Skip navigation links
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z _ 

F

F - Static variable in class nxopen.cae.DurabilityDamageEvaluationBuilder.BwiWeldClassEnum
F
F - Static variable in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.BwiWeldClassEnum
F
F - Static variable in class nxopen.cae.responsesimulation.DataLocation.Beam
 
F - Static variable in class nxopen.cae.responsesimulation.ElementalFunctionEvalBeamLocation
 
F - Static variable in class nxopen.cae.responsesimulation.NodalFunctionEvalBeamLocation
Stress Recovery point F on a beam cross section
F - Static variable in class nxopen.cam.TurnToolBuilder.HolderStyles
F-Style
f1() - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder
Returns the f1
License requirements: None.
f1() - Method in interface nxopen.annotations.SurfaceFinishBuilder
Returns the f1
License requirements: None.
F11 - Static variable in class nxopen.display.CameraBuilder.Aperture
f11
F16 - Static variable in class nxopen.display.CameraBuilder.Aperture
f16
f2() - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder
Returns the f2
License requirements: None.
f2() - Method in interface nxopen.annotations.SurfaceFinishBuilder
Returns the f2
License requirements: None.
F2 - Static variable in class nxopen.cae.DurabilityDamageEvaluationBuilder.BwiWeldClassEnum
F2
F2 - Static variable in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.BwiWeldClassEnum
F2
F22 - Static variable in class nxopen.display.CameraBuilder.Aperture
f22
F25 - Static variable in class nxopen.cam.TurnToolBuilder.ReliefAngleTypes
Relief angle type: F (25)
F28 - Static variable in class nxopen.display.CameraBuilder.Aperture
f2.8
F56 - Static variable in class nxopen.display.CameraBuilder.Aperture
f5.6
F8 - Static variable in class nxopen.display.CameraBuilder.Aperture
f8
FABRICATION - Static variable in class nxopen.routing.RouteManager.PartType
 
fabricationNumbering() - Method in interface nxopen.annotations.BillOfMaterialBuilder
Returns the value that specifies the fabrication numbering.
fabricationNumberingFlag() - Method in interface nxopen.preferences.RoutingPart
Returns the fabrication numbering for the Routing bill of material.
fabricationObjects() - Method in interface nxopen.weld.InformationBuilder
Returns the list of weld fabrication objects to create the output.
face() - Method in interface nxopen.annotations.BaseCenterline3dBuilder
Returns the face
License requirements: None.
face() - Method in interface nxopen.annotations.SymmetricalCenterlineBuilder
Returns the face object of Symmetrical Centerline
License requirements: None.
FACE - Static variable in class nxopen.bodydes.OnestepUnformBuilder.Object
face
face() - Method in interface nxopen.cae.ElementExtrudeBuilder
Returns the face when extrude by project to surface
License requirements: None.
face() - Method in interface nxopen.cae.ElementProjectBuilder
Returns the face on which projection will happen
License requirements: None.
face - Variable in class nxopen.cae.MappedMeshBuilder.CornerData
 
face() - Method in interface nxopen.cae.MeshPointOnFaceBuilder
Returns the node
License requirements: None.
FACE - Static variable in class nxopen.cae.optimization.Geometry
Face
FACE - Static variable in class nxopen.cae.PostGraphBuilder.EntityType
 
FACE - Static variable in class nxopen.cae.SimLoadRecipeMapEntryTargetTypes.TargetTypes
 
FACE - Static variable in class nxopen.cam.DrillSurfaceBuilder.SurfaceType
face
FACE - Static variable in class nxopen.cam.SurfaceRegions.FeatureTypes
type to face
FACE - Static variable in class nxopen.cam.TurnRoughFinishTestCut.SecondarySequenceTypes
Secondary Test Cut Sequence: Face
face() - Method in interface nxopen.cam.TurnStock
Returns the face stock
License requirements: None.
FACE - Static variable in class nxopen.die.FingerClearanceNotchBuilder.Types
Build from either a single face or a set of connected faces.
FACE - Static variable in class nxopen.die.MachineReliefBuilder.TrimSheetTypes
Trimming surface is a face, or faces to be sewed together.
Face - Interface in nxopen
Represents a face .
face - Variable in class nxopen.FaceBossPocketFacesRule.DefiningData
Faces which creates this rule
face - Variable in class nxopen.FaceMergedRibFacesRule.Data
Faces which creates this rule
face - Variable in class nxopen.FaceMergedRibFacesRule.DefiningData
Faces which creates this rule
face - Variable in class nxopen.FaceMergedRibFacesRule.SeedAndPointData
Faces which creates this rule
face - Variable in class nxopen.FaceRibFacesRule.DefiningData
Faces which creates this rule
face - Variable in class nxopen.FaceSlotFacesRule.DefiningData
Faces which creates this rule
FACE - Static variable in class nxopen.features.AeroFlangeBuilder.GuideObjectTypes
Guide object is face
FACE - Static variable in class nxopen.features.AeroRibBuilder.GuideObjectTypes
Guide object is face
FACE - Static variable in class nxopen.features.AestheticFaceBlendBuilder.EndTrimObjectType
Override end trim object with face.
FACE - Static variable in class nxopen.features.AestheticFaceBlendBuilder.StartTrimObjectType
Override start trim object with face.
face() - Method in interface nxopen.features.ColorFaceBuilder
Returns the face to color.
FACE - Static variable in class nxopen.features.DeleteFaceBuilder.SelectTypes
This stands for delete face type.
FACE - Static variable in class nxopen.features.DraftBuilder.Type
Face Draft type
face() - Method in interface nxopen.features.EditCrossSectionBuilder
Returns the face collector.
FACE - Static variable in class nxopen.features.EmbossLimit.EndcapSourceOption
Indicates the geometries are selected surfaces not on the target.
face() - Method in interface nxopen.features.EmbossProjection
Returns the projection face
License requirements: None.
FACE - Static variable in class nxopen.features.EmbossProjection.ProjectionOption
Indicates the geometries are selected faces.
face() - Method in interface nxopen.features.EnlargeBuilder
Returns the face
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
FACE - Static variable in class nxopen.features.ExtractFaceBuilder.ExtractType
type to extract face
FACE - Static variable in class nxopen.features.FitCurveBuilder.TargetSourceTypes
Face
FACE - Static variable in class nxopen.features.GeodesicIntersectBuilder.Type
Face.
FACE - Static variable in class nxopen.features.MatchedReferenceBuilder.Types
single face or datum plane
face() - Method in interface nxopen.features.OffsetRegionBuilder
Returns the faces to offset, don't use it until nx502
License requirements: None.
FACE - Static variable in class nxopen.features.PartGeometryCopyBuilder.Type
Face
face() - Method in interface nxopen.features.PartGeometryCopySelectBuilder
Returns the face
License requirements: None.
face() - Method in interface nxopen.features.PatternFaceBuilder
Returns the faces to pattern, don't use it until nx502
License requirements: None.
face() - Method in interface nxopen.features.RefitFaceBuilder
Returns the refitting face
License requirements: None.
face() - Method in interface nxopen.features.ResizeFaceBuilder
Returns the faces to resize, don't use it until nx502
License requirements: None.
FACE - Static variable in class nxopen.features.sheetmetal.BendTaperBuilder.WebTaperType
Face
FACE - Static variable in class nxopen.features.ShelfBuilder.ReferenceType
 
FACE - Static variable in class nxopen.features.shipdesign.ManufacturingStockBuilder.ObjectType
Face
FACE - Static variable in class nxopen.features.StepBuilder.ReferenceBoundaryTypes
Select faces as reference boundary object
FACE - Static variable in class nxopen.features.UnsewBuilder.UnsewTool
selected faces to unsew
face() - Method in interface nxopen.features.VariableOffsetBuilder
Returns the face to be offset
License requirements: None.
FACE - Static variable in class nxopen.features.vehicledesign.AllAroundVisionBuilder.WindowTypes
Face Object for Windows.
FACE - Static variable in class nxopen.features.vehicledesign.CloseRangeCameraListItemBuilder.Types
Face type
FACE - Static variable in class nxopen.geometricanalysis.GeometricProperties.Entity
Face
Face() - Constructor for class nxopen.geometricanalysis.GeometricProperties.Face
 
Face(double, double, Point3d, Vector3d, Vector3d, Vector3d, Point3d, Vector3d, Vector3d, Vector3d, double, double) - Constructor for class nxopen.geometricanalysis.GeometricProperties.Face
Constructor for the Face object.
face - Variable in class nxopen.geometricanalysis.GeometricProperties.FacePropertiesData
Face Properties
face() - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder
Returns the (second) faces.
face() - Method in interface nxopen.geometricutilities.BlendSetbackBuilder
Returns the blend face collector.
FACE - Static variable in class nxopen.geometricutilities.FacePlaneSelectionBuilder.TrimObjectType
face end cap
face() - Method in interface nxopen.geometricutilities.LocalUntrimBuilder
Returns the tool object to split the target body.
face() - Method in interface nxopen.geometricutilities.SnipIntoPatchesBuilder
Returns the face to snip into patches
License requirements: None.
face() - Method in interface nxopen.tooling.EdgePatchBuilder
Returns the face to use to search for loops.
FACE - Static variable in class nxopen.tooling.EdgePatchBuilder.SelectTypes
Face types
FACE - Static variable in class nxopen.tooling.EjectorPostProcessingBuilder.TrimSufaceName
Select faces
face() - Method in interface nxopen.tooling.ElectrodeComponentBuilder
Returns the face whose center will be the origin of the machine set csys.
face() - Method in interface nxopen.tooling.ElectrodeInitializationBuilder
Returns the face whose center will be the origin of the machine set csys.
face() - Method in interface nxopen.tooling.ManufacturingGeometryBuilder
Returns the face to use as the region faces of the geometry groups.
FACE - Static variable in class nxopen.tooling.ObjectAttributeManagementBuilder.FilterAccordingToAttributeType
 
FACE - Static variable in class nxopen.tooling.ObjectAttributeManagementBuilder.FilterType
 
FACE - Static variable in class nxopen.tooling.RemoveHolesBuilder.SelectionTypes
select face type
FACE - Static variable in class nxopen.tooling.TrimSolidBuilder.Types
Region with body faces.
FACE - Static variable in class nxopen.uf.UFConstants
 
face - Variable in class nxopen.uf.UFModeling.AskSubdivFaceParmsData
 
face - Variable in class nxopen.uf.UFModl.RefitFaceData
 
face - Variable in class nxopen.uf.UFModlFeatures.AskEnlargeData
 
face - Variable in class nxopen.uf.UFSo.DirrOnSurfData
 
face - Variable in class nxopen.uf.UFSo.OffsetSurfCvtrData
 
Face.FaceType - Class in nxopen
Solid face type.
face1 - Variable in class nxopen.uf.UFModeling.AskThruFacesData
 
face1 - Variable in class nxopen.uf.UFSf.ResultingFacePairs
 
face1() - Method in interface nxopen.weld.PlugSlotBuilder
Returns the face1
License requirements: None.
face1Tag - Variable in class nxopen.uf.UFModl.DevchkEeInfo
 
face2 - Variable in class nxopen.uf.UFModeling.AskThruFacesData
 
face2 - Variable in class nxopen.uf.UFSf.ResultingFacePairs
 
face2() - Method in interface nxopen.weld.PlugSlotBuilder
Returns the face2
License requirements: None.
FACE2LINES - Static variable in class nxopen.features.shipdesign.Cutout2Builder.CreationMethod
1 face and 2 lines, edges, or datums are used to place this cutout
FACE2LINES - Static variable in class nxopen.features.shipdesign.ShipCutoutBuilder.CreationMethod
1 face and 2 lines, edges, or datums are used to place this cutout
face2Tag - Variable in class nxopen.uf.UFModl.DevchkEeInfo
 
FACE_ADJACENT - Static variable in class nxopen.SelectionIntentRule.RuleType
See documentation for FaceAdjacentRule for more details
FACE_ALL_BLEND - Static variable in class nxopen.SelectionIntentRule.RuleType
See documentation for FaceAllBlendRule for more details
FACE_ANALYSIS - Static variable in class nxopen.preferences.ViewVisualizationVisual.DisplayModeType
Deprecated.
Display faces using the color analysis data
FACE_ANALYSIS - Static variable in class nxopen.preferences.ViewVisualizationVisual.RenderingStyle
 
FACE_ANALYSIS - Static variable in class nxopen.View.RenderingStyleType
 
FACE_ANALYSIS_REFLECTION_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
 
FACE_ANALYSIS_REFLECTION_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
 
FACE_ANALYSIS_STYLE - Static variable in class nxopen.uf.UFView.RenderingStyle
 
FACE_AND_ADJACENT_FACES - Static variable in class nxopen.SelectionIntentRule.RuleType
See documentation for FaceAndAdjacentFacesRule for more details
FACE_AND_EDGE - Static variable in class nxopen.features.shipdesign.EndCutBuilder.SelectionTypes
If this Selection Type is set, then a single pair of a Face (Placement Face) and an edge(Placement Edge) needs to be specified.
FACE_AND_NORMAL_VECTOR - Static variable in class nxopen.cae.FluidDomainBuilder.IntExtType
The interior specified by providing a face and a normal.
FACE_AREA_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
Face area property
FACE_AXIS_POINT - Static variable in class nxopen.PlaneTypes.MethodType
Through Face Axis at Point
FACE_BODY - Static variable in class nxopen.SelectionIntentRule.RuleType
See documentation for FaceBodyRule for more details
FACE_BOSS_POCKET - Static variable in class nxopen.SelectionIntentRule.RuleType
See documentation for FaceBossPocketFacesRule for more details
FACE_CENTRAL_ANGLE - Static variable in class nxopen.die.QuickBinderBuilder.EditTypes
Change the central angle of a conical/cylindrical face.
FACE_CHAIN - Static variable in class nxopen.features.ExtractFaceBuilder.FaceOptionType
selection intent option
FACE_CHAIN - Static variable in class nxopen.features.sheetmetal.BendTaperBuilder.WebTaperType
Face Chain
FACE_COLLECTOR - Static variable in class nxopen.features.MatchedReferenceBuilder.Types
face collector
FACE_COLORS - Static variable in class nxopen.cam.FeatureTeaching.RuleMatchOptionType
 
FACE_CONNECTED_BLEND - Static variable in class nxopen.SelectionIntentRule.RuleType
See documentation for FaceConnectedBlendRule for more details
FACE_DENSITY_SIZE - Static variable in class nxopen.cae.MeshControlBuilder.Types
 
FACE_DUMB - Static variable in class nxopen.SelectionIntentRule.RuleType
See documentation for FaceDumbRule for more details
FACE_EDGE - Static variable in class nxopen.features.shipdesign.ShipEndCutBuilder.CreationMethod
1 face and 1 edge are used to place this endcut
FACE_EDGE_BLEND - Static variable in class nxopen.features.DeleteFaceBuilder.SelectTypes
This stands for delete notch blend type.
FACE_EXTENSION_CIRC - Static variable in class nxopen.uf.UFModl.FaceExtension
 
FACE_EXTENSION_CURV - Static variable in class nxopen.uf.UFModl.FaceExtension
 
FACE_EXTENSION_LINEAR - Static variable in class nxopen.uf.UFModl.FaceExtension
 
FACE_EXTENSION_NATURAL - Static variable in class nxopen.uf.UFModl.FaceExtension
 
FACE_EXTENSION_NONE - Static variable in class nxopen.uf.UFModl.FaceExtension
 
FACE_FEATURE - Static variable in class nxopen.SelectionIntentRule.RuleType
See documentation for FaceFeatureRule for more details
FACE_GROUP - Static variable in class nxopen.cae.SimLoadRecipeMapEntryTargetTypes.TargetTypes
 
FACE_GROUP - Static variable in class nxopen.geometricutilities.ReduceSurfaceRadiusBuilder.ReducedFaceTypeSpecification
Preview all items in face group list when using "Select Faces by Radius" to select input objects.
FACE_LINK - Static variable in class nxopen.features.WaveLinkBuilder.Types
 
FACE_MERGED_RIB - Static variable in class nxopen.SelectionIntentRule.RuleType
See documentation for FaceMergedRibFacesRule for more details
FACE_MESH - Static variable in class nxopen.cae.SimLoadRecipeMapEntryTargetTypes.TargetTypes
 
FACE_MIN_RADIUS_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
Face minimum radius property
FACE_NORMAL - Static variable in class nxopen.features.shipdesign.EdgeReinforcementBuilder.OrientationMethods
 
FACE_NORMAL - Static variable in class nxopen.features.shipdesign.ProfileBuilder.OrientationOption
 
FACE_NORMAL - Static variable in class nxopen.features.shipdesign.StiffenerBuilder.MountingMethods
Offset stiffener along placement face normal
FACE_NORMAL - Static variable in class nxopen.features.shipdesign.StiffenerBuilder.OrientationMethod
Align stiffener with face normal
FACE_NORMAL - Static variable in class nxopen.features.shipdesign.StiffenerSystemBuilder.MountingMethods
Offset stiffener along placement face normal
FACE_NORMAL - Static variable in class nxopen.features.shipdesign.StiffenerSystemBuilder.OrientationMethods
 
FACE_NORMAL - Static variable in class nxopen.features.SilhouetteFlangeBuilder.ReferenceDirectionOptions
Create flange along face normal
FACE_NORMAL - Static variable in class nxopen.geometricutilities.ProjectionOptions.DirectionType
Face Normal
FACE_NORMAL - Static variable in class nxopen.weld.WeldProjectionMethod
creates a sphere
FACE_NORMALS - Static variable in class nxopen.uf.UFModl.SmholeDirectionType
 
FACE_NOT_RECTANGULAR - Static variable in class nxopen.uf.UFConstants
 
FACE_OFFSET - Static variable in class nxopen.features.LabelChamferBuilder.ChamferType
 
FACE_OR_PLANE - Static variable in class nxopen.features.DeleteFaceBuilder.CapOptionValues
face or plane.
FACE_OR_PLANE - Static variable in class nxopen.geometricutilities.BooleanToolBuilder.BooleanToolType
Tool consists of sets of faces or datum planes
FACE_PARALLELISM - Static variable in class nxopen.weld.WeldAdvisorCheckerType
face parallelism
FACE_PERCENTAGE - Static variable in class nxopen.features.PointSetBuilder.FacePointsType
A point will be created at given face percentages.
FACE_PERIMETER_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
Face perimeter property
FACE_PLANARITY - Static variable in class nxopen.weld.WeldAdvisorCheckerType
face planarity
FACE_PLANE - Static variable in class nxopen.cae.responsesimulation.StrainGageOrientationPlane
 
FACE_PLANE - Static variable in class nxopen.features.shipdesign.SplitStandardPartBuilder.ToolTypes
Face or plane object.
FACE_PMIDATUM_FEATURE_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
Face PMI datum feature property
FACE_PMIDATUM_TARGET_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
Face PMI datum target property
FACE_PMIFCFCHAR_FORM_TOL_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
Face PMI FCF form characteristics property
FACE_PMIFCFCHAR_LOCATION_TOL_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
Face PMI FCF location characteristics property
FACE_PMIFCFCHAR_ORIENTATION_TOL_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
Face PMI FCF orientation characteristics property
FACE_PMIFCFCHAR_PROFILE_TOL_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
Face PMI FCF profile characteristics property
FACE_PMIFCFCHAR_RUNOUT_TOL_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
Face PMI FCF runout characteristics property
FACE_PMIFCFCHARACTERISTICS_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
Face PMI FCF characteristics property
FACE_PMIFCFPROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
Face PMI FCF property
FACE_POINTS - Static variable in class nxopen.features.PointSetBuilder.Types
Create points on face
FACE_PROPERTIES - Static variable in class nxopen.GenericMeasure.Type
 
FACE_PROPERTIES - Static variable in class nxopen.tooling.MWMoldedPartValidationBuilder.CheckScope
face properties
FACE_RADIUS - Static variable in class nxopen.die.QuickBinderBuilder.EditTypes
Change the face radius of a conical/cylindrical face.
FACE_REGION - Static variable in class nxopen.SelectionIntentRule.RuleType
See documentation for FaceRegionRule for more details
FACE_REGION_BOUNDARY - Static variable in class nxopen.SelectionIntentRule.RuleType
See documentation for FaceRegionBoundaryRule for more details
FACE_REVERSE_CONVEXITY - Static variable in class nxopen.die.QuickBinderBuilder.EditTypes
Reverse the convexity of a conical/cylindrical face.
FACE_RIB - Static variable in class nxopen.SelectionIntentRule.RuleType
See documentation for FaceRibFacesRule for more details
FACE_SELF_INTERSECTION - Static variable in class nxopen.geometricanalysis.ExamineGeometry.Check
FaceSelfIntersection
FACE_SET1 - Static variable in class nxopen.geometricanalysis.SurfaceIntersectionBuilder.NormalTypes
linear needle
FACE_SET2 - Static variable in class nxopen.geometricanalysis.SurfaceIntersectionBuilder.NormalTypes
logarithmic needle
FACE_SLOT - Static variable in class nxopen.SelectionIntentRule.RuleType
See documentation for FaceSlotFacesRule for more details
FACE_SMOOTHNESS - Static variable in class nxopen.geometricanalysis.ExamineGeometry.Check
FaceSmoothness
FACE_SPIKES_CUTS - Static variable in class nxopen.geometricanalysis.ExamineGeometry.Check
FaceSpikesCuts
FACE_TANGENT - Static variable in class nxopen.SelectionIntentRule.RuleType
See documentation for FaceTangentRule for more details
FACE_TO_FACE - Static variable in class nxopen.geometricanalysis.DeviationChecking.Types
check face to face deviation
FACE_TOPO - Static variable in class nxopen.uf.UFBrep.TopoType
 
FACE_TYPE_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
Face type property
FACE_WARP_COEFFICIENT - Static variable in class nxopen.cae.modelcheck.TestValueTypes.TestType
 
FaceAdjacentRule - Interface in nxopen
Represents a SelectionIntentRule that collects the faces adjacent to the seed face of a body.
FaceAllBlendRule - Interface in nxopen
Represents a SelectionIntentRule that collects all blend faces.
FaceAllBlendRule.DefiningData - Class in nxopen
This class holds the data returned from FaceAllBlendRule.getDefiningData()
faceAllFacesColor() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
Returns the color for applying to all faces on the Face Tab page.
faceAnalysis() - Method in interface nxopen.fields.DisplayPropertiesBuilder
Returns the face analysis
License requirements: None.
faceAnalysis() - Method in interface nxopen.preferences.PartObject
Returns the face analysis flag for Solid and Sheets
License requirements: None.
faceAnalysisMode() - Method in interface nxopen.DisplayModification
Returns the face analysis mode flag.
faceAnalysisViewsType() - Method in interface nxopen.display.SelPref
Returns the face analysis views type
License requirements: None.
FaceAndAdjacentFacesRule - Interface in nxopen
Represents a SelectionIntentRule that collects both the seed face and all its adjacent faces.
faceAskAdjacentFaces(Tag) - Method in interface nxopen.uf.UFSf
Refer to UF_SF_face_ask_adjacent_faces for documentation.
FaceAskAdjacentFacesData() - Constructor for class nxopen.uf.UFSf.FaceAskAdjacentFacesData
 
faceAskArea(Tag) - Method in interface nxopen.uf.UFSf
Refer to UF_SF_face_ask_area for documentation.
faceAskBody(Tag) - Method in interface nxopen.uf.UFSf
Refer to UF_SF_face_ask_body for documentation.
faceAskBoundingBox(Tag) - Method in interface nxopen.uf.UFSf
Refer to UF_SF_face_ask_bounding_box for documentation.
faceAskEdges(Tag) - Method in interface nxopen.uf.UFSf
Refer to UF_SF_face_ask_edges for documentation.
FaceAskEdgesData() - Constructor for class nxopen.uf.UFSf.FaceAskEdgesData
 
FaceAttributeBuilder - Interface in nxopen.tooling
Represents a builder to be used to create face attribute.
FaceBlend - Interface in nxopen.features
Represents a Face Blend feature.
FaceBlendBuilder - Interface in nxopen.features
Represents a face blend builder.
FaceBlendBuilder.CrossSectionOption - Class in nxopen.features
This enum represents the Cross section types
FaceBlendBuilder.DefiningType - Class in nxopen.features
This enum represents the Face Blend defining type, it is added in NX75 for new three face blend
FaceBlendBuilder.LimitPlanesData - Class in nxopen.features
This class holds the data returned from FaceBlendBuilder.getLimitPlanes()
FaceBlendBuilder.OverflowMethod - Class in nxopen.features
This enum represents the overflow options
FaceBlendBuilder.RhoMethod - Class in nxopen.features
This enum represents the rho types
FaceBlendBuilder.TrimmingMethod - Class in nxopen.features
This enum represents the Trimming options for Face Blend
FaceBlendBuilder.Type - Class in nxopen.features
This enum represents the Face Blend types
FaceBlendBuilder.WidthMethod - Class in nxopen.features
This enum represents the Face Blend width method, it is added in NX10 for two face blend
faceBlendDefineType() - Method in interface nxopen.features.FaceBlendBuilder
Returns the face blend defining type get
License requirements: None.
FaceBodyRule - Interface in nxopen
Represents a SelectionIntentRule that collects all the faces of a body.
FaceBossPocketFacesRule - Interface in nxopen
Represents a SelectionIntentRule that collects all faces of a boss or pocket.
FaceBossPocketFacesRule.DefiningData - Class in nxopen
This class holds the data returned from FaceBossPocketFacesRule.getDefiningData()
faceBoundary() - Method in interface nxopen.geometricutilities.PatternFill
Returns the face boundary
License requirements: None.
faceChain() - Method in interface nxopen.features.ExtractFaceBuilder
Returns the face chain containing the faces to extract
License requirements: None.
faceChain1() - Method in interface nxopen.features.AestheticFaceBlendBuilder
Returns the face chain1
License requirements: None.
faceChain2() - Method in interface nxopen.features.AestheticFaceBlendBuilder
Returns the face chain2
License requirements: None.
faceChangeOverflowBehavior() - Method in interface nxopen.features.AdmMoveFaceBuilder
Returns the face change overflow behavior.
faceChangeOverflowBehavior() - Method in interface nxopen.features.AdmOffsetRegionBuilder
Returns the face change overflow behavior.
faceChangeOverflowBehavior() - Method in interface nxopen.features.CoaxialBuilder
Returns the face change overflow behavior.
faceChangeOverflowBehavior() - Method in interface nxopen.features.CoplanarBuilder
Returns the face change overflow behavior.
faceChangeOverflowBehavior() - Method in interface nxopen.features.DimensionBuilder
Returns the face change overflow behavior.
faceChangeOverflowBehavior() - Method in interface nxopen.features.EditCrossSectionBuilder
Returns the face change overflow behavior.
faceChangeOverflowBehavior() - Method in interface nxopen.features.MakeOffsetBuilder
Returns the face change overflow behavior.
faceChangeOverflowBehavior() - Method in interface nxopen.features.ParallelBuilder
Returns the face change overflow behavior.
faceChangeOverflowBehavior() - Method in interface nxopen.features.PerpendicularBuilder
Returns the face change overflow behavior.
faceChangeOverflowBehavior() - Method in interface nxopen.features.ReplaceFaceBuilder
Returns the face change overflow behavior.
faceChangeOverflowBehavior() - Method in interface nxopen.features.TangentBuilder
Returns the face change overflow behavior.
FaceClearanceCheckBuilder - Interface in nxopen.cae.modelcheck
Represents a FaceClearanceCheckBuilder to perform polygon face interference or clearance check.
faceCnt - Variable in class nxopen.uf.UFCurve.AskIsoclineData
 
FaceCollector - Interface in nxopen.blockstyler
Represents a Face Collector .
faceCollector() - Method in interface nxopen.features.AOCSBuilder
Returns the face collector.
faceCollector() - Method in interface nxopen.features.DeleteFaceBuilder
Returns the face collector holding the faces to delete, don't use it until nx502
License requirements: None.
faceCollector() - Method in interface nxopen.features.FaceRecognitionBuilder
Returns the face collector
License requirements: None.
faceCollector() - Method in interface nxopen.features.OffsetFaceBuilder
Returns the face collector
License requirements: None.
faceCollector() - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
Returns the face collector
License requirements: None.
faceCollector() - Method in interface nxopen.features.sheetmetal.RebendBuilder
Returns the unbent faces to rebend
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
faceCollector() - Method in interface nxopen.features.sheetmetal.UnbendBuilder
Returns the bend faces
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
faceCollector() - Method in interface nxopen.features.ThickenBuilder
Returns the faces to thicken.
faceCollector() - Method in interface nxopen.features.UnsewBuilder
Returns the face collector
License requirements: None.
faceCollector() - Method in interface nxopen.geometricutilities.FaceSetData
Returns the face set collector
License requirements: None.
faceCollector() - Method in interface nxopen.geometricutilities.FaceSetOffset
Returns the face collector
License requirements: None.
faceCollector() - Method in interface nxopen.MeasureFaceBuilder
Returns the face collector
License requirements: None.
faceCollector() - Method in interface nxopen.modldirect.SelectBlend
Returns the blend faces collector.
faceCollector() - Method in interface nxopen.SketchIntersectionCurveBuilder
Returns the faces to intersect
License requirements: None.
faceCollector - Variable in class nxopen.uf.UFNxsm.RebendData
 
faceCollector - Variable in class nxopen.uf.UFNxsm.UnbendData
 
faceColor - Variable in class nxopen.cae.Post.EdgeFace
 
faceColor() - Method in interface nxopen.tooling.FaceColorManagementBuilder
Returns the face color
License requirements: None.
faceColor() - Method in interface nxopen.tooling.MWDefineRegionsBuilder
Returns the face color for the selected region faces
License requirements: None.
faceColorManagement() - Method in interface nxopen.tooling.ToolingManager
Returns the FaceColorManagementCollection instance belonging to this part .
FaceColorManagementBuilder - Interface in nxopen.tooling
Tooling builder to assign and edit color of objects
To create a new instance of this class, use FaceColorManagementCollection.createFaceColorManagementBuilder()
Default values.
FaceColorManagementBuilder.HoleTypeEnumValue - Class in nxopen.tooling
the hole type enumeration
FaceColorManagementCollection - Interface in nxopen.tooling
Creates a FaceColorManagementBuilder
To obtain an instance of this class, refer to ToolingManager

Created in NX9.0.0
FaceConnectedBlendRule - Interface in nxopen
Represents a SelectionIntentRule that collects all connected blend faces.
FaceConnectedBlendRule.DefiningData - Class in nxopen
This class holds the data returned from FaceConnectedBlendRule.getDefiningData()
FaceConstraintCollectorsData() - Constructor for class nxopen.features.MeshSurfaceBuilder.FaceConstraintCollectorsData
 
faceConstraintDirection() - Method in interface nxopen.features.MeshSurfaceBuilder
Returns
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
faceCount - Variable in class nxopen.uf.UFSubdiv.Isocline
 
faceCrossoverFacesColor() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
Returns the color for applying to the crossover faces on the Face Tab page.
FaceCurvatureAnalysis - Interface in nxopen.geometricanalysis
Represents a Face Curvature Analysis builder
To create or edit an instance of this class, use FaceCurvatureAnalysisBuilder

Created in NX8.0.0
FaceCurvatureAnalysisBuilder - Interface in nxopen.geometricanalysis
Represents a FaceCurvatureAnalysisBuilder builder.
FaceCurvatureAnalysisBuilder.CurvatureTypes - Class in nxopen.geometricanalysis
Represents the face curvature types.
FaceCurvatureAnalysisBuilder.DirectionTypes - Class in nxopen.geometricanalysis
Methods of specifiying the direction for normal and section curvatures.
FaceCurvatureAnalysisBuilder.DisplayTypes - Class in nxopen.geometricanalysis
Represents the display types.
FaceCurvatureAnalysisBuilder.ScaleTypes - Class in nxopen.geometricanalysis
Represents the scaling types for curvature values.
faceCurveDirectionAdjustment() - Method in interface nxopen.assemblies.RelinkerBuilder
Returns the option to adjust face or curve direction.
faceData - Variable in class nxopen.uf.UFCurve.OcfData
 
FaceDensity - Interface in nxopen.cae
Represents a CAE face density .
faceDensitySize() - Method in interface nxopen.cae.MeshControlDisplayOptionsBuilder
Returns the face density size
License requirements: None.
faceDirection() - Method in interface nxopen.features.PromotionBuilder
Returns the face direction for a sheet body
License requirements: None.
faceDirectionOption() - Method in interface nxopen.geometricutilities.BridgeCurveConnectivity
Returns the face direction option
License requirements: None.
faceDisplay() - Method in interface nxopen.drawings.ViewWorkflowBuilder
Returns the face display provides options in an extracted edge view that are available for selection
License requirements: None.
faceDraftAngleLimit() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
Returns the draft angle limit on the Face Tab page.
FaceDumbRule - Interface in nxopen
Represents a SelectionIntentRule that collects faces without any intent i.e. as if collected with Single Face rule.
faceEdgeBlendPreference() - Method in interface nxopen.features.DeleteFaceBuilder
Returns the preference option indicating wether to delete undetermined blend chain as notch chain or as cliff chain
License requirements: None.
faceEdgesColor - Variable in class nxopen.uf.UFDisp.SystemParams
 
faceEvaluateParamLocation(Tag, double[]) - Method in interface nxopen.uf.UFSf
Refer to UF_SF_face_evaluate_param_location for documentation.
faceExtension - Variable in class nxopen.uf.UFModl.Faces
 
FaceFeatureRule - Interface in nxopen
Represents a SelectionIntentRule that collects all faces created or modified by a feature.
faceFillGapDistance() - Method in interface nxopen.weld.FilletBuilder
Returns the distance the fillet will span when there are gaps in the sheet definition.
faceFinder() - Method in interface nxopen.features.StudioXformBuilderEx
Returns the face finder
License requirements: None.
faceForRamp() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
Returns the sweep face for editing ramp.
FaceFromBoundaryBuilder - Interface in nxopen.cae
Builder for creating Polygon Face by boundary
To create a new instance of this class, use AbstractionManager.createFaceFromBoundaryBuilder()

Created in NX8.5.0
faceGapDistance() - Method in interface nxopen.weld.AutoPointBuilder
Returns the face gap distance.
faceGroupList() - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusBuilder
Returns the list containing the face chains as input objects used to do reduction.
faceHandle - Variable in class nxopen.uf.UFWeld.SpotFaceLoc
 
faceHighlightSelectedFaces() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
Returns the option for highlighting the selected faces on the Face Tab page.
faceIndexToEdit() - Method in interface nxopen.die.QuickBinderBuilder
Returns the index of the face to edit.
faceIntegralOption() - Method in interface nxopen.cae.ResultProbeBuilder
Returns the face integral option
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
faceIntegralOptionValue() - Method in interface nxopen.cae.PostGraphBuilder
Returns the weighted average or integral option on selecting Face
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
faceInterferenceType() - Method in interface nxopen.geometricanalysis.SimpleInterference
Returns the FaceInterferenceType.
faceLinkTag - Variable in class nxopen.uf.UFMotion.PointOnSurfaceData
 
faceList - Variable in class nxopen.uf.UFMfm.AskListOfFacesData
 
faceLoc - Variable in class nxopen.uf.UFWeld.SpotData
 
faceLoc - Variable in class nxopen.uf.UFWeld.SpotInfo
 
faceMap - Variable in class nxopen.uf.UFGdt.ModlData
 
FaceMergedRibFacesRule - Interface in nxopen
Represents a SelectionIntentRule that collects all merged rib faces.
FaceMergedRibFacesRule.Data - Class in nxopen
This class holds the data returned from FaceMergedRibFacesRule.getData()
FaceMergedRibFacesRule.DefiningData - Class in nxopen
This class holds the data returned from FaceMergedRibFacesRule.getDefiningData()
FaceMergedRibFacesRule.SeedAndPointData - Class in nxopen
This class holds the data returned from FaceMergedRibFacesRule.getSeedAndPointData()
FaceMilling - Interface in nxopen.cam
Represents a Face Milling Operation
To create or edit an instance of this class, use FaceMillingBuilder

Created in NX7.5.0
FaceMillingBuilder - Interface in nxopen.cam
Represents a FaceMilling Builder
To create a new instance of this class, use OperationCollection.createFaceMillingBuilder(nxopen.cam.CAMObject)

Created in NX5.0.0
faceNegativeFacesColor1() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
Returns the color for applying to the negative small radius faces on the Face Tab page.
faceNegativeFacesColor2() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
Returns the color for applying to the negative faces on the Face Tab page.
faceNonSelectedFacesTranslucency() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
Returns the translucency for the non-selected faces on the Face Tab page.
faceNormal() - Method in interface nxopen.cae.FluidDomainBuilder
Returns the face normal
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")
.
faceNormal - Variable in class nxopen.uf.UFWeld.SpotFaceLoc
 
faceNormal - Variable in class nxopen.uf.UFWeld.SpotFaceLocation
 
facenormaloppositefin - Variable in class nxopen.weld.WeldBeadPathBuilder.UpdatePathData
Normal if path is opposite direction of parasolid fin.
facenormalwithfin - Variable in class nxopen.weld.WeldBeadPathBuilder.UpdatePathData
Normal if path is in direction of parasolid fin
faceObjects() - Method in interface nxopen.MeasureFaceBuilder
Returns the face objects
License requirements: None.
faceOfFirstEdge() - Method in interface nxopen.geometricanalysis.DeviationChecking
Returns the face associated with the first edge or edge - required for the deviation checking when DeviationChecking.type() and DeviationChecking.setType(nxopen.geometricanalysis.DeviationChecking.Types) is set to DeviationChecking.Types.EDGE_TO_EDGE or DeviationChecking.Types.EDGE_TO_FACE .
faceOffset() - Method in interface nxopen.features.shipdesign.StiffenerBuilder
Returns the face offset expression
License requirements: None.
faceOffsetExpression() - Method in interface nxopen.features.shipdesign.ProfileBuilder
Returns the face offset expression
License requirements: None.
faceOffsetVector() - Method in interface nxopen.features.shipdesign.ProfileBuilder
Returns the face offset vector
License requirements: None.
faceOfSecondEdge() - Method in interface nxopen.geometricanalysis.DeviationChecking
Returns the face associated with the second edge - required for the deviation checking when DeviationChecking.type() and DeviationChecking.setType(nxopen.geometricanalysis.DeviationChecking.Types) is set to DeviationChecking.Types.EDGE_TO_EDGE .
faceOption() - Method in interface nxopen.features.ExtractFaceBuilder
Returns the face option type
License requirements: None.
facepairAskMidsrfFrec(Tag) - Method in interface nxopen.uf.UFSf
Refer to UF_SF_facepair_ask_midsrf_frec for documentation.
FacePairData() - Constructor for class nxopen.features.sheetmetal.ClosedCornerBuilder.FacePairData
 
FacePairData() - Constructor for class nxopen.features.sheetmetal.EditCornerBuilder.FacePairData
 
FacePairData() - Constructor for class nxopen.features.sheetmetal.ThreeBendCornerBuilder.FacePairData
 
facePairType - Variable in class nxopen.uf.UFModeling.AskFacepairParmsData
 
facePercentageList() - Method in interface nxopen.features.PointSetBuilder
Returns the face percentage list.
facePlaneBoundary() - Method in interface nxopen.features.shipdesign.PlateBuilder
Returns the face, plane boundary, which defines a list of trimming objects with offset values.
FacePlaneSelectionBuilder - Interface in nxopen.geometricutilities
Represents a FacePlaneSelectionBuilder
Created in NX6.0.0
FacePlaneSelectionBuilder.TrimObjectType - Class in nxopen.geometricutilities
Specifies the object type for blend endcap objects.
FacePlaneSelectionBuilderCollection - Interface in nxopen.geometricutilities
This class contains the factory methods for creating an FacePlaneSelectionBuilder.
facePlaneSelectionBuilderData() - Method in interface nxopen.Part
Returns the FacePlaneSelectionBuilderCollection instance belonging to this part .
facePlaneTool() - Method in interface nxopen.geometricutilities.BooleanToolBuilder
Returns the FacePlaneTool Builder.
FacePlaneToolBuilder - Interface in nxopen.geometricutilities
a sub-component of BooleanToolBuilder.
facePnt - Variable in class nxopen.uf.UFModeling.AskFaceParmData
 
facePointsBy() - Method in interface nxopen.features.PointSetBuilder
Returns the face points definition setting.
facePositiveFacesColor1() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
Returns the color for applying to the positive faces on the Face Tab page.
facePositiveFacesColor2() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
Returns the color for applying to the positive small radius faces on the Face Tab page.
FacePropertiesData() - Constructor for class nxopen.geometricanalysis.GeometricProperties.FacePropertiesData
 
FaceRecognitionBuilder - Interface in nxopen.features
Represents a collection of faces and their relationships to other faces in the model .
faceRecognizer() - Method in interface nxopen.features.MatchEdgeBuilder
Returns the face recognition
License requirements: None.
FaceRegionBoundaryRule - Interface in nxopen
Represents a SelectionIntentRule that collects a region of faces that are tangent connected.
FaceRegionBoundaryRule.Data - Class in nxopen
This class holds the data returned from FaceRegionBoundaryRule.getData()
FaceRegionRule - Interface in nxopen
Represents a SelectionIntentRule that collects a region of faces.
faceReverse() - Method in interface nxopen.features.vehicledesign.CloseRangeCameraListItemBuilder
Returns the indication if the selected camera face surface should be reversed.
faceReverseDirection() - Method in interface nxopen.features.ExtractFaceBuilder
Returns the option specifying whether to reverse the face normals for the extracted faces.
faceReverseDirection() - Method in interface nxopen.features.shipdesign.StiffenerBuilder
Returns the face reverse direction flag
License requirements: None.
faceReverseDirection() - Method in interface nxopen.tooling.ReplaceSolidBuilder
Returns the face reverse direction status.
FaceRibFacesRule - Interface in nxopen
Represents a SelectionIntentRule that collects all rib faces.
FaceRibFacesRule.DefiningData - Class in nxopen
This class holds the data returned from FaceRibFacesRule.getDefiningData()
faceRules() - Method in interface nxopen.blockstyler.FaceCollector
Returns the FaceRules
License requirements: None.
FACES - Static variable in class nxopen.blockstyler.SelectObject.FilterType
Filter to select all face types
FACES - Static variable in class nxopen.cae.ResultProbeBuilder.SelectionType
 
FACES - Static variable in class nxopen.cam.Preferences.AuxiliaryFloorColorSelectionTypes
Deprecated.
Faces
FACES - Static variable in class nxopen.cam.Preferences.BlankSelectionTypes
Deprecated.
Faces
FACES - Static variable in class nxopen.cam.Preferences.CheckSelectionTypes
Deprecated.
Faces
FACES - Static variable in class nxopen.cam.Preferences.CutAreaSelectionTypes
Deprecated.
Faces
FACES - Static variable in class nxopen.cam.Preferences.PartSelectionTypes
Deprecated.
Faces
FACES - Static variable in class nxopen.cam.Preferences.SelectionTypes
faces
FACES - Static variable in class nxopen.cam.Preferences.WallSelectionTypes
Deprecated.
Faces
faces() - Method in interface nxopen.cam.SurfaceRegions
Returns the faces
License requirements: None.
faces() - Method in interface nxopen.die.QuickBinderBuilder
Returns the product faces used to perform the initial approximation.
faces() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
Returns the collection of formed faces
License requirements: None.
faces() - Method in interface nxopen.features.ConcaveFacesBuilder
Returns the collection of all the possible faces.
faces() - Method in interface nxopen.features.CurveOnSurfaceBuilder
Returns the face collector
License requirements: solid_modeling ("SOLIDS MODELING")
.
FACES - Static variable in class nxopen.features.DraftBodyBuilder.Types
Faces to Draft
faces() - Method in interface nxopen.features.LawExtensionBuilder
Returns the faces.
FACES - Static variable in class nxopen.features.LawExtensionBuilder.Types
Reference faces
faces() - Method in interface nxopen.features.LawExtensionBuilderEx
Returns the faces.
FACES - Static variable in class nxopen.features.LawExtensionBuilderEx.Types
Reference faces
faces() - Method in interface nxopen.features.PatchOpeningsBuilder
Returns the faces to form patching boundary.
faces() - Method in interface nxopen.features.ResizeChamferBuilder
Returns the faces
License requirements: None.
FACES - Static variable in class nxopen.features.shipdesign.HullBuilder.Types
Mold face is being defined by selected faces.
faces - Variable in class nxopen.features.shipdesign.StiffenerBuilder.CreatePathData
The faces/datums defining the placement of the profile that is being oriented.
faces() - Method in interface nxopen.features.WrapBuilder
Returns the faces that the curves are being unwrapped from or wrapped to.
FACES - Static variable in class nxopen.fields.SpatialMap.SubtypeMappingEnum
Map 3D degenerate data to faces
faces() - Method in interface nxopen.geometricanalysis.HighlightLinesAnalysisBuilder
Returns the face list
License requirements: None.
faces() - Method in interface nxopen.mechatronics.TransportSurfaceBuilder
Returns the faces.
FACES - Static variable in class nxopen.preferences.PartVisualizationColorSetting.RandomColorDisplayFor
For Faces
faces() - Method in interface nxopen.routing.FittingOverstockBuilder
Returns the faces to apply overstock to.
faces() - Method in interface nxopen.routing.OverstockFacesBuilder
Returns the faces qualified for overstock application.
FACES - Static variable in class nxopen.Selection.SelectionType
Filter to select all face types
faces - Variable in class nxopen.uf.UFCurve.AskIsoclineData
 
faces - Variable in class nxopen.uf.UFDie.AskDrawFacesData
 
faces - Variable in class nxopen.uf.UFGdt.AskFacesData
 
faces - Variable in class nxopen.uf.UFGdt.SurfaceParms
 
faces - Variable in class nxopen.uf.UFModeling.AskMergedFacesData
 
faces - Variable in class nxopen.uf.UFModeling.AskSplitFacesData
 
faces - Variable in class nxopen.uf.UFModl.ComparePartEntitiesData
 
faces - Variable in class nxopen.uf.UFModl.ComparePartEntitiesData3
 
Faces() - Constructor for class nxopen.uf.UFModl.Faces
 
Faces(int, Tag[], UFModl.FaceExtension) - Constructor for class nxopen.uf.UFModl.Faces
 
faces - Variable in class nxopen.uf.UFModl.Faces
 
faces - Variable in class nxopen.uf.UFModl.IdentifyExteriorUsingHlData
 
faces - Variable in class nxopen.uf.UFModl.IdentifyExteriorUsingRaysData
 
faces - Variable in class nxopen.uf.UFModl.LinkedExt
 
faces - Variable in class nxopen.uf.UFSf.AskIdealizeParmFacesData
 
faces - Variable in class nxopen.uf.UFSf.BodyAskFacesData
 
faces - Variable in class nxopen.uf.UFSf.EdgeAskFacesData
 
faces - Variable in class nxopen.uf.UFSf.FaceAskAdjacentFacesData
 
faces - Variable in class nxopen.uf.UFSmd.AskFpFacesData
 
FACES2SURFACES - Static variable in class nxopen.features.shipdesign.Cutout2Builder.CreationMethod
1 face and 2 surfaces are used to place this cutout
FACES_AND_TRIM - Static variable in class nxopen.features.ChamferBuilder.OffsetMethod
Offset faces and trim
FACES_BETWEEN_SURFACES_SURFACE - Static variable in class nxopen.features.shipdesign.Cutout2Builder.CreationMethod
1 face and 3 surfaces are used to place this cutout
FACES_CENTERED - Static variable in class nxopen.features.shipdesign.Cutout2Builder.CreationMethod
1 face is used to place this cutout
FACES_DO_NOT_MATCH_UV_RANGE - Static variable in class nxopen.uf.UFConstants
 
FACES_ON_DIFFERENT_BODIES - Static variable in class nxopen.uf.UFConstants
 
FACES_ONLY - Static variable in class nxopen.cam.ProfileStrategy.Types
Profile strategy: Faces Only
FACES_THEN_DIAMETERS - Static variable in class nxopen.cam.ProfileStrategy.Types
Profile strategy: Faces First, Then Diameters
FACES_WITH_ATTRIBUTES - Static variable in class nxopen.features.shipdesign.EndCutBuilder.SelectionTypes
If this Selection Type is set, just faces need to be specifed and placement edges will be inferred automatically.
facesCons - Variable in class nxopen.features.MeshSurfaceBuilder.FaceConstraintCollectorsData
Number of faces on each side
faceSearchOption() - Method in interface nxopen.cae.MMCCreateBuilder
Returns the face search option
License requirements: None.
facesEid - Variable in class nxopen.uf.UFModl.ReblendFace
 
faceSelect() - Method in interface nxopen.cae.FreezeGeometryBuilder
Returns the faceselect
License requirements: nx_masterfem ("Finite Element Modeling")
.
faceSelect() - Method in interface nxopen.weld.JointmarkFaceSetsBuilder
Returns the selected face collector
License requirements: ugweld ("UG WELD")
.
faceSelectAllFaces() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
Returns the option for turning on/off the selection of all faces on the Face Tab page.
faceSelectCrossoverFaces() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
Returns the option for turning on/off the highlight of the crossover faces on the Face Tab page.
faceSelectedFacesTranslucency() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
Returns the translucency for the selected faces on the Face Tab page.
faceSelection() - Method in interface nxopen.cae.FluidDomainBuilder
Returns the face selection
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")
.
faceSelection() - Method in interface nxopen.cae.LaminateDrapingDataBuilder
Returns the selected faces.
faceSelectNegativeFaces1() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
Returns the option for turning on/off the highlight of the negative small radius faces on the Face Tab page.
faceSelectNegativeFaces2() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
Returns the option for turning on/off the highlight of the negative faces on the Face Tab page.
faceSelectPositiveFaces1() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
Returns the option for turning on/off the highlight of the positive faces on the Face Tab page.
faceSelectPositiveFaces2() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
Returns the option for turning on/off the highlight of the positive small radius faces on the Face Tab page.
faceSelectUndercutAreas() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
Returns the option for turning on/off the highlight of the undercut area faces on the Face Tab page.
faceSelectUndercutEdges() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
Returns the option for turning on/off the highlight of the undercut edges on the Face Tab page.
faceSelectVerticalFaces() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
Returns the option for turning on/off the highlight of the vertical faces on the Face Tab page.
faceSet1() - Method in interface nxopen.features.subdivision.SubdivisionBridgeFaceBuilder
Returns the first face set.
faceSet1() - Method in interface nxopen.weld.FilletBuilder
Returns the face set1.
faceSet1() - Method in interface nxopen.weld.WeldGrooveBuilder
Returns the face set1
License requirements: ugweld ("UG WELD")
.
faceSet2() - Method in interface nxopen.features.subdivision.SubdivisionBridgeFaceBuilder
Returns the second face set.
faceSet2() - Method in interface nxopen.weld.FilletBuilder
Returns the face set2.
faceSet2() - Method in interface nxopen.weld.WeldGrooveBuilder
Returns the face set2
License requirements: ugweld ("UG WELD")
.
faceSetAllFacesColor() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
Action button for setting color on all faces on the Face Tab page.
faceSetAngleExpressionList() - Method in interface nxopen.features.DraftBuilder
Returns the list of draft faces SC Collectors and corresponding draft angles.
FaceSetData - Interface in nxopen.geometricutilities
Represents a FaceSetData
Created in NX5.0.0
faceSetData() - Method in interface nxopen.Part
Returns the FaceSetDataCollection instance belonging to this part .
FaceSetData() - Constructor for class nxopen.weld.WeldPointBuilder.FaceSetData
 
FaceSetDataCollection - Interface in nxopen.geometricutilities
Deprecated.
Deprecated in NX8.5.0. This class is never used and can be safely removed
FaceSetOffset - Interface in nxopen.geometricutilities
This class represents a face set (collector) offset data.
FaceSetOffsetCollection - Interface in nxopen.geometricutilities
This class contains the factory methods for creating an face set offset.
FaceSetOffsetList - Interface in nxopen.geometricutilities
Represents a list of objects.
faceSetOffsets() - Method in interface nxopen.Part
Returns the FaceSetOffsets instance belonging to this part .
faceSets() - Method in interface nxopen.features.OffsetSurfaceBuilder
Returns the list of face sets.
faceSetsList() - Method in interface nxopen.weld.JointmarkBuilder
Returns the list of face sets
License requirements: ugweld ("UG WELD")
.
faceSheet(nxopen.features.Feature) - Method in interface nxopen.die.DieCollection
Creates a nxopen.die.FaceSheetBuilder .
FaceSlotFacesRule - Interface in nxopen
Represents a SelectionIntentRule that collects all faces of a pocket.
FaceSlotFacesRule.DefiningData - Class in nxopen
This class holds the data returned from FaceSlotFacesRule.getDefiningData()
faceSmoothing() - Method in interface nxopen.cae.PolygonFaceOnMeshBuilder
Returns the angle
License requirements: None.
facesOfFeatures1 - Variable in class nxopen.EdgeIntersectRule.Data
Faces of feature1 whose boundary edges are used to create this rule.
facesOfFeatures2 - Variable in class nxopen.EdgeIntersectRule.Data
Faces of feature2 whose boundary edges are used to create this rule.
FaceSplitBuilder - Interface in nxopen.tooling
Represents a face split operation
To create a new instance of this class, use FaceSplitCollection.createFaceSplitBuilder()
Default values.
FaceSplitBuilder.FaceSplitType - Class in nxopen.tooling
the type for Split Face
FaceSplitCollection - Interface in nxopen.tooling
Creates Face Split collection
To obtain an instance of this class, refer to ToolingManager

Created in NX7.0.0
faceSplits() - Method in interface nxopen.tooling.ToolingManager
Returns the FaceSplitCollection instance belonging to this part .
FacesSequence - Interface in nxopen.cam
Represents faces sequence .
facesSequence() - Method in interface nxopen.cam.TurnCutParameters
Returns the Faces Sequence
License requirements: None.
FacesSequence.Types - Class in nxopen.cam
The faces sequence options .
facesToAnalyze() - Method in interface nxopen.cam.NCAssistantBuilder
Returns the Faces to Analyze
License requirements: None.
facesToChangeThickness() - Method in interface nxopen.features.ChangeShellThicknessBuilder
Returns the faces to be selected to change thickness
License requirements: None.
faceStock() - Method in interface nxopen.cam.BoundaryTurnBlank
Returns the face stock
License requirements: None.
faceStockBuilder() - Method in interface nxopen.cam.TurnMethodBuilder
Returns the face stock builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
facesToDivide() - Method in interface nxopen.features.DividefaceBuilder
Returns the Faces to Divide
License requirements: None.
facesToDraft() - Method in interface nxopen.features.DraftBodyBuilder
Returns the faces to draft
License requirements: None.
facesToExclude() - Method in interface nxopen.features.AdaptiveShellBuilder
Returns the faces to be excluded
License requirements: None.
facesToExtract() - Method in interface nxopen.features.ExtractFaceBuilder
Deprecated.
Deprecated in NX7.5.0. Use ExtractFaceBuilder.objectToExtract() instead.
facesToFlatten() - Method in interface nxopen.features.shipdesign.ShellExpansionBuilder
Returns the faces to flatten
License requirements: None.
facesToMerge() - Method in interface nxopen.features.subdivision.SubdivisionMergeFaceBuilder
Returns the faces to merge.
facesToMove() - Method in interface nxopen.features.DimensionBuilder
Returns the faces being moved as part of the Linear Dimension command
License requirements: None.
facesToMoveToDraftedFace() - Method in interface nxopen.features.DraftBodyBuilder
Returns the faces to move to drafted face
License requirements: None.
facesToOptimize() - Method in interface nxopen.features.OptimizeFaceBuilder
Returns the faces to optimize
License requirements: None.
facesToPierce() - Method in interface nxopen.features.AdaptiveShellBuilder
Returns the faces to be pierced
License requirements: None.
facesToPierce() - Method in interface nxopen.features.ShellFaceBuilder
Returns the faces to be pierced
License requirements: None.
facesToShell() - Method in interface nxopen.features.ShellFaceBuilder
Returns the faces to be shelled
License requirements: None.
facesToSplit() - Method in interface nxopen.features.subdivision.SubdivisionSplitFaceBuilder
Returns the faces to split.
facesToSubdivide() - Method in interface nxopen.features.subdivision.SubdivisionSubdivideFaceBuilder
Returns the faces to subdivide.
facesToUntrim() - Method in interface nxopen.features.UntrimBuilder
Returns the faces to untrim
License requirements: None.
faceStyle - Variable in class nxopen.cae.Post.EdgeFace
 
facet() - Method in interface nxopen.UFSession
 
FACET_BASED - Static variable in class nxopen.tooling.ValidCheckBuilder.AnalysisMode
Facet body will be used to do checking
FACET_BODIES - Static variable in class nxopen.cam.Preferences.SelectionTypes
facet bodies
FACET_BODIES - Static variable in class nxopen.features.GlobalShapingBuilder.DeformBodyType
Facet bodies
FACET_BODY - Static variable in class nxopen.features.FitCurveBuilder.TargetSourceTypes
Facet body
FACET_BODY - Static variable in class nxopen.features.RapidSurfaceBuilder.AttachmentTypes
attach to facet body
FACET_GEOM_TYPE - Static variable in class nxopen.uf.UFCam.BlankGeomType
 
FACET_NORMAL - Static variable in class nxopen.facet.SnipFacetBodyBuilder.DirectionType
Snip along facet normal
FACET_VERTEX - Static variable in class nxopen.InferSnapType.SnapType
Snap point on facet vertex
faceTag - Variable in class nxopen.uf.UFCurve.OcfFaceData
 
faceTag - Variable in class nxopen.uf.UFNxsm.FlatSolidData
 
faceTag - Variable in class nxopen.uf.UFSf.OrientationData
 
faceTag - Variable in class nxopen.uf.UFWeld.SpotFaceLoc
 
faceTag - Variable in class nxopen.uf.UFWeld.SpotFaceLocation
 
faceTags - Variable in class nxopen.uf.UFMotion.PointOnSurfaceData
 
faceTags - Variable in class nxopen.uf.UFSf.EfConnInfo
 
FaceTangentRule - Interface in nxopen
Represents a SelectionIntentRule that collects tangent connected faces from the body of the seed face.
FaceTangentRule.Data - Class in nxopen
This class holds the data returned from FaceTangentRule.getData()
facetAngleTol - Variable in class nxopen.uf.UFDisp.SystemParams
 
facetBodies - Variable in class nxopen.cam.PreprocessGeometryBuilder.ObjectsData
the facet bodies, corresponding to facet bodies
facetBodies() - Method in interface nxopen.facet.CurvatureBuilder
Returns the input facet body list
License requirements: None.
facetBodies() - Method in interface nxopen.facet.DecimateFacetBodyBuilder
Returns the facet bodies to be decimated
License requirements: None.
facetbodies - Variable in class nxopen.facet.FacetedBodyCollection.CreateFacetBodyData
 
facetBodies() - Method in interface nxopen.facet.FeatureExtractionBuilder
Returns the input facet body selection list
License requirements: None.
facetBodies() - Method in interface nxopen.facet.SmoothFacetBodyBuilder
Returns the facet bodies to be smoothed
License requirements: None.
facetBodies() - Method in interface nxopen.facet.SnipFacetBodyBuilder
Returns the facet bodies to snip
License requirements: None.
facetBodies() - Method in interface nxopen.facet.SubdivideFacetBodyBuilder
Returns the facet bodies to be subdivided
License requirements: None.
facetBodies() - Method in interface nxopen.features.ToolingBoxBuilder
Returns the selected facet bodies.
facetBodies() - Method in interface nxopen.NXTo2dCreator
Returns the facet bodies - if set to true facet bodies will be exported to 2d part
License requirements: None.
facetbody - Variable in class nxopen.Body.FacetedBodyData
 
facetBody() - Method in interface nxopen.facet.ExtrudeFacetBodyBuilder
Returns the facet/sheet bodies to be extruded
License requirements: None.
facetBody() - Method in interface nxopen.features.FillHoleBuilder
Returns the facet body to which the fill hole patch is fitted to
License requirements: None.
facetBody() - Method in interface nxopen.features.RapidSurfaceBuilder
Returns the facet body
License requirements: studio_free_form ("STUDIO FREE FORM")
.
FacetBodyFromBodyBuilder - Interface in nxopen.facet
Represents a FacetBodyFromBodyBuilder builder.
facetBodyOne() - Method in interface nxopen.facet.BridgeFacetBodyBuilder
Returns the first NX facet body to be bridged
License requirements: None.
facetBodyOne() - Method in interface nxopen.facet.MergeFacetBodyBuilder
Returns the first NX facet body to be merged
License requirements: None.
facetBodyTwo() - Method in interface nxopen.facet.BridgeFacetBodyBuilder
Returns the second NX facet body to be bridged
License requirements: None.
facetBodyTwo() - Method in interface nxopen.facet.MergeFacetBodyBuilder
Returns the second NX facet body to be merged
License requirements: None.
facetCacheMemoryLevel() - Method in interface nxopen.DisplayManager
Returns the memory level of the display facet cache system.
facetChordTol - Variable in class nxopen.uf.UFDisp.SystemParams
 
facetContactTolerance - Variable in class nxopen.uf.UFMotion.Ask3dContactMethodData
 
facetDensity() - Method in interface nxopen.die.AddendumSectionBuilder
Returns the facet density.
FACETED - Static variable in class nxopen.motion.BodyContactRecurdyn.SurfaceType
 
FACETED - Static variable in class nxopen.motion.PackagingInterferenceBuilder.Mode
Interference calculated by Faceted method.
FACETED_BODIES - Static variable in class nxopen.cam.Preferences.BlankSelectionTypes
Deprecated.
Faceted Bodies Region
FACETED_BODIES - Static variable in class nxopen.cam.Preferences.PartSelectionTypes
Deprecated.
Faceted Bodies Region
FACETED_BODIES - Static variable in class nxopen.die.SpringbackCompensationBuilder.DefinedByType
Facted bodies.
FACETED_BODIES - Static variable in class nxopen.DisplayManager.ShowHideType
Show or hide faceted bodies
FACETED_CONTACT - Static variable in class nxopen.uf.UFMotion.ContactMethod
 
facetedBodies() - Method in interface nxopen.Part
Returns the FacetedBodyCollection instance belonging to this part .
facetedBodiesToCombine() - Method in interface nxopen.facet.CombineFacetBodyBuilder
Returns the faceted bodies to combine
License requirements: None.
facetedBodiesToConvert() - Method in interface nxopen.facet.ConvertFacetBodyBuilder
Returns the input bodies to convert
License requirements: None.
FacetedBody - Interface in nxopen.facet
Represents a faceted body.
FacetedBody.FacetedbodyType - Class in nxopen.facet
Body type .
FacetedBodyCollection - Interface in nxopen.facet
Represents a collection of faceted bodies in a part
To obtain an instance of this class, refer to Part

Created in NX5.0.0
FacetedBodyCollection.AssociatedFacetedBodiesData - Class in nxopen.facet
FacetedBodyCollection.CreateFacetBodyData - Class in nxopen.facet
This class holds the data returned from FacetedBodyCollection.createFacetBody(nxopen.Body[])
FacetedBodyCollection.Type - Class in nxopen.facet
Specifies the type of facets created when copying or converting faceted bodies
FacetedBodyData() - Constructor for class nxopen.Body.FacetedBodyData
 
FacetedEdge - Interface in nxopen.facet
Represents a faceted edge.
FacetedEdge.CurveData - Class in nxopen.facet
This class holds the data returned from FacetedEdge.getCurveData()
FacetedEdge.FacetededgeType - Class in nxopen.facet
Facet Edge type .
FacetedEdge.VerticesData - Class in nxopen.facet
This class holds the data returned from FacetedEdge.getVertices()
FacetedFace - Interface in nxopen.facet
Represents a faceted face.
FacetedFace.FacetedfaceType - Class in nxopen.facet
Facet Face type .
FacetedFace.SurfaceData - Class in nxopen.facet
This class holds the data returned from FacetedFace.getSurfaceData()
facetEdgeTol - Variable in class nxopen.uf.UFDisp.SystemParams
 
facetedModels - Variable in class nxopen.uf.UFFacet.AskModelsOfSolidData
 
facetedRepresentation() - Method in interface nxopen.drawings.ViewStyleBaseBuilder
Deprecated.
Deprecated in NX8.5.1. Use Drawings.ViewStyleGeneralBuilder#viewRepresentation instead.
faceThicknesses() - Method in interface nxopen.features.ShellBuilder
Returns the list of faces and corresponding alternate thickness for each.
faceThicknessList() - Method in interface nxopen.features.ShellBuilder
Deprecated.
Deprecated in NX5.0.0. Use ShellBuilder.faceThicknesses() instead.
FacetingParameters - Class in nxopen.facet
The structure of JA faceting parameters
FacetingParameters() - Constructor for class nxopen.facet.FacetingParameters
 
FacetingParameters(int, boolean, double, double, boolean, double, double, double, boolean, boolean, double, boolean, int, boolean, Vector3d, double, boolean, boolean) - Constructor for class nxopen.facet.FacetingParameters
Constructor for the FacetingParameters object.
facetModelingCollection() - Method in interface nxopen.facet.FacetedBodyCollection
Returns the FacetModelingCollection instance belonging to this part .
FacetModelingCollection - Interface in nxopen.facet
Collection of freeform facet operations.
faceToCopy() - Method in interface nxopen.features.CopyFaceBuilder
Returns the face recognition builder holding the faces to copy.
faceToCut() - Method in interface nxopen.features.CutFaceBuilder
Returns the face recognition builder holding the faces to cut.
faceToDeform() - Method in interface nxopen.features.IFormBuilder
Returns the face to deform.
faceToDelete() - Method in interface nxopen.features.subdivision.SubdivisionDeleteFaceBuilder
Deprecated.
Deprecated in NX10.0.0. Use SubdivisionDeleteCageBuilder instead.
faceToDivide() - Method in interface nxopen.tooling.FaceSplitBuilder
Returns the faces to be divided
License requirements: None.
faceToFix() - Method in interface nxopen.features.FixedBuilder
Returns the face recognition builder holding the faces to be fixed.
faceToGroup() - Method in interface nxopen.features.GroupFaceBuilder
Returns the face recognition builder holding the faces to group.
faceToIgnore() - Method in interface nxopen.features.SweptVolumeBuilder
Returns the face to ignore
License requirements: None.
faceToLabel() - Method in interface nxopen.features.LabelNotchBlendBuilder
Returns the face collector.
faceTolerance() - Method in interface nxopen.drawings.ViewStyleShadingBuilder
Returns the face tolerance data on the SHADING tab of the View Style Dialog
License requirements: None.
faceTolerance() - Method in interface nxopen.fields.SpatialMapBuilder
Returns the face tolerance for 3D degenerate surface maps
License requirements: None.
faceTolerance() - Method in interface nxopen.geometricutilities.DisplayResolutionBuilder
Returns the face tolerance
License requirements: None.
faceTolerance - Variable in class nxopen.preferences.PartVisualizationShade.AdvVisViewFacetTolerancesData
 
faceTolerance - Variable in class nxopen.preferences.PartVisualizationShade.ShadedViewFacetTolerancesData
 
faceToMirror() - Method in interface nxopen.features.MirrorFaceBuilder
Returns the face to mirror.
faceToMove() - Method in interface nxopen.features.AdmMoveFaceBuilder
Returns the face to move.
faceToOffset() - Method in interface nxopen.features.AdmOffsetRegionBuilder
Returns the region faces to offset.
faceToPatch() - Method in interface nxopen.tooling.RemoveHolesBuilder
Returns the face to patch
License requirements: None.
faceToProjectTo() - Method in interface nxopen.features.ProjectCurveBuilder
Returns the face to project to
License requirements: None.
faceToPull() - Method in interface nxopen.features.PullFaceBuilder
Returns the face collector.
faceToReblend() - Method in interface nxopen.features.ReplaceBlendBuilder
Returns the face collector.
faceToReplace() - Method in interface nxopen.features.ReplaceFaceBuilder
Returns the target faces to replace, only for replace type, don't use it until nx502
License requirements: None.
faceToResize() - Method in interface nxopen.features.AdmResizeFaceBuilder
Returns the face collector holding the all the recognized blend faces adjacent to faces to resize.
faceToSimplify() - Method in interface nxopen.features.ReplaceFaceBuilder
Returns the face to simplify, only for simplify type, don't use it until nx502
License requirements: None.
facetQuality - Variable in class nxopen.uf.UFDisp.ShadeOptions
 
faceTranslucency() - Method in interface nxopen.tooling.FaceColorManagementBuilder
Returns the face translucency
License requirements: None.
faceTrimMethod() - Method in interface nxopen.routing.FittingOverstockBuilder
Returns the FittingOverstockBuilder.TrimMethod
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Created in NX7.5.0
FACETS - Static variable in class nxopen.DxfdwgCreator.ExportFacesAsOptions
export faces as facets
facetSelection() - Method in interface nxopen.facet.DetectPrimitivesBuilder
Returns the facet selection
License requirements: None.
FacetSettingsBuilder - Interface in nxopen.display
Represents a FacetSettingsBuilder
Facet Settings are not supported in KF.
FacetSettingsBuilder.AdvVisToleranceSetting - Class in nxopen.display
Specifies which set of tolerances are to be used for rendering facets for display for Advanced Visualization views.
FacetSettingsBuilder.FacetScale - Class in nxopen.display
Denotes what type of scaling factor is applied to the corresponding tolerances used to generate facets.
FacetSettingsBuilder.FacetToViewRatio - Class in nxopen.display
Deprecated.
Deprecated in NX9.0.0. Refer to FacetSettingsBuilder.FacetScale instead
FacetSettingsBuilder.FacetUpdate - Class in nxopen.display
Specifies whether an Update Display or Fit operation is to regenerate the facets for only visible objects, for all objects or for no objects.
FacetSettingsBuilder.ShadedToleranceSetting - Class in nxopen.display
Specifies which set of tolerances are to be used for rendering facets for display for Shaded views.
facetSolid(Tag, UFFacet.Parameters) - Method in interface nxopen.uf.UFFacet
Refer to UF_FACET_facet_solid for documentation.
facetsPerTopol - Variable in class nxopen.uf.UFStd.ImportStlAsciiFileData
 
facetsQuality() - Method in interface nxopen.ModelingViewHighQualityImage
Returns the quality of the facets of the High Quality Image.
facetToDeform() - Method in interface nxopen.features.GlobalShapingBuilder
Returns the facet to deform
License requirements: None.
facetTolerance() - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder
Returns the tolerance used for faceting the components
License requirements: None.
facetTolerance() - Method in interface nxopen.sim.SinumerikCaFacetBuilder
Returns the facet tolerance
License requirements: None.
facetTolerance - Variable in class nxopen.uf.UFMotion.StlParameters
 
faceType() - Method in interface nxopen.facet.FacetedFace
Returns the type of the face
License requirements: None.
faceUndercutAreasColor() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
Returns the color for applying to the undercut area faces on the Face Tab page.
faceUndercutEdgesColor() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
Returns the color for applying to the undercut edges on the Face Tab page.
faceVerticalFacesColor() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
Returns the color for applying to the vertical faces on the Face Tab page.
FACTOR - Static variable in class nxopen.cae.LocalRemeshBuilder.Option
Factor
factor - Variable in class nxopen.uf.UFDrf.UdSymbolFontInfo
 
factor - Variable in class nxopen.uf.UFModeling.AskScaleData
 
factor - Variable in class nxopen.uf.UFModlFeatures.AskLocalScaleData
 
factorOfSafety() - Method in interface nxopen.cae.DurabilityEventStrengthSettingsBuilder
Returns the factor of safety.
factorValue() - Method in interface nxopen.cae.LocalRemeshBuilder
Returns the factor value
License requirements: None.
FAHRENHEIT - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.TemperatureUnitsOptions
Use fahrenheit
FAIL - Static variable in class nxopen.die.DieBuildStatusOption
Sub feature build has failed.
FAIL - Static variable in class nxopen.features.shipdesign.ExamineSteelFeatureBuilderResult
No pass
failCode - Variable in class nxopen.uf.UFPs.Unexported
 
FAILED - Static variable in class nxopen.cae.modelcheck.ElementQualityCheckBuilder.OutputElements
Creates OUTPUT group with failed elements
FAILED - Static variable in class nxopen.cae.modelcheck.ElementQualityCheckBuilder.ReportFormat
Only lists check results for elements with error results in the report
FAILED - Static variable in class nxopen.cae.modelcheck.TestValueTypes.Result
indicates the test value violates the error criteria value
FAILED - Static variable in class nxopen.geometricanalysis.GeometricProperties.Status
Failed to find all geometric properties
failed - Variable in class nxopen.uf.UFAssem.UpgradeStatus
 
failed - Variable in class nxopen.uf.UFPart.LoadStatus
 
FAILED - Static variable in class nxopen.validate.OverrideBuilder.ToStates
 
FAILED - Static variable in class nxopen.Validation.Result
Validation Failed
FAILED - Static variable in class nxopen.weld.ConnectionFinderBuilder.FilterTypes
 
FAILED_AND_WARNING - Static variable in class nxopen.cae.modelcheck.ElementQualityCheckBuilder.OutputElements
Creates OUTPUT group with both warning and failed elements
FAILED_AND_WARNING - Static variable in class nxopen.cae.modelcheck.ElementQualityCheckBuilder.ReportFormat
Lists check results for elements with both error and warning results in the report
FAILED_FIND_CLOSEST - Static variable in class nxopen.uf.UFConstants
 
failedElementsColor() - Method in interface nxopen.cae.modelcheck.ElementQualityCheckBuilder
Returns the display color of failed elements
License requirements: None.
FailedObjectsData() - Constructor for class nxopen.weld.WeldAdvisorBuilder.FailedObjectsData
 
failedProfiles - Variable in class nxopen.features.shipdesign.InverseBendingLinesBuilder.FailedProfilesData
The profiles that failed.
FailedProfilesData() - Constructor for class nxopen.features.shipdesign.InverseBendingLinesBuilder.FailedProfilesData
 
failedReasons - Variable in class nxopen.features.shipdesign.InverseBendingLinesBuilder.FailedProfilesData
The error code for each failure.
failGroupName() - Method in interface nxopen.cam.InspectionAlignmentBuilder
Returns the fail group name
License requirements: None.
failingParts - Variable in class nxopen.uf.UFWave.LoadParentsData
 
failingStatuses - Variable in class nxopen.uf.UFWave.LoadParentsData
 
failingWoundEdges - Variable in class nxopen.uf.UFModlFeatures.CreateSimplifyData
 
failingWoundEdges - Variable in class nxopen.uf.UFModlFeatures.EditSimplifyParmsData
 
failingWoundEdges - Variable in class nxopen.uf.UFSf.CreateIdealizeBodyData
 
failingWoundEdges - Variable in class nxopen.uf.UFSf.CreateIdealizeRegionData
 
failingWoundEdges - Variable in class nxopen.uf.UFSf.EditIdealizeParmsData
 
FAILURE - Static variable in class nxopen.features.SketchConversionStatus.Type
Convert to sketch failed
FAILURE - Static variable in class nxopen.RuleManager.InitializationStatusType
Initialization failed
FAILURE_INDEX - Static variable in class nxopen.cae.Result.Quantity
 
failureAction - Variable in class nxopen.uf.UFAssem.Options
 
failureIndex() - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
Returns the failure index.
failureLowerLimit - Variable in class nxopen.optimization.DesignStudyBuilder.DesignStudyObjective
Failure Lower limit
failureUpperLimit - Variable in class nxopen.optimization.DesignStudyBuilder.DesignStudyObjective
Failure Upper limit
FALL_OFF_CONSTANT - Static variable in class nxopen.uf.UFView.LightFallOff
 
FALL_OFF_CONSTANT_INVERSE_LINEAR - Static variable in class nxopen.uf.UFView.LightFallOff
 
FALL_OFF_CONSTANT_INVERSE_SQUARE - Static variable in class nxopen.uf.UFView.LightFallOff
 
FALL_OFF_INVERSE_LINEAR - Static variable in class nxopen.uf.UFView.LightFallOff
 
FALL_OFF_INVERSE_SQUARE - Static variable in class nxopen.uf.UFView.LightFallOff
 
FALLOFF - Static variable in class nxopen.features.StudioXformBuilder.AdvancedMethodType
Deprecated.
Fall off
FALLOFF - Static variable in class nxopen.features.StudioXformBuilderEx.AdvancedMethodType
Deprecated.
Fall off, it is deprecated in NX85 release
fallOff - Variable in class nxopen.uf.UFView.LightAttributes
 
fallOffFactor() - Method in interface nxopen.features.subdivision.TransformCageData
Returns the falloff factor.
fallOffMethod() - Method in interface nxopen.features.subdivision.TransformCageData
Returns the falloff method.
fallOffObjects() - Method in interface nxopen.features.subdivision.TransformCageData
Returns the falloff objects.
fallOffReset() - Method in interface nxopen.features.StudioXformBuilder
Deprecated.
Deprecated in NX8.5.0. Use StudioXformBuilderEx instead.
fallOffReset() - Method in interface nxopen.features.StudioXformBuilderEx
Reset the fall off scale
License requirements: studio_free_form ("STUDIO FREE FORM")
.
fallOffScale() - Method in interface nxopen.features.StudioXformBuilder
Deprecated.
Deprecated in NX8.5.0. Use StudioXformBuilderEx instead.
fallOffScale() - Method in interface nxopen.features.StudioXformBuilderEx
Returns the fall off scale
License requirements: None.
FALSE - Static variable in class nxopen.assemblies.ClearanceSet.ReanalyzeOutOfDateExcludedPairs
 
FALSE - Static variable in class nxopen.assemblies.ComponentAssembly.CloseModified
Close only unmodified parts, not modified parts
FALSE - Static variable in class nxopen.AttributePropertiesBaseBuilder.BooleanValueOptions
False
FALSE - Static variable in class nxopen.AttributeTemplatesBuilder.DefaultBooleanOptions
False
FALSE - Static variable in class nxopen.BasePart.CloseAfterSave
 
FALSE - Static variable in class nxopen.BasePart.CloseWholeTree
 
FALSE - Static variable in class nxopen.BasePart.SaveComponents
 
FALSE - Static variable in class nxopen.cam.OperationCollection.UseDefaultName
don't user the default name
FALSE - Static variable in class nxopen.mechatronics.ProxyOverrideObjectBuilder.AttrBoolValue
 
FALSE - Static variable in class nxopen.options.LevelLockedByDefault
Unlocked
FALSE - Static variable in class nxopen.preferences.RoutingPart.UsePreferredPort
 
FALSE - Static variable in class nxopen.preferences.RoutingPath.AddPointsToSpline
Do not merge duplicate RCPs.
FALSE - Static variable in class nxopen.preferences.RoutingPath.ConfirmBranchSel
Do not confirm branch selection.
FALSE - Static variable in class nxopen.preferences.RoutingPath.ContinueUpdOnError
 
FALSE - Static variable in class nxopen.preferences.RoutingPath.CreateSlopeConstraints
 
FALSE - Static variable in class nxopen.preferences.RoutingPath.CreateSmartRcps
Do not create smart RCPs.
FALSE - Static variable in class nxopen.preferences.RoutingPath.CreateTangency
Do not merge duplicate RCPs.
FALSE - Static variable in class nxopen.preferences.RoutingPath.DisplayObject
 
FALSE - Static variable in class nxopen.preferences.RoutingPath.MergeDupRcps
Do not merge duplicate RCPs.
FALSE - Static variable in class nxopen.preferences.RoutingPath.OccChainable
 
FALSE - Static variable in class nxopen.Sketch.AlternateSolutionOption
Use the regular solution
FALSE - Static variable in class nxopen.Sketch.CreateDimensionOption
Do not create a radius dimension
FALSE - Static variable in class nxopen.Sketch.DeleteThirdCurveOption
Do not delete the 3rd curve
FALSE - Static variable in class nxopen.Sketch.TrimInputOption
Do not trim the input curves
FALSE - Static variable in class nxopen.Sketch.ViewReorient
Do not reorient view to sketch
FALSE - Static variable in class nxopen.tooling.PocketBuilder.RsetType
false
FALSE - Static variable in class nxopen.tooling.StandardPartBuilder.RefsetName
 
FALSE_BODY - Static variable in class nxopen.tooling.ValidCheckBuilder.CheckingType
False body will be used to do checking
falseBody() - Method in interface nxopen.tooling.BendInsertDesignBuilder
Returns the false body creation option.
falseBodyHeight() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
Returns the false body height.
fam() - Method in interface nxopen.UFSession
 
families - Variable in class nxopen.uf.UFPart.AskFamiliesData
 
family() - Method in interface nxopen.partfamily.Instance
Returns the Template of instance.
family() - Method in interface nxopen.partfamily.InstanceSelectionCriteria
Returns the Template that corresponds to this criteria object
License requirements: solid_modeling ("SOLIDS MODELING")

Created in NX9.0.0
family - Variable in class nxopen.uf.UFFam.AskInstanceData
 
family - Variable in class nxopen.uf.UFFam.IntentData
 
FamilyAttribute - Interface in nxopen.partfamily
This class represents a part family attribute
Use PartFamily.TemplateManager#getPartFamilyAttribute to get an instance of this class.
FamilyAttribute.AttrType - Class in nxopen.partfamily
The part family attribute types.
familyCount - Variable in class nxopen.uf.UFPart.AskFamiliesData
 
FamilyData() - Constructor for class nxopen.uf.UFFam.FamilyData
 
FamilyData(int, int, int, Tag[], String) - Constructor for class nxopen.uf.UFFam.FamilyData
 
familyDefaultDirectory() - Method in interface nxopen.SaveOptions
Returns the option that specifies the directory in which you want to file part family members.
FamilyMoldBuilder - Interface in nxopen.tooling
Creates a Mold Wizard Family Mold builder
To create a new instance of this class, use FamilyMoldCollection.createFamilyMoldBuilder()

Created in NX6.0.0
FamilyMoldCollection - Interface in nxopen.tooling
Creates a FamilyMoldCollection
To obtain an instance of this class, refer to ToolingManager

Created in NX6.0.0
familyMolds() - Method in interface nxopen.tooling.ToolingManager
Returns the FamilyMoldCollection instance belonging to this part .
famIntent - Variable in class nxopen.uf.UFAssem.InstanceIntent
 
fanDistance() - Method in interface nxopen.cam.ToolAxisVariable
Returns the fan distance
License requirements: None.
fanDistance() - Method in interface nxopen.cam.ToolPathTiltAvoidance
Returns the fan distance
License requirements: None.
fanDistance() - Method in interface nxopen.cam.ToolPathTiltBuilder
Deprecated.
Deprecated in NX9.0.0. Use ToolPathTiltAvoidance.fanDistance() instead.
FANFOLD_LEGAL_GERMAN - Static variable in class nxopen.PrintBuilder.PaperSize
German Legal Fanfold, 8 - by 13-inches
FANFOLD_STANDARD_GERMAN - Static variable in class nxopen.PrintBuilder.PaperSize
German Std Fanfold, 8 1/2- by 12-inches
FANFOLD_US - Static variable in class nxopen.PrintBuilder.PaperSize
US Std Fanfold, 14 7/8- by 11-inches
FAR_TANTO - Static variable in class nxopen.cam.ToolPositioningBuilder.ToolPositioning
Far Tanto
FAST - Static variable in class nxopen.cae.optimization.TBSTopologyControllerOptimizationParameters.Speed
Fast large step size
FAST - Static variable in class nxopen.cam.SimulationOptionsBuilder.Resolution
use fast resolution
FAST - Static variable in class nxopen.MovieSettingsBuilder.PlaybackSpeedChoices
Specifies fast playback speed (twice record speed)
FAST - Static variable in class nxopen.optimization.OptimizationBuilder.OptimizationConvergenceSpeedType
Fast convergence speed
FAST_ROLLBACK - Static variable in class nxopen.preferences.SessionModeling.SaveDataForFeatureEditOption
Indicates the additional parasolid data is saved for faster rollback
FAST_ROLLBACK_AND_PREVIOUS_STATE_OF_FAILED_FEATURE - Static variable in class nxopen.preferences.SessionModeling.SaveDataForFeatureEditOption
Indicates the additional parasolid data is saved for faster rollback and to show the previous state of failed feature
fastenerAssembly() - Method in interface nxopen.tooling.ToolingManager
Returns the FastenerAssyCollection instance belonging to this part .
fastenerAssemConfig() - Method in interface nxopen.tooling.ToolingManager
Returns the FastenerAssemConfigCollection instance belonging to this part .
FastenerAssemConfigBuilder - Interface in nxopen.tooling
Represents a Fastener Assem Config Collection.
FastenerAssemConfigCollection - Interface in nxopen.tooling
Represents a collection of FastenerAssy
To obtain an instance of this class, refer to ToolingManager

Created in NX5.0.0
FastenerAssy - Interface in nxopen.tooling
Represents a FastenerAssy
To create a new instance of this class, use FastenerAssyCollection.createBuilder()

Created in NX5.0.0
FastenerAssy.HoleOperation - Class in nxopen.tooling
Represents the action on the hole menu of the fastener assembly.
FastenerAssy.ModeMethod - Class in nxopen.tooling
Represents adding and editing modes for the fastener assembly
FastenerAssy.SelectionObjectMethod - Class in nxopen.tooling
Represents selection object type
FastenerAssy.SelectionTypeMethod - Class in nxopen.tooling
Represents selection type for position and hole
FastenerAssy.StackTypeMethod - Class in nxopen.tooling
Represents screw_array type
FastenerAssyCollection - Interface in nxopen.tooling
Represents a collection of FastenerAssy
To obtain an instance of this class, refer to ToolingManager

Created in NX5.0.0
fastenerAssyCustomization() - Method in interface nxopen.tooling.ToolingManager
Returns the FastenerAssyCustomizationCollection instance belonging to this part .
FastenerAssyCustomizationBuilder - Interface in nxopen.tooling
Fastener assembly customization builder.
FastenerAssyCustomizationCollection - Interface in nxopen.tooling
Represents a collection of FastenerAssyCustomizationBuilder
To obtain an instance of this class, refer to ToolingManager

Created in NX8.0.0
fastenerRemoveNode() - Method in interface nxopen.tooling.ToolingManager
Returns the FastenerRemoveNodeCollection instance belonging to this part .
FATIGUE_DAMAGE - Static variable in class nxopen.cae.Result.Quantity
 
FATIGUE_LIFE - Static variable in class nxopen.cae.Result.Quantity
 
FATIGUE_SAFETY_FACTOR - Static variable in class nxopen.cae.Result.Quantity
 
fatigueCollection() - Method in interface nxopen.cae.DurabilityManager
Returns the durability fatigue collection belonging to this sim part.
fatigueCycles - Variable in class nxopen.uf.UFSf.AskDursolNxData
 
fatigueHistoryDataType() - Method in interface nxopen.cae.DurabilityEvaluateFatigueHistoryBuilder
Returns the fatigue history enum
License requirements: None.
fatigueLifeCriterion() - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
Returns the fatigue life criterion.
fatigueLifeCriterion - Variable in class nxopen.uf.UFSf.AskDursolNxData
 
fatigueSafetyFactorKeyin() - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
Returns the fatigue safety factor keyin.
fatigueSafetyFactorMethod() - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
Returns the fatigue safety factor method.
fatigueSafetyFactorOutput() - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
Returns the fatigue safety factor output.
fatigueSafetyFactorToggle() - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
Returns the fatigue safety factor toggle.
faultTags - Variable in class nxopen.uf.UFModeling.AskBodyConsistencyData
 
faultTags - Variable in class nxopen.uf.UFModeling.AskBodyStructuresData
 
faultTags - Variable in class nxopen.uf.UFModeling.AskFaceFaceIntersectData
 
faultToken - Variable in class nxopen.uf.UFModeling.AskFaceSelfIntersectData
 
faultTokens - Variable in class nxopen.uf.UFModeling.AskBodyConsistencyData
 
favoriteIndex() - Method in interface nxopen.ColorDefinition
Returns the favorite index.
favoriteIndex - Variable in class nxopen.uf.UFCgm.Color
 
fbmGeom() - Method in interface nxopen.UFSession
 
Fcf - Interface in nxopen.annotations
Represents an FCF
To create or edit an instance of this class, use PmiFeatureControlFrameBuilder

Created in NX4.0.0
fcf - Variable in class nxopen.uf.UFGdt.AskToleranceFromIndexData
 
fcfAdditionalTextUnderline() - Method in interface nxopen.annotations.SymbolStyleBuilder
Returns the option to underline the additional FCF text
License requirements: None.
FcfCollection - Interface in nxopen.annotations
Represents a collection of Fcf objects
To obtain an instance of this class, refer to AnnotationManager

Created in NX4.0.0
fcfCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
Returns the fcf compare
License requirements: None.
FcfData - Interface in nxopen.annotations
Represents FCF data .
FcfDatumReference - Interface in nxopen.annotations
Represents a FcfDatumReference
Created in NX6.0.0
FcfFrame - Interface in nxopen.annotations
Represents an FCF frame .
FcfFrameData - Interface in nxopen.annotations
Represents FCF frames data .
fcfLeaderTerminatorCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
Returns the fcf leader info compare
License requirements: None.
fcfOriginCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
Returns the fcf origin compare
License requirements: None.
fcfRetainedStatusCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
Returns the fcf retained status compare
License requirements: None.
fcfs() - Method in interface nxopen.annotations.AnnotationManager
Fcf collection .
fcfs - Variable in class nxopen.uf.UFGdt.AskDatumReferencersData
 
fcfs - Variable in class nxopen.uf.UFGdt.AskFcfTagsData
 
fcfTextCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
Returns the fcf text compare
License requirements: None.
FCI - Static variable in class nxopen.geometricutilities.SmartVolumeProfileBuilder.CloseProfileRuleType
Extends the open profile to form the first complete intersection with the target.
FEA_SUMMARY_INFO - Static variable in class nxopen.uf.UFSf.ScenarioInfo
 
feac - Variable in class nxopen.uf.UFModeling.AskHorzDimeData
 
feac - Variable in class nxopen.uf.UFModeling.AskParaDistData
 
feac - Variable in class nxopen.uf.UFModeling.AskPerpDistData
 
feac - Variable in class nxopen.uf.UFModeling.AskVertDimeData
 
feat - Variable in class nxopen.uf.UFModeling.AskUpdateUndoFeatData
 
featCount - Variable in class nxopen.uf.UFModl.Features
 
featDisplayDesPoints() - Method in interface nxopen.cam.InspectionMeasDataBuilder
Returns the option to display design points for a feature
License requirements: None.
featDisplayMeaPoints() - Method in interface nxopen.cam.InspectionMeasDataBuilder
Returns the option to display measured points for a feature
License requirements: None.
featDisplayReconstruct() - Method in interface nxopen.cam.InspectionMeasDataBuilder
Returns the option to display the reconstructed feature
License requirements: None.
featHighlightNominal() - Method in interface nxopen.cam.InspectionMeasDataBuilder
Returns the option to highlight nominal faces for a feature
License requirements: None.
featIfail - Variable in class nxopen.uf.UFModeling.AskUpdateUndoFeatData
 
featTags - Variable in class nxopen.uf.UFModl.Features
 
featType - Variable in class nxopen.uf.UFModl.Features
 
FEATURE - Static variable in class nxopen.AttributePropertiesBaseBuilder.ObjectOptions
Deprecated.
Apply attribute to the feature in the select object list
FEATURE - Static variable in class nxopen.cae.Post.EdgeStyle
 
FEATURE - Static variable in class nxopen.cam.Preferences.SelectionTypes
feature
FEATURE - Static variable in class nxopen.cam.ProbeControlParametersBuilder.PrintType
Increment feature
feature() - Method in interface nxopen.DatumPlane
Returns the feature associated with the datum plane.
feature - Variable in class nxopen.FaceAllBlendRule.DefiningData
Feature which creates this rule
feature - Variable in class nxopen.FaceConnectedBlendRule.DefiningData
Feature which creates this rule
FEATURE - Static variable in class nxopen.features.shipdesign.CopyObjectsBuilder.Type
 
FEATURE - Static variable in class nxopen.features.shipdesign.ManufacturingStockBuilder.ObjectType
Feature
feature() - Method in interface nxopen.features.shipdesign.QualifySketchBuilder
Returns the steel feture type.
feature() - Method in interface nxopen.features.SketchConversionStatus
Returns the feature being converted to independent sketch.
feature() - Method in interface nxopen.features.UserDefinedFeatureEditEvent
Returns the related UDF
License requirements: None.
FEATURE - Static variable in class nxopen.MeasureAngleBuilder.ObjectType
 
feature - Variable in class nxopen.Part.FeatureUpdateStatus
the feature
FEATURE - Static variable in class nxopen.partfamily.FamilyAttribute.AttrType
feature attribute
feature() - Method in interface nxopen.Sketch
Returns the feature associated with this sketch
License requirements: None.
feature - Variable in class nxopen.tooling.AddReusableFeatureCollection.InputData
Reusable feature in edit mode
feature - Variable in class nxopen.uf.UFModeling.AskHorzDimeData
 
feature - Variable in class nxopen.uf.UFModeling.AskParaDistData
 
feature - Variable in class nxopen.uf.UFModeling.AskVertDimeData
 
feature - Variable in class nxopen.uf.UFSmd.SeqInput
 
feature - Variable in class nxopen.uf.UFSmd.SeqOutput
 
feature - Variable in class nxopen.weld.WeldObjectBuilder.FeatureInfo
the newly created or edited feature
feature - Variable in class nxopen.weld.WeldPointExitBuilder.FeatureInfo
the newly created or edited feature
feature1() - Method in interface nxopen.MeasureAngleBuilder
Returns the feature1
License requirements: None.
feature1 - Variable in class nxopen.uf.UFModeling.AskAngleEdgeData
 
feature1 - Variable in class nxopen.uf.UFModeling.AskParaEdgeData
 
feature1 - Variable in class nxopen.uf.UFModeling.AskPerpDistData
 
feature2() - Method in interface nxopen.MeasureAngleBuilder
Returns the feature2
License requirements: None.
feature2 - Variable in class nxopen.uf.UFModeling.AskAngleEdgeData
 
feature2 - Variable in class nxopen.uf.UFModeling.AskParaEdgeData
 
FEATURE_CONTROL_FRAME - Static variable in class nxopen.annotations.PmiFilterByType.Type
Indicates a PMI feature control frame type
FEATURE_CONTROL_FRAME - Static variable in class nxopen.annotations.SearchModelViewBuilder.PmiTypes
feature control frame type
FEATURE_DIMENSION - Static variable in class nxopen.cae.optimization.DAODesignVariableBuilder.Variable
Feature dimension variables
FEATURE_EDGE - Static variable in class nxopen.uf.UFGdt.DatumAssocType
 
FEATURE_GEOM_TYPE - Static variable in class nxopen.uf.UFCam.BlankGeomType
 
FEATURE_INTERSECTION_EDGES - Static variable in class nxopen.SelectionIntentRule.RuleType
See documentation for FeatureIntersectionEdgesRule for more details
FEATURE_OF_SIZE - Static variable in class nxopen.annotations.Dimension.MeasurementTypes
FeatureOfSize
FEATURE_OF_SIZE - Static variable in class nxopen.annotations.SearchCriteriaDimensionBuilder.MeasurementTypes
Linear Feature of Size
FEATURE_POINTS - Static variable in class nxopen.SelectionIntentRule.RuleType
See documentation for FeaturePointsRule for more details
FEATURE_TYPE - Static variable in class nxopen.Part.PartFamilyAttrType
Deprecated.
feature attribute
featureangletolerance - Variable in class nxopen.cae.ElemEdgePathMethod.SeedsData
if preferFeatureElementEdge is true, this is the feature angle tolerance to use
featureArray - Variable in class nxopen.Selection.SelectFeaturesData
The selected features
FeatureBasedGeomBuilder - Interface in nxopen.cam
Represents a FeatureBasedGeom Builder
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createFeatureBasedGeomBuilder

Created in NX5.0.0
featureCanBeCopied(Tag) - Method in interface nxopen.uf.UFModeling
Refer to UF_MODL_feature_can_be_copied for documentation.
FeatureCollection - Interface in nxopen.features
Represents a collection of features
To obtain an instance of this class, refer to Part

Created in NX3.0.0
FeatureCollection.CreateIntersectFeatureData - Class in nxopen.features
FeatureCollection.CreateSubtractFeatureData - Class in nxopen.features
FeatureCollection.CreateUniteFeatureData - Class in nxopen.features
FeatureCollection.ReorderType - Class in nxopen.features
Reorder operation type.
FeatureControlFrameBuilder - Interface in nxopen.annotations
Represents a FeatureControlFrameBuilder
This is an abstract class, and cannot be instantiated.
FeatureControlFrameBuilder.FcfCharacteristic - Class in nxopen.annotations
Specifies the characteristitic of the feature control frame
FeatureControlFrameBuilder.FcfFrameStyle - Class in nxopen.annotations
Specifies whether the feature control frame is a single frame or composite
featureControlFrameData() - Method in interface nxopen.annotations.FeatureControlFrameBuilder
The feature control frame data list
License requirements: None.
FeatureControlFrameData - Interface in nxopen.annotations
Represents a FeatureControlFrameData
Created in NX6.0.0
FeatureControlFrameDataBuilder - Interface in nxopen.annotations
Represents a FeatureControlFrameDataBuilder .
FeatureControlFrameDataBuilder.AreaSymbolType - Class in nxopen.annotations
Specifies the unit type
FeatureControlFrameDataBuilder.ToleranceMaterialModifier - Class in nxopen.annotations
Specifies the tolerance material modifier condition
FeatureControlFrameDataBuilder.ToleranceZoneShape - Class in nxopen.annotations
Specifies the zone shape for the feature control frame
FeatureControlFrameDataBuilderList - Interface in nxopen.annotations
Represents a list of objects.
featureControlFrameDataList() - Method in interface nxopen.annotations.FeatureControlFrameBuilder
Returns the feature control frame data list
License requirements: None.
featureControlFrameTags - Variable in class nxopen.uf.UFGdt.AnnotationTags
 
featureCount - Variable in class nxopen.uf.UFMfm.RecognizeHolesData
 
featureCurves - Variable in class nxopen.uf.UFCurve.AskFeatureCurvesData
 
featureDetail() - Method in interface nxopen.cam.InspectionAnalyzeOutputBuilder
Returns the feature detail option
License requirements: None.
FeatureEdgeNodeMethod - Interface in nxopen.cae
Represents the output from the feature edge node smart selector method
To obtain an instance of this class use CAE::SmartSelectionManager
.
FeatureElemEdgeMethod - Interface in nxopen.cae
Represents the output from the feature element edge smart selector method
To obtain an instance of this class use CAE::SmartSelectionManager
.
FeatureElemFaceMethod - Interface in nxopen.cae
Represents the output from the feature element face smart selector method
To obtain an instance of this class use CAE::SmartSelectionManager
.
FeatureElemMethod - Interface in nxopen.cae
Represents the output from the feature element smart selector method
To obtain an instance of this class use CAE::SmartSelectionManager
.
FeatureExtractionBuilder - Interface in nxopen.facet
Represents a FeatureExtractionBuilder It extracts feature lines or separates regions of different curvature from a facet body based on the curvature map.
FeatureExtractionBuilder.InputActions - Class in nxopen.facet
Specifies how to handle the input facet bodies.
FeatureGeneralPropertiesBuilder - Interface in nxopen
Represents a FeatureGeneralPropertiesBuilder to be used for modifying the names of features and general objects.
FeatureGeomBuilder - Interface in nxopen.cam
Represents a FeatureGeom Builder
This is an abstract class, and cannot be instantiated.
FeatureGeomBuilder.MaterialData - Class in nxopen.cam
This class holds the data returned from FeatureGeomBuilder.getMaterialData()
FeatureGeometry - Interface in nxopen.cam.fbm
Represents a feature geometry builder
This is an abstract class and cannot be instantiated.
FeatureGeometry - Interface in nxopen.cam
Represents a Base Geometry Group
To create or edit an instance of this class, use FeatureGeomBuilder

Created in NX7.5.0
featureGeometry() - Method in interface nxopen.cam.HoleBossGeometry
Returns the sub builder for feature geometry
License requirements: None.
FeatureGeometry.SequenceDirectionType - Class in nxopen.cam.fbm
the direction types .
FeatureGeometry.SequencePatternType - Class in nxopen.cam.fbm
the pattern types .
FeatureGeometry.SortOrder - Class in nxopen.cam.fbm
the optimization types .
featureGrouping() - Method in interface nxopen.cam.FeatureProcessBuilder
Returns the way features are grouped in feature processes
License requirements: ug_holemaking ("UG Holemaking")
.
featureId() - Method in interface nxopen.annotations.FeatureIdBusinessModifierBuilder
Returns the feature ID
License requirements: None.
FeatureIdBusinessModifier - Interface in nxopen.annotations
Represents buiness modifier that indicates a featire identification PMI object.
FeatureIdBusinessModifierBuilder - Interface in nxopen.annotations
FeatureInfo() - Constructor for class nxopen.weld.WeldObjectBuilder.FeatureInfo
 
FeatureInfo(nxopen.features.Feature, boolean) - Constructor for class nxopen.weld.WeldObjectBuilder.FeatureInfo
Constructor for the FeatureInfo object.
FeatureInfo() - Constructor for class nxopen.weld.WeldPointExitBuilder.FeatureInfo
 
FeatureInfo(nxopen.features.Feature, WeldPointExitBuilder.MethodUsed, nxopen.features.Feature, boolean) - Constructor for class nxopen.weld.WeldPointExitBuilder.FeatureInfo
Constructor for the FeatureInfo object.
featureInstances - Variable in class nxopen.uf.UFGdt.AskTolFeatInstanceData
 
FeatureIntersectionEdgesRule - Interface in nxopen
Represents a SelectionIntentRule that collects the intersection edges of boolean like features.
featureIset - Variable in class nxopen.uf.UFAssem.IsetArrayData
 
featureList() - Method in interface nxopen.features.MirrorBuilder
Returns the Features to Mirror
License requirements: solid_modeling ("SOLIDS MODELING")
.
featureList() - Method in interface nxopen.SuppressByExpressionBuilder
Returns the feautre list.
featureMapperEnabled() - Method in interface nxopen.cam.FeatureRecognitionBuilder
Returns the flag indicating if mapping is enabled.
FeatureMilling - Interface in nxopen.cam
Represents a Feature Milling Operation
To create or edit an instance of this class, use FeatureMillingBuilder

Created in NX7.5.0
FeatureMillingBuilder - Interface in nxopen.cam
Represents a FeatureMilling Builder
To create a new instance of this class, use OperationCollection.createFeatureMillingBuilder(nxopen.cam.CAMObject)

Created in NX5.0.0
FeatureMillingCutParameters - Interface in nxopen.cam
Represents a FeatureMillingCutParameters Builder .
FeatureMillingCutParameters.CuttingDirectionTypes - Class in nxopen.cam
cut direction options .
featureMode() - Method in interface nxopen.features.shipdesign.ProfileTransitionBuilder
Returns the feature mode used to create new Profile Transition features.
featureName() - Method in interface nxopen.cam.IpwContainmentCurvesBuilder
Returns the feature name
License requirements: None.
featureName() - Method in interface nxopen.FeatureGeneralPropertiesBuilder
Returns the feature name.
featureName() - Method in interface nxopen.features.shipdesign.ManufacturingPreparationBuilder
Returns the feature name
License requirements: None.
featureName() - Method in interface nxopen.features.shipdesign.SteelDistributionBuilder
Returns the description
License requirements: None.
featureName - Variable in class nxopen.uf.UFSmd.SeqOutput
 
featureName - Variable in class nxopen.uf.UFWave.LinkedFeatureInfo
 
featureNames - Variable in class nxopen.uf.UFFbmGeom.AskListOfFeatureNamesData
 
featureNameSuffix() - Method in interface nxopen.features.shipdesign.TransFrameBuilder
Returns the suffix name.
FeatureNodeMethod - Interface in nxopen.cae
Represents the output from the feature node smart selector method
To obtain an instance of this class use CAE::SmartSelectionManager
.
featureObject() - Method in interface nxopen.FeatureGeneralPropertiesBuilder
Returns the feature.
FeatureOffset - Interface in nxopen.geometricutilities
Represents a Offset .
featureOffsetDistance() - Method in interface nxopen.cam.InspectionMethodBuilder
Returns the offset feature distance
License requirements: None.
featureOpName() - Method in interface nxopen.cam.InspectionPathBuilder
Returns the inspection feature operation name
License requirements: None.
featureOption() - Method in interface nxopen.features.ExtractFaceBuilder
Returns the feature option type
License requirements: None.
featureOption() - Method in interface nxopen.features.MirrorBodyBuilder
Returns the feature option type
License requirements: None.
featureOptions() - Method in interface nxopen.features.ExtrudeBuilder
Returns the feature options
License requirements: None.
featureOptions() - Method in interface nxopen.features.GlobalShapingBuilder
Returns the feature options
License requirements: None.
featureOptions() - Method in interface nxopen.features.RevolveBuilder
Returns the feature options
License requirements: None.
featureOptions() - Method in interface nxopen.features.SweepAlongGuideBuilder
Returns the feature options
License requirements: None.
featureOptions() - Method in interface nxopen.features.VarsweepBuilder
Returns the solid versus sheet body type option
License requirements: None.
FeatureOptions - Interface in nxopen.geometricutilities
Represents various options supported on features.
FeatureOptions.BodyStyle - Class in nxopen.geometricutilities
This enum represents the various body types
FeatureParmsBuilder - Interface in nxopen.features.shipdesign
This class is used to create or edit the information shared among all Ship Design features.
FeatureParmsBuilder.OrientationAngleRuleTypes - Class in nxopen.features.shipdesign
Settings to indicate how angles are to be measured.
featurePatterns - Variable in class nxopen.uf.UFModeling.AskInstancesOfFeatureData
 
FeaturePointsRule - Interface in nxopen
Represents a SelectionIntentRule that collects all points created by a feature.
FeatureProcessBuilder - Interface in nxopen.cam
The Create Feature Process Builder class creates operations and features groups
To create a new instance of this class, use CAMSetup.createFeatureProcessBuilder()
Default values.
FeatureProcessBuilder.CreateFeatureProcessesData - Class in nxopen.cam
This class holds the data returned from FeatureProcessBuilder.createFeatureProcesses(CAMFeature[])
FeatureProcessBuilder.FeatureGroupingType - Class in nxopen.cam
Determines how features are allocated to feature groups
FeatureProcessBuilder.FeatureProcessType - Class in nxopen.cam
Type of creation
FeatureProcessBuilder.RecreateFeatureProcessesData - Class in nxopen.cam
FeatureProcessBuilder.TemplateData - Class in nxopen.cam
This class holds the data returned from FeatureProcessBuilder.getTemplate()
FeatureProcessBuilderStatus - Interface in nxopen
.
FeatureProcessBuilderStatus.ResultStatus - Class in nxopen
Result status enumeration to indicate the result status of feature process creation
featureprocestemplate - Variable in class nxopen.cam.FeatureProcessBuilder.TemplateData
the feature process sub type used
FeatureProperty - Class in nxopen.features.sheetmetal
This is a common enum that comprises of values to be used for various features.
FeatureRecognitionBuilder - Interface in nxopen.cam
Represents a FeatureRecognition Builder
To create a new instance of this class, use CAMSetup.createFeatureRecognitionBuilder(nxopen.cam.CAMObject)

Created in NX6.0.0
FeatureRecognitionBuilder.GeometrySearch - Class in nxopen.cam
the geometry search type
FeatureRecognitionBuilder.RecognitionEnum - Class in nxopen.cam
the type of feature search
featureReferences() - Method in interface nxopen.features.ReferenceMapperBuilder
Returns the Feature References Builder
License requirements: None.
FeatureReferencesBuilder - Interface in nxopen.features
Represents a FeatureReferencesBuilder
Created in NX6.0.0
FeatureReplayBuilder - Interface in nxopen.features
Represents a FeatureReplayBuilder builder.
FEATURES - Static variable in class nxopen.blockstyler.SelectObject.FilterType
Filter to select all feature types
features() - Method in interface nxopen.cam.MachiningFeatureGeom
Returns the features
License requirements: None.
features - Variable in class nxopen.CurveFeatureChainRule.Data
Features whose curves are used to create this rule
features - Variable in class nxopen.CurveFeatureTangentRule.Data
Feaures whose tangent curves are used to create this rule
features - Variable in class nxopen.features.FeatureCollection.CreateIntersectFeatureData
Array of boolean features
features - Variable in class nxopen.features.FeatureCollection.CreateSubtractFeatureData
Array of boolean features
features - Variable in class nxopen.features.FeatureCollection.CreateUniteFeatureData
Array of boolean features
features - Variable in class nxopen.FollowFilletRule.Data
Features whose curves are used to create this rule
features() - Method in interface nxopen.Part
Returns the FeatureCollection instance belonging to this part .
FEATURES - Static variable in class nxopen.Selection.SelectionType
Filter to select all feature types
features - Variable in class nxopen.uf.UFModeling.AskAllMembersOfSetData
 
features - Variable in class nxopen.uf.UFModeling.AskFeaturesOfMirrorSetData
 
features - Variable in class nxopen.uf.UFModeling.AskOutOfDateFeaturesData
 
features - Variable in class nxopen.uf.UFModl.ComparePartEntitiesData
 
features - Variable in class nxopen.uf.UFModl.ComparePartEntitiesData3
 
features - Variable in class nxopen.uf.UFModl.CreateExtrusion1Data
 
features - Variable in class nxopen.uf.UFModl.CreateExtrusion2Data
 
features - Variable in class nxopen.uf.UFModl.CreateExtrusionData
 
features - Variable in class nxopen.uf.UFModl.CreateExtrusionPath1Data
 
features - Variable in class nxopen.uf.UFModl.CreateExtrusionPathData
 
features - Variable in class nxopen.uf.UFModl.CreateRevolution1Data
 
features - Variable in class nxopen.uf.UFModl.CreateRevolutionData
 
features - Variable in class nxopen.uf.UFModl.CreateRevolutionDirData
 
features - Variable in class nxopen.uf.UFModl.CreateTrimmedTube1Data
 
features - Variable in class nxopen.uf.UFModl.CreateTrimmedTubeData
 
Features() - Constructor for class nxopen.uf.UFModl.Features
 
Features(int, Tag[], String) - Constructor for class nxopen.uf.UFModl.Features
 
features - Variable in class nxopen.uf.UFModlGeneral.AskFeaturesOfExpData
 
features - Variable in class nxopen.uf.UFModlGeneral.AskFeaturesOfUdfData
 
FEATURES_IN_BODY - Static variable in class nxopen.Information.DisplayFeatureType
Displays features in body information.
featureSaveMethod() - Method in interface nxopen.features.StudioXformBuilder
Deprecated.
Deprecated in NX8.5.0. Use StudioXformBuilderEx instead.
featureSaveMethod() - Method in interface nxopen.features.StudioXformBuilderEx
Returns the feature save method
License requirements: None.
FeaturesBatchOperationBuilder - Interface in nxopen.features.shipdesign
Use this to cycle through the assembly components and perform the operation globally on the specified feature type.
FeaturesBatchOperationBuilder.Types - Class in nxopen.features.shipdesign
The option for which kind of operation will be performed.
FeatureSet - Interface in nxopen.cam.fbm
Interface for feature set
To create a new instance of this class, use FeatureGeometry.createFeatureSet()

Created in NX9.0.0
featureSet() - Method in interface nxopen.features.EditDimensionBuilder
Returns the list of features
License requirements: None.
featureSetTag - Variable in class nxopen.uf.UFProcessAid.IsDatumObjectData
 
featureSetTag - Variable in class nxopen.uf.UFWeld.IsObjectWeldData
 
FeatureShellElemMethod - Interface in nxopen.cae
Represents the output from the feature shell element smart selector method
To obtain an instance of this class use CAE::SmartSelectionManager
.
featureSpine() - Method in interface nxopen.geometricutilities.AlongSpineBuilder
Returns the Spine set by the owning feature of the law
License requirements: None.
featuresToGroupType() - Method in interface nxopen.cam.GroupFeatures
Returns the features to group enumeration
License requirements: None.
FeaturesToTagBuilder - Interface in nxopen.features.shipdesign
This class is used to add an attribute to profile features that have been modified by the user to display a 'Metal to Metal' design 'feature'.
featureSummary() - Method in interface nxopen.cam.InspectionAnalyzeOutputBuilder
Returns the feature summary option
License requirements: None.
featureSuppression() - Method in interface nxopen.ListCreator
Returns the m_featureSuppression * - Specifies the feature supression for Defined Level of Detail
License requirements: None.
featureTag - Variable in class nxopen.uf.UFGexp.CreateAngleData
 
featureTag - Variable in class nxopen.uf.UFGexp.CreateDistanceData
 
featureTag - Variable in class nxopen.uf.UFGexp.CreateLengthData
 
featureTag - Variable in class nxopen.uf.UFModl.DimensionData
 
featureTag - Variable in class nxopen.uf.UFModlFeatures.CreateSimplifyData
 
featureTag - Variable in class nxopen.uf.UFSf.CreateIdealizeBodyData
 
featureTag - Variable in class nxopen.uf.UFSf.CreateIdealizeRegionData
 
featureTag - Variable in class nxopen.uf.UFSf.IsMidsrfData
 
featureTag - Variable in class nxopen.uf.UFSf.IsUserdefMidsrfData
 
featureTag - Variable in class nxopen.uf.UFSmd.PipNodeData
 
FeatureTeaching - Interface in nxopen.cam
Represents a FeatureTeaching Builder
To create a new instance of this class, use CAMSetup.createFeatureTeaching(nxopen.cam.CAMObject)

Created in NX8.0.0
FeatureTeaching.RuleMatchOptionType - Class in nxopen.cam
Rule Option types
featureToTag() - Method in interface nxopen.features.shipdesign.FeaturesToTagBuilder
Returns the feature to tag.
featureType() - Method in interface nxopen.cam.SurfaceRegions
Returns the feature type
License requirements: None.
featureType() - Method in interface nxopen.features.MeshSurfaceBuilder
Returns
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
featureType - Variable in class nxopen.RuleManager.AdoptableTypes
 
featureTypeNames - Variable in class nxopen.uf.UFMfm.AskMachiningFeatureTypesData
 
FeatureUpdateStatus() - Constructor for class nxopen.Part.FeatureUpdateStatus
 
FeatureUpdateStatus(nxopen.features.Feature, String, String) - Constructor for class nxopen.Part.FeatureUpdateStatus
Constructor for the FeatureUpdateStatus object.
FEB - Static variable in class nxopen.DateItemBuilder.MonthOfYear
 
FEED_PER_TOOTH - Static variable in class nxopen.cam.FeedsBuilder.RecalcuateBasedOn
feed per tooth
FEED_UNIT_LAST_ELEMENT - Static variable in class nxopen.uf.UFPath.FeedUnit
 
FEED_UNIT_NONE - Static variable in class nxopen.uf.UFDrpos.FeedUnit
 
FEED_UNIT_NONE - Static variable in class nxopen.uf.UFPath.FeedUnit
 
FEED_UNIT_PER_MIN - Static variable in class nxopen.uf.UFDrpos.FeedUnit
 
FEED_UNIT_PER_MINUTE - Static variable in class nxopen.uf.UFPath.FeedUnit
 
FEED_UNIT_PER_REV - Static variable in class nxopen.uf.UFDrpos.FeedUnit
 
FEED_UNIT_PER_REVOLUTION - Static variable in class nxopen.uf.UFPath.FeedUnit
 
FEED_USE_CUSTOM - Static variable in class nxopen.uf.UFDrpos.FeedUse
 
FEED_USE_DEFAULT - Static variable in class nxopen.uf.UFDrpos.FeedUse
 
feedApproachBuilder() - Method in interface nxopen.cam.FeedsBuilder
Returns the feed_approach builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedApproachBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
Returns the feed_approach builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedApproachBuilder() - Method in interface nxopen.cam.FeedsWedmBuilder
Returns the feed_approach builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedbackMessage(UFVariant, String, String) - Method in interface nxopen.uf.UFSim
Refer to UF_SIM_feedback_message for documentation.
feedbackPoint() - Method in interface nxopen.mechatronics.AngularLimitJointBuilder
Returns the position of visual feedback point.
feedbackPoint() - Method in interface nxopen.mechatronics.AngularSpringJointBuilder
Returns the position of visual feedback point.
feedbackPoint() - Method in interface nxopen.mechatronics.FixedJointBuilder
Returns the position of visual feedback point.
feedbackPoint() - Method in interface nxopen.mechatronics.SlidingJointBuilder
Returns the position of visual feedback point.
feedCutBuilder() - Method in interface nxopen.cam.DriveChainItemBuilder
Returns the feed rate builder
License requirements: cam_base ("CAM BASE")
.
feedCutBuilder() - Method in interface nxopen.cam.FeedsBuilder
Returns the feed_cut builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedCutBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
Returns the feed_cut builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedCutBuilder() - Method in interface nxopen.cam.FeedsWedmBuilder
Returns the feed_cut builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedDepartureBuilder() - Method in interface nxopen.cam.FeedsBuilder
Returns the feed_departure builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedDepartureBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
Returns the feed_departure builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedDepartureBuilder() - Method in interface nxopen.cam.FeedsWedmBuilder
Returns the feed_departure builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedDisplayFlag() - Method in interface nxopen.cam.DisplayPaint
Returns the feed display flag
License requirements: None.
feedDisplayFlag() - Method in interface nxopen.cam.OperationDisplayOptionsBuilder
Returns the feed display flag
License requirements: None.
feedEngageBuilder() - Method in interface nxopen.cam.FeedsBuilder
Returns the feed_engage builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedEngageBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
Returns the feed_engage builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedEngageBuilder() - Method in interface nxopen.cam.FeedsWedmBuilder
Returns the feed_engage builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedFirstCutBuilder() - Method in interface nxopen.cam.FeedsBuilder
Returns the feed_first_cut builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedFirstCutBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
Returns the feed_first_cut builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedFirstCutBuilder() - Method in interface nxopen.cam.FeedsWedmBuilder
Returns the feed_first_cut builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedIn() - Method in interface nxopen.cam.TurnRoughFinishTestCut
Returns the test cut feed in
License requirements: None.
feedInAngle() - Method in interface nxopen.cam.TurnRoughFinishTestCut
Returns the test cut feed in angle
License requirements: None.
feedInLength() - Method in interface nxopen.cam.TurnRoughFinishTestCut
Returns the test cut feed in length
License requirements: None.
feedMaxApproachLengthBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
Returns the feed_max_approach_length builder (inheritable Double)
License requirements: cam_base ("CAM BASE")
.
feedMaxApproachLengthFlagBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
Returns the feed_max_approach_length_flag builder (inheritable Int)
License requirements: cam_base ("CAM BASE")
.
feedMinAccelerateDecelerateLengthBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
Returns the feed_min_accelerate_decelerate_length builder (inheritable Double)
License requirements: cam_base ("CAM BASE")
.
feedMinAccelerateDecelerateLengthFlagBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
Returns the feed_min_accelerate_decelerate_length_flag builder (inheritable Int)
License requirements: cam_base ("CAM BASE")
.
feedOnShortMoves() - Method in interface nxopen.cam.MaxCutTraverse
Returns the feed on short moves
License requirements: None.
feedOut() - Method in interface nxopen.cam.TurnRoughFinishTestCut
Returns the test cut feed out
License requirements: None.
feedOutAngle() - Method in interface nxopen.cam.TurnRoughFinishTestCut
Returns the test cut feed out angle
License requirements: None.
feedOutLength() - Method in interface nxopen.cam.TurnRoughFinishTestCut
Returns the test cut feed out length
License requirements: None.
feedPerToothBuilder() - Method in interface nxopen.cam.FeedsBuilder
Returns the feed_per_tooth builder (inheritable Double)
License requirements: cam_base ("CAM BASE")
.
feedPerToothBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
Returns the feed_per_tooth builder (inheritable Double)
License requirements: cam_base ("CAM BASE")
.
feedRapidBuilder() - Method in interface nxopen.cam.FeedsBuilder
Returns the feed_rapid builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedRapidBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
Returns the feed_rapid builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedRapidBuilder() - Method in interface nxopen.cam.FeedsWedmBuilder
Returns the feed_rapid builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedRapidOutput() - Method in interface nxopen.cam.FeedsBuilder
Returns the feed rapid output builder (inheritable Enum)
License requirements: cam_base ("CAM BASE")
.
feedRapidOutput() - Method in interface nxopen.cam.FeedsTurnBuilder
Returns the feed rapid output builder (inheritable Enum)
License requirements: cam_base ("CAM BASE")
.
FeedRapidOutputMode - Class in nxopen.cam
The type for rapid feed output mode .
feedRate() - Method in interface nxopen.cam.MoveBuilder
Returns the feed rate
License requirements: None.
FEEDRATE_MODE_LAST_ELEMENT - Static variable in class nxopen.uf.UFPath.FeedrateMode
 
FEEDRATE_OUTPUT_INVERS - Static variable in class nxopen.uf.UFPath.FeedrateMode
 
FEEDRATE_OUTPUT_IPM - Static variable in class nxopen.uf.UFPath.FeedrateMode
 
FEEDRATE_OUTPUT_IPR - Static variable in class nxopen.uf.UFPath.FeedrateMode
 
FEEDRATE_OUTPUT_MMPM - Static variable in class nxopen.uf.UFPath.FeedrateMode
 
FEEDRATE_OUTPUT_MMPR - Static variable in class nxopen.uf.UFPath.FeedrateMode
 
FEEDRATE_OUTPUT_MODE_NONE - Static variable in class nxopen.uf.UFPath.FeedrateMode
 
FEEDRATE_OUTPUT_OFF - Static variable in class nxopen.uf.UFPath.FeedrateMode
 
FEEDRATE_UNIT_NONE - Static variable in class nxopen.uf.UFCam.FeedrateUnit
 
FEEDRATE_UNIT_PER_MINUTE - Static variable in class nxopen.uf.UFCam.FeedrateUnit
 
FEEDRATE_UNIT_PER_REVOLUTION - Static variable in class nxopen.uf.UFCam.FeedrateUnit
 
feedrateAccelerateBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
Returns the feedrate_accelerate builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedrateAccelerateLengthBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
Returns the feedrate_accelerate_length builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedrateCircCcwBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
Returns the feedrate_circ_ccw builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedrateCircCwBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
Returns the feedrate_circ_cw builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedrateCleanupCircCcwBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
Returns the feedrate_cleanup_circ_ccw builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedrateCleanupCircCwBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
Returns the feedrate_cleanup_circ_cw builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedrateCleanupCutBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
Returns the feedrate_cleanup_cut builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedrateCleanupDiameterBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
Returns the feedrate_cleanup_diameter builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedrateCleanupFaceBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
Returns the feedrate_cleanup_face builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedrateCleanupLinearBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
Returns the feedrate_cleanup_linear builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedrateClearBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
Returns the feedrate_clear builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
FeedRateData() - Constructor for class nxopen.cam.CAMObject.FeedRateData
 
feedrateDecelerateBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
Returns the feedrate_decelerate builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedrateDecelerateLengthBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
Returns the feedrate_decelerate_length builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedrateDiameterBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
Returns the feedrate_diameter builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedrateFaceBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
Returns the feedrate_face builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedrateFinishAccelerateBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
Returns the feedrate_finish_accelerate builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedrateFinishAccelerateLengthBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
Returns the feedrate_finish_accelerate_length builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedrateFinishDecelerateBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
Returns the feedrate_finish_decelerate builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedrateFinishDecelerateLengthBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
Returns the feedrate_finish_decelerate_length builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedrateFinishRampInBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
Returns the feedrate_finish_ramp_in builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedrateFinishRampLevelBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
Returns the feedrate_finish_ramp_level builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedrateFinishRampOutBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
Returns the feedrate_finish_ramp_out builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedrateFlag() - Method in interface nxopen.cam.DriveChainItemBuilder
Returns the feed rate flag
License requirements: cam_base ("CAM BASE")
.
feedrateLinearBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
Returns the feedrate_linear builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedrateProfileCutBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
Returns the feedrate_profile_cut builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedrateRampInBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
Returns the feedrate_ramp_in builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedrateRampLevelBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
Returns the feedrate_ramp_level builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedrateRampOutBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
Returns the feedrate_ramp_out builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedRateRange() - Method in interface nxopen.cam.FeedsOptimizationData
Returns the feed rate range
License requirements: None.
feedrateRoughLastCutBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
Returns the feedrate_rough_last_cut builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedrateRoughLastCutForEntirePassTogBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
Returns the feedrate_rough_last_cut_for_entire_pass_tog builder (inheritable Int)
License requirements: cam_base ("CAM BASE")
.
feedratetype - Variable in class nxopen.cam.TurnAvoidancePathPointsBuilder.PointData
the feedrate Type
feedratetype - Variable in class nxopen.cam.TurnAvoidancePathPointsBuilder.PointListData
the feedrate Type
FeedRateUnit - Class in nxopen.cam
The unit of feed rate (please cf.
feedrateUnit - Variable in class nxopen.uf.UFCambnd.AppData
 
feedrateUnit - Variable in class nxopen.uf.UFCamgeom.AppData
 
feedrateValue - Variable in class nxopen.uf.UFCambnd.AppData
 
feedrateValue - Variable in class nxopen.uf.UFCamgeom.AppData
 
feedRetractBuilder() - Method in interface nxopen.cam.FeedsBuilder
Returns the feed_retract builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedRetractBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
Returns the feed_retract builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedRetractBuilder() - Method in interface nxopen.cam.FeedsWedmBuilder
Returns the feed_retract builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedReturnBuilder() - Method in interface nxopen.cam.FeedsBuilder
Returns the feed_return builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedReturnBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
Returns the feed_return builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedReturnBuilder() - Method in interface nxopen.cam.FeedsWedmBuilder
Returns the feed_return builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feeds() - Method in interface nxopen.cam.LaserMethod
Returns the feeds
License requirements: None.
feeds() - Method in interface nxopen.cam.LaserTeachMode
Returns the feeds and speeds
License requirements: None.
feeds() - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder
Returns the feeds builder
License requirements: None.
feedsBuilder() - Method in interface nxopen.cam.DrillMethodBuilder
Returns the feeds builder
License requirements: cam_base ("CAM BASE")
.
FeedsBuilder - Interface in nxopen.cam
Represents a feeds Builder .
feedsBuilder() - Method in interface nxopen.cam.GmcOpBuilder
Returns the feeds and speeds builder
License requirements: None.
feedsBuilder() - Method in interface nxopen.cam.HoleMachiningBuilder
Returns the feeds and speeds builder
License requirements: None.
feedsBuilder() - Method in interface nxopen.cam.HoleMakingBuilder
Returns the feeds and speeds builder
License requirements: None.
feedsBuilder() - Method in interface nxopen.cam.LatheMachineControlBuilder
Returns the feeds and speeds builder
License requirements: cam_base ("CAM BASE")
.
feedsBuilder() - Method in interface nxopen.cam.MillMachineControlBuilder
Returns the feeds and speeds builder
License requirements: cam_base ("CAM BASE")
.
feedsBuilder() - Method in interface nxopen.cam.MillMethodBuilder
Returns the feeds builder
License requirements: cam_base ("CAM BASE")
.
feedsBuilder() - Method in interface nxopen.cam.MillOperationBuilder
Returns the feeds and speeds builder
License requirements: None.
feedsBuilder() - Method in interface nxopen.cam.MillToolProbingBuilder
Returns the feeds and speeds builder
License requirements: None.
feedsBuilder() - Method in interface nxopen.cam.ObjectsFeedsBuilder
Returns the feed builder
License requirements: cam_base ("CAM BASE")
.
feedsBuilder() - Method in interface nxopen.cam.TurningOperationBuilder
Returns the feeds and speeds builder
License requirements: None.
feedsBuilder() - Method in interface nxopen.cam.TurnMethodBuilder
Returns the feeds builder
License requirements: cam_base ("CAM BASE")
.
feedsBuilder() - Method in interface nxopen.cam.TurnPartProbingBuilder
Returns the feeds and speeds builder
License requirements: None.
feedsBuilder() - Method in interface nxopen.cam.TurnToolProbingBuilder
Returns the feeds and speeds builder
License requirements: None.
feedsBuilder() - Method in interface nxopen.cam.WedmMethodBuilder
Returns the feeds builder
License requirements: cam_base ("CAM BASE")
.
FeedsBuilder.RecalcuateBasedOn - Class in nxopen.cam
The recalculation based on attribute .
feedSideCutBuilder() - Method in interface nxopen.cam.FeedsBuilder
Returns the feed_side_cut builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedSideCutBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
Returns the feed_side_cut builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedSideCutBuilder() - Method in interface nxopen.cam.FeedsWedmBuilder
Returns the feed_side_cut builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedsOptimizationData() - Method in interface nxopen.cam.FeedsBuilder
Returns the feeds optimize data
License requirements: cam_base ("CAM BASE")
.
FeedsOptimizationData - Interface in nxopen.cam
Represents a FeedsOptimizationData
Created in NX7.5.0
feedsOptimizationData() - Method in interface nxopen.cam.FeedsOptimizeBuilder
Returns the feeds optimization data
License requirements: cam_base ("CAM BASE")
.
FeedsOptimizationData.FeedRateRangeType - Class in nxopen.cam
The Feed Rate Range options
FeedsOptimizeBuilder - Interface in nxopen.cam
Represents a FeedsOptimizeBuilder a "commit" of this object will perform the Feed Rate Optimization.
FeedStatusData - Class in nxopen.cam
The data for CamUI_FeedStatusComp .
FeedStatusData() - Constructor for class nxopen.cam.FeedStatusData
 
FeedStatusData(double, FeedRateUnit, Inheritance) - Constructor for class nxopen.cam.FeedStatusData
Constructor for the FeedStatusData object.
feedStepoverBuilder() - Method in interface nxopen.cam.FeedsBuilder
Returns the feed_stepover builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedStepoverBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
Returns the feed_stepover builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedStepoverBuilder() - Method in interface nxopen.cam.FeedsWedmBuilder
Returns the feed_stepover builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
FeedsTurnBuilder - Interface in nxopen.cam
Represents a turning feeds Builder .
FeedsWedmBuilder - Interface in nxopen.cam
Represents a wedm feeds Builder .
feedTraversalBuilder() - Method in interface nxopen.cam.FeedsBuilder
Returns the feed_traversal builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedTraversalBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
Returns the feed_traversal builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedTraversalBuilder() - Method in interface nxopen.cam.FeedsWedmBuilder
Returns the feed_traversal builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
feedType() - Method in interface nxopen.cam.MoveBuilder
Returns the feed type
License requirements: None.
feedUnit() - Method in interface nxopen.cam.BoundaryMillingMemberSet
Returns the feed rate unit
License requirements: None.
feedUnit() - Method in interface nxopen.cam.BoundaryMillingSet
Returns the feed rate unit
License requirements: None.
feedUnit() - Method in interface nxopen.cam.BoundaryTurnMemberCorner
Returns the feed rate unit
License requirements: None.
feedUnit() - Method in interface nxopen.cam.BoundaryTurnMemberFeed
Returns the feed rate unit
License requirements: None.
feedUnit() - Method in interface nxopen.cam.BoundaryTurnSet
Returns the feed rate unit
License requirements: None.
feedUnit() - Method in interface nxopen.cam.GeometrySet
Returns the feed rate unit
License requirements: None.
feedUnit() - Method in interface nxopen.cam.MoveBuilder
Returns the feed unit
License requirements: None.
feedUnit() - Method in interface nxopen.cam.SurfaceDriveGeometrySet
Returns the feed rate unit
License requirements: None.
feedUnit - Variable in class nxopen.uf.UFPath.CircularMotion
 
feedUnit - Variable in class nxopen.uf.UFPath.HelicalMotion
 
feedUnit - Variable in class nxopen.uf.UFPath.LinearMotion
 
feedValue() - Method in interface nxopen.cam.BoundaryMillingMemberSet
Returns the feed rate value
License requirements: None.
feedValue() - Method in interface nxopen.cam.BoundaryMillingSet
Returns the feed rate value
License requirements: None.
feedValue() - Method in interface nxopen.cam.BoundaryTurnMemberCorner
Returns the feed rate value
License requirements: None.
feedValue() - Method in interface nxopen.cam.BoundaryTurnMemberFeed
Returns the feed rate value
License requirements: None.
feedValue() - Method in interface nxopen.cam.BoundaryTurnSet
Returns the feed rate value
License requirements: None.
feedValue() - Method in interface nxopen.cam.GeometrySet
Returns the feed rate value
License requirements: None.
feedValue() - Method in interface nxopen.cam.SurfaceDriveGeometrySet
Returns the feed rate value
License requirements: None.
feedValue - Variable in class nxopen.uf.UFPath.CircularMotion
 
feedValue - Variable in class nxopen.uf.UFPath.HelicalMotion
 
feedValue - Variable in class nxopen.uf.UFPath.LinearMotion
 
FEElemEdge - Interface in nxopen.cae
Represents a Finite Element Edge.
FEElement - Interface in nxopen.cae
Represents a Finite Element.
FEElementLabelMap - Interface in nxopen.cae
Represents a Elementl Label to an CAE.FEElement map, it can be used to quickly convert a CAE.FEElement label, which is generally used in solver input files and results files, in the element object itself CAE.FEElement
This is an abstract class

Created in NX6.0.2
feelementLabelMap() - Method in interface nxopen.cae.IFEModel
Returns a CAE.FEElement Label to CAE.FEElement Map for this Interface to the Finite Element Model.
FEElemFace - Interface in nxopen.cae
Represents a Finite Element Face.
FEET - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.LinearUnitsOptions
Use feat
feetInchFractionForDimensionGreaterThan() - Method in interface nxopen.drafting.AutomationPreferencesBuilder
Returns the feet inch fraction for dimension greater than
License requirements: None.
FEM - Static variable in class nxopen.pdm.CaeCloneManager.CloneOption
Deprecated.
 
FEM_IDEALIZED_TYPE - Static variable in class nxopen.tooling.ToolingCloneparttype
CAE Idealized part for .fem
FEM_PART_NEW_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
 
FEM_PART_OPEN_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
 
FEM_SAVEAS_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
 
FEM_TYPE - Static variable in class nxopen.tooling.ToolingCloneparttype
CAE .fem part
FEM_VALUE_ACTION - Static variable in class nxopen.uf.UFSf.FemValueType
 
FEM_VALUE_ALTREP_ARRAY_REF - Static variable in class nxopen.uf.UFSf.FemValueType
 
FEM_VALUE_AXIS_VAL_TYPE - Static variable in class nxopen.uf.UFSf.FemValueType
 
FEM_VALUE_BNDCOND - Static variable in class nxopen.uf.UFSf.FemValueType
 
FEM_VALUE_BOOL - Static variable in class nxopen.uf.UFSf.FemValueType
 
FEM_VALUE_CATALOG - Static variable in class nxopen.uf.UFSf.FemValueType
 
FEM_VALUE_COORD - Static variable in class nxopen.uf.UFSf.FemValueType
 
FEM_VALUE_DIRPATH_VAL_TYPE - Static variable in class nxopen.uf.UFSf.FemValueType
 
FEM_VALUE_DOF_VAL_TYPE - Static variable in class nxopen.uf.UFSf.FemValueType
 
FEM_VALUE_DOFSET_REF - Static variable in class nxopen.uf.UFSf.FemValueType
 
FEM_VALUE_EDGES_ON_FACE - Static variable in class nxopen.uf.UFSf.FemValueType
 
FEM_VALUE_ENUM - Static variable in class nxopen.uf.UFSf.FemValueType
 
FEM_VALUE_EXT_MENU - Static variable in class nxopen.uf.UFSf.FemValueType
 
FEM_VALUE_FIELD_VAL_TYPE - Static variable in class nxopen.uf.UFSf.FemValueType
 
FEM_VALUE_FILENAME_VAL_TYPE - Static variable in class nxopen.uf.UFSf.FemValueType
 
FEM_VALUE_GENERAL_FIELD - Static variable in class nxopen.uf.UFSf.FemValueType
 
FEM_VALUE_GROUPREF - Static variable in class nxopen.uf.UFSf.FemValueType
 
FEM_VALUE_INT - Static variable in class nxopen.uf.UFSf.FemValueType
 
FEM_VALUE_INT_ARRAY - Static variable in class nxopen.uf.UFSf.FemValueType
 
FEM_VALUE_LBCREF - Static variable in class nxopen.uf.UFSf.FemValueType
 
FEM_VALUE_LOAD - Static variable in class nxopen.uf.UFSf.FemValueType
 
FEM_VALUE_MATERIAL - Static variable in class nxopen.uf.UFSf.FemValueType
 
FEM_VALUE_MATRIX - Static variable in class nxopen.uf.UFSf.FemValueType
 
FEM_VALUE_MULTI_STRING - Static variable in class nxopen.uf.UFSf.FemValueType
 
FEM_VALUE_MULTI_STRING_ITI - Static variable in class nxopen.uf.UFSf.FemValueType
 
FEM_VALUE_NIL - Static variable in class nxopen.uf.UFSf.FemValueType
 
FEM_VALUE_PLYMAT_VAL_TYPE - Static variable in class nxopen.uf.UFSf.FemValueType
 
FEM_VALUE_POINT_VAL_TYPE - Static variable in class nxopen.uf.UFSf.FemValueType
 
FEM_VALUE_PPT_ARRAY - Static variable in class nxopen.uf.UFSf.FemValueType
 
FEM_VALUE_PPT_VAL_TYPE - Static variable in class nxopen.uf.UFSf.FemValueType
 
FEM_VALUE_REGION - Static variable in class nxopen.uf.UFSf.FemValueType
 
FEM_VALUE_SCALAR - Static variable in class nxopen.uf.UFSf.FemValueType
 
FEM_VALUE_SCALAR_ARRAY - Static variable in class nxopen.uf.UFSf.FemValueType
 
FEM_VALUE_SCALAR_FIELD - Static variable in class nxopen.uf.UFSf.FemValueType
 
FEM_VALUE_SECTION - Static variable in class nxopen.uf.UFSf.FemValueType
 
FEM_VALUE_SECTION_OFFSET - Static variable in class nxopen.uf.UFSf.FemValueType
 
FEM_VALUE_SECTION_ORIENT - Static variable in class nxopen.uf.UFSf.FemValueType
 
FEM_VALUE_SECTION_REF - Static variable in class nxopen.uf.UFSf.FemValueType
 
FEM_VALUE_SELECTREF - Static variable in class nxopen.uf.UFSf.FemValueType
 
FEM_VALUE_SOLUTIONREF - Static variable in class nxopen.uf.UFSf.FemValueType
 
FEM_VALUE_SSMO_ARRAY - Static variable in class nxopen.uf.UFSf.FemValueType
 
FEM_VALUE_SSMO_VAL_TYPE - Static variable in class nxopen.uf.UFSf.FemValueType
 
FEM_VALUE_TABLE - Static variable in class nxopen.uf.UFSf.FemValueType
 
FEM_VALUE_TARGETSET - Static variable in class nxopen.uf.UFSf.FemValueType
 
FEM_VALUE_TEXT - Static variable in class nxopen.uf.UFSf.FemValueType
 
FEM_VALUE_TIME - Static variable in class nxopen.uf.UFSf.FemValueType
 
FEM_VALUE_VECTOR - Static variable in class nxopen.uf.UFSf.FemValueType
 
FEM_VALUE_VECTOR_FIELD - Static variable in class nxopen.uf.UFSf.FemValueType
 
FEMALE - Static variable in class nxopen.HumanData.GenderType
 
femaleDepthType() - Method in interface nxopen.die.DrawBeadBuilder
Returns the method used to calculate the female depth.
femaleDepthValue() - Method in interface nxopen.die.DrawBeadBuilder
Returns the expression containing the female depth value.
femaleFaceAttribute() - Method in interface nxopen.die.DrawBeadBuilder
Returns the attribute definition to be applied to the faces of the female bead sheet body.
femaleLeftRadius() - Method in interface nxopen.die.DrawBeadSegmentBuilder
Returns the expression containing the female left radius value.
femaleRightRadius() - Method in interface nxopen.die.DrawBeadSegmentBuilder
Returns the expression containing the female right radius value.
femaleSheetAttribute() - Method in interface nxopen.die.DrawBeadBuilder
Returns the attribute definition to be applied to the female bead sheet body.
femaleWidthType() - Method in interface nxopen.die.DrawBeadBuilder
Returns the method used to calculate the female width.
femaleWidthValue() - Method in interface nxopen.die.DrawBeadBuilder
Returns the expression containing the female width value.
femAskCadPart(Tag) - Method in interface nxopen.uf.UFSf
Refer to UF_SF_fem_ask_cad_part for documentation.
femGeometrySaveOption() - Method in interface nxopen.cae.responsesimulation.RSEventOutputSetting
Returns the option to save FEM information with evaluation results.
femObjectPrependName - Variable in class nxopen.cae.FEModel.IdSpecificationObject
String to prepend to fem object names such as element collector, material and section
FEModel - Interface in nxopen.cae
This class represents a Finite Element Model.
femodel() - Method in interface nxopen.cae.SimSimulation
Returns the femodeloccurrence FEModelOccurrence assoicated with the simulation object
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Created in NX5.0.0
FEModel.IdSpecificationObject - Class in nxopen.cae
Structure to specify the Node, Element, and Physical property table start ids and offsets for use in CAE.FEModel#appendFemodel
FEModelOccAttribute - Interface in nxopen.cae
This class represents an Interface to the Finite Element Model Attributes.
FEModelOccAttribute.AltRepDisplayStyle - Class in nxopen.cae
Represents the display style when in alt rep
FEModelOccAttribute.RepType - Class in nxopen.cae
Represents the FemOcc representation type
FEModelOccurrence - Interface in nxopen.cae
This class represents a Finite Element Model Occurrence.
FEModelOccurrence.LabelOffsetsData - Class in nxopen.cae
This class holds the data returned from FEModelOccurrence.getLabelOffsets()
FemPart - Interface in nxopen.cae
Represents an NX part of type .fem.
femPart() - Method in interface nxopen.cae.SimPart
Returns the fem part associated with the sim part
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
FemPart.GeometryData - Class in nxopen.cae
This class holds the data returned from FemPart.getGeometryData()
FemPart.MeshPreferencesData - Class in nxopen.cae
This class holds the data returned from FemPart.getMeshPreferences()
FemPart.UseBodiesOption - Class in nxopen.cae
Used to specify the option of specifying bodies to use from the CAD Part while creating the FEMMain object.
FemSynchronizeOptions - Interface in nxopen.cae
Represents the synchronize options to be used when a FEM part is created These options will be used to synchronize the specified entities from the master CAD part file to the FEM part file
To create a new instance of this class, use FemPart.newFemSynchronizeOptions()

Created in NX4.0.0
FENodeLabelMap - Interface in nxopen.cae
Represents a Nodel Label to an CAE.FENode map, it can be used to quickly convert a CAE.FENode label, which is generally used in solver input files and results files, in the node object itself CAE.FENode
This is an abstract class

Created in NX6.0.2
fenodeLabelMap() - Method in interface nxopen.cae.IFEModel
Returns a CAE.FENode Label to CAE.FENode Map for this Interface to the Finite Element Model.
ffound - Variable in class nxopen.cae.ThicknessBuilder.ElementThicknessData
Element result status:found or not found
ffound - Variable in class nxopen.cae.ThicknessBuilder.NodeThicknessData
Node result status:found or not found
FftFrequencyData() - Constructor for class nxopen.cae.AfuDataConvertor.FftFrequencyData
 
FftTimeData() - Constructor for class nxopen.cae.AfuDataConvertor.FftTimeData
 
fh1Left() - Method in interface nxopen.features.vehicledesign.HeadImpactFrontHeaderDetailBuilder
Returns the left FH1 alternative point.
fh1LeftFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactFrontHeaderDetailBuilder
Returns the left FH1 alternative point flag.
fh1Offset() - Method in interface nxopen.features.vehicledesign.HeadImpactFrontHeaderDetailBuilder
Returns the offset used to position FH1.
fh1Right() - Method in interface nxopen.features.vehicledesign.HeadImpactFrontHeaderDetailBuilder
Returns the right FH1 alternative point.
fh1RightFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactFrontHeaderDetailBuilder
Returns the right FH1 alternative point flag.
fh2Left() - Method in interface nxopen.features.vehicledesign.HeadImpactFrontHeaderDetailBuilder
Returns the left FH2 alternative point.
fh2LeftFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactFrontHeaderDetailBuilder
Returns the left FH2 alternative point flag.
fh2Offset() - Method in interface nxopen.features.vehicledesign.HeadImpactFrontHeaderDetailBuilder
Returns the offset used to position FH2.
fh2Right() - Method in interface nxopen.features.vehicledesign.HeadImpactFrontHeaderDetailBuilder
Returns the right FH2 alternative point.
fh2RightFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactFrontHeaderDetailBuilder
Returns the right FH2 alternative point flag.
FIBER_SIM - Static variable in class nxopen.cae.LaminateImportedLayupBuilder.ApiTypeEnum
FiberSIM layup XML file.
FIBER_SIM_H5 - Static variable in class nxopen.cae.LaminateImportedLayupBuilder.FileEnum
FiberSIM layup HDF5 file.
FIBER_SIM_PART - Static variable in class nxopen.cae.LaminateImportedLayupBuilder.FileEnum
Use the FiberSim data in the current part
FIBER_SIM_XML - Static variable in class nxopen.cae.LaminateImportedLayupBuilder.FileEnum
FiberSIM layup XML file.
fiberDistance() - Method in interface nxopen.cae.LaminateLayupOffsetBuilder
Deprecated.
Deprecated in NX10.0.0. Use LaminateLayupOffsetBuilder.refPlanePosition() instead.
fiberOrientationOptions() - Method in interface nxopen.cae.LaminateGlobalLayup
Returns the fiber orientation options
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
field() - Method in interface nxopen.cae.NodeTranslateBuilder
Returns the scale factor
License requirements: None.
Field - Interface in nxopen.fields
Represents an Field abstract class.
FieldDomain - Interface in nxopen.fields
Represents the Field Domains.
FieldDomainCollection - Interface in nxopen.fields
Provides methods for manipulating the field domains
To obtain an instance of this class, refer to FieldManager

Created in NX4.0.0
FieldEvaluator - Interface in nxopen.fields
Represents a Field Evaluator which can be used to evaluate a Field .
FieldEvaluator.InterpolationEnum - Class in nxopen.fields
Interpolation type
FieldEvaluator.InverseDistanceWeightingEnum - Class in nxopen.fields
Options for IDW (inverse weighted distance) interpolator
FieldEvaluator.LinearLogOptionEnum - Class in nxopen.fields
Log Options for Linear interpolator
FieldEvaluator.ValuesOutsideTableInterpolationEnum - Class in nxopen.fields
Options for outside table values interpolation
FieldExpression - Interface in nxopen.fields
Represents the Field Expression class.
fieldFlag - Variable in class nxopen.uf.UFDrf.WeldSymbols
 
FieldFormat() - Constructor for class nxopen.uf.UFPlist.FieldFormat
 
FieldFormat(int, String, String, int, int, int) - Constructor for class nxopen.uf.UFPlist.FieldFormat
 
FieldFormula - Interface in nxopen.fields
Represents the Field Formula class.
FieldLink - Interface in nxopen.fields
Represents the Field Link class.
fieldManager() - Method in interface nxopen.BasePart
Returns the field main.
FieldManager - Interface in nxopen.fields
Represents the manager class of the Fields
This manager class gives access to all the fields Field within a part, as well as the collection of domains FieldDomain .
fieldOfViewAngle() - Method in interface nxopen.display.CameraBuilder
Returns the field of view angle
License requirements: None.
fieldOfViewMeasured() - Method in interface nxopen.display.CameraBuilder
Returns the field of view measured
License requirements: None.
FieldReference - Interface in nxopen.fields
Represents an reference field
A Reference Field exposes data inside of an abstract data store.
FieldVariable - Interface in nxopen.fields
Represents the Field Variables
A variable is a symbol on whose value a function, polynomial, etc., depends.
FieldVariable.Bounds - Class in nxopen.fields
Variable Bounds structure
FieldVariable.Type - Class in nxopen.fields
Variable Types
FieldVariable.ValueType - Class in nxopen.fields
Variable value Type
fieldWeld() - Method in interface nxopen.annotations.LineWeldBuilder
Returns the field indicating the weld is done at the field site
License requirements: None.
fieldWeld() - Method in interface nxopen.annotations.LineWeldData
Returns the flag indicating whether the weld is done at the field site
License requirements: None.
fieldWeld() - Method in interface nxopen.weld.FilletBuilder
Returns the field weld.
fieldWeld() - Method in interface nxopen.weld.PlugSlotBuilder
Returns the field weld
License requirements: None.
FieldWrapper - Interface in nxopen.fields
This class defines a value that is internally backed up by a field.
FIFTH - Static variable in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Wad
Fifth wrap around distance line.
FIFTH - Static variable in class nxopen.tooling.AutoDimensionBuilder.TextFontType
 
FIFTH - Static variable in class nxopen.tooling.BlankLayoutBuilder.SnapSizeOption
the snap size is 0.2
FIFTH - Static variable in class nxopen.weld.WeldGroupIdColor
Fifth Group Id Color Index
fifthObject() - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder
Returns the fifth selected object.
figureFile() - Method in interface nxopen.HumanData
Returns the human figure file used to create the human feature
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
FILE - Static variable in class nxopen.annotations.ImportAutocadBlockBuilder.FileFolder
File Selection mode
FILE - Static variable in class nxopen.annotations.ImportSymbolBuilder.FileFolder
File Selection mode
FILE - Static variable in class nxopen.blockstyler.PropertyList.PropertyType
File
FILE - Static variable in class nxopen.cae.WeldBuilder.WeldLocation
Creates a weld at locations specified in an input file
FILE - Static variable in class nxopen.features.shipdesign.PlateStockBuilder.ThicknessSourceOptions
The thickness is defined by a table of standard thicknesses for different material and material grades in CSV file.
FILE - Static variable in class nxopen.gateway.ImageCaptureBuilder.CaptureMethodType
the input from file
file() - Method in interface nxopen.gateway.ImageCaptureBuilder
Returns the file
License requirements: None.
FILE - Static variable in class nxopen.ListingWindow.DeviceType
Output is written to a file instead of the Information window
File - Interface in nxopen.markup
Represents a nxopen.Markup.File
To create a new instance of this class, use nxopen.Markup.MarkupFileCollection#createFile

Created in NX10.0.0
NX_REMOVE_FROM_JAVA_API
FILE - Static variable in class nxopen.PropertyContainer.PropertyType
File
FILE_AND_WINDOW - Static variable in class nxopen.ListingWindow.DeviceType
Output is written to a file and to the Information window
FILE_BROWSER - Static variable in class nxopen.CGMBuilder.ActionOption
Option allows for export of CGM file to local location when running Teamcenter
FILE_COULD_NOT_BE_OPENED - Static variable in class nxopen.uf.UFConstants
 
FILE_DOES_NOT_EXIST - Static variable in class nxopen.uf.UFConstants
 
FILE_GRIP_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
 
FILE_NAME - Static variable in class nxopen.preferences.RoutingElectrical.ComponentMatchType
Match file name during component assignment.
FILE_NAME - Static variable in class nxopen.preferences.SessionAssemblies.PartNameOption
 
FILE_OPERATION_REASON - Static variable in class nxopen.uistyler.StylerEvent.Reason
File operation reason
FILE_UFUN_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
 
fileBrowser() - Method in interface nxopen.features.MapleBuilder
Returns the file name returned by the Browser
License requirements: None.
fileBrowser() - Method in interface nxopen.features.shipdesign.UpdateShipLibraryBuilder
Returns the file browser
License requirements: None.
fileCount - Variable in class nxopen.uf.UFUgmgr.AskDependentFilesData
 
fileCount - Variable in class nxopen.uf.UFUgmgr.ListPartRevFilesData
 
fileData - Variable in class nxopen.uf.UFTag.DecomposeHandleData
 
fileexist - Variable in class nxopen.annotations.DraftingImage.ExportFileData
 
fileExists(String) - Method in interface nxopen.RemoteUtilities
Tests to see that a file exists
License requirements: None.
fileFormat() - Method in interface nxopen.display.SaveImageFileBrowserBuilder
Returns the Ray Traced Studio static image file format
License requirements: None.
fileFormat() - Method in interface nxopen.STLImporter
Returns the file format.
FileManagement - Interface in nxopen.pdm
This class is responsible for Teamcenter file management related activities.
FileManagement.ExportFilesData - Class in nxopen.pdm
filename - Variable in class nxopen.annotations.DraftingImage.ExportFileData
 
fileName() - Method in interface nxopen.cae.AfuData
Returns the name of AFU file
License requirements: nx_ftk ("NX Advanced Graphing")
.
filename() - Method in interface nxopen.cae.FlatPatternsBuilder
Returns the string0
License requirements: None.
fileName() - Method in interface nxopen.cae.LaminateImportedLayupBuilder
Returns the full name and path of the file to be imported
License requirements: None.
filename() - Method in interface nxopen.cae.LaminateImportZonesBuilder
Returns the full name and path of the file to be imported
License requirements: None.
fileName() - Method in interface nxopen.features.subdivision.ImportSubdivisionGeometryBuilder
Returns the file name.
fileName() - Method in interface nxopen.geometricutilities.PointsFromFileBuilder
Returns the file name of the point data file
License requirements: None.
fileName() - Method in interface nxopen.Importer
Returns the name of the file containing the data to import.
fileName() - Method in interface nxopen.LogFile
Returns the name of the system log file
License requirements: None.
filename() - Method in interface nxopen.preferences.RoutingApplicationView
Returns the filename of the current application view.
filename() - Method in interface nxopen.PrintPDFBuilder
Returns the filename to be used upon creation of the PDF document.
filename() - Method in interface nxopen.routing.WatertightFittingsBuilder
Returns the name of new part file containing watertight fittings assembly which includes the full path.
fileName - Variable in class nxopen.uf.UFPatt.AskData
 
filename - Variable in class nxopen.uf.UFRoute.AppViewDesc
 
fileName - Variable in class nxopen.uf.UFUi.AskCreatePartFilenameData
 
fileName - Variable in class nxopen.uf.UFUi.AskOpenPartFilenameData
 
filename - Variable in class nxopen.uf.UFUi.CreateFileboxData
 
filename - Variable in class nxopen.uf.UFUi.CreateFileboxWithMultipleFiltersData
 
filename - Variable in class nxopen.uf.UFUi.SelectTcResultFileToImportData
 
filename - Variable in class nxopen.uf.UFUi.UgmgrAskCreatePartFileNameData
 
fileNameForDisplay(String) - Method in interface nxopen.uf.UFPart
Refer to UF_PART_file_name_for_display for documentation.
fileNames - Variable in class nxopen.uf.UFPart.LoadStatus
 
fileNames - Variable in class nxopen.uf.UFUgmgr.AskDependentFilesData
 
fileNames - Variable in class nxopen.uf.UFUgmgr.ListPartRevFilesData
 
FileNew - Interface in nxopen
Represents a FileNew
This class is not directly created.
fileNew() - Method in interface nxopen.PartCollection
Creates a FileNew
License requirements: None.
FileNewApplication - Class in nxopen
Deprecated.
Deprecated in NX9.0.0. Use FileNew.getApplicationNames() that returns all application names.
fileNewDescriptor() - Method in interface nxopen.assemblies.DesignElementBuilder
Returns the file new descriptor to identify a design element
License requirements: None.
FileNewTemplateType - Class in nxopen
Enumeration used for templates to determine the type of the template.
FILEOP_REASON - Static variable in class nxopen.uistyler.StylerEvent.Reason
File operation reason
fileOpenFlag() - Method in interface nxopen.Catiav4Importer
Returns the file open flag - should be set to false if doing file import
License requirements: None.
fileOpenFlag() - Method in interface nxopen.Catiav5Importer
Returns the file open flag - should be set to false if doing file import
License requirements: None.
fileOpenFlag() - Method in interface nxopen.DxfdwgImporter
Returns the FileOpenFlag command - should be set to false if doing file import
License requirements: None.
fileOpenFlag() - Method in interface nxopen.IgesImporter
Returns the file open flag - set this to false if doing file import
License requirements: None.
fileOpenFlag() - Method in interface nxopen.Step203Importer
Returns the file open flag - set this to false if doing file import
License requirements: None.
fileOpenFlag() - Method in interface nxopen.Step214Importer
Returns the file open flag - set this to false if doing file import
License requirements: None.
fileOperation(StylerEvent) - Method in interface nxopen.uistyler.DialogItem.FileOperation
Called just before a dialog user selects a file operation, such as in File?
fileOperationData() - Method in interface nxopen.uistyler.DialogItem
Returns the file operation data
License requirements: None.
FileOperationData - Interface in nxopen.uistyler
Represents a FileOperationData for UI Styler .
FileOperationData.FileOperationState - Class in nxopen.uistyler
Describes file state
FileOperationData.FileOperationType - Class in nxopen.uistyler
Describes file operation
filePicker() - Method in interface nxopen.mechatronics.PreferencesBuilder
Returns the export timing chart file path
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
fileSaveFlag() - Method in interface nxopen.Catiav4Creator
Returns the file save flag - this should be set to false if doing File Export
License requirements: None.
fileSaveFlag() - Method in interface nxopen.Catiav5Creator
Returns the file save flag - this should be set to false if doing File Export
License requirements: None.
fileSaveFlag() - Method in interface nxopen.DxfdwgCreator
Returns the file save flag - this should be set to false if doing File Export
License requirements: None.
fileSaveFlag() - Method in interface nxopen.IgesCreator
Returns the file save flag - set to false if doing file export
License requirements: None.
fileSaveFlag() - Method in interface nxopen.Step203Creator
Returns the file save flag - set to false if doing file export
License requirements: None.
fileSaveFlag() - Method in interface nxopen.Step214Creator
Returns the file save flag - set to false if doing file export
License requirements: None.
FileSelection - Interface in nxopen.blockstyler
Represents File Selection With Browse block .
fileSpecification() - Method in interface nxopen.markup.File
Returns the file specification
License requirements: None.
fileSuppressWarnings(boolean) - Method in interface nxopen.uf.UFMotion
Refer to UF_MOTION_file_suppress_warnings for documentation.
fileTceName() - Method in interface nxopen.motion.FlexBodyBuilder
Returns the TCE RFI file name
License requirements: None.
fileToOpen - Variable in class nxopen.uf.UFProcessAid.AskSourceObjectData
 
fileType() - Method in interface nxopen.cae.LaminateImportedLayupBuilder
Returns the type of file to be imported
License requirements: None.
fileTypes - Variable in class nxopen.uf.UFUgmgr.ListPartRevFilesData
 
fileUnits() - Method in interface nxopen.STLImporter
Returns the file units.
fileUnits() - Method in interface nxopen.VRMLImporter
Returns the file units.
FILL - Static variable in class nxopen.cae.xyplot.BarColorOption
Fill color or contour color with no shading
FILL - Static variable in class nxopen.cae.xyplot.PlateColorOption
Fill color with no shading
FILL - Static variable in class nxopen.cam.DisplayPath.PathDisplayTypes
Path Display: Fill
FILL - Static variable in class nxopen.cam.OperationDisplayOptionsBuilder.PathDisplayTypes
Path Display: Fill
fill(nxopen.features.Feature) - Method in interface nxopen.die.DieCollection
Creates/Edits the die area fill feature builder.
FILL - Static variable in class nxopen.features.sheetmetal.GussetBuilder.PlacementTypes
Users will specify the spacing of Gussets on the selected bend face and software will calculate the number of occurances.
Fill - Interface in nxopen.weld
Represents a Weld Fill feature
To create or edit an instance of this class, use WeldFillBuilder

Created in NX7.5.0
FILL - Static variable in class nxopen.weld.WeldObjectBuilder.CommandName
Fill command
FILL_HOLE - Static variable in class nxopen.facet.FillHoleBuilder.Types
Fills individual hole(s).
FILL_ISLAND - Static variable in class nxopen.facet.FillHoleBuilder.Types
Fills a hole defined by inner island and outer facet body.
FILL_PAT_TYPE_SOLID - Static variable in class nxopen.uf.UFConstants
 
FILL_PATH_LENGTH - Static variable in class nxopen.features.GeomcopyBuilder.AlongPathDistanceOptions
fill path length option
FILL_VIEW - Static variable in class nxopen.preferences.SessionVisualizationHighQualityImage.ImageSizeType
 
fillArea - Variable in class nxopen.cae.Post.AnnotationBox
 
FillArea - Interface in nxopen.die
Represents a die design fill area feature.
fillArea() - Method in interface nxopen.markup.EditObjectDisplayBuilder
Returns the closed area needs to be filled with color or not.
FillAreaBuilder - Interface in nxopen.die
Represents a builder that is used to create or edit a FillArea feature.
FillAreaBuilder.Types - Class in nxopen.die
Identifies the area of the casting the fill is targeted for.
FillAreaBuilder.UpperLimitTypes - Class in nxopen.die
Specifies how the upper limit of the fill area is defined.
fillBoundary() - Method in interface nxopen.geometricutilities.PatternFill
Returns the fill boundary
License requirements: None.
FillBuilder - Interface in nxopen.die
Represents an Area Fill feature
To create a new instance of this class, use DieCollection.fill(nxopen.features.Feature)

Created in NX4.0.0
FillBuilder.RegionBoundsData - Class in nxopen.die
This class holds the data returned from FillBuilder.getRegionBounds()
FILLBY_BOUNDARY - Static variable in class nxopen.geometricutilities.PatternFill.PatternFillOptions
section is for fill area.
FILLBY_FACE - Static variable in class nxopen.geometricutilities.PatternFill.PatternFillOptions
section is face-based, and for fill area.
FILLED - Static variable in class nxopen.drawings.ArrowStyleType
Filled
FILLED - Static variable in class nxopen.drawings.SectionLineStyleBuilder.ArrowheadStyleType
Deprecated.
 
FILLED - Static variable in class nxopen.drawings.ViewProjectedArrowSettingsBuilder.DimensionsStyleType
 
FILLED - Static variable in class nxopen.drawings.ViewSectionLineBuilder.StyleType
 
FILLED - Static variable in class nxopen.preferences.RoutingLogical.FlowArrowEnumType
Filled arrow head on flow arrow.
filled - Variable in class nxopen.uf.UFDrf.AskArrowData
 
filled - Variable in class nxopen.uf.UFGdt.LeaderSpec
 
FILLED_ARROW - Static variable in class nxopen.annotations.ArrowheadType
 
FILLED_ARROW - Static variable in class nxopen.annotations.LeaderData.ArrowheadType
Filled arrowhead type
FILLED_ARROW - Static variable in class nxopen.uf.UFDrf.ArrowheadAndFillType
 
FILLED_ARROWHEAD - Static variable in class nxopen.uf.UFDraw.ArwHeadCntl
 
FILLED_BOX - Static variable in class nxopen.annotations.ArrowheadType
 
FILLED_BOX - Static variable in class nxopen.uf.UFDrf.ArrowheadAndFillType
 
FILLED_CIRCLE - Static variable in class nxopen.cae.MarkerType0d
 
FILLED_CIRCLE - Static variable in class nxopen.cae.ModelDisplayBuilder.NodeMarkerType
Filled Circle
FILLED_CIRCLE - Static variable in class nxopen.cae.ModelDisplayBuilder.NodeUnattachedMarkerType
Filled Circle
FILLED_CIRCLE - Static variable in class nxopen.preferences.SessionModeling.EndpointDisplayStyleType
 
FILLED_CIRCLE - Static variable in class nxopen.preferences.SessionModeling.PoleDisplayStyleType
 
FILLED_CIRCLE - Static variable in class nxopen.preferences.SessionModeling.PoleEditStyleType
 
FILLED_CIRCLE - Static variable in class nxopen.uf.UFDisp.PolyMarker
 
FILLED_CIRCLE - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
 
FILLED_DATUM - Static variable in class nxopen.annotations.LeaderData.ArrowheadType
Filled datum symbol
FILLED_DATUM_ARROW - Static variable in class nxopen.annotations.ArrowheadType
 
FILLED_DIAMOND - Static variable in class nxopen.cae.MarkerType0d
 
FILLED_DIAMOND - Static variable in class nxopen.uf.UFDisp.PolyMarker
 
FILLED_DIAMOND - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
 
FILLED_DOT - Static variable in class nxopen.annotations.ArrowheadType
 
FILLED_DOT - Static variable in class nxopen.annotations.LeaderData.ArrowheadType
Filled dot symbol
FILLED_DOT - Static variable in class nxopen.uf.UFDrf.ArrowheadAndFillType
 
FILLED_DOUBLE_ARROW - Static variable in class nxopen.annotations.ArrowheadType
 
FILLED_DOUBLE_ARROW - Static variable in class nxopen.annotations.LeaderData.ArrowheadType
Filled double arrowhead type
FILLED_DOUBLE_ARROW - Static variable in class nxopen.uf.UFDrf.ArrowheadAndFillType
 
FILLED_DOWN_TRIANGLE - Static variable in class nxopen.uf.UFDisp.PolyMarker
 
FILLED_DOWN_TRIANGLE - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
 
FILLED_DOWN_TRIANGLE_IN_CIRCLE - Static variable in class nxopen.uf.UFDisp.PolyMarker
 
FILLED_DOWN_TRIANGLE_IN_CIRCLE - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
 
FILLED_DOWN_TRIANGLE_IN_SQUARE - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
 
FILLED_DOWN_TRIANGLEIN_SQUARE - Static variable in class nxopen.uf.UFDisp.PolyMarker
 
FILLED_LEFT_TRIANGLE - Static variable in class nxopen.uf.UFDisp.PolyMarker
 
FILLED_LEFT_TRIANGLE - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
 
FILLED_LEFT_TRIANGLE_IN_CIRCLE - Static variable in class nxopen.uf.UFDisp.PolyMarker
 
FILLED_LEFT_TRIANGLE_IN_CIRCLE - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
 
FILLED_LEFT_TRIANGLE_IN_SQUARE - Static variable in class nxopen.uf.UFDisp.PolyMarker
 
FILLED_LEFT_TRIANGLE_IN_SQUARE - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
 
FILLED_RIGHT_TRIANGLE - Static variable in class nxopen.uf.UFDisp.PolyMarker
 
FILLED_RIGHT_TRIANGLE - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
 
FILLED_RIGHT_TRIANGLE_IN_CIRCLE - Static variable in class nxopen.uf.UFDisp.PolyMarker
 
FILLED_RIGHT_TRIANGLE_IN_CIRCLE - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
 
FILLED_RIGHT_TRIANGLE_IN_SQUARE - Static variable in class nxopen.uf.UFDisp.PolyMarker
 
FILLED_RIGHT_TRIANGLE_IN_SQUARE - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
 
FILLED_SQUARE - Static variable in class nxopen.annotations.LeaderData.ArrowheadType
Filled square symbol
FILLED_SQUARE - Static variable in class nxopen.cae.MarkerType0d
 
FILLED_SQUARE - Static variable in class nxopen.uf.UFDisp.PolyMarker
 
FILLED_SQUARE - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
 
FILLED_SQUARE_WITH_ONE_RING - Static variable in class nxopen.cae.MarkerType0d
 
FILLED_SQUARE_WITH_TWO_RINGS - Static variable in class nxopen.cae.MarkerType0d
 
FILLED_UP_TRIANGLE - Static variable in class nxopen.uf.UFDisp.PolyMarker
 
FILLED_UP_TRIANGLE - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
 
FILLED_UP_TRIANGLE_IN_CIRCLE - Static variable in class nxopen.uf.UFDisp.PolyMarker
 
FILLED_UP_TRIANGLE_IN_CIRCLE - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
 
FILLED_UP_TRIANGLE_IN_SQUARE - Static variable in class nxopen.uf.UFDisp.PolyMarker
 
FILLED_UP_TRIANGLE_IN_SQUARE - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
 
Filler - Interface in nxopen.routing
Represents a Filler .
FILLER - Static variable in class nxopen.routing.PathStockBuilder.AssignStockType
Filler stock type.
FILLER - Static variable in class nxopen.routing.RouteManager.PartType
 
FILLER_STOCK - Static variable in class nxopen.routing.StockBrowserBuilder.TypeFilter
Filler Stock
FillerCollection - Interface in nxopen.routing
Represents a collection of Stock objects.
fillers() - Method in interface nxopen.routing.RouteManager
Filler stock Application collection .
FILLERSTOCK - Static variable in class nxopen.formboard.UpdateDiscrepancy.ObjectType
Filler stock.
FillerStockBuilder - Interface in nxopen.routing
Creates Filler stock on selected Segments.
FILLET - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSymbolType
 
FILLET - Static variable in class nxopen.annotations.Symbol
Specifies fillet weld symbol
FILLET - Static variable in class nxopen.cae.Mesh2dBuilder.GeometryType
Fillet
FILLET - Static variable in class nxopen.features.OffsetCurveBuilder.TrimOption
Fillet
FILLET - Static variable in class nxopen.features.sheetmetal.BreakCornerBuilder.TypeOptions
 
fillet(Curve, Curve, Point3d, Point3d, double, Sketch.TrimInputOption, Sketch.CreateDimensionOption, Sketch.AlternateSolutionOption) - Method in interface nxopen.Sketch
Fillets curves and creates appropriate constraints.
fillet(Curve, Curve, Point3d, Point3d, Point3d, double, Sketch.TrimInputOption, Sketch.CreateDimensionOption, Sketch.AlternateSolutionOption) - Method in interface nxopen.Sketch
Fillets curves and creates appropriate constraints.
fillet(Curve, Curve, Curve, Point3d, Point3d, Point3d, double, Sketch.TrimInputOption, Sketch.DeleteThirdCurveOption, Sketch.CreateDimensionOption, Sketch.AlternateSolutionOption) - Method in interface nxopen.Sketch
Fillets curves and creates appropriate constraints.
fillet(Curve, Curve, Curve, Point3d, Point3d, Point3d, Point3d, double, Sketch.TrimInputOption, Sketch.DeleteThirdCurveOption, Sketch.CreateDimensionOption, Sketch.AlternateSolutionOption) - Method in interface nxopen.Sketch
Fillets curves and creates appropriate constraints.
FILLET - Static variable in class nxopen.tooling.CornerDesignBuilder.CornerTypeOpt
fillet
FILLET - Static variable in class nxopen.tooling.PiercingInsertBuilder.NormalBbpslugType
Bottom plate slug type is fillet
FILLET - Static variable in class nxopen.tooling.PiercingInsertBuilder.NormalDsslugType
Die shoe slug type is fillet
FILLET - Static variable in class nxopen.tooling.PiercingInsertBuilder.PunchPocketTypeItemsBP
Punch pocket type in backing plate is fillet
FILLET - Static variable in class nxopen.tooling.PiercingInsertBuilder.PunchPocketTypeItemsPP
Punch pocket type in punch plate is fillet
FILLET - Static variable in class nxopen.tooling.PiercingInsertBuilder.PunchPocketTypeItemsSP
Punch pocket type in stripper plate is fillet
Fillet - Interface in nxopen.weld
Represents a Weld Fillet Feature.
FILLET - Static variable in class nxopen.weld.WeldJointBuilder.WeldTypes
T-Joint.
FILLET - Static variable in class nxopen.weld.WeldObjectBuilder.CommandName
Fillet Weld command
FILLET_ARC - Static variable in class nxopen.features.SectionSurfaceBuilder.SectionMethodCircularTangentEnum
Deprecated.
fillet arc
FILLET_ARC - Static variable in class nxopen.features.SectionSurfaceBuilderEx.SectionMethodCircleTangentType
fillet arc
FILLET_BRIDGE - Static variable in class nxopen.features.SectionSurfaceBuilder.Types
Deprecated.
fillet bridge
FILLET_BRIDGE - Static variable in class nxopen.features.SectionSurfaceBuilderEx.CubicType
Fillet Bridge mode
FILLET_DENSITY - Static variable in class nxopen.cae.MeshControlBuilder.Types
 
FILLET_FEATURE - Static variable in class nxopen.uf.UFConstants
 
FILLET_FEATURE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
 
FILLET_HILITE - Static variable in class nxopen.features.SectionSurfaceBuilder.Types
Deprecated.
fillet hilite
FILLET_NA_TYPE - Static variable in class nxopen.uf.UFWeld.Types
 
FILLET_PLN_PERP - Static variable in class nxopen.uf.UFConstants
 
FILLET_RHO - Static variable in class nxopen.features.SectionSurfaceBuilder.Types
Deprecated.
fillet rho
FILLET_SHOULDER - Static variable in class nxopen.features.SectionSurfaceBuilder.Types
Deprecated.
fillet shoulder
FILLET_TYPE - Static variable in class nxopen.uf.UFWeld.Types
 
FILLET_WELD - Static variable in class nxopen.uf.UFConstants
 
FILLET_WELD - Static variable in class nxopen.weld.WeldFeatureSetType
Fillet Weld
FILLET_WELD_NON_ASSOCIATIVE - Static variable in class nxopen.uf.UFConstants
 
FILLET_WELD_TYPE - Static variable in class nxopen.uf.UFWeld.Types
 
filletAxialElementSizeOption() - Method in interface nxopen.cae.MeshControlBuilder
Returns the cylinder axial element size option
License requirements: None.
FilletBuilder - Interface in nxopen.weld
Represents a Fillet builder.
FilletBuilder.EnumConstructionMethod - Class in nxopen.weld
the options for which construction method to use.
FilletBuilder.EnumContour - Class in nxopen.weld
the Contour enum.
FilletBuilder.EnumExtendEdges - Class in nxopen.weld
the options for populating the edge selections.
FilletBuilder.EnumExtensionMethod - Class in nxopen.weld
the Extension enum.
FilletBuilder.EnumSkipWeldMethod - Class in nxopen.weld
the Skipweld enum.
FilletBuilder.EnumWeldingType - Class in nxopen.weld
the WeldingType enum.
filletCircumMinElementSize() - Method in interface nxopen.cae.MeshControlBuilder
Returns the fillet circum min element size
License requirements: None.
filletCircumNumberElements() - Method in interface nxopen.cae.MeshControlBuilder
Returns the fillet circum number elements
License requirements: None.
filletCircumSizeOption() - Method in interface nxopen.cae.MeshControlBuilder
Returns the fillet circum size option
License requirements: None.
filletCircumTargetElemSize() - Method in interface nxopen.cae.MeshControlBuilder
Returns the fillet circum target elem size
License requirements: None.
filletColor() - Method in interface nxopen.weld.WeldJointBuilder
Returns the color for T-joint weld type joints
License requirements: None.
FilletData() - Constructor for class nxopen.Sketch.FilletData
 
filletDensitySize() - Method in interface nxopen.cae.MeshControlDisplayOptionsBuilder
Returns the fillet density size
License requirements: None.
filletDirectionVector() - Method in interface nxopen.features.AOCSBuilder
Returns the fillet vector
License requirements: solid_modeling ("SOLIDS MODELING")
.
filletElementSize() - Method in interface nxopen.cae.MeshControlBuilder
Returns the fillet element size
License requirements: None.
FilletFaceMethod - Interface in nxopen.cae
Represents the output from the fillet face smart selector method
To obtain an instance of this class use CAE::SmartSelectionManager
.
filletFont() - Method in interface nxopen.weld.WeldJointBuilder
Returns the curve font for T-joint weld type joints
License requirements: None.
filletingRadius() - Method in interface nxopen.cam.CornerControlBuilder
Returns the corner filleting radius.
filletMaxAngle() - Method in interface nxopen.cae.MeshControlBuilder
Returns the fillet max angle
License requirements: None.
filletMaxRad - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms
 
filletMaxRad - Variable in class nxopen.uf.UFSf.UgsMeshAbstractionParams
 
filletMaxRad - Variable in class nxopen.uf.UFSf.UgsTetMeshParms
 
filletMaxRadius() - Method in interface nxopen.cae.MeshControlBuilder
Returns the fillet max radius
License requirements: None.
filletMethod() - Method in interface nxopen.cae.MeshControlBuilder
Returns the fillet method
License requirements: None.
filletMinAngle() - Method in interface nxopen.cae.MeshControlBuilder
Returns the fillet min angle
License requirements: None.
filletMinRad - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms
 
filletMinRad - Variable in class nxopen.uf.UFSf.UgsMeshAbstractionParams
 
filletMinRad - Variable in class nxopen.uf.UFSf.UgsTetMeshParms
 
filletMinRadius() - Method in interface nxopen.cae.MeshControlBuilder
Returns the fillet min radius
License requirements: None.
filletNumElem - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms
 
filletNumElem - Variable in class nxopen.uf.UFSf.UgsMeshAbstractionParams
 
filletNumElem - Variable in class nxopen.uf.UFSf.UgsTetMeshParms
 
filletOption() - Method in interface nxopen.features.AOCSBuilder
Returns the fillet option
License requirements: solid_modeling ("SOLIDS MODELING")
.
filletRadius() - Method in interface nxopen.features.AOCSBuilder
Returns the fillet radius
License requirements: solid_modeling ("SOLIDS MODELING")
.
filletRadius() - Method in interface nxopen.features.DraftBodyBuilder
Returns the fillet radius
License requirements: None.
filletradscale() - Method in interface nxopen.cae.ResultVariable
Returns the Fillet radius scale factor
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
fillets - Variable in class nxopen.Sketch.FilletData
The fillet arcs that are created.
filletSectionCorners() - Method in interface nxopen.features.sheetmetal.DimpleBuilder
Returns the Rounding Option for section Corners which contain Non Fillet Radii
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
filletSectionCorners() - Method in interface nxopen.features.sheetmetal.DrawnCutoutBuilder
Returns the Rounding Option for section Corners which contain Non Fillet Radii
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
FilletSizes() - Constructor for class nxopen.weld.JointExitBuilder.FilletSizes
 
FilletSizes(double, double, double) - Constructor for class nxopen.weld.JointExitBuilder.FilletSizes
Constructor for the FilletSizes object.
filletToggle - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms
 
filletToggle - Variable in class nxopen.uf.UFSf.UgsMeshAbstractionParams
 
filletToggle - Variable in class nxopen.uf.UFSf.UgsTetMeshParms
 
filletType - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms
 
filletType - Variable in class nxopen.uf.UFSf.UgsMeshAbstractionParams
 
filletType - Variable in class nxopen.uf.UFSf.UgsTetMeshParms
 
filletType() - Method in interface nxopen.weld.FilletBuilder
Returns the fillet type.
filletWidth() - Method in interface nxopen.weld.WeldJointBuilder
Returns the curve with for T-joint weld type joints
License requirements: None.
fillForAddendum() - Method in interface nxopen.die.FillBuilder
Returns the fill for addendum setting of the area fill
License requirements: die_engineering ("DIE ENGINEERING")
.
FillHole - Interface in nxopen.features
Represents a fill hole feature
To create or edit an instance of this class, use FillHoleBuilder

Created in NX9.0.0
FillHoleBuilder - Interface in nxopen.facet
This class finds and fills holes to a prescribed boundary smoothness condition
To create a new instance of this class, use FacetedBodyCollection.createFillHoleBuilder()
Default values.
FillHoleBuilder - Interface in nxopen.features
Represents a FillHole builder
To create a new instance of this class, use FreeformSurfaceCollection.createFillHoleBuilder(nxopen.features.FillHole)
Default values.
FillHoleBuilder.BorderContinuity - Class in nxopen.features
Represents continuity value at a border curve.
FillHoleBuilder.ContinuityTypes - Class in nxopen.features
border continuity connects border object with the surface continuity
FillHoleBuilder.ShapeControlTypes - Class in nxopen.features
type of the shape control
FillHoleBuilder.SmoothTypes - Class in nxopen.facet
Smoothness and boundary continuity options.
FillHoleBuilder.TargetTypes - Class in nxopen.facet
Options defining how to target holes for filling.
FillHoleBuilder.Types - Class in nxopen.facet
Hole filling type options.
fillHoles(boolean) - Method in interface nxopen.facet.FillHoleBuilder
Fills targeted holes.
fillHolesOption() - Method in interface nxopen.cae.Shell2SolidBuilder
Returns the mesh size variation
License requirements: nx_masterfem ("Finite Element Modeling")
.
FILLIN_FLARED_BEVEL_GROOVE - Static variable in class nxopen.weld.WeldGrooveBuilder.Types
Fillin Flared Bevel Groove
FILLIN_FLARED_VGROOVE - Static variable in class nxopen.weld.WeldGrooveBuilder.Types
 
FILLING_COEFFICIENT - Static variable in class nxopen.features.shipdesign.InverseBendingLinesBuilder.MethodType
Filling Coefficient (unsupported).
fillingCoefficient() - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder
Returns the filling coefficient that represents the amplitude of the bending line relative to the profile height.
fillingColor() - Method in interface nxopen.cae.xyplot.BaseBarStyleSetting
Returns the filling color
License requirements: None.
fillingColor() - Method in interface nxopen.cae.xyplot.BasePlateStyleSetting
Returns the filling color
License requirements: None.
fillingColor() - Method in interface nxopen.cae.xyplot.SurfaceStyleSetting
Returns the filling color
License requirements: None.
fillingColor() - Method in interface nxopen.cae.xyplot.TextBoxStyleSetting
Returns the text box filling color
License requirements: None.
fillMargin() - Method in interface nxopen.geometricutilities.PatternFill
Returns the fill margin
License requirements: None.
fillName() - Method in interface nxopen.cae.LaminateFillSetupBuilder
Returns the name of the laminate fill setup
License requirements: None.
fillOptions() - Method in interface nxopen.geometricutilities.PatternFill
Returns the fill options
License requirements: None.
fillPathLength() - Method in interface nxopen.features.GeomcopyBuilder
Returns the fill path length, a distance option for along path type of instancing.
fillPercentage() - Method in interface nxopen.routing.electrical.CablewaysBuilder
Returns the fill percentage expression
License requirements: routing_cabling ("Routing Cabling")
.
fillStripList() - Method in interface nxopen.weld.WeldFillBuilder
Returns the fill strip list.
FILLZERO - Static variable in class nxopen.cae.ResultProbeBuilder.ErrorHandling
 
FILM_THICKNESS - Static variable in class nxopen.cae.Result.Quantity
 
filter() - Method in interface nxopen.annotations.PinListBuilder
Returns the category specifies the filter type.
FILTER - Static variable in class nxopen.assemblies.SearchTerm.SearchTermLogicType
Filter using results found by this search term
filter(UIBlock, TaggedObject) - Method in interface nxopen.blockstyler.BlockDialog.Filter
Filter callback
License requirements: None.
filter() - Method in interface nxopen.blockstyler.FileSelection
Returns the Filter
License requirements: None.
filter() - Method in interface nxopen.tooling.CompDrawingBuilder
Returns the filter to select component for drawing.
filter() - Method in interface nxopen.weld.ConnectionFinderBuilder
Returns the filter values to contol Save All processing.
FilterBuilder - Interface in nxopen.features.shipdesign
A builder that allows the user to define common properties of ship objects and then add objects of similar properties to the select object list.
filterCallback(NXObject, Selection.MaskTriple, SelectionHandle) - Method in interface nxopen.Selection.FilterCallback
Deprecated.
Deprecated in NX8.0.0. Use Selection#filterTaggedObjectCallback instead
filterCondition() - Method in interface nxopen.visualreporting.Rule
Returns the filter Condition from this Rule .
filterFile - Variable in class nxopen.validate.XmlComparator.Options
File specification of filter file.
filterNavigator() - Method in interface nxopen.assemblies.ConstraintDisplayBuilder
Returns the flag indicating whether the assembly navigator should filter hidden constraints.
filterOnCurrentSpecifications(CharacteristicList, String[]) - Method in interface nxopen.preferences.RoutingPartLibrary
Does a characteristic list match the current discipline and specifications?
filterOptionValue() - Method in interface nxopen.routing.DesignRuleViolationViewer
Returns the value for filter option of route Design Rule Violation
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
filterpaths - Variable in class nxopen.routing.ManualRouteBuilder.CreateValidPointsOnPathsData
 
filterRadius() - Method in interface nxopen.cae.optimization.TBSTopologySensitivityOptimizationParameters
Returns the filter for mesh independence and minimum size
License requirements: None.
filterString() - Method in interface nxopen.routing.CompareRunsBuilder
Returns the filter used to limit which runs are compared among those in the folder or on the item revision
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
filterString - Variable in class nxopen.uf.UFUi.CreateFileboxData
 
filterTag - Variable in class nxopen.uf.UFAssem.AskLastFilterData
 
filterTaggedObjectCallback(TaggedObject, Selection.MaskTriple, SelectionHandle) - Method in interface nxopen.Selection.FilterTaggedObjectCallback
It is an optional callback which the user can provide to perform application specific filtering when selecting tagged objects.
filterType() - Method in interface nxopen.routing.StockBrowserBuilder
Returns the stock type filter which defines the type of stock
License requirements: routing_base ("Routing Basic")
.
FIN_TOPO - Static variable in class nxopen.uf.UFBrep.TopoType
 
FINAL - Static variable in class nxopen.routing.IsoDrawingBuilder.DrawingTypes
 
FINAL_FINISH_PASS - Static variable in class nxopen.cam.Cutcom.Types
cutter compensation on last finish pass
FINAL_FINISH_PASS - Static variable in class nxopen.cam.NcmPlanarBuilder.CutcomTypes
cutter compensation on last finish pass
FINAL_PASS - Static variable in class nxopen.cam.NcmHoleMachining.CutcomTypes
cutter compensation on last pass
finalizeCreatePartingSurface() - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
Finalize the creation of bounded plane or enlarged surface parting surface.
finalizeCreation(Part, String, String, BaseFemPart.AxisymAbstractionType, String[]) - Method in interface nxopen.cae.AssyFemPart
Finalizes the creation of the assembly fem part file.
finalizeCreation(Part, String, String, String[]) - Method in interface nxopen.cae.AssyFemPart
finalizeCreation(Part, String, FemPart.UseBodiesOption, Body[], FemSynchronizeOptions, String, String, String[]) - Method in interface nxopen.cae.FemPart
finalizeCreation(Part, String, FemPart.UseBodiesOption, Body[], FemSynchronizeOptions, String, String, BaseFemPart.AxisymAbstractionType, String[]) - Method in interface nxopen.cae.FemPart
Finalizes the creation of the fem part file.
finalizeCreation(Part, String, FemPart.UseBodiesOption, Body[], FemSynchronizeOptions, String, String, BaseFemPart.AxisymAbstractionType, String[], boolean) - Method in interface nxopen.cae.FemPart
Finalizes the creation of the fem part file.
finalizeCreation(CaePart, String[]) - Method in interface nxopen.cae.SimPart
Finalizes the creation of the sim part file.
finalizeCreation(CaePart, int, String[]) - Method in interface nxopen.cae.SimPart
Finalizes the creation of the sim part file.
finalizeCreationManaged(Part, boolean, FemPart.UseBodiesOption, Body[], FemSynchronizeOptions, String, String, BaseFemPart.AxisymAbstractionType, String[]) - Method in interface nxopen.cae.FemPart
Finalizes the creation of the fem part file.
finalizeCreationManaged(Part, boolean, FemPart.UseBodiesOption, Body[], FemSynchronizeOptions, String, String, String[]) - Method in interface nxopen.cae.FemPart
finalizePlacement(CharacteristicList, CharacteristicList, String, int, int, boolean) - Method in interface nxopen.routing.PlacePartBuilder
Complete the placement operation.
finalizePlacementForScrewSeat(TaggedObject, TaggedObject, Point3d, Point3d, Expression, Expression, Vector3d, TaggedObject, TaggedObject) - Method in interface nxopen.routing.EditPlacePartBuilder
Places a screw measurement holder seat part onto a target object by locating and constraining by the given parameters.
finalRetract() - Method in interface nxopen.cam.NcmHoleMachining
Returns the final retract settings
License requirements: None.
finalRetractDistance() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
Returns the retract distance for simulated cycles
License requirements: None.
finalRetractType() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
Returns the retract type for simulated cycles
License requirements: None.
finalSafeDistance() - Method in interface nxopen.cam.NcmHoleMachining
Returns the final safe distance builder (inheritable tool dep)
License requirements: None.
finalSafeDistanceBuilder() - Method in interface nxopen.cam.NcmPlanarBuilder
Returns the final safe distance builder (inheritable tool dep)
License requirements: None.
finalStock() - Method in interface nxopen.cam.GeometrySet
Returns the final stock
License requirements: None.
finalType() - Method in interface nxopen.cam.NcmHoleMachining
Returns the final type
License requirements: None.
finalType() - Method in interface nxopen.cam.NcmPlanarBuilder
Returns the final type
License requirements: None.
find(String) - Method in interface nxopen.cae.AssyFEModel
Finds the NXObject with the given identifier as recorded in a journal.
find(String) - Method in interface nxopen.cae.BaseIteration
Returns a BaseResultType
License requirements: None.
find(String) - Method in interface nxopen.cae.BaseLoadcase
Returns a BaseIteration
License requirements: None.
find(String) - Method in interface nxopen.cae.FEModel
Finds the NXObject with the given identifier as recorded in a journal.
find(String) - Method in interface nxopen.cae.FEModelOccurrence
Finds the object within the FEModelOccurrence context, with the given identifier as recorded in a journal.
find(String) - Method in interface nxopen.cae.optimization.TBSOptimizationSolution
Finds the TaggedObject with the given identifier as recorded in a journal.
find(String) - Method in interface nxopen.cae.Result
Returns a BaseLoadcase
License requirements: None.
find(String) - Method in interface nxopen.cae.ResultMeasureCollection
Finds the ResultMeasure with the given identifier as recorded in a journal.
find(String) - Method in interface nxopen.cae.SimConditionCollection
Collection's object finder
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
find(String) - Method in interface nxopen.cae.SimConditionParamCollection
Collection's object finder
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
find(String) - Method in interface nxopen.cae.SimConditionSequenceCollection
Collection's object finder
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
find(String) - Method in interface nxopen.cae.SimConditionTimeStepCollection
Collection's object finder
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
find(String) - Method in interface nxopen.cae.SimLoadRecipeCollection
Finds a Load Recipe with a specified name.
find(String) - Method in interface nxopen.cae.SimLoadRecipeMapEntryCollection
Finds a Load Recipe Map Entry of a certain index.
find(String) - Method in interface nxopen.cae.SimLoadRecipeMappingCollection
Finds a Load Recipe Maping of a certain load type.
find(String) - Method in interface nxopen.cae.SimLoadRecipeSourceCollection
Finds a Source with a specified path.
find(String) - Method in interface nxopen.cae.SimSolution
Returns the children of the Solution of the given Identifier
License requirements: None.
find(String) - Method in interface nxopen.cae.SimSolutionStep
Returns the children of the Solution Step of the given Identifier
License requirements: None.
find(String) - Method in interface nxopen.cae.xyplot.AxisStyleSetting
Finds the NXObject with the given identifier as recorded in a journal.
find(String) - Method in interface nxopen.cae.xyplot.BasicModel
Finds the NXObject with the given identifier as recorded in a journal.
find(String) - Method in interface nxopen.cae.xyplot.Graph
Finds the NXObject with the given identifier as recorded in a journal.
find(String) - Method in interface nxopen.cae.xyplot.Plot
Finds the NXObject with the given identifier as recorded in a journal.
find(String) - Method in interface nxopen.CollaborativeDesignCollection
Finds the TaggedObject with the given identifier as recorded in a journal.
find(String) - Method in interface nxopen.ColorManager
Finds a color with the specified name
License requirements: None.
find(int) - Method in interface nxopen.ColorManager
Finds a color with the specified ID
License requirements: None.
find(String) - Method in interface nxopen.display.CgfxAttrCollection
Deprecated.
Deprecated in NX10.0.0. No alternative provided for this class.
find(String) - Method in interface nxopen.display.CgfxMattexCollection
Deprecated.
Deprecated in NX10.0.0. No alternative provided for this class.
find(String) - Method in interface nxopen.display.IDynamicSectionCutCreator
Finds the DynamicSectionCut with the given identifier as recorded in a journal.
find(String) - Method in interface nxopen.motion.GraphManager
Finds the Graph object with the given name.
findActivePressModel() - Method in interface nxopen.die.DieSimCollection
Finds the active press model, if any, in the part's assembly structure
License requirements: ug_die_design ("Die Design")
.
findAllFunctions() - Method in interface nxopen.uf.UFMotion
Refer to UF_MOTION_find_all_functions for documentation.
FindAllFunctionsData() - Constructor for class nxopen.uf.UFMotion.FindAllFunctionsData
 
findAllSubdirectories(String) - Method in interface nxopen.uf.UF
Refer to UF_find_all_subdirectories for documentation.
FindAllSubdirectoriesData() - Constructor for class nxopen.uf.UF.FindAllSubdirectoriesData
 
findAllVisibleConnectedElements() - Method in interface nxopen.cae.modelcheck.AlignShellElementNormalBuilder
Finds all visible elements connected with the seed element
License requirements: None.
findApparentIntersections() - Method in interface nxopen.annotations.HatchStyleBuilder
Returns the Find Apparent Intersections creation flag.
findAttribute(Tag, int, String) - Method in interface nxopen.uf.UFAttr
Refer to UF_ATTR_find_attribute for documentation.
findAxis(String) - Method in interface nxopen.sim.KinematicConfigurator
Find the axis with the given name
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
FindAxisData() - Constructor for class nxopen.sim.KinematicConfigurator.FindAxisData
 
findBlock(String) - Method in interface nxopen.blockstyler.CompositeBlock
Finds a block contained in the composite block.
findBodiesWithoutMaterial() - Method in interface nxopen.PhysicalMaterialCollection
Returns the bodies that don't have a material assigned.
findBodiesWithoutPreferredMaterial() - Method in interface nxopen.PhysicalMaterialCollection
Returns the bodies that are not using the preferred material (either no material assigned or the non-preferred a different material assigned).
findBodyHoles(Body) - Method in interface nxopen.tooling.EdgePatchBuilder
Find holes on the input body.
FindByAttributesBuilder - Interface in nxopen.routing
Find runs/objects with specified attribute name and attribute value criteria, highlight the corresponding nodes in the run navigator and the graphics area
To create a new instance of this class, use RouteManager.createFindByAttributesBuilder()

Created in NX8.5.0
findByObject(TaggedObject) - Method in interface nxopen.mechatronics.PMNavFolderObjectCollection
Finds the PMNavFolderObject object with the given physics object.
findCachedReferencers(String) - Method in interface nxopen.cae.GRMSearch
Find CAE Objects as above, only from the cache of already searched items.
findCheckerNode(int) - Method in interface nxopen.validate.Validator
Returns a checker node.
findClonePartItem(String) - Method in interface nxopen.tooling.CloneObject
Find the part item to be cloned by giving part name
License requirements: None.
findClonePartItemByIndex(int) - Method in interface nxopen.tooling.CloneObject
Find the part item to be cloned by giving index
License requirements: None.
findClosestPoint(UFVariant, double[]) - Method in interface nxopen.uf.UFEvalsf
Refer to UF_EVALSF_find_closest_point for documentation.
findCompByName(UFVariant, String, String) - Method in interface nxopen.uf.UFSim
Refer to UF_SIM_find_comp_by_name for documentation.
findComponentsBySystemClass(int) - Method in interface nxopen.sim.KinematicConfigurator
findComponentsBySystemClass(KinematicComponentBuilder.SystemClass) - Method in interface nxopen.sim.KinematicConfigurator
Finds component which are of the given system class
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder") OR resource_manager_nx ("Teamcenter Resource Manager")
.
findConfiguredRev(Tag, Tag) - Method in interface nxopen.uf.UFUgmgr
Refer to UF_UGMGR_find_configured_rev for documentation.
findConnections() - Method in interface nxopen.routing.electrical.ConnectorDevice
Find connections.
findControlPoint(Point3d, double) - Method in interface nxopen.routing.ControlPointCollection
Finds an existing ControlPoint at the given ABS coordinates within the given tolerance.
findCrosshatchFile(String) - Method in interface nxopen.annotations.HatchFillSettingsBuilder
Finds the crosshatch file from pattern.
findDataset(Tag, String) - Method in interface nxopen.uf.UFClear
Deprecated.
The equivalent Open C method has retired
findDecalObject(String) - Method in interface nxopen.display.DecalCollection
Finds the Decal with the given identifier as recorded in a journal.
findEdgeInFacet(Tag, int, double[], double[]) - Method in interface nxopen.uf.UFFacet
Refer to UF_FACET_find_edge_in_facet for documentation.
FindEdgeInFacetData() - Constructor for class nxopen.uf.UFFacet.FindEdgeInFacetData
 
findEdgesPatch(NXObject[]) - Method in interface nxopen.tooling.EdgePatchBuilder
Get hole information of input edges.
findElementIndex(CamProfileBuilder.Element) - Method in interface nxopen.mechatronics.CamProfileBuilder
Find the element index.
finder() - Method in interface nxopen.assemblies.SubsetBuilder
Returns the FindInCollaborativeDesign for use in the context determined by this builder.
findFaceHoles(Face) - Method in interface nxopen.tooling.EdgePatchBuilder
Find holes on the input faces.
findFacePairs() - Method in interface nxopen.features.MidSurfaceByFacePairs
Get the face pair data from midsurface feature or solid body
License requirements: solid_modeling ("SOLIDS MODELING")
.
findFaceSet(int) - Method in interface nxopen.features.OffsetSurfaceBuilder
Deprecated.
Deprecated in NX5.0.0. Use OffsetSurfaceBuilder.faceSets() instead.
findFamilyInstance(Tag, int, boolean, boolean) - Method in interface nxopen.uf.UFPart
Refer to UF_PART_find_family_instance for documentation.
findFeatures() - Method in interface nxopen.cam.FeatureRecognitionBuilder
Finds manufacturing features
License requirements: None.
findFile(String, String) - Method in interface nxopen.uf.UF
Refer to UF_find_file for documentation.
findFile(Tag, String) - Method in interface nxopen.uf.UFDirpath
Refer to UF_DIRPATH_find_file for documentation.
findFromConnector() - Method in interface nxopen.routing.electrical.ElectricalStockDevice
Find the from connector for this stock device.
findHoles() - Method in interface nxopen.facet.FillHoleBuilder
Locates holes in the mesh and creates polylines around them.
findImmedOldComps(Tag) - Method in interface nxopen.uf.UFAssem
Refer to UF_ASSEM_find_immed_old_comps for documentation.
FindImmedOldCompsData() - Constructor for class nxopen.uf.UFAssem.FindImmedOldCompsData
 
findImplementedConnection() - Method in interface nxopen.routing.electrical.ElectricalStockDevice
Find the nxopen.routing.electrical.Connection implemented by this device.
FindInCollaborativeDesign - Interface in nxopen.assemblies
FindInCollaborativeDesign is a searcher for performing simple searches in the context of a subset.
FindInCollaborativeDesign.ObjectType - Class in nxopen.assemblies
The type of object for which the search is performed.
FindInCollaborativeDesign.SearchType - Class in nxopen.assemblies
The attribute against which the search text is matched.
findIndex(ArbitraryAreaSeedBuilder) - Method in interface nxopen.annotations.ArbitraryAreaSeedBuilderList
Finds the index where the input object appears.
findIndex(DatumReferenceBuilder) - Method in interface nxopen.annotations.DatumReferenceBuilderList
Finds the index where the input object appears.
findIndex(FeatureControlFrameDataBuilder) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilderList
Finds the index where the input object appears.
findIndex(LeaderData) - Method in interface nxopen.annotations.LeaderDataList
Finds the index where the input object appears.
findIndex(MasterSymbolListItemBuilder) - Method in interface nxopen.annotations.MasterSymbolListItemBuilderList
Finds the index where the input object appears.
findIndex(SymbolCatalogParameterBuilder) - Method in interface nxopen.annotations.SymbolCatalogParameterBuilderList
Finds the index where the input object appears.
findIndex(TitleBlockCellBuilder) - Method in interface nxopen.annotations.TitleBlockCellBuilderList
Finds the index where the input object appears.
findIndex(Partition) - Method in interface nxopen.assemblies.PartitionList
Finds the index where the input object appears.
findIndex(Body) - Method in interface nxopen.BodyList
Finds the index where the input object appears.
findIndex(DependentMeshListItemBuilder) - Method in interface nxopen.cae.DependentMeshListItemBuilderList
Finds the index where the input object appears.
findIndex(ManualSweepBetweenListItemSelection) - Method in interface nxopen.cae.ManualSweepBetweenListItemSelectionList
Finds the index where the input object appears.
findIndex(MeshManualSweepBetweenListItemSelection) - Method in interface nxopen.cae.MeshManualSweepBetweenListItemSelectionList
Finds the index where the input object appears.
findIndex(BoundaryMemberSet) - Method in interface nxopen.cam.BoundaryMemberSetList
Finds the index where the input object appears.
findIndex(BoundarySet) - Method in interface nxopen.cam.BoundarySetList
Finds the index where the input object appears.
findIndex(BoundaryTurnVariableStockSet) - Method in interface nxopen.cam.BoundaryTurnVariableStockSetList
Finds the index where the input object appears.
findIndex(CAMFeature) - Method in interface nxopen.cam.CAMFeatureList
Finds the index where the input object appears.
findIndex(CollisionPairBuilder) - Method in interface nxopen.cam.CollisionPairBuilderList
Finds the index where the input object appears.
findIndex(CustomLoopSet) - Method in interface nxopen.cam.CustomLoopSetList
Finds the index where the input object appears.
findIndex(CutVolume) - Method in interface nxopen.cam.CutVolumeList
Finds the index where the input object appears.
findIndex(DriveChainItemBuilder) - Method in interface nxopen.cam.DriveChainItemBuilderList
Finds the index where the input object appears.
findIndex(GeometrySet) - Method in interface nxopen.cam.GeometrySetList
Finds the index where the input object appears.
findIndex(HoldingSystemBuilder) - Method in interface nxopen.cam.HoldingSystemBuilderList
Finds the index where the input object appears.
findIndex(HoleBossSet) - Method in interface nxopen.cam.HoleBossSetList
Finds the index where the input object appears.
findIndex(InPathEventDataBuilder) - Method in interface nxopen.cam.InPathEventDataBuilderList
Finds the index where the input object appears.
findIndex(LaserControlPoint) - Method in interface nxopen.cam.LaserControlPointList
Finds the index where the input object appears.
findIndex(ManualFeatureBuilder) - Method in interface nxopen.cam.ManualFeatureBuilderList
Finds the index where the input object appears.
findIndex(Splitter) - Method in interface nxopen.cam.SplitterList
Finds the index where the input object appears.
findIndex(SurfaceDriveGeometrySet) - Method in interface nxopen.cam.SurfaceDriveGeometrySetList
Finds the index where the input object appears.
findIndex(TabPointDataBuilder) - Method in interface nxopen.cam.TabPointDataBuilderList
Finds the index where the input object appears.
findIndex(ThreadedBossSet) - Method in interface nxopen.cam.ThreadedBossSetList
Finds the index where the input object appears.
findIndex(ThreadedHoleSet) - Method in interface nxopen.cam.ThreadedHoleSetList
Finds the index where the input object appears.
findIndex(ToolPathSplitItemBuilder) - Method in interface nxopen.cam.ToolPathSplitItemBuilderList
Finds the index where the input object appears.
findIndex(Ude) - Method in interface nxopen.cam.UdeList
Finds the index where the input object appears.
findIndex(WedmCustomBoundaryDataBuilder) - Method in interface nxopen.cam.WedmCustomBoundaryDataBuilderList
Finds the index where the input object appears.
findIndex(WireGuide) - Method in interface nxopen.cam.WireGuideList
Finds the index where the input object appears.
findIndex(DateItemBuilder) - Method in interface nxopen.DateItemBuilderList
Finds the index where the input object appears.
findIndex(DieAssistantFlangeProfile) - Method in interface nxopen.die.DieAssistantFlangeProfileList
Finds the index where the input object appears.
findIndex(DieAssistantTrimProfile) - Method in interface nxopen.die.DieAssistantTrimProfileList
Finds the index where the input object appears.
findIndex(DieBooleanBuilder) - Method in interface nxopen.die.DieBooleanBuilderList
Finds the index where the input object appears.
findIndex(DieLimitsBuilder) - Method in interface nxopen.die.DieLimitsBuilderList
Finds the index where the input object appears.
findIndex(DieLocationBuilder) - Method in interface nxopen.die.DieLocationBuilderList
Finds the index where the input object appears.
findIndex(DrawBeadSegmentBuilder) - Method in interface nxopen.die.DrawBeadSegmentBuilderList
Finds the index where the input object appears.
findIndex(PierceItemBuilder) - Method in interface nxopen.die.PierceItemBuilderList
Finds the index where the input object appears.
findIndex(AttributeItemBuilder) - Method in interface nxopen.drafting.AttributeItemBuilderList
Finds the index where the input object appears.
findIndex(PrimaryContentItemBuilder) - Method in interface nxopen.drafting.PrimaryContentItemBuilderList
Finds the index where the input object appears.
findIndex(SectionLineSegmentBuilder) - Method in interface nxopen.drawings.SectionLineSegmentBuilderList
Finds the index where the input object appears.
findIndex(ShipDraftingViewLinesBuilder) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilderList
Finds the index where the input object appears.
findIndex(ViewStyleShipbuildingLinesBuilder) - Method in interface nxopen.drawings.ViewStyleShipbuildingLinesBuilderList
Finds the index where the input object appears.
findIndex(ExpressionCollectorSet) - Method in interface nxopen.ExpressionCollectorSetList
Finds the index where the input object appears.
findIndex(ExpressionSectionSet) - Method in interface nxopen.ExpressionSectionSetList
Finds the index where the input object appears.
findIndex(GlobalShapingCurveOffsetBuilder) - Method in interface nxopen.features.GlobalShapingCurveOffsetBuilderList
Finds the index where the input object appears.
findIndex(GlobalShapingPointOffsetBuilder) - Method in interface nxopen.features.GlobalShapingPointOffsetBuilderList
Finds the index where the input object appears.
findIndex(PartGeometryCopySelectBuilder) - Method in interface nxopen.features.PartGeometryCopySelectBuilderList
Finds the index where the input object appears.
findIndex(PointSetFacePercentageBuilder) - Method in interface nxopen.features.PointSetFacePercentageBuilderList
Finds the index where the input object appears.
findIndex(SMBoundaryConditionBuilder) - Method in interface nxopen.features.sheetmetal.SMBoundaryConditionBuilderList
Finds the index where the input object appears.
findIndex(AnchorPoint) - Method in interface nxopen.features.shipdesign.AnchorPointList
Finds the index where the input object appears.
findIndex(BulkHeadListItemBuilder) - Method in interface nxopen.features.shipdesign.BulkHeadListItemBuilderList
Finds the index where the input object appears.
findIndex(CornerCutListItemBuilder) - Method in interface nxopen.features.shipdesign.CornerCutListItemBuilderList
Finds the index where the input object appears.
findIndex(DeckListItemBuilder) - Method in interface nxopen.features.shipdesign.DeckListItemBuilderList
Finds the index where the input object appears.
findIndex(ItFrameListItemBuilder) - Method in interface nxopen.features.shipdesign.ItFrameListItemBuilderList
Finds the index where the input object appears.
findIndex(OrientationRegionItemBuilder) - Method in interface nxopen.features.shipdesign.OrientationRegionItemBuilderList
Finds the index where the input object appears.
findIndex(PlaneListBuilder) - Method in interface nxopen.features.shipdesign.PlaneListBuilderList
Finds the index where the input object appears.
findIndex(SeamBlockBuilder) - Method in interface nxopen.features.shipdesign.SeamBlockBuilderList
Finds the index where the input object appears.
findIndex(SectionViewBuilder) - Method in interface nxopen.features.shipdesign.SectionViewBuilderList
Finds the index where the input object appears.
findIndex(ShipNamesBuilder) - Method in interface nxopen.features.shipdesign.ShipNamesBuilderList
Finds the index where the input object appears.
findIndex(StandardPartItemBuilder) - Method in interface nxopen.features.shipdesign.StandardPartItemBuilderList
Finds the index where the input object appears.
findIndex(SteelInsulationBoundaryBuilder) - Method in interface nxopen.features.shipdesign.SteelInsulationBoundaryBuilderList
Finds the index where the input object appears.
findIndex(SubSystemBuilder) - Method in interface nxopen.features.shipdesign.SubSystemBuilderList
Finds the index where the input object appears.
findIndex(TransFrameListItemBuilder) - Method in interface nxopen.features.shipdesign.TransFrameListItemBuilderList
Finds the index where the input object appears.
findIndex(SmoothRangeBuilder) - Method in interface nxopen.features.SmoothRangeBuilderList
Finds the index where the input object appears.
findIndex(CageSectionData) - Method in interface nxopen.features.subdivision.CageSectionDataList
Finds the index where the input object appears.
findIndex(VariableRadiusPointsBuilder) - Method in interface nxopen.features.VariableRadiusPointsBuilderList
Finds the index where the input object appears.
findIndex(CloseRangeCameraListItemBuilder) - Method in interface nxopen.features.vehicledesign.CloseRangeCameraListItemBuilderList
Finds the index where the input object appears.
findIndex(CloseRangeDemoCylinderListItemBuilder) - Method in interface nxopen.features.vehicledesign.CloseRangeDemoCylinderListItemBuilderList
Finds the index where the input object appears.
findIndex(PathObjects) - Method in interface nxopen.fields.PathObjectsList
Finds the index where the input object appears.
findIndex(BlendSetbackBuilder) - Method in interface nxopen.geometricutilities.BlendSetbackBuilderList
Finds the index where the input object appears.
findIndex(BoundaryDefinitionBuilder) - Method in interface nxopen.geometricutilities.BoundaryDefinitionBuilderList
Finds the index where the input object appears.
findIndex(BoundingObjectBuilder) - Method in interface nxopen.geometricutilities.BoundingObjectBuilderList
Finds the index where the input object appears.
findIndex(EntityUsageInfo) - Method in interface nxopen.geometricutilities.EntityUsageInfoList
Finds the index where the input object appears.
findIndex(FaceSetOffset) - Method in interface nxopen.geometricutilities.FaceSetOffsetList
Finds the index where the input object appears.
findIndex(FtmFixedCurvesBuilder) - Method in interface nxopen.geometricutilities.FtmFixedCurvesBuilderList
Finds the index where the input object appears.
findIndex(FtmTransformCurvesBuilder) - Method in interface nxopen.geometricutilities.FtmTransformCurvesBuilderList
Finds the index where the input object appears.
findIndex(FtmTransformPointsBuilder) - Method in interface nxopen.geometricutilities.FtmTransformPointsBuilderList
Finds the index where the input object appears.
findIndex(InstanceEditedExpressionItem) - Method in interface nxopen.geometricutilities.InstanceEditedExpressionItemList
Finds the index where the input object appears.
findIndex(ParentEquivalencyMap) - Method in interface nxopen.geometricutilities.ParentEquivalencyMapList
Finds the index where the input object appears.
findIndex(PatternIncrementItem) - Method in interface nxopen.geometricutilities.PatternIncrementItemList
Finds the index where the input object appears.
findIndex(PatternSpacingsListItem) - Method in interface nxopen.geometricutilities.PatternSpacingsListItemList
Finds the index where the input object appears.
findIndex(ReduceSurfaceRadiusFaceGroupBuilder) - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusFaceGroupBuilderList
Finds the index where the input object appears.
findIndex(RotationSetBuilder) - Method in interface nxopen.geometricutilities.RotationSetBuilderList
Finds the index where the input object appears.
findIndex(ScalingSetBuilder) - Method in interface nxopen.geometricutilities.ScalingSetBuilderList
Finds the index where the input object appears.
findIndex(SelectionList) - Method in interface nxopen.geometricutilities.SelectionListList
Finds the index where the input object appears.
findIndex(StyledSweepDoubleOnPathDimBuilder) - Method in interface nxopen.geometricutilities.StyledSweepDoubleOnPathDimBuilderList
Finds the index where the input object appears.
findIndex(TransitionCurveBuilder) - Method in interface nxopen.geometricutilities.TransitionCurveBuilderList
Finds the index where the input object appears.
findIndex(TransitionLawNodeBuilder) - Method in interface nxopen.geometricutilities.TransitionLawNodeBuilderList
Finds the index where the input object appears.
findIndex(TwoExpressionsCollectorSet) - Method in interface nxopen.geometricutilities.TwoExpressionsCollectorSetList
Finds the index where the input object appears.
findIndex(TwoExpressionsSectionSet) - Method in interface nxopen.geometricutilities.TwoExpressionsSectionSetList
Finds the index where the input object appears.
findIndex(ListCreator) - Method in interface nxopen.ListCreatorList
Finds the index where the input object appears.
findIndex(ExternalConnectionElementBuilder) - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilderList
Finds the index where the input object appears.
findIndex(GanttOperationConditionBuilder) - Method in interface nxopen.mechatronics.GanttOperationConditionBuilderList
Finds the index where the input object appears.
findIndex(GanttOperationParameterBuilder) - Method in interface nxopen.mechatronics.GanttOperationParameterBuilderList
Finds the index where the input object appears.
findIndex(PathConstraintFrameBuilder) - Method in interface nxopen.mechatronics.PathConstraintFrameBuilderList
Finds the index where the input object appears.
findIndex(ProxyObjectParameterBuilder) - Method in interface nxopen.mechatronics.ProxyObjectParameterBuilderList
Finds the index where the input object appears.
findIndex(RuntimeFormulaParameterBuilder) - Method in interface nxopen.mechatronics.RuntimeFormulaParameterBuilderList
Finds the index where the input object appears.
findIndex(SHMSignalConnectionBuilder) - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilderList
Finds the index where the input object appears.
findIndex(SignalConnectionBuilder) - Method in interface nxopen.mechatronics.SignalConnectionBuilderList
Finds the index where the input object appears.
findIndex(SignalChartListItem) - Method in interface nxopen.motion.SignalChartListItemList
Finds the index where the input object appears.
findIndex(NXObject) - Method in interface nxopen.NXObjectList
Finds the index where the input object appears.
findIndex(TaggedObject) - Method in interface nxopen.ObjectList
Finds the index where the input object appears.
findIndex(Plane) - Method in interface nxopen.PlaneList
Finds the index where the input object appears.
findIndex(Point) - Method in interface nxopen.PointList
Finds the index where the input object appears.
findIndex(RegionPoint) - Method in interface nxopen.RegionPointList
Finds the index where the input object appears.
findIndex(RunItemsBuilder) - Method in interface nxopen.routing.RunItemsBuilderList
Finds the index where the input object appears.
findIndex(ScCollector) - Method in interface nxopen.ScCollectorList
Finds the index where the input object appears.
findIndex(Section) - Method in interface nxopen.SectionList
Finds the index where the input object appears.
findIndex(KinematicChain) - Method in interface nxopen.sim.KinematicChainList
Finds the index where the input object appears.
findIndex(KinematicJunctionBuilder) - Method in interface nxopen.sim.KinematicJunctionBuilderList
Finds the index where the input object appears.
findIndex(TaggedObject) - Method in interface nxopen.TaggedObjectList
Finds the index where the input object appears.
findIndex(SelectReuseLibraryListItemBuilder) - Method in interface nxopen.tooling.SelectReuseLibraryListItemBuilderList
Finds the index where the input object appears.
findIndex(ShimInnerProfileSetBuilder) - Method in interface nxopen.tooling.ShimInnerProfileSetBuilderList
Finds the index where the input object appears.
findIndex(JointItemBuilder) - Method in interface nxopen.weld.JointItemBuilderList
Finds the index where the input object appears.
findIndex(JointmarkFaceSetsBuilder) - Method in interface nxopen.weld.JointmarkFaceSetsBuilderList
Finds the index where the input object appears.
findIndex(JointmarkGuideBuilder) - Method in interface nxopen.weld.JointmarkGuideBuilderList
Finds the index where the input object appears.
findIndex(JointmarkPointsBuilder) - Method in interface nxopen.weld.JointmarkPointsBuilderList
Finds the index where the input object appears.
findIndex(WeldBeadPathBuilder) - Method in interface nxopen.weld.WeldBeadPathBuilderList
Finds the index where the input object appears.
findIndex(WeldBeadSizeBuilder) - Method in interface nxopen.weld.WeldBeadSizeBuilderList
Finds the index where the input object appears.
findIndex(WeldFillStripBuilder) - Method in interface nxopen.weld.WeldFillStripBuilderList
Finds the index where the input object appears.
findIntersection() - Method in interface nxopen.tooling.PocketBuilder
Finds the intersected components to create pocket
License requirements: None.
findItem(int) - Method in interface nxopen.annotations.ArbitraryAreaSeedBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.annotations.DatumReferenceBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.annotations.LeaderDataList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.annotations.MasterSymbolListItemBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.annotations.SymbolCatalogParameterBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.annotations.TitleBlockCellBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.assemblies.PartitionList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.BodyList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.cae.DependentMeshListItemBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.cae.ManualSweepBetweenListItemSelectionList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.cae.MeshManualSweepBetweenListItemSelectionList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.cam.BoundaryMemberSetList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.cam.BoundarySetList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.cam.BoundaryTurnVariableStockSetList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.cam.CAMFeatureList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.cam.CollisionPairBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.cam.CustomLoopSetList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.cam.CutVolumeList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.cam.DriveChainItemBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.cam.GeometrySetList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.cam.HoldingSystemBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.cam.HoleBossSetList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.cam.InPathEventDataBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.cam.LaserControlPointList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.cam.ManualFeatureBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.cam.SplitterList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.cam.SurfaceDriveGeometrySetList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.cam.TabPointDataBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.cam.ThreadedBossSetList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.cam.ThreadedHoleSetList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.cam.ToolPathSplitItemBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.cam.UdeList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.cam.WedmCustomBoundaryDataBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.cam.WireGuideList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.DateItemBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.die.DieAssistantFlangeProfileList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.die.DieAssistantTrimProfileList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.die.DieBooleanBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.die.DieLimitsBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.die.DieLocationBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.die.DrawBeadSegmentBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.die.PierceItemBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.drafting.AttributeItemBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.drafting.PrimaryContentItemBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.drawings.SectionLineSegmentBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.drawings.SectionLineSegmentPointListBuilder
Returns SectionLineSegmentPointBuilder object at the input index.
findItem(int) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.drawings.ViewStyleShipbuildingLinesBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.ExpressionCollectorSetList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.ExpressionSectionSetList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.features.GeometricConstraintDataManager
Returns GeometricConstraintData object at the input index.
findItem(int) - Method in interface nxopen.features.GlobalShapingCurveOffsetBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.features.GlobalShapingPointOffsetBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.features.PartGeometryCopySelectBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.features.PointSetFacePercentageBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.features.sheetmetal.SMBoundaryConditionBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.features.shipdesign.AnchorPointList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.features.shipdesign.BulkHeadListItemBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.features.shipdesign.CornerCutListItemBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.features.shipdesign.DeckListItemBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.features.shipdesign.ItFrameListItemBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.features.shipdesign.OrientationRegionItemBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.features.shipdesign.PlaneListBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.features.shipdesign.SeamBlockBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.features.shipdesign.SectionViewBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.features.shipdesign.ShipNamesBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.features.shipdesign.StandardPartItemBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.features.shipdesign.SteelInsulationBoundaryBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.features.shipdesign.SubSystemBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.features.shipdesign.TransFrameListItemBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.features.SmoothRangeBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.features.subdivision.CageSectionDataList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.features.VariableRadiusPointsBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.features.vehicledesign.CloseRangeCameraListItemBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.features.vehicledesign.CloseRangeDemoCylinderListItemBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.fields.PathObjectsList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.geometricutilities.BlendSetbackBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.geometricutilities.BoundaryDefinitionBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.geometricutilities.BoundingObjectBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.geometricutilities.EntityUsageInfoList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.geometricutilities.FaceSetOffsetList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.geometricutilities.FtmFixedCurvesBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.geometricutilities.FtmTransformCurvesBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.geometricutilities.FtmTransformPointsBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.geometricutilities.InstanceEditedExpressionItemList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.geometricutilities.ParentEquivalencyMapList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.geometricutilities.PatternIncrementItemList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.geometricutilities.PatternSpacingsListItemList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusFaceGroupBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.geometricutilities.RotationSetBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.geometricutilities.ScalingSetBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.geometricutilities.SelectionListList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.geometricutilities.StyledSweepDoubleOnPathDimBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.geometricutilities.TransitionCurveBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.geometricutilities.TransitionLawNodeBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.geometricutilities.TwoExpressionsCollectorSetList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.geometricutilities.TwoExpressionsSectionSetList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.ListCreatorList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.mechatronics.GanttOperationConditionBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.mechatronics.GanttOperationParameterBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.mechatronics.PathConstraintFrameBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.mechatronics.ProxyObjectParameterBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.mechatronics.RuntimeFormulaParameterBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.mechatronics.SignalConnectionBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.motion.SignalChartListItemList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.NXObjectList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.ObjectList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.PlaneList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.PointList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.RegionPointList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.routing.RunItemsBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.ScCollectorList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.SectionList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.sim.KinematicChainList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.sim.KinematicJunctionBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.TaggedObjectList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.tooling.SelectReuseLibraryListItemBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.tooling.ShimInnerProfileSetBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.weld.JointItemBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.weld.JointmarkFaceSetsBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.weld.JointmarkGuideBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.weld.JointmarkPointsBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.weld.WeldBeadPathBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.weld.WeldBeadSizeBuilderList
Returns the object at the input index.
findItem(int) - Method in interface nxopen.weld.WeldFillStripBuilderList
Returns the object at the input index.
findJunction(String) - Method in interface nxopen.sim.KinematicConfigurator
Find the junction with the given name
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
findJunction(NXObject) - Method in interface nxopen.sim.KinematicConfigurator
Finds a junction by its coordinate system
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
findMapping() - Method in interface nxopen.formboard.UpdateFormboardBuilder
Compute the mapping between the data in the formboard and the data in the 3D harness.
findMatchingParts() - Method in interface nxopen.routing.electrical.ConnectorDevice
Find parts matching the connector device.
findMesh(Tag, UFSf.MeshDimension) - Method in interface nxopen.uf.UFSf
Refer to UF_SF_find_mesh for documentation.
FindMeshData() - Constructor for class nxopen.uf.UFSf.FindMeshData
 
findMinimumDistance(Tag, Tag) - Method in interface nxopen.uf.UFSf
Refer to UF_SF_find_minimum_distance for documentation.
FindMinimumDistanceData() - Constructor for class nxopen.uf.UFSf.FindMinimumDistanceData
 
findMoldUnsplitFace() - Method in interface nxopen.tooling.FaceSplitBuilder
Set the reference point to the selected face center.
findNamedReachZone(String) - Method in interface nxopen.features.Human
Find HumanReachZone in a human feature by reach zone name
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")

Created in NX4.0.0
findNearestCableDevice() - Method in interface nxopen.routing.electrical.ConnectorDevice
Get the nearest CableDevice encountered up the parent-child hierarchy.
findNearestHarnessDefinition() - Method in interface nxopen.routing.electrical.ElectricalStockDevice
Get nearest HarnessDefinition encountered up the parent-child hierarchy.
findNearestHarnessDevice() - Method in interface nxopen.routing.electrical.ConnectorDevice
Get the nearest HarnessDevice encountered up the parent-child hierarchy.
findNearestHarnessDevice() - Method in interface nxopen.routing.electrical.ElectricalStockDevice
Find the nearest HarnessDevice encountered up the parent-child hierarchy.
findNumberOfInterferenceRegions() - Method in interface nxopen.weld.AutoPointBuilder
Finds all the interference areas between the selected components.
findObject(String) - Method in interface nxopen.annotations.BusinessModifierCollection
Finds the BusinessModifier with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.annotations.CenterlineCollection
Finds the Centerline with the given name.
findObject(String) - Method in interface nxopen.annotations.CustomSymbolCollection
Finds the MasterSymbol with the given name.
findObject(String) - Method in interface nxopen.annotations.DraftingDatumTargetCollection
Finds the drafting datum target with the given name.
findObject(String) - Method in interface nxopen.annotations.DraftingImageCollection
Finds the drafting image with the given name.
findObject(String) - Method in interface nxopen.annotations.DraftingSurfaceFinishCollection
Finds the drafting surface finish with the given name.
findObject(String) - Method in interface nxopen.annotations.FrameBarCollection
Finds the frame bar with the given name.
findObject(String) - Method in interface nxopen.annotations.IntersectionSymbolCollection
Finds the intersection symbol with the given name.
findObject(String) - Method in interface nxopen.annotations.OffsetCenterPointCollection
Finds the offset center point with the given name.
findObject(String) - Method in interface nxopen.annotations.PartSymbolFolderCollection
Finds the PartSymbolFolder with the given name.
findObject(String) - Method in interface nxopen.annotations.PmiAttributeCollection
Finds the PmiAttribute with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.annotations.PmiLightweightSectionCollection
Finds the lightweight section with the given name.
findObject(String) - Method in interface nxopen.annotations.SymbolFileCollection
Finds the SymbolFile with the given name.
findObject(String) - Method in interface nxopen.annotations.TableSectionCollection
Finds the table section with the given name.
findObject(String) - Method in interface nxopen.annotations.TargetPointCollection
Finds the target point with the given name.
findObject(String) - Method in interface nxopen.ArcCollection
Finds the Arc with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.assemblies.ArrangementCollection
Finds the Arrangement with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.assemblies.ClearanceSetCollection
Finds the ClearanceSet with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.assemblies.ComponentPatternCollection
Finds the ComponentPattern with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.assemblies.ExplosionCollection
Finds the Explosion with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.assemblies.OrderCollection
Finds the Order with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.assemblies.productinterface.Collection
Find the Product Interface Object with input name
License requirements: None.
findObject(String) - Method in interface nxopen.assemblies.SearchResultCollection
Finds the SearchResultElement with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.assemblies.SubsetBuilder
Finds the NXObject with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.assemblies.SubsetRecipe
Finds the SearchTerm with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.BodyCollection
Finds the Body with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.cae.AdaptivityExclusionZoneCollection
Finds a adaptivity meta solution with a specified name.
findObject(String) - Method in interface nxopen.cae.AdaptivityMetaSolutionCollection
Finds an adaptivity meta solution with a specified name.
findObject(String) - Method in interface nxopen.cae.BeamSectionCollection
Finds the BeamSection with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.cae.BoltCollection
Finds the Bolt with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.cae.CaeDOFSetCollection
Finds the CaeDOFSet with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.cae.CaeRegionCollection
Finds the CAE.CaeRegion with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.cae.CfdContactPreventionConstraintCollection
Finds the CAE.CfdContactPreventionConstraint with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.cae.CfdLocalResolutionConstraintCollection
Finds the CAE.CfdLocalResolutionConstraint with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.cae.CorrelSolutionCollection
Finds a correl meta solution with specified solution name
License requirements: None.
findObject(String) - Method in interface nxopen.cae.DurabilityAxisSearchCollection
Finds an stress axes with a specified name.
findObject(String) - Method in interface nxopen.cae.DurabilityEventCollection
Finds a durability event with a specified name.
findObject(String) - Method in interface nxopen.cae.DurabilityExcitationCollection
Finds a durability excitation with a specified name.
findObject(String) - Method in interface nxopen.cae.DurabilityFatigueCollection
Finds an event fatigue settings with a specified name.
findObject(String) - Method in interface nxopen.cae.DurabilityMetaSolutionCollection
Finds a durability meta solution with a specified name.
findObject(String) - Method in interface nxopen.cae.DurabilityRandomFatigueCollection
Finds an event fatigue settings with a specified name.
findObject(String) - Method in interface nxopen.cae.DurabilitySolveOptionsCollection
Finds an event override with a specified name.
findObject(String) - Method in interface nxopen.cae.DurabilityStrengthCollection
Finds an event strength settings with a specified name.
findObject(String) - Method in interface nxopen.cae.FluidDomainCollection
Finds the FluidDomainRecipe with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.cae.FunctionCollection
Finds the Function with the given name.
findObject(String) - Method in interface nxopen.cae.GeometryRecipeCollection
Finds the GeometryRecipe with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.cae.IMeshManager
Finds the Mesh with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.cae.LaminateDynamicEventCollection
Finds a laminate dynamic event with the specified name
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
findObject(String) - Method in interface nxopen.cae.LaminateDynamicSimCollection
Finds a laminate dynamic sim with the specified name
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
findObject(String) - Method in interface nxopen.cae.LaminateExtrudeSetupCollection
Finds the LaminateExtrudeSetup with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.cae.LaminateGlobalLayupCollection
Finds the LaminateGlobalLayup with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.cae.LaminateLayupOffsetCollection
Finds the LaminateLayupOffset with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.cae.LaminateMatOrientationCollection
Finds the LaminateMatOrientation with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.cae.LaminateModePropertyCollection
Finds a laminate mode property with the specified name
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
findObject(String) - Method in interface nxopen.cae.LaminatePlyCollection
Finds the LaminatePly with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.cae.MeshControlCollection
Finds the Mesh with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.cae.MeshPointCollection
Finds the MeshPoint with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.cae.modelcheck.ElementQualitySettingCollection
Finds the ElementQualitySetting with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.cae.ModelUpdateDesignVariablesCollection
Finds a design variable event with a specified label.
findObject(String) - Method in interface nxopen.cae.ModelUpdateSolutionCollection
Finds a model update meta solution with specified solution name
License requirements: None.
findObject(String) - Method in interface nxopen.cae.optimization.DAOConstraintCollection
Finds an optimization solution design constraint with a specified name
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
findObject(String) - Method in interface nxopen.cae.optimization.DAODesignVariableCollection
Finds an optimization solution design variable with a specified name
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
findObject(String) - Method in interface nxopen.cae.optimization.DAOSolutionCollection
Finds an optimization solution with a specified name
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
findObject(String) - Method in interface nxopen.cae.optimization.TBSConstraintCollection
Finds a response constraint with the specified name within an optimization solution
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
findObject(String) - Method in interface nxopen.cae.optimization.TBSDesignVariableCollection
Finds a design variable object with specified name in an optimization solution
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
findObject(String) - Method in interface nxopen.cae.optimization.TBSOptimizationSolutionCollection
Finds an optimization solution with specified name
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
findObject(String) - Method in interface nxopen.cae.optimization.TBSRestrictAreaCollection
Finds a restrict area with the specified name within an optimization solution
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
findObject(String) - Method in interface nxopen.cae.optimization.TBSSmoothCollection
Finds a smooth object with specified name within an optimization solution
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
findObject(String) - Method in interface nxopen.cae.PreTestExciterConfigCollection
Finds a exciter selection configuration with specified name
License requirements: None.
findObject(String) - Method in interface nxopen.cae.PreTestExciterSelectionDofSetCollection
Finds a exciter selection configuration with specified name
License requirements: None.
findObject(String) - Method in interface nxopen.cae.PreTestSensorConfigCollection
Finds a sensor selection configuration with specified name
License requirements: None.
findObject(String) - Method in interface nxopen.cae.PreTestSensorSelectionDofSetCollection
Finds a sensor selection configuration with specified name
License requirements: None.
findObject(String) - Method in interface nxopen.cae.PreTestSolutionCollection
Finds a pre-test setup with specified name
License requirements: None.
findObject(String) - Method in interface nxopen.cae.responsesimulation.ExcitationCollection
Finds an excitation with specified excitation name
License requirements: nx_response_anlys ("NX Response Analysis")
.
findObject(String) - Method in interface nxopen.cae.responsesimulation.RSEventCollection
Finds an event with specified event name
License requirements: nx_response_anlys ("NX Response Analysis")
.
findObject(String) - Method in interface nxopen.cae.responsesimulation.SensorCollection
Finds an sensor with specified event name
License requirements: nx_response_anlys ("NX Response Analysis")
.
findObject(String) - Method in interface nxopen.cae.responsesimulation.SolutionCollection
Finds a response analysis meta solution with specified solution name
License requirements: nx_response_anlys ("NX Response Analysis")
.
findObject(String) - Method in interface nxopen.cae.responsesimulation.StrainGageCollection
Finds an strain gage with specified gage name
License requirements: nx_response_anlys ("NX Response Analysis")
.
findObject(String) - Method in interface nxopen.cae.ResultManager
Returns a Result
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Created in NX7.5.1
findObject(String) - Method in interface nxopen.cae.SimConstraintCollection
Finds the SimConstraint with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.cae.SimLbcFolderCollection
Finds the SimLbcFolder with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.cae.SimLoadCollection
Finds the SimLoad with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.cae.SimLoadSetCollection
Finds the SimLoadSet with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.cae.SimRecipeCollection
Finds the SimRecipe with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.cae.SimSimulationObjectCollection
Finds the SimSimulationObject with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.cae.SketchCurvesCollection
Finds the SketchCurves with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.cam.CAMAttributeCollection
Finds the CAM.CAMAttribute object with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.cam.CAMFeatureCollection
Finds the CAM.CAMFeature object with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.cam.InspectionMoveCollection
Finds the CAM.InspectionMoveSubop object with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.cam.InspectionMoveSubopCollection
Finds the CAM.InspectionMoveSubop object with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.cam.InspectionOperationCollection
Finds the InspectionOperation object with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.cam.InspectionTrackPointCollection
Finds the CAM.InspectionTrackPoint object with the given identifier.
findObject(String) - Method in interface nxopen.cam.MoveCollection
Finds the CAM.Operation object with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.cam.OperationCollection
Finds the CAM.Operation object with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.cam.TrackPointCollection
Finds the CAM.TrackPoint object with the given identifier.
findObject(String) - Method in interface nxopen.CollaborativeDesignCollection
Finds the CollaborativeDesign with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.CutViewCollection
Finds the CutView with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.DatumCollection
Finds the datum with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.display.CameraCollection
Finds the Camera with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.display.DynamicSectionCollection
Finds the DynamicSection with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.display.GridCollection
Finds the Grid with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.display.ImageCollection
Finds the ImageBase with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.display.ImageDataCollection
Finds the ImageData with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.display.TrueShadingCollection
Finds the TrueShading with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.display.TrueStudioCollection
Finds the TrueStudio with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.drawings.BordersAndZonesCollection
Finds the BordersAndZones with the given name.
findObject(String) - Method in interface nxopen.drawings.DraftingBodyCollection
Finds the DraftingBody with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.drawings.DraftingCurveCollection
Finds the DraftingCurve with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.drawings.DraftingViewCollection
Finds the DraftingView with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.drawings.DrawingRegionCollection
Finds the DrawingRegion with the given name.
findObject(String) - Method in interface nxopen.drawings.SheetDraftingViewCollection
Finds the DraftingView with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.drawings.ViewAlignmentCollection
Finds the ViewAlignment with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.drawings.ViewBreakCollection
Finds the DraftingView with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.ExpressionCollection
Finds the Expression with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.facet.FacetedBodyCollection
Finds the FacetedBody with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.features.FeatureCollection
Finds the nxopen.features with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.features.shipdesign.PenetrationRequestCollection
Finds the NXObject with the given name.
findObject(String) - Method in interface nxopen.InfiniteLineCollection
Finds the InfiniteLine with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.INXObject
Finds the NXObject with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.issue.IssueListCollection
Finds the IssueList with the given name.
findObject(String) - Method in interface nxopen.layer.CategoryCollection
Finds the Category with the given name.
findObject(String) - Method in interface nxopen.layout2d.ComponentCollection
Finds the Component with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.layout2d.ComponentDefinitionCollection
Finds the ComponentDefinition with the given name.
findObject(String) - Method in interface nxopen.layout2d.LocalDefinitionFolderCollection
Finds the LocalDefinitionFolder with the given name.
findObject(String) - Method in interface nxopen.LayoutCollection
Finds the Layout with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.LightCollection
Finds the Light with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.LineCollection
Finds the Line with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.markup.MarkupFileCollection
Finds the nxopen.Markup.File with the given id.
findObject(String) - Method in interface nxopen.markup.MarkupFileObjectCollection
Finds the nxopen.Markup.MarkupObject with the given id in current file.
findObject(String) - Method in interface nxopen.markup.MarkupObjectCollection
Finds the nxopen.Markup.MarkupObject with the given id.
findObject(String) - Method in interface nxopen.mechatronics.AdapterFormulaCollection
Finds the AdapterFormula with the given name.
findObject(String) - Method in interface nxopen.mechatronics.AdapterSignalCollection
Finds the AdapterSignal with the given name.
findObject(String) - Method in interface nxopen.mechatronics.AngularLimitJointCollection
Finds the AngularLimitJoint with the given name.
findObject(String) - Method in interface nxopen.mechatronics.AngularSpringJointCollection
Finds the AngularSpringJoint with the given name.
findObject(String) - Method in interface nxopen.mechatronics.BallJointCollection
Finds the BallJoint with the given name.
findObject(String) - Method in interface nxopen.mechatronics.BreakingConstraintCollection
Finds the BreakingConstraint with the given name.
findObject(String) - Method in interface nxopen.mechatronics.CamCollection
Finds the Cam with the given name.
findObject(String) - Method in interface nxopen.mechatronics.CamProfileCollection
Finds the CamProfile with the given name.
findObject(String) - Method in interface nxopen.mechatronics.ChangeMaterialCollection
Finds the ChangeMaterial with the given name.
findObject(String) - Method in interface nxopen.mechatronics.CollisionBodyCollection
Finds the CollisionBody with the given name.
findObject(String) - Method in interface nxopen.mechatronics.CollisionMaterialCollection
Finds the CollisionMaterial with the given name.
findObject(String) - Method in interface nxopen.mechatronics.CollisionSensorCollection
Finds the CollisionSensor with the given name.
findObject(String) - Method in interface nxopen.mechatronics.CurveOnCurveJointCollection
Finds the CurveOnCurveJoint with the given name.
findObject(String) - Method in interface nxopen.mechatronics.CylindricalJointCollection
Finds the CylindricalJoint with the given name.
findObject(String) - Method in interface nxopen.mechatronics.DisplayChangerCollection
Finds the DisplayChanger with the given name.
findObject(String) - Method in interface nxopen.mechatronics.ElectricalPartCollection
Finds the ElectricalPart object with the given name.
findObject(String) - Method in interface nxopen.mechatronics.FixedJointCollection
Finds the FixedJoint with the given name.
findObject(String) - Method in interface nxopen.mechatronics.FunctionObjectCollection
Finds the FunctionObject object with the given name.
findObject(String) - Method in interface nxopen.mechatronics.GanttCollection
Finds the GanttOperationObject with the given name.
findObject(String) - Method in interface nxopen.mechatronics.GanttLinkerCollection
Finds the GanttLinker with the given name.
findObject(String) - Method in interface nxopen.mechatronics.GearCollection
Finds the Gear with the given name.
findObject(String) - Method in interface nxopen.mechatronics.GraphControlCollection
Finds the GraphControl with the given name.
findObject(String) - Method in interface nxopen.mechatronics.HingeJointCollection
Finds the HingeJoint with the given name.
findObject(String) - Method in interface nxopen.mechatronics.LinearLimitJointCollection
Finds the LinearLimitJoint with the given name.
findObject(String) - Method in interface nxopen.mechatronics.LinearSpringJointCollection
Finds the LinearSpringJoint with the given name.
findObject(String) - Method in interface nxopen.mechatronics.LogicObjectCollection
Finds the LogicObject object with the given name.
findObject(String) - Method in interface nxopen.mechatronics.MotionProfileCollection
Finds the MotionProfile with the given name.
findObject(String) - Method in interface nxopen.mechatronics.ObjectSinkCollection
Finds the ObjectSink with the given name.
findObject(String) - Method in interface nxopen.mechatronics.ObjectSourceCollection
Finds the ObjectSource with the given name.
findObject(String) - Method in interface nxopen.mechatronics.ObjectTransformerCollection
Finds the ObjectTransformer with the given name.
findObject(String) - Method in interface nxopen.mechatronics.PathConstraintJointCollection
Finds the PathConstraintJoint with the given name.
findObject(String) - Method in interface nxopen.mechatronics.PhysicsPreferenceCollection
Finds the PhysicsPreference with the given name.
findObject(String) - Method in interface nxopen.mechatronics.PMNavFolderLocatorCollection
Finds the PMNavFolderLocator object with the given name.
findObject(String) - Method in interface nxopen.mechatronics.PMNavFolderObjectCollection
Finds the PMNavFolderObject object with the given name.
findObject(String) - Method in interface nxopen.mechatronics.PointOnCurveJointCollection
Finds the PointOnCurveJoint with the given name.
findObject(String) - Method in interface nxopen.mechatronics.PositionControlCollection
Finds the PositionControl with the given name.
findObject(String) - Method in interface nxopen.mechatronics.PreventCollisionCollection
Finds the PreventCollision with the given name.
findObject(String) - Method in interface nxopen.mechatronics.ProxyObjectCollection
Finds the ProxyObject with the given name.
findObject(String) - Method in interface nxopen.mechatronics.ProxyOverrideObjectCollection
Finds the ProxyOverrideObject with the given name.
findObject(String) - Method in interface nxopen.mechatronics.ReadWriteDeviceCollection
Finds the ReadWriteDeviceObject with the given name.
findObject(String) - Method in interface nxopen.mechatronics.RequirementCollection
Finds the Requirement object with the given name.
findObject(String) - Method in interface nxopen.mechatronics.RigidBodyCollection
Finds the RigidBody with the given name.
findObject(String) - Method in interface nxopen.mechatronics.RuntimeBehaviorCollection
Finds the RuntimeBehavior with the given name.
findObject(String) - Method in interface nxopen.mechatronics.RuntimeFormulaCollection
Finds the RuntimeFormula with the given name.
findObject(String) - Method in interface nxopen.mechatronics.RuntimeNCCollection
Finds the RuntimeNCObject with the given name.
findObject(String) - Method in interface nxopen.mechatronics.SignalAdapterCollection
Finds the SignalAdapter with the given name.
findObject(String) - Method in interface nxopen.mechatronics.SlidingJointCollection
Finds the SlidingJoint with the given name.
findObject(String) - Method in interface nxopen.mechatronics.SpeedControlCollection
Finds the SpeedControl with the given name.
findObject(String) - Method in interface nxopen.mechatronics.SpringDamperCollection
Finds the SpringDamper with the given name.
findObject(String) - Method in interface nxopen.mechatronics.TagFormCollection
Finds the TagFormObject with the given name.
findObject(String) - Method in interface nxopen.mechatronics.TransportSurfaceCollection
Finds the TransportSurface with the given name.
findObject(String) - Method in interface nxopen.mechatronics.VirtualAxisCollection
Finds the nxopen.mechatronics.VirtualAxis with the given name.
findObject(String) - Method in interface nxopen.ModelingViewCollection
Finds the ModelingView with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.motion.BodyContactCollection
Finds the BodyContact with the given name.
findObject(String) - Method in interface nxopen.motion.BushingCollection
Finds the Bushing with the given name.
findObject(String) - Method in interface nxopen.motion.CouplerCollection
Finds a coupler with the given name.
findObject(String) - Method in interface nxopen.motion.CurveContactCollection
Finds the CurveContact with the given name.
findObject(String) - Method in interface nxopen.motion.CurveOnCurveCollection
Finds the CurveOnCurve with the given name.
findObject(String) - Method in interface nxopen.motion.DamperCollection
Finds the Damper with the given name.
findObject(String) - Method in interface nxopen.motion.FlexBodyCollection
Finds the FlexBody with the given name.
findObject(String) - Method in interface nxopen.motion.GeneralCouplerCollection
Finds the GeneralCoupler with the given name.
findObject(String) - Method in interface nxopen.motion.JointCollection
Finds the Joint with the given name.
findObject(String) - Method in interface nxopen.motion.JointDriverCollection
Finds the JointDriver with the given name.
findObject(String) - Method in interface nxopen.motion.LinkCollection
Finds the Link with the given name.
findObject(String) - Method in interface nxopen.motion.LoadTransferCollection
Finds the LoadTransfer with the given name.
findObject(String) - Method in interface nxopen.motion.MarkerCollection
Finds the Marker with the given name.
findObject(String) - Method in interface nxopen.motion.MotionSensorCollection
Finds the MotionSensor with the given name.
findObject(String) - Method in interface nxopen.motion.MotionSolutionCollection
Finds the MotionSolution object with the given name.
findObject(String) - Method in interface nxopen.motion.PackagingCollection
Finds the Packaging object with the given name.
findObject(String) - Method in interface nxopen.motion.PlantInputCollection
Finds the PlantInput with the given name.
findObject(String) - Method in interface nxopen.motion.PlantOutputCollection
Finds the PlantOutput with the given name.
findObject(String) - Method in interface nxopen.motion.PMDCMotorCollection
Finds the PMDCMotor with the given name.
findObject(String) - Method in interface nxopen.motion.PointOnCurveCollection
Finds the PointOnCurve with the given name.
findObject(String) - Method in interface nxopen.motion.PointOnSurfaceCollection
Finds the PointOnSurface with the given name.
findObject(String) - Method in interface nxopen.motion.ScalarForceCollection
Finds the ScalarForce with the given name.
findObject(String) - Method in interface nxopen.motion.ScalarTorqueCollection
Finds the ScalarTorque with the given name.
findObject(String) - Method in interface nxopen.motion.SignalChartCollection
Finds the SignalChart with the given name.
findObject(String) - Method in interface nxopen.motion.SpringCollection
Finds the Spring with the given name.
findObject(String) - Method in interface nxopen.motion.VectorForceCollection
Finds the VectorForce with the given name.
findObject(String) - Method in interface nxopen.motion.VectorTorqueCollection
Finds the VectorTorque with the given name.
findObject(String) - Method in interface nxopen.NXMatrixCollection
Finds an NXMatrix with the given identifier as recorded in a journal
License requirements: None.
findObject(String) - Method in interface nxopen.PartCollection
Finds the BasePart with the given name.
findObject(String) - Method in interface nxopen.pdm.AttributeGroupDescriptionCollection
Finds the AttributeGroupDescription with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.PhysicalMaterialCollection
Finds the PhysicalMaterial with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.PointCollection
Finds the Point with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.PolylineCollection
Finds the Polyline with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.sim.KinematicComponentCollection
Finds the SIM.KinematicComponent object with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.SketchCollection
Finds the Sketch with the given name.
findObject(String) - Method in interface nxopen.SplineCollection
Finds the Spline with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.tooling.BendOperationCollection
Finds the BendOperationBuilder with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.tooling.IntermediateStageCollection
Finds the IntermediateStageBuilder with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.UnitCollection
Finds the Unit with the given identifier as recorded in a journal.
findObject(String) - Method in interface nxopen.userdefinedtemplate.Collection
Find the Product Interface Object with input name
License requirements: None.
findObject(String) - Method in interface nxopen.validate.RequirementCollection
Finds the Requirement with the given identifier.
findObject(String) - Method in interface nxopen.ViewCollection
Finds the View with the given identifier as recorded in a journal.
findOccurrence(NXObject) - Method in interface nxopen.assemblies.Component
Given a prototype object, returns the corresponding occurrence in this component
License requirements: None.
findOccurrence(Tag, Tag) - Method in interface nxopen.uf.UFAssem
Refer to UF_ASSEM_find_occurrence for documentation.
findOpenings(boolean) - Method in interface nxopen.features.PatchOpeningsBuilder
Find all valid openings based upon input faces.
findOrientation() - Method in interface nxopen.features.shipdesign.ProfileCutoutBuilder
This method will find out the profile cutout orientation.
findOwnerOfJunction(KinematicJunction) - Method in interface nxopen.sim.KinematicConfigurator
Finds the KinematicComponent which is the owner of this junction
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")

Created in NX7.5.0
findParentComponent(KinematicComponent) - Method in interface nxopen.sim.KinematicConfigurator
Finds the KinematicComponent which is the parent of this component
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")

Created in NX7.5.0
findParser(String) - Method in interface nxopen.validate.ValidationManager
Finds parsers in current session.
findPartInPath(String) - Method in interface nxopen.uf.UFRoute
Refer to UF_ROUTE_find_part_in_path for documentation.
findPartNode(int) - Method in interface nxopen.validate.Validator
Finds a part node
License requirements: None.
findPath(NXObject[], NXObject[]) - Method in interface nxopen.routing.RunCollection
Find a run path connecting all input From items to the To items.
findPath(Tag, Tag) - Method in interface nxopen.uf.UFRoute
Refer to UF_ROUTE_find_path for documentation.
FindPathData() - Constructor for class nxopen.uf.UFRoute.FindPathData
 
findPathsFromMultiplePoints(Point[]) - Method in interface nxopen.routing.ManualRouteBuilder
This function returns all possible paths which are passing through all the given points.
FindPathsFromMultiplePointsData() - Constructor for class nxopen.routing.ManualRouteBuilder.FindPathsFromMultiplePointsData
 
findPlacer() - Method in interface nxopen.routing.electrical.ConnectorDevice
Searches for a placement port for the connector device.
FindPlacerData() - Constructor for class nxopen.routing.electrical.ConnectorDevice.FindPlacerData
 
findPortsInParts(Part[]) - Method in interface nxopen.weld.WeldJointBuilder
Gets ports from the parts.
findPrev16AlignsToCheck(Tag, boolean) - Method in interface nxopen.uf.UFAssem
Refer to UF_ASSEM_find_prev16_aligns_to_check for documentation.
FindPrev16AlignsToCheckData() - Constructor for class nxopen.uf.UFAssem.FindPrev16AlignsToCheckData
 
findProductAssemblies(int, Tag[]) - Method in interface nxopen.uf.UFUgmgr
Refer to UF_UGMGR_find_product_assemblies for documentation.
findReferencers(String, boolean) - Method in interface nxopen.cae.GRMSearch
Find CAE Objects.
findRelationCurve(NXObject[]) - Method in interface nxopen.features.CurveFinderBuilder
Finds relation curves
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
findRoutedStockDevices() - Method in interface nxopen.routing.electrical.ConnectorDevice
Find routed stock devices.
findScopeCurve(NXObject[]) - Method in interface nxopen.features.CurveFinderBuilder
Finds relation curves in the scope
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
findScopeOption() - Method in interface nxopen.features.CurveFinderBuilder
Returns a value that indicates which find scope option is
License requirements: None.
findSelectedReachZone(NXObject) - Method in interface nxopen.features.Human
Find the selected HumanReachZone for human feature
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")

Created in NX4.0.0
findSideSegments() - Method in interface nxopen.routing.BendCorner
Returns the straight line segments attached to the fillet curve of this bend corner.
findSideSegments() - Method in interface nxopen.routing.MiteredBendCorner
Returns the straight line segments attached to the fillet curve of this bend corner.
findStockDevices() - Method in interface nxopen.routing.electrical.ConnectorDevice
Find stock devices.
findTerminalPort(Tag, String) - Method in interface nxopen.uf.UFRoute
Refer to UF_ROUTE_find_terminal_port for documentation.
findToConnector() - Method in interface nxopen.routing.electrical.ElectricalStockDevice
Find the to connector for this stock device.
findTopmostCableDefinition() - Method in interface nxopen.routing.electrical.ElectricalStockDevice
Get topmost CableDefinition encountered up the parent-child hierarchy.
findUpdated() - Method in interface nxopen.blockstyler.SetList
When an update event occurs on the list, this method finds the item in the list that was updated
License requirements: None.
findValidator(String) - Method in interface nxopen.validate.ValidationManager
Finds validators in current session.
findVioByObjRule(Tag, Tag) - Method in interface nxopen.uf.UFRule
Refer to UF_RULE_find_vio_by_obj_rule for documentation.
FINE - Static variable in class nxopen.cae.ModelDisplayBuilder.ElmDispQuality
Fine
FINE - Static variable in class nxopen.cam.Preferences.AnimationAccuracyTypes
Fine
FINE - Static variable in class nxopen.cam.SimulationOptionsBuilder.Accuracy
use fine accuracy
FINE - Static variable in class nxopen.cam.SimulationOptionsBuilder.Resolution
use fine resolution
FINE - Static variable in class nxopen.die.CompensateRoughDataBuilder.ApproximationType
Perform a fine approximation.
FINE - Static variable in class nxopen.display.FacetSettingsBuilder.AdvVisToleranceSetting
 
FINE - Static variable in class nxopen.display.FacetSettingsBuilder.ShadedToleranceSetting
 
FINE - Static variable in class nxopen.drawings.ViewCreationWizardBuilder.ResolutionOption
view display quality Fine
FINE - Static variable in class nxopen.fields.DisplayPropertiesBuilder.DispResolutionEnum
 
FINE - Static variable in class nxopen.geometricanalysis.HighlightLinesAnalysisBuilder.Resolutions
Fine
FINE - Static variable in class nxopen.ListCreator.ResolutionType
Fine
FINE - Static variable in class nxopen.preferences.GeneralToleranceOption
Fine
FINE - Static variable in class nxopen.preferences.GeneralViewQualityOption
Fine
FINE - Static variable in class nxopen.preferences.PartModeling.GridResolutionType
Fine grid resolution
FINE - Static variable in class nxopen.preferences.PartVisualizationShade.AdvViewToleranceType
Fine
FINE - Static variable in class nxopen.preferences.PartVisualizationShade.ShadedViewToleranceType
For Fine: Facet Edge Tolerance is 0.0005, Facet Chord Tolerance is 0.0025, and Angular Tolerance is 6
FINE - Static variable in class nxopen.preferences.SessionModeling.PreviewResolutionType
 
FINE - Static variable in class nxopen.preferences.SessionVisualizationHighQualityImage.PlotQualityType
 
FINE - Static variable in class nxopen.preferences.ShadingToleranceOption
Fine
FINE - Static variable in class nxopen.STLImporter.AngularToleranceType
Import with fine angular tolerance.
FINE - Static variable in class nxopen.VRMLImporter.AngularToleranceType
Import with fine angular tolerance.
fineFinishCorner1() - Method in interface nxopen.cam.BoundaryTurnMemberSet
Returns the fine finish corner 1
License requirements: None.
fineFinishCorner2() - Method in interface nxopen.cam.BoundaryTurnMemberSet
Returns the fine finish corner 2
License requirements: None.
fineFinishOffset() - Method in interface nxopen.cam.BoundaryTurnMemberSet
Returns the fine finish offset
License requirements: None.
FingerClearanceNotch - Interface in nxopen.die
Represents a die design finger clearance notch feature.
FingerClearanceNotchBuilder - Interface in nxopen.die
Represents a builder that is used to create or edit a FingerClearanceNotch feature.
FingerClearanceNotchBuilder.Types - Class in nxopen.die
Specifies what type of base geometry to build the finger clearance notch from.
finish() - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder
Returns the finish
License requirements: None.
finish() - Method in interface nxopen.annotations.SurfaceFinishBuilder
Returns the finish
License requirements: None.
finish(View) - Method in interface nxopen.display.NonProportionalZoom
Signals the completion of a non-proportional zoom defined by one or more pairs of points defined by a mouse gesture.
finish() - Method in interface nxopen.motion.AnimationControl
Finish animation
License requirements: mechanisms ("MECHANISMS")
.
finish() - Method in interface nxopen.motion.ArticulationControl
Articulation finish
License requirements: mechanisms ("MECHANISMS")
.
finish() - Method in interface nxopen.motion.LoadTransferControl
Closes the load transfer control
License requirements: mechanisms ("MECHANISMS")
.
finish() - Method in interface nxopen.motion.SpreadsheetRunControl
SpreadsheetRun finish
License requirements: mechanisms ("MECHANISMS")
.
FINISH_ALL - Static variable in class nxopen.cam.ProfileStrategy.Types
Profile strategy: Finish All
finishAtSafePlane() - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder
Returns a flag to indicate whether to finish at safe plane after last path
License requirements: None.
FinishDwell - Interface in nxopen.cam
Represents a FinishDwell
Created in NX6.0.0
finishDwell() - Method in interface nxopen.cam.TurnCutParameters
Returns the finish dwell
License requirements: None.
FinishDwell.Types - Class in nxopen.cam
The dwell after finish/profile cut mode options .
FinishMethod - Class in nxopen.annotations
Specifies the weld finish method
finishMethod() - Method in interface nxopen.annotations.LineWeldSideData
Returns the weld finish method
License requirements: None.
finishMethod() - Method in interface nxopen.weld.JointExitBuilder
Returns the weld finish method
License requirements: None.
finishOperation() - Method in interface nxopen.die.FlangeTaskBuilder
Returns the finish operation of the flange task
License requirements: die_engineering ("DIE ENGINEERING")
.
finishOperation() - Method in interface nxopen.die.FormTaskBuilder
Returns the finish operation switch of the form task, if true the form task is a finish operation, if false it is not.
finishOperation() - Method in interface nxopen.die.PierceTaskBuilder
Returns the finish operation of the pierce task True indicates the pierce is to be a finish pierce.
finishOperation() - Method in interface nxopen.die.TrimTaskBuilder
Returns the finish operation of the trim task True indicates the trim is to be a finish trim.
finishOperation() - Method in interface nxopen.tooling.DieEngFormTaskBuilder
Returns the finish operation option.
finishOperation() - Method in interface nxopen.tooling.DieEngTrimTaskBuilder
Returns the finish operation.
finishPasses() - Method in interface nxopen.cam.MillCutParameters
Returns the finish passes
License requirements: None.
finishPasses() - Method in interface nxopen.cam.ThreadCutParameters
Returns the finish passes
License requirements: None.
finishPasses() - Method in interface nxopen.cam.TurnCutParameters
Returns the finish passes
License requirements: None.
finishPasses() - Method in interface nxopen.cam.WedmBasedGeomBuilder
Returns the Finish Passes
License requirements: cam_base ("CAM BASE")
.
FinishPassesBuilder - Interface in nxopen.cam
Represents a FinishPasses Builder
This is an abstract class, and cannot be instantiated.
finishPassesBuilder() - Method in interface nxopen.cam.WedmGeomBuilder
Returns the finish_passes builder
License requirements: cam_base ("CAM BASE")
.
finishPassesBuilder() - Method in interface nxopen.cam.WedmOperationBuilder
Returns the finish_passes builder
License requirements: cam_base ("CAM BASE")
.
finishStepoverBuilder() - Method in interface nxopen.cam.FinishPassesBuilder
Returns the parameter to define the stepover value for a finish pass
License requirements: cam_base ("CAM BASE")
.
finishStock() - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder
Returns the finish stock builder
License requirements: None.
finishSymbol() - Method in interface nxopen.annotations.LineWeldDataBuilder
Returns the finishing method for the weld symbol
License requirements: None.
FinishTurning - Interface in nxopen.cam
Represents a Turn Finishing operation
To create or edit an instance of this class, use FinishTurningBuilder

Created in NX7.5.0
FinishTurningBuilder - Interface in nxopen.cam
Represents a FinishTurning Builder
To create a new instance of this class, use OperationCollection.createFinishTurningBuilder(nxopen.cam.CAMObject)

Created in NX6.0.0
finishType - Variable in class nxopen.uf.UFDrf.WeldSymInfo
 
FINITE - Static variable in class nxopen.features.sheetmetal.BridgeTransitionBuilder.WidthOptions
Bridge Transition starts at specified point on start edge and extends on one side by the specified distance.
FINITE - Static variable in class nxopen.features.sheetmetal.ContourFlangeBuilder.SweepTypeOptions
 
FINITE - Static variable in class nxopen.features.sheetmetal.NormalCutoutBuilder.DepthTypeOptions
Finite
FINITE - Static variable in class nxopen.motion.LmsSolverProperty.StaticJacobianTypes
 
FINITE_ELEMENT - Static variable in class nxopen.cae.ResultMeasure.SubsetSelection
Evaluate for subset selection of finite element entities
FIRE_HOSE - Static variable in class nxopen.cam.fbm.ThreadFeatureGeometry.Form
Form: Fire Hose
FIRE_HOSE - Static variable in class nxopen.cam.HoleBossGeom.FormTypes
Form: Fire Hose
FIREHOSE - Static variable in class nxopen.cam.DrillThreadMillToolBuilder.ToolFormTypeTypes
Fire Hose
FIRM - Static variable in class nxopen.HumanPosturePredictionBuilder.CushionFirmnessType
Indicate firm cushion
FIRST - Static variable in class nxopen.annotations.ArrowDisplay
Displays arrow to the first object selected to create the dimension
FIRST - Static variable in class nxopen.annotations.ExtensionLineDisplay
Displays extension line attached to the first object selected to create the dimension
FIRST - Static variable in class nxopen.blockstyler.Tree.NodeInsertOption
Node is placed first in the hierarchy in which it is inserted.
FIRST - Static variable in class nxopen.cae.ResultProbeBuilder.IterationSelection
 
FIRST - Static variable in class nxopen.cae.ResultProbeBuilder.LoadcaseSelection
 
FIRST - Static variable in class nxopen.cae.SimSolution.StepPosition
first
FIRST - Static variable in class nxopen.cam.InspectionPathBuilder.FirstLastType
First Point
FIRST - Static variable in class nxopen.facet.SewFacetBodyBuilder.VertexIndex
Index of the first vertex
FIRST - Static variable in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Wad
First wrap around distance line.
FIRST - Static variable in class nxopen.MeshProfileString.SelectedPoint
 
FIRST - Static variable in class nxopen.tooling.AutoDimensionBuilder.TextFontType
 
FIRST - Static variable in class nxopen.tooling.BurringInsertBuilder.BurringPunchTypes
use first type
FIRST - Static variable in class nxopen.weld.JointExitBuilder.BodySide
the first side.
FIRST - Static variable in class nxopen.weld.WeldFacesetIndex
first face set
FIRST - Static variable in class nxopen.weld.WeldGroupIdColor
First Group Id Color Index
FIRST_AND_SECOND_POINT - Static variable in class nxopen.features.DatumPlaneBuilder.UseArcLength
Only first and second point use arclength
FIRST_AND_THIRD_POINT - Static variable in class nxopen.features.DatumPlaneBuilder.UseArcLength
Only first and third point use arclength
FIRST_ANGLE_PROJECTION - Static variable in class nxopen.tooling.CompDrawingBuilder.ProjectionType
first angle projection
FIRST_ANGLE_PROJECTION - Static variable in class nxopen.uf.UFDraw.ProjectionAngle
 
FIRST_AXIS - Static variable in class nxopen.cae.PostGraphAlongPathBuilder.CoordinateSysAxis
 
FIRST_CUT - Static variable in class nxopen.cam.MoveBuilder.Motion
First Cut
FIRST_LAST - Static variable in class nxopen.cae.optimization.TBSOutputControlOptions.Op2Option
Output op2 results of first and last iteration
FIRST_LAYER - Static variable in class nxopen.layer.Constants
The number of the first layer.
FIRST_LEVEL - Static variable in class nxopen.preferences.SessionModeling.ImmediateChildrenType
Indicates that Immediate Children type is at first level
FIRST_LINK - Static variable in class nxopen.uf.UFMotion.ReferenceFrame
 
FIRST_PAIR_ONLY - Static variable in class nxopen.geometricanalysis.SimpleInterference.FaceInterferenceMethod
Find first pair of interfering faces
FIRST_POINT - Static variable in class nxopen.features.DatumAxisBuilder.UseArcLength
Only first point uses arclength
FIRST_POINT - Static variable in class nxopen.features.DatumPlaneBuilder.UseArcLength
Only first point uses arclength
FIRST_RUN - Static variable in class nxopen.routing.IntegrateRunsBuilder.Enum
 
FIRST_SET - Static variable in class nxopen.motion.PackagingInterferenceBuilder.Frame
Interference solids positioned relative to interfering links in first set.
FIRST_STRETCH_WALL - Static variable in class nxopen.die.AddendumSectionBuilder.SegmentType
Update first stretch wall segment.
FIRST_VALUE - Static variable in class nxopen.cae.ReassignElementsBuilder.ElementTypeOption
 
FIRST_VALUE - Static variable in class nxopen.features.shipdesign.SteelDistributionBuilder.SaForm
 
FIRST_VALUE - Static variable in class nxopen.features.shipdesign.SteelDistributionBuilder.SaMaterial
 
FIRST_VALUE - Static variable in class nxopen.features.shipdesign.SteelDistributionBuilder.SaName
 
FIRST_VALUE - Static variable in class nxopen.features.shipdesign.SteelDistributionBuilder.SaSize
 
FIRST_VALUE - Static variable in class nxopen.features.shipdesign.SteelDistributionBuilder.SaType
 
FIRST_VIEW_FOUND - Static variable in class nxopen.display.TransientText.ViewType
 
FIRST_XTHEN_Y - Static variable in class nxopen.features.ProjectCurveBuilder.ArcLengthType
Represents First X then Y
FIRST_YTHEN_X - Static variable in class nxopen.features.ProjectCurveBuilder.ArcLengthType
Represents First Y then X
firstAdoptionCurve() - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder
Returns the first adoption curve.
firstArrowheadCfw - Variable in class nxopen.uf.UFDrf.LineArrowPreferences
 
firstArrowheadColor() - Method in interface nxopen.annotations.LineArrowStyleBuilder
Returns the first arrowhead color
License requirements: None.
firstArrowheadFont() - Method in interface nxopen.annotations.LineArrowStyleBuilder
Returns the first arrowhead font
License requirements: None.
firstArrowheadWidth() - Method in interface nxopen.annotations.LineArrowStyleBuilder
Returns the first arrowhead width
License requirements: None.
firstArrowLineCfw - Variable in class nxopen.uf.UFDrf.LineArrowPreferences
 
firstArrowLineColor() - Method in interface nxopen.annotations.LineArrowStyleBuilder
Returns the first arrow line color
License requirements: None.
firstArrowLineFont() - Method in interface nxopen.annotations.LineArrowStyleBuilder
Returns the first arrow line font
License requirements: None.
firstArrowLineWidth() - Method in interface nxopen.annotations.LineArrowStyleBuilder
Returns the first arrow line width
License requirements: None.
firstArrowType() - Method in interface nxopen.annotations.LineAndArrowPreferences
Returns the first arrow type
License requirements: None.
firstArrowType() - Method in interface nxopen.annotations.LineArrowStyleBuilder
Returns the first arrowhead type
License requirements: None.
firstArrowType - Variable in class nxopen.uf.UFDrf.LineArrowPreferences
 
firstAssociativity() - Method in interface nxopen.annotations.BaseAngularDimensionBuilder
Returns the first associativity
License requirements: None.
firstAssociativity() - Method in interface nxopen.annotations.BaseChamferDimensionBuilder
Returns the first associativity
License requirements: None.
firstAssociativity() - Method in interface nxopen.annotations.BaseCurveLengthDimensionBuilder
Returns the first associativity
License requirements: None.
firstAssociativity() - Method in interface nxopen.annotations.BaseLinearDimensionBuilder
Returns the first associativity.
firstAssociativity() - Method in interface nxopen.annotations.BaseRadialDimensionBuilder
Returns the first associativity.
firstAssociativity() - Method in interface nxopen.annotations.BaseRapidDimensionBuilder
Returns the first associativity
License requirements: None.
firstAssociativity() - Method in interface nxopen.annotations.BaseThicknessDimensionBuilder
Returns the first associativity
License requirements: None.
firstAssociativity() - Method in interface nxopen.annotations.ShipDimensionBuilder
Returns the first associativity
License requirements: None.
firstBendRadius() - Method in interface nxopen.features.sheetmetal.HemFlangeBuilder
Returns the first bend radius
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
firstBody() - Method in interface nxopen.geometricanalysis.SimpleInterference
Returns the First Body
License requirements: None.
firstBody() - Method in interface nxopen.mechatronics.ChangeMaterialBuilder
Returns the first body of collision pair.
firstBody() - Method in interface nxopen.mechatronics.PreventCollisionBuilder
Returns the first object.
firstBoundingObject() - Method in interface nxopen.features.TrimCurveBuilder
Returns the objects for the first boundary against which the selected curves are to be trimmed.
firstBoundingObjectEndOption() - Method in interface nxopen.features.TrimCurveBuilder
Returns the end of the first bounding object which would be trimmed
License requirements: None.
firstBoundingObjectOption() - Method in interface nxopen.features.TrimCurveBuilder
Returns the first bounding object option
License requirements: None.
firstBoundingObjectPickPoint() - Method in interface nxopen.features.TrimCurveBuilder
Returns the pick point for the first bounding object
License requirements: None.
firstBoundingPlane() - Method in interface nxopen.features.TrimCurveBuilder
Returns the first bounding object plane
License requirements: None.
firstBranchID() - Method in interface nxopen.routing.BranchPathNumberingBuilder
Returns the formula specified in the UI to compute the first branch ID for the labeling sequence in order to be valid, the formula must be blank OR contain the phrase "PARENT_BRANCH_ID"
License requirements: routing_hvac ("Routing HVAC")
.
firstChainInstallDirection() - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder
Returns the flag to indicate whether to flip the direction of the first selected chain object or not.
firstChainObject() - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder
Returns the first chain selected object.
firstChannel() - Method in interface nxopen.tooling.CoolingConnectBuilder
Returns the first channel to be connected.
firstCompartment() - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
Returns the first compartment option.
firstConstraintCurveCollector() - Method in interface nxopen.geometricutilities.ConicCrossSection
Returns the first constraint curve collector
License requirements: None.
firstContactCurve() - Method in interface nxopen.motion.CurveContactBuilder
Returns the selection of the first contact curve
License requirements: None.
firstContactGeometry() - Method in interface nxopen.motion.BodyContactBuilder
Returns the selection of the first contact geometry
License requirements: None.
firstCorner() - Method in interface nxopen.drawings.StandardViewsBuilder
Deprecated.
Deprecated in NX6.0.2. Use the first corner of the multiple view placemnent builder instead
firstCornerEdges - Variable in class nxopen.uf.UFModl.SmreliefData
 
firstCornerFilletRadius - Variable in class nxopen.uf.UFModl.SmreliefData
 
firstCrossContinuity() - Method in interface nxopen.features.ThroughCurveMeshBuilder
Returns the first cross continuity, Continuity .
firstCsys() - Method in interface nxopen.motion.JointDefine
Returns the csys of first link
License requirements: mechanisms ("MECHANISMS")
.
firstCurve() - Method in interface nxopen.cam.TeachmodeLinearMoveBuilder
Returns the First Curve
License requirements: None.
firstCurve() - Method in interface nxopen.features.CircularBlendCurveBuilder
Returns the first curve chain
License requirements: None.
firstCurve() - Method in interface nxopen.features.GeodesicChamferBuilder
Returns the first selected curve in the section
License requirements: None.
firstCurve() - Method in interface nxopen.features.GeodesicFilletBuilder
Returns the first selected curve in the section
License requirements: None.
firstCurve() - Method in interface nxopen.geometricanalysis.DeviationChecking
Returns the first curve or edge - required for the deviation checking when DeviationChecking.type() and DeviationChecking.setType(nxopen.geometricanalysis.DeviationChecking.Types) is set to DeviationChecking.Types.CURVE_TO_CURVE .
firstCurveMaximumPenetration() - Method in interface nxopen.motion.CurveContactRecurdyn
Deprecated.
Deprecated in NX8.0.0. Obtain the expression using CurveContactRecurdyn.firstCurveMaximumPenetrationExpression() to query or edit it.
firstCurveMaximumPenetrationExpression() - Method in interface nxopen.motion.CurveContactRecurdyn
Returns the first curve maximum penetration expression
License requirements: None.
firstCurveStock() - Method in interface nxopen.cam.TeachmodeLinearMoveBuilder
Returns the Stock on first Curve
License requirements: None.
firstCurveTag - Variable in class nxopen.uf.UFCurve.AskCombineCurvesData
 
firstCurveToolPosition() - Method in interface nxopen.cam.TeachmodeLinearMoveBuilder
Returns the Tool Position to first Curve
License requirements: None.
firstCut() - Method in interface nxopen.cam.PathDisplayColors
Returns the color first cut
License requirements: None.
firstCuttingEdge() - Method in interface nxopen.cam.TurnCutterClearance
Returns the first cutting edge clearance angle
License requirements: None.
firstDefinitionPoint() - Method in interface nxopen.annotations.Associativity
Returns the first definition point.
firstDir - Variable in class nxopen.uf.UFCurve.AskCombineCurvesData
 
firstDistance() - Method in interface nxopen.cam.StepoverBuilder
Returns the First Distance
License requirements: None.
firstDistance() - Method in interface nxopen.facet.ExtrudeProfileBuilder
Returns the first distance to extrude
License requirements: None.
firstDistance() - Method in interface nxopen.features.sheetmetal.FlangeBuilder
Returns a distance based on FlangeBuilder.widthType() .
firstDriverJointLowerLimit() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
Returns the lower limit value for the first joint of the suspension template.
firstDriverJointSteps() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
Returns the step number for the first joint of the suspension template.
firstDriverJointUpperLimit() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
Returns the upper limit value for the first joint of the suspension template.
firstEdge() - Method in interface nxopen.geometricanalysis.DeviationChecking
firstEdge() - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder
Returns the first edges or faces
License requirements: None.
firstEdgeContinuity() - Method in interface nxopen.features.BridgeSurfaceBuilder
Returns the first edge continuity
License requirements: None.
firstEdgeOffset() - Method in interface nxopen.features.BridgeSurfaceBuilder
Returns the first edge offset
License requirements: None.
firstEdgeRange() - Method in interface nxopen.features.BridgeSurfaceBuilder
Returns the first edge range
License requirements: None.
firstEdgeSelection() - Method in interface nxopen.features.BridgeSurfaceBuilder
Returns the first edge selection
License requirements: None.
firstElementSplitType() - Method in interface nxopen.cae.ElementSplitBuilder
Returns the flip_type for first element in the selection list
License requirements: nx_masterfem ("Finite Element Modeling")
.
firstExtensionLineCfw - Variable in class nxopen.uf.UFDrf.LineArrowPreferences
 
firstExtensionLineColor() - Method in interface nxopen.annotations.LineArrowStyleBuilder
Returns the first extension line color
License requirements: None.
firstExtensionLineFont() - Method in interface nxopen.annotations.LineArrowStyleBuilder
Returns the first extension line font
License requirements: None.
firstExtensionLineWidth() - Method in interface nxopen.annotations.LineArrowStyleBuilder
Returns the first extension line width
License requirements: None.
firstFace() - Method in interface nxopen.features.IntersectionCurveBuilder
Returns the first face
License requirements: None.
firstFace - Variable in class nxopen.features.sheetmetal.ClosedCornerBuilder.FacePairData
First face of the face pair
firstface - Variable in class nxopen.features.sheetmetal.EditCornerBuilder.FacePairData
First face of the face pair
firstFace - Variable in class nxopen.features.sheetmetal.ThreeBendCornerBuilder.FacePairData
First face of the face pair
firstFace() - Method in interface nxopen.geometricanalysis.DeviationChecking
firstFaceCollector() - Method in interface nxopen.features.FaceBlendBuilder
Returns the first face collector
License requirements: None.
firstFaceSet() - Method in interface nxopen.geometricanalysis.SurfaceIntersectionBuilder
Returns the first selected face set
License requirements: None.
firstFaceset() - Method in interface nxopen.weld.GrooveBuilder
Deprecated.
Deprecated in NX9.0.0. Use WeldGrooveBuilder.faceSet1() and nxopen.weld.WeldGrooveBuilder#setFaceSet1 instead.
firstFacesetBottomEdges() - Method in interface nxopen.weld.GrooveBuilder
Deprecated.
Deprecated in NX9.0.0. Use WeldGrooveBuilder.edgeSet1() and nxopen.weld.WeldGrooveBuilder#setEdgeSet1 instead.
firstFacesetHelpPoint() - Method in interface nxopen.weld.GrooveBuilder
Deprecated.
firstFacesetTopEdges() - Method in interface nxopen.weld.GrooveBuilder
Deprecated.
Deprecated in NX9.0.0. Use WeldGrooveBuilder.edgeSet1() and nxopen.weld.WeldGrooveBuilder#setEdgeSet1 instead.
firstFlangeLength() - Method in interface nxopen.features.sheetmetal.HemFlangeBuilder
Returns the first flange length
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
firstGeometry() - Method in interface nxopen.SketchDimensionBuilder
Returns the first geometry
License requirements: None.
firstGeometryBoundingBufferLength() - Method in interface nxopen.motion.BodyContactRecurdyn
Deprecated.
Deprecated in NX8.0.0. Obtain the expression using BodyContactRecurdyn.firstGeometryBoundingBufferLengthExpression() to query or edit it.
firstGeometryBoundingBufferLengthExpression() - Method in interface nxopen.motion.BodyContactRecurdyn
Returns the bounding Buffer Length expression
License requirements: None.
firstGeometryMaterialDirection() - Method in interface nxopen.motion.CurveContactBuilder
Returns the first geometry materia side direction
License requirements: None.
firstGeometryMaxFacetSizeFactor() - Method in interface nxopen.motion.BodyContactRecurdyn
Deprecated.
Deprecated in NX8.0.0. Obtain the expression using BodyContactRecurdyn.firstGeometryMaxFacetSizeFactorExpression() to query or edit it.
firstGeometryMaxFacetSizeFactorExpression() - Method in interface nxopen.motion.BodyContactRecurdyn
Returns the max Facet Size Factor expression
License requirements: None.
firstGeometryMaxFacetSizeFactorFlag() - Method in interface nxopen.motion.BodyContactRecurdyn
Returns the max Facet Size Factor Flag
License requirements: None.
firstGeometryMaximumPenetration() - Method in interface nxopen.motion.BodyContactRecurdyn
Deprecated.
Deprecated in NX8.0.0. Obtain the expression using BodyContactRecurdyn.firstGeometryMaximumPenetrationExpression() to query or edit it.
firstGeometryMaximumPenetrationExpression() - Method in interface nxopen.motion.BodyContactRecurdyn
Returns the Plane Maximum Penetration of the first geometry expresion
License requirements: None.
firstGeometryPlaneToleranceFactor() - Method in interface nxopen.motion.BodyContactRecurdyn
Deprecated.
Deprecated in NX8.0.0. Obtain the expression using BodyContactRecurdyn.firstGeometryPlaneToleranceFactorExpression() to query or edit it.
firstGeometryPlaneToleranceFactorExpression() - Method in interface nxopen.motion.BodyContactRecurdyn
Returns the Plane Tolerance Factor of the first geometry expresion
License requirements: None.
firstGeometryPlaneToleranceFactorSolidContact() - Method in interface nxopen.motion.BodyContactRecurdyn
Deprecated.
Deprecated in NX8.0.0. Obtain the expression using BodyContactRecurdyn.firstGeometryPlaneToleranceFactorSolidContactExpression() to query or edit it.
firstGeometryPlaneToleranceFactorSolidContactExpression() - Method in interface nxopen.motion.BodyContactRecurdyn
Returns the Plane Tolerance Factor of the first geometry for solid contact expression
License requirements: None.
firstGuide() - Method in interface nxopen.features.StyledSweepBuilder
Returns the first guide
License requirements: None.
firstGuideContinuity() - Method in interface nxopen.features.StudioSurfaceBuilder
Returns the first guide continuity
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
firstIntersectionPoints() - Method in interface nxopen.features.shipdesign.ProfileSystemBuilder
Returns the selected intersection points between the curves and the first boundary.
firstJogAngle() - Method in interface nxopen.annotations.LineArrowStyleBuilder
Returns the first jog angle, between the jog and the extension line, in degrees.
firstJogDisplay() - Method in interface nxopen.annotations.LineArrowStyleBuilder
Returns the first jog's display flag, if true, the first jog will be displayed, false otherwise
License requirements: None.
firstJogEndOffset() - Method in interface nxopen.annotations.LineArrowStyleBuilder
Returns the first jog end offset from the dimension line
License requirements: None.
firstJogOrientation() - Method in interface nxopen.annotations.LineArrowStyleBuilder
Returns the first jog orientation, can be either IN or OUT
License requirements: None.
firstJogStartOffset() - Method in interface nxopen.annotations.LineArrowStyleBuilder
Returns the first jog start offset from the dimension line
License requirements: None.
firstJoint() - Method in interface nxopen.motion.CouplerBuilder
Returns the first joint
License requirements: None.
firstJoint() - Method in interface nxopen.motion.GeneralCouplerBuilder
Returns the selected first joint
License requirements: None.
firstLameFromBulkPoisson(double, double) - Method in interface nxopen.EngineeringFunction
Calculate the 1st Lame constant from bulk modulus and poisson ratio.
firstLameFromBulkShear(double, double) - Method in interface nxopen.EngineeringFunction
Calculate the 1st Lame constant from bulk modulus and shear modulus.
firstLameFromShearPoisson(double, double) - Method in interface nxopen.EngineeringFunction
Calculate the 1st Lame constant from shear modulus and poisson ratio.
firstLameFromYoungsBulk(double, double) - Method in interface nxopen.EngineeringFunction
Calculate the 1st Lame constant from youngs modulus and bulk modulus.
firstLameFromYoungsPoisson(double, double) - Method in interface nxopen.EngineeringFunction
Calculate the 1st Lame constant from youngs modulus and poisson.
firstLameFromYoungsShear(double, double) - Method in interface nxopen.EngineeringFunction
Calculate the 1st Lame constant from youngs modulus and shear modulus.
firstLawControl() - Method in interface nxopen.geometricutilities.ConicCrossSection
Returns the First Offset Law builder
License requirements: None.
firstLayerThickness() - Method in interface nxopen.cae.MeshControlBuilder
Returns the layer thickness
License requirements: nx_masterfem ("Finite Element Modeling")
.
firstLeg() - Method in interface nxopen.weld.FilletBuilder
Returns the linear dimension first leg.
firstLength() - Method in interface nxopen.tooling.DieBaseBuilder
Returns the first section length.
firstLimitPoint() - Method in interface nxopen.die.OutputCurvesBuilder
Returns the first limit point.
firstLine - Variable in class nxopen.uf.UFModl.DimensionData
 
firstLinearDistance() - Method in interface nxopen.cam.ToolPathEditorBuilder
Returns the first linear distance
License requirements: None.
firstLink() - Method in interface nxopen.motion.JointDefine
Returns the first link object
License requirements: mechanisms ("MECHANISMS")
.
firstLocation() - Method in interface nxopen.geometricutilities.StyledSweepDoubleOnPathDimBuilder
Returns the first location
License requirements: None.
firstMargin() - Method in interface nxopen.tooling.AutoDimensionBuilder
Returns the first margin tag
License requirements: None.
firstMarginOffset() - Method in interface nxopen.annotations.OrdinateDimensionPreferences
Returns the first margin offset
License requirements: None.
firstMatrix() - Method in interface nxopen.motion.JointDefine
Returns the matrix of first link
License requirements: mechanisms ("MECHANISMS")
.
firstObject() - Method in interface nxopen.annotations.Associativity
Returns the first associativity object
License requirements: None.
firstObject() - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder
Returns the first selected object.
firstObjectFilter() - Method in interface nxopen.cam.CollisionPairBuilder
Returns the first collision selection filter
License requirements: None.
firstObjectName() - Method in interface nxopen.cam.CollisionPairBuilder
Returns the first collision selection name
License requirements: None.
firstOffset() - Method in interface nxopen.features.ChamferBuilder
Returns the first offset distance (expression).
firstOffset() - Method in interface nxopen.features.SweepAlongGuideBuilder
Returns the first offset
License requirements: None.
firstOffset() - Method in interface nxopen.features.ThickenBuilder
Returns the first offset.
firstOffset() - Method in interface nxopen.geometricutilities.ConicCrossSection
Returns the first offset for the conic section with face blend
License requirements: None.
firstOffset - Variable in class nxopen.uf.UFModl.AskThickenSheetParmsData
 
firstOffsetExp() - Method in interface nxopen.features.ChamferBuilder
Returns the first offset expression object of chamfer.
firstOffsetOption() - Method in interface nxopen.geometricutilities.ConicCrossSection
Returns the first offset option for the conic section with face blend
License requirements: None.
firstOrientationType() - Method in interface nxopen.motion.JointDefine
Returns the first orientation type of joint
License requirements: mechanisms ("MECHANISMS")
.
firstOrigin() - Method in interface nxopen.motion.JointDefine
Returns the origin of first link
License requirements: mechanisms ("MECHANISMS")
.
firstPlane() - Method in interface nxopen.features.IntersectionCurveBuilder
Returns the first plane
License requirements: None.
firstPlane() - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder
Returns the first selected plane.
firstPlane() - Method in interface nxopen.routing.FittingOverstockBuilder
Returns the first trimming plane
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
FirstPlunge - Interface in nxopen.cam
Represents the first plunge .
firstPlunge() - Method in interface nxopen.cam.RoughTurningBuilder
Returns the First Plunge
License requirements: None.
FirstPlunge.Positions - Class in nxopen.cam
the first plunge positions .
firstPlungeOnly() - Method in interface nxopen.cam.ChipControl
Returns the First Plunge Only
License requirements: None.
firstPoint(Point3d, View) - Method in interface nxopen.display.NonProportionalZoom
Scales the specified view non-proportionally in the horizontal (X) and vertical (Y) dimensions, based on a mouse gesture defined by two points in a view.
firstPoint() - Method in interface nxopen.features.GeodesicChamferBuilder
Returns the first selection point
License requirements: None.
firstPoint() - Method in interface nxopen.features.GeodesicFilletBuilder
Returns the first selection point
License requirements: None.
firstPoint - Variable in class nxopen.uf.UFModl.DimensionData
 
firstPosToExtensionLineDistance() - Method in interface nxopen.annotations.LineArrowStyleBuilder
Returns the distance from the position on the object being dimensioned to the end of the first extension line or arc
License requirements: None.
firstPosToExtensionLineDistance - Variable in class nxopen.uf.UFDrf.LineArrowPreferences
 
firstPosToExtLineDist() - Method in interface nxopen.annotations.LineAndArrowPreferences
Returns the first position to extension line distance
License requirements: None.
firstPrimaryContinuity() - Method in interface nxopen.features.ThroughCurveMeshBuilder
Returns the first primary continuity, Continuity .
firstPtSelect() - Method in interface nxopen.cae.FaceFromBoundaryBuilder
Returns the first pt to join the ends of open edges in the loop.
firstRadius() - Method in interface nxopen.cam.TurnEngageRetractBuilder
Returns the First Radius
License requirements: None.
firstReferenceIntersection() - Method in interface nxopen.features.TrimCurveBuilder
Returns the first user defined intersection point.
firstRegionLimitCurve() - Method in interface nxopen.features.GlobalShapingBuilder
Returns the first region limit curve
License requirements: None.
firstRegionLimitCurveOffsetLaw() - Method in interface nxopen.features.GlobalShapingBuilder
Returns the region to deform offset law
License requirements: None.
firstRegionOffsetCurve() - Method in interface nxopen.features.GlobalShapingBuilder
Returns the first region offset curve
License requirements: None.
firstRun() - Method in interface nxopen.routing.IntegrateRunsBuilder
Returns the first run
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
firstScale() - Method in interface nxopen.motion.GeneralCouplerBuilder
Deprecated.
Deprecated in NX8.5.0. Obtion the exression using GeneralCouplerBuilder.firstScaleExpression() to query or edit it.
firstScaleExpression() - Method in interface nxopen.motion.GeneralCouplerBuilder
Returns the first scale expression
License requirements: None.
firstSection() - Method in interface nxopen.features.GeodesicChamferBuilder
Returns the first section of curves to chamfer
License requirements: None.
firstSection() - Method in interface nxopen.features.GeodesicFilletBuilder
Returns the first section of curves to fillet
License requirements: None.
firstSection() - Method in interface nxopen.features.RuledBuilder
Returns the first section
License requirements: features_modeling ("FEATURES MODELING") OR nx_freeform_1 ("basic freeform modeling")
.
firstSectionContinuity() - Method in interface nxopen.features.StudioSurfaceBuilder
Returns the first section continuity
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
firstSectionContinuity() - Method in interface nxopen.features.ThroughCurvesBuilder
Returns the first section continuity.
firstSegment() - Method in interface nxopen.routing.DiscontinuityCorner
Returns the first segment of a discontinuity corner, segment must be attached to the Routing.ControlPoint that defines this corner.
firstSelectedNode() - Method in interface nxopen.blockstyler.Tree
Returns the first selected node among the available selected nodes.
firstSelection() - Method in interface nxopen.cae.CfdContactPreventionConstraintBuilder
Returns the first selection
License requirements: None.
firstSet() - Method in interface nxopen.features.IntersectionCurveBuilder
Returns the first set required only for non-associative intersection curve
License requirements: None.
firstSolution() - Method in interface nxopen.routing.PlacementSolutionsBuilder
Cycle to the first solution.
firstTargetCurve() - Method in interface nxopen.features.GlobalShapingBuilder
Returns the first target curve
License requirements: None.
firstTargetCurveOffset() - Method in interface nxopen.features.GlobalShapingBuilder
Returns the first target curve offset
License requirements: None.
firstType() - Method in interface nxopen.motion.GeneralCouplerBuilder
Returns the first joint movement type
License requirements: None.
firstVector() - Method in interface nxopen.annotations.BaseAngularDimensionBuilder
Returns the first vector
License requirements: None.
firstVector() - Method in interface nxopen.motion.JointDefine
Returns the direction of first link
License requirements: mechanisms ("MECHANISMS")
.
firstVectorView() - Method in interface nxopen.annotations.BaseAngularDimensionBuilder
Returns the first vector view
License requirements: None.
FIT - Static variable in class nxopen.annotations.FitAnsiHoleType
Use fit values for the ANSI limit and fit tolerance
FIT - Static variable in class nxopen.annotations.HoleCalloutSettingsBuilder.Parametertype
 
FIT - Static variable in class nxopen.features.sheetmetal.GussetBuilder.PlacementTypes
Users will specify the number of occurances of Gusset on the selected bend face and software will calculate the spacing.
FIT - Static variable in class nxopen.positioning.Constraint.Type
Two geometries are coincident
FIT - Static variable in class nxopen.uf.UFDisp.Context
 
FIT - Static variable in class nxopen.userdefinedobjects.UserDefinedEvent.Reason
Fit display event
fit() - Method in interface nxopen.View
Adjusts the bounds of a given view so that it fully encompasses the extents of the model geometry.
FIT - Static variable in class nxopen.View.ScaleAdjustment
 
FIT_APPROXIMATE - Static variable in class nxopen.MeshParameterData.Type
 
FIT_CIRCLE - Static variable in class nxopen.features.FitCurveBuilder.Types
Fits an arc or a circle
FIT_ELLIPSE - Static variable in class nxopen.features.FitCurveBuilder.Types
Fits an ellipse
FIT_EXACT - Static variable in class nxopen.MeshParameterData.Type
 
FIT_LINE - Static variable in class nxopen.features.FitCurveBuilder.Types
Fits a line
FIT_METHOD_ABBREVIATE - Static variable in class nxopen.uf.UFTabnot.FitMethod
 
FIT_METHOD_AUTO_SIZE_COL - Static variable in class nxopen.uf.UFTabnot.FitMethod
 
FIT_METHOD_AUTO_SIZE_ROW - Static variable in class nxopen.uf.UFTabnot.FitMethod
 
FIT_METHOD_AUTO_SIZE_TEXT - Static variable in class nxopen.uf.UFTabnot.FitMethod
 
FIT_METHOD_NONE - Static variable in class nxopen.uf.UFTabnot.FitMethod
 
FIT_METHOD_OVERWRITE_BORDER - Static variable in class nxopen.uf.UFTabnot.FitMethod
 
FIT_METHOD_REMOVE_SPACES - Static variable in class nxopen.uf.UFTabnot.FitMethod
 
FIT_METHOD_TRUNCATE - Static variable in class nxopen.uf.UFTabnot.FitMethod
 
FIT_METHOD_WRAP - Static variable in class nxopen.uf.UFTabnot.FitMethod
 
FIT_SPLINE - Static variable in class nxopen.features.FitCurveBuilder.Types
Fits a spline
FIT_SYMBOLS - Static variable in class nxopen.annotations.FitDisplayStyle
Display only the grade and deviation
FIT_SYMBOLS_AND_LIMITS - Static variable in class nxopen.annotations.FitDisplayStyle
Display grade, deviation, and limit values
FIT_SYMBOLS_AND_TOLERANCES - Static variable in class nxopen.annotations.FitDisplayStyle
Display grade, deviation, and tolerance values
FIT_TO_FACET - Static variable in class nxopen.features.FillHoleBuilder.ShapeControlTypes
 
FIT_TO_POINTS - Static variable in class nxopen.features.FillHoleBuilder.ShapeControlTypes
 
FIT_TO_TARGET - Static variable in class nxopen.features.RefitFaceBuilder.Types
refit face to target
FIT_UP - Static variable in class nxopen.features.shipdesign.ExcessMaterialBuilder.Types
fit up placement method (added in NX902)
fitAfterShowOrHide(View.ShowOrHideType) - Method in interface nxopen.View
Adjusts the bounds of a given view conditionally so that it fully encompasses the extents of the model geometry.
fitAll() - Method in interface nxopen.ViewCollection
Adjusts the center and scale of each view in the current layout such that all of each view is visible, except that this fit operation is not applied to member views on a drawing.
FitAnsiHoleType - Class in nxopen.annotations
Specifies the limit and fit ANSI hole
FitAssemblyDisplayStyle - Class in nxopen.annotations
Specifies the limit and fit assembly display style
fitAxisLimit() - Method in interface nxopen.cae.xyplot.Plot
Update axis limits for an overlaying plot if current displayed axis limits in plot do not fit for all records.
FITCONE - Static variable in class nxopen.features.FitSurfaceBuilder.Types
Fit Cone
fitConstraints() - Method in interface nxopen.facet.BestFitAlignBuilder
Returns the fit constraint
License requirements: None.
FitCurve - Interface in nxopen.features
Represents a fit curve feature
To create or edit an instance of this class, use FitCurveBuilder

Created in NX8.5.0
FitCurveBuilder - Interface in nxopen.features
Represents a FitCurve builder
To create a new instance of this class, use FeatureCollection.createFitCurveBuilder(nxopen.features.FitCurve)
Default values.
FitCurveBuilder.FittingParametersOptions - Class in nxopen.features
Fitting parameters options
FitCurveBuilder.ProjectionDirectionOptions - Class in nxopen.features
Auxiliary curve projection direction options
FitCurveBuilder.TargetSourceTypes - Class in nxopen.features
Fitting target types
FitCurveBuilder.Types - Class in nxopen.features
Fitting types
FITCYLINDER - Static variable in class nxopen.features.FitSurfaceBuilder.Types
Fit Cylinder
fitDirection() - Method in interface nxopen.features.RefitFaceBuilder
Returns the refit face fit direction
License requirements: None.
fitDirectionData - Variable in class nxopen.uf.UFModl.RefitFaceTargetData
 
FitDisplayStyle - Class in nxopen.annotations
Specifies the limit and fit display style
fitDistance() - Method in interface nxopen.tooling.EjectorPostProcessingBuilder
Returns the distance used to adjust the length of an ejector pin for the false body
License requirements: None.
FitError() - Constructor for class nxopen.uf.UFCurve.FitError
 
FitError(double, double, int, int) - Constructor for class nxopen.uf.UFCurve.FitError
 
FITFREEFORM - Static variable in class nxopen.features.FitSurfaceBuilder.Types
Fit Freeform
fitGrade - Variable in class nxopen.uf.UFGdt.LimitsAndFitsData
 
fitMethod() - Method in interface nxopen.geometricutilities.CurveFitData
Returns the fitting method
License requirements: None.
fitMethod() - Method in interface nxopen.MeshParameterData
Returns
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
fitMethods - Variable in class nxopen.uf.UFTabnot.CellPrefs
 
fitOption() - Method in interface nxopen.geometricutilities.CurveFitOptions
Returns the curve fit method
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT")
.
fitOption() - Method in interface nxopen.geometricutilities.EndHoleData
Returns the fit option
License requirements: None.
fitOption() - Method in interface nxopen.geometricutilities.MiddleHoleData
Returns the fit option
License requirements: None.
fitOption() - Method in interface nxopen.geometricutilities.StartHoleData
Returns the fit option
License requirements: None.
fitPercentage() - Method in interface nxopen.preferences.SessionVisualizationScreen
Returns the fit percentage.
FITPLANE - Static variable in class nxopen.features.FitSurfaceBuilder.Types
Fit Plane
FITSPHERE - Static variable in class nxopen.features.FitSurfaceBuilder.Types
Fit Sphere
FitSurface - Interface in nxopen.features
Represents a fit surface feature
To create or edit an instance of this class, use FitSurfaceBuilder

Created in NX8.5.0
FitSurfaceBuilder - Interface in nxopen.features
This class will provide the ability to fit surfaces through facet bodies or point sets/groups.
FitSurfaceBuilder.DirectionType - Class in nxopen.features
Direction method provides the ability to specify the projection direction and orientation
FitSurfaceBuilder.TargetType - Class in nxopen.features
Target type provides the ability to specify a object or a color coded region as the target
FitSurfaceBuilder.Types - Class in nxopen.features
Fit Surface creation types
FITTED - Static variable in class nxopen.motion.BodyContactRecurdyn.SurfaceType
 
FITTED_TO_BOUNDARY - Static variable in class nxopen.features.IFormBuilder.BSurfaceExtractionOptions
Extract surface fitted to boundary of face
FITTING_OVERSTOCK - Static variable in class nxopen.formboard.UpdateDiscrepancy.ObjectType
Overstock applied to fittings.
FITTING_OVERSTOCK - Static variable in class nxopen.routing.StockBrowserBuilder.TypeFilter
 
fittingMembers() - Method in interface nxopen.routing.WatertightFittingsBuilder
Returns the Routing Object Collector builder that stores selected routing members
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
FittingOverstock - Interface in nxopen.routing
The FittingOverstock object represents overstock applied over the faces of the routing parts.
fittingOverstock() - Method in interface nxopen.routing.RouteManager
Routing FittingOverstock collection .
FittingOverstockBuilder - Interface in nxopen.routing
Builder for creating or editing FittingOverstock objects.
FittingOverstockBuilder.TrimMethod - Class in nxopen.routing
Trimming option.
FittingOverstockBuilder.Types - Class in nxopen.routing
Overstock application method.
FittingOverstockCollection - Interface in nxopen.routing
Represents a collection of FittingOverstock objects.
fittingParameters() - Method in interface nxopen.features.FitCurveBuilder
Returns the fitting parameters
License requirements: None.
fittingPoint() - Method in interface nxopen.tooling.ChannelFittingBuilder
Returns the new point specified for the cooling fitting point.
fittingPorts() - Method in interface nxopen.routing.RouteManager
FittingPort Collection .
FITTO_BOUNDARY - Static variable in class nxopen.features.StudioXformBuilderEx.ExtrationMethodType
Extract surface fitted to boundary of face
fitToleranceParentheses() - Method in interface nxopen.annotations.DimensionStyleBuilder
Returns the fit tolerance parentheses option.
fitToleranceSeparator() - Method in interface nxopen.annotations.DimensionStyleBuilder
Returns the fit tolerance separator option.
fitToObjects(IFitTo[]) - Method in interface nxopen.View
Adjusts the bounds of a given view so that it fully encompasses the extents of the given objects.
fitToSectionClipPlanes() - Method in interface nxopen.preferences.SessionVisualizationScreen
Returns the option to specify whether, when sectioning is enabled for a view, the bounds computed by a Fit operation should be limited by the sectioning clipping planes.
fitType - Variable in class nxopen.uf.UFGdt.LimitsAndFitsData
 
fitView(Tag, double) - Method in interface nxopen.uf.UFView
Refer to UF_VIEW_fit_view for documentation.
FIVE - Static variable in class nxopen.annotations.AutomaticCenterlineBuilder.CenterlineThickness
Width Five
FIVE - Static variable in class nxopen.annotations.CenterlineSettingsBuilder.CenterlineThickness
Width Five
FIVE - Static variable in class nxopen.annotations.IntersectionSymbolBuilder.Thickness
Width Five
FIVE - Static variable in class nxopen.annotations.LineWidth
Width Five
FIVE - Static variable in class nxopen.annotations.OffsetCenterPointBuilder.Thickness
Width Five
FIVE - Static variable in class nxopen.annotations.TargetPointBuilder.Thickness
Width Five
FIVE - Static variable in class nxopen.cae.CfdContactPreventionConstraintBuilder.LocalSubdivisions
 
FIVE - Static variable in class nxopen.cae.CfdLocalResolutionConstraintBuilder.LocalSubdivisions
 
FIVE - Static variable in class nxopen.cae.ModelDisplayBuilder.FreeEdgeWidth
 
FIVE - Static variable in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeWidth
 
FIVE - Static variable in class nxopen.die.SpringbackCompensationBuilder.DegreeType
Degree is 5
FIVE - Static variable in class nxopen.display.GridBuilder.LineWeightType
 
FIVE - Static variable in class nxopen.DisplayableObject.ObjectWidth
 
FIVE - Static variable in class nxopen.drawings.CustomViewSettingsBuilder.Width
Five
FIVE - Static variable in class nxopen.drawings.DrawingCompareSettingsBuilder.WidthType
Width Five
FIVE - Static variable in class nxopen.features.shipdesign.SectionDrawingBuilder.ViewsPerSheetOptions
 
FIVE - Static variable in class nxopen.PlaneTypes.AlternateType
Fifth alternate solution
FIVE - Static variable in class nxopen.preferences.ViewVisualizationVisual.SmoothEdgeWidth
 
FIVE - Static variable in class nxopen.preferences.Width
Width Five
FIVE - Static variable in class nxopen.tooling.BendOperationBuilder.Prebend
five prebends
FIVE - Static variable in class nxopen.tooling.BlankLayoutBuilder.SnapSizeOption
the snap size is 5
FIVE - Static variable in class nxopen.tooling.DirectUnfoldBuilder.Bend
five bends
FIVE - Static variable in class nxopen.tooling.PrebendBuilder.NumberBendsOption
five prebends
FIVE - Static variable in class nxopen.tooling.ScrapDesignBuilder.TrimNumType
Specifies five steps of trimming
FIVE - Static variable in class nxopen.ViewDependentDisplayManager.Width
 
FIVE_LINK_SOLID_AXLEWITHOUT_STEERING - Static variable in class nxopen.features.vehicledesign.TireEnvelopeBuilder.SuspensionTemplateType
Use the Five Link Solid Axle without steering suspension template.
FIVE_POINT - Static variable in class nxopen.features.SectionSurfaceBuilder.Types
Deprecated.
five point
FIVE_POINT - Static variable in class nxopen.features.SectionSurfaceBuilderEx.ConicType
Five Point mode
FIVE_POINTS - Static variable in class nxopen.features.GeneralConicBuilder.Types
Five points, no slopes, no anchor, no rho value
FIVE_TO_FIVE - Static variable in class nxopen.cam.ToolPathTiltAvoidance.AxisType
the tilting axis reference: five to five
FIVE_TO_FIVE - Static variable in class nxopen.cam.ToolPathTiltTilting.AxisType
the tilting axis reference: five to five
FIVE_TWELVE - Static variable in class nxopen.display.DecalBuilder.ImageSize
resize image to 512 x 512
FIX - Static variable in class nxopen.cae.optimization.TBSCheckDOF.CheckDofOption
Displacement is constrainted
FIX - Static variable in class nxopen.positioning.ComponentConstraint.DirectionToFixed
The constraint is a Constraint.Type.FIX
FIX - Static variable in class nxopen.positioning.Constraint.Type
One movable object fixed
FIX_END - Static variable in class nxopen.features.MatchEdgeBuilder.PoleMovementConstraintEnumType
Fix end
FIX_GSSM_CORNER_DATA - Static variable in class nxopen.cam.CAMObject.Attr
 
FIX_START - Static variable in class nxopen.features.MatchEdgeBuilder.PoleMovementConstraintEnumType
Fix start
fixAtCurrentTimestamp() - Method in interface nxopen.features.CompositeCurveBuilder
Returns the fix at timestamp option
License requirements: None.
fixAtCurrentTimestamp() - Method in interface nxopen.features.ExtractFaceBuilder
Returns the option specifying whether to fix the extract face operation at the current timestamp
License requirements: None.
fixAtCurrentTimestamp() - Method in interface nxopen.features.MirrorBodyBuilder
Returns the fix at current timestamp
License requirements: None.
fixAtCurrentTimestamp() - Method in interface nxopen.features.WaveLinkBuilder
Returns the fix at timestamp option
License requirements: None.
fixAtCurrentTimestamp() - Method in interface nxopen.features.WavePointBuilder
Returns the fix at timestamp
License requirements: None.
FIXATE - Static variable in class nxopen.HumanData.InverseKinematicsHeadEyeType
Indicate the position of head and eye is fixate
fixBsurfaceData(double, UFModl.Bsurface) - Method in interface nxopen.uf.UFModlGeneral
Refer to UF_MODL_fix_bsurface_data for documentation.
FixBsurfaceData() - Constructor for class nxopen.uf.UFModlGeneral.FixBsurfaceData
 
fixc - Variable in class nxopen.uf.UFModeling.AskHorzDimeData
 
fixc - Variable in class nxopen.uf.UFModeling.AskParaDistData
 
fixc - Variable in class nxopen.uf.UFModeling.AskVertDimeData
 
fixconsistency - Variable in class nxopen.cae.ModelCheckManager.CheckModelConsistencyData
indicates whether the inconsistency is fixed
fixConstraint() - Method in interface nxopen.assemblies.Component
Returns a fix ComponentConstraint of this component.
FIXED - Static variable in class nxopen.annotations.TableCellStyleBuilder.CellFormatTypes
Fixed
FIXED - Static variable in class nxopen.annotations.TableCellStyleBuilder.FormatType
Deprecated.
 
FIXED - Static variable in class nxopen.cam.DmCmBuilder.ExtDisType
Specify
FIXED - Static variable in class nxopen.cam.InspectionSensorBuilder.SensorTypes
Fixed
FIXED - Static variable in class nxopen.cam.ToolAxisFixed.Types
Fixed
FIXED - Static variable in class nxopen.cam.TurningOperationBuilder.TrackingPointType
fixed
FIXED - Static variable in class nxopen.cam.TurnToolProbingBuilder.TrackingPointTypes
fixed
FIXED - Static variable in class nxopen.display.FacetSettingsBuilder.FacetScale
Adjusts tolerances by a constant value
FIXED - Static variable in class nxopen.features.DatumAxisBuilder.Types
Indicate the datum axis is fixed
Fixed - Interface in nxopen.features
Represents a Fixed feature
To create or edit an instance of this class, use FixedBuilder

Created in NX7.0.0
FIXED - Static variable in class nxopen.features.sheetmetal.GussetBuilder.PlacementTypes
Users will specify the number of occurances and the spacing for Gussets on the selected bend face.
FIXED - Static variable in class nxopen.features.shipdesign.ShipnameFieldBuilderType
Field with an unchanging string
FIXED - Static variable in class nxopen.features.vehicledesign.SeatBeltAnchorageBuilder.SeatTypes
fixed
FIXED - Static variable in class nxopen.geometricutilities.OrientationMethodBuilder.OrientationOptions
Fixed
FIXED - Static variable in class nxopen.geometricutilities.OrientXpressBuilder.Reference
Reference CSYS is user defined coordinate system
FIXED - Static variable in class nxopen.geometricutilities.PatternOrientation.Enum
same orientation as the seed.
FIXED - Static variable in class nxopen.HumanPosturePredictionBuilder.SeatType
Indicate fixed seat
FIXED - Static variable in class nxopen.motion.JointDefine.Type
This Joint fixes a link or weld two links, It removes 6 degrees of freedom
fixed() - Method in interface nxopen.motion.LinkBuilder
Returns the link fixed to the ground
License requirements: None.
FIXED - Static variable in class nxopen.PlaneTypes.MethodType
Fixed Method (super type including any non-associative, xy, yz, xz, and coefficient
FIXED - Static variable in class nxopen.positioning.Network.ObjectStatus
Attempt to put constraint between two fixed objects.
FIXED - Static variable in class nxopen.Sketch.ConstraintType
 
FIXED - Static variable in class nxopen.SketchConstraintBuilder.Constraint
 
fixed - Variable in class nxopen.uf.UFModeling.AskHorzDimeData
 
fixed - Variable in class nxopen.uf.UFModeling.AskParaDistData
 
fixed - Variable in class nxopen.uf.UFModeling.AskVertDimeData
 
FIXED - Static variable in class nxopen.uf.UFSket.ConType
 
FIXED - Static variable in class nxopen.weld.OutputType
output data will not change if inputs change
FIXED - Static variable in class nxopen.weld.WeldBeadBuilder.OutputTypes
Bead does not recreate itself on update.
fixed1 - Variable in class nxopen.uf.UFModeling.AskAngleEdgeData
 
fixed1 - Variable in class nxopen.uf.UFModeling.AskParaEdgeData
 
fixed1 - Variable in class nxopen.uf.UFModeling.AskPerpDistData
 
fixed2 - Variable in class nxopen.uf.UFModeling.AskAngleEdgeData
 
fixed2 - Variable in class nxopen.uf.UFModeling.AskParaEdgeData
 
fixed2 - Variable in class nxopen.uf.UFModeling.AskPerpDistData
 
FIXED_AXIS - Static variable in class nxopen.cam.HoleMakingBuilder.ToolAxisTypes
Tool axis mode: Fixed axis
FIXED_AXIS - Static variable in class nxopen.cam.OrientGeomBuilder.ToolAxisModes
Tool axis mode: Fixed axis
FIXED_CROSS_SECTION - Static variable in class nxopen.routing.StockType
Fixed cross section, e.g., conduit
FIXED_CROSS_SECTION - Static variable in class nxopen.routing.Type
 
FIXED_DIRECTION - Static variable in class nxopen.uf.UFModl.BeadPlaneNormal
 
FIXED_FOLDED_LENGTH - Static variable in class nxopen.features.sheetmetal.ResizeBendRadiusBuilder.Types
 
FIXED_JOINT - Static variable in class nxopen.uf.UFMotion.JointType
 
FIXED_POINT - Static variable in class nxopen.cae.Post.Format
 
FIXED_SECTIONS - Static variable in class nxopen.features.vehicledesign.TireEnvelopeBuilder.EnvelopeOffsetMethod
Use the values in the fixed sections.
FIXED_TO_OBSERVER - Static variable in class nxopen.display.LightBuilder.LightMode
 
FIXED_TO_OBSERVER - Static variable in class nxopen.uf.UFView.LightMode
 
FIXED_TO_THE_PART - Static variable in class nxopen.display.LightBuilder.LightMode
 
FIXED_TO_THE_PART - Static variable in class nxopen.uf.UFView.LightMode
 
FIXED_UNFOLDED_LENGTH - Static variable in class nxopen.features.sheetmetal.ResizeBendRadiusBuilder.Types
 
FIXED_VIEW - Static variable in class nxopen.PlaneTypes.MethodType
View Plane method
FIXED_X - Static variable in class nxopen.PlaneTypes.MethodType
Fixed plane perpendicular to X thru WCS
FIXED_XY_CSYS - Static variable in class nxopen.PlaneTypes.MethodType
Fixed plane perpendicular to Z thru X-Y plane of CSYS
FIXED_Y - Static variable in class nxopen.PlaneTypes.MethodType
Fixed plane perpendicular to Y thru WCS
FIXED_Z - Static variable in class nxopen.PlaneTypes.MethodType
Fixed plane perpendicular to Z thru WCS
FixedBuilder - Interface in nxopen.features
Represents a builder for a fixed feature.
fixedCameraViewing - Variable in class nxopen.uf.UFDisp.ShadeOptions
 
fixedCsys() - Method in interface nxopen.geometricutilities.OrientXpressBuilder
Returns the orientXpress fixed csys when reference option is set to fixed csys
License requirements: None.
fixedCsys() - Method in interface nxopen.weld.JointmarkBuilder
Returns the fixed csys that overrides the default Csys orientation.
fixedCurves() - Method in interface nxopen.geometricutilities.FtmFixedCurvesBuilder
Returns the fixed curves that define the fixed constraints on the product shape
License requirements: None.
fixedCurvesContinuity() - Method in interface nxopen.geometricutilities.FtmFixedCurvesBuilder
Returns the continuity option for the fixed curves used in the transformation or morphing calculations
License requirements: None.
fixedCurvesList() - Method in interface nxopen.features.FreeTransformerBuilder
Returns the fixed curves list that defines the list items containing fixed curves used in the transformation or morphing calculations
License requirements: None.
fixedDirection() - Method in interface nxopen.mechatronics.BreakingConstraintBuilder
Returns the direction is fixed or not.
FixedJoint - Interface in nxopen.mechatronics
Represents the Fixed Joint.
FixedJointBuilder - Interface in nxopen.mechatronics
Represents a FixedJoint builder.
FixedJointCollection - Interface in nxopen.mechatronics
Represents a collection of Fixed Joint.
fixedJoints() - Method in interface nxopen.mechatronics.PhysicsManager
Returns the FixedJointCollection belonging to this part
Created in NX7.5.1
fixedLocationPercentage() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
Returns the fixed location percentage that is used for the fixed driver definition for two drivers.
fixedSide() - Method in interface nxopen.features.sheetmetal.BendBuilder
Returns the Fixed Side
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
fixedSide() - Method in interface nxopen.features.sheetmetal.JogBuilder
Returns
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
fixedSide - Variable in class nxopen.uf.UFNxsm.BendData
 
fixedSide - Variable in class nxopen.uf.UFNxsm.JogData
 
fixedSizeDatum() - Method in interface nxopen.features.DatumCsysBuilder
Deprecated.
Deprecated in NX7.5.1. This property is now always TRUE and calls to this property can be safely removed.
fixedStringOption() - Method in interface nxopen.features.StyledSweepBuilder
Returns the fixed string option
License requirements: None.
fixedTextSize() - Method in interface nxopen.preferences.SessionSketch
Returns the dimension text size when the text size fixed flag is set.
fixedTextSize() - Method in interface nxopen.preferences.SketchPreferences
Returns the fixed text size.
fixedVector() - Method in interface nxopen.cam.PmopToolAxisCiBuilder
Returns the tool axis vector
License requirements: None.
fixedVector() - Method in interface nxopen.cam.PreprocessGeometryBuilder
Returns the default tool axis vector
License requirements: cam_base ("CAM BASE")
.
fixLinkToGround(NXObject) - Method in interface nxopen.motion.MotionSession
Fix the link to ground
License requirements: mechanisms ("MECHANISMS")
.
fixOffplaneSketchCurves() - Method in interface nxopen.PartCleanup
Returns the option that specifies whether to fix off-plane sketch curves.
fixSplineData(UFCurve.Spline, double) - Method in interface nxopen.uf.UFCurve
Refer to UF_CURVE_fix_spline_data for documentation.
FixSplineData() - Constructor for class nxopen.uf.UFCurve.FixSplineData
 
fixStaleStock() - Method in interface nxopen.uf.UFRoute
Deprecated.
The equivalent Open C method has retired
fixSurfaceNodes() - Method in interface nxopen.cae.optimization.TBSMeshSmooth
Returns a value indicating whether to fix surface nodes outside design area
License requirements: None.
fixTabFlangePosition() - Method in interface nxopen.tooling.BendOperationBuilder
Returns the switch to set if fixed tab or flange position while resize bend radius.
fixture() - Method in interface nxopen.tooling.ElectrodeComponentBuilder
Returns the part which is an electrode fixture to be edited.
FIXTURE_OFFSET - Static variable in class nxopen.cam.OrientGeomBuilder.SpecialOutputModes
Special output mode: Fixture offset
fixtureOffsetBuilder() - Method in interface nxopen.cam.OrientGeomBuilder
Returns the Fixture Offset builder
License requirements: cam_base ("CAM BASE")
.
fixturePorts() - Method in interface nxopen.routing.RouteManager
FixturePort Collection .
FLAG - Static variable in class nxopen.annotations.LeaderData.LeaderType
Flag style
FLAG - Static variable in class nxopen.cam.ProbeProtectedParametersBuilder.CollisionFlagTypes
Error flag
flag - Variable in class nxopen.uf.UFCurve.State
 
FLAGGED - Static variable in class nxopen.routing.StockType
Flagged, e.g., paper flag
FLAGGED - Static variable in class nxopen.routing.Type
 
flagOfUsingContainer() - Method in interface nxopen.mechatronics.RuntimeNCBuilder
Returns the flag which indicates whether to put the MCD connected objects to the specific 'Runtime NC' container or not.
flagOfUsingSpecifiedMCF() - Method in interface nxopen.mechatronics.RuntimeNCBuilder
Returns the flag which indicates whether use the specified MCF or not.
FLANGE - Static variable in class nxopen.die.SteelInsertBuilder.InsertTypeOption
flange
FLANGE - Static variable in class nxopen.die.SteelInsertSegmentChildBuilder.InsertTypeOption
flange
FLANGE - Static variable in class nxopen.die.SteelInsertSegmentParentBuilder.InsertTypeOption
flange
Flange - Interface in nxopen.features
Represents a Flange feature
To create or edit an instance of this class, use FlangeBuilder

Created in NX5.0.0
FLANGE - Static variable in class nxopen.features.shipdesign.StiffenerBySupportPathBuilder.AlignedTo
 
FLANGE - Static variable in class nxopen.geometricanalysis.GapFlushnessBuilder.PanelTypes
type flange
FLANGE - Static variable in class nxopen.tooling.InsertAuxiliaryBuilder.ShankShapeTypes
flange
FLANGE_FREE - Static variable in class nxopen.features.shipdesign.EdgeReinforcementBuilder.EndCutTypes
 
FLANGE_FREE - Static variable in class nxopen.features.shipdesign.EndCutBuilder.ConnectionTypes
If this Connection Type is set, the offset parameter will be ignored.
FLANGE_FREE - Static variable in class nxopen.features.shipdesign.StiffenerSystemBuilder.EndCutTypes
 
FLANGE_ONLY - Static variable in class nxopen.features.shipdesign.SeamBlockBuilder.SeamType
Split the built up flange
FLANGE_ONLY - Static variable in class nxopen.features.SilhouetteFlangeBuilder.OutputSurfaceOptions
Output flange surface
flangeAngle() - Method in interface nxopen.features.shipdesign.BuiltUpOffsetBuilder
Returns the flange angle used to determin the boundary of seam/split
License requirements: None.
flangeBaseProfile() - Method in interface nxopen.die.ClampingSlotBuilder
Returns the closed profile of the flange base
License requirements: None.
FlangeBendProfileData() - Constructor for class nxopen.die.RotorBuilder.FlangeBendProfileData
 
flangeBoundary() - Method in interface nxopen.features.shipdesign.EndCutBuilder
Returns the flange boundary.
FlangeBuilder - Interface in nxopen.features.sheetmetal
Represents a Flange feature builder.
FlangeBuilder.InsetTypeOptions - Class in nxopen.features.sheetmetal
This enum represents the inset type for the material of the flange.
FlangeBuilder.LengthTypeOptions - Class in nxopen.features.sheetmetal
This enum indicates the two ways that the flange length can be measured.
FlangeBuilder.MatchFaceOptions - Class in nxopen.features.sheetmetal
This enum represents the match face option for the flange.
FlangeBuilder.OffsetTypeOptions - Class in nxopen.features.sheetmetal
This enum represents the offset type for the flange.
FlangeBuilder.WidthTypeOptions - Class in nxopen.features.sheetmetal
This enum represents the width type for the flange.
flangeClearance() - Method in interface nxopen.features.sheetmetal.ThreeBendCornerBuilder
Returns the flange clearance used for three bend corner miter treatment.
flangeCurve() - Method in interface nxopen.tooling.DieDesDrawDieBuilder
Returns the flange curve, which is used for extrusion.
FlangeData() - Constructor for class nxopen.uf.UFModl.FlangeData
 
FlangeData(int, int, int, int, int, boolean, int, String, String, String, String, String, int, int, String[], String[], String[], String[], String, String, String) - Constructor for class nxopen.uf.UFModl.FlangeData
 
flangeData - Variable in class nxopen.uf.UFModl.InsetFlangeData
 
flangeData - Variable in class nxopen.uf.UFNxsm.AskFlangeData
 
FlangeData() - Constructor for class nxopen.uf.UFNxsm.FlangeData
 
FlangeData(Tag, Tag, String, UFNxsm.FeaturePropertyConstants, UFNxsm.FeaturePropertyConstants, UFNxsm.FeaturePropertyConstants, UFNxsm.FeaturePropertyConstants, String, boolean, String, boolean, String, boolean, String, String, boolean, boolean) - Constructor for class nxopen.uf.UFNxsm.FlangeData
 
flangeDirection() - Method in interface nxopen.die.DieAssistantFlangeProfile
Returns the flange profile flange direction
License requirements: None.
flangeDirection() - Method in interface nxopen.routing.WatertightFittingsBuilder
Returns the direction of flange thickness
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
flangeEndProfile() - Method in interface nxopen.die.DieAssistantFlangeProfile
Returns the flange end profile
License requirements: None.
flangeFace() - Method in interface nxopen.tooling.HemFixerBuilder
Returns the flange faces that will be offset for creating gap between flange and base body
License requirements: None.
flangeFactor() - Method in interface nxopen.features.SilhouetteFlangeBuilder
Returns the flange pipe continuity factor.
flangeOffset() - Method in interface nxopen.features.shipdesign.BuiltUpOffsetBuilder
Returns the flange offset used to determin the boundary of seam/split
License requirements: None.
flangeOffset() - Method in interface nxopen.routing.WatertightFittingsBuilder
Returns the offset value for flange creation
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
flangeOffset() - Method in interface nxopen.tooling.DieDesDrawDieBuilder
Returns the flange offset, which is the offset value from projected blank curve to flange curve.
flangePipeContinuity() - Method in interface nxopen.features.SilhouetteFlangeBuilder
Returns the flange pipe continuity
License requirements: None.
flangeProfile() - Method in interface nxopen.die.DieAssistantFlangeProfile
Returns the flange profile
License requirements: None.
flangeProfile() - Method in interface nxopen.die.TrimFlangeDieAssistantBuilder
Returns the flange profile
License requirements: None.
flangeProfile() - Method in interface nxopen.tooling.DieDesDrawPunchBuilder
Returns the flange profile, which is used for user defined flange shape.
flangeProfileDirection() - Method in interface nxopen.die.DieAssistantFlangeProfile
Returns the flange profile direction
License requirements: None.
flangeProfileSet() - Method in interface nxopen.die.TrimFlangeDieAssistantBuilder
Returns the flange profile set
License requirements: None.
flangeSide() - Method in interface nxopen.die.DieAssistantFlangeProfile
Returns the flange profile reverse flange side indicator
License requirements: None.
flangeSketch() - Method in interface nxopen.routing.WatertightFittingsBuilder
Returns the section used for creating penetration extrude.
flangeSketchData() - Method in interface nxopen.features.shipdesign.EndCutBuilder
Returns the flange sketch data.
FlangeSketchData() - Constructor for class nxopen.uf.UFNxsm.FlangeSketchData
 
FlangeSketchData(UFNxsm.FlangeWidthOption, UFNxsm.FeaturePropertyConstants, String, String, double[], String, String, String, UFNxsm.FlangeWidthOption) - Constructor for class nxopen.uf.UFNxsm.FlangeSketchData
 
flangeSteelRestrikeParms() - Method in interface nxopen.die.TrimFlangeDieAssistantBuilder
TODO: fill in a description for this
License requirements: ug_die_design ("Die Design")
.
FlangeSteelRibChildBuilder - Interface in nxopen.die
Represents a Die Flange Steel Rib Child sub feature.
FlangeSteelRibParentBuilder - Interface in nxopen.die
Represents a Die Flange Steel Rib Parent sub feature.
flangeSteelWipeParms() - Method in interface nxopen.die.TrimFlangeDieAssistantBuilder
TODO: fill in a description for this
License requirements: ug_die_design ("Die Design")
.
flangeTask(nxopen.features.Feature) - Method in interface nxopen.die.DieCollection
Creates/Edits the flange task feature builder.
FlangeTaskBuilder - Interface in nxopen.die
Represents a Flange Task feature builder.
FlangeTaskBuilder.CameraLayerAndXmlpData - Class in nxopen.die
This class holds the data returned from FlangeTaskBuilder.getCameraLayerAndXmlp()
FlangeTaskBuilder.CamTypes - Class in nxopen.die
Settings for the cam type of the flange task.
FlangeTaskBuilder.PierceTypes - Class in nxopen.die
Settings for the pierce type of the flange task.
FlangeTaskBuilder.RegionBoundsData - Class in nxopen.die
This class holds the data returned from FlangeTaskBuilder.getRegionBounds()
FlangeTaskBuilder.SpringbackTypes - Class in nxopen.die
Settings for the springback type of the flange task.
flangeThickness() - Method in interface nxopen.die.ClampingSlotBuilder
Returns the thickness of the flange
License requirements: None.
flangeThickness() - Method in interface nxopen.die.DieShoeBuilder
Returns the flange thickness
License requirements: None.
flangeThickness() - Method in interface nxopen.routing.WatertightFittingsBuilder
Returns the thickness value for flange creation
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
flangeType() - Method in interface nxopen.die.DieAssistantFlangeProfile
Returns the flange type
License requirements: None.
flangeWidth() - Method in interface nxopen.features.shipdesign.SeamBlockBuilder
Returns the built up flange width.
FLANGING - Static variable in class nxopen.tooling.ForceCalculationBuilder.ProcessTypes
flanging
FLARE_BEVEL - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSymbolType
 
FLARE_BEVEL - Static variable in class nxopen.annotations.Symbol
Specifies flare bevel weld symbol
FLARE_V - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSymbolType
 
FLARE_V - Static variable in class nxopen.annotations.Symbol
Specifies flare V weld symbol
FLARED_BEVEL_GROOVE - Static variable in class nxopen.weld.WeldGrooveBuilder.Types
Flared Bevel Groove
FLARED_VGROOVE - Static variable in class nxopen.weld.WeldGrooveBuilder.Types
Flared V Groove
FLAT - Static variable in class nxopen.annotations.LineWeldDataBuilder.ContourSymbolType
 
FLAT - Static variable in class nxopen.assemblies.Subset.PartitionViewStyleType
Show flat partition view style for subset
FLAT - Static variable in class nxopen.cam.CutRegionsBuilder.CutRegionsContainmentTypes
Flat
FLAT - Static variable in class nxopen.cam.EditSubopCommand.ContainmentTypes
Flat
FLAT - Static variable in class nxopen.features.NSidedSurfaceBuilder.CenterControlAxisType
center flat
FLAT - Static variable in class nxopen.features.sheetmetal.SheetmetalBendState
 
FLAT - Static variable in class nxopen.ModelingViewHighQualityImage.ShadeMethod
The fastest shading method.
FLAT - Static variable in class nxopen.uf.UFDisp.ShadeMethod
 
FLAT_OVAL - Static variable in class nxopen.features.shipdesign.PenetrationRequest.CoutoutType
 
FLAT_OVAL - Static variable in class nxopen.routing.DuctSizeCalculatorBuilder.DuctShapeType
 
FLAT_OVAL - Static variable in class nxopen.routing.PathStockBuilder.AssignMethod
User specified values, creates flat_oval space reservation stock.
FLAT_TO_BEAD - Static variable in class nxopen.die.AddendumSectionBuilder.SegmentType
Update flat to bead segment.
FLAT_TOP_TYPE - Static variable in class nxopen.uf.UFModl.SmpunchTopType
 
flatArcToLine - Variable in class nxopen.uf.UFDraw.AskSimplifiedCurveData
 
FLATNESS - Static variable in class nxopen.annotations.FeatureControlFrameBuilder.FcfCharacteristic
flatness
FLATNESS - Static variable in class nxopen.annotations.GeometricCharacteristic
Specifies flatness characteristics
FLATNESS - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.CharacteristicOptions
flatness
FLATNESS - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.TolType
Flatness
FLATNESS_TYPE - Static variable in class nxopen.uf.UFGdt.Characteristic
 
flatnessTolerance() - Method in interface nxopen.geometricanalysis.DupinBuilder
Returns the tolerance that defines at the specified point if an area is flat.
flatOvalHeight() - Method in interface nxopen.routing.PathStockBuilder
Returns the height value to use for the Routing.PathStockBuilder.AssignMethod#FLAT_OVAL method of stock assignment.
flatOvalRotation() - Method in interface nxopen.routing.PathStockBuilder
Returns the Width value to use for the Routing.PathStockBuilder.AssignMethod#FLAT_OVAL method of stock assignment
License requirements: routing_base ("Routing Basic")

Created in NX7.5.0
flatOvalWidth() - Method in interface nxopen.routing.PathStockBuilder
Returns the Width value to use for the Routing.PathStockBuilder.AssignMethod#FLAT_OVAL method of stock assignment
License requirements: routing_base ("Routing Basic")

Created in NX7.5.0
flatPattern() - Method in interface nxopen.drawings.ViewStyle
Returns object for doing View style settings applicable to Flat Pattern Views.
FlatPattern - Interface in nxopen.features
Represents a Flat Solid feature
To create or edit an instance of this class, use FlatPatternBuilder

Created in NX5.0.1
flatPattern() - Method in interface nxopen.features.sheetmetal.ExportFlatPatternBuilder
Returns the flat pattern feature
License requirements: None.
flatPattern() - Method in interface nxopen.preferences.ViewPreferences
Returns object for doing View Preferences settings applicable to Flat Patterns .
FlatPattern.ObjectDataCsys - Class in nxopen.features
Structure used to return data about objects in the flat pattern.
FlatPattern.ObjectDataEdge - Class in nxopen.features
Structure used to return data about objects in the flat pattern.
FlatPattern.ObjectDataFace - Class in nxopen.features
Structure used to return data about objects in the flat pattern.
FlatPattern.ObjectDataGeneral - Class in nxopen.features
Structure used to return data about objects in the flat pattern.
FlatPatternBuilder - Interface in nxopen.features.sheetmetal
Represents a Flat Pattern feature builder.
FlatPatternCalloutTypeDisplay() - Constructor for class nxopen.preferences.PartFlexiblePrintedCircuitDesign.FlatPatternCalloutTypeDisplay
 
FlatPatternCalloutTypeDisplay(String, int, String) - Constructor for class nxopen.preferences.PartFlexiblePrintedCircuitDesign.FlatPatternCalloutTypeDisplay
Constructor for the FlatPatternCalloutTypeDisplay object.
FlatPatternCalloutTypeDisplay() - Constructor for class nxopen.preferences.PartSheetmetal.FlatPatternCalloutTypeDisplay
 
FlatPatternCalloutTypeDisplay(String, int, String) - Constructor for class nxopen.preferences.PartSheetmetal.FlatPatternCalloutTypeDisplay
Constructor for the FlatPatternCalloutTypeDisplay object.
FlatPatternCalloutTypeDisplay() - Constructor for class nxopen.sheetmetal.FlatPatternSettings.FlatPatternCalloutTypeDisplay
 
FlatPatternCalloutTypeDisplay(String, int, String) - Constructor for class nxopen.sheetmetal.FlatPatternSettings.FlatPatternCalloutTypeDisplay
Constructor for the FlatPatternCalloutTypeDisplay object.
FlatPatternObject - Interface in nxopen.drawings
Provides an interface to the data available for flat pattern objects on drawing views.
flatPatternObject - Variable in class nxopen.features.FlatPattern.ObjectDataCsys
Point in the flat pattern
flatPatternObject - Variable in class nxopen.features.FlatPattern.ObjectDataEdge
Curve in the flat pattern
flatPatternObject - Variable in class nxopen.features.FlatPattern.ObjectDataFace
Curve in the flat pattern
flatPatternObject - Variable in class nxopen.features.FlatPattern.ObjectDataGeneral
Object in the flat pattern
FlatPatternObject.DirectionsData - Class in nxopen.drawings
This class holds the data returned from FlatPatternObject.getDirections()
FlatPatternObjectTypeDisplay() - Constructor for class nxopen.preferences.PartFlexiblePrintedCircuitDesign.FlatPatternObjectTypeDisplay
 
FlatPatternObjectTypeDisplay(PartFlexiblePrintedCircuitDesign.FlatPatternObjectType, int, NXColor, int, DisplayableObject.ObjectFont, DisplayableObject.ObjectWidth) - Constructor for class nxopen.preferences.PartFlexiblePrintedCircuitDesign.FlatPatternObjectTypeDisplay
Constructor for the FlatPatternObjectTypeDisplay object.
FlatPatternObjectTypeDisplay() - Constructor for class nxopen.preferences.PartSheetmetal.FlatPatternObjectTypeDisplay
 
FlatPatternObjectTypeDisplay(PartSheetmetal.FlatPatternObjectType, int, NXColor, int, DisplayableObject.ObjectFont, DisplayableObject.ObjectWidth) - Constructor for class nxopen.preferences.PartSheetmetal.FlatPatternObjectTypeDisplay
Constructor for the FlatPatternObjectTypeDisplay object.
FlatPatternObjectTypeDisplay() - Constructor for class nxopen.sheetmetal.FlatPatternSettings.FlatPatternObjectTypeDisplay
 
FlatPatternObjectTypeDisplay(FlatPatternSettings.FlatPatternObjectType, int, NXColor, ViewDependentDisplayManager.Font, ViewDependentDisplayManager.Width) - Constructor for class nxopen.sheetmetal.FlatPatternSettings.FlatPatternObjectTypeDisplay
Constructor for the FlatPatternObjectTypeDisplay object.
FlatPatternsBuilder - Interface in nxopen.cae
Represents a Flat Patterns Builder.
FlatPatternSettings - Interface in nxopen.sheetmetal
Provides access to object and callout properties for sheet-metal data in flat pattern views on drawings.
FlatPatternSettings.FlatPatternCalloutTypeDisplay - Class in nxopen.sheetmetal
The members of the following structure are the display data for a callout in a flat pattern drawing member view.
FlatPatternSettings.FlatPatternObjectType - Class in nxopen.sheetmetal
The members of the following enumerated type are used to identify object types to the FlatPatternView API.
FlatPatternSettings.FlatPatternObjectTypeDisplay - Class in nxopen.sheetmetal
The members of the following structure are the display data for an object in a flat pattern drawing member view.
flatPatternViewName() - Method in interface nxopen.features.sheetmetal.FlatPatternBuilder
Returns the flat pattern view name string
License requirements: None.
FlatPatternViewPreferences - Interface in nxopen.preferences
Provides access to object and callout properties for sheet-metal data in flat pattern views on drawings.
FlatPatternViewStyle - Interface in nxopen.drawings
Provides access to object and callout properties for sheet-metal data in flat pattern views on drawings.
FlatSolid - Interface in nxopen.features
Represents a Flat Solid feature
To create or edit an instance of this class, use FlatSolidBuilder

Created in NX5.0.0
FlatSolid.ObjectDataCsys - Class in nxopen.features
Structure used to return the objects of a flat solid.
FlatSolidBuilder - Interface in nxopen.features.sheetmetal
Represents a Flat As Solid feature builder.
FlatSolidBuilder.TransformComponentsOption - Class in nxopen.features.sheetmetal
The enum defines how to represent PCB components on flat solid.
FlatSolidData() - Constructor for class nxopen.uf.UFNxsm.FlatSolidData
 
FlatSolidData(Tag, Tag, int) - Constructor for class nxopen.uf.UFNxsm.FlatSolidData
 
flatSolidObject - Variable in class nxopen.features.FlatPattern.ObjectDataCsys
Corresponding CSYS on the flat solid
flatSolidObject - Variable in class nxopen.features.FlatPattern.ObjectDataEdge
Corresponding edge on the flat solid
flatSolidObject - Variable in class nxopen.features.FlatPattern.ObjectDataFace
Corresponding bend face on the flat solid
flatSolidObject - Variable in class nxopen.features.FlatPattern.ObjectDataGeneral
Corresponding object on the flat solid
flatSolidObject - Variable in class nxopen.features.FlatSolid.ObjectDataCsys
object on flat solid
flattenAssembly() - Method in interface nxopen.DxfdwgCreator
Returns the flatten assembly - if set to true then assembly structure will not be retained
License requirements: None.
flattenAssembly() - Method in interface nxopen.IgesCreator
Returns the flatten assembly - if set to true the assembly structure will not be retained
License requirements: None.
flattenAssembly() - Method in interface nxopen.IgesImporter
Returns the flatten assembly - if set to true then assembly structure will not be retained
License requirements: None.
flattenAssembly() - Method in interface nxopen.Step203Importer
Returns the flatten assembly - if set to true then assembly structure will not be retained
License requirements: None.
flattenAssembly() - Method in interface nxopen.Step214Importer
Returns the flatten assembly - if set to true then assembly structure will not be retained
License requirements: None.
flattenHierarchy() - Method in interface nxopen.annotations.PinListBuilder
Returns the options specifies whether to flatten hierarchy.
FLEX_PCD_SHEETMETAL - Static variable in class nxopen.FileNewApplication
Deprecated.
Specifies a Flex Printed Circuit Design sheet metal template
FLEX_WAIST - Static variable in class nxopen.HumanReachZone.MethodType
 
flexBodies() - Method in interface nxopen.motion.MotionManager
Returns the Motion.FlexBodyCollection belonging to this part
Created in NX7.5.0
FlexBody - Interface in nxopen.motion
Represents the Motion FlexBody class.It must be associated with a Motion Link.
FLEXBODY - Static variable in class nxopen.motion.MotionSolutionBuilder.SolutionTypes
Flexible Body Dynamics run
FlexBodyBuilder - Interface in nxopen.motion
Represents a FlexBody builder
To create a new instance of this class, use FlexBodyCollection.createFlexBodyBuilder(nxopen.motion.FlexBody)
Default values.
FlexBodyBuilder.Positioning - Class in nxopen.motion
Represents positioning type of flexible body
FlexBodyBuilder.SourceType - Class in nxopen.motion
Represents rfi file type of flexible body
FlexBodyCollection - Interface in nxopen.motion
Represents a collection of flexible body objects
To obtain an instance of this class, refer to MotionManager

Created in NX7.5.0
FLEXIBLE_PRINTED_CIRCUIT_DESIGN - Static variable in class nxopen.features.sheetmetal.ApplicationContext
Flexible Printed Circuit Design application context
FlexibleCable - Interface in nxopen.features
Represents a flexible cable
To create or edit an instance of this class, use FlexibleCableBuilder

Created in NX7.5.0
FlexibleCableBuilder - Interface in nxopen.features.sheetmetal
Represents a Flexible Cable feature builder.
FlexibleCableBuilder.BendAngleDirectionOptions - Class in nxopen.features.sheetmetal
This enum represents the bend angle direction for the bend segment.
FlexibleCableBuilder.PathAdjustmentAngleDirectionOptions - Class in nxopen.features.sheetmetal
This enum represents the path adjustment angle direction for the bend segment.
FlexibleCableBuilder.SegmentTypeOptions - Class in nxopen.features.sheetmetal
Represents the Flexible Cable segment options.
FlexibleCableSegment - Interface in nxopen.features.sheetmetal
Represents a Flexible Cable Segment class.
FlexPhysicalDampingSettings - Interface in nxopen.motion
Represents the physical damping settings for flexible body .
flip() - Method in interface nxopen.annotations.SingleSidedDisplayBuilder
Flips the side of single sided dimension
License requirements: drafting ("DRAFTING")
.
flip() - Method in interface nxopen.cae.ElementExtrudeBuilder
Flip the direction of extrude - not journalled
License requirements: nx_masterfem ("Finite Element Modeling")
.
flip() - Method in interface nxopen.cae.ElementSplitBuilder
Flip will not be journaled now
License requirements: nx_masterfem ("Finite Element Modeling")
.
flip() - Method in interface nxopen.geometricutilities.CircularPattern
Returns the flip object for 2D mode.
flip() - Method in interface nxopen.geometricutilities.HorizontalReference
Returns the 2D Selection flip attribute.
flip() - Method in interface nxopen.geometricutilities.PolygonPattern
Returns the flip object for 2D mode.
flip() - Method in interface nxopen.IPlane
Returns the flip direction of the plane
License requirements: None.
Flip - Class in nxopen.routing
Describes whether the stock profile is flipped, see the user help documenation on Orient Stock.
flip() - Method in interface nxopen.tooling.StandardPartBuilder
Flips the selected standard part component.
flip - Variable in class nxopen.uf.UFDrf.AskSymbolMirrorAndFlipData
 
flip - Variable in class nxopen.uf.UFSo.DirrOnSurfData
 
FLIP_BLANK - Static variable in class nxopen.tooling.BlankLayoutBuilder.Types
the type of flip blank
flipAlignment() - Method in interface nxopen.positioning.Constraint
Reverses the constraint alignment if this is possible.
flipAllOffsetsOfSection(Section) - Method in interface nxopen.features.AOCSBuilder
Reverse the direction of all offsets of the section.
flipApproachDirection() - Method in interface nxopen.cam.InspectionPathBuilder
Flips the approach direction vector
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
flipBaseNormalDirection() - Method in interface nxopen.features.GlobalShapingBuilder
Returns the flip base normal direction
License requirements: None.
flipBaseUDirection() - Method in interface nxopen.features.GlobalShapingBuilder
Returns the flip base udirection
License requirements: None.
flipBaseVDirection() - Method in interface nxopen.features.GlobalShapingBuilder
Returns the flip base vdirection
License requirements: None.
flipChamferOffsets() - Method in interface nxopen.features.ResizeChamferBuilder
Returns the flip flag
License requirements: None.
flipComponent() - Method in interface nxopen.formboard.FlipComponentBuilder
Flips the selected formboard component by rotation angle about selected axis.
flipComponent(Component) - Method in interface nxopen.routing.Run
Flips a component that is part of a run by rotating the component so that it's input and output ports reverse.
FlipComponentBuilder - Interface in nxopen.formboard
Builder for flip component operation used in formboard.
FlipComponentBuilder.AxisType - Class in nxopen.formboard
Enum for the selection of axis type for flipping formboard component
flipControlNormalDirection() - Method in interface nxopen.features.GlobalShapingBuilder
Returns the flip control normal direction
License requirements: None.
flipControlUDirection() - Method in interface nxopen.features.GlobalShapingBuilder
Returns the flip control udirection
License requirements: None.
flipControlVDirection() - Method in interface nxopen.features.GlobalShapingBuilder
Returns the flip control vdirection
License requirements: None.
flipDiagonals() - Method in interface nxopen.cae.MappedMeshBuilder
Returns the flip diagonals option
License requirements: None.
flipDirection() - Method in interface nxopen.annotations.LineWeldBuilder
Returns the flip direction for top seam
License requirements: None.
flipDirection() - Method in interface nxopen.cae.DependentMeshListItemBuilder
Returns the flip direction
License requirements: nx_masterfem ("Finite Element Modeling")
.
flipDirection() - Method in interface nxopen.cae.ManualSweepBetweenListItemSelection
Returns the flip direction
License requirements: nx_masterfem ("Finite Element Modeling")
.
flipDirection() - Method in interface nxopen.cae.MeshManualSweepBetweenListItemSelection
Returns the flip direction
License requirements: nx_masterfem ("Finite Element Modeling")
.
flipDirection() - Method in interface nxopen.cam.BoundaryTurnBlank
Returns the flip direction flag
License requirements: None.
flipDirection() - Method in interface nxopen.features.EmbossTarget
Returns the flip flag for translation direction
License requirements: None.
flipDirection() - Method in interface nxopen.features.shipdesign.PlateBuilder
Returns the flip direction, which can change the plate thickness direction.
flipDirection() - Method in interface nxopen.geometricutilities.FaceSetOffset
Flip offset direction.
flipDirection() - Method in interface nxopen.weld.JointmarkPointsBuilder
Returns the flip of Z axis.
flipDirectionOption() - Method in interface nxopen.cae.Mesh1dBuilder
Returns the auto chain option
License requirements: nx_masterfem ("Finite Element Modeling")
.
flipDiscardRegion - Variable in class nxopen.uf.UFModl.SmcutoutData
 
flipDiscardRegion - Variable in class nxopen.uf.UFModl.SmpunchData
 
flipFaceChainDirectionSense(Face) - Method in interface nxopen.features.ExtractFaceBuilder
Flip the face chain direction sense
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT")
.
flipHorizontal() - Method in interface nxopen.annotations.LineWeldBuilder
Returns the flip horizontal direction for side seam
License requirements: None.
flipHorizontal() - Method in interface nxopen.display.ImageBaseBuilder
Flips the image horizontally.
flipImageAboutHeight(Tag) - Method in interface nxopen.uf.UFDrf
Refer to UF_DRF_flip_image_about_height for documentation.
flipImageAboutWidth(Tag) - Method in interface nxopen.uf.UFDrf
Refer to UF_DRF_flip_image_about_width for documentation.
flipJoggleSide() - Method in interface nxopen.features.sheetmetal.AeroJoggleBuilder
Returns the joggle direction flag.
flipMaterial() - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder
Flip material side
License requirements: cam_base ("CAM BASE")
.
flipMaterial() - Method in interface nxopen.cam.DmSurfBuilder
The method to flip material side
License requirements: cam_base ("CAM BASE")
.
flipNormal() - Method in interface nxopen.Sketch
Flips the outward normal vector of the sketch
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
flipNormals() - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder
Returns the option to flip the element normals for the extrusion process
License requirements: None.
flipOffset(NXObject) - Method in interface nxopen.features.AOCSBuilder
Reverse the offset direction.
flipOffsetCurveDirection(ICurve, Point3d, boolean) - Method in interface nxopen.features.Offset3DCurveBuilder
Routine to store the output curves and the flip logical in the builder
License requirements: solid_modeling ("SOLIDS MODELING")
.
FlipOption - Class in nxopen.annotations
Specifies the custom symbol flip option.
flipPath() - Method in interface nxopen.cae.EdgePathMethod
Flip the path start and end.
flipPath() - Method in interface nxopen.cae.ElemEdgePathMethod
Flip the path start and end.
flipPath() - Method in interface nxopen.geometricutilities.BlendStopshortBuilder
Flip the builder path for BlendStopshortBuilder
License requirements: solid_modeling ("SOLIDS MODELING")

Created in NX8.0.0
FLIPPED - Static variable in class nxopen.features.shipdesign.ProfileCutoutBuilder.Orientation
flipped
FLIPPED - Static variable in class nxopen.routing.Flip
Profile is flipped.
flipRange() - Method in interface nxopen.facet.SewFacetBodyBuilder
Flip the range between the first and second vertex
License requirements: None.
flipRange1() - Method in interface nxopen.facet.BridgeFacetBodyBuilder
Flip the range between the first and second vertex on the first facet body
License requirements: None.
flipRange2() - Method in interface nxopen.facet.BridgeFacetBodyBuilder
Flip the range between the first and second vertex on the second facet body
License requirements: None.
flipReferenceDirection() - Method in interface nxopen.Sketch
Flips the reference direction of the sketch
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
flipState() - Method in interface nxopen.cae.ElementExtrudeBuilder
Returns the flip state from the builder
License requirements: nx_masterfem ("Finite Element Modeling")
.
flipState() - Method in interface nxopen.cae.ElementProjectBuilder
Returns the flip state from the builder
License requirements: nx_masterfem ("Finite Element Modeling")
.
flipState() - Method in interface nxopen.cae.ElementTranslateBuilder
Returns the flip state from the builder
License requirements: nx_masterfem ("Finite Element Modeling")
.
flipState() - Method in interface nxopen.cae.WeldBuilder
Returns the flip state of the selected edge(s)
License requirements: nx_masterfem ("Finite Element Modeling")
.
flipStock() - Method in interface nxopen.routing.OverstockBuilder
Returns the stock flip flag
License requirements: routing_advanced ("Routing Advanced") OR routing_harness ("Routing Harness") OR routing_cabling ("Routing Cabling") OR routing_pipetube ("Routing Piping and Tubing") OR routing_hvac ("Routing HVAC") OR routing_platform ("Routing Platform") OR routing_pid ("Routing PID")
.
flipStock() - Method in interface nxopen.routing.StockBuilder
Returns the stock flip flag
License requirements: routing_base ("Routing Basic")
.
flipSymbol(FlipOption) - Method in interface nxopen.annotations.BaseCustomSymbol
Flips the custom symbol horizontally/vertically.
flipTargetCurveOrientation() - Method in interface nxopen.features.MatchEdgeBuilder
Returns the target curve projection orientation
License requirements: features_modeling ("FEATURES MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
flipThicknessDirection(boolean) - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
Deprecated.
Deprecated in NX8.0.3. Use StandardPartFrameworkBuilder .ModifySpreadSheetData() instead.
flipToolAroundHolder() - Method in interface nxopen.cam.TurningOperationBuilder
Returns the Flip Tool Around Holder toggle
License requirements: None.
flipToolAroundHolder() - Method in interface nxopen.cam.TurnToolProbingBuilder
Returns the Flip Tool Around Holder toggle
License requirements: None.
flipTrimDirection() - Method in interface nxopen.tooling.BendInsertDesignBuilder
Returns the flip trim feature direction of insert.
flipTrimmedSheet() - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
Flip the trimmed bounded plane or the enlarged surface for parting surface.
flipVertical() - Method in interface nxopen.annotations.LineWeldBuilder
Returns the flip vertical direction for side seam
License requirements: None.
flipVertical() - Method in interface nxopen.display.ImageBaseBuilder
Flips the image vertically.
flipView() - Method in interface nxopen.routing.electrical.CablewaysLayoutView
Flips the layout view along view direction.
flipViewDirection() - Method in interface nxopen.features.shipdesign.SectionViewBuilder
Returns the option to specify whether to flip the view direction or not
License requirements: None.
flipZAxis() - Method in interface nxopen.weld.WeldPointBuilder
Flip the z axis
License requirements: ugweld ("UG WELD")
.
FLOAT - Static variable in class nxopen.annotations.TableCellStyleBuilder.CellFormatTypes
Float
FLOAT - Static variable in class nxopen.annotations.TableCellStyleBuilder.FormatType
Deprecated.
 
FLOAT - Static variable in class nxopen.mechatronics.ExternalConnectionElementBuilder.DataType
float
FLOAT - Static variable in class nxopen.mechatronics.OPCClientBuilder.TagDataType
float type
FLOAT - Static variable in class nxopen.pdm.PdmSoaqueryNxmgrfielddatatype
Float
FLOATING - Static variable in class nxopen.cam.DrillTapToolBuilder.ToolTapHolderTypeTypes
floating
floor() - Method in interface nxopen.cam.DmCmMultiplePassesCiBuilder
Returns the Floor
License requirements: cam_base ("CAM BASE")
.
FLOOR_AND_CRITICAL_DEPTH - Static variable in class nxopen.cam.CutLevelPlanar.Types
Floor, Then Critical Depths
FLOOR_FIRST - Static variable in class nxopen.cam.DmCmMultiplePassesCiBuilder.OrderType
Floor First
FLOOR_NOT_UP_TO_DATE - Static variable in class nxopen.cam.CAMObject.Attr
 
FLOOR_ONLY - Static variable in class nxopen.cam.CutLevelPlanar.Types
Floor Only
FLOOR_TO_CEILING - Static variable in class nxopen.cam.GrooveMillingBuilder.LevelSequencingType
Floor to Ceiling
floorFaces() - Method in interface nxopen.cam.FeatureRecognitionBuilder
Returns the floor faces
License requirements: None.
floorFaces() - Method in interface nxopen.features.AnalyzePocketBuilder
Returns the collector of floor faces.
floorFaces() - Method in interface nxopen.features.BlendPocketBuilder
Returns the collector of floor faces.
floorHeightDim() - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder
Returns the dimension expression for floor height
License requirements: None.
floorIncrementBuilder() - Method in interface nxopen.cam.DmCmMultiplePassesCiBuilder
Returns the builder of Floor Increment
License requirements: None.
floorNumberPassesBuilder() - Method in interface nxopen.cam.DmCmMultiplePassesCiBuilder
Returns the builder of Floor Number of Passes
License requirements: None.
floorOrientationType() - Method in interface nxopen.display.Stage
Returns the floor orientation define
License requirements: None.
floorOverlap() - Method in interface nxopen.cam.DriveMode
Returns the Floor Overlap Distance
License requirements: None.
floorPlane() - Method in interface nxopen.cam.GeometryCiBuilder
Returns the floor plane
License requirements: None.
floorRad - Variable in class nxopen.uf.UFModlFeatures.AskCylPocketParmsData
 
floorRad - Variable in class nxopen.uf.UFModlFeatures.AskRectPocketParmsData
 
floorSameAsPartStock() - Method in interface nxopen.cam.MillCutParameters
Returns the floor same as part stock
License requirements: None.
floorStepMethodBuilder() - Method in interface nxopen.cam.DmCmMultiplePassesCiBuilder
Returns the Floor Step Method Builder
License requirements: cam_base ("CAM BASE")
.
floorStock() - Method in interface nxopen.cam.CutVolume
Returns the floor stock
License requirements: None.
floorStock() - Method in interface nxopen.cam.MillCutParameters
Returns the floor stock
License requirements: None.
floorStockOffsetBuilder() - Method in interface nxopen.cam.DmCmMultiplePassesCiBuilder
Returns the builder of Floor Stock Offset
License requirements: None.
floorThickness() - Method in interface nxopen.die.HeelpostBuilder
Returns the floor thickness
License requirements: None.
floorXaxis() - Method in interface nxopen.display.Stage
The stage's bottom wall to align with the WCS x-axis
License requirements: None.
floorYaxis() - Method in interface nxopen.display.Stage
The stage's bottom wall to align with the WCS y-axis
License requirements: None.
floorZaxis() - Method in interface nxopen.display.Stage
The stage's bottom wall to align with the WCS z-axis
License requirements: None.
FLOW - Static variable in class nxopen.cae.SimResultReference.Type
flow result
flow() - Method in interface nxopen.die.DrawBeadSegmentBuilder
Returns the value identifying if the segment is of flow type (the top radius is half the width).
FLOW_CUT - Static variable in class nxopen.cam.SurfaceContourBuilder.DriveMethodTypes
Flow Cut
FLOW_POLYGON_BODIES - Static variable in class nxopen.DisplayManager.ShowHideType
Show or hide flow polygon bodies
FLOW_TYPE_MISMATCH - Static variable in class nxopen.routing.Run.FlipStatus
Ports are defined with ambiguous flow types.
FlowAnalysisBuilder - Interface in nxopen.tooling
Represents the builder which is used to create flow analysis.
flowArrowParameterA() - Method in interface nxopen.preferences.RoutingLogical
Returns the application view flow arrow parameter A
License requirements: routing_pid ("Routing PID")
.
flowArrowParameterB() - Method in interface nxopen.preferences.RoutingLogical
Returns the application view flow arrow parameter B
License requirements: routing_pid ("Routing PID")
.
flowArrowType() - Method in interface nxopen.preferences.RoutingLogical
Returns the application view flow arrow type
License requirements: routing_pid ("Routing PID")
.
FlowBlend - Interface in nxopen.features
Represents a flow blend feature
To create or edit an instance of this class, use FlowBlendBuilder

Created in NX10.0.0
FlowBlendBuilder - Interface in nxopen.features
Represents a FlowBlend builder
To create a new instance of this class, use FeatureCollection.createFlowBlendBuilder(nxopen.features.FlowBlend)
Default values.
FlowBuilder - Interface in nxopen.cam
Represents a FlowBuilder Builder
This is an abstract class and cannot be instantiated.
flowBuilder() - Method in interface nxopen.cam.SurfaceContourBuilder
Returns the Flow Cut Drive Method builder
License requirements: None.
FlowBuilder.FlowEditTypes - Class in nxopen.cam
Available types for Flow Cut/Manual Assembly in scop
FlowBuilder.FlowOffsetModeType - Class in nxopen.cam
Available types for Flow Cut/Offset Mode in scop
flowControl - Variable in class nxopen.uf.UFModl.MatchedgeData
 
flowCurveList() - Method in interface nxopen.cam.DPMItpBuilder
Returns the Flow Curve List
License requirements: None.
FLOWCUT_BOTH - Static variable in class nxopen.cam.SurfaceContourBuilder.CleanupTypes
 
FLOWCUT_CONTACTS - Static variable in class nxopen.cam.SurfaceContourBuilder.CleanupTypes
 
FLOWCUT_TOOLEND - Static variable in class nxopen.cam.SurfaceContourBuilder.CleanupTypes
 
flowCutDirection() - Method in interface nxopen.cam.FlowCutSteepContainment
Returns the Cut Direction
License requirements: None.
FlowCutSteepContainment - Interface in nxopen.cam
Represents a Steep Containment Builder .
FlowCutSteepContainment.CutDirectionTypes - Class in nxopen.cam
Available types for Cut Direction in Flow Cut
FlowCutSteepContainment.CutLevelTypes - Class in nxopen.cam
cut level types .
FlowCutSteepContainment.PatternDirectionTypes - Class in nxopen.cam
Available types for Pattern Direction in Flow Cut
FlowCutSteepContainment.SteepCutDirectionTypes - Class in nxopen.cam
Available types for Steep Cut Direct in Flow Cut
flowDirection() - Method in interface nxopen.die.LineupBuilder
Returns the flow direction of the lineup
License requirements: die_engineering ("DIE ENGINEERING")
.
flowDirection() - Method in interface nxopen.features.NSidedSurfaceBuilder
Returns the flow direction
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
flowDirection() - Method in interface nxopen.features.StudioSurfaceBuilder
Returns the flow direction
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
flowDirection() - Method in interface nxopen.features.ThroughCurvesBuilder
Returns the flow direction.
FlowDisplayBuilder - Interface in nxopen.tooling
Represents the builder which is used to create flow analysis.
FlowDisplayBuilder.AnalysisResults - Class in nxopen.tooling
The option of analysis results.
flowEdit() - Method in interface nxopen.cam.FlowBuilder
Returns the Manual Assembly
License requirements: None.
flowOffsetMode() - Method in interface nxopen.cam.FlowBuilder
Returns the Flow Cut/Offset Mode
License requirements: None.
flowOverlapDistBuilder() - Method in interface nxopen.cam.FlowBuilder
Returns the flow overlap distance
License requirements: None.
flowType() - Method in interface nxopen.routing.SplitDuctBuilder
Returns the type of flow to be displayed in the list flow column
License requirements: routing_hvac ("Routing HVAC")
.
fltr() - Method in interface nxopen.UFSession
 
FLUENCE - Static variable in class nxopen.cae.Result.Quantity
 
FLUID - Static variable in class nxopen.PhysicalMaterial.Type
Fluid
FLUID_DENSITY - Static variable in class nxopen.cae.Result.Quantity
 
FLUID_MESH - Static variable in class nxopen.cae.Result.Quantity
 
FLUID_SCALAR - Static variable in class nxopen.cae.Result.Quantity
 
FLUID_TEMPERATURE - Static variable in class nxopen.cae.Result.Quantity
 
FluidDomainBuilder - Interface in nxopen.cae
Represents a FluidDomainRecipe
To create a new instance of this class, use FluidDomainCollection.createBuilder(nxopen.cae.FluidDomainRecipe)
Default values.
FluidDomainBuilder.IntExtType - Class in nxopen.cae
Represents the interior/exterior types.
FluidDomainCollection - Interface in nxopen.cae
Provides methods for managing fluid domainsFluidDomainRecipe in a fem part
To obtain an instance of this class, refer to BaseFEModel

Created in NX7.5.2
FluidDomainRecipe - Interface in nxopen.cae
Represents a FluidDomainRecipe
To create or edit an instance of this class, use FluidDomainBuilder

Created in NX8.0.0
fluidDomains() - Method in interface nxopen.cae.BaseFEModel
Returns the fluid domain collection belonging to this fem part .
FLUSH - Static variable in class nxopen.annotations.LineWeldDataBuilder.ContourSymbolType
 
FLUSH - Static variable in class nxopen.annotations.SupplementarySymbol
Specifies flush supplementary weld symbol
Flush() - Constructor for class nxopen.uf.UFPath.Flush
 
Flush(UFPath.FlushType, UFPath.Guide, UFPath.Pressure, boolean, boolean, boolean) - Constructor for class nxopen.uf.UFPath.Flush
 
FLUSH - Static variable in class nxopen.weld.FilletBuilder.EnumContour
 
FLUSH - Static variable in class nxopen.weld.PlugSlotBuilder.EnumContour
 
FLUSH - Static variable in class nxopen.weld.WeldGrooveBuilder.Contour
Flush
FLUSH_OFF - Static variable in class nxopen.uf.UFPath.FlushType
 
FLUSH_ON - Static variable in class nxopen.uf.UFPath.FlushType
 
FLUSH_TYPE_LAST_ELEMENT - Static variable in class nxopen.uf.UFPath.FlushType
 
flushingGuide - Variable in class nxopen.uf.UFPath.Flush
 
flushingPressure - Variable in class nxopen.uf.UFPath.Flush
 
FLUSHNESS_ONLY - Static variable in class nxopen.geometricanalysis.GapFlushnessBuilder.DisplayOptions
flushness only
flushRegister - Variable in class nxopen.uf.UFPath.Flush
 
flushType - Variable in class nxopen.uf.UFPath.Flush
 
fluteLength() - Method in interface nxopen.features.AnalyzePocketBuilder
Returns the flute length defines the length of the flute of T Cutter.
fluteLength() - Method in interface nxopen.features.BlendPocketBuilder
Returns the flute length defines the length of the flute of T Cutter.
FMBD_FILE_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
 
FMBD_FILE_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
 
FNR - Static variable in class nxopen.cam.GrooveToolBuilder.InsertShapes
Full nose radius groove tool
FOAM - Static variable in class nxopen.PhysicalMaterial.Type
Foam
FOAMTESTDATA - Static variable in class nxopen.PhysicalMaterial.Type
Foam - test data option
focalDiameter() - Method in interface nxopen.cam.LaserTool
Returns the Focal Diameter
License requirements: None.
focalDistance() - Method in interface nxopen.cam.LaserTool
Returns the Focal Distance
License requirements: None.
focalDistance() - Method in interface nxopen.display.CameraBuilder
Returns the focal distance
License requirements: None.
focalLength() - Method in interface nxopen.Parabola
Returns the focal length.
focus() - Method in interface nxopen.blockstyler.UIBlock
Focuses on the block.
focus() - Method in interface nxopen.uistyler.MultiSelectList
Indicates that this dialog item is receiving keyboard focus.
focusNotify(UIBlock, boolean) - Method in interface nxopen.blockstyler.BlockDialog.FocusNotify
Focus notify callback.
fogBack - Variable in class nxopen.uf.UFView.FogOptions
 
fogBack - Variable in class nxopen.uf.UFView.Visualization
 
fogBackgroundColor() - Method in interface nxopen.preferences.ViewVisualizationSpecialEffects
Returns the use background color flag.
fogBackValue() - Method in interface nxopen.preferences.ViewVisualizationSpecialEffects
Returns the fog back scale value.
fogColor - Variable in class nxopen.preferences.ViewVisualizationSpecialEffects.FogData
Fog Color
fogColor - Variable in class nxopen.uf.UFView.FogOptions
 
fogColor - Variable in class nxopen.uf.UFView.Visualization
 
fogColorFlag - Variable in class nxopen.preferences.ViewVisualizationSpecialEffects.FogData
If true fog color is applied to the view
fogColorHLSValue() - Method in interface nxopen.preferences.ViewVisualizationSpecialEffects
Returns the value of HLS color pattern
License requirements: None.
fogColorHSVValue() - Method in interface nxopen.preferences.ViewVisualizationSpecialEffects
Returns the value of HSV color pattern
License requirements: None.
fogColorRGBValue() - Method in interface nxopen.preferences.ViewVisualizationSpecialEffects
Returns the value of RGB color pattern
License requirements: None.
FogData() - Constructor for class nxopen.preferences.ViewVisualizationSpecialEffects.FogData
 
FogData(int, boolean, ViewVisualizationSpecialEffects.ColorRGB, double, double, double) - Constructor for class nxopen.preferences.ViewVisualizationSpecialEffects.FogData
Constructor for the FogData object.
fogDensity - Variable in class nxopen.preferences.ViewVisualizationSpecialEffects.FogData
Density of fog
fogEnd - Variable in class nxopen.preferences.ViewVisualizationSpecialEffects.FogData
End of fog
fogFront - Variable in class nxopen.uf.UFView.FogOptions
 
fogFront - Variable in class nxopen.uf.UFView.Visualization
 
fogFrontValue() - Method in interface nxopen.preferences.ViewVisualizationSpecialEffects
Returns the fog front scale value.
fogMode - Variable in class nxopen.preferences.ViewVisualizationSpecialEffects.FogData
Fog mode
fogMode - Variable in class nxopen.uf.UFView.FogOptions
 
fogMode - Variable in class nxopen.uf.UFView.Visualization
 
FogOptions() - Constructor for class nxopen.uf.UFView.FogOptions
 
FogOptions(int, double[], double, double, double) - Constructor for class nxopen.uf.UFView.FogOptions
 
fogRate - Variable in class nxopen.uf.UFView.FogOptions
 
fogRate - Variable in class nxopen.uf.UFView.Visualization
 
fogRateValue() - Method in interface nxopen.preferences.ViewVisualizationSpecialEffects
Returns the fog rate value.
fogSetting() - Method in interface nxopen.preferences.ViewVisualizationSpecialEffects
Returns the fog setting type
License requirements: None.
fogSettingOption() - Method in interface nxopen.preferences.ViewVisualizationSpecialEffects
Returns the fog option.
fogStart - Variable in class nxopen.preferences.ViewVisualizationSpecialEffects.FogData
Start of fog
FOLD - Static variable in class nxopen.features.sheetmetal.BridgeTransitionBuilder.TypeOptions
Bridge Transition type consisting of Planar-Bend-Planar regions.
FOLD_JOINT - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSymbolType
 
FOLD_JOINT - Static variable in class nxopen.annotations.Symbol
Specifies fold joint weld symbol (ISO and DIN only, only on one side of reference line)
foldAngle - Variable in class nxopen.uf.UFDrf.FoldedRadiusInfo
 
FOLDED_RADIUS - Static variable in class nxopen.annotations.DimensionType
Folded Radius dimension
FOLDED_SXLINE - Static variable in class nxopen.uf.UFDraw.SxlineType
 
foldedEdges() - Method in interface nxopen.facet.CleanupFacetBodyBuilder
Returns the folded edges option
License requirements: None.
foldedRadiusAngle() - Method in interface nxopen.annotations.DiameterRadiusPreferences
Returns the interior angle for folded radius type dimension
License requirements: None.
foldedRadiusAngle() - Method in interface nxopen.annotations.RadialStyleBuilder
Returns the folded radius angle
License requirements: None.
foldedRadiusAngle - Variable in class nxopen.uf.UFDrf.DiameterRadiusPreferences
 
FoldedRadiusDimension - Interface in nxopen.annotations
Represents a folded radius dimension
To create or edit an instance of this class, use RadialDimensionBuilder

Created in NX4.0.0
FoldedRadiusInfo() - Constructor for class nxopen.uf.UFDrf.FoldedRadiusInfo
 
FoldedRadiusInfo(double[], double, double) - Constructor for class nxopen.uf.UFDrf.FoldedRadiusInfo
 
foldedToggle() - Method in interface nxopen.drawings.SketchSectionLineBuilder
Returns the folded toggle
License requirements: None.
FOLDER - Static variable in class nxopen.annotations.ImportAutocadBlockBuilder.FileFolder
Folder Selection mode
FOLDER - Static variable in class nxopen.annotations.ImportSymbolBuilder.FileFolder
Folder Selection mode
folder() - Method in interface nxopen.drafting.DrawingCreationWizardBuilder
Returns the folder.
folderBrowser() - Method in interface nxopen.tooling.FlowDisplayBuilder
Returns the folder in which flow analysis results can be found
License requirements: None.
folderContents - Variable in class nxopen.uf.UFUgmgr.ListFolderContentsData
 
folderName() - Method in interface nxopen.layout2d.LocalDefinitionFolderBuilder
Returns the current folder name
License requirements: nx_layout ("NX Layout")
.
FolderSelection - Interface in nxopen.blockstyler
Represents Folder Selection With Browse block .
folderType() - Method in interface nxopen.cae.SimLbcFolder
Returns the folder type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
folderType() - Method in interface nxopen.issue.IssueFolder
Returns the folder type
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.
foldLocation() - Method in interface nxopen.annotations.BaseRadialDimensionBuilder
Returns the fold location
License requirements: None.
foldLocation() - Method in interface nxopen.routing.RouteSweptFoldBuilder
Returns the fold location
License requirements: routing_harness ("Routing Harness")
.
foldLocation - Variable in class nxopen.uf.UFDrf.FoldedRadiusInfo
 
foldOffset - Variable in class nxopen.uf.UFDrf.FoldedRadiusInfo
 
foldRotationAngle() - Method in interface nxopen.routing.RouteSweptFoldBuilder
Returns the fold rotation angle
License requirements: routing_harness ("Routing Harness")
.
foldStartRotationAngle() - Method in interface nxopen.routing.RouteSweptFoldBuilder
Returns the fold start rotation angle
License requirements: routing_harness ("Routing Harness")
.
FOLIO - Static variable in class nxopen.PrintBuilder.PaperSize
Folio, 8 1/2- by 13-inch paper
FOLLOW - Static variable in class nxopen.cam.AcrossVoids.MotionTypes
Follow
FOLLOW_BLADE_UV - Static variable in class nxopen.cam.ToolAxisAdvanced.Type
Follow Blade UV
FOLLOW_BOUNDARY - Static variable in class nxopen.cam.NcmPlanarBuilder.TransferWithinLevelsWiths
follow boundary (for future use)
FOLLOW_CSYS - Static variable in class nxopen.geometricutilities.PatternOrientation.Enum
follow CSYS orientation, for general pattern type, when from/to is CSYS.
FOLLOW_FILLET - Static variable in class nxopen.SelectionIntentRule.RuleType
See documentation for FollowFilletRule for more details
FOLLOW_LAST_DEFINED - Static variable in class nxopen.HumanData.InverseKinematicsHeadEyeType
Indicate the position of head and eye follow the last defined position
FOLLOW_PART - Static variable in class nxopen.cam.CutPatternBuilder.Types
Follow Part
FOLLOW_PART - Static variable in class nxopen.cam.TurnGrooveCornerControl.CornerTypes
Groove Corner Control corner type is Follow Part.
FOLLOW_PATTERN - Static variable in class nxopen.geometricutilities.PatternOrientation.Enum
follow pattern orientation, for example, circular pattern type.
FOLLOW_PERIPHERY - Static variable in class nxopen.cam.CutPatternBuilder.Types
Follow Periphery
FOLLOW_PERIPHERY - Static variable in class nxopen.cam.DmAmBuilder.AmCutPatternTypes
Follow Periphery
FOLLOW_PERIPHERY - Static variable in class nxopen.cam.DmBndBuilder.BndCutPatternTypes
Follow Periphery
FOLLOW_PERIPHERY - Static variable in class nxopen.cam.DmSurfBuilder.DmSurfCutPatternType
None
FOLLOW_SHORTEST_PATH - Static variable in class nxopen.mechatronics.PositionControlBuilder.AngularPathOptions
follow shortest path
FOLLOW_SHOULDER - Static variable in class nxopen.cam.CutParametersCleanupControlTypes
Cleanup control: Follow Shoulder
FOLLOW_WALL_BOTTOM - Static variable in class nxopen.cam.PlanarOperationBuilder.AutomaticPartBoundaryMethodTypes
Follow Bottom
FOLLOW_WALL_TOP - Static variable in class nxopen.cam.PlanarOperationBuilder.AutomaticPartBoundaryMethodTypes
Follow Top
FOLLOW_WITH - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ProcessActionBinder
The process action for binder is follow with other draw components.
FOLLOW_WITH - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ProcessActionDie
The process action for die is follow with other draw components.
FOLLOW_WITH - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ProcessActionPunch
The process action for punch is follow with other draw components.
followCheck() - Method in interface nxopen.cam.MillCutParameters
Returns the follow check geometry status
License requirements: None.
followCurve() - Method in interface nxopen.routing.ISegment
Returns the segment follow curve.
FollowCurveMoveBuilder - Interface in nxopen.cam
Represents the Follow Curve Move Builder
To create a new instance of this class, use MoveCollection.createFollowCurveMoveBuilder(nxopen.cam.Move)
Default values.
followFaceProjDirOption() - Method in interface nxopen.geometricutilities.PatternOrientation
Returns the followFaceProjDirOption, an enum for follow face project direction.
followFaceSelection() - Method in interface nxopen.geometricutilities.PatternOrientation
Returns the followFaceSelection, a sc collector to store selected faces.
followFaceToggle() - Method in interface nxopen.geometricutilities.PatternOrientation
Returns the followFaceToggle, a logical flag to indicate if the we need to modify the orientation to follow selected faces.
followFillet() - Method in interface nxopen.blockstyler.SectionBuilder
Returns the FollowFillet
License requirements: None.
followFillet() - Method in interface nxopen.blockstyler.SuperSection
Returns the FollowFillet
License requirements: None.
FollowFilletRule - Interface in nxopen
Represents a SelectionIntentRule that collects curves/edges which are connected or tangent connected and follow onto and off an untrimmed fillet.
FollowFilletRule.Data - Class in nxopen
This class holds the data returned from FollowFilletRule.getData()
FollowFilletRuleType - Class in nxopen
Selection Intent method to use with follow fillet rule.
followFoot() - Method in interface nxopen.features.HumanBuilder
Returns the status of follow foot move for dynamic drag of left foot or right foot.
FollowGeometryMoveBuilder - Interface in nxopen.cam
Represents the Follow Geometry Move Builder
This is an abstract class, and cannot be created.
followNonVerticalWalls() - Method in interface nxopen.cam.VolumeBased25DMillingOperationBuilder
Returns the follow non-vertical walls flag
License requirements: None.
FollowPartMoveBuilder - Interface in nxopen.cam
Represents the Follow Part Move Builder
To create a new instance of this class, use MoveCollection.createFollowPartMoveBuilder(nxopen.cam.Move)
Default values.
FollowPartMoveBuilder.MoveDirectionTypes - Class in nxopen.cam
Available types for manual move path direction in GMC operation
FOLLOWS_FLOW - Static variable in class nxopen.routing.Run.FlipStatus
Ports correctly aligned with flow.
followWallBottom() - Method in interface nxopen.cam.DmCmBuilder
Returns the Follow Wall Bottom
License requirements: None.
font() - Method in interface nxopen.annotations.CuttingPlaneSymbolBuilder
Returns the font
License requirements: None.
font() - Method in interface nxopen.annotations.EditSymbolDisplayBuilder
Returns the enum font
License requirements: None.
font - Variable in class nxopen.annotations.LineCfw
Line font (solid, dashed, etc)
font - Variable in class nxopen.annotations.TextCfw
Character font (blockfont, etc).
font - Variable in class nxopen.cae.modelcheck.ElementEdgeCheckBuilder.EdgeDisplayStyle
line font
font - Variable in class nxopen.cae.Post.Text
 
font() - Method in interface nxopen.cae.xyplot.BaseLineStyleSetting
Returns the line font
License requirements: None.
font() - Method in interface nxopen.cae.xyplot.TextStyleSetting
Returns the text font
License requirements: None.
font() - Method in interface nxopen.drawings.SectionLineStyleBuilder
Deprecated.
Deprecated in NX10.0.0. Use ViewSectionLineBuilder.lineColorFontWidth() instead.
font() - Method in interface nxopen.drawings.ViewStyleFPCurvesBuilder
Returns the font on the Curve section of the Flat Pattern tab of the View Style Dialog
License requirements: None.
font() - Method in interface nxopen.drawings.ViewStyleHiddenLinesBuilder
Returns the font on the HIDDEN LINES tab of the View Style Dialog
License requirements: None.
font() - Method in interface nxopen.drawings.ViewStyleSmoothEdgesBuilder
Returns the font on the SMOOTH EDGES tab of the View Style Dialog
License requirements: None.
font() - Method in interface nxopen.drawings.ViewStyleVirtualIntersectionsBuilder
Returns the font on the VIRTUAL INTERSECTIONS tab of the View Style Dialog
License requirements: None.
font() - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder
Returns the default font to use for the current ship structure type.
font() - Method in interface nxopen.features.TextBuilder
Returns the font
License requirements: None.
Font - Class in nxopen.preferences
Represents the line font
font() - Method in interface nxopen.preferences.PartDrafting
Returns the line font of the retained nxopen.annotations.Annotation objects
License requirements: None.
font - Variable in class nxopen.preferences.PartFlexiblePrintedCircuitDesign.FlatPatternObjectTypeDisplay
Object font
font - Variable in class nxopen.preferences.PartSheetmetal.FlatPatternObjectTypeDisplay
Object font
font - Variable in class nxopen.sheetmetal.FlatPatternSettings.FlatPatternObjectTypeDisplay
Object font
font - Variable in class nxopen.uf.UFDisp.ConeheadAttrbSTag
 
font - Variable in class nxopen.uf.UFDisp.SystemParams
 
font - Variable in class nxopen.uf.UFDrf.AskRetainColorFontWidthData
 
font - Variable in class nxopen.uf.UFDrf.Cfw
 
font - Variable in class nxopen.uf.UFDrf.TextCfw
 
font - Variable in class nxopen.uf.UFObj.DispProps
 
font - Variable in class nxopen.uf.UFView.VdeData
 
font - Variable in class nxopen.uf.UFView.VdeDataAndType
 
FontCollection - Interface in nxopen
Represents a collection of typographical fonts (for example, Arial, OldEnglish)
To obtain an instance of this class, refer to BasePart

Created in NX3.0.0
FontCollection.Type - Class in nxopen
Specifies the type of font
FontEnum - Class in nxopen.drawings
the font
fontfamily - Variable in class nxopen.preferences.VisualizationFonts.DefaultStandardTextFontData
the name of the font family
FontHeader() - Constructor for class nxopen.uf.UFUgfont.FontHeader
 
FontHeader(int, int, int, int, int, int, int, int, int, double, double, double, int) - Constructor for class nxopen.uf.UFUgfont.FontHeader
 
fontInfo - Variable in class nxopen.uf.UFDrf.AskUdSymbolFontInfoData
 
fonts() - Method in interface nxopen.BasePart
Returns the FontCollection instance belonging to this part .
fonts - Variable in class nxopen.uf.UFCgm.ExportOptions
 
fontScaling() - Method in interface nxopen.cae.PostAnnotationPreference
Returns the annotation font scaling toggle
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
fontsize - Variable in class nxopen.preferences.VisualizationFonts.DefaultStandardTextFontData
the font size in points (72 points per inch)
fontSize - Variable in class nxopen.uf.UFSfLegend.Attr
 
fontStyle() - Method in interface nxopen.cae.xyplot.TextStyleSetting
Returns the text font style.
fontStyle() - Method in interface nxopen.display.TransientText
Returns the style of font to be used to display the transient text.
fontStyle() - Method in interface nxopen.features.TextBuilder
Returns the font style
License requirements: None.
fontstyle - Variable in class nxopen.preferences.VisualizationFonts.DefaultStandardTextFontData
the font style
Fonttype - Class in nxopen.cae.xyplot
Represents the font type
fontType() - Method in interface nxopen.cae.xyplot.TextStyleSetting
Returns the text font type
License requirements: None.
fontValue() - Method in interface nxopen.blockstyler.TextColorFontWidth
Returns the font value
License requirements: None.
FOOT - Static variable in class nxopen.HumanData.HandFootType
Indicate the foot
FOOT - Static variable in class nxopen.HumanData.SegmentScalingType
Indicate scaling of foot
FOOT_BREADTH - Static variable in class nxopen.HumanData.AdvancedScalingType
Indicate scaling of foot_breadth
FOOT_LENGTH - Static variable in class nxopen.HumanData.AdvancedScalingType
Indicate scaling of foot_length
footer - Variable in class nxopen.uf.UFSfLegend.Attr
 
force() - Method in interface nxopen.bodydes.OnestepUnformBuilder
Returns the force on blank holder.
FORCE - Static variable in class nxopen.cae.XyFunctionMeasure
Force unit
FORCE - Static variable in class nxopen.mechatronics.BreakingConstraintBuilder.BreakingModeType
Force
FORCE - Static variable in class nxopen.motion.GraphBuilder.RequestChoices
Force
FORCE - Static variable in class nxopen.motion.MotionSensorBuilder.Types
 
FORCE - Static variable in class nxopen.Scalar.DimensionalityType
 
FORCE - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ProcessActionBinder
The process action for binder is by force.
FORCE - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ProcessActionDie
The process action for die is by force.
FORCE - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ProcessActionPunch
The process action for punch is by force.
FORCE_BF - Static variable in class nxopen.cae.XyFunctionUnit
Force unit: lbf
FORCE_COLOR - Static variable in class nxopen.tooling.SpreadsheetData.ParameterStatus
If the parameter uses user value, normally it shows in UI in a different color.
FORCE_COLOR - Static variable in class nxopen.tooling.SpreadsheetDataParameter.Status
If the parameter uses user value, normally it shows in UI in a different color.
FORCE_LOAD_AND_TURRET_TOOL - Static variable in class nxopen.uf.UFCamPref.CamPref
 
FORCE_MN - Static variable in class nxopen.cae.XyFunctionUnit
Force unit: mN
FORCE_N - Static variable in class nxopen.cae.XyFunctionUnit
Force unit: N
FORCE_POUNDAL - Static variable in class nxopen.cae.XyFunctionUnit
Force unit: Poundal
FORCE_UPDATE - Static variable in class nxopen.tooling.MWPartingManagerBuilder.DataStatus
Data needs force update.
forceCalculation() - Method in interface nxopen.tooling.ToolingManager
Returns the ForceCalculation instance belonging to this part .
ForceCalculationBuilder - Interface in nxopen.tooling
Represents a ForceCalculationBuilder Force Calculation Design is to calculate force of process
To create a new instance of this class, use ForceCalculationCollection.createForceCalculationBuilder()
Default values.
ForceCalculationBuilder.CalculationTypes - Class in nxopen.tooling
The calculation type.
ForceCalculationBuilder.ProcessTypes - Class in nxopen.tooling
The process type.
ForceCalculationCollection - Interface in nxopen.tooling
Creates a ForceCalculationBuilder
To obtain an instance of this class, refer to ToolingManager

Created in NX7.0.0
FORCED_CONSTANT - Static variable in class nxopen.features.FaceBlendBuilder.WidthMethod
Forced Constant
FORCED_DIRECTION - Static variable in class nxopen.features.SweptVolumeBuilder.SweepOrient
Forced Direction
forcedDirection() - Method in interface nxopen.features.SweptVolumeBuilder
Returns the forced direction
License requirements: None.
forcedWelcomeMode() - Method in interface nxopen.preferences.SessionDrafting
Returns the Drafting Welcome mode, for autotests only
License requirements: None.
forceExponent() - Method in interface nxopen.motion.BodyContactAdams
Deprecated.
Deprecated in NX8.0.0. Obtion the exression using BodyContactAdams.forceExponentExpression() to query or edit it.
forceExponent() - Method in interface nxopen.motion.BodyContactLms
Returns the force exponent
License requirements: None.
forceExponent() - Method in interface nxopen.motion.BodyContactRecurdyn
Deprecated.
Deprecated in NX8.0.0. Obtain the expression using BodyContactRecurdyn.forceExponentExpression() to query or edit it.
forceExponent() - Method in interface nxopen.motion.CurveContactAdams
Deprecated.
Deprecated in NX8.0.0. Obtain the expression using CurveContactAdams.forceExponentExpression() to query or edit it.
forceExponent() - Method in interface nxopen.motion.CurveContactRecurdyn
Deprecated.
Deprecated in NX8.0.0. Obtain the expression using CurveContactRecurdyn.forceExponentExpression() to query or edit it.
forceExponent - Variable in class nxopen.uf.UFMotion.ContactParameters
 
forceExponentExpression() - Method in interface nxopen.motion.BodyContactAdams
Returns the force exponent expression
License requirements: None.
forceExponentExpression() - Method in interface nxopen.motion.BodyContactRecurdyn
Returns the force exponent expression
License requirements: None.
forceExponentExpression() - Method in interface nxopen.motion.CurveContactAdams
Returns the force exponent expression
License requirements: None.
forceExponentExpression() - Method in interface nxopen.motion.CurveContactRecurdyn
Returns the force exponent expression
License requirements: None.
forceFunction - Variable in class nxopen.uf.UFMotion.ScalarForceTorque
 
forceModelType() - Method in interface nxopen.motion.BodyContactAdams
Returns the force model type
License requirements: None.
forceModelType() - Method in interface nxopen.motion.BodyContactRecurdyn
Returns the force model type
License requirements: None.
forceModelType - Variable in class nxopen.uf.UFMotion.Motion3DContact
 
forcePreload() - Method in interface nxopen.motion.JointFrictionAdams
Deprecated.
Deprecated in NX8.0.0. Obtain the expression using Motion.JointFrictionAdams#forcePreloadExpression to query or edit it.
forcePreload() - Method in interface nxopen.motion.JointFrictionRecurDyn
Deprecated.
Deprecated in NX8.0.0. Obtain the expression using Motion.JointFrictionRecurDyn#forcePreloadExpression to query or edit it.
forcePreloadExpression() - Method in interface nxopen.motion.JointFrictionAdams
Returns the force preload expression
License requirements: None.
forcePreloadExpression() - Method in interface nxopen.motion.JointFrictionRecurDyn
Returns the force preload expression
License requirements: None.
forceProcess() - Method in interface nxopen.tooling.ForceCalculationBuilder
Returns the process used to calculate force.
forceSaveAll() - Method in interface nxopen.PartCollection
Saves all modified parts in a session.
forceStrength() - Method in interface nxopen.bodydes.OnestepUnformBuilder
Returns the force strength on blank holder.
ForceValueTypes - Class in nxopen.motion
Defines function value type
FORE - Static variable in class nxopen.cae.Result.BeamEnd
Fore end
FORE - Static variable in class nxopen.features.shipdesign.StandardPartItemBuilder.Direction
fore
FORE_AND_AFT - Static variable in class nxopen.cae.responsesimulation.DDAMComponentData.LoadingType
 
FORE_AND_AFT - Static variable in class nxopen.cae.responsesimulation.DDAMExcitation.LoadingType
 
forearmLength() - Method in interface nxopen.features.vehicledesign.ManikinBuilder
Returns the forearm length.
foreground() - Method in interface nxopen.drawings.SectionViewStyle
Returns the status of foreground
License requirements: None.
foreground() - Method in interface nxopen.drawings.ViewStyleSectionBuilder
Returns the foreground toggle on the SECTION tab of the View Style Dialog
License requirements: None.
foreground() - Method in interface nxopen.preferences.SectionViewPreferences
Returns the status of foreground
License requirements: None.
foregroundColor - Variable in class nxopen.uf.UFDisp.DrawingDisplayData
 
FOREIGN - Static variable in class nxopen.Edge.EdgeType
Foreign edge
foreLimitPlane() - Method in interface nxopen.features.shipdesign.ShellExpansionBuilder
Returns the fore limit plane
License requirements: None.
foreOffset() - Method in interface nxopen.cae.BeamSectionOffsetOptions
Returns the fore offsets
License requirements: None.
forePlane() - Method in interface nxopen.features.shipdesign.ExpansionDrawingBuilder
Returns the fore plane
License requirements: None.
foreshorteningSymbol() - Method in interface nxopen.annotations.AngularDimensionBuilder
Returns the foreshortening symbol builder
License requirements: None.
foreshorteningSymbol() - Method in interface nxopen.annotations.ChamferDimensionBuilder
Returns the foreshortening symbol builder
License requirements: None.
foreshorteningSymbol() - Method in interface nxopen.annotations.CurveLengthDimensionBuilder
Returns the foreshortening symbol builder
License requirements: None.
foreshorteningSymbol() - Method in interface nxopen.annotations.DraftingCustomSymbolBuilder
Returns the foreshortening symbol builder
License requirements: None.
foreshorteningSymbol() - Method in interface nxopen.annotations.DraftingDatumFeatureSymbolBuilder
Returns the foreshortening symbol builder
License requirements: None.
foreshorteningSymbol() - Method in interface nxopen.annotations.DraftingDatumTargetBuilder
Returns the foreshortening symbol builder
License requirements: None.
foreshorteningSymbol() - Method in interface nxopen.annotations.DraftingFeatureControlFrameBuilder
Returns the foreshortening symbol builder
License requirements: None.
foreshorteningSymbol() - Method in interface nxopen.annotations.DraftingNoteBuilder
Returns the foreshortening symbol builder
License requirements: None.
foreshorteningSymbol() - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder
Returns the foreshortening symbol builder
License requirements: None.
foreshorteningSymbol() - Method in interface nxopen.annotations.IdSymbolBuilder
Returns the foreshortening symbol builder
License requirements: None.
foreshorteningSymbol() - Method in interface nxopen.annotations.LinearDimensionBuilder
Returns the foreshortening symbol builder
License requirements: None.
foreshorteningSymbol() - Method in interface nxopen.annotations.LineWeldBuilder
Returns the foreshortening symbol builder
License requirements: None.
foreshorteningSymbol() - Method in interface nxopen.annotations.OrdinateDimensionBuilder
Returns the foreshortening symbol builder
License requirements: None.
foreshorteningSymbol() - Method in interface nxopen.annotations.RadialDimensionBuilder
Returns the foreshortening symbol builder
License requirements: None.
foreshorteningSymbol() - Method in interface nxopen.annotations.RapidDimensionBuilder
Returns the foreshortening symbol builder
License requirements: None.
foreshorteningSymbol() - Method in interface nxopen.annotations.ThicknessDimensionBuilder
Returns the foreshortening symbol builder
License requirements: None.
ForeshorteningSymbolBuilder - Interface in nxopen.annotations
Represents a ForeshorteningSymbolBuilder builder
There is no KF creator for this class.
ForeshorteningSymbolBuilder.SymbolsData - Class in nxopen.annotations
This class holds the data returned from ForeshorteningSymbolBuilder.getSymbols()
foreshorteningSymbolMethodType() - Method in interface nxopen.annotations.ForeshorteningSymbolSettingsBuilder
Returns the foreshortening symbol method
License requirements: None.
foreshorteningSymbolSettings() - Method in interface nxopen.annotations.StyleBuilder
Returns the get builder for foreshortening symbol
License requirements: None.
ForeshorteningSymbolSettingsBuilder - Interface in nxopen.annotations
Represents a ForeshorteningSymbolSettingsBuilder builder
Created in NX10.0.0
ForeshorteningSymbolSettingsBuilder.MethodType - Class in nxopen.annotations
Represents foreshortening symbol method type
ForeshorteningSymbolSettingsBuilder.SymbolType - Class in nxopen.annotations
Represents foreshortening symbol type
foreshorteningSymbolType() - Method in interface nxopen.annotations.ForeshorteningSymbolSettingsBuilder
Returns the foreshortening symbol type
License requirements: None.
forgeo() - Method in interface nxopen.UFSession
 
FORK - Static variable in class nxopen.annotations.Tail
Specifies fork tail
form() - Method in interface nxopen.annotations.ChamferDimensionPreferences
Returns the form
License requirements: None.
FORM - Static variable in class nxopen.cam.Tool.Types
Form tool
form() - Method in interface nxopen.features.shipdesign.SteelDistributionBuilder
Returns the form
License requirements: None.
form - Variable in class nxopen.uf.UFDrf.ChamferDimensionData
 
form - Variable in class nxopen.uf.UFModl.SymbThreadData
 
FORM_AND_RESTRIKE - Static variable in class nxopen.die.DieAssistantFlangeProfileType
Form and restrike flange steel.
formabilityStrainType() - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder
Returns the formability strain type
License requirements: None.
formAndPitch() - Method in interface nxopen.cam.HoleBossGeom
Returns the Form and Pitch types
License requirements: None.
format() - Method in interface nxopen.annotations.TableCellStyleBuilder
Deprecated.
Deprecated in NX10.0.0. Use TableCellStyleBuilder.cellFormatType() instead.
format() - Method in interface nxopen.cae.PostAnnotationPreference
Returns the result navigator format
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
format() - Method in interface nxopen.cae.PostIdentifyPreference
Returns the result navigator format
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
format() - Method in interface nxopen.cae.PostLegendPreference
Returns the result navigator format
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
format() - Method in interface nxopen.cae.PostResultNavigatorPreference
Returns the result navigator format
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
format() - Method in interface nxopen.gateway.ImageCaptureBuilder
Returns the format
License requirements: None.
format() - Method in interface nxopen.ModelingViewHighQualityImage
Returns the format to use for the generation of the High Quality Image.
format - Variable in class nxopen.uf.UFDisp.ShadeOptions
 
format - Variable in class nxopen.uf.UFTabnot.CellPrefs
 
FORMAT_COMMA - Static variable in class nxopen.uf.UFTabnot.Format
 
FORMAT_CUSTOM - Static variable in class nxopen.uf.UFTabnot.Format
 
FORMAT_DATE_DM - Static variable in class nxopen.uf.UFTabnot.Format
 
FORMAT_DATE_DMY - Static variable in class nxopen.uf.UFTabnot.Format
 
FORMAT_DATE_DMY_DOT - Static variable in class nxopen.uf.UFTabnot.Format
 
FORMAT_DATE_MDY - Static variable in class nxopen.uf.UFTabnot.Format
 
FORMAT_DATE_MY - Static variable in class nxopen.uf.UFTabnot.Format
 
FORMAT_DATE_Y4MD - Static variable in class nxopen.uf.UFTabnot.Format
 
FORMAT_DATE_YMD - Static variable in class nxopen.uf.UFTabnot.Format
 
FORMAT_DEGREES - Static variable in class nxopen.uf.UFTabnot.Format
 
FORMAT_DEGREES_DEGREE_UNITS - Static variable in class nxopen.uf.UFTabnot.Format
 
FORMAT_DEGREES_RADIAN_UNITS - Static variable in class nxopen.uf.UFTabnot.Format
 
FORMAT_FIXED - Static variable in class nxopen.uf.UFTabnot.Format
 
FORMAT_FLOAT - Static variable in class nxopen.uf.UFTabnot.Format
 
FORMAT_FRACTION_FULL_SIZE - Static variable in class nxopen.uf.UFTabnot.Format
 
FORMAT_FRACTION_HALF_SIZE - Static variable in class nxopen.uf.UFTabnot.Format
 
FORMAT_FRACTION_THREE_QUARTER_SIZE - Static variable in class nxopen.uf.UFTabnot.Format
 
FORMAT_GENERAL - Static variable in class nxopen.uf.UFTabnot.Format
 
FORMAT_HEX - Static variable in class nxopen.uf.UFTabnot.Format
 
FORMAT_HIDDEN - Static variable in class nxopen.uf.UFTabnot.Format
 
FORMAT_LOGIC - Static variable in class nxopen.uf.UFTabnot.Format
 
FORMAT_MONETARY - Static variable in class nxopen.uf.UFTabnot.Format
 
FORMAT_PERCENT - Static variable in class nxopen.uf.UFTabnot.Format
 
FORMAT_QTVR_OBJECT_HIGH - Static variable in class nxopen.uf.UFDisp.ShadeFormat
 
FORMAT_QTVR_OBJECT_LOW - Static variable in class nxopen.uf.UFDisp.ShadeFormat
 
FORMAT_QTVR_PANORAMA - Static variable in class nxopen.uf.UFDisp.ShadeFormat
 
FORMAT_RASTER - Static variable in class nxopen.uf.UFDisp.ShadeFormat
 
FORMAT_TEXT - Static variable in class nxopen.uf.UFTabnot.Format
 
FORMAT_TIME_HM - Static variable in class nxopen.uf.UFTabnot.Format
 
FORMAT_TIME_HMS - Static variable in class nxopen.uf.UFTabnot.Format
 
formatMesh() - Method in interface nxopen.cae.MappedMeshBuilder
Returns the format mesh option
License requirements: None.
formatMesh - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms
 
formatOption() - Method in interface nxopen.cae.NodeElementInfoBuilder
Returns the format option
License requirements: None.
formatRealToStr(double) - Method in interface nxopen.uf.UFSfLegend
Refer to UF_SF_LEGEND_format_real_to_str for documentation.
formatType() - Method in interface nxopen.cae.SimLoadRecipeSource
Returns the format type of a SimLoadRecipeSource .
formatType() - Method in interface nxopen.routing.electrical.ElectricalFormat
Returns the type of ElectricalFormat
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Created in NX5.0.1
formatType - Variable in class nxopen.uf.UFPlist.FieldFormat
 
formblkLines - Variable in class nxopen.uf.UFSmd.AskFormblkLinesData
 
formBlockCurves - Variable in class nxopen.uf.UFSmd.FpPrefs
 
formBlockLines - Variable in class nxopen.uf.UFModl.GflangeOptionsData
 
FormboardFrame - Interface in nxopen.routing
The FormboardFrame is a (not pure) virtual class.
FormboardFrame.ObjectData - Class in nxopen.routing
This class holds the data returned from FormboardFrame.getObject()
FormboardFrameCGM - Interface in nxopen.routing
Represents a Formboard Frame CGM.
FormboardFrameCollection - Interface in nxopen.routing
Represents a collection of FormboardFrame objects.
FormboardFrameCollection.ImportPatternData - Class in nxopen.routing
FormboardFramePattern - Interface in nxopen.routing
Represents a Formboard Frame Pattern.
FormboardFrameRectangle - Interface in nxopen.routing
Represents a Formboard Frame Rectangle.
formboardFrames() - Method in interface nxopen.routing.RouteManager
FormboardFrame collection .
FormboardLayoutBuilder - Interface in nxopen.formboard
Class that performs the "layout" of Formboard geometry.
FormboardLayoutBuilder.BranchAngle - Class in nxopen.formboard
Methods for determining which angles to apply at each branch of the Formboard.
FormboardLayoutBuilder.BranchShape - Class in nxopen.formboard
Shape option for the branches.
FormboardLayoutBuilder.MainRunType - Class in nxopen.formboard
Selection method for the set of segments that define the main run of the formboard geometry.
FormboardManager - Interface in nxopen.formboard
Contains information about flattened harness drawing and drafting data for harness manufacturing drawings (Formboard Drawings).
formboardManager() - Method in interface nxopen.routing.RouteManager
Collection for managing Formboard data.
formboardObject() - Method in interface nxopen.formboard.UpdateDiscrepancy
Returns the object in the 2D formboard referenced by the discrepancy.
formboardSynchronizationLengthTolerance() - Method in interface nxopen.preferences.RoutingElectrical
Returns the default segment length tolerance to use for Formboard Synchronization.
formcustom - Variable in class nxopen.cam.HoleBossGeom.FormData
the User Defined Form
FormData() - Constructor for class nxopen.cam.HoleBossGeom.FormData
 
FORMED - Static variable in class nxopen.features.sheetmetal.BeadBuilder.EndTypeOptions
 
FORMED - Static variable in class nxopen.features.sheetmetal.LouverBuilder.EndTypeOptions
 
FORMED_STATE - Static variable in class nxopen.uf.UFModl.State
 
formedBodyObject - Variable in class nxopen.features.FlatPattern.ObjectDataCsys
Corresponding datum CSYS on the formed body
formedBodyObject - Variable in class nxopen.features.FlatPattern.ObjectDataFace
Corresponding bend face on the formed body
formedBodyObject - Variable in class nxopen.features.FlatPattern.ObjectDataGeneral
Corresponding object on the formed body
formedBodyObject - Variable in class nxopen.features.FlatSolid.ObjectDataCsys
corresponding object on formed body
formEdges() - Method in interface nxopen.cam.FormToolBuilder
Returns the Form Edges Builder
License requirements: None.
FormEdgesBuilder - Interface in nxopen.cam
Represents a FormEdges Builder .
FormEdgesBuilder.Data - Class in nxopen.cam
This class holds the data returned from FormEdgesBuilder.get(int)
formFaces() - Method in interface nxopen.features.sheetmetal.AeroUnformBuilder
Returns the formed faces smart collector object
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
formFeatures(int, Tag[]) - Method in interface nxopen.uf.UFModlSmd
Refer to UF_MODL_form_features for documentation.
FORMING - Static variable in class nxopen.tooling.QuickQuotationBuilder.ObjectTypes
sheet body is forming
FORMING_DIE - Static variable in class nxopen.tooling.FormingInsertBuilder.DesignOptions
design the forming die
FORMING_METHOD_INVALID_OPTION - Static variable in class nxopen.uf.UFSmd.FormingMethodE
 
FORMING_METHOD_NUM_ITEMS - Static variable in class nxopen.uf.UFSmd.FormingMethodE
 
FORMING_ONE_WAY_SURFACE_TO_SURFACE - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ContactType
The draw components contact type is forming one way surface to surface.
FORMING_ONE_WAY_SURFACE_TO_SURFACE_SMOOTH - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ContactType
The draw components contact type is forming one way surface to surface smooth.
FORMING_PUNCH - Static variable in class nxopen.tooling.FormingInsertBuilder.DesignOptions
design the forming punch
FORMING_SURFACE_TO_SURFACE - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ContactType
The draw components contact type is forming surface to surface.
FORMING_SURFACE_TO_SURFACE_SMOOTH - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ContactType
The draw components contact type is forming surface to surface smooth.
FormingAttributesData() - Constructor for class nxopen.die.DrawDiePunchSectionBuilder.FormingAttributesData
 
FormingAttributesData() - Constructor for class nxopen.die.SteelInsertSectionBuilder.FormingAttributesData
 
formingBoundary() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
Returns the forming boundary
License requirements: None.
formingColor() - Method in interface nxopen.tooling.QuickQuotationBuilder
Returns the forming color.
formingInsert() - Method in interface nxopen.tooling.ToolingManager
Returns the FormingInsertCollection instance belonging to this part .
FormingInsertBuilder - Interface in nxopen.tooling
Progressive Die Wizard builder to design forming punch and die insert
To create a new instance of this class, use FormingInsertCollection.createFormingInsertBuilder()
Default values.
FormingInsertBuilder.BlankPositions - Class in nxopen.tooling
Specifies the blank position.
FormingInsertBuilder.BlankTypes - Class in nxopen.tooling
Specifies the blank type.
FormingInsertBuilder.DesignOptions - Class in nxopen.tooling
Specifies the design type.
FormingInsertBuilder.ParentTypes - Class in nxopen.tooling
Specifies the parent part type.
FormingInsertCollection - Interface in nxopen.tooling
Creates a FormingInsertBuilder
To obtain an instance of this class, refer to ToolingManager

Created in NX6.0.0
formingMethod - Variable in class nxopen.uf.UFSmd.GenPrefs
 
formName() - Method in interface nxopen.cam.DrillThreadMillToolBuilder
Returns the Form Name
License requirements: None.
formOption() - Method in interface nxopen.geometricutilities.EndHoleData
Returns the form option
License requirements: None.
FormOutput() - Constructor for class nxopen.uf.UFSmd.FormOutput
 
FormOutput(String, String, String) - Constructor for class nxopen.uf.UFSmd.FormOutput
 
formStandard() - Method in interface nxopen.cam.fbm.ThreadFeatureGeometry
Returns the form standard
License requirements: None.
formTask(nxopen.features.Feature) - Method in interface nxopen.die.DieCollection
Creates/Edits the form task feature builder.
FormTaskBuilder - Interface in nxopen.die
Represents a Form Task feature builder.
FormTaskBuilder.RegionBoundsData - Class in nxopen.die
This class holds the data returned from FormTaskBuilder.getRegionBounds()
FormToolBuilder - Interface in nxopen.cam
Represents a Form tool builder
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createFormToolBuilder

Created in NX5.0.0
formula() - Method in interface nxopen.blockstyler.AngularDimension
Returns the Formula
License requirements: None.
formula() - Method in interface nxopen.blockstyler.ExpressionBlock
Returns the Formula for the expression
License requirements: None.
formula() - Method in interface nxopen.blockstyler.LinearDimension
Returns the Formula
License requirements: None.
formula() - Method in interface nxopen.blockstyler.OnPathDimension
Returns the Formula
License requirements: None.
formula() - Method in interface nxopen.blockstyler.RadiusDimension
Returns the Formula
License requirements: None.
formula() - Method in interface nxopen.cae.ResultProbeBuilder
Returns the formula
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
formula - Variable in class nxopen.mechatronics.SignalAdapterBuilder.ParameterData
Formula Text
formula - Variable in class nxopen.mechatronics.SignalAdapterBuilder.SignalData
Formula Text
formula - Variable in class nxopen.RuleManager.DebugRule
formula of rule
FORMULA - Static variable in class nxopen.validate.RequirementBuilder.DefinitionMethodOptions
 
formula() - Method in interface nxopen.validate.RequirementBuilder
Returns the formula of requirement
License requirements: None.
formula() - Method in interface nxopen.validate.RequirementCheck
Returns the formula of requirement check
License requirements: None.
formulaComment() - Method in interface nxopen.mechatronics.AdapterFormulaBuilder
Returns the formula comment.
formulaName() - Method in interface nxopen.mechatronics.RuntimeFormulaBuilder
Returns the formula name
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
formulaString() - Method in interface nxopen.mechatronics.RuntimeFormulaBuilder
Returns the formula string
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
formulaSuffix - Variable in class nxopen.uf.UFTabnot.CellPrefs
 
formulation() - Method in interface nxopen.cae.responsesimulation.RSEventAttributes
Returns the DDAM formulation type
License requirements: None.
formulaType - Variable in class nxopen.mechatronics.CamProfileBuilder.Element
traversal segments type
FORSURF_GEOM - Static variable in class nxopen.uf.UFBrep.GeomType
 
FORTH - Static variable in class nxopen.weld.WeldFacesetIndex
forth face set
FORWARD - Static variable in class nxopen.cae.AfuDataConvertor.Fft
Forward FFT
FORWARD - Static variable in class nxopen.cam.DmRadBuilder.RadTraverseDirType
Follow Boundary
FORWARD - Static variable in class nxopen.cam.FollowPartMoveBuilder.MoveDirectionTypes
 
FORWARD - Static variable in class nxopen.cam.TurnRoughFinishTestCut.DirectionTypes
Test Direction: Forward
FORWARD - Static variable in class nxopen.features.shipdesign.ShipCoordinatesBuilder.XDirectionType
 
FORWARD - Static variable in class nxopen.Sense
 
FORWARD_OFFSET - Static variable in class nxopen.features.vehicledesign.CloseRangeVisibilityBuilder.EyePointOffsetTypes
Forward offset
FORWARD_PERPENDICULAR - Static variable in class nxopen.annotations.FrameBarElements
 
forwardForce() - Method in interface nxopen.mechatronics.PositionControlBuilder
Returns the max force that speed control can apply.
forwardForce() - Method in interface nxopen.mechatronics.SpeedControlBuilder
Returns the forward force that speed control can apply.
forwardPerpendicular() - Method in interface nxopen.annotations.BaseFrameBarBuilder
Returns the forward perpendicular
License requirements: None.
forwardPerpendicular() - Method in interface nxopen.features.shipdesign.MainDimensionsBuilder
Returns the expression containing the position value of forward Perpendicular along the X axis.
forwardPerpendicularLabelColor() - Method in interface nxopen.annotations.FrameBarPreferences
Returns the label color
License requirements: None.
forwardPerpendicularLabelFont() - Method in interface nxopen.annotations.FrameBarPreferences
Returns the label font
License requirements: None.
forwardPerpendicularLabelItalicized() - Method in interface nxopen.annotations.FrameBarPreferences
Returns the label italicized
License requirements: None.
forwardPerpendicularLabelWidth() - Method in interface nxopen.annotations.FrameBarPreferences
Returns the label width
License requirements: None.
forwardPerpendicularStyle() - Method in interface nxopen.annotations.FrameBarStyleBuilder
Returns the style forward perpendicular
License requirements: None.
forwardPerpendicularTicColor() - Method in interface nxopen.annotations.FrameBarPreferences
Returns the tic color
License requirements: None.
forwardPerpendicularTicDisplay() - Method in interface nxopen.annotations.FrameBarPreferences
Returns the forward perpendicular tic display type
License requirements: None.
forwardPerpendicularTicFont() - Method in interface nxopen.annotations.FrameBarPreferences
Returns the tic font
License requirements: None.
forwardPerpendicularTicLength() - Method in interface nxopen.annotations.FrameBarPreferences
Returns the tic length
License requirements: None.
forwardPerpendicularTicWidth() - Method in interface nxopen.annotations.FrameBarPreferences
Returns the tic width
License requirements: None.
forwardStepTime() - Method in interface nxopen.mechatronics.PreferencesBuilder
Returns the Forward Step Time Expression
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
forwardval - Variable in class nxopen.routing.SplinePathBuilder.ExtensionDataForPointAtIndexData
Forward Extension Length.
found - Variable in class nxopen.annotations.AssociativeText.ObjectAttributeData
the object attribute reference was found.
found - Variable in class nxopen.annotations.AssociativeText.PartAttributeData
the part attribute reference was found
found - Variable in class nxopen.Validation.LookupIntegerData
True integer found False not found in map
found - Variable in class nxopen.Validation.LookupNumberData
True text found False not found in map
found - Variable in class nxopen.Validation.LookupTextData
True text found False not found in map
found - Variable in class nxopen.Validation.LookupTimeData
True time found False not found in map
foundExisting - Variable in class nxopen.routing.ControlPointCollection.CreateControlPointData
Returned ControlPoint is an existing control point.
foundExistingRcp - Variable in class nxopen.uf.UFRoute.CreateRcpAtPortData
 
foundExistingRcp - Variable in class nxopen.uf.UFRoute.CreateRcpByWcsOffData
 
foundExistingRcp - Variable in class nxopen.uf.UFRoute.CreateRcpByWorkPosData
 
foundExistingRcp - Variable in class nxopen.uf.UFRoute.CreateRcpOnRcpData
 
foundParent - Variable in class nxopen.uf.UFModl.AskEntityParentsData
 
foundpath - Variable in class nxopen.routing.ManualRouteBuilder.FindPathsFromMultiplePointsData
 
FOUR - Static variable in class nxopen.annotations.AutomaticCenterlineBuilder.CenterlineThickness
Width Four
FOUR - Static variable in class nxopen.annotations.CenterlineSettingsBuilder.CenterlineThickness
Width Four
FOUR - Static variable in class nxopen.annotations.FractionDenominatorFormat
 
FOUR - Static variable in class nxopen.annotations.IntersectionSymbolBuilder.Thickness
Width Four
FOUR - Static variable in class nxopen.annotations.LineWidth
Width Four
FOUR - Static variable in class nxopen.annotations.OffsetCenterPointBuilder.Thickness
Width Four
FOUR - Static variable in class nxopen.annotations.TargetPointBuilder.Thickness
Width Four
FOUR - Static variable in class nxopen.cae.CfdContactPreventionConstraintBuilder.LocalSubdivisions
 
FOUR - Static variable in class nxopen.cae.CfdLocalResolutionConstraintBuilder.LocalSubdivisions
 
FOUR - Static variable in class nxopen.cae.ModelDisplayBuilder.FreeEdgeWidth
 
FOUR - Static variable in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeWidth
 
FOUR - Static variable in class nxopen.display.GridBuilder.LineWeightType
 
FOUR - Static variable in class nxopen.DisplayableObject.ObjectWidth
 
FOUR - Static variable in class nxopen.drawings.CustomViewSettingsBuilder.Width
Four
FOUR - Static variable in class nxopen.drawings.DrawingCompareSettingsBuilder.WidthType
Width Four
FOUR - Static variable in class nxopen.features.shipdesign.SectionDrawingBuilder.ViewsPerSheetOptions
 
FOUR - Static variable in class nxopen.PlaneTypes.AlternateType
Fourth alternate solution
FOUR - Static variable in class nxopen.preferences.ViewVisualizationVisual.SmoothEdgeWidth
 
FOUR - Static variable in class nxopen.preferences.Width
Width Four
FOUR - Static variable in class nxopen.tooling.BendOperationBuilder.Prebend
four prebends
FOUR - Static variable in class nxopen.tooling.DirectUnfoldBuilder.Bend
four bends
FOUR - Static variable in class nxopen.tooling.LayoutBuilder.BalNumber
Four balance cavities
FOUR - Static variable in class nxopen.tooling.PrebendBuilder.NumberBendsOption
four prebends
FOUR - Static variable in class nxopen.tooling.ScrapDesignBuilder.TrimNumType
Specifies four steps of trimming
FOUR - Static variable in class nxopen.ViewDependentDisplayManager.Width
 
FOUR - Static variable in class nxopen.weld.JointmarkBuilder.ConnectedPanelTypes
 
FOUR_AXIS - Static variable in class nxopen.cam.NcmWedmBuilder.NonTiltLeadInTypes
non-tilt lead in type 4-axis
FOUR_AXIS_AROUND_ROTARY_AXIS - Static variable in class nxopen.cam.ToolAxisVariable.Types
4-Axis Around Rotary Axis
FOUR_AXIS_NORMAL_TO_DRIVE - Static variable in class nxopen.cam.ToolAxisVariable.Types
4-Axis Normal to Drive
FOUR_AXIS_NORMAL_TO_PART - Static variable in class nxopen.cam.ToolAxisVariable.Types
4-Axis Normal to Part
FOUR_AXIS_RELATIVE_TO_DRIVE - Static variable in class nxopen.cam.ToolAxisVariable.Types
4-Axis Relative to Drive
FOUR_AXIS_RELATIVE_TO_PART - Static variable in class nxopen.cam.ToolAxisVariable.Types
4-Axis Relative to Part
FOUR_ONINE_SIX - Static variable in class nxopen.display.DecalBuilder.ImageSize
resize image to 4096x 4096
FOUR_POINT_SLOPE - Static variable in class nxopen.features.SectionSurfaceBuilder.Types
Deprecated.
four point slope
FOUR_POINT_SLOPE - Static variable in class nxopen.features.SectionSurfaceBuilderEx.ConicType
Four Point Slope mode
FOUR_POINTS_ONE_SLOPE - Static variable in class nxopen.features.GeneralConicBuilder.Types
Four points, one slope, no anchor, no rho value
FOUR_SIDED - Static variable in class nxopen.features.RapidSurfaceBuilder.LoopTypes
subdivide four sided loops
FourPointSurfaceBuilder - Interface in nxopen
Represents a four point sheet body builder
To create a new instance of this class, use BodyCollection.createFourPointSurfaceBuilder()

Created in NX6.0.0
FOURTEENTH - Static variable in class nxopen.weld.WeldGroupIdColor
Fourteenth Group Id Color Index
FOURTH - Static variable in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Wad
Fourth wrap around distance line.
FOURTH - Static variable in class nxopen.tooling.AutoDimensionBuilder.TextFontType
 
FOURTH - Static variable in class nxopen.weld.WeldGroupIdColor
Fourth Group Id Color Index
fourthMargin() - Method in interface nxopen.tooling.AutoDimensionBuilder
Returns the fourth margin tag
License requirements: None.
fourthObject() - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder
Returns the fourth selected object.
FOV - Static variable in class nxopen.display.CameraBuilder.LensAngle
Field of View
fpAlgorithm - Variable in class nxopen.uf.UFSmd.FpPrefs
 
fpOrientation - Variable in class nxopen.uf.UFSmd.FpPrefs
 
FpPrefs() - Constructor for class nxopen.uf.UFSmd.FpPrefs
 
FpPrefs(double, double, double, int, int, int, int, boolean, boolean, boolean, boolean, boolean, boolean, boolean, String, int) - Constructor for class nxopen.uf.UFSmd.FpPrefs
 
FRACTION_DENOM1 - Static variable in class nxopen.uf.UFDrf.FractionDenominator
 
FRACTION_DENOM16 - Static variable in class nxopen.uf.UFDrf.FractionDenominator
 
FRACTION_DENOM2 - Static variable in class nxopen.uf.UFDrf.FractionDenominator
 
FRACTION_DENOM32 - Static variable in class nxopen.uf.UFDrf.FractionDenominator
 
FRACTION_DENOM4 - Static variable in class nxopen.uf.UFDrf.FractionDenominator
 
FRACTION_DENOM64 - Static variable in class nxopen.uf.UFDrf.FractionDenominator
 
FRACTION_DENOM8 - Static variable in class nxopen.uf.UFDrf.FractionDenominator
 
FRACTION_FULL_SIZE - Static variable in class nxopen.annotations.TableCellStyleBuilder.CellFormatTypes
Fraction full size
FRACTION_FULL_SIZE - Static variable in class nxopen.annotations.TableCellStyleBuilder.FormatType
Deprecated.
 
FRACTION_HALF_SIZE - Static variable in class nxopen.annotations.TableCellStyleBuilder.CellFormatTypes
Fraction half size
FRACTION_HALF_SIZE - Static variable in class nxopen.annotations.TableCellStyleBuilder.FormatType
Deprecated.
 
FRACTION_THREE_QUARTER_SIZE - Static variable in class nxopen.annotations.TableCellStyleBuilder.CellFormatTypes
Fraction three quarter size
FRACTION_THREE_QUARTER_SIZE - Static variable in class nxopen.annotations.TableCellStyleBuilder.FormatType
Deprecated.
 
FRACTION_VOLUME - Static variable in class nxopen.cae.Result.Quantity
 
FRACTIONAL - Static variable in class nxopen.cae.ModelUpdateOptimOptionsBuilder.SteepestDescMethodChoice
Fractional mode
FRACTIONAL_DEGREES - Static variable in class nxopen.annotations.AngularDimensionFormat
Specifies fractional degrees format
FRACTIONAL_DEGREES - Static variable in class nxopen.preferences.AngleFormat
Fractional degrees format, e.g. 30.55 degrees
FRACTIONAL_DEGREES - Static variable in class nxopen.uf.UFDrf.AngularUnits
 
fractionalDisplay() - Method in interface nxopen.annotations.UnitsFormatPreferences
Returns the fractional display for angular dimension
License requirements: None.
fractionalDisplay() - Method in interface nxopen.annotations.UnitsStyleBuilder
Returns the fractional display for angular dimension
License requirements: None.
FractionDenominatorFormat - Class in nxopen.annotations
Specifies the fraction denominator format
FRAME - Static variable in class nxopen.features.shipdesign.MaterialEstimationBuilder.SelectionMethods
Selection by Frame.
FRAME - Static variable in class nxopen.features.shipdesign.TransitionBuilder.TransitionTypes
 
FRAME - Static variable in class nxopen.features.shipdesign.WeightAndCGBuilder.SelectionMethods
Selection by Frame.
FRAME - Static variable in class nxopen.RuleManager.RuleType
 
FRAME - Static variable in class nxopen.uf.UFKf.Type
 
frame - Variable in class nxopen.uf.UFMotion.VectorForceTorque
 
FRAME_LOWER_LEFT - Static variable in class nxopen.uf.UFDrf.FrameCorner
 
FRAME_LOWER_RIGHT - Static variable in class nxopen.uf.UFDrf.FrameCorner
 
FRAME_NONE - Static variable in class nxopen.uf.UFDrf.FrameCorner
 
FRAME_UPPER_LEFT - Static variable in class nxopen.uf.UFDrf.FrameCorner
 
FRAME_UPPER_RIGHT - Static variable in class nxopen.uf.UFDrf.FrameCorner
 
FrameBar - Interface in nxopen.annotations
Represents a frame bar class
To create or edit an instance of this class, use FrameBarBuilder

Created in NX8.0.0
FrameBarBuilder - Interface in nxopen.annotations
Represents a FrameBarBuilder .
FrameBarCollection - Interface in nxopen.annotations
Represents a collection of FrameBar objects
To obtain an instance of this class, refer to AnnotationManager

Created in NX8.0.0
FrameBarElements - Class in nxopen.annotations
Specifies the frame bar elements
FrameBarElementStyleBuilder - Interface in nxopen.annotations
framebarGeneral() - Method in interface nxopen.drafting.PreferencesBuilder
Returns the framebar general builder
License requirements: None.
framebarHorizontal() - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
Returns the horizontal framebar toggle on the GENERAL tab of the View Style Dialog
License requirements: None.
framebarHorizontal() - Method in interface nxopen.preferences.GeneralViewPreferences
Returns the status of horizontal framebar.
FrameBarOut - Interface in nxopen.features.shipdesign
Represents a FrameBarOut
To create or edit an instance of this class, use FrameBarOutBuilder

Created in NX5.0.0
FrameBarOutBuilder - Interface in nxopen.features.shipdesign
Represents a FrameBarOut builder.
frameBarPrecision() - Method in interface nxopen.preferences.PartDrafting
Returns the frame bar precision.
FrameBarPreferences - Interface in nxopen.annotations
Represents frame bar preferences.
frameBars() - Method in interface nxopen.annotations.AnnotationManager
Frame bar collection .
frameBarStyle() - Method in interface nxopen.annotations.StyleBuilder
Returns the frame bar builder
License requirements: None.
FrameBarStyleBuilder - Interface in nxopen.annotations
Represents a FrameBarStyleBuilder .
frameBarTicDirection() - Method in interface nxopen.preferences.PartDrafting
Returns the frame bar tic direction.
framebarVertical() - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
Returns the vertical framebar toggle on the GENERAL tab of the View Style Dialog
License requirements: None.
framebarVertical() - Method in interface nxopen.preferences.GeneralViewPreferences
Returns the status of vertical framebar.
frameList() - Method in interface nxopen.mechatronics.PathConstraintJointBuilder
Returns the list containing the defined frames.
frameName() - Method in interface nxopen.features.shipdesign.BulkHeadListItemBuilder
Returns the reference frame name.
frameOffset() - Method in interface nxopen.features.shipdesign.BulkHeadListItemBuilder
Returns the expression containing bulkhead frame offset value.
frameOnlyToggle() - Method in interface nxopen.geometricutilities.PatternDefinition
Returns the frameOnlyToggle, a logical flag to indicate if the we need only instances on the boundary.
frameOnPath() - Method in interface nxopen.features.TextBuilder
Returns the frame on path
License requirements: None.
FrameOnPathBuilder - Interface in nxopen.geometricutilities
Frame on path builder .
FrameOnPathBuilder.AnchorLocationType - Class in nxopen.geometricutilities
Anchor location types
framePlane() - Method in interface nxopen.features.shipdesign.InsertSheetBodyBuilder
Returns the frame plane
License requirements: None.
framePlane() - Method in interface nxopen.features.shipdesign.ReferenceLineBuilder
Returns the grid fame plane to intersect with the face to produce the reference line.
frameSheet() - Method in interface nxopen.features.shipdesign.InsertSheetBodyBuilder
Returns the frame sheet
License requirements: None.
frameSpacing() - Method in interface nxopen.features.shipdesign.TransFrameListItemBuilder
Returns the expression containing the frame spacing value.
framesPerPulse - Variable in class nxopen.cae.Post.AnimationStreamline
more than 2.0
framesPerSecond() - Method in interface nxopen.MovieSettingsBuilder
Returns the frames per second for the movie.
frameStyle() - Method in interface nxopen.annotations.FeatureControlFrameBuilder
Returns the frame style
License requirements: None.
frameStyleType() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
Returns the frame style enum
License requirements: None.
frameType() - Method in interface nxopen.motion.PackagingInterferenceBuilder
Returns the PackagingInterference frame type defined at PackagingInterferenceBuilder.Frame
License requirements: mechanisms ("MECHANISMS")

Created in NX4.0.0
frameType() - Method in interface nxopen.motion.PackagingTraceBuilder
Returns the PackagingTrace reference frame type defined at PackagingTraceBuilder.Frame
License requirements: mechanisms ("MECHANISMS")

Created in NX4.0.0
frdim(Tag, Tag, int, int, double, double, String, int, String[], double[]) - Method in interface nxopen.uf.UFDrf
Refer to UF_DRF_frdim for documentation.
FrdimData() - Constructor for class nxopen.uf.UFDrf.FrdimData
 
frecAtTimeStamp() - Method in interface nxopen.features.CompositeCurveBuilder
Returns the frec at time stamp
License requirements: None.
frecAtTimeStamp() - Method in interface nxopen.features.ExtractFaceBuilder
Returns the option specifying if the results from this builder should be associated
License requirements: None.
frecAtTimeStamp() - Method in interface nxopen.features.MirrorBodyBuilder
Returns the frec at time stamp
License requirements: None.
frecAtTimeStamp() - Method in interface nxopen.features.WavePointBuilder
Returns the frec at time stamp
License requirements: None.
frecs - Variable in class nxopen.uf.UFModl.UdfsDefData
 
frecs - Variable in class nxopen.weld.WeldPointBuilder.FaceSetData
the face set wave linked frecs
FREE - Static variable in class nxopen.assemblies.DegreesOfFreedomStatus
The point or direction is under defined.
FREE - Static variable in class nxopen.cae.DependentMeshBuilder.MeshType
Free mesh
FREE - Static variable in class nxopen.cae.optimization.TBSCheckDOF.CheckDofOption
Displacement is allowed
FREE - Static variable in class nxopen.facet.BestFitAlignBuilder.ConstraintOptions
No constraint
FREE - Static variable in class nxopen.features.MatchEdgeBuilder.EdgeConstraintType
Free
FREE - Static variable in class nxopen.features.StudioXformBuilderEx.PoleEditType
Edited without maintaining constraint
FREE - Static variable in class nxopen.geometricutilities.Continuity.ContinuityTypes
Free continuity
free() - Method in interface nxopen.uf.UFCutLevels
Refer to UF_CUT_LEVELS_free for documentation.
free(UFVariant) - Method in interface nxopen.uf.UFEval
Refer to UF_EVAL_free for documentation.
free2DOption() - Method in interface nxopen.features.FreeTransformerBuilder
Returns the option to turn on or off the Free 2D plane used in the transformation or morphing calculations
License requirements: None.
free2DPlane() - Method in interface nxopen.features.FreeTransformerBuilder
Returns the Free 2D plane to be used in the transformation or morphing calculations
License requirements: None.
FREE_COINCIDENT - Static variable in class nxopen.cae.MMCCreateBuilder.MeshMatingType
free coincident
FREE_FACEES - Static variable in class nxopen.cae.Post.Target
 
FREE_NORMAL - Static variable in class nxopen.assemblies.DegreesOfFreedomStatus
The direction represents a normal to two translational degrees of freedom.
FREE_SOLID - Static variable in class nxopen.cae.ElementTypeBuilder.ElementType
Free mesh solid
FREE_STATE - Static variable in class nxopen.uf.UFGdt.ModifierTypes
 
freeAngleExpression() - Method in interface nxopen.motion.SpringBuilder
Returns the free angle expression
License requirements: None.
freeAvailableProperties() - Method in interface nxopen.features.shipdesign.FilterBuilder
Frees the memory allocated by Features.ShipDesign.FilterBuilder#getAvailableProperties
License requirements: None.
FreeBodyResultsBuilder - Interface in nxopen.cae
Represents a FreeBodyResultsBuilder
To obtain an instance of this class use Session.resultManager() .
FreeBodyResultsBuilder.LocationMethod - Class in nxopen.cae
Location definition method
FreeBodyResultsBuilder.OutputUnits - Class in nxopen.cae
User Specified output units
FreeBodyResultsBuilder.VectorDisplay - Class in nxopen.cae
Vector display option
freeCompareData3(UFModl.ComparePartMapData3) - Method in interface nxopen.uf.UFModl
Refer to UF_MODL_free_compare_data_3 for documentation.
freeCompData(UFVariant) - Method in interface nxopen.uf.UFDrf
Refer to UF_DRF_free_comp_data for documentation.
FREED - Static variable in class nxopen.tooling.MWPartingManagerBuilder.DataStatus
Data already freed.
freeDimensionPreferences1(UFDrf.DimensionPreferences1) - Method in interface nxopen.uf.UFDrf
Refer to UF_DRF_free_dimension_preferences1 for documentation.
freeEdgeDisplayStyle() - Method in interface nxopen.cae.modelcheck.ElementEdgeCheckBuilder
Returns the display style for free edges detected
License requirements: None.
freeedges - Variable in class nxopen.cae.modelcheck.ElementEdgeCheckBuilder.ExecuteCheckData
free element edges
freeFaceIndicator() - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
Returns the free face indicator.
freeFormConstructionResult() - Method in interface nxopen.preferences.SessionModeling
Returns the free form construction result.
freeformCurveCollection() - Method in interface nxopen.features.FeatureCollection
Returns the FreeformCurveCollection instance belonging to this part .
FreeformCurveCollection - Interface in nxopen.features
Collection of freeform curve based features.
freeformSurfaceCollection() - Method in interface nxopen.features.FeatureCollection
Returns the FreeformSurfaceCollection instance belonging to this part .
FreeformSurfaceCollection - Interface in nxopen.features
Collection of freeform surface based features.
Freehand - Interface in nxopen.markup
Represents a nxopen.Markup.Freehand
To create a new instance of this class, use nxopen.Markup.MarkupFileObjectCollection#createFreehand

Created in NX10.0.0
NX_REMOVE_FROM_JAVA_API
freeLength() - Method in interface nxopen.motion.SpringBuilder
Deprecated.
Deprecated in NX8.0.0. Obtain the expression using Motion.SpringBuilder#freeLengthExpression or Motion.SpringBuilder#freeLengthExpression to query or edit it.
freeLengthExpression() - Method in interface nxopen.motion.SpringBuilder
Returns the free length expression
License requirements: None.
freeLinkedFeatureInfo(UFWave.LinkedFeatureInfo) - Method in interface nxopen.uf.UFWave
Refer to UF_WAVE_free_linked_feature_info for documentation.
freePrev16Aligns(int, UFAssem.Prev16Align) - Method in interface nxopen.uf.UFAssem
Refer to UF_ASSEM_free_prev16_aligns for documentation.
freeProductAttributeData2(UFPd.ProductAttribute2) - Method in interface nxopen.uf.UFPd
Refer to UF_PD_free_product_attribute_data_2 for documentation.
freeState() - Method in interface nxopen.annotations.DatumReferenceBuilder
Returns the datum reference free state
License requirements: None.
freeState() - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
Returns the free state toggle
License requirements: None.
freeStateType() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
Returns the free state enum
License requirements: None.
FreeTransformer - Interface in nxopen.features
Represents a free transformer feature
To create or edit an instance of this class, use FreeTransformerBuilder

Created in NX10.0.0
FreeTransformerBuilder - Interface in nxopen.features
Represents a FreeTransformer builder
To create a new instance of this class, use FeatureCollection.createFreeTransformerBuilder(Feature)
Default values.
freeValidationOptions(UFClone.ValidationOpts) - Method in interface nxopen.uf.UFClone
Refer to UF_CLONE_free_validation_options for documentation.
freeze(int, Tag[]) - Method in interface nxopen.uf.UFWave
Refer to UF_WAVE_freeze for documentation.
FreezeGeometryBuilder - Interface in nxopen.cae
Builder for creating Freeze Geometry
To create a new instance of this class, use GeometryRecipeCollection.createFreezeGeometryBuilder(nxopen.cae.FreezeGeometryRecipe)

Created in NX10.0.0
FreezeGeometryRecipe - Interface in nxopen.cae
Represents FreezeGeometryRecipe
To create or edit an instance of this class, use FreezeGeometryBuilder

Created in NX10.0.0
freezePersistently(int, Tag[]) - Method in interface nxopen.uf.UFWave
Refer to UF_WAVE_freeze_persistently for documentation.
FRENET - Static variable in class nxopen.DatumConstraint.Type
 
FRENET - Static variable in class nxopen.features.DatumAxisBuilder.ConstraintType
Frenet constraint
FRENET - Static variable in class nxopen.features.DatumPlaneBuilder.ConstraintType
Frenet constraint
FRENET - Static variable in class nxopen.PlaneTypes.MethodType
Frenet method
frenetSubtype() - Method in interface nxopen.IPlane
Returns the subtype of on curve type of plane fron NX6 onwards.
FREQ_MAC - Static variable in class nxopen.cae.CorrelModePairingBuilder.Auto
by frequency AND mac
FREQRESPONSE - Static variable in class nxopen.cae.Result.SolutionType
Frequency Response
frequencies() - Method in interface nxopen.cae.ModelUpdateOverallWeightsBuilder
Returns the overall weights of frequency targets
License requirements: None.
FREQUENCIES - Static variable in class nxopen.cae.ModelUpdateSolution.TargetType
Export all the frequency targets to the csv file
FREQUENCY - Static variable in class nxopen.cae.BaseIteration.IterationValueType
Value represents a Frequency
FREQUENCY - Static variable in class nxopen.cae.CorrelModePairingBuilder.Auto
by frequency
FREQUENCY - Static variable in class nxopen.cae.optimization.Response
 
FREQUENCY - Static variable in class nxopen.cae.responsesimulation.RSEvent.Type
 
FREQUENCY - Static variable in class nxopen.cae.Result.LoadcaseValueType
Value type - Frequency
FREQUENCY - Static variable in class nxopen.cae.ResultProbeBuilder.IterationType
 
FREQUENCY - Static variable in class nxopen.cae.SimLoadSet.Type
Frequency Excitation Load Set.
FREQUENCY - Static variable in class nxopen.cae.XyFunctionMeasure
Frequency unit
frequency(double) - Method in interface nxopen.EngineeringFunction
Calculate the frequency from period.
frequency() - Method in interface nxopen.motion.DriverOperation
Deprecated.
Deprecated in NX8.0.0. Obtain the expression using DriverOperation.frequencyExpression() to query or edit it.
frequency() - Method in interface nxopen.motion.NormalModeProperty
Returns the natural frequency of the normal mode
License requirements: mechanisms ("MECHANISMS")
.
frequency - Variable in class nxopen.uf.UFMotion.JointMotionInput
 
FREQUENCY_HZ - Static variable in class nxopen.cae.XyFunctionUnit
Frequency unit: Hz
FREQUENCY_RESPONSE - Static variable in class nxopen.cae.BaseIteration.IterationType
Frequency Response Analysis Iteration
FREQUENCY_RESPONSE_ACCELERATION_X - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
Acceleration in X-direction for frequency response
FREQUENCY_RESPONSE_ACCELERATION_Y - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
Acceleration in Y-direction for frequency response
FREQUENCY_RESPONSE_ACCELERATION_Z - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
Acceleration in Z-direction for frequency response
FREQUENCY_RESPONSE_COMPLIANCE - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
Dynamic compliance for frequency response
FREQUENCY_RESPONSE_DB_PRESSURE - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
Sound pressure level (dB)
FREQUENCY_RESPONSE_DBA_PRESSURE - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
Sound pressure level (dBA)
FREQUENCY_RESPONSE_DISPLACEMENT_ABSOLUTE - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
Absolute amplitude for frequency response
FREQUENCY_RESPONSE_DISPLACEMENT_XABSOLUTE - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
Amplitude in X-direction for frequency response
FREQUENCY_RESPONSE_DISPLACEMENT_YABSOLUTE - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
Amplitude in Y-direction for frequency respons
FREQUENCY_RESPONSE_DISPLACEMENT_ZABSOLUTE - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
Amplitude in Z-direction for frequency respons
FREQUENCY_RESPONSE_FUNCTION - Static variable in class nxopen.cae.XyFunctionDataType
Function is Frequency Response Function
FREQUENCY_RESPONSE_FUNCTION - Static variable in class nxopen.cae.XyFunctionGeneralType
Function is Frequency Response Function
FREQUENCY_RESPONSE_FUNCTION - Static variable in class nxopen.cae.XyFunctionResponseType
Function is Frequency Response Function
FREQUENCY_RESPONSE_NVH_SHELL - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
Surface normal velocity equivalent.
FREQUENCY_RESPONSE_NVH_SOLID - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
Surface normal velocity equivalent.
FREQUENCY_RESPONSE_PHASE_XABSOLUTE - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
Phase in X-direction for frequency response
FREQUENCY_RESPONSE_PHASE_YABSOLUTE - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
Phase in Y-direction for frequency response
FREQUENCY_RESPONSE_PHASE_ZABSOLUTE - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
Phase in Z-direction for frequency response
FREQUENCY_RESPONSE_PRESSURE - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
Instantaneous sound pressure
FREQUENCY_RESPONSE_RMS_PRESSURE - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
Effective sound pressure
FREQUENCY_RESPONSE_VELOCITY_XABSOLUTE - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
Velocity in X-direction for frequecy response
FREQUENCY_RESPONSE_VELOCITY_YABSOLUTE - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
Velocity in Y-direction for frequecy response
FREQUENCY_RESPONSE_VELOCITY_ZABSOLUTE - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
Velocity in Z-direction for frequecy response
FREQUENCY_SPECTRA - Static variable in class nxopen.cae.SimLoadRecipeTypes.DataTypes
Frequency Spectra
FrequencyDefinition - Interface in nxopen.cae.responsesimulation
Represents the frequency setting to perform FRF evaluation .
FrequencyDefinition.Definition - Class in nxopen.cae.responsesimulation
Specifies the method to define frequency
FrequencyDefinition.InterpolationMethod - Class in nxopen.cae.responsesimulation
Specifies the method for interpolation
frequencyExpression() - Method in interface nxopen.motion.DriverOperation
Returns the frequency expression
License requirements: None.
frequencyTolerance() - Method in interface nxopen.cae.CorrelModePairingBuilder
Returns the frequency-pairing tolerance
License requirements: None.
frfDampingSource() - Method in interface nxopen.cae.CorrelSolutionBuilder
Returns the option controlling which damping to consider when synthesizing FRF data from analysis results
License requirements: None.
FrfEvaluationSetting - Interface in nxopen.cae.responsesimulation
Represents the parameters setting for FRF results evaluation
To create or edit an instance of this class, use FrfEvaluationSettingBuilder

Created in NX5.0.0
FrfEvaluationSettingBuilder - Interface in nxopen.cae.responsesimulation
This is a manager to the FrfEvaluationSetting class.
frfUnit - Variable in class nxopen.cae.FunctionBuilder.UnitsData
 
friction() - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
Returns the friction.
frictionArm() - Method in interface nxopen.motion.JointFrictionAdams
Deprecated.
Deprecated in NX8.0.0. Obtain the expression using Motion.JointFrictionAdams#frictionArmExpression to query or edit it.
frictionArm() - Method in interface nxopen.motion.JointFrictionLms
Returns the friction arm
License requirements: None.
frictionArm() - Method in interface nxopen.motion.JointFrictionRecurDyn
Deprecated.
Deprecated in NX8.0.0. Obtain the expression using Motion.JointFrictionRecurDyn#frictionArmExpression to query or edit it.
frictionArmExpression() - Method in interface nxopen.motion.JointFrictionAdams
Returns the friction arm expression
License requirements: None.
frictionArmExpression() - Method in interface nxopen.motion.JointFrictionRecurDyn
Returns the friction arm expression
License requirements: None.
frictionForce(double, double) - Method in interface nxopen.EngineeringFunction
Calculate the friction force.
frictionOption - Variable in class nxopen.uf.UFMotion.Motion3DContact
 
frictionVelocity() - Method in interface nxopen.motion.BodyContactAdams
Deprecated.
Deprecated in NX8.0.0. Obtion the exression using BodyContactAdams.frictionVelocityExpression() to query or edit it.
frictionVelocity() - Method in interface nxopen.motion.BodyContactLms
Returns the friction velocity
License requirements: None.
frictionVelocity() - Method in interface nxopen.motion.BodyContactRecurdyn
Deprecated.
Deprecated in NX8.0.0. Obtain the expression using BodyContactRecurdyn.frictionVelocityExpression() to query or edit it.
frictionVelocityExpression() - Method in interface nxopen.motion.BodyContactAdams
Returns the friction velocity expression
License requirements: None.
frictionVelocityExpression() - Method in interface nxopen.motion.BodyContactRecurdyn
Returns the friction velocity expression
License requirements: None.
friendlyName() - Method in interface nxopen.userdefinedobjects.UserDefinedClass
Returns the friendly name of the UserDefinedClass .
from() - Method in interface nxopen.cam.BladeCutStart
Returns the location of the cut start
License requirements: None.
from() - Method in interface nxopen.features.sheetmetal.NormalCutoutBuilder
Returns the face or datum plane from which the cutout begins.
FROM - Static variable in class nxopen.routing.RunItem.Type
A "From" item type.
FROM_APOINT - Static variable in class nxopen.cam.TurnEngageRetractBuilder.Types
From a Point
FROM_BASE - Static variable in class nxopen.die.HandlingCoreBuilder.Types
Location is an offset from the base.
FROM_BODY - Static variable in class nxopen.preferences.GeneralWireframeColorSourceOption
From Body
FROM_BOTH_ENDS - Static variable in class nxopen.features.sheetmetal.FlangeBuilder.WidthTypeOptions
The flange starts and ends at specified distances from the ends of the edge.
FROM_BOTH_ENDS - Static variable in class nxopen.features.sheetmetal.SheetmetalManagerFlangeWidthOption
from both ends
FROM_BOTH_ENDS_TYPE - Static variable in class nxopen.uf.UFNxsm.FlangeWidthOption
 
FROM_BOTTOM - Static variable in class nxopen.annotations.LeaderOrientation
 
FROM_CAP - Static variable in class nxopen.features.RibBuilder.RibDraftOptions
Draft from cap
FROM_CHARACTERISTIC - Static variable in class nxopen.routing.ModelTerminalsBuilder.CutBackLocationOption
FromCharacteristic
FROM_CHARACTERISTIC - Static variable in class nxopen.routing.ModelTerminalsBuilder.ExtensionValueOption
FromCharacteristic
FROM_COORDINATE_SYSTEMS - Static variable in class nxopen.mechatronics.PathConstraintJointBuilder.PathTypes
from coordinate systems
FROM_CURVE - Static variable in class nxopen.cam.ToolPathTiltTilting.ToolAxisTypes
Tool axis mode: from curve
FROM_CURVES - Static variable in class nxopen.annotations.Centerline2dBuilder.Types
centerline from curves
FROM_CURVES - Static variable in class nxopen.mechatronics.PathConstraintJointBuilder.PathTypes
from curves
FROM_DATUM - Static variable in class nxopen.cam.InspectionMoveBuilder.DepthMethodTypes
Distance from datum
FROM_DATUM_PLANE - Static variable in class nxopen.display.DatumPlaneGridBuilder.GridOrientationType
Grid display matches datum plane display
FROM_DIRECTORY - Static variable in class nxopen.LoadOptions.LoadMethod
use same directory as the parent assembly
FROM_EDGE_END - Static variable in class nxopen.features.sheetmetal.FlangeBuilder.WidthTypeOptions
The flange starts at a specified distance from an end of the edge.
FROM_EDGES - Static variable in class nxopen.features.DraftBodyBuilder.MatchingType
Match type from edges
FROM_EEF - Static variable in class nxopen.cae.responsesimulation.InitialConditions.EntryMethod
 
FROM_END - Static variable in class nxopen.die.DirectionOption
Profile direction is aligned with the first curve from the end to start.
FROM_END - Static variable in class nxopen.features.sheetmetal.SheetmetalManagerFlangeWidthOption
from end
FROM_END - Static variable in class nxopen.features.shipdesign.OrientationPointMethodsBuilder.PointMethodTypes
The boundary is defined by a distance from the end of the landing curve.
FROM_END_FACE - Static variable in class nxopen.weld.WeldGrooveBuilder.Taper
From End Face
FROM_END_FACE - Static variable in class nxopen.weld.WeldTaperMethod
Taper will be measured from groove end caps
FROM_END_TYPE - Static variable in class nxopen.uf.UFNxsm.FlangeWidthOption
 
FROM_EXTERIOR - Static variable in class nxopen.cae.FluidDomainBuilder.IntExtType
Wrap from the exterior.
FROM_FACE - Static variable in class nxopen.annotations.SymmetricalCenterlineBuilder.Types
Centerline from face
FROM_FACE - Static variable in class nxopen.preferences.GeneralWireframeColorSourceOption
From Face
FROM_FEATURE_ACTUAL - Static variable in class nxopen.cam.InspectionMoveBuilder.DepthMethodTypes
Distance from feature actual
FROM_FEATURE_NOMINAL - Static variable in class nxopen.cam.InspectionMoveBuilder.DepthMethodTypes
Distance from feature nominal
FROM_GEOMETRY - Static variable in class nxopen.cam.InferredDouble.Lock
Lock: From Geometry
FROM_GUIDE_CURVE - Static variable in class nxopen.features.AeroFlangeBuilder.LimitObjectTypes
 
FROM_GUIDE_CURVE - Static variable in class nxopen.features.AeroRibBuilder.LimitObjectTypes
 
FROM_IMAGE - Static variable in class nxopen.display.ImageBaseBuilder.TransparencyColorFrom
Transparency Color from image
FROM_ITEMS - Static variable in class nxopen.routing.IntegrateRunsBuilder.Button
Set as FromItem for selected node in tree list
FROM_LEFT - Static variable in class nxopen.annotations.LeaderOrientation
 
FROM_MESH_POLYGON_BODIES - Static variable in class nxopen.DisplayManager.ShowHideType
Show or hide from mesh polygon bodies
FROM_MODEL - Static variable in class nxopen.cam.fbm.ThreadFeatureGeometry.ThreadDataSource
From Model
FROM_MODEL - Static variable in class nxopen.cam.HoleBossGeom.FormPitchTypes
Form and Pitch: From Model
FROM_MODEL_VIEW - Static variable in class nxopen.preferences.GdtOption
inherit display instances of geometric tolerance features that exist in a particular modeling view (e.g.
FROM_MODEL_VIEW - Static variable in class nxopen.preferences.PmiOption
Inherit PMI from the parent model view.
FROM_OFFSET_FILE - Static variable in class nxopen.features.vehicledesign.TireEnvelopeBuilder.EnvelopeOffsetMethod
From the offset file.
FROM_PARENT_RESULT - Static variable in class nxopen.cae.DurabilityDataControlBuilder.TimeExtentsEnum
From Parent Result
FROM_PARTS - Static variable in class nxopen.routing.PathStockBuilder.AssignMethod
Find stocks from the part table of parts selected by the user.
FROM_POINT - Static variable in class nxopen.cam.ToolPathTiltTilting.ToolAxisTypes
Tool axis mode: from point
FROM_POINTS - Static variable in class nxopen.weld.WeldPointMethod
create fix/single/none points using existing points
FROM_RESULT - Static variable in class nxopen.cae.ResultsManipulationBuilder.UnitsSystem
 
FROM_RIGHT - Static variable in class nxopen.annotations.LeaderOrientation
 
FROM_SECOND_AXIS - Static variable in class nxopen.cae.CorrelAlignmentBuilder.ScalingChoice
Computed from the lenght of the second axis
FROM_SECTION - Static variable in class nxopen.features.RibBuilder.RibCapGeometryOptions
Cap from section
FROM_SELECTED - Static variable in class nxopen.features.AeroFlangeBuilder.LimitObjectTypes
 
FROM_SELECTED - Static variable in class nxopen.features.AeroRibBuilder.LimitObjectTypes
 
FROM_SELECTED - Static variable in class nxopen.features.RibBuilder.RibCapGeometryOptions
Cap from selected
FROM_SIDE_FACE - Static variable in class nxopen.weld.WeldTaperMethod
Taper will be measured from groove side face
FROM_SPINDLE_LINES - Static variable in class nxopen.features.vehicledesign.TireEnvelopeBuilder.MotionMethod
From lines that define the locations of the suspension components.
FROM_START - Static variable in class nxopen.die.DirectionOption
Profile direction is aligned with the first curve from the start to end.
FROM_START - Static variable in class nxopen.features.shipdesign.OrientationPointMethodsBuilder.PointMethodTypes
The boundary is defined by a distance from the start of the landing curve.
FROM_START_OBJECT - Static variable in class nxopen.routing.PathStockBuilder.AssignMethod
Finds a stock based off of the default stock and the object selected by the user.
FROM_TABLE - Static variable in class nxopen.cam.fbm.ThreadFeatureGeometry.ThreadDataSource
From Table
FROM_TABLE - Static variable in class nxopen.cam.HoleBossGeom.FormPitchTypes
Form and Pitch: From Table
FROM_TEMPLATE - Static variable in class nxopen.pdm.PartOperationCreateBuilder.OperationSubType
Create New Part from template
FROM_TO - Static variable in class nxopen.features.sheetmetal.NormalCutoutBuilder.DepthTypeOptions
From To
FROM_TOOL - Static variable in class nxopen.cam.HoleBossGeom.FormPitchTypes
Form and Pitch: From Tool
FROM_TOOL - Static variable in class nxopen.cam.RoughTurningBuilder.LevelDepthModeTypes
Level depth mode: From Tool
FROM_TOP - Static variable in class nxopen.annotations.LeaderOrientation
 
FROM_TOP_FACE - Static variable in class nxopen.weld.WeldGrooveBuilder.Taper
From Top Face
FROM_WORK_MODEL - Static variable in class nxopen.cae.CorrelSolutionBuilder.EnumDampingFrftype
from work model
fromCachedAnalytics - Variable in class nxopen.uf.UFFacet.AskSurfaceDataForFaceData
 
fromCsys() - Method in interface nxopen.features.sheetmetal.SolidPunchBuilder
Returns the csys that defines the start of transformation of the tool body.
fromCsys() - Method in interface nxopen.geometricutilities.ModlMotion
Returns the "from csys" of ModlMotion.Options.CSYS_TO_CSYS motion option .
fromCSYS() - Method in interface nxopen.geometricutilities.PatternOrientation
Returns the fromCSYS, a CSYS for certain pattern type orientation need.
fromDateItem() - Method in interface nxopen.DateBuilder
Returns a DateItemBuilder object used for simple date and time storage.
fromexcitation - Variable in class nxopen.cae.responsesimulation.CSDExcitationBuilder.CSDFunction
 
fromFace - Variable in class nxopen.uf.UFModl.DfoConstraint
 
fromItems - Variable in class nxopen.uf.UFRouteRun.AskFromItemsData
 
fromItemsList() - Method in interface nxopen.routing.DefineRunBuilder
Returns the FROM items list of the run.
fromJtFile - Variable in class nxopen.uf.UFPart.AskJtInfoOfPartData
 
fromLeadingEdge() - Method in interface nxopen.cam.MillCutParameters
Returns the from leading edge
License requirements: None.
fromLocation() - Method in interface nxopen.geometricutilities.BetweenLocationsData
Returns the from location
License requirements: None.
fromLocationCsys2d() - Method in interface nxopen.geometricutilities.GeneralPattern
Returns the from location 2d csys
License requirements: None.
fromLocationCsys3d() - Method in interface nxopen.geometricutilities.GeneralPattern
Returns the from location 3d csys
License requirements: None.
fromLocationPoint() - Method in interface nxopen.geometricutilities.GeneralPattern
Returns the from location point
License requirements: None.
fromLocationType() - Method in interface nxopen.geometricutilities.GeneralPattern
Returns the from location type
License requirements: None.
fromPoint() - Method in interface nxopen.cam.TurnAvoidanceFromBuilder
Returns the from point
License requirements: None.
fromPoint() - Method in interface nxopen.cam.WedmBasedGeomBuilder
Returns the From Point
License requirements: cam_base ("CAM BASE")
.
fromPoint() - Method in interface nxopen.features.MoveFaceBuilder
Returns the from point in point to point option in move face, don't use it until nx502
License requirements: None.
fromPoint() - Method in interface nxopen.formboard.OrientBranchBuilder
Deprecated.
Deprecated in NX8.5.0. This OrientBranchBuilder.BranchAngleMethod.TWO_POINTS is no longer supported.
fromPoint() - Method in interface nxopen.geometricutilities.ModlMotion
Returns the "from point" of ModlMotion.Options.POINT_TO_POINT motion option.
fromPointBuilder() - Method in interface nxopen.cam.NcmWedmBuilder
Returns the from point builder
License requirements: cam_base ("CAM BASE")
.
fromPointMode() - Method in interface nxopen.cam.TurnAvoidanceFromBuilder
Returns the from point mode
License requirements: None.
fromPointSet() - Method in interface nxopen.geometricutilities.PointSetAlignmentBuilder
Returns the "from" point set
License requirements: None.
fromPointStatus() - Method in interface nxopen.cam.WedmBasedGeomBuilder
Returns the From Point Status
License requirements: cam_base ("CAM BASE")
.
fromPointToolAxis() - Method in interface nxopen.cam.WedmBasedGeomBuilder
Returns the From Point Tool Axis
License requirements: cam_base ("CAM BASE")
.
fromSeedStart - Variable in class nxopen.CurveChainRule.Data
True: the chain starts from the start point of the seed curve
fromSeedStart - Variable in class nxopen.CurveFeatureChainRule.Data
True: the chain starts from the start point of the seed curve
fromSeedStart - Variable in class nxopen.FollowFilletRule.Data
True: the chain starts from the start point of the seed wireframe
fromStart - Variable in class nxopen.features.EdgeBlendBuilder.SetbackData
if true, then the setback is defined at the start vertex.
fromStart - Variable in class nxopen.features.EdgeBlendBuilder.StopshortData
if true, then the stopshort is defined at the start vertex.
fromStart - Variable in class nxopen.uf.UFModl.EdgeBlendSetbackData
 
fromStart - Variable in class nxopen.uf.UFModl.EdgeBlendStopshortData
 
fromStation() - Method in interface nxopen.tooling.StripLayoutBuilder
Returns the From Station type on the Layout group of Strip Layout Design dialog
License requirements: None.
fromTrailingEdge() - Method in interface nxopen.cam.MillCutParameters
Returns the from trailing edge
License requirements: None.
fromVector() - Method in interface nxopen.features.MoveFaceBuilder
Returns the from vector in axis to axis option in move face, don't use it until nx502
License requirements: None.
fromVector() - Method in interface nxopen.formboard.OrientBranchBuilder
Deprecated.
Deprecated in NX8.5.0. This builder attribute is no longer required.
fromView() - Method in interface nxopen.drawings.ViewProjectionBuilder
Returns the from view
License requirements: nx_layout ("NX Layout")
.
FRONT - Static variable in class nxopen.cam.ToolChangeCiBuilder.HeadDesignationTypes
Front
FRONT - Static variable in class nxopen.display.Stage.WallType
The front wall of the stage.
FRONT - Static variable in class nxopen.drawings.View2dOrientBuilder.Type
front view
FRONT - Static variable in class nxopen.features.vehicledesign.CrashBarrierBuilder.SideOverlapSideType
 
FRONT - Static variable in class nxopen.features.vehicledesign.DynamicCurbBuilder.PositionType
 
FRONT - Static variable in class nxopen.features.vehicledesign.GroundClearanceBuilder.PositionType
 
FRONT - Static variable in class nxopen.features.vehicledesign.OilPanBuilder.PositionType
 
FRONT - Static variable in class nxopen.features.vehicledesign.PendulumPlacementBuilder.LocationType
 
FRONT - Static variable in class nxopen.features.vehicledesign.SlopeBuilder.PositionType
 
FRONT - Static variable in class nxopen.features.vehicledesign.StaticCurbBuilder.PositionType
Front
FRONT - Static variable in class nxopen.features.vehicledesign.WheelCoveringBuilder.PositionType
Creates checking surface for front wheel only
FRONT - Static variable in class nxopen.features.vehicledesign.WheelFixingBuilder.PositionType
 
FRONT - Static variable in class nxopen.Light.SceneType
Light from the front of the view (at the observer's location
FRONT - Static variable in class nxopen.tooling.AssemblyDrawingBuilder.ModelViewToUseValue
 
FRONT - Static variable in class nxopen.View.Canned
 
FRONT_LEFT - Static variable in class nxopen.drawings.StandardViewsBuilder.Type
front, left
FRONT_PASSENGER - Static variable in class nxopen.HumanPosturePredictionBuilder.OccupantType
Indicate Front passenger
FRONT_RIGHT - Static variable in class nxopen.drawings.StandardViewsBuilder.Type
front, right
FRONT_TO_REAR - Static variable in class nxopen.features.vehicledesign.GroundClearanceBuilder.SurfaceLengthType
 
FRONT_TOP - Static variable in class nxopen.drawings.StandardViewsBuilder.Type
front, top
FRONT_TOP_LEFT - Static variable in class nxopen.drawings.StandardViewsBuilder.Type
front, top, left
FRONT_TOP_LEFT_ISO - Static variable in class nxopen.drawings.StandardViewsBuilder.Type
front, top, left, iso
FRONT_TOP_RIGHT - Static variable in class nxopen.drawings.StandardViewsBuilder.Type
front, top, right
FRONT_TOP_RIGHT_ISO - Static variable in class nxopen.drawings.StandardViewsBuilder.Type
front, top, right, iso
FRONT_VIEW - Static variable in class nxopen.features.vehicledesign.CloseRangeVisibilityBuilder.PositionMethods
Front view
FRONTAL_SOLVER - Static variable in class nxopen.uf.UFConstants
 
frontAngle() - Method in interface nxopen.features.vehicledesign.SlopeBuilder
Returns the expression containing the front angle.
frontAngle() - Method in interface nxopen.features.vehicledesign.StaticCurbBuilder
Returns the expression containing the front angle.
frontBottomOffset() - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder
Returns the bottom offset of the front surface section when the front surface section type is WheelCoveringBuilder.SurfaceSectionType.ADR42 .
frontClearance() - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder
Returns the clearance of the front surface section.
frontClip() - Method in interface nxopen.drawings.ViewStylePerspectiveBuilder
Returns the front clip toggle on the PERSPECTIVE tab of the View Style Dialog
License requirements: None.
frontClipDistance() - Method in interface nxopen.drawings.ViewStylePerspectiveBuilder
Returns the front clip distance data on the PERSPECTIVE tab of the View Style Dialog
License requirements: None.
frontClipping() - Method in interface nxopen.drawings.PerspectiveViewStyle
Returns the status of front clipping
License requirements: None.
frontClippingDistance() - Method in interface nxopen.display.CameraBuilder
Returns the front clipping distance
License requirements: None.
frontClippingDistance() - Method in interface nxopen.drawings.PerspectiveViewStyle
Returns the value of front clipping distance
License requirements: None.
frontCollector() - Method in interface nxopen.features.vehicledesign.BumperPendulumBuilder
Returns the selected front body.
frontCrossPosition() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
Returns the cross position type of front barrier.
frontDim() - Method in interface nxopen.features.vehicledesign.VisionPlaneBuilder
Returns the front dim; dimension here to front.
frontDraftAngle() - Method in interface nxopen.geometricutilities.MultiDraft
Returns the front draft angle.
frontFrontAngle() - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder
Returns the front angle of the front surface section.
frontFrontOffset() - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder
Returns the front offset of the front surface section when the front surface section type is WheelCoveringBuilder.SurfaceSectionType.ADR42 .
frontHeaderFeature() - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder
Returns the front header feature for this head impact study.
frontHeadRestGeometry() - Method in interface nxopen.features.vehicledesign.AllAroundVisionBuilder
Returns the faces representing the front head rest geometry to use as obstructing elements.
frontHeight() - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder
Returns the height of the front surface section when front the surface section type is WheelCoveringBuilder.SurfaceSectionType.ADR42 .
frontHeightAboveRoad() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
Returns the expression containing the height above road value of front barrier.
frontHubcapSelection() - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder
Returns the front hub cap selection.
frontInnerLength() - Method in interface nxopen.features.vehicledesign.DynamicCurbBuilder
Returns the expression defining the length of the inner line in front for dynamic curb.
frontInnerOffset() - Method in interface nxopen.features.vehicledesign.DynamicCurbBuilder
Returns the expression defining the value of inner offset in front for dynamic curb.
frontLoading() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
Returns the loading applied to the vehicle front used in the crash barrier.
frontLoading() - Method in interface nxopen.features.vehicledesign.SlopeBuilder
Returns the loading applied to the vehicle front used in the slope.
frontLoading() - Method in interface nxopen.features.vehicledesign.StaticCurbBuilder
Returns the loading applied to the vehicle front used in the static curb.
frontMeasuredFaces() - Method in interface nxopen.features.vehicledesign.StaticCurbBuilder
Returns the selected front faces for measurement.
frontObjects() - Method in interface nxopen.features.vehicledesign.SlopeBuilder
Returns the selected front faces for slope measurement.
frontObjectSelection() - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder
Returns the front object selection.
frontOffset() - Method in interface nxopen.features.vehicledesign.StaticCurbBuilder
Returns the expression containing the front offset.
frontOffsetValue() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
Returns the expression containing the offset value of the front section(at 0 degrees).
frontOuterOffset() - Method in interface nxopen.features.vehicledesign.DynamicCurbBuilder
Returns the expression defining the value of outer offset in front for dynamic curb.
frontOverhangExp() - Method in interface nxopen.features.vehicledesign.BaseDataBuilder
Returns the front overhang of the vehicle which is measured from the front wheel center point in the negative x direction.
frontOverlapPercentage() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
Returns the expression containing the overlap percentage of front barrier.
frontOverlapSide() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
Returns the overlap side type of front barrier.
frontPlane() - Method in interface nxopen.features.vehicledesign.VisionPlaneBuilder
Returns the front plane inclined angle.
frontPositionObject() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
Returns the positioing object type of front barrier.
frontRadius() - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder
Returns the radius of the front surface section when the front surface section type is WheelCoveringBuilder.SurfaceSectionType.CIRCLE_SECTION .
frontRearAngle() - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder
Returns the rear angle of the front surface section.
frontRearOffset() - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder
Returns the rear offset of the front surface section when the front surface section type is WheelCoveringBuilder.SurfaceSectionType.ADR42 .
frontRefAngle() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
Returns the angle that is used to determine the front reference line.
frontRefAngleMarginal() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
Returns the marginal angle that is used to determine the front reference line.
frontRefAngleNcap() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
Returns the European NCAP (New Car Assessment Program) angle that is used to determine the front reference line.
frontRefAngleNcapMarginal() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
Returns the European NCAP (New Car Assessment Program) marginal angle that is used to determine the front reference line.
frontReferenceAngleNcapSecondMarginal() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
Returns the European NCAP (New Car Assessment Program) second marginal angle that is used to determine the front reference line.
frontReferenceAngleSecondMarginal() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
Returns the second marginal angle that is used to determine the front reference line.
frontSelector() - Method in interface nxopen.features.vehicledesign.DynamicCurbBuilder
Returns the faces representing the front car body geometry for the measurement.
frontSelectPositioningObject() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
Returns the positioing objects of front barrier.
frontShape() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
Returns the shape type of front barrier.
frontShift() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
Returns the expression containing the shift value of front barrier.
frontShoulderRoom() - Method in interface nxopen.features.vehicledesign.BaseDataDriverBuilder
Returns the front shoulder room.
frontSurfacePlane() - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder
Returns the surface plane type of the front surface section.
frontSurfaceSection() - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder
Returns the surface section type of the front surface section.
frontUnderAxleFace() - Method in interface nxopen.features.vehicledesign.GroundClearanceBuilder
Returns the faces representing the car body geometry for measuring distance to the front under axle surface.
frontUserDefineWidth() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
Returns the user defined width type of front barrier.
frontUserDefineWidthValue() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
Returns the expression containing the user defined width value of front barrier.
frontView() - Method in interface nxopen.drawings.ViewCreationWizardBuilder
Returns the front view
License requirements: None.
FRONTWARD - Static variable in class nxopen.features.vehicledesign.BaseDataPassengerBuilder.SeatDirectionOptions
Seat position driving direction
frontWheel() - Method in interface nxopen.features.vehicledesign.BaseDataLoadingBuilder
Returns the front wheel data of this loading.
FROZEN - Static variable in class nxopen.cae.optimization.TBSTopologyRestrictAreaBuilder.CheckTypeOption
All elements of the element group which do not undergo any changes during optimization
FROZEN_LAYER_RATIO - Static variable in class nxopen.tooling.FlowDisplayBuilder.AnalysisResults
 
frozenDelayed - Variable in class nxopen.PartDelayedUpdateStatus.DelayStatusInfo
The part is frozen for all sessions.
FS_RGB - Static variable in class nxopen.ModelingViewHighQualityImage.DisplayTechniqueType
The pixel conversion process uses the Floyd-Steinberg dither algorithm to distribute the color error across the picture.
FS_RGB_PLUS_NOISE - Static variable in class nxopen.ModelingViewHighQualityImage.DisplayTechniqueType
The Floyd-Steinberg algorithm is augmented with the addition of random noise to the initial RGB values before the dither takes place.
fsyncarcs - Variable in class nxopen.uf.UFSf.GeomOptions
 
fsyncconics - Variable in class nxopen.uf.UFSf.GeomOptions
 
fsynccsys - Variable in class nxopen.uf.UFSf.GeomOptions
 
fsynclines - Variable in class nxopen.uf.UFSf.GeomOptions
 
fsyncpoints - Variable in class nxopen.uf.UFSf.GeomOptions
 
fsyncsketchcurves - Variable in class nxopen.uf.UFSf.GeomOptions
 
fsyncsplines - Variable in class nxopen.uf.UFSf.GeomOptions
 
FT_POUND_FORCE - Static variable in class nxopen.cae.FreeBodyResultsBuilder.OutputUnits
Load unit = "lbf", Moment unit lbf-ft
FT_POUND_FORCE - Static variable in class nxopen.cae.MechanicalLoadSumBuilder.UserUnit
Load unit = "lbf", Moment unit lbf-ft
FTK - Static variable in class nxopen.motion.GraphBuilder.PlotStyleChoices
To FTK
FTK_NAV_TREE_HISTORY_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
 
FTK_NAV_TREE_HISTORY_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
 
FTKManager - Interface in nxopen.cae.ftk
FTK function data manager
To obtain an instance of this class use Session.ftkmanager() .
ftkmanager() - Method in interface nxopen.Session
Returns the FTKManager belonging to this session
Created in NX3.0.0
FtmFixedCurvesBuilder - Interface in nxopen.geometricutilities
Represents a FtmFixedCurvesBuilder builder
To create a new instance of this class, use OmnicadManager.createFtmFixedCurvesBuilder()
Default values.
FtmFixedCurvesBuilder.FixedCurvesContinuityType - Class in nxopen.geometricutilities
Fixed curves continuity type
FtmFixedCurvesBuilderList - Interface in nxopen.geometricutilities
Represents a list of objects.
FtmTransformCurvesBuilder - Interface in nxopen.geometricutilities
Represents a FtmTransformCurvesBuilder builder
To create a new instance of this class, use OmnicadManager.createFtmTransformCurvesBuilder()
Default values.
FtmTransformCurvesBuilder.TransformCurvesContinuityType - Class in nxopen.geometricutilities
Transform curves continuity type
FtmTransformCurvesBuilderList - Interface in nxopen.geometricutilities
Represents a list of objects.
FtmTransformPointsBuilder - Interface in nxopen.geometricutilities
Represents a FtmTransformPointsBuilder builder
To create a new instance of this class, use OmnicadManager.createFtmTransformPointsBuilder()

Created in NX10.0.0
FtmTransformPointsBuilderList - Interface in nxopen.geometricutilities
Represents a list of objects.
FULL - Static variable in class nxopen.cae.optimization.TBSSmoothBuilder.OriginalSurfaceSmoothingOption
Allows any modifications to the original surface
FULL - Static variable in class nxopen.cae.optimization.TBSSmoothBuilder.ResultFiltering
Filters the element material values fully
FULL - Static variable in class nxopen.cae.ResultsManipulationBuilder.OutputResultType
 
FULL - Static variable in class nxopen.cam.InspectionMethodBuilder.UVModeTypes
Full circumference
FULL - Static variable in class nxopen.cam.MillingTrackpointBuilder.Types
Full
FULL - Static variable in class nxopen.features.HolePackageBuilder.ThreadLengthOptions
Length is full hole depth
FULL - Static variable in class nxopen.features.sheetmetal.DimpleBuilder.DimensionTypeOptions
the actual extent distance will be the value specified as depth.
FULL - Static variable in class nxopen.features.sheetmetal.JogBuilder.DimensionTypeOptions
the actual extent distance will be the value specified as depth.
FULL - Static variable in class nxopen.features.ShelfBuilder.LengthMethods
 
FULL - Static variable in class nxopen.geometricutilities.CircularFrameBuilder.Subtypes
Full circle
FULL - Static variable in class nxopen.geometricutilities.EndHoleData.ThreadLengthOptions
Length is full hole depth
FULL - Static variable in class nxopen.Session.ProjectAssignmentState
to assign project to all objects
FULL_BOTH_EDGES - Static variable in class nxopen.features.sheetmetal.BridgeTransitionBuilder.WidthOptions
Bridge Transition spans the full length of both the edges.
FULL_CIRCLE - Static variable in class nxopen.SketchPattern.InstanceControl
The pattern instance control type is Full Circle
FULL_CYCLE - Static variable in class nxopen.cae.Post.AnimationControl
 
FULL_EDGE - Static variable in class nxopen.features.sheetmetal.FlangeBuilder.WidthTypeOptions
The flange spans the entire edge.
FULL_END_EDGE - Static variable in class nxopen.features.sheetmetal.BridgeTransitionBuilder.WidthOptions
Bridge Transition spans the full length of end edge.
FULL_GRID - Static variable in class nxopen.cae.xyplot.ContouringRange
Option to show contour range on the face of the grid
FULL_PART - Static variable in class nxopen.drawings.SectionViewBuilder.SectionCutType
 
FULL_RENDER - Static variable in class nxopen.display.TrueStudioBuilder.RenderMethod
All rendering effects are honored.
FULL_SCALE - Static variable in class nxopen.CGMBuilder.SizeOption
Full Scale
FULL_SCALE - Static variable in class nxopen.PrintPDFBuilder.SizeOption
Full Scale
FULL_SHATTER - Static variable in class nxopen.JtCreator.FileStructure
FULL_SHATTER
FULL_SINE_WAVE - Static variable in class nxopen.cae.DurabilityLoadPatternBuilder.PatternTypeEnum
Full
FULL_SIZE_FRACTION - Static variable in class nxopen.annotations.DimensionTextFormat
Specifies full size fraction format
FULL_SIZE_FRACTION - Static variable in class nxopen.uf.UFDrf.FractionType
 
FULL_START_EDGE - Static variable in class nxopen.features.sheetmetal.BridgeTransitionBuilder.WidthOptions
Bridge Transition spans the full length of start edge.
FULL_UNIT_CYCLE - Static variable in class nxopen.uf.UFSf.LvFunctionMode
 
FULL_VEHICLE - Static variable in class nxopen.features.vehicledesign.GroundClearanceBuilder.SurfaceLengthType
 
FULL_WIDTH - Static variable in class nxopen.features.sheetmetal.SheetmetalManagerFlangeWidthOption
full width
FULL_WIDTH_TYPE - Static variable in class nxopen.uf.UFNxsm.FlangeWidthOption
 
fullCircle() - Method in interface nxopen.annotations.CircleCenterlineBuilder
Returns the method which returns full or partial circle flag
License requirements: None.
fullCircle() - Method in interface nxopen.geometricutilities.CurveLimitsData
Returns the full circle
License requirements: None.
fullCutcomOutput - Variable in class nxopen.uf.UFPath.Cutcom
 
fullCycle - Variable in class nxopen.cae.Post.Animation
 
fullDescription - Variable in class nxopen.RuleManager.FunctionInformation
Full description of function
fullness() - Method in interface nxopen.features.BlendCornerBuilder
Returns the fullness value.
fullness() - Method in interface nxopen.features.FillHoleBuilder
Returns the fullness
License requirements: None.
FULLNESS - Static variable in class nxopen.features.FillHoleBuilder.ShapeControlTypes
 
fullnessPoint() - Method in interface nxopen.features.FillHoleBuilder
Returns the point at corner A.
fullNumChars - Variable in class nxopen.uf.UFDrf.DraftAidText
 
fullPath() - Method in interface nxopen.BasePart
Returns the full path of the part.
fullPathForAssociatedCadPart() - Method in interface nxopen.cae.BaseFemPart
Returns the full pathname of the associated cad part
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
fullSceneAntialiasing() - Method in interface nxopen.preferences.SessionVisualizationVisual
Returns the scene antialiasing flag.
fullString - Variable in class nxopen.uf.UFDrf.DraftAidText
 
FULLY_CONTROLLED_TEXT - Static variable in class nxopen.uf.UFDrf.CustomSymbolTextType
 
FULLY_FIXED - Static variable in class nxopen.SketchConstraintBuilder.Constraint
 
FULLY_SHADED - Static variable in class nxopen.preferences.ShadingRenderingStyleOption
Fully shaded
FULLY_SHADED - Static variable in class nxopen.preferences.ViewVisualizationVisual.DisplayModeType
Deprecated.
Shading is applicable to all objects in view
FULLY_SHADED - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.ViewMode
The view is fully shaded
fullyDefinedColor() - Method in interface nxopen.preferences.PartSketch
Returns the sketch fully defined constraint color
License requirements: None.
FUNC - Static variable in class nxopen.motion.PlantOutputBuilder.Poutype
funtion type
FUNC_ABSOLUTE_FRAME - Static variable in class nxopen.uf.UFMotion.FuncRefFrameType
 
FUNC_ACCELERATION - Static variable in class nxopen.uf.UFMotion.FuncResultType
 
FUNC_ANGULAR_MAG - Static variable in class nxopen.uf.UFMotion.FuncComponentType
 
FUNC_DISPLACEMENT - Static variable in class nxopen.uf.UFMotion.FuncResultType
 
FUNC_EULER1COMP - Static variable in class nxopen.uf.UFMotion.FuncComponentType
 
FUNC_EULER2COMP - Static variable in class nxopen.uf.UFMotion.FuncComponentType
 
FUNC_EULER3COMP - Static variable in class nxopen.uf.UFMotion.FuncComponentType
 
FUNC_FORCE - Static variable in class nxopen.uf.UFMotion.FuncResultType
 
FUNC_LINEAR_MAG - Static variable in class nxopen.uf.UFMotion.FuncComponentType
 
FUNC_RELATIVE_FRAME - Static variable in class nxopen.uf.UFMotion.FuncRefFrameType
 
FUNC_VELOCITY - Static variable in class nxopen.uf.UFMotion.FuncResultType
 
FUNC_XCOMP - Static variable in class nxopen.uf.UFMotion.FuncComponentType
 
FUNC_YCOMP - Static variable in class nxopen.uf.UFMotion.FuncComponentType
 
FUNC_ZCOMP - Static variable in class nxopen.uf.UFMotion.FuncComponentType
 
function() - Method in interface nxopen.cae.DurabilityFunctionExcitationBuilder
Returns the function.
FUNCTION - Static variable in class nxopen.cae.DurabilityStaticEventBuilder.ExcitationTypeEnum
Function
Function - Interface in nxopen.cae
Represents a function object
To create or edit an instance of this class, use FunctionBuilder

Created in NX5.0.0
function() - Method in interface nxopen.cae.LaminateRandomEventBuilder
Deprecated.
Deprecated in NX10.0.0. Use LaminateDynamicEventBuilder.userFunction() instead.
function() - Method in interface nxopen.cae.responsesimulation.FunctionComponentData
Returns the function to be applied
License requirements: nx_response_anlys ("NX Response Analysis")
.
FUNCTION - Static variable in class nxopen.cae.xyplot.UnitSystem
Function unit
function() - Method in interface nxopen.geometricutilities.LawBuilder
Returns the function.
FUNCTION - Static variable in class nxopen.mechatronics.SystemRoot.Type
Function
function() - Method in interface nxopen.motion.DriverOperation
Returns the function
License requirements: None.
FUNCTION - Static variable in class nxopen.motion.DriverOperation.Type
Function
FUNCTION - Static variable in class nxopen.motion.ForceValueTypes
function type use function define force magnitude
function() - Method in interface nxopen.motion.PlantOutputBuilder
Returns the function
License requirements: nx_motion_cosim ("NX Motion CoSimulation")
.
function() - Method in interface nxopen.motion.ScalarForceBuilder
Returns the function
License requirements: None.
function() - Method in interface nxopen.motion.ScalarTorqueBuilder
Returns the function
License requirements: None.
Function() - Constructor for class nxopen.uf.UFMotion.Function
 
Function(String, String[], int) - Constructor for class nxopen.uf.UFMotion.Function
 
function - Variable in class nxopen.uf.UFMotion.JointMotionInput
 
Function.InterpolationMethod - Class in nxopen.cae
Defines interpolation method for table function to calculate data as input for solver
Function.Type - Class in nxopen.cae
Defines function type
FUNCTION1 - Static variable in class nxopen.features.GlobalShapingBuilder.TransitionType
Tangent continuous transition
FUNCTION2 - Static variable in class nxopen.features.GlobalShapingBuilder.TransitionType
Position continuous transition
FUNCTION_INPUT - Static variable in class nxopen.uf.UFMotion.JointMotionInputType
 
FUNCTION_RESPONSE - Static variable in class nxopen.cae.responsesimulation.RSEvent.ResultFileType
Result file to contain function response evaluation results, which extenstion is ".afu"
FUNCTIONAL - Static variable in class nxopen.cam.InspectionMethodBuilder.LimitsOfSizeTypes
Functional
FunctionArgumentsInformation() - Constructor for class nxopen.RuleManager.FunctionArgumentsInformation
 
FunctionArgumentsInformation(String, String, String, String, String, String, String) - Constructor for class nxopen.RuleManager.FunctionArgumentsInformation
Constructor for the FunctionArgumentsInformation object.
FunctionBuilder - Interface in nxopen.cae
This builder class is used to create or edit Function objects.
FunctionBuilder.MathPlotData - Class in nxopen.cae
This class holds the data returned from FunctionBuilder.getMathPlotData()
FunctionBuilder.TableData - Class in nxopen.cae
This class holds the data returned from FunctionBuilder.getTableData()
FunctionBuilder.TypesData - Class in nxopen.cae
This class holds the data returned from FunctionBuilder.getTypes()
FunctionBuilder.UnitsData - Class in nxopen.cae
This class holds the data returned from FunctionBuilder.getUnits()
FunctionCollection - Interface in nxopen.cae
Represents a collection of function objects
To obtain an instance of this class, refer to BasePart

Created in NX5.0.0
FunctionComponentData - Interface in nxopen.cae.responsesimulation
Represents a function component setting of NodalFunctionExcitation on one direction
Created in NX5.0.0
functionComponentRx() - Method in interface nxopen.cae.responsesimulation.RotationalNodalFunctionExcitationBuilder
Returns the function component of Rx direction
License requirements: nx_response_anlys ("NX Response Analysis")
.
functionComponentRy() - Method in interface nxopen.cae.responsesimulation.RotationalNodalFunctionExcitationBuilder
Returns the function component of Ry direction
License requirements: nx_response_anlys ("NX Response Analysis")
.
functionComponentRz() - Method in interface nxopen.cae.responsesimulation.RotationalNodalFunctionExcitationBuilder
Returns the function component of Rz direction
License requirements: nx_response_anlys ("NX Response Analysis")
.
functionComponentX() - Method in interface nxopen.cae.responsesimulation.TranslationalNodalFunctionExcitationBuilder
Returns the function component of X direction
License requirements: nx_response_anlys ("NX Response Analysis")
.
functionComponentY() - Method in interface nxopen.cae.responsesimulation.TranslationalNodalFunctionExcitationBuilder
Returns the function component of Y direction
License requirements: nx_response_anlys ("NX Response Analysis")
.
functionComponentZ() - Method in interface nxopen.cae.responsesimulation.TranslationalNodalFunctionExcitationBuilder
Returns the function component of Z direction
License requirements: nx_response_anlys ("NX Response Analysis")
.
functionDataType() - Method in interface nxopen.cae.AfuData
Returns the data type of the AFU Data Record
License requirements: nx_ftk ("NX Advanced Graphing")
.
FunctionEvaluationOutputSettings - Interface in nxopen.cae.responsesimulation
Represents the output setting for function response evaluation .
FunctionEvaluationSetting - Interface in nxopen.cae.responsesimulation
Represents the abstract class of evaluation setting for function response evaluation
This is an abstract class, and cannot be created.
FunctionEvaluationSettingBuilder - Interface in nxopen.cae.responsesimulation
Represents the abstract builder class of evaluation setting for function response evaluation
This is an abstract class, and cannot be created.
FunctionInformation() - Constructor for class nxopen.RuleManager.FunctionInformation
 
FunctionInformation(String, int, String, String, String, boolean, boolean, String) - Constructor for class nxopen.RuleManager.FunctionInformation
Constructor for the FunctionInformation object.
functionItemRevisionId() - Method in interface nxopen.mechatronics.FunctionObjectBuilder
Deprecated.
Deprecated in NX8.5.0. Please use ObjectInformationBuilder instead.
FunctionObject - Interface in nxopen.mechatronics
Represents the Function object.
FunctionObjectBuilder - Interface in nxopen.mechatronics
Represents a FunctionObjectBuilder
To create a new instance of this class, use FunctionObjectCollection.createFunctionObjectBuilder(nxopen.mechatronics.FunctionObject)

Created in NX7.5.1
FunctionObjectBuilder.ParameterData - Class in nxopen.mechatronics
Defined Parameter Data Structure
FunctionObjectBuilder.RequirementData - Class in nxopen.mechatronics
Defined Requirement Data Structure
FunctionObjectCollection - Interface in nxopen.mechatronics
Represents a FunctionObjectCollection
To obtain an instance of this class, refer to MechatronicsManager

Created in NX7.5.1
functionObjectCollection() - Method in interface nxopen.mechatronics.MechatronicsManager
Returns the FunctionObjectCollection instance belonging to this part .
functionOptionSet() - Method in interface nxopen.mechatronics.FunctionObjectBuilder
Returns the option set
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
functions() - Method in interface nxopen.BasePart
Returns the CAE.FunctionCollection for this part
Created in NX5.0.0
functionTags - Variable in class nxopen.uf.UFMotion.FindAllFunctionsData
 
functionType - Variable in class nxopen.cae.ftk.OptionSetting.OptionData
Usage type of AFU Data Record used
functionType - Variable in class nxopen.cae.ftk.OptionSetting.RecordOptionData
Usage type of AFU Data Record used
functionType - Variable in class nxopen.cae.FunctionBuilder.TypesData
Math function or Table function
functionType - Variable in class nxopen.uf.UFSf.AskLvNxData
 
FUTABA - Static variable in class nxopen.tooling.DieBaseBuilder.CatalogOpt
catalog for FUTABA
FW - Static variable in class nxopen.features.shipdesign.SectionViewBuilder.DirectionOptions
 
FWD_PORT_IN_UP - Static variable in class nxopen.features.shipdesign.ThicknessDirectionBuilder.ThicknessDirectionType
Direction is Forward, Port, Inside or Up.
FWD_PORT_TO_IN_CTR - Static variable in class nxopen.features.shipdesign.PlateSystemBuilder.StiffenerDirectionType
Direction is Forward, Port, To Reference, Inside or Centered.
FWD_PORT_TO_IN_UP - Static variable in class nxopen.features.shipdesign.PlateSystemBuilder.StiffenerDirectionType
Direction is Forward, Port, To Reference, Inside or Up.
FXX - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
 
FXY - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
 
FYY - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
 
FZZ - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
 
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z _ 
Skip navigation links

Copyright 2011 Siemens Product Lifecycle Management Software Inc. All Rights Reserved.