D-Index (NXOpen Java API Reference)

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z _

D

d() - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder: Returns the d
License requirements: None.
D - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSizeCodeType
D - Static variable in class nxopen.annotations.SizeLetterCode: Specifies size letter code "d"
d() - Method in interface nxopen.annotations.SurfaceFinishBuilder: Returns the d
License requirements: None.
D - Static variable in class nxopen.cae.DurabilityDamageEvaluationBuilder.BwiWeldClassEnum: D
D - Static variable in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.BwiWeldClassEnum: D
D - Static variable in class nxopen.cae.responsesimulation.DataLocation.Beam
D - Static variable in class nxopen.cae.responsesimulation.ElementalFunctionEvalBeamLocation
D - Static variable in class nxopen.cae.responsesimulation.NodalFunctionEvalBeamLocation: Stress Recovery point D on a beam cross section
D - Static variable in class nxopen.cam.TurnToolBuilder.HolderStyles: D-Style
d1() - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofDetailBuilder: Returns the calculated horizontal distance between plane A and plane B.
D15 - Static variable in class nxopen.cam.TurnToolBuilder.ReliefAngleTypes: Relief angle type: D (15)
d2() - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofDetailBuilder: Returns the calculated horizontal distance between plane C and plane D.
DAMAGEINTERFACE - Static variable in class nxopen.PhysicalMaterial.Type: Damage interface material
DAMPED_SINUSOID - Static variable in class nxopen.cae.AfuMathOperation.SrsToTimeOption: Damped sinusoid method
Damper - Interface in nxopen.motion: Represents a damper
To create or edit an instance of this class, use DamperBuilder

Created in NX6.0.0
DamperBuilder - Interface in nxopen.motion: Represents a DamperBuilder
To create a new instance of this class, use DamperCollection.createDamperBuilder(nxopen.motion.Damper)

Created in NX6.0.0
DamperCollection - Interface in nxopen.motion: Represents a collection of motion damper
To obtain an instance of this class, refer to MotionManager

Created in NX6.0.0
damperName() - Method in interface nxopen.motion.SpringBuilder: Returns the damper dname
License requirements: None.
dampers() - Method in interface nxopen.motion.MotionManager: Returns the Motion.DamperCollection belonging to this part
Created in NX3.0.0
damping() - Method in interface nxopen.cae.AfuOrdinateHeaderInfo: Returns the damping value
License requirements: nx_ftk ("NX Advanced Graphing")
.
damping() - Method in interface nxopen.mechatronics.AngularSpringJointBuilder: Returns the damping.
damping() - Method in interface nxopen.mechatronics.LinearSpringJointBuilder: Returns the damping.
damping() - Method in interface nxopen.mechatronics.SpringDamperBuilder: Returns the damping.
DAMPING - Static variable in class nxopen.motion.BushingCylindricalCoefficientTypes: damping type
dampingCoefficient() - Method in interface nxopen.motion.PMDCMotorBuilder: Returns the damping coefficient
License requirements: nx_motion_motor ("NX Motion Motor")
.
dampingCoefficients() - Method in interface nxopen.motion.BushingCylindricalCoefficients: Returns the damping coefficients, it is used in Motion.BushingBuilder.BushingTypes#CYLINDRICAL case
License requirements: None.
dampingCoefficients() - Method in interface nxopen.motion.BushingGeneralCoefficients: Returns the damping coefficients, it is used in Motion.BushingBuilder.BushingTypes#GENERAL case
License requirements: None.
dampingFactor() - Method in interface nxopen.cae.LaminateDampingFactorBuilder: Returns the damping factor
License requirements: None.
dampingRate - Variable in class nxopen.uf.UFMotion.SpringDamper
dampingRatio() - Method in interface nxopen.cae.PreTestExciterConfigBuilder: Returns the damping ratio
License requirements: None.
DANG_VAN - Static variable in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.FatigueSafetyFactorOutputEnum: Dang Van
DAOConstraint - Interface in nxopen.cae.optimization: Represents a DAOConstraint .
DAOConstraintBuilder - Interface in nxopen.cae.optimization: Represents a DAOConstraintBuilder .
DAOConstraintCollection - Interface in nxopen.cae.optimization: Represents the collection of optimization solution design constraint
To obtain an instance of this class, refer to DAOSolution

Created in NX8.0.0
DAODesignVariable - Interface in nxopen.cae.optimization: Represents a DAODesignVariable .
DAODesignVariableBuilder - Interface in nxopen.cae.optimization: Represents a DAODesignVariableBuilder .
DAODesignVariableBuilder.Variable - Class in nxopen.cae.optimization: Represents the design variable type
DAODesignVariableBuilder.VariableData - Class in nxopen.cae.optimization: This class holds the data returned from DAODesignVariableBuilder.getVariable()
DAODesignVariableCollection - Interface in nxopen.cae.optimization: Represents the collection of optimization solution design variable
To obtain an instance of this class, refer to DAOSolution

Created in NX8.0.0
DAOObjective - Interface in nxopen.cae.optimization: Represents a DAOObjective .
DAOOptimizationManager - Interface in nxopen.cae.optimization: Represents the Design and Analysis optimization manager that contains all optimization objects.
DAOSolution - Interface in nxopen.cae.optimization: Represents a DAOSolution .
DAOSolutionBuilder - Interface in nxopen.cae.optimization: Represents a DAOSolutionBuilder .
DAOSolutionCollection - Interface in nxopen.cae.optimization: Represents the collection of optimization solution
To obtain an instance of this class, refer to DAOOptimizationManager

Created in NX8.0.0
DAOStopCondition - Interface in nxopen.cae.optimization: Represents a DAOStopCondition .
DARK_AZURE_BLUE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_AZURE_CYAN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_BLUE_AZURE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_BLUE_VIOLET_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_CYAN_AZURE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_CYAN_TEAL_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_DULL_AZURE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_DULL_BLUE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_DULL_CYAN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_DULL_GREEN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_DULL_MAGENTA_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_DULL_ORANGE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_DULL_PINK_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_DULL_RED_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_DULL_SPRING_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_DULL_TEAL_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_DULL_VIOLET_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_DULL_YELLOW_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_FADED_BLUE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_FADED_CYAN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_FADED_GREEN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_FADED_MAGENTA_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_FADED_RED_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_FADED_YELLOW_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_GRADUATED - Static variable in class nxopen.display.TrueShadingBuilder.BgdType: Graduated dark colored background
DARK_GRAY_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_GREEN_SPRING_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_GREEN_TEAL_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_HARD_AZURE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_HARD_BLUE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_HARD_CYAN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_HARD_GREEN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_HARD_MAGENTA_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_HARD_ORANGE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_HARD_PINK_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_HARD_RED_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_HARD_SPRING_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_HARD_TEAL_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_HARD_VIOLET_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_HARD_YELLOW_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_MAGENTA_PINK_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_MAGENTA_VIOLET_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_ORANGE_RED_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_ORANGE_YELLOW_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_PINK_MAGENTA_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_PINK_RED_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_RED_ORANGE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_RED_PINK_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_SPRING_GREEN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_SPRING_YELLOW_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_TEAL_CYAN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_TEAL_GREEN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_VIOLET_BLUE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_VIOLET_MAGENTA_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_WEAK_BLUE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_WEAK_CYAN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_WEAK_GREEN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_WEAK_MAGENTA_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_WEAK_RED_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_WEAK_YELLOW_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_YELLOW_ORANGE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DARK_YELLOW_SPRING_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DASH - Static variable in class nxopen.annotations.TableCellStyleBuilder.ZeroDisplayType
dashboard() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarWizardBuilder: Returns the dashboard geometry.
DASHED - Static variable in class nxopen.annotations.EditSymbolDisplayBuilder.FontTypes: Dashed Type
DASHED - Static variable in class nxopen.assemblies.ProductOutlineBuilder.LineFont: Dashed Line
DASHED - Static variable in class nxopen.cae.ModelDisplayBuilder.FreeEdgeFont: Dashed font
DASHED - Static variable in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeFont: Dashed font
DASHED - Static variable in class nxopen.display.GridBuilder.LineStyleType
DASHED - Static variable in class nxopen.DisplayableObject.ObjectFont
DASHED - Static variable in class nxopen.drawings.CustomViewSettingsBuilder.Font: Dashed
DASHED - Static variable in class nxopen.drawings.DrawingCompareSettingsBuilder.FontType
DASHED - Static variable in class nxopen.drawings.SectionLineStyleBuilder.FontStyle: Deprecated.
DASHED - Static variable in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Font: Dashed Font.
DASHED - Static variable in class nxopen.fields.DisplayPropertiesBuilder.LineFontEnum: Dashed
DASHED - Static variable in class nxopen.LineFontBuilder.LineFontType: Dashed line font
DASHED - Static variable in class nxopen.preferences.Font: Dashed
DASHED - Static variable in class nxopen.preferences.PartDrafting.FontType: Dashed
DASHED - Static variable in class nxopen.preferences.PartModeling.GridKnotLineFontType
DASHED - Static variable in class nxopen.preferences.PartObject.LineFontType: Dashed
DASHED - Static variable in class nxopen.preferences.PartVisualizationShade.HiddenShadedFaceEdges: If selected, hidden shaded face edges are displayed in the body color with a dashed line font.
DASHED - Static variable in class nxopen.preferences.SessionModeling.PolylineStyleType
DASHED - Static variable in class nxopen.preferences.ViewVisualizationVisual.HiddenEdges
DASHED - Static variable in class nxopen.preferences.ViewVisualizationVisual.HiddenEdgeStyleType
DASHED - Static variable in class nxopen.preferences.ViewVisualizationVisual.HiddenEdgesType: Deprecated.

grid line display of all existing and subsequently created solid bodies in the selected view, except that all portions of the geometry and text that appear behind solid bodies are displayed as dashed lines
DASHED - Static variable in class nxopen.preferences.ViewVisualizationVisual.SmoothEdgeFont
DASHED - Static variable in class nxopen.ViewDependentDisplayManager.Font
DASHED_CENTER - Static variable in class nxopen.cam.DisplayPath.PathDisplayTypes: Path Display: Dashed Center
DASHED_CENTER - Static variable in class nxopen.cam.OperationDisplayOptionsBuilder.PathDisplayTypes: Path Display: Dashed Center
dashSize() - Method in interface nxopen.preferences.PartVisualizationLine: Returns the dash size.
dashSize - Variable in class nxopen.uf.UFDisp.SystemParams
dat - Variable in class nxopen.uf.UFPd.AttributeValueData
dat - Variable in class nxopen.uf.UFPd.AttributeValueData2
Data() - Constructor for class nxopen.ApparentChainingRule.Data
Data() - Constructor for class nxopen.cam.FormEdgesBuilder.Data
Data() - Constructor for class nxopen.cam.HolderSectionBuilder.Data
Data() - Constructor for class nxopen.cam.MillingTrackpointBuilder.Data
Data() - Constructor for class nxopen.cam.MultipleStepoverBuilder.Data
Data() - Constructor for class nxopen.cam.StepParamsBuilder.Data
Data() - Constructor for class nxopen.cam.TrackingBuilder.Data
Data() - Constructor for class nxopen.cam.UdtSectionBuilder.Data
Data() - Constructor for class nxopen.CurveChainRule.Data
Data() - Constructor for class nxopen.CurveFeatureChainRule.Data
Data() - Constructor for class nxopen.CurveFeatureTangentRule.Data
Data() - Constructor for class nxopen.CurveTangentRule.Data
Data() - Constructor for class nxopen.EdgeChainRule.Data
Data() - Constructor for class nxopen.EdgeIntersectRule.Data
Data() - Constructor for class nxopen.EdgeMultipleSeedTangentRule.Data
Data() - Constructor for class nxopen.EdgeTangentRule.Data
Data() - Constructor for class nxopen.EdgeVertexRule.Data
Data() - Constructor for class nxopen.EdgeVertexTangentRule.Data
Data() - Constructor for class nxopen.FaceMergedRibFacesRule.Data
Data() - Constructor for class nxopen.FaceRegionBoundaryRule.Data
Data() - Constructor for class nxopen.FaceTangentRule.Data
Data() - Constructor for class nxopen.FollowFilletRule.Data
Data() - Constructor for class nxopen.HumanReachZone.Data
Data() - Constructor for class nxopen.RegionBoundaryRule.Data
Data() - Constructor for class nxopen.SectionElementData.Data
data - Variable in class nxopen.uf.UFGdt.AskUnitBasisData
data - Variable in class nxopen.uf.UFModeling.AskObjDimensionalityData
data - Variable in class nxopen.uf.UFModeling.IntersectCurveToCurveData
data - Variable in class nxopen.uf.UFModeling.IntersectCurveToFaceData
data - Variable in class nxopen.uf.UFModeling.IntersectCurveToPlaneData
DATA_COMPONENT - Static variable in class nxopen.cae.responsesimulation.NodalFunctionEvalRequest
DATA_SOURCE - Static variable in class nxopen.cae.SimLoadRecipeMapping.OrientationTypes
database() - Method in interface nxopen.features.HumanBuilder: Returns the database for human
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
DatabaseAttributeManager - Interface in nxopen.pdm: This class is responsible for setting and getting NX Manager database attribute.
dataCharx - Variable in class nxopen.preferences.RoutingStock.DefaultStockData: The list of optional and required characteristics to apply to the new stock.
dataComponent() - Method in interface nxopen.cae.responsesimulation.ElementalFunctionEvaluationSettingBuilder: Returns the data component of direction
License requirements: nx_response_anlys ("NX Response Analysis")
.
dataComponent() - Method in interface nxopen.cae.responsesimulation.NodalFunctionEvaluationSettingBuilder: Returns the direction data component
License requirements: nx_response_anlys ("NX Response Analysis")
.
dataComponent() - Method in interface nxopen.cae.responsesimulation.StrainGageEvaluationSettingBuilder: Returns the data component of strain gage evaluation results
License requirements: nx_response_anlys ("NX Response Analysis")
.
DataContainer - Interface in nxopen: Represents a list of data.
dataControl() - Method in interface nxopen.cae.DurabilityTransientEventBuilder: Returns the data control.
dataCount - Variable in class nxopen.cae.FunctionBuilder.MathPlotData
dataDefinition() - Method in interface nxopen.features.vehicledesign.BaseDataLoadingBuilder: Returns the Data Definition option of loading.
dataDefinition() - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder: Returns the value to indicate which definition option will be used to define the loading wheel data.
dataerr - Variable in class nxopen.cae.Post.ASCIIDiffTolerances: error allowed on data values
dataFormat() - Method in interface nxopen.cae.AfuOrdinateHeaderInfo: Returns the data format
License requirements: nx_ftk ("NX Advanced Graphing")
.
DataLocation - Interface in nxopen.cae.responsesimulation: Represents the data location to perform evaluation .
dataLocation() - Method in interface nxopen.cae.responsesimulation.ModalResultsEvaluationSettingBuilder: Returns the frequency setting
License requirements: nx_response_anlys ("NX Response Analysis")
.
dataLocation() - Method in interface nxopen.cae.responsesimulation.StrengthResultsEvaluationSettingBuilder: Returns the setting of combination evaluation
License requirements: nx_response_anlys ("NX Response Analysis")
.
DataLocation.Beam - Class in nxopen.cae.responsesimulation: Specifies the location for beam
DataLocation.Element - Class in nxopen.cae.responsesimulation: Specifies the element location for element
DataLocation.Shell - Class in nxopen.cae.responsesimulation: Specifies the location for shell
DataManager - Interface in nxopen.cae.ftk: Ftk data manager
To obtain an instance of this class use Session.dataManager() .
dataManager() - Method in interface nxopen.Session: Returns the DataManager belonging to this session
Created in NX7.5.0
DataManager.AfuRecordZValue - Class in nxopen.cae.ftk: Represents the method to get Z value for afu record in 3D plot
dataParams - Variable in class nxopen.cae.Post.Streamline
datasetName() - Method in interface nxopen.PrintPDFBuilder: Returns the dataset name to be used when Creating a New PDF document in a Teamcenter environment.
dataSets() - Method in interface nxopen.features.shipdesign.ReadDataSetBuilder: Returns the index value of the available data set names
License requirements: None.
datasetType() - Method in interface nxopen.CGMBuilder: Returns the dataset type to be used when exporting a CGM to Teamcenter
License requirements: None.
datasetType() - Method in interface nxopen.PrintPDFBuilder: Returns the dataset type to be used when exporting a PDF to Teamcenter
License requirements: None.
dataSource() - Method in interface nxopen.features.shipdesign.ManufacturingStockBuilder: Returns the data source from which the intial data is read.
dataSource() - Method in interface nxopen.validate.Parser: Returns the result data source type
License requirements: None.
dataSourceType() - Method in interface nxopen.features.shipdesign.ManufacturingStockBuilder: Returns the data source from which the initial data is read.
DataStructuresUnion() - Constructor for class nxopen.uf.UFSubdiv.DataStructuresUnion
DataStructuresUnion(UFSubdiv.Isocline) - Constructor for class nxopen.uf.UFSubdiv.DataStructuresUnion
datatol - Variable in class nxopen.cae.Post.ASCIIDiffTolerances: absolute tolerance on data values
dataType() - Method in interface nxopen.AttributePropertiesBaseBuilder: Returns the data type, which determines the type of attribute to be created.
dataType() - Method in interface nxopen.AttributeTemplatesBuilder: Returns the data type.
datatype() - Method in interface nxopen.cae.BaseResultType: Returns the Result.DataType for this result type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Created in NX7.5.0
dataType() - Method in interface nxopen.cae.SimLoadRecipe: Returns the data type of a SimLoadRecipe
License requirements: None.
dataType - Variable in class nxopen.mechatronics.SignalAdapterBuilder.SignalData: Data Type
dataType() - Method in interface nxopen.tooling.LsdynaKfileGeneratorBuilder: Returns the data type
License requirements: None.
datatype - Variable in class nxopen.uf.UFKf.AskValueOfListItemData
datatype() - Method in interface nxopen.visualreporting.Condition: Returns the Property.DatatypeOption of this Condition .
dataTypeOption() - Method in interface nxopen.validate.RequirementBuilder: Returns the data type option
License requirements: None.
dataTypes - Variable in class nxopen.uf.UFKf.AskRuleTypesData
DATE - Static variable in class nxopen.annotations.TableCellStyleBuilder.CellFormatTypes: Date
DATE - Static variable in class nxopen.AttributePropertiesBaseBuilder.DataTypeOptions: Date, the value will be date and time
DATE - Static variable in class nxopen.issue.IssueProperty.Type: Date type
DATE - Static variable in class nxopen.pdm.PdmSoaqueryNxmgrfielddatatype: Date
DATE - Static variable in class nxopen.visualreporting.Property.DatatypeOption: Date datatype
date() - Method in interface nxopen.visualreporting.SpecifyDateBuilder: Returns the date
License requirements: None.
DATE_DM - Static variable in class nxopen.annotations.TableCellStyleBuilder.FormatType: Deprecated.
DATE_DMY - Static variable in class nxopen.annotations.TableCellStyleBuilder.FormatType: Deprecated.
DATE_DMY_DOT - Static variable in class nxopen.annotations.TableCellStyleBuilder.FormatType: Deprecated.
DATE_MDY - Static variable in class nxopen.annotations.TableCellStyleBuilder.FormatType: Deprecated.
DATE_MY - Static variable in class nxopen.annotations.TableCellStyleBuilder.FormatType: Deprecated.
DATE_TIME - Static variable in class nxopen.annotations.TableCellStyleBuilder.CellFormatTypes: Date-Time
DATE_Y4MD - Static variable in class nxopen.annotations.TableCellStyleBuilder.FormatType: Deprecated.
DATE_YMD - Static variable in class nxopen.annotations.TableCellStyleBuilder.FormatType: Deprecated.
dateBuf - Variable in class nxopen.uf.UF.SystemInfo
DateBuilder - Interface in nxopen: The DateBuilder class allows a date and/or time to be input or output via the DateItem builder.
dateConstraint() - Method in interface nxopen.AttributeTemplatesBuilder: Returns the date constraint.
dateFormatType() - Method in interface nxopen.annotations.TableCellStyleBuilder: Returns the cell date format.
dateItem() - Method in interface nxopen.DateBuilder: Returns a DateItemBuilder object used for simple date and time storage.
DateItemBuilder - Interface in nxopen: This class stores a date and time.
DateItemBuilder.DayOfMonth - Class in nxopen: Days of the month
DateItemBuilder.MonthOfYear - Class in nxopen: Months of the year.
DateItemBuilderList - Interface in nxopen: Represents a list of objects.
dateItemList() - Method in interface nxopen.DateBuilder: Returns a list of DateItemBuilder objects used to store a list of dates and times.
dateString() - Method in interface nxopen.visualreporting.SpecifyDateBuilder: Returns the current date as string
License requirements: None.
dateValue() - Method in interface nxopen.AttributePropertiesBaseBuilder: Returns the date value.
Datum - Interface in nxopen.annotations: Represents a datum
To create or edit an instance of this class, use PmiDatumFeatureSymbolBuilder

Created in NX4.0.0
DATUM - Static variable in class nxopen.annotations.LeaderData.ArrowheadType: Datum symbol
DATUM - Static variable in class nxopen.annotations.LeaderData.LeaderType: Datum feature symbol style
DATUM - Static variable in class nxopen.annotations.PmiFilterByType.Type: Indicates a PMI datum feature type
DATUM - Static variable in class nxopen.cam.InspectionAlignmentBuilder.RotationMethods: Rotate by Datum
DATUM - Static variable in class nxopen.cam.InspectionAlignmentBuilder.XtMethods: Translate by Datum
DATUM - Static variable in class nxopen.cam.InspectionAlignmentBuilder.YtMethods: Translate by Datum
DATUM - Static variable in class nxopen.cam.InspectionAlignmentBuilder.ZtMethods: Translate by Datum
DATUM - Static variable in class nxopen.features.BridgeCurveBuilderEx.EndObjectTypes: A datum plane or axis for symmetric constraint
DATUM - Static variable in class nxopen.features.GeodesicIntersectBuilder.Type: Datum.
DATUM - Static variable in class nxopen.features.PartGeometryCopyBuilder.Type: Datum plane, datum axis or datum coordinate system feature
datum() - Method in interface nxopen.features.PartGeometryCopySelectBuilder: Returns the datum
License requirements: None.
DATUM - Static variable in class nxopen.preferences.PartObject.ObjectType: Datum
datum - Variable in class nxopen.uf.UFSket.Info
DATUM - Static variable in class nxopen.weld.WeldAdvisorCustomerDefault: datum, used for implementing weld advisor parameters
DATUM_ARROW - Static variable in class nxopen.annotations.LeaderType
DATUM_ARROW - Static variable in class nxopen.uf.UFDrf.ArrowType
DATUM_AXES - Static variable in class nxopen.DisplayManager.ShowHideType: Show or hide datum axes
DATUM_CSYS - Static variable in class nxopen.features.shipdesign.ProfileBuilder.OrientationOption
DATUM_CSYS - Static variable in class nxopen.features.shipdesign.StiffenerBuilder.OrientationMethod: Align stiffener with one or more coordinate systems
DATUM_CSYS - Static variable in class nxopen.preferences.PartObject.ObjectType: Datum CSYS Feature
DATUM_CUSTOM1_FEATURE - Static variable in class nxopen.uf.UFConstants
DATUM_CUSTOM1FEATURE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
DATUM_CUSTOM2_FEATURE - Static variable in class nxopen.uf.UFConstants
DATUM_CUSTOM2FEATURE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
DATUM_CUSTOM3_FEATURE - Static variable in class nxopen.uf.UFConstants
DATUM_CUSTOM3FEATURE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
DATUM_DEFINITION - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.TolType: Datum Definition
DATUM_DIM - Static variable in class nxopen.annotations.LeaderType
DATUM_EXT - Static variable in class nxopen.annotations.LeaderType
DATUM_FEATURE_SYMBOL - Static variable in class nxopen.annotations.SearchModelViewBuilder.PmiTypes: datum feature symbol type
DATUM_IDENTIFIER_TYPE - Static variable in class nxopen.uf.UFGdt.ToleranceType
DATUM_INVALID_CONSTRAINTS - Static variable in class nxopen.uf.UFConstants
DATUM_LINK - Static variable in class nxopen.features.WaveLinkBuilder.Types
DATUM_LOC_HOLE_NA_TYPE - Static variable in class nxopen.uf.UFProcessAid.Types
DATUM_LOC_HOLE_TYPE - Static variable in class nxopen.uf.UFProcessAid.Types
DATUM_LOC_PIN_NA_TYPE - Static variable in class nxopen.uf.UFProcessAid.Types
DATUM_LOC_PIN_TYPE - Static variable in class nxopen.uf.UFProcessAid.Types
DATUM_LOC_SLOT_NA_TYPE - Static variable in class nxopen.uf.UFProcessAid.Types
DATUM_LOC_SLOT_TYPE - Static variable in class nxopen.uf.UFProcessAid.Types
DATUM_LOC_SURF_NA_TYPE - Static variable in class nxopen.uf.UFProcessAid.Types
DATUM_LOC_SURF_TYPE - Static variable in class nxopen.uf.UFProcessAid.Types
DATUM_LOCATOR - Static variable in class nxopen.weld.WeldObjectBuilder.CommandName: Datum Locator command
DATUM_LOCATOR - Static variable in class nxopen.weld.WeldPointExitBuilder.CommandName: Datum Locator command
DATUM_MULTIPLE_TYPE - Static variable in class nxopen.uf.UFGdt.ToleranceType
DATUM_ON_DOT_TERMINATED_LEADER - Static variable in class nxopen.annotations.LeaderType: leader type for "datum on dot terminated leader"
DATUM_PIN - Static variable in class nxopen.weld.WeldObjectBuilder.CommandName: Datum Pin command
DATUM_PIN_CUSTOM0 - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
DATUM_PIN_CUSTOM1 - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
DATUM_PIN_CUSTOM2 - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
DATUM_PIN_CUSTOM3 - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
DATUM_PIN_CUSTOM4 - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
DATUM_PIN_CUSTOM5 - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
DATUM_PIN_CUSTOM6 - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
DATUM_PIN_CUSTOM7 - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
DATUM_PIN_FEATURE - Static variable in class nxopen.uf.UFConstants
DATUM_PIN_FEATURE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
DATUM_PLANE - Static variable in class nxopen.features.AeroFlangeBuilder.GuideObjectTypes: Guide object is datum plane
DATUM_PLANE - Static variable in class nxopen.features.AeroRibBuilder.GuideObjectTypes: Guide object is datum plane
DATUM_PLANE - Static variable in class nxopen.features.ShelfBuilder.ReferenceType
DATUM_PLANE - Static variable in class nxopen.features.StepBuilder.ReferenceBoundaryTypes: Select datum plane as reference boundary object
DATUM_PLANE_GRIDS - Static variable in class nxopen.DisplayManager.ShowHideType: Show or hide datum plane grids
DATUM_PLANES - Static variable in class nxopen.DisplayManager.ShowHideType: Show or hide datum planes
DATUM_POINT - Static variable in class nxopen.uf.UFConstants
DATUM_POINT - Static variable in class nxopen.uf.UFDisp.PolyMarker
DATUM_POINT - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
DATUM_PT_TYPE - Static variable in class nxopen.uf.UFProcessAid.Types
DATUM_SURFACE - Static variable in class nxopen.weld.WeldObjectBuilder.CommandName: Datum Surface command
DATUM_SURFACE_CUSTOM0 - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
DATUM_SURFACE_CUSTOM1 - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
DATUM_SURFACE_CUSTOM2 - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
DATUM_SURFACE_CUSTOM3 - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
DATUM_SURFACE_CUSTOM4 - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
DATUM_SURFACE_CUSTOM5 - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
DATUM_SURFACE_CUSTOM6 - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
DATUM_SURFACE_CUSTOM7 - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
DATUM_SURFACE_FEATURE - Static variable in class nxopen.uf.UFConstants
DATUM_SURFACE_FEATURE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
DATUM_TARGET - Static variable in class nxopen.annotations.PmiFilterByType.Type: Indicates a PMI datum target type
DATUM_TARGET - Static variable in class nxopen.annotations.SearchModelViewBuilder.PmiTypes: datum target type
DATUM_TARGET - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.TolType
DATUM_TARGET_CYL_TYPE - Static variable in class nxopen.uf.UFGdt.ToleranceType
DATUM_TARGET_DIA_TYPE - Static variable in class nxopen.uf.UFGdt.ToleranceType
DATUM_TARGET_LINE_TYPE - Static variable in class nxopen.uf.UFGdt.ToleranceType
DATUM_TARGET_POINT_TYPE - Static variable in class nxopen.uf.UFGdt.ToleranceType
DATUM_TARGET_RECT_TYPE - Static variable in class nxopen.uf.UFGdt.ToleranceType
DATUM_TARGET_USER_DEFINED_TYPE - Static variable in class nxopen.uf.UFGdt.ToleranceType
datumAxis - Variable in class nxopen.uf.UFModl.SmcutoutData
datumAxis - Variable in class nxopen.uf.UFModl.SmholeData
datumAxis - Variable in class nxopen.uf.UFModl.SmpunchData
DatumAxisBuilder - Interface in nxopen.features: Represents a datum axis feature builder.
DatumAxisBuilder.AlternateSolution - Class in nxopen.features: Specifies the alternate solution for datum axis using point on curve method only
DatumAxisBuilder.ConstraintType - Class in nxopen.features: Specifies different constraint types for selected geometries
DatumAxisBuilder.CurveOption - Class in nxopen.features: Specifies the distance on the curve as absolute distance or relative distance as percentage
DatumAxisBuilder.CurveOrientations - Class in nxopen.features: Available orientations that the user can choose when the Datum Axis type is On Curve Vector
DatumAxisBuilder.DirectionOrientations - Class in nxopen.features: Two available direction orientations that the user can choose when the Datum Axis type is Point and Direction
DatumAxisBuilder.FixedType - Class in nxopen.features: Specifies the fixed type datum axis going thru only one specific axis or thru all axes.
DatumAxisBuilder.Types - Class in nxopen.features: New Datum Axis types in NX5
DatumAxisBuilder.UseArcLength - Class in nxopen.features: Specifies points for which arclength is to be used.
DatumBuilder - Interface in nxopen.features: Represents a builder for datum features.
DatumCollection - Interface in nxopen: Represents a collection of datum geometry.
DatumCommonBuilder - Interface in nxopen.weld: Used to create or edit a DatumSurface or DatumPin feature.
DatumCommonBuilder.ControlMethodTypes - Class in nxopen.weld: Settings for the method used to define the control direction.
DatumCommonBuilder.CreationDirectionMethods - Class in nxopen.weld: Settings to define the creation direction.
DatumCommonBuilder.CustomTypes - Class in nxopen.weld: The custom type of the datum specified for creation.
DatumCommonBuilder.SolidTypes - Class in nxopen.weld: Settings for defining the solid type to create for the datum object.
DatumConstraint - Interface in nxopen: Represents a constraint that specifies the location of a nxopen.features.DatumFeature .
DatumConstraint.CurveOption - Class in nxopen: Specifies the distance on the curve as absolute distance or relative distance as percentage
DatumConstraint.Solution - Class in nxopen: Specifies the alternate solution for datum axis using point on curve method
DatumConstraint.Type - Class in nxopen: Specifies different constraint types for selected geometries
DatumCsys - Interface in nxopen.features: Represents a Datum Coordinate System feature.
DatumCsysBuilder - Interface in nxopen.features: Represents a datum csys builder
To create a new instance of this class, use FeatureCollection.createDatumCsysBuilder(Feature)

Created in NX4.0.0
DatumCsysBuilder.WaveLinkInformationData - Class in nxopen.features: This class holds the data returned from DatumCsysBuilder.getWaveLinkInformation()
DatumData - Interface in nxopen.annotations: Represents datum data .
datumExtendedText() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder: Returns the datum extended text
License requirements: None.
datumExtendedTextToggle() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder: Returns the datum extended text toggle
License requirements: None.
datumExtendedTextType() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder: Returns the datum extended text toggle
License requirements: None.
datumFace() - Method in interface nxopen.tooling.BlankGeneratorBuilder: Returns the face used to update a blank.
datumFeature - Variable in class nxopen.uf.UFGdt.DatumReference
datumFeature - Variable in class nxopen.uf.UFGdt.DatumTargetLine
datumFeature - Variable in class nxopen.uf.UFGdt.DatumTargetPoint
datumFeature - Variable in class nxopen.uf.UFGdt.TargetCylArea
datumFeature - Variable in class nxopen.uf.UFGdt.TargetDiaArea
datumFeature - Variable in class nxopen.uf.UFGdt.TargetRectArea
datumFeature - Variable in class nxopen.uf.UFGdt.TargetUdefArea
datumFeatures - Variable in class nxopen.uf.UFGdt.MultipleDatum
DatumFeatureSymbolBuilder - Interface in nxopen.annotations: Represents a Base Datum Feature Symbol Builder for all types of datum feature symbols
This is an abstract class, and cannot be instantiated.
datumFeatureSymbolCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder: Returns the datum feature symbol compare
License requirements: None.
datumFeatureSymbolLabel() - Method in interface nxopen.annotations.SearchCriteriaDatumFeatureSymbolBuilder: Returns the datum feature symbol label
License requirements: None.
datumFeatureSymbolLeaderTerminatorCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder: Returns the datum feature symbol leader info compare
License requirements: None.
datumFeatureSymbolOriginCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder: Returns the datum feature symbol origin compare
License requirements: None.
datumFeatureSymbolRetainedStatusCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder: Returns the datum feature symbol retained status compare
License requirements: None.
datumFeatureSymbolTextCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder: Returns the datum feature symbol text compare
License requirements: None.
datumFirstReferenceDirection() - Method in interface nxopen.weld.WeldPointBuilder: Returns the datum reference direction type.
DatumIconBuilder - Interface in nxopen.weld: Represents a DatumIconBuilder class used to control the part navigator icon for Datum Pin and Surface Locators.
datumIconHandler(DatumIconBuilder) - Method in interface nxopen.weld.CustomManager.DatumIconHandler: Method called from the part navigator to define the datum surface and pin icon.
DatumIdentifier() - Constructor for class nxopen.uf.UFGdt.DatumIdentifier
DatumIdentifier(String, Tag, boolean) - Constructor for class nxopen.uf.UFGdt.DatumIdentifier
datumIdLowerRange() - Method in interface nxopen.weld.WeldPreferenceBuilder: Returns the datum id lower range
License requirements: None.
datumIdUpperRange() - Method in interface nxopen.weld.WeldPreferenceBuilder: Returns the datum id upper range
License requirements: None.
datumLabel() - Method in interface nxopen.annotations.DatumReference: Returns the datum label
License requirements: None.
datumLabel() - Method in interface nxopen.annotations.DatumTargetData: Returns the datum label.
datumLabel() - Method in interface nxopen.annotations.IDatumTarget: Returns the datum target label.
datumLabel() - Method in interface nxopen.annotations.PmiPreferences: Returns the initial letter for datum labels
License requirements: None.
datumLabel - Variable in class nxopen.uf.UFGdt.DatumIdentifier
datumLengthPastArrow() - Method in interface nxopen.annotations.LineAndArrowPreferences: Returns the datum extension line past the arrow distance
License requirements: None.
datumLengthPastArrow() - Method in interface nxopen.annotations.LineArrowStyleBuilder: Returns the distance from the apex of the datum arrowhead to the end of the extension line
License requirements: None.
datumLengthPastArrow - Variable in class nxopen.uf.UFDrf.LineArrowPreferences
datumMajorDirection() - Method in interface nxopen.weld.WeldPointBuilder: Returns the datum major direction type.
datumMCMToggle() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder: Returns the datum mcm toggle
License requirements: None.
datumMCMType() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder: Returns the datum mcm enum
License requirements: None.
datumMovable() - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder: Returns the movable datum target type
License requirements: None.
datumNamePrefix() - Method in interface nxopen.weld.WeldPreferenceBuilder: Returns the datum name prefix
License requirements: None.
datumObjectColor() - Method in interface nxopen.weld.WeldPreferenceBuilder: Returns the datum object color
License requirements: None.
datumObjectLayer() - Method in interface nxopen.weld.WeldPreferenceBuilder: Returns the datum object layer
License requirements: None.
datumOnDotTerminatedArrowhead() - Method in interface nxopen.annotations.LeaderData: Returns the datum arrowhead type for the datum portion of a datum on dot terminated leader
License requirements: None.
datumOnDotTerminatedEndPoint() - Method in interface nxopen.annotations.LeaderData: Returns the datum end point for the leader segment of the datum portion of a datum on dot terminated leadet
License requirements: None.
datumOnDotTerminatedStartPoint() - Method in interface nxopen.annotations.LeaderData: Returns the datum start point for the leader segment of the datum portion of a datum on dot terminated leader
License requirements: None.
datumPartNumber() - Method in interface nxopen.weld.WeldPreferenceBuilder: Returns the datum part number
License requirements: None.
datumPin() - Method in interface nxopen.weld.DatumIconBuilder: Returns the DatumPin feature.
DatumPin - Interface in nxopen.weld: Represents a Weld Datum Pin feature
To create or edit an instance of this class, use DatumPinBuilder

Created in NX8.5.0
DatumPinBuilder - Interface in nxopen.weld: Used to create or edit a DatumPin feature.
DatumPlane - Interface in nxopen: Represents a datum plane
This object can not be created by KF it's the display objet of the datum plane
.
datumPlane() - Method in interface nxopen.features.sheetmetal.GussetBuilder: Returns the plane of the gusset profile.
datumPlane() - Method in interface nxopen.tooling.QuickQuotationBuilder: Create a datum plane.
datumPlane - Variable in class nxopen.uf.UFWave.AskLinkMirrorData
DatumPlane.CornerPointsData - Class in nxopen: This class holds the data returned from DatumPlane.getCornerPoints()
DatumPlaneBuilder - Interface in nxopen.features: Represents a datum plane feature builder.
DatumPlaneBuilder.AlternateSolution - Class in nxopen.features: Specifies the alternate solution for a datum plane using point on curve method
DatumPlaneBuilder.ConstraintType - Class in nxopen.features: Specifies different constraint types of selected geometries
DatumPlaneBuilder.CurveOption - Class in nxopen.features: Specifies the distance on the curve as absolute distance or relative distance as percentage
DatumPlaneBuilder.FixedType - Class in nxopen.features: Specifies the fixed type datum plane going thru only one specific plane or thru all planes
DatumPlaneBuilder.UseArcLength - Class in nxopen.features: Specifies points for which arclength is to be used.
datumPlaneFitting() - Method in interface nxopen.cam.InspectionAnalyzeBuilder: Returns the analysis datum plane fitting type
License requirements: None.
datumPlaneFittingMode() - Method in interface nxopen.cam.InspectionMethodBuilder: Returns the analysis datum plane fitting mode
License requirements: None.
datumPlaneFittingModeBuilder() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder: Returns the Datum Plane Fitting Mode Builder
License requirements: None.
DatumPlaneGrid - Interface in nxopen.display: Represents a grid on a datum plane
Datum plane grids are not supported in KF.
DatumPlaneGridBuilder - Interface in nxopen.display: Represents the builder for adding a datum plane grid DatumPlaneGrid to a datum plane.
DatumPlaneGridBuilder.GridOrientationType - Class in nxopen.display: Specifies grid orientation option to be used for grid display.
datumPlaneLayer() - Method in interface nxopen.features.SectionInertiaAnalysisBuilder: Returns the datum plane layer
License requirements: None.
datumPlanes() - Method in interface nxopen.features.SectionInertiaAnalysisBuilder: Returns the datum planes
License requirements: None.
datumPlanes() - Method in interface nxopen.features.shipdesign.TraceLinesBuilder: Returns the datum planes
License requirements: None.
datumPoint - Variable in class nxopen.uf.UFProcessAid.AskDatumObjectsData
DatumReference - Interface in nxopen.annotations: Represents a datum reference .
DatumReference() - Constructor for class nxopen.uf.UFGdt.DatumReference
DatumReference(Tag, UFGdt.MaterialModifier[], int) - Constructor for class nxopen.uf.UFGdt.DatumReference
datumReference - Variable in class nxopen.uf.UFGdt.DrfReference
DatumReferenceBuilder - Interface in nxopen.annotations: Represents a DatumReferenceBuilder
To create a new instance of this class, use AnnotationManager.createEmptyDatumReferenceBuilder()

Created in NX6.0.0
DatumReferenceBuilder.DatumReferenceMaterialCondition - Class in nxopen.annotations: Specifies the material modifier condition for the datum reference
DatumReferenceBuilderList - Interface in nxopen.annotations: Represents a list of objects.
datumReferenceList() - Method in interface nxopen.annotations.CompoundDatumReferenceBuilder: Returns the list of datum references
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
datums() - Method in interface nxopen.annotations.AnnotationManager: Datum collection .
datums() - Method in interface nxopen.BasePart: Returns the DatumCollection instance belonging to this part .
DATUMS - Static variable in class nxopen.DisplayManager.ShowHideType: Show or hide Datums i.e Coordinate Systems Datum Axes, Datum Planes, Datum Plane Grids, Points
datums() - Method in interface nxopen.features.WaveDatumBuilder: Returns the datum to link
License requirements: None.
datums - Variable in class nxopen.uf.UFGdt.AskDatumsOfFeatureData
datumSecondReferenceDirection() - Method in interface nxopen.weld.WeldPointBuilder: Returns the datum reference direction type.
datumSurface() - Method in interface nxopen.weld.DatumIconBuilder: Returns the DatumSurface feature.
DatumSurface - Interface in nxopen.weld: Represents a Weld Datum Surface feature
To create or edit an instance of this class, use DatumSurfaceBuilder

Created in NX8.5.0
DatumSurfaceBuilder - Interface in nxopen.weld: Used to create or edit a DatumSurface feature.
DatumSurfaceBuilder.Types - Class in nxopen.weld: Settings to indicate the construction type used for the datum surface.
datumTag - Variable in class nxopen.uf.UFSket.Info
DatumTarget - Interface in nxopen.annotations: Represents a datum target
To create or edit an instance of this class, use PmiDatumTargetBuilder

Created in NX4.0.0
DatumTargetBuilder - Interface in nxopen.annotations: Represents a Datum target Builder
This is an abstract class, and cannot be instantiated.
DatumTargetBuilder.StandardTypes - Class in nxopen.annotations: represents the datum target standards
DatumTargetBuilder.TerminatorTypes - Class in nxopen.annotations: represents the datum target terminator type
DatumTargetBuilder.Types - Class in nxopen.annotations: datum symbol type
DatumTargetCollection - Interface in nxopen.annotations: Represents a collection of DatumTarget objects
To obtain an instance of this class, refer to AnnotationManager

Created in NX4.0.0
datumTargetCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder: Returns the datum target compare
License requirements: None.
DatumTargetData - Interface in nxopen.annotations: Represents datum target data .
datumTargetLabelText() - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder: Returns the datum target label text
License requirements: None.
datumTargetLeaderTerminatorCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder: Returns the datum target leader info compare
License requirements: None.
DatumTargetLine() - Constructor for class nxopen.uf.UFGdt.DatumTargetLine
DatumTargetLine(Tag, Tag, double[], double[], Tag, int) - Constructor for class nxopen.uf.UFGdt.DatumTargetLine
datumTargetOriginCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder: Returns the datum target origin compare
License requirements: None.
DatumTargetPoint() - Constructor for class nxopen.uf.UFGdt.DatumTargetPoint
DatumTargetPoint(Tag, double[], Tag, int) - Constructor for class nxopen.uf.UFGdt.DatumTargetPoint
datumTargetRetainedStatusCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder: Returns the datum target retained status compare
License requirements: None.
datumTargets() - Method in interface nxopen.annotations.AnnotationManager: DatumTarget collection .
datumTargetStandard() - Method in interface nxopen.annotations.DatumTargetBuilder: Returns the datum target standard.
datumTargetTextCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder: Returns the datum target text compare
License requirements: None.
datumTargetType() - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder: Returns the datum target type enum
License requirements: None.
datumText() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder: Returns the datum text
License requirements: None.
datumToggle() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder: Returns the datum toggle
License requirements: None.
datumType - Variable in class nxopen.uf.UFProcessAid.IsDatumObjectData
datumVector - Variable in class nxopen.uf.UFProcessAid.AskDatumObjectsData
datumXform - Variable in class nxopen.uf.UFWave.AskLinkMirrorData
daxes - Variable in class nxopen.uf.UFModlFeatures.AskDatumCsysComponentsData
day() - Method in interface nxopen.DateItemBuilder: Returns the day
License requirements: None.
day - Variable in class nxopen.NXObject.ComputationalTime
day - Variable in class nxopen.uf.UFPs.KernelVersion
day - Variable in class nxopen.Validation.LookupTimeData: Date associate with the key
DAY - Static variable in class nxopen.visualreporting.Classifier.DateGroupMethodOption: The date grouping by day will be used
DAY01 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
DAY02 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
DAY03 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
DAY04 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
DAY05 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
DAY06 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
DAY07 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
DAY08 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
DAY09 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
DAY10 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
DAY11 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
DAY12 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
DAY13 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
DAY14 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
DAY15 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
DAY16 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
DAY17 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
DAY18 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
DAY19 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
DAY20 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
DAY21 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
DAY22 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
DAY23 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
DAY24 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
DAY25 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
DAY26 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
DAY27 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
DAY28 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
DAY29 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
DAY30 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
DAY31 - Static variable in class nxopen.DateItemBuilder.DayOfMonth
daylightBottomLeft() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder: Returns the left Daylight Bottom additional geometry.
daylightBottomLeft() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarWizardBuilder: Returns the left daylight opening bottom point.
daylightBottomLeft() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder: Returns the left Daylight Bottom additional geometry.
daylightBottomLeft() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarWizardBuilder: Returns the left daylight opening bottom point.
daylightBottomLeftFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder: Returns the left Daylight Bottom additional geometry flag.
daylightBottomLeftFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder: Returns the left Daylight Bottom additional geometry flag.
daylightBottomRight() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder: Returns the right Daylight Bottom additional geometry.
daylightBottomRight() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarWizardBuilder: Returns the right daylight opening bottom point.
daylightBottomRight() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder: Returns the right Daylight Bottom additional geometry.
daylightBottomRight() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarWizardBuilder: Returns the right daylight opening bottom point.
daylightBottomRightFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder: Returns the right Daylight Bottom additional geometry flag.
daylightBottomRightFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder: Returns the right Daylight Bottom additional geometry flag.
daylightOpeningLeft() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarWizardBuilder: Returns the left forward daylight opening geometry.
daylightOpeningLeft() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarWizardBuilder: Returns the left forward daylight opening geometry.
daylightOpeningLeft() - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailWizardBuilder: Returns the left forward daylight opening geometry.
daylightOpeningLeft() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailWizardBuilder: Returns the left forward daylight opening geometry.
daylightOpeningRight() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarWizardBuilder: Returns the right forward daylight opening geometry.
daylightOpeningRight() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarWizardBuilder: Returns the right forward daylight opening geometry.
daylightOpeningRight() - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailWizardBuilder: Returns the right forward daylight opening geometry.
daylightOpeningRight() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailWizardBuilder: Returns the right forward daylight opening geometry.
DB - Static variable in class nxopen.cae.xyplot.AxisType: Db type
dbcMld() - Method in interface nxopen.UFSession
dbDecades() - Method in interface nxopen.cae.xyplot.AxisStyleSetting: Returns the number of dB decades to display.
dbEdgeDistance() - Method in interface nxopen.tooling.DieBaseBuilder: Returns the distance to die base edge.
dbgEnd(UFVariant) - Method in interface nxopen.uf.UFSim: Refer to UF_SIM_dbg_end for documentation.
dbgSetOutput(UFVariant, boolean, String) - Method in interface nxopen.uf.UFSim: Refer to UF_SIM_dbg_set_output for documentation.
dbgStart(UFVariant, String) - Method in interface nxopen.uf.UFSim: Refer to UF_SIM_dbg_start for documentation.
dbgWriteMessage(UFVariant, String) - Method in interface nxopen.uf.UFSim: Refer to UF_SIM_dbg_write_message for documentation.
dblArray - Variable in class nxopen.uf.UFParam.AskDoubleVlaData
dblDefault - Variable in class nxopen.uf.UFParam.IndexAttribute
dbRef() - Method in interface nxopen.cae.xyplot.AxisStyleSetting: Returns the dB reference value for a dB axis type.
dbRefPointX() - Method in interface nxopen.tooling.DieBaseBuilder: Returns the X coordinates of reference point.
dbRefPointY() - Method in interface nxopen.tooling.DieBaseBuilder: Returns the Y coordinates of reference point.
dbScale() - Method in interface nxopen.cae.xyplot.AxisStyleSetting: Returns the dB scale.
dcm3AddFixConstraint - Variable in class nxopen.routing.SegmentManager.SubdivideOption
dcm3AddPoints - Variable in class nxopen.routing.SegmentManager.SubdivideOption: Add Points to subdivided splines to maintain shape
dcm3CreateTangency - Variable in class nxopen.routing.SegmentManager.SubdivideOption: Create Tangency at subdivision point when subdividing splines
dCoefficient - Variable in class nxopen.uf.UFFacet.AskPlaneEquationData
DCTK_COLLISION - Static variable in class nxopen.sim.SimDebugBuilder.TraceType: Trace Dctk Collision
DCTK_DISPLAY - Static variable in class nxopen.sim.SimDebugBuilder.TraceType: Trace Dctk Display
DCTK_MOVEMENTS - Static variable in class nxopen.sim.SimDebugBuilder.TraceType: Trace Dctk Movements
DCTK_SETTINGS - Static variable in class nxopen.sim.SimDebugBuilder.TraceType: Trace Dctk Settings
DCTK_WRITE_COLLISION_PAIRS - Static variable in class nxopen.sim.SimDebugBuilder.UiType: Write Collision Pairs
DDAM - Static variable in class nxopen.cae.responsesimulation.RSEvent.Type
ddamCoefficientA() - Method in interface nxopen.cae.responsesimulation.RSEventSolverParameters: Returns the DDAM A coefficient
License requirements: nx_response_anlys ("NX Response Analysis")
.
ddamCoefficientV() - Method in interface nxopen.cae.responsesimulation.RSEventSolverParameters: Returns the DDAM V coefficient
License requirements: nx_response_anlys ("NX Response Analysis")
.
DDAMComponentData - Interface in nxopen.cae.responsesimulation: Represents an excitation on one specified direction.
DDAMComponentData.LoadingType - Class in nxopen.cae.responsesimulation: Specifies the loading type
DDAMComponentData.ResponseType - Class in nxopen.cae.responsesimulation: Specifies the response type
DDAMExcitation - Interface in nxopen.cae.responsesimulation: Represents an DDAM excitation.
DDAMExcitation.CoefficientDefinitionType - Class in nxopen.cae.responsesimulation: the choices of define DDAM coefficients.
DDAMExcitation.LoadingType - Class in nxopen.cae.responsesimulation: Specifies the loading type
DDAMExcitation.MountingType - Class in nxopen.cae.responsesimulation: Specifies the mounting type
DDAMExcitation.ResponseType - Class in nxopen.cae.responsesimulation: Specifies the response type
DDAMExcitation.ShipType - Class in nxopen.cae.responsesimulation: Specifies the ship type
DDAMExcitationBuilder - Interface in nxopen.cae.responsesimulation: Represents the manager to DDAMExcitation .
dDatumAxis - Variable in class nxopen.uf.UFModl.SmslotData
DDMMM - Static variable in class nxopen.annotations.TableCellStyleBuilder.DateFormatTypes
DDMMMYYYY - Static variable in class nxopen.annotations.TableCellStyleBuilder.DateFormatTypes
DDMMYYYY - Static variable in class nxopen.annotations.TableCellStyleBuilder.DateFormatTypes
DE_EMPHASIS - Static variable in class nxopen.visualreporting.GroupLabel.DisplayStyleOption: Matching objects will be de-emphasized
deactivate() - Method in interface nxopen.assemblies.PositioningTask: Deactivates the PositioningTask .
deactivate() - Method in interface nxopen.geometricutilities.PartModuleOutputBuilder: Deprecated.
Deprecated in NX9.0.0. Please use PartModule.activate(boolean) instead.
deactivate() - Method in interface nxopen.layout2d.Component: Deactivates the component.
deactivate(Sketch.ViewReorient, Sketch.UpdateLevel) - Method in interface nxopen.Sketch: Deactivates the sketch
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
DEACTIVATE_GRAPH_CONTROL - Static variable in class nxopen.mechatronics.GraphControlBuilder.EndAction: deactivate this graph control.
deactivateCurrentVisualReport() - Method in interface nxopen.visualreporting.VisualReportManager: Deactivates the VisualReportManager.current() visual report.
deactivatedPage() - Method in interface nxopen.uistyler.PageSwitchData: Returns the deactivated page
License requirements: None.
deactivateGrid(UFDisp.GridContext, boolean) - Method in interface nxopen.uf.UFDisp: Refer to UF_DISP_deactivate_grid for documentation.
deactivatePositioningGroup(PositioningGroup) - Method in interface nxopen.assemblies.PositioningTask: Deactivates the nxopen.assemblies.PositioningGroup in the positioning task.
deactiveAll() - Method in interface nxopen.motion.PhysicsConversionBuilder: The deactive button.
DEBUG_UI - Static variable in class nxopen.sim.SimDebugBuilder.DumpType: Dump Debug UI
debugFlag() - Method in interface nxopen.RuleManager: Returns the debug update flag.
DebugInstance() - Constructor for class nxopen.RuleManager.DebugInstance
DebugInstance(String, String, String, int, int) - Constructor for class nxopen.RuleManager.DebugInstance: Constructor for the DebugInstance object.
DebugInstancesData() - Constructor for class nxopen.RuleManager.DebugInstancesData
DebugRule() - Constructor for class nxopen.RuleManager.DebugRule
DebugRule(String, String, String, String, String) - Constructor for class nxopen.RuleManager.DebugRule: Constructor for the DebugRule object.
DEC - Static variable in class nxopen.DateItemBuilder.MonthOfYear
DECADE - Static variable in class nxopen.cae.AfuMathOperation.TimeToSrsAxisType: Points per Standard Decade
Decal - Interface in nxopen: Represents a Material Texture decal pair
This class is restricted to being called from a program running during an Interactive NX session.
DecalBuilder - Interface in nxopen.display: Represents a DecalBuilder
This class is restricted to being called from a program running during an Interactive NX session.
DecalBuilder.Anchor - Class in nxopen.display: image anchor
DecalBuilder.DecalIllumination - Class in nxopen.display: decal illumination type
DecalBuilder.ImageSize - Class in nxopen.display: image size type
DecalBuilder.Scaling - Class in nxopen.display: decal scaling type
DecalCollection - Interface in nxopen.display: Represents a collection decal material texture
This class is restricted to being called from a program running during an Interactive NX session.
decalName() - Method in interface nxopen.display.DecalBuilder: Returns the decal name
License requirements: None.
decalReflectivity() - Method in interface nxopen.display.DecalBuilder: Returns the decal reflectivity
License requirements: None.
decals() - Method in interface nxopen.BasePart: Returns the Display.DecalCollection instance belonging to this part
Created in NX3.0.0
DECIMAL - Static variable in class nxopen.annotations.DimensionTextFormat: Specifies decimal format
DECIMAL - Static variable in class nxopen.uf.UFDrf.FractionType
DECIMAL_DEGREE - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.AngleFormat: Decimal Degrees
DECIMAL_DEGREES - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.AngularUnitsOptions: Use decimal degrees
DECIMAL_POINT_COMMA - Static variable in class nxopen.uf.UFDrf.DecimalPointCharacter
DECIMAL_POINT_PERIOD - Static variable in class nxopen.uf.UFDrf.DecimalPointCharacter
DecimalFormat - Class in nxopen.cae.xyplot: Represents the decimal number format
decimalFormat - Variable in class nxopen.uf.UFGdt.DepthTolerance
decimalFormat - Variable in class nxopen.uf.UFGdt.ProjZone
decimalFormat - Variable in class nxopen.uf.UFGdt.ToleranceValue
decimalFormat - Variable in class nxopen.uf.UFGdt.ToleranceZone
decimalFormat - Variable in class nxopen.uf.UFGdt.UnitBasis
decimalPlace() - Method in interface nxopen.annotations.CoordinateNoteBuilder: Returns the decimal place for coordinate note display
License requirements: None.
decimalPlaces() - Method in interface nxopen.annotations.HoleTableSettingsFormatBuilder: Returns the decimal places
License requirements: None.
decimalPlaces() - Method in interface nxopen.annotations.ShipDraftingFramebarGeneralBuilder: Returns the decimal places
License requirements: None.
decimalPlaces() - Method in interface nxopen.tooling.ForceCalculationBuilder: Returns the decimal places of the calculated force result.
decimalPlaces - Variable in class nxopen.uf.UFUi.AskIwDecimalPlacesData
DecimalPointCharacter - Class in nxopen.annotations: Specifies the decimal point character
decimalPointCharacter() - Method in interface nxopen.annotations.UnitsFormatPreferences: Returns the decimal point character
License requirements: None.
decimalPointCharacter() - Method in interface nxopen.annotations.UnitsStyleBuilder: Returns the decimal point character
License requirements: None.
DecimalPointCharacter - Class in nxopen.preferences: Specifies the decimal point character for view angle display
decimalPointCharacter - Variable in class nxopen.uf.UFDrf.UnitsFormatPreferences
decimals() - Method in interface nxopen.cam.RoundPointBuilder: Returns the decimal places
License requirements: None.
DecimateFacetBodyBuilder - Interface in nxopen.facet: Represents a DecimateFacetBodyBuilder .
DecimateFacetBodyBuilder.DecimateMethodType - Class in nxopen.facet: Decimate Method
decimateMethod() - Method in interface nxopen.facet.DecimateFacetBodyBuilder: Returns the decimation method
License requirements: None.
decimationOrder() - Method in interface nxopen.cae.DurabilityDataControlBuilder: Returns the decimation order.
decimationOrder() - Method in interface nxopen.cae.responsesimulation.ResponseResultsEvaluationSettingBuilder: Returns the decimation order of domain setting.
decisionAction() - Method in interface nxopen.validate.OverrideBuilder: Returns the decision action of override request The decision action is automatically pending while override request is created.
decisionUser() - Method in interface nxopen.validate.OverrideBuilder: Returns the decision user The decision user is a Teamcenter user in the Validation Administration group.
Deck - Interface in nxopen.features.shipdesign: Represents a Deck feature in Basic Design.
DECK - Static variable in class nxopen.features.shipdesign.ShipDesignPreferencesBuilder.Types: Deck type
DECK - Static variable in class nxopen.features.shipdesign.ShipnamesBuilderType
DECK_FRAMES - Static variable in class nxopen.features.shipdesign.ShipSectionBuilder.ZFilter
DECK_UNIT - Static variable in class nxopen.cae.MechanicalLoadSumBuilder.UserUnit: Load unit = same as Solver Deck Unit
DeckBuilder - Interface in nxopen.features.shipdesign: This class is used to create or edit a Deck feature.
DeckBuilder.Types - Class in nxopen.features.shipdesign: Indicates the method that is being used to define the mold face of the deck.
deckCoord() - Method in interface nxopen.features.shipdesign.DeckListItemBuilder: Returns the expression containing the zCoord of Deck.
deckCutoutsSection() - Method in interface nxopen.die.DieShoeBuilder: Returns the cutout sections in the main deck
License requirements: None.
deckEdgeOffset() - Method in interface nxopen.tooling.DieDesDrawDieBuilder: Returns the deck edge offset, which is used for define the deck edge offset value of the die.
deckEnum() - Method in interface nxopen.features.shipdesign.ShipIntersectionsBuilder: Returns the output option for the Longitudinal Z Frames
License requirements: None.
deckFlangeThickness() - Method in interface nxopen.tooling.DieDesDrawDieBuilder: Returns the deck flange thickness, which is used for define the flange thickness of the die.
deckList() - Method in interface nxopen.features.shipdesign.DecksBuilder: Returns the list of DeckListItemBuilder defining the decks parameters.
DeckListItemBuilder - Interface in nxopen.features.shipdesign: Represents a DeckListItemBuilder.
DeckListItemBuilder.DatumDir - Class in nxopen.features.shipdesign: Represents the thickening direction.
DeckListItemBuilderList - Interface in nxopen.features.shipdesign: Represents a list of objects.
deckName() - Method in interface nxopen.features.shipdesign.DeckListItemBuilder: Returns the deck name.
deckParent() - Method in interface nxopen.die.DrawDiePunchBuilder: Returns the deck builder of the draw die punch.
DeckParentBuilder - Interface in nxopen.die: Represents a Die Deck Feature sub feature.
DeckParentBuilder.MainDeckData - Class in nxopen.die: This class holds the data returned from DeckParentBuilder.getMainDeck()
deckProfile() - Method in interface nxopen.tooling.DieDesignLowerBinderBuilder: Returns the deck profile used to create Lower Binder
License requirements: ug_die_design ("Die Design")
.
decks() - Method in interface nxopen.annotations.BaseFrameBarBuilder: Returns the decks
License requirements: None.
DECKS - Static variable in class nxopen.annotations.FrameBarElements
DECKS - Static variable in class nxopen.annotations.ShipDimensionBuilder.GroupType: Group type Decks
Decks - Interface in nxopen.features.shipdesign: Represents a decks feature
To create or edit an instance of this class, use DecksBuilder

Created in NX5.0.0
DecksBuilder - Interface in nxopen.features.shipdesign: Represents a Decks builder.
decksLabelColor() - Method in interface nxopen.annotations.FrameBarPreferences: Returns the label color
License requirements: None.
decksLabelFont() - Method in interface nxopen.annotations.FrameBarPreferences: Returns the label font
License requirements: None.
decksLabelItalicized() - Method in interface nxopen.annotations.FrameBarPreferences: Returns the label italicized
License requirements: None.
decksLabelName() - Method in interface nxopen.annotations.FrameBarPreferences: Returns the label name
License requirements: None.
decksLabelWidth() - Method in interface nxopen.annotations.FrameBarPreferences: Returns the label width
License requirements: None.
decksStyle() - Method in interface nxopen.annotations.FrameBarStyleBuilder: Returns the style decks
License requirements: None.
decksTicColor() - Method in interface nxopen.annotations.FrameBarPreferences: Returns the tic color
License requirements: None.
decksTicDisplay() - Method in interface nxopen.annotations.FrameBarPreferences: Returns the decks tic display type
License requirements: None.
decksTicFont() - Method in interface nxopen.annotations.FrameBarPreferences: Returns the tic font
License requirements: None.
decksTicLength() - Method in interface nxopen.annotations.FrameBarPreferences: Returns the tic length
License requirements: None.
decksTicWidth() - Method in interface nxopen.annotations.FrameBarPreferences: Returns the tic width
License requirements: None.
deckThickness() - Method in interface nxopen.die.DieShoeBuilder: Returns the deck thickness
License requirements: None.
deckThickness() - Method in interface nxopen.die.DrawDiePunchSectionBuilder: Returns the deck thickness of the draw die punch casting.
deckThickness() - Method in interface nxopen.die.KeywayBuilder: Returns the expression for the deck thickness
License requirements: None.
deckThickness() - Method in interface nxopen.tooling.DieDesDrawDieBuilder: Returns the deck thickness, which is used for define the deck thickness of the die.
deckThickness() - Method in interface nxopen.tooling.DieDesDrawPunchBuilder: Returns the deck thickness, which is used for define the deck thickness of the punch.
DECLARE_VARIABLE - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.CommandTypes: Enter a statement declaring a variable
decode(String, String, int) - Method in interface nxopen.uf.UFClone: Refer to UF_CLONE_decode for documentation.
decodePartFileName(String) - Method in interface nxopen.uf.UFUgmgr: Refer to UF_UGMGR_decode_part_file_name for documentation.
DecodePartFileNameData() - Constructor for class nxopen.uf.UFUgmgr.DecodePartFileNameData
decomposeHandle(String) - Method in interface nxopen.uf.UFTag: Refer to UF_TAG_decompose_handle for documentation.
DecomposeHandleData() - Constructor for class nxopen.uf.UFTag.DecomposeHandleData
DECOMPOSITION - Static variable in class nxopen.routing.InterfaceTerminalRelationshipBase.RelationType
decPlaces - Variable in class nxopen.uf.UFSket.AskLegacyPreferencesData
decPlaces - Variable in class nxopen.uf.UFSket.AskPreferencesData
DECREASE - Static variable in class nxopen.motion.JointFrictionAdams.FrictionOverlapDelta
DECREASE - Static variable in class nxopen.motion.JointFrictionRecurDyn.FrictionOverlapDelta
DECREMENT - Static variable in class nxopen.mechatronics.GanttOperationParameterBuilder.OperatorOption: Decrement operator '-='
deEmphasisBlendColor() - Method in interface nxopen.preferences.PartVisualizationColorSetting: Deprecated.
Deprecated in NX8.5.0. Use Preferences.PartVisualizationEmphasis#getWireframeBlendOptions instead.
deEmphasisBlendPercentage() - Method in interface nxopen.preferences.PartVisualizationColorSetting: Deprecated.
Deprecated in NX8.5.0. Use Preferences.PartVisualizationEmphasis#getWireframeBlendOptions instead.
DEEP_AQUA_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DEEP_AZURE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DEEP_BLUE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DEEP_BROWN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DEEP_CARROT_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DEEP_COBALT_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DEEP_CORAL_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DEEP_CORNFLOWER_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DEEP_CRIMSON_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DEEP_CYAN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DEEP_EMERALD_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DEEP_FOREST_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DEEP_FUCHSIA_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DEEP_GOLD_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DEEP_GREEN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DEEP_ICE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DEEP_INDIGO_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DEEP_KHAKI_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DEEP_LAVENDER_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DEEP_LEAF_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DEEP_LEMON_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DEEP_LIME_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DEEP_MAGENTA_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DEEP_MAROON_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DEEP_MIDNIGHT_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DEEP_MINT_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DEEP_MOSS_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DEEP_OLIVE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DEEP_ORANGE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DEEP_PEACH_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DEEP_PINE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DEEP_PINK_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DEEP_PISTACHIO_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DEEP_PLUM_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DEEP_PURPLE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DEEP_RED_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DEEP_ROYAL_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DEEP_SALMON_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DEEP_SEA_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DEEP_SKY_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DEEP_SPRING_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DEEP_STEEL_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DEEP_STONE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DEEP_TAN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DEEP_TEAL_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DEEP_TURQUOISE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DEEP_UMBER_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DEEP_VIOLET_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
DEEP_YELLOW_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
defAssociative() - Method in interface nxopen.tooling.ProfileSplitBuilder: Returns the associative flag
License requirements: None.
DEFAULT - Static variable in class nxopen.assemblies.ClearanceAnalysisBuilder.ClearanceZoneSource
DEFAULT - Static variable in class nxopen.assemblies.ComponentAssembly.CheckinCheckoutOption: Check In or Check Out option is determined by the system using whatever option is appropriate for the selected object type.
DEFAULT - Static variable in class nxopen.cae.FreeBodyResultsBuilder.OutputUnits: same as Solver Deck Unit
DEFAULT - Static variable in class nxopen.cae.LaminateDrapingDataBuilder.SecondaryVectorType: default
DEFAULT - Static variable in class nxopen.cae.ModelDisplayBuilder.ElmClrBasis: Default
DEFAULT - Static variable in class nxopen.cam.InspectionPathBuilder.InspectModeType: Default from method
DEFAULT - Static variable in class nxopen.die.AddendumSectionBuilder.SectionOrientationType: Orient perpendicular to tangency curve.
DEFAULT - Static variable in class nxopen.display.ImageBaseBuilder.InsertionPoint: default insertion point type
DEFAULT - Static variable in class nxopen.display.TrueShadingBuilder.EnvironmentMapType: No reflection map
DEFAULT - Static variable in class nxopen.features.shipdesign.ShipDesignPreferencesBuilder.ColorType: default type
DEFAULT - Static variable in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Font: Default Font.
DEFAULT - Static variable in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Width: Default Width
DEFAULT - Static variable in class nxopen.JtCreator.RefsetOption: DEFAULT
DEFAULT - Static variable in class nxopen.LineWidthOption: Default width.
DEFAULT - Static variable in class nxopen.pdm.PartBuilder.Operation: Default UG/Manager part selection dialog
DEFAULT - Static variable in class nxopen.pdm.PartOperationCopyBuilder.OperationSubType: Save As dialog
DEFAULT - Static variable in class nxopen.tooling.InitProjBuilder.ProjTempOption: Indicates that the project template is 'Default'.
DEFAULT - Static variable in class nxopen.tooling.InitProjectBuilder.ConfigurationId: Default configuration
DEFAULT - Static variable in class nxopen.uf.UFParam.Status
DEFAULT - Static variable in class nxopen.uistyler.Attachment.AttachType: Default type
DEFAULT - Static variable in class nxopen.weld.DatumCommonBuilder.CreationDirectionMethods: Use the default construction method
DEFAULT - Static variable in class nxopen.weld.DatumCommonBuilder.CustomTypes: A datum surface or pin specified in the customer defaults by the Default type.
DEFAULT - Static variable in class nxopen.weld.FilletBuilder.EnumConstructionMethod
DEFAULT_ACTION - Static variable in class nxopen.uf.UFClone.Action
DEFAULT_COLOR - Static variable in class nxopen.preferences.PartObject.ColorSelection: Default Color
DEFAULT_DISPLAY_TYPE - Static variable in class nxopen.uf.UFGdt.LimitsAndFitsDisplayType
DEFAULT_FILE_FONTS - Static variable in class nxopen.uf.UFCgm.Fonts
DEFAULT_FILE_WIDTHS - Static variable in class nxopen.uf.UFCgm.Widths
DEFAULT_LIGHTS - Static variable in class nxopen.display.TrueShadingBuilder.SHEDLightCollectionType: Scene lighting collection 1
DEFAULT_NAMING - Static variable in class nxopen.uf.UFClone.NamingTechnique
DEFAULT_ROUTE - Static variable in class nxopen.routing.electrical.ElectricalStockDevice.RouteTypes
DEFAULT_STOCK - Static variable in class nxopen.routing.PathStockBuilder.AssignMethod: Default Stock.
DEFAULT_TIME - Static variable in class nxopen.motion.GraphBuilder.XAxisTypeChoices: Time
DEFAULT_UNIT - Static variable in class nxopen.cae.SolidPropertyCheckBuilder.UserUnit: Load unit = same as system default unit
DEFAULT_UV - Static variable in class nxopen.display.CgfxMattexBuilder.TextureSpace: Deprecated.

scale 1, 0 offset uv texture space
DEFAULT_VIEW - Static variable in class nxopen.tooling.AssemblyDrawingBuilder.ViewOptionValue
defaultAction - Variable in class nxopen.uf.UFClone.GenLogOpts
defaultArcNamePrefix() - Method in interface nxopen.preferences.SessionSketch: Returns the default arc name prefix
License requirements: None.
defaultBaf - Variable in class nxopen.uf.UFSmd.GenPrefs
defaultBodyRulesAsString() - Method in interface nxopen.blockstyler.BodyCollector: Returns the DefaultBodyRules as string
License requirements: None.
defaultBoolean() - Method in interface nxopen.AttributeTemplatesBuilder: Returns the default boolean.
defaultColumnWidth() - Method in interface nxopen.blockstyler.SetList: Returns the DefaultColumnWidth
License requirements: None.
defaultConicNamePrefix() - Method in interface nxopen.preferences.SessionSketch: Returns the default conic name prefix
License requirements: None.
defaultCurveRulesAsString() - Method in interface nxopen.blockstyler.CurveCollector: Returns the DefaultCurveRules as string
License requirements: None.
defaultCurveRulesAsString() - Method in interface nxopen.blockstyler.SectionBuilder: Returns the DefaultCurveRules as string
License requirements: None.
defaultCurveRulesAsString() - Method in interface nxopen.blockstyler.SuperPoint: Returns the DefaultCurveRules as string
License requirements: None.
defaultCurveRulesAsString() - Method in interface nxopen.blockstyler.SuperSection: Returns the DefaultCurveRules as string
License requirements: None.
defaultDate() - Method in interface nxopen.AttributeTemplatesBuilder: Returns the default date.
defaultDestinationFolder() - Method in interface nxopen.pdm.ObjectCreateBuilder: Returns the default destination folder string for the object being created.
defaultDestinationFolder() - Method in interface nxopen.pdm.PartOperationBuilder: Returns the default destination folder string for the part being created .
defaultDraw() - Method in interface nxopen.die.AddendumSectionBuilder: Create default draw vector based upon the input product faces.
defaultDraw() - Method in interface nxopen.die.TrimLineDevelopmentBuilder: Creates a default draw vector by finding the least squares plane of the formed faces
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
defaultEdgeContinuity() - Method in interface nxopen.features.FillHoleBuilder: Returns the default continuity of edges.
defaultElbowNode() - Method in interface nxopen.preferences.RoutingPart: Returns the node in the part library to use for searching for the default elbow to place during create path.
defaultFaceRulesAsString() - Method in interface nxopen.blockstyler.FaceCollector: Returns the DefaultFaceRules as string
License requirements: None.
defaultInteger() - Method in interface nxopen.AttributeTemplatesBuilder: Returns the default integer.
defaultJumperLength() - Method in interface nxopen.preferences.RoutingElectrical: Returns the default length of a jumper wire.
defaultLayupOffset() - Method in interface nxopen.cae.LaminateGlobalLayupMgr: Returns the default layup offset
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
defaultLineNamePrefix() - Method in interface nxopen.preferences.SessionSketch: Returns the default line name prefix
License requirements: None.
defaultMaterialOrientation() - Method in interface nxopen.cae.LaminateGlobalLayupMgr: Returns the default material orientation
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
defaultMaterialTemperature() - Method in interface nxopen.cae.DurabilityEventOverridesBuilder: Returns the default material temperature.
defaultNaming - Variable in class nxopen.uf.UFClone.GenLogOpts
defaultNumber() - Method in interface nxopen.AttributeTemplatesBuilder: Returns the default number.
defaultOperationType() - Method in interface nxopen.cam.InspectionMethodBuilder: Returns the default inspection operation type
License requirements: None.
defaultPlane() - Method in interface nxopen.annotations.PmiPreferences: Returns the default annotation plane for PMI symbols
License requirements: None.
defaultRefSets - Variable in class nxopen.uf.UFAssem.AskDefaultRefSetsData
defaultRegionStartType() - Method in interface nxopen.cam.NcmSubopBuilder: Returns the region start type
License requirements: None.
defaultRpoMenu(Tag) - Method in interface nxopen.uf.UFModlUi: Refer to UF_MODL_default_rpo_menu for documentation.
DEFAULTS - Static variable in class nxopen.routing.TransformPathBuilder.CopyAttributes: Copy Attributes as per defaults.
defaultSketchNamePrefix() - Method in interface nxopen.preferences.SessionSketch: Returns the default sketch name prefix
License requirements: None.
defaultSplineNamePrefix() - Method in interface nxopen.preferences.SessionSketch: Returns the default spline name prefix
License requirements: None.
DefaultStandardTextFontData() - Constructor for class nxopen.preferences.VisualizationFonts.DefaultStandardTextFontData
DefaultStockData() - Constructor for class nxopen.preferences.RoutingStock.DefaultStockData
defaultStockStyle() - Method in interface nxopen.preferences.RoutingStock: Returns the default stock style
License requirements: routing_base ("Routing Basic")
.
defaultString() - Method in interface nxopen.AttributeTemplatesBuilder: Returns the default string.
defaultString - Variable in class nxopen.uf.UFPlist.ColPrefs
defaultTemperatureOption() - Method in interface nxopen.cae.SolidPropertyCheckBuilder: Returns the output mass split option option
License requirements: None.
defaultThickness() - Method in interface nxopen.features.ShellBuilder: Returns the default thickness for the shelled body.
defaultThicknessFlip() - Method in interface nxopen.features.ShellBuilder: Returns the flip direction option for default thickness.
defaultValidationOpts - Variable in class nxopen.uf.UFClone.GenLogOpts
defaultValue() - Method in interface nxopen.fields.FieldVariable: Returns the variable's default value which is value used when evaluating a field and no value is specified
License requirements: None.
defaultVertexNamePrefix() - Method in interface nxopen.preferences.SessionSketch: Returns the default vertex name prefix
License requirements: None.
deferCurveUpdate() - Method in interface nxopen.display.DynamicSectionBuilder: Returns the defer curve update property.
deferCuttingStatus() - Method in interface nxopen.cam.PlanarOperationBuilder: Returns the defer cutting status value
License requirements: None.
DEFERRED - Static variable in class nxopen.cam.CutRegionsBuilder.CutRegionsStatusTypes: Deferred
deferredDelayed - Variable in class nxopen.PartDelayedUpdateStatus.DelayStatusInfo: The part is deferred delayed.
DEFEVAL - Static variable in class nxopen.uf.UFKf.Type
defFeat - Variable in class nxopen.uf.UFGdt.DatumIdentifier
defFeat - Variable in class nxopen.uf.UFGdt.MultipleDatum
DEFINE_CSYS - Static variable in class nxopen.features.shipdesign.InverseBendingLinesBuilder.ReferencePlaneType: User defined plane.
DEFINE_HOME_POINT - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.CommandTypes: Enter a statement defining the home point
DEFINE_PCSFROM_ACTUAL_DEVIATIONS - Static variable in class nxopen.cam.InspectionAlignmentBuilder.AlignTypes: Locate PCS from Features
DEFINE_PCSFROM_DATUMS - Static variable in class nxopen.cam.InspectionAlignmentBuilder.AlignTypes: Define the PCS from datums
DEFINE_PRE_BENDS - Static variable in class nxopen.tooling.DirectUnfoldBuilder.Types: the direct unfold type of define pre-bends
defineBases() - Method in interface nxopen.die.DieAssistantFlangeProfile: TODO: fill in a description for this
License requirements: ug_die_design ("Die Design")
.
defineBases() - Method in interface nxopen.die.DieAssistantTrimProfile: TODO: fill in a description for this
License requirements: ug_die_design ("Die Design")
.
DefineBoundary() - Constructor for class nxopen.uf.UFDraw.DefineBoundary
DefineBoundary(Tag) - Constructor for class nxopen.uf.UFDraw.DefineBoundary
defineBoundByObjects(Tag, int, Tag[]) - Method in interface nxopen.uf.UFDraw: Refer to UF_DRAW_define_bound_by_objects for documentation.
defineByPathOption() - Method in interface nxopen.cae.PostGraphAlongPathBuilder: Returns a value indicating whether the x axis is define by a path ID.
defineByViewOrHolesEnum() - Method in interface nxopen.tooling.HoleManufacturingNoteBuilder: Returns the selection type enumeration
License requirements: None.
DefineCamBuilder - Interface in nxopen.tooling: Represents a DefineCamBuilder to create different types of cam objects, which are used for kinematic motion
To create a new instance of this class, use ProgressiveDieManager.createDefineCamBuilder()
Default values.
DefineCamBuilder.Types - Class in nxopen.tooling: Specifies the cam types
DefineComponentAnchorPointBuilder - Interface in nxopen.layout2d: Represents a Builder for Define Component Anchor Point functionality which will define the anchor point location of a 2D Component instance
To create a new instance of this class, use ComponentCollection.createDefineComponentAnchorPointBuilder()

Created in NX10.0.0
DefineComponentBuilder - Interface in nxopen.layout2d: Represents a Builder for Define 2D component functionality which will define a 2D Component and stores its definition in the Reuse Library
To create a new instance of this class, use ComponentCollection.createDefineComponentBuilder(nxopen.layout2d.Component)
Default values.
defineConnectVector() - Method in interface nxopen.tooling.CoolingConnectBuilder: Returns the value which specifies whether to define the vector of the connect channel or not.
DEFINED - Static variable in class nxopen.assemblies.ClearanceAnalysisBuilder.ClearanceZoneSource
defined - Variable in class nxopen.cae.CorrelAlignmentBuilder.ReferencePt
DEFINED - Static variable in class nxopen.drawings.HingeLineBuilder.Hingeline: The option for selecting hinge line using vector construction tools
DEFINED - Static variable in class nxopen.JtCreator.TessellationOption: defined level
DEFINED - Static variable in class nxopen.ListCreator.TessellationOption: defined level
DefinedAttributesExpressionsData() - Constructor for class nxopen.tooling.SpreadsheetData.DefinedAttributesExpressionsData
definedBy() - Method in interface nxopen.die.SpringbackCompensationBuilder: Returns the type of data that will be used to define the feature.
defineField(Tag, int, String, String, String, UFPlist.FieldFormat, int, int, int) - Method in interface nxopen.uf.UFPlist: Deprecated.
The equivalent Open C method has retired
DEFINEIN_NX - Static variable in class nxopen.pdm.ConfigurationContextBuilder.ConfigurationDetail
defineKinematicChains() - Method in interface nxopen.sim.KinematicConfigurator: Creates a builder for a kinematic chain configurator
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
DefineLifterBuilder - Interface in nxopen.tooling: Represents a DefineLifterBuilder to create different types of lifter objects, which are used for kinematic motion.
DefineLifterBuilder.Types - Class in nxopen.tooling: Specifies the lifter types
defineNeutralFactor() - Method in interface nxopen.tooling.BendOperationBuilder: Returns the define neutral factor builder which contains new neutral factor, part material and bend developed length
License requirements: None.
defineNeutralFactor() - Method in interface nxopen.tooling.DirectUnfoldBuilder: Returns the define neutral factor builder which contains new neutral factor, part material and bend developed length
License requirements: None.
defineNeutralFactor() - Method in interface nxopen.tooling.UniversalUnformBuilder: Returns the define neutral factor builder which contains new neutral factor, part material and bend developed length
License requirements: None.
DefineNeutralFactorBuilder - Interface in nxopen.tooling: Represeents a DefineNeutralFactorBuilder to define neutral factor according to material and formula in the spreadsheet table.
DefineNeutralFactorBuilder.FormulaOptions - Class in nxopen.tooling: Specifies the formula used to calculate the neutral factor value
DEFINEOR_LOAD_CONTEXT - Static variable in class nxopen.pdm.ConfigurationContextBuilder.ConfigContextType
definePalette() - Method in interface nxopen.PlotColorsWidthsBuilder: Initialize the Color Palette.
definePalette() - Method in interface nxopen.PrintPDFBuilder: Initialize the Color Palette.
DefineRunBuilder - Interface in nxopen.routing: Builder Class for DefineRun Object
To create a new instance of this class, use RouteManager.createDefineRunBuilder(nxopen.routing.Run)

Created in NX8.5.0
defineSharedBodyInput() - Method in interface nxopen.geometricutilities.PartModuleInputBuilder: Returns the shared body inputs option.
defineSpringback() - Method in interface nxopen.tooling.DieEngStampingOutputBuilder: The define springback method
License requirements: die_engineering ("DIE ENGINEERING")
.
defineStartPoint() - Method in interface nxopen.tooling.CoolingConnectBuilder: Returns the value which specifies whether to define the start point or not.
defineSymPlyidRange(int, int) - Method in interface nxopen.cae.Laminate: Defines the range of id to be used for symmetric and repeated plies.
defineSymPlyidRange(int, int) - Method in interface nxopen.cae.LaminateGlobalLayup: Defines the range of id to be used for symmetric and repeated plies.
DefineTitleBlockBuilder - Interface in nxopen.annotations: Represents a DefineTitleBlockBuilder .
defineValue - Variable in class nxopen.uf.UFModl.UdfsExp
defineViewAutoRect(Tag) - Method in interface nxopen.uf.UFDraw: Refer to UF_DRAW_define_view_auto_rect for documentation.
defineViewBoundary(Tag, int, UFDraw.DefineBoundary[]) - Method in interface nxopen.uf.UFDraw: Refer to UF_DRAW_define_view_boundary for documentation.
defineViewBoundary1(Tag, int, UFDraw.DefineBoundary[]) - Method in interface nxopen.uf.UFDraw: Refer to UF_DRAW_define_view_boundary1 for documentation.
defineViewManualRect(Tag, double[]) - Method in interface nxopen.uf.UFDraw: Refer to UF_DRAW_define_view_manual_rect for documentation.
defineWidths() - Method in interface nxopen.PlotColorsWidthsBuilder: Initialize the Width dialog.
defineWidths() - Method in interface nxopen.PrintPDFBuilder: Initialize the Width dialog.
DEFINING - Static variable in class nxopen.InferSnapType.SnapType: Snap point at defining
DEFINING_POINTS - Static variable in class nxopen.features.PointSetBuilder.SplinePointsType: Points will be created at spline defining points.
definingCurve - Variable in class nxopen.uf.UFCurve.AskProjCurveParentsData
definingCurve - Variable in class nxopen.uf.UFCurve.AskWrapCurveParentsData
DefiningData() - Constructor for class nxopen.FaceAllBlendRule.DefiningData
DefiningData() - Constructor for class nxopen.FaceBossPocketFacesRule.DefiningData
DefiningData() - Constructor for class nxopen.FaceConnectedBlendRule.DefiningData
DefiningData() - Constructor for class nxopen.FaceMergedRibFacesRule.DefiningData
DefiningData() - Constructor for class nxopen.FaceRibFacesRule.DefiningData
DefiningData() - Constructor for class nxopen.FaceSlotFacesRule.DefiningData
definingFace - Variable in class nxopen.uf.UFCurve.AskWrapCurveParentsData
definingFace1 - Variable in class nxopen.uf.UFModeling.AskFacepairParmsData
definingFace2 - Variable in class nxopen.uf.UFModeling.AskFacepairParmsData
definingFeature - Variable in class nxopen.uf.UFCurve.AskProjCurveParentsData
definingNxObject() - Method in interface nxopen.routing.ItemDefinition: Returns the NX object associated with the item definition object.
definingObject - Variable in class nxopen.uf.UFCurve.SectionCurveAskParentsData
definingObjectsAdded() - Method in interface nxopen.assemblies.CreateNewComponentBuilder: Returns the defining objects added toggle
License requirements: None.
definingPlane - Variable in class nxopen.uf.UFCurve.AskWrapCurveParentsData
definingPoint() - Method in interface nxopen.routing.OverstockBuilder: Returns the defining point for OverstockBuilder.ApplicationType.POINT_AND_LENGTH method.
definingPoints - Variable in class nxopen.uf.UFDraw.ViewBoundary
definingTarget - Variable in class nxopen.uf.UFCurve.AskProjCurveParentsData
definition() - Method in interface nxopen.cae.optimization.TBSGroupDefinition: Returns the definition type
License requirements: None.
definition() - Method in interface nxopen.features.UserDefinedFeatureCreateEvent: Returns the user defined feature definition
License requirements: None.
definition() - Method in interface nxopen.Layout: Returns the definition of the layout.
definition() - Method in interface nxopen.routing.OverstockApplication: Returns the method used to define the overstock application.
definition - Variable in class nxopen.uf.UFGdt.DrfReference
definition - Variable in class nxopen.uf.UFMotion.Function
definitionCurves() - Method in interface nxopen.features.shipdesign.SeamBuilder: Returns the curves selected or sketched that will be projected onto the ship structure to create the seam.
definitionEquallySpacedCurve1() - Method in interface nxopen.features.shipdesign.SeamBuilder: Returns the first curve that will be used as a boundary for the equally spaced seams.
definitionEquallySpacedCurve2() - Method in interface nxopen.features.shipdesign.SeamBuilder: Returns the second curve that will be used as a boundary for the equally spaced seams.
definitionEquallySpacedNumber() - Method in interface nxopen.features.shipdesign.SeamBuilder: Returns the number of seams to create between the two boundary curves selected.
definitionEquallySpacedPlaneList() - Method in interface nxopen.features.shipdesign.SeamBuilder: Returns the list of planes defined that will be used to specify key points to create the seam.
definitionMethod() - Method in interface nxopen.features.shipdesign.SeamBuilder: Returns the method used to define the seam locations.
definitionMethodOption() - Method in interface nxopen.validate.RequirementBuilder: Returns the definition method option
License requirements: None.
definitionObjects() - Method in interface nxopen.features.shipdesign.SeamBuilder: Returns the sheet bodies or curves representing ship structure, that will be intersected with or projected onto the ship structure to create the seam.
definitionPlaneList() - Method in interface nxopen.features.shipdesign.SeamBuilder: Returns the list of planes defined that will be intersected with the ship structure to create the seam.
definitionProjectionDirection() - Method in interface nxopen.features.shipdesign.SeamBuilder: Returns the direction to project curves to the ship structure to define seams.
definitionRectangularCorner() - Method in interface nxopen.features.shipdesign.SeamBuilder: Returns the starting corner of the rectangular grid that defines the seams.
definitionRectangularLength() - Method in interface nxopen.features.shipdesign.SeamBuilder: Returns the size of each rectangle of the grid in the length direction.
definitionRectangularLengthDirection() - Method in interface nxopen.features.shipdesign.SeamBuilder: Returns the length direction of the rectangular grid that defines the seams.
definitionRectangularPlane() - Method in interface nxopen.features.shipdesign.SeamBuilder: Returns the plane of the rectangular grid that defines the seams.
definitionRectangularWidth() - Method in interface nxopen.features.shipdesign.SeamBuilder: Returns the size of each rectangle of the grid perpendicular to the length direction.
definitiontype - Variable in class nxopen.cam.MillingTrackpointBuilder.TrackPointData: the definition type
defNum() - Method in interface nxopen.tooling.ElectrodeCopyBuilder: Returns the number of transform
License requirements: None.
DEFORM - Static variable in class nxopen.features.sheetmetal.SheetmetalFaceType
deform() - Method in interface nxopen.geometricutilities.CurveShapingBuilder: Deforms curves based on active points
License requirements: studio_free_form ("STUDIO FREE FORM")
.
DEFORM_NEGATIVE - Static variable in class nxopen.uf.UFModl.FeatureSigns
DEFORM_POSITIVE - Static variable in class nxopen.uf.UFModl.FeatureSigns
deformationDirectionMethod() - Method in interface nxopen.features.GlobalShapingBuilder: Returns the deformation direction method
License requirements: None.
deformationDirectionReverse() - Method in interface nxopen.features.GlobalShapingBuilder: Returns the deformation direction reverse
License requirements: None.
deformationDirectionVector() - Method in interface nxopen.features.GlobalShapingBuilder: Returns the deformation direction vector
License requirements: None.
deformationFactor() - Method in interface nxopen.die.SpringbackCompensationBuilder: Returns the deformation factor determines how much of the calculated deformation is applied to the result body.
DeformationParameters - Interface in nxopen.cae: This class is worked as a packet of information that can be be used to deform Post objects.
DeformationParameters() - Constructor for class nxopen.cae.Result.DeformationParameters: Deprecated.
DeformationParameters(int, int, Result.Type, Result.Complex, double, Result.DeformationScale, double, double) - Constructor for class nxopen.cae.Result.DeformationParameters: Deprecated.

Constructor for the DeformationParameters object.
deformationScale - Variable in class nxopen.cae.Result.DeformationParameters: Deprecated.
deformationType() - Method in interface nxopen.cae.DeformationParameters: Returns the type of scale used for deforming the model
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
deformationType() - Method in interface nxopen.features.GlobalShapingBuilder: Returns the deformation type
License requirements: None.
deformBody() - Method in interface nxopen.facet.SewFacetBodyBuilder: Returns the deform body to be sewed
License requirements: None.
DeformData() - Constructor for class nxopen.uf.UFAssem.DeformData
DeformData(Tag, UFModl.UdfsDefData, String) - Constructor for class nxopen.uf.UFAssem.DeformData
deformData - Variable in class nxopen.uf.UFAssem.DeformPartData
deformDistance() - Method in interface nxopen.facet.SewFacetBodyBuilder: Returns the distance to control the deform area on the deform body
License requirements: None.
DEFORMED - Static variable in class nxopen.routing.StockUse: Stock has been deformed using the "Deform Component" functionality.
DeformedDefinitionData() - Constructor for class nxopen.uf.UFAssem.DeformedDefinitionData
DeformedDefinitionData(Tag, Tag[], String[], int, Tag[], String[], int, String) - Constructor for class nxopen.uf.UFAssem.DeformedDefinitionData
deformedFeatureTag - Variable in class nxopen.uf.UFAssem.AssemblyDeformPartData
deformedScale - Variable in class nxopen.uf.UFSf.MeshVisuals
deformPart(UFAssem.AssemblyDeformPartData) - Method in interface nxopen.uf.UFAssem: Refer to UF_ASSEM_deform_part for documentation.
DeformPartData() - Constructor for class nxopen.uf.UFAssem.DeformPartData
DeformPartWarnings() - Constructor for class nxopen.uf.UFAssem.DeformPartWarnings
DeformPartWarnings(int, Tag[], int[], String[]) - Constructor for class nxopen.uf.UFAssem.DeformPartWarnings
deformWarnings - Variable in class nxopen.uf.UFAssem.DeformPartData
defStationNum() - Method in interface nxopen.tooling.ScrapDesignBuilder: Returns the defined station number, according to it scraps can be laid out automatically in strip
License requirements: None.
defVector() - Method in interface nxopen.tooling.ProfileSplitBuilder: Returns the extruded vector to return
License requirements: None.
DEG0 - Static variable in class nxopen.cam.GrooveToolBuilder.HolderStyles: 0 degrees
DEG45 - Static variable in class nxopen.cam.GrooveToolBuilder.HolderStyles: 45 degrees
DEG90 - Static variable in class nxopen.cam.GrooveToolBuilder.HolderStyles: 90 degrees
DEG_MIN_SEC - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.AngleFormat: Degrees/Minutes/Seconds
DEGENERATE_GEOMETRY - Static variable in class nxopen.uf.UFConstants
DEGENERATE_SPLINE - Static variable in class nxopen.uf.UFConstants
DEGENERATE_SURFACE - Static variable in class nxopen.uf.UFConstants
degenerateFacets() - Method in interface nxopen.facet.CleanupFacetBodyBuilder: Returns the degenerate facets option
License requirements: None.
degofType - Variable in class nxopen.uf.UFSim.AskDegofData
DEGRA - Static variable in class nxopen.uf.UFConstants
degree() - Method in interface nxopen.die.SpringbackCompensationBuilder: Returns the polynomial degree (one unit less than the order).
degree() - Method in interface nxopen.features.FitCurveBuilder: Returns the degree
License requirements: None.
degree() - Method in interface nxopen.features.RapidSurfaceBuilder: Returns the degree
License requirements: studio_free_form ("STUDIO FREE FORM")
.
degree() - Method in interface nxopen.features.StudioSplineBuilder: Deprecated.
Deprecated in NX8.0.0. Use StudioSplineBuilderEx instead.
degree() - Method in interface nxopen.features.StudioSplineBuilderEx: Returns the degree
License requirements: None.
degree() - Method in interface nxopen.geometricutilities.CurveFitData: Returns the fitting degree
License requirements: None.
degree() - Method in interface nxopen.geometricutilities.DegreesAndSegmentsOrPatchesBuilder: Returns the degree
License requirements: studio_free_form ("STUDIO FREE FORM")
.
degree() - Method in interface nxopen.geometricutilities.Rebuild: Returns the degree when rebuild type is none.
degree() - Method in interface nxopen.SketchOffsetBuilder: Returns the degree for approximating offset spline
License requirements: None.
degree - Variable in class nxopen.uf.UFCurve.AskSplineThruPtsData
degree - Variable in class nxopen.uf.UFSo.SplineData
DEGREE0 - Static variable in class nxopen.PlotBuilder.RotationOption: 0 degree rotation
DEGREE180 - Static variable in class nxopen.PlotBuilder.RotationOption: 180 degree rotation
DEGREE270 - Static variable in class nxopen.PlotBuilder.RotationOption: 270 degree rotation
DEGREE90 - Static variable in class nxopen.PlotBuilder.RotationOption: 90 degree rotation
DEGREE_AND_SEGMENTS - Static variable in class nxopen.features.FitCurveBuilder.FittingParametersOptions: Fit to degree and segments
DEGREE_AND_SEGMENTS - Static variable in class nxopen.geometricutilities.CurveFitData.Method: Degree and Segments
DEGREE_AND_TOLERANCE - Static variable in class nxopen.features.FitCurveBuilder.FittingParametersOptions: Fit to degree and tolerance
DEGREE_AND_TOLERANCE - Static variable in class nxopen.geometricutilities.CurveFitData.Method: Degree and Tolerance
DEGREE_PATCHES - Static variable in class nxopen.geometricutilities.RefitControlBuilder.RefitControlMethod: Degree and patches
DEGREE_TOLERANCE - Static variable in class nxopen.geometricutilities.RefitControlBuilder.RefitControlMethod: Degree and tolerance
DEGREE_UNITS - Static variable in class nxopen.uf.UFMotion.AngularUnitsType
degreePatches() - Method in interface nxopen.features.MatchEdgeBuilder: Returns the degree and patches
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
DEGREES - Static variable in class nxopen.annotations.TableCellStyleBuilder.CellFormatTypes: Radians
DEGREES - Static variable in class nxopen.annotations.TableCellStyleBuilder.FormatType: Deprecated.

Radians
DEGREES - Static variable in class nxopen.cam.InspectionMethodBuilder.UVModeTypes: Angle from start and end
degrees() - Method in interface nxopen.features.AestheticFaceBlendBuilder: Returns the degrees
License requirements: None.
DEGREES_DEGREE_UNITS - Static variable in class nxopen.annotations.TableCellStyleBuilder.CellFormatTypes: Degrees
DEGREES_DEGREE_UNITS - Static variable in class nxopen.annotations.TableCellStyleBuilder.FormatType: Deprecated.

Degrees
DEGREES_MINUTES - Static variable in class nxopen.annotations.AngularDimensionFormat: Specifies degrees minutes format
DEGREES_MINUTES - Static variable in class nxopen.preferences.AngleFormat: Degrees minutes format, e.g. 30 degrees 30"
DEGREES_MINUTES - Static variable in class nxopen.uf.UFDrf.AngularUnits
DEGREES_MINUTES_SECONDS - Static variable in class nxopen.annotations.AngularDimensionFormat: Specifies degrees minutes seconds format
DEGREES_MINUTES_SECONDS - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.AngularUnitsOptions: Use Degrees:Minutes:Seconds
DEGREES_MINUTES_SECONDS - Static variable in class nxopen.preferences.AngleFormat: Degrees minutes seconds format, e.g. 30 degrees 30"30'
DEGREES_MINUTES_SECONDS - Static variable in class nxopen.uf.UFDrf.AngularUnits
DEGREES_OF_FREEDOM_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption: The freedom degree of the component
DEGREES_RADIAN_UNITS - Static variable in class nxopen.annotations.TableCellStyleBuilder.CellFormatTypes: Radians
DEGREES_RADIAN_UNITS - Static variable in class nxopen.annotations.TableCellStyleBuilder.FormatType: Deprecated.

Radians
degreesAndPatches() - Method in interface nxopen.geometricutilities.MovePoleBuilder: Returns the degrees and patches
License requirements: None.
degreesAndSegmentsOrPatches() - Method in interface nxopen.features.StudioXformBuilder: Deprecated.
Deprecated in NX8.5.0. Use StudioXformBuilderEx instead.
degreesAndSegmentsOrPatches() - Method in interface nxopen.features.StudioXformBuilderEx: Returns the degrees and segments or patches
License requirements: None.
degreesAndSegmentsOrPatches() - Method in interface nxopen.geometricutilities.RefitControlBuilder: Returns the refit degrees and segments or patches
License requirements: studio_free_form ("STUDIO FREE FORM")
.
DegreesAndSegmentsOrPatchesBuilder - Interface in nxopen.geometricutilities: the DegreesAndSegmentsOrPatches builder .
DegreesOfFreedom - Class in nxopen.assemblies: Structure used to report the Degrees of Freedom of a component.
DegreesOfFreedom() - Constructor for class nxopen.assemblies.DegreesOfFreedom
DegreesOfFreedom(DegreesOfFreedomResult, int, int, int, int, DegreesOfFreedomStatus, Point3d, DegreesOfFreedomStatus, Vector3d, DegreesOfFreedomStatus, Point3d, DegreesOfFreedomStatus, Vector3d, DegreesOfFreedomStatus, Vector3d, DegreesOfFreedomStatus, Vector3d) - Constructor for class nxopen.assemblies.DegreesOfFreedom: Constructor for the DegreesOfFreedom object.
DegreesOfFreedomResult - Class in nxopen.assemblies: The overall result of the degrees of freedom calculation reported in DegreesOfFreedom .
DegreesOfFreedomStatus - Class in nxopen.assemblies: The status of a rotation point, rotation axis or translation direction reported in DegreesOfFreedom .
degreeType() - Method in interface nxopen.geometricutilities.Rebuild: Returns the degree type when rebuild type is none.
DEGRESSION - Static variable in class nxopen.cam.StepoverBuilder.StepoverTypes: Degression
DELAUNAY2D_ACCURATE - Static variable in class nxopen.fields.FieldEvaluator.InterpolationEnum: Triangulates the independent values and uses the bounding triangle, sacrifices speed for accuracy
DELAUNAY2D_FAST - Static variable in class nxopen.fields.FieldEvaluator.InterpolationEnum: Triangulates the independent values and uses the bounding triangle, sacrifices accuracy for speed
DELAUNAY2D_MEDIUM - Static variable in class nxopen.fields.FieldEvaluator.InterpolationEnum: Triangulates the independent values and uses the bounding triangle, compromise between accuracy and speed
DELAUNAY3D_ACCURATE - Static variable in class nxopen.fields.FieldEvaluator.InterpolationEnum: Creates Tetrahedrals using the independent values and uses the bounding tetrahedron, sacrifices speed for accuracy
DELAUNAY3D_FAST - Static variable in class nxopen.fields.FieldEvaluator.InterpolationEnum: Creates Tetrahedrals using the independent values and uses the bounding tetrahedron, sacrifices accuracy for speed
DELAUNAY3D_MEDIUM - Static variable in class nxopen.fields.FieldEvaluator.InterpolationEnum: Creates Tetrahedrals using the independent values and uses the bounding tetrahedron, compromise between accuracy and speed
delay - Variable in class nxopen.cae.Post.Animation: milliseconds
DELAY - Static variable in class nxopen.cae.Post.AnimationControl
delay() - Method in interface nxopen.display.SelPref: Returns the delay
License requirements: None.
delay() - Method in interface nxopen.motion.AnimationControl: Returns the animation delay
License requirements: mechanisms ("MECHANISMS")
.
delay() - Method in interface nxopen.motion.ArticulationControl: Returns the articulation delay
License requirements: mechanisms ("MECHANISMS")
.
delay() - Method in interface nxopen.motion.SpreadsheetRunControl: Returns the spreadsheet run delay
License requirements: mechanisms ("MECHANISMS")
.
delay(UFVariant, String, double) - Method in interface nxopen.uf.UFSim: Refer to UF_SIM_delay for documentation.
DELAYED - Static variable in class nxopen.positioning.Constraint.SolverStatus: The constraint is delayed and will not solve
delayedUpdateStatus - Variable in class nxopen.assemblies.LoadInterpartDataBuilder.LoadInterpartDataStatusData: Delayed update status data status for the failed part
delayEvaluation() - Method in interface nxopen.preferences.SessionSketch: Returns the delay evaluation preference.
DelayStatusInfo() - Constructor for class nxopen.PartDelayedUpdateStatus.DelayStatusInfo
DelayStatusInfo(boolean, boolean, boolean, boolean, boolean, boolean, boolean) - Constructor for class nxopen.PartDelayedUpdateStatus.DelayStatusInfo: Constructor for the DelayStatusInfo object.
delayTime() - Method in interface nxopen.motion.SignalChartListItem: Deprecated.
Deprecated in NX8.5.0. Obtain the expression using Motion.SignalChartListItem#delayTimeExpression to query or edit it.
delayTimeExpression() - Method in interface nxopen.motion.SignalChartListItem: Returns the threshold expression
License requirements: nx_motion_motor ("NX Motion Motor")
.
delayUpdateOnCreation() - Method in interface nxopen.drawings.CustomViewSettingsBuilder: Returns the delay update on creation
License requirements: None.
delayUpdateOnCreation() - Method in interface nxopen.preferences.PartDrafting: Returns the flag indicating whether the newly created views should update immediately even when the view update is delayed.
delayViewUpdate() - Method in interface nxopen.drawings.CustomViewSettingsBuilder: Returns the delay view update
License requirements: None.
delayViewUpdate() - Method in interface nxopen.preferences.PartDrafting: Returns the flag indicating whether to delay update of the drafting views during system initiated drawing updates
License requirements: None.
delete(boolean) - Method in interface nxopen.assemblies.Arrangement: Delete the given Arrangement .
delete() - Method in interface nxopen.assemblies.ClearanceSet: Delete this clearance set
License requirements: assemblies ("ASSEMBLIES MODULE")
.
delete(boolean) - Method in interface nxopen.assemblies.ComponentPattern: Deletes the component pattern object.
delete() - Method in interface nxopen.assemblies.Explosion: Deletes the given Explosion .
delete() - Method in interface nxopen.assemblies.Order: Deletes an order
License requirements: assemblies ("ASSEMBLIES MODULE")
.
delete(NXObject) - Method in interface nxopen.AttributePropertiesBaseBuilder: Delete the attribute from the given object.
delete(String, AttributePropertiesBaseBuilder.DataTypeOptions) - Method in interface nxopen.AttributeTemplatesBuilder: Delete an attribute template by specifying the title and type of the template.
delete(UIBlock) - Method in interface nxopen.blockstyler.SetList: Deletes an item from the list
License requirements: None.
DELETE - Static variable in class nxopen.cae.CompanionResultBuilder.CompanionResultDisposition: Companion Result Object will be deleted when primary results are deleted
delete(CompanionResult) - Method in interface nxopen.cae.CompanionResultCollection: Delete a CompanionResult from the collection
License requirements: nx_masterfem ("Finite Element Modeling")

Created in NX7.5.0
delete(Function) - Method in interface nxopen.cae.FunctionCollection: Delete a Function in the Scenario database of Motion Simulation and Advanced Simulation.
delete(LaminateDynamicEvent) - Method in interface nxopen.cae.LaminateDynamicEventCollection: Deletes the laminate dynamic event
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
delete(LaminateDynamicSim) - Method in interface nxopen.cae.LaminateDynamicSimCollection: Deletes the laminate dynamic sim
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
delete(SimCondition) - Method in interface nxopen.cae.SimConditionCollection: Deletes the specified SimCondition .
delete(SimConditionParam) - Method in interface nxopen.cae.SimConditionParamCollection: Deletes a SimConditionParam .
delete(SimConditionTimeStep) - Method in interface nxopen.cae.SimConditionTimeStepCollection: Deletes a SimConditionTimeStep from time history
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Created in NX9.0.0
delete(SimLoadRecipe[]) - Method in interface nxopen.cae.SimLoadRecipeCollection: Delete a list of load recipes
License requirements: nx_masterfem ("Finite Element Modeling")
.
delete(SimLoadRecipeMapEntry[]) - Method in interface nxopen.cae.SimLoadRecipeMapEntryCollection: Delete a list of map entries
License requirements: nx_masterfem ("Finite Element Modeling")
.
delete(SimLoadRecipeSource[]) - Method in interface nxopen.cae.SimLoadRecipeSourceCollection: Delete a list of sources
License requirements: nx_masterfem ("Finite Element Modeling")
.
delete() - Method in interface nxopen.cae.xyplot.MarkerModel: Deletes the marker model
License requirements: nx_ftk ("NX Advanced Graphing")
.
delete(int) - Method in interface nxopen.cam.FormEdgesBuilder: Delete an existing form edges item
License requirements: cam_base ("CAM BASE")
.
delete(NXObject) - Method in interface nxopen.cam.HolderSectionBuilder: Delete an existing holder section item
License requirements: cam_base ("CAM BASE")
.
delete(int) - Method in interface nxopen.cam.HolderSectionBuilder: Delete an existing holder section item by index
License requirements: cam_base ("CAM BASE")
.
delete(int) - Method in interface nxopen.cam.InspectionPathPointBuilder: Delete an existing path point
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
delete(int) - Method in interface nxopen.cam.MillingTrackpointBuilder: Delete an existing trackpoint
License requirements: cam_base ("CAM BASE")
.
delete(int) - Method in interface nxopen.cam.MultipleStepoverBuilder: Delete a item
License requirements: cam_base ("CAM BASE")
.
delete(NXObject) - Method in interface nxopen.cam.PreprocessGeometryBuilder: Delete one facet body
License requirements: None.
delete(int) - Method in interface nxopen.cam.StepParamsBuilder: Delete an existing step params item
License requirements: cam_base ("CAM BASE")
.
delete(NXObject) - Method in interface nxopen.cam.TrackingBuilder: Delete an existing trackpoint
License requirements: cam_base ("CAM BASE")
.
delete(int) - Method in interface nxopen.cam.TurnAvoidancePathPointsBuilder: Delete an existing avoidance path point
License requirements: cam_base ("CAM BASE")
.
delete(int) - Method in interface nxopen.cam.TurnRoughVariableIncrementBuilder: Delete a selected item
License requirements: cam_base ("CAM BASE")
.
delete(int) - Method in interface nxopen.cam.TurnThreadFinishPassesBuilder: Delete an existing finish passes item
License requirements: cam_base ("CAM BASE")
.
delete(int) - Method in interface nxopen.cam.UdtSectionBuilder: Delete an existing udt section item
License requirements: cam_base ("CAM BASE")
.
DELETE - Static variable in class nxopen.drafting.AnnotateViewsBuilder.ExistingAutomaticAnnotation
delete(SectionLineSegmentPointBuilder) - Method in interface nxopen.drawings.SectionLineSegmentPointListBuilder: Deletes a given SectionLineSegmentPointBuilder object from the list
License requirements: drafting ("DRAFTING")

Created in NX10.0.0
delete(int) - Method in interface nxopen.drawings.SectionLineSegmentPointListBuilder: Deletes SectionLineSegmentPointBuilder object of a certain index from the list
License requirements: drafting ("DRAFTING")

Created in NX10.0.0
delete(Expression) - Method in interface nxopen.ExpressionCollection: Deletes an expression
License requirements: None.
DELETE - Static variable in class nxopen.facet.BridgeFacetBodyBuilder.Input: Delete the input facet body after builder committing
DELETE - Static variable in class nxopen.facet.FeatureExtractionBuilder.InputActions: Delete the input facet bodies
DELETE - Static variable in class nxopen.facet.MergeFacetBodyBuilder.Input: Delete the input facet body after builder committing
DELETE - Static variable in class nxopen.facet.SewFacetBodyBuilder.Input: Delete the input facet body after builder committing
delete(GeometricConstraintData) - Method in interface nxopen.features.GeometricConstraintDataManager: Deletes a given GeometricConstraintData object from the list
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT")

Created in NX5.0.0
delete(int) - Method in interface nxopen.features.GeometricConstraintDataManager: Deletes GeometricConstraintData object of a certain index from the list
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT")

Created in NX5.0.0
delete(GeometricConstraintDataManager) - Method in interface nxopen.features.GeometricConstraintDataSetManager: Deletes GeometricConstraintDataManager object from the list
License requirements: features_modeling ("FEATURES MODELING")

Created in NX5.0.0
delete(int) - Method in interface nxopen.features.GeometricConstraintDataSetManager: Deletes Nth GeometricConstraintDataManager object from the list
License requirements: features_modeling ("FEATURES MODELING")

Created in NX5.0.0
DELETE - Static variable in class nxopen.features.shipdesign.FeaturesBatchOperationBuilder.Types
DELETE - Static variable in class nxopen.features.StudioSplineBuilder.CurveOption: Deprecated.

Delete input curve
DELETE - Static variable in class nxopen.features.StudioSplineBuilderEx.InputCurveOptions: Delete original curve
DELETE - Static variable in class nxopen.features.subdivision.ExtractCagePolylineBuilder.InputCurveOption: Delete input curves
DELETE - Static variable in class nxopen.features.TrimAndExtendBuilder.ArrowSideType
DELETE - Static variable in class nxopen.features.TrimExtendBuilder.ArrowSideOptions: Delete
delete() - Method in interface nxopen.fields.Field: Delete this field; destroys the field and removes all references to it.
delete() - Method in interface nxopen.fields.FieldEvaluator: Delete this field evaluator; destroys the field evaluator and removes all references to it.
delete(String[], String[], int) - Method in interface nxopen.gateway.BaseExplicitOrderBuilder: Deletes the saved order/orders that has/have been selected by the user from the list of saved orders
License requirements: None.
delete(String) - Method in interface nxopen.gateway.BookmarkFile: Deletes an existing bookmark file.
DELETE - Static variable in class nxopen.geometricutilities.CurveOptions.InputCurve: Deletes the original input curve and creates the new output curve
delete(String) - Method in interface nxopen.layout2d.ComponentDefinition: Deletes definition
License requirements: nx_layout ("NX Layout")
.
DELETE - Static variable in class nxopen.mechatronics.ComparisonResult.Category: Delete category
delete(PMNavFolderObject, boolean) - Method in interface nxopen.mechatronics.PMNavFolderObjectCollection: Deletes the PMNavFolderObject object.
delete() - Method in interface nxopen.ObjectGeneralPropertiesBuilder: Delete the name of each selected object.
DELETE - Static variable in class nxopen.ObjectList.DeleteOption: Delete the object
delete(NXObject) - Method in interface nxopen.pdm.EffectivityAttributePropertiesBuilder: Delete the attribute from the given object.
delete() - Method in interface nxopen.PhysicalMaterial: Deletes a material from the part.
DELETE - Static variable in class nxopen.tooling.BendInsertDesignBuilder.Types: delete
DELETE - Static variable in class nxopen.tooling.BlendCurve3DBuilder.InputCurvesOption: Delete input curves
DELETE - Static variable in class nxopen.tooling.CornerDesignBuilder.Types: Delete operation
DELETE - Static variable in class nxopen.tooling.DieBaseBuilder.DesignToolOption: delete selected die base
DELETE - Static variable in class nxopen.tooling.InsertAuxiliaryBuilder.CircOperationTypes: delete
DELETE - Static variable in class nxopen.tooling.InsertAuxiliaryBuilder.DesignToolOption: delete
DELETE - Static variable in class nxopen.tooling.InsertAuxiliaryBuilder.RectOperationOption: delete
DELETE - Static variable in class nxopen.tooling.IntermediateStageBuilder.EditOptions: Delete current intermediate stage type
DELETE - Static variable in class nxopen.tooling.PiercingInsertBuilder.Types: the delete insert type
DELETE - Static variable in class nxopen.tooling.QuickQuotationBuilder.ManageTemporaryObjectsTypes
DELETE - Static variable in class nxopen.tooling.ReliefDesignBuilder.Types: Delete operation
DELETE - Static variable in class nxopen.tooling.ScrapDesignBuilder.EditScrapType: Deletes scraps
DELETE - Static variable in class nxopen.Update.FailureOption: Delete failing object
DELETE - Static variable in class nxopen.userdefinedobjects.UserDefinedEvent.Reason: An associated object was deleted - UDO cleanup event
delete() - Method in interface nxopen.validate.Requirement: Deletes a user requirement and child RequirementCheck or removes a external requirement.
delete() - Method in interface nxopen.Validation: Delete Validation Object
License requirements: None.
delete() - Method in interface nxopen.weld.WeldJointBuilder: Deletes all joints set by WeldJointBuilder.joint() .
delete3dWorkpieces(CAMObject[]) - Method in interface nxopen.cam.CAMSetup: Delete 3D workpieces of the selected operations
License requirements: cam_base ("CAM BASE")
.
DELETE_ALL_INSTANCES - Static variable in class nxopen.tooling.ReliefDesignBuilder.MethodOfDelete: Delete all instances
DELETE_BENDS - Static variable in class nxopen.tooling.DirectUnfoldBuilder.Types: the direct unfold type of delete all bends
DELETE_DEPENDENTS - Static variable in class nxopen.Update.FailureOption: Delete failing object and its dependents
DELETE_EACH - Static variable in class nxopen.SuppressByExpressionBuilder.ExpressionAction: Delete expression of one feature
DELETE_FEATURE_LST_ERROR - Static variable in class nxopen.uf.UFConstants
DELETE_IMPORTS - Static variable in class nxopen.ExpressionCollection.ImportMode: Delete all expressions in the imported file
DELETE_INSERT - Static variable in class nxopen.tooling.GeneralInsertBuilder.Types
DELETE_INSERT - Static variable in class nxopen.tooling.ShimBuilder.Types
DELETE_PAD - Static variable in class nxopen.tooling.BackingPadBuilder.Types
DELETE_PATH - Static variable in class nxopen.routing.DesignRuleViolationCollection.Reason
DELETE_RETAINED_ANNOTATIONS - Static variable in class nxopen.uf.UFDrf.RetainedState
DELETE_SELECTED_INSERTS - Static variable in class nxopen.tooling.PiercingInsertBuilder.AssociationToolType: The operation option is delete selected inserts
DELETE_SELECTED_INSTANCE - Static variable in class nxopen.tooling.ReliefDesignBuilder.MethodOfDelete: Delete selected instance
DELETE_SHARED - Static variable in class nxopen.SuppressByExpressionBuilder.ExpressionAction: Delete the common expression being shared by group of features
deleteAfuFile(String) - Method in interface nxopen.cae.AfuManager: Delete an AFU file
License requirements: nx_ftk ("NX Advanced Graphing")
.
deleteAll() - Method in interface nxopen.geometricutilities.BoundaryDefinitionBuilder: Deletes all the points in the boundary definition
License requirements: studio_free_form ("STUDIO FREE FORM")
.
deleteAll(Tag, int) - Method in interface nxopen.uf.UFAttr: Refer to UF_ATTR_delete_all for documentation.
deleteAll(Tag) - Method in interface nxopen.uf.UFClear: Deprecated.
The equivalent Open C method has retired
deleteAllAnalysisData() - Method in interface nxopen.assemblies.ClearanceSetCollection: Deletes all clearance analysis data from the given part, including all clearance analysis data sets, analysis results, and interference bodies.
deleteAllAttributesByType(NXObject.AttributeType) - Method in interface nxopen.NXObject: Deprecated.
Deprecated in NX8.0.0. Use NXObject.deleteUserAttributes(nxopen.NXObject.AttributeType, nxopen.Update.Option) instead.
deleteAllAttributesByType(NXObject.AttributeType, Update.Option) - Method in interface nxopen.NXObject: Deprecated.
Deprecated in NX8.0.0. Use NXObject.deleteUserAttributes(nxopen.NXObject.AttributeType, nxopen.Update.Option) instead.
deleteAllChannels() - Method in interface nxopen.sim.KinematicConfigurator: Deletes all channels from the kinematic model
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
deleteAllChildren() - Method in interface nxopen.routing.Division: Deletes all children divisions of the input division and the splitter curves that were used to create the children divisions.
deleteAllConstraints() - Method in interface nxopen.features.ShowRelatedFacesBuilder: Deletes all the persistent constraints on the related face
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
.
deleteAllExistingRegions() - Method in interface nxopen.tooling.MWDefineRegionsBuilder: Delete all existing regions
License requirements: None.
deleteAllFacetsFromModel(Tag) - Method in interface nxopen.uf.UFFacet: Refer to UF_FACET_delete_all_facets_from_model for documentation.
deleteAllGeometries() - Method in interface nxopen.sim.KinematicComponentBuilder: Deletes all geometry elements from the component
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
deleteAllGuideLines() - Method in interface nxopen.tooling.MWDesignGuideLinesBuilder: Button for deleting all the guide lines.
deleteAllHoldingSystems() - Method in interface nxopen.sim.KinematicConfigurator: Delete all holding systems from the kinematic model
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
deleteAllItemUdes(UFVariant, UFCambnd.UdeSetType) - Method in interface nxopen.uf.UFCambnd: Refer to UF_CAMBND_delete_all_item_udes for documentation.
deleteAllItemUdes(UFVariant, UFCambnd.UdeSetType) - Method in interface nxopen.uf.UFCambndWedm: Refer to UF_CAMBND_WEDM_delete_all_item_udes for documentation.
deleteAllMarks() - Method in interface nxopen.uf.UFUndo: Refer to UF_UNDO_delete_all_marks for documentation.
deleteAllMiscCbs() - Method in interface nxopen.uf.UFUndo: Refer to UF_UNDO_delete_all_misc_cbs for documentation.
deleteAllOffsetRelationOnBody() - Method in interface nxopen.features.ShowRelatedFacesBuilder: Deletes all the offset relations on the body which the face belongs to
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
.
deleteAllPartInformationalFeatureAlerts() - Method in interface nxopen.features.FeatureCollection: Delete all informational alerts from all the features in a given part
License requirements: None.
deleteAllPartingSurfaces() - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder: Method to delete all the parting surfaces before auto create parting surfaces if the user chooses to do so.
deleteAllPoints(Spline) - Method in interface nxopen.geometricutilities.CurveShapingBuilder: Deletes all points on a curve.
deleteAllRegions() - Method in interface nxopen.cam.CutRegionsBuilder: Delete all regions method
License requirements: None.
deleteAllSegments() - Method in interface nxopen.features.sheetmetal.FlexibleCableBuilder: Deletes all cable segments.
deleteAllSystemClasses() - Method in interface nxopen.sim.KinematicComponentBuilder: Delete all system classes of the component
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
deleteAllTemplates() - Method in interface nxopen.cae.Post: Delete all loaded template xml files
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
deleteAllUdes(Tag, UFUde.SetType) - Method in interface nxopen.uf.UFParam: Refer to UF_PARAM_delete_all_udes for documentation.
deleteAllUndoMarks() - Method in interface nxopen.Session: Deletes all undo marks
License requirements: None.
deleteAllUnMarkedJoints() - Method in interface nxopen.weld.WeldJointBuilder: Deletes any joints that were not marked with a call to WeldJointBuilder.markJointsToKeep() .
deleteArrangement(boolean) - Method in interface nxopen.tooling.ChangeoverManagementBuilder: Delete the selected changeover.
deleteArray(NXObject) - Method in interface nxopen.AttributePropertiesBaseBuilder: Delete the attribute array from the given object.
deleteArray(Tag, boolean) - Method in interface nxopen.uf.UFAssem: Refer to UF_ASSEM_delete_array for documentation.
deleteArrayHole(int) - Method in interface nxopen.tooling.FastenerAssy: Deletes array hole data for the fastener assembly
License requirements: None.
deleteArrayUnit(BaseUnit) - Method in interface nxopen.cae.ftk.DataManager: Deletes array unit
License requirements: nx_ftk ("NX Advanced Graphing")
.
deleteAttr(Tag, int, String) - Method in interface nxopen.uf.UFAttr: Refer to UF_ATTR_delete for documentation.
deleteAttribute() - Method in interface nxopen.tooling.GeneralInsertBuilder: Remove attribute from Attribute of Object
License requirements: None.
deleteAttribute() - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder: The action to delete selected attributes
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
deleteAttributeByTypeAndTitle(NXObject.AttributeType, String) - Method in interface nxopen.NXObject: Deprecated.
Deprecated in NX8.0.0. Use NXObject.deleteUserAttribute(nxopen.NXObject.AttributeType, java.lang.String, boolean, nxopen.Update.Option) instead.
deleteAttributeByTypeAndTitle(NXObject.AttributeType, String, Update.Option) - Method in interface nxopen.NXObject: Deprecated.
Deprecated in NX8.0.0. Use NXObject.deleteUserAttribute(nxopen.NXObject.AttributeType, java.lang.String, boolean, nxopen.Update.Option) instead.
deleteAxis(KinematicAxis) - Method in interface nxopen.sim.KinematicConfigurator: Deletes the given axis
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
deleteAxissearch(DurabilityAxisSearch) - Method in interface nxopen.cae.DurabilityAxisSearchCollection: Delete a durability stress axes.
deleteBendSequence(Tag, int) - Method in interface nxopen.uf.UFSmd: Deprecated.
The equivalent Open C method has retired
deleteBlendCurves(Curve[]) - Method in interface nxopen.tooling.BlendCurve3DBuilder: Delete the preview blend curves.
DeleteBody - Interface in nxopen.features: Represents a delete body feature.
DeleteBodyBuilder - Interface in nxopen.features: Represents a DeleteBody builder for Delete Body feature.
deleteBodyParms(Tag[]) - Method in interface nxopen.uf.UFModeling: Refer to UF_MODL_delete_body_parms for documentation.
deleteBoundaries(Tag, UFCam.GeomType) - Method in interface nxopen.uf.UFCambnd: Refer to UF_CAMBND_delete_boundaries for documentation.
deleteBoundary(Tag, UFCam.GeomType, UFVariant) - Method in interface nxopen.uf.UFCambnd: Refer to UF_CAMBND_delete_boundary for documentation.
deleteBrokenInterpartLinks() - Method in interface nxopen.PartCleanup: Returns the option that specifies whether or not to delete all inter-part links where one or more components in that inter-part link have been removed.
deleteButtonClicked() - Method in interface nxopen.tooling.AssemblyDrawingBuilder: Returns the delete button clicked attribute
License requirements: None.
deleteCaConfigProperties() - Method in interface nxopen.sim.KinematicComponent: Deletes ca config properties
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder") OR nx_sinumerik_ca ("Sinumerik Collision Avoidance")
.
deleteCallback(ListBox) - Method in interface nxopen.blockstyler.ListBox.DeleteCallback: Delete callback.
deleteCallback(SetList, UIBlock) - Method in interface nxopen.blockstyler.SetList.DeleteCallback: Delete callback.
deleteCamSetup() - Method in interface nxopen.Part: Delete CAM setup
License requirements: cam_base ("CAM BASE")
.
deleteChamferLabel() - Method in interface nxopen.features.LabelChamferBuilder: Returns the delete chamfer label flag.
deleteChannel(String) - Method in interface nxopen.sim.KinematicConfigurator: Deletes a channel name from the list of channels
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
deleteChannelName(String) - Method in interface nxopen.sim.KinematicComponentBuilder: Deletes a channel name from the component
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
deleteCharacteristic(String, NXObject.AttributeType) - Method in interface nxopen.routing.CharacteristicList: Removes a characteristic from the characteristic list.
deleteCharacteristicsInheritaceInformation() - Method in interface nxopen.weld.WeldJointBuilder: Delete welding characteristics inheritance information.
deleteCharacterstics(CharacteristicList) - Method in interface nxopen.routing.ICharacteristic: Removes the input list of characteristics from this object.
deleteChild(FlangeSteelRibChildBuilder) - Method in interface nxopen.die.FlangeSteelRibParentBuilder: Deletes a child Flange Steel Rib.
deleteChild(HandlingCoreChildBuilder) - Method in interface nxopen.die.HandlingCoreParentBuilder: Deletes a child handling core.
deleteChild(HoleChildBuilder) - Method in interface nxopen.die.HoleParentBuilder: Deletes a child hole.
deleteChild(KeywayChildBuilder) - Method in interface nxopen.die.KeywayParentBuilder: Deletes a child keyway.
deleteChild(PadChildBuilder) - Method in interface nxopen.die.PadParentBuilder: Deletes a child pad.
deleteChild(PierceHoleChildBuilder) - Method in interface nxopen.die.PierceHoleParentBuilder: Deletes a child pierce hole
License requirements: ug_die_design ("Die Design")
.
deleteChild(PointChildBuilder) - Method in interface nxopen.die.PointParentBuilder: Deletes a child point.
deleteChild(PressureSystemChildBuilder) - Method in interface nxopen.die.PressureSystemParentBuilder: Deletes a child pressure system.
deleteChild(RibChildBuilder) - Method in interface nxopen.die.RibParentBuilder: Deletes a child rib.
deleteChild(SteelInsertSegmentChildBuilder) - Method in interface nxopen.die.SteelInsertSegmentParentBuilder: Deletes a child siseg
License requirements: ug_die_design ("Die Design")
.
deleteChild(ThroatChildBuilder) - Method in interface nxopen.die.ThroatParentBuilder: Deletes a child throat section.
deleteChild(WearPlateLocChildBuilder) - Method in interface nxopen.die.WearPlateLocParentBuilder: Deletes a child wear plate and locator
License requirements: ug_die_design ("Die Design")
.
deleteChildRule(String) - Method in interface nxopen.RuleManager: Delete a child rule from this rule manager.
deleteClassRule(String, String) - Method in interface nxopen.uf.UFKf: Refer to UF_KF_delete_class_rule for documentation.
deleteClippingParameters(ClippingParameters) - Method in interface nxopen.cae.ResultManager: Delete a ClippingParameters object.
deleteColors() - Method in interface nxopen.PlotColorsWidthsBuilder: Delete drawing sheet colors
License requirements: None.
deleteComparisonReport() - Method in interface nxopen.DrawingCompareManager: Deletes part comparison report.
deleteCompAssertion(Tag) - Method in interface nxopen.uf.UFWeight: Refer to UF_WEIGHT_delete_comp_assertion for documentation.
deleteCompDrawing(NXObject, String, String, String, String) - Method in interface nxopen.tooling.CompDrawingBuilder: Deletes drawings in self-contained part or deletes a master model part with drawings
License requirements: None.
deleteComponent(String) - Method in interface nxopen.pdm.PendingComponentsManager: Deletes a pending component.
deleteComponent(KinematicComponent) - Method in interface nxopen.sim.KinematicComponent: Deletes a child component
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder") OR resource_manager_nx ("Teamcenter Resource Manager")
.
deleteComponent(KinematicComponent) - Method in interface nxopen.sim.KinematicConfigurator: Deletes the given component
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
deleteComponents(Component[]) - Method in interface nxopen.layout2d.ComponentCollection: Deletes a list of 2D Components
License requirements: nx_layout ("NX Layout")
.
deleteComponents(int) - Method in interface nxopen.tooling.AddReusablePart: Deletes an array instance of a component
License requirements: None.
deleteCompSheet(NXObject, String, String, String, String) - Method in interface nxopen.tooling.CompDrawingBuilder: Deletes a sheet from a component.
deleteConstraint(CfdContactPreventionConstraint) - Method in interface nxopen.cae.CfdContactPreventionConstraintCollection: Delete a contact prevention constraint.
deleteConstraint(CfdLocalResolutionConstraint) - Method in interface nxopen.cae.CfdLocalResolutionConstraintCollection: Delete a local resolution constraint.
deleteConstraint(Feature) - Method in interface nxopen.features.FaceRecognitionBuilder: Deletes the persistent constraint
License requirements: gateway ("UG GATEWAY")
.
deleteConstraint(Feature) - Method in interface nxopen.features.ShowRelatedFacesBuilder: Deletes the persistent constraint
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
.
deleteConstraintReference(ConstraintReference) - Method in interface nxopen.positioning.Constraint: Removes a ConstraintReference from the constraint.
deleteConstraints(int, Tag[]) - Method in interface nxopen.uf.UFSket: Refer to UF_SKET_delete_constraints for documentation.
deleteConstraintsOnGeometries(NXObject[]) - Method in interface nxopen.Sketch: Deletes all geometric constraints associated with the object and all of its vertices.
deleteConstraintsOnGeometries(Sketch.ConstraintGeometry[]) - Method in interface nxopen.Sketch: Deletes all geometric constraints associated with the object and all of its vertices.
deleteCriteriaObject(NXObject) - Method in interface nxopen.annotations.SearchModelViewBuilder: Delete search criteria object in search model view builder
License requirements: None.
deleteCrossSectionParameters(CrossSectionParameters) - Method in interface nxopen.cae.ResultManager: Delete a CrossSectionParameters object.
deleteCurrentAlignment() - Method in interface nxopen.drawings.ViewAlignmentBuilder: Deletes a view alignment that is stored as the current alignment in the builder
License requirements: drafting ("DRAFTING")
.
deleteCurvature() - Method in interface nxopen.facet.CurvatureBuilder: Deletes the curvature data associated with the input facet bodies.
DeleteCurve - Interface in nxopen.features: Represents a delete curve feature
To create or edit an instance of this class, use DeleteCurveBuilder

Created in NX9.0.0
deleteCurve(Curve) - Method in interface nxopen.features.IFormBuilder: Deletes a iso-parameter curve
License requirements: studio_free_form ("STUDIO FREE FORM")
.
deleteCurve() - Method in interface nxopen.features.RapidSurfaceBuilder: Deletes curve
License requirements: studio_free_form ("STUDIO FREE FORM")
.
deleteCurve() - Method in interface nxopen.weld.JointItemBuilder: Deletes the joint curve from the builder.
DeleteCurveBuilder - Interface in nxopen.features: Represents a DeleteCurve builder
To create a new instance of this class, use SynchronousCurveCollection.createDeleteCurveBuilder(nxopen.features.DeleteCurve)
Default values.
deleteCurves() - Method in interface nxopen.features.RapidSurfaceBuilder: Returns the delete curves
License requirements: studio_free_form ("STUDIO FREE FORM")
.
deleteCushion(String) - Method in interface nxopen.tooling.DefineCamBuilder: Delete the cushion
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
deleteCustomPoints(Tag, UFCamgeom.CustomPointType) - Method in interface nxopen.uf.UFCamgeom: Refer to UF_CAMGEOM_delete_custom_points for documentation.
deleteCutView(CutView) - Method in interface nxopen.CutViewCollection: Delete the Master Cut feature associated with a cut view.
DELETED - Static variable in class nxopen.features.shipdesign.PenetrationUtils.RequestState
DELETED - Static variable in class nxopen.weld.AutoPointBuilder.InterferenceDetails: Indicates weld points exist and parts were removed.
DELETED - Static variable in class nxopen.weld.ConnectionFinderBuilder.FilterTypes
DELETED_BY_OPEN - Static variable in class nxopen.assemblies.ComponentAssembly.OpenComponentStatus: The component was deleted on load as a result of the open
deleteDangling() - Method in interface nxopen.cae.ElementDeleteBuilder: Returns the delete dangling node flag, whether the dangling nodes to be deleted
License requirements: None.
deleteDataset(Tag) - Method in interface nxopen.uf.UFClear: Deprecated.
The equivalent Open C method has retired
deleteDbcMld(UFVariant) - Method in interface nxopen.uf.UFDbcMld: Refer to UF_DBC_MLD_delete for documentation.
deleteDefiningPointAtIndex(int) - Method in interface nxopen.routing.SplinePathBuilder: Deletes a defining point from the spline.
deleteDeformationParameters(DeformationParameters) - Method in interface nxopen.cae.ResultManager: Delete a DeformationParameters object.
deletedHolesDisplay() - Method in interface nxopen.annotations.HoleTableSettingsFormatBuilder: Returns the deleted holes display
License requirements: None.
deleteDieData() - Method in interface nxopen.die.Tip: Deletes the copy of the product data.
deleteDimensions(int, Tag[]) - Method in interface nxopen.uf.UFSket: Refer to UF_SKET_delete_dimensions for documentation.
deleteDispMesh(int, Tag[]) - Method in interface nxopen.uf.UFSf: Refer to UF_SF_delete_disp_mesh for documentation.
deleteDispResults(int) - Method in interface nxopen.uf.UFSf: Refer to UF_SF_delete_disp_results for documentation.
deletedPointsColor() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder: Returns the color that will be used for the headform deleted points of the European NCAP (New Car Assessment Program) grid.
deleteDrawing(String, String, String, String) - Method in interface nxopen.tooling.CompDrawingBuilder: Deprecated.
Deprecated in NX8.5.0. Use CompDrawingBuilder.deleteCompDrawing(nxopen.NXObject, java.lang.String, java.lang.String, java.lang.String, java.lang.String) instead.
deleteDrawing(Tag) - Method in interface nxopen.uf.UFDraw: Refer to UF_DRAW_delete_drawing for documentation.
deleteDrawingSheetColors(Tag) - Method in interface nxopen.uf.UFPlot: Refer to UF_PLOT_delete_drawing_sheet_colors for documentation.
deleteDrawingSheetWidths(Tag) - Method in interface nxopen.uf.UFPlot: Refer to UF_PLOT_delete_drawing_sheet_widths for documentation.
deleteDrpos(UFVariant) - Method in interface nxopen.uf.UFDrpos: Refer to UF_DRPOS_delete for documentation.
deleteDuplicateElements() - Method in interface nxopen.cae.modelcheck.DuplicateElementsCheckBuilder: Deletes the duplicate elements and clear all cached duplicate elements in this builder.
deleteDuplicateLights() - Method in interface nxopen.PartCleanup: Returns the option that specifies whether to delete duplicate light source objects from the part file.
deleteDursolNx(Tag) - Method in interface nxopen.uf.UFSf: Refer to UF_SF_delete_dursol_nx for documentation.
deleteDynamicLabels(boolean[]) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder: Deletes dynamic labels whose corresponding positions are set to true in the array
License requirements: studio_analyze ("STUDIO ANALYZE")
.
deleteDynamicRule(String, String) - Method in interface nxopen.RuleManager: Delete an existing dynamic rule.
DeleteEdge - Interface in nxopen.features: Represents a delete edge feature
To create or edit an instance of this class, use DeleteEdgeBuilder

Created in NX8.0.0
DeleteEdgeBuilder - Interface in nxopen.features: Represents a builder for a delete edge feature.
deleteEvent(DurabilityEvent) - Method in interface nxopen.cae.DurabilityEventCollection: Delete a durability event.
deleteEvent(RSEvent) - Method in interface nxopen.cae.responsesimulation.RSEventCollection: Deletes an event
License requirements: nx_response_anlys ("NX Response Analysis")
.
deleteException(DisplayableObject, DisplayableObject) - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder: Delete an exception.
deleteExcitation(DurabilityExcitation) - Method in interface nxopen.cae.DurabilityExcitationCollection: Delete a durability excitation.
deleteExcitation(Excitation) - Method in interface nxopen.cae.responsesimulation.ExcitationCollection: Deletes an excitation
License requirements: nx_response_anlys ("NX Response Analysis")
.
deleteExistingSheets() - Method in interface nxopen.tooling.MWDefineSheetsBuilder: For suppressing parting, or delete existing sheets
License requirements: None.
deleteExitBuilder() - Method in interface nxopen.weld.EdgePrepValuesBuilder: Deletes the JointExitBuilder .
deleteExp(String) - Method in interface nxopen.uf.UFModlGeneral: Refer to UF_MODL_delete_exp for documentation.
deleteExplosion(Tag) - Method in interface nxopen.uf.UFAssem: Refer to UF_ASSEM_delete_explosion for documentation.
deleteExpTag(Tag) - Method in interface nxopen.uf.UFModlGeneral: Refer to UF_MODL_delete_exp_tag for documentation.
deleteExtendSection() - Method in interface nxopen.die.AddendumSectionBuilder: Deletes the Section used for extended constraint curve.
deleteExtractFace(Face) - Method in interface nxopen.geometricutilities.SnipIntoPatchesBuilder: Delete the extracted face
License requirements: None.
DeleteFace - Interface in nxopen.features: Represents a delete face feature , don't use it until nx502
To create or edit an instance of this class, use DeleteFaceBuilder

Created in NX5.0.2
DeleteFaceBuilder - Interface in nxopen.features: Represents a builder for a delete face feature, don't use it until nx502.
DeleteFaceBuilder.CapOptionValues - Class in nxopen.features: Represents the cap option values.
DeleteFaceBuilder.FaceEdgeBlendPreferenceOptions - Class in nxopen.features: Represents the face edge blend preference options.
DeleteFaceBuilder.SelectTypes - Class in nxopen.features: Enumeration of select type, don't use it until nx502 .
DeleteFaceBuilder.SetbackOptions - Class in nxopen.features: Represents the set back options.
deleteFacePair(NXObject[]) - Method in interface nxopen.features.MidSurfaceByFacePairsBuilder: Deletes the face pair
License requirements: solid_modeling ("SOLIDS MODELING")
.
deleteFaceSet(int) - Method in interface nxopen.features.OffsetSurfaceBuilder: Deprecated.
Deprecated in NX5.0.0. Use OffsetSurfaceBuilder.faceSets() instead.
deleteFatigue(DurabilityFatigue) - Method in interface nxopen.cae.DurabilityFatigueCollection: Delete a durability fatigue.
deleteFeature(CAMFeature) - Method in interface nxopen.cam.FeatureRecognitionBuilder: Deletes a manufacturing feature that was created through this builder instance
License requirements: None.
deleteFeature(Tag[]) - Method in interface nxopen.uf.UFModeling: Refer to UF_MODL_delete_feature for documentation.
deleteFeatureName() - Method in interface nxopen.FeatureGeneralPropertiesBuilder: Delete the name of the feature.
deleteFeaturesFromResult(TaggedObject[]) - Method in interface nxopen.weld.WeldAdvisorBuilder: Delete the features from the check result
License requirements: ugweld ("UG WELD")
.
deleteField(Field) - Method in interface nxopen.fields.FieldManager: Deletes the specified Field object; if the object cannot be deleted it is returned.
deleteFile(String) - Method in interface nxopen.cae.ftk.DataManager: Deletes afu/op2 file
License requirements: nx_ftk ("NX Advanced Graphing")
.
deleteFile(String, String) - Method in interface nxopen.pdm.CAEFileContainer: Delete a file from the list of files in the file container class CAEFileContainer .
deleteFile(String) - Method in interface nxopen.RemoteUtilities: Deletes a file.
deleteFillStrip(WeldFillStripBuilder) - Method in interface nxopen.weld.WeldFillBuilder: Delete a fill strip.
deleteFlatPattern(Tag) - Method in interface nxopen.uf.UFSmd: Refer to UF_SMD_delete_flat_pattern for documentation.
DeleteFontsBuilder - Interface in nxopen.routing: Represents a DeleteFontsBuilder
To create a new instance of this class, use RouteManager.createDeleteFontsBuilder(nxopen.NXObject[])

Created in NX8.5.0
deleteFreeBodyResultsBuilder(FreeBodyResultsBuilder) - Method in interface nxopen.cae.ResultManager: Delete a FreeBodyResultsBuilder object.
deleteFromClassSel(int) - Method in interface nxopen.uf.UFUi: Refer to UF_UI_delete_from_class_sel for documentation.
deleteFromCollaborativeDesign(NXObject[]) - Method in interface nxopen.assemblies.Subset: Deletes the design elements from the owning CollaborativeDesign .
deleteFromSelectedViews(int) - Method in interface nxopen.uf.UFSfPost: Refer to UF_SF_POST_delete_from_selected_views for documentation.
deleteFunction(FunctionObject) - Method in interface nxopen.mechatronics.FunctionObjectCollection: Dlete a FunctionObject object
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")

Created in NX7.5.0
deleteFunction(Tag) - Method in interface nxopen.uf.UFMotion: Refer to UF_MOTION_delete_function for documentation.
DeleteGapsBuilder - Interface in nxopen.routing: Represents a DeleteGapsBuilder
To create a new instance of this class, use RouteManager.createDeleteGapsBuilder(nxopen.NXObject[])

Created in NX8.5.0
deleteGeneralName() - Method in interface nxopen.FeatureGeneralPropertiesBuilder: Delete the name of the general object.
deleteGenericLifter(String) - Method in interface nxopen.tooling.DefineLifterBuilder: Delete the generic lifter
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
deleteGeometry(NXObject) - Method in interface nxopen.sim.KinematicComponentBuilder: Deletes a single geometry element from the component
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
deleteGeometry(Tag, UFCam.GeomType) - Method in interface nxopen.uf.UFCamgeom: Refer to UF_CAMGEOM_delete_geometry for documentation.
deleteGeometry(Tag) - Method in interface nxopen.uf.UFCamtext: Refer to UF_CAMTEXT_delete_geometry for documentation.
deleteGlobalLayup(LaminateGlobalLayup) - Method in interface nxopen.cae.LaminateGlobalLayupCollection: Delete an existing LaminateGlobalLayup instance
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")

Created in NX7.5.0
deletegraphs(PostGraph[]) - Method in interface nxopen.cae.Post: Deletes PostGraph objects
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Created in NX9.0.0
deleteGroup(SimBcGroup) - Method in interface nxopen.cae.SimGroupContainer: Deletes a BC group from this group container
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
deleteGuideLine(Curve) - Method in interface nxopen.tooling.MWDesignGuideLinesBuilder: Delete a given guide line.
deleteHolderSection(Tag, int) - Method in interface nxopen.uf.UFCutter: Refer to UF_CUTTER_delete_holder_section for documentation.
deleteHoldingSystem(String) - Method in interface nxopen.sim.KinematicComponentBuilder: Deletes a holding system from the component
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
deleteHoldingSystem(String) - Method in interface nxopen.sim.KinematicConfigurator: Delete a holding system from the list
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
deleteHoles() - Method in interface nxopen.features.ExtractFaceBuilder: Returns the option to specify if holes should be deleted from the extracted faces
License requirements: None.
deleteInformationalAlerts(NXObject[]) - Method in interface nxopen.features.FeatureCollection: Delete all informational alerts from the features and if numFrecs is 0 then delete informational alerts from all fetaures in the part
License requirements: None.
deleteInspectionSetup() - Method in interface nxopen.Part: Delete CMM Inspection setup
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
deleteInstance(Tag) - Method in interface nxopen.uf.UFFam: Refer to UF_FAM_delete_instance for documentation.
deleteInstanceDefinition(InstanceDefinition) - Method in interface nxopen.partfamily.TemplateManager: Delete the family member definition from template manager
License requirements: solid_modeling ("SOLIDS MODELING")
.
deleteInstanceRule(String, String) - Method in interface nxopen.uf.UFKf: Refer to UF_KF_delete_instance_rule for documentation.
deleteInstanceUserAttribute(NXObject.AttributeType, String, boolean, Update.Option) - Method in interface nxopen.assemblies.Component: Deletes the first attribute encountered with the given Type, Title and Index.
deleteInstanceUserAttributes(NXObject.AttributeType, Update.Option) - Method in interface nxopen.assemblies.Component: Deletes the attributes encountered with the given Type with option to update or not.
deleteInterf(Tag, Tag, Tag) - Method in interface nxopen.uf.UFClear: Deprecated.
The equivalent Open C method has retired
deleteInterference(DisplayableObject, DisplayableObject) - Method in interface nxopen.assemblies.ClearanceSet: Deletes the interference for a given object pair.
deleteInterference(Tag) - Method in interface nxopen.uf.UFMotion: Refer to UF_MOTION_delete_interference for documentation.
deleteInternalPatch(Face, Curve[]) - Method in interface nxopen.geometricutilities.SnipIntoPatchesBuilder: Delete internal patch from the selected surface
License requirements: None.
deleteInvalidAttributes() - Method in interface nxopen.PartCleanup: Returns the option that specifies whether to delete all invalid user attributes from the part file.
deleteIsoCurve(Curve[]) - Method in interface nxopen.geometricutilities.SnipIntoPatchesBuilder: Delete the isoparametric curve generated on the selected surface
License requirements: None.
deleteItem() - Method in interface nxopen.tooling.FaceAttributeBuilder: Delete an attribute item.
deleteItem(Tag, UFCam.GeomType, UFVariant) - Method in interface nxopen.uf.UFCamgeom: Refer to UF_CAMGEOM_delete_item for documentation.
deleteItemUde(UFVariant, UFCambnd.UdeSetType, UFVariant) - Method in interface nxopen.uf.UFCambnd: Refer to UF_CAMBND_delete_item_ude for documentation.
deleteItemUde(UFVariant, int, UFCambnd.UdeSetType, UFVariant) - Method in interface nxopen.uf.UFCambndWedm: Refer to UF_CAMBND_WEDM_delete_item_ude for documentation.
deleteJunction(KinematicJunction) - Method in interface nxopen.sim.KinematicConfigurator: Deletes the given junction
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
deleteJunction(UFVariant, String) - Method in interface nxopen.uf.UFSim: Refer to UF_SIM_delete_junction for documentation.
deleteLabel() - Method in interface nxopen.features.LabelNotchBlendBuilder: Returns the delete label
License requirements: None.
deleteLast() - Method in interface nxopen.geometricutilities.InteractiveSectionBuilder: Deletes last point or the plane created
License requirements: studio_free_form ("STUDIO FREE FORM")
.
deleteLastKeyPoint() - Method in interface nxopen.geometricutilities.BoundaryDefinitionBuilder: Deletes last key point and all the points from last key point up to and excluding its previous key point
License requirements: studio_free_form ("STUDIO FREE FORM")
.
deleteLastPathCurves() - Method in interface nxopen.features.shipdesign.ProfileSystemBuilder: Deletes the path curves returned from a call to ProfileSystemBuilder.getLastPathCurves() .
deleteLegacyConstraint(int, Tag[], int[], int) - Method in interface nxopen.uf.UFSket: Refer to UF_SKET_delete_legacy_constraint for documentation.
deleteLegend(Tag) - Method in interface nxopen.uf.UFSfLegend: Refer to UF_SF_LEGEND_delete_legend for documentation.
deleteLevel(Tag, int) - Method in interface nxopen.uf.UFCutLevels: Refer to UF_CUT_LEVELS_delete_level for documentation.
deleteLifterOnLifter(String) - Method in interface nxopen.tooling.DefineLifterBuilder: Delete the lifter on lifter
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
deleteLinearCam(String) - Method in interface nxopen.tooling.DefineCamBuilder: Delete the linear cam
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
deleteLineBreak(HoleCalloutSettingsBuilder.Featuretype, int) - Method in interface nxopen.annotations.HoleCalloutSettingsBuilder: If the nth hole feature parameter of feature type is a line break and it can be deleted, deletes it.
deleteLinkedFace() - Method in interface nxopen.tooling.ReliefDesignBuilder: Delete the linked face feature.
deleteLocationObjects() - Method in interface nxopen.routing.DesignRuleViolationLocation: Returns the function returns delete location objects, which is an option for deletion of violation location objects.
deleteLvNx(Tag, Tag) - Method in interface nxopen.uf.UFSf: Refer to UF_SF_delete_lv_nx for documentation.
deleteMachiningFeatures(int, UFVariant[]) - Method in interface nxopen.uf.UFMfm: Refer to UF_MFM_delete_machining_features for documentation.
deleteMargin(OrdinateOriginDimension) - Method in interface nxopen.annotations.OrdinateMargin: Deletes a defined ordinate margin object from the ordinate set.
deleteMark(int, String) - Method in interface nxopen.uf.UFUndo: Refer to UF_UNDO_delete_mark for documentation.
deleteMaterial(Tag) - Method in interface nxopen.uf.UFDisp: Refer to UF_DISP_delete_material for documentation.
deleteMaterials() - Method in interface nxopen.PartCleanup: Returns the option that specifies whether to delete all materials from the part file.
deleteMaterialsFromLibrary(String[], String) - Method in interface nxopen.PhysicalMaterialCollection: Deletes the materials from a material library file.
deleteMatingConditions() - Method in interface nxopen.assemblies.ComponentAssembly: Delete all the mating conditions in this assembly.
deleteMeaPoints() - Method in interface nxopen.cam.InspectionDeleteMeaPtsBuilder: Deletes specified analysis points.
deleteMeasurement(Tag) - Method in interface nxopen.uf.UFMotion: Refer to UF_MOTION_delete_measurement for documentation.
deleteMeasurementPoints() - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder: Returns a flag to indicate whether to delete measurement points to avoid collisions
License requirements: None.
deleteMeasures(ResultMeasure[]) - Method in interface nxopen.cae.ResultMeasureCollection: Delete list of result measures
License requirements: nx_masterfem ("Finite Element Modeling")
.
deleteMember(int) - Method in interface nxopen.PartFamilyManager: Deprecated.
Deprecated in NX9.0.0. Use TemplateManager.deleteInstanceDefinition(nxopen.partfamily.InstanceDefinition) instead
deleteMember(Tag, int) - Method in interface nxopen.uf.UFFam: Refer to UF_FAM_delete_member for documentation.
deleteMetasolution(DurabilityMetaSolution) - Method in interface nxopen.cae.DurabilityMetaSolutionCollection: Delete a durability metasolution.
deleteMethod() - Method in interface nxopen.tooling.ReliefDesignBuilder: Returns the delete method.
deleteModel() - Method in interface nxopen.sim.KinematicConfigurator: Deletes the entire kinematic model
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
deleteName(Tag) - Method in interface nxopen.uf.UFObj: Refer to UF_OBJ_delete_name for documentation.
deleteNode(Node) - Method in interface nxopen.blockstyler.Tree: Deletes the node from tree.
deleteNode(Point) - Method in interface nxopen.features.RapidSurfaceBuilder: Deletes node
License requirements: studio_free_form ("STUDIO FREE FORM")
.
deleteNode(NXObject) - Method in interface nxopen.weld.ConnectionFinderBuilder: Deletes the connected part information from the results.
deleteNonDeletables(Tag) - Method in interface nxopen.uf.UFSo: Refer to UF_SO_delete_non_deletables for documentation.
deleteNonPersistentConstraints() - Method in interface nxopen.positioning.Positioner: Deletes all the non-persistent Constraint s of the positioner.
deleteNthReachZone(int) - Method in interface nxopen.features.Human: Delete a HumanReachZone from human feature
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")

Created in NX4.0.0
deleteObject(Tag) - Method in interface nxopen.uf.UFObj: Refer to UF_OBJ_delete_object for documentation.
deleteObjectClearanceZone(DisplayableObject) - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder: Delete an existing Clearance Zone from around an object.
deleteObjectParms(Tag[]) - Method in interface nxopen.uf.UFModeling: Refer to UF_MODL_delete_object_parms for documentation.
deleteObjects(TaggedObject[]) - Method in interface nxopen.markup.MarkupFileObjectCollection: Deletes a list of nxopen.Markup.MarkupObject
License requirements: None.
deleteObjects(NXObject[]) - Method in interface nxopen.Sketch: Deletes objects from the sketch
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
DeleteObjectsBuilder - Interface in nxopen.routing: Represents a DeleteObjectsBuilder
To create a new instance of this class, use RouteManager.createDeleteObjectsBuilder(nxopen.NXObject[])

Created in NX6.0.0
deleteOffsetRelation(NXObject[]) - Method in interface nxopen.features.FaceRecognitionBuilder: Deletes the offset relation
License requirements: gateway ("UG GATEWAY")
.
deleteOffsetRelation(NXObject[]) - Method in interface nxopen.features.ShowRelatedFacesBuilder: Deletes the offset relation
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
.
deleteOneLoopList(int) - Method in interface nxopen.tooling.EdgePatchBuilder: Delete one loop list of the index.
deleteOpenings - Variable in class nxopen.uf.UFModl.LinkedExt
deleteOpenings - Variable in class nxopen.uf.UFWave.AskLinkRegionSourcesData
deleteOrphan() - Method in interface nxopen.cae.ElementConnectivityBuilder: Returns the delete orphan node flag, telling whether orphan nodes will be deleted
License requirements: None.
deleteOverride() - Method in interface nxopen.validate.ResultObject: Deletes user override request Override .
DeleteOverridePartBuilder - Interface in nxopen.assemblies: Represents a builder class that deletes override part in the specified design elements.
deleteOverridePartBuilder(Part) - Method in interface nxopen.CollaborativeContentManager: Creates a DeleteOverridePartBuilder
License requirements: nx_4gd_integration ("4th Generation Design")

Created in NX10.0.0
deleteOverstock() - Method in interface nxopen.preferences.RoutingStock: Returns the delete overstock flag during deletion of last stock covered by the overstock
License requirements: routing_base ("Routing Basic")
.
deletePairClearanceZone(DisplayableObject, DisplayableObject) - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder: Delete an existing Clearance Zone between the given pair of objects.
deleteParameter(String) - Method in interface nxopen.mechatronics.ParameterStockBuilder: Delete parameter.
deleteParamSet - Variable in class nxopen.uf.UFCam.Preferences
deleteParms(Tag) - Method in interface nxopen.uf.UFSo: Refer to UF_SO_delete_parms for documentation.
deleteParser(Parser) - Method in interface nxopen.validate.ValidationManager: Deletes a parser.
deletePartAssertion(Tag) - Method in interface nxopen.uf.UFWeight: Refer to UF_WEIGHT_delete_part_assertion for documentation.
deletePartFamily() - Method in interface nxopen.partfamily.TemplateManager: Deletes a part family associated with the manager/owning part
License requirements: solid_modeling ("SOLIDS MODELING")
.
deletePartFamilyAttribute(FamilyAttribute) - Method in interface nxopen.partfamily.TemplateManager: Deletes a given part family attribute
License requirements: solid_modeling ("SOLIDS MODELING")
.
deletePartFamilyInstanceSelectionCriteria() - Method in interface nxopen.assemblies.Component: Deletes InstanceSelectionCriteria associated with this component
License requirements: solid_modeling ("SOLIDS MODELING")

Created in NX9.0.0
deletePartialBlend() - Method in interface nxopen.features.DeleteFaceBuilder: Returns the flag indicating whether to delete the partial blend or not.
deletePartingSurface(Body) - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder: Delete a newly created parting surface.
deletePath(NXObject[]) - Method in interface nxopen.routing.RouteManager: Deletes the given Routing Control Points (RCP), segments, curves, and components.
deletePathCurves() - Method in interface nxopen.features.shipdesign.ProfileSystemBuilder: Deletes the path curves created from a call to ProfileSystemBuilder.createPathCurves() .
deletePipNode(Tag) - Method in interface nxopen.uf.UFSmd: Refer to UF_SMD_delete_pip_node for documentation.
deletePly(int) - Method in interface nxopen.cae.LaminatePlyCollection: Deletes an existing LaminatePly
License requirements: nx_lam_composites ("Laminate Composites")

Created in NX5.0.0
deletePocket(NXObject) - Method in interface nxopen.tooling.ReusablePocketBuilder: Deletes pocket.
deletePoint(Point) - Method in interface nxopen.PointCollection: Deletes a Point by adding the point to the delete list and then updating the delete list without performing a general update.
deletePolesGroup(int) - Method in interface nxopen.geometricutilities.ControlPoleManagerData: Deletes a group of poles
License requirements: studio_free_form ("STUDIO FREE FORM")
.
DeletePolygonFaceBuilder - Interface in nxopen.cae: Builder for Delete Polygon Face
To create a new instance of this class, use AbstractionManager.createDeletePolygonFaceBuilder()

Created in NX8.5.0
deletePortLock(Tag) - Method in interface nxopen.uf.UFRoute: Refer to UF_ROUTE_delete_port_lock for documentation.
deletePositioningTask(PositioningTask) - Method in interface nxopen.assemblies.Subset: Deletes the PositioningTask from this subset.
deletePostJtBuilder(PostJtExportBuilder) - Method in interface nxopen.cae.ResultManager: Delete a nxopen.cae.PostJtExportBuilder object.
deletePostView(int) - Method in interface nxopen.uf.UFSfPost: Refer to UF_SF_POST_delete_post_view for documentation.
deletePretest(PreTestSolution) - Method in interface nxopen.cae.PreTestSolutionCollection: Delete a pre-test
License requirements: nx_correl_base ("FE Correlation")
.
deletePreviewBody(boolean) - Method in interface nxopen.features.shipdesign.PlateSystemBuilder: Deletes the preview body.
deletePreviousDiagrams() - Method in interface nxopen.features.TabNoteCfgBuilder: Returns the delete previous diagrams
License requirements: None.
deletePunchOrDieComponent() - Method in interface nxopen.tooling.BurringInsertBuilder: The action to delete the selected punch or die component
License requirements: None.
deletePunchOrDieComponent() - Method in interface nxopen.tooling.FormingInsertBuilder: The action to delete the selected punch or die component
License requirements: None.
deleteRandomFatigue(DurabilityRandomFatigue) - Method in interface nxopen.cae.DurabilityRandomFatigueCollection: Delete a durability fatigue.
deleteRange(int) - Method in interface nxopen.cam.CutLevel: Delete a range
License requirements: cam_base ("CAM BASE")
.
deleteRecord(BaseRecord) - Method in interface nxopen.cae.ftk.DataManager: Deletes record
License requirements: nx_ftk ("NX Advanced Graphing")
.
deleteRecords(String, int[]) - Method in interface nxopen.cae.AfuManager: Delete multiple AFU Data Records from an AFU file
License requirements: nx_ftk ("NX Advanced Graphing")
.
deleteReferenceData() - Method in interface nxopen.weld.JointmarkBuilder: Delete temporary overlap or top sheet feature.
deleteReferenceSet(ReferenceSet) - Method in interface nxopen.BasePart: Deletes a ReferenceSet object
License requirements: None.
deleteRegion(OrientationRegionItemBuilder) - Method in interface nxopen.features.shipdesign.OrientationDefinitionBuilder: Deletes a previously created region.
deleteRegion(String) - Method in interface nxopen.tooling.MWDefineRegionsBuilder: Delete a region
License requirements: None.
deleteRegionBody() - Method in interface nxopen.features.shipdesign.PlateSystemBuilder: Delete the current region body.
deleteRegions() - Method in interface nxopen.features.shipdesign.PlateBuilder: Deletes regions
License requirements: nx_ship_detail ("Ship Detail Design")
.
deleteReplaceAnnotation(Annotation, Annotation) - Method in interface nxopen.annotations.PmiManager: Deletes or replaces one annotation with another.
deleteRepresentation(Tag) - Method in interface nxopen.uf.UFSmd: Refer to UF_SMD_delete_representation for documentation.
deleteResult(Result) - Method in interface nxopen.cae.ResultManager: Delete a Result object.
deleteResult(ResultObject) - Method in interface nxopen.validate.Parser: Deletes result object, return error code
License requirements: None.
deleteResultAccess(ResultAccess) - Method in interface nxopen.cae.ResultManager: Delete a ResultAccess object.
deleteResultObject(ResultObject) - Method in interface nxopen.validate.Parser: Deletes result object, return error list
License requirements: None.
deleteResultParameters(ResultParameters) - Method in interface nxopen.cae.ResultManager: Delete a ResultParameters object.
deleteResultParametersWithProbe(ResultParametersWithProbe) - Method in interface nxopen.cae.ResultManager: Delete a ResultParametersWithProbe object.
deleteResults() - Method in interface nxopen.positioning.MatingConverter: Removes details from the mating conversion results of the individual constraints that were converted.
deleteRetainedDraftingObjectsInCurrentLayout() - Method in interface nxopen.Part: Deletes all retained drafting objects in the current layout of part that are currently in the "retained" state.
deleteReusableConstraints() - Method in interface nxopen.tooling.AddReusablePart: Deletes constraints for the reusable component
License requirements: None.
deleteReusablePocket() - Method in interface nxopen.tooling.AddReusablePart: Deletes pocket for a reusable component
License requirements: None.
deleteReusablePocket() - Method in interface nxopen.tooling.FastenerAssy: Deletes reusable pocket
License requirements: None.
deleteRockerCam(String) - Method in interface nxopen.tooling.DefineCamBuilder: Delete the rocker cam
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
deleteRootComponent(KinematicComponent) - Method in interface nxopen.sim.KinematicConfigurator: Delete a root component from the KinematicConfigurator object
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")

Created in NX7.5.0
deleteRotaryCam(String) - Method in interface nxopen.tooling.DefineCamBuilder: Delete the rotary cam
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
deleteRset(UFVariant) - Method in interface nxopen.uf.UFLib: Refer to UF_LIB_delete_rset for documentation.
deleteRuleOverride(DesignRuleOverride) - Method in interface nxopen.routing.DesignRuleViolation: Override object will be deleted
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
deleteRunner() - Method in interface nxopen.tooling.RunnerBuilder: Deletes the runner bodies.
deleteRunPath() - Method in interface nxopen.routing.Run: This will delete the Run path and member items in a run
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
deleteSavedResults() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder: Deletes the saved thickness results if the thickness calculation results are no longer needed.
deleteScenario(Tag, String) - Method in interface nxopen.uf.UFSf: Refer to UF_SF_delete_scenario for documentation.
DeleteSeamBuilder - Interface in nxopen.features.shipdesign: Used to create a DeleteSeamBuilder which is used to delete the seams from the ship structural components.
deleteSearchTerms(SearchTerm[]) - Method in interface nxopen.assemblies.SubsetRecipe: Removes the SearchTerm s from the recipe and deletes them.
deleteSections() - Method in interface nxopen.die.AddendumSectionBuilder: Delete addendum sections from AddendumSectionBuilder.sections() .
deleteSections(boolean, DynamicSection[]) - Method in interface nxopen.display.DynamicSectionCollection: Deletes the specified dynamic sections in the part.
deleteSectionSketch(Sketch) - Method in interface nxopen.features.EditCrossSectionBuilder: Remove the curve sketch
License requirements: None.
deleteSegment(int) - Method in interface nxopen.features.sheetmetal.FlexibleCableBuilder: Deletes a cable segment at given index.
deleteSelectedDieBase() - Method in interface nxopen.tooling.DieBaseBuilder: The action to delete selected die base.
deleteSelectedGuideLine() - Method in interface nxopen.tooling.MWDesignGuideLinesBuilder: Button for deleting the selected guide line.
deleteSensor(Sensor) - Method in interface nxopen.cae.responsesimulation.SensorCollection: Deletes an sensor
License requirements: nx_response_anlys ("NX Response Analysis")
.
deleteSequence(Tag) - Method in interface nxopen.uf.UFAssem: Refer to UF_ASSEM_delete_sequence for documentation.
deleteSetup() - Method in interface nxopen.uf.UFSetup: Refer to UF_SETUP_delete_setup for documentation.
deleteSheet(String) - Method in interface nxopen.tooling.AssemblyDrawingBuilder: Delete the sheet
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
deleteSimulation(NXObject, String) - Method in interface nxopen.motion.MotionSession: Delete the Simulation.
deleteSketch() - Method in interface nxopen.features.sheetmetal.FlangeBuilder: Delete the flange sketch
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB") OR nx_ship_detail ("Ship Detail Design")
.
deleteSnapshot() - Method in interface nxopen.DrawingCompareManager: Deletes the cached data for drafting objects.
deleteSolution() - Method in interface nxopen.cae.optimization.DAOSolution: Deletes the optimization solution
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
deleteSolution(SimSolution) - Method in interface nxopen.cae.SimSimulation: Delete the solution
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
deleteSolutionNx(Tag) - Method in interface nxopen.uf.UFSf: Refer to UF_SF_delete_solution_nx for documentation.
deleteSolveoptions(DurabilitySolveOptions) - Method in interface nxopen.cae.DurabilitySolveOptionsCollection: Delete a durability event overrides.
deleteSolverAppendOption(SolverAppendOption) - Method in interface nxopen.cae.CaePart: Deletes a solver append option object for importing the solver specific data into an existing FemPart or SimPart .
deleteSource() - Method in interface nxopen.mechatronics.ObjectSinkBuilder: Returns the option to delete source.
deleteSpecification(String) - Method in interface nxopen.routing.ReuseLibrary: Delete a Specification from the reuse library.
deleteSpreadSheetData() - Method in interface nxopen.PartCleanup: Returns the option that specifies whether to delete all spreadsheets from the part file.
deleteStep(SimSolutionStep) - Method in interface nxopen.cae.SimSolution: Removes a step from the solution
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
deleteStep(Tag) - Method in interface nxopen.uf.UFAssem: Refer to UF_ASSEM_delete_step for documentation.
deleteStepNx(Tag) - Method in interface nxopen.uf.UFSf: Refer to UF_SF_delete_step_nx for documentation.
deleteStocks(NXObject[]) - Method in interface nxopen.routing.StockBrowserBuilder: Deletes the given Routing.Stock or Routing.FittingOverstock
License requirements: routing_base ("Routing Basic")

Created in NX6.0.0
deleteStrength(DurabilityStrength) - Method in interface nxopen.cae.DurabilityStrengthCollection: Delete a durability event strength settings.
deleteSubitem(int) - Method in interface nxopen.uistyler.MultiSelectList: Deletes sub item
License requirements: None.
deleteSubItem(int) - Method in interface nxopen.uistyler.SelectionBox: Deletes sub item
License requirements: None.
deleteSubItem(int) - Method in interface nxopen.uistyler.SingleSelectList: Requests a list entry to be deleted.
deleteSxlineSxseg(Tag) - Method in interface nxopen.uf.UFDraw: Refer to UF_DRAW_delete_sxline_sxseg for documentation.
deleteSymbol(int) - Method in interface nxopen.annotations.ForeshorteningSymbolBuilder: Delete the foreshortening symbol
License requirements: None.
deleteSystemClass(KinematicComponentBuilder.SystemClass) - Method in interface nxopen.sim.KinematicComponentBuilder: Delete a system class
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
deleteTabnotCell(Tag, int, int) - Method in interface nxopen.uf.UFDraw: Deprecated.
The equivalent Open C method has retired
deleteTags() - Method in interface nxopen.mechatronics.OPCClientBuilder: Delete item from the list.
deleteTargetPoints(Point[]) - Method in interface nxopen.features.FitCurveBuilder: Deletes target points
License requirements: features_modeling ("FEATURES MODELING")
.
deleteTemplate(String) - Method in interface nxopen.cae.xyplot.BaseTemplateManager: Deletes template file
License requirements: nx_ftk ("NX Advanced Graphing")
.
deleteTemporaryFacesAndEdges() - Method in interface nxopen.facet.FacetedBodyCollection: Delete any temporary faces and edges on faceted bodies that may have been created in the specified part.
deleteToMark(int, String) - Method in interface nxopen.uf.UFUndo: Refer to UF_UNDO_delete_to_mark for documentation.
deleteToolPath(CAMObject[]) - Method in interface nxopen.cam.CAMSetup: Delete tool path
License requirements: cam_base ("CAM BASE")
.
deleteToolPath(Tag) - Method in interface nxopen.uf.UFOper: Refer to UF_OPER_delete_tool_path for documentation.
deleteTrace(Tag) - Method in interface nxopen.uf.UFMotion: Refer to UF_MOTION_delete_trace for documentation.
deleteTrackChanges() - Method in interface nxopen.DrawingCompareManager: Delete track changes data for drafing objects in the drawing part
License requirements: None.
deleteTrackingPoint(Tag, int) - Method in interface nxopen.uf.UFCutter: Refer to UF_CUTTER_delete_tracking_point for documentation.
deleteTransientDynamicSectionCutData() - Method in interface nxopen.Session: Delete transient data associated with DynamicSectionCut objects in the session.
deleteTransientMeshes(int) - Method in interface nxopen.tooling.MWPartingManagerBuilder: Initialize, reset or delete the transient meshes created in the Wall Thickness Checker.
deleteUde(Tag, UFUde.SetType, UFVariant) - Method in interface nxopen.uf.UFParam: Refer to UF_PARAM_delete_ude for documentation.
deleteUndoMark(int, String) - Method in interface nxopen.Session: Deletes an undo mark.
deleteUndoMarksSetInTaskEnvironment() - Method in interface nxopen.Session: This method deletes all the undo marks that have been created since entering the task environment via Session.beginTaskEnvironment() .
deleteUndoMarksUpToMark(int, String, boolean) - Method in interface nxopen.Session: Deletes all undo marks up to and including the specified mark.
deleteUnusedExpressions() - Method in interface nxopen.PartCleanup: Returns the option that specifies whether to delete expressions that are not used in the part.
deleteUnusedFonts() - Method in interface nxopen.PartCleanup: Returns the option that specifies whether to remove character fonts that are not used in any drafting text in the current part.
deleteUnusedObjects() - Method in interface nxopen.PartCleanup: Returns the option that specifies whether to delete all extraneous objects from the work part
License requirements: None.
deleteUserAttribute(NXObject.AttributeType, String, boolean, Update.Option) - Method in interface nxopen.NXObject: Deletes the first attribute encountered with the given Type, Title.
deleteUserAttributes(NXObject.AttributeType, Update.Option) - Method in interface nxopen.NXObject: Deletes the attributes encountered with the given Type with option to update or not.
deleteUserAttributeWithTitleAndType(Tag, String, int, int, boolean) - Method in interface nxopen.uf.UFAttr: Refer to UF_ATTR_delete_user_attribute_with_title_and_type for documentation.
deleteUserClassification(String) - Method in interface nxopen.sim.KinematicConfigurator: Deletes a user class name from the list of user classes
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
deleteUserClassName(String) - Method in interface nxopen.sim.KinematicComponentBuilder: Deletes a user class from the component
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
deleteValidator(Validator) - Method in interface nxopen.validate.ValidationManager: Deletes a validator.
deleteValue(String) - Method in interface nxopen.options.ChangeList: Delete an option value.
deleteVariableIncrementListData(int) - Method in interface nxopen.cam.CenterlineDrillVariableIncrementBuilder: Delete an existing variable increment
License requirements: cam_base ("CAM BASE")
.
deleteView(DraftingView) - Method in interface nxopen.drawings.SheetDraftingViewCollection: Lets you delete the view
License requirements: None.
deleteView(String) - Method in interface nxopen.tooling.AssemblyDrawingBuilder: Delete view
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
deleteView(Tag) - Method in interface nxopen.uf.UFView: Refer to UF_VIEW_delete for documentation.
deleteViewLabel(Tag) - Method in interface nxopen.uf.UFDraw: Refer to UF_DRAW_delete_view_label for documentation.
deleteViewport(int) - Method in interface nxopen.cae.Post: End all post processing activity in the input view port index
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
deleteViewSet(Tag) - Method in interface nxopen.uf.UFView: Refer to UF_VIEW_delete_view_set for documentation.
deleteViewsInOriginalPart(DraftingView[]) - Method in interface nxopen.drawings.DraftingViewCollection: Deletes views in original part
License requirements: drafting ("DRAFTING")
.
deleteVioByObjRule(Tag, Tag) - Method in interface nxopen.uf.UFRule: Refer to UF_RULE_delete_vio_by_obj_rule for documentation.
deleteVisualEditorData() - Method in interface nxopen.PartCleanup: Returns the option that specifies whether to delete Visual Editor data from the part file.
deleteVnckMachineData() - Method in interface nxopen.cam.CAMSetup: Removes vnck machine data
License requirements: cam_base ("CAM BASE")
.
deleteWarningAlerts(NXObject[]) - Method in interface nxopen.features.FeatureCollection: Delete all warning alerts from the features and if numFrecs is 0 then delete warning alerts from all fetaures in the part
License requirements: None.
deleteWavedFaces() - Method in interface nxopen.tooling.BackingPadBuilder: Delete waved faces to support journamation
License requirements: None.
deleteWeldFaceDefinitions(int[]) - Method in interface nxopen.cae.MeshControlBuilder: Delete weld face definition
License requirements: nx_masterfem ("Finite Element Modeling")
.
deleteWidths() - Method in interface nxopen.PlotColorsWidthsBuilder: Delete drawing sheet widths
License requirements: None.
delFacetFromModel(Tag, int) - Method in interface nxopen.uf.UFFacet: Refer to UF_FACET_del_facet_from_model for documentation.
delimiter() - Method in interface nxopen.preferences.PartDrafting: Returns the delimiter
License requirements: None.
delSegmentsFromList(ISegment[]) - Method in interface nxopen.routing.IPath: Removes segment(s) from the IPath object.
DELTA - Static variable in class nxopen.cae.DurabilityStrainGageAnalyzerBuilder.GageTypeEnum: Delta
DELTA - Static variable in class nxopen.cam.InspectionOperationTransformBuilder.Motion: motion delta
DELTA - Static variable in class nxopen.cam.LaserLinearMove.MotionEnds: Delta
DELTA - Static variable in class nxopen.cam.OperationTransformBuilder.Motion: motion delta
DELTA - Static variable in class nxopen.cam.ToolPathEditorBuilder.MotionMethodType
DELTA - Static variable in class nxopen.cam.TurnEngageRetractBuilder.Types: Delta
DELTA - Static variable in class nxopen.geometricutilities.ReduceSurfaceRadiusBuilder.ReduceValueTypeSpecification
DELTA_ANGLE_DISTANCE - Static variable in class nxopen.cam.TurnAvoidanceReturnBuilder.ReturnPointModes: Point is defined by angle and distance.
DELTA_ANGLE_DISTANCE - Static variable in class nxopen.cam.TurnAvoidanceStartBuilder.StartPointModes: Point is defined by angle and distance.
DELTA_MOVE - Static variable in class nxopen.cam.InspectionMethodBuilder.OperationTypes: Delta Move
DELTA_MOVE - Static variable in class nxopen.cam.TurnAvoidanceReturnBuilder.ReturnPointModes: Point is defined by delta move (X and Y coordinate).
DELTA_MOVE - Static variable in class nxopen.cam.TurnAvoidanceStartBuilder.StartPointModes: Point is defined by delta move (X and Y coordinate).
DELTA_VECTOR_DISTANCE - Static variable in class nxopen.cam.TurnAvoidanceReturnBuilder.ReturnPointModes: Point is defined by vector and distance.
DELTA_VECTOR_DISTANCE - Static variable in class nxopen.cam.TurnAvoidanceStartBuilder.StartPointModes: Point is defined by vector and distance.
DELTA_XYZ - Static variable in class nxopen.cam.InspectionLinearMoveToPointBuilder.PointTypeEnums: Enter in a delta value from a point
DELTA_XYZ - Static variable in class nxopen.geometricutilities.ModlMotion.Options: Move by delta XYZ
deltaAngle - Variable in class nxopen.uf.UFView.LightAttributes
deltaCamber() - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder: Returns the delta camber of wheel.
deltaEnum() - Method in interface nxopen.geometricutilities.ModlMotion: Returns the delta enum
License requirements: None.
DeltaMoveBuilder - Interface in nxopen.cam: Represents the Delta Move Builder
To create a new instance of this class, use MoveCollection.createDeltaMoveBuilder(nxopen.cam.Move)

Created in NX5.0.0
DeltaMoveBuilder.IntentType - Class in nxopen.cam: Move Intent
deltaStaticRadius() - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder: Returns the delta static radius of wheel.
deltaToe() - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder: Returns the delta toe of wheel.
deltaX() - Method in interface nxopen.cam.DeltaMoveBuilder: Returns the delta x
License requirements: None.
deltaX() - Method in interface nxopen.cam.InspectionDeltaMoveBuilder: Returns the delta X coordinate
License requirements: None.
deltaX() - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder: Returns the delta value whic is distance between current point and previous point along X-direction.
deltaX() - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder: Returns the delta x value of wheel center point.
deltaX() - Method in interface nxopen.geometricutilities.ModlMotion: Deprecated.
Deprecated in NX8.5.0. Obtain the expression using ModlMotion.deltaXc() to query or edit it.
deltaXc() - Method in interface nxopen.cam.InspectionOperationTransformBuilder: Returns the delta XC
License requirements: None.
deltaXc() - Method in interface nxopen.cam.LaserLinearMove: Returns the Delta XC
License requirements: None.
deltaXc() - Method in interface nxopen.cam.OperationTransformBuilder: Returns the delta XC
License requirements: None.
deltaXC() - Method in interface nxopen.cam.ToolPathEditorBuilder: Returns the delta xc
License requirements: None.
deltaXc() - Method in interface nxopen.cam.TurnEngageRetractBuilder: Returns the Delta XC
License requirements: None.
deltaXc() - Method in interface nxopen.geometricutilities.ModlMotion: Returns the delta xc
License requirements: None.
deltaXm() - Method in interface nxopen.cam.LaserLinearMove: Returns the Delta XM
License requirements: None.
deltaY() - Method in interface nxopen.cam.DeltaMoveBuilder: Returns the delta y
License requirements: None.
deltaY() - Method in interface nxopen.cam.InspectionDeltaMoveBuilder: Returns the delta Y coordinate
License requirements: None.
deltaY() - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder: Returns the delta value whic is distance between current point and previous point along Y-direction.
deltaY() - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder: Returns the delta y value of wheel center point.
deltaY() - Method in interface nxopen.geometricutilities.ModlMotion: Deprecated.
Deprecated in NX8.5.0. Obtain the expression using ModlMotion.deltaYc() to query or edit it.
deltaYc() - Method in interface nxopen.cam.InspectionOperationTransformBuilder: Returns the delta YC
License requirements: None.
deltaYc() - Method in interface nxopen.cam.LaserLinearMove: Returns the Delta YC
License requirements: None.
deltaYc() - Method in interface nxopen.cam.OperationTransformBuilder: Returns the delta YC
License requirements: None.
deltaYC() - Method in interface nxopen.cam.ToolPathEditorBuilder: Returns the delta yc
License requirements: None.
deltaYc() - Method in interface nxopen.cam.TurnEngageRetractBuilder: Returns the Delta YC
License requirements: None.
deltaYc() - Method in interface nxopen.geometricutilities.ModlMotion: Returns the delta yc
License requirements: None.
deltaYm() - Method in interface nxopen.cam.LaserLinearMove: Returns the Delta YM
License requirements: None.
deltaZ() - Method in interface nxopen.cam.DeltaMoveBuilder: Returns the delta z
License requirements: None.
deltaZ() - Method in interface nxopen.cam.InspectionDeltaMoveBuilder: Returns the delta Z coordinate
License requirements: None.
deltaZ() - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder: Returns the delta value which is distance between current point and previous point long Z-direction.
deltaZ() - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder: Returns the delta z value of wheel center point.
deltaZ() - Method in interface nxopen.geometricutilities.ModlMotion: Deprecated.
Deprecated in NX8.5.0. Obtain the expression using ModlMotion.deltaZc() to query or edit it.
deltaZc() - Method in interface nxopen.cam.InspectionOperationTransformBuilder: Returns the delta ZC
License requirements: None.
deltaZc() - Method in interface nxopen.cam.LaserLinearMove: Returns the Delta ZC
License requirements: None.
deltaZc() - Method in interface nxopen.cam.OperationTransformBuilder: Returns the delta ZC
License requirements: None.
deltaZC() - Method in interface nxopen.cam.ToolPathEditorBuilder: Returns the delta zc
License requirements: None.
deltaZc() - Method in interface nxopen.geometricutilities.ModlMotion: Returns the delta zc
License requirements: None.
deltaZm() - Method in interface nxopen.cam.LaserLinearMove: Returns the Delta ZM
License requirements: None.
DEMO_DIALOG_OBJECT_COUNT - Static variable in class nxopen.uf.UFConstants
demoCylinderList() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder: Returns the list of CloseRangeDemoCylinderListItemBuilder defining the demo cylinder parameters.
demoldGroup() - Method in interface nxopen.cae.optimization.TBSShapeLinkCondition: Returns the surface nodes of demolding area
License requirements: None.
denominator() - Method in interface nxopen.drawings.ViewScaleBuilder: Returns the scale denominator
License requirements: None.
DENSE_GRID - Static variable in class nxopen.cae.xyplot.GridStyle: Display dense grid
denseColor() - Method in interface nxopen.cae.xyplot.BaseGridLayoutStyleSetting: Returns the grid dense line color
License requirements: None.
density() - Method in interface nxopen.Body: Returns the solid density of the body.
density() - Method in interface nxopen.geometricanalysis.SolidDensity: Returns the Solid Density.
density() - Method in interface nxopen.geometricutilities.CombOptionsBuilder: Returns the density
License requirements: None.
DENSITY - Static variable in class nxopen.partfamily.FamilyAttribute.AttrType: density attribute
density() - Method in interface nxopen.preferences.PartModeling: Returns the density.
density - Variable in class nxopen.uf.UFDisp.ConeheadAttrbSTag
density - Variable in class nxopen.uf.UFWeight.Properties
DENSITY_TYPE - Static variable in class nxopen.Part.PartFamilyAttrType: Deprecated.

density attribute
densityMove() - Method in interface nxopen.cae.optimization.TBSTopologySensitivityOptimizationParameters: Returns the move limit on design variables
License requirements: None.
densityState - Variable in class nxopen.uf.UFWeight.Properties
densityType - Variable in class nxopen.uf.UFSf.EfConnInfo
densityType - Variable in class nxopen.uf.UFSf.Sf1dMeshData
densityUnit() - Method in interface nxopen.preferences.PartModeling: Returns the density unit
License requirements: None.
densityUpdateOption() - Method in interface nxopen.cae.optimization.TBSTopologySensitivityOptimizationParameters: Returns the parameter for how the densities are updated
License requirements: None.
DEPARTURE - Static variable in class nxopen.cam.MoveBuilder.Motion: Departure
departure() - Method in interface nxopen.cam.PathDisplayColors: Returns the color departure
License requirements: None.
DEPARTURE_ONLY - Static variable in class nxopen.cam.WedmStatusControlCiBuilder.StatusTypes: departure only
departureClearanceBuilder() - Method in interface nxopen.cam.NcmTransferBuilder: Returns the departure clearance
License requirements: None.
departureDistance() - Method in interface nxopen.cam.ChipControl: Returns the Departure Distance
License requirements: None.
departureHeightBuilder() - Method in interface nxopen.cam.NcmTransferBuilder: Returns the departure height builder
License requirements: None.
departureLengthBuilder() - Method in interface nxopen.cam.NcmTransferBuilder: Returns the departure length builder
License requirements: None.
departureMethod() - Method in interface nxopen.cam.NcmTransferBuilder: Returns the departure method
License requirements: None.
departurePathMode() - Method in interface nxopen.cam.TurnAvoidanceDepartureBuilder: Returns the departure path mode
License requirements: None.
departurePathPointsListBuilder() - Method in interface nxopen.cam.TurnAvoidanceDepartureBuilder: Returns the avoidance path points list builder
License requirements: None.
departurePostCommands() - Method in interface nxopen.cam.NcmTransferBuilder: Returns the departure post commands
License requirements: None.
departureToolAxis() - Method in interface nxopen.cam.NcmTransferBuilder: Returns the departure tool axis
License requirements: None.
departureToolAxisOption() - Method in interface nxopen.cam.NcmTransferBuilder: Returns the tool axis option for departure
License requirements: None.
departureVector() - Method in interface nxopen.cam.NcmTransferBuilder: Returns the departure vector
License requirements: None.
depDispType() - Method in interface nxopen.fields.DisplayPropertiesBuilder: Returns the dep disp type
License requirements: None.
depDomColor() - Method in interface nxopen.fields.DisplayPropertiesBuilder: Returns the dep dom color
License requirements: None.
DEPENDENCIES - Static variable in class nxopen.Information.DisplayFeatureType: Displays dependencies information.
DEPENDENCY_EXISTS - Static variable in class nxopen.uf.UFConstants
DependencyCreatorBuilder - Interface in nxopen.mechatronics: Represents a DependencyCreatorBuilder builder.
DEPENDENT - Static variable in class nxopen.fields.FieldVariable.Type
DEPENDENT_OBJECTS - Static variable in class nxopen.uf.UFView.CycleObjects
dependentDisplay() - Method in interface nxopen.View: Returns an object to perform all view dependent display operations .
dependentEdgeDensitySize() - Method in interface nxopen.cae.MeshControlDisplayOptionsBuilder: Returns the dependent edge density size
License requirements: None.
dependentfeatures - Variable in class nxopen.geometricutilities.EntityUsageInfo.DependentFeaturesData: dependent features
DependentFeaturesData() - Constructor for class nxopen.geometricutilities.EntityUsageInfo.DependentFeaturesData
dependentFileSaveAsOption() - Method in interface nxopen.pdm.PartFromPartBuilder: Returns the dependent files to save during the save as operation
Deprecated in NX10 for "Save As of master parts" operation.
dependentFileSaveAsOption() - Method in interface nxopen.pdm.PartOperationBuilder: Deprecated.
Deprecated in NX10.0.0. Use PartOperationCopyBuilder.dependentFilesToCopyOption() instead
dependentFilesToCopyOption() - Method in interface nxopen.pdm.PartOperationCopyBuilder: Returns the Dependent files Save As option.
DependentMesh - Interface in nxopen.cae: Represents Mesh Recipe
To create or edit an instance of this class, use DependentMeshBuilder

Created in NX5.0.0
DependentMeshBuilder - Interface in nxopen.cae: Represents a Mesh2d
To create a new instance of this class, use MeshManager.createDependentMeshBuilder(nxopen.cae.DependentMesh)

Created in NX5.0.0
DependentMeshBuilder.MeshType - Class in nxopen.cae: The mesh type for face dependency
DependentMeshListItemBuilder - Interface in nxopen.cae: Represents a DependentMeshListItemBuilder
To create a new instance of this class, use DependentMeshBuilder.createNewListItem(nxopen.cae.CAEEdge, nxopen.cae.CAEEdge, boolean)

Created in NX5.0.0
DependentMeshListItemBuilderList - Interface in nxopen.cae: Represents a list of objects.
dependentObject() - Method in interface nxopen.mechatronics.DependencyCreatorBuilder: Returns the dependent object.
depLabelValues() - Method in interface nxopen.fields.DisplayPropertiesBuilder: Returns the dep label values
License requirements: None.
depSelColor() - Method in interface nxopen.fields.DisplayPropertiesBuilder: Returns the dep sel color
License requirements: None.
depSymbolSize() - Method in interface nxopen.fields.DisplayPropertiesBuilder: Returns the dep symbol size
License requirements: None.
DEPTH - Static variable in class nxopen.annotations.HoleCalloutSettingsBuilder.Parametertype
DEPTH - Static variable in class nxopen.annotations.HoleTableSettingsContentBuilder.Content: Depth
depth - Variable in class nxopen.assemblies.ClearanceSet.InterferenceData: depth of penetration
depth() - Method in interface nxopen.cae.xyplot.BarStyle3DSetting: Returns the bar depth.
depth() - Method in interface nxopen.cam.HoleBossSet: Returns the Depth
License requirements: None.
depth() - Method in interface nxopen.cam.ReliefCut: Returns the relief cut depth
License requirements: None.
DEPTH - Static variable in class nxopen.cam.ReliefCut.Modes: Depth
DEPTH - Static variable in class nxopen.cam.TurnGrooveCornerControl.ReliefPlungeTypes: Groove Corner Control Relief Plunge Type is Depth.
depth() - Method in interface nxopen.die.FingerClearanceNotchBuilder: Returns the expression containing the value for the clearance to provide into the target solid.
depth() - Method in interface nxopen.die.HandlingCoreBuilder: Returns the expression containing the value to use for the extrusion depth when creating the core.
depth() - Method in interface nxopen.die.HandlingCoreChildBuilder: Returns the depth of the handling core.
depth() - Method in interface nxopen.die.HandlingCoreParentBuilder: Returns the depth of handling cores.
depth() - Method in interface nxopen.die.HoleChildBuilder: Returns the depth of the die hole.
depth() - Method in interface nxopen.die.HoleParentBuilder: Returns the depth of die holes.
depth() - Method in interface nxopen.die.KeywayChildBuilder: Returns the depth of the keyway.
depth() - Method in interface nxopen.die.KeywayParentBuilder: Returns the depth of keyways.
depth() - Method in interface nxopen.die.PierceHoleChildBuilder: Returns the depth of the pierce hole
License requirements: ug_die_design ("Die Design")
.
depth() - Method in interface nxopen.die.PierceHoleParentBuilder: Returns the depth of pierce holes
License requirements: ug_die_design ("Die Design")
.
depth() - Method in interface nxopen.features.BridgeCurveBuilder: Deprecated.
Deprecated in NX8.5.0. Use BridgeCurveBuilderEx instead.
depth - Variable in class nxopen.features.Hole.CounterboreHoleData: Expression for depth
depth - Variable in class nxopen.features.Hole.CountersinkHoleData: Expression for depth
depth() - Method in interface nxopen.features.Hole: Returns the depth of the hole.
depth - Variable in class nxopen.features.Hole.SimpleHoleData: Expression for depth
depth() - Method in interface nxopen.features.sheetmetal.AeroJoggleBuilder: Returns the depth expression.
depth() - Method in interface nxopen.features.sheetmetal.GussetBuilder: Returns the depth
This value is used for the automatic profile Gussets.
depth() - Method in interface nxopen.features.sheetmetal.LouverBuilder: Returns the depth of the louver
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
depth() - Method in interface nxopen.features.sheetmetal.NormalCutoutBuilder: Returns the depth of the cutout.
depth() - Method in interface nxopen.features.shipdesign.PlateChamferBuilder: Returns the depth
License requirements: None.
DEPTH - Static variable in class nxopen.features.shipdesign.PlateChamferBuilder.OffsetMethod: Use depth parameter to define ramp
DEPTH - Static variable in class nxopen.features.StyledBlendBuilder.StyledBlendShapeControlType: Depth control
depth() - Method in interface nxopen.geometricutilities.BoundaryDefinitionBuilder: Returns the region depth
License requirements: None.
depth() - Method in interface nxopen.geometricutilities.ConicCrossSection: Returns the depth expression for the conic section with face blend
License requirements: None.
depth() - Method in interface nxopen.geometricutilities.DepthSkewBuilder: Returns the depth
License requirements: None.
depth - Variable in class nxopen.uf.UFCamgeom.CustomPoint
depth - Variable in class nxopen.uf.UFModl.AskBallSlotParmsData
depth - Variable in class nxopen.uf.UFModl.AskDovetailSlotParmsData
depth - Variable in class nxopen.uf.UFModl.AskRectSlotParmsData
depth - Variable in class nxopen.uf.UFModl.AskUSlotParmsData
depth - Variable in class nxopen.uf.UFModl.SmholeData
depth - Variable in class nxopen.uf.UFModl.SmpunchData
depth - Variable in class nxopen.uf.UFModl.SmslotData
depth - Variable in class nxopen.uf.UFModl.StycornerCrvOpt
depth - Variable in class nxopen.uf.UFModlFeatures.AskCylPocketParmsData
depth - Variable in class nxopen.uf.UFModlFeatures.AskSimpleHoleParmsData
depth - Variable in class nxopen.uf.UFModlFeatures.AskTaperHoleParmsData
depth - Variable in class nxopen.uf.UFPath.LevelMarker
depth1 - Variable in class nxopen.uf.UFModlFeatures.AskCBoreHoleParmsData
depth1 - Variable in class nxopen.uf.UFModlFeatures.AskCSunkHoleParmsData
depth2 - Variable in class nxopen.uf.UFModlFeatures.AskCBoreHoleParmsData
DEPTH_AND_ANGLE - Static variable in class nxopen.cam.ThreadTurningBuilder.DepthOptionTypes: Depth and Angle
DEPTH_AND_SKEW - Static variable in class nxopen.features.StyledCornerBuilder.ShapeControlMethodsTypes: Depth and skew
DEPTH_FIRST - Static variable in class nxopen.cam.CutParametersCutOrderTypes: depth first type
DEPTH_FIRST_ALWAYS - Static variable in class nxopen.cam.CutParametersCutOrderTypes: depth first always type
DEPTH_FIT - Static variable in class nxopen.annotations.HoleTableSettingsContentBuilder.Content: DepthFit
DEPTH_PASSES_FIRST - Static variable in class nxopen.cam.MultiplePassesBuilder.OrderTypes: Depth First
DEPTH_SKEW - Static variable in class nxopen.features.BridgeCurveBuilderEx.ShapeControlMethods: Shape using depth and skew value
DEPTH_SMHOLE - Static variable in class nxopen.uf.UFModl.SmholeType
DEPTH_SMSLOT - Static variable in class nxopen.uf.UFModl.SmslotType
DEPTH_TOLERANCE_TYPE - Static variable in class nxopen.uf.UFGdt.ToleranceType
DEPTH_VALUE - Static variable in class nxopen.drawings.ViewProjectionPlaneBuilder.PlaneOptions: Get plane using source view and depth value
depthBuilder() - Method in interface nxopen.cam.HoleBossSet: Returns the depth builder
License requirements: None.
depthDimension() - Method in interface nxopen.features.ShelfBuilder: Returns the depth dimension
License requirements: None.
depthDistance() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder: Returns the depth distance
License requirements: None.
depthDistance() - Method in interface nxopen.cam.InspectionDeltaMoveBuilder: Returns the depth distance
License requirements: None.
depthDistance() - Method in interface nxopen.cam.InspectionLinear5axisMoveToPointBuilder: Returns the depth distance
License requirements: None.
depthDistance() - Method in interface nxopen.cam.InspectionLinearMoveToPointBuilder: Returns the depth distance
License requirements: None.
depthDistance() - Method in interface nxopen.cam.InspectionMeasurePointBuilder: Returns the depth distance
License requirements: None.
depthDistance() - Method in interface nxopen.cam.InspectionMethodBuilder: Returns the depth distance
License requirements: None.
depthDistance() - Method in interface nxopen.cam.InspectionScanArcBuilder: Returns the depth distance
License requirements: None.
depthDistance() - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder: Returns the depth distance
License requirements: None.
depthDistance() - Method in interface nxopen.cam.InspectionScanCurveBuilder: Returns the depth distance
License requirements: None.
depthDistance() - Method in interface nxopen.cam.InspectionScanHelixBuilder: Returns the depth distance
License requirements: None.
depthDistance() - Method in interface nxopen.cam.InspectionScanLineBuilder: Returns the depth distance
License requirements: None.
depthDistance() - Method in interface nxopen.cam.InspectionUVGridBuilder: Returns the depth distance
License requirements: None.
depthEndPoint() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder: Returns the depth end point
License requirements: None.
depthIncrement() - Method in interface nxopen.cam.MultiplePassesBuilder: Returns the Depth Increment
License requirements: None.
depthLaw() - Method in interface nxopen.features.StyledBlendBuilder: Returns the depth
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
depthLawControl() - Method in interface nxopen.geometricutilities.ConicCrossSection: Returns the Depth Law builder
License requirements: None.
depthLimit() - Method in interface nxopen.cam.HoleBossGeom: Deprecated.
Deprecated in NX8.0.0. Use HoleBossSet.depthLimit() instead.
depthLimit() - Method in interface nxopen.cam.HoleBossSet: Returns the Depth Limit types
License requirements: None.
depthMeasurementDatum() - Method in interface nxopen.annotations.HoleTableSettingsFormatBuilder: Returns the depth measurement datum
License requirements: None.
depthMethod() - Method in interface nxopen.cam.InspectionDeltaMoveBuilder: Returns the depth method
License requirements: None.
depthMethod() - Method in interface nxopen.cam.InspectionLinear5axisMoveToPointBuilder: Returns the depth method
License requirements: None.
depthMethod() - Method in interface nxopen.cam.InspectionLinearMoveToPointBuilder: Returns the depth method
License requirements: None.
depthMethod() - Method in interface nxopen.cam.InspectionMeasurePointBuilder: Returns the depth method
License requirements: None.
depthMethod() - Method in interface nxopen.cam.InspectionScanArcBuilder: Returns the depth method
License requirements: None.
depthMethod() - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder: Returns the depth method
License requirements: None.
depthMethod() - Method in interface nxopen.cam.InspectionScanCurveBuilder: Returns the depth method
License requirements: None.
depthMethod() - Method in interface nxopen.cam.InspectionScanHelixBuilder: Returns the depth method
License requirements: None.
depthMethod() - Method in interface nxopen.cam.InspectionScanLineBuilder: Returns the depth method
License requirements: None.
depthMethod() - Method in interface nxopen.cam.InspectionUVGridBuilder: Returns the depth method
License requirements: None.
depthMethod() - Method in interface nxopen.features.ShelfBuilder: Returns the depth method
License requirements: None.
depthMethod() - Method in interface nxopen.features.StepBuilder: Returns the selected step depth method
License requirements: None.
depthMode() - Method in interface nxopen.cam.BladeCutLevels: Returns the depth mode
License requirements: None.
depthOfFieldToggle() - Method in interface nxopen.display.CameraBuilder: Returns the depth of field toggle
License requirements: None.
depthOffset() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder: Returns the depth offset value
License requirements: None.
depthOption() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder: Returns the depth option
License requirements: None.
depthOption() - Method in interface nxopen.cam.ThreadTurningBuilder: Returns the depth option
License requirements: None.
depthOption() - Method in interface nxopen.geometricutilities.ConicCrossSection: Returns the depth option for the conic section with face blend
License requirements: None.
depthPerCut() - Method in interface nxopen.cam.AreaMillingSteepContainment: Returns the builder of area milling depth per cut
License requirements: None.
depthPerCut() - Method in interface nxopen.cam.BladeCutLevels: Returns the depth per cut
License requirements: None.
depthPerCut() - Method in interface nxopen.cam.FlowCutSteepContainment: Returns the builder of flow cut depth per cut
License requirements: None.
depthPerCut() - Method in interface nxopen.cam.PlanarOperationBuilder: Returns the depth per cut builder (inheritable double)
License requirements: None.
depthPerRevolution() - Method in interface nxopen.cam.CylinderMillingBuilder: Returns the Depth per Revolution
License requirements: None.
depthReference() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder: Returns the depth reference
License requirements: None.
depthresult - Variable in class nxopen.assemblies.ClearanceSet.InterferenceData: result status of penetration depth calculation
depthRootOpeningNumberOfWelds() - Method in interface nxopen.annotations.LineWeldSideData: Returns the depth or root opening or number of welds as the case may be
License requirements: None.
depthSide() - Method in interface nxopen.features.sheetmetal.LouverBuilder: Returns the depth side for the louver.
depthSide() - Method in interface nxopen.features.sheetmetal.NormalCutoutBuilder: Returns the depth side for the normal cutout.
depthSkew() - Method in interface nxopen.features.BridgeCurveBuilderEx: Returns the depth skew
License requirements: None.
depthSkew() - Method in interface nxopen.features.EdgeSymmetryBuilder: Returns the depth and skew value
License requirements: None.
depthSkew() - Method in interface nxopen.features.MatchEdgeBuilder: Returns the depth skew
License requirements: None.
DepthSkewBuilder - Interface in nxopen.geometricutilities: This class provides ability to specify a depth and a skew value.
depthSortedWireframe() - Method in interface nxopen.preferences.VisualizationLine: Returns the depth sorted wireframe.
depthStepMethod() - Method in interface nxopen.cam.MultiplePassesBuilder: Returns the Depth Step Method
License requirements: None.
depthTitle - Variable in class nxopen.die.HoleChildBuilder.HoleAttributesData: Title for depth attribute.
depthTitle - Variable in class nxopen.die.HoleParentBuilder.HoleAttributesData: Title for depth attribute.
DepthTolerance() - Constructor for class nxopen.uf.UFGdt.DepthTolerance
DepthTolerance(double, UFGdt.ToleranceValue, UFGdt.ToleranceValue, UFGdt.TolFormat, int) - Constructor for class nxopen.uf.UFGdt.DepthTolerance
depthType() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder: Returns the depth setting
License requirements: None.
depthType() - Method in interface nxopen.cam.ProbeCalibrateStylusMoveBuilder: Returns the depth type
License requirements: None.
depthType() - Method in interface nxopen.cam.ProbeInspectBorebossMoveBuilder: Returns the depth type
License requirements: None.
depthType() - Method in interface nxopen.features.sheetmetal.DimpleBuilder: Returns the Direction in which the Dimple is punched.
depthType() - Method in interface nxopen.features.sheetmetal.DrawnCutoutBuilder: Returns the Direction in which the Drawn Cutout is punched.
depthType() - Method in interface nxopen.features.sheetmetal.NormalCutoutBuilder: Returns the depth type for the normal cutout.
depthUnit() - Method in interface nxopen.cam.ReliefCut: Returns the relief cut depth unit
License requirements: None.
depthValue() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder: Returns the depth value
License requirements: None.
depthValue() - Method in interface nxopen.drawings.ViewProjectionPlaneBuilder: Returns the depth value
License requirements: None.
depUdeSet() - Method in interface nxopen.cam.NcmTransferBuilder: Returns the Depature UDE Set
License requirements: cam_base ("CAM BASE")
.
derivatives - Variable in class nxopen.uf.UFEval.EvaluateData
derivebeamres() - Method in interface nxopen.cae.ResultVariable: Returns the Derive beam results
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
DERIVED - Static variable in class nxopen.die.DrawBeadBuilder.FemaleDepthTypes: The female depth is derived from the male bead (Max Male Depth + Constant).
DERIVED - Static variable in class nxopen.die.DrawBeadBuilder.FemaleWidthTypes: The female width is derived from the male (Male Width + 2(Sheet Metal Thickness + Clearance)).
DERIVED - Static variable in class nxopen.die.DrawBeadSegmentBuilder.MaleBeadWidthTypes: The male bead width is derived from the width specified for the female.
derived() - Method in interface nxopen.weld.DatumCommonBuilder: Returns the indicator if this should be marked as a derived from another datum.
derived() - Method in interface nxopen.weld.DatumIconBuilder: Returns the indicator if this datum was derived from another datum.
DERIVED_COMPONENT - Static variable in class nxopen.cae.Result.TensorDerivedAbsolute: Absolute of current derived components
derivedDatum() - Method in interface nxopen.weld.DatumPinBuilder: Returns the derived datum
License requirements: None.
derivedDatum() - Method in interface nxopen.weld.DatumSurfaceBuilder: Returns the derived datum
License requirements: None.
desc - Variable in class nxopen.uf.UFUgmgr.VariantConfiguration
DESCENDING - Static variable in class nxopen.blockstyler.Tree.ColumnSortOption: Descending
descr - Variable in class nxopen.uf.UFLayer.CategoryInfo
description() - Method in interface nxopen.assemblies.productinterface.PropertyBuilder: Returns the description of a product interface provided by users
License requirements: None.
description() - Method in interface nxopen.assemblies.Subset: Returns the description of this subset.
description - Variable in class nxopen.cae.BaseResultType.AskComponentsData
description() - Method in interface nxopen.cae.LaminatePly: Returns the ply description
License requirements: None.
description - Variable in class nxopen.cae.Result.AskResultLoadcaseValueData
description - Variable in class nxopen.cae.Result.AskResultTypesData
description - Variable in class nxopen.cae.ResultAccess.AskResultComponentsData
description() - Method in interface nxopen.cae.SimConditionTimeStep: Returns the Time Step description
License requirements: None.
description() - Method in interface nxopen.cae.SimLoadRecipe: Returns the description of a SimLoadRecipe .
description - Variable in class nxopen.cam.CAMSetup.PartMaterialData
description - Variable in class nxopen.cam.FeatureGeomBuilder.MaterialData
description() - Method in interface nxopen.cam.OperationBuilder: Returns the description
License requirements: cam_base ("CAM BASE")
.
description - Variable in class nxopen.cam.ToolBuilder.MaterialData
description() - Method in interface nxopen.drawings.MarkAsTemplateBuilder: Returns the detailed description for each template.
description() - Method in interface nxopen.ErrorInfo: Returns a description of the error
License requirements: None.
description() - Method in interface nxopen.Expression: Returns the description of the expression.
description() - Method in interface nxopen.features.shipdesign.SteelDistributionBuilder: Returns the description
License requirements: None.
description() - Method in interface nxopen.features.vehicledesign.BaseDataPassengerBuilder: Returns the name or short description of the passenger.
description() - Method in interface nxopen.formboard.UpdateDiscrepancy: Returns the description string of the discrepancy.
description() - Method in interface nxopen.layer.Category: Returns the category's description, if one exists
License requirements: None.
description() - Method in interface nxopen.motion.MotionSolutionBuilder: Returns the description
License requirements: None.
description() - Method in interface nxopen.PhysicalMaterialBuilder: Returns the material description value.
description() - Method in interface nxopen.preferences.RoutingApplicationView: Returns the application view description.
DESCRIPTION - Static variable in class nxopen.preferences.SessionAssemblies.PartNameOption
description() - Method in interface nxopen.routing.DesignRule: Returns the description of the design rule is returned
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
description() - Method in interface nxopen.Step203Creator: Returns the description
License requirements: None.
description() - Method in interface nxopen.Step214Creator: Returns the description
License requirements: None.
description() - Method in interface nxopen.tooling.FlowAnalysisBuilder: Returns the size information of injection gates
License requirements: None.
Description() - Constructor for class nxopen.uf.UFGdt.Description
Description(String, String) - Constructor for class nxopen.uf.UFGdt.Description
description - Variable in class nxopen.uf.UFGdt.Description
description - Variable in class nxopen.uf.UFGdt.DrfData
description - Variable in class nxopen.uf.UFRoute.SystemInterface
description - Variable in class nxopen.uf.UFSmd.FormOutput
description - Variable in class nxopen.uf.UFSmd.SeqInput
description - Variable in class nxopen.uf.UFSmd.SeqOutput
description() - Method in interface nxopen.visualreporting.Condition: Returns the description for this Condition .
DESCRIPTION_MAX_LENGTH - Static variable in interface nxopen.layer.Category
descriptions - Variable in class nxopen.uf.UFClone.AskCvtCallbacksData
descriptions - Variable in class nxopen.uf.UFClone.AskNtfyCallbacksData
descriptions - Variable in class nxopen.uf.UFModlGeneral.AskExpDescOfFeatData
descriptions - Variable in class nxopen.uf.UFModlGeneral.AskExpDescOfFrecData
descriptions - Variable in class nxopen.uf.UFModlGeneral.AskRpoDescOfFeatData
descriptions - Variable in class nxopen.uf.UFModlGeneral.AskRpoDescOfFrecData
DESCRIPTIVE_PART_NAME_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption: Descriptive part name
descriptiveModifier() - Method in interface nxopen.annotations.PartIdentificationBuilder: Returns the descriptive modifier
License requirements: None.
descriptiveName() - Method in interface nxopen.tooling.ReusableObject: Returns the descriptive name
License requirements: None.
descriptiveName() - Method in interface nxopen.tooling.SpreadsheetDataParameter: Returns the descriptive name of the parameter
License requirements: None.
descriptorCharxType() - Method in interface nxopen.routing.RoutePartDescriptor: Returns the charx type for the part descriptor used by Routing.
descriptorName() - Method in interface nxopen.cae.CaeRegion: Returns the name of the region descriptor
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
descriptorName() - Method in interface nxopen.cae.GeneralGeometryBeamSectionBuilder: Returns the section descriptor name
License requirements: None.
descriptorName() - Method in interface nxopen.cae.SimBC: Returns the name of the bc
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
descriptorName() - Method in interface nxopen.cae.SimLoadSet: Returns the name of the load set descriptor
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
descriptorName() - Method in interface nxopen.cae.SimRecipe: Returns the descriptor name defines the sim recipe object type.
descriptorName() - Method in interface nxopen.cae.StandardBeamSectionBuilder: Returns the section descriptor name
License requirements: None.
descriptorName() - Method in interface nxopen.cae.UserDefinedSolidBeamSectionBuilder: Returns the section descriptor name
License requirements: None.
descriptorSourceType() - Method in interface nxopen.routing.RoutePartDescriptor: Returns the descriptor type for the part descriptor used by Routing.
DESELECT - Static variable in class nxopen.blockstyler.Wizard.SubNodeAction: Sub-node has been deselected.
deselect(int) - Method in interface nxopen.uistyler.MultiSelectList: Requests a list entry to be deselected.
DESELECT_ALL - Static variable in class nxopen.assemblies.AssembliesEventTypes: deselect all that is currently selected event
deselectAllEntities() - Method in interface nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder: This command deselects all the entities.
deselectAllFields() - Method in interface nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder: This command deselects all the fields.
deselectColoredRegion(int) - Method in interface nxopen.geometricutilities.ColorCodedRegionBuilder: Deselect Colored Region
License requirements: None.
deselectCurves(NXObject[]) - Method in interface nxopen.features.CurveFinderBuilder: Removes curves from collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
deselectEntities(NXObject[]) - Method in interface nxopen.features.FaceRecognitionBuilder: Removes entities from collector
License requirements: gateway ("UG GATEWAY")
.
deselectFaces(DisplayableObject[]) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder: Deselects faces
License requirements: studio_analyze ("STUDIO ANALYZE")
.
deselection - Variable in class nxopen.Selection.SelectionDescriptor
deselectPoles(int, int[], Point[]) - Method in interface nxopen.geometricutilities.ControlPoleManagerData: Removes selected pole
License requirements: studio_free_form ("STUDIO FREE FORM")
.
deselectPortion(Point3d, NXObject, NXObject, Section.DeselectOption) - Method in interface nxopen.Section: Deselects Portion of the section depending on the option provided.
deselectRegion(Point3d) - Method in interface nxopen.SketchAssociativeTrimBuilder: The region corresponding to help point will be delsected from being kept/discarded depending on trim type
License requirements: solid_modeling ("SOLIDS MODELING")
.
deselectSubItem(int) - Method in interface nxopen.uistyler.SelectionBox: Requests a list entry to be deselected.
deselectSubItem(int) - Method in interface nxopen.uistyler.SingleSelectList: Requests a list entry to be deselected.
deselectSymmetryReference(NXObject) - Method in interface nxopen.features.CurveFinderBuilder: Deselect entity for symmetry reference
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
deselectTrackingPoint(Tag, String) - Method in interface nxopen.uf.UFOper: Refer to UF_OPER_deselect_tracking_point for documentation.
DESIGN_AREA - Static variable in class nxopen.cae.optimization.TBSGroupDefinition.DefinitionType: Defines a group refer to design area
DESIGN_CONTROL_ELEMENT - Static variable in class nxopen.assemblies.CollaborativeContentType: Design Control Element
DESIGN_CONTROL_ELEMENT - Static variable in class nxopen.FileNewTemplateType: Specifies a file new design control element template
DESIGN_CONTROL_ELEMENT - Static variable in class nxopen.issue.IssueAttachment.Type: Design Control Element type
DESIGN_CONTROL_ELEMENT - Static variable in class nxopen.pdm.DesignElementRevision.DesignElementCategory
DESIGN_DRF - Static variable in class nxopen.cam.InspectionMeasDataBuilder.DisplayTransformTypes: Design DRF
DESIGN_ELEMENT - Static variable in class nxopen.assemblies.ComponentAssembly.CheckinCheckoutOption: Checks in or Checks out the design element
DESIGN_ELEMENT - Static variable in class nxopen.assemblies.FindInCollaborativeDesign.ObjectType: Search for Design Elements
DESIGN_ELEMENT - Static variable in class nxopen.FileNewTemplateType: Specifies a file new design element template
DESIGN_FEATURE - Static variable in class nxopen.assemblies.CollaborativeContentType: Design Feature
DESIGN_FEATURE - Static variable in class nxopen.FileNewTemplateType: Specifies a file new design feature template (actually has no file)
DESIGN_MODE - Static variable in class nxopen.features.shipdesign.CompareModeBuilder.CompareMode
DESIGN_MODE - Static variable in class nxopen.features.shipdesign.SetModeBuilder.DesMfgMode
DESIGN_RULES - Static variable in class nxopen.routing.electrical.ElectricalStockDevice.AutoRouteSel
DESIGN_TOOLS - Static variable in class nxopen.tooling.DieBaseBuilder.Types: die base design tools
designAngle - Variable in class nxopen.uf.UFSmd.SeqOutput
designArea() - Method in interface nxopen.cae.optimization.TBSOptimizationSolution: Returns the design area that will be modified during optimization
License requirements: None.
designConstraint() - Method in interface nxopen.cae.optimization.DAOSolution: Returns the optimization design constraint collection.
designCycles - Variable in class nxopen.uf.UFSf.AskDursolNxData
designData() - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder: Returns the design data of the wheel.
DesignElementBuilder - Interface in nxopen.assemblies: Represents a builder class that performs various design element operations.
DesignElementBuilder.EditActionType - Class in nxopen.assemblies: Represents the edit action on a design element
DesignElementBuilder.LayerOptionType - Class in nxopen.assemblies: Represents the layer option of a design element
DesignElementBuilder.OperationType - Class in nxopen.assemblies: Represents an operation type that can be performed on a design element
DesignElementBuilder.PositionData - Class in nxopen.assemblies: This class holds the data returned from DesignElementBuilder.getPosition()
DesignElementBuilder.PositioningOption - Class in nxopen.assemblies: Represents the positioning option of a design element.
DesignElementBuilder.ReferenceSetType - Class in nxopen.assemblies: Represents the reference set of a design element
DesignElementBuilder.SaveAsActionType - Class in nxopen.assemblies: Represents the save as action on a design element
DesignElementBuilder.StateType - Class in nxopen.assemblies: Represents the state of a design element
designElementRevision() - Method in interface nxopen.assemblies.Component: Returns the DesignElementRevision that corresponds to this component.
DesignElementRevision - Interface in nxopen.pdm: Represents the design element revision in the database.
DesignElementRevision.DesignElementCategory - Class in nxopen.pdm: Represents the category for this design element revision.
DesignElementRevision.TransformData - Class in nxopen.pdm: This class holds the data returned from DesignElementRevision.getTransform()
designElements() - Method in interface nxopen.cae.optimization.TBSBaseDesignVariableBuilder: Returns the element group in which the value of the design variable is to be determined
License requirements: None.
designElements() - Method in interface nxopen.cae.optimization.TBSDesignArea: Returns the design elements for optimization
License requirements: None.
designElementState() - Method in interface nxopen.FileNew: Returns the state for the new design element.
designElementsToOperate() - Method in interface nxopen.assemblies.DesignElementBuilder: Returns the design elements to operate upon
License requirements: None.
designElementsToUpdatePosition() - Method in interface nxopen.assemblies.UpdateDesignElementPositionBuilder: Returns the objects for update position
License requirements: None.
designElementToCompare() - Method in interface nxopen.features.shipdesign.CompareModeBuilder: Returns the design element selection object to be processed in the change of mode comparing.
designElementToGenMfgData() - Method in interface nxopen.features.shipdesign.ManufacturingDataBuilder: Returns the design element to genenerate manufacturing data
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
designElementToRebase() - Method in interface nxopen.features.shipdesign.RebaseBuilder: Returns the selected design elements to rebase.
designElementToSetMode() - Method in interface nxopen.features.shipdesign.SetModeBuilder: Returns the design element selection object to be processed in the change of mode processing.
designElementToSynchronizeDesignView() - Method in interface nxopen.features.shipdesign.SynchronizeDesignViewBuilder: Returns the design element selection object to be processed in the change of mode processing.
designElementType() - Method in interface nxopen.assemblies.DesignElementBuilder: Returns the type of a design element
License requirements: None.
designElementType() - Method in interface nxopen.FileNew: Returns the design element type for the new design element.
DESIGNER_LOGIN - Static variable in class nxopen.tooling.ConcurrentDesignManagementBuilder.Types: the designer login page
designerName() - Method in interface nxopen.tooling.ConcurrentDesignManagementBuilder: Returns the designer name.
DesignFeatureCollection - Interface in nxopen.features: Manages design features.
designFeatureCollection() - Method in interface nxopen.features.FeatureCollection: Returns the DesignfeatureCollection instance belonging to this part .
designFeatureGroup() - Method in interface nxopen.features.shipdesign.DvToMvMappingBuilder: Returns the design feature group.
DesignFeatureRevision - Interface in nxopen.pdm: Represents the design feature revision in the database.
designHours() - Method in interface nxopen.tooling.QuickQuotationBuilder: Returns the design hours.
designLifeCriterion - Variable in class nxopen.uf.UFSf.AskDursolNxData
designLogic - Variable in class nxopen.RuleManager.FunctionInformation: TRUE if usable in Design Logic
designMountHead() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder: Design mount head for insert.
designNodes() - Method in interface nxopen.cae.optimization.TBSBaseDesignVariableBuilder: Returns the node group in which the value of the design variable is to be determined
License requirements: None.
designOption() - Method in interface nxopen.tooling.BurringInsertBuilder: Returns the design option to design punch or die.
designOption() - Method in interface nxopen.tooling.FormingInsertBuilder: Returns the design option to design punch or die.
designPart() - Method in interface nxopen.pdm.DesignElementRevision: Returns the part of the underlying design element.
designPart() - Method in interface nxopen.pdm.DesignSubordinateRevision: Returns the underlying loaded part of this subordinate.
designPositionSpindle() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder: Returns the selection list containing spindle line in design position .
designPrice() - Method in interface nxopen.tooling.QuickQuotationBuilder: Returns the work area width.
designResponse() - Method in interface nxopen.cae.optimization.TBSConstraintBuilder: Returns the design response
License requirements: None.
designResponse() - Method in interface nxopen.cae.optimization.TBSSingleObjective: Returns the design response
License requirements: None.
DesignRule - Interface in nxopen.routing: Represents DesignRule object
Creator not available in KF.
DesignRuleCollection - Interface in nxopen.routing: Represents a collection of DesignRule objects.
DesignRuleData() - Constructor for class nxopen.uf.UFRoute.DesignRuleData
DesignRuleData(int, int, int, Tag[]) - Constructor for class nxopen.uf.UFRoute.DesignRuleData
DesignRuleManager - Interface in nxopen.routing: Represents DesignRuleManager object
Creator not available in KF.
designRuleManager() - Method in interface nxopen.Session: Returns the DesignRule .
DesignRuleOverride - Interface in nxopen.routing: Represents Routing DesignRuleOverride object
Creator not available in KF.
designRules() - Method in interface nxopen.routing.RouteManager: RoutingDesignRule collection .
designRulesViolation() - Method in interface nxopen.routing.RouteManager: RoutingDesignRuleViolation collection .
DesignRuleViolation - Interface in nxopen.routing: Represents DesignRuleViolation object
Design Rule Violation object is created automatically during design rule check

Created in NX4.0.2
DesignRuleViolation.BlankOption - Class in nxopen.routing: Design Rule Violation Location Object Blank Option
DesignRuleViolation.ViolationLocationData - Class in nxopen.routing: This class holds the data returned from DesignRuleViolation.getViolationLocation()
DesignRuleViolationCollection - Interface in nxopen.routing: Represents a collection of DesignRuleViolation objects.
DesignRuleViolationCollection.Mode - Class in nxopen.routing: Design Rule Mode
DesignRuleViolationCollection.Reason - Class in nxopen.routing: Design Rule reason
DesignRuleViolationLocation - Interface in nxopen.routing: Represents DesignRuleViolationLocation object
Design Rule Violation Location object get created automatically during design rule check

Created in NX6.0.0
designRuleViolationLocation() - Method in interface nxopen.routing.RouteManager: RoutingDesignRuleViolationLocation collection .
DesignRuleViolationLocationCollection - Interface in nxopen.routing: Represents a collection of DesignRuleViolationLocation objects.
DesignRuleViolationLocationCollection.DeleteOption - Class in nxopen.routing: Design Rule Violation Location object delete option
DesignRuleViolationViewer - Interface in nxopen.routing: This class can be used to set the violation id, update text for overridding the violation and update the user name used to override the violation.
DesignRuleViolationViewer.FilterOption - Class in nxopen.routing: Enumerations to show options for filter.
DesignRuleViolationViewer.OverrideOption - Class in nxopen.routing: Enumerations to show options for override
designSequence() - Method in interface nxopen.tooling.DirectUnfoldBuilder: Returns the design sequence.
designSequence() - Method in interface nxopen.tooling.IntermediateStageBuilder: Returns the design sequence.
designStatus() - Method in interface nxopen.die.CastReliefParentBuilder: Returns the design status of cast relief, if true the cast relief will be built into the model, if false it will not.
designStatus() - Method in interface nxopen.die.ConnectProfileParentBuilder: Returns the design status of die connecting profiles
License requirements: ug_die_design ("Die Design")
.
designStatus() - Method in interface nxopen.die.DeckParentBuilder: Returns the design status of deck, if true the deck will be built into the model, if false it will not.
designStatus() - Method in interface nxopen.die.DrawDiePunchSectionBuilder: Returns the design status of the draw die punch casting, if true the casting will be built into the model, if false it will not.
designStatus() - Method in interface nxopen.die.FlangeSteelRibChildBuilder: Returns the design status of the Flange Steel Rib
License requirements: ug_die_design ("Die Design")
.
designStatus() - Method in interface nxopen.die.FlangeSteelRibParentBuilder: Returns the design status of the Flange Steel Ribs
License requirements: ug_die_design ("Die Design")
.
designStatus() - Method in interface nxopen.die.HandlingCoreChildBuilder: Returns the design status of the handling core, if true the handling core will be built into the model, if false it will not.
designStatus() - Method in interface nxopen.die.HandlingCoreParentBuilder: Returns the design status of handling cores, if true the handling cores will be built into the model, if false they will not.
designStatus() - Method in interface nxopen.die.HoleChildBuilder: Returns the design status of the die hole, if true the hole will be built into the model, if false it will not.
designStatus() - Method in interface nxopen.die.HoleParentBuilder: Returns the design status of die holes, if true the holes will be built into the model, if false they will not.
designStatus() - Method in interface nxopen.die.KeywayChildBuilder: Returns the design status of the keyway, if true the keyway will be built into the model, if false it will not.
designStatus() - Method in interface nxopen.die.KeywayParentBuilder: Returns the design status of keyways, if true the keyways will be built into the model, if false they will not.
designStatus() - Method in interface nxopen.die.PadChildBuilder: Returns the design status of the die pad, if true the pad will be built into the model, if false it will not.
designStatus() - Method in interface nxopen.die.PadParentBuilder: Returns the design status of die pads, if true the pads will be built into the model, if false they will not.
designStatus() - Method in interface nxopen.die.PierceHoleChildBuilder: Returns the design status of the pierce hole
License requirements: ug_die_design ("Die Design")
.
designStatus() - Method in interface nxopen.die.PierceHoleParentBuilder: Returns the design status of pierce holes
License requirements: ug_die_design ("Die Design")
.
designStatus() - Method in interface nxopen.die.PointChildBuilder: Returns the design status of the point, if true the point will be built into the model, if false it will not.
designStatus() - Method in interface nxopen.die.PointParentBuilder: Returns the design status of points, if true the points will be built into the model, if false they will not.
designStatus() - Method in interface nxopen.die.PressureSystemChildBuilder: Returns the design status of the pressure system, if true the pressure system will be built into the model, if false it will not.
designStatus() - Method in interface nxopen.die.PressureSystemParentBuilder: Returns the design status of pressure systems, if true the pressure systems will be built into the model, if false they will not.
designStatus() - Method in interface nxopen.die.RibChildBuilder: Returns the design status of the die rib, if true the rib will be built into the model, if false it will not.
designStatus() - Method in interface nxopen.die.RibParentBuilder: Returns the design status of die ribs, if true the ribs will be built into the model, if false they will not.
designStatus() - Method in interface nxopen.die.RotorSectionBuilder: Returns the design status of the die rotor casting
License requirements: ug_die_design ("Die Design")
.
designStatus() - Method in interface nxopen.die.SteelInsertSegmentChildBuilder: Returns the design status of die sisegs
License requirements: ug_die_design ("Die Design")
.
designStatus() - Method in interface nxopen.die.SteelInsertSegmentParentBuilder: Returns the design status of die sisegs
License requirements: ug_die_design ("Die Design")
.
designStatus() - Method in interface nxopen.die.ThroatChildBuilder: Returns the design status of the throat section, if true the throat section will be built into the model, if false it will not.
designStatus() - Method in interface nxopen.die.ThroatParentBuilder: Returns the design status of the throat sections, if true the throat sections will be built into the model, if false they will not.
designStatus() - Method in interface nxopen.die.WearPlateLocChildBuilder: Returns the design status of wear plate and locators
License requirements: ug_die_design ("Die Design")
.
designStatus() - Method in interface nxopen.die.WearPlateLocParentBuilder: Returns the design status of wear plate and locators
License requirements: ug_die_design ("Die Design")
.
designStudy() - Method in interface nxopen.BasePart: Returns the design study instance belonging to this part .
DesignStudyAttributeBuilder - Interface in nxopen.optimization: Represents a DesignStudyAttributeBuilder
To create a new instance of this class, use DesignStudyCollection.createDesignStudyAttributeBuilder()

Created in NX6.0.0
DesignStudyBuilder - Interface in nxopen.optimization: Represents a DesignStudyBuilder
To create a new instance of this class, use DesignStudyCollection.createDesignStudyBuilder()

Created in NX6.0.0
DesignStudyBuilder.DesignStudyAttributeType - Class in nxopen.optimization: Attribute type
DesignStudyBuilder.DesignStudyConstraintLimitType - Class in nxopen.optimization: Constraint limit type
DesignStudyBuilder.DesignStudyDistributeType - Class in nxopen.optimization: Distribution type
DesignStudyBuilder.DesignStudyObjective - Class in nxopen.optimization: Defined Objective Structure
DesignStudyBuilder.DesignStudyVariable - Class in nxopen.optimization: Defined variable structure
DesignStudyCollection - Interface in nxopen.optimization: Represents a DesignStudyCollection
To obtain an instance of this class, refer to BasePart

Created in NX6.0.0
DesignStudyObjective() - Constructor for class nxopen.optimization.DesignStudyBuilder.DesignStudyObjective
DesignStudyObjective(String, NXObject, DesignStudyBuilder.DesignStudyAttributeType, double, double, double, double) - Constructor for class nxopen.optimization.DesignStudyBuilder.DesignStudyObjective: Constructor for the DesignStudyObjective object.
DesignStudyVariable() - Constructor for class nxopen.optimization.DesignStudyBuilder.DesignStudyVariable
DesignStudyVariable(String, NXObject, DesignStudyBuilder.DesignStudyAttributeType, double, double, DesignStudyBuilder.DesignStudyDistributeType, double, double, double, int) - Constructor for class nxopen.optimization.DesignStudyBuilder.DesignStudyVariable: Constructor for the DesignStudyVariable object.
designSubordinateRevision() - Method in interface nxopen.assemblies.Component: Returns the DesignSubordinateRevision that corresponds to this component.
DesignSubordinateRevision - Interface in nxopen.pdm: Represents the design subordinate revision in the database.
designTasks() - Method in interface nxopen.tooling.ConcurrentDesignManagementBuilder: Returns the designer names.
designTool() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder: Returns the design tool.
designToolOpt() - Method in interface nxopen.tooling.DieBaseBuilder: Returns the design tool options.
DesignTrimToolBuilder - Interface in nxopen.tooling: Represents a builder to be used to create Mold Wizard design trim tool.
DesignTrimToolCollection - Interface in nxopen.tooling: Creates a DesignTrimToolCollection class
To obtain an instance of this class, refer to ToolingManager

Created in NX7.5.0
designTrimTools() - Method in interface nxopen.tooling.ToolingManager: Returns the DesignTrimToolCollection instance belonging to this part .
designVariable() - Method in interface nxopen.cae.optimization.DAOSolution: Returns the optimization design variable collection.
designVariables() - Method in interface nxopen.cae.ModelUpdateSolution: The design variables collection for this meta solution.
designVariables() - Method in interface nxopen.cae.optimization.TBSOptimizationSolution: Represents the design variable collection belonging to this optimization solution .
designVariableType() - Method in interface nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder: Returns the design variable type
License requirements: None.
designVarLinearRange() - Method in interface nxopen.cae.ModelUpdateOptimOptionsBuilder: Returns the design variable linear range
License requirements: None.
designVarWeight() - Method in interface nxopen.cae.ModelUpdateOptimOptionsBuilder: Returns the design variable weight
License requirements: None.
DESKTOP - Static variable in class nxopen.MovieSettingsBuilder.CaptureAreaChoices: Specifies that the Desktop contents are to be recorded
destForUnselectedLayer() - Method in interface nxopen.DxfdwgImporter: Returns the DestForUnselectedLayer command - number of destination layer
License requirements: None.
destination() - Method in interface nxopen.mechatronics.PositionControlBuilder: Returns the destination.
destination() - Method in interface nxopen.weld.SurfaceWeldBuilder: Returns the option specifying the destination for this surface weld feature.
destination() - Method in interface nxopen.weld.WeldJointBuilder: Returns the destination to create new joints
License requirements: None.
destinationCollector() - Method in interface nxopen.cae.ElementTypeBuilder: Returns the destination element collector
License requirements: nx_masterfem ("Finite Element Modeling")
.
DestinationCollectorBuilder - Interface in nxopen.cae: Represents a Element Collector Container (Ecc) selection .
destinationCoordinateSystem() - Method in interface nxopen.PartImporter: Returns the destination coordinate system.
destinationCoordinateSystemSpecification() - Method in interface nxopen.PartImporter: Returns the destination coordinate system specification.
destinationCsys() - Method in interface nxopen.features.OptimizeCurveBuilder: Returns the destination csys as global axis.
destinationFilename() - Method in interface nxopen.gateway.CopyCutBuilder: Returns the string of the filename to which to copy or cut the objects to
License requirements: None.
destinationFolder() - Method in interface nxopen.cae.AutoBCBuilder: Returns the destination folder of SimBC object
License requirements: None.
destinationFolder() - Method in interface nxopen.cae.SimBCBuilder: Returns the destination folder of CAE.SimBC object
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Created in NX9.0.0
destinationModule() - Method in interface nxopen.geometricutilities.NestModuleBuilder: Deprecated.
Deprecated in NX10.0.0. Please use FeatureCollection.reorganizeFeature(Feature[], Feature, nxopen.features.FeatureCollection.ReorderType) instead.
destinationNames - Variable in class nxopen.InterpartExpressionsBuilder.ExpressionsData: array of destination names
destinationObjects() - Method in interface nxopen.facet.BestFitAlignBuilder: Returns the destination objects
License requirements: None.
destinationOpt() - Method in interface nxopen.PasteSpecialBuilder: Returns the destination coordinate system option
License requirements: None.
destinationPart() - Method in interface nxopen.drawings.ViewCopyTo3dBuilder: Returns the path to the destination part
License requirements: nx_layout ("NX Layout")
.
destinationPath() - Method in interface nxopen.layout2d.PublishComponentBuilder: Returns the path of folder to publish into
License requirements: None.
destinationPoint() - Method in interface nxopen.PartImporter: Returns the destination point.
destinationPoint() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder: Returns the destination point for the copy operation.
destinationPosition() - Method in interface nxopen.display.LightBuilder: Returns the destination position - only applicable to spot light types
License requirements: None.
destinationView() - Method in interface nxopen.drafting.CutCopyPasteBuilder: Returns the destination view.
destinationView() - Method in interface nxopen.drafting.CutCopyPasteLeaderBuilder: Returns the destination view.
destPropertyId() - Method in interface nxopen.mechatronics.RuntimeFormulaBuilder: Returns the dest property id
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
destroy() - Method in interface nxopen.Builder: Deletes the builder, and cleans up any objects created by the builder.
destroy(boolean) - Method in interface nxopen.cae.CorrelSolution: Deletes a correlation solution
License requirements: nx_correl_base ("FE Correlation")
.
destroy(boolean) - Method in interface nxopen.cae.optimization.TBSOptimizationSolution: Deletes an optimization solution and the associated result file optional
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
destroy(boolean) - Method in interface nxopen.cae.optimization.TBSSmooth: Deletes a smooth and the associated result file optional
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
destroy() - Method in interface nxopen.cae.responsesimulation.EvaluationSetting: Destroies the evaluation setting object after evaluation.
destroy() - Method in interface nxopen.cae.responsesimulation.Excitation: Deletes a response simulation excitation
License requirements: nx_response_anlys ("NX Response Analysis")
.
destroy(boolean) - Method in interface nxopen.cae.responsesimulation.RSEvent: Deletes a response simulation dynamic event, including all excitations under it
License requirements: nx_response_anlys ("NX Response Analysis")
.
destroy(boolean) - Method in interface nxopen.cae.responsesimulation.Solution: Deletes a response simulation solution, including all events and excitations under it
License requirements: nx_response_anlys ("NX Response Analysis")
.
destroy() - Method in interface nxopen.cae.SimBCBuilder: Deletes the builder, and cleans up any objects created by the builder.
destroy() - Method in interface nxopen.geometricutilities.BlendStopshortBuilder: Destructor for BlendStopshortBuilder
License requirements: solid_modeling ("SOLIDS MODELING")

Created in NX5.0.0
destroy(FacePlaneSelectionBuilder) - Method in interface nxopen.geometricutilities.FacePlaneSelectionBuilderCollection: Destroys an FacePlaneSelectionBuilder.
destroy() - Method in interface nxopen.geometricutilities.SecondarySectionData: Delete the secondary section object.
destroy() - Method in interface nxopen.geometricutilities.WaveLinkRepository: Destroy the link repository
License requirements: None.
destroy() - Method in interface nxopen.positioning.MatingConverter: Deletes this MatingConverter immediately.
destroy() - Method in interface nxopen.ScCollector: Destroy the ScCollector object
License requirements: None.
destroy() - Method in interface nxopen.Section: Destroy the section object
License requirements: gateway ("UG GATEWAY")
.
destroy() - Method in interface nxopen.SketchEvaluator: Deletes the sketch evaluator, and cleans up any objects created by the it
License requirements: None.
destroyAllPreviewObjects() - Method in interface nxopen.routing.TransformPathBuilder: Destroys all preview objects associated with this operation.
destroyMemory() - Method in interface nxopen.tooling.EdgePatchBuilder: Destroy the builder memory.
destroyPath(NXObject[]) - Method in interface nxopen.features.shipdesign.StiffenerBuilder: Destroy the path curves
License requirements: nx_ship_detail ("Ship Detail Design")
.
destroyPlane() - Method in interface nxopen.Plane: Destroy the plane object
License requirements: None.
destroyReusableBuilder() - Method in interface nxopen.tooling.AddReusablePart: Destroys reusable builder data
License requirements: None.
destroySplitScreenLayoutAndNamedViews(Layout) - Method in interface nxopen.LayoutCollection: This method destroys the split screen layout along with the views that are there in it
License requirements: None.
destruct(StylerEvent) - Method in interface nxopen.uistyler.DialogItem.Destruct: Called when the dialog closes.
DESTRUCT_REASON - Static variable in class nxopen.uistyler.StylerEvent.Reason: Destruct reason
destructor() - Method in interface nxopen.bodydes.OnestepUnformBuilder: Destructs solver to release the data.
detachActiveRcp() - Method in interface nxopen.routing.EditLineSegmentBuilder: Detaches the line segment, stored in builder, at its active end RCP.
detachNoteFromView(Tag) - Method in interface nxopen.uf.UFDraw: Refer to UF_DRAW_detach_note_from_view for documentation.
detachPoint(int) - Method in interface nxopen.routing.SplinePathBuilder: Detaches the point at the selected index from all objects its attached to using a Touch constraint.
detachSegments(int, Tag[]) - Method in interface nxopen.uf.UFRoute: Deprecated.
The equivalent Open C method has retired
detachSelectedPath() - Method in interface nxopen.routing.TransformPathBuilder: Detaches the selected path ends from the connected routing segments.
detail() - Method in interface nxopen.preferences.ViewPreferences: Returns object for doing View Preferences settings applicable to Detail .
detail - Variable in class nxopen.uf.UFView.LightAttributes
DETAIL_COARSE - Static variable in class nxopen.uf.UFView.LightDetail
DETAIL_DESIGN - Static variable in class nxopen.features.shipdesign.StiffenerBySupportPathBuilder.Scenario: Detail Design Scenario
DETAIL_EXTRA_FINE - Static variable in class nxopen.uf.UFView.LightDetail
DETAIL_FINE - Static variable in class nxopen.uf.UFView.LightDetail
DETAIL_RAY_TRACED - Static variable in class nxopen.uf.UFView.LightDetail
DETAIL_STANDARD - Static variable in class nxopen.uf.UFView.LightDetail
DETAIL_SUBTYPE - Static variable in class nxopen.uf.UFView.Subtype
DETAIL_VIEW - Static variable in class nxopen.drawings.DraftingViewCollection.ViewCopyDetailOption: detail view
DetailBoundaryOption - Class in nxopen.preferences: Represents the boundary options
DETAILED - Static variable in class nxopen.cae.NodeElementInfoBuilder.PropertyType: detailed property
DETAILED - Static variable in class nxopen.cae.Post.Legend
DETAILED - Static variable in class nxopen.features.vehicledesign.CloseRangeDemoCylinderListItemBuilder.ValidateTypes: Detailed type
DETAILED - Static variable in class nxopen.preferences.SessionDrafting.AnnotationStyleType
DETAILED - Static variable in class nxopen.routing.StockStyle: Detailed profile.
DETAILED_SOLID - Static variable in class nxopen.routing.StockBuilder.StockStyleType: Detailed Solid
DETAILED_SOLID - Static variable in class nxopen.routing.StockStyleBuilder.StockStyle
detailedusageinfo - Variable in class nxopen.geometricutilities.EntityUsageInfo.DependentFeaturesData: detailed usage information for each dependent feature
detailedusageinfo - Variable in class nxopen.geometricutilities.EntityUsageInfo.OtherDependentsData: detailed usage information for each dependent object
detailID() - Method in interface nxopen.drafting.DrawingCreationWizardBuilder: Returns the detail id.
detailLevel() - Method in interface nxopen.annotations.BillOfMaterialBuilder: Returns the value that specifies the detail level type.
detailLevel() - Method in interface nxopen.sim.KinematicSinumerikCaBuilder: Returns the detail level for this protection area
License requirements: None.
DETAILS - Static variable in class nxopen.sim.SimDebugBuilder.DumpType: Dump Details
DETAILS - Static variable in class nxopen.sim.SimDebugBuilder.TraceType: Trace Details
DetailView - Interface in nxopen.drawings: Represents a Detail View.
DetailViewBuilder - Interface in nxopen.drawings: Represents a DetailView .
DetailViewBuilder.LabelOnParentType - Class in nxopen.drawings: the display type for the label on parent
DetailViewBuilder.Types - Class in nxopen.drawings: the type of boundary
DetailViewPreferences - Interface in nxopen.preferences: Represents set of Detail View Preferences applicable to drafting views.
DetectPrimitivesBuilder - Interface in nxopen.facet: This class manages the primitive shape detection for a facet body.
detectRunSpools() - Method in interface nxopen.routing.Run: This will detect spools in a run
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
DETERMINANT - Static variable in class nxopen.cae.Result.Component
determinant(double[]) - Method in interface nxopen.uf.UFMtx2: Refer to UF_MTX2_determinant for documentation.
determinant(double[]) - Method in interface nxopen.uf.UFMtx3: Refer to UF_MTX3_determinant for documentation.
determineDiscrepancies() - Method in interface nxopen.formboard.UpdateFormboardBuilder: Once the mapping has been determined, this method can find any discrepancies between the 3D harness and the formboard.
devchkAdjacentEdges(int, Tag[], double, int) - Method in interface nxopen.uf.UFModeling: Refer to UF_MODL_devchk_adjacent_edges for documentation.
DevchkAdjacentEdgesData() - Constructor for class nxopen.uf.UFModeling.DevchkAdjacentEdgesData
DevchkEeInfo() - Constructor for class nxopen.uf.UFModl.DevchkEeInfo
DevchkEeInfo(int, Tag, double[], double[], Tag, double[], double[], double, double) - Constructor for class nxopen.uf.UFModl.DevchkEeInfo
DEVELOPABLE - Static variable in class nxopen.geometricutilities.AlignmentMethodBuilder.Type
deviateFromStandard() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder: Returns the indication if the target values are deviated from standard.
deviation() - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder: Returns the deviation
License requirements: None.
DEVIATION - Static variable in class nxopen.cae.optimization.TBSBaseDesignVariableBuilder.GroupOperator: Deviation from the maximum value of the reference value
deviation - Variable in class nxopen.uf.UFGdt.LimitsAndFitsData
deviation - Variable in class nxopen.uf.UFGdt.ThreadData
deviationalTolerance() - Method in interface nxopen.features.sheetmetal.ExportFlatPatternBuilder: Returns the deviational tolerance
License requirements: None.
DeviationChecking - Interface in nxopen.geometricanalysis: Represents a DeviationChecking
To create a new instance of this class, use AnalysisManager.createDeviationCheckingObject()

Created in NX6.0.0
DeviationChecking.DeviationOptions - Class in nxopen.geometricanalysis: the deviation type to be shown
DeviationChecking.Types - Class in nxopen.geometricanalysis: the type of deviation checking to be performed
DeviationGauge - Interface in nxopen.geometricanalysis: Deviation Gauge analysis object class
To create or edit an instance of this class, use DeviationGaugeBuilder

Created in NX6.0.0
DeviationGaugeBuilder - Interface in nxopen.geometricanalysis: DeviationGaugeBuilder class
To create a new instance of this class, use AnalysisObjectCollection.createDeviationGaugeBuilder(nxopen.DisplayableObject)
Default values.
DeviationGaugeBuilder.AdditionalValuesLabelType - Class in nxopen.geometricanalysis: This enum represents the Deviation Gauge Analysis Object additional values label type
DeviationGaugeBuilder.ColorPlotTypes - Class in nxopen.geometricanalysis: This enum represents the Deviation Gauge Analysis Object color plot types
DeviationGaugeBuilder.MeasurementMethodType - Class in nxopen.geometricanalysis: This enum represents the Deviation Gauge Analysis Object evaluation types
DeviationGaugeBuilder.MinMaxType - Class in nxopen.geometricanalysis: This enum represents the Deviation Gauge Analysis Object min max type
DeviationGaugeBuilder.ReportingPerTypes - Class in nxopen.geometricanalysis: This enum represents the Deviation Gauge Analysis Object reporting per setting
DeviationGaugeBuilder.XyzDirectionType - Class in nxopen.geometricanalysis: This enum represents the Deviation Gauge Analysis Object X, Y, Z direction options
deviationIntervals() - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder: Returns the number of deviation intervals
License requirements: studio_free_form ("STUDIO FREE FORM")
.
deviationOption() - Method in interface nxopen.geometricanalysis.DeviationChecking: Returns the number or type of deviations to be shown for the deviation checking
License requirements: None.
DEVICE - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.CommandTypes: Enter a statement defining a device statement
DEVICE - Static variable in class nxopen.formboard.UpdateDiscrepancy.ObjectType: ConnectorDevice object which has a type of device.
device() - Method in interface nxopen.ListingWindow: Returns the device type for the window.
DEVICE - Static variable in class nxopen.routing.electrical.ConnectorDevice.ComponentType
DEVICE - Static variable in class nxopen.routing.RouteManager.PartType
device() - Method in interface nxopen.sim.KinematicChain: Returns the device component of the kinematic chain
License requirements: None.
DeviceAndViewIndexData() - Constructor for class nxopen.cae.xyplot.Plot.DeviceAndViewIndexData
deviceId() - Method in interface nxopen.sim.KinematicComponentBuilder: Returns the device id
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
deviceIndex() - Method in interface nxopen.cae.xyplot.BasePlotParameters: Returns the index of device on which plot graph will be shown.
deviceName() - Method in interface nxopen.cam.InspectionCmmCommandBuilder: Returns the device name
License requirements: None.
DeviceRelationship - Interface in nxopen.routing: Represents a relationship between SingleDevice objects.
DeviceRelationship.RelationType - Class in nxopen.routing: Specifies the nature of the relationship between the related and relating objects.
deviceType() - Method in interface nxopen.cam.InspectionCmmCommandBuilder: Returns the device type
License requirements: None.
devLength() - Method in interface nxopen.tooling.DirectUnfoldBuilder: Deprecated.
Deprecated in NX10.0.0. Use Tooling.DefineNeutralFactorBuilder#bendDevelopedLength instead.
devs - Variable in class nxopen.uf.UFModeling.DevchkAdjacentEdgesData
devTolPlaces() - Method in interface nxopen.cam.InspectionCmmCommandBuilder: Returns the deviation and tolerance decimal places
License requirements: None.
devType - Variable in class nxopen.uf.UFModl.DevchkEeInfo
DexBuilder - Interface in nxopen: This is an abstract class that provides the basic functionality common to all dex builders.
DexManager - Interface in nxopen: The DexManager class provides methods to create Dex Builder objects.
dexManager() - Method in interface nxopen.Session: Returns the DexManager belonging to this session
Created in NX3.0.0
DF - Static variable in class nxopen.weld.ExportWeldBuilder.AttributeOriginType
DF - Static variable in class nxopen.weld.InformationBuilder.AttributeOriginType
DfoConstraint() - Constructor for class nxopen.uf.UFModl.DfoConstraint
DfoConstraint(UFModl.DfoConstraintType, Tag, Tag, Tag, String) - Constructor for class nxopen.uf.UFModl.DfoConstraint
DfoRegion() - Constructor for class nxopen.uf.UFModl.DfoRegion
DfoRegion(Tag[], int, Tag[], int, Tag[], int) - Constructor for class nxopen.uf.UFModl.DfoRegion
DIA - Static variable in class nxopen.annotations.DiameterSymbol: Specifies DIA symbol
DIA - Static variable in class nxopen.annotations.SearchCriteriaDimensionBuilder.DiameterSymbolOptions
DIA_RAD_ABOVE - Static variable in class nxopen.uf.UFDrf.DiameterRadiusPlacement
DIA_RAD_AFTER - Static variable in class nxopen.uf.UFDrf.DiameterRadiusPlacement
DIA_RAD_BEFORE - Static variable in class nxopen.uf.UFDrf.DiameterRadiusPlacement
DIA_RAD_BELOW - Static variable in class nxopen.uf.UFDrf.DiameterRadiusPlacement
DIA_RAD_OMIT - Static variable in class nxopen.uf.UFDrf.DiameterRadiusPlacement
DIAGONAL_POINTS - Static variable in class nxopen.cam.DmRotaryFloorFinishBuilder.DmSurfCutAreaType: Diagonal Points
DIAGONAL_POINTS - Static variable in class nxopen.cam.DmSurfBuilder.DmSurfCutAreaType: Diagonal Points
DIAGONAL_POINTS - Static variable in class nxopen.features.PointSetBuilder.PatternLimitsType: The pattern limit is defined by two points.
DiagramDisplayStyles - Interface in nxopen.cae.xyplot: Manages the diagram display styles.
diagramDisplayStyles() - Method in interface nxopen.cae.xyplot.PlotGraphTemplate: Returns the diagram display styles.
diagrammingManager() - Method in interface nxopen.Part: Returns the DiagrammingManager instance belonging to this part .
DIALOG - Static variable in class nxopen.uistyler.Attachment.AttachType: Dialog type
Dialog - Interface in nxopen.uistyler: Represents a DialogItem for UI Styler.
DIALOG - Static variable in class nxopen.uistyler.StylerItem.ItemType: Dialog item
Dialog.ItemType - Class in nxopen.uistyler: Represents dialog item type
DIALOG_DIR_COUNT - Static variable in class nxopen.uf.UFUi.DialogDirId
DIALOG_FILTER_COUNT - Static variable in class nxopen.uf.UFUi.DialogFilterId
DIALOG_ITEM - Static variable in class nxopen.uistyler.Dialog.ItemType
dialogBarDecimalPlaces() - Method in interface nxopen.preferences.SessionUserInterfaceUI: Returns the dialog box decimal places
License requirements: None.
dialogBarTracking() - Method in interface nxopen.preferences.SessionUserInterfaceUI: Returns the dialog bar tracking flag
License requirements: None.
dialogBoxDecimalPlaces() - Method in interface nxopen.preferences.PartUserInterface: Returns the dialog box decimal places
License requirements: None.
DialogIndex - Class in nxopen.uistyler: Represents indexes
DialogItem - Interface in nxopen.uistyler: Represents a DialogItem for UI Styler.
DialogItem.Apply - Interface in nxopen.uistyler: Called when a dialog user clicks Apply or <Ctrl>MB2 anywhere in NX or presses the Apply's keyboard accelerator as defined in the resource file.
DialogItem.Back - Interface in nxopen.uistyler: Called when a dialog user clicks Back <Shift>MB2 anywhere in NX or presses Back's keyboard accelerator as defined in the resource file.
DialogItem.Cancel - Interface in nxopen.uistyler: Called when a dialog user clicks Cancel or <Alt>MB2 anywhere in NX or presses Cancel's keyboard accelerator as defined in the resource file.Cancel callbacks should terminate the dialog and always return UF_UI_CB_EXIT_DIALOG.
DialogItem.Construct - Interface in nxopen.uistyler: Called when the dialog displays.
DialogItem.Destruct - Interface in nxopen.uistyler: Called when the dialog closes.
DialogItem.DialogItemIndex - Class in nxopen.uistyler: Describes dialog item index
DialogItem.FileOperation - Interface in nxopen.uistyler: Called just before a dialog user selects a file operation, such as in File?
DialogItem.Okay - Interface in nxopen.uistyler: Called when a dialog user clicks OK or MB2 anywhere in NX or presses the OK's keyboard accelerator as defined in the resource file.
DialogItem.PageSwitch - Interface in nxopen.uistyler: Called when a user switches tabs.
DialogResponse - Class in nxopen.uistyler: Represents dialog response
dialogSetItem(UFVariant, String, String) - Method in interface nxopen.uf.UFSim: Refer to UF_SIM_dialog_set_item for documentation.
dialogShown() - Method in interface nxopen.blockstyler.BlockDialog.DialogShown: Dialog Shown callback
License requirements: None.
dialogSizing() - Method in interface nxopen.blockstyler.CompositeBlock: Returns the Dialog Sizing
License requirements: None.
dialogSizingAsString() - Method in interface nxopen.blockstyler.CompositeBlock: Returns the Dialog Sizing as string
License requirements: None.
DialogState - Class in nxopen.uistyler: Represents the dialog state
dialogType() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder: Returns the dialog type
License requirements: None.
dialogViolationId() - Method in interface nxopen.routing.DesignRuleViolationViewer: Returns the dialog design rule violation Id
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
diamDimLineAng() - Method in interface nxopen.annotations.BaseDiameterDimension: Deprecated.
Deprecated in NX6.0.0. Use BaseDiameterDimension.diameterDimensionLineAngle() instead.
DIAMETER - Static variable in class nxopen.annotations.DimensionType: Diameter dimension
DIAMETER - Static variable in class nxopen.annotations.FeatureControlFrameDataBuilder.ToleranceZoneShape: diameter
DIAMETER - Static variable in class nxopen.annotations.HoleCalloutSettingsBuilder.Parametertype
DIAMETER - Static variable in class nxopen.annotations.HoleTableSettingsContentBuilder.Content: Diameter
DIAMETER - Static variable in class nxopen.annotations.SearchCriteriaCalloutBuilder.CalloutTypes: Diameter
DIAMETER - Static variable in class nxopen.annotations.SearchCriteriaDimensionBuilder.DiameterSymbolOptions
DIAMETER - Static variable in class nxopen.annotations.SearchCriteriaDimensionBuilder.DimensionTypes: Diameter
DIAMETER - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.ZoneShapeOptions: diameter
diameter() - Method in interface nxopen.cam.BoundaryTurnBlank: Returns the diameter of the bar
License requirements: None.
DIAMETER - Static variable in class nxopen.cam.BoundaryTurnMemberFineFinishOffset.TypeValue
DIAMETER - Static variable in class nxopen.cam.BoundaryTurnMemberOffset.DistanceTypeMode
DIAMETER - Static variable in class nxopen.cam.CylinderMillingBuilder.BlankDiameterTypes: Diameter
DIAMETER - Static variable in class nxopen.cam.CylinderMillingBuilder.DiameterForHelixTypes: Helix Diameter
diameter - Variable in class nxopen.cam.HolderSectionBuilder.Data: the diameter
diameter() - Method in interface nxopen.cam.HoleBossSet: Returns the Diameter
License requirements: None.
DIAMETER - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.TolType: Diameter
diameter() - Method in interface nxopen.cam.LaserCutoutDefinition: Returns the Diameter
License requirements: None.
diameter() - Method in interface nxopen.cam.LaserTool: Returns the Nozzle Diameter
License requirements: None.
diameter - Variable in class nxopen.cam.MillingTrackpointBuilder.CalculateDistanceData: the diameter
diameter - Variable in class nxopen.cam.MillingTrackpointBuilder.Data: the diameter
diameter - Variable in class nxopen.cam.MillingTrackpointBuilder.TrackPointData: the diameter
diameter() - Method in interface nxopen.cam.ProbeCalibrateSphereMoveBuilder: Returns the diameter defining the sphere to probe
License requirements: None.
diameter() - Method in interface nxopen.cam.ProbeCalibrateStylusMoveBuilder: Returns the diameter defining the cylinder to probe
License requirements: None.
diameter() - Method in interface nxopen.cam.ProbeInspectBorebossMoveBuilder: Returns the diameter defining the cylinder to probe
License requirements: None.
diameter - Variable in class nxopen.cam.StepParamsBuilder.Data: the diameter
DIAMETER - Static variable in class nxopen.cam.TurnRoughFinishTestCut.SecondarySequenceTypes: Secondary Test Cut Sequence: Diameter
diameter() - Method in interface nxopen.cam.WireGuide: Returns the diameter
License requirements: None.
diameter() - Method in interface nxopen.cam.WireTool: Returns the Tool Diameter (inheritable double)
License requirements: cam_base ("CAM BASE")
.
diameter() - Method in interface nxopen.die.HeelpostBuilder: Returns the diameter of the guide pin hole
License requirements: None.
diameter() - Method in interface nxopen.die.HoleChildBuilder: Returns the diameter of the die hole.
diameter() - Method in interface nxopen.die.HoleParentBuilder: Returns the diameter of die holes.
diameter() - Method in interface nxopen.die.PadChildBuilder: Returns the diameter of the die pad.
diameter() - Method in interface nxopen.die.PadParentBuilder: Returns the diameter of die pads.
diameter() - Method in interface nxopen.die.PierceHoleChildBuilder: Returns the diameter of the pierce hole
License requirements: ug_die_design ("Die Design")
.
diameter() - Method in interface nxopen.die.PierceHoleParentBuilder: Returns the diameter of pierce holes
License requirements: ug_die_design ("Die Design")
.
diameter() - Method in interface nxopen.die.PressureSystemChildBuilder: Returns the diameter of the pressure system.
diameter() - Method in interface nxopen.die.PressureSystemParentBuilder: Returns the diameter of pressure systems.
diameter() - Method in interface nxopen.features.AdmResizeFaceBuilder: Returns the diameter to resize, only for cylinderical and sphere faces
License requirements: None.
diameter() - Method in interface nxopen.features.AnalyzePocketBuilder: Returns the diameter defines the diameter of End Mill or Shperical Mill.
diameter() - Method in interface nxopen.features.AssociativeArcBuilder: Returns the diameter of arc
License requirements: None.
DIAMETER - Static variable in class nxopen.features.AssociativeArcBuilder.EndOption: Diameter
DIAMETER - Static variable in class nxopen.features.AssociativeArcBuilder.MidOption: Diameter
diameter() - Method in interface nxopen.features.BlendPocketBuilder: Returns the diameter defines the diameter of End Mill or Shperical Mill.
diameter() - Method in interface nxopen.features.CylinderBuilder: Returns the diameter.
DIAMETER - Static variable in class nxopen.features.HelixBuilder.SizeOptions: Size by diameter
diameter - Variable in class nxopen.features.Hole.CounterboreHoleData: Expression for diameter
diameter - Variable in class nxopen.features.Hole.CountersinkHoleData: Expression for diameter
diameter() - Method in interface nxopen.features.Hole: Returns the diameter of the hole.
diameter - Variable in class nxopen.features.Hole.SimpleHoleData: Expression for diameter
DIAMETER - Static variable in class nxopen.features.RadialDimensionBuilder.ValueOption
DIAMETER - Static variable in class nxopen.features.ResizeCurveBuilder.ValueType
diameter() - Method in interface nxopen.features.ResizeFaceBuilder: Returns the diameter to resize, only for cylinderical and sphere faces, don't use it until nx502
License requirements: None.
diameter() - Method in interface nxopen.features.sheetmetal.AeroLighteningCutoutBuilder: Returns the diameter
License requirements: None.
diameter() - Method in interface nxopen.features.sheetmetal.ClosedCornerBuilder: Returns the diameter.
diameter() - Method in interface nxopen.features.sheetmetal.EditCornerBuilder: Returns the diameter for a circular cutout
License requirements: None.
diameter() - Method in interface nxopen.features.sheetmetal.ThreeBendCornerBuilder: Returns the diameter used for circular, u and v cutout corner treatments.
diameter() - Method in interface nxopen.features.shipdesign.PenetrationAssociationBuilder: Returns the diameter expression
License requirements: None.
diameter() - Method in interface nxopen.features.shipdesign.PenetrationCutoutBuilder: Returns the diameter expression
License requirements: None.
diameter() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder: Returns the diameter expression
License requirements: None.
diameter() - Method in interface nxopen.features.SphereBuilder: Returns the diameter of the Sphere.
diameter() - Method in interface nxopen.features.vehicledesign.BaseDataWheelBuilder: Returns the norminal diameter of the wheel.
DIAMETER - Static variable in class nxopen.features.vehicledesign.DynamicCurbBuilder.WheelType
DIAMETER - Static variable in class nxopen.features.vehicledesign.GroundClearanceBuilder.WheelType
DIAMETER - Static variable in class nxopen.features.vehicledesign.InnerAngleBuilder.WheelSizeType
DIAMETER - Static variable in class nxopen.features.vehicledesign.SlopeBuilder.WheelSizeType
DIAMETER - Static variable in class nxopen.features.vehicledesign.WheelFixingBuilder.WheelSizeType
DIAMETER - Static variable in class nxopen.MeasureDistanceBuilder.DistanceType
DIAMETER - Static variable in class nxopen.MeasureManager.RadialMeasureType
diameter() - Method in interface nxopen.tooling.CoolingDefineChannelBuilder: Returns the channel diameter
License requirements: None.
diameter() - Method in interface nxopen.tooling.CoolingPatternBuilder: Returns the channel diameter
License requirements: None.
diameter - Variable in class nxopen.uf.UFCutter.HolderSection
diameter - Variable in class nxopen.uf.UFCutter.TrackingPointData
diameter - Variable in class nxopen.uf.UFGdt.TargetDiaArea
diameter - Variable in class nxopen.uf.UFModl.SmholeData
diameter - Variable in class nxopen.uf.UFModlFeatures.AskBossParmsData
diameter - Variable in class nxopen.uf.UFModlFeatures.AskCylinderParmsData
diameter - Variable in class nxopen.uf.UFModlFeatures.AskCylPocketParmsData
diameter - Variable in class nxopen.uf.UFModlFeatures.AskSimpleHoleParmsData
diameter - Variable in class nxopen.uf.UFModlFeatures.AskTaperHoleParmsData
diameter - Variable in class nxopen.uf.UFModlGeneral.AskPrismParmsData
diameter - Variable in class nxopen.uf.UFTurn.IpwBoxData
diameter1 - Variable in class nxopen.uf.UFModlFeatures.AskCBoreHoleParmsData
diameter1 - Variable in class nxopen.uf.UFModlFeatures.AskCSunkHoleParmsData
diameter2 - Variable in class nxopen.uf.UFModlFeatures.AskCBoreHoleParmsData
diameter2 - Variable in class nxopen.uf.UFModlFeatures.AskCSunkHoleParmsData
DIAMETER_DIM - Static variable in class nxopen.Sketch.ConstraintType
DIAMETER_DIM - Static variable in class nxopen.uf.UFSket.ConType
DIAMETER_DISTANCE - Static variable in class nxopen.GenericMeasure.Type
DIAMETER_FIT - Static variable in class nxopen.annotations.HoleTableSettingsContentBuilder.Content: DiameterFit
DIAMETER_RADIUS - Static variable in class nxopen.annotations.TextComponent.TextType: diameter or radius or arc length symbol text
DIAMETER_REFERENCE - Static variable in class nxopen.annotations.SearchCriteriaDimensionBuilder.ToleranceTypes: DiameterReference
DIAMETER_REFERENCE - Static variable in class nxopen.annotations.ToleranceType: (DIA xxx)
DIAMETER_REFERENCE_TOL - Static variable in class nxopen.uf.UFDrf.ToleranceType
DIAMETER_USE_DIA - Static variable in class nxopen.uf.UFDrf.DiameterSymbol
DIAMETER_VALUE - Static variable in class nxopen.routing.PathStockBuilder.AssignMethod: User specified diameter, creates round space reservation stock.
diameterBuilder() - Method in interface nxopen.cam.HoleBossSet: Returns the diameter builder
License requirements: None.
diameterBuilder() - Method in interface nxopen.cam.NcmPlanarEngRetBuilder: Returns the engage/retract diameter builder
License requirements: None.
diameterBuilder() - Method in interface nxopen.cam.NcmScEngRetBuilder: Returns the engage/retract diameter builder
License requirements: None.
DiameterDimension - Interface in nxopen.annotations: Represents a diameter dimension
To create or edit an instance of this class, use RadialDimensionBuilder

Created in NX4.0.0
diameterDimensionLineAngle() - Method in interface nxopen.annotations.BaseDiameterDimension: Returns a value of diameter dimension line angle
License requirements: None.
diameterForHelix() - Method in interface nxopen.cam.CylinderMillingBuilder: Returns the Diameter for Helix
License requirements: None.
diameterObjects() - Method in interface nxopen.MeasureDistanceBuilder: Returns the diameter objects
License requirements: None.
DiameterRadiusLeaderStub - Class in nxopen.annotations: Specifies the leader stub relative to diameter/radius dimension text
diameterRadiusPlacement() - Method in interface nxopen.annotations.RadialStyleBuilder: Returns the diameter radius symbol placement with respect to the dimension text.
diameterRadiusPlacement - Variable in class nxopen.uf.UFDrf.DiameterRadiusPreferences
DiameterRadiusPreferences - Interface in nxopen.annotations: Represents diameter and radius preferences .
DiameterRadiusPreferences() - Constructor for class nxopen.uf.UFDrf.DiameterRadiusPreferences
DiameterRadiusPreferences(UFDrf.DiameterSymbol, String, UFDrf.RadiusSymbol, String, UFDrf.DiameterRadiusPlacement, UFDrf.TextAboveLeader, double, double) - Constructor for class nxopen.uf.UFDrf.DiameterRadiusPreferences
DiameterRadiusSymbolPlacement - Class in nxopen.annotations: Specifies the diameter/radius symbol placement relative to the dimension text
DIAMETERS_AND_HALF_ANGLE - Static variable in class nxopen.features.ConeBuilder.Types: Represents type of cone created by providing Diameters and Half Angle
DIAMETERS_AND_HEIGHT - Static variable in class nxopen.features.ConeBuilder.Types: Represents type of cone created by providing Diameters and Height
DIAMETERS_ONLY - Static variable in class nxopen.cam.ProfileStrategy.Types: Profile strategy: Diameters Only
DIAMETERS_THEN_FACES - Static variable in class nxopen.cam.ProfileStrategy.Types: Profile strategy: Diameters First, Then Faces
diameterSymbol() - Method in interface nxopen.annotations.DiameterRadiusPreferences: Returns the diameter symbol
License requirements: None.
DiameterSymbol - Class in nxopen.annotations: Specifies the diameter symbol
diameterSymbol() - Method in interface nxopen.annotations.RadialStyleBuilder: Returns the text for a user-defined diameter symbol
License requirements: None.
diameterSymbol() - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder: Returns the diameter symbol
License requirements: None.
diameterSymbol - Variable in class nxopen.uf.UFDrf.DiameterRadiusPreferences
diameterSymbolText() - Method in interface nxopen.annotations.DiameterRadiusPreferences: Returns the symbol text for user defined diameter symbol
License requirements: None.
diameterSymbolType() - Method in interface nxopen.annotations.RadialStyleBuilder: Returns the diameter symbol type
License requirements: None.
diameterSymbolType - Variable in class nxopen.uf.UFDrf.DiameterRadiusPreferences
diameterTitle - Variable in class nxopen.die.HoleChildBuilder.HoleAttributesData: Title for diameter attribute.
diameterTitle - Variable in class nxopen.die.HoleParentBuilder.HoleAttributesData: Title for diameter attribute.
diameterTitle - Variable in class nxopen.die.PadChildBuilder.HoleAttributesData: Title for diameter attribute.
diameterTitle - Variable in class nxopen.die.PadParentBuilder.HoleAttributesData: Title for diameter attribute.
diameterTitle - Variable in class nxopen.die.PierceHoleChildBuilder.HoleAttributesData: title for diameter attribute
diameterTitle - Variable in class nxopen.die.PierceHoleParentBuilder.HoleAttributesData: title for diameter attribute
diameterType() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder: Returns the diameter setting
License requirements: None.
diameterVal - Variable in class nxopen.uf.UFDrf.AskObjectPreferencesData
diameterValue() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder: Returns the diameter value
License requirements: None.
diameterValue() - Method in interface nxopen.routing.PathStockBuilder: Returns the diameter value to use for the Routing.PathStockBuilder.AssignMethod#DIAMETER_VALUE method of stock assignment.
diameterValue - Variable in class nxopen.uf.UFDrf.AskPreferencesData
DIAMETERX1 - Static variable in class nxopen.features.HolePackageBuilder.ThreadLengthOptions: 1 * (tap drill diameter)
DIAMETERX1 - Static variable in class nxopen.geometricutilities.EndHoleData.ThreadLengthOptions: 1 * (tap drill diameter)
DIAMETERX15 - Static variable in class nxopen.features.HolePackageBuilder.ThreadLengthOptions: 1.5 * (tap drill diameter)
DIAMETERX15 - Static variable in class nxopen.geometricutilities.EndHoleData.ThreadLengthOptions: 1.5 * (tap drill diameter)
DIAMETERX20 - Static variable in class nxopen.features.HolePackageBuilder.ThreadLengthOptions: 2 * (tap drill diameter)
DIAMETERX20 - Static variable in class nxopen.geometricutilities.EndHoleData.ThreadLengthOptions: 2 * (tap drill diameter)
DIAMETERX25 - Static variable in class nxopen.features.HolePackageBuilder.ThreadLengthOptions: 2.5 * (tap drill diameter)
DIAMETERX25 - Static variable in class nxopen.geometricutilities.EndHoleData.ThreadLengthOptions: 2.5 * (tap drill diameter)
DIAMETERX30 - Static variable in class nxopen.features.HolePackageBuilder.ThreadLengthOptions: 3 * (tap drill diameter)
DIAMETERX30 - Static variable in class nxopen.geometricutilities.EndHoleData.ThreadLengthOptions: 3 * (tap drill diameter)
DIAMETRAL - Static variable in class nxopen.annotations.DimensionMeasurementBuilder.MeasurementMethod: Diametral measurement type
DIAMETRAL_SIZE - Static variable in class nxopen.uf.UFGdt.SizeValueType
DIAMOND - Static variable in class nxopen.cae.MarkerType0d
DIAMOND - Static variable in class nxopen.cae.ModelDisplayBuilder.FreeEdgeMarker: Diamond marker
DIAMOND - Static variable in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeMarker: Diamond marker
DIAMOND - Static variable in class nxopen.cae.xyplot.PointMarker: Diamond marker
DIAMOND - Static variable in class nxopen.fields.DisplayPropertiesBuilder.IndepDomDispType
DIAMOND - Static variable in class nxopen.fields.DisplayPropertiesBuilder.ValuesEnum
DIAMOND - Static variable in class nxopen.geometricutilities.RectangularPattern.SimplifiedLayoutTypes: Diamond Layout
DIAMOND - Static variable in class nxopen.uf.UFDisp.PolyMarker
DIAMOND - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
DIAMOND100 - Static variable in class nxopen.cam.TurnToolBuilder.InsertShapes: Insert shape: Diamond 100
DIAMOND35 - Static variable in class nxopen.cam.TurnToolBuilder.InsertShapes: Insert shape: Diamond 35
DIAMOND55 - Static variable in class nxopen.cam.TurnToolBuilder.InsertShapes: Insert shape: Diamond 55
DIAMOND75 - Static variable in class nxopen.cam.TurnToolBuilder.InsertShapes: Insert shape: Diamond 75
DIAMOND80 - Static variable in class nxopen.cam.TurnToolBuilder.InsertShapes: Insert shape: Diamond 80
DIAMOND86 - Static variable in class nxopen.cam.TurnToolBuilder.InsertShapes: Insert shape: Diamond 86
diaScaleFactor() - Method in interface nxopen.cae.CircularImprintBuilder: Returns the dia scale factor
License requirements: None.
DIE - Static variable in class nxopen.die.PierceTaskBuilder.CenterPointOptionTypes: Center points output in die position
DIE - Static variable in class nxopen.tooling.BendInsertDesignBuilder.InsertTypeOption: die insert
DIE - Static variable in class nxopen.tooling.BurringInsertBuilder.ParentTypes: use PDW project's die part as parent part
DIE - Static variable in class nxopen.tooling.DieBaseBuilder.ParentNodeOpt: use PDW project's die part as parent part
DIE - Static variable in class nxopen.tooling.FormingInsertBuilder.ParentTypes: use PDW project's die part as parent part
DIE - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.TargetBinder: For the process, the target of binder is die.
DIE - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.TargetDie: For the process, the target of die is die.
DIE - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.TargetPunch: For the process, the target of punch is die.
die() - Method in interface nxopen.UFSession
DIE_BASE - Static variable in class nxopen.tooling.BurringInsertBuilder.ParentTypes: use PDW project's die base part as parent part
DIE_BASE - Static variable in class nxopen.tooling.FormingInsertBuilder.ParentTypes: use PDW project's die base part as parent part
DIE_BASE_FIRST - Static variable in class nxopen.tooling.DieBaseBuilder.ParentNodeOpt: use PDW project's die base part as parent part
DIE_CAVITY_AND_SLUG_HOLE - Static variable in class nxopen.tooling.PiercingInsertBuilder.Types: the die cavity and slug hole type
DIE_INSERT - Static variable in class nxopen.tooling.PiercingInsertBuilder.DieInsertTypeItems: the die insert type
DIE_INSERT - Static variable in class nxopen.tooling.PiercingInsertBuilder.Types: the die insert type
DIE_PLATE - Static variable in class nxopen.tooling.FormingInsertBuilder.BlankPositions: the blank is on the die plate
DIE_PUNCH - Static variable in class nxopen.die.AddendumSectionBuilder.SegmentType: Update die punch segment.
DIE_REVERSE - Static variable in class nxopen.die.AddendumSectionBuilder.SegmentType: Update die reverse segment.
DIE_SIDE - Static variable in class nxopen.tooling.PiercingInsertBuilder.NormalOffsetSideType: The offset side is die
DIE_TYPE - Static variable in class nxopen.features.sheetmetal.SolidPunchBuilder.Types
DieAssistantFlangeProfile - Interface in nxopen.die: Represents a DieAssistantFlangeProfile
Created in NX5.0.0
DieAssistantFlangeProfileList - Interface in nxopen.die: Represents a list of objects.
DieAssistantFlangeProfileType - Class in nxopen.die: Settings for the flange type.
DieAssistantTrimProfile - Interface in nxopen.die: Represents a DieAssistantTrimProfile
Created in NX5.0.0
DieAssistantTrimProfileList - Interface in nxopen.die: Represents a list of objects.
DieAttributesBuilder - Interface in nxopen.die: Represents a DieAttributesBuilder .
dieBase() - Method in interface nxopen.tooling.DieBaseBuilder: Returns the selected die base.
dieBase() - Method in interface nxopen.tooling.ToolingManager: Returns the DieBaseCollection instance belonging to this part .
DieBaseBuilder - Interface in nxopen.tooling: Represents Progressive Die Wizard and Engineering Die Wizard builder to manage die base.
DieBaseBuilder.AlongDirectionOpt - Class in nxopen.tooling: along direction options.
DieBaseBuilder.CatalogOpt - Class in nxopen.tooling: catalog options.
DieBaseBuilder.DesignToolOption - Class in nxopen.tooling: design tool options.
DieBaseBuilder.DieBaseTypeOpt - Class in nxopen.tooling: die bse types options.
DieBaseBuilder.ParentNodeOpt - Class in nxopen.tooling: parent node options.
DieBaseBuilder.PlatesNumberOpt - Class in nxopen.tooling: plates number options.
DieBaseBuilder.SplitMethod - Class in nxopen.tooling: split method.
DieBaseBuilder.Types - Class in nxopen.tooling: die base types.
DieBaseCollection - Interface in nxopen.tooling: Creates a DieBaseCollection
To obtain an instance of this class, refer to ToolingManager

Created in NX8.0.0
dieBaseData() - Method in interface nxopen.tooling.DieBaseBuilder: The action to edit die base data file.
dieBaseReg() - Method in interface nxopen.tooling.DieBaseBuilder: The action to edit die base register file.
dieBaseToDelete() - Method in interface nxopen.tooling.DieBaseBuilder: Returns the selected die base to delete.
dieBaseType() - Method in interface nxopen.tooling.DieBaseBuilder: Returns the die base type( progressive die, single die, draw die or compound die).
DieBooleanBuilder - Interface in nxopen.die: Represents a DieBooleanBuilder .
DieBooleanBuilder.BooleanType - Class in nxopen.die: boolean type to apply to the selected solids
DieBooleanBuilderList - Interface in nxopen.die: Represents a list of objects.
dieBooleansList() - Method in interface nxopen.die.DieShoeBuilder: Returns the die boolean solids list
License requirements: None.
DieBuildStatusOption - Class in nxopen.die: Settings for the build status of the die design sub features.
dieCenterlineCoordinateSystem() - Method in interface nxopen.die.ClampingSlotBuilder: Returns the die centerline coordinate system for orienting the slot
License requirements: None.
dieCenterlineCoordinateSystem() - Method in interface nxopen.die.HeelpostBuilder: Returns the die centerline coordinate system for orienting the heelpost
License requirements: None.
dieCenterlineCoordinateSystem() - Method in interface nxopen.die.KeywayBuilder: Returns the die centerline coordinate system for orienting the keyway
License requirements: None.
dieCenterlineCsys() - Method in interface nxopen.die.DrawDiePunchBuilder: Returns the die centerline csys of the draw die punch casting.
dieClearance() - Method in interface nxopen.die.PierceHoleChildBuilder: Returns the die clearance of the pierce hole
License requirements: ug_die_design ("Die Design")
.
dieClearance() - Method in interface nxopen.die.PierceHoleParentBuilder: Returns the die clearance of pierce holes
License requirements: ug_die_design ("Die Design")
.
DieCollection - Interface in nxopen.die: Represents a Die Engineering/Design feature builder.
DieDesDrawDieBuilder - Interface in nxopen.tooling: Represents the Die Design draw die management builder, which is to create a draw die by selected sheet body, curve and base plane.
DieDesDrawPunchBuilder - Interface in nxopen.tooling: Die Design draw punch management builder, create a draw die punch by selected sheet body, curve and base plane.
DieDesignLowerBinderBuilder - Interface in nxopen.tooling: Represents a Lower Binder builder
To create a new instance of this class, use AutoDieCollection.createDieDesignLowerBinderBuilder(nxopen.features.Feature)

Created in NX9.0.0
dieDesignSetting() - Method in interface nxopen.tooling.ToolingManager: Returns the DieDesignSettingCollection instance belonging to this part .
DieDesignSettingBuilder - Interface in nxopen.tooling: Represents a DieDesignSettingBuilder This class is for Die Design Setting UI
To create a new instance of this class, use DieDesignSettingCollection.createDieDesignSettingBuilder()

Created in NX7.5.0
DieDesignSettingCollection - Interface in nxopen.tooling: Creates a DieDesignSettingBuilder .
DieDesignTrimPostBuilder - Interface in nxopen.tooling: Represents a Trim Post builder
To create a new instance of this class, use AutoDieCollection.createDieDesignTrimPostBuilder(nxopen.features.Feature)

Created in NX9.0.0
DieDesPierceInsertBuilder - Interface in nxopen.tooling: Represents Die Design Pierce Insert builder.
DieDesPierceInsertBuilder.Direction - Class in nxopen.tooling: Represents the thickness direction.
DieDesPierceInsertBuilder.HoleShapeTypes - Class in nxopen.tooling: Represents the hole shape type.
DieDirectionBuilder - Interface in nxopen.die: Represents a DieDirectionBuilder .
DieDirectionBuilder.DirectionType - Class in nxopen.die: the options available for defining the direction
dieEdge - Variable in class nxopen.die.Tip.MapEdgeData
dieEditOffsetValueTable() - Method in interface nxopen.tooling.PiercingInsertBuilder: Edit offset value table.
dieeng() - Method in interface nxopen.UFSession
DieEngFormTaskBuilder - Interface in nxopen.tooling: Represents a Form Task builder
To create a new instance of this class, use AutoDieCollection.createDieEngFormTaskBuilder(nxopen.features.Feature)
Default values.
DieEngProcessUpdateManagerBuilder - Interface in nxopen.tooling: Die Engineer process update manager management builder.
DieEngProcessUpdateManagerBuilder.Types - Class in nxopen.tooling: the trim task or pierce task.
DieEngStampingCarryoverBuilder - Interface in nxopen.tooling: Represents a Stamping Carryover builder
To create a new instance of this class, use AutoDieCollection.createDieEngStampingCarryoverBuilder(nxopen.features.BodyFeature)

Created in NX10.0.0
DieEngStampingOutputBuilder - Interface in nxopen.tooling: Represents a Stamping Output builder
To create a new instance of this class, use AutoDieCollection.createDieEngStampingOutputBuilder(nxopen.features.BodyFeature)
Default values.
DieEngStampingOutputBuilder.DisplayProductType - Class in nxopen.tooling: Types of product display.
DieEngStampingOutputBuilder.SpringbackMethodType - Class in nxopen.tooling: Types of springback method
DieEngTrimAngleCheck - Interface in nxopen.tooling: Represents a die engineering trim angle check analysis object
To create or edit an instance of this class, use DieEngTrimAngleCheckBuilder

Created in NX8.5.0
DieEngTrimAngleCheckBuilder - Interface in nxopen.tooling: Represents a Trim Angle Check builder
To create a new instance of this class, use AutoDieCollection.createDieEngTrimAngleCheckBuilder(nxopen.geometricanalysis.AnalysisObject)
Default values.
DieEngTrimAngleCheckBuilder.DirectionOptions - Class in nxopen.tooling: Options to determine the method to specify direction.
DieEngTrimTaskBuilder - Interface in nxopen.tooling: Die Engineer trim task management builder, create a trim task by selected die tip, trim bounds, start plane and end plane.
DieEngTrimTaskBuilder.TrimTaskCamType - Class in nxopen.tooling: the trim task cam type.
DieEngTrimTaskBuilder.TrimTaskMatchCutType - Class in nxopen.tooling: the trim task match cut type.
dieInsertType() - Method in interface nxopen.tooling.PiercingInsertBuilder: Returns the die insert type.
DieLimitsBuilder - Interface in nxopen.die: Limits a path to a segment of the path.
DieLimitsBuilderList - Interface in nxopen.die: Represents a list of objects.
DieLocationBuilderList - Interface in nxopen.die: Represents a list of objects.
DieLocationsBuilder - Interface in nxopen.die: Represents a DieLocationsBuilder .
dieOffsetValue() - Method in interface nxopen.tooling.PiercingInsertBuilder: Returns the die offset value.
diePenetration() - Method in interface nxopen.tooling.DieDesPierceInsertBuilder: Returns the die penetration value.
diePitch() - Method in interface nxopen.tooling.MotionSimulationBuilder: Returns the die pitch to calculate controller data.
diePitch02() - Method in interface nxopen.tooling.MotionSimulationBuilder: Returns the die pitch value for second strip, it's used to calculate controller data.
DiePlaneBuilder - Interface in nxopen.die: Represents a DiePlaneBuilder .
DiePlaneBuilder.PlaneType - Class in nxopen.die: the options available for defining the plane
diePlateClearance() - Method in interface nxopen.tooling.BendInsertDesignBuilder: Returns the clearance value of die plate.
diePlateClearance() - Method in interface nxopen.tooling.FormingInsertBuilder: Returns the clearance value of die plate.
diePosition() - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder: Returns the distance value to move die.
dieRadius() - Method in interface nxopen.features.sheetmetal.AeroLighteningCutoutBuilder: Returns the die radius
License requirements: None.
dieRadius() - Method in interface nxopen.features.sheetmetal.BeadBuilder: Returns the bead die radius.
dieRadius() - Method in interface nxopen.features.sheetmetal.GussetBuilder: Returns the die radius value of the sharp edges of the bottom face.
dieRadius() - Method in interface nxopen.features.sheetmetal.LouverBuilder: Returns the die radius.
dieRadius() - Method in interface nxopen.features.sheetmetal.SolidPunchBuilder: Returns the Radius value of the sharp edges of the bottom face
License requirements: None.
dieRadius - Variable in class nxopen.uf.UFModl.SmpunchData
dies() - Method in interface nxopen.features.FeatureCollection: Returns the DieCollection instance belonging to this part .
dieSameOffsetValue() - Method in interface nxopen.tooling.PiercingInsertBuilder: Returns the same offset value option of die design.
dieSheet() - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder: Returns the die sheet.
dieShoe(DieShoe) - Method in interface nxopen.die.DieCollection: Creates a die_shoe feature builder DieShoeBuilder .
DieShoe - Interface in nxopen.die: Represents a die shoe feature
To create or edit an instance of this class, use DieShoeBuilder

Created in NX6.0.0
DieShoeBuilder - Interface in nxopen.die: Represents a Die Shoe feature builder.
DieSimCollection - Interface in nxopen.die: Represents a collection of Die Simulation - Press Models
To obtain an instance of this class, refer to Part

Created in NX6.0.0
dieSimData() - Method in interface nxopen.Part: Returns the Die.DieSimCollection instance belonging to this part
Created in NX3.0.0
dieTip() - Method in interface nxopen.tooling.DieEngFormTaskBuilder: Returns the die tip selection.
dieTip() - Method in interface nxopen.tooling.DieEngStampingCarryoverBuilder: Returns the die tip
License requirements: None.
DIFFERENCE - Static variable in class nxopen.cae.PostGraphAcrossIterationsBuilder.CombinationMethod
DIFFERENCE - Static variable in class nxopen.cae.ResultProbeBuilder.CombineAcrossEntities
DIFFERENT - Static variable in class nxopen.validate.XmlComparator.Result: Represents two xml files are different
DIFFERENT_CONVEXITY_ROLL_OVER - Static variable in class nxopen.features.EdgeBlendBuilder.Overlap: If different convexity,roll over
differentColorsAsBoundaryFacesOption() - Method in interface nxopen.tooling.MWSearchRegionBuilder: Returns the option to use different colors as boundary faces
License requirements: None.
DIFFUSE_ABSORBED_HEAT_FLUX - Static variable in class nxopen.cae.Result.Quantity
DIFFUSE_HEAT_FLUX - Static variable in class nxopen.cae.Result.Quantity
DIFFUSE_INCIDENT_HEAT_FLUX - Static variable in class nxopen.cae.Result.Quantity
DIFFUSE_REFLECTED_HEAT_FLUX - Static variable in class nxopen.cae.Result.Quantity
DIFFUSE_TRANSMITTED_HEAT_FLUX - Static variable in class nxopen.cae.Result.Quantity
diffuseFactor - Variable in class nxopen.DisplayManager.J3dMaterial: diffuse reflection coeficient
DIM_AND_NON_SELECTABLE - Static variable in class nxopen.preferences.SessionWorkPlane.ObjectDisplay: Deprecated.

Dim and Non Selectable
DIM_AND_SELECTABLE - Static variable in class nxopen.preferences.SessionWorkPlane.ObjectDisplay: Deprecated.

Dim and Selectable
DIM_CONS - Static variable in class nxopen.uf.UFSket.ConClass
DIM_DIAMETER - Static variable in class nxopen.uf.UFDisp.PolyMarker
DIM_DIAMETER - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
DIM_PARALLEL - Static variable in class nxopen.uf.UFDisp.PolyMarker
DIM_PARALLEL - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
DIM_PERPENDICULAR - Static variable in class nxopen.uf.UFDisp.PolyMarker
DIM_PERPENDICULAR - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
DIM_RADIUS - Static variable in class nxopen.uf.UFDisp.PolyMarker
DIM_RADIUS - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
DIM_TEXT - Static variable in class nxopen.uf.UFDrf.TextType
dimAngularFormatTolerance - Variable in class nxopen.uf.UFDrf.UnitsFormatPreferences
dimAppendedTextSpaceFactor() - Method in interface nxopen.annotations.LetteringPreferences: Returns the dimension/appended text space factor
License requirements: None.
dimAppTextSpaceFactor - Variable in class nxopen.uf.UFDrf.LetteringPreferences
dimArrowDisplay() - Method in interface nxopen.annotations.DimensionStyleBuilder: Returns the dimension arrow display option
License requirements: None.
dimBalFirst() - Method in interface nxopen.tooling.LayoutBuilder: Returns the first dimension for balance transform
License requirements: None.
dimBalSecond() - Method in interface nxopen.tooling.LayoutBuilder: Returns the second dimension for balance transform
License requirements: None.
dimCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder: Returns the dim compare
License requirements: None.
dimDimLineSpaceFactor() - Method in interface nxopen.annotations.LetteringPreferences: Returns the dimension/dimension line space factor
License requirements: None.
dimDimLineSpaceFactor - Variable in class nxopen.uf.UFDrf.LetteringPreferences
DIMENSION - Static variable in class nxopen.annotations.ArcComponent.ArcType: dimension arc
dimension - Variable in class nxopen.annotations.CharacterSpaceFactor: Standard Font Character Space Factor for Dimension Text
Dimension - Interface in nxopen.annotations: Represents a dimension
Abstract class
.
DIMENSION - Static variable in class nxopen.annotations.PmiFilterByType.Type: Indicates a PMI dimension type
DIMENSION - Static variable in class nxopen.annotations.SearchModelViewBuilder.PmiTypes: dimension type
DIMENSION - Static variable in class nxopen.CGMBuilder.SizeOption: Dimension, uses the units along with X and Y dimensions to determine CGM size
dimension() - Method in interface nxopen.features.EditDimensionBuilder: Returns the feature dimension
License requirements: None.
DIMENSION - Static variable in class nxopen.layout2d.Layout2dComponentMemberType
DIMENSION - Static variable in class nxopen.PrintPDFBuilder.SizeOption: Dimension
DIMENSION - Static variable in class nxopen.Sketch.ConstraintClass: A dimensional constraint
dimension - Variable in class nxopen.uf.UFSf.AskElementData
Dimension.DimensionTextData - Class in nxopen.annotations: This class holds the data returned from Dimension.getDimensionText()
Dimension.MeasurementTypes - Class in nxopen.annotations: Specifies dimension measurement types
DIMENSION0D - Static variable in class nxopen.uf.UFSf.MeshDimension
DIMENSION1D - Static variable in class nxopen.uf.UFSf.MeshDimension
DIMENSION2D - Static variable in class nxopen.uf.UFSf.MeshDimension
DIMENSION3D - Static variable in class nxopen.uf.UFSf.MeshDimension
DIMENSION_ANY - Static variable in class nxopen.uf.UFSf.MeshDimension
DIMENSION_LABEL - Static variable in class nxopen.uf.UFConstants
DIMENSION_TEXT_ALIGNED - Static variable in class nxopen.uf.UFDrf.DimensionOrientation
DIMENSION_TEXT_BY_ANGLE - Static variable in class nxopen.uf.UFDrf.DimensionOrientation
DIMENSION_TEXT_HORIZONTAL - Static variable in class nxopen.uf.UFDrf.DimensionOrientation
DIMENSION_TEXT_OVER_DIMENSION_LINE - Static variable in class nxopen.uf.UFDrf.DimensionOrientation
DIMENSION_TEXT_PERPENDICULAR - Static variable in class nxopen.uf.UFDrf.DimensionOrientation
DIMENSIONAL_MARKUP_LANGUAGE - Static variable in class nxopen.cam.InspectionAnalyzeOutputBuilder.OutputFormatType: DML
dimensionalConstraint() - Method in interface nxopen.InferredConstraintsBuilder: Returns the dimensional constraint infer-constraint setting.
dimensionality() - Method in interface nxopen.Scalar: Returns the dimensionality of a scalar.
dimensionality - Variable in class nxopen.uf.UFModeling.AskObjDimensionalityData
dimensionalityAsString() - Method in interface nxopen.blockstyler.ExpressionBlock: Returns the Dimensionality as string.
dimensionAngularFormat() - Method in interface nxopen.annotations.UnitsStyleBuilder: Returns the dimension angular format and precision
License requirements: None.
dimensionAngularFormat - Variable in class nxopen.uf.UFDrf.UnitsFormatPreferences
dimensionArrowheadType() - Method in interface nxopen.annotations.NarrowDimensionPreferences: Returns the dimension arrowhead type when no space for normal arrowheads
License requirements: None.
DimensionBuilder - Interface in nxopen.features: Represents a DimensionBuilder
The sub-class should create an instance of corresponding object
Default values.
dimensionCharacterSize() - Method in interface nxopen.tooling.AutoDimensionBuilder: Returns the tolerance character size
License requirements: None.
DimensionCollection - Interface in nxopen.annotations: Represents a collection of Dimension objects
This is an collection class.
dimensionColor() - Method in interface nxopen.preferences.PartSketch: Returns the sketch dimension color
License requirements: None.
dimensionColor() - Method in interface nxopen.tooling.AutoDimensionBuilder: Returns the dimension color
License requirements: None.
DimensionData - Interface in nxopen.annotations: Represents dimension data .
DimensionData() - Constructor for class nxopen.uf.UFModl.DimensionData
DimensionData(int, Tag, double, double[], double[], double[], double, double, Tag, String, Tag[], int, UFCurve.Line, UFCurve.Line) - Constructor for class nxopen.uf.UFModl.DimensionData
dimensionDecimalPlaces() - Method in interface nxopen.annotations.AngularTolerance: Returns the number of decimal places for dimension
License requirements: None.
dimensionDisplayOption() - Method in interface nxopen.annotations.NarrowDimensionPreferences: Returns the dimension display option
License requirements: None.
DimensionGeometry() - Constructor for class nxopen.Sketch.DimensionGeometry
DimensionGeometry(NXObject, Sketch.AssocType, int, Point3d, NXObject) - Constructor for class nxopen.Sketch.DimensionGeometry: Constructor for the DimensionGeometry object.
dimensionLabel() - Method in interface nxopen.preferences.SessionSketch: Returns the dimension label
License requirements: None.
dimensionLabel() - Method in interface nxopen.preferences.SketchPreferences: Returns the dimension label.
dimensionLeaderAngle() - Method in interface nxopen.annotations.NarrowDimensionPreferences: Returns the dimension leader angle
License requirements: None.
dimensionLeadingZero() - Method in interface nxopen.annotations.UnitsFormatPreferences: Returns the dimension leading zero display property
License requirements: None.
dimensionLine - Variable in class nxopen.uf.UFDrf.AssociativeOrigin
dimensionLinearUnits() - Method in interface nxopen.annotations.UnitsStyleBuilder: Returns the dimension linear units
License requirements: None.
dimensionLinearUnits - Variable in class nxopen.uf.UFDrf.UnitsFormatPreferences
dimensionLocation() - Method in interface nxopen.features.DimensionBuilder: Returns the dimension location/placement controlled by the annotation origin block
License requirements: None.
DimensionMeasurementBuilder - Interface in nxopen.annotations: Represents a DimensionMeasurementBuilder
This is a sub-builder class and cannot be directly instantiated

Created in NX9.0.0
DimensionMeasurementBuilder.MeasurementMethod - Class in nxopen.annotations: measurement method for the dimensions
dimensionNxTextCharacterSpaceFactor() - Method in interface nxopen.annotations.LetteringStyleBuilder: Returns the dimension NX text character space factor.
dimensionOffset() - Method in interface nxopen.annotations.DimensionSet: Returns the dimension offset
License requirements: None.
dimensionOrientation() - Method in interface nxopen.features.LinearDimensionBuilder: Returns the OrientXpress that is employed in the ADM Linear Dimension Feature
License requirements: None.
dimensionOrientationVector() - Method in interface nxopen.features.LinearDimensionBuilder: Returns the dimension orientation vector for the Linear Dimension
License requirements: None.
dimensionOrSet() - Method in interface nxopen.annotations.DimensionSetBuilder: Returns the dimension or dimension set object
License requirements: None.
dimensionPlane() - Method in interface nxopen.features.RadialDimensionBuilder: Returns the dimension plane
License requirements: None.
DimensionPreferences - Interface in nxopen.annotations: Represents dimension preferences .
DimensionPreferences() - Constructor for class nxopen.uf.UFDrf.DimensionPreferences
DimensionPreferences(UFDrf.ToleranceType, double, double, double, double, double, double, int, int, int, int, int, int, UFDrf.FractionDenominator, UFDrf.FractionDenominator, UFDrf.TextArrowPlacement, UFDrf.ExtensionLineDisplay, UFDrf.ArrowDisplay, boolean, UFDrf.DimensionOrientation, double, double, double, UFDrf.NarrowDimensionInfo, UFDrf.ArrowheadAndFillType, UFDrf.ChamferDimensionData, UFDrf.InspectionType, UFDrf.ReferenceSymbolType, UFDrf.TrimDimLineStyle) - Constructor for class nxopen.uf.UFDrf.DimensionPreferences
DimensionPreferences1() - Constructor for class nxopen.uf.UFDrf.DimensionPreferences1
DimensionPreferences1(UFDrf.ToleranceType, double, double, double, double, double, double, int, int, int, int, int, int, UFDrf.FractionDenominator, UFDrf.FractionDenominator, UFDrf.TextArrowPlacement, UFDrf.ExtensionLineDisplay, UFDrf.ArrowDisplay, boolean, UFDrf.DimensionOrientation, double, double, double, UFDrf.NarrowDimensionInfo, UFDrf.ArrowheadAndFillType, UFDrf.ChamferDimensionData, UFDrf.InspectionType, UFDrf.ReferenceSymbolType, UFDrf.TrimDimLineStyle) - Constructor for class nxopen.uf.UFDrf.DimensionPreferences1
dimensionRule() - Method in interface nxopen.drafting.RulesBuilder: Returns the dimension rule
License requirements: None.
DIMENSIONS - Static variable in class nxopen.cam.LaserCutoutDefinition.Types: Dimensions
dimensions() - Method in interface nxopen.Part: Returns the DimensionCollection instance belonging to this part .
dimensions() - Method in interface nxopen.tooling.AutoDimensionBuilder: Returns the selected dimensions to edit
License requirements: None.
dimensions - Variable in class nxopen.uf.UFAssem.IsetArrayData
dimensions - Variable in class nxopen.uf.UFAssem.McArrayData
Dimensions() - Constructor for class nxopen.uf.UFCgm.Dimensions
Dimensions(UFCgm.Units, double[]) - Constructor for class nxopen.uf.UFCgm.Dimensions
dimensions - Variable in class nxopen.uf.UFCgm.Dimensions
dimensions - Variable in class nxopen.uf.UFCgm.Size
dimensionSet() - Method in interface nxopen.annotations.BaseLinearDimensionBuilder: Returns the dimension set
License requirements: None.
DimensionSet - Interface in nxopen.annotations: Represents a dimension set
This is an abstract class.
DimensionSetBuilder - Interface in nxopen.annotations: Represents a DimensionSetBuilder
This is a sub-builder class and cannot be directly instantiated

Created in NX9.0.0
DimensionSetBuilder.DimensionSetMethod - Class in nxopen.annotations: dimension set method
DimensionSetCollection - Interface in nxopen.annotations: Represents a collection of DimensionSet objects
To obtain an instance of this class, refer to AnnotationManager

Created in NX4.0.0
dimensionSets() - Method in interface nxopen.annotations.AnnotationManager: DimensionSet collection .
dimensionStandardTextCharacterSpaceFactor() - Method in interface nxopen.annotations.LetteringStyleBuilder: Returns the dimension Standard text character space factor.
dimensionState() - Method in interface nxopen.SketchDimensionalConstraint: Returns the dimension status.
dimensionStyle() - Method in interface nxopen.annotations.StyleBuilder: Returns the dimension style builder
License requirements: None.
DimensionStyleBuilder - Interface in nxopen.annotations: Represents a DimensionStyleBuilder .
dimensionTags - Variable in class nxopen.uf.UFGdt.AnnotationTags
dimensionText - Variable in class nxopen.uf.UFDrf.LetteringPreferences
dimensionTextAspectRatio() - Method in interface nxopen.annotations.LetteringStyleBuilder: Returns the dimension text aspect ratio.
dimensionTextCharSpaceFactor() - Method in interface nxopen.annotations.LetteringStyleBuilder: Returns the dimension text space factor.
dimensionTextColor() - Method in interface nxopen.annotations.LetteringStyleBuilder: Returns the dimension text color
License requirements: None.
DimensionTextData() - Constructor for class nxopen.annotations.Dimension.DimensionTextData
dimensionTextFont() - Method in interface nxopen.annotations.LetteringStyleBuilder: Returns the dimension text font
License requirements: None.
DimensionTextFormat - Class in nxopen.annotations: Specifies the dimension text format
dimensionTextItalicized() - Method in interface nxopen.annotations.LetteringStyleBuilder: Returns the dimension text italic status
License requirements: None.
dimensionTextLineSpaceFactor() - Method in interface nxopen.annotations.LetteringStyleBuilder: Returns the dimension text line space factor
License requirements: None.
dimensionTextLineWidth() - Method in interface nxopen.annotations.LetteringStyleBuilder: Returns the dimension text line width.
dimensionTextOffset() - Method in interface nxopen.annotations.NarrowDimensionPreferences: Returns the dimension text offset
License requirements: None.
dimensionTextOrientation() - Method in interface nxopen.annotations.NarrowDimensionPreferences: Returns the dimension text orientation
License requirements: None.
dimensionTextSize() - Method in interface nxopen.annotations.LetteringStyleBuilder: Returns the dimension text character size
License requirements: None.
dimensionTolerancePlacement() - Method in interface nxopen.annotations.UnitsStyleBuilder: Returns the dimension tolerance placement relative to the dimension value
License requirements: None.
dimensionTolerancePlacement - Variable in class nxopen.uf.UFDrf.UnitsFormatPreferences
DimensionType - Class in nxopen.annotations: Specifies the type of dimension being created
dimensionType() - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder: Returns the dimension type
License requirements: None.
dimensionType() - Method in interface nxopen.features.sheetmetal.DimpleBuilder: Returns the Offset Dimension
The actual extent distance of the Dimple will be determined by the active dimension option.
dimensionType() - Method in interface nxopen.features.sheetmetal.JogBuilder: Returns the Offset Dimension
The actual extent distance of the Jog will be determined by the active dimension option.
dimensionType() - Method in interface nxopen.SketchAutoDimensionBuilder: Returns the enum dim type
License requirements: None.
DimensionUnit - Class in nxopen.annotations: Specifies the dimension unit
dimensionValue() - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder: Returns the dimension value
License requirements: None.
dimensionValueDp - Variable in class nxopen.uf.UFDrf.DimensionPreferences
dimensionValueDp - Variable in class nxopen.uf.UFDrf.DimensionPreferences1
dimensionValuePrecision() - Method in interface nxopen.annotations.DimensionStyleBuilder: Returns the dimension value precision
License requirements: None.
dimensionValueType() - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder: Returns the dimension value enum
License requirements: None.
dimensionWorkflow() - Method in interface nxopen.drafting.PreferencesBuilder: Returns the Dimension Workflow builder
License requirements: None.
DimensionWorkflowBuilder - Interface in nxopen.annotations: Represents a Annotations WorkFlowBuilder.
dimExp - Variable in class nxopen.uf.UFSket.ReadDimensionData
dimFractionDenominator - Variable in class nxopen.uf.UFDrf.DimensionPreferences
dimFractionDenominator - Variable in class nxopen.uf.UFDrf.DimensionPreferences1
dimInfo - Variable in class nxopen.uf.UFDrf.AskDimInfoData
DimInfo() - Constructor for class nxopen.uf.UFDrf.DimInfo
DimInfo(int, UFDrf.DraftAidTextInfo[], int, UFDrf.DimLineInfo[], int, UFDrf.ArcInfo[], int, UFDrf.ArrowInfo[]) - Constructor for class nxopen.uf.UFDrf.DimInfo
dimInspectionType - Variable in class nxopen.uf.UFDrf.DimensionPreferences
dimInspectionType - Variable in class nxopen.uf.UFDrf.DimensionPreferences1
dimLabel - Variable in class nxopen.uf.UFSket.AskLegacyPreferencesData
dimLabel - Variable in class nxopen.uf.UFSket.AskPreferencesData
dimLineInfo - Variable in class nxopen.uf.UFDrf.DimInfo
DimLineInfo() - Constructor for class nxopen.uf.UFDrf.DimLineInfo
DimLineInfo(UFDrf.DraftAidLine, int, UFDrf.AssocInfo[]) - Constructor for class nxopen.uf.UFDrf.DimLineInfo
dimLineSpaceFactor() - Method in interface nxopen.annotations.LetteringStyleBuilder: Returns the dimension line space factor.
DimObject() - Constructor for class nxopen.uf.UFSket.DimObject
DimObject(Tag, UFSket.AssocType, int) - Constructor for class nxopen.uf.UFSket.DimObject
dimObject1 - Variable in class nxopen.uf.UFSket.ReadDimensionData
dimObject2 - Variable in class nxopen.uf.UFSket.ReadDimensionData
dimObjs - Variable in class nxopen.uf.UFSket.ReadDimensionalConstraintData
dimOption - Variable in class nxopen.uf.UFNxsm.FlangeSketchData
dimOrigin - Variable in class nxopen.uf.UFDrf.AskDimInfoData
dimOrigin - Variable in class nxopen.uf.UFSket.ReadDimensionalConstraintData
dimOrigin - Variable in class nxopen.uf.UFSket.ReadDimensionData
dimOriginCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder: Returns the dim origin compare
License requirements: None.
Dimple - Interface in nxopen.features: Represents a Dimple feature
To create or edit an instance of this class, use DimpleBuilder

Created in NX5.0.0
DimpleBuilder - Interface in nxopen.features.sheetmetal: Represents a Dimple feature builder.
DimpleBuilder.DepthTypeOptions - Class in nxopen.features.sheetmetal: This enum represents the depth direction for the dimple.
DimpleBuilder.DimensionTypeOptions - Class in nxopen.features.sheetmetal: the Dimension options for dimple.
DimpleBuilder.SectionSideOptions - Class in nxopen.features.sheetmetal: This enum represents the side of the section that the dimple punches material.
DimpleBuilder.SidewallTypeOptions - Class in nxopen.features.sheetmetal: the side walls material option.
dimPrecision - Variable in class nxopen.uf.UFGdt.LimitsAndFitsData
dimReferenceType - Variable in class nxopen.uf.UFDrf.DimensionPreferences
dimReferenceType - Variable in class nxopen.uf.UFDrf.DimensionPreferences1
dimRetainedStatusCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder: Returns the dim retained status compare
License requirements: None.
dimSizeCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder: Returns the dim size compare
License requirements: None.
dimSubtype - Variable in class nxopen.uf.UFDrf.AskDimInfoData
dimTag - Variable in class nxopen.uf.UFSket.ReadDimensionalConstraintData
dimTags - Variable in class nxopen.uf.UFSket.AskDimensionsOfSketchData
dimTolerance() - Method in interface nxopen.tooling.CalculateAreaBuilder: Returns the dim tolerance used as the area calculation tolerance.
dimToleranceTextSpaceFactor() - Method in interface nxopen.annotations.LetteringPreferences: Returns the dimension/tolerance text space factor
License requirements: None.
dimTolTextSpaceFactor - Variable in class nxopen.uf.UFDrf.LetteringPreferences
dimType - Variable in class nxopen.uf.UFSket.ReadDimensionalConstraintData
dimType - Variable in class nxopen.uf.UFSket.ReadDimensionData
dimX() - Method in interface nxopen.tooling.LayoutRepositionBuilder: Returns the distance dimension in X-axis
License requirements: None.
dimXdist() - Method in interface nxopen.tooling.LayoutBuilder: Returns the cavity distance dimension in X-axis
License requirements: None.
dimY() - Method in interface nxopen.tooling.LayoutRepositionBuilder: Returns the distance dimension in Y-axis
License requirements: None.
dimYdist() - Method in interface nxopen.tooling.LayoutBuilder: Returns the cavity distance dimension in Y-axis
License requirements: None.
dimZeroToleranceDisplayStyle() - Method in interface nxopen.annotations.DimensionStyleBuilder: Returns the dimension zero tolerance display style
License requirements: None.
DIN - Static variable in class nxopen.annotations.SurfaceFinishBuilder.StandardType: DIN
DIN - Static variable in class nxopen.annotations.SurfaceFinishStandard: DIN
DIN - Static variable in class nxopen.annotations.WeldStandard: DIN standard
DIN2002 - Static variable in class nxopen.annotations.SurfaceFinishBuilder.StandardType: DIN 2002
DIN2002 - Static variable in class nxopen.annotations.SurfaceFinishStandard: DIN 2002
dir - Variable in class nxopen.facet.FacetedFace.SurfaceData
dir - Variable in class nxopen.uf.UFFacet.AskSurfaceDataForFaceData
dir - Variable in class nxopen.uf.UFModeling.AskFaceData
dir - Variable in class nxopen.uf.UFModl.AskSweepDirectionData
dir - Variable in class nxopen.uf.UFModl.StringList
DIRECT - Static variable in class nxopen.cam.BoundaryMemberSet.ConnectMemberType: direct
DIRECT - Static variable in class nxopen.cam.LaserLinearMove.MoveTypes: Direct
DIRECT - Static variable in class nxopen.cam.NcmPlanarBuilder.TransferBetweenLevelsTypes: direct
DIRECT - Static variable in class nxopen.cam.NcmPlanarBuilder.TransferBetweenRegionsTypes: direct
DIRECT - Static variable in class nxopen.cam.NcmPlanarBuilder.TransferWithinLevelsTypes: direct
DIRECT - Static variable in class nxopen.cam.NcmTransfer.TransferTypes: direct
DIRECT - Static variable in class nxopen.cam.NcmTransferBuilder.TraverseTypes: traverse direct
DIRECT - Static variable in class nxopen.cam.NcmTurnThreadBuilder.LocalReturnTypes: Direct
DIRECT - Static variable in class nxopen.cam.NcmWedmBuilder.LeadInMethodTypes: direct lead in
DIRECT - Static variable in class nxopen.cam.NcmWedmBuilder.LeadOutMethodTypes: direct lead out
DIRECT - Static variable in class nxopen.cam.OperationBuilder.OptimizationDistanceTypes: direct
DIRECT - Static variable in class nxopen.cam.ProbeProtectedParametersBuilder.AppMethodTypes: direct
DIRECT - Static variable in class nxopen.cam.TeachmodeLinearMoveBuilder.MoveTypes: Direct
DIRECT - Static variable in class nxopen.cam.ToolPathEditorBuilder.ConnectionMethodType
DIRECT - Static variable in class nxopen.cam.ToolPathSplitBuilder.TransferTypes: direct transfer type
DIRECT - Static variable in class nxopen.cam.ToolPathSplitParametersBuilder.TransferTypes: direct transfer type
DIRECT - Static variable in class nxopen.cam.TurnAvoidanceGohomeBuilder.GohomePointMotionTypes: Motion type: Direct to point.
DIRECT - Static variable in class nxopen.cam.TurnAvoidancePathPointsBuilder.MotionTypes: Motion to Point: Direct
DIRECT - Static variable in class nxopen.cam.TurnAvoidanceReturnBuilder.ReturnPointMotionTypes: Motion type: Direct to point.
DIRECT - Static variable in class nxopen.cam.TurnAvoidanceStartBuilder.StartPointMotionTypes: Motion type: Direct to point.
DIRECT - Static variable in class nxopen.cam.TurnAvoidanceStartOfEngageBuilder.StartOfEngageMotionTypes: Motion type: Direct to start of engage.
DIRECT - Static variable in class nxopen.cam.TurnMoveToPointBuilder.DirectionTypes: direct
DIRECT - Static variable in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.ReturnMoveModeTypes: Return Move: Direct
DIRECT - Static variable in class nxopen.cam.TurnRoughFinishTestCut.ReturnMoveTypes: Test Cut Return Move: Direct
DIRECT - Static variable in class nxopen.die.FlangeTaskBuilder.CamTypes: Direct
DIRECT - Static variable in class nxopen.die.PierceTaskBuilder.CamTypes: Direct
DIRECT - Static variable in class nxopen.die.TrimTaskBuilder.CamTypes: Direct
DIRECT - Static variable in class nxopen.preferences.SessionModeling.SketchEditType: Edit sketch without entering task environment
DIRECT - Static variable in class nxopen.routing.HealMethod
DIRECT - Static variable in class nxopen.tooling.DieEngTrimTaskBuilder.TrimTaskCamType
DIRECT - Static variable in class nxopen.weld.DatumSurfaceBuilder.Types: direct location
DIRECT_ON_PART - Static variable in class nxopen.cam.LevelToLevel.Types: Direct on part
DIRECTED - Static variable in class nxopen.annotations.Dimension.MeasurementTypes: Directed
DIRECTED - Static variable in class nxopen.annotations.SearchCriteriaDimensionBuilder.MeasurementTypes: Linear Directed
DIRECTED_DATUM - Static variable in class nxopen.uf.UFGdt.DatumAssocType
DIRECTED_DIMENSION_TYPE - Static variable in class nxopen.uf.UFGdt.ToleranceType
direction() - Method in interface nxopen.annotations.DimensionMeasurementBuilder: Returns the measurement direction when using DimensionMeasurementBuilder.MeasurementMethod.POINT_TO_POINT (optional)
License requirements: None.
direction - Variable in class nxopen.assemblies.ClearanceSet.InterferenceData: a unit vector indicating the direction of penetration
DIRECTION - Static variable in class nxopen.cae.ElementTranslateBuilder.MethodType: translate along a vector
direction() - Method in interface nxopen.cae.optimization.TBSShapeLinkCondition: Returns the direction or the axis, which is avaliable when CAE.Optimization.TBSShapeLinkCondition#manufacturingType and CAE.Optimization.TBSShapeLinkCondition#setManufacturingType is set to CAE.Optimization.TBSShapeLinkCondition.ManufacturingOption#SURFACE_STAMP , or CAE.Optimization.TBSShapeLinkCondition.ManufacturingOption#SURFACE_DEMOLD , or CAE.Optimization.TBSShapeLinkCondition.ManufacturingOption#ROTATION_SYMMETRY ,or CAE.Optimization.TBSShapeLinkCondition.ManufacturingOption#SURFACE_TURN , or CAE.Optimization.TBSShapeLinkCondition.ManufacturingOption#SURFACE_DRILL
License requirements: None.
direction - Variable in class nxopen.cae.Post.StreamlineExtraction
DIRECTION - Static variable in class nxopen.cae.responsesimulation.SensorType
direction() - Method in interface nxopen.cae.xyplot.LineStyle3DSetting: Returns the line direction
License requirements: None.
direction() - Method in interface nxopen.cae.xyplot.PlateStyle3DSetting: Returns the plate direction
License requirements: None.
direction() - Method in interface nxopen.cam.RoughTurningBuilder: Returns the Rough Direction
License requirements: None.
direction() - Method in interface nxopen.cam.SurfaceRegions: Returns the direction
License requirements: None.
direction() - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder: Returns the direction builder
License requirements: None.
direction() - Method in interface nxopen.cam.TurnMoveToPointBuilder: Returns the move direction
License requirements: None.
direction() - Method in interface nxopen.cam.TurnProbeInspectPointMoveBuilder: Returns the probing direction
License requirements: None.
direction() - Method in interface nxopen.cam.TurnRoughFinishTestCut: Returns the test cut direction
License requirements: None.
direction - Variable in class nxopen.die.CastReliefParentBuilder.CastReliefData: Profile direction.
direction - Variable in class nxopen.die.ConnectProfileParentBuilder.ProfileData: profile direction
direction - Variable in class nxopen.die.DeckParentBuilder.MainDeckData: Profile direction.
direction() - Method in interface nxopen.die.DieDirectionBuilder: Returns the selected direction
License requirements: None.
direction - Variable in class nxopen.die.DrawDiePunchBuilder.PunchProfileData: Profile direction.
direction - Variable in class nxopen.die.FillBuilder.RegionBoundsData: Profile direction
direction - Variable in class nxopen.die.FlangeTaskBuilder.RegionBoundsData: Profile direction
direction - Variable in class nxopen.die.FormTaskBuilder.RegionBoundsData: Profile direction.
direction - Variable in class nxopen.die.PadChildBuilder.ShapeData: Profile direction.
direction - Variable in class nxopen.die.PierceHoleChildBuilder.PierceHoleShapeData: profile direction
direction - Variable in class nxopen.die.PierceTaskBuilder.PierceBoundsData: Profile direction
direction - Variable in class nxopen.die.RibChildBuilder.CenterlineData: Profile direction.
direction - Variable in class nxopen.die.RotorBuilder.FlangeBendProfileData: Profile direction.
direction - Variable in class nxopen.die.SteelInsertBuilder.MainProfileData: profile direction
direction - Variable in class nxopen.die.TrimTaskBuilder.TrimBoundsData: Profile direction
direction() - Method in interface nxopen.facet.BestFitAlignBuilder: Returns the plane or line direction
License requirements: None.
direction() - Method in interface nxopen.facet.ExtrudeFacetBodyBuilder: Returns the direction used when limit type is ExtrudeFacetBodyBuilder.LimitType.DISTANCE
License requirements: None.
direction() - Method in interface nxopen.facet.ExtrudeProfileBuilder: Returns the extrude direction
License requirements: None.
direction() - Method in interface nxopen.features.CylinderBuilder: Returns the cylinder direction
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
.
direction() - Method in interface nxopen.features.DraftBuilder: Returns the smart direction for draft
License requirements: solid_modeling ("SOLIDS MODELING")
.
direction() - Method in interface nxopen.features.EmbossJoggle: Returns the direction for joggle
License requirements: None.
direction() - Method in interface nxopen.features.EmbossLimit: Returns the direction for translation
License requirements: None.
direction() - Method in interface nxopen.features.EmbossRegion: Returns the default direction
License requirements: None.
direction() - Method in interface nxopen.features.EmbossSidewall: Returns the draw direction for sidewall
License requirements: None.
direction() - Method in interface nxopen.features.ExtrudeBuilder: Returns the extrude direction
License requirements: None.
direction() - Method in interface nxopen.features.IsoparametricCurvesBuilder: Returns the direction type
License requirements: None.
direction() - Method in interface nxopen.features.MoveFaceBuilder: Returns the vector for direction and distance option, don't use it until nx502
License requirements: None.
direction() - Method in interface nxopen.features.OffsetFaceBuilder: Returns the direction
License requirements: None.
direction() - Method in interface nxopen.features.OvercrownBuilder: Returns the direction of deformation.
direction() - Method in interface nxopen.features.sheetmetal.BendBuilder: Returns the Bend Direction
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
direction - Variable in class nxopen.features.sheetmetal.GussetBuilder.PlacementOriginAndDirectionData: Direction along which the placement distance is measured.
direction() - Method in interface nxopen.features.shipdesign.PillarBuilder: Returns the direction of the pillar.
direction() - Method in interface nxopen.features.shipdesign.PillarSystemBuilder: Returns the direction of the pillar.
direction() - Method in interface nxopen.features.shipdesign.TraceLinesBuilder: Returns the direction
License requirements: None.
direction() - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord: Deprecated.
Deprecated in NX8.5.0. Use CurveAnalysisDisplay .
direction() - Method in interface nxopen.geometricutilities.BlendSetbackBuilder: Returns the direction type
License requirements: None.
direction() - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusBuilder: Returns the direction which specifies concave face respect to the body face normal
License requirements: None.
direction() - Method in interface nxopen.mechatronics.BreakingConstraintBuilder: Returns the direction.
direction() - Method in interface nxopen.mechatronics.VirtualAxisBuilder: Returns the direction
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
direction() - Method in interface nxopen.motion.BushingDefine: Returns the direction
License requirements: None.
DIRECTION - Static variable in class nxopen.motion.CurveContactBuilder.GeometryMaterialSide
direction - Variable in class nxopen.motion.PackagingMeasureBuilder.GeometryData: Direction tag
direction() - Method in interface nxopen.motion.VObject: Returns the direction
License requirements: None.
direction - Variable in class nxopen.routing.EditLineSegmentBuilder.OrientationData: The direction of the line (unit vector).
direction - Variable in class nxopen.routing.SegmentManager.SubdivideOption: Direction; If direction = 1, normal curve direction else if direction = -1, reverse the sense of curve direction
direction - Variable in class nxopen.Section.StartAndDirectionData: The direction of the vector defines the direction of the section.
direction - Variable in class nxopen.Section.StartAndDirectionOfLoopData: The direction of the vector defines the direction of the loop of the section specified by the index.
direction() - Method in interface nxopen.sim.KinematicAxisBuilder: Returns the axis direction
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
direction - Variable in class nxopen.uf.UFCurve.AskIsoclineData
direction - Variable in class nxopen.uf.UFCurve.SectionPerpcrvData
direction - Variable in class nxopen.uf.UFGdt.LeaderSpec
direction - Variable in class nxopen.uf.UFGdt.ProjZone
direction - Variable in class nxopen.uf.UFModl.AskExtrudeOffsetDirData
direction - Variable in class nxopen.uf.UFModl.AskExtrusionData
direction - Variable in class nxopen.uf.UFModl.AskRevolutionData
direction - Variable in class nxopen.uf.UFModlFeatures.AskDatumPointAndDirectionData
direction - Variable in class nxopen.uf.UFMotion.VectorForceTorque
direction - Variable in class nxopen.uf.UFPath.SpindleOn
direction - Variable in class nxopen.uf.UFSim.AskAxisDofJunctionData
direction - Variable in class nxopen.uf.UFSo.SplineData
direction - Variable in class nxopen.uf.UFSubdiv.Isocline
direction - Variable in class nxopen.uf.UFUi.SpecifyVectorData
direction1() - Method in interface nxopen.features.CombinedProjectionBuilder: Returns the combined projection direction1
License requirements: None.
direction1 - Variable in class nxopen.uf.UFMotion.CylindricalBushing
direction1 - Variable in class nxopen.uf.UFMotion.GeneralBushing
direction1 - Variable in class nxopen.uf.UFMotion.Joint
direction1Delta() - Method in interface nxopen.geometricutilities.PatternClocking: Deprecated.
Deprecated in NX8.0.0. This functionality is no longer supported.
direction1Delta() - Method in interface nxopen.geometricutilities.PatternClockingBuilder: Returns the x direction delta for linear clocking
License requirements: None.
direction2() - Method in interface nxopen.features.CombinedProjectionBuilder: Returns the combined projection direction2
License requirements: None.
direction2 - Variable in class nxopen.uf.UFMotion.CylindricalBushing
direction2 - Variable in class nxopen.uf.UFMotion.GeneralBushing
direction2 - Variable in class nxopen.uf.UFMotion.Joint
direction2Delta() - Method in interface nxopen.geometricutilities.PatternClocking: Deprecated.
Deprecated in NX8.0.0. This functionality is no longer supported.
direction2Delta() - Method in interface nxopen.geometricutilities.PatternClockingBuilder: Returns the y direction delta for linear clocking
License requirements: None.
DIRECTION_CLOCKWISE - Static variable in class nxopen.uf.UFPath.Direction
DIRECTION_COUNTER_CLW - Static variable in class nxopen.uf.UFPath.Direction
DIRECTION_LAST_ELEMENT - Static variable in class nxopen.uf.UFPath.Direction
DIRECTION_NONE - Static variable in class nxopen.uf.UFPath.Direction
DIRECTION_REVERSE - Static variable in class nxopen.motion.CurveContactBuilder.GeometryMaterialSide
DIRECTION_X - Static variable in class nxopen.geometricutilities.TransformerData.ObjectType
DIRECTION_Y - Static variable in class nxopen.geometricutilities.TransformerData.ObjectType
DIRECTION_Z - Static variable in class nxopen.geometricutilities.TransformerData.ObjectType
directional() - Method in interface nxopen.cam.CleanupSettings: Returns the Directional, Cleanup Geometry Settings
License requirements: None.
directionAsString() - Method in interface nxopen.blockstyler.OrientXpress: Returns the Direction as string
License requirements: None.
directionAtPoint() - Method in interface nxopen.geometricutilities.BridgeCurveConnectivity: Returns the direction at point
License requirements: None.
directionAxis() - Method in interface nxopen.weld.DatumCommonBuilder: Returns the direction axis.
directionAxisType() - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder: Returns the direction axis type
License requirements: None.
DirectionCollection - Interface in nxopen: Represents a collection of nxopen.Direction .
directionCsys() - Method in interface nxopen.cae.LaminateDrapingDataBuilder: Returns the draping direction coordinate system
License requirements: None.
directionData - Variable in class nxopen.uf.UFModl.RefitFaceData
DirectionDataComponent - Class in nxopen.cae.responsesimulation: Specifies the direction data components
directionFlag() - Method in interface nxopen.features.DivideCurveBuilder: Returns the input arc length direction flag
License requirements: None.
directionLength() - Method in interface nxopen.weld.DatumCommonBuilder: Returns the length of the datum axis vector created.
directionObject() - Method in interface nxopen.SketchMirrorPatternBuilder: Returns the direction object.
directionOption() - Method in interface nxopen.cae.LaminateDrapingDataBuilder: Returns the draping direction option
License requirements: None.
DirectionOption - Class in nxopen.die: Settings for the profile direction.
directionOption() - Method in interface nxopen.features.CircularBlendCurveBuilder: Returns the cylinder direction option as CircularBlendCurveBuilder.CylinderDirectionOption
License requirements: None.
directionOption() - Method in interface nxopen.features.EmbossJoggle: Returns the emboss joggle direction option
License requirements: None.
directionOption() - Method in interface nxopen.features.FitSurfaceBuilder: Returns the direction option
License requirements: None.
directionOption() - Method in interface nxopen.features.subdivision.SubdivisionExtrudeCageBuilder: Returns the direction option
License requirements: None.
directionOption() - Method in interface nxopen.geometricanalysis.CurveAnalysisCombsBuilder: Deprecated.
Deprecated in NX8.5.0. Use CurveCurvatureAnalysis .
directionOption() - Method in interface nxopen.geometricanalysis.CurveAnalysisInflectionsBuilder: Deprecated.
Deprecated in NX8.5.0. Use GeometricAnalysis.CurveCurvatureAnalysis .
directionOption() - Method in interface nxopen.geometricanalysis.CurveAnalysisPeaksBuilder: Deprecated.
Deprecated in NX8.5.0. Use GeometricAnalysis.CurveCurvatureAnalysis .
directionOption() - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord: Deprecated.
Deprecated in NX8.5.0. Use CurveAnalysisDisplay .
directionOption() - Method in interface nxopen.tooling.DieEngTrimAngleCheckBuilder: Returns the option to set the method of defining trimming direction
License requirements: None.
directionOrientation() - Method in interface nxopen.features.DatumAxisBuilder: Returns the direction orientation.
directionReverse() - Method in interface nxopen.tooling.EdgePatchBuilder: Reverse reference face direction.
directions() - Method in interface nxopen.BasePart: Returns the DirectionCollection instance belonging to this part .
directions - Variable in class nxopen.uf.UFModlGeneral.AskBoundingBoxAlignedData
directions - Variable in class nxopen.uf.UFModlGeneral.AskBoundingBoxExactData
DIRECTIONS_ARE_COPLANAR - Static variable in class nxopen.uf.UFConstants
DirectionsData() - Constructor for class nxopen.CoordinateSystem.DirectionsData
DirectionsData() - Constructor for class nxopen.drawings.FlatPatternObject.DirectionsData
directionStruct - Variable in class nxopen.uf.UFCurve.CombineCurvesDirection
DirectionStructU() - Constructor for class nxopen.uf.UFCurve.DirectionStructU
DirectionStructU(double[]) - Constructor for class nxopen.uf.UFCurve.DirectionStructU
directionTag - Variable in class nxopen.uf.UFModlFeatures.AskTaperFromEdges1Data
directionTag - Variable in class nxopen.uf.UFModlFeatures.AskTaperFromEdgesData
directionType() - Method in interface nxopen.cae.BeamSectionOrientationOptions: Returns the direction type
License requirements: None.
directionType() - Method in interface nxopen.cae.UserDefinedSolidBeamSectionBuilder: Returns the option to define reference vector
License requirements: None.
directionType() - Method in interface nxopen.cam.ProbeInspectPointMoveBuilder: Returns the probing direction
License requirements: None.
directionType() - Method in interface nxopen.cam.ProbeInspectSurfacePointMoveBuilder: Returns the direction type
License requirements: None.
directionType() - Method in interface nxopen.drawings.BrokenViewBuilder: Returns the direction type
License requirements: None.
directionType() - Method in interface nxopen.features.sheetmetal.JogBuilder: Returns
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
directionType() - Method in interface nxopen.features.shipdesign.PenetrationAssociationBuilder: Returns the direction
License requirements: None.
directionType() - Method in interface nxopen.features.shipdesign.PenetrationCutoutBuilder: Returns the direction type
License requirements: None.
directionType() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder: Returns the direction
License requirements: None.
directionType() - Method in interface nxopen.geometricutilities.HelixPattern: Returns the type of helix direction method
License requirements: None.
directionType() - Method in interface nxopen.geometricutilities.SpiralPattern: Returns the type of spiral direction method
License requirements: None.
directionType() - Method in interface nxopen.mechatronics.PositionControlBuilder: Returns the direction type, which works only when the position control is used to drive TransportSurface
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")

Created in NX10.0.0
directionType() - Method in interface nxopen.mechatronics.SpeedControlBuilder: Returns the direction type, which works only when the speed control is used to drive TransportSurface
License requirements: None.
directionType - Variable in class nxopen.uf.UFCurve.CombineCurvesDirection
directionVec - Variable in class nxopen.uf.UFBound.MemberData
directionVector() - Method in interface nxopen.drawings.BrokenViewBuilder: Returns the direction vector.
directionVector() - Method in interface nxopen.features.AOCSBuilder: Returns the offset diection vector
License requirements: solid_modeling ("SOLIDS MODELING")
.
directionVector1() - Method in interface nxopen.weld.FilletBuilder: Returns the face normal direction.
directionVector2() - Method in interface nxopen.weld.FilletBuilder: Returns the face normal direction for the second face.
directionView() - Method in interface nxopen.annotations.DimensionMeasurementBuilder: Returns the measurement direction view when using DimensionMeasurementBuilder.MeasurementMethod.POINT_TO_POINT (optional)
License requirements: None.
directOpenSimulation(String) - Method in interface nxopen.motion.MotionSession: Direct open the Simulation.
directOwner() - Method in interface nxopen.assemblies.Component: Returns the ComponentAssembly which owns this component as a "Top Level" component.
directToggle() - Method in interface nxopen.weld.FilletBuilder: Returns the toggle to change direction.
directTrimPoint() - Method in interface nxopen.cam.TurnEngageRetractBuilder: Returns the Direct engage to(retract from) trim point
License requirements: None.
DirectUnbendBuilder - Interface in nxopen.tooling: The builder contains all inputs for direct unbend.
DirectUnbendBuilder.Bendtypes - Class in nxopen.tooling: unbend operations.
directUnfold() - Method in interface nxopen.tooling.ToolingManager: Returns the DirectUnfold instance belonging to this part .
DirectUnfoldBuilder - Interface in nxopen.tooling: The builder contains all inputs for direct unfolding.
DirectUnfoldBuilder.Bend - Class in nxopen.tooling: The number of children bends in defining prebend.
DirectUnfoldBuilder.BodyList - Class in nxopen.tooling: The name list of bodies in current part.
DirectUnfoldBuilder.MatType - Class in nxopen.tooling: The material database defined in PDW.
DirectUnfoldBuilder.Types - Class in nxopen.tooling: Specifies the option of direct unfold type
DirectUnfoldCollection - Interface in nxopen.tooling: Creates a DirectUnfoldBuilder
To obtain an instance of this class, refer to ToolingManager

Created in NX6.0.0
dirList - Variable in class nxopen.uf.UFAssem.AskSearchDirectoriesData
dirMethod - Variable in class nxopen.uf.UFModl.SmslotData
dirOrEndPt - Variable in class nxopen.facet.FacetedEdge.CurveData
dirpath() - Method in interface nxopen.UFSession
dirPt1 - Variable in class nxopen.uf.UFCurve.Bcmmcp
dirPt2 - Variable in class nxopen.uf.UFCurve.Bcmmcp
DIRR_ON_CURVE_BINORMAL - Static variable in class nxopen.uf.UFSo.DirrOnCurveOption
DIRR_ON_CURVE_NORMAL - Static variable in class nxopen.uf.UFSo.DirrOnCurveOption
DIRR_ON_CURVE_TANGENT - Static variable in class nxopen.uf.UFSo.DirrOnCurveOption
dirRef - Variable in class nxopen.uf.UFModeling.AskLinkFacesData
DirrOnSurfData() - Constructor for class nxopen.uf.UFSo.DirrOnSurfData
DirrOnSurfData(Tag, Tag[], int, Tag, boolean) - Constructor for class nxopen.uf.UFSo.DirrOnSurfData
dirs - Variable in class nxopen.uf.UFDirpath.AskDirsData
dirX - Variable in class nxopen.uf.UFModeling.AskFeatDirectionData
dirY - Variable in class nxopen.uf.UFModeling.AskFeatDirectionData
DISABLE_SPECIFIC - Static variable in class nxopen.Selection.SelectionAction: Remove selected objects from selection
disableAbort() - Method in interface nxopen.uf.UFAbort: Refer to UF_ABORT_disable_abort for documentation.
DISABLED - Static variable in class nxopen.display.Shadows.RealTimeState: Realtime is disabled
DISABLED - Static variable in class nxopen.preferences.ObjectPreferences.Translucency
disabled() - Method in interface nxopen.validate.ResultObject: Returns the disabled status of check result.
disableLoadCondition(String) - Method in interface nxopen.cae.SimLoadRecipe: Disables a load condition in the Load Recipe.
disableMiscCbs() - Method in interface nxopen.uf.UFUndo: Refer to UF_UNDO_disable_misc_cbs for documentation.
disableQuickAccess() - Method in interface nxopen.uf.UFUi: Refer to UF_UI_disable_quick_access for documentation.
disableRaytracing - Variable in class nxopen.uf.UFDisp.ShadeOptions
disableTrackingValue(String) - Method in interface nxopen.cae.SimLoadRecipe: Disables a tracking value in the Load Recipe.
DISALLOW - Static variable in class nxopen.blockstyler.Tree.BeginLabelEditState: Use this option to disallow label edit.
disassocFromSolid(Tag) - Method in interface nxopen.uf.UFFacet: Refer to UF_FACET_disassoc_from_solid for documentation.
DISC - Static variable in class nxopen.uf.UFModl.BlendRadiusTypes
DISCARD - Static variable in class nxopen.features.sheetmetal.AeroFlangeBuilder.DirType: Discard Direction Type
DISCARD - Static variable in class nxopen.SketchAssociativeTrimBuilder.TrimOption: Selected region will be discarded.
DISCARD - Static variable in class nxopen.tooling.EnlargeSurfaceBuilder.KeepDiscardOption: selected region will be discarded.
DISCARD - Static variable in class nxopen.tooling.TrimRegionBuilder.RegionOption: selected region will be discarded.
discardChanges() - Method in interface nxopen.issue.IssueList: Discards the modified IssueContent s
License requirements: nx_issue_mgmt ("NX Issue Tracking")

Created in NX8.5.0
discardIssue() - Method in interface nxopen.issue.IssueContent: Discards the newly created issue which has not saved in external db yet
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.
discipline() - Method in interface nxopen.drafting.DrawingCreationWizardBuilder: Returns the discipline.
disconnect() - Method in interface nxopen.issue.IssueManager: Disconnects from issue server
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.
disconnectPort(Tag) - Method in interface nxopen.uf.UFRoute: Refer to UF_ROUTE_disconnect_port for documentation.
DISCONTINUITY - Static variable in class nxopen.routing.Corner.Type: Discontinuity corner.
DiscontinuityCorner - Interface in nxopen.routing: A discontinuity corner is a corner that forces Routing.Stock objects to split as they cover the segments attached to the discontinuity corner.
discontinuityCorner() - Method in interface nxopen.routing.RemoveDiscontinuityBuilder: Returns the selected RouteObjectCollector which contains discontinuity corner
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Created in NX7.5.0
DiscontinuityCornerCollection - Interface in nxopen.routing: Represents a collection of DiscontinuityCorner objects.
discontinuityCorners() - Method in interface nxopen.routing.RouteManager: DiscontinuityCorner collection .
DISCREPANCY - Static variable in class nxopen.routing.Run.CompareStatus: Items have characteristics discrepancies
discrepancyObjectType() - Method in interface nxopen.formboard.UpdateDiscrepancy: Returns the type of object referenced by the discrepancy.
discrepancyType() - Method in interface nxopen.formboard.UpdateDiscrepancy: Returns the general type of the discrepancy.
discriminator - Variable in class nxopen.pdm.PdmSession.TcserverSettingsData: the discriminator
disjointList - Variable in class nxopen.uf.UFModeling.CreateMultipleSewsData
disjointList - Variable in class nxopen.uf.UFModeling.CreateSewData
disjointRestart - Variable in class nxopen.cae.Post.StreamlineExtraction
DISK - Static variable in class nxopen.cam.InspectionMoveBuilder.ProbeTipTypes: Disk tip
DISK - Static variable in class nxopen.cam.InspectionProbeTrackingBuilder.TipTypes: Disk
DISK - Static variable in class nxopen.cam.InspectionSensorBuilder.SensorTipTypes: Disk
DISK_FACE_BLEND - Static variable in class nxopen.die.AddendumSectionBuilder.SurfaceBuildType: Create disc blend surface.
DISK_FACE_BLEND - Static variable in class nxopen.die.AddSurfBuilder.Methods: Disk type face blend.
dismissDialogArea2() - Method in interface nxopen.uf.UFUi: Refer to UF_UI_dismiss_dialog_area_2 for documentation.
disp() - Method in interface nxopen.UFSession
DISP2PT_ARC_MARKER - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
DISP2T_DC_SPOT_WELD - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
DISP2T_GENERAL_SPOT_WELD - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
DISP2T_IMPORTANT_SPOT_WELD - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
DISP2T_KPC_SPOT_WELD - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
DISP2T_PROC_SPOT_WELD - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
DISP2T_RES_SPOT_WELD - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
DISP2T_SEMIPANEL_SPOT_WELD - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
DISP2T_VITAL_SPOT_WELD - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
DISP3T_DC_SPOT_WELD - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
DISP3T_GENERAL_SPOT_WELD - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
DISP3T_IMPORTANT_SPOT_WELD - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
DISP3T_KPC_SPOT_WELD - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
DISP3T_PROC_SPOT_WELD - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
DISP3T_RES_SPOT_WELD - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
DISP3T_SEMIPANEL_SPOT_WELD - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
DISP3T_VITAL_SPOT_WELD - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
DISP4T_DC_SPOT_WELD - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
DISP4T_GENERAL_SPOT_WELD - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
DISP4T_IMPORTANT_SPOT_WELD - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
DISP4T_KPC_SPOT_WELD - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
DISP4T_PROC_SPOT_WELD - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
DISP4T_RES_SPOT_WELD - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
DISP4T_SEMIPANEL_SPOT_WELD - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
DISP4T_VITAL_SPOT_WELD - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
dispContact() - Method in interface nxopen.cam.DmBndBuilder: Returns the Display Contact
License requirements: None.
dispContactNormal() - Method in interface nxopen.cam.DmBndBuilder: Returns the Display Contact Normal
License requirements: None.
dispCS() - Method in interface nxopen.cae.AssignNodalCSBuilder: Returns the disp cs
License requirements: None.
dispCSType() - Method in interface nxopen.cae.AssignNodalCSBuilder: Returns the disp cstype
License requirements: None.
dispCsys() - Method in interface nxopen.cae.NodeModifyLabelBuilder: Returns the disp csys
License requirements: None.
displacement() - Method in interface nxopen.assemblies.PlaneSearchTermBuilder: Returns the displacement of the plane from the origin.
DISPLACEMENT - Static variable in class nxopen.bodydes.OnestepUnformBuilder.DisplaySpringbackMode: Onestep display springback mode is displacement
DISPLACEMENT - Static variable in class nxopen.cae.responsesimulation.EvaluationResultType
DISPLACEMENT - Static variable in class nxopen.cae.responsesimulation.SensorResultType
DISPLACEMENT - Static variable in class nxopen.cae.responsesimulation.TransmissibilityEvaluationSettingBuilder.MotionType
DISPLACEMENT - Static variable in class nxopen.cae.Result.Quantity
DISPLACEMENT - Static variable in class nxopen.cae.XyFunctionMeasure: Displacement unit
displacement - Variable in class nxopen.motion.ArticulationControl.ArticulationJointsDisplacementData: The articulation joint displacement value within current step
displacement() - Method in interface nxopen.motion.DriverOperation: Deprecated.
Deprecated in NX8.0.0. Obtain the expression using DriverOperation.displacementExpression() to query or edit it.
DISPLACEMENT - Static variable in class nxopen.motion.DriverOperation.IntegrationType: Displacement
DISPLACEMENT - Static variable in class nxopen.motion.GraphBuilder.RequestChoices: Displacement
DISPLACEMENT - Static variable in class nxopen.motion.MotionSensorBuilder.Types: displacement sensor type
displacement - Variable in class nxopen.uf.UFMotion.JointMotionInput
DISPLACEMENT_ABSOLUTE - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response: Absolute nodal displacement
DISPLACEMENT_CS - Static variable in class nxopen.cae.AssignNodalCSBuilder.Cs: displacement only
DISPLACEMENT_FT - Static variable in class nxopen.cae.XyFunctionUnit: Displacement unit: ft
DISPLACEMENT_IN - Static variable in class nxopen.cae.XyFunctionUnit: Displacement unit: in
DISPLACEMENT_LEVEL_CROSSING_RATE - Static variable in class nxopen.cae.Result.Quantity
DISPLACEMENT_M - Static variable in class nxopen.cae.XyFunctionUnit: Displacement unit: m
DISPLACEMENT_MAGNITUDE - Static variable in class nxopen.cae.Result.Quantity
DISPLACEMENT_MM - Static variable in class nxopen.cae.XyFunctionUnit: Displacement unit: mm
DISPLACEMENT_X - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response: Nodal displacement in X-direction
DISPLACEMENT_XABSOLUTE - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response: Absolute nodal displacement in X-direction
DISPLACEMENT_Y - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response: Nodal displacement in Y-direction
DISPLACEMENT_YABSOLUTE - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response: Absolute nodal displacement in Y-direction
DISPLACEMENT_Z - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response: Nodal displacement in Z-direction
DISPLACEMENT_ZABSOLUTE - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response: Absolute nodal displacement in Z-directionm
displacementExpression() - Method in interface nxopen.motion.DriverOperation: Returns the displacement expression
License requirements: None.
displacementStepSize() - Method in interface nxopen.cae.optimization.TBSShapeOptimizationParameters: Returns the step size option for modifying the displacement during the optimization operation
License requirements: None.
displacementunit - Variable in class nxopen.motion.ArticulationControl.ArticulationJointsDisplacementData: The articulation joint displacement unit
displaceMethod1 - Variable in class nxopen.uf.UFCurve.Bcmmcp
displaceMethod2 - Variable in class nxopen.uf.UFCurve.Bcmmcp
display() - Method in interface nxopen.drawings.ViewSectionLineBuilder: Returns the display
License requirements: None.
display() - Method in interface nxopen.PartCollection: Returns the current display part of the session.
DISPLAY - Static variable in class nxopen.sim.IsvControlPanelBuilder.SingleStepType: Display
DISPLAY - Static variable in class nxopen.tooling.QuickQuotationBuilder.ManageTemporaryObjectsTypes
DISPLAY - Static variable in class nxopen.uf.UFDisp.Context
display - Variable in class nxopen.uf.UFDisp.ShadeOptions
display(Tag, int, int, int) - Method in interface nxopen.uf.UFSo: Refer to UF_SO_display for documentation.
DISPLAY - Static variable in class nxopen.userdefinedobjects.UserDefinedEvent.Reason: Display UDO event
DISPLAY_AND_EMPHASIZE - Static variable in class nxopen.preferences.SessionDrafting.EdgeFaceDisplayType
DISPLAY_ARROW1 - Static variable in class nxopen.uf.UFDrf.ArrowDisplay
DISPLAY_ARROW2 - Static variable in class nxopen.uf.UFDrf.ArrowDisplay
DISPLAY_CONTINUATION_NOTE_ABOVE - Static variable in class nxopen.uf.UFTabnot.DisplayContinuationNote
DISPLAY_CONTINUATION_NOTE_BELOW - Static variable in class nxopen.uf.UFTabnot.DisplayContinuationNote
DISPLAY_CONTINUATION_NOTE_NONE - Static variable in class nxopen.uf.UFTabnot.DisplayContinuationNote
DISPLAY_EXT_LINE1 - Static variable in class nxopen.uf.UFDrf.ExtensionLineDisplay
DISPLAY_EXT_LINE2 - Static variable in class nxopen.uf.UFDrf.ExtensionLineDisplay
DISPLAY_FS_RGB - Static variable in class nxopen.uf.UFDisp.ShadeDisplay
DISPLAY_FS_RGB_PLUS_NOISE - Static variable in class nxopen.uf.UFDisp.ShadeDisplay
DISPLAY_GRAY_SCALE - Static variable in class nxopen.uf.UFDisp.ShadeDisplay
DISPLAY_IF_NOT_PASS - Static variable in class nxopen.validate.ValidatorOptions.ResultsDisplayModeTypes: Display results if the checking is not passed.
DISPLAY_IN_COLUMN - Static variable in class nxopen.annotations.HoleTableSettingsFormatBuilder.SizeFormatType: Display in Column
DISPLAY_IN_SUMMARY_ROWS - Static variable in class nxopen.annotations.HoleTableSettingsFormatBuilder.SizeFormatType: Display in Summary Rows
DISPLAY_MOM_EVENT - Static variable in class nxopen.sim.SimDebugBuilder.UiType: Display Mom Event
DISPLAY_MONOCHROME - Static variable in class nxopen.uf.UFDisp.ShadeDisplay
DISPLAY_NEAREST_RGB - Static variable in class nxopen.uf.UFDisp.ShadeDisplay
DISPLAY_NO_ARROWS - Static variable in class nxopen.uf.UFDrf.ArrowDisplay
DISPLAY_NO_EXT_LINE - Static variable in class nxopen.uf.UFDrf.ExtensionLineDisplay
DISPLAY_ONLY - Static variable in class nxopen.BasePart.BookmarkOption: Write only display attributes
DISPLAY_ORDERED_DITHER - Static variable in class nxopen.uf.UFDisp.ShadeDisplay
DISPLAY_PART - Static variable in class nxopen.Catiav5Creator.ExportFromOption: export data from displayed part
DISPLAY_PART - Static variable in class nxopen.DxfdwgCreator.ExportFromOption: export data from displayed part
DISPLAY_PART - Static variable in class nxopen.IgesCreator.ExportFromOption: export data from displayed part
DISPLAY_PART - Static variable in class nxopen.NXTo2dCreator.ExportFromOption: export data from displayed part
DISPLAY_PART - Static variable in class nxopen.Step203Creator.ExportFromOption: export data from displayed part
DISPLAY_PART - Static variable in class nxopen.Step214Creator.ExportFromOption: export data from displayed part
DISPLAY_RGB_PLUS_NOISE - Static variable in class nxopen.uf.UFDisp.ShadeDisplay
DISPLAY_SXLINE - Static variable in class nxopen.uf.UFDraw.SxlineDisplay
DISPLAY_TC_PLUS_NOISE - Static variable in class nxopen.uf.UFDisp.ShadeDisplay
DISPLAY_TWO_ARROWS - Static variable in class nxopen.uf.UFDrf.ArrowDisplay
DISPLAY_TWO_EXT_LINES - Static variable in class nxopen.uf.UFDrf.ExtensionLineDisplay
DisplayableObject - Interface in nxopen: Base class for all objects that are displayable.
DisplayableObject.ObjectFont - Class in nxopen: specifies the object font for objects such as lines .
DisplayableObject.ObjectWidth - Class in nxopen: specifies object width for objects such as lines and text .
displayAbsoluteRotationScreenSizeStandardText(int, String, Point3d, UserDefinedObjectDisplayContext.StandardTextRef, String, UserDefinedObjectDisplayContext.TextSize) - Method in interface nxopen.userdefinedobjects.UserDefinedObjectDisplayContext: Displays a single line "Standard Text" string using "Absolute Rotation and Screen Size Geometry" for a UserDefinedObject .
displayAbsoluteStandardText(int, String, Point3d, UserDefinedObjectDisplayContext.StandardTextRef, String, double, double) - Method in interface nxopen.userdefinedobjects.UserDefinedObjectDisplayContext: Displays a single line "Standard Text" string using "Absolute Geometry" for a UserDefinedObject .
displayAlertsOnInformation() - Method in interface nxopen.preferences.SessionUserInterfaceUI: Returns the option "Display Alerts on Information" gives choice, whether the user wants the Diagnostic alerts appear when features contain information messages during feature creation, edit, and update.
displayAlertsOnWarnings() - Method in interface nxopen.preferences.SessionUserInterfaceUI: Returns the option "Display Alerts on Warnings" gives choice, whether the user wants the Diagnostic alerts appear when features contain warnings during feature creation, edit, and update.
displayAllTextInUpperCase() - Method in interface nxopen.annotations.HoleTableSettingsFormatBuilder: Returns the display all text in upper case
License requirements: None.
DISPLAYAND_EMPHASIZE - Static variable in class nxopen.drawings.ViewWorkflowBuilder.Display
displayAngle(NXObject, Point3d, NXObject, Point3d) - Method in interface nxopen.Measurement: Calculates and displays 'Angle' between objects.
displayAppearance() - Method in interface nxopen.preferences.ViewVisualizationVisual: Returns the rendering style and the edge display options of the view.
DisplayAppearanceOptions() - Constructor for class nxopen.preferences.ViewVisualizationVisual.DisplayAppearanceOptions
DisplayAppearanceOptions(ViewVisualizationVisual.RenderingStyle, ViewVisualizationVisual.HiddenEdges, boolean, boolean, int, ViewVisualizationVisual.SmoothEdgeFont, ViewVisualizationVisual.SmoothEdgeWidth, double) - Constructor for class nxopen.preferences.ViewVisualizationVisual.DisplayAppearanceOptions: Constructor for the DisplayAppearanceOptions object.
displayArc(Point3d, Matrix3x3, double, double, double) - Method in interface nxopen.userdefinedobjects.UserDefinedObjectDisplayContext: Displays an arc for a UserDefinedObject .
displayArcLength(DisplayableObject[]) - Method in interface nxopen.Measurement: Calculates and displays 'Total Arc Length' of all the selected objects.
displayArcLengthBetweenPoints(Point, Point) - Method in interface nxopen.Measurement: Calculates and displays the arc length between two points on curves.
displayArrowOnParentView() - Method in interface nxopen.drawings.ViewProjectedViewSettingsBuilder: Returns the display arrow on parent view
License requirements: None.
displayAsPmi() - Method in interface nxopen.features.EditDimensionBuilder: Returns the display as pmi flag
License requirements: None.
displayAsSingleSided() - Method in interface nxopen.annotations.SingleSidedDisplayBuilder: Returns the display as single sided
License requirements: None.
displayBanner() - Method in interface nxopen.PlotBuilder: Returns the display banner.
displayBeamResultInLocalCsys - Variable in class nxopen.cae.Result.ResultParameters: Deprecated.
displayBitmapLabel() - Method in interface nxopen.blockstyler.Label: Returns the DisplayBitmapLabel
License requirements: None.
displayBorders() - Method in interface nxopen.drawings.ViewWorkflowBuilder: Returns the display view borders on the the drawing
License requirements: None.
displayBorders() - Method in interface nxopen.preferences.PartDrafting: Returns the flag indicating whether to display borders around drafting views, when selected
License requirements: None.
displayByTime() - Method in interface nxopen.cam.SimulationOptionsBuilder: Returns the display by time
License requirements: None.
displayCallback(UserDefinedDisplayEvent) - Method in interface nxopen.userdefinedobjects.UserDefinedClass.DisplayCallback: Prototype for display, selection, attention point, fit and screen-size-fit callbacks
License requirements: None.
displayCamObjectsDetails(NXObject[]) - Method in interface nxopen.Information: Display details of cam objects
License requirements: None.
displayCenterOfRotation() - Method in interface nxopen.preferences.SessionVisualizationScreen: Returns whether a graphic representing the center of rotation is displayed during interactive view rotation.
displayCgOption() - Method in interface nxopen.cae.SolidPropertyCheckBuilder: Returns the output mass split option option
License requirements: None.
DisplayChanger - Interface in nxopen.mechatronics: Represents the Display Changer which is used to change the display properties (Color, Translucency, and Visibility) of rigid body during simulation.
displayChanger() - Method in interface nxopen.mechatronics.PhysicsManager: Returns the DisplayChangerCollection belonging to this part
Created in NX10.0.0
DisplayChangerBuilder - Interface in nxopen.mechatronics: Represents a DisplayChanger builder.
DisplayChangerBuilder.ExecuteModes - Class in nxopen.mechatronics: the execute modes.
DisplayChangerCollection - Interface in nxopen.mechatronics: Represents a collection of Object Transformer.
displayChangeSymbol() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder: Returns the display change symbol
License requirements: None.
displayCircle(Point3d, Matrix3x3, double, boolean) - Method in interface nxopen.userdefinedobjects.UserDefinedObjectDisplayContext: Displays a circle for a UserDefinedObject .
displayComponent() - Method in interface nxopen.positioning.Network: Returns the Assemblies.Component in which the display is changed by solving the network.
displayComponentsExact(Component[]) - Method in interface nxopen.assemblies.Component: Sets an array of components to display using the exact representation.
displayComponentsLightweight(Component[]) - Method in interface nxopen.assemblies.Component: Sets an array of components to display using the lightweight representation.
displayConstraints() - Method in interface nxopen.assemblies.PositioningTask: Returns the flag indicating whether constraints of work collection design elements of this positioning task are to be displayed on the graphics window or not.
displayConstraints() - Method in interface nxopen.positioning.ComponentPositioner: Returns the flag indicating whether constraints in the part of this positioner are to be displayed on the graphics window or not.
displayConstraintSymbols() - Method in interface nxopen.preferences.SessionSketch: Returns the display constraint symbols preference
License requirements: None.
displayConstructionGeometry() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder: Returns the setting to indicate if the construction geometry should be created, true they will be created, false they will not be created.
displayContext(String) - Method in interface nxopen.uf.UFHelp: Refer to UF_HELP_display_context for documentation.
displayContext() - Method in interface nxopen.userdefinedobjects.UserDefinedDisplayEvent: Returns the display context.
displayContinuationNote() - Method in interface nxopen.annotations.TableSectionStyleBuilder: Returns the display continuation note type
License requirements: None.
displayContinuationNote - Variable in class nxopen.uf.UFTabnot.SectionPrefs
displayContouring() - Method in interface nxopen.cae.xyplot.BaseGridLayoutStyleSetting: Returns a value indicating whether to display contouring
License requirements: None.
displayCoordinateSystem - Variable in class nxopen.cae.SetManager.TargetSetMembersData: display coordinate system
displayCrosshatch() - Method in interface nxopen.annotations.LightweightSectionBuilder: Returns the display crosshatch option
License requirements: None.
displayCrosshatch() - Method in interface nxopen.annotations.RegionBuilder: Returns the display crosshatch toggle
License requirements: None.
displayCurrentContext() - Method in interface nxopen.uf.UFHelp: Refer to UF_HELP_display_current_context for documentation.
displayCurveCurvatureOutside() - Method in interface nxopen.preferences.PartModeling: Returns the curve curvature display style to show it on the inside/outside of the curve
License requirements: None.
displayCutRegionsFlag() - Method in interface nxopen.cam.OperationDisplayOptionsBuilder: Returns the display cut regions flag
License requirements: None.
displayCuttingPlaneSymbol() - Method in interface nxopen.annotations.CuttingPlaneSymbolBuilder: Returns the display cutting plane symbol
License requirements: None.
displayDeletedGridPoints() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder: Returns the setting to indicate if the deleted grid points should be displayed, true they will be displayed, false they will not be displayed.
displayDeviationChecking(ICurve, ICurve, int, double, double, Measurement.DeviationReportType) - Method in interface nxopen.Measurement: Checks deviations between curves (curve to curve),and displays the report.
displayDeviationChecking(Curve, Face, int, double, double, Measurement.DeviationReportType) - Method in interface nxopen.Measurement: Checks deviations between a curve and a face (curve to face), and displays the report.
displayDeviationChecking(Face, Edge, Face, int, double, double, Measurement.DeviationReportType) - Method in interface nxopen.Measurement: Checks deviations between a edge and a face (edge to face), and displays the report.
displayDeviationChecking(Face, Face, int, int, double, double, Measurement.DeviationReportType) - Method in interface nxopen.Measurement: Checks deviations between faces (face to face), and displays the report.
displayDeviationChecking(Face, Edge, Face, Edge, int, double, double, Measurement.DeviationReportType) - Method in interface nxopen.Measurement: Checks deviations between edges (edge to edge), and displays the report.
displayDialogsInPlayback() - Method in interface nxopen.preferences.SessionUserInterfaceUI: Returns the display dialogs in playback flag
License requirements: None.
displayDieData() - Method in interface nxopen.die.Tip: Makes the product data in die position visible.
displayDimensionLine() - Method in interface nxopen.annotations.OrdinateStyleBuilder: Returns the display dimension line preference for an ordinate set
License requirements: None.
displayDOFArrows() - Method in interface nxopen.preferences.SessionSketch: Returns the displays DOF arrows flag.
displayDynamicColorPlots() - Method in interface nxopen.tooling.FlowDisplayBuilder: Display color plots in all steps.
DISPLAYED - Static variable in class nxopen.cae.Post.Threshold
DisplayedConstraint - Interface in nxopen.positioning: The displayed representation of a constraint, used for graphical display and to represent it in the Assembly Navigator.
DisplayedConstraintCollection - Interface in nxopen.positioning: a collection of displayed constraints
To obtain an instance of this class, refer to Part

Created in NX7.5.0
displayedConstraints() - Method in interface nxopen.Part: Returns the DisplayedConstraintCollection belonging to this part .
displayEffectivityFilterNodesInPartNavigator() - Method in interface nxopen.annotations.PmiPreferences: Returns the flag indicating the display of Effectivity Filtered PMI node in Part Navigator
License requirements: None.
displayExcludedDesignElements() - Method in interface nxopen.assemblies.Subset: Returns the design elements excluded from spatial search to be displayed or not
License requirements: nx_4gd_integration ("4th Generation Design")
.
displayFacets(int, int, Point3d[], Vector3d[], UserDefinedObjectDisplayContext.FacetType) - Method in interface nxopen.userdefinedobjects.UserDefinedObjectDisplayContext: Displays a series of facets for a UserDefinedObject .
displayFeatureDetails(nxopen.features.Feature, Information.DisplayFeatureType) - Method in interface nxopen.Information: Displays relevant information about features created while generating a 3-D model in the ListingWindow .
displayFitParentheses() - Method in interface nxopen.annotations.DimensionPreferences: Returns the flag indicating whether to display parentheses for fit tolerance.
displayFitSeparator() - Method in interface nxopen.annotations.DimensionPreferences: Returns the flag indicating whether to display separator for fit tolerance of assembly dimensions.
displayFlag - Variable in class nxopen.uf.UFCurve.AskSplineSapData
displayFormability() - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder: Display formability analysis result.
displayGouges() - Method in interface nxopen.cam.CutDepthChecker: Returns the indicator to display gouges
License requirements: None.
DisplayGridData() - Constructor for class nxopen.cae.SimBCDisplay.DisplayGridData
displayHoles() - Method in interface nxopen.die.DrawDiePunchBuilder: Returns the display holes switch of the draw die punch casting, if true holes will be created in the punch, if false holes will not be created.
displayHoles() - Method in interface nxopen.die.HoleChildBuilder: Returns the display holes switch of the die hole, if true the hole will be built into the model, if false it will not.
displayHoles() - Method in interface nxopen.die.HoleParentBuilder: Returns the display holes switch of die holes, if true the holes will be built into the model, if false they will not.
displayHoles() - Method in interface nxopen.die.PierceHoleChildBuilder: Returns the display holes option of the pierce hole
License requirements: ug_die_design ("Die Design")
.
displayHoles() - Method in interface nxopen.die.PierceHoleParentBuilder: Returns the display holes option of pierce holes
License requirements: ug_die_design ("Die Design")
.
displayHoles() - Method in interface nxopen.die.RotorBuilder: Returns the display holes of the rotor casting.
displayHoles() - Method in interface nxopen.die.SteelInsertBuilder: Returns the display holes of the diesteelinsert
License requirements: ug_die_design ("Die Design")
.
displayId() - Method in interface nxopen.drawings.GeneralViewStyle: Returns the display identifier option for a member view.
displayId() - Method in interface nxopen.drawings.ViewStyleGeneralBuilder: Returns the display identifier option on the GENERAL tab of the View Style Dialog, it controls whether the orientation or the name of the view is displayed in the graphic window
License requirements: None.
displayId() - Method in interface nxopen.preferences.GeneralViewPreferences: Returns the display identifier option for a member view.
displayInfo - Variable in class nxopen.uf.UFStd.StlParams
displayInformation() - Method in interface nxopen.assemblies.ComponentPattern: Displays the information of the component pattern.
displayInformation() - Method in interface nxopen.STLImporter: Returns the Display Information flag.
displayInterferenceResult() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder: Returns the setting to indicate if the interference curves should be created, true they will be created, false they will not be created.
displayInternalEdges() - Method in interface nxopen.cae.MeshCollectorDisplayDefaults3d: Returns the display 3d element internal edges visibility setting.
displayInternalEdges() - Method in interface nxopen.cae.MeshDisplaySettings3d: Returns the display 3d element internal edges visibility setting.
displayInterpartChildren(Part) - Method in interface nxopen.Information: Displays names of interpart children(part files having interlinked geometry) in the ListingWindow .
displayInterpartParents(Part) - Method in interface nxopen.Information: Displays names of interpart parents(part files having interlinked geometry) in the ListingWindow .
displayIntersectionCurves() - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder: Returns the display of the intersection curves.
displayJisrotationLetter() - Method in interface nxopen.drawings.SectionLineStyleBuilder: Deprecated.
Deprecated in NX10.0.0. Use ViewSectionLineBuilder.displayRotationLetter() instead.
displayLabel() - Method in interface nxopen.drawings.SectionLineStyleBuilder: Deprecated.
Deprecated in NX10.0.0. Use ViewSectionLineBuilder.display() instead.
displayLabel() - Method in interface nxopen.drawings.ViewProjectedArrowSettingsBuilder: Returns the display label
License requirements: None.
displayLeadingDimensionZeros() - Method in interface nxopen.annotations.UnitsStyleBuilder: Returns the display leading dimension zeros setting for linear dimensions and fractional angular dimensions
License requirements: None.
displayLeadingToleranceZeros() - Method in interface nxopen.annotations.UnitsStyleBuilder: Returns the display leading tolerance zeros setting for linear dimensions and fractional angular dimensions
License requirements: None.
displayLegacyFeatureName() - Method in interface nxopen.preferences.SessionModeling: Returns the toggle "Display Legacy Feature names" gives choice, how user wants feature name in "Name" Coulmn in Partnav checked toggled(True) will show old feature names in "Name" column in Partnav, while unchecked toggled(False) will show new translatable feature names in "Name" column in Partnav
License requirements: None.
displayLettersOnBends() - Method in interface nxopen.drawings.ViewSectionLineBuilder: Returns the display letters on bends
License requirements: None.
displayLineBetweenArrows() - Method in interface nxopen.annotations.DimensionPreferences: Returns the flag indicating whether to display line between arrows
License requirements: None.
displayLinkedPart() - Method in interface nxopen.features.PartModule: Opens linked part module part
License requirements: usr_defined_features ("USER DEFINED FEATURES")
.
displayMagnitudeProperty() - Method in interface nxopen.cae.SimBCDisplay: Returns the neutral name of the property that will control the display
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
displayMainPart() - Method in interface nxopen.features.PartModule: Opens owning part module part
License requirements: solid_modeling ("SOLIDS MODELING")
.
DisplayManager - Interface in nxopen: Manages the display and changes to it
To obtain an instance of this class, refer to Session

Created in NX3.0.0
displayManager() - Method in interface nxopen.Session: Returns the nxopen.displayManager belonging to this session
Created in NX3.0.0
DisplayManager.FacetCacheMemoryLevelType - Class in nxopen: Facet cache memory level.
DisplayManager.J3dColor - Class in nxopen: 3d interface color definition
DisplayManager.J3dData - Class in nxopen: 3d interface structure
DisplayManager.J3dGeometryData - Class in nxopen: This class holds the data returned from DisplayManager.getJ3dGeometry(nxopen.DisplayableObject, double, boolean)
DisplayManager.J3dMaterial - Class in nxopen: 3d interface material definition
DisplayManager.LayerSetting - Class in nxopen: Represents the layer settings when the objects to show are in invisible layers
DisplayManager.ShowHideScope - Class in nxopen: Controls the scope for the show hide operation.
DisplayManager.ShowHideType - Class in nxopen: Controls the type of object to show or hide.
displayMenu(String, int, String[], int) - Method in interface nxopen.uf.UFUi: Refer to UF_UI_display_menu for documentation.
displayMesh(Tag) - Method in interface nxopen.uf.UFSf: Refer to UF_SF_display_mesh for documentation.
displayMessage(String, int) - Method in interface nxopen.uf.UFUi: Refer to UF_UI_display_message for documentation.
displayMethod() - Method in interface nxopen.geometricanalysis.HighlightLinesAnalysisBuilder: Deprecated.
Deprecated in NX8.0.0. Use HighlightLinesAnalysisBuilder.type2() and HighlightLinesAnalysisBuilder.setType2(nxopen.geometricanalysis.HighlightLinesAnalysisBuilder.Types2) instead.
displayMidnodeValue(boolean) - Method in interface nxopen.cae.ResultParameters: This is display only command.
displayMinimumDistance(DisplayableObject, DisplayableObject) - Method in interface nxopen.Measurement: Calculates and displays 'Minimum Distance " between objects.
displayMinimumDistance(NXObject, Point3d, NXObject, Point3d) - Method in interface nxopen.Measurement: Calculates and displays 'Minimum Distance' between objects.
displayMinimumDistance(NXObject, Point3d, NXObject) - Method in interface nxopen.Measurement: Calculates and displays 'Minimum Distance' between objects.
displayMinimumDistance(NXObject, NXObject, Point3d) - Method in interface nxopen.Measurement: Calculates and displays 'Minimum Distance' between objects.
DisplayMinimumDistanceData() - Constructor for class nxopen.Measurement.DisplayMinimumDistanceData
displayMode() - Method in interface nxopen.cae.SimBCDisplay: Returns the BC display mode
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
displayMode() - Method in interface nxopen.preferences.SubdivisionModelingPreferences: Returns the mesh and solid body display option
License requirements: None.
displayMode - Variable in class nxopen.preferences.ViewVisualizationVisual.TrueSurfaceDisplayPref: Deprecated.

Display Mode
displayMode - Variable in class nxopen.uf.UFView.Visualization
DisplayModification - Interface in nxopen: Represents changes to the display characteristics of an object .
DisplayModification.NewGridData - Class in nxopen: This class holds the data returned from DisplayModification.getNewGrid()
displayMultiLineAbsoluteRotationScreenSizeStandardText(int, String, Point3d, UserDefinedObjectDisplayContext.StandardTextRef, String[], UserDefinedObjectDisplayContext.TextSize) - Method in interface nxopen.userdefinedobjects.UserDefinedObjectDisplayContext: Displays a multi-line "Standard Text" string using "Absolute Rotation and Screen Size Geometry" for a UserDefinedObject .
displayMultiLineAbsoluteStandardText(int, String, Point3d, UserDefinedObjectDisplayContext.StandardTextRef, String[], double, double) - Method in interface nxopen.userdefinedobjects.UserDefinedObjectDisplayContext: Displays a multi-line "Standard Text" string using "Absolute Geometry" for a UserDefinedObject .
displayMultiLineScreenStandardText(int, String, Point3d, UserDefinedObjectDisplayContext.StandardTextRef, String[], UserDefinedObjectDisplayContext.TextSize) - Method in interface nxopen.userdefinedobjects.UserDefinedObjectDisplayContext: Displays a multi-line "Standard Text" string using "Screen Geometry" for a UserDefinedObject .
displayMultiSelectMenu(String, int, String[], int) - Method in interface nxopen.uf.UFUi: Refer to UF_UI_display_multi_select_menu for documentation.
displayName() - Method in interface nxopen.assemblies.Component: Returns the displayable name of the prototype part.
displayName() - Method in interface nxopen.cae.responsesimulation.RSDisplayObject: Returns the true/false flag based on whether the name of the BC is displayed in the graphics window
License requirements: nx_response_anlys ("NX Response Analysis")
.
displayName() - Method in interface nxopen.cam.CAMAttribute: Returns the name of the attribute
License requirements: None.
displayName() - Method in interface nxopen.pdm.AttributeGroupDescription: Returns the display name for the attribute group description.
displayNameStyle() - Method in interface nxopen.annotations.OrdinateStyleBuilder: Returns the name display style for an ordinate set
License requirements: None.
displayNonmodalMsg(String, String, int) - Method in interface nxopen.uf.UFUi: Refer to UF_UI_display_nonmodal_msg for documentation.
displayNormals() - Method in interface nxopen.cae.modelcheck.AlignShellElementNormalBuilder: Display element normals for connected elements, which are to be aligned with seed element normal
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
displayNormals() - Method in interface nxopen.cae.modelcheck.ReverseShellElementNormalBuilder: Display normals of ReverseShellElementNormalBuilder.selectionList()
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Created in NX8.5.0
displayNumericalValueWithArrow - Variable in class nxopen.cae.Post.Mark
displayObjectColor() - Method in interface nxopen.preferences.SessionSketch: Returns the display object color
License requirements: None.
displayObjectColor() - Method in interface nxopen.preferences.SketchPreferences: Returns the toggle that controls whether objects are displayed in their actual color in sketch
License requirements: None.
displayObjectName() - Method in interface nxopen.preferences.SessionSketch: Returns the display object name
License requirements: None.
displayObjectName() - Method in interface nxopen.preferences.SketchPreferences: Returns the toggle that controls whether objects are displayed with their names in sketch
License requirements: None.
displayObjects - Variable in class nxopen.drawings.ViewBreak.ViewBreakDisplayableObjectsAndOffsetsData
displayObjectsDetails(NXObject[]) - Method in interface nxopen.Information: Displays information about geometric objects in the ListingWindow .
displayObjectsOnEntry() - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder: Display the parting surfaces, guide lines, and parting lines when entering the Design Parting Surface command.
displayOgpArc(Tag, double[], double, double, double[], double) - Method in interface nxopen.uf.UFDisp: Refer to UF_DISP_display_ogp_arc for documentation.
displayOgpCircle(Tag, double[], double[], double) - Method in interface nxopen.uf.UFDisp: Refer to UF_DISP_display_ogp_circle for documentation.
displayOgpLine(Tag, double[], double[]) - Method in interface nxopen.uf.UFDisp: Refer to UF_DISP_display_ogp_line for documentation.
displayOgpPolyline(Tag, double[][], int) - Method in interface nxopen.uf.UFDisp: Refer to UF_DISP_display_ogp_polyline for documentation.
displayOnSegments() - Method in interface nxopen.routing.BranchPathNumberingBuilder: Returns the toggle specified in the UI on whether to display the labels
License requirements: routing_hvac ("Routing HVAC")
.
displayOption() - Method in interface nxopen.features.shipdesign.DisplaySolidBuilder: Returns the setting for how the basic design objects are displayed.
DisplayPaint - Interface in nxopen.cam: Represents a display paint Builder
This is an abstract class and cannot be instantiated.
displayParents(Tag, int, int, int) - Method in interface nxopen.uf.UFSo: Refer to UF_SO_display_parents for documentation.
displayPartBodyName() - Method in interface nxopen.annotations.HoleTableSettingsFormatBuilder: Returns the display part and body name
License requirements: None.
displayPartHistory(BasePart) - Method in interface nxopen.Information: Displays the ListingWindow with a part's save history.
displayPartImport() - Method in interface nxopen.tooling.BlankGeneratorBuilder: Returns the display part needed while importing blank.
displayPartSelect() - Method in interface nxopen.tooling.BlankGeneratorBuilder: Returns the display part needed while selecting a blank .
DisplayPath - Interface in nxopen.cam: Represents a display path Builder
This is an abstract class and cannot be instantiated.
DisplayPath.PathDisplayTypes - Class in nxopen.cam: the path display types .
displayPmiAssociatedComponentsLoadedForReference() - Method in interface nxopen.annotations.PmiPreferences: Returns the flag indicating PMI associated objects components loaded for reference
License requirements: None.
DisplayPmiEffectivityMethod - Class in nxopen.annotations: Specifies the options for display PMI Effectivity
displayPmiEffectivityMethod() - Method in interface nxopen.annotations.PmiPreferences: Returns the value indicating precise option of PMI Effectivity for prime geometry
License requirements: None.
displayPmiEffectivityReferenceMethod() - Method in interface nxopen.annotations.PmiPreferences: Returns the value indicating precise option of PMI Effectivity for reference geometry
License requirements: None.
displayPmiQueryDialogFromMb3() - Method in interface nxopen.annotations.PmiPreferences: Returns the PMI query dialog visibility from mb3 option
License requirements: None.
displayPointDetails(Point) - Method in interface nxopen.Information: Obtains the absolute and work coordinates of an explicit or implicit point and displays information in the ListingWindow device.
displayPointDetails(Point3d) - Method in interface nxopen.Information: Displays the absolute and work coordinates of a point in the ListingWindow device.
displayPoints(Point3d[], UserDefinedObjectDisplayContext.PolyMarker) - Method in interface nxopen.userdefinedobjects.UserDefinedObjectDisplayContext: Displays a series of points for a UserDefinedObject .
displayPolygon(Point3d[], boolean) - Method in interface nxopen.userdefinedobjects.UserDefinedObjectDisplayContext: Displays a polygon (a closed set of line segements) for a UserDefinedObject .
displayPolyline(Point3d[]) - Method in interface nxopen.userdefinedobjects.UserDefinedObjectDisplayContext: Displays a polyline (a connected set of line segements) for a UserDefinedObject .
displayProdIntObjectsDetails(NXObject[], int) - Method in interface nxopen.Information: Display details of product interface objects
License requirements: None.
displayProductBody() - Method in interface nxopen.tooling.MWDefineRegionsBuilder: Display the product body in the part file
License requirements: None.
displayProductBody() - Method in interface nxopen.tooling.MWSearchRegionBuilder: Display the product body in the part file
License requirements: None.
displayProfile(boolean) - Method in interface nxopen.bodydes.OnestepUnformBuilder: Displays profile result.
DisplayPropertiesBuilder - Interface in nxopen.fields: Represents a builder class for editing display properties of a Field
Used to edit a Field display properties.
DisplayPropertiesBuilder.DepDispTypeEnum - Class in nxopen.fields: Field Dep Disp Type
DisplayPropertiesBuilder.DepDomColorEnum - Class in nxopen.fields: Field Dep Dom Color
DisplayPropertiesBuilder.DepLabelValueEnum - Class in nxopen.fields: Field Dep Label Value
DisplayPropertiesBuilder.DispResolutionEnum - Class in nxopen.fields: Field Disp Resolution
DisplayPropertiesBuilder.IndepDomDispType - Class in nxopen.fields: Field Indep Dom Disp
DisplayPropertiesBuilder.LineFontEnum - Class in nxopen.fields: Field Line Display Fonts
DisplayPropertiesBuilder.LineWidthEnum - Class in nxopen.fields: Field Line Widths
DisplayPropertiesBuilder.TblPointTypeEnum - Class in nxopen.fields: Field Tbl Point Type
DisplayPropertiesBuilder.ValuesEnum - Class in nxopen.fields: Field Values
displayRegion() - Method in interface nxopen.drafting.AutomationPreferencesBuilder: Returns the display in non template
License requirements: None.
displayRegionLabel() - Method in interface nxopen.drafting.AutomationPreferencesBuilder: Returns the display region label
License requirements: None.
displayRegionLabel() - Method in interface nxopen.drawings.AutomationTemplateRegionBuilder: Returns the flag to indicate if the display region label should be displayed
License requirements: None.
displayRegionOrSheetBody(int) - Method in interface nxopen.tooling.MWDefineSheetsBuilder: Turn on or off the display for the region or sheet body for the selected regions
License requirements: None.
displayResolution() - Method in interface nxopen.fields.DisplayPropertiesBuilder: Returns the display resolution
License requirements: None.
DisplayResolutionBuilder - Interface in nxopen.geometricutilities: Represents a DisplayResolutionBuilder .
displayResourceBarOption() - Method in interface nxopen.preferences.SessionUserInterfaceUI: Returns the display resource bar option
License requirements: None.
displayResultsAsInfo() - Method in interface nxopen.geometricanalysis.ExamineGeometry: Displays the results in the information window
License requirements: None.
displayRotatedItems() - Method in interface nxopen.die.FlangeTaskBuilder: Returns the display rotated items setting of the flange task.
displayRotationLetter() - Method in interface nxopen.drawings.ViewSectionLineBuilder: Returns the display rotation letter
License requirements: None.
displayRoutingPathLength(ISegment[]) - Method in interface nxopen.Measurement: Calculates and displays the Routing path length.
displayRpoDimensions(Tag, int, Tag[], int, int, int) - Method in interface nxopen.uf.UFDisp: Refer to UF_DISP_display_rpo_dimensions for documentation.
displayScale() - Method in interface nxopen.features.WaveDatumBuilder: Returns the display scale
License requirements: None.
displayScale() - Method in interface nxopen.motion.CurveContactBuilder: Returns the display scale
License requirements: None.
displayScale() - Method in interface nxopen.motion.JointDefine: Returns the display scale
License requirements: mechanisms ("MECHANISMS")
.
displayScale() - Method in interface nxopen.motion.MarkerBuilder: Returns the display scale
License requirements: None.
displayScale() - Method in interface nxopen.motion.MotionBuilder: Returns the icon display scale
License requirements: mechanisms ("MECHANISMS")
.
displayScale() - Method in interface nxopen.motion.MotionObject: Returns the display scale factor
License requirements: mechanisms ("MECHANISMS")
.
displayScale() - Method in interface nxopen.motion.VObject: Returns the display scale
License requirements: None.
displayScale - Variable in class nxopen.uf.UFMotion.PointOnSurfaceData
displayScaleFactor() - Method in interface nxopen.features.DatumCsysBuilder: Returns the scale factor of the input Datum Csys
License requirements: None.
displayScreenStandardText(int, String, Point3d, UserDefinedObjectDisplayContext.StandardTextRef, String, UserDefinedObjectDisplayContext.TextSize) - Method in interface nxopen.userdefinedobjects.UserDefinedObjectDisplayContext: Displays a single line "Standard Text" string using "Screen Geometry" for a UserDefinedObject .
displaySection() - Method in interface nxopen.cae.MeshCollectorDisplayDefaults1d: Returns the display 1d element section setting.
displaySection() - Method in interface nxopen.cae.MeshDisplaySettings1d: Returns the display 1d element section setting.
displaySectionEndRelease() - Method in interface nxopen.cae.MeshCollectorDisplayDefaults1d: Returns the display 1d element section end release visibility setting.
displaySectionEndRelease() - Method in interface nxopen.cae.MeshDisplaySettings1d: Returns the display 1d element section end release visibility setting.
DisplaySectioningData() - Constructor for class nxopen.ModelingView.DisplaySectioningData
displaySectioningToggle() - Method in interface nxopen.ModelingView: Returns the toggle between enabling or disabling the Dynamic Sectioning viewing
License requirements: None.
displaySectionLine() - Method in interface nxopen.drawings.SectionViewStyle: Returns the status of display section line.
displaySectionLine() - Method in interface nxopen.drawings.ViewStyleSectionBuilder: Returns the display section line toggle on the SECTION tab of the View Style Dialog
License requirements: None.
displaySectionMappingWarning() - Method in interface nxopen.preferences.SessionSketch: Returns the display section mapping warning flag.
displaySectionOrientation() - Method in interface nxopen.cae.MeshCollectorDisplayDefaults1d: Returns the display 1d element section orientation visibility setting.
displaySectionOrientation() - Method in interface nxopen.cae.MeshDisplaySettings1d: Returns the display 1d element section orientation visibility setting.
displaySectionOrientationVector() - Method in interface nxopen.cae.MeshCollectorDisplayDefaults1d: Returns the display 1d element section orientation vector visibility setting.
displaySectionOrientationVector() - Method in interface nxopen.cae.MeshDisplaySettings1d: Returns the display 1d element section orientation vector visibility setting.
DisplaySectionType - Class in nxopen.cae: specifies the type of display for 1d element sections
displaySelectedObjects() - Method in interface nxopen.cam.Preferences: Returns the display selected objects
License requirements: None.
DisplaySettings() - Constructor for class nxopen.cae.modelcheck.DuplicateElementsCheckBuilder.DisplaySettings
DisplaySettings(boolean, boolean, NXColor, DisplayableObject.ObjectWidth) - Constructor for class nxopen.cae.modelcheck.DuplicateElementsCheckBuilder.DisplaySettings: Constructor for the DisplaySettings object.
DisplaySettings() - Constructor for class nxopen.cae.modelcheck.DuplicateNodesCheckBuilder.DisplaySettings
DisplaySettings(boolean, boolean, boolean, NXColor, NXColor, NXColor) - Constructor for class nxopen.cae.modelcheck.DuplicateNodesCheckBuilder.DisplaySettings: Constructor for the DisplaySettings object.
displaySettingsData() - Method in interface nxopen.cae.modelcheck.DuplicateElementsCheckBuilder: Returns the display settings for duplicate elements
License requirements: None.
displaySettingsData() - Method in interface nxopen.cae.modelcheck.DuplicateNodesCheckBuilder: Returns the display settings for duplicate nodes
License requirements: None.
displayShadedEdges() - Method in interface nxopen.cae.MeshCollectorDisplayDefaults2d: Returns the element shaded edge visibility.
displayShadedEdges() - Method in interface nxopen.cae.MeshCollectorDisplayDefaults3d: Returns the element shaded edge visibility.
displayShadedEdges() - Method in interface nxopen.cae.MeshDisplaySettings2d: Returns the element shaded edge visibility.
displayShadedEdges() - Method in interface nxopen.cae.MeshDisplaySettings3d: Returns the element shaded edge visibility.
displaySheetSizeInBorder() - Method in interface nxopen.drawings.SheetBorderSettingsBuilder: Returns the display sheet size in border
License requirements: None.
DisplaySilhouette - Interface in nxopen.cam: Represents a display silhouette Builder
This is an abstract class and cannot be instantiated.
displaySketDimensions(Tag, int, Tag[], int, int, int) - Method in interface nxopen.uf.UFDisp: Refer to UF_DISP_display_sket_dimensions for documentation.
DisplaySolidBuilder - Interface in nxopen.features.shipdesign: This class is used to identify ship structure that is to have a temporary solid display built for it.
DisplaySolidBuilder.DisplayOptionTypes - Class in nxopen.features.shipdesign: Used to specify how the basic design profile system objects are displayed.
displayStationary() - Method in interface nxopen.cam.SimulationOptionsBuilder: Returns the display stationary
License requirements: None.
displayStatus() - Method in interface nxopen.die.CastReliefParentBuilder: Returns the display status of cast relief, if true input data to the cast relief will be displayed, if false the input data will not be displayed.
displayStatus() - Method in interface nxopen.die.ConnectProfileParentBuilder: Returns the display status of die pierce holes
License requirements: ug_die_design ("Die Design")
.
displayStatus() - Method in interface nxopen.die.DeckParentBuilder: Returns the display status of deck, if true input data to the deck will be displayed, if false the input data will not be displayed.
displayStatus() - Method in interface nxopen.die.DrawDiePunchSectionBuilder: Returns the display status of the draw die punch casting, if true input data to the draw die punch casting will be displayed, if false the input data will not be displayed.
displayStatus() - Method in interface nxopen.die.FlangeSteelRibChildBuilder: Returns the display status of the Flange Steel Rib
License requirements: ug_die_design ("Die Design")
.
displayStatus() - Method in interface nxopen.die.FlangeSteelRibParentBuilder: Returns the display status of the Flange Steel Ribs
License requirements: ug_die_design ("Die Design")
.
displayStatus() - Method in interface nxopen.die.HandlingCoreChildBuilder: Returns the display status of the handling core, if true input data to the handling core will be displayed, if false the input data will not be displayed.
displayStatus() - Method in interface nxopen.die.HandlingCoreParentBuilder: Returns the display status of handling cores, if true input data to the handling cores will be displayed, if false the input data will not be displayed.
displayStatus() - Method in interface nxopen.die.HoleChildBuilder: Returns the display status of the die hole, if true input data to the hole will be displayed, if false the input data will not be displayed.
displayStatus() - Method in interface nxopen.die.HoleParentBuilder: Returns the display status of die holes, if true input data to the holes will be displayed, if false the input data will not be displayed.
displayStatus() - Method in interface nxopen.die.KeywayChildBuilder: Returns the display status of the keyway, if true input data to the keyway will be displayed, if false the input data will not be displayed.
displayStatus() - Method in interface nxopen.die.KeywayParentBuilder: Returns the display status of keyways, if true input data to the keyways will be displayed, if false the input data will not be displayed.
displayStatus() - Method in interface nxopen.die.PadChildBuilder: Returns the display status of the die pad, if true input data to the pad will be displayed, if false the input data will not be displayed.
displayStatus() - Method in interface nxopen.die.PadParentBuilder: Returns the display status of die pads, if true input data to the pads will be displayed, if false the input data will not be displayed.
displayStatus() - Method in interface nxopen.die.PierceHoleChildBuilder: Returns the display status of the pierce hole
License requirements: ug_die_design ("Die Design")
.
displayStatus() - Method in interface nxopen.die.PierceHoleParentBuilder: Returns the display status of pierce holes
License requirements: ug_die_design ("Die Design")
.
displayStatus() - Method in interface nxopen.die.PointChildBuilder: Returns the display status of the point, if true input data to the point will be displayed, if false the input data will not be displayed.
displayStatus() - Method in interface nxopen.die.PointParentBuilder: Returns the display status of points, if true input data to the points will be displayed, if false the input data will not be displayed.
displayStatus() - Method in interface nxopen.die.PressureSystemChildBuilder: Returns the display status of the pressure system, if true input data to the pressure system will be displayed, if false the input data will not be displayed.
displayStatus() - Method in interface nxopen.die.PressureSystemParentBuilder: Returns the display status of pressure systems, if true input data to the pressure systems will be displayed, if false the input data will not be displayed.
displayStatus() - Method in interface nxopen.die.RibChildBuilder: Returns the display status of the die rib, if true input data to the rib will be displayed, if false the input data will not be displayed.
displayStatus() - Method in interface nxopen.die.RibParentBuilder: Returns the display status of die ribs, if true input data to the ribs will be displayed, if false the input data will not be displayed.
displayStatus() - Method in interface nxopen.die.RotorSectionBuilder: Returns the display status of the die rotor casting
License requirements: ug_die_design ("Die Design")
.
displayStatus() - Method in interface nxopen.die.SteelInsertSegmentChildBuilder: Returns the display status of die sisegs
License requirements: ug_die_design ("Die Design")
.
displayStatus() - Method in interface nxopen.die.SteelInsertSegmentParentBuilder: Returns the display status of die sisegs
License requirements: ug_die_design ("Die Design")
.
displayStatus() - Method in interface nxopen.die.ThroatChildBuilder: Returns the display status of the throat section, if true input data to the throat section will be displayed, if false the input data will not be displayed.
displayStatus() - Method in interface nxopen.die.ThroatParentBuilder: Returns the display status of the throat sections, if true input data to the throat sections will be displayed, if false the input data will not be displayed.
displayStatus() - Method in interface nxopen.die.WearPlateLocChildBuilder: Returns the display status of wear plate and locators
License requirements: ug_die_design ("Die Design")
.
displayStatus() - Method in interface nxopen.die.WearPlateLocParentBuilder: Returns the display status of wear plate and locators
License requirements: ug_die_design ("Die Design")
.
displayStatus() - Method in interface nxopen.Layout: Returns whether the layout is displayed or not.
displayStrain() - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder: Display strain analysis result.
displayStress() - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder: Display stress analysis result.
displayStyle() - Method in interface nxopen.annotations.OffsetCenterPointBuilder: Returns the display style
License requirements: None.
displayStyle() - Method in interface nxopen.cae.xyplot.BasicModel: Returns the model display style
License requirements: nx_ftk ("NX Advanced Graphing")
.
displayStyle() - Method in interface nxopen.visualreporting.GroupLabel: Returns the GroupLabel.DisplayStyleOption of the GroupLabel
License requirements: None.
displaySuppressedConstraints() - Method in interface nxopen.assemblies.PositioningTask: Returns the flag indicating whether suppressed constraints of work collection design elements of this positioning task are to be displayed on the graphics window or not.
displaySuppressedConstraints() - Method in interface nxopen.positioning.ComponentPositioner: Returns the flag indicating whether suppressed constraints in the part of this positioner are to be displayed on the graphics window or not.
displayTechnique() - Method in interface nxopen.ModelingViewHighQualityImage: Returns the display technique to use for the generation of the High Quality Image.
displayTemplatePart() - Method in interface nxopen.drawings.AutomationTemplateRegionBuilder: Returns the value that determines whether or not regions should be displayed in a non-template part.
displayTemporaryAbsoluteGeometry(int, View, TransientText.ViewType, DisplayableObject, Point3d) - Method in interface nxopen.display.TransientText: Displays text as temporary display using absolute geometry.
displayTemporaryAbsRotScreenSizeGeometry(int, View, TransientText.ViewType, DisplayableObject, Point3d) - Method in interface nxopen.display.TransientText: Displays text as temporary display using screen geometry but with rotation defined in absolute space.
displayTemporaryArc(Tag, UFDisp.ViewType, double[], double, double, double[], double, UFObj.DispProps) - Method in interface nxopen.uf.UFDisp: Refer to UF_DISP_display_temporary_arc for documentation.
displayTemporaryLine(Tag, UFDisp.ViewType, double[], double[], UFObj.DispProps) - Method in interface nxopen.uf.UFDisp: Refer to UF_DISP_display_temporary_line for documentation.
displayTemporaryPoint() - Method in interface nxopen.blockstyler.SpecifyLocation: Returns the DisplayTemporaryPoint
License requirements: None.
displayTemporaryPoint(Tag, UFDisp.ViewType, double[], UFObj.DispProps, UFDisp.PolyMarker) - Method in interface nxopen.uf.UFDisp: Refer to UF_DISP_display_temporary_point for documentation.
displayTemporaryScreenGeometry(int, View, TransientText.ViewType, DisplayableObject, Point3d) - Method in interface nxopen.display.TransientText: Displays text as temporary display using screen geometry.
displayTemporaryText(Tag, UFDisp.ViewType, String, double[], UFDisp.TextRef, UFObj.DispProps, double, int) - Method in interface nxopen.uf.UFDisp: Refer to UF_DISP_display_temporary_text for documentation.
displayText() - Method in interface nxopen.cae.MeshCollectorDisplayDefaults0d: Returns the display element text visibility setting.
displayText() - Method in interface nxopen.cae.MeshCollectorDisplayDefaults1d: Returns the display element text visibility setting.
displayText() - Method in interface nxopen.cae.MeshDisplaySettings0d: Returns the display element text visibility setting.
displayText() - Method in interface nxopen.cae.MeshDisplaySettings1d: Returns the display element text visibility setting.
displayText(String, Point3d, UserDefinedObjectDisplayContext.TextRef) - Method in interface nxopen.userdefinedobjects.UserDefinedObjectDisplayContext: Displays a text string using an NX text font for a UserDefinedObject .
displayThickness() - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder: Display thickness analysis result.
displayThickShell() - Method in interface nxopen.cae.MeshCollectorDisplayDefaults2d: Returns the element thick shell display setting.
displayThickShell() - Method in interface nxopen.cae.MeshDisplaySettings2d: Returns the element thick shell display setting.
displayThinning() - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder: Display thinning analysis result.
DisplayTool - Interface in nxopen.cam: Represents a display tool Builder
This is an abstract class and cannot be instantiated.
DisplayTool.ToolDisplayTypes - Class in nxopen.cam: the tool display types .
displayTrailingZeros() - Method in interface nxopen.annotations.UnitsFormatPreferences: Returns the flag indicating whether to display trailing zeros on dimension values
License requirements: None.
displayTrailingZeros() - Method in interface nxopen.annotations.UnitsStyleBuilder: Returns the display trailing zeros setting for linear dimensions and tolerances
License requirements: None.
displayTrailingZeros - Variable in class nxopen.uf.UFDrf.UnitsFormatPreferences
displayTransform() - Method in interface nxopen.cam.InspectionMeasDataBuilder: Returns the display transform
License requirements: None.
displayTurningIpw() - Method in interface nxopen.cam.Preferences: Returns the display turning ipw
License requirements: None.
displayType - Variable in class nxopen.annotations.NarrowDimensionData
displayType() - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder: Returns the display type for curvature values.
displayType - Variable in class nxopen.uf.UFDrf.NarrowDimensionInfo
displayType - Variable in class nxopen.uf.UFGdt.LimitsAndFitsData
displayUnicodeMarker(String, int, String, Point3d, double) - Method in interface nxopen.userdefinedobjects.UserDefinedObjectDisplayContext: Displays a single character in the given font and style centered at the given position.
displayUpdateReport() - Method in interface nxopen.preferences.SessionAssemblies: Returns the display update report option
License requirements: None.
displayUpdateStatusReport(Part) - Method in interface nxopen.Information: Displays status of all the features that failed to update in the ListingWindow .
displayUrl(String) - Method in interface nxopen.uf.UFUi: Refer to UF_UI_display_url for documentation.
displayUrlAndActivate(String) - Method in interface nxopen.uf.UFUi: Refer to UF_UI_display_url_and_activate for documentation.
displayUsertool(int, boolean) - Method in interface nxopen.uf.UFUi: Refer to UF_UI_display_usertool for documentation.
displayUvDirs(Tag) - Method in interface nxopen.uf.UFScop: Refer to UF_SCOP_display_uv_dirs for documentation.
displayValue() - Method in interface nxopen.pdm.EffectivityAttributePropertiesBuilder: Returns the display value.
displayWv(String, String) - Method in interface nxopen.uf.UFHelp: Deprecated.
The equivalent Open C method has retired
DispMesh() - Constructor for class nxopen.uf.UFSf.DispMesh
DispMesh(UFSf.MeshDimension, int, int, int, double[][], int[], int[], int[][]) - Constructor for class nxopen.uf.UFSf.DispMesh
dispose() - Method in interface nxopen.TransientObject: Frees the resources held by this object.
disposeCloneObject(CloneObject) - Method in interface nxopen.tooling.ElectrodeInitializationBuilder: Disposes the clone object.
disposition() - Method in interface nxopen.cae.CompanionResultBuilder: Returns the file disposition attribute indicates how the companion result file will be disposed of when the primary results are gone.
dispPar1 - Variable in class nxopen.uf.UFCurve.Bcmmcp
dispPar2 - Variable in class nxopen.uf.UFCurve.Bcmmcp
DispProps() - Constructor for class nxopen.uf.UFObj.DispProps
DispProps(int, int, int, int, int, boolean) - Constructor for class nxopen.uf.UFObj.DispProps
dispToolEnd() - Method in interface nxopen.cam.DmBndBuilder: Returns the Display Tool End
License requirements: None.
dissectExpString(String) - Method in interface nxopen.uf.UFModlGeneral: Refer to UF_MODL_dissect_exp_string for documentation.
DissectExpStringData() - Constructor for class nxopen.uf.UFModlGeneral.DissectExpStringData
dissociateItem(String, String) - Method in interface nxopen.mechatronics.SystemObject: Dissociate a specified item from this system object.
DIST - Static variable in class nxopen.cam.OperationBuilder.OptimizationBasedOnTypes: dist
distance() - Method in interface nxopen.annotations.HatchBuilder: Deprecated.
Deprecated in NX7.5.0. Use HatchFillSettingsBuilder instead.
distance() - Method in interface nxopen.annotations.HatchFillSettingsBuilder: Returns the distance
License requirements: None.
distance() - Method in interface nxopen.annotations.OffsetCenterPointBuilder: Returns the offset distance, valid for all offset method types except those by position
License requirements: None.
distance() - Method in interface nxopen.assemblies.ProximitySearchTermBuilder: Returns the distance.
distance() - Method in interface nxopen.cae.ElementExtrudeBuilder: Returns the distance
License requirements: None.
distance() - Method in interface nxopen.cae.ElementTranslateBuilder: Returns the total distance for translation along a vector
License requirements: None.
distance() - Method in interface nxopen.cae.MeshPointMultipleOnCurveBuilder: Returns the distance
License requirements: None.
distance() - Method in interface nxopen.cae.NodesOnCurveBuilder: Returns the distance
License requirements: None.
distance() - Method in interface nxopen.cae.optimization.TBSTopologyRestrictAreaBuilder: Returns the distance value
License requirements: None.
distance() - Method in interface nxopen.cam.AlongToolAxisMoveBuilder: Returns the location
License requirements: None.
distance() - Method in interface nxopen.cam.BladeCutLevels: Returns the distance
License requirements: None.
distance() - Method in interface nxopen.cam.BoundaryTurnMemberCorner: Returns the corner distance
License requirements: None.
distance() - Method in interface nxopen.cam.BoundaryTurnMemberFineFinishCorner: Returns the fine_finish_corner distance
License requirements: None.
distance() - Method in interface nxopen.cam.BoundaryTurnMemberOffset: Returns the offset distance (general and legacy)
License requirements: None.
DISTANCE - Static variable in class nxopen.cam.BoundaryTurnVariableStock.PositionType
DISTANCE - Static variable in class nxopen.cam.CenterlineDrillTurningBuilder.DepthTypes: Depth options: Distance
DISTANCE - Static variable in class nxopen.cam.CircularAboutAxisMoveBuilder.ExtensionType: Distance
DISTANCE - Static variable in class nxopen.cam.CylinderMillingBuilder.BlankDiameterTypes: distance
DISTANCE - Static variable in class nxopen.cam.CylinderMillingBuilder.DepthPerRevolutionTypes: Distance
DISTANCE - Static variable in class nxopen.cam.DPMItpBuilder.StepoverTypeOption: stepover distance
distance() - Method in interface nxopen.cam.ExtendAtEdges: Returns the Extend at Edges distance
License requirements: None.
distance() - Method in interface nxopen.cam.InPathEventDataBuilder: Returns the Inpath Events Distance
License requirements: cam_base ("CAM BASE")
.
DISTANCE - Static variable in class nxopen.cam.InspectionAlignmentBuilder.XtMethods: Translate a distance
DISTANCE - Static variable in class nxopen.cam.InspectionAlignmentBuilder.YtMethods: Translate a distance
DISTANCE - Static variable in class nxopen.cam.InspectionAlignmentBuilder.ZtMethods: Translate a distance
DISTANCE - Static variable in class nxopen.cam.InspectionMethodBuilder.UVModeTypes: Distance from start and end in part units
DISTANCE - Static variable in class nxopen.cam.InspectionMoveBuilder.DepthMethodTypes: Distance only
DISTANCE - Static variable in class nxopen.cam.IpwContainmentCurvesBuilder.ThicknessModeValue: use thickness mode distance
distance() - Method in interface nxopen.cam.LaserLinearMove: Returns the Distance
License requirements: None.
distance() - Method in interface nxopen.cam.MaxCutTraverse: Returns the max cut traverse distance
License requirements: None.
DISTANCE - Static variable in class nxopen.cam.MaxCutTraverse.Types: distance
distance - Variable in class nxopen.cam.MillingTrackpointBuilder.CalculateDistanceData: the distance
distance - Variable in class nxopen.cam.MillingTrackpointBuilder.Data: the distance
distance - Variable in class nxopen.cam.MillingTrackpointBuilder.TrackPointData: the distance
distance() - Method in interface nxopen.cam.MinCutDepth: Returns the distance of Minimum Cut Depth
License requirements: None.
distance() - Method in interface nxopen.cam.MinCutLength: Returns the distance of Minimum Cut Length
License requirements: None.
distance - Variable in class nxopen.cam.MultipleStepoverBuilder.Data: the new value of distance
DISTANCE - Static variable in class nxopen.cam.NcmHoleMachining.FinalTypes: distance
DISTANCE - Static variable in class nxopen.cam.NcmHoleMachining.InitialTypes: distance
DISTANCE - Static variable in class nxopen.cam.NcmPlanarBuilder.FinalTypes: distance
DISTANCE - Static variable in class nxopen.cam.NcmPlanarBuilder.InitialTypes: distance
DISTANCE - Static variable in class nxopen.cam.NcmScEngRetBuilder.MeasureFromTypes: Measure from distance
distance() - Method in interface nxopen.cam.NormalToToolAxisMoveBuilder: Returns the distance
License requirements: None.
distance() - Method in interface nxopen.cam.PitchSetting: Returns the distance
License requirements: None.
distance() - Method in interface nxopen.cam.ReliefCut: Returns the relief cut distance
License requirements: None.
distance() - Method in interface nxopen.cam.ReliefPlunge: Returns the relief plunge distance
License requirements: None.
DISTANCE - Static variable in class nxopen.cam.ReliefPlunge.UnitTypes: Relief plunge Unit: inch or metric
DISTANCE - Static variable in class nxopen.cam.RoughTurningBuilder.PartOffDepthModeTypes: Part Off Depth Mode: Distance
distance() - Method in interface nxopen.cam.StepUpBuilder: Returns the parameter to define the step up distance
License requirements: None.
distance() - Method in interface nxopen.cam.StopPosition: Returns the stop at distance
License requirements: None.
DISTANCE - Static variable in class nxopen.cam.StopPosition.Types: Stop At mode: Distance
DISTANCE - Static variable in class nxopen.cam.TrimPlane.LimitOptions: Plane is defined by a distance value.
DISTANCE - Static variable in class nxopen.cam.TurnAvoidanceClearanceBuilder.AxialPlaneModes: Plane is defined by distance value.
DISTANCE - Static variable in class nxopen.cam.TurnAvoidanceClearanceBuilder.RadialPlaneModes: Plane is defined by distance value.
distance() - Method in interface nxopen.cam.TurnEngageRetractBuilder: Returns the Distance
License requirements: None.
DISTANCE - Static variable in class nxopen.cam.TurnEngageRetractBuilder.ExtendMethods: Extend by distance
DISTANCE - Static variable in class nxopen.cam.TurnFeatureGeomBuilder.SurfaceSensitivityModes: Surface sensitivity is active.
DISTANCE - Static variable in class nxopen.cam.TurnGrooveCornerControl.ReliefPlungeTypes: Groove Corner Control Relief Plunge Type is Distance.
distance() - Method in interface nxopen.cam.TurnOverlap: Returns the overlap distance
License requirements: None.
DISTANCE - Static variable in class nxopen.cam.TurnOverlap.Types: Overlap mode: Distance (mm/inch)
DISTANCE - Static variable in class nxopen.cam.TurnProbeClearanceBuilder.AxialPlaneModes: Plane is defined by distance value.
DISTANCE - Static variable in class nxopen.cam.TurnProbeClearanceBuilder.RadialPlaneModes: Plane is defined by distance value.
distance() - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder: Returns the local distance value
License requirements: None.
DISTANCE - Static variable in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.ModeTypes: Local Return: Distance
distance() - Method in interface nxopen.cam.VectorDistanceMoveBuilder: Returns the Distance
License requirements: None.
DISTANCE - Static variable in class nxopen.cam.VectorDistanceMoveBuilder.EndType: end at distance
distance() - Method in interface nxopen.cam.VerticalPosition: Returns the distance
License requirements: None.
DISTANCE - Static variable in class nxopen.cam.VerticalPosition.OffsetTypes: Distance
DISTANCE - Static variable in class nxopen.DatumConstraint.CurveOption: Absolute distance
DISTANCE - Static variable in class nxopen.DatumConstraint.Type
distance() - Method in interface nxopen.die.ClearanceBuilder: Returns the expression containing the distance value for extrusions when defining the clearance area.
DISTANCE - Static variable in class nxopen.ExtrudeLimitDataLimitType
distance() - Method in interface nxopen.facet.ExtrudeFacetBodyBuilder: Returns the distance used when limit type is ExtrudeFacetBodyBuilder.LimitType.DISTANCE
License requirements: None.
DISTANCE - Static variable in class nxopen.facet.ExtrudeFacetBodyBuilder.LimitType: Specify the limit by direction and distance.
distance() - Method in interface nxopen.features.AdmOffsetRegionBuilder: Returns the offset distance
License requirements: None.
DISTANCE - Static variable in class nxopen.features.DatumAxisBuilder.ConstraintType: Distance constraint
DISTANCE - Static variable in class nxopen.features.DatumAxisBuilder.CurveOption: Absolute distance
DISTANCE - Static variable in class nxopen.features.DatumPlaneBuilder.ConstraintType: Distance constraint
DISTANCE - Static variable in class nxopen.features.DatumPlaneBuilder.CurveOption: Absolute distance.
distance() - Method in interface nxopen.features.EmbossLimit: Returns the default distance for offset or translation
License requirements: None.
distance() - Method in interface nxopen.features.EmbossTarget: Returns the offset/translate distance
License requirements: None.
distance() - Method in interface nxopen.features.GeodesicChamferBuilder: Returns the distance
License requirements: None.
DISTANCE - Static variable in class nxopen.features.GlobalShapingBuilder.RotationMethodType: Rotation specified by distance
distance() - Method in interface nxopen.features.MoveFaceBuilder: Returns the distance for direction and distance option, don't use it until nx502
License requirements: None.
DISTANCE - Static variable in class nxopen.features.OffsetCurveBuilder.Types: Distance
distance() - Method in interface nxopen.features.OffsetEdgeBuilder: Returns the distance for offset edge
License requirements: None.
distance() - Method in interface nxopen.features.OffsetFaceBuilder: Returns the distance
License requirements: None.
distance() - Method in interface nxopen.features.OffsetMoveCurveBuilder: Returns the offset distance
License requirements: None.
distance() - Method in interface nxopen.features.OffsetRegionBuilder: Returns the distance to offset, don't use it until nx502
License requirements: None.
distance() - Method in interface nxopen.features.PatchOpeningsBuilder: Returns the extension distance, used only when type is Features.PatchOpeningsBuilder.Types#EXTENSION
License requirements: None.
distance() - Method in interface nxopen.features.SectionInertiaAnalysisBuilder: Returns the distance
License requirements: None.
DISTANCE - Static variable in class nxopen.features.sheetmetal.AeroFlangeBuilder.CompType: Distance
DISTANCE - Static variable in class nxopen.features.sheetmetal.BendTaperBuilder.BendTaperInputMethod: Distance
distance() - Method in interface nxopen.features.shipdesign.OrientationPointMethodsBuilder: Returns the distance used to determine the boundary of the region.
distance() - Method in interface nxopen.features.subdivision.SubdivisionExtrudeCageBuilder: Returns the distance.
DISTANCE - Static variable in class nxopen.geometricutilities.AlignmentMethodBuilder.Type
distance() - Method in interface nxopen.geometricutilities.AngularLimits: Returns a computed distance
License requirements: solid_modeling ("SOLIDS MODELING")
.
DISTANCE - Static variable in class nxopen.geometricutilities.AngularPatternSpacing.UsePitchOptions: distance is pitch value.
distance() - Method in interface nxopen.geometricutilities.CurveExtendData: Returns the distance
License requirements: None.
distance() - Method in interface nxopen.geometricutilities.ModlDistanceAngle: Returns the distance of linear transform.
DISTANCE - Static variable in class nxopen.geometricutilities.ModlMotion.Options: Move by Distance
DISTANCE - Static variable in class nxopen.MeasureDistanceBuilder.DistanceType
distance - Variable in class nxopen.Measurement.MinimumDistanceData: minimum distance between two objects
DISTANCE - Static variable in class nxopen.PlaneTypes.MethodType: Distance method
DISTANCE - Static variable in class nxopen.PointCollection.AlongCurveOption: Scalar is an absolute distance.
DISTANCE - Static variable in class nxopen.positioning.Constraint.Type: Two geometries have a specified distance between them
distance() - Method in interface nxopen.routing.OverstockBuilder: Returns the distance over which the pieces of overstock can possibly range for OverstockBuilder.ApplicationType.INTERVAL method.
distance() - Method in interface nxopen.SketchOffsetBuilder: Returns the offset distance expression
License requirements: None.
DISTANCE - Static variable in class nxopen.tooling.ChannelAdjustBuilder.AdjustType: Reposition the target channels.
distance() - Method in interface nxopen.tooling.ChannelAdjustBuilder: Returns the distance between the channels and faces.
distance - Variable in class nxopen.uf.UFCutter.TrackingPointData
distance - Variable in class nxopen.uf.UFDraw.BreakRegionData
distance - Variable in class nxopen.uf.UFDrf.DraftAidTextInfo
distance - Variable in class nxopen.uf.UFEvalsf.Pos3
distance - Variable in class nxopen.uf.UFGdt.AskTargetAreaXhatchData
distance - Variable in class nxopen.uf.UFModl.AskBallSlotParmsData
distance - Variable in class nxopen.uf.UFModl.AskDovetailSlotParmsData
distance - Variable in class nxopen.uf.UFModl.AskRectSlotParmsData
distance - Variable in class nxopen.uf.UFModl.AskTSlotParmsData
distance - Variable in class nxopen.uf.UFModl.AskUSlotParmsData
distance - Variable in class nxopen.uf.UFModl.EdgeBlendSetbackData
distance - Variable in class nxopen.uf.UFModl.EdgeBlendStopshortData
distance(double[], double[]) - Method in interface nxopen.uf.UFVec2: Refer to UF_VEC2_distance for documentation.
distance(double[], double[]) - Method in interface nxopen.uf.UFVec3: Refer to UF_VEC3_distance for documentation.
distance - Variable in class nxopen.uf.UFView.AskPerspectiveData
DISTANCE - Static variable in class nxopen.weld.JointmarkGuideBuilder.SpaceOption: Distance
DISTANCE - Static variable in class nxopen.weld.WeldPointSpacingMethod: Place multiple spot welds based on distance
distance1() - Method in interface nxopen.SketchChamferBuilder: Returns the distance for line 1 for Symmetric, Asymmetric, and for OffSet and Angle Chamfer
License requirements: drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
distance1 - Variable in class nxopen.uf.UFCurve.Bcmmcp
distance2() - Method in interface nxopen.SketchChamferBuilder: Returns the distance for line 2 for Asymmetric Chamfer
License requirements: drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
distance2 - Variable in class nxopen.uf.UFCurve.Bcmmcp
DISTANCE_ALLOWANCE - Static variable in class nxopen.tooling.WorkpieceBuilder.MethodType: Create block by define the distance allowance
DISTANCE_ANGLE - Static variable in class nxopen.geometricutilities.ModlMotion.Options: Move by Distance-Angle
DISTANCE_BETWEEN - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.TolType: Distance Between
DISTANCE_BETWEEN_POINTS - Static variable in class nxopen.geometricutilities.ModlMotion.Options: Move by Distance between Points
DISTANCE_DIM - Static variable in class nxopen.uf.UFModl.DfoConstraintType
DISTANCE_FROM_END - Static variable in class nxopen.cam.InPathEventDataBuilder.LocationMethod: Distance From End
DISTANCE_FROM_START - Static variable in class nxopen.cam.InPathEventDataBuilder.LocationMethod: Distance From Start
DISTANCE_MEASUREMENT - Static variable in class nxopen.uf.UFMotion.MeasurementType
DISTANCE_METHOD - Static variable in class nxopen.annotations.Centerline2dBuilder.Offset: offset distance method
DISTANCE_METHOD - Static variable in class nxopen.annotations.Centerline3dBuilder.Offset: Offset Distance
DISTANCE_OR_TIME - Static variable in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.LimitTypes: mm,inch or sec
DISTANCE_TO_WALL - Static variable in class nxopen.cam.ReliefPlunge.Types: Relief plunge: Distance to Wall
distanceAngle() - Method in interface nxopen.geometricutilities.ModlMotion: Returns the distance-angle of ModlMotion.Options.DISTANCE_ANGLE motion option.
distanceAngleDivision() - Method in interface nxopen.cam.InspectionOperationTransformBuilder: Returns the distance angle division
License requirements: None.
distanceAngleDivision() - Method in interface nxopen.cam.OperationTransformBuilder: Returns the distance angle division
License requirements: None.
distanceBelow() - Method in interface nxopen.cam.CutLevel: Returns the distance below the bottom of the last range
License requirements: None.
distanceBetween() - Method in interface nxopen.cae.WeldBuilder: Returns the distance between the points on the edge(s) used to specify the location of the weld
License requirements: None.
distanceBetweenAnnotations() - Method in interface nxopen.drafting.AutomationPreferencesBuilder: Returns the distance between annotations
License requirements: None.
distanceBetweenPointsDistance() - Method in interface nxopen.geometricutilities.ModlMotion: Returns the distance of ModlMotion.Options.DISTANCE_BETWEEN_POINTS motion option.
distanceBetweenPointsMeasurePoint() - Method in interface nxopen.geometricutilities.ModlMotion: Returns the measure point of ModlMotion.Options.DISTANCE_BETWEEN_POINTS motion option.
distanceBetweenPointsOriginDistance() - Method in interface nxopen.geometricutilities.ModlMotion: Returns the distance between origin point and face of ModlMotion.Options.DISTANCE_BETWEEN_POINTS motion option.
distanceBetweenPointsOriginPoint() - Method in interface nxopen.geometricutilities.ModlMotion: Returns the origin point of ModlMotion.Options.DISTANCE_BETWEEN_POINTS motion option.
distanceBetweenPointsVector() - Method in interface nxopen.geometricutilities.ModlMotion: Returns the direction of ModlMotion.Options.DISTANCE_BETWEEN_POINTS motion option.
distanceBetweenSymbolAndDimensionText() - Method in interface nxopen.annotations.DiameterRadiusPreferences: Returns the distance between diameter/radius symbol and dimension text
License requirements: None.
distanceBuilder() - Method in interface nxopen.cam.StepoverBuilder: Returns the distance (inheritable tool dependent)
License requirements: None.
distanceCollector1() - Method in interface nxopen.MeasureDistanceBuilder: Returns the first collector of objects for distance between two collectors
License requirements: None.
distanceCollector2() - Method in interface nxopen.MeasureDistanceBuilder: Returns the second collector of objects for distance between two collectors
License requirements: None.
distanceEnum() - Method in interface nxopen.cae.CorrelFineTuneAlignmentBuilder: Returns the distance vector enumeration
License requirements: None.
distanceExp() - Method in interface nxopen.cae.CorrelFineTuneAlignmentBuilder: Returns the distance expression
License requirements: None.
distanceExp - Variable in class nxopen.features.EdgeBlendBuilder.SetbackData: The distance for the setback on each edge.
distanceExp - Variable in class nxopen.features.EdgeBlendBuilder.StopshortData: The distance for the stopshort on the edge.
distanceExp - Variable in class nxopen.uf.UFModl.EdgeBlendSetbackData
distanceExp - Variable in class nxopen.uf.UFModl.EdgeBlendStopshortData
distanceFromBoundary() - Method in interface nxopen.cam.BoundaryTurnVariableStockSet: Returns the distance from boundary
License requirements: None.
distanceFromEnd() - Method in interface nxopen.weld.GrooveBuilder: Deprecated.
Deprecated in NX9.0.0. Use WeldGrooveBuilder.endDistance() and nxopen.weld.WeldGrooveBuilder#setEndDistance instead.
distanceFromEnds() - Method in interface nxopen.weld.AutoPointBuilder: Returns the distance from the ends to start creating weld points at
License requirements: None.
distanceFromFloor() - Method in interface nxopen.cam.CutLevelPlanar: Returns the distance from floor
License requirements: None.
distanceFromInnerBorder() - Method in interface nxopen.drawings.SheetBorderSettingsBuilder: Returns the distance from inner border
License requirements: None.
distanceFromStart() - Method in interface nxopen.weld.GrooveBuilder: Deprecated.
Deprecated in NX9.0.0. Use WeldGrooveBuilder.startDistance() and nxopen.weld.WeldGrooveBuilder#setStartDistance instead.
distanceFromTop() - Method in interface nxopen.cam.CutLevelPlanar: Returns the distance from top
License requirements: None.
distanceFromVehicle() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder: Returns the expression containing the value for the distance from vehicle.
distanceFromViewPlane() - Method in interface nxopen.drawings.ViewCopyTo3dBuilder: Returns the option specifying the distance from the view plane
License requirements: None.
distanceLimit() - Method in interface nxopen.cam.ToolPathDivideBuilder: Returns the time limit value
License requirements: None.
distanceLock() - Method in interface nxopen.routing.OverstockBuilder: Returns the distance lock state.
distanceMaximumBuilder() - Method in interface nxopen.cam.StepoverBuilder: Returns the distance maximum(inheritable tool dependent)
License requirements: None.
distanceMinimumBuilder() - Method in interface nxopen.cam.StepoverBuilder: Returns the distance minimum(inheritable tool dependent)
License requirements: None.
distanceOption() - Method in interface nxopen.cae.ElementExtrudeBuilder: Returns the distance option
License requirements: None.
distanceOption() - Method in interface nxopen.cae.ElementTranslateBuilder: Returns the distance option
License requirements: None.
distanceOption() - Method in interface nxopen.cae.NodeRotateBuilder: Returns the distance option
License requirements: None.
distanceOption() - Method in interface nxopen.cae.NodeTranslateBuilder: Returns the distance option
License requirements: None.
DistancePatternSpacing - Interface in nxopen.geometricutilities: defines the various ways pattern instances can be spaced within the pattern, particularly in the context of the PatternDefinition class.
distancePitch() - Method in interface nxopen.geometricutilities.HelixPattern: Returns the distance pitch expression for the Helix type pattern
License requirements: None.
distances - Variable in class nxopen.uf.UFModlGeneral.AskBoundingBoxAlignedData
distances - Variable in class nxopen.uf.UFModlGeneral.AskBoundingBoxExactData
distances - Variable in class nxopen.uf.UFView.AskZClipData
distanceThreshold() - Method in interface nxopen.features.OptimizeCurveBuilder: Returns the distance threshold
License requirements: None.
distanceTol() - Method in interface nxopen.features.SphericalCornerBuilder: Returns the Distance Tolerance
License requirements: None.
distanceTol - Variable in class nxopen.uf.UFCurve.WrapData
distanceTolerance() - Method in interface nxopen.annotations.BoundaryBuilder: Returns the distance tolerance
License requirements: None.
distanceTolerance() - Method in interface nxopen.cam.NCAssistantBuilder: Returns the Distance Tolerance
License requirements: None.
distanceTolerance() - Method in interface nxopen.cam.Topology: Returns the distance tolerance
License requirements: None.
distanceTolerance() - Method in interface nxopen.die.AddendumSectionBuilder: Returns the distance tolerance.
distanceTolerance() - Method in interface nxopen.die.AddSurfBuilder: Returns the distance tolerance.
distanceTolerance() - Method in interface nxopen.die.CastReliefBuilder: Returns the distance tolerance
License requirements: None.
distanceTolerance() - Method in interface nxopen.die.ClampingSlotBuilder: Returns the distance tolerance
License requirements: None.
distanceTolerance() - Method in interface nxopen.die.ClearanceBuilder: Returns the distance tolerance.
distanceTolerance() - Method in interface nxopen.die.CompensateRoughDataBuilder: Returns the distance tolerance.
distanceTolerance() - Method in interface nxopen.die.DieShoeBuilder: Returns the distance tolerance
License requirements: None.
distanceTolerance() - Method in interface nxopen.die.DrawBeadBuilder: Returns the distance tolerance.
distanceTolerance() - Method in interface nxopen.die.DrawDiePunchBuilder: Returns the distance tolerance of the draw die punch casting.
distanceTolerance() - Method in interface nxopen.die.FillAreaBuilder: Returns the distance tolerance.
distanceTolerance() - Method in interface nxopen.die.FillBuilder: Returns the distance tolerance of the area fill
License requirements: die_engineering ("DIE ENGINEERING")
.
distanceTolerance() - Method in interface nxopen.die.FingerClearanceNotchBuilder: Returns the distance tolerance.
distanceTolerance() - Method in interface nxopen.die.FlangeTaskBuilder: Returns the distance tolerance of the flange task
License requirements: die_engineering ("DIE ENGINEERING")
.
distanceTolerance() - Method in interface nxopen.die.FormTaskBuilder: Returns the distance tolerance of the form task.
distanceTolerance() - Method in interface nxopen.die.HandlingCoreBuilder: Returns the distance tolerance.
distanceTolerance() - Method in interface nxopen.die.HeelpostBuilder: Returns the distance tolerance
License requirements: None.
distanceTolerance() - Method in interface nxopen.die.KeywayBuilder: Returns the distance tolerance
License requirements: None.
distanceTolerance() - Method in interface nxopen.die.MachineReliefBuilder: Returns the distance tolerance.
distanceTolerance() - Method in interface nxopen.die.OutputCurvesBuilder: Returns the distance tolerance.
distanceTolerance() - Method in interface nxopen.die.PierceTaskBuilder: Returns the distance tolerance of the pierce task
License requirements: die_engineering ("DIE ENGINEERING")
.
distanceTolerance() - Method in interface nxopen.die.RotorBuilder: Returns the distance tolerance of the rotor casting.
distanceTolerance() - Method in interface nxopen.die.SpringbackCompensationBuilder: Returns the distance tolerance.
distanceTolerance() - Method in interface nxopen.die.SteelInsertBuilder: Returns the distance tolerance of the diesteelinsert casting
License requirements: ug_die_design ("Die Design")
.
distanceTolerance() - Method in interface nxopen.die.TrimLineDevelopmentBuilder: Returns the distance tolerance.
distanceTolerance() - Method in interface nxopen.die.TrimTaskBuilder: Returns the distance tolerance of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.
distanceTolerance - Variable in class nxopen.FaceRegionBoundaryRule.Data: Distance tolerance
distanceTolerance() - Method in interface nxopen.facet.BridgeFacetBodyBuilder: Returns the distance tolerance used in the bridge facet body feature
License requirements: None.
distanceTolerance() - Method in interface nxopen.facet.ExtrudeFacetBodyBuilder: Returns the distance tolerance used in the extrude facet body feature
License requirements: None.
distanceTolerance() - Method in interface nxopen.facet.MergeFacetBodyBuilder: Returns the distance tolerance used in the merge facet body feature
License requirements: None.
distanceTolerance() - Method in interface nxopen.facet.SewFacetBodyBuilder: Returns the distance tolerance used in the merge touching facet body feature
License requirements: None.
distanceTolerance() - Method in interface nxopen.features.AOCSBuilder: Returns the distance tolerance for the AOCS operation.
distanceTolerance() - Method in interface nxopen.features.BlendCornerBuilder: Returns the distance tolerance.
distanceTolerance() - Method in interface nxopen.features.CircularBlendCurveBuilder: Returns the distance tolerance
License requirements: None.
distanceTolerance() - Method in interface nxopen.features.ConcaveFacesBuilder: Returns the distance tolerance.
distanceTolerance() - Method in interface nxopen.features.CurveLengthBuilder: Returns the distance tolerance
License requirements: solid_modeling ("SOLIDS MODELING")
.
distanceTolerance() - Method in interface nxopen.features.CurveOnSurfaceBuilder: Returns the distance tolerance
License requirements: solid_modeling ("SOLIDS MODELING")
.
distanceTolerance() - Method in interface nxopen.features.DraftBuilder: Returns the distance tolerance in [in/mm]
License requirements: solid_modeling ("SOLIDS MODELING")
.
distanceTolerance() - Method in interface nxopen.features.ExtrudeBuilder: Returns the distance tolerance
License requirements: None.
distanceTolerance() - Method in interface nxopen.features.FreeTransformerBuilder: Returns the distance tolerance used in the transformation or morphing calculations
License requirements: None.
distanceTolerance() - Method in interface nxopen.features.GlobalShapingBuilder: Returns the distance tolerance
License requirements: None.
distanceTolerance() - Method in interface nxopen.features.GuidedExtensionBuilderEx: Returns the distance tolerance for use in creating the guided extension surfaces
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
distanceTolerance() - Method in interface nxopen.features.HelixBuilder: Returns the distance tolerance
License requirements: None.
distanceTolerance() - Method in interface nxopen.features.JoinCurvesBuilder: Returns the distance tolerance.
distanceTolerance() - Method in interface nxopen.features.LawCurveBuilder: Returns the distance tolerance
License requirements: None.
distanceTolerance() - Method in interface nxopen.features.LawExtensionBuilder: Returns the distance tolerance
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING")
.
distanceTolerance() - Method in interface nxopen.features.LawExtensionBuilderEx: Returns the distance tolerance
License requirements: None.
distanceTolerance() - Method in interface nxopen.features.MatchEdgeBuilder: Returns the tolerance for extracting BSurface from a face
License requirements: features_modeling ("FEATURES MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
distanceTolerance() - Method in interface nxopen.features.MeshTransformerBuilder: Returns the distance tolerance used in the transformation or morphing calculations
License requirements: None.
distanceTolerance() - Method in interface nxopen.features.MoveCurveBuilder: Returns the distance tolerance
License requirements: None.
distanceTolerance() - Method in interface nxopen.features.OffsetEmbossBuilder: Returns the distance tolerance: The maximum allowable distance between the true theoretical sheet and the body created to approximate it.
distanceTolerance() - Method in interface nxopen.features.OffsetMoveCurveBuilder: Returns the distance tolerance
License requirements: None.
distanceTolerance() - Method in interface nxopen.features.OptimizeFaceBuilder: Returns the distance tolerance
License requirements: None.
distanceTolerance() - Method in interface nxopen.features.OvercrownBuilder: Returns the distance tolerance
License requirements: solid_modeling ("SOLIDS MODELING")
.
distanceTolerance() - Method in interface nxopen.features.PatchOpeningsBuilder: Returns the distance tolerance.
distanceTolerance() - Method in interface nxopen.features.PointSetBuilder: Returns the distance tolerance.
distanceTolerance() - Method in interface nxopen.features.ResizeCurveBuilder: Returns the distance tolerance
License requirements: None.
distanceTolerance() - Method in interface nxopen.features.RibbonBuilder: Returns the distance tolerance
License requirements: None.
distanceTolerance() - Method in interface nxopen.features.shipdesign.AlongGuideCutBuilder: Returns the distance tolerance.
distanceTolerance() - Method in interface nxopen.features.shipdesign.CornerCutBuilder: Returns the distance tolerance.
distanceTolerance() - Method in interface nxopen.features.shipdesign.CuttingSideFacesBuilder: Returns the modeling distance tolerance.
distanceTolerance() - Method in interface nxopen.features.shipdesign.FeatureParmsBuilder: Returns the tolerance used to determine when distances are considered zero.
distanceTolerance() - Method in interface nxopen.features.shipdesign.MarkingLineDesignBuilder: Returns the distance tolerance for marking lines.
distanceTolerance() - Method in interface nxopen.features.shipdesign.OrientationDefinitionBuilder: Returns the distance tolerance used in the orientation objects to determine if locations are coincident.
distanceTolerance() - Method in interface nxopen.features.shipdesign.PillarBuilder: Returns the distance tolerance.
distanceTolerance() - Method in interface nxopen.features.shipdesign.PlateBuilder: Returns the distance tolerance.
distanceTolerance() - Method in interface nxopen.features.shipdesign.ProfileBuilder: Returns the distance tolerance (part units).
distanceTolerance() - Method in interface nxopen.features.shipdesign.ProfileCutoutBuilder: Returns the distance tolerance (part units).
distanceTolerance() - Method in interface nxopen.features.shipdesign.ProfileTransitionBuilder: Returns the distance tolerance (part units)
License requirements: None.
distanceTolerance() - Method in interface nxopen.features.shipdesign.RollingLineBuilder: Returns the modeling distance tolerance.
distanceTolerance() - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder: Returns the modeling distance tolerance.
distanceTolerance() - Method in interface nxopen.features.shipdesign.ShipPreparationBuilder: Returns the distance tolerance.
distanceTolerance() - Method in interface nxopen.features.shipdesign.SplitProfilePlateBuilder: Returns the distance tolerance to determine if a profile is attached to a plate
License requirements: None.
distanceTolerance() - Method in interface nxopen.features.shipdesign.SplitStandardPartBuilder: Returns the tolerance used to determine when distances are considered zero.
distanceTolerance() - Method in interface nxopen.features.shipdesign.SteelInsulationBuilder: Returns the modeling distance tolerance.
distanceTolerance() - Method in interface nxopen.features.shipdesign.StiffenerBuilder: Returns the distance tolerance (part units)
License requirements: None.
distanceTolerance() - Method in interface nxopen.features.shipdesign.WeldCut2Builder: Returns the distance tolerance.
distanceTolerance() - Method in interface nxopen.features.SweepAlongGuideBuilder: Returns the distance tolerance
License requirements: None.
distanceTolerance() - Method in interface nxopen.features.TrimAndExtendBuilder: Returns the distance tolerance
License requirements: None.
distanceTolerance() - Method in interface nxopen.features.VariableOffsetBuilder: Returns the distance tolerance.
distanceTolerance() - Method in interface nxopen.features.VarsweepBuilder: Returns the distance tolerance
License requirements: None.
distanceTolerance() - Method in interface nxopen.features.vehicledesign.AllAroundVisionBuilder: Returns the distance tolerance.
distanceTolerance() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder: Returns the distance tolerance that will be used in constructing the motion envelope.
distanceTolerance() - Method in interface nxopen.features.WrapBuilder: Returns the distance tolerance used to determine the sampling of the curve during processing, and the accuracy of the output.
distanceTolerance() - Method in interface nxopen.geometricanalysis.DeviationChecking: Returns the distance tolerance to be used for the deviation checking
License requirements: None.
distanceTolerance() - Method in interface nxopen.geometricutilities.MatchSurfaceBuilder: Returns the distance tolerance
License requirements: None.
distanceTolerance - Variable in class nxopen.RegionBoundaryRule.Data: Distance tolerance
distanceTolerance() - Method in interface nxopen.Section: Returns the distance tolerance
License requirements: gateway ("UG GATEWAY")
.
distanceTolerance() - Method in interface nxopen.sim.SinumerikCaSimplifyBodiesBuilder: Returns the Distance tolerance used to facet the solids.
distanceTolerance() - Method in interface nxopen.SketchAutoConstrainBuilder: Returns the distance tolerance
License requirements: None.
distanceTolerance() - Method in interface nxopen.SketchEvaluator: Returns the distance tolerance
License requirements: None.
distanceTolerance() - Method in interface nxopen.SketchIntersectionCurveBuilder: Returns the distance tolerance
License requirements: None.
distanceTolerance() - Method in interface nxopen.tooling.BlendCurve3DBuilder: Returns the distance tolerance.
distanceTolerance() - Method in interface nxopen.tooling.GuidedExtensionBuilder: Returns the distance tolerance for use in creating the guided extension surfaces
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING")
.
distanceTolerance() - Method in interface nxopen.tooling.OffsetCurve3DBuilder: Deprecated.
Deprecated in NX10.0.0. Please use CurveFitData.GetTolerance instead
distanceTolerance - Variable in class nxopen.uf.UFModlFeatures.AskTaperFromEdges1Data
distanceTolerance() - Method in interface nxopen.weld.EasyPatternBuilder: Returns the distance tolerance.
distanceTolerance() - Method in interface nxopen.weld.JointmarkBuilder: Returns the distance tolerance
License requirements: ugweld ("UG WELD")
.
distanceTolerance() - Method in interface nxopen.weld.SurfaceWeldBuilder: Returns the distance tolerance for constructing the surface weld.
distanceTolerance() - Method in interface nxopen.weld.WeldBeadBuilder: Returns the distance tolerance for constructing the bead.
distanceTolerance() - Method in interface nxopen.weld.WeldFillBuilder: Returns the distance tolerance used in processing to determine if two points are coincident.
distanceTolerance() - Method in interface nxopen.weld.WeldGrooveBuilder: Returns the distance tolerance
License requirements: ugweld ("UG WELD")
.
distanceTolerance() - Method in interface nxopen.weld.WeldPointBuilder: Returns the distance tolerance for the weld point
License requirements: ugweld ("UG WELD")
.
distanceToleranceData() - Method in interface nxopen.preferences.PartModeling: Returns the modeling distance tolerance data.
distanceToPlane(double[], double[], double[], double) - Method in interface nxopen.uf.UFVec3: Refer to UF_VEC3_distance_to_plane for documentation.
distanceToRoadGeneral() - Method in interface nxopen.features.vehicledesign.GroundClearanceBuilder: Returns the expression that contains the value which indicates the distance from general surface to road general.
distanceToRoadUnderAxle() - Method in interface nxopen.features.vehicledesign.GroundClearanceBuilder: Returns the expression that contains the value which indicates the distance from the under axle surface to road.
distanceType() - Method in interface nxopen.cam.BoundaryTurnMemberOffset: Returns the offset distance type (general and legacy)
License requirements: None.
distanceType() - Method in interface nxopen.features.ExtensionBuilder: Returns the distance type
License requirements: None.
distanceUnit() - Method in interface nxopen.cam.ReliefCut: Returns the relief cut distance unit
License requirements: None.
distanceValue() - Method in interface nxopen.features.ResizeChamferCurveBuilder: Returns the distance value
License requirements: None.
distanceValue() - Method in interface nxopen.geometricutilities.ModlMotion: Returns the distance value of ModlMotion.Options.DISTANCE motion option.
distanceVector() - Method in interface nxopen.geometricutilities.ModlMotion: Returns the direction of ModlMotion.Options.DISTANCE motion option.
distanceX() - Method in interface nxopen.tooling.QuickQuotationBuilder: Returns the distance between sub die base and die base edge in X direction.
distanceX - Variable in class nxopen.uf.UFModlGeneral.AskLinearIsetParmsData
distanceY() - Method in interface nxopen.tooling.QuickQuotationBuilder: Returns the distance between sub die base and die base edge in Y direction.
distanceY - Variable in class nxopen.uf.UFModlGeneral.AskLinearIsetParmsData
DISTANT - Static variable in class nxopen.LightType: A distant light can be thought of as being located for all practical purposes infinitely far away, such as the sun.
DISTANT_LIGHT - Static variable in class nxopen.uf.UFView.LightType
distFromEnd - Variable in class nxopen.uf.UFNxsm.FlangeSketchData
distFromLeftEnd - Variable in class nxopen.uf.UFNxsm.FlangeSketchData
distFromRightEnd - Variable in class nxopen.uf.UFNxsm.FlangeSketchData
disToolEndProj() - Method in interface nxopen.cam.DmBndBuilder: Returns the Display Tool End Projection
License requirements: None.
distortion - Variable in class nxopen.uf.UFModl.GflangeOptionsData
distortionConstraint - Variable in class nxopen.uf.UFSmd.FpPrefs
DistributeAnnotationsBuilder - Interface in nxopen.drafting: This class is used to distribute annotations associated to a view.
DISTRIBUTED_LOAD - Static variable in class nxopen.cae.responsesimulation.Excitation.Component
DISTRIBUTED_LOAD - Static variable in class nxopen.cae.responsesimulation.ExcitationBuilder.ExcitationLocationType
DISTRIBUTED_MASS_PER_AREA - Static variable in class nxopen.cae.Result.Quantity
DISTRIBUTED_MASS_PER_LENGTH - Static variable in class nxopen.cae.Result.Quantity
DistributedLoadExcitation - Interface in nxopen.cae.responsesimulation: Represents an excitation of distributed-load type
To create or edit an instance of this class, use DistributedLoadExcitationBuilder

Created in NX5.0.0
DistributedLoadExcitationBuilder - Interface in nxopen.cae.responsesimulation: Represents the manager to DistributedLoadExcitation .
distributeExcessLight - Variable in class nxopen.uf.UFDisp.ShadeOptions
distributeType - Variable in class nxopen.optimization.DesignStudyBuilder.DesignStudyVariable: Distribute type
distTol() - Method in interface nxopen.features.WrapGeometryBuilder: Returns the Distance tolerance used to facet the solids.
distTol - Variable in class nxopen.uf.UFCurve.OcfData
distTol - Variable in class nxopen.uf.UFModl.StycornerData
distTol - Variable in class nxopen.uf.UFModl.WrapAssem
distTol - Variable in class nxopen.uf.UFModl.WrapGeom
distTol - Variable in class nxopen.uf.UFModlFeatures.AskTaperFromEdgesData
distTolerance() - Method in interface nxopen.cae.MMCCreateBuilder: Returns the dist tolerance
License requirements: None.
distTolerance() - Method in interface nxopen.weld.FilletBuilder: Returns the distance tolerance.
distValueDisplayFlag() - Method in interface nxopen.cae.SimBCDisplay: Returns the true/false flag based on whether the distributed value of the BC is displayed in the graphics window
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
DIVIDE - Static variable in class nxopen.cae.AfuMathOperation.MultiType: Divides AFU records
DIVIDE - Static variable in class nxopen.cam.RoughTurningBuilder.PartOffDepthModeTypes: Part Off Depth Mode: Divide
DivideCurveBuilder - Interface in nxopen.features: Represents a builder for non-associative divide curve operation.
DivideCurveBuilder.CornerOption - Class in nxopen.features: Represents the Divide Curve at Corner option types
DivideCurveBuilder.EqualSegmentOption - Class in nxopen.features: Represents the Divide Curve equal segment method types
DivideCurveBuilder.InputArcLengthDirectionFlag - Class in nxopen.features: Represents the Divide Curve Input Arc length direction flag
DivideCurveBuilder.KnotPointOption - Class in nxopen.features: Represents the Divide Curve at Knot option types
DivideCurveBuilder.Types - Class in nxopen.features: Represents the Divide Curve types
DIVIDED_CIRCLE - Static variable in class nxopen.annotations.IdSymbolBuilder.SymbolTypes: Divided circle
DIVIDED_CIRCLE - Static variable in class nxopen.annotations.PartsListBuilder.PartsListSymbolType
DIVIDED_HEXAGON - Static variable in class nxopen.annotations.IdSymbolBuilder.SymbolTypes: Divided hexagon
DIVIDED_HEXAGON - Static variable in class nxopen.annotations.PartsListBuilder.PartsListSymbolType
DIVIDED_SQUARE - Static variable in class nxopen.annotations.IdSymbolBuilder.SymbolTypes: Divided square
DIVIDED_SQUARE - Static variable in class nxopen.annotations.PartsListBuilder.PartsListSymbolType
Divideface - Interface in nxopen.features: Represents a Divideface feature.
DividefaceBuilder - Interface in nxopen.features: Represents a divide face builder
To create a new instance of this class, use FeatureCollection.createDividefaceBuilder(Feature)
Default values.
dividePlane() - Method in interface nxopen.cam.SplitSubopCommand: Returns the divide plane
License requirements: None.
divideSurface() - Method in interface nxopen.features.SnipSurfaceBuilder: Returns a value indicating whether to divide the surface
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
divideToolPaths(CAMObject[], ToolPathDivideBuilder) - Method in interface nxopen.cam.CAMSetup: Tool Path Divide
License requirements: cam_base ("CAM BASE")
.
divideType() - Method in interface nxopen.cam.ToolPathDivideBuilder: Returns the divide limit type
License requirements: None.
dividingCurve() - Method in interface nxopen.features.DivideCurveBuilder: Returns the select dividing curve
License requirements: None.
dividingCurves() - Method in interface nxopen.features.PatchOpeningsBuilder: Returns the curves used to divide the opening.
dividingObjectsList() - Method in interface nxopen.features.DividefaceBuilder: Deprecated.
Deprecated in NX9.0.0. This is for pre NX9 usage, do not use this method. Instead use DividefaceBuilder.selectDividingObject() instead.
dividingObjectsList() - Method in interface nxopen.geometricutilities.SelectDividingObjectBuilder: Returns the dividing objects list
License requirements: None.
division() - Method in interface nxopen.annotations.EnterpriseIdentificationBuilder: Returns the division
License requirements: None.
Division - Interface in nxopen.routing: Represents Division
Creator not available in KF because transient objects are not supported.
Division.SplitDirectionType - Class in nxopen.routing: The direction in which the cross-section is to be split
divisions() - Method in interface nxopen.die.SpringbackCompensationBuilder: Returns the number of equi-distant points to divide the cube of the sheet body (N x N x N).
divisions() - Method in interface nxopen.features.MoveObjectBuilder: Returns the distance or angle divisions
License requirements: None.
DivisionsBuilder - Interface in nxopen.routing: Represents a DivisionsBuilder Builder for creating/editing splits at an end of a duct.
DivisionsBuilder.SplitDirectionType - Class in nxopen.routing: The direction in which the cross-section is to be split
divisionsList() - Method in interface nxopen.routing.SplitDuctBuilder: Returns the divisions list
License requirements: routing_hvac ("Routing HVAC")
.
divObjects() - Method in interface nxopen.tooling.FaceSplitBuilder: Returns the dividing objects which will be different according to the split type
License requirements: None.
DmAmBuilder - Interface in nxopen.cam: Represents a Area Milling Drive Method Builder .
DmAmBuilder.AmCustomStartTypes - Class in nxopen.cam: Available types for in FASurfaceContour
DmAmBuilder.AmCutPatternTypes - Class in nxopen.cam: Available types for Area Milling cut pattern in FASurfaceContour
DmAmBuilder.AmCutTraversalTypes - Class in nxopen.cam: Available types for Area Milling cut traversal in FASurfaceContour
DmAmBuilder.AmPocketDirTypes - Class in nxopen.cam: Available types for Area Milling Pocketing Direction in FASurfaceContour
DmAmBuilder.AutoPatCenterTypes - Class in nxopen.cam: Available types for area milling Auto Pattern Center
DmAmBuilder.SteepOptTypes - Class in nxopen.cam: Available types for area milling Steep Option
dmAmRegionCon() - Method in interface nxopen.cam.DmAmBuilder: Returns the Region Connection
License requirements: None.
dmareaMillingBuilder() - Method in interface nxopen.cam.SurfaceContourBuilder: Returns the Area Milling Drive Method builder
License requirements: None.
DmBndBuilder - Interface in nxopen.cam: Represents a Boundary Drive Method Builder .
DmBndBuilder.ApplyFilletAtTypes - Class in nxopen.cam: Available types for boundary Corner Control Option
DmBndBuilder.BndCustomStartTypes - Class in nxopen.cam: Available types for in FASurfaceContour
DmBndBuilder.BndCutPatternTypes - Class in nxopen.cam: Available types for Boundary cut pattern in FASurfaceContour
DmBndBuilder.BndCutTraversalTypes - Class in nxopen.cam: Available types for Boundary cut traversal in FASurfaceContour
DmBndBuilder.BndPatternCenterTypes - Class in nxopen.cam: Available types for Boundary Pattern Center in FASurfaceContour
DmBndBuilder.BndPocketDirTypes - Class in nxopen.cam: Available types for Boundary Pocketing Direction in FASurfaceContour
DmBndBuilder.UsePartTypes - Class in nxopen.cam: Available types for boundary use part cantainment Option
dmBndStock() - Method in interface nxopen.cam.DmBndBuilder: Returns the Boundary Stock
License requirements: None.
dmboundaryBuilder() - Method in interface nxopen.cam.SurfaceContourBuilder: Returns the Boundary Drive Method builder
License requirements: None.
DmCmBuilder - Interface in nxopen.cam: Represents a DmCmBuilder .
dmCmBuilder() - Method in interface nxopen.cam.SurfaceContourBuilder: Returns the Contour Profile Drive Method builder
License requirements: None.
DmCmBuilder.ContactPositionRingHeightType - Class in nxopen.cam: Available types for contact position ring height
DmCmBuilder.DmCmCutPointType - Class in nxopen.cam: Available types for point type, Contour Milling Drive
DmCmBuilder.ExtDisType - Class in nxopen.cam: Available types for ext_dis, Contour Milling Drive: Start of Cut
DmCmBuilder.ToolAxisGuideVectorType - Class in nxopen.cam: Available types for vector type, Contour Milling Drive
dmCmEndCutDisType() - Method in interface nxopen.cam.DmCmBuilder: Deprecated.
Deprecated in NX8.5.0. Use CAM.DmCmBuilder#endExtDistSpecValueBuilder instead.
dmCmEndCutExtend() - Method in interface nxopen.cam.DmCmBuilder: Deprecated.
Deprecated in NX8.5.0. Use CAM.DmCmBuilder#endExtDistSpecValueBuilder instead.
dmCmEndCutRadio() - Method in interface nxopen.cam.DmCmBuilder: Returns the custom/auto, Contour Milling Drive: End of Cut
License requirements: None.
dmCmEndCutToolAxisGuideVector() - Method in interface nxopen.cam.DmCmBuilder: Returns the end tool side vector, Contour Milling Drive: End of Cut
License requirements: None.
dmCmFloorWallStockFloorBuilder() - Method in interface nxopen.cam.DmCmBuilder: Returns the Floor Stock builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
dmCmFloorWallStockSame() - Method in interface nxopen.cam.DmCmBuilder: Returns the Contour Profile Drive: Floor Stock / Wall Stock
License requirements: None.
dmCmFloorWallStockWallBuilder() - Method in interface nxopen.cam.DmCmBuilder: Returns the Wall Stock builder (inheritable double)
License requirements: None.
dmCmMultiplePassesBuilder() - Method in interface nxopen.cam.DmCmBuilder: Returns the Multiple Passes builder
License requirements: None.
DmCmMultiplePassesCiBuilder - Interface in nxopen.cam: Represents a DmCmMultiplePassesCiBuilder
To obtain an instance of this class use CAM.DmCmBuilder#dmCmMultiplePassesBuilder

Created in NX5.0.0
DmCmMultiplePassesCiBuilder.OrderType - Class in nxopen.cam: Available types for Order
DmCmMultiplePassesCiBuilder.WallStepMethodType - Class in nxopen.cam: Available types for Wall Step Method
dmCmStartCutDisType() - Method in interface nxopen.cam.DmCmBuilder: Deprecated.
Deprecated in NX8.5.0. Use CAM.DmCmBuilder#startExtDistSpecValueBuilder instead.
dmCmStartCutExtend() - Method in interface nxopen.cam.DmCmBuilder: Deprecated.
Deprecated in NX8.5.0. Use CAM.DmCmBuilder#startExtDistSpecValueBuilder instead.
dmCmStartCutRadio() - Method in interface nxopen.cam.DmCmBuilder: Returns the custom/auto, Contour Milling Drive: Start of Cut
License requirements: None.
dmCmStartCutToolAxisGuideVector() - Method in interface nxopen.cam.DmCmBuilder: Returns the start tool side vector, Contour Milling Drive: Start of Cut
License requirements: None.
DmCurveBuilder - Interface in nxopen.cam: Represents a Curve Drive Method Builder .
dmcurveBuilder() - Method in interface nxopen.cam.SurfaceContourBuilder: Returns the Curve Drive Method builder
License requirements: None.
DmCurveBuilder.DpmcvStepTypes - Class in nxopen.cam: Available types for Cure Drive Cut Step
DME - Static variable in class nxopen.tooling.DieBaseBuilder.CatalogOpt: catalog for DME
DML - Static variable in class nxopen.cam.InspectionMeasDataBuilder.InputFormatType: Dimensional Markup Language
dmlExtension() - Method in interface nxopen.cam.InspectionAnalyzeOutputBuilder: Returns the extension to use for dml format files
License requirements: None.
dmlPcs() - Method in interface nxopen.cam.InspectionAnalyzeOutputBuilder: Returns the PCS to use for DML output
License requirements: None.
DmRadBuilder - Interface in nxopen.cam: Represents a DmRadBuilder Builder .
dmradBuilder() - Method in interface nxopen.cam.SurfaceContourBuilder: Returns the Radial Cut Drive Method builder
License requirements: None.
DmRadBuilder.RadCutMethodType - Class in nxopen.cam: Available types for Radial Cut/Cut Method in scop
DmRadBuilder.RadStepoverTypeType - Class in nxopen.cam: Available types for Stepover for the Radial Cut in scop.
DmRadBuilder.RadTraverseDirType - Class in nxopen.cam: Available types for Radial Cut/ Traverse Direction
DmRotaryFloorFinishBuilder - Interface in nxopen.cam: represent rotary floor finish builder .
DmRotaryFloorFinishBuilder.CutDirection - Class in nxopen.cam: the types for start cut direction
DmRotaryFloorFinishBuilder.CutDirType - Class in nxopen.cam: the types for cut direction
DmRotaryFloorFinishBuilder.DirectionType - Class in nxopen.cam: the types for direction
DmRotaryFloorFinishBuilder.DmSurfCutAreaType - Class in nxopen.cam: the types for cut area
DmRotaryFloorFinishBuilder.DmSurfCutStepTypes - Class in nxopen.cam: the types for Cut Step
DmRotaryFloorFinishBuilder.GougeActionTypes - Class in nxopen.cam: the gouge action types for Rotary Floor Finish method/Gouge Check in scop
DmRotaryFloorFinishBuilder.MatSideType - Class in nxopen.cam: the types for flip material
DmSpiralBuilder - Interface in nxopen.cam: Represents a Spiral Drive Method Builder
This is an abstract class and cannot be instantiated.
dmSpiralBuilder() - Method in interface nxopen.cam.SurfaceContourBuilder: Returns the Spiral Drive Method builder
License requirements: None.
DmSpiralBuilder.DmSpiralStepoverTypes - Class in nxopen.cam: Available types for Spiral drive method stepover in SurfaceContour.
dmSpiralStepoverMenu() - Method in interface nxopen.cam.DmSpiralBuilder: Returns the Spiral Drive Method Stepover type.
DmSurfBuilder - Interface in nxopen.cam: Represents a DmSurfBuilder .
dmSurfBuilder() - Method in interface nxopen.cam.SurfaceContourBuilder: Returns the Surface Area Drive Method builder
License requirements: None.
DmSurfBuilder.CutDirection - Class in nxopen.cam: Available types for Cut Direction
DmSurfBuilder.DmSurfCutAreaType - Class in nxopen.cam: Available types for SDM: Cut Area
DmSurfBuilder.DmSurfCutPatternType - Class in nxopen.cam: SDM: Cut Method in scop, cut pattern
DmSurfBuilder.DmSurfCutStepType - Class in nxopen.cam: Available types for SDM: Cut Step
DmSurfBuilder.DmSurfCutTraversalType - Class in nxopen.cam: SDM: Cut Method in scop, cut traversal
DmSurfBuilder.GougeActionType - Class in nxopen.cam: Surface Drive method/Gouge Check in scop
DmSurfBuilder.MatSideType - Class in nxopen.cam: Available types for Flip Material, SDM: Select Cut Direction
DmSurfBuilder.ToolPositionType - Class in nxopen.cam: Available types for SDM: Tool Position Type
dmSurfCutArea() - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder: Returns the cut area
License requirements: None.
dmSurfCutArea() - Method in interface nxopen.cam.DmSurfBuilder: Returns the SDM: Cut Arear
License requirements: None.
dmSurfCutPattern() - Method in interface nxopen.cam.DmSurfBuilder: Returns the Pattern SDM: Cut Method
License requirements: None.
dmSurfCutStep() - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder: Returns the cut step
License requirements: None.
dmSurfCutStep() - Method in interface nxopen.cam.DmSurfBuilder: Returns the SDM: Cut Step
License requirements: None.
dmSurfCutStepFirstCut() - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder: Returns the first cut of cut step
License requirements: None.
dmSurfCutStepFirstCut() - Method in interface nxopen.cam.DmSurfBuilder: Returns the First Cut, SDM: Cut Step
License requirements: None.
dmSurfCutStepSecondCut() - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder: Returns the second cut of cut step
License requirements: None.
dmSurfCutStepSecondCut() - Method in interface nxopen.cam.DmSurfBuilder: Returns the Second Cut, SDM: Cut Step
License requirements: None.
dmSurfCutStepThirdCut() - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder: Returns the third cut of cut step
License requirements: None.
dmSurfCutStepThirdCut() - Method in interface nxopen.cam.DmSurfBuilder: Returns the Third Cut, SDM: Cut Step
License requirements: None.
dmSurfCutTraversal() - Method in interface nxopen.cam.DmSurfBuilder: Returns the Cut Type SDM: Cut Method
License requirements: None.
dmSurfGouge() - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder: Returns the gouge action
License requirements: None.
dmSurfGouge() - Method in interface nxopen.cam.DmSurfBuilder: Returns the Surface Drive method/Gouge Check
License requirements: None.
dmSurfToolPos() - Method in interface nxopen.cam.DmSurfBuilder: Returns the SDM: Tool Position
License requirements: None.
DmTpBuilder - Interface in nxopen.cam: Represents a tool path Drive Method Builder
This is an abstract class and cannot be instantiated.
dmtpBuilder() - Method in interface nxopen.cam.SurfaceContourBuilder: Returns the Tool Path Drive Method builder
License requirements: None.
dmUserExitCi() - Method in interface nxopen.cam.DmUserExitCiBuilder: Returns the Project Type
License requirements: None.
DmUserExitCiBuilder - Interface in nxopen.cam: Represents a exit name ci Builder .
DN - Static variable in class nxopen.features.shipdesign.SectionViewBuilder.DirectionOptions
DO_DELETE - Static variable in class nxopen.routing.DesignRuleViolationLocationCollection.DeleteOption
DO_NOT_CHECK - Static variable in class nxopen.cae.SimSolution.SetupCheckOption: do perform any set up checks
DO_NOT_DISPLAY - Static variable in class nxopen.validate.ValidatorOptions.ResultsDisplayModeTypes: Do not display results
DO_NOT_EXTEND_AND_EXTEND_TRIM_FACE - Static variable in class nxopen.uf.UFModl.SweepTrimOpts
DO_NOT_EXTEND_TRIM_FACE - Static variable in class nxopen.uf.UFModl.SweepTrimOpts
DO_NOT_NOTIFY - Static variable in class nxopen.preferences.PartDrafting.UpdateViewWithoutLwDataOption: Do Not Notify
DO_NOT_REPORT - Static variable in class nxopen.routing.ReuseLibrary.ReportInBom: Do not report in the Bill of Materials
DO_NOT_SAVE - Static variable in class nxopen.validate.RequirementCheck.SaveResultsToTeamcenterOptions: Do not perform save.
DO_NOT_SAVE - Static variable in class nxopen.validate.ValidatorOptions.SaveModeTypes: Do not perform save.
DO_NOT_TRIM - Static variable in class nxopen.annotations.TrimDimensionLineStyle: Dimension line will not be trimmed when text crosses both extension lines
DO_NOT_TRIM_BLEND_FACES - Static variable in class nxopen.features.AestheticFaceBlendBuilder.BlendFacesType: This option controls to trim blend faces or not
doAppendMerge() - Method in interface nxopen.cae.SolverAppendOption: Deprecated.
Deprecated in NX9.0.0. Use SolverAppendOption.importBehavior() instead.
doAssemblyConstraintsUpdate(int) - Method in interface nxopen.Update: Performs an assembly constraints update.
doAssemblyConstraintsUpdateInPart(Part, int) - Method in interface nxopen.Update: Performs an assembly constraints update.
doAveraging - Variable in class nxopen.cae.Result.Averaging
doCheck() - Method in interface nxopen.cae.modelcheck.ElementMaterialOrientationCheckBuilder: Calculates material orientation vector for input elements and returns the orientation vector result
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
doCheck() - Method in interface nxopen.cae.modelcheck.FaceClearanceCheckBuilder: Perform the clearance check.
DoCheckData() - Constructor for class nxopen.cae.modelcheck.ElementMaterialOrientationCheckBuilder.DoCheckData
doCleanup() - Method in interface nxopen.PartCleanup: Actually performs the part cleanup operation according to the properties set on this object
License requirements: None.
doClearanceAnalysis(Tag) - Method in interface nxopen.uf.UFClear: Deprecated.
The equivalent Open C method has retired
doCollisionAvoidance() - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder: Updates selected paths.
doCoplanarDecimation() - Method in interface nxopen.cae.FluidDomainBuilder: Returns the decimation flag
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")
.
doDepthPasses() - Method in interface nxopen.cam.MultiplePassesBuilder: Returns the Do Depth Passes
License requirements: cam_base ("CAM BASE")
.
doElementValue - Variable in class nxopen.cae.Result.ElementValue
DOES_NOT_CONTAIN_OPERATOR - Static variable in class nxopen.visualreporting.Condition.OperatorOption
doesFontExist(int) - Method in interface nxopen.FontCollection: Finds out whether the specified ID is associated with a font
License requirements: None.
doesObjectHaveAttributes(NXObject) - Method in interface nxopen.weld.CharacteristicsBuilder: Copy the attributes that are on the object to the selection and returns a flag indicating whether the object actually has attributes.
doesUndoMarkExist(int, String) - Method in interface nxopen.Session: Returns true if the specified mark exists
License requirements: None.
dof1 - Variable in class nxopen.cae.optimization.TBSCheckDOF.DofSettings: Represents displacement in the X axial direction
dof2 - Variable in class nxopen.cae.optimization.TBSCheckDOF.DofSettings: Represents displacement in the Y axial direction
dof3 - Variable in class nxopen.cae.optimization.TBSCheckDOF.DofSettings: Represents displacement in the Z axial direction
dofcolor() - Method in interface nxopen.preferences.PartSketch: Returns the sketch degree of freedom arrow color
License requirements: None.
dofdisplay() - Method in interface nxopen.Sketch: Returns a flag indicating whether the degree of freedom arrows are currently being displayed
License requirements: None.
dofDisplayFlag() - Method in interface nxopen.cae.SimBCDisplay: Returns the true/false flag based on whether the dof of the BC is displayed in the graphics window
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
doFitOnHideOrShow() - Method in interface nxopen.preferences.SessionVisualizationScreen: Returns the option to specify whether a Fit should be done when a Hide or Show is performed.
dofNeeded - Variable in class nxopen.Sketch.StatusData: The number of degrees of freedom left in the sketch
dofNeeded - Variable in class nxopen.uf.UFSket.AskSketchStatusData
dofs() - Method in interface nxopen.cae.optimization.TBSCheckDOF: Returns the displacement restriction settings on referenced coordinate system
License requirements: None.
dofSets() - Method in interface nxopen.cae.PreTestExciterSelectionControl: The candidate and required DOFs .
dofSets() - Method in interface nxopen.cae.PreTestSensorSelectionControl: The candidate and required DOFs .
dofSetSelect() - Method in interface nxopen.cae.PreTestDofSetBuilder: Returns the referrenced CaeDOFSet
License requirements: nx_correl_base ("FE Correlation")

Created in NX7.5.0
DofSettings() - Constructor for class nxopen.cae.optimization.TBSCheckDOF.DofSettings
DofSettings(TBSCheckDOF.CheckDofOption, TBSCheckDOF.CheckDofOption, TBSCheckDOF.CheckDofOption) - Constructor for class nxopen.cae.optimization.TBSCheckDOF.DofSettings: Constructor for the DofSettings object.
dofSettings() - Method in interface nxopen.cae.optimization.TBSShapeRestrictAreaBuilder: Returns the DOF settings
License requirements: None.
doglegAngle() - Method in interface nxopen.annotations.OrdinateDimensionPreferences: Returns the dogleg angle
License requirements: None.
doglegAngle() - Method in interface nxopen.annotations.OrdinateStyleBuilder: Returns the dogleg angle.
doglegAngle - Variable in class nxopen.uf.UFDrf.DoglegInfo
doglegCreationOption() - Method in interface nxopen.annotations.OrdinateDimensionPreferences: Returns the dogleg creation option
License requirements: None.
doglegCreationOption() - Method in interface nxopen.annotations.OrdinateStyleBuilder: Returns the dogleg creation option
License requirements: None.
doglegDefinition() - Method in interface nxopen.annotations.OrdinateDimensionPreferences: Returns the dogleg definition
License requirements: None.
doglegDistance - Variable in class nxopen.uf.UFDrf.DoglegInfo
doglegEndOffset() - Method in interface nxopen.annotations.OrdinateDimensionPreferences: Returns the dogleg end offset
License requirements: None.
doglegEndOffset() - Method in interface nxopen.annotations.OrdinateStyleBuilder: Returns the dogleg end offset.
DoglegInfo() - Constructor for class nxopen.uf.UFDrf.DoglegInfo
DoglegInfo(UFDrf.DoglegType, double, double) - Constructor for class nxopen.uf.UFDrf.DoglegInfo
doglegOption - Variable in class nxopen.annotations.OrdinateDimension.DoglegPreferences
DoglegPreferences() - Constructor for class nxopen.annotations.OrdinateDimension.DoglegPreferences
DoglegPreferences(OrdinateDoglegDefinition, double, double, double, OrdinateDoglegCreationOption) - Constructor for class nxopen.annotations.OrdinateDimension.DoglegPreferences: Constructor for the DoglegPreferences object.
doglegSetting - Variable in class nxopen.annotations.OrdinateDimension.DoglegPreferences
doglegSetting() - Method in interface nxopen.annotations.OrdinateStyleBuilder: Returns the dogleg setting.
doglegStartOffset() - Method in interface nxopen.annotations.OrdinateDimensionPreferences: Returns the dogleg start offset
License requirements: None.
doglegStartOffset() - Method in interface nxopen.annotations.OrdinateStyleBuilder: Returns the dogleg start offset.
doglegType - Variable in class nxopen.uf.UFDrf.DoglegInfo
doInterpartUpdate(int) - Method in interface nxopen.Update: Performs an interpart update.
doKfUpdate(int) - Method in interface nxopen.RuleManager: Performs an KF update.
DOLLOP - Static variable in class nxopen.uf.UFConstants
DOLLOP - Static variable in class nxopen.weld.PointMarkBuilder.WeldTypes: Dollop
DOLLOP - Static variable in class nxopen.weld.WeldAdvisorCustomerDefault: Dollop
DOLLOP - Static variable in class nxopen.weld.WeldFeatureSetType: Dollop
DOLLOP_FEATURE - Static variable in class nxopen.uf.UFConstants
DOLLOP_FEATURE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
DOLLOP_NA_TYPE - Static variable in class nxopen.uf.UFWeld.Types
DOLLOP_NON_ASSOCIATIVE - Static variable in class nxopen.uf.UFConstants
DOLLOP_TYPE - Static variable in class nxopen.uf.UFWeld.Types
DOLLOP_WELD - Static variable in class nxopen.uf.UFConstants
DOLLOP_WELD_NON_ASSOCIATIVE - Static variable in class nxopen.uf.UFConstants
domains() - Method in interface nxopen.fields.FieldManager: Returns a collection of Units .
domeImage() - Method in interface nxopen.display.Background: Returns the dome background's image builder
License requirements: None.
domeImageFilename() - Method in interface nxopen.display.Background: Returns the background's dome image filename
License requirements: None.
domeOrigin() - Method in interface nxopen.display.Background: Returns the origin
License requirements: None.
domeSize() - Method in interface nxopen.display.Background: Returns the dome size
License requirements: None.
DONT_ALLOW_SAVE - Static variable in class nxopen.features.PartModule.PartLoadOption: Sets the loaded part as read only.
DONT_CLOSE_MODIFIED - Static variable in class nxopen.BasePart.CloseModified: Do not close any modified parts
DONT_COPY_ANNOTATION - Static variable in class nxopen.drawings.DraftingViewCollection.ViewCopyAnnotOption: don't copy annotation
DONT_CREATE - Static variable in class nxopen.cae.SolverAppendOption.SolutionOption
DONT_DELETE - Static variable in class nxopen.routing.DesignRuleViolationLocationCollection.DeleteOption: Set this option only if you do not want to delete violation location objects
DONT_IMPORT - Static variable in class nxopen.LoadOptions.BookmarkRefsets: Do nothing with the bookmark reference set data
DONT_REPLACE - Static variable in class nxopen.ExpressionCollection.ImportMode: Don't overwrite existing expressions.
DONT_SEARCH - Static variable in class nxopen.routing.ControlPointCollection.CheckExisting: Don't search for an exising object, always create a new object.
DONT_SHARE - Static variable in class nxopen.preferences.SessionModeling.ShareGeometriesOnSaveType
DONT_TRIM_DIM_LINE - Static variable in class nxopen.uf.UFDrf.TrimDimLineStyle
DONT_UPDATE - Static variable in class nxopen.SmartObject.UpdateOption: No update occurs.
DONT_UPDATE - Static variable in class nxopen.uf.UFSo.UpdateOption
doorOpeningLeft() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarWizardBuilder: Returns the left forward door opening geometry.
doorOpeningLeft() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarWizardBuilder: Returns the left forward door opening geometry.
doorOpeningLeft() - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailWizardBuilder: Returns the left forward door opening geometry.
doorOpeningLeft() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailWizardBuilder: Returns the left forward door opening geometry.
doorOpeningRight() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarWizardBuilder: Returns the right forward door opening geometry.
doorOpeningRight() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarWizardBuilder: Returns the right forward door opening geometry.
doorOpeningRight() - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailWizardBuilder: Returns the right forward door opening geometry.
doorOpeningRight() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailWizardBuilder: Returns the right forward door opening geometry.
doorTopLeft() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder: Returns the left Door Top additional geometry.
doorTopLeft() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarWizardBuilder: Returns the left door opening top point.
doorTopLeft() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder: Returns the left Door Top additional geometry.
doorTopLeft() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarWizardBuilder: Returns the left door opening top point.
doorTopLeftFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder: Returns the left Door Top additional geometry flag.
doorTopLeftFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder: Returns the left Door Top additional geometry flag.
doorTopRight() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder: Returns the right Door Top additional geometry.
doorTopRight() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarWizardBuilder: Returns the right door opening top point.
doorTopRight() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder: Returns the right Door Top additional geometry.
doorTopRight() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarWizardBuilder: Returns the right door opening top point.
doorTopRightFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder: Returns the right Door Top additional geometry flag.
doorTopRightFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder: Returns the right Door Top additional geometry flag.
doPaste() - Method in interface nxopen.features.CopyFaceBuilder: Returns the do paste option defines whether paste the copied faces to a target body.
doPaste() - Method in interface nxopen.features.CutFaceBuilder: Returns the do paste option defines whether paste the cut faces to a target body.
doReplace() - Method in interface nxopen.sim.SinumerikCaSimplifyBodiesBuilder: Replace the simplify bodies
License requirements: nx_isv_mtb ("Machine Tool Builder") OR nx_sinumerik_ca ("Sinumerik Collision Avoidance")
.
doSharpFeatureEdge() - Method in interface nxopen.cae.FluidDomainBuilder: Returns the edge snapping flag
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")
.
doSharpFeaturePlaneIntersection() - Method in interface nxopen.cae.FluidDomainBuilder: Returns the plane intersection detection flag
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")
.
doSidePasses() - Method in interface nxopen.cam.MultiplePassesBuilder: Returns the Do Side Passes
License requirements: None.
DOT - Static variable in class nxopen.annotations.LeaderData.ArrowheadType: Dot symbol
DOT - Static variable in class nxopen.cae.MarkerType0d
DOT - Static variable in class nxopen.cae.ModelDisplayBuilder.FreeEdgeMarker: Dot marker
DOT - Static variable in class nxopen.cae.ModelDisplayBuilder.NodeMarkerType: Dot
DOT - Static variable in class nxopen.cae.ModelDisplayBuilder.NodeUnattachedMarkerType: Dot
DOT - Static variable in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeMarker: Dot marker
DOT - Static variable in class nxopen.cae.xyplot.PointMarker: Dot marker
DOT - Static variable in class nxopen.uf.UFDisp.PolyMarker
dot(double[], double[]) - Method in interface nxopen.uf.UFVec2: Refer to UF_VEC2_dot for documentation.
dot(double[], double[]) - Method in interface nxopen.uf.UFVec3: Refer to UF_VEC3_dot for documentation.
DOT - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
DOT_ARROW - Static variable in class nxopen.annotations.ArrowheadType
DOT_ARROW - Static variable in class nxopen.uf.UFDrf.ArrowheadAndFillType
DOT_TERMINATED - Static variable in class nxopen.annotations.LeaderData.LeaderType: Datum feature on stub of dot terminated style
dotArrowheadDiameter() - Method in interface nxopen.annotations.LineAndArrowPreferences: Returns the dot arrowhead diameter
License requirements: None.
dotArrowheadDiameter() - Method in interface nxopen.annotations.LineArrowStyleBuilder: Returns the dot arrowhead diameter
License requirements: None.
dotArrowheadDiameter - Variable in class nxopen.uf.UFDrf.LineArrowPreferences
DOTDASH - Static variable in class nxopen.assemblies.ProductOutlineBuilder.LineFont: Dotdash Line
DOTDASH - Static variable in class nxopen.display.GridBuilder.LineStyleType
dotDiameter - Variable in class nxopen.uf.UFGdt.LeaderSpec
doTest() - Method in interface nxopen.cae.modelcheck.ITestValue: Returns an option value indicating whether to do element quality check for this test
License requirements: None.
doTrimWithoutCopy() - Method in interface nxopen.features.shipdesign.SplitProfilePlateBuilder: Returns the option to determine if target bodies will be copied.
dotsPerInch - Variable in class nxopen.preferences.SessionVisualizationHighQualityImage.ResolutionData: Dots per inch.
DOTTED - Static variable in class nxopen.annotations.EditSymbolDisplayBuilder.FontTypes: Dotted Type
DOTTED - Static variable in class nxopen.assemblies.ProductOutlineBuilder.LineFont: Dotted Line
DOTTED - Static variable in class nxopen.cae.ModelDisplayBuilder.FreeEdgeFont: Dotted font
DOTTED - Static variable in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeFont: Dotted font
DOTTED - Static variable in class nxopen.display.GridBuilder.LineStyleType
DOTTED - Static variable in class nxopen.DisplayableObject.ObjectFont
DOTTED - Static variable in class nxopen.drawings.CustomViewSettingsBuilder.Font: Dotted
DOTTED - Static variable in class nxopen.drawings.DrawingCompareSettingsBuilder.FontType
DOTTED - Static variable in class nxopen.drawings.SectionLineStyleBuilder.FontStyle: Deprecated.
DOTTED - Static variable in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Font: Dotted Font.
DOTTED - Static variable in class nxopen.fields.DisplayPropertiesBuilder.LineFontEnum: Dotted
DOTTED - Static variable in class nxopen.LineFontBuilder.LineFontType: Dotted line font
DOTTED - Static variable in class nxopen.preferences.Font: Dotted
DOTTED - Static variable in class nxopen.preferences.PartDrafting.FontType: Dotted
DOTTED - Static variable in class nxopen.preferences.PartModeling.GridKnotLineFontType
DOTTED - Static variable in class nxopen.preferences.PartObject.LineFontType: Dotted
DOTTED - Static variable in class nxopen.preferences.SessionModeling.PolylineStyleType
DOTTED - Static variable in class nxopen.preferences.ViewVisualizationVisual.SmoothEdgeFont
DOTTED - Static variable in class nxopen.ViewDependentDisplayManager.Font
DOTTED_DASH - Static variable in class nxopen.drawings.DrawingCompareSettingsBuilder.FontType
DOTTED_DASHED - Static variable in class nxopen.annotations.EditSymbolDisplayBuilder.FontTypes: Dotted Dash
DOTTED_DASHED - Static variable in class nxopen.cae.ModelDisplayBuilder.FreeEdgeFont: Dotted dashed font
DOTTED_DASHED - Static variable in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeFont: Dotted dashed font
DOTTED_DASHED - Static variable in class nxopen.DisplayableObject.ObjectFont
DOTTED_DASHED - Static variable in class nxopen.drawings.CustomViewSettingsBuilder.Font: Dotted Dashed
DOTTED_DASHED - Static variable in class nxopen.drawings.SectionLineStyleBuilder.FontStyle: Deprecated.
DOTTED_DASHED - Static variable in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Font: DottedDashed Font.
DOTTED_DASHED - Static variable in class nxopen.fields.DisplayPropertiesBuilder.LineFontEnum
DOTTED_DASHED - Static variable in class nxopen.LineFontBuilder.LineFontType: Dotted Dashed line font
DOTTED_DASHED - Static variable in class nxopen.preferences.Font: Dotted Dashed
DOTTED_DASHED - Static variable in class nxopen.preferences.PartDrafting.FontType: Dotted Dashed
DOTTED_DASHED - Static variable in class nxopen.preferences.PartModeling.GridKnotLineFontType
DOTTED_DASHED - Static variable in class nxopen.preferences.PartObject.LineFontType: Dotted Dashed
DOTTED_DASHED - Static variable in class nxopen.preferences.ViewVisualizationVisual.SmoothEdgeFont
DOTTED_DASHED - Static variable in class nxopen.ViewDependentDisplayManager.Font
DOTTED_DATUM - Static variable in class nxopen.uf.UFGdt.DatumAssocType
DOTTEDDASHED - Static variable in class nxopen.preferences.SessionModeling.PolylineStyleType
DOUBLE - Static variable in class nxopen.blockstyler.PropertyList.PropertyType: Double
DOUBLE - Static variable in class nxopen.cam.CAMAttribute.ValueType
DOUBLE - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.VarTypes: Specifies a double variable
DOUBLE - Static variable in class nxopen.features.shipdesign.StiffenerSystemBuilder.OffsetSpacingModes
DOUBLE - Static variable in class nxopen.mechatronics.ProxyOverrideObjectBuilder.AttrType
DOUBLE - Static variable in class nxopen.mechatronics.SignalAdapterBuilder.DataType: double
DOUBLE - Static variable in class nxopen.partfamily.FamilyAttribute.AttrType: double attribute
DOUBLE - Static variable in class nxopen.pdm.PdmSoaqueryNxmgrfielddatatype: Double
DOUBLE - Static variable in class nxopen.PropertyContainer.PropertyType: Double
DOUBLE - Static variable in class nxopen.weld.CharacteristicsValueBuilder.Type: Indicates the attribute value contains a double.
DOUBLE_CLICK_REASON - Static variable in class nxopen.uistyler.StylerEvent.Reason: Double click reason
DOUBLE_DRAW - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.DrawType: For draw die, punch and binder are higher than die.
DOUBLE_JAPANESE_POSTCARD - Static variable in class nxopen.PrintBuilder.PaperSize: Double Japanese Postcard, 200- by 148-millimeters: Windows 98/Me, Windows NT 4.0 and later
DOUBLE_JAPANESE_POSTCARD_ROTATED - Static variable in class nxopen.PrintBuilder.PaperSize: Double Japanese Postcard Rotated, 148- by 200-millimeters: Windows 98/Me, Windows NT 4.0 and later
DOUBLE_MATRIX2D - Static variable in class nxopen.blockstyler.PropertyList.PropertyType: Double 2d-Matrix
DOUBLE_MATRIX2D - Static variable in class nxopen.PropertyContainer.PropertyType: Double 2d-Matrix
DOUBLE_OUTLINE - Static variable in class nxopen.uf.UFModl.PocketpadType
DOUBLE_OUTLINE_CORNER - Static variable in class nxopen.uf.UFModl.PocketpadType
DOUBLE_OUTLINE_NO_ATTACH - Static variable in class nxopen.uf.UFModl.PocketpadType
DOUBLE_SCALE - Static variable in class nxopen.View.ScaleFactor
DOUBLE_SIDED_COMPARISON - Static variable in class nxopen.validate.RequirementBuilder.DefinitionMethodOptions
DOUBLE_TYPE - Static variable in class nxopen.Part.PartFamilyAttrType: Deprecated.

double attribute
DOUBLE_VECTOR - Static variable in class nxopen.blockstyler.PropertyList.PropertyType: Double Vector
DOUBLE_VECTOR - Static variable in class nxopen.PropertyContainer.PropertyType: Double Vector
doubleA() - Method in interface nxopen.tooling.ScrapDesignBuilder: Returns the double A served as the parameter of overcut
License requirements: None.
doubleAngle() - Method in interface nxopen.tooling.ScrapDesignBuilder: Returns the double Angle served as the parameter of overcut
License requirements: None.
doubleArraySize() - Method in interface nxopen.motion.LmsSolverProperty: Returns the double array size
License requirements: None.
doubleB() - Method in interface nxopen.tooling.ScrapDesignBuilder: Returns the double B served as the parameter of overcut
License requirements: None.
DoubleBlock - Interface in nxopen.blockstyler: Represents a Double block .
doubleBorder() - Method in interface nxopen.annotations.TableSectionStyleBuilder: Returns the double border flag setting
License requirements: None.
doubleClick(StylerEvent) - Method in interface nxopen.uistyler.MultiSelectList.DoubleClick: Called when a dialog user selects an entry with a single mouse click or presses the spacebar on a selected item.
doubleClick(StylerEvent) - Method in interface nxopen.uistyler.SelectionBox.DoubleClick: Called when a dialog user double-clicks on an option in the selection box or presses Return when an item is already selected.
doubleClick(StylerEvent) - Method in interface nxopen.uistyler.SingleSelectList.DoubleClick: Called when a dialog user double-clicks on an option or presses Return when an item is already selected.
doubleDefault() - Method in interface nxopen.annotations.MasterSymbolListItemBuilder: Returns the double default, this property is valid if text type is MasterSymbolListItemBuilder.TextTypes.REAL
License requirements: None.
doubleDirVecI() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder: Returns the double dir vec i
License requirements: None.
doubleDirVecJ() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder: Returns the double dir vec j
License requirements: None.
doubleDirVecK() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder: Returns the double dir vec k
License requirements: None.
doubleH() - Method in interface nxopen.tooling.ScrapDesignBuilder: Returns the double H served as the parameter of overcut
License requirements: None.
DoubleIntentData - Class in nxopen.cam: The data for CamUI_DoubleIntentComp .
DoubleIntentData() - Constructor for class nxopen.cam.DoubleIntentData
DoubleIntentData(double, ParamValueIntent, Inheritance) - Constructor for class nxopen.cam.DoubleIntentData: Constructor for the DoubleIntentData object.
doubleLower() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder: Returns the lower tolerance
License requirements: None.
doubleLowerParamOuterProfile() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder: Returns the double lower parameter outer profile
License requirements: None.
DoubleMatrixData() - Constructor for class nxopen.blockstyler.PropertyList.DoubleMatrixData
DoubleMatrixData() - Constructor for class nxopen.PropertyContainer.DoubleMatrixData
doubleMax() - Method in interface nxopen.annotations.MasterSymbolListItemBuilder: Returns the double max, this property is valid if text type is MasterSymbolListItemBuilder.TextTypes.REAL
License requirements: None.
doubleMin() - Method in interface nxopen.annotations.MasterSymbolListItemBuilder: Returns the double min, this property is valid if text type is MasterSymbolListItemBuilder.TextTypes.REAL
License requirements: None.
doubleNominal() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder: Returns the nominal tolerance
License requirements: None.
doubleParamExtArea() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder: Returns the double parameter extent area
License requirements: None.
doubleParamExtLength() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder: Returns the double parameter extent length
License requirements: None.
doubleParamOuterProfile() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder: Returns the double parameter outer profile
License requirements: None.
doubleParamTolValue() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder: Returns the double parameter tolerance value
License requirements: None.
doubleParamTolValue1() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder: Returns the double parameter tolerance value1
License requirements: None.
doubleR() - Method in interface nxopen.tooling.ScrapDesignBuilder: Returns the double R served as the parameter of overcut
License requirements: None.
doubleSide() - Method in interface nxopen.blockstyler.SpecifyVector: Returns the DoubleSide
License requirements: None.
doubleSidedMaximumValue() - Method in interface nxopen.validate.RequirementBuilder: Returns the maximum value in double sided comparison
License requirements: None.
doubleSidedMinimumValue() - Method in interface nxopen.validate.RequirementBuilder: Returns the minimum value in double sided comparison
License requirements: None.
DoubleStatusData - Class in nxopen.cam: The data for CamUI_DoubleStatusComp .
DoubleStatusData() - Constructor for class nxopen.cam.DoubleStatusData
DoubleStatusData(double, Inheritance) - Constructor for class nxopen.cam.DoubleStatusData: Constructor for the DoubleStatusData object.
doubleUpper() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder: Returns the upper tolerance
License requirements: None.
doublevalue - Variable in class nxopen.cam.NCAssistantBuilder.ResultsData: the corresponding analysis value of the face, depth, corner or fillets radius or draft angle
doubleValue() - Method in interface nxopen.cam.UdeParameter: Returns the double value of the parameter
License requirements: None.
doubleValue - Variable in class nxopen.mechatronics.SignalAdapterBuilder.SignalData: Data Value (double)
doubleViewScale() - Method in interface nxopen.tooling.AssemblyDrawingBuilder: Returns a double view scale
License requirements: None.
doubleViewVecI() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder: Returns the double view vec i
License requirements: None.
doubleViewVecJ() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder: Returns the double view vec j
License requirements: None.
doubleViewVecK() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder: Returns the double view vec k
License requirements: None.
doUpdate() - Method in interface nxopen.annotations.TitleBlock: Update Title Block
License requirements: drafting ("DRAFTING")
.
doUpdate(boolean, boolean, boolean) - Method in interface nxopen.features.HumanBuilder: Update human
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
doUpdate(int) - Method in interface nxopen.Update: Updates the current session
License requirements: None.
doUpload() - Method in interface nxopen.pdm.CAEFileContainer: Upload CAE files to Teamcenter, independent of a standard file->save.
DOVE_TAIL_SLOT - Static variable in class nxopen.uf.UFModl.SlotType
dowelHoleParent() - Method in interface nxopen.die.DrawDiePunchBuilder: Returns the dowel hole parent builder of the draw die punch.
dowelHoleParent() - Method in interface nxopen.die.RotorBuilder: Returns the dowel holes parent builder of the rotor.
dowelHoleParent() - Method in interface nxopen.die.SteelInsertBuilder: Returns the dowel hole parent builder of the diesteelinsert
License requirements: ug_die_design ("Die Design")
.
DOWN - Static variable in class nxopen.annotations.PartsListBuilder.PartsListGrowDirectionOptions
DOWN - Static variable in class nxopen.annotations.TableCellStyleBuilder.TabDirectionType
DOWN - Static variable in class nxopen.annotations.TableSectionStyleBuilder.ContinuationPropertyType: Down
DOWN - Static variable in class nxopen.drawings.DrawingRegionBuilder.RegionVerticalGrowthDirection
DOWN - Static variable in class nxopen.features.shipdesign.StandardPartItemBuilder.Direction: down
DOWN - Static variable in class nxopen.tooling.BendInsertDesignBuilder.BendingDirectionOption: bending down
DOWN_ONLY - Static variable in class nxopen.cam.ProfileStrategy.Types: Profile strategy: Down Only
DOWN_ONLY - Static variable in class nxopen.cam.RoughTurningBuilder.CleanupTypes: Cleanup mode: Down only
DOWN_TO_NEAREST - Static variable in class nxopen.formboard.LayoutLengthOptions.RoundingMethod: Lengths are rounded down to the nearest increment value.
downArrow(String[], String[]) - Method in interface nxopen.gateway.BaseExplicitOrderBuilder: Moves down the row/rows selected by the user in the lists
License requirements: None.
downdir - Variable in class nxopen.routing.SplinePathBuilder.IsLengthLockedData
downdir - Variable in class nxopen.routing.SplinePathBuilder.IsSplineSlackedData
downDirection() - Method in interface nxopen.routing.RouteManager: Returns the down direction for the part used by Routing.
DOWNFROM_TOP_LEFT - Static variable in class nxopen.drawings.DrawingRegionBuilder.RegionGrowthDirection
DOWNFROM_TOP_RIGHT - Static variable in class nxopen.drawings.DrawingRegionBuilder.RegionGrowthDirection
downOffsetValue() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder: Returns the expression containing the offset value of the down section(at 270 degrees).
DOWNSTREAM - Static variable in class nxopen.cae.Post.StreamlineDirection
DOWNSTREAM - Static variable in class nxopen.cae.Post.StreamlineSynchronization
downToleranceForLength() - Method in interface nxopen.tooling.DieDesPierceInsertBuilder: Returns the down tolerance value for length.
downToleranceForWidth() - Method in interface nxopen.tooling.DieDesPierceInsertBuilder: Returns the down tolerance value for width.
DOWNWARD - Static variable in class nxopen.cae.xyplot.TextOrientation: Downward text orientation
DPI150 - Static variable in class nxopen.display.StudioImageCaptureBuilder.DPIEnumType: Set image at 150 DPI resolution
DPI72 - Static variable in class nxopen.display.StudioImageCaptureBuilder.DPIEnumType: Set image at 72 DPI resolution
dpiEnum() - Method in interface nxopen.display.StudioImageCaptureBuilder: Returns the dpi enum
License requirements: None.
dplaneNormal - Variable in class nxopen.uf.UFModeling.AskDatumPlaneData
dplanePoint - Variable in class nxopen.uf.UFModeling.AskDatumPlaneData
dplanes - Variable in class nxopen.uf.UFModlFeatures.AskDatumCsysComponentsData
dplaneTag - Variable in class nxopen.uf.UFModlFeatures.CreateRelativeDplaneData
dpmcvDriveCurves() - Method in interface nxopen.cam.DmCurveBuilder: Returns the Drive Curves
License requirements: cam_base ("CAM BASE")
.
dpmcvEndPercBuilder() - Method in interface nxopen.cam.DmCurveBuilder: Returns the Curve Drive Method End Cut Range builder(inheritable double)
License requirements: None.
dpmcvNumSegsBuilder() - Method in interface nxopen.cam.DmCurveBuilder: Returns the Point Type of Curve Drive Method Cut Step Type builder(inheritable int)
License requirements: None.
dpmcvStartPercBuilder() - Method in interface nxopen.cam.DmCurveBuilder: Returns the Curve Drive Method Start Cut Range builder(inheritable double)
License requirements: None.
dpmcvStepTolBuilder() - Method in interface nxopen.cam.DmCurveBuilder: Returns the Not Point Type of Curve Drive Method Cut Step Type builder(inheritable double)
License requirements: None.
dpmcvStepType() - Method in interface nxopen.cam.DmCurveBuilder: Returns the Curve Cut Step Option
License requirements: None.
DPMItpBuilder - Interface in nxopen.cam: Represents an DPMItp Builder
To create a new instance of this class, use OperationCollection.createDpmitpBuilder(nxopen.cam.CAMObject)

Created in NX5.0.0
DPMItpBuilder.CutTypeOption - Class in nxopen.cam: Enum of cut type
DPMItpBuilder.SelectionMethodOption - Class in nxopen.cam: Enum of selection method
DPMItpBuilder.StepMethodOption - Class in nxopen.cam: Enum of step method
DPMItpBuilder.StepoverTypeOption - Class in nxopen.cam: Enum of stepover type
DPMItpBuilder.ToolPositionOption - Class in nxopen.cam: Enum of tool position
dpmrcBoundaryLeftBuilder() - Method in interface nxopen.cam.DmRadBuilder: Returns the rad band, Opposite Side builder
License requirements: None.
dpmrcBoundaryRightBuilder() - Method in interface nxopen.cam.DmRadBuilder: Returns the rad band, Material Side builder
License requirements: None.
dpmStepoverBuilder() - Method in interface nxopen.cam.DmRadBuilder: Returns the Stepover builder
License requirements: None.
dpmStepoverMaxBuilder() - Method in interface nxopen.cam.DmRadBuilder: Returns the Maximum, Stepover for the Radial Cut method.
dpmStepoverMinBuilder() - Method in interface nxopen.cam.DmRadBuilder: Returns the Constant, Stepover for the Radial Cut method.
dpud() - Method in interface nxopen.UFSession
DRAFT - Static variable in class nxopen.cam.NCAssistantBuilder.AnalysisTypes: Analysis Type: Draft
DRAFT - Static variable in class nxopen.CGMBuilder.ImageResolutionOption: Draft Resolution
Draft - Interface in nxopen.features: Represents a Draft feature.
draft() - Method in interface nxopen.features.ExtrudeBuilder: Returns the extrude draft operation
License requirements: None.
DRAFT - Static variable in class nxopen.features.OffsetCurveBuilder.Types: Draft
DRAFT - Static variable in class nxopen.PlotBuilder.ImageResolutionOption: Draft Resolution
DRAFT - Static variable in class nxopen.preferences.SessionVisualizationHighQualityImage.ResolutionType
DRAFT - Static variable in class nxopen.PrintBuilder.ImageResolutionOption: Draft Resolution
DRAFT - Static variable in class nxopen.PrintPDFBuilder.ImageResolutionOption: Draft Resolution
DraftAidLine() - Constructor for class nxopen.uf.UFDrf.DraftAidLine
DraftAidLine(int, int, UFDrf.SymbolInstance, int, double) - Constructor for class nxopen.uf.UFDrf.DraftAidLine
DraftAidText() - Constructor for class nxopen.uf.UFDrf.DraftAidText
DraftAidText(int, String, int, int, String) - Constructor for class nxopen.uf.UFDrf.DraftAidText
DraftAidTextInfo() - Constructor for class nxopen.uf.UFDrf.DraftAidTextInfo
DraftAidTextInfo(UFDrf.TextType, int, double, double, double[], double, double, double, double, double, double, int, UFDrf.DraftAidText[]) - Constructor for class nxopen.uf.UFDrf.DraftAidTextInfo
draftAllInstances() - Method in interface nxopen.features.DraftBuilder: Returns the option "Draft all instances" [true/false]
License requirements: solid_modeling ("SOLIDS MODELING")
.
DraftAnalysis - Interface in nxopen.geometricanalysis: Represents a Draft Analysis builder
To create or edit an instance of this class, use DraftAnalysisBuilder

Created in NX8.0.0
DraftAnalysisBuilder - Interface in nxopen.geometricanalysis: Represents a Draft Analysis builder
To create a new instance of this class, use AnalysisObjectCollection.createDraftAnalysisBuilder(nxopen.DisplayableObject)
Default values.
DraftAnalysisBuilder.DrawDirection - Class in nxopen.geometricanalysis: define draw direction items
DraftAnalysisBuilder.SelectOutput - Class in nxopen.geometricanalysis: define output options
draftAngle() - Method in interface nxopen.cae.optimization.TBSCastCondition: Returns the draft angle
License requirements: None.
draftAngle() - Method in interface nxopen.cam.GeometrySet: Returns the draft angle
License requirements: None.
draftAngle() - Method in interface nxopen.features.DraftBodyBuilder: Returns the draft angle
License requirements: None.
draftAngle() - Method in interface nxopen.features.OffsetCurveBuilder: Returns the angle
License requirements: None.
draftAngle() - Method in interface nxopen.features.RibBuilder: Returns the draft angle
License requirements: None.
draftAngle() - Method in interface nxopen.features.shipdesign.EndCutBuilder: Returns the draft angle
License requirements: None.
draftAngle() - Method in interface nxopen.geometricutilities.SimpleDraft: Returns the draft angle
License requirements: None.
DraftBody - Interface in nxopen.features: Represents a draft body feature
To create or edit an instance of this class, use DraftBodyBuilder

Created in NX5.0.0
DraftBodyBuilder - Interface in nxopen.features: Represents a DraftBody builder
To create a new instance of this class, use FeatureCollection.createDraftBodyBuilder(Feature)
Default values.
DraftBodyBuilder.MatchingScope - Class in nxopen.features: Describes the different match scopes.
DraftBodyBuilder.MatchingType - Class in nxopen.features: Describes the different match types
DraftBodyBuilder.MatchOption - Class in nxopen.features: Describes the different match options.
DraftBodyBuilder.Method - Class in nxopen.features: Describes the Draft Body method as true draft or isocline draft.
DraftBodyBuilder.RepairingPartingEdgeOption - Class in nxopen.features: Describes the different repair parting edges options.
DraftBodyBuilder.RepairOption - Class in nxopen.features: Describes the different repair options.
DraftBodyBuilder.Types - Class in nxopen.features: Describes the different Draft Body types
draftBothSides() - Method in interface nxopen.features.DraftBuilder: Returns whether to draft on both sides of the reference
License requirements: None.
DraftBuilder - Interface in nxopen.features: Represents a Draft Feature Builder that creates or edits a draft (Old name Taper) feature.
DraftBuilder.DraftReferencesMethods - Class in nxopen.features: Describes the different Draft Methods in Draft References
DraftBuilder.Method - Class in nxopen.features: Describes the Draft type as true draft or isocline draft.
DraftBuilder.Type - Class in nxopen.features: Describes the different Draft types
draftDirectionVector - Variable in class nxopen.uf.UFCurve.AskOffsetDirection2Data
draftDirectionVector - Variable in class nxopen.uf.UFCurve.AskOffsetDirectionData
draftHeight() - Method in interface nxopen.features.OffsetCurveBuilder: Returns the height
License requirements: None.
DRAFTING - Static variable in class nxopen.drawings.GeneralWorkFlowBuilder.GridSettingsType
DRAFTING - Static variable in class nxopen.DxfdwgCreator.OutputToOption: output to drafting
DRAFTING - Static variable in class nxopen.FileNewApplication: Deprecated.

Specifies a drafting file new template
DRAFTING - Static variable in class nxopen.NXTo2dCreator.OutputToOption: output to drafting
drafting() - Method in interface nxopen.Part: Returns the DraftingManager for part .
drafting() - Method in interface nxopen.preferences.PartPreferences: Returns object for doing Drafting preferences settings applicable to displayed part .
DRAFTING - Static variable in class nxopen.preferences.SessionDrafting.GridObjectType: Drafting Grid
drafting() - Method in interface nxopen.preferences.SessionPreferences: Returns object for doing Drafting preferences settings applicable to entire session .
DRAFTING_ANNOTATION - Static variable in class nxopen.layout2d.Layout2dComponentMemberType
DRAFTING_ANNOTATION_NON_DIMENSION - Static variable in class nxopen.layout2d.Layout2dComponentMemberType
DRAFTING_ANNOTATIONS - Static variable in class nxopen.DisplayManager.ShowHideType: Show or hide all drafting types.
DRAFTING_DIMENSION - Static variable in class nxopen.layout2d.Layout2dComponentMemberType
DRAFTING_DIMENSIONS - Static variable in class nxopen.DisplayManager.ShowHideType: Show or hide drafting dimensions
DRAFTING_GDT - Static variable in class nxopen.DisplayManager.ShowHideType: Show or hide drafting gdt
DRAFTING_IMAGE_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
DRAFTING_IMAGE_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
DRAFTING_NOTES - Static variable in class nxopen.DisplayManager.ShowHideType: Show or hide drafting notes
DRAFTING_SYMBOLS - Static variable in class nxopen.DisplayManager.ShowHideType: Show or hide drafting symbols
DraftingAid - Interface in nxopen.annotations: Represents a drafting aid
This is an abstract class.
DraftingApplicationManager - Interface in nxopen.drafting: Represents an object that manages drafting objects and member views.
DraftingArbitraryTarget - Interface in nxopen.annotations: Represents a drafting arbitrary datum target.
draftingBodies() - Method in interface nxopen.drawings.DraftingView: Returns the DraftingBodyCollection .
DraftingBody - Interface in nxopen.drawings: Represents a drafting body.
DraftingBodyCollection - Interface in nxopen.drawings: Represents a collection of DraftingBody s.
DraftingCurve - Interface in nxopen.drawings: Represents a Drafting VD Curve.
DraftingCurveCollection - Interface in nxopen.drawings: Represents a collection of DraftingCurve s.
DraftingCurveInfo - Interface in nxopen.drawings: Represents Drafting Curve Info .
DraftingCurveInfo.DraftingCurveType - Class in nxopen.drawings: Specifies the drafting curve types
draftingCurves() - Method in interface nxopen.drawings.DraftingBody: Returns the DraftingCurveCollection .
DraftingCustomSymbolBuilder - Interface in nxopen.annotations: Represents builder for Drafting Custom Symbol
To create a new instance of this class, use CustomSymbolCollection.createDraftingCustomSymbolBuilder(nxopen.annotations.CustomSymbol)

Created in NX7.5.0
DraftingDatum - Interface in nxopen.annotations: Represents a datum
To create or edit an instance of this class, use DraftingDatumFeatureSymbolBuilder

Created in NX5.0.0
DraftingDatumFeatureSymbolBuilder - Interface in nxopen.annotations: datum feature symbol builder
To create a new instance of this class, use GdtDatumCollection.createDraftingDatumFeatureSymbolBuilder(nxopen.annotations.DraftingDatum)

Created in NX6.0.0
DraftingDatumTarget - Interface in nxopen.annotations: Represents a datum target
To create or edit an instance of this class, use DraftingDatumTargetBuilder

Created in NX5.0.0
DraftingDatumTargetBuilder - Interface in nxopen.annotations: Represents a DraftingDatumTargetBuilder
To create a new instance of this class, use AnnotationManager.createDraftingDatumTargetBuilder(nxopen.annotations.DraftingDatumTarget)
Default values.
DraftingDatumTargetCollection - Interface in nxopen.annotations: Represents a collection of DraftingDatumTarget objects
To obtain an instance of this class, refer to AnnotationManager

Created in NX8.0.1
draftingDatumTargets() - Method in interface nxopen.annotations.AnnotationManager: DraftingDatumTarget collection .
DraftingFcf - Interface in nxopen.annotations: Represents an FCF
To create or edit an instance of this class, use DraftingFeatureControlFrameBuilder

Created in NX4.0.0
DraftingFeatureControlFrameBuilder - Interface in nxopen.annotations: Represents a DraftingFeatureControlFrameBuilder
To create a new instance of this class, use AnnotationManager.createDraftingFeatureControlFrameBuilder(nxopen.annotations.Gdt)
Default values.
DraftingImage - Interface in nxopen.annotations: Represents a drafting image
To obtain an instance of this class, use DraftingImageCollection .
DraftingImage.ExportFileData - Class in nxopen.annotations: This class holds the data returned from DraftingImage.exportFile()
DraftingImage.FileType - Class in nxopen.annotations: The export image file types
DraftingImageCollection - Interface in nxopen.annotations: Represents a collection of DraftingImage objects
To obtain an instance of this class, refer to AnnotationManager

Created in NX9.0.0
draftingImages() - Method in interface nxopen.annotations.AnnotationManager: Drafting Image collection .
DraftingLineTarget - Interface in nxopen.annotations: Represents a drafting line datum target
To create or edit an instance of this class, use DraftingDatumTargetBuilder

Created in NX4.0.0
DraftingManager - Interface in nxopen: Represents an object that manages drafting objects and member views.
draftingManager() - Method in interface nxopen.Part: Returns the DraftingApplicationManager for part .
draftingMode() - Method in interface nxopen.tooling.EWDraftingBuilder: Returns the drafting mode: create, add or edit.
DraftingNoteBuilder - Interface in nxopen.annotations: Represents a Note builder
To create a new instance of this class, use AnnotationManager.createDraftingNoteBuilder(nxopen.annotations.SimpleDraftingAid)
Default values.
DraftingNoteBuilder.TextAlign - Class in nxopen.annotations: text over leader types for text
DraftingNoteBuilder.ThicknessTypes - Class in nxopen.annotations: thickness types for text
DraftingPointTarget - Interface in nxopen.annotations: Represents drafting point datum target
To create or edit an instance of this class, use DraftingDatumTargetBuilder

Created in NX4.0.0
draftingPreference() - Method in interface nxopen.preferences.PartPreferences: Returns object to modify the Preference settings for PMI/drafting application .
DraftingPreferenceManager - Interface in nxopen.preferences: Represents a collection of pmi preference builders.
draftingSketchCircles() - Method in interface nxopen.annotations.HoleTableSettingsHoleFiltersBuilder: Returns the drafting sketch circles
License requirements: None.
DraftingSplineBuilder - Interface in nxopen.features: Sketch Spline builder class.
DraftingStandardChangeList - Interface in nxopen.options: Records changes to option values at the specified level.
DraftingSurfaceFinish - Interface in nxopen.annotations: Represents a Drafting Surface Finish
To create or edit an instance of this class, use DraftingSurfaceFinishBuilder

Created in NX7.5.0
DraftingSurfaceFinishBuilder - Interface in nxopen.annotations: Represents a DraftingSurfaceFinish builder
To create a new instance of this class, use DraftingSurfaceFinishCollection.createDraftingSurfaceFinishBuilder(nxopen.annotations.DraftingSurfaceFinish)

Created in NX7.5.0
DraftingSurfaceFinishBuilder.FinishType - Class in nxopen.annotations: the valid types of finish type
DraftingSurfaceFinishCollection - Interface in nxopen.annotations: Represents a collection of DraftingSurfaceFinish objects
To obtain an instance of this class, refer to AnnotationManager

Created in NX7.5.0
draftingSurfaceFinishStandard() - Method in interface nxopen.annotations.SymbolPreferences: Returns the drafting surface finish standard
License requirements: None.
draftingSurfaceFinishStandard() - Method in interface nxopen.annotations.SymbolStyleBuilder: Returns the standard
License requirements: None.
draftingSurfaceFinishSymbols() - Method in interface nxopen.annotations.AnnotationManager: Drafting surface finish collection .
DraftingView - Interface in nxopen.drawings: Represents a drafting view.
DraftingViewCollection - Interface in nxopen.drawings: Represents a collection of DraftingView s.
DraftingViewCollection.ViewCopyAnnotOption - Class in nxopen.drawings: Specifies the the annotation copy mode.
DraftingViewCollection.ViewCopyDetailOption - Class in nxopen.drawings: Specifies the the view copy mode.
DraftingViewCollection.ViewUpdateOption - Class in nxopen.drawings: Specifies which drafting views to update.
draftingViews() - Method in interface nxopen.Part: Returns the DraftingViewCollection instance belonging to this part .
draftingViews() - Method in interface nxopen.weld.AutoWeldSymbolsBuilder: Returns the candidate views for weld symbol creation
License requirements: None.
draftIsoclineOrTruedraft() - Method in interface nxopen.features.DraftBuilder: Returns the Draft method
License requirements: solid_modeling ("SOLIDS MODELING")
.
draftMethod() - Method in interface nxopen.features.DraftBodyBuilder: Returns the draft method
License requirements: None.
draftOffset() - Method in interface nxopen.features.shipdesign.EndCutBuilder: Returns the draft offset.
draftOption() - Method in interface nxopen.geometricutilities.MultiDraft: Returns the draft type
License requirements: None.
DraftPointData - Interface in nxopen.geometricutilities: Represents a draft point data object
To create an instance of this class, see DraftPointDataCollection.createDraftPointData(nxopen.Point, java.lang.String)

Created in NX4.0.0
draftPointData() - Method in interface nxopen.Part: Returns the collection of DraftPointData .
DraftPointDataCollection - Interface in nxopen: This class contains the factory methods for creating a DraftPointData object.
draftReferencesMethod() - Method in interface nxopen.features.DraftBuilder: Returns the draft references method
License requirements: None.
draftType() - Method in interface nxopen.features.shipdesign.EndCutBuilder: Returns the draft type.
draftType() - Method in interface nxopen.geometricutilities.SimpleDraft: Returns the simple draft type
License requirements: None.
DraftVariableAngleData - Interface in nxopen.geometricutilities: Represents data containing variable angle draft point data objects
This class will not be created by the user.
DRAG - Static variable in class nxopen.annotations.AssociativeOriginType
DRAG - Static variable in class nxopen.features.subdivision.TransformCageData.TransformationMethodType: Edit cage topology by direct dragging
drag(StylerEvent) - Method in interface nxopen.uistyler.IntegerScale.Drag: Called when a dialog user moves the slider up and down the scale.
drag(StylerEvent) - Method in interface nxopen.uistyler.RealScale.Drag: Called when a dialog user moves the slider to a new position.
DRAG_REASON - Static variable in class nxopen.uistyler.StylerEvent.Reason: Drag reason
dragByRay(Point3d, Vector3d) - Method in interface nxopen.positioning.Network: Move objects which have been added to the network using Positioning.Network#addMovableObject .
dragByTransform(Vector3d, Matrix3x3) - Method in interface nxopen.positioning.Network: Move objects which have been added to the network using Positioning.Network#addMovableObject .
dragByTransform(Vector3d, Matrix3x3) - Method in interface nxopen.routing.ClockPartBuilder: Drag the selected objects by the given translation and rotation.
dragByTransform(Vector3d, Matrix3x3) - Method in interface nxopen.routing.TransformPathBuilder: Drag the selected objects by the given translation and rotation.
dragByTranslation(Vector3d) - Method in interface nxopen.positioning.Network: Move objects which have been added to the network using Positioning.Network#addMovableObject .
dragCurve() - Method in interface nxopen.features.RapidSurfaceBuilder: Returns the drag curve
License requirements: studio_free_form ("STUDIO FREE FORM")
.
dragCurvePoint() - Method in interface nxopen.features.RapidSurfaceBuilder: Drags curve point
License requirements: studio_free_form ("STUDIO FREE FORM")
.
dragCurvePointManager() - Method in interface nxopen.features.RapidSurfaceBuilder: Returns the curve used for drag curve point
License requirements: studio_free_form ("STUDIO FREE FORM")
.
dragData() - Method in interface nxopen.tooling.EnlargeSurfaceBuilder: Returns the drag preview body data from builder according to face.
draggedObject - Variable in class nxopen.features.subdivision.CageManipulatorData.ObjectMoveData: The dragged object.
dragHandlePositionPreference() - Method in interface nxopen.preferences.SessionAssemblies: Returns the drag handle position preference
License requirements: None.
dragLineLength() - Method in interface nxopen.routing.EditLineSegmentBuilder: Updates the line length based on the expression stored in this builder.
dragNDropMesh(Mesh, MeshCollector, MeshCollector) - Method in interface nxopen.cae.MeshManager: Call for doing Drag n Drop of a given Mesh across Mesh Collectors
License requirements: nx_masterfem ("Finite Element Modeling")
.
drapingAbsMeshSize() - Method in interface nxopen.cae.LaminateDrapingDataBuilder: Returns the absolute draping mesh size
License requirements: None.
drapingExtension() - Method in interface nxopen.cae.LaminatePly: Returns the draping extension selection
License requirements: None.
drapingInput() - Method in interface nxopen.cae.LaminatePly: Returns the draping data (draping settings)
License requirements: None.
drapingMeshRatio() - Method in interface nxopen.cae.LaminateDrapingDataBuilder: Returns the draping mesh ratio
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
drapingPath() - Method in interface nxopen.cae.LaminateDrapingDataBuilder: Returns the draping path
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
draw() - Method in interface nxopen.UFSession
DRAW_BAR - Static variable in class nxopen.die.AddendumSectionBuilder.SectionShapeType: Section consists of all segments in a draw bar shape.
DRAW_DIE - Static variable in class nxopen.tooling.DieBaseBuilder.DieBaseTypeOpt: draw die type
DRAW_DIRECTION - Static variable in class nxopen.die.DrawBeadBuilder.OrientSectionToDrawTypes: Orient height parameter to the draw direction.
DRAW_DIRECTION - Static variable in class nxopen.die.DrawBeadBuilder.ProjectionDirectionTypes: Project the centerline along the draw direction vector.
DRAW_ON_BOUNDARY - Static variable in class nxopen.features.RapidSurfaceBuilder.OperationTypes: draw on boundary
DRAW_ON_FACET_BODY - Static variable in class nxopen.features.RapidSurfaceBuilder.OperationTypes: draw on facet body
DRAW_PARENT_VIEW_LABEL_TEXT_ABOVE_STUB - Static variable in class nxopen.uf.UFDrf.ViewLabelTextToStubFormat
DRAW_PARENT_VIEW_LABEL_TEXT_BEFORE_STUB - Static variable in class nxopen.uf.UFDrf.ViewLabelTextToStubFormat
DrawBead - Interface in nxopen.die: Represents a draw bead feature.
DrawBeadBuilder - Interface in nxopen.die: Represents a builder that is used to create or edit a DrawBead feature.
DrawBeadBuilder.FemaleDepthTypes - Class in nxopen.die: Specifies how the female depth is calculated or defined.
DrawBeadBuilder.FemaleWidthTypes - Class in nxopen.die: Specifies how the feamle width is calcualted or defined.
DrawBeadBuilder.MaleBeadPositionTypes - Class in nxopen.die: Identifes which casting the male bead is created in.
DrawBeadBuilder.OrientationTypes - Class in nxopen.die: Identifies the orientation of the base parameters to the sheet metal.
DrawBeadBuilder.OrientSectionToDrawTypes - Class in nxopen.die: Specifies if the segment height section parameter should be oriented to the draw direction or the sheet metal normal at the section location.
DrawBeadBuilder.OutputTypes - Class in nxopen.die: Specifies what type of output is desired for the feature creation.
DrawBeadBuilder.ProjectionDirectionTypes - Class in nxopen.die: Identifes how the centerline should be projected to the placement face during processing.
DrawBeadBuilder.TransitionDefinitionTypes - Class in nxopen.die: Specifies how the transition area should be determined from segment to segment within a single bead.
drawBeadCurves() - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder: Returns the draw bead profiles.
DrawBeadSegmentBuilder - Interface in nxopen.die: Segment builder for Die Engineering draw bead.
DrawBeadSegmentBuilder.MaleBeadWidthTypes - Class in nxopen.die: value for how the male width is specified.
DrawBeadSegmentBuilderList - Interface in nxopen.die: Represents a list of objects.
DrawBeadTaperBuilder - Interface in nxopen.die: Taper definition for the end of the Die Engineering Draw Bead.
DrawBeadTaperBuilder.TaperTypes - Class in nxopen.die: Taper types to define how the slope is created for the bead end.
drawBeadTypeOption() - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder: Returns the draw bead type.
drawBoundaryCurve() - Method in interface nxopen.features.RapidSurfaceBuilder: Draws boundary curve
License requirements: studio_free_form ("STUDIO FREE FORM")
.
drawCurve() - Method in interface nxopen.features.RapidSurfaceBuilder: Draws curve
License requirements: studio_free_form ("STUDIO FREE FORM")
.
drawDiePunch(nxopen.features.Feature) - Method in interface nxopen.die.DieCollection: Creates the draw die punch feature builder.
DrawDiePunch - Interface in nxopen.features: Represents a draw die punch feature.
DrawDiePunchBuilder - Interface in nxopen.die: Represents a Draw Die Punch feature builder.
DrawDiePunchBuilder.PunchProfileData - Class in nxopen.die: This class holds the data returned from DrawDiePunchBuilder.getPunchProfile()
DrawDiePunchSectionBuilder - Interface in nxopen.die: Represents a Draw Die Punch Section sub feature.
DrawDiePunchSectionBuilder.FormingAttributesData - Class in nxopen.die: This class holds the data returned from DrawDiePunchSectionBuilder.getFormingAttributes()
DrawDiePunchSectionBuilder.PunchProfileAttributesData - Class in nxopen.die: This class holds the data returned from DrawDiePunchSectionBuilder.getPunchProfileAttributes()
drawDirection() - Method in interface nxopen.bodydes.OnestepUnformBuilder: Returns the draw direction used to define the normal of unform base plane.
drawDirection() - Method in interface nxopen.die.AddendumSectionBuilder: Returns the draw direction.
drawDirection() - Method in interface nxopen.die.DrawBeadBuilder: Returns the draw direction.
drawDirection() - Method in interface nxopen.die.TrimLineDevelopmentBuilder: Returns the draw direction.
drawDirection() - Method in interface nxopen.features.ConcaveFacesBuilder: Returns the vector representing the draw direction.
drawDirection() - Method in interface nxopen.features.DraftBodyBuilder: Returns the draw direction
License requirements: None.
DRAWING - Static variable in class nxopen.drawings.StandardViewsBuilder.View: drawing (2d) views
DRAWING - Static variable in class nxopen.DxfdwgCreator.ExportDataOption: export drawing data
DRAWING - Static variable in class nxopen.NXTo2dCreator.ExportDataOption: export drawings only
DRAWING - Static variable in class nxopen.tooling.AssemblyDrawingBuilder.Types
DRAWING - Static variable in class nxopen.tooling.CompDrawingBuilder.FilterSelection: filter componnets by drawing
DRAWING - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ProcessType: The process of die travels from binder to punch.
DRAWING_ANNOTATION - Static variable in class nxopen.DisplayManager.ShowHideType: Show or hide all drafting annotations.
DRAWING_AREA_FILL - Static variable in class nxopen.DisplayManager.ShowHideType: Show or hide all drafting Area Fill.
DRAWING_BALLOONS - Static variable in class nxopen.DisplayManager.ShowHideType: Show or hide all drafting Balloons.
DRAWING_CENTERLINES - Static variable in class nxopen.DisplayManager.ShowHideType: Show or hide all drafting Centerlines.
DRAWING_CROSSHATCH - Static variable in class nxopen.DisplayManager.ShowHideType: Show or hide all drafting Crosshatch.
DRAWING_CUSTOM_SYMBOLS - Static variable in class nxopen.DisplayManager.ShowHideType: Show or hide all all drafting Custom Symbols.
DRAWING_DATUM_FEATURE_SYMBOLS - Static variable in class nxopen.DisplayManager.ShowHideType: Show or hide all drafting Datum Feature Symbols.
DRAWING_DATUM_TARGETS - Static variable in class nxopen.DisplayManager.ShowHideType: Show or hide all drafting Datum Targets.
DRAWING_DIMENSIONS - Static variable in class nxopen.DisplayManager.ShowHideType: Show or hide all drafting dimensions.
DRAWING_DISPLAYED - Static variable in class nxopen.PartCollection.SdpsStatus: A drawing is currently displayed
DRAWING_FEATURE_CONTROL_FRAME - Static variable in class nxopen.DisplayManager.ShowHideType: Show or hide all drafting Feature Control Frames.
DRAWING_GRID - Static variable in class nxopen.uf.UFDisp.GridContext
DRAWING_HOLE_TABLES - Static variable in class nxopen.DisplayManager.ShowHideType: Show or hide all Hole Tables.
DRAWING_IMAGES - Static variable in class nxopen.DisplayManager.ShowHideType: Show or hide all Images.
DRAWING_INTERSECTION_SYMBOLS - Static variable in class nxopen.DisplayManager.ShowHideType: Show or hide all drafting Intersection Symbols.
DRAWING_MASTER_PART_NAME - Static variable in class nxopen.annotations.AssociativeText.PropertyType: Drawing master part name
DRAWING_MEMBER_TYPE - Static variable in class nxopen.uf.UFView.Type
DRAWING_NOTES - Static variable in class nxopen.DisplayManager.ShowHideType: Show or hide all drafting Notes.
DRAWING_NUMBER_OF_PRIMARY_SHEETS - Static variable in class nxopen.annotations.AssociativeText.PropertyType: Drawing sheet number of primary sheets
DRAWING_NUMBER_OF_SHEETS - Static variable in class nxopen.annotations.AssociativeText.PropertyType: Drawing sheet number of sheets
DRAWING_OBJECTS - Static variable in class nxopen.DisplayManager.ShowHideType: Show or hide all drafting types.
DRAWING_PART_NAME - Static variable in class nxopen.annotations.AssociativeText.PropertyType: Drawing part name
DRAWING_PARTS_LISTS - Static variable in class nxopen.DisplayManager.ShowHideType: Show or hide all Parts Lists.
DRAWING_SHEET - Static variable in class nxopen.DxfdwgImporter.SendModelDataAs: send model data to drawing sheet
DRAWING_SHEET_NAME - Static variable in class nxopen.annotations.AssociativeText.PropertyType: Drawing sheet name
DRAWING_SHEET_NUMBER - Static variable in class nxopen.annotations.AssociativeText.PropertyType: Drawing sheet number
DRAWING_SHEET_PROJECTION_ANGLE - Static variable in class nxopen.annotations.AssociativeText.PropertyType: Drawing sheet projection angle
DRAWING_SHEET_REVISION - Static variable in class nxopen.annotations.AssociativeText.PropertyType: Drawing sheet revision
DRAWING_SHEET_SCALE_DENOMINATOR - Static variable in class nxopen.annotations.AssociativeText.PropertyType: Drawing sheet scale denominator
DRAWING_SHEET_SCALE_NUMERATOR - Static variable in class nxopen.annotations.AssociativeText.PropertyType: Drawing sheet scale numerator
DRAWING_SHEET_SIZE - Static variable in class nxopen.annotations.AssociativeText.PropertyType: Drawing sheet size
DRAWING_SHEET_TYPE - Static variable in class nxopen.uf.UFView.Type
DRAWING_SHEET_UNITS - Static variable in class nxopen.annotations.AssociativeText.PropertyType: Drawing sheet units
DRAWING_SHEET_ZONE - Static variable in class nxopen.annotations.AssociativeText.PropertyType: Drawing sheet zone
DRAWING_STANDARD - Static variable in class nxopen.drawings.GeneralWorkFlowBuilder.SettingsOrientationType
DRAWING_SURFACE_FINISH_SYMBOLS - Static variable in class nxopen.DisplayManager.ShowHideType: Show or hide all drafting Surface Finish Symbols.
DRAWING_TABLES - Static variable in class nxopen.DisplayManager.ShowHideType: Show or hide all drafting tables.
DRAWING_TABULAR_NOTES - Static variable in class nxopen.DisplayManager.ShowHideType: Show or hide all Tabular Notes.
DRAWING_TARGET_POINT_SYMBOLS - Static variable in class nxopen.DisplayManager.ShowHideType: Show or hide all drafting Target Point Symbols.
DRAWING_TEMPLATE - Static variable in class nxopen.drawings.GeneralWorkFlowBuilder.SettingsOrientationType
DRAWING_TITLE_BLOCKS - Static variable in class nxopen.DisplayManager.ShowHideType: Show or hide all Title Blocks.
DRAWING_TYPE - Static variable in class nxopen.tooling.ToolingCloneparttype: Drawing part
DRAWING_VIEW - Static variable in class nxopen.DxfdwgImporter.SendLayoutsAs: send Layout data to drawing view
DRAWING_VIEW - Static variable in class nxopen.DxfdwgImporter.SendModelDataAs: send model data to drawing view
DRAWING_VIEW_PREFIX - Static variable in class nxopen.annotations.AssociativeText.PropertyType: Drawing view prefix
DRAWING_VIEW_ROTATION_ANGLE - Static variable in class nxopen.annotations.AssociativeText.PropertyType: View rotation angle
DRAWING_WELD_SYMBOLS - Static variable in class nxopen.DisplayManager.ShowHideType: Show or hide all drafting Weld Symbols.
DrawingArea - Interface in nxopen.blockstyler: Represents a Drawing Area block .
DrawingAutomationWizard - Interface in nxopen.drafting: Represents callback data for the drawing automation wizard.
drawingAutomationWizardHandler(DrawingAutomationWizard) - Method in interface nxopen.DrawingUtils.DrawingAutomationWizardHandler: User defined method that is called whenever Booklet Wizard is committed.
drawingCgmData() - Method in interface nxopen.PartSaveOptions: Returns the option indicating whether to generate the CGM data and store it in the QAF when you save the part file
License requirements: None.
drawingCompare() - Method in interface nxopen.Part: Returns the DraftingManager for part .
DrawingCompareManager - Interface in nxopen: Represents an object that manages drawing compare.
DrawingCompareSettingsBuilder - Interface in nxopen.drawings: Represents a DrawingCompareSettingsBuilder builder
To create a new instance of this class, use DrawingCompareManager.createDrawingCompareSettingsBuilder()
Default values.
DrawingCompareSettingsBuilder.ChangeSymbolType - Class in nxopen.drawings: Represents a Compare Settings Change symbol Types
DrawingCompareSettingsBuilder.ComparisonBaseline - Class in nxopen.drawings: Represents a Compare Settings ComparisonBaseline
DrawingCompareSettingsBuilder.FontType - Class in nxopen.drawings: Represents a Compare Settings Change symbol font types
DrawingCompareSettingsBuilder.WidthType - Class in nxopen.drawings: Represents a Compare Settings Change symbol width types
DrawingCreationWizardBuilder - Interface in nxopen.drafting: Represents a DrawingCreationWizardBuilder .
DrawingDisplayData() - Constructor for class nxopen.uf.UFDisp.DrawingDisplayData
DrawingDisplayData(boolean, int, int, int, int, boolean) - Constructor for class nxopen.uf.UFDisp.DrawingDisplayData
drawingFileNamingRule() - Method in interface nxopen.tooling.CompDrawingBuilder: Returns the naming rule of drawing files.
drawingFilter() - Method in interface nxopen.tooling.CompDrawingBuilder: Returns the drawing component drawing filter.
drawingFormatsheet() - Method in interface nxopen.drafting.PreferencesBuilder: Returns the drawing format sheet builder
License requirements: None.
drawingFormatTitle() - Method in interface nxopen.annotations.EditSettingsBuilder: Returns the drawing format title block builder
License requirements: None.
drawingFormatTitle() - Method in interface nxopen.drafting.PreferencesBuilder: Returns the drawing format title block builder
License requirements: None.
DrawingFormatTitleBuilder - Interface in nxopen.annotations: Represents a DrawingFormatTitleBuilder
Created in NX9.0.0
DrawingFormatTitleBuilder.TitleBlockPositionType - Class in nxopen.annotations: Represent the option of TitleBlockPosition that specifies Type display
drawingList() - Method in interface nxopen.DxfdwgCreator: Returns the drawing list - comma separated list of drawings to export
License requirements: None.
drawingList() - Method in interface nxopen.IgesCreator: Returns the drawing list - comma separated list of drawings
License requirements: None.
drawingName() - Method in interface nxopen.features.shipdesign.SectionViewBuilder: Returns the drawing name
License requirements: None.
drawingName() - Method in interface nxopen.NXTo2dCreator: Returns the drawing Name - name of drawing to export
License requirements: None.
drawingPlane() - Method in interface nxopen.features.PolylineBuilder: Returns the drawing plane
License requirements: None.
drawingPlane() - Method in interface nxopen.features.StudioSplineBuilderEx: Returns the drawing plane
License requirements: None.
drawingPlaneOption() - Method in interface nxopen.features.GeneralConicBuilder: Returns the drawing plane.
drawingPlaneOption() - Method in interface nxopen.features.PolylineBuilder: Returns a drawing plane option
License requirements: None.
drawingPlaneOption() - Method in interface nxopen.features.StudioSplineBuilderEx: Returns a drawing plane option
License requirements: None.
DrawingRegion - Interface in nxopen.drawings: Represents a Drawing Region
To create or edit an instance of this class, use DrawingRegionBuilder

Created in NX8.0.0
DrawingRegionBuilder - Interface in nxopen.drawings: Represents a Drawing Region Builder
To create a new instance of this class, use DrawingRegionCollection.createDrawingRegionBuilder(nxopen.drawings.DrawingRegion)
Default values.
DrawingRegionBuilder.ContentToMove - Class in nxopen.drawings: Specifies the region content to move
DrawingRegionBuilder.RegionContinuation - Class in nxopen.drawings: Specifies the region continuation type
DrawingRegionBuilder.RegionDraftingObjectType - Class in nxopen.drawings: Specifies the drafting object type
DrawingRegionBuilder.RegionGrowthDirection - Class in nxopen.drawings: Specifies the region growth direction (this is for CustomSymbol and Note )
DrawingRegionBuilder.RegionHorizontalGrowthDirection - Class in nxopen.drawings: Specifies the region horizontal growth direction
DrawingRegionBuilder.RegionVerticalGrowthDirection - Class in nxopen.drawings: Specifies the region vertical growth direction
DrawingRegionCollection - Interface in nxopen.drawings: Represents a collection of drawing regions
Use nxopen.drawings to get the instance of this class.
drawingRegionRulesBuilder() - Method in interface nxopen.drawings.DrawingRegionBuilder: Returns the DrawingRegionRules builder
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
DrawingRegionRulesBuilder - Interface in nxopen.drawings: Represents a Drawing region rules builder .
drawingRegions() - Method in interface nxopen.drafting.AutomationManager: Returns the RegionCollection instance .
drawingSheet - Variable in class nxopen.uf.UFDrf.ImageData
drawingSheetName() - Method in interface nxopen.tooling.DrawingSheetNameBuilder: Returns the drawing sheet name for adding a new drawing sheet
License requirements: None.
DrawingSheetNameBuilder - Interface in nxopen.tooling: Represents a DrawingSheetNameBuilder
To create a new instance of this class, use ToolingDrawingCollection.createDrawingSheetNameBuilder()

Created in NX8.5.0
drawingSheetNamingRule() - Method in interface nxopen.tooling.CompDrawingBuilder: Returns the naming rule of drawing sheets.
drawingSheets() - Method in interface nxopen.Part: Returns the DrawingSheetCollection instance belonging to this part .
drawingSizeEnum() - Method in interface nxopen.display.StudioImageCaptureBuilder: Returns the drawing size enum
License requirements: None.
drawingStyle() - Method in interface nxopen.drafting.DrawingCreationWizardBuilder: Returns the drawing style.
drawingTags - Variable in class nxopen.uf.UFDraw.AskDrawingsData
drawingTemplate() - Method in interface nxopen.features.shipdesign.ExpansionDrawingBuilder: Returns the drawing template
License requirements: None.
drawingTemplate() - Method in interface nxopen.features.shipdesign.SectionViewBuilder: Returns the drawing template builder, which represents a DrawingTemplateBuilder .
DrawingTemplateBuilder - Interface in nxopen.features.shipdesign: Represents a drawing template selection block .
drawingType() - Method in interface nxopen.tooling.EWDraftingBuilder: Returns the drawing type used to create drafting.
drawingTypesEnum() - Method in interface nxopen.routing.IsoDrawingBuilder: Returns the selected drawing style
License requirements: None.
DrawingUtils - Interface in nxopen: Contains various drawing utility methods
To obtain an instance of this class, refer to Session

Created in NX8.5.3
drawingUtils() - Method in interface nxopen.Session: Returns the DrawingUtils instance belonging to this session
Created in NX8.5.3
DrawingUtils.DrawingAutomationWizardHandler - Interface in nxopen: User defined method that is called whenever Booklet Wizard is committed.
DrawingView - Interface in nxopen.drawings: Drawing View - an empty view created without any geometric objects.
DrawingViewBuilder - Interface in nxopen.drawings: This builder allows the user to create a Drawing View
To create a new instance of this class, use DraftingViewCollection.createDrawingViewBuilder(nxopen.drawings.DrawingView)
Default values.
drawLineBetweenPoints() - Method in interface nxopen.features.WavePointBuilder: Returns the draw line
License requirements: None.
DrawnCutout - Interface in nxopen.features: Represents a DrawnCutout feature
To create or edit an instance of this class, use DrawnCutoutBuilder

Created in NX5.0.0
DrawnCutoutBuilder - Interface in nxopen.features.sheetmetal: Represents a Drawn Cutout feature builder.
DrawnCutoutBuilder.DepthTypeOptions - Class in nxopen.features.sheetmetal: This enum represents the depth direction for the drawn cutout.
DrawnCutoutBuilder.SectionSideOptions - Class in nxopen.features.sheetmetal: This enum represents the side of the section that the drawn cutout punches material.
DrawnCutoutBuilder.SidewallTypeOptions - Class in nxopen.features.sheetmetal: The side walls material option.
drawOption() - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder: Returns the draw option
License requirements: None.
drawOrientation() - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder: Returns the draw orientation
License requirements: None.
drawOrigin() - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder: Returns the draw origin
License requirements: None.
drawTypeOption() - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder: Returns the draw type.
drawVector() - Method in interface nxopen.die.SpringbackCompensationBuilder: Returns the vector indicating the draw direction.
drawVector() - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder: Returns the draw vector
License requirements: None.
drawVentHoles() - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder: Returns the switch that determines if vent holes are drawn in the diagram.
drawX() - Method in interface nxopen.annotations.DatumData: Returns the flag indicating whether to draw X, where the leader terminates
License requirements: None.
drawX() - Method in interface nxopen.annotations.DatumTargetBuilder: Deprecated.
Deprecated in NX10.0.0. Use nxopen.annotations.DatumTargetBuilder#terminatorTypes and nxopen.annotations.DatumTargetBuilder#setTerminatorTypes instead.
DRF - Static variable in class nxopen.cam.InspectionAnalyzeOutputBuilder.ReportingCsysType: Datum Reference Frame
drf() - Method in interface nxopen.UFSession
DRF_AID - Static variable in class nxopen.InferSnapType.SnapType: Snap point drafting aid
DRF_TANGENT - Static variable in class nxopen.InferSnapType.SnapType: Snap point drafting tangent
DrfData() - Constructor for class nxopen.uf.UFGdt.DrfData
DrfData(String, String, UFGdt.DrfReference, UFGdt.DrfReference, UFGdt.DrfReference) - Constructor for class nxopen.uf.UFGdt.DrfData
DrfReference() - Constructor for class nxopen.uf.UFGdt.DrfReference
DrfReference(UFGdt.DatumReference, Tag) - Constructor for class nxopen.uf.UFGdt.DrfReference
drfTransform() - Method in interface nxopen.cam.InspectionAnalyzeOutputBuilder: Returns the drf transform option
License requirements: None.
drfTxt - Variable in class nxopen.uf.UFModl.DimensionData
DRILL - Static variable in class nxopen.cam.CenterlineDrillTurningBuilder.CycleTypes: Cycle: Drill
DRILL - Static variable in class nxopen.cam.Tool.Types: Drilling tool
DRILL_BACK_SPOT_FACE - Static variable in class nxopen.cam.Tool.Subtypes: Back spot facing tool
DRILL_BORE - Static variable in class nxopen.cam.Tool.Subtypes: Boring tool
DRILL_BREAK_CHIP - Static variable in class nxopen.cam.CenterlineDrillTurningBuilder.CycleTypes: Cycle: Drill, Break Chip
DRILL_BURNISHING - Static variable in class nxopen.cam.Tool.Subtypes: Burnishing tool
DRILL_CENTER_BELL - Static variable in class nxopen.cam.Tool.Subtypes: Centerdrill
DRILL_CORE - Static variable in class nxopen.cam.Tool.Subtypes: Core Drill
DRILL_COUNTERBORE - Static variable in class nxopen.cam.Tool.Subtypes: Counterbore
DRILL_COUNTERSINK - Static variable in class nxopen.cam.Tool.Subtypes: Countersink
DRILL_DEEP - Static variable in class nxopen.cam.CenterlineDrillTurningBuilder.CycleTypes: Cycle: Drill, Deep
DRILL_DIRECTION - Static variable in class nxopen.annotations.HoleTableSettingsContentBuilder.Content: DrillDirection
DRILL_REAM - Static variable in class nxopen.cam.Tool.Subtypes: Reamer
DRILL_SIZE_HOLE - Static variable in class nxopen.annotations.HoleCalloutSettingsBuilder.Featuretype
DRILL_SIZE_HOLE - Static variable in class nxopen.features.HolePackageBuilder.Types: Drill Size hole
DRILL_SPC_GROOVE - Static variable in class nxopen.cam.Tool.Types: Milling tool-T cutter
DRILL_SPOT_DRILL - Static variable in class nxopen.cam.Tool.Subtypes: Spot drill
DRILL_SPOT_FACE - Static variable in class nxopen.cam.Tool.Subtypes: Spot facing tool
DRILL_STANDARD - Static variable in class nxopen.cam.Tool.Subtypes: Drilling tool
DRILL_STEP - Static variable in class nxopen.cam.Tool.Subtypes: Step drill
DRILL_TAP - Static variable in class nxopen.cam.Tool.Subtypes: Tap
DRILL_THREAD_MILL - Static variable in class nxopen.cam.Tool.Subtypes: Thread mill
DRILL_TYPE - Static variable in class nxopen.annotations.HoleTableSettingsContentBuilder.Content: DrillType
DrillBackSpotfacingToolBuilder - Interface in nxopen.cam: Represents a drill back spotfacing Tool Builder
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createDrillBackSpotfacingToolBuilder

Created in NX5.0.0
DrillBoreToolBuilder - Interface in nxopen.cam: Represents a drill bore Tool Builder
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createDrillBoreToolBuilder

Created in NX5.0.0
DrillBurnishingToolBuilder - Interface in nxopen.cam: Represents a drill burnishing Tool Builder
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createDrillBurnishingToolBuilder

Created in NX5.0.0
DrillCenterBellToolBuilder - Interface in nxopen.cam: Represents a Drill Center Bell Tool Builder
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createDrillCenterBellToolBuilder

Created in NX5.0.0
DrillCoreToolBuilder - Interface in nxopen.cam: Represents a drill core Tool Builder
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createDrillCoreToolBuilder

Created in NX9.0.0
DrillCounterboreToolBuilder - Interface in nxopen.cam: Represents a drill counterbore Tool Builder
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createDrillCounterboreToolBuilder

Created in NX5.0.0
DrillCtskToolBuilder - Interface in nxopen.cam: Represents a Drill Ctsk Tool Builder
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createDrillCtskToolBuilder

Created in NX5.0.0
DrillGeomBuilder - Interface in nxopen.cam: Represents a DrillGeom Builder
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createDrillGeomBuilder

Created in NX5.0.0
drillingLocation() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder: Returns the drilling location
License requirements: None.
DrillMethodBuilder - Interface in nxopen.cam: Represents a Drill Method Builder
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createDrillMethodBuilder

Created in NX5.0.0
DrillReamerToolBuilder - Interface in nxopen.cam: Represents a drill Tool Builder
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createDrillReamerToolBuilder

Created in NX5.0.0
drillSize() - Method in interface nxopen.features.HolePackageBuilder: Returns the drill size - this is applicable for drill size hole
License requirements: None.
drillSizeEndChamferAngle() - Method in interface nxopen.features.HolePackageBuilder: Returns the drill size end chamfer angle - this is applicable for drill size hole type
License requirements: None.
drillSizeEndChamferEnabled() - Method in interface nxopen.features.HolePackageBuilder: Returns the drill size end chamfer enabled - this is applicable for drill size hole type
License requirements: None.
drillSizeEndChamferOffset() - Method in interface nxopen.features.HolePackageBuilder: Returns the drill size end chamfer offset - this is applicable for drill size hole type
License requirements: None.
drillSizeFitOption() - Method in interface nxopen.features.HolePackageBuilder: Returns the drill size screw fit Option - this is applicable for drill size hole
License requirements: None.
drillSizeHoleDepth() - Method in interface nxopen.features.HolePackageBuilder: Returns the hole depth - this is applicable for drill size hole
License requirements: None.
drillSizeHoleDiameter() - Method in interface nxopen.features.HolePackageBuilder: Returns the hole diameter - this is applicable for drill size hole
License requirements: None.
drillSizeStandard() - Method in interface nxopen.features.HolePackageBuilder: Returns the drill size standard - this is applicable for drill size hole type
License requirements: None.
drillSizeStartChamferAngle() - Method in interface nxopen.features.HolePackageBuilder: Returns the drill size start chamfer angle - this is applicable for drill size hole type
License requirements: None.
drillSizeStartChamferEnabled() - Method in interface nxopen.features.HolePackageBuilder: Returns the drill size start chamfer enabled - this is applicable for drill size hole type
License requirements: None.
drillSizeStartChamferOffset() - Method in interface nxopen.features.HolePackageBuilder: Returns the drill size start chamfer offset - this is applicable for drill size hole type
License requirements: None.
drillSizeTipAngle() - Method in interface nxopen.features.HolePackageBuilder: Returns the tip angle - this is applicable for drill size hole
License requirements: None.
DrillSpotdrillToolBuilder - Interface in nxopen.cam: Represents a drill spotdrill Tool Builder
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createDrillSpotdrillToolBuilder

Created in NX5.0.0
DrillSpotfaceToolBuilder - Interface in nxopen.cam: Represents a drill spotface tool Builder
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createDrillSpotfaceToolBuilder

Created in NX5.0.0
DrillStdToolBuilder - Interface in nxopen.cam: Represents a drill std Tool Builder
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createDrillStdToolBuilder

Created in NX5.0.0
drillStep() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder: Returns the drill step
License requirements: None.
drillStepModifier1() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder: Returns the drill step modifier1
License requirements: None.
drillStepModifier2() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder: Returns the drill step modifier2
License requirements: None.
DrillStepToolBuilder - Interface in nxopen.cam: Represents a drill step Tool Builder
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createDrillStepToolBuilder

Created in NX5.0.0
DrillSurfaceBuilder - Interface in nxopen.cam: Represents a Drill Surface Builder
This is an abstract class and cannot be instantiated.
DrillSurfaceBuilder.SurfaceType - Class in nxopen.cam: Drill surface type
DrillTapToolBuilder - Interface in nxopen.cam: Represents a drill tap Tool Builder
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createDrillTapToolBuilder

Created in NX5.0.0
DrillTapToolBuilder.ToolTapHolderTypeTypes - Class in nxopen.cam: tap holder type
DrillTapToolBuilder.ToolThreadFormMethodTypes - Class in nxopen.cam: thread form method
DrillThreadMillToolBuilder - Interface in nxopen.cam: Represents a drill thread mill Tool Builder
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createDrillThreadMillToolBuilder

Created in NX5.0.0
DrillThreadMillToolBuilder.ToolFormTypeTypes - Class in nxopen.cam: form type
DrillToolBuilder - Interface in nxopen.cam: Represents a drill Tool Builder
This is an abstract class, and cannot be instantiated.
DRIVE - Static variable in class nxopen.cam.TeachmodeProfileMoveBuilder.StartStopPositionMethods: Use drive geometry start or stop point
DRIVE - Static variable in class nxopen.uf.UFCam.GeomType
DRIVE_GEOM_COLOR - Static variable in class nxopen.uf.UFCamPref.CamPref
DRIVE_TO_POINT - Static variable in class nxopen.cam.LaserControlPoint.ProcessTypes: Drive to Point
DriveChainItemBuilder - Interface in nxopen.cam: Represents the Drive Chain Item Builder
This cannot be instantiated
.
DriveChainItemBuilderList - Interface in nxopen.cam: Represents a list of objects.
driveColor() - Method in interface nxopen.cam.Preferences: Returns the drive color
License requirements: None.
driveGeomColor - Variable in class nxopen.uf.UFCam.Preferences
driveGeometry() - Method in interface nxopen.cam.DmSurfBuilder: Returns the drive geometry
License requirements: cam_base ("CAM BASE")
.
driveGeometryType() - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder: Returns the drive geometry type
License requirements: None.
driveMode() - Method in interface nxopen.cam.BlendFinish: Returns the Drive Mode
License requirements: None.
DriveMode - Interface in nxopen.cam: Drive Mode Builder .
DriveMode.Type - Class in nxopen.cam: Available types for Drive Mode .
drivenByExpression(Expression) - Method in interface nxopen.features.GeodesicPoint: Edit a GeodesicSketch driven by an expression
License requirements: solid_modeling ("SOLIDS MODELING")

Created in NX10.0.0
drivePoint() - Method in interface nxopen.cam.ChamferMillingBuilder: Returns the drive point
License requirements: None.
drivePoint() - Method in interface nxopen.cam.PlanarMillingBuilder: Returns the drive point
License requirements: None.
driver() - Method in interface nxopen.features.vehicledesign.BaseDataBuilder: Returns the driver builder, which represents a BaseDataDriverBuilder .
DRIVER - Static variable in class nxopen.features.vehicledesign.ManikinBuilder.PositionType: Driver Type
DRIVER - Static variable in class nxopen.HumanPosturePredictionBuilder.OccupantType: Indicate Driver
driver() - Method in interface nxopen.sim.SimDebugBuilder: Returns the driver
License requirements: None.
DRIVER - Static variable in class nxopen.sim.SimDebugBuilder.KinematicModelType: Driver Kinematic Model
DRIVER_SIDE - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.LocationType: Represents the driver side location
driverGraph() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder: Returns the option to specify which driver definition is used in the suspension template.
driverGraphSketch() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder: Returns the sketch defining the driver for the suspension template.
DriverMultiOperations - Interface in nxopen.motion: Represents a DriverMultiOperations
Created in NX6.0.0
driverMultiOperations() - Method in interface nxopen.motion.JointDriverBuilder: Returns the driver operations
License requirements: None.
DriverOperation - Interface in nxopen.motion: Represents a DriverOperation
Created in NX5.0.0
DriverOperation.IntegrationType - Class in nxopen.motion: Integration type
DriverOperation.Type - Class in nxopen.motion: Driver operation type
driverPlane() - Method in interface nxopen.features.vehicledesign.VisionPlaneBuilder: Returns the driver side plane inclined angle.
driverSide() - Method in interface nxopen.features.vehicledesign.BaseDataDriverBuilder: Returns the Driver side.
driverSideExtension() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder: Returns the expression containing the value for the driver side extension.
driverSideMirrorFace() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder: Returns the face that represents the mirror surface at driver side.
driverSideStandard() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder: Returns the standard for the driver side mirror.
driveStock() - Method in interface nxopen.cam.GeometrySet: Returns the drive stock
License requirements: None.
driveStock() - Method in interface nxopen.cam.SurfaceDriveGeometrySet: Returns the drive stock
License requirements: None.
driving() - Method in interface nxopen.annotations.AngularDimensionBuilder: Returns the driving
License requirements: None.
DRIVING - Static variable in class nxopen.annotations.DrivingValueBuilder.DrivingValueMethod
driving() - Method in interface nxopen.annotations.GeodesicDimensionBuilder: Returns the driving value builder, which manages driving dimension values
License requirements: None.
driving() - Method in interface nxopen.annotations.LinearDimensionBuilder: Returns the driving
License requirements: None.
driving() - Method in interface nxopen.annotations.OrdinateDimensionBuilder: Returns the driving
License requirements: None.
driving() - Method in interface nxopen.annotations.RadialDimensionBuilder: Returns the driving
License requirements: None.
driving() - Method in interface nxopen.annotations.RapidDimensionBuilder: Returns the driving
License requirements: None.
driving() - Method in interface nxopen.SketchAngularDimensionBuilder: Returns the driving value builder, which manages driving dimension values
License requirements: None.
DRIVING - Static variable in class nxopen.SketchAutoDimensionBuilder.DimType: Driving dimension
DRIVING - Static variable in class nxopen.SketchDimensionalConstraint.DimensionStateType: Driving dimension
driving() - Method in interface nxopen.SketchLinearDimensionBuilder: Returns the driving value builder, which manages driving dimension values
License requirements: None.
driving() - Method in interface nxopen.SketchRadialDimensionBuilder: Returns the driving value builder, which manages driving dimension values
License requirements: None.
driving() - Method in interface nxopen.SketchRapidDimensionBuilder: Returns the driving value builder, which manages driving dimension values
License requirements: None.
drivingMethod() - Method in interface nxopen.annotations.DrivingValueBuilder: Returns the driving method
License requirements: None.
drivingPostureCheck() - Method in interface nxopen.features.vehicledesign.ManikinBuilder: Returns the driving posture check.
DrivingValueBuilder - Interface in nxopen.annotations: .
DrivingValueBuilder.DrivingExpressionMode - Class in nxopen.annotations
DrivingValueBuilder.DrivingValueMethod - Class in nxopen.annotations
drname() - Method in interface nxopen.routing.DesignRule: Returns the name of the design rule is returned
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
DROP_IMPACT - Static variable in class nxopen.cae.responsesimulation.VelocityImpactExcitationBuilder.ImpactMethodType: the users will be able to specify the drop height or the desired velocity at the impact
dropFace() - Method in interface nxopen.tooling.ReusableObjectPasteBuilder: Returns the drop face required for reattach sketch when using one-pick position method
License requirements: None.
dropHeight() - Method in interface nxopen.cae.responsesimulation.VelocityImpactParameters: Returns the drop height.
dropThruDiameter() - Method in interface nxopen.die.HoleChildBuilder: Returns the drop thru diameter of the die hole.
dropThruDiameter() - Method in interface nxopen.die.HoleParentBuilder: Returns the drop thru diameter of die holes.
drpos - Variable in class nxopen.uf.UFScop.GetNextDrivePointData
drpos() - Method in interface nxopen.UFSession
DSHEET - Static variable in class nxopen.PrintBuilder.PaperSize: D Sheet, 22- by 34-inches
DUAL_BRACKET - Static variable in class nxopen.annotations.LineComponent.LineType: dual bracket
DUAL_DIM_TEXT - Static variable in class nxopen.uf.UFDrf.TextType
DUAL_DIMENSION - Static variable in class nxopen.annotations.TextComponent.TextType: dual dimension text
DUAL_DIMENSION_ABOVE - Static variable in class nxopen.uf.UFDrf.DualDimensionFormat
DUAL_DIMENSION_AFTER - Static variable in class nxopen.uf.UFDrf.DualDimensionFormat
DUAL_DIMENSION_BEFORE - Static variable in class nxopen.uf.UFDrf.DualDimensionFormat
DUAL_DIMENSION_BELOW - Static variable in class nxopen.uf.UFDrf.DualDimensionFormat
DUAL_FOUR_AXIS_ON_DRIVE - Static variable in class nxopen.cam.ToolAxisVariable.Types: Dual 4-Axis on Drive
DUAL_FOUR_AXIS_ON_PART - Static variable in class nxopen.cam.ToolAxisVariable.Types: Dual 4-Axis on Part
DUAL_TOLERANCE - Static variable in class nxopen.annotations.TextComponent.TextType: dual tolerance text
DUAL_TOLERANCE_TEXT - Static variable in class nxopen.uf.UFDrf.TextType
dualConvertTolerance - Variable in class nxopen.uf.UFDrf.UnitsFormatPreferences
dualDimensionDecimalPlaces() - Method in interface nxopen.annotations.LinearTolerance: Returns the number of decimal places for dual dimension
License requirements: None.
dualDimensionFormat() - Method in interface nxopen.annotations.UnitsStyleBuilder: Returns the dual dimension format.
dualDimensionFormat - Variable in class nxopen.uf.UFDrf.UnitsFormatPreferences
dualDimensionFractionDenominator() - Method in interface nxopen.annotations.DimensionPreferences: Returns the dual dimension and tolerance fraction denominator
License requirements: None.
dualDimensionFractionDenominator() - Method in interface nxopen.annotations.DimensionStyleBuilder: Returns the dual dimension fractional denominator
License requirements: None.
DualDimensionPlacement - Class in nxopen.annotations: Specifies the dual dimension placement relative to the primary dimension
dualDimensionPlacement() - Method in interface nxopen.annotations.UnitsFormatPreferences: Returns the dual dimension placement relative to the primary dimension
License requirements: None.
dualDimensionTextFormat() - Method in interface nxopen.annotations.UnitsFormatPreferences: Returns the dual dimension text format
License requirements: None.
dualDimensionUnit() - Method in interface nxopen.annotations.UnitsFormatPreferences: Returns the dual dimension unit
License requirements: None.
dualDimensionUnits() - Method in interface nxopen.annotations.UnitsStyleBuilder: Returns the dual dimension units
License requirements: None.
dualDimensionUnits - Variable in class nxopen.uf.UFDrf.UnitsFormatPreferences
dualDimensionValueDp - Variable in class nxopen.uf.UFDrf.DimensionPreferences
dualDimensionValueDp - Variable in class nxopen.uf.UFDrf.DimensionPreferences1
dualDimensionValuePrecision() - Method in interface nxopen.annotations.DimensionStyleBuilder: Returns the dual dimension value precision
License requirements: None.
dualFractionDenominator - Variable in class nxopen.uf.UFDrf.DimensionPreferences
dualFractionDenominator - Variable in class nxopen.uf.UFDrf.DimensionPreferences1
dualFractionType() - Method in interface nxopen.annotations.UnitsStyleBuilder: Returns the decimal and fraction format for dual nonmetric dimensions
License requirements: None.
dualFractionType - Variable in class nxopen.uf.UFDrf.UnitsFormatPreferences
dualText - Variable in class nxopen.uf.UFDrf.AskDimensionTextData
dualTextLines - Variable in class nxopen.annotations.Dimension.DimensionTextData: List of dual text lines
dualToleranceDecimalPlaces() - Method in interface nxopen.annotations.LinearTolerance: Returns the number of decimal places for dual tolerance
License requirements: None.
dualToleranceValueDp - Variable in class nxopen.uf.UFDrf.DimensionPreferences
dualToleranceValueDp - Variable in class nxopen.uf.UFDrf.DimensionPreferences1
dualToleranceValuePrecision() - Method in interface nxopen.annotations.DimensionStyleBuilder: Returns the dual tolerance value precision
License requirements: None.
DUCK - Static variable in class nxopen.cae.responsesimulation.DDAMExcitation.MountingType
ductAreaExp() - Method in interface nxopen.routing.DuctSizeCalculatorBuilder: Returns the duct area
License requirements: routing_hvac ("Routing HVAC")
.
ductAspectRatioExp() - Method in interface nxopen.routing.DuctSizeCalculatorBuilder: Returns the Aspect ratio of the duct dimentions
License requirements: routing_hvac ("Routing HVAC")
.
ductDiameterExp() - Method in interface nxopen.routing.DuctSizeCalculatorBuilder: Returns the duct diameter
License requirements: routing_hvac ("Routing HVAC")
.
ductEqvalentDiameterExp() - Method in interface nxopen.routing.DuctSizeCalculatorBuilder: Returns the duct equivalent diameter
License requirements: routing_hvac ("Routing HVAC")
.
ductHeightExp() - Method in interface nxopen.routing.DuctSizeCalculatorBuilder: Returns the duct height
License requirements: routing_hvac ("Routing HVAC")
.
DuctReinforcement - Interface in nxopen.routing: Represents a Duct Reinforcement feature used for creating/editing reinforcements on the inside or outside of rectangular HVAC ducts.
DuctReinforcementBuilder - Interface in nxopen.routing: Builder for creating/editing duct reinforcements.
DuctReinforcementBuilder.ReinforcementTypes - Class in nxopen.routing: Specifies the type of duct reinforcements.
ductShape() - Method in interface nxopen.routing.DuctSizeCalculatorBuilder: Returns the shape of the duct
License requirements: routing_hvac ("Routing HVAC")
.
DuctSizeCalculatorBuilder - Interface in nxopen.routing: Builder to perform calculations of the duct which is to be used in the HVAC applications.
DuctSizeCalculatorBuilder.DuctShapeType - Class in nxopen.routing: This enum represents the shape of the duct
ductWidthExp() - Method in interface nxopen.routing.DuctSizeCalculatorBuilder: Returns the duct width
License requirements: routing_hvac ("Routing HVAC")
.
dueDate() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder: Returns the due date
License requirements: None.
dueDate() - Method in interface nxopen.features.shipdesign.PenetrationReviewRequestBuilder: Returns the due date
License requirements: None.
dueDate() - Method in interface nxopen.issue.IssueContent: Returns the due date
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.
dueDate() - Method in interface nxopen.issue.IssueContentBuilder: Returns the due date
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.
DUHAMELD_INTEGRAL - Static variable in class nxopen.cae.responsesimulation.EvaluationParameters.AnalysisIntegrationMethod
DUMB - Static variable in class nxopen.ApparentChainingRuleType: Dumb Curves
DUMB_COPY - Static variable in class nxopen.routing.RoutePartDescriptor.SourceType
dummyScale() - Method in interface nxopen.fields.DisplayPropertiesBuilder: Returns the dummy scale
License requirements: None.
dump() - Method in interface nxopen.sim.SimDebugBuilder: Returns the dump
License requirements: None.
dumpMidsurfFacepairReport(String, Tag) - Method in interface nxopen.uf.UFModlFeatures: Refer to UF_MODL_dump_midsurf_facepair_report for documentation.
dumpOutput() - Method in interface nxopen.sim.SimDebugBuilder: Returns the dump output
License requirements: None.
dumpToFileName() - Method in interface nxopen.sim.SimDebugBuilder: Returns the output filename
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
dumpValidationInfo(String) - Method in interface nxopen.pdm.SessionSettings: Dump the validation info .This API can be used to expose the current state from the UGMGR session, typically the information about the session,assembly,components,their states etc.
DupinBuilder - Interface in nxopen.geometricanalysis: The Dupin Indicatrix is a tool to geometrically display the surface curvature at a specified point on a surface.
dupinIndicatrix() - Method in interface nxopen.features.shipdesign.RollingLineBuilder: Returns the dupin indicatrix for surface analysis.
duplicate(Tag, String) - Method in interface nxopen.uf.UFParam: Refer to UF_PARAM_duplicate for documentation.
DUPLICATE_VIEW - Static variable in class nxopen.drawings.DraftingViewCollection.ViewCopyDetailOption: duplicate view
duplicateCheck() - Method in interface nxopen.weld.WeldJointBuilder: Returns the indication to not allow new joints to be created if they are duplicates of exising joints
License requirements: None.
duplicateElementGroupsCount() - Method in interface nxopen.cae.modelcheck.DuplicateElementsCheckBuilder: Returns the duplicate elements group count, each group contains elements that are duplicates of each other and each group contains at least two duplicate elements
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
DuplicateElementsCheckBuilder - Interface in nxopen.cae.modelcheck: Represents a DuplicateElementsCheckBuilder to check for duplicate elements within the candidate elements.
DuplicateElementsCheckBuilder.DeletePreference - Class in nxopen.cae.modelcheck: Represents the duplicate elements deleting preference
DuplicateElementsCheckBuilder.DisplaySettings - Class in nxopen.cae.modelcheck: Represents the display settings of duplicated elements detected
duplicateNodeGroupsCount() - Method in interface nxopen.cae.modelcheck.DuplicateNodesCheckBuilder: Returns the duplicate nodes group count, each group contains nodes that are duplicates of each other and each group contains at least two duplicate nodes
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
DuplicateNodesCheckBuilder - Interface in nxopen.cae.modelcheck: Represents a DuplicateNodesCheckBuilder to check for duplicate nodes within the candidate nodes.
DuplicateNodesCheckBuilder.DisplaySettings - Class in nxopen.cae.modelcheck: Represents the display settings data
DuplicateNodesCheckBuilder.ListOption - Class in nxopen.cae.modelcheck: Represents the duplicate nodes merging preference
DuplicateNodesCheckBuilder.MergePreference - Class in nxopen.cae.modelcheck: Represents the duplicate nodes merging preference
duplicatesAllowed() - Method in interface nxopen.annotations.SelectAnnotationList: Returns whether duplicate objects are allowed in the selection list.
duplicatesAllowed() - Method in interface nxopen.annotations.SelectBaseCustomSymbolList: Returns whether duplicate objects are allowed in the selection list.
duplicatesAllowed() - Method in interface nxopen.annotations.SelectOrdinateDimensionList: Returns whether duplicate objects are allowed in the selection list.
duplicatesAllowed() - Method in interface nxopen.annotations.SelectTableSectionList: Returns whether duplicate objects are allowed in the selection list.
duplicatesAllowed() - Method in interface nxopen.assemblies.SelectComponentList: Returns whether duplicate objects are allowed in the selection list.
duplicatesAllowed() - Method in interface nxopen.cae.SelectCAEBodyList: Returns whether duplicate objects are allowed in the selection list.
duplicatesAllowed() - Method in interface nxopen.cae.SelectCAEEdgeList: Returns whether duplicate objects are allowed in the selection list.
duplicatesAllowed() - Method in interface nxopen.cae.SelectCAEFaceList: Returns whether duplicate objects are allowed in the selection list.
duplicatesAllowed() - Method in interface nxopen.cae.SelectFEElemFaceList: Returns whether duplicate objects are allowed in the selection list.
duplicatesAllowed() - Method in interface nxopen.cae.SelectFENodeList: Returns whether duplicate objects are allowed in the selection list.
duplicatesAllowed() - Method in interface nxopen.cae.SelectMeshList: Returns whether duplicate objects are allowed in the selection list.
duplicatesAllowed() - Method in interface nxopen.cam.SelectCAMFeatureList: Returns whether duplicate objects are allowed in the selection list.
duplicatesAllowed() - Method in interface nxopen.drawings.SelectDraftingViewList: Returns whether duplicate objects are allowed in the selection list.
duplicatesAllowed() - Method in interface nxopen.drawings.SelectDrawingViewList: Returns whether duplicate objects are allowed in the selection list.
duplicatesAllowed() - Method in interface nxopen.facet.SelectFacetedBodyList: Returns whether duplicate objects are allowed in the selection list.
duplicatesAllowed() - Method in interface nxopen.features.SelectDatumCsysList: Returns whether duplicate objects are allowed in the selection list.
duplicatesAllowed() - Method in interface nxopen.features.SelectFeatureList: Returns whether duplicate objects are allowed in the selection list.
duplicatesAllowed() - Method in interface nxopen.layout2d.SelectComponentList: Returns whether duplicate objects are allowed in the selection list.
duplicatesAllowed() - Method in interface nxopen.mechatronics.SelectCollisionSensorList: Returns whether duplicate objects are allowed in the selection list.
duplicatesAllowed() - Method in interface nxopen.mechatronics.SelectLogicObjectList: Returns whether duplicate objects are allowed in the selection list.
duplicatesAllowed() - Method in interface nxopen.SelectBodyList: Returns whether duplicate objects are allowed in the selection list.
duplicatesAllowed() - Method in interface nxopen.SelectCoordinateSystemList: Returns whether duplicate objects are allowed in the selection list.
duplicatesAllowed() - Method in interface nxopen.SelectCurveList: Returns whether duplicate objects are allowed in the selection list.
duplicatesAllowed() - Method in interface nxopen.SelectDatumPlaneList: Returns whether duplicate objects are allowed in the selection list.
duplicatesAllowed() - Method in interface nxopen.SelectDisplayableObjectList: Returns whether duplicate objects are allowed in the selection list.
duplicatesAllowed() - Method in interface nxopen.SelectEdgeList: Returns whether duplicate objects are allowed in the selection list.
duplicatesAllowed() - Method in interface nxopen.SelectExpressionList: Returns whether duplicate objects are allowed in the selection list.
duplicatesAllowed() - Method in interface nxopen.SelectFaceList: Returns whether duplicate objects are allowed in the selection list.
duplicatesAllowed() - Method in interface nxopen.SelectIBaseCurveList: Returns whether duplicate objects are allowed in the selection list.
duplicatesAllowed() - Method in interface nxopen.SelectIBasePlaneList: Returns whether duplicate objects are allowed in the selection list.
duplicatesAllowed() - Method in interface nxopen.SelectICurveList: Returns whether duplicate objects are allowed in the selection list.
duplicatesAllowed() - Method in interface nxopen.SelectINXObjectList: Returns whether duplicate objects are allowed in the selection list.
duplicatesAllowed() - Method in interface nxopen.SelectIParameterizedSurfaceList: Returns whether duplicate objects are allowed in the selection list.
duplicatesAllowed() - Method in interface nxopen.SelectNXObjectList: Returns whether duplicate objects are allowed in the selection list.
duplicatesAllowed() - Method in interface nxopen.SelectObjectList: Returns whether duplicate objects are allowed in the selection list.
duplicatesAllowed() - Method in interface nxopen.SelectPartList: Returns whether duplicate objects are allowed in the selection list.
duplicatesAllowed() - Method in interface nxopen.SelectPlaneList: Returns whether duplicate objects are allowed in the selection list.
duplicatesAllowed() - Method in interface nxopen.SelectPointList: Returns whether duplicate objects are allowed in the selection list.
duplicatesAllowed() - Method in interface nxopen.SelectSplineList: Returns whether duplicate objects are allowed in the selection list.
duplicatesAllowed() - Method in interface nxopen.SelectTaggedObjectList: Returns whether duplicate objects are allowed in the selection list.
DUR_EVENT_INFO - Static variable in class nxopen.uf.UFSf.ScenarioInfo
DurabilityAxisSearch - Interface in nxopen.cae: Represents a DurabilityAxisSearch .
DurabilityAxisSearchCollection - Interface in nxopen.cae: Represents a collection of stress axes.
DurabilityDamageEvaluationBuilder - Interface in nxopen.cae: Represents the builder for evaluating durability damage.
DurabilityDamageEvaluationBuilder.BwiWeldClassEnum - Class in nxopen.cae: the BWi Weld Class Enum.
DurabilityDamageEvaluationBuilder.CyclicStressStrainModelEnum - Class in nxopen.cae: the cyclic stress strain model.
DurabilityDamageEvaluationBuilder.EquivalentStressMethodEnum - Class in nxopen.cae: the equivalent stress method.
DurabilityDamageEvaluationBuilder.FatigueLifeCriterionEnum - Class in nxopen.cae: the fatigue life criterion.
DurabilityDamageEvaluationBuilder.ProbabilityOptionEnum - Class in nxopen.cae: the Probability Option.
DurabilityDataControlBuilder - Interface in nxopen.cae: Represents a builder class for the transient event data control.
DurabilityDataControlBuilder.TimeExtentsEnum - Class in nxopen.cae: the time extents enum.
DurabilityEvaluateFatigueHistoryBuilder - Interface in nxopen.cae: Represents the builder for evaluating fatigue histories.
DurabilityEvaluateFatigueHistoryBuilder.FatigueHistoryDataTypeEnum - Class in nxopen.cae: Fatigue history data type: as per event, stress or strain
DurabilityEvent - Interface in nxopen.cae: Represents a DurabilityEvent , which is an event of a durability solution process.
DurabilityEventBuilder - Interface in nxopen.cae: Represents the abstract builder class for all durability events.
DurabilityEventCollection - Interface in nxopen.cae: Represents a collection of durability events.
DurabilityEventFatigueSettingsBuilder - Interface in nxopen.cae: Represents a builder class for the event fatigue settings.
DurabilityEventFatigueSettingsBuilder.BwiWeldClassEnum - Class in nxopen.cae: the BWi Weld Class Enum.
DurabilityEventFatigueSettingsBuilder.CyclicStressStrainModelEnum - Class in nxopen.cae: the cyclic stress strain model enum.
DurabilityEventFatigueSettingsBuilder.EquivalentStressMethodEnum - Class in nxopen.cae: the equivalent stress method enum.
DurabilityEventFatigueSettingsBuilder.FatigueLifeCriterionEnum - Class in nxopen.cae: the fatigue life criterion enum.
DurabilityEventFatigueSettingsBuilder.FatigueSafetyFactorMethodEnum - Class in nxopen.cae: the Fatigue Safety Factor Method Enum.
DurabilityEventFatigueSettingsBuilder.FatigueSafetyFactorOutputEnum - Class in nxopen.cae: the Fatigue Safety Factor Output Enum.
DurabilityEventFatigueSettingsBuilder.MaximumAlternatingStressEnum - Class in nxopen.cae: the Maximum Alternating Stress Enum.
DurabilityEventFatigueSettingsBuilder.OrthotropicFatigueCriterionEnum - Class in nxopen.cae: the Orthotropic Fatigue Criterion.
DurabilityEventFatigueSettingsBuilder.OrthotropicMeanStressEnum - Class in nxopen.cae: the Orthotropic Mean Stress.
DurabilityEventFatigueSettingsBuilder.ProbabilityOptionEnum - Class in nxopen.cae: the Probability Option.
DurabilityEventOverridesBuilder - Interface in nxopen.cae: Represents a builder class for Event Overrides.
DurabilityEventOverridesBuilder.UseElementsEnum - Class in nxopen.cae: the use elements enum.
DurabilityEventSolverBuilder - Interface in nxopen.cae: Represents the builder for solving the durability event.
DurabilityEventSolverBuilder.SubmitOptionsEnum - Class in nxopen.cae: the submit options enum.
DurabilityEventStrengthSettingsBuilder - Interface in nxopen.cae: Represents a builder class for the event strength settings.
DurabilityEventStrengthSettingsBuilder.OrthotropicFailureCriterionEnum - Class in nxopen.cae: the orthotropic Failure criterion enum.
DurabilityEventStrengthSettingsBuilder.StressCriterionEnum - Class in nxopen.cae: the stress criterion enum.
DurabilityEventStrengthSettingsBuilder.StressTypeEnum - Class in nxopen.cae: the stress type enum.
DurabilityExcitation - Interface in nxopen.cae: Represents a DurabilityExcitation .
DurabilityExcitationBuilder - Interface in nxopen.cae: Represents the abstract builder class for all durability excitations.
DurabilityExcitationCollection - Interface in nxopen.cae: Represents a collection of durability excitations.
DurabilityFatigue - Interface in nxopen.cae: Represents a DurabilityFatigue .
DurabilityFatigueCollection - Interface in nxopen.cae: Represents a collection of event fatigue settings.
DurabilityFunctionExcitation - Interface in nxopen.cae: Represents a DurabilityFunctionExcitation .
DurabilityFunctionExcitationBuilder - Interface in nxopen.cae: Represents a DurabilityFunctionExcitation builder.
DurabilityLoadPattern - Interface in nxopen.cae: Represents a DurabilityLoadPattern .
DurabilityLoadPatternBuilder - Interface in nxopen.cae: Represents a CAE.DurabilityLoadPattern builder.
DurabilityLoadPatternBuilder.PatternTypeEnum - Class in nxopen.cae: the pattern type.
DurabilityManager - Interface in nxopen.cae: Represents the durability manager that contains all durability objects.
durabilityManager() - Method in interface nxopen.cae.SimSimulation: Returns the durability manager belonging to this sim part .
DurabilityMetaSolution - Interface in nxopen.cae: Represents a DurabilityMetaSolution .
DurabilityMetaSolutionBuilder - Interface in nxopen.cae: Represents a DurabilityMetaSolution builder.
DurabilityMetaSolutionCollection - Interface in nxopen.cae: Represents a collection of correl meta solution.
DurabilityRandomEvent - Interface in nxopen.cae: Represents a DurabilityRandomEvent .
DurabilityRandomEventBuilder - Interface in nxopen.cae: Represents the builder for the random durability event.
DurabilityRandomFatigue - Interface in nxopen.cae: Represents a DurabilityRandomFatigue .
DurabilityRandomFatigueBuilder - Interface in nxopen.cae: Represents a builder class for the event fatigue settings.
DurabilityRandomFatigueBuilder.RandomFatigueMethodEnum - Class in nxopen.cae: the random method.
DurabilityRandomFatigueCollection - Interface in nxopen.cae: Represents a collection of random fatigue.
DurabilityResultPath - Interface in nxopen.cae: Represents a DurabilityResultPath .
DurabilityResultPathBuilder - Interface in nxopen.cae: Represents a DurabilityResultPath builder.
DurabilitySolveOptions - Interface in nxopen.cae: Represents a DurabilitySolveOptions .
DurabilitySolveOptionsCollection - Interface in nxopen.cae: Represents a collection of correl meta solution.
DurabilitySolverBuilder - Interface in nxopen.cae: Represents the builder for solving the durability solution process.
DurabilitySolverBuilder.ActiveEventSolveOptionsEnum - Class in nxopen.cae: the active event solve options enum.
DurabilitySolverBuilder.SubmitOptionsEnum - Class in nxopen.cae: the submit options enum.
DurabilityStaticEvent - Interface in nxopen.cae: Represents a DurabilityStaticEvent .
DurabilityStaticEventBuilder - Interface in nxopen.cae: Represents the builder for the static durability event.
DurabilityStaticEventBuilder.ExcitationTypeEnum - Class in nxopen.cae: the static excitation type.
DurabilityStrainGageAnalyzerBuilder - Interface in nxopen.cae: Represents the builder for analyzing strain gage data.
DurabilityStrainGageAnalyzerBuilder.AxisDirectionSearchMethodEnum - Class in nxopen.cae: the axis direction search enum.
DurabilityStrainGageAnalyzerBuilder.CriticalPlaneOptionEnum - Class in nxopen.cae: the critical plane option enum.
DurabilityStrainGageAnalyzerBuilder.GageConstructionEnum - Class in nxopen.cae: the gage construction enum.
DurabilityStrainGageAnalyzerBuilder.GageSourceEnum - Class in nxopen.cae: the gage source enum.
DurabilityStrainGageAnalyzerBuilder.GageTypeEnum - Class in nxopen.cae: the gage type enum.
DurabilityStrength - Interface in nxopen.cae: Represents a DurabilityStrength .
DurabilityStrengthCollection - Interface in nxopen.cae: Represents a collection of event strength settings.
DurabilityStressAxesBuilder - Interface in nxopen.cae: Represents a builder class for the event fatigue settings.
DurabilityStressAxesBuilder.BeamStressEnum - Class in nxopen.cae: the Beam Stress Enum
DurabilityStressAxesBuilder.ElementFaceStressAxisEnum - Class in nxopen.cae: the Element Face Stress Axis Enum.
DurabilityStressAxesBuilder.NodeElementOptionEnum - Class in nxopen.cae: the Node Element Option Enum.
DurabilityStressAxesBuilder.ShellRegionEnum - Class in nxopen.cae: the Shell Region Enum.
DurabilityStressAxesBuilder.StressAxisDirectionSearchMethodEnum - Class in nxopen.cae: the Stress Axis Direction Method Search Enum.
DurabilityStressAxesBuilder.StressAxisMethodEnum - Class in nxopen.cae: the Stress Axis Method Enum.
DurabilityTransientEvent - Interface in nxopen.cae: Represents a DurabilityTransientEvent .
DurabilityTransientEventBuilder - Interface in nxopen.cae: Represents the builder for the transient durability event.
duration() - Method in interface nxopen.cae.responsesimulation.RSEventAttributes: Returns the time duration in second for transient event
License requirements: nx_response_anlys ("NX Response Analysis")
.
duration() - Method in interface nxopen.mechatronics.GanttOperationBuilder: Returns the operation duration
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
durationOption() - Method in interface nxopen.cae.responsesimulation.RSEventAttributes: Returns the time duration optionin option for transient event
License requirements: None.
durations - Variable in class nxopen.uf.UFAssem.AskStepElementDurationsData
dursolAddLoadNx(Tag, Tag) - Method in interface nxopen.uf.UFSf: Refer to UF_SF_dursol_add_load_nx for documentation.
dursolAskLoadCountNx(Tag) - Method in interface nxopen.uf.UFSf: Refer to UF_SF_dursol_ask_load_count_nx for documentation.
dursolAskLoadNx(Tag, int) - Method in interface nxopen.uf.UFSf: Refer to UF_SF_dursol_ask_load_nx for documentation.
dursolLocateAllMembersNx(Tag) - Method in interface nxopen.uf.UFSf: Refer to UF_SF_dursol_locate_all_members_nx for documentation.
DursolLocateAllMembersNxData() - Constructor for class nxopen.uf.UFSf.DursolLocateAllMembersNxData
dursolName - Variable in class nxopen.uf.UFSf.AskDursolNxData
dursolRemoveLoadNx(Tag, Tag) - Method in interface nxopen.uf.UFSf: Refer to UF_SF_dursol_remove_load_nx for documentation.
dVecDir - Variable in class nxopen.uf.UFModl.SmslotData
DvToMvMapping - Interface in nxopen.features.shipdesign: Represents a plate feature
To create or edit an instance of this class, use DvToMvMappingBuilder

Created in NX8.5.0
DvToMvMappingBuilder - Interface in nxopen.features.shipdesign: Represents a DvToMvMapping builder.
dwell() - Method in interface nxopen.cam.Cycle: Returns the dwell type
License requirements: None.
dwell() - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder: Returns the Dwell Time or Revolutions
License requirements: None.
DWELL_REVOLUTIONS - Static variable in class nxopen.uf.UFPath.DwellUnit
DWELL_SECONDS - Static variable in class nxopen.uf.UFPath.DwellUnit
DWELL_UNIT_LAST_ELEMENT - Static variable in class nxopen.uf.UFPath.DwellUnit
dwellFinal() - Method in interface nxopen.cam.Cycle: Returns the dwell final type
License requirements: None.
dwellFinalValue() - Method in interface nxopen.cam.Cycle: Returns the dwell final value
License requirements: None.
dwellStart() - Method in interface nxopen.cam.Cycle: Returns the dwell start type
License requirements: None.
dwellStartValue() - Method in interface nxopen.cam.Cycle: Returns the dwell start value
License requirements: None.
dwellType() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder: Returns the dwell type
License requirements: None.
dwellUnit() - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder: Returns the Dwell Unit type
License requirements: None.
dwellValue() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder: Returns the dwell value
License requirements: None.
dwellValue() - Method in interface nxopen.cam.Cycle: Returns the dwell value
License requirements: None.
DWG - Static variable in class nxopen.DxfdwgCreator.OutputFileTypeOption: export data to DWG format
DWG_LINE - Static variable in class nxopen.uf.UFDrf.AssocLineType
DWG_POS - Static variable in class nxopen.uf.UFDrf.AssocType
DXF - Static variable in class nxopen.DxfdwgCreator.OutputFileTypeOption: export data to DXF format
DXF - Static variable in class nxopen.features.sheetmetal.ExportFlatPatternBuilder.FileType: DXF Export
DxfdwgCreator - Interface in nxopen: Represents a DxfdwgCreator to be used when exporting the DXF/DWG Data This class is created using DexManager .
DxfdwgCreator.AutoCADRevisionOptions - Class in nxopen: AutoCad Revision option
DxfdwgCreator.ExportAsOption - Class in nxopen: Exprot As option
DxfdwgCreator.ExportDataOption - Class in nxopen: Exprot Data option
DxfdwgCreator.ExportFacesAsOptions - Class in nxopen: Export Faces As option
DxfdwgCreator.ExportFromOption - Class in nxopen: Exprot From option
DxfdwgCreator.ExportSplinesAsOptions - Class in nxopen: Export Faces As option
DxfdwgCreator.OutputFileTypeOption - Class in nxopen: Output File Type option
DxfdwgCreator.OutputToOption - Class in nxopen: Output To Option
DxfdwgCreator.WidthfactorMethodOptions - Class in nxopen: AutoCad widthfactor calculation options
DxfdwgImporter - Interface in nxopen: Represents a DxfdwgImporter to be used when importing the DXF/DWG Data This class is created using DexManager .
DxfdwgImporter.AspectRatioOptions - Class in nxopen: NX Aspect ratio calculation options
DxfdwgImporter.ConvLayoutsAs - Class in nxopen: Convert latouts option
DxfdwgImporter.ImportBlocksAs - Class in nxopen: Import Blocks as option option
DxfdwgImporter.ImportCurvesAs - Class in nxopen: Import curves as option
DxfdwgImporter.ImportDimensionsAs - Class in nxopen: Import Dimensions as option option
DxfdwgImporter.ImportPolylinesAs - Class in nxopen: Import Polylines as option
DxfdwgImporter.ImportToEnum - Class in nxopen: Import To option
DxfdwgImporter.ProcessingOrderAs - Class in nxopen: Processing Oder of non numeric layers
DxfdwgImporter.SendLayoutsAs - Class in nxopen: Send Layouts data to option
DxfdwgImporter.SendModelDataAs - Class in nxopen: Send Model data to option
DxfdwgImporter.UnitsEnum - Class in nxopen: Import To option
dxfRevision() - Method in interface nxopen.features.sheetmetal.ExportFlatPatternBuilder: Returns the dxf revision.
dxIncrement() - Method in interface nxopen.tooling.StandardPartPositionBuilder: Returns the increment in X direction when a standard part is dragged.
dyIncrement() - Method in interface nxopen.tooling.StandardPartPositionBuilder: Returns the increment in Y direction when a standard part is dragged.
DYNAMIC - Static variable in class nxopen.cam.LaserControlPoint.HeadOrientTypes: Dynamic
DYNAMIC - Static variable in class nxopen.cam.LaserHeadOrientation.Types: Dynamic
DYNAMIC - Static variable in class nxopen.cam.ToolAxisFixed.Types: Dynamic
DYNAMIC - Static variable in class nxopen.display.NonProportionalZoom.MethodType: Defines a line to define aspect ratio of non-proportional zoom.
DYNAMIC - Static variable in class nxopen.drawings.SectionViewBuilder.SectionViewModeType
DYNAMIC - Static variable in class nxopen.geometricanalysis.GeometricProperties.OutputType: Properties of an entity are displayed first on the dialog itself on mouse over.
DYNAMIC - Static variable in class nxopen.geometricutilities.ModlMotion.Options: Move by Dynamic
DYNAMIC - Static variable in class nxopen.motion.MotionSolutionBuilder.AnalysisTypes: Dynamic or Kinematic analysis
DYNAMIC_DRAG - Static variable in class nxopen.HumanData.InverseKinematicsType: Indicate dynamic drag type of inverse kinematics
DYNAMIC_FREQUENCY - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response: Eigenfrequency from modal analysis
DYNAMIC_FREQUENCY_KRESSISSEL - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response: Eigenfrequency calculated with Kreisselmaier-Steinhauser formula
DYNAMIC_MEMORY_EXHAUSTED - Static variable in class nxopen.uf.UFConstants
DYNAMIC_PLANE - Static variable in class nxopen.features.subdivision.SubdivisionProjectCageBuilder.TargetTypes
DYNAMIC_RESPONSE - Static variable in class nxopen.cae.responsesimulation.RSEvent.ResultFileType: Result file to contain dynamic response evaluation results, which extension is ".rs2"
DYNAMIC_VISCOSITY - Static variable in class nxopen.cae.Result.Quantity
dynamicAlignment() - Method in interface nxopen.preferences.SessionDrafting: Returns the dynamic alignment flag.
dynamicAlignmentInGlobalSelection() - Method in interface nxopen.annotations.CommonWorkflowBuilder: Returns the dynamic alignment in global selection determines whether drafting annotations and dimensions will automatically align or not when moving them in Global Selection.
dynamicCoefficient() - Method in interface nxopen.motion.BodyContactAdams: Deprecated.
Deprecated in NX8.0.0. Obtion the exression using BodyContactAdams.dynamicCoefficientExpression() to query or edit it.
dynamicCoefficient() - Method in interface nxopen.motion.BodyContactLms: Returns the dynamic coefficient
License requirements: None.
dynamicCoefficient() - Method in interface nxopen.motion.BodyContactRecurdyn: Deprecated.
Deprecated in NX8.0.0. Obtain the expression using BodyContactRecurdyn.dynamicCoefficientExpression() to query or edit it.
dynamicCoefficient() - Method in interface nxopen.motion.CurveContactAdams: Deprecated.
Deprecated in NX8.0.0. Obtain the expression using CurveContactAdams.dynamicCoefficientExpression() to query or edit it.
dynamicCoefficient() - Method in interface nxopen.motion.CurveContactRecurdyn: Deprecated.
Deprecated in NX8.0.0. Obtain the expression using CurveContactRecurdyn.dynamicCoefficientExpression() to query or edit it.
dynamicCoefficientExpression() - Method in interface nxopen.motion.BodyContactAdams: Returns the dynamic coefficient
License requirements: None.
dynamicCoefficientExpression() - Method in interface nxopen.motion.BodyContactRecurdyn: Returns the dynamic coefficient expression
License requirements: None.
dynamicCoefficientExpression() - Method in interface nxopen.motion.CurveContactAdams: Returns the dynamic coefficient expression
License requirements: None.
dynamicCoefficientExpression() - Method in interface nxopen.motion.CurveContactRecurdyn: Returns the dynamic coefficient expression
License requirements: None.
dynamicConstraintDisplay() - Method in interface nxopen.preferences.SessionSketch: Returns the dynamic constraints display flag.
dynamicCsysOrientation() - Method in interface nxopen.tooling.ReusableObjectPasteBuilder: Returns the orientation of dynamic csys
License requirements: None.
dynamicCsysOrigin() - Method in interface nxopen.tooling.ReusableObjectPasteBuilder: Returns the origin of dynamic csys
License requirements: None.
DynamicCurb - Interface in nxopen.features.vehicledesign: Represents a dynamic curb feature
To create or edit an instance of this class, use DynamicCurbBuilder

Created in NX8.5.0
DynamicCurbBuilder - Interface in nxopen.features.vehicledesign: Represents a DynamicCurb builder
To create a new instance of this class, use nxopen.features.vehicledesignCollection#createDynamicCurbBuilder
Default values.
DynamicCurbBuilder.MethodType - Class in nxopen.features.vehicledesign: Represents the type of inner line to create dynamic curb.
DynamicCurbBuilder.PositionType - Class in nxopen.features.vehicledesign: Represents the dynamic curb positions.
DynamicCurbBuilder.RequirementsControlType - Class in nxopen.features.vehicledesign: Represents the requirements control types to define the dynamic curb.
DynamicCurbBuilder.VisualizationType - Class in nxopen.features.vehicledesign: Represents the visualization types of the output.
DynamicCurbBuilder.WheelType - Class in nxopen.features.vehicledesign: Represents the type of the wheel size option for dynamic curb.
dynamicErrorTolerance() - Method in interface nxopen.motion.RecurdynSolverProperty: Deprecated.
Deprecated in NX8.5.0. Obtion the expression using RecurdynSolverProperty.dynamicErrorToleranceExpression() to query or edit it.
dynamicErrorToleranceExpression() - Method in interface nxopen.motion.RecurdynSolverProperty: Returns the dynamic error tolerance expression
License requirements: None.
DynamicEvaluationOutputSettings - Interface in nxopen.cae.responsesimulation: Represents the output setting for dynamic response evaluation .
dynamicEvent() - Method in interface nxopen.cae.responsesimulation.ExcitationBuilder: Returns the parent dynamic event object
License requirements: nx_response_anlys ("NX Response Analysis")
.
dynamicEventName() - Method in interface nxopen.cae.LaminateDynamicEventBuilder: Returns the event name
License requirements: None.
dynamicEvents() - Method in interface nxopen.cae.LaminateDynamicSim: Returns the dynamic event collection belonging to this dynamic sim .
dynamicFriction() - Method in interface nxopen.mechatronics.CollisionMaterialBuilder: Returns the dynamic friction.
dynamicFriction() - Method in interface nxopen.mechatronics.PreferencesBuilder: Deprecated.
Deprecated in NX9.0.0. Use nxopen.mechatronics.PreferencesBuilder#get_DynamicFrictionExpression instead
dynamicFriction - Variable in class nxopen.uf.UFMotion.ContactParameters
dynamicFrictionExpression() - Method in interface nxopen.mechatronics.PreferencesBuilder: Returns the Dynamic Friction Expression
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
dynamicInitialStepSize() - Method in interface nxopen.motion.RecurdynSolverProperty: Deprecated.
Deprecated in NX8.5.0. Obtion the expression using RecurdynSolverProperty.dynamicInitialStepSizeExpression() to query or edit it.
dynamicInitialStepSizeExpression() - Method in interface nxopen.motion.RecurdynSolverProperty: Returns the dynamic initial step size expression
License requirements: None.
dynamicInitialVelocityMethod() - Method in interface nxopen.motion.LmsSolverProperty: Returns the dynamic initial velocity method
License requirements: None.
dynamicIntegrationTolerance() - Method in interface nxopen.motion.LmsSolverProperty: Returns the dynamic integration tolerance
License requirements: None.
dynamicLabel() - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder: Returns the constraint manager
License requirements: None.
dynamicMaxIntegrationStep() - Method in interface nxopen.motion.LmsSolverProperty: Returns the dynamic max interation step
License requirements: None.
dynamicMaxKinIteration() - Method in interface nxopen.motion.RecurdynSolverProperty: Returns the Maximum kinematic iteration
License requirements: None.
dynamicMaxStepSize() - Method in interface nxopen.motion.RecurdynSolverProperty: Deprecated.
Deprecated in NX8.5.0. Obtion the expression using RecurdynSolverProperty.dynamicMaxStepSizeExpression() to query or edit it.
dynamicMaxStepSizeExpression() - Method in interface nxopen.motion.RecurdynSolverProperty: Returns the dynamic max step size expression
License requirements: None.
dynamicNumericalDamping() - Method in interface nxopen.motion.RecurdynSolverProperty: Deprecated.
Deprecated in NX8.5.0. Obtion the expression using RecurdynSolverProperty.dynamicNumericalDampingExpression() to query or edit it.
dynamicNumericalDampingExpression() - Method in interface nxopen.motion.RecurdynSolverProperty: Returns the dynamic numerical damping expression
License requirements: None.
dynamicProjection() - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder: Returns the dynamic projection
License requirements: None.
dynamicProjection() - Method in interface nxopen.geometricanalysis.SurfaceIntersectionBuilder: Returns the dynamic projection
License requirements: None.
dynamicRayTracedStudioTilingQuality() - Method in interface nxopen.display.RayTracedStudioEditorBuilder: Returns the Ray Traced Studio tiling quality during interactive dynamic display
License requirements: None.
DynamicResultEvaluationSetting - Interface in nxopen.cae.responsesimulation: Represents the abstract class of evaluation setting for all dynamic results evaluations.
DynamicResultEvaluationSettingBuilder - Interface in nxopen.cae.responsesimulation: Represents the abstract builder class of evaluation setting for all dynamic results evaluations.
DYNAMICS - Static variable in class nxopen.motion.MotionEnvironment.Analysis: Dynamics analysis type
DynamicSection - Interface in nxopen.display: Represents a dynamic section
To create or edit an instance of this class, use DynamicSectionBuilder

Created in NX6.0.0
DynamicSectionBuilder - Interface in nxopen.display: Represents a Dynamic Section Builder used for creating sections.
DynamicSectionBuilder.ActivePlaneData - Class in nxopen.display: This class holds the data returned from DynamicSectionBuilder.getActivePlane()
DynamicSectionBuilder.LoadAllIntersectingData - Class in nxopen.display: This class holds the data returned from DynamicSectionBuilder.loadAllIntersecting()
DynamicSectionBuilder.OffsetLimitsData - Class in nxopen.display: This class holds the data returned from DynamicSectionBuilder.getOffsetLimits()
DynamicSectionCollection - Interface in nxopen.display: Represents a collection of dynamic section objects
To obtain an instance of this class, refer to BasePart

Created in NX6.0.0
DynamicSectionCut - Interface in nxopen.display: Represents a dynamic section-cut generated by sectioning an object such as a IBody or a Component .
dynamicSections() - Method in interface nxopen.BasePart: Returns the Display.DynamicSectionCollection instance belonging to this part
Created in NX6.0.0
DynamicSectionTypes - Interface in nxopen.display: Represents a enumerations used by Dynamic Section Builder.
DynamicSectionTypes.ActivePlane - Class in nxopen.display: Specifies active clip plane in the active plane pair.
DynamicSectionTypes.Axis - Class in nxopen.display: Specifies axis.
DynamicSectionTypes.CapColorOption - Class in nxopen.display: Specifies cap color type to be used for the cap.
DynamicSectionTypes.Clip - Class in nxopen.display: Specifies clipping type.
DynamicSectionTypes.CoordinateSystem - Class in nxopen.display: Specifies the coordinate system used for creating principal planes i.e.
DynamicSectionTypes.CurveColorOption - Class in nxopen.display: Specifies the color of the curves created by the section plane.
DynamicSectionTypes.Type - Class in nxopen.display: Specifies different type of sectioning.
dynamicSims() - Method in interface nxopen.cae.LaminateManager: Returns the dynamic sim collection belonging to this sim part .
dynamicSolutionTolerance() - Method in interface nxopen.motion.LmsSolverProperty: Returns the dynamic solution tolerance
License requirements: None.
dynamicSolverAccelerationMethod() - Method in interface nxopen.motion.LmsSolverProperty: Returns the dynamic solver acceleration method
License requirements: None.
dynamicUpdate() - Method in interface nxopen.preferences.SessionModeling: Returns the dynamic update.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z _