- N - Static variable in class nxopen.cam.TurnToolBuilder.HolderStyles
-
N-Style
- N0 - Static variable in class nxopen.cam.TurnToolBuilder.ReliefAngleTypes
-
Relief angle type: N (0)
- N1024 - Static variable in class nxopen.features.RasterImage.MaxTextureSize
-
1024 x 1024 max size
- N16384 - Static variable in class nxopen.features.RasterImage.MaxTextureSize
-
16384 x 16384 max size
- N2048 - Static variable in class nxopen.features.RasterImage.MaxTextureSize
-
2048 x 2048 max size
- N32768 - Static variable in class nxopen.features.RasterImage.MaxTextureSize
-
32768 x 32768 max size
- N4096 - Static variable in class nxopen.features.RasterImage.MaxTextureSize
-
4096 x 4096 max size
- N512 - Static variable in class nxopen.features.RasterImage.MaxTextureSize
-
512 x 512 max size
- N8192 - Static variable in class nxopen.features.RasterImage.MaxTextureSize
-
8192 x 8192 max size
- nAlignsToCheck - Variable in class nxopen.uf.UFAssem.FindPrev16AlignsToCheckData
-
- nAllInterf - Variable in class nxopen.uf.UFClear.Summary
-
- name() - Method in interface nxopen.assemblies.productinterface.PropertyBuilder
-
Returns the name of a product interface provided by users
License requirements: None.
- name() - Method in interface nxopen.blockstyler.UIBlock
-
Returns the name of the block or BlockID
License requirements: None.
- name() - Method in interface nxopen.cae.BaseIteration
-
Returns the name of the iteration
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- name() - Method in interface nxopen.cae.BaseLoadcase
-
Returns the NX assigned name of the loadcase
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- name() - Method in interface nxopen.cae.BaseResultType
-
Returns the name for this result type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- name() - Method in interface nxopen.cae.CompanionResult
-
Returns the name given to this Solutions Companion Result object.
- name() - Method in interface nxopen.cae.CompanionResultBuilder
-
Returns the name given to this Solutions Companion Result object.
- name() - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
Returns the name.
- name() - Method in interface nxopen.cae.DurabilityEventOverridesBuilder
-
Returns the name.
- name() - Method in interface nxopen.cae.DurabilityEventStrengthSettingsBuilder
-
Returns the name.
- name() - Method in interface nxopen.cae.DurabilityRandomFatigueBuilder
-
Returns the name.
- name() - Method in interface nxopen.cae.DurabilityStressAxesBuilder
-
Returns the name.
- name() - Method in interface nxopen.cae.FunctionBuilder
-
Returns the function name.
- name() - Method in interface nxopen.cae.LaminateDynamicSimBuilder
-
Returns the name
License requirements: None.
- name() - Method in interface nxopen.cae.LaminateGlobalLayup
-
Returns the global layup name
License requirements: nx_lam_composites ("Laminate Composites")
.
- name() - Method in interface nxopen.cae.LaminateLayupOffset
-
Returns the name of the layup offset
License requirements: None.
- name() - Method in interface nxopen.cae.LaminateMatOrientation
-
Returns the name of the material orientation
License requirements: None.
- name() - Method in interface nxopen.cae.optimization.DAODesignVariableBuilder
-
Returns the design variable name
License requirements: None.
- name() - Method in interface nxopen.cae.optimization.DAOSolution
-
Returns the optimization solution name
License requirements: None.
- name() - Method in interface nxopen.cae.optimization.DAOSolutionBuilder
-
Returns the optimization solution name
License requirements: None.
- name() - Method in interface nxopen.cae.optimization.NameDescription
-
Returns the name
License requirements: None.
- name() - Method in interface nxopen.cae.PreTestExciterConfig
-
- name() - Method in interface nxopen.cae.PreTestExciterConfigBuilder
-
Returns the name
License requirements: None.
- name() - Method in interface nxopen.cae.PreTestSensorConfig
-
Returns the sensor selection configuration name
License requirements: None.
- name() - Method in interface nxopen.cae.PreTestSensorConfigBuilder
-
Returns the name
License requirements: None.
- name() - Method in interface nxopen.cae.PreTestSolution
-
Returns the pre-test name
License requirements: None.
- name() - Method in interface nxopen.cae.PreTestSolutionBuilder
-
Returns the pre-test name
License requirements: None.
- name() - Method in interface nxopen.cae.PrimitiveMeshBuilder
-
Returns the mesh object name.
- name() - Method in interface nxopen.cae.responsesimulation.ObjectLabel
-
Returns the object name
License requirements: nx_response_anlys ("NX Response Analysis")
.
- name() - Method in interface nxopen.cae.SimCondition
-
Returns the condition's name
License requirements: None.
- name() - Method in interface nxopen.cae.SimConditionParam
-
Returns the parameter name
License requirements: None.
- name() - Method in interface nxopen.cae.SimLoadRecipe
-
- name() - Method in interface nxopen.cam.CAMAttribute
-
Returns the name of the attribute
License requirements: None.
- name() - Method in interface nxopen.cam.CamGeneralPropertiesBuilder
-
- name - Variable in class nxopen.cam.CAMSetup.PartMaterialData
-
- name - Variable in class nxopen.cam.FeatureGeomBuilder.MaterialData
-
- name() - Method in interface nxopen.cam.GeneralPropertiesBuilder
-
Returns the name of the selected CAM object.
- name() - Method in interface nxopen.cam.HoldingSystemBuilder
-
Returns the holding system name
License requirements: None.
- name - Variable in class nxopen.cam.MillingTrackpointBuilder.Data
-
the name
- name - Variable in class nxopen.cam.MillingTrackpointBuilder.TrackPointData
-
the name
- name - Variable in class nxopen.cam.ToolBuilder.MaterialData
-
- name - Variable in class nxopen.cam.TrackingBuilder.Data
-
the name
- name() - Method in interface nxopen.CoordinateSystem
-
Returns the name of the coordinate system
License requirements: None.
- name() - Method in interface nxopen.CustomWidth
-
Returns the width name, specified as a NULL-terminated ASCII string
License requirements: None.
- name - Variable in class nxopen.DisplayManager.J3dData
-
entity name
- name() - Method in interface nxopen.drafting.DrawingCreationWizardBuilder
-
Returns the name.
- name() - Method in interface nxopen.drawings.DrawingRegionBuilder
-
Returns the name
License requirements: None.
- NAME - Static variable in class nxopen.drawings.ViewLabelTypes
-
- name() - Method in class nxopen.Enum
-
Returns the name of this enum
- name() - Method in interface nxopen.features.HumanBuilder
-
Returns the human name
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- name() - Method in interface nxopen.features.PartModuleBuilder
-
- name() - Method in interface nxopen.features.shipdesign.AnchorPoint
-
Returns the anchor name.
- name() - Method in interface nxopen.features.shipdesign.SteelDistributionBuilder
-
Returns the name
License requirements: None.
- name() - Method in interface nxopen.features.shipdesign.SubSystemBuilder
-
Returns
the name of the Subsystem and the name of the part created for the SubSystem by Transition
License requirements: None.
- name() - Method in interface nxopen.features.UserDefinedFeatureApplicationField
-
Returns the name of this field
License requirements: None.
- name() - Method in interface nxopen.features.vehicledesign.BaseDataLoadingBuilder
-
Returns the name of loading.
- name() - Method in interface nxopen.features.vehicledesign.BaseDataWheelBuilder
-
Returns the name of the wheel.
- name() - Method in interface nxopen.features.vehicledesign.PendulumPlacementBuilder
-
Returns the name of this pendulum.
- name() - Method in interface nxopen.fields.NameVariable
-
Returns the name of the variable
License requirements: None.
- name() - Method in interface nxopen.HumanData
-
Returns the name of the human feature
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- name() - Method in interface nxopen.HumanPosturePredictionBuilder
-
Returns the name of posture prediction, it is an internal name for posture prediction, and it does not display on
user interface
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- name() - Method in interface nxopen.INXObject
-
Returns the custom name of the object.
- name() - Method in interface nxopen.layout2d.ComponentNameBuilder
-
Returns the JA method support for accessing and setting Component Name value,
NOTE: Client must free the returned TEXT_p_t* with TEXT_free
License requirements: None.
- name - Variable in class nxopen.MeasureAngle.CreateEmbeddedObjectData
-
the name of the measurement
- name - Variable in class nxopen.MeasureBodies.CreateEmbeddedObjectData
-
the name of the measurement
- name - Variable in class nxopen.MeasureDistance.CreateEmbeddedObjectData
-
the name of the measurement
- name - Variable in class nxopen.MeasureFaces.CreateEmbeddedObjectData
-
the name of the measurement
- name - Variable in class nxopen.MeasureLength.CreateEmbeddedObjectData
-
the name of the measurement
- name - Variable in class nxopen.MeasurePolarAngle.CreateEmbeddedObjectData
-
the name of the measurement
- name - Variable in class nxopen.MeasurePolarArea.CreateEmbeddedObjectData
-
the name of the measurement
- name - Variable in class nxopen.MeasurePolarRadius.CreateEmbeddedObjectData
-
the name of the measurement
- name() - Method in interface nxopen.mechatronics.CamProfileBuilder
-
Returns the cam profile name
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- name() - Method in interface nxopen.mechatronics.CollisionBodyBuilder
-
Returns the name.
- name() - Method in interface nxopen.mechatronics.CollisionMaterialBuilder
-
Returns the name.
- name() - Method in interface nxopen.mechatronics.CollisionSensorBuilder
-
Returns the name.
- name() - Method in interface nxopen.mechatronics.ComparisonResultAttribute
-
Returns the name of the attribute
License requirements: None.
- name() - Method in interface nxopen.mechatronics.DisplayChangerBuilder
-
Returns the name.
- name() - Method in interface nxopen.mechatronics.MotionProfileBuilder
-
Returns the name
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- name() - Method in interface nxopen.mechatronics.ObjectSinkBuilder
-
Returns the name.
- name() - Method in interface nxopen.mechatronics.ObjectSourceBuilder
-
Returns the name.
- name() - Method in interface nxopen.mechatronics.PhysicsConstraintBuilder
-
Returns the name.
- name() - Method in interface nxopen.mechatronics.PhysicsJointBuilder
-
Returns the name.
- name() - Method in interface nxopen.mechatronics.ReadWriteDeviceBuilder
-
Returns the name.
- name() - Method in interface nxopen.mechatronics.RigidBodyBuilder
-
Returns the name.
- name() - Method in interface nxopen.mechatronics.RuntimeBehaviorBuilder
-
Returns the name.
- name() - Method in interface nxopen.mechatronics.RuntimeNCBuilder
-
Returns the name.
- name() - Method in interface nxopen.mechatronics.SignalAdapterBuilder
-
Returns the name.
- name - Variable in class nxopen.mechatronics.SignalAdapterBuilder.SignalData
-
Name
- name() - Method in interface nxopen.mechatronics.TagFormBuilder
-
Returns the name.
- name() - Method in interface nxopen.mechatronics.TransportSurfaceBuilder
-
Returns the name.
- name() - Method in interface nxopen.menubar.ContextMenuEntry
-
Returns the name of this menu entry.
- name() - Method in interface nxopen.motion.BodyContactBuilder
-
Returns the name
License requirements: None.
- name() - Method in interface nxopen.motion.BushingDefine
-
Returns the name
License requirements: None.
- name() - Method in interface nxopen.motion.CouplerBuilder
-
Returns the name
License requirements: None.
- name() - Method in interface nxopen.motion.CurveOnCurveBuilder
-
Returns the name
License requirements: None.
- name() - Method in interface nxopen.motion.DamperBuilder
-
Returns the name
License requirements: None.
- name() - Method in interface nxopen.motion.FlexBodyBuilder
-
Returns the flexible body object name
License requirements: None.
- name() - Method in interface nxopen.motion.GeneralCouplerBuilder
-
Returns the 2-3 joint coupler name
License requirements: None.
- name() - Method in interface nxopen.motion.JointDefine
-
Returns the joint name
License requirements: mechanisms ("MECHANISMS")
.
- name() - Method in interface nxopen.motion.JointDriverBuilder
-
Returns the name
License requirements: None.
- name() - Method in interface nxopen.motion.LinkBuilder
-
Returns the name
License requirements: None.
- name() - Method in interface nxopen.motion.MarkerBuilder
-
Returns the name
License requirements: None.
- name() - Method in interface nxopen.motion.MotionSensorBuilder
-
Returns the name
License requirements: None.
- name() - Method in interface nxopen.motion.MotionSolutionBuilder
-
Returns the name
License requirements: None.
- name() - Method in interface nxopen.motion.PackagingBuilder
-
- name() - Method in interface nxopen.motion.PlantInputBuilder
-
Returns the name
License requirements: nx_motion_cosim ("NX Motion CoSimulation")
.
- name() - Method in interface nxopen.motion.PlantOutputBuilder
-
Returns the name
License requirements: nx_motion_cosim ("NX Motion CoSimulation")
.
- name() - Method in interface nxopen.motion.PMDCMotorBuilder
-
Returns the name
License requirements: nx_motion_motor ("NX Motion Motor")
.
- name() - Method in interface nxopen.motion.PointOnCurveBuilder
-
Returns the name
License requirements: None.
- name() - Method in interface nxopen.motion.PointOnSurfaceBuilder
-
Returns the name
License requirements: None.
- name() - Method in interface nxopen.motion.ScalarForceBuilder
-
Returns the name
License requirements: None.
- name() - Method in interface nxopen.motion.ScalarTorqueBuilder
-
Returns the name
License requirements: None.
- name() - Method in interface nxopen.motion.SignalChartBuilder
-
Returns the name
License requirements: nx_motion_motor ("NX Motion Motor")
.
- name() - Method in interface nxopen.motion.SpringBuilder
-
Returns the name
License requirements: None.
- name() - Method in interface nxopen.motion.VObject
-
Returns the name
License requirements: None.
- name() - Method in interface nxopen.NavigatorFilter
-
- name() - Method in interface nxopen.ObjectGeneralPropertiesBuilder
-
Returns the name.
- NAME - Static variable in class nxopen.partfamily.FamilyAttribute.AttrType
-
name attribute
- name() - Method in interface nxopen.partfamily.FamilyAttribute
-
Returns the name of the given attribute
License requirements: solid_modeling ("SOLIDS MODELING")
.
- name() - Method in interface nxopen.PhysicalMaterialBuilder
-
Returns the material name value.
- NAME - Static variable in class nxopen.preferences.GeneralDisplayIdOption
-
Name
- name() - Method in interface nxopen.preferences.LoadDraftingStandardBuilder
-
Returns the standard name
License requirements: None.
- name - Variable in class nxopen.preferences.PartFlexiblePrintedCircuitDesign.FlatPatternCalloutTypeDisplay
-
dialog name for the callout type.
- name - Variable in class nxopen.preferences.PartSheetmetal.FlatPatternCalloutTypeDisplay
-
dialog name for the callout type.
- name() - Method in interface nxopen.preferences.RoutingApplicationView
-
Returns the application view name.
- NAME - Static variable in class nxopen.preferences.RoutingMechanical.LineColorType
-
- NAME - Static variable in class nxopen.preferences.RoutingPart.PreferredPortMethod
-
Compare the ports name with a desired value.
- name - Variable in class nxopen.preferences.RoutingPartLibrary.Column
-
Column name.
- NAME - Static variable in class nxopen.preferences.SketchPreferences.DimensionLabelType
-
Displays only the name of the expression, such as P2
- name - Variable in class nxopen.routing.CharacteristicList.CharacteristicInformation
-
characteristic name
- name() - Method in interface nxopen.routing.electrical.ElectricalFormat
-
Returns the name of
ElectricalFormat
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
Created in NX5.0.1
- name - Variable in class nxopen.RuleManager.DebugRule
-
name of rule
- name - Variable in class nxopen.RuleManager.ParameterRule
-
name of the parameter
- NAME - Static variable in class nxopen.RuleManager.RuleType
-
- name - Variable in class nxopen.sheetmetal.FlatPatternSettings.FlatPatternCalloutTypeDisplay
-
dialog name for the callout type.
- name() - Method in interface nxopen.sim.KinematicAxisBuilder
-
Returns the kinematic axis's name
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- name() - Method in interface nxopen.sim.KinematicChain
-
Returns the name of the kinematic chain
License requirements: None.
- name() - Method in interface nxopen.sim.KinematicComponentBuilder
-
Returns the kim component's name
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- name() - Method in interface nxopen.sim.KinematicJunctionBuilder
-
Returns the kim junction's name
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- NAME - Static variable in class nxopen.sim.SimDebugBuilder.PrintoutTagsOrPointersType
-
Name
- name - Variable in class nxopen.uf.UFCgm.WidthCustom
-
- name - Variable in class nxopen.uf.UFCutter.TrackingPointData
-
- name - Variable in class nxopen.uf.UFCutter.TurnTrackingPointData
-
- name - Variable in class nxopen.uf.UFDisp.J3dEntity
-
- name - Variable in class nxopen.uf.UFFam.AttributeData
-
- name - Variable in class nxopen.uf.UFFam.ClassData
-
- name - Variable in class nxopen.uf.UFFam.FamilyData
-
- name - Variable in class nxopen.uf.UFFam.IntentData
-
- name - Variable in class nxopen.uf.UFFltr.AskBoxZoneData
-
- name - Variable in class nxopen.uf.UFFltr.AskFilterData
-
- name - Variable in class nxopen.uf.UFFltr.AskPlaneZoneData
-
- name - Variable in class nxopen.uf.UFGdt.Description
-
- name - Variable in class nxopen.uf.UFGdt.DrfData
-
- NAME - Static variable in class nxopen.uf.UFKf.Type
-
- name - Variable in class nxopen.uf.UFLayer.CategoryInfo
-
- name - Variable in class nxopen.uf.UFMotion.CurveCurveConstraint
-
- name - Variable in class nxopen.uf.UFMotion.CylindricalBushing
-
- name - Variable in class nxopen.uf.UFMotion.Function
-
- name - Variable in class nxopen.uf.UFMotion.GeneralBushing
-
- name - Variable in class nxopen.uf.UFMotion.Joint
-
- name - Variable in class nxopen.uf.UFMotion.JointCoupler
-
- name - Variable in class nxopen.uf.UFMotion.Link
-
- name - Variable in class nxopen.uf.UFMotion.Marker
-
- name - Variable in class nxopen.uf.UFMotion.Motion2DContact
-
- name - Variable in class nxopen.uf.UFMotion.Motion3DContact
-
- name - Variable in class nxopen.uf.UFMotion.PointCurveConstraint
-
- name - Variable in class nxopen.uf.UFMotion.ScalarForceTorque
-
- name - Variable in class nxopen.uf.UFMotion.SpringDamper
-
- name - Variable in class nxopen.uf.UFMotion.VectorForceTorque
-
- name - Variable in class nxopen.uf.UFParam.IndexAttribute
-
- name - Variable in class nxopen.uf.UFPatt.AskData
-
- name - Variable in class nxopen.uf.UFPd.ProductDefinition
-
- name - Variable in class nxopen.uf.UFRoute.AppViewDesc
-
- name - Variable in class nxopen.uf.UFRoute.CharDesc
-
- name - Variable in class nxopen.uf.UFRoute.SystemInterface
-
- name - Variable in class nxopen.uf.UFSket.Info
-
- name - Variable in class nxopen.uf.UFSket.InitializeSketchData
-
- name - Variable in class nxopen.uf.UFSmd.FpPrefs
-
- name - Variable in class nxopen.uf.UFSmd.PipNodeData
-
- name() - Method in interface nxopen.Unit
-
Returns the unit name
License requirements: None.
- name() - Method in interface nxopen.validate.RequirementBuilder
-
Returns the name of requirement
License requirements: None.
- name() - Method in interface nxopen.validate.ResultObject
-
- name1() - Method in interface nxopen.features.PartModuleBuilder
-
Returns the part module name
License requirements: None.
- NAME_ALREADY_EXISTS - Static variable in class nxopen.uf.UFConstants
-
- NAME_BASED - Static variable in class nxopen.geometricutilities.ParentEquivalencyMap.Type
-
mapped by name
- NAME_DOES_NOT_EXIST - Static variable in class nxopen.uf.UFConstants
-
- NAME_ONLY_STATE - Static variable in class nxopen.uf.UFClone.PartStateS
-
- NAME_TYPE - Static variable in class nxopen.Part.PartFamilyAttrType
-
Deprecated.
name attribute
- NAMED - Static variable in class nxopen.blockstyler.PropertyList.ListMode
-
The properties are named
- NAMED - Static variable in class nxopen.PropertyContainer.ListMode
-
The properties are named
- NameDescription - Interface in nxopen.cae.optimization
-
.
- nameDescription() - Method in interface nxopen.cae.optimization.TBSBaseDesignVariableBuilder
-
Returns the name description
License requirements: None.
- nameDescription() - Method in interface nxopen.cae.optimization.TBSConstraintBuilder
-
Returns the name description
License requirements: None.
- nameDescription() - Method in interface nxopen.cae.optimization.TBSOptimizationSolutionBuilder
-
Returns the name description
License requirements: None.
- nameDescription() - Method in interface nxopen.cae.optimization.TBSRestrictAreaBuilder
-
Returns the name description
License requirements: None.
- nameDescription() - Method in interface nxopen.cae.optimization.TBSSmoothBuilder
-
Returns the name description
License requirements: None.
- nameDisplay - Variable in class nxopen.uf.UFDrf.OrddispInfo
-
- nameDisplayFlag() - Method in interface nxopen.cae.CaeDOFSetDisplay
-
Returns the true/false flag based on whether the name of the DOF Set is
displayed in the graphics window
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- nameDisplayFlag() - Method in interface nxopen.cae.SimBCDisplay
-
Returns the true/false flag based on whether the name of the BC is
displayed in the graphics window
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- NamedPropertiesData() - Constructor for class nxopen.Session.NamedPropertiesData
-
- NamedPropTableWithTargetSet - Interface in nxopen.cae
-
Represents a Solver Specific Modeling Object with associated target set(s)
.
- namedReferenceType() - Method in interface nxopen.CGMBuilder
-
Returns the named reference type to be used when exporting a CGM to Teamcenter
License requirements: None.
- namedReferenceType() - Method in interface nxopen.PrintPDFBuilder
-
Returns the named reference type to be used when exporting a PDF to Teamcenter
License requirements: None.
- nameFilter() - Method in interface nxopen.routing.StockBrowserBuilder
-
Returns the stock name filter which defines filter to name stock
License requirements: routing_base ("Routing Basic")
.
- nameForDisplay(String) - Method in interface nxopen.uf.UFPart
-
- nameLocation() - Method in interface nxopen.DisplayableObject
-
Returns the location of the object's name.
- nameLocationSpecified() - Method in interface nxopen.FeatureGeneralPropertiesBuilder
-
Returns the name location specified.
- nameLocationSpecified() - Method in interface nxopen.ObjectGeneralPropertiesBuilder
-
Returns the name location specified.
- nameOfParameter() - Method in interface nxopen.cam.UdeParameter
-
Returns the name of the parameter
License requirements: None.
- nameOverride() - Method in interface nxopen.cae.LaminateImportedLayupBuilder
-
Returns the option to override the fibersim layup name with a user defined name
License requirements: None.
- namePrefix - Variable in class nxopen.uf.UFSket.AskPreferencesData
-
- namePrefix() - Method in interface nxopen.weld.SurfaceWeldBuilder
-
Returns the prefix used for the surface weld Design Feature name in Fourth Generation Design mode.
- namePrefix() - Method in interface nxopen.weld.WeldJointBuilder
-
Returns the prefix used for the welding joint Design Feature name in Collaborative Product Development mode
License requirements: None.
- nameRule() - Method in interface nxopen.tooling.EWDraftingBuilder
-
Returns the name rule used to create drafting part.
- NameRuleDef() - Constructor for class nxopen.uf.UFClone.NameRuleDef
-
- NameRuleDef(UFClone.NameRuleType, String, String) - Constructor for class nxopen.uf.UFClone.NameRuleDef
-
- names - Variable in class nxopen.mechatronics.ParameterStockBuilder.ParameterNamesAndTypesData
-
- names - Variable in class nxopen.routing.ReuseLibrary.PartLibraryGetChildNodesData
-
The discipline start node identifiers.
- names - Variable in class nxopen.routing.ReuseLibrary.PartLibraryGetDisciplineRootsData
-
The discipline start node identifiers.
- names - Variable in class nxopen.uf.UFCam.OptAskClsfNamesData
-
- names - Variable in class nxopen.uf.UFCam.OptAskDocNamesData
-
- names - Variable in class nxopen.uf.UFCam.OptAskPostNamesData
-
- names - Variable in class nxopen.uf.UFClone.AskCvtCallbacksData
-
- names - Variable in class nxopen.uf.UFClone.AskNtfyCallbacksData
-
- namesBorderVisualization() - Method in interface nxopen.preferences.PartPreferences
-
Returns object for doing Visualization preferences settings for Names/Border tab applicable to displayed part .
- nameSeed() - Method in interface nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder
-
Returns the name seed
License requirements: None.
- nameSelection - Variable in class nxopen.Selection.SelectionDescriptor
-
- nameStrData - Variable in class nxopen.uf.UFModl.UdfsDefData
-
- nameString() - Method in interface nxopen.cae.CfdContactPreventionConstraintBuilder
-
Returns the name string
License requirements: None.
- nameString() - Method in interface nxopen.cae.CfdLocalResolutionConstraintBuilder
-
Returns the name string
License requirements: None.
- nameToFrom() - Method in interface nxopen.routing.SplitRunBuilder
-
Returns the new run name to From section or not
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- nameVariable() - Method in interface nxopen.fields.FieldVariable
-
Returns the name variable for this variable.
- NameVariable - Interface in nxopen.fields
-
This class stores the common name and measure for field variables.
- NAMING_RULE - Static variable in class nxopen.uf.UFClone.NamingTechnique
-
- namingFailures - Variable in class nxopen.uf.UFClone.LoadLogfileData
-
- NamingFailures() - Constructor for class nxopen.uf.UFClone.NamingFailures
-
- NamingFailures(int, int[], String[], String[]) - Constructor for class nxopen.uf.UFClone.NamingFailures
-
- namingRule() - Method in interface nxopen.InterpartExpressionsBuilder
-
Returns the naming rule.
- namingTechnique - Variable in class nxopen.uf.UFClone.AskNamingData
-
- nAncestors - Variable in class nxopen.uf.UFKf.AskAncestorClassesData
-
- nArrangements - Variable in class nxopen.uf.UFAssem.AskArrangementsInPartData
-
- NARROW_BAND_MILES - Static variable in class nxopen.cae.DurabilityRandomFatigueBuilder.RandomFatigueMethodEnum
-
NarrowBandMiles
- NARROW_DISPLAY_NO_LEADER - Static variable in class nxopen.uf.UFDrf.NarrowDimensionDisplayType
-
- NARROW_DISPLAY_NONE - Static variable in class nxopen.uf.UFDrf.NarrowDimensionDisplayType
-
- NARROW_DISPLAY_TEXT_ABOVE_STUB - Static variable in class nxopen.uf.UFDrf.NarrowDimensionDisplayType
-
- NARROW_DISPLAY_TEXT_AFTER_STUB - Static variable in class nxopen.uf.UFDrf.NarrowDimensionDisplayType
-
- NARROW_DISPLAY_WITH_LEADER_NO_STUB - Static variable in class nxopen.uf.UFDrf.NarrowDimensionDisplayType
-
- NARROW_HORIZONTAL - Static variable in class nxopen.uf.UFDrf.NarrowDimensionTextOrientation
-
- NARROW_LEADER - Static variable in class nxopen.annotations.LineComponent.LineType
-
narrow leader line
- NARROW_PARALLEL - Static variable in class nxopen.uf.UFDrf.NarrowDimensionTextOrientation
-
- narrowArrowType() - Method in interface nxopen.annotations.DimensionStyleBuilder
-
Returns the narrow dimension arrowhead type which is used when there is no space for normal arrowheads
License requirements: None.
- narrowDimensionArrowheadType - Variable in class nxopen.uf.UFDrf.DimensionPreferences
-
- narrowDimensionArrowheadType - Variable in class nxopen.uf.UFDrf.DimensionPreferences1
-
- NarrowDimensionData - Class in nxopen.annotations
-
Specifies the narrow dimension preferences
- NarrowDimensionData() - Constructor for class nxopen.annotations.NarrowDimensionData
-
- NarrowDimensionData(NarrowDisplayOption, NarrowTextOrientation, double, double) - Constructor for class nxopen.annotations.NarrowDimensionData
-
Constructor for the NarrowDimensionData object.
- narrowDimensionData - Variable in class nxopen.uf.UFDrf.DimensionPreferences
-
- narrowDimensionData - Variable in class nxopen.uf.UFDrf.DimensionPreferences1
-
- NarrowDimensionInfo() - Constructor for class nxopen.uf.UFDrf.NarrowDimensionInfo
-
- NarrowDimensionInfo(UFDrf.NarrowDimensionDisplayType, UFDrf.NarrowDimensionTextOrientation, double, double) - Constructor for class nxopen.uf.UFDrf.NarrowDimensionInfo
-
- NarrowDimensionPreferences - Interface in nxopen.annotations
-
Represents narrow dimension preferences .
- NarrowDisplayOption - Class in nxopen.annotations
-
Specifies the narrow dimension display option
- narrowDisplayType() - Method in interface nxopen.annotations.DimensionStyleBuilder
-
Returns the display type for narrow dimensions
License requirements: None.
- narrowLeaderAngle() - Method in interface nxopen.annotations.DimensionStyleBuilder
-
Returns the narrow dimension leader angle
License requirements: None.
- narrowTextOffset() - Method in interface nxopen.annotations.DimensionStyleBuilder
-
Returns the narrow dimension text offset
License requirements: None.
- narrowTextOrientation() - Method in interface nxopen.annotations.DimensionStyleBuilder
-
Returns the narrow dimension text orientation
License requirements: None.
- NarrowTextOrientation - Class in nxopen.annotations
-
Specifies the narrow dimension text orientation
- NASTRAN - Static variable in class nxopen.cae.Result.Filetype
-
- NASTRAN_XDB - Static variable in class nxopen.cae.Result.Filetype
-
- nastranBasic() - Method in interface nxopen.cae.LaminateRandomEventBuilder
-
- nastranBasicCsys() - Method in interface nxopen.cae.LaminateDynamicEventBuilder
-
Returns the nastran basic
License requirements: None.
- NATIVE - Static variable in class nxopen.annotations.ImportAutocadBlockBuilder.Type
-
OS Symbol
- NATIVE - Static variable in class nxopen.layout2d.Layout2dDefinitionLocation
-
- NATIVE - Static variable in class nxopen.PrintPDFBuilder.ActionOption
-
Export to native folder
- nativeFileBrowser() - Method in interface nxopen.cae.CorrelApplyAlignmentFromBuilder
-
Returns the native file browser
License requirements: None.
- nativeFileBrowser() - Method in interface nxopen.cae.PreTestExportUnvBuilder
-
Returns the native file browser
License requirements: None.
- nativeFileBrowser() - Method in interface nxopen.display.StudioImageCaptureBuilder
-
Returns the native file browser for image type to produce
License requirements: None.
- nativeFileBrowser() - Method in interface nxopen.features.shipdesign.ReadDataSetBuilder
-
Returns the file name of the data set from the native file system
License requirements: None.
- nativeFileBrowser() - Method in interface nxopen.mechatronics.GanttExportPLCopenBuilder
-
Returns the native file browser
License requirements: None.
- nativeFileUnits() - Method in interface nxopen.cae.PreTestExportUnvBuilder
-
Returns the native file units
License requirements: None.
- nativeImageFileBrowser() - Method in interface nxopen.display.SaveImageFileBrowserBuilder
-
Returns the Ray Traced Studio static image file browser
License requirements: None.
- NativePartLogicalObject - Interface in nxopen.pdm
-
Represents the class that contains information for the objects participating in import operation.
- nativeRfiFileName() - Method in interface nxopen.motion.FlexBodyBuilder
-
Returns the native RFI file name
License requirements: None.
- nativeToggle() - Method in interface nxopen.features.shipdesign.ReadDataSetBuilder
-
Returns the flag that represents if toggle is on the a file of the data set type can be retrieved from the Native file system
License requirements: None.
- nAttributes - Variable in class nxopen.uf.UFClone.AskAttributeValuesData
-
- NATURAL - Static variable in class nxopen.features.EnlargeBuilder.ExtensionTypes
-
Natural extension
- NATURAL - Static variable in class nxopen.features.TextBuilder.OrientationMethodOptions
-
Orientation along natural curve normals
- NATURAL - Static variable in class nxopen.features.TrimCurveBuilder.CurveExtensionTypes
-
Natural
- NATURAL - Static variable in class nxopen.preferences.SessionModeling.SurfaceExtensionOption
-
- NATURAL_CURVATURE - Static variable in class nxopen.features.TrimExtendBuilder.ExtensionMethods
-
Natural Curvature
- NATURAL_FREQUENCY - Static variable in class nxopen.cae.responsesimulation.ResponseDomainDefinitionMethod
-
- NATURAL_TANGENT - Static variable in class nxopen.features.TrimExtendBuilder.ExtensionMethods
-
Natural Tangent
- naturalFrequenciesChoice() - Method in interface nxopen.cae.LaminateSineEventBuilder
-
Returns the natural frequencies selection option
License requirements: None.
- naturalFrequenciesEnable() - Method in interface nxopen.cae.LaminateSineEventBuilder
-
Returns the natural frequencies option
License requirements: None.
- NATURALLY_VARYING - Static variable in class nxopen.features.FaceBlendBuilder.WidthMethod
-
Naturally Varying
- navigateToOrigin() - Method in interface nxopen.annotations.OrdinateDimension
-
Navigates to the ordinate origin of a given ordinate dimension
License requirements: None.
- navigateViolationLocationOption() - Method in interface nxopen.routing.DesignRuleViolationViewer
-
Returns the state of Violation Location toggle option,
if true: Navigate Violation Locations of current violation
if false: Navigate Violations.
- navigationStyle() - Method in interface nxopen.blockstyler.CompositeBlock
-
Returns the Navigation Style
License requirements: None.
- navigationStyleAsString() - Method in interface nxopen.blockstyler.CompositeBlock
-
Returns the Navigation Style as string
License requirements: None.
- NavigatorFilter - Interface in nxopen
-
- navigatorObject() - Method in interface nxopen.mechatronics.FunctionObjectBuilder
-
Returns the navigator object which holds the teamcenter attributes.
- navigatorObject() - Method in interface nxopen.mechatronics.LogicObjectBuilder
-
Returns the navigator object which holds the teamcenter attributes.
- nbend - Variable in class nxopen.uf.UFNxsm.RebendData
-
- nbend - Variable in class nxopen.uf.UFNxsm.UnbendData
-
- nBodies - Variable in class nxopen.uf.UFClear.InterfData
-
- nBoundaryEdges - Variable in class nxopen.uf.UFModl.SimplData
-
- nBoundaryFaces - Variable in class nxopen.uf.UFModl.SimplData
-
- nBoundaryFaces - Variable in class nxopen.uf.UFModlFeatures.AskHollowData
-
- nBoundaryFaces - Variable in class nxopen.uf.UFWave.AskLinkRegionSourcesData
-
- nbpoints() - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder
-
Returns the Number of Scan Points on the curve
License requirements: None.
- nbpoints() - Method in interface nxopen.cam.InspectionScanCurveBuilder
-
Returns the Number of Scan Points on the curve
License requirements: None.
- nbPointsBuilder() - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder
-
Returns the builder for the Number of Scan Points on the curve
License requirements: None.
- nbPointsBuilder() - Method in interface nxopen.cam.InspectionScanCurveBuilder
-
Returns the builder for the Number of Scan Points on the curve
License requirements: None.
- nbScanPoints() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the minimum number of scan points
License requirements: None.
- nbytes - Variable in class nxopen.uf.UFClone.Base64ToBytesData
-
- nCallbacks - Variable in class nxopen.uf.UFClone.AskCvtCallbacksData
-
- nCallbacks - Variable in class nxopen.uf.UFClone.AskNtfyCallbacksData
-
- NCAssistantBuilder - Interface in nxopen.cam
-
- NCAssistantBuilder.AnalysisTypes - Class in nxopen.cam
-
Analysis Type
- NCAssistantBuilder.ResultsData - Class in nxopen.cam
-
- NcChannelSelectionData - Interface in nxopen.sim
-
Represents the NcChannelSelectionData class object
Use the
NcChannelSelectionData
class to create a NcChannelSelectionData object.
- ncfeatObjs - Variable in class nxopen.uf.UFFbmGeom.AskFeaturesData
-
- ncgeom() - Method in interface nxopen.UFSession
-
- ncgroup() - Method in interface nxopen.UFSession
-
- nChildren - Variable in class nxopen.uf.UFSo.AskChildrenData
-
- ncline - Variable in class nxopen.mechatronics.RuntimeNCBuilder.RunCSEData
-
The NC Code for which CSE failed.
- nClipped - Variable in class nxopen.uf.UFView.AskVisibleObjectsData
-
- NCM_CLEAR_TRAVERSAL_ZERO - Static variable in class nxopen.cam.CAMObject.Attr
-
- NCM_OBSOLETE_CUSTOM_FEED - Static variable in class nxopen.cam.CAMObject.Attr
-
- NCM_OBSOLETE_ENGRET_TO_CLEARANCE - Static variable in class nxopen.cam.CAMObject.Attr
-
- NCM_OBSOLETE_LOCAL_RETRACT - Static variable in class nxopen.cam.CAMObject.Attr
-
- NCM_OBSOLETE_SEQ_CONTROL - Static variable in class nxopen.cam.CAMObject.Attr
-
- NcmAvoidancePointBuilder - Interface in nxopen.cam
-
- NcmAvoidancePointBuilder.PointStates - Class in nxopen.cam
-
the types available for avoidance point definition
- NcmAvoidancePointBuilder.ToolAxisUsages - Class in nxopen.cam
-
the types available for tool axis status
- NcmClearanceBuilder - Interface in nxopen.cam
-
- NcmClearanceBuilder.ClearanceTypes - Class in nxopen.cam
-
the types available for clearance
- NCMCT_KEEP_ASSEMBLY_CONSTRAINTS - Static variable in class nxopen.uf.UFLib.NcmctSetupReplaceMode
-
- NCMCT_ORIENT_MACHINE_ZERO_TO_MCS - Static variable in class nxopen.uf.UFLib.NcmctSetupReplaceMode
-
- NCMCT_SETUP_REPLACE_NONE - Static variable in class nxopen.uf.UFLib.NcmctSetupReplaceMode
-
- NCMCT_USE_ASSEMBLY_POSITIONING - Static variable in class nxopen.uf.UFLib.NcmctSetupReplaceMode
-
- NCMCT_USE_OLD_MACHINE_TRANSFORM - Static variable in class nxopen.uf.UFLib.NcmctSetupReplaceMode
-
- NCMCT_USE_PART_MOUNT_JUNCTION - Static variable in class nxopen.uf.UFLib.NcmctSetupReplaceMode
-
- NcmctPartMountingBuilder - Interface in nxopen.cam
-
Represents a
NcmctPartMountingBuilder
a "commit" of this object will perform the Part Mounting and no object is returned.
- NcmctPartMountingBuilder.LayerTypes - Class in nxopen.cam
-
Available types for layer options
- NcmctPartMountingBuilder.PositioningTypes - Class in nxopen.cam
-
Available types for positioning
- ncmEngage() - Method in interface nxopen.cam.LaserTeachMode
-
Returns the ncm engage
License requirements: None.
- NcmHoleDrilling - Interface in nxopen.cam
-
- NcmHoleMachining - Interface in nxopen.cam
-
- NcmHoleMachining.CutcomTypes - Class in nxopen.cam
-
Available types for cutter compensation in hole machining
- NcmHoleMachining.FinalTypes - Class in nxopen.cam
-
Available types for final clearance in hole machining
- NcmHoleMachining.InitialTypes - Class in nxopen.cam
-
Available types for initial clearance in hole machining
- NcmHoleMachining.OverlapTypes - Class in nxopen.cam
-
Available types for overlap types
- NcmHoleMachiningEngRet - Interface in nxopen.cam
-
Represents a builder for an inheritable double value in of a CAM.CAMObject
Created in NX7.5.0
- NcmHoleMachiningEngRet.EngRetTypes - Class in nxopen.cam
-
Available types for engage/retract in Planar Milling
- NcmLaserEngage - Interface in nxopen.cam
-
Represents Engage settings for laser non cutting moves .
- NcmLaserEngage.Type - Class in nxopen.cam
-
the Engage Type enum .
- NcmLaserRetract - Interface in nxopen.cam
-
Represents Retract settings for laser non cutting moves .
- NcmLaserRetract.Type - Class in nxopen.cam
-
the Retract Type enum .
- NcmPlanarBuilder - Interface in nxopen.cam
-
- NcmPlanarBuilder.CutcomTypes - Class in nxopen.cam
-
Available types for cutter compensation in planar milling
- NcmPlanarBuilder.FinalRet - Class in nxopen.cam
-
Available strategies for final retract in planar milling
- NcmPlanarBuilder.FinalTypes - Class in nxopen.cam
-
Available types for final clearance in planar milling
- NcmPlanarBuilder.InitialEng - Class in nxopen.cam
-
Available strategies for initial engage in planar milling
- NcmPlanarBuilder.InitialTypes - Class in nxopen.cam
-
Available types for initial clearance in planar milling
- NcmPlanarBuilder.PredrillPointsOutputOptions - Class in nxopen.cam
-
Available options for output of pre-drill points in planar milling
- NcmPlanarBuilder.TransferBetweenLevelsTypes - Class in nxopen.cam
-
Available types for transfer between levels in planar milling
- NcmPlanarBuilder.TransferBetweenRegionsTypes - Class in nxopen.cam
-
Available types for transfer between regions in planar milling
- NcmPlanarBuilder.TransferWithinLevelsTypes - Class in nxopen.cam
-
Available types for transfer within levels in planar milling
- NcmPlanarBuilder.TransferWithinLevelsWiths - Class in nxopen.cam
-
Available strategies for transfer within levels in planar milling
- NcmPlanarEngRetBuilder - Interface in nxopen.cam
-
Represents a builder for an inheritable double value in of a CAM.CAMObject
Created in NX5.0.0
- NcmPlanarEngRetBuilder.EngRetTypes - Class in nxopen.cam
-
Available types for engage/retract in Planar Milling
- NcmPlanarEngRetBuilder.MeasureHeightFrom - Class in nxopen.cam
-
Available types for the Height From which engage helical/ramp/plunge
is measured in Planar Milling
- ncmRetract() - Method in interface nxopen.cam.LaserTeachMode
-
Returns the ncm retract
License requirements: None.
- NcmScBuilder - Interface in nxopen.cam
-
- NcmScBuilder.SmoothingOptions - Class in nxopen.cam
-
Available options for smoothing behavior
- NcmScEngRetBuilder - Interface in nxopen.cam
-
Represents a builder for an inheritable double value in of a CAM.CAMObject
Created in NX5.0.0
- NcmScEngRetBuilder.EngRetTypes - Class in nxopen.cam
-
Available types for engage/retract in surface contouring
- NcmScEngRetBuilder.MeasureFromTypes - Class in nxopen.cam
-
Available types for the Height or Length from which the linear/helical/plunge
engage or linear/plunge retract is measured in Surface Contour Milling .
- NcmSmoothingBuilder - Interface in nxopen.cam
-
- NcmSmoothingBuilder.SmoothToleranceSources - Class in nxopen.cam
-
Available tolerance types for smoothing
- NcmSubopBuilder - Interface in nxopen.cam
-
- NcmSubopBuilder.DefaultRegionStartTypes - Class in nxopen.cam
-
Available types for default region start in subop milling
- ncmthd() - Method in interface nxopen.UFSession
-
- NcmTransfer - Interface in nxopen.cam
-
- NcmTransfer.TransferTypes - Class in nxopen.cam
-
Available types for transfer between regions in planar milling
- NcmTransferBuilder - Interface in nxopen.cam
-
- NcmTransferBuilder.AppDepMethodTypes - Class in nxopen.cam
-
Available methods for approach and departure
- NcmTransferBuilder.AppDepToolAxisOptions - Class in nxopen.cam
-
Available options for tool axis behavior
- NcmTransferBuilder.LongMotionTypes - Class in nxopen.cam
-
Available motion types for smooth
- NcmTransferBuilder.TraverseTypes - Class in nxopen.cam
-
Available types for traverse
- NcmTurningBuilder - Interface in nxopen.cam
-
Represents a CAM.NcmTurningBuilder
Created in NX6.0.0
- NcmTurnRoughBuilder - Interface in nxopen.cam
-
Represents a CAM.NcmTurnRoughBuilder
Created in NX6.0.0
- NcmTurnRoughFinishBuilder - Interface in nxopen.cam
-
Represents a CAM.NcmTurnRoughFinishBuilder
Created in NX6.0.0
- NcmTurnThreadBuilder - Interface in nxopen.cam
-
Represents a CAM.NcmTurnThreadBuilder
Created in NX6.0.0
- NcmTurnThreadBuilder.LocalReturnMainModes - Class in nxopen.cam
-
The Local Return Main modes options .
- NcmTurnThreadBuilder.LocalReturnModes - Class in nxopen.cam
-
The Local Return modes options .
- NcmTurnThreadBuilder.LocalReturnTypes - Class in nxopen.cam
-
The Cut regions type options .
- NcmWedmBuilder - Interface in nxopen.cam
-
Represents a CAM.NcmWedmBuilder
Created in NX7.5.0
- ncmWedmBuilder() - Method in interface nxopen.cam.WedmGeomBuilder
-
Returns the non-cutting builder
License requirements: None.
- ncmWedmBuilder() - Method in interface nxopen.cam.WedmOperationBuilder
-
Returns the non-cutting builder
License requirements: None.
- NcmWedmBuilder.CutcomOffTypes - Class in nxopen.cam
-
the types available for cutcom off .
- NcmWedmBuilder.CutcomOnTypes - Class in nxopen.cam
-
the types available for cutcom on .
- NcmWedmBuilder.GlobalStopPointMethodTypes - Class in nxopen.cam
-
the types available for stop points method .
- NcmWedmBuilder.GlobalStopPointTypes - Class in nxopen.cam
-
the types available for wedm stop points .
- NcmWedmBuilder.LeadInMethodTypes - Class in nxopen.cam
-
the types available for lead in method .
- NcmWedmBuilder.LeadOutMethodTypes - Class in nxopen.cam
-
the types available for lead out method .
- NcmWedmBuilder.LeadOutSameAsLeadInTypes - Class in nxopen.cam
-
the types available for lead out same as lead in .
- NcmWedmBuilder.NonTiltLeadInTypes - Class in nxopen.cam
-
the types available for non-tilt lead in .
- NCO - Static variable in class nxopen.cae.CorrelShapemetrictype
-
Shape metric type is Normalized Cross Orthogonality
- ncolumns - Variable in class nxopen.blockstyler.PropertyList.DoubleMatrixData
-
Number of Columns in the 2D matrix
- ncolumns - Variable in class nxopen.blockstyler.PropertyList.IntegerMatrixData
-
Number of Columns in the 2D matrix
- ncolumns - Variable in class nxopen.PropertyContainer.DoubleMatrixData
-
Number of Columns in the 2D matrix
- ncolumns - Variable in class nxopen.PropertyContainer.IntegerMatrixData
-
Number of Columns in the 2D matrix
- nComponents - Variable in class nxopen.uf.UFAssem.UpgradeStatus
-
- nContainment - Variable in class nxopen.uf.UFClear.Summary
-
- ncopies() - Method in interface nxopen.geometricutilities.PatternSpacing
-
Returns the number of copies the pattern will generated in this direction
License requirements: None.
- ncprog() - Method in interface nxopen.UFSession
-
- nCurveRefs - Variable in class nxopen.uf.UFCurve.AskProjCurvesData
-
- nCurves - Variable in class nxopen.uf.UFModl.SmcutoutData
-
- nCurves - Variable in class nxopen.uf.UFModl.SmpunchData
-
- NDIRECTION_OPTS - Static variable in class nxopen.uf.UFModl.SmholeDirectionType
-
- NE - Static variable in class nxopen.mechatronics.ExternalConnectionElementBuilder.ConditionType
-
not equal
- NEAR_TANTO - Static variable in class nxopen.cam.ToolPositioningBuilder.ToolPositioning
-
Near Tanto
- NEAREST - Static variable in class nxopen.cam.InspectionMethodBuilder.PointSequenceModeTypes
-
Nearest point
- NEAREST - Static variable in class nxopen.cam.InspectionPathBuilder.SequenceType
-
Nearest neighbor
- NEAREST - Static variable in class nxopen.cam.InspectionUVGridBuilder.StartPointType
-
Nearest point
- NEAREST - Static variable in class nxopen.formboard.LayoutLengthOptions.RoundingMethod
-
Lengths are rounded up or down
to the nearest increment value.
- NEAREST_NEIGHBOR - Static variable in class nxopen.cam.InspectionLinkPmiBuilder.PathOrderTypes
-
Path order optimization will use the nearest neighbor method
- NEAREST_NEIGHBOR - Static variable in class nxopen.cam.InspectionLinkPmiBuilder.PointOrderTypes
-
Point order optimization will use the nearest neighbor method
- NEAREST_NEIGHBOR1D - Static variable in class nxopen.fields.FieldEvaluator.InterpolationEnum
-
Locates the nearest point and returns its value
- NEAREST_NEIGHBOR2D - Static variable in class nxopen.fields.FieldEvaluator.InterpolationEnum
-
Locates the nearest point in a plane and returns its value
- NEAREST_NEIGHBOR3D - Static variable in class nxopen.fields.FieldEvaluator.InterpolationEnum
-
Locates the nearest point in space and returns its value
- NEAREST_NEIGHBOR_ND - Static variable in class nxopen.fields.FieldEvaluator.InterpolationEnum
-
Locates the nearest point in N dimensional space and returns its value
- NEAREST_POINT - Static variable in class nxopen.cae.ManualMorphBuilder.MapMethod
-
- NEAREST_POINTS - Static variable in class nxopen.fields.FieldEvaluator.InverseDistanceWeightingEnum
-
Sum of the weighted value of N nearest points (as a fraction of the total number of points), based on the inverse of the distance
- NEAREST_RGB - Static variable in class nxopen.ModelingViewHighQualityImage.DisplayTechniqueType
-
Conversion is to the nearest RGB value in the color lookup table.
- nearestPointOption() - Method in interface nxopen.features.ProjectCurveBuilder
-
Returns the nearest point option whether to project curve by nearest point or not.
- nearpoint - Variable in class nxopen.tooling.TraverseLoopBuilder.CheckGapData
-
End point of last selected object near to end point of existing loop string.
- NEARTO_VALUE - Static variable in class nxopen.cae.ResultProbeBuilder.IterationSelection
-
- NEAT_TRIM - Static variable in class nxopen.features.shipdesign.EndCutBuilder.LimitTypes
-
If this Limit Type is set, a datum plane feature, a face or a profile/plate body needs to be selected and the endcut will be trimmed to the selected geometry.
- NEAT_TRIM - Static variable in class nxopen.features.shipdesign.StiffenerLimitBuilder.LimitType
-
It will automatically create an End Cut that trim the stiffener to the selected geometry.
- NECK - Static variable in class nxopen.HumanData.SegmentScalingType
-
Indicate scaling of neck
- neckChamferAngle() - Method in interface nxopen.geometricutilities.StartHoleData
-
Returns the neck chamfer angle
License requirements: None.
- neckChamferEnabled() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the neck chamfer enabled - this is applicable for screw clearence hole type
with counterbore hole form
License requirements: None.
- neckChamferEnabled() - Method in interface nxopen.geometricutilities.StartHoleData
-
Returns the neck chamfer enabled
License requirements: None.
- neckChamferOffset() - Method in interface nxopen.geometricutilities.StartHoleData
-
Returns the neck chamfer offset
License requirements: None.
- neckClearance() - Method in interface nxopen.cam.CutParameters
-
Returns the Neck Clearance
License requirements: None.
- neckClearance() - Method in interface nxopen.cam.ToolPathSplitBuilder
-
Returns the Neck Clearance
License requirements: None.
- neckDiameter() - Method in interface nxopen.features.AnalyzePocketBuilder
-
Returns the neck diameter defines the diameter of the neck of T Cutter.
- neckDiameter() - Method in interface nxopen.features.BlendPocketBuilder
-
Returns the neck diameter defines the diameter of the neck of T Cutter.
- nedges - Variable in class nxopen.uf.UFModeling.AskSplitEdgesData
-
- nEdges - Variable in class nxopen.uf.UFModlFeatures.AskImprEdgesData
-
- nEdges - Variable in class nxopen.uf.UFNxsm.ClosedCornerData
-
- needleDirection() - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder
-
Returns the needle direction
License requirements: None.
- needleDirection() - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder
-
Returns the needle direction
License requirements: None.
- needleDirection() - Method in interface nxopen.geometricanalysis.SurfaceIntersectionBuilder
-
Returns the needle direction
License requirements: None.
- needleScale() - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
Returns the needles scale factor
License requirements: None.
- needleScale() - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
Returns the needle scale
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- NEG_XC - Static variable in class nxopen.cae.CorrelFineTuneAlignmentBuilder.AngleVector
-
- NEG_XC - Static variable in class nxopen.cae.CorrelFineTuneAlignmentBuilder.DistanceVector
-
- NEG_XY - Static variable in class nxopen.features.TabNoteCfgBuilder.Refplane
-
3 : - Xc-Yc plane
- NEG_YC - Static variable in class nxopen.cae.CorrelFineTuneAlignmentBuilder.AngleVector
-
- NEG_YC - Static variable in class nxopen.cae.CorrelFineTuneAlignmentBuilder.DistanceVector
-
- NEG_YZ - Static variable in class nxopen.features.TabNoteCfgBuilder.Refplane
-
4 : - Yc-Zc plane
- NEG_ZC - Static variable in class nxopen.cae.CorrelFineTuneAlignmentBuilder.AngleVector
-
- NEG_ZC - Static variable in class nxopen.cae.CorrelFineTuneAlignmentBuilder.DistanceVector
-
- NEG_ZM - Static variable in class nxopen.cam.SurfaceContourBuilder.AccessVectorMethodType
-
negative z-direction of MCS
- NEG_ZX - Static variable in class nxopen.features.TabNoteCfgBuilder.Refplane
-
5 : - Zc-Xc plane
- negate(double[]) - Method in interface nxopen.uf.UFVec2
-
- negate(double[]) - Method in interface nxopen.uf.UFVec3
-
- negated - Variable in class nxopen.uf.UFStd.PutSheetsInStlFileData
-
- negateFrame() - Method in interface nxopen.features.shipdesign.TransFrameBuilder
-
Returns the reverse index since where frames turn to opposite.
- negateOffsetsFlag() - Method in interface nxopen.routing.Stock
-
Returns the negate offsets flag of this
Stock
.
- NEGATIVE - Static variable in class nxopen.cae.Post.ClipSide
-
- NEGATIVE - Static variable in class nxopen.positioning.ConstraintReference.HalfSpace
-
Measure to the negative side of the surface
- NEGATIVE - Static variable in class nxopen.uf.UFModl.FeatureSigns
-
- NEGATIVE_HALF_PI_TO_ONE_HALF_PI - Static variable in class nxopen.cae.xyplot.PhaseRangeOption
-
Displays phase between -90 and 270
- NEGATIVE_INDEX - Static variable in class nxopen.uf.UFConstants
-
- NEGATIVE_MAX - Static variable in class nxopen.cae.AfuMathOperation.TimeToSrsResponseType
-
Negative Maximum
- NEGATIVE_NORMAL - Static variable in class nxopen.features.TrimBodyBuilder.DirectionType
-
- NEGATIVE_ONE_HALF_PI_TO_HALF_PI - Static variable in class nxopen.cae.xyplot.PhaseRangeOption
-
Displays phase between -270 and 90
- NEGATIVE_PI_TO_PI - Static variable in class nxopen.cae.xyplot.PhaseRangeOption
-
Displays phase between -180 and 180
- NEGATIVE_TWO_PI_TO_ZERO - Static variable in class nxopen.cae.xyplot.PhaseRangeOption
-
Displays phase between -360 and 0
- NEGATIVE_X - Static variable in class nxopen.die.KeywayBuilder.LocationType
-
-X relative to the center of the coordinate system
- NEGATIVE_X - Static variable in class nxopen.die.KeywayChildBuilder.LocationOption
-
Keyway built in negative x direction.
- NEGATIVE_X - Static variable in class nxopen.sim.KinematicAxisBuilder.AxisDirectionType
-
negative X-axis
- NEGATIVE_XCYCPLANE - Static variable in class nxopen.features.shipdesign.InverseBendingLinesBuilder.ReferencePlaneType
-
-XC-YC plane.
- NEGATIVE_Y - Static variable in class nxopen.die.KeywayBuilder.LocationType
-
-Y relative to the center of the coordinate system
- NEGATIVE_Y - Static variable in class nxopen.die.KeywayChildBuilder.LocationOption
-
Keyway built in negative y direction.
- NEGATIVE_Y - Static variable in class nxopen.sim.KinematicAxisBuilder.AxisDirectionType
-
negative Y-axis
- NEGATIVE_YCZCPLANE - Static variable in class nxopen.features.shipdesign.InverseBendingLinesBuilder.ReferencePlaneType
-
-YC-ZC plane.
- NEGATIVE_Z - Static variable in class nxopen.sim.KinematicAxisBuilder.AxisDirectionType
-
negative Z-axis
- NEGATIVE_ZCXCPLANE - Static variable in class nxopen.features.shipdesign.InverseBendingLinesBuilder.ReferencePlaneType
-
-ZC-XC plane.
- negativeFlushnessTolerance() - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder
-
Returns the negative tolerance for flushness
License requirements: solid_modeling ("SOLIDS MODELING")
.
- negativeGapTolerance() - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder
-
Returns the negative tolerance for gap
License requirements: solid_modeling ("SOLIDS MODELING")
.
- negativeInnerTolerance() - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
Returns the negative inner tolerance
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- negativeOuterTolerance() - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
Returns the negative outer tolerance
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- negativeX() - Method in interface nxopen.tooling.GeneralInsertBuilder
-
Returns the negative x
License requirements: None.
- negativeY() - Method in interface nxopen.tooling.GeneralInsertBuilder
-
Returns the negative y
License requirements: None.
- negativeZ() - Method in interface nxopen.tooling.GeneralInsertBuilder
-
Returns the negative z
License requirements: None.
- NEGPOSLIMIT_MINUS_LIMIT1LINE - Static variable in class nxopen.annotations.SearchCriteriaSurfaceFinishBuilder.ToleranceTypeOptions
-
negposlimit- limit 1 line
- NEGXM - Static variable in class nxopen.cam.ProbeInspectPointMoveBuilder.Direction
-
Negative XM
- NEGYM - Static variable in class nxopen.cam.ProbeInspectPointMoveBuilder.Direction
-
Negative YM
- NEGZM - Static variable in class nxopen.cam.ProbeInspectPointMoveBuilder.Direction
-
Negative ZM
- nEids - Variable in class nxopen.uf.UFModeling.AskFeatObjectData
-
- NEIGHBOR_BLEND - Static variable in class nxopen.features.DeleteFaceBuilder.SetbackOptions
-
Cap by setback along the neighbor of the selected blend.
- neighboringFactor() - Method in interface nxopen.cae.responsesimulation.CombinationEvaluationOptions
-
Returns the neighboring factor.
- neighborsEnabled() - Method in interface nxopen.features.ChangeShellThicknessBuilder
-
Returns the flag to select neighbor faces that have the same wall thickness value as the face selected.
- NEITHER - Static variable in class nxopen.die.WearPlateLocChildBuilder.PositionType
-
No locators.
- NEITHER - Static variable in class nxopen.die.WearPlateLocParentBuilder.PositionType
-
No locators.
- NEOHOOKE - Static variable in class nxopen.PhysicalMaterial.Type
-
Neo Hooke
- NEOHOOKETESTDATA - Static variable in class nxopen.PhysicalMaterial.Type
-
Neo Hooke - test data option
- NestModuleBuilder - Interface in nxopen.geometricutilities
-
- NET_RADIATIVE_FLUX - Static variable in class nxopen.cae.Result.Quantity
-
- NET_RADIATIVE_LOAD - Static variable in class nxopen.cae.Result.Quantity
-
- netlistLengthIncrement() - Method in interface nxopen.formboard.LayoutLengthOptions
-
Returns the connection list length increment.
- netlistRoundingMethod() - Method in interface nxopen.formboard.LayoutLengthOptions
-
Returns the rounding method to apply to Connection List lengths.
- Network - Interface in nxopen.positioning
-
Network for use in positioning objects in NX.
- Network.ObjectStatus - Class in nxopen.positioning
-
Specifies the solver status of a movable object.
- networkArrangementsMode() - Method in interface nxopen.positioning.ComponentNetwork
-
Returns
the arrangements mode for this network.
- NEUTRAL - Static variable in class nxopen.cae.BeamSectionOffsetOptions.Method
-
The offset coordindate system is defined in neutral way
- NEUTRAL - Static variable in class nxopen.cam.TurnToolBuilder.HolderHands
-
Hand: Neutral
- NEUTRAL - Static variable in class nxopen.features.shipdesign.DeckListItemBuilder.DatumDir
-
- NEUTRAL_AXIS - Static variable in class nxopen.features.shipdesign.InverseBendingLinesBuilder.NeutralMethodType
-
Neutral axis.
- NEUTRAL_FACTOR_VALUE - Static variable in class nxopen.preferences.PartSheetmetal.BendDefinitionMethodOptions
-
The neutral factor value method
- neutralAxisPercent() - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder
-
Returns the height of a line through the profile that maintains a constant length when the profile is bent.
- neutralCurve() - Method in interface nxopen.die.AddendumSectionBuilder
-
Returns the neutral curve.
- neutralFactor() - Method in interface nxopen.features.sheetmetal.BendOptions
-
Returns the neutral factor.
- neutralFactor() - Method in interface nxopen.features.sheetmetal.HemFlangeBuilder
-
Returns the neutral factor
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- neutralFactor() - Method in interface nxopen.features.sheetmetal.MetaformBuilder
-
Returns the neutral factor
License requirements: None.
- neutralFactor() - Method in interface nxopen.features.sheetmetal.ResizeNeutralFactorBuilder
-
Returns the neutral factor
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- neutralFactor - Variable in class nxopen.features.sheetmetal.SheetmetalBendParameters
-
Neutral factor value.
- neutralFactor() - Method in interface nxopen.tooling.DefineNeutralFactorBuilder
-
Returns the neutral factor used to calculate bend developed length
License requirements: None.
- neutralFactor() - Method in interface nxopen.tooling.PrebendBuilder
-
Returns the neutral factor assign into the divided bend faces
License requirements: None.
- neutralFactor - Variable in class nxopen.uf.UFNxsm.BendOption
-
- neutralFactorFormula() - Method in interface nxopen.tooling.DefineNeutralFactorBuilder
-
Returns the neutral factor formula option, decides which method used to calculate the neutral factor
License requirements: None.
- neutralFactorGlobal - Variable in class nxopen.uf.UFNxsm.BendOption
-
- neutralMethod() - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder
-
Returns the neutral method determines the curve that is used for measurements and calculations when un-bending the profile.
- neutralName() - Method in interface nxopen.cae.ElementCreateBuilder
-
Returns the element neutral name
License requirements: None.
- neutralName() - Method in interface nxopen.cae.ElementExtrudeBuilder
-
Returns the element neutral name
License requirements: None.
- neutralName() - Method in interface nxopen.cae.ElementProjectBuilder
-
Returns the element neutral name
License requirements: None.
- neutralName() - Method in interface nxopen.cae.ElementReflectBuilder
-
Returns the element neutral name
License requirements: None.
- neutralName() - Method in interface nxopen.cae.ElementRevolveBuilder
-
Returns the element neutral name
License requirements: None.
- neutralName() - Method in interface nxopen.cae.ElementTranslateBuilder
-
Returns the neutral name of the elements to be created
License requirements: None.
- neutralName() - Method in interface nxopen.cae.SpiderElementBuilder
-
Returns the element neutral name
License requirements: None.
- neutralOffset() - Method in interface nxopen.features.sheetmetal.MigratedPanelBuilder
-
Returns
the neutral offset (i.e., K Factor) expression.
- NEVER - Static variable in class nxopen.preferences.SessionPdm.UnpopulatedBehaviourType
-
- NEVER_REPOSITION - Static variable in class nxopen.cae.AssyFEModel.RepositionType
-
never reposition
- NEW - Static variable in class nxopen.cae.optimization.TBSSmoothBuilder.IsoType
-
Saves the surface gererated by Isocut
- NEW - Static variable in class nxopen.DxfdwgImporter.ImportToEnum
-
import dxf/dwg file to new part
- NEW - Static variable in class nxopen.features.MapleBuilder.AssociativityEnum
-
- NEW - Static variable in class nxopen.features.MirrorFaceBuilder.MirrorPlaneOptions
-
New Plane
- NEW - Static variable in class nxopen.features.shipdesign.PenetrationUtils.RequestState
-
- NEW - Static variable in class nxopen.features.SymmetricBuilder.PlaneOptions
-
new plane
- NEW - Static variable in class nxopen.geometricutilities.MirrorPattern.PlaneOptions
-
new plane
- NEW - Static variable in class nxopen.MeasureBuilder.RequirementType
-
- NEW - Static variable in class nxopen.PrintPDFBuilder.ActionOption
-
Create a new PDF document
- NEW - Static variable in class nxopen.uistyler.FileOperationData.FileOperationType
-
New file operation
- NEW - Static variable in class nxopen.weld.AutoPointBuilder.Types
-
new points are being created
- NEW_COMPONENT - Static variable in class nxopen.tooling.StandardPartBuilder.EditType
-
- NEW_COMPONENT - Static variable in class nxopen.weld.SurfaceWeldBuilder.DestinationTypes
-
- NEW_COMPONENT - Static variable in class nxopen.weld.WeldJointBuilder.DestinationTypes
-
Create a new componenent for each joint under the work part.
- NEW_CSYS - Static variable in class nxopen.Sketch.PlaneOption
-
Use new CSYS
- NEW_DESIGN - Static variable in class nxopen.tooling.QuickQuotationBuilder.DesignTypes
-
the design is a new design
- NEW_DESIGN_ELEMENT - Static variable in class nxopen.assemblies.DesignElementBuilder.SaveAsActionType
-
- NEW_DRIVE - Static variable in class nxopen.cam.TeachmodeProfileMoveBuilder.DriveGeometryTypes
-
Use New Drive Geometry
- NEW_PART - Static variable in class nxopen.IgesImporter.ImportToEnum
-
import iges file to new part
- NEW_PART - Static variable in class nxopen.Step203Importer.ImportToOption
-
import iges file to new part
- NEW_PART - Static variable in class nxopen.Step214Importer.ImportToOption
-
import iges file to new part
- NEW_PLANE - Static variable in class nxopen.features.DeleteFaceBuilder.CapOptionValues
-
new plane.
- NEW_PLANE - Static variable in class nxopen.features.MirrorCurveBuilder.PlaneOptions
-
new plane
- NEW_PLANE - Static variable in class nxopen.features.shipdesign.SplitProfilePlateBuilder.ToolOptionType
-
Create a new datum for the tool target.
- NEW_PLANE - Static variable in class nxopen.geometricutilities.BooleanToolBuilder.BooleanToolType
-
Tool consists of plane created on the fly
- NEW_PLANE - Static variable in class nxopen.Sketch.PlaneOption
-
Use new plane
- NEW_PLANE - Static variable in class nxopen.tooling.SplitSolidBuilder.ToolObjectOption
-
New Plane option
- NEW_POINT - Static variable in class nxopen.features.shipdesign.RollingLineBuilder.StartEvaluationTypes
-
Use the newly created, or specified, point as the seed point to start the evaluation.
- NEW_PRODUCT - Static variable in class nxopen.tooling.DieEngStampingOutputBuilder.DisplayProductType
-
- NEW_REVISION - Static variable in class nxopen.assemblies.DesignElementBuilder.SaveAsActionType
-
- NEW_REVISION - Static variable in class nxopen.uf.UFClone.Action
-
- NEW_SHEET - Static variable in class nxopen.drawings.DrawingRegionBuilder.RegionContinuation
-
- NEW_SHEET_DOWN - Static variable in class nxopen.drawings.DrawingRegionBuilder.RegionContinuation
-
- NEW_SHEET_LEFT - Static variable in class nxopen.drawings.DrawingRegionBuilder.RegionContinuation
-
- NEW_SHEET_RIGHT - Static variable in class nxopen.drawings.DrawingRegionBuilder.RegionContinuation
-
- NEW_SHEET_UP - Static variable in class nxopen.drawings.DrawingRegionBuilder.RegionContinuation
-
- NEW_SKETCH - Static variable in class nxopen.features.shipdesign.PenetrationRequest.CoutoutType
-
- newAlternateIdManager() - Method in interface nxopen.pdm.PartBuilder
-
Create an instance of a
AlternateIdManager
class that will be used to create alternate ID information while creating the new part.
- newAlternateIdManager() - Method in interface nxopen.pdm.PdmPart
-
Create an instance of a
AlternateIdManager
class that will be used to create alternate ID information on the part.
- newAngle(Unit, DisplayableObject, MeasureManager.EndpointType, DisplayableObject, MeasureManager.EndpointType, boolean) - Method in interface nxopen.MeasureManager
-
Create an angle measurement between two objects.
- newAngle(Unit, DisplayableObject, MeasureManager.EndpointType, DisplayableObject, MeasureManager.EndpointType, boolean, boolean) - Method in interface nxopen.MeasureManager
-
Create an angle measurement between two objects.
- newAngle(Unit, Point, Point, Point, boolean) - Method in interface nxopen.MeasureManager
-
Create an angle measurement between three points.
- newAngle(Unit, boolean, Point, Point, Point, boolean) - Method in interface nxopen.MeasureManager
-
Create an angle measurement between three points with the option to
create smart geometry.
- newAppendedText() - Method in interface nxopen.annotations.AnnotationManager
-
Creates a new AppendedText object
License requirements: None.
- newArbitraryTargetData() - Method in interface nxopen.annotations.DatumTargetCollection
-
Creates a new ArbitraryTargetData object
License requirements: None.
- newAssociativity() - Method in interface nxopen.annotations.AnnotationManager
-
Creates a new Associativity object
License requirements: None.
- newAttribute() - Method in interface nxopen.tooling.GeneralInsertBuilder
-
Create new attribute in Attribute of Object
License requirements: None.
- newAttribute() - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder
-
The action to new an attribute
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- newBaseDisplay(String, BasePart.Units) - Method in interface nxopen.PartCollection
-
Creates a new part and sets this part as the display part.
- newBeamSectionOffsetOptions() - Method in interface nxopen.cae.CaePart
-
- newBeamSectionOptions() - Method in interface nxopen.cae.CaePart
-
Creates a
BeamSectionOptions
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX6.0.0
- newBeamSectionOrientationOptions() - Method in interface nxopen.cae.CaePart
-
- newCaeFileContainer() - Method in interface nxopen.pdm.PdmSession
-
- newCaeGrmsearch() - Method in interface nxopen.Session
-
Creates a new CAE GRM Search object
License requirements: None.
- newChangeoverName() - Method in interface nxopen.tooling.ChangeoverManagementBuilder
-
Returns the new name of the selected changeover.
- newCheck(String, String) - Method in interface nxopen.validate.Requirement
-
- newCircularTargetData() - Method in interface nxopen.annotations.DatumTargetCollection
-
Creates a new CircularTargetData object
License requirements: None.
- newColor() - Method in interface nxopen.DisplayModification
-
Returns a new color for objects which will be modified.
- NewComponentBuilder - Interface in nxopen.layout2d
-
Represents a Builder for New 2D Component functionality which will create an empty 2D Component
instance and stores its definition in the local 2D Component folder
To create a new instance of this class, use
ComponentCollection.createNewComponentBuilder()
Created in NX10.0.0
- newComponentName() - Method in interface nxopen.assemblies.CreateNewComponentBuilder
-
Returns the new component name
License requirements: None.
- newComponents - Variable in class nxopen.assemblies.ComponentAssembly.RestructureComponentsData
-
Restructured components
- newControlPoint() - Method in interface nxopen.features.FlowBlendBuilder
-
The control point object's create function
License requirements: solid_modeling ("SOLIDS MODELING")
.
- newCoordinateNormalStrainX(double, double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the x direction normal strain of the same space point in a rotated
coordinate system from the strains at a space point in the body.
- newCoordinateNormalStrainY(double, double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the y direction normal strain of the same space point in a rotated
coordinate system from the strains at a space point in the body.
- newCoordinateNormalStressX(double, double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the x direction normal stress of the same space point in a rotated
coordinate system from the stresses at a space point in the body.
- newCoordinateNormalStressY(double, double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the y direction normal stress of the same space point in a rotated
coordinate system from the stresses at a space point in the body.
- newCoordinateShearStrainXy(double, double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the shear strain of the same space point in a rotated coordinate
system from the strains at a space point in the body.
- newCoordinateShearStressXy(double, double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the shear stress of the same space point in a rotated coordinate
system from the stresses at a space point in the body.
- newCustomSymbolData(String) - Method in interface nxopen.annotations.CustomSymbolCollection
-
- newDatabaseAttributeManager() - Method in interface nxopen.pdm.PartBuilder
-
Create an instance of a
DatabaseAttributeManager
class that will be used to modify database attributes while creating the new part.
- newDatabaseAttributeManager() - Method in interface nxopen.pdm.PdmPart
-
- newDatabasePersistentOptions() - Method in interface nxopen.Session
-
Creates a new database persistent option controller
License requirements: None.
- newDatabaseSessionOptions() - Method in interface nxopen.Session
-
Creates a new database session option controller
License requirements: None.
- newDatumData() - Method in interface nxopen.annotations.GdtDatumCollection
-
Creates new DatumData object
License requirements: None.
- newDatumReference() - Method in interface nxopen.annotations.AnnotationManager
-
Creates a new DatumReference object
License requirements: None.
- newDieBaseName() - Method in interface nxopen.tooling.DieBaseBuilder
-
Returns the new die base part name.
- newDimensionData() - Method in interface nxopen.annotations.AnnotationManager
-
Creates new DimensionData object
License requirements: None.
- newDisplay(String, Part.Units) - Method in interface nxopen.PartCollection
-
Creates a new .prt part and sets this part as the display part.
- newDisplayModification() - Method in interface nxopen.DisplayManager
-
Constructs a new nxopen.displayModification
object.
- newDistance(Unit, MeasureManager.MeasureType, DisplayableObject, DisplayableObject) - Method in interface nxopen.MeasureManager
-
Create a minimum or maximum distance measure between two objects.
- newDistance(Unit, MeasureManager.MeasureType, boolean, DisplayableObject, DisplayableObject) - Method in interface nxopen.MeasureManager
-
Create a minimum or maximum distance measure between two objects with the option to create smart geometry.
- newDistance(Unit, DisplayableObject) - Method in interface nxopen.MeasureManager
-
Create a radial distance measure for an arc or circle.
- newDistance(Unit, DisplayableObject, MeasureManager.RadialMeasureType) - Method in interface nxopen.MeasureManager
-
Create a radial/diameter distance measure for an arc or circle.
- newDistance(Unit, NXObject, NXObject) - Method in interface nxopen.MeasureManager
-
Create a minimum distance measure between two component groups/sets.
- newDistance(Unit, boolean, NXObject, NXObject) - Method in interface nxopen.MeasureManager
-
Create a minimum distance measure between two component groups/sets with
the option to create smart geometry.
- newDistance(Unit, DisplayableObject, Point3d, DisplayableObject, Point3d) - Method in interface nxopen.MeasureManager
-
Create a local minimum distance measure between two objects with start points.
- newDistance(Unit, boolean, DisplayableObject, Point3d, DisplayableObject, Point3d) - Method in interface nxopen.MeasureManager
-
Create a local minimum distance measure between two objects with start points
and the option to create smart geoemtry
Features.SewBuilder.Types of allowed input objects include - Point, Curve, Edge, Face, Body,
Datum Plane, Datum Axis, Facet Body.
- newDistance(Unit, DisplayableObject, DisplayableObject, Direction) - Method in interface nxopen.MeasureManager
-
Create a projected minimum distance measure between two objects.
- newDistance(Unit, DisplayableObject, DisplayableObject, Direction, MeasureManager.ProjectionType) - Method in interface nxopen.MeasureManager
-
Create a projected, minimum clearance or maximum clearance distance measure between two objects.
- newDistance(Unit, DisplayableObject, DisplayableObject, Direction, MeasureManager.ProjectionType, boolean) - Method in interface nxopen.MeasureManager
-
Create a projected, minimum clearance or maximum clearance distance measure between two objects with the
option to create smart geometry.
- newDrawingAutomationWizard() - Method in interface nxopen.DrawingUtils
-
Constructs a new DrawingAutomationWizard object.
- newDriveCurve() - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder
-
Returns the new drive curve builder
License requirements: None.
- NEWER - Static variable in class nxopen.layout2d.Layout2dDefinitionStatus
-
- newErrorList() - Method in interface nxopen.Session
-
Creates a new error list.
- newestVisibleUndoMark() - Method in interface nxopen.Session
-
Returns the newest visible undo mark
License requirements: None.
- newExpressionValues - Variable in class nxopen.uf.UFAssem.AssemblyDeformPartData
-
- newExpValues - Variable in class nxopen.uf.UFModl.UdfExpData
-
- newFace - Variable in class nxopen.uf.UFModlFeatures.CreateReparamSheetData
-
- newFaceProperties(Unit, Unit, double, ScCollector) - Method in interface nxopen.MeasureManager
-
Creates a face properties measurement object from a selection intent collector.
- newFaceProperties(Unit, Unit, double, IParameterizedSurface[]) - Method in interface nxopen.MeasureManager
-
Creates a face properties measurement object from the list of input faces.
- newFaceProperties() - Method in interface nxopen.preferences.SessionModeling
-
Returns the new face properties inheritance.
- newFaceSets() - Method in interface nxopen.weld.JointmarkBuilder
-
- newFcfData() - Method in interface nxopen.annotations.FcfCollection
-
Creates new FcfData object
License requirements: None.
- newFcfFrame() - Method in interface nxopen.annotations.AnnotationManager
-
Creates a new FcfFrame object
License requirements: None.
- newFcfFrameData() - Method in interface nxopen.annotations.AnnotationManager
-
Creates a new Fcf Frame Data object
License requirements: None.
- newFemSynchronizeOptions() - Method in interface nxopen.cae.FemPart
-
Creates a
FemSynchronizeOptions
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX4.0.0
- newFile() - Method in interface nxopen.assemblies.CreateNewComponentBuilder
-
Returns the file new object is get and set
License requirements: None.
- newFileManagement() - Method in interface nxopen.pdm.PdmSession
-
- newFileName() - Method in interface nxopen.FileNew
-
Returns the name of the new file being created
License requirements: None.
- newFillStrip(Point3d, double) - Method in interface nxopen.weld.WeldFillBuilder
-
Create a new fill strip.
- newFlangeProfile() - Method in interface nxopen.die.TrimFlangeDieAssistantBuilder
-
Creates a new flange profile item in the set
License requirements: None.
- newFont() - Method in interface nxopen.DisplayModification
-
Returns a new font (line style) for objects which will be modified
License requirements: None.
- newFrame - Variable in class nxopen.routing.FormboardFrameCollection.ImportPatternData
-
returning new frame
- NewGridData() - Constructor for class nxopen.DisplayModification.NewGridData
-
- newGuide() - Method in interface nxopen.weld.JointmarkBuilder
-
- newInstance - Variable in class nxopen.uf.UFWave.CopyComponentAsData
-
- newinterference - Variable in class nxopen.assemblies.ClearanceSet.InterferenceData
-
the flag for new interference
- newInterference - Variable in class nxopen.uf.UFClear.InterfData
-
- newItem() - Method in interface nxopen.weld.WeldJointBuilder
-
- newitembuilder - Variable in class nxopen.weld.WeldJointBuilder.NewlyCreatedJointsData
-
- newItemId() - Method in interface nxopen.tooling.ClonePart
-
Returns the item id in Teamcenter after renaming.
- newItemType() - Method in interface nxopen.tooling.ClonePart
-
Returns the item type in Teamcenter after renaming.
- newLabelData() - Method in interface nxopen.annotations.LabelCollection
-
Creates new LabelData object
License requirements: None.
- newLayer() - Method in interface nxopen.DisplayModification
-
Returns a new layer for objects which will be modified.
- newLayoutDefinition(LayoutDefinition.ArrangementType) - Method in interface nxopen.LayoutCollection
-
- newLbcGeneratorFromLoadRecipe() - Method in interface nxopen.cae.SimLoadRecipe
-
- newLeaderBundle() - Method in interface nxopen.annotations.AnnotationManager
-
Constructs a new LeaderBundle object
License requirements: None.
- newLength(Unit, ScCollector) - Method in interface nxopen.MeasureManager
-
Creates a arc length object for all the selected objects.
- newLength(Unit, DisplayableObject[]) - Method in interface nxopen.MeasureManager
-
Creates a arc length object for all the selected objects.
- newLevel() - Method in interface nxopen.JtCreator
-
- newLineWeldData() - Method in interface nxopen.annotations.WeldCollection
-
Creates new LineWeldData object.
- newListItem() - Method in interface nxopen.features.VarsweepBuilder
-
Create new list item
License requirements: None.
- newListItem(MotionSensor, boolean, int, int, double, double, double) - Method in interface nxopen.motion.SignalChartBuilder
-
- newListItemExpression(MotionSensor, boolean, int, int, Expression, Expression, Expression) - Method in interface nxopen.motion.SignalChartBuilder
-
Creates a new list item including expression
License requirements: nx_motion_motor ("NX Motion Motor")
.
- newListMarkerToNode(NXObject, int, int, boolean, double, double, double) - Method in interface nxopen.motion.FlexBodyBuilder
-
Creates a new list item
License requirements: mechanisms ("MECHANISMS")
.
- NEWLY_CREATED - Static variable in class nxopen.positioning.Constraint.SolverStatus
-
Not evaluated or suppressed since creation
- NewlyCreatedJointsData() - Constructor for class nxopen.weld.WeldJointBuilder.NewlyCreatedJointsData
-
- NEWMARK_BETA - Static variable in class nxopen.cae.responsesimulation.EvaluationParameters.AnalysisIntegrationMethod
-
- newMassProperties(Unit[], double, ScCollector) - Method in interface nxopen.MeasureManager
-
Creates a mass properties measurement object from a selection intent collection.
- newMassProperties(Unit[], double, boolean, ScCollector) - Method in interface nxopen.MeasureManager
-
Creates a mass properties measurement object from a selection intent collection with the option
to create smart geometry.
- newMassProperties(Unit[], double, IBody[]) - Method in interface nxopen.MeasureManager
-
Creates a mass properties measurement object from the list of input solid bodies.
- newMassProperties(Unit[], double[], ScCollector) - Method in interface nxopen.MeasureManager
-
Creates a mass properties measurement object from a selection collection of solid bodies.
- newMassProperties(Unit[], double[], boolean, ScCollector) - Method in interface nxopen.MeasureManager
-
Creates a mass properties measurement object from a selection collection of solid bodies with the option to
create smart geometry.
- newMassProperties(Unit[], double[], IBody[]) - Method in interface nxopen.MeasureManager
-
Creates a mass properties measurement object from the list of input solid bodies.
- newMasterCustomSymbolData() - Method in interface nxopen.annotations.AnnotationManager
-
- newMasterModelFile(String) - Method in interface nxopen.tooling.AssemblyDrawingBuilder
-
Create a new master model file
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- newMaterialName - Variable in class nxopen.uf.UFDisp.CopyMaterialData
-
- newMaterialOptions() - Method in interface nxopen.cae.CaePart
-
- newMaterialTag - Variable in class nxopen.uf.UFDisp.CopyMaterialData
-
- newMeshOption() - Method in interface nxopen.cae.ElementCreateBuilder
-
Returns the new mesh option
License requirements: None.
- newMeshOption() - Method in interface nxopen.cae.ElementExtrudeBuilder
-
Returns the new mesh option
License requirements: None.
- newMeshOption() - Method in interface nxopen.cae.ElementProjectBuilder
-
Returns the new mesh option
License requirements: None.
- newMeshOption() - Method in interface nxopen.cae.ElementReflectBuilder
-
Returns the new mesh option
License requirements: None.
- newMeshOption() - Method in interface nxopen.cae.ElementRevolveBuilder
-
Returns the new mesh option
License requirements: None.
- newMeshOption() - Method in interface nxopen.cae.ElementTranslateBuilder
-
Returns the option to create a new mesh or add the new elements to an existing mesh
License requirements: None.
- newMeshOption() - Method in interface nxopen.cae.SpiderElementBuilder
-
Returns the new mesh option
License requirements: None.
- newMfkId() - Method in interface nxopen.tooling.ClonePart
-
Returns the mfk id in Teamcenter after renaming.
- newMirrorPlane() - Method in interface nxopen.features.MirrorFaceBuilder
-
Returns the new mirror plane
License requirements: None.
- newNAllInterf - Variable in class nxopen.uf.UFClear.Summary
-
- newname - Variable in class nxopen.cam.MillingTrackpointBuilder.AddData
-
the final new object name,user should allocate memory for it first,
most length is UGUI_MAX_NAME_LEN
- newNContainment - Variable in class nxopen.uf.UFClear.Summary
-
- newNHard - Variable in class nxopen.uf.UFClear.Summary
-
- newNoteData() - Method in interface nxopen.annotations.NoteCollection
-
Creates a new NoteData object
License requirements: None.
- newNSoft - Variable in class nxopen.uf.UFClear.Summary
-
- newNTouching - Variable in class nxopen.uf.UFClear.Summary
-
- newObjTags - Variable in class nxopen.uf.UFSket.MirrorObjectsData
-
- newOptionsChangeList(LevelType, LevelLockedByDefault) - Method in interface nxopen.options.OptionsManager
-
Creates an instance of
ChangeList
class, in order to edit a set of options.
- newOptionsDraftingStandardChangeList(LevelType, String) - Method in interface nxopen.options.OptionsManager
-
- newOverlayParameters() - Method in interface nxopen.cae.xyplot.XYPlotManager
-
Creates an transient object
PlotParameters
to contain the settings
required by overlaying new records on a plot.
- newParameter() - Method in interface nxopen.annotations.SymbolCatalogBuilder
-
- newParametersData() - Method in interface nxopen.features.MeshSurfaceBuilder
-
Create a mesh parameters transient object data.
- newParents - Variable in class nxopen.uf.UFAssem.AssemblyDeformPartData
-
- newPart() - Method in interface nxopen.LinkedMirrorPartBuilder
-
Returns the target mirrored part in which the mirrored geometries are created
License requirements: solid_modeling ("SOLIDS MODELING")
.
- newPart - Variable in class nxopen.uf.UFPart.ExportOptions
-
- newPart(String, int) - Method in interface nxopen.uf.UFPart
-
- newPart - Variable in class nxopen.uf.UFWave.CopyComponentAsData
-
- newPartCleanup() - Method in interface nxopen.Session
-
Constructs a new PartCleanup object.
- newPartCloseResponses() - Method in interface nxopen.PartCollection
-
Constructs a new PartCloseResponses class.
- newPartFamilyMemberData() - Method in interface nxopen.Part
-
- newPartFamilyMemberValues() - Method in interface nxopen.Part
-
- newPartFamilyTemplateManager() - Method in interface nxopen.Part
-
Creates an instance of a
TemplateManager
class that will be used to manage part family associated with this part
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX9.0.0
- newPartFromPartBuilder() - Method in interface nxopen.pdm.PartManager
-
Create an instance of a part builder that creates a new part from an existing part.
- newPartFromTemplate(String, String, String) - Method in interface nxopen.uf.UFUgmgr
-
- newPartFromTemplateBuilder() - Method in interface nxopen.pdm.PartManager
-
- newPartName() - Method in interface nxopen.tooling.BendInsertDesignBuilder
-
Returns the new component name.
- newPartName() - Method in interface nxopen.tooling.ClonePart
-
Returns the part name (item name in Teamcenter) after renaming.
- newPartNames() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the new component names.
- newPartSymbolData(String) - Method in interface nxopen.annotations.CustomSymbolCollection
-
- newPath() - Method in interface nxopen.weld.WeldBeadBuilder
-
- newPathFrame() - Method in interface nxopen.mechatronics.PathConstraintJointBuilder
-
- newPdmListofvalues() - Method in interface nxopen.pdm.PdmSearchManager
-
Creates a new pdm search list of values
License requirements: None.
- newPdmSearch() - Method in interface nxopen.pdm.PdmSearchManager
-
Creates a new pdm search
License requirements: None.
- newPdmSearchresult() - Method in interface nxopen.pdm.PdmSearchManager
-
Creates a new pdm search result
License requirements: None.
- newPdmSoaquery() - Method in interface nxopen.pdm.PdmSearchManager
-
- newPendingComponentsManager(BasePart) - Method in interface nxopen.pdm.PartManager
-
Creates a pending component manager for a given part.
- newPierceHole(PierceItemBuilder.HoleShapeType) - Method in interface nxopen.die.PierceTaskBuilder
-
Creates a new pierce hole item in the set
License requirements: die_engineering ("DIE ENGINEERING")
.
- newPlane() - Method in interface nxopen.features.MirrorCurveBuilder
-
Returns the plane constructor
License requirements: None.
- newPlane() - Method in interface nxopen.geometricutilities.MirrorPattern
-
Returns the new plane
License requirements: None.
- newPlotParameters() - Method in interface nxopen.cae.xyplot.XYPlotManager
-
Creates an transient object
PlotParameters
to contain the
settings required by creating a plot.
- newPmiData() - Method in interface nxopen.annotations.AnnotationManager
-
Creates a new PmiData object
License requirements: None.
- newPoint(Point, CartesianCoordinateSystem, boolean) - Method in interface nxopen.MeasureManager
-
Create a point measurement between a point and either the absolute csys, or a
specified coordinate system.
- newPoints() - Method in interface nxopen.weld.JointmarkBuilder
-
- newPointsOnCurvesLength(Unit, Point[]) - Method in interface nxopen.MeasureManager
-
Creates a points on curves arc length object for all the selected objects.
- newPointsOverride() - Method in interface nxopen.weld.PointMarkBuilder
-
- newPolarAngle(Unit, MeasureManager.MeasureType, Point, Direction, ScCollector) - Method in interface nxopen.MeasureManager
-
Creates an extreme polar angle measurement from the collection of input curves.
- newPolarAngle(Unit, MeasureManager.MeasureType, Point, Direction, ScCollector, boolean) - Method in interface nxopen.MeasureManager
-
Creates an extreme polar angle measurement from the collection of input curves.
- newPolarArea(Unit, ScCollector, boolean) - Method in interface nxopen.MeasureManager
-
Creates an extreme polar area measurement from the collection of input curves.
- newPolarArea(Unit, ScCollector, boolean, boolean) - Method in interface nxopen.MeasureManager
-
Creates an extreme polar area measurement from the collection of input curves.
- newPolarRadius(Unit, MeasureManager.MeasureType, Point, ScCollector) - Method in interface nxopen.MeasureManager
-
Creates an extreme polar radius measurement from the collection of input curves.
- newPolarRadius(Unit, MeasureManager.MeasureType, Point, ScCollector, boolean) - Method in interface nxopen.MeasureManager
-
Creates an extreme polar radius measurement from the collection of input curves.
- newProfile() - Method in interface nxopen.features.MeshSurfaceBuilder
-
Construct a new mesh profile string transient object.
- newRcp - Variable in class nxopen.uf.UFRoute.CreateRcpAtPortData
-
- newRcp - Variable in class nxopen.uf.UFRoute.CreateRcpByWcsOffData
-
- newRcp - Variable in class nxopen.uf.UFRoute.CreateRcpByWorkPosData
-
- newRcp - Variable in class nxopen.uf.UFRoute.CreateRcpOnRcpData
-
- newRebuildData() - Method in interface nxopen.features.MeshSurfaceBuilder
-
Allocate memory for Mesh type surface rebuild data.
- newRecord() - Method in interface nxopen.geometricanalysis.CurveAnalysisDisplay
-
- newRectangularExtreme(Unit, Direction, Direction, Direction, ScCollector, boolean) - Method in interface nxopen.MeasureManager
-
Creates an extreme rectangular point measurement from the collection of input entities.
- newRectangularExtreme(Unit, Direction, Direction, Direction, ScCollector, boolean, boolean) - Method in interface nxopen.MeasureManager
-
Creates an extreme rectangular point measurement from the collection of input entities.
- newRectangularTargetData() - Method in interface nxopen.annotations.DatumTargetCollection
-
Creates a new RectangularTargetData object
License requirements: None.
- newRegionPoint() - Method in interface nxopen.features.shipdesign.OrientationDefinitionBuilder
-
Returns the new region point or datum that will be used for the boundary of the new region.
- newRevisionId() - Method in interface nxopen.tooling.ClonePart
-
Returns the revision id in Teamcenter after renaming.
- newRoutingPathLength(Unit, NXObject[]) - Method in interface nxopen.MeasureManager
-
Creates a routing path length object for all the input objects.
- newScDistance(Unit, MeasureManager.MeasureType, ScCollector, ScCollector) - Method in interface nxopen.MeasureManager
-
Create a minimum distance measure between selection intent collections.
- newScDistance(Unit, MeasureManager.MeasureType, boolean, ScCollector, ScCollector) - Method in interface nxopen.MeasureManager
-
Create a minimum distance measure between selection intent collections.
- newScDistance(Unit, ScCollector, ScCollector, Direction, MeasureManager.ProjectionType) - Method in interface nxopen.MeasureManager
-
Create a projected, minimum clearance or maximum clearance distance measure between selection intent collections.
- newScDistance(Unit, ScCollector, ScCollector, Direction, MeasureManager.ProjectionType, boolean) - Method in interface nxopen.MeasureManager
-
Create a projected, minimum clearance or maximum clearance distance measure between selection intent collections.
- newSegment(ISegment) - Method in interface nxopen.formboard.ShapeSegmentBuilder
-
License requirements: routing_harness ("Routing Harness")
.
- newSegments - Variable in class nxopen.uf.UFRoute.SimplifySegmentsData
-
- newSensors() - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder
-
Returns a flag to indicate whether to create new sensors
License requirements: None.
- newSize() - Method in interface nxopen.weld.WeldBeadBuilder
-
Creates a nxopen.weld.WeldBeadSizeBuilder
object.
- newSmoothRange() - Method in interface nxopen.features.FlowBlendBuilder
-
The smooth range object's create function
License requirements: solid_modeling ("SOLIDS MODELING")
.
- newsplinelengths - Variable in class nxopen.routing.RouteManager.ConvertSplineSegmentsData
-
The new length of each spline segment after converting.
- newString - Variable in class nxopen.uf.UFClone.NameRuleDef
-
- newSurfaceLayer() - Method in interface nxopen.tooling.DesignTrimToolBuilder
-
Returns the layer where the new trim surface is created.
- newSymmetryPlane() - Method in interface nxopen.features.SymmetricBuilder
-
Returns the new symmetry plane.
- newTargetCurve() - Method in interface nxopen.features.GlobalShapingBuilder
-
Create a new target curve
License requirements: solid_modeling ("SOLIDS MODELING")
.
- newTargetData() - Method in interface nxopen.annotations.DatumTargetCollection
-
Creates a new DatumTargetData object
License requirements: None.
- newTargetPoint() - Method in interface nxopen.features.GlobalShapingBuilder
-
Create a new target point
License requirements: solid_modeling ("SOLIDS MODELING")
.
- NEWTON_RAPSON - Static variable in class nxopen.motion.RecurdynSolverProperty.StaticIntegratorTypes
-
Newton rapson
- newtonMotionSecondLaw(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the Newton's second law of motion.
- newTracelinkQuery() - Method in interface nxopen.pdm.RequirementUtils
-
Returns a Tracelink query object
License requirements: None.
- newTransientText() - Method in interface nxopen.Session
-
- newTranslucency() - Method in interface nxopen.DisplayModification
-
Returns a new translucency value for objects which will be modified.
- newTrimProfile() - Method in interface nxopen.die.TrimFlangeDieAssistantBuilder
-
Creates a new trim profile item in the set
License requirements: None.
- newUserDefinedClass() - Method in interface nxopen.userdefinedobjects.UserDefinedClassManager
-
Creats a new UserDefinedClass object
License requirements: None.
- newUserSymbolPreferences(UserSymbolPreferences.SizeType, double, double) - Method in interface nxopen.annotations.AnnotationManager
-
Constructs a new UserSymbolPreferences object
License requirements: None.
- newWaveQuery() - Method in interface nxopen.AssembliesUtils
-
Returns a query utility class
License requirements: None.
- newWidth() - Method in interface nxopen.DisplayModification
-
Returns a new line width for objects which will be modified
License requirements: None.
- newWindow() - Method in interface nxopen.cae.xyplot.WindowManager
-
Creates a new window and returns the device index.
- newWindowSetting() - Method in interface nxopen.cae.xyplot.Preference
-
Returns the new window setting value.
- nExceptions - Variable in class nxopen.uf.UFWeight.Exceptions
-
- nExplosions - Variable in class nxopen.uf.UFAssem.AskExplosionsData
-
- NEXT - Static variable in class nxopen.cae.Post.AnimationControl
-
- NEXT - Static variable in class nxopen.features.StudioXformBuilderEx.InsertPoleType
-
Insert pole next to the selected pole
- next() - Method in class nxopen.TaggedObjectCollection.Iterator
-
Returns the next object in the collection
- next() - Method in interface nxopen.tooling.RunSimulationBuilder
-
Next simulation result
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- next - Variable in class nxopen.uf.UFKf.ListPopData
-
- NEXT_REGION - Static variable in class nxopen.drawings.DrawingRegionBuilder.RegionContinuation
-
- NEXT_SHEET - Static variable in class nxopen.annotations.TableSectionStyleBuilder.ContinuationPropertyType
-
Next Sheet
- nextBranchID() - Method in interface nxopen.routing.BranchPathNumberingBuilder
-
Returns the formula specified in the UI to compute the next branch ID for the labeling sequence
in order to be valid, the formula must be blank OR contain the phrase "PREVIOUS_BRANCH_ID"
License requirements: routing_hvac ("Routing HVAC")
.
- nextConns - Variable in class nxopen.uf.UFRoute.GetNextConnectionsData
-
- NextInterferenceData() - Constructor for class nxopen.assemblies.ClearanceSet.NextInterferenceData
-
- nextLabel() - Method in interface nxopen.cae.SimConditionCollection
-
Returns the next available
SimCondition
label
License requirements: None.
- nextobject1 - Variable in class nxopen.assemblies.ClearanceSet.NextInterferenceData
-
the first object in the pair of the next interference
- nextobject2 - Variable in class nxopen.assemblies.ClearanceSet.NextInterferenceData
-
the second object in the pair of the next interference
- nextObjs - Variable in class nxopen.uf.UFRoute.GetNextConnectionsData
-
- nextSolution() - Method in interface nxopen.routing.PlacementSolutionsBuilder
-
Cycle to the next solution.
- nextThroughPointSolution() - Method in interface nxopen.SketchAlongPathBuilder
-
Returns the parameter indicating the location of the next solution
License requirements: None.
- nfaces - Variable in class nxopen.uf.UFModeling.AskMergedFacesData
-
- nfaces - Variable in class nxopen.uf.UFModeling.AskSplitFacesData
-
- nFaces - Variable in class nxopen.uf.UFModl.ReblendFace
-
- nFacetedModels - Variable in class nxopen.uf.UFFacet.AskModelsOfSolidData
-
- nFactor - Variable in class nxopen.uf.UFNxsm.FlangeData
-
- nFailingWoundEdges - Variable in class nxopen.uf.UFModlFeatures.CreateSimplifyData
-
- nFailingWoundEdges - Variable in class nxopen.uf.UFModlFeatures.EditSimplifyParmsData
-
- nFailingWoundEdges - Variable in class nxopen.uf.UFSf.CreateIdealizeBodyData
-
- nFailingWoundEdges - Variable in class nxopen.uf.UFSf.CreateIdealizeRegionData
-
- nFailingWoundEdges - Variable in class nxopen.uf.UFSf.EditIdealizeParmsData
-
- nFailures - Variable in class nxopen.uf.UFClone.NamingFailures
-
- nFailures - Variable in class nxopen.uf.UFWave.LoadParentsData
-
- nFeaturePatterns - Variable in class nxopen.uf.UFModeling.AskInstancesOfFeatureData
-
- nFromItems - Variable in class nxopen.uf.UFRouteRun.AskFromItemsData
-
- nGuideCurves - Variable in class nxopen.uf.UFModl.AskSweepCurvesData
-
- nhaChain - Variable in class nxopen.RuleManager.DebugInstance
-
nha of instance
- NHANES - Static variable in class nxopen.HumanData.DatabaseType
-
- nHard - Variable in class nxopen.uf.UFClear.Summary
-
- NICHOLS - Static variable in class nxopen.cae.xyplot.ComplexOption2D
-
Nichols for 2D plot
- NICHOLS - Static variable in class nxopen.cae.xyplot.ComplexOption3D
-
Nichols for 3D plot
- nImmediateComponents - Variable in class nxopen.uf.UFAssem.FindImmedOldCompsData
-
- nImprintFaces - Variable in class nxopen.uf.UFModl.ImprintFacesData
-
- nImprintFeatures - Variable in class nxopen.uf.UFModl.SimplData
-
- NINE - Static variable in class nxopen.annotations.AutomaticCenterlineBuilder.CenterlineThickness
-
Width Nine
- NINE - Static variable in class nxopen.annotations.CenterlineSettingsBuilder.CenterlineThickness
-
Width Nine
- NINE - Static variable in class nxopen.annotations.IntersectionSymbolBuilder.Thickness
-
Width Nine
- NINE - Static variable in class nxopen.annotations.LineWidth
-
Width Nine
- NINE - Static variable in class nxopen.annotations.OffsetCenterPointBuilder.Thickness
-
Width Nine
- NINE - Static variable in class nxopen.annotations.TargetPointBuilder.Thickness
-
Width Nine
- NINE - Static variable in class nxopen.cae.ModelDisplayBuilder.FreeEdgeWidth
-
- NINE - Static variable in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeWidth
-
- NINE - Static variable in class nxopen.display.GridBuilder.LineWeightType
-
- NINE - Static variable in class nxopen.DisplayableObject.ObjectWidth
-
- NINE - Static variable in class nxopen.drawings.CustomViewSettingsBuilder.Width
-
Nine
- NINE - Static variable in class nxopen.drawings.DrawingCompareSettingsBuilder.WidthType
-
Width Nine
- NINE - Static variable in class nxopen.preferences.ViewVisualizationVisual.SmoothEdgeWidth
-
- NINE - Static variable in class nxopen.preferences.Width
-
Width Nine
- NINE - Static variable in class nxopen.ViewDependentDisplayManager.Width
-
- NINTH - Static variable in class nxopen.weld.WeldGroupIdColor
-
Ninth Group Id Color Index
- nKnots - Variable in class nxopen.uf.UFEval.AskSplineKnotsData
-
- NLE_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- NLE_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- nLicenses - Variable in class nxopen.uf.UF.GetReservedLicensesData
-
- nList1 - Variable in class nxopen.uf.UFClear.Summary
-
- nList2 - Variable in class nxopen.uf.UFClear.Summary
-
- nMapItems - Variable in class nxopen.uf.UFWave.AskLinkedFeatureMapData
-
- nMemberItems - Variable in class nxopen.uf.UFRouteRun.AskMemberItemsData
-
- nMessages - Variable in class nxopen.uf.UFAssem.ConvertPrev16AlignsData
-
- nmFitMethods - Variable in class nxopen.uf.UFTabnot.CellPrefs
-
- nmifThreshold() - Method in interface nxopen.cae.PreTestExciterConfigBuilder
-
Returns the damping ratio
License requirements: None.
- nmLines - Variable in class nxopen.uf.UFDraw.TabnotEvalData
-
- nmObjects - Variable in class nxopen.uf.UFPlist.AskObjectsData
-
- nmRows - Variable in class nxopen.uf.UFPlist.AskAttachedRowsData
-
- nNonBoundaryEdges - Variable in class nxopen.uf.UFModl.SimplData
-
- NO - Static variable in class nxopen.annotations.OrdinateDoglegCreationOption
-
Dogleg will not be created
- NO - Static variable in class nxopen.annotations.SearchCriteriaDatumTargetBuilder.DatumTargetMovableOptions
-
Datum Target
- NO - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.CircleUOptions
-
have no circle U
- NO - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.FreeStateOptions
-
have no free state
- NO - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.ProjectedOptions
-
have no projected
- NO - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.StatisticalOptions
-
have no statistical
- NO - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.TangentPlaneOptions
-
have no tangent plane
- NO - Static variable in class nxopen.assemblies.AssembliesGeneralPropertiesBuilder.HiddenOptions
-
Do not hide the objects
- NO - Static variable in class nxopen.assemblies.AssembliesGeneralPropertiesBuilder.ReferenceComponentOptions
-
Objects will be non reference-only components
- NO - Static variable in class nxopen.cam.CAMSetup.PostprocessSettingsOutputWarning
-
not output the warning file
- NO - Static variable in class nxopen.cam.Inheritance
-
no inheritance
- NO - Static variable in class nxopen.cam.InspectionLinkPmiBuilder.CreatePathsOptions
-
Paths will not be created by Link PMI
- NO - Static variable in class nxopen.cam.NcmWedmBuilder.LeadOutSameAsLeadInTypes
-
not the same
- NO - Static variable in class nxopen.cam.SimulationOptionsBuilder.Enable
-
no
- NO - Static variable in class nxopen.drawings.ViewProjectedArrowSettingsBuilder.DispalyLabelType
-
- NO - Static variable in class nxopen.drawings.ViewProjectedViewSettingsBuilder.DisplayArrowOnParentViewType
-
- NO - Static variable in class nxopen.features.CompositeCurveBuilder.JoinMethod
-
No
- NO - Static variable in class nxopen.geometricutilities.CurveFitData.Join
-
No
- NO - Static variable in class nxopen.geometricutilities.CurveFitJoin.JoinMethod
-
No
- NO - Static variable in class nxopen.geometricutilities.SupportPlaneData.LockPlaneStatus
-
No Lock
- NO - Static variable in class nxopen.HumanData.ReferencePointType
-
Indicate no reference point
- NO - Static variable in class nxopen.MassPropertiesBuilder.UpdateOptions
-
The Update on Save property will be turned off for all selected objects.
- NO - Static variable in class nxopen.PartCleanup.ResetComponentDisplayAction
-
do nothing
- NO - Static variable in class nxopen.routing.DesignRuleViolationViewer.OverrideOption
-
this shows that current violation is not overridden.
- NO - Static variable in class nxopen.ViewDependentDisplayManager.PartialShading
-
- NO_ACTION - Static variable in class nxopen.mechatronics.ComparisonResult.Category
-
No Action Required
- NO_ANGLE_DATA - Static variable in class nxopen.uf.UFDraw.ProjectionAngle
-
- NO_ARROW - Static variable in class nxopen.annotations.ArrowheadType
-
- NO_ARROW - Static variable in class nxopen.uf.UFDrf.ArrowheadAndFillType
-
- NO_BOOLEAN - Static variable in class nxopen.uf.UFModl.FeatureSigns
-
- NO_BOOLEAN_UDF - Static variable in class nxopen.Selection.SelectionFeatureType
-
Select all features except boolean and udf features
- NO_BRANCH - Static variable in class nxopen.preferences.RoutingPath.ChainMethod
-
Curves must be mono-connected
- NO_CACHE - Static variable in class nxopen.uf.UFWeight.StateType
-
- NO_CHANGE - Static variable in class nxopen.cam.LaserHeadOrientation.Types
-
No Change
- NO_CHANGE - Static variable in class nxopen.cam.NcmTransferBuilder.AppDepToolAxisOptions
-
tool axis remains unchanged
- NO_CHANGE - Static variable in class nxopen.features.shipdesign.PenetrationUtils.RequestState
-
- NO_CHANGE - Static variable in class nxopen.LineFontBuilder.LineFontType
-
No Change line font
- NO_CHANGE - Static variable in class nxopen.LineWidthOption
-
Do not modify the width.
- NO_CHANGE - Static variable in class nxopen.LoadOptions.BookmarkComponents
-
This option has no effect.
- NO_CHANGE - Static variable in class nxopen.preferences.PartObject.ColorSelection
-
No Change
- NO_CHANGE - Static variable in class nxopen.uistyler.Attachment.AttachType
-
No change type
- NO_CHANGE - Static variable in class nxopen.ViewDependentDisplayManager.PartialShading
-
- NO_CHANGE - Static variable in class nxopen.ViewDependentDisplayManager.Translucency
-
- NO_CHECK - Static variable in class nxopen.assemblies.productinterface.ObjectBuilder.Mate
-
no checking for product interface objects
- NO_CHECK - Static variable in class nxopen.assemblies.productinterface.ObjectBuilder.Wave
-
no checking for product interface objects
- NO_CHECK - Static variable in class nxopen.features.shipdesign.ExamineSteelFeatureBuilderResult
-
No check
- NO_CLASH - Static variable in class nxopen.assemblies.ClearanceSet.PenetrationDepthResult
-
- NO_CON - Static variable in class nxopen.Sketch.ConstraintType
-
Used in query methods that filter by constraint type
to select any type of constraint
- NO_CON - Static variable in class nxopen.uf.UFSket.ConType
-
- NO_CONS - Static variable in class nxopen.uf.UFSket.ConClass
-
- NO_CURLING - Static variable in class nxopen.cam.BladeEdge.EdgePointType
-
no curling
- NO_CURVES_SUPPLIED - Static variable in class nxopen.uf.UFConstants
-
- NO_DCURVE - Static variable in class nxopen.uf.UFConstants
-
- NO_DELETE - Static variable in class nxopen.ObjectList.DeleteOption
-
Remove the object without deleting it
- NO_DEVIATION - Static variable in class nxopen.Measurement.DeviationReportType
-
No Deviation
- NO_DEVIATIONS - Static variable in class nxopen.geometricanalysis.DeviationChecking.DeviationOptions
-
show no
deviations
- NO_DISPLAY_SXLINE - Static variable in class nxopen.uf.UFDraw.SxlineDisplay
-
- NO_DRAFT - Static variable in class nxopen.geometricutilities.SimpleDraft.SimpleDraftType
-
No draft
- NO_DUAL_DIMENSION - Static variable in class nxopen.uf.UFDrf.DualDimensionFormat
-
- NO_EID_ERROR - Static variable in class nxopen.uf.UFConstants
-
- NO_END_CONSTRAINT - Static variable in class nxopen.features.StudioSurfaceBuilder.TransitionOptions
-
No End Constraint
- NO_ERROR - Static variable in class nxopen.FeatureProcessBuilderStatus.ResultStatus
-
All operations have been created.
- NO_ERROR - Static variable in class nxopen.uf.UFConstants
-
- NO_EXTENSION - Static variable in class nxopen.tooling.CoolingDefineChannelBuilder.ExtensionTypes
-
No extension
- NO_FACES_SUPPLIED - Static variable in class nxopen.uf.UFConstants
-
- NO_FEATURE_DATA - Static variable in class nxopen.uf.UFConstants
-
- NO_FILLER - Static variable in class nxopen.geometricutilities.AlignmentMethodBuilder.AlignFillerSurfaceType
-
No end filler surface
- NO_FILLET - Static variable in class nxopen.features.AOCSBuilder.FilletOptions
-
No fillet
- NO_FILLET - Static variable in class nxopen.uf.UFConstants
-
- NO_FLANGE - Static variable in class nxopen.features.shipdesign.SeamBlockBuilder.SeamType
-
Remove the flange
- NO_FORMAT - Static variable in class nxopen.uf.UFMotion.AnlGeometryFormat
-
- NO_GRID - Static variable in class nxopen.cae.xyplot.GridStyle
-
No grid displayed
- NO_HELP_DATA - Static variable in class nxopen.uf.UFSket.HelpType
-
- NO_INSPECTION - Static variable in class nxopen.uf.UFDrf.InspectionType
-
- NO_INTERFERENCE - Static variable in class nxopen.assemblies.ClearanceSet.InterferenceType
-
- NO_INTERFERENCE - Static variable in class nxopen.geometricanalysis.SimpleInterference.Result
-
No interference
exists between the input bodies.
- NO_ISO_V_FOR_BLENDS - Static variable in class nxopen.uf.UFConstants
-
- NO_ISSUES - Static variable in class nxopen.features.SketchConversionStatus.ReasonType
-
The linked feature curves have been converted with no issues
- NO_JOIN - Static variable in class nxopen.uf.UFCurve.JoinTypes
-
- NO_LEADER - Static variable in class nxopen.annotations.NarrowDisplayOption
-
Displays narrow dimension without leader
- NO_LICENSE - Static variable in class nxopen.RuleManager.LicenseType
-
- NO_LINE_TYPE - Static variable in class nxopen.uf.UFDrf.ObjectAssocLineType
-
- NO_LOOP_EXISTED - Static variable in class nxopen.tooling.EdgePatchBuilder.PatchStatus
-
No loop existed in list
- NO_MARKER - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- NO_MARKER - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- NO_MIN_DIST - Static variable in class nxopen.uf.UFConstants
-
- NO_MOD - Static variable in class nxopen.uf.UFGdt.MaterialModifier
-
- NO_MODIFIERS - Static variable in class nxopen.uf.UFGdt.ModifierTypes
-
- NO_OBJECT_OR_EMPTY_LIST - Static variable in class nxopen.uf.UFConstants
-
- NO_OBJECTS_COPIED - Static variable in class nxopen.gateway.CopyCutBuilder.Status
-
No objects were successfully copied
- NO_OFFSET - Static variable in class nxopen.features.shipdesign.StiffenerBuilder.MountingMethods
-
No mounting offset
- NO_OFFSET - Static variable in class nxopen.features.shipdesign.StiffenerSystemBuilder.MountingMethods
-
No mounting offset
- NO_OFFSET - Static variable in class nxopen.features.vehicledesign.CloseRangeVisibilityBuilder.EyePointOffsetTypes
-
No offset
- NO_OFFSET - Static variable in class nxopen.features.WrapGeometryBuilder.CloseGapType
-
- NO_OFFSET - Static variable in class nxopen.geometricutilities.Type
-
No offset
- NO_OFFSET - Static variable in class nxopen.sim.SinumerikCaSimplifyBodiesBuilder.CloseGapTypes
-
No Offset
- NO_OPERATIONS_CREATED - Static variable in class nxopen.FeatureProcessBuilderStatus.ResultStatus
-
No operations have been created.
- NO_OPTION - Static variable in class nxopen.Update.FailureOption
-
No option
- NO_PARENT - Static variable in class nxopen.tooling.GeneralInsertBuilder.ParentOption
-
- NO_PARENT - Static variable in class nxopen.tooling.ShimBuilder.ParentOption
-
- NO_PATTERN - Static variable in class nxopen.uf.UFGdt.PatternType
-
- NO_PERFECT_MMC_FORM - Static variable in class nxopen.uf.UFGdt.ModifierTypes
-
- NO_POINT - Static variable in class nxopen.cam.NcmAvoidancePointBuilder.PointStates
-
use no point (only for GoHome point)
- NO_POINT - Static variable in class nxopen.features.DatumAxisBuilder.UseArcLength
-
All points use percentage of arclength
- NO_POINT - Static variable in class nxopen.features.DatumPlaneBuilder.UseArcLength
-
All points use percentage of arclength
- NO_POINT_TYPE - Static variable in class nxopen.uf.UFDrf.ObjectAssocPointType
-
- NO_REASON - Static variable in class nxopen.assemblies.ClearanceAnalysisBuilder.PairExcludedReason
-
default behavior
- NO_REASON - Static variable in class nxopen.uistyler.StylerEvent.Reason
-
No reason
- NO_REFERENCE_SYMBOL - Static variable in class nxopen.uf.UFDrf.ReferenceSymbolType
-
- NO_RESULT - Static variable in class nxopen.features.shipdesign.ExamineSteelFeatureBuilderResult
-
Check but can't find check items
- NO_RESULTS - Static variable in class nxopen.assemblies.ClearanceSet.CopyMode
-
- NO_ROUNDING - Static variable in class nxopen.cam.RoundPointBuilder.Output
-
No Rounding
- NO_RPO_CONSTRAINTS - Static variable in class nxopen.uf.UFConstants
-
- NO_SELECTION_FILTER - Static variable in class nxopen.cam.Preferences.SelectionTypes
-
no selection filter
- NO_SIZE - Static variable in class nxopen.uf.UFGdt.SizeValueType
-
- NO_STAGGERED_SYMBOL - Static variable in class nxopen.annotations.LineWeldBuilder.StaggeredWeldType
-
- NO_STANDARD - Static variable in class nxopen.annotations.DatumTargetBuilder.StandardTypes
-
NO_STANDARD
- NO_STANDARD - Static variable in class nxopen.uf.UFGdt.Standard
-
- NO_STEP - Static variable in class nxopen.HumanData.InverseKinematicsBalanceType
-
Indicate human foot is fixate without step
- NO_STUB - Static variable in class nxopen.uf.UFDrf.LeaderOrientation
-
- NO_SUB_INDEX - Static variable in class nxopen.uistyler.DialogIndex
-
All sub items are selected.
- NO_SUB_INDEX - Static variable in class nxopen.uistyler.StylerEvent.Miscellaneous
-
No sub index
- NO_SURFACE - Static variable in class nxopen.die.AddendumSectionBuilder.SurfaceBuildType
-
Do not create a surface.
- NO_TAIL - Static variable in class nxopen.annotations.LineWeldBuilder.TailType
-
- NO_TEXT - Static variable in class nxopen.annotations.OrdinateOriginDisplayOption
-
Display no text at the ordinate origin
- NO_TEXT_ABOVE_LEADER - Static variable in class nxopen.uf.UFDrf.TextAboveLeader
-
- NO_TOLERANCE - Static variable in class nxopen.annotations.SearchCriteriaDimensionBuilder.ToleranceTypes
-
NoTolerance
- NO_TOLERANCE - Static variable in class nxopen.annotations.SearchCriteriaSurfaceFinishBuilder.ToleranceTypeOptions
-
no tolerance
- NO_TOLERANCE - Static variable in class nxopen.tooling.AutoDimensionBuilder.ToleranceType
-
- NO_TOLERANCE - Static variable in class nxopen.uf.UFDrf.ToleranceType
-
- NO_TOLERANCE - Static variable in class nxopen.uf.UFGdt.TolFormat
-
- NO_TRIM - Static variable in class nxopen.features.StyledBlendBuilder.StyledBlendTrimMethodType
-
Non-trim
- NO_TRIM - Static variable in class nxopen.features.StyledCornerBuilder.TrimAndSewMethodTypes
-
No trim
- NO_TRIM - Static variable in class nxopen.uf.UFModl.TrimBlendOptions
-
- NO_TRIM_AND_ATTACH - Static variable in class nxopen.uf.UFModl.TrimBlendOptions
-
- NO_TYPE - Static variable in class nxopen.motion.MotionEnvironment.Analysis
-
No analysis type
- NO_UNDO_MARK - Static variable in class nxopen.uf.UFConstants
-
- NO_VALIDATION - Static variable in class nxopen.uf.UFClone.ValidationMode
-
- NO_VALUE - Static variable in class nxopen.uf.UFKf.Type
-
- NO_VALUE - Static variable in class nxopen.uistyler.StylerEvent.Indicator
-
No value
- NO_VERTEX - Static variable in class nxopen.uf.UFSket.GeomVertex
-
- NO_VIEW_COMMANDS - Static variable in class nxopen.drawings.GeneralWorkFlowBuilder.ModelBasedAlwaysStartType
-
- NO_WELDS_NEAR_BODIES - Static variable in class nxopen.weld.AutoPointBuilder.InterferenceDetails
-
Indicates no existing weld points are in this interference area
- nObjects - Variable in class nxopen.uf.UFWave.AskOutOfDateObjectsData
-
- nObjectsInEachSet - Variable in class nxopen.uf.UFProcessAid.AskDatumObjectsData
-
- nocoreStock() - Method in interface nxopen.cam.WedmNocoreGeomBuilder
-
Returns the Nocore Stock
License requirements: cam_base ("CAM BASE")
.
- nocoreStockBuilder() - Method in interface nxopen.cam.WedmGeomBuilder
-
Returns the nocore_stock builder
License requirements: cam_base ("CAM BASE")
.
- nocoreStockBuilder() - Method in interface nxopen.cam.WedmOperationBuilder
-
Returns the nocore_stock builder
License requirements: cam_base ("CAM BASE")
.
- NODAL - Static variable in class nxopen.cae.responsesimulation.CoordinateSystem
-
- NODAL - Static variable in class nxopen.cae.Result.Location
-
- NODAL - Static variable in class nxopen.cae.ResultVariable.NodalCombination
-
- NODAL - Static variable in class nxopen.cae.SimLoadRecipeMapping.OrientationTypes
-
- NODAL_CS - Static variable in class nxopen.cae.responsesimulation.SensorCoordinateType
-
- NODAL_FORCE - Static variable in class nxopen.cae.responsesimulation.ExcitationBuilder.ExcitationLocationType
-
- NODAL_FORCE - Static variable in class nxopen.cae.responsesimulation.NodalFunctionExcitation.Type
-
- NODAL_UNI_AXIAL - Static variable in class nxopen.cae.DurabilityStressAxesBuilder.StressAxisMethodEnum
-
Nodal Uni Axial
- nodalAveraging() - Method in interface nxopen.cae.ResultProbeBuilder
-
Returns the nodal combinatione
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- NodalAveragingOption - Class in nxopen.cae.responsesimulation
-
Specifies nodal averaging options
- nodalCombinationValue() - Method in interface nxopen.cae.PostGraphBuilder
-
Returns the nodal combination option for determining the nodal value for element and element-nodal results
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- nodalcombinetype() - Method in interface nxopen.cae.ResultVariable
-
Returns the Nodal Combination
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- NodalFunctionEvalBeamLocation - Class in nxopen.cae.responsesimulation
-
Specifies beam element evaluation locations for nodal function evaluation
- NodalFunctionEvalRequest - Class in nxopen.cae.responsesimulation
-
Specifies response request for nodal function evaluation
- NodalFunctionEvalShellLocation - Class in nxopen.cae.responsesimulation
-
Specifies shell element evaluation locations for nodal function evaluation
- NodalFunctionEvaluationSetting - Interface in nxopen.cae.responsesimulation
-
Represents the parameters setting of nodal function response evaluation.
- NodalFunctionEvaluationSettingBuilder - Interface in nxopen.cae.responsesimulation
-
- NodalFunctionExcitation - Interface in nxopen.cae.responsesimulation
-
Represents the abstract class of nodal function excitation
This is an abstract class, and cannot be created.
- NodalFunctionExcitation.Type - Class in nxopen.cae.responsesimulation
-
the subtype of nodal function excitation
- NodalFunctionExcitationBuilder - Interface in nxopen.cae.responsesimulation
-
- noDataOption() - Method in interface nxopen.cae.PostGraphBuilder
-
Returns the error handling option when result is not present on selected entities or path
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- noDataTreatment - Variable in class nxopen.cae.Post.GraphParameters
-
- noDataTreatment - Variable in class nxopen.cae.Post.StreamlineData
-
- noDataValue - Variable in class nxopen.cae.Post.GraphParameters
-
- noDataValue - Variable in class nxopen.cae.Post.StreamlineData
-
- node() - Method in interface nxopen.cae.BeamEADBuilder
-
Returns the get node operator selects an orientation node
License requirements: nx_masterfem ("Finite Element Modeling")
.
- NODE - Static variable in class nxopen.cae.BeamEADBuilder.OrientationMethod
-
use a node to orient the element
- node() - Method in interface nxopen.cae.BeamSectionOrientationOptions
-
Returns the node used to orient beam.
- NODE - Static variable in class nxopen.cae.BushingEADBuilder.OrientationMethod
-
use a node to orient the element
- NODE - Static variable in class nxopen.cae.CaeSetGroupFilterType
-
filter type is node
- node() - Method in interface nxopen.cae.ElementCreateBuilder
-
Returns the selected node
License requirements: None.
- NODE - Static variable in class nxopen.cae.GapEADBuilder.OrientationMethod
-
use a node to orient the element
- node() - Method in interface nxopen.cae.NodeAlignBuilder
-
Returns the node
License requirements: None.
- node() - Method in interface nxopen.cae.NodeDeleteBuilder
-
Returns the node
License requirements: None.
- node() - Method in interface nxopen.cae.NodeDissociationBuilder
-
Returns the node
License requirements: None.
- NODE - Static variable in class nxopen.cae.NodeElementInfoBuilder.EntityType
-
Info on node
- node() - Method in interface nxopen.cae.NodeElementInfoBuilder
-
Returns the selected node
License requirements: None.
- node() - Method in interface nxopen.cae.NodeModifyLabelBuilder
-
Returns the node
License requirements: None.
- node() - Method in interface nxopen.cae.NodeReflectBuilder
-
Returns the node
License requirements: None.
- node() - Method in interface nxopen.cae.NodeRotateBuilder
-
Returns the node
License requirements: None.
- node() - Method in interface nxopen.cae.NodesBetweenNodesBuilder
-
Returns the node
License requirements: None.
- node() - Method in interface nxopen.cae.NodeTranslateBuilder
-
Returns the node
License requirements: None.
- NODE - Static variable in class nxopen.cae.optimization.TBSGroupDefinition.GroupElementType
-
The group contains node
- NODE - Static variable in class nxopen.cae.PostGraphBuilder.EntityType
-
- NODE - Static variable in class nxopen.cae.responsesimulation.StrainGagePlacementType
-
- node() - Method in interface nxopen.cae.ShellEADBuilder
-
Returns the select nodes operator selects nodes to limit thickness to
License requirements: nx_masterfem ("Finite Element Modeling")
.
- NODE - Static variable in class nxopen.cae.SimLoadRecipeMapEntryTargetTypes.TargetTypes
-
- NODE - Static variable in class nxopen.cae.ThicknessBuilder.EntityType
-
Info on node
- node() - Method in interface nxopen.cae.ThicknessBuilder
-
Returns the selected node
License requirements: None.
- NODE - Static variable in class nxopen.cae.WeldBuilder.WeldLocation
-
Creates a weld at locations specified using nodes
- NODE_AND_ELEMENT - Static variable in class nxopen.cae.CaeSetGroupFilterType
-
filter type is any node and element
- NODE_AT_CENTER_OF_THREE_NODES - Static variable in class nxopen.cae.NodesBetweenNodesBuilder.TypeEnum
-
At the center of imaginary circle defined by 3 nodes
- NODE_BODYINTERIOR - Static variable in class nxopen.uf.UFSf.NodeBtype
-
- NODE_CORNER - Static variable in class nxopen.uf.UFSf.MidNodeType
-
- NODE_DISABLED - Static variable in class nxopen.uf.UFSf.MidNodeType
-
- NODE_DOF - Static variable in class nxopen.cae.Result.LoadcaseValueType
-
Value type - Node DOF
- NODE_EDGE - Static variable in class nxopen.uf.UFSf.NodeBtype
-
- NODE_FACEINTERIOR - Static variable in class nxopen.uf.UFSf.NodeBtype
-
- NODE_GROUP - Static variable in class nxopen.cae.SimLoadRecipeMapEntryTargetTypes.TargetTypes
-
- NODE_INTERIOR - Static variable in class nxopen.uf.UFSf.NodeBtype
-
- NODE_MESH - Static variable in class nxopen.cae.SimLoadRecipeMapEntryTargetTypes.TargetTypes
-
- NODE_MID - Static variable in class nxopen.uf.UFSf.MidNodeType
-
- NODE_NO_GEOMETRY - Static variable in class nxopen.uf.UFSf.NodeBtype
-
- NODE_ON_ELEMENT - Static variable in class nxopen.cae.responsesimulation.StrengthStressOption
-
- NODE_ORIENTATION - Static variable in class nxopen.uf.UFSf.MidNodeType
-
- NODE_POINT - Static variable in class nxopen.uf.UFSf.NodeBtype
-
- NODE_TO_EDGE - Static variable in class nxopen.cae.ManualMorphBuilder.MapType
-
node to edge mapping
- NODE_TO_FACE - Static variable in class nxopen.cae.ManualMorphBuilder.MapType
-
node to face mapping
- NODE_TO_POINT - Static variable in class nxopen.cae.ManualMorphBuilder.MapType
-
node to point mapping
- NodeAlignBuilder - Interface in nxopen.cae
-
- NodeAssociationBuilder - Interface in nxopen.cae
-
- nodeAssoErrorList - Variable in class nxopen.uf.UFSf.MeshErrorContainer
-
- nodeColor() - Method in interface nxopen.cae.ModelDisplayBuilder
-
Returns the node color
License requirements: nx_masterfem ("Finite Element Modeling")
.
- nodeConnectivity() - Method in interface nxopen.cae.NodeElementInfoBuilder
-
Returns the node connectivity
License requirements: None.
- nodeCoords - Variable in class nxopen.uf.UFSf.DispMesh
-
- NodeCreateBuilder - Interface in nxopen.cae
-
- NodeDeleteBuilder - Interface in nxopen.cae
-
- nodeDisplayMode() - Method in interface nxopen.cae.ModelDisplayBuilder
-
Returns the node display mode type
License requirements: nx_masterfem ("Finite Element Modeling")
.
- NodeDissociationBuilder - Interface in nxopen.cae
-
- NodeElementInfoBuilder - Interface in nxopen.cae
-
- NodeElementInfoBuilder.EntityType - Class in nxopen.cae
-
Option to Info on Node or Element
- NodeElementInfoBuilder.FormatType - Class in nxopen.cae
-
Output format option
- NodeElementInfoBuilder.PropertyType - Class in nxopen.cae
-
Element property option
- NodeElementInfoManager - Interface in nxopen.cae
-
Provides method for creating builder for
node element info operation commands in both sim and fem part
To obtain an instance of this class, refer to
CaePart
Created in NX5.0.0
- nodeElementInfoMgr() - Method in interface nxopen.cae.CaePart
-
Returns the node element info manager belonging to this IFem .
- NodeElementManager - Interface in nxopen.cae
-
Provides method for creating builder for
node element operation commands in a fem part
To obtain an instance of this class, refer to
BaseFEModel
Created in NX5.0.0
- nodeElementMgr() - Method in interface nxopen.cae.BaseFEModel
-
Returns the node element manager belonging to this fem part .
- nodeElementOption() - Method in interface nxopen.cae.DurabilityStressAxesBuilder
-
Returns the node element option.
- nodeId() - Method in interface nxopen.motion.MarkerToNodeData
-
Returns the node id
License requirements: mechanisms ("MECHANISMS")
.
- nodeId - Variable in class nxopen.uf.UFSf.AskNodeData
-
- nodeIdDisplayFlag() - Method in interface nxopen.cae.CaeDOFSetDisplay
-
Returns the true/false flag based on whether the node id of the DOF Set is
displayed in the graphics window
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- nodeIdDisplayFlag() - Method in interface nxopen.cae.SimBCDisplay
-
Returns the true/false flag based on whether the node id of the BC is
displayed in the graphics window
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- nodeidentifications - Variable in class nxopen.bodydes.OnestepUnformBuilder.NodeIdsOnFreeEdgeData
-
- nodeIdOffset - Variable in class nxopen.cae.FEModel.IdSpecificationObject
-
If true node_start_id will be used as an offset for imported node ids
- nodeIds - Variable in class nxopen.uf.UFSf.DispMesh
-
- NodeIdsOnFreeEdgeData() - Constructor for class nxopen.bodydes.OnestepUnformBuilder.NodeIdsOnFreeEdgeData
-
- nodeindex - Variable in class nxopen.cae.ResultAccess.AskElementNodalResultAllComponentsData
-
- nodelabels - Variable in class nxopen.cae.ResultAccess.AskElementNodalResultData
-
index of nodes that forms the element
- nodeList() - Method in interface nxopen.geometricutilities.MultiTransitionLawBuilder
-
Returns the list of law nodes.
- nodeMapSizeLimit() - Method in interface nxopen.cae.CorrelSolutionBuilder
-
Returns the node map size limit
License requirements: None.
- nodeMapSizeLimitActive() - Method in interface nxopen.cae.CorrelSolutionBuilder
-
Returns the high-frequency filtering option for work modes
License requirements: None.
- nodeMarker() - Method in interface nxopen.cae.ModelDisplayBuilder
-
Returns the node marker display symbol type
License requirements: nx_masterfem ("Finite Element Modeling")
.
- nodeMatchingDistance() - Method in interface nxopen.cae.CorrelSolutionBuilder
-
Returns the node-matching distance
License requirements: None.
- nodeMergeOption() - Method in interface nxopen.cae.SolverAppendOption
-
Returns the node merge choice
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- nodeMeshShowHideOption() - Method in interface nxopen.cae.ModelDisplayBuilder
-
Returns the nodes to include for meshes in the show and hide commands
License requirements: nx_masterfem ("Finite Element Modeling")
.
- NodeModifyLabelBuilder - Interface in nxopen.cae
-
- NodeModifyLabelBuilder.LabelType - Class in nxopen.cae
-
the label types
- nodeName - Variable in class nxopen.uf.UF.SystemInfo
-
- nodeOffset - Variable in class nxopen.cae.FEModelOccurrence.LabelOffsetsData
-
node offset
- nodeOffset() - Method in interface nxopen.cae.SolverAppendOption
-
Returns the node offset
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- NodeProjectBuilder - Interface in nxopen.cae
-
- NodeProjectBuilder.LabelType - Class in nxopen.cae
-
Option to use label/increment or offset
- NodeProjectBuilder.NodeProjectTypes - Class in nxopen.cae
-
Represents the node project types
- NodeProjectBuilder.ProjectionMethodType - Class in nxopen.cae
-
Represents Projection Method
- NodeReflectBuilder - Interface in nxopen.cae
-
- NodeReflectBuilder.CopyType - Class in nxopen.cae
-
the copy types
- NodeReflectBuilder.LabelType - Class in nxopen.cae
-
the label types
- NodeRotateBuilder - Interface in nxopen.cae
-
- NodeRotateBuilder.CopyType - Class in nxopen.cae
-
the copy types
- NodeRotateBuilder.DistanceType - Class in nxopen.cae
-
the distance types
- NodeRotateBuilder.LabelType - Class in nxopen.cae
-
the label types
- nodes() - Method in interface nxopen.cae.NodeProjectBuilder
-
Returns the selected nodes to be extruded
License requirements: None.
- NODES - Static variable in class nxopen.cae.Post.MarkLocation
-
- nodes() - Method in interface nxopen.cae.PreTestDofSetBuilder
-
Returns the selected nodes
License requirements: nx_correl_base ("FE Correlation")
.
- NODES - Static variable in class nxopen.cae.ResultProbeBuilder.SelectionType
-
- NODES_BETWEEN_TWO_NODES - Static variable in class nxopen.cae.NodesBetweenNodesBuilder.TypeEnum
-
Between two nodes
- NodesBetweenNodesBuilder - Interface in nxopen.cae
-
- NodesBetweenNodesBuilder.TypeEnum - Class in nxopen.cae
-
the method of creation of node
- nodesCnt - Variable in class nxopen.uf.UFSf.LocateNodesOnGeometryData
-
- nodeSelectInternal() - Method in interface nxopen.cae.ModelDisplayBuilder
-
Returns the node select internal switch
License requirements: nx_masterfem ("Finite Element Modeling")
.
- nodeSelection() - Method in interface nxopen.cae.ManualNodeAssociationBuilder
-
Returns the selected mesh
License requirements: None.
- nodeSelection() - Method in interface nxopen.cae.WeldBuilder
-
Returns the node(s) used to specify the location of the weld
License requirements: None.
- nodesEnabled() - Method in interface nxopen.cae.PreTestDofSetBuilder
-
Returns the manual selection toggle value
License requirements: nx_correl_base ("FE Correlation")
.
- nodesList - Variable in class nxopen.uf.UFSf.LocateNodesOnGeometryData
-
- NodesOnCurveBuilder - Interface in nxopen.cae
-
- NodesOnCurveBuilder.PlacementType - Class in nxopen.cae
-
the placement type types
- NodesRepositionBuilder - Interface in nxopen.cae
-
- nodeStartId - Variable in class nxopen.cae.FEModel.IdSpecificationObject
-
Start id to use for imported nodes
- nodeString() - Method in interface nxopen.annotations.SymbolCatalogBuilder
-
Returns the node string of the fastener symbol,
NOTE: Client must free the returned TEXT_p_t* with TEXT_free
License requirements: None.
- nodeTagsP - Variable in class nxopen.uf.UFSf.LocateNodeByIdData
-
- nodeTagsP - Variable in class nxopen.uf.UFSf.LocateNodesOnElementData
-
- nodeTagsP - Variable in class nxopen.uf.UFSf.LocateNodesOnMeshData
-
- NodeThicknessData() - Constructor for class nxopen.cae.ThicknessBuilder.NodeThicknessData
-
- nodeTolerance() - Method in interface nxopen.cae.BoltBuilder
-
Returns the option to tune node tolerance for a model.
- nodeTolerance() - Method in interface nxopen.features.RapidSurfaceBuilder
-
Returns the node tolerance
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- NodeTranslateBuilder - Interface in nxopen.cae
-
- NodeTranslateBuilder.CopyType - Class in nxopen.cae
-
the copy types
- NodeTranslateBuilder.DistanceType - Class in nxopen.cae
-
the distance types
- NodeTranslateBuilder.LabelType - Class in nxopen.cae
-
the label types
- NodeTranslateBuilder.MethodType - Class in nxopen.cae
-
the method types
- nodeType - Variable in class nxopen.uf.UFSmd.PipNodeData
-
- nodeUnattachedMarker() - Method in interface nxopen.cae.ModelDisplayBuilder
-
Returns the unattached node marker display symbol type
License requirements: nx_masterfem ("Finite Element Modeling")
.
- nodeUniqueTol - Variable in class nxopen.uf.UFSf.Sf1dMeshData
-
- nOffsetFaces - Variable in class nxopen.uf.UFModlFeatures.AskHollowData
-
- noimagebmpname - Variable in class nxopen.uf.UFModl.ShapePatternClientDialogData
-
- noInteractionQueriesToggle() - Method in interface nxopen.tooling.MWDefineSheetsBuilder
-
Returns the "No Interaction Queries" toggle indicates that user interactions are not required
so as to turn off user interactions during Journamation playback
License requirements: None.
- NOMINAL - Static variable in class nxopen.cam.BoundaryTurnMemberFineFinishOffset.TypeValue
-
- NOMINAL - Static variable in class nxopen.cam.BoundaryTurnMemberOffset.DistanceTypeMode
-
- NOMINAL - Static variable in class nxopen.cam.InspectionAlignmentBuilder.SaveStates
-
Save Nominal PCS
- NOMINAL_FEATURE - Static variable in class nxopen.cam.InspectionAlignmentBuilder.RotateTableMethods
-
Rotate table by nominal feature
- NOMINAL_FEATURE - Static variable in class nxopen.cam.InspectionAlignmentBuilder.RotationMethods
-
Rotate by Nominal Feature
- NOMINAL_FEATURE - Static variable in class nxopen.cam.InspectionAlignmentBuilder.XtMethods
-
Translate by Nominal Feature
- NOMINAL_FEATURE - Static variable in class nxopen.cam.InspectionAlignmentBuilder.YtMethods
-
Translate by Nominal Feature
- NOMINAL_FEATURE - Static variable in class nxopen.cam.InspectionAlignmentBuilder.ZtMethods
-
Translate by Nominal Feature
- NOMINAL_MINUS_X - Static variable in class nxopen.tooling.AutoDimensionBuilder.ValuePrecisionType
-
- NOMINAL_MINUS_XDOTX - Static variable in class nxopen.tooling.AutoDimensionBuilder.ValuePrecisionType
-
- NOMINAL_MINUS_XDOTXX - Static variable in class nxopen.tooling.AutoDimensionBuilder.ValuePrecisionType
-
- NOMINAL_MINUS_XDOTXXX - Static variable in class nxopen.tooling.AutoDimensionBuilder.ValuePrecisionType
-
- NOMINAL_MINUS_XDOTXXXX - Static variable in class nxopen.tooling.AutoDimensionBuilder.ValuePrecisionType
-
- NOMINAL_MINUS_XDOTXXXXX - Static variable in class nxopen.tooling.AutoDimensionBuilder.ValuePrecisionType
-
- NOMINAL_MINUS_XDOTXXXXXX - Static variable in class nxopen.tooling.AutoDimensionBuilder.ValuePrecisionType
-
- nominalDecimalPlaces() - Method in interface nxopen.annotations.Dimension
-
Returns a setting to control the number of decimal places for the nominal value of a dimension.
- nominalDepthPerCut() - Method in interface nxopen.cam.FeedsOptimizationData
-
Returns the nominal depth per cut
License requirements: None.
- nominalDMS() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the string for anglb nominal DMS
License requirements: None.
- nominalFlushness() - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder
-
Returns the nominal value for flushness
License requirements: solid_modeling ("SOLIDS MODELING")
.
- nominalFormat - Variable in class nxopen.uf.UFDrf.AskAngObjUnitsFormatData
-
- nominalGap() - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder
-
Returns the nominal value for gap
License requirements: solid_modeling ("SOLIDS MODELING")
.
- nominalLeadAngle() - Method in interface nxopen.cam.ToolAxisVariable
-
Returns the Nominal Lead Angle
License requirements: None.
- nominalLeadAngleType() - Method in interface nxopen.cam.ToolAxisVariable
-
Returns the Nominal Lead Angle type
License requirements: None.
- nominaloffset - Variable in class nxopen.uf.UFCamgeom.AppData
-
- nominalSource() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the Nominal Value Source
License requirements: None.
- nominalStepover() - Method in interface nxopen.cam.FeedsOptimizationData
-
Returns the nominal stepover
License requirements: None.
- nominalValue - Variable in class nxopen.uf.UFGdt.DepthTolerance
-
- nominalVoltage() - Method in interface nxopen.motion.PMDCMotorBuilder
-
- nominalVoltageExpression() - Method in interface nxopen.motion.PMDCMotorBuilder
-
Returns the Nominal Voltage Expression
License requirements: nx_motion_motor ("NX Motion Motor")
.
- noModelDisplayOnPostviewCreation() - Method in interface nxopen.preferences.PostProcessing
-
Returns the flag which indicates that no finite element model data will displayed when postviews are created
License requirements: None.
- NON_ASSOCIATIVE - Static variable in class nxopen.assemblies.ComponentAssembly.SubstitutionMode
-
The old component is deleted, and the new one is added
- NON_ASSOCIATIVE - Static variable in class nxopen.preferences.GeneralExtractedEdgesOption
-
Non-Associative
- NON_BODY_EID - Static variable in class nxopen.uf.UFConstants
-
- NON_CIRCULAR - Static variable in class nxopen.tooling.BurringInsertBuilder.CircularOrNonCircularType
-
- NON_CREATION - Static variable in class nxopen.weld.WeldOverlapStatus
-
don't create overlap
- NON_CYCLIC - Static variable in class nxopen.mechatronics.CamProfileBuilder.ProfileCyclicType
-
Non-cyclic Cam Profiles are defined only in
the defined master axis range.
- NON_CYCLIC - Static variable in class nxopen.mechatronics.MotionProfileBuilder.ProfileCyclicType
-
Non-cyclic
- NON_EDGE_EID - Static variable in class nxopen.uf.UFConstants
-
- NON_EXACT_MIRROR_DELETE_BROKEN_LINKS - Static variable in class nxopen.LinkedMirrorPartBuilder.MirrorPartTypeOption
-
- NON_EXACT_MIRROR_KEEP_BROKEN_LINKS - Static variable in class nxopen.LinkedMirrorPartBuilder.MirrorPartTypeOption
-
- NON_EXISTENT_EID - Static variable in class nxopen.uf.UFConstants
-
- NON_EXISTENT_SKETCH - Static variable in class nxopen.uf.UFConstants
-
- NON_EXPORTABLE_OBJECTS - Static variable in class nxopen.gateway.CopyCutBuilder.Status
-
Certain non-exportable objects were not copied
- NON_FACE_EID - Static variable in class nxopen.uf.UFConstants
-
- NON_GEOM - Static variable in class nxopen.assemblies.ClearanceAnalysisBuilder.PairExcludedReason
-
no geometry
- NON_INFLECTING - Static variable in class nxopen.geometricutilities.LawBuilder.Type
-
non-inflecting law type
- NON_MANDATORY_MFG_DATA - Static variable in class nxopen.uf.UFGdt.ModifierTypes
-
- NON_MASTER - Static variable in class nxopen.tooling.CompDrawingBuilder.DrawingType
-
with non-master drawing
- NON_ORTHO - Static variable in class nxopen.drawings.ViewProjectedViewSettingsBuilder.DisplayArrowOnParentViewType
-
- NON_PLANAR_CURVE - Static variable in class nxopen.uf.UFConstants
-
- NON_PLANAR_CURVE_TYPE - Static variable in class nxopen.features.sheetmetal.NormalCutoutBuilder.TypeOptions
-
3D curves type normal cutout
- NON_SECTIONED - Static variable in class nxopen.uf.UFDraw.CompSectionInView
-
- NON_SEQUENTIAL_PROCESS - Static variable in class nxopen.uf.UFSmd.PipSequentialE
-
- NON_STANDARD - Static variable in class nxopen.features.shipdesign.PenetrationRequest.CompensationType
-
- NON_STANDARD - Static variable in class nxopen.LayoutDefinition.ArrangementType
-
A non standard layout.
- NON_STANDARD_VALUE - Static variable in class nxopen.tooling.SpreadsheetDataParameter.Status
-
The current value of this parameter is user's input, not from spreadsheet
- NON_STEEP - Static variable in class nxopen.cam.CutRegionsBuilder.CutRegionsContainmentTypes
-
Non-steep
- NON_STEEP - Static variable in class nxopen.cam.EditSubopCommand.ContainmentTypes
-
Non-steep
- NON_STEEP - Static variable in class nxopen.cam.SurfaceRegions.CreateRegionsTypes
-
non-steep
- NON_STEEP_NON_DIRECTIONAL - Static variable in class nxopen.cam.DmAmBuilder.SteepOptTypes
-
- NON_TIGHT - Static variable in class nxopen.features.shipdesign.PlateBuilder.TightnessOptions
-
- NON_UNIFORM_SCALE - Static variable in class nxopen.SketchConstraintBuilder.Constraint
-
- NON_UNIFORM_SCALED - Static variable in class nxopen.Sketch.ConstraintType
-
- NON_UNIFORM_SCALED - Static variable in class nxopen.uf.UFSket.ConType
-
- NON_UNIQUE_CURVES - Static variable in class nxopen.uf.UFConstants
-
- nonAssociativeBoolean - Variable in class nxopen.features.FeatureCollection.CreateIntersectFeatureData
-
True if operation resulted in a non-associative boolean.
- nonAssociativeBoolean - Variable in class nxopen.features.FeatureCollection.CreateSubtractFeatureData
-
True if operation resulted in a non-associative boolean.
- nonAssociativeBoolean - Variable in class nxopen.features.FeatureCollection.CreateUniteFeatureData
-
True if operation resulted in a non-associative boolean.
- nonBlendFaces - Variable in class nxopen.uf.UFModlFeatures.AskReplaceFaceData
-
- nonBlendFaces - Variable in class nxopen.uf.UFModlFeatures.AskResizeFaceData
-
- nonBoundaryEdges - Variable in class nxopen.uf.UFModl.SimplData
-
- nonCliffEdges() - Method in interface nxopen.features.EdgeBlendBuilder
-
Returns the prohibited cliff edges for edge blend
License requirements: None.
- nonCuttingBuilder() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
-
Returns the non-cutting builder
License requirements: None.
- nonCuttingBuilder() - Method in interface nxopen.cam.FinishTurningBuilder
-
Returns the non-cutting builder
License requirements: None.
- nonCuttingBuilder() - Method in interface nxopen.cam.HoleMachiningBuilder
-
Returns the non-cutting moves builder
License requirements: None.
- nonCuttingBuilder() - Method in interface nxopen.cam.PlanarOperationBuilder
-
Returns the non-cutting moves builder
License requirements: None.
- nonCuttingBuilder() - Method in interface nxopen.cam.RoughTurningBuilder
-
Returns the non-cutting builder
License requirements: None.
- nonCuttingBuilder() - Method in interface nxopen.cam.SurfaceContourBuilder
-
Returns the non-cutting moves builder
License requirements: None.
- nonCuttingBuilder() - Method in interface nxopen.cam.TeachmodeTurningBuilder
-
Returns the non cutting builder
License requirements: None.
- nonCuttingBuilder() - Method in interface nxopen.cam.ThreadTurningBuilder
-
Returns the non-cutting builder
License requirements: None.
- NONE - Static variable in class nxopen.annotations.AngularSuppressZeros
-
Specifies no zeros suppressed
- NONE - Static variable in class nxopen.annotations.ArrowDisplay
-
Doesn't display arrows
- NONE - Static variable in class nxopen.annotations.AssociativityLineOption
-
No line
- NONE - Static variable in class nxopen.annotations.AssociativityPointOption
-
No point
- NONE - Static variable in class nxopen.annotations.BaseSurfaceFinishBuilder.ParanthesesType
-
Deprecated.
None
- NONE - Static variable in class nxopen.annotations.BaseSurfaceFinishBuilder.ParenthesesType
-
None
- NONE - Static variable in class nxopen.annotations.BaseSurfaceFinishBuilder.ToleranceOption
-
No tolerance
- NONE - Static variable in class nxopen.annotations.Centerline2dBuilder.Offset
-
no offset
- NONE - Static variable in class nxopen.annotations.Centerline3dBuilder.Offset
-
No Offset
- NONE - Static variable in class nxopen.annotations.ChamferSymbolPlacement
-
Specifies no symbol
- NONE - Static variable in class nxopen.annotations.DatumReferenceBuilder.DatumReferenceMaterialCondition
-
none
- NONE - Static variable in class nxopen.annotations.DimensionSetBuilder.DimensionSetMethod
-
Not part of a set
- NONE - Static variable in class nxopen.annotations.DualDimensionPlacement
-
Specifies no dual dimension
- NONE - Static variable in class nxopen.annotations.ExtensionLineDisplay
-
Doesn't display extension lines
- NONE - Static variable in class nxopen.annotations.FeatureControlFrameDataBuilder.ToleranceMaterialModifier
-
no material modifier
- NONE - Static variable in class nxopen.annotations.FeatureControlFrameDataBuilder.ToleranceZoneShape
-
no zone shape
- NONE - Static variable in class nxopen.annotations.FinishMethod
-
Specifies no finishing method
- NONE - Static variable in class nxopen.annotations.HoleCalloutSettingsBuilder.Featuretype
-
- NONE - Static variable in class nxopen.annotations.HoleCalloutSettingsBuilder.Parametertype
-
- NONE - Static variable in class nxopen.annotations.IdentificationLineLocation
-
Specifies no identification line
- NONE - Static variable in class nxopen.annotations.LeaderData.ArrowheadType
-
No terminating symbol
- NONE - Static variable in class nxopen.annotations.LineWeldBuilder.WeldSymbolWeldAlongContourType
-
- NONE - Static variable in class nxopen.annotations.LineWeldDataBuilder.ContourSymbolType
-
- NONE - Static variable in class nxopen.annotations.LineWeldDataBuilder.FinishSymbolType
-
- NONE - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSizeCodeType
-
- NONE - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSymbolType
-
- NONE - Static variable in class nxopen.annotations.MaterialConditionModifier
-
Specifies no material modifier.
- NONE - Static variable in class nxopen.annotations.NarrowDisplayOption
-
Doesn't display narrow dimension
- NONE - Static variable in class nxopen.annotations.OrdinateLineArrowDisplayOption
-
Doesn't display line and arrow
- NONE - Static variable in class nxopen.annotations.PartsListBuilder.PartsListMainSymbolText
-
- NONE - Static variable in class nxopen.annotations.PartsListBuilder.PartsListReferenceSymbolText
-
- NONE - Static variable in class nxopen.annotations.PartsListBuilder.PartsListSymbolType
-
- NONE - Static variable in class nxopen.annotations.RegionBuilder.CrosshatchPatterns
-
none
- NONE - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.PrimaryDatumDualMCMOptions
-
none
- NONE - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.PrimaryDatumMCMOptions
-
none
- NONE - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.SecondaryDatumDualMCMOptions
-
none
- NONE - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.SecondaryDatumMCMOptions
-
none
- NONE - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.TertiaryDatumDualMCMOptions
-
none
- NONE - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.TertiaryDatumMCMOptions
-
none
- NONE - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.ToleranceMCMOptions
-
none
- NONE - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.ZoneShapeOptions
-
none
- NONE - Static variable in class nxopen.annotations.SizeLetterCode
-
Specifies no letter code
- NONE - Static variable in class nxopen.annotations.SupplementarySymbol
-
Specifies no supplementary weld symbol
- NONE - Static variable in class nxopen.annotations.Symbol
-
Speifies no weld symbol
- NONE - Static variable in class nxopen.annotations.SymbolStyleBuilder.FcfTextUnderlineOption
-
- NONE - Static variable in class nxopen.annotations.TableSectionStyleBuilder.DisplayContinuationNoteType
-
None
- NONE - Static variable in class nxopen.annotations.TableSectionStyleBuilder.LocationOfHeader
-
None
- NONE - Static variable in class nxopen.annotations.Tail
-
Specifies no tail
- NONE - Static variable in class nxopen.annotations.ToleranceType
-
No tolerance
- NONE - Static variable in class nxopen.annotations.TrueLengthTextPosition
-
Do not display True Length Text
- NONE - Static variable in class nxopen.assemblies.Component.RepresentationMode
-
There are no bodies to display for the current component
- NONE - Static variable in class nxopen.assemblies.ComponentQuantity
-
No quantity
- NONE - Static variable in class nxopen.assemblies.LoadInterpartDataBuilder.OpenUnloadedParentsType
-
Load all partially loaded parts
that contain links and all immediate
level parents parts if they are
partially loaded
- NONE - Static variable in class nxopen.assemblies.PositionOverrideType
-
No position override
- NONE - Static variable in class nxopen.assemblies.Subset.PartitionViewStyleType
-
Show no partition view style for subset
- NONE - Static variable in class nxopen.AttributePropertiesBuilder.OperationType
-
- NONE - Static variable in class nxopen.AttributeTemplatesBuilder.ConstraintOptions
-
No constraint data, no further action is needed
- NONE - Static variable in class nxopen.BasePart.PartPreview
-
No preview image is stored for the part.
- NONE - Static variable in class nxopen.blockstyler.Tree.ControlType
-
None
- NONE - Static variable in class nxopen.cae.BaseFemPart.AxisymAbstractionType
-
No axisymmetric elements are allowed
- NONE - Static variable in class nxopen.cae.CaeSetObjectSubType
-
sub type is the same as the type of the object
- NONE - Static variable in class nxopen.cae.CorrelModePairingBuilder.Auto
-
not automatic
- NONE - Static variable in class nxopen.cae.DisplaySectionType
-
- NONE - Static variable in class nxopen.cae.DurabilityDamageEvaluationBuilder.EquivalentStressMethodEnum
-
- NONE - Static variable in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.EquivalentStressMethodEnum
-
None
- NONE - Static variable in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.OrthotropicMeanStressEnum
-
- NONE - Static variable in class nxopen.cae.DurabilityStressAxesBuilder.BeamStressEnum
-
None
- NONE - Static variable in class nxopen.cae.ElementNormalsType
-
- NONE - Static variable in class nxopen.cae.FEModelOccAttribute.AltRepDisplayStyle
-
No graphics when in alt rep
- NONE - Static variable in class nxopen.cae.LaminateDrapingDataBuilder.SolverType
-
no draping solver (Projection)
- NONE - Static variable in class nxopen.cae.LaminatePly.InterLaminarFailureTheoryType
-
No failure theory selected
- NONE - Static variable in class nxopen.cae.LaminatePly.PlyFailureTheoryType
-
No failure theory selected
- NONE - Static variable in class nxopen.cae.LbcAssociationMgr.BcType
-
no valid type
- NONE - Static variable in class nxopen.cae.MarkerType0d
-
- NONE - Static variable in class nxopen.cae.MeshControlBuilder.CylinderAxialElementSizeType
-
- NONE - Static variable in class nxopen.cae.MeshControlBuilder.CylinderCircularSizeType
-
- NONE - Static variable in class nxopen.cae.MeshControlBuilder.FilletAxialElementSizeType
-
- NONE - Static variable in class nxopen.cae.MeshControlBuilder.FilletCircumferenceSizeType
-
- NONE - Static variable in class nxopen.cae.MeshControlBuilder.SizingType
-
- NONE - Static variable in class nxopen.cae.modelcheck.DuplicateNodesCheckBuilder.MergePreference
-
No preference
- NONE - Static variable in class nxopen.cae.modelcheck.ElementQualityCheckBuilder.OutputElements
-
Output nothing
- NONE - Static variable in class nxopen.cae.modelcheck.ElementQualityCheckBuilder.ReportFormat
-
Does not generate report
- NONE - Static variable in class nxopen.cae.modelcheck.TestValueTypes.Validator
-
indicates no criteria value defined, not necessary to compare the check result with criteria value
- NONE - Static variable in class nxopen.cae.ModelDisplayBuilder.FreeEdgeMarker
-
No marker
- NONE - Static variable in class nxopen.cae.ModelDisplayBuilder.NodeMarkerType
-
None
- NONE - Static variable in class nxopen.cae.ModelDisplayBuilder.NodeMeshShowHideOptionType
-
None
- NONE - Static variable in class nxopen.cae.ModelDisplayBuilder.NodeUnattachedMarkerType
-
None
- NONE - Static variable in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeMarker
-
No marker
- NONE - Static variable in class nxopen.cae.optimization.Response
-
- NONE - Static variable in class nxopen.cae.optimization.TBSCastCondition.MiddlePlaneType
-
No definition of a central plane
- NONE - Static variable in class nxopen.cae.optimization.TBSLoadCase.LayerOption
-
No calculation
- NONE - Static variable in class nxopen.cae.optimization.TBSOutputControlOptions.Op2Option
-
Donot output op2 result
- NONE - Static variable in class nxopen.cae.Post.AnimationIterationTypes
-
- NONE - Static variable in class nxopen.cae.Post.AxisymetricAxis
-
- NONE - Static variable in class nxopen.cae.Post.EdgeStyle
-
- NONE - Static variable in class nxopen.cae.Post.FaceStyle
-
- NONE - Static variable in class nxopen.cae.Post.LimitDisplay
-
- NONE - Static variable in class nxopen.cae.Post.Position
-
- NONE - Static variable in class nxopen.cae.Post.ShowHeader
-
- NONE - Static variable in class nxopen.cae.PostGraphBuilder.NodalCombination
-
- NONE - Static variable in class nxopen.cae.PreTestExciterConfigBuilder.OffAxisAngleChoiceType
-
- NONE - Static variable in class nxopen.cae.ProjectNodesToCadGeometryBuilder.ListingOption
-
List nothing
- NONE - Static variable in class nxopen.cae.Result.BeamEnd
-
None
- NONE - Static variable in class nxopen.cae.Result.ComputationType
-
None
- NONE - Static variable in class nxopen.cae.Result.CoordinateSystemSource
-
- NONE - Static variable in class nxopen.cae.ResultMeasure.SubsetSelection
-
No subset selection, evaluate for entire model
- NONE - Static variable in class nxopen.cae.ResultProbeBuilder.GeometryValue
-
- NONE - Static variable in class nxopen.cae.ResultProbeBuilder.IterationSelection
-
- NONE - Static variable in class nxopen.cae.ResultProbeBuilder.LoadcaseSelection
-
- NONE - Static variable in class nxopen.cae.ResultProbeBuilder.SelectionType
-
- NONE - Static variable in class nxopen.cae.ResultsManipulationBuilder.UnitsSystem
-
- NONE - Static variable in class nxopen.cae.ResultVariable.NodalCombination
-
- NONE - Static variable in class nxopen.cae.SimLbcFolder.Type
-
No folder type
- NONE - Static variable in class nxopen.cae.SuppressHoleBuilder.OptionPointCreate
-
- NONE - Static variable in class nxopen.cae.xyplot.PointMarker
-
No marker
- NONE - Static variable in class nxopen.cae.xyplot.SurfaceColorOption
-
No shading
- NONE - Static variable in class nxopen.cae.xyplot.TextType
-
Not defined type
- NONE - Static variable in class nxopen.CaeObjectType.CaeSubType
-
sub type is the same as the type of the object
- NONE - Static variable in class nxopen.cam.BladeCutLevels.HubExtensionsTypes
-
None
- NONE - Static variable in class nxopen.cam.BlankIpw.StatusTypes
-
blank ipw status none
- NONE - Static variable in class nxopen.cam.BoundaryMillingMemberSet.FeedUnitTypes
-
no feed rate unit
- NONE - Static variable in class nxopen.cam.BoundaryTurnMemberCorner.AngleValueType
-
- NONE - Static variable in class nxopen.cam.BoundaryTurnMemberCorner.FeedType
-
- NONE - Static variable in class nxopen.cam.BoundaryTurnMemberCorner.ShapeType
-
- NONE - Static variable in class nxopen.cam.BoundaryTurnMemberFeed.FeedType
-
- NONE - Static variable in class nxopen.cam.BoundaryTurnMemberFineFinishCorner.Cleanup
-
- NONE - Static variable in class nxopen.cam.BoundaryTurnMemberFineFinishOffset.StatusValue
-
- NONE - Static variable in class nxopen.cam.BoundaryTurnMemberOffset.ModeType
-
- NONE - Static variable in class nxopen.cam.BoundaryTurnSet.FeedUnitTypes
-
no feed rate unit
- NONE - Static variable in class nxopen.cam.CamInspectionOperationFeaturetypes
-
Not a Feature
- NONE - Static variable in class nxopen.cam.CAMObject.FeedRateUnit
-
no feed rate unit
- NONE - Static variable in class nxopen.cam.CenterlineDrillTurningBuilder.DwellTypes
-
Dwell: None
- NONE - Static variable in class nxopen.cam.CenterlineDrillTurningBuilder.SpindleStopTypes
-
Spindle stop: None
- NONE - Static variable in class nxopen.cam.ChipControl.Types
-
Chip control mode: None
- NONE - Static variable in class nxopen.cam.CornerControlBuilder.AdjustFeedRateOptions
-
none
- NONE - Static variable in class nxopen.cam.CornerControlBuilder.SlowdownDistanceOptions
-
none
- NONE - Static variable in class nxopen.cam.CornerControlBuilder.SmoothingOptions
-
none
- NONE - Static variable in class nxopen.cam.Cutcom.Types
-
cutter compensation off
- NONE - Static variable in class nxopen.cam.CutDwell.Types
-
Dwell after Rough Cut: None
- NONE - Static variable in class nxopen.cam.CutParametersExtendAtStartMode
-
None
- NONE - Static variable in class nxopen.cam.CutParametersExtendFloorTypes
-
None
- NONE - Static variable in class nxopen.cam.CutParametersIpwTypes
-
none
- NONE - Static variable in class nxopen.cam.CutParametersSimplifyShapesTypes
-
none
- NONE - Static variable in class nxopen.cam.CutParametersTrimControlTypes
-
none
- NONE - Static variable in class nxopen.cam.CutPatternBuilder.Types
-
None
- NONE - Static variable in class nxopen.cam.DisplayTool.ToolDisplayTypes
-
Tool Display: None
- NONE - Static variable in class nxopen.cam.DmCmBuilder.ContactPositionRingHeightType
-
none
- NONE - Static variable in class nxopen.cam.DmCmBuilder.ExtDisType
-
None
- NONE - Static variable in class nxopen.cam.DmRotaryFloorFinishBuilder.GougeActionTypes
-
None
- NONE - Static variable in class nxopen.cam.DmSurfBuilder.GougeActionType
-
None
- NONE - Static variable in class nxopen.cam.DrillSurfaceBuilder.SurfaceType
-
none
- NONE - Static variable in class nxopen.cam.FeedRateUnit
-
no feed rate unit
- NONE - Static variable in class nxopen.cam.FinishDwell.Types
-
Dwell after Finish/Profile Cut: None
- NONE - Static variable in class nxopen.cam.GeometrySet.LoopsIgnoreTypes
-
Deprecated.
none
- NONE - Static variable in class nxopen.cam.GeometrySet.MaterialSideTypes
-
none
- NONE - Static variable in class nxopen.cam.InitialProfilePlunge.Modes
-
None
- NONE - Static variable in class nxopen.cam.InspectionAlignmentBuilder.AlignmentDirections
-
No alignment direction specified
- NONE - Static variable in class nxopen.cam.InspectionMethodBuilder.MethodTypes
-
None
- NONE - Static variable in class nxopen.cam.InspectionMethodBuilder.OperationTypes
-
None
- NONE - Static variable in class nxopen.cam.InspectionMethodBuilder.ReferenceFeatureModeTypes
-
No relative measurement
- NONE - Static variable in class nxopen.cam.InspectionMethodBuilder.TransitionTypes
-
No Transition Point
- NONE - Static variable in class nxopen.cam.InspectionPathBuilder.SequenceType
-
None
- NONE - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamPriDatumModifier
-
None
- NONE - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamSecDatumModifier
-
None
- NONE - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamTerDatumModifier
-
None
- NONE - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamTolMatModifier
-
None
- NONE - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamTolMatModifierDup
-
None
- NONE - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamTolZoneShape
-
None
- NONE - Static variable in class nxopen.cam.LaserControlPoint.HeadOrientTypes
-
None
- NONE - Static variable in class nxopen.cam.LaserPiercingPoint.Types
-
None
- NONE - Static variable in class nxopen.cam.LaserProfileMove.CollisionChecks
-
None
- NONE - Static variable in class nxopen.cam.LowerLimit.ModeTypes
-
none
- NONE - Static variable in class nxopen.cam.MillingToolBuilder.ToolDirectionTypes
-
None
- NONE - Static variable in class nxopen.cam.MillOrientGeomBuilder.LowerLimitModes
-
lower limit mode: None
- NONE - Static variable in class nxopen.cam.MinCutDepth.Types
-
None
- NONE - Static variable in class nxopen.cam.MinCutLength.Types
-
None
- NONE - Static variable in class nxopen.cam.MultiRamp.Types
-
Multi ramp pattern: None
- NONE - Static variable in class nxopen.cam.NcmAvoidancePointBuilder.PointStates
-
Avoidance point inactive
- NONE - Static variable in class nxopen.cam.NcmAvoidancePointBuilder.ToolAxisUsages
-
tool axis inactive
- NONE - Static variable in class nxopen.cam.NcmClearanceBuilder.ClearanceTypes
-
clearance turned off
- NONE - Static variable in class nxopen.cam.NcmHoleMachining.CutcomTypes
-
cutter compensation off
- NONE - Static variable in class nxopen.cam.NcmHoleMachining.FinalTypes
-
none
- NONE - Static variable in class nxopen.cam.NcmHoleMachining.InitialTypes
-
none
- NONE - Static variable in class nxopen.cam.NcmHoleMachiningEngRet.EngRetTypes
-
None
- NONE - Static variable in class nxopen.cam.NcmPlanarBuilder.CutcomTypes
-
cutter compensation off
- NONE - Static variable in class nxopen.cam.NcmPlanarBuilder.FinalRet
-
none
- NONE - Static variable in class nxopen.cam.NcmPlanarBuilder.FinalTypes
-
none
- NONE - Static variable in class nxopen.cam.NcmPlanarBuilder.InitialEng
-
none
- NONE - Static variable in class nxopen.cam.NcmPlanarBuilder.InitialTypes
-
none
- NONE - Static variable in class nxopen.cam.NcmPlanarBuilder.PredrillPointsOutputOptions
-
No Pre-Drill points
- NONE - Static variable in class nxopen.cam.NcmPlanarBuilder.TransferWithinLevelsWiths
-
none
- NONE - Static variable in class nxopen.cam.NcmPlanarEngRetBuilder.EngRetTypes
-
None
- NONE - Static variable in class nxopen.cam.NcmScEngRetBuilder.EngRetTypes
-
None
- NONE - Static variable in class nxopen.cam.NcmTransferBuilder.AppDepMethodTypes
-
none
- NONE - Static variable in class nxopen.cam.NcmTurnThreadBuilder.LocalReturnModes
-
None
- NONE - Static variable in class nxopen.cam.NcmTurnThreadBuilder.LocalReturnTypes
-
None
- NONE - Static variable in class nxopen.cam.NcmWedmBuilder.CutcomOffTypes
-
no cutcom off
- NONE - Static variable in class nxopen.cam.NcmWedmBuilder.CutcomOnTypes
-
no cutcom on
- NONE - Static variable in class nxopen.cam.NcmWedmBuilder.GlobalStopPointMethodTypes
-
no stop points
- NONE - Static variable in class nxopen.cam.OperationDisplayOptionsBuilder.PatternDisplayTypes
-
Pattern Display: None
- NONE - Static variable in class nxopen.cam.OperationDisplayOptionsBuilder.ToolDisplayTypes
-
Tool Display: None
- NONE - Static variable in class nxopen.cam.OrientGeomBuilder.SpecialOutputModes
-
Special output mode: None
- NONE - Static variable in class nxopen.cam.ParamBuilder.OptimizationTypes
-
none
- NONE - Static variable in class nxopen.cam.PmopToolAxisCiBuilder.ToolAxisTypes
-
+ZM axis
- NONE - Static variable in class nxopen.cam.ProbeControlParametersBuilder.AdjustmentTypes
-
None
- NONE - Static variable in class nxopen.cam.ProbeControlParametersBuilder.PrintType
-
None
- NONE - Static variable in class nxopen.cam.ProbeInspectSurfacePointMoveBuilder.ToolAxis
-
Use the Previous Tool Axis
- NONE - Static variable in class nxopen.cam.ProbeProtectedParametersBuilder.AppMethodTypes
-
none
- NONE - Static variable in class nxopen.cam.ProbeProtectedParametersBuilder.DepMethodTypes
-
none
- NONE - Static variable in class nxopen.cam.ReliefCut.Modes
-
None
- NONE - Static variable in class nxopen.cam.ReliefPlunge.Types
-
Relief plunge: None
- NONE - Static variable in class nxopen.cam.RoughFinishTurningBuilder.MaximumAreaModes
-
None.
- NONE - Static variable in class nxopen.cam.RoughFinishTurningBuilder.MinimumAreaTypes
-
None.
- NONE - Static variable in class nxopen.cam.RoughFinishTurningBuilder.MinmaxSizeModes
-
None.
- NONE - Static variable in class nxopen.cam.RoughTurningBuilder.CleanupTypes
-
Cleanup mode: None
- NONE - Static variable in class nxopen.cam.SpringPasses.Types
-
Alternate Spring Passes: None
- NONE - Static variable in class nxopen.cam.SpunOutlineGeom.CreationTypes
-
no spun outline
- NONE - Static variable in class nxopen.cam.SteepContainment.Types
-
None
- NONE - Static variable in class nxopen.cam.StepoverBuilder.StepoverTypes
-
None
- NONE - Static variable in class nxopen.cam.StopPosition.Types
-
Stop At mode: Off
- NONE - Static variable in class nxopen.cam.TeachmodeLinearMoveBuilder.InitialRetractTypes
-
None
- NONE - Static variable in class nxopen.cam.ThreadTurningBuilder.InfeedModes
-
None
- NONE - Static variable in class nxopen.cam.ToolAxisFixed.Types
-
None or +ZM
- NONE - Static variable in class nxopen.cam.ToolAxisTilt.Types
-
No tilting
- NONE - Static variable in class nxopen.cam.ToolAxisVariable.MaximumLeadAngleTypes
-
None
- NONE - Static variable in class nxopen.cam.ToolAxisVariable.NominalLeadAngleTypes
-
None
- NONE - Static variable in class nxopen.cam.ToolChangeCiBuilder.HeadDesignationTypes
-
None
- NONE - Static variable in class nxopen.cam.ToolPathSplitBuilder.TransferUsingMethods
-
no transfer type
- NONE - Static variable in class nxopen.cam.ToolPathSplitParametersBuilder.TransferUsingMethods
-
no transfer type
- NONE - Static variable in class nxopen.cam.TrimPlane.LimitOptions
-
Plane is inactive.
- NONE - Static variable in class nxopen.cam.TrimPoint.Options
-
Point is inactive.
- NONE - Static variable in class nxopen.cam.TrimPoint.RampAngleOptions
-
no ramp angle.
- NONE - Static variable in class nxopen.cam.TurnAvoidanceApproachBuilder.ApproachPathModes
-
Path is inactive.
- NONE - Static variable in class nxopen.cam.TurnAvoidanceClearanceBuilder.AxialPlaneModes
-
Plane is inactive.
- NONE - Static variable in class nxopen.cam.TurnAvoidanceClearanceBuilder.RadialPlaneModes
-
Plane is inactive.
- NONE - Static variable in class nxopen.cam.TurnAvoidanceDepartureBuilder.DeparturePathModes
-
Path is inactive.
- NONE - Static variable in class nxopen.cam.TurnAvoidanceFromBuilder.FromPointModes
-
Point is inactive.
- NONE - Static variable in class nxopen.cam.TurnAvoidanceGohomeBuilder.GohomePointMotionTypes
-
Point is inactive.
- NONE - Static variable in class nxopen.cam.TurnAvoidancePathPointsBuilder.CustomFeedrateUnitTypes
-
Feed Rate: Automatic
- NONE - Static variable in class nxopen.cam.TurnAvoidanceReturnBuilder.ReturnPointMotionTypes
-
Point is inactive.
- NONE - Static variable in class nxopen.cam.TurnAvoidanceStartBuilder.StartPointMotionTypes
-
Point is inactive.
- NONE - Static variable in class nxopen.cam.TurnFeatureGeomBuilder.SurfaceSensitivityModes
-
Surface sensitivity is inactive.
- NONE - Static variable in class nxopen.cam.TurnGrooveCornerControl.CornerTypes
-
Groove Corner Control corner type is None.
- NONE - Static variable in class nxopen.cam.TurnGrooveCornerControl.ReliefPlungeTypes
-
Groove Corner Control Relief Plunge Type is None.
- NONE - Static variable in class nxopen.cam.TurnOverlap.Types
-
Overlap mode: Off
- NONE - Static variable in class nxopen.cam.TurnProbeClearanceBuilder.AxialPlaneModes
-
Plane is inactive.
- NONE - Static variable in class nxopen.cam.TurnProbeClearanceBuilder.RadialPlaneModes
-
Plane is inactive.
- NONE - Static variable in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.AdjustmentModeTypes
-
Ajustment: None
- NONE - Static variable in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.DwellUnitTypes
-
None
- NONE - Static variable in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.ModeTypes
-
Local Return: None
- NONE - Static variable in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.ReturnMoveModeTypes
-
Return Move: Nove
- NONE - Static variable in class nxopen.cam.TurnRoughFinishTestCut.FeedInTypes
-
Test Cut Feed In: None
- NONE - Static variable in class nxopen.cam.TurnRoughFinishTestCut.FeedOutTypes
-
Test Cut Feed Out: None
- NONE - Static variable in class nxopen.cam.TurnRoughFinishTestCut.SecondarySequenceTypes
-
Secondary Test Cut Sequence: None
- NONE - Static variable in class nxopen.cam.TurnRoughFinishTestCut.SequenceTypes
-
Test Cut Sequence: None
- NONE - Static variable in class nxopen.cam.WedmGeomBuilder.CornerSmoothingType
-
none
- NONE - Static variable in class nxopen.cam.WedmGeomBuilder.SmoothLeadInTypes
-
smooth leadin type none
- NONE - Static variable in class nxopen.cam.WedmGeomBuilder.SmoothLeadOutTypes
-
smooth leadin type none
- NONE - Static variable in class nxopen.cam.WedmGeomBuilder.StopPointFlagTypes
-
stop point option none
- NONE - Static variable in class nxopen.cam.WedmOperationBuilder.CornerSmoothingType
-
none
- NONE - Static variable in class nxopen.cam.WedmOperationBuilder.SmoothLeadInTypes
-
smooth leadin type none
- NONE - Static variable in class nxopen.cam.WedmOperationBuilder.SmoothLeadOutTypes
-
smooth leadin type none
- NONE - Static variable in class nxopen.cam.WedmOperationBuilder.StopPointFlagTypes
-
stop point option none
- NONE - Static variable in class nxopen.cam.WedmPointDefinitionBuilder.PointStates
-
wedm point none
- NONE - Static variable in class nxopen.cam.WedmStatusControlCiBuilder.StatusTypes
-
no control
- NONE - Static variable in class nxopen.cam.ZAxisSmoothing.Options
-
none
- NONE - Static variable in class nxopen.die.DrawBeadBuilder.OutputTypes
-
Creates a small sphere on the centerline.
- NONE - Static variable in class nxopen.die.OutputCurvesBuilder.SmoothTypes
-
No smoothing
- NONE - Static variable in class nxopen.die.OutputCurvesBuilder.TrimCurveTypes
-
No trim curve.
- NONE - Static variable in class nxopen.die.PierceTaskBuilder.CenterPointOptionTypes
-
No center points output
- NONE - Static variable in class nxopen.die.TrimTaskBuilder.MatchCutTypes
-
No match cut.
- NONE - Static variable in class nxopen.display.BoundedGridBuilder.ShowLabelType
-
Never show labels
- NONE - Static variable in class nxopen.display.DynamicSectionTypes.Axis
-
Arbitrary axis
- NONE - Static variable in class nxopen.display.FacetSettingsBuilder.FacetUpdate
-
- NONE - Static variable in class nxopen.display.ImageBaseBuilder.TransparencyColorFrom
-
No Transparency Color
- NONE - Static variable in class nxopen.display.ImageBasedLighting.ImageBlurType
-
- NONE - Static variable in class nxopen.display.ImageBasedLighting.ShadowsType
-
No shadows will be produced.
- NONE - Static variable in class nxopen.display.LightBuilder.ShadowType
-
No shadows will be produced.
- NONE - Static variable in class nxopen.display.RayTracedStudioEditorBuilder.StaticAntialiasingType
-
No antialiasing performed to provide quick, preview of ray traced display for static image rendering
- NONE - Static variable in class nxopen.display.RayTracedStudioEditorBuilder.StationaryAntialiasingType
-
No antialiasing performed to provide quick, preview of ray traced display when dynamic interaction stops
- NONE - Static variable in class nxopen.display.Shadows.SsaoContrastType
-
no contrast
- NONE - Static variable in class nxopen.display.TrueShadingBuilder.SurfaceOrientType
-
Do not project shadows
- NONE - Static variable in class nxopen.DisplayManager.FacetCacheMemoryLevelType
-
- NONE - Static variable in class nxopen.drawings.BordersAndZonesBuilder.HorizontalCenteringMarkType
-
Deprecated.
None
- NONE - Static variable in class nxopen.drawings.BordersAndZonesBuilder.VerticalCenteringMarkType
-
Deprecated.
None
- NONE - Static variable in class nxopen.drawings.BordersAndZonesBuilder.ZoneMethod
-
Deprecated.
None
- NONE - Static variable in class nxopen.drawings.CustomViewSettingsBuilder.Interfering
-
- NONE - Static variable in class nxopen.drawings.CustomViewSettingsBuilder.ThreadStandards
-
- NONE - Static variable in class nxopen.drawings.DetailViewBuilder.LabelOnParentType
-
No display
- NONE - Static variable in class nxopen.drawings.DrawingRegionBuilder.RegionContinuation
-
- NONE - Static variable in class nxopen.drawings.DrawingRegionBuilder.RegionDraftingObjectType
-
- NONE - Static variable in class nxopen.drawings.DrawingRegionBuilder.RegionGrowthDirection
-
- NONE - Static variable in class nxopen.drawings.HorizontalCenteringMarkType
-
None
- NONE - Static variable in class nxopen.drawings.Method
-
To support legacy parts
- NONE - Static variable in class nxopen.drawings.SectionLineStyleBuilder.FontStyle
-
Deprecated.
- NONE - Static variable in class nxopen.drawings.VerticalCenteringMarkType
-
None
- NONE - Static variable in class nxopen.drawings.View2dOrientBuilder.Type
-
not oriented
- NONE - Static variable in class nxopen.drawings.ViewDetailLabelBuilder.LabelParentDisplayTypes
-
- NONE - Static variable in class nxopen.drawings.ViewProjectionBuilder.CurveType
-
None
- NONE - Static variable in class nxopen.ExtrudeOffsetDataOffsetType
-
No offset
- NONE - Static variable in class nxopen.ExtrudeTaperDataTaperType
-
No taper
- NONE - Static variable in class nxopen.facet.CleanupFacetBodyBuilder.CleanupOptions
-
Don't perform Analysis or Repair
- NONE - Static variable in class nxopen.features.AestheticFaceBlendBuilder.EndTrimObjectType
-
Does not override end trim object.
- NONE - Static variable in class nxopen.features.AestheticFaceBlendBuilder.StartTrimObjectType
-
Does not override start trim object.
- NONE - Static variable in class nxopen.features.AOCSBuilder.Extend
-
no extension
- NONE - Static variable in class nxopen.features.AOCSBuilder.ExtendToFace
-
no extentsion
- NONE - Static variable in class nxopen.features.AOCSBuilder.Trim
-
no trimming
- NONE - Static variable in class nxopen.features.BridgeCurveBuilder.MinRadiusTypes
-
Deprecated.
no minimum radius
- NONE - Static variable in class nxopen.features.BridgeCurveBuilderEx.RadiusConstraintMethods
-
No constraint
- NONE - Static variable in class nxopen.features.DraftBodyBuilder.MatchingType
-
No match type is specified
- NONE - Static variable in class nxopen.features.DraftBodyBuilder.MatchOption
-
No match option is specified
- NONE - Static variable in class nxopen.features.DraftBodyBuilder.RepairingPartingEdgeOption
-
No repair parting edge option is specified
- NONE - Static variable in class nxopen.features.DraftBodyBuilder.RepairOption
-
No repair option is specified
- NONE - Static variable in class nxopen.features.EmbossLimit.EndcapMethod
-
Indicates End-Cap geometry is formulated by the selected geometry without displacement.
- NONE - Static variable in class nxopen.features.EmbossProjection.ProjectionOption
-
Indicates no geometry.
- NONE - Static variable in class nxopen.features.FaceBlendBuilder.OverflowMethod
-
No overflow option
- NONE - Static variable in class nxopen.features.FaceBlendBuilder.TrimmingMethod
-
No trim
- NONE - Static variable in class nxopen.features.FillHoleBuilder.ShapeControlTypes
-
- NONE - Static variable in class nxopen.features.GeometricConstraintData.AutoConstraintType
-
No automatic constraint
- NONE - Static variable in class nxopen.features.GlobalShapingBuilder.DirectionMethodType
-
Overcrown has no direction specified
- NONE - Static variable in class nxopen.features.LawExtensionBuilder.OppositeSideExtensionOptions
-
No extension on opposite side
- NONE - Static variable in class nxopen.features.LawExtensionBuilderEx.MiterOptions
-
No miter solution between two discontinuous faces
- NONE - Static variable in class nxopen.features.LawExtensionBuilderEx.OppositeSideExtensionOptions
-
No extension
- NONE - Static variable in class nxopen.features.MapleBuilder.AssociativityEnum
-
- NONE - Static variable in class nxopen.features.MatchEdgeBuilder.MatchExact
-
Don't match exact
- NONE - Static variable in class nxopen.features.MeshSurfaceBuilder.ConstraintDirection
-
Not specified
- NONE - Static variable in class nxopen.features.MeshSurfaceBuilder.ConstraintType
-
No constraint
- NONE - Static variable in class nxopen.features.OffsetCurveBuilder.TrimOption
-
None
- NONE - Static variable in class nxopen.features.ProjectCurveBuilder.ProjectionOptionType
-
Represents None
- NONE - Static variable in class nxopen.features.RapidSurfaceBuilder.AttachmentTypes
-
attach to nothing
- NONE - Static variable in class nxopen.features.RibBuilder.RibDraftOptions
-
No Draft
- NONE - Static variable in class nxopen.features.sheetmetal.AeroFlangeBuilder.CompType
-
None
- NONE - Static variable in class nxopen.features.sheetmetal.BendOptions.BendReliefTypeOptions
-
igRipBendRelief
- NONE - Static variable in class nxopen.features.sheetmetal.BendOptions.CornerReliefTypeOptions
-
- NONE - Static variable in class nxopen.features.sheetmetal.BendTaperBuilder.WebTaperType
-
None
- NONE - Static variable in class nxopen.features.sheetmetal.ConvertToSheetmetalBuilder.BendReliefTypeOptions
-
- NONE - Static variable in class nxopen.features.sheetmetal.CornerTreatmentBuilder.CornerTreatmentType
-
- NONE - Static variable in class nxopen.features.sheetmetal.EditCornerBuilder.CornerReliefTypeOptions
-
- NONE - Static variable in class nxopen.features.sheetmetal.FlangeBuilder.MatchFaceOptions
-
The flange is placed on the selected edge
- NONE - Static variable in class nxopen.features.sheetmetal.FlatSolidBuilder.TransformComponentsOption
-
do not transform components
- NONE - Static variable in class nxopen.features.sheetmetal.HemFlangeBuilder.BendReliefOptions
-
- NONE - Static variable in class nxopen.features.sheetmetal.MiterOptions.ClosedCornerTypeOptions
-
Corner is not closed
- NONE - Static variable in class nxopen.features.sheetmetal.MiterOptions.PositionOptions
-
no miter
- NONE - Static variable in class nxopen.features.sheetmetal.ResizeBendRadiusBuilder.BendReliefTypeOptions
-
- NONE - Static variable in class nxopen.features.shipdesign.BuiltUpManModeBuilder.BuiltUpManModeType
-
- NONE - Static variable in class nxopen.features.shipdesign.ManufacturingStockBuilder.ObjectType
-
None
- NONE - Static variable in class nxopen.features.shipdesign.ManufacturingStockBuilder.StockDataSourceType
-
Set to None if we edit this feature
- NONE - Static variable in class nxopen.features.shipdesign.PenetrationRequest.CoutoutType
-
- NONE - Static variable in class nxopen.features.shipdesign.PillarBuilder.CapOptions
-
- NONE - Static variable in class nxopen.features.shipdesign.PillarBuilder.EndCutTypes
-
No end cuts are applied
- NONE - Static variable in class nxopen.features.shipdesign.PillarBuilder.EndTypeOptions
-
No end cuts are applied
- NONE - Static variable in class nxopen.features.shipdesign.ProfileBuilder.EndCutOption
-
- NONE - Static variable in class nxopen.features.shipdesign.ProfileCutoutBuilder.Orientation
-
no set
- NONE - Static variable in class nxopen.features.shipdesign.ShellTemplateBuilder.MarkingTypes
-
Do not draw template marking lines on plate.
- NONE - Static variable in class nxopen.features.shipdesign.ShipIntersectionsBuilder.Type
-
- NONE - Static variable in class nxopen.features.shipdesign.ShipnameFieldBuilderType
-
Unknown Field Type
- NONE - Static variable in class nxopen.features.shipdesign.ShipnamesBuilderType
-
- NONE - Static variable in class nxopen.features.shipdesign.StiffenerBuilder.EndCutTypes
-
No end cuts are applied
- NONE - Static variable in class nxopen.features.shipdesign.StiffenerBuilder.KnuckleOptions
-
No special handling for knuckles
- NONE - Static variable in class nxopen.features.StudioSplineBuilder.MatchKnotsType
-
Deprecated.
No knot matching
- NONE - Static variable in class nxopen.features.StudioSplineBuilderEx.MatchKnotsTypes
-
No knot matching
- NONE - Static variable in class nxopen.features.StudioXformBuilderEx.PoleEditType
-
Not edited
- NONE - Static variable in class nxopen.features.StyledBlendBuilder.StyledBlendRadiusConstraintType
-
Non-radius constraint
- NONE - Static variable in class nxopen.features.StyledCornerBuilder.InteriorCurveTypes
-
No interior curve
- NONE - Static variable in class nxopen.features.StyledCornerBuilder.ShapeControlMethodsTypes
-
No shape control
- NONE - Static variable in class nxopen.features.subdivision.TransformCageData.FallOffMethodType
-
No falloff
- NONE - Static variable in class nxopen.features.TrimCurveBuilder.CurveExtensionTypes
-
None
- NONE - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.ShowVisionConeType
-
Represents the vision cones aren't shown
- NONE - Static variable in class nxopen.fields.DisplayPropertiesBuilder.DepLabelValueEnum
-
- NONE - Static variable in class nxopen.fields.FieldEvaluator.InterpolationEnum
-
No interpolation method; table can only be used as a lookup
- NONE - Static variable in class nxopen.fields.SpatialMap.SubtypeEnum
-
No subtype
- NONE - Static variable in class nxopen.fields.SpatialMap.TypeEnum
-
No Map
- NONE - Static variable in class nxopen.formboard.ObjectAttributeReferenceBuilder.LeaderType
-
No leader for annotation of selected object.
- NONE - Static variable in class nxopen.geometricanalysis.CurveAnalysisCombsBuilder.DirectionOptionType
-
Deprecated.
no direction
- NONE - Static variable in class nxopen.geometricanalysis.CurveAnalysisInflectionsBuilder.DirectionOptionType
-
Deprecated.
no direction
- NONE - Static variable in class nxopen.geometricanalysis.CurveAnalysisPeaksBuilder.DirectionOptionType
-
Deprecated.
no direction
- NONE - Static variable in class nxopen.geometricanalysis.CurveAnalysisRecord.DirectionOptionType
-
Deprecated.
no direction
- NONE - Static variable in class nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder.ProjectionTypes
-
no projection
- NONE - Static variable in class nxopen.geometricanalysis.DeviationGaugeBuilder.AdditionalValuesLabelType
-
None
- NONE - Static variable in class nxopen.geometricanalysis.DeviationGaugeBuilder.ColorPlotTypes
-
None
- NONE - Static variable in class nxopen.geometricanalysis.DeviationGaugeBuilder.MinMaxType
-
None
- NONE - Static variable in class nxopen.geometricanalysis.SurfaceIntersectionBuilder.ProjectionTypes
-
no projection
- NONE - Static variable in class nxopen.geometricutilities.BooleanRegionSelect.SelectOption
-
No regions to pick
- NONE - Static variable in class nxopen.geometricutilities.CircularPattern.StaggerOptions
-
No stagger applied
- NONE - Static variable in class nxopen.geometricutilities.CombOptionsBuilder.AnalysisTypes
-
None
- NONE - Static variable in class nxopen.geometricutilities.CombOptionsBuilder.LabelTypes
-
None
- NONE - Static variable in class nxopen.geometricutilities.CurveExtensionBuilder.ExtensionOption
-
No extension
- NONE - Static variable in class nxopen.geometricutilities.ModlMotion.Options
-
No move
- NONE - Static variable in class nxopen.geometricutilities.PatternFill.PatternFillOptions
-
no section is defined
- NONE - Static variable in class nxopen.geometricutilities.PointSetAlignmentBuilder.ConstraintOptions
-
No constraint
- NONE - Static variable in class nxopen.geometricutilities.Rebuild.RebuildTypes
-
No degree entry or simple integer/enumerable value used to specify the rebuild degree.
- NONE - Static variable in class nxopen.geometricutilities.RectangularPattern.StaggerOptions
-
No stagger applied
- NONE - Static variable in class nxopen.geometricutilities.ShapeFrameBuilder.AnchorAttachmentType
-
Anchor is not attached to the frame
- NONE - Static variable in class nxopen.geometricutilities.SpineDefinitionBuilder.MethodOptions
-
No spine
- NONE - Static variable in class nxopen.geometricutilities.SplineExtensionBuilder.ExtensionOption
-
No extension
- NONE - Static variable in class nxopen.geometricutilities.StepOptionBehavior.StepOptionType
-
Does not add step faces.
- NONE - Static variable in class nxopen.geometricutilities.TransformerData.ObjectType
-
- NONE - Static variable in class nxopen.HumanData.DatabaseType
-
- NONE - Static variable in class nxopen.InferSnapType.SnapType
-
No Snap point
- NONE - Static variable in class nxopen.JtCreator.PmiOption
-
NONE
- NONE - Static variable in class nxopen.layout2d.Layout2dComponentMemberType
-
- NONE - Static variable in class nxopen.ListingWindow.DeviceType
-
Output is not written anywhere; output gets discarded
- NONE - Static variable in class nxopen.LoadOptions.LoadComponents
-
load none of the components
- NONE - Static variable in class nxopen.LoadOptions.UpdateSubsetOnLoad
-
replay recipe
- NONE - Static variable in class nxopen.MeasureBuilder.AnnotationType
-
- NONE - Static variable in class nxopen.MeasureBuilder.RequirementType
-
- NONE - Static variable in class nxopen.MeasureManager.EndpointType
-
default for other entity types
- NONE - Static variable in class nxopen.mechatronics.DisplayChangerBuilder.ExecuteModes
-
Never execute
- NONE - Static variable in class nxopen.mechatronics.GanttOperationParameterBuilder.OperatorOption
-
- NONE - Static variable in class nxopen.mechatronics.ParameterStockBuilder.Assignment
-
None
- NONE - Static variable in class nxopen.mechatronics.ReadWriteDeviceBuilder.ExecuteMode
-
Never execute
- NONE - Static variable in class nxopen.MeshProfileString.SelectedPoint
-
- NONE - Static variable in class nxopen.motion.LinkMassProperty.MassPropertyType
-
No mass property
- NONE - Static variable in class nxopen.motion.MotionEnvironment.Solver
-
No solver
- NONE - Static variable in class nxopen.motion.MotionObject.GroupType
-
Motion object dose not belong to any motion group
- NONE - Static variable in class nxopen.PartCleanup.DeleteGroups
-
delete none of the empty groups
- NONE - Static variable in class nxopen.pdm.CaeCloneManager.CloneOption
-
Deprecated.
- NONE - Static variable in class nxopen.pdm.PartFromPartBuilder.FileSaveAs
-
save none during save as
- NONE - Static variable in class nxopen.pdm.PartOperationBuilder.DependentFileSaveAs
-
Deprecated.
save none during save as
- NONE - Static variable in class nxopen.pdm.PartOperationBuilder.NonMasterSaveAs
-
Deprecated.
save none during save as
- NONE - Static variable in class nxopen.pdm.PartOperationCopyBuilder.CopyDependentFiles
-
save none during save as
- NONE - Static variable in class nxopen.pdm.PartOperationCopyBuilder.CopyNonMasterParts
-
save none during save as
- NONE - Static variable in class nxopen.PhysicalMaterial.AssignWarning
-
No warning.
- NONE - Static variable in class nxopen.preferences.GdtOption
-
Does not inherit any GD and T display instances.
- NONE - Static variable in class nxopen.preferences.GeneralDisplayIdOption
-
None
- NONE - Static variable in class nxopen.preferences.GeneralExtractedEdgesOption
-
None
- NONE - Static variable in class nxopen.preferences.HiddenLineInterferingSolidsOption
-
None
- NONE - Static variable in class nxopen.preferences.PartModeling.GridResolutionType
-
No specific selection for grid resolution
- NONE - Static variable in class nxopen.preferences.PartVisualizationShade.ViewUpdateModeType
-
No object
- NONE - Static variable in class nxopen.preferences.PmiOption
-
Does not inherit PMI.
- NONE - Static variable in class nxopen.preferences.ReferenceSetBehavior
-
No PMI will be inherited if any of the PMI objects has a reference to an object which is not in the active reference set.
- NONE - Static variable in class nxopen.preferences.RoutingApplicationView.AppType
-
Not currently in any of the routing applications.
- NONE - Static variable in class nxopen.preferences.RoutingPath.AllowedCornerType
-
UF_ROUTE_AV_CORNERS_NONE
- NONE - Static variable in class nxopen.preferences.RoutingPath.DefaultCornerType
-
No Corner
- NONE - Static variable in class nxopen.preferences.RoutingPath.RadiusUnits
-
Unspecified.
- NONE - Static variable in class nxopen.preferences.SessionModeling.DynamicUpdateType
-
Indicates that Dynamic Update type is not selected
- NONE - Static variable in class nxopen.preferences.SessionModeling.PoleDisplayStyleType
-
- NONE - Static variable in class nxopen.preferences.SessionModeling.PreviewResolutionType
-
- NONE - Static variable in class nxopen.preferences.SessionModeling.SaveDataForFeatureEditOption
-
Indicates the no additional data is saved
- NONE - Static variable in class nxopen.preferences.SessionPdm.JtUpdateFromSourceType
-
- NONE - Static variable in class nxopen.preferences.SessionPdm.MessagesInconsistentRevisionsType
-
- NONE - Static variable in class nxopen.preferences.SessionPdm.SynchroniseOnLoadType
-
- NONE - Static variable in class nxopen.preferences.SessionPdm.SynchroniseOnSaveType
-
- NONE - Static variable in class nxopen.preferences.ViewVisualizationVisual.ShadedEdgeStyleType
-
- NONE - Static variable in class nxopen.routing.Corner.Type
-
No corner.
- NONE - Static variable in class nxopen.routing.CornerTypeBuilder.Type
-
- NONE - Static variable in class nxopen.routing.DuctReinforcementBuilder.ReinforcementTypes
-
- NONE - Static variable in class nxopen.routing.electrical.ConnectorDevice.Assign
-
- NONE - Static variable in class nxopen.routing.electrical.ConnectorDevice.ComponentType
-
- NONE - Static variable in class nxopen.routing.HandrailBuilder.PostTypes
-
- NONE - Static variable in class nxopen.routing.PathStockBuilder.AssignMethod
-
No Stock.
- NONE - Static variable in class nxopen.routing.Run.CompareStatus
-
Run has no compare status.
- NONE - Static variable in class nxopen.routing.StockStyle
-
No profile.
- NONE - Static variable in class nxopen.Scalar.DimensionalityType
-
- NONE - Static variable in class nxopen.Selection.DialogResponse
-
No Response
- NONE - Static variable in class nxopen.Session.ProjectAssignmentState
-
to remove project from all objects
- NONE - Static variable in class nxopen.sim.KinematicComponentBuilder.WorkPositionAngleTypes
-
no angle specified
- NONE - Static variable in class nxopen.sim.KinematicJunctionBuilder.SystemClass
-
no specal class
- NONE - Static variable in class nxopen.sim.SimDebugBuilder.DumpType
-
Dump Nothing
- NONE - Static variable in class nxopen.Sketch.AssocType
-
Use the entire geometric item, as opposed to a point
- NONE - Static variable in class nxopen.Sketch.ConstraintPointType
-
The geometry is not a point
- NONE - Static variable in class nxopen.Sketch.ConstraintVisibility
-
Deprecated.
No constraints visible
- NONE - Static variable in class nxopen.SurfaceRebuildData.Type
-
None
- NONE - Static variable in class nxopen.tooling.CompDrawingBuilder.DrawingType
-
without drawing
- NONE - Static variable in class nxopen.tooling.CoolingDefineChannelBuilder.TipEndTypes
-
No tip angle
- NONE - Static variable in class nxopen.tooling.CoolingExtendBuilder.TipEndTypes
-
No tip angle
- NONE - Static variable in class nxopen.tooling.DieEngStampingOutputBuilder.SpringbackMethodType
-
- NONE - Static variable in class nxopen.tooling.DieEngTrimTaskBuilder.TrimTaskMatchCutType
-
- NONE - Static variable in class nxopen.tooling.DirectUnfoldBuilder.BodyList
-
Default is none.
- NONE - Static variable in class nxopen.tooling.ElectrodeBlankBuilder.JointObject
-
nothing to do
- NONE - Static variable in class nxopen.tooling.InitProjectBuilder.MaterialId
-
None material is set
- NONE - Static variable in class nxopen.tooling.MWDesignPartingSurfaceBuilder.TrimAndExtendFromRegionType
-
New option for guided extension surface only
- NONE - Static variable in class nxopen.tooling.PiercingInsertBuilder.NormalBbpslugType
-
Bottom plate slug type is none
- NONE - Static variable in class nxopen.tooling.PiercingInsertBuilder.NormalDsslugType
-
Die shoe slug type is none
- NONE - Static variable in class nxopen.tooling.ReusableObjectPasteBuilder.PasteMethods
-
None
- NONE - Static variable in class nxopen.tooling.ReusablePocketBuilder.Hole
-
None
- NONE - Static variable in class nxopen.tooling.RunnerBuilder.GuideEndType
-
None of runner guide points for use.
- NONE - Static variable in class nxopen.uf.UFConstants
-
- NONE - Static variable in class nxopen.uf.UFGexp.Qualifier
-
- NONE - Static variable in class nxopen.uistyler.Attachment.AttachType
-
None type
- NONE - Static variable in class nxopen.Validation.MapType
-
map is not define
- NONE - Static variable in class nxopen.visualreporting.VisualReportExplorer.ReportDownStatus
-
There are no objects of interest below the specified objects
- NONE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- NONE - Static variable in class nxopen.weld.CharacteristicsValueBuilder.Type
-
Indicates there is no attribute value.
- NONE - Static variable in class nxopen.weld.FilletBuilder.EnumContour
-
- NONE - Static variable in class nxopen.weld.JointmarkPointsBuilder.PointPosition
-
None specifed.
- NONE - Static variable in class nxopen.weld.PlugSlotBuilder.EnumContour
-
- NONE - Static variable in class nxopen.weld.WeldGrooveBuilder.Contour
-
None
- NONE - Static variable in class nxopen.weld.WeldGrooveBuilder.Prepare
-
None
- NONE - Static variable in class nxopen.weld.WeldGroupIdColor
-
None group id color
- NONE - Static variable in class nxopen.weld.WeldJointBuilder.SplitTypes
-
No split.
- NONE - Static variable in class nxopen.weld.WeldObjectBuilder.CommandName
-
No command.
- NONE - Static variable in class nxopen.weld.WeldPointExitBuilder.CommandName
-
No command.
- NONE - Static variable in class nxopen.weld.WeldPointExitBuilder.MethodUsed
-
No method specified.
- NONE - Static variable in class nxopen.weld.WeldPointExtendMethod
-
Do not extend offset curves.
- NONE - Static variable in class nxopen.weld.WeldPointReferenceSheetType
-
spot welds are points in 3d space
- NONE - Static variable in class nxopen.weld.WeldPrepareEdges
-
Output edges will not be prepared
- NONE - Static variable in class nxopen.weld.WeldProjectionMethod
-
creates only a point
- NONE - Static variable in class nxopen.weld.WeldRootUpdate
-
Use user specified root opening
- NONE_TEXT_ABOVE_LEADER - Static variable in class nxopen.annotations.ChamferStubType
-
Specifies no stub and text above leader
- NONE_TEXT_AFTER_LEADER - Static variable in class nxopen.annotations.ChamferStubType
-
Specifies no stub and text after leader
- nonFacetedBodiesToConvert() - Method in interface nxopen.facet.FacetBodyFromBodyBuilder
-
Returns the input non-faceted bodies to convert
License requirements: None.
- nonGeometric() - Method in interface nxopen.assemblies.AssembliesGeneralPropertiesBuilder
-
Returns the non geometric flag.
- nonInflectingLaw() - Method in interface nxopen.geometricutilities.LawBuilder
-
Returns the non inflecting law.
- NonInflectingLawBuilder - Interface in nxopen.geometricutilities
-
Represents a non-inflecting law.
- NONLINEAR - Static variable in class nxopen.cae.BaseIteration.IterationType
-
NonLinear Analysis Iteration
- NONLINEAR_STRAIN - Static variable in class nxopen.cae.Result.Quantity
-
- NONLINEAR_STRESS - Static variable in class nxopen.cae.Result.Quantity
-
- nonlinearityCoefficient() - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder
-
Returns the nonlinearity coefficient used to determine the bending curve spacing.
- nonManifoldEdgeDisplayStyle() - Method in interface nxopen.cae.modelcheck.ElementEdgeCheckBuilder
-
Returns the displaying style for non-manifold edges detected
License requirements: None.
- nonmanifoldedges - Variable in class nxopen.cae.modelcheck.ElementEdgeCheckBuilder.ExecuteCheckData
-
non-manifold element edges
- nonManifoldEdges() - Method in interface nxopen.facet.CleanupFacetBodyBuilder
-
Returns the non manifold edges option
License requirements: None.
- nonManifoldVertices() - Method in interface nxopen.facet.CleanupFacetBodyBuilder
-
Returns the non manifold vertices option
License requirements: None.
- NONMASTER_STATE - Static variable in class nxopen.uf.UFClone.PartStateS
-
- nonmasterSaveAsOption() - Method in interface nxopen.pdm.PartFromPartBuilder
-
Returns the non-master parts to save during the save as operation
Deprecated in NX10 for "Save As of master parts" operation.
- nonmasterType - Variable in class nxopen.uf.UFClone.CopyNmOpt
-
- nonMovingGroupGrounded() - Method in interface nxopen.positioning.Network
-
Returns
the grounded state of non-moving_group objects.
- nonPathConnections() - Method in interface nxopen.routing.RouteManager
-
NonPathConnection collection .
- NonProportionalZoom - Interface in nxopen.display
-
- NonProportionalZoom.MethodType - Class in nxopen.display
-
Sets the kind of mouse interaction that will define the non-proportional zoom.
- nonSectionedHiddenColor() - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder
-
Returns the non-sectioned hidden color on the Ship Structure Lines
License requirements: None.
- nonSectionedHiddenFont() - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder
-
Returns the non-sectioned hidden font on the Ship Structure Lines
License requirements: None.
- nonSectionedHiddenWidth() - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder
-
Returns the non-sectioned hidden width on the Ship Structure Lines
License requirements: None.
- nonSectionedObjects() - Method in interface nxopen.drawings.BaseViewBuilder
-
Returns the list of objects to not section in the view
License requirements: None.
- nonSectionedObjects() - Method in interface nxopen.drawings.DetailViewBuilder
-
Returns the list of objects to not section in the view
License requirements: None.
- nonSectionedObjects() - Method in interface nxopen.drawings.ProjectedViewBuilder
-
Returns the list of objects to not section in the view
License requirements: None.
- nonSectionedObjects() - Method in interface nxopen.drawings.SectionViewBuilder
-
Returns the non sectioned objects
License requirements: None.
- nonSectionedObjects() - Method in interface nxopen.drawings.StandardViewsBuilder
-
Returns the list of objects to not section in the view
License requirements: None.
- nonSectionedVisibleColor() - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder
-
Returns the non-sectioned visible color on the Ship Structure Lines
License requirements: None.
- nonSectionedVisibleFont() - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder
-
Returns the non-sectioned visible font on the Ship Structure Lines
License requirements: None.
- nonSectionedVisibleWidth() - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder
-
Returns the non-sectioned visible width on the Ship Structure Lines
License requirements: None.
- nonSteepCutting() - Method in interface nxopen.cam.DmAmBuilder
-
Returns the Non-steep Cutting Builder
License requirements: None.
- nonSteepCutting() - Method in interface nxopen.cam.FlowBuilder
-
Returns the Non-steep Cutting Builder
License requirements: None.
- NONSYMMETRIC_OFFSET - Static variable in class nxopen.geometricutilities.Type
-
Offset with two different distances
- nonTiltLeadIn() - Method in interface nxopen.cam.NcmWedmBuilder
-
Returns the non_tilt_lead_in
License requirements: cam_base ("CAM BASE")
.
- NONUNIFORM - Static variable in class nxopen.features.StyledSweepBuilder.ScalingMethodOptions
-
Non-Uniform
- NonuniformGridSize() - Constructor for class nxopen.preferences.WorkPlane.NonuniformGridSize
-
- NonuniformGridSize(WorkPlane.GridSize, WorkPlane.GridSize) - Constructor for class nxopen.preferences.WorkPlane.NonuniformGridSize
-
Constructor for the NonuniformGridSize object.
- noOfAxes - Variable in class nxopen.uf.UFSim.AskNcAxesOfMtoolData
-
- noOfRoutedStockDevices - Variable in class nxopen.routing.electrical.ElectricalStockDeviceCollection.AutoRouteConnectionsData
-
- noparsedcontent - Variable in class nxopen.cae.SimLoadRecipe.ImportFromCSVFileData
-
True if no valid data could be parsed from the file.
- norm1 - Variable in class nxopen.uf.UFModl.DevchkEeInfo
-
- norm2 - Variable in class nxopen.uf.UFModl.DevchkEeInfo
-
- NORM_ERROR_MAXIMUM_STRAIN_ENERGY - Static variable in class nxopen.cae.Result.Quantity
-
- NORM_ERROR_MAXIMUM_STRESS - Static variable in class nxopen.cae.Result.Quantity
-
- NORM_ERROR_STRAIN_ENERGY - Static variable in class nxopen.cae.Result.Quantity
-
- NORM_ERROR_STRESS - Static variable in class nxopen.cae.Result.Quantity
-
- NORM_MAXIMUM_STRAIN_ENERGY - Static variable in class nxopen.cae.Result.Quantity
-
- NORM_MAXIMUM_STRESS - Static variable in class nxopen.cae.Result.Quantity
-
- NORM_STRAIN_ENERGY - Static variable in class nxopen.cae.Result.Quantity
-
- NORM_STRESS - Static variable in class nxopen.cae.Result.Quantity
-
- NORMAL - Static variable in class nxopen.annotations.AutomaticCenterlineBuilder.CenterlineThickness
-
normal
- NORMAL - Static variable in class nxopen.annotations.CenterlineSettingsBuilder.CenterlineThickness
-
Normal
- NORMAL - Static variable in class nxopen.annotations.EditSymbolDisplayBuilder.WidthTypes
-
Normal
- NORMAL - Static variable in class nxopen.annotations.IntersectionSymbolBuilder.Thickness
-
Normal
- NORMAL - Static variable in class nxopen.annotations.LineWidth
-
- NORMAL - Static variable in class nxopen.annotations.OffsetCenterPointBuilder.Thickness
-
normal
- NORMAL - Static variable in class nxopen.annotations.TargetPointBuilder.Thickness
-
Normal
- normal() - Method in interface nxopen.assemblies.PlaneSearchTermBuilder
-
Returns
the normal of the plane.
- NORMAL - Static variable in class nxopen.cae.LaminateGlobalLayup.StackingRecipeType
-
Normal
- NORMAL - Static variable in class nxopen.cae.ModelDisplayBuilder.FreeEdgeWidth
-
Normal
- NORMAL - Static variable in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeWidth
-
Normal
- NORMAL - Static variable in class nxopen.cae.optimization.TBSTopologySensitivityOptimizationParameters.DensityUpdate
-
Normal strategy
- NORMAL - Static variable in class nxopen.cae.Post.StreamlineLineWeight
-
- NORMAL - Static variable in class nxopen.cae.responsesimulation.SensorType
-
- NORMAL - Static variable in class nxopen.cam.OffsetDataBuilder.OffsetDirectionMethod
-
along normal
- NORMAL - Static variable in class nxopen.cam.ProbeInspectSurfacePointMoveBuilder.Direction
-
Inferred using surface normal
- NORMAL - Static variable in class nxopen.cam.ProbeInspectSurfacePointMoveBuilder.ToolAxis
-
Inferred using surface normal
- NORMAL - Static variable in class nxopen.cam.SimulationOptionsBuilder.Resolution
-
use normal resolution
- NORMAL - Static variable in class nxopen.DatumConstraint.Solution
-
- normal() - Method in interface nxopen.DatumPlane
-
Returns the normal of the datum plane
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
.
- NORMAL - Static variable in class nxopen.display.GridBuilder.LineWeightType
-
- NORMAL - Static variable in class nxopen.display.TransientText.TextSize
-
- NORMAL - Static variable in class nxopen.DisplayableObject.ObjectWidth
-
- NORMAL - Static variable in class nxopen.drawings.DrawingCompareSettingsBuilder.WidthType
-
Normal
- NORMAL - Static variable in class nxopen.drawings.SectionLineStyleBuilder.WidthStyle
-
Deprecated.
Normal
- NORMAL - Static variable in class nxopen.features.AssociativeLineBuilder.EndOption
-
Normal
- NORMAL - Static variable in class nxopen.features.AssociativeLineBuilder.StartOption
-
Normal
- NORMAL - Static variable in class nxopen.features.DatumAxisBuilder.AlternateSolution
-
Datum axis at normal to curve
- NORMAL - Static variable in class nxopen.features.DatumAxisBuilder.CurveOrientations
-
Orientation at normal to curve
- NORMAL - Static variable in class nxopen.features.DatumPlaneBuilder.AlternateSolution
-
Datum plane at normal to curve
- NORMAL - Static variable in class nxopen.features.EdgeSymmetryBuilder.MovementMethods
-
Does a normal match
- NORMAL - Static variable in class nxopen.features.EmbossJoggle.JoggleDirectionMethod
-
Indicates joggle direction to along normal of target.
- NORMAL - Static variable in class nxopen.features.EmbossSidewall.SidewallMethod
-
Indicates method to calculate tapered sidewall faces with reference to the taper direction and the normal of the taper faces' original surfaces.
- NORMAL - Static variable in class nxopen.features.FitCurveBuilder.ProjectionDirectionOptions
-
Face normal
- NORMAL - Static variable in class nxopen.features.GeometricConstraintData.ParameterDirection
-
Normal
- NORMAL - Static variable in class nxopen.features.GuidedExtensionBuilderEx.SegmentType
-
Normal segment type
- NORMAL - Static variable in class nxopen.features.MatchEdgeBuilder.PoleMovementConstraintEnumType
-
Normal
- NORMAL - Static variable in class nxopen.features.MeshSurfaceBuilder.ConstraintDirection
-
Normal
- NORMAL - Static variable in class nxopen.features.MeshTransformerBuilder.SmoothingType
-
Smoothing normal
- NORMAL - Static variable in class nxopen.features.sheetmetal.SheetmetalManagerTabSweepDir
-
Tab sweep direction along normal direction
- NORMAL - Static variable in class nxopen.features.ShelfBuilder.StepMethod
-
- NORMAL - Static variable in class nxopen.features.shipdesign.ProfileCutoutBuilder.Orientation
-
normal
- NORMAL - Static variable in class nxopen.features.StepBuilder.StepFaceMethods
-
Orients the step face normal to the stationary face
- NORMAL - Static variable in class nxopen.features.StepBuilder.StepWallMethods
-
Orients the step-wall face normal to the input face
- NORMAL - Static variable in class nxopen.features.StudioSplineBuilderEx.MovementMethodType
-
Movement along a face normal
- NORMAL - Static variable in class nxopen.features.StudioXformBuilderEx.MovementMethodType
-
Translate in normal direction
- NORMAL - Static variable in class nxopen.features.subdivision.TransformCageData.MovementMethodType
-
Movement along a face normal
- NORMAL - Static variable in class nxopen.features.ThroughCurveMeshBuilder.ConstructionMethod
-
Use the standard procedures.
- NORMAL - Static variable in class nxopen.features.ThroughCurvesBuilder.ConstructionMethod
-
Use the standard procedures.
- NORMAL - Static variable in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Width
-
normal Width
- NORMAL - Static variable in class nxopen.fields.DisplayPropertiesBuilder.IndepDomDispType
-
- NORMAL - Static variable in class nxopen.fields.DisplayPropertiesBuilder.LineWidthEnum
-
Normal
- NORMAL - Static variable in class nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder.CurvatureTypes
-
Normal
- normal - Variable in class nxopen.geometricanalysis.GeometricProperties.CaeCurve
-
normal of closest point in Root Part Coordinates
- normal - Variable in class nxopen.geometricanalysis.GeometricProperties.CaeFace
-
normal at the closest point in Root Part Coordinates
- normal - Variable in class nxopen.geometricanalysis.GeometricProperties.Edge
-
Curve Normal in Root Part coordinates
- normal - Variable in class nxopen.geometricanalysis.GeometricProperties.Face
-
Unitized Face Normal - Root Part Coordinates
- NORMAL - Static variable in class nxopen.geometricanalysis.SurfaceIntersectionBuilder.ProjectionTypes
-
face normal
- NORMAL - Static variable in class nxopen.geometricutilities.CurveShapingBuilder.MovementMethodType
-
Movement along a face normal
- NORMAL - Static variable in class nxopen.geometricutilities.MovePoleBuilder.MoveMethodType
-
- NORMAL - Static variable in class nxopen.geometricutilities.SpinePointData.ParameterType
-
- normal() - Method in interface nxopen.IPlane
-
Returns the normal of the plane
License requirements: None.
- NORMAL - Static variable in class nxopen.motion.MotionSolutionBuilder.SolutionTypes
-
Normal run
- NORMAL - Static variable in class nxopen.optimization.DesignStudyBuilder.DesignStudyDistributeType
-
Normal distribution type
- NORMAL - Static variable in class nxopen.PlaneTypes.FrenetSubtype
-
Normal to path, = FRENET_NORMAL
- NORMAL - Static variable in class nxopen.preferences.PartDrafting.WidthType
-
Normal
- NORMAL - Static variable in class nxopen.preferences.PartVisualizationEmphasis.EdgesType
-
Displays edges for de-emphasized shaded geometry if
edges are normally displayed for shaded geometry.
- NORMAL - Static variable in class nxopen.preferences.RoutingPartLibrary.NodeType
-
Normal node, may contain part table children.
- NORMAL - Static variable in class nxopen.preferences.SessionVisualizationShade.SeeThruEdgesType
-
Deprecated.
Displays edges for less important shaded geometry if edges
are normally displayed for shaded geometry.
- NORMAL - Static variable in class nxopen.preferences.SessionWorkPlane.ObjectDisplay
-
Deprecated.
Normal Display
- NORMAL - Static variable in class nxopen.preferences.ViewVisualizationVisual.SmoothEdgeWidth
-
- NORMAL - Static variable in class nxopen.preferences.Width
-
Normal
- NORMAL - Static variable in class nxopen.routing.StockOffsetPointBuilder.PointType
-
Normal smart point.
- NORMAL - Static variable in class nxopen.Sketch.ConstraintType
-
- NORMAL - Static variable in class nxopen.SketchG1Constraint.SlopeType
-
The slope geometry is normal to spline
- NORMAL - Static variable in class nxopen.tooling.ForceCalculationBuilder.CalculationTypes
-
calculate force considering pre-stations effects
- NORMAL - Static variable in class nxopen.tooling.GuidedExtensionBuilder.SegmentType
-
Normal segment type
- NORMAL - Static variable in class nxopen.tooling.MWDesignGuideLinesBuilder.DirectionType
-
Normal
- normal - Variable in class nxopen.uf.UFCam.AskClearPlaneData
-
- normal - Variable in class nxopen.uf.UFCam.AskLowerLimitPlaneData
-
- NORMAL - Static variable in class nxopen.uf.UFCurve.ConstraintType
-
- NORMAL - Static variable in class nxopen.uf.UFDrf.LineWidth
-
- normal - Variable in class nxopen.uf.UFEval.EvaluateUnitVectorsData
-
- normal - Variable in class nxopen.uf.UFModlFeatures.AskDatumAxisParmsData
-
- normal - Variable in class nxopen.uf.UFModlFeatures.AskDatumPlaneParmsData
-
- NORMAL - Static variable in class nxopen.uf.UFSket.ConType
-
- NORMAL - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.TextSize
-
- NORMAL - Static variable in class nxopen.ViewDependentDisplayManager.Width
-
- NORMAL_AND_UP_VECTOR - Static variable in class nxopen.display.CgfxMattexBuilder.UseCameraDirectionPlane
-
Deprecated.
both normal and up vectors are updated based on camera direction
- NORMAL_DIRECTION - Static variable in class nxopen.features.sheetmetal.FlexibleCableBuilder.BendAngleDirectionOptions
-
Bend angle normal direction.
- NORMAL_DISPLAY_TYPE - Static variable in class nxopen.uf.UFGdt.LimitsAndFitsDisplayType
-
- NORMAL_DRAFT - Static variable in class nxopen.features.SilhouetteFlangeBuilder.ReferenceDirectionOptions
-
Create flange along silhouette curve and face normal
- NORMAL_OFFSET - Static variable in class nxopen.ExtrudeOffsetDataOffsetType
-
Offset with two different distances
- NORMAL_STRESS - Static variable in class nxopen.cae.LaminatePly.InterLaminarFailureTheoryType
-
Normal Stress inter-laminar failure criteria
- NORMAL_TO_ALL_SECTIONS - Static variable in class nxopen.features.StudioSurfaceBuilder.TransitionOptions
-
Normal to All Sections
- NORMAL_TO_BASE - Static variable in class nxopen.features.GlobalShapingBuilder.DirectionMethodType
-
Overcrown is normal to base surface
- NORMAL_TO_BODY - Static variable in class nxopen.weld.EasyPatternBuilder.HemMethodTypes
-
Use Normal to Body Method.
- NORMAL_TO_BODY - Static variable in class nxopen.weld.WeldSpacingCalcMethod
-
spaces based on normal to body
- NORMAL_TO_CONTROL - Static variable in class nxopen.features.GlobalShapingBuilder.DirectionMethodType
-
Overcrown is normal to control surface
- NORMAL_TO_CURVE - Static variable in class nxopen.cam.TurnProbeInspectPointMoveBuilder.DirectionTypes
-
Normal to curve
- NORMAL_TO_CURVE - Static variable in class nxopen.features.AOCSBuilder.OffsetDirection
-
traditional curve normal
- NORMAL_TO_CURVE - Static variable in class nxopen.features.shipdesign.StiffenerBySupportPathBuilder.Method
-
Normal to Curve
- NORMAL_TO_DRIVE - Static variable in class nxopen.cam.ToolAxisVariable.Types
-
Normal to Drive
- NORMAL_TO_END_SECTIONS - Static variable in class nxopen.features.StudioSurfaceBuilder.TransitionOptions
-
Normal to End Sections
- NORMAL_TO_FACE - Static variable in class nxopen.geometricutilities.PatternOrientation.ProjDirEnum
-
project along face normal.
- NORMAL_TO_FIRST_FACE - Static variable in class nxopen.cam.PmopToolAxisCiBuilder.ToolAxisTypes
-
Normal To First Face
- NORMAL_TO_FIRST_FACE - Static variable in class nxopen.cam.ToolAxisFixed.Types
-
Normal To First Face
- NORMAL_TO_PART - Static variable in class nxopen.cam.LaserHeadOrientation.Types
-
Normal to Part
- NORMAL_TO_PART - Static variable in class nxopen.cam.PmopToolAxisCiBuilder.ToolAxisTypes
-
Normal To Floor Face
- NORMAL_TO_PART - Static variable in class nxopen.cam.ToolAxisFixed.Types
-
Normal To Floor Face
- NORMAL_TO_PART - Static variable in class nxopen.cam.ToolAxisVariable.Types
-
Normal to Part
- NORMAL_TO_PATH - Static variable in class nxopen.geometricutilities.PatternOrientation.Enum
-
normal to path orientation for Along Type first direction.
- NORMAL_TO_PATH - Static variable in class nxopen.SketchAlongPathBuilder.PlaneOrientationType
-
Normal to Path
- NORMAL_TO_PLACEMENT_FACE - Static variable in class nxopen.die.DrawBeadBuilder.ProjectionDirectionTypes
-
Project the centerline along the placement face normal.
- NORMAL_TO_PLANE - Static variable in class nxopen.cam.LowerLimit.ActionTypes
-
normal to plane
- NORMAL_TO_SHEET - Static variable in class nxopen.features.GlobalShapingBuilder.DirectionMethodType
-
Overcrown is normal to sheet
- NORMAL_TO_SOURCE_FACE - Static variable in class nxopen.features.sheetmetal.MiterOptions.TypeOptions
-
mitering is done along the normal to source face
- NORMAL_TO_SURFACE - Static variable in class nxopen.features.shipdesign.OrientationRegionItemBuilder.OrientationMethodTypes
-
The web of the profile is aligned normal to the placement surface.
- NORMAL_TO_THICKNESS_FACE - Static variable in class nxopen.features.sheetmetal.MiterOptions.TypeOptions
-
mitering is done along the normal to thickness face
- NORMAL_TO_VECTOR - Static variable in class nxopen.features.AOCSBuilder.OffsetDirection
-
offset pependicular to vector
- NORMAL_TO_VECTOR - Static variable in class nxopen.geometricutilities.PatternOrientation.Enum
-
normal to vector orientation for Along Type first direction.
- NORMAL_TO_VECTOR - Static variable in class nxopen.PlaneTypes.FrenetSubtype
-
Normal to a vector
- NORMAL_TO_VECTOR - Static variable in class nxopen.SketchAlongPathBuilder.PlaneOrientationType
-
Normal to Vector
- NORMAL_TYPE - Static variable in class nxopen.tooling.ScrapDesignBuilder.OvercutType
-
Creates normal type of overcut
- NORMAL_VECTOR - Static variable in class nxopen.display.CgfxMattexBuilder.UseCameraDirectionPlane
-
Deprecated.
normal vector is updated based on camera direction
- NORMAL_WIDTH - Static variable in class nxopen.preferences.PartObject.WidthType
-
Normal Width
- normalBbpslug() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the bottom plate slug type for normal pierce design.
- normalCavity() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the cavity type for normal pierce design.
- normalClearance() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the clearance value for normal pierce design.
- normalClearanceOption() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the clearance option for normal pierce design.
- normalCorner() - Method in interface nxopen.cam.TurnCutParameters
-
Returns the normal corners
License requirements: cam_base ("CAM BASE")
.
- normalCreateCavityAndSlug() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Create cavity and slug for normal pierce design.
- normalCreateUdp() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Create user defined punch for normal pierce design.
- NormalCutout - Interface in nxopen.features
-
Represents a Normal Cutout feature
To create or edit an instance of this class, use
NormalCutoutBuilder
Created in NX5.0.0
- NormalCutoutBuilder - Interface in nxopen.features.sheetmetal
-
Represents a NormalCutout feature builder.
- NormalCutoutBuilder.CutTypeOptions - Class in nxopen.features.sheetmetal
-
This enum represents the cut type for the normal cutout.
- NormalCutoutBuilder.DepthSideOptions - Class in nxopen.features.sheetmetal
-
This enum represents the depth direction for the normal cutout.
- NormalCutoutBuilder.DepthTypeOptions - Class in nxopen.features.sheetmetal
-
This enum represents the depth type for the normal cutout.
- NormalCutoutBuilder.SectionSideOptions - Class in nxopen.features.sheetmetal
-
This enum represents the side of the section that the normal cutout removes material.
- NormalCutoutBuilder.TypeOptions - Class in nxopen.features.sheetmetal
-
Represents the type of the normal cutout - sketch type OR 3D-curve type
- normalDir() - Method in interface nxopen.features.shipdesign.DeckListItemBuilder
-
Returns the normal dir.
- normalDirection() - Method in interface nxopen.annotations.LocatorDesignatorBuilder
-
Returns the normal direction
License requirements: None.
- normalDirection() - Method in interface nxopen.drawings.OvtBuilder
-
Returns the vector that represents the normal direction for the view to be created or edited
License requirements: drafting ("DRAFTING")
.
- normalDirection() - Method in interface nxopen.drawings.ProjectedViewOrientationBuilder
-
Returns the xform that represents the orthographic projected view settings to be edited
License requirements: None.
- normalDirection() - Method in interface nxopen.drawings.SvtBuilder
-
Returns the vector that represents the normal direction for the view to be created or edited.
- normalDsslug() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the die shoe slug type for normal pierce design.
- normalFaceList() - Method in interface nxopen.geometricutilities.OrientationMethodBuilder
-
Returns the normal face list.
- normalForce() - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
Returns the normal force.
- normalForEachScrap1() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the each scrap option of bottom plate slug for normal pierce design.
- normalForEachScrap2() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the each scrap option of die shoe slug for normal pierce design.
- normalInWcs - Variable in class nxopen.geometricanalysis.GeometricProperties.CaeCurve
-
normal of closest point in Work Part Coordinates
- normalInWcs - Variable in class nxopen.geometricanalysis.GeometricProperties.CaeFace
-
normal in Work Part Coordinates
- normalInWcs - Variable in class nxopen.geometricanalysis.GeometricProperties.Edge
-
Curve Normal in Work Part coordinates
- normalInWcs - Variable in class nxopen.geometricanalysis.GeometricProperties.Face
-
Unitized Face Normal - Work Part Coordinates
- normalizeResults() - Method in interface nxopen.cae.responsesimulation.FrequencyDefinition
-
Returns the option to normalize results.
- normalList - Variable in class nxopen.uf.UFDisp.J3dEntity
-
- normalLoadDie() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Load standard die insert for normal pierce design.
- normalLoadStandardPunch() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Load standard punch for normal pierce design.
- NormalMode - Interface in nxopen.cae.responsesimulation
-
Represents the properties of one normal mode .
- normalModeCount() - Method in interface nxopen.motion.FlexBody
-
Returns the count of normal modes
License requirements: mechanisms ("MECHANISMS")
.
- NormalModeProperty - Interface in nxopen.motion
-
Represents the properties of one normal mode .
- normalOffsetSide() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the offset side option for normal pierce design.
- normalOnePunchToggle() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the one punch option for normal pierce design.
- normalOption() - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder
-
Returns the normal for the case of normal curvature type.
- normalOrientation() - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder
-
Returns the normal orientation when the normal curvature values are to be computed and displayed.
- normalOrigin() - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder
-
Returns the normal origin when normal curvature values are to be computed and displayed.
- normalPunchLength() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the punch length for normal pierce design.
- normalRenameDialog() - Method in interface nxopen.tooling.GeneralInsertBuilder
-
Returns the normal rename dialog
License requirements: None.
- normalRenameDialog() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the rename dialog option for normal pierce design.
- normals - Variable in class nxopen.DisplayManager.J3dGeometryData
-
polygon normals
- normals - Variable in class nxopen.uf.UFFacet.AskNormalsOfFacetData
-
- normals - Variable in class nxopen.uf.UFSf.MeshVisuals
-
- normalsColor() - Method in interface nxopen.cae.MeshCollectorDisplayDefaults2d
-
Returns the element normals color.
- normalsColor() - Method in interface nxopen.cae.MeshDisplaySettings2d
-
Returns the element normals color.
- normalsColor - Variable in class nxopen.uf.UFSf.MeshVisuals
-
- normalSelectPierceDieInsert() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the select pierce die insert to be edited.
- normalSelectPiercePunch() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the select pierce punch insert to be edited.
- normalSlugPara1() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the H value of slug hole for normal pierce design.
- normalSlugPara2() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the A value of slug hole for normal pierce design.
- normalSlugPara3() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the C1 value of slug hole for normal pierce design.
- normalSlugPara4() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the C2 value of slug hole for normal pierce design.
- NORMALTO_CURVE - Static variable in class nxopen.features.shipdesign.OrientationDefinitionBuilder.MeasureAngleTypes
-
Angles are measured in a plane normal to the landing curve.
- NORMALTO_CYLINDRICAL_FACE - Static variable in class nxopen.features.SweptVolumeBuilder.SweepOrient
-
Normal to Cylindrical Face
- NORMALTO_PATH - Static variable in class nxopen.features.SweptVolumeBuilder.SweepOrient
-
Normal to Path
- NORMALTO_PLANE - Static variable in class nxopen.features.shipdesign.StiffenerSystemBuilder.MeasureAlongModes
-
- NORMALTOCONTACTEDGE - Static variable in class nxopen.cae.ContactMeshBuilder.AlignmentType
-
- normalToEndSections() - Method in interface nxopen.features.MeshSurfaceBuilder
-
Returns the normal to end sections for Through Curves surface.
- normalToEndSections() - Method in interface nxopen.features.ThroughCurvesBuilder
-
Returns the option of normal to end sections for Through Curves surface, which makes the output surface
normal to the two end sections.If an end section is planar, the surface will be parallel to the plane
normal at the end.If an end section is a 3D curve, an average normal vector will be computed, and the
surface will be parallel to the average normal at the end.
- NormalToToolAxisMoveBuilder - Interface in nxopen.cam
-
- NormalToToolAxisMoveBuilder.Orientation - Class in nxopen.cam
-
the normal orientation
- normalVector() - Method in interface nxopen.display.DecalBuilder
-
Returns the decal normal vector
License requirements: None.
- normalVector() - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder
-
Returns the normal vector for the case when normal curvature values are to be computed and displayed.
- normalVector - Variable in class nxopen.uf.UFDisp.TextureSpaceInfo
-
- normalVectorValue() - Method in interface nxopen.display.DecalBuilder
-
Returns the decal normal vector value
License requirements: None.
- normalWidth() - Method in interface nxopen.PrintBuilder
-
Returns the normal width scale factor.
- normAngle - Variable in class nxopen.uf.UFModl.DevchkEeInfo
-
- normDir - Variable in class nxopen.uf.UFModeling.AskFaceData
-
- normParameter - Variable in class nxopen.uf.UFRoute.AskSegmentEndPropsData
-
- NORTH_AMERICAN - Static variable in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.StandardType
-
North american standard
- noseAngle() - Method in interface nxopen.annotations.HoleTableSettingsHoleFiltersBuilder
-
Returns the nose angle
License requirements: None.
- noseAngle - Variable in class nxopen.cam.FormEdgesBuilder.Data
-
the nose angle
- noseAngleBuilder() - Method in interface nxopen.cam.TurnToolBuilder
-
Returns the nose angle builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- noseRadius - Variable in class nxopen.cam.FormEdgesBuilder.Data
-
the nose radius
- noseRadiusBuilder() - Method in interface nxopen.cam.TurningToolBuilder
-
Returns the nose radius builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- noseWidthBuilder() - Method in interface nxopen.cam.TurningToolBuilder
-
Returns the nose width builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- NOT - Static variable in class nxopen.mechatronics.GanttOperationParameterBuilder.OperatorOption
-
Not operator
- NOT_A_NORMAL_POINT - Static variable in class nxopen.uf.UFConstants
-
- NOT_ABORTED - Static variable in class nxopen.assemblies.ClearanceSet.JobStatus
-
- NOT_ALLOWED - Static variable in class nxopen.features.shipdesign.ProfileTransitionBuilder.MisalignedModeType
-
Ignore misaligned profiles.
- NOT_APPLICABLE - Static variable in class nxopen.cae.Result.Section
-
- NOT_APPLY - Static variable in class nxopen.cae.modelcheck.TestValueTypes.Result
-
indicates the test is not available or not done for an element
- NOT_ASCENE_LIGHT - Static variable in class nxopen.Light.SceneType
-
The light is not a scene light
- NOT_ASSIGNED - Static variable in class nxopen.assemblies.CollaborativeContentType
-
Non-collaborative content such as items
- NOT_ASSIGNED - Static variable in class nxopen.BasePart.CollaborativeContentType
-
Non-collaborative content such as items
- NOT_ATTEMPTED - Static variable in class nxopen.assemblies.ClearanceSet.PenetrationDepthResult
-
- NOT_BROKEN - Static variable in class nxopen.assemblies.RelinkerBuilder.LinkType
-
Indicate relink browser type is not broken only
- NOT_BUNDLED - Static variable in class nxopen.routing.StockDataType
-
Not generated (or used ) by bundling.
- NOT_CHANGED - Static variable in class nxopen.positioning.Network.ObjectStatus
-
Not evaluated because other parts of the model are over defined or inconsistent.
- NOT_CONDITION - Static variable in class nxopen.visualreporting.Condition.TypeOption
-
- NOT_CONSISTENT_DIMS - Static variable in class nxopen.positioning.Constraint.SolverStatus
-
Cannot solve with current dimension values.
- NOT_CONSISTENT_DIMS - Static variable in class nxopen.positioning.Network.ObjectStatus
-
Cannot solve with current dimension values.
- NOT_CONSISTENT_OTHER - Static variable in class nxopen.positioning.Constraint.SolverStatus
-
Cannot find a solution.
- NOT_CONSISTENT_OTHER - Static variable in class nxopen.positioning.Network.ObjectStatus
-
Cannot find a solution.
- NOT_CONSISTENT_UNKNOWN - Static variable in class nxopen.positioning.Constraint.SolverStatus
-
Cannot find a solution
- NOT_CONSISTENT_UNKNOWN - Static variable in class nxopen.positioning.Network.ObjectStatus
-
One movable object fixed.
- NOT_CONSTRAINT - Static variable in class nxopen.Sketch.ConstraintClass
-
- NOT_CONVERTED - Static variable in class nxopen.routing.ConvertEccentricLinearToLinear
-
Is not converted Eccentric linear to linear
- NOT_CONVERTED - Static variable in class nxopen.routing.ConvertLinearToEccentricLinear
-
Is not converted linear to Eccentric linear
- NOT_DELAYED - Static variable in class nxopen.uf.UFWave.DelayStatus
-
- NOT_ECCENTRIC_SEG - Static variable in class nxopen.routing.Eccentric
-
Is not a eccentric segment
- NOT_EDGE_DENSITY_DEFINED - Static variable in class nxopen.uf.UFSf.EdgeDensityType
-
- NOT_ENTITY_ID - Static variable in class nxopen.uf.UFConstants
-
- NOT_EQUAL - Static variable in class nxopen.validate.RequirementBuilder.RelationalOperatorOptions
-
- NOT_EQUAL_OPERATOR - Static variable in class nxopen.visualreporting.Condition.OperatorOption
-
- NOT_EVALUATED - Static variable in class nxopen.Sketch.Status
-
- NOT_EVALUATED - Static variable in class nxopen.uf.UFSket.Status
-
- NOT_FLIPPED - Static variable in class nxopen.routing.Flip
-
Profile is not flipped.
- NOT_FOUND_CONFLICT - Static variable in class nxopen.mechatronics.ComparisonResult.Category
-
Conflict due to the original logical object was deleted
- NOT_FREED - Static variable in class nxopen.tooling.MWPartingManagerBuilder.DataStatus
-
Data not freed yet.
- NOT_GREATER_THAN_OPERATOR - Static variable in class nxopen.visualreporting.Condition.OperatorOption
-
- NOT_HIDDEN - Static variable in class nxopen.preferences.RoutingPartLibrary.ColumnStatus
-
Column is displayed in Specify Item.
- NOT_IDENTICAL - Static variable in class nxopen.uf.UFSf.FaceSubdivStatus
-
- NOT_IN_ASSEMBLY_DELAYED - Static variable in class nxopen.uf.UFWave.DelayStatus
-
- NOT_INTERIOR_TO_PART - Static variable in class nxopen.routing.Interior
-
Is not interior to any part
- NOT_LESS_THAN_OPERATOR - Static variable in class nxopen.visualreporting.Condition.OperatorOption
-
- NOT_LINEAR_EDGE - Static variable in class nxopen.uf.UFConstants
-
- NOT_LOADED - Static variable in class nxopen.uf.UFWeight.ExceptionReason
-
- NOT_OUTBOARD - Static variable in class nxopen.features.vehicledesign.SeatBeltAnchorageBuilder.SeatPositionTypes
-
non-outboard
- NOT_PLANAR - Static variable in class nxopen.features.SketchConversionStatus.ReasonType
-
This feature cannot be converted into an independent sketch.
- NOT_PLANER_FACE - Static variable in class nxopen.uf.UFConstants
-
- NOT_PREPARED - Static variable in class nxopen.weld.WeldGrooveBuilder.Edge
-
Not Prepared
- NOT_REQUIRED - Static variable in class nxopen.features.shipdesign.PenetrationRequest.CompensationType
-
- NOT_ROT_FACE - Static variable in class nxopen.uf.UFConstants
-
- NOT_SAVED - Static variable in class nxopen.weld.ConnectionFinderBuilder.FilterTypes
-
- NOT_SET_DISPLAY_PART - Static variable in class nxopen.shapesearch.ShapeSearchBuilder.OpenPartType
-
Not set the opened part as display part
- NOT_SHADED - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.ViewMode
-
The view is not shaded
- NOT_SOLVED - Static variable in class nxopen.positioning.Constraint.SolverStatus
-
Not evaluated because other parts of the model are over defined or inconsistent
- NOT_SPECIFIED - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSymbolType
-
- NOT_SPECIFIED - Static variable in class nxopen.annotations.Symbol
-
Specifies weld symbol not specified
- NOT_SPECIFIED - Static variable in class nxopen.features.NSidedSurfaceBuilder.FlowDirectionType
-
not specified
- NOT_SPECIFIED - Static variable in class nxopen.features.SectionSurfaceBuilder.FlowDirectionEnum
-
Deprecated.
flow direction not specified
- NOT_SPECIFIED - Static variable in class nxopen.features.SectionSurfaceBuilderEx.SpineEndFlowType
-
flow direction not specified
- NOT_SPECIFIED - Static variable in class nxopen.features.SectionSurfaceBuilderEx.SpineStartFlowType
-
flow direction not specified
- NOT_SPECIFIED - Static variable in class nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder.MeasurementMethodType
-
- NOT_SPECIFIED - Static variable in class nxopen.PlaneTypes.FrenetSubtype
-
Subtype is not specified
- NOT_SUPPORT_ASSEM_TYPE - Static variable in class nxopen.uf.UFSf.AssemblyType
-
- NOT_TERMINAL_SEG - Static variable in class nxopen.routing.Terminal
-
Is not a terminal segment
- NOT_TO_CENTER - Static variable in class nxopen.annotations.RadiusDimensionType
-
Radius dimension not to center
- NOT_TO_SCALE - Static variable in class nxopen.annotations.SearchCriteriaDimensionBuilder.ToleranceTypes
-
NotToScale
- NOT_TO_SCALE - Static variable in class nxopen.annotations.ToleranceType
-
xxx
---
- NOT_TO_SCALE_TOL - Static variable in class nxopen.uf.UFDrf.ToleranceType
-
- NOT_TWO_PORTS - Static variable in class nxopen.routing.Run.FlipStatus
-
Given component ports are not equal to two ports.
- NOT_USED - Static variable in class nxopen.assemblies.DegreesOfFreedomStatus
-
The field is not used.
- NOT_USER_DEFINED - Static variable in class nxopen.routing.UserDefined
-
System generated segment.
- NOT_VALID_CLASS - Static variable in class nxopen.uf.UFConstants
-
- NOT_VALID_CONSTRAINTS - Static variable in class nxopen.uf.UFConstants
-
- NOT_VIEW_SPECIFIED - Static variable in class nxopen.uf.UFDraw.CompSectionInView
-
- NOTCH - Static variable in class nxopen.features.DeleteFaceBuilder.FaceEdgeBlendPreferenceOptions
-
Delete as notch blend.
- NOTCH - Static variable in class nxopen.features.FaceBlendBuilder.OverflowMethod
-
Notch or Maintain Blend And Move Sharp Edges option
- NOTCH - Static variable in class nxopen.features.PatchOpeningsBuilder.Types
-
Notch fill method
- notchAngle() - Method in interface nxopen.die.ClampingSlotBuilder
-
Returns the angle of the notch with respect to the base of the pad
License requirements: None.
- notchFacesAttributes() - Method in interface nxopen.die.ClampingSlotBuilder
-
Returns the attributes for the notch faces
License requirements: None.
- notchFactor() - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
Returns the notch factor.
- notchHeight() - Method in interface nxopen.die.ClampingSlotBuilder
-
Returns the height of the notch on the pad from the base
License requirements: None.
- notchOverflow - Variable in class nxopen.uf.UFModl.EdgeBlendData
-
- notchOverflow - Variable in class nxopen.uf.UFModl.EdgeBlendMultData
-
- notchWidth() - Method in interface nxopen.die.ClampingSlotBuilder
-
Returns the width from the center of the slot to the outer edge of the notch
License requirements: None.
- notDisplayedDelayed - Variable in class nxopen.PartDelayedUpdateStatus.DelayStatusInfo
-
The part is delayed because it's not in
the displayed assembly.
- Note - Interface in nxopen.annotations
-
Represents a Note
To create or edit an instance of this class, use
DraftingNoteBuilder
Created in NX3.0.0
- NOTE - Static variable in class nxopen.annotations.PmiFilterByType.Type
-
Indicates a PMI note type
- NOTE - Static variable in class nxopen.annotations.SearchModelViewBuilder.PmiTypes
-
note type
- NOTE - Static variable in class nxopen.cae.xyplot.TextType
-
Note label
- note() - Method in interface nxopen.drafting.SpecifyRuleBuilder
-
Returns the note to add rule to
License requirements: None.
- NOTE - Static variable in class nxopen.drawings.DetailViewBuilder.LabelOnParentType
-
Circular with a note
- NOTE - Static variable in class nxopen.drawings.ViewDetailLabelBuilder.LabelParentDisplayTypes
-
- NOTE - Static variable in class nxopen.issue.IssueProperty.Type
-
Note type
- NOTE - Static variable in class nxopen.PrintBuilder.PaperSize
-
Note, 8 1/2- by 11-inches
- NoteBase - Interface in nxopen.annotations
-
Represents a base class for notes and labels
This is an abstract class
.
- NoteCollection - Interface in nxopen.annotations
-
Represents a collection of notes
To obtain an instance of this class, refer to
Part
Created in NX3.0.0
- noteCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
Returns the note compare
License requirements: None.
- NoteData - Interface in nxopen.annotations
-
Represents note data .
- noteLeaderTerminatorCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
Returns the note leader info compare
License requirements: None.
- noteList() - Method in interface nxopen.annotations.MasterSymbolBuilder
-
Returns the note list
License requirements: None.
- noteOriginCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
Returns the note origin compare
License requirements: None.
- noteRetainedStatusCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
Returns the note retained status compare
License requirements: None.
- noteRule() - Method in interface nxopen.drafting.RulesBuilder
-
Returns the note rule
License requirements: None.
- Notes - Interface in nxopen.cam
-
Represents notes .
- notes() - Method in interface nxopen.cam.ObjectNotes
-
Returns the notes
License requirements: cam_base ("CAM BASE")
.
- notes() - Method in interface nxopen.cam.OperationBuilder
-
Returns the notes builder
License requirements: None.
- notes() - Method in interface nxopen.Part
-
Returns a collection of notes .
- noteTag - Variable in class nxopen.uf.UFDrf.CustomSymbolText
-
- noteTags - Variable in class nxopen.uf.UFDraw.AskViewNotesData
-
- noteText() - Method in interface nxopen.annotations.LocatorDesignatorBuilder
-
Returns the notetext
License requirements: None.
- noteText() - Method in interface nxopen.annotations.MasterSymbolListItemBuilder
-
Returns the first line of note text
License requirements: None.
- noteTextCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
Returns the note text compare
License requirements: None.
- noteTitle() - Method in interface nxopen.annotations.MasterSymbolListItemBuilder
-
Returns the note title
License requirements: None.
- NOTHING - Static variable in class nxopen.sim.SinumerikCaSimplifyBodiesBuilder.ObjectToReplaceWithTypes
-
Nothing
- NOTHING_FIXED - Static variable in class nxopen.positioning.ComponentConstraint.DirectionToFixed
-
The network does not contain any fixed geometry
- NOTIFY - Static variable in class nxopen.preferences.PartDrafting.UpdateViewWithoutLwDataOption
-
Notify
- notifyNodeSelectedPostCallback(Explorer, int) - Method in interface nxopen.blockstyler.Explorer.NotifyNodeSelectedPostCallback
-
The NotifyNodeSelectedPost callback notifies a client after navigating to the next node
in the Explorer.
- notifyNodeSelectedPreCallback(Explorer, int) - Method in interface nxopen.blockstyler.Explorer.NotifyNodeSelectedPreCallback
-
The NotifyNodeSelectedPre callback notifies a client before navigating to the next node
in the Explorer.
- notifyOnDelete() - Method in interface nxopen.preferences.SessionModeling
-
Returns the option " Notify on Delete " gives choice, whether the user wants a
notification message when a feature is being deleted will effect other features.
- NOTRIMPART - Static variable in class nxopen.tooling.EjectorPostProcessingBuilder.TrimPartName
-
No trim part
- NOTRIMPART - Static variable in class nxopen.tooling.TrimMoldComponentsBuilder.TrimPartName
-
No Trim Part
- notSaved - Variable in class nxopen.NXObject.AttributeInformation
-
The attribute is transient - it will not be saved on part save
- NOV - Static variable in class nxopen.DateItemBuilder.MonthOfYear
-
- NOW - Static variable in class nxopen.Update.Option
-
Perform an update immediately
- NOZZLE_AND_HOLDER - Static variable in class nxopen.cam.LaserProfileMove.CollisionChecks
-
Nozzle and Holder
- NOZZLE_ONLY - Static variable in class nxopen.cam.LaserProfileMove.CollisionChecks
-
Nozzle Only
- nPairs - Variable in class nxopen.uf.UFClear.Summary
-
- nParentMap - Variable in class nxopen.uf.UFModeling.ReplaceFeaturesData
-
- nParents - Variable in class nxopen.uf.UFSo.AskParentsData
-
- nParts - Variable in class nxopen.uf.UFPart.LoadStatus
-
- nParts - Variable in class nxopen.uf.UFWave.AskOutOfDatePartsData
-
- nPattern - Variable in class nxopen.uf.UFModlFeatures.AskCircularPatternFaceData
-
- npData - Variable in class nxopen.uf.UFGdt.TargetUdefArea
-
- nPiercedFaces - Variable in class nxopen.uf.UFModlFeatures.AskHollowData
-
- nPierceFaces - Variable in class nxopen.uf.UFModl.SolidPunchData
-
- nPipNodes - Variable in class nxopen.uf.UFSmd.AskChildPipNodesData
-
- nPoints - Variable in class nxopen.uf.UFEval.AskSplineControlPtsData
-
- nProdAssys - Variable in class nxopen.uf.UFUgmgr.AskProductAssembliesData
-
- nProfileCurves - Variable in class nxopen.uf.UFModl.AskSweepCurvesData
-
- NPS - Static variable in class nxopen.cam.DrillThreadMillToolBuilder.ToolFormTypeTypes
-
NPS
- NPS - Static variable in class nxopen.cam.fbm.ThreadFeatureGeometry.Form
-
Form: NPS
- NPS - Static variable in class nxopen.cam.HoleBossGeom.FormTypes
-
Form: NPS
- npsbranchvalues - Variable in class nxopen.routing.ReuseLibrary.SpecificationsGetBranchTableData
-
The NPS_BRANCH values.
- npsvalues - Variable in class nxopen.routing.ReuseLibrary.SpecificationsGetBranchTableData
-
The NPS Values.
- NPT - Static variable in class nxopen.cam.DrillThreadMillToolBuilder.ToolFormTypeTypes
-
NPT
- NPT - Static variable in class nxopen.cam.fbm.ThreadFeatureGeometry.Form
-
Form: NPT
- NPT - Static variable in class nxopen.cam.HoleBossGeom.FormTypes
-
Form: NPT
- NQC_DOUBLE_SUM - Static variable in class nxopen.cae.responsesimulation.CombinationEvaluationOptions.EvaluationMethod
-
- nr11 - Variable in class nxopen.uf.UFDrf.FrdimData
-
- nRefSets - Variable in class nxopen.uf.UFAssem.AskDefaultRefSetsData
-
- nRemovedFaces - Variable in class nxopen.uf.UFModl.SimplData
-
- nRemovedFaces - Variable in class nxopen.uf.UFModlFeatures.CreateSimplifyData
-
- nRetainedFaces - Variable in class nxopen.uf.UFModl.SimplData
-
- nRetainedFaces - Variable in class nxopen.uf.UFModlFeatures.CreateSimplifyData
-
- nRipedges - Variable in class nxopen.uf.UFModl.RipedgeData
-
- NRL - Static variable in class nxopen.cae.responsesimulation.CombinationEvaluationOptions.EvaluationMethod
-
- nrows - Variable in class nxopen.blockstyler.PropertyList.DoubleMatrixData
-
Number of Rows in the 2D matrix
- nrows - Variable in class nxopen.blockstyler.PropertyList.IntegerMatrixData
-
Number of Rows in the 2D matrix
- nrows - Variable in class nxopen.PropertyContainer.DoubleMatrixData
-
Number of Rows in the 2D matrix
- nrows - Variable in class nxopen.PropertyContainer.IntegerMatrixData
-
Number of Rows in the 2D matrix
- nRules - Variable in class nxopen.RuleManager.DebugInstance
-
number of rules
- nRuns - Variable in class nxopen.uf.UFRouteRun.AskRunsInPartData
-
- NS - Static variable in class nxopen.cam.DrillThreadMillToolBuilder.ToolFormTypeTypes
-
NS
- NS - Static variable in class nxopen.cam.fbm.ThreadFeatureGeometry.Form
-
Form: NS
- NS - Static variable in class nxopen.cam.HoleBossGeom.FormTypes
-
Form: NS
- nsection() - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
-
Returns the n section
License requirements: None.
- nSeedFaces - Variable in class nxopen.uf.UFWave.AskLinkRegionSourcesData
-
- NSIDED - Static variable in class nxopen.features.PatchOpeningsBuilder.Types
-
Patch with N-sided surface area method
- NSidedSurface - Interface in nxopen.features
-
Represents a nsided surface feature
To create or edit an instance of this class, use
NSidedSurfaceBuilder
Created in NX6.0.0
- NSidedSurfaceBuilder - Interface in nxopen.features
-
- NSidedSurfaceBuilder.CenterControlAxisType - Class in nxopen.features
-
the center control types
- NSidedSurfaceBuilder.CenterControlType - Class in nxopen.features
-
the center control type options
- NSidedSurfaceBuilder.FlowDirectionType - Class in nxopen.features
-
the flow direction options
- NSidedSurfaceBuilder.SurfaceType - Class in nxopen.features
-
the surface type options
- NSidedSurfaceBuilder.UVOrientationType - Class in nxopen.features
-
the UV orientation options
- NSMCUTOUT_TYPE_OPTS - Static variable in class nxopen.uf.UFModl.SmcutoutType
-
- nSoft - Variable in class nxopen.uf.UFClear.Summary
-
- NSTATE_OPTS - Static variable in class nxopen.uf.UFModl.State
-
- NSTYPE_OPTS - Static variable in class nxopen.uf.UFModl.SmslotType
-
- nTargetBodies - Variable in class nxopen.uf.UFAssem.AskBodiesOfAssemblyCutData
-
- nTargetObj - Variable in class nxopen.uf.UFModl.RefitFaceTargetData
-
- nToItems - Variable in class nxopen.uf.UFRouteRun.AskToItemsData
-
- nToolBodies - Variable in class nxopen.uf.UFAssem.AskBodiesOfAssemblyCutData
-
- nTopologies - Variable in class nxopen.uf.UFStd.ImportVrmlFileData
-
- ntotalresults - Variable in class nxopen.shapesearch.ShapeSearchBuilder.ExecuteSearchData
-
Search result total number
- nTouching - Variable in class nxopen.uf.UFClear.Summary
-
- NTYPE_OPTS - Static variable in class nxopen.uf.UFModl.SmholeType
-
- NULL - Static variable in class nxopen.annotations.LeaderAlignment
-
Should not be used
- NULL - Static variable in class nxopen.annotations.LeaderAttachment
-
Should not be used
- NULL - Static variable in class nxopen.annotations.LeaderSide
-
Should not be used
- NULL - Static variable in class nxopen.annotations.LeaderType
-
Should not be used
- NULL - Static variable in class nxopen.annotations.LeaderVerticalAttachment
-
Should not be used
- NULL - Static variable in class nxopen.AttributePropertiesBaseBuilder.DataTypeOptions
-
Null, the attribute will have no value
- NULL - Static variable in class nxopen.cam.InspectionAlignmentBuilder.RotateTablePcsUpdateOptions
-
No update of the PCS
- NULL - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.PromptVars
-
Specifies a NULL prompt
- NULL - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.QisvarTypes
-
Specifies a NULL QIS variable
- NULL - Static variable in class nxopen.NXObject.AttributeType
-
Null
- NULL - Static variable in class nxopen.routing.RoutePartDescriptor.SourceType
-
- NULL - Static variable in class nxopen.Tag
-
A unique tag value that does not identity any object
- NULL - Static variable in class nxopen.uf.UFKf.Type
-
- NULL - Static variable in class nxopen.visualreporting.Property.DatatypeOption
-
Null data type
- NULL - Static variable in class nxopen.weld.WeldAttribType
-
null
- NULL_ATTRIBUTE_TYPE - Static variable in class nxopen.uf.UFPd.AttributeType
-
- NULL_BUTTON - Static variable in class nxopen.menubar.MenuButton.Type
-
- NULL_GRID - Static variable in class nxopen.uf.UFDisp.GridContext
-
- NULL_TOPO - Static variable in class nxopen.uf.UFBrep.TopoType
-
- nullBandTolerance() - Method in interface nxopen.cam.ProbeToleranceParametersBuilder
-
Returns the null band tolerance
License requirements: None.
- NULLSIGN - Static variable in class nxopen.uf.UFModl.FeatureSigns
-
- NUM - Static variable in class nxopen.features.shipdesign.ManufacturingStockBuilder.ObjectType
-
Total Object Num
- num - Variable in class nxopen.uf.UFDrf.AskDimensionsOfSetData
-
- num - Variable in class nxopen.uf.UFModl.StringList
-
- num - Variable in class nxopen.uf.UFPlist.AskTagsData
-
- NUM - Static variable in class nxopen.Validation.InputType
-
Last item define the number of the input source, not used as a type.
- NUM - Static variable in class nxopen.weld.WeldAdvisorCustomerDefault
-
number of types
- NUM_ATTRIBUTE_TYPES - Static variable in class nxopen.uf.UFPd.AttributeType
-
- NUM_BEAM_FALL_OFF - Static variable in class nxopen.uf.UFView.LightBeamFallOff
-
- NUM_CHECKS - Static variable in class nxopen.features.shipdesign.ExamineSteelFeatureBuilderCheck
-
Number of check
- NUM_CHECKS - Static variable in class nxopen.geometricanalysis.ExamineGeometry.Check
-
Number of Checks
- NUM_DETAIL - Static variable in class nxopen.uf.UFView.LightDetail
-
- NUM_EDGE - Static variable in class nxopen.uf.UFView.LightEdge
-
- NUM_FALL_OFF - Static variable in class nxopen.uf.UFView.LightFallOff
-
- NUM_INT_LEADER_PTS - Static variable in class nxopen.uf.UFConstants
-
- NUM_INT_PARMS - Static variable in class nxopen.uf.UFConstants
-
- NUM_INTENSITY_FACTOR - Static variable in class nxopen.uf.UFView.LightIntensityFactor
-
- NUM_LIGHT_TYPES - Static variable in class nxopen.uf.UFView.LightType
-
- NUM_NODE_TYPE - Static variable in class nxopen.uf.UFSmd.PipTypeEnumE
-
- NUM_POINTS - Static variable in class nxopen.weld.WeldPointSpacingMethod
-
Place multiple spot welds based on number of points
- NUM_REAL_PARMS - Static variable in class nxopen.uf.UFConstants
-
- NUM_SIZES - Static variable in class nxopen.display.TransientText.TextSize
-
- NUM_SIZES - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.TextSize
-
- NUM_TREE_MODES - Static variable in class nxopen.uf.UFUiOnt.TreeMode
-
- numAdditionalCurves - Variable in class nxopen.uf.UFSmd.AskFpAddCurvesData
-
- numAllInterf - Variable in class nxopen.assemblies.ClearanceSet.Summary
-
The total number of interferences.
- numAlloc - Variable in class nxopen.uf.UFRoute.TagList
-
- numAllowableGeometry - Variable in class nxopen.uf.UFPd.AskDefinitionAllowableGeometryData
-
- numAnchors - Variable in class nxopen.uf.UFRoute.AskStockDataAnchorsData
-
- numAnnotations - Variable in class nxopen.uf.UFGdt.AskTagsData
-
- numAppendedTextTags - Variable in class nxopen.uf.UFGdt.AnnotationTags
-
- numAppViews - Variable in class nxopen.uf.UFRoute.LoadAppViewListData
-
- numArcs - Variable in class nxopen.uf.UFDrf.AskIdSymbolGeometryData
-
- numArcs - Variable in class nxopen.uf.UFDrf.AssortpartArc
-
- numArcs - Variable in class nxopen.uf.UFDrf.CenterlineInfo
-
- numArcs - Variable in class nxopen.uf.UFDrf.DimInfo
-
- numArcSegments - Variable in class nxopen.uf.UFDrf.AssortpartArc
-
- numArguments - Variable in class nxopen.RuleManager.FunctionInformation
-
Number of arguments
- numArrays - Variable in class nxopen.uf.UFAssem.AskArraysInPartData
-
- numArrays - Variable in class nxopen.uf.UFAssem.AskArraysOfInstData
-
- numArrows - Variable in class nxopen.uf.UFDrf.AssortpartArrow
-
- numArrows - Variable in class nxopen.uf.UFDrf.DimInfo
-
- numArrows - Variable in class nxopen.uf.UFDrf.GdtSymbolInfo
-
- numArrows - Variable in class nxopen.uf.UFDrf.IdSymbolInfo
-
- numArrows - Variable in class nxopen.uf.UFDrf.LabelInfo
-
- numAssemblyMeshes - Variable in class nxopen.uf.UFSf.AutoCreateMeshMatingConditionData
-
- numAssoc - Variable in class nxopen.uf.UFDrf.AskOrdoriginInfoData
-
- numAssociatedDatums - Variable in class nxopen.uf.UFGdt.AskAssociatedDatumsData
-
- numAssociativities - Variable in class nxopen.uf.UFDrf.AskAssociativityData
-
- numAssocObjs - Variable in class nxopen.uf.UFDrf.ArcInfo
-
- numAssocObjs - Variable in class nxopen.uf.UFDrf.CenterlineInfo
-
- numAssocObjs - Variable in class nxopen.uf.UFDrf.DimLineInfo
-
- numAssocObjs - Variable in class nxopen.uf.UFDrf.LeaderInfo
-
- numAttachments - Variable in class nxopen.uf.UFMotion.AskAttachmentsOfTypeData
-
- numAttributes - Variable in class nxopen.uf.UFGdt.ProductAttribute
-
- numAttributeValueDats - Variable in class nxopen.uf.UFPd.ProductAttribute
-
- numAttributeValueDats - Variable in class nxopen.uf.UFPd.ProductAttribute2
-
- numAttributeValues - Variable in class nxopen.uf.UFPd.ProductAttribute
-
- numAttributeValues - Variable in class nxopen.uf.UFPd.ProductAttribute2
-
- numBaseFaces - Variable in class nxopen.uf.UFModl.StycornerData
-
- numBendLines - Variable in class nxopen.uf.UFSmd.AskBendLinesData
-
- numBends() - Method in interface nxopen.tooling.DirectUnfoldBuilder
-
Returns the number of bends.
- numBendTanLines - Variable in class nxopen.uf.UFSmd.AskBendTanLinesData
-
- NUMBER - Static variable in class nxopen.annotations.HoleTableSettingsLabelBuilder.IndexType
-
Number
- NUMBER - Static variable in class nxopen.assemblies.AssembliesGeneralPropertiesBuilder.QuantityOptions
-
Use either the integer or real value to set the quantity
- NUMBER - Static variable in class nxopen.AttributePropertiesBaseBuilder.DataTypeOptions
-
Number, the value is a floating point number and may contain units
- NUMBER - Static variable in class nxopen.cae.MeshControlBuilder.CylinderAxialElementSizeType
-
- NUMBER - Static variable in class nxopen.cae.MeshControlBuilder.CylinderCircularSizeType
-
- NUMBER - Static variable in class nxopen.cae.XyFunctionMeasure
-
Measure number
- NUMBER - Static variable in class nxopen.cae.XyFunctionUnit
-
Unit number
- NUMBER - Static variable in class nxopen.cam.DmCurveBuilder.DpmcvStepTypes
-
Number
- NUMBER - Static variable in class nxopen.cam.DPMItpBuilder.StepoverTypeOption
-
stepover number
- NUMBER - Static variable in class nxopen.cam.ReliefCut.Modes
-
Number
- number() - Method in interface nxopen.cam.ReliefCut
-
Returns the relief cut number
License requirements: None.
- number() - Method in interface nxopen.cam.SpringPasses
-
Returns the number of spring passes
License requirements: None.
- NUMBER - Static variable in class nxopen.cam.StepoverBuilder.StepoverTypes
-
Number of stepovers
- number() - Method in interface nxopen.cam.ToolChangeCiBuilder
-
Returns the Tool number builder
License requirements: None.
- number() - Method in interface nxopen.drafting.DrawingCreationWizardBuilder
-
Returns the number.
- number() - Method in interface nxopen.features.IFormBuilder
-
Returns the number of iso-parameter curves to be inserted
License requirements: None.
- number() - Method in interface nxopen.features.IsoparametricCurvesBuilder
-
Returns the number of curves
License requirements: None.
- number() - Method in interface nxopen.features.subdivision.SubdivisionSplitFaceBuilder
-
Returns the desired split number in one face.
- number() - Method in interface nxopen.geometricanalysis.sectionanalysis.CurveAlignedBuilder
-
Returns a value indicating how many sections should be created
License requirements: None.
- number() - Method in interface nxopen.geometricanalysis.sectionanalysis.IsoparametricBuilder
-
Returns a value indicating how many sections should be created
License requirements: None.
- number() - Method in interface nxopen.geometricanalysis.sectionanalysis.ParallelPlanesExBuilder
-
Returns a value indicating how many sections should be created
License requirements: None.
- number() - Method in interface nxopen.geometricanalysis.sectionanalysis.RadialBuilder
-
Returns a value indicating how many sections should created
License requirements: None.
- number() - Method in interface nxopen.geometricanalysis.sectionanalysis.XYZPlaneBuilder
-
Returns a value indicating how many sections should be created
License requirements: None.
- number() - Method in interface nxopen.geometricutilities.CurveShapingBuilder
-
Returns the number of points to be inserted
License requirements: None.
- NUMBER - Static variable in class nxopen.issue.IssueProperty.Type
-
Number type
- NUMBER - Static variable in class nxopen.RuleManager.RuleType
-
- NUMBER - Static variable in class nxopen.uf.UFKf.Type
-
- number - Variable in class nxopen.uf.UFModlGeneral.AskCircularIsetParmsData
-
- number - Variable in class nxopen.uf.UFSf.EdgeDensityData
-
- NUMBER - Static variable in class nxopen.validate.RequirementBuilder.DataTypeOptions
-
- number - Variable in class nxopen.Validation.LookupIntegerData
-
Integer associate with the key
- number - Variable in class nxopen.Validation.LookupNumberData
-
Number associate with the key
- NUMBER - Static variable in class nxopen.visualreporting.Classifier.RangeMethodOption
-
A numeric range will be used
- NUMBER - Static variable in class nxopen.weld.JointmarkGuideBuilder.SpaceOption
-
Number
- NUMBER - Static variable in class nxopen.weld.WeldAdvisorCheckerType
-
number of checkers
- NUMBER128 - Static variable in class nxopen.features.MeshTransformerBuilder.StepCountValue
-
Step count 128
- NUMBER16 - Static variable in class nxopen.features.MeshTransformerBuilder.StepCountValue
-
Step count 16
- NUMBER256 - Static variable in class nxopen.features.MeshTransformerBuilder.StepCountValue
-
Step count 256
- NUMBER32 - Static variable in class nxopen.features.MeshTransformerBuilder.StepCountValue
-
Step count 32
- NUMBER512 - Static variable in class nxopen.features.MeshTransformerBuilder.StepCountValue
-
Step count 512
- NUMBER64 - Static variable in class nxopen.features.MeshTransformerBuilder.StepCountValue
-
Step count 64
- NUMBER8 - Static variable in class nxopen.features.MeshTransformerBuilder.StepCountValue
-
Step count 8
- NUMBER_AND_DEPTH - Static variable in class nxopen.cam.ReliefCut.Modes
-
Number and Depth
- NUMBER_ELEMENT - Static variable in class nxopen.cae.OneDimensionalElementSplitBuilder.SplitMethodType
-
by number of elements
- NUMBER_LENGTH - Static variable in class nxopen.weld.FilletBuilder.EnumSkipWeldMethod
-
- NUMBER_LENGTH - Static variable in class nxopen.weld.WeldGrooveBuilder.SkipWeldMethod
-
Number and Length
- NUMBER_OF_CURVES - Static variable in class nxopen.features.shipdesign.InverseBendingLinesBuilder.MethodType
-
Number of curves.
- NUMBER_OF_CUTS - Static variable in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.ModeTypes
-
Local Return: Number of Cuts
- NUMBER_OF_LEVELS - Static variable in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.ModeTypes
-
Local Return: Number of Levels
- NUMBER_OF_OPTIONS - Static variable in class nxopen.routing.SegmentManager.SubdivideSpacing
-
Number of Options
- NUMBER_OF_PASSES - Static variable in class nxopen.cam.NcmTurnThreadBuilder.LocalReturnModes
-
Number of Passes
- NUMBER_OF_PASSES - Static variable in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.ModeTypes
-
Local Return: Number of Passes
- NUMBER_OF_STANDARD_DEVIATIONS - Static variable in class nxopen.cae.DurabilityDamageEvaluationBuilder.ProbabilityOptionEnum
-
Number of Std.
- NUMBER_OF_STANDARD_DEVIATIONS - Static variable in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.ProbabilityOptionEnum
-
Number Of Standard Deviations
- NUMBER_OF_STARTS - Static variable in class nxopen.cam.NcmTurnThreadBuilder.LocalReturnModes
-
Number of Starts
- NUMBER_OF_TURNS - Static variable in class nxopen.geometricutilities.SpiralPattern.SpiralDefineSize
-
using number of turns to define size of spiral
- NUMBER_OFFSET - Static variable in class nxopen.SketchPattern.InstanceControl
-
The pattern instance control type is number + offset
- NUMBER_REFERENCES - Static variable in class nxopen.HumanData.ReferencePointType
-
Indicate the number of reference point types
- NUMBER_SPACING - Static variable in class nxopen.weld.FilletBuilder.EnumSkipWeldMethod
-
- NUMBER_SPACING - Static variable in class nxopen.weld.WeldGrooveBuilder.SkipWeldMethod
-
Number and Spacing
- NUMBER_TYPE - Static variable in class nxopen.uf.UFPd.AttributeType
-
- NUMBER_VALUE - Static variable in class nxopen.uf.UFPd.AttributeValueType
-
- numberAtFirstDirection() - Method in interface nxopen.cam.StepoverBuilder
-
Returns the number of stepovers at first direction
License requirements: None.
- numberAtSecondDirection() - Method in interface nxopen.cam.StepoverBuilder
-
Returns the number of stepovers at second direction
License requirements: None.
- numberBends() - Method in interface nxopen.tooling.PrebendBuilder
-
Returns the number of prebends divide into
License requirements: None.
- numberBodiesRendered - Variable in class nxopen.ModelingViewHighQualityImage.ImageCountsData
-
How many bodies were rendered for the image
- numberBusmods - Variable in class nxopen.uf.UFPd.ProductAttribute
-
- numberBusmods - Variable in class nxopen.uf.UFPd.ProductAttribute2
-
- numberCheckPoints() - Method in interface nxopen.geometricanalysis.DeviationChecking
-
- numberColumnString() - Method in interface nxopen.blockstyler.SetList
-
Returns the NumberColumnString as string
License requirements: None.
- numberConnectedPanels() - Method in interface nxopen.weld.WeldPointBuilder
-
Returns the num connected panels.
- numberDelayedParts() - Method in interface nxopen.PartDelayedUpdateStatus
-
Returns the number of parts that could not be updated.
- numberEdges - Variable in class nxopen.uf.UFModl.EdgeBlendData
-
- numberEdits - Variable in class nxopen.uf.UFView.AskVdeData
-
- numberEdits - Variable in class nxopen.uf.UFView.AskVdeDataWithTypeData
-
- numberFacesRendered - Variable in class nxopen.ModelingViewHighQualityImage.ImageCountsData
-
How many faces were rendered for the image
- numberGapPoints - Variable in class nxopen.uf.UFModeling.TrimSheetData
-
- numberInSeries() - Method in interface nxopen.display.DynamicSectionBuilder
-
Returns the number of requested section planes in the current section series.
- numberIntermediate() - Method in interface nxopen.tooling.IntermediateStageBuilder
-
Returns the number of intermediate stages.
- numberIntervals() - Method in interface nxopen.tooling.FlowDisplayBuilder
-
Returns the interval number of the whole filling time.
- numberInX - Variable in class nxopen.uf.UFModlGeneral.AskLinearIsetParmsData
-
- numberInY - Variable in class nxopen.uf.UFModlGeneral.AskLinearIsetParmsData
-
- numberLines() - Method in interface nxopen.annotations.TextComponent
-
Returns the number of lines of text.
- numberObjects - Variable in class nxopen.uf.UFDraw.AskRenderSetObjectsData
-
- numberOfBars - Variable in class nxopen.uf.UFDrf.GetTextBarsData
-
- numberOfBendSegments() - Method in interface nxopen.features.sheetmetal.LoftedFlangeBuilder
-
Returns the number of bend segments
Get and set the number of bend segments
If use segmented bends is set to true then only the number of bend segments value is used for dividing the bend even though a value is set
License requirements: None.
- numberOfBlades() - Method in interface nxopen.cam.MultiBladeGeomBuilder
-
Returns the number of blades
License requirements: None.
- numberOfBlades() - Method in interface nxopen.cam.SurfaceContourBuilder
-
Returns the number of blades
License requirements: None.
- numberOfBundles - Variable in class nxopen.uf.UF.SystemInfo
-
- numberOfChars - Variable in class nxopen.uf.UFUgfont.FontHeader
-
- numberOfColumns() - Method in interface nxopen.annotations.TableSectionBuilder
-
Returns the number of columns, input for tabulr note column numbers
License requirements: None.
- numberOfColumns() - Method in interface nxopen.blockstyler.Enumeration
-
Returns the NumberOfColumns
License requirements: None.
- numberOfColumns() - Method in interface nxopen.blockstyler.SetList
-
Returns the NumberOfColumns
License requirements: None.
- numberOfColumns() - Method in interface nxopen.blockstyler.Tree
-
Returns the number of column inserted in the tree.
- numberOfContours() - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder
-
Returns the number of contour lines to compute and display.
- numberOfConvertedParts() - Method in interface nxopen.positioning.MatingConverter
-
Returns
the number of parts parts converted by this conversion operation.
- numberOfCopies() - Method in interface nxopen.features.GeomcopyBuilder
-
Returns the number of copies to make for the geometry to instance.
- numberOfCopies() - Method in interface nxopen.features.MoveObjectBuilder
-
Returns the number of copies
License requirements: None.
- numberOfCopies() - Method in interface nxopen.features.OffsetCurveBuilder
-
Returns the number of copies
License requirements: None.
- numberOfCopies() - Method in interface nxopen.features.SectionCurveBuilder
-
Returns the number of copies
License requirements: None.
- numberOfCopies() - Method in interface nxopen.features.subdivision.CopyCageBuilder
-
Returns the number of copies
License requirements: None.
- numberOfCopies() - Method in interface nxopen.routing.TransformPathBuilder
-
Returns the number of copies to create in the commit method for the option
Routing.TransformPathBuilder.TransformOption#COPY_ORIGINAL
.
- numberOfCopies() - Method in interface nxopen.SketchOffsetBuilder
-
Returns the number of offset copies
License requirements: None.
- numberOfCopy() - Method in interface nxopen.cae.ElementExtrudeBuilder
-
Returns the number of copy
License requirements: None.
- numberOfCopy() - Method in interface nxopen.cae.ElementRevolveBuilder
-
Returns the number of copies
License requirements: None.
- numberOfCopy() - Method in interface nxopen.tooling.ReliefDesignBuilder
-
Returns the number of relief to be copied.
- numberOfCornerNodes() - Method in interface nxopen.cae.FEElement
-
Returns the number of corner nodes
License requirements: None.
- numberOfCurves() - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder
-
Returns the number of curves to generate on the profile.
- numberOfCutRegionsFound - Variable in class nxopen.uf.UFTurn.AskCutRegionsExistData
-
- numberOfCuts() - Method in interface nxopen.cam.BladeCutLevels
-
Returns the number of cuts
License requirements: None.
- numberofcuts - Variable in class nxopen.cam.CenterlineDrillVariableIncrementBuilder.VariableIncrementListData
-
the number of cuts
- numberOfCuts() - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder
-
Returns the local number of cuts
License requirements: None.
- numberOfDepthPasses() - Method in interface nxopen.cam.MultiplePassesBuilder
-
Returns the Number of Depth Passes
License requirements: None.
- numberOfDivideEvents() - Method in interface nxopen.cam.ToolPathDivideBuilder
-
Returns the number of defined divide event indices
License requirements: None.
- numberOfElementsInHysterisisLoop() - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
Returns the number of elements in hysterisis loop.
- numberOfElms - Variable in class nxopen.uf.UFSf.ContactMeshData
-
- numberOfEntries() - Method in interface nxopen.menubar.ContextMenu
-
Returns the number of MenuBar.ContextMenuEntry
objects in this menu.
- numberOfExps - Variable in class nxopen.uf.UFModlGeneral.AskExpDescOfFeatData
-
- numberOfExps - Variable in class nxopen.uf.UFModlGeneral.AskExpDescOfFrecData
-
- numberOfExps - Variable in class nxopen.uf.UFModlGeneral.AskExpsOfFeatureData
-
- numberOfExps - Variable in class nxopen.uf.UFModlGeneral.AskExpsOfPartData
-
- numberOfExps - Variable in class nxopen.uf.UFModlGeneral.AskRpoDescOfFeatData
-
- numberOfExps - Variable in class nxopen.uf.UFModlGeneral.AskRpoDescOfFrecData
-
- numberOfFacePairs() - Method in interface nxopen.features.sheetmetal.ThreeBendCornerBuilder
-
Returns the number of face pairs already identified for the three bend corner feature.
- numberOfFaces() - Method in interface nxopen.facet.FacetedBody
-
Returns
the number of faces in this faceted body in the highest level of detail.
- numberOfFaces - Variable in class nxopen.uf.UFModl.Faces
-
- numberOfFeatures - Variable in class nxopen.uf.UFModeling.AskAllMembersOfSetData
-
- numberOfFeatures - Variable in class nxopen.uf.UFModeling.AskFeaturesOfMirrorSetData
-
- numberOfFeatures - Variable in class nxopen.uf.UFModl.CreateExtrusion1Data
-
- numberOfFeatures - Variable in class nxopen.uf.UFModl.CreateExtrusion2Data
-
- numberOfFeatures - Variable in class nxopen.uf.UFModl.CreateExtrusionData
-
- numberOfFeatures - Variable in class nxopen.uf.UFModl.CreateExtrusionPath1Data
-
- numberOfFeatures - Variable in class nxopen.uf.UFModl.CreateExtrusionPathData
-
- numberOfFeatures - Variable in class nxopen.uf.UFModl.CreateRevolution1Data
-
- numberOfFeatures - Variable in class nxopen.uf.UFModl.CreateRevolutionData
-
- numberOfFeatures - Variable in class nxopen.uf.UFModl.CreateRevolutionDirData
-
- numberOfFeatures - Variable in class nxopen.uf.UFModl.CreateTrimmedTube1Data
-
- numberOfFeatures - Variable in class nxopen.uf.UFModl.CreateTrimmedTubeData
-
- numberOfFeatures - Variable in class nxopen.uf.UFModlGeneral.AskFeaturesOfExpData
-
- numberOfFinishPasses() - Method in interface nxopen.cam.FinishPassesBuilder
-
Returns the parameter to define number of finish passes
License requirements: cam_base ("CAM BASE")
.
- numberOfFormEdges() - Method in interface nxopen.cam.FormEdgesBuilder
-
Returns the number of form edges item
License requirements: cam_base ("CAM BASE")
.
- numberOfFrames - Variable in class nxopen.cae.Post.Animation
-
- numberOfFrames() - Method in interface nxopen.features.shipdesign.ItFrameListItemBuilder
-
Returns the number of inter transverse frames.
- numberOfIncrements() - Method in interface nxopen.cae.optimization.TBSTestFunction
-
Returns the number of increments
License requirements: None.
- numberOfIncrements - Variable in class nxopen.cae.Post.AnimationStreamline
-
- numberOfIntermediateCuts() - Method in interface nxopen.cam.BladeCutLevels
-
Returns the Number of Intermediate Cuts
License requirements: None.
- numberOfLayers() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the number of layers
License requirements: nx_masterfem ("Finite Element Modeling")
.
- numberOfLeaders() - Method in interface nxopen.annotations.LeaderBundle
-
Returns the number of leaders.
- numberOfLevels() - Method in interface nxopen.assemblies.UpdateStructureBuilder
-
Returns the particular selected level for updating the structure.
- numberOfLevels - Variable in class nxopen.cae.Post.Colorbar
-
- numberOfLevels() - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder
-
Returns the local number of levels
License requirements: None.
- numberOfLevelsOfDetail() - Method in interface nxopen.facet.FacetedBody
-
Returns
the number of levels of detail in this faceted body.
- numberOfMargins() - Method in interface nxopen.annotations.OrdinateDimensionPreferences
-
Returns the number of margins
License requirements: None.
- numberOfMargins() - Method in interface nxopen.annotations.OrdinateStyleBuilder
-
Returns the number of margins to create.
- numberOfMaxBins() - Method in interface nxopen.cae.DurabilityDamageEvaluationBuilder
-
Returns the number of max bins
License requirements: None.
- numberOfMeanBins() - Method in interface nxopen.cae.DurabilityDamageEvaluationBuilder
-
Returns the number of mean bins
License requirements: None.
- numberOfMiters() - Method in interface nxopen.routing.MiteredBendCorner
-
Returns the number of miters in the corner.
- numberOfOccurrences() - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
Returns the number of occurrences.
- numberOfPairs() - Method in interface nxopen.routing.DuctReinforcementBuilder
-
Returns the number of pairs of outside reinforcements going parallel to axis of the duct
License requirements: routing_hvac ("Routing HVAC")
.
- numberOfParameters() - Method in interface nxopen.cam.Ude
-
Returns the number of parameters
License requirements: None.
- numberOfParams - Variable in class nxopen.uf.UFUde.AskParamsData
-
- numberOfPasses() - Method in interface nxopen.cam.MultiDepthCut
-
Returns the Number of Passes builder (inheritable int), Multi-Depth Cut
License requirements: None.
- numberOfPasses() - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder
-
Returns the local number of passes value
License requirements: None.
- numberOfPasses() - Method in interface nxopen.cam.TurnRoughFinishTestCut
-
Returns the test cut number of passes
License requirements: None.
- numberOfPaths - Variable in class nxopen.uf.UFRoute.AskSegmentPathsData
-
- numberOfPieces() - Method in interface nxopen.routing.OverstockBuilder
-
- numberOfPiecesLock() - Method in interface nxopen.routing.OverstockBuilder
-
Returns the number of pieces lock state.
- numberofplanes - Variable in class nxopen.cam.SpunOutlineGeom.PlanesAtAnglesData
-
array of plane numbers for each set
- numberofplanes - Variable in class nxopen.cam.SpunOutlineGeom.PlanesThroughPointsData
-
array of plane numbers for each set
- numberOfPoints - Variable in class nxopen.cae.AfuData.EvenData
-
Number of abscissa elements
- numberOfPoints() - Method in interface nxopen.weld.JointmarkGuideBuilder
-
Returns the number to determine the points along the guide curve.
- numberOfPointsExpression() - Method in interface nxopen.features.PointSetBuilder
-
Returns the number of points that will be created along curve.
- numberOfPointsInUDirectionExpression() - Method in interface nxopen.features.PointSetBuilder
-
Returns the number of points to be created in the u direction.
- numberOfPointsInVDirectionExpression() - Method in interface nxopen.features.PointSetBuilder
-
Returns the number of points to be created in the v direction.
- numberOfPointsOnEdge() - Method in interface nxopen.cae.WeldBuilder
-
Returns the number of points on the edge(s) used to specify the location of the weld
License requirements: None.
- numberOfPointsOption() - Method in interface nxopen.cae.WeldBuilder
-
Returns the option to specify the maximum number of points on the edge(s) used to specify the location of the weld
License requirements: None.
- numberOfPointsPerSection() - Method in interface nxopen.geometricutilities.AlignmentMethodBuilder
-
Returns the number of alignment points in each section.
- numberOfResults - Variable in class nxopen.uf.UFMotion.AskAccelerationResultsData
-
- numberOfResults - Variable in class nxopen.uf.UFMotion.AskForceResultsData
-
- numberOfResults - Variable in class nxopen.uf.UFMotion.AskRotDisplacementResultsData
-
- numberOfResults - Variable in class nxopen.uf.UFMotion.AskTorqueResultsData
-
- numberOfResults - Variable in class nxopen.uf.UFMotion.AskTransDisplacementResultsData
-
- numberOfResults - Variable in class nxopen.uf.UFMotion.AskVelocityResultsData
-
- numberOfRows() - Method in interface nxopen.annotations.TableSectionBuilder
-
Returns the number of rows
License requirements: None.
- numberOfRows() - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder
-
Returns the number of rows in the table.
- numberOfRows() - Method in interface nxopen.features.TabNoteCfgBuilder
-
Returns the number of rows
License requirements: None.
- numberOfScenarios - Variable in class nxopen.uf.UFSf.LocateScenariosData
-
- numberOfSection - Variable in class nxopen.cae.Post.Axisymmetric
-
- numberOfSections() - Method in interface nxopen.cam.HolderSectionBuilder
-
Returns the number of holder sections
License requirements: cam_base ("CAM BASE")
.
- numberOfSections() - Method in interface nxopen.cam.UdtSectionBuilder
-
Returns the number of udt section
License requirements: cam_base ("CAM BASE")
.
- numberOfSections() - Method in interface nxopen.geometricutilities.AlignmentMethodBuilder
-
Returns the number of section in the alignment point block
License requirements: None.
- numberOfSegments() - Method in interface nxopen.features.subdivision.ExtractCagePolylineBuilder
-
Returns the number of segments
License requirements: None.
- numberOfSegments() - Method in interface nxopen.features.subdivision.SubdivisionExtrudeCageBuilder
-
Returns the number of segments.
- numberOfSegments() - Method in interface nxopen.features.subdivision.SubdivisionLoftBuilder
-
Returns the number of segments
License requirements: None.
- numberOfSegments() - Method in interface nxopen.features.subdivision.SubdivisionTubeBuilder
-
Returns the number of segments.
- numberOfSegments - Variable in class nxopen.routing.SegmentManager.SubdivideOption
-
Number of Segments
- numberOfSegments() - Method in interface nxopen.weld.GrooveBuilder
-
- numberOfSets - Variable in class nxopen.uf.UFModeling.AskSetsOfMemberData
-
- numberOfSidePasses() - Method in interface nxopen.cam.MultiplePassesBuilder
-
Returns the Number of Side Passes
License requirements: None.
- numberOfSides() - Method in interface nxopen.geometricutilities.PolygonPattern
-
Returns the number of sides for the polygon type pattern will generated in this direction
License requirements: None.
- numberOfSides() - Method in interface nxopen.SketchPolygonBuilder
-
Returns the number of sides
License requirements: None.
- numberOfSides - Variable in class nxopen.uf.UFModlGeneral.AskPrismParmsData
-
- numberOfStandardDeviations() - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
Returns the number of standard deviations.
- numberOfStarts() - Method in interface nxopen.cam.ThreadCutParameters
-
Returns the number of starts
License requirements: None.
- numberOfStepovers() - Method in interface nxopen.cam.StepoverBuilder
-
Returns the number of stepovers
License requirements: None.
- numberOfStepoversPerSide() - Method in interface nxopen.cam.AreaMillingNonSteepContainment
-
Returns the number of stepovers per side builder (inheritable int)
License requirements: None.
- numberOfStepoversPerSide() - Method in interface nxopen.cam.FlowCutSteepContainment
-
Returns the number of stepovers per side builder (inheritable int)
License requirements: None.
- numberOfSteps() - Method in interface nxopen.cam.CornerControlBuilder
-
Returns the slowdown number of steps.
- numberOfSteps() - Method in interface nxopen.cam.StepParamsBuilder
-
Returns the number of step params
License requirements: cam_base ("CAM BASE")
.
- numberOfSubElements() - Method in interface nxopen.cae.OneDimensionalElementSplitBuilder
-
Returns the number of sub elements
License requirements: None.
- numberOfSubstring - Variable in class nxopen.uf.UFDrf.GetTextSubstringData
-
- numberOfThreads() - Method in interface nxopen.cam.NcmHoleMachining
-
Returns the number of threads
License requirements: None.
- numberOfTimePeriods - Variable in class nxopen.cae.Post.AnimationStreamline
-
- numberOfTools() - Method in interface nxopen.sim.KinematicComponentBuilder
-
Returns the number of tools
License requirements: None.
- numberOfTrackPoints() - Method in interface nxopen.cam.MillingTrackpointBuilder
-
Returns the number of trackpoints
License requirements: cam_base ("CAM BASE")
.
- numberOfTrackPoints() - Method in interface nxopen.cam.TrackingBuilder
-
Returns the number of trackpoints
License requirements: cam_base ("CAM BASE")
.
- numberOfTurns() - Method in interface nxopen.features.HelixBuilder
-
Returns the number of turns
License requirements: None.
- numberOfTurns() - Method in interface nxopen.geometricutilities.HelixPattern
-
Returns the number of turns for the Helix type pattern
License requirements: None.
- numberOfTurns() - Method in interface nxopen.geometricutilities.SpiralPattern
-
Returns the number of turns of spiral
License requirements: None.
- numberofunloadedfacetedbodies - Variable in class nxopen.facet.FacetedBodyCollection.AssociatedFacetedBodiesData
-
The number of unloaded associated faceted bodies for this solids body
- numberOfUPoints() - Method in interface nxopen.cam.InspectionUVGridBuilder
-
Returns the number of points in U
License requirements: None.
- numberOfUserParameters() - Method in interface nxopen.cam.MoveBuilder
-
Returns the number of user parameters
License requirements: None.
- numberOfValidPoints() - Method in interface nxopen.cam.InspectionUVGridBuilder
-
Returns the number of valid points created for the UV Grid
License requirements: None.
- numberOfVPoints() - Method in interface nxopen.cam.InspectionUVGridBuilder
-
Returns the number of points in V
License requirements: None.
- numberOfWelds() - Method in interface nxopen.weld.FilletBuilder
-
Returns the expression number indicates number of welds in skip welds.
- numberOfWelds() - Method in interface nxopen.weld.WeldGrooveBuilder
-
Returns the number of welds
License requirements: ugweld ("UG WELD")
.
- numberOfWraps() - Method in interface nxopen.routing.OverstockBuilder
-
Returns the number of wraps if the
OverstockBuilder.WrapType
is
OverstockBuilder.WrapType.SPOT
License requirements: routing_advanced ("Routing Advanced") OR routing_harness ("Routing Harness") OR routing_cabling ("Routing Cabling") OR routing_pipetube ("Routing Piping and Tubing") OR routing_hvac ("Routing HVAC") OR routing_platform ("Routing Platform") OR routing_pid ("Routing PID")
Created in NX6.0.0
- numberPoints - Variable in class nxopen.uf.UFModl.BlendEdge
-
- numberPolesSelected() - Method in interface nxopen.features.PoleSmoothingBuilder
-
Returns the number of poles selected
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- numberPolygonsGenerated - Variable in class nxopen.ModelingViewHighQualityImage.ImageCountsData
-
How many polygons were created from the faces for the image
- numberRenderSets - Variable in class nxopen.uf.UFDraw.AskRenderSetsData
-
- numberRenderSets - Variable in class nxopen.uf.UFDraw.AskRenderSetsOfViewData
-
- numberRequiredFaceSets() - Method in interface nxopen.weld.GrooveBuilder
-
- numberRootDepth() - Method in interface nxopen.annotations.LineWeldDataBuilder
-
Returns the number of welds or root opening or depth of weld
License requirements: None.
- NUMBERS - Static variable in class nxopen.routing.BranchPathNumberingBuilder.Sequence
-
1, 2, 3,.....
- numberSegments() - Method in interface nxopen.weld.WeldJointBuilder
-
- numberSelectable() - Method in interface nxopen.blockstyler.ObjectColorPicker
-
Returns the NumberSelectable.
- numberSteps() - Method in interface nxopen.motion.AnimationControl
-
Returns the number of animation steps
License requirements: mechanisms ("MECHANISMS")
.
- numberStorageType - Variable in class nxopen.facet.FacetingParameters
-
This indicates whether the real
numbers for facet vertices and facet
normals should be stored as floats
(UF_FACET_TYPE_FLOAT) or as doubles
(UF_FACET_TYPE_DOUBLE).
- numberStorageType - Variable in class nxopen.uf.UFFacet.Parameters
-
- numberSubMeshes() - Method in interface nxopen.tooling.FlowDisplayBuilder
-
Returns the number of sub-meshes to display
License requirements: None.
- numberSurfaceVectors() - Method in interface nxopen.weld.EasyPatternBuilder
-
Returns the number surface vectors to create for each pattern.
- numberToggle() - Method in interface nxopen.cam.ToolChangeCiBuilder
-
Returns the Tool number toggle
License requirements: None.
- numberUcheckPoints() - Method in interface nxopen.geometricanalysis.DeviationChecking
-
- numberUnclosedParts() - Method in interface nxopen.PartCloseStatus
-
Returns the number of parts that could not be closed
License requirements: None.
- numberUnloadedParts() - Method in interface nxopen.PartLoadStatus
-
Returns the number of parts that could not be loaded.
- numberUnsavedObjects() - Method in interface nxopen.PartSaveStatus
-
Returns the number of objects that could not be saved
License requirements: None.
- numberUnsavedParts() - Method in interface nxopen.PartSaveStatus
-
Returns the number of parts that could not be saved
License requirements: None.
- numberValue() - Method in interface nxopen.annotations.PmiAttributeValueNumberBuilder
-
Returns the number_value
License requirements: None.
- numberValue() - Method in interface nxopen.annotations.PmiNumberBuilder
-
Returns the num value
License requirements: None.
- numberValue() - Method in interface nxopen.AttributePropertiesBaseBuilder
-
Returns the number value.
- numberValue() - Method in interface nxopen.display.CgfxAttributeValueNumberBuilder
-
- numberValue - Variable in class nxopen.uf.UFPd.AttributeValue
-
- numberVcheckPoints() - Method in interface nxopen.geometricanalysis.DeviationChecking
-
- numberVertices() - Method in interface nxopen.geometricutilities.ShapeFrameBuilder
-
Returns the number of vertices of the frame
License requirements: None.
- numBndFaces - Variable in class nxopen.uf.UFSf.AskIdealizeRegionData
-
- numBodies - Variable in class nxopen.uf.UFModl.LinkedExt
-
- numbodies - Variable in class nxopen.uf.UFPart.ImportXtHiddenData
-
- numBound1Pts - Variable in class nxopen.uf.UFCurve.TrimMult
-
- numBound2Pts - Variable in class nxopen.uf.UFCurve.TrimMult
-
- numBoundaries - Variable in class nxopen.uf.UFDrf.AskBoundariesData
-
- numBoundaries - Variable in class nxopen.uf.UFModeling.AskBodyBoundariesData
-
- numBoundary - Variable in class nxopen.uf.UFModl.DfoRegion
-
- numCalloutStrings - Variable in class nxopen.uf.UFGdt.AskCalloutStringsData
-
- numCandidateFeatures() - Method in interface nxopen.features.shipdesign.ShipFeatureConverter
-
Returns the number of candidate features.
- numChains - Variable in class nxopen.uf.UFModl.ReblendFaceData
-
- numChangedObjs - Variable in class nxopen.assemblies.ClearanceSet.Summary
-
The number of objects that had
changed since the previous
clearance analysis.
- numChangedPairs - Variable in class nxopen.assemblies.ClearanceSet.Summary
-
The number of pairs that had
changed since the previous
clearance analysis.
- numChar() - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
Returns the number of characters
License requirements: None.
- numChars - Variable in class nxopen.uf.UFDrf.DraftAidText
-
- numCharx - Variable in class nxopen.uf.UFRoute.AskAppViewFabCharxData
-
- numCharx - Variable in class nxopen.uf.UFRoute.AskAppViewOptCharxData
-
- numCharx - Variable in class nxopen.uf.UFRoute.AskAppViewReqCharxData
-
- numCheckedPairs - Variable in class nxopen.assemblies.ClearanceSet.Summary
-
The total number of pairs that
underwent analysis.
- numChildren - Variable in class nxopen.uf.UFModeling.AskFeatRelativesData
-
- numChildren - Variable in class nxopen.uf.UFProcessAid.AskChildrenFeaturesData
-
- numChildren - Variable in class nxopen.uf.UFSmd.AskFpChildrenData
-
- numClasses - Variable in class nxopen.uf.UFKf.AskAllClassesData
-
- numClasses - Variable in class nxopen.uf.UFKf.AskClassesData
-
- numClasses - Variable in class nxopen.uf.UFKfUgmgr.AskUserDfaClassesData
-
- numClasses - Variable in class nxopen.uf.UFKfUgmgr.ListUserClassesReferencedData
-
- numClcs - Variable in class nxopen.uf.UFSf.AskCombinedLoadCasesData
-
- numClrPts - Variable in class nxopen.uf.UFModl.SmjoggleData
-
- numCol - Variable in class nxopen.uf.UFScop.AskRowColumnCountData
-
- numCollection1 - Variable in class nxopen.assemblies.ClearanceSet.Summary
-
The number of objects in collection 1.
- numCollection2 - Variable in class nxopen.assemblies.ClearanceSet.Summary
-
The number of objects in collection 2.
- numCollections - Variable in class nxopen.assemblies.ClearanceSet.Summary
-
Number of collections analyzed.
- numComplexSubFeatures - Variable in class nxopen.uf.UFGdt.AskComplexSubFeaturesData
-
- numcomponents - Variable in class nxopen.cae.ResultAccess.AskElementNodalResultAllComponentsData
-
- numComps - Variable in class nxopen.uf.UFRoute.AskHarnessCompsData
-
- numComps - Variable in class nxopen.uf.UFSf.AskCombinedLoadCaseData
-
- numConnections - Variable in class nxopen.uf.UFDrf.CustomSymbol
-
- numConns - Variable in class nxopen.uf.UFRoute.GetNextConnectionsData
-
- numCons - Variable in class nxopen.uf.UFSket.AskConstraintsOfSketchData
-
- numCons - Variable in class nxopen.uf.UFSket.AskGeoConsOfSketchData
-
- numCons - Variable in class nxopen.uf.UFSket.AskInferredConsOfSketchData
-
- numContactSide1 - Variable in class nxopen.uf.UFMotion.Motion3DContact
-
- numContactSide2 - Variable in class nxopen.uf.UFMotion.Motion3DContact
-
- numContainment - Variable in class nxopen.assemblies.ClearanceSet.Summary
-
The total number of containment
interferences.
- numContourLines - Variable in class nxopen.uf.UFSmd.AskContourLinesData
-
- numContours - Variable in class nxopen.uf.UFDisp.SrfanlData
-
- numControl - Variable in class nxopen.uf.UFEval.Spline
-
- numConvertedFeatures() - Method in interface nxopen.features.shipdesign.ShipFeatureConverter
-
Returns the number of converted features.
- numCopy() - Method in interface nxopen.cae.ElementTranslateBuilder
-
Returns the number of copies to be created for each selected element
License requirements: None.
- numCopy() - Method in interface nxopen.cae.NodeRotateBuilder
-
Returns the num copy
License requirements: None.
- numCopy() - Method in interface nxopen.cae.NodeTranslateBuilder
-
Returns the num copy
License requirements: None.
- numCrossSections - Variable in class nxopen.uf.UFRoute.AskStockDataCrossData
-
- numCurve1 - Variable in class nxopen.uf.UFMotion.Motion2DContact
-
- numCurve1Tags - Variable in class nxopen.uf.UFMotion.CurveCurveConstraint
-
- numCurve2 - Variable in class nxopen.uf.UFMotion.Motion2DContact
-
- numCurve2Tags - Variable in class nxopen.uf.UFMotion.CurveCurveConstraint
-
- numCurves - Variable in class nxopen.uf.UFCurve.AskFeatureCurvesData
-
- numCurves - Variable in class nxopen.uf.UFCurve.AskIntCurvesData
-
- numCurves - Variable in class nxopen.uf.UFCurve.AskOffsetCurvesData
-
- numCurves - Variable in class nxopen.uf.UFCurve.OcfAskCurvesData
-
- numCurves - Variable in class nxopen.uf.UFDraw.AskBoundaryCurvesData
-
- numCurves - Variable in class nxopen.uf.UFDraw.BreakoutData
-
- numCurves - Variable in class nxopen.uf.UFGdt.AskTagsData
-
- numCurves - Variable in class nxopen.uf.UFGdt.TargetUdefArea
-
- numCurves - Variable in class nxopen.uf.UFModl.SmpunchCutSets
-
- numCurves - Variable in class nxopen.uf.UFRoute.AskCrossCurvesData
-
- numCurveTags - Variable in class nxopen.uf.UFMotion.PointCurveConstraint
-
- numCutCurveSets - Variable in class nxopen.uf.UFModl.SmpunchData
-
- numCutDepthViolations() - Method in interface nxopen.cam.CutDepthChecker
-
Returns the number of cut depth violations
License requirements: None.
- numDatPoints - Variable in class nxopen.uf.UFProcessAid.AskDatumObjectsData
-
- numDatums - Variable in class nxopen.uf.UFGdt.AskDatumsOfFeatureData
-
- numDatums - Variable in class nxopen.uf.UFGdt.MultipleDatum
-
- numDatVectors - Variable in class nxopen.uf.UFProcessAid.AskDatumObjectsData
-
- numDef - Variable in class nxopen.uf.UFModl.UdfsExp
-
- numDevs - Variable in class nxopen.uf.UFModeling.DevchkAdjacentEdgesData
-
- numDimensionTags - Variable in class nxopen.uf.UFGdt.AnnotationTags
-
- numDimObj - Variable in class nxopen.uf.UFSket.ReadDimensionalConstraintData
-
- numDims - Variable in class nxopen.uf.UFSket.AskDimensionsOfSketchData
-
- numDplanes - Variable in class nxopen.uf.UFModlFeatures.CreateRelativeDplaneData
-
- numDrawings - Variable in class nxopen.uf.UFDraw.AskDrawingsData
-
- numDualText - Variable in class nxopen.uf.UFDrf.AskDimensionTextData
-
- numDurations - Variable in class nxopen.uf.UFAssem.AskStepElementDurationsData
-
- numEdges - Variable in class nxopen.uf.UFModeling.AskBodyBoundariesData
-
- numEdges - Variable in class nxopen.uf.UFModl.EdgeBlendSet
-
- numEdges - Variable in class nxopen.uf.UFModlFeatures.AskTaperFromEdgesData
-
- numEdges - Variable in class nxopen.uf.UFSf.AskElementEdgesData
-
- numEdges - Variable in class nxopen.uf.UFSf.BodyAskEdgesData
-
- numEdges - Variable in class nxopen.uf.UFSf.EdgeAskAdjacentEdgesData
-
- numEdges - Variable in class nxopen.uf.UFSf.EfConnInfo
-
- numEdges - Variable in class nxopen.uf.UFSf.FaceAskEdgesData
-
- numElements() - Method in interface nxopen.cae.ContactMeshBuilder
-
Returns the number of contact elements
License requirements: None.
- numElements() - Method in interface nxopen.cae.FEElementLabelMap
-
Returns the number of CAE.FEElement
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX6.0.2
- numElements - Variable in class nxopen.uf.UFSf.DispMesh
-
- numElementsOnRail1() - Method in interface nxopen.cae.MeshFromBoundaryBuilder
-
Returns the number of elements along rail1
License requirements: nx_masterfem ("Finite Element Modeling")
.
- numElementsOnRail2() - Method in interface nxopen.cae.MeshFromBoundaryBuilder
-
Returns the number of elements along rail2
License requirements: nx_masterfem ("Finite Element Modeling")
.
- numElemNodes - Variable in class nxopen.uf.UFSf.DispMesh
-
- numEntities - Variable in class nxopen.uf.UFDisp.J3dGeometryData
-
- numEntities - Variable in class nxopen.uf.UFModl.CompareEntityInfo
-
- numEntities - Variable in class nxopen.uf.UFModl.RoughOffset
-
- numerator() - Method in interface nxopen.drawings.ViewScaleBuilder
-
Returns the scale numerator
License requirements: None.
- numeratorDegrees() - Method in interface nxopen.annotations.UnitsFormatPreferences
-
Returns the numerator degrees of fractional display for angular dimension
License requirements: None.
- numeratorDegrees() - Method in interface nxopen.annotations.UnitsStyleBuilder
-
Returns the numerator degrees of fractional display for angular dimension
License requirements: None.
- numeratorFraction() - Method in interface nxopen.annotations.UnitsFormatPreferences
-
Returns the numerator fractional degrees of fractional display for angular dimension
License requirements: None.
- numeratorFraction() - Method in interface nxopen.annotations.UnitsStyleBuilder
-
Returns the numerator fractional degrees of fractional display for angular dimension
License requirements: None.
- numeratorMinutes() - Method in interface nxopen.annotations.UnitsFormatPreferences
-
Returns the numerator minutes of fractional display for angular dimension
License requirements: None.
- numeratorMinutes() - Method in interface nxopen.annotations.UnitsStyleBuilder
-
Returns the numerator minutes of fractional display for angular dimension
License requirements: None.
- numeratorSeconds() - Method in interface nxopen.annotations.UnitsFormatPreferences
-
Returns the numerator seconds of fractional display for angular dimension
License requirements: None.
- numeratorSeconds() - Method in interface nxopen.annotations.UnitsStyleBuilder
-
Returns the numerator seconds of fractional display for angular dimension
License requirements: None.
- NUMERIC - Static variable in class nxopen.drawings.ViewCommonViewLabelBuilder.SecondaryIndexingType
-
- NUMERIC - Static variable in class nxopen.NXObject.DateAndTimeFormat
-
2004/04/28 22:06:15
- NUMERIC - Static variable in class nxopen.partfamily.FamilyAttribute.AttrType
-
numeric attribute
- NUMERIC - Static variable in class nxopen.tooling.HoleManufacturingNoteBuilder.HoleIndexType
-
- NUMERIC_TYPE - Static variable in class nxopen.Part.PartFamilyAttrType
-
Deprecated.
numeric attribute
- numErrors - Variable in class nxopen.uf.UFStd.ImportVrmlFileData
-
- numErrors - Variable in class nxopen.uf.UFStd.PutSheetsInStlFileData
-
- numErrors - Variable in class nxopen.uf.UFStd.PutSolidInStlFileData
-
- numExclude - Variable in class nxopen.uf.UFModl.DfoRegion
-
- numExcludedPairs - Variable in class nxopen.assemblies.ClearanceSet.Summary
-
The number of pairs that were
excluded from analysis, either
due to exclusion rules or
explicit pair exclusion.
- numExp - Variable in class nxopen.uf.UFModl.UdfsDefData
-
- numExpression - Variable in class nxopen.uf.UFModlGeneral.AskUdfDefinitionData
-
- numExpressions - Variable in class nxopen.uf.UFAssem.AssemblyDeformPartData
-
- numExpressions - Variable in class nxopen.uf.UFAssem.DeformedDefinitionData
-
- numExps - Variable in class nxopen.uf.UFModl.UdfExpData
-
- numExps - Variable in class nxopen.uf.UFSket.AskExpsOfSketchData
-
- numExtractedObjs - Variable in class nxopen.uf.UFSket.AddExtractedObjectsData
-
- numFaces - Variable in class nxopen.uf.UFDie.AskDrawFacesData
-
- numFaces - Variable in class nxopen.uf.UFGdt.AskFacesData
-
- numFaces - Variable in class nxopen.uf.UFGdt.SurfaceParms
-
- numFaces - Variable in class nxopen.uf.UFModl.IdentifyExteriorUsingHlData
-
- numFaces - Variable in class nxopen.uf.UFModl.IdentifyExteriorUsingRaysData
-
- numFaces - Variable in class nxopen.uf.UFModl.LinkedExt
-
- numFaces - Variable in class nxopen.uf.UFSf.AskIdealizeParmFacesData
-
- numFaces - Variable in class nxopen.uf.UFSf.BodyAskFacesData
-
- numFaces - Variable in class nxopen.uf.UFSf.EdgeAskFacesData
-
- numFaces - Variable in class nxopen.uf.UFSf.EfConnInfo
-
- numFaces - Variable in class nxopen.uf.UFSf.FaceAskAdjacentFacesData
-
- numFaces - Variable in class nxopen.uf.UFSmd.AskFpFacesData
-
- numFaceTags - Variable in class nxopen.uf.UFMotion.PointOnSurfaceData
-
- numFacets - Variable in class nxopen.uf.UFStd.ImportStlBinaryFileData
-
- numFailed - Variable in class nxopen.Part.UpdateStatusReportData
-
number of failed features
- numFcfs - Variable in class nxopen.uf.UFGdt.AskDatumReferencersData
-
- numFcfs - Variable in class nxopen.uf.UFGdt.AskFcfTagsData
-
- numFeature - Variable in class nxopen.uf.UFModeling.AskOutOfDateFeaturesData
-
- numFeature - Variable in class nxopen.uf.UFModlGeneral.AskFeaturesOfUdfData
-
- numFeatureControlFrameTags - Variable in class nxopen.uf.UFGdt.AnnotationTags
-
- numfilters - Variable in class nxopen.routing.ReuseLibrary.SpecificationsGetAttributeRelationshipsData
-
- numFormblkLines - Variable in class nxopen.uf.UFSmd.AskFormblkLinesData
-
- numFound - Variable in class nxopen.uf.UF.FindAllSubdirectoriesData
-
- numFrecs - Variable in class nxopen.uf.UFModl.UdfsDefData
-
- numFuncs - Variable in class nxopen.uf.UFKfUgmgr.AskUserDfaFuncsData
-
- numFuncs - Variable in class nxopen.uf.UFKfUgmgr.ListUserFuncsReferencedData
-
- numFunctions - Variable in class nxopen.uf.UFMotion.FindAllFunctionsData
-
- numGeometry - Variable in class nxopen.uf.UFDrf.CustomSymbol
-
- numGeometryReferences - Variable in class nxopen.uf.UFPd.ProductDefinition
-
- numGeometryTags - Variable in class nxopen.uf.UFMotion.Link
-
- numGeomItems - Variable in class nxopen.uf.UFSf.AskGeomData
-
- numGeoms - Variable in class nxopen.uf.UFModl.WrapAssem
-
- numGeoms - Variable in class nxopen.uf.UFModl.WrapGeom
-
- numGeoms - Variable in class nxopen.uf.UFSket.AskGeomsOfSketchData
-
- numGroups - Variable in class nxopen.uf.UFModl.AskLinkedExteriorData
-
- numHard - Variable in class nxopen.assemblies.ClearanceSet.Summary
-
The total number of hard
interferences.
- numHarness - Variable in class nxopen.uf.UFRoute.AskStockHarnessData
-
- numHarness - Variable in class nxopen.uf.UFRoute.AskWireHarnessData
-
- numInfpts - Variable in class nxopen.uf.UFCurve.AskCurveInflectionsData
-
- numInputCurves - Variable in class nxopen.uf.UFCurve.WrapData
-
- numInstances - Variable in class nxopen.uf.UFGdt.AskTolFeatInstanceData
-
- numInstances - Variable in class nxopen.uf.UFModlGeneral.AskPromotionPathData
-
- numInstances - Variable in class nxopen.uf.UFPd.AskProductDefinitionsInstancesData
-
- numInstantaneousRotational - Variable in class nxopen.assemblies.DegreesOfFreedom
-
Number of instantaneous rotational degrees of freedom.
- numInstantaneousTranslational - Variable in class nxopen.assemblies.DegreesOfFreedom
-
Number of instantaneous translational degrees of freedom.
- numInter() - Method in interface nxopen.tooling.DirectUnfoldBuilder
-
Returns the number of intermediate stages.
- numInterferenceBodies - Variable in class nxopen.uf.UFMotion.CreateInterferenceBodyData
-
- numIntermediates - Variable in class nxopen.uf.UFGdt.LeaderSpec
-
- numIntersections - Variable in class nxopen.uf.UFModeling.IntersectCurveToCurveData
-
- numIntersections - Variable in class nxopen.uf.UFModeling.IntersectCurveToFaceData
-
- numIntersections - Variable in class nxopen.uf.UFModeling.IntersectCurveToPlaneData
-
- numInts - Variable in class nxopen.uf.UFDrf.DraftAidText
-
- numKeywords - Variable in class nxopen.uf.UFGdt.AskDatumKeywordsData
-
- numKnots - Variable in class nxopen.uf.UFEval.Spline
-
- numLayers() - Method in interface nxopen.cae.SweepBetweenMeshBuilder
-
- numLeaders - Variable in class nxopen.uf.UFDrf.GdtLeader
-
- numLeaders - Variable in class nxopen.uf.UFDrf.GdtSymbolInfo
-
- numLeaders - Variable in class nxopen.uf.UFDrf.IdSymbolInfo
-
- numLeaders - Variable in class nxopen.uf.UFDrf.LabelInfo
-
- numLeaders - Variable in class nxopen.uf.UFDrf.Leader
-
- numLeaders - Variable in class nxopen.uf.UFDrf.LeaderData
-
- numLeg1Sxsegs - Variable in class nxopen.uf.UFDraw.AskRevolvedSxlineData
-
- numLevels - Variable in class nxopen.uf.UFCutLevels.CutLevels
-
- numLinebks - Variable in class nxopen.uf.UFDrf.LeaderInfo
-
- numLines - Variable in class nxopen.uf.UFDrf.AppendedText
-
- numLines - Variable in class nxopen.uf.UFDrf.AskIdSymbolGeometryData
-
- numLines - Variable in class nxopen.uf.UFDrf.AssortpartLine
-
- numLines - Variable in class nxopen.uf.UFDrf.CenterlineInfo
-
- numLines - Variable in class nxopen.uf.UFDrf.DimInfo
-
- numLines - Variable in class nxopen.uf.UFDrf.DraftAidTextInfo
-
- numLines - Variable in class nxopen.uf.UFDrf.WeldSymbols
-
- numLines - Variable in class nxopen.uf.UFGdt.AskAppendedTextData
-
- numLines - Variable in class nxopen.uf.UFMotion.Function
-
- numLineSegments - Variable in class nxopen.uf.UFDrf.AssortpartLine
-
- numLinesText - Variable in class nxopen.uf.UFDrf.AssortpartText
-
- numLinked - Variable in class nxopen.uf.UFGdt.AskLinkedFeaturesData
-
- numLists - Variable in class nxopen.uf.UFClear.Summary
-
- numLoops - Variable in class nxopen.uf.UFModlGeneral.CreateBsEdgesData
-
- numLv - Variable in class nxopen.uf.UFSf.DursolLocateAllMembersNxData
-
- numMainText - Variable in class nxopen.uf.UFDrf.AskDimensionTextData
-
- numMembers - Variable in class nxopen.uf.UFAssem.AskRefSetData
-
- numMembers - Variable in class nxopen.uf.UFBound.AllData
-
- numMembers - Variable in class nxopen.uf.UFDrf.AskCalloutRowMembersData
-
- numMembers - Variable in class nxopen.uf.UFSf.AskSolutionNxData
-
- numMembers - Variable in class nxopen.uf.UFSf.AskStepNxData
-
- numMembers - Variable in class nxopen.uf.UFSf.LocateSolutionBoundaryConditionsNxData
-
- numMembers - Variable in class nxopen.uf.UFSf.LocateSolutionLoadsNxData
-
- numMembers - Variable in class nxopen.uf.UFSf.LocateStepBoundaryConditionsNxData
-
- numMembers - Variable in class nxopen.uf.UFSf.LocateStepLoadsNxData
-
- numMeshErrors - Variable in class nxopen.uf.UFSf.MeshErrorList
-
- numMeshes - Variable in class nxopen.uf.UFSf.AutoCreateSurfaceContactMeshData
-
- numMeshpoints() - Method in interface nxopen.cae.MeshPointMultipleOnCurveBuilder
-
Returns the number of meshpoints
License requirements: None.
- numModifiers - Variable in class nxopen.uf.UFGdt.DatumReference
-
- numModifiers - Variable in class nxopen.uf.UFPd.AskBusinessProcessModifiersData
-
- numModlFeatures - Variable in class nxopen.uf.UFGdt.AskModlFeaturesData
-
- numModlFeatures - Variable in class nxopen.uf.UFGdt.ModlData
-
- numNegated - Variable in class nxopen.uf.UFStd.PutSheetsInStlFileData
-
- numNewAllInterf - Variable in class nxopen.assemblies.ClearanceSet.Summary
-
The total number of new
interferences.
- numNewContainment - Variable in class nxopen.assemblies.ClearanceSet.Summary
-
The total number of new containment
interferences.
- numNewHard - Variable in class nxopen.assemblies.ClearanceSet.Summary
-
The total number of new hard
interferences.
- numNewObjs - Variable in class nxopen.uf.UFSket.MirrorObjectsData
-
- numNewSegments - Variable in class nxopen.uf.UFRoute.SimplifySegmentsData
-
- numNewSoft - Variable in class nxopen.assemblies.ClearanceSet.Summary
-
The total number of new soft
interferences.
- numNewTouching - Variable in class nxopen.assemblies.ClearanceSet.Summary
-
The total number of new touching
interferences.
- numNodes() - Method in interface nxopen.cae.FENodeLabelMap
-
Returns the number of CAE.FENode
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX6.0.2
- numNodes() - Method in interface nxopen.cae.NodesBetweenNodesBuilder
-
Returns the num nodes
License requirements: None.
- numNodes() - Method in interface nxopen.cae.NodesOnCurveBuilder
-
Returns the num nodes
License requirements: None.
- numNodes - Variable in class nxopen.uf.UFSf.DispMesh
-
- numNonBlend - Variable in class nxopen.uf.UFModlFeatures.AskReplaceFaceData
-
- numNonBlend - Variable in class nxopen.uf.UFModlFeatures.AskResizeFaceData
-
- numNonDimensionalLeaders - Variable in class nxopen.uf.UFGdt.AnnotationTags
-
- numNotes - Variable in class nxopen.uf.UFDraw.AskViewNotesData
-
- numObjects - Variable in class nxopen.uf.UFCurve.SectionGeneralData
-
- numObjects - Variable in class nxopen.uf.UFDraw.AskBoundByObjectsData
-
- numObjects - Variable in class nxopen.uf.UFDraw.AskDisplayedObjectsData
-
- numObjects - Variable in class nxopen.uf.UFModl.AskExtrusionData
-
- numObjects - Variable in class nxopen.uf.UFModl.AskRevolutionData
-
- numObjects - Variable in class nxopen.uf.UFRoute.DesignRuleData
-
- numObjects - Variable in class nxopen.uf.UFRule.AskVioObjectsData
-
- numObjects - Variable in class nxopen.uf.UFSmd.ChkStdResults
-
- numObjects - Variable in class nxopen.uf.UFUi.AskGlobalSelObjectListData
-
- numObjects - Variable in class nxopen.uf.UFWeld.AskBodyIdData
-
- numObjectsSet1 - Variable in class nxopen.uf.UFCurve.AskIntParmsData
-
- numObjectsSet1 - Variable in class nxopen.uf.UFCurve.AskIntParmsScData
-
- numObjectsSet2 - Variable in class nxopen.uf.UFCurve.AskIntParmsData
-
- numObjectsSet2 - Variable in class nxopen.uf.UFCurve.AskIntParmsScData
-
- numObjs - Variable in class nxopen.uf.UFDrf.AskObjectsControlledByExpData
-
- numObjs - Variable in class nxopen.uf.UFRoute.AskBuiltInPathObjsData
-
- numObjs - Variable in class nxopen.uf.UFRoute.AskRouteObjsData
-
- numOfClassifiedSets - Variable in class nxopen.uf.UFFbmGeom.ClassifyByCriteriaData
-
- numOfCopyInstance() - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
Returns the num of copy or instance
License requirements: None.
- numOfCopyInstance() - Method in interface nxopen.cam.OperationTransformBuilder
-
Returns the num of copy or instance
License requirements: None.
- numOfElements() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the number of elements defined on edge.
- numOfElements - Variable in class nxopen.uf.UFSf.LocateElementByIdData
-
- numOfElements - Variable in class nxopen.uf.UFSf.LocateElementData
-
- numOffsets - Variable in class nxopen.uf.UFCurve.OcfStringData
-
- numOfMeshes - Variable in class nxopen.uf.UFSf.FindMeshData
-
- numOfNode - Variable in class nxopen.uf.UFSf.LocateNodeByIdData
-
- numOfNodes - Variable in class nxopen.uf.UFSf.LocateNodesOnElementData
-
- numOfNodes - Variable in class nxopen.uf.UFSf.LocateNodesOnMeshData
-
- numofpasses - Variable in class nxopen.cam.MultipleStepoverBuilder.Data
-
the new value of num of passes
- numOfPts - Variable in class nxopen.uf.UFSmd.EvalTrimAnglesData
-
- numOfSegments() - Method in interface nxopen.features.subdivision.SubdivisionRevolveBuilder
-
Returns the number of segments.
- numOfStrokes - Variable in class nxopen.uf.UFDrf.AskEmbeddedUdsFontInfoData
-
- numOfUdes - Variable in class nxopen.uf.UFParam.AskUdesData
-
- numOptionalStrings - Variable in class nxopen.uf.UFDrf.CustomSymbolText
-
- numOutputCurves - Variable in class nxopen.uf.UFCurve.AskWrapCurvesData
-
- nump - Variable in class nxopen.uf.UFSo.SplineData
-
- numPairs - Variable in class nxopen.assemblies.ClearanceSet.Summary
-
The number of pairs built from
the object collections.
- numParams - Variable in class nxopen.uf.UFFacet.AskParamsOfFacetData
-
- numParams - Variable in class nxopen.uf.UFKf.AskParametersData
-
- numParentEntities - Variable in class nxopen.uf.UFModl.AskEntityParentsData
-
- numParents - Variable in class nxopen.uf.UFAssem.AssemblyDeformPartData
-
- numParents - Variable in class nxopen.uf.UFAssem.DeformedDefinitionData
-
- numParents - Variable in class nxopen.uf.UFModeling.AskFeatRelativesData
-
- numParents - Variable in class nxopen.uf.UFModeling.AskReferencesOfFeaturesData
-
- numParents - Variable in class nxopen.uf.UFModlGeneral.AskUdfDefinitionData
-
- numPartitionedBodies - Variable in class nxopen.uf.UFSf.PartitionBodyData
-
- numPartitionedBodies - Variable in class nxopen.uf.UFSf.PartitionBodyNx5Data
-
- numPartOccs - Variable in class nxopen.uf.UFAssem.AskPartOccurrenceOfStepData
-
- numPartRcps - Variable in class nxopen.uf.UFRoute.AskPartRcpsData
-
- numParts - Variable in class nxopen.uf.UFRoute.AskSegmentIntPartsData
-
- numPartSegs - Variable in class nxopen.uf.UFRoute.AskPartSegsData
-
- numPaths - Variable in class nxopen.uf.UFRoute.AskBuiltInPathsData
-
- numPaths - Variable in class nxopen.uf.UFRoute.AskSegmentsPathsData
-
- numPlaces - Variable in class nxopen.uf.UFRoute.SolvePlacesData
-
- numPlanes - Variable in class nxopen.uf.UFCurve.SectionPlanesData
-
- numPoints() - Method in interface nxopen.cam.InspectionPathBuilder
-
Returns the number of points in the path
License requirements: None.
- numPoints() - Method in interface nxopen.fields.FieldVariable
-
Returns the number of points used for this variable when generating a table
License requirements: None.
- numPoints - Variable in class nxopen.uf.UFCurve.AskSplineThruPtsData
-
- numPoints - Variable in class nxopen.uf.UFCurve.SectionPerpcrvData
-
- numPoints - Variable in class nxopen.uf.UFDrf.IntermediatePoints
-
- numPoints - Variable in class nxopen.uf.UFModeling.AskPointsParmsData
-
- numPoints - Variable in class nxopen.uf.UFModl.BsurfRowInfo
-
- numPoles - Variable in class nxopen.uf.UFCurve.Spline
-
- numPolesU - Variable in class nxopen.uf.UFModl.Bsurface
-
- numPolesV - Variable in class nxopen.uf.UFModl.Bsurface
-
- numPolygonBodies - Variable in class nxopen.uf.UFSf.AskAllPolygonBodiesData
-
- numPorts - Variable in class nxopen.uf.UFRoute.AskObjectPortData
-
- numPorts - Variable in class nxopen.uf.UFRoute.AskPartOccPortsData
-
- numPorts - Variable in class nxopen.uf.UFRoute.AskRcpPortsData
-
- numPrinterGroups - Variable in class nxopen.uf.UFPlot.AskPrinterGroupsData
-
- numPrinters - Variable in class nxopen.uf.UFPlot.AskPrinterNamesData
-
- numProductAttributes - Variable in class nxopen.uf.UFPd.AskProductAttribuesData
-
- numProductAttributes - Variable in class nxopen.uf.UFPd.AskProductAttributesData
-
- numProductAttributes - Variable in class nxopen.uf.UFPd.ProductDefinition
-
- numProductAtts - Variable in class nxopen.uf.UFGdt.AskProductAttributesData
-
- numProductDefinitions - Variable in class nxopen.uf.UFPd.AskProductDefinitionsData
-
- numProductDefinitions - Variable in class nxopen.uf.UFPd.AskProductDefinitionsOfGeometryData
-
- numProfiles - Variable in class nxopen.uf.UFPlot.AskProfileNamesData
-
- numRadii - Variable in class nxopen.uf.UFModeling.AskFaceMinRadiiData
-
- numRanges - Variable in class nxopen.uf.UFSf.ColorAttr
-
- numRef - Variable in class nxopen.uf.UFModl.UdfsDefData
-
- numReflLines - Variable in class nxopen.uf.UFDisp.SrfanlData
-
- numRefSets - Variable in class nxopen.uf.UFAssem.AskRefSetsData
-
- numRegions - Variable in class nxopen.uf.UFDraw.AskBreakRegionsData
-
- numRemaining - Variable in class nxopen.uf.UFRoute.MergeRcpsData
-
- numResult - Variable in class nxopen.uf.UFModeling.IntersectBodiesData
-
- numResult - Variable in class nxopen.uf.UFModeling.SubtractBodiesData
-
- numResults - Variable in class nxopen.uf.UFModeling.TraceARayData
-
- numRootDepth - Variable in class nxopen.uf.UFDrf.WeldSymInfo
-
- numRotational - Variable in class nxopen.assemblies.DegreesOfFreedom
-
Number of static and free rotational degrees of freedom.
- numRoutes - Variable in class nxopen.uf.UFRoute.AskSegmentRoutesData
-
- numRow - Variable in class nxopen.uf.UFScop.AskRowColumnCountData
-
- numRules - Variable in class nxopen.uf.UFKf.AskRulesData
-
- numRules - Variable in class nxopen.uf.UFKf.AskRulesOfClassData
-
- numRules - Variable in class nxopen.uf.UFRule.AskFunctionRulesData
-
- numsection - Variable in class nxopen.geometricutilities.AlignmentMethodBuilder.AllPointsData
-
Number of sections returned
- numSections - Variable in class nxopen.uf.UFProcessAid.AskSectionOfDatumData
-
- numSeed - Variable in class nxopen.uf.UFModl.DfoRegion
-
- numSegments() - Method in interface nxopen.features.subdivision.SubdivisionBridgeFaceBuilder
-
Returns the number of segments in the output bridge faces
License requirements: None.
- numSegments - Variable in class nxopen.uf.UFDraw.AskSimplifiedCurveData
-
- numSegments - Variable in class nxopen.uf.UFDraw.CreateSimplifiedCurveData
-
- numSegments - Variable in class nxopen.uf.UFDrf.AskAnnData
-
- numSegments - Variable in class nxopen.uf.UFDrf.DraftAidLine
-
- numSegments - Variable in class nxopen.uf.UFRoute.AskStockSegmentsData
-
- numSegments - Variable in class nxopen.uf.UFRoute.AskWireSegmentsData
-
- numSegs - Variable in class nxopen.uf.UFRoute.AskRcpSegmentsData
-
- numSegs - Variable in class nxopen.uf.UFRoute.AskRcpSegsData
-
- numSequences - Variable in class nxopen.uf.UFAssem.AskSequencesInPartData
-
- numSetback - Variable in class nxopen.uf.UFModl.EdgeBlendMultData
-
- numSets - Variable in class nxopen.uf.UFModl.EdgeBlendMultData
-
- numSets - Variable in class nxopen.uf.UFProcessAid.AskDatumObjectsData
-
- numSets - Variable in class nxopen.uf.UFWeld.AskSpotFaceData
-
- numSets - Variable in class nxopen.uf.UFWeld.AskSpotFaceInfoData
-
- numSheetBodies - Variable in class nxopen.uf.UFSf.MidsrfUserParms
-
- numSheets - Variable in class nxopen.uf.UFDraw.RetrieveDrawingCgmData
-
- numSilhouettes - Variable in class nxopen.uf.UFDraw.AskBodySilsInViewData
-
- numSilhouettes - Variable in class nxopen.uf.UFDraw.AskFaceSilsInViewData
-
- numSmoothIterations() - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder
-
Returns the number of iterations for normal smoothing
License requirements: None.
- numSoft - Variable in class nxopen.assemblies.ClearanceSet.Summary
-
The total number of soft
interferences.
- numSplitBodies - Variable in class nxopen.uf.UFModeling.SplitBodyData
-
- numSplitBodies - Variable in class nxopen.uf.UFModeling.SplitBodyRetainToolData
-
- numSplits - Variable in class nxopen.uf.UFModl.WrapAssem
-
- numSplits - Variable in class nxopen.uf.UFModl.WrapGeom
-
- numStarts - Variable in class nxopen.uf.UFModl.SymbThreadData
-
- numStates - Variable in class nxopen.uf.UFCurve.CreateSplineData
-
- numStates - Variable in class nxopen.uf.UFCurve.FixSplineData
-
- numStates - Variable in class nxopen.uf.UFCurve.SmoothSplineData
-
- numStates - Variable in class nxopen.uf.UFCurve.SmoothSplineDataStData
-
- numStates - Variable in class nxopen.uf.UFModlGeneral.CreateBsurfaceData
-
- numStates - Variable in class nxopen.uf.UFModlGeneral.FixBsurfaceData
-
- numStates - Variable in class nxopen.uf.UFModlGeneral.SmoothBsurfaceData
-
- numSteps - Variable in class nxopen.uf.UFAssem.AskStepsData
-
- numSteps - Variable in class nxopen.uf.UFAssem.AskStepsOfPartOccData
-
- numStock - Variable in class nxopen.uf.UFRoute.AskSegmentStockData
-
- numStock - Variable in class nxopen.uf.UFRoute.AskStockDataStockData
-
- numStock - Variable in class nxopen.uf.UFRoute.AskWireStockData
-
- numStockData - Variable in class nxopen.uf.UFRoute.AskAnchorStockData
-
- numStockData - Variable in class nxopen.uf.UFRoute.AskCrossStockData
-
- numStocks - Variable in class nxopen.uf.UFRoute.AskAnchorStock
-
- numStopshort - Variable in class nxopen.uf.UFModl.EdgeBlendMultData
-
- numStringData - Variable in class nxopen.uf.UFCurve.OcfData
-
- numStrings - Variable in class nxopen.uf.UFPd.AttributeValueString
-
- numStrings - Variable in class nxopen.uf.UFRoute.AskMultiportStringsData
-
- numStrips - Variable in class nxopen.uf.UFDisp.J3dEntity
-
- numStroke - Variable in class nxopen.uf.UFDrf.UdSymbolFontInfo
-
- numStrs - Variable in class nxopen.uf.UFSfLegend.Title
-
- numStyles - Variable in class nxopen.uf.UFUgfont.AskFontStylesData
-
- numSubfeats - Variable in class nxopen.uf.UFModl.AskLinkedExteriorData
-
- numSubFeatures - Variable in class nxopen.uf.UFGdt.AskSubFeaturesData
-
- numSxedges - Variable in class nxopen.uf.UFDraw.AskSxedgesOfSxsolidData
-
- numSxsegs - Variable in class nxopen.uf.UFDraw.AskHalfSxlineData
-
- numSxsegs - Variable in class nxopen.uf.UFDraw.AskPictorialSxlineData
-
- numSxsegs - Variable in class nxopen.uf.UFDraw.AskRevolvedSxlineData
-
- numSxsegs - Variable in class nxopen.uf.UFDraw.AskSimpleSxlineData
-
- numSxsegs - Variable in class nxopen.uf.UFDraw.AskSteppedSxlineData
-
- numSxsegs - Variable in class nxopen.uf.UFDraw.AskUnfoldedSxlineData
-
- numSxsolids - Variable in class nxopen.uf.UFDraw.AskSxsolidsOfSxviewData
-
- numSxviews - Variable in class nxopen.uf.UFDraw.AskHalfSxlineData
-
- numSxviews - Variable in class nxopen.uf.UFDraw.AskPictorialSxlineData
-
- numSxviews - Variable in class nxopen.uf.UFDraw.AskRevolvedSxlineData
-
- numSxviews - Variable in class nxopen.uf.UFDraw.AskSimpleSxlineData
-
- numSxviews - Variable in class nxopen.uf.UFDraw.AskSteppedSxlineData
-
- numSxviews - Variable in class nxopen.uf.UFDraw.AskUnfoldedSxlineData
-
- numSymbols - Variable in class nxopen.uf.UFDrf.ArcInfo
-
- numSymbols - Variable in class nxopen.uf.UFDrf.AskSymbolDataFromNameData
-
- numSymbols - Variable in class nxopen.uf.UFDrf.AskUdSymbolFontInfoData
-
- numSymbols - Variable in class nxopen.uf.UFDrf.DraftAidLine
-
- numSystemInterfaces - Variable in class nxopen.uf.UFRoute.AskAppViewSysIntsData
-
- numTables - Variable in class nxopen.uf.UFRoute.AskLoadedBendTablesData
-
- numTabs() - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
Returns the Tab Points
License requirements: cam_base ("CAM BASE")
.
- numTabs() - Method in interface nxopen.cam.WedmGeomBuilder
-
Returns the Tab Points
License requirements: cam_base ("CAM BASE")
.
- numTabs() - Method in interface nxopen.cam.WedmOperationBuilder
-
Returns the Tab Points
License requirements: cam_base ("CAM BASE")
.
- numTags - Variable in class nxopen.uf.UFModeling.AskBodyConsistencyData
-
- numTags - Variable in class nxopen.uf.UFModeling.AskBodyStructuresData
-
- numTags - Variable in class nxopen.uf.UFModeling.AskFaceFaceIntersectData
-
- numTags - Variable in class nxopen.uf.UFMotion.TraceModelData
-
- numTags - Variable in class nxopen.uf.UFRoute.AskMultiportTagsData
-
- numTarget - Variable in class nxopen.uf.UFModlFeatures.AskReplaceFaceData
-
- numTarget - Variable in class nxopen.uf.UFModlFeatures.AskResizeFaceData
-
- numTargets - Variable in class nxopen.uf.UFGdt.AskTargetsOfDatumData
-
- numTerms - Variable in class nxopen.uf.UFRoute.AskMultiportTerminalsData
-
- numTerms - Variable in class nxopen.uf.UFRoute.AskPortTerminalPortsData
-
- numText - Variable in class nxopen.uf.UFDrf.AskAppendedTextData
-
- numText - Variable in class nxopen.uf.UFDrf.AskDraftAidTextInfoData
-
- numText - Variable in class nxopen.uf.UFDrf.AssortpartText
-
- numText - Variable in class nxopen.uf.UFDrf.CustomSymbol
-
- numText - Variable in class nxopen.uf.UFDrf.DimInfo
-
- numText - Variable in class nxopen.uf.UFDrf.GdtSymbolInfo
-
- numText - Variable in class nxopen.uf.UFDrf.IdSymbolInfo
-
- numText - Variable in class nxopen.uf.UFDrf.LabelInfo
-
- numThruBodies - Variable in class nxopen.uf.UFModl.SweepTrimObject
-
- numTitles - Variable in class nxopen.uf.UFSfLegend.IndexTextAttr
-
- numToleranceFeatures - Variable in class nxopen.uf.UFGdt.AskFeaturesOfFaceData
-
- numTolerances - Variable in class nxopen.uf.UFGdt.AskTolerancesData
-
- numTopArray - Variable in class nxopen.uf.UFModl.DimensionData
-
- numTopOffLevels - Variable in class nxopen.uf.UFCutLevels.CutLevels
-
- numTopologies - Variable in class nxopen.uf.UFStd.ImportStlAsciiFileData
-
- numTouching - Variable in class nxopen.assemblies.ClearanceSet.Summary
-
The total number of touching
interferences.
- numTranslational - Variable in class nxopen.assemblies.DegreesOfFreedom
-
Number of static and free translational degrees of freedom.
- numTriaxialSensors() - Method in interface nxopen.cae.PreTestSensorConfigBuilder
-
Returns the number of triaxial sensors to select
License requirements: None.
- numTypes - Variable in class nxopen.uf.UFGdt.AskToleranceTypesData
-
- numTypes - Variable in class nxopen.uf.UFKf.AskRuleTypesData
-
- numUniaxialSensors() - Method in interface nxopen.cae.PreTestSensorConfigBuilder
-
Returns the number of uniaxial sensors to select
License requirements: None.
- numUnprocessedPartoccs - Variable in class nxopen.uf.UFAssem.AskUnprocessedPartoccsData
-
- numUPoints - Variable in class nxopen.cae.SimBCDisplay.DisplayGridData
-
number of points in the first parametric direction
- numUsed - Variable in class nxopen.uf.UFRoute.TagList
-
- numValues - Variable in class nxopen.uf.UFModlGeneral.AskUdfParmsData
-
- numValues - Variable in class nxopen.uf.UFSfLegend.IndexColorAttr
-
- numVarRad - Variable in class nxopen.uf.UFModl.EdgeBlendMultData
-
- numVents() - Method in interface nxopen.features.shipdesign.SteelVentHolesBuilder
-
Returns the number of vent holes.
- numVertices - Variable in class nxopen.uf.UFFacet.AskNormalsOfFacetData
-
- numVertices - Variable in class nxopen.uf.UFFacet.AskVerticesOfFacetData
-
- numViews - Variable in class nxopen.uf.UFDraw.AskViewsData
-
- numViews - Variable in class nxopen.uf.UFView.AskViewsOfViewSetData
-
- numViolations - Variable in class nxopen.uf.UFRoute.CheckDesignRulesData
-
- numViolations - Variable in class nxopen.uf.UFRule.AskObjectViolationsData
-
- numViolations - Variable in class nxopen.uf.UFRule.AskOverrideViolationsData
-
- numViolations - Variable in class nxopen.uf.UFRule.AskRuleViosData
-
- numViolations - Variable in class nxopen.uf.UFRule.AskRuleViosSinceData
-
- numVirts - Variable in class nxopen.uf.UFRoute.AskMultiportTerminalsData
-
- numVPoints - Variable in class nxopen.cae.SimBCDisplay.DisplayGridData
-
number of points in the second parametric direction
- numWarnings - Variable in class nxopen.uf.UFAssem.DeformPartWarnings
-
- numWarnings - Variable in class nxopen.uf.UFStd.ImportVrmlFileData
-
- numWires - Variable in class nxopen.uf.UFRoute.AskHarnessWiresData
-
- numWires - Variable in class nxopen.uf.UFRoute.AskSegmentWiresData
-
- numWires - Variable in class nxopen.uf.UFRoute.AskStockWiresData
-
- numWrapFaces - Variable in class nxopen.uf.UFCurve.WrapData
-
- numX - Variable in class nxopen.uf.UFModlFeatures.AskRectangularPatternFaceData
-
- numY - Variable in class nxopen.uf.UFModlFeatures.AskRectangularPatternFaceData
-
- numZones - Variable in class nxopen.assemblies.ClearanceSet.Summary
-
The number of assembly zones used
by the analysis (batch only).
- numZones - Variable in class nxopen.uf.UFClear.Summary
-
- numZonesCreated - Variable in class nxopen.uf.UFFltr.AutoCreateBoxZonesData
-
- numZonesCreated - Variable in class nxopen.uf.UFFltr.AutoCreatePlaneZonesData
-
- nurbAngleTolerance() - Method in interface nxopen.cam.ArcOutputTypeCiBuilder
-
Returns the nurb angle tolerance
License requirements: None.
- nurbFitTolerance() - Method in interface nxopen.cam.ArcOutputTypeCiBuilder
-
Returns the nurb fit tolerance
License requirements: None.
- nurbJoinSegments() - Method in interface nxopen.cam.ArcOutputTypeCiBuilder
-
Returns the nurb join segments
License requirements: None.
- NURBS - Static variable in class nxopen.cam.ArcOutputTypeCiBuilder.OutputTypes
-
nurbs
- NUT - Static variable in class nxopen.routing.ReuseLibrary.PartType
-
Nut Post Placement Type
- nut - Variable in class nxopen.routing.ReuseLibrary.SpecificationsGetConnectionPostPlacementData
-
Whether or not to place Nuts for this connection.
- nut - Variable in class nxopen.routing.ReuseLibrary.SpecificationsGetReportInBomData
-
Report Nuts
- nutEdge() - Method in interface nxopen.cae.BoltBuilder
-
Returns the selected nut edge(s)
License requirements: None.
- nutPoint() - Method in interface nxopen.cae.BoltBuilder
-
Returns the nut point(s)
License requirements: None.
- nutSelectionType() - Method in interface nxopen.cae.BoltBuilder
-
Returns the nut selection type
License requirements: None.
- nutSpiderDiameter() - Method in interface nxopen.cae.BoltBuilder
-
Returns the diameter used for creating nut spider elements
License requirements: None.
- nutSpiderScale() - Method in interface nxopen.cae.BoltBuilder
-
Returns the scale used to determine the nut spider diameter relative to the hole diameter
License requirements: None.
- nutSpiderType() - Method in interface nxopen.cae.BoltBuilder
-
Returns the option for nut spider diameter
License requirements: None.
- nutSurface() - Method in interface nxopen.cae.BoltBuilder
-
Returns the selected nut surface(s)
License requirements: None.
- nVariants - Variable in class nxopen.uf.UFUgmgr.AskVariantConfigurationsForDisplayData
-
- nVariants - Variable in class nxopen.uf.UFUgmgr.AskVariantConfigurationsForLoadData
-
- nVisible - Variable in class nxopen.uf.UFView.AskVisibleObjectsData
-
- NX - Static variable in class nxopen.cae.xyplot.Fonttype
-
NX Font
- NX - Static variable in class nxopen.drawings.ScaleValueFormatTypes
-
- NX - Static variable in class nxopen.facet.FacetedBodyCollection.Type
-
NX facet
- NX - Static variable in class nxopen.FontCollection.Type
-
NX font
- NX - Static variable in class nxopen.JtCreator.TessellationOption
-
nx level
- NX - Static variable in class nxopen.ListCreator.TessellationOption
-
nx level
- NX - Static variable in class nxopen.Step203Creator.ExternalReferenceOption
-
output external reference as NX file
- NX - Static variable in class nxopen.Step214Creator.ExternalReferenceOption
-
output external reference as NX file
- NX - Static variable in class nxopen.uf.UFUgfont.Type
-
- NX2D_FILE_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- NX2D_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- NX4GD - Static variable in class nxopen.pdm.ConfigurationContextBuilder.ConfigContextMode
-
- NX85 - Static variable in class nxopen.features.shipdesign.EdgeCutBuilder.VersionID
-
This feature builder is used to edit an existing NX85 - NX9 edge cut feature.
- NX901 - Static variable in class nxopen.features.shipdesign.EdgeCutBuilder.VersionID
-
This feature builder is used to create or edit an NX901 or beyond feature.
- NX902 - Static variable in class nxopen.features.shipdesign.ExcessMaterialBuilder.VersionID
-
This feature builder is used to create or edit an NX902 or beyond feature.
- NX_FONTS - Static variable in class nxopen.uf.UFCgm.Fonts
-
- NX_SHEET_METAL - Static variable in class nxopen.features.sheetmetal.ApplicationContext
-
Sheet Metal application context
- NX_WINDOW - Static variable in class nxopen.MovieSettingsBuilder.CaptureAreaChoices
-
Specifies that the NX window contents are to be recorded
- NxBcPlotContours - Interface in nxopen.cae
-
- NXColor - Interface in nxopen
-
Represents a standard NX color.
- NXColor.Rgb - Class in nxopen
-
RGB values
- nxColorValue() - Method in interface nxopen.routing.electrical.ElectricalStockDevice
-
Returns the NX color value.
- NXDRAWING - Static variable in class nxopen.drawings.MarkAsTemplateBuilder.ItemTypeEnum
-
- nxEquivalent() - Method in interface nxopen.routing.SingleDevice
-
Returns the NX equivalent object.
- NXException - Exception in nxopen
-
A base class for exceptions thrown by NXOpen methods
- NXFACET_BODY - Static variable in class nxopen.facet.ConvertFacetBodyBuilder.OutputTypes
-
Convert to NX Facet Bodies
- nxgateway() - Method in interface nxopen.preferences.SessionPreferences
-
Returns object for doing NXGateway preferences settings applicable to entire session .
- nxLabel() - Method in interface nxopen.ListCreator
-
Returns the m_nxlabel * - Specifies the label for Level of Detail using NX resolution
License requirements: None.
- NXLE - Static variable in class nxopen.FileNewApplication
-
Deprecated.
Specifies an NXLE template
- NXMATERIAL - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.MaterialType
-
Use NX material for LS-Dyna solver.
- nxmatrices() - Method in interface nxopen.BasePart
-
Returns the NXMatrixCollection instance belonging to this part .
- NXMatrix - Interface in nxopen
-
Represents an NX matrix.
- NXMatrixCollection - Interface in nxopen
-
Represents a collection of NX Matrixes.
- NXMessageBox - Interface in nxopen
-
Displays message box.
- nxmessageBox() - Method in interface nxopen.UI
-
the Uistyler for the current session.
- NXMessageBox.DialogType - Class in nxopen
-
Describes type of message box.
- NXObject - Interface in nxopen
-
A base class providing low-level services for most NXOpen classes.
- NXObject.AttributeInformation - Class in nxopen
-
Contains attribute information.
- NXObject.AttributeType - Class in nxopen
-
Specifies attribute type.
- NXObject.ComputationalTime - Class in nxopen
-
Holds the computational time value of a time attribute.
- NXObject.DateAndTimeFormat - Class in nxopen
-
Specifies the format of the date and time attribute.
- NXObjectList - Interface in nxopen
-
Represents a list of objects.
- nxobjects() - Method in interface nxopen.annotations.AssociatedObjectsBuilder
-
Returns the associated NX objects
License requirements: None.
- nxopen - package nxopen
-
Provides classes and interfaces for the NX Open Common API.
- nxopen.annotations - package nxopen.annotations
-
Provides classes and interfaces relating to Dimensions, Notes, Symbols, PMI, and other Annotations.
- nxopen.assemblies - package nxopen.assemblies
-
Provides classes and interfaces for Assemblies.
- nxopen.assemblies.productinterface - package nxopen.assemblies.productinterface
-
Provides classes and interfaces for Assembly Product Interfaces.
- nxopen.blockstyler - package nxopen.blockstyler
-
Provides classes and interfaces for the Block Styler.
- nxopen.bodydes - package nxopen.bodydes
-
Provides classes and interfaces for Body Design.
- nxopen.cae - package nxopen.cae
-
Provides classes and interfaces relating to Advanced Simulation and Design Simulation.
- nxopen.cae.ftk - package nxopen.cae.ftk
-
Provides classes and interfaces relating to Advanced Simulation and Design Simulation.
- nxopen.cae.modelcheck - package nxopen.cae.modelcheck
-
Provides classes and interfaces for Model Check.
- nxopen.cae.optimization - package nxopen.cae.optimization
-
Provides classes and interfaces relating to Optimization.
- nxopen.cae.responsesimulation - package nxopen.cae.responsesimulation
-
Provides classes and interfaces for Response Simulation.
- nxopen.cae.xyplot - package nxopen.cae.xyplot
-
Provides classes and interfaces for XY Graphing.
- nxopen.cam - package nxopen.cam
-
Provides classes and interfaces for Manufacturing.
- nxopen.cam.fbm - package nxopen.cam.fbm
-
Provides classes and interfaces for Manufacturing.
- nxopen.die - package nxopen.die
-
Provides classes and interfaces relating to Die Engineering and Die Design.
- nxopen.display - package nxopen.display
-
Provides classes and interfaces for display.
- nxopen.drafting - package nxopen.drafting
-
Provides classes and interfaces for the Drafting.
- nxopen.drawings - package nxopen.drawings
-
Provides classes and interfaces for Drafting Drawings.
- nxopen.facet - package nxopen.facet
-
Provides classes and interfaces for Faceted Representations.
- nxopen.features - package nxopen.features
-
Provides classes and interfaces for features.
- nxopen.features.sheetmetal - package nxopen.features.sheetmetal
-
Provides classes and interfaces for Sheet Metal Features.
- nxopen.features.shipdesign - package nxopen.features.shipdesign
-
Provides classes and interfaces for Ship Design.
- nxopen.features.subdivision - package nxopen.features.subdivision
-
Provides classes and interfaces for Manufacturing.
- nxopen.features.vehicledesign - package nxopen.features.vehicledesign
-
Provides classes and interfaces for the Vehicle Design.
- nxopen.fields - package nxopen.fields
-
Provides classes and interfaces for Fields.
- nxopen.formboard - package nxopen.formboard
-
Provides interfaces and classes to the Routing Electrical Formboard functionality.
- nxopen.gateway - package nxopen.gateway
-
Provides classes and interfaces for Gateway.
- nxopen.geometricanalysis - package nxopen.geometricanalysis
-
Provides classes and interfaces for Geometric Analysis.
- nxopen.geometricanalysis.sectionanalysis - package nxopen.geometricanalysis.sectionanalysis
-
Provides classes and interfaces for Section Analysis.
- nxopen.geometricutilities - package nxopen.geometricutilities
-
Provides classes and interfaces for Geometric Utilities.
- nxopen.issue - package nxopen.issue
-
Provides classes and interfaces for the Issue Management.
- nxopen.layer - package nxopen.layer
-
Provides classes and interfaces for layer.
- nxopen.layout2d - package nxopen.layout2d
-
Provides classes and interfaces for Manufacturing.
- nxopen.markup - package nxopen.markup
-
Provides classes and interfaces for Manufacturing.
- nxopen.mechatronics - package nxopen.mechatronics
-
Provides classes and interfaces for Mechatronics.
- nxopen.menubar - package nxopen.menubar
-
Provides classes and interfaces for the Menu Bar.
- nxopen.modldirect - package nxopen.modldirect
-
Provides classes and interfaces for Direct Modeling.
- nxopen.motion - package nxopen.motion
-
Provides classes and interfaces for Motion Simulation.
- nxopen.optimization - package nxopen.optimization
-
Provides classes and interfaces for Optimization.
- nxopen.options - package nxopen.options
-
Provides classes and interfaces for options.
- nxopen.partfamily - package nxopen.partfamily
-
Provides classes and interfaces for Manufacturing.
- nxopen.pdm - package nxopen.pdm
-
Provides classes and interfaces for PDM.
- nxopen.physmat - package nxopen.physmat
-
Provides classes and interfaces for Physical Material.
- nxopen.positioning - package nxopen.positioning
-
Provides classes and interfaces for Assembly Positioning and Constraints.
- nxopen.preferences - package nxopen.preferences
-
Provides classes and interfaces for preferences.
- nxopen.routing - package nxopen.routing
-
Provides classes and interfaces for Routing.
- nxopen.routing.electrical - package nxopen.routing.electrical
-
Provides classes and interfaces for Routing Electrical.
- nxopen.shapesearch - package nxopen.shapesearch
-
Provides classes and interfaces for Shape Search.
- nxopen.sheetmetal - package nxopen.sheetmetal
-
Provides classes and interfaces for Sheet Metal.
- nxopen.sim - package nxopen.sim
-
Provides classes and interfaces for Machine Tool Builder and CAM-Simulation.
- nxopen.tooling - package nxopen.tooling
-
Provides classes and interfaces for Tooling.
- nxopen.uf - package nxopen.uf
-
Provides classes and interfaces to the UF API.
- nxopen.uistyler - package nxopen.uistyler
-
PProvides classes and interfaces for User Interface (UI) Styler.
- nxopen.userdefinedobjects - package nxopen.userdefinedobjects
-
Provides classes and interfaces for User Defined Objects (UDOs).
- nxopen.userdefinedtemplate - package nxopen.userdefinedtemplate
-
Provides classes and interfaces for Manufacturing.
- nxopen.validate - package nxopen.validate
-
Provides classes and interfaces for Validation Utilities.
- nxopen.visualreporting - package nxopen.visualreporting
-
Provides classes and interfaces for Visual Reporting.
- nxopen.weld - package nxopen.weld
-
Provides classes and interfaces for Weld.
- NXPART - Static variable in class nxopen.drawings.MarkAsTemplateBuilder.ItemTypeEnum
-
- NXPART_FILE - Static variable in class nxopen.NXTo2dCreator.OutputAsOption
-
final output as nx part
- NXRemotableObject - Class in nxopen
-
A base class for all NXOpen remotable objects
- NXRemotableObject(NXRemotableObject.RemotingProtocol) - Constructor for class nxopen.NXRemotableObject
-
- NXRemotableObject.RemotingProtocol - Class in nxopen
-
Represents parameters used with RMI remoting.
- NXSHEETMETAL - Static variable in class nxopen.FileNewApplication
-
Deprecated.
Specifies a NX sheet metal file new template
- nxsm() - Method in interface nxopen.UFSession
-
- NXTo2dCreator - Interface in nxopen
-
- NXTo2dCreator.ExportDataOption - Class in nxopen
-
Export Data Option
- NXTo2dCreator.ExportFromOption - Class in nxopen
-
Export From Option
- NXTo2dCreator.OutputAsOption - Class in nxopen
-
Output As Option
- NXTo2dCreator.OutputToOption - Class in nxopen
-
Output To Option
- nxto2dSettingsFile() - Method in interface nxopen.NXTo2dCreator
-
Returns the nxto2d settings file - settings file to read default otions for nxto2d
License requirements: None.
- NXXSHELL_RESULTANT - Static variable in class nxopen.cae.Result.Quantity
-
- NXYSHELL_RESULTANT - Static variable in class nxopen.cae.Result.Quantity
-
- NYLON - Static variable in class nxopen.tooling.InitProjectBuilder.MaterialId
-
Nylon material type
- NYYSHELL_RESULTANT - Static variable in class nxopen.cae.Result.Quantity
-