- b() - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder
-
Returns the b
License requirements: None.
- b() - Method in interface nxopen.annotations.SurfaceFinishBuilder
-
Returns the b
License requirements: None.
- B - Static variable in class nxopen.cae.DurabilityDamageEvaluationBuilder.BwiWeldClassEnum
-
B
- B - Static variable in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.BwiWeldClassEnum
-
B
- B - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamPriDatum
-
B
- B - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamSecDatum
-
B
- B - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamTerDatum
-
B
- B - Static variable in class nxopen.cam.TurnToolBuilder.HolderStyles
-
B-Style
- b - Variable in class nxopen.NXColor.Rgb
-
blue value
- B - Static variable in class nxopen.tooling.AssemblyDrawingBuilder.AttributeValues
-
- B4 - Static variable in class nxopen.PrintBuilder.PaperSize
-
B4 sheet, 250- by 354-millimeters
- B4JIS_ROTATED - Static variable in class nxopen.PrintBuilder.PaperSize
-
B4 (JIS) rotated sheet, 364- by 257-millimeters: Windows 98/Me, Windows NT 4.0 and later
- B5 - Static variable in class nxopen.cam.TurnToolBuilder.ReliefAngleTypes
-
Relief angle type: B (5)
- B5 - Static variable in class nxopen.PrintBuilder.PaperSize
-
B5 sheet, 182- by 257-millimeter paper
- B5EXTRA - Static variable in class nxopen.PrintBuilder.PaperSize
-
B5 (ISO) Extra 201 x 276-millimeters
- B5JIS_ROTATED - Static variable in class nxopen.PrintBuilder.PaperSize
-
B5 (JIS) rotated sheet, 257- by 182-millimeters: Windows 98/Me, Windows NT 4.0 and later
- B6JIS - Static variable in class nxopen.PrintBuilder.PaperSize
-
B6 (JIS) sheet, 128- by 182-millimeters: Windows 98/Me, Windows NT 4.0 and later
- B6JIS_ROTATED - Static variable in class nxopen.PrintBuilder.PaperSize
-
B6 (JIS) rotated sheet, 182- by 128-millimeters: Windows 98/Me, Windows NT 4.0 and later
- BA - Static variable in class nxopen.cae.PreTestExportUnvBuilder.FileUnitsOption
-
BA: Foot (poundal)
- BACK - Static variable in class nxopen.cae.Post.AnimationControl
-
- BACK - Static variable in class nxopen.display.Stage.WallType
-
The back wall of the stage.
- BACK - Static variable in class nxopen.display.TrueShadingBuilder.SurfaceOrientType
-
Project shadows onto the back wall
- BACK - Static variable in class nxopen.drawings.View2dOrientBuilder.Type
-
back view
- BACK - Static variable in class nxopen.Selection.DialogResponse
-
User selected Back (if applicable)
- BACK - Static variable in class nxopen.Selection.Response
-
User selected Back
- BACK - Static variable in class nxopen.tooling.AssemblyDrawingBuilder.ModelViewToUseValue
-
- back(StylerEvent) - Method in interface nxopen.uistyler.DialogItem.Back
-
Called when a dialog user clicks Back <Shift>MB2 anywhere in NX or presses Back's keyboard accelerator
as defined in the resource file.
- BACK - Static variable in class nxopen.uistyler.DialogItem.DialogItemIndex
-
Back index
- BACK - Static variable in class nxopen.uistyler.DialogResponse
-
Back button was selected.
- BACK - Static variable in class nxopen.View.Canned
-
- BACK_INDEX - Static variable in class nxopen.uistyler.StylerEvent.Miscellaneous
-
Back index
- BACK_REASON - Static variable in class nxopen.uistyler.StylerEvent.Reason
-
BAck reason
- backAngle() - Method in interface nxopen.features.EmbossTaper
-
Returns the emboss back taper angle
the back angle expression
License requirements: None.
- backAngle() - Method in interface nxopen.features.vehicledesign.BaseDataDriverBuilder
-
Returns the inclination angle of the backrest.
- backAngle() - Method in interface nxopen.features.vehicledesign.ManikinBuilder
-
Returns the back angle
License requirements: None.
- backAngleA40() - Method in interface nxopen.HumanPosturePredictionBuilder
-
Returns the back angle A40 of seat data, it should be set for Class A driver, Class A front passenger
and Class A rear passenger
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- backAngleDbl() - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder
-
Returns the value of back angle
License requirements: None.
- backAngleDim() - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder
-
Returns the dimension expression for back angle
License requirements: None.
- backAngleExp() - Method in interface nxopen.features.vehicledesign.BaseDataPassengerBuilder
-
Returns the passenger's back angle.
- backAngleFixed() - Method in interface nxopen.features.vehicledesign.BaseDataDriverBuilder
-
Returns the option to indicate whether the Back Angle is fixed for not.
- backburnDistance() - Method in interface nxopen.cam.WedmIntGeomBuilder
-
Returns the Backburn Distance
License requirements: cam_base ("CAM BASE")
.
- backburnDistanceBuilder() - Method in interface nxopen.cam.WedmGeomBuilder
-
Returns the backburn_distance builder
License requirements: cam_base ("CAM BASE")
.
- backburnDistanceBuilder() - Method in interface nxopen.cam.WedmOperationBuilder
-
Returns the backburn_distance builder
License requirements: cam_base ("CAM BASE")
.
- backburnFlag() - Method in interface nxopen.cam.WedmGeomBuilder
-
Returns the Rough and Backburn Flag
License requirements: cam_base ("CAM BASE")
.
- backburnFlag() - Method in interface nxopen.cam.WedmIntGeomBuilder
-
Returns the Rough and Backburn Flag
License requirements: cam_base ("CAM BASE")
.
- backburnFlag() - Method in interface nxopen.cam.WedmOperationBuilder
-
Returns the Rough and Backburn Flag
License requirements: cam_base ("CAM BASE")
.
- backburnPasses() - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
Returns the Backburn Passes
License requirements: cam_base ("CAM BASE")
.
- backburnPasses() - Method in interface nxopen.cam.WedmGeomBuilder
-
Returns the Backburn Passes
License requirements: cam_base ("CAM BASE")
.
- backburnPasses() - Method in interface nxopen.cam.WedmOperationBuilder
-
Returns the Backburn Passes
License requirements: cam_base ("CAM BASE")
.
- backClip() - Method in interface nxopen.drawings.ViewStylePerspectiveBuilder
-
Returns the back clip toggle on the PERSPECTIVE tab of the View Style Dialog
License requirements: None.
- backClipDistance() - Method in interface nxopen.drawings.ViewStylePerspectiveBuilder
-
Returns the back clip distance data on the PERSPECTIVE tab of the View Style Dialog
License requirements: None.
- backClipping() - Method in interface nxopen.drawings.PerspectiveViewStyle
-
Returns the status of back clipping
License requirements: None.
- backClippingDistance() - Method in interface nxopen.display.CameraBuilder
-
Returns the back clipping distance
License requirements: None.
- backClippingDistance() - Method in interface nxopen.drawings.PerspectiveViewStyle
-
Returns the value of back clipping distance
License requirements: None.
- backDistance() - Method in interface nxopen.die.FlangeSteelRibChildBuilder
-
Returns the back distance of the Flange Steel Rib
License requirements: ug_die_design ("Die Design")
.
- backDistance() - Method in interface nxopen.die.FlangeSteelRibParentBuilder
-
Returns the back distance of the Flange Steel Ribs
License requirements: ug_die_design ("Die Design")
.
- backDraftAngle() - Method in interface nxopen.geometricutilities.MultiDraft
-
Returns the back draft angle.
- backEdgeOffset() - Method in interface nxopen.weld.EasyPatternBuilder
-
Returns the back edge offset.
- BACKGROUND - Static variable in class nxopen.blockstyler.Wizard.TaskNavigatorItem
-
- Background - Interface in nxopen.display
-
Represents a
Background
Background defines how background pixels are displayed.
- BACKGROUND - Static variable in class nxopen.display.ImageBasedLighting.ImagesType
-
Use the background image.
- BACKGROUND - Static variable in class nxopen.display.Reflection.Type
-
use the background for reflections
- background() - Method in interface nxopen.display.Scene
-
Returns the background - use to define how background pixels are displayed
License requirements: None.
- background() - Method in interface nxopen.drawings.SectionViewStyle
-
Returns the status of background.
- background() - Method in interface nxopen.drawings.ViewStyleSectionBuilder
-
Returns the background toggle on the SECTION tab of the View Style Dialog
License requirements: None.
- background() - Method in interface nxopen.preferences.SectionViewPreferences
-
Returns the status of background.
- Background.Type - Class in nxopen.display
-
background types
- BACKGROUND_IMAGE_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- BACKGROUND_IMAGE_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- backgroundColor() - Method in interface nxopen.cae.xyplot.BaseGridLayoutStyleSetting
-
Returns the background color
License requirements: None.
- backgroundColor - Variable in class nxopen.uf.UFDisp.DrawingDisplayData
-
- backgroundFaces() - Method in interface nxopen.drawings.SvtBuilder
-
Returns the background faces that are to be shown in the section view.
- backgroundOption() - Method in interface nxopen.preferences.SessionSketch
-
Returns the background option
License requirements: None.
- backgroundType() - Method in interface nxopen.display.Background
-
Returns the background type
License requirements: None.
- BACKING - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSymbolType
-
- BACKING - Static variable in class nxopen.annotations.Symbol
-
Specifies backing weld symbol (only one side of reference line )
- BACKING_INSERT - Static variable in class nxopen.tooling.PiercingInsertBuilder.DieInsertTypeItems
-
the backing insert type
- BACKING_PLATE - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSymbolType
-
- BACKING_PLATE - Static variable in class nxopen.annotations.Symbol
-
Specifies backing plate weld symbol (GB only)
- BACKING_STRIP_PERMANENT - Static variable in class nxopen.annotations.SupplementarySymbol
-
Specifies backing strip permanent supplementary weld symbol
- BACKING_STRIP_PERMANENT_ISO_AND_DIN_ONLY - Static variable in class nxopen.annotations.LineWeldDataBuilder.ContourSymbolType
-
- BACKING_STRIP_REMOVABLE - Static variable in class nxopen.annotations.SupplementarySymbol
-
Specifies backing strip removable supplementary weld symbol
- BACKING_STRIP_REMOVABLE_ISO_AND_DIN_ONLY - Static variable in class nxopen.annotations.LineWeldDataBuilder.ContourSymbolType
-
- backingFace() - Method in interface nxopen.weld.JointItemBuilder
-
Returns the backing face.
- backingFace() - Method in interface nxopen.weld.WeldJointBuilder
-
Returns the backing face.
- BackingPadBuilder - Interface in nxopen.tooling
-
- BackingPadBuilder.Types - Class in nxopen.tooling
-
types of backing pad design
- backliteWindshieldFace() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
Returns the backlite windshield face representing the rear window (backlite) day light opening (DLO).
- backoffAngle() - Method in interface nxopen.cam.BladeEdge
-
Returns the Angle
License requirements: None.
- backoffDistance() - Method in interface nxopen.cam.BladeEdge
-
Returns the Distance
License requirements: None.
- backReliefToggle() - Method in interface nxopen.die.SteelInsertBuilder
-
Returns the back relief toggle
License requirements: ug_die_design ("Die Design")
.
- backSideReliefDistance() - Method in interface nxopen.die.SteelInsertSectionBuilder
-
Returns the back/side relief distance of the steel insert casting
License requirements: ug_die_design ("Die Design")
.
- backView() - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
Returns the back view
License requirements: None.
- BACKWARD - Static variable in class nxopen.cam.DmRadBuilder.RadTraverseDirType
-
Reverse Boundary
- BACKWARD - Static variable in class nxopen.features.vehicledesign.BaseDataPassengerBuilder.SeatDirectionOptions
-
Seat position opposite to the driving direction
- backwardval - Variable in class nxopen.routing.SplinePathBuilder.ExtensionDataForPointAtIndexData
-
Backward Extension Length.
- BAD_ANGLE - Static variable in class nxopen.uf.UFConstants
-
- BAD_BSPLINE_DATA - Static variable in class nxopen.uf.UFConstants
-
- BAD_BSPLINE_WEIGHT - Static variable in class nxopen.uf.UFConstants
-
- BAD_CONNECTION - Static variable in class nxopen.uf.UFConstants
-
- BAD_CONTROL_1 - Static variable in class nxopen.uf.UFConstants
-
- BAD_CONTROL_2 - Static variable in class nxopen.uf.UFConstants
-
- BAD_CONTROL_3 - Static variable in class nxopen.uf.UFConstants
-
- BAD_CONTROL_4 - Static variable in class nxopen.uf.UFConstants
-
- BAD_CONTROL_5 - Static variable in class nxopen.uf.UFConstants
-
- BAD_CONTROL_6 - Static variable in class nxopen.uf.UFConstants
-
- BAD_CREATING_SNAPSHOT - Static variable in class nxopen.uf.UFConstants
-
- BAD_CROSS_CONNECTION - Static variable in class nxopen.uf.UFConstants
-
- BAD_CROSS_DIRECTION - Static variable in class nxopen.uf.UFConstants
-
- BAD_CROSS_ENTITY - Static variable in class nxopen.uf.UFConstants
-
- BAD_CROSS_ENTITY_TYPE - Static variable in class nxopen.uf.UFConstants
-
- BAD_CROSS_ITEM_COUNT - Static variable in class nxopen.uf.UFConstants
-
- BAD_CROSS_STRING_COUNT - Static variable in class nxopen.uf.UFConstants
-
- BAD_DATA - Static variable in class nxopen.uf.UFConstants
-
- BAD_DIRECTION - Static variable in class nxopen.uf.UFConstants
-
- BAD_FACE_PARAMETER - Static variable in class nxopen.uf.UFConstants
-
- BAD_GROUP - Static variable in class nxopen.uf.UFConstants
-
- BAD_GUIDE_CONNECTION - Static variable in class nxopen.uf.UFConstants
-
- BAD_GUIDE_DIRECTION - Static variable in class nxopen.uf.UFConstants
-
- BAD_GUIDE_ENTITY - Static variable in class nxopen.uf.UFConstants
-
- BAD_GUIDE_ENTITY_TYPE - Static variable in class nxopen.uf.UFConstants
-
- BAD_GUIDE_ITEM_COUNT - Static variable in class nxopen.uf.UFConstants
-
- BAD_GUIDE_STRING_COUNT - Static variable in class nxopen.uf.UFConstants
-
- BAD_ITEM_COUNT - Static variable in class nxopen.uf.UFConstants
-
- BAD_LAW_METHOD - Static variable in class nxopen.uf.UFConstants
-
- BAD_LAW_VALUE - Static variable in class nxopen.uf.UFConstants
-
- BAD_ORIENT_CONNECTION - Static variable in class nxopen.uf.UFConstants
-
- BAD_ORIENT_DIRECTION - Static variable in class nxopen.uf.UFConstants
-
- BAD_ORIENT_ENTITY - Static variable in class nxopen.uf.UFConstants
-
- BAD_ORIENT_ENTITY_TYPE - Static variable in class nxopen.uf.UFConstants
-
- BAD_ORIENT_ITEM_COUNT - Static variable in class nxopen.uf.UFConstants
-
- BAD_ORIENT_METHOD - Static variable in class nxopen.uf.UFConstants
-
- BAD_POINT_KEY - Static variable in class nxopen.uf.UFConstants
-
- BAD_POLY_STATUS - Static variable in class nxopen.uf.UFConstants
-
- BAD_PRIM_CONNECTION - Static variable in class nxopen.uf.UFConstants
-
- BAD_PRIM_DIRECTION - Static variable in class nxopen.uf.UFConstants
-
- BAD_PRIM_ENTITY - Static variable in class nxopen.uf.UFConstants
-
- BAD_PRIM_ENTITY_TYPE - Static variable in class nxopen.uf.UFConstants
-
- BAD_PRIM_ITEM_COUNT - Static variable in class nxopen.uf.UFConstants
-
- BAD_PRIM_STRING_COUNT - Static variable in class nxopen.uf.UFConstants
-
- BAD_PROJECT_DATA - Static variable in class nxopen.uf.UFConstants
-
- BAD_PROJECT_METHOD - Static variable in class nxopen.uf.UFConstants
-
- BAD_RHO_METHOD - Static variable in class nxopen.uf.UFConstants
-
- BAD_SCALE_BLENDED - Static variable in class nxopen.uf.UFConstants
-
- BAD_SCALE_CONNECTION - Static variable in class nxopen.uf.UFConstants
-
- BAD_SCALE_DIRECTION - Static variable in class nxopen.uf.UFConstants
-
- BAD_SCALE_ENTITY - Static variable in class nxopen.uf.UFConstants
-
- BAD_SCALE_ENTITY_TYPE - Static variable in class nxopen.uf.UFConstants
-
- BAD_SCALE_ITEM_COUNT - Static variable in class nxopen.uf.UFConstants
-
- BAD_SCALE_METHOD - Static variable in class nxopen.uf.UFConstants
-
- BAD_SECTION_CONNECTION - Static variable in class nxopen.uf.UFConstants
-
- BAD_SECTION_DIRECTION - Static variable in class nxopen.uf.UFConstants
-
- BAD_SECTION_ENTITY - Static variable in class nxopen.uf.UFConstants
-
- BAD_SECTION_ENTITY_TYPE - Static variable in class nxopen.uf.UFConstants
-
- BAD_SECTION_ITEM_COUNT - Static variable in class nxopen.uf.UFConstants
-
- BAD_SECTION_STRING_COUNT - Static variable in class nxopen.uf.UFConstants
-
- BAD_SPINE_CONNECTION - Static variable in class nxopen.uf.UFConstants
-
- BAD_SPINE_DIRECTION - Static variable in class nxopen.uf.UFConstants
-
- BAD_SPINE_ENTITY - Static variable in class nxopen.uf.UFConstants
-
- BAD_SPINE_ENTITY_TYPE - Static variable in class nxopen.uf.UFConstants
-
- BAD_SPINE_ITEM_COUNT - Static variable in class nxopen.uf.UFConstants
-
- BAD_SPINE_STRING_COUNT - Static variable in class nxopen.uf.UFConstants
-
- BAD_SPLINE_DATA - Static variable in class nxopen.uf.UFConstants
-
- BAD_TANGET_FACE_TAG_ONE - Static variable in class nxopen.uf.UFConstants
-
- BAD_TANGET_FACE_TAG_TWO - Static variable in class nxopen.uf.UFConstants
-
- BAD_TEMPLATE_CROSS - Static variable in class nxopen.uf.UFConstants
-
- BAD_TEMPLATE_CURVE - Static variable in class nxopen.uf.UFConstants
-
- BAD_TEMPLATE_PRIMARY - Static variable in class nxopen.uf.UFConstants
-
- badCoFins() - Method in interface nxopen.facet.CleanupFacetBodyBuilder
-
Returns the bad co fins option
License requirements: None.
- badVertexRings() - Method in interface nxopen.facet.CleanupFacetBodyBuilder
-
Returns the bad vertex rings option
License requirements: None.
- baf - Variable in class nxopen.uf.UFModl.BendOperationData
-
- baf - Variable in class nxopen.uf.UFModl.SmbendCornerData
-
- baf - Variable in class nxopen.uf.UFModl.SmbendCylinderData
-
- baf - Variable in class nxopen.uf.UFModl.SmbendData
-
- baf - Variable in class nxopen.uf.UFSmd.SeqOutput
-
- BAF_INVALID_OPTION - Static variable in class nxopen.uf.UFSmd.BafOptionsE
-
- BAF_NUM_ITEMS - Static variable in class nxopen.uf.UFSmd.BafOptionsE
-
- BAF_USE_EXPRESSION - Static variable in class nxopen.uf.UFSmd.BafOptionsE
-
- BAF_USE_SPRDSHEET - Static variable in class nxopen.uf.UFSmd.BafOptionsE
-
- BAF_USE_TCL - Static variable in class nxopen.uf.UFSmd.BafOptionsE
-
- BAFFLE - Static variable in class nxopen.tooling.CoolingDefineChannelBuilder.Types
-
- BAFFLE_LENGTH - Static variable in class nxopen.tooling.ChannelAdjustBuilder.AdjustType
-
Change the length of the baffles.
- bafOption - Variable in class nxopen.uf.UFSmd.GenPrefs
-
- BALANCE - Static variable in class nxopen.tooling.LayoutBuilder.LayoutSubType
-
Balance type
- balanceType() - Method in interface nxopen.features.HumanBuilder
-
Returns the balance type of active reach
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- balCavityNumber() - Method in interface nxopen.tooling.LayoutBuilder
-
Returns the balance cavity number
License requirements: None.
- BALL_END_SLOT - Static variable in class nxopen.uf.UFModl.SlotType
-
- BALL_FEATURE - Static variable in class nxopen.uf.UFGdt.FeatureType
-
- ballDia - Variable in class nxopen.uf.UFModl.AskBallSlotParmsData
-
- ballDia - Variable in class nxopen.uf.UFModlFeatures.AskBallGrooveParmsData
-
- BallJoint - Interface in nxopen.mechatronics
-
Represents the Ball Joint.
- BallJointBuilder - Interface in nxopen.mechatronics
-
- BallJointCollection - Interface in nxopen.mechatronics
-
Represents a collection of Ball Joint.
- ballJoints() - Method in interface nxopen.mechatronics.PhysicsManager
-
- BALLOON_NOTE - Static variable in class nxopen.annotations.PmiFilterByType.Type
-
Indicates a PMI balloon type
- BALLOON_NOTE_TYPE - Static variable in class nxopen.uf.UFPd.AttributeType
-
- BalloonNote - Interface in nxopen.annotations
-
Represents a Balloon Note
To create or edit an instance of this class, use
BalloonNoteBuilder
Created in NX6.0.0
- BalloonNoteBuilder - Interface in nxopen.annotations
-
- balloonText() - Method in interface nxopen.annotations.BalloonNoteBuilder
-
Returns the balloon text
License requirements: None.
- balloonTooltipImage() - Method in interface nxopen.blockstyler.AngularDimension
-
Returns the BalloonTooltipImage
License requirements: None.
- balloonTooltipImage() - Method in interface nxopen.blockstyler.BodyCollector
-
Returns the BalloonTooltipImage
License requirements: None.
- balloonTooltipImage() - Method in interface nxopen.blockstyler.Button
-
Returns the BalloonTooltipImage
License requirements: None.
- balloonTooltipImage() - Method in interface nxopen.blockstyler.CurveCollector
-
Returns the BalloonTooltipImage
License requirements: None.
- balloonTooltipImage() - Method in interface nxopen.blockstyler.DoubleBlock
-
Returns the BalloonTooltipImage
License requirements: None.
- balloonTooltipImage() - Method in interface nxopen.blockstyler.ExpressionBlock
-
Returns the BalloonTooltipImage
License requirements: None.
- balloonTooltipImage() - Method in interface nxopen.blockstyler.FaceCollector
-
Returns the BalloonTooltipImage
License requirements: None.
- balloonTooltipImage() - Method in interface nxopen.blockstyler.IntegerBlock
-
Returns the BalloonTooltipImage
License requirements: None.
- balloonTooltipImage() - Method in interface nxopen.blockstyler.Label
-
Returns the BalloonTooltipImage
License requirements: None.
- balloonTooltipImage() - Method in interface nxopen.blockstyler.LinearDimension
-
Returns the BalloonTooltipImage
License requirements: None.
- balloonTooltipImage() - Method in interface nxopen.blockstyler.ObjectColorPicker
-
Returns the BalloonTooltipImage
License requirements: None.
- balloonTooltipImage() - Method in interface nxopen.blockstyler.OnPathDimension
-
Returns the BalloonTooltipImage
License requirements: None.
- balloonTooltipImage() - Method in interface nxopen.blockstyler.RadiusDimension
-
Returns the BalloonTooltipImage
License requirements: None.
- balloonTooltipImage() - Method in interface nxopen.blockstyler.RGBColorPicker
-
Returns the BalloonTooltipImage
License requirements: None.
- balloonTooltipImage() - Method in interface nxopen.blockstyler.SectionBuilder
-
Returns the BalloonTooltipImage
License requirements: None.
- balloonTooltipImage() - Method in interface nxopen.blockstyler.SelectObject
-
Returns the BalloonTooltipImage
License requirements: None.
- balloonTooltipImage() - Method in interface nxopen.blockstyler.SpecifyCSYS
-
Returns the BalloonTooltipImage
License requirements: None.
- balloonTooltipImage() - Method in interface nxopen.blockstyler.SpecifyOrientation
-
Returns the BalloonTooltipImage
License requirements: None.
- balloonTooltipImage() - Method in interface nxopen.blockstyler.SpecifyPlane
-
Returns the BalloonTooltipImage
License requirements: None.
- balloonTooltipImage() - Method in interface nxopen.blockstyler.SpecifyPoint
-
Returns the BalloonTooltipImage
License requirements: None.
- balloonTooltipImage() - Method in interface nxopen.blockstyler.SpecifyVector
-
Returns the BalloonTooltipImage
License requirements: None.
- balloonTooltipImage() - Method in interface nxopen.blockstyler.SuperPoint
-
Returns the BalloonTooltipImage
License requirements: None.
- balloonTooltipImage() - Method in interface nxopen.blockstyler.SuperSection
-
Returns the BalloonTooltipImage
License requirements: None.
- balloonTooltipLayoutAsString() - Method in interface nxopen.blockstyler.AngularDimension
-
Returns the BalloonTooltipLayout as string
License requirements: None.
- balloonTooltipLayoutAsString() - Method in interface nxopen.blockstyler.BodyCollector
-
Returns the BalloonTooltipLayout as string
License requirements: None.
- balloonTooltipLayoutAsString() - Method in interface nxopen.blockstyler.Button
-
Returns the BalloonTooltipLayout as string
License requirements: None.
- balloonTooltipLayoutAsString() - Method in interface nxopen.blockstyler.CurveCollector
-
Returns the BalloonTooltipLayout as string
License requirements: None.
- balloonTooltipLayoutAsString() - Method in interface nxopen.blockstyler.DoubleBlock
-
Returns the BalloonTooltipLayout as string
License requirements: None.
- balloonTooltipLayoutAsString() - Method in interface nxopen.blockstyler.Enumeration
-
Returns the BalloonTooltipLayout as string
License requirements: None.
- balloonTooltipLayoutAsString() - Method in interface nxopen.blockstyler.ExpressionBlock
-
Returns the BalloonTooltipLayout as string
License requirements: None.
- balloonTooltipLayoutAsString() - Method in interface nxopen.blockstyler.FaceCollector
-
Returns the BalloonTooltipLayout as string
License requirements: None.
- balloonTooltipLayoutAsString() - Method in interface nxopen.blockstyler.IntegerBlock
-
Returns the BalloonTooltipLayout as string
License requirements: None.
- balloonTooltipLayoutAsString() - Method in interface nxopen.blockstyler.Label
-
Returns the BalloonTooltipLayout as string
License requirements: None.
- balloonTooltipLayoutAsString() - Method in interface nxopen.blockstyler.LinearDimension
-
Returns the BalloonTooltipLayout as string
License requirements: None.
- balloonTooltipLayoutAsString() - Method in interface nxopen.blockstyler.ObjectColorPicker
-
Returns the BalloonTooltipLayout as string
License requirements: None.
- balloonTooltipLayoutAsString() - Method in interface nxopen.blockstyler.OnPathDimension
-
Returns the BalloonTooltipLayout as string
License requirements: None.
- balloonTooltipLayoutAsString() - Method in interface nxopen.blockstyler.RadiusDimension
-
Returns the BalloonTooltipLayout as string
License requirements: None.
- balloonTooltipLayoutAsString() - Method in interface nxopen.blockstyler.RGBColorPicker
-
Returns the BalloonTooltipLayout as string
License requirements: None.
- balloonTooltipLayoutAsString() - Method in interface nxopen.blockstyler.SectionBuilder
-
Returns the BalloonTooltipLayout as string
License requirements: None.
- balloonTooltipLayoutAsString() - Method in interface nxopen.blockstyler.SelectObject
-
Returns the BalloonTooltipLayout as string
License requirements: None.
- balloonTooltipLayoutAsString() - Method in interface nxopen.blockstyler.SpecifyCSYS
-
Returns the BalloonTooltipLayout as string
License requirements: None.
- balloonTooltipLayoutAsString() - Method in interface nxopen.blockstyler.SpecifyOrientation
-
Returns the BalloonTooltipLayout as string
License requirements: None.
- balloonTooltipLayoutAsString() - Method in interface nxopen.blockstyler.SpecifyPlane
-
Returns the BalloonTooltipLayout as string
License requirements: None.
- balloonTooltipLayoutAsString() - Method in interface nxopen.blockstyler.SpecifyPoint
-
Returns the BalloonTooltipLayout as string
License requirements: None.
- balloonTooltipLayoutAsString() - Method in interface nxopen.blockstyler.SpecifyVector
-
Returns the BalloonTooltipLayout as string
License requirements: None.
- balloonTooltipLayoutAsString() - Method in interface nxopen.blockstyler.StringBlock
-
Returns the BalloonTooltipLayout as string
License requirements: None.
- balloonTooltipLayoutAsString() - Method in interface nxopen.blockstyler.SuperPoint
-
Returns the BalloonTooltipLayout as string
License requirements: None.
- balloonTooltipLayoutAsString() - Method in interface nxopen.blockstyler.SuperSection
-
Returns the BalloonTooltipLayout as string
License requirements: None.
- balloonTooltipLayoutAsString() - Method in interface nxopen.blockstyler.Toggle
-
Returns the BalloonTooltipLayout as string
License requirements: None.
- balloonTooltipOffImage() - Method in interface nxopen.blockstyler.Toggle
-
Returns the BalloonTooltipOffImage
License requirements: None.
- balloonTooltipOffText() - Method in interface nxopen.blockstyler.Toggle
-
Returns the BalloonTooltipOffText
License requirements: None.
- balloonTooltipOnImage() - Method in interface nxopen.blockstyler.Toggle
-
Returns the BalloonTooltipOnImage
License requirements: None.
- balloonTooltipOnText() - Method in interface nxopen.blockstyler.Toggle
-
Returns the BalloonTooltipOnText
License requirements: None.
- balloonTooltipText() - Method in interface nxopen.blockstyler.AngularDimension
-
Returns the BalloonTooltipText
License requirements: None.
- balloonTooltipText() - Method in interface nxopen.blockstyler.BodyCollector
-
Returns the BalloonTooltipText
License requirements: None.
- balloonTooltipText() - Method in interface nxopen.blockstyler.Button
-
Returns the BalloonTooltipText
License requirements: None.
- balloonTooltipText() - Method in interface nxopen.blockstyler.CurveCollector
-
Returns the BalloonTooltipText
License requirements: None.
- balloonTooltipText() - Method in interface nxopen.blockstyler.DoubleBlock
-
Returns the BalloonTooltipText
License requirements: None.
- balloonTooltipText() - Method in interface nxopen.blockstyler.ExpressionBlock
-
Returns the BalloonTooltipText
License requirements: None.
- balloonTooltipText() - Method in interface nxopen.blockstyler.FaceCollector
-
Returns the BalloonTooltipText
License requirements: None.
- balloonTooltipText() - Method in interface nxopen.blockstyler.IntegerBlock
-
Returns the BalloonTooltipText
License requirements: None.
- balloonTooltipText() - Method in interface nxopen.blockstyler.Label
-
Returns the BalloonTooltipText
License requirements: None.
- balloonTooltipText() - Method in interface nxopen.blockstyler.LinearDimension
-
Returns the BalloonTooltipText
License requirements: None.
- balloonTooltipText() - Method in interface nxopen.blockstyler.ObjectColorPicker
-
Returns the BalloonTooltipText
License requirements: None.
- balloonTooltipText() - Method in interface nxopen.blockstyler.OnPathDimension
-
Returns the BalloonTooltipText
License requirements: None.
- balloonTooltipText() - Method in interface nxopen.blockstyler.RadiusDimension
-
Returns the BalloonTooltipText
License requirements: None.
- balloonTooltipText() - Method in interface nxopen.blockstyler.RGBColorPicker
-
Returns the BalloonTooltipText
License requirements: None.
- balloonTooltipText() - Method in interface nxopen.blockstyler.SectionBuilder
-
Returns the BalloonTooltipText
License requirements: None.
- balloonTooltipText() - Method in interface nxopen.blockstyler.SelectObject
-
Returns the BalloonTooltipText
License requirements: None.
- balloonTooltipText() - Method in interface nxopen.blockstyler.SpecifyCSYS
-
Returns the BalloonTooltipText
License requirements: None.
- balloonTooltipText() - Method in interface nxopen.blockstyler.SpecifyOrientation
-
Returns the BalloonTooltipText
License requirements: None.
- balloonTooltipText() - Method in interface nxopen.blockstyler.SpecifyPlane
-
Returns the BalloonTooltipText
License requirements: None.
- balloonTooltipText() - Method in interface nxopen.blockstyler.SpecifyPoint
-
Returns the BalloonTooltipText
License requirements: None.
- balloonTooltipText() - Method in interface nxopen.blockstyler.SpecifyVector
-
Returns the BalloonTooltipText
License requirements: None.
- balloonTooltipText() - Method in interface nxopen.blockstyler.SuperPoint
-
Returns the BalloonTooltipText
License requirements: None.
- balloonTooltipText() - Method in interface nxopen.blockstyler.SuperSection
-
Returns the BalloonTooltipText
License requirements: None.
- ballRadius() - Method in interface nxopen.motion.JointFrictionAdams
-
- ballRadius() - Method in interface nxopen.motion.JointFrictionLms
-
Returns the ball radius
License requirements: None.
- ballRadius() - Method in interface nxopen.motion.JointFrictionRecurDyn
-
- ballRadiusExpression() - Method in interface nxopen.motion.JointFrictionAdams
-
Returns the ball radius expression
License requirements: None.
- ballRadiusExpression() - Method in interface nxopen.motion.JointFrictionRecurDyn
-
Returns the ball radius expression
License requirements: None.
- BALTIC - Static variable in class nxopen.features.TextBuilder.ScriptOptions
-
Specifies the Baltic (Northeastern European) character set
- BAND - Static variable in class nxopen.cam.ParamBuilder.OptimizationTypes
-
band
- BANDED - Static variable in class nxopen.motion.LmsSolverProperty.DynamicAccelerationMethods
-
- BANDED_CONTOURS - Static variable in class nxopen.cae.Post.Style
-
- bannerMessage() - Method in interface nxopen.PlotBuilder
-
Returns the banner message.
- BannerOptions() - Constructor for class nxopen.uf.UFPlot.BannerOptions
-
- BannerOptions(boolean, String) - Constructor for class nxopen.uf.UFPlot.BannerOptions
-
- BAR - Static variable in class nxopen.cae.xyplot.GraphStyle
-
Option to display plot in bar style
- BAR - Static variable in class nxopen.cam.BoundaryTurnBlank.Type
-
- BAR - Static variable in class nxopen.uf.UFSf.ElementType
-
- BarColorOption - Class in nxopen.cae.xyplot
-
Represents the bar filling color option
- barPosition - Variable in class nxopen.uf.UFDrf.GetTextBarsData
-
- BARREL - Static variable in class nxopen.cam.Tool.Types
-
Milling tool-Barrel
- BarrelToolBuilder - Interface in nxopen.cam
-
Represents a BarrelTool Builder
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createBarrelToolBuilder
Created in NX5.0.0
- BarStyle2DSetting - Interface in nxopen.cae.xyplot
-
Represents the 2d bar display style.
- BarStyle3DSetting - Interface in nxopen.cae.xyplot
-
Represents the 3d bar display style.
- barType - Variable in class nxopen.uf.UFDrf.GetTextBarsData
-
- BASE - Static variable in class nxopen.display.CgfxMattexBuilder.Technique
-
Deprecated.
place holder for variable technique list
- BASE - Static variable in class nxopen.drawings.StandardViewsBuilder.View
-
base views
- BASE - Static variable in class nxopen.Expression.UnitsOption
-
Return expression value in base part units.
- BASE - Static variable in class nxopen.features.sheetmetal.SheetmetalManagerTabType
-
base tab
- base() - Method in interface nxopen.mechatronics.PhysicsJointBuilder
-
Returns the base of joint.
- base64ToBytes(String, int, int) - Method in interface nxopen.uf.UFClone
-
- Base64ToBytesData() - Constructor for class nxopen.uf.UFClone.Base64ToBytesData
-
- BASE_CONVENTIONAL - Static variable in class nxopen.die.FlangeTaskBuilder.CamTypes
-
Base Mounted Cam - Conventional Fill
- BASE_DATA - Static variable in class nxopen.features.vehicledesign.CloseRangeVisibilityBuilder.PositionPaths
-
Base data
- BASE_DATA - Static variable in class nxopen.features.vehicledesign.CrashBarrierBuilder.PositionObjectType
-
- BASE_DIAMETER_HEIGHT_AND_HALF_ANGLE - Static variable in class nxopen.features.ConeBuilder.Types
-
Represents type of cone created by providing Base Diameter, Height and Half Angle
- BASE_FACE - Static variable in class nxopen.annotations.HoleTableSettingsFormatBuilder.DepthMeasurementDatumType
-
- BASE_FEM - Static variable in class nxopen.cae.FEModelOccAttribute.RepType
-
No alternate rep.
- BASE_FLANGE - Static variable in class nxopen.die.FillAreaBuilder.Types
-
Fill area is in the base flange area.
- BASE_LINE - Static variable in class nxopen.annotations.AssociativityLineOption
-
Base line
- BASE_LINE - Static variable in class nxopen.features.shipdesign.InverseBendingLinesBuilder.NeutralMethodType
-
Base line.
- BASE_LINE_TYPE - Static variable in class nxopen.uf.UFDrf.ObjectAssocLineType
-
- BASE_MEMBER_SUBTYPE - Static variable in class nxopen.uf.UFView.Subtype
-
- BASE_MOUNTED - Static variable in class nxopen.die.PierceTaskBuilder.CamTypes
-
Base Mounted Cam
- BASE_MOUNTED - Static variable in class nxopen.die.TrimTaskBuilder.CamTypes
-
Base Mounted Cam
- BASE_MOUNTED_CAM - Static variable in class nxopen.tooling.DieEngTrimTaskBuilder.TrimTaskCamType
-
- BASE_OF_NECK - Static variable in class nxopen.HumanData.JointType
-
Indicate joint named base_of_neck
- BASE_UV - Static variable in class nxopen.cam.ToolAxisVariable.RulingTypes
-
Base UV
- BASE_VIEW_COMMAND - Static variable in class nxopen.drawings.GeneralWorkFlowBuilder.ModelBasedAlwaysStartType
-
- BASE_VIEW_TOOL - Static variable in class nxopen.tooling.AssemblyDrawingBuilder.ViewOptionValue
-
- baseAngleTolerance() - Method in interface nxopen.motion.BodyContactLms
-
Returns the base angle tolerance
License requirements: None.
- BaseAngularDimension - Interface in nxopen.annotations
-
Represents an angular dimension
Abstract class
.
- BaseAngularDimensionBuilder - Interface in nxopen.annotations
-
Represents a
AngularDimension
builder
This is an abstract class and cannot be instantiated.
- baseArc() - Method in interface nxopen.features.ConeBuilder
-
Returns the base arc
License requirements: None.
- BaseArcLengthDimension - Interface in nxopen.annotations
-
Represents a arc length dimension
Abstract class
.
- BaseArrow - Interface in nxopen.annotations
-
Represents a BaseArrow
There is no KF creator for this class.
- baseAttributes() - Method in interface nxopen.die.DieShoeBuilder
-
Returns the base attributes
License requirements: None.
- baseAxis - Variable in class nxopen.uf.UFCurve.SectionRadialData
-
- BaseBarStyleSetting - Interface in nxopen.cae.xyplot
-
Represents the base bar display style.
- baseBody() - Method in interface nxopen.tooling.BendOperationBuilder
-
Returns the base body.
- baseBody() - Method in interface nxopen.tooling.DirectUnbendBuilder
-
Returns the base body.
- BaseBuilder - Interface in nxopen.cae.responsesimulation
-
Represents the abstract builder class for all objects defined in response analysis meta solution
This is an abstract class, and cannot be created.
- BaseCenterline3d - Interface in nxopen.annotations
-
Represents a Base 3D centerline
This is an abstract class.
- BaseCenterline3dBuilder - Interface in nxopen.annotations
-
Represents a Base Centerline3d Builder for pmi and drafting 3D centerlines
This is an abstract class, and cannot be instantiated.
- BaseCenterMark - Interface in nxopen.annotations
-
Represents a base center mark class
This is an abstract class.
- BaseCenterMarkBuilder - Interface in nxopen.annotations
-
Represents a Base CenterMark Builder for Pmi and Drafting centermark
This is an abstract class, and cannot be instantiated.
- BaseCflangeData() - Constructor for class nxopen.uf.UFNxsm.BaseCflangeData
-
- BaseCflangeData(Tag, String, UFNxsm.FeaturePropertyConstants, String, UFNxsm.FeaturePropertyConstants, UFNxsm.FeaturePropertyConstants, UFNxsm.FeaturePropertyConstants, UFNxsm.MitreCflangeData, UFNxsm.BendOption, boolean) - Constructor for class nxopen.uf.UFNxsm.BaseCflangeData
-
- BaseChamferDimension - Interface in nxopen.annotations
-
Represents a chamfer dimension
Abstract class
.
- BaseChamferDimensionBuilder - Interface in nxopen.annotations
-
- BaseConcentricCircleDimension - Interface in nxopen.annotations
-
Represents a concentric circle dimension
Abstract class
.
- baseCornerCut() - Method in interface nxopen.features.shipdesign.SplitStandardPartBuilder
-
Returns the corner cut at the base point on the standard part.
- baseCurve() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the base curve
License requirements: None.
- BaseCurveLengthDimensionBuilder - Interface in nxopen.annotations
-
- baseCurveRebuildData() - Method in interface nxopen.features.StyledCornerBuilder
-
Returns the base curve rebuild data
License requirements: None.
- baseCurves() - Method in interface nxopen.features.SilhouetteFlangeBuilder
-
Returns the base curves.
- BaseCustomSymbol - Interface in nxopen.annotations
-
Represents a base custom symbol
This is an abstract class and cannot be directly instantiated
.
- BaseCustomSymbolBuilder - Interface in nxopen.annotations
-
Represents a base Builder for Drafting and PMI Custom Symbol
This is an abstract class, and cannot be instantiated.
- BaseCustomSymbolBuilder.AnnotationPreferences - Class in nxopen.annotations
-
Enum for Annotation Preferences This is used by nxopen.annotations.BaseCustomSymbolBuilder#annotationPreferences
and nxopen.annotations.BaseCustomSymbolBuilder#setAnnotationPreferences
to set the annotation preferences for a symbol
- BaseCustomSymbolBuilder.GeometryPreferences - Class in nxopen.annotations
-
Enum for Geometric Preferences This is used by nxopen.annotations.BaseCustomSymbolBuilder#geometryPreferences
and nxopen.annotations.BaseCustomSymbolBuilder#setGeometryPreferences
to set the geometric preferences for a symbol
- BaseCylindricalDimension - Interface in nxopen.annotations
-
Represents a cylindrical dimension
Abstract class
.
- BASED_ON_EDGE_NODE_MOVEMENT - Static variable in class nxopen.cae.ManualMorphBuilder.MapMethod
-
- BASED_ON_NBR_MOVEMENT - Static variable in class nxopen.cae.AutomaticMorphBuilder.OrphanNodeMovementType
-
Based on adjacent nodes movement.
- BASED_ON_UNITS - Static variable in class nxopen.annotations.ZeroToleranceDisplayStyle
-
Zero tolerance display is tied to display units
- BaseDataBuilder - Interface in nxopen.features.vehicledesign
-
- BaseDataDriverBuilder - Interface in nxopen.features.vehicledesign
-
- BaseDataLoadingBuilder - Interface in nxopen.features.vehicledesign
-
- BaseDataLoadingBuilder.LoadingType - Class in nxopen.features.vehicledesign
-
This enum represents the vehicle loading types.
- BaseDataLoadingWheelBuilder - Interface in nxopen.features.vehicledesign
-
- BaseDataLoadingWheelBuilder.DataDefinitionOptions - Class in nxopen.features.vehicledesign
-
This enum represents the options to define the wheel position.
- BaseDataPassengerBuilder - Interface in nxopen.features.vehicledesign
-
- BaseDataPassengerBuilder.SeatDirectionOptions - Class in nxopen.features.vehicledesign
-
This enum represents the options to define the passenger's seat direction type.
- BaseDataWheelBuilder - Interface in nxopen.features.vehicledesign
-
- BaseDataWheelBuilder.PositionDefinitionOptions - Class in nxopen.features.vehicledesign
-
This enum represents the options to define the wheel position.
- BaseDatum - Interface in nxopen.annotations
-
Represents a datum
This is an abstract class, and cannot be created.
- BaseDatumTarget - Interface in nxopen.annotations
-
Represents a datum target
This is an abstract class, and cannot be created.
- baseDiameter() - Method in interface nxopen.features.ConeBuilder
-
Returns the base diameter
License requirements: None.
- baseDiameter - Variable in class nxopen.uf.UFModlFeatures.AskConeParmsData
-
- BaseDiameterDimension - Interface in nxopen.annotations
-
Represents a diameter dimension
Abstract class
.
- baseDim() - Method in interface nxopen.features.vehicledesign.VisionPlaneBuilder
-
Returns the base dim; dimension from left to right.
- baseDisplay() - Method in interface nxopen.PartCollection
-
Returns the current display part of the session.
- baseDistanceTolerance() - Method in interface nxopen.motion.BodyContactLms
-
Returns the base distance tolerance
License requirements: None.
- baseEdge - Variable in class nxopen.uf.UFModl.SmbendCornerData
-
- baseEdge - Variable in class nxopen.uf.UFModl.SmjoggleData
-
- baseEdges() - Method in interface nxopen.features.sheetmetal.AeroFlangeBuilder
-
Returns the base edge section object for the flange.
- BaseEditSettingsBuilder - Interface in nxopen.drafting
-
- baseEnableMaxFacetSize() - Method in interface nxopen.motion.BodyContactLms
-
Returns the base enable max facet size
License requirements: None.
- baseEnd() - Method in interface nxopen.MeasureAngleBuilder
-
Returns the end point
License requirements: solid_modeling ("SOLIDS MODELING")
.
- BaseExplicitOrderBuilder - Interface in nxopen.gateway
-
- baseFace() - Method in interface nxopen.features.sheetmetal.AeroUnformBuilder
-
Returns the Base Face for the UNFORM.
- baseFace() - Method in interface nxopen.features.sheetmetal.ConvertToSheetmetalBuilder
-
Returns the base face from which the thickness of the part is determined.
- baseFace - Variable in class nxopen.uf.UFModl.SmbendCylinderData
-
- baseFace - Variable in class nxopen.uf.UFModl.SmbendData
-
- baseFace - Variable in class nxopen.uf.UFModl.SmjoggleData
-
- baseFace - Variable in class nxopen.uf.UFModl.SmreliefData
-
- baseFaces() - Method in interface nxopen.features.SilhouetteFlangeBuilder
-
Returns the base faces.
- baseFaces() - Method in interface nxopen.features.StyledCornerBuilder
-
Returns the base faces
License requirements: None.
- baseFaces - Variable in class nxopen.uf.UFModl.StycornerData
-
- baseFactor() - Method in interface nxopen.features.SilhouetteFlangeBuilder
-
Returns the base pipe continuity factor.
- BaseFcf - Interface in nxopen.annotations
-
Represents a datum
This is an abstract class, and cannot be created.
- BaseFeatureCollection - Interface in nxopen.features
-
This class contains methods for creating builders for features that are owned by a
BasePart
that is not necessarily a
Part
.
- baseFeatures() - Method in interface nxopen.BasePart
-
Returns the FeatureCollection instance belonging to this part .
- BaseFEModel - Interface in nxopen.cae
-
This class represents an Assembly Finite Element Model.
- baseFEModel() - Method in interface nxopen.cae.BaseFemPart
-
Returns the femodel
BaseFEModel
associated with the part
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX6.0.0
- BaseFemPart - Interface in nxopen.cae
-
Represents an NX part of type .afm.
- BaseFemPart.AxisymAbstractionType - Class in nxopen.cae
-
Used to specify the axisymmetric abstraction type during Fempart creation .
- BaseFemPart.SolverAndAnalysisTypeData - Class in nxopen.cae
-
- baseFlange() - Method in interface nxopen.die.KeywayBuilder
-
Returns the closed loop section representing the base flange
License requirements: None.
- baseFlangeSection() - Method in interface nxopen.die.DieShoeBuilder
-
Returns the base flange section
License requirements: None.
- BaseFoldedRadiusDimension - Interface in nxopen.annotations
-
Represents a folded radius dimension
Abstract class
.
- BaseFrameBar - Interface in nxopen.annotations
-
Represents a base frame bar class
This is an abstract class and cannot be directly instantiated
.
- BaseFrameBarBuilder - Interface in nxopen.annotations
-
- BaseFrameBarBuilder.AxisType - Class in nxopen.annotations
-
- BaseGridLayoutStyleSetting - Interface in nxopen.cae.xyplot
-
Represents the base grid layout display style.
- BaseHalfSectionLine - Interface in nxopen.drawings
-
Represents a Base Half Section Line.
- baseHeight - Variable in class nxopen.uf.UFUgfont.FontHeader
-
- BaseHoleDimension - Interface in nxopen.annotations
-
Represents a hole dimension
Abstract class
.
- BaseHorizontalDimension - Interface in nxopen.annotations
-
Represents a horizontal dimension
Abstract class
.
- BaseIteration - Interface in nxopen.cae
-
This class provides interfaces to query iteration attributes
An instance of this class can not be obtained
.
- BaseIteration.IterationType - Class in nxopen.cae
-
The Analysis type of a iteration object
- BaseIteration.IterationValueType - Class in nxopen.cae
-
The type of value that is stored in a iteration object
- baseline() - Method in interface nxopen.annotations.BaseFrameBarBuilder
-
Returns the baseline
License requirements: None.
- baseline() - Method in interface nxopen.annotations.BaseOrdinateDimensionBuilder
-
Returns the baseline
License requirements: None.
- BASELINE - Static variable in class nxopen.annotations.DimensionSetBuilder.DimensionSetMethod
-
Part of a baseline
- BASELINE - Static variable in class nxopen.annotations.DimensionType
-
Baseline dimension
- BASELINE - Static variable in class nxopen.annotations.FrameBarElements
-
- BASELINE - Static variable in class nxopen.annotations.SearchCriteriaDimensionBuilder.DimensionTypes
-
Baseline
- baseline() - Method in interface nxopen.features.shipdesign.MainDimensionsBuilder
-
Returns the expression containing the position value of baseline along the Z axis.
- baseLine() - Method in interface nxopen.features.shipdesign.QualifySketchBuilder
-
Returns the selected base line.
- baseLine() - Method in interface nxopen.geometricutilities.LawBuilder
-
Returns the base line.
- BASELINE_CENTER - Static variable in class nxopen.display.TransientText.StandardTextRef
-
Display the text with the given position
in the horizontal center of the text box
at the baseline
- BASELINE_CENTER - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.StandardTextRef
-
Display the text with the given position
in the horizontal center of the text box
at the baseline
- BASELINE_END - Static variable in class nxopen.display.TransientText.StandardTextRef
-
Display the text starting on the baseline,
at the right end of the text box
for left-to-right text,
or at the left end of the text box
for right-to-left text
- BASELINE_END - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.StandardTextRef
-
Display the text starting on the baseline,
at the right end of the text box
for left-to-right text,
or at the left end of the text box
for right-to-left text
- BASELINE_START - Static variable in class nxopen.display.TransientText.StandardTextRef
-
Display the text starting on the
baseline, at the left end of the
text box for left-to-right text,
or at the right end of the text box
for right-to-left text
- BASELINE_START - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.StandardTextRef
-
Display the text starting on the
baseline, at the left end of the
text box for left-to-right text,
or at the right end of the text box
for right-to-left text
- BaseLinearDimensionBuilder - Interface in nxopen.annotations
-
Represents a
Dimension
builder
This is an abstract class and cannot be instantiated.
- BaselineDimension - Interface in nxopen.annotations
-
Represents a baseline dimension.
- baselineForComparison() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
Returns the baseline for comparison
License requirements: None.
- baselineLabelColor() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the label color
License requirements: None.
- baselineLabelFont() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the label font
License requirements: None.
- baselineLabelItalicized() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the label italicized
License requirements: None.
- baselineLabelWidth() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the label width
License requirements: None.
- baselineOffset() - Method in interface nxopen.annotations.DimensionPreferences
-
Returns the offset between dimension lines of baseline dimensions
License requirements: None.
- baselineOffset() - Method in interface nxopen.annotations.DimensionStyleBuilder
-
Returns the offset between dimension lines of baseline dimensions
License requirements: None.
- baselineOffset - Variable in class nxopen.uf.UFDrf.DimensionPreferences
-
- baselineOffset - Variable in class nxopen.uf.UFDrf.DimensionPreferences1
-
- baselineStyle() - Method in interface nxopen.annotations.FrameBarStyleBuilder
-
Returns the style baseline
License requirements: None.
- BaseLineStyleSetting - Interface in nxopen.cae.xyplot
-
Represents the base line display style.
- baselineTicColor() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the tic color
License requirements: None.
- baselineTicDisplay() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the baseline tic display type
License requirements: None.
- baselineTicFont() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the tic font
License requirements: None.
- baselineTicLength() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the tic length
License requirements: None.
- baselineTicWidth() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the tic width
License requirements: None.
- baselineVector() - Method in interface nxopen.annotations.OrdinateBaselineBuilder
-
Returns the baseline vector
License requirements: None.
- BaseLoadcase - Interface in nxopen.cae
-
This class provides interfaces to query loadcase attributes
An instance of this class can not be obtained
.
- baseMaxFacetSize() - Method in interface nxopen.motion.BodyContactLms
-
Returns the base max facet size
License requirements: None.
- baseMethod - Variable in class nxopen.uf.UFUi.PointConstructData
-
- BaseNote - Interface in nxopen.annotations
-
Represents a Note
This is an abstract class and cannot be directly instantiated
.
- baseObject - Variable in class nxopen.uf.UFFam.AttributeData
-
- baseOffset() - Method in interface nxopen.die.HeelpostBuilder
-
Returns the offset to apply to the given base before building the heelpost
License requirements: None.
- baseOffset() - Method in interface nxopen.die.MachineReliefBuilder
-
Returns the expression containing the offset value to apply to the base definition before trimming the base of the tool solids.
- BaseOrdinateDimensionBuilder - Interface in nxopen.annotations
-
Represents a
OrdinateDimension
builder
This is an abstract class and cannot be instantiated.
- BaseOrdinateDimensionBuilder.Types - Class in nxopen.annotations
-
the type of dimension being created
- baseOrientation() - Method in interface nxopen.die.CastReliefBuilder
-
Returns the base orientation of the die casting used for orienting the relief construction
License requirements: None.
- baseOrientation() - Method in interface nxopen.die.DieShoeBuilder
-
Returns the base orientation
License requirements: None.
- baseOrientation() - Method in interface nxopen.die.DrawBeadBuilder
-
Returns the orientation used to construct the sections representing the bead shape.
- baseOrientation() - Method in interface nxopen.die.DrawDiePunchBuilder
-
Returns the base orientation of the draw die punch casting.
- baseOrientation() - Method in interface nxopen.die.FillAreaBuilder
-
Returns the plane defining the base of the target solid.
- baseOrientation() - Method in interface nxopen.die.FingerClearanceNotchBuilder
-
Returns the plane defining the base of the target solid.
- baseOrientation() - Method in interface nxopen.die.HandlingCoreBuilder
-
Returns the base plane of the target.
- baseOrientation() - Method in interface nxopen.die.HeelpostBuilder
-
Returns the base of the heelpost
License requirements: None.
- baseOrientation() - Method in interface nxopen.die.KeywayBuilder
-
Returns the bottom orientation plane of the keyway pad
License requirements: None.
- baseOrientation() - Method in interface nxopen.die.MachineReliefBuilder
-
Returns the base orientation of the target solid.
- baseOrientation() - Method in interface nxopen.die.SteelInsertBuilder
-
Returns the base orientation of the steelinsert
License requirements: ug_die_design ("Die Design")
.
- basePanelFaces() - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder
-
Returns the Base Panel face selection
License requirements: solid_modeling ("SOLIDS MODELING")
.
- basePanelInnerContactCurves() - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder
-
Returns the Base Panel inner contact section
License requirements: solid_modeling ("SOLIDS MODELING")
.
- basePanelOuterContactCurves() - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder
-
Returns the Base Panel outer contact section
License requirements: solid_modeling ("SOLIDS MODELING")
.
- basePanelType() - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder
-
Returns the Base Panel type
License requirements: solid_modeling ("SOLIDS MODELING")
.
- BaseParallelDimension - Interface in nxopen.annotations
-
Represents a parallel dimension
Abstract class
.
- BasePart - Interface in nxopen
-
Base class for an NX part.
- BasePart.BookmarkOption - Class in nxopen
-
Controls the information written to a bookmark file.
- BasePart.CloseAfterSave - Class in nxopen
-
Used to specify whether a part should be closed after it is saved.
- BasePart.CloseModified - Class in nxopen
-
Indicates how part close should handle component parts when they are modified
- BasePart.CloseWholeTree - Class in nxopen
-
Used to specify whether or not to close a part's components during a close operation.
- BasePart.CollaborativeContentType - Class in nxopen
-
Represents the collaborative content type corresponding to this part
- BasePart.HistoryEventInformation - Class in nxopen
-
Contains part history event information
- BasePart.IncompleteStatus - Class in nxopen
-
Incomplete part return data
- BasePart.PartPreview - Class in nxopen
-
Specifies the preview mode of the part file.
- BasePart.PreviewImageData - Class in nxopen
-
- BasePart.ReopenData - Class in nxopen
-
- BasePart.SaveComponents - Class in nxopen
-
Used to specify whether a part's components should be saved (if modified)
when the part is saved.
- BasePart.TransientStatus - Class in nxopen
-
Transient part return data
- BasePart.Units - Class in nxopen
-
The units of the part file.
- BasePerpendicularDimension - Interface in nxopen.annotations
-
Represents a perpendicular dimension
Abstract class
.
- basePipeContinuity() - Method in interface nxopen.features.SilhouetteFlangeBuilder
-
Returns the base pipe continuity.
- basePlane() - Method in interface nxopen.die.ClampingSlotBuilder
-
Returns the base plane of the clamping slot pad
License requirements: None.
- basePlane() - Method in interface nxopen.display.PlanarShipGridBuilder
-
Returns the base plane where the planar ship grid is created.
- basePlane() - Method in interface nxopen.features.SectionCurveBuilder
-
Returns the base plane
License requirements: None.
- basePlane() - Method in interface nxopen.features.shipdesign.ExpansionDrawingBuilder
-
Returns the base plane
License requirements: None.
- basePlane() - Method in interface nxopen.features.shipdesign.ShellExpansionBuilder
-
Returns the base plane
License requirements: None.
- basePlane() - Method in interface nxopen.tooling.DieDesDrawDieBuilder
-
Returns the base plane, which is used for define the base of the die.
- basePlane() - Method in interface nxopen.tooling.DieDesDrawPunchBuilder
-
Returns the base plane, which is used for define the base of the punch.
- basePlane() - Method in interface nxopen.tooling.DieDesignLowerBinderBuilder
-
Returns the base plane used to create Lower Binder
License requirements: ug_die_design ("Die Design")
.
- basePlane() - Method in interface nxopen.tooling.DieDesignTrimPostBuilder
-
Returns the base plane used to create Trim Post
License requirements: ug_die_design ("Die Design")
.
- basePlane - Variable in class nxopen.uf.UFCurve.SectionParallelData
-
- BasePlateStyleSetting - Interface in nxopen.cae.xyplot
-
Represents the base plate display style.
- BasePlotParameters - Interface in nxopen.cae.xyplot
-
Represents the parameters passed to create or modify a plot.
- basePoint() - Method in interface nxopen.MeasureAngleBuilder
-
Returns the base point
License requirements: solid_modeling ("SOLIDS MODELING")
.
- basePoint() - Method in interface nxopen.mechatronics.LinearLimitJointBuilder
-
Returns the base point.
- basePoint() - Method in interface nxopen.mechatronics.LinearSpringJointBuilder
-
Returns the base point.
- basepoint - Variable in class nxopen.routing.SplinePathBuilder.OffsetData
-
The base point frim the offset object.
- basePoint - Variable in class nxopen.routing.StockOffsetPointBuilder.PointData
-
Base point for stock offset points, null for
Routing.StockOffsetPointBuilder.PointType#NORMAL
points.
- basePoint() - Method in interface nxopen.tooling.BlankLayoutBuilder
-
Returns the base point.
- basePoint - Variable in class nxopen.uf.UFCurve.AskOffsetDirection2Data
-
- basePoint - Variable in class nxopen.uf.UFCurve.AskOffsetDirectionData
-
- basePoint - Variable in class nxopen.uf.UFCurve.SectionRadialData
-
- basePoint - Variable in class nxopen.uf.UFDraw.BreakoutData
-
- basePoint1 - Variable in class nxopen.assemblies.DegreesOfFreedom
-
First rotation base point.
- basePoint1Status - Variable in class nxopen.assemblies.DegreesOfFreedom
-
First rotation base point status.
- basePoint2 - Variable in class nxopen.assemblies.DegreesOfFreedom
-
Second rotation base point.
- basePoint2Status - Variable in class nxopen.assemblies.DegreesOfFreedom
-
Second rotation base point status.
- basePointChoice() - Method in interface nxopen.display.ImageBaseBuilder
-
Returns the image reference base point choice.
- BasePointToPointSectionLine - Interface in nxopen.drawings
-
Represents a Base Point to Point Section Line.
- baseProfile() - Method in interface nxopen.features.LawExtensionBuilder
-
Returns the base profile
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING")
.
- baseProfile() - Method in interface nxopen.features.LawExtensionBuilderEx
-
Returns the base profile
License requirements: None.
- basePt - Variable in class nxopen.uf.UFUi.PointConstructData
-
- basePt1 - Variable in class nxopen.uf.UFDrf.ObjectAssocData
-
- basePt2 - Variable in class nxopen.uf.UFDrf.ObjectAssocData
-
- BaseRadialDimensionBuilder - Interface in nxopen.annotations
-
Represents a
Dimension
builder
This is an abstract class and cannot be instantiated.
- baseRadius() - Method in interface nxopen.die.QuickBinderBuilder
-
Returns the base radius for a cone.
- BaseRadiusDimension - Interface in nxopen.annotations
-
Represents a radius dimension
Abstract class
.
- baseRadiusLaw() - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
Returns the base radius law variable
License requirements: None.
- BaseRapidDimensionBuilder - Interface in nxopen.annotations
-
Represents a
Dimension
builder
This is an abstract class and cannot be instantiated.
- BaseRecord - Interface in nxopen.cae.ftk
-
Manages the base record.
- BaseResultType - Interface in nxopen.cae
-
This class provides interfaces to query result type attributes
An instance of this class can not be obtained
.
- BaseResultType.AskComponentsData - Class in nxopen.cae
-
- BaseSession - Interface in nxopen
-
A base class for NXOpen session classes
- BaseSession.LibraryUnloadOption - Class in nxopen
-
Describes when an automation program should be unloaded from a running session.
- baseSheetSelection() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the base face selection
License requirements: None.
- BaseSteppedSectionLine - Interface in nxopen.drawings
-
Represents a Base Stepped Section Line.
- baseString() - Method in interface nxopen.InterpartExpressionsBuilder
-
Returns the base string.
- baseString - Variable in class nxopen.uf.UFClone.NameRuleDef
-
- baseSurface() - Method in interface nxopen.features.OvercrownBuilder
-
Returns the Base Surface when the Global Shaping Operator control is by
Function.
- BaseSurfaceFinish - Interface in nxopen.annotations
-
Represents a Base Surface Finish
This is an abstract class, and cannot be instantiated.
- BaseSurfaceFinishBuilder - Interface in nxopen.annotations
-
Represents a
BaseSurfaceFinish
builder
This is an abstract class, and cannot be instantiated.
- BaseSurfaceFinishBuilder.ParanthesesType - Class in nxopen.annotations
-
- BaseSurfaceFinishBuilder.ParenthesesType - Class in nxopen.annotations
-
the valid parentheses types
- BaseSurfaceFinishBuilder.ToleranceOption - Class in nxopen.annotations
-
the valid surface finish tolerance types
- BaseSymbolBuilder - Interface in nxopen.annotations
-
Represents a Base Symbol Builder
This is an abstract class, and cannot be instantiated.
- BaseSymbolStyleSetting - Interface in nxopen.cae.xyplot
-
Represents the base symbol display style.
- BaseTemplate - Interface in nxopen.cae.xyplot
-
Manages the display style
Not support KF.
- BaseTemplateManager - Interface in nxopen.cae.xyplot
-
Manages the graph template
Not support KF.
- baseThickness() - Method in interface nxopen.die.DrawDiePunchSectionBuilder
-
Returns the base thickness of the draw die punch casting.
- baseThickness() - Method in interface nxopen.tooling.DieDesDrawDieBuilder
-
Returns the base thickness, which is used for define the base thickness of the die.
- baseThickness() - Method in interface nxopen.tooling.DieDesDrawPunchBuilder
-
Returns the base thickness, which is used for define the base thickness of the die.
- BaseThicknessDimensionBuilder - Interface in nxopen.annotations
-
- BaseTitleBlockBuilder - Interface in nxopen.annotations
-
- BaseUnit - Interface in nxopen.cae.ftk
-
Manages the base unit
Not support KF.
- baseVector() - Method in interface nxopen.mechatronics.AngularLimitJointBuilder
-
Returns the base vector.
- baseVector() - Method in interface nxopen.mechatronics.AngularSpringJointBuilder
-
Returns the base vector.
- BaseVerticalDimension - Interface in nxopen.annotations
-
Represents a horizontal dimension
Abstract class
.
- BaseView - Interface in nxopen.drawings
-
Represents a Base View.
- baseView() - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
Returns the base view
License requirements: None.
- baseView() - Method in interface nxopen.drawings.ViewStyle
-
Returns object for doing View style settings applicable to Basedata .
- baseView() - Method in interface nxopen.preferences.ViewPreferences
-
Returns object for doing View style settings applicable to BaseView .
- BaseViewBuilder - Interface in nxopen.drawings
-
- BaseViewPreferences - Interface in nxopen.preferences
-
Represents set of Base View Preferences applicable to drafting views.
- BaseViewStyle - Interface in nxopen.drawings
-
Represents set of Base View Style Preferences applicable to drafting views.
- baseWidth() - Method in interface nxopen.die.DrawDiePunchSectionBuilder
-
Returns the base width of the draw die punch casting.
- baseWidth() - Method in interface nxopen.tooling.DieDesDrawPunchBuilder
-
Returns the base width, which is used for define the base width value of the die.
- baseWork() - Method in interface nxopen.PartCollection
-
Returns the current work part of the session.
- BASIC - Static variable in class nxopen.annotations.DraftingSurfaceFinishBuilder.FinishType
-
Basic
- BASIC - Static variable in class nxopen.annotations.SearchCriteriaDimensionBuilder.ToleranceTypes
-
Basic
- BASIC - Static variable in class nxopen.annotations.SurfaceFinishBuilder.FinishType
-
Basic
- BASIC - Static variable in class nxopen.annotations.ToleranceType
-
|xxx|
- BASIC - Static variable in class nxopen.die.AddendumSectionBuilder.SectionShapeType
-
Section consists of all segments in a step like shape.
- BASIC - Static variable in class nxopen.features.SilhouetteFlangeBuilder.Types
-
Basic Silhouette Flange
- BASIC - Static variable in class nxopen.sim.KinematicComponentBuilder.SystemClass
-
On available in a BASIC machine.
- BASIC_DESIGN - Static variable in class nxopen.features.shipdesign.StiffenerBySupportPathBuilder.Scenario
-
Basic Design Scenario
- BASIC_DIM_NOT_TO_SCALE_TOL - Static variable in class nxopen.uf.UFDrf.ToleranceType
-
- BASIC_DIMENSION_NOT_TO_SCALE - Static variable in class nxopen.annotations.SearchCriteriaDimensionBuilder.ToleranceTypes
-
BasicDimensionNotToScale
- BASIC_NOT_TO_SCALE - Static variable in class nxopen.annotations.ToleranceType
-
- BASIC_TOL - Static variable in class nxopen.uf.UFDrf.ToleranceType
-
- basicColor() - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
Returns the basic color
License requirements: None.
- basicCurves - Variable in class nxopen.FollowFilletRule.Data
-
Non-associative basic curves that are used to create this rule
- BasicEffectivityBuilder - Interface in nxopen
-
Represent an interface class for basic effectivity block to assign or edit discrete effectivity unit values.
- BasicModel - Interface in nxopen.cae.xyplot
-
Represents a abstract component object on a XY graphing.
- BAT_ANGLE_BEND - Static variable in class nxopen.uf.UFSmd.BatAngleTypeE
-
- BAT_ANGLE_INCLUDED - Static variable in class nxopen.uf.UFSmd.BatAngleTypeE
-
- BAT_ANGLE_INVALID_OPTION - Static variable in class nxopen.uf.UFSmd.BatAngleTypeE
-
- BAT_ANGLE_NUM_ITEMS - Static variable in class nxopen.uf.UFSmd.BatAngleTypeE
-
- BAT_RADIUS_INSIDE - Static variable in class nxopen.uf.UFSmd.BatRadiusTypeE
-
- BAT_RADIUS_INVALID_OPTION - Static variable in class nxopen.uf.UFSmd.BatRadiusTypeE
-
- BAT_RADIUS_NUM_ITEMS - Static variable in class nxopen.uf.UFSmd.BatRadiusTypeE
-
- BAT_RADIUS_OUTSIDE - Static variable in class nxopen.uf.UFSmd.BatRadiusTypeE
-
- batAngleType - Variable in class nxopen.uf.UFSmd.GenPrefs
-
- BATCH - Static variable in class nxopen.routing.DesignRuleViolationCollection.Mode
-
Executes design rules in a batch process
- BATCH - Static variable in class nxopen.routing.DesignRuleViolationCollection.Reason
-
- batchShade(String, int, int, UFDisp.ShadeMethod) - Method in interface nxopen.uf.UFDisp
-
- batchShadeOptions(String, int, int, UFDisp.ShadeMethod, UFDisp.ShadeOptions) - Method in interface nxopen.uf.UFDisp
-
- batRadiusType - Variable in class nxopen.uf.UFSmd.GenPrefs
-
- baxis() - Method in interface nxopen.cam.AlongMachineAxisMoveBuilder
-
Returns the B position
License requirements: None.
- BAXIS - Static variable in class nxopen.uf.UFPath.Axis
-
- BBOX - Static variable in class nxopen.tooling.ReliefDesignBuilder.Method
-
Boundbox method
- bboxPoint() - Method in interface nxopen.cae.CfdLocalResolutionConstraintBuilder
-
Returns the bbox point
License requirements: None.
- bc() - Method in interface nxopen.cae.SimBCBuilder
-
Returns the CAE.SimBC
object
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX4.0.0
- bcBaseName() - Method in interface nxopen.cae.AutoBCBuilder
-
Returns the base name of
SimBC
objects created
License requirements: None.
- bcLabel() - Method in interface nxopen.cae.SimBCBuilder
-
Returns the label of CAE.SimBC
object
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX7.5.0
- Bcmmcp() - Constructor for class nxopen.uf.UFCurve.Bcmmcp
-
- Bcmmcp(double, double, double, double, double, double, double[], double[], double[], double[], int, int) - Constructor for class nxopen.uf.UFCurve.Bcmmcp
-
- bcName() - Method in interface nxopen.cae.SimBCBuilder
-
Returns the name of CAE.SimBC
object
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX4.0.0
- BCSelectionDisplayBuilder - Interface in nxopen.cae
-
This class provides BC Selection Visual Display support, use this class to get the
BC types in currrent solution, adds special BCs to list, and display the BC's selection
geometry with the BC's color to do visually check
To create a new instance of this class, use
SimSimulation.createBcSelectionDisplayBuilder()
Default values.
- bcSequenceDisplay(NXObject[]) - Method in interface nxopen.cae.SimSimulation
-
Updates the specified BCs persistent display color according to the sequence colors defined in
customer default setting.
- BCURVE_DEGREE_SLOPE_MISMATCH - Static variable in class nxopen.uf.UFConstants
-
- BCURVE_INVALID_EXTENSION - Static variable in class nxopen.uf.UFConstants
-
- BCURVE_INVALID_POINT - Static variable in class nxopen.uf.UFConstants
-
- BCURVE_INVALID_SLOPE - Static variable in class nxopen.uf.UFConstants
-
- bcurveTol() - Method in interface nxopen.IgesCreator
-
Returns the bcurve tol - tolerance for creating b-spline curves
License requirements: None.
- BDD - Static variable in class nxopen.cae.SimConditionSeqMgr.FileFormat
-
- BDF - Static variable in class nxopen.cae.optimization.TBSSmoothBuilder.Format
-
Represents surfaces in .bdf file
- Bead - Interface in nxopen.features
-
Represents a Bead feature
To create or edit an instance of this class, use
BeadBuilder
Created in NX5.0.0
- BEAD - Static variable in class nxopen.uf.UFConstants
-
- BEAD - Static variable in class nxopen.weld.WeldAdvisorCheckerType
-
sealer bead
- BEAD - Static variable in class nxopen.weld.WeldObjectBuilder.CommandName
-
Bead command
- BEAD_ATTACHED - Static variable in class nxopen.uf.UFModl.BeadAttach
-
- BEAD_HOLLOW - Static variable in class nxopen.uf.UFModl.BeadHollow
-
- BEAD_NA_TYPE - Static variable in class nxopen.uf.UFWeld.Types
-
- BEAD_NON_ASSOCIATIVE - Static variable in class nxopen.uf.UFConstants
-
- BEAD_NOT_ATTACHED - Static variable in class nxopen.uf.UFModl.BeadAttach
-
- BEAD_NOT_HOLLOW - Static variable in class nxopen.uf.UFModl.BeadHollow
-
- BEAD_TYPE - Static variable in class nxopen.uf.UFWeld.Types
-
- BEAD_WELD - Static variable in class nxopen.uf.UFConstants
-
- BEAD_WELD_NON_ASSOCIATIVE - Static variable in class nxopen.uf.UFConstants
-
- BeadBuilder - Interface in nxopen.features.sheetmetal
-
Represents a Bead feature builder.
- BeadBuilder.CrossSectionTypeOptions - Class in nxopen.features.sheetmetal
-
This enum represents the cross section type options for the Bead.
- BeadBuilder.EndTypeOptions - Class in nxopen.features.sheetmetal
-
This enum represents the end type options for the Bead.
- BeadBuilder.HeightSideOptions - Class in nxopen.features.sheetmetal
-
This enum represents the depth direction for the Bead.
- beadLocation() - Method in interface nxopen.weld.WeldBeadBuilder
-
Returns the desired bead location.
- BEAM - Static variable in class nxopen.cae.ElementCreateBuilder.ElemDimType
-
beam
- BEAM - Static variable in class nxopen.cae.ElementExtrudeBuilder.ElemDimType
-
beam
- BEAM - Static variable in class nxopen.cae.ElementProjectBuilder.ElementDimensionType
-
beam element
- BEAM - Static variable in class nxopen.cae.ElementReflectBuilder.ElemDimType
-
only beam
- BEAM - Static variable in class nxopen.cae.ElementRevolveBuilder.ElemDimType
-
beam
- BEAM - Static variable in class nxopen.cae.ElementTranslateBuilder.ElemDimensionType
-
only beam elements can be selected
- BEAM - Static variable in class nxopen.cae.ElementTypeBuilder.ElementType
-
beam
- BEAM - Static variable in class nxopen.cae.MeshCollectorBuilder.ElementDimensionOption
-
1-d
- BEAM - Static variable in class nxopen.cae.ReassignElementsBuilder.ElementDimensionOption
-
1-d
- BEAM - Static variable in class nxopen.uf.UFSf.ElementType
-
- BEAM_ELEMENT - Static variable in class nxopen.cae.CaeSetGroupFilterType
-
filter type is 1D element
- BEAM_ELEMENT_FORCE - Static variable in class nxopen.cae.responsesimulation.EvaluationResultType
-
- BEAM_ELEMENT_TYPE_BAR - Static variable in class nxopen.cae.CaeSetGroupFilterType
-
filter type is 1D element of type Bar
- BEAM_ELEMENT_TYPE_BEAM - Static variable in class nxopen.cae.CaeSetGroupFilterType
-
filter type is 1D element of type Beam
- BEAM_ELEMENT_TYPE_BEARING - Static variable in class nxopen.cae.CaeSetGroupFilterType
-
filter type is 1D element of type Bearing
- BEAM_ELEMENT_TYPE_ROD - Static variable in class nxopen.cae.CaeSetGroupFilterType
-
filter type is 1D element of type Rod
- BEAM_FALL_OFF_GRADUAL - Static variable in class nxopen.uf.UFView.LightBeamFallOff
-
- BEAM_FALL_OFF_NONE - Static variable in class nxopen.uf.UFView.LightBeamFallOff
-
- BEAM_FALL_OFF_RAPID - Static variable in class nxopen.uf.UFView.LightBeamFallOff
-
- BEAM_RESULTANTS - Static variable in class nxopen.cae.Result.Quantity
-
- BEAM_RESULTANTS_LEVEL_CROSSING_RATE - Static variable in class nxopen.cae.Result.Quantity
-
- BEAM_STRAIN_RESULTANTS - Static variable in class nxopen.cae.Result.Quantity
-
- BEAM_STRAIN_RESULTANTS_LEVEL_CROSSING_RATE - Static variable in class nxopen.cae.Result.Quantity
-
- beamAftSection() - Method in interface nxopen.cae.BeamSectionOptions
-
Returns the section of aft beam end
License requirements: None.
- beamDataLocation() - Method in interface nxopen.cae.responsesimulation.ElementalFunctionEvaluationSettingBuilder
-
Returns the data location of beam element.
- beamDataLocation() - Method in interface nxopen.cae.responsesimulation.NodalFunctionEvaluationSettingBuilder
-
- BeamEADBuilder - Interface in nxopen.cae
-
- BeamEADBuilder.EndReleaseSetting - Class in nxopen.cae
-
indicates which end release setting to use
- BeamEADBuilder.OrientationMethod - Class in nxopen.cae
-
indicates which orientation method to use
- BeamEADBuilder.State - Class in nxopen.cae
-
indicates to ignore, apply or clear the state property upon commit
- BeamEADBuilder.VectorChoiceType - Class in nxopen.cae
-
indicates which vector choice to use
- beamFallOff - Variable in class nxopen.uf.UFView.LightAttributes
-
- beamFilletRadius - Variable in class nxopen.cae.Result.ResultParameters
-
Deprecated.
- beamForeSection() - Method in interface nxopen.cae.BeamSectionOptions
-
Returns the section of fore beam end
License requirements: None.
- beamLocation() - Method in interface nxopen.cae.responsesimulation.DataLocation
-
Returns the method to define frequency
License requirements: nx_response_anlys ("NX Response Analysis")
.
- beamSect() - Method in interface nxopen.cae.ResultVariable
-
Returns the beam section
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- BeamSection - Interface in nxopen.cae
-
Represents a Beam Cross Section
This is an abstract class.
- beamsection - Variable in class nxopen.cae.Result.ResultSection
-
- BeamSection.DirectionOption - Class in nxopen.cae
-
Represents the direction
- BeamSection.Properties - Class in nxopen.cae
-
Represents the properties of the beam section.
- BeamSectionCollection - Interface in nxopen.cae
-
Represents the collection of all
BeamSection
in a fem part
To obtain an instance of this class, refer to
BaseFEModel
Created in NX5.0.0
- BeamSectionOffsetOptions - Interface in nxopen.cae
-
- BeamSectionOffsetOptions.Method - Class in nxopen.cae
-
Represents the offset definition method
- BeamSectionOffsetOptions.Offset - Class in nxopen.cae
-
Represents the offset value
- BeamSectionOptions - Interface in nxopen.cae
-
Represents the synchronize options to be used when a FEM part is created
These options will be used to synchronize the specified entities from the
master CAD part file to the FEM part file
To create a new instance of this class, use
CaePart.newBeamSectionOptions()
Created in NX5.0.0
- BeamSectionOrientationOptions - Interface in nxopen.cae
-
- BeamSectionOrientationOptions.Method - Class in nxopen.cae
-
Represents the orientation definition method
- beamSections() - Method in interface nxopen.cae.BaseFEModel
-
Returns the Beam Section collection belonging to the part .
- beamSectionTapered() - Method in interface nxopen.cae.BeamSectionOptions
-
Returns the flag indicating whether the beam section is tapered
License requirements: None.
- beamSectionTaperedChaining() - Method in interface nxopen.cae.BeamSectionOptions
-
Returns the flag indicating whether the beam section is in tapered chaining
License requirements: None.
- beamStress() - Method in interface nxopen.cae.DurabilityStressAxesBuilder
-
Returns the beam stress.
- BEFORE - Static variable in class nxopen.annotations.DiameterRadiusLeaderStub
-
Specifies leader stub before the dimension text
- BEFORE - Static variable in class nxopen.annotations.DiameterRadiusSymbolPlacement
-
Specifies diameter/radius symbol is placed before dimension text
- BEFORE - Static variable in class nxopen.annotations.DualDimensionPlacement
-
Specifies dual dimension before primary dimension
- BEFORE - Static variable in class nxopen.blockstyler.SetList.InsertionLocation
-
- BEFORE - Static variable in class nxopen.cae.SimSolution.StepPosition
-
before the specified step
- BEFORE - Static variable in class nxopen.cam.CAMSetup.Paste
-
paste before
- BEFORE - Static variable in class nxopen.drawings.ScalePositionTypes
-
- BEFORE - Static variable in class nxopen.features.FeatureCollection.ReorderType
-
- BEFORE - Static variable in class nxopen.mechatronics.SystemObject.ReorderType
-
Before
- BEFORE - Static variable in class nxopen.MeshProfileString.InsertOrder
-
- BEFORE - Static variable in class nxopen.uf.UFGdt.TextLocation
-
- BEFORE_CONTAINMENT - Static variable in class nxopen.cam.RoughFinishTurningBuilder.ToleranceOffsetTypes
-
Tolerance offset before containment.
- BEFORE_CONTAINMENT - Static variable in class nxopen.cam.TurnFeatureGeomBuilder.ToleranceOffsetModes
-
Tolerance offset before containment.
- BEFORE_IMPACT - Static variable in class nxopen.cae.responsesimulation.VelocityImpactParameters.StartPositionType
-
Calculation ends at the impact time
- BEFORE_LEAD_IN - Static variable in class nxopen.cam.NcmWedmBuilder.CutcomOnTypes
-
cutcom on before lead in
- BEFORE_LEAD_OUT - Static variable in class nxopen.cam.NcmWedmBuilder.CutcomOffTypes
-
cutcom off before lead out
- BEFORE_OR_AFTER_STUB - Static variable in class nxopen.drawings.ViewDetailLabelBuilder.LabelParentTextPlacement
-
- BEFORE_RETRACT - Static variable in class nxopen.cam.CenterlineDrillTurningBuilder.SpindleStopTypes
-
Spindle stop: Before retract
- BEFORE_THREAD_POINT - Static variable in class nxopen.cam.NcmWedmBuilder.CutcomOffTypes
-
cutcom off before thread point
- beforeName() - Method in interface nxopen.PartReopenStatus
-
Returns the name of the part before it was reopened.
- beforeText() - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
Returns the before text
License requirements: None.
- beforeTextType() - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
Returns the before text enum
License requirements: None.
- BEG_APPLY_DEFS_CB - Static variable in class nxopen.uf.UFClone.NotifyCb
-
- BEG_ASSY_LOAD_CB - Static variable in class nxopen.uf.UFClone.NotifyCb
-
- BEG_ASSY_NC_LOAD_CB - Static variable in class nxopen.uf.UFClone.NotifyCb
-
- BEG_NONOCC_REPORT_CB - Static variable in class nxopen.uf.UFClone.NotifyCb
-
- BEG_OCC_REPORT_CB - Static variable in class nxopen.uf.UFClone.NotifyCb
-
- BEG_PART_CI - Static variable in class nxopen.uf.UFClone.NotifyCb
-
- BEG_PART_CLONE_CB - Static variable in class nxopen.uf.UFClone.NotifyCb
-
- BEG_PART_CO - Static variable in class nxopen.uf.UFClone.NotifyCb
-
- BEG_PART_LOAD_CB - Static variable in class nxopen.uf.UFClone.NotifyCb
-
- BEG_PART_LOAD_NC_CB - Static variable in class nxopen.uf.UFClone.NotifyCb
-
- BEG_PERFORM_CB - Static variable in class nxopen.uf.UFClone.NotifyCb
-
- BEG_SET_ACTION_CB - Static variable in class nxopen.uf.UFClone.NotifyCb
-
- BEG_SET_CI_CB - Static variable in class nxopen.uf.UFClone.NotifyCb
-
- BEG_SET_CO_CB - Static variable in class nxopen.uf.UFClone.NotifyCb
-
- BEG_SET_DEF_ACTION_CB - Static variable in class nxopen.uf.UFClone.NotifyCb
-
- BEG_SET_DEF_CI_CB - Static variable in class nxopen.uf.UFClone.NotifyCb
-
- BEG_SET_DEF_CO_CB - Static variable in class nxopen.uf.UFClone.NotifyCb
-
- BEG_SET_DEF_ITEM_TYPE_CB - Static variable in class nxopen.uf.UFClone.NotifyCb
-
- BEG_SET_DEF_NAMING_CB - Static variable in class nxopen.uf.UFClone.NotifyCb
-
- BEG_SET_DEF_PDM_DESC_CB - Static variable in class nxopen.uf.UFClone.NotifyCb
-
- BEG_SET_DEF_PDM_NAME_CB - Static variable in class nxopen.uf.UFClone.NotifyCb
-
- BEG_SET_ITEM_TYPE_CB - Static variable in class nxopen.uf.UFClone.NotifyCb
-
- BEG_SET_NAME_CB - Static variable in class nxopen.uf.UFClone.NotifyCb
-
- BEG_SET_NAME_RULE_CB - Static variable in class nxopen.uf.UFClone.NotifyCb
-
- BEG_SET_NAMING_CB - Static variable in class nxopen.uf.UFClone.NotifyCb
-
- BEG_SET_PDM_DESC_CB - Static variable in class nxopen.uf.UFClone.NotifyCb
-
- BEG_SET_PDM_NAME_CB - Static variable in class nxopen.uf.UFClone.NotifyCb
-
- BEGIN_GROUP - Static variable in class nxopen.uistyler.StylerItem.ItemType
-
Begin Group item
- beginAssemblyConstraints() - Method in interface nxopen.positioning.ComponentPositioner
-
Begins a mode of operation where (1) each new
Constraint
created by this
ComponentPositioner
applies to
components in the part of the positioner (or to components with variable component positioning
defined in the part of the positioner) and (2) and component transforms derived from
a
Network
will apply to components in the part of the positioner.
- beginDrag() - Method in interface nxopen.positioning.Network
-
Notify the network that a sequence of drag operations is about to
begin.
- beginDragCursorPosition - Variable in class nxopen.features.subdivision.CageManipulatorData.ObjectMoveData
-
The point from which object dragging is initiated, the point
under the cursor when seen in view direction.
- beginDragObjectPosition - Variable in class nxopen.features.subdivision.CageManipulatorData.ObjectMoveData
-
The point on object near cursor from which object dragging is initiated
- beginMoveComponent() - Method in interface nxopen.positioning.ComponentPositioner
-
Begins a mode of operation where (1) each new
Constraint
is created as transient and (2) a component transform is applied at the level where
position is controlled for the component, typically in the component's immediate parent.
- beginTaskEnvironment() - Method in interface nxopen.Session
-
This method is called by the NX user interface before
entering a task environment.
- beginTimer() - Method in interface nxopen.uf.UF
-
- BELL - Static variable in class nxopen.features.IFormBuilder.GlobalTransitionTypes
-
Bell type global transition
- BELL_CRANK - Static variable in class nxopen.die.FlangeTaskBuilder.CamTypes
-
Bell Crank
- BELOW - Static variable in class nxopen.annotations.DiameterRadiusLeaderStub
-
Specfies leader stub below the dimension text
- BELOW - Static variable in class nxopen.annotations.DiameterRadiusSymbolPlacement
-
Specifies diameter/radius symbol is placed below dimension text
- BELOW - Static variable in class nxopen.annotations.DualDimensionPlacement
-
Specifies dual dimension below primary dimension
- BELOW - Static variable in class nxopen.annotations.StackAlignmentPosition
-
- BELOW - Static variable in class nxopen.annotations.TableSectionStyleBuilder.DisplayContinuationNoteType
-
Below
- BELOW - Static variable in class nxopen.annotations.TableSectionStyleBuilder.LocationOfHeader
-
Below
- BELOW - Static variable in class nxopen.annotations.TolerancePlacement
-
Specifies tolerance below dimension text
- BELOW - Static variable in class nxopen.assemblies.PlaneSearchTerm.PlaneOverlapLogicType
-
Include objects residing below the plane defined by this search term
- BELOW - Static variable in class nxopen.drawings.LabelPositionTypes
-
- BELOW - Static variable in class nxopen.drawings.ScalePositionTypes
-
- BELOW - Static variable in class nxopen.features.EmbossRegion.ConvexityOption
-
Indicates the emboss geometry is below the target("Pocket").
- BELOW - Static variable in class nxopen.features.shipdesign.ShipCoordinatesBuilder.ZDirectionType
-
- BELOW - Static variable in class nxopen.uf.UFGdt.TextLocation
-
- BELOW_BOTTOM_EXTENDED_TO_MAXIMUM - Static variable in class nxopen.annotations.HoleCalloutSettingsBuilder.LeaderAttachment
-
- BELOW_OR_INTERSECTS - Static variable in class nxopen.assemblies.PlaneSearchTerm.PlaneOverlapLogicType
-
Include objects residing below or intersecting the plane defined by this search term
- BELOW_TOP - Static variable in class nxopen.annotations.DraftingNoteBuilder.TextAlign
-
Align below top
- BELOW_TOP_EXT_TO_MAX - Static variable in class nxopen.annotations.DraftingNoteBuilder.TextAlign
-
Align below top extension to maximum
- BELOW_TOP_EXT_TO_MAX_UNDERLINE - Static variable in class nxopen.annotations.DraftingNoteBuilder.TextAlign
-
Align below top extension to maximum and underline
- BELOW_TOP_EXTENDED_TO_MAXIMUM - Static variable in class nxopen.annotations.HoleCalloutSettingsBuilder.LeaderAttachment
-
- BELOW_TOP_FACE - Static variable in class nxopen.cam.GroupFeatures.FeaturesToGroupTypes
-
- BELOW_TOP_UNDERLINE - Static variable in class nxopen.annotations.DraftingNoteBuilder.TextAlign
-
Align below top and underline
- BELOWBOTTOM - Static variable in class nxopen.annotations.DraftingNoteBuilder.TextAlign
-
Align below bottom
- BELOWBOTTOM_EXT_TO_MAX - Static variable in class nxopen.annotations.DraftingNoteBuilder.TextAlign
-
Align below bottom extension to maximum
- BELOWBOTTOM_EXT_TO_MAX_UNDERLINE - Static variable in class nxopen.annotations.DraftingNoteBuilder.TextAlign
-
Align below bottom extension to maximum and underline
- BELOWBOTTOM_UNDERLINE - Static variable in class nxopen.annotations.DraftingNoteBuilder.TextAlign
-
Align below bottom and underline
- belowMarkHideType - Variable in class nxopen.cae.Post.Mark
-
- belowResultPercent - Variable in class nxopen.cae.Post.Mark
-
- belowResultValue - Variable in class nxopen.cae.Post.Mark
-
- belowText() - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
Returns the below text
License requirements: None.
- belowTextType() - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
Returns the below text enum
License requirements: None.
- BELT - Static variable in class nxopen.features.shipdesign.ProfileBuilder.TypeOption
-
- BELT - Static variable in class nxopen.features.shipdesign.UpdateShipLibraryBuilder.ShipLibOptionType
-
- beltAlignment() - Method in interface nxopen.features.shipdesign.ProfileBuilder
-
Returns the belt alignment
License requirements: None.
- beltAttributes() - Method in interface nxopen.die.MachineReliefBuilder
-
Returns the attribute title, value and face color to apply to the belt faces.
- beltFace() - Method in interface nxopen.features.StepBuilder
-
Returns the selected belt face
License requirements: None.
- beltFaceThickness() - Method in interface nxopen.die.MachineReliefBuilder
-
Returns the expression containing the value to apply for the belt face on the cam definition.
- beltRouting() - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder
-
Returns the belt routing type
License requirements: None.
- beltSize() - Method in interface nxopen.features.shipdesign.ProfileBuilder
-
Returns the belt size options
License requirements: None.
- beltThickness() - Method in interface nxopen.die.DrawDiePunchSectionBuilder
-
Returns the belt thickness of the draw die punch casting.
- beltThickness() - Method in interface nxopen.die.SteelInsertSectionBuilder
-
Returns the belt thickness
License requirements: ug_die_design ("Die Design")
.
- beltThickness() - Method in interface nxopen.die.SteelInsertSegmentChildBuilder
-
Returns the belt thickness
License requirements: ug_die_design ("Die Design")
.
- beltThickness() - Method in interface nxopen.die.SteelInsertSegmentParentBuilder
-
Returns the belt thickness
License requirements: ug_die_design ("Die Design")
.
- beltThickness() - Method in interface nxopen.tooling.DieDesDrawPunchBuilder
-
Returns the belt thickness, which is used for define the belt thickness of the punch.
- beltThickness() - Method in interface nxopen.tooling.DieDesignTrimPostBuilder
-
Returns the belt thickness parameter of Trim Post section
License requirements: ug_die_design ("Die Design")
.
- beltType() - Method in interface nxopen.features.shipdesign.ProfileBuilder
-
Returns the belt type options
License requirements: None.
- BEND - Static variable in class nxopen.drawings.SectionLineSegmentBuilder.Types
-
- BEND - Static variable in class nxopen.drawings.SectionLineSegmentPointBuilder.SegmentTypes
-
- Bend - Interface in nxopen.features
-
Represents a Bend feature
To create or edit an instance of this class, use
BendBuilder
Created in NX5.0.0
- BEND - Static variable in class nxopen.features.sheetmetal.AeroFlangeBuilder.DirType
-
Bend Direction Type
- BEND - Static variable in class nxopen.features.sheetmetal.FlexibleCableBuilder.SegmentTypeOptions
-
Bend cable segment.
- BEND - Static variable in class nxopen.features.sheetmetal.SheetmetalFaceType
-
- BEND - Static variable in class nxopen.features.shipdesign.StiffenerBuilder.KnuckleOptions
-
Bend at the knuckle points
- BEND - Static variable in class nxopen.preferences.RoutingPath.AllowedCornerType
-
UF_ROUTE_AV_CORNERS_BEND
- BEND - Static variable in class nxopen.preferences.RoutingPath.DefaultCornerType
-
Bend Corner
- BEND - Static variable in class nxopen.routing.Corner.Type
-
Bend corner
- BEND - Static variable in class nxopen.routing.CornerTypeBuilder.Type
-
- BEND_AFTER_JOIN - Static variable in class nxopen.features.shipdesign.BuiltUpManModeBuilder.BuiltUpManModeType
-
- BEND_ALLOWANCE - Static variable in class nxopen.tooling.DefineNeutralFactorBuilder.FormulaOptions
-
Bend allowance formula use different formula according to inner bend radius and thickness
- BEND_ALLOWANCE_FORMULA - Static variable in class nxopen.preferences.PartSheetmetal.BendDefinitionMethodOptions
-
The bend allowance formula method
- BEND_AND_FACE - Static variable in class nxopen.features.sheetmetal.BendOptions.CornerReliefTypeOptions
-
igBendAndFaceCornerRelief
- BEND_AND_FACE_CHAIN - Static variable in class nxopen.features.sheetmetal.BendOptions.CornerReliefTypeOptions
-
igChainedCornerRelief
- BEND_CENTER - Static variable in class nxopen.features.sheetmetal.ClosedCornerBuilder.OriginTypes
-
The relief origin will be at the intersection of first bend's centerline and bisector of corrner angle.
- BEND_CENTER - Static variable in class nxopen.features.sheetmetal.ThreeBendCornerBuilder.OriginTypes
-
The relief origin will be at the intersection of first bend's centerline and bisector of corner angle.
- BEND_CENTER_LINE - Static variable in class nxopen.preferences.PartFlexiblePrintedCircuitDesign.FlatPatternObjectType
-
Deprecated
- BEND_CENTER_LINE - Static variable in class nxopen.preferences.PartSheetmetal.FlatPatternObjectType
-
Deprecated
- BEND_CENTER_LINE - Static variable in class nxopen.sheetmetal.FlatPatternSettings.FlatPatternObjectType
-
Deprecated
- BEND_DOWN_CENTER_LINE - Static variable in class nxopen.preferences.PartFlexiblePrintedCircuitDesign.FlatPatternObjectType
-
- BEND_DOWN_CENTER_LINE - Static variable in class nxopen.preferences.PartSheetmetal.FlatPatternObjectType
-
- BEND_DOWN_CENTER_LINE - Static variable in class nxopen.sheetmetal.FlatPatternSettings.FlatPatternObjectType
-
- BEND_FACE - Static variable in class nxopen.features.sheetmetal.BendTaperBuilder.ChainingType
-
Deprecated.
Bend and Face
- BEND_FACE_CHAIN - Static variable in class nxopen.features.sheetmetal.BendTaperBuilder.ChainingType
-
Deprecated.
Bend and Face Chain
- BEND_ONLY - Static variable in class nxopen.features.sheetmetal.BendOptions.CornerReliefTypeOptions
-
igBendOnlyCornerRelief
- BEND_ONLY - Static variable in class nxopen.features.sheetmetal.BendTaperBuilder.ChainingType
-
Deprecated.
Bend Only
- BEND_OPERATION_BEND_TO_ANGLE - Static variable in class nxopen.uf.UFModl.BendOperationE
-
- BEND_OPERATION_REBEND - Static variable in class nxopen.uf.UFModl.BendOperationE
-
- BEND_OPERATION_UNBEND - Static variable in class nxopen.uf.UFModl.BendOperationE
-
- BEND_OUTSIDE - Static variable in class nxopen.features.sheetmetal.AeroFlangeBuilder.MatType
-
Bend Outside
- BEND_OUTSIDE - Static variable in class nxopen.features.sheetmetal.FlangeBuilder.InsetTypeOptions
-
The bend and flange are outside the thickness face
- BEND_OUTSIDE - Static variable in class nxopen.features.sheetmetal.HemFlangeBuilder.InsetTypeOptions
-
The bend and hem flange are outside the thickness face
- BEND_OUTSIDE - Static variable in class nxopen.features.sheetmetal.JogBuilder.BendLocationOptions
-
- BEND_RADIUS_TABLE - Static variable in class nxopen.routing.CornerTypeBuilder.BendMethods
-
Bend table method creates bend from specified bend table
- BEND_RADIUS_TABLE - Static variable in class nxopen.routing.CornerTypeBuilder.BendOptions
-
Deprecated.
Bend table method creates bend from specified bend table
- BEND_TABLE - Static variable in class nxopen.preferences.PartSheetmetal.BendDefinitionMethodOptions
-
The bend table method
- BEND_TABLE - Static variable in class nxopen.preferences.RoutingPath.DefaultCornerType
-
Not really a corner type.
- BEND_TANGENT_LINE - Static variable in class nxopen.preferences.PartFlexiblePrintedCircuitDesign.FlatPatternObjectType
-
- BEND_TANGENT_LINE - Static variable in class nxopen.preferences.PartSheetmetal.FlatPatternObjectType
-
- BEND_TANGENT_LINE - Static variable in class nxopen.sheetmetal.FlatPatternSettings.FlatPatternObjectType
-
- BEND_UP_CENTER_LINE - Static variable in class nxopen.preferences.PartFlexiblePrintedCircuitDesign.FlatPatternObjectType
-
- BEND_UP_CENTER_LINE - Static variable in class nxopen.preferences.PartSheetmetal.FlatPatternObjectType
-
- BEND_UP_CENTER_LINE - Static variable in class nxopen.sheetmetal.FlatPatternSettings.FlatPatternObjectType
-
- bendAllowance() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
Returns the bend allowance formula.
- bendAllowance - Variable in class nxopen.uf.UFSmd.AskBendLineData
-
- bendAllowance - Variable in class nxopen.uf.UFSmd.SeqOutput
-
- bendAllowanceFormula - Variable in class nxopen.uf.UFModl.FlangeData
-
- bendAllowanceFormula - Variable in class nxopen.uf.UFModl.SmjoggleData
-
- bendAndEndSegmentWidthFactor() - Method in interface nxopen.drawings.ViewSectionLineBuilder
-
Returns the section line bend and end segment width factor
License requirements: None.
- bendAngle() - Method in interface nxopen.features.sheetmetal.FlangeBuilder
-
Returns the bend angle for flange.
- bendAngle() - Method in interface nxopen.features.sheetmetal.FlexibleCableSegment
-
Returns the bend angle.
- bendAngle - Variable in class nxopen.features.sheetmetal.SheetmetalBendParameters
-
Bend Angle
- bendAngle() - Method in interface nxopen.routing.RouteSweptFoldBuilder
-
Returns the bend angle
License requirements: routing_harness ("Routing Harness")
.
- bendAngle - Variable in class nxopen.uf.UFNxsm.BendData
-
- bendAngle1() - Method in interface nxopen.tooling.BendOperationBuilder
-
Returns the first angle of prebend.
- bendAngle1() - Method in interface nxopen.tooling.DirectUnbendBuilder
-
Returns the first angle of prebend.
- bendAngle2() - Method in interface nxopen.tooling.BendOperationBuilder
-
Returns the second angle of prebend.
- bendAngle2() - Method in interface nxopen.tooling.DirectUnbendBuilder
-
Returns the second angle of prebend.
- bendAngle3() - Method in interface nxopen.tooling.BendOperationBuilder
-
Returns the third angle of prebend.
- bendAngle3() - Method in interface nxopen.tooling.DirectUnbendBuilder
-
Returns the third angle of prebend.
- bendAngle4() - Method in interface nxopen.tooling.BendOperationBuilder
-
Returns the fourth angle of prebend.
- bendAngle4() - Method in interface nxopen.tooling.DirectUnbendBuilder
-
Returns the fourth angle of prebend.
- bendAngle5() - Method in interface nxopen.tooling.BendOperationBuilder
-
Returns the fifth angle of prebend.
- bendAngle5() - Method in interface nxopen.tooling.DirectUnbendBuilder
-
Returns the fifth angle of prebend.
- bendAngle6() - Method in interface nxopen.tooling.DirectUnbendBuilder
-
Returns the sixth angle of prebend.
- bendAngleDirection() - Method in interface nxopen.features.sheetmetal.FlexibleCableSegment
-
Returns the bend angle direction.
- BendBuilder - Interface in nxopen.features.sheetmetal
-
Represents a Bend feature builder.
- BendBuilder.BendDirectionOptions - Class in nxopen.features.sheetmetal
-
This enum represents the Bend Direction for Bend.
- BendBuilder.BendLocationOptions - Class in nxopen.features.sheetmetal
-
This enum represents the Bend Location (Material Side) for Bend.
- BendBuilder.FixedSideOptions - Class in nxopen.features.sheetmetal
-
This enum represents the Fixed Side for Bend.
- bendClosureType() - Method in interface nxopen.features.sheetmetal.EditCornerBuilder
-
Returns the bend type
License requirements: None.
- BendCorner - Interface in nxopen.routing
-
Computes a fillet curve between two linear segments to form a smooth
bend transition from one segment to another.
- BendCornerCollection - Interface in nxopen.routing
-
- BendCornerCollection.Type - Class in nxopen.routing
-
Option for creating a bend using a bend table or using radius or ratio
- bendCorners() - Method in interface nxopen.routing.RouteManager
-
BendCorner collection .
- bendCurve() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the bend curve
License requirements: None.
- bendCurve - Variable in class nxopen.routing.SBendCornerCollection.ComputeSBendData
-
S-Bend spline when a valid solution exists;
null otherwise.
- BendData() - Constructor for class nxopen.uf.UFNxsm.BendData
-
- BendData(Tag, String, UFNxsm.FeaturePropertyConstants, UFNxsm.FeaturePropertyConstants, UFNxsm.FeaturePropertyConstants, UFNxsm.FeaturePropertyConstants, UFNxsm.BendOption) - Constructor for class nxopen.uf.UFNxsm.BendData
-
- bendDevelopedLength() - Method in interface nxopen.tooling.DefineNeutralFactorBuilder
-
Returns the bend developed length, the length of a unfolded bend feature
License requirements: None.
- bendDevLength() - Method in interface nxopen.tooling.BendOperationBuilder
-
Returns the operation to developed length of a bend.
- bendDevLength() - Method in interface nxopen.tooling.DirectUnbendBuilder
-
Returns the operation to developed length of a bend.
- bendDir - Variable in class nxopen.uf.UFModl.SmbendData
-
- bendDir - Variable in class nxopen.uf.UFNxsm.BendData
-
- bendDirection - Variable in class nxopen.uf.UFSmd.SeqOutput
-
- bendDown() - Method in interface nxopen.features.sheetmetal.ExportFlatPatternBuilder
-
Returns the bend down center line output flag
License requirements: None.
- bendEdge - Variable in class nxopen.uf.UFModl.BendOperationData
-
- bendEdges() - Method in interface nxopen.features.sheetmetal.SheetMetalFromSolidBuilder
-
Returns the bend edges
License requirements: None.
- bendFace() - Method in interface nxopen.features.sheetmetal.GussetBuilder
-
Returns the bend face
Selects the bend face along which the gusset is placed.
- bendFace() - Method in interface nxopen.features.sheetmetal.MigratedPanelBuilder
-
Returns
the parent bend face.
- bendFace() - Method in interface nxopen.features.sheetmetal.ResizeBendAngleBuilder
-
Returns the bend face
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- bendFace() - Method in interface nxopen.tooling.BendInsertDesignBuilder
-
Returns the bend face.
- bendFace() - Method in interface nxopen.tooling.HemFixerBuilder
-
Returns the bend face that connects flange and base body
License requirements: None.
- bendFace() - Method in interface nxopen.tooling.PrebendBuilder
-
Returns the bend face to divide
License requirements: None.
- bendFace - Variable in class nxopen.uf.UFModl.BendOperationData
-
- bendFaces() - Method in interface nxopen.features.sheetmetal.AeroJoggleBuilder
-
Returns the flange
License requirements: aero_sheet_metal ("Aerospace Sheet Metal")
.
- bendFaces() - Method in interface nxopen.features.sheetmetal.ResizeBendRadiusBuilder
-
Returns the bend faces
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- bendFaces() - Method in interface nxopen.features.sheetmetal.ResizeNeutralFactorBuilder
-
Returns the bend face list provided by user
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- bendFaces() - Method in interface nxopen.tooling.UnfoldingSimulationBuilder
-
Returns the bend faces
License requirements: None.
- bendFaces() - Method in interface nxopen.tooling.UniversalUnformBuilder
-
Returns the bend faces
License requirements: None.
- bendFaces - Variable in class nxopen.uf.UFNxsm.ClosedCornerData
-
- bendFormula - Variable in class nxopen.uf.UFSmd.AskBendLineData
-
- BENDING - Static variable in class nxopen.cae.Result.Section
-
- BENDING - Static variable in class nxopen.tooling.ForceCalculationBuilder.ProcessTypes
-
bending
- BENDING - Static variable in class nxopen.tooling.QuickQuotationBuilder.ObjectTypes
-
sheet body type is piercing
- BENDING_S - Static variable in class nxopen.cae.Result.Component
-
- BENDING_T - Static variable in class nxopen.cae.Result.Component
-
- BENDING_XX - Static variable in class nxopen.cae.Result.Component
-
- BENDING_XY - Static variable in class nxopen.cae.Result.Component
-
- BENDING_YY - Static variable in class nxopen.cae.Result.Component
-
- bendingArm() - Method in interface nxopen.motion.JointFrictionAdams
-
- bendingArm() - Method in interface nxopen.motion.JointFrictionRecurDyn
-
- bendingArmExpression() - Method in interface nxopen.motion.JointFrictionAdams
-
Returns the bending arm expression
License requirements: None.
- bendingArmExpression() - Method in interface nxopen.motion.JointFrictionRecurDyn
-
Returns the bending arm expression
License requirements: None.
- bendingColor() - Method in interface nxopen.tooling.QuickQuotationBuilder
-
Returns the bending color.
- bendingDirection() - Method in interface nxopen.tooling.BendInsertDesignBuilder
-
Returns the bending direction.
- bendingReactionArm() - Method in interface nxopen.motion.JointFrictionLms
-
Returns the bending reaction arm
License requirements: None.
- bendInsertDesign() - Method in interface nxopen.tooling.ToolingManager
-
Returns the BendInsertDesign instance belonging to this part .
- BendInsertDesignBuilder - Interface in nxopen.tooling
-
- BendInsertDesignBuilder.BendingDirectionOption - Class in nxopen.tooling
-
the bending direction.
- BendInsertDesignBuilder.BendTypeOption - Class in nxopen.tooling
-
the bend type.
- BendInsertDesignBuilder.BlankPositions - Class in nxopen.tooling
-
Specifies the blank position.
- BendInsertDesignBuilder.InsertTypeOption - Class in nxopen.tooling
-
the insert type.
- BendInsertDesignBuilder.ParentOption - Class in nxopen.tooling
-
the parent node.
- BendInsertDesignBuilder.Types - Class in nxopen.tooling
-
the bending operation.
- BendInsertDesignCollection - Interface in nxopen.tooling
-
- bendlines() - Method in interface nxopen.drawings.SectionViewStyle
-
Returns the status of bendlines
License requirements: None.
- bendlines() - Method in interface nxopen.drawings.ViewStyleSectionBuilder
-
Returns the bendlines toggle on the SECTION tab of the View Style Dialog
License requirements: None.
- bendlines() - Method in interface nxopen.preferences.SectionViewPreferences
-
Returns the status of bendlines
License requirements: None.
- bendLines - Variable in class nxopen.uf.UFSmd.AskBendLinesData
-
- bendList - Variable in class nxopen.uf.UFNxsm.UnbendData
-
- bendLocation() - Method in interface nxopen.drawings.HalfSectionLineBuilder
-
- bendLocation() - Method in interface nxopen.features.sheetmetal.BendBuilder
-
Returns the Bend Location (Material Side)
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- bendLocation() - Method in interface nxopen.features.sheetmetal.JogBuilder
-
Returns
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- bendMethod() - Method in interface nxopen.routing.BendCorner
-
Returns the bend method
License requirements: routing_base ("Routing Basic")
.
- bendMoment() - Method in interface nxopen.motion.JointFrictionAdams
-
Returns the bend moment
License requirements: mechanisms ("MECHANISMS")
.
- bendMoment() - Method in interface nxopen.motion.JointFrictionRecurDyn
-
Returns the bend moment
License requirements: mechanisms ("MECHANISMS")
.
- bendNeutralFactor() - Method in interface nxopen.tooling.BendOperationBuilder
-
Returns the operation of k factor for a single bend.
- bendNeutralFactor() - Method in interface nxopen.tooling.DirectUnbendBuilder
-
Returns the operation of k factor for a single bend.
- bendNumPrebends() - Method in interface nxopen.tooling.BendOperationBuilder
-
Returns the number of prebends.
- bendNumPrebends() - Method in interface nxopen.tooling.DirectUnbendBuilder
-
Returns the number of prebends.
- bendObject - Variable in class nxopen.uf.UFDraw.HalfSxsegs
-
- bendOperation() - Method in interface nxopen.tooling.ToolingManager
-
Returns the BendOperationCollection instance belonging to this part .
- BendOperationBuilder - Interface in nxopen.tooling
-
- BendOperationBuilder.OverbendOptions - Class in nxopen.tooling
-
The overbend option.
- BendOperationBuilder.Prebend - Class in nxopen.tooling
-
The number of children bends of prebend.
- BendOperationBuilder.Types - Class in nxopen.tooling
-
unbend operations.
- BendOperationCollection - Interface in nxopen.tooling
-
- BendOperationData() - Constructor for class nxopen.uf.UFModl.BendOperationData
-
- BendOperationData(UFModl.BendOperationE, Tag, Tag, boolean, Tag, String, String, boolean) - Constructor for class nxopen.uf.UFModl.BendOperationData
-
- BendOption() - Constructor for class nxopen.uf.UFNxsm.BendOption
-
- BendOption(String, boolean, boolean, boolean, UFNxsm.FeaturePropertyConstants, String, boolean, String, boolean, boolean, UFNxsm.FeaturePropertyConstants, String, boolean) - Constructor for class nxopen.uf.UFNxsm.BendOption
-
- bendOptions() - Method in interface nxopen.features.sheetmetal.AeroFlangeBuilder
-
Returns the base edge section object for the flange.
- bendOptions() - Method in interface nxopen.features.sheetmetal.BendBuilder
-
Returns the Bend Options
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- BendOptions - Interface in nxopen.features.sheetmetal
-
Represents a Sheetmetal Bend Options class.
- bendOptions() - Method in interface nxopen.features.sheetmetal.ContourFlangeBuilder
-
Returns the bend options
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- bendOptions() - Method in interface nxopen.features.sheetmetal.EditBendBuilder
-
Returns the bend options
License requirements: None.
- bendOptions() - Method in interface nxopen.features.sheetmetal.FlangeBuilder
-
Returns the bend options object.
- bendOptions() - Method in interface nxopen.features.sheetmetal.JogBuilder
-
Returns the bend options
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- bendOptions() - Method in interface nxopen.features.sheetmetal.LoftedFlangeBuilder
-
Returns the bend options object.
- bendOptions() - Method in interface nxopen.features.sheetmetal.MigratedPanelBuilder
-
Returns the bend options for the panel feature.
- bendOptions() - Method in interface nxopen.features.sheetmetal.SheetMetalFromSolidBuilder
-
Returns the bend options
License requirements: None.
- bendOptions - Variable in class nxopen.uf.UFNxsm.BaseCflangeData
-
- bendOptions - Variable in class nxopen.uf.UFNxsm.BendData
-
- bendOptions - Variable in class nxopen.uf.UFNxsm.JogData
-
- bendOptions - Variable in class nxopen.uf.UFNxsm.SecCflangeData
-
- BendOptions.BendReliefTypeOptions - Class in nxopen.features.sheetmetal
-
This enum represents the bend relief type.
- BendOptions.CornerReliefTypeOptions - Class in nxopen.features.sheetmetal
-
This enum represents the corner relief type.
- bendParmType - Variable in class nxopen.uf.UFNxsm.BaseCflangeData
-
- bendParmType - Variable in class nxopen.uf.UFNxsm.SecCflangeData
-
- bendRad - Variable in class nxopen.uf.UFNxsm.FlangeData
-
- bendRadius() - Method in interface nxopen.features.sheetmetal.BendOptions
-
Returns the bend radius.
- bendRadius() - Method in interface nxopen.features.sheetmetal.FlexibleCableSegment
-
Returns the bend radius.
- bendRadius() - Method in interface nxopen.features.sheetmetal.MigratedPanelBuilder
-
Returns
the bend radius expression.
- bendRadius() - Method in interface nxopen.features.sheetmetal.ResizeBendRadiusBuilder
-
Returns the bend radius
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- bendRadius() - Method in interface nxopen.routing.BendCorner
-
Returns the bend radius of the corner.
- bendRadius() - Method in interface nxopen.routing.MiteredBendCorner
-
Returns the bend radius of the corner.
- bendRadius() - Method in interface nxopen.routing.OffsetPath
-
Returns the bend radius for an offset object.
- bendRadius() - Method in interface nxopen.routing.RouteSweptFoldBuilder
-
Returns the bend radius
License requirements: routing_harness ("Routing Harness")
.
- bendRadius() - Method in interface nxopen.tooling.HemFixerBuilder
-
Returns the bend radius that defines radius of inner bend face
License requirements: None.
- bendRadius - Variable in class nxopen.uf.UFNxsm.BendOption
-
- bendRadius1 - Variable in class nxopen.uf.UFModl.SmjoggleData
-
- bendRadius2 - Variable in class nxopen.uf.UFModl.SmjoggleData
-
- bendRatio() - Method in interface nxopen.routing.BendCorner
-
Returns the bend ratio to apply when computing the bend radius
License requirements: routing_base ("Routing Basic")
.
- bendRatio() - Method in interface nxopen.routing.OffsetPath
-
Returns the bend ratio for an offset object.
- bendRelief - Variable in class nxopen.uf.UFNxsm.BendOption
-
- bendReliefDepth() - Method in interface nxopen.features.sheetmetal.BendOptions
-
Returns the bend relief depth.
- bendReliefDepth() - Method in interface nxopen.features.sheetmetal.ConvertToSheetmetalBuilder
-
Returns the bend relief depth.
- bendReliefDepth() - Method in interface nxopen.features.sheetmetal.HemFlangeBuilder
-
Returns the bend relief depth
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- bendReliefDepth() - Method in interface nxopen.features.sheetmetal.ResizeBendRadiusBuilder
-
Returns the bend relief depth.
- bendReliefDepth - Variable in class nxopen.uf.UFNxsm.BendOption
-
- bendReliefDepthGlobal - Variable in class nxopen.uf.UFNxsm.BendOption
-
- bendReliefType() - Method in interface nxopen.features.sheetmetal.BendOptions
-
Returns the bend relief type.
- bendReliefType() - Method in interface nxopen.features.sheetmetal.ConvertToSheetmetalBuilder
-
Returns the bend relief type.
- bendReliefType() - Method in interface nxopen.features.sheetmetal.HemFlangeBuilder
-
Returns the bend relief type
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- bendReliefType() - Method in interface nxopen.features.sheetmetal.ResizeBendRadiusBuilder
-
- bendReliefType - Variable in class nxopen.uf.UFNxsm.BendOption
-
- bendReliefWidth() - Method in interface nxopen.features.sheetmetal.BendOptions
-
Returns the bend relief width.
- bendReliefWidth() - Method in interface nxopen.features.sheetmetal.ConvertToSheetmetalBuilder
-
Returns the bend relief width.
- bendReliefWidth() - Method in interface nxopen.features.sheetmetal.HemFlangeBuilder
-
Returns the bend relief width
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- bendReliefWidth() - Method in interface nxopen.features.sheetmetal.ResizeBendRadiusBuilder
-
Returns the bend relief width.
- bendReliefWidth - Variable in class nxopen.uf.UFNxsm.BendOption
-
- bendReliefWidthGlobal - Variable in class nxopen.uf.UFNxsm.BendOption
-
- bendState - Variable in class nxopen.features.sheetmetal.SheetmetalBendParameters
-
Bend Face is flat or bent
- bendstates - Variable in class nxopen.features.sheetmetal.SheetmetalManager.InnerBendFacesData
-
Bend Face is flat or bent
- bendTable() - Method in interface nxopen.annotations.TableEditSettingsBuilder
-
Returns the Bend table settings builder
License requirements: None.
- bendTable() - Method in interface nxopen.annotations.TableStyleBuilder
-
Returns the Bend table settings builder
License requirements: None.
- bendTable() - Method in interface nxopen.drafting.PreferencesBuilder
-
Returns the Bend table settings builder
License requirements: None.
- bendTables() - Method in interface nxopen.annotations.AnnotationManager
-
Bend Table collection .
- bendTangent() - Method in interface nxopen.features.sheetmetal.ExportFlatPatternBuilder
-
Returns the bend tangent line output flag
License requirements: None.
- bendTanLines - Variable in class nxopen.uf.UFSmd.AskBendTanLinesData
-
- BendTaper - Interface in nxopen.features
-
Represents a bend taper feature
To create or edit an instance of this class, use
BendTaperBuilder
Created in NX6.0.0
- bendTaperAngle1() - Method in interface nxopen.features.sheetmetal.BendTaperBuilder
-
Returns the bend taper angle1
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- bendTaperAngle2() - Method in interface nxopen.features.sheetmetal.BendTaperBuilder
-
Returns the bend taper angle2
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- BendTaperBuilder - Interface in nxopen.features.sheetmetal
-
- BendTaperBuilder.BendTaperInputMethod - Class in nxopen.features.sheetmetal
-
This enum represents the input methods for the bend taper.
- BendTaperBuilder.BendTaperSides - Class in nxopen.features.sheetmetal
-
This enum represents the taper sides options for the bend taper.
- BendTaperBuilder.BendTaperType - Class in nxopen.features.sheetmetal
-
This enum represents the bend taper types for the bend taper.
- BendTaperBuilder.ChainingType - Class in nxopen.features.sheetmetal
-
- BendTaperBuilder.StartType - Class in nxopen.features.sheetmetal
-
This enum represents the start types for the bend taper.
- BendTaperBuilder.WebTaperType - Class in nxopen.features.sheetmetal
-
This enum represents the web taper types for the bend taper.
- bendTaperInputMethod1() - Method in interface nxopen.features.sheetmetal.BendTaperBuilder
-
Returns the input method for side 1
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- bendTaperInputMethod2() - Method in interface nxopen.features.sheetmetal.BendTaperBuilder
-
Returns the input method for side 2
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- bendTaperSelectBendFace() - Method in interface nxopen.features.sheetmetal.BendTaperBuilder
-
Returns the bend taper select bend face.
- bendTaperType1() - Method in interface nxopen.features.sheetmetal.BendTaperBuilder
-
Returns the bend taper type for Side 1
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- bendTaperType2() - Method in interface nxopen.features.sheetmetal.BendTaperBuilder
-
Returns the bend taper type for Side 2
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- bendType() - Method in interface nxopen.tooling.BendInsertDesignBuilder
-
Returns the bend type.
- bendType() - Method in interface nxopen.tooling.UniversalUnformBuilder
-
Returns the bend type
License requirements: None.
- bendUp() - Method in interface nxopen.features.sheetmetal.ExportFlatPatternBuilder
-
Returns the bend up center line output flag
License requirements: None.
- BENT - Static variable in class nxopen.features.sheetmetal.SheetmetalBendState
-
- BEST_FIT - Static variable in class nxopen.features.AOCSBuilder.FilletOptions
-
Best fitting
- BEST_FIT - Static variable in class nxopen.features.CircularBlendCurveBuilder.CylinderDirectionOption
-
Best fit method
- BEST_FIT - Static variable in class nxopen.features.FitSurfaceBuilder.DirectionType
-
The fit target is sort of rectangular.
- BEST_FIT - Static variable in class nxopen.tooling.BlendCurve3DBuilder.BlendCurveOptions
-
Create blend curve by best fit method
- BESTFIT - Static variable in class nxopen.CGMBuilder.OutputTextOption
-
NX fonts are polylines, standard fonts are text
- BestFitAlignBuilder - Interface in nxopen.facet
-
- BestFitAlignBuilder.ConstraintOptions - Class in nxopen.facet
-
Represents the constraint options
- BETWEEN_AUTOMATIC - Static variable in class nxopen.cae.Mesh3dHexBuilder.Type
-
- BETWEEN_COMPONENTS - Static variable in class nxopen.assemblies.ConstraintDisplayBuilder.VisibleConstraintsRuleOptions
-
Show only constraints that refer only to selected components
- BETWEEN_FIXED - Static variable in class nxopen.positioning.Constraint.SolverStatus
-
Attempt to put constraint between two fixed objects
- BETWEEN_FREQUENCIES - Static variable in class nxopen.cae.LaminateSineEventBuilder.IntermediateFrequeciesEnum
-
Between Frequencies
- BETWEEN_FROM_START - Static variable in class nxopen.cam.CAMObject.Attr
-
- BETWEEN_LOCATIONS - Static variable in class nxopen.features.GeomcopyBuilder.TransformTypes
-
between two point or csys locations
- BETWEEN_MANUAL - Static variable in class nxopen.cae.Mesh3dHexBuilder.Type
-
- BETWEEN_PLANES - Static variable in class nxopen.routing.FittingOverstockBuilder.TrimMethod
-
Double Trim Planes
- BETWEEN_POINTS - Static variable in class nxopen.features.IFormBuilder.InsertionMethodOptions
-
Insert curves between points
- BETWEEN_POINTS - Static variable in class nxopen.features.IsoparametricCurvesBuilder.PlacementTypes
-
Insert curves between points
- BETWEEN_POINTS - Static variable in class nxopen.geometricanalysis.HighlightLinesAnalysisBuilder.LightPlacements
-
Between Points: Two highlight lines are guaranteed to
pass through two given surface points.
- BETWEEN_POINTS - Static variable in class nxopen.geometricanalysis.HighlightLinesAnalysisBuilder.Types
-
Deprecated.
Between Points: Two highlight lines are guaranteed to
pass through two given surface points.
- BETWEEN_POINTS - Static variable in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder.PlacementType
-
Distributed between two specified points
- BETWEEN_POINTS - Static variable in class nxopen.geometricutilities.CurveShapingBuilder.InsertionMethodOptions
-
Insert points between points
- BETWEEN_SETS - Static variable in class nxopen.MeasureDistanceBuilder.DistanceType
-
- BETWEEN_VALUES - Static variable in class nxopen.cae.ResultProbeBuilder.IterationSelection
-
- betweenLocations() - Method in interface nxopen.features.GeomcopyBuilder
-
Returns the between locations data for between locations type of the transformation.
- BetweenLocationsData - Interface in nxopen.geometricutilities
-
- betweenPoints() - Method in interface nxopen.geometricanalysis.HighlightLinesAnalysisBuilder
-
Returns the between points
License requirements: None.
- BEVEL_BUTT - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSymbolType
-
- BEVEL_BUTT - Static variable in class nxopen.annotations.Symbol
-
Specifies bevel butt weld symbol
- BEVEL_BUTT_BROAD_ROOT_FACE - Static variable in class nxopen.annotations.Symbol
-
Specifies bevel butt with broad root face weld symbol (ISO and DIN only)
- BEVEL_BUTT_WITH_BROAD_ROOT_FACE - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSymbolType
-
- BEVEL_GROOVE - Static variable in class nxopen.weld.WeldGrooveBuilder.Types
-
Bevel Groove
- BEVELED - Static variable in class nxopen.features.WrapGeometryBuilder.CloseGapType
-
- BEVELED - Static variable in class nxopen.sim.SinumerikCaSimplifyBodiesBuilder.CloseGapTypes
-
Beveled
- bezelCurve() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
Returns the bezel curve representing the inside perimeter of the closed protective cover (or shell) around a mirror and must be a closed loop of curves.
- BG - Static variable in class nxopen.cae.PreTestExportUnvBuilder.FileUnitsOption
-
BG: Foot (pound f)
- bgdImageEnum() - Method in interface nxopen.display.TrueShadingBuilder
-
Returns the background image list enum
License requirements: None.
- bgdImageFileBrowser() - Method in interface nxopen.display.TrueShadingBuilder
-
Returns the background image filename
License requirements: None.
- bgdTypeEnum() - Method in interface nxopen.display.TrueShadingBuilder
-
Returns the background color or background image type enum
License requirements: None.
- BI_AXIAL - Static variable in class nxopen.cae.DurabilityStressAxesBuilder.ElementFaceStressAxisEnum
-
BiAxial
- BI_AXIAL - Static variable in class nxopen.cae.responsesimulation.StrainGageType
-
- BI_DIRECTIONAL - Static variable in class nxopen.cam.RoughFinishTurningBuilder.CutRegionsTypes
-
Cut regions type: Bi-directional
- BIACROMIAL_BREADTH - Static variable in class nxopen.HumanData.AdvancedScalingType
-
Indicate scaling of biacromial breadth
- biaxialityRatioHistory() - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder
-
Returns the biaxialityRatioHistory.
- BIDELTOID_BREADTH - Static variable in class nxopen.HumanData.AdvancedScalingType
-
Indicate scaling of bideltoid breadth
- BIG_ASTERISK - Static variable in class nxopen.cae.ModelDisplayBuilder.NodeMarkerType
-
Big Asterisk
- BIG_ASTERISK - Static variable in class nxopen.cae.ModelDisplayBuilder.NodeUnattachedMarkerType
-
Big Asterisk
- BIG_ASTERISK - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- BIG_ASTERISK - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- BILATERAL - Static variable in class nxopen.annotations.BaseSurfaceFinishBuilder.ToleranceOption
-
Bilateral
- BILATERAL - Static variable in class nxopen.annotations.SearchCriteriaSurfaceFinishBuilder.ToleranceTypeOptions
-
bilateral
- BILATERAL_ONE_LINE - Static variable in class nxopen.annotations.ToleranceType
-
+-TOL
- BILATERAL_ONE_LINE - Static variable in class nxopen.uf.UFDrf.ToleranceType
-
- BILATERAL_TOLERANCE - Static variable in class nxopen.annotations.SearchCriteriaDimensionBuilder.ToleranceTypes
-
BilateralTolerance
- BILATERAL_TOLERANCE - Static variable in class nxopen.tooling.AutoDimensionBuilder.ToleranceType
-
- BILATERAL_TWO_LINES - Static variable in class nxopen.annotations.ToleranceType
-
+TOL
-TOL
- BILATERAL_TWO_LINES - Static variable in class nxopen.uf.UFDrf.ToleranceType
-
- BillOfMaterialBuilder - Interface in nxopen.annotations
-
Builder for Bill of Material functionality used in Routing.
- BillOfMaterialBuilder.DetailLevelType - Class in nxopen.annotations
-
The options specify the detail level type.
- BillOfMaterialBuilder.FabricationNumberingType - Class in nxopen.annotations
-
The options specify the fabrication numbering type.
- BillOfMaterialBuilder.StockLengthType - Class in nxopen.annotations
-
The options specify the stock length type.
- BINARY - Static variable in class nxopen.STLImporter.FileFormatType
-
STL file is in binary format.
- BINDER - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.TargetBinder
-
For the process, the target of binder is binder.
- BINDER - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.TargetDie
-
For the process, the target of die is binder.
- BINDER - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.TargetPunch
-
For the process, the target of punch is binder.
- BINDER_WRAP_FEATURE - Static variable in class nxopen.uf.UFDieeng.Opts
-
- binderEdgeOffset() - Method in interface nxopen.tooling.DieDesDrawDieBuilder
-
Returns the binder edge offset, which is used for define the binder edge offset value of the die.
- binderPosition() - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
Returns the distance value to move binder.
- binderProfiles() - Method in interface nxopen.tooling.DieDesignLowerBinderBuilder
-
Returns the binder profiles used to create Lower Binder
License requirements: ug_die_design ("Die Design")
.
- binderRegion() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the binder region which is a group of faces user chooses as holder.
- binderRelief() - Method in interface nxopen.tooling.DieDesignLowerBinderBuilder
-
Returns the binder relief
License requirements: ug_die_design ("Die Design")
.
- binderSheet() - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
Returns the binder sheet.
- BINOCULAR - Static variable in class nxopen.features.vehicledesign.CloseRangeVisibilityBuilder.EyePointTypes
-
Binocular type
- BINORMAL - Static variable in class nxopen.DatumConstraint.Solution
-
- BINORMAL - Static variable in class nxopen.features.DatumAxisBuilder.AlternateSolution
-
Datum axis at binormal to curve
- BINORMAL - Static variable in class nxopen.features.DatumAxisBuilder.CurveOrientations
-
Orientation at binormal to curve
- BINORMAL - Static variable in class nxopen.features.DatumPlaneBuilder.AlternateSolution
-
Datum plane at binormal to curve
- binormal - Variable in class nxopen.geometricanalysis.GeometricProperties.Edge
-
Curve Binormal in Root Part coordinates
- BINORMAL - Static variable in class nxopen.PlaneTypes.FrenetSubtype
-
Binormal to path, = FRENET_BINORMAL
- binormal - Variable in class nxopen.uf.UFEval.EvaluateUnitVectorsData
-
- binormalInWcs - Variable in class nxopen.geometricanalysis.GeometricProperties.Edge
-
Curve Binormal in Work Part coordinates
- bipNames - Variable in class nxopen.uf.UFRoute.AskBuiltInPathsData
-
- BISECT - Static variable in class nxopen.features.shipdesign.ProfileTransitionBuilder.MisalignedModeType
-
Extend/trim boundary end to bisector plane between target and boundary.
- bitmap() - Method in interface nxopen.blockstyler.BodyCollector
-
Returns the Bitmap
License requirements: None.
- bitmap() - Method in interface nxopen.blockstyler.Button
-
Returns the Bitmap
License requirements: None.
- bitmap() - Method in interface nxopen.blockstyler.CurveCollector
-
Returns the Bitmap
License requirements: None.
- bitmap() - Method in interface nxopen.blockstyler.DoubleBlock
-
Returns the Bitmap
License requirements: None.
- bitmap() - Method in interface nxopen.blockstyler.FaceCollector
-
Returns the Bitmap
License requirements: None.
- bitmap() - Method in interface nxopen.blockstyler.IntegerBlock
-
Returns the Bitmap
License requirements: None.
- bitmap() - Method in interface nxopen.blockstyler.Label
-
Returns the Bitmap
License requirements: None.
- bitmap() - Method in interface nxopen.blockstyler.SectionBuilder
-
Returns the Bitmap
License requirements: None.
- bitmap() - Method in interface nxopen.blockstyler.SelectElement
-
Returns the Bitmap
License requirements: None.
- bitmap() - Method in interface nxopen.blockstyler.SelectObject
-
Returns the Bitmap
License requirements: None.
- bitmap() - Method in interface nxopen.blockstyler.StringBlock
-
Returns the Bitmap
License requirements: None.
- bitmap() - Method in interface nxopen.blockstyler.SuperPoint
-
Returns the Bitmap
License requirements: None.
- bitmap() - Method in interface nxopen.blockstyler.SuperSection
-
Returns the Bitmap
License requirements: None.
- bitmap() - Method in interface nxopen.blockstyler.Toggle
-
Returns the Bitmap
License requirements: None.
- bitmap - Variable in class nxopen.uf.UFRoute.SystemInterface
-
- BitMap - Interface in nxopen.uistyler
-
Represents a Bit Map for UI Styler.
- BITMAP - Static variable in class nxopen.uistyler.Dialog.ItemType
-
- BITMAP - Static variable in class nxopen.uistyler.StylerItem.ItemType
-
Bitmap item
- bitmapName() - Method in interface nxopen.visualreporting.GroupLabel
-
- bitmapName() - Method in interface nxopen.visualreporting.Property
-
Returns the bitmap name of this property.
- bitmapName() - Method in interface nxopen.visualreporting.ResultCategory
-
- bitmapOnly() - Method in interface nxopen.blockstyler.Toggle
-
Returns the BitmapOnly
License requirements: None.
- BITS - Static variable in class nxopen.blockstyler.PropertyList.PropertyType
-
Bits
- BITS - Static variable in class nxopen.PropertyContainer.PropertyType
-
Bits
- BIW_DATUM_CUSTOMER1 - Static variable in class nxopen.weld.WeldFeatureSetType
-
Datum Customer1
- BIW_DATUM_CUSTOMER2 - Static variable in class nxopen.weld.WeldFeatureSetType
-
Datum Customer2
- BIW_DATUM_CUSTOMER3 - Static variable in class nxopen.weld.WeldFeatureSetType
-
Datum Customer3
- BIW_DATUM_PIN - Static variable in class nxopen.weld.WeldFeatureSetType
-
Datum Pin
- BIW_DATUM_SURFACE - Static variable in class nxopen.weld.WeldFeatureSetType
-
Datum Surface
- BIW_MEASUREMENT_CUSTOMER1 - Static variable in class nxopen.weld.WeldFeatureSetType
-
Measurement Customer1
- BIW_MEASUREMENT_CUSTOMER2 - Static variable in class nxopen.weld.WeldFeatureSetType
-
Measurement Customer2
- BIW_MEASUREMENT_CUSTOMER3 - Static variable in class nxopen.weld.WeldFeatureSetType
-
Measurement Customer3
- BIW_MEASUREMENT_HEM - Static variable in class nxopen.weld.WeldFeatureSetType
-
Measurement Hem
- BIW_MEASUREMENT_HOLE - Static variable in class nxopen.weld.WeldFeatureSetType
-
Measurement Hole
- BIW_MEASUREMENT_SLOT - Static variable in class nxopen.weld.WeldFeatureSetType
-
Measurement Slot
- BIW_MEASUREMENT_STUD - Static variable in class nxopen.weld.WeldFeatureSetType
-
Measurement Stud
- BIW_MEASUREMENT_SURFACE - Static variable in class nxopen.weld.WeldFeatureSetType
-
Measurement Surface
- BIW_MEASUREMENT_TRIM - Static variable in class nxopen.weld.WeldFeatureSetType
-
Measurement Trim
- BLACK - Static variable in class nxopen.display.TrueShadingBuilder.BgdType
-
Plain dark Colored background
- BLACK_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- BLACK_ON_WHITE - Static variable in class nxopen.CGMBuilder.Color
-
Black on White
- BLACK_ON_WHITE - Static variable in class nxopen.PlotColorsWidthsBuilder.Color
-
Black on White
- BLACK_ON_WHITE - Static variable in class nxopen.PrintPDFBuilder.Color
-
Black on White
- BLACK_ON_WHITE - Static variable in class nxopen.uf.UFCgm.Colors
-
- BLACK_ON_WHITE - Static variable in class nxopen.uf.UFPlot.Colors
-
- Blade - Interface in nxopen.cam
-
Represents a Blade Rough Drive Method Builder
This is an abstract superclass that has instantaible subclasses
.
- BLADE - Static variable in class nxopen.cam.BladeFinishGeom.Types
-
Blade
- BLADE - Static variable in class nxopen.cam.ToolAxisAdvanced.RotateAboutType
-
Blade
- Blade.MaterialSideType - Class in nxopen.cam
-
Available types for Flip Material, SDM: Select Cut Direction
- BLADE_FINISH - Static variable in class nxopen.cam.SurfaceContourBuilder.DriveMethodTypes
-
Blade Finish
- BLADE_ROUGH - Static variable in class nxopen.cam.SurfaceContourBuilder.DriveMethodTypes
-
Blade Rough
- BLADE_SWARF - Static variable in class nxopen.cam.ToolAxisAdvanced.Type
-
Blade Swarf
- bladeBlendColor() - Method in interface nxopen.cam.Preferences
-
Returns the blade blend color
License requirements: None.
- bladeBlendGeometry() - Method in interface nxopen.cam.GeometryCiBuilder
-
Returns the blade blend geometry
License requirements: cam_base ("CAM BASE")
.
- bladeColor() - Method in interface nxopen.cam.Preferences
-
Returns the blade color
License requirements: None.
- BladeCutLevels - Interface in nxopen.cam
-
Represents a Blade Cut Levels Builder
This is an abstract class and cannot be instantiated.
- BladeCutLevels.DepthModeTypes - Class in nxopen.cam
-
Available types for Depth Mode
- BladeCutLevels.DepthPerCutTypes - Class in nxopen.cam
-
Available types for Depth per Cut
- BladeCutLevels.HubExtensionsTypes - Class in nxopen.cam
-
Available types for Hub Extensions
- BladeCutLevels.IncompleteLevelsTypes - Class in nxopen.cam
-
Available types for Incomplete Levels
- BladeCutLevels.RangeDepthTypes - Class in nxopen.cam
-
Available types for Range Depth
- BladeCutStart - Interface in nxopen.cam
-
Represents a Blade Rough Drive Method Builder
This is an abstract superclass that has instantaible subclasses
.
- BladeCutStart.Type - Class in nxopen.cam
-
Available types for Starting Cut
- BladeEdge - Interface in nxopen.cam
-
Represents a BladeEdge Builder .
- BladeEdge.EdgeDefinitionType - Class in nxopen.cam
-
Available types for Edge Definition
- BladeEdge.EdgePointType - Class in nxopen.cam
-
Available types for Blade Edge Point
- bladeEdgePoint() - Method in interface nxopen.cam.BladeEdge
-
Returns the Blade Edge Point
License requirements: None.
- BladeFinish - Interface in nxopen.cam
-
Represents a Blade Finish Drive Method Builder .
- bladeFinish() - Method in interface nxopen.cam.SurfaceContourBuilder
-
Returns the Blade Finish Drive Method builder
License requirements: None.
- BladeFinishGeom - Interface in nxopen.cam
-
Represents BladeFinishGeom Builder .
- BladeFinishGeom.Types - Class in nxopen.cam
-
Available types for geometry to finish
- bladeGeometry() - Method in interface nxopen.cam.GeometryCiBuilder
-
Returns the blade geometry
License requirements: cam_base ("CAM BASE")
.
- BladeRough - Interface in nxopen.cam
-
Represents a Blade Rough Drive Method Builder .
- bladeRough() - Method in interface nxopen.cam.SurfaceContourBuilder
-
Returns the Blade Rough Drive Method builder
License requirements: None.
- BladeStartPoint - Interface in nxopen.cam
-
Represents BladeStartPoint Builder .
- BladeStartPoint.Types - Class in nxopen.cam
-
Available types for Blade Start Point .
- bladeStock() - Method in interface nxopen.cam.MillCutParameters
-
Returns the blade stock
License requirements: None.
- BLANK - Static variable in class nxopen.annotations.TabularNoteStyleBuilder.ShowLockedDeletedRowMethod
-
Blank
- BLANK - Static variable in class nxopen.cam.Preferences.GeometryTypes
-
blank
- blank() - Method in interface nxopen.cam.TurnBoundaryGeomBuilder
-
Returns the blank boundary
License requirements: None.
- BLANK - Static variable in class nxopen.DateItemBuilder.DayOfMonth
-
- BLANK - Static variable in class nxopen.DateItemBuilder.MonthOfYear
-
- BLANK - Static variable in class nxopen.die.AddendumSectionBuilder.SectionOrientationType
-
No orientation.
- BLANK - Static variable in class nxopen.die.AddendumSectionBuilder.SectionShapeType
-
No section shape.
- blank() - Method in interface nxopen.DisplayableObject
-
Blanks the object.
- BLANK - Static variable in class nxopen.drawings.DrawingRegionBuilder.RegionDraftingObjectType
-
- BLANK - Static variable in class nxopen.facet.FeatureExtractionBuilder.InputActions
-
Blank the input facet bodies
- BLANK - Static variable in class nxopen.features.StudioSplineBuilder.CurveOption
-
Deprecated.
Blank input curve
- BLANK - Static variable in class nxopen.geometricutilities.CurveOptions.InputCurve
-
Blanks the original input curve and creates the new output curve
- BLANK - Static variable in class nxopen.routing.DesignRuleViolation.BlankOption
-
- blank() - Method in interface nxopen.tooling.BlankLayoutBuilder
-
Returns the blank.
- blank() - Method in interface nxopen.tooling.ElectrodeBlankBuilder
-
Returns the blank to be edited.
- BLANK - Static variable in class nxopen.uf.UFCam.GeomType
-
- BLANK_BOUNDARY_SKETCH - Static variable in class nxopen.tooling.ScrapDesignBuilder.ScrapDefType
-
Boundary curves or sketch will be used to create scraps
- BLANK_CONTOUR_CONSTANT - Static variable in class nxopen.cam.StepoverBuilder.StepoverTypes
-
Depth and Number of levels
- BLANK_CONTOUR_Z - Static variable in class nxopen.cam.CutStrategy.Types
-
Cut strategy: Blank Contour Zig
- BLANK_GEOM_COLOR - Static variable in class nxopen.uf.UFCamPref.CamPref
-
- BLANK_GEOM_TYPE - Static variable in class nxopen.uf.UFCamPref.CamPref
-
- BLANK_NORMAL_DIFF_TAXIS - Static variable in class nxopen.cam.CAMObject.Attr
-
- BLANK_OUTLINE - Static variable in class nxopen.cam.CutParametersExtendFloorTypes
-
Blank Outline
- BLANK_PLANE - Static variable in class nxopen.cam.NcmHoleMachining.InitialTypes
-
blank plane
- BLANK_PLANE - Static variable in class nxopen.cam.NcmPlanarBuilder.InitialTypes
-
blank plane
- BLANK_PLANE - Static variable in class nxopen.cam.NcmPlanarBuilder.TransferBetweenRegionsTypes
-
Blank Plane
- BLANK_PLANE - Static variable in class nxopen.cam.NcmPlanarBuilder.TransferWithinLevelsTypes
-
Blank Plane
- BLANK_PLANE - Static variable in class nxopen.cam.NcmTransfer.TransferTypes
-
Blank Plane
- BLANK_TO_PART - Static variable in class nxopen.tooling.IntermediateStageBuilder.DesignSequences
-
design sequence from blank to part
- blankArea() - Method in interface nxopen.tooling.BlankNestingBuilder
-
Returns the up datum face area that was found in the processing.
- blankBody() - Method in interface nxopen.tooling.ValidCheckBuilder
-
Returns the blank body, to specify if blanked bodies in a component needs to be searched
License requirements: None.
- blankBoundary() - Method in interface nxopen.cam.FaceMillingBuilder
-
Returns the blank boundary
License requirements: None.
- blankBoundary() - Method in interface nxopen.cam.MillBoundaryGeomBuilder
-
Returns the blank boundary
License requirements: None.
- blankColor() - Method in interface nxopen.cam.Preferences
-
Returns the blank color
License requirements: None.
- blankComps() - Method in interface nxopen.tooling.EWDraftingBuilder
-
Returns the blank components used to create drafting.
- blankContourDepth() - Method in interface nxopen.cam.StepoverBuilder
-
Returns the Stepover Depth Builder
License requirements: None.
- blankContourNoLevels() - Method in interface nxopen.cam.StepoverBuilder
-
Returns the number of levels
License requirements: None.
- blankCurve() - Method in interface nxopen.tooling.DieDesDrawDieBuilder
-
Returns the blank curve, which is used for extrusion.
- blankCurve() - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
Returns the blank curve.
- blankDiameter() - Method in interface nxopen.cam.CylinderMillingBuilder
-
Returns the start location
License requirements: None.
- blankDistance() - Method in interface nxopen.cam.CylinderMillingBuilder
-
Returns the Wall Thickness
License requirements: None.
- blankDistance() - Method in interface nxopen.cam.MillCutParameters
-
Returns the blank distance
License requirements: None.
- blankDistance - Variable in class nxopen.uf.UFCambnd.AppData
-
- BLANKED - Static variable in class nxopen.annotations.PartsListBuilder.PartsListShowLockedDeletedRows
-
- blankGenerator() - Method in interface nxopen.tooling.ToolingManager
-
Returns the BlankGeneratorCollection instance belonging to this part .
- BlankGeneratorBuilder - Interface in nxopen.tooling
-
- BlankGeneratorBuilder.CreateBlankType - Class in nxopen.tooling
-
Specify the creation method.
- BlankGeneratorBuilder.EditBlankType - Class in nxopen.tooling
-
Specify the edit method.
- BlankGeneratorBuilder.Types - Class in nxopen.tooling
-
Specifies the option of blank generator operation type.
- BlankGeneratorCollection - Interface in nxopen.tooling
-
- blankGeomColor - Variable in class nxopen.uf.UFCam.Preferences
-
- blankGeometry() - Method in interface nxopen.cam.CavityMillingBuilder
-
Returns the blank geometry builder
License requirements: None.
- blankGeometry() - Method in interface nxopen.cam.MillGeomBuilder
-
Returns the blank geometry builder
License requirements: None.
- blankGeometry() - Method in interface nxopen.cam.PlungeMillingBuilder
-
Returns the blank geometry builder
License requirements: None.
- blankGeometry() - Method in interface nxopen.cam.VolumeBased25DMillingOperationBuilder
-
Returns the blank geometry builder
License requirements: None.
- blankGeomType - Variable in class nxopen.uf.UFCam.Preferences
-
- BLANKING - Static variable in class nxopen.tooling.ForceCalculationBuilder.ProcessTypes
-
blanking
- BlankIpw - Interface in nxopen.cam
-
Represents the blank ipw builder for blank definition
To obtain an instance of this class use the nxopen.cam.GeometryGroup
Created in NX8.0.0
- BlankIpw.SourceData - Class in nxopen.cam
-
- BlankIpw.StatusTypes - Class in nxopen.cam
-
the blank IPW status types
- blankLayout() - Method in interface nxopen.tooling.ToolingManager
-
Returns the BlankLayoutCollection instance belonging to this part .
- BlankLayoutBuilder - Interface in nxopen.tooling
-
- BlankLayoutBuilder.LeftRightSideOption - Class in nxopen.tooling
-
Specifies the option of left right side type.
- BlankLayoutBuilder.SideWebOption - Class in nxopen.tooling
-
Specifies the option of side webs type.
- BlankLayoutBuilder.SnapSizeOption - Class in nxopen.tooling
-
Specifies the option of snap size.
- BlankLayoutBuilder.Types - Class in nxopen.tooling
-
Specifies the option of blank layout type.
- BlankLayoutCollection - Interface in nxopen.tooling
-
- blankLocationObjectsOfViolation(DesignRuleViolation.BlankOption) - Method in interface nxopen.routing.DesignRuleViolation
-
This function will blank location objects of given violation.
- blankMatrix() - Method in interface nxopen.tooling.ElectrodeBlankBuilder
-
Returns the blank matrix.
- blankNameStr() - Method in interface nxopen.tooling.BlankLayoutBuilder
-
Returns the selected blank name.
- blankNesting() - Method in interface nxopen.tooling.ToolingManager
-
Returns the BlankNestingCollection instance belonging to this part .
- BlankNestingBuilder - Interface in nxopen.tooling
-
Blank Nesting Builder of PDW, EDW and Die Engineering.
- BlankNestingBuilder.LayoutTypeSpecification - Class in nxopen.tooling
-
Specifies the layout type of blank nesting.
- BlankNestingCollection - Interface in nxopen.tooling
-
- blankNumber() - Method in interface nxopen.tooling.BlankGeneratorBuilder
-
Returns the blank number.
- blankObjects(DisplayableObject[]) - Method in interface nxopen.DisplayManager
-
Blank a set of displayable objects.
- blankOffsetBuilder() - Method in interface nxopen.cam.FeatureGeomBuilder
-
Returns the blank offset (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- blankOption() - Method in interface nxopen.features.DividefaceBuilder
-
Returns the curve blanking option
License requirements: None.
- blankOptionType() - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
Returns the blank option.
- blankOriginal() - Method in interface nxopen.features.WaveLinkBuilder
-
Returns the blank original
License requirements: None.
- blankOverhang() - Method in interface nxopen.cam.MillCutParameters
-
Returns the blank overhang (inheritable tool dependent).
- blankPart() - Method in interface nxopen.tooling.BlankGeneratorBuilder
-
Returns the part containing a blank.
- blankPosition() - Method in interface nxopen.tooling.BendInsertDesignBuilder
-
Returns the blank position in punch plate or stripper plate.
- blankPosition() - Method in interface nxopen.tooling.FormingInsertBuilder
-
Returns the blank position in punch plate or stripper plate.
- blankPositionType() - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
Returns the blank position type.
- blankPositionValue() - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
Returns the distance value to move blank.
- blankProfile() - Method in interface nxopen.tooling.BurringInsertBuilder
-
Returns the blank profile to extrude the punch or die.
- blankProfile() - Method in interface nxopen.tooling.DieDesignLowerBinderBuilder
-
Returns the blank profile used to create Lower Binder
License requirements: ug_die_design ("Die Design")
.
- blankProfile() - Method in interface nxopen.tooling.FormingInsertBuilder
-
Returns the blank profile to extrude the punch or die.
- blankProfileOffset() - Method in interface nxopen.tooling.DieDesignLowerBinderBuilder
-
Returns the blank profile offset
License requirements: ug_die_design ("Die Design")
.
- blankSelection() - Method in interface nxopen.cam.Preferences
-
- blankSheet() - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
Returns the blank sheet.
- blankSize() - Method in interface nxopen.tooling.QuickQuotationBuilder
-
Returns the blank size.
- blankSpunOutline() - Method in interface nxopen.cam.GeometryCiBuilder
-
Returns the spun outline for blank
License requirements: cam_base ("CAM BASE")
.
- blankStatus - Variable in class nxopen.uf.UFModl.ParentDispInfo
-
- blankStatus - Variable in class nxopen.uf.UFObj.DispProps
-
- blankStock() - Method in interface nxopen.cam.MillCutParameters
-
Returns the blank stock
License requirements: None.
- blankStockAndGetLargestDia() - Method in interface nxopen.routing.SplinePathBuilder
-
Blanks all the stocks on the current segment and returns the stock with the largest diameter
License requirements: routing_base ("Routing Basic")
.
- blankThickness() - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
Returns the blank thickness.
- blankType() - Method in interface nxopen.cam.BoundaryTurnBlank
-
Returns the workpiece type
License requirements: None.
- blankType() - Method in interface nxopen.tooling.FormingInsertBuilder
-
Returns the blank type for punch or die.
- BLATZ - Static variable in class nxopen.PhysicalMaterial.Type
-
Blatz-Ko
- blBodySelection() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the body selection for boundary layer
License requirements: nx_masterfem ("Finite Element Modeling")
.
- blBodySelectionToggle() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the boundary layer body selection toggle
License requirements: nx_masterfem ("Finite Element Modeling")
.
- BLEND - Static variable in class nxopen.cam.IpwAnalysisBuilder.ColorControl
-
use sharp color control
- BLEND - Static variable in class nxopen.die.AddendumSectionBuilder.SectionShapeType
-
Section consists of a single radius type segment to define the blend shape.
- BLEND - Static variable in class nxopen.features.DeleteFaceBuilder.SelectTypes
-
This stands for delete blend type.
- blend() - Method in interface nxopen.features.EdgeSymmetryBuilder
-
Returns the value indicating constraint on the surface poles in the depth direction
License requirements: None.
- BLEND - Static variable in class nxopen.features.IFormBuilder.GlobalTransitionTypes
-
Blend type global transition
- BLEND - Static variable in class nxopen.features.LawExtensionBuilderEx.MiterOptions
-
Creates a three-sided patch between two faces
- blend() - Method in interface nxopen.features.MatchEdgeBuilder
-
Returns the blend
License requirements: None.
- BLEND - Static variable in class nxopen.features.StyledSweepBuilder.TransitionOptions
-
Blend
- BLEND - Static variable in class nxopen.features.SweptBuilder.InterpolationOptions
-
Blend
- BLEND - Static variable in class nxopen.geometricanalysis.DeviationGaugeBuilder.ColorPlotTypes
-
Blend
- BLEND - Static variable in class nxopen.tooling.WallThicknessCheckerBuilder.LegendControl
-
Blend
- blend1Continuity() - Method in interface nxopen.features.StyledBlendBuilder
-
Returns the first blend continuity
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- blend2Continuity() - Method in interface nxopen.features.StyledBlendBuilder
-
Returns the second blend continuity
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- BLEND_CENTERLINE - Static variable in class nxopen.features.VirtualCurveBuilder.Types
-
Blend centerline
- BLEND_FINISH - Static variable in class nxopen.cam.SurfaceContourBuilder.DriveMethodTypes
-
Blend Finish
- BLEND_FLANGE - Static variable in class nxopen.features.SilhouetteFlangeBuilder.OutputSurfaceOptions
-
Output blend and flange surfaces
- BLEND_GEOM - Static variable in class nxopen.uf.UFBrep.GeomType
-
- BLEND_THREE_FACE - Static variable in class nxopen.features.FaceBlendBuilder.DefiningType
-
this is form new three face blend
- BLEND_TWO_FACE - Static variable in class nxopen.features.FaceBlendBuilder.DefiningType
-
this is for normal two face blend
- blendCollector() - Method in interface nxopen.features.DeleteFaceBuilder
-
Returns the blend collector holding the blends to delete
License requirements: None.
- blendColor - Variable in class nxopen.preferences.PartVisualizationEmphasis.WireframeBlendOptions
-
the de-emphasis color that is blended with object colors
to de-emphasize wireframe geometry.
- BlendCorner - Interface in nxopen.features
-
Represents a blend corner feature
To create or edit an instance of this class, use
BlendCornerBuilder
Created in NX9.0.0
- BlendCornerBuilder - Interface in nxopen.features
-
- BlendCornerBuilder.ContinuityTypes - Class in nxopen.features
-
Continuity options
- BlendCurve3DBuilder - Interface in nxopen.tooling
-
Represents a
BlendCurve3DBuilder
builder which implements
blend curves in one side where the corner radius is too small.
- BlendCurve3DBuilder.BlendCurveOptions - Class in nxopen.tooling
-
The blend curve creation methods: Best Fit, Variable, Vector, Current View
- BlendCurve3DBuilder.InputCurvesOption - Class in nxopen.tooling
-
The input curves option to keep, hide or delete input curves
- blendCurveOption() - Method in interface nxopen.tooling.BlendCurve3DBuilder
-
Returns the blend curve option
License requirements: None.
- BLENDED_TOES - Static variable in class nxopen.annotations.SupplementarySymbol
-
Specifies blended toes supplementary weld symbol
- BLENDED_TOES_ISO_AND_DIN_ONLY - Static variable in class nxopen.annotations.LineWeldDataBuilder.ContourSymbolType
-
- BlendEdge() - Constructor for class nxopen.uf.UFModl.BlendEdge
-
- BlendEdge(Tag, Tag, int, String, String, UFModl.BlendPoint[]) - Constructor for class nxopen.uf.UFModl.BlendEdge
-
- blendFace() - Method in interface nxopen.features.OffsetRegionBuilder
-
Returns the face collector holding the all the recognized blend faces adjacent to faces to offset.
- blendFace() - Method in interface nxopen.features.ReplaceFaceBuilder
-
Returns the face collector holding the all the recognized blend faces adjacent to faces to replace.
- blendFace() - Method in interface nxopen.features.ResizeBlendBuilder
-
Returns the blend faces collector, don't use it until nx502
License requirements: None.
- blendFace() - Method in interface nxopen.features.ResizeFaceBuilder
-
Returns the face collector holding the all the recognized blend faces adjacent to faces to resize.
- blendFace() - Method in interface nxopen.features.VirtualCurveBuilder
-
Returns the blend face.
- blendFace1() - Method in interface nxopen.features.ReorderBlendsBuilder
-
Returns the blend face1
License requirements: None.
- blendFace2() - Method in interface nxopen.features.ReorderBlendsBuilder
-
Returns the blend face2
License requirements: None.
- blendFaceContinuity() - Method in interface nxopen.features.EdgeBlendBuilder
-
Returns the Blend Face Continuity option
License requirements: None.
- blendFaces() - Method in interface nxopen.features.MoveFaceBuilder
-
Returns the face collector holding the all the recognized blend faces adjacent to face to move.
- blendFaces() - Method in interface nxopen.tooling.UniversalUnformBuilder
-
Returns the blend faces
License requirements: None.
- blendFaces - Variable in class nxopen.uf.UFModl.StycornerData
-
- BlendFacesLimitData() - Constructor for class nxopen.uf.UFModl.BlendFacesLimitData
-
- BlendFacesLimitData(boolean, double[], boolean, double[], boolean, double[]) - Constructor for class nxopen.uf.UFModl.BlendFacesLimitData
-
- blendFacesOption() - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
Returns the blend faces option
License requirements: None.
- blendFactor() - Method in interface nxopen.facet.DetectPrimitivesBuilder
-
Returns the blend factor
License requirements: None.
- BlendFinish - Interface in nxopen.cam
-
Represents a Blend Finish Drive Method Builder .
- blendFinish() - Method in interface nxopen.cam.SurfaceContourBuilder
-
Returns the Blend Finish Drive Method builder
License requirements: None.
- BLENDING - Static variable in class nxopen.Face.FaceType
-
Blending face
- blendingFunctionType() - Method in interface nxopen.geometricutilities.ScalingMethodBuilder
-
Returns the blending function.
- blendInstanced - Variable in class nxopen.uf.UFModl.EdgeBlendData
-
- blendInstanced - Variable in class nxopen.uf.UFModl.EdgeBlendMultData
-
- BlendLimitsData - Interface in nxopen.geometricutilities
-
- blendMiter() - Method in interface nxopen.features.sheetmetal.ClosedCornerBuilder
-
Returns the option for smooth transition from miter to cutout edges.
- blendMiter() - Method in interface nxopen.features.sheetmetal.ThreeBendCornerBuilder
-
Returns the option for smooth transition from miter to cutout edges.
- blendMiterRadius() - Method in interface nxopen.features.sheetmetal.ThreeBendCornerBuilder
-
Returns the blend miter radius used for three bend corner miter treatment.
- blendOption() - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
Returns the method option
License requirements: None.
- blendOrder() - Method in interface nxopen.features.EdgeBlendBuilder
-
Returns the order of blending for edge blend
License requirements: None.
- blendPercentage - Variable in class nxopen.preferences.PartVisualizationEmphasis.WireframeBlendOptions
-
the percentage of the de-emphasis color that is blended
with object colors to de-emphasize wireframe geometry
It is a value between 10 and 100.
- BlendPocket - Interface in nxopen.features
-
Represents a blend pocket feature.
- BlendPocketBuilder - Interface in nxopen.features
-
Represents a
BlendPocket
builder for Blend Pocket feature.
- BlendPocketBuilder.AngledWallSolutions - Class in nxopen.features
-
Represents the solution which defines how the End Mill is positioned with the angled walls.
- BlendPocketBuilder.ToolTypes - Class in nxopen.features
-
Represents the tool type which defines how the angled walls are cut.
- BlendPoint() - Constructor for class nxopen.uf.UFModl.BlendPoint
-
- BlendPoint(String, double) - Constructor for class nxopen.uf.UFModl.BlendPoint
-
- BlendPointData() - Constructor for class nxopen.uf.UFModl.BlendPointData
-
- BlendPointData(String, double, Tag, int) - Constructor for class nxopen.uf.UFModl.BlendPointData
-
- blendRadius() - Method in interface nxopen.tooling.ElectrodeBlankBuilder
-
Returns the default blend radius of blended edges.
- blendRadius - Variable in class nxopen.uf.UFModl.EdgeBlendData
-
- BLENDS - Static variable in class nxopen.cam.NCAssistantBuilder.AnalysisTypes
-
Analysis Type: Blens
- BLENDS - Static variable in class nxopen.features.DraftBodyBuilder.RepairOption
-
Repair concave miter corners with blends
- blendSetback - Variable in class nxopen.uf.UFModl.EdgeBlendData
-
- BlendSetbackBuilder - Interface in nxopen.geometricutilities
-
This class provides ability to define a setback curve on a blend face.
- BlendSetbackBuilder.Directions - Class in nxopen.geometricutilities
-
Setback direction options
- BlendSetbackBuilderList - Interface in nxopen.geometricutilities
-
Represents a list of objects.
- blendStock() - Method in interface nxopen.cam.MillCutParameters
-
Returns the blend stock
License requirements: None.
- BlendStopshortBuilder - Interface in nxopen.geometricutilities
-
- blendStopshortBuilder() - Method in interface nxopen.Part
-
Returns the BlendStopshortBuilderCollection instance belonging to this part .
- BlendStopshortBuilder.Choices - Class in nxopen.geometricutilities
-
This enum represents the choice for stopshort option.
- BlendStopshortBuilderCollection - Interface in nxopen.geometricutilities
-
This class contains the factory methods for creating an BlendStopshortBuilder.
- blendType() - Method in interface nxopen.features.FaceBlendBuilder
-
Returns the type for face blend
License requirements: None.
- blendType - Variable in class nxopen.uf.UFModl.EdgeBlendData
-
- blendVirtualCurveOverlay() - Method in interface nxopen.blockstyler.BodyCollector
-
Returns the BlendVirtualCurveOverlay
License requirements: None.
- blendVirtualCurveOverlay() - Method in interface nxopen.blockstyler.CurveCollector
-
Returns the BlendVirtualCurveOverlay
License requirements: None.
- blendVirtualCurveOverlay() - Method in interface nxopen.blockstyler.FaceCollector
-
Returns the BlendVirtualCurveOverlay
License requirements: None.
- blendVirtualCurveOverlay() - Method in interface nxopen.blockstyler.SectionBuilder
-
Returns the BlendVirtualCurveOverlay
License requirements: None.
- blendVirtualCurveOverlay() - Method in interface nxopen.blockstyler.SelectObject
-
Returns the BlendVirtualCurveOverlay.
- blendVirtualCurveOverlay() - Method in interface nxopen.blockstyler.SuperPoint
-
Returns the BlendVirtualCurveOverlay.
- blendVirtualCurveOverlay() - Method in interface nxopen.blockstyler.SuperSection
-
Returns the BlendVirtualCurveOverlay.
- blendWidthMethod() - Method in interface nxopen.features.FaceBlendBuilder
-
Returns the width method for face blend
License requirements: solid_modeling ("SOLIDS MODELING")
.
- BLIND - Static variable in class nxopen.cam.HoleBossGeom.DepthLimitTypes
-
Deprecated.
Depth Limit: Blind
- BLIND - Static variable in class nxopen.cam.HoleBossSet.DepthLimitTypes
-
Depth Limit: Blind
- BLIND_HOLES - Static variable in class nxopen.tooling.FaceColorManagementBuilder.HoleTypeEnumValue
-
- blindHoles() - Method in interface nxopen.annotations.HoleTableSettingsHoleFiltersBuilder
-
Returns the blind holes
License requirements: None.
- blindHoleStockBuilder() - Method in interface nxopen.cam.HoleMakingBuilder
-
Returns the blind hole stock builder (inheritable double)
License requirements: None.
- Block - Interface in nxopen.features
-
Represents a block feature.
- BLOCK - Static variable in class nxopen.features.vehicledesign.WheelFixingBuilder.ShapeType
-
- BLOCK - Static variable in class nxopen.sim.IsvControlPanelBuilder.SingleStepType
-
Block
- BLOCK - Static variable in class nxopen.tooling.ElectrodeBlankBuilder.BlankShape
-
the shape of the blank is block
- BLOCK - Static variable in class nxopen.tooling.LayoutBuilder.XrefNum
-
Block type
- BLOCK - Static variable in class nxopen.tooling.LayoutBuilder.YrefNum
-
Block type
- BLOCK_CLINE - Static variable in class nxopen.uf.UFDrf.ValidClineForm
-
- BlockDialog - Interface in nxopen.blockstyler
-
Represents a Dialog .
- BlockDialog.Apply - Interface in nxopen.blockstyler
-
Apply callback
- BlockDialog.Cancel - Interface in nxopen.blockstyler
-
Cancel callback
- BlockDialog.Close - Interface in nxopen.blockstyler
-
Close callback
- BlockDialog.DialogMode - Class in nxopen.blockstyler
-
Datatype containing options for showing the dialog
- BlockDialog.DialogShown - Interface in nxopen.blockstyler
-
Dialog Shown callback
- BlockDialog.EnableOKButton - Interface in nxopen.blockstyler
-
Callback to enable OK and Apply buttons of the dialog.
- BlockDialog.Filter - Interface in nxopen.blockstyler
-
Filter callback
- BlockDialog.FocusNotify - Interface in nxopen.blockstyler
-
Focus notify callback.
- BlockDialog.Initialize - Interface in nxopen.blockstyler
-
Initialize callback
- BlockDialog.KeyboardFocusNotify - Interface in nxopen.blockstyler
-
Keyboard focus notify callback.
- BlockDialog.Ok - Interface in nxopen.blockstyler
-
Ok callback
- BlockDialog.Update - Interface in nxopen.blockstyler
-
Update callback
- BLOCKFONT - Static variable in class nxopen.drawings.BordersAndZonesBuilder.FontEnum
-
Deprecated.
- BLOCKFONT - Static variable in class nxopen.drawings.FontEnum
-
- blockOffset() - Method in interface nxopen.features.TabNoteCfgBuilder
-
Returns the block offset
License requirements: None.
- blockType() - Method in interface nxopen.tooling.WorkpieceBuilder
-
Returns the work piece shape type access functions
License requirements: None.
- blue - Variable in class nxopen.ColorDefinitionRgb
-
blue color value
- blue - Variable in class nxopen.DisplayManager.J3dColor
-
green color value
- blue - Variable in class nxopen.preferences.SessionVisualizationShade.Rgb
-
Deprecated.
- blue - Variable in class nxopen.uf.UFView.LightAttributes
-
- BLUE_BLUE_AZURE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- BLUE_BLUE_VIOLET_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- BLUE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- blueColor - Variable in class nxopen.preferences.ViewVisualizationSpecialEffects.ColorRGB
-
Blue in RGB pattern
- bluevalue - Variable in class nxopen.tooling.AssignPatchBuilder.PatchColorData
-
blue value between 0 and 1
- bluevalue - Variable in class nxopen.tooling.EdgePatchBuilder.BodyColorData
-
blue value between 0 and 1
- bluevalue - Variable in class nxopen.tooling.EnlargeSurfaceBuilder.ColorValueData
-
blue value between 0 and 1
- bluevalue - Variable in class nxopen.tooling.SpecifyBaffleBuilder.ChannelColorData
-
blue value between 0 and 1
- bluevalue - Variable in class nxopen.tooling.TrimRegionBuilder.ColorValueData
-
blue value between 0 and 1
- BMP - Static variable in class nxopen.gateway.ImageCaptureBuilder.ImageFormat
-
the bmp image format
- BMP - Static variable in class nxopen.uf.UFDisp.ImageFormat
-
- BND - Static variable in class nxopen.cam.CleanupOutput.GeomTypes
-
Boundaries
- BND_HAS_SLEEP_OBJ - Static variable in class nxopen.cam.CAMObject.Attr
-
- BND_NOT_PARALLEL_FLOOR - Static variable in class nxopen.cam.CAMObject.Attr
-
- BND_SPLINE_TANGENT - Static variable in class nxopen.cam.CAMObject.Attr
-
- bndAddPasses() - Method in interface nxopen.cam.DmBndBuilder
-
Returns the Additional Passes
License requirements: None.
- bndCustomStart() - Method in interface nxopen.cam.DmBndBuilder
-
Returns the Custom Start
License requirements: None.
- bndFaces - Variable in class nxopen.uf.UFSf.AskIdealizeRegionData
-
- bndPocketDir() - Method in interface nxopen.cam.DmBndBuilder
-
Returns the Pocketing Deriction
License requirements: None.
- bndProfilePass() - Method in interface nxopen.cam.DmBndBuilder
-
Returns the Profile Pass
License requirements: None.
- bndProfilePassStock() - Method in interface nxopen.cam.DmBndBuilder
-
Returns the Profile Pass Stock
License requirements: None.
- bndStepover() - Method in interface nxopen.cam.PlanarOperationBuilder
-
Returns the boundary stepover builder
License requirements: None.
- bNorm - Variable in class nxopen.uf.UFModlGeneral.AskCurvePropsData
-
- BODIES - Static variable in class nxopen.assemblies.ClearanceAnalysisBuilder.ClearanceBetweenEntity
-
- BODIES - Static variable in class nxopen.cae.ResultProbeBuilder.SelectionType
-
- BODIES - Static variable in class nxopen.cam.Preferences.AuxiliaryFloorColorSelectionTypes
-
Deprecated.
Bodies
- BODIES - Static variable in class nxopen.cam.Preferences.BlankSelectionTypes
-
Deprecated.
Bodies
- BODIES - Static variable in class nxopen.cam.Preferences.CheckSelectionTypes
-
Deprecated.
Bodies
- BODIES - Static variable in class nxopen.cam.Preferences.CutAreaSelectionTypes
-
Deprecated.
Bodies
- BODIES - Static variable in class nxopen.cam.Preferences.PartSelectionTypes
-
Deprecated.
Bodies
- BODIES - Static variable in class nxopen.cam.Preferences.WallSelectionTypes
-
Deprecated.
Bodies
- bodies() - Method in interface nxopen.cam.SurfaceRegions
-
Returns the bodies
License requirements: None.
- BODIES - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all bodies.
- bodies - Variable in class nxopen.FollowFilletRule.Data
-
Bodies whose edges are used to create this rule
- bodies() - Method in interface nxopen.Part
-
Returns the BodyCollection instance belonging to this part .
- BODIES - Static variable in class nxopen.preferences.PartVisualizationColorSetting.RandomColorDisplayFor
-
For Bodies
- bodies - Variable in class nxopen.uf.UFModl.LinkedExt
-
- bodiesReposition() - Method in interface nxopen.tooling.LayoutManagementBuilder
-
Returns the select bodies to reposition
License requirements: None.
- Body - Interface in nxopen
-
Represents a Body
.
- BODY - Static variable in class nxopen.cae.optimization.Geometry
-
Body
- BODY - Static variable in class nxopen.cae.PostGraphBuilder.EntityType
-
- BODY - Static variable in class nxopen.cam.SurfaceRegions.FeatureTypes
-
type to body
- BODY - Static variable in class nxopen.display.DynamicSectionTypes.CapColorOption
-
Use body color
- BODY - Static variable in class nxopen.display.DynamicSectionTypes.CurveColorOption
-
Use body color
- BODY - Static variable in class nxopen.display.SectionCurveSettingsBuilder.ColorOptionType
-
Use body color
- body - Variable in class nxopen.FaceAllBlendRule.DefiningData
-
Body which creates this rule
- BODY - Static variable in class nxopen.features.ExtractFaceBuilder.ExtractType
-
type to extract body
- body() - Method in interface nxopen.features.PromotionBuilder
-
Returns the body to be promoted
License requirements: None.
- body() - Method in interface nxopen.features.SectionEditBuilder
-
Returns the body which is cut by sectioning plane
License requirements: None.
- BODY - Static variable in class nxopen.features.sheetmetal.FlatSolidBuilder.TransformComponentsOption
-
transform components as bodies
- body() - Method in interface nxopen.features.ShellBuilder
-
Returns the body to be shelled.
- BODY - Static variable in class nxopen.features.shipdesign.ManufacturingStockBuilder.ObjectType
-
Body
- BODY - Static variable in class nxopen.preferences.SessionModeling.NewFacePropertiesInheritance
-
Indicates that display of new face properties inherits from body
- body() - Method in interface nxopen.RegionPoint
-
Returns the Body
License requirements: None.
- BODY - Static variable in class nxopen.shapesearch.ShapeSearchBuilder.SearchByType
-
search by bodies
- body() - Method in interface nxopen.tooling.EdgePatchBuilder
-
Returns the body to use to search for loops.
- BODY - Static variable in class nxopen.tooling.EdgePatchBuilder.SelectTypes
-
Body types
- BODY - Static variable in class nxopen.tooling.RemoveHolesBuilder.SelectionTypes
-
select body type
- BODY - Static variable in class nxopen.tooling.ValidCheckBuilder.SelMode
-
Selection type will be set to body
- BODY - Static variable in class nxopen.uf.UFConstants
-
- Body.FacetedBodyData - Class in nxopen
-
- BODY_ALREADY_REVERSED - Static variable in class nxopen.uf.UFConstants
-
- BODY_AS_BAFFLE - Static variable in class nxopen.tooling.SpecifyBaffleBuilder.AttributeTypes
-
Cooling baffle attributes assigned to the selected body.
- BODY_AS_CHANNEL - Static variable in class nxopen.tooling.SpecifyBaffleBuilder.AttributeTypes
-
Cooling channel attributes assigned to the selected body.
- BODY_BASED_TRIMMING - Static variable in class nxopen.features.MidSurfaceByFacePairsBuilder.TrimmingOptionType
-
Body based trimming
- BODY_COLLECTOR - Static variable in class nxopen.features.MatchedReferenceBuilder.Types
-
body collector
- BODY_COLLECTOR - Static variable in class nxopen.features.PartGeometryCopyBuilder.Type
-
An option to select bodies via body selection intent
- BODY_COLOR - Static variable in class nxopen.ModelingView.SectionCap
-
Deprecated.
enable using color of solid body
- BODY_COLOR - Static variable in class nxopen.preferences.PartVisualizationShade.ShadedFaceEdge
-
Body Color
- BODY_COLOR - Static variable in class nxopen.preferences.ViewVisualizationVisual.ShadedEdgeStyleType
-
- BODY_COLOR_AND_INTERFERENCE - Static variable in class nxopen.ModelingView.SectionCap
-
Deprecated.
with interference check
- BODY_CONSISTENCY - Static variable in class nxopen.geometricanalysis.ExamineGeometry.Check
-
BodyConsistency
- BODY_CURVE - Static variable in class nxopen.tooling.TrimRegionBuilder.BoundaryOption
-
select body/edge/curve as boundary object
- BODY_DATA_STRUCTURES - Static variable in class nxopen.geometricanalysis.ExamineGeometry.Check
-
BodyDataStructures
- BODY_DENSITY_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Body density property
- BODY_DUMB - Static variable in class nxopen.SelectionIntentRule.RuleType
-
- BODY_FACE_INTERSECTIONS - Static variable in class nxopen.geometricanalysis.ExamineGeometry.Check
-
BodyFaceIntersections
- BODY_FEATURE - Static variable in class nxopen.SelectionIntentRule.RuleType
-
- BODY_GROUP - Static variable in class nxopen.SelectionIntentRule.RuleType
-
- BODY_LINK - Static variable in class nxopen.features.WaveLinkBuilder.Types
-
- BODY_MASS_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Body mass property
- BODY_MUST_BE_SHEET - Static variable in class nxopen.uf.UFConstants
-
- BODY_OBJECT - Static variable in class nxopen.features.PartGeometryCopyBuilder.Type
-
An option to select body, body-based feature, and body group
- BODY_ONLY - Static variable in class nxopen.preferences.SubdivisionModelingPreferences.DisplayModes
-
Display body only
- BODY_RADIUS_GYRATION_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Body radius gyration property
- BODY_SHEET_BOUNDARIES - Static variable in class nxopen.geometricanalysis.ExamineGeometry.Check
-
BodySheetBoundaries
- BODY_SURFACE_AREA_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Body surface area property
- BODY_TYPE_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Body type property
- BODY_VOLUME_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Body volume property
- BODY_WEIGHT_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Body weight property
- bodyAskBoundingBox(Tag) - Method in interface nxopen.uf.UFSf
-
- bodyAskEdges(Tag) - Method in interface nxopen.uf.UFSf
-
- BodyAskEdgesData() - Constructor for class nxopen.uf.UFSf.BodyAskEdgesData
-
- bodyAskFaces(Tag) - Method in interface nxopen.uf.UFSf
-
- BodyAskFacesData() - Constructor for class nxopen.uf.UFSf.BodyAskFacesData
-
- bodyAskModlBody(Tag) - Method in interface nxopen.uf.UFSf
-
- bodyAskVolumeAndCentroid(Tag) - Method in interface nxopen.uf.UFSf
-
- BodyAskVolumeAndCentroidData() - Constructor for class nxopen.uf.UFSf.BodyAskVolumeAndCentroidData
-
- bodyBoundary() - Method in interface nxopen.features.shipdesign.PlateBuilder
-
Returns the body boundary, which can be mixed with curve, face and plane to define the plate boundary.
- BodyCollection - Interface in nxopen
-
Represents a collection of bodies in a part
To obtain an instance of this class, refer to
Part
Created in NX3.0.0
- BodyCollector - Interface in nxopen.blockstyler
-
Represents a Body Collector block .
- bodyCollector() - Method in interface nxopen.features.PartGeometryCopySelectBuilder
-
Returns the body collector
License requirements: None.
- bodyCollector() - Method in interface nxopen.MeasureBodyBuilder
-
Returns the body collector
License requirements: None.
- bodyColor() - Method in interface nxopen.tooling.EdgePatchBuilder
-
Returns the patch body color.
- bodyColor() - Method in interface nxopen.tooling.EnlargeSurfaceBuilder
-
Returns the color value of patch surface body.
- bodyColor() - Method in interface nxopen.tooling.TrimRegionBuilder
-
Returns the color value of patch surface body.
- BodyColorData() - Constructor for class nxopen.tooling.EdgePatchBuilder.BodyColorData
-
- BodyContact - Interface in nxopen.motion
-
- BodyContactAdams - Interface in nxopen.motion
-
- BodyContactAdams.CoulombFriction - Class in nxopen.motion
-
the enum for friction option of 3D contact
- BodyContactAdams.ForceModel - Class in nxopen.motion
-
the enum for forec model of 3D contact
- BodyContactBuilder - Interface in nxopen.motion
-
- BodyContactCollection - Interface in nxopen.motion
-
Represents a collection of 3D contact objects.Any contact object must
be created and found through this class
To obtain an instance of this class, refer to
MotionManager
Created in NX5.0.0
- BodyContactLms - Interface in nxopen.motion
-
- BodyContactLms.CoulombFriction - Class in nxopen.motion
-
the enum for friction option of 3D contact
- BodyContactRecurdyn - Interface in nxopen.motion
-
- BodyContactRecurdyn.ContactType - Class in nxopen.motion
-
the enum for contact type option of 3D contact
- BodyContactRecurdyn.CoulombFriction - Class in nxopen.motion
-
the enum for friction option of 3D contact
- BodyContactRecurdyn.ForceModel - Class in nxopen.motion
-
the enum for forec model of 3D contact
- BodyContactRecurdyn.SurfaceType - Class in nxopen.motion
-
the enum for surface type option of 3D contact
- bodyContacts() - Method in interface nxopen.motion.MotionManager
-
Returns the Motion.BodyContactCollection
belonging to this part
Created in NX3.0.0
- bodyDelete(Body) - Method in interface nxopen.cae.FemPart
-
- BodyDumbRule - Interface in nxopen
-
Represents a
SelectionIntentRule
that collects bodies without any intent i.e. as if collected with Single Body rule.
- BodyFeatureRule - Interface in nxopen
-
- BodyGroupRule - Interface in nxopen
-
- bodyId - Variable in class nxopen.uf.UFWeld.AskBodyIdData
-
- bodyIndex - Variable in class nxopen.uf.UFModl.IdentifyExteriorUsingHlData
-
- bodyIndex - Variable in class nxopen.uf.UFModl.IdentifyExteriorUsingRaysData
-
- BodyList - Interface in nxopen
-
Represents a list of objects.
- bodyObject() - Method in interface nxopen.features.PartGeometryCopySelectBuilder
-
Returns the body group
License requirements: None.
- bodyObjects() - Method in interface nxopen.MeasureBodyBuilder
-
Returns the body objects
License requirements: None.
- bodyOutputOption() - Method in interface nxopen.features.TrimAndExtendBuilder
-
Returns the body output type
License requirements: None.
- bodyParts() - Method in interface nxopen.features.HumanBuilder
-
Returns the manipulated body parts for dynamic drag
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- bodyPreference() - Method in interface nxopen.features.RuledBuilder
-
Returns the body type options
License requirements: features_modeling ("FEATURES MODELING") OR nx_freeform_1 ("basic freeform modeling")
.
- bodyPreference() - Method in interface nxopen.features.StudioSurfaceBuilder
-
Returns the body type options
License requirements: None.
- bodyPreference() - Method in interface nxopen.features.SweptBuilder
-
Returns the body type options
License requirements: None.
- bodyPreference() - Method in interface nxopen.features.ThroughCurveMeshBuilder
-
Returns the body type options
License requirements: None.
- bodyPreference() - Method in interface nxopen.features.ThroughCurvesBuilder
-
Returns the body type options
License requirements: None.
- bodyRecreateNew(Body) - Method in interface nxopen.cae.FemPart
-
RECREATE NEW on polygon body
License requirements: nx_masterfem ("Finite Element Modeling")
.
- bodyRecreateUpdate(Body) - Method in interface nxopen.cae.FemPart
-
RECREATE UPDATE on polygon body
License requirements: nx_masterfem ("Finite Element Modeling")
.
- bodyReverseDirection() - Method in interface nxopen.features.ExtractFaceBuilder
-
Returns the option to specify if the extracted faces should have the face normals reversed from the selected input bodies.
- bodyRules() - Method in interface nxopen.blockstyler.BodyCollector
-
Returns the BodyRules
License requirements: None.
- bodySelect() - Method in interface nxopen.cae.SuppressHoleBuilder
-
Returns the bodyselect
License requirements: nx_masterfem ("Finite Element Modeling")
.
- bodySelect() - Method in interface nxopen.features.LinkedFacetBuilder
-
Returns the body select
License requirements: None.
- bodySelect() - Method in interface nxopen.tooling.InitProjectBuilder
-
Returns the body will be used as product to create Mold Wizard project
License requirements: None.
- bodySelection() - Method in interface nxopen.cae.EdgeSticherBuilder
-
Returns the body selection for Auto-Stitch Edge
License requirements: None.
- bodySelection() - Method in interface nxopen.cae.NodeAssociationBuilder
-
Returns the selected body object
License requirements: None.
- bodySelection() - Method in interface nxopen.features.MidSurfaceByFacePairsBuilder
-
Returns the solid bodies for midsurface definition
License requirements: None.
- bodySelection() - Method in interface nxopen.tooling.RemoveHolesBuilder
-
Returns the body selection
License requirements: None.
- bodyTag - Variable in class nxopen.uf.UFSubdiv.Isocline
-
- bodytags - Variable in class nxopen.uf.UFPart.ImportXtHiddenData
-
- bodyToDelete() - Method in interface nxopen.features.DeleteBodyBuilder
-
Returns the collector of body to delete.
- bodyToExtract() - Method in interface nxopen.features.ExtractFaceBuilder
-
- bodyToKeep() - Method in interface nxopen.features.DeleteBodyBuilder
-
Returns the collector of body to keep.
- bodyToScale() - Method in interface nxopen.features.ScaleBuilder
-
Returns the bodyToScale
License requirements: None.
- bodyType() - Method in interface nxopen.facet.FacetedBody
-
Returns the type of the body
License requirements: None.
- bodyType() - Method in interface nxopen.geometricutilities.FeatureOptions
-
Returns the body type
License requirements: None.
- bodyType() - Method in interface nxopen.preferences.SessionModeling
-
Returns the body type.
- bodyType - Variable in class nxopen.uf.UFModlFeatures.AskCurveMesh1Data
-
- bodyType - Variable in class nxopen.uf.UFModlFeatures.AskCurveMeshData
-
- bodyType - Variable in class nxopen.uf.UFModlFeatures.AskRuled1Data
-
- bodyType - Variable in class nxopen.uf.UFModlFeatures.AskRuledData
-
- bodyType - Variable in class nxopen.uf.UFModlFeatures.AskSweepData
-
- bodyType - Variable in class nxopen.uf.UFModlFeatures.AskThruCurves1Data
-
- bodyType - Variable in class nxopen.uf.UFModlFeatures.AskThruCurvesData
-
- bodyTypePreference() - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
Returns the body preference type.
- bodyWidthExp() - Method in interface nxopen.features.vehicledesign.BaseDataBuilder
-
Returns the body width which is used for calculating the fields of vision according to US and CDN standards instead of vehicle width.
- bodyXform - Variable in class nxopen.uf.UFWave.AskLinkMirrorData
-
- bold - Variable in class nxopen.cae.Post.Text
-
- BOLD - Static variable in class nxopen.features.TextBuilder.FontStyleOptions
-
Bold style
- BOLD - Static variable in class nxopen.preferences.VisualizationFonts.StyleType
-
Bold font style
- BOLD_ITALIC - Static variable in class nxopen.features.TextBuilder.FontStyleOptions
-
Bold italic style
- BOLD_ITALIC - Static variable in class nxopen.preferences.VisualizationFonts.StyleType
-
Bold-italic or bold-oblique font style
- Bolt - Interface in nxopen.cae
-
Represents Bolt
To create or edit an instance of this class, use
BoltBuilder
Created in NX7.5.0
- BOLT - Static variable in class nxopen.routing.ReuseLibrary.PartType
-
Bolt Post Placement Type
- bolt - Variable in class nxopen.routing.ReuseLibrary.SpecificationsGetConnectionPostPlacementData
-
Whether or not to place Bolts for this connection.
- bolt - Variable in class nxopen.routing.ReuseLibrary.SpecificationsGetReportInBomData
-
Report Bolts
- BOLT_NUT - Static variable in class nxopen.cae.BoltBuilder.BoltOperation
-
Creates a bolt connection with nut
- BOLT_TAP - Static variable in class nxopen.cae.BoltBuilder.BoltOperation
-
Creates a bolt connection in a tapped hole
- BoltBuilder - Interface in nxopen.cae
-
- BoltBuilder.BoltOperation - Class in nxopen.cae
-
Represents the options for type of operation
- BoltBuilder.Selection - Class in nxopen.cae
-
Represents the options for entity selection
- BoltBuilder.SpiderDiameter - Class in nxopen.cae
-
Represents the options for spider diameter
- BoltCircleCenterline - Interface in nxopen.annotations
-
Represents a BoltCircleCenterline centerline
To create or edit an instance of this class, use
BoltCircleCenterlineBuilder
Created in NX6.0.0
- BoltCircleCenterlineBuilder - Interface in nxopen.annotations
-
- BoltCollection - Interface in nxopen.cae
-
Provides method for creating builder for
bolt operation commands in a fem/afem part
To obtain an instance of this class, refer to
BaseFEModel
Created in NX6.0.0
- boltHoleParent() - Method in interface nxopen.die.DrawDiePunchBuilder
-
Returns the bolt hole parent builder of the draw die punch.
- boltHoleParent() - Method in interface nxopen.die.RotorBuilder
-
Returns the bolt holes parent builder of the rotor.
- boltHoleParent() - Method in interface nxopen.die.SteelInsertBuilder
-
Returns the bolt hole parent builder of the diesteelinsert
License requirements: ug_die_design ("Die Design")
.
- boltLength() - Method in interface nxopen.cae.BoltBuilder
-
Returns the bolt length
License requirements: None.
- bolts() - Method in interface nxopen.cae.BaseFEModel
-
Returns the connection collector manager belonging to the part .
- BOM - Static variable in class nxopen.tooling.BomBuilder.TreeList
-
A list includes components in BOM
- BOM_LIST - Static variable in class nxopen.tooling.BomListBuilder.BomListTypes
-
A list includes components in BOM
- BomBuilder - Interface in nxopen.tooling
-
- BomBuilder.Circle - Class in nxopen.tooling
-
Represents an index to the base circle type of cylinder shape.
- BomBuilder.Shape - Class in nxopen.tooling
-
Represents an index to the shape of stock size.
- BomBuilder.TreeList - Class in nxopen.tooling
-
Represents an index to components list type.
- BomCollection - Interface in nxopen.tooling
-
Represents a collection of Bom
To obtain an instance of this class, refer to
ToolingManager
Created in NX6.0.0
- bomDetailLevelFlag() - Method in interface nxopen.preferences.RoutingPart
-
Returns the detail level for the Routing bill of material.
- bomFormatPart() - Method in interface nxopen.preferences.RoutingPart
-
Returns the name of the template Routing bill of material part file.
- BomListBuilder - Interface in nxopen.tooling
-
- BomListBuilder.BomListTypes - Class in nxopen.tooling
-
Represents an index to components list type.
- bomListType() - Method in interface nxopen.tooling.BomListBuilder
-
Returns the tree list shows which kind of components should be included in
License requirements: None.
- boms() - Method in interface nxopen.tooling.ToolingManager
-
Returns the BomCollection instance belonging to this part .
- bomTemplate() - Method in interface nxopen.tooling.BomListBuilder
-
Returns the template file of bom
License requirements: None.
- BOND - Static variable in class nxopen.positioning.Constraint.Type
-
A number of movable objects form a rigid group
- BOND_FAILURE_INDEX - Static variable in class nxopen.cae.Result.Quantity
-
- BOND_SAFETY_MARGIN - Static variable in class nxopen.cae.Result.Quantity
-
- BOND_STRAIN - Static variable in class nxopen.cae.Result.Quantity
-
- BOND_STRENGTH_RATIO - Static variable in class nxopen.cae.Result.Quantity
-
- BOND_STRESS - Static variable in class nxopen.cae.Result.Quantity
-
- bonnetTop() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the collector containing the faces of the bonnet.
- bonnetTopNotMirrored() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the collector containing the faces of the bonnet that are not to be mirrored.
- BOOKMARK - Static variable in class nxopen.issue.IssueAttachment.Type
-
Bookmark type
- BOOKMARK_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- BOOKMARK_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- BOOKMARK_OPEN_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- BOOKMARK_SAVE_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- BookmarkComponentsToLoadData() - Constructor for class nxopen.LoadOptions.BookmarkComponentsToLoadData
-
- BookmarkFile - Interface in nxopen.gateway
-
Represents operations which can be done on bookmark files.
- bookmarkFile() - Method in interface nxopen.Session
-
Returns the
BookmarkFile
belonging to this session
Created in NX10.0.0
- bookmarkRefsetLoadBehavior() - Method in interface nxopen.LoadOptions
-
Returns the options that specify import and loading of components' reference sets when opening bookmarks.
- BOOL - Static variable in class nxopen.cam.CAMAttribute.ValueType
-
- BOOL - Static variable in class nxopen.mechatronics.ParameterStockBuilder.DataType
-
Bool
- BOOL - Static variable in class nxopen.mechatronics.ProxyOverrideObjectBuilder.AttrType
-
- BOOL - Static variable in class nxopen.mechatronics.SignalAdapterBuilder.DataType
-
bool
- BOOL - Static variable in class nxopen.pdm.PdmSoaqueryNxmgrfielddatatype
-
Boolean
- BOOLEAN - Static variable in class nxopen.AttributePropertiesBaseBuilder.DataTypeOptions
-
Boolean, the value will be true or false
- BOOLEAN - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.VarTypes
-
Specifies a boolean variable
- BOOLEAN - Static variable in class nxopen.issue.IssueProperty.Type
-
Boolean type
- BOOLEAN - Static variable in class nxopen.mechatronics.ExternalConnectionElementBuilder.DataType
-
boolean
- BOOLEAN - Static variable in class nxopen.mechatronics.OPCClientBuilder.TagDataType
-
boolean type
- BOOLEAN - Static variable in class nxopen.NXObject.AttributeType
-
Boolean
- BOOLEAN - Static variable in class nxopen.RuleManager.RuleType
-
- BOOLEAN - Static variable in class nxopen.sim.SimDebugBuilder.PrintoutTagsOrPointersType
-
Boolean
- BOOLEAN - Static variable in class nxopen.uf.UFKf.Type
-
- BOOLEAN - Static variable in class nxopen.validate.RequirementBuilder.DataTypeOptions
-
- BOOLEAN - Static variable in class nxopen.visualreporting.Property.DatatypeOption
-
Boolean datatype
- BooleanBuilder - Interface in nxopen.features
-
Represents a boolean feature builder.
- booleanData() - Method in interface nxopen.features.SweptVolumeBuilder
-
Returns the boolean data
License requirements: None.
- booleanFaceProperties() - Method in interface nxopen.preferences.SessionModeling
-
Returns the boolean face properties inheritance.
- booleanOperation() - Method in interface nxopen.features.ExtrudeBuilder
-
Returns the extrude boolean operation
License requirements: None.
- booleanOperation() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the boolean operation
License requirements: None.
- booleanOperation() - Method in interface nxopen.features.RevolveBuilder
-
Returns the revolve boolean
License requirements: None.
- booleanOperation() - Method in interface nxopen.features.SweepAlongGuideBuilder
-
Returns the boolean operation
License requirements: None.
- booleanOperation() - Method in interface nxopen.features.ThickenBuilder
-
Returns the boolean operation.
- booleanOperation() - Method in interface nxopen.features.VarsweepBuilder
-
Returns the boolean option
License requirements: None.
- BooleanOperation - Interface in nxopen.geometricutilities
-
Represents a boolean operation .
- booleanOperation() - Method in interface nxopen.geometricutilities.EndHoleData
-
Returns the boolean operation
License requirements: None.
- booleanOperation() - Method in interface nxopen.geometricutilities.MiddleHoleData
-
Returns the boolean operation
License requirements: None.
- booleanOperation() - Method in interface nxopen.geometricutilities.StartHoleData
-
Returns the boolean operation
License requirements: None.
- booleanOperation() - Method in interface nxopen.tooling.RunnerBuilder
-
Returns the boolean operation to perform on the runner.
- BooleanOperation.BooleanOperationAndBodyData - Class in nxopen.geometricutilities
-
- BooleanOperation.BooleanType - Class in nxopen.geometricutilities
-
Boolean operation type.
- BooleanOperationAndBodyData() - Constructor for class nxopen.geometricutilities.BooleanOperation.BooleanOperationAndBodyData
-
- booleanOption() - Method in interface nxopen.features.ConeBuilder
-
Returns the boolean option
License requirements: None.
- booleanOption() - Method in interface nxopen.features.CylinderBuilder
-
Returns the boolean option
License requirements: None.
- booleanOption() - Method in interface nxopen.features.SphereBuilder
-
Returns the boolean operation associated with the Sphere.
- booleanOption() - Method in interface nxopen.features.TubeBuilder
-
Returns the boolean option
License requirements: None.
- booleanOptions() - Method in interface nxopen.die.DieBooleanBuilder
-
Returns the boolean option to apply to the list of selected solids
License requirements: None.
- booleanRegionSelect() - Method in interface nxopen.features.BooleanBuilder
-
Returns the boolean region select object
License requirements: solid_modeling ("SOLIDS MODELING")
.
- BooleanRegionSelect - Interface in nxopen.geometricutilities
-
a class which defines boolean region select.
- BooleanRegionSelect.KeepRemoveOption - Class in nxopen.geometricutilities
-
the keep/remove options for selected region
- BooleanRegionSelect.SelectOption - Class in nxopen.geometricutilities
-
the region selection method
- booleanTool() - Method in interface nxopen.features.SplitBodyBuilder
-
Returns the tool bodies to split the target body(s).
- booleanTool() - Method in interface nxopen.features.TrimBody2Builder
-
Returns the tool bodies to trim the target body(s).
- BooleanToolBuilder - Interface in nxopen.geometricutilities
-
a class which defines boolean tool builder.
- BooleanToolBuilder.BooleanToolType - Class in nxopen.geometricutilities
-
the boolean tool created options
- booleanUdf(Tag, Tag, Tag, double[], int, Tag[], int, Tag[], boolean) - Method in interface nxopen.uf.UFModlGeneral
-
- booleanUdf1(Tag, Tag, Tag, double[], int, Tag[], int, Tag[], boolean, Tag, boolean) - Method in interface nxopen.uf.UFModlGeneral
-
- booleanValue() - Method in interface nxopen.AttributePropertiesBaseBuilder
-
Returns the boolean value.
- booleanValue() - Method in interface nxopen.cam.UdeParameter
-
Returns the boolean value of the parameter
License requirements: None.
- booleanValue() - Method in interface nxopen.Expression
-
Returns the boolean value of the expression.
- booleanValue - Variable in class nxopen.NXObject.AttributeInformation
-
Boolean (logical) attribute value (the default value is returned when reading templates of non-set attributes)
- BoolParameterData() - Constructor for class nxopen.mechatronics.ParameterStockBuilder.BoolParameterData
-
- boolValue() - Method in interface nxopen.mechatronics.ProxyObjectParameterBuilder
-
Returns the bool value of parameter attribute in proxy object
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- boolValue - Variable in class nxopen.mechatronics.SignalAdapterBuilder.SignalData
-
Data Value (bool)
- border() - Method in interface nxopen.cae.optimization.TBSSmoothBuilder
-
Returns the option to save border.
- BORDER - Static variable in class nxopen.drawings.ViewWorkflowBuilder.Style
-
- BORDER - Static variable in class nxopen.preferences.PartDrafting.ViewStyleType
-
Border
- BORDER_GRID - Static variable in class nxopen.cae.xyplot.ContouringRange
-
Option to show contour range on the border of the grid
- borderAndZoneStandard() - Method in interface nxopen.drawings.BorderAndZoneStyleBuilder
-
Returns the borders and zones standard
License requirements: None.
- borderAndZoneStyle() - Method in interface nxopen.drafting.PreferencesBuilder
-
Returns the border and zone style builder
License requirements: None.
- borderAndZoneStyle() - Method in interface nxopen.drawings.BordersAndZonesBuilder
-
Returns the border and zone style builder
License requirements: None.
- BorderAndZoneStyleBuilder - Interface in nxopen.drawings
-
Represents the Border and Zone Style Builder which manages all the style attributes related
to sheet borders, sheet margins and sheet zones.
- borderColor() - Method in interface nxopen.annotations.TableCellStyleBuilder
-
Returns the border color
License requirements: None.
- borderColor() - Method in interface nxopen.drawings.ViewWorkflowBuilder
-
Returns the border color of view
License requirements: None.
- borderColor() - Method in interface nxopen.preferences.PartDrafting
-
Returns the drafting view border color.
- BorderContinuity() - Constructor for class nxopen.features.FillHoleBuilder.BorderContinuity
-
- BorderContinuity(NXObject, FillHoleBuilder.ContinuityTypes) - Constructor for class nxopen.features.FillHoleBuilder.BorderContinuity
-
Constructor for the BorderContinuity object.
- borderFont() - Method in interface nxopen.annotations.TableCellStyleBuilder
-
Returns the border font
License requirements: None.
- borderLineWidth() - Method in interface nxopen.drawings.SheetBorderSettingsBuilder
-
Returns the border line width
License requirements: None.
- borderLocation() - Method in interface nxopen.annotations.TableCellStyleBuilder
-
Returns the border location
License requirements: None.
- borderObject - Variable in class nxopen.features.FillHoleBuilder.BorderContinuity
-
Border object
- borderOffset() - Method in interface nxopen.annotations.TableSectionStyleBuilder
-
Returns the border offset value
License requirements: None.
- BordersAndZones - Interface in nxopen.drawings
-
Represents Borders and Zones
To create or edit an instance of this class, use
BordersAndZonesBuilder
Created in NX8.0.0
- BordersAndZonesBuilder - Interface in nxopen.drawings
-
Builder for creating Borders and Zones.
- BordersAndZonesBuilder.FontEnum - Class in nxopen.drawings
-
- BordersAndZonesBuilder.HorizontalCenteringMarkType - Class in nxopen.drawings
-
- BordersAndZonesBuilder.VerticalCenteringMarkType - Class in nxopen.drawings
-
- BordersAndZonesBuilder.ZoneMethod - Class in nxopen.drawings
-
- BordersAndZonesBuilder.ZoneOrigin - Class in nxopen.drawings
-
- BordersAndZonesCollection - Interface in nxopen.drawings
-
Represents a collection of
BordersAndZones
objects
To obtain an instance of this class, refer to
nxopen.draftingManager
Created in NX8.0.0
- bordersAndZonesObjects() - Method in interface nxopen.DraftingManager
-
Borders and Zones Collection .
- borderSw - Variable in class nxopen.uf.UFSfLegend.Attr
-
- borderToArrowDistance() - Method in interface nxopen.drawings.SectionLineStyleBuilder
-
- borderToArrowDistance() - Method in interface nxopen.drawings.ViewSectionLineBuilder
-
Returns the border to arrow distance
License requirements: None.
- borderType - Variable in class nxopen.uf.UFDraw.TabnotParams
-
- borderVisibility() - Method in interface nxopen.blockstyler.Enumeration
-
Returns the BorderVisibility
License requirements: None.
- borderWidth() - Method in interface nxopen.annotations.TableCellStyleBuilder
-
Returns the border width
License requirements: None.
- borderWidth - Variable in class nxopen.uf.UFDraw.TabnotParams
-
- borderWidth - Variable in class nxopen.uf.UFTabnot.SectionPrefs
-
- BORE - Static variable in class nxopen.cam.CenterlineDrillTurningBuilder.CycleTypes
-
Cycle: Bore
- BORE - Static variable in class nxopen.cam.ProbeInspectBorebossMoveBuilder.Cycle
-
Bore
- BOSS - Static variable in class nxopen.cam.HoleBossGeom.HoleBossTypes
-
Type: Boss
- BOSS - Static variable in class nxopen.cam.ProbeInspectBorebossMoveBuilder.Cycle
-
Boss
- BOSS - Static variable in class nxopen.weld.WeldJointBuilder.WeldTypes
-
Boss joint for pipe welding.
- bossColorFontWidth() - Method in interface nxopen.weld.WeldJointBuilder
-
Returns the color, font, and width of the boss joint curves.
- bossDimension() - Method in interface nxopen.cam.ProbeInspectBorebossMoveBuilder
-
Returns the radial clearance from nominal target surface
License requirements: None.
- bossList() - Method in interface nxopen.cam.HoleBossGeom
-
Returns the boss list
License requirements: None.
- BOTH - Static variable in class nxopen.annotations.BaseSurfaceFinishBuilder.ParanthesesType
-
Deprecated.
Both
- BOTH - Static variable in class nxopen.annotations.BaseSurfaceFinishBuilder.ParenthesesType
-
Both
- BOTH - Static variable in class nxopen.assemblies.ComponentAssembly.CheckinCheckoutOption
-
Checks in or Checks out the design element and its referenced source item
- BOTH - Static variable in class nxopen.assemblies.RelinkerBuilder.LinkOption
-
Indicate relink option is both interpart expression and wave link
- BOTH - Static variable in class nxopen.cae.AssignNodalCSBuilder.Cs
-
reference and displacement
- BOTH - Static variable in class nxopen.cae.EdgeSticherBuilder.StitchOptions
-
- BOTH - Static variable in class nxopen.cae.MeshControlBuilder.WeldSide
-
- BOTH - Static variable in class nxopen.cae.optimization.TBSSmoothBuilder.IsoType
-
Saves the complete surface
- BOTH - Static variable in class nxopen.cae.optimization.TBSTopologyControllerOptimizationParameters.AutoFrozen
-
All loaded elements, elements with load nodes with boundary conditions are excluded from the optimization
- BOTH - Static variable in class nxopen.cae.Post.ClipSide
-
- BOTH - Static variable in class nxopen.cae.Post.StreamlineDirection
-
- BOTH - Static variable in class nxopen.cae.responsesimulation.DataLocation.Element
-
- BOTH - Static variable in class nxopen.cae.responsesimulation.ElementLocation
-
- BOTH - Static variable in class nxopen.cae.xyplot.Preference.TargetGraphicWindowOption
-
Shows plot graph on either main graphic window or a separate graphic window
- BOTH - Static variable in class nxopen.cam.SurfaceContourBuilder.CleanupTypes
-
- BOTH - Static variable in class nxopen.die.OutputCurvesBuilder.TrimOutputCurveTypes
-
Both geometric and corrected.
- BOTH - Static variable in class nxopen.die.PierceTaskBuilder.CenterPointOptionTypes
-
Center points output in both die and product position
- BOTH - Static variable in class nxopen.die.TrimLineDevelopmentBuilder.OutputMethodName
-
Both geometric and corrected curves
- BOTH - Static variable in class nxopen.die.WearPlateLocChildBuilder.PositionType
-
Position locator on both sides of the wear plate.
- BOTH - Static variable in class nxopen.die.WearPlateLocParentBuilder.PositionType
-
Position locator on both sides of the wear plate.
- BOTH - Static variable in class nxopen.features.DraftBodyBuilder.RepairOption
-
Repair concave miter corners with both blends and planes
- BOTH - Static variable in class nxopen.features.sheetmetal.BendTaperBuilder.BendTaperSides
-
Both Sides
- BOTH - Static variable in class nxopen.features.sheetmetal.MiterOptions.PositionOptions
-
miter is done both at beginning and ending
- BOTH - Static variable in class nxopen.features.ThroughCurveMeshBuilder.EmphasisType
-
Emphasis on both primary and cross strings.
- BOTH - Static variable in class nxopen.features.vehicledesign.CloseRangeVisibilityBuilder.PathPositionTypes
-
Both top and bottom
- BOTH - Static variable in class nxopen.features.vehicledesign.CrashBarrierBuilder.SidePositionType
-
- BOTH - Static variable in class nxopen.features.vehicledesign.DynamicCurbBuilder.PositionType
-
- BOTH - Static variable in class nxopen.features.vehicledesign.GroundClearanceBuilder.PositionType
-
- BOTH - Static variable in class nxopen.features.vehicledesign.SlopeBuilder.PositionType
-
- BOTH - Static variable in class nxopen.features.vehicledesign.StaticCurbBuilder.PositionType
-
Both
- BOTH - Static variable in class nxopen.features.vehicledesign.WheelCoveringBuilder.PositionType
-
Creates checking surface for both front and rear wheels
- BOTH - Static variable in class nxopen.features.vehicledesign.WheelFixingBuilder.PositionType
-
- BOTH - Static variable in class nxopen.geometricanalysis.DraftAnalysisBuilder.SelectOutput
-
analysis object and isoclines;
- BOTH - Static variable in class nxopen.geometricanalysis.GapFlushnessBuilder.DisplayOptions
-
both
- BOTH - Static variable in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder.OutputType
-
Both Analysis Object and section curves
- BOTH - Static variable in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder.OutputType
-
Both Analysis Object and section curves
- BOTH - Static variable in class nxopen.HumanHandShapeData.HandOpt
-
- BOTH - Static variable in class nxopen.MeshProfileString.SelectedPoint
-
- BOTH - Static variable in class nxopen.RuleManager.Filter
-
Both user and system classes
- BOTH - Static variable in class nxopen.tooling.CornerDesignBuilder.SelectFromOpt
-
both part body and pocket body
- BOTH - Static variable in class nxopen.tooling.DieEngStampingOutputBuilder.DisplayProductType
-
- BOTH - Static variable in class nxopen.tooling.DieEngTrimTaskBuilder.TrimTaskMatchCutType
-
- BOTH - Static variable in class nxopen.tooling.MWCopySheetsBuilder.Types
-
Sheet type - Both parting and patched sheets
- BOTH - Static variable in class nxopen.tooling.PocketBuilder.RsetType
-
both
- BOTH - Static variable in class nxopen.tooling.RunnerBuilder.GuideEndType
-
Use both start and end points.
- BOTH - Static variable in class nxopen.tooling.ValidCheckBuilder.CheckingType
-
Both types of body will be used to do checking
- BOTH - Static variable in class nxopen.weld.WeldFeatureOutput
-
Output both curves and solids
- BOTH_J383AND_J1369 - Static variable in class nxopen.features.vehicledesign.SeatBeltAnchorageBuilder.StandardTypes
-
both
- BOTH_LOADED - Static variable in class nxopen.RuleManager.Filter
-
System and user classes that are loaded
- BOTH_SETS - Static variable in class nxopen.motion.PackagingInterferenceBuilder.Frame
-
Interference solids positioned relative to
interfering links in both sets.
- BOTH_SHEETS - Static variable in class nxopen.assemblies.ClearanceSet.PenetrationDepthResult
-
- BOTH_SHOW_AND_HIDE - Static variable in class nxopen.View.ShowOrHideType
-
- BOTH_SIDES - Static variable in class nxopen.die.UncutRegionsBuilder.ResultsType
-
Find uncut regions on both sides of curve
- BOTH_SIDES - Static variable in class nxopen.features.vehicledesign.HeadImpactBuilder.CalculationType
-
- BOTH_XY - Static variable in class nxopen.features.ProjectCurveBuilder.ArcLengthType
-
Represents Both X and Y
- BOTTOM - Static variable in class nxopen.annotations.DraftingNoteBuilder.TextAlign
-
Align bottom
- BOTTOM - Static variable in class nxopen.annotations.IdentificationLineLocation
-
Specifies identification line below the
reference line
- BOTTOM - Static variable in class nxopen.annotations.LeaderAlignment
-
- BOTTOM - Static variable in class nxopen.annotations.LeaderVerticalAttachment
-
Attach vertically to the bottom of the annotation
- BOTTOM - Static variable in class nxopen.annotations.PartsListBuilder.PartsListVerticalGroupLeaderAttachment
-
- BOTTOM - Static variable in class nxopen.annotations.StackHorizontalAlignment
-
Align horizontally along bottom edge of text box
- BOTTOM - Static variable in class nxopen.annotations.TableCellStyleBuilder.BorderLocationType
-
- BOTTOM - Static variable in class nxopen.annotations.VerticalTextJustification
-
- BOTTOM - Static variable in class nxopen.cae.DurabilityStressAxesBuilder.ShellRegionEnum
-
Bottom
- BOTTOM - Static variable in class nxopen.cae.optimization.Hookes
-
Deprecated.
Bottom
- BOTTOM - Static variable in class nxopen.cae.optimization.TBSLoadCase.LayerOption
-
Bottom layer of shell
- BOTTOM - Static variable in class nxopen.cae.responsesimulation.DataLocation.Shell
-
- BOTTOM - Static variable in class nxopen.cae.responsesimulation.NodalFunctionEvalShellLocation
-
Bottom layer
- BOTTOM - Static variable in class nxopen.cae.responsesimulation.ShellElementEvaluationLocation
-
- BOTTOM - Static variable in class nxopen.cae.Result.Section
-
- bottom() - Method in interface nxopen.die.RibChildBuilder
-
Returns the bottom limit geometry of the die rib.
- BOTTOM - Static variable in class nxopen.display.Stage.WallType
-
The bottom wall or "floor" of the stage.
- BOTTOM - Static variable in class nxopen.display.TrueShadingBuilder.SurfaceOrientType
-
Project shadows onto the floor
- BOTTOM - Static variable in class nxopen.drawings.View2dOrientBuilder.Type
-
bottom view
- BOTTOM - Static variable in class nxopen.features.sheetmetal.SheetmetalFaceLayer
-
- BOTTOM - Static variable in class nxopen.features.vehicledesign.CloseRangeVisibilityBuilder.PathPositionTypes
-
Bottom
- BOTTOM - Static variable in class nxopen.Light.SceneType
-
Light from the bottom center of the view
- BOTTOM - Static variable in class nxopen.PlotBuilder.YdisplayOption
-
Y dimension bottom
- BOTTOM - Static variable in class nxopen.tooling.AssemblyDrawingBuilder.ModelViewToUseValue
-
- bottom() - Method in interface nxopen.tooling.BlankLayoutBuilder
-
Returns the bottom boundary distance between blank and strip.
- BOTTOM - Static variable in class nxopen.tooling.BlankLayoutBuilder.SideWebOption
-
the side webs type of bottom
- BOTTOM - Static variable in class nxopen.tooling.FastenerAssy.SelectionObjectMethod
-
Bottom object
- BOTTOM - Static variable in class nxopen.tooling.PiercingInsertBuilder.InsertPosition
-
The position is bottom side
- bottom - Variable in class nxopen.uf.UFPlot.Extents
-
- BOTTOM - Static variable in class nxopen.View.Canned
-
- BOTTOM_ARROW - Static variable in class nxopen.drawings.BordersAndZonesBuilder.VerticalCenteringMarkType
-
Deprecated.
Bottom Arrow
- BOTTOM_ARROW - Static variable in class nxopen.drawings.VerticalCenteringMarkType
-
Bottom Arrow
- BOTTOM_BRIDGE_CURVE - Static variable in class nxopen.features.StyledCornerBuilder.CurveControlTypes
-
Use bottom curve
- BOTTOM_CENETER - Static variable in class nxopen.annotations.AlignmentPosition
-
Use Annotations.AlignmentPosition#BOTTOM_CENTER
instead
- BOTTOM_CENTER - Static variable in class nxopen.annotations.AlignmentPosition
-
- BOTTOM_CENTER - Static variable in class nxopen.annotations.OriginBuilder.AlignmentPosition
-
Bottom center position
- BOTTOM_CENTER - Static variable in class nxopen.annotations.RegionBuilder.AlignmentPosition
-
bottom center
- BOTTOM_CENTER - Static variable in class nxopen.annotations.TableCellStyleBuilder.TextAlignmentType
-
Bottom center
- BOTTOM_CENTER - Static variable in class nxopen.display.ImageBaseBuilder.BasePointChoices
-
bottom center
- BOTTOM_CENTER - Static variable in class nxopen.display.TransientText.StandardTextRef
-
Display the text with the given position
in bottom center of text box
- BOTTOM_CENTER - Static variable in class nxopen.geometricutilities.RectangularFrameBuilder.AnchorLocationType
-
Bottom center position
- BOTTOM_CENTER - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.StandardTextRef
-
Display the text with the given position
in bottom center of text box
- BOTTOM_CENTER - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.TextRef
-
Display the text with the given position in bottom center of text box
- BOTTOM_END - Static variable in class nxopen.drawings.BrokenViewBuilder.VerticalBreakSide
-
Hide Bottom side
- BOTTOM_FACE - Static variable in class nxopen.preferences.PartFlexiblePrintedCircuitDesign.FlexibleCableContactFaceOptions
-
Bottom face.
- BOTTOM_FILLED_ARROW - Static variable in class nxopen.annotations.ArrowheadType
-
- BOTTOM_FILLED_ARROW - Static variable in class nxopen.annotations.LeaderData.ArrowheadType
-
bottom filled arrowhead
- BOTTOM_FIXED - Static variable in class nxopen.display.TrueShadingBuilder.SurfaceOrientType
-
Project shadows onto a fixed oriented floor
- BOTTOM_LEFT - Static variable in class nxopen.annotations.AlignmentPosition
-
- BOTTOM_LEFT - Static variable in class nxopen.annotations.DrawingFormatTitleBuilder.TitleBlockPositionType
-
- BOTTOM_LEFT - Static variable in class nxopen.annotations.HoleTableSettingsLabelBuilder.RelativeLocationType
-
Bottom Left
- BOTTOM_LEFT - Static variable in class nxopen.annotations.OriginBuilder.AlignmentPosition
-
Bottom left position
- BOTTOM_LEFT - Static variable in class nxopen.annotations.RegionBuilder.AlignmentPosition
-
bottom left
- BOTTOM_LEFT - Static variable in class nxopen.annotations.TableCellStyleBuilder.TextAlignmentType
-
Bottom left
- BOTTOM_LEFT - Static variable in class nxopen.annotations.TableSectionStyleBuilder.AlignmentPositionType
-
Bottom Left
- BOTTOM_LEFT - Static variable in class nxopen.display.DecalBuilder.Anchor
-
anchor at the bottom left corner of decal image
- BOTTOM_LEFT - Static variable in class nxopen.display.ImageBaseBuilder.BasePointChoices
-
bottom left
- BOTTOM_LEFT - Static variable in class nxopen.display.TransientText.StandardTextRef
-
Display the text with the given position
in bottom left of text box
- BOTTOM_LEFT - Static variable in class nxopen.drawings.BordersAndZonesBuilder.ZoneOrigin
-
Deprecated.
- BOTTOM_LEFT - Static variable in class nxopen.drawings.ZoneOrigin
-
- BOTTOM_LEFT - Static variable in class nxopen.geometricutilities.RectangularFrameBuilder.AnchorLocationType
-
Bottom left position
- BOTTOM_LEFT - Static variable in class nxopen.preferences.SessionVisualizationScreen.ViewTriadLocation
-
View triad display on the bottom left of the view
- BOTTOM_LEFT - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.StandardTextRef
-
Display the text with the given position
in bottom left of text box
- BOTTOM_LEFT - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.TextRef
-
Display the text with the given position in bottom left of text box
- BOTTOM_MAJOR_PRINCIPAL_STRAIN - Static variable in class nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder.StrainTypeName
-
Display bottom major principal strain.
- BOTTOM_MIDDLE - Static variable in class nxopen.annotations.HoleTableSettingsLabelBuilder.RelativeLocationType
-
Bottom Middle
- BOTTOM_MIDDLE - Static variable in class nxopen.display.DecalBuilder.Anchor
-
anchor at bottom middle corner of decal image
- BOTTOM_MINOR_PRINCIPAL_STRAIN - Static variable in class nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder.StrainTypeName
-
Display bottom minor principal strain.
- BOTTOM_NODE - Static variable in class nxopen.tooling.FastenerAssy.StackTypeMethod
-
Bottom node type
- BOTTOM_OPEN_ARROW - Static variable in class nxopen.annotations.ArrowheadType
-
- BOTTOM_OPEN_ARROW - Static variable in class nxopen.annotations.LeaderData.ArrowheadType
-
bottom open arrowhead
- BOTTOM_PRINCIPAL_STRAIN - Static variable in class nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder.FormabilityStrainTypeName
-
Display bottom principal strain.
- BOTTOM_REGIONS - Static variable in class nxopen.cam.NcmPlanarBuilder.PredrillPointsOutputOptions
-
Pre-Drill Points for bottom regions only
- BOTTOM_RIGHT - Static variable in class nxopen.annotations.AlignmentPosition
-
- BOTTOM_RIGHT - Static variable in class nxopen.annotations.DrawingFormatTitleBuilder.TitleBlockPositionType
-
- BOTTOM_RIGHT - Static variable in class nxopen.annotations.HoleTableSettingsLabelBuilder.RelativeLocationType
-
Bottom Right
- BOTTOM_RIGHT - Static variable in class nxopen.annotations.OriginBuilder.AlignmentPosition
-
Bottom right position
- BOTTOM_RIGHT - Static variable in class nxopen.annotations.RegionBuilder.AlignmentPosition
-
bottom right
- BOTTOM_RIGHT - Static variable in class nxopen.annotations.TableCellStyleBuilder.TextAlignmentType
-
Bottom right
- BOTTOM_RIGHT - Static variable in class nxopen.annotations.TableSectionStyleBuilder.AlignmentPositionType
-
Bottom right
- BOTTOM_RIGHT - Static variable in class nxopen.display.DecalBuilder.Anchor
-
anchor at bottom right corner of decal image
- BOTTOM_RIGHT - Static variable in class nxopen.display.ImageBaseBuilder.BasePointChoices
-
bottom left
- BOTTOM_RIGHT - Static variable in class nxopen.display.TransientText.StandardTextRef
-
Display the text with the given position
in bottom right of text box
- BOTTOM_RIGHT - Static variable in class nxopen.drawings.BordersAndZonesBuilder.ZoneOrigin
-
Deprecated.
Bottom Right
- BOTTOM_RIGHT - Static variable in class nxopen.drawings.ZoneOrigin
-
Bottom Right
- BOTTOM_RIGHT - Static variable in class nxopen.geometricutilities.RectangularFrameBuilder.AnchorLocationType
-
Bottom right position
- BOTTOM_RIGHT - Static variable in class nxopen.preferences.SessionVisualizationScreen.ViewTriadLocation
-
View triad display on the bottom right of the view
- BOTTOM_RIGHT - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.StandardTextRef
-
Display the text with the given position
in bottom right of text box
- BOTTOM_RIGHT - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.TextRef
-
Display the text with the given position in bottom right of text box
- BOTTOM_STACK - Static variable in class nxopen.tooling.FastenerAssy.StackTypeMethod
-
Bottom stack type
- BOTTOMAND_TOP_ARROW - Static variable in class nxopen.drawings.BordersAndZonesBuilder.VerticalCenteringMarkType
-
Deprecated.
Bottom and Top Arrow
- BOTTOMAND_TOP_ARROW - Static variable in class nxopen.drawings.VerticalCenteringMarkType
-
Bottom and Top Arrow
- BOTTOMAND_TOP_LINE - Static variable in class nxopen.drawings.BordersAndZonesBuilder.VerticalCenteringMarkType
-
Deprecated.
- BOTTOMAND_TOP_LINE - Static variable in class nxopen.drawings.VerticalCenteringMarkType
-
- bottomAngle() - Method in interface nxopen.features.vehicledesign.WindshieldDatumBuilder
-
Returns the bottom inclined angle.
- bottomBridgeCurveContinuity() - Method in interface nxopen.features.StyledCornerBuilder
-
Returns the bottom bridge curve continuity
License requirements: None.
- BOTTOMCENTER - Static variable in class nxopen.uf.UFDisp.TextRef
-
- bottomClearance() - Method in interface nxopen.tooling.ChannelFittingBuilder
-
Returns the bottom clearance
License requirements: None.
- bottomCorner() - Method in interface nxopen.assemblies.BoxSearchTermBuilder
-
Returns
the bottom corner of the box.
- bottomDepth - Variable in class nxopen.uf.UFModl.AskTSlotParmsData
-
- bottomDistance() - Method in interface nxopen.features.OffsetEmbossBuilder
-
Returns the bottom distance(Only for point case):
The bottom distance defines the extent of the offset pad from the reference point below the point.
- bottomEnd() - Method in interface nxopen.die.RibChildBuilder
-
Returns the bottom end limit geometry of the die rib.
- bottomExtension() - Method in interface nxopen.weld.GrooveBuilder
-
- bottomHorizontalOffset() - Method in interface nxopen.die.RibChildBuilder
-
Returns the bottom horizontal offset of the die rib.
- bottomHorizontalOffset() - Method in interface nxopen.die.RibParentBuilder
-
Returns the bottom horizontal offset of die ribs.
- BOTTOMLEFT - Static variable in class nxopen.uf.UFDisp.TextRef
-
- bottomLeftInPlane - Variable in class nxopen.uf.UFTurn.IpwBoxData
-
- bottomLeftPnt3 - Variable in class nxopen.uf.UFTurn.IpwBoxData
-
- bottomLimitOffset() - Method in interface nxopen.die.RibChildBuilder
-
Returns the bottom limit offset of the die rib.
- bottomLimitOffset() - Method in interface nxopen.die.RibParentBuilder
-
Returns the bottom limit offset of die ribs.
- bottomLineCfw - Variable in class nxopen.uf.UFTabnot.CellPrefs
-
- bottomMargin() - Method in interface nxopen.drawings.BordersAndZonesBuilder
-
- bottomOffset() - Method in interface nxopen.cam.CylindricalMillingCutParameters
-
Returns the bottom offset
License requirements: None.
- bottomOffset() - Method in interface nxopen.cam.HoleDrillingCutParameters
-
Returns the bottom offset
License requirements: None.
- bottomPlateClearance() - Method in interface nxopen.tooling.BendInsertDesignBuilder
-
Returns the clearance value of bottom backing plate.
- bottomPlateClearance() - Method in interface nxopen.tooling.FormingInsertBuilder
-
Returns the clearance value of bottom backing plate .
- bottomPlateClearance() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the bottom plate clearance.
- BOTTOMRIGHT - Static variable in class nxopen.uf.UFDisp.TextRef
-
- bottomrightcorner - Variable in class nxopen.gateway.ImageCaptureBuilder.RegionData
-
Array of 2 integers for Bottom Right Corner of Region
- bottomRightPnt3 - Variable in class nxopen.uf.UFTurn.IpwBoxData
-
- bottomShapeControlMethods() - Method in interface nxopen.features.StyledCornerBuilder
-
Returns the bottom shape control methods
License requirements: None.
- bottomStock() - Method in interface nxopen.cam.HoleMachiningCutParameters
-
Returns the bottom stock
License requirements: None.
- bottomSurface() - Method in interface nxopen.cam.DrillGeomBuilder
-
Returns the bottom surface builder
License requirements: None.
- bottomSurface() - Method in interface nxopen.cam.PointToPointBuilder
-
Returns the bottom surface builder
License requirements: None.
- bottomTangentMagnitude() - Method in interface nxopen.features.StyledCornerBuilder
-
Returns the bottom tangent magnitude
License requirements: None.
- bottomTrimmedMargin() - Method in interface nxopen.drawings.SheetMarginSettingsBuilder
-
Returns the bottom margin
License requirements: None.
- bottomUntrimmedMargin() - Method in interface nxopen.drawings.SheetMarginSettingsBuilder
-
Returns the bottom untrimmed margin
License requirements: None.
- bottomVerticalOffset() - Method in interface nxopen.die.RibChildBuilder
-
Returns the bottom vertical offset of the die rib.
- bottomVerticalOffset() - Method in interface nxopen.die.RibParentBuilder
-
Returns the bottom vertical offset of die ribs.
- bottomView() - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
Returns the bottom view
License requirements: None.
- bottomWidth - Variable in class nxopen.uf.UFModl.AskTSlotParmsData
-
- BOTTON - Static variable in class nxopen.cae.responsesimulation.StrainGageShellElementFaceType
-
- boudaryCurveSelection() - Method in interface nxopen.tooling.DieDesPierceInsertBuilder
-
Returns the boundary curve selection.
- BOUND - Static variable in class nxopen.drawings.ViewBoundaryBuilder.Type
-
bound by objects
- bound() - Method in interface nxopen.UFSession
-
- bound1Pts - Variable in class nxopen.uf.UFCurve.TrimMult
-
- bound2Pts - Variable in class nxopen.uf.UFCurve.TrimMult
-
- BOUND_BY_OBJECTS_TYPE - Static variable in class nxopen.uf.UFDraw.BoundaryType
-
- BOUND_TO_BOUND - Static variable in class nxopen.features.shipdesign.StiffenerBySupportPathBuilder.Method
-
Bound to Bound
- boundaries() - Method in interface nxopen.features.shipdesign.ProfileTransitionBuilder
-
Returns the collector containing the boundary bodies.
- boundaries() - Method in interface nxopen.features.shipdesign.SteelInsulationBoundaryBuilder
-
Returns the face or edges that will be used to bound the insulation body.
- boundaries - Variable in class nxopen.uf.UFCambnd.AskBoundariesData
-
- boundary() - Method in interface nxopen.annotations.HatchBuilder
-
Returns the boundary
License requirements: None.
- Boundary - Interface in nxopen.cam
-
Represents a CAM boundary object .
- boundary() - Method in interface nxopen.cam.BoundaryTurnBlank
-
Returns the boundary
License requirements: None.
- BOUNDARY - Static variable in class nxopen.cam.CornerControlBuilder.SmoothCornersAtOptions
-
Boundary
- BOUNDARY - Static variable in class nxopen.cam.DmBndBuilder.ApplyFilletAtTypes
-
Boundary
- BOUNDARY - Static variable in class nxopen.cam.SurfaceContourBuilder.DriveMethodTypes
-
Boundary
- BOUNDARY - Static variable in class nxopen.cam.ToolPathEditorBuilder.TrimGeometryType
-
- boundary() - Method in interface nxopen.die.FillAreaBuilder
-
Returns the closed boundary profile that defines the fill area.
- BOUNDARY - Static variable in class nxopen.drawings.DetailViewBuilder.LabelOnParentType
-
The shape is the same as the boundary
- BOUNDARY - Static variable in class nxopen.drawings.ViewDetailLabelBuilder.LabelParentDisplayTypes
-
- BOUNDARY - Static variable in class nxopen.features.AOCSBuilder.ExtendToFace
-
extend till face boundary
- BOUNDARY - Static variable in class nxopen.uf.UFDieeng.Opts
-
- BOUNDARY - Static variable in class nxopen.uf.UFGdt.ModifierTypes
-
- boundary() - Method in interface nxopen.weld.SurfaceWeldBuilder
-
Returns the section defining all the boundaries to use for creating the surface weld.
- boundary() - Method in interface nxopen.weld.WeldFillBuilder
-
- BOUNDARY - Static variable in class nxopen.weld.WeldPointExtendMethod
-
Extend offset curves to the faces boundary.
- boundary1() - Method in interface nxopen.features.shipdesign.ProfileSystemBuilder
-
Returns the collector containing the plate system, profile system, or datum plane that will be
used to trim the first end of the generated profile system.
- boundary1Plane() - Method in interface nxopen.features.shipdesign.ProfileSystemBuilder
-
Returns the defined plane that will be used to trim the first end of the generated profile system.
- boundary2() - Method in interface nxopen.features.shipdesign.ProfileSystemBuilder
-
Returns the collector containing the plate system, profile system, or datum plane that will be used to
trim the second end of the generated profile system.
- boundary2Plane() - Method in interface nxopen.features.shipdesign.ProfileSystemBuilder
-
Returns the defined plane that will be used to trim the second end of the generated profile system.
- BOUNDARY_AND_PART_SURFACE - Static variable in class nxopen.cam.CornerControlBuilder.SmoothCornersAtOptions
-
Boundary and Part Surface
- BOUNDARY_AND_SURFACE - Static variable in class nxopen.cam.DmBndBuilder.ApplyFilletAtTypes
-
Boundary and Part Surface
- BOUNDARY_CONDITION_INFO - Static variable in class nxopen.uf.UFSf.ScenarioInfo
-
- BOUNDARY_FACE_CENTER - Static variable in class nxopen.tooling.MoldCsysBuilder.Wcsposition
-
boundary face center position
- BOUNDARY_LAYERS - Static variable in class nxopen.cae.MeshControlBuilder.Types
-
- BOUNDARY_LINES - Static variable in class nxopen.tooling.ScrapDesignBuilder.ScrapDefType
-
Boundary lines will be used to create an entire scrap
- BOUNDARY_NODES_ONLY - Static variable in class nxopen.cae.AssignNodalCSBuilder.GeometryOption
-
boundary nodes only
- BOUNDARY_PLUS_CENTER - Static variable in class nxopen.features.EdgeBlendBuilder.Conic
-
- BOUNDARY_PLUS_CENTER - Static variable in class nxopen.geometricutilities.ConicCrossSection.DefineMethod
-
conic shape controlled by boundary and center values
- BOUNDARY_PLUS_RHO - Static variable in class nxopen.features.EdgeBlendBuilder.Conic
-
- BOUNDARY_PLUS_RHO - Static variable in class nxopen.geometricutilities.ConicCrossSection.DefineMethod
-
conic shape controlled by boundary and rho values
- BOUNDARY_TYPE_CLOSED - Static variable in class nxopen.uf.UFCam.BoundaryType
-
- BOUNDARY_TYPE_OPEN - Static variable in class nxopen.uf.UFCam.BoundaryType
-
- boundaryApproximation() - Method in interface nxopen.cam.MillCutParameters
-
Returns the boundary approximation toggle
License requirements: None.
- boundaryBody() - Method in interface nxopen.tooling.ChannelFittingBuilder
-
Returns the boundary body to create the cooling fitting points.
- boundaryBody() - Method in interface nxopen.tooling.TrimRegionBuilder
-
Returns the selection of boundary body to extract region faces, which are used for create intersection curves with target.
- BoundaryBuilder - Interface in nxopen.annotations
-
This builder contains the boundaries that define a crosshatch pattern .
- BoundaryBuilder.SelectionMethod - Class in nxopen.annotations
-
This enum represents the methods for selecting boundaries
- boundaryChannelExtension() - Method in interface nxopen.tooling.CoolingExtendBuilder
-
Returns the value of the boundary channel extension.
- boundaryConds - Variable in class nxopen.uf.UFModl.StycornerData
-
- boundaryCurve() - Method in interface nxopen.weld.DatumPinBuilder
-
Returns the resting face
License requirements: None.
- boundaryCurves() - Method in interface nxopen.SketchQuickExtendBuilder
-
- boundaryCurves() - Method in interface nxopen.SketchQuickTrimBuilder
-
- boundaryCurves() - Method in interface nxopen.tooling.DieDesignTrimPostBuilder
-
Returns the boundary curves used to create Trim Post
License requirements: ug_die_design ("Die Design")
.
- boundaryCurves - Variable in class nxopen.uf.UFDraw.AskBoundaryCurvesData
-
- boundaryCurves - Variable in class nxopen.uf.UFDraw.SetBoundaryAssocData
-
- BoundaryData() - Constructor for class nxopen.uf.UFCambnd.BoundaryData
-
- BoundaryData(UFCam.BoundaryType, int, double[], double[], UFCam.MaterialSide, int, int, int, UFCambnd.AppData) - Constructor for class nxopen.uf.UFCambnd.BoundaryData
-
- BoundaryDefinitionBuilder - Interface in nxopen.geometricutilities
-
- BoundaryDefinitionBuilderList - Interface in nxopen.geometricutilities
-
Represents a list of objects.
- boundaryEdges() - Method in interface nxopen.cam.GeometrySet
-
Returns the boundary edges selection collector for a region set
License requirements: None.
- boundaryEdges - Variable in class nxopen.uf.UFModl.SimplData
-
- boundaryFaces() - Method in interface nxopen.cam.SurfaceRegions
-
Returns the boundary faces
License requirements: None.
- boundaryFaces() - Method in interface nxopen.features.ExtractFaceBuilder
-
Returns the boundary faces
License requirements: None.
- boundaryFaces() - Method in interface nxopen.tooling.FormingInsertBuilder
-
Returns the boundary faces of forming region.
- boundaryFaces - Variable in class nxopen.uf.UFModl.DfoRegion
-
- boundaryFaces - Variable in class nxopen.uf.UFModl.SimplData
-
- boundaryFaces - Variable in class nxopen.uf.UFModlFeatures.AskHollowData
-
- boundaryFaces - Variable in class nxopen.uf.UFWave.AskLinkRegionSourcesData
-
- boundaryFacesColor() - Method in interface nxopen.tooling.MWSearchRegionBuilder
-
Returns the color to be applied to the selected boundary faces
License requirements: None.
- boundaryFacetTreatmentType() - Method in interface nxopen.facet.SnipFacetBodyBuilder
-
Returns the boundary facet treatment type
License requirements: None.
- boundaryInTol() - Method in interface nxopen.cam.MillCutParameters
-
Returns the boundary intol
License requirements: None.
- boundaryLayerSize() - Method in interface nxopen.cae.MeshControlDisplayOptionsBuilder
-
Returns the boundary layer size
License requirements: None.
- boundaryList() - Method in interface nxopen.cam.Boundary
-
Returns the boundary list
License requirements: None.
- boundaryList() - Method in interface nxopen.features.shipdesign.SteelInsulationBuilder
-
- boundaryList() - Method in interface nxopen.tooling.ScrapDesignBuilder
-
Returns the boundary list served for boundary line method
License requirements: None.
- boundaryMemberList() - Method in interface nxopen.cam.BoundarySet
-
Returns the boundary member list
License requirements: None.
- BoundaryMemberSet - Interface in nxopen.cam
-
Represents a boundary member set .
- BoundaryMemberSet.ConnectMemberType - Class in nxopen.cam
-
the types available for connect member
- BoundaryMemberSetList - Interface in nxopen.cam
-
Represents a list of objects.
- boundaryMerging() - Method in interface nxopen.cae.PolygonFaceOnMeshBuilder
-
Returns the angle
License requirements: None.
- boundaryMethod() - Method in interface nxopen.weld.WeldFillBuilder
-
Returns the type of boundary to create the fill from.
- BoundaryMillingMemberSet - Interface in nxopen.cam
-
Represents a boundary member set .
- BoundaryMillingMemberSet.FeedUnitTypes - Class in nxopen.cam
-
the types available for the feed rate unit
- BoundaryMillingSet - Interface in nxopen.cam
-
Represents a boundary milling set.
- boundaryObjects() - Method in interface nxopen.SketchQuickExtendBuilder
-
Returns the boundary objects
License requirements: None.
- boundaryObjects() - Method in interface nxopen.SketchQuickTrimBuilder
-
Returns the boundary objects
License requirements: None.
- boundaryOffsetDim1() - Method in interface nxopen.features.StepBuilder
-
Returns the boundary offset dimesion 1
License requirements: None.
- boundaryOffsetDim2() - Method in interface nxopen.features.StepBuilder
-
Returns the boundary offset dimension 2
License requirements: None.
- boundaryOptions() - Method in interface nxopen.cae.AssignNodalCSBuilder
-
Returns the boundary options
License requirements: None.
- boundaryOutTol() - Method in interface nxopen.cam.MillCutParameters
-
Returns the boundary out tol
License requirements: None.
- boundaryPlane() - Method in interface nxopen.features.shipdesign.PlateSystemBuilder
-
Returns the plane defined to indicate the boundary of the plate system.
- boundaryPoint1() - Method in interface nxopen.drawings.DetailViewBuilder
-
Returns
the first boundary point.
- boundaryPoint1() - Method in interface nxopen.drawings.RefineDisplayBuilder
-
Returns
the boundary point1 in drawing coordinates.
- boundaryPoint1() - Method in interface nxopen.drawings.ViewBoundaryBuilder
-
Returns the first corner point
License requirements: None.
- boundaryPoint2() - Method in interface nxopen.drawings.DetailViewBuilder
-
Returns
the second boundary point.
- boundaryPoint2() - Method in interface nxopen.drawings.RefineDisplayBuilder
-
Returns
the boundary point2 in drawing coordinates.
- boundaryPoint2() - Method in interface nxopen.drawings.ViewBoundaryBuilder
-
Returns the second corner point
License requirements: None.
- boundaryPointSetManager() - Method in interface nxopen.features.RapidSurfaceBuilder
-
Returns the boundary point set manager
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- boundaryReverse() - Method in interface nxopen.features.shipdesign.ProfileSystemBuilder
-
Returns the indication if the side of a single boundary should be changed to the other side or not.
- boundarySection() - Method in interface nxopen.features.OvercrownBuilder
-
Returns the boundary section.
- boundarySection() - Method in interface nxopen.features.shipdesign.PlateSystemBuilder
-
Returns the section containing curves that define the boundary of the plate system.
- boundarySegment() - Method in interface nxopen.tooling.BlankNestingBuilder
-
Returns the number of boundary segment.
- boundarySelection() - Method in interface nxopen.tooling.EnlargeSurfaceBuilder
-
Returns the selection of boundary to trim the target surface, it could be face, datum plane, edge and curve.
- BoundarySet - Interface in nxopen.cam
-
Represents a boundary set.
- BoundarySet.BoundaryTypes - Class in nxopen.cam
-
the boundary types .
- BoundarySet.PlaneTypes - Class in nxopen.cam
-
the boundary plane types .
- BoundarySet.ToolPositionTypes - Class in nxopen.cam
-
the tool position .
- BoundarySet.ToolSideTypes - Class in nxopen.cam
-
the tool side types .
- BoundarySetList - Interface in nxopen.cam
-
Represents a list of objects.
- boundarySheets() - Method in interface nxopen.features.shipdesign.PlateSystemBuilder
-
Returns the sheet bodies or datum planes selected, or a face collector used to define the boundary of the plate system.
- boundaryStatus() - Method in interface nxopen.drawings.GeneralViewStyle
-
Returns the boundary status.
- boundaryStatus() - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
Returns the boundary status toggle on the GENERAL tab of the View Style Dialog
License requirements: None.
- boundaryStatus() - Method in interface nxopen.preferences.GeneralViewPreferences
-
Returns the boundary status.
- boundaryStock() - Method in interface nxopen.cam.MillCutParameters
-
Returns the boundary stock
License requirements: None.
- boundaryTags - Variable in class nxopen.uf.UFDrf.AskBoundariesData
-
- boundaryTrim - Variable in class nxopen.uf.UFModl.RoughOffset
-
- BoundaryTurnBlank - Interface in nxopen.cam
-
- BoundaryTurnBlank.Position - Class in nxopen.cam
-
the mounting direction types available
- BoundaryTurnBlank.Type - Class in nxopen.cam
-
the blank types available
- BoundaryTurnMemberCorner - Interface in nxopen.cam
-
- BoundaryTurnMemberCorner.AngleValueType - Class in nxopen.cam
-
the corner angle types available
- BoundaryTurnMemberCorner.CornerType - Class in nxopen.cam
-
the corner types available
- BoundaryTurnMemberCorner.FeedType - Class in nxopen.cam
-
the corner feed rate types available
- BoundaryTurnMemberCorner.ShapeType - Class in nxopen.cam
-
the corner shape types available
- BoundaryTurnMemberEvents - Interface in nxopen.cam
-
- BoundaryTurnMemberFeed - Interface in nxopen.cam
-
- BoundaryTurnMemberFeed.FeedType - Class in nxopen.cam
-
the corner feed rate types available
- BoundaryTurnMemberFineFinishCorner - Interface in nxopen.cam
-
- BoundaryTurnMemberFineFinishCorner.AppliedTo - Class in nxopen.cam
-
the corner applied to available
- BoundaryTurnMemberFineFinishCorner.Cleanup - Class in nxopen.cam
-
the corner cleanup available
- BoundaryTurnMemberFineFinishCorner.ValueType - Class in nxopen.cam
-
the corner types available
- BoundaryTurnMemberFineFinishOffset - Interface in nxopen.cam
-
- BoundaryTurnMemberFineFinishOffset.StatusValue - Class in nxopen.cam
-
the fine finish offset stati available
- BoundaryTurnMemberFineFinishOffset.TypeValue - Class in nxopen.cam
-
the types available for fine finsish offset method
- BoundaryTurnMemberOffset - Interface in nxopen.cam
-
- BoundaryTurnMemberOffset.DistanceTypeMode - Class in nxopen.cam
-
the types available for member distance
- BoundaryTurnMemberOffset.MethodType - Class in nxopen.cam
-
the types available for member offset method
- BoundaryTurnMemberOffset.ModeType - Class in nxopen.cam
-
the types available for member offset mode
- BoundaryTurnMemberSet - Interface in nxopen.cam
-
Represents a boundary turning member set .
- BoundaryTurnMemberSet.ConcaveCornersTypeValue - Class in nxopen.cam
-
the types available for the concave corners
- BoundaryTurnSet - Interface in nxopen.cam
-
Represents a boundary turning set.
- BoundaryTurnSet.FeedUnitTypes - Class in nxopen.cam
-
the types available for the feed rate unit
- BoundaryTurnVariableStock - Interface in nxopen.cam
-
Represents a BoundaryTurnVariableStock
This is an abstract class and cannot be instantiated.
- BoundaryTurnVariableStock.PositionType - Class in nxopen.cam
-
the position types available
- BoundaryTurnVariableStockSet - Interface in nxopen.cam
-
- BoundaryTurnVariableStockSetList - Interface in nxopen.cam
-
Represents a list of objects.
- boundaryType() - Method in interface nxopen.cam.BoundarySet
-
Returns the boundary type
License requirements: None.
- boundaryType() - Method in interface nxopen.drawings.ViewBoundaryBuilder
-
Returns the orientation type
License requirements: None.
- boundaryType() - Method in interface nxopen.tooling.TrimRegionBuilder
-
Returns the value of boundary type option, which specifies to use body or edge/curve as boundary object.
- boundaryType - Variable in class nxopen.uf.UFCambnd.BoundaryData
-
- boundaryType - Variable in class nxopen.uf.UFModl.SnipsrfFeatureData
-
- BOUNDED - Static variable in class nxopen.cam.CamInspectionOperationExtenttypes
-
Feature extent has bounds
- BOUNDED - Static variable in class nxopen.cam.InspectionMeasDataBuilder.BoundingType
-
- BOUNDED_BLOCK - Static variable in class nxopen.features.ToolingBoxBuilder.Types
-
bounded block
- BOUNDED_CYLINDER - Static variable in class nxopen.features.ToolingBoxBuilder.Types
-
bounded cylinder
- BOUNDED_FEATURE - Static variable in class nxopen.uf.UFGdt.FeatureType
-
- BOUNDED_GRID - Static variable in class nxopen.InferSnapType.SnapType
-
Snap point on bounded grid
- BOUNDED_PLANE - Static variable in class nxopen.tooling.MWDesignPartingSurfaceBuilder.PartingSurfaceType
-
Bounded plane
- BOUNDED_PLANE - Static variable in class nxopen.tooling.MWDesignPartingSurfaceBuilder.TransitionSurfaceType
-
Bounded transition surface
- BoundedGrid - Interface in nxopen.display
-
Represents a bounded grid
Bounded grids are not supported in KF.
- BoundedGridBuilder - Interface in nxopen.display
-
Represents the builder for creating a bounded grid
BoundedGrid
.
- BoundedGridBuilder.CornerPointsData - Class in nxopen.display
-
- BoundedGridBuilder.LabelReferenceType - Class in nxopen.display
-
Specifies label reference.
- BoundedGridBuilder.ShowLabelType - Class in nxopen.display
-
Specifies label option to be used for grid label display.
- boundedObject() - Method in interface nxopen.features.ToolingBoxBuilder
-
Returns the objects used for bounded box creation.
- boundedObjects() - Method in interface nxopen.fields.SpatialMapBuilder
-
Returns the bounded objects
License requirements: None.
- boundedObjects - Variable in class nxopen.uf.UFDraw.AskBoundByObjectsData
-
- BoundedPlane - Interface in nxopen.features
-
Represents a bounded plane feature
To create or edit an instance of this class, use
BoundedPlaneBuilder
Created in NX6.0.0
- BoundedPlaneBuilder - Interface in nxopen.features
-
- BOUNDING - Static variable in class nxopen.tooling.CreateBoxBuilder.BoxType
-
bounding box
- BOUNDING_BLOCK - Static variable in class nxopen.sim.SinumerikCaSimplifyBodiesBuilder.ObjectToReplaceWithTypes
-
Bounding Block
- BOUNDING_BOX - Static variable in class nxopen.cam.NcmClearanceBuilder.ClearanceTypes
-
clearance box
- BOUNDING_BOX - Static variable in class nxopen.tooling.GeneralInsertBuilder.GenerateMethod
-
- BOUNDING_CYLINDER - Static variable in class nxopen.cam.NcmClearanceBuilder.ClearanceTypes
-
clearance bounding cylinder
- BOUNDING_CYLINDER - Static variable in class nxopen.sim.SinumerikCaSimplifyBodiesBuilder.ObjectToReplaceWithTypes
-
Bounding Cylinder
- BOUNDING_SPHERE - Static variable in class nxopen.sim.SinumerikCaSimplifyBodiesBuilder.ObjectToReplaceWithTypes
-
Bounding Sphere
- boundingBox() - Method in interface nxopen.drawings.ViewCopyTo3dBuilder
-
Returns the type of bounding box
License requirements: None.
- boundingBoxBuilder() - Method in interface nxopen.tooling.ReplaceSolidBuilder
-
- boundingBoxClearance() - Method in interface nxopen.cam.NcmClearanceBuilder
-
Returns the distance for bounding box clearance
License requirements: None.
- boundingBoxComponents() - Method in interface nxopen.annotations.LightweightSectionBuilder
-
Returns the objects to define the box section type bounding extents
License requirements: None.
- boundingBoxMap() - Method in interface nxopen.fields.SpatialMapBuilder
-
Returns the bounding box map
License requirements: None.
- boundingCurve() - Method in interface nxopen.geometricutilities.BoundingObjectBuilder
-
Returns the existing bounding curve.
- boundingCurves() - Method in interface nxopen.features.BoundedPlaneBuilder
-
Returns the bounding curves
License requirements: None.
- BoundingObjectBuilder - Interface in nxopen.geometricutilities
-
- BoundingObjectBuilder.Method - Class in nxopen.geometricutilities
-
Represents Bounding Object option types.
- BoundingObjectBuilderList - Interface in nxopen.geometricutilities
-
Represents a list of objects.
- boundingObjectMethod() - Method in interface nxopen.geometricutilities.BoundingObjectBuilder
-
Returns the bounding object method
License requirements: None.
- boundingObjects() - Method in interface nxopen.features.DivideCurveBuilder
-
Returns the Bounding Objects list
License requirements: None.
- boundingPlane() - Method in interface nxopen.geometricutilities.BoundingObjectBuilder
-
Returns the bounding plane.
- boundingPoint() - Method in interface nxopen.geometricutilities.BoundingObjectBuilder
-
Returns the bounding point.
- boundingPoint1() - Method in interface nxopen.geometricutilities.BoundingObjectBuilder
-
Returns the bounding point1.
- boundingPoint2() - Method in interface nxopen.geometricutilities.BoundingObjectBuilder
-
Returns the bounding point2.
- boundingProjectPoint() - Method in interface nxopen.geometricutilities.BoundingObjectBuilder
-
Returns the bounding project point.
- boundingVector() - Method in interface nxopen.geometricutilities.BoundingObjectBuilder
-
Returns the bounding vector.
- boundingViews() - Method in interface nxopen.drawings.ViewCopyTo3dBuilder
-
Returns the select views in the placement group
License requirements: None.
- Bounds() - Constructor for class nxopen.fields.FieldVariable.Bounds
-
- Bounds(boolean, boolean, double, boolean, boolean, double) - Constructor for class nxopen.fields.FieldVariable.Bounds
-
Constructor for the Bounds object.
- boundsComputed - Variable in class nxopen.uf.UFDisp.ComputeModelBoundsData
-
- boundSections1() - Method in interface nxopen.geometricanalysis.sectionanalysis.GridSpacingBuilder
-
Returns the flag to bound the section to grid in direction 1
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- boundSections2() - Method in interface nxopen.geometricanalysis.sectionanalysis.GridSpacingBuilder
-
Returns the flag to bound the section to grid in direction 2
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- boutput() - Method in interface nxopen.cam.AlongMachineAxisMoveBuilder
-
Returns the B output
License requirements: None.
- BOX - Static variable in class nxopen.annotations.LineWeldBuilder.TailType
-
- BOX - Static variable in class nxopen.annotations.Tail
-
Specifies box tail
- BOX - Static variable in class nxopen.display.DynamicSectionTypes.Type
-
Box section
- BOX - Static variable in class nxopen.mechatronics.CollisionBodyBuilder.CollisionShapeTypes
-
Box
- BOX - Static variable in class nxopen.mechatronics.CollisionSensorBuilder.CollisionShapeTypes
-
Box
- BOX - Static variable in class nxopen.tooling.SubInsertBuilder.Shape
-
The shape is a block
- box - Variable in class nxopen.uf.UFModeling.AskFaceData
-
- BOX_AND_ARROWS - Static variable in class nxopen.cae.Post.MarkTensorStyle
-
- BOX_ARROW - Static variable in class nxopen.annotations.ArrowheadType
-
- BOX_ARROW - Static variable in class nxopen.uf.UFDrf.ArrowheadAndFillType
-
- boxColor() - Method in interface nxopen.features.ToolingBoxBuilder
-
Returns the box color.
- boxColor() - Method in interface nxopen.tooling.CreateBoxBuilder
-
Returns the box color.
- boxExtentDelayUpdate() - Method in interface nxopen.display.DynamicSectionBuilder
-
Returns the delay box extent update.
- boxExtentMargin() - Method in interface nxopen.display.DynamicSectionBuilder
-
Returns the margin for box section extents
Use Display.DynamicSectionBuilder#boxExtentSupported
to determine if extent construction is supported before querying or
setting extent attributes.
- boxExtentObjects() - Method in interface nxopen.display.DynamicSectionBuilder
-
Returns the objects that define the extents for box section.
- boxExtentSupported() - Method in interface nxopen.display.DynamicSectionBuilder
-
Returns the box extent support.
- boxFaceToggle() - Method in interface nxopen.tooling.ReplaceSolidBuilder
-
Returns the face used for box creation.
- boxOffset() - Method in interface nxopen.tooling.GeneralInsertBuilder
-
Returns the box offset
License requirements: None.
- boxOverlapLogic() - Method in interface nxopen.assemblies.BoxSearchTermBuilder
-
Returns
the box overlap logic.
- boxPosition() - Method in interface nxopen.features.ToolingBoxBuilder
-
Returns the position of csys for box.
- BoxSearchTerm - Interface in nxopen.assemblies
-
- BoxSearchTerm.BoxOverlapLogicType - Class in nxopen.assemblies
-
Logic used to determine the type of inclusion used in a box search term within a recipe.
- BoxSearchTermBuilder - Interface in nxopen.assemblies
-
A BoxSearchTermBuilder is used to create or edit an
BoxSearchTerm
.
- bp1Left() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
Returns the left BP1 alternative point.
- bp1LeftFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
Returns the left BP1 alternative point flag.
- bp1Right() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
Returns the right BP1 alternative point.
- bp1RightFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
Returns the right BP1 alternative point flag.
- bp2Left() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
Returns the left BP2 alternative point.
- bp2Left() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarWizardBuilder
-
Returns the left B-pillar 2 point.
- bp2LeftFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
Returns the left BP2 alternative point flag.
- bp2Right() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
Returns the right BP2 alternative point.
- bp2Right() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarWizardBuilder
-
Returns the right B-pillar 2 point.
- bp2RightFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
Returns the right BP2 alternative point flag.
- bp3Left() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
Returns the left BP3 alternative point.
- bp3LeftFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
Returns the left BP3 alternative point flag.
- bp3Right() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
Returns the right BP3 alternative point.
- bp3RightFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
Returns the right BP3 alternative point flag.
- bp4Left() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
Returns the left BP4 alternative point.
- bp4LeftFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
Returns the left BP4 alternative point flag.
- bp4Right() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
Returns the right BP4 alternative point.
- bp4RightFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
Returns the right BP4 alternative point flag.
- bpillarFeature() - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder
-
Returns the b-pillar feature for this head impact study.
- bpillarLeft() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarWizardBuilder
-
Returns the left B pillar geometry.
- bpillarRight() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarWizardBuilder
-
Returns the right B pillar geometry.
- BPLANE_INQUIRE_ERROR - Static variable in class nxopen.uf.UFConstants
-
- BPLUS - Static variable in class nxopen.PrintBuilder.PaperSize
-
SuperB/A3 305 x 487-millimeters
- BRACKET - Static variable in class nxopen.features.shipdesign.UpdateShipLibraryBuilder.ShipLibOptionType
-
- branchAngleMethod() - Method in interface nxopen.formboard.FormboardLayoutBuilder
-
Returns the branch angle type.
- branchAngleType() - Method in interface nxopen.formboard.OrientBranchBuilder
-
- BranchPathNumberingBuilder - Interface in nxopen.routing
-
Builder class for Branch Path Numbering.
- BranchPathNumberingBuilder.Sequence - Class in nxopen.routing
-
Specifies the sequence method
- branchShapeType() - Method in interface nxopen.formboard.FormboardLayoutBuilder
-
Returns the branch shape type.
- BRAND_NEW - Static variable in class nxopen.routing.ControlPointCollection.FoundExisting
-
Object is a new object.
- BRDGCRV_BAD_CURVE1 - Static variable in class nxopen.uf.UFConstants
-
- BRDGCRV_BAD_CURVE2 - Static variable in class nxopen.uf.UFConstants
-
- BRDGCRV_BAD_MATCH_PARM - Static variable in class nxopen.uf.UFConstants
-
- BRDGCRV_BAD_SHAPE_EXP - Static variable in class nxopen.uf.UFConstants
-
- BRDGCRV_BAD_STIFF_PARM - Static variable in class nxopen.uf.UFConstants
-
- BRDGCRV_MATCH_OUT_OF_RANGE - Static variable in class nxopen.uf.UFConstants
-
- BREAK - Static variable in class nxopen.cam.TurnCornerControl.Types
-
Corner Control Types is Break.
- BREAK - Static variable in class nxopen.cam.TurnGrooveCornerControl.CornerTypes
-
Groove Corner Control corner type is Break.
- BREAK_DETAIL_TYPE - Static variable in class nxopen.uf.UFDraw.BoundaryType
-
- BREAK_IPW - Static variable in class nxopen.cam.TurnGrooveCornerControl.CornerTypes
-
Groove Corner Control corner type is Break (IPW).
- BREAK_LINE - Static variable in class nxopen.drawings.ViewBoundaryBuilder.Type
-
break line / detail
- BREAK_POSITION_DEFAULT - Static variable in class nxopen.uf.UFDraw.BreakPositionType
-
- BREAK_POSITION_DISTANCE - Static variable in class nxopen.uf.UFDraw.BreakPositionType
-
- BREAK_POSITION_INFERRED - Static variable in class nxopen.uf.UFDraw.BreakPositionType
-
- BREAK_POSITION_TWO_REGIONS - Static variable in class nxopen.uf.UFDraw.BreakPositionType
-
- BREAK_SUBTYPE - Static variable in class nxopen.uf.UFView.Subtype
-
- BREAKAFTERSTOCK - Static variable in class nxopen.cam.BoundaryTurnMemberCorner.ShapeType
-
- BREAKBEFORESTOCK - Static variable in class nxopen.cam.BoundaryTurnMemberCorner.ShapeType
-
- breakChain(NXObject, NXObject, Point3d) - Method in interface nxopen.SketchOffsetBuilder
-
This function breaks the base chain and all the associated offsets at a given location
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- BreakCorner - Interface in nxopen.features
-
Represents a BreakCorner feature
To create or edit an instance of this class, use
BreakCornerBuilder
Created in NX5.0.0
- BreakCornerBuilder - Interface in nxopen.features.sheetmetal
-
Represents a break corner feature builder.
- BreakCornerBuilder.TypeOptions - Class in nxopen.features.sheetmetal
-
This enum represents the break corner type.
- breakerHoleDepth() - Method in interface nxopen.die.PierceHoleChildBuilder
-
Returns the breaker hole depth of the pierce hole
License requirements: ug_die_design ("Die Design")
.
- breakerHoleDepth() - Method in interface nxopen.die.PierceHoleParentBuilder
-
Returns the breaker hole depth of pierce holes
License requirements: ug_die_design ("Die Design")
.
- breakerHoleDirection() - Method in interface nxopen.die.PierceHoleChildBuilder
-
Returns the breaker hole direction of the pierce hole
License requirements: ug_die_design ("Die Design")
.
- breakerHoleFactor() - Method in interface nxopen.die.PierceHoleChildBuilder
-
Returns the breaker hole factor of the pierce hole
License requirements: ug_die_design ("Die Design")
.
- breakerHoleFactor() - Method in interface nxopen.die.PierceHoleParentBuilder
-
Returns the breaker hole factor of pierce holes
License requirements: ug_die_design ("Die Design")
.
- breakerHoleLocation() - Method in interface nxopen.die.PierceHoleChildBuilder
-
Returns the location of breaker holes for the pierce hole
License requirements: ug_die_design ("Die Design")
.
- breakerHoleOffset() - Method in interface nxopen.die.PierceHoleChildBuilder
-
Returns the breaker hole offset of the pierce hole
License requirements: ug_die_design ("Die Design")
.
- breakerHoleOffset() - Method in interface nxopen.die.PierceHoleParentBuilder
-
Returns the breaker hole offset of pierce holes
License requirements: ug_die_design ("Die Design")
.
- breakGap() - Method in interface nxopen.drawings.ViewBreakBuilder
-
Returns the break gap
License requirements: None.
- BreakingConstraint - Interface in nxopen.mechatronics
-
Represents the Breaking Constraint.
- BreakingConstraintBuilder - Interface in nxopen.mechatronics
-
- BreakingConstraintBuilder.BreakingModeType - Class in nxopen.mechatronics
-
Represents the breaking mode.
- BreakingConstraintCollection - Interface in nxopen.mechatronics
-
Represents a collection of Breaking Constraint.
- breakingConstraints() - Method in interface nxopen.mechatronics.PhysicsManager
-
- breakingMode() - Method in interface nxopen.mechatronics.BreakingConstraintBuilder
-
Returns the breaking mode.
- breakInterpartExpression() - Method in interface nxopen.assemblies.RelinkerBuilder
-
Returns the option to break interpart expression.
- BREAKLINE - Static variable in class nxopen.uf.UFDraw.SxlineType
-
- breakLine1Anchor() - Method in interface nxopen.drawings.BrokenViewBuilder
-
Returns the object specifying the position of the first break line
License requirements: None.
- breakLine1ModelAnchor() - Method in interface nxopen.drawings.BrokenViewBuilder
-
Returns the object specifying the position of the first break line
License requirements: None.
- breakLine1Offset() - Method in interface nxopen.drawings.BrokenViewBuilder
-
Returns the offset from the object locating the first break line
License requirements: None.
- breakLine2Anchor() - Method in interface nxopen.drawings.BrokenViewBuilder
-
Returns the object specifying the position of the second break line.
- breakLine2ModelAnchor() - Method in interface nxopen.drawings.BrokenViewBuilder
-
Returns the object specifying the position of the second break line.
- breakLine2Offset() - Method in interface nxopen.drawings.BrokenViewBuilder
-
Returns the offset from the object locating the second break line.
- breakLineAmplitude() - Method in interface nxopen.drawings.ViewBreakBuilder
-
Returns the break line amplitude
License requirements: None.
- breakLineAmplitude() - Method in interface nxopen.preferences.PartDrafting
-
Returns the break line amplitude.
- breakLineColor() - Method in interface nxopen.preferences.PartDrafting
-
Returns the break line color.
- breakLineColorWidth() - Method in interface nxopen.drawings.ViewBreakBuilder
-
Returns the break line color width
License requirements: None.
- breakLineExtension() - Method in interface nxopen.drawings.ViewBreakBuilder
-
Returns the break line extension
License requirements: None.
- breakLineExtension() - Method in interface nxopen.preferences.PartDrafting
-
Returns
License requirements: None.
- breakLineGap() - Method in interface nxopen.preferences.PartDrafting
-
Returns the break line gap.
- breakLineStyle() - Method in interface nxopen.drawings.ViewBreakBuilder
-
Returns the break line style
License requirements: None.
- breakLinesVisibility() - Method in interface nxopen.preferences.PartDrafting
-
Returns the break lines visibility.
- breakLineType() - Method in interface nxopen.drawings.BrokenViewBuilder
-
Returns the break line type
License requirements: None.
- breakLineType() - Method in interface nxopen.preferences.PartDrafting
-
Returns the break line type.
- breakLineWidth() - Method in interface nxopen.preferences.PartDrafting
-
Returns the break line width.
- breakLink(NXObject) - Method in interface nxopen.tooling.ReusablePocketBuilder
-
Breaks link.
- breakoutData - Variable in class nxopen.uf.UFDraw.AskBreakoutData
-
- BreakoutData() - Constructor for class nxopen.uf.UFDraw.BreakoutData
-
- BreakoutData(Tag, Tag, int, Tag[], boolean[], boolean, boolean) - Constructor for class nxopen.uf.UFDraw.BreakoutData
-
- BreakRegionBoundary() - Constructor for class nxopen.uf.UFDraw.BreakRegionBoundary
-
- BreakRegionBoundary(Tag, boolean, boolean) - Constructor for class nxopen.uf.UFDraw.BreakRegionBoundary
-
- BreakRegionData() - Constructor for class nxopen.uf.UFDraw.BreakRegionData
-
- BreakRegionData(Tag, UFDraw.BreakPositionType, double, Tag[], Tag[]) - Constructor for class nxopen.uf.UFDraw.BreakRegionData
-
- breakRegions - Variable in class nxopen.uf.UFDraw.AskBreakRegionsData
-
- breakRelationship() - Method in interface nxopen.features.PartModule
-
Breaks part module relationship
License requirements: usr_defined_features ("USER DEFINED FEATURES")
.
- breakRelationship(Tag, UFGdt.RelationType) - Method in interface nxopen.uf.UFGdt
-
- breakSettings() - Method in interface nxopen.annotations.StyleBuilder
-
Returns the get break builder
License requirements: None.
- BreakSettingsBuilder - Interface in nxopen.annotations
-
- breakSize() - Method in interface nxopen.annotations.BreakSettingsBuilder
-
Returns the break size
License requirements: None.
- breakThrough() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
-
- breakThroughDistance() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
-
- breakType() - Method in interface nxopen.drawings.BrokenViewBuilder
-
Returns the break type
License requirements: None.
- breakVisibility() - Method in interface nxopen.drawings.BrokenViewBuilder
-
Returns the view break visibilitity
License requirements: None.
- breakWaveLink() - Method in interface nxopen.assemblies.RelinkerBuilder
-
Returns the option to break WAVE links.
- Brep - Interface in nxopen.features
-
Represents an unparameterized feature
An unparameterized feature is obtained from an existing feature.
- brep() - Method in interface nxopen.UFSession
-
- BRIDGE - Static variable in class nxopen.tooling.MWDesignPartingSurfaceBuilder.TransitionSurfaceType
-
Bridge transition surface
- BRIDGE_GAP - Static variable in class nxopen.facet.FillHoleBuilder.Types
-
Bridges some open boundary edges with a linear fill.
- BridgeCurve - Interface in nxopen.features
-
Represents a bridge curve feature
To create or edit an instance of this class, use
BridgeCurveBuilderEx
Created in NX5.0.0
- BridgeCurveBuilder - Interface in nxopen.features
-
- BridgeCurveBuilder.ConstraintTypes - Class in nxopen.features
-
Deprecated.
This enum represents the end continuity constraint types for the bridge curve
- BridgeCurveBuilder.CurveDirectionTypes - Class in nxopen.features
-
Deprecated.
This enum represents the direction type for input curves
- BridgeCurveBuilder.CurveFitTypes - Class in nxopen.features
-
Deprecated.
This enum represents the curve fit types for the bridge curve
- BridgeCurveBuilder.EndObjectTypes - Class in nxopen.features
-
Deprecated.
This enum represents the current selected end object types for the bridge curve
- BridgeCurveBuilder.MinRadiusTypes - Class in nxopen.features
-
Deprecated.
This enum represents the minimum radius types for the bridge curve
- BridgeCurveBuilder.SelectedObject - Class in nxopen.features
-
Deprecated.
This enum represents the current selected object for the bridge curve
- BridgeCurveBuilder.ShapeControlTypes - Class in nxopen.features
-
Deprecated.
This enum represents the shape control types for the bridge curve
- BridgeCurveBuilder.SurfaceDirectionTypes - Class in nxopen.features
-
Deprecated.
This enum represents the direction type for input surfaces
- BridgeCurveBuilderEx - Interface in nxopen.features
-
- BridgeCurveBuilderEx.EndObjectTypes - Class in nxopen.features
-
End object type
- BridgeCurveBuilderEx.RadiusConstraintMethods - Class in nxopen.features
-
Radius constraint methods
- BridgeCurveBuilderEx.ShapeControlMethods - Class in nxopen.features
-
Shape control methods
- BridgeCurveBuilderEx.StartObjectTypes - Class in nxopen.features
-
Start object type
- BridgeCurveConnectivity - Interface in nxopen.geometricutilities
-
- BridgeCurveConnectivity.CurveDirectionOptions - Class in nxopen.geometricutilities
-
Tangent constraint direction when end is attached to a section
- BridgeCurveConnectivity.FaceDirectionOptions - Class in nxopen.geometricutilities
-
Tangent constraint direction when end is attached to a face
- BridgeData() - Constructor for class nxopen.uf.UFCurve.BridgeData
-
- BridgeData(UFCurve.BridgeMethod, UFModl.StringList, UFModl.StringList, String[], Tag[], boolean[], String, String, int, UFModl.StringList) - Constructor for class nxopen.uf.UFCurve.BridgeData
-
- bridgedGapSize() - Method in interface nxopen.features.ProjectCurveBuilder
-
Returns the maximum bridged gap size.
- bridgeEdges1() - Method in interface nxopen.facet.FillHoleBuilder
-
Returns the first list of edges when bridging holes.
- bridgeEdges2() - Method in interface nxopen.facet.FillHoleBuilder
-
Returns the second list of edges when bridging holes.
- BridgeFacetBodyBuilder - Interface in nxopen.facet
-
- BridgeFacetBodyBuilder.Input - Class in nxopen.facet
-
Represents the option for keeping, deleting or hiding input two facet bodies after builder committing
- BridgeFacetBodyBuilder.SmoothTypes - Class in nxopen.facet
-
Represents the smoothness type for the inserted new facets
- bridgeGap() - Method in interface nxopen.tooling.TraverseLoopBuilder
-
Returns the option to bridge gap or not.
- BridgeSurface - Interface in nxopen.features
-
Represents a bridge surface feature
To create or edit an instance of this class, use
BridgeSurfaceBuilder
Created in NX8.0.0
- BridgeSurfaceBuilder - Interface in nxopen.features
-
- BridgeTransition - Interface in nxopen.features
-
Represents a bridge transition feature
To create or edit an instance of this class, use
BridgeTransitionBuilder
Created in NX5.0.2
- BridgeTransitionBuilder - Interface in nxopen.features.sheetmetal
-
- BridgeTransitionBuilder.InsetOptions - Class in nxopen.features.sheetmetal
-
Enum representing the side of the Bridge Transition material with respect to
the specified tangent plane.
- BridgeTransitionBuilder.TypeOptions - Class in nxopen.features.sheetmetal
-
Enum representing types for Bridge Transition feature.
- BridgeTransitionBuilder.WidthDirectionOptions - Class in nxopen.features.sheetmetal
-
Enum representing the width direction for the Bridge Transition.
- BridgeTransitionBuilder.WidthOptions - Class in nxopen.features.sheetmetal
-
Enum representing width option types for Bridge Transition feature.
- BRIEF - Static variable in class nxopen.cae.NodeElementInfoBuilder.PropertyType
-
no property
- BRIEFCASE - Static variable in class nxopen.issue.IssueManager.Mode
-
Briefcase mode
- briefDescription - Variable in class nxopen.RuleManager.FunctionInformation
-
Brief description of function
- brLength - Variable in class nxopen.uf.UFNxsm.FlangeData
-
- BROKEN - Static variable in class nxopen.assemblies.RelinkerBuilder.LinkType
-
Indicate relink browser type is broken only
- BROKEN - Static variable in class nxopen.routing.Run.Status
-
Run is broken.
- BROKEN_LINK - Static variable in class nxopen.features.SketchConversionStatus.ReasonType
-
The linked feature curves have been converted with no constraints, because the selected feature has a broken link
- BROKEN_LINK_NULL_XFORM - Static variable in class nxopen.features.SketchConversionStatus.ReasonType
-
The linked feature is missing some linking data and will be treated as a broken link.
- BrokenViewBuilder - Interface in nxopen.drawings
-
- BrokenViewBuilder.BreakLineStyle - Class in nxopen.drawings
-
Break Line Type
- BrokenViewBuilder.HorizontalBreakSide - Class in nxopen.drawings
-
Which side to remove in case of vertical single-sided break.
- BrokenViewBuilder.LineWidth - Class in nxopen.drawings
-
Line Width
- BrokenViewBuilder.TypeBreak - Class in nxopen.drawings
-
Specifies whether the break is two-sided (regular) or one-sided.
- BrokenViewBuilder.TypeDirection - Class in nxopen.drawings
-
Direction Enum
- BrokenViewBuilder.VerticalBreakSide - Class in nxopen.drawings
-
Which side to remove in case of horizontal single-sided break.
- BROWN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- BROWSABLE - Static variable in class nxopen.Selection.SelectionFeatureType
-
Select all browsable features
- BROWSER_UPDATE - Static variable in class nxopen.assemblies.AssembliesEventTypes
-
update all relations in the browser event
- brType - Variable in class nxopen.uf.UFNxsm.FlangeData
-
- brWidth - Variable in class nxopen.uf.UFNxsm.FlangeData
-
- bselfromrecommendedgroup - Variable in class nxopen.uf.UFModl.ShapePatternClientDialogData
-
- BSP - Static variable in class nxopen.cam.DrillThreadMillToolBuilder.ToolFormTypeTypes
-
BSP
- BSP - Static variable in class nxopen.cam.fbm.ThreadFeatureGeometry.Form
-
Form: BSP
- BSP - Static variable in class nxopen.cam.HoleBossGeom.FormTypes
-
Form: BSP
- bsphereRadius() - Method in interface nxopen.cae.CfdLocalResolutionConstraintBuilder
-
Returns the bsphere radius
License requirements: None.
- bsplineTol() - Method in interface nxopen.Step203Creator
-
Returns the bspline tolerance
License requirements: None.
- bsplineTol() - Method in interface nxopen.Step214Creator
-
Returns the bspline tolerance
License requirements: None.
- BSTP - Static variable in class nxopen.cam.DrillThreadMillToolBuilder.ToolFormTypeTypes
-
BSTP
- BSTP - Static variable in class nxopen.cam.fbm.ThreadFeatureGeometry.Form
-
Form: BSTP
- BSTP - Static variable in class nxopen.cam.HoleBossGeom.FormTypes
-
Form: BSTP
- BSURFACE - Static variable in class nxopen.preferences.SessionModeling.FreeFormConstructionResultType
-
Indicates the construction result option is B Surface
- Bsurface() - Constructor for class nxopen.uf.UFModl.Bsurface
-
- Bsurface(int, int, int, int, int, double[], double[], double[][]) - Constructor for class nxopen.uf.UFModl.Bsurface
-
- BSURFACE_ALONG_DRIVER_NORMALS - Static variable in class nxopen.uf.UFModl.QuiltType
-
- BSURFACE_ALONG_FIXED_VECTOR - Static variable in class nxopen.uf.UFModl.QuiltType
-
- BSURFACE_GEOM - Static variable in class nxopen.uf.UFBrep.GeomType
-
- BSURFACE_POLES - Static variable in class nxopen.features.PointSetBuilder.FacePointsType
-
Points will be created at surface poles.
- bsurfaceExtractionOption() - Method in interface nxopen.features.IFormBuilder
-
Returns the b-surface extraction option
License requirements: None.
- BSURFACES - Static variable in class nxopen.IgesCreator.MapRevolvedFacesOption
-
export revolved faces as b-surfaces
- bsurfId - Variable in class nxopen.uf.UFModlGeneral.Cre2dtrimBsurfData
-
- bsurfId - Variable in class nxopen.uf.UFModlGeneral.CreTrimBsurfData
-
- bsurfObjId - Variable in class nxopen.uf.UFModlGeneral.CreateBsurfData
-
- BsurfRowInfo() - Constructor for class nxopen.uf.UFModl.BsurfRowInfo
-
- BsurfRowInfo(int, double[], double[]) - Constructor for class nxopen.uf.UFModl.BsurfRowInfo
-
- bType - Variable in class nxopen.uf.UFSf.AskNodeData
-
- BUBBLE - Static variable in class nxopen.cae.Post.StreamlineStyle
-
- bubbleTimestep - Variable in class nxopen.cae.Post.Streamline
-
- BUCKLING - Static variable in class nxopen.cae.BaseIteration.IterationType
-
Buckling Analysis Iteration
- BUCKLING - Static variable in class nxopen.cae.Result.SolutionType
-
Buckling
- BUD - Static variable in class nxopen.cae.Result.Filetype
-
- bufferObjects(CAMSetup.View, CAMObject[]) - Method in interface nxopen.cam.CAMSetup
-
Buffer objects to the clipboard and prepare for copy later
License requirements: cam_base ("CAM BASE")
.
- bufferObjects(CAMSetup.View, CAMObject[]) - Method in interface nxopen.cam.InspectionSetup
-
Buffer objects to the clipboard and prepare for copy later
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- bufferRadiusFactor() - Method in interface nxopen.motion.BodyContactRecurdyn
-
- bufferRadiusFactor() - Method in interface nxopen.motion.CurveContactRecurdyn
-
- bufferRadiusFactorExpression() - Method in interface nxopen.motion.BodyContactRecurdyn
-
Returns the Buffer Radius Factor expression
License requirements: None.
- bufferRadiusFactorExpression() - Method in interface nxopen.motion.CurveContactRecurdyn
-
Returns the Buffer Radius Factor expression
License requirements: None.
- buildAllConstraints() - Method in interface nxopen.optimization.OptimizationBuilder
-
Build all the constraints
License requirements: None.
- buildAllObjectives() - Method in interface nxopen.optimization.DesignStudyBuilder
-
Build all the objectives
License requirements: None.
- buildAllObjectives() - Method in interface nxopen.optimization.OptimizationBuilder
-
Build all the objectives
License requirements: None.
- buildAllVariables() - Method in interface nxopen.optimization.DesignStudyBuilder
-
Build all the variables
License requirements: None.
- buildAllVariables() - Method in interface nxopen.optimization.OptimizationBuilder
-
Build all the variables
License requirements: None.
- buildClonePartItems() - Method in interface nxopen.tooling.CloneObject
-
Builds the cloned part name (item id, item name, revision id) etc.
- buildColoredRegion(FacetedBody, int, int) - Method in interface nxopen.geometricutilities.ColorCodedRegionBuilder
-
Build Colored Region
License requirements: None.
- buildEndTaper() - Method in interface nxopen.die.DrawBeadBuilder
-
Returns the indication if the taper at the end of the bead should be built.
- Builder - Interface in nxopen
-
A Builder is an object that is used to create and edit other objects.
- builder() - Method in interface nxopen.drafting.DrawingAutomationWizard
-
Returns the drawing automation wizard builder
License requirements: None.
- builderType() - Method in interface nxopen.mechatronics.ProxyObjectBuilder
-
Returns the use type of this builder.
- buildFabrication(String, NXObject[], CharacteristicList) - Method in interface nxopen.routing.RouteManager
-
Creates a Routing fabrication, a sub-assembly made of
Component
s and
Stock
from the assembly in which
the Routing Fabrication is created.
- buildFabrication(String, NXObject[], CharacteristicList, CharacteristicList) - Method in interface nxopen.routing.RouteManager
-
Creates a Routing fabrication, a sub-assembly made of
Component
s and
Stock
from the assembly in which
the Routing Fabrication is created.
- buildMotionTemplate() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Open the motion simulation and build the motion template.
- buildNumber - Variable in class nxopen.uf.UFPs.KernelVersion
-
- buildProfileFromSections(boolean, MeshProfileString.Type, MeshParameterData.FeatureType, MeshProfileString.SelectedPoint, Section[], boolean, MeshProfileString) - Method in interface nxopen.features.MeshSurfaceBuilder
-
Creates mesh surface profile string.
- buildStartTaper() - Method in interface nxopen.die.DrawBeadBuilder
-
Returns the indication if the taper at the start of the bead should be built.
- buildStatus() - Method in interface nxopen.die.CastReliefParentBuilder
-
Returns the build status of cast relief.
- buildStatus() - Method in interface nxopen.die.ConnectProfileParentBuilder
-
Returns the build status of die connecting profiles
License requirements: ug_die_design ("Die Design")
.
- buildStatus() - Method in interface nxopen.die.DeckParentBuilder
-
Returns the build status of deck.
- buildStatus() - Method in interface nxopen.die.DrawDiePunchSectionBuilder
-
Returns the build status of the draw die punch casting.
- buildStatus() - Method in interface nxopen.die.FlangeSteelRibChildBuilder
-
Returns the build status of the Flange Steel Rib
License requirements: ug_die_design ("Die Design")
.
- buildStatus() - Method in interface nxopen.die.FlangeSteelRibParentBuilder
-
Returns the build status of the Flange Steel Ribs
License requirements: ug_die_design ("Die Design")
.
- buildStatus() - Method in interface nxopen.die.HandlingCoreChildBuilder
-
Returns the build status of the handling core.
- buildStatus() - Method in interface nxopen.die.HandlingCoreParentBuilder
-
Returns the build status of handling cores.
- buildStatus() - Method in interface nxopen.die.HoleChildBuilder
-
Returns the build status of the die hole.
- buildStatus() - Method in interface nxopen.die.HoleParentBuilder
-
Returns the build status of die holes.
- buildStatus() - Method in interface nxopen.die.KeywayChildBuilder
-
Returns the build status of the keyway.
- buildStatus() - Method in interface nxopen.die.KeywayParentBuilder
-
Returns the build status of keyways.
- buildStatus() - Method in interface nxopen.die.PadChildBuilder
-
Returns the build status of the die pad.
- buildStatus() - Method in interface nxopen.die.PadParentBuilder
-
Returns the build status of die pads.
- buildStatus() - Method in interface nxopen.die.PierceHoleChildBuilder
-
Returns the build status of the pierce hole
License requirements: ug_die_design ("Die Design")
.
- buildStatus() - Method in interface nxopen.die.PierceHoleParentBuilder
-
Returns the build status of pierce holes
License requirements: ug_die_design ("Die Design")
.
- buildStatus() - Method in interface nxopen.die.PointChildBuilder
-
Returns the build status of the point.
- buildStatus() - Method in interface nxopen.die.PointParentBuilder
-
Returns the build status of points.
- buildStatus() - Method in interface nxopen.die.PressureSystemChildBuilder
-
Returns the build status of the pressure system.
- buildStatus() - Method in interface nxopen.die.PressureSystemParentBuilder
-
Returns the build status of pressure systems.
- buildStatus() - Method in interface nxopen.die.RibChildBuilder
-
Returns the build status of the die rib.
- buildStatus() - Method in interface nxopen.die.RibParentBuilder
-
Returns the build status of die ribs.
- buildStatus() - Method in interface nxopen.die.RotorSectionBuilder
-
Returns the build status of the die rotor casting
License requirements: ug_die_design ("Die Design")
.
- buildStatus() - Method in interface nxopen.die.SteelInsertSegmentChildBuilder
-
Returns the build status of die sisegs
License requirements: ug_die_design ("Die Design")
.
- buildStatus() - Method in interface nxopen.die.SteelInsertSegmentParentBuilder
-
Returns the build status of die sisegs
License requirements: ug_die_design ("Die Design")
.
- buildStatus() - Method in interface nxopen.die.ThroatChildBuilder
-
Returns the build status of the throat section.
- buildStatus() - Method in interface nxopen.die.ThroatParentBuilder
-
Returns the build status of the throat sections.
- buildStatus() - Method in interface nxopen.die.WearPlateLocChildBuilder
-
Returns the build status of wear plate and locators
License requirements: ug_die_design ("Die Design")
.
- buildStatus() - Method in interface nxopen.die.WearPlateLocParentBuilder
-
Returns the build status of wear plate and locators
License requirements: ug_die_design ("Die Design")
.
- BUILT_UP - Static variable in class nxopen.features.shipdesign.PillarBuilder.StockSectionType
-
Built Up Stock
- BUILT_UP - Static variable in class nxopen.features.shipdesign.PillarSystemBuilder.StockSectionType
-
Built Up Stock
- BUILT_UP - Static variable in class nxopen.features.shipdesign.SplitProfilePlateBuilder.ProfileType
-
Select built-up as target for split.
- BUILT_UP - Static variable in class nxopen.features.shipdesign.StiffenerStockBuilder.StockSectionType
-
Built Up Stock
- BuiltInPath - Interface in nxopen.routing
-
The Routing BuiltInPath object stores a set of curves.
- BuiltInPathCollection - Interface in nxopen.routing
-
- builtInPaths() - Method in interface nxopen.routing.RouteManager
-
BuiltInPath collection .
- builtUpBlock() - Method in interface nxopen.features.shipdesign.PillarBuilder
-
Returns the list of Seams
License requirements: None.
- BuiltUpBlockBuilder - Interface in nxopen.features.shipdesign
-
- builtupComps() - Method in interface nxopen.features.shipdesign.BuiltUpManModeBuilder
-
Returns the components for which the Manufacturing Mode will be set
License requirements: None.
- builtupManMode() - Method in interface nxopen.features.shipdesign.BuiltUpManModeBuilder
-
Returns the builtup Manufactirng Mode
License requirements: None.
- BuiltUpManModeBuilder - Interface in nxopen.features.shipdesign
-
This class allows you to set the NX Ship BuiltUp Profile Manufacturing Mode for
one or more components.
- BuiltUpManModeBuilder.BuiltUpManModeType - Class in nxopen.features.shipdesign
-
This enum defines the allowable values for the BuiltUp Profile Manufacturing Mode which
may be either "Cut To Shape" or "Bend After Join".
- builtUpOffset() - Method in interface nxopen.features.shipdesign.SeamBuilder
-
Returns the built-up offset data.
- builtUpOffset() - Method in interface nxopen.features.shipdesign.ShipTrimBodyBuilder
-
Returns the builder used to define the offsets for a built-up trim.
- builtUpOffset() - Method in interface nxopen.features.shipdesign.SplitProfilePlateBuilder
-
Returns the built-up offset data
License requirements: nx_ship_detail ("Ship Detail Design")
.
- BuiltUpOffsetBuilder - Interface in nxopen.features.shipdesign
-
Represents a
BuiltUpOffsetBuilder
.This class is for splitting ship built-up solidbodies
Created in NX9.0.0
- builtUpPillarStock() - Method in interface nxopen.features.shipdesign.EditStockBuilder
-
Returns the stock data used to define the built up stock information of the pillar.
- builtUpSeams() - Method in interface nxopen.features.shipdesign.BuiltUpBlockBuilder
-
Returns the built up seams
License requirements: None.
- builtUpStock() - Method in interface nxopen.features.shipdesign.BuiltUpBlockBuilder
-
Returns the stock used to build the builtUp from.
- builtUpStock() - Method in interface nxopen.features.shipdesign.PillarSystemBuilder
-
Returns the stock used to build the builtUp from.
- builtUpStockData() - Method in interface nxopen.features.shipdesign.StiffenerStockBuilder
-
Returns the built-up stock data
License requirements: None.
- BULK_CONVECTION_COEFFICIENT - Static variable in class nxopen.cae.Result.Quantity
-
- BULK_HEADS - Static variable in class nxopen.annotations.FrameBarElements
-
- bulkheadEnum() - Method in interface nxopen.features.shipdesign.ShipIntersectionsBuilder
-
Returns the output option for the Bulkhead Frames
License requirements: None.
- bulkHeadList() - Method in interface nxopen.features.shipdesign.BulkHeadsBuilder
-
Returns the bulkHead list.
- BulkHeadListItemBuilder - Interface in nxopen.features.shipdesign
-
- BulkHeadListItemBuilderList - Interface in nxopen.features.shipdesign
-
Represents a list of objects.
- bulkHeadName() - Method in interface nxopen.features.shipdesign.BulkHeadListItemBuilder
-
Returns the bulkhead name.
- bulkHeads() - Method in interface nxopen.annotations.BaseFrameBarBuilder
-
Returns the bulk heads
License requirements: None.
- BULKHEADS - Static variable in class nxopen.annotations.ShipDimensionBuilder.GroupType
-
Group type Bulkheads
- BulkHeads - Interface in nxopen.features.shipdesign
-
Represents a bulk head feature
To create or edit an instance of this class, use
BulkHeadsBuilder
Created in NX5.0.0
- BULKHEADS - Static variable in class nxopen.features.shipdesign.ShipSectionBuilder.XFilter
-
- BulkHeadsBuilder - Interface in nxopen.features.shipdesign
-
- BulkHeadsBuilder.BulkheadType - Class in nxopen.features.shipdesign
-
Represents the bulkhead type.
- bulkHeadsLabelColor() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the label color
License requirements: None.
- bulkHeadsLabelFont() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the label font
License requirements: None.
- bulkHeadsLabelItalicized() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the label italicized
License requirements: None.
- bulkHeadsLabelName() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the bulk heads label name
License requirements: None.
- bulkHeadsLabelWidth() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the label width
License requirements: None.
- bulkHeadsStyle() - Method in interface nxopen.annotations.FrameBarStyleBuilder
-
Returns the style bulk heads
License requirements: None.
- bulkHeadsTicColor() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the tic color
License requirements: None.
- bulkHeadsTicDisplay() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the bulk heads tic display type
License requirements: None.
- bulkHeadsTicFont() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the tic font
License requirements: None.
- bulkHeadsTicLength() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the tic length
License requirements: None.
- bulkHeadsTicWidth() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the tic width
License requirements: None.
- bulkModulusFromPoissonLame(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the bulk modulus from poisson ratio and 1st Lame constant.
- bulkModulusFromShearLame(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the bulk modulus from shear modulus and 1st Lame constant.
- bulkModulusFromShearPoisson(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the bulk modulus from shear modulus and poisson ratio.
- bulkModulusFromYoungsLame(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the bulk modulus from youngs modulus and 1st Lame constant.
- bulkModulusFromYoungsPoisson(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the bulk modulus from youngs modulus and poisson ratio.
- bulkModulusFromYoungsShear(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the bulk modulus from youngs modulus and shear modulus.
- BumperPendulum - Interface in nxopen.features.vehicledesign
-
Represents a bumper pendulum feature
To create or edit an instance of this class, use
BumperPendulumBuilder
Created in NX8.5.0
- BumperPendulumBuilder - Interface in nxopen.features.vehicledesign
-
Represents a
BumperPendulum
builder
To create a new instance of this class, use
nxopen.features.vehicledesignCollection#createBumperPendulumBuilder
Default values.
- BumperPendulumBuilder.RequirementsControlType - Class in nxopen.features.vehicledesign
-
Represents the requirements control types to define the bumper pendulum.
- BumperPendulumBuilder.VisualizationType - Class in nxopen.features.vehicledesign
-
Represents the visualization types of the output.
- BUNDLE_DIAMETER - Static variable in class nxopen.routing.electrical.ElectricalStockDevice.AutoRouteSel
-
- bundleColor() - Method in interface nxopen.preferences.RoutingElectrical
-
Returns the default bundle color.
- BUNDLED - Static variable in class nxopen.routing.StockDataType
-
Generated (or used ) by bundling.
- BUNDLED - Static variable in class nxopen.routing.StockUse
-
Legacy Stock that was generated by the bundling algorithm
- bundlesUsed - Variable in class nxopen.uf.UF.SystemInfo
-
- BURRING - Static variable in class nxopen.tooling.ForceCalculationBuilder.ProcessTypes
-
burring
- BURRING - Static variable in class nxopen.tooling.QuickQuotationBuilder.ObjectTypes
-
sheet body is burring
- BURRING - Static variable in class nxopen.tooling.UniversalUnformBuilder.BendTypes
-
burring type
- BURRING_DIE - Static variable in class nxopen.tooling.BurringInsertBuilder.DesignOptions
-
design the burring die
- BURRING_DOWNWARDS - Static variable in class nxopen.tooling.BurringInsertBuilder.BurringDirections
-
design the burring downwards
- BURRING_PUNCH - Static variable in class nxopen.tooling.BurringInsertBuilder.DesignOptions
-
design the burring punch
- BURRING_UPWARDS - Static variable in class nxopen.tooling.BurringInsertBuilder.BurringDirections
-
design the burring upwards
- burringColor() - Method in interface nxopen.tooling.QuickQuotationBuilder
-
Returns the burring color.
- burringDirection() - Method in interface nxopen.tooling.BurringInsertBuilder
-
Returns the burring direction downwards or upwards.
- burringInsert() - Method in interface nxopen.tooling.ToolingManager
-
Returns the BuringInsertCollection instance belonging to this part .
- BurringInsertBuilder - Interface in nxopen.tooling
-
- BurringInsertBuilder.BurringDirections - Class in nxopen.tooling
-
Specifies the burring direction.
- BurringInsertBuilder.BurringPunchTypes - Class in nxopen.tooling
-
Specifies the burring punch type.
- BurringInsertBuilder.CircularOrNonCircularType - Class in nxopen.tooling
-
Specifies the circular or non-circular type.
- BurringInsertBuilder.DesignOptions - Class in nxopen.tooling
-
Specifies the design type.
- BurringInsertBuilder.ParentTypes - Class in nxopen.tooling
-
Specifies the parent part type.
- BurringInsertCollection - Interface in nxopen.tooling
-
- burringPunchType() - Method in interface nxopen.tooling.BurringInsertBuilder
-
Returns the burring punch type to create.
- BUS_MODFR_CUSTOMER_VALUE_TYPE - Static variable in class nxopen.uf.UFPd.BusModfrType
-
- BUS_MODFR_LIST_TYPE - Static variable in class nxopen.uf.UFPd.BusModfrType
-
- BUS_MODFR_REVISION_TYPE - Static variable in class nxopen.uf.UFPd.BusModfrType
-
- BUS_MODFR_SAFETY_CLASS_TYPE - Static variable in class nxopen.uf.UFPd.BusModfrType
-
- BUS_MODFR_STRING_TYPE - Static variable in class nxopen.uf.UFPd.BusModfrType
-
- BUS_MODFR_URL_TYPE - Static variable in class nxopen.uf.UFPd.BusModfrType
-
- Bushing - Interface in nxopen.motion
-
Represents a bushing
To create or edit an instance of this class, use
BushingBuilder
Created in NX6.0.0
- BushingBuilder - Interface in nxopen.motion
-
- BushingBuilder.BushingTypes - Class in nxopen.motion
-
Definitions of bushing type
- bushingCoefficients() - Method in interface nxopen.motion.BushingBuilder
-
Returns the bushing coefficients
License requirements: None.
- BushingCoefficients - Interface in nxopen.motion
-
Represents a Motion BushingCoefficients
.
- BushingCollection - Interface in nxopen.motion
-
Represents a collection of motion joints
To obtain an instance of this class, refer to
MotionManager
Created in NX6.0.0
- BushingCylindricalCoefficients - Interface in nxopen.motion
-
Represents a Motion BushingCylindricalCoefficients
.
- BushingCylindricalCoefficientsComponent - Interface in nxopen.motion
-
Represents a Motion BushingCylindricalCoefficientsComponent
.
- BushingCylindricalCoefficientTypes - Class in nxopen.motion
-
Definitions of bushing cylindrical coefficient component type
- bushingDefine() - Method in interface nxopen.motion.BushingBuilder
-
Returns the bushing define
License requirements: None.
- BushingDefine - Interface in nxopen.motion
-
Represents a Motion BushingDefine .
- BushingDefine.OrientationTypes - Class in nxopen.motion
-
Defines the orientation type of bushing
- BushingEADBuilder - Interface in nxopen.cae
-
- BushingEADBuilder.OrientationMethod - Class in nxopen.cae
-
indicates which orientation method to use
- BushingEADBuilder.State - Class in nxopen.cae
-
indicates to ignore, apply or clear the state property upon commit
- BushingGeneralCoefficientMoveTypes - Class in nxopen.motion
-
Definitions move type of general type bushing coefficient
- BushingGeneralCoefficients - Interface in nxopen.motion
-
Represents a Motion BushingGeneralCoefficients
.
- BushingGeneralCoefficientsComponent - Interface in nxopen.motion
-
Represents a Motion BushingGeneralCoefficientsComponent
.
- BushingGeneralCoefficientTypes - Class in nxopen.motion
-
Definitions of bushing general coefficient component type
- bushingJointAsymmetric() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the option to specify whether or not the Bushing Joint is asymmetric.
- bushings() - Method in interface nxopen.motion.MotionManager
-
Returns the Motion.BushingCollection
belonging to this part
Created in NX3.0.0
- bushingType() - Method in interface nxopen.motion.BushingBuilder
-
Returns the type
License requirements: None.
- BusinessModifier - Interface in nxopen.annotations
-
Represents a business modifier object.
- businessModifier() - Method in interface nxopen.annotations.PmiAttributeBuilder
-
Returns the business modifier
License requirements: None.
- BusinessModifier() - Constructor for class nxopen.uf.UFPd.BusinessModifier
-
- BusinessModifier(String, String) - Constructor for class nxopen.uf.UFPd.BusinessModifier
-
- BusinessModifierCollection - Interface in nxopen.annotations
-
- businessModifiers() - Method in interface nxopen.annotations.AnnotationManager
-
BusinessModifier collection .
- busmods - Variable in class nxopen.uf.UFPd.ProductAttribute
-
- busmods - Variable in class nxopen.uf.UFPd.ProductAttribute2
-
- BUTT_WELD_WITH_RAISED_EDGES - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSymbolType
-
- BUTT_WITH_RAISED_EDGES - Static variable in class nxopen.annotations.Symbol
-
Specifies butt weld with raised edges
- buttColor() - Method in interface nxopen.weld.WeldJointBuilder
-
Returns the color for butt weld type joints
License requirements: None.
- buttColorFontWidth() - Method in interface nxopen.weld.WeldJointBuilder
-
Returns the color, font, and width of the butt joint curves.
- buttFont() - Method in interface nxopen.weld.WeldJointBuilder
-
Returns the curve font for butt weld type joints
License requirements: None.
- buttGap - Variable in class nxopen.uf.UFModl.SmcornerData
-
- BUTTOCK_KNEE_LENGTH - Static variable in class nxopen.HumanData.AdvancedScalingType
-
Indicate scaling of buttock_knee_length
- Button - Interface in nxopen.blockstyler
-
Represents a button .
- button() - Method in interface nxopen.die.QuickBinderWrapBuilder
-
Returns the button
License requirements: None.
- button1 - Variable in class nxopen.uf.UFUi.MessageButtons
-
- button2 - Variable in class nxopen.uf.UFUi.MessageButtons
-
- button3 - Variable in class nxopen.uf.UFUi.MessageButtons
-
- BUTTON_DOWN - Static variable in class nxopen.sim.SimDebugBuilder.TraceType
-
Trace Button Down
- BUTTON_LAYOUT - Static variable in class nxopen.uistyler.Dialog.ItemType
-
- BUTTON_LAYOUT - Static variable in class nxopen.uistyler.StylerItem.ItemType
-
Button Layout item
- BUTTON_SEPARATOR - Static variable in class nxopen.uf.UFUi.MenuType
-
- buttonCutout() - Method in interface nxopen.features.shipdesign.PenetrationAssociationBuilder
-
Used to open the cutout dialog
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- buttonDiameterBuilder() - Method in interface nxopen.cam.TurnToolBuilder
-
Returns the button diameter builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- buttonId() - Method in interface nxopen.menubar.MenuButton
-
Returns the identifier of the button.
- ButtonLayout - Interface in nxopen.uistyler
-
Represents a Button Layout for UI Styler.
- ButtonLayout.Activate - Interface in nxopen.uistyler
-
Called when a dialog user clicks on a push button or presses the spacebar when a push
button has keyboard focus.
- buttonName() - Method in interface nxopen.menubar.MenuButton
-
Returns the name of the button.
- buttonOpenInformationWindow() - Method in interface nxopen.geometricanalysis.LocalRadiusAnalysisBuilder
-
TODO: fill in a description for this
License requirements: None.
- buttonSensitivity() - Method in interface nxopen.menubar.MenuButton
-
Returns the sensitivity of the button.
- buttonType() - Method in interface nxopen.menubar.MenuButton
-
Returns the type of the button.
- buttonTypeName() - Method in interface nxopen.menubar.MenuButton
-
Returns the type name of the button.
- buttOverlap - Variable in class nxopen.uf.UFModl.SmcornerData
-
- BUTTRESS - Static variable in class nxopen.cam.DrillThreadMillToolBuilder.ToolFormTypeTypes
-
Buttress
- BUTTRESS - Static variable in class nxopen.cam.fbm.ThreadFeatureGeometry.Form
-
Form: Buttress
- BUTTRESS - Static variable in class nxopen.cam.HoleBossGeom.FormTypes
-
Form: Buttress
- buttWidth() - Method in interface nxopen.weld.WeldJointBuilder
-
Returns the curve with for butt weld type joints
License requirements: None.
- BWI - Static variable in class nxopen.cae.DurabilityDamageEvaluationBuilder.FatigueLifeCriterionEnum
-
- BWI - Static variable in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.FatigueLifeCriterionEnum
-
BWI
- bwiWeldClass() - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
Returns the bwi weld class.
- BY_ANGLE - Static variable in class nxopen.annotations.TextOrientation
-
Specifies dimension text at angle
- BY_ANGLE - Static variable in class nxopen.cae.MeshControlBuilder.CylinderCircularSizeType
-
- BY_ANGLES - Static variable in class nxopen.tooling.DieEngTrimAngleCheckBuilder.DirectionOptions
-
- BY_ANGULAR_LAW - Static variable in class nxopen.geometricutilities.OrientationMethodBuilder.OrientationOptions
-
Angular Law
- BY_ANOTHER_CURVE - Static variable in class nxopen.geometricutilities.OrientationMethodBuilder.OrientationOptions
-
Another Curve
- BY_ANOTHER_CURVE - Static variable in class nxopen.geometricutilities.ScalingMethodBuilder.ScalingOptions
-
Another Curve
- BY_APEX - Static variable in class nxopen.features.SectionSurfaceBuilderEx.SlopeControlType
-
slope control by apex
- BY_APOINT - Static variable in class nxopen.geometricutilities.OrientationMethodBuilder.OrientationOptions
-
A Point
- BY_APOINT - Static variable in class nxopen.geometricutilities.ScalingMethodBuilder.ScalingOptions
-
A Point
- BY_AREA_LAW - Static variable in class nxopen.geometricutilities.ScalingMethodBuilder.ScalingOptions
-
Area Law
- BY_BLENDING_FUNCTION - Static variable in class nxopen.geometricutilities.ScalingMethodBuilder.ScalingOptions
-
Blending Function
- BY_BOUNDING_OBJECTS - Static variable in class nxopen.features.DivideCurveBuilder.Types
-
By Bounding Objects
- BY_COLLISION - Static variable in class nxopen.cam.ToolPathSplitBuilder.SplitTypes
-
split at collisions
- BY_COLLISION - Static variable in class nxopen.cam.ToolPathSplitParametersBuilder.SplitTypes
-
split at collisions
- BY_COMPONENT - Static variable in class nxopen.annotations.PmiFilter.FilterType
-
Specifies a PMI filter defined by a set of components
- BY_COMPONENTS - Static variable in class nxopen.cae.NodeTranslateBuilder.MethodType
-
by components
- BY_CURVE - Static variable in class nxopen.features.GlobalShapingBuilder.DeformationTypeValues
-
(10)Bend/Twist by curves
- BY_CURVE - Static variable in class nxopen.features.SectionSurfaceBuilderEx.Spine
-
spine by curve
- BY_CURVES - Static variable in class nxopen.features.SectionSurfaceBuilderEx.SlopeControlType
-
slope control by curves
- BY_DELETING_EDGES - Static variable in class nxopen.features.PatchOpeningsBuilder.Types
-
Patch by deleting edges and growing faces
- BY_DIAMETER - Static variable in class nxopen.cam.MillingTrackpointBuilder.Types
-
By Diameter
- BY_DIRECTION - Static variable in class nxopen.cae.NodeProjectBuilder.ProjectionMethodType
-
By Direction
- BY_DISTANCE - Static variable in class nxopen.cae.MeshPointMultipleOnCurveBuilder.PlacementType
-
by distance
- BY_DISTANCE - Static variable in class nxopen.cae.NodesOnCurveBuilder.PlacementType
-
by distance
- BY_DISTANCE - Static variable in class nxopen.cae.WeldBuilder.PointOnEdgeType
-
Specify the distance between weld points created on an edge
- BY_DISTANCE - Static variable in class nxopen.cam.ToolPathDivideBuilder.PathDivideType
-
- BY_DISTANCE - Static variable in class nxopen.features.SectionInertiaAnalysisBuilder.SampleMethod
-
Sample according to Distance
- BY_DISTANCE - Static variable in class nxopen.features.shipdesign.OrientationPointMethodsBuilder.PointMethodTypes
-
The boundary is defined by a distance from a reference object.
- BY_DISTANCE - Static variable in class nxopen.features.TrimExtendBuilder.CreationTypes
-
By Distance
- BY_ECE_VISION_POINTS_FEATURE - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.EyePointMethodType
-
Represents using ECE Vision Point feature to get eye point
- BY_EQUATION - Static variable in class nxopen.geometricutilities.LawBuilder.Type
-
by equation law type
- BY_EVENTS - Static variable in class nxopen.cam.ToolPathDivideBuilder.PathDivideType
-
- BY_FACE_NORMALS - Static variable in class nxopen.geometricutilities.OrientationMethodBuilder.OrientationOptions
-
Face Normals
- BY_FACES - Static variable in class nxopen.features.SectionSurfaceBuilderEx.SlopeControlType
-
slope control by faces
- BY_FIELD - Static variable in class nxopen.cae.NodeTranslateBuilder.MethodType
-
by field
- BY_FILE - Static variable in class nxopen.cae.responsesimulation.DDAMExcitation.CoefficientDefinitionType
-
Get the DDAM coefficients from a DDAM coefficient file
- BY_FORCED_DIRECTION - Static variable in class nxopen.geometricutilities.OrientationMethodBuilder.OrientationOptions
-
Forced Direction
- BY_FUNCTION - Static variable in class nxopen.features.OvercrownBuilder.ControlType
-
- BY_HIP_POINT - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.EyePointMethodType
-
Represents using Hip Point to calculate the eye point
- BY_LAW_CURVE - Static variable in class nxopen.geometricutilities.LawBuilder.Type
-
by law curve law type
- BY_LENGTH - Static variable in class nxopen.features.ExtensionBuilder.Distance
-
Extend by length
- BY_NODE - Static variable in class nxopen.cae.BeamSectionOrientationOptions.Method
-
- BY_NUMBER - Static variable in class nxopen.cae.MeshControlBuilder.SizingType
-
- BY_NUMBER - Static variable in class nxopen.cae.MeshPointMultipleOnCurveBuilder.PlacementType
-
by number
- BY_NUMBER - Static variable in class nxopen.cae.NodesOnCurveBuilder.PlacementType
-
by number
- BY_NUMBER - Static variable in class nxopen.cae.WeldBuilder.PointOnEdgeType
-
Specify the number of weld points to be created on an edge
- BY_NUMBER - Static variable in class nxopen.features.DivideCurveBuilder.CornerOption
-
By Number
- BY_NUMBER - Static variable in class nxopen.features.DivideCurveBuilder.KnotPointOption
-
By Number
- BY_NUMBER - Static variable in class nxopen.features.SectionInertiaAnalysisBuilder.SampleMethod
-
Sample according to Number of slices
- BY_NUMBER_OF_EDGES - Static variable in class nxopen.facet.FillHoleBuilder.TargetTypes
-
Automatically target holes based on number of edges.
- BY_OFFSET - Static variable in class nxopen.cae.ElementModifyLabelBuilder.LabelType
-
by offset
- BY_OFFSET - Static variable in class nxopen.cae.NodeModifyLabelBuilder.LabelType
-
by offset
- BY_OFFSET - Static variable in class nxopen.cae.NodeReflectBuilder.LabelType
-
by offset
- BY_OFFSET - Static variable in class nxopen.cae.NodeRotateBuilder.LabelType
-
by offset
- BY_OFFSET - Static variable in class nxopen.cae.NodeTranslateBuilder.LabelType
-
by offset
- BY_ORDER - Static variable in class nxopen.mechatronics.ParameterStockBuilder.Assignment
-
By order
- BY_PATTERN - Static variable in class nxopen.cae.WeldBuilder.PointOnEdgeType
-
Specify the distance between weld points as a pattern
- BY_PERCENTAGE - Static variable in class nxopen.features.ExtensionBuilder.Distance
-
Extend by percentage
- BY_PERIMETER_LAW - Static variable in class nxopen.geometricutilities.ScalingMethodBuilder.ScalingOptions
-
Perimeter Law
- BY_PLANE - Static variable in class nxopen.geometricutilities.BoundingObjectBuilder.Method
-
By Plane
- BY_POINT - Static variable in class nxopen.features.shipdesign.OrientationPointMethodsBuilder.PointMethodTypes
-
The boundary is defined by a location on the landing curve closest to a specified point.
- BY_POINT - Static variable in class nxopen.geometricutilities.CurveExtensionBuilder.ExtensionOption
-
Extend up to a point
- BY_POINT - Static variable in class nxopen.geometricutilities.SplineExtensionBuilder.ExtensionOption
-
Extend up to a point
- BY_POINTS - Static variable in class nxopen.annotations.Centerline2dBuilder.Types
-
centerline by points
- BY_POINTS - Static variable in class nxopen.positioning.Constraint.SplineType
-
Spline points define interpolation/through points.
- BY_POINTS - Static variable in class nxopen.routing.SplineOptions
-
- BY_POLES - Static variable in class nxopen.features.StudioSplineBuilder.Method
-
Deprecated.
Spline by poles
- BY_POLES - Static variable in class nxopen.features.StudioSplineBuilderEx.Types
-
Spline by poles
- BY_POLES - Static variable in class nxopen.positioning.Constraint.SplineType
-
Spline points define control points.
- BY_POLES - Static variable in class nxopen.routing.SplineOptions
-
- BY_REVISION_RULE - Static variable in class nxopen.LoadOptions.ManagedModeLoadMethod
-
use the assembly structure configured by revision rule for load
- BY_RULE - Static variable in class nxopen.features.shipdesign.SectionViewBuilder.SectionRuleOptions
-
- BY_SENSOR - Static variable in class nxopen.cam.InspectionLinkPmiBuilder.PathOrderTypes
-
Path order optimization will use the by sensor method
- BY_SIZE - Static variable in class nxopen.cae.MeshControlBuilder.SizingType
-
- BY_SKETCH - Static variable in class nxopen.features.vehicledesign.TireEnvelopeBuilder.DriverGraphOption
-
Use a sketch to define the driver.
- BY_SUPPORT - Static variable in class nxopen.features.shipdesign.StiffenerSystemBuilder.Types
-
- BY_SUPPRESSION - Static variable in class nxopen.features.PatchOpeningsBuilder.Types
-
Patch by suppressing features
- BY_SURFACE - Static variable in class nxopen.features.GlobalShapingBuilder.DeformationTypeValues
-
(9) Old By surface method
- BY_SURFACE - Static variable in class nxopen.features.OvercrownBuilder.ControlType
-
- BY_SYSTEM - Static variable in class nxopen.features.MatchedReferenceBuilder.ResolvedStatus
-
system automatic resolve
- BY_TIME - Static variable in class nxopen.cam.ToolPathDivideBuilder.PathDivideType
-
- BY_TRANSFER - Static variable in class nxopen.cam.ToolPathSplitBuilder.SplitTypes
-
split between transfers
- BY_TRANSFER - Static variable in class nxopen.cam.ToolPathSplitParametersBuilder.SplitTypes
-
split between transfers
- BY_TYPE - Static variable in class nxopen.annotations.PmiFilter.FilterType
-
Specifies a PMI filter defined by a set of PMI types
- BY_USER - Static variable in class nxopen.features.MatchedReferenceBuilder.ResolvedStatus
-
resolve by user
- BY_UV - Static variable in class nxopen.features.StudioXformBuilderEx.ProportionalPoleControlType
-
Poles on U or V are moved
- BY_VALUE - Static variable in class nxopen.geometricutilities.CurveExtensionBuilder.ExtensionOption
-
Extend by value
- BY_VALUE - Static variable in class nxopen.geometricutilities.SplineExtensionBuilder.ExtensionOption
-
Extend by value
- BY_VALUE - Static variable in class nxopen.weld.FilletBuilder.EnumExtensionMethod
-
- BY_VECTOR - Static variable in class nxopen.cae.BeamSectionOrientationOptions.Method
-
- BY_VECTOR - Static variable in class nxopen.features.SectionSurfaceBuilderEx.Spine
-
spine by vector
- BY_VECTOR - Static variable in class nxopen.tooling.DieEngTrimAngleCheckBuilder.DirectionOptions
-
- BY_VECTOR_DIRECTION - Static variable in class nxopen.geometricutilities.OrientationMethodBuilder.OrientationOptions
-
Vector Direction
- BY_VIEW - Static variable in class nxopen.annotations.PmiFilter.FilterType
-
Specifies a PMI filter defined by a set of component model views
- byAboveText() - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
Returns the above text toggle
License requirements: None.
- byAfterText() - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
Returns the after text toggle
License requirements: None.
- byAngle() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
Returns the angle toggle
License requirements: None.
- byBeforeText() - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
Returns the before text toggle
License requirements: None.
- byBelowText() - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
Returns the below text toggle
License requirements: None.
- byCalloutType() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
Returns the callout type toggle
License requirements: None.
- byCharacteristic() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
Returns the characteristic toggle
License requirements: None.
- byCircleU() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
Returns the circle utoggle
License requirements: None.
- byCircleUValue() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
Returns the circle uvalue toggle
License requirements: None.
- byColor() - Method in interface nxopen.tooling.TraverseLoopBuilder
-
Returns a Traverse loop by following face color or not.
- byCounterboreDepth() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
Returns the counterboreDepth toggle
License requirements: None.
- byCounterboreDiameter() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
Returns the counterboreDiameter toggle
License requirements: None.
- byCountersinkAngle() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
Returns the countersinkAngle toggle
License requirements: None.
- byCountersinkDiameter() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
Returns the countersinkDiameter toggle
License requirements: None.
- byCurves() - Method in interface nxopen.die.AddendumSectionBuilder
-
Returns the curves used to approximate an addendum section.
- byCutoff() - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
Returns the cutoff toggle
License requirements: None.
- byDatumFeatureSymbolLabel() - Method in interface nxopen.annotations.SearchCriteriaDatumFeatureSymbolBuilder
-
Returns the datum feature symbol label toggle
License requirements: None.
- byDatumMovable() - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder
-
Returns the movable datum target option
License requirements: None.
- byDatumTargetLabel() - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder
-
Returns the datum target label toggle
License requirements: None.
- byDatumTargetType() - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder
-
Returns the datum target type toggle
License requirements: None.
- byDepth() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
Returns the depth toggle
License requirements: None.
- byDeviation() - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
Returns the deviation toggle
License requirements: None.
- byDiameter() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
Returns the diameter toggle
License requirements: None.
- byDiameterSymbol() - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
Returns the diameter symbol toggle
License requirements: None.
- byDimensionType() - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
Returns the dimension type toggle
License requirements: None.
- byDimensionValue() - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
Returns the dimension value toggle
License requirements: None.
- byFreeState() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
Returns the free state toggle
License requirements: None.
- byGrade() - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
Returns the grade toggle
License requirements: None.
- byHeight() - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder
-
Returns the height toggle
License requirements: None.
- byInnerDiameter() - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder
-
Returns the inner diameter toggle
License requirements: None.
- byLaySymbol() - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
Returns the lay symbol toggle
License requirements: None.
- byLowerText() - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
Returns the lower text toggle
License requirements: None.
- byLowerTolerance() - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
Returns the lower tolerance toggle
License requirements: None.
- byLowerTolerance() - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
Returns the lower tolerance toggle
License requirements: None.
- byMachining() - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
Returns the machining toggle
License requirements: None.
- byMachiningToleranceType() - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
Returns the tolerance type toggle
License requirements: None.
- byMaximum() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
Returns the maximum toggle
License requirements: None.
- byOuterDiameter() - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder
-
Returns the outer diameter toggle
License requirements: None.
- BYPASS - Static variable in class nxopen.features.GuidedExtensionBuilderEx.SegmentType
-
Bypass segment type
- BYPASS - Static variable in class nxopen.tooling.GuidedExtensionBuilder.SegmentType
-
Bypass segment type
- byPitch() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
Returns the pitch toggle
License requirements: None.
- byPrimaryDatum() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
- byPrimaryDatumDual() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
- byPrimaryDatumDualMCM() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
- byPrimaryDatumMCM() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
- byProductionProcess() - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
Returns the production process toggle
License requirements: None.
- byProjected() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
Returns the projected toggle
License requirements: None.
- byProjectedValue() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
Returns the projected value toggle
License requirements: None.
- byRadialSymbol() - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
Returns the radial symbol toggle
License requirements: None.
- byRoughness() - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
Returns the roughness toggle
License requirements: None.
- byScrewSize() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
Returns the screwSize toggle
License requirements: None.
- bySecondaryDatum() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
- bySecondaryDatumDual() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
- bySecondaryDatumDualMCM() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
- bySecondaryDatumMCM() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
- bySecondaryRoughness() - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
Returns the secondary roughness toggle
License requirements: None.
- byStatistical() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
Returns the statistical toggle
License requirements: None.
- bySurfaceFinishType() - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
Returns the surface finish type toggle
License requirements: None.
- byTangentPlane() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
Returns the tangent plane toggle
License requirements: None.
- byTaperAngle() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
Returns the taperAngle toggle
License requirements: None.
- byTertiaryDatum() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
- byTertiaryDatumDual() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
- byTertiaryDatumDualMCM() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
- byTertiaryDatumMCM() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
- byTertiaryRoughness() - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
Returns the option to decide if searching the surface finish by the tertiary roughness
License requirements: None.
- bytes - Variable in class nxopen.uf.UFClone.Base64ToBytesData
-
- byText() - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder
-
Returns the text toggle
License requirements: None.
- byText() - Method in interface nxopen.annotations.SearchCriteriaPMINotesBuilder
-
Returns the text toggle
License requirements: None.
- byThreadDepth() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
Returns the threadDepth toggle
License requirements: None.
- byThreadSize() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
Returns the threadSize toggle
License requirements: None.
- byTolerance() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
Returns the tolerance toggle
License requirements: None.
- byTolerance() - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
Returns the tolerance toggle
License requirements: None.
- byToleranceMCM() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
Returns the tolerance mcmtoggle
License requirements: None.
- byToleranceType() - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
Returns the tolerance type toggle
License requirements: None.
- byUpperText() - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
Returns the upper text toggle
License requirements: None.
- byUpperTolerance() - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
Returns the upper tolerance toggle
License requirements: None.
- byUpperTolerance() - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
Returns the upper tolerance toggle
License requirements: None.
- byWavinessText() - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
Returns the waviness text toggle
License requirements: None.
- byWidth() - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder
-
Returns the width toggle
License requirements: None.
- BYY - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
-
- byZoneShape() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
Returns the zone shape toggle
License requirements: None.
- BZ - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
-