public interface LineWeldData extends TransientObject
Modifier and Type | Method and Description |
---|---|
boolean |
allroundSymbol()
Returns the flag indicating whether the allround symbol is displayed
License requirements: None. |
boolean |
centerSymbol()
Returns the flag indicating whether the weld symbol is at center of
reference line, applicable only to spot and seam symbols
License requirements: None. |
boolean |
fieldWeld()
Returns the flag indicating whether the weld is done at the field site
License requirements: None. |
LineWeldSideData |
getArrowSideData()
Returns the arrow side data
License requirements: None. |
LineWeldSideData |
getOtherSideData()
Returns the other side data
License requirements: None. |
DisplayableObject[] |
getSideSeamObjects()
Returns the side seam objects.
|
String[] |
getTailSpecificationText()
Returns the tail specification text
License requirements: None. |
DisplayableObject[] |
getTopSeamObjects()
Returns the top seam objects.
|
IdentificationLineLocation |
identificationLineLocation()
Returns the identification line location
License requirements: None. |
void |
setAllroundSymbol(boolean allroundSymbol)
Sets the flag indicating whether the allround symbol is displayed
License requirements: None. |
void |
setArrowSideData(LineWeldSideData arrowSide)
Sets the arrow side data
License requirements: None. |
void |
setCenterSymbol(boolean centerSymbol)
Sets the flag indicating whether the weld symbol is at center of
reference line, applicable only to spot and seam symbols
License requirements: None. |
void |
setFieldWeld(boolean fieldWeld)
Sets the flag indicating whether the weld is done at the field site
License requirements: None. |
void |
setIdentificationLineLocation(IdentificationLineLocation location)
Sets the identification line location
License requirements: None. |
void |
setOtherSideData(LineWeldSideData otherSide)
Sets the other side data
License requirements: None. |
void |
setSideSeamDisplay(boolean sideSeam)
Sets the flag indicating whether the side seam is displayed
License requirements: None. |
void |
setSideSeamHorizontalFlip(boolean horizontalFlip)
Sets the flag indicating whether the side seam is flipped in the horizontal
direction
License requirements: None. |
void |
setSideSeamObjects(DisplayableObject[] objects)
Sets the side seam objects.
|
void |
setSideSeamVerticalFlip(boolean verticalFlip)
Sets the flag indicating whether the side seam is flipped in the vertical
direction
License requirements: None. |
void |
setSideSeamView(DraftingView sideSeamView)
Sets the view for which side seam is to be created.
|
void |
setStaggeredWeldSymbolDisplay(boolean staggeredDisplay)
Sets the flag indicating whether the staggered weld symbol is displayed
License requirements: None. |
void |
setSymbolScale(double symbolScale)
Sets the symbol scale
License requirements: None. |
void |
setTail(Tail tail)
Sets the tail for the reference line
License requirements: None. |
void |
setTailSpecificationText(String[] lines)
Sets the tail specification text
License requirements: None. |
void |
setTopSeamDisplay(boolean topSeamDisplay)
Sets the flag indicating whether the top seam is displayed
License requirements: None. |
void |
setTopSeamObjects(DisplayableObject[] objects)
Sets the top seam objects.
|
void |
setTopSeamReverse(boolean reverse)
Sets the flag indicating whether the top seam direction is reveresed
License requirements: None. |
void |
setTopSeamView(DraftingView topSeamView)
Sets the view for which top seam is to be created.
|
void |
setWeldStandard(WeldStandard standard)
License requirements: None. |
boolean |
sideSeamDisplay()
Returns the flag indicating whether the side seam is displayed
License requirements: None. |
boolean |
sideSeamHorizontalFlip()
Returns the flag indicating whether the side seam is flipped in the horizontal
direction
License requirements: None. |
boolean |
sideSeamVerticalFlip()
Returns the flag indicating whether the side seam is flipped in the vertical
direction
License requirements: None. |
DraftingView |
sideSeamView()
Returns the view for which side seam is to be created.
|
boolean |
staggeredWeldSymbolDisplay()
Returns the flag indicating whether the staggered weld symbol is displayed
License requirements: None. |
double |
symbolScale()
Returns the symbol scale
License requirements: None. |
Tail |
tail()
Returns the tail for the reference line
License requirements: None. |
boolean |
topSeamDisplay()
Returns the flag indicating whether the top seam is displayed
License requirements: None. |
boolean |
topSeamReverse()
Returns the flag indicating whether the top seam direction is reveresed
License requirements: None. |
DraftingView |
topSeamView()
Returns the view for which top seam is to be created.
|
WeldStandard |
weldStandard()
Returns the standard
License requirements: None. |
_value, dispose, printTestData, printTestData
WeldStandard weldStandard() throws NXException, RemoteException
NXException
RemoteException
void setWeldStandard(WeldStandard standard) throws NXException, RemoteException
standard
- New weld standardNXException
RemoteException
LineWeldSideData getArrowSideData() throws NXException, RemoteException
NXException
RemoteException
void setArrowSideData(LineWeldSideData arrowSide) throws NXException, RemoteException
arrowSide
- New arrow side line weld dataNXException
RemoteException
LineWeldSideData getOtherSideData() throws NXException, RemoteException
NXException
RemoteException
void setOtherSideData(LineWeldSideData otherSide) throws NXException, RemoteException
otherSide
- New other side line weld dataNXException
RemoteException
boolean centerSymbol() throws NXException, RemoteException
NXException
RemoteException
void setCenterSymbol(boolean centerSymbol) throws NXException, RemoteException
centerSymbol
- Flag indicating the weld symbol at the center of reference lineNXException
RemoteException
Tail tail() throws NXException, RemoteException
NXException
RemoteException
void setTail(Tail tail) throws NXException, RemoteException
tail
- New tail type for the reference lineNXException
RemoteException
String[] getTailSpecificationText() throws NXException, RemoteException
NXException
RemoteException
void setTailSpecificationText(String[] lines) throws NXException, RemoteException
lines
- List of linesNXException
RemoteException
boolean fieldWeld() throws NXException, RemoteException
NXException
RemoteException
void setFieldWeld(boolean fieldWeld) throws NXException, RemoteException
fieldWeld
- Flag indicating whether the weld is done at field siteNXException
RemoteException
boolean staggeredWeldSymbolDisplay() throws NXException, RemoteException
NXException
RemoteException
void setStaggeredWeldSymbolDisplay(boolean staggeredDisplay) throws NXException, RemoteException
staggeredDisplay
- Flag indicating whether the staggered symbol is displayedNXException
RemoteException
boolean topSeamDisplay() throws NXException, RemoteException
NXException
RemoteException
void setTopSeamDisplay(boolean topSeamDisplay) throws NXException, RemoteException
topSeamDisplay
- Flag indicating whether the top seam is displayedNXException
RemoteException
boolean topSeamReverse() throws NXException, RemoteException
NXException
RemoteException
void setTopSeamReverse(boolean reverse) throws NXException, RemoteException
reverse
- Flag indicating whether the top seam is reversedNXException
RemoteException
boolean sideSeamDisplay() throws NXException, RemoteException
NXException
RemoteException
void setSideSeamDisplay(boolean sideSeam) throws NXException, RemoteException
sideSeam
- Flag indicating whether the side seam is displayedNXException
RemoteException
boolean sideSeamVerticalFlip() throws NXException, RemoteException
NXException
RemoteException
void setSideSeamVerticalFlip(boolean verticalFlip) throws NXException, RemoteException
verticalFlip
- Flag indicating whether the side seam is vertically flippedNXException
RemoteException
boolean sideSeamHorizontalFlip() throws NXException, RemoteException
NXException
RemoteException
void setSideSeamHorizontalFlip(boolean horizontalFlip) throws NXException, RemoteException
horizontalFlip
- Flag indicating whether the side seam is horizontally flippedNXException
RemoteException
IdentificationLineLocation identificationLineLocation() throws NXException, RemoteException
NXException
RemoteException
void setIdentificationLineLocation(IdentificationLineLocation location) throws NXException, RemoteException
location
- Identification line locationNXException
RemoteException
double symbolScale() throws NXException, RemoteException
NXException
RemoteException
void setSymbolScale(double symbolScale) throws NXException, RemoteException
symbolScale
- New scaleNXException
RemoteException
boolean allroundSymbol() throws NXException, RemoteException
NXException
RemoteException
void setAllroundSymbol(boolean allroundSymbol) throws NXException, RemoteException
allroundSymbol
- Flag indicating whether to display all around symbolNXException
RemoteException
DraftingView topSeamView() throws NXException, RemoteException
NXException
RemoteException
void setTopSeamView(DraftingView topSeamView) throws NXException, RemoteException
topSeamView
- New view for which top seam is to be createdNXException
RemoteException
DisplayableObject[] getTopSeamObjects() throws NXException, RemoteException
NXException
RemoteException
void setTopSeamObjects(DisplayableObject[] objects) throws NXException, RemoteException
objects
- List of new top seam objectsNXException
RemoteException
DraftingView sideSeamView() throws NXException, RemoteException
NXException
RemoteException
void setSideSeamView(DraftingView sideSeamView) throws NXException, RemoteException
sideSeamView
- New view for which side seam is to be createdNXException
RemoteException
DisplayableObject[] getSideSeamObjects() throws NXException, RemoteException
NXException
RemoteException
void setSideSeamObjects(DisplayableObject[] objects) throws NXException, RemoteException
objects
- List of new side seam objectsNXException
RemoteException
Copyright 2011 Siemens Product Lifecycle Management Software Inc. All Rights Reserved.