public interface FeatureCollection extends TaggedObjectCollection
Part
Modifier and Type | Interface and Description |
---|---|
static class |
FeatureCollection.CreateIntersectFeatureData
This class holds the data returned from
createIntersectFeature(nxopen.Body, boolean, nxopen.Body[], boolean, boolean) |
static class |
FeatureCollection.CreateSubtractFeatureData
This class holds the data returned from
createSubtractFeature(nxopen.Body, boolean, nxopen.Body[], boolean, boolean) |
static class |
FeatureCollection.CreateUniteFeatureData
This class holds the data returned from
createUniteFeature(nxopen.Body, boolean, nxopen.Body[], boolean, boolean) |
static class |
FeatureCollection.ReorderType
Reorder operation type.
|
TaggedObjectCollection.Iterator
Modifier and Type | Method and Description |
---|---|
FeatureGroup |
activeGroup()
Returns the active feature group.
|
AeroCollection |
aeroCollection()
Returns the AeroCollection instance belonging to this part .
|
AeroSheetmetalManager |
aeroSheetmetalManager()
Returns the aerospace sheet metal manager for this part .
|
AutomotiveCollection |
automotiveCollection()
Returns the AutomotiveCollection instance belonging to this part .
|
void |
convertToFloatingFeatureGroups()
Converts sequential feature groups to floating feature groups
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
convertToNewFeatureGroups()
Deprecated.
Deprecated in NX8.0.0. Use
convertToSequentialFeatureGroups() or convertToFloatingFeatureGroups() instead.
|
void |
convertToSequentialFeatureGroups()
Converts floating feature groups to sequential feature groups
License requirements: solid_modeling ("SOLIDS MODELING") . |
AdaptiveShellBuilder |
createAdaptiveShellBuilder(AdaptiveShell shellFace)
Creates a
AdaptiveShellBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") Created in NX6.0.0 |
AdmMoveFaceBuilder |
createAdmMoveFaceBuilder(AdmMoveFace admMoveFace)
Creates a
AdmMoveFaceBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") Created in NX6.0.0 |
AdmOffsetRegionBuilder |
createAdmOffsetRegionBuilder(AdmOffsetRegion offsetRegion)
Creates a
AdmOffsetRegionBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") Created in NX6.0.0 |
AdmResizeFaceBuilder |
createAdmResizeFaceBuilder(AdmResizeFace admResizeFace)
Creates a
AdmResizeFaceBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") Created in NX6.0.0 |
AestheticFaceBlendBuilder |
createAestheticFaceBlendBuilder(AestheticFaceBlend aestheticFaceBlend)
Creates a
AestheticFaceBlendBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM") Created in NX7.5.0 |
AnalyzePocketBuilder |
createAnalyzePocketBuilder(AnalyzePocket analyzePocket)
Creates a
AnalyzePocketBuilder
License requirements: nx_aero_design (" NX Aero Design") Created in NX9.0.0 |
AngularDimBuilder |
createAngularDimensionBuilder(AngularDim angularDimension)
Creates a
AngularDimBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") Created in NX6.0.0 |
AOCSBuilder |
createAocsBuilder(Feature aocs)
Creates an Offset In Face builder
License requirements: solid_modeling ("SOLIDS MODELING") . |
AssemblyCutBuilder |
createAssemblyCutBuilder(AssemblyCut assemblyCut)
Creates a
AssemblyCutBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX6.0.0 |
BlendPocketBuilder |
createBlendPocketBuilder(BlendPocket blendPocket)
Creates a
BlendPocketBuilder
License requirements: nx_aero_design (" NX Aero Design") Created in NX9.0.0 |
BlockFeatureBuilder |
createBlockFeatureBuilder(Feature block)
Creates a Block feature builder
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") . |
BooleanBuilder |
createBooleanBuilder(BooleanFeature booleanFeature)
Creates a Boolean builder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") . |
BooleanBuilder |
createBooleanBuilderUsingCollector(BooleanFeature booleanFeature)
Creates a Boolean builder.
|
BoundedPlaneBuilder |
createBoundedPlaneBuilder(BoundedPlane boundedPlane)
Creates a
BoundedPlaneBuilder
License requirements: nx_freeform_1 ("basic freeform modeling") Created in NX6.0.0 |
BridgeCurveBuilder |
createBridgeCurveBuilder(Feature bridgeCurve)
Deprecated.
Deprecated in NX8.5.0. Use
createBridgeCurveBuilderEx(nxopen.features.BridgeCurve) instead.
|
BridgeCurveBuilderEx |
createBridgeCurveBuilderEx(BridgeCurve bridgeCurve)
Creates a
BridgeCurveBuilderEx
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_1 ("basic freeform modeling") Created in NX8.5.0 |
BridgeSurfaceBuilder |
createBridgeSurfaceBuilder(BridgeSurface bridgeSurface)
Creates a
BridgeSurfaceBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX8.0.0 |
ChamferBuilder |
createChamferBuilder(Feature chamfer)
Creates a Chamfer feature builder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") . |
ChangeShellThicknessBuilder |
createChangeShellThicknessBuilder(ChangeShellThickness shellFace)
Creates a
ChangeShellThicknessBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") Created in NX6.0.0 |
CircularBlendCurveBuilder |
createCircularBlendCurveBuilder(CircularBlendCurve circularBlendCurve)
Creates a
CircularBlendCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX5.0.0 |
CoaxialBuilder |
createCoaxialBuilder(Coaxial coaxial)
Creates a
CoaxialBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") Created in NX6.0.0 |
ColorFaceBuilder |
createColorFaceBuilder()
Creates a
ColorFaceBuilder
License requirements: None. |
ColorFeatureBuilder |
createColorFeatureBuilder()
Creates a
nxopen.features.ColorFeatureBuilder
License requirements: None. |
ColorFeatureGroupBuilder |
createColorFeatureGroupBuilder()
Creates a
nxopen.features.ColorFeatureGroupBuilder
License requirements: None. |
CombinedProjectionBuilder |
createCombinedProjectionBuilder(CombinedProjection combinedProjection)
Creates a
CombinedProjectionBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX6.0.0 |
CompositeCurveBuilder |
createCompositeCurveBuilder(Feature compositeCurve)
Creates a
CompositeCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") Created in NX5.0.0 |
ConcaveFacesBuilder |
createConcaveFacesBuilder(ConcaveFaces concaveFaces)
Creates a
ConcaveFacesBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX7.5.0 |
ConeBuilder |
createConeBuilder(Cone cone)
|
ConvertFeatureGroupsToModulesBuilder |
createConvertFeatureGroupsToModulesBuilder()
Creates a
ConvertFeatureGroupsToModulesBuilder
License requirements: usr_defined_features ("USER DEFINED FEATURES") Created in NX9.0.0 |
CoplanarBuilder |
createCoplanarBuilder(Feature coplanar)
Creates a coplanar builder, don't use it until nx6
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") . |
CopyFaceBuilder |
createCopyFaceBuilder(Feature copyFace)
Creates a copy face builder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") . |
CopyPasteBuilder |
createCopyPasteBuilder(NXObject[] features)
Creates a
CopyPasteBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX6.0.0 |
CopyPasteBuilder |
createCopyPasteBuilder2(NXObject[] features)
Creates a
CopyPasteBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX8.0.0 |
CurveLengthBuilder |
createCurvelengthBuilder(Feature curvelength)
Creates a Curvelength builder
License requirements: solid_modeling ("SOLIDS MODELING") . |
CurveOnSurfaceBuilder |
createCurveOnSurfaceBuilder(CurveOnSurface cosFeature)
Creates a Curve On Surface feature builder
License requirements: solid_modeling ("SOLIDS MODELING") . |
CutFaceBuilder |
createCutFaceBuilder(Feature cutFace)
Creates a cut face builder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") . |
CylinderBuilder |
createCylinderBuilder(Feature cylinder)
Creates a
CylinderBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") Created in NX5.0.0 |
DatumAxisBuilder |
createDatumAxisBuilder(Feature datumAxis)
Creates a Datum Axis feature builder
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
DatumCsysBuilder |
createDatumCsysBuilder(Feature datumCsys)
Creates a Datum CSYS feature builder
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") . |
DatumPlaneBuilder |
createDatumPlaneBuilder(Feature dplane)
Creates a Datum Plane feature builder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") . |
DeleteBodyBuilder |
createDeleteBodyBuilder(DeleteBody deleteBody)
Creates a
DeleteBodyBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") Created in NX8.5.0 |
DeleteEdgeBuilder |
createDeleteEdgeBuilder(DeleteEdge deleteEdge)
Creates a
DeleteEdgeBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX8.0.0 |
DeleteFaceBuilder |
createDeleteFaceBuilder(Feature deleteFace)
Creates a delete face builder, don't use it until nx502
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") . |
DividefaceBuilder |
createDividefaceBuilder(Feature divideface)
Creates a Divideface builder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") . |
DraftBodyBuilder |
createDraftBodyBuilder(Feature draftBody)
Creates a
DraftBodyBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") Created in NX5.0.0 |
DraftBuilder |
createDraftBuilder(Feature draft)
Creates a draft builder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") . |
DraftingSplineBuilder |
createDraftingSplineBuilder(Spline spline)
Creates a Studio Spline builder for drafting
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") . |
EdgeBlendBuilder |
createEdgeBlendBuilder(Feature edgeblend)
Creates a Edge Blend feature builder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") . |
EdgeSymmetryBuilder |
createEdgeSymmetryBuilder(Feature edgeSymmetry)
Creates a
EdgeSymmetryBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM") Created in NX7.0.0 |
EditCrossSectionBuilder |
createEditCrossSectionBuilder(EditCrossSection editCrossSection)
Creates a
EditCrossSectionBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") Created in NX8.0.0 |
EditDimensionBuilder |
createEditDimensionBuilder()
Creates a
EditDimensionBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") Created in NX6.0.0 |
EmbossBodyBuilder |
createEmbossBodyBuilder(EmbossBody embossBody)
Creates a
EmbossBodyBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX8.5.0 |
EmbossBuilder |
createEmbossBuilder(Feature emboss)
Creates an Emboss builder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") . |
EnlargeBuilder |
createEnlargeBuilder(Enlarge enlargeFeature)
Creates an Enlarge builder
License requirements: nx_freeform_2 ("advanced freeform modeling") . |
ExtensionBuilder |
createExtensionBuilder(Extension extension)
Creates a
ExtensionBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING") Created in NX8.0.0 |
ExtractFaceBuilder |
createExtractFaceBuilder(Feature copyFace)
Creates a
ExtractFaceBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") Created in NX5.0.0 |
ExtrudeBuilder |
createExtrudeBuilder(Feature extrude)
Creates a Extrude builder
License requirements: solid_modeling ("SOLIDS MODELING") . |
FaceBlendBuilder |
createFaceBlendBuilder(Feature faceBlend)
Creates a Face Blend feature builder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") . |
FeatureReplayBuilder |
createFeatureReplayBuilder()
Creates a
FeatureReplayBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX6.0.0 |
FitCurveBuilder |
createFitCurveBuilder(FitCurve fitCurve)
Creates a
FitCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX8.5.0 |
FitSurfaceBuilder |
createFitSurfaceBuilder(FitSurface fitSurface)
Creates a
FitSurfaceBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM") Created in NX8.5.0 |
FixedBuilder |
createFixedBuilder(Fixed makeFix)
Creates a
FixedBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") Created in NX7.0.0 |
FlowBlendBuilder |
createFlowBlendBuilder(FlowBlend flowBlend)
Creates a
Features.FlowBlendBuilder
License requirements: flow_blend_for_nx (" Flow Blend"), solid_modeling ("SOLIDS MODELING") Created in NX10.0.0 |
FreeTransformerBuilder |
createFreeTransformerBuilder(Feature freeTransformer)
Creates a
FreeTransformerBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX10.0.0 |
GeneralConicBuilder |
createGeneralConicBuilder(GeneralConic generalConic)
Creates a
GeneralConicBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") Created in NX8.5.0 |
GeomcopyBuilder |
createGeomcopyBuilder(Feature geomcopy)
Creates a
GeomcopyBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX5.0.0 |
GlobalShapingBuilder |
createGlobalShapingBuilder(GlobalShaping globalShaping)
Creates a
GlobalShapingBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX5.0.0 |
GroupFaceBuilder |
createGroupFaceBuilder(GroupFace groupFace)
Creates a
GroupFaceBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") Created in NX6.0.0 |
GuidedExtensionBuilderEx |
createGuidedExtensionBuilderEx(Feature guidedExtension)
Creates a
GuidedExtensionBuilderEx
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX10.0.0 |
HelixBuilder |
createHelixBuilder(Helix helix)
|
HoleFeatureBuilder |
createHoleFeatureBuilder(Feature hole)
Creates a Hole feature builder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") . |
HolePackageBuilder |
createHolePackageBuilder(HolePackage holePackage)
Creates a
HolePackageBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX5.0.2 |
FeatureBuilder |
createHoodVisibilityBuilder(Feature hoodVisibility)
Deprecated.
Deprecated in NX9.0.0. Use
nxopen.features.vehicledesignCollection#createHoodVisibilityBuilder instead.
|
HumanBuilder |
createHumanBuilder(Feature human)
Creates a human feature builder.
|
HumanPosturePredictionBuilder |
createHumanPosturePredictionBuilder(HumanPosturePrediction posturePrediction)
Creates a human posture prediction builder.
|
IFormBuilder |
createIformBuilder(IForm iform)
Creates a
IFormBuilder
License requirements: studio_free_form ("STUDIO FREE FORM") Created in NX7.5.0 |
InstanceFeatureBuilder |
createInstanceFeatureBuilder(InstanceFeature instanceFeature)
Creates
nxopen.features.InstanceFeatureBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX8.0.0 |
InstanceFeatureBuilder |
createInstanceFeatureBuilder(InstanceFeature[] instanceFeatures,
boolean forClocking)
Creates
nxopen.features.InstanceFeatureBuilder from multiple nxopen.features.InstanceFeature
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX8.0.0 |
FeatureCollection.CreateIntersectFeatureData |
createIntersectFeature(Body targetBody,
boolean retainTargetBody,
Body[] toolBodies,
boolean retainToolBodies,
boolean allowNonAssociativeBoolean)
Creates an intersect feature.
|
IntersectionCurveBuilder |
createIntersectionCurveBuilder(Feature intersectionCurve)
Creates a
IntersectionCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX5.0.0 |
IsolateFeatureBuilder |
createIsolateFeatureBuilder(IsolateFeature isolateFeature)
Creates a
nxopen.features.IsolateFeatureBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX8.5.0 |
IsoparametricCurvesBuilder |
createIsoparametricCurvesBuilder(IsoparametricCurves isoparametricCurves)
Creates a
IsoparametricCurvesBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX8.0.0 |
JoinCurvesBuilder |
createJoinCurvesBuilder(Feature joinCurves)
Creates a
JoinCurvesBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") Created in NX5.0.0 |
LabelChamferBuilder |
createLabelChamferBuilder(LabelChamfer labelChamfer)
Creates a
LabelChamferBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") Created in NX7.0.0 |
LabelNotchBlendBuilder |
createLabelNotchBlendBuilder(LabelNotchBlend labelNotchBlend)
Creates a
LabelNotchBlendBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") Created in NX8.0.0 |
LawCurveBuilder |
createLawCurveBuilder(LawCurve lawCurve)
Creates a
LawCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX7.5.1 |
LawExtensionBuilder |
createLawExtensionBuilder(LawExtension lawExtension)
Creates a
LawExtensionBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX6.0.0 |
LawExtensionBuilderEx |
createLawExtensionBuilderEx(Feature lawExtension)
Creates a
LawExtensionBuilderEx
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX8.5.0 |
LinearDimensionBuilder |
createLinearDimensionBuilder(LinearDimension linearDimension)
Creates a
LinearDimensionBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") Created in NX6.0.0 |
LinkedFacetBuilder |
createLinkedFacetBuilder(LinkedFacet linkedFacet)
Creates a
LinkedFacetBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX6.0.0 |
MakeOffsetBuilder |
createMakeOffsetBuilder(MakeOffset makeOffset)
Creates a
MakeOffsetBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") Created in NX7.0.0 |
MapleBuilder |
createMapleBuilder(Maple maple)
|
MasterCutBuilder |
createMasterCutBuilder(Feature masterCut)
Create a Master Cut builder
License requirements: solid_modeling ("SOLIDS MODELING") . |
MatchEdgeBuilder |
createMatchEdgeBuilder(MatchEdge matchEdge)
Creates a
MatchEdgeBuilder
License requirements: features_modeling ("FEATURES MODELING") Created in NX6.0.0 |
MeshSurfaceBuilder |
createMeshSurfaceBuilder(Feature meshSurf)
Creates a Mesh Surface feature builder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") . |
MeshTransformerBuilder |
createMeshTransformerBuilder(Feature meshTransformer)
Creates a
MeshTransformerBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX10.0.0 |
MidSurfaceByFacePairsBuilder |
createMidSurfaceByFacePairsBuilder(Feature midSurfaceByFacePairs)
Creates a
MidSurfaceByFacePairsBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX7.5.0 |
MidSurfaceUserDefinedBuilder |
createMidSurfaceUserDefinedBuilder(MidSurfaceUserDefined midsurfaceUserDefined)
Creates a
MidSurfaceUserDefinedBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX7.5.0 |
MirrorBodyBuilder |
createMirrorBodyBuilder(Feature mirrorBody)
Creates a
MirrorBodyBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") Created in NX5.0.0 |
MirrorBuilder |
createMirrorBuilder(Mirror mirrorFeature)
|
MirrorCurveBuilder |
createMirrorCurveBuilder(Feature mirrorCurve)
Creates a
MirrorCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX6.0.0 |
MirrorFaceBuilder |
createMirrorFaceBuilder(Feature mirrorFace)
Creates a mirror face builder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") . |
MirrorFeatureBuilder |
createMirrorFeatureBuilder(Feature mirrorFea)
Creates
nxopen.features.MirrorFeatureBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX5.0.0 |
MoveFaceBuilder |
createMoveFaceBuilder(Feature moveFace)
Create a move face builder, don't use it until nx502
License requirements: solid_modeling ("SOLIDS MODELING") . |
NestModuleBuilder |
createNestModuleBuilder()
Deprecated.
Deprecated in NX10.0.0. Please use
FeatureCollection instead.
|
NSidedSurfaceBuilder |
createNSidedSurfaceBuilder(NSidedSurface nsidedSurface)
Creates a
NSidedSurfaceBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM") Created in NX6.0.0 |
OffsetCurveBuilder |
createOffsetCurveBuilder(Feature offsetCurve)
Creates a
OffsetCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") Created in NX5.0.0 |
OffsetEmbossBuilder |
createOffsetEmbossBuilder(Feature offsetEmboss)
Creates a Offsetemboss builder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") . |
OffsetFaceBuilder |
createOffsetFaceBuilder(Feature offsetface)
Creates a
OffsetFaceBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX5.0.0 |
OffsetRegionBuilder |
createOffsetRegionBuilder(Feature offsetRegion)
Creates an offset region builder, don't use it until nx502
License requirements: solid_modeling ("SOLIDS MODELING") . |
OffsetSurfaceBuilder |
createOffsetSurfaceBuilder(Feature offsetSurface)
Creates an Offset Surface builder
License requirements: solid_modeling ("SOLIDS MODELING") . |
OptimizeCurveBuilder |
createOptimizeCurveBuilder()
Creates a
OptimizeCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX10.0.0 |
OptimizeFaceBuilder |
createOptimizeFaceBuilder()
Creates a
OptimizeFaceBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") Created in NX7.0.0 |
OvercrownBuilder |
createOvercrownFeatureBuilder(Feature overcrown)
Creates a Overcrown feature builder
License requirements: solid_modeling ("SOLIDS MODELING") . |
PaintParametersBuilder |
createPaintParametersBuilder()
Creates a
PaintParametersBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX9.0.0 |
ParallelBuilder |
createParallelBuilder(Parallel parallel)
Creates a
ParallelBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") Created in NX6.0.0 |
PartModuleBuilder |
createPartModuleBuilder(PartModule partModule)
Creates a
PartModuleBuilder
License requirements: usr_defined_features ("USER DEFINED FEATURES") Created in NX8.0.0 |
PartModuleRelationshipBuilder |
createPartModuleRelationshipBuilder(PartModule partModule)
Creates a
PartModuleRelationshipBuilder
License requirements: usr_defined_features ("USER DEFINED FEATURES") Created in NX8.0.0 |
PasteFaceBuilder |
createPasteFaceBuilder(Feature pasteFace)
Creates a paste face builder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") . |
PatchBuilder |
createPatchBuilder(Feature patch)
|
PatchOpeningsBuilder |
createPatchOpeningsBuilder(Feature patchOpenings)
Creates a
PatchOpeningsBuilder
License requirements: None. |
PatternFaceBuilder |
createPatternFaceBuilder(Feature patternFace)
Creates a pattern face builder, don't use it until nx502
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") . |
PatternFaceFeatureBuilder |
createPatternFaceFeatureBuilder(PatternFaceFeature patternFaceFeature)
Creates a
nxopen.features.PatternFaceFeatureBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") Created in NX9.0.0 |
PatternFeatureBuilder |
createPatternFeatureBuilder(Feature patternFeature)
Creates
nxopen.features.PatternFeatureBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX7.0.0 |
PatternGeometryBuilder |
createPatternGeometryBuilder(PatternGeometry patternGeometry)
Creates a
PatternGeometryBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX9.0.0 |
FeatureBuilder |
createPedestrianProtectionBuilder(Feature pedestrianProtection)
Deprecated.
Deprecated in NX9.0.0. Use
nxopen.features.vehicledesignCollection#createPedestrianProtectionBuilder instead.
|
PerpendicularBuilder |
createPerpendicularBuilder(Perpendicular perpendicular)
Creates a
PerpendicularBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") Created in NX6.0.0 |
PointSetBuilder |
createPointSetBuilder(PointSet pointSet)
Creates a
PointSetBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX6.0.0 |
PoleSmoothingBuilder |
createPoleSmoothingBuilder(PoleSmoothing poleSmoothing)
Creates a
PoleSmoothingBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX6.0.0 |
ProjectCurveBuilder |
createProjectCurveBuilder(Feature projectCurve)
Creates a
ProjectCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") Created in NX5.0.0 |
PromotionBuilder |
createPromotionBuilder(Promotion promotion)
Creates a
PromotionBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX6.0.0 |
PullFaceBuilder |
createPullFaceBuilder(PullFace pullFace)
Creates a
PullFaceBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") Created in NX6.0.0 |
RadialDimensionBuilder |
createRadialDimensionBuilder(RadialDimension radialDimension)
Creates a
RadialDimensionBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") Created in NX6.0.0 |
RapidSurfaceBuilder |
createRapidSurfaceBuilder(RapidSurface rapidSurface)
Creates a Rapid Surfacing feature builder
License requirements: studio_free_form ("STUDIO FREE FORM") . |
RasterImage |
createRasterImage(Point3d origin,
Matrix3x3 matrix,
double length,
double height,
String imageFileName,
double translucency,
RasterImage.MaxTextureSize maximumTextureSize)
Creates a raster image
License requirements: studio_visualize ("STUDIO VISUALIZE") . |
ReferenceMapperBuilder |
createReferenceMapperBuilder(FeatureBuilder booleanBuilderTag)
Creates a
ReferenceMapperBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX7.5.0 |
RefitFaceBuilder |
createRefitFaceBuilder(RefitFace refitFace)
Creates a RefitFaceBuilder
License requirements: solid_modeling ("SOLIDS MODELING") . |
FeatureBuilder |
createReflectionDataBuilder(Feature reflectionData)
Deprecated.
Deprecated in NX9.0.0. Use
nxopen.features.vehicledesignCollection#createReflectionDataBuilder instead.
|
RemoveParametersBuilder |
createRemoveParametersBuilder()
Creates a
RemoveParametersBuilder
License requirements: None. |
RenameLinkedPartModulePartBuilder |
createRenameLinkedPartModulePartBuilder()
Creates a
RenameLinkedPartModulePartBuilder
License requirements: None. |
ReorderBlendsBuilder |
createReorderBlendsBuilder(ReorderBlends reorderBlends)
Creates a
ReorderBlendsBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") Created in NX7.5.1 |
ReplaceBlendBuilder |
createReplaceBlendBuilder(ReplaceBlend replaceBlend)
Creates a
ReplaceBlendBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") Created in NX7.0.0 |
ReplaceFaceBuilder |
createReplaceFaceBuilder(Feature replaceFace)
Creates a replace face builder, don't use it until nx502
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") . |
ReplaceFeatureBuilder |
createReplaceFeatureBuilder()
Creates a
nxopen.features.ReplaceFeatureBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX6.0.0 |
ResizeBlendBuilder |
createResizeBlendBuilder(Feature resizeBlend)
Creates a resize blend builder, don't use it until nx502
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") . |
ResizeChamferBuilder |
createResizeChamferBuilder(ResizeChamfer resizeChamfer)
Creates a
ResizeChamferBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") Created in NX7.0.0 |
ResizeFaceBuilder |
createResizeFaceBuilder(Feature resizeFace)
Creates a resize face builder, don't use it until nx502
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") . |
ResizePlaneBuilder |
createResizePlaneBuilder(Feature resizePlane)
Creates a Resize Datum Plane feature builder
License requirements: solid_modeling ("SOLIDS MODELING") . |
RevolveBuilder |
createRevolveBuilder(Feature revolve)
Creates a Revolve builder
License requirements: solid_modeling ("SOLIDS MODELING") . |
RibbonBuilder |
createRibbonBuilder(Feature ribbon)
Creates a ribbon builder
License requirements: solid_modeling ("SOLIDS MODELING") . |
RPOBuilder |
createRpoBuilder(Feature rpo)
Creates a Relative Positioning Object builder
License requirements: solid_modeling ("SOLIDS MODELING") . |
RuledBuilder |
createRuledBuilder(Feature ruled)
Creates a Ruled Surface builder
License requirements: solid_modeling ("SOLIDS MODELING") . |
ScaleBuilder |
createScaleBuilder(Feature scale)
Creates a
ScaleBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") Created in NX5.0.0 |
FeatureBuilder |
createSeatBeltAnchorageBuilder(Feature seatBeltAnchorage)
Deprecated.
Deprecated in NX9.0.0. Use
Features.VehicleDesignCollection#createSeatBeltAnchorageBuilder instead.
|
SectionCurveBuilder |
createSectionCurveBuilder(Feature sectionCurves)
Creates a
SectionCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX5.0.0 |
SectionEditBuilder |
createSectionEditBuilder(SectionEdit sectionEdit)
Creates a
SectionEditBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX6.0.0 |
SectionInertiaAnalysisBuilder |
createSectionInertiaAnalysisBuilder(SectionInertiaAnalysis sectionInertiaAnalysis)
Creates a
SectionInertiaAnalysisBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX5.0.0 |
SectionSurfaceBuilder |
createSectionSurfaceBuilder(SectionSurface sectionSurface)
Deprecated.
Deprecated in NX9.0.0. Use
createSectionSurfaceBuilderEx(nxopen.features.SectionSurface) instead.
|
SectionSurfaceBuilderEx |
createSectionSurfaceBuilderEx(SectionSurface sectionSurfaceEx)
Creates a
SectionSurfaceBuilderEx
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX9.0.0 |
SewBuilder |
createSewBuilder(Feature sew)
Creates a Sew feature builder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") . |
ShellBuilder |
createShellBuilder(Feature shell)
Creates an Shell builder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") . |
ShellFaceBuilder |
createShellFaceBuilder(ShellFace shellFace)
Creates a
ShellFaceBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") Created in NX6.0.0 |
ShowRelatedFacesBuilder |
createShowRelatedFacesBuilder()
Creates a
ShowRelatedFacesBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") Created in NX7.0.0 |
SilhouetteFlangeBuilder |
createSilhouetteFlangeBuilder(SilhouetteFlange silhouetteFlange)
Creates a
SilhouetteFlangeBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM") Created in NX6.0.0 |
SketchFitCurveBuilder |
createSketchFitCurveBuilder(Curve fitCurve)
Creates a
SketchFitCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX8.5.0 |
SketchSplineBuilder |
createSketchSplineBuilder(Spline spline)
Creates a Studio Spline builder for sketcher
License requirements: features_modeling ("FEATURES MODELING") OR geometric_tol ("GDT"), solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
SmoothSplineBuilder |
createSmoothSplineBuilder(SmoothSpline smoothSpline)
Creates a
SmoothSplineBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") Created in NX6.0.0 |
SnipSurfaceBuilder |
createSnipSurfaceBuilder(SnipSurface snipSurface)
Creates a
SnipSurfaceBuilder
License requirements: studio_free_form ("STUDIO FREE FORM") Created in NX6.0.0 |
SphereBuilder |
createSphereBuilder(Sphere sphere)
|
SphericalCornerBuilder |
createSphericalCornerBuilder(SphericalCorner sphericalCorner)
Creates a
SphericalCornerBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") Created in NX8.5.0 |
SplitBodyBuilder |
createSplitBodyBuilder(SplitBody splitBody)
Creates a
SplitBodyBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX6.0.0 |
SplitBodyBuilder |
createSplitBodyBuilderUsingCollector(SplitBody splitBody)
Creates a
SplitBodyBuilder . |
StudioSplineBuilder |
createStudioSplineBuilder(StudioSpline splineFeature)
Deprecated.
Deprecated in NX8.0.0. Use
createStudioSplineBuilderEx(nxopen.NXObject) instead.
|
StudioSplineBuilderEx |
createStudioSplineBuilderEx(NXObject spline)
Creates a Studio Spline builder
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") . |
StudioSurfaceBuilder |
createStudioSurfaceBuilder(Feature studioSurface)
Creates a Studio Surface Builder
License requirements: solid_modeling ("SOLIDS MODELING") . |
StudioXformBuilder |
createStudioXformBuilder(StudioXform studioXform)
Deprecated.
Deprecated in NX8.5.0. Use
createStudioXformBuilderEx(nxopen.features.StudioXform) instead.
|
StudioXformBuilderEx |
createStudioXformBuilderEx(StudioXform studioXform1)
Creates a Features.StudioXformBuilderEx
License requirements: studio_free_form ("STUDIO FREE FORM") Created in NX7.0.0 |
StyledBlendBuilder |
createStyledBlendBuilder(StyledBlend styledBlend)
Creates a
StyledBlendBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM") Created in NX6.0.0 |
StyledCornerBuilder |
createStyledCornerBuilder(StyledCorner styledCorner)
Creates a
StyledCornerBuilder
License requirements: studio_free_form ("STUDIO FREE FORM") Created in NX6.0.0 |
StyledSweepBuilder |
createStyledSweepBuilder(Feature styledSweep)
Creates a
StyledSweepBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM") Created in NX6.0.0 |
FeatureCollection.CreateSubtractFeatureData |
createSubtractFeature(Body targetBody,
boolean retainTargetBody,
Body[] toolBodies,
boolean retainToolBodies,
boolean allowNonAssociativeBoolean)
Creates a subtract feature.
|
SweepAlongGuideBuilder |
createSweepAlongGuideBuilder(SweepAlongGuide sweepAlongGuide)
Creates a
SweepAlongGuideBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX6.0.0 |
SweptBuilder |
createSweptBuilder(Swept swept)
|
SymmetricBuilder |
createSymmetricBuilder(Symmetric symmetric)
Creates a
SymmetricBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") Created in NX6.0.0 |
TangentBuilder |
createTangentBuilder(Tangent tangent)
Creates a
TangentBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") Created in NX6.0.0 |
TextBuilder |
createTextBuilder(Text text)
|
ThickenBuilder |
createThickenBuilder(Feature thicken)
Creates a Thicken feature builder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") . |
ThroughCurveMeshBuilder |
createThroughCurveMeshBuilder(Feature throughCurveMesh)
Creates a
ThroughCurveMeshBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX5.0.0 |
ThroughCurvesBuilder |
createThroughCurvesBuilder(Feature throughCurves)
Creates a
ThroughCurvesBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX5.0.0 |
TrimBody2Builder |
createTrimBody2Builder(TrimBody2 trimBody2)
Creates a
TrimBody2Builder for Trim Body
feature
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX7.5.0 |
TrimBodyBuilder |
createTrimBodyBuilder(Feature trimbodyFeat)
Creates a trim body builder object.
|
TrimCurveBuilder |
createTrimCurveBuilder(Spline trimCurve)
Creates a
TrimCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") Created in NX7.5.0 |
TrimCurveBuilder |
createTrimCurveBuilder(TrimCurve trimCurve)
Creates a
TrimCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") Created in NX5.0.0 |
TrimExtendBuilder |
createTrimExtendBuilder(Feature trimExtend)
Creates a
TrimExtendBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") Created in NX5.0.0 |
TrimSheetBuilder |
createTrimsheetBuilder(Feature trimSheet)
Creates a
nxopen.features.TrimSheetBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") Created in NX5.0.0 |
TubeBuilder |
createTubeBuilder(Feature tube)
Creates a
TubeBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") Created in NX5.0.0 |
FeatureCollection.CreateUniteFeatureData |
createUniteFeature(Body targetBody,
boolean retainTargetBody,
Body[] toolBodies,
boolean retainToolBodies,
boolean allowNonAssociativeBoolean)
Creates a unite feature.
|
UnnestModuleBuilder |
createUnnestModuleBuilder()
Deprecated.
Deprecated in NX10.0.0. Please use
FeatureCollection instead.
|
UnsewBuilder |
createUnsewBuilder(Unsew unsew)
|
UntrimBuilder |
createUntrimBuilder(Feature untrim)
|
UserDefinedObjectFeatureBuilder |
createUserDefinedObjectFeatureBuilder(Feature udoFeature)
Creates a UserDefinedObjectFeature builder
License requirements: None. |
VariableOffsetBuilder |
createVariableOffsetBuilder(VariableOffset variableOffset)
Creates a
VariableOffsetBuilder
License requirements: studio_free_form ("STUDIO FREE FORM") Created in NX8.0.0 |
VarsweepBuilder |
createVarsweepBuilder(Feature varsweep)
Creates a Varsweep feature builder
License requirements: solid_modeling ("SOLIDS MODELING") . |
FeatureBuilder |
createVehicleCoordinateSystemBuilder(Feature vehicleCoordinateSystem)
Deprecated.
Deprecated in NX9.0.0. Use
Features.VehicleDesignCollection#createHoodVisibilityBuilder instead.
|
VirtualBlendEdgeBuilder |
createVirtualBlendEdgeBuilder()
Creates a
VirtualBlendEdgeBuilder
License requirements: None. |
VirtualCurveBuilder |
createVirtualCurveBuilder(VirtualCurve virtualCurve)
Creates a
VirtualCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX7.5.0 |
FeatureBuilder |
createVisionPlaneBuilder(Feature visionPlane)
Deprecated.
Deprecated in NX9.0.0. Use
nxopen.features.vehicledesignCollection#createVisionPlaneBuilder instead.
|
WaveDatumBuilder |
createWaveDatumBuilder(Feature wavedatum)
Creates a Wavedatum Builder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") . |
WavePointBuilder |
createWavePointBuilder(Feature wavepoint)
Creates a
WavePointBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") Created in NX5.0.0 |
WaveRoutingBuilder |
createWaveRoutingBuilder(Feature waverouting)
Creates a
WaveRoutingBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX5.0.0 |
WaveSketchBuilder |
createWaveSketchBuilder(Feature wavesketch)
Creates a Wavesketch Builder
License requirements: solid_modeling ("SOLIDS MODELING") . |
FeatureBuilder |
createWindshieldDatumBuilder(Feature windshieldDatum)
Deprecated.
Deprecated in NX9.0.0. Use
nxopen.features.vehicledesignCollection#createWindshieldDatumBuilder instead.
|
WrapBuilder |
createWrapBuilder(WrapUnwrap wrap)
|
WrapGeometryBuilder |
createWrapGeometryBuilder(WrapGeometry wrapGeometry)
Creates a
WrapGeometryBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") Created in NX6.0.0 |
CurveFeatureCollection |
curveFeatureCollection()
Returns the CurveFeatureCollection instance belonging to this part .
|
void |
deleteAllPartInformationalFeatureAlerts()
Delete all informational alerts from all the features in a given part
License requirements: None. |
void |
deleteInformationalAlerts(NXObject[] feature)
Delete all informational alerts from the features and if numFrecs is 0 then delete informational alerts from all fetaures in the part
License requirements: None. |
void |
deleteWarningAlerts(NXObject[] feature)
Delete all warning alerts from the features and if numFrecs is 0 then delete warning alerts from all fetaures in the part
License requirements: None. |
DesignFeatureCollection |
designFeatureCollection()
Returns the DesignfeatureCollection instance belonging to this part .
|
DieCollection |
dies()
Returns the DieCollection instance belonging to this part .
|
Feature |
findObject(String journalIdentifier)
Finds the
nxopen.features with the given identifier as recorded in a journal. |
FreeformCurveCollection |
freeformCurveCollection()
Returns the FreeformCurveCollection instance belonging to this part .
|
FreeformSurfaceCollection |
freeformSurfaceCollection()
Returns the FreeformSurfaceCollection instance belonging to this part .
|
GeodesicSketchCollection |
geodesicSketchCollection()
Returns the GeodesicSketchCollection instance belonging to this part .
|
Feature[] |
getAllPartFeaturesWithAlerts()
Returns a list of all features from a given part that have update alerts
License requirements: None. |
Feature |
getAssociatedFeature(NXObject object)
Get the feature associated with an object
License requirements: None. |
Feature[] |
getAssociatedFeaturesOfBody(Body body)
Returns all features that are associated with this body
License requirements: solid_modeling ("SOLIDS MODELING") . |
Feature[] |
getAssociatedFeaturesOfEdge(Edge edge)
Returns all features that are associated with the faces of this edge
License requirements: solid_modeling ("SOLIDS MODELING") . |
Feature[] |
getAssociatedFeaturesOfFace(Face face)
Returns all features associated with this face
License requirements: solid_modeling ("SOLIDS MODELING") . |
Feature[] |
getFeatures()
Returns all the features in the part
License requirements: None. |
boolean |
getIsMasterCutVisibleInView(Feature masterCut,
CutView view)
Returns if a
MasterCutBuilder is visbible in specified CutView . |
Feature |
getParentFeatureOfBody(Body body)
Returns the feature that created this body.
|
Feature |
getParentFeatureOfFace(Face face)
Returns the feature that created this face
License requirements: solid_modeling ("SOLIDS MODELING") . |
Feature[] |
getParentFeaturesOfEdge(Edge edge)
Returns the features that created the faces of this edge.
|
Feature[] |
getPartFeaturesWithNewAlerts()
Returns a list of features that generated update alerts during recent update
License requirements: None. |
void |
reorderFeature(Feature[] features,
Feature target,
FeatureCollection.ReorderType beforeOrAfter)
Reorders the Feature with respect to the given feature
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
reorganizeFeature(Feature[] features,
Feature target,
FeatureCollection.ReorderType beforeOrAfter)
Reorganizes the Feature with respect to the given feature across the part module
License requirements: solid_modeling ("SOLIDS MODELING") . |
SketchConversionReport |
replaceWithIndependentSketch(Feature[] features)
Replace the given features with Independent Sketch
License requirements: None. |
void |
setCanResetMcf(boolean canResetMcf)
Sets whether mcf is allowed
License requirements: None. |
void |
setEditWithRollbackFeature(Feature feature)
Sets the feature being edited with rollback
License requirements: None. |
SheetmetalManager |
sheetmetalManager()
Returns the Straight Brake Sheetmetal Manager for this part .
|
ShipCollection |
shipCollection()
Returns the ShipCollection instance belonging to this part .
|
void |
suppressFeatures(Feature[] features)
Suppress the given features
License requirements: solid_modeling ("SOLIDS MODELING") . |
SweepFeatureCollection |
sweepFeatureCollection()
Returns the Sweep-like features collection belonging to this part .
|
SynchronousCurveCollection |
synchronousCurveCollection()
Returns the SynchronousCurveCollection instance belonging to this part .
|
SynchronousEdgeCollection |
synchronousEdgeCollection()
Returns the SynchronousEdgeCollection instance belonging to this part .
|
ToolingCollection |
toolingCollection()
Returns the ToolingCollection instance belonging to this part .
|
ToolingFeatureCollection |
toolingFeatureCollection()
Returns the ToolingFeatureCollection instance belonging to this part .
|
TrimFeatureCollection |
trimFeatureCollection()
Returns the TrimfeatureCollection instance belonging to this part .
|
Feature[] |
unsuppressFeatures(Feature[] features)
Unsuppress the given features
License requirements: solid_modeling ("SOLIDS MODELING") . |
VehicleDesignCollection |
vehicleDesignCollection()
Returns the VehicleDesignCollection instance belonging to this part .
|
WeldManager |
weldManager()
Returns the WeldManager for this part .
|
_find_next, iterator
SheetmetalManager sheetmetalManager() throws RemoteException
RemoteException
AeroSheetmetalManager aeroSheetmetalManager() throws RemoteException
RemoteException
DieCollection dies() throws RemoteException
RemoteException
WeldManager weldManager() throws RemoteException
RemoteException
AutomotiveCollection automotiveCollection() throws RemoteException
RemoteException
ShipCollection shipCollection() throws RemoteException
RemoteException
ToolingCollection toolingCollection() throws RemoteException
RemoteException
SynchronousEdgeCollection synchronousEdgeCollection() throws RemoteException
RemoteException
SweepFeatureCollection sweepFeatureCollection() throws RemoteException
RemoteException
SynchronousCurveCollection synchronousCurveCollection() throws RemoteException
RemoteException
VehicleDesignCollection vehicleDesignCollection() throws RemoteException
RemoteException
DesignFeatureCollection designFeatureCollection() throws RemoteException
RemoteException
FreeformCurveCollection freeformCurveCollection() throws RemoteException
RemoteException
FreeformSurfaceCollection freeformSurfaceCollection() throws RemoteException
RemoteException
TrimFeatureCollection trimFeatureCollection() throws RemoteException
RemoteException
ToolingFeatureCollection toolingFeatureCollection() throws RemoteException
RemoteException
AeroCollection aeroCollection() throws RemoteException
RemoteException
CurveFeatureCollection curveFeatureCollection() throws RemoteException
RemoteException
GeodesicSketchCollection geodesicSketchCollection() throws RemoteException
RemoteException
MeshSurfaceBuilder createMeshSurfaceBuilder(Feature meshSurf) throws NXException, RemoteException
meshSurf
- Ruled
,
ThroughCurves
,
ThroughCurveMesh
to be editedNXException
RemoteException
BlockFeatureBuilder createBlockFeatureBuilder(Feature block) throws NXException, RemoteException
block
- Block
to be editedNXException
RemoteException
CopyPasteBuilder createCopyPasteBuilder(NXObject[] features) throws NXException, RemoteException
CopyPasteBuilder
features
- Features to be copy/pasteNXException
RemoteException
ReferenceMapperBuilder createReferenceMapperBuilder(FeatureBuilder booleanBuilderTag) throws NXException, RemoteException
ReferenceMapperBuilder
booleanBuilderTag
- nxopen.features.FeatureBuilder
NXException
RemoteException
ExtrudeBuilder createExtrudeBuilder(Feature extrude) throws NXException, RemoteException
extrude
- Extrude
to be editedNXException
RemoteException
UserDefinedObjectFeatureBuilder createUserDefinedObjectFeatureBuilder(Feature udoFeature) throws NXException, RemoteException
udoFeature
- nxopen.features.UserDefinedObjectFeature
to be edited - may be null if creating a new feature.NXException
RemoteException
RevolveBuilder createRevolveBuilder(Feature revolve) throws NXException, RemoteException
revolve
- RevolveBuilder
to be edited, if null then create a new oneNXException
RemoteException
EmbossBuilder createEmbossBuilder(Feature emboss) throws NXException, RemoteException
emboss
- EmbossBuilder
to be editedNXException
RemoteException
OffsetEmbossBuilder createOffsetEmbossBuilder(Feature offsetEmboss) throws NXException, RemoteException
offsetEmboss
- OffsetEmbossBuilder
to be editedNXException
RemoteException
DividefaceBuilder createDividefaceBuilder(Feature divideface) throws NXException, RemoteException
divideface
- DividefaceBuilder
to be editedNXException
RemoteException
OvercrownBuilder createOvercrownFeatureBuilder(Feature overcrown) throws NXException, RemoteException
overcrown
- OvercrownBuilder
to be edited, if null then create a new one.NXException
RemoteException
CurveLengthBuilder createCurvelengthBuilder(Feature curvelength) throws NXException, RemoteException
curvelength
- CurveLengthBuilder
to be edited, if null then create a new oneNXException
RemoteException
DatumAxisBuilder createDatumAxisBuilder(Feature datumAxis) throws NXException, RemoteException
datumAxis
- nxopen.features.DatumAxisFeature
to be editedNXException
RemoteException
DatumPlaneBuilder createDatumPlaneBuilder(Feature dplane) throws NXException, RemoteException
dplane
- nxopen.features.DatumPlaneFeature
to be editedNXException
RemoteException
ResizePlaneBuilder createResizePlaneBuilder(Feature resizePlane) throws NXException, RemoteException
resizePlane
- nxopen.features.DatumPlaneFeature
to be editedNXException
RemoteException
HoleFeatureBuilder createHoleFeatureBuilder(Feature hole) throws NXException, RemoteException
hole
- Hole
to be editedNXException
RemoteException
RPOBuilder createRpoBuilder(Feature rpo) throws NXException, RemoteException
rpo
- nxopen.features.Feature
to be repositionedNXException
RemoteException
ChamferBuilder createChamferBuilder(Feature chamfer) throws NXException, RemoteException
chamfer
- Chamfer
to be edited, if null then create a new oneNXException
RemoteException
EdgeBlendBuilder createEdgeBlendBuilder(Feature edgeblend) throws NXException, RemoteException
edgeblend
- EdgeBlendBuilder
to be edited, if null then create a new oneNXException
RemoteException
FeatureCollection.CreateUniteFeatureData createUniteFeature(Body targetBody, boolean retainTargetBody, Body[] toolBodies, boolean retainToolBodies, boolean allowNonAssociativeBoolean) throws NXException, RemoteException
targetBody
- Target bodyretainTargetBody
- Retain option for target bodytoolBodies
- Tool bodiesretainToolBodies
- Retain option for tool bodiesallowNonAssociativeBoolean
- Allow boolean operation even if it results into non-associative booleanNXException
RemoteException
FeatureCollection.CreateSubtractFeatureData createSubtractFeature(Body targetBody, boolean retainTargetBody, Body[] toolBodies, boolean retainToolBodies, boolean allowNonAssociativeBoolean) throws NXException, RemoteException
targetBody
- Target bodyretainTargetBody
- Retain option for target bodytoolBodies
- Tool bodiesretainToolBodies
- Retain option for tool bodiesallowNonAssociativeBoolean
- Allow boolean operation even if it results into non-associative booleanNXException
RemoteException
FeatureCollection.CreateIntersectFeatureData createIntersectFeature(Body targetBody, boolean retainTargetBody, Body[] toolBodies, boolean retainToolBodies, boolean allowNonAssociativeBoolean) throws NXException, RemoteException
targetBody
- Target bodyretainTargetBody
- Retain option for target bodytoolBodies
- Tool bodiesretainToolBodies
- Retain option for tool bodiesallowNonAssociativeBoolean
- Allow boolean operation even if it results into non-associative booleanNXException
RemoteException
VarsweepBuilder createVarsweepBuilder(Feature varsweep) throws NXException, RemoteException
varsweep
- Varsweep to be editedNXException
RemoteException
FaceBlendBuilder createFaceBlendBuilder(Feature faceBlend) throws NXException, RemoteException
faceBlend
- FaceBlendBuilder
to be editedNXException
RemoteException
Feature[] getFeatures() throws NXException, RemoteException
NXException
RemoteException
Feature findObject(String journalIdentifier) throws NXException, RemoteException
nxopen.features
with the given identifier as recorded in a journal.
An object may not return the same value as its JournalIdentifier in different versions of
the software. However newer versions of the software should find the same object when
FindObject is passed older versions of its journal identifier. In general, this method
should not be used in handwritten code and exists to support record and playback of journals.
An exception will be thrown if no object can be found with the given journal identifier.
journalIdentifier
- Identifier of the body you wantNXException
RemoteException
void suppressFeatures(Feature[] features) throws NXException, RemoteException
features
- Features to be suppressedNXException
RemoteException
Feature[] unsuppressFeatures(Feature[] features) throws NXException, RemoteException
features
- Features to be unsuppressedNXException
RemoteException
Feature getAssociatedFeature(NXObject object) throws NXException, RemoteException
object
- Object to find associated feature.NXException
RemoteException
HumanBuilder createHumanBuilder(Feature human) throws NXException, RemoteException
human
- Human
to be edited, if null then create a new oneNXException
RemoteException
HumanPosturePredictionBuilder createHumanPosturePredictionBuilder(HumanPosturePrediction posturePrediction) throws NXException, RemoteException
posturePrediction
- HumanPosturePrediction
to be edited,
if null then create a new oneHumanPosturePredictionBuilder
objectNXException
RemoteException
OffsetSurfaceBuilder createOffsetSurfaceBuilder(Feature offsetSurface) throws NXException, RemoteException
offsetSurface
- nxopen.features.Feature
to be editedNXException
RemoteException
RibbonBuilder createRibbonBuilder(Feature ribbon) throws NXException, RemoteException
ribbon
- nxopen.features.Feature
to be editedNXException
RemoteException
PatchBuilder createPatchBuilder(Feature patch) throws NXException, RemoteException
patch
- Patch Features to be editedNXException
RemoteException
BooleanBuilder createBooleanBuilder(BooleanFeature booleanFeature) throws NXException, RemoteException
booleanFeature
- nxopen.features.BooleanFeature
to be editedNXException
RemoteException
BooleanBuilder createBooleanBuilderUsingCollector(BooleanFeature booleanFeature) throws NXException, RemoteException
booleanFeature
- nxopen.features.BooleanFeature
to be editedNXException
RemoteException
TrimBodyBuilder createTrimBodyBuilder(Feature trimbodyFeat) throws NXException, RemoteException
createTrimBody2Builder(nxopen.features.TrimBody2)
and
TrimBody2
to create and edit trim body features.
trimbodyFeat
- TrimBody
to be editedNXException
RemoteException
ShellBuilder createShellBuilder(Feature shell) throws NXException, RemoteException
shell
- ShellBuilder
to be editedNXException
RemoteException
DatumCsysBuilder createDatumCsysBuilder(Feature datumCsys) throws NXException, RemoteException
datumCsys
- DatumCsysBuilder
to be editedNXException
RemoteException
DraftBuilder createDraftBuilder(Feature draft) throws NXException, RemoteException
draft
- DraftBuilder
to be edited, if null then create a new oneNXException
RemoteException
RasterImage createRasterImage(Point3d origin, Matrix3x3 matrix, double length, double height, String imageFileName, double translucency, RasterImage.MaxTextureSize maximumTextureSize) throws NXException, RemoteException
origin
- The origin for the raster imagematrix
- The rotation matrix for the raster imagelength
- Length of the image, given in the units parameterheight
- Height of the image, give in the units parameterimageFileName
- Name of the image file to use.
For now, it must be a .tif file translucency
- 0.0 for no translucency, 1.0 for fully tranparentmaximumTextureSize
- NXException
RemoteException
MasterCutBuilder createMasterCutBuilder(Feature masterCut) throws NXException, RemoteException
masterCut
- MasterCutBuilder
to be edited,
if null then create a new oneNXException
RemoteException
AOCSBuilder createAocsBuilder(Feature aocs) throws NXException, RemoteException
aocs
- AOCSBuilder
to be editedNXException
RemoteException
OffsetFaceBuilder createOffsetFaceBuilder(Feature offsetface) throws NXException, RemoteException
OffsetFaceBuilder
offsetface
- OffsetFace
to be edited, if null then create a new oneNXException
RemoteException
TubeBuilder createTubeBuilder(Feature tube) throws NXException, RemoteException
TubeBuilder
tube
- TubeBuilder
to be editedNXException
RemoteException
MirrorFeatureBuilder createMirrorFeatureBuilder(Feature mirrorFea) throws NXException, RemoteException
nxopen.features.MirrorFeatureBuilder
mirrorFea
- nxopen.features.MirrorFeatureBuilder
to be editedNXException
RemoteException
MirrorBuilder createMirrorBuilder(Mirror mirrorFeature) throws NXException, RemoteException
mirrorFeature
- Mirror
to be editedMirrorBuilder
objectNXException
RemoteException
ScaleBuilder createScaleBuilder(Feature scale) throws NXException, RemoteException
ScaleBuilder
scale
- Scale
to be editedNXException
RemoteException
SewBuilder createSewBuilder(Feature sew) throws NXException, RemoteException
sew
- SewBuilder
to be editedNXException
RemoteException
SectionCurveBuilder createSectionCurveBuilder(Feature sectionCurves) throws NXException, RemoteException
SectionCurveBuilder
sectionCurves
- SectionCurve
to be editedNXException
RemoteException
IntersectionCurveBuilder createIntersectionCurveBuilder(Feature intersectionCurve) throws NXException, RemoteException
IntersectionCurveBuilder
intersectionCurve
- IntersectionCurveBuilder
to be editedNXException
RemoteException
ThickenBuilder createThickenBuilder(Feature thicken) throws NXException, RemoteException
thicken
- Thicken
to be editedNXException
RemoteException
TrimExtendBuilder createTrimExtendBuilder(Feature trimExtend) throws NXException, RemoteException
TrimExtendBuilder
trimExtend
- TrimExtend
to be editedNXException
RemoteException
GeomcopyBuilder createGeomcopyBuilder(Feature geomcopy) throws NXException, RemoteException
GeomcopyBuilder
geomcopy
- Geomcopy
to be editedNXException
RemoteException
ProjectCurveBuilder createProjectCurveBuilder(Feature projectCurve) throws NXException, RemoteException
ProjectCurveBuilder
projectCurve
- ProjectCurve
to be editedNXException
RemoteException
ExtractFaceBuilder createExtractFaceBuilder(Feature copyFace) throws NXException, RemoteException
ExtractFaceBuilder
copyFace
- CopyFace Feature to be editedNXException
RemoteException
JoinCurvesBuilder createJoinCurvesBuilder(Feature joinCurves) throws NXException, RemoteException
JoinCurvesBuilder
joinCurves
- JoinCurves
to be edited, if null then create a new oneNXException
RemoteException
StudioSplineBuilder createStudioSplineBuilder(StudioSpline splineFeature) throws NXException, RemoteException
createStudioSplineBuilderEx(nxopen.NXObject)
instead.
splineFeature
- StudioSpline
to be editedNXException
RemoteException
CurveOnSurfaceBuilder createCurveOnSurfaceBuilder(CurveOnSurface cosFeature) throws NXException, RemoteException
cosFeature
- CurveOnSurface
to be editedNXException
RemoteException
UntrimBuilder createUntrimBuilder(Feature untrim) throws NXException, RemoteException
untrim
- Untrim
to be editedNXException
RemoteException
WaveDatumBuilder createWaveDatumBuilder(Feature wavedatum) throws NXException, RemoteException
wavedatum
- Wavedatum Features to be editedNXException
RemoteException
WaveSketchBuilder createWaveSketchBuilder(Feature wavesketch) throws NXException, RemoteException
wavesketch
- Wavesketch Features to be editedNXException
RemoteException
WaveRoutingBuilder createWaveRoutingBuilder(Feature waverouting) throws NXException, RemoteException
WaveRoutingBuilder
waverouting
- Waverouting Features to be editedNXException
RemoteException
WavePointBuilder createWavePointBuilder(Feature wavepoint) throws NXException, RemoteException
WavePointBuilder
wavepoint
- Wavepoint Features to be editedNXException
RemoteException
TrimSheetBuilder createTrimsheetBuilder(Feature trimSheet) throws NXException, RemoteException
nxopen.features.TrimSheetBuilder
trimSheet
- nxopen.features.TrimSheet
to be edited,
if null then create a new oneNXException
RemoteException
CircularBlendCurveBuilder createCircularBlendCurveBuilder(CircularBlendCurve circularBlendCurve) throws NXException, RemoteException
CircularBlendCurveBuilder
circularBlendCurve
- CircularBlendCurve
to be edited,
, if null then create a new oneNXException
RemoteException
RapidSurfaceBuilder createRapidSurfaceBuilder(RapidSurface rapidSurface) throws NXException, RemoteException
rapidSurface
- RapidSurface
to be editedNXException
RemoteException
UnsewBuilder createUnsewBuilder(Unsew unsew) throws NXException, RemoteException
unsew
- Unsew
to be editedNXException
RemoteException
MirrorBodyBuilder createMirrorBodyBuilder(Feature mirrorBody) throws NXException, RemoteException
MirrorBodyBuilder
mirrorBody
- MirrorBodyBuilder
to be editedNXException
RemoteException
DraftBodyBuilder createDraftBodyBuilder(Feature draftBody) throws NXException, RemoteException
DraftBodyBuilder
draftBody
- DraftBody
to be editedNXException
RemoteException
Feature[] getPartFeaturesWithNewAlerts() throws NXException, RemoteException
NXException
RemoteException
Feature[] getAllPartFeaturesWithAlerts() throws NXException, RemoteException
NXException
RemoteException
GlobalShapingBuilder createGlobalShapingBuilder(GlobalShaping globalShaping) throws NXException, RemoteException
GlobalShapingBuilder
globalShaping
- GlobalShaping
to be editedNXException
RemoteException
TrimCurveBuilder createTrimCurveBuilder(TrimCurve trimCurve) throws NXException, RemoteException
TrimCurveBuilder
trimCurve
- TrimCurve
to be editedNXException
RemoteException
TrimCurveBuilder createTrimCurveBuilder(Spline trimCurve) throws NXException, RemoteException
TrimCurveBuilder
trimCurve
- The trimmed curve to be editedNXException
RemoteException
OffsetCurveBuilder createOffsetCurveBuilder(Feature offsetCurve) throws NXException, RemoteException
OffsetCurveBuilder
offsetCurve
- OffsetCurve
to be editedNXException
RemoteException
void deleteAllPartInformationalFeatureAlerts() throws NXException, RemoteException
NXException
RemoteException
ThroughCurveMeshBuilder createThroughCurveMeshBuilder(Feature throughCurveMesh) throws NXException, RemoteException
ThroughCurveMeshBuilder
throughCurveMesh
- ThroughCurveMesh
to be edited, if null then create a new oneNXException
RemoteException
BridgeCurveBuilder createBridgeCurveBuilder(Feature bridgeCurve) throws NXException, RemoteException
createBridgeCurveBuilderEx(nxopen.features.BridgeCurve)
instead.
BridgeCurveBuilder
bridgeCurve
- BridgeCurve
to be edited
NXException
RemoteException
SweptBuilder createSweptBuilder(Swept swept) throws NXException, RemoteException
swept
- Swept
to be editedNXException
RemoteException
CylinderBuilder createCylinderBuilder(Feature cylinder) throws NXException, RemoteException
CylinderBuilder
cylinder
- Cylinder
to be editedNXException
RemoteException
CompositeCurveBuilder createCompositeCurveBuilder(Feature compositeCurve) throws NXException, RemoteException
CompositeCurveBuilder
compositeCurve
- nxopen.features.Feature
to be editedNXException
RemoteException
ThroughCurvesBuilder createThroughCurvesBuilder(Feature throughCurves) throws NXException, RemoteException
ThroughCurvesBuilder
throughCurves
- ThroughCurves
to be edited, if null then create a new oneNXException
RemoteException
StudioSurfaceBuilder createStudioSurfaceBuilder(Feature studioSurface) throws NXException, RemoteException
studioSurface
- StudioSurface
to be editedNXException
RemoteException
SectionInertiaAnalysisBuilder createSectionInertiaAnalysisBuilder(SectionInertiaAnalysis sectionInertiaAnalysis) throws NXException, RemoteException
SectionInertiaAnalysisBuilder
sectionInertiaAnalysis
- SectionInertiaAnalysis
to be editedNXException
RemoteException
boolean getIsMasterCutVisibleInView(Feature masterCut, CutView view) throws NXException, RemoteException
MasterCutBuilder
is visbible in specified CutView
.
masterCut
- MasterCutBuilder
to be testedview
- Cut viewNXException
RemoteException
DeleteFaceBuilder createDeleteFaceBuilder(Feature deleteFace) throws NXException, RemoteException
deleteFace
- nxopen.features.Feature
to be editedNXException
RemoteException
ResizeBlendBuilder createResizeBlendBuilder(Feature resizeBlend) throws NXException, RemoteException
resizeBlend
- nxopen.features.Feature
to be editedNXException
RemoteException
PatchOpeningsBuilder createPatchOpeningsBuilder(Feature patchOpenings) throws NXException, RemoteException
patchOpenings
- nxopen.features.Feature
to be editedNXException
RemoteException
MoveFaceBuilder createMoveFaceBuilder(Feature moveFace) throws NXException, RemoteException
moveFace
- nxopen.features.Feature
to be editedNXException
RemoteException
OffsetRegionBuilder createOffsetRegionBuilder(Feature offsetRegion) throws NXException, RemoteException
offsetRegion
- nxopen.features.Feature
to be editedNXException
RemoteException
PatternFaceBuilder createPatternFaceBuilder(Feature patternFace) throws NXException, RemoteException
patternFace
- nxopen.features.Feature
to be editedNXException
RemoteException
ResizeFaceBuilder createResizeFaceBuilder(Feature resizeFace) throws NXException, RemoteException
resizeFace
- nxopen.features.Feature
to be editedNXException
RemoteException
ReplaceFaceBuilder createReplaceFaceBuilder(Feature replaceFace) throws NXException, RemoteException
replaceFace
- nxopen.features.Feature
to be editedNXException
RemoteException
RuledBuilder createRuledBuilder(Feature ruled) throws NXException, RemoteException
ruled
- nxopen.features.Feature
to be editedNXException
RemoteException
NSidedSurfaceBuilder createNSidedSurfaceBuilder(NSidedSurface nsidedSurface) throws NXException, RemoteException
NSidedSurfaceBuilder
nsidedSurface
- NSidedSurface
to be editedNXException
RemoteException
SectionSurfaceBuilder createSectionSurfaceBuilder(SectionSurface sectionSurface) throws NXException, RemoteException
createSectionSurfaceBuilderEx(nxopen.features.SectionSurface)
instead.
sectionSurface
- SectionSurface
to be edited
NXException
RemoteException
CoplanarBuilder createCoplanarBuilder(Feature coplanar) throws NXException, RemoteException
coplanar
- nxopen.features.Feature
to be editedNXException
RemoteException
SnipSurfaceBuilder createSnipSurfaceBuilder(SnipSurface snipSurface) throws NXException, RemoteException
SnipSurfaceBuilder
snipSurface
- SnipSurface
to be editedNXException
RemoteException
LinearDimensionBuilder createLinearDimensionBuilder(LinearDimension linearDimension) throws NXException, RemoteException
LinearDimensionBuilder
linearDimension
- LinearDimension
to be editedNXException
RemoteException
EnlargeBuilder createEnlargeBuilder(Enlarge enlargeFeature) throws NXException, RemoteException
enlargeFeature
- Enlarge
to be editedNXException
RemoteException
LawExtensionBuilder createLawExtensionBuilder(LawExtension lawExtension) throws NXException, RemoteException
LawExtensionBuilder
lawExtension
- LawExtension
to be editedNXException
RemoteException
LawExtensionBuilderEx createLawExtensionBuilderEx(Feature lawExtension) throws NXException, RemoteException
LawExtensionBuilderEx
lawExtension
- LawExtensionEx
to be editedNXException
RemoteException
GuidedExtensionBuilderEx createGuidedExtensionBuilderEx(Feature guidedExtension) throws NXException, RemoteException
GuidedExtensionBuilderEx
guidedExtension
- GuidedExtensionEx
to be editedNXException
RemoteException
FreeTransformerBuilder createFreeTransformerBuilder(Feature freeTransformer) throws NXException, RemoteException
FreeTransformerBuilder
freeTransformer
- FreeTransformer
to be editedNXException
RemoteException
MeshTransformerBuilder createMeshTransformerBuilder(Feature meshTransformer) throws NXException, RemoteException
MeshTransformerBuilder
meshTransformer
- MeshTransformer
to be editedNXException
RemoteException
CombinedProjectionBuilder createCombinedProjectionBuilder(CombinedProjection combinedProjection) throws NXException, RemoteException
CombinedProjectionBuilder
combinedProjection
- CombinedProjection
to be editedNXException
RemoteException
StyledSweepBuilder createStyledSweepBuilder(Feature styledSweep) throws NXException, RemoteException
StyledSweepBuilder
styledSweep
- StyledSweep
to be editedNXException
RemoteException
CutFaceBuilder createCutFaceBuilder(Feature cutFace) throws NXException, RemoteException
cutFace
- nxopen.features.Feature
to be editedNXException
RemoteException
ConeBuilder createConeBuilder(Cone cone) throws NXException, RemoteException
cone
- Cone
to be editedNXException
RemoteException
SphereBuilder createSphereBuilder(Sphere sphere) throws NXException, RemoteException
sphere
- Sphere
to be editedNXException
RemoteException
CopyFaceBuilder createCopyFaceBuilder(Feature copyFace) throws NXException, RemoteException
copyFace
- nxopen.features.Feature
to be editedNXException
RemoteException
PasteFaceBuilder createPasteFaceBuilder(Feature pasteFace) throws NXException, RemoteException
pasteFace
- nxopen.features.Feature
to be editedNXException
RemoteException
PoleSmoothingBuilder createPoleSmoothingBuilder(PoleSmoothing poleSmoothing) throws NXException, RemoteException
PoleSmoothingBuilder
poleSmoothing
- PoleSmoothing
to be editedNXException
RemoteException
AdmMoveFaceBuilder createAdmMoveFaceBuilder(AdmMoveFace admMoveFace) throws NXException, RemoteException
AdmMoveFaceBuilder
admMoveFace
- AdmMoveFace
to be editedNXException
RemoteException
WrapGeometryBuilder createWrapGeometryBuilder(WrapGeometry wrapGeometry) throws NXException, RemoteException
WrapGeometryBuilder
wrapGeometry
- WrapGeometry
to be editedNXException
RemoteException
GroupFaceBuilder createGroupFaceBuilder(GroupFace groupFace) throws NXException, RemoteException
GroupFaceBuilder
groupFace
- GroupFace
to be editedNXException
RemoteException
ColorFaceBuilder createColorFaceBuilder() throws NXException, RemoteException
NXException
RemoteException
FeatureBuilder createSeatBeltAnchorageBuilder(Feature seatBeltAnchorage) throws NXException, RemoteException
Features.VehicleDesignCollection#createSeatBeltAnchorageBuilder
instead.
SeatBeltAnchorageBuilder
seatBeltAnchorage
- Feature to be edited
NXException
RemoteException
BoundedPlaneBuilder createBoundedPlaneBuilder(BoundedPlane boundedPlane) throws NXException, RemoteException
BoundedPlaneBuilder
boundedPlane
- BoundedPlane
to be editedNXException
RemoteException
AssemblyCutBuilder createAssemblyCutBuilder(AssemblyCut assemblyCut) throws NXException, RemoteException
AssemblyCutBuilder
assemblyCut
- AssemblyCut
to be editedNXException
RemoteException
FeatureBuilder createReflectionDataBuilder(Feature reflectionData) throws NXException, RemoteException
nxopen.features.vehicledesignCollection#createReflectionDataBuilder
instead.
ReflectionDataBuilder
reflectionData
- Feature to be edited
NXException
RemoteException
WrapBuilder createWrapBuilder(WrapUnwrap wrap) throws NXException, RemoteException
wrap
- WrapUnwrap
to be editedNXException
RemoteException
RemoveParametersBuilder createRemoveParametersBuilder() throws NXException, RemoteException
NXException
RemoteException
MatchEdgeBuilder createMatchEdgeBuilder(MatchEdge matchEdge) throws NXException, RemoteException
MatchEdgeBuilder
matchEdge
- MatchEdge
to be editedNXException
RemoteException
RadialDimensionBuilder createRadialDimensionBuilder(RadialDimension radialDimension) throws NXException, RemoteException
RadialDimensionBuilder
radialDimension
- RadialDimension
to be editedNXException
RemoteException
StyledBlendBuilder createStyledBlendBuilder(StyledBlend styledBlend) throws NXException, RemoteException
StyledBlendBuilder
styledBlend
- StyledBlend
to be editedNXException
RemoteException
HolePackageBuilder createHolePackageBuilder(HolePackage holePackage) throws NXException, RemoteException
HolePackageBuilder
holePackage
- HolePackage
to be editedNXException
RemoteException
StudioXformBuilder createStudioXformBuilder(StudioXform studioXform) throws NXException, RemoteException
createStudioXformBuilderEx(nxopen.features.StudioXform)
instead.
studioXform
- StudioXform
to be edited
NXException
RemoteException
StudioXformBuilderEx createStudioXformBuilderEx(StudioXform studioXform1) throws NXException, RemoteException
studioXform1
- StudioXform
to be editedNXException
RemoteException
SweepAlongGuideBuilder createSweepAlongGuideBuilder(SweepAlongGuide sweepAlongGuide) throws NXException, RemoteException
SweepAlongGuideBuilder
sweepAlongGuide
- SweepAlongGuide
to be editedNXException
RemoteException
ParallelBuilder createParallelBuilder(Parallel parallel) throws NXException, RemoteException
ParallelBuilder
parallel
- Parallel
to be editedNXException
RemoteException
CoaxialBuilder createCoaxialBuilder(Coaxial coaxial) throws NXException, RemoteException
CoaxialBuilder
coaxial
- Coaxial
to be editedNXException
RemoteException
PerpendicularBuilder createPerpendicularBuilder(Perpendicular perpendicular) throws NXException, RemoteException
PerpendicularBuilder
perpendicular
- Perpendicular
to be editedNXException
RemoteException
TangentBuilder createTangentBuilder(Tangent tangent) throws NXException, RemoteException
TangentBuilder
tangent
- Tangent
to be editedNXException
RemoteException
AdmResizeFaceBuilder createAdmResizeFaceBuilder(AdmResizeFace admResizeFace) throws NXException, RemoteException
AdmResizeFaceBuilder
admResizeFace
- AdmResizeFace
to be editedNXException
RemoteException
StyledCornerBuilder createStyledCornerBuilder(StyledCorner styledCorner) throws NXException, RemoteException
StyledCornerBuilder
styledCorner
- StyledCorner
to be editedNXException
RemoteException
AdmOffsetRegionBuilder createAdmOffsetRegionBuilder(AdmOffsetRegion offsetRegion) throws NXException, RemoteException
AdmOffsetRegionBuilder
offsetRegion
- AdmOffsetRegion
to be editedNXException
RemoteException
MirrorFaceBuilder createMirrorFaceBuilder(Feature mirrorFace) throws NXException, RemoteException
mirrorFace
- nxopen.features.Feature
to be editedNXException
RemoteException
PointSetBuilder createPointSetBuilder(PointSet pointSet) throws NXException, RemoteException
PointSetBuilder
pointSet
- PointSet
to be editedNXException
RemoteException
FeatureBuilder createWindshieldDatumBuilder(Feature windshieldDatum) throws NXException, RemoteException
nxopen.features.vehicledesignCollection#createWindshieldDatumBuilder
instead.
WindshieldDatumBuilder
windshieldDatum
- feature to be edited
NXException
RemoteException
FeatureBuilder createVisionPlaneBuilder(Feature visionPlane) throws NXException, RemoteException
nxopen.features.vehicledesignCollection#createVisionPlaneBuilder
instead.
VisionPlaneBuilder
visionPlane
- feature to be edited
NXException
RemoteException
FeatureBuilder createHoodVisibilityBuilder(Feature hoodVisibility) throws NXException, RemoteException
nxopen.features.vehicledesignCollection#createHoodVisibilityBuilder
instead.
HoodVisibilityBuilder
hoodVisibility
- feature to be edited
NXException
RemoteException
FeatureBuilder createPedestrianProtectionBuilder(Feature pedestrianProtection) throws NXException, RemoteException
nxopen.features.vehicledesignCollection#createPedestrianProtectionBuilder
instead.
PedestrianProtectionBuilder
pedestrianProtection
- feature to be edited
NXException
RemoteException
void reorderFeature(Feature[] features, Feature target, FeatureCollection.ReorderType beforeOrAfter) throws NXException, RemoteException
features
- nxopen.features.Feature
to be reorderedtarget
- Target featurebeforeOrAfter
- Reorder Before/AfterNXException
RemoteException
MirrorCurveBuilder createMirrorCurveBuilder(Feature mirrorCurve) throws NXException, RemoteException
MirrorCurveBuilder
mirrorCurve
- MirrorCurve
to be editedNXException
RemoteException
PromotionBuilder createPromotionBuilder(Promotion promotion) throws NXException, RemoteException
PromotionBuilder
promotion
- Promotion
to be editedNXException
RemoteException
RefitFaceBuilder createRefitFaceBuilder(RefitFace refitFace) throws NXException, RemoteException
refitFace
- RefitFace
to be editedNXException
RemoteException
EditDimensionBuilder createEditDimensionBuilder() throws NXException, RemoteException
EditDimensionBuilder
NXException
RemoteException
AdaptiveShellBuilder createAdaptiveShellBuilder(AdaptiveShell shellFace) throws NXException, RemoteException
AdaptiveShellBuilder
shellFace
- AdaptiveShell
to be editedAdaptiveShellBuilder
objectNXException
RemoteException
ShellFaceBuilder createShellFaceBuilder(ShellFace shellFace) throws NXException, RemoteException
ShellFaceBuilder
shellFace
- ShellFace
to be editedShellFaceBuilder
objectNXException
RemoteException
ChangeShellThicknessBuilder createChangeShellThicknessBuilder(ChangeShellThickness shellFace) throws NXException, RemoteException
ChangeShellThicknessBuilder
shellFace
- ChangeShellThickness
to be editedChangeShellThicknessBuilder
objectNXException
RemoteException
LinkedFacetBuilder createLinkedFacetBuilder(LinkedFacet linkedFacet) throws NXException, RemoteException
LinkedFacetBuilder
linkedFacet
- LinkedFacet
to be editedNXException
RemoteException
SilhouetteFlangeBuilder createSilhouetteFlangeBuilder(SilhouetteFlange silhouetteFlange) throws NXException, RemoteException
SilhouetteFlangeBuilder
silhouetteFlange
- SilhouetteFlange
to be editedNXException
RemoteException
ReplaceFeatureBuilder createReplaceFeatureBuilder() throws NXException, RemoteException
nxopen.features.ReplaceFeatureBuilder
NXException
RemoteException
PaintParametersBuilder createPaintParametersBuilder() throws NXException, RemoteException
PaintParametersBuilder
NXException
RemoteException
SmoothSplineBuilder createSmoothSplineBuilder(SmoothSpline smoothSpline) throws NXException, RemoteException
SmoothSplineBuilder
smoothSpline
- SmoothSpline
to be editedNXException
RemoteException
SymmetricBuilder createSymmetricBuilder(Symmetric symmetric) throws NXException, RemoteException
SymmetricBuilder
symmetric
- Symmetric
to be editedNXException
RemoteException
FeatureReplayBuilder createFeatureReplayBuilder() throws NXException, RemoteException
FeatureReplayBuilder
NXException
RemoteException
SplitBodyBuilder createSplitBodyBuilder(SplitBody splitBody) throws NXException, RemoteException
SplitBodyBuilder
splitBody
- SplitBody
to be editedNXException
RemoteException
SplitBodyBuilder createSplitBodyBuilderUsingCollector(SplitBody splitBody) throws NXException, RemoteException
SplitBodyBuilder
. Leverage body collectors if possible
splitBody
- SplitBody
to be editedNXException
RemoteException
TrimBody2Builder createTrimBody2Builder(TrimBody2 trimBody2) throws NXException, RemoteException
TrimBody2Builder
for Trim Body
feature
trimBody2
- TrimBody2
to be editedNXException
RemoteException
AngularDimBuilder createAngularDimensionBuilder(AngularDim angularDimension) throws NXException, RemoteException
AngularDimBuilder
angularDimension
- AngularDim
to be editedNXException
RemoteException
SectionEditBuilder createSectionEditBuilder(SectionEdit sectionEdit) throws NXException, RemoteException
SectionEditBuilder
sectionEdit
- SectionEdit
to be editedNXException
RemoteException
PullFaceBuilder createPullFaceBuilder(PullFace pullFace) throws NXException, RemoteException
PullFaceBuilder
pullFace
- PullFace
to be editedNXException
RemoteException
MidSurfaceByFacePairsBuilder createMidSurfaceByFacePairsBuilder(Feature midSurfaceByFacePairs) throws NXException, RemoteException
MidSurfaceByFacePairsBuilder
midSurfaceByFacePairs
- MidSurfaceByFacePairs
to be edited or a MidSurfaceFacePair
NXException
RemoteException
MidSurfaceUserDefinedBuilder createMidSurfaceUserDefinedBuilder(MidSurfaceUserDefined midsurfaceUserDefined) throws NXException, RemoteException
MidSurfaceUserDefinedBuilder
midsurfaceUserDefined
- MidSurfaceUserDefined
to be editedNXException
RemoteException
PatternFeatureBuilder createPatternFeatureBuilder(Feature patternFeature) throws NXException, RemoteException
nxopen.features.PatternFeatureBuilder
patternFeature
- nxopen.features.PatternFeatureBuilder
to be editedNXException
RemoteException
InstanceFeatureBuilder createInstanceFeatureBuilder(InstanceFeature instanceFeature) throws NXException, RemoteException
nxopen.features.InstanceFeatureBuilder
instanceFeature
- nxopen.features.InstanceFeature
to be editednxopen.features.InstanceFeatureBuilder
objectNXException
RemoteException
InstanceFeatureBuilder createInstanceFeatureBuilder(InstanceFeature[] instanceFeatures, boolean forClocking) throws NXException, RemoteException
nxopen.features.InstanceFeatureBuilder
from multiple nxopen.features.InstanceFeature
instanceFeatures
- array of nxopen.features.InstanceFeature
to be editedforClocking
- nxopen.features.InstanceFeatureBuilder
objectNXException
RemoteException
FeatureBuilder createVehicleCoordinateSystemBuilder(Feature vehicleCoordinateSystem) throws NXException, RemoteException
Features.VehicleDesignCollection#createHoodVisibilityBuilder
instead.
VehicleCoordinateSystemBuilder
vehicleCoordinateSystem
- feature to be edited
NXException
RemoteException
AestheticFaceBlendBuilder createAestheticFaceBlendBuilder(AestheticFaceBlend aestheticFaceBlend) throws NXException, RemoteException
AestheticFaceBlendBuilder
aestheticFaceBlend
- AestheticFaceBlend
to be editedNXException
RemoteException
EdgeSymmetryBuilder createEdgeSymmetryBuilder(Feature edgeSymmetry) throws NXException, RemoteException
EdgeSymmetryBuilder
edgeSymmetry
- EdgeSymmetry
to be edited.
Accepts MatchEdge
type if
MatchEdgeBuilder.Types
is
MatchEdgeBuilder.Types.MATCH_EDGE_TO_DATUM
.
In that case converts MatchEdge
to
EdgeSymmetry
feature.NXException
RemoteException
ReplaceBlendBuilder createReplaceBlendBuilder(ReplaceBlend replaceBlend) throws NXException, RemoteException
ReplaceBlendBuilder
replaceBlend
- ReplaceBlend
to be editedReplaceBlendBuilder
objectNXException
RemoteException
SketchConversionReport replaceWithIndependentSketch(Feature[] features) throws NXException, RemoteException
features
- Features to be replacedNXException
RemoteException
MakeOffsetBuilder createMakeOffsetBuilder(MakeOffset makeOffset) throws NXException, RemoteException
MakeOffsetBuilder
makeOffset
- MakeOffset
to be editedNXException
RemoteException
OptimizeFaceBuilder createOptimizeFaceBuilder() throws NXException, RemoteException
OptimizeFaceBuilder
NXException
RemoteException
ShowRelatedFacesBuilder createShowRelatedFacesBuilder() throws NXException, RemoteException
ShowRelatedFacesBuilder
NXException
RemoteException
FixedBuilder createFixedBuilder(Fixed makeFix) throws NXException, RemoteException
FixedBuilder
makeFix
- Fixed
to be editedNXException
RemoteException
LabelChamferBuilder createLabelChamferBuilder(LabelChamfer labelChamfer) throws NXException, RemoteException
LabelChamferBuilder
labelChamfer
- LabelChamfer
to be editedNXException
RemoteException
ResizeChamferBuilder createResizeChamferBuilder(ResizeChamfer resizeChamfer) throws NXException, RemoteException
ResizeChamferBuilder
resizeChamfer
- ResizeChamfer
to be editedNXException
RemoteException
MapleBuilder createMapleBuilder(Maple maple) throws NXException, RemoteException
maple
- Maple
to be editedNXException
RemoteException
ConcaveFacesBuilder createConcaveFacesBuilder(ConcaveFaces concaveFaces) throws NXException, RemoteException
ConcaveFacesBuilder
concaveFaces
- ConcaveFaces
to be editedNXException
RemoteException
VirtualCurveBuilder createVirtualCurveBuilder(VirtualCurve virtualCurve) throws NXException, RemoteException
VirtualCurveBuilder
virtualCurve
- VirtualCurve
to be editedNXException
RemoteException
VirtualBlendEdgeBuilder createVirtualBlendEdgeBuilder() throws NXException, RemoteException
NXException
RemoteException
IFormBuilder createIformBuilder(IForm iform) throws NXException, RemoteException
IFormBuilder
iform
- IForm
to be editedNXException
RemoteException
LawCurveBuilder createLawCurveBuilder(LawCurve lawCurve) throws NXException, RemoteException
LawCurveBuilder
lawCurve
- LawCurve
to be editedNXException
RemoteException
TextBuilder createTextBuilder(Text text) throws NXException, RemoteException
text
- Text
to be editedNXException
RemoteException
FeatureGroup activeGroup() throws NXException, RemoteException
NXException
RemoteException
DeleteEdgeBuilder createDeleteEdgeBuilder(DeleteEdge deleteEdge) throws NXException, RemoteException
DeleteEdgeBuilder
deleteEdge
- DeleteEdge
to be editedNXException
RemoteException
CopyPasteBuilder createCopyPasteBuilder2(NXObject[] features) throws NXException, RemoteException
CopyPasteBuilder
features
- Features to be copy/pasteNXException
RemoteException
ReorderBlendsBuilder createReorderBlendsBuilder(ReorderBlends reorderBlends) throws NXException, RemoteException
ReorderBlendsBuilder
reorderBlends
- ReorderBlends
to be editedNXException
RemoteException
IsoparametricCurvesBuilder createIsoparametricCurvesBuilder(IsoparametricCurves isoparametricCurves) throws NXException, RemoteException
IsoparametricCurvesBuilder
isoparametricCurves
- IsoparametricCurves
to be editedNXException
RemoteException
void convertToNewFeatureGroups() throws NXException, RemoteException
convertToSequentialFeatureGroups()
or convertToFloatingFeatureGroups()
instead.
NXException
RemoteException
void convertToFloatingFeatureGroups() throws NXException, RemoteException
NXException
RemoteException
void convertToSequentialFeatureGroups() throws NXException, RemoteException
NXException
RemoteException
VariableOffsetBuilder createVariableOffsetBuilder(VariableOffset variableOffset) throws NXException, RemoteException
VariableOffsetBuilder
variableOffset
- VariableOffset
to be editedNXException
RemoteException
ExtensionBuilder createExtensionBuilder(Extension extension) throws NXException, RemoteException
ExtensionBuilder
extension
- Extension
to be editedNXException
RemoteException
StudioSplineBuilderEx createStudioSplineBuilderEx(NXObject spline) throws NXException, RemoteException
spline
- StudioSpline
or Spline
to be editedNXException
RemoteException
SketchSplineBuilder createSketchSplineBuilder(Spline spline) throws NXException, RemoteException
spline
- Spline
to be editedNXException
RemoteException
DraftingSplineBuilder createDraftingSplineBuilder(Spline spline) throws NXException, RemoteException
spline
- Spline
to be editedNXException
RemoteException
BridgeSurfaceBuilder createBridgeSurfaceBuilder(BridgeSurface bridgeSurface) throws NXException, RemoteException
BridgeSurfaceBuilder
bridgeSurface
- BridgeSurface
to be editedNXException
RemoteException
EditCrossSectionBuilder createEditCrossSectionBuilder(EditCrossSection editCrossSection) throws NXException, RemoteException
EditCrossSectionBuilder
editCrossSection
- EditCrossSection
to be editedNXException
RemoteException
LabelNotchBlendBuilder createLabelNotchBlendBuilder(LabelNotchBlend labelNotchBlend) throws NXException, RemoteException
LabelNotchBlendBuilder
labelNotchBlend
- LabelNotchBlend
to be editedNXException
RemoteException
void setEditWithRollbackFeature(Feature feature) throws NXException, RemoteException
feature
- nxopen.features.Feature
to be editedNXException
RemoteException
void setCanResetMcf(boolean canResetMcf) throws NXException, RemoteException
canResetMcf
- NXException
RemoteException
PartModuleBuilder createPartModuleBuilder(PartModule partModule) throws NXException, RemoteException
PartModuleBuilder
partModule
- PartModule
to be editedNXException
RemoteException
PartModuleRelationshipBuilder createPartModuleRelationshipBuilder(PartModule partModule) throws NXException, RemoteException
PartModuleRelationshipBuilder
partModule
- PartModule
to be editedNXException
RemoteException
DeleteBodyBuilder createDeleteBodyBuilder(DeleteBody deleteBody) throws NXException, RemoteException
DeleteBodyBuilder
deleteBody
- DeleteBody
to be editedNXException
RemoteException
IsolateFeatureBuilder createIsolateFeatureBuilder(IsolateFeature isolateFeature) throws NXException, RemoteException
nxopen.features.IsolateFeatureBuilder
isolateFeature
- NXException
RemoteException
HelixBuilder createHelixBuilder(Helix helix) throws NXException, RemoteException
helix
- Helix
to be editedNXException
RemoteException
ColorFeatureBuilder createColorFeatureBuilder() throws NXException, RemoteException
nxopen.features.ColorFeatureBuilder
NXException
RemoteException
ColorFeatureGroupBuilder createColorFeatureGroupBuilder() throws NXException, RemoteException
nxopen.features.ColorFeatureGroupBuilder
NXException
RemoteException
BridgeCurveBuilderEx createBridgeCurveBuilderEx(BridgeCurve bridgeCurve) throws NXException, RemoteException
BridgeCurveBuilderEx
bridgeCurve
- BridgeCurve
to be editedNXException
RemoteException
FitCurveBuilder createFitCurveBuilder(FitCurve fitCurve) throws NXException, RemoteException
FitCurveBuilder
fitCurve
- FitCurve
to be editedNXException
RemoteException
SketchFitCurveBuilder createSketchFitCurveBuilder(Curve fitCurve) throws NXException, RemoteException
SketchFitCurveBuilder
fitCurve
- Curve
to be editedNXException
RemoteException
EmbossBodyBuilder createEmbossBodyBuilder(EmbossBody embossBody) throws NXException, RemoteException
EmbossBodyBuilder
embossBody
- EmbossBody
to be editedNXException
RemoteException
GeneralConicBuilder createGeneralConicBuilder(GeneralConic generalConic) throws NXException, RemoteException
GeneralConicBuilder
generalConic
- GeneralConic
to be editedNXException
RemoteException
FitSurfaceBuilder createFitSurfaceBuilder(FitSurface fitSurface) throws NXException, RemoteException
FitSurfaceBuilder
fitSurface
- FitSurface
to be editedNXException
RemoteException
SphericalCornerBuilder createSphericalCornerBuilder(SphericalCorner sphericalCorner) throws NXException, RemoteException
SphericalCornerBuilder
sphericalCorner
- SphericalCorner
to be editedNXException
RemoteException
Feature getParentFeatureOfFace(Face face) throws NXException, RemoteException
face
- Face
whose parent feature you wantnxopen.features.Feature
of the input Face
NXException
RemoteException
Feature[] getAssociatedFeaturesOfFace(Face face) throws NXException, RemoteException
face
- Face
whose associated features you wantnxopen.features.Feature
s of the input Face
NXException
RemoteException
Feature[] getParentFeaturesOfEdge(Edge edge) throws NXException, RemoteException
edge
- Edge
whose parent features you wantnxopen.features.Feature
s of the input Edge
NXException
RemoteException
Feature[] getAssociatedFeaturesOfEdge(Edge edge) throws NXException, RemoteException
edge
- Edge
whose associated features you wantnxopen.features.Feature
s of the input Edge
NXException
RemoteException
Feature getParentFeatureOfBody(Body body) throws NXException, RemoteException
body
- Body
whose parent features you wantnxopen.features.Feature
of the input Body
NXException
RemoteException
Feature[] getAssociatedFeaturesOfBody(Body body) throws NXException, RemoteException
body
- Body
whose associated features you wantnxopen.features.Feature
s of the input Body
NXException
RemoteException
SectionSurfaceBuilderEx createSectionSurfaceBuilderEx(SectionSurface sectionSurfaceEx) throws NXException, RemoteException
SectionSurfaceBuilderEx
sectionSurfaceEx
- SectionSurface
to be editedNXException
RemoteException
PatternFaceFeatureBuilder createPatternFaceFeatureBuilder(PatternFaceFeature patternFaceFeature) throws NXException, RemoteException
nxopen.features.PatternFaceFeatureBuilder
patternFaceFeature
- nxopen.features.PatternFaceFeature
to be editedNXException
RemoteException
RenameLinkedPartModulePartBuilder createRenameLinkedPartModulePartBuilder() throws NXException, RemoteException
NXException
RemoteException
ConvertFeatureGroupsToModulesBuilder createConvertFeatureGroupsToModulesBuilder() throws NXException, RemoteException
ConvertFeatureGroupsToModulesBuilder
NXException
RemoteException
NestModuleBuilder createNestModuleBuilder() throws NXException, RemoteException
FeatureCollection
instead.
NestModuleBuilder
FeatureCollection
instead.
NestModuleBuilder
builder
NXException
RemoteException
PatternGeometryBuilder createPatternGeometryBuilder(PatternGeometry patternGeometry) throws NXException, RemoteException
PatternGeometryBuilder
patternGeometry
- The feature class PatternGeometry
NXException
RemoteException
UnnestModuleBuilder createUnnestModuleBuilder() throws NXException, RemoteException
FeatureCollection
instead.
UnnestModuleBuilder
FeatureCollection
instead.
UnnestModuleBuilder
builder
NXException
RemoteException
BlendPocketBuilder createBlendPocketBuilder(BlendPocket blendPocket) throws NXException, RemoteException
BlendPocketBuilder
blendPocket
- BlendPocket
to be editedNXException
RemoteException
AnalyzePocketBuilder createAnalyzePocketBuilder(AnalyzePocket analyzePocket) throws NXException, RemoteException
AnalyzePocketBuilder
analyzePocket
- AnalyzePocket
to be editedNXException
RemoteException
OptimizeCurveBuilder createOptimizeCurveBuilder() throws NXException, RemoteException
OptimizeCurveBuilder
NXException
RemoteException
void reorganizeFeature(Feature[] features, Feature target, FeatureCollection.ReorderType beforeOrAfter) throws NXException, RemoteException
features
- nxopen.features.Feature
to be reorganizedtarget
- Target featurebeforeOrAfter
- Reorder Before/AfterNXException
RemoteException
void deleteInformationalAlerts(NXObject[] feature) throws NXException, RemoteException
feature
- Array of feature on which information alerts are to be deletedNXException
RemoteException
void deleteWarningAlerts(NXObject[] feature) throws NXException, RemoteException
feature
- Array of feature on which warning alerts are to be deletedNXException
RemoteException
FlowBlendBuilder createFlowBlendBuilder(FlowBlend flowBlend) throws NXException, RemoteException
Features.FlowBlendBuilder
flowBlend
- Features.FlowBlend
to be editedNXException
RemoteException
Copyright 2011 Siemens Product Lifecycle Management Software Inc. All Rights Reserved.