nxopen.cam

Interface DmCmMultiplePassesCiBuilder

All Superinterfaces:

Remote, TaggedObject

public interface DmCmMultiplePassesCiBuilder
extends TaggedObject

Represents a DmCmMultiplePassesCiBuilder
To obtain an instance of this class use CAM.DmCmBuilder#dmCmMultiplePassesBuilder

Created in NX5.0.0

Nested Class Summary

Nested Classes

Modifier and Type	Interface and Description
static class	DmCmMultiplePassesCiBuilder.OrderType Available types for Order
static class	DmCmMultiplePassesCiBuilder.WallStepMethodType Available types for Wall Step Method

Method Summary

Modifier and Type	Method and Description
boolean	auxFloor() Returns the Use Auxiliary Floor License requirements: cam_base ("CAM BASE") .
boolean	cutOnlyAlongFloorAndWall() Returns the Cut Only Along Floor and Wall License requirements: cam_base ("CAM BASE") .
boolean	floor() Returns the Floor License requirements: cam_base ("CAM BASE") .
InheritableDoubleBuilder	floorIncrementBuilder() Returns the builder of Floor Increment License requirements: None.
InheritableIntBuilder	floorNumberPassesBuilder() Returns the builder of Floor Number of Passes License requirements: None.
NXObject	floorStepMethodBuilder() Returns the Floor Step Method Builder License requirements: cam_base ("CAM BASE") .
InheritableDoubleBuilder	floorStockOffsetBuilder() Returns the builder of Floor Stock Offset License requirements: None.
DmCmMultiplePassesCiBuilder.OrderType	order() Returns the Order License requirements: cam_base ("CAM BASE") .
void	setAuxFloor(boolean auxFloor) License requirements: cam_base ("CAM BASE") .
void	setCutOnlyAlongFloorAndWall(boolean cutAlongFloorWall) License requirements: cam_base ("CAM BASE") .
void	setFloor(boolean floor) License requirements: cam_base ("CAM BASE") .
void	setOrder(DmCmMultiplePassesCiBuilder.OrderType order) License requirements: cam_base ("CAM BASE") .
void	setWall(boolean wall) License requirements: cam_base ("CAM BASE") .
void	setWallStepMethod(DmCmMultiplePassesCiBuilder.WallStepMethodType wallStepMethod) License requirements: cam_base ("CAM BASE") .
boolean	wall() Returns the Wall License requirements: cam_base ("CAM BASE") .
InheritableDoubleBuilder	wallIncrementBuilder() Returns the builder of Wall Increment License requirements: None.
InheritableIntBuilder	wallNumberPassesBuilder() Returns the builder of Wall Number of Passes License requirements: None.
DmCmMultiplePassesCiBuilder.WallStepMethodType	wallStepMethod() Returns the Wall Step Method License requirements: cam_base ("CAM BASE") .
InheritableDoubleBuilder	wallStockOffsetBuilder() Returns the builder of Wall Stock Offset License requirements: None.

Methods inherited from interface nxopen.TaggedObject

printTestData, printTestData, tag, tagValue

Method Detail

wall

boolean wall()
      throws NXException,
             RemoteException

Returns the Wall
License requirements: cam_base ("CAM BASE")
.
Created in NX5.0.0

Returns:

the toggle value of Wall

Throws:

NXException

RemoteException

setWall

void setWall(boolean wall)
      throws NXException,
             RemoteException

License requirements: cam_base ("CAM BASE")
.
Created in NX5.0.0

Parameters:

wall - the toggle value of Wall

Throws:

NXException

RemoteException

wallStockOffsetBuilder

InheritableDoubleBuilder wallStockOffsetBuilder()
                                         throws NXException,
                                                RemoteException

Returns the builder of Wall Stock Offset
License requirements: None.

Created in NX5.0.0

Returns:

The Wall Stock Offset builder

Throws:

NXException

RemoteException

wallStepMethod

DmCmMultiplePassesCiBuilder.WallStepMethodType wallStepMethod()
                                                       throws NXException,
                                                              RemoteException

Returns the Wall Step Method
License requirements: cam_base ("CAM BASE")
.
Created in NX5.0.0

Returns:

the value of Wall Step Method

Throws:

NXException

RemoteException

setWallStepMethod

void setWallStepMethod(DmCmMultiplePassesCiBuilder.WallStepMethodType wallStepMethod)
                throws NXException,
                       RemoteException

License requirements: cam_base ("CAM BASE")
.
Created in NX5.0.0

Parameters:

wallStepMethod - the value of Wall Step Method

Throws:

NXException

RemoteException

wallIncrementBuilder

InheritableDoubleBuilder wallIncrementBuilder()
                                       throws NXException,
                                              RemoteException

Returns the builder of Wall Increment
License requirements: None.

Created in NX5.0.0

Returns:

The Wall Increment builder

Throws:

NXException

RemoteException

wallNumberPassesBuilder

InheritableIntBuilder wallNumberPassesBuilder()
                                       throws NXException,
                                              RemoteException

Returns the builder of Wall Number of Passes
License requirements: None.

Created in NX5.0.0

Returns:

The Wall Number of Passes builder

Throws:

NXException

RemoteException

floor

boolean floor()
       throws NXException,
              RemoteException

Returns the Floor
License requirements: cam_base ("CAM BASE")
.
Created in NX5.0.0

Returns:

the toggle value of floor

Throws:

NXException

RemoteException

setFloor

void setFloor(boolean floor)
       throws NXException,
              RemoteException

License requirements: cam_base ("CAM BASE")
.
Created in NX5.0.0

Parameters:

floor - the toggle value of floor

Throws:

NXException

RemoteException

auxFloor

boolean auxFloor()
          throws NXException,
                 RemoteException

Returns the Use Auxiliary Floor
License requirements: cam_base ("CAM BASE")
.
Created in NX5.0.0

Returns:

the toggle value of Use Auxiliary Floor

Throws:

NXException

RemoteException

setAuxFloor

void setAuxFloor(boolean auxFloor)
          throws NXException,
                 RemoteException

License requirements: cam_base ("CAM BASE")
.
Created in NX5.0.0

Parameters:

auxFloor - the toggle value of Use Auxiliary Floor

Throws:

NXException

RemoteException

floorStockOffsetBuilder

InheritableDoubleBuilder floorStockOffsetBuilder()
                                          throws NXException,
                                                 RemoteException

Returns the builder of Floor Stock Offset
License requirements: None.

Created in NX5.0.0

Returns:

The Floor Stock Offset builder

Throws:

NXException

RemoteException

floorStepMethodBuilder

NXObject floorStepMethodBuilder()
                         throws NXException,
                                RemoteException

Returns the Floor Step Method Builder
License requirements: cam_base ("CAM BASE")
.
Created in NX5.0.0

Returns:

the value of Floor Step Method Builder

Throws:

NXException

RemoteException

floorIncrementBuilder

InheritableDoubleBuilder floorIncrementBuilder()
                                        throws NXException,
                                               RemoteException

Returns the builder of Floor Increment
License requirements: None.

Created in NX5.0.0

Returns:

The Floor Increment builder

Throws:

NXException

RemoteException

floorNumberPassesBuilder

InheritableIntBuilder floorNumberPassesBuilder()
                                        throws NXException,
                                               RemoteException

Returns the builder of Floor Number of Passes
License requirements: None.

Created in NX5.0.0

Returns:

The Floor Number of Passes builder

Throws:

NXException

RemoteException

order

DmCmMultiplePassesCiBuilder.OrderType order()
                                     throws NXException,
                                            RemoteException

Returns the Order
License requirements: cam_base ("CAM BASE")
.
Created in NX5.0.0

Returns:

the value of Order

Throws:

NXException

RemoteException

setOrder

void setOrder(DmCmMultiplePassesCiBuilder.OrderType order)
       throws NXException,
              RemoteException

License requirements: cam_base ("CAM BASE")
.
Created in NX5.0.0

Parameters:

order - the value of Order

Throws:

NXException

RemoteException

cutOnlyAlongFloorAndWall

boolean cutOnlyAlongFloorAndWall()
                          throws NXException,
                                 RemoteException

Returns the Cut Only Along Floor and Wall
License requirements: cam_base ("CAM BASE")
.
Created in NX8.5.0

Returns:

the toggle value of Cut only along Floor and Wall

Throws:

NXException

RemoteException

setCutOnlyAlongFloorAndWall

void setCutOnlyAlongFloorAndWall(boolean cutAlongFloorWall)
                          throws NXException,
                                 RemoteException

License requirements: cam_base ("CAM BASE")
.
Created in NX8.5.0

Parameters:

cutAlongFloorWall - the toggle value of Cut only along Floor and Wall

Throws:

NXException

RemoteException