nxopen.features

Interface BlendCornerBuilder

public interface BlendCornerBuilder

Represents a BlendCorner builder.
To create a new instance of this class, use FreeformSurfaceCollection.createBlendCornerBuilder(nxopen.features.BlendCorner)
Default values.

Property	Value
AllowTransitionCurveOnBlends	1
Continuity	G1
Fullness.Value	0 (millimeters part), 0 (inches part)
SewToBody	1
UseCenterPoint	0

Created in NX9.0.0

Nested Class Summary

Nested Classes

Modifier and Type	Interface and Description
static class	BlendCornerBuilder.ContinuityTypes Continuity options

Method Summary

Modifier and Type	Method and Description
boolean	allowTransitionCurveOnBlends() Returns the transition curve on blend faces License requirements: None.
double	angleTolerance() Returns the angle tolerance.
Point	centerPoint() Returns the center point.
BlendCornerBuilder.ContinuityTypes	continuity() Returns the continuity type License requirements: None.
BlendSetbackBuilder	createBlendSetbackBuilder() Create a blend setback builder object.
TransitionCurveBuilder	createTransitionCurveBuilder() Create a transition curve data builder object.
double	distanceTolerance() Returns the distance tolerance.
Expression	fullness() Returns the fullness value.
BlendSetbackBuilderList	limitCurveList() Returns the limit curve list License requirements: None.
void	setAllowTransitionCurveOnBlends(boolean allow) License requirements: nx_freeform_2 ("advanced freeform modeling") .
void	setAngleTolerance(double angleTolerance) License requirements: nx_freeform_2 ("advanced freeform modeling") .
void	setCenterPoint(Point centerPoint) License requirements: nx_freeform_2 ("advanced freeform modeling") .
void	setContinuity(BlendCornerBuilder.ContinuityTypes continuity) License requirements: nx_freeform_2 ("advanced freeform modeling") .
void	setDistanceTolerance(double distanceTolerance) License requirements: nx_freeform_2 ("advanced freeform modeling") .
void	setSewToBody(boolean sewToBody) License requirements: nx_freeform_2 ("advanced freeform modeling") .
void	setUseCenterPoint(boolean useCenterPoint) License requirements: nx_freeform_2 ("advanced freeform modeling") .
boolean	sewToBody() Returns the sew to body License requirements: None.
TransitionCurveBuilderList	transitionCurveList() Returns the transition curve list License requirements: None.
boolean	useCenterPoint() Returns the use center point flag.

Method Detail

createBlendSetbackBuilder

BlendSetbackBuilder createBlendSetbackBuilder()
                                       throws NXException,
                                              RemoteException

Create a blend setback builder object.
License requirements: nx_freeform_2 ("advanced freeform modeling")

Created in NX9.0.0

Throws:

NXException

RemoteException

limitCurveList

BlendSetbackBuilderList limitCurveList()
                                throws NXException,
                                       RemoteException

Returns the limit curve list
License requirements: None.

Created in NX9.0.0

Throws:

NXException

RemoteException

createTransitionCurveBuilder

TransitionCurveBuilder createTransitionCurveBuilder()
                                             throws NXException,
                                                    RemoteException

Create a transition curve data builder object.
License requirements: nx_freeform_2 ("advanced freeform modeling")

Created in NX9.0.0

Throws:

NXException

RemoteException

transitionCurveList

TransitionCurveBuilderList transitionCurveList()
                                        throws NXException,
                                               RemoteException

Returns the transition curve list
License requirements: None.

Created in NX9.0.0

Throws:

NXException

RemoteException

useCenterPoint

boolean useCenterPoint()
                throws NXException,
                       RemoteException

Returns the use center point flag. It will enable/disable the shape fullness control. When the control is enabled, the patch surface will pass through the specified center point.
License requirements: None.

Created in NX9.0.0

Throws:

NXException

RemoteException

setUseCenterPoint

void setUseCenterPoint(boolean useCenterPoint)
                throws NXException,
                       RemoteException

License requirements: nx_freeform_2 ("advanced freeform modeling")
.
Created in NX9.0.0

Parameters:

useCenterPoint -

Throws:

NXException

RemoteException

fullness

Expression fullness()
             throws NXException,
                    RemoteException

Returns the fullness value. It is an offset distance of the center point from the default position when the center point control is off.
License requirements: None.

Created in NX9.0.0

Throws:

NXException

RemoteException

centerPoint

Point centerPoint()
           throws NXException,
                  RemoteException

Returns the center point. The corner patch will pass through the center point.
License requirements: None.

Created in NX9.0.0

Throws:

NXException

RemoteException

setCenterPoint

void setCenterPoint(Point centerPoint)
             throws NXException,
                    RemoteException

License requirements: nx_freeform_2 ("advanced freeform modeling")
.
Created in NX9.0.0

Parameters:

centerPoint -

Throws:

NXException

RemoteException

sewToBody

boolean sewToBody()
           throws NXException,
                  RemoteException

Returns the sew to body
License requirements: None.

Created in NX9.0.0

Throws:

NXException

RemoteException

setSewToBody

void setSewToBody(boolean sewToBody)
           throws NXException,
                  RemoteException

License requirements: nx_freeform_2 ("advanced freeform modeling")
.
Created in NX9.0.0

Parameters:

sewToBody -

Throws:

NXException

RemoteException

allowTransitionCurveOnBlends

boolean allowTransitionCurveOnBlends()
                              throws NXException,
                                     RemoteException

Returns the transition curve on blend faces
License requirements: None.

Created in NX9.0.0

Throws:

NXException

RemoteException

setAllowTransitionCurveOnBlends

void setAllowTransitionCurveOnBlends(boolean allow)
                              throws NXException,
                                     RemoteException

License requirements: nx_freeform_2 ("advanced freeform modeling")
.
Created in NX9.0.0

Parameters:

allow -

Throws:

NXException

RemoteException

continuity

BlendCornerBuilder.ContinuityTypes continuity()
                                       throws NXException,
                                              RemoteException

Returns the continuity type
License requirements: None.

Created in NX9.0.0

Throws:

NXException

RemoteException

setContinuity

void setContinuity(BlendCornerBuilder.ContinuityTypes continuity)
            throws NXException,
                   RemoteException

License requirements: nx_freeform_2 ("advanced freeform modeling")
.
Created in NX9.0.0

Parameters:

continuity -

Throws:

NXException

RemoteException

distanceTolerance

double distanceTolerance()
                  throws NXException,
                         RemoteException

Returns the distance tolerance. It will be used to control the precision of curves and corner surface
License requirements: None.

Created in NX9.0.0

Throws:

NXException

RemoteException

setDistanceTolerance

void setDistanceTolerance(double distanceTolerance)
                   throws NXException,
                          RemoteException

License requirements: nx_freeform_2 ("advanced freeform modeling")
.
Created in NX9.0.0

Parameters:

distanceTolerance -

Throws:

NXException

RemoteException

angleTolerance

double angleTolerance()
               throws NXException,
                      RemoteException

Returns the angle tolerance. It will be used to control the tangency of the curves and corner surface
License requirements: None.

Created in NX9.0.0

Throws:

NXException

RemoteException

setAngleTolerance

void setAngleTolerance(double angleTolerance)
                throws NXException,
                       RemoteException

License requirements: nx_freeform_2 ("advanced freeform modeling")
.
Created in NX9.0.0

Parameters:

angleTolerance -

Throws:

NXException

RemoteException