NAME - Static variable in class nxopen.preferences.RoutingElectrical.ComponentMatchType
Match component name during component assignment.
COMPONENT_NAME_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
Component name
COMPONENT_OCCURRENCE - Static variable in class nxopen.AttributeTemplatesBuilder.AccessKey
This attribute template will be accessible by component occurrences
COMPONENT_ONLY - Static variable in class nxopen.assemblies.ComponentAssembly.OpenOption
Open the component but none of its children
COMPONENT_PARENT - Static variable in class nxopen.cam.CollisionPairBuilder.Filter
component parent filter
COMPONENT_PATTERN_TYPE_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
Component Pattern Type property
COMPONENT_POSITION - Static variable in class nxopen.motion.FlexBodyBuilder.Positioning
Positioning to the place where the component is in assembly
COMPONENT_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
Assembly Navigator column property
ComponentAssembly - Interface in nxopen.assemblies
Represents the set of
Component s that make up an
assembly.
Returns the component assembly.
ComponentAssembly.AddComponentData - Class in nxopen.assemblies
ComponentAssembly.CheckedoutStatusOfObjectsData - Class in nxopen.assemblies
ComponentAssembly.CheckinCheckoutOption - Class in nxopen.assemblies
Check in and Check out options for components
ComponentAssembly.CheckoutAllModifiedObjectsData - Class in nxopen.assemblies
ComponentAssembly.CloseModified - Class in nxopen.assemblies
Indicates how close component should handle component parts when they are modified
ComponentAssembly.OpenComponentsData - Class in nxopen.assemblies
ComponentAssembly.OpenComponentStatus - Class in nxopen.assemblies
Open Component Status
ComponentAssembly.OpenOption - Class in nxopen.assemblies
Open options for open_components
ComponentAssembly.OrderTargetLocation - Class in nxopen.assemblies
Option controls whether reordered
Component s are placed
before or after the target
ComponentDefines how a component substitution operation is performed.
ComponentAssembly.SuppressedState - Class in nxopen.assemblies
Defines the component supression states.
ComponentAssembly.SuppressedStateData - Class in nxopen.assemblies
componentCam() - Method in interface nxopen.assemblies.CreateNewComponentBuilder
Returns the cam component cam type
License requirements: None.
ComponentCollection - Interface in nxopen.layout2d
componentCollection() - Method in interface nxopen.sim.KinematicConfigurator
Returns the ComponentCollection instance belonging to this SimKim .
ComponentConstraint - Interface in nxopen.positioning
Constraint for use in positioning assembly objects in NX.
ComponentConstraint.DirectionToFixed - Class in nxopen.positioning
Specifies how a constraint affects the positioning of a component.
ComponentData - Interface in nxopen.annotations
A ComponentData object can be used to query the components of an annotation.
ComponentDefinition - Interface in nxopen.layout2d
Represents a component definition.
ComponentDefinitionCollection - Interface in nxopen.layout2d
componentDefinitions() - Method in interface nxopen.Part
Returns the ComponentDefinitionCollection instance belonging to this part .
componentFeature() - Method in interface nxopen.features.UserDefinedFeatureUpdateEvent
Returns the component feature being updated
License requirements: None.
componentGroups() - Method in interface nxopen.Part
Returns the collection of ComponentGroups for this part .
componentHasBIPGeometry(Component) - Method in interface nxopen.routing.RouteManager
Determines whether or not a built-in path component has proper work part geometry.
componentHasPosition(String) - Method in interface nxopen.pdm.PendingComponentsManager
Determines whether a given pending component has been positioned
by Teamcenter.
componentIndex - Variable in class nxopen.motion.GraphBuilder.CurveData
Attribute component choice
componentInWorkset() - Method in interface nxopen.assemblies.Subset
componentLayer() - Method in interface nxopen.assemblies.ReplaceComponentBuilder
Returns the layer for the new replacement part.
componentLayerOptionType() - Method in interface nxopen.assemblies.ReplaceComponentBuilder
Returns the layer options
License requirements: None.
componentLimitingSize() - Method in interface nxopen.cae.optimization.TBSSmoothBuilder
Returns the limiting size that defines the minimal allowed relative size of a connected component.
componentLoadMethod() - Method in interface nxopen.LoadOptions
Returns the option indicating what method to use to determine where to
find component parts to load
License requirements: None.
componentMatchMethod() - Method in interface nxopen.preferences.RoutingElectrical
Returns the component match option for automatic/manual component assignment.
componentMemberSelect() - Method in interface nxopen.preferences.SessionAssemblies
Returns the component member select option
License requirements: None.
componentName() - Method in interface nxopen.assemblies.ReplaceComponentBuilder
Returns the component name
License requirements: None.
componentName() - Method in interface nxopen.layout2d.DefineComponentBuilder
Returns the 2D Component Name defines the name for the new created definition
License requirements: None.
componentName() - Method in interface nxopen.layout2d.MakeComponentUniqueBuilder
Returns the 2D Component Name defines the name for the new created definition
License requirements: None.
ComponentName - Class in nxopen.routing
Describes whether or not a component associated with a Stock as Compoents Stock has
been renamed by the user with a permanent name using the ???
componentName() - Method in interface nxopen.routing.electrical.ConnectorDevice
Returns the component name.
ComponentNameBuilder - Interface in nxopen.layout2d
This class is used to construct the component name and part file name block, if it is in
manage mode, we also have item number, item revision and item name .
componentNames - Variable in class nxopen.uf.UFAssem.UpgradeStatus
componentNameType() - Method in interface nxopen.assemblies.ReplaceComponentBuilder
Returns the component name options
License requirements: None.
ComponentNetwork - Interface in nxopen.positioning
Network for use in positioning components in NX.
ComponentNetwork.ArrangementsMode - Class in nxopen.positioning
Specifies how changes in the network are applied to arrangements.
ComponentOrder - Interface in nxopen.assemblies
componentOrigin() - Method in interface nxopen.assemblies.CreateNewComponentBuilder
Returns the component origin
License requirements: None.
ComponentPattern - Interface in nxopen.assemblies
Represents the component pattern class.
ComponentPatternBuilder - Interface in nxopen.assemblies
ComponentPatternCollection - Interface in nxopen.assemblies
Represents the collection object for all component patterns.
componentPatterns() - Method in interface nxopen.assemblies.ComponentAssembly
The collection of
ComponentPattern defined in the ComponentAssembly
Created in NX9.0.0
An instance of this class can be used to create
Constraint s and
associated objects.
Represents the component quantity type of the component
componentreferenceset - Variable in class nxopen.assemblies.ReplaceComponentBuilder.ComponentReferenceSetTypeData
ComponentReferenceSetTypeData() - Constructor for class nxopen.assemblies.ReplaceComponentBuilder.ComponentReferenceSetTypeData
components() - Method in interface nxopen.annotations.DefineTitleBlockBuilder
Returns the components, i.e. tags of selected entities such as tabular notes
License requirements: None.
COMPONENTS - Static variable in class nxopen.assemblies.ClearanceAnalysisBuilder.ClearanceBetweenEntity
components() - Method in interface nxopen.assemblies.HideComponentBuilder
Returns the components to hide
License requirements: None.
components() - Method in interface nxopen.assemblies.ShowComponentBuilder
Returns the components to show
License requirements: None.
COMPONENTS - Static variable in class nxopen.blockstyler.SelectObject.FilterType
Filter to select all components
components - Variable in class nxopen.cae.BaseResultType.AskComponentsData
COMPONENTS - Static variable in class nxopen.cae.FreeBodyResultsBuilder.VectorDisplay
display individual components
components - Variable in class nxopen.cae.ResultAccess.AskResultComponentsData
COMPONENTS - Static variable in class nxopen.DisplayManager.ShowHideType
Show or hide components
components() - Method in interface nxopen.layout2d.ReplaceComponentBuilder
Returns the select 2D Components to replace the definitions
License requirements: None.
components() - Method in interface nxopen.layout2d.SmashComponentBuilder
Returns the select 2D Component instances to smash
License requirements: None.
COMPONENTS - Static variable in class nxopen.PartCleanup.CleanupParts
clean up the work part and
its components
COMPONENTS - Static variable in class nxopen.routing.electrical.ElectricalFormat.Type
components - Variable in class nxopen.uf.UFAssem.AskHiddenCompsData
components - Variable in class nxopen.uf.UFAssem.AskIsetArrayData
components - Variable in class nxopen.uf.UFAssem.AskMcArrayData
components(double[], double[], double[], double) - Method in interface nxopen.uf.UFVec2
COMPONENTS2D - Static variable in class nxopen.DisplayManager.ShowHideType
Show or hide 2d components
componentsCreation() - Method in interface nxopen.features.DatumCsysBuilder
ComponentsData() - Constructor for class nxopen.uf.UFVec2.ComponentsData
componentSelection() - Method in interface nxopen.cam.InspectionAlignmentBuilder
Returns the component selection
License requirements: None.
componentSelection() - Method in interface nxopen.cam.InspectionLinkPmiBuilder
Returns the component selector
License requirements: None.
componentSelection() - Method in interface nxopen.features.shipdesign.RemoveSplitBuilder
Returns the components, which has the split feature, to be removed.
componentSelectionList() - Method in interface nxopen.assemblies.CreateOverridePartBuilder
Returns the list that contains components of reuse design element or subordinates
in which to create an empty override part.
componentSelectionList() - Method in interface nxopen.assemblies.DeleteOverridePartBuilder
Returns the list that contains components of reuse design element or subordinates
of which override part is to be deleted.
componentSettings() - Method in interface nxopen.layout2d.ComponentSettingsBlockBuilder
Returns the Component settings builder which stores the component settings
License requirements: None.
componentSettings() - Method in interface nxopen.layout2d.EditComponentSettingsBuilder
Returns the 2D Component settings block builder which holds the component settings builder
License requirements: None.
ComponentSettingsBlockBuilder - Interface in nxopen.layout2d
Represents the Component Settings Button (Layout2d.ComponentSettingsBlockBuilder)
Created in NX10.0.0
ComponentSettingsBuilder - Interface in nxopen.layout2d
Represents a
ComponentSettingsBuilder
This builder stores the information of the 2D Component settings
Created in NX10.0.0
New component loaded flag
componentsLoadOption - Variable in class nxopen.LoadOptions.BookmarkComponentsToLoadData
what components to load
componentsToCopy() - Method in interface nxopen.features.shipdesign.CopyPasteNewBuilder
Returns the components to copy
License requirements: nx_ship_detail ("Ship Detail Design")
.
componentsToJoin() - Method in interface nxopen.weld.AutoPointBuilder
Returns the components that should be welded together.
componentsToLoad() - Method in interface nxopen.LoadOptions
Returns the option indicating what component parts to load during part open.
componentsToReplace() - Method in interface nxopen.assemblies.ReplaceComponentBuilder
Returns the objects to be replaced.
componentsTreatAsUnit() - Method in interface nxopen.weld.AutoPointBuilder
Returns the components to treat as unit.
componenttype - Variable in class nxopen.cae.responsesimulation.CSDExcitationBuilder.CSDFunction
componentType() - Method in interface nxopen.motion.MotionSensorBuilder
Returns the component type
License requirements: None.
componentType() - Method in interface nxopen.tooling.CompDrawingBuilder
Returns the component type in mold or die project assembly.
compOrigin() - Method in interface nxopen.formboard.ObjectAttributeReferenceBuilder
Returns the comp origin
License requirements: routing_harness ("Routing Harness")
.
composeHandle(String, int, int) - Method in interface nxopen.uf.UFTag
COMPOSITE_CURVE - Static variable in class nxopen.features.PartGeometryCopyBuilder.Type
An option to composite a curve via curve selection intent
COMPOSITE_FACE - Static variable in class nxopen.features.PartGeometryCopyBuilder.Type
An option to composite a body via face selection intent
COMPOSITE_FRAME - Static variable in class nxopen.annotations.FeatureControlFrameBuilder.FcfFrameStyle
composite frame
COMPOSITE_FRAME - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.FrameStyleOptions
composite frame
COMPOSITE_GEOM - Static variable in class nxopen.uf.UFBrep.GeomType
CompositeBlock - Interface in nxopen.blockstyler
A composite block is a block that contains other blocks .
CompositeCurve - Interface in nxopen.features
Represents a composite curve feature
To create or edit an instance of this class, use
CompositeCurveBuilder
Created in NX5.0.0
Returns the composite curve
License requirements: None.
CompositeCurveBuilder - Interface in nxopen.features
compositeCurveBuilder() - Method in interface nxopen.features.WaveLinkBuilder
Returns the composite curve builder
License requirements: None.
CompositeCurveBuilder.JoinMethod - Class in nxopen.features
the join method
CompositeCurveBuilder.PartType - Class in nxopen.features
Composite Curve part type.
CompositeCurveBuilder.WaveLinkInformationData - Class in nxopen.features
compositeFace() - Method in interface nxopen.features.PartGeometryCopySelectBuilder
Returns the composite face
License requirements: None.
compositeInsert() - Method in interface nxopen.tooling.BendInsertDesignBuilder
Returns the composite insert.
compositeToleranceValueSource() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
Returns the GDT Composite Lower Tolerance Value Source
License requirements: None.
COMPOUND - Static variable in class nxopen.weld.WeldObjectBuilder.CommandName
Compound Weld command
COMPOUND_DIE - Static variable in class nxopen.tooling.DieBaseBuilder.DieBaseTypeOpt
compound die type
CompoundDatumReferenceBuilder - Interface in nxopen.annotations
CompoundWeld - Interface in nxopen.weld
Represents a compound weld feature.
CompoundWeldBuilder - Interface in nxopen.weld
compoundWeldSize() - Method in interface nxopen.annotations.LineWeldDataBuilder
Returns the compound weld size
License requirements: None.
compoundWeldSizeCode() - Method in interface nxopen.annotations.LineWeldDataBuilder
Returns the compound weld size letter code
License requirements: None.
COMPRESSED_TIFF - Static variable in class nxopen.uf.UFDisp.ImageFormat
compressFace() - Method in interface nxopen.weld.Extract
Compresses the size of weld linked face objects.
CompressFlags() - Constructor for class nxopen.uf.UFPart.CompressFlags
CompressFlags(boolean) - Constructor for class nxopen.uf.UFPart.CompressFlags
COMPRESSION_SAFETY_FACTOR - Static variable in class nxopen.cae.Result.Quantity
compressionSpringConstant(double, double, double) - Method in interface nxopen.EngineeringFunction
Calculate the spring constant for a compression spring that exerts a force
when deformed to the length.
compressionSpringConstantFromParam(double, double, double, double) - Method in interface nxopen.EngineeringFunction
Calculate the spring constant k for a compression spring from design parameters.
compressionSpringDeformedLength(double, double, double) - Method in interface nxopen.EngineeringFunction
Calculate the deformed length of a compression spring (with a known spring constant)
when loaded with a force.
compressionSpringForce(double, double, double) - Method in interface nxopen.EngineeringFunction
Calculate the force exerted by a compression spring (with a known spring constant)
when given the spring length before and after loading
License requirements: None.
compressionSpringShearStressMaximum(double, double, double) - Method in interface nxopen.EngineeringFunction
Calculate the maximum shear stress in the spring from the provided spring geometry.
compressPart() - Method in interface nxopen.PartSaveOptions
Returns the option indicating whether solid data within part files
will be compressed as it is saved to disk
License requirements: None.
comps - Variable in class nxopen.uf.UFRoute.AskHarnessCompsData
compSel() - Method in interface nxopen.formboard.FlipComponentBuilder
Returns the formboard component selected by user for flipping operation
License requirements: routing_harness ("Routing Harness")
.
compSelect() - Method in interface nxopen.tooling.MoldProcessBuilder
Returns the component selected to be edited.
compTimeValue - Variable in class nxopen.NXObject.AttributeInformation
Time/Date attribute value (the default value is returned when reading templates of non-set attributes).
compType - Variable in class nxopen.features.sheetmetal.AeroFlangeBuilder.EndCompensationData
Automatic/Angle/Distance/None
ComputationalTime() - Constructor for class nxopen.NXObject.ComputationalTime
ComputationalTime(int, int) - Constructor for class nxopen.NXObject.ComputationalTime
Constructor for the ComputationalTime object.
computationScope() - Method in interface nxopen.cae.modelcheck.ElementEdgeCheckBuilder
Returns the computation scope
License requirements: None.
COMPUTED - Static variable in class nxopen.weld.EdgePrepValuesBuilder.Option
Use the computed values as edge prep values.
COMPUTED_ANGLE - Static variable in class nxopen.weld.WeldJointBuilder.SplitTypes
At angle computed from geometry and tables.
computeDefaultPoints() - Method in interface nxopen.geometricutilities.AlignmentMethodBuilder
Calculate default alignment points on existing sections.
computeDraping() - Method in interface nxopen.cae.LaminatePly
Launch the draping algorithm, overriding previous results
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
computedSize() - Method in interface nxopen.annotations.Dimension
Returns the computed size of the dimension.
computeFootCsys(HumanData.SideType) - Method in interface nxopen.HumanPosturePredictionBuilder
Compute the Foot Csys according to solid, curve or sae data.
computeHandCsys() - Method in interface nxopen.HumanPosturePredictionBuilder
Compute the Csys of both hands according to solid, curve or sae data.
ComputeHandCsysData() - Constructor for class nxopen.HumanPosturePredictionBuilder.ComputeHandCsysData
computeMacs() - Method in interface nxopen.cae.CorrelSolution
Computes the Model Assurance Criterion (MAC) correlation metric for active modes
License requirements: nx_correl_base ("FE Correlation")
.
ComputeMacsData() - Constructor for class nxopen.cae.CorrelSolution.ComputeMacsData
computeModelBounds() - Method in interface nxopen.uf.UFDisp
ComputeModelBoundsData() - Constructor for class nxopen.uf.UFDisp.ComputeModelBoundsData
computeModePairsForSol() - Method in interface nxopen.cae.CorrelSolution
Compute mode pairs for correlation solution
License requirements: nx_correl_base ("FE Correlation")
.
computeOffsetDirection() - Method in interface nxopen.features.OffsetCurveBuilder
To compute offset direction.
computeOffsetDirection(ICurve, Point3d) - Method in interface nxopen.features.OffsetCurveBuilder
To compute offset direction on the seed entity at the given seed point.
ComputeOffsetDirectionData() - Constructor for class nxopen.features.OffsetCurveBuilder.ComputeOffsetDirectionData
computeSBend(Point3d, Point3d, Vector3d, Vector3d, double, int) - Method in interface nxopen.routing.SBendCornerCollection
Compute a S-Bend curve given input.
computeSBendData(Point3d, Point3d, Vector3d, Vector3d, double, int) - Method in interface nxopen.routing.SBendCornerCollection
Compute a S-Bend parameters given input.
ComputeSBendData() - Constructor for class nxopen.routing.SBendCornerCollection.ComputeSBendData
computeStockLength(Tag) - Method in interface nxopen.uf.UFRoute
computeZones() - Method in interface nxopen.cae.Laminate
Compute zones.
computeZones() - Method in interface nxopen.cae.LaminateGlobalLayupMgr
Compute zones for all laminate properties in the model.
CONC_ARCS - Static variable in class nxopen.cam.DmAmBuilder.AmCutPatternTypes
Concentric Arcs
CONC_ARCS - Static variable in class nxopen.cam.DmBndBuilder.BndCutPatternTypes
Concentric Arcs
concatenate(Point3d) - Method in interface nxopen.View
Concatenates the given translation with the previous viewing transformation
of the specified view.
concatenate(double) - Method in interface nxopen.View
Concatenates the given scale with the previous viewing transformation
of the specified view.
concatenate(Point3d, double) - Method in interface nxopen.View
Concatenates the given translation and scale with the previous viewing
transformation of the specified view.
concatenate(Point3d, Vector3d, double) - Method in interface nxopen.View
Concatenates the given rotation with the previous viewing transformation
of the specified view.
concatenate(Point3d, Point3d, Vector3d, double) - Method in interface nxopen.View
Concatenates the given translation and rotation with the previous viewing
transformation of the specified view.
concatenate(double, Point3d, Vector3d, double) - Method in interface nxopen.View
Concatenates the given scale and rotation with the previous viewing
transformation of the specified view.
concatenate(Point3d, double, Point3d, Vector3d, double) - Method in interface nxopen.View
Concatenates the given translation, scale and rotation with the previous
viewing transformation of the specified view.
CONCAVE - Static variable in class nxopen.annotations.LineWeldDataBuilder.ContourSymbolType
CONCAVE - Static variable in class nxopen.annotations.SupplementarySymbol
Specifies concave supplementary weld symbol
CONCAVE - Static variable in class nxopen.features.LabelChamferBuilder.ChamferOrientType
CONCAVE - Static variable in class nxopen.weld.FilletBuilder.EnumContour
CONCAVE - Static variable in class nxopen.weld.PlugSlotBuilder.EnumContour
CONCAVE - Static variable in class nxopen.weld.WeldGrooveBuilder.Contour
CONCAVE_FIRST - Static variable in class nxopen.features.EdgeBlendBuilder.OrderOfBlending
Concave first
concaveCornerControl() - Method in interface nxopen.cam.TurnCutParameters
Returns the corner concave
License requirements: cam_base ("CAM BASE")
.
concaveCornerRadius() - Method in interface nxopen.die.AddSurfBuilder
Returns the concave corner radius value
License requirements: None.
concaveCorners() - Method in interface nxopen.cam.BoundaryTurnMemberSet
Returns the concave corners
License requirements: None.
ConcaveFaces - Interface in nxopen.features
Represents a radius faces feature
To create or edit an instance of this class, use
ConcaveFacesBuilder
Created in NX7.5.0
Represents a Concave Faces builder.
ConcaveFacesBuilder.CalculatePointCurvatureData - Class in nxopen.features
concaveRadius() - Method in interface nxopen.facet.CurvatureBuilder
Returns the concave radius threshold
License requirements: None.
CONCENTRIC - Static variable in class nxopen.annotations.GeometricCharacteristic
Specifies concentric characteristics
concentric() - Method in interface nxopen.InferredConstraintsBuilder
Returns the concentric infer-constraint setting.
CONCENTRIC - Static variable in class nxopen.positioning.Constraint.Type
Two geometries share a center and plane
CONCENTRIC - Static variable in class nxopen.Sketch.ConstraintType
concentric() - Method in interface nxopen.SketchAutoConstrainBuilder
Returns the concentric
License requirements: None.
CONCENTRIC - Static variable in class nxopen.SketchConstraintBuilder.Constraint
CONCENTRIC - Static variable in class nxopen.uf.UFSket.ConType
CONCENTRIC_CIRCLE - Static variable in class nxopen.annotations.DimensionType
Concentric Circle dimension
CONCENTRIC_TYPE - Static variable in class nxopen.uf.UFGdt.Characteristic
CONCENTRIC_ZIG - Static variable in class nxopen.cam.CutPatternBuilder.Types
Concentric Zig
CONCENTRIC_ZIG_WITH_CONTOUR - Static variable in class nxopen.cam.CutPatternBuilder.Types
Concentric Zig with Contour
CONCENTRIC_ZIG_WITH_STEPOVER - Static variable in class nxopen.cam.CutPatternBuilder.Types
Concentric Zig with Stepover
CONCENTRIC_ZIG_ZAG - Static variable in class nxopen.cam.CutPatternBuilder.Types
Concentric Zig Zag
ConcentricCircleDimension - Interface in nxopen.annotations
Represents a concentric circle dimension
To create or edit an instance of this class, use
ThicknessDimensionBuilder
Created in NX4.0.0
Returns a value that indicates whether add concentric relation recognition for the last curves added to curve collector
License requirements: None.
CONCENTRICITY - Static variable in class nxopen.annotations.FeatureControlFrameBuilder.FcfCharacteristic
concentricity
CONCENTRICITY - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.CharacteristicOptions
concentricity
CONCENTRICITY - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.TolType
Concentricity
CONCEPT_DESIGN - Static variable in class nxopen.tooling.QuickQuotationBuilder.Types
concept design type
conceptDesign() - Method in interface nxopen.tooling.BendInsertDesignBuilder
Returns the concept design option.
conceptDesign() - Method in interface nxopen.tooling.PiercingInsertBuilder
Returns the value indicating if the design is for a concept.
conceptDesign() - Method in interface nxopen.tooling.StandardPartBuilder
Returns the flag to indicate whether to add concept symbols instead of real standard parts.
conceptObjects() - Method in interface nxopen.tooling.MoldProcessBuilder
Returns the concept objects selected to be edited.
ConceptPositionBuilder - Interface in nxopen.tooling
ConceptPositionCollection - Interface in nxopen.tooling
Represents a collection of ConceptPosition
To obtain an instance of this class, refer to
ToolingManager
Created in NX6.0.0
Returns the ConceptPositionCollection instance belonging to this part .
CONCRETE - Static variable in class nxopen.annotations.AreaFillMaterial
Concrete
CONCRETE - Static variable in class nxopen.uf.UFDrf.AreaFillMaterial
CONCRETE - Static variable in class nxopen.uf.UFDrf.ValidMaterial
CONCURRENT - Static variable in class nxopen.routing.DesignRuleViolationCollection.Mode
Executes design rules on all concurrently logged objects.
ConcurrentDesignManagementBuilder - Interface in nxopen.tooling
ConcurrentDesignManagementBuilder.Types - Class in nxopen.tooling
Specifies the types of concurrent design management.
ConcurrentDesignManagementBuilder.UpdateTypes - Class in nxopen.tooling
Specifies the types of the update action.
condemnLayoutViewEntities() - Method in interface nxopen.routing.electrical.CablewaysLayoutView
Condemns the layout view entities.
condition() - Method in interface nxopen.cae.SimConditionTimeStep
Returns the Time Step condition
License requirements: None.
condition() - Method in interface nxopen.mechatronics.GanttOperationConditionBuilder
Returns the judging condition from current condition,the value can be 'And' or 'Or'
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
condition() - Method in interface nxopen.motion.PackagingMeasureBuilder
condition - Variable in class nxopen.uf.UFFltr.AskFilterData
Condition - Interface in nxopen.visualreporting
A Condition within a
Rule .
Represents the possible operator type options.
Condition.TypeOption - Class in nxopen.visualreporting
Represents the possible type options
for a
Condition .
Returns the id of condition
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
conditionList() - Method in interface nxopen.mechatronics.GanttOperationBuilder
Returns the condition data
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
conditionName - Variable in class nxopen.uf.UFAssem.Prev16Align
conditionOption() - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilder
Returns the condition type.
conditionParamCollection() - Method in interface nxopen.cae.SimConditionSeqMgr
conditionSeqManager() - Method in interface nxopen.cae.SimSimulation
Returns the Condition Sequence Manager
License requirements: None.
conditionSequenceCollection() - Method in interface nxopen.cae.SimConditionSeqMgr
conditionTag - Variable in class nxopen.uf.UFAssem.Prev16Align
conditionTimeStepCollection() - Method in interface nxopen.cae.SimConditionSequence
conditionValue() - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilder
Returns the condition value.
conditionValue() - Method in interface nxopen.mechatronics.GanttOperationConditionBuilder
Returns the condition value use to evaluate this condition for the selected property in condition object
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
CONDUCTANCE_PER_LENGTH - Static variable in class nxopen.cae.Result.Quantity
CONDUCTIVE_FLUX - Static variable in class nxopen.cae.Result.Quantity
conductorCount() - Method in interface nxopen.features.sheetmetal.FlexibleCableBuilder
Returns the count of conductors.
conductorSpacing() - Method in interface nxopen.features.sheetmetal.FlexibleCableBuilder
Returns the conductor spacing.
conductorWidth() - Method in interface nxopen.features.sheetmetal.FlexibleCableBuilder
Returns the conductor width.
CONE - Static variable in class nxopen.cam.CamInspectionOperationFeaturetypes
Cone
CONE - Static variable in class nxopen.cam.InspectionMethodBuilder.MethodTypes
Cone
Cone - Interface in nxopen.features
Represents a cone feature
To create or edit an instance of this class, use
ConeBuilder
Created in NX6.0.0
Generalized conical developable surface.
CONE - Static variable in class nxopen.positioning.ConstraintReference.GeometryType
Cone
CONE - Static variable in class nxopen.weld.DatumCommonBuilder.SolidTypes
Datum solid will be a cone
CONE_ANGLE - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.TolType
Angle of Cone
CONE_GEOM - Static variable in class nxopen.uf.UFBrep.GeomType
CONE_TOP_TYPE - Static variable in class nxopen.uf.UFModl.SmpunchTopType
coneAngle() - Method in interface nxopen.display.LightBuilder
Returns the cone angle - only applicable to spot light types
License requirements: None.
coneAngle - Variable in class nxopen.uf.UFView.LightAttributes
ConeBuilder - Interface in nxopen.features
Represents a builder for a cone feature.
ConeBuilder.Types - Class in nxopen.features
Represents the Cone type
coneDepth - Variable in class nxopen.uf.UFModl.SmpunchData
conehead(int, double[], double[], int) - Method in interface nxopen.uf.UFDisp
ConeheadAttrbSTag() - Constructor for class nxopen.uf.UFDisp.ConeheadAttrbSTag
ConeheadAttrbSTag(double, double, double, int, int, int) - Constructor for class nxopen.uf.UFDisp.ConeheadAttrbSTag
coneRadius - Variable in class nxopen.uf.UFDisp.ConeheadAttrbSTag
confidenceLevel() - Method in interface nxopen.cae.LaminateRandomEventBuilder
Returns the confidence level (in %)
License requirements: None.
confidenceLevelOption() - Method in interface nxopen.cae.LaminateRandomEventBuilder
Returns the confidence level option
License requirements: None.
config - Variable in class nxopen.assemblies.ClearanceSet.InterferenceData
the configuration index
configAttribute() - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
Returns
the configure attribute, which is read from the design environment by the settings in
the configuration XML file.
configDetail() - Method in interface nxopen.pdm.ConfigurationContextBuilder
Returns the configuration detail
License requirements: None.
configFile() - Method in interface nxopen.features.shipdesign.FrameBarOutBuilder
Returns the config file name.
configFile() - Method in interface nxopen.features.shipdesign.ManufacturingOutBuilder
Returns the XML confiuration file
License requirements: None.
configFile() - Method in interface nxopen.JtCreator
Returns the ConfigFile file - the name of configuration file which used in translation
License requirements: None.
configMode() - Method in interface nxopen.pdm.ConfigurationContextBuilder
Returns the configuration mode
License requirements: None.
configName() - Method in interface nxopen.cae.PreTestExciterConfig
Returns the exciter selection configuration name
License requirements: None.
configRules - Variable in class nxopen.uf.UFUgmgr.ListConfigRulesData
configType() - Method in interface nxopen.pdm.ConfigurationContextBuilder
Returns the configuration type
License requirements: None.
configuration() - Method in interface nxopen.tooling.InitProjectBuilder
Returns the configuration access functions
License requirements: None.
configurationContext() - Method in interface nxopen.assemblies.SubsetBuilder
Returns the configuration context builder.
ConfigurationContextBuilder - Interface in nxopen.pdm
ConfigurationContextBuilder.ConfigContextMode - Class in nxopen.pdm
configuration mode
ConfigurationContextBuilder.ConfigContextType - Class in nxopen.pdm
configuration type
ConfigurationContextBuilder.ConfigurationDetail - Class in nxopen.pdm
configuration detail
configurationFile() - Method in interface nxopen.cam.Preferences
Returns the configuration file
License requirements: None.
ConfigurationManager - Interface in nxopen.pdm
configurationManager() - Method in interface nxopen.Session
configureContextMenu(ContextMenu, ContextMenuProperties) - Method in interface nxopen.menubar.MenuBarManager.ConfigureContextMenu
Prototype for the callback used to configure a context menu.
confirmUndo() - Method in interface nxopen.preferences.SessionUserInterfaceUI
Returns the confirm undo flag
License requirements: None.
CONFLICTING_WITH_WAVE - Static variable in class nxopen.positioning.Constraint.SolverStatus
The constraint has been suppressed because it's conflicting with WAVE
conflictingBcCount() - Method in interface nxopen.cae.SimSolution
Returns the number of conflicting BC pairs in this solution
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
ConflictingBcPairByIndexData() - Constructor for class nxopen.cae.SimSolution.ConflictingBcPairByIndexData
conflictingColor() - Method in interface nxopen.preferences.PartSketch
Returns the sketch conflicting color
License requirements: None.
ConflictingConstraintPairByIndexData() - Constructor for class nxopen.cae.SimSolution.ConflictingConstraintPairByIndexData
conflictingConstraintsCount() - Method in interface nxopen.cae.SimSolution
conflictLogicalObject() - Method in interface nxopen.mechatronics.ComparisonResult
Returns the conflict logical object from the comparison result
License requirements: None.
ConflictResolutionBuilder - Interface in nxopen.cae
ConflictResolutionBuilder.Rule - Class in nxopen.cae
Conflict Resolution Rule
conformToSurface() - Method in interface nxopen.annotations.RegionBuilder
ConGeom() - Constructor for class nxopen.uf.UFSket.ConGeom
ConGeom(Tag, UFSket.GeomVertex, int, UFSket.HelpType, double[], double) - Constructor for class nxopen.uf.UFSket.ConGeom
conGeoms - Variable in class nxopen.uf.UFSket.ReadGeometricConstraintData
conic() - Method in interface nxopen.cae.MeshPointConicCenterBuilder
Returns the node
License requirements: None.
Conic - Interface in nxopen
Represents a conic curve.
CONIC - Static variable in class nxopen.features.BridgeCurveBuilder.ShapeControlTypes
Deprecated.
conic parameter
CONIC - Static variable in class nxopen.features.BridgeCurveBuilderEx.ShapeControlMethods
Shape using rho value of a conic.
CONIC - Static variable in class nxopen.features.EdgeBlendBuilder.Section
Conical shaped blends
CONIC - Static variable in class nxopen.features.FaceBlendBuilder.CrossSectionOption
this means tangent continuous asymmetric conic type
CONIC - Static variable in class nxopen.features.SectionSurfaceBuilder.UDegreeEnum
Deprecated.
conic in u
CONIC - Static variable in class nxopen.features.SectionSurfaceBuilderEx.Types
Conic type
CONIC - Static variable in class nxopen.features.SectionSurfaceBuilderEx.UDegreeType
conic in u
CONIC - Static variable in class nxopen.preferences.PartObject.ObjectType
Conic
Conic() - Constructor for class nxopen.uf.UFCurve.Conic
Conic(Tag, int, double, double, double, double[], double, double) - Constructor for class nxopen.uf.UFCurve.Conic
CONIC - Static variable in class nxopen.uf.UFModl.BlendRadiusTypes
Conic.OrientationData - Class in nxopen
CONIC_ANCHOR - Static variable in class nxopen.InferSnapType.SnapType
Snap point at conic anchor
CONIC_AUTO_RHO - Static variable in class nxopen.uf.UFModl.BlendRadiusTypes
CONIC_SYMMETRIC - Static variable in class nxopen.features.FaceBlendBuilder.CrossSectionOption
this means tangent continuous symmetric conic type
CONICAL - Static variable in class nxopen.cam.BoundaryTurnMemberOffset.MethodType
CONICAL - Static variable in class nxopen.die.QuickBinderBuilder.Types
conical
CONICAL - Static variable in class nxopen.die.QuickBinderWrapBuilder.Types
Conical
CONICAL - Static variable in class nxopen.Face.FaceType
Conical face
CONICAL - Static variable in class nxopen.facet.FacetedFace.FacetedfaceType
Conical face
conical() - Method in interface nxopen.motion.BushingCylindricalCoefficientsComponent
conicalDamping - Variable in class nxopen.uf.UFMotion.CylindricalBushing
conicalExpression() - Method in interface nxopen.motion.BushingCylindricalCoefficientsComponent
Returns the conical coefficient expression, it is available only when
Motion.BushingCylindricalCoefficientsComponent#conicalType and Motion.BushingCylindricalCoefficientsComponent#setConicalType set to Motion.ConnectorCoefficientTypes#CONSTANT case
License requirements: None.
conicalFunction() - Method in interface nxopen.motion.BushingCylindricalCoefficientsComponent
Returns the conical function tag, it is available only when
Motion.BushingCylindricalCoefficientsComponent#conicalType and Motion.BushingCylindricalCoefficientsComponent#setConicalType set to Motion.ConnectorCoefficientTypes#SPLINE case
License requirements: None.
conicalStiffness - Variable in class nxopen.uf.UFMotion.CylindricalBushing
conicalType() - Method in interface nxopen.motion.BushingCylindricalCoefficientsComponent
Returns the conical coefficient type
License requirements: None.
conicCrossSection() - Method in interface nxopen.features.FaceBlendBuilder
Returns the face blend conic section
License requirements: None.
ConicCrossSection - Interface in nxopen.geometricutilities
Represents a conic section data for face blend.
ConicCrossSection.DefineMethod - Class in nxopen.geometricutilities
This enum represents the conic method for advanced symmetric conic
ConicCrossSection.DepthMethod - Class in nxopen.geometricutilities
This enum represents the depth option
ConicCrossSection.OffsetMethod - Class in nxopen.geometricutilities
This enum represents the offset options
ConicCrossSection.RhoMethod - Class in nxopen.geometricutilities
This enum represents the rho options
ConicCrossSection.ShapeSkewMethod - Class in nxopen.geometricutilities
This enum represents the shape skew option
conicData - Variable in class nxopen.uf.UFCurve.ConvertConicToStdData
conicMethod() - Method in interface nxopen.geometricutilities.ConicCrossSection
Returns the conic method for the advanced symmetric conic section with face blend
License requirements: None.
conicPrefix - Variable in class nxopen.uf.UFSket.AskPreferencesData
conicType - Variable in class nxopen.uf.UFCurve.Conic
conicTypeMode() - Method in interface nxopen.features.SectionSurfaceBuilderEx
Returns the conic type mode.
CONJUGATE - Static variable in class nxopen.cae.AfuMathOperation.MultiType
Conjugates AFU records
CONJUGATE - Static variable in class nxopen.die.AddendumSectionBuilder.SectionOrientationType
Use conjugate orientation.
CONJUGATE_GRADIENT - Static variable in class nxopen.optimization.OptimizationBuilder.OptimizationAlgorithmType
Conjugate gradient
connect(String, String, String) - Method in interface nxopen.issue.IssueManager
Connects to issue server and returns the
IssueSite
License requirements: nx_issue_mgmt ("NX Issue Tracking")
Created in NX8.5.0
Returns the connect angle of stiffener by support in degrees, negative value is not allowed
License requirements: None.
connectAngle() - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
Returns the connect angle of stiffener by support in degrees, negative value is not allowed
License requirements: None.
connectCurve() - Method in interface nxopen.features.RapidSurfaceBuilder
Accepts connect curve
License requirements: studio_free_form ("STUDIO FREE FORM")
.
connectCurves() - Method in interface nxopen.features.RapidSurfaceBuilder
Returns the connect curves
License requirements: studio_free_form ("STUDIO FREE FORM")
.
CONNECTED - Static variable in class nxopen.ApparentChainingRuleType
Connected Curves
CONNECTED - Static variable in class nxopen.features.shipdesign.EdgeReinforcementBuilder.EndCutTypes
CONNECTED - Static variable in class nxopen.features.shipdesign.EndCutBuilder.ConnectionTypes
If this Connection Type is set, the offset parameter will be ignored.
CONNECTED - Static variable in class nxopen.features.shipdesign.StiffenerSystemBuilder.EndCutTypes
CONNECTED - Static variable in class nxopen.FollowFilletRuleType
Connected Curves
connected - Variable in class nxopen.uf.UFRoute.AskPortConnectedPortData
CONNECTED_TO_COMPONENTS - Static variable in class nxopen.assemblies.ConstraintDisplayBuilder.VisibleConstraintsRuleOptions
Show only constraints that refer at least once to a selected component
ConnectedCurvesBuilder - Interface in nxopen.routing
Builder for creating automatically creating segments on end-to-end connected
curves.
ConnectedFaceFinderBuilder - Interface in nxopen.weld
Represents a builder to run the Connected Face Finder operation.
connectedPanelType() - Method in interface nxopen.weld.JointmarkBuilder
Returns the number of connected panels at a point.
connectedPartAttrToggle() - Method in interface nxopen.weld.ExportWeldBuilder
Returns the connected part attribute toggle to control if read connected part attributes from weld points
License requirements: ugweld ("UG WELD")
.
connectedPort - Variable in class nxopen.uf.UFRoute.AskPortConnectedPortData
connectingOnlyOnePart() - Method in interface nxopen.weld.WeldPointBuilder
Returns
License requirements: ugweld ("UG WELD")
.
CONNECTION - Static variable in class nxopen.cae.ElementTypeBuilder.ElementType
Connection
connectionFinder() - Method in interface nxopen.weld.ConnectedFaceFinderBuilder
Returns the connection finder object that manages the interaction.
ConnectionFinderBuilder - Interface in nxopen.weld
Represents a builder to display, manage, delete, and allow the user to
reparent face information for the weld objects.
ConnectionFinderBuilder.FilterTypes - Class in nxopen.weld
Filter values to control "Save All" processing.
connectionone - Variable in class nxopen.routing.RouteManager.ModelConnectionPostPlacementGasketData
One of the new gasket flange connections
connectionPoint - Variable in class nxopen.uf.UFDrf.SymbolConnection
CONNECTIONS - Static variable in class nxopen.routing.electrical.ElectricalFormat.Type
connections - Variable in class nxopen.uf.UFDrf.CustomSymbol
connectiontwo - Variable in class nxopen.routing.RouteManager.ModelConnectionPostPlacementGasketData
The other new gasket flange connection
connectionType() - Method in interface nxopen.features.shipdesign.EndCutBuilder
Returns the connection type.
connectionType - Variable in class nxopen.uf.UFDrf.SymbolConnection
connectiontypesone - Variable in class nxopen.routing.ReuseLibrary.SpecificationsGetConnectionCompatibilitiesData
Values for the first CONNECTION_TYPE attribute.
connectiontypestwo - Variable in class nxopen.routing.ReuseLibrary.SpecificationsGetConnectionCompatibilitiesData
Values for the second CONNECTION_TYPE attribute.
ConnectivityDefinition - Interface in nxopen.routing
The base class for various connection objects.
connectMember() - Method in interface nxopen.cam.BoundaryMemberSet
Returns the connect member
License requirements: None.
CONNECTOR - Static variable in class nxopen.cae.Result.GroupContainer
CONNECTOR - Static variable in class nxopen.formboard.UpdateDiscrepancy.ObjectType
ConnectorDevice object which
has a type of connector.
Connector - Interface in nxopen.motion
Represents a connector
This is an abstract class, and cannot be created.
CONNECTOR - Static variable in class nxopen.routing.electrical.ConnectorDevice.ComponentType
CONNECTOR - Static variable in class nxopen.routing.RouteManager.PartType
ConnectorBuilder - Interface in nxopen.motion
Represents ConnectorBuilder
This is an abstract class, and cannot be created.
ConnectorBuilder.AttachmentType - Class in nxopen.motion
Definitions of connector attachment type
ConnectorCoefficientTypes - Class in nxopen.motion
Definitions of connector coefficient type
ConnectorDevice - Interface in nxopen.routing.electrical
The Electrical ConnectorDevice corresponds to a connector instance of
SingleDevice .
Assignment method
ConnectorDevice.ComponentType - Class in nxopen.routing.electrical
Component type
ConnectorDevice.FindPlacerData - Class in nxopen.routing.electrical
ConnectorDeviceCollection - Interface in nxopen.routing.electrical
connectorDevices() - Method in interface nxopen.routing.RouteManager
ConnectorDevice collection .
connectorType() - Method in interface nxopen.routing.electrical.ConnectorDevice
Returns the connector type.
connectPart() - Method in interface nxopen.weld.JointmarkBuilder
Returns the option of connecting only one part.
connectPartPorts(Component) - Method in interface nxopen.routing.RouteManager
ConnectPathBuilder - Interface in nxopen.routing
connectPort(Tag) - Method in interface nxopen.uf.UFRoute
ConnectProfileParentBuilder - Interface in nxopen.die
Represents a Die Connecting Profile sub feature.
ConnectProfileParentBuilder.ProfileData - Class in nxopen.die
connectProfilesParent() - Method in interface nxopen.die.SteelInsertBuilder
Returns the connecting profiles parent builder of the diesteelinsert
License requirements: ug_die_design ("Die Design")
.
connectstring - Variable in class nxopen.pdm.PdmSession.TcserverSettingsData
the connection string
connectURL() - Method in interface nxopen.mechatronics.PreferencesBuilder
Returns the Simit Connect URL string
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
connectVector() - Method in interface nxopen.tooling.CoolingConnectBuilder
Returns the vector specified for creating connecting channel.
conNum - Variable in class nxopen.uf.UFSket.AskConstraintsOfGeometryData
conNum - Variable in class nxopen.uf.UFSket.AskGeoConsOfGeometryData
CONS_ASSOC_OFFSET - Static variable in class nxopen.uf.UFDisp.PolyMarker
CONS_ASSOC_OFFSET - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
CONS_ASSOC_TRIM - Static variable in class nxopen.uf.UFDisp.PolyMarker
CONS_ASSOC_TRIM - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
CONS_COINCIDENT - Static variable in class nxopen.uf.UFDisp.PolyMarker
CONS_COINCIDENT - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
CONS_COLLINEAR - Static variable in class nxopen.uf.UFDisp.PolyMarker
CONS_COLLINEAR - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
CONS_CONCENTRIC - Static variable in class nxopen.uf.UFDisp.PolyMarker
CONS_CONCENTRIC - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
CONS_CONSTANT_ANGLE - Static variable in class nxopen.uf.UFDisp.PolyMarker
CONS_CONSTANT_ANGLE - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
CONS_CONSTANT_LENGTH - Static variable in class nxopen.uf.UFDisp.PolyMarker
CONS_CONSTANT_LENGTH - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
CONS_EQUAL_LENGTH - Static variable in class nxopen.uf.UFDisp.PolyMarker
CONS_EQUAL_LENGTH - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
CONS_EQUAL_RADIUS - Static variable in class nxopen.uf.UFDisp.PolyMarker
CONS_EQUAL_RADIUS - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
CONS_FIX - Static variable in class nxopen.uf.UFDisp.PolyMarker
CONS_FIX - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
CONS_HORIZONTAL - Static variable in class nxopen.uf.UFDisp.PolyMarker
CONS_HORIZONTAL - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
CONS_MIDPOINT - Static variable in class nxopen.uf.UFDisp.PolyMarker
CONS_MIDPOINT - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
CONS_MIRROR - Static variable in class nxopen.uf.UFDisp.PolyMarker
CONS_MIRROR - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
CONS_NON_UNIFORM_SCALED - Static variable in class nxopen.uf.UFDisp.PolyMarker
CONS_NON_UNIFORM_SCALED - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
CONS_PARALLEL - Static variable in class nxopen.uf.UFDisp.PolyMarker
CONS_PARALLEL - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
CONS_PERPENDICULAR - Static variable in class nxopen.uf.UFDisp.PolyMarker
CONS_PERPENDICULAR - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
CONS_POINT_ON_CURVE - Static variable in class nxopen.uf.UFDisp.PolyMarker
CONS_POINT_ON_CURVE - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
CONS_SLOPE - Static variable in class nxopen.uf.UFDisp.PolyMarker
CONS_SLOPE - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
CONS_STRING - Static variable in class nxopen.uf.UFDisp.PolyMarker
CONS_STRING - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
CONS_TANGENT - Static variable in class nxopen.uf.UFDisp.PolyMarker
CONS_TANGENT - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
CONS_UNIFORM_SCALED - Static variable in class nxopen.uf.UFDisp.PolyMarker
CONS_UNIFORM_SCALED - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
CONS_VERTICAL - Static variable in class nxopen.uf.UFDisp.PolyMarker
CONS_VERTICAL - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
CONSERVATIVE - Static variable in class nxopen.cae.optimization.TBSTopologySensitivityOptimizationParameters.DensityUpdate
Conservative strategy
CONST_BREAK - Static variable in class nxopen.cam.ChipControl.Types
Chip control mode: Constant Break
CONST_CLEAR - Static variable in class nxopen.cam.ChipControl.Types
Chip control mode: Constant Clear
CONSTANT - Static variable in class nxopen.cam.AreaMillingSteepContainment.CutLevelTypes
Constant
CONSTANT - Static variable in class nxopen.cam.BladeCutLevels.DepthPerCutTypes
Constant
CONSTANT - Static variable in class nxopen.cam.BoundaryTurnMemberOffset.MethodType
CONSTANT - Static variable in class nxopen.cam.CenterlineDrillTurningBuilder.RemovalIncrementTypes
Removal Increment Type: Constant
CONSTANT - Static variable in class nxopen.cam.CutLevel.Types
Constant
CONSTANT - Static variable in class nxopen.cam.CutLevelPlanar.Types
Constant
CONSTANT - Static variable in class nxopen.cam.DmCmBuilder.ContactPositionRingHeightType
constant
CONSTANT - Static variable in class nxopen.cam.DmRadBuilder.RadStepoverTypeType
Constant
CONSTANT - Static variable in class nxopen.cam.DmSpiralBuilder.DmSpiralStepoverTypes
Constant
CONSTANT - Static variable in class nxopen.cam.FeedsOptimizationData.FeedRateRangeType
Constant
CONSTANT - Static variable in class nxopen.cam.FlowCutSteepContainment.CutLevelTypes
Constant
CONSTANT - Static variable in class nxopen.cam.PitchSetting.VarianceTypes
Constant
CONSTANT - Static variable in class nxopen.cam.StepoverBuilder.StepoverTypes
Constant
constant() - Method in interface nxopen.cam.TurnStock
Returns the constant stock
License requirements: None.
CONSTANT - Static variable in class nxopen.die.DrawBeadBuilder.FemaleDepthTypes
The female depth is a user specified constant.
CONSTANT - Static variable in class nxopen.die.DrawBeadBuilder.FemaleWidthTypes
The female width is a user specified constant.
CONSTANT - Static variable in class nxopen.die.DrawBeadSegmentBuilder.MaleBeadWidthTypes
The male bead width is specified by a constant value.
CONSTANT - Static variable in class nxopen.die.FlangeTaskBuilder.SpringbackTypes
Constant
CONSTANT - Static variable in class nxopen.die.SteelInsertSectionBuilder.ExtensionTypeOption
constant
CONSTANT - Static variable in class nxopen.die.SteelInsertSegmentChildBuilder.ExtensionTypeOption
constant
CONSTANT - Static variable in class nxopen.die.SteelInsertSegmentParentBuilder.ExtensionTypeOption
constant
CONSTANT - Static variable in class nxopen.features.AOCSBuilder.OffsetDistanceType
constant offset
CONSTANT - Static variable in class nxopen.features.GlobalShapingBuilder.OffsetMethod
Constant offset
CONSTANT - Static variable in class nxopen.features.GlobalShapingBuilder.RotationMethod
Constant anlge rotation
CONSTANT - Static variable in class nxopen.features.shipdesign.ExcessMaterialBuilder.Offset
constant offset
CONSTANT - Static variable in class nxopen.fields.FieldEvaluator.ValuesOutsideTableInterpolationEnum
Returns the boundary value as interpolation result
CONSTANT - Static variable in class nxopen.geometricutilities.ConicCrossSection.DepthMethod
Constant
CONSTANT - Static variable in class nxopen.geometricutilities.ConicCrossSection.OffsetMethod
Constant
CONSTANT - Static variable in class nxopen.geometricutilities.ConicCrossSection.RhoMethod
Constant
CONSTANT - Static variable in class nxopen.geometricutilities.ConicCrossSection.ShapeSkewMethod
Constant
CONSTANT - Static variable in class nxopen.geometricutilities.LawBuilder.Type
constant law type
CONSTANT - Static variable in class nxopen.geometricutilities.RadiusMethod
Constant
CONSTANT - Static variable in class nxopen.geometricutilities.ScalingMethodBuilder.ScalingOptions
Constant
CONSTANT - Static variable in class nxopen.motion.ConnectorCoefficientTypes
constant type
CONSTANT - Static variable in class nxopen.motion.DriverOperation.Type
Constant
CONSTANT - Static variable in class nxopen.motion.ForceValueTypes
constant type use constant value define force magnitude
CONSTANT - Static variable in class nxopen.motion.JointFrictionAdams.FrictionOverlapDelta
CONSTANT - Static variable in class nxopen.motion.JointFrictionRecurDyn.FrictionOverlapDelta
CONSTANT - Static variable in class nxopen.tooling.LayoutBuilder.LayoutSubType
Constanct circular type
CONSTANT - Static variable in class nxopen.tooling.PiercingInsertBuilder.NormalClearanceOptionType
The design option is normal
CONSTANT - Static variable in class nxopen.uf.UFModl.BlendRadiusTypes
CONSTANT_ANGLE - Static variable in class nxopen.Sketch.ConstraintType
CONSTANT_ANGLE - Static variable in class nxopen.SketchConstraintBuilder.Constraint
CONSTANT_ANGLE - Static variable in class nxopen.uf.UFSket.ConType
CONSTANT_INPUT - Static variable in class nxopen.uf.UFMotion.JointMotionInputType
CONSTANT_LENGTH - Static variable in class nxopen.Sketch.ConstraintType
CONSTANT_LENGTH - Static variable in class nxopen.SketchConstraintBuilder.Constraint
CONSTANT_LENGTH - Static variable in class nxopen.uf.UFSket.ConType
CONSTANT_PARAMETER - Static variable in class nxopen.Edge.EdgeType
Constant parameter edge
CONSTANT_RADIUS_CHAMFER - Static variable in class nxopen.cam.BoundaryTurnMemberCorner.CornerType
CONSTANT_VELOCITY - Static variable in class nxopen.cae.responsesimulation.VelocityImpactExcitationBuilder.ImpactMethodType
the users will only be able to specify the velocity for the impact
CONSTANT_WIDTH - Static variable in class nxopen.blockstyler.Tree.ColumnResizePolicy
Constant width
constantIncrement() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
Returns the constant increment
License requirements: None.
constantIncrement() - Method in interface nxopen.cam.ChipControl
Returns the Constant Increment
License requirements: None.
constantLowerLimit() - Method in interface nxopen.cam.FeedsOptimizationData
Returns the constant lower limit
License requirements: None.
Constants - Class in nxopen.annotations
Constants for annotations
Constants - Class in nxopen.layer
Constants for layers
constantThickness() - Method in interface nxopen.features.sheetmetal.SolidPunchBuilder
Returns the option to maintain constant thickness during thickening.
constantUObjects() - Method in interface nxopen.fields.SpatialMapBuilder
constantUpperLimit() - Method in interface nxopen.cam.FeedsOptimizationData
Returns the constant upper limit
License requirements: None.
constantValue() - Method in interface nxopen.motion.ScalarForceBuilder
constantValue() - Method in interface nxopen.motion.ScalarTorqueBuilder
CONSTANTVELOCITY - Static variable in class nxopen.motion.JointDefine.Type
This joint type allows 2 rotation DOFs,
rotation about both z axes of the joint markers,
Rotation about the second marker's z-axis is equal
and opposite to the first marker's rotation.
constantVObjects() - Method in interface nxopen.fields.SpatialMapBuilder
CONSTRAINED - Static variable in class nxopen.features.StudioXformBuilderEx.PoleEditType
Edited maintaining constraint
CONSTRAINED_LAPLACIAN - Static variable in class nxopen.cae.optimization.TBSMeshSmooth.Strategy
Constrained Laplacian Strategy
constrainedEndPoint1() - Method in interface nxopen.features.AestheticFaceBlendBuilder
Returns the end point1
License requirements: None.
constrainedEndPoint2() - Method in interface nxopen.features.AestheticFaceBlendBuilder
Returns the end point2
License requirements: None.
constrainedPlaneCSYS() - Method in interface nxopen.features.GeneralConicBuilder
Returns the constrained plane.
constrainedStartPoint1() - Method in interface nxopen.features.AestheticFaceBlendBuilder
Returns the start point1
License requirements: None.
constrainedStartPoint2() - Method in interface nxopen.features.AestheticFaceBlendBuilder
Returns the start point2
License requirements: None.
constraint() - Method in interface nxopen.AttributeTemplatesBuilder
Returns the constraint.
CONSTRAINT - Static variable in class nxopen.cae.LbcAssociationMgr.BcType
Associate constraints
CONSTRAINT - Static variable in class nxopen.cae.SimLbcFolder.Type
Constraint type folder
constraint() - Method in interface nxopen.geometricutilities.MatchSurfaceBuilder
Returns the continuity type for matching
License requirements: None.
constraint() - Method in interface nxopen.geometricutilities.PointSetAlignmentBuilder
Returns the constraint
License requirements: None.
Constraint - Interface in nxopen.positioning
Constraint for use in positioning objects in NX.
Constraint() - Constructor for class nxopen.uf.UFCurve.Constraint
Constraint(UFCurve.ConstraintType, UFCurve.EndType, Tag, double, UFCurve.HelpData) - Constructor for class nxopen.uf.UFCurve.Constraint
constraint - Variable in class nxopen.uf.UFModlFeatures.AskFaceConstraintData
Constraint.Alignment - Class in nxopen.positioning
Specifies alignment of directed geometries used in a constraint.
Constraint.SolverStatus - Class in nxopen.positioning
Specifies the status of a constraint.
Constraint.SplineType - Class in nxopen.positioning
Specifies how the spline points define the shape of the spline.
Constraint.Type - Class in nxopen.positioning
Specifies the type of a constraint.
CONSTRAINT_IMPLICIT - Static variable in class nxopen.assemblies.PositionOverrideType
Position implicitly overridden because of assembly constraints
CONSTRAINT_MODE - Static variable in class nxopen.cae.BaseIteration.IterationType
Constraint Modal Analysis Iteration
CONSTRAINT_NONE - Static variable in class nxopen.uf.UFCurve.ConstraintType
constraintAlignment() - Method in interface nxopen.positioning.Constraint
Returns
the alignment behavior for the constraint.
constraintChecking() - Method in interface nxopen.cae.optimization.DAOStopCondition
Returns the constraint checking flag, only effective for global sensitivity optimization type
License requirements: None.
ConstraintCollection - Interface in nxopen.positioning
a collection of constraints
To obtain an instance of this class, refer to
Positioner
Created in NX5.0.0
Returns the constraint curve.
constraintCurveFromTargetRegion() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
Returns the collection of constraint curve from target region
License requirements: None.
constraintCurveFromUnformRegion() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
Returns the collection of constraint curve from unform region
License requirements: None.
constraintCurveToEdit() - Method in interface nxopen.die.AddendumSectionBuilder
Returns the constraint curve to edit.
constraintDelayed - Variable in class nxopen.PartDelayedUpdateStatus.DelayStatusInfo
The part is delayed because assembly constraints are delayed.
ConstraintDisplayBuilder - Interface in nxopen.assemblies
ConstraintDisplayBuilder.VisibleConstraintsRuleOptions - Class in nxopen.assemblies
This enum is used to control which constraints are treated as connected to the selected
components.
constraintFace() - Method in interface nxopen.features.CoplanarBuilder
Returns the face change
License requirements: None.
constraintFaces() - Method in interface nxopen.die.AddendumSectionBuilder
Returns the constraint faces.
constraintFaces() - Method in interface nxopen.features.BridgeCurveBuilder
constraintFaces() - Method in interface nxopen.features.BridgeCurveBuilderEx
Returns the constraint faces
License requirements: None.
constraintFaces() - Method in interface nxopen.features.NSidedSurfaceBuilder
Returns the constraint faces
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
constraintFaces() - Method in interface nxopen.geometricutilities.Continuity
Returns the constraint face collector.
ConstraintGeometry() - Constructor for class nxopen.Sketch.ConstraintGeometry
ConstraintGeometry(NXObject, Sketch.ConstraintPointType, int) - Constructor for class nxopen.Sketch.ConstraintGeometry
Constructor for the ConstraintGeometry object.
ConstraintGeometryHelp() - Constructor for class nxopen.Sketch.ConstraintGeometryHelp
ConstraintGeometryHelp(Sketch.ConstraintGeometryHelpType, Point3d, double) - Constructor for class nxopen.Sketch.ConstraintGeometryHelp
Constructor for the ConstraintGeometryHelp object.
constraintId - Variable in class nxopen.bodydes.OnestepUnformBuilder.MeshesData
constraintIndex - Variable in class nxopen.uf.UFAssem.Prev16Align
constraintLimitType - Variable in class nxopen.optimization.OptimizationBuilder.OptimizationConstraint
constraint limit type, lower type or upper type
constraintLowerLimitValue - Variable in class nxopen.optimization.OptimizationBuilder.OptimizationConstraint
Lower limit value
constraintManager() - Method in interface nxopen.features.CurveOnSurfaceBuilder
Returns the constraint manager
License requirements: solid_modeling ("SOLIDS MODELING")
.
constraintManager() - Method in interface nxopen.features.FitCurveBuilder
Returns the constraint manager
License requirements: None.
constraintManager() - Method in interface nxopen.features.IsoparametricCurvesBuilder
Returns the constraint manager.
constraintManager() - Method in interface nxopen.features.PolylineBuilder
Returns the constraint manager
License requirements: None.
constraintManager() - Method in interface nxopen.features.StudioSplineBuilder
constraintManager() - Method in interface nxopen.features.StudioSplineBuilderEx
Returns the constraint manager
License requirements: None.
constraintManager() - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
Returns the constraint manager
License requirements: studio_free_form ("STUDIO FREE FORM")
.
constraintManager() - Method in interface nxopen.geometricutilities.CurveShapingBuilder
Returns the constraint manager.
constraintManager() - Method in interface nxopen.geometricutilities.SelectDividingObjectBuilder
Returns the iso parameter point
License requirements: None.
constraintName() - Method in interface nxopen.features.sheetmetal.SMBoundaryConditionBuilder
Returns the constraint name.
constraintName - Variable in class nxopen.uf.UFAssem.Prev16Align
constraintPlane() - Method in interface nxopen.features.PolylineBuilder
Returns the coordinate system defining plane constraint
License requirements: None.
constraintPlane() - Method in interface nxopen.features.StudioSplineBuilderEx
Returns the coordinate system defining plane constraint
License requirements: None.
constraintPoint() - Method in interface nxopen.routing.StockOffsetPointBuilder
Returns the point that defines the location of the selected point.
constraintRadius() - Method in interface nxopen.features.BridgeCurveBuilderEx
Returns the constraint radius
License requirements: None.
ConstraintReference - Interface in nxopen.positioning
ConstraintReference for use in positioning objects in NX.
ConstraintReference.ConstraintOrder - Class in nxopen.positioning
Specifies the order of the constraint reference used in a
Constraint .
Specifies the half space value of one geometry used in a distance constraint.
constraintReferenceHalfSpace() - Method in interface nxopen.positioning.ConstraintReference
Returns
the half_space value for the constraint reference.
ConstraintResolutionBuilder - Interface in nxopen.cae
ConstraintResolutionBuilder.Rule - Class in nxopen.cae
Deprecated.
Constraint Resolution Rule
constraints() - Method in interface nxopen.cae.optimization.TBSOptimizationSolution
Represents the response constrain collection belonging to this optimization solution .
constraints() - Method in interface nxopen.cae.SimSimulation
Returns the constraint collection belonging to this sim part .
constraints() - Method in interface nxopen.positioning.Positioner
The collection of
Constraint s defined in the positioner
Created in NX3.0.0
The constraints that were created by the fillet.
constraints - Variable in class nxopen.uf.UFCurve.LineArc
constraintSetManager() - Method in interface nxopen.features.RapidSurfaceBuilder
Returns the constraint set manager
License requirements: studio_free_form ("STUDIO FREE FORM")
.
constraintSlopeType() - Method in interface nxopen.SketchG1Constraint
Returns the slope type of the constraint.
constraintsToMotionObject(NXObject, NXObject) - Method in interface nxopen.motion.MotionSession
Convert mating conditions and constraints to links and joints
License requirements: mechanisms ("MECHANISMS")
.
constraintSymbolSize() - Method in interface nxopen.preferences.SessionSketch
Returns the constraint symbol size.
constraintSymbolSize() - Method in interface nxopen.preferences.SketchPreferences
Returns the constraint symbol size
License requirements: None.
constraintType() - Method in interface nxopen.bodydes.OnestepUnformBuilder
Returns the constraint type for intermediate unform or complete unform.
constraintType() - Method in interface nxopen.cae.optimization.TBSConstraintBuilder
Returns the constraint type
License requirements: None.
constraintType() - Method in interface nxopen.DatumConstraint
Returns
License requirements: solid_modeling ("SOLIDS MODELING")
.
constraintType() - Method in interface nxopen.features.sheetmetal.SMBoundaryConditionBuilder
Returns the constraint type
License requirements: None.
constraintType - Variable in class nxopen.optimization.OptimizationBuilder.OptimizationConstraint
Constraint type
constraintType() - Method in interface nxopen.positioning.Constraint
Returns
the constraint type.
constraintType() - Method in interface nxopen.SketchConstraint
Returns the constraint's type
License requirements: None.
constraintType() - Method in interface nxopen.SketchConstraintBuilder
Returns the constraint type
License requirements: None.
constraintType - Variable in class nxopen.uf.UFCurve.Constraint
constraintUMax() - Method in interface nxopen.features.RefitFaceBuilder
Returns the refit face Umax constraint
License requirements: None.
constraintUMin() - Method in interface nxopen.features.RefitFaceBuilder
Returns the refit face Umin constraint
License requirements: None.
constraintUpperLimitValue - Variable in class nxopen.optimization.OptimizationBuilder.OptimizationConstraint
Upper limit value
constraintValue() - Method in interface nxopen.cae.optimization.TBSConstraintBuilder
Returns the constrain value
License requirements: None.
constraintVMax() - Method in interface nxopen.features.RefitFaceBuilder
Returns the refit face Vmax constraint
License requirements: None.
constraintVMin() - Method in interface nxopen.features.RefitFaceBuilder
Returns the refit face Vmin constraint
License requirements: None.
construct(StylerEvent) - Method in interface nxopen.uistyler.DialogItem.Construct
Called when the dialog displays.
CONSTRUCT_REASON - Static variable in class nxopen.uistyler.StylerEvent.Reason
Construct reason
CONSTRUCTED - Static variable in class nxopen.PlaneTypes.MethodType
Constructed types: super type for At Angle Parallel/Perpendicular or Tangent Angle to Plane Parallel/Perpendicular
constructGeometryColor() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
Returns the color that will be used for the various construction curves.
constructGeometryFont() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
Returns the font that will be used for the various construction curves.
constructGeometryLayer() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
Returns the layer that will be used for the various construction curves.
constructGeometryWidth() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
Returns the line width that will be used for the various construction curves.
construction() - Method in interface nxopen.features.ThroughCurveMeshBuilder
Returns the construction options.
construction() - Method in interface nxopen.features.ThroughCurvesBuilder
Returns the construction options.
constructionCurve - Variable in class nxopen.uf.UFDraw.BreakRegionBoundary
constructionFace1() - Method in interface nxopen.features.LabelChamferBuilder
Returns the construction face1 of chamfer face
License requirements: None.
constructionFace2() - Method in interface nxopen.features.LabelChamferBuilder
Returns the construction face2 of chamfer face
License requirements: None.
constructionMethod() - Method in interface nxopen.weld.FilletBuilder
Returns the value for determining the construction method.
constructionMethod() - Method in interface nxopen.weld.JointmarkBuilder
Returns the construction method for creating Jointmark
License requirements: ugweld ("UG WELD")
.
constructionMethodOption() - Method in interface nxopen.features.shipdesign.RollingLineBuilder
Returns the value specifying which construction method to use for creating the rolling line.
constructor(int) - Method in interface nxopen.bodydes.OnestepUnformBuilder
Constructs solver to prepare the data.
constructParametersData() - Method in interface nxopen.tooling.AddReusablePart
Constructs the parameters data, reads data from part family or spreadsheet and updates the parameter data in the part
License requirements: None.
constructSurfaceBoundaryCurve(boolean) - Method in interface nxopen.features.BridgeSurfaceBuilder
Constructs bridge surface boundary curve
License requirements: solid_modeling ("SOLIDS MODELING")
.
constStatus - Variable in class nxopen.uf.UFDraw.BreakoutData
constStatus - Variable in class nxopen.uf.UFDraw.ViewBoundary
constThickness - Variable in class nxopen.uf.UFSf.MidsrfUserParms
constUObjects() - Method in interface nxopen.fields.SpatialMapBuilder
Returns the list of
PathObjects objects that define sections of constant u
License requirements: None.
Returns the list of
PathObjects objects that define sections of constant v
License requirements: None.
type on each side.
CONT1IN2 - Static variable in class nxopen.assemblies.ClearanceSet.InterferenceType
CONT2IN1 - Static variable in class nxopen.assemblies.ClearanceSet.InterferenceType
CONT_ORDER_ILLEGAL - Static variable in class nxopen.uf.UFConstants
CONTACT - Static variable in class nxopen.cae.ElementTypeBuilder.ElementType
Contact element
CONTACT - Static variable in class nxopen.cam.BoundarySet.ToolPositionTypes
tool tip positioned contacting boundary
CONTACT - Static variable in class nxopen.cam.DPMItpBuilder.ToolPositionOption
Contact position
CONTACT - Static variable in class nxopen.cam.ProbeControlParametersBuilder.AdjustmentTypes
Contact Point
CONTACT_CURVE - Static variable in class nxopen.geometricanalysis.GapFlushnessBuilder.SectionCurveOptions
use contact curve
CONTACT_DISPLACEMENT - Static variable in class nxopen.cae.Result.Quantity
CONTACT_EDGE - Static variable in class nxopen.cae.MeshCollectorBuilder.ElementDimensionOption
edge contact
CONTACT_FACE - Static variable in class nxopen.cae.MeshCollectorBuilder.ElementDimensionOption
face contact
CONTACT_FINAL_SEPARATION - Static variable in class nxopen.cae.Result.Quantity
CONTACT_FORCE - Static variable in class nxopen.cae.Result.Quantity
CONTACT_GAP_DISTANCE - Static variable in class nxopen.cae.Result.Quantity
CONTACT_INITIAL_SEPARATION - Static variable in class nxopen.cae.Result.Quantity
CONTACT_PENETRATION - Static variable in class nxopen.cae.Result.Quantity
CONTACT_PRESSURE - Static variable in class nxopen.cae.Result.Quantity
CONTACT_SLIP_INCREMENTAL_DISPLACEMENT - Static variable in class nxopen.cae.Result.Quantity
CONTACT_SLIPTOTAL_DISPLACEMENT - Static variable in class nxopen.cae.Result.Quantity
CONTACT_STATUS - Static variable in class nxopen.cae.Result.Quantity
CONTACT_TRACTION - Static variable in class nxopen.cae.Result.Quantity
contactArcAxis - Variable in class nxopen.uf.UFPath.ContactData
contactArcCenter - Variable in class nxopen.uf.UFPath.ContactData
contactArcRadius - Variable in class nxopen.uf.UFPath.ContactData
contactAxis - Variable in class nxopen.uf.UFPath.ContactData
contactBnd() - Method in interface nxopen.cam.FlowBuilder
Returns the Cleanup Output, Contact Boundary
License requirements: None.
ContactData() - Constructor for class nxopen.uf.UFPath.ContactData
ContactData(double[], double[], double[], double[], double, UFPath.Shape) - Constructor for class nxopen.uf.UFPath.ContactData
contactEdge() - Method in interface nxopen.cae.ContactMeshBuilder
Returns the contact edge or the source edge
License requirements: None.
contactEdge - Variable in class nxopen.uf.UFSf.ContactMeshData
contactEdgeEndLimit - Variable in class nxopen.uf.UFSf.ContactMeshData
contactEdgeEndPoint() - Method in interface nxopen.cae.ContactMeshBuilder
Returns the end point of contact on contact edge
License requirements: None.
contactEdgeMeshDir - Variable in class nxopen.uf.UFSf.ContactMeshData
contactEdgeStartLimit - Variable in class nxopen.uf.UFSf.ContactMeshData
contactEdgeStartPoint() - Method in interface nxopen.cae.ContactMeshBuilder
Returns the start point of contact on contact edge
License requirements: None.
ContactMeshBuilder - Interface in nxopen.cae
ContactMeshBuilder.AlignmentType - Class in nxopen.cae
the type of alignment to be created
ContactMeshData() - Constructor for class nxopen.uf.UFSf.ContactMeshData
ContactMeshData(String, Tag, int, int, int, int, double, Tag, UFSf.MeshGeomMeshdir, double, double, Tag, UFSf.MeshGeomMeshdir, double, double) - Constructor for class nxopen.uf.UFSf.ContactMeshData
contactMethod - Variable in class nxopen.uf.UFMotion.Ask3dContactMethodData
contactName() - Method in interface nxopen.motion.CurveContactBuilder
Returns the contact name
License requirements: None.
contactOffset() - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
Returns the contact offset.
ContactParameters() - Constructor for class nxopen.uf.UFMotion.ContactParameters
ContactParameters(double, double, double, double, double, double, double) - Constructor for class nxopen.uf.UFMotion.ContactParameters
contactPoint() - Method in interface nxopen.motion.CouplerBuilder
Returns the contact point
License requirements: None.
contactPositionBottomDistance() - Method in interface nxopen.cam.DmCmBuilder
Returns the Contact Position Bottom Distance
License requirements: None.
contactPositionDistance() - Method in interface nxopen.cam.DmCmBuilder
Returns the Contact Position Distance
License requirements: None.
contactPositionRingHeight() - Method in interface nxopen.cam.DmCmBuilder
Returns the contact position ring height type
License requirements: None.
contactPositionTopDistance() - Method in interface nxopen.cam.DmCmBuilder
Returns the Contact Position Top Distance
License requirements: None.
contactPt - Variable in class nxopen.uf.UFPath.ContactData
contactShape - Variable in class nxopen.uf.UFPath.ContactData
contactSide1 - Variable in class nxopen.uf.UFMotion.Motion3DContact
contactSide2 - Variable in class nxopen.uf.UFMotion.Motion3DContact
contactTypeOption() - Method in interface nxopen.motion.BodyContactRecurdyn
Returns the contact type option
License requirements: None.
contactTypeOption() - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
Returns the contact type.
conTags - Variable in class nxopen.uf.UFSket.AskConstraintsOfGeometryData
conTags - Variable in class nxopen.uf.UFSket.AskConstraintsOfSketchData
conTags - Variable in class nxopen.uf.UFSket.AskGeoConsOfGeometryData
conTags - Variable in class nxopen.uf.UFSket.AskGeoConsOfSketchData
conTags - Variable in class nxopen.uf.UFSket.AskInferredConsOfSketchData
conTags - Variable in class nxopen.uf.UFSket.MirrorObjectsData
containerFile() - Method in interface nxopen.tooling.ReusableObject
Returns the file which contains the reusable objects, could be part file or XML file
License requirements: None.
containerName() - Method in interface nxopen.features.shipdesign.ShipContainerBuilder
Returns
the name used in generating Item IDs for newly created Ship objects
License requirements: None.
containerPart() - Method in interface nxopen.features.shipdesign.ShipContainerBuilder
Returns
the part to which are added newly created Ship objects
License requirements: None.
containmentType() - Method in interface nxopen.cam.EditSubopCommand
Returns the containment type
License requirements: None.
CONTAINS - Static variable in class nxopen.annotations.SearchModelViewBuilder.TextComparisionOptions
Contains
contains(Annotation) - Method in interface nxopen.annotations.SelectAnnotationList
Returns whether the specified object is already in the list or not.
contains(BaseCustomSymbol) - Method in interface nxopen.annotations.SelectBaseCustomSymbolList
Returns whether the specified object is already in the list or not.
contains(OrdinateDimension) - Method in interface nxopen.annotations.SelectOrdinateDimensionList
Returns whether the specified object is already in the list or not.
contains(TableSection) - Method in interface nxopen.annotations.SelectTableSectionList
Returns whether the specified object is already in the list or not.
contains(Component) - Method in interface nxopen.assemblies.SelectComponentList
Returns whether the specified object is already in the list or not.
contains(CAEBody) - Method in interface nxopen.cae.SelectCAEBodyList
Returns whether the specified object is already in the list or not.
contains(CAEEdge) - Method in interface nxopen.cae.SelectCAEEdgeList
Returns whether the specified object is already in the list or not.
contains(CAEFace) - Method in interface nxopen.cae.SelectCAEFaceList
Returns whether the specified object is already in the list or not.
contains(FEElemFace) - Method in interface nxopen.cae.SelectFEElemFaceList
Returns whether the specified object is already in the list or not.
contains(FENode) - Method in interface nxopen.cae.SelectFENodeList
Returns whether the specified object is already in the list or not.
contains(Mesh) - Method in interface nxopen.cae.SelectMeshList
Returns whether the specified object is already in the list or not.
contains(CAMFeature) - Method in interface nxopen.cam.SelectCAMFeatureList
Returns whether the specified object is already in the list or not.
contains(DraftingView) - Method in interface nxopen.drawings.SelectDraftingViewList
Returns whether the specified object is already in the list or not.
contains(DrawingView) - Method in interface nxopen.drawings.SelectDrawingViewList
Returns whether the specified object is already in the list or not.
contains(FacetedBody) - Method in interface nxopen.facet.SelectFacetedBodyList
Returns whether the specified object is already in the list or not.
contains(DatumCsys) - Method in interface nxopen.features.SelectDatumCsysList
Returns whether the specified object is already in the list or not.
contains(Feature) - Method in interface nxopen.features.SelectFeatureList
Returns whether the specified object is already in the list or not.
contains(Component) - Method in interface nxopen.layout2d.SelectComponentList
Returns whether the specified object is already in the list or not.
contains(CollisionSensor) - Method in interface nxopen.mechatronics.SelectCollisionSensorList
Returns whether the specified object is already in the list or not.
contains(LogicObject) - Method in interface nxopen.mechatronics.SelectLogicObjectList
Returns whether the specified object is already in the list or not.
contains(Body) - Method in interface nxopen.SelectBodyList
Returns whether the specified object is already in the list or not.
contains(CoordinateSystem) - Method in interface nxopen.SelectCoordinateSystemList
Returns whether the specified object is already in the list or not.
contains(Curve) - Method in interface nxopen.SelectCurveList
Returns whether the specified object is already in the list or not.
contains(DatumPlane) - Method in interface nxopen.SelectDatumPlaneList
Returns whether the specified object is already in the list or not.
contains(DisplayableObject) - Method in interface nxopen.SelectDisplayableObjectList
Returns whether the specified object is already in the list or not.
contains(Edge) - Method in interface nxopen.SelectEdgeList
Returns whether the specified object is already in the list or not.
contains(Expression) - Method in interface nxopen.SelectExpressionList
Returns whether the specified object is already in the list or not.
contains(Face) - Method in interface nxopen.SelectFaceList
Returns whether the specified object is already in the list or not.
contains(IBaseCurve) - Method in interface nxopen.SelectIBaseCurveList
Returns whether the specified object is already in the list or not.
contains(IBasePlane) - Method in interface nxopen.SelectIBasePlaneList
Returns whether the specified object is already in the list or not.
contains(ICurve) - Method in interface nxopen.SelectICurveList
Returns whether the specified object is already in the list or not.
contains(INXObject) - Method in interface nxopen.SelectINXObjectList
Returns whether the specified object is already in the list or not.
contains(IParameterizedSurface) - Method in interface nxopen.SelectIParameterizedSurfaceList
Returns whether the specified object is already in the list or not.
contains(NXObject) - Method in interface nxopen.SelectNXObjectList
Returns whether the specified object is already in the list or not.
contains(TaggedObject) - Method in interface nxopen.SelectObjectList
Returns whether the specified object is already in the list or not.
contains(Part) - Method in interface nxopen.SelectPartList
Returns whether the specified object is already in the list or not.
contains(Plane) - Method in interface nxopen.SelectPlaneList
Returns whether the specified object is already in the list or not.
contains(Point) - Method in interface nxopen.SelectPointList
Returns whether the specified object is already in the list or not.
contains(Spline) - Method in interface nxopen.SelectSplineList
Returns whether the specified object is already in the list or not.
contains(TaggedObject) - Method in interface nxopen.SelectTaggedObjectList
Returns whether the specified object is already in the list or not.
CONTAINS_OPERATOR - Static variable in class nxopen.visualreporting.Condition.OperatorOption
containsBreps - Variable in class nxopen.uf.UFPart.AskJtInfoOfPartData
content() - Method in interface nxopen.drafting.PrimaryContentItemBuilder
Returns the content.
content() - Method in interface nxopen.markup.Text
Returns the text content
License requirements: None.
contents() - Method in interface nxopen.annotations.MasterSymbolBuilder
Returns the select object
License requirements: None.
contents() - Method in interface nxopen.layout2d.DefineComponentBuilder
Returns the select objects to create a 2D Component definition
License requirements: None.
context() - Method in interface nxopen.issue.SnapshotSubsetBuilder
Returns the context indicating the issue snapshot subset type.
context() - Method in interface nxopen.mechatronics.GanttOperationBuilder
Returns the owner part of operation
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
context() - Method in interface nxopen.mechatronics.ProxyObjectBuilder
Returns the context part of the proxy object
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
context() - Method in interface nxopen.mechatronics.ProxyOverrideObjectBuilder
Returns the context part of the proxy override object
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
context() - Method in interface nxopen.menubar.ContextMenuProperties
Returns a description for the context for which the menu was created
License requirements: None.
context() - Method in interface nxopen.positioning.MatingConverter
Returns
the current conversion context in which mating conditions will be converted.
CONTEXT - Static variable in class nxopen.preferences.SessionAssemblies.PositioningTaskCollectionOptionForDesignElements
contextAttribute() - Method in interface nxopen.features.shipdesign.QualifySketchBuilder
Returns the context attribute.
contextAttribute() - Method in interface nxopen.features.shipdesign.ShipNamesBuilder
Returns
the Context Attribute value.
contextCollection() - Method in interface nxopen.assemblies.PositioningTaskBuilder
Returns the context collection
License requirements: None.
contextids - Variable in class nxopen.pdm.VariantConfigurationBuilder.VariantRuleTableInformationData
array of contextIds comprising of multifield key and itemRev_id from which variant rules are selected
ContextMenu - Interface in nxopen.menubar
Represents a Context Menu .
ContextMenuEntry - Interface in nxopen.menubar
Represents an entry on a context menu.
ContextMenuEntry.Type - Class in nxopen.menubar
Specifies the type of the menu entry.
ContextMenuProperties - Interface in nxopen.menubar
Provides information about the MenuBar.ContextMenu object being customized.
contextRunning - Variable in class nxopen.uf.UFDisp.Inquire
contexts - Variable in class nxopen.uf.UFUgmgr.ListContextsData
contiguityFlag - Variable in class nxopen.uf.UFBound.MemberData
continuationNote() - Method in interface nxopen.annotations.TableSectionStyleBuilder
Returns the continuation note flag setting
License requirements: None.
continuationNote - Variable in class nxopen.uf.UFTabnot.SectionPrefs
continuationProperty() - Method in interface nxopen.annotations.TableSectionStyleBuilder
Returns the continuation property type
License requirements: None.
continuationSpacing() - Method in interface nxopen.annotations.TableSectionStyleBuilder
Returns the continuation spacing value between sections
License requirements: None.
CONTINUE - Static variable in class nxopen.menubar.MenuBarManager.CallbackStatus
Continue performing the menu item's actions.
CONTINUE_DIALOG - Static variable in class nxopen.uistyler.DialogState
Continue the dialog
continueIfExamineGeomFails - Variable in class nxopen.uf.UFModl.CompareOptions
continueProcessing() - Method in interface nxopen.drafting.DrawingAutomationWizard
Returns the flag denoting whether or not to create the booklet in the current session
License requirements: None.
continueZoneIndexingAcrossSheets() - Method in interface nxopen.drawings.SheetZoneSettingsBuilder
Returns the continue zone indexing across sheets
License requirements: None.
continuity() - Method in interface nxopen.features.AestheticFaceBlendBuilder
continuity() - Method in interface nxopen.features.BlendCornerBuilder
Returns the continuity type
License requirements: None.
continuity - Variable in class nxopen.features.FillHoleBuilder.BorderContinuity
continuity() - Method in interface nxopen.features.NSidedSurfaceBuilder
Returns the continuity
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
CONTINUITY - Static variable in class nxopen.features.SectionSurfaceBuilder.SectionMethodFilletBridgeEnum
Deprecated.
continuity options
CONTINUITY - Static variable in class nxopen.features.SectionSurfaceBuilderEx.SectionMethodFilletBridgeType
continuity options
continuity() - Method in interface nxopen.geometricutilities.BridgeCurveConnectivity
Returns the continuity level
License requirements: None.
Continuity - Interface in nxopen.geometricutilities
Represents a
Continuity
Allows user to specify continuity constraint surface construction.
Continuity type.
continuityType() - Method in interface nxopen.features.subdivision.SubdivisionSetContinuityBuilder
Returns the continuity.
continuityType() - Method in interface nxopen.geometricutilities.Continuity
Returns the continuity type.
continuityTypeOption() - Method in interface nxopen.features.MeshTransformerBuilder
Returns the continuity type option
License requirements: None.
continuityUMax() - Method in interface nxopen.features.StudioXformBuilder
continuityUMax() - Method in interface nxopen.features.StudioXformBuilderEx
Returns the continuity at U maximum
License requirements: None.
continuityUMin() - Method in interface nxopen.features.StudioXformBuilder
continuityUMin() - Method in interface nxopen.features.StudioXformBuilderEx
Returns the continuity at U minimum
License requirements: None.
continuityVMax() - Method in interface nxopen.features.StudioXformBuilder
continuityVMax() - Method in interface nxopen.features.StudioXformBuilderEx
Returns the continuity at V maximum
License requirements: None.
continuityVMin() - Method in interface nxopen.features.StudioXformBuilder
continuityVMin() - Method in interface nxopen.features.StudioXformBuilderEx
Returns the continuity at V minimum
License requirements: None.
CONTINUOUS - Static variable in class nxopen.preferences.RoutingPath.ChainMethod
Tangents must match at each connection
CONTINUOUS - Static variable in class nxopen.preferences.SessionModeling.DynamicUpdateType
Indicates that Dynamic Update type is continuous
CONTINUOUS - Static variable in class nxopen.weld.WeldArcMethod
creates a single solid
CONTINUOUS_CUTS - Static variable in class nxopen.cam.CutParametersCutConnectionTypes
Cut connection: Continuous Cuts
continuousAutoDimensioning() - Method in interface nxopen.preferences.SessionSketch
Returns the continuous auto dimensioning state in sketch preferences.
continuousAutoDimensioningSetting() - Method in interface nxopen.preferences.SketchPreferences
Returns the option to set continuous auto dimensioning in a sketch on or off.
continuousCut() - Method in interface nxopen.cam.CylindricalMillingCutParameters
Returns the continuous cut
License requirements: None.
continuousPulse - Variable in class nxopen.cae.Post.AnimationStreamline
CONTOUR - Static variable in class nxopen.cam.DmAmBuilder.AmCutTraversalTypes
Zig with Contour
CONTOUR - Static variable in class nxopen.cam.TurnRoughFinishTestCut.CutTypes
Test Cut Type: Contour
CONTOUR_FLANGE - Static variable in class nxopen.tooling.UniversalUnformBuilder.BendTypes
contour flange type
CONTOUR_POSITION - Static variable in class nxopen.cam.TeachmodeProfileMoveBuilder.StartStopPositionMethods
Use end point of last contouring
CONTOUR_PROFILE - Static variable in class nxopen.cam.SurfaceContourBuilder.DriveMethodTypes
Contour Profile
CONTOUR_Z - Static variable in class nxopen.cam.CutStrategy.Types
Cut strategy: Contour Zig
CONTOUR_ZZ - Static variable in class nxopen.cam.CutStrategy.Types
Cut strategy: Ramping Zig-Zag
ContourAngle - Interface in nxopen.cam
contourCurves - Variable in class nxopen.uf.UFSmd.FpPrefs
contourDepth() - Method in interface nxopen.weld.PlugSlotBuilder
Returns the contour depth
License requirements: None.
contourDiameterAngle() - Method in interface nxopen.cam.TurnCutParameters
Returns the contour diameter angle
License requirements: None.
contourFaceAngle() - Method in interface nxopen.cam.TurnCutParameters
Returns the contour face angle
License requirements: None.
ContourFlange - Interface in nxopen.features
Represents a Contour Flange feature
To create or edit an instance of this class, use
ContourFlangeBuilder
Created in NX5.0.0
Represents a Contour Flange feature builder.
ContourFlangeBuilder.SectionSideOptions - Class in nxopen.features.sheetmetal
This enum represents the side of the section in which material is created.
ContourFlangeBuilder.SweepSideOptions - Class in nxopen.features.sheetmetal
This enum represents the side in which the contour flange will be swept.
ContourFlangeBuilder.SweepTypeOptions - Class in nxopen.features.sheetmetal
This enum represents the sweep type of the contour flange
contourHeight() - Method in interface nxopen.weld.FilletBuilder
Returns the linear dimension contour height.
contourHeight() - Method in interface nxopen.weld.PlugSlotBuilder
Returns the contour height needed for cap
License requirements: None.
contourHeight() - Method in interface nxopen.weld.WeldGrooveBuilder
Returns the contour height
License requirements: ugweld ("UG WELD")
.
contouringLevel() - Method in interface nxopen.cae.xyplot.BaseGridLayoutStyleSetting
Returns the contouring level.
contouringRange() - Method in interface nxopen.cae.xyplot.BaseGridLayoutStyleSetting
Returns the option to show contour range either on the border or the faces of the grid.
ContouringRange - Class in nxopen.cae.xyplot
Represents the contouring range
contourLevelAngle() - Method in interface nxopen.cam.TurnCutParameters
Returns the contour level angle
License requirements: None.
contourLines - Variable in class nxopen.uf.UFModl.GflangeOptionsData
contourLines - Variable in class nxopen.uf.UFSmd.AskContourLinesData
contourRefinement() - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder
Returns the contour refinement level, in the range 0-6.
CONTOURS - Static variable in class nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder.DisplayTypes
Contours
contourShape() - Method in interface nxopen.weld.GrooveBuilder
contourShift() - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder
Returns the starting contour shift or bias value, as % of the standard contour interval.
contourSteepAngle() - Method in interface nxopen.cam.TurnCutParameters
Returns the contour steep angle
License requirements: None.
contourSymbol() - Method in interface nxopen.annotations.LineWeldDataBuilder
Returns the supplementary contour weld symbols that identify the shape of the weld surface or execution of a weld for both top and bottom of the reference line
License requirements: None.
contourType - Variable in class nxopen.uf.UFDrf.WeldSymInfo
contourType() - Method in interface nxopen.weld.FilletBuilder
Returns the contour.
contourType() - Method in interface nxopen.weld.PlugSlotBuilder
Returns the contour type
License requirements: None.
contourType() - Method in interface nxopen.weld.WeldGrooveBuilder
Returns the contour type
License requirements: ugweld ("UG WELD")
.
CONTRA_ALIGN - Static variable in class nxopen.positioning.Constraint.Alignment
Directions are opposite
contributorNumber() - Method in interface nxopen.cae.responsesimulation.FrequencyDefinition
Returns the number of contributors.
CONTROL - Static variable in class nxopen.annotations.AssociativityPointOption
Control point
CONTROL - Static variable in class nxopen.motion.MotionSolutionBuilder.AnalysisTypes
CONTROL - Static variable in class nxopen.tooling.BurringInsertBuilder.ParentTypes
use PDW project's control part as parent part
CONTROL - Static variable in class nxopen.tooling.DieBaseBuilder.ParentNodeOpt
use PDW project's control part as parent part
CONTROL - Static variable in class nxopen.tooling.FormingInsertBuilder.ParentTypes
use PDW project's control part as parent part
CONTROL_POINT_POINT_TYPE - Static variable in class nxopen.uf.UFDrf.ObjectAssocPointType
controlCurve() - Method in interface nxopen.features.GlobalShapingBuilder
Returns the curve control
License requirements: None.
controlDataFile() - Method in interface nxopen.tooling.MotionSimulationBuilder
Returns the constrol data to import to kinematic model
License requirements: None.
CONTROLLED - Static variable in class nxopen.annotations.MasterSymbolListItemBuilder.TextTypes
CONTROLLED - Static variable in class nxopen.annotations.TextType
Specifies the text defined in the master symbol as enumerated
set of values, one of which can be selected in the custom symbol.
controlled - Variable in class nxopen.assemblies.ComponentAssembly.SuppressedStateData
Is the suppression state controlled at the level of arrangement?
controlledNoteTitle() - Method in interface nxopen.annotations.BaseCustomSymbolBuilder
Returns the controlled note title
License requirements: None.
CONTROLLER - Static variable in class nxopen.cae.optimization.TBSOptimizationSolutionBuilder.StrategyType
uses controller strategy to run optimization
controlMethod() - Method in interface nxopen.weld.DatumCommonBuilder
Returns the control method.
controlParameters() - Method in interface nxopen.cae.optimization.TBSOptimizationSolution
Returns the parameters to control optimization
License requirements: None.
controlPoint() - Method in interface nxopen.features.FlowBlendBuilder
Returns the control point object
License requirements: None.
ControlPoint - Interface in nxopen.routing
Routing Control Points define a position in space, and are used to determine connections
from segments to segments, and segments to ports.
controlpoint - Variable in class nxopen.routing.ControlPointCollection.CreateControlPointData
controlPoint() - Method in interface nxopen.SketchConicBuilder
Returns the control point
License requirements: None.
controlPoint() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
Returns the control point for the copy operation.
ControlPoint.DefinedStatus - Class in nxopen.routing
ControlPointCollection - Interface in nxopen.routing
ControlPointCollection.CheckExisting - Class in nxopen.routing
ControlPointCollection.CreateControlPointData - Class in nxopen.routing
ControlPointCollection.FoundExisting - Class in nxopen.routing
controlPointEnd() - Method in interface nxopen.routing.IPath
Returns the end ControlPoint for an IPath object.
controlPoints() - Method in interface nxopen.routing.RouteManager
ControlPoint collection .
controlPointStart() - Method in interface nxopen.routing.IPath
Returns the start ControlPoint for an IPath object.
controlPointType() - Method in interface nxopen.cam.HoleMakingBuilder
Returns the control point type
License requirements: None.
controlPoleManager() - Method in interface nxopen.features.MatchEdgeBuilder
Returns the control pole manager
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
controlPoleManager() - Method in interface nxopen.features.StudioXformBuilder
controlPoleManager() - Method in interface nxopen.features.StudioXformBuilderEx
Returns the control pole manager
License requirements: None.
controlPoleManager() - Method in interface nxopen.geometricutilities.MovePoleBuilder
Returns the control pole manager
License requirements: None.
ControlPoleManagerData - Interface in nxopen.geometricutilities
This class manages the control poles for a set of surfaces or curves.
ControlPoleManagerData.PolesData - Class in nxopen.geometricutilities
controlPtDisplay - Variable in class nxopen.uf.UFPatt.AskParamsData
controlRadius() - Method in interface nxopen.features.ReplaceBlendBuilder
Returns the control radius to replace blend.
controlRegion() - Method in interface nxopen.features.SectionSurfaceBuilder
controlRegion() - Method in interface nxopen.features.SectionSurfaceBuilderEx
Returns the control region.
controlSheetSelection() - Method in interface nxopen.features.GlobalShapingBuilder
Returns the control face selection
License requirements: None.
controlSurface() - Method in interface nxopen.features.OvercrownBuilder
Returns the Control Surface when the Global Shaping Operator control is by
Function.
controlTextIndex() - Method in interface nxopen.annotations.CustomSymbolTextData
controlType() - Method in interface nxopen.cam.LeadAngles
Returns the lead angle control type
License requirements: None.
conType - Variable in class nxopen.uf.UFSket.ReadGeometricConstraintData
CONVECTION_COEFFICIENT - Static variable in class nxopen.cae.Result.Quantity
CONVECTIVE_FLUX - Static variable in class nxopen.cae.Result.Quantity
CONVENTIONAL - Static variable in class nxopen.cam.AreaMillingContainment.CutDirectionTypes
Conventional
CONVENTIONAL - Static variable in class nxopen.cam.CylinderMillingCutParameters.CutDirectionTypes
Conventional cut
CONVENTIONAL - Static variable in class nxopen.cam.DmRotaryFloorFinishBuilder.CutDirType
conventional
CONVENTIONAL - Static variable in class nxopen.cam.FeatureMillingCutParameters.CuttingDirectionTypes
Conventional cut
CONVENTIONAL - Static variable in class nxopen.cam.FlowCutSteepContainment.CutDirectionTypes
Conventional
CONVENTIONAL - Static variable in class nxopen.cam.ThreadMillingCutParameters.CutDirectionTypes
Conventional cut
convergenceSpeedType() - Method in interface nxopen.optimization.OptimizationBuilder
Returns the convergence speed type
License requirements: None.
convert(FacetedBody, FacetedBodyCollection.Type) - Method in interface nxopen.facet.FacetedBodyCollection
Converts the internal representation of this faceted body to the specified type.
CONVERT - Static variable in class nxopen.tooling.DirectUnfoldBuilder.Types
the direct unfold type of convert to Sheet Metal
convert(Unit, Unit, double) - Method in interface nxopen.UnitCollection
Convert a value from one unit of measure to another
License requirements: None.
convertColorNumberToRGBValue(int) - Method in interface nxopen.preferences.PartObject
Converts color number to RGB constituents.
convertConicToGen(UFCurve.Conic) - Method in interface nxopen.uf.UFCurve
convertConicToStd(UFCurve.Genconic) - Method in interface nxopen.uf.UFCurve
ConvertConicToStdData() - Constructor for class nxopen.uf.UFCurve.ConvertConicToStdData
convertCustomWidths(UFPlot.Units, UFCgm.CustomWidths) - Method in interface nxopen.uf.UFPlot
ConvertEccentricLinearToLinear - Class in nxopen.routing
Option to query if an existing
ISegment
is a eccentric segment.
Is line segment eccentric converted to line segment?
convertEccentricSegment() - Method in interface nxopen.routing.EditLineSegmentBuilder
Returns the conversion flag.
CONVERTED - Static variable in class nxopen.routing.ConvertEccentricLinearToLinear
Is converted Eccentric linear to linear
CONVERTED - Static variable in class nxopen.routing.ConvertLinearToEccentricLinear
Is converted linear to Eccentric linear
convertedstraindata - Variable in class nxopen.MaterialUtilities.ConvertStressStrainData
the output strain array
convertedstressdata - Variable in class nxopen.MaterialUtilities.ConvertStressStrainData
the output stress array
ConvertFacetBodyBuilder - Interface in nxopen.facet
ConvertFacetBodyBuilder.OutputTypes - Class in nxopen.facet
These options represent the type of output body
ConvertFeatureGroupsToModulesBuilder - Interface in nxopen.geometricutilities
convertFile(String, UFPlot.Format, String) - Method in interface nxopen.uf.UFPlot
convertFileNameToCli(String) - Method in interface nxopen.uf.UFUgmgr
convertFrecToBuilderData(NXObject) - Method in interface nxopen.tooling.CreateBoxBuilder
Convert feature record data to builder.
ConvertFromMCDBuilder - Interface in nxopen.cam
ConvertFromMCDBuilder.MachineTypes - Class in nxopen.cam
Represents the machine type option.
ConvertFromMCDBuilder.PocketLocationTypes - Class in nxopen.cam
Represents the pocket location option.
ConvertFromMTBBuilder - Interface in nxopen.mechatronics
convertGDT() - Method in interface nxopen.NXTo2dCreator
Returns the convert gdt - if set to true then GDT will convertd as group
License requirements: None.
convertLegacy() - Method in interface nxopen.weld.CustomManager
Method to convert all WeldPtParms class welds to the Weld_PointMarkPoint class
License requirements: None.
convertLegacyViewsToLightweight(DraftingView[]) - Method in interface nxopen.drawings.DraftingViewCollection
Converts legacy views to lightweight.
ConvertLinearToEccentricLinear - Class in nxopen.routing
Option to query if an existing
ISegment
is a eccentric segment.
Is line segment converted to eccentric line segment?
convertMatingConditions() - Method in interface nxopen.positioning.MatingConverter
Converts Mating Conditions to Assembly Constraints according to the
properties defined on this
MatingConverter
object.
Converts the selected objects to acceptable one and add to the selection list.
convertObjectsToRemove(DisplayableObject[]) - Method in interface nxopen.features.shipdesign.SplitStandardPartBuilder
Converts the selected objects to acceptable one and remove it from the selection list.
convertOdbFile(String, String) - Method in interface nxopen.cae.ResultManager
Convert older version of ODB file to currently supported version
License requirements: None.
convertOffsetPaths(OffsetPath) - Method in interface nxopen.routing.OffsetPathCollection
Converts an offset path into
Constraint
objects applied to the copied routing objects.
Converts an existing
Overstock to
Routing.Method#ENTIRE_SEGMENTS overstock.
Converts an existing
Overstock to
Routing.Method#INTERVAL overstock.
Converts an existing
Overstock to
Routing.Method#POINT_TO_POINT overstock.
Converts an existing
Overstock to
Routing.Method#POINT_AND_LENGTH overstock.
Converts parameters of the feature that owns selected xform object.
convertPreNX9CompoundWelds() - Method in interface nxopen.Part
Convert any existing pre-NX9 Compound Weld User Defined Objects to NX features.
convertPrev16Aligns(int, UFAssem.Prev16Align) - Method in interface nxopen.uf.UFAssem
ConvertPrev16AlignsData() - Constructor for class nxopen.uf.UFAssem.ConvertPrev16AlignsData
convertPrimaryTolerance() - Method in interface nxopen.annotations.UnitsStyleBuilder
Returns the convert primary tolerance option.
convertPrimaryToleranceToDualDimensionUnit() - Method in interface nxopen.annotations.UnitsFormatPreferences
Returns the flag indicating whether to convert the primary tolerance to dual dimension unit
License requirements: None.
convertPropUnits(UFWeight.Properties, UFWeight.UnitsType) - Method in interface nxopen.uf.UFWeight
convertReferenceGeometry(int, DisplayableObject) - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder
Converts the selected reference geometry.
convertRememberedMcs() - Method in interface nxopen.assemblies.ComponentAssembly
Converts all remembered mating constraints in the part of this assembly to remembered
assembly constraints
License requirements: assemblies ("ASSEMBLIES MODULE")
.
convertRGBValueToColorNumber(ViewVisualizationSpecialEffects.ColorRGB) - Method in interface nxopen.preferences.PartObject
Converts RGB color constituents to color number.
convertSlotDimensionAssociativity() - Method in interface nxopen.annotations.ISlotDimension
Convert this dimension's associativity if it is a slot dimension.
convertSplineSegments() - Method in interface nxopen.routing.RouteManager
Converts all of the spline segments in this part from the pre-NX9 data model
to the NX9 data model.
ConvertSplineSegmentsData() - Constructor for class nxopen.routing.RouteManager.ConvertSplineSegmentsData
convertStressStrainData(double[], double[], double, double, MaterialUtilities.StressStrainData, MaterialUtilities.StressStrainData) - Method in interface nxopen.MaterialUtilities
Convert stress strain data between the four types EngineeringStressEngineeringStrain,
EngineeringStressEngineeringPlasticStrain, TrueStressLogStrain and TrueStressLogPlasticStrain.
ConvertStressStrainData() - Constructor for class nxopen.MaterialUtilities.ConvertStressStrainData
convertToAreaTarget() - Method in interface nxopen.annotations.DraftingDatumTarget
Converts a datum target point, line, or non-rectangular area to a rectangular area.
convertToDraftingAreaTarget() - Method in interface nxopen.annotations.DraftingDatumTarget
Converts a drafting datum target point, line, or non-rectangular area to a drafting rectangular area.
convertToDraftingLineTarget() - Method in interface nxopen.annotations.DraftingDatumTarget
Converts a drafting datum target point or area to a drafting datum target line.
convertToDraftingPointTarget() - Method in interface nxopen.annotations.DraftingDatumTarget
Converts a drafting datum target line or area to a drafting datum target point.
convertToFixedDatum(Tag) - Method in interface nxopen.uf.UFModlFeatures
convertToFloatingFeatureGroups() - Method in interface nxopen.features.FeatureCollection
Converts sequential feature groups to floating feature groups
License requirements: solid_modeling ("SOLIDS MODELING")
.
ConvertToFromReferenceBuilder - Interface in nxopen
ConvertToFromReferenceBuilder.OutputType - Class in nxopen
Represents the output type.
convertToGdt(SimpleDraftingAid, boolean, LeaderBundle) - Method in interface nxopen.annotations.AnnotationManager
Converts a simple drafting aid into a GDT by creating a new GDT
using the text, origin, and preferences from the drafting aid.
convertToIdSymbol(SimpleDraftingAid, boolean, LeaderBundle) - Method in interface nxopen.annotations.AnnotationManager
Converts a simple drafting aid into an ID symbol by creating a new
ID symbol using the text, origin, and preferences from the drafting aid.
convertToLabel(SimpleDraftingAid, boolean, LeaderBundle) - Method in interface nxopen.annotations.AnnotationManager
Converts a simple drafting aid into a label by creating a new label
using the text, origin, and preferences from the drafting aid.
convertToLineTarget() - Method in interface nxopen.annotations.DraftingDatumTarget
Converts a datum target point or area to a datum target line.
convertToLineWeld(LineWeld, boolean, LeaderBundle) - Method in interface nxopen.annotations.AnnotationManager
Converts a simple drafting aid into a line weld by creating a new line weld
using the text, origin, and preferences from the drafting aid.
convertToLinkedBody() - Method in interface nxopen.features.Brep
Converts unparameterized feature to linked body
License requirements: solid_modeling ("SOLIDS MODELING")
.
convertToLinkedBody() - Method in interface nxopen.features.PromotionBuilder
Returns the flag denoting whether the Promotion feature will convert to linked body
License requirements: None.
convertToModel(Tag, Tag) - Method in interface nxopen.uf.UFView
convertToNewFeatureGroups() - Method in interface nxopen.features.FeatureCollection
convertToNonSpreadsheetTabnote(Tag) - Method in interface nxopen.uf.UFTabnot
convertToNote(SimpleDraftingAid, boolean) - Method in interface nxopen.annotations.AnnotationManager
Converts a simple drafting aid into a note by creating a new note
using the text, origin, and preferences from the drafting aid.
convertToNx10Spline(Spline) - Method in interface nxopen.Sketch
Convert the legacy splines to new NX10 splines.
convertToPointTarget() - Method in interface nxopen.annotations.DraftingDatumTarget
Converts a datum target line or area to a datum target point.
convertToReference() - Method in interface nxopen.SketchMakeSymmetricBuilder
Returns the function returns the flag to indicate if the centerline needs to be converted to reference
License requirements: None.
convertToReference() - Method in interface nxopen.SketchMirrorBuilder
Returns the flag to indicate if the centerline needs to be converted to reference
License requirements: None.
convertToReference() - Method in interface nxopen.SketchMirrorPatternBuilder
Returns the flag to indicate if the centerline needs to be converted to reference
License requirements: None.
convertToReference() - Method in interface nxopen.SketchOffsetBuilder
Returns the flag to indicate if the input curves needs to converted to reference
License requirements: None.
convertToSequentialFeatureGroups() - Method in interface nxopen.features.FeatureCollection
Converts floating feature groups to sequential feature groups
License requirements: solid_modeling ("SOLIDS MODELING")
.
convertToSew() - Method in interface nxopen.features.BooleanBuilder
Returns the convert to sew flag
License requirements: None.
ConvertToSheetmetal - Interface in nxopen.features
Represents a ConvertToSheetmetal feature
To create or edit an instance of this class, use
ConvertToSheetmetalBuilder
Created in NX5.0.0
This is the feature builder for the convert to sheetmetal feature.
ConvertToSheetmetalBuilder.BendReliefTypeOptions - Class in nxopen.features.sheetmetal
This enum represents the bend relief type.
convertToSmartPlane() - Method in interface nxopen.Plane
Set PLANE_parms to plane to make it smart plane
License requirements: None.
convertToStockAsComponents(ComponentName) - Method in interface nxopen.routing.StockCollection
convertToStockAsComponents(boolean, ComponentName) - Method in interface nxopen.routing.StockCollection
Converts a part file from Legacy Stock into Stock as Components.
convertToStockAsComponents(Tag, boolean, boolean, boolean) - Method in interface nxopen.uf.UFRoute
convertToView(Tag, Tag) - Method in interface nxopen.uf.UFView
convertUnitsOnModifiedParts - Variable in class nxopen.uf.UFAssem.AssemblyDeformPartData
convertUnitsOnReadOnlyModifiedParts - Variable in class nxopen.uf.UFAssem.AssemblyDeformPartData
convertValue(double, Tag, Tag) - Method in interface nxopen.uf.UFUnit
convertWorkPartAndLoadedChildrenOption() - Method in interface nxopen.routing.StockPartConverterBuilder
Returns the convert workpart and loaded children option.
CONVEX - Static variable in class nxopen.annotations.LineWeldDataBuilder.ContourSymbolType
CONVEX - Static variable in class nxopen.annotations.SupplementarySymbol
Specifies convex supplementary weld symbol
CONVEX - Static variable in class nxopen.features.LabelChamferBuilder.ChamferOrientType
CONVEX - Static variable in class nxopen.mechatronics.CollisionBodyBuilder.CollisionShapeTypes
Convex
CONVEX - Static variable in class nxopen.weld.FilletBuilder.EnumContour
CONVEX - Static variable in class nxopen.weld.PlugSlotBuilder.EnumContour
CONVEX - Static variable in class nxopen.weld.WeldGrooveBuilder.Contour
Convex
CONVEX_FIRST - Static variable in class nxopen.features.EdgeBlendBuilder.OrderOfBlending
Convex first
CONVEX_HULL - Static variable in class nxopen.cam.CutParametersSimplifyShapesTypes
convex hull
CONVEX_HULL - Static variable in class nxopen.sim.SinumerikCaSimplifyBodiesBuilder.ObjectToReplaceWithTypes
Convex Hull
convexComb(double, double[], double[]) - Method in interface nxopen.uf.UFVec2
convexComb(double, double[], double[]) - Method in interface nxopen.uf.UFVec3
convexConcaveY() - Method in interface nxopen.features.EdgeBlendBuilder
Returns the Special blend at convex / concave Y option
License requirements: None.
convexCorner() - Method in interface nxopen.cam.WedmGeomBuilder
Returns the convex_corner
License requirements: cam_base ("CAM BASE")
.
convexCorner() - Method in interface nxopen.cam.WedmOperationBuilder
Returns the convex_corner
License requirements: cam_base ("CAM BASE")
.
convexity() - Method in interface nxopen.features.EmbossRegion
Returns the convexity option
License requirements: None.
convexityDirection() - Method in interface nxopen.die.SpringbackCompensationBuilder
Returns the convexity direction.
convexityEnabled() - Method in interface nxopen.die.SpringbackCompensationBuilder
Returns the toggle that determines whether to constrain convexity
License requirements: None.
convexRadius() - Method in interface nxopen.facet.CurvatureBuilder
Returns the convex radius threshold
License requirements: None.
convexRadius() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
Returns the convex radius of the spherial mirror.
convLayoutData() - Method in interface nxopen.DxfdwgImporter
Returns the Import Layout data command - if set to true then Layout data will be imported
License requirements: None.
convLayouts() - Method in interface nxopen.DxfdwgImporter
Returns the ConvLayouts command - this will determine if all or selected layouts are translated
License requirements: None.
convModelData() - Method in interface nxopen.DxfdwgImporter
Returns the Import model data command - if set to true then Model data will be imported
License requirements: None.
COOLANT_TYPE_FLOOD - Static variable in class nxopen.uf.UFPath.CoolantType
COOLANT_TYPE_LAST_ELEMENT - Static variable in class nxopen.uf.UFPath.CoolantType
COOLANT_TYPE_MIST - Static variable in class nxopen.uf.UFPath.CoolantType
COOLANT_TYPE_ON - Static variable in class nxopen.uf.UFPath.CoolantType
COOLANT_TYPE_TAP - Static variable in class nxopen.uf.UFPath.CoolantType
coolantThrough() - Method in interface nxopen.cam.MillingToolBuilder
Returns the coolant through parameter
License requirements: None.
coolingConnect() - Method in interface nxopen.tooling.ToolingManager
Returns the CoolingConnectCollection instance belonging to this part .
CoolingConnectBuilder - Interface in nxopen.tooling
The builder class for Cooling connection which assists you
to create channel and connect it to other channels.
CoolingConnectCollection - Interface in nxopen.tooling
Creates a CoolingConnect Collection
To obtain an instance of this class, refer to
ToolingManager
Created in NX7.0.0
Returns the CoolingDefineChannelCollection instance belonging to this part .
CoolingDefineChannelBuilder - Interface in nxopen.tooling
The builder class for Cooling Define Channel which assists you
to create channels directly.
CoolingDefineChannelBuilder.ExtensionTypes - Class in nxopen.tooling
The extension types of channel
CoolingDefineChannelBuilder.TipEndTypes - Class in nxopen.tooling
The tip end types of channel
CoolingDefineChannelBuilder.Types - Class in nxopen.tooling
Types to specify how to assign attributes to the created body.
CoolingDefineChannelCollection - Interface in nxopen.tooling
Creates a CoolingDefineChannel Collection
To obtain an instance of this class, refer to
ToolingManager
Created in NX7.0.0
Returns the CoolingExtendCollection instance belonging to this part .
CoolingExtendBuilder - Interface in nxopen.tooling
The builder class for Channel Extend which assists you
to extend the channel.
CoolingExtendBuilder.TipEndTypes - Class in nxopen.tooling
The tip end types of channel
CoolingExtendCollection - Interface in nxopen.tooling
Creates a CoolingExtend Collection.
CoolingFittingData - Interface in nxopen.tooling
Represents the cooling fitting data in Add Channel Fitting Builder.
coolingPattern() - Method in interface nxopen.tooling.ToolingManager
Returns the CoolingPatternCollection instance belonging to this part .
CoolingPatternBuilder - Interface in nxopen.tooling
The builder class for Cooling pattern which assists you
to create channels with selected curves.
CoolingPatternCollection - Interface in nxopen.tooling
Creates a CoolingPattern Collection
To obtain an instance of this class, refer to
ToolingManager
Created in NX7.5.0
error allowed on coordinate values
coordinate() - Method in interface nxopen.cae.AfuHeaderId
Returns the coordinate of AFU Header Id
License requirements: nx_ftk ("NX Advanced Graphing")
.
coordinate() - Method in interface nxopen.drawings.StandardViewsBuilder
Returns the center coordinate
License requirements: None.
COORDINATE_NOTE - Static variable in class nxopen.annotations.PmiFilterByType.Type
Indicates a PMI coordinate note type
COORDINATE_NOTE_TYPE - Static variable in class nxopen.uf.UFPd.AttributeType
COORDINATE_SYSTEM - Static variable in class nxopen.cae.ShellEADBuilder.MaterialOrientationMethod
use a coordinate system to orient the material
COORDINATE_SYSTEM - Static variable in class nxopen.die.DieDirectionBuilder.DirectionType
Define a coordinate system (-Z) for the direction.
COORDINATE_SYSTEM - Static variable in class nxopen.die.DiePlaneBuilder.PlaneType
Define a coordinate system to specify the plane.
COORDINATE_SYSTEM - Static variable in class nxopen.positioning.ConstraintReference.GeometryType
Coordinate system
COORDINATE_SYSTEM - Static variable in class nxopen.preferences.PartObject.ObjectType
Coordinate System
COORDINATE_SYSTEM - Static variable in class nxopen.weld.JointmarkBuilder.OrientationMethodTypes
Use fixed csys instead of surface normals.
COORDINATE_TOLERANCE - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.TolType
Coordinate
COORDINATE_VALUE_OF_COORDINATE_SYSTEM_AXIS - Static variable in class nxopen.cae.PostGraphAlongPathBuilder.Xaxis
coordinateAxes() - Method in interface nxopen.sim.KinematicChain
Returns the coordinate axes name of the kinematic chain
License requirements: None.
CoordinateNote - Interface in nxopen.annotations
Represents a Coordinate Note
To create or edit an instance of this class, use
CoordinateNoteBuilder
Created in NX6.0.0
Returns the option indicating type of point coordinates
License requirements: None.
coordinatePlane() - Method in interface nxopen.annotations.LocatorDesignatorBuilder
Returns the coordinateplane
License requirements: None.
coordinatePlane() - Method in interface nxopen.sim.KinematicChain
Returns the coordinate plane type of the kinematic chain
License requirements: None.
coordinates() - Method in interface nxopen.cae.MeshPoint
Returns the coordinates of the point
License requirements: None.
coordinates() - Method in interface nxopen.cae.NodeElementInfoBuilder
Returns the coordinates
License requirements: None.
coordinates - Variable in class nxopen.cae.Post.StreamlineSeed
coordinates() - Method in interface nxopen.Point
Returns the coordinates of the point
License requirements: None.
coordinates() - Method in interface nxopen.SubdivisionMeshVertex
Returns the position of the vertex.
CoordinateSystem - Class in nxopen.cae.responsesimulation
Specifies the coordinate system
coordinateSystem() - Method in interface nxopen.cae.responsesimulation.ElementalFunctionEvaluationSettingBuilder
Returns the coordinate system
License requirements: nx_response_anlys ("NX Response Analysis")
.
coordinateSystem() - Method in interface nxopen.cae.responsesimulation.NodalFunctionEvaluationSettingBuilder
Returns the coordinate system
License requirements: nx_response_anlys ("NX Response Analysis")
.
coordinateSystem() - Method in interface nxopen.cae.responsesimulation.PrlResultsEvaluationSettingBuilder
Returns the coordinate system.
coordinateSystem - Variable in class nxopen.cae.Result.ResultParameters
Deprecated.
coordinateSystem() - Method in interface nxopen.cae.ShellEADBuilder
Returns the get coordinate system method gets the coordinate system for orienting by coordinate system
License requirements: nx_masterfem ("Finite Element Modeling")
.
CoordinateSystem - Interface in nxopen
Represents a coordinate system
This is an abstract class
.
coordinateSystem() - Method in interface nxopen.features.FitSurfaceBuilder
Returns the coordinate system
License requirements: None.
coordinateSystem() - Method in interface nxopen.features.HelixBuilder
Returns the coordinate system
License requirements: None.
coordinateSystem() - Method in interface nxopen.features.LawCurveBuilder
Returns the coordinate system
License requirements: None.
coordinateSystem() - Method in interface nxopen.features.shipdesign.PlatePreparationBuilder
Returns the coordinate system defining the origin as well as the X and Y axis for shrinkage.
coordinateSystem() - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder
Returns the coordinate system defining the origin as well as the X and Y axis for the templates.
coordinateSystem() - Method in interface nxopen.features.shipdesign.WeldCut2Builder
Returns the placement CSYS of the weld cut
The coordinate system is only used for the SpecifyCSYS placement method.
coordinateSystem() - Method in interface nxopen.geometricutilities.RectangularFrameBuilder
Returns the coordinate system
License requirements: None.
coordinateSystem() - Method in interface nxopen.WCS
Returns the CartesianCoordinateSystem associated with the WCS
License requirements: None.
CoordinateSystem.DirectionsData - Class in nxopen
CoordinateSystemCollection - Interface in nxopen
coordinateSystemMatrix() - Method in interface nxopen.die.DieDirectionBuilder
Returns the coordinate system matrix
License requirements: None.
coordinateSystemMatrix() - Method in interface nxopen.die.DiePlaneBuilder
Returns the coordinate system matrix
License requirements: None.
coordinateSystemOffset() - Method in interface nxopen.cae.SolverAppendOption
Returns the coordinate system offset
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
coordinateSystemOrigin() - Method in interface nxopen.die.DieDirectionBuilder
Returns the coordinate system origin
License requirements: None.
coordinateSystemOrigin() - Method in interface nxopen.die.DiePlaneBuilder
Returns the coordinate system origin
License requirements: None.
coordinateSystems() - Method in interface nxopen.BasePart
Returns the CoordinateSystemCollection instance belonging to this part .
coordinateSystemType() - Method in interface nxopen.motion.GraphBuilder
Returns the csystype
License requirements: mechanisms ("MECHANISMS")
.
coordinateX() - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder
Returns the x coordinate of wheel center point.
coordinateX() - Method in interface nxopen.features.vehicledesign.BaseDataWheelBuilder
Returns the x coordinate of right wheel center point or attachment point.
coordinateY() - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder
Returns the y coordinate of wheel center point.
coordinateY() - Method in interface nxopen.features.vehicledesign.BaseDataWheelBuilder
Returns the y coordinate of right wheel center point or attachment point.
coordinateZ() - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder
Returns the z coordinate of wheel center point.
coordinateZ() - Method in interface nxopen.features.vehicledesign.BaseDataWheelBuilder
Returns the z coordinate of right wheel center point or attachment point.
coordinatingHoleParent() - Method in interface nxopen.die.DrawDiePunchBuilder
Returns the coordinating hole parent builder of the draw die punch.
COORDS - Static variable in class nxopen.cae.FreeBodyResultsBuilder.LocationMethod
location is defined by coordinates
coords - Variable in class nxopen.uf.UFGdt.Point
coordSystem() - Method in interface nxopen.features.shipdesign.CustomBracketBuilder
Returns the placement csys of the bracket
License requirements: None.
coordSystem() - Method in interface nxopen.features.shipdesign.Cutout2Builder
Returns the coord system (only used for: SpecifyCSYS)
License requirements: None.
coordSystem() - Method in interface nxopen.features.shipdesign.PillarBuilder
Returns the coord system (only used with "JA_PILLAR_BUILDER_CreationMethod_SpecifyCsys" creation method).
coordSystem() - Method in interface nxopen.features.shipdesign.ShipCutoutBuilder
Returns the placement CSYS of the cutout.
coordSystem() - Method in interface nxopen.features.shipdesign.ShipEndCutBuilder
Returns the coord system
License requirements: None.
coordSystem() - Method in interface nxopen.features.shipdesign.WeldCutBuilder
Returns the placement CSYS of the weld cut
The coordinate system is only used for the SpecifyCSYS placement method.
coordSystem() - Method in interface nxopen.fields.SpatialMapBuilder
Returns the csys
License requirements: None.
coordSystem() - Method in interface nxopen.sim.SinumerikCaSimplifyBodiesBuilder
Returns the coordinate system
License requirements: None.
coordtol - Variable in class nxopen.cae.Post.ASCIIDiffTolerances
absolute tolerance on coordinate values
COPE - Static variable in class nxopen.preferences.RoutingPath.AllowedCornerType
UF_ROUTE_AV_CORNERS_COPE
COPE - Static variable in class nxopen.routing.Corner.Type
Cope corner.
COPE - Static variable in class nxopen.routing.CornerTypeBuilder.Type
CopeCorner - Interface in nxopen.routing
The cope corner is a corner that trims stocks at a junction.
CopeCornerBuilder - Interface in nxopen.routing
CopeCornerCollection - Interface in nxopen.routing
copeCorners() - Method in interface nxopen.routing.RouteManager
CopeCorner collection .
copiedFeature() - Method in interface nxopen.features.UserDefinedFeatureCopyEvent
Returns the feature in the destination part
License requirements: None.
copiedFeature() - Method in interface nxopen.features.UserDefinedFeatureCreateEvent
Returns the feature in the destination part
License requirements: None.
copiedObject - Variable in class nxopen.Sketch.CopyObjectData
copies() - Method in interface nxopen.PlotBuilder
Returns the number of copies to be plotted.
copies() - Method in interface nxopen.PrintBuilder
Returns the number of copies.
copies - Variable in class nxopen.uf.UFTrns.TransformObjectsData
COPIOUS_DATA - Static variable in class nxopen.IgesCreator.CrossHatchMapEnum
map cross hatch as copious data
copiousData() - Method in interface nxopen.IgesImporter
Returns the copious data mapping
License requirements: None.
Coplanar - Interface in nxopen.features
Represents a Coplanar feature
To create or edit an instance of this class, use
CoplanarBuilder
Created in NX6.0.0
Returns a value that indicates whether coplanar axes relation recognition is enabled
License requirements: None.
CoplanarBuilder - Interface in nxopen.features
coplanarEnabled() - Method in interface nxopen.features.FaceRecognitionBuilder
Returns a value that indicates whether coplanar relation recognition is enabled
License requirements: None.
coplanarThreshold() - Method in interface nxopen.cae.FluidDomainBuilder
Returns the coplanar decimation threshold
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")
.
COPPER - Static variable in class nxopen.tooling.ElectrodeBlankBuilder.BlankMaterial
the material of the blank is copper
copy() - Method in interface nxopen.annotations.PmiFilter
Creates a copy of the PMI filter
License requirements: geometric_tol ("GDT")
.
copy(String, ClearanceSet.CopyMode) - Method in interface nxopen.assemblies.ClearanceSet
Makes a copy of a dataset.
copy(Explosion) - Method in interface nxopen.assemblies.Explosion
Copies the component transformations in the source explosion onto the destination explosion.
copy(CaeRegion) - Method in interface nxopen.cae.CaeRegionCollection
Copies a CAE.CaeRegion
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX7.0.0
copy(Function, String) - Method in interface nxopen.cae.FunctionCollection
Copies a
Function in the Scenario database of Motion Simulation and
Advanced Simulation.
Copies a Load Recipe with all attributes and add it to the collection.
COPY - Static variable in class nxopen.cam.InspectionOperationTransformBuilder.Result
copy
copy(int[]) - Method in interface nxopen.cam.ObjectContainer
Copy CAM Objects
License requirements: None.
COPY - Static variable in class nxopen.cam.OperationTransformBuilder.Result
copy
COPY - Static variable in class nxopen.drafting.CutCopyPasteBuilder.TypeOperation
Copy type
copy(FacetedBody, Part, FacetedBodyCollection.Type) - Method in interface nxopen.facet.FacetedBodyCollection
Copies a faceted body and optionally changes the internal representation to the given type
(This is only valid for JT to NX copy)
License requirements: None.
copy() - Method in interface nxopen.features.MoveFaceBuilder
Returns the copy option for move face, don't use it until nx502
License requirements: None.
copy(NXObject) - Method in interface nxopen.PhysicalMaterial
Creates new (copied) material with same properties as the original material.
copy(String, String, String, String) - Method in interface nxopen.RuleManager
Copy a dynamic child or attribute rule.
COPY - Static variable in class nxopen.tooling.InsertAuxiliaryBuilder.DesignToolOption
copy
COPY - Static variable in class nxopen.tooling.LayoutRepositionBuilder.Type
Copy type
COPY - Static variable in class nxopen.tooling.ReliefDesignBuilder.Types
Copy operation
copy - Variable in class nxopen.uf.UFClone.CopyNmOpt
copy(UFVariant) - Method in interface nxopen.uf.UFEval
copy(double[]) - Method in interface nxopen.uf.UFMtx2
copy(double[]) - Method in interface nxopen.uf.UFMtx3
copy(double[]) - Method in interface nxopen.uf.UFMtx4
copy(double[]) - Method in interface nxopen.uf.UFVec2
copy(double[]) - Method in interface nxopen.uf.UFVec3
copy(double[]) - Method in interface nxopen.uf.UFVec4
COPY_AND_PROJECT - Static variable in class nxopen.cae.NodeProjectBuilder.NodeProjectTypes
copy and project
COPY_ANNOTATION - Static variable in class nxopen.drawings.DraftingViewCollection.ViewCopyAnnotOption
copy annotation
COPY_ASSEMBLY_ONLY - Static variable in class nxopen.assemblies.MakeUniquePartBuilder.Option
COPY_BLANK - Static variable in class nxopen.tooling.BlankLayoutBuilder.Types
the type of copy blank
COPY_CURVE - Static variable in class nxopen.drawings.BrokenViewBuilder.BreakLineStyle
Copy of the existing curve
COPY_CURVE - Static variable in class nxopen.drawings.ViewBreakBuilder.Viewbreaklinestyle
COPY_DISPLAY_REASON - Static variable in class nxopen.uf.UFCgm.ExportReason
COPY_EXP_DEEPLY - Static variable in class nxopen.uf.UFPart.ExportExpMode
COPY_EXP_SHALLOWLY - Static variable in class nxopen.uf.UFPart.ExportExpMode
COPY_ORIGINAL - Static variable in class nxopen.features.MoveObjectBuilder.MoveObjectResultOptions
copy objects
COPY_ORIGINAL - Static variable in class nxopen.routing.TransformPathBuilder.TransformOption
Copy the selected entities.
COPY_ORIGINAL_CURVE - Static variable in class nxopen.features.CopyPasteBuilder.ParentTransferOption
Prompt for New
COPY_PATH - Static variable in class nxopen.routing.DesignRuleViolationCollection.Reason
COPY_REFLECT - Static variable in class nxopen.cae.NodeReflectBuilder.CopyType
copy Reflect
COPY_ROTATE - Static variable in class nxopen.cae.NodeRotateBuilder.CopyType
copy rotate
COPY_TRANSLATE - Static variable in class nxopen.cae.NodeTranslateBuilder.CopyType
copy translate
copyAllSheetsToggle() - Method in interface nxopen.tooling.MWCopySheetsBuilder
Returns the indicator for copying all the parting and/or patched sheets in the parting part
License requirements: None.
copyAndMirror() - Method in interface nxopen.die.FillBuilder
Returns the copy and mirror setting of the area fill
License requirements: die_engineering ("DIE ENGINEERING")
.
copyAsGeneralGeometrySection(BeamSection) - Method in interface nxopen.cae.BeamSectionCollection
Copies a section to a new general geometry section
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
copyAsTableToPart(BasePart) - Method in interface nxopen.fields.Field
copyAttribute() - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder
The action to copy selected attributes
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
copyAttributeOnObjectCopy() - Method in interface nxopen.AttributeTemplatesBuilder
Returns the flag specifying whether the attribute should be copied when the object is copied.
copyAttributes(InspectionUVGridBuilder) - Method in interface nxopen.cam.InspectionUVGridBuilder
Copy point grid parameters
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
copyAttributes(Tag) - Method in interface nxopen.uf.UFWave
copyAttributesDefaultOrUserspecified() - Method in interface nxopen.routing.TransformPathBuilder
copyAttributesFromObject(NXObject) - Method in interface nxopen.weld.CharacteristicsBuilder
Copy the attributes that are on the object to the selection.
copyAttributesFromObjectForPaint(NXObject) - Method in interface nxopen.weld.CharacteristicsBuilder
Copies the attributes that are on the object to the selection for paint.
copyAttributesToObject(NXObject) - Method in interface nxopen.routing.AttributeHolder
Copies the Template Attributes of this object to a Routing Object
License requirements: routing_base ("Routing Basic")
.
copyAttributesToObjects(boolean, nxopen.features.FeatureBuilder) - Method in interface nxopen.features.shipdesign.ShipAttributeHolder
Copies attributes from proxy to feature objects
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
copyAttributesToPart(NXObject[]) - Method in interface nxopen.features.shipdesign.ShipAttributeHolder
copyAttributesToPart(boolean, nxopen.features.FeatureBuilder) - Method in interface nxopen.features.shipdesign.ShipAttributeHolder
Copies the attributes from proxy to part
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
CopyCageBuilder - Interface in nxopen.features.subdivision
copyCallback(UserDefinedFeatureCopyEvent) - Method in interface nxopen.features.UserDefinedFeatureClass.CopyCallback
Prototype for copy callbacks
License requirements: None.
copyChoices() - Method in interface nxopen.assemblies.MakeUniquePartBuilder
Returns the copy choices returned.
copyCollector() - Method in interface nxopen.ScCollector
Copy collector object
License requirements: None.
copyComponentAs(Tag, String, String, String, String, double[][]) - Method in interface nxopen.uf.UFWave
CopyComponentAsData() - Constructor for class nxopen.uf.UFWave.CopyComponentAsData
copyComponents(Component[]) - Method in interface nxopen.assemblies.ComponentAssembly
Given an array of components, creates copies of the components such that each copy is created
under the parent assembly of the original component.
copyConnectedParts() - Method in interface nxopen.routing.TransformPathBuilder
Returns the method indicates whether connected parts get copied or not.
copyConnectorParameters(NXObject, NXObject) - Method in interface nxopen.motion.MotionMethods
Copies the connector parameters
License requirements: mechanisms ("MECHANISMS")
.
copyConstraintPattern() - Method in interface nxopen.assemblies.ComponentPatternBuilder
Returns the copy constraint option.
copyCornerFlag() - Method in interface nxopen.routing.OffsetPath
Returns the copy corner flag for an offset object.
CopyCutBuilder - Interface in nxopen.gateway
CopyCutBuilder.Status - Class in nxopen.gateway
Status of Copy or Cut Operation
copyDataset(Tag, String, int) - Method in interface nxopen.uf.UFClear
copyDisplayInstanceObjects(Annotation[], View) - Method in interface nxopen.annotations.PmiManager
Creates copies of input PMI Display Instance objects in the part.
copyDofset(String, CaeDOFSet) - Method in interface nxopen.cae.CaeDOFSetCollection
Copy a DOFSet
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
copyDrapingResults(LaminateDrapingOrientation) - Method in interface nxopen.cae.LaminatePly
Copy draping results.
copyEventTrigger() - Method in interface nxopen.mechatronics.ObjectSourceBuilder
Returns the event option.
copyExplosion(Tag, Tag, Tag, Tag) - Method in interface nxopen.uf.UFAssem
CopyFace - Interface in nxopen.features
Represents a copy face feature
To create or edit an instance of this class, use
CopyFaceBuilder
Created in NX6.0.0
Represents a builder for a copy face feature.
copyFile(String, String) - Method in interface nxopen.RemoteUtilities
Copies a file.
copyFrame() - Method in interface nxopen.routing.FormboardFrame
Makes copy of the frame, and moves it to the work layer
License requirements: routing_harness ("Routing Harness")
.
copyFrom() - Method in interface nxopen.features.shipdesign.CopyObjectsBuilder
Returns the plane where the source objects to be copied from.
copyFromWeldCharacteristics(StandardPartItemBuilder) - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
Copies the weld characteristics from the specific standard part item builder.
copyInstance() - Method in interface nxopen.tooling.ElectrodeCopyBuilder
Returns the setting indicates the copy is a new part or an instance.
copyLibMatlToPart(NXObject) - Method in interface nxopen.PhysicalMaterial
Copies a library material to a part.
copyLibMatlToPart(NXObject, boolean) - Method in interface nxopen.PhysicalMaterial
Copies a library material to a part.
copyLimits(DieLimitsBuilder) - Method in interface nxopen.weld.WeldJointBuilder
Copy input limits to builder limits
License requirements: None.
copyMaterial(Tag) - Method in interface nxopen.uf.UFDisp
CopyMaterialData() - Constructor for class nxopen.uf.UFDisp.CopyMaterialData
copyMaterialFromLibrary(String, String) - Method in interface nxopen.PhysicalMaterialCollection
Creates an editable material (copy) in the part from a library material definition.
copyMaterialFromLibrary(String, String, boolean) - Method in interface nxopen.PhysicalMaterialCollection
Creates an editable material (copy) in the part from a library material definition.
copyMaterialItemRevision(String, String) - Method in interface nxopen.PhysicalMaterialCollection
Creates an editable material (copy) in the part from a Teamcenter material item revision.
CopyNmOpt() - Constructor for class nxopen.uf.UFClone.CopyNmOpt
CopyNmOpt(String, boolean) - Constructor for class nxopen.uf.UFClone.CopyNmOpt
copyNode(Node) - Method in interface nxopen.blockstyler.Tree
Copies the existing BlockStyler.Node .
copyNonActiveAttributesFromObject(NXObject) - Method in interface nxopen.weld.CharacteristicsBuilder
Copy the non active attributes that are on the object to the selection.
copyNonmasterOpts - Variable in class nxopen.uf.UFClone.GenLogOpts
CopyObjectData() - Constructor for class nxopen.Sketch.CopyObjectData
CopyObjectData(NXObject, NXObject) - Constructor for class nxopen.Sketch.CopyObjectData
Constructor for the CopyObjectData object.
copyObjects(Pmi[]) - Method in interface nxopen.annotations.PmiManager
Creates copies of input PMI objects in the part.
copyObjects(CAMSetup.View, CAMObject[], CAMObject, CAMSetup.Paste) - Method in interface nxopen.cam.CAMSetup
Copy objects
License requirements: cam_base ("CAM BASE")
.
copyObjects(CAMSetup.View, CAMObject[], CAMObject, CAMSetup.Paste) - Method in interface nxopen.cam.InspectionSetup
Copy objects
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
copyObjects(int, NXObject[]) - Method in interface nxopen.layer.LayerManager
Copies objects to the specified layer
Objects of class
Component ,
nxopen.DatumAxis ,
DatumPlane
Edge ,
Face ,
nxopen.features.Feature or
View ,
may not be copied.
Creates copies of input objects and constraints between these objects.
CopyObjectsBuilder - Interface in nxopen.features.shipdesign
CopyObjectsBuilder.Type - Class in nxopen.features.shipdesign
Type of Source Objects.
copyObjectsWithDimensionOutput(NXObject[]) - Method in interface nxopen.Sketch
Creates copies of input objects and constraints between these objects.
CopyObjectsWithDimensionOutputData() - Constructor for class nxopen.Sketch.CopyObjectsWithDimensionOutputData
copyObjectsWithReference(CAMSetup.View, CAMObject[], CAMObject, CAMSetup.Paste) - Method in interface nxopen.cam.CAMSetup
Copy objects with reference
License requirements: cam_base ("CAM BASE")
.
copyObjectsWithTracking(DisplayableObject[]) - Method in interface nxopen.Sketch
Creates copies of input objects and constraints between these objects.
copyOption() - Method in interface nxopen.cae.NodeProjectBuilder
Returns the copy option
License requirements: None.
copyOption() - Method in interface nxopen.cae.NodeReflectBuilder
Returns the copy option
License requirements: None.
copyOption() - Method in interface nxopen.cae.NodeRotateBuilder
Returns the copy option
License requirements: None.
copyOption() - Method in interface nxopen.cae.NodeTranslateBuilder
Returns the copy option
License requirements: None.
copyOriginalOption() - Method in interface nxopen.features.TrimAndExtendBuilder
Returns the copy original logical determines if the original body is modified or if a copy of the original is modified.
copyOverstock() - Method in interface nxopen.routing.RouteManager
Copy the overstock from subassembly to parent assembly.
CopyPasteBuilder - Interface in nxopen.features
CopyPasteBuilder.BuilderVersion - Class in nxopen.features
Types of version number
CopyPasteBuilder.ExpressionTransferOption - Class in nxopen.features
Types of expression transfer mode
CopyPasteBuilder.ParentSelectOption - Class in nxopen.features
Types of parent select option; Specifying smart object or selecting input for original parent
CopyPasteBuilder.ParentTransferOption - Class in nxopen.features
Types of parent transfer mode
copyPasteFeatures(Tag[], int, Tag[], Tag[], int, int, int) - Method in interface nxopen.uf.UFModeling
CopyPasteNewBuilder - Interface in nxopen.features.shipdesign
copyProps(UFWeight.Properties) - Method in interface nxopen.uf.UFWeight
copyRecords(String[], int[], String) - Method in interface nxopen.cae.AfuManager
Copy multiple AFU Data Records to an AFU file
License requirements: nx_ftk ("NX Advanced Graphing")
.
copyrecords(String) - Method in interface nxopen.cae.PostGraph
Copy the graph's records to AFU file
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
copyRelief() - Method in interface nxopen.tooling.ReliefDesignBuilder
Returns the relief used to copy.
copyResolveGeometry() - Method in interface nxopen.features.CopyPasteBuilder
Returns the copy resolving geometry toggle
License requirements: None.
copySection(Curve, boolean) - Method in interface nxopen.die.AddendumSectionBuilder
Copies addendum section in order to be pasted at another location.
copySections(DynamicSection[], boolean) - Method in interface nxopen.display.DynamicSectionCollection
Copies the specified dynamic sections in the part.
copySelectInsert() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
Returns the insert to be copied.
copySoPlane() - Method in interface nxopen.Plane
Creates an
Plane using a datum plane feature.
Returns the copy targets flag
License requirements: None.
copyThreads() - Method in interface nxopen.features.ExtractFaceBuilder
Returns the copy threads option
License requirements: None.
copyThreads() - Method in interface nxopen.features.GeomcopyBuilder
Returns the copy threads option
License requirements: None.
copyThreads() - Method in interface nxopen.features.MirrorBodyBuilder
Returns the copy threads option
License requirements: None.
copyThreads() - Method in interface nxopen.features.PatternGeometryBuilder
Returns the copy threads option.
copyThreads() - Method in interface nxopen.features.WaveInterfaceLinkerBuilder
Returns the copy threads
License requirements: None.
copyThreads() - Method in interface nxopen.features.WaveLinkBuilder
Returns the copy threads option
License requirements: None.
copyTo() - Method in interface nxopen.features.shipdesign.CopyObjectsBuilder
Returns the target objects where the source objects to be copied to.
copyToClipboard() - Method in interface nxopen.display.Camera
Copies the parameters of a camera to the operating system clipboard
License requirements: None.
copyTools() - Method in interface nxopen.features.BooleanBuilder
Returns the copy tools flag
License requirements: None.
copyToPart(BasePart) - Method in interface nxopen.fields.Field
copyToWeldCharacteristics(StandardPartItemBuilder) - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
Copies the weld characteristics to the specific standard part item builder.
copyView(Tag) - Method in interface nxopen.uf.UFDraw
copyView(Tag, String) - Method in interface nxopen.uf.UFView
CORDINATES_SYSTEM - Static variable in class nxopen.features.AssociativeArcBuilder.CenterReference
CSYS
CORDINATES_SYSTEM - Static variable in class nxopen.features.AssociativeArcBuilder.EndReference
CSYS
CORDINATES_SYSTEM - Static variable in class nxopen.features.AssociativeArcBuilder.MidReference
CSYS
CORDINATES_SYSTEM - Static variable in class nxopen.features.AssociativeArcBuilder.StartReference
CSYS
CORDINATES_SYSTEM - Static variable in class nxopen.features.AssociativeLineBuilder.EndReference
CSYS
CORDINATES_SYSTEM - Static variable in class nxopen.features.AssociativeLineBuilder.StartReference
CSYS
CORE - Static variable in class nxopen.tooling.MWDesignPartingSurfaceBuilder.TrimAndExtendFromRegionType
From core region
CORE_ONLY - Static variable in class nxopen.tooling.WorkpieceBuilder.WorkPieceType
The method adds the standards of cavity
CORE_REGION - Static variable in class nxopen.tooling.MWMoldedPartValidationBuilder.AssignToRegion
assign selected region faces to the Core region
coreDirection() - Method in interface nxopen.tooling.DieDesignLowerBinderBuilder
Returns the core direction determines the direction of Lower Binder
License requirements: ug_die_design ("Die Design")
.
coreDrawDieOption() - Method in interface nxopen.tooling.DieDesDrawDieBuilder
Returns the option to indicate whether to create core draw die.
coreDrawPunchOption() - Method in interface nxopen.tooling.DieDesDrawPunchBuilder
Returns the option to indicate whether to create core draw punch.
coreNode() - Method in interface nxopen.cae.SpiderElementBuilder
Returns a core node
License requirements: None.
coreOrientation() - Method in interface nxopen.die.HandlingCoreBuilder
Returns the plane of the core for deriving the rectangle and the start of the core.
coreOrientation() - Method in interface nxopen.die.HandlingCoreChildBuilder
Returns the core orientation of the handling core.
corePunch() - Method in interface nxopen.die.DrawDiePunchBuilder
Returns the core punch switch of the draw die punch casting, if true the punch will be cored, if false the punch will not be cored.
CORK_FELT - Static variable in class nxopen.annotations.AreaFillMaterial
Cork felt
CORK_FELT - Static variable in class nxopen.uf.UFDrf.AreaFillMaterial
CORKFELTFIBER - Static variable in class nxopen.uf.UFDrf.ValidMaterial
CORNER - Static variable in class nxopen.cam.NcmSubopBuilder.DefaultRegionStartTypes
start_at_corners
CORNER - Static variable in class nxopen.drawings.StandardViewsBuilder.Placement
CORNER - Static variable in class nxopen.drawings.TrimmingMarkStyleType
CORNER - Static variable in class nxopen.features.ExtensionBuilder.Types
CORNER - Static variable in class nxopen.features.shipdesign.CornerCutBuilder.CutOption
Create corner cut on selected corner point.
CORNER - Static variable in class nxopen.features.shipdesign.WeldCut2Builder.CreationMethod
CORNER - Static variable in class nxopen.features.shipdesign.WeldCutBuilder.CreationMethod
Corner - Interface in nxopen.routing
The Routing Corner is the abstract parent class of all other corner objects.
corner - Variable in class nxopen.routing.CornerCollection.RcpCornerInfoData
Corner associated
with this RCP
Corner joint.
Corner.Type - Class in nxopen.routing
Various Corner subtypes.
corner1() - Method in interface nxopen.cam.BoundaryTurnMemberSet
Returns the main corner 1
License requirements: None.
corner1() - Method in interface nxopen.weld.WeldFillBuilder
CORNER1U - Static variable in class nxopen.cam.DmRotaryFloorFinishBuilder.CutDirection
Corner 1 U direction
CORNER1U - Static variable in class nxopen.cam.DmSurfBuilder.CutDirection
Corner 1 U direction
CORNER1V - Static variable in class nxopen.cam.DmRotaryFloorFinishBuilder.CutDirection
Corner 1 V direction
CORNER1V - Static variable in class nxopen.cam.DmSurfBuilder.CutDirection
Corner 1 V direction
corner2() - Method in interface nxopen.cam.BoundaryTurnMemberSet
Returns the main corner 2
License requirements: None.
corner2() - Method in interface nxopen.weld.WeldFillBuilder
CORNER2U - Static variable in class nxopen.cam.DmRotaryFloorFinishBuilder.CutDirection
Corner 2 U direction
CORNER2U - Static variable in class nxopen.cam.DmSurfBuilder.CutDirection
Corner 2 U direction
CORNER2V - Static variable in class nxopen.cam.DmRotaryFloorFinishBuilder.CutDirection
Corner 2 V direction
CORNER2V - Static variable in class nxopen.cam.DmSurfBuilder.CutDirection
Corner 2 V direction
CORNER3U - Static variable in class nxopen.cam.DmRotaryFloorFinishBuilder.CutDirection
Corner 3 U direction
CORNER3U - Static variable in class nxopen.cam.DmSurfBuilder.CutDirection
Corner 3 U direction
CORNER3V - Static variable in class nxopen.cam.DmRotaryFloorFinishBuilder.CutDirection
Corner 3 V direction
CORNER3V - Static variable in class nxopen.cam.DmSurfBuilder.CutDirection
Corner 3 V direction
CORNER4U - Static variable in class nxopen.cam.DmRotaryFloorFinishBuilder.CutDirection
Corner 4 U direction
CORNER4U - Static variable in class nxopen.cam.DmSurfBuilder.CutDirection
Corner 4 U direction
CORNER4V - Static variable in class nxopen.cam.DmRotaryFloorFinishBuilder.CutDirection
Corner 4 V direction
CORNER4V - Static variable in class nxopen.cam.DmSurfBuilder.CutDirection
Corner 4 V direction
CORNER_AFTER_WALL - Static variable in class nxopen.cam.TurnGrooveCornerControl.CutSequenceTypes
Groove Corner Control cut sequence is Corner After Wall.
CORNER_POINT - Static variable in class nxopen.features.sheetmetal.ClosedCornerBuilder.OriginTypes
The relief origin will be at the corner point.
CORNER_POINT - Static variable in class nxopen.features.sheetmetal.ThreeBendCornerBuilder.OriginTypes
The relief origin will be at the corner point.
CORNER_WITH_WALL - Static variable in class nxopen.cam.TurnGrooveCornerControl.CutSequenceTypes
Groove Corner Control cut sequence is Corner With Wall.
cornerBumperAngle() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
Returns the angle that is used to determine the corner of the bumper.
cornerBumperAngleMarginal() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
Returns the marginal angle that is used to determine the corner of the bumper.
cornerBumperAngleSecondMarginal() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
Returns the second marginal angle that is used to determine the corner of the bumper.
cornerClearance() - Method in interface nxopen.features.BlendPocketBuilder
Returns the corner clearance defines the radius that the tool turns around at the concave wall corners.
CornerCollection - Interface in nxopen.routing
Represents a collection of
Corner objects.
Returns the color, font, and width of the corner joint curves.
cornerControl() - Method in interface nxopen.cam.MillCutParameters
Returns the corner control
License requirements: None.
CornerControlBuilder - Interface in nxopen.cam
Represents a FinishPasses Builder .
CornerControlBuilder.AdjustFeedRateOptions - Class in nxopen.cam
Available Adjust Feed Rate options
CornerControlBuilder.CornerControlMethods - Class in nxopen.cam
Available methods for Corner Control
CornerControlBuilder.SlowdownDistanceOptions - Class in nxopen.cam
Available Slowdown Distance options
CornerControlBuilder.SmoothCornersAtOptions - Class in nxopen.cam
Available options where Corner Smoothing should be applied
CornerControlBuilder.SmoothingOptions - Class in nxopen.cam
Available options for corner smoothing
cornerControlMethod() - Method in interface nxopen.cam.CornerControlBuilder
Returns the Corner Control Method
License requirements: None.
cornerControlNormal() - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder
Returns the corner control builder for normal corners
License requirements: None.
cornerControlShallow() - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder
Returns the corner control builder for shallow corners
License requirements: None.
CornerCut - Interface in nxopen.features.shipdesign
Represents a corner cut feature
To create or edit an instance of this class, use
CornerCutBuilder
Created in NX8.5.0
Builder used to create or edit a
CornerCut feature.
Represents the corner cut option.
CornerCutListItemBuilder - Interface in nxopen.features.shipdesign
CornerCutListItemBuilderList - Interface in nxopen.features.shipdesign
Represents a list of objects.
CornerData() - Constructor for class nxopen.cae.MappedMeshBuilder.CornerData
cornerDesign() - Method in interface nxopen.tooling.ToolingManager
Returns the CornerDesign instance belonging to this part .
CornerDesignBuilder - Interface in nxopen.tooling
CornerDesignBuilder.CornerTypeOpt - Class in nxopen.tooling
the corner types
CornerDesignBuilder.SelectFromOpt - Class in nxopen.tooling
the object selection options.
CornerDesignBuilder.Types - Class in nxopen.tooling
The corner design type.
CornerDesignCollection - Interface in nxopen.tooling
cornerFeedType() - Method in interface nxopen.cam.BoundaryTurnMemberCorner
Returns the corner feed rate type
License requirements: None.
cornerFillet() - Method in interface nxopen.tooling.BlendCurve3DBuilder
Returns the corners to blend.
cornerFindingOptions() - Method in interface nxopen.cam.MillCutParameters
Returns the Corner Finding Options
License requirements: None.
cornerGap - Variable in class nxopen.uf.UFNxsm.ClosedCornerData
cornerList() - Method in interface nxopen.features.shipdesign.CornerCutBuilder
Returns the list of corner points.
cornerLoops() - Method in interface nxopen.cam.PlanarOperationBuilder
Returns the corner loops value
License requirements: None.
cornerMaximumAngleBuilder() - Method in interface nxopen.cam.WedmGeomBuilder
Returns the corner_maximum_angle builder
License requirements: cam_base ("CAM BASE")
.
cornerMaximumAngleBuilder() - Method in interface nxopen.cam.WedmOperationBuilder
Returns the corner_maximum_angle builder
License requirements: cam_base ("CAM BASE")
.
cornerMethod() - Method in interface nxopen.features.DivideCurveBuilder
Returns the corner method
License requirements: None.
cornerMinimumAngleBuilder() - Method in interface nxopen.cam.WedmGeomBuilder
Returns the corner_minimum_angle builder
License requirements: cam_base ("CAM BASE")
.
cornerMinimumAngleBuilder() - Method in interface nxopen.cam.WedmOperationBuilder
Returns the corner_minimum_angle builder
License requirements: cam_base ("CAM BASE")
.
cornerNumber() - Method in interface nxopen.features.DivideCurveBuilder
Returns the corner number
License requirements: None.
cornerPoint() - Method in interface nxopen.features.DivideCurveBuilder
Returns the corner point
License requirements: None.
cornerPoint() - Method in interface nxopen.features.shipdesign.CornerCutBuilder
Returns the corner point.
cornerPoint() - Method in interface nxopen.features.shipdesign.CornerCutListItemBuilder
Returns the corner point as the cut location.
cornerPoint() - Method in interface nxopen.features.shipdesign.WeldCut2Builder
Returns the corner point as weld location.
CornerPointsData() - Constructor for class nxopen.DatumPlane.CornerPointsData
CornerPointsData() - Constructor for class nxopen.display.BoundedGridBuilder.CornerPointsData
CornerPointsData() - Constructor for class nxopen.display.ImageBaseBuilder.CornerPointsData
cornerRad - Variable in class nxopen.uf.UFModl.AskUSlotParmsData
cornerRad - Variable in class nxopen.uf.UFModlFeatures.AskRectPadParms1Data
cornerRad - Variable in class nxopen.uf.UFModlFeatures.AskRectPadParmsData
cornerRad - Variable in class nxopen.uf.UFModlFeatures.AskRectPocketParmsData
cornerRad - Variable in class nxopen.uf.UFModlFeatures.AskUGrooveParmsData
cornerRadius - Variable in class nxopen.cam.HolderSectionBuilder.AllParametersData
the corner radius
cornerRadius - Variable in class nxopen.cam.HolderSectionBuilder.Data
the corner radius
cornerRadius() - Method in interface nxopen.cam.LaserCutoutDefinition
Returns the Corner Radius
License requirements: None.
cornerRadius - Variable in class nxopen.cam.StepParamsBuilder.Data
the corner radius
cornerRadius() - Method in interface nxopen.cam.WireGuide
Returns the corner radius
License requirements: None.
cornerRadius() - Method in interface nxopen.features.sheetmetal.AeroLighteningCutoutBuilder
Returns the corner radius
License requirements: None.
cornerRadius() - Method in interface nxopen.features.sheetmetal.DrawnCutoutBuilder
Returns the Radius to be applied for rounding the sharp section corners
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
cornerRadius() - Method in interface nxopen.features.sheetmetal.GussetBuilder
Returns the corner radius
Only use this option to edit gussets created prior to NX10.
cornerRadius() - Method in interface nxopen.features.shipdesign.PenetrationAssociationBuilder
Returns the corner radius expression
License requirements: None.
cornerRadius() - Method in interface nxopen.features.shipdesign.PenetrationCutoutBuilder
Returns the corner radius expression
License requirements: None.
cornerRadius() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
Returns the corner radius expression
License requirements: None.
cornerRadiusBuilder() - Method in interface nxopen.cam.WedmGeomBuilder
Returns the corner_radius builder
License requirements: cam_base ("CAM BASE")
.
cornerRadiusBuilder() - Method in interface nxopen.cam.WedmOperationBuilder
Returns the corner_radius builder
License requirements: cam_base ("CAM BASE")
.
cornerRelief - Variable in class nxopen.uf.UFNxsm.BendOption
cornerReliefType() - Method in interface nxopen.features.sheetmetal.BendOptions
Returns the corner relief type.
cornerReliefType() - Method in interface nxopen.features.sheetmetal.EditCornerBuilder
Returns the corner relief type
License requirements: None.
cornerReliefType - Variable in class nxopen.uf.UFNxsm.BendOption
CORNERS - Static variable in class nxopen.cae.responsesimulation.DataLocation.Element
CORNERS - Static variable in class nxopen.cae.responsesimulation.ElementLocation
CORNERS - Static variable in class nxopen.cam.NCAssistantBuilder.AnalysisTypes
Analysis Type: Corners
CORNERS - Static variable in class nxopen.drawings.MultipleViewPlacementBuilder.Option
By Corners
corners() - Method in interface nxopen.routing.RouteManager
Corner collection .
CORNERS_FIRST - Static variable in class nxopen.cam.TurnGrooveCornerControl.CutSequenceTypes
Groove Corner Control cut sequence is Corners First.
CORNERS_FIRST_AND_LAST - Static variable in class nxopen.cam.TurnGrooveCornerControl.CutSequenceTypes
Groove Corner Control cut sequence is Corners First and Last.
CORNERS_LAST - Static variable in class nxopen.cam.TurnGrooveCornerControl.CutSequenceTypes
Groove Corner Control cut sequence is Corners Last.
cornerTargetFace() - Method in interface nxopen.features.shipdesign.WeldCut2Builder
Returns the corner target face.
CornerTreatmentBuilder - Interface in nxopen.features.sheetmetal
The CornerTreatmentBuilder class is used to manage a builder object for
a corner treatment in the flat solid and flat pattern dialogs.
CornerTreatmentBuilder.CornerTreatmentType - Class in nxopen.features.sheetmetal
Corner Treatment Type
cornerType() - Method in interface nxopen.cam.TurnGrooveCornerControl
Returns the Groove Corner Control corner type
License requirements: None.
cornerType - Variable in class nxopen.routing.CornerCollection.RcpCornerInfoData
Type of corner.
cornerType() - Method in interface nxopen.tooling.CornerDesignBuilder
Returns the corner type
License requirements: None.
cornerType - Variable in class nxopen.uf.UFModl.SmcornerData
CornerTypeBuilder - Interface in nxopen.routing
Contains setting for corner creation.
CornerTypeBuilder.BendMethods - Class in nxopen.routing
Methods available for bend creation.
CornerTypeBuilder.BendOptions - Class in nxopen.routing
CornerTypeBuilder.Type - Class in nxopen.routing
Defines the type of bend available for bend creation.Type of bend available are None,Miter
,Bend , S-bend and S-Elbow.
cornerZoneModification() - Method in interface nxopen.drawings.SheetZoneSettingsBuilder
Returns the corner zone modification
License requirements: None.
CORNFLOWER_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
CORRECTED - Static variable in class nxopen.die.OutputCurvesBuilder.TrimOutputCurveTypes
Corrected.
CORRECTED - Static variable in class nxopen.die.TrimLineDevelopmentBuilder.OutputMethodName
Corrected curve only
CorrelAlignmentBuilder - Interface in nxopen.cae
CorrelAlignmentBuilder.ReferencePt - Class in nxopen.cae
Specifies the data for the selected reference points
CorrelAlignmentBuilder.ScalingChoice - Class in nxopen.cae
the way the scaling factor is computed
CorrelApplyAlignmentFromBuilder - Interface in nxopen.cae
correlationType() - Method in interface nxopen.cae.responsesimulation.CSDExcitationBuilder
Returns the correlation type
License requirements: nx_response_anlys ("NX Response Analysis")
.
correlationValue() - Method in interface nxopen.cae.responsesimulation.CSDExcitationBuilder
Returns the correlation type
License requirements: nx_response_anlys ("NX Response Analysis")
.
CorrelBaseBuilder - Interface in nxopen.cae
Represents the abstract builder class for all objects defined in correl meta solution
This is an abstract class, and cannot be created.
CorrelFineTuneAlignmentBuilder - Interface in nxopen.cae
CorrelFineTuneAlignmentBuilder.AngleVector - Class in nxopen.cae
the angle vector enumeration for the alignment nudge
CorrelFineTuneAlignmentBuilder.DistanceVector - Class in nxopen.cae
the distance vector enumeration for the alignment nudge
CorrelManager - Interface in nxopen.cae
Represents the correl manager that contains all correl and pre-test objects
To obtain an instance of this class, refer to
SimSimulation
Created in NX6.0.0
Returns the correl manager belonging to this sim part .
correlMethod() - Method in interface nxopen.cae.ModelUpdateCorrelMethodBuilder
Returns the correlation method
License requirements: None.
CorrelModePairingBuilder - Interface in nxopen.cae
CorrelModePairingBuilder.Auto - Class in nxopen.cae
The automatic pairing rule type
CorrelShapemetrictype - Class in nxopen.cae
shape Metric Code
CorrelSolution - Interface in nxopen.cae
Represents a
CorrelSolution , which is a meta-solution used to compare results from two structural dynamics solutions
To create or edit an instance of this class, use
CorrelSolutionBuilder
Created in NX6.0.0
This is a manager to the CAE.CorrelSolution class.
CorrelSolutionBuilder.EnumDampingFrftype - Class in nxopen.cae
The damping type enum
CorrelSolutionCollection - Interface in nxopen.cae
Represents a collection of correl meta solution
To obtain an instance of this class, refer to
CorrelManager
Created in NX6.0.0
Returns the sampling time for co-simulation expression
License requirements: None.
cosimSimModel() - Method in interface nxopen.motion.RecurdynSolverProperty
Returns the simulink model for co-simulation
License requirements: None.
coSimulation() - Method in interface nxopen.mechatronics.PreferencesBuilder
Returns the co-simulation option
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
COULD_NOT_EXECUTE - Static variable in class nxopen.uf.UFConstants
COULD_NOT_OPEN - Static variable in class nxopen.assemblies.ComponentAssembly.OpenComponentStatus
The component could not be opened
couldNotClose() - Method in interface nxopen.PartReopenStatus
Returns whether or not the part was closed.
coulombFrictionOption() - Method in interface nxopen.motion.BodyContactAdams
Returns the coulomb friction option
License requirements: None.
coulombFrictionOption() - Method in interface nxopen.motion.BodyContactLms
Returns the coulomb friction option
License requirements: None.
coulombFrictionOption() - Method in interface nxopen.motion.BodyContactRecurdyn
Returns the coulomb friction option
License requirements: None.
count() - Method in interface nxopen.assemblies.DesignElementBuilder
Returns the number of design elements to be created.
COUNT - Static variable in class nxopen.cae.optimization.DAODesignVariableBuilder.Variable
Variable type count
COUNT - Static variable in class nxopen.cae.optimization.TBSBaseDesignVariableBuilder.GroupOperator
Determines the number of values of the selection area
count - Variable in class nxopen.uf.UFAssem.AskHiddenCompsData
count - Variable in class nxopen.uf.UFAssem.AskSearchDirectoriesData
count - Variable in class nxopen.uf.UFBrep.Mapping
count - Variable in class nxopen.uf.UFBrep.Options
count - Variable in class nxopen.uf.UFCam.OptAskClsfNamesData
count - Variable in class nxopen.uf.UFCam.OptAskDocNamesData
count - Variable in class nxopen.uf.UFCam.OptAskPostNamesData
count - Variable in class nxopen.uf.UFCam.OptAskSubtypesData
count - Variable in class nxopen.uf.UFCam.OptAskTypesData
count - Variable in class nxopen.uf.UFCambnd.AskBoundariesData
count - Variable in class nxopen.uf.UFCambnd.AskBoundaryItemsData
count - Variable in class nxopen.uf.UFCamgeom.AskCollectorItemsData
count - Variable in class nxopen.uf.UFCamgeom.AskItemsData
count - Variable in class nxopen.uf.UFCurve.CreateSilhouetteData
count - Variable in class nxopen.uf.UFDirpath.AskDirsData
count - Variable in class nxopen.uf.UFFbmGeom.AskAccessibilityVectorsData
count - Variable in class nxopen.uf.UFFbmGeom.AskAvailableCriteriaData
count - Variable in class nxopen.uf.UFFbmGeom.AskFeatureEntitiesData
count - Variable in class nxopen.uf.UFFbmGeom.AskFeaturesData
count - Variable in class nxopen.uf.UFFbmGeom.AskListOfFeatureNamesData
count - Variable in class nxopen.uf.UFFbmGeom.AskRepresentativeFeaturesData
count - Variable in class nxopen.uf.UFFbmGeom.AskUsedCriteriaData
count - Variable in class nxopen.uf.UFLib.AskRecordInRsetData
count - Variable in class nxopen.uf.UFLib.AskRsetMapData
count - Variable in class nxopen.uf.UFLib.ExecuteQueryData
count - Variable in class nxopen.uf.UFMfm.AskAttributesData
count - Variable in class nxopen.uf.UFMfm.AskGeometryGroupsData
count - Variable in class nxopen.uf.UFMfm.AskListOfFacesData
count - Variable in class nxopen.uf.UFMfm.AskMachiningFeaturesOfPartData
count - Variable in class nxopen.uf.UFMfm.AskMachiningFeaturesOfTypeData
count - Variable in class nxopen.uf.UFMfm.AskMachiningFeatureTypesData
count - Variable in class nxopen.uf.UFMfm.AskSelectedFeaListData
count - Variable in class nxopen.uf.UFMfm.CreateMachiningFeaturesFromModelingFeaturesData
count - Variable in class nxopen.uf.UFMfm.CreateMachiningFeaturesFromRecognizedFeaturesData
count - Variable in class nxopen.uf.UFMfm.CreateMachiningFeaturesFromTaggedArcsData
count - Variable in class nxopen.uf.UFMfm.CreateMachiningFeaturesFromTaggedEdgesData
count - Variable in class nxopen.uf.UFMfm.CreateMachiningFeaturesFromTaggedFacesData
count - Variable in class nxopen.uf.UFMfm.CreateMachiningFeaturesFromUserDefinedFeaturesData
count - Variable in class nxopen.uf.UFModeling.AskSubdivFaceParmsData
count - Variable in class nxopen.uf.UFParam.AskDoubleVlaData
count - Variable in class nxopen.uf.UFParam.AskInheritedParamsData
count - Variable in class nxopen.uf.UFParam.AskIntVlaData
count - Variable in class nxopen.uf.UFParam.AskRequiredParamsData
count - Variable in class nxopen.uf.UFParam.AskTagVlaData
count - Variable in class nxopen.uf.UFPart.SaveAllData
count - Variable in class nxopen.uf.UFPart.UpdateFamilyInstanceData
count - Variable in class nxopen.uf.UFProcessAid.PopulateAttrListData
count - Variable in class nxopen.uf.UFSf.AskLvNxData
count - Variable in class nxopen.uf.UFUgmgr.ListConfigRulesData
count - Variable in class nxopen.uf.UFUgmgr.ListContextsData
count - Variable in class nxopen.uf.UFUgmgr.ListFolderContentsData
count - Variable in class nxopen.uf.UFUgmgr.ListIdDisplayRulesData
count - Variable in class nxopen.uf.UFUgmgr.ListIdTypesData
count - Variable in class nxopen.uf.UFUgmgr.ListPartsInFolderData
count - Variable in class nxopen.uf.UFUi.AskSelObjectListData
count - Variable in class nxopen.uf.UFUi.SelectParametersData
count - Variable in class nxopen.uf.UFUi.SelectPointCollectionData
count - Variable in class nxopen.uf.UFUi.SelectRoutingObjectsData
count - Variable in class nxopen.uf.UFUi.SelectRpoDimensionsData
count - Variable in class nxopen.uf.UFUi.SelectSketchDimensionsData
count - Variable in class nxopen.uf.UFUiOnt.AskSelectedNodesData
count - Variable in class nxopen.uf.UFWeld.LocateWelds2Data
count - Variable in class nxopen.uf.UFWeld.LocateWeldsData
count - Variable in class nxopen.uf.UFWeld.PopulateAttrListData
COUNT_ANGLE_DISTANCE - Static variable in class nxopen.geometricutilities.HelixPattern.SizeOptions
use Count, Angle, Distance to define a Helix
COUNT_HELIX_PITCH_AND_SPAN - Static variable in class nxopen.geometricutilities.HelixPattern.SizeOptions
use Count, Helix Pitch, Span to define a Helix
COUNT_HELIX_PITCH_AND_TURNS - Static variable in class nxopen.geometricutilities.HelixPattern.SizeOptions
use Count, Helix Pitch, Turns to define a Helix
countAttributes(Tag, int) - Method in interface nxopen.uf.UFAttr
countCharacters(String) - Method in interface nxopen.uf.UFText
countClearanceSets() - Method in interface nxopen.assemblies.ClearanceSetCollection
Determines the number of clearance analysis datasets in the specified part.
countDatasets(Tag) - Method in interface nxopen.uf.UFClear
countElements(Tag) - Method in interface nxopen.uf.UFSf
countEntsInPartOcc(Tag) - Method in interface nxopen.uf.UFAssem
COUNTER_BORE_DEPTH - Static variable in class nxopen.annotations.HoleCalloutSettingsBuilder.Parametertype
COUNTER_BORE_DIAMETER - Static variable in class nxopen.annotations.HoleCalloutSettingsBuilder.Parametertype
COUNTER_BORE_HOLE - Static variable in class nxopen.uf.UFModl.HoleType
COUNTER_CLOCKWISE - Static variable in class nxopen.cam.InspectionAlignmentBuilder.RotateTableDirections
Rotate table in counter clockwise direction
COUNTER_CLOCKWISE - Static variable in class nxopen.cam.WedmCutParameters.CutDirectionTypes
counter clockwise cut direction
COUNTER_SINK_ANGLE - Static variable in class nxopen.annotations.HoleCalloutSettingsBuilder.Parametertype
COUNTER_SINK_DIAMETER - Static variable in class nxopen.annotations.HoleCalloutSettingsBuilder.Parametertype
COUNTER_SUNK_HOLE - Static variable in class nxopen.uf.UFModl.HoleType
COUNTERBORE - Static variable in class nxopen.features.Hole.Subtype
Counterbore hole
COUNTERBORE_HOLE_FEATURE - Static variable in class nxopen.uf.UFGdt.FeatureType
COUNTERBORED - Static variable in class nxopen.features.HolePackageBuilder.HoleForms
Counterbored hole form
COUNTERBORED - Static variable in class nxopen.geometricutilities.StartHoleData.HoleForms
Counterbored hole form
COUNTERBORED_HOLES - Static variable in class nxopen.tooling.FaceColorManagementBuilder.HoleTypeEnumValue
counterboreDepth() - Method in interface nxopen.features.Hole
Returns
the counterbore depth of the hole.
counterboreDepth() - Method in interface nxopen.geometricutilities.StartHoleData
Returns the counterbore depth
License requirements: None.
counterboreDepthType() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
Returns the counterboreDepth setting
License requirements: None.
counterboreDepthValue() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
Returns the counterboreDepth value
License requirements: None.
counterboredHoles() - Method in interface nxopen.annotations.HoleTableSettingsHoleFiltersBuilder
Returns the counterbored holes
License requirements: None.
counterBoreDiameter() - Method in interface nxopen.die.HoleChildBuilder
Returns the counter bore diameter of the die hole.
counterBoreDiameter() - Method in interface nxopen.die.HoleParentBuilder
Returns the counter bore diameter of die holes.
counterboreDiameter() - Method in interface nxopen.features.Hole
Returns
the counterbore diameter of the hole.
counterboreDiameter() - Method in interface nxopen.geometricutilities.StartHoleData
Returns the counterbore diameter
License requirements: None.
counterBoreDiameterTitle - Variable in class nxopen.die.HoleChildBuilder.HoleAttributesData
Title for counter bore diameter attribute.
counterBoreDiameterTitle - Variable in class nxopen.die.HoleParentBuilder.HoleAttributesData
Title for counter bore diameter attribute.
counterboreDiameterType() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
Returns the counterboreDiameter setting
License requirements: None.
counterboreDiameterValue() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
Returns the counterboreDiameter value
License requirements: None.
CounterboreHoleData() - Constructor for class nxopen.features.Hole.CounterboreHoleData
COUNTERBORING - Static variable in class nxopen.tooling.ForceCalculationBuilder.ProcessTypes
counterboring
COUNTERSINK - Static variable in class nxopen.features.Hole.Subtype
Countersink hole
COUNTERSINK - Static variable in class nxopen.features.HolePackageBuilder.HoleForms
Countersink hole form
COUNTERSINK - Static variable in class nxopen.geometricutilities.StartHoleData.HoleForms
Countersink hole form
COUNTERSINK_DIAMETER - Static variable in class nxopen.cam.CenterlineDrillTurningBuilder.DepthTypes
Depth options: Countersink Diameter
COUNTERSINK_HOLE_FEATURE - Static variable in class nxopen.uf.UFGdt.FeatureType
countersinkAngle() - Method in interface nxopen.annotations.HoleTableSettingsHoleFiltersBuilder
Returns the countersink angle
License requirements: None.
countersinkAngle() - Method in interface nxopen.features.Hole
Returns
the countersink angle of the hole.
countersinkAngle() - Method in interface nxopen.geometricutilities.StartHoleData
Returns the countersink angle
License requirements: None.
countersinkAngleType() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
Returns the countersinkAngle setting
License requirements: None.
countersinkAngleValue() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
Returns the countersinkAngle value
License requirements: None.
countersinkDiameter() - Method in interface nxopen.features.Hole
Returns
the countersink diameter of the hole.
countersinkDiameter() - Method in interface nxopen.geometricutilities.StartHoleData
Returns the countersink diameter
License requirements: None.
countersinkDiameterType() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
Returns the countersinkDiameter setting
License requirements: None.
countersinkDiameterValue() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
Returns the countersinkDiameter value
License requirements: None.
CountersinkHoleData() - Constructor for class nxopen.features.Hole.CountersinkHoleData
COUNTERSINKING - Static variable in class nxopen.tooling.ForceCalculationBuilder.ProcessTypes
countersinking
counterSpindleFace() - Method in interface nxopen.cam.ConvertFromMCDBuilder
Returns the counter spindle face.
COUNTERSUNK_HOLES - Static variable in class nxopen.tooling.FaceColorManagementBuilder.HoleTypeEnumValue
countersunkHoles() - Method in interface nxopen.annotations.HoleTableSettingsHoleFiltersBuilder
Returns the countersunk holes
License requirements: None.
countInterferences(Tag) - Method in interface nxopen.uf.UFClear
countListItems(UFVariant) - Method in interface nxopen.uf.UFKf
countNodes(Tag) - Method in interface nxopen.uf.UFSf
countObjsInComp(Tag) - Method in interface nxopen.uf.UFAssem
countOfFaces() - Method in interface nxopen.cam.Splitter
Returns the item count of the list
License requirements: None.
countOfInstances() - Method in interface nxopen.geometricutilities.HelixPattern
Returns the count of instances for the Helix type pattern
License requirements: None.
countOfMachiningFeatures - Variable in class nxopen.uf.UFMfm.CreateMachiningFeaturesFromTaggedPointsData
countOfTargets - Variable in class nxopen.uf.UFModl.MatchedgeData
countRefSetsIn(Tag) - Method in interface nxopen.uf.UFAssem
countTextSubstring(int, int) - Method in interface nxopen.uf.UFDrf
coupleLimit() - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder
Returns the coupling limit
License requirements: None.
Coupler - Interface in nxopen.motion
Represents a motion coupler object
This is an abstract class, and cannot be created.
CouplerBuilder - Interface in nxopen.motion
Represents a
CouplerBuilder This is an abstract class, and cannot be created.
Represents a motion cable object
To create or edit an instance of this class, use
CouplerCableBuilder
Created in NX6.0.0
Represents a collection of motion couplers
To obtain an instance of this class, refer to
MotionManager
Created in NX6.0.0
Represents a motion gear object
To create or edit an instance of this class, use
CouplerGearBuilder
Created in NX6.0.0
Represents a motion rack and pinion object
To create or edit an instance of this class, use
CouplerRckpnBuilder
Created in NX6.0.0
Returns the Motion.CouplerCollection belonging to this part
Created in NX3.0.0
Coupling - Interface in nxopen.mechatronics
Represents the mechatronics coupling class.
CouplingBuilder - Interface in nxopen.mechatronics
This is an abstract class, and cannot be created.
coutoutType() - Method in interface nxopen.features.shipdesign.PenetrationAssociationBuilder
Returns the coutout type
License requirements: None.
coutoutType() - Method in interface nxopen.features.shipdesign.PenetrationCutoutBuilder
Returns the coutout type
License requirements: None.
coutoutType() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
Returns the coutout type
License requirements: None.
coutput() - Method in interface nxopen.cam.AlongMachineAxisMoveBuilder
Returns the C output
License requirements: None.
COVER_ARC - Static variable in class nxopen.features.SectionSurfaceBuilder.SectionMethodCircularTangentEnum
Deprecated.
cover arc
COVER_ARC - Static variable in class nxopen.features.SectionSurfaceBuilderEx.SectionMethodCircleTangentType
cover arc
coverThickness() - Method in interface nxopen.routing.electrical.CableStockDefinition
Returns the thickness of the cable's covering.
CPARLN - Static variable in class nxopen.cam.CamInspectionOperationFeaturetypes
Closed Parallel Line bounded slot
CPARLN - Static variable in class nxopen.cam.InspectionMethodBuilder.MethodTypes
Bounded Slot Tab
CPLUS_PLUS - Static variable in class nxopen.preferences.SessionUserInterface.JournalLanguageType
C++ restricts the file format to Ascii
CPT_CLINE_FBOLT - Static variable in class nxopen.uf.UFDrf.ValidClineForm
CPT_CLINE_FCIR - Static variable in class nxopen.uf.UFDrf.ValidClineForm
CPT_CLINE_PBOLT - Static variable in class nxopen.uf.UFDrf.ValidClineForm
CPT_CLINE_PCIR - Static variable in class nxopen.uf.UFDrf.ValidClineForm
cpuTime - Variable in class nxopen.uf.UF.TimerValues
CQC - Static variable in class nxopen.cae.responsesimulation.CombinationEvaluationOptions.EvaluationMethod
CR - Static variable in class nxopen.annotations.RadiusSymbol
Specifies CR symbol
CR - Static variable in class nxopen.annotations.SearchCriteriaDimensionBuilder.RadialSymbolOptions
CR
CR12 - Static variable in class nxopen.tooling.QuickQuotationBuilder.InsertGroupMaterials
insert group material is Cr12
CR12MO_V - Static variable in class nxopen.tooling.QuickQuotationBuilder.InsertGroupMaterials
insert group material is Cr12MoV
cr2 - Variable in class nxopen.uf.UFPatt.CycleErrorsData
cr3 - Variable in class nxopen.uf.UFDrf.AskTextData
cr3 - Variable in class nxopen.uf.UFView.AskViewDependentStatusData
crankRadius() - Method in interface nxopen.tooling.MotionSimulationBuilder
Returns the crank radius to calculate controller data.
CrashBarrier - Interface in nxopen.features.vehicledesign
Represents a crash barrier feature
To create or edit an instance of this class, use
CrashBarrierBuilder
Created in NX8.5.0
Represents a
CrashBarrier builder
to create and edit a vehicle design crash barrier.
Represents the cross position types.
CrashBarrierBuilder.OverlapSideType - Class in nxopen.features.vehicledesign
Represents the overlap side types for the front and rear barriers.
CrashBarrierBuilder.PositionObjectType - Class in nxopen.features.vehicledesign
Represents the position object types.
CrashBarrierBuilder.RequirementsControlsControlType - Class in nxopen.features.vehicledesign
Represents the requirements control types to define the crash barrier.
CrashBarrierBuilder.ShapeType - Class in nxopen.features.vehicledesign
Represents the shape types.
CrashBarrierBuilder.SideOverlapSideType - Class in nxopen.features.vehicledesign
Represents the overlap side types for side barrier.
CrashBarrierBuilder.SidePositionType - Class in nxopen.features.vehicledesign
Represents the position types for side barrier.
cre2dtrimBsurf(int, int, int, int, double[], double[], double[], int, int[], int[], Tag[], double) - Method in interface nxopen.uf.UFModlGeneral
Cre2dtrimBsurfData() - Constructor for class nxopen.uf.UFModlGeneral.Cre2dtrimBsurfData
CRE_FEA_GRP_IN_MANU_FEA_MANG - Static variable in class nxopen.uf.UFCamPref.CamPref
create(Arrangement, String) - Method in interface nxopen.assemblies.ArrangementCollection
CREATE - Static variable in class nxopen.assemblies.DesignElementBuilder.OperationType
Creates a design element
create(String) - Method in interface nxopen.assemblies.ExplosionCollection
Creates an explosion based upon the default arrangement in the given OCC part.
CREATE - Static variable in class nxopen.AttributePropertiesBuilder.OperationType
CREATE - Static variable in class nxopen.blockstyler.BlockDialog.DialogMode
When the user presses Ok or Apply on the
dialog, the user's inputs are saved in dialog memory and the next time that the dialog
is shown in Create mode, the dialog is initialized using the user's previous
inputs.
CREATE - Static variable in class nxopen.cae.ElementCreateBuilder.NewMeshType
create new mesh
CREATE - Static variable in class nxopen.cae.ElementExtrudeBuilder.NewMeshType
create new mesh
CREATE - Static variable in class nxopen.cae.ElementProjectBuilder.NewMeshType
Create new mesh
CREATE - Static variable in class nxopen.cae.ElementReflectBuilder.NewMeshType
create new mesh
CREATE - Static variable in class nxopen.cae.ElementRevolveBuilder.NewMeshType
create new mesh
CREATE - Static variable in class nxopen.cae.ElementTranslateBuilder.NewMeshType
create a new mesh
create(String, int) - Method in interface nxopen.cae.SimConditionCollection
create(String) - Method in interface nxopen.cae.SimConditionCollection
create(int) - Method in interface nxopen.cae.SimConditionCollection
create() - Method in interface nxopen.cae.SimConditionCollection
create(String, Unit) - Method in interface nxopen.cae.SimConditionParamCollection
create(double, SimCondition, String) - Method in interface nxopen.cae.SimConditionTimeStepCollection
create(String, String, SimLoadRecipeTypes.DataTypes) - Method in interface nxopen.cae.SimLoadRecipeCollection
Creates a new Load Recipe and adds it to the collection.
create(SimLoadRecipeMapEntryTargetTypes.TargetTypes, String) - Method in interface nxopen.cae.SimLoadRecipeMapEntryCollection
Creates a new map entry and adds it to the collection.
create(String, String, String) - Method in interface nxopen.cae.SimLoadRecipeSourceCollection
Creates and adds a new
SimLoadRecipeSource to the Load Recipe
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX10.0.0
create new mesh
create(double, double, double) - Method in interface nxopen.cam.FormEdgesBuilder
Create a new form edges item
License requirements: cam_base ("CAM BASE")
.
create(double, double, double, double) - Method in interface nxopen.cam.HolderSectionBuilder
Create a new holder section item
License requirements: cam_base ("CAM BASE")
.
create(InspectionGroup, InspectionGroup, InspectionGroup, InspectionGroup, String, String, OperationCollection.UseDefaultName, String) - Method in interface nxopen.cam.InspectionOperationCollection
Create an operation of the specified type and subtype under the parent groups.
create(NCGroup, NCGroup, NCGroup, NCGroup, String, String, OperationCollection.UseDefaultName, String) - Method in interface nxopen.cam.OperationCollection
Create an operation of the specified type and subtype under the parent groups.
create(NXObject, double, NXObject) - Method in interface nxopen.cam.PreprocessGeometryBuilder
Create new facet body
License requirements: None.
create(String, int, int, double, double, double, double, int, int) - Method in interface nxopen.cam.TrackingBuilder
Create a new trackpoint, values of name,xOffset and yOffset may will be changed
License requirements: cam_base ("CAM BASE")
.
create(String) - Method in interface nxopen.drawings.SheetTemplateManager
Creates drawings via the sheet template, given a path to sheet template
License requirements: drafting ("DRAFTING")
.
create(String) - Method in interface nxopen.ExpressionCollection
Creates an expression
License requirements: None.
CREATE - Static variable in class nxopen.features.shipdesign.PenetrationRequestBuilder.RequestDialogType
CREATE - Static variable in class nxopen.features.shipdesign.PlateBuilder.Types
Creates plate body.
create(BlendStopshortBuilder.Choices, Expression, Edge, boolean, Point) - Method in interface nxopen.geometricutilities.BlendStopshortBuilderCollection
Creates an BlendStopshortBuilder.
CREATE - Static variable in class nxopen.geometricutilities.BooleanOperation.BooleanType
Create
create() - Method in interface nxopen.geometricutilities.FacePlaneSelectionBuilderCollection
Creates an FacePlaneSelectionBuilder.
create(ScCollector, boolean) - Method in interface nxopen.geometricutilities.FaceSetDataCollection
create(String, LayoutDefinition, boolean) - Method in interface nxopen.LayoutCollection
CREATE - Static variable in class nxopen.mechatronics.ComparisonResult.Category
Create category
CREATE - Static variable in class nxopen.mechatronics.ComparisonResultContext.ResolveConflictAction
Create action
create(String) - Method in interface nxopen.mechatronics.PMNavFolderObjectCollection
create(String, Marker.MarkerType, Link, Point, NXMatrix) - Method in interface nxopen.motion.MarkerCollection
Create a
Marker in the Scenario for Motion+ database.
Creates an NXException
create(Matrix3x3) - Method in interface nxopen.NXMatrixCollection
Creates an NXMatrix
License requirements: None.
create() - Static method in class nxopen.NXRemotableObject.RemotingProtocol
Creates a RemotingProtocol that will use an anonymous port
create(int) - Static method in class nxopen.NXRemotableObject.RemotingProtocol
Creates a RemotingPrototcol that will use the specified port
create(int, RMIClientSocketFactory, RMIServerSocketFactory) - Static method in class nxopen.NXRemotableObject.RemotingProtocol
Creates a RemotingPrototcol that will use the specified port and socket factories
create(AttributeGroupDescription) - Method in interface nxopen.pdm.IAttributeGroupOwner
CREATE - Static variable in class nxopen.pdm.PartOperationBuilder.OperationType
Create Part
create(ControlPoint, boolean, double, double) - Method in interface nxopen.routing.BendCornerCollection
create(ControlPoint, ISegment, ISegment) - Method in interface nxopen.routing.DiscontinuityCornerCollection
Creates a discontinuity corner object at the given
ControlPoint .
Create overstock
CREATE - Static variable in class nxopen.Section.Mode
Feature is being created
CREATE - Static variable in class nxopen.sim.KinematicConfigurator.UniteTypes
Create the spinning geometries as individual bodies
create(nxopen.features.Feature) - Method in interface nxopen.SketchEvaluatorCollection
CREATE - Static variable in class nxopen.tooling.ChangeoverManagementBuilder.Types
the create mode
CREATE - Static variable in class nxopen.tooling.CornerDesignBuilder.Types
Create operation
CREATE - Static variable in class nxopen.tooling.EWDraftingBuilder.ModeOption
create drawing
CREATE - Static variable in class nxopen.tooling.InsertAuxiliaryBuilder.CircOperationTypes
create
CREATE - Static variable in class nxopen.tooling.InsertAuxiliaryBuilder.RectOperationOption
create
CREATE - Static variable in class nxopen.tooling.ReliefDesignBuilder.Types
Create operation
CREATE - Static variable in class nxopen.tooling.ScrapDesignBuilder.Body
Create operation
create(String, String) - Method in interface nxopen.uf.UFCutter
create() - Method in interface nxopen.uf.UFDbcMld
create(String, String, Tag) - Method in interface nxopen.uf.UFFbmGeom
create(String, String) - Method in interface nxopen.uf.UFNcgeom
create(String, String) - Method in interface nxopen.uf.UFNcmthd
create(String, String) - Method in interface nxopen.uf.UFNcprog
create(String, String) - Method in interface nxopen.uf.UFOper
create(UFPlist.Prefs, double[]) - Method in interface nxopen.uf.UFPlist
create(Tag, String) - Method in interface nxopen.uf.UFSetup
create(UFSubdiv.Type, UFSubdiv.DataStructuresUnion) - Method in interface nxopen.uf.UFSubdiv
create(UFTabnot.SectionPrefs, double[]) - Method in interface nxopen.uf.UFTabnot
create(String, Validation.InputType) - Method in interface nxopen.ValidationCollection
Create a new validation object
License requirements: None.
create0dMesh(int, Tag[], UFSf.Sf0dElementType, double, UFSf.Sf0dDensityType, double) - Method in interface nxopen.uf.UFSf
create0dMeshDistMass(int, Tag[], UFSf.Sf0dElementType, double, UFSf.Sf0dDensityType, double, int) - Method in interface nxopen.uf.UFSf
create1dConnectionMesh(UFSf.Sf1dMeshData, UFSf.OrientationData, int, Tag[], UFSf.MeshGeomMeshdir[], int, Tag[], UFSf.MeshGeomMeshdir[]) - Method in interface nxopen.uf.UFSf
create1dMesh(UFSf.Sf1dMeshData, UFSf.OrientationData, int, Tag[], int, Tag[]) - Method in interface nxopen.uf.UFSf
create2dContact(UFMotion.Motion2DContact) - Method in interface nxopen.uf.UFMotion
create3dContact(UFMotion.Motion3DContact) - Method in interface nxopen.uf.UFMotion
create3dGraphBuilder(ResultProbe) - Method in interface nxopen.cae.ResultManager
Returns a builder used for creating 3d graphs across iterations.
create3ptClineFbolt(int, UFDrf.Object[]) - Method in interface nxopen.uf.UFDrf
create3ptClineFcir(int, UFDrf.Object[]) - Method in interface nxopen.uf.UFDrf
create3ptClinePbolt(int, UFDrf.Object[]) - Method in interface nxopen.uf.UFDrf
create3ptClinePcir(int, UFDrf.Object[]) - Method in interface nxopen.uf.UFDrf
create3Scalars(Tag[]) - Method in interface nxopen.uf.UFPoint
CREATE_AS_AUTOMATIC - Static variable in class nxopen.Sketch.DimensionOption
Create dimension as automatic
CREATE_AS_DRIVING - Static variable in class nxopen.Sketch.DimensionOption
Create dimension as driving
CREATE_AS_NEEDED - Static variable in class nxopen.cam.InspectionMoveBuilder.SensorStrategyTypes
Create as needed
CREATE_AS_REFERENCE - Static variable in class nxopen.Sketch.DimensionOption
Create dimension as reference
CREATE_ATTRIBUTES - Static variable in class nxopen.weld.WeldJointBuilder.Types
Create weld joints from attributed ship structures data.
CREATE_AUTOMATIC - Static variable in class nxopen.weld.WeldJointBuilder.Types
Automatic weld joint creation.
CREATE_BLANK - Static variable in class nxopen.tooling.BlankGeneratorBuilder.Types
Create a blank.
CREATE_CMP_NO_PLOT - Static variable in class nxopen.uf.UFPlot.CreateCmpResultPlot
CREATE_CMP_PLOT - Static variable in class nxopen.uf.UFPlot.CreateCmpResultPlot
CREATE_CMP_PLOT_DIFF_ONLY - Static variable in class nxopen.uf.UFPlot.CreateCmpResultPlot
CREATE_COMPANION_RESULT - Static variable in class nxopen.cae.ResultsManipulationBuilder.Action
Deprecated.
CREATE_COMPANION_RESULT_WITH_MODEL - Static variable in class nxopen.cae.ResultsManipulationBuilder.Action
Deprecated.
no longer used
CREATE_CONFLICT - Static variable in class nxopen.mechatronics.ComparisonResult.Category
Conflict from Create category
CREATE_CSYS - Static variable in class nxopen.MeasureBuilder.AnnotationType
CREATE_EACH - Static variable in class nxopen.SuppressByExpressionBuilder.ExpressionAction
Create one expression per feature
CREATE_FAB - Static variable in class nxopen.routing.DesignRuleViolationCollection.Reason
CREATE_FIELD - Static variable in class nxopen.cae.ResultsCombinationBuilder.Output
CREATE_FIELD - Static variable in class nxopen.cae.ResultsEnvelopeBuilder.Output
CREATE_FIELD - Static variable in class nxopen.cae.ResultsReductionBuilder.Output
CREATE_IMPORTED_RESULT - Static variable in class nxopen.cae.ResultsManipulationBuilder.Action
Deprecated.
no longer used
CREATE_IMPORTED_SOLUTION - Static variable in class nxopen.cae.ResultsManipulationBuilder.Action
Deprecated.
CREATE_INSERT - Static variable in class nxopen.tooling.GeneralInsertBuilder.Types
CREATE_LAYOUT - Static variable in class nxopen.tooling.BlankLayoutBuilder.Types
the type of create blank layout
CREATE_LINE - Static variable in class nxopen.MeasureBuilder.AnnotationType
CREATE_MANUAL - Static variable in class nxopen.weld.WeldJointBuilder.Types
Manual weld joint creation.
CREATE_MULTIPLE - Static variable in class nxopen.weld.WeldJointBuilder.Types
Create multiple weld joints from manual input.
CREATE_NEW - Static variable in class nxopen.cae.PolygonFaceOnMeshBuilder.SelectBodyMethod
Create new body
CREATE_NEW - Static variable in class nxopen.cae.SolverAppendOption.SolutionOption
CREATE_NEW - Static variable in class nxopen.CGMBuilder.ActionOption
Creates a new dataset in Teamcenter
CREATE_NEW - Static variable in class nxopen.features.CopyPasteBuilder.ExpressionTransferOption
New
CREATE_NEW - Static variable in class nxopen.features.shipdesign.TransitionBuilder.TransitionMethods
CREATE_NEW - Static variable in class nxopen.tooling.AssemblyDrawingBuilder.DrawingCreateOrEdit
CREATE_NEW_LOAD_CASES - Static variable in class nxopen.cae.CompanionResultBuilder.ResultAppendMethod
Companion results will be created in new separate load cases
CREATE_NEW_LOAD_CASES - Static variable in class nxopen.cae.ResultsManipulationBuilder.ResultAppendMethod
CREATE_ORDINATE_DIMENSION - Static variable in class nxopen.tooling.AutoDimensionBuilder.MainType
CREATE_PART_FUN - Static variable in class nxopen.uf.UFUi.FunType
CREATE_PART_REASON - Static variable in class nxopen.uf.UF.CallbackReason
CREATE_PATH - Static variable in class nxopen.routing.DesignRuleViolationCollection.Reason
CREATE_POST_VIEW - Static variable in class nxopen.cae.ResultsReductionBuilder.Output
CREATE_PRISM_ERROR - Static variable in class nxopen.uf.UFConstants
CREATE_SHARED - Static variable in class nxopen.SuppressByExpressionBuilder.ExpressionAction
Create one common expression for all features
CREATE_SOLIDS - Static variable in class nxopen.motion.PackagingInterferenceBuilder.Action
Create solids of interference volumes.
CREATE_SPECIFICATION - Static variable in class nxopen.pdm.PartOperationCreateBuilder.OperationSubType
Create Specification and not a Part
CREATE_TORUS_ERROR - Static variable in class nxopen.uf.UFConstants
createAbsolutePositionBuilder(Part) - Method in interface nxopen.CollaborativeContentManager
Creates a
AbsolutePositionBuilder
License requirements: nx_4gd_integration ("4th Generation Design")
Created in NX10.0.0
Creates a
AdaptiveShellBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
Created in NX6.0.0
Creates a
AddComponentBuilder
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
Created in NX7.5.1
Creates/Edits the addendum section builder.
createAddendumSectionUserDefinedBuilder() - Method in interface nxopen.die.DieCollection
Creates a user defined addendum section builder.
createAddFontBuilder() - Method in interface nxopen.routing.RouteManager
Creates a
AddFontBuilder for creating user-defined line fonts
to use with line segments.
Creates add objects to region builder
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
createAddRemoveBoxViewBuilder(DraftingView) - Method in interface nxopen.drawings.DraftingViewCollection
createAddSurfBuilder(nxopen.features.Feature) - Method in interface nxopen.die.DieCollection
createAddTicBuilder(FrameBar) - Method in interface nxopen.annotations.FrameBarCollection
Creates a
AddTicBuilder
License requirements: nx_ship_drafting ("Ship Drafting")
Created in NX8.0.0
Creates a adjacent face method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createAdjacentFaceMethod(CAEFace[]) - Method in interface nxopen.cae.SmartSelectionManager
Creates a adjacent face method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createAdjacentFaceMethod(CAEEdge) - Method in interface nxopen.cae.SmartSelectionManager
Creates a adjacent face method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createAdjacentFaceMethod(CAEEdge[]) - Method in interface nxopen.cae.SmartSelectionManager
Creates a adjacent face method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createAdmMoveFaceBuilder(AdmMoveFace) - Method in interface nxopen.features.FeatureCollection
Creates a
AdmMoveFaceBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
Created in NX6.0.0
Creates a
AdmOffsetRegionBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
Created in NX6.0.0
Creates a
AdmResizeFaceBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
Created in NX6.0.0
Creates a
AeroFlangeBuilder
License requirements: nx_aero_design (" NX Aero Design")
Created in NX10.0.0
Creates a
AeroRibBuilder
License requirements: nx_aero_design (" NX Aero Design")
Created in NX10.0.0
Creates a
AestheticFaceBlendBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
Created in NX7.5.0
Creates an afu abscissa header information data object
License requirements: nx_ftk ("NX Advanced Graphing")
.
createAfuData() - Method in interface nxopen.cae.AfuManager
createAfuData(AfuData.AbscissaType) - Method in interface nxopen.cae.AfuManager
Create an AFU Data Record object with specified axis definition
License requirements: nx_ftk ("NX Advanced Graphing")
.
createAfuHeaderId() - Method in interface nxopen.cae.AfuManager
Create an AFU Header Id object
License requirements: nx_ftk ("NX Advanced Graphing")
.
createAfuOrdinateHeaderInfo() - Method in interface nxopen.cae.AfuManager
Creates an afu ordindate header information data object
License requirements: nx_ftk ("NX Advanced Graphing")
.
createAfuZHeaderInfo() - Method in interface nxopen.cae.AfuManager
Create an afu Z axis header information data object
License requirements: nx_ftk ("NX Advanced Graphing")
.
createAlignmentBuilder() - Method in interface nxopen.cae.SimSolution
Creates the builder object for test and imported solution alignment dialog
License requirements: nx_correl_base ("FE Correlation")
.
createAlignShellElementNormalBuilder() - Method in interface nxopen.cae.ModelCheckManager
Provides access for creating align 2D element normal builders in a cae part
License requirements: nx_masterfem ("Finite Element Modeling")
.
createAll() - Method in interface nxopen.tooling.CompDrawingBuilder
Creates all drawings.
createAllAroundVisionBuilder(Feature) - Method in interface nxopen.features.AutomotiveCollection
createAllAroundVisionBuilder(AllAroundVision) - Method in interface nxopen.features.VehicleDesignCollection
Creates a
AllAroundVisionBuilder
License requirements: nx_general_packaging ("NX General Packaging")
Created in NX9.0.0
Creates a
AlongGuideCutBuilder
License requirements: nx_ship_detail ("Ship Detail Design")
Created in NX8.5.0
Create a Move To Machine Position.
createAlongMcsAxisMoveBuilder(Move) - Method in interface nxopen.cam.MoveCollection
Create a Move to MCS Position
License requirements: cam_base ("CAM BASE")
.
createAlongToolAxisMoveBuilder(Move) - Method in interface nxopen.cam.MoveCollection
Create a Move Along Tool Axis
License requirements: cam_base ("CAM BASE")
.
createAlternateIdInformation() - Method in interface nxopen.pdm.AlternateIdManager
createAnalyzePocketBuilder(AnalyzePocket) - Method in interface nxopen.features.FeatureCollection
Creates a
AnalyzePocketBuilder
License requirements: nx_aero_design (" NX Aero Design")
Created in NX9.0.0
Create initial face approximated from the selected faces.
createAnchorFromPnt(Tag, Tag) - Method in interface nxopen.uf.UFRoute
createAnchorFromPos(Tag, double[]) - Method in interface nxopen.uf.UFRoute
createAngle(Tag, UFGexp.Qualifier, Tag, Tag, UFGexp.Qualifier, Tag) - Method in interface nxopen.uf.UFGexp
CreateAngleData() - Constructor for class nxopen.uf.UFGexp.CreateAngleData
createAngleDimension() - Method in interface nxopen.SketchChamferBuilder
Returns the flag to indicate whether to create a dimension for
SketchChamferBuilder.angle()
License requirements: drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
Created in NX7.5.0
The flag to indicate if we need to create angle dimension
License requirements: None.
createAngularDim(int, UFDrf.Object, UFDrf.Object, UFDrf.Text, double[]) - Method in interface nxopen.uf.UFDrf
createAngularDimensionBuilder(BaseAngularDimension) - Method in interface nxopen.annotations.DimensionCollection
createAngularDimensionBuilder(AngularDim) - Method in interface nxopen.features.FeatureCollection
Creates a
AngularDimBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
Created in NX6.0.0
Creates animation polyline
License requirements: studio_free_form ("STUDIO FREE FORM")
.
createAnnotateViewsBuilder() - Method in interface nxopen.drafting.AutomationManager
createAnnotation(int, String, int, boolean, String[]) - Method in interface nxopen.cae.Post
Creates min/max annotation object
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
createAnnotation(int, String, int[], int[], String[]) - Method in interface nxopen.cae.Post
createAnnotation(int, String, int[], int[], int[], String[]) - Method in interface nxopen.cae.Post
Creates entity annotation object
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
createAnnotation(int, String, double, double, String[]) - Method in interface nxopen.cae.Post
Creates user location box annotation object
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
createAnnotationEditSettingsBuilder(DisplayableObject[]) - Method in interface nxopen.drafting.SettingsManager
Creates a
EditSettingsBuilder
For multiple object settings, first create primary settings builder by passing all
selected 'n' objects.Then create 'n-1' secondary builders by passing single selected
object starting from second selected object.
Creates an Offset In Face builder
License requirements: solid_modeling ("SOLIDS MODELING")
.
createApexCurve() - Method in interface nxopen.features.SectionSurfaceBuilder
createApexCurve() - Method in interface nxopen.features.SectionSurfaceBuilderEx
Returns whether an apex curve should be created.
createAppendedTextEditorBuilder(Dimension) - Method in interface nxopen.annotations.DimensionCollection
createArbitraryAreaSeedBuilder() - Method in interface nxopen.annotations.PmiManager
createArbitraryTarget(ArbitraryTargetData, PmiData, Xform, Point3d, LeaderBundle) - Method in interface nxopen.annotations.DatumTargetCollection
Creates a PMI arbitrary target
License requirements: geometric_tol ("GDT")
.
createArbitraryTarget(ArbitraryTargetData, Point3d, LeaderBundle) - Method in interface nxopen.annotations.DatumTargetCollection
Creates a drafting arbitrary target
License requirements: drafting ("DRAFTING")
.
createArc(Point3d, Point3d, Point3d, boolean) - Method in interface nxopen.CurveCollection
Creates an
Arc that passes through the three specified points.
Creates an arc length dimension
License requirements: drafting ("DRAFTING")
.
createArcPointCenter(Tag, Tag, UFCurve.Limit[], Tag, boolean) - Method in interface nxopen.uf.UFCurve
createArcPointCenter(Tag, Tag, UFCurve.Limit[], Tag, boolean) - Method in interface nxopen.uf.UFSfCurve
createArcPointPointRadius(Tag, Tag, double, UFCurve.Limit[], Tag, boolean) - Method in interface nxopen.uf.UFCurve
createArcPointPointRadius(Tag, Tag, double, UFCurve.Limit[], Tag, boolean) - Method in interface nxopen.uf.UFSfCurve
createArcPointPointTangent(Tag, Tag, Tag, UFCurve.HelpData, UFCurve.Limit[], Tag, boolean) - Method in interface nxopen.uf.UFCurve
createArcPointTangentPoint(Tag, Tag, Tag, UFCurve.HelpData, UFCurve.Limit[], Tag, boolean) - Method in interface nxopen.uf.UFCurve
createArcPointTangentRadius(Tag, Tag, double, UFCurve.HelpData, UFCurve.Limit[], Tag, boolean) - Method in interface nxopen.uf.UFCurve
createArcPointTangentTangent(Tag, Tag, Tag, UFCurve.HelpData[], UFCurve.Limit[], Tag, boolean) - Method in interface nxopen.uf.UFCurve
createArcRadiusAngles(Tag, UFSo.UpdateOption, Tag, Tag, Tag[]) - Method in interface nxopen.uf.UFSo
createArcTangentPointPoint(Tag, Tag, Tag, UFCurve.HelpData, UFCurve.Limit[], Tag, boolean) - Method in interface nxopen.uf.UFCurve
createArcTangentPointTangent(Tag, Tag, Tag, UFCurve.HelpData[], UFCurve.Limit[], Tag, boolean) - Method in interface nxopen.uf.UFCurve
createArcTangentTangentPoint(Tag, Tag, Tag, UFCurve.HelpData[], UFCurve.Limit[], Tag, boolean) - Method in interface nxopen.uf.UFCurve
createArcTangentTangentRadius(Tag, Tag, double, UFCurve.HelpData[], UFCurve.Limit[], Tag, boolean) - Method in interface nxopen.uf.UFCurve
createArcThreePoints(Tag, UFSo.UpdateOption, Tag[]) - Method in interface nxopen.uf.UFSo
createArcThru3pts(int, double[], double[], double[]) - Method in interface nxopen.uf.UFCurve
createArcXform2Points(Tag, UFSo.UpdateOption, Tag, Tag[]) - Method in interface nxopen.uf.UFSo
createAreafill(int, int[], Tag[], Tag) - Method in interface nxopen.uf.UFDrf
createArrayHole(int) - Method in interface nxopen.tooling.FastenerAssy
Creates array hole data for the fastener assembly
License requirements: None.
createArrayRecord2d(String, String, int) - Method in interface nxopen.cae.ftk.DataManager
Creates 2d array record
License requirements: nx_ftk ("NX Advanced Graphing")
.
createArrayRecord2dEvenSpacing(String, String) - Method in interface nxopen.cae.ftk.DataManager
Creates 2d array record with even spacing
License requirements: nx_ftk ("NX Advanced Graphing")
.
createArrayRecord3d(String, String, int) - Method in interface nxopen.cae.ftk.DataManager
Creates 3d array record
License requirements: nx_ftk ("NX Advanced Graphing")
.
createArrayUnit(Unit) - Method in interface nxopen.cae.ftk.DataManager
Creates array unit by nx system unit
License requirements: nx_ftk ("NX Advanced Graphing")
.
createArrayUnit(XyFunctionMeasure, XyFunctionUnit) - Method in interface nxopen.cae.ftk.DataManager
Creates array unit by xy function unit
License requirements: nx_ftk ("NX Advanced Graphing")
.
createArrayUnit(BaseUnit, BaseUnit) - Method in interface nxopen.cae.ftk.DataManager
Creates array unit by numerator and denominator unit
License requirements: nx_ftk ("NX Advanced Graphing")
.
createAscImporter() - Method in interface nxopen.DexManager
Create the ASC Importer
License requirements: nx_layout ("NX Layout")
.
CREATEASNEEDED - Static variable in class nxopen.cam.InspectionSensorMassEditBuilder.SensorStrategyType
Create as needed
createAssembliesGeneralPropertiesBuilder(NXObject[]) - Method in interface nxopen.PropertiesManager
Create the Assemblies.AssembliesGeneralPropertiesBuilder
License requirements: None.
createAssembliesParameterPropertiesBuilder(NXObject[]) - Method in interface nxopen.PropertiesManager
Create the Assemblies.AssembliesParameterPropertiesBuilder
License requirements: None.
createAssemblyCut(Tag, boolean, int, Tag[], int, Tag[]) - Method in interface nxopen.uf.UFAssem
createAssemblyCutBuilder(AssemblyCut) - Method in interface nxopen.features.FeatureCollection
Creates a
AssemblyCutBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX6.0.0
Creates assembly drawing builder
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
createAssemblyFromLayout2dBuilder() - Method in interface nxopen.layout2d.ComponentCollection
Creates a
AssemblyFromLayout2dBuilder that can create assembly from
the selected layout
License requirements: nx_layout ("NX Layout")
Created in NX10.0.0
Create linked body for region sheet other than the cavity or core sheet
License requirements: None.
createAssignCornerBuilder() - Method in interface nxopen.routing.RouteManager
Creates a
AssignCornerBuilder which creates corner
License requirements: routing_base ("Routing Basic")
Created in NX6.0.0
Creates a
AssignCornerBuilder which creates corner
License requirements: routing_base ("Routing Basic")
Created in NX9.0.0
Creates a
AssignDiscontinuityBuilder
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
Created in NX7.5.0
Creates a builder for assigning nodal cs
License requirements: nx_masterfem ("Finite Element Modeling")
.
createAssignPathBuilder(Run) - Method in interface nxopen.routing.RouteManager
Creates a
AssignPathBuilder
License requirements: routing_base ("Routing Basic")
Created in NX8.5.0
Creates a proxy port assigned to a connector.
createAssociateDimensionBuilder(Dimension) - Method in interface nxopen.annotations.AnnotationManager
Creates the Dimension Associativity builder
License requirements: None.
createAssociativeArcBuilder(AssociativeArc) - Method in interface nxopen.features.BaseFeatureCollection
createAssociativeArcBuilder(Arc) - Method in interface nxopen.features.BaseFeatureCollection
createAssociativeLineBuilder(AssociativeLine) - Method in interface nxopen.features.BaseFeatureCollection
createAssociativeLineBuilder(Line) - Method in interface nxopen.features.BaseFeatureCollection
createAssociativeText() - Method in interface nxopen.annotations.AnnotationManager
createAssociativityBuilder(Dimension, int) - Method in interface nxopen.annotations.AnnotationManager
Creates the Dimension Associativity builder
License requirements: None.
createAssortpartAid(UFDrf.AssortpartArc, UFDrf.AssortpartArrow, UFDrf.AssortpartLine, UFDrf.AssortpartText) - Method in interface nxopen.uf.UFDrf
createAssortpartDim(UFDrf.AssortpartArc, UFDrf.AssortpartArrow, UFDrf.AssortpartLine, UFDrf.AssortpartText) - Method in interface nxopen.uf.UFDrf
createAtConicCenter(Tag) - Method in interface nxopen.uf.UFPoint
createAtIntersectionOfTwoCurves(Tag, Tag, Tag, Tag) - Method in interface nxopen.uf.UFPoint
createAttachmentForBookMark() - Method in interface nxopen.issue.IssueManager
Creates a
IssueAttachment for BookMark
License requirements: nx_issue_mgmt ("NX Issue Tracking")
Created in NX9.0.0
Creates a
IssueAttachment for ScreenImage
License requirements: nx_issue_mgmt ("NX Issue Tracking")
Created in NX9.0.0
Creates a
IssueAttachment for Sanpshot
License requirements: nx_issue_mgmt ("NX Issue Tracking")
Created in NX9.0.0
Create the attribute from the data set in the builder.
createAttribute() - Method in interface nxopen.pdm.EffectivityAttributePropertiesBuilder
Create the attribute from the data set in the builder.
createAttribute(UFFam.AttributeData) - Method in interface nxopen.uf.UFFam
createAttributeGroupReviseBuilder(AttributeGroup[]) - Method in interface nxopen.pdm.IAttributeGroupOwner
createAttributeHolder() - Method in interface nxopen.routing.RouteManager
Creates a
AttributeHolder to set Template Attributes and
then copying Template Attributes to Routing Objects.
Create an attribute list entry, that has no value, and add it to the list.
createAttributePropertiesBuilder(BasePart, NXObject[], AttributePropertiesBuilder.OperationType) - Method in interface nxopen.AttributeManager
Creates the AttributePropertiesBuilder
License requirements: None.
createAttributePropertiesBuilder() - Method in interface nxopen.pdm.PartCreationObject
createAttributePropertiesBuilder(NXObject[]) - Method in interface nxopen.PropertiesManager
createAttributeSearchTerm(SearchTerm.SearchTermLogicType, String, String[], String[]) - Method in interface nxopen.assemblies.SubsetRecipe
Creates a
AttributeSearchTerm and
adds it to the recipe at the end of the list of search terms.
Create the AttributeTemplatesBuilder
License requirements: None.
createAttributeValueColor3Builder(TaggedObject) - Method in interface nxopen.display.CgfxAttrCollection
createAttributeValueColor4Builder(TaggedObject) - Method in interface nxopen.display.CgfxAttrCollection
createAttributeValueFileBuilder(TaggedObject) - Method in interface nxopen.display.CgfxAttrCollection
createAttributeValueFloat3Builder(TaggedObject) - Method in interface nxopen.display.CgfxAttrCollection
createAttributeValueFloat4Builder(TaggedObject) - Method in interface nxopen.display.CgfxAttrCollection
createAttributeValueIntegerBuilder(TaggedObject) - Method in interface nxopen.display.CgfxAttrCollection
createAttributeValueNumberBuilder(TaggedObject) - Method in interface nxopen.display.CgfxAttrCollection
createAutoBcBuilder(String, String) - Method in interface nxopen.cae.SimSimulation
Creates a
AutoBCBuilder
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX6.0.0
Creates a
SimAutoBcRecipe
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX5.0.0
Creates a
SketchAutoConstrainBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
Created in NX5.0.0
Creates a
SketchAutoDimensionBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
Created in NX7.5.0
Creates auto dimension builder
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
createAutoFaceSubdiv(Tag[], int, double, int, int) - Method in interface nxopen.uf.UFSf
CreateAutoFaceSubdivData() - Constructor for class nxopen.uf.UFSf.CreateAutoFaceSubdivData
createAutoMacViewerBuilder(TaggedObject) - Method in interface nxopen.cae.PreTestSolutionCollection
Creates an AutoMAC results display builder
License requirements: nx_correl_base ("FE Correlation")
.
createAutomaticCenterlineBuilder() - Method in interface nxopen.annotations.CenterlineCollection
Creates the AutomaticCenterlineBuilder
License requirements: None.
createAutomaticMorphBuilder() - Method in interface nxopen.cae.NodeElementManager
Creates a builder for Automatic Morphing command
License requirements: nx_masterfem ("Finite Element Modeling")
.
createAutomaticTraceline(Explosion, Point, Direction, Point, Direction, Matrix3x3, AutomaticTraceline.ModeOption, int, double, double, int[], double[]) - Method in interface nxopen.TracelineCollection
Create an automatic traceline
License requirements: assemblies ("ASSEMBLIES MODULE")
.
createAutoPairsBuilder(String) - Method in interface nxopen.cae.SimSimulation
Creates a
AutoPairsBuilder
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX5.0.0
Creates an
nxopen.Axis from a
Point and
nxopen.Direction .
Create a non-associative axis
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
createAxis(Axis, Xform, SmartObject.UpdateOption) - Method in interface nxopen.AxisCollection
Creates a
nxopen.Axis using an extract
nxopen.Axis with optional
Xform .
Creates a builder for a kinematic axis
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
createAxisDoubles(Tag, UFSo.UpdateOption, double[], double[]) - Method in interface nxopen.uf.UFSo
createAxisExtract(Tag, UFSo.UpdateOption, Tag, Tag) - Method in interface nxopen.uf.UFSo
createAxisPointDir(Tag, UFSo.UpdateOption, Tag, Tag) - Method in interface nxopen.uf.UFSo
createBackground(View, boolean) - Method in interface nxopen.ViewCollection
createBackingPadBuilder() - Method in interface nxopen.tooling.ProgressiveDieManager
Creates backing pad builder.
createBallGroove(double[], double[], String, String, Tag) - Method in interface nxopen.uf.UFModlFeatures
createBallJointBuilder(BallJoint) - Method in interface nxopen.mechatronics.BallJointCollection
createBalloonNoteBuilder(BalloonNote) - Method in interface nxopen.annotations.PmiAttributeCollection
createBallSlot(double[], double[], double[], String, String, String, Tag, Tag, Tag) - Method in interface nxopen.uf.UFModl
createBaseCflange(UFNxsm.BaseCflangeData) - Method in interface nxopen.uf.UFNxsm
createBaseDataBuilder() - Method in interface nxopen.features.AutomotiveCollection
createBaseDataBuilder() - Method in interface nxopen.features.VehicleDesignCollection
Creates a
BaseDataBuilder
License requirements: nx_general_packaging ("NX General Packaging")
Created in NX9.0.0
Creates a nxopen.features.vehicledesign.BaseDataImportExportBuilder
License requirements: gateway ("UG GATEWAY")
Created in NX9.0.0
createBaseView(ModelingView, Point3d, double, boolean) - Method in interface nxopen.drawings.SheetDraftingViewCollection
For the selected part adds the base view as well as returns the reference to
DraftingView .
Creates the Base View Builder
License requirements: drafting ("DRAFTING")
.
createBcBuilderForBc(SimBC) - Method in interface nxopen.cae.SimSimulation
Creates a BC builder for the BC passed
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
createBcBuilderForConstraintDescriptor(String, String) - Method in interface nxopen.cae.SimSimulation
Creates a BC builder for the constraint descriptor passed
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
createBcBuilderForConstraintDescriptor(String, String, int) - Method in interface nxopen.cae.SimSimulation
Creates a BC builder for the constraint descriptor passed
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
createBcBuilderForLoadDescriptor(String, String) - Method in interface nxopen.cae.SimSimulation
Creates a BC builder for the load descriptor passed
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
createBcBuilderForLoadDescriptor(String, String, int) - Method in interface nxopen.cae.SimSimulation
Creates a BC builder for the load descriptor passed
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
createBcBuilderForSimulationObjectDescriptor(String, String) - Method in interface nxopen.cae.SimSimulation
Creates a BC builder for the simulation object descriptor passed
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
createBcBuilderForSimulationObjectDescriptor(String, String, int) - Method in interface nxopen.cae.SimSimulation
Creates a BC builder for the simulation object descriptor passed
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
createBcSelectionDisplayBuilder() - Method in interface nxopen.cae.SimSimulation
Creates a builder for bc selection display controls command to display bc's selection CAE geometries
with this BC's persistent display color
License requirements: nx_design_sim ("NX Design Simulation")
.
createBcurveThruPoints(UFSo.UpdateOption, int, Tag[], double, int, int, Tag, Tag, int, int) - Method in interface nxopen.uf.UFSo
createBeadFeatureBuilder(nxopen.features.Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
Create a NXSM Bead feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
createBeamEadBuilder() - Method in interface nxopen.cae.NodeElementManager
Creates a builder for the Beam EAD block.
createBend(UFNxsm.BendData) - Method in interface nxopen.uf.UFNxsm
createBendByRadius(Tag, double) - Method in interface nxopen.uf.UFRoute
CreateBendByRadiusData() - Constructor for class nxopen.uf.UFRoute.CreateBendByRadiusData
createBendByRatio(Tag, double) - Method in interface nxopen.uf.UFRoute
CreateBendByRatioData() - Constructor for class nxopen.uf.UFRoute.CreateBendByRatioData
createBendByTable(Tag, String) - Method in interface nxopen.uf.UFRoute
CreateBendByTableData() - Constructor for class nxopen.uf.UFRoute.CreateBendByTableData
createBendFeatureBuilder(nxopen.features.Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
Create a NXSM Bend feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
createBendInsertDesignBuilder() - Method in interface nxopen.tooling.BendInsertDesignCollection
Creates Bend Insert Design builder.
createBendOperation(UFModl.BendOperationData) - Method in interface nxopen.uf.UFModlSmd
createBendOperationBuilder() - Method in interface nxopen.tooling.BendOperationCollection
createBendSegment(String, String, String, FlexibleCableBuilder.BendAngleDirectionOptions, FlexibleCableBuilder.PathAdjustmentAngleDirectionOptions, int) - Method in interface nxopen.features.sheetmetal.FlexibleCableBuilder
Creates a new Features.SheetMetal.FlexibleCableSegment bend segment.
createBendSequence(Tag, int, UFSmd.SeqInput[], int) - Method in interface nxopen.uf.UFSmd
createBendsOfRadialBends() - Method in interface nxopen.formboard.UpdateFormboardBuilder
Creates bends for radial bends after all discrepanices have been fixed.
createBendTaperBuilder(nxopen.features.Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
Create a NXSM Bend taper feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
createBestFitAlignBuilder() - Method in interface nxopen.facet.FacetedBodyCollection
Creates a
BestFitAlignBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_1 ("basic freeform modeling")
Created in NX6.0.0
Creates Design Blank builder
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
createBlankFromBoundary(Tag, int, Tag[], UFCambnd.BoundaryData, UFCambnd.AppData[], double, double, double) - Method in interface nxopen.uf.UFTurn
createBlankGeneratorBuilder() - Method in interface nxopen.tooling.BlankGeneratorCollection
Creates blank generator builder.
createBlankLayoutBuilder() - Method in interface nxopen.tooling.BlankLayoutCollection
Creates create blank layout builder
License requirements: None.
createBlankNestingBuilder() - Method in interface nxopen.tooling.BlankNestingCollection
Creates Dialog builder.
createBlankOption() - Method in interface nxopen.tooling.BlankGeneratorBuilder
Returns the method used to create a blank.
createBlend(String, Tag[], int, int, int, double) - Method in interface nxopen.uf.UFModlFeatures
createBlendCornerBuilder(BlendCorner) - Method in interface nxopen.features.FreeformSurfaceCollection
Creates a
BlendCornerBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX9.0.0
Creates a
BlendCurve3DBuilder
License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING")
Created in NX9.0.0
Creates the blend curves for preview.
createBlendPocketBuilder(BlendPocket) - Method in interface nxopen.features.FeatureCollection
Creates a
BlendPocketBuilder
License requirements: nx_aero_design (" NX Aero Design")
Created in NX9.0.0
Create a blend setback builder object.
createBlock(UFModl.FeatureSigns, Tag, double[], String[]) - Method in interface nxopen.uf.UFModlFeatures
createBlock1(UFModl.FeatureSigns, double[], String[]) - Method in interface nxopen.uf.UFModlFeatures
createBlockCline(UFDrf.Object, UFDrf.Object) - Method in interface nxopen.uf.UFDrf
createBlockFeatureBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
Creates a Block feature builder
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
.
createBodyContactBuilder(BodyContact) - Method in interface nxopen.motion.BodyContactCollection
Creates a
BodyContactBuilder
License requirements: mechanisms ("MECHANISMS")
Created in NX5.0.0
Creates a builder for Bolt Command
License requirements: nx_masterfem ("Finite Element Modeling")
.
createBoltCircleCenterlineBuilder(BoltCircleCenterline) - Method in interface nxopen.annotations.CenterlineCollection
Creates the BoltCircleCenterline builder
License requirements: None.
createBom(RouteManager.BomLevel, RouteManager.BomStockLength, RouteManager.BomFabrication, RouteManager.BomBlankLines, Part) - Method in interface nxopen.routing.RouteManager
Creates Bill of Material (BOM).
createBomBuilder() - Method in interface nxopen.tooling.BomCollection
Creates a BOM builder
License requirements: None.
createBomListBuilder() - Method in interface nxopen.tooling.MoldwizardManager
Creates Bom List builder.
createBooleanBuilder(BooleanFeature) - Method in interface nxopen.features.FeatureCollection
Creates a Boolean builder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.
createBooleanBuilderUsingCollector(BooleanFeature) - Method in interface nxopen.features.FeatureCollection
Creates a Boolean builder.
createBorders() - Method in interface nxopen.drawings.BordersAndZonesBuilder
createBorders() - Method in interface nxopen.drawings.SheetBorderSettingsBuilder
Returns the create borders
License requirements: None.
createBordersAndZonesBuilder(BordersAndZones) - Method in interface nxopen.drawings.BordersAndZonesCollection
Creates a borders and zones builder
License requirements: drafting ("DRAFTING")
.
createBoss(double[], double[], String, String, String, Tag) - Method in interface nxopen.uf.UFModlFeatures
createBoundary(int, Tag, UFBound.Tolerance, int, UFBound.Object[]) - Method in interface nxopen.uf.UFBound
createBoundaryCurve() - Method in interface nxopen.features.RapidSurfaceBuilder
Creates boundary curve
License requirements: studio_free_form ("STUDIO FREE FORM")
.
createBoundaryMemberSet() - Method in interface nxopen.cam.BoundarySet
Create an empty boundary member set
License requirements: cam_base ("CAM BASE")
.
createBoundaryMillingMemberSet() - Method in interface nxopen.cam.BoundaryMillingSet
Create an empty custom member data set for a milling boundary
License requirements: cam_base ("CAM BASE")
.
createBoundaryMillingSet() - Method in interface nxopen.cam.Boundary
Create an empty milling boundary set
License requirements: cam_base ("CAM BASE")
.
createBoundarySet() - Method in interface nxopen.cam.Boundary
Create an empty boundary set
License requirements: cam_base ("CAM BASE")
.
createBoundaryTurnSet() - Method in interface nxopen.cam.Boundary
Create an empty turning boundary set
License requirements: cam_base ("CAM BASE")
.
createBoundBox() - Method in interface nxopen.tooling.TrimSolidBuilder
Creates the bounding box.
createBoundedPlaneBuilder(BoundedPlane) - Method in interface nxopen.features.FeatureCollection
Creates a
BoundedPlaneBuilder
License requirements: nx_freeform_1 ("basic freeform modeling")
Created in NX6.0.0
Returns the CreateBoxCollection instance belonging to this part .
CreateBoxBuilder - Interface in nxopen.tooling
createBoxBuilder(NXObject) - Method in interface nxopen.tooling.CreateBoxCollection
Creates a
CreateBoxBuilder
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard") OR studio_free_form ("STUDIO FREE FORM") OR die_engineering ("DIE ENGINEERING")
Created in NX8.0.0
the type for creating box
CreateBoxCollection - Interface in nxopen.tooling
Creates CreateBoxBuilder collection
To obtain an instance of this class, refer to
ToolingManager
Created in NX8.0.0
Creates a
BoxSearchTerm and
adds it to the recipe at the end of the list of search terms.
Create a NXSM Break Corner feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
createBreakingConstraintBuilder(BreakingConstraint) - Method in interface nxopen.mechatronics.BreakingConstraintCollection
createBreakout(Tag, UFDraw.BreakoutData) - Method in interface nxopen.uf.UFDraw
createBreakRegion(Tag, Tag, int, UFDraw.BreakRegionBoundary[]) - Method in interface nxopen.uf.UFDraw
createBreaks() - Method in interface nxopen.annotations.BreakSettingsBuilder
Returns the create breaks option
License requirements: None.
createBridgeCurve(int, Tag[], double[], int[]) - Method in interface nxopen.uf.UFCurve
createBridgeCurveBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
createBridgeCurveBuilderEx(BridgeCurve) - Method in interface nxopen.features.FeatureCollection
Creates a
BridgeCurveBuilderEx
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_1 ("basic freeform modeling")
Created in NX8.5.0
Creates a
BridgeFacetBodyBuilder
License requirements: studio_free_form ("STUDIO FREE FORM") OR die_engineering ("DIE ENGINEERING")
Created in NX9.0.0
Creates a
BridgeSurfaceBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX8.0.0
Creates a
BridgeTransitionBuilder
License requirements: nx_flexible_pcb ("NX Flexible PCB") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
Created in NX5.0.2
Creates a
BrokenViewBuilder
License requirements: drafting ("DRAFTING")
Created in NX7.5.0
Creates a Relinker builder
License requirements: wave ("WAVE FUNCTIONALITY")
.
createBuilder(AdaptivityMetaSolution) - Method in interface nxopen.cae.AdaptivityMetaSolutionCollection
Creates the builder object of adaptivity meta solution.
createBuilder(TaggedObject) - Method in interface nxopen.cae.CfdContactPreventionConstraintCollection
Creates a local resolution constraint builder
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")
.
createBuilder(TaggedObject) - Method in interface nxopen.cae.CfdLocalResolutionConstraintCollection
Creates a local resolution constraint builder
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")
.
createBuilder(FluidDomainRecipe) - Method in interface nxopen.cae.FluidDomainCollection
Creates a fluid domain recipe builder
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")
.
createBuilder(MeshControl) - Method in interface nxopen.cae.MeshControlCollection
Creates a mesh control builder for the mesh control object
License requirements: nx_masterfem ("Finite Element Modeling")
.
createBuilder() - Method in interface nxopen.cae.MeshControlDisplayManager
Creates a builder for node element info command
License requirements: nx_masterfem ("Finite Element Modeling")
.
createBuilder() - Method in interface nxopen.geometricutilities.LocalUntrimManager
Creates local untrim and extend builder.
createBuilder(NXObject) - Method in interface nxopen.mechatronics.ProxyOverrideObjectCollection
createBuilder(Line, Line, double, Point3d, Point3d, boolean, boolean) - Method in interface nxopen.routing.GapDisplayBuilder
Takes selected line, gap start and end points, and gap
type settings in to initialise builder data.
createBuilder(AddReusableFeatureCollection.InputData) - Method in interface nxopen.tooling.AddReusableFeatureCollection
Creates a AddReusableFeature builder
License requirements: None.
createBuilder() - Method in interface nxopen.tooling.AddReusablePartCollection
Creates a AddReusablePart builder
License requirements: None.
createBuilder() - Method in interface nxopen.tooling.AssignPatchCollection
Creates a AssignPatch builder
License requirements: None.
createBuilder() - Method in interface nxopen.tooling.CalculateAreaCollection
Creates a CalculateArea builder
License requirements: None.
createBuilder() - Method in interface nxopen.tooling.EdgePatchCollection
Creates a EdgePatch builder
License requirements: None.
createBuilder() - Method in interface nxopen.tooling.FastenerAssemConfigCollection
Creates a FastenerAssemConfig builder
License requirements: None.
createBuilder() - Method in interface nxopen.tooling.FastenerAssyCollection
Creates a FastenerAssy builder
License requirements: None.
createBuilder() - Method in interface nxopen.tooling.FastenerAssyCustomizationCollection
Creates a FastenerAssyCustomization builder
License requirements: None.
createBuilder() - Method in interface nxopen.tooling.GuidedExtensionManager
Creates a GuidedExtension builder
License requirements: None.
createBuilder() - Method in interface nxopen.tooling.InitProjectCollection
Creates a InitProject builder
License requirements: None.
createBuilder() - Method in interface nxopen.tooling.ManufacturingGeometryCollection
Creates a ManufacturingGeometry builder.
createBuilder() - Method in interface nxopen.tooling.MWCopySheetsCollection
Creates a MWCopySheets builder
License requirements: None.
createBuilder() - Method in interface nxopen.tooling.MWDefineRegionsCollection
Creates a MWDefineRegions builder
License requirements: None.
createBuilder() - Method in interface nxopen.tooling.MWDefineSheetsCollection
Creates a MWDefineSheets builder
License requirements: None.
createBuilder() - Method in interface nxopen.tooling.MWDesignGuideLinesCollection
Creates a MWDesignGuideLines builder
License requirements: None.
createBuilder() - Method in interface nxopen.tooling.MWDesignPartingSurfaceCollection
Creates a MWDesignPartingSurface builder
License requirements: None.
createBuilder() - Method in interface nxopen.tooling.MWPartingManagerCollection
Creates a MWPartingManager builder
License requirements: None.
createBuilder() - Method in interface nxopen.tooling.MWSearchRegionCollection
Creates a MWSearchRegion builder
License requirements: None.
createBuilder() - Method in interface nxopen.tooling.MWTraversePartingLinesCollection
Creates a MWTraversePartingLines builder
License requirements: None.
createBuilder() - Method in interface nxopen.tooling.SolidPatchCollection
Creates a SolidPatch builder
License requirements: None.
createBuilder() - Method in interface nxopen.tooling.SpecifyBaffleCollection
Creates a SpecifyBaffle builder
License requirements: None.
createBuilder() - Method in interface nxopen.tooling.SpecifyCircuitCollection
Creates a SpecifyCircuit builder
License requirements: None.
createBuilder() - Method in interface nxopen.tooling.TraverseLoopCollection
Creates a TraverseLoop builder
License requirements: None.
createBuilder() - Method in interface nxopen.tooling.WallThicknessCheckerManager
Creates a WallThicknessChecker builder
License requirements: None.
createBuiltInPath(Curve[]) - Method in interface nxopen.routing.BuiltInPathCollection
createBuiltInPath(Tag, int, Tag[], String) - Method in interface nxopen.uf.UFRoute
createBuiltUpManModeBuilder() - Method in interface nxopen.features.ShipCollection
Creates a
BuiltUpManModeBuilder
License requirements: nx_ship_mfg_prep ("Ship Manufacturing")
Created in NX9.0.0
Create a list to generate a single bulkHead.
createBulkHeadsBuilder(Feature) - Method in interface nxopen.features.ShipCollection
Creates a
BulkHeadsBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
Created in NX5.0.0
Creates a
BumperPendulumBuilder
License requirements: nx_general_packaging ("NX General Packaging")
Created in NX9.0.0
Creates burring insert builder.
createBushingBuilder(Bushing) - Method in interface nxopen.motion.BushingCollection
Return
BushingBuilder object
License requirements: mechanisms ("MECHANISMS")
Created in NX6.0.0
Creates a builder for the Bushing EAD block.
createByPartsFilter(PmiFilter.ComponentMethod, Component[]) - Method in interface nxopen.annotations.PmiFilterCollection
Creates a PMI filter defined by a set of components
License requirements: geometric_tol ("GDT")
.
createByTypesFilter(PmiFilter.ComponentMethod, Component[], PmiFilterByType.Type[]) - Method in interface nxopen.annotations.PmiFilterCollection
Creates a PMI filter defines by a set of PMI types.
createByViewsFilter(PmiFilter.ComponentMethod, Component[], String[]) - Method in interface nxopen.annotations.PmiFilterCollection
Creates a PMI filter defined by a set of model views.
createCablewaysBuilder() - Method in interface nxopen.routing.RouteManager
createCablewaysLayoutBuilder() - Method in interface nxopen.routing.RouteManager
createCaeRegion(String, String, int) - Method in interface nxopen.cae.CaeRegionCollection
Creates a CAE.CaeRegion
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX7.0.0
createCaeRegionBuilder(String, CaeRegion) - Method in interface nxopen.cae.SimSimulation
Creates a
CaeRegionBuilder
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX7.0.0
Creates a CAE.CAESet
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX4.0.0
createCagePolylineBuilder(Polyline) - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
createCallback(UserDefinedFeatureCreateEvent) - Method in interface nxopen.features.UserDefinedFeatureClass.CreateCallback
Prototype for create callbacks
License requirements: None.
createCalloutGroupBuilder() - Method in interface nxopen.annotations.IdSymbolCollection
Creates a nxopen.annotations.CalloutGroupBuilder
License requirements: drafting ("DRAFTING")
Created in NX7.5.0
createCamBuilder(Cam) - Method in interface nxopen.mechatronics.CamCollection
createCameraBuilder(Camera) - Method in interface nxopen.display.CameraCollection
createCameraBuilder(View, Layout, Camera) - Method in interface nxopen.display.CameraCollection
createCameraListItemBuilder() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
createCamGeneralPropertiesBuilder(NXObject[]) - Method in interface nxopen.PropertiesManager
createCamPreferences() - Method in interface nxopen.cam.CAMSession
Create Cam Preferences builder.
createCamProfileBuilder(CamProfile) - Method in interface nxopen.mechatronics.CamProfileCollection
createCamSession() - Method in interface nxopen.Session
Create the CAM session
License requirements: None.
createCamSetup(String) - Method in interface nxopen.Part
Creates CAM setup
License requirements: cam_base ("CAM BASE")
.
createCarCsys(Point3d, Matrix3x3) - Method in interface nxopen.HumanPosturePredictionBuilder
Create the Car Coordinate System, only one Car Coordinate System is allowed in a part or an assembly
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
createCategory(String, String, int[]) - Method in interface nxopen.layer.CategoryCollection
Creates a new layer category
License requirements: None.
createCategory(UFLayer.CategoryInfo) - Method in interface nxopen.uf.UFLayer
createCatiav4Creator() - Method in interface nxopen.DexManager
Create the IgesCreator
License requirements: None.
createCatiav4Importer() - Method in interface nxopen.DexManager
Create the Catiav4Importer
License requirements: None.
createCatiav5Creator() - Method in interface nxopen.DexManager
Create the IgesCreator
License requirements: None.
createCatiav5Importer() - Method in interface nxopen.DexManager
Create the Catiav5Importer
License requirements: None.
createCavityMillingBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
Creates a planar milling cavity operation builder
License requirements: cam_base ("CAM BASE")
.
createCBoreHole(double[], double[], String, String, String, String, String, Tag, Tag) - Method in interface nxopen.uf.UFModlFeatures
createCdf() - Method in interface nxopen.CGMBuilder
Creates and returns a
CDF object representing the Color Palette.
Creates and returns a
CDF object representing the Color Palette.
Creates and returns a
CDF object representing the Color Palette.
Creates a cell builder
License requirements: None.
createCenterLine() - Method in interface nxopen.weld.WeldPointBuilder
To create center line
License requirements: ugweld ("UG WELD")
.
createCenterline2dBuilder(Centerline2d) - Method in interface nxopen.annotations.CenterlineCollection
Creates the 2D Centerline builder
License requirements: None.
createCenterline3dBuilder(Centerline3d) - Method in interface nxopen.annotations.CenterlineCollection
Creates the 3D Centerline builder
License requirements: None.
createCenterlineDrillTurningBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
Creates a centerline drill turning operation builder
License requirements: cam_base ("CAM BASE")
.
createCenterMarkBuilder(CenterMark) - Method in interface nxopen.annotations.CenterlineCollection
Creates the CenterMark Builder
License requirements: None.
createCgfxMattexBuilder(TaggedObject) - Method in interface nxopen.display.CgfxMattexCollection
createCgmBuilder() - Method in interface nxopen.PlotManager
Create the CGMBuilder
License requirements: None.
createCgmImporter() - Method in interface nxopen.ImportManager
Creates a CGM importer object.
createChamfer(int, String, String, String, Tag[]) - Method in interface nxopen.uf.UFModeling
createChamferBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
Creates a Chamfer feature builder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.
createChamferDim(UFDrf.Object, UFDrf.Object, UFDrf.Text, double[]) - Method in interface nxopen.uf.UFDrf
createChamferDimension(DimensionData, Point3d) - Method in interface nxopen.annotations.DimensionCollection
Creates a chamfer dimension
License requirements: drafting ("DRAFTING")
.
createChamferDimensionBuilder(BaseChamferDimension) - Method in interface nxopen.annotations.DimensionCollection
createChamferMillingBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
Creates a Chamfer Milling operation builder
License requirements: cam_base ("CAM BASE")
.
createChangeMaterialBuilder(ChangeMaterial) - Method in interface nxopen.mechatronics.ChangeMaterialCollection
createChangeoverManagementBuilder() - Method in interface nxopen.tooling.WorkflowManagementCollection
Creates changeover management builder.
createChangeOwnerBuilder() - Method in interface nxopen.mechatronics.PhysicsManager
createChangeShellThicknessBuilder(ChangeShellThickness) - Method in interface nxopen.features.FeatureCollection
Creates a
ChangeShellThicknessBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
Created in NX6.0.0
Creates a Tooling.ChannelAdjustBuilder
License requirements: None.
createChannelFittingBuilder() - Method in interface nxopen.tooling.ChannelFittingCollection
Creates a Tooling.ChannelFittingBuilder
License requirements: None.
createCharacteristicsBuilder(NXObject, int) - Method in interface nxopen.weld.WeldManager
createCharacteristicsBuilder(NXObject, CharacteristicsBuilder.Type) - Method in interface nxopen.weld.WeldManager
createCheckingBuilder() - Method in interface nxopen.tooling.ElectrodeDesignCollection
Creates electrode checking builder
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
createChild() - Method in interface nxopen.die.FlangeSteelRibParentBuilder
Creates a child Flange Steel Rib.
createChild() - Method in interface nxopen.die.HandlingCoreParentBuilder
Creates a child handling core.
createChild() - Method in interface nxopen.die.HoleParentBuilder
Creates a child hole.
createChild() - Method in interface nxopen.die.KeywayParentBuilder
Creates a child keyway.
createChild() - Method in interface nxopen.die.PadParentBuilder
Creates a child pad.
createChild() - Method in interface nxopen.die.PierceHoleParentBuilder
Creates a child pierce hole
License requirements: ug_die_design ("Die Design")
.
createChild() - Method in interface nxopen.die.PointParentBuilder
Creates a child point.
createChild() - Method in interface nxopen.die.PressureSystemParentBuilder
Creates a child pressure system.
createChild() - Method in interface nxopen.die.RibParentBuilder
Creates a child rib.
createChild() - Method in interface nxopen.die.SteelInsertSegmentParentBuilder
Creates a child siseg
License requirements: ug_die_design ("Die Design")
.
createChild() - Method in interface nxopen.die.ThroatParentBuilder
Creates a child throat section.
createChild() - Method in interface nxopen.die.WearPlateLocParentBuilder
Creates a child wear plate and locator
License requirements: ug_die_design ("Die Design")
.
createChildRule(String, String, RuleManager.ParameterRule[]) - Method in interface nxopen.RuleManager
Create a child rule and the root for this rule manager's part.
createChildRule(Tag, String, String, String, int, String[], String[]) - Method in interface nxopen.uf.UFKf
createCircle(Point2d, double) - Method in interface nxopen.markup.MarkupFileObjectCollection
Creates a nxopen.Markup.Circle
License requirements: None.
createCircularAboutAxisMoveBuilder(Move) - Method in interface nxopen.cam.MoveCollection
Create a Circular Move.
createCircularBlendCurveBuilder(CircularBlendCurve) - Method in interface nxopen.features.FeatureCollection
createCircularCenterlineBuilder(CircularCenterline) - Method in interface nxopen.annotations.CenterlineCollection
Creates the CircularCenterline builder
License requirements: None.
createCircularEdgeMethod(CAEEdge[], double, double, boolean) - Method in interface nxopen.cae.SmartSelectionManager
Creates a circular edge method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createCircularEdgeMethod(CAEFace, double, double, boolean) - Method in interface nxopen.cae.SmartSelectionManager
Creates a circular edge method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createCircularEdgeMethod(CAEFace[], double, double, boolean) - Method in interface nxopen.cae.SmartSelectionManager
Creates a circular edge method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createCircularEdgeMethod(CAEBody, double, double, boolean) - Method in interface nxopen.cae.SmartSelectionManager
Creates a circular edge method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createCircularEdgeMethod(CAEBody[], double, double, boolean) - Method in interface nxopen.cae.SmartSelectionManager
Creates a circular edge method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createCircularImprintBuilder() - Method in interface nxopen.cae.AbstractionManager
Creates a builder for abstraction Command
License requirements: nx_masterfem ("Finite Element Modeling")
.
createCircularIset(int, double[], double[], String, String, Tag[]) - Method in interface nxopen.uf.UFModlGeneral
createCircularMotion(UFVariant, UFPath.CircularMotion) - Method in interface nxopen.uf.UFPath
createCircularOffsetPath(ISegment[], boolean, Stock[], boolean, boolean, OffsetPathCollection.BendType, boolean, double, double, boolean, boolean, Vector3d, Vector3d, Point3d, double, double, int, double) - Method in interface nxopen.routing.OffsetPathCollection
Creates a circular offset path.
CreateCircularOffsetPathData() - Constructor for class nxopen.routing.OffsetPathCollection.CreateCircularOffsetPathData
createCircularPatternFace(UFModl.DfoRegion, Tag, int, String) - Method in interface nxopen.uf.UFModlFeatures
createCircularTarget(CircularTargetData, PmiData, Xform, Point3d, LeaderBundle) - Method in interface nxopen.annotations.DatumTargetCollection
Creates a PMI circular target
License requirements: geometric_tol ("GDT")
.
createClamp(UFVariant, UFPath.ClampStatus, UFPath.Axis, String) - Method in interface nxopen.uf.UFPath
createClass(String) - Method in interface nxopen.features.UserDefinedFeatureClassManager
createCleanupFacetBodyBuilder() - Method in interface nxopen.facet.FacetModelingCollection
createCleanUpUtilityBuilder() - Method in interface nxopen.features.sheetmetal.SheetmetalManager
Creates a
CleanUpUtilityBuilder
License requirements: nx_sheet_metal ("NX Sheet Metal")
Created in NX7.5.0
Creates burring insert builder.
createClearanceZoneExpression(String) - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder
Create an expression using the Clearance Zone naming convention.
createClippingParameters() - Method in interface nxopen.cae.ResultManager
Creates a clipping parameter object.
createClockingBuilder(int, int) - Method in interface nxopen.geometricutilities.PatternDefinition
Creates a pattern clocking object
License requirements: None.
createClockPartBuilder(NXObject) - Method in interface nxopen.routing.RouteManager
createCloneObject(ToolingApplication, String) - Method in interface nxopen.tooling.AddReusablePart
Creates the clone operation object
License requirements: None.
createCloneObject(ToolingApplication, ToolingCloneaction) - Method in interface nxopen.tooling.ToolingSession
Creates the clone operation object
License requirements: None.
createCloneObjectOfMsetPart() - Method in interface nxopen.tooling.ElectrodeInitializationBuilder
Creates clone object of machine set part.
createCloneObjectOfTopPart() - Method in interface nxopen.tooling.ElectrodeInitializationBuilder
Creates clone object of top part.
createCloneObjectOfWorkingPart() - Method in interface nxopen.tooling.ElectrodeInitializationBuilder
Creates clone object of working part.
createClonePartItem(String) - Method in interface nxopen.tooling.CloneObject
Creates a new clone part item.
createClosedCorner(UFNxsm.ClosedCornerData) - Method in interface nxopen.uf.UFNxsm
createClosedCornerFeatureBuilder(nxopen.features.Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
Create a NXSM Closed Corner feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
createCloseRangeVisibilityBuilder(Feature) - Method in interface nxopen.features.AutomotiveCollection
createCloseRangeVisibilityBuilder(CloseRangeVisibility) - Method in interface nxopen.features.VehicleDesignCollection
createCoaxialBuilder(Coaxial) - Method in interface nxopen.features.FeatureCollection
Creates a
CoaxialBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
Created in NX6.0.0
Creates a coincident constraint
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
createCollector() - Method in interface nxopen.cae.ElementCreateBuilder
Create mesh collector
License requirements: nx_masterfem ("Finite Element Modeling")
.
createCollector() - Method in interface nxopen.ScCollectorCollection
Create a sc collector.
createCollectorBuilder(MeshCollector, String) - Method in interface nxopen.cae.MeshManager
Creates a mesh collector builder for the mesh collector object
License requirements: nx_masterfem ("Finite Element Modeling")
.
createCollinearConstraint(Sketch.ConstraintGeometry, Sketch.ConstraintGeometry) - Method in interface nxopen.Sketch
Creates a collinear constraint.
createCollisionBodyBuilder(CollisionBody) - Method in interface nxopen.mechatronics.CollisionBodyCollection
createCollisionMaterialBuilder(CollisionMaterial) - Method in interface nxopen.mechatronics.CollisionMaterialCollection
createCollisionPairBuilder() - Method in interface nxopen.sim.KinematicConfigurator
Creates a collision pair builder
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
createCollisionSensorBuilder(CollisionSensor) - Method in interface nxopen.mechatronics.CollisionSensorCollection
createColorFaceBuilder() - Method in interface nxopen.features.FeatureCollection
createColorFeatureBuilder() - Method in interface nxopen.features.FeatureCollection
Creates a nxopen.features.ColorFeatureBuilder
License requirements: None.
createColorFeatureGroupBuilder() - Method in interface nxopen.features.FeatureCollection
Creates a nxopen.features.ColorFeatureGroupBuilder
License requirements: None.
createColumn(double, UFPlist.ColPrefs, UFPlist.ColumnType) - Method in interface nxopen.uf.UFPlist
createColumn(double) - Method in interface nxopen.uf.UFTabnot
createComacViewerBuilder() - Method in interface nxopen.cae.CorrelSolutionCollection
Creates the builder object of correl comac matrix viewer
License requirements: nx_correl_base ("FE Correlation")
.
createCombineCurves(Tag, UFCurve.CombineCurvesDirection, Tag, UFCurve.CombineCurvesDirection, String) - Method in interface nxopen.uf.UFCurve
createCombinedLoadCase(String, int, Tag[], double[]) - Method in interface nxopen.uf.UFSf
createCombinedProjectionBuilder(CombinedProjection) - Method in interface nxopen.features.FeatureCollection
createCombineFacetBodyBuilder() - Method in interface nxopen.facet.FacetModelingCollection
createCombineTrisBuilder() - Method in interface nxopen.cae.NodeElementManager
Creates a builder for Combine Tris.
createCompanionResultBuilder(CompanionResult) - Method in interface nxopen.cae.CompanionResultCollection
Creates a
CompanionResultBuilder
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX7.5.0
Creates a
CompareModeBuilder
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
Created in NX8.0.0
Creates a nxopen.drawings.CompareReportBuilder
License requirements: drafting ("DRAFTING")
Created in NX7.5.0
createCompareRunsBuilder(Run) - Method in interface nxopen.routing.RouteManager
Creates a
CompareRunsBuilder to compare runs in the working part
to another part or an xml definition.
Creates an empty complex matrix record which section data is complex data.
createComponentBuilder(KinematicComponent, KinematicComponent) - Method in interface nxopen.sim.KinematicComponentCollection
Creates a builder for a kinematic component
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder") OR resource_manager_nx ("Teamcenter Resource Manager")
.
createComponentBuilder() - Method in interface nxopen.tooling.ElectrodeDesignCollection
Creates EW component builder
License requirements: None.
createComponentData(Annotation) - Method in interface nxopen.annotations.AnnotationManager
createComponentDrawingBuilder() - Method in interface nxopen.tooling.ToolingDrawingCollection
Creates create component drawing builder
License requirements: None.
createComponentDrawingCopyAttribute(NXObject, String, String, String, String, String[], String[]) - Method in interface nxopen.tooling.CompDrawingBuilder
Creates a drawing for a component and copy attribute to the drawing part
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
createComponentPart(Tag, String, String, String, int, int, double[], double[], int, Tag[]) - Method in interface nxopen.uf.UFAssem
createComponentPart(Tag, String, String, String, int, int, double[], double[], int, Tag[], String) - Method in interface nxopen.uf.UFUgmgr
createComponentPatternBuilder(ComponentPattern) - Method in interface nxopen.assemblies.ComponentAssembly
createComponents(int, NXObject) - Method in interface nxopen.tooling.AddReusablePart
Creates an array instance of a component
License requirements: None.
createCompositeCurveBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
Creates a
CompositeCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT")
Created in NX5.0.0
Creates a new compound datum dialog
License requirements: geometric_tol ("GDT")
.
createCompoundWeldBuilder(CompoundWeld) - Method in interface nxopen.weld.WeldManager
createConcaveFacesBuilder(ConcaveFaces) - Method in interface nxopen.features.FeatureCollection
Creates a
ConcaveFacesBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX7.5.0
Creates a concentric circle dimension
License requirements: drafting ("DRAFTING")
.
createConcentricConstraint(Sketch.ConstraintGeometry, Sketch.ConstraintGeometry) - Method in interface nxopen.Sketch
Creates a concentric constraint.
createConceptFromSpreadsheetBuilder(nxopen.features.shipdesign.ConceptFromSpreadsheet) - Method in interface nxopen.features.ShipCollection
Creates a nxopen.features.shipdesign.ConceptFromSpreadsheetBuilder
License requirements: nx_ship_concept ("Ship Concept")
Created in NX8.5.0
createConceptPositionBuilder() - Method in interface nxopen.tooling.ConceptPositionCollection
Creates a ConceptPosition builder
License requirements: None.
createConcirDim(UFDrf.Object, UFDrf.Object, UFDrf.Text, double[]) - Method in interface nxopen.uf.UFDrf
createConcurrentDesignManagementBuilder() - Method in interface nxopen.tooling.WorkflowManagementCollection
Create Concurrent Design Management builder.
createCone(UFModl.FeatureSigns, Tag, double[], String, String[], double[]) - Method in interface nxopen.uf.UFModlFeatures
createCone1(UFModl.FeatureSigns, double[], String, String[], double[]) - Method in interface nxopen.uf.UFModlFeatures
createConeBuilder(Cone) - Method in interface nxopen.features.FeatureCollection
Creates a
ConeBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX6.0.0
Creates a conflict resolution builder for this input pair of BCs
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
createConic(UFCurve.Conic) - Method in interface nxopen.uf.UFCurve
createConnectedCurvesBuilder() - Method in interface nxopen.routing.RouteManager
createConnectedFaceFinderBuilder(nxopen.features.Feature[]) - Method in interface nxopen.weld.WeldManager
Creates a builder for running the Connected Face Finder utility.
createConnectedFaceFinderOperation() - Method in interface nxopen.weld.WeldManager
Creates a builder for running the Connected Face Finder utility.
createConnectionPostPlacementUdo(ReuseLibrary.PartType, int, ReuseLibrary.ReportInBom, CharacteristicList, PortConnection[]) - Method in interface nxopen.routing.RouteManager
Creates a user defined object (UDO) linked to one or two connections.
createConnectorDevice(ConnectorDevice.ComponentType, String) - Method in interface nxopen.routing.electrical.ConnectorDeviceCollection
createConnectorDevice(HarnessDevice, String, String, ConnectorDevice.ComponentType) - Method in interface nxopen.routing.electrical.ConnectorDeviceCollection
Finds or Creates a
ConnectorDevice for given equipmentName and or
connectorName.
Creates a
ConnectPathBuilder which connects path
License requirements: routing_base ("Routing Basic")
Created in NX6.0.2
Creates a constant angle constraint
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
createConstantLengthConstraint(Sketch.ConstraintGeometry) - Method in interface nxopen.Sketch
Creates a constant length constraint
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
createConstrainedIsetArray(UFAssem.IsetArrayData) - Method in interface nxopen.uf.UFAssem
createConstrainedSegment(ControlPoint, ControlPoint) - Method in interface nxopen.routing.SegmentManager
createConstraint(String, String) - Method in interface nxopen.cae.SimConstraintCollection
Creates a Constraint for the constraint descriptor passed
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
createConstraint() - Method in interface nxopen.features.DatumBuilder
Creates a new empty constraint object.
createConstraint(boolean) - Method in interface nxopen.positioning.Positioner
createConstraint() - Method in interface nxopen.positioning.Positioner
createConstraintBuilder(DAOConstraint) - Method in interface nxopen.cae.optimization.DAOSolution
Creates the builder object of optimization solution design constraint
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
createConstraintBuilder(DAOConstraint) - Method in interface nxopen.cae.optimization.DAOSolutionCollection
createConstraintBuilder() - Method in interface nxopen.SketchCollection
Creates a
SketchConstraintBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
Created in NX8.5.0
Creates a constraint group for a solution or solution step
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
createConstraintGroupBuilder(nxopen.positioning.ComponentConstraintGroup, Component) - Method in interface nxopen.assemblies.ComponentAssembly
Creates a nxopen.positioning.ComponentConstraintGroupBuilder object.
createConstraintReference(NXObject, NXObject, boolean, boolean) - Method in interface nxopen.positioning.Constraint
Adds geometry to a constraint and sets the movable object
to be constrained.
createConstraintReference(NXObject, NXObject, boolean, boolean, boolean) - Method in interface nxopen.positioning.Constraint
Adds geometry to a constraint and sets the movable object
to be constrained.
createConstraintResolutionBuilder(SimGroupContainer, SimConstraint, SimConstraint) - Method in interface nxopen.cae.SimSolution
createContactMesh(Tag, UFSf.ContactMeshData, UFSf.OrientationData) - Method in interface nxopen.uf.UFSf
createContactMeshBuilder(Mesh1d) - Method in interface nxopen.cae.MeshManager
Creates a
ContactMeshBuilder
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX10.0.0
Create a NXSM Contour Flange feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
createControlPoint(int, Point, CartesianCoordinateSystem, int, boolean, NXObject, int) - Method in interface nxopen.cam.LaserProfileMove
Create a new Laser Control Point
License requirements: cam_base ("CAM BASE")
.
createControlPoint(Point3d, ControlPointCollection.CheckExisting) - Method in interface nxopen.routing.ControlPointCollection
createControlPoint(Port, ControlPointCollection.CheckExisting) - Method in interface nxopen.routing.ControlPointCollection
createControlPoint(TaggedObject, double, ControlPointCollection.CheckExisting) - Method in interface nxopen.routing.ControlPointCollection
Creates a
ControlPoint at the given object and normalized parameter.
Creates a builder to convert from MCD
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
createConvertFromMtbbuilder() - Method in interface nxopen.mechatronics.PhysicsManager
createConvertToFromReferenceBuilder() - Method in interface nxopen.SketchCollection
Creates a
ConvertToFromReferenceBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
Created in NX5.0.0
Create a NXSM Convert To Sheetmetal feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
createCoolantOff(UFVariant, String) - Method in interface nxopen.uf.UFPath
createCoolantOn(UFVariant, UFPath.CoolantType, String) - Method in interface nxopen.uf.UFPath
createCoolingConnectBuilder() - Method in interface nxopen.tooling.CoolingConnectCollection
Creates a Tooling.CoolingConnectBuilder
License requirements: None.
createCoolingDefineChannelBuilder() - Method in interface nxopen.tooling.CoolingDefineChannelCollection
Creates Tooling.CoolingDefineChannelBuilder
License requirements: None.
createCoolingExtendBuilder() - Method in interface nxopen.tooling.CoolingExtendCollection
Creates a Tooling.CoolingExtendBuilder
License requirements: None.
createCoolingFittingData() - Method in interface nxopen.tooling.ChannelFittingBuilder
Creates the Cooling Fitting Data object.
createCoolingFittingData() - Method in interface nxopen.tooling.SpecifyCircuitBuilder
Creates the cooling fitting data object.
createCoolingPatternBuilder() - Method in interface nxopen.tooling.CoolingPatternCollection
Creates Tooling.CoolingPatternBuilder
License requirements: None.
createCoordinateNoteBuilder(CoordinateNote) - Method in interface nxopen.annotations.PmiAttributeCollection
createCoordinateSystem(Point3d, Matrix3x3, boolean) - Method in interface nxopen.CoordinateSystemCollection
Creates a new cartesian coordinate system
License requirements: None.
createCoordinateSystem(Point3d, Vector3d, Vector3d) - Method in interface nxopen.CoordinateSystemCollection
Creates a new cartesian coordinate system
License requirements: None.
createCoordinateSystem(Point3d, NXMatrix, boolean) - Method in interface nxopen.CoordinateSystemCollection
Creates a new cartesian coordinate system
License requirements: None.
createCoordinateSystem(Xform, SmartObject.UpdateOption) - Method in interface nxopen.CoordinateSystemCollection
Creates a CartesianCoordinateSystem from a Xform and update option.
createCopeCornerBuilder(NXObject) - Method in interface nxopen.routing.RouteManager
createCoplanarBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
Creates a coplanar builder, don't use it until nx6
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
.
createCopyCageBuilder() - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
createCopyCutBuilder() - Method in interface nxopen.ClipboardOperationsManager
Creates a Copy Cut builder object.
createCopyFace() - Method in interface nxopen.geometricutilities.LocalUntrimBuilder
Creates the extracted face when the flag of Edit a Copy is turned on or a solid body face is selected.
createCopyFaceBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
Creates a copy face builder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
.
createCopyInPart(BasePart) - Method in interface nxopen.fields.Field
Copy the field to the target part.
createCopyObjectsBuilder(Component) - Method in interface nxopen.features.ShipCollection
Creates a
CopyObjectsBuilder
License requirements: nx_ship_basic ("Ship Basic Design")
Created in NX10.0.0
Creates a
CopyPasteBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX6.0.0
Creates a
CopyPasteBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX8.0.0
Creates a
CopyPasteNewBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
Created in NX8.0.0
Create a bend corner object at a Control Point.
createCorner(ControlPoint, double, int) - Method in interface nxopen.routing.MiteredBendCornerCollection
Create a mitered bend corner object at a Control Point.
createCornerBuilder() - Method in interface nxopen.SketchCollection
Creates a
SketchCornerBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
Created in NX5.0.0
Creates a S-Bend corner between the start rcp and end rcp using a
bend radius.
createCornerByBendRatio(ControlPoint, ControlPoint, double, int) - Method in interface nxopen.routing.SBendCornerCollection
Creates a S-Bend corner between the start rcp and end rcp using a
bend ratio.
createCornerBySegBendRadius(ControlPoint, ControlPoint, SplineSegment, int, double) - Method in interface nxopen.routing.SBendCornerCollection
Creates a S-Bend corner between the start rcp and end rcp using a
SplineSegment and a bend radius.
Creates a S-Bend corner between the start rcp and end rcp using a
SplineSegment and a bend ratio.
Creates a
CornerCutBuilder
License requirements: nx_ship_detail ("Ship Detail Design")
Created in NX8.5.0
Creates Corner Design builder.
createCorrelApplyAlignmentFromBuilder(SimSolution) - Method in interface nxopen.cae.CorrelManager
createCorrelFineTuneAlignmentBuilder(SimSolution) - Method in interface nxopen.cae.CorrelManager
createCorrelMethodBuilder() - Method in interface nxopen.cae.ModelUpdateSolution
Creates the builder object of model update correlation method
License requirements: nx_correl_update ("FE Model Update")
.
createCouplerCableBuilder(CouplerCable) - Method in interface nxopen.motion.CouplerCollection
Creates the builder object of
CouplerCable object
License requirements: mechanisms ("MECHANISMS")
Created in NX6.0.0
Creates the builder object of
CouplerGear object
License requirements: mechanisms ("MECHANISMS")
Created in NX6.0.0
Creates the builder object of
CouplerRckpn object
License requirements: mechanisms ("MECHANISMS")
Created in NX6.0.0
Creates a
CrashBarrierBuilder
License requirements: nx_general_packaging ("NX General Packaging")
Created in NX9.0.0
Creates a new empty
CharacteristicList object that can be used
as input to
Preferences.RoutingPartLibrary#matchCriteria and
Preferences.RoutingPartLibrary#matchCriteriaWithFilter .
Create search criteria object in search model view builder
License requirements: None.
createCrosshatch(int, int[], Tag[], Tag) - Method in interface nxopen.uf.UFDrf
createCrossSection(Curve[], Expression, Expression, StockStyle) - Method in interface nxopen.routing.CrossSectionCollection
createCrossSectionParameters() - Method in interface nxopen.cae.ResultManager
Creates a cross-section parameter object.
createCrossSectionViewForResult(int, int, CrossSectionParameters) - Method in interface nxopen.cae.Post
Create a new cross-section view with specified result on a loaded result id.
createCrvCrvConstraint(UFMotion.CurveCurveConstraint) - Method in interface nxopen.uf.UFMotion
createCsdEvaluationSettingBuilder(CsdEvaluationSetting) - Method in interface nxopen.cae.responsesimulation.EvaluationSettingManager
Creates CSD evaluation setting object
License requirements: nx_response_anlys ("NX Response Analysis")
.
createCsdExcitationBuilder(CSDExcitation) - Method in interface nxopen.cae.responsesimulation.ExcitationCollection
Creates the builder object of
DDAMExcitation
License requirements: nx_response_anlys ("NX Response Analysis")
Created in NX5.0.0
Returns the datum CSYS creation
License requirements: None.
createCsys(double[], Tag) - Method in interface nxopen.uf.UFCsys
createCsysMappingMatrix(double[], double[]) - Method in interface nxopen.uf.UFTrns
CreateCsysMappingMatrixData() - Constructor for class nxopen.uf.UFTrns.CreateCsysMappingMatrixData
createCurvature(ICurve, Scalar, SmartObject.UpdateOption) - Method in interface nxopen.OffsetCollection
createCurvature(Point, ICurve, SmartObject.UpdateOption) - Method in interface nxopen.OffsetCollection
createCurvature(Face, Scalar, Scalar, boolean, Offset.OnFaceOption, Direction, SmartObject.UpdateOption) - Method in interface nxopen.OffsetCollection
Creates a
Offset on a
Face using two
Scalar s representing the u and v parameters with option of
direction on the face.
Creates a sectional
Offset on a
Face using two
Scalar s representing the u and v parameters and a
Scalar representing section angle measured with respect to
positive U parameter direction at u and v parameters of the face.
Creates a
Offset on a
Face using two
Scalar s representing the u and v parameters with option of
direction on the face.
Creates a sectional
Offset on a
Face using two
Scalar s representing the u and v parameters and a
Scalar representing section angle measured with respect to
positive U parameter direction at u and v parameters of the face.
Creates a
CurveContact
License requirements: mechanisms ("MECHANISMS")
Created in NX5.0.0
Creates a Curve Continuity Builder
License requirements: studio_analyze ("STUDIO ANALYZE")
.
createCurveCurvatureAnalysisBuilder(DisplayableObject) - Method in interface nxopen.geometricanalysis.AnalysisObjectCollection
Creates a curve curvature analysis builder
License requirements: gateway ("UG GATEWAY")
.
createCurveExtract(Tag, UFSo.UpdateOption, Tag, int, int, Tag) - Method in interface nxopen.uf.UFSo
createCurveFromEdge(Tag) - Method in interface nxopen.uf.UFModlGeneral
createCurvelengthBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
Creates a Curvelength builder
License requirements: solid_modeling ("SOLIDS MODELING")
.
createCurveLengthDimensionBuilder(BaseArcLengthDimension) - Method in interface nxopen.annotations.DimensionCollection
createCurveMesh(UFModl.StringList, UFModl.StringList, UFModl.StringList, int, int, int, int, UFModl.FeatureSigns, double[], Tag[], int[]) - Method in interface nxopen.uf.UFModlFeatures
createCurveOnCurveBuilder(CurveOnCurve) - Method in interface nxopen.motion.CurveOnCurveCollection
Creates a
CurveOnCurveBuilder
License requirements: mechanisms ("MECHANISMS")
Created in NX6.0.0
Creates a Curve On Surface feature builder
License requirements: solid_modeling ("SOLIDS MODELING")
.
createCurveOption() - Method in interface nxopen.SketchEvaluator
Returns the option which allows automatic create of non-associative UG curves
for the sketch evaluation.
createCurves() - Method in interface nxopen.features.SilhouetteFlangeBuilder
Returns a value that indicates whether to create curves.
createCurvesForGouges() - Method in interface nxopen.cam.CutDepthChecker
Returns the indicator to create curves for the gouged motions
License requirements: None.
createCurvesFromPolygonFace(Part, CAEFace) - Method in interface nxopen.cae.CADModeling
CREATE curves from polygon face in part
License requirements: nx_masterfem ("Finite Element Modeling")
.
createCustomBracketBuilder(Feature) - Method in interface nxopen.features.ShipCollection
Creates a
CustomBracketBuilder
License requirements: nx_ship_concept ("Ship Concept")
Created in NX7.5.0
Create a custom menu.
createCustomSymbol(CustomSymbolData, Point3d, LeaderBundle) - Method in interface nxopen.annotations.CustomSymbolCollection
createCustomSymbolInstance(UFDrf.CustomSymbol) - Method in interface nxopen.uf.UFDrf
createCustomViewSettingsBuilder() - Method in interface nxopen.drawings.DraftingViewCollection
createCut(UFVariant, double[], double[]) - Method in interface nxopen.uf.UFDrpos
createCutcom(UFVariant, UFPath.Cutcom, String) - Method in interface nxopen.uf.UFPath
createCutCopyPasteBuilder() - Method in interface nxopen.drafting.DraftingApplicationManager
Creates the CutCopyPaste builder
License requirements: None.
createCutDepthChecker() - Method in interface nxopen.cam.CAMSetup
Creates a Cut Depth Checker.
createCutFaceBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
Creates a cut face builder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
.
createCutout2Builder(Cutout2) - Method in interface nxopen.features.ShipCollection
createCuttingSideFacesBuilder() - Method in interface nxopen.features.ShipCollection
Creates a
CuttingSideFacesBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
Created in NX8.0.0
Create an empty cut volume
License requirements: cam_base ("CAM BASE")
.
createCutWire(UFVariant, String) - Method in interface nxopen.uf.UFPath
createCyl1(UFModl.FeatureSigns, double[], String, String, double[]) - Method in interface nxopen.uf.UFModlFeatures
createCylinder(UFModl.FeatureSigns, Tag, double[], String, String, double[]) - Method in interface nxopen.uf.UFModlFeatures
createCylinderBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
Creates a
CylinderBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
Created in NX5.0.0
Creates a cylinder face method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createCylinderFaceMethod(CAEBody[], double, double, double, double) - Method in interface nxopen.cae.SmartSelectionManager
Creates a cylinder face method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createCylinderFaceMethod(CAEFace[], double, double, double, double) - Method in interface nxopen.cae.SmartSelectionManager
Creates a cylinder face method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createCylinderMillingBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
Creates a Cylinder Milling operation builder
License requirements: cam_base ("CAM BASE")
.
createCylindricalBushing(UFMotion.CylindricalBushing) - Method in interface nxopen.uf.UFMotion
createCylindricalCoordinateSystem(Point3d, Vector3d, Vector3d) - Method in interface nxopen.CoordinateSystemCollection
Creates a new cylindrical coordinate system
License requirements: None.
createCylindricalCoordinateSystem(Point3d, NXMatrix, boolean) - Method in interface nxopen.CoordinateSystemCollection
Creates a new cylindrical coordinate system
License requirements: None.
createCylindricalCoordinateSystem(Xform, SmartObject.UpdateOption) - Method in interface nxopen.CoordinateSystemCollection
Creates a CylindricalCoordinateSystem from a Xform and update option.
createCylindricalDim(UFDrf.Object, UFDrf.Object, UFDrf.Text, double[]) - Method in interface nxopen.uf.UFDrf
createCylindricalDimension(DimensionData, Point3d) - Method in interface nxopen.annotations.DimensionCollection
Creates a cylindrical dimension
License requirements: drafting ("DRAFTING")
.
createCylindricalJointBuilder(CylindricalJoint) - Method in interface nxopen.mechatronics.CylindricalJointCollection
createCylPocket(double[], double[], String, String, String, String, Tag) - Method in interface nxopen.uf.UFModlFeatures
CREATED - Static variable in class nxopen.issue.IssueManager.State
Created state
created - Variable in class nxopen.tooling.MWDefineRegionsBuilder.OrCreateEmptyRegionData
Return flag indicating if an empty region UDO is created
created - Variable in class nxopen.tooling.MWDesignGuideLinesBuilder.CreateGuideLineData
1 if a guide line has been created, or 0 if existing guide line is returned
createDamageEvaluationBuilder() - Method in interface nxopen.cae.DurabilityManager
Creates a builder for a durability damage evaluation.
createDamper() - Method in interface nxopen.motion.SpringBuilder
Returns the create damper toggle
License requirements: None.
createDamper(UFMotion.SpringDamper) - Method in interface nxopen.uf.UFMotion
createDamperBuilder(Damper) - Method in interface nxopen.motion.DamperCollection
Return
DamperBuilder object
License requirements: mechanisms ("MECHANISMS")
Created in NX6.0.0
Creates a builder for the laminate damping factor.
createDaoOptimizationSolutionResult(DAOSolution) - Method in interface nxopen.cae.ResultManager
Creates a solution result object given a
DAOSolution
It is user's responsibility to destroy the result object once done
using
ResultManager.deleteResult(nxopen.cae.Result) , in order to free up system resources
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX8.0.1
Returns the application where joint is created
License requirements: None.
createDataset(Tag, String) - Method in interface nxopen.uf.UFClear
createDataSetToggle() - Method in interface nxopen.features.shipdesign.ReadDataSetBuilder
Returns the property that if the toggle is on then the native file will be added to current work part as a data set
License requirements: None.
createDateItemBuilder() - Method in interface nxopen.DateBuilder
createDatum(DatumData, PmiData, Xform, Point3d, LeaderBundle) - Method in interface nxopen.annotations.GdtDatumCollection
Creates a PMI datum
License requirements: geometric_tol ("GDT")
.
createDatum(DatumData, Point3d, LeaderBundle) - Method in interface nxopen.annotations.GdtDatumCollection
Creates a drafting datum
License requirements: drafting ("DRAFTING")
.
createDatum() - Method in interface nxopen.tooling.GeneralInsertBuilder
Create datum on selected face
License requirements: None.
createDatumAxis() - Method in interface nxopen.formboard.FlipComponentBuilder
Creates datums axis at locations where selected formboard component
is connected to path.
createDatumAxisBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
Creates a Datum Axis feature builder
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
createDatumCsys(Tag, Tag, boolean) - Method in interface nxopen.uf.UFModlFeatures
createDatumCsysBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
Creates a Datum CSYS feature builder
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT")
.
createDatumCsysOffset(Tag, Tag, double[], double[], boolean) - Method in interface nxopen.uf.UFModlFeatures
createDatumPinBuilder(DatumPin) - Method in interface nxopen.weld.WeldManager
createDatumPlane() - Method in interface nxopen.display.DynamicSectionBuilder
Creates a datum plane from the active section plane.
createDatumPlaneBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
Creates a Datum Plane feature builder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT")
.
createDatumPlaneGridBuilder(DatumPlaneGrid) - Method in interface nxopen.display.GridCollection
createDatumPlaneGridBuilder(DatumPlane[]) - Method in interface nxopen.display.GridCollection
Creates a
DatumPlaneGridBuilder object
used to build datum plane grids based on the supplied datum plane list.
Returns the indication that the blank to be updated was created by insert method.
createDdamExcitationBuilder(DDAMExcitation) - Method in interface nxopen.cae.responsesimulation.ExcitationCollection
Creates the builder object of
DDAMExcitation
License requirements: nx_response_anlys ("NX Response Analysis")
Created in NX5.0.0
Creates a
DecalBuilder object with image referenced object if decal is null.
Creates a
DecksBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
Created in NX5.0.0
Create the default CSYS based on WCS
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder") OR resource_manager_nx ("Teamcenter Resource Manager")
.
createDefaultGeometry() - Method in interface nxopen.formboard.FormboardLayoutBuilder
Creates the initial set of formboard geometry using the current
default values stored in the builder.
createDefaultSheet(String, NXObject, int, int) - Method in interface nxopen.tooling.DesignTrimToolBuilder
Create a Moldwizard default trim surface, including CORE_TRIM_SHEET, CAVITY_TRIM_SHEET, CORE_MOLD_SURFACE, CAVITY_MOLD_SURFACE.
createDefaultSpine() - Method in interface nxopen.die.AddSurfBuilder
Creates a smoothed spine curve from the forming boundary using the spine radius value
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
createDefaultSpine() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
Creates a smoothed spine curve from the forming boundary using the spine radius value
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
createDefineCamBuilder() - Method in interface nxopen.tooling.ProgressiveDieManager
Creates Define Cam builder.
createDefineComponentAnchorPointBuilder() - Method in interface nxopen.layout2d.ComponentCollection
Creates a
DefineComponentAnchorPointBuilder that can define the Anchor Point location of a
2D Component
License requirements: nx_layout ("NX Layout")
Created in NX10.0.0
Creates a
DefineComponentBuilder that can create a fully defined 2D
Component with specified content, anchor point, name and reuse library destination folder.
Creates Define Lifter builder.
createDefineRunBuilder(Run) - Method in interface nxopen.routing.RouteManager
createDefineTitleBlockBuilder(TitleBlock) - Method in interface nxopen.annotations.TitleBlockCollection
createDeformablePart(UFAssem.DeformData) - Method in interface nxopen.uf.UFAssem
createDeformationParameters() - Method in interface nxopen.cae.ResultManager
Creates a deformation parameter object.
createDeleteBodyBuilder(DeleteBody) - Method in interface nxopen.features.FeatureCollection
Creates a
DeleteBodyBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
Created in NX8.5.0
Creates electrode delete component builder
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
createDeleteCurveBuilder(DeleteCurve) - Method in interface nxopen.features.SynchronousCurveCollection
Creates a
DeleteCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
Created in NX9.0.0
Creates a
DeleteEdgeBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX8.0.0
Creates a builder for element delete command
License requirements: nx_masterfem ("Finite Element Modeling")
.
createDeleteFaceBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
Creates a delete face builder, don't use it until nx502
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
.
createDeleteFontsBuilder(NXObject[]) - Method in interface nxopen.routing.RouteManager
createDeleteGapsBuilder(NXObject[]) - Method in interface nxopen.routing.RouteManager
createDeleteObjectsBuilder(NXObject[]) - Method in interface nxopen.routing.RouteManager
createDeletePolygonFaceBuilder() - Method in interface nxopen.cae.AbstractionManager
createDeleteSeamBuilder() - Method in interface nxopen.features.ShipCollection
Creates a
DeleteSeamBuilder
License requirements: nx_ship_basic ("Ship Basic Design")
Created in NX8.0.0
Create a Delta Move.
createDemoCylinderListItemBuilder() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
createDependencyCreatorBuilder() - Method in interface nxopen.mechatronics.MechatronicsManager
createDependentMeshBuilder(DependentMesh) - Method in interface nxopen.cae.MeshManager
Creates a dependent mesh builder
License requirements: nx_masterfem ("Finite Element Modeling")
.
createDependentVariable(Field, NameVariable, Unit) - Method in interface nxopen.fields.FieldManager
Create a dependent variable to be added to the field
License requirements: None.
createDesignElementBuilder(Part, DesignElementBuilder.OperationType) - Method in interface nxopen.CollaborativeContentManager
Creates a
DesignElementBuilder for creating or revising design elements
License requirements: nx_4gd_integration ("4th Generation Design")
Created in NX8.5.0
Creates the builder of
TBSDesignResponse
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
Created in NX8.0.0
Creates a
DesignRuleViolationViewer to display the given violations
in the Design Rule Violation Browser just like the Browse Violations command.
Runs all the registered Design Rules just like the Interactive Check command.
createDesignStudyAttributeBuilder() - Method in interface nxopen.optimization.DesignStudyCollection
Create builder for DesignStudyAttribute class
License requirements: None.
createDesignStudyBuilder() - Method in interface nxopen.optimization.DesignStudyCollection
Create builder for design study class
License requirements: None.
createDesignTrimToolBuilder() - Method in interface nxopen.tooling.DesignTrimToolCollection
Creates a DesignTrimTool builder
License requirements: None.
createDesignVariableBuilder(DAODesignVariable) - Method in interface nxopen.cae.optimization.DAOSolution
Creates the builder object of optimization solution design variable
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
createDesignVariableBuilder(DAODesignVariable) - Method in interface nxopen.cae.optimization.DAOSolutionCollection
createDesignVariableBuilder(TBSDesignVariable) - Method in interface nxopen.cae.optimization.TBSOptimizationManager
Creates the builder of
TBSDesignVariable
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
Created in NX8.0.0
Creates a builder for the Destination Collector Specification block.
createDetailViewBuilder(DetailView) - Method in interface nxopen.drawings.DraftingViewCollection
Creates a
DetailViewBuilder
License requirements: drafting ("DRAFTING")
Created in NX6.0.0
Creates a deviation checking object
License requirements: None.
createDeviationGaugeBuilder(DisplayableObject) - Method in interface nxopen.geometricanalysis.AnalysisObjectCollection
Creates a Deviation Gauge Builder
License requirements: solid_modeling ("SOLIDS MODELING")
.
createdHoleManufacturingNote() - Method in interface nxopen.tooling.HoleManufacturingNoteBuilder
Returns the created hole manufacturing note
License requirements: None.
createDiagnosticGroups() - Method in interface nxopen.cae.DurabilityEventSolverBuilder
Returns the create diagnostic groups.
createDiagnosticGroups() - Method in interface nxopen.cae.DurabilitySolverBuilder
Returns the create diagnostic groups.
createDialog(String) - Method in interface nxopen.UI
Creates a block dialog.
createDiameterDim(UFDrf.Object, UFDrf.Text, double[]) - Method in interface nxopen.uf.UFDrf
createDiameterDimension(DimensionData, Point3d) - Method in interface nxopen.annotations.DimensionCollection
Creates a diameter dimension
License requirements: drafting ("DRAFTING")
.
createDiameterDimension(Sketch.DimensionGeometry, Point3d, Expression) - Method in interface nxopen.Sketch
Creates a diameter dimension constraint
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
createDiameterDimension(Sketch.DimensionGeometry, Point3d, Expression, Sketch.DimensionOption) - Method in interface nxopen.Sketch
Creates a diameter dimension constraint.
createDieAttribute() - Method in interface nxopen.die.DieCollection
createDieBaseBuilder() - Method in interface nxopen.tooling.DieBaseCollection
Creates Die Base builder.
createDieBoolean() - Method in interface nxopen.die.DieCollection
createDieData(boolean) - Method in interface nxopen.die.Tip
Creates a copy of the product data in die position.
createDieDesDrawDieBuilder(nxopen.features.Feature) - Method in interface nxopen.tooling.AutoDieCollection
Creates a Die Design Draw Die builder.
createDieDesDrawPunchBuilder(nxopen.features.Feature) - Method in interface nxopen.tooling.AutoDieCollection
Creates a Die Design Draw Punch builder.
createDieDesignLowerBinderBuilder(nxopen.features.Feature) - Method in interface nxopen.tooling.AutoDieCollection
Creates a Die Design Lower Binder Builder
License requirements: ug_die_design ("Die Design")
.
createDieDesignSettingBuilder() - Method in interface nxopen.tooling.DieDesignSettingCollection
Creates die design setting builder.
createDieDesignTrimPostBuilder(nxopen.features.Feature) - Method in interface nxopen.tooling.AutoDieCollection
Creates a Die Design Trim Post Builder
License requirements: ug_die_design ("Die Design")
.
createDieDesPierceInsertBuilder() - Method in interface nxopen.tooling.AutoDieCollection
Creates a Die Design Pierce Insert builder
License requirements: None.
createDieDirection(nxopen.features.Feature) - Method in interface nxopen.die.DieCollection
createDieEngFormTaskBuilder(nxopen.features.Feature) - Method in interface nxopen.tooling.AutoDieCollection
Creates the form task feature builder.
createDieEngProcessUpdateManagerBuilder(nxopen.features.BodyFeature) - Method in interface nxopen.tooling.AutoDieCollection
Creates a Die Engineer Process Update Manager builder.
createDieEngStampingCarryoverBuilder(nxopen.features.BodyFeature) - Method in interface nxopen.tooling.AutoDieCollection
Creates the stamping carryover feature builder.
createDieEngStampingOutputBuilder(nxopen.features.BodyFeature) - Method in interface nxopen.tooling.AutoDieCollection
Creates a Stamping Output builder.
createDieEngTrimAngleCheckBuilder(AnalysisObject) - Method in interface nxopen.tooling.AutoDieCollection
Creates a Die Engineering Trim Angle Check builder
License requirements: die_engineering ("DIE ENGINEERING")
.
createDieEngTrimTaskBuilder(nxopen.features.BodyFeature) - Method in interface nxopen.tooling.AutoDieCollection
Creates a Die Engineer Trim Task Builder
License requirements: ug_die_design ("Die Design")
.
createDieLimits() - Method in interface nxopen.die.DieCollection
createDieLocation() - Method in interface nxopen.die.DieCollection
Creates a nxopen.die.DieLocationBuilder .
createDieLocations(nxopen.features.Feature, boolean, boolean, boolean, boolean, boolean, boolean, boolean) - Method in interface nxopen.die.DieCollection
createDiePlane(nxopen.features.Feature) - Method in interface nxopen.die.DieCollection
createDimension() - Method in interface nxopen.features.RPOBuilder
Creates a new empty RPODimension object
License requirements: None.
createDimension(Sketch.ConstraintType, Sketch.DimensionGeometry, Sketch.DimensionGeometry, Point3d, Expression) - Method in interface nxopen.Sketch
Creates a dimension between two geometric objects.
createDimension(Sketch.ConstraintType, Sketch.DimensionGeometry, Sketch.DimensionGeometry, Point3d, Expression, Sketch.DimensionOption) - Method in interface nxopen.Sketch
Creates a dimension between two geometric objects.
createDimension() - Method in interface nxopen.SketchOffsetBuilder
Returns the flag to create offset with a dimension or a dimensionless offset
License requirements: None.
createDimension(Tag, UFSket.ConType, UFSket.DimObject, UFSket.DimObject, double[]) - Method in interface nxopen.uf.UFSket
createDimensionalConstraint(Tag, UFSket.ConType, int, UFSket.DimObject[], double[]) - Method in interface nxopen.uf.UFSket
createDimensionBuilder(SketchDimensionalConstraint) - Method in interface nxopen.SketchCollection
Creates a
SketchDimensionBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
Created in NX5.0.0
Create a NXSM Dimple feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
createDirection(Point3d, Vector3d, SmartObject.UpdateOption) - Method in interface nxopen.DirectionCollection
Creates a nxopen.Direction without parameters.
createDirection(Line, Sense, SmartObject.UpdateOption) - Method in interface nxopen.DirectionCollection
Creates a
nxopen.Direction using a
Line .
Creates a
nxopen.Direction using a linear
Edge or
the axis of a conical
Edge .
Creates a nxopen.Direction using a nxopen.DatumAxis .
createDirection(ControlPoint, ControlPoint, SmartObject.UpdateOption) - Method in interface nxopen.DirectionCollection
createDirection(Point, Point, SmartObject.UpdateOption) - Method in interface nxopen.DirectionCollection
Creates a
nxopen.Direction using two
Point s.
Creates a
nxopen.Direction using the normal of a
Face or
the axis of a cylindrical
Face .
Creates a
nxopen.Direction using the normal of an
IBasePlane .
Creates a
nxopen.Direction using the normal of a
Sketch .
Creates a
nxopen.Direction using the axis of a
Conic .
Creates a
nxopen.Direction on a
ICurve using a
Scalar representing the t parameter.
Creates a Direction normal to the
Face using two
Scalar s representing the u and v parameters.
Creates a
nxopen.Direction on a
Face using two
Scalar s representing the u and v parameters with the option of
direction on face.
Creates a sectional
nxopen.Direction on a
Face
using two
Scalar s representing the u and v parameters and a
Scalar representing section angle measured with respect to
positive U parameter direction at u and v parameters of the face.
Creates a
nxopen.Direction on a
Face
at a
Point .
Creates a
nxopen.Direction using an extract
nxopen.Direction with optional
Xform .
Creates a nxopen.Direction based upon the parameters used
to define the point.
createDirection(Face, Point, Sense, SmartObject.UpdateOption) - Method in interface nxopen.DirectionCollection
Creates a
nxopen.Direction normal to a
Face at a
given
Point .
Creates a nxopen.Direction reverse to that of given
nxopen.Direction .
createDirection(nxopen.routing.Port, Sense, SmartObject.UpdateOption) - Method in interface nxopen.DirectionCollection
Creates a nxopen.Direction aligned to that of given
nxopen.routing.Port .
createDirection(Direction, Direction, SmartObject.UpdateOption) - Method in interface nxopen.DirectionCollection
Creates a nxopen.Direction using two nxopen.Direction s.
createDirection(Point, Expression, Sense, SmartObject.UpdateOption) - Method in interface nxopen.DirectionCollection
createDirection(IParameterizedSurface, Point, Sense, SmartObject.UpdateOption) - Method in interface nxopen.DirectionCollection
Creates a
nxopen.Direction using the normal of a non-planar
Face at a
Point
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR nx_masterfem ("Finite Element Modeling") OR geometric_tol ("GDT")
Created in NX6.0.0
Creates a
nxopen.Direction on a parent
ICurve
of a
Point .
Returns the option to control if a reference datum axis should be output with this feature.
createDirectory(String) - Method in interface nxopen.RemoteUtilities
Creates a directory.
createDirectUnbendBuilder() - Method in interface nxopen.tooling.DirectUnfoldCollection
Creates direct unbend builder
License requirements: None.
createDirectUnfoldBuilder() - Method in interface nxopen.tooling.DirectUnfoldCollection
Creates create direct unfold builder
License requirements: None.
createDirrAxisOfConic(Tag, UFSo.UpdateOption, Tag, boolean) - Method in interface nxopen.uf.UFSo
createDirrDoubles(Tag, UFSo.UpdateOption, double[]) - Method in interface nxopen.uf.UFSo
createDirrDoublesPnt(Tag, UFSo.UpdateOption, double[], double[]) - Method in interface nxopen.uf.UFSo
createDirrExtract(Tag, UFSo.UpdateOption, Tag, Tag) - Method in interface nxopen.uf.UFSo
createDirrLine(Tag, UFSo.UpdateOption, Tag, boolean) - Method in interface nxopen.uf.UFSo
createDirrNormalToSurfacePoint(Tag, UFSo.UpdateOption, Tag, Tag, boolean) - Method in interface nxopen.uf.UFSo
createDirrOnCurve(Tag, UFSo.UpdateOption, Tag, Tag, UFSo.DirrOnCurveOption, boolean) - Method in interface nxopen.uf.UFSo
createDirrOnSurf(Tag, UFSo.UpdateOption, UFSo.DirrOnSurfData) - Method in interface nxopen.uf.UFSo
createDirrPlane(Tag, UFSo.UpdateOption, Tag, boolean) - Method in interface nxopen.uf.UFSo
createDirrSurfaceAxis(Tag, UFSo.UpdateOption, Tag, boolean) - Method in interface nxopen.uf.UFSo
createDirrTwoDirs(Tag, UFSo.UpdateOption, Tag[]) - Method in interface nxopen.uf.UFSo
createDirrTwoPoints(Tag, UFSo.UpdateOption, Tag[]) - Method in interface nxopen.uf.UFSo
createDisplayChangerBuilder(DisplayChanger) - Method in interface nxopen.mechatronics.DisplayChangerCollection
createDisplayPropertiesBuilder(Field[]) - Method in interface nxopen.fields.FieldManager
createDisplaySolidBuilder() - Method in interface nxopen.features.ShipCollection
createDistance(Tag, Tag, Tag, Tag) - Method in interface nxopen.uf.UFGexp
createDistance1Dimension() - Method in interface nxopen.SketchChamferBuilder
Returns the flag to indicate whether to create a dimension for
SketchChamferBuilder.distance1()
License requirements: drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
Created in NX7.5.0
Returns the flag to indicate whether to create a dimension for
SketchChamferBuilder.distance2()
License requirements: drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
Created in NX7.5.0
Creates the builder object of
DistributedLoadExcitation
License requirements: nx_response_anlys ("NX Response Analysis")
Created in NX5.0.0
Creates a
DivideCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX5.0.0
Creates a Divideface builder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
.
createDivisions() - Method in interface nxopen.routing.DivisionsBuilder
Creates two new divisions by splitting the parent division.
createDivisionsBuilder(NXObject, boolean) - Method in interface nxopen.routing.RouteManager
Creates a Divisions builder.
createDofset(String, FENode[], boolean[], boolean[], boolean[], boolean[], boolean[], boolean[]) - Method in interface nxopen.cae.CaeDOFSetCollection
Create a DOFSet
A true for a dof logical entry would mean that the dof is included for that corresponding node.
createDolReportFile(String) - Method in interface nxopen.uf.UFDieeng
createdOrdinateOrigin() - Method in interface nxopen.tooling.AutoDimensionBuilder
Returns the created ordinate origin tag
License requirements: None.
createDoubleAttributeListEntry(boolean, boolean, boolean, String, int, int, String, double) - Method in interface nxopen.weld.CharacteristicsSelectionBuilder
createDoubleAttributeListEntry(boolean, boolean, boolean, boolean, String, int, int, String, double) - Method in interface nxopen.weld.CharacteristicsSelectionBuilder
Create a double attribute list entry and add it to the list.
createDoveTailSlot(double[], double[], double[], String, String, String, String, Tag, Tag, Tag) - Method in interface nxopen.uf.UFModl
createDpmcvDriveCurve(Section) - Method in interface nxopen.cam.DmCurveBuilder
Create a Drive Curve
License requirements: cam_base ("CAM BASE")
.
createDpmitpBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
Creates an itp builder
License requirements: cam_base ("CAM BASE")
.
createDraftAnalysisBuilder(DisplayableObject) - Method in interface nxopen.geometricanalysis.AnalysisObjectCollection
Creates a draft analysis builder
License requirements: studio_analyze ("STUDIO ANALYZE")
.
createDraftBodyBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
Creates a
DraftBodyBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
Created in NX5.0.0
Creates a draft builder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.
createDraftingComponent() - Method in interface nxopen.drawings.GeneralWorkFlowBuilder
Returns the flag indicating whether to creates a drafting component when creating a view of the master model part
License requirements: None.
createDraftingCustomSymbolBuilder(CustomSymbol) - Method in interface nxopen.annotations.CustomSymbolCollection
Creates the Drafting Symbol placement builder
License requirements: None.
createDraftingDatumFeatureSymbolBuilder(DraftingDatum) - Method in interface nxopen.annotations.GdtDatumCollection
createDraftingDatumTargetBuilder(DraftingDatumTarget) - Method in interface nxopen.annotations.AnnotationManager
createDraftingFeatureControlFrameBuilder(Gdt) - Method in interface nxopen.annotations.AnnotationManager
createDraftingNoteBuilder(SimpleDraftingAid) - Method in interface nxopen.annotations.AnnotationManager
createDraftingSplineBuilder(Spline) - Method in interface nxopen.features.FeatureCollection
Creates a Studio Spline builder for drafting
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.
createDraftingSurfaceFinishBuilder(DraftingSurfaceFinish) - Method in interface nxopen.annotations.DraftingSurfaceFinishCollection
If null create a new Drafting Surface Finish, otherwise edit existing Drafting Surface Annotatation
License requirements: None.
createDraftPointData(Point, String) - Method in interface nxopen.DraftPointDataCollection
Creates a DraftPointData object.
createDrapingDataBuilder() - Method in interface nxopen.cae.LaminatePly
createDrapingExtensionBuilder() - Method in interface nxopen.cae.LaminatePly
createDrawBeadBuilder(DrawBead) - Method in interface nxopen.die.DieCollection
createDrawBeadSegment() - Method in interface nxopen.die.DrawBeadBuilder
createDrawing(String, String) - Method in interface nxopen.tooling.AssemblyDrawingBuilder
Create drawing
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
createDrawing(String, String, String, String) - Method in interface nxopen.tooling.CompDrawingBuilder
createDrawingAnnotationBuilder() - Method in interface nxopen.features.ShipCollection
Creates a nxopen.features.shipdesign.DrawingAnnotationBuilder
License requirements: nx_ship_drafting ("Ship Drafting")
Created in NX10.0.0
createDrawingCompareSettingsBuilder() - Method in interface nxopen.DrawingCompareManager
createDrawingCreationWizardBuilder(boolean) - Method in interface nxopen.drafting.AutomationManager
createDrawingCreationWizardBuilderFromRule(String) - Method in interface nxopen.drafting.AutomationManager
createDrawingEditSectionLineSettingsBuilder(SectionLine[]) - Method in interface nxopen.drafting.SettingsManager
Creates a
EditSectionLineSettingsBuilder
For multiple object settings, first create primary settings builder by passing all
selected 'n' objects.Then create 'n-1' secondary builders by passing single selected
object starting from second selected object.
Creates a
EditViewLabelSettingsBuilder
For multiple object settings, first create primary settings builder by passing all
selected 'n' objects.Then create 'n-1' secondary builders by passing single selected
object starting from second selected object.
Creates a
EditViewSettingsBuilder
For multiple object settings, first create primary settings builder by passing all
selected 'n' objects.Then create 'n-1' secondary builders by passing single selected
object starting from second selected object.
Creates the DrawingRegion builder
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
createDrawingSheetNameBuilder() - Method in interface nxopen.tooling.ToolingDrawingCollection
Creates drawing sheet name builder
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
createDrawingViewBuilder(DrawingView) - Method in interface nxopen.drawings.DraftingViewCollection
Creates a DrawingViewBuilder
License requirements: drafting ("DRAFTING")
.
createDrawnCutoutFeatureBuilder(nxopen.features.Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
Create a NXSM Drawn Cutout feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
createDrf(UFGdt.DrfData) - Method in interface nxopen.uf.UFGdt
createDuctReinforcementBuilder(DuctReinforcement) - Method in interface nxopen.routing.RouteManager
Creates an HVAC Duct Reinforcement Builder.
createDuctSizeCalculatorBuilder(NXObject[]) - Method in interface nxopen.routing.RouteManager
Creates a Duct size calculator builder.
createDumbInflectionPoints() - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder
Create inflection points
License requirements: None.
createDumbPeakPoints() - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder
Create peak points
License requirements: None.
createDuplicateElementsCheckBuilder() - Method in interface nxopen.cae.ModelCheckManager
Provides access for creating duplicate elements builder in a cae part.
createDuplicateNodesCheckBuilder() - Method in interface nxopen.cae.ModelCheckManager
Provides access for creating duplicate nodes builder in a cae part.
createDurabilityEvaluateFatigueHistoryBuilder(DurabilityEvent) - Method in interface nxopen.cae.DurabilityManager
Creates a builder for Durability Evaluate Fatigue History.
createDurabilityEventResult(DurabilityEvent) - Method in interface nxopen.cae.ResultManager
Creates a solution result object given a
DurabilityEvent
It is user's responsibility to destroy the result object once done
using
ResultManager.deleteResult(nxopen.cae.Result) , in order to free up system resources
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX6.0.2
Creates a builder for Durability Results Report.
createDursolNx(String, Tag) - Method in interface nxopen.uf.UFSf
createDvToMvMappingBuilder(Feature) - Method in interface nxopen.features.ShipCollection
Creates a
DvToMvMappingBuilder
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
Created in NX8.5.0
Create the DxfdwgCreator
License requirements: None.
createDxfdwgImporter() - Method in interface nxopen.DexManager
Create the DxfdwgImporter
License requirements: None.
createDynamicCurbBuilder(Feature) - Method in interface nxopen.features.AutomotiveCollection
createDynamicCurbBuilder(DynamicCurb) - Method in interface nxopen.features.VehicleDesignCollection
Creates a
DynamicCurbBuilder
License requirements: nx_general_packaging ("NX General Packaging")
Created in NX9.0.0
Create or modify a dynamic rule.
createDynamicRule(String, String, String, String, String, String) - Method in interface nxopen.RuleManager
Create or modify a dynamic rule.
createDynamicRule(String, String, String, String, String) - Method in interface nxopen.RuleManager
Create or modify a dynamic rule.
createDynamicSectionBuilder(boolean) - Method in interface nxopen.BasePart
createDynamicSimBuilder(LaminateDynamicSim) - Method in interface nxopen.cae.LaminateDynamicSimCollection
Creates a builder for the laminate dynamic sim.
createEasyPatternBuilder(nxopen.features.Feature) - Method in interface nxopen.weld.WeldManager
createECADExportBuilder() - Method in interface nxopen.mechatronics.PhysicsManager
Creates a nxopen.mechatronics.ECADExportBuilder object.
createECADImportBuilder() - Method in interface nxopen.mechatronics.PhysicsManager
Creates a nxopen.mechatronics.ECADImportBuilder object.
createEdgeBlend(UFModl.EdgeBlendData) - Method in interface nxopen.uf.UFModlFeatures
createEdgeBlendBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
Creates a Edge Blend feature builder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.
createEdgeBlendMult(UFModl.EdgeBlendMultData) - Method in interface nxopen.uf.UFModlFeatures
createEdgeCutBuilder(EdgeCut) - Method in interface nxopen.features.ShipCollection
Creates a
EdgeCutBuilder
License requirements: nx_ship_detail ("Ship Detail Design")
Created in NX8.5.0
Creates an edge path method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createEdgePrepBuilder(EdgePrep) - Method in interface nxopen.weld.WeldManager
createEdgePrepValuesBuilder() - Method in interface nxopen.weld.WeldManager
createEdgeReinforcementBuilder(EdgeReinforcement) - Method in interface nxopen.features.ShipCollection
createEdgeRipFeatureBuilder(nxopen.features.Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
Create a NXSM Edge Rip feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
createEdgeSticherBuilder() - Method in interface nxopen.cae.FemPart
Creates a
EdgeSticherBuilder
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX6.0.0
Creates a
EdgeSymmetryBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
Created in NX7.0.0
Creates an Edit Bend Angle builder.
createEditBendBuilder(nxopen.features.Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
Creates a
EditBendBuilder
License requirements: nx_sheet_metal ("NX Sheet Metal")
Created in NX7.5.0
Creates a Features.ShipDesign.EditContextAttributesBuilder.
createEditCornerBuilder() - Method in interface nxopen.features.sheetmetal.SheetmetalManager
Creates a
EditCornerBuilder
License requirements: nx_sheet_metal ("NX Sheet Metal")
Created in NX7.5.0
Creates a
EditCrossSectionBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
Created in NX8.0.0
Creates a
EditDimensionBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
Created in NX6.0.0
Creates a
EditLeaderBuilder
License requirements: drafting ("DRAFTING")
Created in NX6.0.1
Returns the create and edit method.
createEditObjectDisplayBuilder(MarkupObject[]) - Method in interface nxopen.markup.MarkupFileCollection
Creates a nxopen.Markup.EditObjectDisplayBuilder
License requirements: None.
createEditPlacePartBuilder(Component) - Method in interface nxopen.routing.RouteManager
Creates a Routing.EditPlacePartBuilder that is used to edit the location of a previously placed
routing part in an assembly.
createEditStockBuilder() - Method in interface nxopen.features.ShipCollection
createEditTitleBlockBuilder(TitleBlock[]) - Method in interface nxopen.annotations.TitleBlockCollection
createEditWeldingBuilder() - Method in interface nxopen.features.ShipCollection
createEffectivityAttributePropertiesBuilder(BasePart, NXObject[]) - Method in interface nxopen.pdm.ConfigurationManager
createEffectivityConditionBuilder(CollaborativeDesign, String) - Method in interface nxopen.BasePart
createEffectivityConditionBuilder(CollaborativeDesign, String, String) - Method in interface nxopen.BasePart
createEjectorPostProcessingBuilder() - Method in interface nxopen.tooling.EjectorPostProcessingCollection
Creates a EjectorPostProcessing builder
License requirements: None.
createEjectorTableBuilder() - Method in interface nxopen.tooling.MoldwizardManager
Creates Ejector Pin Table builder.
createElbowSnapSettings() - Method in interface nxopen.routing.RouteManager
Creates a snap elbow settings object, this object is only useful for
LinearPathBuilder object.
Create builder for ElectricalPart class
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
createElectrodeCopyBuilder() - Method in interface nxopen.tooling.ElectrodeCopyCollection
Creates electrode copy builder
License requirements: None.
createElemEdgePathMethod(FEElemEdge, FENode) - Method in interface nxopen.cae.SmartSelectionManager
createElemEdgePathMethod(FEElemEdge, FENode, boolean, boolean, boolean, double, boolean, double) - Method in interface nxopen.cae.SmartSelectionManager
Creates an elem edge path method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createElementalFunctionEvaluationSettingBuilder(ElementalFunctionEvaluationSetting) - Method in interface nxopen.cae.responsesimulation.EvaluationSettingManager
Creates elemental function evaluation setting object
License requirements: nx_response_anlys ("NX Response Analysis")
.
createElementConnectivityBuilder() - Method in interface nxopen.cae.NodeElementManager
Creates a builder for element connectivity command
License requirements: nx_masterfem ("Finite Element Modeling")
.
createElementCreateBuilder() - Method in interface nxopen.cae.NodeElementManager
Creates a builder for element create command
License requirements: nx_masterfem ("Finite Element Modeling")
.
createElementEdgeCheckBuilder() - Method in interface nxopen.cae.ModelCheckManager
Provides access for creating Model Check builders in a cae part
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
createElementExtractBuilder() - Method in interface nxopen.cae.NodeElementManager
Creates a builder for Element Extract.
createElementExtrudeBuilder() - Method in interface nxopen.cae.NodeElementManager
Creates a builder for element extrude command
License requirements: nx_masterfem ("Finite Element Modeling")
.
createElementMaterialOrientationCheckBuilder() - Method in interface nxopen.cae.ModelCheckManager
Provides access for creating element material orientation builder in a cae part.
createElementModifyLabelBuilder() - Method in interface nxopen.cae.NodeElementManager
Creates a builder for element modify label command
License requirements: nx_masterfem ("Finite Element Modeling")
.
createElementModifyOrderBuilder() - Method in interface nxopen.cae.NodeElementManager
Creates a builder for element modify order command
License requirements: nx_masterfem ("Finite Element Modeling")
.
createElementModifyTypeBuilder() - Method in interface nxopen.cae.NodeElementManager
Creates a builder for element modify type command
License requirements: nx_masterfem ("Finite Element Modeling")
.
createElementProjectBuilder() - Method in interface nxopen.cae.NodeElementManager
Creates a builder for element project command
License requirements: nx_masterfem ("Finite Element Modeling")
.
createElementQualityCheckBuilder() - Method in interface nxopen.cae.ModelCheckManager
Provides access for creating element quality Check builders in a cae part
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
createElementReflectBuilder() - Method in interface nxopen.cae.NodeElementManager
Creates a builder for element reflect command
License requirements: nx_masterfem ("Finite Element Modeling")
.
createElementRevolveBuilder() - Method in interface nxopen.cae.NodeElementManager
Creates a builder for element revolve command
License requirements: nx_masterfem ("Finite Element Modeling")
.
createElementSplitBuilder() - Method in interface nxopen.cae.NodeElementManager
Creates a builder for element split command
License requirements: nx_masterfem ("Finite Element Modeling")
.
createElementTranslateBuilder() - Method in interface nxopen.cae.NodeElementManager
Creates a builder for element translate command
License requirements: nx_masterfem ("Finite Element Modeling")
.
createElementTypeBuilder() - Method in interface nxopen.cae.NodeElementManager
Creates a builder for the Element Type Specification block.
createEllipse(Point3d, double, double, double, double, double, NXMatrix) - Method in interface nxopen.CurveCollection
createEllipse(Point3d, Vector3d, Vector3d, double, double, double, double) - Method in interface nxopen.CurveCollection
createEllipse(Point2d, double, double) - Method in interface nxopen.markup.MarkupFileObjectCollection
Creates a nxopen.Markup.Ellipse
License requirements: None.
createEmbedded() - Method in interface nxopen.MeasureAngle
createEmbedded(MeasureBodies.ActiveValue) - Method in interface nxopen.MeasureBodies
createEmbedded() - Method in interface nxopen.MeasureDistance
createEmbedded(MeasureFaces.ActiveValue) - Method in interface nxopen.MeasureFaces
createEmbedded() - Method in interface nxopen.MeasureLength
createEmbeddedObject() - Method in interface nxopen.MeasureAngle
Creates an embedded measurement.
createEmbeddedObject(MeasureBodies.ActiveValue) - Method in interface nxopen.MeasureBodies
Creates an embedded measurement.
createEmbeddedObject() - Method in interface nxopen.MeasureDistance
Creates an embedded measurement.
createEmbeddedObject(MeasureFaces.ActiveValue) - Method in interface nxopen.MeasureFaces
Creates an embedded measurement.
createEmbeddedObject() - Method in interface nxopen.MeasureLength
Creates an embedded measurement.
createEmbeddedObject() - Method in interface nxopen.MeasurePolarAngle
Creates an embedded measurement.
createEmbeddedObject() - Method in interface nxopen.MeasurePolarArea
Creates an embedded measurement.
createEmbeddedObject() - Method in interface nxopen.MeasurePolarRadius
Creates an embedded measurement.
CreateEmbeddedObjectData() - Constructor for class nxopen.MeasureAngle.CreateEmbeddedObjectData
CreateEmbeddedObjectData() - Constructor for class nxopen.MeasureBodies.CreateEmbeddedObjectData
CreateEmbeddedObjectData() - Constructor for class nxopen.MeasureDistance.CreateEmbeddedObjectData
CreateEmbeddedObjectData() - Constructor for class nxopen.MeasureFaces.CreateEmbeddedObjectData
CreateEmbeddedObjectData() - Constructor for class nxopen.MeasureLength.CreateEmbeddedObjectData
CreateEmbeddedObjectData() - Constructor for class nxopen.MeasurePolarAngle.CreateEmbeddedObjectData
CreateEmbeddedObjectData() - Constructor for class nxopen.MeasurePolarArea.CreateEmbeddedObjectData
CreateEmbeddedObjectData() - Constructor for class nxopen.MeasurePolarRadius.CreateEmbeddedObjectData
createEmbossBodyBuilder(EmbossBody) - Method in interface nxopen.features.FeatureCollection
Creates a
EmbossBodyBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX8.5.0
Creates an Emboss builder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.
createEmptyBlendSetbackBuilder() - Method in interface nxopen.Part
createEmptyBoundaryDefinitionBuilder() - Method in interface nxopen.Part
Creates boundary definition builder object
License requirements: studio_free_form ("STUDIO FREE FORM")
.
createEmptyCageSectionBuilder() - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
Creates an empty cage section builder object.
createEmptyDatumReferenceBuilder() - Method in interface nxopen.annotations.AnnotationManager
Creates a new empty datum reference builder
License requirements: None.
createEmptyExpressionCollectorSet() - Method in interface nxopen.Part
Creates an empty ExpressionCollectorSet item
License requirements: None.
createEmptyExpressionSectionSet() - Method in interface nxopen.Part
Creates an empty ExpressionSectionSet item
License requirements: None.
createEmptyFaceSet() - Method in interface nxopen.geometricutilities.FaceSetOffsetCollection
Creates an empty offset face set, with all parameters set to 0 or null
License requirements: solid_modeling ("SOLIDS MODELING")
.
createEmptyGeometrySet() - Method in interface nxopen.cam.SurfaceDriveGeometry
Create an empty geometry set
License requirements: cam_base ("CAM BASE")
.
createEmptyMatch() - Method in interface nxopen.geometricutilities.ReplAsstBuilder
This is the default creator for a parent equivalency map.
createEmptyPartFamilyInstanceSelectionCriteria(Template) - Method in interface nxopen.assemblies.Component
createEmptyRegionPoint() - Method in interface nxopen.Part
Creates an empty item that contains a point and its corresponding body context for a region
License requirements: None.
createEmptyTransitionCurveBuilder() - Method in interface nxopen.Part
createEmptyTwoExpressionsCollectorSet() - Method in interface nxopen.Part
Creates an empty TwoExpressionCollectorSet item that contains
a
ScCollector collection
and two corresponding expressions
License requirements: None.
Creates an empty TwoExpressionSectionSet item that contains
a
Section section
and two corresponding expressions
License requirements: None.
Creates a
EndCutBuilder
License requirements: nx_ship_detail ("Ship Detail Design")
Created in NX8.0.0
Returns the indication if the sweep should be created from the edge location to the start location.
createEngravingBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
Creates a planar milling text operation builder
License requirements: cam_base ("CAM BASE")
.
createEnlarge(Tag, int, String[], double) - Method in interface nxopen.uf.UFModlFeatures
createEnlargeBuilder(Enlarge) - Method in interface nxopen.features.FeatureCollection
Creates an Enlarge builder
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
createEnlargeSurfaceBuilder() - Method in interface nxopen.tooling.EnlargeSurfaceCollection
Creates a Enlarge Surface builder
License requirements: None.
createEnterpriseIdentificationBuilder(EnterpriseIdentification) - Method in interface nxopen.annotations.PmiAttributeCollection
createEntryPoint() - Method in interface nxopen.cam.InspectionPathBuilder
Returns a flag to indicate if an entry point is required
License requirements: None.
createEqualLengthConstraint(Sketch.ConstraintGeometry, Sketch.ConstraintGeometry) - Method in interface nxopen.Sketch
Creates an equal length constraint.
createEqualRadiusConstraint(Sketch.ConstraintGeometry, Sketch.ConstraintGeometry) - Method in interface nxopen.Sketch
Creates an equal radius constraint.
createEventBuilder(RSEvent) - Method in interface nxopen.cae.responsesimulation.RSEventCollection
Creates a event buider
License requirements: nx_response_anlys ("NX Response Analysis")
.
createEventfatiguesettingsBuilder(DurabilityFatigue) - Method in interface nxopen.cae.DurabilityFatigueCollection
Creates the builder object of durability event fatigue settings.
createEventoverridesBuilder(DurabilitySolveOptions) - Method in interface nxopen.cae.DurabilitySolveOptionsCollection
Creates the builder object of durability event overrides.
createEventSolverBuilder(DurabilityEvent) - Method in interface nxopen.cae.DurabilityManager
Creates a builder for a durability event solver.
createEventstrengthsettingsBuilder(DurabilityStrength) - Method in interface nxopen.cae.DurabilityStrengthCollection
Creates the builder object of durability event strength settings.
createEwdraftingBuilder() - Method in interface nxopen.tooling.ElectrodeDesignCollection
Creates Electrode Drafting builder
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
createEwmultiPositionBuilder() - Method in interface nxopen.tooling.EWMultiPositionCollection
Creates EW multi-position builder
License requirements: None.
createExamineGeometryObject() - Method in interface nxopen.geometricanalysis.AnalysisManager
Creates an examine geometry object
License requirements: None.
createExamineSteelFeatureBuilder() - Method in interface nxopen.features.ShipCollection
Creates a nxopen.features.shipdesign.ExamineSteelFeatureBuilder .
createExcessMaterialBuilder(ExcessMaterial) - Method in interface nxopen.features.ShipCollection
Creates a
ExcessMaterialBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
Created in NX7.5.0
Creates a exciter configuration dialog builder
License requirements: nx_correl_base ("FE Correlation")
.
createExclusionZoneBuilder(AdaptivityExclusionZone) - Method in interface nxopen.cae.AdaptivityExclusionZoneCollection
Creates the builder object of adaptivity exclusion zone.
createExclusiveOrDofset(String, CaeDOFSet[]) - Method in interface nxopen.cae.CaeDOFSetCollection
Create a XOR of DOFSets
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
createExitPoint() - Method in interface nxopen.cam.InspectionPathBuilder
Returns a flag to indicate if an exit point is required
License requirements: None.
createExp(String) - Method in interface nxopen.uf.UFModlGeneral
createExpansionDrawingBuilder(ExpansionDrawing) - Method in interface nxopen.features.ShipCollection
createExplicitOrderBuilder() - Method in interface nxopen.annotations.PmiManager
createExplicitSearchTerm(SearchTerm.SearchTermLogicType, SearchResultElement) - Method in interface nxopen.assemblies.SubsetRecipe
Creates a
ExplicitSearchTerm and
adds it to the recipe at the end of the list of search terms.
Creates a nxopen.tooling.SIZERExportBuilder
License requirements: mechanisms ("MECHANISMS")
Created in NX7.5.0
createExportControlBuilder(ExportControl) - Method in interface nxopen.annotations.PmiAttributeCollection
createExportData() - Method in interface nxopen.fields.FieldManager
Creates a Fields.ExportData
License requirements: None.
createExportFlatPatternBuilder() - Method in interface nxopen.features.sheetmetal.SheetmetalManager
Creates a
ExportFlatPatternBuilder
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
Created in NX8.0.0
Creates a pre-test export Unv builder
License requirements: nx_correl_base ("FE Correlation")
.
createExportWeldBuilder() - Method in interface nxopen.weld.WeldManager
createExportWeldJointBuilder() - Method in interface nxopen.weld.WeldManager
createExpression(String, String) - Method in interface nxopen.ExpressionCollection
Creates an expression of the specified type.
createExpressionCollectorSet(ScCollector, String, String, int) - Method in interface nxopen.Part
Creates an ExpressionCollectorSet item that contains a
ScCollector collection
and a corresponding expression
License requirements: None.
Creates an ExpressionSectionSet item that contains a
Section collection
and a corresponding expression
License requirements: None.
Creates a
Section object containing the extended constraint curve.
Creates a nxopen.features.ExtendSheetBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX9.0.0
createExtensionBuilder(Extension) - Method in interface nxopen.features.FeatureCollection
Creates a
ExtensionBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING")
Created in NX8.0.0
Creates a
ExtractFaceBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT")
Created in NX5.0.0
Creates a extract Xform based on object.
CreateExtractXformData() - Constructor for class nxopen.XformCollection.CreateExtractXformData
createExtrudeBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
Creates a Extrude builder
License requirements: solid_modeling ("SOLIDS MODELING")
.
createExtruded(Tag[], String, String[], double[], double[], UFModl.FeatureSigns) - Method in interface nxopen.uf.UFModl
createExtruded1(Tag[], String, String[], double[], double[], UFModl.FeatureSigns, Tag) - Method in interface nxopen.uf.UFModl
createExtruded2(Tag[], String, String[], double[], double[], UFModl.FeatureSigns) - Method in interface nxopen.uf.UFModl
createExtrudedPath(Tag[], Tag[], double[], double[], UFModl.FeatureSigns) - Method in interface nxopen.uf.UFModl
createExtrudedPath1(Tag[], Tag[], double[], double[], UFModl.FeatureSigns, Tag) - Method in interface nxopen.uf.UFModl
createExtrudeFacetBodyBuilder() - Method in interface nxopen.facet.FacetedBodyCollection
Creates a
ExtrudeFacetBodyBuilder
License requirements: studio_free_form ("STUDIO FREE FORM") OR die_engineering ("DIE ENGINEERING")
Created in NX9.0.0
Creates a
ExtrudeProfileBuilder
License requirements: studio_free_form ("STUDIO FREE FORM") OR die_engineering ("DIE ENGINEERING")
Created in NX9.0.0
Returns the option to turn on or off the preview for Extrude or Swept parting surface
License requirements: None.
createExtrudeTrimOpts(Tag[], int, UFModl.SweepTrimObject, UFModl.SweepTrimOpts, String, String[], String[], double[], boolean, boolean, double[], UFModl.FeatureSigns) - Method in interface nxopen.uf.UFModl
createExtrudeTrimOpts1(Tag[], int, UFModl.SweepTrimObject, UFModl.SweepTrimOpts, String, String[], String[], double[], boolean, boolean, double[], UFModl.FeatureSigns, Tag) - Method in interface nxopen.uf.UFModl
CreateExtrudeTrimOpts1Data() - Constructor for class nxopen.uf.UFModl.CreateExtrudeTrimOpts1Data
CreateExtrudeTrimOptsData() - Constructor for class nxopen.uf.UFModl.CreateExtrudeTrimOptsData
createExtrusion(Tag[], int, UFModl.SweepTrimObject, String, String[], String[], double[], boolean, boolean, double[], UFModl.FeatureSigns) - Method in interface nxopen.uf.UFModl
createExtrusion1(Tag[], int, UFModl.SweepTrimObject, String, String[], String[], double[], boolean, boolean, double[], UFModl.FeatureSigns, Tag) - Method in interface nxopen.uf.UFModl
CreateExtrusion1Data() - Constructor for class nxopen.uf.UFModl.CreateExtrusion1Data
createExtrusion2(Tag[], int, UFModl.SweepTrimObject, String, String[], String[], double[], boolean, boolean, double[], UFModl.FeatureSigns) - Method in interface nxopen.uf.UFModl
CreateExtrusion2Data() - Constructor for class nxopen.uf.UFModl.CreateExtrusion2Data
CreateExtrusionData() - Constructor for class nxopen.uf.UFModl.CreateExtrusionData
createExtrusionDefault(Tag[], int, UFModl.SweepTrimObject, UFModl.SweepTrimOpts, String, String[], String[], double[], boolean, boolean, Tag, boolean, UFModl.FeatureSigns) - Method in interface nxopen.uf.UFModl
createExtrusionDefault1(Tag[], int, UFModl.SweepTrimObject, UFModl.SweepTrimOpts, String, String[], String[], double[], boolean, boolean, Tag, boolean, UFModl.FeatureSigns, Tag) - Method in interface nxopen.uf.UFModl
CreateExtrusionDefault1Data() - Constructor for class nxopen.uf.UFModl.CreateExtrusionDefault1Data
CreateExtrusionDefaultData() - Constructor for class nxopen.uf.UFModl.CreateExtrusionDefaultData
createExtrusionDir(Tag[], int, UFModl.SweepTrimObject, UFModl.SweepTrimOpts, String, String[], String[], double[], boolean, boolean, Tag, UFModl.FeatureSigns) - Method in interface nxopen.uf.UFModl
CreateExtrusionDirData() - Constructor for class nxopen.uf.UFModl.CreateExtrusionDirData
createExtrusionPath(Tag[], int, Tag[], int, UFModl.SweepTrimObject, String[], double[], boolean, boolean, UFModl.FeatureSigns) - Method in interface nxopen.uf.UFModl
createExtrusionPath1(Tag[], int, Tag[], int, UFModl.SweepTrimObject, String[], double[], boolean, boolean, UFModl.FeatureSigns, Tag) - Method in interface nxopen.uf.UFModl
CreateExtrusionPath1Data() - Constructor for class nxopen.uf.UFModl.CreateExtrusionPath1Data
CreateExtrusionPathData() - Constructor for class nxopen.uf.UFModl.CreateExtrusionPathData
CreateFabricationBuilder - Interface in nxopen.routing
createFabricationBuilder(NXObject[]) - Method in interface nxopen.routing.RouteManager
Creates a
CreateFabricationBuilder which fabricate subassembly from standard parts, path segments, stock, and other routing objects within the current routing assembly
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
Created in NX8.0.0
Creates a nxopen.formboard.FaceAnnotationBuilder object for importing
CGM or Pattern file geometry and placing it on a drawing sheet or model view.
createFaceAttributeBuilder() - Method in interface nxopen.tooling.ManufacturingGeometryCollection
Creates a FaceAttribute builder.
createFaceAxis(IParameterizedSurface, SmartObject.UpdateOption) - Method in interface nxopen.LineCollection
Create a Axis line base on a Cylider, Cone, Torus or Revolve face
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
createFaceAxisNoExtension(IParameterizedSurface, SmartObject.UpdateOption) - Method in interface nxopen.LineCollection
Create a Axis line base on a Cylider, Cone, Torus or Revolve face.
createFaceAxisNoParentLoadRequired(IParameterizedSurface, SmartObject.UpdateOption) - Method in interface nxopen.LineCollection
Create a Axis line base on a Cylider, Cone, Torus or Revolve face.
createFaceBlendBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
Creates a Face Blend feature builder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.
createFaceClearanceCheckBuilder() - Method in interface nxopen.cae.ModelCheckManager
Provides access for creating face clearance check builder in a
FemPart part.
Creates face color management builder.
createFaceConstraint(UFModl.DfoRegion, UFModl.DfoConstraint) - Method in interface nxopen.uf.UFModlFeatures
createFaceCurvatureAnalysisBuilder(DisplayableObject) - Method in interface nxopen.geometricanalysis.AnalysisObjectCollection
Creates a face curvature analysis builder
License requirements: studio_analyze ("STUDIO ANALYZE")
.
createFaceFromBoundaryBuilder() - Method in interface nxopen.cae.AbstractionManager
Creates a
FaceFromBoundaryBuilder
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX8.5.0
Creates a planar milling facing operation builder
License requirements: cam_base ("CAM BASE")
.
createFaceOffset(String, Tag[]) - Method in interface nxopen.uf.UFModeling
createFacePair() - Method in interface nxopen.features.MidSurfaceByFacePairsBuilder
Create or edit a face pair from selected side1 and side2 faces
License requirements: solid_modeling ("SOLIDS MODELING")
.
createFacePairs() - Method in interface nxopen.cae.AutoPairs
Create face pairs whose distance is less than the distance tolerance stored
in the recipe.
CreateFacePairsData() - Constructor for class nxopen.cae.AutoPairs.CreateFacePairsData
createFacePercentageListItem() - Method in interface nxopen.features.PointSetBuilder
Create an entry for the face percentage list.
createFaceSet(String, ScCollector, boolean, int) - Method in interface nxopen.geometricutilities.FaceSetOffsetCollection
Creates an offset face set.
createFaceSplitBuilder() - Method in interface nxopen.tooling.FaceSplitCollection
createFaceTaper(double[], double[], String, Tag[]) - Method in interface nxopen.uf.UFModlFeatures
createFacetBody(Body[]) - Method in interface nxopen.facet.FacetedBodyCollection
Creates a JT
FacetedBody using the default faceting tolerances.
Creates a JT
FacetedBody using the default faceting tolerances.
Returns the value determines if a faceted output body is also created.
createFacetSettingsBuilder() - Method in interface nxopen.BasePart
Creates a builder for the Facet Settings dialog
License requirements: None.
createFamily(UFFam.FamilyData) - Method in interface nxopen.uf.UFFam
createFamilyInstance(Tag, int) - Method in interface nxopen.uf.UFPart
CreateFamilyInstanceData() - Constructor for class nxopen.uf.UFPart.CreateFamilyInstanceData
createFamilyMoldBuilder() - Method in interface nxopen.tooling.FamilyMoldCollection
Creates a Mold Wizard Family Mold builder
License requirements: None.
createFastenerConstraints(int) - Method in interface nxopen.tooling.FastenerAssy
Creates fastener assembly constraint
License requirements: None.
createFcf(FcfData, PmiData, Xform, Point3d, LeaderBundle) - Method in interface nxopen.annotations.FcfCollection
Creates an FCF
License requirements: geometric_tol ("GDT")
.
createFeature(NXObject[]) - Method in interface nxopen.cam.fbm.FeatureSet
Creates the feature using the specified tags
License requirements: cam_base ("CAM BASE")
.
createFeature() - Method in interface nxopen.MeasureAngle
Creates and returns a measurement feature
License requirements: solid_modeling ("SOLIDS MODELING")
.
createFeature() - Method in interface nxopen.MeasureBodies
Creates and returns a measurement feature to obtain mass properties of solid bodies
License requirements: solid_modeling ("SOLIDS MODELING")
.
createFeature() - Method in interface nxopen.MeasureDistance
Creates and returns a measurement feature
License requirements: solid_modeling ("SOLIDS MODELING")
.
createFeature() - Method in interface nxopen.MeasureFaces
Creates and returns a measurement feature
License requirements: solid_modeling ("SOLIDS MODELING")
.
createFeature() - Method in interface nxopen.MeasureLength
Creates and returns a measurement feature
License requirements: solid_modeling ("SOLIDS MODELING")
.
createFeature() - Method in interface nxopen.MeasurePoint
Creates and returns a measurement feature
License requirements: solid_modeling ("SOLIDS MODELING")
.
createFeature() - Method in interface nxopen.MeasurePolarAngle
Creates and returns a measurement feature
License requirements: solid_modeling ("SOLIDS MODELING")
.
createFeature() - Method in interface nxopen.MeasurePolarArea
Creates and returns a measurement feature
License requirements: solid_modeling ("SOLIDS MODELING")
.
createFeature() - Method in interface nxopen.MeasurePolarRadius
Creates and returns a measurement feature
License requirements: solid_modeling ("SOLIDS MODELING")
.
createFeature() - Method in interface nxopen.MeasureRectangularExtreme
Creates and returns a measurement feature
License requirements: solid_modeling ("SOLIDS MODELING")
.
createFeatureControlFrameDataBuilder(FeatureControlFrameData) - Method in interface nxopen.annotations.AnnotationManager
createFeatureEdgeNodeMethod(FEElement, int, double) - Method in interface nxopen.cae.SmartSelectionManager
createFeatureEdgeNodeMethod(FEElement[], int[], double) - Method in interface nxopen.cae.SmartSelectionManager
createFeatureEdgeNodeMethod(FEElemEdge[], double) - Method in interface nxopen.cae.SmartSelectionManager
Creates a feature edge node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createFeatureElemEdgeMethod(FEElement, int, double) - Method in interface nxopen.cae.SmartSelectionManager
createFeatureElemEdgeMethod(FEElement[], int[], double) - Method in interface nxopen.cae.SmartSelectionManager
createFeatureElemEdgeMethod(FEElemEdge[], double) - Method in interface nxopen.cae.SmartSelectionManager
Creates a feature elem edge method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createFeatureElemFaceMethod(FEElement, int, double) - Method in interface nxopen.cae.SmartSelectionManager
createFeatureElemFaceMethod(FEElement[], int[], double) - Method in interface nxopen.cae.SmartSelectionManager
createFeatureElemFaceMethod(FEElemFace[], double) - Method in interface nxopen.cae.SmartSelectionManager
Creates a feature elem face method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createFeatureElemMethod(FEElement, int, double) - Method in interface nxopen.cae.SmartSelectionManager
createFeatureElemMethod(FEElement[], int[], double) - Method in interface nxopen.cae.SmartSelectionManager
createFeatureElemMethod(FEElemFace[], double) - Method in interface nxopen.cae.SmartSelectionManager
Creates a feature elem method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createFeatureGeneralPropertiesBuilder(NXObject[]) - Method in interface nxopen.PropertiesManager
Create the FeatureGeneralPropertiesBuilder
License requirements: None.
createFeatureGroups() - Method in interface nxopen.cam.GroupFeatures
Create the feature groups
License requirements: cam_base ("CAM BASE")
.
createFeatureIdBusinessModifierBuilder(FeatureIdBusinessModifier) - Method in interface nxopen.annotations.BusinessModifierCollection
createFeatureMillingBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
Creates a planar milling hole (feature based) operation builder
License requirements: cam_base ("CAM BASE")
.
createFeatureNodeMethod(FEElement, int, double) - Method in interface nxopen.cae.SmartSelectionManager
createFeatureNodeMethod(FEElement[], int[], double) - Method in interface nxopen.cae.SmartSelectionManager
createFeatureNodeMethod(FEElemFace[], double) - Method in interface nxopen.cae.SmartSelectionManager
Creates a feature node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createFeatureOffset(String, Tag[]) - Method in interface nxopen.uf.UFModeling
createFeatureProcessBuilder() - Method in interface nxopen.cam.CAMSetup
Creates a CAM.FeatureProcessBuilder
License requirements: ug_holemaking ("UG Holemaking")
Created in NX7.5.0
createFeatureProcesses(CAMFeature[]) - Method in interface nxopen.cam.FeatureProcessBuilder
Creates operations for a set of features based of the current setting of the builder
License requirements: ug_holemaking ("UG Holemaking")
.
CreateFeatureProcessesData() - Constructor for class nxopen.cam.FeatureProcessBuilder.CreateFeatureProcessesData
createFeatureRecognitionBuilder(CAMObject) - Method in interface nxopen.cam.CAMSetup
Creates a CAM.FeatureRecognitionBuilder
License requirements: cam_base ("CAM BASE")
Created in NX6.0.0
createFeatureReplayBuilder() - Method in interface nxopen.features.FeatureCollection
Creates a
FeatureReplayBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX6.0.0
Creates a
FeaturesBatchOperationBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
Created in NX8.5.0
Create a new empty feature editor
License requirements: cam_base ("CAM BASE")
.
createFeatureSet(int) - Method in interface nxopen.weld.AutoPointBuilder
Creates a feature set containing weld points for a given interference.
createFeatureShellElemMethod(FEElement, double) - Method in interface nxopen.cae.SmartSelectionManager
Creates a feature shell elem method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createFeatureShellElemMethod(FEElement[], double) - Method in interface nxopen.cae.SmartSelectionManager
Creates a feature shell elem method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createFeaturesToMarkBuilder() - Method in interface nxopen.features.ShipCollection
Creates a
FeaturesToTagBuilder
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
Created in NX8.0.0
Creates a CAM.FeatureTeaching
License requirements: cam_base ("CAM BASE")
Created in NX8.0.0
createFedrat(UFVariant, double, String) - Method in interface nxopen.uf.UFPath
createFeedsBuilder(CAMObject[]) - Method in interface nxopen.cam.CAMSetup
Create Feeds builder.
createFeedsOptimizeBuilder(CAMObject) - Method in interface nxopen.cam.CAMSetup
Creates a feeds optimize builder
License requirements: cam_base ("CAM BASE")
.
createFem(String, Tag, String, boolean, int, Tag[], String, String, int, String[]) - Method in interface nxopen.uf.UFSf
createFemWithGeomOpts(String, Tag, String, boolean, int, Tag, String, String, int, String[], UFSf.GeomOptions) - Method in interface nxopen.uf.UFSf
createFiberOrientationOptionsBuilder() - Method in interface nxopen.cae.LaminateGlobalLayup
createField() - Method in interface nxopen.cae.ThicknessBuilder
The field creation
License requirements: nx_masterfem ("Finite Element Modeling")
.
createFieldExpression(String, Unit) - Method in interface nxopen.fields.FieldManager
createFieldExpression(String, Unit, FieldVariable[]) - Method in interface nxopen.fields.FieldManager
createFieldFormula(String, FieldVariable[], FieldExpression[]) - Method in interface nxopen.fields.FieldManager
createFieldLink(String, Field) - Method in interface nxopen.fields.FieldManager
createFieldLinksTable(String, FieldVariable[], FieldVariable[], double[], Field[]) - Method in interface nxopen.fields.FieldManager
Creates a
nxopen.fields.FieldLinksTable object with dependent and independent variables
FieldVariable .
Returns the option to create field of the across iteration graph created by expression
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
createFieldTable(String, FieldVariable[], FieldVariable[], double[]) - Method in interface nxopen.fields.FieldManager
Creates a
nxopen.fields.FieldTable object with dependent and independent variables
FieldVariable .
Creates a
nxopen.fields.FieldTable object with dependent and independent variables
FieldVariable .
Create a field wrapper backed up by a field
License requirements: None.
createFile(String) - Method in interface nxopen.markup.MarkupFileCollection
Adds a nxopen.Markup.File
License requirements: None.
createFilebox(String, String, String, String) - Method in interface nxopen.uf.UFUi
CreateFileboxData() - Constructor for class nxopen.uf.UFUi.CreateFileboxData
createFileboxWithMultipleFilters(String, String, String[], int, String) - Method in interface nxopen.uf.UFUi
CreateFileboxWithMultipleFiltersData() - Constructor for class nxopen.uf.UFUi.CreateFileboxWithMultipleFiltersData
createFillAreaBuilder(FillArea) - Method in interface nxopen.die.DieCollection
createFillBuilder(Fill) - Method in interface nxopen.weld.WeldManager
createFillerStockBuilder(NXObject[]) - Method in interface nxopen.routing.RouteManager
Creates a
FillerStockBuilder
License requirements: routing_harness ("Routing Harness")
Created in NX6.0.0
Creates a fillet face method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createFilletFaceMethod(CAEBody[], RadiusType, double, double, double, double) - Method in interface nxopen.cae.SmartSelectionManager
Creates a fillet face method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createFilletFaceMethod(CAEFace[], RadiusType, double, double, double, double) - Method in interface nxopen.cae.SmartSelectionManager
Creates a fillet face method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createFillHoleBuilder() - Method in interface nxopen.facet.FacetedBodyCollection
createFillHoleBuilder(FillHole) - Method in interface nxopen.features.FreeformSurfaceCollection
Creates a
FillHoleBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX9.0.0
Creates a
FilterBuilder which is used during selection
to allow for filtering ship objects with the same property settings.
Creates a
FindByAttributesBuilder
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
Created in NX8.5.0
Creates a finish turning operation builder
License requirements: cam_base ("CAM BASE")
.
createFirstCut(UFVariant, double[], double[]) - Method in interface nxopen.uf.UFDrpos
createFitCurveBuilder(FitCurve) - Method in interface nxopen.features.FeatureCollection
Creates a
FitCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX8.5.0
Creates a
FitSurfaceBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
Created in NX8.5.0
Create Fitting Points.
createFixedBuilder(Fixed) - Method in interface nxopen.features.FeatureCollection
Creates a
FixedBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
Created in NX7.0.0
Creates a fixed constraint
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
createFixedDatumAxis(Point3d, Point3d) - Method in interface nxopen.DatumCollection
Creates a fixed datum axis
Note: start and end only specify the
origin and start direction of the datum axis.
createFixedDatumPlane(Point3d, Matrix3x3) - Method in interface nxopen.DatumCollection
Creates a fixed datum plane
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
.
createFixedDaxis(double[], double[]) - Method in interface nxopen.uf.UFModlFeatures
createFixedDplane(double[], double[]) - Method in interface nxopen.uf.UFModlFeatures
createFixedJoint(Link) - Method in interface nxopen.motion.LinkCollection
Creates a
Joint
License requirements: mechanisms ("MECHANISMS")
Created in NX6.0.0
Create flange builder
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
createFlangeFeatureBuilder(nxopen.features.Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
Create a NXSM Flange feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
createFlatPattern(String, int, Tag) - Method in interface nxopen.uf.UFSmd
createFlatPatternBuilder(nxopen.features.Feature) - Method in interface nxopen.features.sheetmetal.AeroSheetmetalManager
Creates a
FlatPatternBuilder
License requirements: aero_sheet_metal ("Aerospace Sheet Metal")
Created in NX6.0.0
Create a NXSM Flat Pattern feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
createFlatPatternsBuilder() - Method in interface nxopen.cae.LaminateGlobalLayupMgr
Creates a
FlatPatternsBuilder
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
Created in NX6.0.0
Create flat solid builder
License requirements: aero_sheet_metal ("Aerospace Sheet Metal")
.
createFlatSolidFeatureBuilder(nxopen.features.Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
Create a NXSM Flat Solid feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
createFlexBodyBuilder(FlexBody) - Method in interface nxopen.motion.FlexBodyCollection
Creates a
FlexBodyBuilder
License requirements: mechanisms ("MECHANISMS")
Created in NX7.5.0
Creates a
FlexibleCableBuilder
License requirements: nx_flexible_pcb ("NX Flexible PCB")
Created in NX6.0.0
Creates a
FlipComponentBuilder object for
flipping of formboard component about an axis orthogonal to Z axis to ensure that
after flipping component lies in XY plane.
Returns the value (true or false) to decide if the floor of the post should be created
License requirements: None.
createFlowAnalysisBuilder() - Method in interface nxopen.tooling.MoldDesignCollection
Creates flow analysis builder
License requirements: ug_mold_design ("UG MOLD")
.
createFlowBlendBuilder(FlowBlend) - Method in interface nxopen.features.FeatureCollection
Creates a Features.FlowBlendBuilder
License requirements: flow_blend_for_nx (" Flow Blend"), solid_modeling ("SOLIDS MODELING")
Created in NX10.0.0
createFlowDisplayBuilder(DisplayableObject) - Method in interface nxopen.tooling.MoldDesignCollection
Creates flow display builder
License requirements: ug_mold_design ("UG MOLD")
.
createFlush(UFVariant, UFPath.Flush, String) - Method in interface nxopen.uf.UFPath
createFlushTank(UFVariant, UFPath.TankType, String) - Method in interface nxopen.uf.UFPath
createFolded() - Method in interface nxopen.drawings.SectionViewBuilder
Returns the create folded
License requirements: None.
createFoldedradiusDim(UFDrf.Object, UFDrf.Object, double[], double, UFDrf.Text, double[]) - Method in interface nxopen.uf.UFDrf
createFoldedRadiusDimension(DimensionData, Point3d) - Method in interface nxopen.annotations.DimensionCollection
Creates a folded radius dimension
License requirements: drafting ("DRAFTING")
.
createFolder(String, SimLbcFolder.Type, SimLbcFolder) - Method in interface nxopen.cae.SimLbcFolderCollection
Creates a lbc folder of the specified type, and optional makes it a subfolder if a parent folder is specified.
createFollowCurveMoveBuilder(Move) - Method in interface nxopen.cam.MoveCollection
Create Follow Curve Move.
createFollowPartMoveBuilder(Move) - Method in interface nxopen.cam.MoveCollection
Create Follow Part Move.
createForceCalculationBuilder() - Method in interface nxopen.tooling.ForceCalculationCollection
Creates force calculation builder
License requirements: None.
createFormat(String, ElectricalFormat.Type) - Method in interface nxopen.routing.electrical.ElectricalFormatCollection
createFormboardFrameByRectangle(Point, Scalar, Scalar) - Method in interface nxopen.routing.FormboardFrameCollection
Creates a
FormboardFrame object
using a rectangle defined by a
Point object and
two
Scalar objects that represent the height and width.
Creates forming insert builder.
createFormTbl(Tag) - Method in interface nxopen.uf.UFSmd
createFourPointSurfaceBuilder() - Method in interface nxopen.BodyCollection
Creates a Four Point Surface Builder
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
createFrameBarBuilder(FrameBar) - Method in interface nxopen.annotations.FrameBarCollection
If null create a new Frame bar, otherwise edit existing Frame bar Annotatation
License requirements: nx_ship_drafting ("Ship Drafting")
.
createFrameBarObject() - Method in interface nxopen.annotations.BaseFrameBarBuilder
Creates frame bar object
License requirements: nx_ship_drafting ("Ship Drafting")
.
createFrameBarOutBuilder(Feature) - Method in interface nxopen.features.ShipCollection
Creates a
FrameBarOutBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
Created in NX5.0.0
Creates a free body results builder.
createFreehand(Point2d[]) - Method in interface nxopen.markup.MarkupFileObjectCollection
Creates a nxopen.Markup.Freehand
License requirements: None.
createFreeTransformerBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
createFreezeGeometryBuilder(FreezeGeometryRecipe) - Method in interface nxopen.cae.GeometryRecipeCollection
createFrenetDaxis(Tag, Tag, String, int) - Method in interface nxopen.uf.UFModlFeatures
createFrfEvaluationSettingBuilder(FrfEvaluationSetting) - Method in interface nxopen.cae.responsesimulation.EvaluationSettingManager
Creates FRF evaluation setting object
License requirements: nx_response_anlys ("NX Response Analysis")
.
createFromDirs(int, String[]) - Method in interface nxopen.uf.UFDirpath
createFromEnv(String) - Method in interface nxopen.uf.UFDirpath
createFromTemplate(String, double[]) - Method in interface nxopen.uf.UFPlist
createFromTemplate(String, double[]) - Method in interface nxopen.uf.UFTabnot
createFtmFixedCurvesBuilder() - Method in interface nxopen.geometricutilities.OmnicadManager
Creates Free Transformer fixed curves builder.
createFtmTransformCurvesBuilder() - Method in interface nxopen.geometricutilities.OmnicadManager
Creates Free Transformer transform curves builder.
createFtmTransformPointsBuilder() - Method in interface nxopen.geometricutilities.OmnicadManager
Creates Free Transformer transform points builder.
createFullyFixedConstraints(Sketch.ConstraintGeometry) - Method in interface nxopen.Sketch
Creates enough fixed constraints on the curve and all of its vertices such that the geometry is fully
fixed without any redundant fixed constraints.
createFunction(UFMotion.Function) - Method in interface nxopen.uf.UFMotion
createFunction(Tag, String, String) - Method in interface nxopen.uf.UFRule
createFunctionBuilder(Function) - Method in interface nxopen.cae.FunctionCollection
Return
FunctionBuilder object
License requirements: nx_ftk ("NX Advanced Graphing")
Created in NX5.0.0
Create builder for FunctionObject class
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
createGanttExportPlcopenBuilder(GanttOperationObject) - Method in interface nxopen.mechatronics.GanttCollection
createGanttLinkerBuilder(GanttLinker) - Method in interface nxopen.mechatronics.GanttLinkerCollection
Creates a
GanttLinkerBuilder
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
Created in NX10.0.0
Creates a
GanttOperationBuilder
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
Created in NX7.5.1
Creates a builder for the Gap EAD block.
createGapFlushnessBuilder(GapFlushness) - Method in interface nxopen.geometricanalysis.AnalysisObjectCollection
Creates a gap and flushness builder
License requirements: solid_modeling ("SOLIDS MODELING")
.
createGaps() - Method in interface nxopen.drawings.ViewStyleTraceLinesBuilder
Returns the create gaps toggle on the TRACE LINES tab of the View Style Dialog
License requirements: None.
createGapsStatus() - Method in interface nxopen.drawings.TraceLinesViewStyle
Returns the status of create gaps
License requirements: None.
createGapsStatus() - Method in interface nxopen.preferences.TraceLinesViewPreferences
Returns the status of create gaps
License requirements: None.
createGatewayGroupBuilder(Group) - Method in interface nxopen.BasePart
Creates a Groups builder
License requirements: None.
createGdt(String[], Point3d, LetteringPreferences, UserSymbolPreferences, LineAndArrowPreferences, boolean, LeaderBundle) - Method in interface nxopen.annotations.AnnotationManager
Creates a GDT symbol
License requirements: drafting ("DRAFTING")
.
createGdtSymbol(int, String[], double[], UFDrf.LeaderType, UFDrf.LeaderAttachType, UFDrf.Object, double[], UFDrf.FrameCorner) - Method in interface nxopen.uf.UFDrf
createGdtSymbolWithMultipleLeaders(int, String[], double[], UFDrf.GdtLeader, UFDrf.FrameCorner) - Method in interface nxopen.uf.UFDrf
createGearBuilder(Gear) - Method in interface nxopen.mechatronics.GearCollection
createGeneralBushing(UFMotion.GeneralBushing) - Method in interface nxopen.uf.UFMotion
createGeneralCAMPropertiesBuilder(NXObject[]) - Method in interface nxopen.PropertiesManager
Create the CAM.GeneralCAMPropertiesBuilder
License requirements: None.
createGeneralConicBuilder(GeneralConic) - Method in interface nxopen.features.FeatureCollection
Creates a
GeneralConicBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
Created in NX8.5.0
Creates a general geometry section builder.
createGeneralInsertBuilder() - Method in interface nxopen.tooling.ProgressiveDieManager
createGeneralNoteBuilder(GeneralNote) - Method in interface nxopen.annotations.PmiAttributeCollection
createGenericPlateSystemBuilder(GenericPlateSystem) - Method in interface nxopen.features.ShipCollection
createGenericTrackingBuilder(SolidTrackPoint) - Method in interface nxopen.cam.Tool
Creates a Generic Trackpoint builder
License requirements: cam_base ("CAM BASE")
.
createGeodesicChamferBuilder(GeodesicChamfer) - Method in interface nxopen.features.GeodesicSketchCollection
createGeodesicCurves(int, Tag[], double[], double[], double, double) - Method in interface nxopen.uf.UFModlGeneral
CreateGeodesicCurvesData() - Constructor for class nxopen.uf.UFModlGeneral.CreateGeodesicCurvesData
createGeodesicDimensionBuilder(Dimension) - Method in interface nxopen.annotations.DimensionCollection
createGeodesicFilletBuilder(GeodesicFillet) - Method in interface nxopen.features.GeodesicSketchCollection
Creates a
GeodesicFilletBuilder
License requirements: nx_aero_design (" NX Aero Design")
Created in NX10.0.0
Creates a
GeodesicLineBuilder
License requirements: nx_aero_design (" NX Aero Design")
Created in NX10.0.0
Creates a
GeodesicOffsetBuilder
License requirements: nx_aero_design (" NX Aero Design")
Created in NX10.0.0
Creates a
GeodesicPointBuilder
License requirements: nx_aero_design (" NX Aero Design")
Created in NX10.0.0
Creates a
GeodesicResetBuilder
License requirements: nx_aero_design (" NX Aero Design")
Created in NX10.0.0
Creates a
GeodesicSketchBuilder
License requirements: nx_aero_design (" NX Aero Design")
Created in NX10.0.0
Creates a
GeodesicTrimBuilder
License requirements: nx_aero_design (" NX Aero Design")
Created in NX10.0.0
Creates a
GeomcopyBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX5.0.0
Perform geometric matching.
createGeometricPropertiesObject() - Method in interface nxopen.geometricanalysis.AnalysisManager
Creates a geometric properties object
License requirements: None.
createGeometry() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
Returns the create construction geometry flag.
createGeometry() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
Returns the create construction geometry flag.
createGeometry() - Method in interface nxopen.features.vehicledesign.HeadImpactFrontHeaderDetailBuilder
Returns the create construction geometry flag.
createGeometry() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder
Returns the create construction geometry flag.
createGeometry() - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailDetailBuilder
Returns the create construction geometry flag.
createGeometry() - Method in interface nxopen.features.vehicledesign.HeadImpactRearHeaderDetailBuilder
Returns the create construction geometry flag.
createGeometry() - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarDetailBuilder
Returns the create construction geometry flag.
createGeometry() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
Returns the create construction geometry flag.
createGeometry() - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofDetailBuilder
Returns the create construction geometry flag.
createGeometryLocationData() - Method in interface nxopen.geometricutilities.GeometryLocationDataCollection
Creates geometry location data.
createGeometrySet() - Method in interface nxopen.cam.Geometry
Create an empty geometry set
License requirements: cam_base ("CAM BASE")
.
createGeometrySet(NXObject) - Method in interface nxopen.cam.SurfaceDriveGeometry
Create a new geometry set
License requirements: cam_base ("CAM BASE")
.
createGlobalIlluminationBuilder() - Method in interface nxopen.ViewCollection
createGlobalLayup() - Method in interface nxopen.cae.LaminateGlobalLayupCollection
Create a new
LaminateGlobalLayup instance
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
Created in NX7.5.0
Creates a
GlobalShapingBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX5.0.0
Creates GmcOp builder
License requirements: cam_base ("CAM BASE")
.
createGovernmentSecurityInformationBuilder(GovernmentSecurityInformation) - Method in interface nxopen.annotations.PmiAttributeCollection
createGraphAcrossIterationsBuilder(int) - Method in interface nxopen.cae.ResultManager
Returns a builder used for creating graphs of postview result values across iterations.
createGraphAcrossIterationsBuilder(int, int) - Method in interface nxopen.cae.ResultManager
Returns a builder used for creating graphs of two postview result values across iterations.
createGraphAcrossIterationsBuilder(Result, ResultParameters) - Method in interface nxopen.cae.ResultManager
Returns a builder used for creating graphs across iterations of result values of result parameter.
createGraphAcrossIterationsBuilder(ResultProbe) - Method in interface nxopen.cae.ResultManager
Returns a builder used for creating graphs across iterations of result values of result parameter.
createGraphAcrossIterationsBuilder(Result, ResultParameters, ResultParameters) - Method in interface nxopen.cae.ResultManager
Returns a builder used for creating graphs across iterations of result values two result parameters.
createGraphAcrossIterationsBuilder(Result, ResultParameters[], String[], String) - Method in interface nxopen.cae.ResultManager
Returns a builder used for creating graphs across iterations of result values of expression.
createGraphAlongPathBuilder(int) - Method in interface nxopen.cae.ResultManager
Returns a builder used for creating the graph of result values of postview result defined by series of
entities or path object.
createGraphAlongPathBuilder(int, int) - Method in interface nxopen.cae.ResultManager
Returns a builder used for creating the graph of result values of two postviews
defined by series of entities or path object.
createGraphAlongPathBuilder(Result, ResultParameters) - Method in interface nxopen.cae.ResultManager
Returns a builder used for creating the graph of result values series of entities
or path object defined by result parameter.
createGraphAlongPathBuilder(ResultProbe) - Method in interface nxopen.cae.ResultManager
Returns a builder used for creating the graph of result values series of entities
or path object defined by result parameter.
createGraphAlongPathBuilder(Result, ResultParameters, ResultParameters) - Method in interface nxopen.cae.ResultManager
Returns a builder used for creating the graph of result values of series of entities
or path object defined by two result parameter.
createGraphBuilder(Graph) - Method in interface nxopen.motion.GraphManager
Creates a
GraphBuilder
License requirements: mechanisms ("MECHANISMS")
Created in NX5.0.0
Creates graph objects
License requirements: mechanisms ("MECHANISMS")
.
createGraphOrbitBuilder(int) - Method in interface nxopen.cae.ResultManager
Returns a builder used for creating the orbit graph from postview.
createGraphOrbitBuilder(Result, ResultParameters) - Method in interface nxopen.cae.ResultManager
Returns a builder used for creating the orbit graph from result defined by result parameter.
createGrooveMillingBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
Creates a Groove Milling operation builder
License requirements: cam_base ("CAM BASE")
.
createGroundClearanceBuilder(Feature) - Method in interface nxopen.features.AutomotiveCollection
createGroundClearanceBuilder(GroundClearance) - Method in interface nxopen.features.VehicleDesignCollection
Creates a
GroundClearanceBuilder
License requirements: nx_general_packaging ("NX General Packaging")
Created in NX9.0.0
Creates a group element method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createGroupFaceBuilder(GroupFace) - Method in interface nxopen.features.FeatureCollection
Creates a
GroupFaceBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
Created in NX6.0.0
Creates a group face method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createGroupMethod(CaeGroup) - Method in interface nxopen.cae.SmartSelectionManager
Creates a group method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createGroupNodeMethod(CaeGroup) - Method in interface nxopen.cae.SmartSelectionManager
Creates a group node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createGroups() - Method in interface nxopen.cae.LaminateExtrudeSetup
Create groups for each inflated meshes (one group per mesh).
createGuideCurves() - Method in interface nxopen.weld.JointmarkGuideBuilder
Creates the guide curves.
createGuidedExtensionBuilderEx(Feature) - Method in interface nxopen.features.FeatureCollection
createGuideLine(Edge, Point3d, Vector3d, double) - Method in interface nxopen.features.GuidedExtensionBuilderEx
Creates a guide line at one of the end points of the sheet edge in the selection.
createGuideLine(Edge, Point3d, Vector3d, double) - Method in interface nxopen.tooling.GuidedExtensionBuilder
Creates a guide line at one of the end points of the sheet edge in the selection.
createGuideLine(Curve, Point3d, double) - Method in interface nxopen.tooling.MWDesignGuideLinesBuilder
Create a guide line given a parting line and coordinates close to one of its end points.
CreateGuideLineData() - Constructor for class nxopen.tooling.MWDesignGuideLinesBuilder.CreateGuideLineData
createGussetBuilder(nxopen.features.Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
Creates a
GussetBuilder
License requirements: nx_sheet_metal ("NX Sheet Metal")
Created in NX7.5.0
Creates Routing.Electrical.HarnessDevice .
createHarnessDevice(String) - Method in interface nxopen.routing.electrical.HarnessDeviceCollection
Creates Routing.Electrical.HarnessDevice with given name.
createHatchBuilder(Hatch) - Method in interface nxopen.annotations.HatchCollection
Creates the HatchBuilder
License requirements: drafting ("DRAFTING")
.
createHeadBaseComponentBuilder(KinematicComponent) - Method in interface nxopen.sim.KinematicComponentCollection
Creates a bulder for head base component.
createHeadImpactApillarBuilder(Feature) - Method in interface nxopen.features.AutomotiveCollection
createHeadImpactApillarBuilder(HeadImpactAPillar) - Method in interface nxopen.features.VehicleDesignCollection
Creates a
HeadImpactAPillarBuilder
License requirements: nx_general_packaging ("NX General Packaging")
Created in NX9.0.0
Creates a
HeadImpactBPillarBuilder
License requirements: nx_general_packaging ("NX General Packaging")
Created in NX9.0.0
Creates a
HeadImpactBuilder
License requirements: nx_general_packaging ("NX General Packaging")
Created in NX9.0.0
Creates a
HeadImpactOPillarBuilder
License requirements: nx_general_packaging ("NX General Packaging")
Created in NX9.0.0
Creates a
HeadImpactRPillarBuilder
License requirements: nx_general_packaging ("NX General Packaging")
Created in NX9.0.0
Returns the setting to indicate if the adult and child head impact sheets should be created,
true they will be created, false they will not be created.
createHealPath() - Method in interface nxopen.routing.SegmentManager
createHealSpline(DisplayableObject, DisplayableObject, HealPath) - Method in interface nxopen.routing.SegmentManager
createHelicalMotion(UFVariant, UFPath.HelicalMotion) - Method in interface nxopen.uf.UFPath
createHelixBuilder(Helix) - Method in interface nxopen.features.FeatureCollection
Creates a
HelixBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX8.5.0
Create hem flange feature builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
createHideComponentBuilder() - Method in interface nxopen.assemblies.AssemblyManager
Creates a
HideComponentBuilder
License requirements: assemblies ("ASSEMBLIES MODULE")
Created in NX6.0.0
Creates a Highlight Lines Analysis builder
License requirements: studio_analyze ("STUDIO ANALYZE")
.
createHingeJointBuilder(HingeJoint) - Method in interface nxopen.mechatronics.HingeJointCollection
createHistoryGraph(int, String, Post.GraphParameters, int, int, int, int, double[]) - Method in interface nxopen.cae.Post
Create a graph by extracting data from the input postview id, at the input node label or point,
for the input iterations.
createHistoryList() - Method in interface nxopen.uf.UFPart
createHolderSection(Tag, UFCutter.HolderSection) - Method in interface nxopen.uf.UFCutter
createHoleBossBuilder(NXObject[], double, double, NXObject, int) - Method in interface nxopen.cam.HoleBossGeom
Create a new Hole or Boss
License requirements: cam_base ("CAM BASE")
.
createHoleDim(UFDrf.Object, UFDrf.Text, double[]) - Method in interface nxopen.uf.UFDrf
createHoleDimension(DimensionData, Point3d) - Method in interface nxopen.annotations.DimensionCollection
Creates a hole dimension
License requirements: drafting ("DRAFTING")
.
createHoleDrillingBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
Creates a Hole Drilling operation builder
License requirements: cam_base ("CAM BASE")
.
createHoleFeatureBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
Creates a Hole feature builder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.
createHoleIndexLabel(NXObject, String, NXObject, double, Point3d, String, boolean) - Method in interface nxopen.tooling.HoleManufacturingNoteBuilder
The method to create hole index
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
createHoleMakingBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
Creates a hole making operation builder
License requirements: cam_base ("CAM BASE")
.
createHoleManufacturingNoteAsNote(NXObject, String[], Point3d) - Method in interface nxopen.tooling.HoleManufacturingNoteBuilder
The method to create manufaturing information as note
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
createHoleManufacturingNoteBuilder() - Method in interface nxopen.tooling.HoleManufacturingNoteCollection
Creates manufacturing information builder.
createHolePackageBuilder(HolePackage) - Method in interface nxopen.features.FeatureCollection
Creates a
HolePackageBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX5.0.2
Returns the create hole patch.
createHollow(String, Tag[]) - Method in interface nxopen.uf.UFModlFeatures
createHoodVisibilityBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
createHoodVisibilityBuilder(HoodVisibility) - Method in interface nxopen.features.VehicleDesignCollection
Creates a
HoodVisibilityBuilder
License requirements: nx_general_packaging ("NX General Packaging")
Created in NX9.0.0
Creates a horizontal baseline dimension.
createHorizontalBaselineDimension(UFDrf.Object[], int, double[]) - Method in interface nxopen.uf.UFDrf
createHorizontalChainDimension(DimensionData, Point3d) - Method in interface nxopen.annotations.DimensionSetCollection
Creates a horizontal chain dimension.
createHorizontalChainDimension(UFDrf.Object, int, double[]) - Method in interface nxopen.uf.UFDrf
createHorizontalConstraint(Sketch.ConstraintGeometry) - Method in interface nxopen.Sketch
Creates a horizontal constraint
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
createHorizontalDim(UFDrf.Object, UFDrf.Object, UFDrf.Text, double[]) - Method in interface nxopen.uf.UFDrf
createHorizontalDimension(DimensionData, Point3d) - Method in interface nxopen.annotations.DimensionCollection
Creates a horizontal dimension
License requirements: drafting ("DRAFTING")
.
createHorizontalMargin(OrdinateOriginDimension, Associativity, double) - Method in interface nxopen.annotations.OrdinateMarginCollection
Creates a horizontal ordinate margin object
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
createHorizontalOrdinateAutoDimension(DimensionData, Point3d, boolean, boolean) - Method in interface nxopen.annotations.DimensionCollection
Creates a horizontal ordinate automatic dimension
License requirements: drafting ("DRAFTING")
.
createHorizontalOrdinateDimension(DimensionData, Point3d) - Method in interface nxopen.annotations.DimensionCollection
Creates a horizontal ordinate dimension
License requirements: drafting ("DRAFTING")
.
createHullBuilder(Hull) - Method in interface nxopen.features.ShipCollection
createHumanBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
Creates a human feature builder.
createHumanPosturePredictionBuilder(HumanPosturePrediction) - Method in interface nxopen.features.FeatureCollection
Creates a human posture prediction builder.
createHyperbola(Point3d, double, double, double, double, double, NXMatrix) - Method in interface nxopen.CurveCollection
createHyperbola(Point3d, Vector3d, Vector3d, double, double, double, double) - Method in interface nxopen.CurveCollection
createIcon(Point2d, String, Icon.Size) - Method in interface nxopen.markup.MarkupFileObjectCollection
Creates a nxopen.Markup.Icon
License requirements: None.
createIdealizeBody(Tag, UFVariant) - Method in interface nxopen.uf.UFSf
CreateIdealizeBodyData() - Constructor for class nxopen.uf.UFSf.CreateIdealizeBodyData
createIdealizeRegion(UFVariant, UFVariant) - Method in interface nxopen.uf.UFSf
CreateIdealizeRegionData() - Constructor for class nxopen.uf.UFSf.CreateIdealizeRegionData
createIdSymbol(UFDrf.IdSymbolType, String, String, double[], UFDrf.LeaderMode, UFDrf.LeaderAttachType, UFDrf.Object, double[]) - Method in interface nxopen.uf.UFDrf
createIdSymbolBuilder(IdSymbol) - Method in interface nxopen.annotations.IdSymbolCollection
Creates a
IdSymbolBuilder
License requirements: drafting ("DRAFTING")
Created in NX5.0.0
Creates a
IFormBuilder
License requirements: studio_free_form ("STUDIO FREE FORM")
Created in NX7.5.0
Create the IgesCreator
License requirements: None.
createIgesImporter() - Method in interface nxopen.DexManager
Create the IgesImporter
License requirements: None.
createImage(String, UFDisp.ImageFormat, UFDisp.BackgroundColor) - Method in interface nxopen.uf.UFDisp
createImage(String, Tag, double[]) - Method in interface nxopen.uf.UFDrf
createImage(View) - Method in interface nxopen.ViewCollection
Creates a
Image
License requirements: None.
Returns the setting to indicate if the impact grid should be created,
true it will be created, false it will not be created.
createImportAutocadBlockBuilder() - Method in interface nxopen.DraftingManager
Creates the Builder for the AutoCAD Block Importer
License requirements: nx_layout ("NX Layout")
.
createImportBuilder() - Method in interface nxopen.tooling.SIZERCollection
Creates a nxopen.tooling.SIZERImportBuilder
License requirements: None.
createImportBuilder() - Method in interface nxopen.weld.WeldManager
Creates a nxopen.weld.WeldImportBuilder object.
createImportData() - Method in interface nxopen.fields.FieldManager
Creates a Fields.ImportData
License requirements: None.
createImportedResult(String, Result.ResultBasicUnit) - Method in interface nxopen.cae.ResultManager
Creates a imported result object given a solver results file and the unit systems that these results are defined in.
createImportedResult(String, String, Result.ResultBasicUnit) - Method in interface nxopen.cae.ResultManager
Creates a imported result object given a solver results file and the unit systems that these results are defined in.
createImportedResult(String, String) - Method in interface nxopen.cae.ResultManager
Creates a imported result object given a solver results file.
createImportOperationBuilder() - Method in interface nxopen.pdm.PdmSession
Returns a new nxopen.pdm.PartOperationImportBuilder object
License requirements: None.
createImportSubdivisionGeometryBuilder() - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
createImportSymbolBuilder() - Method in interface nxopen.DraftingManager
Creates the Builder for the Symbol Importer
License requirements: nx_layout ("NX Layout")
.
createImprFaces(UFModl.ImprintFacesData) - Method in interface nxopen.uf.UFModlFeatures
createImprLoop(UFModl.ImprintLoopData) - Method in interface nxopen.uf.UFModlFeatures
createIndependent() - Method in interface nxopen.preferences.DetailViewPreferences
Returns the toogle create independent
License requirements: drafting ("DRAFTING")
.
createIndependentDetailView() - Method in interface nxopen.drawings.ViewStyleDetailBuilder
Returns the create independent detail view toggle on the DETAIL tab of the View Style Dialog
License requirements: None.
createIndependentVariable(Field, NameVariable, Unit, boolean, boolean, double, boolean, boolean, double, boolean, int, boolean, double) - Method in interface nxopen.fields.FieldManager
Create an independent variable to be added to the field
License requirements: None.
createInferConstraintsSetting() - Method in interface nxopen.Sketch
Returns the toggle that controls the creation of infer constraints in sketch
License requirements: None.
createInferredConstraints() - Method in interface nxopen.preferences.SessionSketch
Returns the create inferred constraints
License requirements: None.
createInferredConstraints() - Method in interface nxopen.preferences.SketchPreferences
Returns the option to control if inferred constraints are automatically created when curves and points are created in the sketch.
createInferredConstraintsBuilder() - Method in interface nxopen.SketchCollection
createInferredMaps() - Method in interface nxopen.geometricutilities.ReplAsstBuilder
Infer more matches from matches already 'Accepted'.
createInferredMargin(OrdinateOriginDimension, Point3d, int) - Method in interface nxopen.annotations.OrdinateMarginCollection
Creates an inferred ordinate margin object
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
createInfiniteLine(Point3d, Point3d) - Method in interface nxopen.CurveCollection
Creates a
InfiniteLine that passes through the two specified points.
Creates a
InformationBuilder
License requirements: ugweld ("UG WELD") OR structure_weld ("STRUCTURE WELD")
Created in NX9.0.0
Creates a
InitProjBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX6.0.0
Creates a
InnerAngleBuilder
License requirements: nx_general_packaging ("NX General Packaging")
Created in NX9.0.0
Create a inner profile set builder object.
createInpathEventDataBuilder() - Method in interface nxopen.cam.WedmCustomBoundaryDataBuilder
The create inpath event data builder
License requirements: cam_base ("CAM BASE")
.
createInsertAuxiliaryBuilder() - Method in interface nxopen.tooling.InsertAuxiliaryCollection
Creates insert auxiliary builder.
createInsertComponentBuilder() - Method in interface nxopen.layout2d.ComponentCollection
createInsertFramesBuilder(Feature) - Method in interface nxopen.features.ShipCollection
Create a InsertFramesBuilder.
createInsertSheetBodyBuilder(InsertSheetBody) - Method in interface nxopen.features.ShipCollection
Creates a
InsertSheetBodyBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
Created in NX5.0.0
Creates an Inspection Alignment Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
createInspectionAnalyzeBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
Creates a CMM Inspection Analyze dialog builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
createInspectionAnalyzeOutputBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
Creates a CMM Inspection Analyze Output dialog builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
createInspectionArcFeatureBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
Creates a CMM Inspection Arc Feature Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
createInspectionCircleFeatureBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
Creates an Inspection Circle Feature Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
createInspectionCmmCommandBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
Creates a CMM Inspection Cmm Command Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
createInspectionCollisionAvoidanceBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
Creates a CMM Inspection Collision Avoidance dialog builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
createInspectionConeFeatureBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
Creates an Inspection Cone Feature Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
createInspectionConstructedFeatureBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
Creates an Inspection Constructed Feature Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
createInspectionCparlnFeatureBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
Creates an Inspection Cparln Feature Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
createInspectionCreatePathsBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
Creates a CMM Inspection Create Paths dialog builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
createInspectionCurveFeatureBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
Creates an Inspection Curve Feature Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
createInspectionCylinderFeatureBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
Creates an Inspection Cylinder Feature Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
createInspectionDeleteMeaPtsBuilderSel(CAMObject[]) - Method in interface nxopen.cam.InspectionOperationCollection
Creates a CMM Inspection Delete Analyze Points dialog builder with selected operations
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
createInspectionDeltaMoveBuilder(InspectionMoveSubop) - Method in interface nxopen.cam.InspectionMoveCollection
Create a CMM Inspection Delta Move sub-operation.
createInspectionEdgePointFeatureBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
Creates a CMM Inspection Edge Point Feature dialog builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
createInspectionLinear5axisMoveToPointBuilder(InspectionMoveSubop) - Method in interface nxopen.cam.InspectionMoveCollection
Create a CMM Inspection Linear 5axis Move To Point sub-operation.
createInspectionLinearMoveToPointBuilder(InspectionMoveSubop) - Method in interface nxopen.cam.InspectionMoveCollection
Create a CMM Inspection Linear Move To Point sub-operation.
createInspectionLineFeatureBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
Creates an Inspection Line Feature Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
createInspectionLinkPmiBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
Creates a CMM Inspection Link PMI dialog builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
createInspectionMeasDataBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
Creates a CMM Inspection Analyze Measured Data dialog builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
createInspectionMeasurePointBuilder(InspectionMoveSubop) - Method in interface nxopen.cam.InspectionMoveCollection
Create a CMM Inspection Measure Point sub-operation.
createInspectionOperationTransformBuilder(CAMObject[]) - Method in interface nxopen.cam.InspectionOperationCollection
Creates a CMM Inspection Operation Transform dialog builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
createInspectionOutputOperationBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
Creates an Inspection Output Operation Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
createInspectionParplnFeatureBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
Creates an Inspection Parpln Feature Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
createInspectionPathBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
Creates a CMM Inspection Path Operation builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
createInspectionPatternFeatureBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
Creates an Inspection Pattern Feature Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
createInspectionPlaneFeatureBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
Creates an Inspection Plane Feature Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
createInspectionPointFeatureBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
Creates an Inspection Point Feature Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
createInspectionProbeTrackingBuilder(ProbeTrackPoint) - Method in interface nxopen.cam.InspectionTool
Creates a Probe Trackpoint builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
createInspectionSaveToLayerBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
Creates a CMM Inspection Analyze Save To Layer dialog builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
createInspectionSaveToLayerBuilderSel(CAMObject[]) - Method in interface nxopen.cam.InspectionOperationCollection
Creates a CMM Inspection Analyze Save To Layer dialog builder with selected operations
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
createInspectionScanArcBuilder(InspectionMoveSubop) - Method in interface nxopen.cam.InspectionMoveCollection
Create a CMM Inspection Scan Arc sub-operation.
createInspectionScanCurve5axisBuilder(InspectionMoveSubop) - Method in interface nxopen.cam.InspectionMoveCollection
Create a CMM Inspection 5 Axis Scan Curve sub-operation.
createInspectionScanCurveBuilder(InspectionMoveSubop) - Method in interface nxopen.cam.InspectionMoveCollection
Create a CMM Inspection Scan Curve sub-operation.
createInspectionScanHelixBuilder(InspectionMoveSubop) - Method in interface nxopen.cam.InspectionMoveCollection
Create a CMM Inspection Scan Helix sub-operation.
createInspectionScanLineBuilder(InspectionMoveSubop) - Method in interface nxopen.cam.InspectionMoveCollection
Create a CMM Inspection Scan Line sub-operation.
createInspectionSensorBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
Creates a CMM Inspection Sensor Operation builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
createInspectionSensorMassEditBuilder(InspectionMoveSubop) - Method in interface nxopen.cam.InspectionMoveCollection
Create a CMM Inspection subop sensor mass edit dialog builder.
createInspectionSession() - Method in interface nxopen.Session
Create the Inspection session
License requirements: None.
createInspectionSetup(String) - Method in interface nxopen.Part
Creates CMM Inspection setup
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
createInspectionSphereFeatureBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
Creates an Inspection Sphere Feature Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
createInspectionSurfaceFeatureBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
Creates an Inspection Surface Feature Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
createInspectionToleranceOperationBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
Creates a cmm tolerance operation builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
createInspectionTorusFeatureBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
Creates an Inspection Torus Feature Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
createInspectionUvgridBuilder(InspectionMoveSubop) - Method in interface nxopen.cam.InspectionMoveCollection
Create a CMM Inspection Rectangular UV Grid sub-operation.
createInstance(Tag, int) - Method in interface nxopen.uf.UFFam
createInstance(UFGdt.ToleranceType, Tag, Tag, Tag, double[], double[]) - Method in interface nxopen.uf.UFGdt
createInstanceFeatureBuilder(InstanceFeature) - Method in interface nxopen.features.FeatureCollection
Creates nxopen.features.InstanceFeatureBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX8.0.0
createInstanceFeatureBuilder(InstanceFeature[], boolean) - Method in interface nxopen.features.FeatureCollection
Creates nxopen.features.InstanceFeatureBuilder from multiple nxopen.features.InstanceFeature
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX8.0.0
createInstanceNameLookupBuilder() - Method in interface nxopen.routing.RouteManager
Creates a
InstanceNameLookupBuilder which is used to look up the
matching part to place based on the criteria defined in the INSTANCE_NAME_LOOKUP node and the ship
identifier specified in the customer defaults.
Create an integer attribute list entry and add it to the list.
createInterference(UFMotion.Interference) - Method in interface nxopen.uf.UFMotion
createInterferenceBody(Tag, int, UFMotion.ReferenceFrame) - Method in interface nxopen.uf.UFMotion
CreateInterferenceBodyData() - Constructor for class nxopen.uf.UFMotion.CreateInterferenceBodyData
createInterferenceBuilder(PackagingInterference) - Method in interface nxopen.motion.PackagingCollection
createInterferenceGeometry(DisplayableObject[], DisplayableObject[]) - Method in interface nxopen.assemblies.ClearanceSet
Construct interference geometry for a set of hard interferences.
createIntermediateDatumCsys() - Method in interface nxopen.SketchInPlaceBuilder
Returns the create intermediate datum csys toggle.
createIntermediateStageBuilder() - Method in interface nxopen.tooling.IntermediateStageCollection
Creates create direct unfold builder
License requirements: None.
createInterpartExpressionsBuilder() - Method in interface nxopen.ExpressionCollection
Creates interpart expressions.
createInterpartLink() - Method in interface nxopen.blockstyler.BodyCollector
Returns the CreateInterpartLink
License requirements: None.
createInterpartLink() - Method in interface nxopen.blockstyler.CurveCollector
Returns the CreateInterpartLink
License requirements: None.
createInterpartLink() - Method in interface nxopen.blockstyler.FaceCollector
Returns the CreateInterpartLink
License requirements: None.
createInterpartLink() - Method in interface nxopen.blockstyler.SectionBuilder
Returns the CreateInterpartLink
License requirements: None.
createInterpartLink() - Method in interface nxopen.blockstyler.SelectObject
Returns the CreateInterpartLink
License requirements: None.
createInterpartLink() - Method in interface nxopen.blockstyler.SpecifyCSYS
Returns the CreateInterpartLink
License requirements: None.
createInterpartLink() - Method in interface nxopen.blockstyler.SpecifyPoint
Returns the CreateInterpartLink
License requirements: None.
createInterpartLink() - Method in interface nxopen.blockstyler.SpecifyVector
Returns the CreateInterpartLink
License requirements: None.
createInterpartLink() - Method in interface nxopen.blockstyler.SuperPoint
Returns the CreateInterpartLink
License requirements: None.
createInterpartLink() - Method in interface nxopen.blockstyler.SuperSection
Returns the CreateInterpartLink
License requirements: None.
createIntersectFeature(Body, boolean, Body[], boolean, boolean) - Method in interface nxopen.features.FeatureCollection
Creates an intersect feature.
CreateIntersectFeatureData() - Constructor for class nxopen.features.FeatureCollection.CreateIntersectFeatureData
createIntersectionCurveBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
createIntersectionCurveBuilder(SketchIntersectionCurve) - Method in interface nxopen.SketchCollection
Creates the builder for intersection curve
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
createIntersectionDofset(String, CaeDOFSet[]) - Method in interface nxopen.cae.CaeDOFSetCollection
Create an Intersection of DOFSets
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
createIntersectionGeometry() - Method in interface nxopen.features.vehicledesign.AllAroundVisionBuilder
Returns the indication if the intersection geometry should be created.
createIntersectionPointBuilder(SketchIntersectionPoint) - Method in interface nxopen.SketchCollection
Creates the builder for intersection point
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
createIntersectionSymbolBuilder(IntersectionSymbol) - Method in interface nxopen.annotations.IntersectionSymbolCollection
Creates the IntersectionSymbolBuilder
License requirements: drafting ("DRAFTING")
.
createInterTransverseFrameListItem() - Method in interface nxopen.features.shipdesign.ItFramesBuilder
Create a list containing all required info to generate inter transverse frame.
createIntObject(int, Tag[], int, Tag[]) - Method in interface nxopen.uf.UFCurve
createInverseBendingLinesBuilder(InverseBendingLines) - Method in interface nxopen.features.ShipCollection
Creates a
InverseBendingLinesBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
Created in NX8.0.0
Creates a list item
License requirements: None.
createIsetArray(UFAssem.IsetArrayData) - Method in interface nxopen.uf.UFAssem
createIsocline(int, Tag[], double[], String, String, String) - Method in interface nxopen.uf.UFCurve
createIsoclineCurves(Tag, double[], double, double) - Method in interface nxopen.uf.UFModlGeneral
CreateIsoclineCurvesData() - Constructor for class nxopen.uf.UFModlGeneral.CreateIsoclineCurvesData
createIsoclines(Face[]) - Method in interface nxopen.tooling.FaceSplitBuilder
Create isocline
License requirements: None.
createIsocurve(Tag, int, double, double) - Method in interface nxopen.uf.UFModlGeneral
CreateIsocurveData() - Constructor for class nxopen.uf.UFModlGeneral.CreateIsocurveData
createIsoDrawing(Tag) - Method in interface nxopen.uf.UFRoute
createIsoDrawingBuilder() - Method in interface nxopen.routing.RouteManager
createIsolated(Arrangement, String) - Method in interface nxopen.assemblies.ArrangementCollection
createIsolateFeatureBuilder(IsolateFeature) - Method in interface nxopen.features.FeatureCollection
Creates a nxopen.features.IsolateFeatureBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX8.5.0
createIsoparametricCurvesBuilder(IsoparametricCurves) - Method in interface nxopen.features.FeatureCollection
createIssueAttachment(String, String, IssueAttachment.Type) - Method in interface nxopen.issue.IssueManager
Creates a
IssueAttachment
License requirements: nx_issue_mgmt ("NX Issue Tracking")
Created in NX8.5.0
Creates a
IssueContent
License requirements: nx_issue_mgmt ("NX Issue Tracking")
Created in NX8.5.0
Creates a
IssueContentBuilder
License requirements: nx_issue_mgmt ("NX Issue Tracking")
Created in NX8.5.0
Creates a
SnapshotSubsetBuilder
License requirements: nx_issue_mgmt ("NX Issue Tracking")
Created in NX9.0.0
Creates an isv control panel builder
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
createIsvControlPanelBuilder(IsvControlPanelBuilder.VisualizationType, String) - Method in interface nxopen.sim.KinematicConfigurator
createIsvControlPanelBuilder(IsvControlPanelBuilder.VisualizationType, NcChannelSelectionData) - Method in interface nxopen.sim.KinematicConfigurator
Creates an isv control panel builder with given machine code file name.
createItemBuilder() - Method in interface nxopen.cam.BoundaryTurnVariableStock
Create a new set
License requirements: cam_base ("CAM BASE")
.
createItFramesBuilder(Feature) - Method in interface nxopen.features.ShipCollection
Creates a
ItFramesBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
Created in NX5.0.0
Create a NXSM Jog feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
createJoggleBuilder(nxopen.features.Feature) - Method in interface nxopen.features.sheetmetal.AeroSheetmetalManager
Create joggle builder
License requirements: aero_sheet_metal ("Aerospace Sheet Metal")
.
createJoinCurvesBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
Creates a
JoinCurvesBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
Created in NX5.0.0
Return
JointBuilder object
License requirements: mechanisms ("MECHANISMS")
Created in NX5.0.0
Creates a
WeldJointBuilder
License requirements: structure_weld ("STRUCTURE WELD")
Created in NX8.0.0
Creates a
JointDriverBuilder
License requirements: mechanisms ("MECHANISMS")
Created in NX5.0.0
Creates a
JointExitBuilder
License requirements: structure_weld ("STRUCTURE WELD")
Created in NX8.0.0
Creates a
JointExitBuilder using the curve of a
WeldJoint
License requirements: structure_weld ("STRUCTURE WELD")
Created in NX8.5.0
Creates a builder for exporting a component or result type JT
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
CreateJtBuilder.Component - Class in nxopen.cae
This option is used to set the component for export
createJtCreator() - Method in interface nxopen.PvtransManager
Create the JtCreator
License requirements: None.
createJunction(UFVariant, String, String, double[], double[]) - Method in interface nxopen.uf.UFSim
createJunctionBuilder(KinematicComponent, KinematicJunction) - Method in interface nxopen.sim.KinematicConfigurator
Creates a builder for a kinematic junction
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder") OR resource_manager_nx ("Teamcenter Resource Manager")
.
createKinematicChain() - Method in interface nxopen.sim.KinematicConfigurator
Creates a builder for a kinematic chain
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
createKinematicConfigurator() - Method in interface nxopen.Part
Create an instance of
KinematicConfigurator
class that will be used to manage all Machine tool Builder and
Configurator objects
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder") OR resource_manager_nx ("Teamcenter Resource Manager")
Created in NX7.5.0
Creates a builder for a kinematic sinumerik ca config
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
createKnuckledProfilesBuilder(KnuckledProfiles) - Method in interface nxopen.features.ShipCollection
Creates a
KnuckledProfilesBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
Created in NX5.3.0
Creates a label.
createLabel(int, String[], double[], UFDrf.LeaderAttachType, UFDrf.Object, double[]) - Method in interface nxopen.uf.UFDrf
createLabelChamferBuilder(LabelChamfer) - Method in interface nxopen.features.FeatureCollection
Creates a
LabelChamferBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
Created in NX7.0.0
Creates a
LabelNotchBlendBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
Created in NX8.0.0
Creates a solution result object given a
LaminateDynamicEvent
It is user's responsibility to destroy the result object once done
using
ResultManager.deleteResult(nxopen.cae.Result) , in order to free up system resources
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX9.0.0
Creates a
LaminateFillSetupBuilder
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
Created in NX7.5.2
Creates a solution result object given a
nxopen.cae.LaminateGraphicalReport
It is user's responsibility to destroy the result object once done
using
ResultManager.deleteResult(nxopen.cae.Result) , in order to free up system resources
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX8.0.0
Create a Laser Circle Cutout.
createLaserHexagonCutout(Move) - Method in interface nxopen.cam.MoveCollection
Create a Laser Hexagon Cutout.
createLaserLinearMove(Move) - Method in interface nxopen.cam.MoveCollection
Create a Laser Linear Move.
createLaserProfileMove(Move) - Method in interface nxopen.cam.MoveCollection
Create a Laser Profile Move.
createLaserRectangleCutout(Move) - Method in interface nxopen.cam.MoveCollection
Create a Laser Rectangle Cutout.
createLaserSlotCutout(Move) - Method in interface nxopen.cam.MoveCollection
Create a Laser Slot Cutout.
createLaserTeachMode(CAMObject) - Method in interface nxopen.cam.OperationCollection
Creates a laser teach mode
License requirements: cam_base ("CAM BASE")
.
createLastStaggered() - Method in interface nxopen.geometricutilities.CircularPattern
Returns the option to generate the last item in a staggered row.
createLastStaggered() - Method in interface nxopen.geometricutilities.RectangularPattern
Returns the option to generate the last item in a staggered row.
createLatheMachineControlBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
Creates a lathe machine control operation builder
License requirements: cam_base ("CAM BASE")
.
createLatheUserDefinedBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
Creates a lathe user defined operation builder
License requirements: cam_base ("CAM BASE")
.
createLaw(int, String, String, UFModl.StringList, UFModl.StringList, int, double[], double[], Tag, int) - Method in interface nxopen.uf.UFModlGeneral
createLawCurveBuilder(LawCurve) - Method in interface nxopen.features.FeatureCollection
Creates a
LawCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX7.5.1
Creates a
LawExtensionBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX6.0.0
Creates a
LawExtensionBuilderEx
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX8.5.0
Creates a
EditComponentSettingsBuilder
This builder is the interface to edit the 2d component settings of layout
For multiple object settings, first create primary settings builder by passing all
selected 'n' objects.Then create 'n-1' secondary builders by passing single selected
object starting from second selected object.
Creates a
FormboardLayoutBuilder that can flatten and layout
new formboard geometry, or modify the layout of existing formboard geometry.
Creates a Layout builder
License requirements: None.
createLayoutManagementBuilder() - Method in interface nxopen.tooling.LayoutManagementCollection
Creates Layout Management builder.
createLayoutRepositionBuilder() - Method in interface nxopen.tooling.MWLayoutCollection
Creates a layout reposition builder
License requirements: None.
createLayoutView(Curve) - Method in interface nxopen.routing.electrical.CablewaysLayoutViewCollection
createLayupOffsetBuilder(LaminateLayupOffset) - Method in interface nxopen.cae.LaminateGlobalLayupMgr
createLcrResultsEvaluationSettingBuilder(LcrResultsEvaluationSetting) - Method in interface nxopen.cae.responsesimulation.EvaluationSettingManager
Creates LCR results evaluation setting object
License requirements: nx_response_anlys ("NX Response Analysis")
.
createLeaderData() - Method in interface nxopen.annotations.AnnotationManager
createLegend(UFSfLegend.Attr) - Method in interface nxopen.uf.UFSfLegend
createLegImpact() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
Returns the setting to indicate if the leg impact curves should be created,
true they will be created, false they will not be created.
createLength(Tag, Tag) - Method in interface nxopen.uf.UFGexp
CreateLengthData() - Constructor for class nxopen.uf.UFGexp.CreateLengthData
createLengthDimension(boolean) - Method in interface nxopen.SketchPolygonBuilder
The flag to indicate if we need to create length dimension
License requirements: None.
createLevelMarker(UFVariant, UFPath.LevelMarker) - Method in interface nxopen.uf.UFPath
createLightBuilder(Light) - Method in interface nxopen.ViewCollection
createLighting(View) - Method in interface nxopen.ViewCollection
Creates a
Lighting
License requirements: None.
Creates the path to be used for the limits.
createLine(Point3d, Point3d) - Method in interface nxopen.CurveCollection
createLine(Point, Point) - Method in interface nxopen.CurveCollection
createLine(UFCurve.Line) - Method in interface nxopen.uf.UFCurve
createLineArc(UFCurve.LineArc) - Method in interface nxopen.uf.UFCurve
createLineArc(UFCurve.LineArc) - Method in interface nxopen.uf.UFSfCurve
createLinearCline(int, UFDrf.Object[]) - Method in interface nxopen.uf.UFDrf
createLinearDimensionBuilder(Dimension) - Method in interface nxopen.annotations.DimensionCollection
createLinearDimensionBuilder(LinearDimension) - Method in interface nxopen.features.FeatureCollection
Creates a
LinearDimensionBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
Created in NX6.0.0
Creates a linear path builder for building a path consisting of
lines, arcs (bends) and elbows.
createLinearPathSettings() - Method in interface nxopen.routing.RouteManager
Creates a linear path settings object which stores preferences to
apply when creating linear paths using a
LinearPathBuilder .
Creates a PMI line target
License requirements: geometric_tol ("GDT")
.
createLineTarget(DatumTargetData, Point3d, LeaderBundle) - Method in interface nxopen.annotations.DatumTargetCollection
Creates a drafting line target
License requirements: drafting ("DRAFTING")
.
createLineTwoPoints(Tag, UFSo.UpdateOption, Tag[]) - Method in interface nxopen.uf.UFSo
createLineWeld(LineWeldData, Point3d, LeaderBundle) - Method in interface nxopen.annotations.WeldCollection
Creates a line weld.
createLineWeldBuilder(LineWeld) - Method in interface nxopen.annotations.WeldCollection
Creates a
LineWeldBuilder
License requirements: drafting ("DRAFTING")
Created in NX6.0.0
Creates a
LinkBuilder
License requirements: mechanisms ("MECHANISMS")
Created in NX5.0.0
Creates a
LinkedFacetBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX6.0.0
Creates a linked part module
License requirements: usr_defined_features ("USER DEFINED FEATURES")
.
createLinkedProfiles() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
Create linked curves of the profiles in the sketch from the other part.
createLinkedPtAngle(Tag, Tag, Tag, Tag) - Method in interface nxopen.uf.UFWave
createLinkedPtCenter(Tag, Tag, Tag) - Method in interface nxopen.uf.UFWave
createLinkedPtCurve(Tag, Tag, Tag, Tag) - Method in interface nxopen.uf.UFWave
createLinkedPtPoint(Tag, Tag, Tag) - Method in interface nxopen.uf.UFWave
createLinkedRegion(int, Tag[], int, Tag[], Tag, Tag, boolean, boolean, boolean) - Method in interface nxopen.uf.UFWave
createLinkedRoutePort(Tag, Tag, Tag) - Method in interface nxopen.uf.UFWave
createLinkedRouteSegment(Tag, Tag, Tag) - Method in interface nxopen.uf.UFWave
CreateLinkedRouteSegmentData() - Constructor for class nxopen.uf.UFWave.CreateLinkedRouteSegmentData
createLinkedSectionView(CutView) - Method in interface nxopen.CutViewCollection
Create a linked section view.
createLinkedSketch(Tag, Tag, Tag) - Method in interface nxopen.uf.UFWave
createLinkedString(Tag, Tag, Tag) - Method in interface nxopen.uf.UFWave
createList(String, String, String[], String[]) - Method in interface nxopen.issue.IssueSite
Creates an
IssueList
License requirements: nx_issue_mgmt ("NX Issue Tracking")
Created in NX9.0.0
Creates a
PhysicalMaterialListBuilder that controls the physical materials list UI block look and feel as well as capturing the interactions so the values/settings can be journaled.
Generate a list item.
createLoad(String, String) - Method in interface nxopen.cae.SimLoadCollection
Creates a load for the load descriptor passed
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
createLoadCase() - Method in interface nxopen.cae.optimization.TBSOptimizationManager
Create a
TBSLoadCase object
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
Created in NX8.0.0
Creates the load drafting standard builder
License requirements: None.
createLoadGroup() - Method in interface nxopen.cae.SimGroupContainer
Creates a load group for a solution or solution step
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
createLoading(BaseDataLoadingBuilder) - Method in interface nxopen.features.vehicledesign.BaseDataBuilder
createLoadInterpartDataBuilder() - Method in interface nxopen.assemblies.AssemblyManager
createLoadPatternBuilder(DurabilityLoadPattern) - Method in interface nxopen.cae.DurabilityExcitationCollection
createLoadSet(String, String, int) - Method in interface nxopen.cae.SimLoadSetCollection
Creates a
SimLoadSet
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX10.0.0
Creates a
SimLoadSetBuilder
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX10.0.0
Creates local definition folder builder instance.
createLocalLift(UFVariant) - Method in interface nxopen.uf.UFDrpos
createLocalRadiusAnalysisBuilder(LocalRadiusAnalysis) - Method in interface nxopen.geometricanalysis.AnalysisObjectCollection
createLocalRemeshBuilder() - Method in interface nxopen.cae.MeshManager
Creates a local remesh builder
License requirements: nx_masterfem ("Finite Element Modeling")
.
createLocalScale(UFModl.DfoScaleType, UFModl.DfoRegion, Tag, Tag, Tag, String[]) - Method in interface nxopen.uf.UFModlFeatures
createLocation() - Method in interface nxopen.tooling.ReliefDesignBuilder
Returns the location option to create relief, true: create relief at the location of forming region, false: create relief at the next station(offset one pitch).
createLocatorDesignatorBuilder(LocatorDesignator) - Method in interface nxopen.annotations.PmiAttributeCollection
createLockAngleBuilder() - Method in interface nxopen.cae.LaminateGlobalLayup
Creates a
LaminateLockAngleBuilder
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
Created in NX7.5.0
Create a NXSM Lofted Flange feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
createLogFile(UFClone.OperationClass, String, String, UFClone.GenLogOpts) - Method in interface nxopen.uf.UFClone
createLogicalAssociation(String, NXObject, NXObject[], boolean) - Method in interface nxopen.routing.RouteLogicalAssociationCollection
createLogicalObjects() - Method in interface nxopen.assemblies.DesignElementBuilder
Creates the pre-creation objects for the design elements
License requirements: nx_4gd_integration ("4th Generation Design")
.
createLogicalObjects() - Method in interface nxopen.features.shipdesign.CopyPasteNewBuilder
Creates the pre-creation logical objects
License requirements: nx_ship_detail ("Ship Detail Design")
.
createLogicalObjects() - Method in interface nxopen.pdm.ObjectCreateBuilder
Creates Pre-Creation LogicalObjects
License requirements: None.
createLogicalObjects() - Method in interface nxopen.pdm.PartOperationBuilder
Creates the pre-creation objects for the parts
License requirements: None.
createLogicObjectBuilder(LogicObject) - Method in interface nxopen.mechatronics.LogicObjectCollection
Create builder for LogicObject class
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
createLongitudinalBulkheadBuilder(LongitudinalBulkhead) - Method in interface nxopen.features.ShipCollection
createLoopSet() - Method in interface nxopen.cam.CustomLoops
createLouverFeatureBuilder(nxopen.features.Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
Create a NXSM Louver feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
createLsdynaFormAnalysisResultDisplayBuilder() - Method in interface nxopen.tooling.AutoDieCollection
Creates a LS-Dyna Formability Analysis - Result Display builder
License requirements: die_engineering ("DIE ENGINEERING")
.
createLsdynaGeometryPreparationBuilder() - Method in interface nxopen.tooling.AutoDieCollection
Creates a formability analysis geometry preparation builder
License requirements: die_engineering ("DIE ENGINEERING")
.
createLSDynaKFile(String) - Method in interface nxopen.tooling.LsdynaKfileGeneratorBuilder
Creates LS-DYNA K file.
createLsdynaKfileGeneratorBuilder() - Method in interface nxopen.tooling.AutoDieCollection
Creates a LS-Dyna integration builder.
createLumpedMassEadBuilder() - Method in interface nxopen.cae.NodeElementManager
Creates a builder for the Lumped Mass EAD block.
createLvNx(String, double, int, UFSf.LvFunctionMode, Tag, Tag) - Method in interface nxopen.uf.UFSf
createMachineBaseComponentBuilder(KinematicComponent) - Method in interface nxopen.sim.KinematicComponentCollection
Creates a builder for a machine base component.
createMachineReliefBuilder(MachineRelief) - Method in interface nxopen.die.DieCollection
createMachiningFeature(String, int, Tag[]) - Method in interface nxopen.uf.UFMfm
createMachiningFeaturesFromModelingFeatures(int, Tag[], int, String[]) - Method in interface nxopen.uf.UFMfm
CreateMachiningFeaturesFromModelingFeaturesData() - Constructor for class nxopen.uf.UFMfm.CreateMachiningFeaturesFromModelingFeaturesData
createMachiningFeaturesFromRecognizedFeatures(int, Tag[]) - Method in interface nxopen.uf.UFMfm
CreateMachiningFeaturesFromRecognizedFeaturesData() - Constructor for class nxopen.uf.UFMfm.CreateMachiningFeaturesFromRecognizedFeaturesData
createMachiningFeaturesFromTaggedArcs() - Method in interface nxopen.uf.UFMfm
CreateMachiningFeaturesFromTaggedArcsData() - Constructor for class nxopen.uf.UFMfm.CreateMachiningFeaturesFromTaggedArcsData
createMachiningFeaturesFromTaggedEdges(int, Tag[]) - Method in interface nxopen.uf.UFMfm
CreateMachiningFeaturesFromTaggedEdgesData() - Constructor for class nxopen.uf.UFMfm.CreateMachiningFeaturesFromTaggedEdgesData
createMachiningFeaturesFromTaggedFaces(int, Tag[]) - Method in interface nxopen.uf.UFMfm
CreateMachiningFeaturesFromTaggedFacesData() - Constructor for class nxopen.uf.UFMfm.CreateMachiningFeaturesFromTaggedFacesData
createMachiningFeaturesFromTaggedPoints() - Method in interface nxopen.uf.UFMfm
CreateMachiningFeaturesFromTaggedPointsData() - Constructor for class nxopen.uf.UFMfm.CreateMachiningFeaturesFromTaggedPointsData
createMachiningFeaturesFromUserDefinedFeatures(int, Tag[], int, String[]) - Method in interface nxopen.uf.UFMfm
CreateMachiningFeaturesFromUserDefinedFeaturesData() - Constructor for class nxopen.uf.UFMfm.CreateMachiningFeaturesFromUserDefinedFeaturesData
createMainDimensionsBuilder(Feature) - Method in interface nxopen.features.ShipCollection
Creates a
MainDimensionsBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
Created in NX5.0.0
Creates a major angular dimension
License requirements: drafting ("DRAFTING")
.
createMajorAngularDimensionBuilder(MajorAngularDimension) - Method in interface nxopen.annotations.DimensionCollection
createMakeComponentUniqueBuilder() - Method in interface nxopen.layout2d.ComponentCollection
Creates a
MakeComponentUniqueBuilder that can create definition
for the selected 2D Component instance
License requirements: nx_layout ("NX Layout")
Created in NX10.0.0
Creates a
MakeOffsetBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
Created in NX7.0.0
Creates a
SketchMakeSymmetricBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
Created in NX7.5.0
Creates a
MakeUniquePartBuilder
License requirements: assemblies ("ASSEMBLIES MODULE")
Created in NX8.0.0
Creates a
ManikinBuilder
License requirements: nx_general_packaging ("NX General Packaging")
Created in NX9.0.0
Creates a new manual feature builder
License requirements: None.
createManualMorphBuilder() - Method in interface nxopen.cae.NodeElementManager
Creates a builder for Manual Morphing command
License requirements: nx_masterfem ("Finite Element Modeling")
.
createManualNodeAssociationBuilder() - Method in interface nxopen.cae.NodeElementManager
Creates a builder for manual node association command
License requirements: nx_masterfem ("Finite Element Modeling")
.
createManualRouteBuilder(ElectricalStockDevice.RouteLevel, ElectricalStockDevice) - Method in interface nxopen.routing.RouteManager
createManualRow(double) - Method in interface nxopen.uf.UFPlist
createManufacturingDataBuilder() - Method in interface nxopen.features.ShipCollection
Creates a
ManufacturingDataBuilder
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
Created in NX8.0.0
Creates a
ManufacturingOutBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
Created in NX5.3.0
Creates the object for user defined manual maps
License requirements: nx_masterfem ("Finite Element Modeling")
.
createMapleBuilder(Maple) - Method in interface nxopen.features.FeatureCollection
Creates a
MapleBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX7.5.0
Create builder for MapleExpBuilder class
License requirements: None.
createMappedMeshBuilder(MappedMesh) - Method in interface nxopen.cae.MeshManager
Creates a mapped mesh builder
License requirements: nx_masterfem ("Finite Element Modeling")
.
createMarkAsTemplateBuilder() - Method in interface nxopen.DraftingManager
createMarker(int, int) - Method in interface nxopen.cae.xyplot.Graph
Creates the display marker on the graph.
createMarker(UFMotion.Marker) - Method in interface nxopen.uf.UFMotion
createMarkerBuilder(Marker) - Method in interface nxopen.motion.MarkerCollection
Creates a
MarkerBuilder
License requirements: mechanisms ("MECHANISMS")
Created in NX6.0.0
Creates a
MarkingLineBuilder
License requirements: nx_ship_concept ("Ship Concept")
Created in NX5.0.0
Create the MassPropertiesBuilder
License requirements: None.
createMasterCutBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
Create a Master Cut builder
License requirements: solid_modeling ("SOLIDS MODELING")
.
createMasterSymbolBuilder(MasterSymbol) - Method in interface nxopen.annotations.CustomSymbolCollection
Creates the Master Symbol builder
License requirements: None.
createMasterSymbolListItemBuilder() - Method in interface nxopen.annotations.CustomSymbolCollection
Creates the Master Symbol List Item builder
License requirements: None.
createMatchEdgeBuilder(MatchEdge) - Method in interface nxopen.features.FeatureCollection
Creates a
MatchEdgeBuilder
License requirements: features_modeling ("FEATURES MODELING")
Created in NX6.0.0
Creates a PhysMat.MaterialAssignBuilder that is used to control/set the material assign UI as well as to assign materials to bodies.
createMaterialEstimationBuilder() - Method in interface nxopen.features.ShipCollection
Creates a Features.ShipDesign.MaterialEstimationBuilder.
createMaterialLibmgrBuilder() - Method in interface nxopen.PhysicalMaterialCollection
Creates a PhysMat.PhysicalMaterialLibMgrBuilder used by the material library manager UI to control the look and feel as well as capturing the interactions so the values/settings can be journaled.
createMaterialSpecificationBuilder(MaterialSpecification) - Method in interface nxopen.annotations.PmiAttributeCollection
createMatingConverter() - Method in interface nxopen.assemblies.ComponentAssembly
createMatrix(double[]) - Method in interface nxopen.uf.UFCsys
createMcArray(UFAssem.McArrayData) - Method in interface nxopen.uf.UFAssem
createMeasureAngleBuilder(NXObject) - Method in interface nxopen.MeasureManager
Creates a
MeasureAngleBuilder
Note: This class is used internally for measurement, but is not required for creation
of an angle measurement.
Creates a
MeasureBodyBuilder
Note: This class is used internally for measurement, but is not required for creation
of a face measurement.
Creates a
MeasureDistanceBuilder
Note: This class is used internally for measurement, but is not required for creation
of a distance measurement.
Creates a
MeasureFaceBuilder
Note: This class is used internally for measurement, but is not required for creation
of a face measurement.
Creates a builder for mechanical load summary command
License requirements: nx_masterfem ("Finite Element Modeling")
.
createMember(int) - Method in interface nxopen.PartFamilyManager
createMemberIdentifier(FamilyAttribute[], String[], String) - Method in interface nxopen.partfamily.TemplateManager
Creates a member identifier for a part family member from the key attributes
and value pair.
createMenu() - Method in interface nxopen.blockstyler.Tree
Creates the menu.
createMenu() - Method in interface nxopen.blockstyler.Wizard
Creates a popup menu.
createMergeFacetBodyBuilder() - Method in interface nxopen.facet.FacetedBodyCollection
Creates a
MergeFacetBodyBuilder
License requirements: studio_free_form ("STUDIO FREE FORM") OR die_engineering ("DIE ENGINEERING")
Created in NX9.0.0
Creates a 0d mesh builder
License requirements: nx_masterfem ("Finite Element Modeling")
.
createMesh1dBuilder(Mesh1d) - Method in interface nxopen.cae.MeshManager
Creates a 1d mesh builder
License requirements: nx_masterfem ("Finite Element Modeling")
.
createMesh2dBuilder(Mesh2d) - Method in interface nxopen.cae.MeshManager
Creates a 2d mesh builder
License requirements: nx_masterfem ("Finite Element Modeling")
.
createMesh3dHexBuilder(SweptMesh) - Method in interface nxopen.cae.MeshManager
Creates a 3d Hex mesh builder
License requirements: nx_masterfem ("Finite Element Modeling")
.
createMesh3dTetBuilder(Mesh3d) - Method in interface nxopen.cae.MeshManager
Creates a 3d Tet mesh builder
License requirements: nx_masterfem ("Finite Element Modeling")
.
createMeshFromBoundaryBuilder() - Method in interface nxopen.cae.NodeElementManager
Creates Mesh From Boundary builder.
createMeshMatingCondition(Tag, Tag, String, int, UFSf.AssemblyType, double, double) - Method in interface nxopen.uf.UFSf
createMeshpointConicCenterBuilder() - Method in interface nxopen.cae.MeshPointCollection
createMeshpointExistingPointBuilder() - Method in interface nxopen.cae.MeshPointCollection
createMeshpointMultipleOnCurveBuilder() - Method in interface nxopen.cae.MeshPointCollection
createMeshpointOnCurveBuilder() - Method in interface nxopen.cae.MeshPointCollection
createMeshpointOnFaceBuilder() - Method in interface nxopen.cae.MeshPointCollection
createMeshpointProjectBuilder() - Method in interface nxopen.cae.MeshPointCollection
createMeshSurfaceBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
Creates a Mesh Surface feature builder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.
createMeshTransformerBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
createMetaformBuilder(nxopen.features.Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
Creates a
MetaformBuilder
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
Created in NX7.5.0
Creates the builder object of durability meta solution.
createMethod() - Method in interface nxopen.weld.WeldJointBuilder
Returns the creation method
License requirements: None.
createMfgData() - Method in interface nxopen.features.shipdesign.ManufacturingDataBuilder
Loops through all the parts and creates manufacturing data on those parts containing Plate or Stiffener Steel Features
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
createMidpointConstraint(Sketch.ConstraintGeometry, Sketch.ConstraintGeometry) - Method in interface nxopen.Sketch
Creates a midpoint constraint.
createMidsrfFeature(Tag) - Method in interface nxopen.uf.UFModlFeatures
createMidSurfaceByFacePairsBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
createMidSurfaceUserDefinedBuilder(MidSurfaceUserDefined) - Method in interface nxopen.features.FeatureCollection
createMigratedPanelFeatureBuilder(nxopen.features.Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
Create a NXSM Migrated Panel feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
createMillMachineControlBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
Creates a mill machine control operation builder
License requirements: cam_base ("CAM BASE")
.
createMillToolProbingBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
Creates a mill tool probing operation builder
License requirements: cam_base ("CAM BASE")
.
createMillUserDefinedBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
Creates a mill user defined operation builder
License requirements: cam_base ("CAM BASE")
.
createMinorAngularDimension(DimensionData, Point3d) - Method in interface nxopen.annotations.DimensionCollection
Creates a minor angular dimension
License requirements: drafting ("DRAFTING")
.
createMinorAngularDimensionBuilder(MinorAngularDimension) - Method in interface nxopen.annotations.DimensionCollection
createMirrorBody(Tag, Tag) - Method in interface nxopen.uf.UFModeling
createMirrorBodyBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
Creates a
MirrorBodyBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
Created in NX5.0.0
Creates
MirrorBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX8.0.1
Creates a
MirrorCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX6.0.0
Creates a mirror face builder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
.
createMirrorFeatureBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
Creates nxopen.features.MirrorFeatureBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX5.0.0
createMirrorPatternFace(UFModl.DfoRegion, Tag) - Method in interface nxopen.uf.UFModlFeatures
createMirrorSet(Tag[], int, Tag) - Method in interface nxopen.uf.UFModeling
createMirrorShipStructureBuilder() - Method in interface nxopen.features.ShipCollection
createMiterCorner(Tag) - Method in interface nxopen.uf.UFRoute
createMmcCreateBuilder(MeshMate) - Method in interface nxopen.cae.MeshControlCollection
Creates a builder for the MMC Create command.
createMode() - Method in interface nxopen.RuleManager
Returns the create mode flag.
createModel(Tag) - Method in interface nxopen.uf.UFFacet
createModelDisplayBuilder() - Method in interface nxopen.cae.CaePart
Creates a builder for model display controls command
License requirements: nx_masterfem ("Finite Element Modeling")
.
createModelSetupCheckBuilder() - Method in interface nxopen.cae.ModelCheckManager
Provides access for creating model setup check builder in a
SimPart part
or
AssyFemPart
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX8.5.0
Create a model subset for result measure
License requirements: nx_masterfem ("Finite Element Modeling")
.
createModelUpdateDesignVariablesRapidCreateBuilderBuilder() - Method in interface nxopen.cae.CorrelManager
Creates a builder for rapid creation of design variables.
createModePairingBuilder() - Method in interface nxopen.cae.CorrelSolution
Creates the builder object for mode pairing editing
License requirements: nx_correl_base ("FE Correlation")
.
createMoldCsysBuilder() - Method in interface nxopen.tooling.MoldCsysCollection
Creates mold csys builder
License requirements: None.
createMoldInsertBuilder() - Method in interface nxopen.tooling.MoldInsertCollection
Creates a MoldInsert builder
License requirements: None.
createMoldProcessBuilder() - Method in interface nxopen.tooling.MoldProcessCollection
Creates a Mold Process builder
License requirements: None.
createMotionLoadsBuilder() - Method in interface nxopen.cae.SimSimulation
Creates a
SimMotionLoadsBuilder
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX5.0.1
Creates a
SimMotionLoadsListItemBuilder
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX5.0.1
Creates a
MotionSensorBuilder
License requirements: mechanisms ("MECHANISMS")
Created in NX6.0.0
Creates a
MoveCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
Created in NX9.0.0
Creates a
MoveEdgeBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
Created in NX9.0.0
Create a move face builder, don't use it until nx502
License requirements: solid_modeling ("SOLIDS MODELING")
.
createMoveObjectBuilder(MoveObject) - Method in interface nxopen.features.BaseFeatureCollection
createMoveToDrawingViewBuilder() - Method in interface nxopen.drafting.DraftingApplicationManager
createMoveToPointBuilder(Move) - Method in interface nxopen.cam.MoveCollection
Create a Move to Point.
createMovieSettingsBuilder() - Method in interface nxopen.MovieManager
createMsetPart(CloneObject) - Method in interface nxopen.tooling.ElectrodeInitializationBuilder
Creates the mset part.
createMultiPatchAlignmentBuilder() - Method in interface nxopen.facet.FacetedBodyCollection
createMultipleElementCreateBuilder(int) - Method in interface nxopen.cae.NodeElementManager
Creates a builder for the creation of multiple elements.
createMultipleNodeCreateBuilder(int) - Method in interface nxopen.cae.NodeElementManager
Creates a builder for the creation of multiple nodes.
createMultipleSews(Tag, int, Tag[], double) - Method in interface nxopen.uf.UFModeling
CreateMultipleSewsData() - Constructor for class nxopen.uf.UFModeling.CreateMultipleSewsData
createMultiportFromPosition(Tag, double[], boolean, double[], boolean, String) - Method in interface nxopen.uf.UFRoute
createMultiTransitionLaw(UFModl.StringList, int, double[], String[], int[]) - Method in interface nxopen.uf.UFModlGeneral
createMWMoldedPartValidationBuilder() - Method in interface nxopen.tooling.MWMoldedPartValidationManager
Creates a MWMoldedPartValidation builder
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
createNameBasedMaps() - Method in interface nxopen.geometricutilities.ReplAsstBuilder
Perform automatic matching based on user-defined object names.
createNamedGroup() - Method in interface nxopen.PartImporter
Returns the Create Named Group flag.
createNamingSimulation(NXObject, String) - Method in interface nxopen.motion.MotionSession
Create the Simulation with an input name.
createNCAssistantBuilder() - Method in interface nxopen.cam.CAMSetup
Creates NC Assistant builder
License requirements: cam_base ("CAM BASE")
.
createNcChannelSelectionData() - Method in interface nxopen.sim.KinematicConfigurator
Creates an NcChannelSelectionData object to which files and channels can be assigned.
createNcmctPartMountingBuilder(String) - Method in interface nxopen.cam.CAMSetup
Creates a Part Mounting Builder.
createNcmctPartMountingBuilder(String) - Method in interface nxopen.cam.InspectionSetup
Creates a Part Mounting Builder.
createNestModuleBuilder() - Method in interface nxopen.features.FeatureCollection
createNewAfuFile(String) - Method in interface nxopen.cae.AfuManager
Create a new empty AFU file
License requirements: nx_ftk ("NX Advanced Graphing")
.
createNewAnchorPoint() - Method in interface nxopen.features.shipdesign.QualifySketchBuilder
Creates the anchor point.
createNewComponent(TaggedObject, Point3d) - Method in interface nxopen.tooling.BurringInsertBuilder
Create new component.
createNewComponent(String, String) - Method in interface nxopen.tooling.DesignTrimToolBuilder
Create a new trim part component in the work part.
createNewComponent(TaggedObject, Point3d) - Method in interface nxopen.tooling.FormingInsertBuilder
Create new component.
createNewComponentBuilder() - Method in interface nxopen.assemblies.AssemblyManager
CreateNewComponentBuilder - Interface in nxopen.assemblies
createNewComponentBuilder() - Method in interface nxopen.layout2d.ComponentCollection
Creates a
NewComponentBuilder that creates an empty 2D Component instance and stores its
definition in local 2D Component folder
License requirements: nx_layout ("NX Layout")
Created in NX10.0.0
Set the origin type
CreateNewComponentBuilder.ComponentLayerOptionType - Class in nxopen.assemblies
Set the layer option type
CreateNewComponentBuilder.ComponentOriginType - Class in nxopen.assemblies
Set the cam component type
CreateNewComponentBuilder.ComponentReferenceSetType - Class in nxopen.assemblies
Set the reference set
createNewDivisionsListItem(Port, boolean) - Method in interface nxopen.routing.SplitDuctBuilder
Creates a new item for the divisions list in Split Duct dialog
License requirements: routing_hvac ("Routing HVAC")
.
createNewListItem(Annotation, String[]) - Method in interface nxopen.annotations.MasterSymbolBuilder
Create Master Symbol list item builder
License requirements: None.
createNewListItem(CAEEdge, CAEEdge, boolean) - Method in interface nxopen.cae.DependentMeshBuilder
The list item
License requirements: nx_masterfem ("Finite Element Modeling")
.
createNewListItem(CAEEdge, CAEEdge, boolean) - Method in interface nxopen.cae.ManualSweepBetweenSelection
createNewListItem(CAEEdge, CAEEdge, boolean) - Method in interface nxopen.cae.Mesh3dHexBuilder
The list item
License requirements: nx_masterfem ("Finite Element Modeling")
.
createNewListItem(String, String) - Method in interface nxopen.cae.SimMotionLoadsBuilder
Create a motion loads list item builder from link and solution name
License requirements: None.
createNewRadialBend(Point3d, int, double, Point3d, int, double) - Method in interface nxopen.formboard.ShapeSegmentBuilder
License requirements: routing_harness ("Routing Harness")
.
createNewRegion(NXObject) - Method in interface nxopen.features.shipdesign.OrientationDefinitionBuilder
Creates a new region on the landing curve to allow you to change the orientation for this area of the landing curve.
createNewRegion() - Method in interface nxopen.tooling.MWDefineRegionsBuilder
Create a new region
License requirements: None.
createNewRegionButton() - Method in interface nxopen.tooling.MWDefineRegionsBuilder
Button to create a new empty region
License requirements: None.
createNewRowAsLocked() - Method in interface nxopen.annotations.PartsListBuilder
Returns the create new row as locked option that determines whether new rows in the parts list are locked automatically on creation
License requirements: None.
createNewRowsAsLocked - Variable in class nxopen.uf.UFPlist.Prefs
createNewSketchInPlaceBuilder(Sketch) - Method in interface nxopen.SketchCollection
Creates a
SketchInPlaceBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
Created in NX7.5.0
License requirements: routing_harness ("Routing Harness")
.
createNewSubNode(int) - Method in interface nxopen.tooling.ManufacturingGeometryBuilder
Create a new sub node.
createNodalFunctionEvaluationSettingBuilder(NodalFunctionEvaluationSetting) - Method in interface nxopen.cae.responsesimulation.EvaluationSettingManager
Creates nodal function evaluation setting object
License requirements: nx_response_anlys ("NX Response Analysis")
.
createNode(String) - Method in interface nxopen.blockstyler.Tree
Creates the node but does not insert it.
createNode() - Method in interface nxopen.geometricutilities.MultiTransitionLawBuilder
Creates a new law node
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
createNodeAlignBuilder() - Method in interface nxopen.cae.NodeElementManager
Creates a builder for node align command
License requirements: nx_masterfem ("Finite Element Modeling")
.
createNodeAssociationBuilder() - Method in interface nxopen.cae.NodeElementManager
Creates a builder for node association command
License requirements: nx_masterfem ("Finite Element Modeling")
.
createNodeCreateBuilder() - Method in interface nxopen.cae.NodeElementManager
Creates a builder for node create command
License requirements: nx_masterfem ("Finite Element Modeling")
.
createNodeDeleteBuilder() - Method in interface nxopen.cae.NodeElementManager
Creates a builder for node delete command
License requirements: nx_masterfem ("Finite Element Modeling")
.
createNodeDissociationBuilder() - Method in interface nxopen.cae.NodeElementManager
Creates a builder for node dissociation command
License requirements: nx_masterfem ("Finite Element Modeling")
.
createNodeElementInfoBuilder() - Method in interface nxopen.cae.NodeElementInfoManager
Creates a builder for node element info command
License requirements: nx_masterfem ("Finite Element Modeling")
.
createNodeModifyLabelBuilder() - Method in interface nxopen.cae.NodeElementManager
Creates a builder for node modify label command
License requirements: nx_masterfem ("Finite Element Modeling")
.
createNodeModifyLocationBuilder() - Method in interface nxopen.cae.NodeElementManager
Creates a builder for node modify location command
License requirements: nx_masterfem ("Finite Element Modeling")
.
createNodePoints() - Method in interface nxopen.features.RapidSurfaceBuilder
Creates points to record every mesh node
License requirements: studio_free_form ("STUDIO FREE FORM")
.
createNodeProjectBuilder() - Method in interface nxopen.cae.NodeElementManager
Creates a builder for node project command
License requirements: nx_masterfem ("Finite Element Modeling")
.
createNodeReflectBuilder() - Method in interface nxopen.cae.NodeElementManager
Creates a builder for Node reflect command
License requirements: nx_masterfem ("Finite Element Modeling")
.
createNodeRotateBuilder() - Method in interface nxopen.cae.NodeElementManager
Creates a builder for node rotate command
License requirements: nx_masterfem ("Finite Element Modeling")
.
createNodesBetweenNodesBuilder() - Method in interface nxopen.cae.NodeElementManager
Creates a builder for node between nodes command
License requirements: nx_masterfem ("Finite Element Modeling")
.
createNodesOnCurveBuilder() - Method in interface nxopen.cae.NodeElementManager
Creates a builder for nodes on curve command
License requirements: nx_masterfem ("Finite Element Modeling")
.
createNodesRepositionBuilder() - Method in interface nxopen.cae.NodeElementManager
Creates a builder for repositioning nodes, Use this command when you need
to modify many nodes at one time.
createNodeTranslateBuilder() - Method in interface nxopen.cae.NodeElementManager
Creates a builder for node translate command
License requirements: nx_masterfem ("Finite Element Modeling")
.
createNonAssocHatch(int, double[], Tag, Tag, int, int) - Method in interface nxopen.uf.UFDrf
createNonAssociative() - Method in interface nxopen.die.OutputCurvesBuilder
Creates the output curve without a feature.
createNonmasterList() - Method in interface nxopen.pdm.PartFromPartBuilder
Initializes the list of non-master parts that can be saved during the
save as operation.
createNonMasterListForCopyLogicalObject(LogicalObject) - Method in interface nxopen.pdm.PartOperationCopyBuilder
Create NonMaster list for the selected logical Object
License requirements: None.
createNonMasterListForLogicalObject(LogicalObject) - Method in interface nxopen.pdm.PartOperationBuilder
createNonProportionalZoom() - Method in interface nxopen.ViewCollection
Creates a
NonProportionalZoom
License requirements: studio_analyze ("STUDIO ANALYZE")
Created in NX7.0.0
Creates a non-uniform scale constraint
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
createNonUniScale(Tag, int, String[]) - Method in interface nxopen.uf.UFModeling
createNormalConstraint(Sketch.ConstraintGeometry, Sketch.ConstraintGeometryHelp, Sketch.ConstraintGeometry, Sketch.ConstraintGeometryHelp) - Method in interface nxopen.Sketch
Creates a normal constraint.
createNormalCutoutFeatureBuilder(nxopen.features.Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
Create a NXSM Normal Cutout feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
createNormalToToolAxisMoveBuilder(Move) - Method in interface nxopen.cam.MoveCollection
Create a Move Normal to Tool Axis
License requirements: cam_base ("CAM BASE")
.
createNote(String[], Point3d, AxisOrientation, LetteringPreferences, UserSymbolPreferences) - Method in interface nxopen.annotations.AnnotationManager
Creates a note
License requirements: drafting ("DRAFTING")
.
createNote(int, String[], double[], int) - Method in interface nxopen.uf.UFDrf
createNote(Tag, double[]) - Method in interface nxopen.uf.UFPlist
createNSidedSurfaceBuilder(NSidedSurface) - Method in interface nxopen.features.FeatureCollection
Creates a
NSidedSurfaceBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
Created in NX6.0.0
Create the DxfdwgCreator
License requirements: None.
createObjectAttributeManagementBuilder() - Method in interface nxopen.tooling.ObjectAttributeManagementCollection
Creates object attribute management builder.
createObjectAttributeReferenceBuilder() - Method in interface nxopen.formboard.FormboardManager
createObjectBuilder() - Method in interface nxopen.assemblies.productinterface.Collection
Create Product Interface Object Builder
License requirements: None.
createObjectCreateBuilder(String[], String[]) - Method in interface nxopen.pdm.PdmSession
createObjectGeneralPropertiesBuilder(NXObject[]) - Method in interface nxopen.PropertiesManager
Create the ObjectGeneralPropertiesBuilder
License requirements: None.
createObjectList() - Method in interface nxopen.Part
Creates an empty list that can be populated with any NXObject
License requirements: None.
createObjectNotes(CAMObject) - Method in interface nxopen.cam.CAMSetup
Create Notes.
createObjectSinkBuilder(ObjectSink) - Method in interface nxopen.mechatronics.ObjectSinkCollection
createObjectSourceBuilder(ObjectSource) - Method in interface nxopen.mechatronics.ObjectSourceCollection
createObjectsUdeSet(CAMObject[], CAMSetup.Ude) - Method in interface nxopen.cam.CAMSetup
Create ObjectsUdeSet.
createObjectsUdeSet(CAMObject[], CAMSetup.Ude, CAMFeature[]) - Method in interface nxopen.cam.CAMSetup
Create ObjectsUdeSet for features
License requirements: cam_base ("CAM BASE")
.
createObjectsUdeSet(CAMObject[], CAMSetup.Ude) - Method in interface nxopen.cam.InspectionSetup
Create ObjectsUdeSet.
createObjectTransformerBuilder(ObjectTransformer) - Method in interface nxopen.mechatronics.ObjectTransformerCollection
createObjFromPsTag(Tag) - Method in interface nxopen.uf.UFPs
createOccurrenceBuilder(MeshCollectorOccurrence) - Method in interface nxopen.cae.MeshManagerOccurrence
Creates a mesh collector occurrence builder for the mesh collector occurrence overrides
License requirements: nx_masterfem ("Finite Element Modeling")
.
createOcfFeature(UFCurve.OcfData) - Method in interface nxopen.uf.UFCurve
createOffctrptCx(UFDrf.Object, double) - Method in interface nxopen.uf.UFDrf
createOffctrptCy(UFDrf.Object, double) - Method in interface nxopen.uf.UFDrf
createOffctrptFx(UFDrf.Object, UFDrf.Object) - Method in interface nxopen.uf.UFDrf
createOffctrptFy(UFDrf.Object, UFDrf.Object) - Method in interface nxopen.uf.UFDrf
createOffctrptNx(UFDrf.Object, double) - Method in interface nxopen.uf.UFDrf
createOffctrptNy(UFDrf.Object, double) - Method in interface nxopen.uf.UFDrf
createOffcylClineObj(UFDrf.Object, UFDrf.Object, UFDrf.Object) - Method in interface nxopen.uf.UFDrf
createOffcylClineOff(UFDrf.Object, UFDrf.Object, double) - Method in interface nxopen.uf.UFDrf
createOffset(Point3d, Vector3d, SmartObject.UpdateOption) - Method in interface nxopen.OffsetCollection
Create an
Offset without parameters.
Creates an
Offset using a Smart
nxopen.Direction and distance.
Creates a
Offset via an extract
Offset with optional transformation.
Creates a Features.Offset3DCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX10.0.0
createOffset3Scalars(Tag, UFSo.UpdateOption, Tag[]) - Method in interface nxopen.uf.UFSo
createOffsetCenterPointBuilder(OffsetCenterPoint) - Method in interface nxopen.annotations.OffsetCenterPointCollection
Creates the OffsetCenterPointBuilder
License requirements: drafting ("DRAFTING")
.
createOffsetCurve() - Method in interface nxopen.weld.WeldPointBuilder
Create offset curve
License requirements: ugweld ("UG WELD")
.
createOffsetCurve3dBuilder() - Method in interface nxopen.tooling.CAMDataManager
createOffsetCurveBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
Creates a
OffsetCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
Created in NX5.0.0
Creates a smart cylindrical
Offset .
Creates a
OffsetEdgeBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
Created in NX9.0.0
Creates a Offsetemboss builder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.
createOffsetExpressions() - Method in interface nxopen.features.shipdesign.SteelInsulationBoundaryBuilder
Create offset expressions for each boundary.
createOffsetExtract(Tag, UFSo.UpdateOption, Tag, Tag) - Method in interface nxopen.uf.UFSo
createOffsetFaceBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
Creates a
OffsetFaceBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX5.0.0
Creates a
OffsetMoveCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
Created in NX9.0.0
Create an
Offset using X, Y and Z deltas.
Creates an offset region builder, don't use it until nx502
License requirements: solid_modeling ("SOLIDS MODELING")
.
createOffsetSpherical(Scalar, Scalar, Scalar, SmartObject.UpdateOption) - Method in interface nxopen.OffsetCollection
Creates a smart spherical
Offset .
Creates an Offset Surface builder
License requirements: solid_modeling ("SOLIDS MODELING")
.
createOffsetSurfCvtr(Tag, UFSo.UpdateOption, UFSo.OffsetSurfCvtrData) - Method in interface nxopen.uf.UFSo
createOilPanBuilder(Feature) - Method in interface nxopen.features.AutomotiveCollection
createOilPanBuilder(OilPan) - Method in interface nxopen.features.VehicleDesignCollection
Creates a
OilPanBuilder
License requirements: nx_general_packaging ("NX General Packaging")
Created in NX9.0.0
Creates a builder for one dimensional element split command
License requirements: nx_masterfem ("Finite Element Modeling")
.
createOnestepBuilder(nxopen.features.Feature) - Method in interface nxopen.bodydes.OnestepUnformCollection
Creates an Onestep Unform builder.
createOnPathDimBuilder(Section, Point3d) - Method in interface nxopen.geometricutilities.AlignmentMethodBuilder
Set the sections.
createOnSurface(Tag, Tag, Tag) - Method in interface nxopen.uf.UFPoint
createOpcclientBuilder() - Method in interface nxopen.mechatronics.PhysicsManager
createOperationBuilder(PartOperationBuilder.OperationType) - Method in interface nxopen.pdm.PdmSession
createOperationTeaching(CAMObject) - Method in interface nxopen.cam.CAMSetup
Creates a CAM.OperationTeaching
License requirements: cam_base ("CAM BASE")
Created in NX8.0.0
createOperationTransformBuilder(CAMObject[]) - Method in interface nxopen.cam.CAMSetup
Create Transform builder.
createOpmessage(UFVariant, String) - Method in interface nxopen.uf.UFPath
createOpSkip(UFVariant, UFPath.OpSkip, String) - Method in interface nxopen.uf.UFPath
createOpStop(UFVariant, String) - Method in interface nxopen.uf.UFPath
createOptimizationAttributeBuilder() - Method in interface nxopen.optimization.OptimizationCollection
Create builder for OptimizationAttribute class
License requirements: None.
createOptimizationBuilder(DAOSolution) - Method in interface nxopen.cae.optimization.DAOSolutionCollection
Creates the builder object of optimization solution
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
createOptimizationBuilder() - Method in interface nxopen.optimization.OptimizationCollection
Create builder for optimization class
License requirements: None.
createOptimizeCurveBuilder() - Method in interface nxopen.features.FeatureCollection
Creates a
OptimizeCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX10.0.0
Creates a
OptimizeFaceBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
Created in NX7.0.0
Creates the builder object of model update optimize options
License requirements: nx_correl_update ("FE Model Update")
.
createOption() - Method in interface nxopen.cae.MeshPointMultipleOnCurveBuilder
Returns the create option
License requirements: None.
createOptionAttributeListEntry(boolean, boolean, boolean, String, int, int, String, String, String[]) - Method in interface nxopen.weld.CharacteristicsSelectionBuilder
createOptionAttributeListEntry(boolean, boolean, boolean, boolean, String, int, int, String, String, String[]) - Method in interface nxopen.weld.CharacteristicsSelectionBuilder
Create an option attribute list entry and add it to the list.
createOptionsBuilder() - Method in interface nxopen.cae.ModelUpdateSolution
Creates the builder object of model update options
License requirements: nx_correl_update ("FE Model Update")
.
createOrddimension(Tag, int, UFDrf.Object, double, double, UFDrf.Text, int, double[]) - Method in interface nxopen.uf.UFDrf
createOrdinateDim(Tag, int, Tag, int, int, double, double, String, int, String[], int, double[]) - Method in interface nxopen.uf.UFDrf
createOrdinateDimensionBuilder(OrdinateDimension) - Method in interface nxopen.annotations.DimensionCollection
createOrdinateMargin(int, Tag, Tag, double[], double[], double) - Method in interface nxopen.uf.UFDrf
createOrdinateOrigin(NXObject, Point3d) - Method in interface nxopen.tooling.AutoDimensionBuilder
The method to create ordinate origin
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
createOrdinateOrigin(Tag, int, int, int, int, int, String) - Method in interface nxopen.uf.UFDrf
createOrdinateOriginDimension(DimensionData, Point3d) - Method in interface nxopen.annotations.DimensionCollection
Creates an ordinate origin dimension
License requirements: drafting ("DRAFTING")
.
createOrdinateOriginMargins(NXObject, NXObject) - Method in interface nxopen.tooling.AutoDimensionBuilder
The method to create ordinate origin margins
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
createOrdmargin(int, Tag, UFDrf.Object, double[], double[], double) - Method in interface nxopen.uf.UFDrf
createOrdorigin(UFDrf.Object, int, int, int, String) - Method in interface nxopen.uf.UFDrf
createOrientationDefinitionBuilder(OrientationDefinition) - Method in interface nxopen.features.ShipCollection
createOrientBranchBuilder() - Method in interface nxopen.formboard.FormboardManager
createOrigin(UFVariant, double[], String) - Method in interface nxopen.uf.UFPath
createOrModifyAttribute() - Method in interface nxopen.pdm.PartOperationAttributePropertiesBuilder
Create the attribute from the data set in the builder.
createOrUpdateVio(Tag, Tag, String, String, int, Tag[]) - Method in interface nxopen.uf.UFRule
createOverallWeightsBuilder() - Method in interface nxopen.cae.ModelUpdateSolution
Creates the builder object of model update overall weights
License requirements: nx_correl_update ("FE Model Update")
.
createOvercrownFeatureBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
Creates a Overcrown feature builder
License requirements: solid_modeling ("SOLIDS MODELING")
.
createOverride(Tag, String, String, int) - Method in interface nxopen.uf.UFRule
createOverrideBuilder(Override) - Method in interface nxopen.validate.ResultObject
Creates a
OverrideBuilder
License requirements: ug_checkmate ("UG Check Mate")
Created in NX8.5.0
Represents a builder class that creates empty override part in the specified design elements.
createOverridePartBuilder(Part) - Method in interface nxopen.CollaborativeContentManager
createOverstockApplication(ControlPoint, ISegment[], Stock[], CharacteristicList, WrapApplicationType, Expression) - Method in interface nxopen.routing.OverstockApplicationCollection
Creates the Routing.Method#ENTIRE_SEGMENTS
overstock.
createOverstockApplication(ControlPoint, ISegment[], Stock[], Expression, Expression, Expression, Expression, Expression, Point, CharacteristicList, WrapApplicationType, Expression) - Method in interface nxopen.routing.OverstockApplicationCollection
createOverstockApplication(ControlPoint, ISegment[], Stock[], Point, Point, CharacteristicList, WrapApplicationType, Expression) - Method in interface nxopen.routing.OverstockApplicationCollection
createOverstockApplication(ControlPoint, ISegment[], Stock[], Point, PointDefinition, Expression, CharacteristicList, WrapApplicationType, Expression) - Method in interface nxopen.routing.OverstockApplicationCollection
Creates the Routing.Method#POINT_AND_LENGTH
overstock by the Point and Length method.
createOverstockBuilder(Overstock) - Method in interface nxopen.routing.RouteManager
createOverstockFacesBuilder() - Method in interface nxopen.routing.RouteManager
Creates a
OverstockFacesBuilder to qualify faces
of fittings for overstock application
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
Created in NX7.5.0
Creates a paired
InfiniteLine that is paired to the specified line.
Creates a
ParallelBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
Created in NX6.0.0
Creates a parallel constraint.
createParallelDim(UFDrf.Object, UFDrf.Object, UFDrf.Text, double[]) - Method in interface nxopen.uf.UFDrf
createParallelDimension(DimensionData, Point3d) - Method in interface nxopen.annotations.DimensionCollection
Creates a parallel dimension
License requirements: drafting ("DRAFTING")
.
createParametricBlank(Tag, UFParam.TurnWorkpieceType, UFParam.TurnWorkpieceDirection, Tag, double, double, double) - Method in interface nxopen.uf.UFTurn
createParasolidImporter() - Method in interface nxopen.ImportManager
Creates a Parasolid importer object.
createParser(String) - Method in interface nxopen.validate.ValidationManager
Creates a parser.
createPartCreationObject() - Method in interface nxopen.pdm.PartBuilder
Create an instance of a
PartCreationObject
class that acts as a proxy for a part in NX Manager mode prior to that part
being created.
Creates a part family associated with the owning part
License requirements: solid_modeling ("SOLIDS MODELING")
.
createPartIdentificationBuilder(PartIdentification) - Method in interface nxopen.annotations.PmiAttributeCollection
createPartImporter() - Method in interface nxopen.ImportManager
Creates a part importer object.
createPartingLinesToggle() - Method in interface nxopen.tooling.MWDefineRegionsBuilder
Returns the create parting lines toggle
License requirements: None.
createPartition() - Method in interface nxopen.uf.UFPs
createPartitionSearchTerm(SearchTerm.SearchTermLogicType, Partition) - Method in interface nxopen.assemblies.SubsetRecipe
Creates a
PartitionSearchTerm and
adds it to the recipe at the end of the list of search terms.
Creates a
PartModuleBuilder
License requirements: usr_defined_features ("USER DEFINED FEATURES")
Created in NX8.0.0
Creates part module input builder
License requirements: usr_defined_features ("USER DEFINED FEATURES")
.
createPartModuleOutputBuilder() - Method in interface nxopen.features.PartModule
createPartModuleOutputBuilder1() - Method in interface nxopen.features.PartModule
Creates new part module output builder
License requirements: usr_defined_features ("USER DEFINED FEATURES")
.
createPartModuleRelationshipBuilder(PartModule) - Method in interface nxopen.features.FeatureCollection
createPartOperationAttributePropertiesBuilder(NXObject[]) - Method in interface nxopen.pdm.PdmSession
createPartOperationValidationPropertiesBuilder(NXObject[]) - Method in interface nxopen.pdm.PdmSession
createPartSpec(String, String, String, String, String) - Method in interface nxopen.pdm.PartBuilder
Create the specification for the new part that will be created.
createPartSymbolFolderBuilder(PartSymbolFolder) - Method in interface nxopen.annotations.PartSymbolFolderCollection
Creates part symbol folder builder instance
License requirements: None.
createPassenger(BaseDataPassengerBuilder) - Method in interface nxopen.features.vehicledesign.BaseDataBuilder
createPasteBuilder() - Method in interface nxopen.ClipboardOperationsManager
Creates a Paste builder object.
createPasteBuilder() - Method in interface nxopen.tooling.ReusableObjectManager
Creates a ReusableObjectPasteBuilder
License requirements: None.
createPasteFaceBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
Creates a paste face builder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
.
createPasteSpecialBuilder() - Method in interface nxopen.ClipboardOperationsManager
Creates a Paste Special builder object.
createPatchBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
Creates a
PatchBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX5.0.0
Creates path curves for use by the orientation definition object
License requirements: None.
createPathConstraintJointBuilder(PathConstraintJoint) - Method in interface nxopen.mechatronics.PathConstraintJointCollection
createPathCurve(NXObject[]) - Method in interface nxopen.features.shipdesign.OrientationDefinitionBuilder
Sets the landing curve that is being processed into the builder.
createPathCurves() - Method in interface nxopen.features.shipdesign.ProfileSystemBuilder
Creates path curves for all the paths of the profile system.
CreatePathData() - Constructor for class nxopen.features.shipdesign.StiffenerBuilder.CreatePathData
createPathFromElemIds(int, String, int[]) - Method in interface nxopen.cae.Post
Create a path from an ordered set of element ids on the input postview id.
createPathFromNodeIds(int, String, int[]) - Method in interface nxopen.cae.Post
Create a path from an ordered set of node ids on the input postview id.
createPathFromOpening() - Method in interface nxopen.features.PatchOpeningsBuilder
Create a closed curve (path) from the currently selected opening.
CreatePathFromOpeningData() - Constructor for class nxopen.features.PatchOpeningsBuilder.CreatePathFromOpeningData
createPathFromPoints(int, String, double[], int) - Method in interface nxopen.cae.Post
Create a path from an ordered set of points on the input postview id.
createPathLengthAnnotationBuilder(nxopen.annotations.Annotation) - Method in interface nxopen.formboard.FormboardManager
Creates a nxopen.formboard.PathLengthAnnotationBuilder
License requirements: routing_harness ("Routing Harness")
Created in NX7.5.0
createPathObjects() - Method in interface nxopen.fields.FieldManager
createPaths() - Method in interface nxopen.cam.InspectionCreatePathsBuilder
Creates paths for the selected features.
createPathsEnum() - Method in interface nxopen.cam.InspectionLinkPmiBuilder
Returns the create paths enum
License requirements: None.
createPathStockBuilder() - Method in interface nxopen.routing.RouteManager
Creates a path stock builder.
createPatternFaceBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
Creates a pattern face builder, don't use it until nx502
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
.
createPatternFaceFeatureBuilder(PatternFaceFeature) - Method in interface nxopen.features.FeatureCollection
Creates a nxopen.features.PatternFaceFeatureBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
Created in NX9.0.0
createPatternFeatureBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
Creates nxopen.features.PatternFeatureBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX7.0.0
createPatternGeometryBuilder(PatternGeometry) - Method in interface nxopen.features.FeatureCollection
createPatternIncrementItem() - Method in interface nxopen.geometricutilities.PatternIncrementsList
createPatternIncrementItem(Expression) - Method in interface nxopen.geometricutilities.PatternIncrementsList
createPatternInstanceEditBuilder() - Method in interface nxopen.geometricutilities.PatternDefinition
createPatternSpacingsListItem() - Method in interface nxopen.geometricutilities.PatternSpacingsList
createPeakValueEvaluationSettingBuilder(PeakValueEvaluationSetting) - Method in interface nxopen.cae.responsesimulation.EvaluationSettingManager
Creates peak value evaluation setting object
License requirements: nx_response_anlys ("NX Response Analysis")
.
createPedestrianProtectionBuilder(Feature) - Method in interface nxopen.features.AutomotiveCollection
createPedestrianProtectionBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
createPedestrianProtectionBuilder(PedestrianProtection) - Method in interface nxopen.features.VehicleDesignCollection
createPenetrationAssociationBuilder(boolean, PenetrationRequest) - Method in interface nxopen.features.shipdesign.PenetrationRequestCollection
createPenetrationAttachment(PenetrationSite) - Method in interface nxopen.features.shipdesign.PenetrationUtils
Creates a
PenetrationAttachment
License requirements: nx_penetration_mgmt ("Penetration Management")
Created in NX8.0.0
Creates a
PenetrationCutoutBuilder
License requirements: nx_penetration_mgmt ("Penetration Management")
Created in NX8.0.0
Creates a
PenetrationFolder
License requirements: nx_penetration_mgmt ("Penetration Management")
Created in NX8.0.0
Creates a
PenetrationList
License requirements: nx_penetration_mgmt ("Penetration Management")
Created in NX8.0.0
Creates a
PenetrationSite
License requirements: nx_penetration_mgmt ("Penetration Management")
Created in NX8.0.0
Creates a perimeter dimension constraint
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
createPerpendicularBuilder(Perpendicular) - Method in interface nxopen.features.FeatureCollection
Creates a
PerpendicularBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
Created in NX6.0.0
Creates a perpendicular constraint.
createPerpendicularDim(UFDrf.Object, UFDrf.Object, UFDrf.Text, double[]) - Method in interface nxopen.uf.UFDrf
createPerpendicularDimension(DimensionData, Point3d) - Method in interface nxopen.annotations.DimensionCollection
Creates a perpendicular dimension
License requirements: drafting ("DRAFTING")
.
createPerspectiveOptionsBuilder() - Method in interface nxopen.BasePart
Creates a builder for the Perspective Options dialog
License requirements: None.
createPhysicalMaterialBuilder(PhysicalMaterial.Type) - Method in interface nxopen.PhysicalMaterialCollection
Creates a PhysMat.PhysicalMaterialBuilder used to create a physical materials of a given type
License requirements: None.
createPhysicalMaterialEditBuilder(PhysicalMaterial) - Method in interface nxopen.PhysicalMaterialCollection
Creates a PhysMat.PhysicalMaterialBuilder used to edit physical materials.
createPhysicalMaterialInspectBuilder(PhysicalMaterial) - Method in interface nxopen.PhysicalMaterialCollection
Creates a PhysMat.PhysicalMaterialBuilder used to inspect physical materials.
createPhysicsConversionBuilder(NXObject) - Method in interface nxopen.motion.MotionSession
createPiercingInsertBuilder() - Method in interface nxopen.tooling.PiercingInsertCollection
Creates create piercing insert builder
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
createPillarBuilder(Pillar) - Method in interface nxopen.features.ShipCollection
Creates a
PillarBuilder
License requirements: nx_ship_detail ("Ship Detail Design")
Created in NX8.0.0
Creates a
PinJigBuilder
License requirements: nx_ship_mfg_prep ("Ship Manufacturing")
Created in NX10.0.0
Creates a new pivot set
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
createPlacementSolutionsBuilder() - Method in interface nxopen.routing.RouteManager
Creates a placement solutions builder used to position a part that has been placed in the assembly.
createPlacePartBuilder(String, int, Point3d, TaggedObject) - Method in interface nxopen.routing.RouteManager
Creates a
PlacePartBuilder that is used to place
a routing part into an assembly.
Creates a
PlacePartBuilder that is used to place
a routing part into an assembly.
Creates a
PlacePartBuilder that is used to place
a routing part into an assembly.
Creates a planar milling planar operation builder
License requirements: cam_base ("CAM BASE")
.
createPlanarSegment(String, int) - Method in interface nxopen.features.sheetmetal.FlexibleCableBuilder
Creates a new Features.SheetMetal.FlexibleCableSegment planar segment.
createPlanarShipGridBuilder(PlanarShipGrid) - Method in interface nxopen.display.GridCollection
createPlane(Point3d, Vector3d, SmartObject.UpdateOption) - Method in interface nxopen.PlaneCollection
Creates an
Plane without parameters.
Creates an
Plane using a datum plane feature.
Creates an
Plane using a datum plane feature.
Returns the option to control if a reference datum plane should be output with the this feature.
createPlaneForList() - Method in interface nxopen.features.shipdesign.FeatureParmsBuilder
createPlaneGridBuilder(PlaneGrid) - Method in interface nxopen.display.GridCollection
createPlanePairBuilder() - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
createPlaneSearchTerm(SearchTerm.SearchTermLogicType, PlaneSearchTerm.PlaneOverlapLogicType, Vector3d, double, Point3d, boolean) - Method in interface nxopen.assemblies.SubsetRecipe
Creates a
PlaneSearchTerm and
adds it to the recipe at the end of the list of search terms.
Creates a
PlantInputBuilder
License requirements: nx_motion_cosim ("NX Motion CoSimulation")
Created in NX6.0.0
Creates a
PlantOutputBuilder
License requirements: nx_motion_cosim ("NX Motion CoSimulation")
Created in NX6.0.0
Creates a
PlateChamferBuilder
License requirements: nx_ship_detail ("Ship Detail Design")
Created in NX8.0.0
Creates a
PlatePreparationBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
Created in NX8.0.0
Creates a
PlateSystemBuilder
License requirements: nx_ship_basic ("Ship Basic Design")
Created in NX8.0.0
Creates a
PlatformCreatorBuilder which creates accessways platform
License requirements: routing_platform ("Routing Platform")
Created in NX8.5.0
Creates an Platform builder.
createPlotBuilder() - Method in interface nxopen.PlotManager
Create the PlotBuilder
License requirements: None.
createPlotObject() - Method in interface nxopen.cae.SimBcPlotContoursBuilder
Returns
NxBcPlotContours object
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX8.5.0
Returns
ThicknessPlotContours object
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX8.5.0
Creates a planar milling plunge operation builder
License requirements: cam_base ("CAM BASE")
.
createPmdcMotorBuilder(PMDCMotor) - Method in interface nxopen.motion.PMDCMotorCollection
Return
PMDCMotorBuilder object
License requirements: nx_motion_motor ("NX Motion Motor")
Created in NX6.0.0
Creates a PMI arc length dimension
License requirements: geometric_tol ("GDT")
.
createPmiAttributeBuilder(PmiAttribute) - Method in interface nxopen.annotations.PmiAttributeCollection
createPmiAttributeValueIntegerBuilder(PmiAttributeValueInteger) - Method in interface nxopen.annotations.PmiAttributeCollection
createPmiAttributeValueListBuilder(PmiAttributeValueList) - Method in interface nxopen.annotations.PmiAttributeCollection
createPmiAttributeValueMultipleStringBuilder(PmiAttributeValueMultipleString) - Method in interface nxopen.annotations.PmiAttributeCollection
Creates a nxopen.annotations.PmiAttributeValueMultipleStringBuilder
License requirements: None.
createPmiAttributeValueNumberBuilder(PmiAttributeValueNumber) - Method in interface nxopen.annotations.PmiAttributeCollection
createPmiAttributeValueStringBuilder(PmiAttributeValueString) - Method in interface nxopen.annotations.PmiAttributeCollection
Creates a nxopen.annotations.PmiAttributeValueStringBuilder
License requirements: None.
createPmiAttributeValueUrlBuilder(PmiAttributeValueUrl) - Method in interface nxopen.annotations.PmiAttributeCollection
createPmiCenterline3dBuilder(PmiCenterline3d) - Method in interface nxopen.annotations.CenterlineCollection
Creates the Pmi 3D Centerline builder
License requirements: None.
createPmiCenterMarkBuilder(PmiCenterMark) - Method in interface nxopen.annotations.CenterlineCollection
Creates the Pmi CenterMark Builder
License requirements: None.
createPmiChamferDimension(DimensionData, PmiData, Xform, Point3d) - Method in interface nxopen.annotations.DimensionCollection
Creates a PMI chamfer dimnension
License requirements: geometric_tol ("GDT")
.
createPmiChamferDimensionBuilder(PmiChamferDimension) - Method in interface nxopen.annotations.DimensionCollection
createPmiConcentricCircleDimension(DimensionData, PmiData, Xform, Point3d) - Method in interface nxopen.annotations.DimensionCollection
Creates a PMI concentric circle dimension
License requirements: geometric_tol ("GDT")
.
createPmiCurveLengthDimensionBuilder(PmiArcLengthDimension) - Method in interface nxopen.annotations.DimensionCollection
createPmiCustomSymbol(CustomSymbolData, PmiData, Xform, Point3d, LeaderBundle) - Method in interface nxopen.annotations.CustomSymbolCollection
createPmiCustomSymbolBuilder(PmiCustomSymbol) - Method in interface nxopen.annotations.CustomSymbolCollection
Creates the PMI Symbol Placement builder
License requirements: None.
createPmiCylindricalDimension(DimensionData, PmiData, Xform, Point3d) - Method in interface nxopen.annotations.DimensionCollection
Creates a PMI cylindrical dimension
License requirements: geometric_tol ("GDT")
.
createPmiDatumFeatureSymbolBuilder(Datum) - Method in interface nxopen.annotations.GdtDatumCollection
createPmiDatumTargetBuilder(DatumTarget) - Method in interface nxopen.annotations.AnnotationManager
createPmiDiameterDimension(DimensionData, PmiData, Xform, Point3d) - Method in interface nxopen.annotations.DimensionCollection
Creates a PMI diameter dimension
License requirements: geometric_tol ("GDT")
.
createPmiFeatureControlFrameBuilder(Fcf) - Method in interface nxopen.annotations.AnnotationManager
createPmiFoldedRadiusDimension(DimensionData, PmiData, Xform, Point3d) - Method in interface nxopen.annotations.DimensionCollection
Creates a PMI folded radius dimension
License requirements: geometric_tol ("GDT")
.
createPmiHoleDimension(DimensionData, PmiData, Xform, Point3d) - Method in interface nxopen.annotations.DimensionCollection
Creates a PMI hole dimension
License requirements: geometric_tol ("GDT")
.
createPmiHorizontalBaselineDimension(DimensionData, PmiData[], Xform, Point3d) - Method in interface nxopen.annotations.DimensionSetCollection
Creates a PMI horizontal baseline dimension.
createPmiHorizontalChainDimension(DimensionData, PmiData[], Xform, Point3d) - Method in interface nxopen.annotations.DimensionSetCollection
Creates a PMI horizontal chain dimension.
createPmiHorizontalDimension(DimensionData, PmiData, Xform, Point3d) - Method in interface nxopen.annotations.DimensionCollection
Creates a PMI horizontal dimension
License requirements: geometric_tol ("GDT")
.
createPmiHorizontalOrdinateAutoDimension(DimensionData, PmiData, Xform, Point3d, boolean, boolean) - Method in interface nxopen.annotations.DimensionCollection
Creates a PMI horizontal ordinate automatic dimension
License requirements: geometric_tol ("GDT")
.
createPmiHorizontalOrdinateDimension(DimensionData, PmiData, Xform, Point3d) - Method in interface nxopen.annotations.DimensionCollection
Creates a PMI horizontal ordinate dimension
License requirements: geometric_tol ("GDT")
.
createPmiIntegerBuilder(PmiInteger) - Method in interface nxopen.annotations.PmiAttributeCollection
createPmiLabel(LabelData, PmiData, Xform, Point3d, LeaderBundle) - Method in interface nxopen.annotations.LabelCollection
Creates a PMI label
License requirements: geometric_tol ("GDT")
.
createPmiLinearDimensionBuilder(Dimension) - Method in interface nxopen.annotations.DimensionCollection
createPmiLineWeld(LineWeldData, PmiData, Xform, Point3d, LeaderBundle) - Method in interface nxopen.annotations.WeldCollection
Creates a PMI line weld.
createPmiLineWeldBuilder(PmiLineWeld) - Method in interface nxopen.annotations.WeldCollection
Creates a
PmiLineWeldBuilder
License requirements: geometric_tol ("GDT")
Created in NX6.0.0
Creates a PMI major angular dimension
License requirements: geometric_tol ("GDT")
.
createPmiMajorAngularDimensionBuilder(BaseAngularDimension) - Method in interface nxopen.annotations.DimensionCollection
createPmiMinorAngularDimension(DimensionData, PmiData, Xform, Point3d) - Method in interface nxopen.annotations.DimensionCollection
Creates a PMI minor angular dimension
License requirements: geometric_tol ("GDT")
.
createPmiMinorAngularDimensionBuilder(BaseAngularDimension) - Method in interface nxopen.annotations.DimensionCollection
createPmiNote(NoteData, PmiData, Xform, Point3d) - Method in interface nxopen.annotations.NoteCollection
Creates a PMI note
License requirements: geometric_tol ("GDT")
.
createPmiNoteBuilder(SimpleDraftingAid) - Method in interface nxopen.annotations.AnnotationManager
createPmiNumberBuilder(PmiNumber) - Method in interface nxopen.annotations.PmiAttributeCollection
createPmiOrdinateDimensionBuilder(OrdinateDimension) - Method in interface nxopen.annotations.DimensionCollection
createPmiOrdinateOriginDimension(DimensionData, PmiData, Xform, Point3d) - Method in interface nxopen.annotations.DimensionCollection
Creates a PMI ordinate origin dimension
License requirements: geometric_tol ("GDT")
.
createPmiParallelDimension(DimensionData, PmiData, Xform, Point3d) - Method in interface nxopen.annotations.DimensionCollection
Creates a PMI parallel dimension
License requirements: geometric_tol ("GDT")
.
createPmiPerpendicularDimension(DimensionData, PmiData, Xform, Point3d) - Method in interface nxopen.annotations.DimensionCollection
Creates a PMI perpendicular dimension
License requirements: geometric_tol ("GDT")
.
createPmiRadialDimensionBuilder(Dimension) - Method in interface nxopen.annotations.DimensionCollection
createPmiRadiusDimension(DimensionData, RadiusDimensionType, PmiData, Xform, Point3d) - Method in interface nxopen.annotations.DimensionCollection
Creates a PMI radius dimension
License requirements: geometric_tol ("GDT")
.
createPmiRapidDimensionBuilder(Dimension) - Method in interface nxopen.annotations.DimensionCollection
createPmiStringBuilder(PmiString) - Method in interface nxopen.annotations.PmiAttributeCollection
Creates a nxopen.annotations.PmiStringBuilder
License requirements: None.
createPmiThicknessDimensionBuilder(PmiConcentricCircleDimension) - Method in interface nxopen.annotations.DimensionCollection
createPmiTrackingPropertiesBuilder() - Method in interface nxopen.annotations.AnnotationManager
createPmiUrlNoteBuilder(PmiUrlNote) - Method in interface nxopen.annotations.PmiAttributeCollection
createPmiUserDefinedBuilder(PmiUserDefined) - Method in interface nxopen.annotations.PmiAttributeCollection
createPmiVerticalBaselineDimension(DimensionData, PmiData[], Xform, Point3d) - Method in interface nxopen.annotations.DimensionSetCollection
Creates a PMI vertical baseline dimension.
createPmiVerticalChainDimension(DimensionData, PmiData[], Xform, Point3d) - Method in interface nxopen.annotations.DimensionSetCollection
Creates a PMI vertical chain dimension.
createPmiVerticalDimension(DimensionData, PmiData, Xform, Point3d) - Method in interface nxopen.annotations.DimensionCollection
Creates a PMI vertical dimension
License requirements: geometric_tol ("GDT")
.
createPmiVerticalOrdinateAutoDimension(DimensionData, PmiData, Xform, Point3d, boolean, boolean) - Method in interface nxopen.annotations.DimensionCollection
Creates a PMI vertical ordinate automatic dimension
License requirements: geometric_tol ("GDT")
.
createPmiVerticalOrdinateDimension(DimensionData, PmiData, Xform, Point3d) - Method in interface nxopen.annotations.DimensionCollection
Creates a PMI vertical ordinate dimension
License requirements: geometric_tol ("GDT")
.
createPmiWaveLinkBuilder(Annotation) - Method in interface nxopen.annotations.PmiWaveCollection
Creates a
PmiWaveLinkBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX8.0.0
Creates pocket.
createPocketBuilder() - Method in interface nxopen.tooling.PocketCollection
Creates pocket object
License requirements: None.
createPoint(Point3d) - Method in interface nxopen.PointCollection
Creates a
Point without parameters.
Creates a
Point on the intersection of two
Curve and/or
Edge in a View.
Creates a
Point on a
Curve or
Edge and
Scalar representing
the Percent parameter or Arc Length or Percent Arc Length.
Creates a
Point at the intersection of two Edges or Curves.
Creates a
Point at the apparent intersection of two Edges or Curves in a view.
Creates a
Point at the center of a spherical face.
Creates a
Point between two points using a
Scalar that represents
a percentage of the distance between the points.
Creates a point by projecting onto a face.
createPoint(ScCollector, IBaseCurve, Point, Point, SmartObject.UpdateOption) - Method in interface nxopen.PointCollection
Creates a
Point at the intersection of a
connected set of faces and
IBaseCurve .
Creates a
Point on a
nxopen.annotations.Annotation and
Scalar representing the T parameter.
Creates a
Point at the center of a splarc.
Returns the option to control if a reference point should be output with this feature.
createPoint3Scalars(Tag, UFSo.UpdateOption, Tag[]) - Method in interface nxopen.uf.UFSo
createPoint3ScalarsCsys(Tag, Tag, Tag[], UFSo.UpdateOption) - Method in interface nxopen.uf.UFSo
createPointAlongCurve(Tag, UFSo.UpdateOption, Tag, Tag, Tag, UFSo.PointAlongCurveOption, boolean) - Method in interface nxopen.uf.UFSo
createPointByCoordinates() - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder
Creates a standard point.
createPointConicCenter(Tag, UFSo.UpdateOption, Tag) - Method in interface nxopen.uf.UFSo
createPointDirrDaxis(Tag, Tag) - Method in interface nxopen.uf.UFModlFeatures
createPointDirrDplane(Tag, Tag) - Method in interface nxopen.uf.UFModlFeatures
createPointExtract(Tag, UFSo.UpdateOption, Tag, Tag) - Method in interface nxopen.uf.UFSo
createPointExtractWithDispMarker(Tag, UFSo.UpdateOption, Tag, Tag, UFDisp.PolyMarker) - Method in interface nxopen.uf.UFSo
createPointFeatureBuilder(Feature) - Method in interface nxopen.features.BaseFeatureCollection
Creates a nxopen.features.PointFeatureBuilder
License requirements: None.
createPointMarkBuilder(PointMark) - Method in interface nxopen.weld.WeldManager
createPointOffset(Tag, UFSo.UpdateOption, Tag, Tag) - Method in interface nxopen.uf.UFSo
createPointOnArcAngle(Tag, UFSo.UpdateOption, Tag, Tag, Tag) - Method in interface nxopen.uf.UFSo
createPointOnAxis(Tag, UFSo.UpdateOption, Tag, Tag) - Method in interface nxopen.uf.UFSo
createPointOnCurve(Tag, UFSo.UpdateOption, Tag, Tag) - Method in interface nxopen.uf.UFSo
createPointOnCurveBuilder(PointOnCurve) - Method in interface nxopen.motion.PointOnCurveCollection
Creates a
PointOnCurveBuilder
License requirements: mechanisms ("MECHANISMS")
Created in NX6.0.0
Creates a point on curve constraint.
createPointOnCurveJointBuilder(PointOnCurveJoint) - Method in interface nxopen.mechatronics.PointOnCurveJointCollection
createPointOnPortExtractAlign(SmartObject.UpdateOption, nxopen.routing.Port, Scalar) - Method in interface nxopen.PointCollection
Creates a
Point at a
nxopen.routing.Port .
Creates a
Point on the center of gravity of the sketch for a given sheet metal feature face
in history free mode.
Creates a point on string constraint.
createPointOnStringConstraint(Sketch.ConstraintGeometry, Curve, Sketch.ConstraintGeometryHelp) - Method in interface nxopen.Sketch
Creates a point on string constraint.
createPointOnSurface(Tag, UFSo.UpdateOption, Tag, Tag, Tag) - Method in interface nxopen.uf.UFSo
createPointOnSurfaceAxis(TaggedObject, Scalar, SmartObject.UpdateOption) - Method in interface nxopen.PointCollection
Creates a parameterised point on the center line axis of the given face.
createPointOnSurfaceBuilder(PointOnSurface) - Method in interface nxopen.motion.PointOnSurfaceCollection
createPointOnSurfaceConstraint(UFMotion.PointOnSurfaceData) - Method in interface nxopen.uf.UFMotion
createPointPairBuilder() - Method in interface nxopen.features.shipdesign.PillarBuilder
createPointPairBuilder() - Method in interface nxopen.features.shipdesign.PillarSystemBuilder
createPoints() - Method in interface nxopen.geometricanalysis.CurveAnalysisInflectionsBuilder
createPoints() - Method in interface nxopen.geometricanalysis.CurveAnalysisPeaksBuilder
createpoints - Variable in class nxopen.routing.SubdivideSegmentBuilder.SplineSettingsData
Add points to the new segments to maintain shape after subdivision.
createpoints - Variable in class nxopen.routing.SubdivideSegmentBuilder.SplineSettingValuesData
Add points to the new segments to maintain shape after subdivision.
createPointSetAlignmentBuilder() - Method in interface nxopen.Part
Creates point set alignment builder object
License requirements: studio_free_form ("STUDIO FREE FORM")
.
createPointSetBuilder(PointSet) - Method in interface nxopen.features.FeatureCollection
Creates a
PointSetBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX6.0.0
Creates a
Point draft smart point for splines as arcs
License requirements: drafting ("DRAFTING")
.
Creates a
Point at a spline pole.
Creates a PMI point target
License requirements: geometric_tol ("GDT")
.
createPointTarget(DatumTargetData, Point3d, LeaderBundle) - Method in interface nxopen.annotations.DatumTargetCollection
Creates a drafting point target
License requirements: drafting ("DRAFTING")
.
createPointToPointBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
Creates a point to point operation builder
License requirements: cam_base ("CAM BASE")
.
createPointTwoCurves(Tag, UFSo.UpdateOption, Tag, Tag, Tag, Tag) - Method in interface nxopen.uf.UFSo
createPolesGroup() - Method in interface nxopen.geometricutilities.ControlPoleManagerData
Creates a new poles group
License requirements: studio_free_form ("STUDIO FREE FORM")
.
createPoleSmoothingBuilder(PoleSmoothing) - Method in interface nxopen.features.FeatureCollection
Creates a
PoleSmoothingBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX6.0.0
CREATE POLYGON BODY on excluded ug tag
License requirements: nx_masterfem ("Finite Element Modeling")
.
createPolygonFaceOnMeshBuilder() - Method in interface nxopen.cae.AbstractionManager
Creates a builder for Polygon Face On Mesh Command
License requirements: nx_masterfem ("Finite Element Modeling")
.
createPolyline(Point2d[]) - Method in interface nxopen.markup.MarkupFileObjectCollection
Creates a nxopen.Markup.Polyline
License requirements: None.
createPolylineBuilder(Polyline) - Method in interface nxopen.features.FreeformCurveCollection
Creates a polyline builder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
.
createPortAtSegend(Tag, int, boolean) - Method in interface nxopen.uf.UFRoute
createPortFromAxis(Tag) - Method in interface nxopen.uf.UFRoute
createPortFromCsys(boolean, boolean, Tag) - Method in interface nxopen.uf.UFRoute
createPortLock(Tag, boolean) - Method in interface nxopen.uf.UFRoute
createPositionControlBuilder(PositionControl) - Method in interface nxopen.mechatronics.PositionControlCollection
createPositioningDimension() - Method in interface nxopen.features.RPOBuilder
Creates a positioning dimension.
createPositioningGroupBuilder(Part, nxopen.assemblies.PositioningGroup) - Method in interface nxopen.CollaborativeContentManager
Creates a nxopen.assemblies.PositioningGroupBuilder
License requirements: nx_4gd_integration ("4th Generation Design")
Created in NX10.0.0
createPositioningTaskBuilder(PositioningTask) - Method in interface nxopen.assemblies.SubsetCollection
Creates a
PositioningTaskBuilder
License requirements: nx_4gd_integration ("4th Generation Design")
Created in NX10.0.0
Creates a builder for exporting a component or result type JT
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
createPostview(int, int, boolean) - Method in interface nxopen.cae.Post
Create a new post view with default settings on a loaded result id.
createPostview(int, Result, boolean) - Method in interface nxopen.cae.Post
Create a new post view with default settings on a loaded result id.
createPostview(int, ResultParametersWithProbe, boolean) - Method in interface nxopen.cae.Post
Create a new post view for a given probe.
createPostviewForResult(int, int, boolean, Result.ResultParameters) - Method in interface nxopen.cae.Post
createPostviewForResult(int, Result, boolean, ResultParameters) - Method in interface nxopen.cae.Post
Create a new post view with specified result on a loaded result id.
createPostviewsForResultAndSE(int, Result, ResultParameters) - Method in interface nxopen.cae.Post
Create a new post view with specified result on a loaded result id.
createPower(UFVariant, double, String) - Method in interface nxopen.uf.UFPath
createPprint(UFVariant, String) - Method in interface nxopen.uf.UFPath
createPrebendBuilder(Prebend) - Method in interface nxopen.features.ToolingCollection
Creates a
PrebendBuilder
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
Created in NX10.0.0
Creates a
PreferencesBuilder
License requirements: drafting ("DRAFTING")
Created in NX9.0.0
Creates a preprocess geometry builder
License requirements: cam_base ("CAM BASE")
.
createPretestBuilder(PreTestSolution) - Method in interface nxopen.cae.PreTestSolutionCollection
Creates a pre-test dialog builder
License requirements: nx_correl_base ("FE Correlation")
.
createPretestDofsetBuilder(PreTestDofSet) - Method in interface nxopen.cae.PreTestSolutionCollection
Creates a dof set dialog builder
License requirements: nx_correl_base ("FE Correlation")
.
createPreventCollisionBuilder(PreventCollision) - Method in interface nxopen.mechatronics.PreventCollisionCollection
createPreview() - Method in interface nxopen.features.ChamferBuilder
Creates the chamfer preview body
License requirements: solid_modeling ("SOLIDS MODELING")
.
createPreviewPropertiesBuilder(NXObject[]) - Method in interface nxopen.PropertiesManager
Create the PreviewPropertiesBuilder
License requirements: None.
createPreviewSurface() - Method in interface nxopen.tooling.EnlargeSurfaceBuilder
Create preview surface data from builder.
createPrimaryContentItemBuilder() - Method in interface nxopen.drafting.AutomationManager
createPrimitiveMeshBuilder(Mesh) - Method in interface nxopen.cae.MeshManager
Creates a builder for editing an existng primitive mesh.
createPrimitiveMeshBuilder(String) - Method in interface nxopen.cae.MeshManager
Creates a builder for creating a primitive mesh of the specified type.
createPrintBuilder() - Method in interface nxopen.PlotManager
Create the PrintBuilder
License requirements: None.
createPrintPdfbuilder() - Method in interface nxopen.PlotManager
Create the PrintPDFBuilder
License requirements: None.
createProbeCalibrateLengthMoveBuilder(Move) - Method in interface nxopen.cam.MoveCollection
Create a Probe Calibrate Length Move.
createProbeCalibrateSphereMoveBuilder(Move) - Method in interface nxopen.cam.MoveCollection
Create a Probe Calibrate on Sphere Move.
createProbeCalibrateStylusMoveBuilder(Move) - Method in interface nxopen.cam.MoveCollection
Create a Probe Calibrate Stylus Move.
createProbeClearanceMoveBuilder(Move) - Method in interface nxopen.cam.MoveCollection
Create a Probe Clearance Plane Change.
createProbeInspectBorebossMoveBuilder(Move) - Method in interface nxopen.cam.MoveCollection
Create a Probe Inspect Bore-Boss Move.
createProbeInspectPointMoveBuilder(Move) - Method in interface nxopen.cam.MoveCollection
Create a Probe Inspect Point Move.
createProbeInspectSurfacePointMoveBuilder(Move) - Method in interface nxopen.cam.MoveCollection
Create a Probe Inspect Surface Point Move.
createProbeTrackingBuilder(ProbeTrackPoint) - Method in interface nxopen.cam.InspectionTool
Creates a Probe Trackpoint builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
createProbeTrackingBuilder(ProbeTrackPoint) - Method in interface nxopen.cam.Tool
Creates a Probe Trackpoint builder
License requirements: cam_base ("CAM BASE")
.
createProcessSpecificationBuilder(ProcessSpecification) - Method in interface nxopen.annotations.PmiAttributeCollection
createProductBoundingBox() - Method in interface nxopen.geometricutilities.LocalUntrimBuilder
Creates the product initial bounding box.
createProductDefinition(UFPd.ProductDefinition) - Method in interface nxopen.uf.UFPd
createProductOutlineBuilder() - Method in interface nxopen.assemblies.ProductOutlineManager
createProeImporter() - Method in interface nxopen.DexManager
Create the ProE Importer
License requirements: None.
createProfileBuilder(Feature) - Method in interface nxopen.features.ShipCollection
Creates a
ProfileBuilder
License requirements: nx_ship_concept ("Ship Concept")
Created in NX7.5.0
Creates a
ProfileCutoutBuilder
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
Created in NX8.0.0
Creates a
ProfileListBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
Created in NX5.0.0
Creates profile split builder
License requirements: None.
createProfileSystemBuilder(ProfileSystem) - Method in interface nxopen.features.ShipCollection
createProfileTransitionBuilder(ProfileTransition) - Method in interface nxopen.features.ShipCollection
createProjCurves(int, Tag[], int, Tag[], int, UFCurve.Proj) - Method in interface nxopen.uf.UFCurve
createProjCurves(Tag[], Tag[], int, double[]) - Method in interface nxopen.uf.UFModlGeneral
createProjCurves1(int, Tag[], int, Tag[], int, UFCurve.Proj1) - Method in interface nxopen.uf.UFCurve
createProject(CloneObject) - Method in interface nxopen.tooling.ElectrodeInitializationBuilder
Creates the assembly structure of Electrode Wizard project.
createProjectBuilder(nxopen.features.Feature) - Method in interface nxopen.SketchCollection
Creates a
SketchProjectBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
Created in NX5.0.0
Creates electrode initialization builder
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
createProjectCurveBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
Creates a
ProjectCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
Created in NX5.0.0
Lets you add a projected view (Orthoraphic View) for the selected parent view.
createProjectedView(DraftingView, Point3d, nxopen.Direction) - Method in interface nxopen.drawings.SheetDraftingViewCollection
Lets you add a projected view (A View) for the selected parent view.
createProjectedViewBuilder(ProjectedView) - Method in interface nxopen.drawings.DraftingViewCollection
Creates the Projected View Builder
License requirements: drafting ("DRAFTING")
.
createProjectNodesToCadGeometryBuilder() - Method in interface nxopen.cae.MeshManager
Creates a project nodes to cad geometry builder
License requirements: nx_masterfem ("Finite Element Modeling")
.
createPromotion(Tag) - Method in interface nxopen.uf.UFModlGeneral
createPromotionBuilder(Promotion) - Method in interface nxopen.features.FeatureCollection
Creates a
PromotionBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX6.0.0
Create Product Interface Property Builder
License requirements: None.
createProximitySearchTerm(SearchTerm.SearchTermLogicType, SearchResultElement[], double, boolean) - Method in interface nxopen.assemblies.SubsetRecipe
Creates a
ProximitySearchTerm and
adds it to the recipe at the end of the list of search terms.
Creates a
PublishComponentBuilder that can export local definitions into external storage locations
License requirements: nx_layout ("NX Layout")
Created in NX10.0.0
Creates a
PullFaceBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
Created in NX6.0.0
Creates a quadrant point
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR nx_masterfem ("Finite Element Modeling") OR geometric_tol ("GDT")
.
createQualifySketchBuilder() - Method in interface nxopen.features.ShipCollection
Creates a
QualifySketchBuilder
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
Created in NX8.0.0
Creates the Query PMI builder
License requirements: geometric_tol ("GDT")
.
createQueryResultsView() - Method in interface nxopen.annotations.QueryPmiBuilder
Returns the create query results view
License requirements: None.
createQueryView(Annotation[]) - Method in interface nxopen.annotations.AnnotationManager
Creates a model view displaying the given PMI symbols.
createQuickBinderBuilder(QuickBinder) - Method in interface nxopen.die.DieCollection
Creates a
QuickBinderBuilder
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
Created in NX7.5.0
Creates a
SketchQuickExtendBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
Created in NX5.0.0
Creates a Quick Path builder.
createQuickQuotationBuilder() - Method in interface nxopen.tooling.QuickQuotationCollection
createQuickTrimBuilder() - Method in interface nxopen.SketchCollection
Creates a
SketchQuickTrimBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
Created in NX5.0.0
Creates a radial dimension constraint
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
createRadialDimension(Sketch.DimensionGeometry, Point3d, Expression, Sketch.DimensionOption) - Method in interface nxopen.Sketch
Creates a radial dimension constraint.
createRadialDimensionBuilder(Dimension) - Method in interface nxopen.annotations.DimensionCollection
createRadialDimensionBuilder(RadialDimension) - Method in interface nxopen.features.FeatureCollection
Creates a
RadialDimensionBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
Created in NX6.0.0
Creates a radius dimension
License requirements: drafting ("DRAFTING")
.
createRadiusDimension(boolean) - Method in interface nxopen.SketchPolygonBuilder
The flag to indicate if we need to create radius dimension
License requirements: None.
createRandomEventBuilder(DurabilityRandomEvent) - Method in interface nxopen.cae.DurabilityEventCollection
Creates the builder object of the durability random event.
createRandomEventBuilder(LaminateRandomEvent) - Method in interface nxopen.cae.LaminateDynamicEventCollection
Creates a builder for the laminate random event.
createRandomfatigueBuilder(DurabilityRandomFatigue) - Method in interface nxopen.cae.DurabilityRandomFatigueCollection
Creates the builder object of durability event fatigue settings.
createRapidDimensionBuilder(Dimension) - Method in interface nxopen.annotations.DimensionCollection
createRapidDimensionBuilder() - Method in interface nxopen.SketchCollection
Creates a
SketchRapidDimensionBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
Created in NX9.0.0
Creates a Rapid Surfacing feature builder
License requirements: studio_free_form ("STUDIO FREE FORM")
.
createRasterImage(Point3d, Matrix3x3, double, double, String, double, RasterImage.MaxTextureSize) - Method in interface nxopen.features.FeatureCollection
Creates a raster image
License requirements: studio_visualize ("STUDIO VISUALIZE")
.
createRasterImageBuilder(RasterImage) - Method in interface nxopen.display.ImageCollection
createRayTracedStudioBuilder() - Method in interface nxopen.ViewCollection
createRayTracedStudioEditorBuilder() - Method in interface nxopen.ViewCollection
createRcpArcCenter(Tag) - Method in interface nxopen.uf.UFRoute
createRcpAtPort(Tag, boolean) - Method in interface nxopen.uf.UFRoute
CreateRcpAtPortData() - Constructor for class nxopen.uf.UFRoute.CreateRcpAtPortData
createRcpByWcsOff(Tag, double[], boolean) - Method in interface nxopen.uf.UFRoute
CreateRcpByWcsOffData() - Constructor for class nxopen.uf.UFRoute.CreateRcpByWcsOffData
createRcpByWorkPos(double[], boolean) - Method in interface nxopen.uf.UFRoute
CreateRcpByWorkPosData() - Constructor for class nxopen.uf.UFRoute.CreateRcpByWorkPosData
createRcpCurveParm(Tag, double) - Method in interface nxopen.uf.UFRoute
createRcpOnRcp(Tag, boolean) - Method in interface nxopen.uf.UFRoute
CreateRcpOnRcpData() - Constructor for class nxopen.uf.UFRoute.CreateRcpOnRcpData
createRcpPoint(Tag) - Method in interface nxopen.uf.UFRoute
createRcpPosition(double[]) - Method in interface nxopen.uf.UFRoute
createReachZone() - Method in interface nxopen.features.Human
Create a new
HumanReachZone for human feature
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
Created in NX4.0.0
Creates an empty real matrix record which section data is real data.
createReassignElementsBuilder() - Method in interface nxopen.cae.MeshManager
Creates a builder for element transfer to collector command
License requirements: nx_masterfem ("Finite Element Modeling")
.
createRebaseBuilder() - Method in interface nxopen.features.ShipCollection
Creates a
RebaseBuilder
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
Created in NX8.0.0
Create a NXSM Rebend feature builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
createReblendFace(UFModl.ReblendFaceData) - Method in interface nxopen.uf.UFModlFeatures
createRecord(XyFunctionMacroType, XyFunctionGeneralType, AfuData) - Method in interface nxopen.cae.AfuManager
Create a new AFU Data Record.
createRecord(AfuData) - Method in interface nxopen.cae.AfuManager
Create a new AFU Data Record.
createRectangle(Point2d, double, double) - Method in interface nxopen.markup.MarkupFileObjectCollection
Creates a nxopen.Markup.Rectangle
License requirements: None.
createRectangularOffsetPath(ISegment[], boolean, Stock[], boolean, boolean, OffsetPathCollection.BendType, boolean, double, double, boolean, boolean, Vector3d, Vector3d, Point3d, double, double, double, int, int, int, int) - Method in interface nxopen.routing.OffsetPathCollection
Creates a rectangular offset path.
CreateRectangularOffsetPathData() - Constructor for class nxopen.routing.OffsetPathCollection.CreateRectangularOffsetPathData
createRectangularPatternFace(UFModl.DfoRegion, Tag, Tag, int, int, String, String) - Method in interface nxopen.uf.UFModlFeatures
createRectangularTarget(RectangularTargetData, PmiData, Xform, Point3d, LeaderBundle) - Method in interface nxopen.annotations.DatumTargetCollection
Creates a PMI rectangular target
License requirements: geometric_tol ("GDT")
.
createRectGroove(double[], double[], String, String, Tag) - Method in interface nxopen.uf.UFModlFeatures
createRectPad(double[], double[], double[], String[], String, String, Tag) - Method in interface nxopen.uf.UFModlFeatures
createRectPocket(double[], double[], double[], String[], String, String, String, Tag) - Method in interface nxopen.uf.UFModlFeatures
createRectSlot(double[], double[], double[], String, String, String, Tag, Tag, Tag) - Method in interface nxopen.uf.UFModl
createReduceSurfaceRadiusBuilder() - Method in interface nxopen.geometricutilities.CAMDataPrepManager
createReduceSurfaceRadiusFaceGroupBuilder() - Method in interface nxopen.geometricutilities.CAMDataPrepManager
Creates a nxopen.geometricutilities.ReduceSurfaceRadiusFaceGroupBuilder
License requirements: None.
createReferenceBlend() - Method in interface nxopen.tooling.ReferenceBlendBuilder
Create reference blend
License requirements: None.
createReferenceBlendBuilder() - Method in interface nxopen.tooling.ReferenceBlendCollection
createReferenceData() - Method in interface nxopen.weld.JointmarkBuilder
Create a temporary overlap or top sheet and guide curve.
createReferenceLineBuilder(Feature) - Method in interface nxopen.features.ShipCollection
Creates a
ReferenceLineBuilder
License requirements: nx_ship_concept ("Ship Concept")
Created in NX5.0.0
Returns the setting to indicate if the reference lines should be created,
true they will be created, false they will not be created.
createReferenceMapperBuilder(FeatureBuilder) - Method in interface nxopen.features.FeatureCollection
createReferenceResult(SimResultReference) - Method in interface nxopen.cae.ResultManager
Creates a reference result object given a
SimResultReference
It is user's responsibility to destroy the result object once done
using
ResultManager.deleteResult(nxopen.cae.Result) , in order to free up system resources
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX10.0.0
Creates a RefitFaceBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
.
createRefitFaceFeature(UFModl.RefitFaceData) - Method in interface nxopen.uf.UFModlFeatures
createReflection(View, boolean) - Method in interface nxopen.ViewCollection
createReflectionDataBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
createReflectionDataBuilder(ReflectionData) - Method in interface nxopen.features.VehicleDesignCollection
Creates a
ReflectionDataBuilder
License requirements: nx_general_packaging ("NX General Packaging")
Created in NX9.0.0
Create reform builder
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
createRefSet(String, double[], double[], Tag[], int) - Method in interface nxopen.uf.UFAssem
createRegionBody() - Method in interface nxopen.features.shipdesign.PlateSystemBuilder
Create the region body that has the inscribed boundaries.
createRegionBuilder(Region) - Method in interface nxopen.annotations.PmiRegionCollection
createRegionPoint(Point, Body) - Method in interface nxopen.Part
Creates an item that contains a point and its corresponding body context for a region
License requirements: None.
createRegions() - Method in interface nxopen.cam.CutRegionsBuilder
Create regions method
License requirements: None.
createRegions() - Method in interface nxopen.features.shipdesign.PlateBuilder
Creates regions to output the selected plates.
createRegionsAtFrames() - Method in interface nxopen.features.shipdesign.OrientationDefinitionBuilder
Will create new regions at each frame.
createRegionSewnSheet(String) - Method in interface nxopen.tooling.MWDefineSheetsBuilder
Create sewn sheet for the region
License requirements: None.
createRegionsOption() - Method in interface nxopen.cam.SurfaceRegions
Returns the create regions type
License requirements: None.
createRegionsPreview(Face, Curve[]) - Method in interface nxopen.geometricutilities.SnipIntoPatchesBuilder
Create region preview
License requirements: None.
createRegionsToggle() - Method in interface nxopen.tooling.MWDefineRegionsBuilder
Returns the create regions toggle
License requirements: None.
createRelabelPliesBuilder() - Method in interface nxopen.cae.LaminateGlobalLayupMgr
createRelatedElemEdgeMethod(Mesh) - Method in interface nxopen.cae.SmartSelectionManager
Creates a related elem edge method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createRelatedElemEdgeMethod(Mesh[]) - Method in interface nxopen.cae.SmartSelectionManager
Creates a related elem edge method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createRelatedElemEdgeMethod(CAEEdge) - Method in interface nxopen.cae.SmartSelectionManager
Creates a related elem edge method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createRelatedElemEdgeMethod(CAEEdge[]) - Method in interface nxopen.cae.SmartSelectionManager
Creates a related elem edge method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createRelatedElemFaceMethod(Mesh) - Method in interface nxopen.cae.SmartSelectionManager
Creates a related elem face method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createRelatedElemFaceMethod(Mesh[]) - Method in interface nxopen.cae.SmartSelectionManager
Creates a related elem face method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createRelatedElemFaceMethod(CAEFace) - Method in interface nxopen.cae.SmartSelectionManager
Creates a related elem face method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createRelatedElemFaceMethod(CAEFace[]) - Method in interface nxopen.cae.SmartSelectionManager
Creates a related elem face method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createRelatedElemMethod(Mesh) - Method in interface nxopen.cae.SmartSelectionManager
Creates a related elem method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createRelatedElemMethod(Mesh[]) - Method in interface nxopen.cae.SmartSelectionManager
Creates a related elem method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createRelatedElemMethod(CAEBody) - Method in interface nxopen.cae.SmartSelectionManager
Creates a related elem method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createRelatedElemMethod(CAEBody[]) - Method in interface nxopen.cae.SmartSelectionManager
Creates a related elem method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createRelatedElemMethod(CAEFace) - Method in interface nxopen.cae.SmartSelectionManager
Creates a related elem method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createRelatedElemMethod(CAEFace[]) - Method in interface nxopen.cae.SmartSelectionManager
Creates a related elem method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createRelatedElemMethod(CAEEdge) - Method in interface nxopen.cae.SmartSelectionManager
Creates a related elem method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createRelatedElemMethod(CAEEdge[]) - Method in interface nxopen.cae.SmartSelectionManager
Creates a related elem method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createRelatedElemMethod(FENode) - Method in interface nxopen.cae.SmartSelectionManager
Creates a related elem method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createRelatedElemMethod(FENode[]) - Method in interface nxopen.cae.SmartSelectionManager
Creates a related elem method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createRelatedFaceMethod(Mesh) - Method in interface nxopen.cae.SmartSelectionManager
Creates a related face method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createRelatedFaceMethod(Mesh[]) - Method in interface nxopen.cae.SmartSelectionManager
Creates a related face method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createRelatedFaceMethod(FENode) - Method in interface nxopen.cae.SmartSelectionManager
Creates a related face method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createRelatedFaceMethod(FENode[]) - Method in interface nxopen.cae.SmartSelectionManager
Creates a related face method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createRelatedFaceMethod(FEElement, int) - Method in interface nxopen.cae.SmartSelectionManager
createRelatedFaceMethod(FEElement[], int[]) - Method in interface nxopen.cae.SmartSelectionManager
createRelatedNodeMethod(Mesh) - Method in interface nxopen.cae.SmartSelectionManager
Creates a related node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createRelatedNodeMethod(Mesh[]) - Method in interface nxopen.cae.SmartSelectionManager
Creates a related node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createRelatedNodeMethod(CAEBody) - Method in interface nxopen.cae.SmartSelectionManager
Creates a related node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createRelatedNodeMethod(CAEBody[]) - Method in interface nxopen.cae.SmartSelectionManager
Creates a related node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createRelatedNodeMethod(CAEFace) - Method in interface nxopen.cae.SmartSelectionManager
Creates a related node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createRelatedNodeMethod(CAEFace[]) - Method in interface nxopen.cae.SmartSelectionManager
Creates a related node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createRelatedNodeMethod(CAEEdge) - Method in interface nxopen.cae.SmartSelectionManager
Creates a related node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createRelatedNodeMethod(CAEEdge[]) - Method in interface nxopen.cae.SmartSelectionManager
Creates a related node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createRelatedNodeMethod(FEElement) - Method in interface nxopen.cae.SmartSelectionManager
Creates a related node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createRelatedNodeMethod(FEElement[]) - Method in interface nxopen.cae.SmartSelectionManager
Creates a related node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createRelatedNodeMethod(MeshPoint[]) - Method in interface nxopen.cae.SmartSelectionManager
Creates a related node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createRelatedNodeMethod(Point[]) - Method in interface nxopen.cae.SmartSelectionManager
Creates a related node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createRelatedNodeMethod(Line[]) - Method in interface nxopen.cae.SmartSelectionManager
Creates a related node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createRelatedNodeMethod(Arc[]) - Method in interface nxopen.cae.SmartSelectionManager
Creates a related node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createRelatedNodeMethod(Conic[]) - Method in interface nxopen.cae.SmartSelectionManager
Creates a related node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createRelatedNodeMethod(Spline[]) - Method in interface nxopen.cae.SmartSelectionManager
Creates a related node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createRelativeDaxis(int, Tag[], int[]) - Method in interface nxopen.uf.UFModlFeatures
createRelativeDplane(int, Tag[], int[], int, double[], String, String) - Method in interface nxopen.uf.UFModlFeatures
CreateRelativeDplaneData() - Constructor for class nxopen.uf.UFModlFeatures.CreateRelativeDplaneData
createReliefDesignBuilder() - Method in interface nxopen.tooling.ReliefDesignCollection
Creates Relief Design builder.
createRemoveDiscontinuityBuilder(NXObject[]) - Method in interface nxopen.routing.RouteManager
Creates a
RemoveDiscontinuityBuilder which removes
selected discontinuity corners
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
Created in NX7.5.0
Creates Remove Holes builder.
createRemoveObjectsBuilder() - Method in interface nxopen.drawings.DrawingRegionCollection
Creates remove objects builder
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
createRemoveParametersBuilder() - Method in interface nxopen.features.FeatureCollection
createRemoveSplitBuilder() - Method in interface nxopen.features.ShipCollection
Creates a
RemoveSplitBuilder
License requirements: nx_ship_detail ("Ship Detail Design")
Created in NX8.0.0
Creates a
ReorderBlendsBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
Created in NX7.5.1
Creates a
ReplaceBlendBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
Created in NX7.0.0
Creates a
ReplaceComponentBuilder that can replace the selected 2D Component
instance with another 2D Component definition
License requirements: nx_layout ("NX Layout")
Created in NX10.0.0
Replace expressions.
createReplaceFace(Tag[], int, Tag[], int, Tag, boolean) - Method in interface nxopen.uf.UFModlFeatures
createReplaceFaceBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
Creates a replace face builder, don't use it until nx502
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
.
createReplaceFeatureBuilder() - Method in interface nxopen.features.FeatureCollection
Creates a nxopen.features.ReplaceFeatureBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX6.0.0
createReplacePhysicsBuilder() - Method in interface nxopen.mechatronics.PhysicsManager
createReplaceSolidBuilder() - Method in interface nxopen.tooling.ReplaceSolidCollection
Creates a
ReplaceSolidBuilder
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
Created in NX8.0.0
Create builder for Requirement class
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
createRequirementBuilder(Requirement) - Method in interface nxopen.validate.RequirementCollection
createRequirementCheck() - Method in interface nxopen.validate.RequirementCheckCollection
Create a requirement check
License requirements: None.
createResizeBendAngleBuilder(nxopen.features.Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
Creates Resize Bend Angle Builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
createResizeBendRadiusFeatureBuilder(nxopen.features.Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
Create a Resize Bend Radius Builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
createResizeBlendBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
Creates a resize blend builder, don't use it until nx502
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
.
createResizeChamferBuilder(ResizeChamfer) - Method in interface nxopen.features.FeatureCollection
Creates a
ResizeChamferBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
Created in NX7.0.0
Creates a
ResizeChamferCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
Created in NX10.0.0
Creates a
ResizeCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
Created in NX9.0.0
Creates a resize face builder, don't use it until nx502
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.
createResizeNeutralFactorBuilder(nxopen.features.Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
Creates Resize Neutral Factor Builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
createResizePlaneBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
Creates a Resize Datum Plane feature builder
License requirements: solid_modeling ("SOLIDS MODELING")
.
createResponseConstraintBuilder(TBSConstraint) - Method in interface nxopen.cae.optimization.TBSOptimizationManager
Creates the builder of
TBSConstraint
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
Created in NX8.0.0
Creates a solution result object given a
RSEvent
It is user's responsibility to destroy the result object once done
using
ResultManager.deleteResult(nxopen.cae.Result) , in order to free up system resources
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX7.5.0
Creates response results evaluation setting object
License requirements: nx_response_anlys ("NX Response Analysis")
.
createResponseSolutionResult(Solution) - Method in interface nxopen.cae.ResultManager
Creates a solution result object given a
Solution
It is user's responsibility to destroy the result object once done
using
ResultManager.deleteResult(nxopen.cae.Result) , in order to free up system resources
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX6.0.2
Creates a result access object
It is user's responsibility to destroy the result access object once done
using
ResultManager.deleteResultAccess(nxopen.cae.ResultAccess) , in order to free up system resources
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX6.0.2
Creates a result access object based on an existing Post View
It is user's responsibility to destroy the result access object once done
using
ResultManager.deleteResultAccess(nxopen.cae.ResultAccess) , in order to free up system resources
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX8.5.2
Creates a result access reference field object.
createResultMeasure(SimSolution, int, int, Result.Type, Result.Component, String) - Method in interface nxopen.cae.ResultMeasureCollection
createResultMeasureNew(ResultMeasureResultOptions, ResultMeasureModelSubset, String) - Method in interface nxopen.cae.ResultMeasureCollection
Create a ResultMeasure
License requirements: nx_masterfem ("Finite Element Modeling")
.
createResultOptions(SimSolution, int, int, Result.Type, Result.Component) - Method in interface nxopen.cae.ResultMeasureCollection
createResultOptionsNew(SimSolution, SimResultReference, int, int, Result.Type, Result.Component) - Method in interface nxopen.cae.ResultMeasureCollection
Create a result options for result measure
License requirements: nx_masterfem ("Finite Element Modeling")
.
createResultParameters() - Method in interface nxopen.cae.ResultManager
Creates a result parameter object.
createResultParametersWithProbe(ResultProbe) - Method in interface nxopen.cae.ResultManager
Creates a result parameter object for given Result Probe.
createResultPathBuilder(DurabilityResultPath) - Method in interface nxopen.cae.DurabilityExcitationCollection
createResultProbeBuilder(ResultProbe) - Method in interface nxopen.cae.SimSolution
Creates the builder to create and edit Result Probe object
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
createResultsCombinationBuilder() - Method in interface nxopen.cae.ResultManager
Creates a results combination builder.
createResultsEnvelopeBuilder() - Method in interface nxopen.cae.ResultManager
Creates a results envelope builder.
createResultsModelExportBuilder() - Method in interface nxopen.cae.ResultManager
Creates a model export builder.
createResultsReductionBuilder() - Method in interface nxopen.cae.ResultManager
Creates a results reduction builder.
createResultvariable(SimSimulation, Result.Quantity, Result.Location, Result.Component, String, String) - Method in interface nxopen.cae.ResultManager
Creates Result Variable object
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
createReusableBuilder(int, int, FastenerAssy.StackTypeMethod) - Method in interface nxopen.tooling.FastenerAssy
Creates new reusable builder
License requirements: None.
createReusableConstraints(int) - Method in interface nxopen.tooling.AddReusablePart
Creates constraints for the reusable component
License requirements: None.
createReusableObject() - Method in interface nxopen.tooling.CaeReuseLibrary
createReusableObject() - Method in interface nxopen.tooling.ToolingManager
createReusablePocket(boolean) - Method in interface nxopen.tooling.AddReusablePart
Creates pocket for a reusable component
License requirements: None.
createReusablePocket(boolean) - Method in interface nxopen.tooling.FastenerAssy
Creates reusable pocket
License requirements: None.
createReusablePocketBuilder() - Method in interface nxopen.tooling.ReusablePocketCollection
Creates a ReusablePocket builder
License requirements: None.
createReverseNormal(Tag, int) - Method in interface nxopen.uf.UFModeling
createReverseShellElementNormalBuilder() - Method in interface nxopen.cae.ModelCheckManager
Provides access for creating reverse 2D element normal builders in a cae part
License requirements: nx_masterfem ("Finite Element Modeling")
.
createReverseSplitBuilder() - Method in interface nxopen.features.ShipCollection
createRevisionBusinessModifierBuilder(RevisionBusinessModifier) - Method in interface nxopen.annotations.BusinessModifierCollection
createRevisonBusinessModifier(String) - Method in interface nxopen.annotations.BusinessModifierCollection
createRevolution(Tag[], int, UFModl.SweepTrimObject, String[], String[], double[], boolean, boolean, double[], double[], UFModl.FeatureSigns) - Method in interface nxopen.uf.UFModl
createRevolution1(Tag[], int, UFModl.SweepTrimObject, String[], String[], double[], boolean, boolean, double[], double[], UFModl.FeatureSigns, Tag) - Method in interface nxopen.uf.UFModl
CreateRevolution1Data() - Constructor for class nxopen.uf.UFModl.CreateRevolution1Data
CreateRevolutionData() - Constructor for class nxopen.uf.UFModl.CreateRevolutionData
createRevolutionDir(Tag[], int, UFModl.SweepTrimObject, String[], String[], double[], boolean, boolean, Tag, UFModl.FeatureSigns) - Method in interface nxopen.uf.UFModl
CreateRevolutionDirData() - Constructor for class nxopen.uf.UFModl.CreateRevolutionDirData
createRevolveBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
Creates a Revolve builder
License requirements: solid_modeling ("SOLIDS MODELING")
.
createRevolved(Tag[], String[], double[], double[], UFModl.FeatureSigns) - Method in interface nxopen.uf.UFModl
createRevolved1(Tag[], String[], double[], double[], UFModl.FeatureSigns, Tag) - Method in interface nxopen.uf.UFModl
createRevolvedSxview(Tag, double, double[], double[], Tag, UFDrf.Object, int, int, UFDraw.SxlineSxsegs[], double[]) - Method in interface nxopen.uf.UFDraw
createRibbon(String, int) - Method in interface nxopen.uf.UFUi
createRibbonBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
Creates a ribbon builder
License requirements: solid_modeling ("SOLIDS MODELING")
.
createRibBuilder(Rib) - Method in interface nxopen.features.DesignFeatureCollection
Creates a
RibBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
Created in NX9.0.0
Creates RMS results evaluation setting object
License requirements: nx_response_anlys ("NX Response Analysis")
.
createRollingLineBuilder(RollingLine) - Method in interface nxopen.features.ShipCollection
Creates a
RollingLineBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
Created in NX8.0.0
Create a Rotary Move to Point.
createRotaryPolarMoveBuilder(Move) - Method in interface nxopen.cam.MoveCollection
Create a Rotary Polar Move.
createRotate(UFVariant, UFPath.Rotate, String) - Method in interface nxopen.uf.UFPath
createRotateToolMoveBuilder(Move, Move) - Method in interface nxopen.cam.MoveCollection
Create a Rotate Tool Move.
createRotationalDdamExcitationBuilder(DDAMExcitation) - Method in interface nxopen.cae.responsesimulation.ExcitationCollection
Creates the builder object of
DDAMExcitation
License requirements: nx_response_anlys ("NX Response Analysis")
Created in NX5.0.0
Creates a new rotation set
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
createRoughOffset(UFModl.RoughOffset) - Method in interface nxopen.uf.UFModlFeatures
createRoughTurningBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
Creates a rough turning operation builder
License requirements: cam_base ("CAM BASE")
.
createRoundCrossSection(Tag, int, double, String[]) - Method in interface nxopen.uf.UFRoute
createRouteSweptFoldBuilder(NXObject, NXObject) - Method in interface nxopen.routing.RouteManager
createRouteSweptTwistBuilder(NXObject) - Method in interface nxopen.routing.RouteManager
createRouting(String) - Method in interface nxopen.routing.RoutingSystemCollection
createRoutingMeasureDistanceBuilder(NXObject) - Method in interface nxopen.MeasureManager
createRoutingMeasureDistanceBuilder(NXObject, MeasureDistanceBuilder) - Method in interface nxopen.MeasureManager
createRoutingPlacePartBuilder(CharacteristicList, Point3d, TaggedObject) - Method in interface nxopen.routing.RouteManager
Creates a
PlacePartBuilder that is used to place
a routing part into an assembly.
Creates a Relative Positioning Object builder
License requirements: solid_modeling ("SOLIDS MODELING")
.
createRpoConstraints(Tag, Tag, Tag, Tag[], int[], Tag[], int[], String[], String[], int) - Method in interface nxopen.uf.UFModlUi
createRule(String, String, String, String, String) - Method in interface nxopen.uf.UFKf
createRule(Tag, String, String, String, Tag) - Method in interface nxopen.uf.UFRule
createRuleApparentChaining(ICurve, View, ApparentChainingRuleType, ApparentChainingRuleSelection, double, double) - Method in interface nxopen.ScRuleFactory
Creates selection intent rule:
ApparentChainingRule
License requirements: gateway ("UG GATEWAY")
Created in NX8.0.0
Creates selection intent rule:
CurveDumbRule
License requirements: gateway ("UG GATEWAY")
Created in NX8.5.0
Creates selection intent rule:
BodyDumbRule
License requirements: gateway ("UG GATEWAY")
Created in NX7.5.0
Creates selection intent rule:
BodyDumbRule with the option to include or exclude sheet bodies
License requirements: gateway ("UG GATEWAY")
Created in NX9.0.0
Creates selection intent rule:
BodyFeatureRule
License requirements: gateway ("UG GATEWAY")
.
Creates selection intent rule:
BodyFeatureRule with the option to include or exclude sheet bodies
License requirements: gateway ("UG GATEWAY")
.
Creates selection intent rule:
BodyFeatureRule for the given feature from a part occurrence.
Creates selection intent rule:
BodyFeatureRule for the given feature from a part occurrence, with the option to include or exclude sheet bodies
License requirements: gateway ("UG GATEWAY")
.
Creates selection intent rule:
BodyGroupRule
License requirements: gateway ("UG GATEWAY")
.
Creates selection intent rule:
BodyFeatureRule with the option to include or exclude sheet bodies
License requirements: gateway ("UG GATEWAY")
Created in NX9.0.0
Creates selection intent rule:
CurveChainRule
License requirements: None.
Creates selection intent rule:
CurveDumbRule
License requirements: gateway ("UG GATEWAY")
Created in NX3.0.0
Creates selection intent rule:
CurveDumbRule
License requirements: gateway ("UG GATEWAY")
Created in NX5.0.0
Creates selection intent rule:
CurveFeatureRule
License requirements: gateway ("UG GATEWAY")
Created in NX3.0.0
Creates selection intent rule:
CurveFeatureRule for the given feature from a part occurrence.
Creates selection intent rule:
CurveFeatureChainRule
License requirements: gateway ("UG GATEWAY")
Created in NX3.0.0
Creates selection intent rule:
CurveFeatureTangentRule
License requirements: gateway ("UG GATEWAY")
Created in NX3.0.0
Creates selection intent rule:
CurveGroupRule
License requirements: gateway ("UG GATEWAY")
Created in NX7.5.0
Creates a Ruled Surface builder
License requirements: solid_modeling ("SOLIDS MODELING")
.
createRuleEdgeBody(Body) - Method in interface nxopen.ScRuleFactory
Creates selection intent rule:
EdgeBodyRule
License requirements: gateway ("UG GATEWAY")
Created in NX3.0.0
Creates selection intent rule:
EdgeBoundaryRule
License requirements: gateway ("UG GATEWAY")
Created in NX3.0.0
Creates selection intent rule:
EdgeChainRule
License requirements: gateway ("UG GATEWAY")
Created in NX3.0.0
Creates selection intent rule:
EdgeChainRule
License requirements: gateway ("UG GATEWAY")
Created in NX7.5.0
Creates selection intent rule:
EdgeDumbRule
License requirements: gateway ("UG GATEWAY")
Created in NX3.0.0
Creates selection intent rule:
EdgeFaceRule
License requirements: gateway ("UG GATEWAY")
Created in NX3.0.0
Creates selection intent rule:
EdgeFeatureRule
License requirements: gateway ("UG GATEWAY")
Created in NX3.0.0
Creates selection intent rule:
EdgeFeatureRule for the given feature from a part occurrence.
Creates selection intent rule:
EdgeIntersectRule
License requirements: gateway ("UG GATEWAY")
Created in NX3.0.0
Creates selection intent rule:
EdgeFeatureRule
License requirements: gateway ("UG GATEWAY")
Created in NX3.0.0
Creates selection intent rule:
EdgeTangentRule
License requirements: gateway ("UG GATEWAY")
Created in NX3.0.0
Creates selection intent rule:
EdgeTangentRule
License requirements: gateway ("UG GATEWAY")
Created in NX7.5.0
Creates selection intent rule:
EdgeVertexRule
License requirements: gateway ("UG GATEWAY")
Created in NX4.0.0
Creates selection intent rule:
EdgeVertexTangentRule
License requirements: gateway ("UG GATEWAY")
Created in NX4.0.0
Creates selection intent rule:
FaceAdjacentRule
License requirements: gateway ("UG GATEWAY")
Created in NX4.0.0
Creates selection intent rule:
FaceAllBlendRule
License requirements: gateway ("UG GATEWAY")
Created in NX5.0.0
Creates selection intent rule:
FaceAllBlendRule
License requirements: gateway ("UG GATEWAY")
Created in NX8.5.0
Creates selection intent rule:
FaceBodyRule
License requirements: gateway ("UG GATEWAY")
Created in NX4.0.0
Creates selection intent rule:
FaceBossPocketFacesRule
License requirements: gateway ("UG GATEWAY")
Created in NX5.0.0
Creates selection intent rule:
FaceBossPocketFacesRule
License requirements: gateway ("UG GATEWAY")
Created in NX6.0.0
Creates selection intent rule:
FaceConnectedBlendRule
License requirements: gateway ("UG GATEWAY")
Created in NX5.0.0
Creates selection intent rule:
FaceConnectedBlendRule
License requirements: gateway ("UG GATEWAY")
Created in NX8.5.0
Creates selection intent rule:
FaceConnectedBlendRule
License requirements: gateway ("UG GATEWAY")
Created in NX10.0.0
Creates selection intent rule:
FaceDumbRule
License requirements: gateway ("UG GATEWAY")
Created in NX4.0.0
Creates selection intent rule:
FaceDumbRule
License requirements: gateway ("UG GATEWAY")
Created in NX4.0.0
Creates selection intent rule:
FaceFeatureRule
License requirements: gateway ("UG GATEWAY")
Created in NX4.0.0
Creates selection intent rule:
FaceFeatureRule for the given feature from a part occurrence.
Creates selection intent rule:
FaceMergedRibFacesRule
License requirements: gateway ("UG GATEWAY")
Created in NX6.0.0
Creates selection intent rule:
FaceMergedRibFacesRule
License requirements: gateway ("UG GATEWAY")
Created in NX6.0.0
Creates selection intent rule:
FaceMergedRibFacesRule
License requirements: gateway ("UG GATEWAY")
Created in NX8.0.0
Creates selection intent rule:
FaceRegionRule
License requirements: gateway ("UG GATEWAY")
Created in NX4.0.0
Creates selection intent rule:
FaceRegionBoundaryRule
License requirements: gateway ("UG GATEWAY")
Created in NX7.0.0
Creates selection intent rule:
FaceRegionRule where the boundaries also update with original intent
License requirements: gateway ("UG GATEWAY")
Created in NX4.0.0
Creates selection intent rule:
FaceRibFacesRule
License requirements: gateway ("UG GATEWAY")
Created in NX5.0.0
Creates selection intent rule:
FaceRibFacesRule
License requirements: gateway ("UG GATEWAY")
Created in NX6.0.0
Creates selection intent rule:
FaceSlotFacesRule
License requirements: gateway ("UG GATEWAY")
Created in NX5.0.0
Creates selection intent rule:
FaceSlotFacesRule
License requirements: gateway ("UG GATEWAY")
Created in NX6.0.0
Creates selection intent rule:
FaceTangentRule
License requirements: gateway ("UG GATEWAY")
Created in NX4.0.0
Creates selection intent rule:
FaceTangentRule with tangent tolerance
License requirements: gateway ("UG GATEWAY")
Created in NX8.0.0
Creates selection intent rule:
FaceTangentRule where the boundaries also update with original intent
License requirements: gateway ("UG GATEWAY")
Created in NX4.0.0
Creates selection intent rule:
FeaturePointsRule for the given feature from a part occurrence.
Creates selection intent rule:
FeaturePointsRule
License requirements: gateway ("UG GATEWAY")
Created in NX5.0.2
Creates selection intent rule:
FollowFilletRule
License requirements: gateway ("UG GATEWAY")
Created in NX4.0.0
Creates selection intent rule:
FollowFilletRule with stop at intersection option ON
License requirements: gateway ("UG GATEWAY")
Created in NX7.5.0
Creates selection intent rule:
OuterEdgesOfFacesRule
License requirements: gateway ("UG GATEWAY")
Created in NX8.5.0
Creates selection intent rule:
RegionBoundaryRule
License requirements: gateway ("UG GATEWAY")
Created in NX6.0.0
Creates selection intent rule:
RibTopFaceEdgesRule
License requirements: gateway ("UG GATEWAY")
Created in NX8.5.0
Creates a fully defined
Run object whose "From" item(s),
"To" item(s), and "Member" item(s) are assigned to components in the assembly.
Creates a
Run with items that are not assigned to components in the assembly.
Creates an empty
Run using just a unique Run identifier and a type.
Creates a RunItems used to create list item for DefineRun
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
createRunnerBuilder() - Method in interface nxopen.tooling.RunnerCollection
Creates a Runner builder
License requirements: None.
createRunSimulationBuilder() - Method in interface nxopen.tooling.ProgressiveDieManager
Creates Run Simulation builder.
createRuntimeBehaviorBuilder(RuntimeBehavior) - Method in interface nxopen.mechatronics.RuntimeBehaviorCollection
createRuntimeFormulaBuilder(RuntimeFormula) - Method in interface nxopen.mechatronics.RuntimeFormulaCollection
createRuntimeFormulaParameterBuilder(RuntimeFormulaParameter) - Method in interface nxopen.mechatronics.RuntimeFormulaCollection
createRuntimeNcBuilder(RuntimeNCObject) - Method in interface nxopen.mechatronics.RuntimeNCCollection
createSafetyClassBusinessModifier(String) - Method in interface nxopen.annotations.BusinessModifierCollection
createSafetyClassBusinessModifierBuilder(SafetyClassBusinessModifier) - Method in interface nxopen.annotations.BusinessModifierCollection
createSameAssemblyData(int, int) - Method in interface nxopen.tooling.FastenerAssy
Creates the same assembly data type
License requirements: None.
createSaveImageFileBrowserBuilder() - Method in interface nxopen.ViewCollection
createSbfFile(String) - Method in interface nxopen.uf.UFDrf
createScalar(double, Scalar.DimensionalityType, SmartObject.UpdateOption) - Method in interface nxopen.ScalarCollection
Creates a scalar without parameters.
createScalar(Scalar, Scalar, Scalar.DimensionalityType, SmartObject.UpdateOption) - Method in interface nxopen.ScalarCollection
Creates a scalar via an existing scalar and an optional scalar.
createScalarDist2Pnts(Tag, UFSo.UpdateOption, Tag[]) - Method in interface nxopen.uf.UFSo
createScalarDouble(Tag, UFSo.UpdateOption, double) - Method in interface nxopen.uf.UFSo
createScalarDoubleDim(Tag, UFSo.UpdateOption, double, UFSo.ScalarDimOption) - Method in interface nxopen.uf.UFSo
createScalarExp(Tag, UFSo.UpdateOption, Tag) - Method in interface nxopen.uf.UFSo
createScalarExpDim(Tag, UFSo.UpdateOption, Tag, UFSo.ScalarDimOption) - Method in interface nxopen.uf.UFSo
createScalarExpression(Expression, Scalar.DimensionalityType, SmartObject.UpdateOption) - Method in interface nxopen.ScalarCollection
Creates a scalar using an expression.
createScalarExtract(Tag, UFSo.UpdateOption, Tag, Tag) - Method in interface nxopen.uf.UFSo
createScalarExtractDim(Tag, UFSo.UpdateOption, Tag, Tag, UFSo.ScalarDimOption) - Method in interface nxopen.uf.UFSo
createScalarFieldWrapperWithExpression(Expression) - Method in interface nxopen.fields.FieldManager
Create a field wrapper backed by a scalar expression
License requirements: None.
createScalarFieldWrapperWithField(Field, double) - Method in interface nxopen.fields.FieldManager
Create a scalar field wrapper backed up by a scaled scalar field
License requirements: None.
createScalarForce(UFMotion.ScalarForceTorque) - Method in interface nxopen.uf.UFMotion
createScalarForceBuilder(ScalarForce) - Method in interface nxopen.motion.ScalarForceCollection
Return
ScalarForceBuilder object
License requirements: mechanisms ("MECHANISMS")
Created in NX6.0.0
Creates a scalar whose value is a reciprocal of another scalar
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
createScalarTorque(UFMotion.ScalarForceTorque) - Method in interface nxopen.uf.UFMotion
createScalarTorqueBuilder(ScalarTorque) - Method in interface nxopen.motion.ScalarTorqueCollection
Return
ScalarTorqueBuilder object
License requirements: mechanisms ("MECHANISMS")
Created in NX6.0.0
Creates a
ScaleBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
Created in NX5.0.0
Creates a new scaling set
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
createScenario(String) - Method in interface nxopen.uf.UFSf
createScenarioNx(String) - Method in interface nxopen.uf.UFSf
createScene(View, boolean) - Method in interface nxopen.ViewCollection
Creates a
Scene
License requirements: None.
Creates a nxopen.mechatronics.SCOUTExportBuilder object.
createSCOUTImportBuilder() - Method in interface nxopen.mechatronics.PhysicsManager
Creates a nxopen.mechatronics.SCOUTImportBuilder object.
createScrap() - Method in interface nxopen.die.PierceTaskBuilder
Returns the create scrap setting of the pierce task.
createScrap() - Method in interface nxopen.die.TrimTaskBuilder
Returns the create scrap setting of the trim task.
createScrap() - Method in interface nxopen.tooling.DieEngTrimTaskBuilder
Returns the create scrap.
createScrapDesignBuilder() - Method in interface nxopen.tooling.ScrapDesignCollection
Creates a
ScrapDesignBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX6.0.0
Creates the Search PMI builder
License requirements: None.
createSeatBeltAnchorageBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
createSeatBeltAnchorageBuilder(SeatBeltAnchorage) - Method in interface nxopen.features.VehicleDesignCollection
Creates a
SeatBeltAnchorageBuilder
License requirements: nx_general_packaging ("NX General Packaging")
Created in NX9.0.0
Create addendum section using previously supplied parameters.
createSection(double, double, double) - Method in interface nxopen.SectionCollection
Creates a section.
createSection() - Method in interface nxopen.SectionCollection
Creates a section using default values for chaining, distance, and angle tolerance.
createSection(NXObject) - Method in interface nxopen.SectionCollection
Creates a section with Single Curve rule using the given curve, edge or point.
createSection() - Method in interface nxopen.SketchAssociativeTrimBuilder
The function creates a new empty section object and adds it to the builder
License requirements: None.
createSection() - Method in interface nxopen.SketchOffsetBuilder
The function creates a new empty section object and adds it to the builder
License requirements: None.
createSectionAnalysisBuilder(SectionAnalysisObject) - Method in interface nxopen.geometricanalysis.AnalysisObjectCollection
Creates a Section Analysis object builder
License requirements: studio_analyze ("STUDIO ANALYZE")
.
createSectionAnalysisExBuilder(SectionAnalysisExObject) - Method in interface nxopen.geometricanalysis.AnalysisObjectCollection
Creates a Section Analysis builder of a new version
License requirements: studio_analyze ("STUDIO ANALYZE")
.
createSectionBuilder(DynamicSection, ModelingView) - Method in interface nxopen.display.DynamicSectionCollection
createSectionBuilder(ModelingView) - Method in interface nxopen.display.DynamicSectionCollection
createSectionCurve() - Method in interface nxopen.features.EditCrossSectionBuilder
Create the section curves.
createSectionCurveBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
Creates a
SectionCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX5.0.0
Creates a
SectionDrawingBuilder
License requirements: nx_ship_drafting ("Ship Drafting")
Created in NX10.0.0
Creates a
SectionEditBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX6.0.0
Method to create a section for the preview of guided extension surface
License requirements: None.
createSectionFromReuse(String) - Method in interface nxopen.die.AddendumSectionBuilder
Creates a section using the information stored in the reuse library.
createSectionInertiaAnalysisBuilder(SectionInertiaAnalysis) - Method in interface nxopen.features.FeatureCollection
createSectionInViewBuilder() - Method in interface nxopen.drawings.DraftingViewCollection
Creates the Section In View Builder
License requirements: drafting ("DRAFTING")
.
createSectionLine() - Method in interface nxopen.drawings.SectionLineStyleBuilder
createSectionLineBuilder(SectionLine) - Method in interface nxopen.drawings.SectionLineCollection
createSectionLineCreationBuilder() - Method in interface nxopen.tooling.ToolingDrawingCollection
Creates section line creation builder
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
createSectionLineSegmentBuilder() - Method in interface nxopen.drawings.SectionLineCollection
createSectionLineSegmentPointBuilder() - Method in interface nxopen.drawings.SectionLineSegmentPointListBuilder
createSectionLineStyleBuilder(SectionLine) - Method in interface nxopen.drawings.SectionLineCollection
createSectionPlaneCurves() - Method in interface nxopen.weld.WeldPointBuilder
Create section curve
License requirements: ugweld ("UG WELD")
.
createSectionSurfaceBuilder(SectionSurface) - Method in interface nxopen.features.FeatureCollection
createSectionSurfaceBuilderEx(SectionSurface) - Method in interface nxopen.features.FeatureCollection
createSectionsUsingCurves(NXObject[], SectionCollection.LoopOption, double, double, double) - Method in interface nxopen.SectionCollection
Creates sections using curves such that each section can be extruded to produce one body.
createSectionView(String, NXObject, double[], double[], double[], double[], double[], int[], String, String[]) - Method in interface nxopen.tooling.AssemblyDrawingBuilder
Create section view
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
createSectionViewBuilder(NXObject) - Method in interface nxopen.drawings.DraftingViewCollection
Creates the Section View Builder
License requirements: drafting ("DRAFTING")
.
createSectionViewBuilder() - Method in interface nxopen.features.shipdesign.SectionDrawingBuilder
Creates a
SectionViewBuilder
License requirements: nx_ship_drafting ("Ship Drafting")
Created in NX10.0.0
Creates a
ISegment object following a curve.
Creates the segments in the work part to cover any curves referenced by the
Routing.BuiltInPath object in the component part file.
createSegmentsFromCenterlineCurves() - Method in interface nxopen.die.DrawBeadBuilder
For each curve of the centerline, create a bead segment.
createSegOnCurve(Tag, Tag, Tag) - Method in interface nxopen.uf.UFRoute
createSegThruRcps(Tag, Tag) - Method in interface nxopen.uf.UFRoute
createSelectElementsBuilder() - Method in interface nxopen.cae.SelectElementsManager
Creates a builder for element select command
License requirements: nx_masterfem ("Finite Element Modeling")
.
createSelectHead(UFVariant, UFPath.HeadType, String) - Method in interface nxopen.uf.UFPath
createSelectionBuilder(PartGeometryCopyBuilder.Type) - Method in interface nxopen.features.PartGeometryCopyBuilder
Creates a part geometry copy select builder
License requirements: None.
createSelectionList() - Method in interface nxopen.Part
createSelectionSet(int, NXObject) - Method in interface nxopen.weld.CharacteristicsBuilder
createSelectionSet(CharacteristicsBuilder.Type, NXObject) - Method in interface nxopen.weld.CharacteristicsBuilder
Create a new selection set and add it to the list.
createSelectRegionBuilder() - Method in interface nxopen.drawings.DrawingRegionCollection
Creates select region builder
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
createSelPref() - Method in interface nxopen.display.SelPrefCollection
Create a
SelPref object
License requirements: None.
Creates the builder object of model update sensitivity viewer
License requirements: nx_correl_update ("FE Model Update")
.
createSensorBuilder(Sensor) - Method in interface nxopen.cae.responsesimulation.SensorCollection
Creates a sensor buider
License requirements: nx_response_anlys ("NX Response Analysis")
.
createSensorConfigBuilder(PreTestSensorConfig) - Method in interface nxopen.cae.PreTestSolutionCollection
Creates a sensor configuration dialog builder
License requirements: nx_correl_base ("FE Correlation")
.
createSensorEvaluationSettingBuilder(SensorEvaluationSetting) - Method in interface nxopen.cae.responsesimulation.EvaluationSettingManager
Creates sensor evaluation setting object
License requirements: nx_response_anlys ("NX Response Analysis")
.
createSeparateParts() - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder
Returns the value that determines if separate pars are created
License requirements: None.
createSeqno(UFVariant, UFPath.Seqno, int, int, int, String) - Method in interface nxopen.uf.UFPath
createSequence(String) - Method in interface nxopen.motion.PostProcess
Create sequence
License requirements: mechanisms ("MECHANISMS")
.
createSequence(String, Tag) - Method in interface nxopen.uf.UFAssem
createSeResult(Result, int) - Method in interface nxopen.cae.ResultManager
Creates a result object given a seid within
an existing
Result .
Creates a
SetModeBuilder
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
Created in NX8.0.0
Creates a Sew feature builder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
.
CreateSewData() - Constructor for class nxopen.uf.UFModeling.CreateSewData
createSewFacetBodyBuilder() - Method in interface nxopen.facet.FacetedBodyCollection
Creates a
SewFacetBodyBuilder
License requirements: studio_free_form ("STUDIO FREE FORM") OR die_engineering ("DIE ENGINEERING")
Created in NX9.0.0
Creates a
Shadows
License requirements: None.
Creates the builder object of correl shape metric viewer
License requirements: nx_correl_base ("FE Correlation")
.
createShapeOptimizationSolutionBuilder(TBSShapeOptimizationSolution) - Method in interface nxopen.cae.optimization.TBSOptimizationManager
createShapeRestrictAreaBuilder(TBSShapeRestrictArea) - Method in interface nxopen.cae.optimization.TBSOptimizationManager
Create the builder of
TBSRestrictAreaBuilder
License requirements: cae_opt_toposhape ("NX Shape Optimization")
Created in NX8.5.0
Creates unform sheet body result.
createSheetMetalFromSolidBuilder(nxopen.features.Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
createSheetZoneReferenceBuilder() - Method in interface nxopen.DraftingManager
Creates the Sheet Zone Reference builder
License requirements: drafting ("DRAFTING")
.
createShelfBuilder(Shelf) - Method in interface nxopen.features.AeroCollection
Creates a
ShelfBuilder
License requirements: nx_aero_design (" NX Aero Design")
Created in NX10.0.0
Creates a shell to solid builder
License requirements: nx_masterfem ("Finite Element Modeling")
.
createShellBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
Creates an Shell builder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.
createShellEadBuilder() - Method in interface nxopen.cae.NodeElementManager
Creates a builder for the Shell EAD block.
createShellExpansionBuilder(ShellExpansion) - Method in interface nxopen.features.ShipCollection
Creates a
ShellExpansionBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
Created in NX7.5.0
Creates a
ShellFaceBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
Created in NX6.0.0
Creates a
ShellTemplateBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
Created in NX8.0.0
Creates a
ShipAttributeHolder
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
Created in NX8.0.0
Creates a
ShipAttributeHolder
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
Created in NX8.0.0
Creates a
ShipContainerBuilder
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
Created in NX8.0.0
Creates a
ShipCoordinatesBuilder
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
Created in NX8.0.0
Creates a
ShipCutoutBuilder
License requirements: nx_ship_concept ("Ship Concept")
Created in NX7.5.0
Creates a
ShipDesignVersionUpBuilder
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
Created in NX9.0.0
Creates a
ShipEndCutBuilder
License requirements: nx_ship_concept ("Ship Concept")
Created in NX7.5.0
Creates a
ShipFeatureConverter
License requirements: nx_ship_concept ("Ship Concept")
Created in NX7.5.0
Creates a
ShipIntersectionsBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
Created in NX7.5.0
Creates a
ShipSectionBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
Created in NX7.5.0
Creates a builder for Show Adjacent Command
License requirements: nx_masterfem ("Finite Element Modeling")
.
createShowComponentBuilder() - Method in interface nxopen.assemblies.AssemblyManager
Creates a
ShowComponentBuilder
License requirements: assemblies ("ASSEMBLIES MODULE")
Created in NX6.0.0
Creates a builder for Show Hide Command
License requirements: nx_masterfem ("Finite Element Modeling")
.
createShowOnlyBuilder() - Method in interface nxopen.cae.ShowHideManager
Creates a builder for Show Only Command
License requirements: nx_masterfem ("Finite Element Modeling")
.
createShowRelatedFacesBuilder() - Method in interface nxopen.features.FeatureCollection
Creates a
ShowRelatedFacesBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
Created in NX7.0.0
Return
SignalChartBuilder object
License requirements: nx_motion_motor ("NX Motion Motor")
Created in NX6.0.0
Creates a
SignalChartListItem
License requirements: nx_motion_motor ("NX Motion Motor")
Created in NX6.0.0
Creates a
SilhouetteFlangeBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
Created in NX6.0.0
Creates a
SimBcXyPlotBuilder
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX9.0.0
Creates a sim debug builder
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
createSimpleHole(double[], double[], String, String, String, Tag, Tag) - Method in interface nxopen.uf.UFModlFeatures
createSimpleInterferenceObject() - Method in interface nxopen.geometricanalysis.AnalysisManager
Creates a simple interference object
License requirements: None.
createSimpleSxview(Tag, double, double[], double[], Tag, UFDrf.Object, double[]) - Method in interface nxopen.uf.UFDraw
createSimplifiedCurve(int, Tag[], double) - Method in interface nxopen.uf.UFCurve
createSimplifiedCurve(Tag, Tag, boolean) - Method in interface nxopen.uf.UFDraw
CreateSimplifiedCurveData() - Constructor for class nxopen.uf.UFCurve.CreateSimplifiedCurveData
CreateSimplifiedCurveData() - Constructor for class nxopen.uf.UFDraw.CreateSimplifiedCurveData
createSimplify(UFModl.SimplData) - Method in interface nxopen.uf.UFModlFeatures
CreateSimplifyData() - Constructor for class nxopen.uf.UFModlFeatures.CreateSimplifyData
createSimplifyPathBuilder(ISegment[]) - Method in interface nxopen.routing.RouteManager
createSimulation(NXObject) - Method in interface nxopen.motion.MotionSession
Create the Simulation.
createSimulation(String, Tag, int, String[]) - Method in interface nxopen.uf.UFSf
createSimulationObject(String, String) - Method in interface nxopen.cae.SimSimulationObjectCollection
Creates a Simulation object for the simulation object descriptor passed
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
createSimulationObjectGroup() - Method in interface nxopen.cae.SimGroupContainer
Creates a simulation object group for a solution or solution step
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
createSimulationOptionsBuilder(SimulationOptionsBuilder.DialogType) - Method in interface nxopen.sim.KinematicConfigurator
Creates a simulation options
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
createSineEventBuilder(LaminateSineEvent) - Method in interface nxopen.cae.LaminateDynamicEventCollection
Creates a builder for the laminate sine event.
createSingleFeatures() - Method in interface nxopen.weld.JointmarkBuilder
Returns the control option to determine if individual features should be created.
createSingleJointFromFeature(Curve, boolean) - Method in interface nxopen.weld.WeldJointBuilder
Creates a joint from a feature.
createSingleObjective(TBSDesignResponse, double, double) - Method in interface nxopen.cae.optimization.TBSOptimizationManager
Creates an object of
TBSSingleObjective
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
Created in NX8.0.0
The creation for single weld point
License requirements: ugweld ("UG WELD")
.
createSinumerikCaExportBuilder() - Method in interface nxopen.sim.KinematicConfigurator
Creates a builder for a sinumerik ca export spf
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
createSinumerikCaFacetBuilder() - Method in interface nxopen.sim.KinematicConfigurator
Creates a builder for a sinumerik ca facet
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
createSinumerikCaPlaceholderBuilder() - Method in interface nxopen.sim.KinematicConfigurator
Creates a builder for a sinumerik ca placeholder
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
createSinumerikCaSimplifyBodiesBuilder() - Method in interface nxopen.sim.KinematicConfigurator
Creates a builder for a sinumerik ca simplify bodies
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
createSketch() - Method in interface nxopen.features.OptimizeCurveBuilder
Returns the create sketch flag.
createSketch(String, ISurface, IReferenceAxis, Vector3d, AxisOrientation, Sense, PlaneNormalOrientation) - Method in interface nxopen.SketchCollection
createSketch(String, ISurface, IReferenceAxis, Vector3d, AxisOrientation, Sense, PlaneNormalOrientation, NXObject) - Method in interface nxopen.SketchCollection
createSketch(String, int, double[], Tag[], int[], int) - Method in interface nxopen.uf.UFSket
createSketchAlongPathBuilder(Sketch) - Method in interface nxopen.SketchCollection
Creates a
SketchAlongPathBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
Created in NX5.0.0
Creates a
SketchAssociativeTrimBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
Created in NX6.0.0
Creates a
SketchChamferBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
Created in NX7.5.0
Creates a
SketchConicBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
Created in NX6.0.0
Creates a
SketchEllipseBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
Created in NX6.0.0
Creates a
SketchFitCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX8.5.0
Creates a
SketchInDraftingBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
Created in NX5.0.0
Creates a
SketchMirrorPatternBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
Created in NX7.5.0
Creates a
SketchPasteBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
Created in NX7.5.0
Creates a
SketchPatternBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
Created in NX7.5.0
Creates a
SketchPolygonBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
Created in NX7.5.0
Creates the Sketch Section Line builder
License requirements: drafting ("DRAFTING")
.
createSketchSplineBuilder(Spline) - Method in interface nxopen.features.FeatureCollection
Creates a Studio Spline builder for sketcher
License requirements: features_modeling ("FEATURES MODELING") OR geometric_tol ("GDT"), solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
createSkipWelds() - Method in interface nxopen.weld.WeldGrooveBuilder
Returns a value indicating whether to create skip welds
License requirements: ugweld ("UG WELD")
.
createSlidingJointBuilder(SlidingJoint) - Method in interface nxopen.mechatronics.SlidingJointCollection
createSliverFaceMethod(CAEBody, double) - Method in interface nxopen.cae.SmartSelectionManager
Creates a sliver face method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createSliverFaceMethod(CAEBody[], double) - Method in interface nxopen.cae.SmartSelectionManager
Creates a sliver face method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createSliverFaceMethod(CAEFace[], double) - Method in interface nxopen.cae.SmartSelectionManager
Creates a sliver face method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createSlopeBuilder(Feature) - Method in interface nxopen.features.AutomotiveCollection
createSlopeBuilder(Slope) - Method in interface nxopen.features.VehicleDesignCollection
Creates a
SlopeBuilder
License requirements: nx_general_packaging ("NX General Packaging")
Created in NX9.0.0
Creates a slope constraint.
createSlugRetentionBuilder(nxopen.features.FeatureGroup) - Method in interface nxopen.tooling.ProgressiveDieManager
Creates slug retention builder.
createSmartCompositeCurve(Section, SmartObject.UpdateOption, double) - Method in interface nxopen.CurveCollection
createSmartCompositeCurve(Curve, SmartObject.UpdateOption) - Method in interface nxopen.CurveCollection
createSmartRuleBuilder(SmartRule) - Method in interface nxopen.features.ShipCollection
Creates a
SmartRuleBuilder
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
Created in NX8.5.0
Creates a
SmashComponentBuilder that can smash the selected
2D Component instance
License requirements: nx_layout ("NX Layout")
Created in NX10.0.0
Smashes a custom symbol
License requirements: None.
createSmashDrawingViewBuilder() - Method in interface nxopen.drafting.DraftingApplicationManager
createSmbend(UFModl.SmbendData) - Method in interface nxopen.uf.UFModlSmd
createSmbendCorner(UFModl.SmbendCornerData) - Method in interface nxopen.uf.UFModlSmd
createSmbendCylinder(UFModl.SmbendCylinderData) - Method in interface nxopen.uf.UFModlSmd
createSMBoundaryCondition() - Method in interface nxopen.features.sheetmetal.MetaformBuilder
Create a new boundary condition.
createSmcorner(UFModl.SmcornerData) - Method in interface nxopen.uf.UFModlSmd
createSmcutout(UFModl.SmcutoutData) - Method in interface nxopen.uf.UFModlSmd
createSmdFlange(Tag, Tag, double[], double[], double[], UFModl.FlangeData) - Method in interface nxopen.uf.UFModlSmd
createSmhole(UFModl.SmholeData) - Method in interface nxopen.uf.UFModlSmd
createSmjoggle(UFModl.SmjoggleData) - Method in interface nxopen.uf.UFModlSmd
createSmoothBuilder(TBSSmooth) - Method in interface nxopen.cae.optimization.TBSOptimizationManager
Creates the builder of
TBSSmoothBuilder
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
Created in NX8.0.0
Creates a nxopen.features.SmoothCurveStringBuilder
License requirements: studio_free_form ("STUDIO FREE FORM")
Created in NX9.0.0
createSmoothFacetBodyBuilder() - Method in interface nxopen.facet.FacetedBodyCollection
Creates a
SmoothFacetBodyBuilder
License requirements: studio_free_form ("STUDIO FREE FORM")
Created in NX7.5.0
Creates a
SmoothSplineBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
Created in NX6.0.0
Caches data for drafing objects in the drawing part
License requirements: None.
createSnipFacetBodyBuilder() - Method in interface nxopen.facet.FacetedBodyCollection
createSnipIntoPatchesBuilder() - Method in interface nxopen.geometricutilities.CAMDataPrepManager
createSnipSurfaceBuilder(SnipSurface) - Method in interface nxopen.features.FeatureCollection
Creates a
SnipSurfaceBuilder
License requirements: studio_free_form ("STUDIO FREE FORM")
Created in NX6.0.0
Creates a solid density object
License requirements: None.
createSolidEdgeImporter() - Method in interface nxopen.ImportManager
Creates a Solid Edge importer object.
createSolidPropertyCheckBuilder() - Method in interface nxopen.cae.ModelCheckManager
Creates a builder for solid properties check command
License requirements: nx_masterfem ("Finite Element Modeling")
.
createSolidPunch(UFModl.SolidPunchData) - Method in interface nxopen.uf.UFModlSmd
createSolidPunchBuilder(nxopen.features.Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
Creates a
SolidPunchBuilder
License requirements: nx_sheet_metal ("NX Sheet Metal")
Created in NX5.0.0
Returns the option for creating interference solids for HD3D.
createSolidTrackingBuilder(SolidTrackPoint) - Method in interface nxopen.cam.Tool
Creates a Solid Trackpoint builder
License requirements: cam_base ("CAM BASE")
.
createSolution(String, String, String, String) - Method in interface nxopen.cae.SimSimulation
Creates a solution
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
createSolution(SimConditionSequence, String, String, String, String) - Method in interface nxopen.cae.SimSimulation
Creates a solution from a condition sequence
License requirements: nx_masterfem ("Finite Element Modeling")
.
createSolution(SimConditionSequence, int, String, String, String, String) - Method in interface nxopen.cae.SimSimulation
Creates a solution from a condition sequence and number of integration steps
License requirements: nx_masterfem ("Finite Element Modeling")
.
createSolution(SimConditionSequence, double, Unit, String, String, String, String) - Method in interface nxopen.cae.SimSimulation
Creates a solution from a condition sequence and integration step size
License requirements: nx_masterfem ("Finite Element Modeling")
.
createSolutionBuilder(CorrelSolution) - Method in interface nxopen.cae.CorrelSolutionCollection
Creates the builder object of correl meta solution
License requirements: None.
createSolutionBuilder(ModelUpdateSolution) - Method in interface nxopen.cae.ModelUpdateSolutionCollection
Creates the builder object of model update meta solution
License requirements: None.
createSolutionBuilder(Solution) - Method in interface nxopen.cae.responsesimulation.SolutionCollection
Creates the builder object of response analysis meta solution
License requirements: nx_response_anlys ("NX Response Analysis")
.
createSolutionBuilder(MotionSolution) - Method in interface nxopen.motion.MotionSolutionCollection
createSolutionManager() - Method in interface nxopen.cae.SimSimulation
Creates a
SolutionManager for the active solution environment
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX10.0.0
Creates a solution result object given a
SimSolution
It is user's responsibility to destroy the result object once done
using
ResultManager.deleteResult(nxopen.cae.Result) , in order to free up system resources
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX6.0.2
Creates a step and add to the solution
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
createSolverAppendOption() - Method in interface nxopen.cae.CaePart
Returns a solver append option object for importing the solver specific data into an existing
FemPart or
SimPart .
Creates a builder for the durability metasolution solver.
createSpaceReservationBuilder(NXObject[]) - Method in interface nxopen.routing.RouteManager
Creates a Space Reservation builder.
createSpacingExp() - Method in interface nxopen.SketchPatternBuilder
Returns the flag to indicate if a spacing expression needs to be created
License requirements: None.
createSpatialGraph(int, String, Post.GraphParameters, int) - Method in interface nxopen.cae.Post
Create a graph by extracting data from the input postview id, along an input path id
The input postview id is what was returned from CreatePostview or CreatePostviewForResult.
createSpatialMapBuilder(SpatialMap) - Method in interface nxopen.fields.FieldManager
createSpecificationsForLogicalObjects(LogicalObject[]) - Method in interface nxopen.pdm.PartOperationBuilder
Create new specifications for Logical Objects
License requirements: None.
createSpecificNoteBuilder(SpecificNote) - Method in interface nxopen.annotations.PmiAttributeCollection
createSpecifyDateBuilder() - Method in interface nxopen.visualreporting.VisualReportManager
createSpecifyRuleBuilder() - Method in interface nxopen.drafting.AutomationManager
createSpeedControlBuilder(SpeedControl) - Method in interface nxopen.mechatronics.SpeedControlCollection
createSphere(UFModl.FeatureSigns, Tag, double[], String) - Method in interface nxopen.uf.UFModlFeatures
createSphere1(UFModl.FeatureSigns, double[], String) - Method in interface nxopen.uf.UFModlFeatures
createSphereBuilder(Sphere) - Method in interface nxopen.features.FeatureCollection
Creates a
SphereBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX6.0.0
Creates a new spherical coordinate system
License requirements: None.
createSphericalCoordinateSystem(Point3d, NXMatrix, boolean) - Method in interface nxopen.CoordinateSystemCollection
Creates a new spherical coordinate system
License requirements: None.
createSphericalCoordinateSystem(Xform, SmartObject.UpdateOption) - Method in interface nxopen.CoordinateSystemCollection
Creates a SphericalCoordinateSystem from a Xform and update option.
createSphericalCornerBuilder(SphericalCorner) - Method in interface nxopen.features.FeatureCollection
Creates a
SphericalCornerBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
Created in NX8.5.0
Creates a builder for spider element command
License requirements: nx_masterfem ("Finite Element Modeling")
.
createSpindleOff(UFVariant, String) - Method in interface nxopen.uf.UFPath
createSpindleOn(UFVariant, UFPath.SpindleOn, String) - Method in interface nxopen.uf.UFPath
createSpindleReverse(UFVariant, String) - Method in interface nxopen.uf.UFPath
createSpine() - Method in interface nxopen.routing.RouteSweptTwistBuilder
Creates a new spine
License requirements: routing_harness ("Routing Harness")
.
createSpinePoint() - Method in interface nxopen.geometricutilities.AlongSpineBuilder
Creates a new spine point
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
createSpinePoint() - Method in interface nxopen.routing.RouteSweptTwistBuilder
Creates a new spine point
License requirements: routing_harness ("Routing Harness")
.
createSpinePointData(double, double, Section) - Method in interface nxopen.geometricutilities.SpinePointDataCollection
Creates a SpinePointData object.
createSpinePointData(Expression, double, Section) - Method in interface nxopen.geometricutilities.SpinePointDataCollection
Creates a SpinePointData object with expression.
createSpinningClone(KinematicComponent, boolean) - Method in interface nxopen.sim.KinematicConfigurator
Creates a copy of the given component and spins its assigned geometry around a spinning axis.
createSpline(UFCurve.Spline) - Method in interface nxopen.uf.UFCurve
createSpline(int, int, double[], double[]) - Method in interface nxopen.uf.UFModlGeneral
createSpline(UFSo.UpdateOption, UFSo.SplineData) - Method in interface nxopen.uf.UFSo
CreateSplineData() - Constructor for class nxopen.uf.UFCurve.CreateSplineData
CreateSplineData() - Constructor for class nxopen.uf.UFModlGeneral.CreateSplineData
createSplineFeature(Tag) - Method in interface nxopen.uf.UFCurve
createSplinePathBuilder(Curve) - Method in interface nxopen.routing.RouteManager
createSplineThruPts(int, int, int, UFCurve.PtSlopeCrvatr[], double[], int) - Method in interface nxopen.uf.UFCurve
createSplitBodyBuilder(SplitBody) - Method in interface nxopen.features.FeatureCollection
Creates a
SplitBodyBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX6.0.0
Creates a Split Duct builder.
createSplitProfilePlateBuilder() - Method in interface nxopen.features.ShipCollection
createSplitScreenLayoutAndNamedViews(String, String) - Method in interface nxopen.LayoutCollection
This method creates a layout with two modeling views.
CreateSplitScreenLayoutAndNamedViewsData() - Constructor for class nxopen.LayoutCollection.CreateSplitScreenLayoutAndNamedViewsData
createSplitSolidBuilder() - Method in interface nxopen.tooling.SplitSolidCollection
Creates split solid builder
License requirements: None.
createSplitStandardPartBuilder(SplitStandardPart) - Method in interface nxopen.features.ShipCollection
Creates a
SplitStandardPartBuilder
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
Created in NX9.0.0
Create a new splitter
License requirements: cam_base ("CAM BASE")
.
createSplitterCurve() - Method in interface nxopen.routing.Division
Creates splitting Curve.
createSpreadsheetData() - Method in interface nxopen.tooling.ToolingSession
Create Tooling.SpreadsheetData object.
createSpring(UFMotion.SpringDamper) - Method in interface nxopen.uf.UFMotion
createSpringbackCompensationBuilder(SpringbackCompensation) - Method in interface nxopen.die.DieCollection
createSpringBuilder(Spring) - Method in interface nxopen.motion.SpringCollection
Return
SpringBuilder object
License requirements: mechanisms ("MECHANISMS")
Created in NX6.0.0
Creates a builder for the Spring EAD block.
createStage(View, boolean) - Method in interface nxopen.ViewCollection
Creates a
Stage
License requirements: None.
Creates a standard section builder
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
createStandardPartBuilder() - Method in interface nxopen.tooling.StandardPartCollection
Creates a StandardPart builder
License requirements: None.
createStandardPartFrameworkBuilder(Component) - Method in interface nxopen.features.ShipCollection
Creates a
StandardPartFrameworkBuilder
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
Created in NX8.0.0
Creates a
StandardPartFrameworkBuilder
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
Created in NX8.5.0
Creates a new StandardPartItemBuilder and intialize the builder with data from the reference builder.
createStandardPartPositionBuilder() - Method in interface nxopen.tooling.StandardPartPositionCollection
Creates a StandardPartPosition builder
License requirements: None.
createStandardViewsBuilder() - Method in interface nxopen.drawings.DraftingViewCollection
Creates a StandardViewsBuilder
License requirements: nx_layout ("NX Layout")
.
createStartSymmetricModelingBuilder() - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
createStaticCurbBuilder(Feature) - Method in interface nxopen.features.AutomotiveCollection
createStaticCurbBuilder(StaticCurb) - Method in interface nxopen.features.VehicleDesignCollection
Creates a
StaticCurbBuilder
License requirements: nx_general_packaging ("NX General Packaging")
Created in NX9.0.0
Creates the builder object of the durability static event.
createStaticLoadExcitationBuilder(StaticLoadExcitation) - Method in interface nxopen.cae.responsesimulation.ExcitationCollection
Creates the builder object of
StaticLoadExcitation
License requirements: nx_response_anlys ("NX Response Analysis")
Created in NX6.0.0
Creates a nxopen.features.shipdesign.SteelSupportBuilder
License requirements: nx_ship_concept ("Ship Concept")
Created in NX7.5.0
createSteelVentHolesBuilder(SteelVentHoles) - Method in interface nxopen.features.ShipCollection
Creates a
SteelVentHolesBuilder
License requirements: nx_ship_concept ("Ship Concept")
Created in NX7.5.0
Creates a Steinbichler importer object.
createStep(int, String) - Method in interface nxopen.cae.SimSolution
Creates a step and add to the solution
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
createStep(int, boolean, String) - Method in interface nxopen.cae.SimSolution
Creates a step, adds it to the solution and optionally makes it the Active Step.
createStep(int, boolean, String, SimSolution.StepPosition, SimSolutionStep) - Method in interface nxopen.cae.SimSolution
Create a step at the specified position, add to the solution and optionally make it active
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
createStep(Tag, Tag, int, double, double, String, Tag) - Method in interface nxopen.uf.UFAssem
createStep203Creator() - Method in interface nxopen.DexManager
Create the Step203Creator
License requirements: None.
createStep203Importer() - Method in interface nxopen.DexManager
Create the Step203Importer
License requirements: None.
createStep214Creator() - Method in interface nxopen.DexManager
Create the Step214Creator
License requirements: None.
createStep214Importer() - Method in interface nxopen.DexManager
Create the STEP214Importer
License requirements: None.
createStepBuilder(Step) - Method in interface nxopen.features.AeroCollection
Creates a
StepBuilder
License requirements: nx_aero_design (" NX Aero Design")
Created in NX10.0.0
Creates a
StepManager for a solution
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX10.0.0
Create a sub-node for a step in the Task Navigator.
createStiffenerBuilder(Stiffener) - Method in interface nxopen.features.ShipCollection
Creates a
StiffenerBuilder
License requirements: nx_ship_detail ("Ship Detail Design")
Created in NX8.0.0
Creates a nxopen.facet.STLImportBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_1 ("basic freeform modeling")
Created in NX6.0.0
createStlImporter() - Method in interface nxopen.ImportManager
Creates an STL importer object.
createStock(StockData, Anchor, CrossSection, ISegment[]) - Method in interface nxopen.routing.FillerCollection
Creates a
Filler stock object.
Creates a
StockBrowserBuilder which finds and filters stock
License requirements: routing_base ("Routing Basic")
Created in NX6.0.0
Creates a
StockColorBuilder which assigns color to the face of stocks
having rectangular cross sections
License requirements: routing_harness ("Routing Harness")
Created in NX7.5.0
Creates (or finds an existing
StockData ) object in the work
part that has the characteristics specified by the input list of characteristic values.
Creates a new stock data in the work part.
createStockOffsetPoint(Point, Direction, String, SmartObject.UpdateOption) - Method in interface nxopen.PointCollection
Creates a Routing "Stock Offset" point.
createStockOffsetPointBuilder(NXObject) - Method in interface nxopen.routing.RouteManager
Creates a builder than can create or edit stock offset points.
createStockPartConverterBuilder() - Method in interface nxopen.routing.RouteManager
createStocksizeBuilder() - Method in interface nxopen.tooling.StockSizeCollection
Creates a StockSize builder
License requirements: None.
createStockStyleBuilder(NXObject[]) - Method in interface nxopen.routing.RouteManager
Creates a
StockStyleBuilder which assigns style to stock
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
Created in NX6.0.0
Creates a builder for a durability strain gage analysis.
createStrainGageBuilder(StrainGage) - Method in interface nxopen.cae.responsesimulation.StrainGageCollection
Creates a strain gage buider
License requirements: nx_response_anlys ("NX Response Analysis")
.
createStrainGageEvaluationSettingBuilder(StrainGageEvaluationSetting) - Method in interface nxopen.cae.responsesimulation.EvaluationSettingManager
Creates strain gage evaluation setting object
License requirements: nx_response_anlys ("NX Response Analysis")
.
createStreamlineSeedSet(int, String, Post.StreamlineSeed[]) - Method in interface nxopen.cae.Post
Create a seed set that can be used to specify the start points for streamline extraction.
createStrengthResultsEvaluationSettingBuilder(StrengthResultsEvaluationSetting) - Method in interface nxopen.cae.responsesimulation.EvaluationSettingManager
Creates strength results evaluation setting object
License requirements: nx_response_anlys ("NX Response Analysis")
.
createStressaxesBuilder(DurabilityAxisSearch) - Method in interface nxopen.cae.DurabilityAxisSearchCollection
Creates the builder object of durability stress axes.
createStringAttributeListEntry(boolean, boolean, boolean, String, int, int, String, String) - Method in interface nxopen.weld.CharacteristicsSelectionBuilder
createStringAttributeListEntry(boolean, boolean, boolean, boolean, String, int, int, String, String) - Method in interface nxopen.weld.CharacteristicsSelectionBuilder
Create a string attribute list entry and add it to the list.
createStripLayoutBuilder() - Method in interface nxopen.tooling.StripLayoutCollection
createStripLayoutStationInformationBuilder() - Method in interface nxopen.tooling.StripLayoutCollection
createStripperVentingBuilder(nxopen.features.FeatureGroup) - Method in interface nxopen.tooling.ProgressiveDieManager
createStudioImageCaptureBuilder() - Method in interface nxopen.ViewCollection
createStudioSplineBuilder(StudioSpline) - Method in interface nxopen.features.FeatureCollection
createStudioSplineBuilderEx(NXObject) - Method in interface nxopen.features.FeatureCollection
Creates a Studio Spline builder
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
.
createStudioSurfaceBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
Creates a Studio Surface Builder
License requirements: solid_modeling ("SOLIDS MODELING")
.
createStudioXformBuilder(StudioXform) - Method in interface nxopen.features.FeatureCollection
createStudioXformBuilderEx(StudioXform) - Method in interface nxopen.features.FeatureCollection
Creates a Features.StudioXformBuilderEx
License requirements: studio_free_form ("STUDIO FREE FORM")
Created in NX7.0.0
createStycorner(UFModl.StycornerData) - Method in interface nxopen.uf.UFModlFeatures
createStyledBlendBuilder(StyledBlend) - Method in interface nxopen.features.FeatureCollection
Creates a
StyledBlendBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
Created in NX6.0.0
Creates a
StyledCornerBuilder
License requirements: studio_free_form ("STUDIO FREE FORM")
Created in NX6.0.0
Creates a
StyledSweepBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
Created in NX6.0.0
Creates an NX (UIStyler generated) "bottom" dialog.
createSubdivFace(Tag[], int, Tag, int, double[]) - Method in interface nxopen.uf.UFModeling
createSubdivideFacetBodyBuilder() - Method in interface nxopen.facet.FacetedBodyCollection
createSubdivideSegmentBuilder(NXObject, Point3d) - Method in interface nxopen.routing.RouteManager
Creates a
SubdivideSegmentBuilder that can
subdivide a segment into multiple segments
License requirements: routing_base ("Routing Basic")
Created in NX5.0.0
Creates a nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilder .
createSubdivisionProjectCageBuilder() - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
createSubdivisionRevolveBuilder() - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
createSubdivisionSetContinuityBuilder() - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
createSubdivisionSetWeightBuilder() - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
createSubdivisionSewCageBuilder() - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
createSubdivisionSplitFaceBuilder() - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
createSubdivisionSubdivideFaceBuilder() - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
createSubdivisionSweepBuilder() - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
createSubdivisionTubeBuilder() - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
createSubFieldExpression(FieldVariable) - Method in interface nxopen.fields.FieldManager
createSubInsertBuilder() - Method in interface nxopen.tooling.SubInsertCollection
Creates subinsert builder
License requirements: None.
createSubsetBuilder(Subset) - Method in interface nxopen.assemblies.SubsetCollection
Creates an
SubsetBuilder
License requirements: nx_4gd_integration ("4th Generation Design")
Created in NX8.5.0
Creates a subtract feature.
CreateSubtractFeatureData() - Constructor for class nxopen.features.FeatureCollection.CreateSubtractFeatureData
createSupportCasting() - Method in interface nxopen.die.CastReliefBuilder
Returns the value (true or false) to decide if support casting should be created
License requirements: None.
createSuppressByExpressionBuilder() - Method in interface nxopen.ExpressionCollection
createSuppressHoleBuilder() - Method in interface nxopen.cae.AbstractionManager
Creates a builder for Suppress Hole Command
License requirements: nx_masterfem ("Finite Element Modeling")
.
createSurfaceCoatBuilder(MeshShellFromSolid) - Method in interface nxopen.cae.MeshManager
Creates a shell from solid (surface coat) builder
License requirements: nx_masterfem ("Finite Element Modeling")
.
createSurfaceCoatBuilder() - Method in interface nxopen.cae.NodeElementManager
Creates a builder for the Surface Coat.
createSurfaceContactMesh(Tag, Tag, UFVariant) - Method in interface nxopen.uf.UFSf
createSurfaceContinuityAnalysisBuilder(DisplayableObject) - Method in interface nxopen.geometricanalysis.AnalysisObjectCollection
Creates a surface continuity analysis builder
License requirements: gateway ("UG GATEWAY")
.
createSurfaceContourBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
Creates a surface contour operation builder
License requirements: cam_base ("CAM BASE")
.
createSurfaceCurveIntersection(Tag, Tag, Tag, Tag) - Method in interface nxopen.uf.UFPoint
createSurfaceData(Face) - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
Create surface data for enlarged surface.
createSurfaceFinishBuilder(SurfaceFinish) - Method in interface nxopen.annotations.PmiAttributeCollection
createSurfaceFromPolygonFace(Part, CAEFace) - Method in interface nxopen.cae.CADModeling
CREATE cad surface from polygon face in part
License requirements: nx_masterfem ("Finite Element Modeling")
.
createSurfaceIntersectionBuilder(DisplayableObject) - Method in interface nxopen.geometricanalysis.AnalysisObjectCollection
Creates a surface intersection builder
License requirements: studio_analyze ("STUDIO ANALYZE")
.
createSurfaceRegions(nxopen.features.Feature) - Method in interface nxopen.cam.CAMSetup
Creates a surface regions builder
License requirements: cam_base ("CAM BASE")
.
createSurfaceUvdirectionBuilder() - Method in interface nxopen.BodyCollection
Creates a SurfaceUVDirectionBuilder
License requirements: studio_free_form ("STUDIO FREE FORM")
.
createSurfaceWeldBuilder(SurfaceWeld) - Method in interface nxopen.weld.WeldManager
Creates a
SurfaceWeldBuilder
License requirements: structure_weld ("STRUCTURE WELD")
Created in NX9.0.0
Creates a builder for Manual Hex Mesh.
createSweptBuilder(Swept) - Method in interface nxopen.features.FeatureCollection
Creates a
SweptBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX5.0.0
Creates a
SweptVolumeBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX9.0.0
Creates a symbol catalog dialog builder
License requirements: nx_layout ("NX Layout")
.
createSymbolCurve(String, String) - Method in interface nxopen.weld.JointmarkBuilder
Create curve From PMI symbol
License requirements: ugweld ("UG WELD")
.
createSymbolFileBuilder(SymbolFile) - Method in interface nxopen.annotations.SymbolFileCollection
Creates a drafting symbol file builder
License requirements: nx_layout ("NX Layout")
.
createSymbolFont(String, double, double[], double[], int, Tag[]) - Method in interface nxopen.uf.UFDrf
createSymbThread(UFModl.SymbThreadData) - Method in interface nxopen.uf.UFModeling
createSymbThread2(UFModl.SymbThreadData, boolean) - Method in interface nxopen.uf.UFModl
createSymCline(UFDrf.Object, UFDrf.Object) - Method in interface nxopen.uf.UFDrf
createSymmetricalCenterlineBuilder(SymmetricalCenterline) - Method in interface nxopen.annotations.CenterlineCollection
Creates the Symmetrical Centerline builder
License requirements: None.
createSymmetricBuilder(Symmetric) - Method in interface nxopen.features.FeatureCollection
Creates a
SymmetricBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
Created in NX6.0.0
Creates a
SynchronizeDesignViewBuilder
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
Created in NX8.5.0
Creates a system expression.
createSystemExpression(String, String) - Method in interface nxopen.ExpressionCollection
Creates a system expression of the specified type.
createSystemExpressionFromReferenceString(String) - Method in interface nxopen.ExpressionCollection
Creates a system string expression from a reference string in Drafting Note format.
createSystemExpressionWithUnits(String, Unit) - Method in interface nxopen.ExpressionCollection
Creates a system expression with units.
createSystemRoot(SystemRoot.Type) - Method in interface nxopen.mechatronics.MechatronicsManager
Creates a system root object in specified part.
createTab(UFNxsm.TabData) - Method in interface nxopen.uf.UFNxsm
createTabFeatureBuilder(nxopen.features.Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
Create a NXSM Tab feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
createTableEditorDefaultDataProvider(BasePart) - Method in interface nxopen.Session
Creates a data provider for a table editor.
createTableEditSettingsBuilder(DisplayableObject[]) - Method in interface nxopen.drafting.SettingsManager
Creates a
TableEditSettingsBuilder
For multiple object settings, first create primary settings builder by passing all
selected 'n' objects.Then create 'n-1' secondary builders by passing single selected
object starting from second selected object.
Creates a field from the lists of independent, dependent variables along with a given Result Probe.
createTableInPart(BasePart) - Method in interface nxopen.fields.Field
Create a new table field from this field (regardless of type).
createTableInstance(Tag, Tag, double[]) - Method in interface nxopen.uf.UFGdt
createTableSectionBuilder(TableSection) - Method in interface nxopen.annotations.TableSectionCollection
If null create a new table section, otherwise edit existing new table section
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
createTabPointDataBuilder() - Method in interface nxopen.cam.WedmCustomBoundaryDataBuilder
The create tab point data builder
License requirements: cam_base ("CAM BASE")
.
createTabularNote(UFDraw.TabnotParams) - Method in interface nxopen.uf.UFDraw
createTagFormBuilder(TagFormObject) - Method in interface nxopen.mechatronics.TagFormCollection
createtangency - Variable in class nxopen.routing.SubdivideSegmentBuilder.SplineSettingsData
Creates tangency at the point where the spline is subdivided by adding parallel extensions.
createtangency - Variable in class nxopen.routing.SubdivideSegmentBuilder.SplineSettingValuesData
Creates tangency at the point where the spline is subdivided by adding parallel extensions.
createTangentBuilder(Tangent) - Method in interface nxopen.features.FeatureCollection
Creates a
TangentBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
Created in NX6.0.0
Creates a tangent constraint.
createTangentContinuousEdgeMethod(CAEEdge, double) - Method in interface nxopen.cae.SmartSelectionManager
Creates a tangent continuous edge method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createTangentContinuousEdgeMethod(CAEEdge[], double) - Method in interface nxopen.cae.SmartSelectionManager
Creates a tangent continuous edge method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createTangentFaceMethod(CAEFace, double) - Method in interface nxopen.cae.SmartSelectionManager
Creates a tangent face method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createTangentFaceMethod(CAEFace[], double) - Method in interface nxopen.cae.SmartSelectionManager
Creates a tangent face method
License requirements: nx_masterfem ("Finite Element Modeling")
.
createTaperFromEdges(Tag, String, boolean, int, Tag[]) - Method in interface nxopen.uf.UFModlFeatures
createTaperFromFaces(Tag, Tag, String, boolean, int, Tag[]) - Method in interface nxopen.uf.UFModlFeatures
createTaperFromTangentFaces(Tag, String, boolean, int, Tag[]) - Method in interface nxopen.uf.UFModlFeatures
createTaperSplitLine(Tag, Tag, String, boolean, int, Tag[], double, double) - Method in interface nxopen.uf.UFModlFeatures
createTargetCylArea(UFGdt.TargetCylArea) - Method in interface nxopen.uf.UFGdt
createTargetDiaArea(UFGdt.TargetDiaArea) - Method in interface nxopen.uf.UFGdt
createTargetLine(UFGdt.DatumTargetLine) - Method in interface nxopen.uf.UFGdt
createTargetPoint(UFGdt.DatumTargetPoint) - Method in interface nxopen.uf.UFGdt
createTargetPointBuilder(TargetPoint) - Method in interface nxopen.annotations.TargetPointCollection
Creates the TargetPointBuilder
License requirements: drafting ("DRAFTING")
.
createTargetRectArea(UFGdt.TargetRectArea) - Method in interface nxopen.uf.UFGdt
createTargetUdefArea(UFGdt.TargetUdefArea) - Method in interface nxopen.uf.UFGdt
createTbsOptimizationSolutionResult(TBSOptimizationSolution) - Method in interface nxopen.cae.ResultManager
Creates a solution result object given a
TBSOptimizationSolution
It is user's responsibility to destroy the result object once done
using
ResultManager.deleteResult(nxopen.cae.Result) , in order to free up system resources
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX8.0.1
Create a Teachmode Engage Settings.
createTeachmodeLinearMoveBuilder(Move) - Method in interface nxopen.cam.MoveCollection
Create a Teachmode Linear Move.
createTeachmodeProfileMoveBuilder(Move) - Method in interface nxopen.cam.MoveCollection
Create a Teachmode Profile Move.
createTeachmodeRetractSettingsBuilder(Move) - Method in interface nxopen.cam.MoveCollection
Create a Teachmode Retract Settings.
createTeachmodeTurningBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
Creates a teachmode turning operation builder
License requirements: cam_base ("CAM BASE")
.
createTempCsys(double[], Tag) - Method in interface nxopen.uf.UFCsys
createTemporaryLine(Point3d, Vector3d) - Method in interface nxopen.tooling.SectionLineCreationBuilder
Create temporary line
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
createTerminalsOption() - Method in interface nxopen.preferences.RoutingElectrical
Returns the create terminals option.
createText(Point2d, String) - Method in interface nxopen.markup.MarkupFileObjectCollection
Creates a nxopen.Markup.Text
License requirements: None.
createText(UFVariant, String) - Method in interface nxopen.uf.UFPath
createTextBuilder(Text) - Method in interface nxopen.features.FeatureCollection
Creates a
TextBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX7.5.1
Creates a Thicken feature builder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
.
createThickenSheet(Tag, String, String, UFModl.FeatureSigns) - Method in interface nxopen.uf.UFModl
createThicknessBuilder(Mesh) - Method in interface nxopen.cae.NodeElementInfoManager
Creates a builder for node element info command
License requirements: nx_masterfem ("Finite Element Modeling")
.
createThicknessDimensionBuilder(BaseConcentricCircleDimension) - Method in interface nxopen.annotations.DimensionCollection
createThicknessGraphicObjects(Point3d, Vector3d, double, NXColor) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
Create graphic objects for the thickness results.
createThicknessPlotContoursBuilder() - Method in interface nxopen.cae.NodeElementInfoManager
Creates a builder for plotting thickness contours
License requirements: nx_masterfem ("Finite Element Modeling")
.
createThreadedBossBuilder(NXObject[], double, double, NXObject, double, double, double, String, double, int, HoleBossGeom.FormTypes, String) - Method in interface nxopen.cam.HoleBossGeom
Create a new Thread Boss
License requirements: cam_base ("CAM BASE")
.
createThreadedHoleBuilder(NXObject[], double, double, NXObject, double, double, double, String, String, double, int, HoleBossGeom.FormTypes, String, String, int) - Method in interface nxopen.cam.HoleBossGeom
Create a new Thread Hole
License requirements: cam_base ("CAM BASE")
.
createThreadMillingBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
Creates a Thread Milling operation builder
License requirements: cam_base ("CAM BASE")
.
createThreadTurningBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
Creates a thread turning operation builder
License requirements: cam_base ("CAM BASE")
.
createThreadWire(UFVariant, String) - Method in interface nxopen.uf.UFPath
createThreeBendCornerFeatureBuilder(nxopen.features.Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
Create a NXSM Three Bend Corner feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
createThroughCurveMeshBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
createThroughCurvesBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
Creates a
ThroughCurvesBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX5.0.0
Create a polyline from points
License requirements: solid_modeling ("SOLIDS MODELING")
.
createThruCurves(UFModl.StringList, UFModl.StringList, int, int, double[], int, int, int, UFModl.FeatureSigns, double[], Tag[], int[]) - Method in interface nxopen.uf.UFModlFeatures
createTireEnvelopeBuilder(Feature) - Method in interface nxopen.features.AutomotiveCollection
createTireEnvelopeBuilder(TireEnvelope) - Method in interface nxopen.features.VehicleDesignCollection
Creates a
TireEnvelopeBuilder
License requirements: nx_general_packaging ("NX General Packaging")
Created in NX9.0.0
Returns the option to specify whether or not the tire envelope feature will be created.
createToolbar(String, int) - Method in interface nxopen.uf.UFUi
createToolBaseComponentBuilder(KinematicComponent) - Method in interface nxopen.sim.KinematicComponentCollection
Creates a bulder for tool base component.
createToolChange(UFVariant, UFPath.ToolChange, String) - Method in interface nxopen.uf.UFPath
createToolingBox() - Method in interface nxopen.tooling.TrimSolidBuilder
Creates the tooling box.
createToolingBoxBuilder(ToolingBox) - Method in interface nxopen.features.ToolingFeatureCollection
Creates a
ToolingBoxBuilder
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard") OR nx_freeform_2 ("advanced freeform modeling")
Created in NX10.0.0
Create Tool Path Divide builder
License requirements: cam_base ("CAM BASE")
.
createToolPathEditorBuilder() - Method in interface nxopen.cam.Operation
Create Tool Path Editor Move builder
License requirements: cam_base ("CAM BASE")
.
createToolPathSplitBuilder(CAMObject[]) - Method in interface nxopen.cam.CAMSetup
Create Tool Path Split by Holder builder
License requirements: cam_base ("CAM BASE")
.
createToolPathSplitItemBuilder() - Method in interface nxopen.cam.ToolPathSplitBuilder
The method to create the SplitToolPathItemBuilder
License requirements: cam_base ("CAM BASE")
.
createToolPathTiltBuilder(CAMObject[]) - Method in interface nxopen.cam.CAMSetup
Create Tool Path Tilt builder
License requirements: cam_base ("CAM BASE")
.
createToolPreselect(UFVariant, int, String) - Method in interface nxopen.uf.UFPath
createTooltipCsys() - Method in interface nxopen.sim.KinematicJunctionBuilder
Create the tooltip CSYS
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
createToolTrackingPointBuilder(Move) - Method in interface nxopen.cam.MoveCollection
Create Tracking Point Move.
createTopologyOptimizationSolutionBuilder(TBSTopologyOptimizationSolution) - Method in interface nxopen.cae.optimization.TBSOptimizationManager
createTopologyRestrictAreaBuilder(TBSTopologyRestrictArea) - Method in interface nxopen.cae.optimization.TBSOptimizationManager
Create the builder of
TBSRestrictAreaBuilder
License requirements: cae_opt_topo ("NX Topology Optimization")
Created in NX8.0.0
Returns the create trace lines flag
License requirements: None.
createTraceLinesBuilder(TraceLines) - Method in interface nxopen.features.ShipCollection
Creates a
TraceLinesBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
Created in NX7.5.0
Creates the trace link for system objects.
createTraceLinks(String[], String[], String[]) - Method in interface nxopen.pdm.RequirementUtils
Creates Trace Links from
Requirement s to
Part s
For the input requirement_item_numbers:
In case of Default Domain: it is Teamcenter item ID.
Create track changes data for drafing objects in the drawing part
License requirements: None.
createTrackingPoint(Tag, UFCutter.TrackingPointData) - Method in interface nxopen.uf.UFCutter
createTrackingPointChange(UFVariant, UFPath.TrackingPointChange) - Method in interface nxopen.uf.UFPath
createTransformCageData() - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
createTransformPathBuilder(NXObject[]) - Method in interface nxopen.routing.RouteManager
FIXME
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
createTransFrameBuilder(Feature) - Method in interface nxopen.features.ShipCollection
Create a TransFrameBuilder.
createTransFrameListItem() - Method in interface nxopen.features.shipdesign.TransFrameBuilder
Create a list containing all required info to generate transverse frame.
createTransientEventBuilder(DurabilityTransientEvent) - Method in interface nxopen.cae.DurabilityEventCollection
Creates the builder object of the durability transient event.
createTransientResultsReductionBuilder() - Method in interface nxopen.cae.ResultManager
Creates a transient results reduction builder.
createTransitionBuilder() - Method in interface nxopen.features.ShipCollection
Creates a
TransitionBuilder
License requirements: nx_ship_basic ("Ship Basic Design")
Created in NX8.5.0
Create a transition curve data builder object.
createTranslationalDdamExcitationBuilder(DDAMExcitation) - Method in interface nxopen.cae.responsesimulation.ExcitationCollection
Creates the builder object of
DDAMExcitation
License requirements: nx_response_anlys ("NX Response Analysis")
Created in NX5.0.0
Creates transmissibility evaluation setting object
License requirements: nx_response_anlys ("NX Response Analysis")
.
createTransportSurfaceBuilder(TransportSurface) - Method in interface nxopen.mechatronics.TransportSurfaceCollection
createTransverseBulkheadBuilder(TransverseBulkhead) - Method in interface nxopen.features.ShipCollection
createTrimAndExtendBuilder(TrimAndExtend) - Method in interface nxopen.features.TrimFeatureCollection
Creates a
TrimAndExtendBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX9.0.0
Creates a
TrimBody2Builder for Trim Body
feature
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX7.5.0
Creates a trim body builder object.
createTrimCornerBuilder(Feature) - Method in interface nxopen.features.BaseFeatureCollection
Creates a
TrimCornerBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX5.0.0
Creates a
TrimCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE")
Created in NX5.0.0
Creates a
TrimCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE")
Created in NX7.5.0
Creates a
TrimExtendBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
Created in NX5.0.0
Returns the create trimming marks
License requirements: None.
createTrimMoldComponentsBuilder() - Method in interface nxopen.tooling.TrimMoldComponentsCollection
Creates a TrimMoldComponents builder
License requirements: None.
createTrimRegionBuilder() - Method in interface nxopen.tooling.TrimRegionCollection
Creates a Trim Region builder
License requirements: None.
createTrimsheetBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
Creates a nxopen.features.TrimSheetBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
Created in NX5.0.0
createTrimSolidBuilder() - Method in interface nxopen.tooling.TrimSolidCollection
Creates a Trim Solid builder
License requirements: None.
createTrueShadingBuilder(TrueShading) - Method in interface nxopen.display.TrueShadingCollection
createTrueStudioBuilder(TrueStudio) - Method in interface nxopen.display.TrueStudioCollection
createTrueTaperFromEdges(Tag, String, boolean, int, Tag[], double, double) - Method in interface nxopen.uf.UFModlFeatures
createTSlot(double[], double[], double[], String, String, String, String, String, int, int, int) - Method in interface nxopen.uf.UFModl
createTube(Tag[], String[], UFModl.FeatureSigns) - Method in interface nxopen.uf.UFModl
createTube1(Tag[], String[], UFModl.FeatureSigns, Tag) - Method in interface nxopen.uf.UFModl
createTubeBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
Creates a
TubeBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
Created in NX5.0.0
Create a Turn Linear Move.
createTurnPartProbingBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
Creates a turn part probing operation builder
License requirements: cam_base ("CAM BASE")
.
createTurnProbeClearanceBuilder(Move) - Method in interface nxopen.cam.MoveCollection
Create a Turn Probe Clearance Move.
createTurnProbeInspectPointMoveBuilder(Move) - Method in interface nxopen.cam.MoveCollection
Create a Turn Probe Inspect Point Move.
createTurnToolProbingBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
Creates a turn tool probing operation builder
License requirements: cam_base ("CAM BASE")
.
createTurnTrackingPoint(Tag, UFCutter.TurnTrackingPointData) - Method in interface nxopen.uf.UFCutter
createTwoExpressionsCollectorSet(ScCollector, String, String, String, int) - Method in interface nxopen.Part
Creates an TwoExpressionCollectorSet item that contains
a
ScCollector collection
and two corresponding expressions
License requirements: None.
Creates an TwoExpressionSectionSet item that contains
a
Section section
and two corresponding expressions
License requirements: None.
Sets the creator for Ude
License requirements: cam_base ("CAM BASE")
.
createUdeByName(String) - Method in interface nxopen.cam.UdeSet
The function to add Ude
License requirements: cam_base ("CAM BASE")
.
createUdeMoveBuilder(Move) - Method in interface nxopen.cam.MoveCollection
Create a UDE Move.
createUGroove(double[], double[], String, String, String, Tag) - Method in interface nxopen.uf.UFModlFeatures
createUgs2dMesh(UFSf.Ugs2dMeshParms, int, Tag[]) - Method in interface nxopen.uf.UFSf
createUgs2dMeshWithHdpts(UFSf.Ugs2dMeshParms, int, Tag[], int, Tag[]) - Method in interface nxopen.uf.UFSf
createUgs2dMeshWtAbstractionControl(UFSf.Ugs2dMeshParms, UFSf.UgsMeshAbstractionParams, int, Tag[]) - Method in interface nxopen.uf.UFSf
createUgsTetMesh(UFSf.UgsTetMeshParms, int, Tag[]) - Method in interface nxopen.uf.UFSf
createUgsTetMeshWtAbstractionControl(UFSf.UgsTetMeshParms, UFSf.UgsMeshAbstractionParams, int, Tag[], int) - Method in interface nxopen.uf.UFSf
createUnbend(UFNxsm.UnbendData) - Method in interface nxopen.uf.UFNxsm
createUnbendFeatureBuilder(nxopen.features.Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
Create a NXSM Unbend feature builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
createUncutRegionsBuilder() - Method in interface nxopen.die.DieCollection
createUndersizeBuilder() - Method in interface nxopen.tooling.UndersizeCollection
Creates undersize object
License requirements: None.
createUnfoldedMinRecBuilder() - Method in interface nxopen.features.ShipCollection
Creates a Features.ShipDesign.UnfoldedMinRecBuilder.
createUnfoldedSxview(Tag, double, double[], double[], Tag, int, UFDraw.SxlineSxsegs[], double[]) - Method in interface nxopen.uf.UFDraw
createUnfoldingSimulationBuilder() - Method in interface nxopen.tooling.ProgressiveDieManager
createUnformBuilder(nxopen.features.Feature) - Method in interface nxopen.features.sheetmetal.AeroSheetmetalManager
Create unform builder
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
createUniformScale(Tag, int, String) - Method in interface nxopen.uf.UFModeling
createUniformScaledConstraint(Sketch.ConstraintGeometry) - Method in interface nxopen.Sketch
Creates a uniform scale constraint
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
createUnifyPathBuilder(NXObject[]) - Method in interface nxopen.routing.RouteManager
createUnionDofset(String, CaeDOFSet[]) - Method in interface nxopen.cae.CaeDOFSetCollection
Create a Union of DOFSets
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
createUniteFeature(Body, boolean, Body[], boolean, boolean) - Method in interface nxopen.features.FeatureCollection
Creates a unite feature.
CreateUniteFeatureData() - Constructor for class nxopen.features.FeatureCollection.CreateUniteFeatureData
createUniversalUnformBuilder(UniversalUnform) - Method in interface nxopen.features.ToolingCollection
Creates a
UniversalUnformBuilder
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
Created in NX8.5.0
Creates a
UnsewBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX5.0.0
Creates a
UnStitchEdgeBuilder
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX6.0.0
Creates a
UntrimBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX5.0.0
Returns the create untrimmed margins
License requirements: None.
createUnusedFileManagementBuilder() - Method in interface nxopen.tooling.UnusedFileManagementCollection
Creates Unused File Management builder.
createUpdateDesignElementPositionBuilder(Part) - Method in interface nxopen.CollaborativeContentManager
createUpdateFormboardBuilder() - Method in interface nxopen.formboard.FormboardManager
Creates a
UpdateFormboardBuilder that compares and
updates formboard geometry to match a modified master 3D harness.
Creates the Update Views Builder
License requirements: drafting ("DRAFTING")
.
createUrlBusinessModifier(String) - Method in interface nxopen.annotations.BusinessModifierCollection
createUrlBusinessModifierBuilder(UrlBusinessModifier) - Method in interface nxopen.annotations.BusinessModifierCollection
createUserDefinedDieInsert() - Method in interface nxopen.tooling.PiercingInsertBuilder
Create user defined die insert or backing insert for selected scraps.
createUserDefinedInsert(String) - Method in interface nxopen.tooling.GeneralInsertBuilder
Creates user defined insert.
createUserDefinedInsertDatumPlane() - Method in interface nxopen.tooling.PiercingInsertBuilder
Create datum plane for user defined die or backing insert outline.
createUserDefinedMoveBuilder(Move, String) - Method in interface nxopen.cam.MoveCollection
Create User Defined Move.
createUserDefinedObject(UserDefinedClass) - Method in interface nxopen.userdefinedobjects.UserDefinedObjectManager
Constructs a new nxopen.features.UserDefinedObjectFeature .
createUserDefinedObjectClass(String, String) - Method in interface nxopen.userdefinedobjects.UserDefinedClassManager
createUserDefinedObjectFeatureBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
Creates a UserDefinedObjectFeature builder
License requirements: None.
createUserDefinedSection() - Method in interface nxopen.die.AddendumSectionUserDefinedBuilder
createUserDefinedSolidBeamSectionBuilder(UserDefinedSolidBeamSection) - Method in interface nxopen.cae.BeamSectionCollection
Creates a user-defined solid section builder.
createUserDefinedWeldBuilder(nxopen.features.Feature) - Method in interface nxopen.weld.WeldManager
createUserdefMidsrf(UFSf.MidsrfUserParms) - Method in interface nxopen.uf.UFSf
createUserGroupFromEntityLabels(int, CaeGroupCollection.EntityType, int[]) - Method in interface nxopen.cae.Post
Create a User Group using element or node labels.
createUsertool(int, String, boolean) - Method in interface nxopen.uf.UFUi
createUSlot(double[], double[], double[], String, String, String, String, Tag, Tag, Tag) - Method in interface nxopen.uf.UFModl
createValidator(String) - Method in interface nxopen.validate.ValidationManager
Creates a validator.
createValidCheckBuilder() - Method in interface nxopen.tooling.ValidCheckCollection
Creates a
ValidCheckBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX6.0.0
This function will get all the paths stored in
ManualRouteBuilder and
will create point for any location which lies on any of the paths.
Creates a
VariableOffsetBuilder
License requirements: studio_free_form ("STUDIO FREE FORM")
Created in NX8.0.0
Creates a Varsweep feature builder
License requirements: solid_modeling ("SOLIDS MODELING")
.
createVazlMillingBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
Creates a planar milling vazl operation builder
License requirements: cam_base ("CAM BASE")
.
createVectorDistanceMoveBuilder(Move) - Method in interface nxopen.cam.MoveCollection
Create a Vector Distance Move.
createVectorFieldWrapperWithExpressions(Expression[]) - Method in interface nxopen.fields.FieldManager
Create a vector field wrapper backed by three scalar expressions
License requirements: None.
createVectorFieldWrapperWithField(Field, double[]) - Method in interface nxopen.fields.FieldManager
Create a vector field wrapper backed up by a scaled vector field
License requirements: None.
createVectorForceBuilder(VectorForce) - Method in interface nxopen.motion.VectorForceCollection
Creates a
JointDriverBuilder
License requirements: mechanisms ("MECHANISMS")
Created in NX5.0.0
Creates a
JointDriverBuilder
License requirements: mechanisms ("MECHANISMS")
Created in NX5.0.0
Creates a
VehicleCoordinateSystemBuilder
License requirements: nx_general_packaging ("NX General Packaging") OR ug_body_design ("Body Design") OR nx_posture ("NX Jack Posture Prediction")
Created in NX9.0.0
Creates the builder object of
VelocityImpactExcitation
License requirements: nx_response_anlys ("NX Response Analysis")
Created in NX6.0.0
Creates a
VentHolesMarkingBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
Created in NX5.3.0
Creates a
VerifyPenetrationBuilder
License requirements: nx_penetration_mgmt ("Penetration Management")
Created in NX8.5.0
Creates a vertical baseline dimension.
createVerticalBaselineDimension(UFDrf.Object[], int, double[]) - Method in interface nxopen.uf.UFDrf
createVerticalChainDimension(DimensionData, Point3d) - Method in interface nxopen.annotations.DimensionSetCollection
Creates a vertical chain dimension.
createVerticalChainDimension(UFDrf.Object[], int, double[]) - Method in interface nxopen.uf.UFDrf
createVerticalConstraint(Sketch.ConstraintGeometry) - Method in interface nxopen.Sketch
Creates a vertical constraint
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
createVerticalDim(UFDrf.Object, UFDrf.Object, UFDrf.Text, double[]) - Method in interface nxopen.uf.UFDrf
createVerticalDimension(DimensionData, Point3d) - Method in interface nxopen.annotations.DimensionCollection
Creates a vertical dimension
License requirements: drafting ("DRAFTING")
.
createVerticalMargin(OrdinateOriginDimension, Associativity, double) - Method in interface nxopen.annotations.OrdinateMarginCollection
Creates a vertical ordinate margin object
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
createVerticalOrdinateAutoDimension(DimensionData, Point3d, boolean, boolean) - Method in interface nxopen.annotations.DimensionCollection
Creates a vertical ordinate automatic dimension
License requirements: drafting ("DRAFTING")
.
createVerticalOrdinateDimension(DimensionData, Point3d) - Method in interface nxopen.annotations.DimensionCollection
Creates a vertical ordinate dimension
License requirements: drafting ("DRAFTING")
.
createView(String, double) - Method in interface nxopen.tooling.AssemblyDrawingBuilder
Create view
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
createViewAlignmentBuilder() - Method in interface nxopen.drawings.ViewAlignmentCollection
createViewCreationWizardBuilder() - Method in interface nxopen.drawings.DraftingViewCollection
createViewDrapingResultsBuilder(LaminateGlobalLayup, LaminatePly) - Method in interface nxopen.cae.LaminateGlobalLayupMgr
Creates a
FlatPatternsBuilder
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
Created in NX6.0.0
Returns the flag indicating whether the PMI would be created view independent
License requirements: None.
createViewLabel(Tag, UFDraw.ViewLabelParms) - Method in interface nxopen.uf.UFDraw
createViewLaminateBuilder(Laminate, int) - Method in interface nxopen.cae.LaminateGlobalLayupMgr
Creates a
ViewLaminateBuilder
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
Created in NX6.0.0
Create a
ViewSection object
License requirements: None.
Create view to show components
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
createViolation(Tag, String, String, int, Tag[], int) - Method in interface nxopen.uf.UFRule
createVirtualAxisBuilder(VirtualAxis) - Method in interface nxopen.mechatronics.VirtualAxisCollection
createVirtualBlendCurve(SmartObject.UpdateOption, IParameterizedSurface, double) - Method in interface nxopen.CurveCollection
createVirtualBlendEdgeBuilder() - Method in interface nxopen.features.FeatureCollection
createVirtualCenterlineCurve(SmartObject.UpdateOption, IParameterizedSurface, double) - Method in interface nxopen.CurveCollection
createVirtualCurveBuilder(VirtualCurve) - Method in interface nxopen.features.FeatureCollection
Creates a
VirtualCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX7.5.0
Creates a
Point at the virtual intersection of two linear Edges or Curves.
Creates a
VisionPlaneBuilder
License requirements: nx_general_packaging ("NX General Packaging")
Created in NX9.0.0
Creates a nxopen.visualreporting.VisualReportBuilder and starts
editing a copy of the given nxopen.visualreporting.VisualReport .
createVolumeBased25dMillingOperationBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
Creates a volume based 25D milling operation builder
License requirements: cam_base ("CAM BASE")
.
createVrmlFile(String, double, int) - Method in interface nxopen.uf.UFStd
createVrmlImporter() - Method in interface nxopen.ImportManager
Creates a VRML importer object.
createWall(View, Stage.WallType) - Method in interface nxopen.ViewCollection
Creates a
Wall
License requirements: None.
Creates a Wavedatum Builder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT")
.
createWaveInterfaceLinkerBuilder(Feature) - Method in interface nxopen.features.BaseFeatureCollection
createWaveLinkBuilder(Feature) - Method in interface nxopen.features.BaseFeatureCollection
Creates a
WaveLinkBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX5.0.0
Create the link repository to handle interpart selection
License requirements: None.
createWavePointBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
Creates a
WavePointBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
Created in NX5.0.0
Creates a
WaveRoutingBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX5.0.0
Creates a Wavesketch Builder
License requirements: solid_modeling ("SOLIDS MODELING")
.
createWedmMachineControlBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
Creates a wire edm machine control operation builder
License requirements: cam_base ("CAM BASE")
.
createWedmOperationBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
Creates a WEDM operation builder
License requirements: cam_base ("CAM BASE")
.
createWedmUserDefinedBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
Creates a wire edm user defined operation builder
License requirements: cam_base ("CAM BASE")
.
createWeightAndCgBuilder() - Method in interface nxopen.features.ShipCollection
Creates a Features.ShipDesign.WeightAndCGBuilder.
createWeldAdvisorBuilder() - Method in interface nxopen.weld.WeldManager
createWeldBeadBuilder(nxopen.features.Feature) - Method in interface nxopen.weld.WeldManager
createWeldBuilder(Mesh) - Method in interface nxopen.cae.MeshManager
Creates a
WeldBuilder
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX7.5.2
Creates a
WeldCut2Builder
License requirements: nx_ship_detail ("Ship Detail Design")
Created in NX8.0.1
Creates a
WeldCutBuilder
License requirements: nx_ship_concept ("Ship Concept")
Created in NX7.5.0
The welding annotation to edit, otherwise if null, then create a new one
License requirements: ugweld ("UG WELD") OR structure_weld ("STRUCTURE WELD")
.
createWeldMesh(UFSf.Sf1dMeshData, UFSf.OrientationData, int, Tag[], int, Tag[], int, Tag) - Method in interface nxopen.uf.UFSf
createWeldObjectBuilder() - Method in interface nxopen.weld.WeldManager
createWeldPmiBuilder() - Method in interface nxopen.weld.WeldManager
createWeldPointBuilder(nxopen.features.Feature) - Method in interface nxopen.weld.WeldManager
createWeldPointExitBuilder() - Method in interface nxopen.weld.WeldManager
createWeldSymbol(double[], UFDrf.LeaderAttachType, UFDrf.Object, double[], UFDrf.WeldSymbols) - Method in interface nxopen.uf.UFDrf
createWheelCoveringBuilder(Feature) - Method in interface nxopen.features.AutomotiveCollection
createWheelCoveringBuilder(WheelCovering) - Method in interface nxopen.features.VehicleDesignCollection
Creates a
WheelCoveringBuilder
License requirements: nx_general_packaging ("NX General Packaging")
Created in NX9.0.0
Creates a
WheelFixingBuilder
License requirements: nx_general_packaging ("NX General Packaging")
Created in NX9.0.0
Creates and returns a
WidthDefinition object representing
the Width Palette.
Creates and returns a
WidthDefinition object representing the
Width Palette.
Creates and returns a
WidthDefinition object representing
the Width Palette.
Creates an HVAC Wind Catcher builder.
createWindshieldDatumBuilder(Feature) - Method in interface nxopen.features.AutomotiveCollection
createWindshieldDatumBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
createWindshieldDatumBuilder(WindshieldDatum) - Method in interface nxopen.features.VehicleDesignCollection
Creates a
WindshieldDatumBuilder
License requirements: nx_general_packaging ("NX General Packaging")
Created in NX9.0.0
Creates a wire object.
createWireAngle(UFVariant, double, double, boolean, String) - Method in interface nxopen.uf.UFPath
createWireCutcom(UFVariant, UFPath.CutcomMode, int, boolean, boolean, String) - Method in interface nxopen.uf.UFPath
createWireGuide() - Method in interface nxopen.cam.WireTool
Create a wire guide
License requirements: cam_base ("CAM BASE")
.
createWireGuides(UFVariant, String) - Method in interface nxopen.uf.UFPath
createWireHoleBuilder() - Method in interface nxopen.tooling.WireHoleCollection
Creates wire hole builder
License requirements: None.
createWithOffset(Tag, Tag) - Method in interface nxopen.uf.UFPoint
createWithPad() - Method in interface nxopen.die.HoleChildBuilder
Returns the create with pad switch of the die hole, if true a pad will be created around the hole, if false the pad will not be created.
createWithPad() - Method in interface nxopen.die.HoleParentBuilder
Returns the create with pad switch of die holes, if true a pad will be created around the holes, if false the pad will not be created.
createWithPad() - Method in interface nxopen.die.KeywayBuilder
Returns the value, true or false) to decide if the pad should be created for the keyway
License requirements: None.
createWithParameter(double, double, double, double) - Method in interface nxopen.cam.UdtSectionBuilder
Create a new udt section item with parameter
License requirements: cam_base ("CAM BASE")
.
createWithUnits(String, Unit) - Method in interface nxopen.ExpressionCollection
Creates an expression with units.
createWorkingPart(CloneObject, TaggedObject) - Method in interface nxopen.tooling.ElectrodeInitializationBuilder
Creates the working part.
createWorkpieceBuilder() - Method in interface nxopen.tooling.WorkpieceCollection
Creates Workpiece builder
License requirements: None.
createWrapAroundDistanceLines() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
Returns the setting to indicate if the wrap around distance lines should be created,
true they will be created, false they will not be created.
createWrapAssembly(UFModl.WrapAssem) - Method in interface nxopen.uf.UFModeling
createWrapBuilder(WrapUnwrap) - Method in interface nxopen.features.FeatureCollection
Creates a
WrapBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX6.0.0
Creates a
WrapGeometryBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
Created in NX6.0.0
Returns the option whether to create X dimensions
License requirements: None.
createXform(Point3d, Vector3d, Vector3d, SmartObject.UpdateOption, double) - Method in interface nxopen.XformCollection
Creates a Xform without parameters.
createXform(Point3d, Matrix3x3, SmartObject.UpdateOption, double) - Method in interface nxopen.XformCollection
Creates an Xform
License requirements: None.
createXform(SmartObject.UpdateOption, double) - Method in interface nxopen.XformCollection
Creates a Xform that based off the model space coordinate system.
createXform(Point, Point, Point, SmartObject.UpdateOption, double) - Method in interface nxopen.XformCollection
Create a Xform based on three points.
createXform(DisplayableObject, DisplayableObject, DisplayableObject, SmartObject.UpdateOption, double) - Method in interface nxopen.XformCollection
Creates a Xform by three planes.
createXform(CoordinateSystem, Point, Point, Scalar, Scalar, Scalar, int, SmartObject.UpdateOption, double) - Method in interface nxopen.XformCollection
Creates a Xform by picking up a point from an existing coordinate system
License requirements: None.
createXform(CoordinateSystem, Offset, Offset, Scalar, Scalar, Scalar, int, SmartObject.UpdateOption, double) - Method in interface nxopen.XformCollection
Creates a Xform by offsetting an existing coordinate system through
a translation and a rotation
License requirements: None.
createXform(Point, Direction, Direction, SmartObject.UpdateOption, double) - Method in interface nxopen.XformCollection
Creates a Xform based on a point and two vectors.
createXform(Direction, Direction, SmartObject.UpdateOption, double) - Method in interface nxopen.XformCollection
Creates a Xform based on two vectors.
createXform(DisplayableObject, Direction, SmartObject.UpdateOption, double) - Method in interface nxopen.XformCollection
Creates a Xform based on a plane and a vector.
createXform(Point, Axis, SmartObject.UpdateOption) - Method in interface nxopen.XformCollection
Creates an Xform using a Z axis and X point
The X-Axis is the vector from the Z-Axis vector to the point;
the Y-Axis is computed from the X and Z axis; the origin is the
intersection of the three vectors.
createXform(Point, Point, ICurve, SmartObject.UpdateOption) - Method in interface nxopen.XformCollection
Creates an Xform through a point and perpendicular to a curve or edge.
createXform(Component, Component, SmartObject.UpdateOption) - Method in interface nxopen.XformCollection
Creates a Xform in the context of given
Component .
Creates a Xform from the Xform of a a selected curve, plane, or drafting object.
createXform(NXObject, Explosion, SmartObject.UpdateOption) - Method in interface nxopen.XformCollection
Creates an Xform based on an object and an explosion.
createXform(Explosion, Component, Component, SmartObject.UpdateOption) - Method in interface nxopen.XformCollection
Creates an Xform based on the delta difference between the source and
destination components in the explosion.
createXform(Point, XYZAxis, Direction, Scalar, SmartObject.UpdateOption) - Method in interface nxopen.XformCollection
Creates an Xform based on origin and a direction.
createXformAngleAxis(Axis, Expression, SmartObject.UpdateOption) - Method in interface nxopen.XformCollection
Creates a Motion Xform based on the axis and angle.
createXformAssyCtxt(Tag, Tag, Tag) - Method in interface nxopen.uf.UFSo
createXformAxisVector(Axis, Direction, SmartObject.UpdateOption) - Method in interface nxopen.XformCollection
Creates a Motion Xform based on a axis and vector.
createXformByDynamicOffset(CoordinateSystem, Vector3d, Matrix3x3, SmartObject.UpdateOption, double) - Method in interface nxopen.XformCollection
Creates an Xform whose location and orientation are determined by applying
a specified origin offset and transformation matrix to an existing coordinate system.
createXformByPlaneXDirPoint(DisplayableObject, Direction, Point, SmartObject.UpdateOption, double, boolean, boolean) - Method in interface nxopen.XformCollection
Creates a Xform based on a planar face or datum plane, a X-axis vector direction, and a point.
createXformByPointXDirZDir(Point, Direction, Direction, SmartObject.UpdateOption, double) - Method in interface nxopen.XformCollection
Creates an Xform based on a point and two vectors.
createXformByPointYDirZDir(Point, Direction, Direction, SmartObject.UpdateOption, double) - Method in interface nxopen.XformCollection
Creates an Xform based on a point and two vectors.
createXformCsysToCsys(CoordinateSystem, CoordinateSystem, SmartObject.UpdateOption) - Method in interface nxopen.XformCollection
Creates a Motion Xform based on two csys.
createXformDeltaXyz(Scalar[], SmartObject.UpdateOption) - Method in interface nxopen.XformCollection
Creates a Motion Xform based on delta x, y, and z values where the x, y, and z
directions are relative to a reference coordinate system.
createXformDistanceAngle(Expression, Expression, Axis, Direction, SmartObject.UpdateOption) - Method in interface nxopen.XformCollection
Creates a Motion Xform based on the distance and angle on object.
createXformDistanceBetweenPoints(Point, Point, Direction, Expression, Expression, SmartObject.UpdateOption) - Method in interface nxopen.XformCollection
Creates a Motion Xform based on the direction and points.
createXformDistanceDirection(Direction, Expression, SmartObject.UpdateOption) - Method in interface nxopen.XformCollection
Creates a Motion Xform based on the direction and distance.
createXformDistanceRadial(Axis, Point, Expression, Expression, SmartObject.UpdateOption) - Method in interface nxopen.XformCollection
Creates a Motion Xform based on the axis and points.
createXformDoubles(Tag, UFSo.UpdateOption, double[], double[], double[], double) - Method in interface nxopen.uf.UFSo
createXformDynamic(Scalar[], Scalar[], SmartObject.UpdateOption) - Method in interface nxopen.XformCollection
Creates a Motion Xform based on the manip.
createXformExtract(Tag, UFSo.UpdateOption, Tag, Tag) - Method in interface nxopen.uf.UFSo
createXformFromCurrentView(SmartObject.UpdateOption, double) - Method in interface nxopen.XformCollection
Creates an XForm using the current viewing coordinate system.
createXformOffsetXform(Tag, UFSo.UpdateOption, Tag, Tag, Tag, Tag[], Tag) - Method in interface nxopen.uf.UFSo
createXformPntXyDirs(Tag, UFSo.UpdateOption, Tag, Tag, Tag, Tag) - Method in interface nxopen.uf.UFSo
createXformPntXzDirs(Tag, UFSo.UpdateOption, Tag, Tag, Tag, Tag) - Method in interface nxopen.uf.UFSo
createXformPntYzDirs(Tag, UFSo.UpdateOption, Tag, Tag, Tag, Tag) - Method in interface nxopen.uf.UFSo
createXformRotateThreePoints(Axis, Point, Point, SmartObject.UpdateOption) - Method in interface nxopen.XformCollection
Creates a Motion Xform based on the three points and vector.
createXformThreePlanes(Tag, UFSo.UpdateOption, Tag, Tag, Tag, Tag) - Method in interface nxopen.uf.UFSo
createXformThreePoints(Tag, UFSo.UpdateOption, Tag, Tag, Tag, Tag) - Method in interface nxopen.uf.UFSo
createXformTwoPoints(Point, Point, SmartObject.UpdateOption) - Method in interface nxopen.XformCollection
Creates a Motion Xform based on two points.
createXformWithReverseNormal(Xform, SmartObject.UpdateOption) - Method in interface nxopen.XformCollection
Creates an Xform based on the delta difference between the source and
destination components in the explosion.
createXformWithView(View, SmartObject.UpdateOption) - Method in interface nxopen.XformCollection
Creates a Xform with an existing view
License requirements: None.
createXhatch(int, int, int[], Tag[]) - Method in interface nxopen.uf.UFDrf
CreateXhatchData() - Constructor for class nxopen.uf.UFDrf.CreateXhatchData
createYDimensions() - Method in interface nxopen.tooling.AutoDimensionBuilder
Returns the option whether to create Y dimensions
License requirements: None.
createYFrameBuilder(Feature) - Method in interface nxopen.features.ShipCollection
Creates a
YFrameBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
Created in NX5.0.0
Creates a
ZFrameBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
Created in NX5.0.0
Creates a planar milling z level operation builder
License requirements: cam_base ("CAM BASE")
.
createZoneLabels() - Method in interface nxopen.drawings.BordersAndZonesBuilder
createZoneLabels() - Method in interface nxopen.drawings.SheetZoneSettingsBuilder
Returns the create zone labels
License requirements: None.
createZoneMarking() - Method in interface nxopen.drawings.BordersAndZonesBuilder
createZoneMarkings() - Method in interface nxopen.drawings.SheetZoneSettingsBuilder
Returns the create zone markings
License requirements: None.
createZones() - Method in interface nxopen.drawings.SheetZoneSettingsBuilder
Returns the create zones
License requirements: None.
CREATION - Static variable in class nxopen.features.shipdesign.StandardPartFrameworkBuilder.CreationType
In creation
CREATION - Static variable in class nxopen.weld.WeldOverlapStatus
create overlap
creationDirection() - Method in interface nxopen.weld.DatumCommonBuilder
Returns the creation direction.
creationDirection() - Method in interface nxopen.weld.WeldPointBuilder
Returns the creation direction type.
creationMask - Variable in class nxopen.uf.UFDrf.SymbolInstance
creationMethod() - Method in interface nxopen.cam.SpunOutlineGeom
Returns the creation method
License requirements: None.
CreationMethod - Class in nxopen.routing
Describes the overstock creation method.
creationMethod - Variable in class nxopen.uf.UFCurve.AskJoinedParmsData
creationType() - Method in interface nxopen.cae.Mesh3dHexBuilder
Returns the type of hex mesh
License requirements: nx_masterfem ("Finite Element Modeling")
.
creationVersion - Variable in class nxopen.uf.UFObj.AskCreModVersionsData
creChamferWithFlipOption(int, String, String, String, Tag[], boolean) - Method in interface nxopen.uf.UFModeling
creChamferWithInstanceAndFlipOption(int, String, String, String, Tag[], boolean, boolean) - Method in interface nxopen.uf.UFModeling
creDefFacepairFeat(Tag, Tag, Tag, Tag[], Tag[]) - Method in interface nxopen.uf.UFModeling
CREEP_STRAIN - Static variable in class nxopen.cae.Result.Quantity
CREEP_STRAIN_AT_ELEMENT_INTEGRATION_POINT - Static variable in class nxopen.cae.Result.Quantity
creSelFacepairFeat(Tag, Tag, Tag[], Tag[]) - Method in interface nxopen.uf.UFModeling
CreSettings() - Constructor for class nxopen.uf.UFObj.CreSettings
CreSettings(int, int, int) - Constructor for class nxopen.uf.UFObj.CreSettings
crestLine() - Method in interface nxopen.cam.ThreadTurningBuilder
Returns the Crest Line
License requirements: None.
crestLineDirection() - Method in interface nxopen.cam.ThreadTurningBuilder
Returns the Crest Line Direction(Start and End Points)
License requirements: None.
crestOffset() - Method in interface nxopen.cam.ThreadTurningBuilder
Returns the crest offset builder
License requirements: None.
creTextBlock(int, int, double[], int, String[]) - Method in interface nxopen.uf.UFDrf
creTrimBsurf(int, int, int, int, double[], double[], double[], int, int[], int[], Tag[], int, double) - Method in interface nxopen.uf.UFModlGeneral
CreTrimBsurfData() - Constructor for class nxopen.uf.UFModlGeneral.CreTrimBsurfData
CRIT_VALUE_TYPE_DOUBLE - Static variable in class nxopen.uf.UFFbmGeom.CritValueType
CRIT_VALUE_TYPE_INTEGER - Static variable in class nxopen.uf.UFFbmGeom.CritValueType
CRIT_VALUE_TYPE_LOGICAL - Static variable in class nxopen.uf.UFFbmGeom.CritValueType
CRIT_VALUE_TYPE_STRING - Static variable in class nxopen.uf.UFFbmGeom.CritValueType
CRIT_VALUE_TYPE_UNDEFINED - Static variable in class nxopen.uf.UFFbmGeom.CritValueType
CriteriaData() - Constructor for class nxopen.assemblies.AttributeSearchTermBuilder.CriteriaData
criteriaList() - Method in interface nxopen.annotations.SearchModelViewBuilder
Returns the criteria list
License requirements: None.
criteriaList - Variable in class nxopen.uf.UFFbmGeom.AskAvailableCriteriaData
criteriavalue - Variable in class nxopen.cae.modelcheck.ITestValue.CriteriaValueData
CriteriaValueData() - Constructor for class nxopen.cae.modelcheck.ITestValue.CriteriaValueData
criterion - Variable in class nxopen.cae.Result.ElementValue
CRITICAL - Static variable in class nxopen.die.FlangeTaskBuilder.PierceTypes
Use Critical tolerance.
CRITICAL - Static variable in class nxopen.die.PierceTaskBuilder.PrecisionTypes
Critical hole
CRITICAL_DEPTH - Static variable in class nxopen.cam.CutLevelPlanar.Types
Critical Depths
CRITICAL_PLANE - Static variable in class nxopen.cae.DurabilityStrainGageAnalyzerBuilder.AxisDirectionSearchMethodEnum
Critical Plane
CRITICAL_PLANE - Static variable in class nxopen.cae.DurabilityStressAxesBuilder.StressAxisDirectionSearchMethodEnum
Critical Plane
criticalPlaneOption() - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder
Returns the critical plane option.
crnObj - Variable in class nxopen.uf.UFRoute.AskObjCornerInfoData
crnRcp - Variable in class nxopen.uf.UFRoute.AskObjCornerInfoData
crnTyp - Variable in class nxopen.uf.UFRoute.AskObjCornerInfoData
CROSS - Static variable in class nxopen.annotations.LeaderData.ArrowheadType
Cross symbol
CROSS - Static variable in class nxopen.cae.MarkerType0d
CROSS - Static variable in class nxopen.cae.ModelDisplayBuilder.FreeEdgeMarker
Cross marker
CROSS - Static variable in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeMarker
Cross marker
CROSS - Static variable in class nxopen.cae.xyplot.PointMarker
Cross marker
CROSS - Static variable in class nxopen.features.ThroughCurveMeshBuilder.EmphasisType
Emphasis on cross strings.
CROSS - Static variable in class nxopen.fields.DisplayPropertiesBuilder.IndepDomDispType
CROSS - Static variable in class nxopen.fields.DisplayPropertiesBuilder.ValuesEnum
CROSS - Static variable in class nxopen.preferences.SessionModeling.EndpointDisplayStyleType
CROSS - Static variable in class nxopen.preferences.SessionModeling.PoleDisplayStyleType
CROSS - Static variable in class nxopen.preferences.SessionModeling.PoleEditStyleType
CROSS - Static variable in class nxopen.preferences.SubdivisionModelingPreferences.VertexStyleTypes
cross(double[], double[]) - Method in interface nxopen.uf.UFVec2
cross(double[], double[]) - Method in interface nxopen.uf.UFVec3
CROSS_ARROW - Static variable in class nxopen.annotations.ArrowheadType
CROSS_ARROW - Static variable in class nxopen.uf.UFDrf.ArrowheadAndFillType
CROSS_HOLE - Static variable in class nxopen.cam.CenterlineDrillTurningBuilder.DepthTypes
Depth options: Cross Hole
CROSS_HOLE_DIMENSIONS - Static variable in class nxopen.cam.CenterlineDrillTurningBuilder.DepthTypes
Depth options: Cross Hole Dimensions
CROSS_MIN_STRING_2 - Static variable in class nxopen.uf.UFConstants
CROSS_SECTION_CENTERS - Static variable in class nxopen.cam.InspectionMethodBuilder.CylinderFittingTypes
Cross Section Centers
CROSS_SPECTRUM - Static variable in class nxopen.cae.XyFunctionDataType
Function is Cross Spectrum
CROSS_SPECTRUM - Static variable in class nxopen.cae.XyFunctionGeneralType
Function is Cross Spectrum
CROSS_SPECTRUM - Static variable in class nxopen.cae.XyFunctionResponseType
Function is Cross Spectrum
crossBoundaryMode - Variable in class nxopen.uf.UFCurve.OcfData
crossCurveList() - Method in interface nxopen.cam.DPMItpBuilder
Returns the Cross Curve List
License requirements: None.
crossCurvesList() - Method in interface nxopen.features.ThroughCurveMeshBuilder
Returns the cross curves list which is required.
CROSSCUT_ZIG - Static variable in class nxopen.cam.CutPatternBuilder.Types
Crosscut Zig
CROSSCUT_ZIG_ZAG - Static variable in class nxopen.cam.CutPatternBuilder.Types
Crosscut Zig Zag
CROSSCUT_ZIG_ZAG_WITH_LIFTS - Static variable in class nxopen.cam.CutPatternBuilder.Types
Crosscut Zig Zag with Lifts
crossDegree() - Method in interface nxopen.SurfaceRebuildData
Returns
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
CROSSHATCH - Static variable in class nxopen.annotations.HatchBuilder.AnnotationTypes
Deprecated.
Crosshatch
CROSSHATCH - Static variable in class nxopen.annotations.HatchFillSettingsBuilder.AnnotationTypes
Crosshatch
CROSSHATCH - Static variable in class nxopen.annotations.PmiFilterByType.Type
Indicates a PMI crosshatch type
crossHatch() - Method in interface nxopen.drawings.BrokenViewBuilder
Returns the HatchFillSetting
License requirements: None.
crossHatch() - Method in interface nxopen.drawings.SectionViewStyle
Returns the status of cross hatch.
crosshatch() - Method in interface nxopen.drawings.ViewStyleSectionBuilder
Returns the crosshatch toggle on the SECTION tab of the View Style Dialog
License requirements: None.
crossHatch() - Method in interface nxopen.preferences.SectionViewPreferences
Returns the status of cross hatch.
crosshatchAdjacencyTolarance() - Method in interface nxopen.drawings.SectionViewStyle
Returns the value of crosshatch adjacency tolarance.
crosshatchAdjacencyTolarance() - Method in interface nxopen.preferences.SectionViewPreferences
Returns the value of crosshatch adjacency tolarance.
crosshatchAdjacencyTolerance() - Method in interface nxopen.annotations.PmiPreferences
Returns the flag indicating whether PMI support for lightweight section view crosshatch adjacency tolerance is available
License requirements: None.
crosshatchAngle() - Method in interface nxopen.annotations.RegionBuilder
crosshatchAreaFillsCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
Returns the crosshatch area fills compare
License requirements: None.
crosshatchColor() - Method in interface nxopen.annotations.RegionBuilder
Returns the crosshatch color
License requirements: None.
crosshatchDistance() - Method in interface nxopen.annotations.RegionBuilder
crosshatchFile() - Method in interface nxopen.annotations.HatchBuilder
crosshatchFile() - Method in interface nxopen.annotations.HatchFillSettingsBuilder
Returns the crosshatch file
License requirements: None.
crosshatching() - Method in interface nxopen.CGMImporter
Returns the crosshatching flag, true if crosshatching should be done
License requirements: None.
crosshatchInheritedSectionViews() - Method in interface nxopen.drawings.ViewCreationWizardBuilder
Returns the crosshatch inherited section views
License requirements: None.
crossHatchMappingFile() - Method in interface nxopen.DxfdwgCreator
Returns the CrossHatchMappingFile command - definition file for cross hatch mapping
License requirements: None.
crossHatchMappingFile() - Method in interface nxopen.DxfdwgImporter
Returns the CrossHatchMappingFile command - definition file for cross hatch mapping
License requirements: None.
crosshatchPattern() - Method in interface nxopen.annotations.RegionBuilder
crosshatchPmiLightweightSectionView() - Method in interface nxopen.preferences.InheritPmiPreferences
Returns the cross-hatch setting for the current inherited PMI Lightweight Section View
License requirements: None.
crosshatchPmiLwsv() - Method in interface nxopen.drawings.InheritPmiViewStyle
Returns the cross-hatch setting for the current inherited PMI Lightweight Section View
License requirements: None.
crosshatchPmiLwsv() - Method in interface nxopen.drawings.ViewStyleInheritPmiBuilder
Returns the cross-hatch setting for the current inherited PMI Lightweight Section View
License requirements: None.
crosshatchSettings() - Method in interface nxopen.annotations.LightweightSectionBuilder
Returns the crosshatch settings
License requirements: None.
crosshatchSettings() - Method in interface nxopen.annotations.RegionBuilder
Returns the crosshatch settings block
License requirements: None.
crossHoleAngle() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
Returns the cross hole angle
License requirements: None.
crossHoleCircle() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
Returns the cross hole circle
License requirements: None.
crossHoleDiameter() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
Returns the cross hole diameter
License requirements: None.
crossHoleDistance() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
Returns the cross hole distance
License requirements: None.
CROSSING - Static variable in class nxopen.display.SelPref.SelectionRule
multi-select rule crossing
crossingLevel() - Method in interface nxopen.cae.responsesimulation.LcrResultsEvaluationSettingBuilder
crossingLevelExpression() - Method in interface nxopen.cae.responsesimulation.LcrResultsEvaluationSettingBuilder
Returns the crossing level expression
License requirements: nx_response_anlys ("NX Response Analysis")
.
crossLinesRatio() - Method in interface nxopen.tooling.ElectrodeBlankBuilder
Returns the ratio of cross center lines.
crossMaxDegree() - Method in interface nxopen.SurfaceRebuildData
Returns
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
crossMaxSegments() - Method in interface nxopen.SurfaceRebuildData
Returns
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
crossRebuildType() - Method in interface nxopen.SurfaceRebuildData
Returns
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
CrossSection - Interface in nxopen.routing
CrossSectionCollection - Interface in nxopen.routing
crossSectionCurveOption() - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder
Returns the cross section curve option
License requirements: solid_modeling ("SOLIDS MODELING")
.
crossSectionCurves() - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder
Returns the Cross Section Curves
License requirements: solid_modeling ("SOLIDS MODELING")
.
CrossSectionParameters - Interface in nxopen.cae
This class is worked as a packet of information that can be used to change cross-section state.
crossSections() - Method in interface nxopen.routing.RouteManager
CrossSection collection .
crossSections - Variable in class nxopen.uf.UFRoute.AskStockDataCrossData
crossSectionType() - Method in interface nxopen.features.FaceBlendBuilder
Returns the cross section for face blend
License requirements: None.
crossSectionType() - Method in interface nxopen.features.sheetmetal.BeadBuilder
Returns the bead profile type .
crossSectionType() - Method in interface nxopen.routing.electrical.ElectricalStockDefinition
Returns the cross section type of stock
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
crossSectionViewSetLockRotation(int, boolean) - Method in interface nxopen.cae.Post
Orients and disables all rotations in the input
postview id.
crossSectionViewSetResult(int, CrossSectionParameters) - Method in interface nxopen.cae.Post
Set the result for color display in the input cross-section view id.
crossSectionWidth() - Method in interface nxopen.features.sheetmetal.FlexibleCableBuilder
Returns the cross section width.
crossSurfaceRebuildData() - Method in interface nxopen.features.ThroughCurveMeshBuilder
Returns the cross surface rebuild data,
Rebuild .
Returns the cross template curve.
crType - Variable in class nxopen.uf.UFNxsm.FlangeData
CRV_PLANE_NORMAL - Static variable in class nxopen.geometricutilities.ProjectionOptions.DirectionType
Curve plane Normal
crvatr - Variable in class nxopen.uf.UFCurve.PtSlopeCrvatr
crvatrType - Variable in class nxopen.uf.UFCurve.PtSlopeCrvatr
crvOpt - Variable in class nxopen.uf.UFModl.StycornerData
CS - Static variable in class nxopen.preferences.SessionUserInterface.JournalLanguageType
CsdEvaluationSetting - Interface in nxopen.cae.responsesimulation
Represents the class of evaluation setting for CSD
To create or edit an instance of this class, use
CsdEvaluationSettingBuilder
Created in NX6.0.0
Represents an CSD excitation.
CSDExcitation.CorrelationType - Class in nxopen.cae.responsesimulation
Represents the correlation type.
CSDExcitationBuilder - Interface in nxopen.cae.responsesimulation
CSDExcitationBuilder.CSDFunction - Class in nxopen.cae.responsesimulation
CSDFunction() - Constructor for class nxopen.cae.responsesimulation.CSDExcitationBuilder.CSDFunction
CSE - Static variable in class nxopen.sim.SimDebugBuilder.DriverType
CSE driver
csetTag - Variable in class nxopen.uf.UFAssem.AskLastFilterData
CSHEET - Static variable in class nxopen.PrintBuilder.PaperSize
C Sheet, 17- by 22-inches
csinkAngle - Variable in class nxopen.features.Hole.CountersinkHoleData
Expression for countersink angle
csinkAngle - Variable in class nxopen.uf.UFModlFeatures.AskCSunkHoleParmsData
csinkDiameter() - Method in interface nxopen.cam.Cycle
Returns the csink diameter
License requirements: None.
csinkDiameter - Variable in class nxopen.features.Hole.CountersinkHoleData
Expression for countersink diameter
csMode() - Method in interface nxopen.cam.TurnAvoidancePathPointsBuilder
Returns the cs mode
License requirements: None.
csOption() - Method in interface nxopen.cae.AssignNodalCSBuilder
Returns the cs option
License requirements: None.
CSV - Static variable in class nxopen.cae.LaminateViewDrapingResultsBuilder.OuputChoice
CSV - Static variable in class nxopen.cam.InspectionMeasDataBuilder.InputFormatType
Comma separated
csvFileName() - Method in interface nxopen.weld.ExportWeldBuilder
Returns the CSV file name
License requirements: ugweld ("UG WELD")
.
csys() - Method in interface nxopen.cae.ElementTranslateBuilder
Returns the coordinate system to be used for translating the selected elements
License requirements: None.
CSYS - Static variable in class nxopen.cae.LaminateDrapingDataBuilder.DrapingDirectionType
Define draping direction using a coordinate system
csys() - Method in interface nxopen.cae.NodeCreateBuilder
Returns the csys
License requirements: None.
csys() - Method in interface nxopen.cae.NodeElementInfoBuilder
Returns the displacement/reference csys
License requirements: None.
csys() - Method in interface nxopen.cae.NodeTranslateBuilder
Returns the csys
License requirements: None.
csys() - Method in interface nxopen.cae.responsesimulation.StrainGageBuilder
Returns the orientation direction, Only available when the strain gage's orientation plane type is
CAE.ResponseSimulation.StrainGageOrientationPlane#CSYS
License requirements: nx_response_anlys ("NX Response Analysis")
Created in NX6.0.0
CSYS - Static variable in class nxopen.cae.responsesimulation.StrainGageOrientationPlane
csys() - Method in interface nxopen.cae.ResultVariable
Returns the Co-ordinate System
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
csys() - Method in interface nxopen.cam.LaserControlPoint
Returns the Local Head Orientation
License requirements: None.
csys() - Method in interface nxopen.cam.LaserHeadOrientation
Returns the Head Orientation
License requirements: None.
csys() - Method in interface nxopen.die.PressureSystemChildBuilder
Returns the csys of the pressure system.
CSYS - Static variable in class nxopen.DisplayManager.ShowHideType
Show or hide coordinate systems
csys() - Method in interface nxopen.features.DatumCsysBuilder
Returns the CSYS that defines a Datum CSYS
License requirements: None.
CSYS - Static variable in class nxopen.features.FitSurfaceBuilder.DirectionType
CSYS will specify same as orientation but with the need to make it associative with existing geometry.
CSYS - Static variable in class nxopen.features.MatchedReferenceBuilder.Types
csys
csys() - Method in interface nxopen.features.ScaleBuilder
csys() - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
Returns the c sys
License requirements: None.
CSYS - Static variable in class nxopen.features.sheetmetal.FlatSolidBuilder.TransformComponentsOption
transform components as CSYS
CSYS - Static variable in class nxopen.geometricutilities.GeneralPattern.FromLocationOptions
csys
csys() - Method in interface nxopen.geometricutilities.GeometryLocationData
Returns the csys
License requirements: None.
CSYS - Static variable in class nxopen.geometricutilities.GeometryLocationData.EntityTypes
csys() - Method in interface nxopen.geometricutilities.OrientXpressBuilder
Returns the orientXpress reference csys when reference option is set to csys
License requirements: None.
CSYS - Static variable in class nxopen.geometricutilities.OrientXpressBuilder.Reference
Reference CSYS is user specified coordinate system
CSYS - Static variable in class nxopen.HumanPosturePredictionBuilder.SteeringWheelPedalType
No steering wheel or pedal, use csys to define
the position and orientation of hand or foot
csys() - Method in interface nxopen.IgesCreator
Returns the csys - reference coordinate system for exported data
License requirements: None.
csys() - Method in interface nxopen.motion.BushingDefine
Returns the csys of bushing, the coordinate system of action and reaction are same each other
License requirements: mechanisms ("MECHANISMS")
.
CSYS - Static variable in class nxopen.motion.BushingDefine.OrientationTypes
CSYS orientation type
CSYS - Static variable in class nxopen.motion.JointDefine.OrientationType
CSYS orientation type
csys() - Method in interface nxopen.motion.MarkerBuilder
Returns the csys
License requirements: None.
csys() - Method in interface nxopen.motion.VObject
Returns the force csys
License requirements: None.
csys() - Method in interface nxopen.ObjectTypeSelector
Returns the csys - This should be set to true if coordinate systems are desired in the output file
License requirements: None.
csys() - Method in interface nxopen.PasteSpecialBuilder
Returns the destination coordinate system
License requirements: None.
CSYS - Static variable in class nxopen.PasteSpecialBuilder.DestinationOption
csys() - Method in interface nxopen.sim.KinematicJunctionBuilder
Returns the CSYS associated with the junction
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder") OR resource_manager_nx ("Teamcenter Resource Manager")
.
csys - Variable in class nxopen.uf.UFSket.Info
csys() - Method in interface nxopen.UFSession
CSYS_FACE_NORMAL_ANGLE - Static variable in class nxopen.weld.WeldAdvisorCheckerType
csys face normal angle
CSYS_NOT_PARALLEL - Static variable in class nxopen.uf.UFConstants
CSYS_ROTATION - Static variable in class nxopen.cam.OrientGeomBuilder.SpecialOutputModes
Special output mode: CSYS rotation
CSYS_TO_CSYS - Static variable in class nxopen.geometricutilities.ModlMotion.Options
Move by CSYS to CSYS
CSYS_TO_CSYS - Static variable in class nxopen.uf.UFConstants
csysAssemblyState() - Method in interface nxopen.weld.WeldPointBuilder
Returns the assy coordinate system state
License requirements: ugweld ("UG WELD")
.
csysAssociative() - Method in interface nxopen.features.ToolingBoxBuilder
Returns the csys associative
License requirements: None.
csysAxis() - Method in interface nxopen.cae.PostGraphAlongPathBuilder
CsysData() - Constructor for class nxopen.weld.WeldPointBuilder.CsysData
csysFixedSizeOnScreen() - Method in interface nxopen.preferences.SessionVisualizationScreen
Returns whether the CSYS display in fixed size on screen.
csysInformationListing() - Method in interface nxopen.cam.Preferences
Returns the base info
License requirements: None.
csysMatrix - Variable in class nxopen.uf.UFAssem.AskComponentData
csysMatrix - Variable in class nxopen.uf.UFRoute.AskPlacesTransformData
csysMatrix - Variable in class nxopen.uf.UFUi.PickCsysData
csysMatrix - Variable in class nxopen.uf.UFUi.SpecifyCsysData
csysMirrorOption() - Method in interface nxopen.features.GeomcopyBuilder
Returns the Alternate Datum CSYS mirror method option
License requirements: None.
csysMirrorOption() - Method in interface nxopen.features.MirrorBuilder
Returns the Coordinate System mirroring option
License requirements: None.
csysMode - Variable in class nxopen.uf.UFPart.ImportPartModes
csysOffset - Variable in class nxopen.cae.FEModelOccurrence.LabelOffsetsData
csys offset
csysOrientWcsToMcs() - Method in interface nxopen.cam.Preferences
Returns the orient wcs to mcs
License requirements: None.
CSYSORIGIN - Static variable in class nxopen.cae.FreeBodyResultsBuilder.LocationMethod
location is defined by coordinate system origin
csysOrigin - Variable in class nxopen.uf.UFCsys.AskCsysInfoData
csysPick() - Method in interface nxopen.cam.InspectionAlignmentBuilder
Returns the csys pick
License requirements: None.
csysSelection() - Method in interface nxopen.features.ToolingBoxBuilder
Returns the selected reference csys
License requirements: None.
csysShowThrough() - Method in interface nxopen.preferences.SessionVisualizationScreen
Returns whether the CSYS display in show through mode
License requirements: None.
csysTag - Variable in class nxopen.uf.UFModl.DimensionData
csysTag - Variable in class nxopen.uf.UFModlFeatures.AskDatumCsysComponentsData
csysTag - Variable in class nxopen.uf.UFSket.Info
csysTag - Variable in class nxopen.uf.UFUi.SpecifyCsysData
csystargetFace() - Method in interface nxopen.features.shipdesign.WeldCut2Builder
Returns the csys target face.
CSYSTEM - Static variable in class nxopen.cae.BushingEADBuilder.OrientationMethod
use a csystem to orient the element
CSYSTEM - Static variable in class nxopen.cae.GapEADBuilder.OrientationMethod
use a csystem to orient the element
CSYSTO_CSYS - Static variable in class nxopen.geometricutilities.PatternOrientation.Enum
a relative orientation defined by two CSYSs to transform the seed to an instance location.
csysToCsys(double[], double[], double[], double[], double[], double[]) - Method in interface nxopen.uf.UFMtx4
csysType() - Method in interface nxopen.display.DynamicSectionBuilder
Returns the coordinate system used for creating section plane along
X, Y or Z principal planes.
csysVisibility() - Method in interface nxopen.tooling.MotionSimulationBuilder
Returns the csys visibility to specify if hide csys in kinematic model
License requirements: None.
csysWorkPartState() - Method in interface nxopen.weld.WeldPointBuilder
Returns the work coordinate systemstate
License requirements: ugweld ("UG WELD")
.
CTR - Static variable in class nxopen.features.shipdesign.ThicknessDirectionBuilder.ThicknessDirectionType
Thickness is centered about the mold face.
CUBES - Static variable in class nxopen.cae.Post.Style
CUBIC - Static variable in class nxopen.cae.Function.InterpolationMethod
Indicates data calculated by cubic interpolation
CUBIC - Static variable in class nxopen.die.OutputCurvesBuilder.SmoothTypes
Cubic
CUBIC - Static variable in class nxopen.die.TrimLineDevelopmentBuilder.SmoothingName
Cubic approximation
CUBIC - Static variable in class nxopen.facet.SubdivideFacetBodyBuilder.InterpolationMethodType
In the cubic option the sub-triangles are fitted cubic to the surrounding triangles.
CUBIC - Static variable in class nxopen.features.BridgeCurveBuilder.CurveFitTypes
Deprecated.
fit curve with 3 degrees
CUBIC - Static variable in class nxopen.features.CompositeCurveBuilder.JoinMethod
Cubic
CUBIC - Static variable in class nxopen.features.JoinCurvesBuilder.OutputCurve
Cubic output curve
CUBIC - Static variable in class nxopen.features.SectionSurfaceBuilder.UDegreeEnum
Deprecated.
cubic in u
CUBIC - Static variable in class nxopen.features.SectionSurfaceBuilderEx.Types
Cubic type
CUBIC - Static variable in class nxopen.features.SectionSurfaceBuilderEx.UDegreeType
cubic in u
CUBIC - Static variable in class nxopen.features.StudioSplineBuilder.MatchKnotsType
Deprecated.
Match knots for cubic non-periodic spline
CUBIC - Static variable in class nxopen.features.StudioSplineBuilderEx.MatchKnotsTypes
Match knots for cubic non-periodic spline
CUBIC - Static variable in class nxopen.features.StudioSurfaceBuilder.TransitionOptions
Cubic
CUBIC - Static variable in class nxopen.features.StyledSweepBuilder.TransitionOptions
Cubic
CUBIC - Static variable in class nxopen.features.SweptBuilder.InterpolationOptions
Cubic
CUBIC - Static variable in class nxopen.features.VariableOffsetBuilder.MethodOptions
cublic offset applied along both of U and V directions
CUBIC - Static variable in class nxopen.geometricutilities.CurveFitData.Join
Cubic
CUBIC - Static variable in class nxopen.geometricutilities.CurveFitJoin.JoinMethod
Cubic
CUBIC - Static variable in class nxopen.geometricutilities.CurveFitOptions.FitMethod
Cubic
CUBIC - Static variable in class nxopen.geometricutilities.LawBuilder.Type
cubic law type
CUBIC - Static variable in class nxopen.geometricutilities.Rebuild.DegreeTypes
The rebuild degree is cubic.
CUBIC - Static variable in class nxopen.geometricutilities.ScalingMethodBuilder.BlendingFunctionTypes
Cubic
CUBIC - Static variable in class nxopen.preferences.SessionModeling.CurveFitMethodType
Indicates the Curve Fit Method type is cubic
CUBIC_ALONG_SPINE - Static variable in class nxopen.geometricutilities.LawBuilder.Type
cubic along spine law type
CUBIC_JOIN - Static variable in class nxopen.uf.UFCurve.JoinTypes
CUBIC_NURBBESTFIT_SPLINE - Static variable in class nxopen.IgesImporter.CopiousDataEnum
map copious data to Cubic Nurb best fit spline
CUBIC_SPLINE - Static variable in class nxopen.cam.LaserProfileMove.InterpMethods
Cubic Spline
CUBIC_SPLINE - Static variable in class nxopen.cam.ToolAxisInterpolate.InterpolationMethodTypes
Cubic Spline
CUBIC_TWIST - Static variable in class nxopen.features.shipdesign.OrientationRegionItemBuilder.OrientationMethodTypes
The web of the profile moves from a starting orientation to an ending orientation in a cubic fashion.
cubicTypeMode() - Method in interface nxopen.features.SectionSurfaceBuilderEx
Returns the cubic type mode.
cue() - Method in interface nxopen.blockstyler.BodyCollector
Returns the Cue
License requirements: None.
cue() - Method in interface nxopen.blockstyler.CompositeBlock
Returns the Cue
License requirements: None.
cue() - Method in interface nxopen.blockstyler.CurveCollector
Returns the Cue
License requirements: None.
cue() - Method in interface nxopen.blockstyler.FaceCollector
Returns the Cue
License requirements: None.
cue() - Method in interface nxopen.blockstyler.SectionBuilder
Returns the Cue
License requirements: None.
cue() - Method in interface nxopen.blockstyler.SelectElement
Returns the Cue
License requirements: None.
cue() - Method in interface nxopen.blockstyler.SelectObject
Returns the Cue
License requirements: None.
cue() - Method in interface nxopen.blockstyler.SuperPoint
Returns the Cue
License requirements: None.
cue() - Method in interface nxopen.blockstyler.SuperSection
Returns the Cue
License requirements: None.
curBodies() - Method in interface nxopen.tooling.DirectUnfoldBuilder
Returns the current body list.
CURL_HEM_TYPE - Static variable in class nxopen.features.sheetmetal.HemFlangeBuilder.TypeOptions
CURRENT - Static variable in class nxopen.cae.CreateJtBuilder.Component
Value represents component used to create result parameter
CURRENT - Static variable in class nxopen.cae.Result.Quantity
current() - Method in interface nxopen.LayoutCollection
Returns the current the layout.
CURRENT - Static variable in class nxopen.PartCollection.RefsetOption
Use the component's current reference set
CURRENT - Static variable in class nxopen.tooling.MWPartingManagerBuilder.RegisterType
Register current UNDO mark.
CURRENT - Static variable in class nxopen.View.ScaleAdjustment
current() - Method in interface nxopen.visualreporting.VisualReportManager
Returns
the current nxopen.visualreporting.VisualReport .
CURRENT_LEVEL - Static variable in class nxopen.cam.NcmPlanarEngRetBuilder.MeasureHeightFrom
Measure from current level
CURRENT_PART_NAME - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.IdnameMethods
Use current part name for ID
CURRENT_PART_NAME - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.ProgramNameMethods
Use current part name for program name
CURRENT_PART_REVISION - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.RevMethods
Use current part revision
CURRENT_SEGMENT - Static variable in class nxopen.cam.BoundaryTurnMemberFineFinishCorner.AppliedTo
CURRENT_TOOL - Static variable in class nxopen.cam.CornerControlBuilder.SlowdownDistanceOptions
current tool
CURRENT_VIEW - Static variable in class nxopen.features.CircularBlendCurveBuilder.CylinderDirectionOption
Current view method
CURRENT_VIEW - Static variable in class nxopen.tooling.BlendCurve3DBuilder.BlendCurveOptions
Create blend curve by current view method
CURRENT_WCS - Static variable in class nxopen.features.SectionInertiaAnalysisBuilder.CoordSys
World Coordinate System
CURRENT_WCS - Static variable in class nxopen.tooling.MoldCsysBuilder.Wcsposition
current wcs position
CURRENT_WORK_PART - Static variable in class nxopen.tooling.SubInsertBuilder.Types
The parent part is current work part
currentChild - Variable in class nxopen.uf.UFAssem.InstanceStatus
currentComfortStudyName() - Method in interface nxopen.features.HumanBuilder
Returns the current study name of comfort analysis
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
currentDiscipline() - Method in interface nxopen.preferences.RoutingApplicationView
Returns the current discipline.
currentFeature() - Method in interface nxopen.Part
Returns the current feature.
currentGroupIDColorIndex() - Method in interface nxopen.weld.WeldPreferenceBuilder
Returns the group idcolor assigned
License requirements: None.
currentholeshapepatternname - Variable in class nxopen.uf.UFModl.ShapePatternClientDialogData
currentItemIndex() - Method in interface nxopen.annotations.ListBusinessModifier
Returns the current item index
License requirements: None.
currentlargeimagename - Variable in class nxopen.uf.UFModl.ShapePatternClientDialogData
currentLevel() - Method in interface nxopen.options.ChangeList
Returns the current level of options
License requirements: None.
currentLevel() - Method in interface nxopen.options.DraftingStandardChangeList
Returns the current level of options
License requirements: None.
currentManikinSize() - Method in interface nxopen.features.vehicledesign.ManikinBuilder
Returns the current manikin size string.
currentMode() - Method in interface nxopen.issue.IssueManager
Returns the current mode
License requirements: None.
currentMset() - Method in interface nxopen.tooling.ElectrodeInitializationBuilder
Returns the machine set part which is the working part.
currentNode() - Method in interface nxopen.blockstyler.Explorer
Returns the CurrentNode selected in the Navigation Tree.
currentObjectType() - Method in interface nxopen.features.PartGeometryCopySelectBuilder
Returns the type of current object to be copied
License requirements: None.
currentOption - Variable in class nxopen.uf.UFDrf.CustomSymbolText
currentSbfFile() - Method in interface nxopen.annotations.AnnotationManager
Returns the symbol font definition file.
CURRENTSEGMENT - Static variable in class nxopen.cam.BoundaryTurnMemberCorner.AngleValueType
currentSelectedPort() - Method in interface nxopen.routing.RunItemsBuilder
Returns the ports of FROM/TO item of the run.
currentSite() - Method in interface nxopen.issue.IssueManager
Returns the current
IssueSite
License requirements: nx_issue_mgmt ("NX Issue Tracking")
Created in NX8.5.0
Returns the current specification for the current discipline.
currentStep() - Method in interface nxopen.blockstyler.Wizard
Returns the CurrentStep.
currentStep() - Method in interface nxopen.motion.AnimationControl
Returns the current animation step
License requirements: mechanisms ("MECHANISMS")
.
currentstep - Variable in class nxopen.motion.ArticulationControl.ArticulationJointsDisplacementData
The current step index
currentStepStatusAsString() - Method in interface nxopen.blockstyler.SpecifyPlane
Returns the string specifying current StepStatus
License requirements: None.
currentString() - Method in interface nxopen.ReplaceExpressionsBuilder
Returns the current string.
currentSubsetBuilder() - Method in interface nxopen.CollaborativeDesignCollection
Returns the Assemblies.SubsetBuilder used to edit the current subset in the
subset task environment
License requirements: assemblies ("ASSEMBLIES MODULE")
Created in NX8.5.0
currentTile() - Method in interface nxopen.preferences.RoutingStock
Returns the current routing level/tile
License requirements: routing_base ("Routing Basic")
.
currentValue - Variable in class nxopen.uf.UFDrf.CustomSymbolText
cursor - Variable in class nxopen.Selection.SelectObjectData
Absolute coordinates of cursor position.
cursor - Variable in class nxopen.Selection.SelectTaggedObjectData
Absolute coordinates of cursor position.
CURSOR_LOCATION - Static variable in class nxopen.cam.InspectionMeasurePointBuilder.PointTypes
Cursor Location
cursorLocation() - Method in interface nxopen.blockstyler.SpecifyLocation
Returns the CursorLocation
License requirements: None.
cursorTracking() - Method in interface nxopen.drawings.ViewWorkflowBuilder
Returns the cursor tracking enable XC/YC coordinates in dynamic input boxes when placing a view on a drawing
License requirements: None.
CURV1FT - Static variable in class nxopen.cae.XyFunctionUnit
Curvature unit: 1/ft
CURV1IN - Static variable in class nxopen.cae.XyFunctionUnit
Curvature unit: 1/in
CURV1M - Static variable in class nxopen.cae.XyFunctionUnit
Curvature unit: 1/m
CURV1MM - Static variable in class nxopen.cae.XyFunctionUnit
Curvature unit: 1/mm
CURVATURE - Static variable in class nxopen.cae.XyFunctionMeasure
Curvature unit
CURVATURE - Static variable in class nxopen.features.EdgeBlendBuilder.FaceContinuity
CURVATURE - Static variable in class nxopen.features.GeometricConstraintData.AutoConstraintType
Curvature(G2)
curvature() - Method in interface nxopen.features.GeometricConstraintData
Returns the curvature.
CURVATURE - Static variable in class nxopen.features.MeshSurfaceBuilder.ConstraintType
Curvature
CURVATURE - Static variable in class nxopen.features.SmoothSplineBuilder.Types
Curvature
CURVATURE - Static variable in class nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder.CalculationMethod
needle of curvature value
CURVATURE - Static variable in class nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder.LabelValues
label showing curvature value
curvature - Variable in class nxopen.geometricanalysis.GeometricProperties.Edge
Curvature of the Curve
CURVATURE - Static variable in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder.CalculationMethodType
Curvature
CURVATURE - Static variable in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder.CalculationMethodType
Curvature
CURVATURE - Static variable in class nxopen.geometricanalysis.SurfaceIntersectionBuilder.CalculationTypes
needle of curvature value
CURVATURE - Static variable in class nxopen.geometricanalysis.SurfaceIntersectionBuilder.LabelValues
label showing curvature value
CURVATURE - Static variable in class nxopen.geometricutilities.CombOptionsBuilder.AnalysisTypes
Curvature
curvature - Variable in class nxopen.mechatronics.CamProfileBuilder.Element
point curvature
CURVATURE - Static variable in class nxopen.motion.CurveParameterizedTypes
Curvature based type
curvature - Variable in class nxopen.uf.UFSo.SplineData
CURVATURE_ASYMMETRIC - Static variable in class nxopen.features.FaceBlendBuilder.CrossSectionOption
this means curvature continuous asymmetric conic type
CURVATURE_BASED - Static variable in class nxopen.facet.FillHoleBuilder.SmoothTypes
Smooth fill, boundary is based on facet body curvature.
CURVATURE_DERIVATIVE - Static variable in class nxopen.features.GeometricConstraintData.AutoConstraintType
Curvature derivative(G3)
CURVATURE_SYMMETRIC - Static variable in class nxopen.features.FaceBlendBuilder.CrossSectionOption
this means curvature continuous symmetric conic type
CURVATURE_VARIATION - Static variable in class nxopen.features.SmoothSplineBuilder.Types
Curvature Variation
CurvatureBuilder - Interface in nxopen.facet
curvatureCheck() - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder
Returns the curvature check
License requirements: None.
curvatureColor() - Method in interface nxopen.preferences.SessionModeling
Returns the curvature color
License requirements: None.
curvatureCombScaleFactor - Variable in class nxopen.uf.UFCurve.AnalysisDisplay
curvatureDerivative() - Method in interface nxopen.features.GeometricConstraintData
Returns the curvature derivative.
curvatureFactor() - Method in interface nxopen.cam.InspectionMethodBuilder
Returns the curvature increase factor
License requirements: None.
curvatureFactor() - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder
Returns the Curvature Increase Factor for points along the Scan Curve
License requirements: None.
curvatureFactor() - Method in interface nxopen.cam.InspectionScanCurveBuilder
Returns the Curvature Increase Factor for points along the Scan Curve
License requirements: None.
curvatureGeometry() - Method in interface nxopen.SketchG2Constraint
Returns the geometry supplying curvature for G2 constraint.
curvatureSectionPlane() - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder
Returns the section curvature plane when sectional curvature values are to be computed and displayed.
curvatureSensitivity() - Method in interface nxopen.facet.DetectPrimitivesBuilder
Returns the curvature sensitivity
License requirements: None.
curvatureTolerance() - Method in interface nxopen.features.AestheticFaceBlendBuilder
Returns the curvature tolerance
License requirements: None.
curvatureTolerance() - Method in interface nxopen.features.NSidedSurfaceBuilder
Returns the curvature tolerance
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
curvatureTolerance() - Method in interface nxopen.features.SectionSurfaceBuilder
curvatureTolerance() - Method in interface nxopen.features.StudioSurfaceBuilder
Returns the curvature tolerance
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
curvatureTolerance() - Method in interface nxopen.features.ThroughCurveMeshBuilder
Returns the curvature tolerance.
curvatureTolerance() - Method in interface nxopen.features.ThroughCurvesBuilder
Returns the curvature tolerance.
curvatureType() - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder
Returns the curvature type to compute and display.
CURVE - Static variable in class nxopen.cae.AfuMathOperation.OuterInterpolation
Interpolates values with curve points
curve() - Method in interface nxopen.cae.MeshPointOnCurveBuilder
Returns the node
License requirements: None.
CURVE - Static variable in class nxopen.cae.optimization.Geometry
Curve
CURVE - Static variable in class nxopen.cam.BoundaryTurnBlank.Type
CURVE - Static variable in class nxopen.cam.CamInspectionOperationFeaturetypes
Curve
CURVE - Static variable in class nxopen.cam.InspectionMethodBuilder.MethodTypes
Curve
curve() - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder
Returns the curve
License requirements: None.
curve() - Method in interface nxopen.cam.InspectionScanCurveBuilder
Returns the curve
License requirements: None.
CURVE - Static variable in class nxopen.cam.SurfaceContourBuilder.DriveMethodTypes
Curve/Point
Curve - Interface in nxopen
Represents a curve.
CURVE - Static variable in class nxopen.die.CompensateRoughDataBuilder.Types
Curves being compensated.
curve() - Method in interface nxopen.die.DieLimitsBuilder
Returns the curve used to set the limits.
CURVE - Static variable in class nxopen.die.PadChildBuilder.ShapeTypeOption
Curve defined pad.
CURVE - Static variable in class nxopen.die.PadParentBuilder.ShapeTypeOption
Curve defined pad.
CURVE - Static variable in class nxopen.die.PierceHoleChildBuilder.ShapeTypeOption
curve defined hole
CURVE - Static variable in class nxopen.features.AeroFlangeBuilder.GuideObjectTypes
Guide object is curve
CURVE - Static variable in class nxopen.features.AeroRibBuilder.GuideObjectTypes
Guide object is curve
curve() - Method in interface nxopen.features.DatumAxisBuilder
Returns the curve or edge.
CURVE - Static variable in class nxopen.features.FitCurveBuilder.TargetSourceTypes
Curve
CURVE - Static variable in class nxopen.features.GeodesicIntersectBuilder.Type
Curve.
CURVE - Static variable in class nxopen.features.GeodesicProjectBuilder.Type
Curves.
curve() - Method in interface nxopen.features.GeodesicTrimBuilder
Returns the curve to trim
License requirements: None.
curve() - Method in interface nxopen.features.GlobalShapingCurveOffsetBuilder
Returns the target curve
License requirements: None.
CURVE - Static variable in class nxopen.features.MatchedReferenceBuilder.Types
single curve or edge
curve() - Method in interface nxopen.features.MirrorCurveBuilder
Returns the curves to mirror
License requirements: None.
CURVE - Static variable in class nxopen.features.OffsetEmbossBuilder.Types
This stands for curve case.
CURVE - Static variable in class nxopen.features.PartGeometryCopyBuilder.Type
Curve or edge
curve() - Method in interface nxopen.features.PartGeometryCopySelectBuilder
Returns the curve
License requirements: None.
CURVE - Static variable in class nxopen.features.ShelfBuilder.ReferenceType
CURVE - Static variable in class nxopen.features.shipdesign.DisplaySolidBuilder.DisplayOptionTypes
CURVE - Static variable in class nxopen.features.shipdesign.OrientationPointMethodsBuilder.MeasureAlongTypes
The distance is measured along the landing curve.
CURVE - Static variable in class nxopen.features.shipdesign.SplitStandardPartBuilder.ToolTypes
Curve
curve() - Method in interface nxopen.features.SmoothSplineBuilder
Returns the curve
License requirements: None.
CURVE - Static variable in class nxopen.features.StepBuilder.ReferenceBoundaryTypes
Select section curves as reference boundary object
curve() - Method in interface nxopen.features.StudioSplineBuilder
curve() - Method in interface nxopen.features.StudioSplineBuilderEx
Returns the spline curve
License requirements: None.
CURVE - Static variable in class nxopen.features.StyledBlendBuilder.Types
Curve type
CURVE - Static variable in class nxopen.features.vehicledesign.AllAroundVisionBuilder.WindowTypes
Curve Object for Windows.
CURVE - Static variable in class nxopen.features.vehicledesign.BumperPendulumBuilder.VisualizationType
CURVE - Static variable in class nxopen.features.vehicledesign.DynamicCurbBuilder.VisualizationType
CURVE - Static variable in class nxopen.features.vehicledesign.GroundClearanceBuilder.VisualizationTypes
CURVE - Static variable in class nxopen.features.vehicledesign.InnerAngleBuilder.VisualizationType
CURVE - Static variable in class nxopen.features.vehicledesign.OilPanBuilder.VisualizationType
CURVE - Static variable in class nxopen.features.vehicledesign.SlopeBuilder.VisualizationType
CURVE - Static variable in class nxopen.features.vehicledesign.StaticCurbBuilder.VisualizationType
Curve
curve() - Method in interface nxopen.geometricanalysis.DeviationChecking
CURVE - Static variable in class nxopen.geometricanalysis.GapFlushnessBuilder.EvaluationModes
along curve and distance
CURVE - Static variable in class nxopen.geometricanalysis.GapFlushnessBuilder.SectionAlignments
curve
curve() - Method in interface nxopen.geometricutilities.ModlAlongCurveAngle
Returns the curve on which doing the transform.
CURVE - Static variable in class nxopen.geometricutilities.SpineDefinitionBuilder.MethodOptions
Spine by curve or a profile
CURVE - Static variable in class nxopen.HumanPosturePredictionBuilder.SteeringWheelPedalType
Use curve steering wheel or pedal
CURVE - Static variable in class nxopen.InferSnapType.SnapType
Snap point on curve
CURVE - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.BlankOption
Select several curves to create a blank.
curve - Variable in class nxopen.uf.UFMotion.PointCurveConstraint
curve - Variable in class nxopen.uf.UFSo.OffsetCurveCvtrData
curve() - Method in interface nxopen.UFSession
curve() - Method in interface nxopen.weld.JointItemBuilder
Returns the joint curve
License requirements: None.
CURVE - Static variable in class nxopen.weld.WeldFillBuilder.BoundaryMethodType
Boundary defined by a curve.
CURVE - Static variable in class nxopen.weld.WeldSelectionType
curve
curve1() - Method in interface nxopen.features.CombinedProjectionBuilder
Returns the combined projection curve1
License requirements: None.
CURVE1 - Static variable in class nxopen.features.OvercrownBuilder.TransitionType
curve1() - Method in interface nxopen.features.TrimCornerBuilder
Returns the curve1
License requirements: None.
curve1 - Variable in class nxopen.uf.UFMotion.CurveCurveConstraint
curve1 - Variable in class nxopen.uf.UFMotion.Motion2DContact
curve2() - Method in interface nxopen.features.CombinedProjectionBuilder
Returns the combined projection curve2
License requirements: None.
CURVE2 - Static variable in class nxopen.features.OvercrownBuilder.TransitionType
curve2() - Method in interface nxopen.features.TrimCornerBuilder
Returns the curve2
License requirements: None.
curve2 - Variable in class nxopen.uf.UFMotion.CurveCurveConstraint
curve2 - Variable in class nxopen.uf.UFMotion.Motion2DContact
CURVE_ALIGNED - Static variable in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder.AlignmentType
The cutting planes are perpendicular to specified curves
CURVE_ALL - Static variable in class nxopen.uf.UFBrep.GeomType
CURVE_ALONG_CURVE - Static variable in class nxopen.bodydes.OnestepUnformBuilder.Constraint
Curve along Curve Constraint, used for complete unform only
CURVE_ALONG_CURVE - Static variable in class nxopen.features.sheetmetal.SMBoundaryConditionBuilder.ConstraintTypes
CURVE_AND_SOLID - Static variable in class nxopen.features.shipdesign.DisplaySolidBuilder.DisplayOptionTypes
CURVE_BETWEEN_INTERSECTION - Static variable in class nxopen.Section.DeselectOption
Portion of curve between intersection
CURVE_COLLECTOR - Static variable in class nxopen.features.MatchedReferenceBuilder.Types
curve collector or edge collector
CURVE_CUT_RANGE - Static variable in class nxopen.cam.CAMObject.Attr
CURVE_DEFINED - Static variable in class nxopen.features.GlobalShapingBuilder.OffsetMethod
Curve interpolated
CURVE_DEFINED - Static variable in class nxopen.features.GlobalShapingBuilder.RotationMethod
Curve interpolated rotation
CURVE_DUMB - Static variable in class nxopen.SelectionIntentRule.RuleType
CURVE_FEATURE - Static variable in class nxopen.features.PartGeometryCopyBuilder.Type
Curve-based feature
CURVE_FEATURE - Static variable in class nxopen.SelectionIntentRule.RuleType
CURVE_FEATURE_CHAIN - Static variable in class nxopen.SelectionIntentRule.RuleType
CURVE_FEATURE_TANGENT - Static variable in class nxopen.SelectionIntentRule.RuleType
CURVE_GROUP - Static variable in class nxopen.SelectionIntentRule.RuleType
CURVE_LINK - Static variable in class nxopen.features.WaveLinkBuilder.Types
CURVE_MESH - Static variable in class nxopen.die.AddendumSectionBuilder.SurfaceBuildType
Create curve mesh surface.
CURVE_MESH - Static variable in class nxopen.die.AddSurfBuilder.Methods
Modeling curve mesh.
CURVE_MESH - Static variable in class nxopen.MeshParameterData.FeatureType
CURVE_MESH_ALONG_DRIVER_NORMALS - Static variable in class nxopen.uf.UFModl.QuiltType
CURVE_MESH_ALONG_FIXED_VECTOR - Static variable in class nxopen.uf.UFModl.QuiltType
CURVE_MESH_INQUIRE_ERROR - Static variable in class nxopen.uf.UFConstants
CURVE_NOT_THEO_TANG - Static variable in class nxopen.uf.UFConstants
CURVE_NUMBER - Static variable in class nxopen.geometricanalysis.GapFlushnessBuilder.EvaluationModes
along curve and number
CURVE_OR_FACE_AXIS - Static variable in class nxopen.features.DatumAxisBuilder.Types
Datum axis at the curve or face axis
CURVE_PERCENTAGE - Static variable in class nxopen.features.PointSetBuilder.CurvePointsType
A point will be created at given curve percentage.
CURVE_PLANE - Static variable in class nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder.ProjectionTypes
best fit plane
CURVE_POINT - Static variable in class nxopen.PlaneTypes.MethodType
On curve through point method
CURVE_POINT - Static variable in class nxopen.Sketch.AssocType
A point on a spline
CURVE_POINT - Static variable in class nxopen.uf.UFSket.AssocType
CURVE_POINTS - Static variable in class nxopen.features.PointSetBuilder.Types
Create points along curve.
CURVE_SCAN - Static variable in class nxopen.cam.InspectionMethodBuilder.OperationTypes
Scan Curve
CURVE_SCAN5AXIS - Static variable in class nxopen.cam.InspectionMethodBuilder.OperationTypes
5-axis Scan Curve
CURVE_SURFACE - Static variable in class nxopen.features.vehicledesign.DynamicCurbBuilder.VisualizationType
CURVE_TAPERED - Static variable in class nxopen.features.EmbossSidewall.SidewallMethod
Indicates method to calculate tapered sidewall faces with reference to the taper direction.
CURVE_TO_CURVE - Static variable in class nxopen.bodydes.OnestepUnformBuilder.Constraint
Curve to Curve Constraint, used for intermediate unform only
CURVE_TO_CURVE - Static variable in class nxopen.features.sheetmetal.SMBoundaryConditionBuilder.ConstraintTypes
CURVE_TO_CURVE - Static variable in class nxopen.geometricanalysis.DeviationChecking.Types
check
curve/edge to curve/edge deviation
CURVE_TO_FACE - Static variable in class nxopen.geometricanalysis.DeviationChecking.Types
check curve/edge
to face deviation
CURVE_VIEW - Static variable in class nxopen.geometricanalysis.GapFlushnessBuilder.SectionAlignments
curve in view
curveAligned() - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder
Returns the Curve Aligned section specification.
CurveAlignedBuilder - Interface in nxopen.geometricanalysis.sectionanalysis
CurveAnalysisCombsBuilder - Interface in nxopen.geometricanalysis
CurveAnalysisCombsBuilder.DirectionOptionType - Class in nxopen.geometricanalysis
Deprecated.
Direction option types
CurveAnalysisDisplay - Interface in nxopen.geometricanalysis
Represents a tool to control whether to show a curve's poles,knots,combs,peaks and inflections
To obtain an instance of this class, refer to
AnalysisObjectCollection
Created in NX6.0.0
Returns object for displaying curve analysis information .
CurveAnalysisInflectionsBuilder - Interface in nxopen.geometricanalysis
CurveAnalysisInflectionsBuilder.DirectionOptionType - Class in nxopen.geometricanalysis
Deprecated.
Direction option types
CurveAnalysisPeaksBuilder - Interface in nxopen.geometricanalysis
CurveAnalysisPeaksBuilder.DirectionOptionType - Class in nxopen.geometricanalysis
Deprecated.
Direction option types
CurveAnalysisRecord - Interface in nxopen.geometricanalysis
CurveAnalysisRecord.DirectionOptionType - Class in nxopen.geometricanalysis
Deprecated.
Direction option types
CURVEAND_SURFACE - Static variable in class nxopen.features.vehicledesign.BumperPendulumBuilder.VisualizationType
CURVEAND_SURFACE - Static variable in class nxopen.features.vehicledesign.GroundClearanceBuilder.VisualizationTypes
CURVEAND_SURFACE - Static variable in class nxopen.features.vehicledesign.InnerAngleBuilder.VisualizationType
CURVEAND_SURFACE - Static variable in class nxopen.features.vehicledesign.OilPanBuilder.VisualizationType
CURVEAND_SURFACE - Static variable in class nxopen.features.vehicledesign.SlopeBuilder.VisualizationType
CURVEAND_SURFACE - Static variable in class nxopen.features.vehicledesign.StaticCurbBuilder.VisualizationType
Curves and Surface
curveAngularTolerance - Variable in class nxopen.facet.FacetingParameters
This is the maximum angular variation
in radians of the curve tangent along
the curve segment represented by the
facet edge.
curveAngularTolerance - Variable in class nxopen.uf.UFFacet.Parameters
curveBlend() - Method in interface nxopen.tooling.BlendCurve3DBuilder
Returns the curves to blend.
curveBoundaries() - Method in interface nxopen.annotations.BoundaryBuilder
Returns the curve boundaries
License requirements: None.
curveBoundary() - Method in interface nxopen.features.shipdesign.PlateBuilder
Returns the curve boundary, which can be a single region or multiple regions.
curveChain() - Method in interface nxopen.features.FillHoleBuilder
Returns the curve chain
License requirements: None.
CurveChainRule - Interface in nxopen
Represents a
SelectionIntentRule that collects end-to-end connected curves from the seed curve.
Represents a collection of
Curve .
Represents a Curve Collector .
curveCollector() - Method in interface nxopen.die.CompensateRoughDataBuilder
Returns the curve collector containing the curves that will be approximated.
curveCollector() - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
Returns the curve collector
License requirements: None.
curveColor() - Method in interface nxopen.display.DynamicSectionBuilder
Returns the curve color.
curveColor() - Method in interface nxopen.preferences.PartSketch
Returns the sketch curve color
License requirements: None.
curveColorOption() - Method in interface nxopen.display.DynamicSectionBuilder
Returns the curve color option
License requirements: None.
CurveContact - Interface in nxopen.motion
CurveContactAdams - Interface in nxopen.motion
CurveContactBuilder - Interface in nxopen.motion
CurveContactBuilder.GeometryMaterialSide - Class in nxopen.motion
the enum for the materia side direction of the selected geometry
CurveContactCollection - Interface in nxopen.motion
Represents a collection of 2D contact objects.Any 2D contact object must
be created and found through this class
To obtain an instance of this class, refer to
MotionManager
Created in NX5.0.0
Returns the Motion.CurveContactCollection belonging to this part
Created in NX3.0.0
CurveContinuity - Interface in nxopen.geometricanalysis
Represents a Curve Continuity Analysis builder
To create or edit an instance of this class, use
CurveContinuityBuilder
Created in NX7.0.0
Returns the curve control
License requirements: None.
curveCount() - Method in interface nxopen.features.shipdesign.TraceLinesBuilder
Returns the curve count
License requirements: None.
curveCount - Variable in class nxopen.uf.UFDraw.AskCurveGroupMembersData
curveCount - Variable in class nxopen.uf.UFDraw.SetBoundaryAssocData
CurveCurvatureAnalysis - Interface in nxopen.geometricanalysis
CurveCurvatureAnalysisBuilder - Interface in nxopen.geometricanalysis
CurveCurvatureAnalysisBuilder.CalculationMethod - Class in nxopen.geometricanalysis
Enumeration for needle calculation method
CurveCurvatureAnalysisBuilder.DisplayStyle - Class in nxopen.geometricanalysis
Enumeration for needle display type
CurveCurvatureAnalysisBuilder.LabelValues - Class in nxopen.geometricanalysis
Enumeration for label computation method
CurveCurvatureAnalysisBuilder.NeedleDirection - Class in nxopen.geometricanalysis
Enumeration for needle direction type
CurveCurvatureAnalysisBuilder.ProjectionTypes - Class in nxopen.geometricanalysis
Projection plane types
CurveCurvatureAnalysisBuilder.XyzTypes - Class in nxopen.geometricanalysis
Enumeration for X, Y or Z projection plane
curveCurvatureDisplay() - Method in interface nxopen.preferences.PartModeling
Returns the curve curvature display.
curveCurvatureShowCap() - Method in interface nxopen.preferences.PartModeling
Returns the curve curvature display show cap line
License requirements: None.
curveCurvatureStyle() - Method in interface nxopen.preferences.PartModeling
Returns the curve curvature display style
License requirements: None.
CurveCurveConstraint() - Constructor for class nxopen.uf.UFMotion.CurveCurveConstraint
CurveCurveConstraint(String, int, Tag[], int, Tag[]) - Constructor for class nxopen.uf.UFMotion.CurveCurveConstraint
CURVED - Static variable in class nxopen.cae.ElementModifyOrderBuilder.Midnode
curved midnodes
CURVED - Static variable in class nxopen.cae.MappedMeshBuilder.MidNodeType
Curved Option
CurveData() - Constructor for class nxopen.facet.FacetedEdge.CurveData
CurveData() - Constructor for class nxopen.motion.GraphBuilder.CurveData
CurveData(NXObject, int, int, int) - Constructor for class nxopen.motion.GraphBuilder.CurveData
Constructor for the CurveData object.
curveDirectionOption() - Method in interface nxopen.geometricutilities.BridgeCurveConnectivity
Returns the curve direction option
License requirements: None.
curveDistanceTolerance - Variable in class nxopen.facet.FacetingParameters
This is the maximum distance between
the facet edge and the curve segment
represented by the facet edge.
curveDistTolerance - Variable in class nxopen.uf.UFFacet.Parameters
CurveDumbRule - Interface in nxopen
Represents a
SelectionIntentRule that collects curves without any intent i.e. as if collected with Single Curve rule.
Returns the end of the curve that would be trimmed
License requirements: None.
curveEqualNext - Variable in class nxopen.mechatronics.CamProfileBuilder.Element
if the segment curvature equal with the next segment
curveEqualPrev - Variable in class nxopen.mechatronics.CamProfileBuilder.Element
if the segment curvature equal with the previous segment
CurveExtendData - Interface in nxopen.geometricutilities
CurveExtendData.LimitOptions - Class in nxopen.geometricutilities
Represents the curve extend options for associative basic curves
CurveExtensionBuilder - Interface in nxopen.geometricutilities
Spline extension builder class.
CurveExtensionBuilder.ExtensionOption - Class in nxopen.geometricutilities
Spline extension options
curveExtensionType() - Method in interface nxopen.features.TrimCurveBuilder
Returns the shape of the extension, if the curve to be trimmed is to be extended
to its bounding object(s)
License requirements: None.
curveFeature() - Method in interface nxopen.features.PartGeometryCopySelectBuilder
Returns the curve feature
License requirements: None.
CurveFeatureChainRule - Interface in nxopen
Represents a
SelectionIntentRule that collects end-to-end connected curves from the feature of the seed.
Manages curve features.
curveFeatureCollection() - Method in interface nxopen.features.FeatureCollection
Returns the CurveFeatureCollection instance belonging to this part .
CurveFeatureRule - Interface in nxopen
CurveFeatureTangentRule - Interface in nxopen
Represents a
SelectionIntentRule that collects tangent connected curves from the feature of the seed.
Returns the curve section
License requirements: None.
curveFinder() - Method in interface nxopen.features.OffsetMoveCurveBuilder
Returns the curve finder
License requirements: None.
curveFinder() - Method in interface nxopen.features.ResizeCurveBuilder
Returns the curve section
License requirements: None.
CurveFinderBuilder - Interface in nxopen.features
Represents a collection of curves and their relationships to other curves in the model .
curveFit() - Method in interface nxopen.features.CombinedProjectionBuilder
Returns the combined projection curveFit
License requirements: None.
curveFitData() - Method in interface nxopen.features.AOCSBuilder
Returns the curve fit settings
License requirements: solid_modeling ("SOLIDS MODELING")
.
curveFitData() - Method in interface nxopen.features.BridgeCurveBuilder
curveFitData() - Method in interface nxopen.features.BridgeCurveBuilderEx
Returns the curve fitting parameters
License requirements: None.
curveFitData() - Method in interface nxopen.features.CurveOnSurfaceBuilder
Returns the curve fitting parameters
License requirements: None.
curveFitData() - Method in interface nxopen.features.IntersectionCurveBuilder
Returns the curve fit settings
License requirements: None.
curveFitData() - Method in interface nxopen.features.LawExtensionBuilderEx
Returns the curve fit data
License requirements: None.
curveFitData() - Method in interface nxopen.features.Offset3DCurveBuilder
Returns the curve fit settings
License requirements: None.
curveFitData() - Method in interface nxopen.features.OffsetCurveBuilder
Returns the curve fit settings
License requirements: None.
curveFitData() - Method in interface nxopen.features.ProjectCurveBuilder
Returns the curve fit settings
License requirements: None.
curveFitData() - Method in interface nxopen.features.SectionCurveBuilder
Returns the curve fit settings
License requirements: None.
CurveFitData - Interface in nxopen.geometricutilities
Represents the curve fitting methods options.
curveFitData - Variable in class nxopen.uf.UFCurve.Proj1
curveFitData - Variable in class nxopen.uf.UFCurve.SectionGeneralData
CurveFitData() - Constructor for class nxopen.uf.UFModl.CurveFitData
CurveFitData(int, int, int) - Constructor for class nxopen.uf.UFModl.CurveFitData
CurveFitData.Join - Class in nxopen.geometricutilities
Represents the curve join method
CurveFitData.Method - Class in nxopen.geometricutilities
Represents the curve fitting method in the case of advanced fitting
CurveFitJoin - Interface in nxopen.geometricutilities
Represents the curve fit join data
.
CurveFitJoin.JoinMethod - Class in nxopen.geometricutilities
Represents the curve join method
curveFitJoinData() - Method in interface nxopen.features.AOCSBuilder
curveFitJoinData() - Method in interface nxopen.features.ProjectCurveBuilder
curveFitJoinOptions() - Method in interface nxopen.features.SectionCurveBuilder
Returns the curve fit join option
License requirements: None.
curveFitMethod() - Method in interface nxopen.features.CircularBlendCurveBuilder
Returns the curve fit method as
CurveFitOptions
License requirements: None.
Returns the curve fit method
License requirements: None.
curveFitMethod() - Method in interface nxopen.preferences.SessionModeling
Returns the curve fit method.
curveFitMethod() - Method in interface nxopen.SketchIntersectionCurveBuilder
Returns the curve fit method
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
curveFitMethod - Variable in class nxopen.uf.UFModl.CurveFitData
curveFitMethodUpdated() - Method in interface nxopen.SketchIntersectionCurveBuilder
This method needs to be called whenever the curve fit options changes
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
curveFitOption() - Method in interface nxopen.features.BridgeCurveBuilder
curveFitOptions() - Method in interface nxopen.features.IntersectionCurveBuilder
Returns the curve fit options
License requirements: solid_modeling ("SOLIDS MODELING")
.
curveFitOptions() - Method in interface nxopen.geometricutilities.CurveFitJoin
Returns the curve fit options
License requirements: None.
CurveFitOptions - Interface in nxopen.geometricutilities
Represents the curve fit data
.
CurveFitOptions.FitMethod - Class in nxopen.geometricutilities
Represents the curve fit method
curveFitProperties() - Method in interface nxopen.features.CurveOnSurfaceBuilder
Returns the curve fit properties
License requirements: solid_modeling ("SOLIDS MODELING")
.
curveForPerpendicularPlane() - Method in interface nxopen.features.SectionCurveBuilder
Returns the curve for perpendicular to curve type
License requirements: None.
CurveGroupRule - Interface in nxopen
curveItem() - Method in interface nxopen.cam.DriveChainItemBuilder
Returns the curve item
License requirements: cam_base ("CAM BASE")
.
curveJoinMethod() - Method in interface nxopen.geometricutilities.CurveFitData
Returns the curve join method
License requirements: None.
curveJoinMethod() - Method in interface nxopen.geometricutilities.CurveFitJoin
Returns the curve join method
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
.
CurveLength - Interface in nxopen.features
Represents a curve length feature.
CurveLengthBuilder - Interface in nxopen.features
curvelengthData() - Method in interface nxopen.features.CurveLengthBuilder
Returns the curvelength data
License requirements: solid_modeling ("SOLIDS MODELING")
.
curveLengthData() - Method in interface nxopen.features.shipdesign.ProfileBuilder
Returns the curve length data
License requirements: None.
CurveLengthData - Interface in nxopen.geometricutilities
Represents an CurveLength data.
CurveLengthDimensionBuilder - Interface in nxopen.annotations
CurveLimitsData - Interface in nxopen.geometricutilities
curveLineArc() - Method in interface nxopen.UFSession
curveList() - Method in interface nxopen.features.TrimCurveBuilder
Returns the list of curves with the pick points
License requirements: None.
curveList() - Method in interface nxopen.SketchAutoConstrainBuilder
Returns the selected curve list.
curveList() - Method in interface nxopen.SketchProjectBuilder
Returns the curve list.
curveList() - Method in interface nxopen.tooling.ScrapDesignBuilder
Returns the curve list served for boundary+sketch or close boundaries method
License requirements: None.
curveList - Variable in class nxopen.uf.UFCurve.AskCombineCurvesData
curveMaximumLength - Variable in class nxopen.facet.FacetingParameters
The maximum length of a curve, default is 1000.0
curveMaxLength - Variable in class nxopen.uf.UFFacet.Parameters
curveMode() - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder
Returns the curve specification mode
License requirements: None.
curveMode() - Method in interface nxopen.cam.InspectionScanCurveBuilder
Returns the curve specification mode
License requirements: None.
curveOffset() - Method in interface nxopen.cam.SurfaceContourBuilder
Returns the curve offset
License requirements: None.
CurveOnCurve - Interface in nxopen.motion
Represents a curve on curve
To create or edit an instance of this class, use
CurveOnCurveBuilder
Created in NX6.0.0
Represents a collection of curve on curve objects
To obtain an instance of this class, refer to
MotionManager
Created in NX6.0.0
Represents the CurveOnCurve Joint.
CurveOnCurveJointBuilder - Interface in nxopen.mechatronics
CurveOnCurveJointCollection - Interface in nxopen.mechatronics
Represents a collection of CurveOnCurve Joint.
curveOnCurveJoints() - Method in interface nxopen.mechatronics.PhysicsManager
curveOnCurves() - Method in interface nxopen.motion.MotionManager
Returns the Motion.CurveOnCurveCollection belonging to this part
Created in NX3.0.0
CurveOnSurface - Interface in nxopen.features
Represents a curve on surface feature
To create or edit an instance of this class, use
CurveOnSurfaceBuilder
Created in NX5.0.0
Curve On Surface builder class.
curveOptions() - Method in interface nxopen.features.CombinedProjectionBuilder
Returns the combined projection curveOptions
License requirements: None.
curveOptions() - Method in interface nxopen.features.CurveLengthBuilder
Returns the CurveOptions
License requirements: solid_modeling ("SOLIDS MODELING")
.
curveOptions() - Method in interface nxopen.features.JoinCurvesBuilder
Returns the Curve Options.
curveOptions() - Method in interface nxopen.features.TrimCurveBuilder
Returns the Curve Options
License requirements: None.
CurveOptions - Interface in nxopen.geometricutilities
Represents the curve options data
.
CurveOptions.InputCurve - Class in nxopen.geometricutilities
Represents the input curve options
curveOrFace() - Method in interface nxopen.features.DatumAxisBuilder
Returns the curve or face .
curveOrientation() - Method in interface nxopen.features.DatumAxisBuilder
Returns the orientation of vector on a curve.
curveParameterizedType() - Method in interface nxopen.motion.PointOnCurveBuilder
Returns the curve parameterized type
License requirements: None.
CurveParameterizedTypes - Class in nxopen.motion
Defines curve parameterized type
CurveParameterType - Class in nxopen
Specifies curve parameter type as arc length or percent arc length
curveParm - Variable in class nxopen.uf.UFCurve.IntersectInfo
curvePercentageList() - Method in interface nxopen.features.PointSetBuilder
Returns the curve percentage list.
curvePnt - Variable in class nxopen.uf.UFModlGeneral.AskCurveParmData
curvePoint - Variable in class nxopen.uf.UFCurve.IntersectInfo
curvePointList() - Method in interface nxopen.features.CurveFinderBuilder
Returns the curve and point collector
License requirements: None.
curvePoints() - Method in interface nxopen.drawings.ViewProjectionBuilder
Returns the curve and points
License requirements: None.
curvePointsBy() - Method in interface nxopen.features.PointSetBuilder
Returns the curve points definition setting.
curveProjectMethod - Variable in class nxopen.uf.UFModl.TrimObject
curveRange() - Method in interface nxopen.features.SmoothSplineBuilder
Returns the curve range
License requirements: None.
curveRange() - Method in interface nxopen.features.StudioXformBuilder
curveRange() - Method in interface nxopen.features.StudioXformBuilderEx
Returns the curve range
License requirements: None.
curveRange() - Method in interface nxopen.geometricanalysis.CurveAnalysisCombsBuilder
CurveRangeBuilder - Interface in nxopen.geometricutilities
Represents the curve range and anchor builder .
CurveRangeBuilder.AnchorPositionType - Class in nxopen.geometricutilities
Represents the anchor position type
curveRangeControl() - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
Returns the curve range
License requirements: studio_free_form ("STUDIO FREE FORM")
.
curveRefs - Variable in class nxopen.uf.UFCurve.AskProjCurvesData
curveRules() - Method in interface nxopen.blockstyler.CurveCollector
Returns the CurveRules
License requirements: None.
curveRules() - Method in interface nxopen.blockstyler.SectionBuilder
Returns the CurveRules
License requirements: None.
curveRules() - Method in interface nxopen.blockstyler.SuperPoint
Returns the CurveRules
License requirements: None.
curveRules() - Method in interface nxopen.blockstyler.SuperSection
Returns the CurveRules
License requirements: None.
CURVES - Static variable in class nxopen.annotations.BoundaryBuilder.SelectionMethod
Select boundaries by selecting curves
curves() - Method in interface nxopen.BasePart
Returns the CurveCollection instance belonging to this part .
CURVES - Static variable in class nxopen.cae.DisplaySectionType
CURVES - Static variable in class nxopen.cam.Preferences.BlankSelectionTypes
Deprecated.
Curves
CURVES - Static variable in class nxopen.cam.Preferences.CheckSelectionTypes
Deprecated.
Curves
CURVES - Static variable in class nxopen.cam.Preferences.PartSelectionTypes
Deprecated.
Curves
CURVES - Static variable in class nxopen.cam.Preferences.SelectionTypes
curves
CURVES - Static variable in class nxopen.cam.TeachmodeLinearMoveBuilder.EndPositionTypes
Curves
curves() - Method in interface nxopen.die.UncutRegionsBuilder
Returns the curves to check for uncut regions.
CURVES - Static variable in class nxopen.DisplayManager.ShowHideType
Show or hide curves
curves() - Method in interface nxopen.drawings.ViewCopyTo3dBuilder
Returns the select curves for source group
License requirements: None.
CURVES - Static variable in class nxopen.DxfdwgImporter.ImportCurvesAs
Convert curves as curves
curves - Variable in class nxopen.FaceRegionBoundaryRule.Data
Curves input to create this rule
CURVES - Static variable in class nxopen.features.shipdesign.ShipIntersectionsBuilder.Type
curves - Variable in class nxopen.features.shipdesign.StiffenerBuilder.CreatePathData
The curves defining the path of the profile that is being oriented.
curves() - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
Returns the curves selected that define the path of the stiffener system.
CURVES - Static variable in class nxopen.features.shipdesign.StiffenerSystemBuilder.Types
curves() - Method in interface nxopen.features.WrapBuilder
Returns the curves that are being wrapped or unwrapped.
curves() - Method in interface nxopen.geometricanalysis.sectionanalysis.CurveAlignedBuilder
Returns the curves
License requirements: None.
curves - Variable in class nxopen.Measurement.ArcLengthBetweenPointsData
The curves of the shortest path
curves() - Method in interface nxopen.ObjectTypeSelector
Returns the curves - This should be set to true if curves are desired in the output file
License requirements: None.
curves - Variable in class nxopen.RegionBoundaryRule.Data
Curves input to create this rule
CURVES - Static variable in class nxopen.Selection.SelectionType
Filter to select all curve types
curves() - Method in interface nxopen.SketchCornerBuilder
Returns the curves to make a corner
License requirements: None.
curves - Variable in class nxopen.uf.UFCurve.AskIsoclineData
curves - Variable in class nxopen.uf.UFCurve.CreateSilhouetteData
curves - Variable in class nxopen.uf.UFDraw.AskCurveGroupMembersData
curves - Variable in class nxopen.uf.UFDraw.BreakoutData
curves - Variable in class nxopen.uf.UFGdt.AskTagsData
curves - Variable in class nxopen.uf.UFGdt.TargetUdefArea
curves - Variable in class nxopen.uf.UFModeling.AskSubdivFaceParmsData
curves - Variable in class nxopen.uf.UFModl.SmcutoutData
curves - Variable in class nxopen.uf.UFModl.SmpunchCutSets
curves - Variable in class nxopen.uf.UFModl.SmpunchData
curves - Variable in class nxopen.uf.UFRoute.AskCrossCurvesData
CURVES - Static variable in class nxopen.weld.WeldFeatureOutput
Output only curves
curves - Variable in class nxopen.weld.WeldJointBuilder.NewlyCreatedJointsData
CURVES_AND_EDGES - Static variable in class nxopen.blockstyler.SelectObject.FilterType
Filter to select all curve and edge types
CURVES_AND_EDGES - Static variable in class nxopen.Selection.SelectionType
Filter to select all curve and edge types
CURVES_AND_POINTS - Static variable in class nxopen.Section.AllowTypes
Allow both points and curves in section
CURVES_EDGES - Static variable in class nxopen.tooling.FaceSplitBuilder.FaceSplitType
using curve or edge for Split Face
CURVES_HAVE_GAPS - Static variable in class nxopen.uf.UFConstants
CURVES_NOT_END_TO_END - Static variable in class nxopen.uf.UFConstants
CURVES_NOT_PLANAR - Static variable in class nxopen.uf.UFConstants
CURVES_ON_FACES - Static variable in class nxopen.features.TextBuilder.OnFacePlacementMethodOptions
Placement on curves or edges on the faces
CURVES_ONLY - Static variable in class nxopen.drawings.ViewWorkflowBuilder.Display
CURVES_ONLY - Static variable in class nxopen.preferences.SessionDrafting.EdgeFaceDisplayType
CURVES_PLANES_SHIP - Static variable in class nxopen.features.shipdesign.SeamBuilder.DefinitionMethods
Can use curves, planes or other ship structure to define the seam location.
CURVES_TO_COPY - Static variable in class nxopen.drawings.ViewCopyTo3dBuilder.BoundingBoxOption
curves to copy
curveScan() - Method in interface nxopen.cam.InspectionMethodBuilder
Returns a flag to indicate if scan curve is allowed
License requirements: None.
curveSection() - Method in interface nxopen.features.CurveFinderBuilder
curveSelection() - Method in interface nxopen.routing.ConnectedCurvesBuilder
Returns the list of selected curves.
curveSet - Variable in class nxopen.uf.UFSmd.FpPrefs
curveShaper() - Method in interface nxopen.features.IFormBuilder
Returns the iso-parameter curve shaper
License requirements: None.
CurveShapingBuilder - Interface in nxopen.geometricutilities
CurveShapingBuilder.InsertionMethodOptions - Class in nxopen.geometricutilities
Point insertion option
CurveShapingBuilder.MovementMethodType - Class in nxopen.geometricutilities
Curve parameter points movement types
CurveShapingBuilder.WCSOptionType - Class in nxopen.geometricutilities
WCS principal axis or plane types
curvesToChamfer() - Method in interface nxopen.SketchChamferBuilder
Returns the two lines for which a chamfer is to be created
License requirements: drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
curvesToMap() - Method in interface nxopen.features.shipdesign.ShellExpansionBuilder
Returns the curves to map
License requirements: None.
curvesToOffset() - Method in interface nxopen.features.OffsetCurveBuilder
Returns the curves to offset
License requirements: None.
curvesToOffset() - Method in interface nxopen.geometricutilities.SelectDividingObjectBuilder
Returns the curves to offset
License requirements: None.
curvesToOptimize() - Method in interface nxopen.features.OptimizeCurveBuilder
Returns the curves and points to optimize.
curvesToTrim() - Method in interface nxopen.features.TrimCurveBuilder
Returns the curves to trim
License requirements: None.
curveSuperSelect() - Method in interface nxopen.tooling.ReliefDesignBuilder
Returns the sketched curve profile used for creating or editing user defined relief.
curveTag - Variable in class nxopen.uf.UFDraw.AskSxlineSxsegData
curveTag - Variable in class nxopen.uf.UFDraw.BreakRegionBoundary
curveTag - Variable in class nxopen.uf.UFDraw.DefineBoundary
curveTag - Variable in class nxopen.uf.UFDraw.ViewBoundary
CurveTangentRule - Interface in nxopen
CurveTangentRule.Data - Class in nxopen
curveTargetFace() - Method in interface nxopen.features.shipdesign.WeldCut2Builder
Returns the curve target face.
curveToExtend() - Method in interface nxopen.die.AddendumSectionBuilder
Returns the constraint curve to extend.
curveToExtract() - Method in interface nxopen.features.subdivision.ExtractCagePolylineBuilder
Returns the curve to extract
License requirements: None.
curveTolerance() - Method in interface nxopen.preferences.PartVisualizationLine
Returns the curve tolerance.
curveToleranceFactor() - Method in interface nxopen.motion.CurveContactRecurdyn
curveToleranceFactorExpression() - Method in interface nxopen.motion.CurveContactRecurdyn
Returns the Curve Tolerance Factor expression
License requirements: None.
curveTrimRegionOption() - Method in interface nxopen.features.TrimCurveBuilder
Returns the portion of the curves to be trimmed
License requirements: None.
curveType() - Method in interface nxopen.drawings.DraftingCurveInfo
Returns the drafting curve type
License requirements: None.
curveType - Variable in class nxopen.mechatronics.CamProfileBuilder.Element
curve type
curveType() - Method in interface nxopen.mechatronics.PathConstraintFrameBuilder
Returns the curve type.
curveType() - Method in interface nxopen.SketchProjectBuilder
Returns the output curve type generated by the projection.
curveType - Variable in class nxopen.uf.UFCurve.LineArc
curveTypeEdges() - Method in interface nxopen.drawings.ViewProjectionBuilder
Returns the curve type edges in the setting group
License requirements: None.
curveTypePlane1() - Method in interface nxopen.drawings.ViewProjectionBuilder
Returns the curve type plane 1 in the setting group
License requirements: None.
curveTypePlane2() - Method in interface nxopen.drawings.ViewProjectionBuilder
Returns the curve type plane 2 in the setting group , if the type is set to
one plane, the second plane information is ignored
License requirements: None.
CUSHION_PROGRAM - Static variable in class nxopen.tooling.DefineCamBuilder.Types
Cushion Program cam type
cushionAngleA27() - Method in interface nxopen.HumanPosturePredictionBuilder
Returns the cushion angle A27 of seat data, it should be set for Class A driver, Class A front passenger
and Class A rear passenger
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
cushionBody() - Method in interface nxopen.tooling.DefineCamBuilder
Returns the cushion body, actually, it often is the bolster body to do the kinematic motion
License requirements: None.
cushionDirection() - Method in interface nxopen.tooling.DefineCamBuilder
Returns the cushion direction that the cushion body moves along
License requirements: None.
cushionFirmness() - Method in interface nxopen.HumanPosturePredictionBuilder
Returns the cushion firmness type: soft cushion, medium cushion or firm cushion
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
cushionName() - Method in interface nxopen.tooling.DefineCamBuilder
Returns the cushion name
License requirements: None.
CUSTOM - Static variable in class nxopen.annotations.PartsListBuilder.PartsListMainSymbolText
CUSTOM - Static variable in class nxopen.annotations.PartsListBuilder.PartsListReferenceSymbolText
CUSTOM - Static variable in class nxopen.annotations.TableCellStyleBuilder.CellFormatTypes
Custom
CUSTOM - Static variable in class nxopen.annotations.TableCellStyleBuilder.FormatType
Deprecated.
CUSTOM - Static variable in class nxopen.cae.xyplot.UnitSystem
Custom unit
CUSTOM - Static variable in class nxopen.cam.DmAmBuilder.AmCustomStartTypes
Area Milling Custom Start Custom
CUSTOM - Static variable in class nxopen.cam.DmBndBuilder.BndCustomStartTypes
Boundary Milling Custom Start Custom
CUSTOM - Static variable in class nxopen.cam.DmCmBuilder.DmCmCutPointType
custom
CUSTOM - Static variable in class nxopen.cam.MoveBuilder.Feed
Custom
CUSTOM - Static variable in class nxopen.cam.ProbeInspectBorebossMoveBuilder.Angle
Custom angles
CUSTOM - Static variable in class nxopen.cam.TurnAvoidancePathPointsBuilder.FeedrateModesTypes
Feed Rate: Axial then Radial
CUSTOM - Static variable in class nxopen.display.DatumPlaneGridBuilder.GridOrientationType
Grid size, location, and
orientation can be customized
using the manipulator controls
CUSTOM - Static variable in class nxopen.display.StudioImageCaptureBuilder.DrawingSizeEnumType
Use custom defined drawing size
CUSTOM - Static variable in class nxopen.display.TrueShadingBuilder.SHEDLightCollectionType
Custom lighting configuration
CUSTOM - Static variable in class nxopen.drawings.BordersAndZonesBuilder.ZoneMethod
Deprecated.
CUSTOM - Static variable in class nxopen.drawings.DetailViewBuilder.Types
Custom boundary (this should not be used unless the detail view already has a custom boundary
CUSTOM - Static variable in class nxopen.drawings.Method
CUSTOM - Static variable in class nxopen.drawings.View2dOrientBuilder.Type
custom method used
CUSTOM - Static variable in class nxopen.features.HolePackageBuilder.ThreadLengthOptions
Length is custom
CUSTOM - Static variable in class nxopen.features.sheetmetal.FlangeBuilder.WidthTypeOptions
The flange sketch has been edited after creation and may or may not conform to any of the above.
CUSTOM - Static variable in class nxopen.features.vehicledesign.BaseDataPassengerBuilder.SeatDirectionOptions
Specify a custom value for the seat position (in deg). 1 to 179: Turning the seat rightwards; 1 to 179: Turning the seat leftwards.
CUSTOM - Static variable in class nxopen.features.vehicledesign.VisionPlaneBuilder.CustomVisionAngle
customized
CUSTOM - Static variable in class nxopen.features.vehicledesign.WindshieldDatumBuilder.CustomVisionAngle
customized
CUSTOM - Static variable in class nxopen.formboard.FlipComponentBuilder.AxisType
Flip component by user defined custom axis
CUSTOM - Static variable in class nxopen.geometricutilities.EndHoleData.ThreadLengthOptions
Length is custom
CUSTOM - Static variable in class nxopen.HumanData.StatureType
Indicate stature value is the actual height height of the human
CUSTOM - Static variable in class nxopen.HumanData.WeightType
Indicate weight value is the actual weight of the human
CUSTOM - Static variable in class nxopen.PrintBuilder.PaperSize
Custom paper size, this requires the Custom Paper field to be set with the actual paper size ID
custom - Variable in class nxopen.uf.UFCgm.CustomWidths
CUSTOM1 - Static variable in class nxopen.weld.DatumCommonBuilder.CustomTypes
A datum surface or pin specified in the customer defaults by the Custom1 type.
CUSTOM1 - Static variable in class nxopen.weld.PointMarkBuilder.WeldTypes
Custom 1 as defined in customer defaults
CUSTOM1_POINT_FEATURE - Static variable in class nxopen.uf.UFConstants
CUSTOM1POINT - Static variable in class nxopen.weld.WeldAdvisorCustomerDefault
Custom1 Point
CUSTOM1POINT - Static variable in class nxopen.weld.WeldFeatureSetType
Custom1 Point
CUSTOM1POINT_FEATURE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
CUSTOM2 - Static variable in class nxopen.weld.DatumCommonBuilder.CustomTypes
A datum surface or pin specified in the customer defaults by the Custom2 type.
CUSTOM2 - Static variable in class nxopen.weld.PointMarkBuilder.WeldTypes
Custom 2 as defined in customer defaults
CUSTOM2_POINT_FEATURE - Static variable in class nxopen.uf.UFConstants
CUSTOM2POINT - Static variable in class nxopen.weld.WeldAdvisorCustomerDefault
Custom2 Point
CUSTOM2POINT - Static variable in class nxopen.weld.WeldFeatureSetType
Custom2 Point
CUSTOM2POINT_FEATURE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
CUSTOM3 - Static variable in class nxopen.weld.DatumCommonBuilder.CustomTypes
A datum surface or pin specified in the customer defaults by the Custom3 type.
CUSTOM3 - Static variable in class nxopen.weld.PointMarkBuilder.WeldTypes
Custom 3 as defined in customer defaults
CUSTOM3_POINT_FEATURE - Static variable in class nxopen.uf.UFConstants
CUSTOM3POINT - Static variable in class nxopen.weld.WeldAdvisorCustomerDefault
Custom3 Point
CUSTOM3POINT - Static variable in class nxopen.weld.WeldFeatureSetType
Custom3 Point
CUSTOM3POINT_FEATURE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
CUSTOM3WIDTHS - Static variable in class nxopen.uf.UFCgm.Widths
CUSTOM3WIDTHS - Static variable in class nxopen.uf.UFPlot.Widths
CUSTOM4 - Static variable in class nxopen.weld.DatumCommonBuilder.CustomTypes
A datum surface or pin specified in the customer defaults by the Custom4 type.
CUSTOM4 - Static variable in class nxopen.weld.PointMarkBuilder.WeldTypes
Custom 4 as defined in customer defaults
CUSTOM4_POINT_FEATURE - Static variable in class nxopen.uf.UFConstants
CUSTOM4POINT - Static variable in class nxopen.weld.WeldAdvisorCustomerDefault
Custom4 Point
CUSTOM4POINT - Static variable in class nxopen.weld.WeldFeatureSetType
Custom4 Point
CUSTOM4POINT_FEATURE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
CUSTOM5 - Static variable in class nxopen.weld.DatumCommonBuilder.CustomTypes
A datum surface or pin specified in the customer defaults by the Custom5 type.
CUSTOM5 - Static variable in class nxopen.weld.PointMarkBuilder.WeldTypes
Custom 5 as defined in customer defaults
CUSTOM5_POINT_FEATURE - Static variable in class nxopen.uf.UFConstants
CUSTOM5POINT - Static variable in class nxopen.weld.WeldAdvisorCustomerDefault
Custom5 Point
CUSTOM5POINT - Static variable in class nxopen.weld.WeldFeatureSetType
Custom5 Point
CUSTOM5POINT_FEATURE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
CUSTOM6 - Static variable in class nxopen.weld.DatumCommonBuilder.CustomTypes
A datum surface or pin specified in the customer defaults by the Custom6 type.
CUSTOM7 - Static variable in class nxopen.weld.DatumCommonBuilder.CustomTypes
A datum surface or pin specified in the customer defaults by the Custom7 type.
CUSTOM_DATA_GOUGING_DRIVE_OBSOLETE - Static variable in class nxopen.cam.CAMObject.Attr
CUSTOM_DATA_GOUGING_OBSOLETE - Static variable in class nxopen.cam.CAMObject.Attr
CUSTOM_DATA_GOUGING_PART_OBSOLETE - Static variable in class nxopen.cam.CAMObject.Attr
CUSTOM_DATA_IGNORE_LOOPS_OBSOLETE - Static variable in class nxopen.cam.CAMObject.Attr
CUSTOM_DATA_IGNORE_LOOPS_REMOVED - Static variable in class nxopen.cam.CAMObject.Attr
CUSTOM_DEFINED - Static variable in class nxopen.features.shipdesign.EdgeCutBuilder.ArraySpacing
The user can specify a custom amount of space between the cuts
CUSTOM_DEFINED - Static variable in class nxopen.features.shipdesign.VentilationHoles2Builder.ArraySpacing
The user can specify a custom amount of space between the holes
CUSTOM_GRADUATED - Static variable in class nxopen.display.TrueShadingBuilder.BgdType
Customized graduated colored background
CUSTOM_IMAGE - Static variable in class nxopen.display.TrueShadingBuilder.BgdImageType
Custom image background
CUSTOM_IMAGE - Static variable in class nxopen.display.TrueShadingBuilder.EnvironmentMapType
Custom Image Reflection
CUSTOM_PALETTE - Static variable in class nxopen.CGMBuilder.Color
Custom Palette, uses custom colors defined in CDF
CUSTOM_PALETTE - Static variable in class nxopen.CGMBuilder.Width
Custom palette, uses custom widths defined in WidthDefinition
CUSTOM_PALETTE - Static variable in class nxopen.PlotColorsWidthsBuilder.Color
Custom Palette
CUSTOM_PALETTE - Static variable in class nxopen.PlotColorsWidthsBuilder.Width
Custom palette
CUSTOM_PALETTE - Static variable in class nxopen.PrintPDFBuilder.Color
Custom Palette
CUSTOM_PALETTE - Static variable in class nxopen.PrintPDFBuilder.Width
Custom palette
CUSTOM_PALETTE_COLORS - Static variable in class nxopen.uf.UFCgm.Colors
CUSTOM_PALETTE_COLORS - Static variable in class nxopen.uf.UFPlot.Colors
CUSTOM_PALETTE_WIDTHS - Static variable in class nxopen.uf.UFCgm.Widths
CUSTOM_PALETTE_WIDTHS - Static variable in class nxopen.uf.UFPlot.Widths
CUSTOM_PLAIN - Static variable in class nxopen.display.TrueShadingBuilder.BgdType
Customized plain colored background
CUSTOM_SIZE - Static variable in class nxopen.uf.UFDraw.SizeState
CUSTOM_SYMBOL - Static variable in class nxopen.annotations.PmiFilterByType.Type
Indicates a PMI custom symbol type
CUSTOM_SYMBOL - Static variable in class nxopen.DxfdwgImporter.ImportBlocksAs
Convert blocks as custom symbol dimensions
CUSTOM_THREE_WIDTHS - Static variable in class nxopen.CGMBuilder.Width
Custom Three Widths, uses custom widths defined in WidthDefinition
CUSTOM_THREE_WIDTHS - Static variable in class nxopen.PlotColorsWidthsBuilder.Width
Custom Three Widths
CUSTOM_THREE_WIDTHS - Static variable in class nxopen.PrintPDFBuilder.Width
Custom Three Widths
CUSTOM_UNIT - Static variable in class nxopen.MeasureBodies.AnalysisUnit
CUSTOM_WIDTH_TYPE - Static variable in class nxopen.uf.UFNxsm.FlangeWidthOption
customAboveLength() - Method in interface nxopen.weld.DatumCommonBuilder
Returns the length above the datum reference point.
customAngleTolerance() - Method in interface nxopen.drawings.ShadingViewStyle
Returns the custom angle tolerance.
customAngleTolerance() - Method in interface nxopen.preferences.ShadingViewPreferences
Returns the custom angle tolerance.
customAxis() - Method in interface nxopen.formboard.FlipComponentBuilder
customBoundaryDataList() - Method in interface nxopen.cam.WedmBasedGeomBuilder
Returns the Custom Boundary Data List
License requirements: cam_base ("CAM BASE")
.
customBoundaryDataList() - Method in interface nxopen.cam.WedmGeomBuilder
Returns the custom boundary data list
License requirements: cam_base ("CAM BASE")
.
customBoundaryDataList() - Method in interface nxopen.cam.WedmOperationBuilder
Returns the custom boundary data list
License requirements: cam_base ("CAM BASE")
.
CustomBracket - Interface in nxopen.features.shipdesign
Represents a custom bracket feature
To create or edit an instance of this class, use
CustomBracketBuilder
Created in NX7.5.0
Creation method used to define the placement of the bracket
CustomColors() - Constructor for class nxopen.uf.UFCgm.CustomColors
CustomColors(UFCgm.Color[]) - Constructor for class nxopen.uf.UFCgm.CustomColors
customCylinderAbove() - Method in interface nxopen.weld.WeldPointBuilder
Returns the distance the custom cylinder should be created above the
weld point
License requirements: ugweld ("UG WELD")
.
customDriveCurve() - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder
Returns the custom drive curve builder
License requirements: None.
customEdgeTolerance() - Method in interface nxopen.drawings.ShadingViewStyle
Returns the custom edge tolerance.
customEdgeTolerance() - Method in interface nxopen.preferences.ShadingViewPreferences
Returns the custom edge tolerance.
customer() - Method in interface nxopen.tooling.QuickQuotationBuilder
Returns the customer.
CUSTOMER_DEFAULT - Static variable in class nxopen.assemblies.ClearanceSet.ReanalyzeOutOfDateExcludedPairs
CUSTOMER_DEFAULT - Static variable in class nxopen.features.shipdesign.ManufacturingStockBuilder.StockDataSourceType
Initial data will be read from the customer default
CUSTOMER_DEFINED_DATA - Static variable in class nxopen.features.vehicledesign.TireEnvelopeBuilder.EnvelopeOffsetMethod
Use the data that the user defines.
customerValue() - Method in interface nxopen.annotations.CustomerValueBusinessModifierBuilder
Returns the customer value
License requirements: None.
CustomerValueBusinessModifier - Interface in nxopen.annotations
Represents business modifier that applies customer values such as CTQ (Critical To Quality),
KC (Key Characteristic) to a PMI.
CustomerValueBusinessModifierBuilder - Interface in nxopen.annotations
customFaceTolerance() - Method in interface nxopen.drawings.ShadingViewStyle
Returns the custom face tolerance.
customFaceTolerance() - Method in interface nxopen.preferences.ShadingViewPreferences
Returns the custom face tolerance.
customFeed() - Method in interface nxopen.cam.BoundaryTurnMemberSet
Returns the custom feed rate
License requirements: None.
customFeed() - Method in interface nxopen.cam.GeometrySet
Returns the flag whether this set has custom feed rate activated
License requirements: None.
customFeed() - Method in interface nxopen.cam.SurfaceDriveGeometrySet
Returns the flag whether this set has custom feed rate activated
License requirements: None.
customFeedRate() - Method in interface nxopen.cam.BoundaryMillingMemberSet
Returns the flag whether this boundary has custom feed rate activated
License requirements: None.
customFeedRate() - Method in interface nxopen.cam.BoundaryMillingSet
Returns the flag whether this boundary has custom feed rate activated
License requirements: None.
customfeedrateunit - Variable in class nxopen.cam.TurnAvoidancePathPointsBuilder.PointData
the feedrateUnitColumn
customfeedrateunit - Variable in class nxopen.cam.TurnAvoidancePathPointsBuilder.PointListData
the feedrateUnitColumn
customfeedratevalue - Variable in class nxopen.cam.TurnAvoidancePathPointsBuilder.PointData
the feedrateColumn
customfeedratevalue - Variable in class nxopen.cam.TurnAvoidancePathPointsBuilder.PointListData
the feedrateColumn
customFeedType() - Method in interface nxopen.cam.BoundaryTurnMemberFeed
Returns the corner feed rate type
License requirements: None.
customHumanFileName() - Method in interface nxopen.features.HumanBuilder
Returns the custom human figure file name
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
customizationUpdateFromObject(CAMObject, CAMObject) - Method in interface nxopen.cam.CAMSetup
Customize from Object
License requirements: cam_base ("CAM BASE")
.
customizationUpdateFromTemplate(CAMObject[]) - Method in interface nxopen.cam.CAMSetup
Customize from Template
License requirements: cam_base ("CAM BASE")
.
CUSTOMIZE - Static variable in class nxopen.preferences.GeneralToleranceOption
Customize
CUSTOMIZE - Static variable in class nxopen.preferences.PartVisualizationShade.AdvViewToleranceType
Customize.
CUSTOMIZE - Static variable in class nxopen.preferences.PartVisualizationShade.ShadedViewToleranceType
Customize.
CUSTOMIZE - Static variable in class nxopen.preferences.ShadingToleranceOption
Customize
CUSTOMIZE_DIE_BASE - Static variable in class nxopen.tooling.DieBaseBuilder.Types
customize die base
CUSTOMIZE_WIDTH - Static variable in class nxopen.features.sheetmetal.SheetmetalManagerFlangeWidthOption
customize width
CUSTOMIZED - Static variable in class nxopen.cae.Post.ShowHeader
CUSTOMIZED - Static variable in class nxopen.features.vehicledesign.ReflectionDataBuilder.ResolutionType
user defined
customizedViewLabel() - Method in interface nxopen.drawings.ViewDetailLabelBuilder
Returns the customized view label
License requirements: None.
customizedViewLabel() - Method in interface nxopen.drawings.ViewLabelBuilder
Returns the customized view label
License requirements: None.
customizedViewLabel() - Method in interface nxopen.drawings.ViewSectionLabelBuilder
Returns the customized view label
License requirements: None.
CustomLoops - Interface in nxopen.cam
CustomLoopSet - Interface in nxopen.cam
CustomLoopSetList - Interface in nxopen.cam
Represents a list of objects.
CustomManager - Interface in nxopen.weld
Represents weld interface to customize the creation of welding joint features.
CustomManager.DatumIconHandler - Interface in nxopen.weld
Method called from the part navigator to define the datum surface and pin icon.
CustomManager.ModifyFeatureHandler - Interface in nxopen.weld
User defined method that is called whenever a welding joints are created or edited
CustomManager.PipeJointSetType - Interface in nxopen.weld
User defined method that is called whenever a welding joint is created.
CustomManager.PointExitHandler - Interface in nxopen.weld
User defined method that is called whenever a welding features are created through Weld Point command.
CustomManager.VariableBevelHandler - Interface in nxopen.weld
User defined method that returns the angle divisions for a variable bevel.
CustomManager.WeldJointHandler - Interface in nxopen.weld
User defined method that is called whenever a welding joint is created or updated
customMemberData() - Method in interface nxopen.cam.RoughFinishTurningBuilder
Returns the Custom Member Data type
License requirements: None.
customMemberDataDistance() - Method in interface nxopen.cam.RoughFinishTurningBuilder
Returns the Custom Member Data Distance
License requirements: None.
customMessage() - Method in interface nxopen.visualreporting.GroupLabel
customMessage() - Method in interface nxopen.visualreporting.Property
Returns the custom message of this property.
customMessage() - Method in interface nxopen.visualreporting.ResultCategory
customOffset() - Method in interface nxopen.cam.BoundaryMemberSet
Returns the flag whether this boundary has custom offset activated
License requirements: None.
customOffset() - Method in interface nxopen.cam.BoundarySet
Returns the flag whether this boundary has custom offset activated
License requirements: None.
customOrientationMethod() - Method in interface nxopen.drawings.View2dOrientBuilder
Returns the custom orientation method
License requirements: None.
customPaper() - Method in interface nxopen.PrintBuilder
Returns the custom paper.
customPartBoundary() - Method in interface nxopen.cam.RoughFinishTurningBuilder
Returns the custom part boundary builder
License requirements: None.
customPartOffset() - Method in interface nxopen.cam.GeometrySet
Returns the flag whether this set has custom part offset activated
License requirements: None.
CustomPoint() - Constructor for class nxopen.uf.UFCamgeom.CustomPoint
CustomPoint(Tag, double[], double, double, double) - Constructor for class nxopen.uf.UFCamgeom.CustomPoint
CustomPopupMenu - Interface in nxopen
Represents Custom Popup Menu Item class .
CustomPopupMenuHandler - Interface in nxopen
Represents Custom Popup Menu Handler class .
CustomPopupMenuHandler.AddCustomPopupMenuCallback - Interface in nxopen
This callback will be invoked by NX application when a RMB click is performed on
NX Tc Navigator application.
CustomPopupMenuHandler.CustomPopupMenuInvokedCallback - Interface in nxopen
This callback will be invoked by NX when user clicks on a custom menu item.
customPopupMenuInvokedCallback() - Method in interface nxopen.CustomPopupMenuHandler.CustomPopupMenuInvokedCallback
This callback will be invoked by NX when user clicks on a custom menu item.
CustomPopupMenuItem - Interface in nxopen
Represents Custom Popup Menu Item class .
customRadius() - Method in interface nxopen.weld.DatumCommonBuilder
Returns the radius of the solid sphere, cylinder or cone created.
customRadius() - Method in interface nxopen.weld.WeldPointBuilder
Returns the radius to create the sphere, cylinder, or cone with
License requirements: ugweld ("UG WELD")
.
customScratchDirectory() - Method in interface nxopen.cae.optimization.TBSOutputControlOptions
Returns the custom cratch directory for solving
License requirements: None.
customShapeSizeLowerLimit() - Method in interface nxopen.shapesearch.ShapeSearchBuilder
Returns the custom shape size lower limit to be set for search.
customShapeSizeUpperLimit() - Method in interface nxopen.shapesearch.ShapeSearchBuilder
Returns the custom shape size upper limit to be set for search.
customStock() - Method in interface nxopen.cam.BoundaryMillingMemberSet
Returns the flag whether this boundary member has custom stock activated
License requirements: None.
customStock() - Method in interface nxopen.cam.BoundaryMillingSet
Returns the flag whether this boundary has custom stock activated
License requirements: None.
customStock() - Method in interface nxopen.cam.BoundaryTurnSet
Returns the flag whether this boundary has custom stock activated
License requirements: None.
customStock() - Method in interface nxopen.cam.GeometrySet
Returns the flag whether this set has custom stock activated
License requirements: None.
customStock() - Method in interface nxopen.cam.SurfaceDriveGeometrySet
Returns the flag whether this set has custom stock activated
License requirements: None.
CustomSymbol - Interface in nxopen.annotations
CustomSymbol() - Constructor for class nxopen.uf.UFDrf.CustomSymbol
CustomSymbol(Tag[], int, UFDrf.CustomSymbolText[], int, Tag, UFDrf.SymbolConnection[], int, UFDrf.Leader, double, double, double[]) - Constructor for class nxopen.uf.UFDrf.CustomSymbol
CustomSymbolCollection - Interface in nxopen.annotations
CustomSymbolData - Interface in nxopen.annotations
CustomSymbolLeaderBuilder - Interface in nxopen.annotations
This class is responsible for defining the origin and leader for custom
symbol objects.
customSymbols() - Method in interface nxopen.annotations.AnnotationManager
CustomSymbol collection .
customSymbolScale() - Method in interface nxopen.annotations.TextWithSymbolsBuilder
Returns the scale of the custom symbols
License requirements: None.
customSymbolSmashToSketch() - Method in interface nxopen.preferences.PartDrafting
Returns the custom symbol smash behavior.
CustomSymbolText() - Constructor for class nxopen.uf.UFDrf.CustomSymbolText
CustomSymbolText(Tag, UFDrf.CustomSymbolTextType, String, double, double, double, String[], int, int, String) - Constructor for class nxopen.uf.UFDrf.CustomSymbolText
CustomSymbolTextData - Interface in nxopen.annotations
CustomTextStyleSetting - Interface in nxopen.cae.xyplot
Represents the text content definition in title options
Not support KF.
customTolerance() - Method in interface nxopen.cam.GeometrySet
Returns the flag whether this set has custom tolerances activated
License requirements: None.
customTolerance() - Method in interface nxopen.cam.SurfaceDriveGeometrySet
Returns the flag whether this set has custom tolerances activated
License requirements: None.
customTotalCylinderLength() - Method in interface nxopen.weld.WeldPointBuilder
Returns the total length of the cylinder to be created.
customTotalLength() - Method in interface nxopen.weld.DatumCommonBuilder
Returns the total length of the cylinder or cone along the direction axis.
customType() - Method in interface nxopen.weld.DatumCommonBuilder
Returns the custom datum type.
customType() - Method in interface nxopen.weld.DatumIconBuilder
Returns the custom datum type from the customer defaults that was used.
customTypeName() - Method in interface nxopen.weld.DatumCommonBuilder
Returns the custom name used to create the datum.
CustomViewSettingsBuilder - Interface in nxopen.drawings
this class represents the "this class represents Drawings.CustomViewSettingsBuilder..
customViewSettingsBuilder() - Method in interface nxopen.drawings.ViewCreationWizardBuilder
CustomViewSettingsBuilder.Features - Class in nxopen.drawings
the options for small features
CustomViewSettingsBuilder.Font - Class in nxopen.drawings
the options for all the fonts used in the custom view settings dialog
CustomViewSettingsBuilder.Interfering - Class in nxopen.drawings
the options for interfering curves
CustomViewSettingsBuilder.ThreadStandards - Class in nxopen.drawings
the thread standards options
CustomViewSettingsBuilder.Width - Class in nxopen.drawings
the width options for all the line width used in the customize view settings dialog
CustomWidth - Interface in nxopen
CustomWidths() - Constructor for class nxopen.uf.UFCgm.CustomWidths
CustomWidths(int, UFCgm.WidthUse, UFCgm.WidthSingle, double, int, UFCgm.WidthCustom[], UFCgm.WidthColor[]) - Constructor for class nxopen.uf.UFCgm.CustomWidths
customXAngle() - Method in interface nxopen.drawings.View2dOrientBuilder
Returns the orientation angle around the X axis
License requirements: None.
customYAngle() - Method in interface nxopen.drawings.View2dOrientBuilder
Returns the orientation angle around the Y axis
License requirements: None.
customZAngle() - Method in interface nxopen.drawings.View2dOrientBuilder
Returns the orientation angle around the Z axis
License requirements: None.
CUT - Static variable in class nxopen.cam.AcrossVoids.MotionTypes
Cut
CUT - Static variable in class nxopen.cam.MoveBuilder.Motion
Cut
cut(int[]) - Method in interface nxopen.cam.ObjectContainer
Cut CAM Objects
License requirements: None.
cut() - Method in interface nxopen.cam.PathDisplayColors
Returns the color cut
License requirements: None.
CUT - Static variable in class nxopen.cam.SmallAreaAvoidance.StatusTypes
Status-Cut
CUT - Static variable in class nxopen.cam.TurnAvoidancePathPointsBuilder.FeedrateModesTypes
Feed Rate: Axial then Radial
CUT - Static variable in class nxopen.drafting.CutCopyPasteBuilder.TypeOperation
Cut type
CUT - Static variable in class nxopen.drawings.SectionLineSegmentBuilder.Types
CUT - Static variable in class nxopen.drawings.SectionLineSegmentPointBuilder.SegmentTypes
cut() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
Returns the cut
License requirements: None.
CUT_AND_PASTE - Static variable in class nxopen.features.AdmMoveFaceBuilder.MoveOptionType
Option equates to enhanced Move Face with Cut or Copy Face with Paste Face and Delete Face without heal.
CUT_AREA - Static variable in class nxopen.cam.Preferences.GeometryTypes
cut area
CUT_AREA - Static variable in class nxopen.uf.UFCam.GeomType
CUT_AREA_GEOM_COLOR - Static variable in class nxopen.uf.UFCamPref.CamPref
CUT_AREA_GEOM_TYPE - Static variable in class nxopen.uf.UFCamPref.CamPref
CUT_BODY - Static variable in class nxopen.features.subdivision.StartSymmetricModelingBuilder.MirrorProcedureOption
Deprecated.
Cuts the mesh
CUT_DOWN - Static variable in class nxopen.cam.CutParametersPlungeDirectionTypes
Cut Down
CUT_EDGE_LENGTH - Static variable in class nxopen.cam.TurnToolBuilder.SizeOptions
Size option: Cut Edge length
CUT_FEED_RATE - Static variable in class nxopen.cam.FeedsBuilder.RecalcuateBasedOn
cut feed rate
CUT_FLOOR - Static variable in class nxopen.features.AnalyzePocketBuilder.AngledWallSolutions
One pass End Mill.
CUT_FLOOR - Static variable in class nxopen.features.BlendPocketBuilder.AngledWallSolutions
One pass End Mill.
CUT_FLOOR_AND_SWARF_CUT_WALL - Static variable in class nxopen.features.AnalyzePocketBuilder.AngledWallSolutions
Two pass End Mill.
CUT_FLOOR_AND_SWARF_CUT_WALL - Static variable in class nxopen.features.BlendPocketBuilder.AngledWallSolutions
Two pass End Mill.
CUT_LATER - Static variable in class nxopen.cam.RoughTurningBuilder.ReversalModeTypes
Reversal mode: Cut Later
CUT_PERCENT - Static variable in class nxopen.cam.FeedRateUnit
use cut percent as feed rate unit
CUT_PLANE_TO_CLEARANCE - Static variable in class nxopen.cam.NcmPlanarBuilder.FinalTypes
cut plane to clearance
CUT_PLANE_TO_CLEARANCE - Static variable in class nxopen.cam.NcmPlanarBuilder.InitialTypes
cut plane to clearance
CUT_PLANE_TO_CLEARANCE - Static variable in class nxopen.cam.NcmPlanarBuilder.TransferBetweenRegionsTypes
cut plane to clearance
CUT_PLANE_TO_CLEARANCE - Static variable in class nxopen.cam.NcmPlanarBuilder.TransferWithinLevelsTypes
cut plane to clearance
CUT_PLANE_TO_CLEARANCE - Static variable in class nxopen.cam.NcmTransfer.TransferTypes
cut plane to clearance
CUT_REGION_START_TYPE - Static variable in class nxopen.uf.UFCamgeom.CustomPointType
CUT_REGIONS_LOCATED_ON_BOTH_SIDES_OF_CENTERLINE - Static variable in class nxopen.uf.UFTurn.CutRegionsLocation
CUT_REGIONS_LOCATED_ON_FAR_SIDE_OF_CENTERLINE - Static variable in class nxopen.uf.UFTurn.CutRegionsLocation
CUT_REGIONS_LOCATED_ON_NEAR_SIDE_OF_CENTERLINE - Static variable in class nxopen.uf.UFTurn.CutRegionsLocation
CUT_REGIONS_LOCATED_UNDEFINED - Static variable in class nxopen.uf.UFTurn.CutRegionsLocation
CUT_TO_SHAPE - Static variable in class nxopen.features.shipdesign.BuiltUpManModeBuilder.BuiltUpManModeType
CUT_TO_SHOULDER - Static variable in class nxopen.cam.CutParametersCleanupControlTypes
Cleanup control: Cut to Shoulder
CutAngle - Interface in nxopen.cam
Represents a boundary cut angle ci Builder .
cutAngle() - Method in interface nxopen.cam.DmAmBuilder
Returns the cut angle
License requirements: None.
cutAngle() - Method in interface nxopen.cam.DmBndBuilder
Returns the cut angle ci builder
License requirements: None.
cutAngle() - Method in interface nxopen.cam.MillCutParameters
Returns the cut angle
License requirements: None.
CutAngle.Types - Class in nxopen.cam
Available types for cut angle type in boundary cut angle customizable item
cutAngleBuilder() - Method in interface nxopen.cam.AreaMillingNonSteepContainment
Returns the cut angle
License requirements: None.
cutAreaColor() - Method in interface nxopen.cam.Preferences
Returns the cut area color
License requirements: None.
cutAreaExtensionDistance() - Method in interface nxopen.cam.MillCutParameters
Returns the cut area extension distance builder
License requirements: None.
cutAreaGeomColor - Variable in class nxopen.uf.UFCam.Preferences
cutAreaGeometry() - Method in interface nxopen.cam.MillAreaGeomBuilder
Returns the cut area geometry builder
License requirements: None.
cutAreaGeometry() - Method in interface nxopen.cam.PlanarOperationBuilder
Returns the cut area geometry builder
License requirements: None.
cutAreaGeometry() - Method in interface nxopen.cam.SurfaceContourBuilder
Returns the cut area geometry builder
License requirements: None.
cutAreaGeomType - Variable in class nxopen.uf.UFCam.Preferences
cutAreaSelection() - Method in interface nxopen.cam.Preferences
cutAttributes(FamilyAttribute[]) - Method in interface nxopen.partfamily.TemplateManager
Cut selected attributes of a part family.
cutbackOption() - Method in interface nxopen.routing.ModelTerminalsBuilder
Returns the cutback option
License requirements: routing_harness ("Routing Harness")
.
cutBand() - Method in interface nxopen.cam.BlendFinish
Returns the Cut Band
License requirements: None.
CutBand - Interface in nxopen.cam
Cut Band Builder .
CutBand.Types - Class in nxopen.cam
Available types for Cut Band .
cutBelowOverhangingBlank() - Method in interface nxopen.cam.MillCutParameters
Returns the Cut Below Overhanging Blank Method
License requirements: cam_base ("CAM BASE")
.
cutBelowToolContact() - Method in interface nxopen.cam.MillCutParameters
Returns the cut below tool contact setting
License requirements: None.
cutBetweenLevels() - Method in interface nxopen.cam.FlowCutSteepContainment
Returns the cut between levels
License requirements: None.
cutBetweenLevels() - Method in interface nxopen.cam.MillCutParameters
Returns the cut between levels
License requirements: None.
cutbody - Variable in class nxopen.CutViewCollection.IsUncutBodyOfViewData
Corresponding Cut body
cutColor() - Method in interface nxopen.features.MasterCutBuilder
Returns the cut face color
License requirements: solid_modeling ("SOLIDS MODELING")
.
Cutcom - Interface in nxopen.cam
Represents a
Cutcom
Created in NX6.0.2
the cutcom
cutcom - Variable in class nxopen.cam.MillingTrackpointBuilder.TrackPointData
the cutcom
cutcom() - Method in interface nxopen.cam.NcmTurningBuilder
Returns the cutter compensation builder
License requirements: None.
cutcom - Variable in class nxopen.uf.UFCutter.TrackingPointData
cutcom - Variable in class nxopen.uf.UFCutter.TurnTrackingPointData
Cutcom() - Constructor for class nxopen.uf.UFPath.Cutcom
Cutcom(UFPath.CutcomMode, UFPath.PlaneType, UFPath.CutcomOn, UFPath.CutcomOff, int, boolean, boolean) - Constructor for class nxopen.uf.UFPath.Cutcom
Cutcom.Types - Class in nxopen.cam
Available types for cutter compensation in planar milling
CUTCOM_LEFT - Static variable in class nxopen.uf.UFPath.CutcomMode
CUTCOM_MODE_LAST_ELEMENT - Static variable in class nxopen.uf.UFPath.CutcomMode
CUTCOM_OFF - Static variable in class nxopen.uf.UFPath.CutcomMode
CUTCOM_OFF_AFTER_MOTION - Static variable in class nxopen.uf.UFPath.CutcomOff
CUTCOM_OFF_AFTER_RETRACT - Static variable in class nxopen.uf.UFPath.CutcomOff
CUTCOM_OFF_BEFORE_RETRACT - Static variable in class nxopen.uf.UFPath.CutcomOff
CUTCOM_OFF_LAST_ELEMENT - Static variable in class nxopen.uf.UFPath.CutcomOff
CUTCOM_ON - Static variable in class nxopen.uf.UFPath.CutcomMode
CUTCOM_ON_AFTER_ENGAGE - Static variable in class nxopen.uf.UFPath.CutcomOn
CUTCOM_ON_BEFORE_ENGAGE - Static variable in class nxopen.uf.UFPath.CutcomOn
CUTCOM_ON_BEFORE_MOTION - Static variable in class nxopen.uf.UFPath.CutcomOn
CUTCOM_ON_LAST_ELEMENT - Static variable in class nxopen.uf.UFPath.CutcomOn
CUTCOM_RIGHT - Static variable in class nxopen.uf.UFPath.CutcomMode
cutcomMinimumAngle() - Method in interface nxopen.cam.NcmHoleMachining
Returns the cutter compensation minimum angle
License requirements: None.
cutcomMinimumAngle() - Method in interface nxopen.cam.NcmPlanarBuilder
Returns the cutter compensation minimum angle
License requirements: None.
cutcomMinimumMove() - Method in interface nxopen.cam.NcmHoleMachining
Returns the cutter compensation minimum move builder (inheritable tool dep)
License requirements: None.
cutcomMinimumMoveBuilder() - Method in interface nxopen.cam.NcmPlanarBuilder
Returns the cutter compensation minimum move builder (inheritable tool dep)
License requirements: None.
cutcomMode - Variable in class nxopen.uf.UFPath.Cutcom
cutcomOff() - Method in interface nxopen.cam.NcmWedmBuilder
Returns the cutcom_off
License requirements: cam_base ("CAM BASE")
.
cutcomOffStatus - Variable in class nxopen.uf.UFPath.Cutcom
cutcomOn() - Method in interface nxopen.cam.NcmWedmBuilder
Returns the cutcom_on
License requirements: cam_base ("CAM BASE")
.
cutcomOnStatus - Variable in class nxopen.uf.UFPath.Cutcom
cutcomOutputContactPoint() - Method in interface nxopen.cam.NcmHoleMachining
Returns the cutter compensation output contact point status
License requirements: None.
cutcomOutputContactPoint() - Method in interface nxopen.cam.NcmPlanarBuilder
Returns the cutter compensation output contact point status
License requirements: None.
cutcomOutputPlane() - Method in interface nxopen.cam.NcmHoleMachining
Returns the cutter compensation output plane status
License requirements: None.
cutcomOutputPlane() - Method in interface nxopen.cam.NcmPlanarBuilder
Returns the cutter compensation output plane status
License requirements: None.
cutcomReg() - Method in interface nxopen.cam.NcmWedmBuilder
Returns the cutcom_reg
License requirements: cam_base ("CAM BASE")
.
cutcomreg - Variable in class nxopen.cam.TrackingBuilder.Data
the cutcom register
cutcomReg() - Method in interface nxopen.cam.WireTool
Returns the Cutcom Register
License requirements: None.
cutcomRegBuilder() - Method in interface nxopen.cam.NcmWedmBuilder
Returns the cutcom_reg builder
License requirements: cam_base ("CAM BASE")
.
cutcomRegister() - Method in interface nxopen.cam.ToolChangeCiBuilder
Returns the Tool cutcom register builder
License requirements: None.
cutcomRegister() - Method in interface nxopen.sim.KinematicComponentBuilder
Returns the cutcom register
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
cutcomRegister - Variable in class nxopen.uf.UFPath.TrackingPointChange
cutcomRegisterFlag() - Method in interface nxopen.cam.NcmWedmBuilder
Returns the cutcom output register flag
License requirements: cam_base ("CAM BASE")
.
cutcomRegisterToggle() - Method in interface nxopen.cam.ToolChangeCiBuilder
Returns the Tool cutcom register toggle
License requirements: None.
cutcomRegisterType() - Method in interface nxopen.sim.KinematicComponentBuilder
Returns the cutcom register type
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
cutcomStatus - Variable in class nxopen.uf.UFCutter.TrackingPointData
cutcomTrackingPointType() - Method in interface nxopen.cam.NcmPlanarBuilder
Returns the cutter compensation tracking point selection
License requirements: None.
cutcomType() - Method in interface nxopen.cam.NcmHoleMachining
Returns the cutter compensation type
License requirements: None.
cutcomType() - Method in interface nxopen.cam.NcmPlanarBuilder
Returns the cutter compensation type
License requirements: None.
cutcomused - Variable in class nxopen.cam.MillingTrackpointBuilder.Data
the cutcom toggle
cutcomused - Variable in class nxopen.cam.MillingTrackpointBuilder.TrackPointData
the cutcom toggle
cutConnection() - Method in interface nxopen.cam.TurnCutParameters
Returns the cut connection
License requirements: None.
CutCopyPasteBuilder - Interface in nxopen.drafting
Represents a paste in Drafting.
CutCopyPasteBuilder.TypeOperation - Class in nxopen.drafting
Specifies the copy cut operation type.
CutCopyPasteBuilder.TypePaste - Class in nxopen.drafting
Specifies the paste type.
cutCopyPasteLeader() - Method in interface nxopen.drafting.CutCopyPasteBuilder
Returns the leader builder.
CutCopyPasteLeaderBuilder - Interface in nxopen.drafting
Represents a Drafting Paste, especially when reassociating a leader on paste.
cutCount() - Method in interface nxopen.features.shipdesign.EdgeCutBuilder
Returns the number of cuts
License requirements: None.
cutCurveSets - Variable in class nxopen.uf.UFModl.SmpunchData
cutDepth() - Method in interface nxopen.cam.ThreadCutParameters
Returns the thread cut depth
License requirements: None.
CutDepthChecker - Interface in nxopen.cam
Represents a cut depth checker object
This has not creator
.
cutDir - Variable in class nxopen.uf.UFDraw.AskPictorialSxlineData
cutDirection() - Method in interface nxopen.cam.Blade
Returns the Cut Direction
License requirements: None.
cutDirection() - Method in interface nxopen.cam.CylinderMillingCutParameters
cutDirection() - Method in interface nxopen.cam.LaserCircleCutout
Returns the Cut Direction
License requirements: None.
cutDirection() - Method in interface nxopen.cam.LaserHexagonCutout
Returns the Cut Direction
License requirements: None.
cutDirection() - Method in interface nxopen.cam.LaserProfileMove
Returns the Cut Direction
License requirements: None.
cutDirection() - Method in interface nxopen.cam.LaserRectangleCutout
Returns the Cut Direction
License requirements: None.
cutDirection() - Method in interface nxopen.cam.LaserSlotCutout
Returns the Cut Direction
License requirements: None.
cutDirection() - Method in interface nxopen.cam.MillCutParameters
Returns the cut direction
License requirements: None.
cutDirection() - Method in interface nxopen.cam.SurfaceRegions
Returns the cut direction
License requirements: None.
cutDirection() - Method in interface nxopen.cam.ThreadMillingCutParameters
cutDirection() - Method in interface nxopen.cam.WedmBasedGeomBuilder
Returns the Cut Direction
License requirements: cam_base ("CAM BASE")
.
cutDirection() - Method in interface nxopen.cam.WedmCutParameters
Returns the Cut Direction
License requirements: cam_base ("CAM BASE")
.
cutDirection() - Method in interface nxopen.drawings.SectionLineBuilder
cutDirectionType() - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder
Returns the function for cut direction type
License requirements: None.
cutDisplayInstanceObjects(Annotation[], View[], View) - Method in interface nxopen.annotations.PmiManager
Cuts the input PMI Display Instance objects in the part.
CutDwell - Interface in nxopen.cam
Represents a
CutDwell
Created in NX6.0.0
Returns the Cut Dwell
License requirements: None.
CutDwell.Types - Class in nxopen.cam
the rough cut dwell mode options .
CutFace - Interface in nxopen.features
Represents a cut face feature
To create or edit an instance of this class, use
CutFaceBuilder
Created in NX6.0.0
Represents a builder for a cut face feature.
cutFaceColor() - Method in interface nxopen.drawings.ViewStyleShadingBuilder
Returns the cut face color on the SHADING tab of the View Style Dialog
License requirements: None.
cutFaceDrops() - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder
Returns the option to consider cut ply elements as drop-offs
License requirements: None.
cutFaceSelect() - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder
Returns the cutting face(s) selection
License requirements: None.
cutFillets() - Method in interface nxopen.cam.TurnCutParameters
Returns the fillets mode
License requirements: None.
cutGasPressure() - Method in interface nxopen.cam.FeedsBuilder
Returns the Cut Gas Pressure
License requirements: cam_base ("CAM BASE")
.
cutGasPressure() - Method in interface nxopen.cam.LaserMethod
Returns the Cut Gas Pressure
License requirements: None.
cutGasType() - Method in interface nxopen.cam.FeedsBuilder
Returns the Cut Gas Type
License requirements: cam_base ("CAM BASE")
.
cutGasType() - Method in interface nxopen.cam.LaserMethod
Returns the Cut Gas Type
License requirements: None.
cutLaserDelay() - Method in interface nxopen.cam.FeedsBuilder
Returns the Laser Cut Delay
License requirements: cam_base ("CAM BASE")
.
cutLaserDelay() - Method in interface nxopen.cam.LaserMethod
Returns the Cut Laser Delay
License requirements: None.
cutLaserFrequency() - Method in interface nxopen.cam.FeedsBuilder
Returns the Laser Cut Frequency
License requirements: cam_base ("CAM BASE")
.
cutLaserFrequency() - Method in interface nxopen.cam.LaserMethod
Returns the Cut Laser Frequency
License requirements: None.
cutLaserPower() - Method in interface nxopen.cam.FeedsBuilder
Returns the Laser Cut Power
License requirements: cam_base ("CAM BASE")
.
cutLaserPower() - Method in interface nxopen.cam.LaserMethod
Returns the Cut Laser Power
License requirements: None.
cutLength() - Method in interface nxopen.routing.electrical.ElectricalStockDevice
Returns the cut length.
cutLevel() - Method in interface nxopen.cam.CavityMillingBuilder
Returns the cut level builder
License requirements: None.
CutLevel - Interface in nxopen.cam
Represents a cut level object for cavity mill and zlevel mill.
cutLevel() - Method in interface nxopen.cam.PlanarMillingBuilder
Returns the Planar Mill Cut Level builder
License requirements: None.
cutLevel() - Method in interface nxopen.cam.PlungeMillingBuilder
Returns the cut level builder
License requirements: None.
cutLevel() - Method in interface nxopen.cam.VazlMillingBuilder
Returns the cut level builder
License requirements: None.
cutLevel() - Method in interface nxopen.cam.ZLevelMillingBuilder
Returns the cut level builder
License requirements: None.
CutLevel.MeasureTypes - Class in nxopen.cam
measure from types .
CutLevel.RangeTypes - Class in nxopen.cam
range types .
CutLevel.Types - Class in nxopen.cam
cut level types .
CutLevelPlanar - Interface in nxopen.cam
Represents a cut level object for planar mill.
CutLevelPlanar.Types - Class in nxopen.cam
cut level types .
cutLevels() - Method in interface nxopen.cam.SurfaceContourBuilder
Returns the cut levels builder
License requirements: None.
CutLevels() - Constructor for class nxopen.uf.UFCutLevels.CutLevels
CutLevels(int, UFCutLevels.Single[], int, UFCutLevels.Single[]) - Constructor for class nxopen.uf.UFCutLevels.CutLevels
cutLevels - Variable in class nxopen.uf.UFCutLevels.CutLevels
cutLevels() - Method in interface nxopen.UFSession
cutLevelType() - Method in interface nxopen.cam.AreaMillingSteepContainment
Returns the cut level type
License requirements: None.
cutLevelType() - Method in interface nxopen.cam.CutLevel
Returns the cut level type
License requirements: None.
cutLevelType() - Method in interface nxopen.cam.CutLevelPlanar
Returns the cut level type
License requirements: None.
cutLevelType() - Method in interface nxopen.cam.FlowCutSteepContainment
Returns the cut level type
License requirements: None.
cutLineAngle() - Method in interface nxopen.features.WrapBuilder
Returns the angle, measured from the point of tangency of the plane and the faces,
at which curves will be split during the wrapping operation.
cutLineAngle - Variable in class nxopen.uf.UFCurve.WrapData
cutLocation() - Method in interface nxopen.drawings.HalfSectionLineBuilder
cutLocation3D() - Method in interface nxopen.drawings.OrientedSectionLineBuilder
cutObject() - Method in interface nxopen.display.DynamicSectionCut
Returns the object from which this section-cut is generated.
cutObject - Variable in class nxopen.uf.UFDraw.HalfSxsegs
cutObjects(CAMSetup.View, CAMObject[]) - Method in interface nxopen.cam.CAMSetup
Cut objects
License requirements: cam_base ("CAM BASE")
.
cutObjects(CAMSetup.View, CAMObject[]) - Method in interface nxopen.cam.InspectionSetup
Cut objects
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
cutoffAngle() - Method in interface nxopen.features.sheetmetal.MigratedPanelBuilder
Returns
the cutoff angle expression.
cutoffDistance() - Method in interface nxopen.cam.WedmBasedGeomBuilder
Returns the Cutoff Distance
License requirements: cam_base ("CAM BASE")
.
cutoffDistanceBuilder() - Method in interface nxopen.cam.WedmGeomBuilder
Returns the cutoff_distance builder
License requirements: cam_base ("CAM BASE")
.
cutoffDistanceBuilder() - Method in interface nxopen.cam.WedmOperationBuilder
Returns the cutoff_distance builder
License requirements: cam_base ("CAM BASE")
.
cutoffFlag() - Method in interface nxopen.cam.WedmBasedGeomBuilder
Returns the Cutoff Flag
License requirements: cam_base ("CAM BASE")
.
cutoffFlag() - Method in interface nxopen.cam.WedmGeomBuilder
Returns the Cutoff Flag
License requirements: cam_base ("CAM BASE")
.
cutoffFlag() - Method in interface nxopen.cam.WedmOperationBuilder
Returns the Cutoff Flag
License requirements: cam_base ("CAM BASE")
.
cutoffFlagBuilder() - Method in interface nxopen.cam.WedmGeomBuilder
Returns the cutoff_flag builder
License requirements: cam_base ("CAM BASE")
.
cutoffFlagBuilder() - Method in interface nxopen.cam.WedmOperationBuilder
Returns the cutoff_flag builder
License requirements: cam_base ("CAM BASE")
.
cutoffStock() - Method in interface nxopen.cam.WedmBasedGeomBuilder
Returns the Cutoff Stock
License requirements: cam_base ("CAM BASE")
.
cutoffStockBuilder() - Method in interface nxopen.cam.WedmGeomBuilder
Returns the cutoff_stock builder
License requirements: cam_base ("CAM BASE")
.
cutoffStockBuilder() - Method in interface nxopen.cam.WedmOperationBuilder
Returns the cutoff_stock builder
License requirements: cam_base ("CAM BASE")
.
cutoffText() - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
Returns the cutoff text
License requirements: None.
cutoffType() - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
Returns the cutoff enum
License requirements: None.
cutOnlyAlongFloorAndWall() - Method in interface nxopen.cam.DmCmMultiplePassesCiBuilder
Returns the Cut Only Along Floor and Wall
License requirements: cam_base ("CAM BASE")
.
cutOrder() - Method in interface nxopen.cam.MillCutParameters
Returns the cut order
License requirements: None.
cutOrder() - Method in interface nxopen.cam.WedmCutOrderBuilder
Returns the cut order
License requirements: cam_base ("CAM BASE")
.
cutOrientationAngle() - Method in interface nxopen.features.shipdesign.EdgeCutBuilder
Returns the cut orientation angle.
CUTOUT - Static variable in class nxopen.features.shipdesign.UpdateShipLibraryBuilder.ShipLibOptionType
Cutout2 - Interface in nxopen.features.shipdesign
Represents a cutout2 feature
To create or edit an instance of this class, use
Cutout2Builder
Created in NX8.0.0
available methods used to place a cutout object
CUTOUT_ANGLE - Static variable in class nxopen.features.shipdesign.ExamineSteelFeatureBuilderCheck
Check profile cutout angle offset
CUTOUT_CLEARANCE - Static variable in class nxopen.features.shipdesign.ExamineSteelFeatureBuilderCheck
Check cutout top and bottom clearance
CUTOUT_TO_HOLE - Static variable in class nxopen.features.shipdesign.ExamineSteelFeatureBuilderCheck
Check cutout to hole
CUTOUT_TO_SEAM - Static variable in class nxopen.features.shipdesign.ExamineSteelFeatureBuilderCheck
In basic design,check cutout to seam,In detail design,check cutout to edge
cutoutData() - Method in interface nxopen.features.shipdesign.ProfileCutoutBuilder
Returns the sketch controlling the shape and parameters of the profile cutout.
cutoutDefinition() - Method in interface nxopen.cam.LaserCircleCutout
Returns the Cutout Definition
License requirements: None.
cutoutDefinition() - Method in interface nxopen.cam.LaserHexagonCutout
Returns the Cutout Definition
License requirements: None.
cutoutDefinition() - Method in interface nxopen.cam.LaserRectangleCutout
Returns the Cutout Definition
License requirements: None.
cutoutDefinition() - Method in interface nxopen.cam.LaserSlotCutout
Returns the Cutout Definition
License requirements: None.
cutoutDefType() - Method in interface nxopen.cam.LaserCutoutDefinition
Returns the Cutout Definition Type
License requirements: None.
cutoutDepth() - Method in interface nxopen.features.sheetmetal.DrawnCutoutBuilder
Returns the depth of the Drawn Cutout
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
cutoutLength() - Method in interface nxopen.features.PatchOpeningsBuilder
Returns the cutout length, used only when type is Features.PatchOpeningsBuilder.Types#JOGGLE
License requirements: None.
cutoutPart() - Method in interface nxopen.features.shipdesign.PenetrationAssociationBuilder
Returns the cutout part
License requirements: None.
cutoutProfile() - Method in interface nxopen.features.sheetmetal.AeroLighteningCutoutBuilder
Returns the cutout profile
License requirements: None.
cutoutRadius() - Method in interface nxopen.features.PatchOpeningsBuilder
Returns the cutout radius, used only when type is Features.PatchOpeningsBuilder.Types#JOGGLE
License requirements: None.
cutoutSection() - Method in interface nxopen.cam.LaserCutoutDefinition
Returns the Cutout Section
License requirements: None.
cutParameters() - Method in interface nxopen.cam.ChamferMillingBuilder
CutParameters - Interface in nxopen.cam
cutParameters() - Method in interface nxopen.cam.CylinderMillingBuilder
cutParameters() - Method in interface nxopen.cam.HoleDrillingBuilder
cutParameters() - Method in interface nxopen.cam.HoleMakingBuilder
Returns the cut parameter object
License requirements: None.
cutParameters() - Method in interface nxopen.cam.MethodBuilder
Returns the cut parameter object
License requirements: cam_base ("CAM BASE")
.
cutParameters() - Method in interface nxopen.cam.MillOperationBuilder
Returns the cut parameter object
License requirements: cam_base ("CAM BASE")
.
cutParameters() - Method in interface nxopen.cam.RoughFinishTurningBuilder
Returns the cut parameter object
License requirements: None.
cutParameters() - Method in interface nxopen.cam.ThreadMillingBuilder
cutParameters() - Method in interface nxopen.cam.ThreadTurningBuilder
Returns the cut parameter object
License requirements: None.
cutParameters() - Method in interface nxopen.cam.WedmGeomBuilder
Returns the cut parameter object
License requirements: None.
cutParameters() - Method in interface nxopen.cam.WedmOperationBuilder
Returns the cut parameter object
License requirements: None.
CutParametersActionWhenGougingTypes - Class in nxopen.cam
Available types for actions when gouging
CutParametersAdjacentBladesTypes - Class in nxopen.cam
Available types for Adjacent Blades Option .
CutParametersCleanupControlTypes - Class in nxopen.cam
Available types for cleanup control .
CutParametersCornerFindingTypes - Class in nxopen.cam
Available types for Finding Corner Options .
CutParametersCutConnectionTypes - Class in nxopen.cam
Available types for cut connection .
CutParametersCutOrderTypes - Class in nxopen.cam
Available types for cut order
CutParametersExtendAtStartMode - Class in nxopen.cam
Available modes for Turning Cutting Corners Extend At Start .
CutParametersExtendFloorTypes - Class in nxopen.cam
extend floor to options .
CutParametersFilletsTypes - Class in nxopen.cam
Available types for fillets .
CutParametersFinishPassesTypes - Class in nxopen.cam
Available types for finish passes .
CutParametersIpwTypes - Class in nxopen.cam
Available types for IPW
CutParametersPatternDirectionTypes - Class in nxopen.cam
Available types for pattern direction
CutParametersPlungeDirectionTypes - Class in nxopen.cam
Available types for plunge direction
CutParametersProfileCutRegionsTypes - Class in nxopen.cam
Available types for profile .
CutParametersRegionSequencingTypes - Class in nxopen.cam
Available types for region resequencing method
CutParametersSimplifyShapesTypes - Class in nxopen.cam
Available types for simplify shapes method
CutParametersToolRunOffTypes - Class in nxopen.cam
Available types for Tool Run Off Options .
CutParametersTraverseOpenPassesTypes - Class in nxopen.cam
Available types for traverse open passes
CutParametersTrimControlTypes - Class in nxopen.cam
Available types for trim control method
cutPattern() - Method in interface nxopen.cam.AreaMillingContainment
Returns the cut pattern builder
License requirements: None.
cutPattern() - Method in interface nxopen.cam.Blade
Returns the cut pattern builder
License requirements: None.
cutPattern() - Method in interface nxopen.cam.CutPatternBuilder
Returns the cut pattern option
License requirements: None.
cutPattern() - Method in interface nxopen.cam.CylinderMillingBuilder
Returns the cut pattern
License requirements: None.
cutPattern() - Method in interface nxopen.cam.FlowCutSteepContainment
Returns the cut pattern builder
License requirements: None.
cutPattern() - Method in interface nxopen.cam.PlanarOperationBuilder
Returns the cut pattern builder
License requirements: None.
cutPattern() - Method in interface nxopen.cam.WedmOperationBuilder
Returns the cut pattern
License requirements: None.
CutPatternBuilder - Interface in nxopen.cam
Represents a Cut Pattern Builder .
cutPatternBuilder() - Method in interface nxopen.cam.DmAmBuilder
Returns the cut pattern builder
License requirements: None.
cutPatternBuilder() - Method in interface nxopen.cam.DmBndBuilder
Returns the cut pattern builder
License requirements: None.
cutPatternBuilder() - Method in interface nxopen.cam.DmRadBuilder
Returns the cut pattern builder
License requirements: None.
cutPatternBuilder() - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder
Returns the cut pattern builder
License requirements: None.
cutPatternBuilder() - Method in interface nxopen.cam.DmSurfBuilder
Returns the cut pattern builder
License requirements: None.
cutPatternBuilder() - Method in interface nxopen.cam.DPMItpBuilder
Returns the cut pattern builder
License requirements: None.
CutPatternBuilder.Types - Class in nxopen.cam
cut pattern options .
cutPatternCenter() - Method in interface nxopen.cam.DmBndBuilder
Returns the Pattern Center
License requirements: None.
cutPlaneLeg - Variable in class nxopen.uf.UFDraw.AskRevolvedSxlineData
cutRegionExists - Variable in class nxopen.uf.UFTurn.AskCutRegionOfIndexData
cutRegions() - Method in interface nxopen.cam.RoughFinishTurningBuilder
Returns the Cut regions type
License requirements: None.
CutRegionsBuilder - Interface in nxopen.cam
Represents a Cut Regions Builder .
CutRegionsBuilder.CutRegionsContainmentTypes - Class in nxopen.cam
Available types for containment import options
CutRegionsBuilder.CutRegionsProgramTypes - Class in nxopen.cam
Available types for program import options
CutRegionsBuilder.CutRegionsStatusTypes - Class in nxopen.cam
Available types for status import options
cutRegionsContainment() - Method in interface nxopen.cam.CutRegionsBuilder
Returns the containment type import option value
License requirements: None.
cutRegionSelectionMode() - Method in interface nxopen.cam.TurnFeatureGeomBuilder
Returns the cut region selection mode
License requirements: cam_base ("CAM BASE")
.
cutRegionSelectionPoint() - Method in interface nxopen.cam.TurnFeatureGeomBuilder
Returns the cut region selection point
License requirements: cam_base ("CAM BASE")
.
cutRegionsLocation - Variable in class nxopen.uf.UFTurn.AskCutRegionsExistData
cutRegionsProgram() - Method in interface nxopen.cam.CutRegionsBuilder
Returns the program import option value
License requirements: None.
cutRegionsStatus() - Method in interface nxopen.cam.CutRegionsBuilder
Returns the status type import option value
License requirements: None.
cuts() - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder
Returns the option use cutting faces
License requirements: None.
cutSection(Curve, boolean) - Method in interface nxopen.die.AddendumSectionBuilder
Cuts section in order to be pasted at another location.
cutSelection() - Method in interface nxopen.cae.LaminateDrapingDataBuilder
Returns the selected cut curves.
cutSequence() - Method in interface nxopen.cam.TurnGrooveCornerControl
Returns the Groove Corner Control cut sequence
License requirements: None.
CutSides - Interface in nxopen.cam
Represents a Cut Sides Builder .
CutSides.SideType - Class in nxopen.cam
Available types for sides to cut
cutStart() - Method in interface nxopen.cam.BladeRough
Returns the cut start location builder
License requirements: None.
cutStart() - Method in interface nxopen.cam.HubFinish
Returns the cut start location builder
License requirements: None.
cutStepFirstCut() - Method in interface nxopen.cam.DPMItpBuilder
Returns the First Cut
License requirements: None.
cutStepSecondCut() - Method in interface nxopen.cam.DPMItpBuilder
Returns the Second Cut
License requirements: None.
cutStepThirdCut() - Method in interface nxopen.cam.DPMItpBuilder
Returns the Third Cut
License requirements: None.
cutStock - Variable in class nxopen.uf.UFCamgeom.AppData
CutStrategy - Interface in nxopen.cam
Represents cut strategy .
cutStrategy() - Method in interface nxopen.cam.RoughTurningBuilder
Returns the Cut Strategy
License requirements: None.
CutStrategy.Types - Class in nxopen.cam
The cut strategy options .
cutter() - Method in interface nxopen.UFSession
CUTTER_CONVERSION_PROBLEM - Static variable in class nxopen.cam.CAMObject.Attr
cutterClearance() - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder
Returns the cutter clearance angles builder
License requirements: None.
cutterExportBuilder() - Method in interface nxopen.cam.ToolBuilder
Returns the cutter export builder
License requirements: None.
cutterSubtype() - Method in interface nxopen.cam.MillToolBuilder
Returns the cutter subtypes
License requirements: None.
cutThruModel - Variable in class nxopen.uf.UFDraw.BreakoutData
CUTTING - Static variable in class nxopen.cam.DrillTapToolBuilder.ToolThreadFormMethodTypes
cutting
CUTTING - Static variable in class nxopen.cam.NcmSmoothingBuilder.SmoothToleranceSources
use cutting tolerance type
CUTTING_MODE_CUT - Static variable in class nxopen.uf.UFSim.CuttingMode
CUTTING_MODE_NONE - Static variable in class nxopen.uf.UFSim.CuttingMode
CUTTING_MODE_RAPID - Static variable in class nxopen.uf.UFSim.CuttingMode
CUTTING_PLANE - Static variable in class nxopen.cae.Post.Target
CUTTING_PLANE_SYMBOL - Static variable in class nxopen.annotations.PmiFilterByType.Type
Indicates a PMI Cutting Symbol Type
cuttingDirection() - Method in interface nxopen.cam.FeatureMillingCutParameters
Returns the cut direction
License requirements: None.
cuttingParameters() - Method in interface nxopen.cam.HoleMachiningBuilder
Returns the Cut Parameters
License requirements: None.
cuttingPerimeter() - Method in interface nxopen.tooling.ForceCalculationBuilder
Returns the cutting perimeter length for EDM of the process.
CuttingPlaneSymbol - Interface in nxopen.annotations
Represents a Cutting Plane Symbol
Created with LightweightSection
.
cuttingPlaneSymbol() - Method in interface nxopen.annotations.LightweightSectionBuilder
Returns the cutting plane symbol
License requirements: None.
cuttingPlaneSymbolArrowLength() - Method in interface nxopen.annotations.PmiPreferences
Returns the cutting plane symbol arrow length
License requirements: None.
CuttingPlaneSymbolBuilder - Interface in nxopen.annotations
CuttingPlaneSymbolBuilder.TextPlaneRelativeArrow - Class in nxopen.annotations
Represents position of the text relative to the arrow option
CuttingPlaneSymbolBuilder.ViewNameFormatOption - Class in nxopen.annotations
Represents whether the view name is derived from the PMI cutting plane symbol text.
cuttingPlaneSymbolColor() - Method in interface nxopen.annotations.PmiPreferences
Returns the cutting plane symbol color
License requirements: None.
cuttingPlaneSymbolSectionPrefix() - Method in interface nxopen.annotations.PmiPreferences
Returns the section prefix for cutting plane symbol
License requirements: None.
cuttingPlaneSymbolShadedPlane() - Method in interface nxopen.annotations.PmiPreferences
Returns the cutting plane symbol shaded plane option
License requirements: None.
cuttingPlaneSymbolStartingLetter() - Method in interface nxopen.annotations.PmiPreferences
Returns the starting letter for cutting plane symbol
License requirements: None.
cuttingPlaneSymbolText() - Method in interface nxopen.annotations.CuttingPlaneSymbolBuilder
Returns the Cutting Plane Symbol text
License requirements: None.
cuttingPlaneSymbolTextPlaneRelativeToArrow() - Method in interface nxopen.annotations.PmiPreferences
Returns the orientation of the cutting plane symbol text plane with respect to arrow plane
License requirements: None.
cuttingSideFaces() - Method in interface nxopen.features.shipdesign.CuttingSideFacesBuilder
Returns the faces to identify, or attribute, as cutting side.
cuttingSideFaces() - Method in interface nxopen.features.shipdesign.MarkingLineBuilder
Returns the cutting side face
License requirements: None.
CuttingSideFacesBuilder - Interface in nxopen.features.shipdesign
Used to create a
CuttingSideFacesBuilder which
is used to attribute the cutting side, and opposing cutting side, faces on the plate bodies.
Type of operation to perform on the plate.
cutToBoundary() - Method in interface nxopen.tooling.EnlargeSurfaceBuilder
Returns the value of option, which specifies whether to cut the target to boundary objects or not.
cutType() - Method in interface nxopen.cam.DPMItpBuilder
Returns the cut type
License requirements: cam_base ("CAM BASE")
.
cutType() - Method in interface nxopen.cam.TurnRoughFinishTestCut
Returns the test cut type
License requirements: None.
cutType() - Method in interface nxopen.features.sheetmetal.NormalCutoutBuilder
Returns the cut type for the normal cutout.
cutType() - Method in interface nxopen.features.SnipSurfaceBuilder
Returns the cutting type
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
CutView - Interface in nxopen
Represents a Cut View
Cut Views may only be created via a Master Cut Builder.
cutView() - Method in interface nxopen.features.MasterCutBuilder
Returns the cut view
License requirements: solid_modeling ("SOLIDS MODELING")
.
CutViewCollection - Interface in nxopen
Represents a collection of
CutView objects.
Returns the CutViewCollection instance belonging to this part .
cutViewUpdateDelayed() - Method in interface nxopen.preferences.PartModeling
Returns the state of the cut view delay update flag.
cutVolume() - Method in interface nxopen.cam.CutDepthChecker
Returns the calculated cut volume
License requirements: None.
CutVolume - Interface in nxopen.cam
The classs represent the sub builder for creating cut volume feature items
To create a new instance of this class, use
CutVolumeGeom.createCutVolume()
Created in NX8.0.0
The classs represent the builder for creating cut volume features .
cutVolumeGeom() - Method in interface nxopen.cam.GeometryCiBuilder
Returns the cut volume geometry
License requirements: cam_base ("CAM BASE")
.
CutVolumeList - Interface in nxopen.cam
Represents a list of objects.
cutVolumes() - Method in interface nxopen.cam.CutVolumeGeom
Returns the features
License requirements: None.
cutWallsOnly() - Method in interface nxopen.cam.MillCutParameters
Returns the Cut Walls Only toggle
License requirements: None.
CYAN_CYAN_AZURE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
CYAN_CYAN_TEAL_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
CYAN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
Cycle - Interface in nxopen.cam
Represets a User Defined Event .
CYCLE - Static variable in class nxopen.preferences.RoutingPath.ChainMethod
Return all chains
cycle() - Method in interface nxopen.SketchIntersectionPointBuilder
Method to get the next alternate solution
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
Cycle.DwellType - Class in nxopen.cam
Available types for dwell
Cycle.MotionOutputTypes - Class in nxopen.cam
Available types for motion output
cycleAll(Tag, Tag) - Method in interface nxopen.uf.UFObj
cycleByLayer(int, Tag) - Method in interface nxopen.uf.UFLayer
cycleByName(String, Tag) - Method in interface nxopen.uf.UFObj
cycleByNameAndType(Tag, String, int, boolean, Tag) - Method in interface nxopen.uf.UFObj
cycleByNameAndTypeExtended(Tag, String, int, boolean, Tag) - Method in interface nxopen.uf.UFObj
cycleEntsInPartOcc(Tag, Tag) - Method in interface nxopen.uf.UFAssem
cycleErrors(int) - Method in interface nxopen.uf.UFPatt
CycleErrorsData() - Constructor for class nxopen.uf.UFPatt.CycleErrorsData
cycleEvent() - Method in interface nxopen.cam.ParamBuilder
Returns the cycle event
License requirements: cam_base ("CAM BASE")
.
cycleFacets(Tag, int) - Method in interface nxopen.uf.UFFacet
cycleFacetsInFace(Tag, int, int) - Method in interface nxopen.uf.UFFacet
cycleFlag - Variable in class nxopen.uf.UFDrf.AskAnnData
cycleInstOfPart(Tag, Tag) - Method in interface nxopen.uf.UFAssem
cycleObjects(Tag, UFView.CycleObjects, Tag) - Method in interface nxopen.uf.UFView
cycleObjectsInView(NXObject, int, boolean, NXObject) - Method in interface nxopen.tooling.AutoDimensionBuilder
The method to cycle objects in view
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
cycleObjectsInView(NXObject, int, boolean, NXObject) - Method in interface nxopen.tooling.HoleManufacturingNoteBuilder
The method to cycle objects in view
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
cycleObjsInComp(Tag) - Method in interface nxopen.uf.UFAssem
cycleObjsInPart(Tag, int, Tag) - Method in interface nxopen.uf.UFObj
cyclePaths() - Method in interface nxopen.routing.ManualRouteBuilder
Cycle paths through filter paths array to enable user select path for routing.
cycleRoutingPorts() - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder
Cycles through the ports on the selected routing component.
CYCLES - Static variable in class nxopen.cae.XyFunctionMeasure
Cycles unit
CYCLES_DUTY - Static variable in class nxopen.cae.XyFunctionUnit
Cycles unit: duty cycles
CYCLES_TO_FAILURE - Static variable in class nxopen.uf.UFSf.DursolDesignLifeCriterion
cyclesToFailure() - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
Returns the cycles to failure.
cycleTable() - Method in interface nxopen.cam.ParamBuilder
Returns the cycle
License requirements: cam_base ("CAM BASE")
.
cycleTrackingPoint() - Method in interface nxopen.cam.Cycle
Returns the tracking point
License requirements: None.
cycleType() - Method in interface nxopen.cam.Cycle
Returns the cycle type
License requirements: None.
cycleType() - Method in interface nxopen.cam.ProbeInspectBorebossMoveBuilder
Returns the cycle type
License requirements: None.
cycleTypedObjsInPart(Tag, int, Tag) - Method in interface nxopen.uf.UFObj
CYCLIC - Static variable in class nxopen.mechatronics.CamProfileBuilder.ProfileCyclicType
In Cyclic Cam Profiles the points at the beginning
and the end of the Master Axis range need to be identical
with respect to Slave Axis value, slope and curve.
CYCLIC - Static variable in class nxopen.mechatronics.MotionProfileBuilder.ProfileCyclicType
Cyclic
CYCLIC_SYMMETRY - Static variable in class nxopen.cae.optimization.TBSTopologyLinkCondition.SymmetryOption
Cyclic symmetry definition
cyclicStressStrainModel() - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
Returns the cyclic stress strain model.
cyclicType() - Method in interface nxopen.mechatronics.CamProfileBuilder
Returns the cyclic type of a cam profile
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
cyclicType() - Method in interface nxopen.mechatronics.MotionProfileBuilder
Returns the cyclic type of a cam profile
License requirements: None.
cylFace - Variable in class nxopen.uf.UFModl.SymbThreadData
CYLINDER - Static variable in class nxopen.cae.Mesh2dBuilder.GeometryType
Cylinder
CYLINDER - Static variable in class nxopen.cam.CamInspectionOperationFeaturetypes
Cylinder
CYLINDER - Static variable in class nxopen.cam.InspectionMethodBuilder.MethodTypes
Cylinder
CYLINDER - Static variable in class nxopen.cam.InspectionMoveBuilder.ProbeTipTypes
Cylinder tip
CYLINDER - Static variable in class nxopen.cam.InspectionProbeTrackingBuilder.TipTypes
Cylinder
CYLINDER - Static variable in class nxopen.cam.InspectionSensorBuilder.SensorTipTypes
Cylinder
CYLINDER - Static variable in class nxopen.cam.NcmClearanceBuilder.ClearanceTypes
clearance cylinder
cylinder() - Method in interface nxopen.cam.ProbeCalibrateStylusMoveBuilder
Returns the cylinder to probe
License requirements: None.
CYLINDER - Static variable in class nxopen.cam.ProbeCalibrateStylusMoveBuilder.Geometry
Cylinder
cylinder() - Method in interface nxopen.cam.ProbeInspectBorebossMoveBuilder
Returns the cylinder to inspect
License requirements: None.
CYLINDER - Static variable in class nxopen.cam.ProbeInspectBorebossMoveBuilder.Geometry
Cylinder
Cylinder - Interface in nxopen.features
Represents a cylinder feature
To create or edit an instance of this class, use
CylinderBuilder
Created in NX5.0.0
Generalized cylindrical developable surface.
CYLINDER - Static variable in class nxopen.mechatronics.CollisionBodyBuilder.CollisionShapeTypes
Cylinder
CYLINDER - Static variable in class nxopen.positioning.ConstraintReference.GeometryType
Cylinder
CYLINDER - Static variable in class nxopen.tooling.ElectrodeBlankBuilder.BlankShape
the shape of the blank is cylinder
CYLINDER - Static variable in class nxopen.tooling.SubInsertBuilder.Shape
The shape is a cylinder
CYLINDER - Static variable in class nxopen.weld.DatumCommonBuilder.SolidTypes
Datum solid will be a cylinder
CYLINDER_DENSITY - Static variable in class nxopen.cae.MeshControlBuilder.Types
CYLINDER_GEOM - Static variable in class nxopen.uf.UFBrep.GeomType
CYLINDER_JOINT - Static variable in class nxopen.uf.UFMotion.JointType
cylinderAxialElementSize() - Method in interface nxopen.cae.MeshControlBuilder
Returns the cylinder axial element size
License requirements: None.
cylinderAxialElementSizeOption() - Method in interface nxopen.cae.MeshControlBuilder
Returns the cylinder axial element size option
License requirements: None.
cylinderAxialNumElements() - Method in interface nxopen.cae.MeshControlBuilder
Returns the cylinder axial num elements
License requirements: None.
CylinderBuilder - Interface in nxopen.features
CylinderBuilder.Types - Class in nxopen.features
the cylinder types
cylinderCircleFitMode() - Method in interface nxopen.cam.InspectionMethodBuilder
Returns the analysis cylinder/circle fitting mode
License requirements: None.
cylinderCircularNumElements() - Method in interface nxopen.cae.MeshControlBuilder
Returns the cylinder circular num elements
License requirements: None.
cylinderCircularNumPerQuarter() - Method in interface nxopen.cae.MeshControlBuilder
Returns the cylinder circular num by degrees
License requirements: None.
cylinderCircularSizeOption() - Method in interface nxopen.cae.MeshControlBuilder
Returns the cylinder circular size option
License requirements: None.
cylinderDensitySize() - Method in interface nxopen.cae.MeshControlDisplayOptionsBuilder
Returns the cylinder density size
License requirements: None.
CylinderFaceMethod - Interface in nxopen.cae
Represents the output from the cylinder face smart selector method
To obtain an instance of this class use CAE::SmartSelectionManager
.
cylinderFitting() - Method in interface nxopen.cam.InspectionAnalyzeBuilder
Returns the analysis cylinder/circle fitting type
License requirements: None.
cylinderHeight() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
Returns the expression containing the value for the cylinder height.
cylinderMaxAngle() - Method in interface nxopen.cae.MeshControlBuilder
Returns the cylinder max angle
License requirements: None.
cylinderMaxRadius() - Method in interface nxopen.cae.MeshControlBuilder
Returns the cylinder max radius
License requirements: None.
CylinderMilling - Interface in nxopen.cam
Represents a Cylinder Milling Operation
To create or edit an instance of this class, use
CylinderMillingBuilder
Created in NX9.0.1
blank diamter options .
CylinderMillingBuilder.CutPatternTypes - Class in nxopen.cam
cut pattern options .
CylinderMillingBuilder.DepthPerRevolutionTypes - Class in nxopen.cam
Depth Per Revolution options .
CylinderMillingBuilder.DiameterForHelixTypes - Class in nxopen.cam
Diameter for Helix .
CylinderMillingCutParameters - Interface in nxopen.cam
Represents a CylinderMillingCutParameters Builder .
CylinderMillingCutParameters.CutDirectionTypes - Class in nxopen.cam
cut direction options .
cylinderMinAngle() - Method in interface nxopen.cae.MeshControlBuilder
Returns the cylinder min angle
License requirements: None.
cylinderMinRadius() - Method in interface nxopen.cae.MeshControlBuilder
Returns the cylinder min radius
License requirements: None.
cylinderRadius() - Method in interface nxopen.features.CircularBlendCurveBuilder
cylinderRadius() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
Returns the expression containing the value for the cylinder radius.
CYLINDRICAL - Static variable in class nxopen.annotations.DatumTargetBuilder.Types
cylindrical
CYLINDRICAL - Static variable in class nxopen.annotations.DimensionMeasurementBuilder.MeasurementMethod
Linear measurement method representing a diameter
CYLINDRICAL - Static variable in class nxopen.annotations.DimensionType
Cylindrical dimension
CYLINDRICAL - Static variable in class nxopen.annotations.GeometricCharacteristic
Specifies cylindrical characteristics
CYLINDRICAL - Static variable in class nxopen.annotations.SearchCriteriaCalloutBuilder.CalloutTypes
Cylindrical
CYLINDRICAL - Static variable in class nxopen.annotations.SearchCriteriaDatumTargetBuilder.DatumTargetTypes
cylindrical type
CYLINDRICAL - Static variable in class nxopen.cae.AssignNodalCSBuilder.CSType
cylindrical
CYLINDRICAL - Static variable in class nxopen.cae.PostGraphAlongPathBuilder.CsysType
CYLINDRICAL - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamTolZoneShape
Cylindrical
CYLINDRICAL - Static variable in class nxopen.die.QuickBinderBuilder.Types
cylindrical
CYLINDRICAL - Static variable in class nxopen.die.QuickBinderWrapBuilder.Types
Cylidrical
CYLINDRICAL - Static variable in class nxopen.display.CgfxMattexBuilder.TextureSpaceShader
Deprecated.
for cylindrical model
CYLINDRICAL - Static variable in class nxopen.Face.FaceType
Cylindrical face
CYLINDRICAL - Static variable in class nxopen.facet.FacetedFace.FacetedfaceType
Cylindrical face
CYLINDRICAL - Static variable in class nxopen.fields.SpatialMap.TypeEnum
Map to cylindrical csys
CYLINDRICAL - Static variable in class nxopen.motion.BushingBuilder.BushingTypes
Cylindrical type bushing
CYLINDRICAL - Static variable in class nxopen.motion.JointDefine.Type
This joint type is a single rotation and
a single translation.
CYLINDRICAL_FACE_TYPE - Static variable in class nxopen.uf.UFDrf.ObjectAssocPointType
CYLINDRICAL_IRONING - Static variable in class nxopen.tooling.ForceCalculationBuilder.ProcessTypes
cylindrical ironing
CYLINDRICAL_REGION - Static variable in class nxopen.annotations.RegionBuilder.Types
cylindrical
CYLINDRICAL_TEXTURE_SPACE - Static variable in class nxopen.uf.UFDisp.TextureSpaceType
CYLINDRICAL_TYPE - Static variable in class nxopen.uf.UFGdt.Characteristic
CylindricalBushing() - Constructor for class nxopen.uf.UFMotion.CylindricalBushing
CylindricalBushing(String, Tag, Tag, Tag, Tag, Tag, Tag, double, double, double, double, double, double, double, double) - Constructor for class nxopen.uf.UFMotion.CylindricalBushing
cylindricalCoefficients() - Method in interface nxopen.motion.BushingCoefficients
Returns the cylindrical coefficients, it is used in Motion.BushingBuilder.BushingTypes#CYLINDRICAL case
License requirements: None.
CylindricalCoordinateSystem - Interface in nxopen
CylindricalDimension - Interface in nxopen.annotations
Represents a cylindrical dimension
To create or edit an instance of this class, use
LinearDimensionBuilder
Created in NX4.0.0
Returns the cylindrical extension
License requirements: None.
cylindricalFace() - Method in interface nxopen.features.SweptVolumeBuilder
Returns the cylindarical face
License requirements: None.
CylindricalJoint - Interface in nxopen.mechatronics
Represents the Cylindrical Joint.
CylindricalJointBuilder - Interface in nxopen.mechatronics
CylindricalJointCollection - Interface in nxopen.mechatronics
Represents a collection of Cylindrical Joint.
cylindricalJoints() - Method in interface nxopen.mechatronics.PhysicsManager
CylindricalMillingBuilder - Interface in nxopen.cam
Represents a CylindricalMilling Builder
This is an abstract class and cannot be instantiated.
CylindricalMillingCutParameters - Interface in nxopen.cam
Represents a CylindricalMillingCutParameters Builder
This is an abstract class and cannot be instantiated.
CYLINDRICITY - Static variable in class nxopen.annotations.FeatureControlFrameBuilder.FcfCharacteristic
cylindricity
CYLINDRICITY - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.CharacteristicOptions
cylindricity
CYLINDRICITY - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.TolType
Cylindricity
cylTolerance() - Method in interface nxopen.cam.ProbeToleranceParametersBuilder
Returns the cyl tolerance
License requirements: None.
CYRILLIC - Static variable in class nxopen.features.TextBuilder.ScriptOptions
Specifies the Russian Cyrillic character set
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z _