public interface GlobalShapingBuilder
GlobalShaping
builder
FeatureCollection.createGlobalShapingBuilder(nxopen.features.GlobalShaping)
Property | Value |
---|---|
FirstRegionLimitCurveOffsetLaw.Function | ft |
FirstRegionLimitCurveOffsetLaw.LawType | Constant |
FirstRegionLimitCurveOffsetLaw.Parameter | t |
ModifyMethod | Stretch |
MovePole.DegreesAndPatches.Degree | 3 |
MovePole.DegreesAndPatches.SegmentsOrPatches | 1 |
MovePole.DegreesAndPatches.UDegree | 5 |
MovePole.DegreesAndPatches.UPatches | 1 |
MovePole.DegreesAndPatches.VDegree | 5 |
MovePole.DegreesAndPatches.VPatches | 1 |
MovePole.MoveMethod | View |
MovePole.WCSDirection | X |
Modifier and Type | Interface and Description |
---|---|
static class |
GlobalShapingBuilder.BodyMethod
Represents the body method type.
|
static class |
GlobalShapingBuilder.DeformationTypeValues
Represents the deformation type.
|
static class |
GlobalShapingBuilder.DeformBodyType
Represent sheet deformation type.
|
static class |
GlobalShapingBuilder.DirectionMethodType
Represents the direction method type.
|
static class |
GlobalShapingBuilder.ModifyMethodType
Represent surface modify method.
|
static class |
GlobalShapingBuilder.OffsetMethod
Represents the offset method type.
|
static class |
GlobalShapingBuilder.PointMethodType
Represents the point method type.
|
static class |
GlobalShapingBuilder.RadiusType
Represents radius options used.
|
static class |
GlobalShapingBuilder.RotationMethod
Represents the rotation method type.
|
static class |
GlobalShapingBuilder.RotationMethodType
Represents the rotation type.
|
static class |
GlobalShapingBuilder.TargetCurveOrientationType
Represents the orientation of the target curve(s) to the limit curves.
|
static class |
GlobalShapingBuilder.TransitionType
Represents the transition method type.
|
Modifier and Type | Method and Description |
---|---|
double |
angleTolerance()
Returns the angle tolerance
License requirements: None. |
SelectNXObjectList |
associatedObjects()
Returns the objects to transform with the deformation
License requirements: None. |
Section |
baseCurve()
Returns the base curve
License requirements: None. |
SelectNXObject |
baseSheetSelection()
Returns the base face selection
License requirements: None. |
Section |
bendCurve()
Returns the bend curve
License requirements: None. |
Section |
controlCurve()
Returns the curve control
License requirements: None. |
SelectNXObject |
controlSheetSelection()
Returns the control face selection
License requirements: None. |
GlobalShapingBuilder.DirectionMethodType |
deformationDirectionMethod()
Returns the deformation direction method
License requirements: None. |
boolean |
deformationDirectionReverse()
Returns the deformation direction reverse
License requirements: None. |
nxopen.Direction |
deformationDirectionVector()
Returns the deformation direction vector
License requirements: None. |
GlobalShapingBuilder.DeformationTypeValues |
deformationType()
Returns the deformation type
License requirements: None. |
double |
distanceTolerance()
Returns the distance tolerance
License requirements: None. |
void |
enableMovePole(boolean enable)
Enable move pole
License requirements: solid_modeling ("SOLIDS MODELING") . |
SelectDisplayableObjectList |
facetToDeform()
Returns the facet to deform
License requirements: None. |
FeatureOptions |
featureOptions()
Returns the feature options
License requirements: None. |
Section |
firstRegionLimitCurve()
Returns the first region limit curve
License requirements: None. |
LawBuilder |
firstRegionLimitCurveOffsetLaw()
Returns the region to deform offset law
License requirements: None. |
ScCollector |
firstRegionOffsetCurve()
Returns the first region offset curve
License requirements: None. |
ScCollector |
firstTargetCurve()
Returns the first target curve
License requirements: None. |
Expression |
firstTargetCurveOffset()
Returns the first target curve offset
License requirements: None. |
boolean |
flipBaseNormalDirection()
Returns the flip base normal direction
License requirements: None. |
boolean |
flipBaseUDirection()
Returns the flip base udirection
License requirements: None. |
boolean |
flipBaseVDirection()
Returns the flip base vdirection
License requirements: None. |
boolean |
flipControlNormalDirection()
Returns the flip control normal direction
License requirements: None. |
boolean |
flipControlUDirection()
Returns the flip control udirection
License requirements: None. |
boolean |
flipControlVDirection()
Returns the flip control vdirection
License requirements: None. |
int |
iterationCount()
Returns the maximum iterations count used for approximating the deformed sheet.
|
boolean |
keepBaseLength()
Returns the equal arc length toggle
License requirements: None. |
boolean |
modifyInputSheet()
Returns the modify input sheet
License requirements: None. |
GlobalShapingBuilder.ModifyMethodType |
modifyMethod()
Returns the modify method
License requirements: None. |
MovePoleBuilder |
movePole()
Returns the move pole
License requirements: None. |
GlobalShapingCurveOffsetBuilder |
newTargetCurve()
Create a new target curve
License requirements: solid_modeling ("SOLIDS MODELING") . |
GlobalShapingPointOffsetBuilder |
newTargetPoint()
Create a new target point
License requirements: solid_modeling ("SOLIDS MODELING") . |
nxopen.Direction |
projectionDirection()
Returns the projection direction
License requirements: None. |
GlobalShapingBuilder.RadiusType |
radiusOptions()
Returns the radius options
License requirements: None. |
Expression |
radiusReductionPercent()
Returns the radius reduction percent
License requirements: None. |
ScCollector |
regionEdgeCurve()
Returns the region edge curve
License requirements: None. |
Section |
regionLimitCurve()
Returns the region limit curve
License requirements: None. |
Section |
regionToDeform()
Returns the region to deform
License requirements: None. |
Expression |
regionToDeformOffset()
Returns the region boundary offset
License requirements: None. |
Expression |
rotationAngle()
Returns the rotation angle value
License requirements: None. |
LawBuilder |
rotationAngleLaw()
Returns the rotation angle law
License requirements: None. |
boolean |
rotationAngleReverseDirection()
Returns the rotation angle reverse direction
License requirements: None. |
GlobalShapingBuilder.RotationMethod |
rotationAngleType()
Returns the rotation angle type
License requirements: None. |
Expression |
rotationDistance()
Returns the rotation distance value
License requirements: None. |
LawBuilder |
rotationDistanceLaw()
Returns the rotation distance law
License requirements: None. |
Section |
rotationTargetCurve()
Returns the rotation target curve
License requirements: None. |
GlobalShapingBuilder.RotationMethodType |
rotationType()
Returns the rotation type
License requirements: None. |
Section |
secondRegionLimitCurve()
Returns the second region limit curve
License requirements: None. |
LawBuilder |
secondRegionLimitCurveOffsetLaw()
Returns the second region limit curve offset law
License requirements: None. |
ScCollector |
secondRegionOffsetCurve()
Returns the second region offset curve
License requirements: None. |
ScCollector |
secondTargetCurve()
Returns the second target curve
License requirements: None. |
Expression |
secondTargetCurveOffset()
Returns the second target curve offset
License requirements: None. |
void |
setAngleTolerance(double angleTolerance)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setBaseSheet(Body baseSheet)
Base sheet
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setControlSheet(Body controlSheet)
Control sheet
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setDeformationDirectionMethod(GlobalShapingBuilder.DirectionMethodType deformationDirectionMethod)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setDeformationDirectionReverse(boolean deformationDirectionReverse)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setDeformationDirectionVector(nxopen.Direction deformationDirection)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setDeformationType(GlobalShapingBuilder.DeformationTypeValues deformationType)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setDistanceTolerance(double distanceTolerance)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setFlipBaseNormalDirection(boolean flipBaseNormalDirection)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setFlipBaseUDirection(boolean flipBaseUDirection)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setFlipBaseVDirection(boolean flipBaseVDirection)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setFlipControlNormalDirection(boolean flipControlNormalDirection)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setFlipControlUDirection(boolean flipControlUDirection)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setFlipControlVDirection(boolean flipControlVDirection)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setIterationCount(int iterationCount)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setKeepBaseLength(boolean keepBaseLength)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setModifyInputSheet(boolean modifyInputSheet)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setModifyMethod(GlobalShapingBuilder.ModifyMethodType modifyMethod)
License requirements: None. |
void |
setProjectionDirection(nxopen.Direction projectionDirection)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setRadiusOptions(GlobalShapingBuilder.RadiusType radiusOptions)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setRegionToDeform(Section regionToDeform)
License requirements: None. |
void |
setRotationAngleReverseDirection(boolean rotationAngleReverseDirection)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setRotationAngleType(GlobalShapingBuilder.RotationMethod rotationAngleType)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setRotationType(GlobalShapingBuilder.RotationMethodType rotationType)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setSheetToDeform(ScCollector sheetToDeform)
License requirements: None. |
void |
setStretchDirection(nxopen.Direction stretchDirection)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setTargetCurveOffsetType(GlobalShapingBuilder.OffsetMethod targetCurveOffsetType)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setTargetCurveOrientation(GlobalShapingBuilder.TargetCurveOrientationType orientation)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setTargetPoint(Point targetPoint)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setTargetPointMethod(GlobalShapingBuilder.PointMethodType targetPointMethod)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setTransitionOptions(GlobalShapingBuilder.TransitionType transitionOptions)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setTransitionShapeControl(double transitionShapeControl)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setTwistAngleReverseDirection(boolean twistAngleReverseDirection)
License requirements: solid_modeling ("SOLIDS MODELING") . |
ScCollector |
sheetToDeform()
Returns the sheet to deform
License requirements: None. |
OnPathDimensionBuilder |
startLocation()
Returns the start location of control curve
License requirements: None. |
nxopen.Direction |
stretchDirection()
Returns the stretch direction
License requirements: None. |
Expression |
taperEnd()
Returns the taper end.
|
Expression |
taperStart()
Returns the taper start.
|
Section |
targetCurve()
Returns the target curve
License requirements: None. |
Expression |
targetCurveOffset()
Returns the target curve offset
License requirements: None. |
LawBuilder |
targetCurveOffsetLaw()
Returns the target curve offset law
License requirements: None. |
GlobalShapingBuilder.OffsetMethod |
targetCurveOffsetType()
Returns the target curve offset type
License requirements: None. |
GlobalShapingBuilder.TargetCurveOrientationType |
targetCurveOrientation()
Returns the orientation of the target curve to the limit curves.
|
GlobalShapingCurveOffsetBuilderList |
targetCurvesList()
Returns the target curves list
License requirements: solid_modeling ("SOLIDS MODELING") . |
Point |
targetPoint()
Returns the target point
License requirements: None. |
GlobalShapingBuilder.PointMethodType |
targetPointMethod()
Returns the target point method
License requirements: None. |
Expression |
targetPointOffset()
Returns the target point offset
License requirements: None. |
GlobalShapingPointOffsetBuilderList |
targetPointsList()
Returns the target points list
License requirements: solid_modeling ("SOLIDS MODELING") . |
ScCollector |
targetSheet()
Returns the target sheet
License requirements: None. |
LawBuilder |
transitionLaw()
Returns the transition law
License requirements: None. |
GlobalShapingBuilder.TransitionType |
transitionOptions()
Returns the transition options
License requirements: None. |
double |
transitionShapeControl()
Returns the transition shape control
License requirements: None. |
LawBuilder |
twistAngleLaw()
Returns the twist angle law
License requirements: None. |
boolean |
twistAngleReverseDirection()
Returns the twist angle reverse direction
License requirements: None. |
void |
updateDeformSheetType()
Enable move pole
License requirements: solid_modeling ("SOLIDS MODELING") . |
GlobalShapingBuilder.DeformationTypeValues deformationType() throws NXException, RemoteException
NXException
RemoteException
void setDeformationType(GlobalShapingBuilder.DeformationTypeValues deformationType) throws NXException, RemoteException
deformationType
- NXException
RemoteException
ScCollector sheetToDeform() throws NXException, RemoteException
NXException
RemoteException
void setSheetToDeform(ScCollector sheetToDeform) throws NXException, RemoteException
sheetToDeform
- NXException
RemoteException
SelectDisplayableObjectList facetToDeform() throws NXException, RemoteException
NXException
RemoteException
Section regionToDeform() throws NXException, RemoteException
NXException
RemoteException
void setRegionToDeform(Section regionToDeform) throws NXException, RemoteException
regionToDeform
- NXException
RemoteException
LawBuilder firstRegionLimitCurveOffsetLaw() throws NXException, RemoteException
NXException
RemoteException
Section bendCurve() throws NXException, RemoteException
NXException
RemoteException
Section rotationTargetCurve() throws NXException, RemoteException
NXException
RemoteException
Section regionLimitCurve() throws NXException, RemoteException
NXException
RemoteException
ScCollector regionEdgeCurve() throws NXException, RemoteException
NXException
RemoteException
Section firstRegionLimitCurve() throws NXException, RemoteException
NXException
RemoteException
Section secondRegionLimitCurve() throws NXException, RemoteException
NXException
RemoteException
LawBuilder secondRegionLimitCurveOffsetLaw() throws NXException, RemoteException
NXException
RemoteException
ScCollector firstRegionOffsetCurve() throws NXException, RemoteException
NXException
RemoteException
ScCollector secondRegionOffsetCurve() throws NXException, RemoteException
NXException
RemoteException
ScCollector targetSheet() throws NXException, RemoteException
NXException
RemoteException
Point targetPoint() throws NXException, RemoteException
NXException
RemoteException
void setTargetPoint(Point targetPoint) throws NXException, RemoteException
targetPoint
- NXException
RemoteException
GlobalShapingBuilder.PointMethodType targetPointMethod() throws NXException, RemoteException
NXException
RemoteException
void setTargetPointMethod(GlobalShapingBuilder.PointMethodType targetPointMethod) throws NXException, RemoteException
targetPointMethod
- NXException
RemoteException
Expression targetPointOffset() throws NXException, RemoteException
NXException
RemoteException
Section targetCurve() throws NXException, RemoteException
NXException
RemoteException
GlobalShapingBuilder.OffsetMethod targetCurveOffsetType() throws NXException, RemoteException
NXException
RemoteException
void setTargetCurveOffsetType(GlobalShapingBuilder.OffsetMethod targetCurveOffsetType) throws NXException, RemoteException
targetCurveOffsetType
- NXException
RemoteException
Expression targetCurveOffset() throws NXException, RemoteException
NXException
RemoteException
LawBuilder targetCurveOffsetLaw() throws NXException, RemoteException
NXException
RemoteException
ScCollector firstTargetCurve() throws NXException, RemoteException
NXException
RemoteException
Expression firstTargetCurveOffset() throws NXException, RemoteException
NXException
RemoteException
nxopen.Direction projectionDirection() throws NXException, RemoteException
NXException
RemoteException
void setProjectionDirection(nxopen.Direction projectionDirection) throws NXException, RemoteException
projectionDirection
- NXException
RemoteException
nxopen.Direction stretchDirection() throws NXException, RemoteException
NXException
RemoteException
void setStretchDirection(nxopen.Direction stretchDirection) throws NXException, RemoteException
stretchDirection
- NXException
RemoteException
ScCollector secondTargetCurve() throws NXException, RemoteException
NXException
RemoteException
Expression secondTargetCurveOffset() throws NXException, RemoteException
NXException
RemoteException
Expression regionToDeformOffset() throws NXException, RemoteException
NXException
RemoteException
GlobalShapingBuilder.DirectionMethodType deformationDirectionMethod() throws NXException, RemoteException
NXException
RemoteException
void setDeformationDirectionMethod(GlobalShapingBuilder.DirectionMethodType deformationDirectionMethod) throws NXException, RemoteException
deformationDirectionMethod
- NXException
RemoteException
nxopen.Direction deformationDirectionVector() throws NXException, RemoteException
NXException
RemoteException
void setDeformationDirectionVector(nxopen.Direction deformationDirection) throws NXException, RemoteException
deformationDirection
- NXException
RemoteException
boolean deformationDirectionReverse() throws NXException, RemoteException
NXException
RemoteException
void setDeformationDirectionReverse(boolean deformationDirectionReverse) throws NXException, RemoteException
deformationDirectionReverse
- NXException
RemoteException
GlobalShapingBuilder.RotationMethod rotationAngleType() throws NXException, RemoteException
NXException
RemoteException
void setRotationAngleType(GlobalShapingBuilder.RotationMethod rotationAngleType) throws NXException, RemoteException
rotationAngleType
- NXException
RemoteException
GlobalShapingBuilder.RotationMethodType rotationType() throws NXException, RemoteException
NXException
RemoteException
void setRotationType(GlobalShapingBuilder.RotationMethodType rotationType) throws NXException, RemoteException
rotationType
- NXException
RemoteException
Expression rotationAngle() throws NXException, RemoteException
NXException
RemoteException
Expression rotationDistance() throws NXException, RemoteException
NXException
RemoteException
LawBuilder rotationAngleLaw() throws NXException, RemoteException
NXException
RemoteException
LawBuilder rotationDistanceLaw() throws NXException, RemoteException
NXException
RemoteException
boolean rotationAngleReverseDirection() throws NXException, RemoteException
NXException
RemoteException
void setRotationAngleReverseDirection(boolean rotationAngleReverseDirection) throws NXException, RemoteException
rotationAngleReverseDirection
- NXException
RemoteException
GlobalShapingBuilder.TransitionType transitionOptions() throws NXException, RemoteException
NXException
RemoteException
void setTransitionOptions(GlobalShapingBuilder.TransitionType transitionOptions) throws NXException, RemoteException
transitionOptions
- NXException
RemoteException
LawBuilder transitionLaw() throws NXException, RemoteException
NXException
RemoteException
double transitionShapeControl() throws NXException, RemoteException
NXException
RemoteException
void setTransitionShapeControl(double transitionShapeControl) throws NXException, RemoteException
transitionShapeControl
- NXException
RemoteException
Expression radiusReductionPercent() throws NXException, RemoteException
NXException
RemoteException
Expression taperStart() throws NXException, RemoteException
NXException
RemoteException
Expression taperEnd() throws NXException, RemoteException
NXException
RemoteException
GlobalShapingBuilder.RadiusType radiusOptions() throws NXException, RemoteException
NXException
RemoteException
void setRadiusOptions(GlobalShapingBuilder.RadiusType radiusOptions) throws NXException, RemoteException
radiusOptions
- NXException
RemoteException
FeatureOptions featureOptions() throws NXException, RemoteException
NXException
RemoteException
boolean modifyInputSheet() throws NXException, RemoteException
NXException
RemoteException
void setModifyInputSheet(boolean modifyInputSheet) throws NXException, RemoteException
modifyInputSheet
- NXException
RemoteException
double distanceTolerance() throws NXException, RemoteException
NXException
RemoteException
void setDistanceTolerance(double distanceTolerance) throws NXException, RemoteException
distanceTolerance
- NXException
RemoteException
double angleTolerance() throws NXException, RemoteException
NXException
RemoteException
void setAngleTolerance(double angleTolerance) throws NXException, RemoteException
angleTolerance
- NXException
RemoteException
GlobalShapingPointOffsetBuilder newTargetPoint() throws NXException, RemoteException
NXException
RemoteException
GlobalShapingPointOffsetBuilderList targetPointsList() throws NXException, RemoteException
NXException
RemoteException
GlobalShapingCurveOffsetBuilder newTargetCurve() throws NXException, RemoteException
NXException
RemoteException
GlobalShapingCurveOffsetBuilderList targetCurvesList() throws NXException, RemoteException
NXException
RemoteException
int iterationCount() throws NXException, RemoteException
NXException
RemoteException
void setIterationCount(int iterationCount) throws NXException, RemoteException
iterationCount
- NXException
RemoteException
SelectNXObjectList associatedObjects() throws NXException, RemoteException
NXException
RemoteException
GlobalShapingBuilder.TargetCurveOrientationType targetCurveOrientation() throws NXException, RemoteException
GlobalShapingBuilder.DeformationTypeValues.WALL_DEFORMATION
.
NXException
RemoteException
void setTargetCurveOrientation(GlobalShapingBuilder.TargetCurveOrientationType orientation) throws NXException, RemoteException
orientation
- NXException
RemoteException
SelectNXObject baseSheetSelection() throws NXException, RemoteException
NXException
RemoteException
SelectNXObject controlSheetSelection() throws NXException, RemoteException
NXException
RemoteException
GlobalShapingBuilder.ModifyMethodType modifyMethod() throws NXException, RemoteException
NXException
RemoteException
void setModifyMethod(GlobalShapingBuilder.ModifyMethodType modifyMethod) throws NXException, RemoteException
modifyMethod
- NXException
RemoteException
MovePoleBuilder movePole() throws NXException, RemoteException
NXException
RemoteException
void setBaseSheet(Body baseSheet) throws NXException, RemoteException
baseSheet
- NXException
RemoteException
void setControlSheet(Body controlSheet) throws NXException, RemoteException
controlSheet
- NXException
RemoteException
Section baseCurve() throws NXException, RemoteException
NXException
RemoteException
Section controlCurve() throws NXException, RemoteException
NXException
RemoteException
void enableMovePole(boolean enable) throws NXException, RemoteException
enable
- NXException
RemoteException
LawBuilder twistAngleLaw() throws NXException, RemoteException
NXException
RemoteException
boolean twistAngleReverseDirection() throws NXException, RemoteException
NXException
RemoteException
void setTwistAngleReverseDirection(boolean twistAngleReverseDirection) throws NXException, RemoteException
twistAngleReverseDirection
- NXException
RemoteException
boolean keepBaseLength() throws NXException, RemoteException
NXException
RemoteException
void setKeepBaseLength(boolean keepBaseLength) throws NXException, RemoteException
keepBaseLength
- NXException
RemoteException
OnPathDimensionBuilder startLocation() throws NXException, RemoteException
NXException
RemoteException
void updateDeformSheetType() throws NXException, RemoteException
NXException
RemoteException
boolean flipBaseUDirection() throws NXException, RemoteException
NXException
RemoteException
void setFlipBaseUDirection(boolean flipBaseUDirection) throws NXException, RemoteException
flipBaseUDirection
- NXException
RemoteException
boolean flipBaseVDirection() throws NXException, RemoteException
NXException
RemoteException
void setFlipBaseVDirection(boolean flipBaseVDirection) throws NXException, RemoteException
flipBaseVDirection
- NXException
RemoteException
boolean flipBaseNormalDirection() throws NXException, RemoteException
NXException
RemoteException
void setFlipBaseNormalDirection(boolean flipBaseNormalDirection) throws NXException, RemoteException
flipBaseNormalDirection
- NXException
RemoteException
boolean flipControlUDirection() throws NXException, RemoteException
NXException
RemoteException
void setFlipControlUDirection(boolean flipControlUDirection) throws NXException, RemoteException
flipControlUDirection
- NXException
RemoteException
boolean flipControlVDirection() throws NXException, RemoteException
NXException
RemoteException
void setFlipControlVDirection(boolean flipControlVDirection) throws NXException, RemoteException
flipControlVDirection
- NXException
RemoteException
boolean flipControlNormalDirection() throws NXException, RemoteException
NXException
RemoteException
void setFlipControlNormalDirection(boolean flipControlNormalDirection) throws NXException, RemoteException
flipControlNormalDirection
- NXException
RemoteException
Copyright 2011 Siemens Product Lifecycle Management Software Inc. All Rights Reserved.