public interface MWMoldedPartValidationBuilder extends Builder
MWMoldedPartValidationManager.createMWMoldedPartValidationBuilder()
Property | Value |
---|---|
CalculationOption | KeepExisting |
FaceDraftAngleLimit | 3 |
FaceHighlightSelectedFaces | 1 |
FaceNonSelectedFacesTranslucency | 0 |
FaceSelectAllFaces | 0 |
FaceSelectCrossoverFaces | 0 |
FaceSelectNegativeFaces1 | 0 |
FaceSelectNegativeFaces2 | 0 |
FaceSelectPositiveFaces1 | 0 |
FaceSelectPositiveFaces2 | 0 |
FaceSelectUndercutAreas | 0 |
FaceSelectUndercutEdges | 0 |
FaceSelectVerticalFaces | 0 |
FaceSelectedFacesTranslucency | 0 |
InformationCheckScope | FaceProperties |
InformationLowerLimit | 0 |
InformationLowerLimitR01 | 5.5 |
InformationLowerLimitR02 | 5 |
InformationLowerLimitR03 | 4.5 |
InformationLowerLimitR04 | 4 |
InformationLowerLimitR05 | 3.5 |
InformationLowerLimitR06 | 3 |
InformationLowerLimitR07 | 2.5 |
InformationLowerLimitR08 | 2 |
InformationLowerLimitR09 | 1.5 |
InformationLowerLimitR10 | 1 |
InformationLowerLimitR11 | 0.5 |
InformationLowerLimitR12 | 0 |
InformationRangeType | Uniform |
InformationSharpAngleLimit | 6 |
InformationShowBoundaryEdges | 0 |
InformationShowRangeR01 | 0 |
InformationShowRangeR02 | 0 |
InformationShowRangeR03 | 0 |
InformationShowRangeR04 | 0 |
InformationShowRangeR05 | 0 |
InformationShowRangeR06 | 0 |
InformationShowRangeR07 | 0 |
InformationShowRangeR08 | 0 |
InformationShowRangeR09 | 0 |
InformationShowRangeR10 | 0 |
InformationShowRangeR11 | 0 |
InformationShowRangeR12 | 0 |
InformationShowSharpEdges | 0 |
InformationUpperLimit | 6 |
InformationUpperLimitR01 | 6 |
InformationUpperLimitR02 | 5.5 |
InformationUpperLimitR03 | 5 |
InformationUpperLimitR04 | 4.5 |
InformationUpperLimitR05 | 4 |
InformationUpperLimitR06 | 3.5 |
InformationUpperLimitR07 | 3 |
InformationUpperLimitR08 | 2.5 |
InformationUpperLimitR09 | 2 |
InformationUpperLimitR10 | 0.5 |
InformationUpperLimitR11 | 1 |
InformationUpperLimitR12 | 0.5 |
InformationUseSingleTolerance | 0 |
RegionAssignToRegionOption | CavityRegion |
RegionCavityRegionTranslucency | 0 |
RegionCoreRegionTranslucency | 0 |
RegionSelectCrossoverRegionFaces | 0 |
RegionSelectCrossoverVerticalFaces | 0 |
RegionSelectUnknownFaces | 0 |
RegionShowIncompleteLoops | 1 |
RegionShowInternalLoops | 1 |
RegionShowPartingEdges | 1 |
Modifier and Type | Interface and Description |
---|---|
static class |
MWMoldedPartValidationBuilder.AssignToRegion
Options for assigning faces to the Cavity or Core region
|
static class |
MWMoldedPartValidationBuilder.CalculateOption
Calculation options
|
static class |
MWMoldedPartValidationBuilder.CheckScope
Check scope for information
|
static class |
MWMoldedPartValidationBuilder.RangeType
Range type for displaying small corner radius faces
|
Modifier and Type | Method and Description |
---|---|
int |
activeTabPage()
Returns the active tab page.
|
void |
calculate()
Calculate button on the Calculate Tab page.
|
nxopen.Direction |
calculationDrawDirection()
Returns the draw direction on the Calculate Tab page.
|
MWMoldedPartValidationBuilder.CalculateOption |
calculationOption()
Returns the calculation option on the Calculate Tab page.
|
SelectBody |
calculationProductBody()
Returns the product body to be analyzed on the Calculate Tab page.
|
NXColor |
faceAllFacesColor()
Returns the color for applying to all faces on the Face Tab page.
|
NXColor |
faceCrossoverFacesColor()
Returns the color for applying to the crossover faces on the Face Tab page.
|
double |
faceDraftAngleLimit()
Returns the draft angle limit on the Face Tab page.
|
boolean |
faceHighlightSelectedFaces()
Returns the option for highlighting the selected faces on the Face Tab page.
|
NXColor |
faceNegativeFacesColor1()
Returns the color for applying to the negative small radius faces on the Face Tab page.
|
NXColor |
faceNegativeFacesColor2()
Returns the color for applying to the negative faces on the Face Tab page.
|
int |
faceNonSelectedFacesTranslucency()
Returns the translucency for the non-selected faces on the Face Tab page.
|
NXColor |
facePositiveFacesColor1()
Returns the color for applying to the positive faces on the Face Tab page.
|
NXColor |
facePositiveFacesColor2()
Returns the color for applying to the positive small radius faces on the Face Tab page.
|
boolean |
faceSelectAllFaces()
Returns the option for turning on/off the selection of all faces on the Face Tab page.
|
boolean |
faceSelectCrossoverFaces()
Returns the option for turning on/off the highlight of the crossover faces on the Face Tab page.
|
int |
faceSelectedFacesTranslucency()
Returns the translucency for the selected faces on the Face Tab page.
|
boolean |
faceSelectNegativeFaces1()
Returns the option for turning on/off the highlight of the negative small radius faces on the Face Tab page.
|
boolean |
faceSelectNegativeFaces2()
Returns the option for turning on/off the highlight of the negative faces on the Face Tab page.
|
boolean |
faceSelectPositiveFaces1()
Returns the option for turning on/off the highlight of the positive faces on the Face Tab page.
|
boolean |
faceSelectPositiveFaces2()
Returns the option for turning on/off the highlight of the positive small radius faces on the Face Tab page.
|
boolean |
faceSelectUndercutAreas()
Returns the option for turning on/off the highlight of the undercut area faces on the Face Tab page.
|
boolean |
faceSelectUndercutEdges()
Returns the option for turning on/off the highlight of the undercut edges on the Face Tab page.
|
boolean |
faceSelectVerticalFaces()
Returns the option for turning on/off the highlight of the vertical faces on the Face Tab page.
|
void |
faceSetAllFacesColor()
Action button for setting color on all faces on the Face Tab page.
|
NXColor |
faceUndercutAreasColor()
Returns the color for applying to the undercut area faces on the Face Tab page.
|
NXColor |
faceUndercutEdgesColor()
Returns the color for applying to the undercut edges on the Face Tab page.
|
NXColor |
faceVerticalFacesColor()
Returns the color for applying to the vertical faces on the Face Tab page.
|
int |
inApplyStatus()
Returns the flag that indicates the Apply status of the command, needed only in the interactive environment. 0: "Apply" has not been done before; 1: "Apply" has been done before.
|
MWMoldedPartValidationBuilder.CheckScope |
informationCheckScope()
Returns the check scope on the Information Tab page.
|
NXColor |
informationColorR01()
Returns the color of row 1 for the small radius faces on the Information Tab page.
|
NXColor |
informationColorR02()
Returns the color of row 2 for the small radius faces on the Information Tab page.
|
NXColor |
informationColorR03()
Returns the color of row 3 for the small radius faces on the Information Tab page.
|
NXColor |
informationColorR04()
Returns the color of row 4 for the small radius faces on the Information Tab page.
|
NXColor |
informationColorR05()
Returns the color of row 5 for the small radius faces on the Information Tab page.
|
NXColor |
informationColorR06()
Returns the color of row 6 for the small radius faces on the Information Tab page.
|
NXColor |
informationColorR07()
Returns the color of row 7 for the small radius faces on the Information Tab page.
|
NXColor |
informationColorR08()
Returns the color of row 8 for the small radius faces on the Information Tab page.
|
NXColor |
informationColorR09()
Returns the color of row 9 for the small radius faces on the Information Tab page.
|
NXColor |
informationColorR10()
Returns the color of row 10 for the small radius faces on the Information Tab page.
|
NXColor |
informationColorR11()
Returns the color of row 11 for the small radius faces on the Information Tab page.
|
NXColor |
informationColorR12()
Returns the color of row 12 for the small radius faces on the Information Tab page.
|
SelectFace |
informationInspectFace()
Returns the face selected face for displaying the face properties.
|
double |
informationLowerLimit()
Returns the lower limit of the range limit values on the Information Tab page.
|
double |
informationLowerLimitR01()
Returns the lower limit of row 1 for the small radius faces on the Information Tab page.
|
double |
informationLowerLimitR02()
Returns the lower limit of row 2 for the small radius faces on the Information Tab page.
|
double |
informationLowerLimitR03()
Returns the lower limit of row 3 for the small radius faces on the Information Tab page.
|
double |
informationLowerLimitR04()
Returns the lower limit of row 4 for the small radius faces on the Information Tab page.
|
double |
informationLowerLimitR05()
Returns the lower limit of row 5 for the small radius faces on the Information Tab page.
|
double |
informationLowerLimitR06()
Returns the lower limit of row 6 for the small radius faces on the Information Tab page.
|
double |
informationLowerLimitR07()
Returns the lower limit of row 7 for the small radius faces on the Information Tab page.
|
double |
informationLowerLimitR08()
Returns the lower limit of row 8 for the small radius faces on the Information Tab page.
|
double |
informationLowerLimitR09()
Returns the lower limit of row 9 for the small radius faces on the Information Tab page.
|
double |
informationLowerLimitR10()
Returns the lower limit of row 10 for the small radius faces on the Information Tab page.
|
double |
informationLowerLimitR11()
Returns the lower limit of row 11 for the small radius faces on the Information Tab page.
|
double |
informationLowerLimitR12()
Returns the lower limit of row 12 for the small radius faces on the Information Tab page.
|
MWMoldedPartValidationBuilder.RangeType |
informationRangeType()
Returns the range type on the Information Tab page.
|
double |
informationSharpAngleLimit()
Returns the sharp angle limit on the Information Tab page.
|
boolean |
informationShowBoundaryEdges()
Returns the option for turning on/off the highlight of the boundary edges of the sheet body on the Information Tab page.
|
boolean |
informationShowRangeR01()
Returns the option of selecting the small radius faces within the range limit values of row 1 on the Information Tab page.
|
boolean |
informationShowRangeR02()
Returns the option of selecting the small radius faces within the range limit values of row 2 on the Information Tab page.
|
boolean |
informationShowRangeR03()
Returns the option of selecting the small radius faces within the range limit values of row 3 on the Information Tab page.
|
boolean |
informationShowRangeR04()
Returns the option of selecting the small radius faces within the range limit values of row 4 on the Information Tab page.
|
boolean |
informationShowRangeR05()
Returns the option of selecting the small radius faces within the range limit values of row 5 on the Information Tab page.
|
boolean |
informationShowRangeR06()
Returns the option of selecting the small radius faces within the range limit values of row 6 on the Information Tab page.
|
boolean |
informationShowRangeR07()
Returns the option of selecting the small radius faces within the range limit values of row 7 on the Information Tab page.
|
boolean |
informationShowRangeR08()
Returns the option of selecting the small radius faces within the range limit values of row 8 on the Information Tab page.
|
boolean |
informationShowRangeR09()
Returns the option of selecting the small radius faces within the range limit values of row 9 on the Information Tab page.
|
boolean |
informationShowRangeR10()
Returns the option of selecting the small radius faces within the range limit values of row 10 on the Information Tab page.
|
boolean |
informationShowRangeR11()
Returns the option of selecting the small radius faces within the range limit values of row 11 on the Information Tab page.
|
boolean |
informationShowRangeR12()
Returns the option of selecting the small radius faces within the range limit values of row 12 on the Information Tab page.
|
boolean |
informationShowSharpEdges()
Returns the option for turning on/off the highlight of the sharp edges of the sheet body on the Information Tab page.
|
double |
informationUpperLimit()
Returns the upper limit on the Information Tab page.
|
double |
informationUpperLimitR01()
Returns the upper limit of row 1 for the small radius faces on the Information Tab page.
|
double |
informationUpperLimitR02()
Returns the upper limit of row 2 for the small radius faces on the Information Tab page.
|
double |
informationUpperLimitR03()
Returns the upper limit of row 3 for the small radius faces on the Information Tab page.
|
double |
informationUpperLimitR04()
Returns the upper limit of row 4 for the small radius faces on the Information Tab page.
|
double |
informationUpperLimitR05()
Returns the upper limit of row 5 for the small radius faces on the Information Tab page.
|
double |
informationUpperLimitR06()
Returns the upper limit of row 6 for the small radius faces on the Information Tab page.
|
double |
informationUpperLimitR07()
Returns the upper limit of row 7 for the small radius faces on the Information Tab page.
|
double |
informationUpperLimitR08()
Returns the upper limit of row 8 for the small radius faces on the Information Tab page.
|
double |
informationUpperLimitR09()
Returns the upper limit of row 9 for the small radius faces on the Information Tab page.
|
double |
informationUpperLimitR10()
Returns the upper limit of row 10 for the small radius faces on the Information Tab page.
|
double |
informationUpperLimitR11()
Returns the upper limit of row 11 for the small radius faces on the Information Tab page.
|
double |
informationUpperLimitR12()
Returns the upper limit of row 12 for the small radius faces on the Information Tab page.
|
boolean |
informationUseSingleTolerance()
Returns the option for using a single tolerance for defining the range limit values on the Information Tab page.
|
void |
initMpvData(int changeBody)
Initialize the MPV data for performing analysis in Molded Part Validation.
|
void |
performModelPropertiesCalculation()
Perform model properties calculation if the calculation has not been performed before.
|
void |
performSharpCornersCalculation()
Perform the sharp corners calculation if the calculation has not been performed before.
|
void |
processFaceSplit()
Action button for invoking the Split Face command on the Face Tab page.
|
MWMoldedPartValidationBuilder.AssignToRegion |
regionAssignToRegionOption()
Returns the option for assigning the selected region faces to the cavity or core region on the Region Tab page.
|
NXColor |
regionCavityRegionColor()
Returns the color for applying to the cavity region faces on the Region Tab page.
|
int |
regionCavityRegionTranslucency()
Returns the translucency for applying to the cavity region faces on the Region Tab page.
|
NXColor |
regionCoreRegionColor()
Returns the color for applying to the core region faces on the Region Tab page.
|
int |
regionCoreRegionTranslucency()
Returns the translucency for applying to the core region faces on the Region Tab page.
|
SelectFaceList |
regionFaces()
Returns the faces selected for assigning to the cavity or core region.
|
boolean |
regionSelectCrossoverRegionFaces()
Returns the option for including or removing the crossover region faces in the selection on the Region Tab page.
|
boolean |
regionSelectCrossoverVerticalFaces()
Returns the option for including or removing the crossover vertical faces in the selection on the Region Tab page.
|
boolean |
regionSelectUnknownFaces()
Returns the option for including or removing the unknown faces in the selection on the Region Tab page.
|
void |
regionSetRegionsColor()
Action button for setting color on the cavity, core and undefined region faces on the Region Tab page.
|
boolean |
regionShowIncompleteLoops()
Returns the option for turning on/off the highlight of the incomplete loop edges.
|
boolean |
regionShowInternalLoops()
Returns the option for turning on/off the highlight of the internal loop edges.
|
boolean |
regionShowPartingEdges()
Returns the option for turning on/off the highlight of the parting edges.
|
NXColor |
regionUndefinedRegionColor()
Returns the color for applying to the undefined region faces on the Region Tab page.
|
void |
setActiveTabPage(int activeTabPage)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setCalculationDrawDirection(nxopen.Direction calculationDrawDirection)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setCalculationOption(MWMoldedPartValidationBuilder.CalculateOption calculationOption)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setCalculationProductBody(Body calculationProductBody)
Set the product body to be analyzed on the Calculate Tab page.
|
void |
setFaceAllFacesColor(NXColor faceAllFacesColor)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setFaceCrossoverFacesColor(NXColor faceCrossoverFacesColor)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setFaceDraftAngleLimit(double faceDraftAngleLimit)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setFaceHighlightSelectedFaces(boolean faceHighlightSelectedFaces)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setFaceNegativeFacesColor1(NXColor faceNegativeFacesColor1)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setFaceNegativeFacesColor2(NXColor faceNegativeFacesColor2)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setFaceNonSelectedFacesTranslucency(int faceNonSelectedFacesTranslucency)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setFacePositiveFacesColor1(NXColor facePositiveFacesColor1)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setFacePositiveFacesColor2(NXColor facePositiveFacesColor2)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setFaceSelectAllFaces(boolean faceSelectAllFaces)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setFaceSelectCrossoverFaces(boolean faceSelectCrossoverFaces)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setFaceSelectedFacesTranslucency(int faceSelectedFacesTranslucency)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setFaceSelectNegativeFaces1(boolean faceSelectNegativeFaces1)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setFaceSelectNegativeFaces2(boolean faceSelectNegativeFaces2)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setFaceSelectPositiveFaces1(boolean faceSelectPositiveFaces1)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setFaceSelectPositiveFaces2(boolean faceSelectPositiveFaces2)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setFaceSelectUndercutAreas(boolean faceSelectUndercutAreas)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setFaceSelectUndercutEdges(boolean faceSelectUndercutEdges)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setFaceSelectVerticalFaces(boolean faceSelectVerticalFaces)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setFaceUndercutAreasColor(NXColor faceUndercutAreasColor)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setFaceUndercutEdgesColor(NXColor faceUndercutEdgesColor)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setFaceVerticalFacesColor(NXColor faceVerticalFacesColor)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInApplyStatus(int inApplyStatus)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationCheckScope(MWMoldedPartValidationBuilder.CheckScope informationCheckScope)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationColorR01(NXColor informationColorR01)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationColorR02(NXColor informationColorR02)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationColorR03(NXColor informationColorR03)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationColorR04(NXColor informationColorR04)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationColorR05(NXColor informationColorR05)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationColorR06(NXColor informationColorR06)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationColorR07(NXColor informationColorR07)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationColorR08(NXColor informationColorR08)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationColorR09(NXColor informationColorR09)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationColorR10(NXColor informationColorR10)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationColorR11(NXColor informationColorR11)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationColorR12(NXColor informationColorR12)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationLowerLimit(double informationLowerLimit)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationLowerLimitR01(double informationLowerLimitR01)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationLowerLimitR02(double informationLowerLimitR02)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationLowerLimitR03(double informationLowerLimitR03)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationLowerLimitR04(double informationLowerLimitR04)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationLowerLimitR05(double informationLowerLimitR05)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationLowerLimitR06(double informationLowerLimitR06)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationLowerLimitR07(double informationLowerLimitR07)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationLowerLimitR08(double informationLowerLimitR08)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationLowerLimitR09(double informationLowerLimitR09)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationLowerLimitR10(double informationLowerLimitR10)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationLowerLimitR11(double informationLowerLimitR11)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationLowerLimitR12(double informationLowerLimitR12)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationRangeType(MWMoldedPartValidationBuilder.RangeType informationRangeType)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationSharpAngleLimit(double informationSharpAngleLimit)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationShowBoundaryEdges(boolean informationShowBoundaryEdges)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationShowRangeR01(boolean informationShowRangeR01)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationShowRangeR02(boolean informationShowRangeR02)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationShowRangeR03(boolean informationShowRangeR03)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationShowRangeR04(boolean informationShowRangeR04)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationShowRangeR05(boolean informationShowRangeR05)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationShowRangeR06(boolean informationShowRangeR06)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationShowRangeR07(boolean informationShowRangeR07)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationShowRangeR08(boolean informationShowRangeR08)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationShowRangeR09(boolean informationShowRangeR09)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationShowRangeR10(boolean informationShowRangeR10)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationShowRangeR11(boolean informationShowRangeR11)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationShowRangeR12(boolean informationShowRangeR12)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationShowSharpEdges(boolean informationShowSharpEdges)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationUpperLimit(double informationUpperLimit)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationUpperLimitR01(double informationUpperLimitR01)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationUpperLimitR02(double informationUpperLimitR02)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationUpperLimitR03(double informationUpperLimitR03)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationUpperLimitR04(double informationUpperLimitR04)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationUpperLimitR05(double informationUpperLimitR05)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationUpperLimitR06(double informationUpperLimitR06)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationUpperLimitR07(double informationUpperLimitR07)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationUpperLimitR08(double informationUpperLimitR08)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationUpperLimitR09(double informationUpperLimitR09)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationUpperLimitR10(double informationUpperLimitR10)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationUpperLimitR11(double informationUpperLimitR11)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationUpperLimitR12(double informationUpperLimitR12)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setInformationUseSingleTolerance(boolean informationUseSingleTolerance)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setRegionAssignToRegionOption(MWMoldedPartValidationBuilder.AssignToRegion regionAssignToRegionOption)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setRegionCavityRegionColor(NXColor regionCavityRegionColor)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setRegionCavityRegionTranslucency(int regionCavityRegionTranslucency)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setRegionCoreRegionColor(NXColor regionCoreRegionColor)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setRegionCoreRegionTranslucency(int regionCoreRegionTranslucency)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setRegionSelectCrossoverRegionFaces(boolean regionSelectCrossoverRegionFaces)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setRegionSelectCrossoverVerticalFaces(boolean regionSelectCrossoverVerticalFaces)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setRegionSelectUnknownFaces(boolean regionSelectUnknownFaces)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setRegionShowIncompleteLoops(boolean regionShowIncompleteLoops)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setRegionShowInternalLoops(boolean regionShowInternalLoops)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setRegionShowPartingEdges(boolean regionShowPartingEdges)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
setRegionUndefinedRegionColor(NXColor regionUndefinedRegionColor)
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") . |
void |
updateEjectDirection()
Update the eject direction.
|
void |
updateMpvData()
Update the MPV data used in performing analysis in Molded Part Validation whenever there are changes in data on dialog.
|
void |
updateSharpEdgesInformation()
Update the sharp edges information based on the new sharp angle limit which has been changed by the user.
|
void |
updateSmallRadiusFacesInformation()
Update the small radius faces information based on the new range limits of the radius which has been changed by the user.
|
commit, destroy, getCommittedObjects, getObject, showResults
printTestData, printTestData, tag, tagValue
validate
SelectBody calculationProductBody() throws NXException, RemoteException
NXException
RemoteException
nxopen.Direction calculationDrawDirection() throws NXException, RemoteException
NXException
RemoteException
void setCalculationDrawDirection(nxopen.Direction calculationDrawDirection) throws NXException, RemoteException
calculationDrawDirection
- NXException
RemoteException
MWMoldedPartValidationBuilder.CalculateOption calculationOption() throws NXException, RemoteException
NXException
RemoteException
void setCalculationOption(MWMoldedPartValidationBuilder.CalculateOption calculationOption) throws NXException, RemoteException
calculationOption
- NXException
RemoteException
void calculate() throws NXException, RemoteException
NXException
RemoteException
boolean faceHighlightSelectedFaces() throws NXException, RemoteException
NXException
RemoteException
void setFaceHighlightSelectedFaces(boolean faceHighlightSelectedFaces) throws NXException, RemoteException
faceHighlightSelectedFaces
- NXException
RemoteException
double faceDraftAngleLimit() throws NXException, RemoteException
NXException
RemoteException
void setFaceDraftAngleLimit(double faceDraftAngleLimit) throws NXException, RemoteException
faceDraftAngleLimit
- NXException
RemoteException
boolean faceSelectAllFaces() throws NXException, RemoteException
NXException
RemoteException
void setFaceSelectAllFaces(boolean faceSelectAllFaces) throws NXException, RemoteException
faceSelectAllFaces
- NXException
RemoteException
NXColor faceAllFacesColor() throws NXException, RemoteException
NXException
RemoteException
void setFaceAllFacesColor(NXColor faceAllFacesColor) throws NXException, RemoteException
faceAllFacesColor
- NXException
RemoteException
boolean faceSelectPositiveFaces1() throws NXException, RemoteException
NXException
RemoteException
void setFaceSelectPositiveFaces1(boolean faceSelectPositiveFaces1) throws NXException, RemoteException
faceSelectPositiveFaces1
- NXException
RemoteException
NXColor facePositiveFacesColor1() throws NXException, RemoteException
NXException
RemoteException
void setFacePositiveFacesColor1(NXColor facePositiveFacesColor1) throws NXException, RemoteException
facePositiveFacesColor1
- NXException
RemoteException
boolean faceSelectPositiveFaces2() throws NXException, RemoteException
NXException
RemoteException
void setFaceSelectPositiveFaces2(boolean faceSelectPositiveFaces2) throws NXException, RemoteException
faceSelectPositiveFaces2
- NXException
RemoteException
NXColor facePositiveFacesColor2() throws NXException, RemoteException
NXException
RemoteException
void setFacePositiveFacesColor2(NXColor facePositiveFacesColor2) throws NXException, RemoteException
facePositiveFacesColor2
- NXException
RemoteException
boolean faceSelectVerticalFaces() throws NXException, RemoteException
NXException
RemoteException
void setFaceSelectVerticalFaces(boolean faceSelectVerticalFaces) throws NXException, RemoteException
faceSelectVerticalFaces
- NXException
RemoteException
NXColor faceVerticalFacesColor() throws NXException, RemoteException
NXException
RemoteException
void setFaceVerticalFacesColor(NXColor faceVerticalFacesColor) throws NXException, RemoteException
faceVerticalFacesColor
- NXException
RemoteException
boolean faceSelectNegativeFaces1() throws NXException, RemoteException
NXException
RemoteException
void setFaceSelectNegativeFaces1(boolean faceSelectNegativeFaces1) throws NXException, RemoteException
faceSelectNegativeFaces1
- NXException
RemoteException
NXColor faceNegativeFacesColor1() throws NXException, RemoteException
NXException
RemoteException
void setFaceNegativeFacesColor1(NXColor faceNegativeFacesColor1) throws NXException, RemoteException
faceNegativeFacesColor1
- NXException
RemoteException
boolean faceSelectNegativeFaces2() throws NXException, RemoteException
NXException
RemoteException
void setFaceSelectNegativeFaces2(boolean faceSelectNegativeFaces2) throws NXException, RemoteException
faceSelectNegativeFaces2
- NXException
RemoteException
NXColor faceNegativeFacesColor2() throws NXException, RemoteException
NXException
RemoteException
void setFaceNegativeFacesColor2(NXColor faceNegativeFacesColor2) throws NXException, RemoteException
faceNegativeFacesColor2
- NXException
RemoteException
void faceSetAllFacesColor() throws NXException, RemoteException
NXException
RemoteException
boolean faceSelectCrossoverFaces() throws NXException, RemoteException
NXException
RemoteException
void setFaceSelectCrossoverFaces(boolean faceSelectCrossoverFaces) throws NXException, RemoteException
faceSelectCrossoverFaces
- NXException
RemoteException
NXColor faceCrossoverFacesColor() throws NXException, RemoteException
NXException
RemoteException
void setFaceCrossoverFacesColor(NXColor faceCrossoverFacesColor) throws NXException, RemoteException
faceCrossoverFacesColor
- NXException
RemoteException
boolean faceSelectUndercutAreas() throws NXException, RemoteException
NXException
RemoteException
void setFaceSelectUndercutAreas(boolean faceSelectUndercutAreas) throws NXException, RemoteException
faceSelectUndercutAreas
- NXException
RemoteException
NXColor faceUndercutAreasColor() throws NXException, RemoteException
NXException
RemoteException
void setFaceUndercutAreasColor(NXColor faceUndercutAreasColor) throws NXException, RemoteException
faceUndercutAreasColor
- NXException
RemoteException
boolean faceSelectUndercutEdges() throws NXException, RemoteException
NXException
RemoteException
void setFaceSelectUndercutEdges(boolean faceSelectUndercutEdges) throws NXException, RemoteException
faceSelectUndercutEdges
- NXException
RemoteException
NXColor faceUndercutEdgesColor() throws NXException, RemoteException
NXException
RemoteException
void setFaceUndercutEdgesColor(NXColor faceUndercutEdgesColor) throws NXException, RemoteException
faceUndercutEdgesColor
- NXException
RemoteException
int faceSelectedFacesTranslucency() throws NXException, RemoteException
NXException
RemoteException
void setFaceSelectedFacesTranslucency(int faceSelectedFacesTranslucency) throws NXException, RemoteException
faceSelectedFacesTranslucency
- NXException
RemoteException
int faceNonSelectedFacesTranslucency() throws NXException, RemoteException
NXException
RemoteException
void setFaceNonSelectedFacesTranslucency(int faceNonSelectedFacesTranslucency) throws NXException, RemoteException
faceNonSelectedFacesTranslucency
- NXException
RemoteException
void processFaceSplit() throws NXException, RemoteException
NXException
RemoteException
SelectFaceList regionFaces() throws NXException, RemoteException
NXException
RemoteException
NXColor regionCavityRegionColor() throws NXException, RemoteException
NXException
RemoteException
void setRegionCavityRegionColor(NXColor regionCavityRegionColor) throws NXException, RemoteException
regionCavityRegionColor
- NXException
RemoteException
int regionCavityRegionTranslucency() throws NXException, RemoteException
NXException
RemoteException
void setRegionCavityRegionTranslucency(int regionCavityRegionTranslucency) throws NXException, RemoteException
regionCavityRegionTranslucency
- NXException
RemoteException
NXColor regionCoreRegionColor() throws NXException, RemoteException
NXException
RemoteException
void setRegionCoreRegionColor(NXColor regionCoreRegionColor) throws NXException, RemoteException
regionCoreRegionColor
- NXException
RemoteException
int regionCoreRegionTranslucency() throws NXException, RemoteException
NXException
RemoteException
void setRegionCoreRegionTranslucency(int regionCoreRegionTranslucency) throws NXException, RemoteException
regionCoreRegionTranslucency
- NXException
RemoteException
NXColor regionUndefinedRegionColor() throws NXException, RemoteException
NXException
RemoteException
void setRegionUndefinedRegionColor(NXColor regionUndefinedRegionColor) throws NXException, RemoteException
regionUndefinedRegionColor
- NXException
RemoteException
void regionSetRegionsColor() throws NXException, RemoteException
NXException
RemoteException
boolean regionSelectCrossoverRegionFaces() throws NXException, RemoteException
NXException
RemoteException
void setRegionSelectCrossoverRegionFaces(boolean regionSelectCrossoverRegionFaces) throws NXException, RemoteException
regionSelectCrossoverRegionFaces
- NXException
RemoteException
boolean regionSelectCrossoverVerticalFaces() throws NXException, RemoteException
NXException
RemoteException
void setRegionSelectCrossoverVerticalFaces(boolean regionSelectCrossoverVerticalFaces) throws NXException, RemoteException
regionSelectCrossoverVerticalFaces
- NXException
RemoteException
boolean regionSelectUnknownFaces() throws NXException, RemoteException
NXException
RemoteException
void setRegionSelectUnknownFaces(boolean regionSelectUnknownFaces) throws NXException, RemoteException
regionSelectUnknownFaces
- NXException
RemoteException
MWMoldedPartValidationBuilder.AssignToRegion regionAssignToRegionOption() throws NXException, RemoteException
NXException
RemoteException
void setRegionAssignToRegionOption(MWMoldedPartValidationBuilder.AssignToRegion regionAssignToRegionOption) throws NXException, RemoteException
regionAssignToRegionOption
- NXException
RemoteException
boolean regionShowInternalLoops() throws NXException, RemoteException
NXException
RemoteException
void setRegionShowInternalLoops(boolean regionShowInternalLoops) throws NXException, RemoteException
regionShowInternalLoops
- NXException
RemoteException
boolean regionShowPartingEdges() throws NXException, RemoteException
NXException
RemoteException
void setRegionShowPartingEdges(boolean regionShowPartingEdges) throws NXException, RemoteException
regionShowPartingEdges
- NXException
RemoteException
boolean regionShowIncompleteLoops() throws NXException, RemoteException
NXException
RemoteException
void setRegionShowIncompleteLoops(boolean regionShowIncompleteLoops) throws NXException, RemoteException
regionShowIncompleteLoops
- NXException
RemoteException
MWMoldedPartValidationBuilder.CheckScope informationCheckScope() throws NXException, RemoteException
NXException
RemoteException
void setInformationCheckScope(MWMoldedPartValidationBuilder.CheckScope informationCheckScope) throws NXException, RemoteException
informationCheckScope
- NXException
RemoteException
SelectFace informationInspectFace() throws NXException, RemoteException
NXException
RemoteException
boolean informationShowBoundaryEdges() throws NXException, RemoteException
NXException
RemoteException
void setInformationShowBoundaryEdges(boolean informationShowBoundaryEdges) throws NXException, RemoteException
informationShowBoundaryEdges
- NXException
RemoteException
double informationSharpAngleLimit() throws NXException, RemoteException
NXException
RemoteException
void setInformationSharpAngleLimit(double informationSharpAngleLimit) throws NXException, RemoteException
informationSharpAngleLimit
- NXException
RemoteException
boolean informationShowSharpEdges() throws NXException, RemoteException
NXException
RemoteException
void setInformationShowSharpEdges(boolean informationShowSharpEdges) throws NXException, RemoteException
informationShowSharpEdges
- NXException
RemoteException
MWMoldedPartValidationBuilder.RangeType informationRangeType() throws NXException, RemoteException
NXException
RemoteException
void setInformationRangeType(MWMoldedPartValidationBuilder.RangeType informationRangeType) throws NXException, RemoteException
informationRangeType
- NXException
RemoteException
double informationUpperLimit() throws NXException, RemoteException
NXException
RemoteException
void setInformationUpperLimit(double informationUpperLimit) throws NXException, RemoteException
informationUpperLimit
- NXException
RemoteException
boolean informationUseSingleTolerance() throws NXException, RemoteException
NXException
RemoteException
void setInformationUseSingleTolerance(boolean informationUseSingleTolerance) throws NXException, RemoteException
informationUseSingleTolerance
- NXException
RemoteException
boolean informationShowRangeR01() throws NXException, RemoteException
NXException
RemoteException
void setInformationShowRangeR01(boolean informationShowRangeR01) throws NXException, RemoteException
informationShowRangeR01
- NXException
RemoteException
double informationLowerLimitR01() throws NXException, RemoteException
NXException
RemoteException
void setInformationLowerLimitR01(double informationLowerLimitR01) throws NXException, RemoteException
informationLowerLimitR01
- NXException
RemoteException
double informationUpperLimitR01() throws NXException, RemoteException
NXException
RemoteException
void setInformationUpperLimitR01(double informationUpperLimitR01) throws NXException, RemoteException
informationUpperLimitR01
- NXException
RemoteException
NXColor informationColorR01() throws NXException, RemoteException
NXException
RemoteException
void setInformationColorR01(NXColor informationColorR01) throws NXException, RemoteException
informationColorR01
- NXException
RemoteException
boolean informationShowRangeR02() throws NXException, RemoteException
NXException
RemoteException
void setInformationShowRangeR02(boolean informationShowRangeR02) throws NXException, RemoteException
informationShowRangeR02
- NXException
RemoteException
double informationLowerLimitR02() throws NXException, RemoteException
NXException
RemoteException
void setInformationLowerLimitR02(double informationLowerLimitR02) throws NXException, RemoteException
informationLowerLimitR02
- NXException
RemoteException
double informationUpperLimitR02() throws NXException, RemoteException
NXException
RemoteException
void setInformationUpperLimitR02(double informationUpperLimitR02) throws NXException, RemoteException
informationUpperLimitR02
- NXException
RemoteException
NXColor informationColorR02() throws NXException, RemoteException
NXException
RemoteException
void setInformationColorR02(NXColor informationColorR02) throws NXException, RemoteException
informationColorR02
- NXException
RemoteException
boolean informationShowRangeR03() throws NXException, RemoteException
NXException
RemoteException
void setInformationShowRangeR03(boolean informationShowRangeR03) throws NXException, RemoteException
informationShowRangeR03
- NXException
RemoteException
double informationLowerLimitR03() throws NXException, RemoteException
NXException
RemoteException
void setInformationLowerLimitR03(double informationLowerLimitR03) throws NXException, RemoteException
informationLowerLimitR03
- NXException
RemoteException
double informationUpperLimitR03() throws NXException, RemoteException
NXException
RemoteException
void setInformationUpperLimitR03(double informationUpperLimitR03) throws NXException, RemoteException
informationUpperLimitR03
- NXException
RemoteException
NXColor informationColorR03() throws NXException, RemoteException
NXException
RemoteException
void setInformationColorR03(NXColor informationColorR03) throws NXException, RemoteException
informationColorR03
- NXException
RemoteException
boolean informationShowRangeR04() throws NXException, RemoteException
NXException
RemoteException
void setInformationShowRangeR04(boolean informationShowRangeR04) throws NXException, RemoteException
informationShowRangeR04
- NXException
RemoteException
double informationLowerLimitR04() throws NXException, RemoteException
NXException
RemoteException
void setInformationLowerLimitR04(double informationLowerLimitR04) throws NXException, RemoteException
informationLowerLimitR04
- NXException
RemoteException
double informationUpperLimitR04() throws NXException, RemoteException
NXException
RemoteException
void setInformationUpperLimitR04(double informationUpperLimitR04) throws NXException, RemoteException
informationUpperLimitR04
- NXException
RemoteException
NXColor informationColorR04() throws NXException, RemoteException
NXException
RemoteException
void setInformationColorR04(NXColor informationColorR04) throws NXException, RemoteException
informationColorR04
- NXException
RemoteException
boolean informationShowRangeR05() throws NXException, RemoteException
NXException
RemoteException
void setInformationShowRangeR05(boolean informationShowRangeR05) throws NXException, RemoteException
informationShowRangeR05
- NXException
RemoteException
double informationLowerLimitR05() throws NXException, RemoteException
NXException
RemoteException
void setInformationLowerLimitR05(double informationLowerLimitR05) throws NXException, RemoteException
informationLowerLimitR05
- NXException
RemoteException
double informationUpperLimitR05() throws NXException, RemoteException
NXException
RemoteException
void setInformationUpperLimitR05(double informationUpperLimitR05) throws NXException, RemoteException
informationUpperLimitR05
- NXException
RemoteException
NXColor informationColorR05() throws NXException, RemoteException
NXException
RemoteException
void setInformationColorR05(NXColor informationColorR05) throws NXException, RemoteException
informationColorR05
- NXException
RemoteException
boolean informationShowRangeR06() throws NXException, RemoteException
NXException
RemoteException
void setInformationShowRangeR06(boolean informationShowRangeR06) throws NXException, RemoteException
informationShowRangeR06
- NXException
RemoteException
double informationLowerLimitR06() throws NXException, RemoteException
NXException
RemoteException
void setInformationLowerLimitR06(double informationLowerLimitR06) throws NXException, RemoteException
informationLowerLimitR06
- NXException
RemoteException
double informationUpperLimitR06() throws NXException, RemoteException
NXException
RemoteException
void setInformationUpperLimitR06(double informationUpperLimitR06) throws NXException, RemoteException
informationUpperLimitR06
- NXException
RemoteException
NXColor informationColorR06() throws NXException, RemoteException
NXException
RemoteException
void setInformationColorR06(NXColor informationColorR06) throws NXException, RemoteException
informationColorR06
- NXException
RemoteException
boolean informationShowRangeR07() throws NXException, RemoteException
NXException
RemoteException
void setInformationShowRangeR07(boolean informationShowRangeR07) throws NXException, RemoteException
informationShowRangeR07
- NXException
RemoteException
double informationLowerLimitR07() throws NXException, RemoteException
NXException
RemoteException
void setInformationLowerLimitR07(double informationLowerLimitR07) throws NXException, RemoteException
informationLowerLimitR07
- NXException
RemoteException
double informationUpperLimitR07() throws NXException, RemoteException
NXException
RemoteException
void setInformationUpperLimitR07(double informationUpperLimitR07) throws NXException, RemoteException
informationUpperLimitR07
- NXException
RemoteException
NXColor informationColorR07() throws NXException, RemoteException
NXException
RemoteException
void setInformationColorR07(NXColor informationColorR07) throws NXException, RemoteException
informationColorR07
- NXException
RemoteException
boolean informationShowRangeR08() throws NXException, RemoteException
NXException
RemoteException
void setInformationShowRangeR08(boolean informationShowRangeR08) throws NXException, RemoteException
informationShowRangeR08
- NXException
RemoteException
double informationLowerLimitR08() throws NXException, RemoteException
NXException
RemoteException
void setInformationLowerLimitR08(double informationLowerLimitR08) throws NXException, RemoteException
informationLowerLimitR08
- NXException
RemoteException
double informationUpperLimitR08() throws NXException, RemoteException
NXException
RemoteException
void setInformationUpperLimitR08(double informationUpperLimitR08) throws NXException, RemoteException
informationUpperLimitR08
- NXException
RemoteException
NXColor informationColorR08() throws NXException, RemoteException
NXException
RemoteException
void setInformationColorR08(NXColor informationColorR08) throws NXException, RemoteException
informationColorR08
- NXException
RemoteException
boolean informationShowRangeR09() throws NXException, RemoteException
NXException
RemoteException
void setInformationShowRangeR09(boolean informationShowRangeR09) throws NXException, RemoteException
informationShowRangeR09
- NXException
RemoteException
double informationLowerLimitR09() throws NXException, RemoteException
NXException
RemoteException
void setInformationLowerLimitR09(double informationLowerLimitR09) throws NXException, RemoteException
informationLowerLimitR09
- NXException
RemoteException
double informationUpperLimitR09() throws NXException, RemoteException
NXException
RemoteException
void setInformationUpperLimitR09(double informationUpperLimitR09) throws NXException, RemoteException
informationUpperLimitR09
- NXException
RemoteException
NXColor informationColorR09() throws NXException, RemoteException
NXException
RemoteException
void setInformationColorR09(NXColor informationColorR09) throws NXException, RemoteException
informationColorR09
- NXException
RemoteException
boolean informationShowRangeR10() throws NXException, RemoteException
NXException
RemoteException
void setInformationShowRangeR10(boolean informationShowRangeR10) throws NXException, RemoteException
informationShowRangeR10
- NXException
RemoteException
double informationLowerLimitR10() throws NXException, RemoteException
NXException
RemoteException
void setInformationLowerLimitR10(double informationLowerLimitR10) throws NXException, RemoteException
informationLowerLimitR10
- NXException
RemoteException
double informationUpperLimitR10() throws NXException, RemoteException
NXException
RemoteException
void setInformationUpperLimitR10(double informationUpperLimitR10) throws NXException, RemoteException
informationUpperLimitR10
- NXException
RemoteException
NXColor informationColorR10() throws NXException, RemoteException
NXException
RemoteException
void setInformationColorR10(NXColor informationColorR10) throws NXException, RemoteException
informationColorR10
- NXException
RemoteException
boolean informationShowRangeR11() throws NXException, RemoteException
NXException
RemoteException
void setInformationShowRangeR11(boolean informationShowRangeR11) throws NXException, RemoteException
informationShowRangeR11
- NXException
RemoteException
double informationLowerLimitR11() throws NXException, RemoteException
NXException
RemoteException
void setInformationLowerLimitR11(double informationLowerLimitR11) throws NXException, RemoteException
informationLowerLimitR11
- NXException
RemoteException
double informationUpperLimitR11() throws NXException, RemoteException
NXException
RemoteException
void setInformationUpperLimitR11(double informationUpperLimitR11) throws NXException, RemoteException
informationUpperLimitR11
- NXException
RemoteException
NXColor informationColorR11() throws NXException, RemoteException
NXException
RemoteException
void setInformationColorR11(NXColor informationColorR11) throws NXException, RemoteException
informationColorR11
- NXException
RemoteException
boolean informationShowRangeR12() throws NXException, RemoteException
NXException
RemoteException
void setInformationShowRangeR12(boolean informationShowRangeR12) throws NXException, RemoteException
informationShowRangeR12
- NXException
RemoteException
double informationLowerLimitR12() throws NXException, RemoteException
NXException
RemoteException
void setInformationLowerLimitR12(double informationLowerLimitR12) throws NXException, RemoteException
informationLowerLimitR12
- NXException
RemoteException
double informationUpperLimitR12() throws NXException, RemoteException
NXException
RemoteException
void setInformationUpperLimitR12(double informationUpperLimitR12) throws NXException, RemoteException
informationUpperLimitR12
- NXException
RemoteException
NXColor informationColorR12() throws NXException, RemoteException
NXException
RemoteException
void setInformationColorR12(NXColor informationColorR12) throws NXException, RemoteException
informationColorR12
- NXException
RemoteException
double informationLowerLimit() throws NXException, RemoteException
NXException
RemoteException
void setInformationLowerLimit(double informationLowerLimit) throws NXException, RemoteException
informationLowerLimit
- NXException
RemoteException
int inApplyStatus() throws NXException, RemoteException
NXException
RemoteException
void setInApplyStatus(int inApplyStatus) throws NXException, RemoteException
inApplyStatus
- NXException
RemoteException
int activeTabPage() throws NXException, RemoteException
NXException
RemoteException
void setActiveTabPage(int activeTabPage) throws NXException, RemoteException
activeTabPage
- NXException
RemoteException
void updateEjectDirection() throws NXException, RemoteException
NXException
RemoteException
void initMpvData(int changeBody) throws NXException, RemoteException
changeBody
- 0: No change in the selected body; 1: Change in the selected body; 2: Change in direction for the selected body.NXException
RemoteException
void updateMpvData() throws NXException, RemoteException
NXException
RemoteException
void performModelPropertiesCalculation() throws NXException, RemoteException
NXException
RemoteException
void performSharpCornersCalculation() throws NXException, RemoteException
NXException
RemoteException
void updateSharpEdgesInformation() throws NXException, RemoteException
NXException
RemoteException
void updateSmallRadiusFacesInformation() throws NXException, RemoteException
NXException
RemoteException
void setCalculationProductBody(Body calculationProductBody) throws NXException, RemoteException
calculationProductBody
- The product bodyNXException
RemoteException
Copyright 2011 Siemens Product Lifecycle Management Software Inc. All Rights Reserved.