public interface PlugSlotBuilder
PlugSlot
builder WeldManager.createPlugSlotBuilder(nxopen.features.Feature)
Property | Value |
---|---|
AssignWeldPMI | 0 |
ContourDepth.Value | 2.54 (millimeters part), .1 (inches part) |
ContourHeight.Value | 2.54 (millimeters part), .1 (inches part) |
ContourType | None |
FieldWeld | 0 |
Modifier and Type | Interface and Description |
---|---|
static class |
PlugSlotBuilder.ArcProcessEnum
arc process for the weld feature
|
static class |
PlugSlotBuilder.EnumContour
contour type
|
Modifier and Type | Method and Description |
---|---|
boolean |
assignWeldPMI()
Returns the assign weld pmi
License requirements: None. |
CharacteristicsBuilder |
characteristics()
Returns the characteristics
License requirements: None. |
Expression |
contourDepth()
Returns the contour depth
License requirements: None. |
Expression |
contourHeight()
Returns the contour height needed for cap
License requirements: None. |
PlugSlotBuilder.EnumContour |
contourType()
Returns the contour type
License requirements: None. |
Section |
edge1()
Returns the edge of the hole or slot on face1
License requirements: None. |
ScCollector |
face1()
Returns the face1
License requirements: None. |
ScCollector |
face2()
Returns the face2
License requirements: None. |
boolean |
fieldWeld()
Returns the field weld
License requirements: None. |
Face |
seedFace1()
Returns the top face on face1
License requirements: None. |
Face |
seedFace2()
Returns the bottom face from which the weld will be extruded towards the top
License requirements: None. |
void |
setAssignWeldPMI(boolean assignWeldPMI)
License requirements: None. |
void |
setContourType(PlugSlotBuilder.EnumContour contourType)
License requirements: None. |
void |
setFieldWeld(boolean fieldWeld)
License requirements: None. |
void |
setSeedFace1(Face seedFace1)
License requirements: None. |
void |
setSeedFace2(Face seedFace2)
License requirements: None. |
ScCollector face1() throws NXException, RemoteException
NXException
RemoteException
ScCollector face2() throws NXException, RemoteException
NXException
RemoteException
Section edge1() throws NXException, RemoteException
NXException
RemoteException
PlugSlotBuilder.EnumContour contourType() throws NXException, RemoteException
NXException
RemoteException
void setContourType(PlugSlotBuilder.EnumContour contourType) throws NXException, RemoteException
contourType
- NXException
RemoteException
Expression contourHeight() throws NXException, RemoteException
NXException
RemoteException
Expression contourDepth() throws NXException, RemoteException
NXException
RemoteException
CharacteristicsBuilder characteristics() throws NXException, RemoteException
NXException
RemoteException
boolean assignWeldPMI() throws NXException, RemoteException
NXException
RemoteException
void setAssignWeldPMI(boolean assignWeldPMI) throws NXException, RemoteException
assignWeldPMI
- NXException
RemoteException
boolean fieldWeld() throws NXException, RemoteException
NXException
RemoteException
void setFieldWeld(boolean fieldWeld) throws NXException, RemoteException
fieldWeld
- NXException
RemoteException
Face seedFace1() throws NXException, RemoteException
NXException
RemoteException
void setSeedFace1(Face seedFace1) throws NXException, RemoteException
seedFace1
- NXException
RemoteException
Face seedFace2() throws NXException, RemoteException
NXException
RemoteException
void setSeedFace2(Face seedFace2) throws NXException, RemoteException
seedFace2
- NXException
RemoteException
Copyright 2011 Siemens Product Lifecycle Management Software Inc. All Rights Reserved.