public interface InspectionMethodBuilder extends MethodBuilder
nxopen.cam.InspectionGroupCollection#createInspectionMethodBuilder
Modifier and Type | Interface and Description |
---|---|
static class |
InspectionMethodBuilder.AxisExtrapolationTypes
the analysis axis extrapolation type
|
static class |
InspectionMethodBuilder.CylinderFittingTypes
the analysis cylinder/circle fitting type
|
static class |
InspectionMethodBuilder.DatumPlaneFittingTypes
the analysis datum plane fitting type
|
static class |
InspectionMethodBuilder.InspectionModes
CMM Inspection modes.
|
static class |
InspectionMethodBuilder.LimitsOfSizeTypes
the analysis limits of size fitting type
|
static class |
InspectionMethodBuilder.MethodTypes
CMM Inspection method feature type.
|
static class |
InspectionMethodBuilder.OperationTypes
CMM Inspection operation types.
|
static class |
InspectionMethodBuilder.PointSequenceDirectionTypes
the point sequence start direction
|
static class |
InspectionMethodBuilder.PointSequenceModeTypes
the point sequence modes
|
static class |
InspectionMethodBuilder.PointSequenceStartTypes
the point sequence start location
|
static class |
InspectionMethodBuilder.ProfileDispositionTypes
the analysis profile disposition fitting type
|
static class |
InspectionMethodBuilder.ReferenceFeatureModeTypes
the relative measurement mode
|
static class |
InspectionMethodBuilder.ScanCurveModeTypes
the scan curve mode
|
static class |
InspectionMethodBuilder.ScanHelixTurnDirectionTypes
the helix turn direction type
|
static class |
InspectionMethodBuilder.ScanHelixTurnTypes
the helix turn type
|
static class |
InspectionMethodBuilder.ScanModeTypes
the scan mode 3-axis, 5-axis type
|
static class |
InspectionMethodBuilder.SurfaceProfileTypes
the analysis surface profile fitting type
|
static class |
InspectionMethodBuilder.ToleranceDegreeOfFreedomMode
the tolerance degree of freedom mode
|
static class |
InspectionMethodBuilder.TransitionTypes
CMM Inspection transition modes.
|
static class |
InspectionMethodBuilder.UVModeTypes
the UV modes
|
Modifier and Type | Method and Description |
---|---|
double |
advanceAngle()
Returns the advance angle (degrees)
License requirements: None. |
double |
approachDistance()
Returns the approach distance
License requirements: None. |
InspectionMethodBuilder.AxisExtrapolationTypes |
axisExtrapolationMode()
Returns the analysis axis extrapolation mode
License requirements: None. |
boolean |
circularScan()
Returns a flag to indicate if scan arc is allowed
License requirements: None. |
NXColor |
colorApproach()
Returns the color used for displaying approach elements
License requirements: None. |
NXColor |
colorEntryExit()
Returns the color used for displaying entry and exit elements
License requirements: None. |
NXColor |
colorLine()
Returns the color used for displaying path lines
License requirements: None. |
NXColor |
colorMeasurePoint()
Returns the color used for displaying measured points
License requirements: None. |
NXColor |
colorRetract()
Returns the color used for displaying retract elements
License requirements: None. |
NXColor |
colorTransition()
Returns the color used for displaying transition elements
License requirements: None. |
double |
curvatureFactor()
Returns the curvature increase factor
License requirements: None. |
boolean |
curveScan()
Returns a flag to indicate if scan curve is allowed
License requirements: None. |
InspectionMethodBuilder.CylinderFittingTypes |
cylinderCircleFitMode()
Returns the analysis cylinder/circle fitting mode
License requirements: None. |
InspectionMethodBuilder.DatumPlaneFittingTypes |
datumPlaneFittingMode()
Returns the analysis datum plane fitting mode
License requirements: None. |
InspectionMethodBuilder.OperationTypes |
defaultOperationType()
Returns the default inspection operation type
License requirements: None. |
double |
depthDistance()
Returns the depth distance
License requirements: None. |
double |
endDistance()
Returns the end point offset distance along the scan
License requirements: None. |
double |
endPercentage()
Returns the end Percentage along the scan
License requirements: None. |
boolean |
entryAvoidance()
Returns a flag to indicate if collision avoidance is required at entry
License requirements: None. |
double |
entryExitDistance()
Returns the distance from the entry or exit point to safe plane
License requirements: None. |
boolean |
entryPoint()
Returns a flag to indicate if an entry point is required
License requirements: None. |
InspectionMethodBuilder.TransitionTypes |
entryTransition()
Returns the type of entry transition
License requirements: None. |
boolean |
exitAvoidance()
Returns a flag to indicate if collision avoidance is required at exit
License requirements: None. |
boolean |
exitPoint()
Returns a flag to indicate if an exit point is required
License requirements: None. |
InspectionMethodBuilder.TransitionTypes |
exitTransition()
Returns the type of exit transition
License requirements: None. |
double |
featureOffsetDistance()
Returns the offset feature distance
License requirements: None. |
InspectionMethodBuilder.InspectionModes |
inspectionMode()
Returns the default inspection mode
License requirements: None. |
InspectionMethodBuilder.LimitsOfSizeTypes |
limitsOfSizeMode()
Returns the analysis limits of size fitting mode
License requirements: None. |
boolean |
lineScan()
Returns a flag to indicate if scan line is allowed
License requirements: None. |
boolean |
manualPoint()
Returns a flag to indicate if manual point creation is allowed
License requirements: None. |
double |
maxSpacing()
Returns the maximum spacing between scan points
License requirements: None. |
InspectionMethodBuilder.MethodTypes |
methodType()
Returns the method feature type
License requirements: None. |
double |
minSpacing()
Returns the minimum spacing between scan points
License requirements: None. |
int |
nbScanPoints()
Returns the minimum number of scan points
License requirements: None. |
double |
offsetDistance()
Returns the offset distance
License requirements: None. |
double |
pitch()
Returns the pitch of the Scan Helix
License requirements: None. |
int |
pointCount()
Returns the number of path points
License requirements: None. |
boolean |
pointHelix()
Returns a flag to indicate if point helix is allowed
License requirements: None. |
InspectionMethodBuilder.PointSequenceDirectionTypes |
pointSequenceDirection()
Returns the point sequence start direction
License requirements: None. |
InspectionMethodBuilder.PointSequenceModeTypes |
pointSequenceMode()
Returns the point sequence mode
License requirements: None. |
InspectionMethodBuilder.PointSequenceStartTypes |
pointSequenceStart()
Returns the point sequence start location
License requirements: None. |
InspectionMoveBuilder.ProbeTipTypes |
probeTipType()
Returns the preferred probe tip type
License requirements: None. |
InspectionMethodBuilder.ProfileDispositionTypes |
profileDispositionMode()
Returns the analysis profile disposition fitting mode
License requirements: None. |
InspectionMethodBuilder.ReferenceFeatureModeTypes |
referenceFeatureMode()
Returns the relative measurement mode
License requirements: None. |
double |
referenceFeatureOffsetDistance()
Returns the offset distance for relative measurement
License requirements: None. |
int |
referenceFeaturePointCount()
Returns the number of points for relative measurement
License requirements: None. |
double |
referenceFeatureZoneRadius()
Returns the zone radius for relative measurement
License requirements: None. |
double |
retractDistance()
Returns the retract distance
License requirements: None. |
double |
revolutions()
Returns the revolutions of the Scan Helix
License requirements: None. |
InspectionMethodBuilder.ScanCurveModeTypes |
scanCurveMode()
Returns the scan curve mode
License requirements: None. |
double |
scanForce()
Returns the scan force
License requirements: None. |
InspectionMethodBuilder.ScanModeTypes |
scanModeType()
Returns the 3,5 axis scan mode type
License requirements: None. |
double |
scanSpeed()
Returns the scan speed
License requirements: None. |
InspectionMoveBuilder.SensorStrategyTypes |
sensorStrategy()
Returns the sensor selection strategy
License requirements: None. |
void |
setAdvanceAngle(double angle)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setApproachDistance(double distance)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setAxisExtrapolationMode(InspectionMethodBuilder.AxisExtrapolationTypes mode)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setCircularScan(boolean circularScan)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setColorApproach(NXColor colorApproach)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setColorEntryExit(NXColor colorEntryExit)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setColorLine(NXColor colorLine)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setColorMeasurePoint(NXColor colorMeasurePoint)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setColorRetract(NXColor colorRetract)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setColorTransition(NXColor colorTransition)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setCurvatureFactor(double curvatureFactor)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setCurveScan(boolean curveScan)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setCylinderCircleFitMode(InspectionMethodBuilder.CylinderFittingTypes mode)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setDatumPlaneFittingMode(InspectionMethodBuilder.DatumPlaneFittingTypes mode)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setDefaultOperationType(InspectionMethodBuilder.OperationTypes operationType)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setDepthDistance(double distance)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setEndDistance(double endDistance)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setEndPercentage(double endPercentage)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setEntryAvoidance(boolean entryAvoidance)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setEntryExitDistance(double entryExitDistance)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setEntryPoint(boolean entryPoint)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setEntryTransition(InspectionMethodBuilder.TransitionTypes entryTransition)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setExitAvoidance(boolean exitAvoidance)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setExitPoint(boolean exitPoint)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setExitTransition(InspectionMethodBuilder.TransitionTypes exitTransition)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setFeatureOffsetDistance(double distance)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setInspectionMode(InspectionMethodBuilder.InspectionModes inspectionMode)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setLimitsOfSizeMode(InspectionMethodBuilder.LimitsOfSizeTypes mode)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setLineScan(boolean lineScan)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setManualPoint(boolean manualPoint)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setMaxSpacing(double maxSpacing)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setMethodType(InspectionMethodBuilder.MethodTypes type)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setMinSpacing(double minSpacing)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setNbScanPoints(int count)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setOffsetDistance(double offsetDistance)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setPitch(double pitch)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setPointCount(int pointCount)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setPointHelix(boolean pointHelix)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setPointSequenceDirection(InspectionMethodBuilder.PointSequenceDirectionTypes ptSeqDir)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setPointSequenceMode(InspectionMethodBuilder.PointSequenceModeTypes ptSeqMode)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setPointSequenceStart(InspectionMethodBuilder.PointSequenceStartTypes ptSeqStart)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setProbeTipType(InspectionMoveBuilder.ProbeTipTypes tipType)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setProfileDispositionMode(InspectionMethodBuilder.ProfileDispositionTypes mode)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setReferenceFeatureMode(InspectionMethodBuilder.ReferenceFeatureModeTypes mode)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setReferenceFeatureOffsetDistance(double distance)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setReferenceFeaturePointCount(int pointCount)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setReferenceFeatureZoneRadius(double radius)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setRetractDistance(double distance)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setRevolutions(double revolutions)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setScanCurveMode(InspectionMethodBuilder.ScanCurveModeTypes mode)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setScanForce(double force)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setScanModeType(InspectionMethodBuilder.ScanModeTypes modeType)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setScanSpeed(double speed)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setSensorStrategy(InspectionMoveBuilder.SensorStrategyTypes sensorStrategy)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setSpeed(int speed)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setStartDistance(double startDistance)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setStartEndMode(InspectionMethodBuilder.UVModeTypes startEndMode)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setStartPercentage(double startPercentage)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setStepSize(double step)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setStopRadius(double radius)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setSurfaceProfileMode(InspectionMethodBuilder.SurfaceProfileTypes mode)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setSweep(double sweep)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setTiltAngle(double angle)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setTurnDirection(InspectionMethodBuilder.ScanHelixTurnDirectionTypes turnDirection)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setTurnType(InspectionMethodBuilder.ScanHelixTurnTypes turnType)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setUCount(int uCount)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setUEnd(double uEnd)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setUEndDeg(double uEnd)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setUEndDist(double uEnd)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setUEndMode(InspectionMethodBuilder.UVModeTypes uvMode)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setUEndSweep(double uEnd)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setUStart(double uStart)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setUStartDeg(double uStart)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setUStartDist(double uStart)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setUStartMode(InspectionMethodBuilder.UVModeTypes uvMode)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setUStartSweep(double uStart)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setUVGrid(boolean uvGrid)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setVCount(int vCount)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setVEnd(double vEnd)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setVEndDeg(double vEnd)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setVEndDist(double vEnd)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setVEndMode(InspectionMethodBuilder.UVModeTypes uvMode)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setVEndSweep(double vEnd)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setVStart(double vStart)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setVStartDeg(double vStart)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setVStartDist(double vStart)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setVStartMode(InspectionMethodBuilder.UVModeTypes uvMode)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
void |
setVStartSweep(double vStart)
License requirements: insp_programming ("INSPECTION PROGRAMMING") . |
int |
speed()
Returns the default animation speed setting
License requirements: None. |
double |
startDistance()
Returns the start point offset distance along the scan
License requirements: None. |
InspectionMethodBuilder.UVModeTypes |
startEndMode()
Returns the scan start end mode
License requirements: None. |
double |
startPercentage()
Returns the start percentage along the scan
License requirements: None. |
double |
stepSize()
Returns the scan step size
License requirements: None. |
double |
stopRadius()
Returns the scan stop radius
License requirements: None. |
InspectionMethodBuilder.SurfaceProfileTypes |
surfaceProfileMode()
Returns the analysis surface profile fitting mode
License requirements: None. |
double |
sweep()
Returns the sweep of the Scan Helix
License requirements: None. |
double |
tiltAngle()
Returns the tilt angle (degrees)
License requirements: None. |
InspectionMethodBuilder.ScanHelixTurnDirectionTypes |
turnDirection()
Returns the turn direction type of the Scan Helix
License requirements: None. |
InspectionMethodBuilder.ScanHelixTurnTypes |
turnType()
Returns the turn type of the Scan Helix
License requirements: None. |
int |
ucount()
Returns the number of points in U direction
License requirements: None. |
double |
uend()
Returns the U end parameter
License requirements: None. |
double |
uendDeg()
Returns the U end degrees
License requirements: None. |
double |
uendDist()
Returns the U end distance
License requirements: None. |
InspectionMethodBuilder.UVModeTypes |
uendMode()
Returns the end U mode
License requirements: None. |
double |
uendSweep()
Returns the U sweep degrees
License requirements: None. |
double |
ustart()
Returns the U start parameter
License requirements: None. |
double |
ustartDeg()
Returns the U start degrees
License requirements: None. |
double |
ustartDist()
Returns the U start distance
License requirements: None. |
InspectionMethodBuilder.UVModeTypes |
ustartMode()
Returns the start U mode
License requirements: None. |
double |
ustartSweep()
Returns the U start sweep degrees
License requirements: None. |
boolean |
uvgrid()
Returns a flag to indicate if rectangular UV grid is allowed
License requirements: None. |
int |
vcount()
Returns the number of points in V direction
License requirements: None. |
double |
vend()
Returns the V end parameter
License requirements: None. |
double |
vendDeg()
Returns the V end degrees
License requirements: None. |
double |
vendDist()
Returns the V end distance
License requirements: None. |
InspectionMethodBuilder.UVModeTypes |
vendMode()
Returns the end V mode
License requirements: None. |
double |
vendSweep()
Returns the V sweep degrees
License requirements: None. |
double |
vstart()
Returns the V start parameter
License requirements: None. |
double |
vstartDeg()
Returns the V start degrees
License requirements: None. |
double |
vstartDist()
Returns the V start distance
License requirements: None. |
InspectionMethodBuilder.UVModeTypes |
vstartMode()
Returns the start V mode
License requirements: None. |
double |
vstartSweep()
Returns the V start sweep degrees
License requirements: None. |
cutParameters, getCutMethod, paintDisplay, pathDisplay, pathDisplayColors, setCutMethod, silhouDisplay, toolDisplay
InspectionMethodBuilder.MethodTypes methodType() throws NXException, RemoteException
NXException
RemoteException
void setMethodType(InspectionMethodBuilder.MethodTypes type) throws NXException, RemoteException
type
- NXException
RemoteException
int pointCount() throws NXException, RemoteException
NXException
RemoteException
void setPointCount(int pointCount) throws NXException, RemoteException
pointCount
- NXException
RemoteException
int ucount() throws NXException, RemoteException
NXException
RemoteException
void setUCount(int uCount) throws NXException, RemoteException
uCount
- NXException
RemoteException
int vcount() throws NXException, RemoteException
NXException
RemoteException
void setVCount(int vCount) throws NXException, RemoteException
vCount
- NXException
RemoteException
double ustart() throws NXException, RemoteException
NXException
RemoteException
void setUStart(double uStart) throws NXException, RemoteException
uStart
- NXException
RemoteException
double uend() throws NXException, RemoteException
NXException
RemoteException
void setUEnd(double uEnd) throws NXException, RemoteException
uEnd
- NXException
RemoteException
double vstart() throws NXException, RemoteException
NXException
RemoteException
void setVStart(double vStart) throws NXException, RemoteException
vStart
- NXException
RemoteException
double vend() throws NXException, RemoteException
NXException
RemoteException
void setVEnd(double vEnd) throws NXException, RemoteException
vEnd
- NXException
RemoteException
double ustartDist() throws NXException, RemoteException
NXException
RemoteException
void setUStartDist(double uStart) throws NXException, RemoteException
uStart
- NXException
RemoteException
double uendDist() throws NXException, RemoteException
NXException
RemoteException
void setUEndDist(double uEnd) throws NXException, RemoteException
uEnd
- NXException
RemoteException
double vstartDist() throws NXException, RemoteException
NXException
RemoteException
void setVStartDist(double vStart) throws NXException, RemoteException
vStart
- NXException
RemoteException
double vendDist() throws NXException, RemoteException
NXException
RemoteException
void setVEndDist(double vEnd) throws NXException, RemoteException
vEnd
- NXException
RemoteException
double ustartDeg() throws NXException, RemoteException
NXException
RemoteException
void setUStartDeg(double uStart) throws NXException, RemoteException
uStart
- NXException
RemoteException
double uendDeg() throws NXException, RemoteException
NXException
RemoteException
void setUEndDeg(double uEnd) throws NXException, RemoteException
uEnd
- NXException
RemoteException
double vstartDeg() throws NXException, RemoteException
NXException
RemoteException
void setVStartDeg(double vStart) throws NXException, RemoteException
vStart
- NXException
RemoteException
double vendDeg() throws NXException, RemoteException
NXException
RemoteException
void setVEndDeg(double vEnd) throws NXException, RemoteException
vEnd
- NXException
RemoteException
double ustartSweep() throws NXException, RemoteException
NXException
RemoteException
void setUStartSweep(double uStart) throws NXException, RemoteException
uStart
- NXException
RemoteException
double uendSweep() throws NXException, RemoteException
NXException
RemoteException
void setUEndSweep(double uEnd) throws NXException, RemoteException
uEnd
- NXException
RemoteException
double vstartSweep() throws NXException, RemoteException
NXException
RemoteException
void setVStartSweep(double vStart) throws NXException, RemoteException
vStart
- NXException
RemoteException
double vendSweep() throws NXException, RemoteException
NXException
RemoteException
void setVEndSweep(double vEnd) throws NXException, RemoteException
vEnd
- NXException
RemoteException
InspectionMethodBuilder.UVModeTypes ustartMode() throws NXException, RemoteException
NXException
RemoteException
void setUStartMode(InspectionMethodBuilder.UVModeTypes uvMode) throws NXException, RemoteException
uvMode
- NXException
RemoteException
InspectionMethodBuilder.UVModeTypes uendMode() throws NXException, RemoteException
NXException
RemoteException
void setUEndMode(InspectionMethodBuilder.UVModeTypes uvMode) throws NXException, RemoteException
uvMode
- NXException
RemoteException
InspectionMethodBuilder.UVModeTypes vstartMode() throws NXException, RemoteException
NXException
RemoteException
void setVStartMode(InspectionMethodBuilder.UVModeTypes uvMode) throws NXException, RemoteException
uvMode
- NXException
RemoteException
InspectionMethodBuilder.UVModeTypes vendMode() throws NXException, RemoteException
NXException
RemoteException
void setVEndMode(InspectionMethodBuilder.UVModeTypes uvMode) throws NXException, RemoteException
uvMode
- NXException
RemoteException
double approachDistance() throws NXException, RemoteException
NXException
RemoteException
void setApproachDistance(double distance) throws NXException, RemoteException
distance
- NXException
RemoteException
double retractDistance() throws NXException, RemoteException
NXException
RemoteException
void setRetractDistance(double distance) throws NXException, RemoteException
distance
- NXException
RemoteException
double depthDistance() throws NXException, RemoteException
NXException
RemoteException
void setDepthDistance(double distance) throws NXException, RemoteException
distance
- NXException
RemoteException
InspectionMethodBuilder.InspectionModes inspectionMode() throws NXException, RemoteException
NXException
RemoteException
void setInspectionMode(InspectionMethodBuilder.InspectionModes inspectionMode) throws NXException, RemoteException
inspectionMode
- NXException
RemoteException
InspectionMethodBuilder.OperationTypes defaultOperationType() throws NXException, RemoteException
NXException
RemoteException
void setDefaultOperationType(InspectionMethodBuilder.OperationTypes operationType) throws NXException, RemoteException
operationType
- NXException
RemoteException
InspectionMethodBuilder.TransitionTypes entryTransition() throws NXException, RemoteException
NXException
RemoteException
void setEntryTransition(InspectionMethodBuilder.TransitionTypes entryTransition) throws NXException, RemoteException
entryTransition
- NXException
RemoteException
boolean entryPoint() throws NXException, RemoteException
NXException
RemoteException
void setEntryPoint(boolean entryPoint) throws NXException, RemoteException
entryPoint
- NXException
RemoteException
boolean entryAvoidance() throws NXException, RemoteException
NXException
RemoteException
void setEntryAvoidance(boolean entryAvoidance) throws NXException, RemoteException
entryAvoidance
- NXException
RemoteException
double entryExitDistance() throws NXException, RemoteException
NXException
RemoteException
void setEntryExitDistance(double entryExitDistance) throws NXException, RemoteException
entryExitDistance
- NXException
RemoteException
boolean exitAvoidance() throws NXException, RemoteException
NXException
RemoteException
void setExitAvoidance(boolean exitAvoidance) throws NXException, RemoteException
exitAvoidance
- NXException
RemoteException
boolean exitPoint() throws NXException, RemoteException
NXException
RemoteException
void setExitPoint(boolean exitPoint) throws NXException, RemoteException
exitPoint
- NXException
RemoteException
InspectionMethodBuilder.TransitionTypes exitTransition() throws NXException, RemoteException
NXException
RemoteException
void setExitTransition(InspectionMethodBuilder.TransitionTypes exitTransition) throws NXException, RemoteException
exitTransition
- NXException
RemoteException
int speed() throws NXException, RemoteException
NXException
RemoteException
void setSpeed(int speed) throws NXException, RemoteException
speed
- NXException
RemoteException
NXColor colorTransition() throws NXException, RemoteException
NXException
RemoteException
void setColorTransition(NXColor colorTransition) throws NXException, RemoteException
colorTransition
- NXException
RemoteException
NXColor colorApproach() throws NXException, RemoteException
NXException
RemoteException
void setColorApproach(NXColor colorApproach) throws NXException, RemoteException
colorApproach
- NXException
RemoteException
NXColor colorRetract() throws NXException, RemoteException
NXException
RemoteException
void setColorRetract(NXColor colorRetract) throws NXException, RemoteException
colorRetract
- NXException
RemoteException
NXColor colorEntryExit() throws NXException, RemoteException
NXException
RemoteException
void setColorEntryExit(NXColor colorEntryExit) throws NXException, RemoteException
colorEntryExit
- NXException
RemoteException
NXColor colorMeasurePoint() throws NXException, RemoteException
NXException
RemoteException
void setColorMeasurePoint(NXColor colorMeasurePoint) throws NXException, RemoteException
colorMeasurePoint
- NXException
RemoteException
NXColor colorLine() throws NXException, RemoteException
NXException
RemoteException
void setColorLine(NXColor colorLine) throws NXException, RemoteException
colorLine
- NXException
RemoteException
boolean manualPoint() throws NXException, RemoteException
NXException
RemoteException
void setManualPoint(boolean manualPoint) throws NXException, RemoteException
manualPoint
- NXException
RemoteException
boolean uvgrid() throws NXException, RemoteException
NXException
RemoteException
void setUVGrid(boolean uvGrid) throws NXException, RemoteException
uvGrid
- NXException
RemoteException
boolean pointHelix() throws NXException, RemoteException
NXException
RemoteException
void setPointHelix(boolean pointHelix) throws NXException, RemoteException
pointHelix
- NXException
RemoteException
boolean lineScan() throws NXException, RemoteException
NXException
RemoteException
void setLineScan(boolean lineScan) throws NXException, RemoteException
lineScan
- NXException
RemoteException
boolean circularScan() throws NXException, RemoteException
NXException
RemoteException
void setCircularScan(boolean circularScan) throws NXException, RemoteException
circularScan
- NXException
RemoteException
boolean curveScan() throws NXException, RemoteException
NXException
RemoteException
void setCurveScan(boolean curveScan) throws NXException, RemoteException
curveScan
- NXException
RemoteException
InspectionMethodBuilder.PointSequenceModeTypes pointSequenceMode() throws NXException, RemoteException
NXException
RemoteException
void setPointSequenceMode(InspectionMethodBuilder.PointSequenceModeTypes ptSeqMode) throws NXException, RemoteException
ptSeqMode
- NXException
RemoteException
InspectionMethodBuilder.PointSequenceStartTypes pointSequenceStart() throws NXException, RemoteException
NXException
RemoteException
void setPointSequenceStart(InspectionMethodBuilder.PointSequenceStartTypes ptSeqStart) throws NXException, RemoteException
ptSeqStart
- NXException
RemoteException
InspectionMethodBuilder.PointSequenceDirectionTypes pointSequenceDirection() throws NXException, RemoteException
NXException
RemoteException
void setPointSequenceDirection(InspectionMethodBuilder.PointSequenceDirectionTypes ptSeqDir) throws NXException, RemoteException
ptSeqDir
- NXException
RemoteException
InspectionMethodBuilder.ScanCurveModeTypes scanCurveMode() throws NXException, RemoteException
NXException
RemoteException
void setScanCurveMode(InspectionMethodBuilder.ScanCurveModeTypes mode) throws NXException, RemoteException
mode
- NXException
RemoteException
int nbScanPoints() throws NXException, RemoteException
NXException
RemoteException
void setNbScanPoints(int count) throws NXException, RemoteException
count
- NXException
RemoteException
double minSpacing() throws NXException, RemoteException
NXException
RemoteException
void setMinSpacing(double minSpacing) throws NXException, RemoteException
minSpacing
- NXException
RemoteException
double maxSpacing() throws NXException, RemoteException
NXException
RemoteException
void setMaxSpacing(double maxSpacing) throws NXException, RemoteException
maxSpacing
- NXException
RemoteException
double curvatureFactor() throws NXException, RemoteException
NXException
RemoteException
void setCurvatureFactor(double curvatureFactor) throws NXException, RemoteException
curvatureFactor
- NXException
RemoteException
double offsetDistance() throws NXException, RemoteException
NXException
RemoteException
void setOffsetDistance(double offsetDistance) throws NXException, RemoteException
offsetDistance
- NXException
RemoteException
InspectionMethodBuilder.UVModeTypes startEndMode() throws NXException, RemoteException
NXException
RemoteException
void setStartEndMode(InspectionMethodBuilder.UVModeTypes startEndMode) throws NXException, RemoteException
startEndMode
- NXException
RemoteException
double startDistance() throws NXException, RemoteException
NXException
RemoteException
void setStartDistance(double startDistance) throws NXException, RemoteException
startDistance
- NXException
RemoteException
double endDistance() throws NXException, RemoteException
NXException
RemoteException
void setEndDistance(double endDistance) throws NXException, RemoteException
endDistance
- NXException
RemoteException
double startPercentage() throws NXException, RemoteException
NXException
RemoteException
void setStartPercentage(double startPercentage) throws NXException, RemoteException
startPercentage
- NXException
RemoteException
double endPercentage() throws NXException, RemoteException
NXException
RemoteException
void setEndPercentage(double endPercentage) throws NXException, RemoteException
endPercentage
- NXException
RemoteException
double tiltAngle() throws NXException, RemoteException
NXException
RemoteException
void setTiltAngle(double angle) throws NXException, RemoteException
angle
- NXException
RemoteException
double advanceAngle() throws NXException, RemoteException
NXException
RemoteException
void setAdvanceAngle(double angle) throws NXException, RemoteException
angle
- NXException
RemoteException
double stepSize() throws NXException, RemoteException
NXException
RemoteException
void setStepSize(double step) throws NXException, RemoteException
step
- NXException
RemoteException
double stopRadius() throws NXException, RemoteException
NXException
RemoteException
void setStopRadius(double radius) throws NXException, RemoteException
radius
- NXException
RemoteException
double scanSpeed() throws NXException, RemoteException
NXException
RemoteException
void setScanSpeed(double speed) throws NXException, RemoteException
speed
- NXException
RemoteException
double scanForce() throws NXException, RemoteException
NXException
RemoteException
void setScanForce(double force) throws NXException, RemoteException
force
- NXException
RemoteException
InspectionMethodBuilder.ScanModeTypes scanModeType() throws NXException, RemoteException
NXException
RemoteException
void setScanModeType(InspectionMethodBuilder.ScanModeTypes modeType) throws NXException, RemoteException
modeType
- NXException
RemoteException
InspectionMethodBuilder.ScanHelixTurnTypes turnType() throws NXException, RemoteException
NXException
RemoteException
void setTurnType(InspectionMethodBuilder.ScanHelixTurnTypes turnType) throws NXException, RemoteException
turnType
- NXException
RemoteException
InspectionMethodBuilder.ScanHelixTurnDirectionTypes turnDirection() throws NXException, RemoteException
NXException
RemoteException
void setTurnDirection(InspectionMethodBuilder.ScanHelixTurnDirectionTypes turnDirection) throws NXException, RemoteException
turnDirection
- NXException
RemoteException
double pitch() throws NXException, RemoteException
NXException
RemoteException
void setPitch(double pitch) throws NXException, RemoteException
pitch
- NXException
RemoteException
double sweep() throws NXException, RemoteException
NXException
RemoteException
void setSweep(double sweep) throws NXException, RemoteException
sweep
- NXException
RemoteException
double revolutions() throws NXException, RemoteException
NXException
RemoteException
void setRevolutions(double revolutions) throws NXException, RemoteException
revolutions
- NXException
RemoteException
InspectionMethodBuilder.DatumPlaneFittingTypes datumPlaneFittingMode() throws NXException, RemoteException
NXException
RemoteException
void setDatumPlaneFittingMode(InspectionMethodBuilder.DatumPlaneFittingTypes mode) throws NXException, RemoteException
mode
- NXException
RemoteException
InspectionMethodBuilder.AxisExtrapolationTypes axisExtrapolationMode() throws NXException, RemoteException
NXException
RemoteException
void setAxisExtrapolationMode(InspectionMethodBuilder.AxisExtrapolationTypes mode) throws NXException, RemoteException
mode
- NXException
RemoteException
InspectionMethodBuilder.LimitsOfSizeTypes limitsOfSizeMode() throws NXException, RemoteException
NXException
RemoteException
void setLimitsOfSizeMode(InspectionMethodBuilder.LimitsOfSizeTypes mode) throws NXException, RemoteException
mode
- NXException
RemoteException
InspectionMethodBuilder.CylinderFittingTypes cylinderCircleFitMode() throws NXException, RemoteException
NXException
RemoteException
void setCylinderCircleFitMode(InspectionMethodBuilder.CylinderFittingTypes mode) throws NXException, RemoteException
mode
- NXException
RemoteException
InspectionMethodBuilder.SurfaceProfileTypes surfaceProfileMode() throws NXException, RemoteException
NXException
RemoteException
void setSurfaceProfileMode(InspectionMethodBuilder.SurfaceProfileTypes mode) throws NXException, RemoteException
mode
- NXException
RemoteException
InspectionMethodBuilder.ProfileDispositionTypes profileDispositionMode() throws NXException, RemoteException
NXException
RemoteException
void setProfileDispositionMode(InspectionMethodBuilder.ProfileDispositionTypes mode) throws NXException, RemoteException
mode
- NXException
RemoteException
InspectionMoveBuilder.SensorStrategyTypes sensorStrategy() throws NXException, RemoteException
NXException
RemoteException
void setSensorStrategy(InspectionMoveBuilder.SensorStrategyTypes sensorStrategy) throws NXException, RemoteException
sensorStrategy
- NXException
RemoteException
InspectionMoveBuilder.ProbeTipTypes probeTipType() throws NXException, RemoteException
NXException
RemoteException
void setProbeTipType(InspectionMoveBuilder.ProbeTipTypes tipType) throws NXException, RemoteException
tipType
- NXException
RemoteException
double featureOffsetDistance() throws NXException, RemoteException
NXException
RemoteException
void setFeatureOffsetDistance(double distance) throws NXException, RemoteException
distance
- NXException
RemoteException
InspectionMethodBuilder.ReferenceFeatureModeTypes referenceFeatureMode() throws NXException, RemoteException
NXException
RemoteException
void setReferenceFeatureMode(InspectionMethodBuilder.ReferenceFeatureModeTypes mode) throws NXException, RemoteException
mode
- NXException
RemoteException
int referenceFeaturePointCount() throws NXException, RemoteException
NXException
RemoteException
void setReferenceFeaturePointCount(int pointCount) throws NXException, RemoteException
pointCount
- NXException
RemoteException
double referenceFeatureOffsetDistance() throws NXException, RemoteException
NXException
RemoteException
void setReferenceFeatureOffsetDistance(double distance) throws NXException, RemoteException
distance
- NXException
RemoteException
double referenceFeatureZoneRadius() throws NXException, RemoteException
NXException
RemoteException
void setReferenceFeatureZoneRadius(double radius) throws NXException, RemoteException
radius
- NXException
RemoteException
Copyright 2011 Siemens Product Lifecycle Management Software Inc. All Rights Reserved.