A B C D E F G H I J K L M N O P Q R S T U V W X Y Z _

S

S - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSizeCodeType

S - Static variable in class nxopen.annotations.SizeLetterCode

Specifies size letter code "s"

S - Static variable in class nxopen.cam.TurnToolBuilder.HolderStyles

S-Style

S - Static variable in class nxopen.features.shipdesign.SectionViewBuilder.DirectionOptions

S101 - Static variable in class nxopen.drawings.DrawingSheetBuilder.SheetStandardMetricScale

a scale of 10:1

S101 - Static variable in class nxopen.features.shipdesign.ExpansionDrawingBuilder.JaExpansiondrawingbuilderMetricScale

a scale of 10:1

S105 - Static variable in class nxopen.display.CameraBuilder.LensFlare

105mm

S105 - Static variable in class nxopen.display.CameraBuilder.StockLens

105mm

S11 - Static variable in class nxopen.drawings.DrawingSheetBuilder.SheetStandardEnglishScale

a scale of 1:1

S11 - Static variable in class nxopen.drawings.DrawingSheetBuilder.SheetStandardMetricScale

a scale of 1:1

S11 - Static variable in class nxopen.features.shipdesign.ExpansionDrawingBuilder.JaExpansiondrawingbuilderEnglishScale

a scale of 1:1

S11 - Static variable in class nxopen.features.shipdesign.ExpansionDrawingBuilder.JaExpansiondrawingbuilderMetricScale

a scale of 1:1

S110 - Static variable in class nxopen.drawings.DrawingSheetBuilder.SheetStandardMetricScale

a scale of 1:10

S110 - Static variable in class nxopen.features.shipdesign.ExpansionDrawingBuilder.JaExpansiondrawingbuilderMetricScale

a scale of 1:10

S1100 - Static variable in class nxopen.drawings.DrawingSheetBuilder.SheetStandardMetricScale

a scale of 1:100

S1100 - Static variable in class nxopen.features.shipdesign.ExpansionDrawingBuilder.JaExpansiondrawingbuilderMetricScale

a scale of 1:100

S12 - Static variable in class nxopen.drawings.DrawingSheetBuilder.SheetStandardEnglishScale

a scale of 1:2

S12 - Static variable in class nxopen.drawings.DrawingSheetBuilder.SheetStandardMetricScale

a scale of 1:2

S12 - Static variable in class nxopen.features.shipdesign.ExpansionDrawingBuilder.JaExpansiondrawingbuilderEnglishScale

a scale of 1:2

S12 - Static variable in class nxopen.features.shipdesign.ExpansionDrawingBuilder.JaExpansiondrawingbuilderMetricScale

a scale of 1:2

S120 - Static variable in class nxopen.drawings.DrawingSheetBuilder.SheetStandardMetricScale

a scale of 1:20

S120 - Static variable in class nxopen.features.shipdesign.ExpansionDrawingBuilder.JaExpansiondrawingbuilderMetricScale

a scale of 1:20

S135 - Static variable in class nxopen.display.CameraBuilder.StockLens

135mm

S14 - Static variable in class nxopen.drawings.DrawingSheetBuilder.SheetStandardEnglishScale

a scale of 1:4

S14 - Static variable in class nxopen.features.shipdesign.ExpansionDrawingBuilder.JaExpansiondrawingbuilderEnglishScale

a scale of 1:4

S15 - Static variable in class nxopen.drawings.DrawingSheetBuilder.SheetStandardMetricScale

a scale of 1:5

S15 - Static variable in class nxopen.features.shipdesign.ExpansionDrawingBuilder.JaExpansiondrawingbuilderMetricScale

a scale of 1:5

S150 - Static variable in class nxopen.drawings.DrawingSheetBuilder.SheetStandardMetricScale

a scale of 1:50

S150 - Static variable in class nxopen.features.shipdesign.ExpansionDrawingBuilder.JaExpansiondrawingbuilderMetricScale

a scale of 1:50

S18 - Static variable in class nxopen.drawings.DrawingSheetBuilder.SheetStandardEnglishScale

a scale of 1:8

S18 - Static variable in class nxopen.features.shipdesign.ExpansionDrawingBuilder.JaExpansiondrawingbuilderEnglishScale

a scale of 1:8

S201 - Static variable in class nxopen.drawings.DrawingSheetBuilder.SheetStandardMetricScale

a scale of 20:1

S201 - Static variable in class nxopen.features.shipdesign.ExpansionDrawingBuilder.JaExpansiondrawingbuilderMetricScale

a scale of 20:1

S21 - Static variable in class nxopen.drawings.DrawingSheetBuilder.SheetStandardEnglishScale

a scale of 2:1

S21 - Static variable in class nxopen.drawings.DrawingSheetBuilder.SheetStandardMetricScale

a scale of 2:1

S21 - Static variable in class nxopen.features.shipdesign.ExpansionDrawingBuilder.JaExpansiondrawingbuilderEnglishScale

a scale of 2:1

S21 - Static variable in class nxopen.features.shipdesign.ExpansionDrawingBuilder.JaExpansiondrawingbuilderMetricScale

a scale of 2:1

S210 - Static variable in class nxopen.display.CameraBuilder.StockLens

210mm

S28 - Static variable in class nxopen.display.CameraBuilder.StockLens

28mm

S300 - Static variable in class nxopen.display.CameraBuilder.StockLens

300mm

S35 - Static variable in class nxopen.display.CameraBuilder.LensFlare

35mm

S35 - Static variable in class nxopen.display.CameraBuilder.StockLens

35mm

S41 - Static variable in class nxopen.drawings.DrawingSheetBuilder.SheetStandardEnglishScale

a scale of 4:1

S41 - Static variable in class nxopen.features.shipdesign.ExpansionDrawingBuilder.JaExpansiondrawingbuilderEnglishScale

a scale of 4:1

S50 - Static variable in class nxopen.display.CameraBuilder.LensFlare

50mm

S50 - Static variable in class nxopen.display.CameraBuilder.StockLens

50mm

S501 - Static variable in class nxopen.drawings.DrawingSheetBuilder.SheetStandardMetricScale

a scale of 50:1

S501 - Static variable in class nxopen.features.shipdesign.ExpansionDrawingBuilder.JaExpansiondrawingbuilderMetricScale

a scale of 50:1

S51 - Static variable in class nxopen.drawings.DrawingSheetBuilder.SheetStandardMetricScale

a scale of 5:1

S51 - Static variable in class nxopen.features.shipdesign.ExpansionDrawingBuilder.JaExpansiondrawingbuilderMetricScale

a scale of 5:1

S70 - Static variable in class nxopen.display.CameraBuilder.StockLens

70mm

S81 - Static variable in class nxopen.drawings.DrawingSheetBuilder.SheetStandardEnglishScale

a scale of 8:1

S81 - Static variable in class nxopen.features.shipdesign.ExpansionDrawingBuilder.JaExpansiondrawingbuilderEnglishScale

a scale of 8:1

SA_DESCRIPTION - Static variable in class nxopen.features.shipdesign.ManufacturingPreparationBuilder.AttributeType

name attribute

SA_FORM - Static variable in class nxopen.features.shipdesign.ManufacturingPreparationBuilder.AttributeType

form attribute

SA_MATERIAL - Static variable in class nxopen.features.shipdesign.ManufacturingPreparationBuilder.AttributeType

material attribute

SA_NAME - Static variable in class nxopen.features.shipdesign.ManufacturingPreparationBuilder.AttributeType

name attribute

SA_SIZE - Static variable in class nxopen.features.shipdesign.ManufacturingPreparationBuilder.AttributeType

size attribute

SA_TYPE - Static variable in class nxopen.features.shipdesign.ManufacturingPreparationBuilder.AttributeType

type attribute

SADDLE - Static variable in class nxopen.cam.ToolChangeCiBuilder.HeadDesignationTypes

Saddle

SAE - Static variable in class nxopen.HumanPosturePredictionBuilder.SteeringWheelPedalType

Use sae data to define steering wheel or pedal

SAEJ826JUL1995 - Static variable in class nxopen.features.vehicledesign.ManikinBuilder.StandardType

1995 SAE j826 Standard Type

SAEJ826NOV2008 - Static variable in class nxopen.features.vehicledesign.ManikinBuilder.StandardType

2008 SAE j826 Standard Type

SAEJ833 - Static variable in class nxopen.features.vehicledesign.ManikinBuilder.StandardType

SAE j833 Standard Type

saepercentile() - Method in interface nxopen.features.vehicledesign.ManikinBuilder

Returns the percentile limit that the manikin represents.

SAFE_PLANE - Static variable in class nxopen.cam.InspectionMethodBuilder.TransitionTypes

Safe Plane Transition Point

safeClearance() - Method in interface nxopen.cam.GeometrySet

Returns the safe clearance
License requirements: None.

safeClearance() - Method in interface nxopen.cam.OperationBuilder

Returns the safe clearance builder
License requirements: None.

safeClearance() - Method in interface nxopen.cam.SurfaceDriveGeometrySet

Returns the safe clearance
License requirements: None.

safeClearanceBuilder() - Method in interface nxopen.cam.NcmEngRetBuilder

Returns the engage/retract safe clearance builder
License requirements: None.

safeDistance() - Method in interface nxopen.cam.NcmClearanceBuilder

Returns the safe distance for automatic clearance
License requirements: None.

safeDistance() - Method in interface nxopen.cam.RoughTurningBuilder

Returns the Safe Distance
License requirements: None.

safeDistance() - Method in interface nxopen.cam.TurnEngageRetractBuilder

Returns the Safe Distance
License requirements: None.

safeDistanceBuilder() - Method in interface nxopen.cam.NcmTransfer

Returns the transfer between regions safe distance builder (inheritable tool dep)
License requirements: None.

safeOrDepartureDistance() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder

Returns the safe or departure distance
License requirements: None.

safePlane() - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder

Returns the safe plane
License requirements: None.

safePlaneDisplayAction() - Method in interface nxopen.cam.InspectionLinkPmiBuilder

Button to display selected safe plane
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

safePlaneSelectAction() - Method in interface nxopen.cam.InspectionLinkPmiBuilder

Button to select safe plane
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

safePlaneXform() - Method in interface nxopen.cam.InspectionPathBuilder

Returns the safe plane
License requirements: None.

SAFETY_BLOCK - Static variable in class nxopen.die.HeelpostBuilder.Types

no hole allowed

SAFETY_FACTOR - Static variable in class nxopen.cae.Result.Quantity

safetyClass() - Method in interface nxopen.annotations.SafetyClassBusinessModifierBuilder

Returns the safety class
License requirements: None.

SafetyClassBusinessModifier - Interface in nxopen.annotations

Represents buiness modifier that applies safety classification such as Critical, Major to a PMI. please see ug_safety_class_busmod.dfa for attribute details.

SafetyClassBusinessModifierBuilder - Interface in nxopen.annotations

Represents a SafetyClassBusinessModifier builder
To create a new instance of this class, use BusinessModifierCollection.createSafetyClassBusinessModifierBuilder(nxopen.annotations.SafetyClassBusinessModifier)

Created in NX6.0.0

safetyFactor() - Method in interface nxopen.cae.LaminateGraphicalReportBuilder

Returns the safety factor for failure index, strength ratio and margin of safety calculation
License requirements: None.

safetyFactor() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

Returns the safety factor
License requirements: None.

safetyMargin() - Method in interface nxopen.cae.LaminateGraphicalReportBuilder

Returns the safety margin result
License requirements: None.

safetyMargin() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

Returns the margin of safety
License requirements: None.

safetyMarginFromFlc() - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder

Returns the safety margin from flc
License requirements: None.

safetyMarginRule() - Method in interface nxopen.cae.LaminateGraphicalReportBuilder

Returns the safety margin rule
License requirements: None.

safetyMarginRule() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

Returns the strength ratio summary table enveloping rule
License requirements: None.

SAM0X - Static variable in class nxopen.display.StudioImageCaptureBuilder.AASamplesEnumType

Do not set sampling option

SAM16X - Static variable in class nxopen.display.StudioImageCaptureBuilder.AASamplesEnumType

Set sampling at 16 times

SAM2X - Static variable in class nxopen.display.StudioImageCaptureBuilder.AASamplesEnumType

Set sampling at 2 times

SAM4X - Static variable in class nxopen.display.StudioImageCaptureBuilder.AASamplesEnumType

Set sampling at 4 times

SAM8X - Static variable in class nxopen.display.StudioImageCaptureBuilder.AASamplesEnumType

Set sampling at 8 times

SAMCEF_DES - Static variable in class nxopen.cae.Result.Filetype

samcefSolidShells() - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder

Returns the option to use SAMCEF solid shells
License requirements: None.

samcefSolidShells() - Method in interface nxopen.cae.LaminateFillSetupBuilder

Returns the option to use SAMCEF solid shells
License requirements: None.

SAME - Static variable in class nxopen.cam.Blade.MaterialSideType

same

SAME - Static variable in class nxopen.cam.DmRotaryFloorFinishBuilder.MatSideType

same

SAME - Static variable in class nxopen.cam.DmSurfBuilder.MatSideType

same

SAME - Static variable in class nxopen.cam.GeometrySet.MaterialSideTypes

the tool is cutting on the same side as the natural side of the entity

SAME - Static variable in class nxopen.cam.NcmTransferBuilder.AppDepMethodTypes

use setting from transfer between regions

SAME - Static variable in class nxopen.cam.NcmTransferBuilder.TraverseTypes

traverse setting from between regions

SAME - Static variable in class nxopen.weld.AutoPointBuilder.InterferenceDetails

Indicates weld points exist and part name are the same.

SAME_AS_APPROACH - Static variable in class nxopen.cam.TurnAvoidanceDepartureBuilder.DeparturePathModes

Path is locked to approach path.

SAME_AS_APPROACH_BEFORE_TOOL_CHANGE - Static variable in class nxopen.cam.TurnAvoidanceDepartureBuilder.DeparturePathModes

Path is locked to approach path, but applied only before tool change.

SAME_AS_CLOSED - Static variable in class nxopen.cam.NcmPlanarEngRetBuilder.EngRetTypes

Same as Closed Engage (from open)

SAME_AS_DEFAULT - Static variable in class nxopen.cam.NcmHoleMachiningEngRet.EngRetTypes

Same as Default (Inherit)

SAME_AS_DEFAULT - Static variable in class nxopen.cam.NcmPlanarEngRetBuilder.EngRetTypes

Same as Default (Inherit)

SAME_AS_DEFAULT - Static variable in class nxopen.cam.NcmScEngRetBuilder.EngRetTypes

Same as Default

SAME_AS_DEPARTURE - Static variable in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.ReturnMoveModeTypes

Return Move: Same as Departure.

SAME_AS_DRIVE_PATH - Static variable in class nxopen.cam.ToolAxisVariable.Types

Same as drive path

SAME_AS_ENGAGE - Static variable in class nxopen.cam.NcmHoleMachiningEngRet.EngRetTypes

Same as Engage

SAME_AS_ENGAGE - Static variable in class nxopen.cam.NcmPlanarEngRetBuilder.EngRetTypes

Same as (Open) Engage (from retract)

SAME_AS_ENGAGE - Static variable in class nxopen.cam.NcmScEngRetBuilder.EngRetTypes

Same as Engage (only for retract)

SAME_AS_ENGAGE - Static variable in class nxopen.cam.TurnEngageRetractBuilder.Types

Same as Engage

SAME_AS_ENGAGE - Static variable in class nxopen.cam.TurnThreadEngageRetractBuilder.EngageRetractTypes

Same as Engage

SAME_AS_FACES_DIAMETERS - Static variable in class nxopen.cam.FacesSequence.Types

Faces Sequence: Same As Faces/Diameters

SAME_AS_FIRST_TEST_CUT - Static variable in class nxopen.cam.TurnRoughFinishTestCut.FeedInTypes

Test Cut Feed In: Same as First Test Cut

SAME_AS_FIRST_TEST_CUT - Static variable in class nxopen.cam.TurnRoughFinishTestCut.FeedOutTypes

Test Cut Feed Out: Same as First Test Cut

SAME_AS_FIRST_TEST_CUT - Static variable in class nxopen.cam.TurnRoughFinishTestCut.MeasuringPositionTypes

Test Cut Measuring Position: Same as First Test Cut

SAME_AS_FIRST_TEST_CUT - Static variable in class nxopen.cam.TurnRoughFinishTestCut.ReturnMoveTypes

Test Cut Return Move: Same as First Test Cut

SAME_AS_FIRST_TEST_CUT - Static variable in class nxopen.cam.TurnRoughFinishTestCut.StockModeTypes

Test Cut Stock Mode: Same as First Test Cut

SAME_AS_FIRST_TEST_CUT - Static variable in class nxopen.cam.TurnRoughFinishTestCut.StopPositionTypes

Test Cut Stop Position: Same as First Test Cut

SAME_AS_FROM - Static variable in class nxopen.cam.TurnAvoidanceGohomeBuilder.GohomePointModes

Point is locked to from point.

SAME_AS_INPUT - Static variable in class nxopen.cam.PitchSetting.OutputUnitTypes

Same as Input

SAME_AS_LEAD_IN - Static variable in class nxopen.cam.NcmWedmBuilder.LeadOutMethodTypes

same as lead in

SAME_AS_LEADING_TO_TRAILING - Static variable in class nxopen.cam.LeadAngles.ControlTypes

same as leading to trailing

SAME_AS_NON_STEEP - Static variable in class nxopen.cam.CutPatternBuilder.Types

Same as Non-steep

SAME_AS_NORMAL - Static variable in class nxopen.features.shipdesign.OrientationDefinitionBuilder.PlacementSideTypes

The stiffener will be placed on the positive normal side of the placement faces.

SAME_AS_OPEN_ENGAGE - Static variable in class nxopen.cam.NcmPlanarEngRetBuilder.MinClearanceTypes

Same as open engage

SAME_AS_ORIGINAL - Static variable in class nxopen.features.ExtractFaceBuilder.FaceSurfaceType

extracted surface is the same as the original surface

SAME_AS_PART - Static variable in class nxopen.cam.SpunOutlineGeom.CreationTypes

spun outline created by the same method as part

SAME_AS_PLUNGE_RETRACT - Static variable in class nxopen.cam.TurnEngageRetractBuilder.AutoOptions

Same as Plunge Retract

SAME_AS_POCKET_ID - Static variable in class nxopen.cam.MachinePocketGroupBuilder.RegisterType

Deprecated.

use same as pocket id

SAME_AS_POCKET_ID - Static variable in class nxopen.sim.KinematicComponentBuilder.RegisterTypes

the pocket id defined the register

SAME_AS_PROFILE_ENGAGE - Static variable in class nxopen.cam.TurnRoughFinishTestCut.FeedInTypes

Test Cut Feed In: Same as Profile eEgange

SAME_AS_PROFILE_RETRACT - Static variable in class nxopen.cam.TurnRoughFinishTestCut.FeedOutTypes

Test Cut Feed Out: Same as Profile Retract

SAME_AS_PROJECTION - Static variable in class nxopen.features.GlobalShapingBuilder.DirectionMethodType

Overcrown is same as projection direction

SAME_AS_RETRACT - Static variable in class nxopen.cam.NcmPlanarEngRetBuilder.MinClearanceTypes

Same as retract

SAME_AS_ROUGHING - Static variable in class nxopen.cam.CutParametersProfileCutRegionsTypes

Profile cut regions: Same as Roughing

SAME_AS_START - Static variable in class nxopen.cam.TurnAvoidanceReturnBuilder.ReturnPointModes

Point is locked start point.

SAME_AS_TAB_START_POINT - Static variable in class nxopen.cam.TabPointDataBuilder.TabThreadMethodType

Same as Tab start point

SAME_AS_TEMPLATE - Static variable in class nxopen.DxfdwgImporter.UnitsEnum

units same as template

SAME_COMP_RULE - Static variable in class nxopen.assemblies.ClearanceAnalysisBuilder.PairExcludedReason

global exclusion rule for same component applies

SAME_GROUP_RULE - Static variable in class nxopen.assemblies.ClearanceAnalysisBuilder.PairExcludedReason

global exclusion rule for same group applies

SAME_PART_RULE - Static variable in class nxopen.assemblies.ClearanceAnalysisBuilder.PairExcludedReason

global exclusion rule for same part applies

SAME_POSITION_IN_ALL - Static variable in class nxopen.assemblies.AssembliesParameterPropertiesBuilder.ArrangementOptions

All components are unvaried

SAME_TYPES - Static variable in class nxopen.features.SmoothCurveStringBuilder.MergeTypes

merge only spline curves

sameEndOffsets() - Method in interface nxopen.cae.BeamSectionOffsetOptions

Returns the flag indicating whether the offset on both fore end and aft end are consistent
License requirements: None.

sameParent() - Method in interface nxopen.tooling.ElectrodeCheckingBuilder

Returns the option for checking the workpiece and electrode part under the same part or not.

sameWithPlate() - Method in interface nxopen.tooling.FormingInsertBuilder

Returns the punch same with plate
License requirements: None.

sampleDensityIndex() - Method in interface nxopen.die.TrimLineDevelopmentBuilder

Returns the sample density index which controls the density of the sample planes.

sampleDistance() - Method in interface nxopen.features.SectionCurveBuilder

Returns the sample distance
License requirements: None.

sampleDistance() - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder

Returns the Sample Distance
License requirements: solid_modeling ("SOLIDS MODELING")
.

sampleDistance() - Method in interface nxopen.geometricutilities.CombOptionsBuilder

Returns the sample distance
License requirements: None.

sampleNumber() - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder

Returns the sample number
License requirements: solid_modeling ("SOLIDS MODELING")
.

samplePoints() - Method in interface nxopen.features.ConcaveFacesBuilder

Returns the number of sample points to apply to the analysis.

sampleRate() - Method in interface nxopen.motion.ControlInputPortBuilder

Returns the Sample Rate specifies the sampling frequency in samples per second for this element.

SAND - Static variable in class nxopen.annotations.AreaFillMaterial

Sand

SAND - Static variable in class nxopen.uf.UFDrf.AreaFillMaterial

SAND - Static variable in class nxopen.uf.UFDrf.ValidMaterial

sandwichBottomSkinMeshOption() - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder

Returns the bottom-skin-mesh options for the sandwich inflation
License requirements: None.

sandwichInflation() - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder

Returns the option to (de)activate the sandwich inflatoin
License requirements: None.

sandwichNumCoreElementLayers() - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder

Returns the number of core element layers for the sandwich inflation
License requirements: None.

sandwichTopSkinMeshOption() - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder

Returns the top-skin-mesh options for the sandwich inflation
License requirements: None.

saProject() - Method in interface nxopen.features.shipdesign.ManufacturingPreparationBuilder

Returns the project number assigned to the ship.

saProject() - Method in interface nxopen.features.shipdesign.SteelDistributionBuilder

Returns the sa project
License requirements: None.

saturation - Variable in class nxopen.preferences.ViewVisualizationSpecialEffects.ColorHLS

Saturation in HSV pattern is the "vibrancy" of the color Ranges from 0-255

saturation - Variable in class nxopen.preferences.ViewVisualizationSpecialEffects.ColorHSV

Saturation in HSV pattern is the "vibrancy" of the color Ranges from 0-255

SAUDI_ARABIA_GULF_STATES_SSA770771GS421442 - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.DriverSideStandardsType

Represents Saudi Arabia - Gulf States : SSA 770/771 GS 421/442 standard

SAUDI_ARABIA_GULF_STATES_SSA770771GS421442 - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.InsideStandardsType

Represents Saudi Arabia - Gulf States : SSA 770/771 GS 421/442 standard

SAUDI_ARABIA_GULF_STATES_SSA770771GS421442 - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.PassengerSideStandardsType

Represents Saudi Arabia - Gulf States : SSA 770/771 GS 421/442 standard

SAVE - Static variable in class nxopen.assemblies.DesignElementBuilder.OperationType

Saves a design element

save() - Method in interface nxopen.assemblies.Order

Saves an order
License requirements: assemblies ("ASSEMBLIES MODULE")
.

SAVE - Static variable in class nxopen.AttributePropertiesBuilder.OperationType

save(BasePart.SaveComponents, BasePart.CloseAfterSave) - Method in interface nxopen.BasePart

Saves the part whether it is modified or not.

save() - Method in interface nxopen.cae.xyplot.Preference

Saves preference settings to memory file so that preference setting could be shared among sessions
License requirements: nx_ftk ("NX Advanced Graphing")
.

save(String[], String) - Method in interface nxopen.gateway.BaseExplicitOrderBuilder

Saves an explicit order defined by the user
License requirements: None.

save() - Method in interface nxopen.issue.IssueBriefcase

Saves all IssueContent s.

save() - Method in interface nxopen.Layout

Saves a layout.

save(String) - Method in interface nxopen.LoadOptions

Saves the current load options settings in a system file
License requirements: None.

save(String, boolean) - Method in interface nxopen.ModelingViewHighQualityImage

Saves the currently displayed high qualilty image of a view to a file.

save() - Method in interface nxopen.options.ChangeList

Saves options values at the current level.

save() - Method in interface nxopen.options.DraftingStandardChangeList

Saves the drafting standard defaults at the current level.

SAVE - Static variable in class nxopen.pdm.SmartSaveBuilder.SaveType

File Save

save() - Method in interface nxopen.report.CommandLibrary

Saves all commands to their binding xml file.

save() - Method in interface nxopen.Spreadsheet

Saves the spreadsheet in the part file.

SAVE - Static variable in class nxopen.tooling.DieBaseBuilder.DesignToolOption

save sub die base as template

save() - Method in interface nxopen.uf.UFPart

Refer to UF_PART_save for documentation.

save(String, String, int, int) - Method in interface nxopen.uf.UFView

Refer to UF_VIEW_save for documentation.

SAVE - Static variable in class nxopen.uistyler.FileOperationData.FileOperationType

Save file operation

SAVE - Static variable in class nxopen.Validation.UpdateTime

During save time

save() - Method in interface nxopen.ViewCollection

Saves current view.

save() - Method in interface nxopen.visualreporting.VisualReport

Saves this VisualReport to its current VisualReport.filename() .

save() - Method in interface nxopen.visualreporting.VisualReportBuilder

Saves the VisualReport to its current VisualReportBuilder.filenameOfVisualReport() .

save() - Method in interface nxopen.WCS

Saves the WCS.

save2dIpw() - Method in interface nxopen.cam.PlanarMillingBuilder

Returns the Save 2D In-Process Workpiece
License requirements: None.

SAVE_ALL - Static variable in class nxopen.pdm.SmartSaveBuilder.SaveType

File SaveAll

SAVE_ALL - Static variable in class nxopen.uistyler.FileOperationData.FileOperationType

Save all file operation

SAVE_ALL_AND_CLOSE - Static variable in class nxopen.uistyler.FileOperationData.FileOperationType

Save all and close file operation

SAVE_AND_CLOSE - Static variable in class nxopen.assemblies.DesignElementBuilder.OperationType

Saves a design element and if it is a reuse closes the reused part

SAVE_AND_CLOSE - Static variable in class nxopen.pdm.SmartSaveBuilder.SaveType

File Save And Close

SAVE_AND_CLOSE - Static variable in class nxopen.uistyler.FileOperationData.FileOperationType

Save and close file operation

SAVE_AND_EXIT - Static variable in class nxopen.uistyler.FileOperationData.FileOperationType

Save and Exit file operation

SAVE_AND_UPDATE - Static variable in class nxopen.tooling.ConcurrentDesignManagementBuilder.Types

the save and update page

SAVE_AS - Static variable in class nxopen.assemblies.DesignElementBuilder.OperationType

Save as a design element

SAVE_AS - Static variable in class nxopen.AttributePropertiesBuilder.OperationType

SAVE_AS - Static variable in class nxopen.pdm.PartOperationBuilder.OperationType

Save As Part

SAVE_AS - Static variable in class nxopen.tooling.ToolingClonemethod

Use part save as method

SAVE_AS - Static variable in class nxopen.uistyler.FileOperationData.FileOperationType

Save as file operation

SAVE_AS_AND_CLOSE - Static variable in class nxopen.uistyler.FileOperationData.FileOperationType

Save as and close file operation

SAVE_AS_PART_REASON - Static variable in class nxopen.uf.UF.CallbackReason

SAVE_DML - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.CommandTypes

Enter a statement defining a Save DML statement

SAVE_IF_PASSED - Static variable in class nxopen.validate.RequirementCheck.SaveResultsToTeamcenterOptions

Perform save only if the result is passed.

SAVE_IF_PASSED - Static variable in class nxopen.validate.ValidatorOptions.SaveModeTypes

Perform save only if the checking is passed.

SAVE_MY_COMPONENTS - Static variable in class nxopen.tooling.ConcurrentDesignManagementBuilder.UpdateTypes

the save my components action

SAVE_NO_SHADED_OR_PATTERN - Static variable in class nxopen.PartSaveOptions.PatternData

SAVE_PART_REASON - Static variable in class nxopen.uf.UF.CallbackReason

SAVE_PATTERN_AND_SHADED - Static variable in class nxopen.PartSaveOptions.PatternData

SAVE_PATTERN_ONLY - Static variable in class nxopen.PartSaveOptions.PatternData

SAVE_PCS - Static variable in class nxopen.cam.InspectionAlignmentBuilder.AlignTypes

Save current PCS

SAVE_PRECISE_ASSEMBLY - Static variable in class nxopen.pdm.SmartSaveBuilder.SaveType

File SavePreciseAssembly

SAVE_WORK_PART_ONLY - Static variable in class nxopen.pdm.SmartSaveBuilder.SaveType

File SaveWorkPartOnly

saveAdvancedDisplayFacets() - Method in interface nxopen.preferences.PartVisualizationPerformance

Returns the save advanced facets.

saveAfuOption() - Method in interface nxopen.cae.PostGraphBuilder

Returns the save in AFU option to save graph data as AFU records
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

saveAll() - Method in interface nxopen.PartCollection

Saves all modified parts in a session.

saveAll() - Method in interface nxopen.uf.UFPart

Refer to UF_PART_save_all for documentation.

saveAllActiveViews() - Method in interface nxopen.uf.UFView

Refer to UF_VIEW_save_all_active_views for documentation.

SaveAllData() - Constructor for class nxopen.PartCollection.SaveAllData

SaveAllData() - Constructor for class nxopen.uf.UFPart.SaveAllData

saveAllIterationResults() - Method in interface nxopen.cae.optimization.DAOStopCondition

Returns the save all interation results flag
License requirements: None.

saveAllTree() - Method in interface nxopen.weld.ConnectionFinderBuilder

Identify all the connected part information as "saved" so the commit will save the information.

saveAnnotationType(AnnotationSettingsBuilder.AnnotationTypeEnum, boolean) - Method in interface nxopen.drawings.AnnotationSettingsBuilder

API used to save settings data
License requirements: convert_to_pmi (" Convert To PMI"), drafting ("DRAFTING")
.

saveAs(String) - Method in interface nxopen.assemblies.Order

Creates a copy of the order, and gives the copy a new name.

saveAs(String) - Method in interface nxopen.BasePart

Creates copy of target part.

saveAs(String) - Method in interface nxopen.Layout

Saves a layout with a different name.

saveAs() - Method in interface nxopen.linedesigner.ExportPlantToDWGBuilder

Returns the save as
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

saveAs() - Method in interface nxopen.linedesigner.ExportToDWGBuilder

Returns the save as type
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

saveAs(String) - Method in interface nxopen.uf.UFPart

Refer to UF_PART_save_as for documentation.

saveAs(View, String, boolean, boolean) - Method in interface nxopen.ViewCollection

Saves a view with user specified name.

saveAsAction() - Method in interface nxopen.assemblies.DesignElementBuilder

Returns the save as action type of a design element
License requirements: None.

saveAsDefault() - Method in interface nxopen.weld.ExportWeldBuilder

Save exported attributes as default template.

saveAsLocation() - Method in interface nxopen.drawings.ConversionProcessSettingsBuilder

Returns the save as file browser
License requirements: None.

saveAsModelView() - Method in interface nxopen.annotations.SearchModelViewBuilder

TODO: fill in a description for this
License requirements: None.

saveAsName() - Method in interface nxopen.features.MasterCutBuilder

Returns the cut save as name
License requirements: solid_modeling ("SOLIDS MODELING")
.

saveAsPartfile() - Method in interface nxopen.cam.SimulationOptionsBuilder

Returns the save as partfile
License requirements: None.

saveAsPreservingCase(View, String, boolean, boolean) - Method in interface nxopen.ViewCollection

Preserve case for user defined view names.

saveAssociativeCurves() - Method in interface nxopen.annotations.LightweightSectionBuilder

Returns the save associative curves toggle value
License requirements: None.

saveAsTemplate(String, String) - Method in interface nxopen.cae.xyplot.BaseTemplateManager

Saves to new template file
License requirements: nx_ftk ("NX Advanced Graphing")
.

saveAsTextFile(String, String, boolean) - Method in interface nxopen.gateway.BaseExplicitOrderBuilder

Saves the selected saved order in the form of a text file
License requirements: None.

saveBookmark(String, BasePart.BookmarkOption) - Method in interface nxopen.BasePart

Saves a bookmark file.

saveBuilderData() - Method in interface nxopen.tooling.MWDefineSheetsBuilder

Save the data for the "Define Sheets" builder
License requirements: None.

saveCgm() - Method in interface nxopen.PlotBuilder

Saves the selected sheets as CGM files.

saveCgm(Tag, UFPlot.JobOptions, String, UFPlot.BannerOptions, String) - Method in interface nxopen.uf.UFPlot

Refer to UF_PLOT_save_cgm for documentation.

saveCgmForPlotLayout(String, UFPlot.BannerOptions, String) - Method in interface nxopen.uf.UFPlot

Refer to UF_PLOT_save_cgm_for_plot_layout for documentation.

saveChanges() - Method in interface nxopen.issue.IssueContent

Saves the changes to issue server
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.

saveChanges() - Method in interface nxopen.issue.IssueList

Saves the modified IssueContent s
License requirements: nx_issue_mgmt ("NX Issue Tracking")

Created in NX8.5.0

saveColors() - Method in interface nxopen.PlotColorsWidthsBuilder

Save drawing sheet colors
License requirements: None.

saveComponentPartFilesDuringLoad() - Method in interface nxopen.preferences.SessionNXGateway

Returns the save component part files flag during load for I-DEAS
License requirements: None.

saveConfig() - Method in interface nxopen.issue.IssueList

Saves the config of IssueList to server
License requirements: nx_issue_mgmt ("NX Issue Tracking")

Created in NX9.0.0

saveConfigurationFile(String) - Method in interface nxopen.drawings.SettingsBuilder

API used to save settings data
License requirements: convert_to_pmi (" Convert To PMI"), drafting ("DRAFTING")
.

saveConstraints() - Method in interface nxopen.features.DimensionBuilder

Returns the SaveConstraints builder which is used by ADM Dimension Features.

saveConstraints() - Method in interface nxopen.geometricutilities.SaveConstraintsBuilder

Returns the flag indicating whether to save the constraints or not
License requirements: None.

SaveConstraintsBuilder - Interface in nxopen.geometricutilities

Represents a builder for a Save Constraints.

saveContactDisplayDataFlag() - Method in interface nxopen.cam.OperationDisplayOptionsBuilder

Returns the save contact displat data flag
License requirements: None.

saveCurves(String) - Method in interface nxopen.display.BoundedGridBuilder

Creates curves by intersecting the bounded grid with all bodies in the part of the grid object.

saveCurves(String) - Method in interface nxopen.display.DynamicSectionBuilder

Creates curves by intersecting all clipping planes of the section with all visible bodies in the scene and adds them to the group created with the specified name.

SAVED - Static variable in class nxopen.assemblies.Order.State

Order is saved

saved - Variable in class nxopen.uf.UFPart.UpdateFamilyInstanceData

SAVED - Static variable in class nxopen.View.ScaleAdjustment

SAVED - Static variable in class nxopen.weld.ConnectionFinderBuilder.FilterTypes

saveDataForFeatureEdit() - Method in interface nxopen.preferences.SessionModeling

Returns the option "Save Data for Feature Edit" specifies what additional data will be saved in the part to enhance feature edit.

saveDestination() - Method in interface nxopen.visualreporting.VisualReport

Returns the VisualReport.SaveDestinationOption of the VisualReport .

saveDestination() - Method in interface nxopen.visualreporting.VisualReportBuilder

Returns the VisualReport.SaveDestinationOption of the VisualReport being built by this builder.

saveDid() - Method in interface nxopen.cam.InspectionAlignmentBuilder

Returns the save device id
License requirements: None.

saveDirectory() - Method in interface nxopen.partfamily.TemplateManager

Returns the save directory path value
License requirements: solid_modeling ("SOLIDS MODELING")
.

saveDisplayFacets() - Method in interface nxopen.BasePart

Returns whether display quality facets are saved in the part file
License requirements: None.

saveDmlDidLabel() - Method in interface nxopen.cam.InspectionCmmCommandBuilder

Returns the save DML DID label
License requirements: None.

saveDmlPcsLabel() - Method in interface nxopen.cam.InspectionCmmCommandBuilder

Returns the save DML PCS label
License requirements: None.

saveDmlPointData() - Method in interface nxopen.cam.InspectionCmmCommandBuilder

Returns the save DML point data
License requirements: None.

saveDmlVersion() - Method in interface nxopen.cam.InspectionCmmCommandBuilder

Returns the save DML version
License requirements: None.

saveDropPointPosition(Point3d) - Method in interface nxopen.tooling.FastenerAssy

Keep the first drop point position
License requirements: None.

saveEdgePrepValues(EdgePrepValuesBuilder) - Method in interface nxopen.weld.JointItemBuilder

Save edge prep values to the Welding Joint.

saveEditingFillComponentPosition(Matrix3x3, Point3d) - Method in interface nxopen.tooling.MoldFillingBuilder

Saves the position of fill component to be edit.

saveFaceColors() - Method in interface nxopen.cam.NCAssistantBuilder

Returns the Save Face Colors on Exit
License requirements: None.

saveFamilyAndApplyValues(InstanceDefinition) - Method in interface nxopen.partfamily.TemplateManager

Save part family and apply the values of chosen family member definition to the template part, It returns failure codes through errorCode.

saveFamilyAndCreateMembers(InstanceDefinition[]) - Method in interface nxopen.partfamily.TemplateManager

Save part family and create the family members supplied through input array.

saveFamilyAndFixOrphanMembers(boolean, InstanceDefinition[]) - Method in interface nxopen.partfamily.TemplateManager

Save part family and fix the orphan family members supplied through input array.

saveFamilyAndUpdateMembers(boolean, InstanceDefinition[]) - Method in interface nxopen.partfamily.TemplateManager

Save part family and update the family members supplied through input array.

saveFiles(File[]) - Method in interface nxopen.markup.MarkupFileCollection

Saves a list of File
License requirements: None.

saveFilletCurves() - Method in interface nxopen.tooling.BlendCurve3DBuilder

Save the corner fillet curves.

saveFlag() - Method in interface nxopen.cam.CutterExport

Returns the export type
License requirements: None.

saveGeometry() - Method in interface nxopen.cae.DurabilityEventSolverBuilder

Returns the geometry save flag.

saveGeometry() - Method in interface nxopen.cae.DurabilitySolverBuilder

Returns the geometry save flag.

saveGraphObjectToAfu(String, Graph, Graph) - Method in interface nxopen.motion.MotionSolution

Save the result of graph to afu file
License requirements: mechanisms ("MECHANISMS")
.

saveGraphObjectToSpreadsheet(Graph, Graph[], boolean, boolean) - Method in interface nxopen.motion.MotionSolution

Save the result of graph to spreadsheet
License requirements: mechanisms ("MECHANISMS")
.

saveIgesSettings(String) - Method in interface nxopen.NXTo2dCreator

Saves the save settings - this will save iges the settings to a file sepcified
License requirements: None.

SaveImageFileBrowserBuilder - Interface in nxopen.display

Represents a SaveImageFileBrowserBuilder .

SaveImageFileBrowserBuilder.FileFormats - Class in nxopen.display

To specify the Ray Traced Studio static image file format

saveInterference - Variable in class nxopen.uf.UFClear.Pref

saveInterferenceGeometry() - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder

Returns the setting to determine if interference geometry should be saved.

saveIpwModel() - Method in interface nxopen.cam.Preferences

Returns the ipw model
License requirements: None.

saveLayout() - Method in interface nxopen.cam.LayoutCiBuilder

Method to save the layer layout.

saveLayoutAtExit() - Method in interface nxopen.preferences.SessionUserInterfaceUI

Returns the save layout at exit flag.

saveLevelBasedIpw() - Method in interface nxopen.cam.Preferences

Returns the level based ipw
License requirements: None.

saveLibraryPath(String, String) - Method in interface nxopen.tooling.AddReusablePart

Saves the library name and path of the reusable component
License requirements: None.

saveListingWindow(String) - Method in interface nxopen.uf.UFUi

Refer to UF_UI_save_listing_window for documentation.

saveLog(String) - Method in interface nxopen.report.AutomationLogger

Saves the messages in the logger to a file.

saveMasterPart() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

Returns the option to specify whether or not the master part will be saved before entering the scenario.

saveMasterPath(boolean) - Method in interface nxopen.cam.Operation

Save Master Tool Path for AutoQC
License requirements: cam_base ("CAM BASE")
.

saveMaterialsButton() - Method in interface nxopen.display.IrayPlusSimpleMaterialEditorBuilder

To save to System Studio Materials
License requirements: studio_render ("UG STUDIO RENDER")
.

saveMemoryFile() - Method in interface nxopen.report.ReportPreference

Saves preference settings to memory file
License requirements: None.

saveModelViewOrder(String[], String) - Method in interface nxopen.annotations.PmiManager

Saves an explicit order defined by the user
License requirements: geometric_tol ("GDT")
.

saveName() - Method in interface nxopen.gateway.BaseExplicitOrderBuilder

Returns the save name
License requirements: None.

saveNode(NXObject) - Method in interface nxopen.weld.ConnectionFinderBuilder

Identify the connected part information as "saved" so commit will save the information.

saveNxto2dSettings(String) - Method in interface nxopen.NXTo2dCreator

Returns the save settings - this will save nxto2d the settings to a file sepcified
License requirements: None.

saveOptions() - Method in interface nxopen.BasePart

Returns the PartSaveOptions instance belonging to this part .

saveOptions() - Method in interface nxopen.PartCollection

The SaveOptions that determines how parts are saved in this session
Created in NX3.0.0

SaveOptions - Interface in nxopen

Contains accessor methods for all part save options that follow the session.

savePartFamily() - Method in interface nxopen.partfamily.TemplateManager

Save the changes in template manager to core part family
License requirements: solid_modeling ("SOLIDS MODELING")
.

savePartFile() - Method in interface nxopen.validate.ValidatorOptions

Returns the configuration of saving part file after checking finished.

savePath(Path) - Method in interface nxopen.cam.Operation

This must be called to establish proper part status
License requirements: cam_base ("CAM BASE")
.

savePcsLabel() - Method in interface nxopen.cam.InspectionAlignmentBuilder

Returns the save pcs label
License requirements: None.

savePositioningOriginPlacement(String, int) - Method in interface nxopen.tooling.AddReusablePart

Keep positioning offset and placement index
License requirements: None.

savePreciseAssembly(Tag, boolean) - Method in interface nxopen.uf.UFUgmgr

Refer to UF_UGMGR_save_precise_assembly for documentation.

saveRecords(int[], String[], String, boolean) - Method in interface nxopen.cae.xyplot.Plot

Saves plotted records on a graph to an afu file.

saveRecordsToCsv(int[], String[], String, boolean) - Method in interface nxopen.cae.xyplot.Plot

Saves plotted records on a plot graph to a CSV file.

saveRelation() - Method in interface nxopen.features.MakeOffsetBuilder

Returns the keep relation.

saveRequests(int, PenetrationRequest[]) - Method in interface nxopen.features.shipdesign.PenetrationUtils

Save the requests
License requirements: nx_penetration_mgmt ("Penetration Management")
.

saveResult() - Method in interface nxopen.weld.WeldAdvisorBuilder

The save all to part
License requirements: ugweld ("UG WELD")
.

saveResultInPart() - Method in interface nxopen.validate.ValidatorOptions

Returns the configuration of saving check results into part file.

saveResultInTeamcenter() - Method in interface nxopen.validate.ValidatorOptions

Returns the configuration of saving check results into Teamcenter.

saveResults() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

Saves the Results after calling the WallThicknessCheckerBuilder.calculate() to save the thickness calculation results.

saveResultsInPart() - Method in interface nxopen.tooling.ElectrodeCheckingBuilder

Returns the option for saving checking results in part.

saveResultsToTeamcenterOption() - Method in interface nxopen.validate.RequirementCheck

Returns the Save Results to Teamcenter option
License requirements: None.

saveRollbackData() - Method in interface nxopen.preferences.SessionModeling

Deprecated.

Deprecated in NX10.0.0. Use SessionModeling.saveDataForFeatureEdit() instead.

saveScenario() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

Returns the option to specify whether or not the scenario will be saved.

saveScenario() - Method in interface nxopen.uf.UFSf

Refer to UF_SF_save_scenario for documentation.

saveSetting() - Method in interface nxopen.tooling.PocketBuilder

Returns the option for saving pocket check result in part.

saveSettings(String) - Method in interface nxopen.AcisExporter

Save the settings - this will save the settings to a file sepcified
License requirements: None.

saveSettings(String) - Method in interface nxopen.AcisImporter

Save the settings - this will save the settings to a file specified
License requirements: None.

saveSettings(String) - Method in interface nxopen.Catiav4Creator

The save settings - this will save the settings to a file sepcified
License requirements: None.

saveSettings(String) - Method in interface nxopen.Catiav4Importer

Save the settings - this will save the settings to a file sepcified
License requirements: None.

saveSettings(String) - Method in interface nxopen.Catiav5Creator

Save the settings - this will save the settings to a file sepcified
License requirements: None.

saveSettings(String) - Method in interface nxopen.Catiav5Importer

Save the settings - this will save the settings to a file sepcified
License requirements: None.

saveSettings(String) - Method in interface nxopen.DxfdwgCreator

Saves the save settings - this will save the settings to a file sepcified
License requirements: None.

saveSettings(String) - Method in interface nxopen.DxfdwgImporter

Saves the save settings - this will save the settings to a file specified
License requirements: None.

saveSettings(String) - Method in interface nxopen.IgesCreator

The save settings - this will save the settings to a file sepcified
License requirements: None.

saveSettings(String) - Method in interface nxopen.IgesImporter

Returns the save settings - this will save the settings to a file specified
License requirements: None.

saveSettings(String) - Method in interface nxopen.ProeImporter

Save the settings - this will save the settings to a file specified
License requirements: None.

saveSettings(String) - Method in interface nxopen.Step203Creator

Deprecated.

Deprecated in NX11.0.0. Use StepCreator instead.

saveSettings(String) - Method in interface nxopen.Step203Importer

Saves the save settings - this will save the settings to a file specified
License requirements: None.

saveSettings(String) - Method in interface nxopen.Step214Creator

Deprecated.

Deprecated in NX11.0.0. Use StepCreator instead.

saveSettings(String) - Method in interface nxopen.Step214Importer

Saves the save settings - this will save the settings to a file specified
License requirements: None.

saveSettings(String) - Method in interface nxopen.Step242Importer

Saves the save settings - this will save the settings to a file specified
License requirements: None.

saveSettings(String) - Method in interface nxopen.StepCreator

The save settings - this will save the settings to a file sepcified
License requirements: None.

saveSettingsToFile(String) - Method in interface nxopen.sim.IsvControlPanelBuilder

Save simulation settings to xml file
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

saveSimulation(NXObject, String) - Method in interface nxopen.motion.MotionSimulation

Save the simulation through input part name
License requirements: mechanisms ("MECHANISMS")
.

saveSimulation(NXObject, NXObject) - Method in interface nxopen.motion.MotionSimulation

Save the simulation through input part object
License requirements: mechanisms ("MECHANISMS")
.

saveSpinningIpwAsPart(Tag, String) - Method in interface nxopen.uf.UFTurn

Refer to UF_TURN_save_spinning_ipw_as_part for documentation.

saveState() - Method in interface nxopen.cam.InspectionAlignmentBuilder

Returns the save state
License requirements: None.

saveStatus - Variable in class nxopen.PartCollection.ImportToolDesignPackageData

Parts that could not be saved and their associated errors.

saveStatus - Variable in class nxopen.PartCollection.SaveAllData

Parts that could not be saved and their associated errors.

saveTemplate(String) - Method in interface nxopen.cae.xyplot.BaseTemplateManager

Saves to template file
License requirements: nx_ftk ("NX Advanced Graphing")
.

saveToFile(String) - Method in interface nxopen.features.vehicledesign.ManikinBuilder

Save the manikin size definition into a file.

saveToFile(String) - Method in interface nxopen.motion.TireProperty

Save tire property to text file
License requirements: mechanisms ("MECHANISMS")
.

saveToFile(String) - Method in interface nxopen.report.ResultXmlFileWriter

Exports all document data to result XML file
License requirements: None.

saveToFile() - Method in interface nxopen.weld.ExportWeldBuilder

Save exported attributes to a template file.

saveToLayer() - Method in interface nxopen.cam.InspectionMeasDataBuilder

Save results to layer
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

saveToLayer() - Method in interface nxopen.cam.InspectionSaveToLayerBuilder

Saves measured data to a layer.

saveToSystemStudioMaterials(String) - Method in interface nxopen.display.IrayPlusMaterialEditorBuilder

To save to System Studio Materials
License requirements: studio_render ("UG STUDIO RENDER")
.

saveToTeamcenter() - Method in interface nxopen.mechatronics.MechatronicsManager

Saves the data model to teamcenter.

saveToTeamcenter(boolean, boolean, boolean) - Method in interface nxopen.mechatronics.MechatronicsManager

Saves the data model to teamcenter.

saveToXmlFile(String) - Method in interface nxopen.mechatronics.ExpressionBlockBuilder

Save data to xml file.

saveUdoData() - Method in interface nxopen.tooling.FastenerAssy

Saves UDO data for fastener assembly
License requirements: None.

saveUserSymbolPart(MasterCustomSymbolData) - Method in interface nxopen.annotations.AnnotationManager

Deprecated.

Deprecated in NX7.5.2. Use MasterSymbolBuilder instead.

saveViewCacheSettings() - Method in interface nxopen.cam.InspectionGraphicalReportBuilder

Cache the current view settings.

saveWidths() - Method in interface nxopen.PlotColorsWidthsBuilder

Save drawing sheet widths
License requirements: None.

saveWithDescription(String, BasePart.BookmarkOption, String) - Method in interface nxopen.gateway.BookmarkFile

Creates a bookmark file including a description.

saveWorkOnly() - Method in interface nxopen.uf.UFPart

Refer to UF_PART_save_work_only for documentation.

saveXmlTransform() - Method in interface nxopen.cae.CorrelAlignmentBuilder

Returns the save xml transform
License requirements: None.

SAWTOOTH - Static variable in class nxopen.drawings.BrokenViewBuilder.BreakLineStyle

Sawtooth

SAWTOOTH - Static variable in class nxopen.drawings.ViewBreakBuilder.Viewbreaklinestyle

SAWTOOTH - Static variable in class nxopen.preferences.PartDrafting.BreakLineStyle

Sawtooth

SBEND - Static variable in class nxopen.preferences.RoutingPath.AllowedCornerType

UF_ROUTE_AV_CORNERS_SBEND

SBEND - Static variable in class nxopen.routing.CornerTypeBuilder.Type

SBEND - Static variable in class nxopen.tooling.BendInsertDesignBuilder.BendTypeOption

90 degree bend

SBendCorner - Interface in nxopen.routing

The Routing SBendCorner defines a S-Bend.

SBendCorner.SBendData - Class in nxopen.routing

This class holds the data returned from SBendCorner.getSBendData()

SBendCornerCollection - Interface in nxopen.routing

Represents a collection of SBendCorner objects.

SBendCornerCollection.ComputeSBendData - Class in nxopen.routing

This class holds the data returned from SBendCornerCollection.computeSBend(nxopen.Point3d, nxopen.Point3d, nxopen.Vector3d, nxopen.Vector3d, double, int)

sbendCorners() - Method in interface nxopen.routing.RouteManager

SBendCorner collection .

SBendData() - Constructor for class nxopen.routing.SBendCorner.SBendData

sbendType - Variable in class nxopen.routing.SBendCorner.SBendData

S-Bend type

SBSWEB_THICKENESS - Static variable in class nxopen.features.shipdesign.StiffenerBySupportPathBuilder.SetBackMethod

SBS Web Thickness

SCALABLE - Static variable in class nxopen.GroupBuilder.SketchType

A sketch group which corresponds to a Scalable Sketch constraint

SCALABLE_SET - Static variable in class nxopen.uf.UFSket.ConType

SCALAR - Static variable in class nxopen.cae.Result.Component

SCALAR - Static variable in class nxopen.cae.Result.DataType

Scalar - Interface in nxopen

Represents a scalar.

Scalar.DimensionalityType - Class in nxopen

Specifies the dimensionality of the scalar.

SCALAR1 - Static variable in class nxopen.cae.Result.Component

SCALAR10 - Static variable in class nxopen.cae.Result.Component

SCALAR11 - Static variable in class nxopen.cae.Result.Component

SCALAR12 - Static variable in class nxopen.cae.Result.Component

SCALAR2 - Static variable in class nxopen.cae.Result.Component

SCALAR3 - Static variable in class nxopen.cae.Result.Component

SCALAR4 - Static variable in class nxopen.cae.Result.Component

SCALAR5 - Static variable in class nxopen.cae.Result.Component

SCALAR6 - Static variable in class nxopen.cae.Result.Component

SCALAR7 - Static variable in class nxopen.cae.Result.Component

SCALAR8 - Static variable in class nxopen.cae.Result.Component

SCALAR9 - Static variable in class nxopen.cae.Result.Component

SCALAR_DIMENSIONALITY_AREA - Static variable in class nxopen.uf.UFSo.ScalarDimOption

SCALAR_DIMENSIONALITY_LENGTH - Static variable in class nxopen.uf.UFSo.ScalarDimOption

SCALAR_DIMENSIONALITY_NONE - Static variable in class nxopen.uf.UFSo.ScalarDimOption

SCALAR_DIMENSIONALITY_VOLUME - Static variable in class nxopen.uf.UFSo.ScalarDimOption

SCALAR_FIELD_TABLE_WRAPPER - Static variable in class nxopen.BasePropertyTable.BasePropertyType

SCALAR_FIELD_WRAPPER - Static variable in class nxopen.BasePropertyTable.BasePropertyType

SCALAR_FIELD_WRAPPER - Static variable in class nxopen.cae.PropertyTable.PropertyType

BASE_PROPERTY_TABLE_property_type_scalar_field_wrapper

SCALAR_TABLE - Static variable in class nxopen.BasePropertyTable.BasePropertyType

SCALAR_TABLE - Static variable in class nxopen.cae.PropertyTable.PropertyType

BASE_PROPERTY_TABLE_property_type_scalar_table

ScalarArrayWithUnitsPropertyValueData() - Constructor for class nxopen.BasePropertyTable.ScalarArrayWithUnitsPropertyValueData

ScalarCollection - Interface in nxopen

Represents a collection of Scalar objects.

scalarFactor() - Method in interface nxopen.cae.responsesimulation.FunctionComponentData

Returns the scalar factor
License requirements: nx_response_anlys ("NX Response Analysis")
.

ScalarFieldTableRowColData() - Constructor for class nxopen.BasePropertyTable.ScalarFieldTableRowColData

ScalarFieldWrapper - Interface in nxopen.fields

This class defines a scalar value that is internally backed up by a (optionally scaled) field or an expression.

ScalarForce - Interface in nxopen.motion

Represents the Motion ScalarForce class.

ScalarForceBuilder - Interface in nxopen.motion

Represents a ScalarForceBuilder
To create a new instance of this class, use ScalarForceCollection.createScalarForceBuilder(nxopen.motion.ScalarForce)

Created in NX6.0.0

ScalarForceCollection - Interface in nxopen.motion

Represents a Scalar Force Collection.

scalarForces() - Method in interface nxopen.motion.MotionManager

Returns the ScalarForceCollection belonging to this part
Created in NX3.0.0

ScalarForceTorque() - Constructor for class nxopen.uf.UFMotion.ScalarForceTorque

ScalarForceTorque(String, Tag, Tag, Tag, Tag, Tag, Tag) - Constructor for class nxopen.uf.UFMotion.ScalarForceTorque

ScalarMatrixValue - Interface in nxopen

Represents a General M x N matrix of scalar (real) values.

scalars() - Method in interface nxopen.BasePart

Returns the ScalarCollection instance belonging to this part .

ScalarTableValue - Interface in nxopen

Represents a General M x N table of scalar (real) values.

ScalarTorque - Interface in nxopen.motion

Represents the Motion ScalarTorque class.

ScalarTorqueBuilder - Interface in nxopen.motion

Represents a ScalarTorqueBuilder
To create a new instance of this class, use ScalarTorqueCollection.createScalarTorqueBuilder(nxopen.motion.ScalarTorque)

Created in NX6.0.0

ScalarTorqueCollection - Interface in nxopen.motion

Represents a collection of motion scalar torque
To obtain an instance of this class, refer to MotionManager

Created in NX6.0.0

scalarTorques() - Method in interface nxopen.motion.MotionManager

Returns the ScalarTorqueCollection belonging to this part
Created in NX3.0.0

ScalarWithDataPropertyValueData() - Constructor for class nxopen.cae.PropertyTable.ScalarWithDataPropertyValueData

scale() - Method in interface nxopen.annotations.BalloonNoteBuilder

Returns the scale
License requirements: None.

scale() - Method in interface nxopen.annotations.BaseCustomSymbolBuilder

Returns the scale
License requirements: None.

scale() - Method in interface nxopen.annotations.CustomSymbolData

Deprecated.

Deprecated in NX9.0.0. Use DraftingCustomSymbolBuilder for Drafting Custom Symbol and PmiCustomSymbolBuilder for PMI Custom Symbol objects.

scale() - Method in interface nxopen.annotations.HatchBuilder

Deprecated.

Deprecated in NX7.5.0. Use HatchFillSettingsBuilder instead.

scale() - Method in interface nxopen.annotations.HatchFillSettingsBuilder

Returns the scale
License requirements: None.

scale() - Method in interface nxopen.annotations.LineWeldBuilder

Returns the scaling factor for the welding symbol
License requirements: None.

scale() - Method in interface nxopen.cae.CaeDOFSetDisplay

Returns the DOF Set display scaling factor this option specifies the scale of the graphic symbol relative to the size of the bounding box of the FE model.

scale() - Method in interface nxopen.cae.DeformationParameters

Returns the scale to be applied to the deformation value
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

scale() - Method in interface nxopen.cae.DurabilityFunctionExcitationBuilder

Returns the scale.

scale() - Method in interface nxopen.cae.DurabilityLoadPatternBuilder

Returns the scale.

scale() - Method in interface nxopen.cae.optimization.TBSShapeOptimizationParameters

Returns the scale factor
License requirements: None.

scale - Variable in class nxopen.cae.Post.Colorbar

scale() - Method in interface nxopen.cae.responsesimulation.RSDisplayObject

Returns the RS display scaling factor this option specifies the scale of the graphic symbol relative to the size of the bounding box of the RS OBject.

scale() - Method in interface nxopen.cae.SimBCDisplay

Returns the BC display scaling factor this option specifies the scale of the graphic symbol relative to the size of the bounding box of the FE model.

scale() - Method in interface nxopen.cae.ThicknessBuilder

Returns the thickness scale
License requirements: None.

SCALE - Static variable in class nxopen.cam.InspectionOperationTransformBuilder.Transform

scale

SCALE - Static variable in class nxopen.cam.OperationTransformBuilder.Transform

scale

scale() - Method in interface nxopen.CGMBuilder

Returns the scale factor to be used when creating a CGM.

SCALE - Static variable in class nxopen.die.QuickBinderWrapBuilder.EditSizeType

scale() - Method in interface nxopen.display.DecalBuilder

Returns the decal scale
License requirements: None.

scale() - Method in interface nxopen.display.IrayPlusSimpleMaterialEditorBuilder

Returns the scale
License requirements: studio_render ("UG STUDIO RENDER")
.

scale() - Method in interface nxopen.drawings.BaseViewBuilder

Returns the view scale
License requirements: None.

scale() - Method in interface nxopen.drawings.DetailViewBuilder

Returns the scale
License requirements: None.

scale() - Method in interface nxopen.drawings.DrawingViewBuilder

Returns the view scale
License requirements: None.

scale() - Method in interface nxopen.drawings.GeneralViewStyle

Returns the scale of a member view.

scale() - Method in interface nxopen.drawings.StandardViewsBuilder

Returns the view scale
License requirements: None.

scale() - Method in interface nxopen.drawings.ViewStyleDetailBuilder

Returns the scale toggle on the DETAIL tab of the View Style Dialog
License requirements: None.

scale() - Method in interface nxopen.drawings.ViewStyleGeneralBuilder

Returns the scale definition on the GENERAL tab of the View Style Dialog
License requirements: None.

scale() - Method in interface nxopen.drawings.ViewStyleProjectedBuilder

Returns the projected view style scale toggle on the PROJECTED tab of the View Style Dialog
License requirements: None.

scale() - Method in interface nxopen.drawings.ViewStyleSectionConstraintsBuilder

Returns the scale toggle on the SECTION CONSTRAINTS tab of the View Style Dialog
License requirements: None.

Scale - Interface in nxopen.features

Represents a scale feature.

SCALE - Static variable in class nxopen.features.StudioXformBuilder.Types

Deprecated.

Scale type of Xform

SCALE - Static variable in class nxopen.features.StudioXformBuilderEx.Types

Scale type of Xform

scale() - Method in interface nxopen.features.subdivision.SubdivisionSubdivideFaceBuilder

Returns the scale factor.

scale() - Method in interface nxopen.geometricanalysis.DupinBuilder

Returns the scale factor to apply to the display of the dupin indicatrix.

scale(TransformerData.ObjectType, double) - Method in interface nxopen.geometricutilities.TransformerData

Sets the scale factor.

SCALE - Static variable in class nxopen.MeshProfileString.Type

scale() - Method in interface nxopen.PartImporter

Returns the scale.

scale() - Method in interface nxopen.PrintPDFBuilder

Returns the scale factor to be used when creating a PDF document.

scale(double) - Method in interface nxopen.Sketch

Scale the sketch entities by the given scale factor.

scale - Variable in class nxopen.uf.UFCgm.Size

scale - Variable in class nxopen.uf.UFDrf.Areafill

scale - Variable in class nxopen.uf.UFDrf.CustomSymbol

scale(double, double[]) - Method in interface nxopen.uf.UFVec2

Refer to UF_VEC2_scale for documentation.

scale(double, double[]) - Method in interface nxopen.uf.UFVec3

Refer to UF_VEC3_scale for documentation.

scale(double, double[]) - Method in interface nxopen.uf.UFVec4

Refer to UF_VEC4_scale for documentation.

scale() - Method in interface nxopen.View

Returns the view scale
License requirements: None.

scale() - Method in interface nxopen.Xform

Returns the scale
License requirements: None.

scale1 - Variable in class nxopen.uf.UFVec2.ComponentsData

scale2 - Variable in class nxopen.uf.UFVec2.ComponentsData

SCALE_ACADWIDTH_FACTOR_WITH_SPECIFIED_VALUE - Static variable in class nxopen.DxfdwgImporter.AspectRatioOptions

SCALE_AND_ASPECT_RATIO - Static variable in class nxopen.annotations.TextWithSymbolsBuilder.SymbolSizingMethod

Size using scale and aspect ratio

SCALE_ASPECT_RATIO - Static variable in class nxopen.annotations.UserSymbolPreferences.SizeType

scale and aspect ratio

SCALE_ASPECT_RATIO - Static variable in class nxopen.uf.UFDrf.UdsSizeType

SCALE_FACTOR - Static variable in class nxopen.cae.ConvexMeshBuilder.OffsetMethodOption

SCALE_FACTOR - Static variable in class nxopen.CGMBuilder.SizeOption

Scale Factor, scales the CGM based on user defined scale field

SCALE_FACTOR - Static variable in class nxopen.PrintPDFBuilder.SizeOption

Scale Factor

SCALE_INTEGER - Static variable in class nxopen.uistyler.StylerItem.ItemType

Scale item

SCALE_ITEM - Static variable in class nxopen.tooling.SpreadsheetData.ParameterStatus

This is a scale item

SCALE_ITEM - Static variable in class nxopen.tooling.SpreadsheetDataParameter.Status

This is a scale item

SCALE_MODEL - Static variable in class nxopen.cae.NodeTranslateBuilder.MethodType

scale model

SCALE_NXASPECTRATIO_WITH_SPECIFIED_VALUE - Static variable in class nxopen.DxfdwgCreator.WidthfactorMethodOptions

SCALE_REAL - Static variable in class nxopen.uistyler.StylerItem.ItemType

Real Scale item

SCALE_TYPE_AXISYMMETRIC - Static variable in class nxopen.uf.UFModl.ScaleType

SCALE_TYPE_GENERAL - Static variable in class nxopen.uf.UFModl.ScaleType

SCALE_TYPE_UNIFORM - Static variable in class nxopen.uf.UFModl.ScaleType

SCALE_UNIFORMLY - Static variable in class nxopen.features.StudioXformBuilder.ScalingDirectionType

Deprecated.

Scale uniformly

SCALE_X - Static variable in class nxopen.geometricutilities.TransformerData.ObjectType

SCALE_Y - Static variable in class nxopen.geometricutilities.TransformerData.ObjectType

SCALE_Z - Static variable in class nxopen.geometricutilities.TransformerData.ObjectType

SCALEABOUTOBJECTCENTER - Static variable in class nxopen.features.StudioXformBuilderEx.ScalingCenterType

Scale center at the object center

SCALEABOUTPOINT - Static variable in class nxopen.features.StudioXformBuilderEx.ScalingCenterType

Scale center at a point

SCALEABOUTSELECTED - Static variable in class nxopen.features.StudioXformBuilderEx.ScalingCenterType

Scale center at the selected object

scaleAlongAxis() - Method in interface nxopen.features.ScaleBuilder

Returns the scale along axis
License requirements: None.

scaleAlongXDirection() - Method in interface nxopen.features.ScaleCurveBuilder

Returns the scale along xdirection
License requirements: None.

scaleAlongYDirection() - Method in interface nxopen.features.ScaleCurveBuilder

Returns the scale along ydirection
License requirements: None.

scaleAlongZDirection() - Method in interface nxopen.features.ScaleCurveBuilder

Returns the scale along zdirection
License requirements: None.

scaleBc(SimSolution, SimBC, double) - Method in interface nxopen.cae.SolutionManager

Set scale factor on bc in a solution
License requirements: nx_masterfem ("Finite Element Modeling")
.

scaleBc(SimSolutionStep, SimBC, double) - Method in interface nxopen.cae.StepManager

Set scale factor on bc in a step
License requirements: nx_masterfem ("Finite Element Modeling")
.

ScaleBuilder - Interface in nxopen.features

Represents a Scale builder.

ScaleBuilder.Types - Class in nxopen.features

Scale type

scaleCharacterHeightFactor() - Method in interface nxopen.drawings.ViewDetailLabelBuilder

Returns the scale character height factor
License requirements: None.

scaleCharacterHeightFactor() - Method in interface nxopen.drawings.ViewLabelBuilder

Returns the scale character height factor
License requirements: None.

scaleCharacterHeightFactor() - Method in interface nxopen.drawings.ViewSectionLabelBuilder

Returns the scale character height factor
License requirements: None.

ScaleCurve - Interface in nxopen.features

Represents a scale curve feature
To create or edit an instance of this class, use ScaleCurveBuilder

Created in NX11.0.0

ScaleCurveBuilder - Interface in nxopen.features

Represents a Features.ScaleCurveBuilder builder
To create a new instance of this class, use CurveFeatureCollection.createScaleCurveBuilder(nxopen.features.ScaleCurve)
Default values.

ScaleCurveBuilder.ScaleCurveType - Class in nxopen.features

Scale type

ScaleData() - Constructor for class nxopen.drawings.DrawingSheet.ScaleData

scaleDenominator() - Method in interface nxopen.drawings.DrawingSheetBuilder

Returns the denominator of a custom scale
License requirements: None.

scaleDenominator() - Method in interface nxopen.features.shipdesign.ExpansionDrawingBuilder

Returns the denominator of a custom scale
License requirements: None.

scaleEnum() - Method in interface nxopen.linedesigner.InsertSheetBuilder

Returns the scale enum
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

scaleExpression() - Method in interface nxopen.annotations.CustomSymbolData

Deprecated.

Deprecated in NX9.0.0. Use DraftingCustomSymbolBuilder for Drafting Custom Symbol and PmiCustomSymbolBuilder for PMI Custom Symbol objects.

scaleFactor() - Method in interface nxopen.cae.ConvexMeshBuilder

Returns the scale factor
License requirements: None.

scaleFactor() - Method in interface nxopen.cae.NodeTranslateBuilder

Returns the scale factor
License requirements: None.

scaleFactor() - Method in interface nxopen.cae.PostAnnotationPreference

Returns the annotation scale factor
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

scaleFactor() - Method in interface nxopen.cam.InspectionGraphicalReportOutputBuilder

Returns the scale factor
License requirements: None.

scaleFactor() - Method in interface nxopen.cam.InspectionOperationTransformBuilder

Returns the scale factor
License requirements: None.

scaleFactor() - Method in interface nxopen.cam.OperationTransformBuilder

Returns the scale factor
License requirements: None.

scaleFactor() - Method in interface nxopen.cam.WorkInstructionOutputBuilder

Returns the scale factor
License requirements: None.

scaleFactor() - Method in interface nxopen.features.LocalScaleCurveBuilder

Returns the scale factor
License requirements: None.

scaleFactor() - Method in interface nxopen.geometricutilities.CombOptionsBuilder

Returns the scale factor
License requirements: None.

scaleFactor() - Method in interface nxopen.geometricutilities.ScalingMethodBuilder

Returns the scale factor.

scaleFactor() - Method in interface nxopen.motion.PortAssociation

Returns the scale factor
License requirements: mechanisms ("MECHANISMS")
.

scaleFactor() - Method in interface nxopen.tooling.StripLayoutStationInformationBuilder

Returns the text scale size
License requirements: None.

scaleFactor - Variable in class nxopen.uf.UFCurve.AskSplineSapData

scaleFactor - Variable in class nxopen.uf.UFDisp.SrfanlData

scaleFactor - Variable in class nxopen.uf.UFDrf.WeldSymbols

scaleFactorDistance - Variable in class nxopen.uf.UFDisp.SrfanlData

scaleFactorMax - Variable in class nxopen.uf.UFDisp.SrfanlData

scaleFactorMean - Variable in class nxopen.uf.UFDisp.SrfanlData

scaleFactorMin - Variable in class nxopen.uf.UFDisp.SrfanlData

scaleFactorNormal - Variable in class nxopen.uf.UFDisp.SrfanlData

scaleFactorSec - Variable in class nxopen.uf.UFDisp.SrfanlData

scaleFactorSlope - Variable in class nxopen.uf.UFDisp.SrfanlData

scaleFactorU - Variable in class nxopen.uf.UFDisp.SrfanlData

scaleFactorV - Variable in class nxopen.uf.UFDisp.SrfanlData

scaleFolder(SimSolution, SimLbcFolder, double) - Method in interface nxopen.cae.SolutionManager

Set scale factor on bc folder in a solution
License requirements: nx_masterfem ("Finite Element Modeling")
.

scaleFolder(SimSolutionStep, SimLbcFolder, double) - Method in interface nxopen.cae.StepManager

Set scale factor on bc folder in a step
License requirements: nx_masterfem ("Finite Element Modeling")
.

scaleGlobalBc(SimBC, double) - Method in interface nxopen.cae.StepManager

Set scale factor on bc in global bc group in solution
License requirements: nx_masterfem ("Finite Element Modeling")
.

scaleGlobalFolder(SimLbcFolder, double) - Method in interface nxopen.cae.StepManager

Set scale factor on bc folder in global bc group in solution
License requirements: nx_masterfem ("Finite Element Modeling")
.

scaleGlobalLoadset(SimLoadSet, double) - Method in interface nxopen.cae.StepManager

Set scale factor on loadset in global bc group in solution
License requirements: nx_masterfem ("Finite Element Modeling")
.

scaleLabel() - Method in interface nxopen.drawings.GeneralViewStyle

Returns the display of scale label.

scaleLabel() - Method in interface nxopen.drawings.ViewStyleGeneralBuilder

Returns the scale label toggle on the GENERAL tab of the View Style Dialog
License requirements: None.

scaleLabel - Variable in class nxopen.uf.UFDraw.ViewLabelParms

scaleLabelPrefix - Variable in class nxopen.uf.UFDraw.ViewLabelParms

scaleLimits() - Method in interface nxopen.blockstyler.DoubleBlock

Returns the ScaleLimits
License requirements: None.

scaleLimits() - Method in interface nxopen.blockstyler.IntegerBlock

Returns the ScaleLimits
License requirements: None.

scaleLoadset(SimSolution, SimLoadSet, double) - Method in interface nxopen.cae.SolutionManager

Set scale factor on loadset in a solution
License requirements: nx_masterfem ("Finite Element Modeling")
.

scaleLoadset(SimSolutionStep, SimLoadSet, double) - Method in interface nxopen.cae.StepManager

Set scale factor on loadset in a step
License requirements: nx_masterfem ("Finite Element Modeling")
.

scaleMaxLimitLabel() - Method in interface nxopen.blockstyler.DoubleBlock

Returns the ScaleMaxLimitLabel
License requirements: None.

scaleMaxLimitLabel() - Method in interface nxopen.blockstyler.IntegerBlock

Returns the ScaleMaxLimitLabel
License requirements: None.

scaleMinLimitLabel() - Method in interface nxopen.blockstyler.DoubleBlock

Returns the ScaleMinLimitLabel
License requirements: None.

scaleMinLimitLabel() - Method in interface nxopen.blockstyler.IntegerBlock

Returns the ScaleMinLimitLabel
License requirements: None.

scaleModified() - Method in interface nxopen.tooling.AssemblyDrawingBuilder

Returns the scale modified attribute
License requirements: None.

scaleNumerator() - Method in interface nxopen.drawings.DrawingSheetBuilder

Returns the numerator of a custom scale
License requirements: None.

scaleNumerator() - Method in interface nxopen.features.shipdesign.ExpansionDrawingBuilder

Returns the numerator of a custom scale
License requirements: None.

scaleOnFirstDrivingDimension() - Method in interface nxopen.preferences.SessionSketch

Returns the scale on first driving dimension option
License requirements: None.

scaleOrigin() - Method in interface nxopen.features.LocalScaleCurveBuilder

Returns the scale origin
License requirements: None.

scaleOtherDirection() - Method in interface nxopen.features.ScaleBuilder

Returns the scale other direction
License requirements: None.

scaleParameter - Variable in class nxopen.optimization.DesignStudyBuilder.DesignStudyVariable

Scale parameter

scaleParentheses - Variable in class nxopen.uf.UFDraw.ViewLabelParms

scalePosition() - Method in interface nxopen.drawings.ViewDetailLabelBuilder

Returns the scale position
License requirements: None.

scalePosition() - Method in interface nxopen.drawings.ViewLabelBuilder

Returns the scale position
License requirements: None.

scalePosition() - Method in interface nxopen.drawings.ViewSectionLabelBuilder

Returns the scale position
License requirements: None.

ScalePositionTypes - Class in nxopen.drawings

scale Position type

scalePrefix() - Method in interface nxopen.drawings.ViewDetailLabelBuilder

Returns the scale prefix
License requirements: None.

scalePrefix() - Method in interface nxopen.drawings.ViewLabelBuilder

Returns the scale prefix
License requirements: None.

scalePrefix() - Method in interface nxopen.drawings.ViewSectionLabelBuilder

Returns the scale prefix
License requirements: None.

scaleSpeed() - Method in interface nxopen.geometricutilities.PlayButtonsBuilder

Returns the scale speed
License requirements: None.

scaleStep() - Method in interface nxopen.geometricutilities.PlayButtonsBuilder

Returns the scale step
License requirements: None.

scaleType() - Method in interface nxopen.drawings.ViewScaleBuilder

Returns the scale type
License requirements: None.

scaleType() - Method in interface nxopen.features.ScaleCurveBuilder

Returns the scale type
License requirements: None.

scaleType() - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder

Returns the scaling type of curvature values.

scaleType - Variable in class nxopen.uf.UFModl.UdfsExp

scaleValue - Variable in class nxopen.cae.Result.ResultParameters

Deprecated.

scaleValue - Variable in class nxopen.uf.UFDraw.AskViewParmScaleData

scaleValue - Variable in class nxopen.uf.UFDraw.AskViewScaleData

ScaleValueFormatTypes - Class in nxopen.drawings

scale value format type

scaleXdirection() - Method in interface nxopen.features.ScaleBuilder

Returns the scale xdirection
License requirements: None.

scaleYdirection() - Method in interface nxopen.features.ScaleBuilder

Returns the scale ydirection
License requirements: None.

scaleZdirection() - Method in interface nxopen.features.ScaleBuilder

Returns the scale zdirection
License requirements: None.

scaling - Variable in class nxopen.uf.UFModlFeatures.AskSweepData

scaling(double[], double[]) - Method in interface nxopen.uf.UFMtx4

Refer to UF_MTX4_scaling for documentation.

SCALING_CURVE - Static variable in class nxopen.features.StyledSweepBuilder.ScalingMethodOptions

Scaling Curve

scalingArbitraryPlane() - Method in interface nxopen.features.StudioXformBuilder

Deprecated.

Deprecated in NX8.5.0. Use StudioXformBuilderEx instead.

scalingArbitraryPlane() - Method in interface nxopen.features.StudioXformBuilderEx

Returns the scaling arbitrary plane
License requirements: None.

scalingArbitraryVector() - Method in interface nxopen.features.StudioXformBuilder

Deprecated.

Deprecated in NX8.5.0. Use StudioXformBuilderEx instead.

scalingArbitraryVector() - Method in interface nxopen.features.StudioXformBuilderEx

Returns the scaling arbitrary vector
License requirements: None.

scalingCenter() - Method in interface nxopen.features.StudioXformBuilder

Deprecated.

Deprecated in NX8.5.0. Use StudioXformBuilderEx instead.

scalingCenter() - Method in interface nxopen.features.StudioXformBuilderEx

Returns the scaling center
License requirements: None.

scalingCenterPoint() - Method in interface nxopen.features.StudioXformBuilderEx

Returns the scaling center point
License requirements: None.

scalingCurve() - Method in interface nxopen.features.StyledSweepBuilder

Returns the scaling curve
License requirements: None.

scalingCurve() - Method in interface nxopen.geometricutilities.ScalingMethodBuilder

Returns the scaling curve.

scalingDirection() - Method in interface nxopen.features.StudioXformBuilder

Deprecated.

Deprecated in NX8.5.0. Use StudioXformBuilderEx instead.

scalingDirection() - Method in interface nxopen.features.StudioXformBuilderEx

Returns the scaling direction
License requirements: None.

scalingFactor - Variable in class nxopen.uf.UFSf.AskLvNxData

scalingMethod() - Method in interface nxopen.features.subdivision.SubdivisionExtrudeCageBuilder

Returns the scaling method.

scalingMethod() - Method in interface nxopen.features.subdivision.TransformCageData

Returns the scaling method.

scalingMethod() - Method in interface nxopen.features.SweptBuilder

Returns the scaling method.

scalingMethod() - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder

Returns the scaling method
License requirements: None.

scalingMethod() - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder

Returns the scaling method
License requirements: None.

scalingMethod() - Method in interface nxopen.geometricanalysis.SurfaceIntersectionBuilder

Returns the scaling method
License requirements: None.

ScalingMethodBuilder - Interface in nxopen.geometricutilities

Represents a ScalingMethodBuilder
Created in NX5.0.0

ScalingMethodBuilder.BlendingFunctionTypes - Class in nxopen.geometricutilities

This enum represents the blending function type, if the scaling by BlendingFunction is selected.

ScalingMethodBuilder.ScalingOptions - Class in nxopen.geometricutilities

This enum represents the scaling method option.

scalingMethodOption() - Method in interface nxopen.features.StyledSweepBuilder

Returns the scaling method option
License requirements: None.

scalingOption() - Method in interface nxopen.geometricutilities.ScalingMethodBuilder

Returns the scaling method option.

scalingPoint() - Method in interface nxopen.geometricutilities.ScalingMethodBuilder

Returns the scaling point.

ScalingSetBuilder - Interface in nxopen.geometricutilities

Represents a ScalingSetBuilder
Created in NX6.0.0

ScalingSetBuilderList - Interface in nxopen.geometricutilities

Represents a list of objects.

scalingSetList() - Method in interface nxopen.features.StyledSweepBuilder

Returns the list of scaling sets
License requirements: None.

scalingType() - Method in interface nxopen.cae.CorrelAlignmentBuilder

Returns the scaling type
License requirements: None.

scalingType() - Method in interface nxopen.display.DecalBuilder

Returns the scaling type
License requirements: None.

scalingValue() - Method in interface nxopen.cae.CorrelAlignmentBuilder

Returns the scaling value
License requirements: None.

scalingValue() - Method in interface nxopen.geometricutilities.ScalingSetBuilder

Returns the scaling value expression
License requirements: None.

SCALLOP - Static variable in class nxopen.cam.BladeCutLevels.DepthPerCutTypes

Scallop

SCALLOP - Static variable in class nxopen.cam.DmRadBuilder.RadStepoverTypeType

Scallop

SCALLOP - Static variable in class nxopen.cam.DPMItpBuilder.StepoverTypeOption

stepover scallop height

SCALLOP - Static variable in class nxopen.cam.StepoverBuilder.StepoverTypes

Scallop

scallopBuilder() - Method in interface nxopen.cam.StepoverBuilder

Returns the scallop height
License requirements: None.

scallopDistance() - Method in interface nxopen.cam.BladeCutLevels

Returns the scallop distance
License requirements: None.

scanCurveMode() - Method in interface nxopen.cam.InspectionMethodBuilder

Returns the scan curve mode
License requirements: None.

scanForce() - Method in interface nxopen.cam.InspectionMethodBuilder

Returns the scan force
License requirements: None.

scanModeType() - Method in interface nxopen.cam.InspectionMethodBuilder

Returns the 3,5 axis scan mode type
License requirements: None.

scanModeType() - Method in interface nxopen.cam.InspectionScanArcBuilder

Returns the 3,5 axis mode type
License requirements: None.

scanModeType() - Method in interface nxopen.cam.InspectionScanHelixBuilder

Returns the 3,5 axis mode type
License requirements: None.

scanModeType() - Method in interface nxopen.cam.InspectionScanLineBuilder

Returns the 3,5 axis mode type
License requirements: None.

scanPhysicsObject(Component) - Method in interface nxopen.mechatronics.ReplacePhysicsBuilder

Scans physics objects in context
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

scanSpeed() - Method in interface nxopen.cam.InspectionMethodBuilder

Returns the scan speed
License requirements: None.

scanSpeed() - Method in interface nxopen.cam.InspectionScanArcBuilder

Returns the builder for scan speed
License requirements: None.

scanSpeed() - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder

Returns the builder for scan speed
License requirements: None.

scanSpeed() - Method in interface nxopen.cam.InspectionScanCurveBuilder

Returns the builder for scan speed
License requirements: None.

scanSpeed() - Method in interface nxopen.cam.InspectionScanHelixBuilder

Returns the builder for scan speed
License requirements: None.

scanSpeed() - Method in interface nxopen.cam.InspectionScanLineBuilder

Returns the builder for scan speed
License requirements: None.

SCANTLING - Static variable in class nxopen.features.shipdesign.SeamBuilder.Types

Scantling seam, will allow for changing stock across the seam.

SCANTLING_SEAM - Static variable in class nxopen.features.shipdesign.ShipDesignPreferencesBuilder.Types

Scantling Seam type

scantlingSplitSystem() - Method in interface nxopen.features.shipdesign.SeamBuilder

Returns the indication if the scantling seams should split the system by default.

scatter() - Method in interface nxopen.assemblies.DesignElementBuilder

Returns the option to determine whether to scatter design elements during creation
License requirements: None.

SCATTER - Static variable in class nxopen.cae.xyplot.GraphStyle

Option to display plot in scatter style

scattering - Variable in class nxopen.uf.UFView.LightAttributes

ScatterStyleSetting - Interface in nxopen.cae.xyplot

Represents the scatter display style.

scCollector() - Method in interface nxopen.cam.GeometrySet

Returns the sc collector
License requirements: None.

ScCollector - Interface in nxopen

Sc Collector
To create a new instance of this class, use ScCollectorCollection.createCollector()

Created in NX4.0.0

ScCollectorCollection - Interface in nxopen

This class contains the factory methods for creating a sc collector.

ScCollectorList - Interface in nxopen

Represents a list of objects.

scCollectors() - Method in interface nxopen.BasePart

Returns the ScCollectorCollection instance belonging to this part .

scenarioDescriptor() - Method in interface nxopen.cae.PostScenarioParameters

Returns the scenario descriptor used by the post scenario.

scenarioName() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

Returns the name of the scenario model containing the suspension template.

scenarioNames - Variable in class nxopen.uf.UFSf.LocateScenariosData

Scene - Interface in nxopen.display

Represents a Scene A scene is comprised of background, stage, reflection, lights and image-based lighting subobjects.

SCENE - Static variable in class nxopen.LightType

A scene lights is a light whose parameters, except for intensity, are fixed.

SCENE_IMAGES - Static variable in class nxopen.geometricanalysis.ReflectionAnalysisBuilder.Types

Scene image.

sceneImageOption() - Method in interface nxopen.geometricanalysis.ReflectionAnalysisBuilder

Returns the scene image option.

sceneLightType - Variable in class nxopen.Light.LightTypeData

is light_type is ...scene, this is the specific type of scene light

sceneName() - Method in interface nxopen.display.ExtractScene

Returns the scene name
License requirements: None.

SCIENTIFIC - Static variable in class nxopen.cae.Post.Format

SCO - Static variable in class nxopen.cae.CorrelShapemetrictype

Shape metric type is SEREP-Cross-Orthogonality

scop() - Method in interface nxopen.UFSession

scope() - Method in interface nxopen.annotations.HoleTableSettingsHoleFiltersBuilder

Returns the scope
License requirements: None.

scope() - Method in interface nxopen.annotations.TableColumnBuilder

Returns the scope enum specifies whether settings are to be applied to all cells of column or only cells of new rows in column.

scope() - Method in interface nxopen.features.shipdesign.ShipFeatureConverter

Returns the conversion scope
License requirements: None.

scopeEnum() - Method in interface nxopen.cam.InspectionLinkPmiBuilder

Returns the scope of the Link PMI function
License requirements: None.

scopeType() - Method in interface nxopen.visualreporting.VisualReport

Returns the VisualReport.ScopeTypeOption of this VisualReport .

scopeTypeOfVisualReport() - Method in interface nxopen.visualreporting.VisualReportBuilder

Returns the VisualReport.ScopeTypeOption of the VisualReport being built by this builder.

SCOUTExportBuilder - Interface in nxopen.mechatronics

Represents a SCOUTExportBuilder
To create a new instance of this class, use PhysicsManager.createSCOUTExportBuilder()

Created in NX9.0.0

SCOUTExportBuilder.ExportFileType - Class in nxopen.mechatronics

Represents the export file type.

SCOUTImportBuilder - Interface in nxopen.mechatronics

Represents a SCOUTImportBuilder , Nothing happened and no object returned when commit this builder
To create a new instance of this class, use PhysicsManager.createSCOUTImportBuilder()

Created in NX9.0.0

SCRAP - Static variable in class nxopen.tooling.ScrapDesignBuilder.RemoveType

Captures normal scraps

SCRAP_AREA - Static variable in class nxopen.die.FillAreaBuilder.Types

Remove the volume instead of filling.

scrapDesign() - Method in interface nxopen.tooling.ToolingManager

Returns the ScrapDesignCollection instance belonging to this part .

ScrapDesignBuilder - Interface in nxopen.tooling

Represents a scrap design builder
To create a new instance of this class, use ScrapDesignCollection.createScrapDesignBuilder()
Default values.

ScrapDesignBuilder.AddonType - Class in nxopen.tooling

Specifies the add-on type

ScrapDesignBuilder.Body - Class in nxopen.tooling

Specifies the operation type of scraps

ScrapDesignBuilder.DefScrapType - Class in nxopen.tooling

Specifies the definition type of scraps

ScrapDesignBuilder.EditScrapType - Class in nxopen.tooling

Specifies the edit type of scraps

ScrapDesignBuilder.OvercutType - Class in nxopen.tooling

Specifies the over cut type, different type has different parameters

ScrapDesignBuilder.RemoveType - Class in nxopen.tooling

Specifies the removing type as filter

ScrapDesignBuilder.ScrapDefPosition - Class in nxopen.tooling

Specifies the position method of scraps, projecting method is normally used

ScrapDesignBuilder.ScrapDefType - Class in nxopen.tooling

Specifies the creation type of scraps

ScrapDesignBuilder.TrimNumType - Class in nxopen.tooling

Specifies the step of trimming process, the maximum is five

ScrapDesignCollection - Interface in nxopen.tooling

Represents a collection of ScrapDesign
To obtain an instance of this class, refer to ToolingManager

Created in NX6.0.0

scrapMethod() - Method in interface nxopen.tooling.ScrapDesignBuilder

Returns the scrap method, which includes boundary+sketch, hole boundary, close curves, boundary lines and existed sheet body
License requirements: None.

scrapPosition() - Method in interface nxopen.tooling.ScrapDesignBuilder

Returns the scrap position
License requirements: None.

scrapTol() - Method in interface nxopen.tooling.ScrapDesignBuilder

Returns the scrap tolerance, when fail to create scrap in some cases, this value can be decreased to try again
License requirements: None.

scrapTypeEnum() - Method in interface nxopen.tooling.ScrapDesignBuilder

Returns the scrap type enum
License requirements: None.

SCREEN - Static variable in class nxopen.annotations.LeaderAttachment

SCREEN_DISTANCE - Static variable in class nxopen.MeasureDistanceBuilder.DistanceType

SCREEN_POINT - Static variable in class nxopen.routing.SegmentManager.SubdivideSpacing

Screen Point

SCREEN_POINTS - Static variable in class nxopen.MeasureAngleBuilder.AngleType

SCREEN_POSITION - Static variable in class nxopen.annotations.AssociativityPointOption

Screen position

SCREEN_POSITION_POINT_TYPE - Static variable in class nxopen.uf.UFDrf.ObjectAssocPointType

SCREEN_SIZE_FIT - Static variable in class nxopen.uf.UFDisp.Context

SCREEN_SIZE_FIT - Static variable in class nxopen.userdefinedobjects.UserDefinedEvent.Reason

Fit operation for screen-size geometry

screenPointPercentage - Variable in class nxopen.routing.SegmentManager.SubdivideOption

Screen Point Percentage

screenPosition - Variable in class nxopen.Selection.SelectScreenPositionData

Selected screen position

screenTextSize() - Method in interface nxopen.display.TransientText

Returns the approximate size of the text (small, mendium, large) as measured on the graphics screen.

screenVisualization() - Method in interface nxopen.preferences.SessionPreferences

Returns object for doing Visualization Screen preferences settings applicable to entire session .

SCREW - Static variable in class nxopen.motion.JointDefine.Type

This joint type is used to couple the rotation and translation of a cylindrical joint to remove one degree of freedom.

SCREW - Static variable in class nxopen.tooling.FastenerAssy.StackTypeMethod

Screw type

SCREW_CLEARANCE - Static variable in class nxopen.geometricutilities.EndHoleData.FormOptions

Screw clearance

SCREW_CLEARANCE_HOLE - Static variable in class nxopen.annotations.HoleCalloutSettingsBuilder.Featuretype

SCREW_CLEARANCE_HOLE - Static variable in class nxopen.features.HolePackageBuilder.Types

Screw clearance hole

SCREW_JOINT - Static variable in class nxopen.uf.UFMotion.JointType

SCREW_SIZE - Static variable in class nxopen.annotations.HoleCalloutSettingsBuilder.Parametertype

screwCheck() - Method in interface nxopen.tooling.ValidCheckBuilder

Returns the screw check, to specify if screw check algorithm needs to be used
License requirements: None.

screwClearanceCounterboreDepth() - Method in interface nxopen.features.HolePackageBuilder

Returns the counter bore depth - this is applicable for screw clearence hole
License requirements: None.

screwClearanceCounterboreDiameter() - Method in interface nxopen.features.HolePackageBuilder

Returns the counter bore diameter - this is applicable for screw clearence hole
License requirements: None.

screwClearanceCountersinkAngle() - Method in interface nxopen.features.HolePackageBuilder

Returns the counter sink angle - this is applicable for screw clearence hole
License requirements: None.

screwClearanceCountersinkDiameter() - Method in interface nxopen.features.HolePackageBuilder

Returns the counter sink diameter - this is applicable for screw clearence hole
License requirements: None.

screwClearanceEndChamferAngle() - Method in interface nxopen.features.HolePackageBuilder

Returns the screw clearance end chamfer angle - this is applicable for screw clearance hole type
License requirements: None.

screwClearanceEndChamferAngle() - Method in interface nxopen.geometricutilities.EndHoleData

Returns the screw clearance end chamfer angle
License requirements: None.

screwClearanceEndChamferEnabled() - Method in interface nxopen.features.HolePackageBuilder

Returns the end chamfer enabled - this is applicable for screw clearance hole type
License requirements: None.

screwClearanceEndChamferEnabled() - Method in interface nxopen.geometricutilities.EndHoleData

Returns the screw clearance end chamfer enabled
License requirements: None.

screwClearanceEndChamferOffset() - Method in interface nxopen.features.HolePackageBuilder

Returns the screw clearance end chamfer offset - this is applicable for screw clearance hole type
License requirements: None.

screwClearanceEndChamferOffset() - Method in interface nxopen.geometricutilities.EndHoleData

Returns the screw clearance end chamfer offset
License requirements: None.

screwClearanceHoleDepth() - Method in interface nxopen.features.HolePackageBuilder

Returns the hole depth - this is applicable for screw clearance hole
License requirements: None.

screwClearanceHoleDiameter() - Method in interface nxopen.features.HolePackageBuilder

Returns the hole diameter - this is applicable for screw clearence hole
License requirements: None.

screwClearanceHoleForm() - Method in interface nxopen.features.HolePackageBuilder

Returns the hole form - this is applicable for screw clearance hole
License requirements: None.

screwClearanceNeckChamferAngle() - Method in interface nxopen.features.HolePackageBuilder

Returns the neck chamfer angle - this is applicable for screw clearence hole type with counterbore hole form
License requirements: None.

screwClearanceNeckChamferOffset() - Method in interface nxopen.features.HolePackageBuilder

Returns the neck chamfer offset - this is applicable for screw clearence hole type with counterbore hole form
License requirements: None.

screwClearanceReliefDepth() - Method in interface nxopen.features.HolePackageBuilder

Returns the relief depth - this is applicable for screw clearence hole type
License requirements: None.

screwClearanceReliefEnabled() - Method in interface nxopen.features.HolePackageBuilder

Returns the relief enabled - this is applicable for screw clearence hole type with countersunk hole form and threaded hole type
License requirements: None.

screwClearanceStartChamferAngle() - Method in interface nxopen.features.HolePackageBuilder

Returns the screw clearance start chamfer angle - this is applicable for screw clearance hole type
License requirements: None.

screwClearanceStartChamferAngle() - Method in interface nxopen.geometricutilities.EndHoleData

Returns the screw clearance start chamfer angle
License requirements: None.

screwClearanceStartChamferEnabled() - Method in interface nxopen.features.HolePackageBuilder

Returns the screw clearance start chamfer enabled - this is applicable for screw clearance hole type
License requirements: None.

screwClearanceStartChamferEnabled() - Method in interface nxopen.geometricutilities.EndHoleData

Returns the screw clearance start chamfer enabled
License requirements: None.

screwClearanceStartChamferOffset() - Method in interface nxopen.features.HolePackageBuilder

Returns the screw clearance start chamfer offset - this is applicable for screw clearance hole type
License requirements: None.

screwClearanceStartChamferOffset() - Method in interface nxopen.geometricutilities.EndHoleData

Returns the screw clearance start chamfer offset
License requirements: None.

screwClearanceTipAngle() - Method in interface nxopen.features.HolePackageBuilder

Returns the tip angle - this is applicable for screw clearance hole
License requirements: None.

screwFitOption() - Method in interface nxopen.features.HolePackageBuilder

Returns the screw fit Option - this is applicable for screw clearence hole
License requirements: None.

ScrewJoint - Interface in nxopen.mechatronics

Represents the Screw Joint.

ScrewJointBuilder - Interface in nxopen.mechatronics

Represents a ScrewJoint builder.

ScrewJointCollection - Interface in nxopen.mechatronics

Represents a collection of Screw Joint.

screwJoints() - Method in interface nxopen.mechatronics.PhysicsManager

Returns the ScrewJointCollection belonging to this part
Created in NX11.0.0

screwRatio() - Method in interface nxopen.motion.JointDefine

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using Motion.JointDefine#screwRatioExpression to query or edit it.

screwRatio - Variable in class nxopen.uf.UFMotion.Joint

screwRatioExpression() - Method in interface nxopen.motion.JointDefine

Returns the screw ratio expression.

screwSize() - Method in interface nxopen.features.HolePackageBuilder

Returns the screw size - this is applicable for screw clearence hole
License requirements: None.

screwSize() - Method in interface nxopen.geometricutilities.StartHoleData

Returns the screw size
License requirements: None.

screwSizeText() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder

Returns the screwSize text
License requirements: None.

screwSizeTextType() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder

Returns the ScrewSize setting
License requirements: None.

screwStandard() - Method in interface nxopen.features.HolePackageBuilder

Returns the screw standard - this is applicable for screw clearence hole type
License requirements: None.

screwType() - Method in interface nxopen.features.HolePackageBuilder

Returns the screw type - this is applicable for screw clearence hole
License requirements: None.

screwType() - Method in interface nxopen.geometricutilities.StartHoleData

Returns the screw type
License requirements: None.

script() - Method in interface nxopen.features.TextBuilder

Returns the script
License requirements: None.

scrollAreaSize() - Method in interface nxopen.cam.Preferences

Returns the scrollable items
License requirements: None.

SCROLLED_WINDOW - Static variable in class nxopen.uistyler.Dialog.ItemType

SCROLLED_WINDOW - Static variable in class nxopen.uistyler.StylerItem.ItemType

Scrolled Window item

ScrolledWindow - Interface in nxopen.blockstyler

Represents a Scrolled Window block .

ScrolledWindow - Interface in nxopen.uistyler

Represents a ScrolledWindow for UI Styler .

scrollFrozenColumn() - Method in interface nxopen.blockstyler.Tree

Returns the ScrollFrozenColumn.

scrollLineNumber() - Method in interface nxopen.blockstyler.Tree

Returns the ScrollLineNumber.

scrollTo(int, Node.Scroll) - Method in interface nxopen.blockstyler.Node

Scrolls horizontally and vertically to make the specific column of node appear on the tree window.

sCross - Variable in class nxopen.uf.UFModlFeatures.AskCurveMesh1Data

sCross - Variable in class nxopen.uf.UFModlFeatures.AskCurveMeshData

scRuleFactory() - Method in interface nxopen.Part

Returns the ScRuleFactory instance belonging to this part .

ScRuleFactory - Interface in nxopen

This class contains the factory methods for creating selection intent rules
To obtain an instance of this class, refer to Part

Created in NX3.0.0

SCUD_UPDOWN_CUT - Static variable in class nxopen.cam.ToolpathEventType

sCurve - Variable in class nxopen.uf.UFModl.MethodList

sdimension() - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder

Returns the dimension expression for S dimension
License requirements: None.

SDV - Static variable in class nxopen.cae.Result.Quantity

SDV_ELEMENT_INTEGRATION_POINT - Static variable in class nxopen.cae.Result.Quantity

SE_PART_ASM_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId

SEALER_BEAD_FEATURE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type

SEALER_FILL_FEATURE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type

SEAM - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSymbolType

SEAM - Static variable in class nxopen.annotations.Symbol

Specfies seam weld symbol

Seam - Interface in nxopen.features.shipdesign

Represents a ship design seam feature.

SEAM - Static variable in class nxopen.features.shipdesign.ShipnamesBuilderType

SEAM_NA_TYPE - Static variable in class nxopen.uf.UFWeld.Types

SEAM_TYPE - Static variable in class nxopen.uf.UFWeld.Types

SEAM_WELD - Static variable in class nxopen.uf.UFConstants

SEAM_WELD_NON_ASSOCIATIVE - Static variable in class nxopen.uf.UFConstants

SeamBlockBuilder - Interface in nxopen.features.shipdesign

Represents a SeamBlockBuilder
To create a new instance of this class, use BuiltUpBlockBuilder.createSeamBlockBuilder()

Created in NX9.0.0

SeamBlockBuilder.SeamType - Class in nxopen.features.shipdesign

this specifies seam type option

SeamBlockBuilderList - Interface in nxopen.features.shipdesign

Represents a list of objects.

SeamBuilder - Interface in nxopen.features.shipdesign

A SeamBuilder used to create or edit a ship design Seam feature.

SeamBuilder.DefinitionMethods - Class in nxopen.features.shipdesign

Used to indicate the method being used to define the seam locations.

SeamBuilder.StaggerShiftAlongMethods - Class in nxopen.features.shipdesign

Used to indicate the method being used to define which direction the seam stagger will shift along.

SeamBuilder.Types - Class in nxopen.features.shipdesign

Used to indicate the type of seam that is being created.

seamCurve() - Method in interface nxopen.features.shipdesign.CornerCutListItemBuilder

Returns the seam curve to resize the corner cut.

seamingObjects() - Method in interface nxopen.features.shipdesign.ManufacturingPreparationBuilder

Returns the objects that define straking seams
License requirements: None.

seamOption() - Method in interface nxopen.features.shipdesign.SeamBlockBuilder

Returns the seam option
License requirements: None.

seams() - Method in interface nxopen.features.shipdesign.DeleteSeamBuilder

Returns the seams to delete from the ship structural components
License requirements: None.

seams() - Method in interface nxopen.features.shipdesign.EditWeldingBuilder

Returns the objects to change the welding characteristics
License requirements: None.

seams() - Method in interface nxopen.features.shipdesign.SubSystemsBuilder

Returns the seams that you want to actually split the plate system or profile system.

seamSelection() - Method in interface nxopen.features.shipdesign.SeamBlockBuilder

Returns the seam selection
License requirements: None.

SEARCH - Static variable in class nxopen.routing.ControlPointCollection.CheckExisting

Search for an existing object, don't create a new object if one exists at the correct location.

SEARCH_DIRECTORIES - Static variable in class nxopen.LoadOptions.LoadMethod

use a list of search directories

searchattributes - Variable in class nxopen.routing.ReuseLibrary.SpecificationsGetPostPlacementRulesData

Search Attribute Titles.

searchBoundaryBodies() - Method in interface nxopen.tooling.ChannelFittingBuilder

Returns the value which specifies whether to auto search boundary bodies or not.

SearchCriteriaCalloutBuilder - Interface in nxopen.annotations

Represents SearchCriteriaCalloutBuilder
This is a sub-builder class and cannot be directly instantiated
.

SearchCriteriaCalloutBuilder.CalloutTypes - Class in nxopen.annotations

CalloutTypes

SearchCriteriaDatumFeatureSymbolBuilder - Interface in nxopen.annotations

Represents SearchCriteriaDatumFeatureSymbolBuilder
To create a new instance of this class, use SearchModelViewCollection.createSearchCriteriaDatumFeatureSymbolBuilder(nxopen.NXObject)

Created in NX7.5.0

SearchCriteriaDatumTargetBuilder - Interface in nxopen.annotations

Represents SearchCriteriaDatumTargetBuilder
To create a new instance of this class, use SearchModelViewCollection.createSearchCriteriaDatumTargetBuilder(nxopen.NXObject)

Created in NX7.5.0

SearchCriteriaDatumTargetBuilder.DatumTargetMovableOptions - Class in nxopen.annotations

Represents the search pmi movable datum target type

SearchCriteriaDatumTargetBuilder.DatumTargetTypes - Class in nxopen.annotations

Lists the search pmi datum target type

SearchCriteriaDimensionBuilder - Interface in nxopen.annotations

Represents SearchCriteriaDimensionBuilder
To create a new instance of this class, use SearchModelViewCollection.createSearchCriteriaDimensionBuilder(nxopen.NXObject)

Created in NX7.5.0

SearchCriteriaDimensionBuilder.DiameterSymbolOptions - Class in nxopen.annotations

Specifies diameter symbol option

SearchCriteriaDimensionBuilder.DimensionTypes - Class in nxopen.annotations

Specifies dimension types

SearchCriteriaDimensionBuilder.MeasurementTypes - Class in nxopen.annotations

Specifies measurement types

SearchCriteriaDimensionBuilder.RadialSymbolOptions - Class in nxopen.annotations

Specifies radial symbol option

SearchCriteriaDimensionBuilder.ToleranceTypes - Class in nxopen.annotations

Specifies tolerance types

SearchCriteriaFeatureControlFrameBuilder - Interface in nxopen.annotations

Represents SearchCriteriaFeatureControlFrameBuilder
To create a new instance of this class, use SearchModelViewCollection.createSearchCriteriaFeatureControlFrameBuilder(nxopen.NXObject)

Created in NX7.5.0

SearchCriteriaFeatureControlFrameBuilder.CharacteristicOptions - Class in nxopen.annotations

Lists the search pmi feature control frame type

SearchCriteriaFeatureControlFrameBuilder.CircleUOptions - Class in nxopen.annotations

Lists the status of pmi feature control frame circleU

SearchCriteriaFeatureControlFrameBuilder.FrameStyleOptions - Class in nxopen.annotations

Lists the search pmi feature control frame style

SearchCriteriaFeatureControlFrameBuilder.FreeStateOptions - Class in nxopen.annotations

Lists the status of pmi feature control frame free state

SearchCriteriaFeatureControlFrameBuilder.PrimaryDatumDualMCMOptions - Class in nxopen.annotations

Lists the type of pmi feature control frame primary datum dual MCM

SearchCriteriaFeatureControlFrameBuilder.PrimaryDatumMCMOptions - Class in nxopen.annotations

Lists the type of pmi feature control frame primary datum MCM

SearchCriteriaFeatureControlFrameBuilder.ProjectedOptions - Class in nxopen.annotations

Lists the status of pmi feature control frame projected

SearchCriteriaFeatureControlFrameBuilder.SecondaryDatumDualMCMOptions - Class in nxopen.annotations

Lists the type of pmi feature control frame secondary datum dual MCM

SearchCriteriaFeatureControlFrameBuilder.SecondaryDatumMCMOptions - Class in nxopen.annotations

Lists the type of pmi feature control frame secondary datum MCM

SearchCriteriaFeatureControlFrameBuilder.StatisticalOptions - Class in nxopen.annotations

Lists the status of pmi feature control frame statistical

SearchCriteriaFeatureControlFrameBuilder.TangentPlaneOptions - Class in nxopen.annotations

Lists the status of pmi feature control frame tangent plane

SearchCriteriaFeatureControlFrameBuilder.TertiaryDatumDualMCMOptions - Class in nxopen.annotations

Lists the type of pmi feature control frame tertiary datum dual MCM

SearchCriteriaFeatureControlFrameBuilder.TertiaryDatumMCMOptions - Class in nxopen.annotations

Lists the type of pmi feature control frame tertiary datum MCM

SearchCriteriaFeatureControlFrameBuilder.ToleranceMCMOptions - Class in nxopen.annotations

Lists the type of pmi feature control frame tolerance MCM

SearchCriteriaFeatureControlFrameBuilder.ZoneShapeOptions - Class in nxopen.annotations

Lists the type of pmi feature control frame zone shape

SearchCriteriaPMINotesBuilder - Interface in nxopen.annotations

Represents SearchCriteriaPMINotesBuilder
To create a new instance of this class, use SearchModelViewCollection.createSearchCriteriaPminotesBuilder(nxopen.NXObject)

Created in NX7.5.0

SearchCriteriaSurfaceFinishBuilder - Interface in nxopen.annotations

Represents SearchCriteriaSurfaceFinishBuilder
To create a new instance of this class, use SearchModelViewCollection.createSearchCriteriaSurfaceFinishBuilder(nxopen.NXObject)

Created in NX7.5.0

SearchCriteriaSurfaceFinishBuilder.SurfaceFinishTypes - Class in nxopen.annotations

Lists the search pmi surface finish type

SearchCriteriaSurfaceFinishBuilder.ToleranceTypeOptions - Class in nxopen.annotations

Lists the Tolerance type of surface finish value

searchDirectories - Variable in class nxopen.LoadOptions.SearchDirectoriesData

True indicates that sub-directories will be searched as well

SearchDirectoriesData() - Constructor for class nxopen.LoadOptions.SearchDirectoriesData

searchDirectoryList() - Method in interface nxopen.Catiav5Importer

Returns the serach directory list - This option allows you to specify a semicolon separated list of directories in which the translator can find components of an assembly.

searchDist() - Method in interface nxopen.cam.InspectionUVGridBuilder

Returns the search distance
License requirements: None.

searchDistance() - Method in interface nxopen.cae.EdgeSticherBuilder

Returns the search distance value to check overlap
License requirements: None.

searchDistance() - Method in interface nxopen.cae.LaminateImportZonesBuilder

Returns the search distance used to localize each FEM element in the FiberSIM zone mesh
License requirements: None.

searchDistance() - Method in interface nxopen.cae.WeldBuilder

Returns the distance within which to search for PIDs
License requirements: None.

searchDistance() - Method in interface nxopen.features.MidSurfaceByFacePairsBuilder

Returns the search distance to be used when searching for side 2 faces
License requirements: None.

searchExistingInterPartExpressionOnly() - Method in interface nxopen.assemblies.RelinkerBuilder

Returns the option to search existing inter part expression only or all expressions including regular ones.

searchingDestinationObject() - Method in interface nxopen.assemblies.RelinkerBuilder

Returns the searching destination object string.

searchingSourceObject() - Method in interface nxopen.assemblies.RelinkerBuilder

Returns the searching source object string.

searchingSourcePart() - Method in interface nxopen.assemblies.RelinkerBuilder

Returns the searching source part string.

searchingSourcePartAttribute() - Method in interface nxopen.assemblies.RelinkerBuilder

Returns the searching source part attribute string.

SearchManager - Interface in nxopen.shapesearch

This class manages Shape Search.

SearchModelView - Interface in nxopen.annotations

Represents a search model view
To create or edit an instance of this class, use SearchModelViewBuilder

Created in NX7.5.0

SearchModelViewBuilder - Interface in nxopen.annotations

Represents a SearchModelViewBuilder
To create a new instance of this class, use SearchModelViewCollection.createSearchModelViewBuilder(nxopen.ModelingView)
Default values.

SearchModelViewBuilder.PmiTypes - Class in nxopen.annotations

the search criteria pmitype

SearchModelViewBuilder.SearchScopeOptions - Class in nxopen.annotations

seaerch scope type

SearchModelViewBuilder.TextComparisionOptions - Class in nxopen.annotations

Represents the text comparision options

SearchModelViewBuilder.ValueComparisionOptions - Class in nxopen.annotations

Represents the value comparision options

SearchModelViewCollection - Interface in nxopen.annotations

Represents a collection of SearchModelView objects.

searchModelViews() - Method in interface nxopen.annotations.PmiManager

PMI search view collection .

searchRecords(String) - Method in interface nxopen.tooling.SpreadsheetData

Search the spreadsheet by the given conditions.

searchRegionButton() - Method in interface nxopen.tooling.MWDefineRegionsBuilder

Button to invoke searching region
License requirements: None.

searchResolution() - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder

Returns the search resolution.

searchResolution() - Method in interface nxopen.cae.DurabilityStressAxesBuilder

Returns the search resolution.

SearchResult - Interface in nxopen.pdm

Represents search query .

SearchResultCollection - Interface in nxopen.assemblies

A collection of SearchResultElement s.

searchResultElement() - Method in interface nxopen.assemblies.ExplicitSearchTerm

Returns the search result element of this search term.

SearchResultElement - Interface in nxopen.assemblies

A search result element can be produced as the result of a search performed in the context of a SubsetBuilder .

searchResults() - Method in interface nxopen.assemblies.SubsetBuilder

Returns the SearchResultCollection that contains current search results associated with this subset builder.

searchScope() - Method in interface nxopen.annotations.SearchModelViewBuilder

Returns the search scope
License requirements: None.

searchShapeSimilarity() - Method in interface nxopen.shapesearch.ShapeSearchBuilder

Returns the shape similarity to be set for search
License requirements: shape_search ("Shape Search")
.

searchShapeSize() - Method in interface nxopen.shapesearch.ShapeSearchBuilder

Returns the shape size to be set for search.

searchSubDirs - Variable in class nxopen.LoadOptions.SearchDirectoriesData

searchTemplateFromSiteDirectory() - Method in interface nxopen.report.ReportPreference

Returns the option indicates whether to use site template directory as start to choose a report template file
License requirements: None.

SearchTerm - Interface in nxopen.assemblies

A search term is used to specify a search for the contents of a Subset .

SearchTerm.SearchTermLogicType - Class in nxopen.assemblies

Logic used to determine how a search term is used within a recipe.

SearchTermBuilder - Interface in nxopen.assemblies

A SearchTermBuilder is used to create or edit an SearchTerm .

searchTermLogic() - Method in interface nxopen.assemblies.AttributeSearchTermBuilder

Returns the search term logic.

searchTermLogic() - Method in interface nxopen.assemblies.BoxSearchTermBuilder

Returns the search term logic.

searchTermLogic() - Method in interface nxopen.assemblies.PlaneSearchTermBuilder

Returns the search term logic.

searchTermLogic() - Method in interface nxopen.assemblies.ProximitySearchTermBuilder

Returns the search term logic.

searchTermLogic() - Method in interface nxopen.assemblies.RunContentProximitySearchTermBuilder

Returns the search term logic.

searchType() - Method in interface nxopen.shapesearch.ShapeSearchBuilder

Returns the search type
License requirements: shape_search ("Shape Search")
.

searchWavelinksInterpartExpressions() - Method in interface nxopen.assemblies.RelinkerBuilder

Searches WAVE links and interpart expressions.

seat() - Method in interface nxopen.HumanPosturePredictionBuilder

Returns the seat type: fixed seat or adjustable seat
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

SEAT_ASSEMBLY - Static variable in class nxopen.features.vehicledesign.SeatBeltAnchorageBuilder.AnchorageLocationTypes

seat assembly

seatAngleExp() - Method in interface nxopen.features.vehicledesign.BaseDataPassengerBuilder

Returns the passenger's seat angle.

SeatBeltAnchorage - Interface in nxopen.features.vehicledesign

Represents a seat belt anchorage feature
To create or edit an instance of this class, use SeatBeltAnchorageBuilder

Created in NX6.0.0

SeatBeltAnchorageBuilder - Interface in nxopen.features.vehicledesign

Represents a Features.VehicleDesign.SeatBeltAnchorage builder
To create a new instance of this class, use VehicleDesignCollection.createSeatBeltAnchorageBuilder(nxopen.features.vehicledesign.SeatBeltAnchorage)
Default values.

SeatBeltAnchorageBuilder.AnchorageLocationTypes - Class in nxopen.features.vehicledesign

the seat belt anchorage location type

SeatBeltAnchorageBuilder.ATLType - Class in nxopen.features.vehicledesign

the show ATL type

SeatBeltAnchorageBuilder.LOneLimitType - Class in nxopen.features.vehicledesign

the lone limit type

SeatBeltAnchorageBuilder.LowerAreaType - Class in nxopen.features.vehicledesign

the lower area type

SeatBeltAnchorageBuilder.LowerLimitType - Class in nxopen.features.vehicledesign

the lower limit type

SeatBeltAnchorageBuilder.LTwoLimitType - Class in nxopen.features.vehicledesign

the ltwo limit type

SeatBeltAnchorageBuilder.RoutingTypes - Class in nxopen.features.vehicledesign

the seat belt routing type

SeatBeltAnchorageBuilder.SeatPositionTypes - Class in nxopen.features.vehicledesign

the seat position type

SeatBeltAnchorageBuilder.SeatTypes - Class in nxopen.features.vehicledesign

the seat type

SeatBeltAnchorageBuilder.StandardTypes - Class in nxopen.features.vehicledesign

the standard type

SeatBeltAnchorageBuilder.UpperAreaType - Class in nxopen.features.vehicledesign

the upper area type

seatDirection() - Method in interface nxopen.features.vehicledesign.BaseDataPassengerBuilder

Returns the direction that this passenger is facing.

seatPosition() - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder

Returns the seat position type
License requirements: None.

seatReferencePoint() - Method in interface nxopen.features.vehicledesign.AllAroundVisionBuilder

Returns the seat reference point(SgRP).

seatReferencePoint() - Method in interface nxopen.features.vehicledesign.BaseDataDriverBuilder

Returns the driver seat reference point.

seatReferencePoint() - Method in interface nxopen.features.vehicledesign.BaseDataPassengerBuilder

Returns the passenger's seat reference point.

seatReferencePointActive() - Method in interface nxopen.features.vehicledesign.BaseDataDriverBuilder

Returns the status to indicate whether the driver seat reference point is active or not.

seatReferencePointActive() - Method in interface nxopen.features.vehicledesign.BaseDataPassengerBuilder

Returns the status to indicate whether the passenger seat reference point is active or not.

seatTrackAngleA19() - Method in interface nxopen.HumanPosturePredictionBuilder

Returns the track angle A19 of seat data, it should be set for Class A driver, Class A front passenger and Class B driver
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

seatType() - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder

Returns the seat type
License requirements: None.

secDatLetter() - Method in interface nxopen.cam.InspectionAlignmentBuilder

Returns the sec dat letter
License requirements: None.

secdir - Variable in class nxopen.uf.UFSo.DirrOnSurfData

secdir - Variable in class nxopen.uf.UFSo.OffsetSurfCvtrData

secDirection() - Method in interface nxopen.cam.InspectionAlignmentBuilder

Returns the sec direction
License requirements: None.

SECOND - Static variable in class nxopen.annotations.ArrowDisplay

Displays arrow to the second object selected to create the dimension

SECOND - Static variable in class nxopen.annotations.ExtensionLineDisplay

Displays extension line attached to the second object selected to create the dimension

SECOND - Static variable in class nxopen.facet.SewFacetBodyBuilder.VertexIndex

Index of the second vertex

SECOND - Static variable in class nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilderEx.SphereSubdivisionLevel

SECOND - Static variable in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Wad

Second wrap around distance line

SECOND - Static variable in class nxopen.tooling.AutoDimensionBuilder.TextFontType

SECOND - Static variable in class nxopen.tooling.BurringInsertBuilder.BurringPunchTypes

use second type

SECOND - Static variable in class nxopen.tooling.HoleDatumSymbolBuilder.SymbolType

second - Variable in class nxopen.uf.UFPs.KernelVersion

SECOND - Static variable in class nxopen.weld.JointExitBuilder.BodySide

the other side.

SECOND - Static variable in class nxopen.weld.WeldFacesetIndex

second face set

SECOND - Static variable in class nxopen.weld.WeldGroupIdColor

Second Group Id Color Index

SECOND_AND_THIRD_POINT - Static variable in class nxopen.features.DatumPlaneBuilder.UseArcLength

Only second and third point use arclength

SECOND_AXIS - Static variable in class nxopen.cae.PostGraphAlongPathBuilder.CoordinateSysAxis

SECOND_LINK - Static variable in class nxopen.uf.UFMotion.ReferenceFrame

SECOND_POINT - Static variable in class nxopen.features.DatumAxisBuilder.UseArcLength

Only second point uses arclength

SECOND_POINT - Static variable in class nxopen.features.DatumPlaneBuilder.UseArcLength

Only second point uses arclength

SECOND_RUN - Static variable in class nxopen.routing.IntegrateRunsBuilder.Enum

SECOND_SET - Static variable in class nxopen.motion.PackagingInterferenceBuilder.Frame

Interference solids positioned relative to interfering links in second set.

SECOND_STRETCH_WALL - Static variable in class nxopen.die.AddendumSectionBuilder.SegmentType

Update second stretch wall segment.

secondAdoptionCurve() - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder

Returns the second adoption curve.

secondArrowheadCfw - Variable in class nxopen.uf.UFDrf.LineArrowPreferences

secondArrowheadColor() - Method in interface nxopen.annotations.LineArrowStyleBuilder

Returns the second arrowhead color
License requirements: None.

secondArrowheadFont() - Method in interface nxopen.annotations.LineArrowStyleBuilder

Returns the second arrowhead font
License requirements: None.

secondArrowheadWidth() - Method in interface nxopen.annotations.LineArrowStyleBuilder

Returns the second arrowhead width
License requirements: None.

secondArrowLineCfw - Variable in class nxopen.uf.UFDrf.LineArrowPreferences

secondArrowLineColor() - Method in interface nxopen.annotations.LineArrowStyleBuilder

Returns the second arrow line color
License requirements: None.

secondArrowLineFont() - Method in interface nxopen.annotations.LineArrowStyleBuilder

Returns the second arrow line font
License requirements: None.

secondArrowLineWidth() - Method in interface nxopen.annotations.LineArrowStyleBuilder

Returns the second arrow line width
License requirements: None.

secondArrowType() - Method in interface nxopen.annotations.LineAndArrowPreferences

Returns the second arrow type
License requirements: None.

secondArrowType() - Method in interface nxopen.annotations.LineArrowStyleBuilder

Returns the second arrowhead type
License requirements: None.

secondArrowType - Variable in class nxopen.uf.UFDrf.LineArrowPreferences

SECONDARY - Static variable in class nxopen.display.DynamicSectionTypes.ActivePlane

Secondary

SECONDARY - Static variable in class nxopen.features.sheetmetal.SheetmetalManagerTabType

secondary tab

secondary() - Method in interface nxopen.mechatronics.GanttLinkerBuilder

Returns the accessor for second operation tag which is going to be linked
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

SECONDARY - Static variable in class nxopen.ModelingView.SectionPlane

Deprecated.

Secondary

secondary - Variable in class nxopen.uf.UFGdt.DrfData

secondary1() - Method in interface nxopen.features.shipdesign.PlateSystemBuilder

Returns the direction of the stiffener flange.

secondary1OnReference() - Method in interface nxopen.features.shipdesign.PlateSystemBuilder

Returns the direction of the stiffener flange when the stiffener is located on a midship reference.

secondary2() - Method in interface nxopen.features.shipdesign.PlateSystemBuilder

Returns the direction of the stiffener flange.

secondary2OnReference() - Method in interface nxopen.features.shipdesign.PlateSystemBuilder

Returns the direction of the stiffener flange when the stiffener is located on a midship reference.

SECONDARY_EXTENSION - Static variable in class nxopen.annotations.LineComponent.LineType

secondary extension

SECONDARY_GEOMETRY - Static variable in class nxopen.drawings.DraftingComponentSelectionBuilder.Geometry

indicates the component objects are to be rendered with Secondary geometry color/font/width

SECONDARY_HIDDEN_NONSECTION - Static variable in class nxopen.drawings.ShipDraftingViewLinesViewStyle.Lines

Secondary, Hidden, NonSection

SECONDARY_HIDDEN_NONSECTION - Static variable in class nxopen.preferences.ShipDraftingViewLinesViewPreferences.Lines

Secondary, Hidden, NonSection

SECONDARY_HIDDEN_SECTION - Static variable in class nxopen.drawings.ShipDraftingViewLinesViewStyle.Lines

Secondary, Hidden, Section

SECONDARY_HIDDEN_SECTION - Static variable in class nxopen.preferences.ShipDraftingViewLinesViewPreferences.Lines

Secondary, Hidden, Section

SECONDARY_INDEXING_INLINE - Static variable in class nxopen.uf.UFDraw.SecondaryIndexingAlign

SECONDARY_INDEXING_SUBSCRIPT - Static variable in class nxopen.uf.UFDraw.SecondaryIndexingAlign

SECONDARY_PARTS - Static variable in class nxopen.weld.WeldBeadBuilder.BeadLocationMethod

on the secondary parts

SECONDARY_VISIBLE_NONSECTION - Static variable in class nxopen.drawings.ShipDraftingViewLinesViewStyle.Lines

Secondary, Visible, NonSection

SECONDARY_VISIBLE_NONSECTION - Static variable in class nxopen.preferences.ShipDraftingViewLinesViewPreferences.Lines

Secondary, Visible, NonSection

SECONDARY_VISIBLE_SECTION - Static variable in class nxopen.drawings.ShipDraftingViewLinesViewStyle.Lines

Secondary, Visible, Section

SECONDARY_VISIBLE_SECTION - Static variable in class nxopen.preferences.ShipDraftingViewLinesViewPreferences.Lines

Secondary, Visible, Section

secondaryAlignment() - Method in interface nxopen.drawings.ViewCommonViewLabelBuilder

Returns the secondary alignment
License requirements: None.

secondaryCalloutActive() - Method in interface nxopen.annotations.DimensionMeasurementBuilder

Returns the activation of hole callout secondary dimension
License requirements: None.

secondaryComponent() - Method in interface nxopen.drawings.DrawingsPropertiesBuilder

Returns the secondary geometry state.

secondaryComponents() - Method in interface nxopen.drawings.BaseViewBuilder

Returns the list of secondary objects in the view
License requirements: None.

secondaryComponents() - Method in interface nxopen.drawings.DetailViewBuilder

Returns the list of secondary components in the view
License requirements: None.

secondaryComponents() - Method in interface nxopen.drawings.ProjectedViewBuilder

Returns the list of secondary components in the view
License requirements: None.

secondaryComponents() - Method in interface nxopen.drawings.SectionViewBuilder

Returns the list of secondary objects in the view
License requirements: None.

secondaryComponents() - Method in interface nxopen.drawings.StandardViewsBuilder

Returns the list of secondary objects in the view
License requirements: None.

secondaryComponents() - Method in interface nxopen.drawings.ViewStyleBuilder

Returns the secondary components style builder of the view style builder which represents the secondary geometry tab on the View Style Dialog
License requirements: drafting ("DRAFTING")
.

secondaryComponentsCFW() - Method in interface nxopen.drawings.ViewStyleSecondaryComponentsBuilder

Returns the visible and hidden lines color, font, and width of secondary geometry.

secondaryCompoundDatumReference() - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder

Returns the secondary compound datum reference
License requirements: None.

secondaryContent() - Method in interface nxopen.drafting.DrawingCreationWizardBuilder

Returns the secondary content.

secondaryContentHiddenLineColor() - Method in interface nxopen.drafting.AutomationPreferencesBuilder

Returns the secondary content hidden line color
License requirements: None.

secondaryContentHiddenLineFont() - Method in interface nxopen.drafting.AutomationPreferencesBuilder

Returns the secondary content hidden line font
License requirements: None.

secondaryContentHiddenLineWidth() - Method in interface nxopen.drafting.AutomationPreferencesBuilder

Returns the secondary content hidden line width
License requirements: None.

secondaryContentVisibleLineColor() - Method in interface nxopen.drafting.AutomationPreferencesBuilder

Returns the secondary content visible line color
License requirements: None.

secondaryContentVisibleLineFont() - Method in interface nxopen.drafting.AutomationPreferencesBuilder

Returns the secondary content visible line font
License requirements: None.

secondaryContentVisibleLineWidth() - Method in interface nxopen.drafting.AutomationPreferencesBuilder

Returns the secondary content visible line width
License requirements: None.

secondaryDatumDualMCMType() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

Deprecated.

Deprecated in NX10.0.0. Use Annotations.SearchCriteriaFeatureControlFrameBuilder#datumMCMType and Annotations.SearchCriteriaFeatureControlFrameBuilder#setDatumMCMType instead.

secondaryDatumDualText() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

Deprecated.

Deprecated in NX10.0.0. Use Annotations.SearchCriteriaFeatureControlFrameBuilder#datumText and Annotations.SearchCriteriaFeatureControlFrameBuilder#setDatumText instead.

secondaryDatumExtendedText() - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder

Returns the secondary datum extended text.

secondaryDatumMCMType() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

Deprecated.

Deprecated in NX10.0.0. Use Annotations.SearchCriteriaFeatureControlFrameBuilder#datumMCMType and Annotations.SearchCriteriaFeatureControlFrameBuilder#setDatumMCMType instead.

secondaryDatumReference() - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder

Returns the secondary datum reference
License requirements: None.

secondaryDatumText() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

Deprecated.

Deprecated in NX10.0.0. Use Annotations.SearchCriteriaFeatureControlFrameBuilder#datumText and Annotations.SearchCriteriaFeatureControlFrameBuilder#setDatumText instead.

secondaryDirection() - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder

Returns the secondary direction
License requirements: None.

secondaryEdge() - Method in interface nxopen.weld.JointItemBuilder

Returns the secondary edge of a butt weld.

secondaryEdge() - Method in interface nxopen.weld.WeldJointBuilder

Returns the secondary edge of a butt weld.

secondaryEndOfTestCut() - Method in interface nxopen.cam.TurnRoughFinishTestCut

Returns the secondary end of test cut
License requirements: cam_base ("CAM BASE")
.

secondaryFace() - Method in interface nxopen.weld.JointItemBuilder

Returns the secondary face of a butt weld.

secondaryFace() - Method in interface nxopen.weld.WeldJointBuilder

Returns the secondary face of a butt weld.

secondaryFaceNormal - Variable in class nxopen.weld.WeldJointBuilder.JointMidPointData

The secondary body face normal in absolute coordinates at the joint mid point.

SecondaryGeometryInViewsBuilder - Interface in nxopen.drawings

This builder allows the user to select existing view(s) in which component objects can be designated as secondary or primary
To create a new instance of this class, use DraftingViewCollection.createSecondaryGeometryInViewsBuilder()
Default values.

secondaryHiddenByPrimaryCFW() - Method in interface nxopen.drawings.ViewStyleSecondaryComponentsBuilder

Returns the visible and hidden lines color, font, and width of secondary geometry that is hidden by primary geometry.

secondaryIndexing() - Method in interface nxopen.drawings.ViewCommonViewLabelBuilder

Returns the secondary indexing
License requirements: None.

secondaryIndexingAlign - Variable in class nxopen.uf.UFDraw.ViewLabelParms

secondaryLeadAngles() - Method in interface nxopen.cam.ToolAxisAdvanced

Returns the secondary lead angles, used for trailing to leading
License requirements: None.

secondaryMeasuringStop() - Method in interface nxopen.cam.TurnRoughFinishTestCut

Returns the secondary measuring stop
License requirements: cam_base ("CAM BASE")
.

secondaryNumber() - Method in interface nxopen.drawings.DrawingSheetBuilder

Returns the secondary number of the drawing sheet to be created or edited
License requirements: None.

secondaryNumberDelimiter() - Method in interface nxopen.drawings.DrawingFormatSheetBuilder

Returns the secondary number delimiter
License requirements: None.

secondaryNumberString() - Method in interface nxopen.linedesigner.InsertSheetBuilder

Returns the secondary number string
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

secondaryObject() - Method in interface nxopen.SketchMakeSymmetricBuilder

Returns the function returns the secondary object of a symmetric constraint.

secondaryOffsetGeometry() - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder

Returns the secondary offset geometry
License requirements: None.

secondaryRoughnessText() - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder

Returns the secondary roughness text
License requirements: None.

secondaryRoughnessType() - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder

Returns the secondary roughness enum
License requirements: None.

SecondarySectionData - Interface in nxopen.geometricutilities

Represents a SecondarySectionData
Created in NX5.0.0

secondarySelection() - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder

Returns the secondary selection
License requirements: None.

secondarySequence() - Method in interface nxopen.cam.TurnRoughFinishTestCut

Returns the secondary test cut sequence
License requirements: None.

secondaryStandardAngle() - Method in interface nxopen.formboard.FormboardLayoutBuilder

Returns the secondary standard angle.

secondaryStartOfTestCut() - Method in interface nxopen.cam.TurnRoughFinishTestCut

Returns the secondary start of test cut
License requirements: cam_base ("CAM BASE")
.

secondaryState() - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder

Returns the secondary state
License requirements: None.

secondaryTestCut() - Method in interface nxopen.cam.TurnCutParameters

Returns the Secondary Test Cut
License requirements: None.

secondaryThicknessUser() - Method in interface nxopen.weld.EdgePrepValuesBuilder

Returns the user defined value for secondary thickness
License requirements: None.

secondaryType() - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder

Returns the secondary feature type
License requirements: None.

secondaryVector() - Method in interface nxopen.cae.LaminateDrapingDataBuilder

Returns the specify
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

secondaryVectorChoice() - Method in interface nxopen.cae.LaminateDrapingDataBuilder

Returns the secondary alignment
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

secondAssociativities() - Method in interface nxopen.annotations.BaseOrdinateDimensionBuilder

Returns the second associativities
License requirements: None.

secondAssociativity() - Method in interface nxopen.annotations.BaseAngularDimensionBuilder

Returns the second associativity
License requirements: None.

secondAssociativity() - Method in interface nxopen.annotations.BaseChamferDimensionBuilder

Returns the second associativity
License requirements: None.

secondAssociativity() - Method in interface nxopen.annotations.BaseLinearDimensionBuilder

Returns the second associativity.

secondAssociativity() - Method in interface nxopen.annotations.BaseRapidDimensionBuilder

Returns the second associativity
License requirements: None.

secondAssociativity() - Method in interface nxopen.annotations.BaseThicknessDimensionBuilder

Returns the second associativity
License requirements: None.

secondBendRadius() - Method in interface nxopen.features.sheetmetal.HemFlangeBuilder

Returns the second bend radius
License requirements: nx_sheet_metal ("NX Sheet Metal")
.

secondBody() - Method in interface nxopen.geometricanalysis.SimpleInterference

Returns the Second Body
License requirements: None.

secondBody() - Method in interface nxopen.mechatronics.ChangeMaterialBuilder

Returns the second body of collision pair.

secondBody() - Method in interface nxopen.mechatronics.PreventCollisionBuilder

Returns the second object.

secondBoundingObject() - Method in interface nxopen.features.TrimCurveBuilder

Returns the objects for the second boundary against which the selected curves are to be trimmed.

secondBoundingObjectEndOption() - Method in interface nxopen.features.TrimCurveBuilder

Returns the end of the second bounding object which would be trimmed
License requirements: None.

secondBoundingObjectOption() - Method in interface nxopen.features.TrimCurveBuilder

Returns the second bounding object option
License requirements: None.

secondBoundingObjectPickPoint() - Method in interface nxopen.features.TrimCurveBuilder

Returns the pick point for the second bounding object
License requirements: None.

secondBoundingPlane() - Method in interface nxopen.features.TrimCurveBuilder

Returns the first bounding object plane
License requirements: None.

secondChainInstallDirection() - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder

Returns the flag to indicate whether to flip the direction of the second selected chain object or not.

secondChainObject() - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder

Returns the second chain selected object.

secondChannel() - Method in interface nxopen.tooling.CoolingConnectBuilder

Returns the second channel to be connected.

secondClearance() - Method in interface nxopen.tooling.SpecialFormingBuilder

Returns the second clearance
License requirements: None.

secondCompartment() - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder

Returns the second compartment option.

secondConstraintCurveCollector() - Method in interface nxopen.geometricutilities.ConicCrossSection

Returns the second constraint curve collector
License requirements: None.

secondContactCurve() - Method in interface nxopen.motion.CurveContactBuilder

Returns the selection of the second contact curve
License requirements: None.

secondContactGeometry() - Method in interface nxopen.motion.BodyContactBuilder

Returns the selection of the second contact geometry
License requirements: None.

secondConveyingSurfaceCorner() - Method in interface nxopen.linedesigner.SingleElementConveyorBuilder

Returns the second corner point
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

secondCorner() - Method in interface nxopen.drawings.StandardViewsBuilder

Deprecated.

Deprecated in NX6.0.2. Use the second corner of the multiple view placemnent builder instead

secondCornerEdges - Variable in class nxopen.uf.UFModl.SmreliefData

secondCornerFilletRadius - Variable in class nxopen.uf.UFModl.SmreliefData

secondCsys() - Method in interface nxopen.motion.JointDefine

Returns the csys of second link
License requirements: mechanisms ("MECHANISMS")
.

secondCurve() - Method in interface nxopen.cam.TeachmodeLinearMoveBuilder

Returns the Second Curve
License requirements: None.

secondCurve() - Method in interface nxopen.features.CircularBlendCurveBuilder

Returns the second curve chain
License requirements: None.

secondCurve() - Method in interface nxopen.features.GeodesicChamferBuilder

Returns the second selected curve in the section
License requirements: None.

secondCurve() - Method in interface nxopen.features.GeodesicFilletBuilder

Returns the second selected curve in the section
License requirements: None.

secondCurve() - Method in interface nxopen.geometricanalysis.DeviationChecking

Returns the second curve or edge - required for the deviation checking when DeviationChecking.type() and DeviationChecking.setType(nxopen.geometricanalysis.DeviationChecking.Types) is set to DeviationChecking.Types.CURVE_TO_CURVE .

secondCurveMaximumPenetration() - Method in interface nxopen.motion.CurveContactRecurdyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using CurveContactRecurdyn.secondCurveMaximumPenetrationExpression() to query or edit it.

secondCurveMaximumPenetrationExpression() - Method in interface nxopen.motion.CurveContactRecurdyn

Returns the second curve maximum penetration expression
License requirements: None.

secondCurveStock() - Method in interface nxopen.cam.TeachmodeLinearMoveBuilder

Returns the Stock on second Curve
License requirements: None.

secondCurveTag - Variable in class nxopen.uf.UFCurve.AskCombineCurvesData

secondCurveToolPosition() - Method in interface nxopen.cam.TeachmodeLinearMoveBuilder

Returns the Tool Position to second Curve
License requirements: None.

secondCut() - Method in interface nxopen.cam.DmStreamlineCutStep

Returns the second cut which defines point number for the second cut
License requirements: None.

secondDefinitionPoint() - Method in interface nxopen.annotations.Associativity

Returns the second definition point.

secondDir - Variable in class nxopen.uf.UFCurve.AskCombineCurvesData

secondDirection() - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder

Returns the second direction used in creating parting surface that requires two directions.

secondDirection - Variable in class nxopen.uf.UFSubdiv.Isocline

secondDistance() - Method in interface nxopen.facet.ExtrudeProfileBuilder

Returns the second distance to extrude
License requirements: None.

secondDistance() - Method in interface nxopen.features.sheetmetal.FlangeBuilder

Returns a distance based on FlangeBuilder.widthType() .

secondDriverJointLowerLimit() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

Returns the lower limit value for the second joint of the suspension template.

secondDriverJointSteps() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

Returns the step number for the second joint of the suspension template.

secondDriverJointUpperLimit() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

Returns the upper limit value for the second joint of the suspension template.

secondEdge() - Method in interface nxopen.geometricanalysis.DeviationChecking

Returns the second edge - required for the deviation checking when DeviationChecking.type() and DeviationChecking.setType(nxopen.geometricanalysis.DeviationChecking.Types) is set to DeviationChecking.Types.EDGE_TO_EDGE .

secondEdge() - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder

Returns the second edges or faces.

secondEdgeContinuity() - Method in interface nxopen.features.BridgeSurfaceBuilder

Returns the second edge continuity
License requirements: None.

secondEdgeOffset() - Method in interface nxopen.features.BridgeSurfaceBuilder

Returns the second edge offset
License requirements: None.

secondEdgeRange() - Method in interface nxopen.features.BridgeSurfaceBuilder

Returns the second edge range
License requirements: None.

secondEdgeSelection() - Method in interface nxopen.features.BridgeSurfaceBuilder

Returns the second edge selection
License requirements: None.

secondEndPoint() - Method in interface nxopen.formboard.PathLengthAnnotationBuilder

Returns the second end point
License requirements: routing_harness ("Routing Harness")
.

secondExtensionLineCfw - Variable in class nxopen.uf.UFDrf.LineArrowPreferences

secondExtensionLineColor() - Method in interface nxopen.annotations.LineArrowStyleBuilder

Returns the second extension line color
License requirements: None.

secondExtensionLineFont() - Method in interface nxopen.annotations.LineArrowStyleBuilder

Returns the second extension line font
License requirements: None.

secondExtensionLineWidth() - Method in interface nxopen.annotations.LineArrowStyleBuilder

Returns the second extension line width
License requirements: None.

secondFace() - Method in interface nxopen.features.IntersectionCurveBuilder

Returns the second face
License requirements: None.

secondFace - Variable in class nxopen.features.sheetmetal.ClosedCornerBuilder.FacePairData

Second face of the face pair

secondface - Variable in class nxopen.features.sheetmetal.EditCornerBuilder.FacePairData

Second face of the face pair

secondFace - Variable in class nxopen.features.sheetmetal.ThreeBendCornerBuilder.FacePairData

Second face of the face pair

secondFace() - Method in interface nxopen.geometricanalysis.DeviationChecking

Returns the second face - required for the deviation checking when DeviationChecking.type() and DeviationChecking.setType(nxopen.geometricanalysis.DeviationChecking.Types) is set to DeviationChecking.Types.FACE_TO_FACE or the face - required for the deviation checking when DeviationChecking.type() and DeviationChecking.setType(nxopen.geometricanalysis.DeviationChecking.Types) is set to DeviationChecking.Types.CURVE_TO_FACE or DeviationChecking.Types.EDGE_TO_FACE .

secondFaceCollector() - Method in interface nxopen.features.FaceBlendBuilder

Returns the second face collector
License requirements: None.

secondFaceSet() - Method in interface nxopen.geometricanalysis.SurfaceIntersectionBuilder

Returns the second selected face set
License requirements: None.

secondFaceset() - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. Use WeldGrooveBuilder.faceSet2() instead.

secondFacesetBottomEdges() - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. Use WeldGrooveBuilder.edgeSet2() instead.

secondFacesetHelpPoint() - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. Use WeldGrooveBuilder.seedPoint2() and WeldGrooveBuilder.setSeedPoint2(nxopen.Point3d) instead.

secondFacesetTopEdges() - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. Use WeldGrooveBuilder.edgeSet2() instead.

secondFlangeLength() - Method in interface nxopen.features.sheetmetal.HemFlangeBuilder

Returns the second flange length
License requirements: nx_sheet_metal ("NX Sheet Metal")
.

secondGeometry() - Method in interface nxopen.SketchDimensionBuilder

Returns the second geometry.

secondGeometryBoundingBufferLength() - Method in interface nxopen.motion.BodyContactRecurdyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using BodyContactRecurdyn.secondGeometryBoundingBufferLengthExpression() to query or edit it.

secondGeometryBoundingBufferLengthExpression() - Method in interface nxopen.motion.BodyContactRecurdyn

Returns the bounding Buffer Length expression
License requirements: None.

secondGeometryMaterialDirection() - Method in interface nxopen.motion.CurveContactBuilder

Returns the second geometry materia side direction
License requirements: None.

secondGeometryMaxFacetSizeFactor() - Method in interface nxopen.motion.BodyContactRecurdyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using BodyContactRecurdyn.secondGeometryMaxFacetSizeFactorExpression() to query or edit it.

secondGeometryMaxFacetSizeFactorExpression() - Method in interface nxopen.motion.BodyContactRecurdyn

Returns the max Facet Size Factor expression
License requirements: None.

secondGeometryMaxFacetSizeFactorFlag() - Method in interface nxopen.motion.BodyContactRecurdyn

Returns the max Facet Size Factor Flag
License requirements: None.

secondGeometryMaximumPenetration() - Method in interface nxopen.motion.BodyContactRecurdyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using BodyContactRecurdyn.secondGeometryMaximumPenetration() to query or edit it.

secondGeometryMaximumPenetrationExpression() - Method in interface nxopen.motion.BodyContactRecurdyn

Returns the Plane Maximum Penetration of the second geometry expression
License requirements: None.

secondGeometryPlaneToleranceFactor() - Method in interface nxopen.motion.BodyContactRecurdyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using BodyContactRecurdyn.secondGeometryPlaneToleranceFactorExpression() to query or edit it.

secondGeometryPlaneToleranceFactorExpression() - Method in interface nxopen.motion.BodyContactRecurdyn

Returns the Plane Tolerance Factor of the second geometry expression
License requirements: None.

secondGeometryPlaneToleranceFactorSolidContact() - Method in interface nxopen.motion.BodyContactRecurdyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using BodyContactRecurdyn.secondGeometryPlaneToleranceFactorSolidContactExpression() to query or edit it.

secondGeometryPlaneToleranceFactorSolidContactExpression() - Method in interface nxopen.motion.BodyContactRecurdyn

Returns the Plane Tolerance Factor of the second geometry for solid contact expression
License requirements: None.

secondGuide() - Method in interface nxopen.features.StyledSweepBuilder

Returns the second guide
License requirements: None.

secondIntersectionPoints() - Method in interface nxopen.features.shipdesign.ProfileSystemBuilder

Returns the selected intersection points between the curves and the second boundary.

secondJogAngle() - Method in interface nxopen.annotations.LineArrowStyleBuilder

Returns the second jog angle, between the jog and the extension line, in degrees.

secondJogDisplay() - Method in interface nxopen.annotations.LineArrowStyleBuilder

Returns the second jog's display flag, if true, the second jog will be displayed, false otherwise
License requirements: None.

secondJogEndOffset() - Method in interface nxopen.annotations.LineArrowStyleBuilder

Returns the second jog end offset from the dimension line
License requirements: None.

secondJogOrientation() - Method in interface nxopen.annotations.LineArrowStyleBuilder

Returns the second jog orientation, can be either IN or OUT
License requirements: None.

secondJogStartOffset() - Method in interface nxopen.annotations.LineArrowStyleBuilder

Returns the second jog start offset from the dimension line
License requirements: None.

secondJoint() - Method in interface nxopen.motion.CouplerBuilder

Returns the second joint
License requirements: None.

secondJoint() - Method in interface nxopen.motion.GeneralCouplerBuilder

Returns the selected second joint
License requirements: None.

secondLawControl() - Method in interface nxopen.geometricutilities.ConicCrossSection

Returns the Second Offset Law builder
License requirements: None.

secondLeg() - Method in interface nxopen.weld.FilletBuilder

Returns the linear dimension second leg.

secondLength() - Method in interface nxopen.tooling.DieBaseBuilder

Returns the second section length.

secondLine - Variable in class nxopen.uf.UFModl.DimensionData

secondLinearDistance() - Method in interface nxopen.cam.ToolPathEditorBuilder

Returns the second linear distance
License requirements: None.

secondLink() - Method in interface nxopen.motion.JointDefine

Returns the second link
License requirements: mechanisms ("MECHANISMS")
.

secondLocation() - Method in interface nxopen.geometricutilities.StyledSweepDoubleOnPathDimBuilder

Returns the second location
License requirements: None.

secondMargin() - Method in interface nxopen.tooling.AutoDimensionBuilder

Returns the second margin tag
License requirements: None.

secondMatrix() - Method in interface nxopen.motion.JointDefine

Returns the matrix of second link
License requirements: mechanisms ("MECHANISMS")
.

secondObject() - Method in interface nxopen.annotations.Associativity

Returns the second associativity object, if the annotation is associated to an intersection point.

secondObject() - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder

Returns the second selected object.

secondObjectFilter() - Method in interface nxopen.cam.CollisionPairBuilder

Returns the second collision selection filter
License requirements: None.

secondObjectName() - Method in interface nxopen.cam.CollisionPairBuilder

Returns the second collision selection name
License requirements: None.

secondOffset() - Method in interface nxopen.features.ChamferBuilder

Returns the second offset distance (expression).

secondOffset() - Method in interface nxopen.features.SweepAlongGuideBuilder

Returns the second offset
License requirements: None.

secondOffset() - Method in interface nxopen.features.ThickenBuilder

Returns the second offset.

secondOffset() - Method in interface nxopen.geometricutilities.ConicCrossSection

Returns the second offset for the conic section with face blend
License requirements: None.

secondOffset() - Method in interface nxopen.routing.CrossSection

Returns the offset expression applied to the profile when generating a Sweep.

secondOffset - Variable in class nxopen.uf.UFModl.AskThickenSheetParmsData

secondOffsetExp() - Method in interface nxopen.features.ChamferBuilder

Returns the second offset expression object of chamfer.

secondOffsetOption() - Method in interface nxopen.geometricutilities.ConicCrossSection

Returns the second offset option for the conic section with face blend
License requirements: None.

secondOrientationType() - Method in interface nxopen.motion.JointDefine

Returns the second orientation type of joint
License requirements: mechanisms ("MECHANISMS")
.

secondOrigin() - Method in interface nxopen.motion.JointDefine

Returns the origin of second link
License requirements: mechanisms ("MECHANISMS")
.

secondPanelFaces() - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder

Returns the Second Panel face selection
License requirements: solid_modeling ("SOLIDS MODELING")
.

secondPanelInnerContactCurves() - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder

Returns the Second Panel inner contact section
License requirements: solid_modeling ("SOLIDS MODELING")
.

secondPanelOuterContactCurves() - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder

Returns the Second Panel outer contact section
License requirements: solid_modeling ("SOLIDS MODELING")
.

secondPanelType() - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder

Returns the Second Panel type
License requirements: solid_modeling ("SOLIDS MODELING")
.

secondPenetrationDepth() - Method in interface nxopen.weld.WeldGrooveBuilder

Returns the second penetration depth
License requirements: ugweld ("UG WELD")
.

secondPlane() - Method in interface nxopen.features.IntersectionCurveBuilder

Returns the second plane
License requirements: None.

secondPlane() - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder

Returns the second selected plane.

secondPlane() - Method in interface nxopen.routing.FittingOverstockBuilder

Returns the second trimming plane
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

secondPoint(Point3d, View) - Method in interface nxopen.display.NonProportionalZoom

Scales the specified view non-proportionally in the horizontal (X) and vertical (Y) dimensions, based on a mouse gesture defined by two points in a view.

secondPoint() - Method in interface nxopen.features.GeodesicChamferBuilder

Returns the second selection point
License requirements: None.

secondPoint() - Method in interface nxopen.features.GeodesicFilletBuilder

Returns the second selection point
License requirements: None.

secondPoint - Variable in class nxopen.uf.UFModl.DimensionData

secondPosToExtensionLineDistance() - Method in interface nxopen.annotations.LineArrowStyleBuilder

Returns the distance from the position on the object being dimensioned to the end of the second extension line
License requirements: None.

secondPosToExtensionLineDistance - Variable in class nxopen.uf.UFDrf.LineArrowPreferences

secondPosToExtLineDist() - Method in interface nxopen.annotations.LineAndArrowPreferences

Returns the second position to extension line distance
License requirements: None.

secondPrincipleMi() - Method in interface nxopen.features.SectionInertiaAnalysisBuilder

Returns the second principle mi
License requirements: None.

secondPtSelect() - Method in interface nxopen.cae.FaceFromBoundaryBuilder

Returns the second pt to join the ends of open edges in the loop.

secondRadius() - Method in interface nxopen.cam.TurnEngageRetractBuilder

Returns the Second Radius
License requirements: None.

secondReferenceIntersection() - Method in interface nxopen.features.TrimCurveBuilder

Returns the second user defined intersection point.

secondRegionLimitCurve() - Method in interface nxopen.features.GlobalShapingBuilder

Returns the second region limit curve
License requirements: None.

secondRegionLimitCurveOffsetLaw() - Method in interface nxopen.features.GlobalShapingBuilder

Returns the second region limit curve offset law
License requirements: None.

secondRegionOffsetCurve() - Method in interface nxopen.features.GlobalShapingBuilder

Returns the second region offset curve
License requirements: None.

secondRun() - Method in interface nxopen.routing.IntegrateRunsBuilder

Returns the second run
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

SECONDS - Static variable in class nxopen.cam.Cycle.DwellType

dwell seconds

SECONDS - Static variable in class nxopen.cam.CycleDwell.Mode

dwell seconds

SECONDS - Static variable in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.DwellUnitTypes

Seconds

secondsBetweenSteps() - Method in interface nxopen.features.FeatureReplayBuilder

Returns the delay in seconds between replay steps
License requirements: solid_modeling ("SOLIDS MODELING")
.

secondScale() - Method in interface nxopen.motion.GeneralCouplerBuilder

Deprecated.

Deprecated in NX8.5.0. Obtion the exression using GeneralCouplerBuilder.secondScaleExpression() to query or edit it.

secondScaleExpression() - Method in interface nxopen.motion.GeneralCouplerBuilder

Returns the second scale expression
License requirements: None.

secondScrap() - Method in interface nxopen.tooling.ScrapDesignBuilder

Returns the second scrap to merge with the first one
License requirements: None.

secondSection() - Method in interface nxopen.features.GeodesicChamferBuilder

Returns the second section of curves to chamfer
License requirements: None.

secondSection() - Method in interface nxopen.features.GeodesicFilletBuilder

Returns the second section of curves to fillet
License requirements: None.

secondSection() - Method in interface nxopen.features.RuledBuilder

Returns the second section
License requirements: features_modeling ("FEATURES MODELING") OR nx_freeform_1 ("basic freeform modeling")
.

secondSegment() - Method in interface nxopen.routing.DiscontinuityCorner

Returns the second segment of a discontinuity corner, segment must be attached to the Routing.ControlPoint that defines this corner.

secondSelectElement() - Method in interface nxopen.cae.CfdContactPreventionConstraintBuilder

Returns the second element selection
License requirements: None.

secondSelection() - Method in interface nxopen.cae.CfdContactPreventionConstraintBuilder

Returns the second selection
License requirements: None.

secondSet() - Method in interface nxopen.features.IntersectionCurveBuilder

Returns the second set required only for non-associative intersection curve
License requirements: None.

secondSheetId - Variable in class nxopen.uf.UFModlFeatures.IsodivideFaceData

secondTargetCurve() - Method in interface nxopen.features.GlobalShapingBuilder

Returns the second target curve
License requirements: None.

secondTargetCurveOffset() - Method in interface nxopen.features.GlobalShapingBuilder

Returns the second target curve offset
License requirements: None.

secondType() - Method in interface nxopen.motion.GeneralCouplerBuilder

Returns the second joint movement type
License requirements: None.

secondVector() - Method in interface nxopen.annotations.BaseAngularDimensionBuilder

Returns the second vector
License requirements: None.

secondVector() - Method in interface nxopen.motion.JointDefine

Returns the direction of second link
License requirements: mechanisms ("MECHANISMS")
.

secondVectorView() - Method in interface nxopen.annotations.BaseAngularDimensionBuilder

Returns the second vector view
License requirements: None.

secPlanes - Variable in class nxopen.uf.UFProcessAid.AskSectionOfDatumData

SECSRF_CONSTANT - Static variable in class nxopen.uf.UFModl.SecsrfParamMethod

SECSRF_CUBIC - Static variable in class nxopen.uf.UFModl.SecsrfParamMethod

SECSRF_ENDS_APEX_HILITE - Static variable in class nxopen.uf.UFModl.SecsrfCreMethod

SECSRF_ENDS_APEX_RHO - Static variable in class nxopen.uf.UFModl.SecsrfCreMethod

SECSRF_ENDS_APEX_SHOULDER - Static variable in class nxopen.uf.UFModl.SecsrfCreMethod

SECSRF_ENDS_SLOPE_ARC - Static variable in class nxopen.uf.UFModl.SecsrfCreMethod

SECSRF_ENDS_SLOPES_CUBIC - Static variable in class nxopen.uf.UFModl.SecsrfCreMethod

SECSRF_ENDS_SLOPES_HILITE - Static variable in class nxopen.uf.UFModl.SecsrfCreMethod

SECSRF_ENDS_SLOPES_RHO - Static variable in class nxopen.uf.UFModl.SecsrfCreMethod

SECSRF_ENDS_SLOPES_SHOULDER - Static variable in class nxopen.uf.UFModl.SecsrfCreMethod

SECSRF_FILLET_CUBIC - Static variable in class nxopen.uf.UFModl.SecsrfCreMethod

SECSRF_FILLET_HILITE - Static variable in class nxopen.uf.UFModl.SecsrfCreMethod

SECSRF_FILLET_RHO - Static variable in class nxopen.uf.UFModl.SecsrfCreMethod

SECSRF_FILLET_SHOULDER - Static variable in class nxopen.uf.UFModl.SecsrfCreMethod

SECSRF_FIVE_POINTS - Static variable in class nxopen.uf.UFModl.SecsrfCreMethod

SECSRF_FOUR_POINTS_SLOPE - Static variable in class nxopen.uf.UFModl.SecsrfCreMethod

SECSRF_FULL_CIRCLE - Static variable in class nxopen.uf.UFModl.SecsrfCreMethod

SECSRF_GENERAL - Static variable in class nxopen.uf.UFModl.SecsrfParamMethod

SECSRF_INIT_CREATE_METHOD - Static variable in class nxopen.uf.UFModl.SecsrfCreMethod

SECSRF_LINEAR - Static variable in class nxopen.uf.UFModl.SecsrfParamMethod

SECSRF_NO_DATA - Static variable in class nxopen.uf.UFModl.SecsrfParamMethod

SECSRF_NOT_USED1 - Static variable in class nxopen.uf.UFModl.SecsrfCreMethod

SECSRF_NOT_USED2 - Static variable in class nxopen.uf.UFModl.SecsrfCreMethod

SECSRF_POINT_RADIUS_ANGLE_ARC - Static variable in class nxopen.uf.UFModl.SecsrfCreMethod

SECSRF_TENSION - Static variable in class nxopen.uf.UFModl.SecsrfParamMethod

SECSRF_THREE_POINTS_ARC - Static variable in class nxopen.uf.UFModl.SecsrfCreMethod

SECSRF_TWO_POINTS_RADIUS - Static variable in class nxopen.uf.UFModl.SecsrfCreMethod

sectCriteria() - Method in interface nxopen.cae.CyclicSymmetricParameters

Returns the sector criteria enum
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

section - Variable in class nxopen.cae.Result.ResultParameters

Deprecated.

section - Variable in class nxopen.cae.Result.Type

section - Variable in class nxopen.cae.ResultParameters.AskSectionPlyLayerData

section() - Method in interface nxopen.die.AddendumSectionUserDefinedBuilder

Returns the objects defining the section, either a previously defined section or a string of objects defining the section shape.

SECTION - Static variable in class nxopen.die.ClearanceBuilder.ClearanceGeometryTypes

The input is closed profiles.

section() - Method in interface nxopen.die.ClearanceBuilder

Returns the closed profile sections to use for the basis of the clearance area.

section() - Method in interface nxopen.die.DrawDiePunchBuilder

Returns the section builder of the draw die punch.

section() - Method in interface nxopen.die.FingerClearanceNotchBuilder

Returns the open section constructed from curves, edges, or a sketch.

SECTION - Static variable in class nxopen.die.FingerClearanceNotchBuilder.Types

Build from an open section profile.

SECTION - Static variable in class nxopen.die.OutputCurvesBuilder.TrimCurveCreateTypes

Section.

section() - Method in interface nxopen.die.RotorBuilder

Returns the section builder of the rotor.

section() - Method in interface nxopen.die.SteelInsertBuilder

Returns the section builder of the diesteelinsert
License requirements: ug_die_design ("Die Design")
.

SECTION - Static variable in class nxopen.Direction.OnFaceOption

Creates direction in a sectional direction to face.

SECTION - Static variable in class nxopen.display.DynamicSectionTypes.Clip

One sided clip

section() - Method in interface nxopen.drawings.ViewStyle

Returns object for doing View style settings applicable to Section .

section() - Method in interface nxopen.ExpressionSectionSet

Returns the section
License requirements: None.

section() - Method in interface nxopen.features.AeroFlangeBuilder

Returns the section
License requirements: None.

section() - Method in interface nxopen.features.AeroRibBuilder

Returns the section
License requirements: None.

SECTION - Static variable in class nxopen.features.BridgeCurveBuilderEx.EndObjectTypes

Section

SECTION - Static variable in class nxopen.features.BridgeCurveBuilderEx.StartObjectTypes

Section

section() - Method in interface nxopen.features.CompositeCurveBuilder

Returns the section
License requirements: None.

section() - Method in interface nxopen.features.CurveLengthBuilder

Returns the section
License requirements: solid_modeling ("SOLIDS MODELING")
.

section() - Method in interface nxopen.features.DatumAxisBuilder

Returns the section.

section() - Method in interface nxopen.features.DeleteCurveBuilder

Returns the section
License requirements: None.

SECTION - Static variable in class nxopen.features.EmbossLimit.EndcapSourceOption

Indicates the geometry is the sketch plane on which the section resides.

section() - Method in interface nxopen.features.EmbossRegion

Returns the section that is composed of chains
License requirements: None.

section() - Method in interface nxopen.features.ExtrudeBuilder

Returns the section
License requirements: None.

SECTION - Static variable in class nxopen.features.GeometricConstraintData.ParameterDirection

General section if point is attached to face

section() - Method in interface nxopen.features.JoinCurvesBuilder

Returns the section that collects the input curves that are to be joined.

SECTION - Static variable in class nxopen.features.MatchedReferenceBuilder.Types

section

section() - Method in interface nxopen.features.ResizeChamferCurveBuilder

Returns the selected section
License requirements: None.

section() - Method in interface nxopen.features.RevolveBuilder

Returns the section
License requirements: None.

section() - Method in interface nxopen.features.RibBuilder

Returns the input section
License requirements: None.

section() - Method in interface nxopen.features.sheetmetal.BeadBuilder

Returns the Section used by the bead. section should be open.

section() - Method in interface nxopen.features.sheetmetal.BendBuilder

Returns the Section
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

section() - Method in interface nxopen.features.sheetmetal.ContourFlangeBuilder

Returns the section of contour flange
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

section() - Method in interface nxopen.features.sheetmetal.DimpleBuilder

Returns the Section used by the Dimple.

section() - Method in interface nxopen.features.sheetmetal.DrawnCutoutBuilder

Returns the Section used by the Drawn Cutout.

section() - Method in interface nxopen.features.sheetmetal.EdgeRipBuilder

Returns the section used by Edge Rip
License requirements: nx_sheet_metal ("NX Sheet Metal")
.

section() - Method in interface nxopen.features.sheetmetal.GussetBuilder

Returns the section
This section object contains a planar set of connected curves that will be used to create a Gusset of type nxopen.features.SheetMetal.GussetBuilder.Types#USER_DEFINED_PROFILE .

section() - Method in interface nxopen.features.sheetmetal.JogBuilder

Returns
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

section() - Method in interface nxopen.features.sheetmetal.LouverBuilder

Returns the section used by the louver.

section() - Method in interface nxopen.features.sheetmetal.NormalCutoutBuilder

Returns the section used by the normal cutout.

section() - Method in interface nxopen.features.sheetmetal.TabBuilder

Returns the section of tab
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

SECTION - Static variable in class nxopen.features.shipdesign.SelectPartBuilder.Types

SECTION - Static variable in class nxopen.features.shipdesign.TransitionBuilder.TransitionTypes

SECTION - Static variable in class nxopen.features.StyledSweepBuilder.FixedStringOptions

Section

section() - Method in interface nxopen.features.SweepAlongGuideBuilder

Returns the section
License requirements: None.

section() - Method in interface nxopen.features.VarsweepBuilder

Returns the master section.

SECTION - Static variable in class nxopen.geometricutilities.AlongPathPattern.YDirectionOptions

y direction is a section.

section() - Method in interface nxopen.geometricutilities.SpineDefinitionBuilder

Returns the section
License requirements: None.

SECTION - Static variable in class nxopen.layout2d.CreateComponentFrom3DBuilder.CreateMethod

use section

SECTION - Static variable in class nxopen.Offset.OnFaceOption

Creates offset representing curvature in a sectional direction on face.

section() - Method in interface nxopen.preferences.ViewPreferences

Returns object for doing View Preferences settings applicable to Section .

Section - Interface in nxopen

Represents a section
Section consists of "chained_entity", a chain or a single entity of edge or curve.

section() - Method in interface nxopen.SketchAlongPathBuilder

Returns the path
License requirements: None.

section() - Method in interface nxopen.SketchEvaluator

Returns the master section.

section() - Method in interface nxopen.SketchMirrorPatternBuilder

Returns the pattern section
License requirements: None.

section() - Method in interface nxopen.SketchPatternBuilder

Returns the pattern section
License requirements: None.

section() - Method in interface nxopen.SketchProjectBuilder

Returns the section.

Section.AllowTypes - Class in nxopen

Defines entity types allowed.

Section.DeselectOption - Class in nxopen

Defines type of deselect option.

Section.Mode - Class in nxopen

Defines mode with respect to feature create or edit mode.

Section.StartAndDirectionData - Class in nxopen

This class holds the data returned from Section.getStartAndDirection()

Section.StartAndDirectionOfLoopData - Class in nxopen

This class holds the data returned from Section.getStartAndDirectionOfLoop(int)

section1() - Method in interface nxopen.weld.JointmarkGuideBuilder

Returns the first section used in Centerline.

section2() - Method in interface nxopen.weld.JointmarkGuideBuilder

Returns the second section used in Centerline.

section3() - Method in interface nxopen.weld.JointmarkGuideBuilder

Returns the third section used in Offset from Edge.

section4() - Method in interface nxopen.weld.JointmarkGuideBuilder

Returns the fourth section used in Existing Curve.

SECTION_AREA - Static variable in class nxopen.IgesCreator.CrossHatchMapEnum

map cross hatch as section area

SECTION_BETWEEN_INTERSECTION - Static variable in class nxopen.Section.DeselectOption

Potion of the loop between intersections will be deselected this may contain multiple chains

SECTION_CURVES - Static variable in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder.OutputType

section curves

SECTION_CURVES - Static variable in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder.OutputType

section curves

SECTION_EDGE - Static variable in class nxopen.drawings.DraftingCurveInfo.DraftingCurveType

Specifies Section Edge Curve

SECTION_EDGE_TYPE - Static variable in class nxopen.uf.UFDraw.DraftingCurveType

SECTION_EXISTING - Static variable in class nxopen.drawings.ViewOrientationBuilder.Orientation

Section an Existing View

SECTION_INFO - Static variable in class nxopen.uf.UFSf.ScenarioInfo

SECTION_NORMAL_SIDE - Static variable in class nxopen.features.sheetmetal.BeadBuilder.HeightSideOptions

Material removed on the side of the section normal.

SECTION_NORMAL_SIDE - Static variable in class nxopen.features.sheetmetal.BendBuilder.BendDirectionOptions

Bend is created on the side of the section normal.

SECTION_NORMAL_SIDE - Static variable in class nxopen.features.sheetmetal.ContourFlangeBuilder.SweepSideOptions

SECTION_NORMAL_SIDE - Static variable in class nxopen.features.sheetmetal.DimpleBuilder.DepthTypeOptions

Dimple punched on the side of the section normal.

SECTION_NORMAL_SIDE - Static variable in class nxopen.features.sheetmetal.DrawnCutoutBuilder.DepthTypeOptions

Drawn Cutout punched on the side of the section normal.

SECTION_NORMAL_SIDE - Static variable in class nxopen.features.sheetmetal.JogBuilder.DirectionTypeOptions

jog created on the side of the section normal.

SECTION_NORMAL_SIDE - Static variable in class nxopen.features.sheetmetal.LouverBuilder.DepthSideOptions

Material added on the side of the section normal.

SECTION_NORMAL_SIDE - Static variable in class nxopen.features.sheetmetal.NormalCutoutBuilder.DepthSideOptions

Material removed on the side of the section normal.

SECTION_NORMAL_SIDE - Static variable in class nxopen.features.sheetmetal.TabBuilder.ThicknessSideOptions

Material created on the side of the section normal.

SECTION_OFFSET - Static variable in class nxopen.cae.PropertyTable.PropertyType

SECTION_ORIENTATION - Static variable in class nxopen.cae.PropertyTable.PropertyType

SECTION_PLANE - Static variable in class nxopen.features.TextBuilder.OnFacePlacementMethodOptions

Placement on intersection curve created by a plane and the faces

SECTION_PLANE - Static variable in class nxopen.weld.WeldPointLocation

Place spot welds along a section curve

SECTION_PROPERTY - Static variable in class nxopen.cae.optimization.DAODesignVariableBuilder.Variable

Section property variables

SECTION_REVERSE_NORMAL_SIDE - Static variable in class nxopen.features.sheetmetal.BeadBuilder.HeightSideOptions

Material removed on the side opposite to that of the section normal

SECTION_REVERSE_NORMAL_SIDE - Static variable in class nxopen.features.sheetmetal.BendBuilder.BendDirectionOptions

Bend is created on the side opposite to that of the section normal

SECTION_REVERSE_NORMAL_SIDE - Static variable in class nxopen.features.sheetmetal.ContourFlangeBuilder.SweepSideOptions

SECTION_REVERSE_NORMAL_SIDE - Static variable in class nxopen.features.sheetmetal.DimpleBuilder.DepthTypeOptions

Dimple punched on the side opposite to that of the section normal

SECTION_REVERSE_NORMAL_SIDE - Static variable in class nxopen.features.sheetmetal.DrawnCutoutBuilder.DepthTypeOptions

Drawn Cutout punched on the side opposite to that of the section normal

SECTION_REVERSE_NORMAL_SIDE - Static variable in class nxopen.features.sheetmetal.JogBuilder.DirectionTypeOptions

jog created on the side opposite to that of the section normal

SECTION_REVERSE_NORMAL_SIDE - Static variable in class nxopen.features.sheetmetal.LouverBuilder.DepthSideOptions

Material added on the side opposite to that of the section normal.

SECTION_REVERSE_NORMAL_SIDE - Static variable in class nxopen.features.sheetmetal.NormalCutoutBuilder.DepthSideOptions

Material removed on the side opposite to that of the section normal

SECTION_REVERSE_NORMAL_SIDE - Static variable in class nxopen.features.sheetmetal.TabBuilder.ThicknessSideOptions

Material created on the side opposite to that of the section normal

SECTION_SIDE_LEFT - Static variable in class nxopen.features.sheetmetal.BendBuilder.FixedSideOptions

Side pointed to by the inverse of the tangent cross normal vector

SECTION_SIDE_LEFT - Static variable in class nxopen.features.sheetmetal.JogBuilder.FixedSideOptions

Side pointed to by the inverse of the tangent cross normal vector

SECTION_SIDE_RIGHT - Static variable in class nxopen.features.sheetmetal.BendBuilder.FixedSideOptions

Side pointed to by the tangent cross normal vector

SECTION_SIDE_RIGHT - Static variable in class nxopen.features.sheetmetal.JogBuilder.FixedSideOptions

Side pointed to by the tangent cross normal vector

SECTION_SUBTYPE - Static variable in class nxopen.uf.UFView.Subtype

SECTION_TYPE - Static variable in class nxopen.features.shipdesign.ShipnameFieldBuilderType

Field whose value comes from sub section type

SECTIONAL - Static variable in class nxopen.die.AddendumSectionBuilder.SurfaceBuildType

Create sectional sweep surface.

SECTIONAL - Static variable in class nxopen.die.AddSurfBuilder.Methods

Sweep section around tangency curve.

SECTIONAL - Static variable in class nxopen.features.BridgeCurveBuilder.SurfaceDirectionTypes

Deprecated.

bridge direction takes non-isoparametric direction of the base surface at the selected point

SECTIONAL - Static variable in class nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder.CurvatureTypes

Sectional

SECTIONAL - Static variable in class nxopen.geometricanalysis.RadiusAnalysisBuilder.Types

Sectional radius.

SECTIONAL - Static variable in class nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder.CurvatureType

SECTIONAL - Static variable in class nxopen.geometricutilities.BridgeCurveConnectivity.FaceDirectionOptions

Sectional direction

sectionAlignment() - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder

Returns the Section Alignment
License requirements: solid_modeling ("SOLIDS MODELING")
.

sectionAlignmentDirection() - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder

Returns the section alignment vector
License requirements: solid_modeling ("SOLIDS MODELING")
.

sectionAlignmentVector() - Method in interface nxopen.features.AestheticFaceBlendBuilder

Returns the section alignment vector
License requirements: None.

SectionAnalysisBuilder - Interface in nxopen.geometricanalysis.sectionanalysis

Represents a SectionAnalysisObject builder.

SectionAnalysisBuilder.CalculationMethodType - Class in nxopen.geometricanalysis.sectionanalysis

The calculation method

SectionAnalysisBuilder.NeedleDirectionType - Class in nxopen.geometricanalysis.sectionanalysis

The needle direction

SectionAnalysisBuilder.OutputType - Class in nxopen.geometricanalysis.sectionanalysis

The output options

SectionAnalysisBuilder.ScalingMethodType - Class in nxopen.geometricanalysis.sectionanalysis

The scaling method

SectionAnalysisBuilder.Types - Class in nxopen.geometricanalysis.sectionanalysis

Represents the sectioning types

SectionAnalysisExBuilder - Interface in nxopen.geometricanalysis.sectionanalysis

Represents a SectionAnalysisExObject builder
To create a new instance of this class, use AnalysisObjectCollection.createSectionAnalysisExBuilder(nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExObject)
Default values.

SectionAnalysisExBuilder.AlignmentType - Class in nxopen.geometricanalysis.sectionanalysis

The section alignment type

SectionAnalysisExBuilder.CalculationMethodType - Class in nxopen.geometricanalysis.sectionanalysis

The calculation method

SectionAnalysisExBuilder.NeedleDirectionType - Class in nxopen.geometricanalysis.sectionanalysis

The needle direction

SectionAnalysisExBuilder.OutputType - Class in nxopen.geometricanalysis.sectionanalysis

The output options

SectionAnalysisExBuilder.PlacementType - Class in nxopen.geometricanalysis.sectionanalysis

The types of the section placement

SectionAnalysisExBuilder.ScalingMethodType - Class in nxopen.geometricanalysis.sectionanalysis

The scaling method

SectionAnalysisExObject - Interface in nxopen.geometricanalysis.sectionanalysis

Represents a Section Analysis Object of the new version.

SectionAnalysisObject - Interface in nxopen.geometricanalysis

Represents a Section Analysis object.

sectionAngle() - Method in interface nxopen.geometricutilities.BridgeCurveConnectivity

Returns the section angle.

sectionArea() - Method in interface nxopen.features.SectionInertiaAnalysisBuilder

Returns the section area
License requirements: None.

sectionAskParallelData(Tag) - Method in interface nxopen.uf.UFCurve

Refer to UF_CURVE_section_ask_parallel_data for documentation.

SectionAskParallelData() - Constructor for class nxopen.uf.UFCurve.SectionAskParallelData

sectionAskPerpcrvData(Tag) - Method in interface nxopen.uf.UFCurve

Refer to UF_CURVE_section_ask_perpcrv_data for documentation.

SectionAskPerpcrvData() - Constructor for class nxopen.uf.UFCurve.SectionAskPerpcrvData

sectionAskPlanesData(Tag) - Method in interface nxopen.uf.UFCurve

Refer to UF_CURVE_section_ask_planes_data for documentation.

SectionAskPlanesData() - Constructor for class nxopen.uf.UFCurve.SectionAskPlanesData

sectionAskRadialData(Tag) - Method in interface nxopen.uf.UFCurve

Refer to UF_CURVE_section_ask_radial_data for documentation.

SectionAskRadialData() - Constructor for class nxopen.uf.UFCurve.SectionAskRadialData

sectionAskType(Tag) - Method in interface nxopen.uf.UFCurve

Refer to UF_CURVE_section_ask_type for documentation.

sectionAtAftEnd() - Method in interface nxopen.cae.BeamElementInfo

Returns the cross section at the aft end of the beam element.

sectionAtForeEnd() - Method in interface nxopen.cae.BeamElementInfo

Returns the cross section at the fore end of the beam element.

SectionBasedMatrixRecord - Interface in nxopen.cae.ftk

Represents a kind of record data could be displayed by 3D graphing.

SectionBuilder - Interface in nxopen.blockstyler

Represents a Section Builder .

SectionCollection - Interface in nxopen

This class contains the factory methods for creating a section.

SectionCollection.LoopOption - Class in nxopen

Defines how section are created in SectionCollection.createSectionsUsingCurves(nxopen.NXObject[], nxopen.SectionCollection.LoopOption, double, double, double)

sectionCornerRadius() - Method in interface nxopen.features.sheetmetal.LighteningCutoutBuilder

Returns the section corner radius
License requirements: None.

sectionCount() - Method in interface nxopen.cae.ftk.SectionBasedMatrixRecord

Returns the section count
License requirements: nx_ftk ("NX Advanced Graphing")
.

SectionCurve - Interface in nxopen.features

Represents a section curves feature.

sectionCurve() - Method in interface nxopen.features.vehicledesign.GroundClearanceBuilder

Returns the section curve type of the under axle surface.

sectionCurveAskParents(Tag) - Method in interface nxopen.uf.UFCurve

Refer to UF_CURVE_section_curve_ask_parents for documentation.

SectionCurveAskParentsData() - Constructor for class nxopen.uf.UFCurve.SectionCurveAskParentsData

SectionCurveBuilder - Interface in nxopen.features

Represents a SectionCurve builder.

SectionCurveBuilder.PlaneType - Class in nxopen.features

Represents section plane type.

SectionCurveBuilder.SpacingType - Class in nxopen.features

Represents spacing type.

sectionCurveSettings() - Method in interface nxopen.display.BoundedGridBuilder

Returns the curve settings builder
License requirements: None.

SectionCurveSettingsBuilder - Interface in nxopen.display

Represents a SectionCurveSettingsBuilder
Created in NX6.0.0

SectionCurveSettingsBuilder.ColorOptionType - Class in nxopen.display

Specifies the color of the curves.

sectionCurvesFeature - Variable in class nxopen.uf.UFCurve.SectionCurveAskParentsData

SectionData() - Constructor for class nxopen.cae.ftk.ComplexSectionBasedMatrixRecord.SectionData

SectionData() - Constructor for class nxopen.cae.ftk.RealSectionBasedMatrixRecord.SectionData

sectionData() - Method in interface nxopen.features.shipdesign.BracketBuilder

Returns the section data.

sectionData() - Method in interface nxopen.features.shipdesign.CollarPlateBuilder

Returns the section data.

SectionData - Interface in nxopen

Represents section data .

SectionDrawingBuilder - Interface in nxopen.features.shipdesign

This builder allows you to define the section drawing information.

SectionDrawingBuilder.SectionsPerDrawingOptions - Class in nxopen.features.shipdesign

Settings to indicate the section per drawing.

SectionDrawingBuilder.ViewsPerSheetOptions - Class in nxopen.features.shipdesign

Settings to indicate the views per sheet.

SectionDrawingBuilder.ViewTypeOptions - Class in nxopen.features.shipdesign

Settings to indicate the view type.

SECTIONED - Static variable in class nxopen.uf.UFDraw.CompSectionInView

SECTIONED_PART - Static variable in class nxopen.drawings.SectionViewBuilder.SectionCutType

sectionedHiddenColor() - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder

Returns the sectioned hidden color on the Ship Structure Lines
License requirements: None.

sectionedHiddenFont() - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder

Returns the sectioned hidden font on the Ship Structure Lines
License requirements: None.

sectionedHiddenWidth() - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder

Returns the sectioned hidden width on the Ship Structure Lines
License requirements: None.

SectionEdit - Interface in nxopen.features

Represents a section edit feature
To create or edit an instance of this class, use SectionEditBuilder

Created in NX6.0.0

SectionEditBuilder - Interface in nxopen.features

Represents a SectionEdit builder
To create a new instance of this class, use FeatureCollection.createSectionEditBuilder(nxopen.features.SectionEdit)

Created in NX6.0.0

SectionEditorBuilder - Interface in nxopen.features.shipdesign

Represents a SectionEditorBuilder builder.

sectionedSecondaryHiddenColor() - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder

Returns the Secondary sectioned hidden color on the Ship Structure Lines
License requirements: None.

sectionedSecondaryHiddenFont() - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder

Returns the Secondary sectioned hidden font on the Ship Structure Lines
License requirements: None.

sectionedSecondaryHiddenWidth() - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder

Returns the Secondary sectioned hidden width on the Ship Structure Lines
License requirements: None.

sectionedSecondaryVisibleColor() - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder

Returns the Secondary sectioned visible color on the Ship Structure Lines
License requirements: None.

sectionedSecondaryVisibleFont() - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder

Returns the Secondary sectioned visible font on the Ship Structure Lines
License requirements: None.

sectionedSecondaryVisibleWidth() - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder

Returns the Secondary sectioned visible width on the Ship Structure Lines
License requirements: None.

sectionedVisibleColor() - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder

Returns the sectioned visible color on the Ship Structure Lines
License requirements: None.

sectionedVisibleFont() - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder

Returns the sectioned visible font on the Ship Structure Lines
License requirements: None.

sectionedVisibleWidth() - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder

Returns the sectioned visible width on the Ship Structure Lines
License requirements: None.

sectionElement - Variable in class nxopen.SectionElementData.Data

The element that constructs the section

sectionElement - Variable in class nxopen.SectionElementData.SectionElementData1

The element that constructs the section - this can be curve or point.

SectionElementData - Interface in nxopen

Represents section element data .

SectionElementData.Data - Class in nxopen

This class holds the data returned from SectionElementData.getSectionElementData()

SectionElementData.SectionElementData1 - Class in nxopen

This class holds the data returned from SectionElementData.getSectionElementData1()

SectionElementData1() - Constructor for class nxopen.SectionElementData.SectionElementData1

sectionEndGuide() - Method in interface nxopen.features.SectionSurfaceBuilderEx

Returns the section end guide.

sectionFileBrowser() - Method in interface nxopen.linedesigner.CreateFenceBuilder

Returns the section file browser
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

sectionFrameType() - Method in interface nxopen.features.shipdesign.SelectPartBuilder

Returns the select type.

sectionFromParallelPlanes(UFCurve.SectionGeneralData, UFCurve.SectionParallelData) - Method in interface nxopen.uf.UFCurve

Refer to UF_CURVE_section_from_parallel_planes for documentation.

sectionFromPerpcrvPlanes(UFCurve.SectionGeneralData, UFCurve.SectionPerpcrvData) - Method in interface nxopen.uf.UFCurve

Refer to UF_CURVE_section_from_perpcrv_planes for documentation.

sectionFromPlanes(UFCurve.SectionGeneralData, UFCurve.SectionPlanesData) - Method in interface nxopen.uf.UFCurve

Refer to UF_CURVE_section_from_planes for documentation.

sectionFromRadialPlanes(UFCurve.SectionGeneralData, UFCurve.SectionRadialData) - Method in interface nxopen.uf.UFCurve

Refer to UF_CURVE_section_from_radial_planes for documentation.

SectionGeneralData() - Constructor for class nxopen.uf.UFCurve.SectionGeneralData

SectionGeneralData(Tag[], int, int, int, int, double, UFModl.CurveFitData) - Constructor for class nxopen.uf.UFCurve.SectionGeneralData

sectionGeometryTolerance() - Method in interface nxopen.drawings.ViewSettingsBuilder

Returns the section geometry tolerance
License requirements: None.

sectionGuide() - Method in interface nxopen.features.shipdesign.SteelVentHolesBuilder

Returns the section guide - vent holes are placed along this guide
License requirements: None.

sectionGuide() - Method in interface nxopen.features.shipdesign.VentilationHoles2Builder

Returns the section guide
License requirements: None.

sectionHeight() - Method in interface nxopen.motion.TirePropertyAdvancedParameters

Returns the section height.

SectionInertiaAnalysis - Interface in nxopen.features

Represents a section inertia analysis feature
To create or edit an instance of this class, use SectionInertiaAnalysisBuilder

Created in NX5.0.0

SectionInertiaAnalysisBuilder - Interface in nxopen.features

Represents a SectionInertiaAnalysis builder
To create a new instance of this class, use FeatureCollection.createSectionInertiaAnalysisBuilder(nxopen.features.SectionInertiaAnalysis)
Default values.

SectionInertiaAnalysisBuilder.CoordSys - Class in nxopen.features

The coordinate system associated with the analysis.

SectionInertiaAnalysisBuilder.PropertyType - Class in nxopen.features

Type of Analysis property.

SectionInertiaAnalysisBuilder.SampleMethod - Class in nxopen.features

Type of sampling method to be used in sections along curve type of analysis.

SectionInertiaAnalysisBuilder.SectionAxisNormal - Class in nxopen.features

Slice direction in case of parallel section type of analysis.

SectionInertiaAnalysisBuilder.Types - Class in nxopen.features

The type of Section Inertia Analysis to be performed.

sectioningMethod() - Method in interface nxopen.features.SectionInertiaAnalysisBuilder

Returns the sectioning method
License requirements: None.

sectioningObjects - Variable in class nxopen.uf.UFCurve.SectionCurveAskParentsData

sectionInteriorGuide1() - Method in interface nxopen.features.SectionSurfaceBuilderEx

Returns the interior guide1.

sectionInteriorGuide2() - Method in interface nxopen.features.SectionSurfaceBuilderEx

Returns the section interior guide2.

sectionInteriorGuide3() - Method in interface nxopen.features.SectionSurfaceBuilderEx

Returns the section interior guide3.

SectionInViewBuilder - Interface in nxopen.drawings

This builder allows the user to select a view in which component or solid body objects can be designated as section, non-sectioned, or neither
To create a new instance of this class, use DraftingViewCollection.createSectionInViewBuilder()
Default values.

SectionInViewBuilder.EditSxtype - Class in nxopen.drawings

Edit Section type

sectionLayer() - Method in interface nxopen.features.SectionInertiaAnalysisBuilder

Returns the section layer
License requirements: None.

sectionLayer() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

Returns the layer of the tire envelope sections.

sectionLength() - Method in interface nxopen.features.SectionInertiaAnalysisBuilder

Returns the section length
License requirements: None.

SectionLine - Interface in nxopen.drawings

Represents a Section Line.

sectionLine() - Method in interface nxopen.drawings.SectionViewBuilder

Returns the section Line
License requirements: None.

sectionLine() - Method in interface nxopen.drawings.SpecifySectionLineBuilder

Returns the section line
License requirements: drafting ("DRAFTING")
.

SectionLineBuilder - Interface in nxopen.drawings

Deprecated.

Deprecated in NX10.0.0. Use nxopen.drawings.SectionViewBuilder#sectionLineType

SectionLineBuilder.Types - Class in nxopen.drawings

Deprecated.

Section Line type

SectionLineCollection - Interface in nxopen.drawings

Represents a collection of SectionLine s.

SectionLineCreationBuilder - Interface in nxopen.tooling

Represents a SectionLineCreationBuilder which is used to create or edit the section line creation.

sectionLineOnlyPlacementOrigin() - Method in interface nxopen.drawings.SectionLineSegmentsBuilder

Returns the section line only placement origin center in inferred mode
License requirements: None.

sectionLines() - Method in interface nxopen.DraftingManager

Section Line Collection .

SectionLineSegmentBuilder - Interface in nxopen.drawings

Represents a SectionLineSegmentBuilder .

SectionLineSegmentBuilder.Types - Class in nxopen.drawings

the point

SectionLineSegmentBuilderList - Interface in nxopen.drawings

Represents a list of objects.

SectionLineSegmentPointBuilder - Interface in nxopen.drawings

Represents Section Line Segment Point Builder
To create a new instance of this class, use SectionLineSegmentPointListBuilder.createSectionLineSegmentPointBuilder()

Created in NX10.0.0

SectionLineSegmentPointBuilder.SegmentTypes - Class in nxopen.drawings

Section Segment Types

SectionLineSegmentPointListBuilder - Interface in nxopen.drawings

Represents SectionLineSegmentPointListBuilder class.

sectionLineSegments() - Method in interface nxopen.drawings.SectionViewBuilder

Returns the section line segment builder
License requirements: None.

SectionLineSegmentsBuilder - Interface in nxopen.drawings

Represents a class Drawings.SectionLineSegmentsBuilder.

SectionLineSettingsBuilder - Interface in nxopen.drawings

Represents the Section Line Settings Builder (Drawings.SectionLineSettingsBuilder) which manages all the style attributes related to the section Line including label letter.

SectionLineStyleBuilder - Interface in nxopen.drawings

Represents a Drawings.SectionLineStyleBuiler.

SectionLineStyleBuilder.ArrowheadStyleType - Class in nxopen.drawings

Deprecated.

Deprecated in NX10.0.0. Use nxopen.drawings.ViewSectionLineBuilder#styleType instead.

SectionLineStyleBuilder.CreateSectionLineType - Class in nxopen.drawings

Deprecated.

Deprecated in NX10.0.0. Use nxopen.drawings.ViewSectionLineBuilder#showSectionLineType instead.

SectionLineStyleBuilder.FontStyle - Class in nxopen.drawings

Deprecated.

Deprecated in NX10.0.0. This API is not supported yet and should not be used.

SectionLineStyleBuilder.LabelLocationStyle - Class in nxopen.drawings

Deprecated.

Deprecated in NX10.0.0. Use nxopen.drawings.ViewSectionLineBuilder#locationType instead.

SectionLineStyleBuilder.StandardStyle - Class in nxopen.drawings

Deprecated.

Deprecated in NX10.0.0. Use nxopen.drawings.ViewSectionLineBuilder#displayType instead.

SectionLineStyleBuilder.WidthStyle - Class in nxopen.drawings

Deprecated.

Deprecated in NX10.0.0. This API is not supported yet and should not be used.

sectionLineType() - Method in interface nxopen.drawings.SketchSectionLineBuilder

Returns the section line type
License requirements: None.

sectionList() - Method in interface nxopen.features.StudioSurfaceBuilder

Returns the list of sections
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

sectionList() - Method in interface nxopen.features.StyledSweepBuilder

Returns the list of sections.

sectionList() - Method in interface nxopen.features.SweptBuilder

Returns the list of sections.

SectionList - Interface in nxopen

Represents a list of objects.

sectionLocation() - Method in interface nxopen.features.SweptBuilder

Returns the section location option.

sectionMappingFile() - Method in interface nxopen.features.shipdesign.TransitionBuilder

Returns the file name of the section mapping from the native file system
License requirements: None.

sectionMatrix - Variable in class nxopen.ModelingView.DisplaySectioningData

Section planes matrix relative to ABS coord

sectionMethodCircleTangent() - Method in interface nxopen.features.SectionSurfaceBuilderEx

Returns the section method circle tangent.

sectionMethodCircularTangent() - Method in interface nxopen.features.SectionSurfaceBuilder

Deprecated.

Deprecated in NX9.0.0. Use SectionSurfaceBuilderEx instead.

sectionMethodFilletBridge() - Method in interface nxopen.features.SectionSurfaceBuilder

Deprecated.

Deprecated in NX9.0.0. Use SectionSurfaceBuilderEx instead.

sectionMethodFilletBridge() - Method in interface nxopen.features.SectionSurfaceBuilderEx

Returns the section method fillet bridge.

sectionMethodRho() - Method in interface nxopen.features.SectionSurfaceBuilder

Deprecated.

Deprecated in NX9.0.0. Use SectionSurfaceBuilderEx instead.

sectionMethodRho() - Method in interface nxopen.features.SectionSurfaceBuilderEx

Returns the section method rho.

sectionName() - Method in interface nxopen.cae.IBeamSectionBuilder

Returns the section name
License requirements: None.

sectionName() - Method in interface nxopen.features.shipdesign.ShipSectionBuilder

Returns the section name
License requirements: None.

sectionNormal() - Method in interface nxopen.features.SectionInertiaAnalysisBuilder

Returns the section normal
License requirements: None.

sectionNumber() - Method in interface nxopen.features.shipdesign.ManufacturingPreparationBuilder

Returns the ship section number.

sectionNumber() - Method in interface nxopen.features.shipdesign.SteelDistributionBuilder

Returns the section number
License requirements: None.

sectionNumber1() - Method in interface nxopen.geometricanalysis.sectionanalysis.GridSpacingBuilder

Returns the number of sections in direction 1
License requirements: studio_analyze ("STUDIO ANALYZE")
.

sectionNumber2() - Method in interface nxopen.geometricanalysis.sectionanalysis.GridSpacingBuilder

Returns the number of sections in direction 2
License requirements: studio_analyze ("STUDIO ANALYZE")
.

sectionObject() - Method in interface nxopen.features.subdivision.SubdivisionRevolveBuilder

Returns the section as revolving profile.

sectionOffset() - Method in interface nxopen.tooling.RunnerBuilder

Returns the offset value of the runner section.

sectionOption() - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder

Returns whether to use a section plane or maninpulator for sectional curvatures.

sectionOrientation() - Method in interface nxopen.die.AddendumSectionBuilder

Returns the section orientation.

sectionOrientation() - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder

Returns the section orientation for sectional curvatures.

sectionOrientationGuide() - Method in interface nxopen.features.SectionSurfaceBuilderEx

Returns the section orientation guide.

sectionOrientationOption() - Method in interface nxopen.features.StyledSweepBuilder

Returns the section orientation option
License requirements: None.

sectionOrigin() - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder

Returns the section origin for sectional curvatures.

sectionOrigin - Variable in class nxopen.ModelingView.DisplaySectioningData

Center of rectangle representing the active plane

SectionParallelData() - Constructor for class nxopen.uf.UFCurve.SectionParallelData

SectionParallelData(Tag, double, double, double) - Constructor for class nxopen.uf.UFCurve.SectionParallelData

sectionPart() - Method in interface nxopen.features.shipdesign.ShipSectionBuilder

Returns the section part
License requirements: None.

SectionPerpcrvData() - Constructor for class nxopen.uf.UFCurve.SectionPerpcrvData

SectionPerpcrvData(Tag, int, int, int, double, double, double, double, double) - Constructor for class nxopen.uf.UFCurve.SectionPerpcrvData

sectionPlacement() - Method in interface nxopen.die.ThroatChildBuilder

Returns the throat section placement along the center line, an expression containg the length along the centerline for placement
License requirements: ug_die_design ("Die Design")
.

sectionPlane() - Method in interface nxopen.die.AddendumSectionBuilder

Returns the section plane.

sectionPlane() - Method in interface nxopen.features.SectionCurveBuilder

Returns the plane
License requirements: None.

sectionPlane() - Method in interface nxopen.features.shipdesign.SectionViewBuilder

Returns the section plane
License requirements: None.

sectionPlane() - Method in interface nxopen.features.TextBuilder

Returns the section plane for TextBuilder.Types.ON_FACE type
License requirements: None.

SectionPlaneBuilder - Interface in nxopen.geometricanalysis.sectionanalysis

Represents a plane which is used to cut sections on faces or facet bodies .

SectionPlaneBuilder.PlaneType - Class in nxopen.geometricanalysis.sectionanalysis

The type of different section planes

SectionPlaneData - Interface in nxopen.geometricutilities

Represents a Section Plane Data class This class acts like a container to hold the data needed to create a plane.

sectionPlaneEntity() - Method in interface nxopen.weld.WeldPointBuilder

Returns
License requirements: ugweld ("UG WELD")
.

sectionPlaneName() - Method in interface nxopen.features.shipdesign.SectionViewBuilder

Returns the section plane name
License requirements: None.

sectionPlaneNormal() - Method in interface nxopen.weld.DatumCommonBuilder

Returns the section plane normal.

sectionPlanes() - Method in interface nxopen.features.SectionCurveBuilder

Returns the selected planes
License requirements: None.

SectionPlanesData() - Constructor for class nxopen.uf.UFCurve.SectionPlanesData

SectionPlanesData(Tag[], int) - Constructor for class nxopen.uf.UFCurve.SectionPlanesData

sectionPoint() - Method in interface nxopen.die.AddendumSectionBuilder

Returns the origin point where the section will be located.

sectionPrefs - Variable in class nxopen.uf.UFPlist.Prefs

SectionPrefs() - Constructor for class nxopen.uf.UFTabnot.SectionPrefs

SectionPrefs(UFTabnot.HeaderLocation, double, UFTabnot.OverflowDirection, double, UFTabnot.AttachPoint, boolean, double, UFTabnot.DisplayContinuationNote, String) - Constructor for class nxopen.uf.UFTabnot.SectionPrefs

sectionProperties() - Method in interface nxopen.cae.BeamSection

Returns the section properties
License requirements: None.

sectionPropertiesAtAftEnd() - Method in interface nxopen.cae.BeamElementInfo

Returns the section properties at the aft end of the beam element.

sectionPropertiesAtForeEnd() - Method in interface nxopen.cae.BeamElementInfo

Returns the section properties at the fore end of the beam element.

SectionRadialData() - Constructor for class nxopen.uf.UFCurve.SectionRadialData

SectionRadialData(Tag, Tag, double, double, double) - Constructor for class nxopen.uf.UFCurve.SectionRadialData

sectionRebuild() - Method in interface nxopen.features.StudioSurfaceBuilder

Returns the section rebuild
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

sectionRebuildData() - Method in interface nxopen.features.StyledSweepBuilder

Returns the section rebuild data
License requirements: None.

sectionRebuildData() - Method in interface nxopen.features.SweptBuilder

Returns the section rebuild data
License requirements: None.

sectionRule() - Method in interface nxopen.features.shipdesign.SectionEditorBuilder

Returns the ship section rule method
License requirements: None.

sectionRule() - Method in interface nxopen.features.shipdesign.SectionViewBuilder

Returns the section rule
License requirements: None.

sections() - Method in interface nxopen.BasePart

Returns the SectionCollection instance belonging to this part .

sections() - Method in interface nxopen.die.AddendumSectionBuilder

Returns the addendum sections to edit.

sections() - Method in interface nxopen.features.SectionInertiaAnalysisBuilder

Returns the sections
License requirements: None.

sections() - Method in interface nxopen.features.subdivision.SubdivisionLoftBuilder

Returns the section objects for lofting
License requirements: None.

sections() - Method in interface nxopen.features.subdivision.SubdivisionSweepBuilder

Returns the section objects.

SECTIONS_ALONG_CURVE - Static variable in class nxopen.features.SectionInertiaAnalysisBuilder.Types

Sections Along Path Type

sectionScaling1() - Method in interface nxopen.features.AestheticFaceBlendBuilder

Returns the section scaling
License requirements: None.

sectionScaling2() - Method in interface nxopen.features.AestheticFaceBlendBuilder

Returns the section scaling2
License requirements: None.

sectionSeed - Variable in class nxopen.cae.CaeGroupCollection.AutoGroupSeedNames

prefix seed name for auto groups grouped by 1-D section

sectionShape() - Method in interface nxopen.die.AddendumSectionBuilder

Returns the section shape.

sectionShape() - Method in interface nxopen.tooling.RunnerBuilder

Returns the section shape type of runner.

sectionSheetBodies() - Method in interface nxopen.drawings.SectionViewStyle

Returns the status of section sheet bodies.

sectionSheetBodies() - Method in interface nxopen.preferences.SectionViewPreferences

Returns the status of section sheet bodies.

sectionSide() - Method in interface nxopen.features.sheetmetal.DimpleBuilder

Returns the section Side for the Dimple section.

sectionSide() - Method in interface nxopen.features.sheetmetal.DrawnCutoutBuilder

Returns the section side for the Drawn Cutout.

sectionSide() - Method in interface nxopen.features.sheetmetal.LouverBuilder

Returns the side of the section on which the louver is created and width is measure.

sectionSide() - Method in interface nxopen.features.sheetmetal.NormalCutoutBuilder

Returns the side of the section that the normal cutout removes material.

sectionSketch() - Method in interface nxopen.features.EditCrossSectionBuilder

Returns the sketch which holds the section curves
License requirements: None.

sectionsList() - Method in interface nxopen.features.ThroughCurvesBuilder

Returns the sections list which is required.

sectionsPerDrawing() - Method in interface nxopen.features.shipdesign.SectionDrawingBuilder

Returns the sct per drawing
License requirements: None.

sectionStartGuide() - Method in interface nxopen.features.SectionSurfaceBuilderEx

Returns the section start guide.

SectionSurface - Interface in nxopen.features

Represents a section surface feature
To create or edit an instance of this class, use SectionSurfaceBuilder

Created in NX6.0.0

SectionSurfaceBuilder - Interface in nxopen.features

Deprecated.

Deprecated in NX9.0.0. Use SectionSurfaceBuilderEx instead.

SectionSurfaceBuilder.ControlRegionEnum - Class in nxopen.features

Deprecated.

This enum represents the type of the region where depth and skew can be applied

SectionSurfaceBuilder.FlowDirectionEnum - Class in nxopen.features

Deprecated.

This enum represents the type of flow direction for the start/end of the section surface

SectionSurfaceBuilder.SectionMethodCircularTangentEnum - Class in nxopen.features

Deprecated.

This enum represents the current types of section method for circular tangent method

SectionSurfaceBuilder.SectionMethodFilletBridgeEnum - Class in nxopen.features

Deprecated.

This enum represents the current types of section method for fillet bridge method

SectionSurfaceBuilder.SectionMethodRhoEnum - Class in nxopen.features

Deprecated.

This enum represents the current types of section method for section methods with rho law

SectionSurfaceBuilder.Types - Class in nxopen.features

Deprecated.

This enum represents the current types of section surface methods

SectionSurfaceBuilder.UDegreeEnum - Class in nxopen.features

Deprecated.

This enum represents the current types of section surface in u direction

SectionSurfaceBuilderEx - Interface in nxopen.features

Represents a SectionSurface builder.

SectionSurfaceBuilderEx.BodyType - Class in nxopen.features

Body Preference type.

SectionSurfaceBuilderEx.CircularType - Class in nxopen.features

This enum represents the current modes of circular type section surfaces.

SectionSurfaceBuilderEx.ConicType - Class in nxopen.features

This enum represents the current modes of conic type section surfaces.

SectionSurfaceBuilderEx.ControlRegionType - Class in nxopen.features

Control Region type.

SectionSurfaceBuilderEx.CubicType - Class in nxopen.features

This enum represents the current modes of cubic type section surfaces.

SectionSurfaceBuilderEx.LinearType - Class in nxopen.features

This enum represents the current modes of linear type section surfaces.

SectionSurfaceBuilderEx.SectionMethodCircleTangentType - Class in nxopen.features

Section method Circle Tangent type.

SectionSurfaceBuilderEx.SectionMethodFilletBridgeType - Class in nxopen.features

Section method Fillet Bridge type.

SectionSurfaceBuilderEx.SectionMethodRhoType - Class in nxopen.features

Section method Rho type.

SectionSurfaceBuilderEx.SlopeControlType - Class in nxopen.features

Slope Control type.

SectionSurfaceBuilderEx.Spine - Class in nxopen.features

Spine type.

SectionSurfaceBuilderEx.SpineEndFlowType - Class in nxopen.features

Spine End Flow type.

SectionSurfaceBuilderEx.SpineStartFlowType - Class in nxopen.features

Spine Start Flow type.

SectionSurfaceBuilderEx.Types - Class in nxopen.features

This enum represents the current types of section surface methods.

SectionSurfaceBuilderEx.UDegreeType - Class in nxopen.features

Surface Degree type.

sectionSurfaceRebuildData() - Method in interface nxopen.features.ThroughCurvesBuilder

Returns the section surface rebuild data.

sectionTemplateString() - Method in interface nxopen.features.ThroughCurvesBuilder

Returns the section template curve.

sectionToProject() - Method in interface nxopen.features.ProjectCurveBuilder

Returns the section to project
License requirements: None.

sectionType() - Method in interface nxopen.drawings.SketchSectionLineBuilder

Returns the section type
License requirements: None.

sectiontype - Variable in class nxopen.features.EdgeBlendBuilder.ChainsetAndSectionValueData

The section type of this chain set collector

sectionType() - Method in interface nxopen.features.shipdesign.EditStockBuilder

Returns the section type (profile or built up) for pillar system.

sectionType() - Method in interface nxopen.features.shipdesign.PillarBuilder

Returns the section type (profile or plate)
License requirements: None.

sectionType() - Method in interface nxopen.features.shipdesign.PillarSystemBuilder

Returns the section type (profile or plate)
License requirements: None.

sectionType() - Method in interface nxopen.features.shipdesign.ProfileBuilder

Returns the section type
License requirements: None.

sectionType() - Method in interface nxopen.features.shipdesign.QualifySketchBuilder

Returns the section type.

sectionType() - Method in interface nxopen.features.shipdesign.ShipSectionBuilder

Returns the creation method
License requirements: None.

sectionType() - Method in interface nxopen.features.shipdesign.SteelFeatureSpreadsheetBuilder

Deprecated.

Deprecated in NX8.5.0. Removed with no replacement

sectionType() - Method in interface nxopen.features.shipdesign.StiffenerStockBuilder

Returns the section type (profile or plate)
License requirements: None.

sectionTypesInUserControl() - Method in interface nxopen.features.shipdesign.ProfileCutoutBuilder

Returns the flag to indicate if the section types have been modified by user.

sectionVector() - Method in interface nxopen.tooling.RunnerBuilder

Returns the vector indicating the runner section direction.

SectionView - Interface in nxopen.drawings

Represents a Section View.

SectionViewBuilder - Interface in nxopen.drawings

Represents a SectionView builder
To create a new instance of this class, use DraftingViewCollection.createSectionViewBuilder(nxopen.NXObject)
Default values.

SectionViewBuilder - Interface in nxopen.features.shipdesign

It represents SectionViewBuilder .

SectionViewBuilder.DirectionOptions - Class in nxopen.features.shipdesign

Settings to indicate the view direction

SectionViewBuilder.PlaneTypes - Class in nxopen.features.shipdesign

Settings to indicate the plane type

SectionViewBuilder.SectionCutType - Class in nxopen.drawings

Section Line Cut type

SectionViewBuilder.SectionLineType - Class in nxopen.drawings

Section Line type

SectionViewBuilder.SectionRuleOptions - Class in nxopen.features.shipdesign

Settings to indicate the section rule

SectionViewBuilder.SectionViewModeType - Class in nxopen.drawings

Section Line Mode

SectionViewBuilder.SymmetricalStructureOptions - Class in nxopen.features.shipdesign

Settings to indicate to show symmetrical structure

SectionViewBuilderList - Interface in nxopen.features.shipdesign

Represents a list of objects.

sectionViewButtonClicked() - Method in interface nxopen.tooling.AssemblyDrawingBuilder

Returns the section view button clicked attribute
License requirements: None.

sectionViewMode() - Method in interface nxopen.drawings.SectionViewBuilder

Returns the section line mode
License requirements: None.

sectionViewNamePrefix() - Method in interface nxopen.annotations.PmiPreferences

Returns the Section View name prefix
License requirements: None.

SectionViewPreferences - Interface in nxopen.preferences

Represents set of Section View Preferences applicable to drafting views.

SectionViewStyle - Interface in nxopen.drawings

Represents set of Section View Style Preferences applicable to drafting views.

sectionViewTool() - Method in interface nxopen.drawings.SectionViewBuilder

Returns the section view tool
License requirements: None.

sectionViewType() - Method in interface nxopen.drawings.SectionViewBuilder

Returns the section line type
License requirements: None.

sectionWidth() - Method in interface nxopen.motion.TirePropertyAdvancedParameters

Returns the section width.

sectionXMax() - Method in interface nxopen.features.shipdesign.ShipSectionBuilder

Returns the section xmax
License requirements: None.

sectionXMin() - Method in interface nxopen.features.shipdesign.ShipSectionBuilder

Returns the section xmin
License requirements: None.

sectionYMax() - Method in interface nxopen.features.shipdesign.ShipSectionBuilder

Returns the section ymax
License requirements: None.

sectionYMin() - Method in interface nxopen.features.shipdesign.ShipSectionBuilder

Returns the section ymin
License requirements: None.

sectionZMax() - Method in interface nxopen.features.shipdesign.ShipSectionBuilder

Returns the section zmax
License requirements: None.

sectionZMin() - Method in interface nxopen.features.shipdesign.ShipSectionBuilder

Returns the section zmin
License requirements: None.

sectorIndex() - Method in interface nxopen.cae.CyclicSymmetricParameters

Returns the selected index
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

sectorValue() - Method in interface nxopen.cae.CyclicSymmetricParameters

Returns the sector value enum
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

securityLogging() - Method in interface nxopen.pdm.SessionSettings

Returns a flag controlling Teamcenter security logging.

secXorigin() - Method in interface nxopen.cam.InspectionAlignmentBuilder

Returns the sec xorigin
License requirements: None.

secYorigin() - Method in interface nxopen.cam.InspectionAlignmentBuilder

Returns the sec yorigin
License requirements: None.

secZorigin() - Method in interface nxopen.cam.InspectionAlignmentBuilder

Returns the sec zorigin
License requirements: None.

seeAlso - Variable in class nxopen.RuleManager.FunctionInformation

Other related functions, comma-separated list

SEEBECK_COEFFICIENT - Static variable in class nxopen.cae.Result.Quantity

seed - Variable in class nxopen.ApparentChainingRule.Data

The seed curve.

SEED - Static variable in class nxopen.uf.UFSurfReg.Type

SEED_CURVE - Static variable in class nxopen.cae.LaminateDrapingDataBuilder.DrapingPathType

seed curve

SEED_ELEMENT - Static variable in class nxopen.cae.ElementSplitBuilder.SplitMethodType

by vector comparison

SEED_MESH - Static variable in class nxopen.cae.modelcheck.AlignShellElementNormalBuilder.ConnectedElementScope

Limits check to only those shell elements in the mesh that contains the Seed Element

SEED_POINT - Static variable in class nxopen.cae.Post.StreamlineSynchronization

SeedAndPointData() - Constructor for class nxopen.FaceMergedRibFacesRule.SeedAndPointData

seedCurve - Variable in class nxopen.CurveChainRule.Data

Seed curve

seedCurve - Variable in class nxopen.CurveFeatureChainRule.Data

Seed curve

seedCurve - Variable in class nxopen.CurveFeatureTangentRule.Data

Seed curve

seedCurve - Variable in class nxopen.CurveTangentRule.Data

Seed curve

seedDlxFile() - Method in interface nxopen.blockstyler.SetList

Returns the SeedDlxFile as string
License requirements: None.

seededges - Variable in class nxopen.cae.EdgePathMethod.SeedEdgesData

seed edges

seededges - Variable in class nxopen.cae.EdgePathMethod.SeedsData

seed edges

seedEdges - Variable in class nxopen.EdgeMultipleSeedTangentRule.Data

Seed edges

SeedEdgesData() - Constructor for class nxopen.cae.EdgePathMethod.SeedEdgesData

SeedEdgesData() - Constructor for class nxopen.cae.ElemEdgePathMethod.SeedEdgesData

seedelemedges - Variable in class nxopen.cae.ElemEdgePathMethod.SeedEdgesData

seed element edges

seedelemedges - Variable in class nxopen.cae.ElemEdgePathMethod.SeedsData

seed element edges

seedElement() - Method in interface nxopen.cae.GroupByBoundaryBuilder

Returns the seed element
License requirements: None.

seedElement() - Method in interface nxopen.cae.modelcheck.AlignShellElementNormalBuilder

Returns the seed element
License requirements: None.

seedFace() - Method in interface nxopen.cam.GeometrySet

Returns the seed face
License requirements: None.

seedFace() - Method in interface nxopen.cam.SurfaceRegions

Returns the seed face
License requirements: None.

seedFace - Variable in class nxopen.FaceConnectedBlendRule.DefiningData

Seed face which creates this rule

seedFace() - Method in interface nxopen.features.ExtractFaceBuilder

Returns the seed face for the face chain
License requirements: None.

seedFace() - Method in interface nxopen.features.PatchBuilder

Returns the seed face.

seedFace() - Method in interface nxopen.tooling.FormingInsertBuilder

Returns the seed face of forming region.

seedFace - Variable in class nxopen.uf.UFSf.AskIdealizeRegionData

seedFace1() - Method in interface nxopen.weld.FilletBuilder

Returns the first seed face.

seedFace1() - Method in interface nxopen.weld.PlugSlotBuilder

Returns the top face on face1
License requirements: None.

seedFace1() - Method in interface nxopen.weld.WeldGrooveBuilder

Returns the first seed face
License requirements: ugweld ("UG WELD")
.

seedFace2() - Method in interface nxopen.weld.FilletBuilder

Returns the second seed face.

seedFace2() - Method in interface nxopen.weld.PlugSlotBuilder

Returns the bottom face from which the weld will be extruded towards the top
License requirements: None.

seedFace2() - Method in interface nxopen.weld.WeldGrooveBuilder

Returns the second seed face
License requirements: ugweld ("UG WELD")
.

seedFaces - Variable in class nxopen.uf.UFModl.DfoRegion

seedFaces - Variable in class nxopen.uf.UFWave.AskLinkRegionSourcesData

seedMesh - Variable in class nxopen.uf.UFSf.AskMeshMatingConditionData

seedObj - Variable in class nxopen.FaceRegionBoundaryRule.Data

Seed Face

seedObj - Variable in class nxopen.RegionBoundaryRule.Data

Face or Sketch

seedOnlyToggle() - Method in interface nxopen.geometricutilities.PatternDefinition

Returns the seedOnlyToggle, a logical flag to indicate if the we need only instances for the seed along the second direction.

seedPoint - Variable in class nxopen.FaceRegionBoundaryRule.Data

Seed point

seedPoint - Variable in class nxopen.RegionBoundaryRule.Data

Seed point

seedPoint1() - Method in interface nxopen.weld.FilletBuilder

Returns the point on the first face.

seedPoint1() - Method in interface nxopen.weld.WeldGrooveBuilder

Returns the point on the first face
License requirements: ugweld ("UG WELD")
.

seedPoint2() - Method in interface nxopen.weld.FilletBuilder

Returns the point on the second face.

seedPoint2() - Method in interface nxopen.weld.WeldGrooveBuilder

Returns the point on the second face
License requirements: ugweld ("UG WELD")
.

seedPointInfo(double[], double[]) - Method in interface nxopen.tooling.DieDesignTrimPostBuilder

Sets seed point information.

seedpt - Variable in class nxopen.FaceMergedRibFacesRule.SeedAndPointData

Seed pick point point.

seedReverseDirection() - Method in interface nxopen.features.ExtractFaceBuilder

Returns the option that specifies whether to reverse the face normals of the extracted faces relative to the seed face chain
License requirements: None.

SeedsData() - Constructor for class nxopen.cae.EdgePathMethod.SeedsData

SeedsData() - Constructor for class nxopen.cae.ElemEdgePathMethod.SeedsData

seedSelection() - Method in interface nxopen.cae.LaminateDrapingDataBuilder

Returns the selected seed curves.

seedstartnodes - Variable in class nxopen.cae.ElemEdgePathMethod.SeedEdgesData

seed start vertices

seedstartnodes - Variable in class nxopen.cae.ElemEdgePathMethod.SeedsData

seed start vertices

seedstartvertices - Variable in class nxopen.cae.EdgePathMethod.SeedEdgesData

seed start vertices

seedstartvertices - Variable in class nxopen.cae.EdgePathMethod.SeedsData

seed start vertices

seedWireframe - Variable in class nxopen.FollowFilletRule.Data

Seed wireframe

seeThru() - Method in interface nxopen.preferences.SessionVisualizationShade

Deprecated.

Deprecated in NX8.5.0. See SessionVisualizationEmphasis .

seeThruAll() - Method in interface nxopen.preferences.SessionVisualizationEmphasis

Returns the setting that controls whether or not all less important objects are de-emphasized.

seeThruDeEmphasizedObjects() - Method in interface nxopen.preferences.SessionVisualizationEmphasis

Returns the setting that controls whether or not See-Thru is applied to de-emphasized objects.

seeThruDeEmphasizedObjects() - Method in interface nxopen.preferences.SessionVisualizationShade

Deprecated.

Deprecated in NX8.5.0. Use SessionVisualizationEmphasis.seeThruDeEmphasizedObjects() instead.

SeeThruOptions() - Constructor for class nxopen.preferences.SessionVisualizationShade.SeeThruOptions

Deprecated.

SeeThruOptions(SessionVisualizationShade.Rgb, SessionVisualizationShade.SeeThruEdgesType, SessionVisualizationShade.Rgb, int, SessionVisualizationShade.SeeThruEdgesType, SessionVisualizationShade.Rgb, int, SessionVisualizationShade.Rgb, SessionVisualizationShade.SeeThruEdgesType, SessionVisualizationShade.Rgb, int) - Constructor for class nxopen.preferences.SessionVisualizationShade.SeeThruOptions

Deprecated.

Constructor for the SeeThruOptions object.

seeThruPreview() - Method in interface nxopen.preferences.SessionVisualizationEmphasis

Returns the setting that controls whether or not all less important objects are de-emphasized related to the Model Preview.

seeThruSection() - Method in interface nxopen.preferences.SessionVisualizationEmphasis

Returns the setting that controls whether or not geometry on the section plane is emphasized.

seeThruSection() - Method in interface nxopen.preferences.SessionVisualizationShade

Deprecated.

Deprecated in NX8.5.0. Use SessionVisualizationEmphasis.seeThruSection() instead.

seeThruStyle() - Method in interface nxopen.preferences.PartVisualizationEmphasis

Returns the See-Thru style that determines how translucency and color are used to de-emphasize shaded geometry.

seeThruStyle() - Method in interface nxopen.preferences.SessionVisualizationShade

Deprecated.

Deprecated in NX8.5.0. Use PartVisualizationEmphasis.seeThruStyle() instead.

seeThruStyleOptions() - Method in interface nxopen.preferences.SessionVisualizationShade

Deprecated.

Deprecated in NX8.5.0. See PartVisualizationEmphasis .

seg - Variable in class nxopen.uf.UFRoute.CreateBendByRadiusData

seg - Variable in class nxopen.uf.UFRoute.CreateBendByRatioData

seg - Variable in class nxopen.uf.UFRoute.CreateBendByTableData

segDirection() - Method in interface nxopen.die.SteelInsertSegmentChildBuilder

Returns the steel insert seg directions
License requirements: ug_die_design ("Die Design")
.

SEGMENT - Static variable in class nxopen.features.PolylineBuilder.MovementMethodType

Movement along a segment of the polyline

SEGMENT - Static variable in class nxopen.formboard.UpdateDiscrepancy.ObjectType

Routing Segment.

segment() - Method in interface nxopen.mechanicalrouting.EditPointBuilder

Returns the segment setting.

Segment - Interface in nxopen.motion

Represents a segment, only creation is supported
This is created by road.

segment() - Method in interface nxopen.routing.RouteSegmentFont

Returns
License requirements: routing_base ("Routing Basic")
.

segment - Variable in class nxopen.routing.SBendCorner.SBendData

S-Bend segment

segment() - Method in interface nxopen.routing.SubdivideSegmentBuilder

Returns the segment to subdivide
License requirements: routing_base ("Routing Basic")
.

segmentationOption() - Method in interface nxopen.features.AestheticFaceBlendBuilder

Returns the segmentation option
License requirements: None.

segmentBlendFaces() - Method in interface nxopen.features.EdgeBlendBuilder

Returns the Segment blend to match face segments option
License requirements: None.

SegmentBuilder - Interface in nxopen.motion

Represents a SegmentBuilder , only creation is supported
To create a new instance of this class, use RoadBuilder.createSegmentBuilder()

Created in NX11.0.0

SegmentBuilder.StraightTransitionTypeChoices - Class in nxopen.motion

data type attribute of the straight data

SegmentBuilder.TypeChoices - Class in nxopen.motion

type attribute of the segment

segmentBuilderList() - Method in interface nxopen.motion.RoadBuilder

Returns the segment builder list for the road object of type path
License requirements: mechanisms ("MECHANISMS")
.

SegmentBuilderList - Interface in nxopen.motion

Represents a list of objects.

SegmentCollection - Interface in nxopen.motion

Represents a collection of Segment objects, only creation is supported
To obtain an instance of this class, refer to Road

Created in NX11.0.0

segmentCollector() - Method in interface nxopen.mechanicalrouting.InsulationBuilder

Returns the routing object collector to collect the segments to assign Insulation to.

segmentCollector() - Method in interface nxopen.mechanicalrouting.StockBuilder

Returns the routing object collector that collects segments to assign stock to.

segmentCollector() - Method in interface nxopen.routing.OverstockBuilder

Returns the routing object collector to collect the segments to assign overstock to.

segmentCollector() - Method in interface nxopen.routing.SimplifyPathBuilder

Returns the routing object collector that collects the segments to simplify.

segmentCollector() - Method in interface nxopen.routing.SpaceReservationBuilder

Returns the routing segment collector
License requirements: routing_base ("Routing Basic")
.

segmentCollector() - Method in interface nxopen.routing.StockBuilder

Returns the routing object collector that collects segments to assign stock to.

segmentCollector() - Method in interface nxopen.routing.StockTransitionBuilder

Returns the segment collector
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

SegmentConstraintsData() - Constructor for class nxopen.AutomaticTraceline.SegmentConstraintsData

segmentEdges() - Method in interface nxopen.features.GuidedExtensionBuilderEx

Returns the list of segment edges that represent a segment
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

segmentEdges() - Method in interface nxopen.tooling.GuidedExtensionBuilder

Returns the list of segment edges that represent a segment
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING")
.

segmentIndices - Variable in class nxopen.AutomaticTraceline.SegmentConstraintsData

Segment indices

segmentLength() - Method in interface nxopen.mechanicalrouting.EditPointBuilder

Returns the segment length setting.

segmentLength() - Method in interface nxopen.weld.FilletBuilder

Returns the linear dimension length indicates segment length for each weld.

segmentLength() - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. Use WeldGrooveBuilder.segmentLength() instead.

segmentLength() - Method in interface nxopen.weld.WeldGrooveBuilder

Returns the length of weld
License requirements: ugweld ("UG WELD")
.

segmentLengthIncrement() - Method in interface nxopen.formboard.LayoutLengthOptions

Returns the segment length increment.

segmentLengths - Variable in class nxopen.AutomaticTraceline.SegmentConstraintsData

Segment lengths

segmentList() - Method in interface nxopen.die.DrawBeadBuilder

Returns the list of DrawBeadSegmentBuilder defining the bead sections along the centerline.

segmentList() - Method in interface nxopen.features.sheetmetal.FlexibleCableBuilder

Returns the cable segment list.

segmentLocation() - Method in interface nxopen.drawings.SectionLineSegmentsBuilder

Returns the segment location
License requirements: None.

segmentLocationForSecondLeg() - Method in interface nxopen.drawings.SectionLineSegmentsBuilder

Returns the segment location to add segments to revolved section line second leg
License requirements: None.

segmentManager() - Method in interface nxopen.Part

Returns the SegmentManager for this part .

SegmentManager - Interface in nxopen.routing

Contains the type of the routing part as well as the Collection objects for creating/iterating over routing objects.

SegmentManager.SubdivideOption - Class in nxopen.routing

Contains subdivide segment method information.

SegmentManager.SubdivideSpacing - Class in nxopen.routing

Specifies spacing option for subdivide segment.

segmentName - Variable in class nxopen.mechatronics.CamProfileBuilder.Element

segment name

segmentNumber - Variable in class nxopen.uf.UFDrf.SymbolInstance

segmentPair() - Method in interface nxopen.routing.AssignDiscontinuityBuilder

Returns the segment pairs selected for the assigning Discontinuity
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

segmentPairBuilder() - Method in interface nxopen.routing.AssignDiscontinuityBuilder

Creates a SegmentPairBuilder used to create list item for AssignDiscontinuity
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

SegmentPairBuilder - Interface in nxopen.routing

The builder for creating the list item of SegmentPairs
To create a new instance of this class, use AssignDiscontinuityBuilder.segmentPairBuilder()

Created in NX7.5.0

segmentPnts - Variable in class nxopen.uf.UFDrf.DraftAidLine

segmentRoundingMethod() - Method in interface nxopen.formboard.LayoutLengthOptions

Returns the rounding method to apply to segment lengths.

segments() - Method in interface nxopen.cam.MillFormToolBuilder

Returns the Segments
License requirements: None.

segments() - Method in interface nxopen.features.FitCurveBuilder

Returns the segments
License requirements: None.

segments() - Method in interface nxopen.features.RapidSurfaceBuilder

Returns the segments
License requirements: studio_free_form ("STUDIO FREE FORM")
.

SEGMENTS - Static variable in class nxopen.geometricutilities.AlignmentMethodBuilder.Type

segments() - Method in interface nxopen.geometricutilities.CurveFitData

Returns the fitting segments
License requirements: None.

segments() - Method in interface nxopen.motion.Road

Returns the Motion.SegmentCollection belonging to this road element
Created in NX11.0.0

SEGMENTS - Static variable in class nxopen.motion.RoadBuilder.PathDatatypeChoices

Segments

segments() - Method in interface nxopen.routing.SegmentManager

All Segment types collection .

segments - Variable in class nxopen.uf.UFCurve.CreateSimplifiedCurveData

segments - Variable in class nxopen.uf.UFDraw.AskSimplifiedCurveData

segments - Variable in class nxopen.uf.UFDraw.CreateSimplifiedCurveData

segments - Variable in class nxopen.uf.UFRoute.AskRcpSegmentsData

segments - Variable in class nxopen.uf.UFRoute.AskRcpSegsData

segments - Variable in class nxopen.uf.UFRoute.AskStockSegmentsData

segments - Variable in class nxopen.uf.UFRoute.AskWireSegmentsData

segmentsCount - Variable in class nxopen.uf.UFCurve.CreateSimplifiedCurveData

segmentsOrPatches() - Method in interface nxopen.geometricutilities.DegreesAndSegmentsOrPatchesBuilder

Returns the patches
License requirements: studio_free_form ("STUDIO FREE FORM")
.

segmentsParent() - Method in interface nxopen.die.SteelInsertBuilder

Returns the segments parent builder of the diesteelinsert
License requirements: ug_die_design ("Die Design")
.

segmentType() - Method in interface nxopen.drawings.SectionLineSegmentPointBuilder

Returns the segment type
License requirements: drafting ("DRAFTING")
.

segmentType - Variable in class nxopen.mechatronics.CamProfileBuilder.Element

segment type

segmentType() - Method in interface nxopen.motion.SegmentBuilder

Returns the segment type of a road segment
License requirements: mechanisms ("MECHANISMS")
.

segPairList() - Method in interface nxopen.routing.AssignDiscontinuityBuilder

Returns the list of selected segments pairs
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

segPoint() - Method in interface nxopen.die.SteelInsertSegmentChildBuilder

Returns the steel insert seg point or plane
License requirements: ug_die_design ("Die Design")
.

selBend() - Method in interface nxopen.tooling.DirectUnbendBuilder

Returns the selection of bends.

SELBOW - Static variable in class nxopen.routing.CornerTypeBuilder.Type

selConnector() - Method in interface nxopen.linedesigner.DisconnectConnectionBuilder

Returns the sel connector
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

SELECT - Static variable in class nxopen.blockstyler.Wizard.SubNodeAction

Sub-node has been selected.

SELECT - Static variable in class nxopen.cae.DurabilityEventOverridesBuilder.UseElementsEnum

Select

SELECT - Static variable in class nxopen.cae.LaminateSineEventBuilder.NaturalFrequeciesEnum

Manually select natural frequencies

SELECT - Static variable in class nxopen.geometricutilities.ReduceSurfaceRadiusBuilder.FaceSelectionSpecification

SELECT - Static variable in class nxopen.tooling.BlankGeneratorBuilder.CreateBlankType

Select blank

SELECT_BOX - Static variable in class nxopen.uf.UFDisp.Context

SELECT_CYLINDRICAL - Static variable in class nxopen.cae.Result.CoordinateSystem

SELECT_DIRECTION - Static variable in class nxopen.cam.InspectionUVGridBuilder.SphereAxisType

User specified direction

SELECT_EDGE - Static variable in class nxopen.tooling.WireHoleBuilder.Types

SELECT_EXISTING - Static variable in class nxopen.cam.InspectionConstructedFeatureBuilder.DesignCreationType

Design feature is selected from existing features

SELECT_FACES - Static variable in class nxopen.tooling.TrimMoldComponentsBuilder.TrimSurfaceName

Select faces

SELECT_LOCATION - Static variable in class nxopen.die.DieLocationBuilder.LocationType

Select the point to be used.

SELECT_OBJECT - Static variable in class nxopen.features.TrimCurveBuilder.FirstBoundingObjectOptions

Select object

SELECT_OBJECT - Static variable in class nxopen.features.TrimCurveBuilder.SecondBoundingObjectOptions

Select object

SELECT_ORIGIN - Static variable in class nxopen.mechatronics.ECADImportBuilder.PositionMode

Deprecated.

Select Origin

SELECT_ORIGIN - Static variable in class nxopen.tooling.SIZERImportBuilder.PositionMode

Select Origin

SELECT_POINT - Static variable in class nxopen.features.DivideCurveBuilder.CornerOption

Screen Position

SELECT_POINT - Static variable in class nxopen.features.DivideCurveBuilder.KnotPointOption

Screen Position

SELECT_RECTANGULAR - Static variable in class nxopen.cae.Result.CoordinateSystem

SELECT_SHEET_BODY - Static variable in class nxopen.tooling.TrimMoldComponentsBuilder.TrimSurfaceName

Select sheet body

SELECT_SING - Static variable in class nxopen.uf.UFDisp.Context

SELECT_SPHERICAL - Static variable in class nxopen.cae.Result.CoordinateSystem

SELECT_TEMPLATE - Static variable in class nxopen.pdm.PartOperationCreateBuilder.OperationSubType

Populate Part already created in Teamcenter

SELECTABLE - Static variable in class nxopen.layer.State

Objects on the layer are selectable

SelectAdapterSignal - Interface in nxopen.mechatronics

Represents a single object selection.

SelectAdapterSignal.ValueData - Class in nxopen.mechatronics

This class holds the data returned from SelectAdapterSignal.getValue()

SelectAdapterSignal.ValueWithCaeSetObjectInfoData - Class in nxopen.mechatronics

This class holds the data returned from SelectAdapterSignal.getValue()

SelectAdapterSignal.ValueWithSnapData - Class in nxopen.mechatronics

This class holds the data returned from SelectAdapterSignal.getValue()

selectAdjacentSurface() - Method in interface nxopen.cam.InspectionEdgePointFeatureBuilder

Returns the select adjacent surface
License requirements: None.

selectAll() - Method in interface nxopen.tooling.UnusedFileManagementBuilder

Returns the select all option.

selectAllElements() - Method in interface nxopen.cae.LaminateElementFilterBuilder

Returns the select all elements option
License requirements: nx_lam_composites ("Laminate Composites")
.

selectAllEntities() - Method in interface nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder

This command selects all the entities.

selectAllFields() - Method in interface nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder

This command selects all the fields.

selectAllGouges() - Method in interface nxopen.cam.ToolPathEditorBuilder

Select all gouges
License requirements: cam_base ("CAM BASE")
.

selectAllPlies() - Method in interface nxopen.cae.LaminatePlyFilterBuilder

Returns the select all plies option
License requirements: nx_lam_composites ("Laminate Composites")
.

selectAllProjectFeatureCurves() - Method in interface nxopen.ConvertToFromReferenceBuilder

Returns the projected curve flag.

selectallsubcases - Variable in class nxopen.cae.LaminatePostReportBuilder.SelectedSolutionsData

SelectAnnotation - Interface in nxopen.annotations

Represents a single object selection.

SelectAnnotation.ValueData - Class in nxopen.annotations

This class holds the data returned from SelectAnnotation.getValue()

SelectAnnotation.ValueWithCaeSetObjectInfoData - Class in nxopen.annotations

This class holds the data returned from SelectAnnotation.getValue()

SelectAnnotation.ValueWithSnapData - Class in nxopen.annotations

This class holds the data returned from SelectAnnotation.getValue()

SelectAnnotationList - Interface in nxopen.annotations

Represents a list of objects on a selection list.

selectArc() - Method in interface nxopen.cam.InspectionArcFeatureBuilder

Returns the selected Arc
License requirements: None.

selectAssemblyInFolder() - Method in interface nxopen.tooling.RenameAndExportComponentBuilder

Returns the select assembly in folder
License requirements: None.

selectAssemblyToExport() - Method in interface nxopen.tooling.RenameAndExportComponentBuilder

Returns the select assembly to export
License requirements: None.

selectAssociationInsert() - Method in interface nxopen.tooling.PiercingInsertBuilder

Returns the selection of the inserts to create association.

selectAssociationInsert() - Method in interface nxopen.tooling.PiercingInsertMiniToolsBuilder

Returns the selection of the inserts to create association.

selectAssociationScrap() - Method in interface nxopen.tooling.PiercingInsertBuilder

Returns the selection of the scrap to create association.

selectAssociationScrap() - Method in interface nxopen.tooling.PiercingInsertMiniToolsBuilder

Returns the selection of the scrap to create association.

selectAttributeSpreadsheet() - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder

Returns the selected attribute spreadsheet
License requirements: None.

selectAxisControl() - Method in interface nxopen.mechatronics.GraphControlBuilder

Returns the select axis control.

SelectBaseCustomSymbolList - Interface in nxopen.annotations

Represents a list of objects on a selection list.

selectBaseFace() - Method in interface nxopen.features.sheetmetal.CleanUpUtilityBuilder

Returns the select base face for clean-up utility
License requirements: None.

selectBend() - Method in interface nxopen.features.sheetmetal.EditBendBuilder

Returns the select bend
License requirements: None.

selectBend() - Method in interface nxopen.tooling.DirectUnfoldBuilder

Returns the selection list that stores bend faces.

selectBlank() - Method in interface nxopen.tooling.BlankGeneratorBuilder

Create a blank by selecting a blank.

SelectBlend - Interface in nxopen.modldirect

Represents a SelectBlend Allows user to specify blend faces.

selectBlock(String, String, boolean) - Method in interface nxopen.annotations.ImportAutocadBlockBuilder

Selects or deselects a block.

selectBodies() - Method in interface nxopen.die.DieBooleanBuilder

Returns the bodies to be booleaned to the main feature body
License requirements: None.

selectBodies() - Method in interface nxopen.tooling.CopySolidBuilder

Returns the solid bodies selected by user
License requirements: None.

selectBody() - Method in interface nxopen.cae.PolygonFaceOnMeshBuilder

Returns the selected body
License requirements: nx_masterfem ("Finite Element Modeling")
.

SelectBody - Interface in nxopen

Represents a single object selection.

selectBody() - Method in interface nxopen.tooling.MoldInsertBuilder

Returns the select body
License requirements: None.

selectBody() - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder

Returns the select body
License requirements: None.

selectBody() - Method in interface nxopen.tooling.ProfileSplitBuilder

Returns the selected body to be splitted
License requirements: None.

selectBody() - Method in interface nxopen.tooling.StockSizeBuilder

Returns the selected body to calculate a bounding box for stock size.

selectBody() - Method in interface nxopen.weld.UserDefinedWeldBuilder

Returns the select body.

SelectBody.ValueData - Class in nxopen

This class holds the data returned from SelectBody.getValue()

SelectBody.ValueWithCaeSetObjectInfoData - Class in nxopen

This class holds the data returned from SelectBody.getValue()

SelectBody.ValueWithSnapData - Class in nxopen

This class holds the data returned from SelectBody.getValue()

selectBodyAccordingToAttribute() - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder

Returns the select body according to attribute
License requirements: None.

SelectBodyList - Interface in nxopen

Represents a list of objects on a selection list.

selectBodyOption() - Method in interface nxopen.cae.PolygonFaceOnMeshBuilder

Returns the select body option for different ways of body select method
License requirements: None.

selectBotFace() - Method in interface nxopen.tooling.SubInsertBuilder

Returns the bottom face to position the sub-insert
License requirements: None.

selectBottomParts() - Method in interface nxopen.weld.WeldBeadBuilder

Returns the collector containing the secondary bodies the bead is attached to.

selectBoundaryEdge1() - Method in interface nxopen.features.StepBuilder

Returns the selected boundary edge 1
License requirements: None.

selectBoundaryEdge2() - Method in interface nxopen.features.StepBuilder

Returns the selected boundary edge2
License requirements: None.

selectBoundaryEdges() - Method in interface nxopen.tooling.MWSearchRegionBuilder

Returns the select boundary edges
License requirements: None.

selectBoundaryFace1() - Method in interface nxopen.features.StepBuilder

Returns the selected boundary face 1
License requirements: None.

selectBoundaryFace2() - Method in interface nxopen.features.StepBuilder

Returns the selected boundary face 2
License requirements: None.

selectBoundaryFaces() - Method in interface nxopen.tooling.MWSearchRegionBuilder

Returns the select boundary faces
License requirements: None.

selectBoundaryPlane1() - Method in interface nxopen.features.StepBuilder

Returns the selected boundary plane 1
License requirements: None.

selectBoundaryPlane2() - Method in interface nxopen.features.StepBuilder

Returns the selected boundary plane 2
License requirements: None.

selectBoundarySection1() - Method in interface nxopen.features.StepBuilder

Returns the selected boundary section 1
License requirements: None.

selectBoundarySection2() - Method in interface nxopen.features.StepBuilder

Returns the selected boundary section2
License requirements: None.

selectBoundBox() - Method in interface nxopen.tooling.TrimSolidBuilder

Returns the selected bounding box.

selectBranch() - Method in interface nxopen.formboard.OrientBranchBuilder

Returns the user selected branch ISegment for rotation.

SelectCAEBody - Interface in nxopen.cae

Represents a single object selection.

SelectCAEBody.ValueData - Class in nxopen.cae

This class holds the data returned from SelectCAEBody.getValue()

SelectCAEBody.ValueWithCaeSetObjectInfoData - Class in nxopen.cae

This class holds the data returned from SelectCAEBody.getValue()

SelectCAEBody.ValueWithSnapData - Class in nxopen.cae

This class holds the data returned from SelectCAEBody.getValue()

SelectCAEBodyList - Interface in nxopen.cae

Represents a list of objects on a selection list.

SelectCAEEdge - Interface in nxopen.cae

Represents a single object selection.

SelectCAEEdge.ValueData - Class in nxopen.cae

This class holds the data returned from SelectCAEEdge.getValue()

SelectCAEEdge.ValueWithCaeSetObjectInfoData - Class in nxopen.cae

This class holds the data returned from SelectCAEEdge.getValue()

SelectCAEEdge.ValueWithSnapData - Class in nxopen.cae

This class holds the data returned from SelectCAEEdge.getValue()

SelectCAEEdgeList - Interface in nxopen.cae

Represents a list of objects on a selection list.

SelectCAEFace - Interface in nxopen.cae

Represents a single object selection.

SelectCAEFace.ValueData - Class in nxopen.cae

This class holds the data returned from SelectCAEFace.getValue()

SelectCAEFace.ValueWithCaeSetObjectInfoData - Class in nxopen.cae

This class holds the data returned from SelectCAEFace.getValue()

SelectCAEFace.ValueWithSnapData - Class in nxopen.cae

This class holds the data returned from SelectCAEFace.getValue()

SelectCAEFaceList - Interface in nxopen.cae

Represents a list of objects on a selection list.

selectCageObject() - Method in interface nxopen.features.subdivision.SubdivisionDeleteCageBuilder

Deprecated.

Deprecated in NX11.0.0. Use SubdivisionDeleteObjectBuilder instead.

SelectCageObjectData - Interface in nxopen.features.subdivision

Represents subdivision cage topology object selection.

selectCallout() - Method in interface nxopen.annotations.CalloutGroupBuilder

Returns the selected callout
License requirements: None.

selectCamDirection() - Method in interface nxopen.tooling.DieEngTrimTaskBuilder

Returns the selected cam direction.

SelectCAMFeature - Interface in nxopen.cam

Represents a single object selection.

SelectCAMFeature.ValueData - Class in nxopen.cam

This class holds the data returned from SelectCAMFeature.getValue()

SelectCAMFeature.ValueWithCaeSetObjectInfoData - Class in nxopen.cam

This class holds the data returned from SelectCAMFeature.getValue()

SelectCAMFeature.ValueWithSnapData - Class in nxopen.cam

This class holds the data returned from SelectCAMFeature.getValue()

SelectCAMFeatureList - Interface in nxopen.cam

Represents a list of objects on a selection list.

SelectCartesianCoordinateSystem - Interface in nxopen

Represents a single object selection.

SelectCartesianCoordinateSystem.ValueData - Class in nxopen

This class holds the data returned from SelectCartesianCoordinateSystem.getValue()

SelectCartesianCoordinateSystem.ValueWithCaeSetObjectInfoData - Class in nxopen

This class holds the data returned from SelectCartesianCoordinateSystem.getValue()

SelectCartesianCoordinateSystem.ValueWithSnapData - Class in nxopen

This class holds the data returned from SelectCartesianCoordinateSystem.getValue()

selectCavity() - Method in interface nxopen.tooling.LayoutBuilder

Returns the select cavity
License requirements: None.

selectChain() - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusBuilder

Returns the selected entities for performing the radius reduction operation, which selected by "Select Faces by Chain" and "Single Selection"
License requirements: None.

SelectClassificationBuilder - Interface in nxopen.mechatronics

Select a classification from the reuse library.

SelectCollisionSensor - Interface in nxopen.mechatronics

Represents a single object selection.

SelectCollisionSensor.ValueData - Class in nxopen.mechatronics

This class holds the data returned from SelectCollisionSensor.getValue()

SelectCollisionSensor.ValueWithCaeSetObjectInfoData - Class in nxopen.mechatronics

This class holds the data returned from SelectCollisionSensor.getValue()

SelectCollisionSensor.ValueWithSnapData - Class in nxopen.mechatronics

This class holds the data returned from SelectCollisionSensor.getValue()

SelectCollisionSensorList - Interface in nxopen.mechatronics

Represents a list of objects on a selection list.

selectColorSpreadsheet() - Method in interface nxopen.tooling.FaceColorManagementBuilder

Returns the face color spreadsheet
License requirements: None.

selectComponent(String) - Method in interface nxopen.annotations.EditSymbolDisplayBuilder

Stores index of the custom symbol component for editing display
License requirements: drafting ("DRAFTING")
.

selectComponent() - Method in interface nxopen.assemblies.RelinkerBuilder

Returns a list of the selected component as relink target scope.

SelectComponent - Interface in nxopen.assemblies

Represents a single object selection.

SelectComponent - Interface in nxopen.layout2d

Represents a single object selection.

selectComponent(String) - Method in interface nxopen.sim.SinumerikCaPlaceholderBuilder

The select placeholder tools component
License requirements: nx_sinumerik_ca ("Sinumerik Collision Avoidance")
.

selectComponent() - Method in interface nxopen.tooling.BackingPadBuilder

Returns the select target component in which to design backing pad
License requirements: None.

selectComponent() - Method in interface nxopen.tooling.BomBuilder

Returns the select component needed to get stocksize
License requirements: None.

selectComponent() - Method in interface nxopen.tooling.ConcurrentDesignManagementBuilder

Returns the selected component to assign to a designer.

selectComponent() - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder

Returns the selected objects
License requirements: None.

selectComponent() - Method in interface nxopen.tooling.SlugRetentionBuilder

Returns the select component
License requirements: None.

SelectComponent.ValueData - Class in nxopen.assemblies

This class holds the data returned from SelectComponent.getValue()

SelectComponent.ValueData - Class in nxopen.layout2d

This class holds the data returned from SelectComponent.getValue()

SelectComponent.ValueWithCaeSetObjectInfoData - Class in nxopen.assemblies

This class holds the data returned from SelectComponent.getValue()

SelectComponent.ValueWithCaeSetObjectInfoData - Class in nxopen.layout2d

This class holds the data returned from SelectComponent.getValue()

SelectComponent.ValueWithSnapData - Class in nxopen.assemblies

This class holds the data returned from SelectComponent.getValue()

SelectComponent.ValueWithSnapData - Class in nxopen.layout2d

This class holds the data returned from SelectComponent.getValue()

selectComponentAccordingToAttribute() - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder

Returns the objects according to attributes
License requirements: None.

SelectComponentList - Interface in nxopen.assemblies

Represents a list of objects on a selection list.

SelectComponentList - Interface in nxopen.layout2d

Represents a list of objects on a selection list.

selectComponents() - Method in interface nxopen.tooling.BomListBuilder

Returns the select component needed to get stocksize
License requirements: None.

selectComponents() - Method in interface nxopen.tooling.ChangeoverManagementBuilder

Returns the selection of components to be added to or removed from a changeover.

selectComponentSource() - Method in interface nxopen.assemblies.RelinkerBuilder

Returns a list of the selected component as relink source scope.

selectComponentToRename() - Method in interface nxopen.tooling.RenameAndExportComponentBuilder

Returns the select component to rename
License requirements: None.

selectConehead(String, int, double[], double[], String[], UFDisp.ConeheadAttrbSTag[], double, int) - Method in interface nxopen.uf.UFUi

Refer to UF_UI_select_conehead for documentation.

SelectConeheadData() - Constructor for class nxopen.uf.UFUi.SelectConeheadData

selectConnectParts() - Method in interface nxopen.weld.UserDefinedWeldBuilder

Returns the select connect parts.

selectControlPoint() - Method in interface nxopen.routing.CopeCornerBuilder

Deprecated.

Deprecated in NX8.0.0. Use AssignCornerBuilder instead.

SelectControlPoint - Interface in nxopen.routing

Represents a single object selection.

SelectControlPoint.ValueData - Class in nxopen.routing

This class holds the data returned from SelectControlPoint.getValue()

SelectControlPoint.ValueWithCaeSetObjectInfoData - Class in nxopen.routing

This class holds the data returned from SelectControlPoint.getValue()

SelectControlPoint.ValueWithSnapData - Class in nxopen.routing

This class holds the data returned from SelectControlPoint.getValue()

SelectControlPort - Interface in nxopen.motion

Represents a single object selection.

SelectControlPort.ValueData - Class in nxopen.motion

This class holds the data returned from SelectControlPort.getValue()

SelectControlPort.ValueWithCaeSetObjectInfoData - Class in nxopen.motion

This class holds the data returned from SelectControlPort.getValue()

SelectControlPort.ValueWithSnapData - Class in nxopen.motion

This class holds the data returned from SelectControlPort.getValue()

SelectCoordinateSystem - Interface in nxopen

Represents a single object selection.

SelectCoordinateSystem.ValueData - Class in nxopen

This class holds the data returned from SelectCoordinateSystem.getValue()

SelectCoordinateSystem.ValueWithCaeSetObjectInfoData - Class in nxopen

This class holds the data returned from SelectCoordinateSystem.getValue()

SelectCoordinateSystem.ValueWithSnapData - Class in nxopen

This class holds the data returned from SelectCoordinateSystem.getValue()

SelectCoordinateSystemList - Interface in nxopen

Represents a list of objects on a selection list.

selectCopeStock() - Method in interface nxopen.routing.AssignCornerBuilder

Returns the user selected correct object where correct object is Stock and ISegment .

selectCopeStock() - Method in interface nxopen.routing.CopeCornerBuilder

Deprecated.

Deprecated in NX8.0.0. Use AssignCornerBuilder instead.

selectCorner() - Method in interface nxopen.tooling.CornerDesignBuilder

Returns the selected corner.

selectCsys() - Method in interface nxopen.features.shipdesign.ProfileBuilder

Returns the select csys
License requirements: None.

selectCSYSFace() - Method in interface nxopen.features.shipdesign.Cutout2Builder

Returns the select csysface (only used for: SpecifyCSYS)
License requirements: None.

selectCSYSFace() - Method in interface nxopen.features.shipdesign.ShipCutoutBuilder

Returns the selection object for the target face.

selectCSYSFace() - Method in interface nxopen.features.shipdesign.ShipEndCutBuilder

Returns the select csysface
License requirements: None.

selectCSYSFace() - Method in interface nxopen.features.shipdesign.WeldCutBuilder

Returns the selection object for the target face.

selectCurve() - Method in interface nxopen.geometricanalysis.CurveContinuityBuilder

Returns the select curve
License requirements: None.

SelectCurve - Interface in nxopen

Represents a single object selection.

selectCurve() - Method in interface nxopen.tooling.BackingPadBuilder

Returns the select curve
License requirements: None.

selectCurve() - Method in interface nxopen.tooling.FaceColorManagementBuilder

Returns the select curve
License requirements: None.

SelectCurve.ValueData - Class in nxopen

This class holds the data returned from SelectCurve.getValue()

SelectCurve.ValueWithCaeSetObjectInfoData - Class in nxopen

This class holds the data returned from SelectCurve.getValue()

SelectCurve.ValueWithSnapData - Class in nxopen

This class holds the data returned from SelectCurve.getValue()

SelectCurveList - Interface in nxopen

Represents a list of objects on a selection list.

selectCurves(NXObject[]) - Method in interface nxopen.features.CurveFinderBuilder

Adds curves to collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

selectCurves() - Method in interface nxopen.geometricutilities.CurveShapingBuilder

Returns the curve selection for point insertion
License requirements: studio_free_form ("STUDIO FREE FORM")
.

selectCurves() - Method in interface nxopen.tooling.SpecialFormingBuilder

Returns the select curves
License requirements: None.

selectCurves() - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder

Returns the select curves
License requirements: None.

selectCutCurves() - Method in interface nxopen.FlatteningBuilder

Deprecated.

Deprecated in NX11.0.0. Use FlatteningAndFormingBuilder instead.

selectCylindricalFace() - Method in interface nxopen.annotations.RegionBuilder

Returns the select cylindrical face Only available when region type is RegionBuilder.Types.CYLINDRICAL_REGION
License requirements: None.

selectDataFile() - Method in interface nxopen.tooling.SlugRetentionBuilder

Returns the select data file
License requirements: None.

selectDatasetsName() - Method in interface nxopen.tooling.ValidCheckBuilder

Returns the box list selected sets name
License requirements: None.

SelectDatumCsysList - Interface in nxopen.features

Represents a list of objects on a selection list.

SelectDatumPin - Interface in nxopen.weld

Represents a single object selection.

SelectDatumPin.ValueData - Class in nxopen.weld

This class holds the data returned from SelectDatumPin.getValue()

SelectDatumPin.ValueWithCaeSetObjectInfoData - Class in nxopen.weld

This class holds the data returned from SelectDatumPin.getValue()

SelectDatumPin.ValueWithSnapData - Class in nxopen.weld

This class holds the data returned from SelectDatumPin.getValue()

SelectDatumPlane - Interface in nxopen

Represents a single object selection.

SelectDatumPlane.ValueData - Class in nxopen

This class holds the data returned from SelectDatumPlane.getValue()

SelectDatumPlane.ValueWithCaeSetObjectInfoData - Class in nxopen

This class holds the data returned from SelectDatumPlane.getValue()

SelectDatumPlane.ValueWithSnapData - Class in nxopen

This class holds the data returned from SelectDatumPlane.getValue()

SelectDatumPlaneList - Interface in nxopen

Represents a list of objects on a selection list.

SelectDatumSurface - Interface in nxopen.weld

Represents a single object selection.

SelectDatumSurface.ValueData - Class in nxopen.weld

This class holds the data returned from SelectDatumSurface.getValue()

SelectDatumSurface.ValueWithCaeSetObjectInfoData - Class in nxopen.weld

This class holds the data returned from SelectDatumSurface.getValue()

SelectDatumSurface.ValueWithSnapData - Class in nxopen.weld

This class holds the data returned from SelectDatumSurface.getValue()

selectDevice(ListingWindow.DeviceType, String) - Method in interface nxopen.ListingWindow

Changes where the listing window output is sent.

selectDieInsertForCavity() - Method in interface nxopen.tooling.PiercingInsertBuilder

Returns the select die insert for cavity.

selectDieInsertOutline() - Method in interface nxopen.tooling.DieInsertBuilder

Returns the select die insert outline
License requirements: None.

selectDieInsertOutline() - Method in interface nxopen.tooling.PiercingInsertBuilder

Returns the select die insert outline.

selectDieTip() - Method in interface nxopen.tooling.DieEngTrimTaskBuilder

Returns the selected die tip.

SelectDimension - Interface in nxopen.annotations

Represents a single object selection.

SelectDimension.ValueData - Class in nxopen.annotations

This class holds the data returned from SelectDimension.getValue()

SelectDimension.ValueWithCaeSetObjectInfoData - Class in nxopen.annotations

This class holds the data returned from SelectDimension.getValue()

SelectDimension.ValueWithSnapData - Class in nxopen.annotations

This class holds the data returned from SelectDimension.getValue()

SelectDisplayableObject - Interface in nxopen

Represents a single object selection.

SelectDisplayableObject.ValueData - Class in nxopen

This class holds the data returned from SelectDisplayableObject.getValue()

SelectDisplayableObject.ValueWithCaeSetObjectInfoData - Class in nxopen

This class holds the data returned from SelectDisplayableObject.getValue()

SelectDisplayableObject.ValueWithSnapData - Class in nxopen

This class holds the data returned from SelectDisplayableObject.getValue()

SelectDisplayableObjectList - Interface in nxopen

Represents a list of objects on a selection list.

selectDividingObject() - Method in interface nxopen.features.DividefaceBuilder

Returns the Select Dividing Objects
License requirements: None.

SelectDividingObjectBuilder - Interface in nxopen.geometricutilities

Represents the dividing tool block for dividing face .

SelectDividingObjectBuilder.IsoparametricDirectionType - Class in nxopen.geometricutilities

Represents the direction of isoparametric curve

SelectDividingObjectBuilder.ToolType - Class in nxopen.geometricutilities

Represents the Dividing Tool types

selectDraftingSheet() - Method in interface nxopen.drawings.ConvertDraftingContentsBuilder

Returns the select drafting sheet block
License requirements: None.

selectDraftingView() - Method in interface nxopen.drawings.ConvertDraftingContentsBuilder

Returns the select drafting view block
License requirements: None.

SelectDraftingView - Interface in nxopen.drawings

Represents a single object selection.

SelectDraftingView.ValueData - Class in nxopen.drawings

This class holds the data returned from SelectDraftingView.getValue()

SelectDraftingView.ValueWithCaeSetObjectInfoData - Class in nxopen.drawings

This class holds the data returned from SelectDraftingView.getValue()

SelectDraftingView.ValueWithSnapData - Class in nxopen.drawings

This class holds the data returned from SelectDraftingView.getValue()

SelectDraftingViewList - Interface in nxopen.drawings

Represents a list of objects on a selection list.

SelectDrawingRegion - Interface in nxopen.drawings

Represents a single object selection.

SelectDrawingRegion.ValueData - Class in nxopen.drawings

This class holds the data returned from SelectDrawingRegion.getValue()

SelectDrawingRegion.ValueWithCaeSetObjectInfoData - Class in nxopen.drawings

This class holds the data returned from SelectDrawingRegion.getValue()

SelectDrawingRegion.ValueWithSnapData - Class in nxopen.drawings

This class holds the data returned from SelectDrawingRegion.getValue()

SelectDrawingView - Interface in nxopen.drawings

Represents a single object selection.

SelectDrawingView.ValueData - Class in nxopen.drawings

This class holds the data returned from SelectDrawingView.getValue()

SelectDrawingView.ValueWithCaeSetObjectInfoData - Class in nxopen.drawings

This class holds the data returned from SelectDrawingView.getValue()

SelectDrawingView.ValueWithSnapData - Class in nxopen.drawings

This class holds the data returned from SelectDrawingView.getValue()

SelectDrawingViewList - Interface in nxopen.drawings

Represents a list of objects on a selection list.

SELECTED - Static variable in class nxopen.annotations.PmiFilter.ComponentMethod

Specifies all components will be used

SELECTED - Static variable in class nxopen.cae.optimization.TBSGroupDefinition.DefinitionType

Defines a group by selection

SELECTED - Static variable in class nxopen.cam.FeatureRecognitionBuilder.GeometrySearch

Search for features in user-selected geometry

SELECTED - Static variable in class nxopen.features.SectionCurveBuilder.PlaneType

Planes are selected (not specified by one of the following methods)

SELECTED - Static variable in class nxopen.features.StudioXformBuilderEx.ProportionalPoleControlType

Only selected poles are moved

SELECTED - Static variable in class nxopen.features.subdivision.DefineWorkRegionBuilder.WorkRegionDefinitionMethods

Specify a region as work region

SELECTED - Static variable in class nxopen.features.subdivision.TransformCageData.FallOffMethodType

Selected vertices falloff

SELECTED - Static variable in class nxopen.geometricutilities.PartModuleInputBuilder.ModifiableGeometryOptions

the faces/edges on shared body that are allowed for selection inside part module

SELECTED - Static variable in class nxopen.motion.PackagingInterferenceBuilder.Frame

Interference solids positioned relative to user selected links.

selected - Variable in class nxopen.uf.UFUgmgr.AskVariantConfigurationsForDisplayData

selected - Variable in class nxopen.uf.UFUgmgr.AskVariantConfigurationsForLoadData

selected - Variable in class nxopen.uf.UFUi.DisplayMultiSelectMenuData

selected() - Method in interface nxopen.weld.CharacteristicsBuilder

Returns the selected characteristic value.

SELECTED_AND_CHILDREN - Static variable in class nxopen.annotations.PmiFilter.ComponentMethod

Specifies all components and their children will be used

SELECTED_BLEND - Static variable in class nxopen.features.DeleteFaceBuilder.SetbackOptions

Cap by setback along the selected blend.

SELECTED_BODIES - Static variable in class nxopen.cae.FemCreationOptions.UseBodiesOption

Use selected bodies from the cad part

SELECTED_BODIES - Static variable in class nxopen.cae.FemPart.UseBodiesOption

Use selected bodies from the cad part

SELECTED_CSYS - Static variable in class nxopen.features.ToolingBoxBuilder.RefCsysType

reference the selected csys

SELECTED_CSYS - Static variable in class nxopen.tooling.StockSizeBuilder.RefCsysType

reference the selected csys

SELECTED_CURVES - Static variable in class nxopen.drawings.ViewCopyTo3dBuilder.Types

selected curves

SELECTED_FACES - Static variable in class nxopen.tooling.MWDefineRegionsBuilder.TranslucencyOptionType

Selected region faces

SELECTED_IN_PREVIEW - Static variable in class nxopen.DxfdwgImporter.ConvLayoutsAs

Convert selected layouts

SELECTED_OBJECTS - Static variable in class nxopen.assemblies.ClearanceAnalysisBuilder.CollectionRange

SELECTED_OBJECTS - Static variable in class nxopen.display.PlanarShipGridBuilder.IntersectOption

only the selected objects will be searched for intersections with the plane

SELECTED_OBJECTS - Static variable in class nxopen.ObjectSelector.Scope

Export selected objects from the part

SELECTED_PARTS - Static variable in class nxopen.assemblies.RelinkerBuilder.LinkScope

Indicate relink scope is selected parts

SELECTED_VIEWS - Static variable in class nxopen.drawings.ViewCopyTo3dBuilder.Types

selected views

selectedAlignment() - Method in interface nxopen.drawings.ViewAlignmentBuilder

Returns the selected alignment in builder.

selectedArrangement() - Method in interface nxopen.assemblies.ArrangementsBuilder

Returns the selected arrangement
License requirements: None.

selectedArrangementName() - Method in interface nxopen.tooling.ChangeoverManagementBuilder

Returns the name of the selected changeover arrangement.

selectedBend() - Method in interface nxopen.tooling.BendOperationBuilder

Returns the selection of bends.

SelectedBendData() - Constructor for class nxopen.routing.EditBendAngleBuilder.SelectedBendData

selectedCircle() - Method in interface nxopen.cam.InspectionCircleFeatureBuilder

Returns the selected circle
License requirements: None.

selectedComponentList() - Method in interface nxopen.positioning.ComponentConstraintGroupBuilder

Returns the selected components list
License requirements: assemblies ("ASSEMBLIES MODULE")
.

selectedComponents() - Method in interface nxopen.assemblies.MakeUniquePartBuilder

Returns the selected components to be made unique are returned.

selectedComponents() - Method in interface nxopen.pdm.PartOperationMakeUniqueBuilder

Returns the selected components to be made unique are returned.

selectedCone() - Method in interface nxopen.cam.InspectionConeFeatureBuilder

Returns the selected cone
License requirements: None.

selectedConstraintsList() - Method in interface nxopen.positioning.ComponentConstraintGroupBuilder

Returns the selected constraint list
License requirements: assemblies ("ASSEMBLIES MODULE")
.

SelectedCoordinateSystemData() - Constructor for class nxopen.cae.ClippingParameters.SelectedCoordinateSystemData

SelectedCoordinateSystemData() - Constructor for class nxopen.cae.ResultParameters.SelectedCoordinateSystemData

selectedcsys() - Method in interface nxopen.cae.ResultVariable

Returns the Selected Co-ordinate System
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

selectedCurves() - Method in interface nxopen.cam.InspectionCurveFeatureBuilder

Returns the selected curves
License requirements: None.

selectedCurves() - Method in interface nxopen.geometricanalysis.CurveAnalysisCombsBuilder

Deprecated.

Deprecated in NX8.5.0. Use CurveCurvatureAnalysis .

selectedCurves() - Method in interface nxopen.geometricanalysis.CurveAnalysisInflectionsBuilder

Deprecated.

Deprecated in NX8.5.0. Use GeometricAnalysis.CurveCurvatureAnalysisBuilder .

selectedCurves() - Method in interface nxopen.geometricanalysis.CurveAnalysisPeaksBuilder

Deprecated.

Deprecated in NX8.5.0. Use GeometricAnalysis.CurveCurvatureAnalysis .

selectedCurves() - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder

Returns the selected curves and/or edges
License requirements: None.

selectedCylinder() - Method in interface nxopen.cam.InspectionCylinderFeatureBuilder

Returns the selected cylinder
License requirements: None.

selectedDesignerIndex() - Method in interface nxopen.tooling.ConcurrentDesignManagementBuilder

Returns the index of the selected designer.

selectedEdges() - Method in interface nxopen.features.subdivision.SubdivisionFillBuilder

Returns the edges to form a face.

selectedEdges1() - Method in interface nxopen.features.subdivision.SubdivisionSewCageBuilder

Returns the first set of edges
License requirements: None.

selectedEdges2() - Method in interface nxopen.features.subdivision.SubdivisionSewCageBuilder

Returns the second set of edges
License requirements: None.

selectedElementFaces() - Method in interface nxopen.cae.responsesimulation.StrainGageBuilder

Returns the selected element face.

selectedElements() - Method in interface nxopen.cae.RemoveRibsBuilder

Returns the selected elements
License requirements: None.

selectedEntityType() - Method in interface nxopen.cae.PostGraphBuilder

Returns the entity type of the tags of entities which passed using SetEntityObjects function
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

selectedExpression() - Method in interface nxopen.blockstyler.ChooseExpression

Returns the SelectedExpression
License requirements: None.

selectedFace() - Method in interface nxopen.cam.InspectionSurfaceFeatureBuilder

Returns the selected face
License requirements: None.

selectEdge() - Method in interface nxopen.features.shipdesign.PlateChamferBuilder

Returns the select edge
License requirements: None.

selectEdge() - Method in interface nxopen.features.shipdesign.ShipEndCutBuilder

Returns the select edge
License requirements: None.

selectEdge() - Method in interface nxopen.geometricutilities.FacePlaneSelectionBuilder

Returns the select limit edge
License requirements: None.

SelectEdge - Interface in nxopen

Represents a single object selection.

selectEdge() - Method in interface nxopen.tooling.CornerDesignBuilder

Returns the selected edge.

selectEdge() - Method in interface nxopen.tooling.StripperVentingBuilder

Returns the select edge for cutting venting hole
License requirements: None.

selectEdge() - Method in interface nxopen.tooling.TraverseLoopBuilder

Returns the selected edges and curves which will form the loop.

selectEdge() - Method in interface nxopen.tooling.WireHoleBuilder

Returns the select edge
License requirements: None.

selectEdge() - Method in interface nxopen.weld.UserDefinedWeldBuilder

Returns the select edge.

SelectEdge.ValueData - Class in nxopen

This class holds the data returned from SelectEdge.getValue()

SelectEdge.ValueWithCaeSetObjectInfoData - Class in nxopen

This class holds the data returned from SelectEdge.getValue()

SelectEdge.ValueWithSnapData - Class in nxopen

This class holds the data returned from SelectEdge.getValue()

selectEdgeFaceBodyBlock() - Method in interface nxopen.cae.MergeFaceBuilder

Returns the geom selection for intersection curve
License requirements: None.

SelectEdgeList - Interface in nxopen

Represents a list of objects on a selection list.

selectedGeometry() - Method in interface nxopen.cam.InspectionCparlnFeatureBuilder

Returns the selected geometry, consisting of two parallel lines
License requirements: None.

selectedGeometry() - Method in interface nxopen.cam.InspectionCylinderFeatureBuilder

Returns the selected cylinder geometry
License requirements: None.

selectEdges() - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder

Returns the select curve
License requirements: None.

selectedIcon() - Method in interface nxopen.blockstyler.Node

Returns the selected icon.

selectedindex - Variable in class nxopen.mechatronics.TagTableBuilder.ListParameterData

selectedItemIndex() - Method in interface nxopen.blockstyler.ListBox

Returns the SelectedItemIndex.

selectedItemString() - Method in interface nxopen.blockstyler.ListBox

Returns the SelectedItemString.

selectedLoadTransferListItem() - Method in interface nxopen.cae.SimMotionLoadsBuilder

Returns the selected load transfer item
License requirements: None.

selectedNode() - Method in interface nxopen.cae.responsesimulation.StrainGageBuilder

Returns the destination nodes, Only available when the strain gage's placement type is CAE.ResponseSimulation.StrainGagePlacementType#NODE
License requirements: nx_response_anlys ("NX Response Analysis")

Created in NX6.0.0

selectedNum - Variable in class nxopen.uf.UFUi.SelectConeheadData

selectedObject - Variable in class nxopen.features.subdivision.CageManipulatorData.ObjectSelectionData

The selected object.

selectedObjects() - Method in interface nxopen.annotations.HoleTableBuilder

Returns the list of selected objects.

selectedObjects() - Method in interface nxopen.assemblies.AssembliesGeneralPropertiesBuilder

Returns the selected object(s) list.

selectedObjects() - Method in interface nxopen.assemblies.AssembliesParameterPropertiesBuilder

Returns the selected object(s) list.

selectedObjects() - Method in interface nxopen.AttributePropertiesBaseBuilder

Returns the selected object(s) list.

selectedObjects() - Method in interface nxopen.cam.CamGeneralPropertiesBuilder

Deprecated.

Deprecated in NX9.0.1. Use GeneralPropertiesBuilder instead.

selectedObjects() - Method in interface nxopen.cam.GeneralPropertiesBuilder

Returns the selected object(s) list.

selectedObjects() - Method in interface nxopen.drawings.DrawingsPropertiesBuilder

Returns the selected object(s) list.

selectedObjects() - Method in interface nxopen.FeatureGeneralPropertiesBuilder

Returns the selected object(s) list.

selectedObjects() - Method in interface nxopen.layout2d.CreateComponentFrom3DBuilder

Returns the selected objects of Solid body or Component type
License requirements: nx_layout ("NX Layout")
.

selectedObjects() - Method in interface nxopen.MassPropertiesBuilder

Returns the selected objects list.

selectedObjects() - Method in interface nxopen.ObjectGeneralPropertiesBuilder

Returns the selected object(s) list.

selectedObjects() - Method in interface nxopen.pdm.EffectivityAttributePropertiesBuilder

Returns the selected object(s) list.

selectedObjects() - Method in interface nxopen.PreviewPropertiesBuilder

Returns the selected object(s) list.

selectedPart() - Method in interface nxopen.routing.EditPlacePartBuilder

Returns the target body to edit part placement
License requirements: routing_base ("Routing Basic")
.

selectedPhysicsObject() - Method in interface nxopen.mechatronics.GenericSensorBuilder

Returns the physics select.

selectedPhysicsObject() - Method in interface nxopen.mechatronics.LimitSwitchBuilder

Returns the physics select.

selectedPhysicsObject() - Method in interface nxopen.mechatronics.RelayBuilder

Returns the physics select.

selectedPlane() - Method in interface nxopen.cam.InspectionPlaneFeatureBuilder

Returns the selected plane
License requirements: None.

selectedPMI() - Method in interface nxopen.annotations.PmiWaveLinkBuilder

Returns the list of selected PMI to be WAVE linked
License requirements: solid_modeling ("SOLIDS MODELING")
.

selectedPoints() - Method in interface nxopen.cam.InspectionDeleteMeaPtsBuilder

Returns the selected analysis points to delete
License requirements: None.

selectedPoints() - Method in interface nxopen.linedesigner.JigOnPlaneBuilder

Returns the points selection
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

selectedPort() - Method in interface nxopen.routing.DivisionsBuilder

Returns the Port to identify the cross-section that is to be split
License requirements: routing_hvac ("Routing HVAC")

Created in NX7.5.0

selectedRegion() - Method in interface nxopen.drawings.AddObjectsToRegionBuilder

Returns the get selected region
License requirements: None.

selectedRegion() - Method in interface nxopen.drawings.SelectRegionBuilder

Returns the get selected region
License requirements: None.

SelectedResultsData() - Constructor for class nxopen.cae.LaminatePostReportBuilder.SelectedResultsData

selectedSegment() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder

Returns the selected segment
License requirements: None.

selectedSheets() - Method in interface nxopen.PlotSourceBuilder

Returns the number of sheets selected
License requirements: None.

selectedSide1() - Method in interface nxopen.cam.InspectionParplnFeatureBuilder

Returns the first selected side of the parpln slot/tab
License requirements: None.

selectedSide2() - Method in interface nxopen.cam.InspectionParplnFeatureBuilder

Returns the second selected side of the parpln slot/tab
License requirements: None.

SelectedSolutionsData() - Constructor for class nxopen.cae.LaminatePostReportBuilder.SelectedSolutionsData

SELECTEDSOURCES - Static variable in class nxopen.mechatronics.ObjectSinkBuilder.DeleteSourceType

Selected sources

selectedSurfaces() - Method in interface nxopen.cam.InspectionCurveFeatureBuilder

Returns the underlying surfaces selector.

selectedTorus() - Method in interface nxopen.cam.InspectionTorusFeatureBuilder

Returns the selected torus
License requirements: None.

selectedView() - Method in interface nxopen.drawings.AddRemoveBoxViewBuilder

Returns the selected view
License requirements: None.

selectedView() - Method in interface nxopen.drawings.SelectModelViewBuilder

Returns the selected view
License requirements: None.

selectElectrode() - Method in interface nxopen.tooling.ElectrodeCopyBuilder

Returns the selected electrode
License requirements: None.

selectElectrodeBlock() - Method in interface nxopen.tooling.UndersizeBuilder

Deprecated.

Deprecated in NX10.0.0. Use Tooling.UndersizeBuilder#electrodeBodies instead.

SelectElement - Interface in nxopen.blockstyler

Represents a Select Elements block .

selectElement() - Method in interface nxopen.cae.CfdLocalResolutionConstraintBuilder

Returns the selected shell element
License requirements: None.

selectElementMgr() - Method in interface nxopen.cae.CaePart

Returns the select element manager belonging to this IFem .

selectElements() - Method in interface nxopen.cae.LaminateElementFilterBuilder

Returns the selected elements
License requirements: nx_lam_composites ("Laminate Composites")
.

SelectElementsBuilder - Interface in nxopen.cae

Represents a SelectElementsBuilder
To create a new instance of this class, use SelectElementsManager.createSelectElementsBuilder()

Created in NX5.0.0

selectElementsGroupOne() - Method in interface nxopen.cae.GroupByBoundaryBuilder

Returns the elements in group one
License requirements: None.

selectElementsGroupTwo() - Method in interface nxopen.cae.GroupByBoundaryBuilder

Returns the elements in group two
License requirements: None.

SelectElementsManager - Interface in nxopen.cae

Provides method for creating builder for select element operation commands in both fem and sim part
To obtain an instance of this class, refer to CaePart

Created in NX5.0.0

selectEndLimit() - Method in interface nxopen.features.shipdesign.EdgeCutBuilder

Returns the select end limit.

selectEndPlane() - Method in interface nxopen.tooling.DieEngTrimTaskBuilder

Returns the selected end plane.

selectEndTrim() - Method in interface nxopen.features.shipdesign.SteelVentHolesBuilder

Returns the select end trim - used to trim the end of the section guide.

selectEndTrim() - Method in interface nxopen.features.shipdesign.VentilationHoles2Builder

Returns the select end trim
License requirements: None.

selectEntities(NXObject[]) - Method in interface nxopen.features.FaceRecognitionBuilder

Adds entities to collector
License requirements: gateway ("UG GATEWAY")
.

selectEntity(String) - Method in interface nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder

This command selects one entity.

selectEntityAdd() - Method in interface nxopen.tooling.LayoutManagementBuilder

Returns the select entity to add into the station
License requirements: None.

selectEntityRemove() - Method in interface nxopen.tooling.LayoutManagementBuilder

Returns the select entity to remove from the station
License requirements: None.

selectExistingPoint() - Method in interface nxopen.cam.InspectionLinearMoveToPointBuilder

Returns the select existing point
License requirements: None.

selectExistingPoint() - Method in interface nxopen.cam.InspectionMeasurePointBuilder

Returns the select existing point
License requirements: None.

SelectExpressionList - Interface in nxopen

Represents a list of objects on a selection list.

selectFace() - Method in interface nxopen.annotations.ArbitraryAreaSeedBuilder

Returns the select face
License requirements: None.

selectFace() - Method in interface nxopen.annotations.RegionBuilder

Returns the select face Only available when region type is RegionBuilder.Types.RECTANGULAR_REGION , RegionBuilder.Types.CIRCULAR_REGION , RegionBuilder.Types.ANNULAR_REGION
License requirements: None.

selectface() - Method in interface nxopen.features.ShelfBuilder

Returns the selected face
License requirements: None.

selectFace() - Method in interface nxopen.features.shipdesign.ExcessMaterialBuilder

Deprecated.

Deprecated in NX8.0.0. Use ExcessMaterialBuilder.selectFaces() instead.

selectFace() - Method in interface nxopen.features.shipdesign.ProfileBuilder

Returns the placement faces or datum plane
License requirements: None.

selectFace() - Method in interface nxopen.features.shipdesign.SteelCollarPlateBuilder

Returns the select face.

selectFace() - Method in interface nxopen.features.vehicledesign.HoodVisibilityBuilder

Returns the hood face
License requirements: None.

selectFace() - Method in interface nxopen.geometricutilities.FacePlaneSelectionBuilder

Returns the select face
License requirements: None.

selectFace() - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusBuilder

Returns the selected entities for performing the radius reduction operation, which selected by "Select Faces by Radius"
License requirements: None.

selectFace() - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusFaceGroupBuilder

Returns the selected entities of single chain for performing radius reduction
License requirements: None.

SelectFace - Interface in nxopen

Represents a single object selection.

selectFace() - Method in interface nxopen.tooling.ClearanceManagementBuilder

Returns the select face.

selectFace() - Method in interface nxopen.tooling.FaceColorManagementBuilder

Returns the selected faces
License requirements: None.

selectFace() - Method in interface nxopen.tooling.GeneralInsertBuilder

Returns the select face
License requirements: None.

selectFace() - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder

Returns the select face
License requirements: None.

selectFace() - Method in interface nxopen.tooling.SpecialFormingBuilder

Returns the select face
License requirements: None.

selectFace() - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder

Returns the select face
License requirements: None.

SelectFace.ValueData - Class in nxopen

This class holds the data returned from SelectFace.getValue()

SelectFace.ValueWithCaeSetObjectInfoData - Class in nxopen

This class holds the data returned from SelectFace.getValue()

SelectFace.ValueWithSnapData - Class in nxopen

This class holds the data returned from SelectFace.getValue()

selectFaceAccordingToAttribute() - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder

Returns the faces according to attribute
License requirements: None.

SelectFaceList - Interface in nxopen

Represents a list of objects on a selection list.

selectFaces() - Method in interface nxopen.features.shipdesign.ExcessMaterialBuilder

Returns the faces that need to have excess material.

selectFaces() - Method in interface nxopen.tooling.BackingPadBuilder

Returns the select faces
License requirements: None.

selectFaces() - Method in interface nxopen.tooling.BurringInsertBuilder

Returns the burring face of burring region.

SelectFacetedBody - Interface in nxopen.facet

Represents a single object selection.

SelectFacetedBody.ValueData - Class in nxopen.facet

This class holds the data returned from SelectFacetedBody.getValue()

SelectFacetedBody.ValueWithCaeSetObjectInfoData - Class in nxopen.facet

This class holds the data returned from SelectFacetedBody.getValue()

SelectFacetedBody.ValueWithSnapData - Class in nxopen.facet

This class holds the data returned from SelectFacetedBody.getValue()

SelectFacetedBodyList - Interface in nxopen.facet

Represents a list of objects on a selection list.

selectFaceToDivide() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder

Returns the select face to divide
License requirements: None.

SelectFeature - Interface in nxopen.blockstyler

Represents a Select Feature block .

selectFeature() - Method in interface nxopen.cam.InspectionPathBuilder

Returns the selector for the inspection feature
License requirements: None.

selectFeature() - Method in interface nxopen.features.ColorFeatureBuilder

Returns the features to color
License requirements: None.

selectFeature() - Method in interface nxopen.features.ColorFeatureGroupBuilder

Returns the features to color
License requirements: None.

selectFeature() - Method in interface nxopen.features.ReplaceFeatureBuilder

Returns the selection list of features to be replaced
License requirements: None.

SelectFeature - Interface in nxopen.features

Represents a single object selection.

SelectFeature.ValueData - Class in nxopen.features

This class holds the data returned from SelectFeature.getValue()

SelectFeature.ValueWithCaeSetObjectInfoData - Class in nxopen.features

This class holds the data returned from SelectFeature.getValue()

SelectFeature.ValueWithSnapData - Class in nxopen.features

This class holds the data returned from SelectFeature.getValue()

SelectFeatureList - Interface in nxopen.features

Represents a list of objects on a selection list.

selectFeatures() - Method in interface nxopen.cam.InspectionCreatePathsBuilder

Returns the select features button
License requirements: None.

selectFeatures() - Method in interface nxopen.cam.InspectionPatternFeatureBuilder

Returns the select features button used to select features from the screen
License requirements: None.

selectFeatures() - Method in interface nxopen.features.shipdesign.ShipDesignVersionUpBuilder

Returns the select features
License requirements: None.

selectFeatures(String, Selection.SelectionFeatureType) - Method in interface nxopen.Selection

Select features
License requirements: None.

SelectFeaturesData() - Constructor for class nxopen.Selection.SelectFeaturesData

SelectFEElemFaceList - Interface in nxopen.cae

Represents a list of objects on a selection list.

SelectFENode - Interface in nxopen.cae

Represents a single object selection.

SelectFENode.ValueData - Class in nxopen.cae

This class holds the data returned from SelectFENode.getValue()

SelectFENode.ValueWithCaeSetObjectInfoData - Class in nxopen.cae

This class holds the data returned from SelectFENode.getValue()

SelectFENode.ValueWithSnapData - Class in nxopen.cae

This class holds the data returned from SelectFENode.getValue()

SelectFENodeList - Interface in nxopen.cae

Represents a list of objects on a selection list.

selectField(String) - Method in interface nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder

This command selects one field.

selectFile(String, boolean) - Method in interface nxopen.annotations.ImportAutocadBlockBuilder

Selects or deselects a file
License requirements: nx_layout ("NX Layout")
.

selectFirstEdgeFace(DisplayableObject, DisplayableObject) - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder

Selection of first edge or face
License requirements: gateway ("UG GATEWAY")
.

selectFirstTri() - Method in interface nxopen.cae.CombineTrisBuilder

Returns the selected first tri element
License requirements: None.

SelectFlatPattern - Interface in nxopen.features

Represents a single object selection.

SelectFlatPattern.ValueData - Class in nxopen.features

This class holds the data returned from SelectFlatPattern.getValue()

SelectFlatPattern.ValueWithCaeSetObjectInfoData - Class in nxopen.features

This class holds the data returned from SelectFlatPattern.getValue()

SelectFlatPattern.ValueWithSnapData - Class in nxopen.features

This class holds the data returned from SelectFlatPattern.getValue()

selectFlatteningFeature() - Method in interface nxopen.FlatteningBuilder

Deprecated.

Deprecated in NX11.0.0. Use FlatteningAndFormingBuilder instead.

selectFolder(String, boolean) - Method in interface nxopen.annotations.ImportAutocadBlockBuilder

Selects or deselects a folder
License requirements: nx_layout ("NX Layout")
.

selectFont(String, TextBuilder.ScriptOptions) - Method in interface nxopen.features.TextBuilder

Selects the font along with appropriate character set
License requirements: solid_modeling ("SOLIDS MODELING")
.

selectFormingBlock() - Method in interface nxopen.tooling.SpecialFormingBuilder

Returns the select forming block
License requirements: None.

selectFormingFaces() - Method in interface nxopen.tooling.FormingInsertBuilder

Returns the forming faces of forming region.

selectFrame() - Method in interface nxopen.features.shipdesign.SectionViewBuilder

Returns the select frame
License requirements: None.

selectFrom() - Method in interface nxopen.tooling.CornerDesignBuilder

Returns the selection options.

selectFromFace() - Method in interface nxopen.tooling.ElectrodeCopyBuilder

Returns the selected 'from' face
License requirements: None.

selectGeometry() - Method in interface nxopen.cae.SurfaceCoatBuilder

Returns the selected geometry object(s)
License requirements: nx_masterfem ("Finite Element Modeling")
.

selectGeometryProjectedAsArcs() - Method in interface nxopen.drawings.ViewWorkflowBuilder

Returns the Select Geometry Projected as Arcs provides options for selection of SPLARCs entity for centerlines and Annotations
License requirements: None.

selectGeomObject() - Method in interface nxopen.mechatronics.ProxyObjectBuilder

Returns the select geometry object that describes the proxy object
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

selectGridArea() - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder

Returns the select grid area
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

SelectGroup - Interface in nxopen

Represents a single object selection.

SelectGroup.ValueData - Class in nxopen

This class holds the data returned from SelectGroup.getValue()

SelectGroup.ValueWithCaeSetObjectInfoData - Class in nxopen

This class holds the data returned from SelectGroup.getValue()

SelectGroup.ValueWithSnapData - Class in nxopen

This class holds the data returned from SelectGroup.getValue()

selectGuideCurve() - Method in interface nxopen.features.shipdesign.SteelSupportBuilder

Returns the select guide curve (only used with "SpecifyLine" creation method)
License requirements: None.

selectGuideCurve() - Method in interface nxopen.features.shipdesign.WeldCutBuilder

Returns the selection object for the guide curve.

selectHead() - Method in interface nxopen.tooling.SubInsertBuilder

Returns the head of sub-insert
License requirements: None.

selectHoleAxis() - Method in interface nxopen.tooling.FaceColorManagementBuilder

Returns the hole axis
License requirements: None.

selectHoles() - Method in interface nxopen.tooling.HoleDatumSymbolBuilder

Returns the select holes
License requirements: None.

selectHoles() - Method in interface nxopen.tooling.HoleManufacturingNoteBuilder

Returns the selected holes
License requirements: None.

selectHolesAccordingToAttribute() - Method in interface nxopen.tooling.HoleDatumSymbolBuilder

Returns the select holes according to attribute
License requirements: None.

selectHolesAutomatically() - Method in interface nxopen.tooling.AutoDimensionBuilder

Returns the option whether to select holes automatically
License requirements: None.

SelectHydraulicCylinderList - Interface in nxopen.mechatronics

Represents a list of objects on a selection list.

SelectIBaseCurve - Interface in nxopen

Represents a single object selection.

SelectIBaseCurve.ValueData - Class in nxopen

This class holds the data returned from SelectIBaseCurve.getValue()

SelectIBaseCurve.ValueWithCaeSetObjectInfoData - Class in nxopen

This class holds the data returned from SelectIBaseCurve.getValue()

SelectIBaseCurve.ValueWithSnapData - Class in nxopen

This class holds the data returned from SelectIBaseCurve.getValue()

SelectIBaseCurveList - Interface in nxopen

Represents a list of objects on a selection list.

SelectIBasePlaneList - Interface in nxopen

Represents a list of objects on a selection list.

SelectICurve - Interface in nxopen

Represents a single object selection.

SelectICurve.ValueData - Class in nxopen

This class holds the data returned from SelectICurve.getValue()

SelectICurve.ValueWithCaeSetObjectInfoData - Class in nxopen

This class holds the data returned from SelectICurve.getValue()

SelectICurve.ValueWithSnapData - Class in nxopen

This class holds the data returned from SelectICurve.getValue()

SelectICurveList - Interface in nxopen

Represents a list of objects on a selection list.

selectInsert() - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder

Returns the select insert
License requirements: None.

selectInsertToDelete() - Method in interface nxopen.tooling.SpecialFormingBuilder

Returns the select insert to delete
License requirements: None.

selectInsertToDeleteRamp() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder

Returns the select insert to delete ramp
License requirements: None.

selectInstance() - Method in interface nxopen.tooling.LayoutRepositionBuilder

Returns the select instance
License requirements: None.

SelectINXObjectList - Interface in nxopen

Represents a list of objects on a selection list.

selection - Variable in class nxopen.annotations.SelectAnnotation.ValueData

selected object

selection - Variable in class nxopen.annotations.SelectAnnotation.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.annotations.SelectDimension.ValueData

selected object

selection - Variable in class nxopen.annotations.SelectDimension.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.assemblies.SelectComponent.ValueData

selected object

selection - Variable in class nxopen.assemblies.SelectComponent.ValueWithCaeSetObjectInfoData

selected object

selection() - Method in interface nxopen.cae.LaminateDrapingExtensionBuilder

Returns the draping extension domain.

selection() - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder

Returns the geometric face(s) and element faces on which to perform the extrusion
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

selection() - Method in interface nxopen.cae.LaminateFillSetupBuilder

Returns the face(s) on which to perform the fill
License requirements: None.

selection() - Method in interface nxopen.cae.LaminateImportedLayupBuilder

Returns the geometric face(s) and element face(s) on which to assign the material orientation
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

selection() - Method in interface nxopen.cae.LaminateImportZonesBuilder

Returns the geometric face(s) and element face(s) on which to zones will be imported
License requirements: None.

selection() - Method in interface nxopen.cae.LaminateLayupOffsetBuilder

Returns the geometric face(s) and element faces on which to assign the layup offset rule
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

selection() - Method in interface nxopen.cae.LaminateMatOrientationBuilder

Returns the geometric face(s) and element faces on which to assign the material orientation
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

selection() - Method in interface nxopen.cae.MeshControlBuilder

Returns the selection
License requirements: nx_masterfem ("Finite Element Modeling")
.

selection() - Method in interface nxopen.cae.QueryCurveBuilder

Returns the selection
License requirements: nx_masterfem ("Finite Element Modeling")
.

selection - Variable in class nxopen.cae.SelectCAEBody.ValueData

selected object

selection - Variable in class nxopen.cae.SelectCAEBody.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.cae.SelectCAEEdge.ValueData

selected object

selection - Variable in class nxopen.cae.SelectCAEEdge.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.cae.SelectCAEFace.ValueData

selected object

selection - Variable in class nxopen.cae.SelectCAEFace.ValueWithCaeSetObjectInfoData

selected object

selection() - Method in interface nxopen.cae.SelectElementsBuilder

Returns the selection
License requirements: nx_masterfem ("Finite Element Modeling")
.

selection - Variable in class nxopen.cae.SelectFENode.ValueData

selected object

selection - Variable in class nxopen.cae.SelectFENode.ValueWithCaeSetObjectInfoData

selected object

selection() - Method in interface nxopen.cae.ShowAdjacentBuilder

Returns the selection
License requirements: None.

selection() - Method in interface nxopen.cae.ShowHideBuilder

Returns the selection
License requirements: None.

selection() - Method in interface nxopen.cae.ShowOnlyBuilder

Returns the selection
License requirements: None.

selection() - Method in interface nxopen.cam.CutVolume

Returns the selection
License requirements: None.

selection() - Method in interface nxopen.cam.CutVolumeGeom

Returns the selection
License requirements: None.

selection() - Method in interface nxopen.cam.GeometrySet

Returns the selection containing the geometric entities
License requirements: None.

selection() - Method in interface nxopen.cam.HoleBossGeom

Returns the selection geometry
License requirements: None.

selection - Variable in class nxopen.cam.SelectCAMFeature.ValueData

selected object

selection - Variable in class nxopen.cam.SelectCAMFeature.ValueWithCaeSetObjectInfoData

selected object

SELECTION - Static variable in class nxopen.die.DieDirectionBuilder.DirectionType

Select a coordinate system (-Z) or plane for the direction.

SELECTION - Static variable in class nxopen.die.DiePlaneBuilder.PlaneType

Select the plane to be used.

selection() - Method in interface nxopen.drafting.CutCopyPasteLeaderBuilder

Returns the selection to reassociate leader
License requirements: None.

selection() - Method in interface nxopen.drawings.RemoveObjectsBuilder

Returns the selection
License requirements: None.

selection - Variable in class nxopen.drawings.SelectDraftingView.ValueData

selected object

selection - Variable in class nxopen.drawings.SelectDraftingView.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.drawings.SelectDrawingRegion.ValueData

selected object

selection - Variable in class nxopen.drawings.SelectDrawingRegion.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.drawings.SelectDrawingView.ValueData

selected object

selection - Variable in class nxopen.drawings.SelectDrawingView.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.drawings.SelectSectionLine.ValueData

selected object

selection - Variable in class nxopen.drawings.SelectSectionLine.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.facet.SelectFacetedBody.ValueData

selected object

selection - Variable in class nxopen.facet.SelectFacetedBody.ValueWithCaeSetObjectInfoData

selected object

selection() - Method in interface nxopen.features.ExtensionBuilder

Returns the selection
License requirements: None.

selection - Variable in class nxopen.features.SelectFeature.ValueData

selected object

selection - Variable in class nxopen.features.SelectFeature.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.features.SelectFlatPattern.ValueData

selected object

selection - Variable in class nxopen.features.SelectFlatPattern.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.features.SelectPartModule.ValueData

selected object

selection - Variable in class nxopen.features.SelectPartModule.ValueWithCaeSetObjectInfoData

selected object

selection() - Method in interface nxopen.features.VirtualBlendEdgeBuilder

Returns the select blend face
License requirements: None.

selection() - Method in interface nxopen.layout2d.ExportComponentHierarchyBuilder

Returns the selected objects which may be of Component or Sketch type
License requirements: None.

selection - Variable in class nxopen.layout2d.SelectComponent.ValueData

selected object

selection - Variable in class nxopen.layout2d.SelectComponent.ValueWithCaeSetObjectInfoData

selected object

selection() - Method in interface nxopen.linedesigner.GlobalSelectionBuilder

Returns the selected objects
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

selection - Variable in class nxopen.mechatronics.SelectAdapterSignal.ValueData

selected object

selection - Variable in class nxopen.mechatronics.SelectAdapterSignal.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.mechatronics.SelectCollisionSensor.ValueData

selected object

selection - Variable in class nxopen.mechatronics.SelectCollisionSensor.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.mechatronics.SelectPhysicsConstraint.ValueData

selected object

selection - Variable in class nxopen.mechatronics.SelectPhysicsConstraint.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.mechatronics.SelectPhysicsJoint.ValueData

selected object

selection - Variable in class nxopen.mechatronics.SelectPhysicsJoint.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.mechatronics.SelectRigidBody.ValueData

selected object

selection - Variable in class nxopen.mechatronics.SelectRigidBody.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.mechatronics.SelectSystemObject.ValueData

selected object

selection - Variable in class nxopen.mechatronics.SelectSystemObject.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.mechatronics.SelectTagFormObject.ValueData

selected object

selection - Variable in class nxopen.mechatronics.SelectTagFormObject.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.motion.SelectControlPort.ValueData

selected object

selection - Variable in class nxopen.motion.SelectControlPort.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.motion.SelectJoint.ValueData

selected object

selection - Variable in class nxopen.motion.SelectJoint.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.motion.SelectLink.ValueData

selected object

selection - Variable in class nxopen.motion.SelectLink.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.motion.SelectMarker.ValueData

selected object

selection - Variable in class nxopen.motion.SelectMarker.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.motion.SelectRoad.ValueData

selected object

selection - Variable in class nxopen.motion.SelectRoad.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.motion.SelectTirePropertyBasic.ValueData

selected object

selection - Variable in class nxopen.motion.SelectTirePropertyBasic.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.motion.SelectTirePropertyCd.ValueData

selected object

selection - Variable in class nxopen.motion.SelectTirePropertyCd.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.motion.SelectTirePropertyFt.ValueData

selected object

selection - Variable in class nxopen.motion.SelectTirePropertyFt.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.motion.SelectTirePropertyMotorcycle.ValueData

selected object

selection - Variable in class nxopen.motion.SelectTirePropertyMotorcycle.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.motion.SelectTirePropertyNonInertial.ValueData

selected object

selection - Variable in class nxopen.motion.SelectTirePropertyNonInertial.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.motion.SelectTirePropertyTno.ValueData

selected object

selection - Variable in class nxopen.motion.SelectTirePropertyTno.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.options.OptionsManager.ReorderSelectableStringListValueData

the selection bit

selection() - Method in interface nxopen.routing.ConnectPathBuilder

Returns the Routing.ControlPoints that are selected.

SELECTION - Static variable in class nxopen.routing.IsoDrawingBuilder.RunsToDrawTypes

selection - Variable in class nxopen.routing.SelectControlPoint.ValueData

selected object

selection - Variable in class nxopen.routing.SelectControlPoint.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.routing.SelectISegment.ValueData

selected object

selection - Variable in class nxopen.routing.SelectISegment.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.routing.SelectLineSegment.ValueData

selected object

selection - Variable in class nxopen.routing.SelectLineSegment.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.routing.SelectPort.ValueData

selected object

selection - Variable in class nxopen.routing.SelectPort.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.routing.SelectRun.ValueData

selected object

selection - Variable in class nxopen.routing.SelectRun.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.routing.SelectStock.ValueData

selected object

selection - Variable in class nxopen.routing.SelectStock.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.SelectBody.ValueData

selected object

selection - Variable in class nxopen.SelectBody.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.SelectCartesianCoordinateSystem.ValueData

selected object

selection - Variable in class nxopen.SelectCartesianCoordinateSystem.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.SelectCoordinateSystem.ValueData

selected object

selection - Variable in class nxopen.SelectCoordinateSystem.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.SelectCurve.ValueData

selected object

selection - Variable in class nxopen.SelectCurve.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.SelectDatumPlane.ValueData

selected object

selection - Variable in class nxopen.SelectDatumPlane.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.SelectDisplayableObject.ValueData

selected object

selection - Variable in class nxopen.SelectDisplayableObject.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.SelectEdge.ValueData

selected object

selection - Variable in class nxopen.SelectEdge.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.SelectFace.ValueData

selected object

selection - Variable in class nxopen.SelectFace.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.SelectGroup.ValueData

selected object

selection - Variable in class nxopen.SelectGroup.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.SelectIBaseCurve.ValueData

selected object

selection - Variable in class nxopen.SelectIBaseCurve.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.SelectICurve.ValueData

selected object

selection - Variable in class nxopen.SelectICurve.ValueWithCaeSetObjectInfoData

selected object

Selection - Interface in nxopen

Defines an interface object for executing selection operations
To obtain an instance of this class, refer to UI

Created in NX3.0.0

selection - Variable in class nxopen.Selection.SelectionDescriptor

selection - Variable in class nxopen.SelectIParameterizedSurface.ValueData

selected object

selection - Variable in class nxopen.SelectIParameterizedSurface.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.SelectIReferenceAxis.ValueData

selected object

selection - Variable in class nxopen.SelectIReferenceAxis.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.SelectISurface.ValueData

selected object

selection - Variable in class nxopen.SelectISurface.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.SelectLine.ValueData

selected object

selection - Variable in class nxopen.SelectLine.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.SelectNXObject.ValueData

selected object

selection - Variable in class nxopen.SelectNXObject.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.SelectObject.ValueData

selected object

selection - Variable in class nxopen.SelectObject.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.SelectPart.ValueData

selected object

selection - Variable in class nxopen.SelectPart.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.SelectPoint.ValueData

selected object

selection - Variable in class nxopen.SelectPoint.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.SelectSketch.ValueData

selected object

selection - Variable in class nxopen.SelectSketch.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.SelectSmartObject.ValueData

selected object

selection - Variable in class nxopen.SelectSmartObject.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.SelectSpline.ValueData

selected object

selection - Variable in class nxopen.SelectSpline.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.SelectTaggedObject.ValueData

selected object

selection - Variable in class nxopen.SelectTaggedObject.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.SelectView.ValueData

selected object

selection - Variable in class nxopen.SelectView.ValueWithCaeSetObjectInfoData

selected object

SELECTION - Static variable in class nxopen.tooling.RenameAndExportComponentBuilder.DefinitionType

selection() - Method in interface nxopen.tooling.SelectReuseLibraryItemBuilder

Returns the path of the file from the reuse library
License requirements: None.

SELECTION - Static variable in class nxopen.userdefinedobjects.UserDefinedEvent.Reason

Select UDO event

selection - Variable in class nxopen.weld.SelectDatumPin.ValueData

selected object

selection - Variable in class nxopen.weld.SelectDatumPin.ValueWithCaeSetObjectInfoData

selected object

selection - Variable in class nxopen.weld.SelectDatumSurface.ValueData

selected object

selection - Variable in class nxopen.weld.SelectDatumSurface.ValueWithCaeSetObjectInfoData

selected object

Selection.AskSelectionCursorPositionData - Class in nxopen

This class holds the data returned from Selection.askSelectionCursorPosition(nxopen.SelectionHandle)

Selection.AskSelectionRectanglePositionData - Class in nxopen

This class holds the data returned from Selection.askSelectionRectanglePosition(nxopen.SelectionHandle)

Selection.DialogResponse - Class in nxopen

Specify the user response for general dialogs.

Selection.FilterCallback - Interface in nxopen

It is an optional callback which the user can provide to perform application specific filtering when selecting objects.

Selection.FilterTaggedObjectCallback - Interface in nxopen

It is an optional callback which the user can provide to perform application specific filtering when selecting tagged objects.

Selection.MaskTriple - Class in nxopen

Used in selection methods to set the types of objects that are selectable.

Selection.Response - Class in nxopen

Specify the user response for the selection operation.

Selection.SelectFeaturesData - Class in nxopen

This class holds the data returned from Selection.selectFeatures(java.lang.String, nxopen.Selection.SelectionFeatureType)

Selection.SelectionAction - Class in nxopen

Indicates the type of action to perform when an object is selected.

Selection.SelectionCallback - Interface in nxopen

It is an optional callback which the user can provide to customize his selection

Selection.SelectionDescriptor - Class in nxopen

For a rectangle deselection, the fields deselection, multipleSelection, rectangle bits would be set.

Selection.SelectionFeatureType - Class in nxopen

Specify the type of features to select.

Selection.SelectionScope - Class in nxopen

Indicates the scope for selecting objects.

Selection.SelectionType - Class in nxopen

Indicates the general class of object to filter selection.

Selection.SelectObjectData - Class in nxopen

This class holds the data returned from Selection.selectObject(java.lang.String, java.lang.String, nxopen.Selection.SelectionScope, boolean, boolean)

Selection.SelectObjectsData - Class in nxopen

This class holds the data returned from Selection.selectObjects(java.lang.String, java.lang.String, nxopen.Selection.SelectionScope, boolean, boolean)

Selection.SelectScreenPositionData - Class in nxopen

This class holds the data returned from Selection.selectScreenPosition(java.lang.String)

Selection.SelectTaggedObjectData - Class in nxopen

This class holds the data returned from Selection.selectTaggedObject(java.lang.String, java.lang.String, nxopen.Selection.SelectionScope, boolean, boolean)

Selection.SelectTaggedObjectsData - Class in nxopen

This class holds the data returned from Selection.selectTaggedObjects(java.lang.String, java.lang.String, nxopen.Selection.SelectionScope, boolean, boolean)

Selection.TaggedObjectSelectionCallback - Interface in nxopen

It is an optional callback which the user can provide to customize his selection of tagged objects

Selection.UistylerSelectionType - Class in nxopen

Indicates the general class of object to filter selection.

selection1 - Variable in class nxopen.annotations.SelectAnnotation.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.annotations.SelectDimension.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.assemblies.SelectComponent.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.cae.SelectCAEBody.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.cae.SelectCAEEdge.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.cae.SelectCAEFace.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.cae.SelectFENode.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.cam.SelectCAMFeature.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.drawings.SelectDraftingView.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.drawings.SelectDrawingRegion.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.drawings.SelectDrawingView.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.drawings.SelectSectionLine.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.facet.SelectFacetedBody.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.features.SelectFeature.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.features.SelectFlatPattern.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.features.SelectPartModule.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.layout2d.SelectComponent.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.mechatronics.SelectAdapterSignal.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.mechatronics.SelectCollisionSensor.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.mechatronics.SelectPhysicsConstraint.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.mechatronics.SelectPhysicsJoint.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.mechatronics.SelectRigidBody.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.mechatronics.SelectSystemObject.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.mechatronics.SelectTagFormObject.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.motion.SelectControlPort.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.motion.SelectJoint.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.motion.SelectLink.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.motion.SelectMarker.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.motion.SelectRoad.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.motion.SelectTirePropertyBasic.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.motion.SelectTirePropertyCd.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.motion.SelectTirePropertyFt.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.motion.SelectTirePropertyMotorcycle.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.motion.SelectTirePropertyNonInertial.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.motion.SelectTirePropertyTno.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.routing.SelectControlPoint.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.routing.SelectISegment.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.routing.SelectLineSegment.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.routing.SelectPort.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.routing.SelectRun.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.routing.SelectStock.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.SelectBody.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.SelectCartesianCoordinateSystem.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.SelectCoordinateSystem.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.SelectCurve.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.SelectDatumPlane.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.SelectDisplayableObject.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.SelectEdge.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.SelectFace.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.SelectGroup.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.SelectIBaseCurve.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.SelectICurve.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.SelectIParameterizedSurface.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.SelectIReferenceAxis.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.SelectISurface.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.SelectLine.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.SelectNXObject.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.SelectObject.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.SelectPart.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.SelectPoint.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.SelectSketch.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.SelectSmartObject.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.SelectSpline.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.SelectTaggedObject.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.SelectView.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.weld.SelectDatumPin.ValueWithSnapData

first selected object

selection1 - Variable in class nxopen.weld.SelectDatumSurface.ValueWithSnapData

first selected object

selection2 - Variable in class nxopen.annotations.SelectAnnotation.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.annotations.SelectDimension.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.assemblies.SelectComponent.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.cae.SelectCAEBody.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.cae.SelectCAEEdge.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.cae.SelectCAEFace.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.cae.SelectFENode.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.cam.SelectCAMFeature.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.drawings.SelectDraftingView.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.drawings.SelectDrawingRegion.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.drawings.SelectDrawingView.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.drawings.SelectSectionLine.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.facet.SelectFacetedBody.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.features.SelectFeature.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.features.SelectFlatPattern.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.features.SelectPartModule.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.layout2d.SelectComponent.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.mechatronics.SelectAdapterSignal.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.mechatronics.SelectCollisionSensor.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.mechatronics.SelectPhysicsConstraint.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.mechatronics.SelectPhysicsJoint.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.mechatronics.SelectRigidBody.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.mechatronics.SelectSystemObject.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.mechatronics.SelectTagFormObject.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.motion.SelectControlPort.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.motion.SelectJoint.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.motion.SelectLink.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.motion.SelectMarker.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.motion.SelectRoad.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.motion.SelectTirePropertyBasic.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.motion.SelectTirePropertyCd.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.motion.SelectTirePropertyFt.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.motion.SelectTirePropertyMotorcycle.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.motion.SelectTirePropertyNonInertial.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.motion.SelectTirePropertyTno.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.routing.SelectControlPoint.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.routing.SelectISegment.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.routing.SelectLineSegment.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.routing.SelectPort.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.routing.SelectRun.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.routing.SelectStock.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.SelectBody.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.SelectCartesianCoordinateSystem.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.SelectCoordinateSystem.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.SelectCurve.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.SelectDatumPlane.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.SelectDisplayableObject.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.SelectEdge.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.SelectFace.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.SelectGroup.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.SelectIBaseCurve.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.SelectICurve.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.SelectIParameterizedSurface.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.SelectIReferenceAxis.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.SelectISurface.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.SelectLine.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.SelectNXObject.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.SelectObject.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.SelectPart.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.SelectPoint.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.SelectSketch.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.SelectSmartObject.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.SelectSpline.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.SelectTaggedObject.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.SelectView.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.weld.SelectDatumPin.ValueWithSnapData

second selected object

selection2 - Variable in class nxopen.weld.SelectDatumSurface.ValueWithSnapData

second selected object

SELECTION_BOX - Static variable in class nxopen.uistyler.Dialog.ItemType

SELECTION_BOX - Static variable in class nxopen.uistyler.StylerItem.ItemType

Section Box item

SELECTION_FILTER - Static variable in class nxopen.blockstyler.PropertyList.PropertyType

Selection Filter

SELECTION_FILTER - Static variable in class nxopen.PropertyContainer.PropertyType

Selection Filter

SELECTION_IN_VIEW - Static variable in class nxopen.cam.ToolPathEditorBuilder.TrimGeometryType

SELECTION_ORDER - Static variable in class nxopen.cae.ftk.DataManager.AfuRecordZValue

The Z value is selection order

SELECTION_VALUE - Static variable in class nxopen.uistyler.StylerEvent.Indicator

Selection value

selectionAreaType() - Method in interface nxopen.cae.optimization.TBSBaseDesignVariableBuilder

Returns the type of selection location on which design variable is applied
License requirements: None.

SelectionBox - Interface in nxopen.uistyler

Represents a SelectionBox for UI Styler .

SelectionBox.Activate - Interface in nxopen.uistyler

Called when a dialog user selects a list entry with a single mouse click, presses the spacebar on a selected list entry, or presses Return when the cursor is in the text field.

SelectionBox.DoubleClick - Interface in nxopen.uistyler

Called when a dialog user double-clicks on an option in the selection box or presses Return when an item is already selected.

selectionCallback(NXObject[], NXObject[], SelectionHandle) - Method in interface nxopen.Selection.SelectionCallback

Deprecated.

Deprecated in NX8.0.0. Use Selection.TaggedObjectSelectionCallback.taggedObjectSelectionCallback(nxopen.TaggedObject[], nxopen.TaggedObject[], nxopen.SelectionHandle) instead

selectionColor() - Method in interface nxopen.preferences.PartVisualizationColorSetting

Returns the selection color.

selectionComp() - Method in interface nxopen.ObjectSelector

Returns the selection comp.

selectionCompensation() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder

Returns the selection compensation
License requirements: None.

selectionCurves() - Method in interface nxopen.linedesigner.RailingFeatureBuilder

Returns the selection curves
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

selectionCutout() - Method in interface nxopen.features.shipdesign.PenetrationRequestForCutoutBuilder

Returns the selection cutout
License requirements: None.

SelectionDescriptor() - Constructor for class nxopen.Selection.SelectionDescriptor

SelectionDescriptor(boolean, boolean, boolean, boolean, boolean, boolean, boolean, boolean, boolean) - Constructor for class nxopen.Selection.SelectionDescriptor

Constructor for the SelectionDescriptor object.

selectionEdge() - Method in interface nxopen.tooling.ReferenceBlendBuilder

Returns the edge selection
License requirements: None.

selectionFace() - Method in interface nxopen.cae.MappedMeshBuilder

Returns the selection face
License requirements: None.

selectionFace() - Method in interface nxopen.tooling.ReferenceBlendBuilder

Returns the face selection
License requirements: None.

selectionFeature() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

Returns the selection feature
License requirements: None.

selectionFillet() - Method in interface nxopen.cae.Mesh3dTetBuilder

Deprecated.

Deprecated in NX11.0.0. Use CAE#meshControlBuilder instead.

selectionFilter() - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder

Returns the selection filter
License requirements: None.

selectionFilterAccordingToAttribute() - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder

Returns the selection filter according to attribute
License requirements: None.

selectionFilterToggle() - Method in interface nxopen.cae.MeshControlBuilder

Returns the selection filter toggle
License requirements: None.

selectionFrom() - Method in interface nxopen.features.shipdesign.CopyPasteNewBuilder

Returns the From geometry
License requirements: nx_ship_detail ("Ship Detail Design")
.

SelectionHandle - Interface in nxopen

Represents a SelectionHandle for UI Styler .

selectionHanger() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder

Returns the selection hanger
License requirements: None.

selectionInputObject() - Method in interface nxopen.mechatronics.RuntimeFormulaBuilder

Returns the inuput object selection
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

SelectionIntentRule - Interface in nxopen

Represents a SelectionIntentRule which essentially provides capabilities to collect curves, edges, faces and bodies.

SelectionIntentRule.RuleType - Class in nxopen

This enum represents the type of selection intent rules as specified by SelectionIntentRule

selectionLink() - Method in interface nxopen.motion.FlexBodyBuilder

Returns the selection link
License requirements: None.

selectionList() - Method in interface nxopen.cae.LaminateSelectEntitiesBuilder

Returns the selection list
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

selectionList() - Method in interface nxopen.cae.Mesh0dBuilder

Returns the selection objects
License requirements: nx_masterfem ("Finite Element Modeling")
.

selectionList() - Method in interface nxopen.cae.Mesh1dBuilder

Returns the selection objects.

selectionList() - Method in interface nxopen.cae.Mesh2dBuilder

Returns the selection objects
License requirements: nx_masterfem ("Finite Element Modeling")
.

selectionList() - Method in interface nxopen.cae.Mesh3dHexBuilder

Returns the selection objects
License requirements: nx_masterfem ("Finite Element Modeling")
.

selectionList() - Method in interface nxopen.cae.Mesh3dHybridBuilder

Returns the selection objects
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")
.

selectionList() - Method in interface nxopen.cae.Mesh3dTetBuilder

Returns the selection objects
License requirements: nx_masterfem ("Finite Element Modeling")
.

selectionList() - Method in interface nxopen.cae.modelcheck.DuplicateElementsCheckBuilder

Returns the selected objects to be checked.

selectionList() - Method in interface nxopen.cae.modelcheck.DuplicateNodesCheckBuilder

Returns the selected objects for checking.

selectionList() - Method in interface nxopen.cae.modelcheck.ElementEdgeCheckBuilder

Returns the selected objects to be checked.

selectionList() - Method in interface nxopen.cae.modelcheck.ElementMaterialOrientationCheckBuilder

Returns the selected objects to be checked.

selectionList() - Method in interface nxopen.cae.modelcheck.ElementQualityCheckBuilder

Returns the selected objects to be checked.

selectionList() - Method in interface nxopen.cae.modelcheck.ReverseShellElementNormalBuilder

Returns the selected objects to be checked.

selectionList() - Method in interface nxopen.cae.modelcheck.SolidElementFaceNormalBuilder

Returns the selected objects to be checked.

selectionList() - Method in interface nxopen.cae.ProjectNodesToCadGeometryBuilder

Deprecated.

Deprecated in NX8.5.0. Use CAE.ProjectNodesToCadGeometryBuilder#checkedObjectsList instead.

selectionList() - Method in interface nxopen.cae.Shell2SolidBuilder

Returns the selection objects
License requirements: nx_masterfem ("Finite Element Modeling")
.

selectionList() - Method in interface nxopen.features.subdivision.SelectCageObjectData

Returns the object list.

SelectionList - Interface in nxopen.geometricutilities

Represents a SelectionList
To create a new instance of this class, use Part.createSelectionList()

Created in NX8.0.0

selectionList() - Method in interface nxopen.weld.CharacteristicsBuilder

Returns the list of potential attributes and objects selected for this weld feature.

SelectionListList - Interface in nxopen.geometricutilities

Represents a list of objects.

selectionManager() - Method in interface nxopen.UI

the SelectionManager for the current session.

selectionmask - Variable in class nxopen.ApparentChainingRule.Data

The selection type none, edge or curve.

selectionMethod() - Method in interface nxopen.cam.DPMItpBuilder

Returns the flow and cross selection method
License requirements: cam_base ("CAM BASE")
.

selectionMethod() - Method in interface nxopen.features.shipdesign.MaterialEstimationBuilder

Returns the selection method.

selectionMethod() - Method in interface nxopen.features.shipdesign.WeightAndCGBuilder

Returns the selection method.

SelectionMethod - Interface in nxopen

Represents the output from a smart selector method
This is an abstract class, and cannot be created.

selectionMethodType() - Method in interface nxopen.cae.SurfaceCoatBuilder

Returns the selection method for different ways of selection
License requirements: None.

selectionModeAsString() - Method in interface nxopen.blockstyler.Tree

Returns the SelectionMode
License requirements: None.

selectionObject() - Method in interface nxopen.features.subdivision.CageSectionData

Returns the selection object.

selectionObject() - Method in interface nxopen.features.subdivision.SubdivisionExtrudeCageBuilder

Returns the selection object.

selectionObject() - Method in interface nxopen.SketchAutoDimensionBuilder

Returns the selected sketch curves to auto dimension
License requirements: None.

selectionObjects() - Method in interface nxopen.features.shipdesign.UnfoldedMinRecBuilder

Returns the ship basic design plate faces and standard part curves.

selectionOption() - Method in interface nxopen.cae.optimization.TBSLoadCaseManager

Returns the selection option
License requirements: None.

selectionOriginFeature() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

Returns the selection origin feature
License requirements: None.

selectionPMI() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

Returns the PMI selection
License requirements: None.

selectionPoint() - Method in interface nxopen.geometricanalysis.LocalRadiusAnalysisBuilder

Returns the selection point
License requirements: None.

selectionPointForCutRegion - Variable in class nxopen.uf.UFTurn.AskCutRegionOfIndexData

selectionPosition - Variable in class nxopen.features.subdivision.CageManipulatorData.ObjectSelectionData

The point at which object is selected, the point under the cursor when seen in view direction.

selectionPostCrossSection() - Method in interface nxopen.linedesigner.RailingFeatureBuilder

Returns the selection post cross section
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

selectionRadiusType() - Method in interface nxopen.display.SelPref

Returns the selection radius type
License requirements: None.

selectionReliefToEdit() - Method in interface nxopen.tooling.ReliefDesignBuilder

Returns the selected relief to edit.

selectionRuleType() - Method in interface nxopen.display.SelPref

Returns the selection rule type
License requirements: None.

selectionScope() - Method in interface nxopen.assemblies.LoadInterpartDataBuilder

Returns the selection scope type
License requirements: None.

selectionScope() - Method in interface nxopen.ObjectSelector

Returns the selection scope option.

selectionStructure() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder

Returns the selection structure
License requirements: None.

SelectionSubscriber - Interface in nxopen

Defines a SelectionSubscriber for managing selection events
To create a new instance of this class, use Selection.createSelectionSubscriber()

Created in NX11.0.0

SelectionSubscriber.OnSelectionChangeCallback - Interface in nxopen

Prototype for a callback which is called at the end of a series of changes to the set of selected objects.

selectionTarget() - Method in interface nxopen.tooling.CalculateAreaBuilder

Returns the target body to calculate area.

selectionTo() - Method in interface nxopen.features.shipdesign.CopyPasteNewBuilder

Returns the To geometry
License requirements: nx_ship_detail ("Ship Detail Design")
.

selectionTolerancedFeature() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

Returns the selection toleranced feature
License requirements: None.

selectionType() - Method in interface nxopen.annotations.BoundaryBuilder

Returns the selection type
License requirements: None.

selectionType() - Method in interface nxopen.drawings.ConvertDraftingContentsBuilder

Returns the selection type
License requirements: None.

selectionType() - Method in interface nxopen.features.shipdesign.EndCutBuilder

Returns the selection type.

selectionType() - Method in interface nxopen.features.shipdesign.MirrorShipStructureBuilder

Returns the selection type, which is structure system or feature.

selectionType() - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder

Returns the selection type.

selectionType() - Method in interface nxopen.features.shipdesign.VerifyPenetrationBuilder

Returns the dialog selection type
License requirements: None.

selectionType() - Method in interface nxopen.tooling.HoleReportBuilder

Returns the selection type to choose select view or holes in window to create hole report
License requirements: None.

selectionType() - Method in interface nxopen.tooling.RemoveHolesBuilder

Returns the selection type
License requirements: None.

SelectIParameterizedSurface - Interface in nxopen

Represents a single object selection.

SelectIParameterizedSurface.ValueData - Class in nxopen

This class holds the data returned from SelectIParameterizedSurface.getValue()

SelectIParameterizedSurface.ValueWithCaeSetObjectInfoData - Class in nxopen

This class holds the data returned from SelectIParameterizedSurface.getValue()

SelectIParameterizedSurface.ValueWithSnapData - Class in nxopen

This class holds the data returned from SelectIParameterizedSurface.getValue()

SelectIParameterizedSurfaceList - Interface in nxopen

Represents a list of objects on a selection list.

SelectIReferenceAxis - Interface in nxopen

Represents a single object selection.

SelectIReferenceAxis.ValueData - Class in nxopen

This class holds the data returned from SelectIReferenceAxis.getValue()

SelectIReferenceAxis.ValueWithCaeSetObjectInfoData - Class in nxopen

This class holds the data returned from SelectIReferenceAxis.getValue()

SelectIReferenceAxis.ValueWithSnapData - Class in nxopen

This class holds the data returned from SelectIReferenceAxis.getValue()

SelectISegment - Interface in nxopen.routing

Represents a single object selection.

SelectISegment.ValueData - Class in nxopen.routing

This class holds the data returned from SelectISegment.getValue()

SelectISegment.ValueWithCaeSetObjectInfoData - Class in nxopen.routing

This class holds the data returned from SelectISegment.getValue()

SelectISegment.ValueWithSnapData - Class in nxopen.routing

This class holds the data returned from SelectISegment.getValue()

SelectISurface - Interface in nxopen

Represents a single object selection.

SelectISurface.ValueData - Class in nxopen

This class holds the data returned from SelectISurface.getValue()

SelectISurface.ValueWithCaeSetObjectInfoData - Class in nxopen

This class holds the data returned from SelectISurface.getValue()

SelectISurface.ValueWithSnapData - Class in nxopen

This class holds the data returned from SelectISurface.getValue()

SelectJoint - Interface in nxopen.motion

Represents a single object selection.

SelectJoint.ValueData - Class in nxopen.motion

This class holds the data returned from SelectJoint.getValue()

SelectJoint.ValueWithCaeSetObjectInfoData - Class in nxopen.motion

This class holds the data returned from SelectJoint.getValue()

SelectJoint.ValueWithSnapData - Class in nxopen.motion

This class holds the data returned from SelectJoint.getValue()

selectLaminate(String) - Method in interface nxopen.cae.LaminateImportedLayupBuilder

Selects a laminate for import
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

selectLetter() - Method in interface nxopen.drawings.SectionLineStyleBuilder

Deprecated.

Deprecated in NX10.0.0. Use ViewSectionLineBuilder.selectRotationLetter() instead.

selectLine() - Method in interface nxopen.cam.InspectionLineFeatureBuilder

Returns the selected line
License requirements: None.

SelectLine - Interface in nxopen

Represents a single object selection.

SelectLine.ValueData - Class in nxopen

This class holds the data returned from SelectLine.getValue()

SelectLine.ValueWithCaeSetObjectInfoData - Class in nxopen

This class holds the data returned from SelectLine.getValue()

SelectLine.ValueWithSnapData - Class in nxopen

This class holds the data returned from SelectLine.getValue()

selectLine1() - Method in interface nxopen.features.shipdesign.Cutout2Builder

Returns the select line1 (replaced by SelectReference1 in NX8.5)
License requirements: None.

selectLine1() - Method in interface nxopen.features.shipdesign.ShipCutoutBuilder

Returns the select Line1.

selectLine1() - Method in interface nxopen.features.shipdesign.SteelSupportBuilder

Returns the first line (only used with "TwoPlanesandLines" creation method)
License requirements: None.

selectLine2() - Method in interface nxopen.features.shipdesign.Cutout2Builder

Returns the select line2 (replaced by SelectReference2 in NX8.5)
License requirements: None.

selectLine2() - Method in interface nxopen.features.shipdesign.ShipCutoutBuilder

Returns the select Line2 This line 2 is only used for the Face2Lines placement method.

selectLine2() - Method in interface nxopen.features.shipdesign.SteelSupportBuilder

Returns the second line (only used with "TwoPlanesandLines" creation method)
License requirements: None.

SelectLineSegment - Interface in nxopen.routing

Represents a single object selection.

SelectLineSegment.ValueData - Class in nxopen.routing

This class holds the data returned from SelectLineSegment.getValue()

SelectLineSegment.ValueWithCaeSetObjectInfoData - Class in nxopen.routing

This class holds the data returned from SelectLineSegment.getValue()

SelectLineSegment.ValueWithSnapData - Class in nxopen.routing

This class holds the data returned from SelectLineSegment.getValue()

selectLink() - Method in interface nxopen.motion.MarkerBuilder

Returns the select link
License requirements: None.

SelectLink - Interface in nxopen.motion

Represents a single object selection.

SelectLink.ValueData - Class in nxopen.motion

This class holds the data returned from SelectLink.getValue()

SelectLink.ValueWithCaeSetObjectInfoData - Class in nxopen.motion

This class holds the data returned from SelectLink.getValue()

SelectLink.ValueWithSnapData - Class in nxopen.motion

This class holds the data returned from SelectLink.getValue()

selectLinkTarget() - Method in interface nxopen.tooling.TrimSolidBuilder

Returns the component that the trimmed body is linked to.

selectLocator() - Method in interface nxopen.weld.LocatorReferenceBuilder

Returns the selecte locator
License requirements: None.

selectLogicals() - Method in interface nxopen.mechatronics.ECADExportBuilder

Returns the selected logical objects.

SelectLogicObjectList - Interface in nxopen.mechatronics

Represents a list of objects on a selection list.

SelectMarker - Interface in nxopen.motion

Represents a single object selection.

SelectMarker.ValueData - Class in nxopen.motion

This class holds the data returned from SelectMarker.getValue()

SelectMarker.ValueWithCaeSetObjectInfoData - Class in nxopen.motion

This class holds the data returned from SelectMarker.getValue()

SelectMarker.ValueWithSnapData - Class in nxopen.motion

This class holds the data returned from SelectMarker.getValue()

selectMasterJoint() - Method in interface nxopen.mechatronics.GraphControlBuilder

Returns the select axis joint.

selectMasterSignal() - Method in interface nxopen.mechatronics.GraphControlBuilder

Returns the select axis joint.

selectMesh() - Method in interface nxopen.cae.AutomaticMorphBuilder

Returns the selected meshes
License requirements: nx_masterfem ("Finite Element Modeling")
.

selectMesh() - Method in interface nxopen.cae.ConvexMeshBuilder

Returns the select mesh
License requirements: None.

selectMesh() - Method in interface nxopen.cae.MeshRefinementBuilder

Returns the selection objects.

selectMesh() - Method in interface nxopen.cae.ThickenMeshBuilder

Returns the select mesh
License requirements: None.

SelectMeshList - Interface in nxopen.cae

Represents a list of objects on a selection list.

selectMethod() - Method in interface nxopen.geometricutilities.BooleanRegionSelect

Returns the boolean region selection method method
License requirements: None.

selectMirrorObject() - Method in interface nxopen.weld.JointmarkBuilder

Returns the selected objects for mirror.

selectMode() - Method in interface nxopen.annotations.ImportAutocadBlockBuilder

Returns the selection mode
License requirements: nx_layout ("NX Layout")
.

selectMode() - Method in interface nxopen.annotations.ImportSymbolBuilder

Returns the selection mode
License requirements: nx_layout ("NX Layout")
.

selectModeAsString() - Method in interface nxopen.blockstyler.BodyCollector

Returns the SelectMode as string
License requirements: None.

selectModeAsString() - Method in interface nxopen.blockstyler.CurveCollector

Returns the SelectMode as string
License requirements: None.

selectModeAsString() - Method in interface nxopen.blockstyler.FaceCollector

Returns the SelectMode as string
License requirements: None.

selectModeAsString() - Method in interface nxopen.blockstyler.SelectElement

Returns the SelectMode as string
License requirements: None.

selectModeAsString() - Method in interface nxopen.blockstyler.SelectFeature

Returns the SelectMode as string
License requirements: None.

selectModeAsString() - Method in interface nxopen.blockstyler.SelectNode

Returns the SelectMode as string
License requirements: None.

selectModeAsString() - Method in interface nxopen.blockstyler.SelectObject

Returns the SelectMode as string
License requirements: None.

selectModelView() - Method in interface nxopen.drawings.BaseViewBuilder

Returns the model view
License requirements: None.

SelectModelViewBuilder - Interface in nxopen.drawings

Represents a Select Model View builder that selects a model view .

selectModes(LaminateModeProperty[]) - Method in interface nxopen.cae.LaminateSineEventBuilder

Sets the a mode property selection
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

selectNextGouge() - Method in interface nxopen.cam.ToolPathEditorBuilder

Select next gouge
License requirements: cam_base ("CAM BASE")
.

SelectNode - Interface in nxopen.blockstyler

Represents a Select Node block .

selectNode(Node, boolean, boolean) - Method in interface nxopen.blockstyler.Tree

Selects the provided node.

selectNodes(Node[], boolean, boolean) - Method in interface nxopen.blockstyler.Tree

Selects the provided nodes.

selectNominalFeature() - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder

Returns the select nominal feature button
License requirements: None.

selectNormalSurface() - Method in interface nxopen.cam.InspectionLineFeatureBuilder

Returns the underlying surface used to determine the normal and approach direction vectors
License requirements: None.

SelectNXObject - Interface in nxopen

Represents a single object selection.

SelectNXObject.ValueData - Class in nxopen

This class holds the data returned from SelectNXObject.getValue()

SelectNXObject.ValueWithCaeSetObjectInfoData - Class in nxopen

This class holds the data returned from SelectNXObject.getValue()

SelectNXObject.ValueWithSnapData - Class in nxopen

This class holds the data returned from SelectNXObject.getValue()

SelectNXObjectList - Interface in nxopen

Represents a list of objects on a selection list.

selectObject() - Method in interface nxopen.annotations.AssociativityBuilder

Returns the select object
License requirements: None.

selectObject() - Method in interface nxopen.assemblies.ProductOutlineBuilder

Returns the objects defined in Product Outline.

SelectObject - Interface in nxopen.blockstyler

Represents a Select Object block .

selectObject() - Method in interface nxopen.cae.CfdAutoRefinementConstraintBuilder

Returns the list of selected objects
License requirements: None.

selectObject() - Method in interface nxopen.cae.CfdLocalResolutionConstraintBuilder

Returns the select object
License requirements: None.

selectObject() - Method in interface nxopen.features.IsoparametricCurvesBuilder

Returns the select object for faces
License requirements: None.

selectObject() - Method in interface nxopen.features.shipdesign.ExamineSteelFeatureBuilder

Returns the Examining objects.

selectObject() - Method in interface nxopen.geometricanalysis.CurveContinuityBuilder

Returns the select object
License requirements: None.

selectObject() - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder

Returns the faces or facet bodies
License requirements: None.

selectObject() - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder

Returns the faces on which to perform curvature analysis.

selectObject() - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder

Returns the selected objects
License requirements: None.

selectObject(String, String, Selection.SelectionScope, boolean, boolean) - Method in interface nxopen.Selection

Deprecated.

Deprecated in NX8.0.0. Use Selection.selectTaggedObject(java.lang.String, java.lang.String, nxopen.Selection.SelectionScope, boolean, boolean) instead

selectObject(String, String, Selection.SelectionScope, Selection.SelectionAction, boolean, boolean, Selection.MaskTriple[]) - Method in interface nxopen.Selection

Deprecated.

Deprecated in NX8.0.0. Use Selection.selectTaggedObject(java.lang.String, java.lang.String, nxopen.Selection.SelectionScope, boolean, boolean) instead

selectObject(String, String, Selection.SelectionScope, boolean, Selection.SelectionType[]) - Method in interface nxopen.Selection

Deprecated.

Deprecated in NX8.0.0. Use Selection.selectTaggedObject(java.lang.String, java.lang.String, nxopen.Selection.SelectionScope, boolean, boolean) instead

SelectObject - Interface in nxopen

Represents a single object selection.

selectObject() - Method in interface nxopen.tooling.BlankNestingBuilder

Returns the selected entities making up the blank to be nested.

SelectObject.FilterType - Class in nxopen.blockstyler

Indicates the general filter type for selection.

SelectObject.ValueData - Class in nxopen

This class holds the data returned from SelectObject.getValue()

SelectObject.ValueWithCaeSetObjectInfoData - Class in nxopen

This class holds the data returned from SelectObject.getValue()

SelectObject.ValueWithSnapData - Class in nxopen

This class holds the data returned from SelectObject.getValue()

SelectObjectData() - Constructor for class nxopen.Selection.SelectObjectData

selectObjectList() - Method in interface nxopen.geometricutilities.SelectionList

Returns the list of geometries
License requirements: None.

SelectObjectList - Interface in nxopen

Represents a list of objects on a selection list.

selectObjectList() - Method in interface nxopen.weld.CharacteristicsSelectionBuilder

Returns the selection object containing data that is to be attributed.

selectObjects() - Method in interface nxopen.drafting.MoveToDrawingViewBuilder

Returns the select objects from the current sheet
License requirements: None.

selectObjects(String, String, Selection.SelectionScope, boolean, boolean) - Method in interface nxopen.Selection

Deprecated.

Deprecated in NX8.0.0. Use Selection.selectTaggedObjects(java.lang.String, java.lang.String, nxopen.Selection.SelectionScope, boolean, boolean) instead

selectObjects(String, String, Selection.SelectionScope, Selection.SelectionAction, boolean, boolean, Selection.MaskTriple[]) - Method in interface nxopen.Selection

Deprecated.

Deprecated in NX8.0.0. Use Selection.selectTaggedObject(java.lang.String, java.lang.String, nxopen.Selection.SelectionScope, boolean, boolean) instead

selectObjects(String, String, Selection.SelectionScope, boolean, Selection.SelectionType[]) - Method in interface nxopen.Selection

Deprecated.

Deprecated in NX8.0.0. Use Selection.selectTaggedObject(java.lang.String, java.lang.String, nxopen.Selection.SelectionScope, boolean, boolean) instead

SelectObjectsData() - Constructor for class nxopen.Selection.SelectObjectsData

selectObjectsToConvert() - Method in interface nxopen.drawings.ConvertDraftingContentsBuilder

Returns the select objects to convert
License requirements: None.

selectOffsetSpreadsheet() - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder

Returns the super offset spreadsheet
License requirements: None.

selectOption() - Method in interface nxopen.features.CopyPasteBuilder

Returns the parent select option.

SelectOrdinateDimensionList - Interface in nxopen.annotations

Represents a list of objects on a selection list.

selectOrientationLine() - Method in interface nxopen.features.shipdesign.SteelSupportBuilder

Returns the orientation line (only used with "SpecifyLine" creation method)
License requirements: None.

selectOuterBoundary() - Method in interface nxopen.routing.PlatformCreatorBuilder

Returns the platform outer boundary section
License requirements: routing_platform ("Routing Platform")
.

selectOutline() - Method in interface nxopen.linedesigner.FloorEquipmentBuilder

Returns the select outline
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

selectOutline() - Method in interface nxopen.linedesigner.HoleFeatureBuilder

Returns the select outline
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

selectPad() - Method in interface nxopen.tooling.BackingPadBuilder

Returns the select backing pad feature to delete
License requirements: None.

selectParameters(String, Tag) - Method in interface nxopen.uf.UFUi

Refer to UF_UI_select_parameters for documentation.

SelectParametersData() - Constructor for class nxopen.uf.UFUi.SelectParametersData

selectParentComponent() - Method in interface nxopen.annotations.TableColumnBuilder

Returns the select parent component.

selectParentPartOcc() - Method in interface nxopen.tooling.CopySolidBuilder

Returns the parent part occurrence of the part which collects the copied solid bodies.

selectPart() - Method in interface nxopen.features.shipdesign.TransitionBuilder

Returns the ship basic design part
License requirements: nx_ship_basic ("Ship Basic Design")
.

selectPart() - Method in interface nxopen.features.shipdesign.ValidateModelBuilder

Returns the ship basic design part
License requirements: nx_ship_basic ("Ship Basic Design")
.

SelectPart - Interface in nxopen

Represents a single object selection.

selectPart() - Method in interface nxopen.tooling.ClearanceManagementBuilder

Returns the selected part.

SelectPart.ValueData - Class in nxopen

This class holds the data returned from SelectPart.getValue()

SelectPart.ValueWithCaeSetObjectInfoData - Class in nxopen

This class holds the data returned from SelectPart.getValue()

SelectPart.ValueWithSnapData - Class in nxopen

This class holds the data returned from SelectPart.getValue()

SelectPartBuilder - Interface in nxopen.features.shipdesign

Represents a SelectPartBuilder .

SelectPartBuilder.Types - Class in nxopen.features.shipdesign

Type.

SelectPartFromList - Interface in nxopen.blockstyler

Represents a Select Part From List block .

SelectPartList - Interface in nxopen

Represents a list of objects on a selection list.

SelectPartModule - Interface in nxopen.features

Represents a single object selection.

SelectPartModule.ValueData - Class in nxopen.features

This class holds the data returned from SelectPartModule.getValue()

SelectPartModule.ValueWithCaeSetObjectInfoData - Class in nxopen.features

This class holds the data returned from SelectPartModule.getValue()

SelectPartModule.ValueWithSnapData - Class in nxopen.features

This class holds the data returned from SelectPartModule.getValue()

selectParts() - Method in interface nxopen.issue.SnapshotSubsetBuilder

Returns the select parts which will be collected into issue snapshot subset.

selectPartSymbol(String, String) - Method in interface nxopen.annotations.BaseCustomSymbolBuilder

Selects part custom symbol
License requirements: drafting ("DRAFTING")
.

selectPassThrougCurves() - Method in interface nxopen.features.FillHoleBuilder

Returns the pass through curves
License requirements: None.

selectPhysics() - Method in interface nxopen.mechatronics.ExternalConnectionBuilder

Returns the select physics.

SelectPhysicsConstraint - Interface in nxopen.mechatronics

Represents a single object selection.

SelectPhysicsConstraint.ValueData - Class in nxopen.mechatronics

This class holds the data returned from SelectPhysicsConstraint.getValue()

SelectPhysicsConstraint.ValueWithCaeSetObjectInfoData - Class in nxopen.mechatronics

This class holds the data returned from SelectPhysicsConstraint.getValue()

SelectPhysicsConstraint.ValueWithSnapData - Class in nxopen.mechatronics

This class holds the data returned from SelectPhysicsConstraint.getValue()

SelectPhysicsJoint - Interface in nxopen.mechatronics

Represents a single object selection.

SelectPhysicsJoint.ValueData - Class in nxopen.mechatronics

This class holds the data returned from SelectPhysicsJoint.getValue()

SelectPhysicsJoint.ValueWithCaeSetObjectInfoData - Class in nxopen.mechatronics

This class holds the data returned from SelectPhysicsJoint.getValue()

SelectPhysicsJoint.ValueWithSnapData - Class in nxopen.mechatronics

This class holds the data returned from SelectPhysicsJoint.getValue()

selectPhysicsObject() - Method in interface nxopen.mechatronics.ProxyObjectBuilder

Returns the select physics objects that are encapsulated in the proxy object
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

selectPlane() - Method in interface nxopen.die.DiePlaneBuilder

Returns the selected plane
License requirements: None.

selectPlane() - Method in interface nxopen.geometricutilities.FacePlaneSelectionBuilder

Returns the select plane
License requirements: None.

selectPlateToSplit() - Method in interface nxopen.tooling.DieBaseBuilder

Returns the selected die plates.

SelectPneumaticCylinderList - Interface in nxopen.mechatronics

Represents a list of objects on a selection list.

selectPoint() - Method in interface nxopen.cam.InspectionEdgePointFeatureBuilder

Returns the selected edge point
License requirements: None.

selectPoint() - Method in interface nxopen.cam.InspectionPointFeatureBuilder

Returns the selected point
License requirements: None.

selectPoint() - Method in interface nxopen.drafting.MoveToDrawingViewBuilder

Returns the select point to calculate the new created drawing view's reference point
License requirements: None.

selectPoint() - Method in interface nxopen.linedesigner.RailOpeningFeatureBuilder

Returns the select point
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

SelectPoint - Interface in nxopen

Represents a single object selection.

selectPoint() - Method in interface nxopen.tooling.SectionLineCreationBuilder

Returns the pnt select point
License requirements: None.

selectPoint() - Method in interface nxopen.tooling.SlugRetentionBuilder

Returns the select point
License requirements: None.

SelectPoint.ValueData - Class in nxopen

This class holds the data returned from SelectPoint.getValue()

SelectPoint.ValueWithCaeSetObjectInfoData - Class in nxopen

This class holds the data returned from SelectPoint.getValue()

SelectPoint.ValueWithSnapData - Class in nxopen

This class holds the data returned from SelectPoint.getValue()

selectPointCollection(String, boolean) - Method in interface nxopen.uf.UFUi

Refer to UF_UI_select_point_collection for documentation.

SelectPointCollectionData() - Constructor for class nxopen.uf.UFUi.SelectPointCollectionData

SelectPointList - Interface in nxopen

Represents a list of objects on a selection list.

selectPoints() - Method in interface nxopen.tooling.UndersizeBuilder

Deprecated.

Deprecated in NX10.0.0. Use Tooling.UndersizeBuilder#orbitPointList instead.

selectPointsObject() - Method in interface nxopen.weld.JointmarkBuilder

Returns the selected objects for Points
License requirements: ugweld ("UG WELD")
.

selectPoles(int, int[], Point[]) - Method in interface nxopen.geometricutilities.ControlPoleManagerData

Adds new selected pole
License requirements: studio_free_form ("STUDIO FREE FORM")
.

SelectPort - Interface in nxopen.routing

Represents a single object selection.

SelectPort.ValueData - Class in nxopen.routing

This class holds the data returned from SelectPort.getValue()

SelectPort.ValueWithCaeSetObjectInfoData - Class in nxopen.routing

This class holds the data returned from SelectPort.getValue()

SelectPort.ValueWithSnapData - Class in nxopen.routing

This class holds the data returned from SelectPort.getValue()

selectPreferenceNodesList() - Method in interface nxopen.cae.modelcheck.DuplicateNodesCheckBuilder

Returns the preference nodes select list for keep selected and remove selected options
License requirements: nx_masterfem ("Finite Element Modeling")
.

selectPreviousGouge() - Method in interface nxopen.cam.ToolPathEditorBuilder

Select previous gouge
License requirements: cam_base ("CAM BASE")
.

selectPrimaryParameter(String, String) - Method in interface nxopen.tooling.SpreadsheetData

Change the primary parameter of the spreadsheet
License requirements: None.

selectProduct() - Method in interface nxopen.tooling.ChangeoverManagementBuilder

Returns the selection of product for which to create changeover.

selectProfile() - Method in interface nxopen.tooling.ProfileSplitBuilder

Returns the selected profile
License requirements: None.

selectProfileBody() - Method in interface nxopen.features.shipdesign.SteelCollarPlateBuilder

Returns the select profile body.

selectProjectionFaces() - Method in interface nxopen.cam.InspectionCircleFeatureBuilder

Returns the button used to select faces to project the circle to
License requirements: None.

selectProjectionFaces() - Method in interface nxopen.cam.InspectionCparlnFeatureBuilder

Returns the selector for projection faces
License requirements: None.

selectProjectionFaces() - Method in interface nxopen.cam.InspectionPointFeatureBuilder

Returns the selected projection faces
License requirements: None.

selectPropagatedExpressions() - Method in interface nxopen.linedesigner.TypedConnectorFeatureBuilder

TODO: fill in a description for this
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

selectRampFeature() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder

Returns the select ramp feature
License requirements: None.

selectReference1() - Method in interface nxopen.features.shipdesign.Cutout2Builder

Returns the reference1 (used only for Face2Lines, Faces2Surfaces, and FacesBetweenSurfacesSurface)
License requirements: None.

selectReference2() - Method in interface nxopen.features.shipdesign.Cutout2Builder

Returns the reference2 (used only for Face2Lines, Faces2Surfaces, and FacesBetweenSurfacesSurface)
License requirements: None.

selectReference3() - Method in interface nxopen.features.shipdesign.Cutout2Builder

Returns the reference3 (used only for FacesBetweenSurfacesSurface)
License requirements: None.

selectReferenceBodies() - Method in interface nxopen.FlatteningBuilder

Deprecated.

Deprecated in NX11.0.0. Use FlatteningAndFormingBuilder instead.

selectReferenceCurves() - Method in interface nxopen.FlatteningBuilder

Deprecated.

Deprecated in NX11.0.0. Use FlatteningAndFormingBuilder instead.

selectReferenceFaces() - Method in interface nxopen.FlatteningBuilder

Deprecated.

Deprecated in NX11.0.0. Use FlatteningAndFormingBuilder instead.

selectReferenceFeature() - Method in interface nxopen.cam.InspectionPathBuilder

Returns the selector for the reference feature
License requirements: None.

selectRegion(Point3d) - Method in interface nxopen.SketchAssociativeTrimBuilder

The function sets help point for region select.

SelectRegionBuilder - Interface in nxopen.drawings

Creates the builder for associating the objects from the screen
To create a new instance of this class, use DrawingRegionCollection.createSelectRegionBuilder()

Created in NX8.0.0

selectRegionFaces() - Method in interface nxopen.tooling.MWDefineRegionsBuilder

Returns the region faces for defining region
License requirements: None.

selectRemovedGroup() - Method in interface nxopen.cae.GroupByBoundaryBuilder

Returns the elements removed as ribs
License requirements: None.

selectReplacementFace() - Method in interface nxopen.features.StepBuilder

Returns the selected replacement face
License requirements: None.

selectReuseItem() - Method in interface nxopen.tooling.SelectReuseLibraryListItemBuilder

Returns the selected reuse item list.

SelectReuseLibraryItemBuilder - Interface in nxopen.tooling

Select a part from the reuse library .

SelectReuseLibraryListBuilder - Interface in nxopen.tooling

Select a list of objects from the reuse library .

SelectReuseLibraryListItemBuilder - Interface in nxopen.tooling

Select reuse library list item .

SelectReuseLibraryListItemBuilderList - Interface in nxopen.tooling

Represents a list of objects.

SelectRigidBody - Interface in nxopen.mechatronics

Represents a single object selection.

SelectRigidBody.ValueData - Class in nxopen.mechatronics

This class holds the data returned from SelectRigidBody.getValue()

SelectRigidBody.ValueWithCaeSetObjectInfoData - Class in nxopen.mechatronics

This class holds the data returned from SelectRigidBody.getValue()

SelectRigidBody.ValueWithSnapData - Class in nxopen.mechatronics

This class holds the data returned from SelectRigidBody.getValue()

SelectRoad - Interface in nxopen.motion

Represents a single object selection.

SelectRoad.ValueData - Class in nxopen.motion

This class holds the data returned from SelectRoad.getValue()

SelectRoad.ValueWithCaeSetObjectInfoData - Class in nxopen.motion

This class holds the data returned from SelectRoad.getValue()

SelectRoad.ValueWithSnapData - Class in nxopen.motion

This class holds the data returned from SelectRoad.getValue()

selectRotationLetter() - Method in interface nxopen.drawings.ViewSectionLineBuilder

Returns the selected objected should be note type only which is the desired location of the rotation point of the section line specified
License requirements: None.

selectRoutingObjects(String, String, int, int, int) - Method in interface nxopen.uf.UFUi

Refer to UF_UI_select_routing_objects for documentation.

SelectRoutingObjectsData() - Constructor for class nxopen.uf.UFUi.SelectRoutingObjectsData

selectRpoDimensions(String, Tag) - Method in interface nxopen.uf.UFUi

Refer to UF_UI_select_rpo_dimensions for documentation.

SelectRpoDimensionsData() - Constructor for class nxopen.uf.UFUi.SelectRpoDimensionsData

SelectRun - Interface in nxopen.routing

Represents a single object selection.

SelectRun.ValueData - Class in nxopen.routing

This class holds the data returned from SelectRun.getValue()

SelectRun.ValueWithCaeSetObjectInfoData - Class in nxopen.routing

This class holds the data returned from SelectRun.getValue()

SelectRun.ValueWithSnapData - Class in nxopen.routing

This class holds the data returned from SelectRun.getValue()

selectScrap() - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder

Returns the select scrap
License requirements: None.

selectScrap() - Method in interface nxopen.tooling.DieInsertBuilder

Returns the select scraps for pierce insert design.

selectScrap() - Method in interface nxopen.tooling.PiercingInsertBuilder

Returns the select scraps for pierce insert design.

selectScrap() - Method in interface nxopen.tooling.PunchInsertBuilder

Returns the select scraps for punch insert design.

selectScrapCutters() - Method in interface nxopen.tooling.DieEngTrimTaskBuilder

Returns the selected scrap cutters.

selectScrapOrInsert() - Method in interface nxopen.tooling.PiercingInsertBuilder

Returns the select scrap or insert for association update.

selectScrapOrInsert() - Method in interface nxopen.tooling.PiercingInsertMiniToolsBuilder

Returns the select scrap or insert for association update.

selectScreenPosition(String) - Method in interface nxopen.Selection

Select screen position on graphics display
License requirements: None.

SelectScreenPositionData() - Constructor for class nxopen.Selection.SelectScreenPositionData

selectScrewSize(int, double, double, boolean) - Method in interface nxopen.tooling.FastenerAssy

Selects the screw size
License requirements: None.

selectSecondEdgeFace(DisplayableObject, DisplayableObject) - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder

Selection of second edge or face
License requirements: gateway ("UG GATEWAY")
.

selectSecondTri() - Method in interface nxopen.cae.CombineTrisBuilder

Returns the selected second tri element
License requirements: None.

selectSection() - Method in interface nxopen.die.AddSurfBuilder

Returns the addendum section feature to define the shape of the addendum surface.

SelectSectionLine - Interface in nxopen.drawings

Represents a single object selection.

SelectSectionLine.ValueData - Class in nxopen.drawings

This class holds the data returned from SelectSectionLine.getValue()

SelectSectionLine.ValueWithCaeSetObjectInfoData - Class in nxopen.drawings

This class holds the data returned from SelectSectionLine.getValue()

SelectSectionLine.ValueWithSnapData - Class in nxopen.drawings

This class holds the data returned from SelectSectionLine.getValue()

selectSectionOri() - Method in interface nxopen.cae.BeamEADBuilder

Returns the get selection ori operator gets section orientaion value
License requirements: nx_masterfem ("Finite Element Modeling")
.

selectSeedFaces() - Method in interface nxopen.tooling.MWSearchRegionBuilder

Returns the select seed faces
License requirements: None.

selectShankProfile() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder

Returns the selected shank profile.

selectSheetBodies() - Method in interface nxopen.tooling.MWDefineSheetsBuilder

Returns the select sheets is for selecting region, parting and patched sheets to form a new sheet
License requirements: None.

selectSheetBody() - Method in interface nxopen.tooling.SpecialFormingBuilder

Returns the select sheet body
License requirements: None.

SelectSketch - Interface in nxopen

Represents a single object selection.

selectSketch() - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder

Returns the select sketch
License requirements: None.

SelectSketch.ValueData - Class in nxopen

This class holds the data returned from SelectSketch.getValue()

SelectSketch.ValueWithCaeSetObjectInfoData - Class in nxopen

This class holds the data returned from SelectSketch.getValue()

SelectSketch.ValueWithSnapData - Class in nxopen

This class holds the data returned from SelectSketch.getValue()

selectSketchDimensions(String, Tag) - Method in interface nxopen.uf.UFUi

Refer to UF_UI_select_sketch_dimensions for documentation.

SelectSketchDimensionsData() - Constructor for class nxopen.uf.UFUi.SelectSketchDimensionsData

SelectSmartObject - Interface in nxopen

Represents a single object selection.

SelectSmartObject.ValueData - Class in nxopen

This class holds the data returned from SelectSmartObject.getValue()

SelectSmartObject.ValueWithCaeSetObjectInfoData - Class in nxopen

This class holds the data returned from SelectSmartObject.getValue()

SelectSmartObject.ValueWithSnapData - Class in nxopen

This class holds the data returned from SelectSmartObject.getValue()

selectSphere() - Method in interface nxopen.cam.InspectionSphereFeatureBuilder

Returns the selected sphere
License requirements: None.

SelectSpline - Interface in nxopen

Represents a single object selection.

SelectSpline.ValueData - Class in nxopen

This class holds the data returned from SelectSpline.getValue()

SelectSpline.ValueWithCaeSetObjectInfoData - Class in nxopen

This class holds the data returned from SelectSpline.getValue()

SelectSpline.ValueWithSnapData - Class in nxopen

This class holds the data returned from SelectSpline.getValue()

SelectSplineList - Interface in nxopen

Represents a list of objects on a selection list.

selectSpreadsheet() - Method in interface nxopen.tooling.HoleDatumSymbolBuilder

Returns the select spreadsheet
License requirements: None.

selectStandardSetsSpreadsheet() - Method in interface nxopen.tooling.ValidCheckBuilder

Returns the standard sets spreadsheet
License requirements: None.

selectStartLimit() - Method in interface nxopen.features.shipdesign.EdgeCutBuilder

Returns the select start limit.

selectStartPlane() - Method in interface nxopen.tooling.DieEngTrimTaskBuilder

Returns the selected start plane.

selectStartTrim() - Method in interface nxopen.features.shipdesign.SteelVentHolesBuilder

Returns the select start trim - used to trim the start of the section guide.

selectStartTrim() - Method in interface nxopen.features.shipdesign.VentilationHoles2Builder

Returns the select start trim
License requirements: None.

selectStepWallReplmFace1() - Method in interface nxopen.features.StepBuilder

Returns the selected step wall replacement face 1
License requirements: None.

selectStepWallReplmFace2() - Method in interface nxopen.features.StepBuilder

Returns the selected step wall replacement face 2
License requirements: None.

SelectStock - Interface in nxopen.routing

Represents a single object selection.

SelectStock.ValueData - Class in nxopen.routing

This class holds the data returned from SelectStock.getValue()

SelectStock.ValueWithCaeSetObjectInfoData - Class in nxopen.routing

This class holds the data returned from SelectStock.getValue()

SelectStock.ValueWithSnapData - Class in nxopen.routing

This class holds the data returned from SelectStock.getValue()

selectSubDieBase() - Method in interface nxopen.tooling.DieBaseBuilder

Returns the selected sub die base part.

SelectSubdivisionBodyList - Interface in nxopen.features.subdivision

Represents a list of objects on a selection list.

selectSubHoleFaceAutomatically() - Method in interface nxopen.tooling.FaceColorManagementBuilder

Returns the select sub-hole face automatically option
License requirements: None.

selectSubTypeAsString() - Method in interface nxopen.blockstyler.SelectElement

Returns the SelectSubType as string
License requirements: None.

selectSymbol(String) - Method in interface nxopen.annotations.BaseCustomSymbolBuilder

Selects custom symbol
License requirements: drafting ("DRAFTING")
.

selectSymmetryReference(NXObject) - Method in interface nxopen.features.CurveFinderBuilder

Selects entity for symmetry reference
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

SelectSystemObject - Interface in nxopen.mechatronics

Represents a single object selection.

SelectSystemObject.ValueData - Class in nxopen.mechatronics

This class holds the data returned from SelectSystemObject.getValue()

SelectSystemObject.ValueWithCaeSetObjectInfoData - Class in nxopen.mechatronics

This class holds the data returned from SelectSystemObject.getValue()

SelectSystemObject.ValueWithSnapData - Class in nxopen.mechatronics

This class holds the data returned from SelectSystemObject.getValue()

SelectTableSectionList - Interface in nxopen.annotations

Represents a list of objects on a selection list.

SelectTagFormObject - Interface in nxopen.mechatronics

Represents a single object selection.

SelectTagFormObject.ValueData - Class in nxopen.mechatronics

This class holds the data returned from SelectTagFormObject.getValue()

SelectTagFormObject.ValueWithCaeSetObjectInfoData - Class in nxopen.mechatronics

This class holds the data returned from SelectTagFormObject.getValue()

SelectTagFormObject.ValueWithSnapData - Class in nxopen.mechatronics

This class holds the data returned from SelectTagFormObject.getValue()

selectTaggedObject(String, String, Selection.SelectionScope, boolean, boolean) - Method in interface nxopen.Selection

Select single tagged object.

selectTaggedObject(String, String, Selection.SelectionScope, Selection.SelectionAction, boolean, boolean, Selection.MaskTriple[]) - Method in interface nxopen.Selection

Select single tagged object using filter defined by mask triples.

selectTaggedObject(String, String, Selection.SelectionScope, boolean, Selection.SelectionType[]) - Method in interface nxopen.Selection

Select single tagged object using filter defined by selection type.

SelectTaggedObject - Interface in nxopen

Represents a single object selection.

SelectTaggedObject.ValueData - Class in nxopen

This class holds the data returned from SelectTaggedObject.getValue()

SelectTaggedObject.ValueWithCaeSetObjectInfoData - Class in nxopen

This class holds the data returned from SelectTaggedObject.getValue()

SelectTaggedObject.ValueWithSnapData - Class in nxopen

This class holds the data returned from SelectTaggedObject.getValue()

SelectTaggedObjectData() - Constructor for class nxopen.Selection.SelectTaggedObjectData

SelectTaggedObjectList - Interface in nxopen

Represents a list of objects on a selection list.

selectTaggedObjects(String, String, Selection.SelectionScope, boolean, boolean) - Method in interface nxopen.Selection

Select tagged objects.

selectTaggedObjects(String, String, Selection.SelectionScope, Selection.SelectionAction, boolean, boolean, Selection.MaskTriple[]) - Method in interface nxopen.Selection

Select tagged objects using filter defined by mask triples.

selectTaggedObjects(String, String, Selection.SelectionScope, boolean, Selection.SelectionType[]) - Method in interface nxopen.Selection

Select tagged objects using filter defined by selection type.

SelectTaggedObjectsData() - Constructor for class nxopen.Selection.SelectTaggedObjectsData

selectTarget() - Method in interface nxopen.features.shipdesign.PlateChamferBuilder

Returns the select target
License requirements: None.

selectTarget() - Method in interface nxopen.tooling.PocketBuilder

Returns the target part selection
License requirements: None.

selectTargetFace() - Method in interface nxopen.features.shipdesign.Cutout2Builder

Returns the select target face
License requirements: None.

selectTargetFace() - Method in interface nxopen.features.shipdesign.EdgeCutBuilder

Returns the select target face.

selectTargetFace() - Method in interface nxopen.features.shipdesign.ShipCutoutBuilder

Returns the select Target Face.

selectTargetFace() - Method in interface nxopen.features.shipdesign.ShipEndCutBuilder

Returns the select target face
License requirements: None.

selectTargetFace() - Method in interface nxopen.features.shipdesign.SteelVentHolesBuilder

Returns the select target face.

selectTargetFace() - Method in interface nxopen.features.shipdesign.VentilationHoles2Builder

Returns the select target face
License requirements: None.

selectTargetFace() - Method in interface nxopen.features.shipdesign.WeldCutBuilder

Returns the selection object for the target face.

selectTargetFaces() - Method in interface nxopen.features.shipdesign.Cutout2Builder

Returns the target faces (used only for: Faces2Surfaces, FacesBetweenSurfacesSurface, and FacesCentered)
License requirements: None.

selectTargetFaces() - Method in interface nxopen.FlatteningBuilder

Deprecated.

Deprecated in NX11.0.0. Use FlatteningAndFormingBuilder instead.

selectTcResultFileToImport(String[], int) - Method in interface nxopen.uf.UFUi

Refer to UF_UI_select_tc_result_file_to_import for documentation.

SelectTcResultFileToImportData() - Constructor for class nxopen.uf.UFUi.SelectTcResultFileToImportData

selectText(int) - Method in interface nxopen.annotations.BaseCustomSymbolBuilder

Selects the node index of custom symbol text
License requirements: drafting ("DRAFTING")
.

selectThinnerPlate() - Method in interface nxopen.features.shipdesign.PlateChamferBuilder

Returns the select thinner plate
License requirements: None.

selectTic(int) - Method in interface nxopen.annotations.AddTicBuilder

Stores index of the tic for adding the tic
License requirements: nx_ship_drafting ("Ship Drafting")
.

SelectTirePropertyBasic - Interface in nxopen.motion

Represents a single object selection.

SelectTirePropertyBasic.ValueData - Class in nxopen.motion

This class holds the data returned from SelectTirePropertyBasic.getValue()

SelectTirePropertyBasic.ValueWithCaeSetObjectInfoData - Class in nxopen.motion

This class holds the data returned from SelectTirePropertyBasic.getValue()

SelectTirePropertyBasic.ValueWithSnapData - Class in nxopen.motion

This class holds the data returned from SelectTirePropertyBasic.getValue()

SelectTirePropertyCd - Interface in nxopen.motion

Represents a single object selection.

SelectTirePropertyCd.ValueData - Class in nxopen.motion

This class holds the data returned from SelectTirePropertyCd.getValue()

SelectTirePropertyCd.ValueWithCaeSetObjectInfoData - Class in nxopen.motion

This class holds the data returned from SelectTirePropertyCd.getValue()

SelectTirePropertyCd.ValueWithSnapData - Class in nxopen.motion

This class holds the data returned from SelectTirePropertyCd.getValue()

SelectTirePropertyFt - Interface in nxopen.motion

Represents a single object selection.

SelectTirePropertyFt.ValueData - Class in nxopen.motion

This class holds the data returned from SelectTirePropertyFt.getValue()

SelectTirePropertyFt.ValueWithCaeSetObjectInfoData - Class in nxopen.motion

This class holds the data returned from SelectTirePropertyFt.getValue()

SelectTirePropertyFt.ValueWithSnapData - Class in nxopen.motion

This class holds the data returned from SelectTirePropertyFt.getValue()

SelectTirePropertyMotorcycle - Interface in nxopen.motion

Represents a single object selection.

SelectTirePropertyMotorcycle.ValueData - Class in nxopen.motion

This class holds the data returned from SelectTirePropertyMotorcycle.getValue()

SelectTirePropertyMotorcycle.ValueWithCaeSetObjectInfoData - Class in nxopen.motion

This class holds the data returned from SelectTirePropertyMotorcycle.getValue()

SelectTirePropertyMotorcycle.ValueWithSnapData - Class in nxopen.motion

This class holds the data returned from SelectTirePropertyMotorcycle.getValue()

SelectTirePropertyNonInertial - Interface in nxopen.motion

Represents a single object selection.

SelectTirePropertyNonInertial.ValueData - Class in nxopen.motion

This class holds the data returned from SelectTirePropertyNonInertial.getValue()

SelectTirePropertyNonInertial.ValueWithCaeSetObjectInfoData - Class in nxopen.motion

This class holds the data returned from SelectTirePropertyNonInertial.getValue()

SelectTirePropertyNonInertial.ValueWithSnapData - Class in nxopen.motion

This class holds the data returned from SelectTirePropertyNonInertial.getValue()

SelectTirePropertyTno - Interface in nxopen.motion

Represents a single object selection.

SelectTirePropertyTno.ValueData - Class in nxopen.motion

This class holds the data returned from SelectTirePropertyTno.getValue()

SelectTirePropertyTno.ValueWithCaeSetObjectInfoData - Class in nxopen.motion

This class holds the data returned from SelectTirePropertyTno.getValue()

SelectTirePropertyTno.ValueWithSnapData - Class in nxopen.motion

This class holds the data returned from SelectTirePropertyTno.getValue()

selectTool() - Method in interface nxopen.features.shipdesign.PlateChamferBuilder

Returns the select tool
License requirements: None.

selectTool() - Method in interface nxopen.tooling.PocketBuilder

Returns the tool part selection
License requirements: None.

selectToolFlag() - Method in interface nxopen.cam.OperationBuilder

Returns the user selected tool
License requirements: None.

selectTopParts() - Method in interface nxopen.weld.WeldBeadBuilder

Returns the collector containing the primary bodies the bead is attached to.

selectTrackingPoint(Tag, String) - Method in interface nxopen.uf.UFOper

Refer to UF_OPER_select_tracking_point for documentation.

selectTransformationObjects() - Method in interface nxopen.FlatteningBuilder

Deprecated.

Deprecated in NX11.0.0. Use FlatteningAndFormingBuilder instead.

selectTranslateObject() - Method in interface nxopen.weld.JointmarkBuilder

Returns the selected objects to translate.

selectTrimBounds() - Method in interface nxopen.tooling.DieEngTrimTaskBuilder

Returns the selected trim bounds.

selectTrimFace() - Method in interface nxopen.features.shipdesign.CustomBracketBuilder

Returns the select trim face.

selectTypes() - Method in interface nxopen.tooling.PocketBuilder

Returns the types of tool to select
License requirements: None.

selectUserDefinedDieInsertForEdit() - Method in interface nxopen.tooling.DieInsertBuilder

Returns the select user defined insert to edit
License requirements: None.

selectUserDefinedDieInsertForEdit() - Method in interface nxopen.tooling.PiercingInsertBuilder

Returns the selected user defined die insert to edit.

selectUV() - Method in interface nxopen.features.SnipSurfaceBuilder

Returns the UV flag
License requirements: None.

selectVector() - Method in interface nxopen.tooling.DieInsertBuilder

Returns the select vector
License requirements: None.

selectVector() - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder

Returns the select vector
License requirements: None.

selectView() - Method in interface nxopen.drafting.SmashDrawingViewBuilder

Returns the select drawing views to smash
License requirements: None.

selectView() - Method in interface nxopen.drawings.SheetZoneReferenceBuilder

Returns the select view
License requirements: None.

selectView() - Method in interface nxopen.drawings.ViewOrientationBuilder

Returns the select view
License requirements: None.

SelectView - Interface in nxopen

Represents a single object selection.

selectView() - Method in interface nxopen.tooling.HoleDatumSymbolBuilder

Returns the select view
License requirements: None.

selectView() - Method in interface nxopen.tooling.HoleManufacturingNoteBuilder

Returns the selected view
License requirements: None.

SelectView.ValueData - Class in nxopen

This class holds the data returned from SelectView.getValue()

SelectView.ValueWithCaeSetObjectInfoData - Class in nxopen

This class holds the data returned from SelectView.getValue()

SelectView.ValueWithSnapData - Class in nxopen

This class holds the data returned from SelectView.getValue()

selectWeldFace() - Method in interface nxopen.cae.MeshControlBuilder

Returns the select weld face
License requirements: nx_masterfem ("Finite Element Modeling")
.

selectWindshield() - Method in interface nxopen.features.vehicledesign.WindshieldDatumBuilder

Returns the windshield collector which the v points will be projected onto.

selectWorkPieceBody() - Method in interface nxopen.tooling.WorkpieceBuilder

Returns the work piece body selection
License requirements: None.

SELF_CONTAINED - Static variable in class nxopen.tooling.AssemblyDrawingBuilder.DrawingTypes

SELF_CONTAINED - Static variable in class nxopen.tooling.CompDrawingBuilder.DrawingType

with self-contained drawing

SELF_CONTAINED - Static variable in class nxopen.tooling.EjectorTableBuilder.DrawingType

self contained drawing

SELF_CONTAINED - Static variable in class nxopen.tooling.EWDraftingBuilder.DrawingOption

self contained

SELF_REFERENCED - Static variable in class nxopen.assemblies.productinterface.InterfaceObject.InvalidState

product interface references itself

SELF_REFIT - Static variable in class nxopen.uf.UFModl.QuiltType

selFace() - Method in interface nxopen.tooling.ReplaceSolidBuilder

Returns the selected replacement face.

selfHidden() - Method in interface nxopen.drawings.HiddenLinesViewStyle

Returns the status of self hidden.

selfHidden() - Method in interface nxopen.drawings.ViewStyleHiddenLinesBuilder

Returns the self hidden toggle on the HIDDEN LINES tab of the View Style Dialog
License requirements: None.

selfHidden() - Method in interface nxopen.preferences.HiddenLinesViewPreferences

Returns the status of self hidden.

selfIntersection() - Method in interface nxopen.cam.MillCutParameters

Returns the Standard Drive Self-Intersect Status
License requirements: None.

selfIntersectionChecking() - Method in interface nxopen.cae.optimization.TBSSmoothBuilder

Returns the option of self-intersection checking
License requirements: None.

selfIntersections() - Method in interface nxopen.facet.CleanupFacetBodyBuilder

Returns the option to identify or repair facets of the same mesh intersecting each other
License requirements: None.

selFootType() - Method in interface nxopen.tooling.SubInsertBuilder

Returns the foot type which can be a box or a cylinder
License requirements: None.

selOutline() - Method in interface nxopen.tooling.QuickQuotationBuilder

Returns the selected outline.

selPlanarFaces() - Method in interface nxopen.tooling.DirectUnfoldBuilder

Returns the planar faces selected as the start of automatic recognition.

selPref() - Method in interface nxopen.BasePart

Returns the Display.SelPrefCollection instance belonging to this part
Created in NX3.0.0

SelPref - Interface in nxopen.display

Represents a SelPref
To obtain a instance of this class use Display.SelPrefCollection#createSelPref

Created in NX5.0.0

SelPref.FaceAnalysisViews - Class in nxopen.display

Represents the face analysis views type

SelPref.Method - Class in nxopen.display

Represents the chaining method type

SelPref.MouseGesture - Class in nxopen.display

Represents the mouse gesture type

SelPref.SelectionRadius - Class in nxopen.display

Represents the selection radius type

SelPref.SelectionRule - Class in nxopen.display

Represents the selection rule type

SelPref.ShadedViews - Class in nxopen.display

Represents the shaded views type

SelPrefCollection - Interface in nxopen.display

Represents a collection SelPref
To obtain an instance of this class, refer to BasePart

Created in NX5.0.0

selSheetBody() - Method in interface nxopen.tooling.QuickQuotationBuilder

Returns the selected sheet body.

selToFace() - Method in interface nxopen.tooling.ElectrodeCopyBuilder

Returns the selected 'to' face
License requirements: None.

selType() - Method in interface nxopen.tooling.EdgePatchBuilder

Returns the patch type of the edge patch creation.

selType() - Method in interface nxopen.tooling.ElectrodeCopyBuilder

Returns the copy type
License requirements: None.

SEMI_AUTOMATIC - Static variable in class nxopen.visualreporting.Classifier.GroupingMethodOption

Grouping is automatic but some GroupLabel s have been modified

SEMI_CIRCULAR - Static variable in class nxopen.tooling.RunnerBuilder.SectionType

Use semicircular section type.

SEMI_PIERCE_PUNCH - Static variable in class nxopen.uf.UFModl.PunchType

semiConjugateLength() - Method in interface nxopen.Hyperbola

Returns the semi-conjugate length.

semiMajor() - Method in interface nxopen.weld.WeldBeadSizeBuilder

Returns the semi the semi major size of an ellipse shaped bead.

semiMinor() - Method in interface nxopen.weld.WeldBeadSizeBuilder

Returns the semi minor size of an ellipse shaped bead.

semiTransverseLength() - Method in interface nxopen.Hyperbola

Returns the semi-transverse length.

sendLayoutsTo() - Method in interface nxopen.DxfdwgImporter

Returns the SendLayoutsTo command - this will determine the destination for the layout data
License requirements: None.

sendModelDataTo() - Method in interface nxopen.DxfdwgImporter

Returns the SendModelDataTo command - this will determine the destination for model data
License requirements: None.

sendToWorkflow(String) - Method in interface nxopen.issue.IssueContent

Sends the issue to workflow process
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.

sendToWorkflowRequests(PenetrationRequest[]) - Method in interface nxopen.features.shipdesign.PenetrationUtils

Send to Workflow the requests
License requirements: nx_penetration_mgmt ("Penetration Management")
.

sense() - Method in interface nxopen.Direction

Returns the sense of the direction.

sense - Variable in class nxopen.facet.FacetedFace.SurfaceData

Sense - Class in nxopen

Specifies sense direction .

sense - Variable in class nxopen.uf.UFCurve.ConvertConicToStdData

sense - Variable in class nxopen.uf.UFFacet.AskSurfaceDataForFaceData

sense - Variable in class nxopen.uf.UFFacet.FindEdgeInFacetData

SENSITIVE - Static variable in class nxopen.menubar.MenuButton.SensitivityStatus

The button is sensitive.

SENSITIVITY - Static variable in class nxopen.cae.optimization.TBSOptimizationSolutionBuilder.StrategyType

Uses sensitivity strategy to run optimization

sensitivity() - Method in interface nxopen.uistyler.ColorTool

Returns the sensitivity
License requirements: None.

sensitivity() - Method in interface nxopen.uistyler.GroupBox

Returns the sensitivity
License requirements: None.

sensitivity() - Method in interface nxopen.uistyler.IntegerItem

Returns the sensitivity of Integer item
License requirements: None.

sensitivity() - Method in interface nxopen.uistyler.IntegerScale

Returns the sensitivity of the dialog item.

sensitivity() - Method in interface nxopen.uistyler.LabelItem

Returns the seisitivity of the dialog item
License requirements: None.

sensitivity() - Method in interface nxopen.uistyler.MultiSelectList

Returns the senstivity
License requirements: None.

sensitivity() - Method in interface nxopen.uistyler.MultiTextBox

Returns the sensitivity of the dialog item.

sensitivity() - Method in interface nxopen.uistyler.PropertyPage

Returns the sensitivity of property page.

sensitivity() - Method in interface nxopen.uistyler.PushButton

Returns the senstivity of dialog.

sensitivity() - Method in interface nxopen.uistyler.RealItem

Returns the sensitivity
License requirements: None.

sensitivity() - Method in interface nxopen.uistyler.RealScale

Returns the sensitivity
License requirements: None.

sensitivity() - Method in interface nxopen.uistyler.RowColumn

Returns the sensitivity
License requirements: None.

sensitivity() - Method in interface nxopen.uistyler.ScrolledWindow

Returns
License requirements: None.

sensitivity() - Method in interface nxopen.uistyler.SelectionBox

Returns the sensitivity of the selection box
License requirements: None.

sensitivity() - Method in interface nxopen.uistyler.SingleSelectList

Returns the sensitivity of the single select list
License requirements: None.

sensitivity() - Method in interface nxopen.uistyler.TabControl

Returns the sensitivity of the dialog item
License requirements: None.

sensitivity() - Method in interface nxopen.uistyler.WideString

Returns the sensitivity of the wide string
License requirements: None.

Sensor - Interface in nxopen.cae.responsesimulation

Represents a Sensor
To create or edit an instance of this class, use SensorBuilder

Created in NX5.0.0

sensor() - Method in interface nxopen.cae.responsesimulation.SensorEvaluationSettingBuilder

Returns the destination sensor
License requirements: nx_response_anlys ("NX Response Analysis")
.

sensor() - Method in interface nxopen.mechatronics.ReadWriteDeviceBuilder

Returns the selected sensor CollisionSensor object.

SENSOR - Static variable in class nxopen.motion.PlantOutputBuilder.Poutype

sensor type

sensor() - Method in interface nxopen.motion.PlantOutputBuilder

Returns the sensor
License requirements: nx_motion_cosim ("NX Motion CoSimulation")
.

sensor() - Method in interface nxopen.motion.SignalChartListItem

Returns the sensor
License requirements: nx_motion_motor ("NX Motion Motor")
.

SENSOR_SELECT - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.CommandTypes

Enter a statement defining a sensor selection statement

sensorActuatorList() - Method in interface nxopen.mechatronics.ExportSensorsActuatorsBuilder

Returns the sensor actuator builder list
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

SensorBuilder - Interface in nxopen.cae.responsesimulation

Represents a SensorBuilder
To create a new instance of this class, use SensorCollection.createSensorBuilder(nxopen.cae.responsesimulation.Sensor)

Created in NX5.0.0

SensorCollection - Interface in nxopen.cae.responsesimulation

Represents a collection of response analysis sensor
To obtain an instance of this class, refer to Manager

Created in NX5.0.0

sensorCoordinateType() - Method in interface nxopen.cae.responsesimulation.SensorBuilder

Returns the sensor's coordinate type
License requirements: nx_response_anlys ("NX Response Analysis")
.

SensorCoordinateType - Class in nxopen.cae.responsesimulation

Specifies the coordinate type of Sensor

sensorDirectionX() - Method in interface nxopen.cae.responsesimulation.SensorBuilder

Returns the setting for x direction compontent of sensor.

sensorDirectionY() - Method in interface nxopen.cae.responsesimulation.SensorBuilder

Returns the setting for y direction compontent of sensor.

sensorDirectionZ() - Method in interface nxopen.cae.responsesimulation.SensorBuilder

Returns the setting for z direction compontent of sensor.

SensorEvaluationSetting - Interface in nxopen.cae.responsesimulation

Represents the parameters setting for sensor evaluation.

SensorEvaluationSettingBuilder - Interface in nxopen.cae.responsesimulation

This is a manager to the SensorEvaluationSetting class.

sensorGroup() - Method in interface nxopen.cam.InspectionCreatePathsBuilder

Returns the sensor group
License requirements: None.

sensorName() - Method in interface nxopen.cam.InspectionCmmCommandBuilder

Returns the sensor name
License requirements: None.

sensorName() - Method in interface nxopen.cam.InspectionSensorMassEditBuilder

Returns the sensor name
License requirements: None.

sensorOpLabel() - Method in interface nxopen.cam.InspectionSensorBuilder

Returns the sensor label
License requirements: None.

sensorOpName() - Method in interface nxopen.cam.InspectionCreatePathsBuilder

Returns the inspection sensor operation name
License requirements: None.

sensorOpName() - Method in interface nxopen.cam.InspectionMoveBuilder

Returns the inspection sensor operation name
License requirements: None.

sensorOpName() - Method in interface nxopen.cam.InspectionSensorBuilder

Returns the inspection sensor operation name
License requirements: None.

sensorParent() - Method in interface nxopen.die.RotorBuilder

Returns the sensor parent builder of the rotor.

sensorResultType() - Method in interface nxopen.cae.responsesimulation.SensorBuilder

Returns the sensor's result type
License requirements: nx_response_anlys ("NX Response Analysis")
.

SensorResultType - Class in nxopen.cae.responsesimulation

Specifies the result type of Sensor

sensorRotationX() - Method in interface nxopen.cae.responsesimulation.SensorBuilder

Returns the setting for x rotation compontent of sensor.

sensorRotationY() - Method in interface nxopen.cae.responsesimulation.SensorBuilder

Returns the setting for y rotation compontent of sensor.

sensorRotationZ() - Method in interface nxopen.cae.responsesimulation.SensorBuilder

Returns the setting for z rotation compontent of sensor.

sensors() - Method in interface nxopen.cae.responsesimulation.Manager

Returns the Response Dynamics sensor collection belonging to this sim part .

SensorsActuatorsListBuilder - Interface in nxopen.mechatronics

Represents a SensorsActuatorsListBuilder .

SensorsActuatorsListBuilder.ParameterData - Class in nxopen.mechatronics

Defines the parameter data.

SensorsActuatorsListBuilderList - Interface in nxopen.mechatronics

Represents a list of objects.

sensorSelectionConfigs() - Method in interface nxopen.cae.PreTestSensorSelectionControl

The sensor configuration collection .

sensorSelectionControl() - Method in interface nxopen.cae.PreTestSolution

The sensor selection configuration setup for this pre-test setup .

sensorStrategy() - Method in interface nxopen.cam.InspectionCreatePathsBuilder

Returns the sensor selection strategy
License requirements: None.

sensorStrategy() - Method in interface nxopen.cam.InspectionMethodBuilder

Returns the sensor selection strategy
License requirements: None.

sensorStrategy() - Method in interface nxopen.cam.InspectionMoveBuilder

Returns the sensor selection strategy
License requirements: None.

sensorStrategy() - Method in interface nxopen.cam.InspectionSensorMassEditBuilder

Returns the sensor strategy
License requirements: None.

sensorStrategyBuilder() - Method in interface nxopen.cam.InspectionMoveBuilder

Returns the Sensor Strategy Enum Builder
License requirements: None.

sensorTipDiameter() - Method in interface nxopen.cam.InspectionSensorBuilder

Returns the sensor tip diameter
License requirements: None.

sensorTipLength() - Method in interface nxopen.cam.InspectionSensorBuilder

Returns the sensor tip length
License requirements: None.

sensorTipLocation() - Method in interface nxopen.cam.InspectionSensorBuilder

Returns the sensor tip location method
License requirements: None.

sensorTipSize() - Method in interface nxopen.cam.InspectionSensorBuilder

Returns the sensor tip size
License requirements: None.

sensorTipType() - Method in interface nxopen.cam.InspectionSensorBuilder

Returns the sensor tip type
License requirements: None.

sensorType() - Method in interface nxopen.cae.responsesimulation.SensorBuilder

Returns the sensor's type
License requirements: nx_response_anlys ("NX Response Analysis")
.

SensorType - Class in nxopen.cae.responsesimulation

Specifies the type of Sensor

sensorType() - Method in interface nxopen.cam.InspectionSensorBuilder

Returns the sensor type
License requirements: None.

sensorVector() - Method in interface nxopen.cae.responsesimulation.SensorBuilder

Returns the user defined direction.

SEP - Static variable in class nxopen.DateItemBuilder.MonthOfYear

SEP1 - Static variable in class nxopen.cam.DmAmBuilder.AmCutPatternTypes

separate one

SEP1 - Static variable in class nxopen.cam.DmBndBuilder.BndCutPatternTypes

separate one

SEP1 - Static variable in class nxopen.cam.DmSurfBuilder.DmSurfCutPatternType

Warning

SEP2 - Static variable in class nxopen.cam.DmBndBuilder.BndCutPatternTypes

separate two

SEP2 - Static variable in class nxopen.cam.DmSurfBuilder.DmSurfCutPatternType

Retract

SEP_REQT - Static variable in class nxopen.uf.UFGdt.ModifierTypes

SEPARATE - Static variable in class nxopen.cae.xyplot.Preference.TargetGraphicWindowOption

Only shows plot graph on a separate graphic window

SEPARATE - Static variable in class nxopen.SectionCollection.LoopOption

One section is created for each loop

SEPARATE_FACE - Static variable in class nxopen.features.shipdesign.ProfileTransitionBuilder.FeatureModeType

Create web trim on target body and face plate in a separate part.

SEPARATE_FACES - Static variable in class nxopen.uf.UFSf.FaceSubdivStatus

SEPARATE_FEATURE_FOR_EACH_BODY - Static variable in class nxopen.features.ExtractFaceBuilder.FeatureOptionType

An option to create a separate extracted or linked body feature per single body

SEPARATE_FEATURE_FOR_EACH_BODY - Static variable in class nxopen.features.MirrorBodyBuilder.FeatureOptionType

An option to create a separate mirror or linked mirror body feature per single body

SEPARATE_FROM_CORNER - Static variable in class nxopen.features.EdgeBlendBuilder.Setback

Separate from corner

SEPARATE_OUTER - Static variable in class nxopen.SectionCollection.LoopOption

One section per outer loop and enclosed inner loops

SEPARATE_WEB_AND_FACE - Static variable in class nxopen.features.shipdesign.ProfileTransitionBuilder.FeatureModeType

Create in separate parts for web and face plate.

SEPARATED - Static variable in class nxopen.cae.SimLoadRecipeLbcGenerator.LbcHierarchyTypes

Separated LBCs

separator() - Method in interface nxopen.annotations.ChamferDimensionPreferences

Returns the separator type
License requirements: None.

Separator - Interface in nxopen.blockstyler

Represents a Separator block .

separator() - Method in interface nxopen.drawings.ViewSettingsBuilder

Returns the separator string
License requirements: None.

SEPARATOR - Static variable in class nxopen.menubar.ContextMenuEntry.Type

A visual divider between sections of the menu.

SEPARATOR - Static variable in class nxopen.menubar.MenuButton.Type

SEPARATOR - Static variable in class nxopen.uistyler.Dialog.ItemType

Separator - Interface in nxopen.uistyler

Represents a Separator for UI Styler .

SEPARATOR - Static variable in class nxopen.uistyler.StylerItem.ItemType

Separator item

SeqInput() - Constructor for class nxopen.uf.UFSmd.SeqInput

SeqInput(double, Tag, String, String, String) - Constructor for class nxopen.uf.UFSmd.SeqInput

seqLabels - Variable in class nxopen.uf.UFSmd.GenPrefs

SEQNO_AUTO - Static variable in class nxopen.uf.UFPath.Seqno

SEQNO_LAST_ELEMENT - Static variable in class nxopen.uf.UFPath.Seqno

SEQNO_N - Static variable in class nxopen.uf.UFPath.Seqno

SEQNO_OFF - Static variable in class nxopen.uf.UFPath.Seqno

SEQNO_ON - Static variable in class nxopen.uf.UFPath.Seqno

SeqOutput() - Constructor for class nxopen.uf.UFSmd.SeqOutput

SeqOutput(double, double, double, double, Tag, String, String, String, String, String) - Constructor for class nxopen.uf.UFSmd.SeqOutput

SEQUENCE - Static variable in class nxopen.cae.AfuData.AbscissaType

The abscissa value is a sequence and input by user.

sequence() - Method in interface nxopen.cam.BlendFinish

Returns the Sequence
License requirements: None.

sequence() - Method in interface nxopen.cam.FlowCutSteepContainment

Returns the Sequence
License requirements: cam_base ("CAM BASE")
.

Sequence - Interface in nxopen.cam

Represents Sequence Builder .

sequence() - Method in interface nxopen.cam.TurnRoughFinishTestCut

Returns the test cut sequence
License requirements: None.

SEQUENCE - Static variable in class nxopen.preferences.RoutingPart.FabricationNumbering

Sequential numbering of fabrications in the parts list.

Sequence.Types - Class in nxopen.cam

Available types for Sequencing .

SEQUENCED - Static variable in class nxopen.cae.Post.Abcissa

sequenceMethod() - Method in interface nxopen.routing.BranchPathNumberingBuilder

Returns the sequence method specified in the UI for the labels
License requirements: routing_hvac ("Routing HVAC")
.

sequenceNumber - Variable in class nxopen.uf.UFDrf.ArcInfo

sequenceNumber - Variable in class nxopen.uf.UFDrf.ArrowInfo

sequenceNumber - Variable in class nxopen.uf.UFDrf.DraftAidLine

sequenceNumber() - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. This functionality is no longer supported.

sequenceNumber() - Method in interface nxopen.weld.WeldPointBuilder

Returns the sequence number for the weld point feature.

sequenceOptimization() - Method in interface nxopen.cam.InspectionPathBuilder

Returns the path point sequence optimization setting
License requirements: None.

sequenceOptimization() - Method in interface nxopen.cam.InspectionUVGridBuilder

Returns the path point sequence optimization setting
License requirements: None.

sequences - Variable in class nxopen.uf.UFAssem.AskSequencesInPartData

SEQUENTIAL - Static variable in class nxopen.annotations.BillOfMaterialBuilder.FabricationNumberingType

SEQUENTIAL - Static variable in class nxopen.cae.CorrelModePairingBuilder.Auto

by mode numbers

SEQUENTIAL_COMPONENT - Static variable in class nxopen.assemblies.Order.Type

System defined sequential component order

SEQUENTIAL_PROC_INVALID_OPTION - Static variable in class nxopen.uf.UFSmd.PipSequentialE

SEQUENTIAL_PROC_NUM_ITEMS - Static variable in class nxopen.uf.UFSmd.PipSequentialE

SEQUENTIAL_PROCESS - Static variable in class nxopen.uf.UFSmd.PipSequentialE

SERIES - Static variable in class nxopen.tooling.ReusablePocketBuilder.Hole

Pocket with hole series

seriesSpacing() - Method in interface nxopen.display.DynamicSectionBuilder

Returns the section plane spacing in the current section series.

SERVER_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption

Server Property defined in server side report

serverProgID() - Method in interface nxopen.mechatronics.OPCClientBuilder

Returns the server prog ID.

serverType() - Method in interface nxopen.mechatronics.OPCClientBuilder

Returns the server type.

ServiceOrientedBodyFeature - Interface in nxopen.features

Represents a body feature
To create or edit an instance of this class, use ServiceOrientedBodyFeatureBuilder

Created in NX11.0.0

ServiceOrientedBodyFeatureBuilder - Interface in nxopen.features

Represents a ServiceOrientedBodyFeature builder
Not support KF.

ServiceOrientedFeatureCurve - Interface in nxopen.features

Represents a curve feature
To create or edit an instance of this class, use ServiceOrientedFeatureCurveBuilder

Created in NX11.0.0

ServiceOrientedFeatureCurveBuilder - Interface in nxopen.features

Represents a ServiceOrientedFeatureCurve builder
Not support KF.

Session - Interface in nxopen

Represents the NX session.

Session.MarkVisibility - Class in nxopen

Indicates the visibility of an undo mark

Session.NamedPropertiesData - Class in nxopen

This class holds the data returned from Session.getNamedProperties(nxopen.TaggedObject)

Session.ProjectAssignmentObjectType - Class in nxopen

Indicates whether project assignment is for item, item revision or dataset

Session.ProjectAssignmentState - Class in nxopen

Indicates project assignment state

Session.TransientPartPolicy - Class in nxopen

Persistence policies for transient modified parts

Session.UndoLastNVisibleMarksData - Class in nxopen

This class holds the data returned from Session.undoLastNVisibleMarks(int)

Session.UndoMarkData - Class in nxopen

This structure contains data about an undo mark

SESSION_DELAYED - Static variable in class nxopen.uf.UFWave.DelayStatus

SESSION_FROZEN - Static variable in class nxopen.uf.UFWave.DelayStatus

SessionAssemblies - Interface in nxopen.preferences

Represents the set of Assemblies Preferences applicable to entire session
To obtain an instance of this class, refer to SessionPreferences

Created in NX3.0.0

SessionAssemblies.DragHandlePositionOption - Class in nxopen.preferences

Specify whether drag handle will be positioned at the center of bounding box or origin of component

SessionAssemblies.PartNameOption - Class in nxopen.preferences

Describe whether the part name style is file name or description or specified

SessionAssemblies.PositioningTaskCollectionOptionForDesignElements - Class in nxopen.preferences

Specify whether Design Elements will be added to the Work or Context Collection of a Positioning Task

sessionDelayed - Variable in class nxopen.PartDelayedUpdateStatus.DelayStatusInfo

The part is delayed because geometry and expressions are delayed.

SessionDrafting - Interface in nxopen.preferences

Represents the set of Drafting preferences applicable to entire session
To obtain an instance of this class, refer to SessionPreferences

Created in NX3.0.0

SessionDrafting.AnnotationStyleType - Class in nxopen.preferences

Describes the available types for annotation style preference

SessionDrafting.EdgeFaceDisplayType - Class in nxopen.preferences

Describes the available edge face display types

SessionDrafting.GridObjectType - Class in nxopen.preferences

Describes the available grid objects

SessionFactory - Class in nxopen

Used to obtain an initial reference to a session object.

SessionFactory() - Constructor for class nxopen.SessionFactory

sessionMeasureReq() - Method in interface nxopen.preferences.SessionPreferences

Returns object for doing Measure Requirements in Assembly Sequencing applicable to the entire session .

SessionMeasureRequirements - Interface in nxopen.preferences

Represents the two options available on the Measure Requirements toolbar and applicable to the entire session
To obtain an instance of this class, refer to SessionPreferences

Created in NX5.0.0

SessionMeasureRequirements.ActionOnViolation - Class in nxopen.preferences

Values for the action to take when a requirement error is generated for a measure with a displayed annotation in Assembly Sequencing.

SessionModeling - Interface in nxopen.preferences

Represents the set of Modeling preferences applicable to entire session
To obtain an instance of this class, refer to SessionPreferences

Created in NX3.0.0

SessionModeling.BodyTypeOption - Class in nxopen.preferences

Describes whether the body type is solid or sheet

SessionModeling.BooleanFacePropertiesInheritance - Class in nxopen.preferences

Describes whether the display of Boolean Face properties inherits from target body or tool body

SessionModeling.CurveFitMethodType - Class in nxopen.preferences

Describes whether the Curve Fit Method type is selected as cubic or quintic or advanced

SessionModeling.DynamicUpdateType - Class in nxopen.preferences

Describes whether the Dynamic Update type is not selected or selected as incremental or continuous

SessionModeling.EndpointDisplayStyleType - Class in nxopen.preferences

Styles for display endpoints of curves

SessionModeling.FreeFormConstructionResultType - Class in nxopen.preferences

Describes whether the Free Form Construction Result is plane or B Surface

SessionModeling.ImmediateChildrenType - Class in nxopen.preferences

Describes whether the Immediate Children type is selected for first level or for all

SessionModeling.LinkedAndExtractedGeometryPropertiesInheritance - Class in nxopen.preferences

Describes whether the display of linked and extracted geometry properties inherits from parent object or part default

SessionModeling.NewFacePropertiesInheritance - Class in nxopen.preferences

Describes whether the display of New Face properties inherits from body or part default

SessionModeling.PoleDisplayStyleType - Class in nxopen.preferences

Styles for display poles of B curves and B surfaces

SessionModeling.PoleEditStyleType - Class in nxopen.preferences

Styles for edit poles of B curves and B surfaces

SessionModeling.PolylineStyleType - Class in nxopen.preferences

Styles for polylines of B curves and B surfaces

SessionModeling.PreviewResolutionType - Class in nxopen.preferences

Freeform preview resolutions

SessionModeling.SaveDataForFeatureEditOption - Class in nxopen.preferences

Options for controling what additional data needs to be saved in part file to enhance the feature edit

SessionModeling.ShareGeometriesOnSaveType - Class in nxopen.preferences

Options for saving a part file with sharing of geometry data to reduce file size

SessionModeling.SketchDefaultActionType - Class in nxopen.preferences

Double click action for sketches

SessionModeling.SketchEditType - Class in nxopen.preferences

Edit option for sketches

SessionModeling.SplineDefaultActionTypes - Class in nxopen.preferences

Specifies the command that should be invoked when double-clicking on a spline.

SessionModeling.SurfaceExtensionOption - Class in nxopen.preferences

Options for controling how surfaces will be extended while moving geometry

SessionNXGateway - Interface in nxopen.preferences

Represents the set of NXGateway Preferences applicable to entire session
To obtain an instance of this class, refer to SessionPreferences

Created in NX3.0.0

SessionPdm - Interface in nxopen.preferences

Represents the NX Manager preferences for the entire session
To obtain an instance of this class, refer to SessionPreferences

Created in NX4.0.1

SessionPdm.JtUpdateFromSourceType - Class in nxopen.preferences

Options for the kind of JT update performed when a part is loaded

SessionPdm.MessagesInconsistentRevisionsType - Class in nxopen.preferences

Options for the kind of messages about inconsistent revisions when a part is loaded

SessionPdm.SynchroniseOnLoadType - Class in nxopen.preferences

Options for the kind of synchronisation with the PDM system performed when a part is loaded.

SessionPdm.SynchroniseOnSaveType - Class in nxopen.preferences

Options for the kind of synchronisation with the PDM system performed when a part is saved.

SessionPdm.UnpopulatedBehaviourType - Class in nxopen.preferences

Options for when to add NX datasets upon loading an unpopulated part in the PDM system

SessionPmi - Interface in nxopen.preferences

Represents the set of PMI preferences applicable to entire session
To obtain an instance of this class, refer to SessionPreferences

Created in NX4.0.0

SessionPreferences - Interface in nxopen.preferences

Represents a collection of session based preferences.

SessionSettings - Interface in nxopen.pdm

Values for the settings that affect the current Teamcenter session.

SessionSketch - Interface in nxopen.preferences

Represents the set of sketch preferences applicable to entire session
To obtain an instance of this class, refer to SessionPreferences

Created in NX3.0.0

SessionSketch.BackgroundType - Class in nxopen.preferences

Describes the available sketch background types.

SessionSketch.GroupConstraintType - Class in nxopen.preferences

Represents the constraint management option when creating a rigid or scalable sketch group.

SessionSketch.OriginType - Class in nxopen.preferences

Describes the available sketch origin types.

SessionSketch.RigidSetConstraintType - Class in nxopen.preferences

Deprecated.

Deprecated in NX11.0.0. Use Preferences.SessionSketch.GroupConstraintType instead.

SessionUserInterface - Interface in nxopen.preferences

Represents the set of User Interface preferences applicable to entire session.

SessionUserInterface.JournalFileFormatType - Class in nxopen.preferences

Describes the available format types for a journal file

SessionUserInterface.JournalLanguageType - Class in nxopen.preferences

Describes the language used to record journals

SessionUserInterfaceUI - Interface in nxopen.preferences

Represents all UI based session user interface preferneces.

SessionUserInterfaceUI.DisplayResourceBar - Class in nxopen.preferences

Describes whether the resource bar is displayed on left or right of window

SessionVisualizationColorSetting - Interface in nxopen.preferences

Deprecated.

Deprecated in NX8.5.0. Use PartVisualizationColorSetting instead.

SessionVisualizationEmphasis - Interface in nxopen.preferences

Represents visualization preferences for emphasis that are applicable to the entire session.

SessionVisualizationHighQualityImage - Interface in nxopen.preferences

Represents the High Quality Image preferences for the entire session
To obtain an instance of this class, refer to SessionPreferences

Created in NX4.0.0

SessionVisualizationHighQualityImage.ImageSizeData - Class in nxopen.preferences

This class holds the data returned from SessionVisualizationHighQualityImage.getImageSize()

SessionVisualizationHighQualityImage.ImageSizeType - Class in nxopen.preferences

The size at which to generate a High Quality Image.

SessionVisualizationHighQualityImage.OrientationType - Class in nxopen.preferences

Whether the High Quality Image is to be generated with portrait or landscape orientation

SessionVisualizationHighQualityImage.PlotQualityType - Class in nxopen.preferences

Describes the quality desired when plotting the High Quality Image

SessionVisualizationHighQualityImage.ResolutionData - Class in nxopen.preferences

This class holds the data returned from SessionVisualizationHighQualityImage.getResolution()

SessionVisualizationHighQualityImage.ResolutionType - Class in nxopen.preferences

The resolution to use when generating a High Quality Image.

SessionVisualizationPerformance - Interface in nxopen.preferences

Represents visualization performance preferences that are applicable to the entire session.

SessionVisualizationScreen - Interface in nxopen.preferences

Represents the set of visualization preferences under screen tab applicable to entire session
To obtain an instance of this class, refer to SessionPreferences

Created in NX3.0.0

SessionVisualizationScreen.ViewTriadLocation - Class in nxopen.preferences

The view triad location types.

SessionVisualizationShade - Interface in nxopen.preferences

Represents the UI related Visualization Shade preferences.

SessionVisualizationShade.Rgb - Class in nxopen.preferences

Deprecated.

Deprecated in NX8.5.0. Use NXColor.Rgb instead.

SessionVisualizationShade.SeeThruEdgesType - Class in nxopen.preferences

Deprecated.

Deprecated in NX8.5.0. Use PartVisualizationEmphasis.EdgesType instead.

SessionVisualizationShade.SeeThruOptions - Class in nxopen.preferences

Deprecated.

Deprecated in NX8.5.0. See PartVisualizationEmphasis .

SessionVisualizationShade.SeeThruStyleType - Class in nxopen.preferences

Deprecated.

Deprecated in NX8.5.0. Use PartVisualizationEmphasis.SeeThruStyleType instead.

SessionVisualizationSpecialEffects - Interface in nxopen.preferences

Represents the set of visualization special effect preferences applicable to entire session.

SessionVisualizationVisual - Interface in nxopen.preferences

Represents all UI based session Visualization visual preferences
To obtain an instance of this class, refer to UI

Created in NX3.0.0

SessionWorkPlane - Interface in nxopen.preferences

Deprecated.

Deprecated in NX8.5.0. See SessionVisualizationEmphasis .

SessionWorkPlane.ObjectDisplay - Class in nxopen.preferences

Deprecated.

Deprecated in NX8.5.0. See SessionVisualizationEmphasis .

SET - Static variable in class nxopen.features.shipdesign.ShipDesignPreferencesBuilder.ColorType

set color type

set1() - Method in interface nxopen.MeasureDistanceBuilder

Returns the set1
License requirements: None.

set1IsCollector - Variable in class nxopen.uf.UFCurve.AskIntParmsScData

set2() - Method in interface nxopen.MeasureDistanceBuilder

Returns the set2
License requirements: None.

set2dContact(Tag, UFMotion.Motion2DContact) - Method in interface nxopen.uf.UFMotion

Refer to UF_MOTION_set_2D_contact for documentation.

set2dValue(Tag, int, double[]) - Method in interface nxopen.uf.UFParam

Refer to UF_PARAM_set_2d_value for documentation.

set2IsCollector - Variable in class nxopen.uf.UFCurve.AskIntParmsScData

set3dContact(Tag, UFMotion.Motion3DContact) - Method in interface nxopen.uf.UFMotion

Refer to UF_MOTION_set_3D_contact for documentation.

set3dContactMethod(UFMotion.ContactMethod, int) - Method in interface nxopen.uf.UFMotion

Refer to UF_MOTION_set_3D_contact_method for documentation.

set3dValue(Tag, int, double[]) - Method in interface nxopen.uf.UFParam

Refer to UF_PARAM_set_3d_value for documentation.

SET_BASE_POINT - Static variable in class nxopen.tooling.BlankLayoutBuilder.Types

the type of set the base point of the blank

SET_DISPLAY_PART_ONLY_WHEN_OPEN - Static variable in class nxopen.shapesearch.ShapeSearchBuilder.OpenPartType

Set the opened part as display part only when it doesn't exist in the session

SET_FRAME - Static variable in class nxopen.cae.Post.AnimationControl

SET_MANAGER - Static variable in class nxopen.cae.PropertyTable.PropertyType

SET_MARKER - Static variable in class nxopen.cam.ToolpathEventType

SET_OF_VALUES - Static variable in class nxopen.validate.RequirementBuilder.DefinitionMethodOptions

SET_PCSTO_CADABS - Static variable in class nxopen.cam.InspectionAlignmentBuilder.AlignTypes

Set the PCS to Cadabs

SET_PCSTO_CSYS - Static variable in class nxopen.cam.InspectionAlignmentBuilder.AlignTypes

Set the PCS to a NX Csys

SET_PCSTO_MCS - Static variable in class nxopen.cam.InspectionAlignmentBuilder.AlignTypes

Set the PCS to Machine CS

setA1(String) - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder

License requirements: drafting ("DRAFTING")
.

setA1(String) - Method in interface nxopen.annotations.SurfaceFinishBuilder

License requirements: None.

setA2(String) - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder

License requirements: drafting ("DRAFTING")
.

setA2(String) - Method in interface nxopen.annotations.SurfaceFinishBuilder

License requirements: None.

setAASamplesEnum(StudioImageCaptureBuilder.AASamplesEnumType) - Method in interface nxopen.display.StudioImageCaptureBuilder

License requirements: None.

setAAxis(double) - Method in interface nxopen.cam.AlongMachineAxisMoveBuilder

License requirements: None.

setAbortOnFailure(boolean) - Method in interface nxopen.LoadOptions

Sets the option that specifies what action the system should take if it can't find a component part file
License requirements: None.

setAbove(String[]) - Method in interface nxopen.annotations.AppendedTextBuilder

Sets the appended text above the annotation
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setAboveText(String[]) - Method in interface nxopen.annotations.AppendedText

Sets the appended text above the annotation
License requirements: None.

setAboveText(String) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder

License requirements: None.

setAboveTextType(SearchModelViewBuilder.TextComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder

License requirements: None.

setAbs(boolean) - Method in interface nxopen.cae.ResultVariable

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setAbscissaAndOrdinateAxisDefinition(XyFunctionUnit, AfuData.OrdinateType, XyFunctionUnit, XyFunctionUnit) - Method in interface nxopen.cae.AfuData

Set the Abscissa and Ordinate Axis definitions of an AFU Data Record
License requirements: nx_ftk ("NX Advanced Graphing")
.

setAbsoluteConvergence(double) - Method in interface nxopen.cae.optimization.DAOStopCondition

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setAbsoluteConvergenceCriteria(double) - Method in interface nxopen.optimization.OptimizationBuilder

License requirements: None.

setAbsolutelyPosition(boolean) - Method in interface nxopen.assemblies.AbsolutePositionBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setAbsoluteMaximumPrincipalAngle(boolean) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setAbsoluteMaximumPrincipalStrain(boolean) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setAbsoluteMaximumPrincipalStress(boolean) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setAbsoluteMaximumShearStrain(boolean) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setAbsoluteMaximumShearStress(boolean) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setAbsoluteTextSize(double, double) - Method in interface nxopen.display.TransientText

Sets the size of the text, in absolute coordinates, in units of the displayed part.

setAbsoluteValue(boolean) - Method in interface nxopen.cae.CrossSectionParameters

Set all values to absolute values.

setAbsoluteValue(boolean) - Method in interface nxopen.cae.ResultMeasureResultOptions

Set the option to use absolute values
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setAbsoluteValue(boolean) - Method in interface nxopen.cae.ResultParameters

Set all values to absolute values.

setAbsValueFilter(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setAbsValueSort(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setAbsXValue(double) - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design") OR routing_base ("Routing Basic")
.

setAbsYValue(double) - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design") OR routing_base ("Routing Basic")
.

setAbsZValue(double) - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design") OR routing_base ("Routing Basic")
.

setAcadLayoutsToImport(String) - Method in interface nxopen.DxfdwgImporter

License requirements: None.

setAccelerated(boolean) - Method in interface nxopen.features.AestheticFaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setAcceleration(double) - Method in interface nxopen.motion.DriverOperation

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using DriverOperation.accelerationExpression() to query or edit it.

setAccelerationColor(int) - Method in interface nxopen.preferences.SessionModeling

Sets the acceleration color
License requirements: None.

setAccessibilityVectors(Tag, UFVariant, int, Tag[]) - Method in interface nxopen.uf.UFFbmGeom

Refer to UF_FBM_GEOM_set_accessibility_vectors for documentation.

setAccessKeys(AttributeTemplatesBuilder.AccessKey[]) - Method in interface nxopen.AttributeTemplatesBuilder

Set the access keys.

setAccessVectorMethod(SurfaceContourBuilder.AccessVectorMethodType) - Method in interface nxopen.cam.SurfaceContourBuilder

License requirements: cam_base ("CAM BASE")
.

setAccuracy(double) - Method in interface nxopen.display.ImageBasedLighting

License requirements: None.

setAccuracy(double) - Method in interface nxopen.MassPropertiesBuilder

License requirements: None.

setAcisVersion(AcisExporter.AcisVersionOption) - Method in interface nxopen.AcisExporter

License requirements: None.

setAcrossAssemblies(boolean) - Method in interface nxopen.routing.TransformPathBuilder

Sets the flag that indicates whether or not to transform. across the assemblies
License requirements: routing_base ("Routing Basic")

Created in NX8.0.0

setAction(ResultsManipulationBuilder.Action) - Method in interface nxopen.cae.ResultsManipulationBuilder

Deprecated.

Deprecated in NX9.0.0. Use ResultsManipulationBuilder.setOutputResultType(nxopen.cae.ResultsManipulationBuilder.OutputResultType) instead.

setAction(LowerLimit.ActionTypes) - Method in interface nxopen.cam.LowerLimit

License requirements: cam_base ("CAM BASE")
.

setAction(CGMBuilder.ActionOption) - Method in interface nxopen.CGMBuilder

License requirements: None.

setAction(PrintPDFBuilder.ActionOption) - Method in interface nxopen.PrintPDFBuilder

License requirements: None.

setAction(String, UFClone.Action, String) - Method in interface nxopen.uf.UFClone

Refer to UF_CLONE_set_action for documentation.

setActionEnableMaxFacetSize(boolean) - Method in interface nxopen.motion.BodyContactLms

License requirements: mechanisms ("MECHANISMS")
.

setActionOnError(ConversionProcessSettingsBuilder.ActionOnErrorEnum) - Method in interface nxopen.drawings.ConversionProcessSettingsBuilder

License requirements: convert_to_pmi (" Convert To PMI"), drafting ("DRAFTING")
.

setActionPoint(Point) - Method in interface nxopen.motion.BushingDefine

License requirements: mechanisms ("MECHANISMS")
.

setActionPoint(Point) - Method in interface nxopen.motion.ConnectorBuilder

License requirements: mechanisms ("MECHANISMS")
.

setActionPoint(Point) - Method in interface nxopen.motion.ScalarForceBuilder

License requirements: mechanisms ("MECHANISMS")
.

setActionType(MarkAsTemplateBuilder.ActionTypeEnum) - Method in interface nxopen.drawings.MarkAsTemplateBuilder

License requirements: drafting ("DRAFTING")
.

setActionType(int) - Method in interface nxopen.GroupBuilder

License requirements: None.

setActionType(int) - Method in interface nxopen.linedesigner.ReuseLibraryDragData

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setActionType(PackagingInterferenceBuilder.Action) - Method in interface nxopen.motion.PackagingInterferenceBuilder

Sets the PackagingInterference action type defined at PackagingInterferenceBuilder.Action
License requirements: mechanisms ("MECHANISMS")

Created in NX4.0.0

setActionType(EjectorPostProcessingBuilder.TrimMethod) - Method in interface nxopen.tooling.EjectorPostProcessingBuilder

License requirements: None.

setActionType(TrimMoldComponentsBuilder.TrimMethod) - Method in interface nxopen.tooling.TrimMoldComponentsBuilder

License requirements: None.

setActionType(TrimSolidBuilder.TrimSolidAction) - Method in interface nxopen.tooling.TrimSolidBuilder

License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setActionWhenGouging(CutParametersActionWhenGougingTypes) - Method in interface nxopen.cam.MillCutParameters

License requirements: cam_base ("CAM BASE")
.

setActivate(boolean) - Method in interface nxopen.geometricutilities.PartModuleOutputBuilder

Deprecated.

Deprecated in NX9.0.0. Please use PartModule.activate(boolean) instead.

setActivateBaseline(boolean) - Method in interface nxopen.annotations.OrdinateBaselineBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setActivateFeatureGroupWithRollback(boolean) - Method in interface nxopen.preferences.SessionModeling

License requirements: None.

setActivatePartModule(boolean) - Method in interface nxopen.features.PartModuleBuilder

License requirements: usr_defined_features ("USER DEFINED FEATURES")
.

setActivatePerpendicular(boolean) - Method in interface nxopen.annotations.OrdinateBaselineBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setActive(LaminateDynamicSim) - Method in interface nxopen.cae.LaminateDynamicSimCollection

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setActive(boolean) - Method in interface nxopen.cae.responsesimulation.NormalMode

License requirements: nx_response_anlys ("NX Response Analysis")
.

setActive(boolean) - Method in interface nxopen.cam.CycleCoolant

License requirements: cam_base ("CAM BASE")
.

setActive(boolean) - Method in interface nxopen.cam.CycleDwell

License requirements: cam_base ("CAM BASE")
.

setActive(boolean) - Method in interface nxopen.cam.CycleNodragClearance

License requirements: cam_base ("CAM BASE")
.

setActive(boolean) - Method in interface nxopen.cam.CycleSpindle

License requirements: cam_base ("CAM BASE")
.

setActive(boolean) - Method in interface nxopen.cam.CycleStepRetract

License requirements: cam_base ("CAM BASE")
.

setActive(boolean) - Method in interface nxopen.cam.CycleTipRelease

License requirements: cam_base ("CAM BASE")
.

setActive(ExpressionGroup) - Method in interface nxopen.ExpressionGroupCollection

Sets the active expression group
License requirements: None.

setActive(boolean) - Method in interface nxopen.features.vehicledesign.BaseDataLoadingBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setActive(boolean) - Method in interface nxopen.features.vehicledesign.BaseDataPassengerBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setActive(boolean) - Method in interface nxopen.motion.NormalModeProperty

License requirements: mechanisms ("MECHANISMS")
.

setActive(boolean) - Method in interface nxopen.ObjectGeneralPropertiesBuilder

License requirements: None.

setActive(boolean) - Method in interface nxopen.report.CommandBuilder

License requirements: None.

setActive(boolean) - Method in interface nxopen.weld.CharacteristicsValueBuilder

License requirements: ugweld ("UG WELD")
.

setActiveArrangement(Arrangement) - Method in interface nxopen.assemblies.ComponentAssembly

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setActiveArrangement(Tag) - Method in interface nxopen.uf.UFAssem

Refer to UF_ASSEM_set_active_arrangement for documentation.

setActiveClassifier(Classifier) - Method in interface nxopen.visualreporting.Rule

License requirements: nx_visual_reporting ("Visual Reporting")
.

setActiveClassifierOfRule(Rule, Classifier) - Method in interface nxopen.visualreporting.VisualReportBuilder

Sets the active Classifier in this Rule for a multiple properties report.

setActiveConditionSequence(SimConditionSequence) - Method in interface nxopen.cae.SimConditionSeqMgr

License requirements: None.

setActiveDynamicSection(DynamicSection) - Method in interface nxopen.ModelingView

License requirements: None.

setActiveEditSegmentType(EditPointBuilder.Editsegmenttype) - Method in interface nxopen.mechanicalrouting.EditPointBuilder

License requirements: routing_base ("Routing Basic")
.

setActiveEvent(RSEvent) - Method in interface nxopen.cae.responsesimulation.Solution

License requirements: nx_response_anlys ("NX Response Analysis")
.

setActiveEventSolveOptions(DurabilitySolverBuilder.ActiveEventSolveOptionsEnum) - Method in interface nxopen.cae.DurabilitySolverBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setActiveExciterConfig(int) - Method in interface nxopen.cae.PreTestExciterConfigCollection

License requirements: nx_correl_base ("FE Correlation")
.

setActiveFillComponent(Component) - Method in interface nxopen.tooling.MoldFillingBuilder

Sets the specified component as the active component.

setActiveFront(boolean) - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setActivegroupOption(boolean) - Method in interface nxopen.GroupBuilder

License requirements: None.

setActiveHorizontalMargin(OrdinateMargin) - Method in interface nxopen.annotations.BaseOrdinateDimensionBuilder

License requirements: drafting ("DRAFTING")
.

setActiveLayer(int, int) - Method in interface nxopen.routing.PlacePartBuilder

Set the layer for the loaded part.

setActiveMetasolution(DurabilityMetaSolution) - Method in interface nxopen.cae.DurabilityMetaSolutionCollection

Activates the metasolution.

setActiveModePair(int, int, boolean) - Method in interface nxopen.cae.CorrelSolution

Sets a specific mode pair as active or not
License requirements: nx_correl_base ("FE Correlation")
.

setActiveMotionType(EditPointBuilder.Motiontype) - Method in interface nxopen.mechanicalrouting.EditPointBuilder

License requirements: routing_base ("Routing Basic")
.

setActivePage(int) - Method in interface nxopen.blockstyler.TabControl

License requirements: None.

setActiveParameterGroupName(String) - Method in interface nxopen.motion.MechatronicsBuilder

License requirements: mechanisms ("MECHANISMS")
.

setActivePlane(DynamicSectionTypes.Axis, DynamicSectionTypes.ActivePlane) - Method in interface nxopen.display.DynamicSectionBuilder

Sets the active plane in the section
Single Plane:

Display.DynamicSectionTypes.Axis#Z is the active axis.

setActivePoints(Point[], Point) - Method in interface nxopen.features.IsoparametricCurvesBuilder

Sets key points that are selected or will be moved
License requirements: solid_modeling ("SOLIDS MODELING")
.

setActivePoints(Point[], Point) - Method in interface nxopen.geometricutilities.CurveShapingBuilder

Sets key points that are selected or will be moved
License requirements: studio_free_form ("STUDIO FREE FORM")
.

setActivePortVariableGroupName(String) - Method in interface nxopen.motion.MechatronicsBuilder

License requirements: mechanisms ("MECHANISMS")
.

setActivePostReport(LaminatePostReport) - Method in interface nxopen.cae.LaminatePostReportCollection

License requirements: nx_lam_composites ("Laminate Composites")
.

setActivePretest(PreTestSolution) - Method in interface nxopen.cae.PreTestSolutionCollection

License requirements: nx_correl_base ("FE Correlation")
.

setActiveRear(boolean) - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setActiveRefMode(int, boolean) - Method in interface nxopen.cae.CorrelSolution

Sets a specific reference mode as active or not
License requirements: nx_correl_base ("FE Correlation")
.

setActiveRefSet(String) - Method in interface nxopen.routing.PlacePartBuilder

Set the reference set to use for the loaded part.

setActiveRowIndex(int) - Method in interface nxopen.features.shipdesign.QualifySketchBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setActiveSensor(int, boolean) - Method in interface nxopen.cae.CorrelSolution

Sets a specific sensor as active or not
License requirements: nx_correl_base ("FE Correlation")
.

setActiveSensorConfig(int) - Method in interface nxopen.cae.PreTestSensorConfigCollection

License requirements: nx_correl_base ("FE Correlation")
.

setActiveSensorDof(int, int, boolean) - Method in interface nxopen.cae.CorrelSolution

Sets a specific sensor DOF as active or not
License requirements: nx_correl_base ("FE Correlation")
.

setActiveSensorDofOrientation(int, int, boolean) - Method in interface nxopen.cae.CorrelSolution

Sets a specific sensor DOF orientation
License requirements: nx_correl_base ("FE Correlation")
.

setActiveSide(boolean) - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setActiveSketchViewColor(NXColor) - Method in interface nxopen.drawings.ViewWorkflowBuilder

License requirements: drafting ("DRAFTING")
.

setActiveSolution(CorrelSolution) - Method in interface nxopen.cae.CorrelSolutionCollection

License requirements: None.

setActiveSolution(ModelUpdateSolution) - Method in interface nxopen.cae.ModelUpdateSolutionCollection

License requirements: None.

setActiveSolution(Solution) - Method in interface nxopen.cae.responsesimulation.SolutionCollection

License requirements: nx_response_anlys ("NX Response Analysis")
.

setActiveSolution(SimSolution) - Method in interface nxopen.cae.SimSimulation

Sets the active solution
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setActiveSolution(MotionSolution) - Method in interface nxopen.motion.MotionSolutionCollection

Set the active MotionSolution object of current session.

setActiveSolution(Tag) - Method in interface nxopen.uf.UFMotion

Refer to UF_MOTION_set_active_solution for documentation.

setActiveSolutionAndStepNx(Tag, Tag) - Method in interface nxopen.uf.UFSf

Refer to UF_SF_set_active_solution_and_step_nx for documentation.

setActiveStatus(boolean) - Method in interface nxopen.cae.LaminateGlobalLayup

License requirements: nx_lam_composites ("Laminate Composites")
.

setActiveStatus(boolean) - Method in interface nxopen.cae.LaminateModeProperty

Sets the active status
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setActiveStatus(boolean) - Method in interface nxopen.mechatronics.GanttOperationBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setActiveStep(SimSolutionStep) - Method in interface nxopen.cae.SimSolution

Sets the active step
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setActiveTabPage(int) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setActiveTemplate(String) - Method in interface nxopen.cae.xyplot.BaseTemplateManager

License requirements: nx_ftk ("NX Advanced Graphing")
.

setActiveTransformType(TransformBlockBuilder.Transformtype) - Method in interface nxopen.mechanicalrouting.TransformBlockBuilder

License requirements: routing_base ("Routing Basic")
.

setActiveVerticalMargin(OrdinateMargin) - Method in interface nxopen.annotations.BaseOrdinateDimensionBuilder

License requirements: drafting ("DRAFTING")
.

setActiveView(TaggedObject) - Method in interface nxopen.formboard.ShapeSegmentBuilder

Sets the active view for the shape operation.

setActiveView(ActiveView) - Method in interface nxopen.motion.ArticulationControl

License requirements: mechanisms ("MECHANISMS")
.

setActiveView(ActiveView) - Method in interface nxopen.motion.SpreadsheetRunControl

License requirements: mechanisms ("MECHANISMS")
.

setActiveViewColor(NXColor) - Method in interface nxopen.preferences.PartDrafting

Sets the drafting active view color.

setActiveWorkMode(int, boolean) - Method in interface nxopen.cae.CorrelSolution

Sets a specific work mode as active or not
License requirements: nx_correl_base ("FE Correlation")
.

setActiveWorkMode(int, boolean) - Method in interface nxopen.cae.PreTestSolution

Sets a specific work mode as active or not
License requirements: nx_correl_base ("FE Correlation")
.

setActiveZone(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setActivityStatus(boolean) - Method in interface nxopen.cae.DurabilityEvent

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setActivityStatus(boolean) - Method in interface nxopen.cae.ModelUpdateDesignVariable

Sets activity status
License requirements: nx_correl_update ("FE Model Update")
.

setActualValue(int) - Method in interface nxopen.motion.ConfigurationIntegerParameter

License requirements: mechanisms ("MECHANISMS")
.

setActualValue(String) - Method in interface nxopen.motion.ConfigurationTextParameter

License requirements: mechanisms ("MECHANISMS")
.

setAcutelyAngledWallsChecker(boolean) - Method in interface nxopen.features.AnalyzePocketBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAdamsSolverProperty(AdamsSolverProperty) - Method in interface nxopen.motion.MotionSolutionBuilder

License requirements: mechanisms ("MECHANISMS")
.

setAdapterIdentify(SignalAdapter) - Method in interface nxopen.mechatronics.MATLABSignalConnectionBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setAdapterObject(SignalAdapter) - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setAdapterTag(SignalAdapter) - Method in interface nxopen.mechatronics.SignalConnectionBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setAdaptiveScaleLimits(boolean) - Method in interface nxopen.blockstyler.AngularDimension

License requirements: None.

setAdaptiveScaleLimits(boolean) - Method in interface nxopen.blockstyler.DoubleBlock

License requirements: None.

setAdaptiveScaleLimits(boolean) - Method in interface nxopen.blockstyler.ExpressionBlock

License requirements: None.

setAdaptiveScaleLimits(boolean) - Method in interface nxopen.blockstyler.IntegerBlock

License requirements: None.

setAdaptiveScaleLimits(boolean) - Method in interface nxopen.blockstyler.LinearDimension

License requirements: None.

setAdaptiveScaleLimits(boolean) - Method in interface nxopen.blockstyler.OnPathDimension

License requirements: None.

setAdaptiveScaleLimits(boolean) - Method in interface nxopen.blockstyler.RadiusDimension

License requirements: None.

setAddAllSubordinates(boolean) - Method in interface nxopen.assemblies.SubsetBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setAddBeamFillets(boolean) - Method in interface nxopen.cae.ResultMeasureResultAllOptions

Set the option to add beam fillets for calculation of beam stresses only
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setAddButtonSensitive(boolean) - Method in interface nxopen.blockstyler.ListBox

License requirements: None.

setAddButtonSensitive(boolean) - Method in interface nxopen.blockstyler.SetList

License requirements: None.

setAddCadFeatureAttributes(boolean) - Method in interface nxopen.cam.FeatureRecognitionBuilder

License requirements: None.

setAddCenterPasses(boolean) - Method in interface nxopen.cam.AreaMillingNonSteepContainment

License requirements: None.

setAddCenterPasses(boolean) - Method in interface nxopen.cam.FlowCutSteepContainment

License requirements: None.

setAddComponents(boolean) - Method in interface nxopen.ObjectGeneralPropertiesBuilder

License requirements: None.

setAddComponentsAutomatically(boolean, boolean) - Method in interface nxopen.ReferenceSet

Sets the add components automatically toggle value.

setAddComponentsExclusively(boolean) - Method in interface nxopen.tooling.ChangeoverManagementBuilder

License requirements: None.

setAddCosmeticEnd(boolean) - Method in interface nxopen.weld.FilletBuilder

License requirements: ugweld ("UG WELD")
.

setAddCover(boolean) - Method in interface nxopen.linedesigner.HoleFeatureBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setAddDfaMixins(boolean) - Method in interface nxopen.pdm.PartOperationImportBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setAddedBottom(boolean) - Method in interface nxopen.features.sheetmetal.ExportFlatPatternBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setAddedGeometry(Section) - Method in interface nxopen.features.sheetmetal.UnbendBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setAddedTop(boolean) - Method in interface nxopen.features.sheetmetal.ExportFlatPatternBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setAddEndPointsSwitch(int) - Method in interface nxopen.die.SteelInsertSegmentParentBuilder

Sets the add end points switch
License requirements: ug_die_design ("Die Design")
.

setAddExtensionToggle(boolean) - Method in interface nxopen.mechanicalrouting.PathTransitionBuilder

License requirements: routing_base ("Routing Basic")
.

setAddfillets(boolean) - Method in interface nxopen.cae.ResultVariable

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setAddFillets(boolean) - Method in interface nxopen.features.SmoothCurveStringBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setAddFolderToSearch(String) - Method in interface nxopen.tooling.RenameAndExportComponentBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setAddForeshorteningSymbol(boolean) - Method in interface nxopen.drawings.ViewBreakBuilder

License requirements: drafting ("DRAFTING")
.

setAddHandler(ListBox.AddCallback) - Method in interface nxopen.blockstyler.ListBox

Sets the Add handler.

setAddHandler(SetList.AddCallback) - Method in interface nxopen.blockstyler.SetList

Sets the AddNewSet handler.

setAddIndex(boolean) - Method in interface nxopen.ObjectGeneralPropertiesBuilder

License requirements: None.

setAddInsulationOnFittings(boolean) - Method in interface nxopen.mechanicalrouting.InsulationBuilder

License requirements: routing_base ("Routing Basic")
.

setAdditionalCommands(String) - Method in interface nxopen.cam.TurningOperationBuilder

License requirements: cam_base ("CAM BASE")
.

setAdditionalFrequencies(double[]) - Method in interface nxopen.cae.LaminateSineEventBuilder

Sets the additional frequencies values
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setAdditionalFrequenciesBreakPoints(boolean) - Method in interface nxopen.cae.LaminateSineEventBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setAdditionalFrequenciesUnits(LaminateSineEventBuilder.AdditionalFrequeciesUnitsEnum) - Method in interface nxopen.cae.LaminateSineEventBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setAdditionalPasses(int) - Method in interface nxopen.cam.PlanarOperationBuilder

License requirements: cam_base ("CAM BASE")
.

setAdditionalPasses(int) - Method in interface nxopen.cam.StepoverBuilder

License requirements: cam_base ("CAM BASE")
.

setAdditionalPlanesPerFrame(int) - Method in interface nxopen.features.shipdesign.ShellExpansionBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setAdditionalProfiling(boolean) - Method in interface nxopen.cam.TurnCutParameters

License requirements: cam_base ("CAM BASE")
.

setAdditionalReferenceFromFeature(Feature) - Method in interface nxopen.weld.LocatorReferenceBuilder

Set additional references.

setAddLeftRailingToggle(boolean) - Method in interface nxopen.linedesigner.StairwayEquipmentBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setAddMaster(boolean) - Method in interface nxopen.pdm.PartOperationCreateBuilder

Sets the Add Master Flag Use this only in case creating a new Altrep.

setAddMasterComponentPart(boolean) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setAddMasterFlag(boolean) - Method in interface nxopen.FileNew

Deprecated.

Deprecated in NX10.0.0. Use PartOperationCreateBuilder.setAddMaster(boolean) to set addMaster flag.

setAddNeatTrim(boolean) - Method in interface nxopen.features.shipdesign.StiffenerBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setAddNewSetLabel(String) - Method in interface nxopen.blockstyler.SetList

License requirements: None.

setAddonOperation(ScrapDesignBuilder.AddonType) - Method in interface nxopen.tooling.ScrapDesignBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAddPartToActiveRunFlag(boolean) - Method in interface nxopen.routing.PlacePartBuilder

Set a flag which tells the builder whether the part being placed will be added in active run or not.

setAddPointsOnSubdivideFlag(boolean) - Method in interface nxopen.routing.SplinePathBuilder

Sets whether or not additional points will be added to a spline which is created as the result of a subdivide.

setAddRaft(boolean) - Method in interface nxopen.Print3dBuilder

License requirements: None.

setAddRailingToggle(boolean) - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setAddRightRailingToggle(boolean) - Method in interface nxopen.linedesigner.StairwayEquipmentBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setAddRiserToggle(boolean) - Method in interface nxopen.linedesigner.StairwayEquipmentBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setAddSheetName(boolean) - Method in interface nxopen.drawings.ViewSettingsBuilder

License requirements: convert_to_pmi (" Convert To PMI"), drafting ("DRAFTING")
.

setAddSheetNumber(boolean) - Method in interface nxopen.drawings.ViewSettingsBuilder

License requirements: convert_to_pmi (" Convert To PMI"), drafting ("DRAFTING")
.

setAddStringerToggle(boolean) - Method in interface nxopen.linedesigner.StairwayEquipmentBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setAddSupport(boolean) - Method in interface nxopen.Print3dBuilder

License requirements: None.

setAddTangentFaces(boolean) - Method in interface nxopen.features.FaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAddToMaterialLibraryToggle(boolean) - Method in interface nxopen.PhysicalMaterialBuilder

License requirements: None.

setAddUnconnectedEquipmentToActiveRunOption(boolean) - Method in interface nxopen.mechanicalrouting.PartPlacementBuilder

Sets the option that determines whether a part positioned as Equipment should be added to the active Run
License requirements: routing_base ("Routing Basic")
.

setAddWatermark(boolean) - Method in interface nxopen.PrintPDFBuilder

License requirements: None.

setADefinePoint(int, double, double, double, int) - Method in interface nxopen.features.RapidSurfaceBuilder

Deprecated.

Deprecated in NX6.0.0. Use RapidSurfaceBuilder.setDefiningPoint(int, nxopen.Point3d, int) instead.

setAdjacencyToleranceData(double) - Method in interface nxopen.drawings.ViewStyleSectionBuilder

License requirements: drafting ("DRAFTING")
.

setAdjacentBlades(CutParametersAdjacentBladesTypes) - Method in interface nxopen.cam.MillCutParameters

License requirements: cam_base ("CAM BASE")
.

setAdjacentBlends(boolean) - Method in interface nxopen.drawings.ViewStyleVirtualIntersectionsBuilder

License requirements: drafting ("DRAFTING")
.

setAdjacentBlends(boolean) - Method in interface nxopen.drawings.VirtualIntersectionsViewStyle

Sets the status of adjacent blends.

setAdjacentBlends(boolean) - Method in interface nxopen.preferences.VirtualIntersectionsViewPreferences

Sets the status of adjacent blends.

setAdjacentBlendsColor(int) - Method in interface nxopen.drawings.VirtualIntersectionsViewStyle

Sets the color of adjacent blends.

setAdjacentBlendsColor(int) - Method in interface nxopen.preferences.VirtualIntersectionsViewPreferences

Sets the color of adjacent blends.

setAdjacentBlendsEndGaps(boolean) - Method in interface nxopen.drawings.VirtualIntersectionsViewStyle

Sets the status of adjacent blends end gaps.

setAdjacentBlendsEndGaps(boolean) - Method in interface nxopen.preferences.VirtualIntersectionsViewPreferences

Sets the status of adjacent blends end gaps.

setAdjacentBlendsEndGapsData(double) - Method in interface nxopen.drawings.VirtualIntersectionsViewStyle

Sets the value of adjacent blends end gaps.

setAdjacentBlendsEndGapsData(double) - Method in interface nxopen.preferences.VirtualIntersectionsViewPreferences

Sets the value of adjacent blends end gaps.

setAdjacentBlendsFont(Font) - Method in interface nxopen.drawings.VirtualIntersectionsViewStyle

Sets the font of adjacent blends.

setAdjacentBlendsFont(Font) - Method in interface nxopen.preferences.VirtualIntersectionsViewPreferences

Sets the font of adjacent blends.

setAdjacentBlendsWidth(Width) - Method in interface nxopen.drawings.VirtualIntersectionsViewStyle

Sets the width of adjacent blends.

setAdjacentBlendsWidth(Width) - Method in interface nxopen.preferences.VirtualIntersectionsViewPreferences

Sets the width of adjacent blends.

setAdjacentFacet(Tag, int, int, int) - Method in interface nxopen.uf.UFFacet

Refer to UF_FACET_set_adjacent_facet for documentation.

setAdjacentSurface(Face) - Method in interface nxopen.cam.InspectionEdgePointFeatureBuilder

Sets the edge point inspection feature adjacent surface tag
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setAdjreg(int) - Method in interface nxopen.cam.RotateToolMoveBuilder

License requirements: None.

setAdjregToggle(boolean) - Method in interface nxopen.cam.RotateToolMoveBuilder

License requirements: None.

setAdjustBoundaryChannel(boolean) - Method in interface nxopen.tooling.CoolingDefineChannelBuilder

License requirements: ug_mold_design ("UG MOLD")
.

setAdjustBoundaryChannel(boolean) - Method in interface nxopen.tooling.CoolingExtendBuilder

License requirements: None.

setAdjustedNodeLocationColor(NXColor) - Method in interface nxopen.cae.ProjectNodesToCadGeometryBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setAdjustedPlateLength(double) - Method in interface nxopen.tooling.DieBaseBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setAdjustedThickness(double) - Method in interface nxopen.die.RibChildBuilder

Sets the adjusted thickness of the die rib.

setAdjustedThickness(double) - Method in interface nxopen.die.RibParentBuilder

Sets the adjusted thickness of die ribs.

setAdjustFeedRateOption(CornerControlBuilder.AdjustFeedRateOptions) - Method in interface nxopen.cam.CornerControlBuilder

License requirements: cam_base ("CAM BASE")
.

setAdjustment(ProbeControlParametersBuilder.AdjustmentTypes) - Method in interface nxopen.cam.ProbeControlParametersBuilder

License requirements: None.

setAdjustmentMode(TurnRoughFinishLocalReturnBuilder.AdjustmentModeTypes) - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder

License requirements: cam_base ("CAM BASE")
.

setAdjustMethod(ChannelAdjustBuilder.AdjustType) - Method in interface nxopen.tooling.ChannelAdjustBuilder

License requirements: None.

setAdjustRegister(int, int) - Method in interface nxopen.cam.ToolTrackingPointBuilder

Set the Adjust register
License requirements: None.

setAdjustRegister(int) - Method in interface nxopen.sim.KinematicComponentBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setAdjustRegisterToggle(boolean) - Method in interface nxopen.cam.ToolChangeCiBuilder

License requirements: cam_base ("CAM BASE")
.

setAdjustRegisterToggle(int, boolean) - Method in interface nxopen.cam.ToolTrackingPointBuilder

Set the Adjust register Toggle Status
License requirements: None.

setAdjustRegisterType(MachinePocketGroupBuilder.RegisterType) - Method in interface nxopen.cam.MachinePocketGroupBuilder

Deprecated.

Deprecated in NX8.5.0. Use CAM.MachinePocketGroupBuilder#setAdjustIdBuilder instead.

setAdjustRegisterType(KinematicComponentBuilder.RegisterTypes) - Method in interface nxopen.sim.KinematicComponentBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setAdjustVector(Direction) - Method in interface nxopen.tooling.ChannelAdjustBuilder

License requirements: None.

setAdministrationBypass(boolean) - Method in interface nxopen.pdm.SessionSettings

License requirements: None.

setAdministrationLogging(boolean) - Method in interface nxopen.pdm.SessionSettings

License requirements: None.

setAdoptAssemblyJointStatus(MotionEnvironment.AdoptAssemblyJointStatus) - Method in interface nxopen.motion.MotionEnvironment

Sets the on-off status of adopt assembly joint
License requirements: mechanisms ("MECHANISMS")
.

setAdoptedDesignBody(Body) - Method in interface nxopen.features.shipdesign.DvToMvMappingBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setAdoptedMfgBody(Body) - Method in interface nxopen.features.shipdesign.DvToMvMappingBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setAdultHic1000OutputColor(NXColor) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setAdultHic1000OutputFont(PedestrianProtectionBuilder.Font) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setAdultHic1000OutputLayer(int) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setAdultHic1000OutputWidth(PedestrianProtectionBuilder.Width) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setAdultHic1700OutputColor(NXColor) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setAdultHic1700OutputFont(PedestrianProtectionBuilder.Font) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setAdultHic1700OutputLayer(int) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setAdultHic1700OutputWidth(PedestrianProtectionBuilder.Width) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setAdvanceAngle(double) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setAdvancedConstraintInformation(int, TaggedObject[], TaggedObject[], double, double, double, double, double, TaggedObject[], double[], double[], double[]) - Method in interface nxopen.bodydes.OnestepUnformBuilder

Set advanced constraint information.

setAdvancedFit(boolean) - Method in interface nxopen.geometricutilities.CurveFitData

License requirements: None.

setAdvancedMaterial(boolean) - Method in interface nxopen.JtCreator

License requirements: None.

setAdvancedMethod(StudioXformBuilder.AdvancedMethodType) - Method in interface nxopen.features.StudioXformBuilder

Deprecated.

Deprecated in NX8.5.0. Use StudioXformBuilderEx instead.

setAdvancedMethod(StudioXformBuilderEx.AdvancedMethodType) - Method in interface nxopen.features.StudioXformBuilderEx

Deprecated.

Deprecated in NX8.5.0. Use StudioXformBuilderEx.setAdvancedMethodOption(nxopen.features.StudioXformBuilderEx.AdvancedMethodOptionType) instead.

setAdvancedMethodOption(StudioXformBuilderEx.AdvancedMethodOptionType) - Method in interface nxopen.features.StudioXformBuilderEx

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setAdvancedScalingData(HumanData.AdvancedScalingType, double) - Method in interface nxopen.features.HumanBuilder

Set data for advanced scaling
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setAdvancedVisViewAngleTolerance(double) - Method in interface nxopen.preferences.PartVisualizationShade

Deprecated.

Deprecated in NX8.0.0. Use PartVisualizationShade.getAdvVisViewFacetTolerances(nxopen.preferences.PartVisualizationShade.AdvViewToleranceType) and PartVisualizationShade.setAdvVisViewFacetTolerances(nxopen.preferences.PartVisualizationShade.AdvViewToleranceType, double, double, double, double) instead.

setAdvancedVisViewEdgeTolerance(double) - Method in interface nxopen.preferences.PartVisualizationShade

Deprecated.

Deprecated in NX8.0.0. Use PartVisualizationShade.getAdvVisViewFacetTolerances(nxopen.preferences.PartVisualizationShade.AdvViewToleranceType) and PartVisualizationShade.setAdvVisViewFacetTolerances(nxopen.preferences.PartVisualizationShade.AdvViewToleranceType, double, double, double, double) instead.

setAdvancedVisViewFaceTolerance(double) - Method in interface nxopen.preferences.PartVisualizationShade

Deprecated.

Deprecated in NX8.0.0. Use PartVisualizationShade.getAdvVisViewFacetTolerances(nxopen.preferences.PartVisualizationShade.AdvViewToleranceType) and PartVisualizationShade.setAdvVisViewFacetTolerances(nxopen.preferences.PartVisualizationShade.AdvViewToleranceType, double, double, double, double) instead.

setAdvancedVisViewTolerance(PartVisualizationShade.AdvViewToleranceType) - Method in interface nxopen.preferences.PartVisualizationShade

Sets the tolerance for advanced visualization views.

setAdvancedVisViewUpdateMode(PartVisualizationShade.ViewUpdateModeType) - Method in interface nxopen.preferences.PartVisualizationShade

Sets the update mode for advanced visualization views.

setAdvancedVisViewWidthTolerance(double) - Method in interface nxopen.preferences.PartVisualizationShade

Deprecated.

Deprecated in NX8.0.0. Use PartVisualizationShade.getAdvVisViewFacetTolerances(nxopen.preferences.PartVisualizationShade.AdvViewToleranceType) and PartVisualizationShade.setAdvVisViewFacetTolerances(nxopen.preferences.PartVisualizationShade.AdvViewToleranceType, double, double, double, double) instead.

setAdvCompression(double) - Method in interface nxopen.ListCreator

License requirements: None.

setAdvVisAlignFacets(boolean) - Method in interface nxopen.display.FacetSettingsBuilder

License requirements: None.

setAdvVisAngleTol(FacetSettingsBuilder.AdvVisToleranceSetting, double) - Method in interface nxopen.display.FacetSettingsBuilder

Sets the angle tolerance for a given tolerance set for Advanced Visualization Views
License requirements: None.

setAdvVisEdgeTol(FacetSettingsBuilder.AdvVisToleranceSetting, double) - Method in interface nxopen.display.FacetSettingsBuilder

Sets the edge tolerance for a given tolerance set for Advanced Visualization Views
License requirements: None.

setAdvVisFaceTol(FacetSettingsBuilder.AdvVisToleranceSetting, double) - Method in interface nxopen.display.FacetSettingsBuilder

Sets the face tolerance for a given tolerance set for Advanced Visualization Views
License requirements: None.

setAdvVisFacetRatio(double) - Method in interface nxopen.display.FacetSettingsBuilder

Deprecated.

Deprecated in NX9.0.0. Refer to FacetSettingsBuilder.setAdvVisRefinementFactor(double) instead

setAdvVisFacetScale(FacetSettingsBuilder.FacetScale) - Method in interface nxopen.display.FacetSettingsBuilder

License requirements: None.

setAdvVisFacetScaleRatio(double) - Method in interface nxopen.preferences.PartVisualizationShade

Deprecated.

Deprecated in NX9.0.0. Refer to Display.FacetSettingsBuilder#setAdvVisRefinementFactor instead

setAdvVisFacetToViewRatio(FacetSettingsBuilder.FacetToViewRatio) - Method in interface nxopen.display.FacetSettingsBuilder

Deprecated.

Deprecated in NX9.0.0. Refer to FacetSettingsBuilder.setAdvVisFacetScale(nxopen.display.FacetSettingsBuilder.FacetScale) instead

setAdvVisFacetToViewScale(boolean) - Method in interface nxopen.preferences.PartVisualizationShade

Deprecated.

Deprecated in NX9.0.0. Refer to Display.FacetSettingsBuilder#setAdvVisFacetScale instead

setAdvVisRefinementFactor(double) - Method in interface nxopen.display.FacetSettingsBuilder

License requirements: None.

setAdvVisTolerance(FacetSettingsBuilder.AdvVisToleranceSetting) - Method in interface nxopen.display.FacetSettingsBuilder

License requirements: None.

setAdvVisUpdate(FacetSettingsBuilder.FacetUpdate) - Method in interface nxopen.display.FacetSettingsBuilder

License requirements: None.

setAdvVisViewFacetTolerances(PartVisualizationShade.AdvViewToleranceType, double, double, double, double) - Method in interface nxopen.preferences.PartVisualizationShade

Sets the edge, face, angle and width tolerances to be used with the specified tolerance set for Advanced Visualization views.

setAdvVisWidthTol(FacetSettingsBuilder.AdvVisToleranceSetting, double) - Method in interface nxopen.display.FacetSettingsBuilder

Sets the width tolerance for a given tolerance set for Advanced Visualization Views
License requirements: None.

setAFormula(boolean) - Method in interface nxopen.annotations.TableCellStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setAfter(String[]) - Method in interface nxopen.annotations.AppendedTextBuilder

Sets the appended text after the annotation
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setAfterText(String[]) - Method in interface nxopen.annotations.AppendedText

Sets the appended text after the annotation
License requirements: None.

setAfterText(String) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder

License requirements: None.

setAfterTextType(SearchModelViewBuilder.TextComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder

License requirements: None.

setAftOffset(BeamSectionOffsetOptions.Offset) - Method in interface nxopen.cae.BeamSectionOffsetOptions

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setAftPerpendicular(boolean) - Method in interface nxopen.annotations.BaseFrameBarBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setAftPerpendicularLabelColor(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setAftPerpendicularLabelFont(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setAftPerpendicularLabelItalicized(boolean) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setAftPerpendicularLabelWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setAftPerpendicularTicColor(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setAftPerpendicularTicDisplay(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setAftPerpendicularTicFont(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setAftPerpendicularTicLength(double) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setAftPerpendicularTicWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setAftPlane(Plane) - Method in interface nxopen.features.shipdesign.ExpansionDrawingBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setAfuAbscissaHeaderInfo(AfuAbscissaHeaderInfo) - Method in interface nxopen.cae.AfuData

Sets the abscissa header information data of the AFU Data Record
License requirements: nx_ftk ("NX Advanced Graphing")
.

setAfuFile(String) - Method in interface nxopen.motion.GraphBuilder

Deprecated.

Deprecated in NX11.0.0. Use Motion.GraphObjectBuilder instead.

setAfuHeaderId(AfuHeaderId) - Method in interface nxopen.cae.AfuData

Sets the AFU Header Id data of the AFU Data Record
License requirements: nx_ftk ("NX Advanced Graphing")
.

setAfuOrdinateHeaderInfo(AfuOrdinateHeaderInfo) - Method in interface nxopen.cae.AfuData

Sets the ordinate header information data of the AFU Data Record
License requirements: nx_ftk ("NX Advanced Graphing")
.

setAfuRecordZValue(DataManager.AfuRecordZValue) - Method in interface nxopen.cae.xyplot.Preference

License requirements: nx_ftk ("NX Advanced Graphing")
.

setAfuZHeaderInfo(AfuZHeaderInfo) - Method in interface nxopen.cae.AfuData

Sets the Z axis header information data of the AFU Data Record
License requirements: nx_ftk ("NX Advanced Graphing")
.

setAhpCoordinates(String, String, String) - Method in interface nxopen.HumanPosturePredictionBuilder

Set the AHP point by coordinates, L8, W8, H8
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setAhpPoint(Point) - Method in interface nxopen.HumanPosturePredictionBuilder

Set the AHP point by an existing point
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setAirTrapOption(boolean) - Method in interface nxopen.tooling.FlowDisplayBuilder

License requirements: ug_mold_design ("UG MOLD")
.

setAlgorithmChoice(PreTestSensorConfigBuilder.AlgorithmChoiceType) - Method in interface nxopen.cae.PreTestSensorConfigBuilder

License requirements: nx_correl_base ("FE Correlation")
.

setAlgorithmType(OptimizationBuilder.OptimizationAlgorithmType) - Method in interface nxopen.optimization.OptimizationBuilder

License requirements: None.

setAlias(String) - Method in interface nxopen.AttributeTemplatesBuilder

License requirements: None.

setAlias(String) - Method in interface nxopen.mechatronics.RuntimeFormulaParameterBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setAlign(boolean) - Method in interface nxopen.drawings.ViewStyleDetailBuilder

License requirements: drafting ("DRAFTING")
.

setAlign(boolean) - Method in interface nxopen.drawings.ViewStyleProjectedBuilder

License requirements: drafting ("DRAFTING")
.

setAlign(boolean) - Method in interface nxopen.drawings.ViewStyleSectionConstraintsBuilder

License requirements: drafting ("DRAFTING")
.

setAlignAdvVisViewFacetsAlongEdges(boolean) - Method in interface nxopen.preferences.PartVisualizationShade

Sets the state of whether facets should be aligned along common edges for Advanced Visualization Views
License requirements: None.

setAlignAt(OrientationAngleMethodsBuilder.AlignAtTypes) - Method in interface nxopen.features.shipdesign.OrientationAngleMethodsBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setAlignAxis(Axis) - Method in interface nxopen.geometricutilities.AlignmentMethodBuilder

Sets the alignment axis
License requirements: solid_modeling ("SOLIDS MODELING")
.

setAlignBreakPoints(boolean) - Method in interface nxopen.geometricutilities.FtmTransformCurvesBuilder

License requirements: None.

setAlignedCenterlines(boolean) - Method in interface nxopen.annotations.Centerline3dBuilder

License requirements: drafting ("DRAFTING")
.

setAlignMachineAxes(boolean) - Method in interface nxopen.cam.InspectionUVGridBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setAlignment(TextAlignment) - Method in interface nxopen.cae.xyplot.TextStyleSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setAlignment(SectionAnalysisExBuilder.AlignmentType) - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setAlignmentHint(Constraint.Alignment) - Method in interface nxopen.positioning.Constraint

Set a hint as to which alignment should be used by the solver for this constraint.

setAlignmentMethod(ContactMeshBuilder.AlignmentType) - Method in interface nxopen.cae.ContactMeshBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setAlignmentMethod(ViewPlacementBuilder.Method) - Method in interface nxopen.drawings.ViewPlacementBuilder

License requirements: drafting ("DRAFTING")
.

setAlignmentMethod(AlignStockBuilder.StockAlignmentMethod) - Method in interface nxopen.routing.AlignStockBuilder

License requirements: routing_base ("Routing Basic")
.

setAlignmentOption(ViewPlacementBuilder.Option) - Method in interface nxopen.drawings.ViewPlacementBuilder

License requirements: drafting ("DRAFTING")
.

setAlignmentOption(AestheticFaceBlendBuilder.AlignmentType) - Method in interface nxopen.features.AestheticFaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setAlignmentPosition(AlignmentPosition) - Method in interface nxopen.annotations.LetteringPreferences

Sets the align position
License requirements: None.

setAlignmentPosition(TableSectionStyleBuilder.AlignmentPositionType) - Method in interface nxopen.annotations.TableSectionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setAlignmentPosition(AlignmentPosition) - Method in interface nxopen.annotations.TitleBlockPreferences

License requirements: drafting ("DRAFTING")
.

setAlignmentType(InspectionAlignmentAssistantBuilder.AlignType) - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setAlignmentType(BracketBuilder.AlignmentTypes) - Method in interface nxopen.features.shipdesign.BracketBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setAlignmentType(MeshParameterData.Type) - Method in interface nxopen.MeshParameterData

Sets
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

setAlignmentVector(Direction) - Method in interface nxopen.drawings.ViewPlacementBuilder

License requirements: drafting ("DRAFTING")
.

setAlignOpName(String) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setAlignPoints(OnPathDimensionBuilder[]) - Method in interface nxopen.geometricutilities.AlignmentMethodBuilder

Set the Alignment Points when sections have been set up.

setAlignPosition(AlignmentPosition) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setAlignShadedViewFacetsAlongEdges(boolean) - Method in interface nxopen.preferences.PartVisualizationShade

Sets the state of whether facets should be aligned along common edges for Shaded Views
License requirements: None.

setAlignShape(boolean) - Method in interface nxopen.geometricutilities.CurveFitData

License requirements: None.

setAlignStartOrientation(boolean) - Method in interface nxopen.die.DrawDiePunchBuilder

Sets the align start orientation switch of the draw die punch casting, if true use the alignment point to define the start of the punch profile, if false use the default algorithm to define the start of the punch profile.

setAlignSymbolWithBaseline(boolean) - Method in interface nxopen.annotations.OrdinateDimensionPreferences

Sets the flag indicating whether to align the user defined symbol with the base line
License requirements: None.

setAlignSymbolWithBaseline(boolean) - Method in interface nxopen.annotations.OrdinateStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setAlignTargetEdgeNodes(boolean) - Method in interface nxopen.cae.ContactMeshBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setAlignType(InspectionAlignmentBuilder.AlignTypes) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setAlignType(AlignmentMethodBuilder.Type) - Method in interface nxopen.geometricutilities.AlignmentMethodBuilder

Sets the alignment type
License requirements: solid_modeling ("SOLIDS MODELING")
.

setAlignVector(boolean) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setAlignVector(Direction) - Method in interface nxopen.features.shipdesign.OrientationAngleMethodsBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setAlignVector(Direction) - Method in interface nxopen.geometricutilities.AlignmentMethodBuilder

Sets the alignment vector
License requirements: solid_modeling ("SOLIDS MODELING")
.

setAlignVector(Axis) - Method in interface nxopen.geometricutilities.ModlMotion

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setAlignVector(Vector3d) - Method in interface nxopen.routing.IAxisPort

Sets the align vector of Port
License requirements: routing_base ("Routing Basic")
.

setALL() - Method in interface nxopen.features.WaveInterfaceLinkerBuilder

Set all objects as chosen
License requirements: None.

setAllAroundSymbol(double) - Method in interface nxopen.annotations.LineAndArrowPreferences

License requirements: None.

setAllAroundSymbolSize(double) - Method in interface nxopen.annotations.LineArrowStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setAllAttributesChanged() - Method in interface nxopen.weld.CharacteristicsBuilder

Sets all attributes to be changed.

setAllAttributesChanged(boolean) - Method in interface nxopen.weld.CharacteristicsBuilder

Sets all attributes changed value to the status value.

setAllButWork(int) - Method in interface nxopen.uf.UFLayer

Refer to UF_LAYER_set_all_but_work for documentation.

setAllChecks() - Method in interface nxopen.geometricanalysis.ExamineGeometry

Set all types of checks to examine
License requirements: None.

setAllCommonColor() - Method in interface nxopen.cam.PathDisplayColors

Set the color to all common
License requirements: cam_base ("CAM BASE")
.

setAllConstraints() - Method in interface nxopen.SketchAutoConstrainBuilder

Set all of the individual constraints (turn toggle to on for each one)
License requirements: solid_modeling ("SOLIDS MODELING")
.

setAllData(Point3d, Point3d, Vector3d, Vector3d, double, double, double, double, boolean, boolean, HealMethod, SplineOptions) - Method in interface nxopen.routing.HealPath

Set all the data associated with the heal path creation.

setAllGroupsVisible() - Method in interface nxopen.ExpressionGroupCollection

Make all expression groups visible
License requirements: None.

setAllIndividualExtensions(double[]) - Method in interface nxopen.annotations.CenterlineBuilder

Sets all individual extensions
License requirements: drafting ("DRAFTING")
.

setAllInstances(boolean) - Method in interface nxopen.features.ChamferBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAllInstancesOption(boolean) - Method in interface nxopen.features.EdgeBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAllLevelsOfDetail(boolean) - Method in interface nxopen.VRMLImporter

Sets the All Levels of Detail flag.

setAllMeshContext(boolean) - Method in interface nxopen.cae.ThicknessBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setAllOptionsToAnalyze() - Method in interface nxopen.facet.CleanupFacetBodyBuilder

Sets all cleanup options to Facet.CleanupFacetBodyBuilder.CleanupOptions#ANALYZE , which means to identify the defects only for the input bodies
License requirements: studio_free_form ("STUDIO FREE FORM")

Created in NX10.0.0

setAllOptionsToNone() - Method in interface nxopen.facet.CleanupFacetBodyBuilder

Sets all cleanup options to Facet.CleanupFacetBodyBuilder.CleanupOptions#NONE , which means to do nothing
License requirements: studio_free_form ("STUDIO FREE FORM")

Created in NX10.0.0

setAllOptionsToRepair() - Method in interface nxopen.facet.CleanupFacetBodyBuilder

Sets all cleanup options to Facet.CleanupFacetBodyBuilder.CleanupOptions#REPAIR , which means to identify as well as repair the defects for the input bodies
License requirements: studio_free_form ("STUDIO FREE FORM")

Created in NX10.0.0

setAllowableThickening(double) - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setAllowableThinning(double) - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setAllowance(double) - Method in interface nxopen.geometricutilities.ReplAsstBuilder

License requirements: None.

setAllowanceValue(double) - Method in interface nxopen.features.shipdesign.MaterialAllowanceBuilder

License requirements: nx_ship_mfg_prep ("Ship Manufacturing")
.

setAllowArcs(boolean) - Method in interface nxopen.routing.ConnectedCurvesBuilder

Sets the flag that allows traversal of arcs when finding connected curves.

setAllowBroken(boolean) - Method in interface nxopen.weld.FilletBuilder

License requirements: ugweld ("UG WELD")
.

setAllowConvergentObject(boolean) - Method in interface nxopen.blockstyler.BodyCollector

License requirements: None.

setAllowConvergentObject(boolean) - Method in interface nxopen.blockstyler.CurveCollector

License requirements: None.

setAllowConvergentObject(boolean) - Method in interface nxopen.blockstyler.FaceCollector

License requirements: None.

setAllowConvergentObject(boolean) - Method in interface nxopen.blockstyler.SectionBuilder

License requirements: None.

setAllowConvergentObject(boolean) - Method in interface nxopen.blockstyler.SelectObject

License requirements: None.

setAllowConvergentObject(boolean) - Method in interface nxopen.blockstyler.SuperPoint

License requirements: None.

setAllowConvergentObject(boolean) - Method in interface nxopen.blockstyler.SuperSection

License requirements: None.

setAllowCutElbow(boolean) - Method in interface nxopen.routing.LinearPathSettings

License requirements: routing_pipetube ("Routing Piping and Tubing")
.

setAllowDeleteMembers(boolean) - Method in interface nxopen.features.FeatureGroup

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAllowDeleteMembers(boolean) - Method in interface nxopen.features.PartModule

License requirements: usr_defined_features ("USER DEFINED FEATURES")
.

setAllowDeselectForSingleSelect(boolean) - Method in interface nxopen.blockstyler.ListBox

License requirements: None.

setAllowDuplicates(boolean) - Method in interface nxopen.annotations.BaseOrdinateDimensionBuilder

License requirements: drafting ("DRAFTING")
.

setAllowedCorners(RoutingPath.AllowedCornerType[]) - Method in interface nxopen.preferences.RoutingPath

License requirements: routing_base ("Routing Basic")
.

setAllowedCurves(RoutingPath.CurveType[]) - Method in interface nxopen.preferences.RoutingPath

License requirements: routing_base ("Routing Basic")
.

setAllowedEntityTypes(Section.AllowTypes) - Method in interface nxopen.Section

Set the Allowed Entity Types.

setAllowEditingOfDimensionOfInternalSketch(boolean) - Method in interface nxopen.preferences.SessionModeling

License requirements: None.

setAllowFeetInchFractionForDimensionGreaterThan(boolean) - Method in interface nxopen.drafting.AutomationPreferencesBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setAllowHeadAndEyeRotation(boolean) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setAllowInchFractionToNearest(boolean) - Method in interface nxopen.drafting.AutomationPreferencesBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setAllowInferredCurveSelection(boolean) - Method in interface nxopen.blockstyler.CurveCollector

License requirements: None.

setAllowInferredCurveSelection(boolean) - Method in interface nxopen.blockstyler.SectionBuilder

License requirements: None.

setAllowInferredCurveSelection(boolean) - Method in interface nxopen.blockstyler.SuperSection

License requirements: None.

setAllowInsideGeometry(boolean) - Method in interface nxopen.drafting.AutomationRuleBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setAllowInternationalTextInput(boolean) - Method in interface nxopen.blockstyler.StringBlock

License requirements: None.

setAllowLines(boolean) - Method in interface nxopen.routing.ConnectedCurvesBuilder

Sets the flag that allows traversal of lines when finding connected curves.

setAllowManualRows(boolean) - Method in interface nxopen.annotations.PartsListBuilder

License requirements: None.

setAllowMultipleConnections(boolean) - Method in interface nxopen.routing.Port

Sets the Allow Multiple Connections property for a Port .

setAllowMultipleValues(boolean) - Method in interface nxopen.AttributeTemplatesBuilder

License requirements: None.

setAllowNewCables(boolean) - Method in interface nxopen.routing.electrical.CablewaysBuilder

License requirements: routing_cabling ("Routing Cabling")
.

setAllowOccs(boolean) - Method in interface nxopen.routing.ConnectedCurvesBuilder

Sets the flag that allows traversal of curve occurrences when finding connected curves.

setAllowOversizeTool(boolean) - Method in interface nxopen.cam.HoleMakingBuilder

License requirements: cam_base ("CAM BASE")
.

setAllowOwnedObjectSelectionOption(UserDefinedClass.AllowOwnedObjectSelection) - Method in interface nxopen.userdefinedobjects.UserDefinedClass

Sets the allow owned object selection flag.

setAllowPatch(boolean) - Method in interface nxopen.tooling.EdgePatchBuilder

License requirements: None.

setAllowPostureValueOutOfRange(boolean) - Method in interface nxopen.features.vehicledesign.ManikinBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setAllowQueryClassFromName(UserDefinedClass.AllowQueryClass) - Method in interface nxopen.userdefinedobjects.UserDefinedClass

Sets the allow query class from name flag.

setAllowRefCrvs(boolean) - Method in interface nxopen.Section

Sets to the section whether to allow reference curves or not.

setAllowRotation(boolean) - Method in interface nxopen.linedesigner.PickRectanglePointsBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setAllowSelfIntersection(boolean) - Method in interface nxopen.features.CompositeCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setAllowShortcuts(boolean) - Method in interface nxopen.blockstyler.Enumeration

License requirements: None.

setAllowSlip(boolean) - Method in interface nxopen.mechatronics.CouplingBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setAllowSplines(boolean) - Method in interface nxopen.routing.ConnectedCurvesBuilder

Sets the flag that allows traversal of splines when finding connected curves.

setAllowStopAtIntersectionFollowFillet(boolean) - Method in interface nxopen.blockstyler.SectionBuilder

License requirements: None.

setAllowStopAtIntersectionFollowFillet(boolean) - Method in interface nxopen.blockstyler.SuperSection

License requirements: None.

setAllowSubstitution(boolean) - Method in interface nxopen.LoadOptions

Sets the allow substition option.

setAllowTargetEdgesAsToolObjects(boolean) - Method in interface nxopen.features.TrimSheetBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAllowTemporaryPartsToReplace(boolean) - Method in interface nxopen.assemblies.ReplaceComponentBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setAllowTransitionCurveOnBlends(boolean) - Method in interface nxopen.features.BlendCornerBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setAllowUndercut(boolean) - Method in interface nxopen.cam.TurnCutParameters

License requirements: cam_base ("CAM BASE")
.

setAllowUndercutting(boolean) - Method in interface nxopen.cam.MillCutParameters

License requirements: cam_base ("CAM BASE")
.

setAllPlanesGeometry(Point3d[], Matrix3x3[]) - Method in interface nxopen.display.DynamicSectionBuilder

Sets geometry for all planes of the section.

setAllRegionUdosSelected(int) - Method in interface nxopen.tooling.MWDefineSheetsBuilder

Set the flag to indicate if the node for all the region UDOs in the tree list is selected
License requirements: None.

setAllReverseDirectionFlags(boolean[]) - Method in interface nxopen.tooling.OffsetCurve3DBuilder

Deprecated.

Deprecated in NX10.0.0. Please use Offset3DCurveBuilder.flipOffsetCurveDirection(nxopen.ICurve, nxopen.Point3d, boolean) instead

setAllroundSymbol(boolean) - Method in interface nxopen.annotations.LineWeldData

Sets the flag indicating whether the allround symbol is displayed
License requirements: None.

setAllSameColor(boolean) - Method in interface nxopen.geometricutilities.ColorCodedRegionBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setAllSelected() - Method in interface nxopen.uistyler.MultiSelectList

Specifies all list entry to be selected.

setAllSynchronizeFlags(boolean) - Method in interface nxopen.cae.FemSynchronizeOptions

Sets all the synchronize options to the given boolean value
License requirements: None.

setAlongDirection(SnipFacetBodyBuilder.DirectionType) - Method in interface nxopen.facet.SnipFacetBodyBuilder

License requirements: None.

setAlongDirection(DieBaseBuilder.AlongDirectionOpt) - Method in interface nxopen.tooling.DieBaseBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setAlongFaceNormal(boolean) - Method in interface nxopen.features.sheetmetal.MigratedPanelBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setAlongOrientationOption(PatternOrientation.Enum) - Method in interface nxopen.geometricutilities.PatternOrientation

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setAlternate(PlaneTypes.AlternateType) - Method in interface nxopen.IPlane

Sets the alternate type
License requirements: None.

setAlternateDescription(String) - Method in interface nxopen.pdm.AlternateIdManager

Sets the value of the alternate description.

setAlternateIdAsDefaultIndentifier(boolean) - Method in interface nxopen.pdm.AlternateIdManager

Sets whether the alternate ID information should be the default indentifier.

setAlternateIdInformation(String, String, String, String, String, String, boolean) - Method in interface nxopen.pdm.AlternateIdManager

Sets alternate ID information on this manager class. null can be specified for parameters which are set via other set or assign methods on this builder.

setAlternateItemId(String) - Method in interface nxopen.pdm.AlternateIdManager

Sets the value of the alternate item ID.

setAlternateMethod(int) - Method in interface nxopen.features.SectionSurfaceBuilder

Deprecated.

Deprecated in NX9.0.0. Use SectionSurfaceBuilderEx instead.

setAlternateMethod(boolean) - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder

License requirements: None.

setAlternateName(String) - Method in interface nxopen.pdm.AlternateIdManager

Sets the value of the alternate name.

setAlternatename(String) - Method in interface nxopen.PhysicalMaterial

Sets the material alternate name
License requirements: None.

setAlternateResult(boolean) - Method in interface nxopen.tooling.BendOperationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setAlternateRevId(String) - Method in interface nxopen.pdm.AlternateIdManager

Sets the value of the alternate rev ID.

setAlternateSolution(DatumConstraint.Solution) - Method in interface nxopen.DatumConstraint

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAlternateSolution(boolean) - Method in interface nxopen.features.sheetmetal.BridgeTransitionBuilder

License requirements: nx_flexible_pcb ("NX Flexible PCB") OR nx_sheet_metal ("NX Sheet Metal")
.

setAlternateSolution(int) - Method in interface nxopen.features.StyledSweepBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setAlternateSolutions(int) - Method in interface nxopen.features.SectionSurfaceBuilderEx

License requirements: None.

setAlternateSolutionType(DatumAxisBuilder.AlternateSolution) - Method in interface nxopen.features.DatumAxisBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setAlternativeAngle(boolean) - Method in interface nxopen.features.AngularDimBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setAlterResult(boolean) - Method in interface nxopen.tooling.DirectUnbendBuilder

License requirements: None.

setAltRepDisplayStyle(FEModelOccAttribute.AltRepDisplayStyle) - Method in interface nxopen.cae.FEModelOccAttribute

Se tthe alternate representation display style
License requirements: nx_masterfem ("Finite Element Modeling")
.

setAlwaysEvaluated(boolean) - Method in interface nxopen.motion.SignalChartListItem

License requirements: nx_motion_motor ("NX Motion Motor")
.

setAlwaysUpdateDialogs(boolean) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setAlwaysVertical(boolean) - Method in interface nxopen.annotations.DatumData

Sets the flag indicating whether the datum is always vertical (without the stub)
License requirements: None.

setAmAddPasses(int) - Method in interface nxopen.cam.AreaMillingNonSteepContainment

License requirements: None.

setAmAddPasses(int) - Method in interface nxopen.cam.DmAmBuilder

License requirements: None.

setAmAutoPatCenter(AreaMillingNonSteepContainment.AutoPatCenterTypes) - Method in interface nxopen.cam.AreaMillingNonSteepContainment

License requirements: None.

setAmAutoPatCenter(DmAmBuilder.AutoPatCenterTypes) - Method in interface nxopen.cam.DmAmBuilder

License requirements: None.

setAmbientOcclusion(boolean) - Method in interface nxopen.display.Shadows

License requirements: None.

setAmbientTempFunction(MotionFunction) - Method in interface nxopen.motion.TirePropertyCdBuilder

License requirements: mechanisms ("MECHANISMS")
.

setAmbientTempTypeSelection(TirePropertyCdBuilder.AmbientTempType) - Method in interface nxopen.motion.TirePropertyCdBuilder

License requirements: mechanisms ("MECHANISMS")
.

setAmCutPattern(DmAmBuilder.AmCutPatternTypes) - Method in interface nxopen.cam.DmAmBuilder

License requirements: None.

setAmCutRegionStartEnum(DmAmBuilder.AmCustomStartTypes) - Method in interface nxopen.cam.DmAmBuilder

License requirements: None.

setAmCutTraversal(DmAmBuilder.AmCutTraversalTypes) - Method in interface nxopen.cam.DmAmBuilder

License requirements: None.

setAmplitude(double) - Method in interface nxopen.motion.DriverOperation

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using DriverOperation.amplitudeExpression() to query or edit it.

setAmPocketDir(AreaMillingNonSteepContainment.AmPocketDirTypes) - Method in interface nxopen.cam.AreaMillingNonSteepContainment

License requirements: None.

setAmPocketDir(AreaMillingNonSteepContainment.AmPocketDirTypes) - Method in interface nxopen.cam.DmAmBuilder

License requirements: None.

setAmSteepOption(DmAmBuilder.SteepOptTypes) - Method in interface nxopen.cam.DmAmBuilder

License requirements: None.

setAnalyMode(ValidCheckBuilder.AnalysisMode) - Method in interface nxopen.tooling.ValidCheckBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAnalysisDisplay(Tag, UFCurve.AnalysisDisplay) - Method in interface nxopen.uf.UFCurve

Deprecated.

The equivalent Open C method has retired

setAnalysisMode(Tag, int) - Method in interface nxopen.uf.UFClear

Deprecated.

The equivalent Open C method has retired

setAnalysisPoint(Point) - Method in interface nxopen.geometricanalysis.DupinBuilder

License requirements: None.

setAnalysisRecord(Curve, CurveAnalysisRecord) - Method in interface nxopen.geometricanalysis.CurveAnalysisDisplay

Deprecated.

Deprecated in NX8.5.0. Use CurveCurvatureAnalysis .

setAnalysisSolution(SimSolution) - Method in interface nxopen.cae.optimization.DAOSolutionBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setAnalysisSpacing(double) - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setAnalysisType(RSEvent.AnalysisType) - Method in interface nxopen.cae.responsesimulation.RSEventAttributes

License requirements: nx_response_anlys ("NX Response Analysis")
.

setAnalysisType(NCAssistantBuilder.AnalysisTypes) - Method in interface nxopen.cam.NCAssistantBuilder

License requirements: cam_base ("CAM BASE")
.

setAnalysisType(CombOptionsBuilder.AnalysisTypes) - Method in interface nxopen.geometricutilities.CombOptionsBuilder

License requirements: None.

setAnalysisType(MotionEnvironment.Analysis) - Method in interface nxopen.motion.MotionEnvironment

Sets the the analysis type
License requirements: mechanisms ("MECHANISMS")
.

setAnalysisType(MotionSolutionBuilder.AnalysisTypes) - Method in interface nxopen.motion.MotionSolutionBuilder

License requirements: mechanisms ("MECHANISMS")
.

setAnchor(Point) - Method in interface nxopen.annotations.BaseCustomSymbol

Sets the master custom symbol anchor point.

setAnchor(Point) - Method in interface nxopen.annotations.MasterCustomSymbolData

Deprecated.

Deprecated in NX9.0.0. Use MasterSymbolBuilder instead.

setAnchor(OriginBuilder.AlignmentPosition) - Method in interface nxopen.annotations.OriginBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING")
.

setAnchor(RegionBuilder.AlignmentPosition) - Method in interface nxopen.annotations.RegionBuilder

License requirements: geometric_tol ("GDT")
.

setAnchor(Anchor) - Method in interface nxopen.routing.Stock

Sets the Anchor .

setAnchorageLocation(SeatBeltAnchorageBuilder.AnchorageLocationTypes) - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setAnchorAttachment(ShapeFrameBuilder.AnchorAttachmentType) - Method in interface nxopen.geometricutilities.ShapeFrameBuilder

License requirements: None.

setAnchorCenter(boolean) - Method in interface nxopen.display.NonProportionalZoom

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setAnchorLocation(FrameOnPathBuilder.AnchorLocationType) - Method in interface nxopen.geometricutilities.FrameOnPathBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAnchorLocation(RectangularFrameBuilder.AnchorLocationType) - Method in interface nxopen.geometricutilities.RectangularFrameBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAnchorObject(DisplayableObject) - Method in interface nxopen.markup.MarkupObject

License requirements: None.

setAnchorOrigin(Point3d) - Method in interface nxopen.geometricanalysis.sectionanalysis.XYZPlaneBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setAnchorPoint(Point) - Method in interface nxopen.annotations.MasterSymbolBuilder

License requirements: drafting ("DRAFTING")
.

setAnchorPoint(Point) - Method in interface nxopen.features.GeneralConicBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setAnchorPoint(int) - Method in interface nxopen.features.shipdesign.PillarBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setAnchorPoint(int) - Method in interface nxopen.features.shipdesign.PillarSystemBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setAnchorPoint(int) - Method in interface nxopen.features.shipdesign.StiffenerStockBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setAnchorPoint(Point) - Method in interface nxopen.layout2d.DefineComponentAnchorPointBuilder

License requirements: nx_layout ("NX Layout")
.

setAnchorPoint(Point) - Method in interface nxopen.layout2d.DefineComponentBuilder

License requirements: nx_layout ("NX Layout")
.

setAnchorPoint(Point) - Method in interface nxopen.mechatronics.BallJointBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setAnchorPoint(Point) - Method in interface nxopen.mechatronics.CylindricalJointBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setAnchorPoint(Point) - Method in interface nxopen.mechatronics.VirtualAxisBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setAnchorPosition(CurveRangeBuilder.AnchorPositionType) - Method in interface nxopen.geometricutilities.CurveRangeBuilder

Sets the anchor position
License requirements: None.

setAnchorPosition(SurfaceRangeBuilder.AnchorPositionType) - Method in interface nxopen.geometricutilities.SurfaceRangeBuilder

Sets the anchor position
License requirements: None.

setAnchors(Anchor[]) - Method in interface nxopen.routing.StockData

Sets the list of Anchor objects associated with this StockData .

setAnchorType(DecalBuilder.Anchor) - Method in interface nxopen.display.DecalBuilder

License requirements: None.

setAnchorXAxis(Vector3d) - Method in interface nxopen.geometricanalysis.sectionanalysis.XYZPlaneBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setAnchorYAxis(Vector3d) - Method in interface nxopen.geometricanalysis.sectionanalysis.XYZPlaneBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setAngle(double) - Method in interface nxopen.annotations.Associativity

Sets the angle.

setAngle(double) - Method in interface nxopen.annotations.AssociativityBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setAngle(double) - Method in interface nxopen.annotations.CenterMarkSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setAngle(double) - Method in interface nxopen.annotations.CustomSymbolData

Deprecated.

Deprecated in NX9.0.0. Use DraftingCustomSymbolBuilder for Drafting Custom Symbol and PmiCustomSymbolBuilder for PMI Custom Symbol objects.

setAngle(double) - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder

License requirements: drafting ("DRAFTING")
.

setAngle(double) - Method in interface nxopen.annotations.ForeshorteningSymbolSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setAngle(double) - Method in interface nxopen.annotations.HatchBuilder

Deprecated.

Deprecated in NX7.5.0. Use HatchFillSettingsBuilder instead.

setAngle(double) - Method in interface nxopen.annotations.HatchFillSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setAngle(double) - Method in interface nxopen.annotations.LetteringPreferences

Sets the angle
License requirements: None.

setAngle(double) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setAngle(double) - Method in interface nxopen.annotations.SurfaceFinishBuilder

License requirements: None.

setAngle(double) - Method in interface nxopen.annotations.TargetPointBuilder

License requirements: drafting ("DRAFTING")
.

setAngle(double) - Method in interface nxopen.cam.BoundaryTurnMemberCorner

License requirements: cam_base ("CAM BASE")
.

setAngle(double) - Method in interface nxopen.cam.FormEdgesBuilder

License requirements: cam_base ("CAM BASE")
.

setAngle(double) - Method in interface nxopen.cam.LaserCutoutDefinition

License requirements: cam_base ("CAM BASE")
.

setAngle(double) - Method in interface nxopen.cam.NormalToToolAxisMoveBuilder

License requirements: None.

setAngle(double) - Method in interface nxopen.cam.RotateToolMoveBuilder

License requirements: None.

setAngle(double) - Method in interface nxopen.cam.ToolAxisTilt

License requirements: cam_base ("CAM BASE")
.

setAngle(double) - Method in interface nxopen.cam.TurnEngageRetractBuilder

License requirements: cam_base ("CAM BASE")
.

setAngle(double) - Method in interface nxopen.cam.TurnThreadEngageRetractBuilder

License requirements: cam_base ("CAM BASE")
.

setAngle(double) - Method in interface nxopen.die.FlangeSteelRibChildBuilder

Sets the angle of the Flange Steel Rib
License requirements: ug_die_design ("Die Design")
.

setAngle(double) - Method in interface nxopen.die.FlangeSteelRibParentBuilder

Sets the angle of the Flange Steel Ribs
License requirements: ug_die_design ("Die Design")
.

setAngle(double) - Method in interface nxopen.die.RibChildBuilder

Sets the angle of the die rib.

setAngle(double) - Method in interface nxopen.die.RibParentBuilder

Sets the angle of die ribs.

setAngle(double) - Method in interface nxopen.drawings.GeneralViewStyle

Sets the value of angle of a member view.

setAngle(String) - Method in interface nxopen.features.ChamferBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAngle(String) - Method in interface nxopen.features.EmbossSidewall

Set the sidewall defaults taper angle
License requirements: solid_modeling ("SOLIDS MODELING")
.

setAngle(String) - Method in interface nxopen.features.EmbossTaper

Taper angle expression formula string
License requirements: solid_modeling ("SOLIDS MODELING")
.

setAngle(String) - Method in interface nxopen.features.sheetmetal.AeroFlangeBuilder

Set the angle expression.

setAngle(String) - Method in interface nxopen.features.sheetmetal.BeadBuilder

Deprecated.

Deprecated in NX10.0.0. Use Expression.setRightHandSide(java.lang.String) on the Expression object returned from BeadBuilder.angle() instead.

setAngle(double) - Method in interface nxopen.geometricanalysis.DupinBuilder

License requirements: None.

setAngle(int, double) - Method in interface nxopen.geometricutilities.CircularFrameBuilder

Sets the i-th angle of the circular frame
License requirements: None.

setAngle(String) - Method in interface nxopen.geometricutilities.DraftPointData

Sets the Angle value
License requirements: solid_modeling ("SOLIDS MODELING")
.

setAngle(String) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder

License requirements: None.

setAngle01(double) - Method in interface nxopen.tooling.PrebendBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setAngle02(double) - Method in interface nxopen.tooling.PrebendBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setAngle03(double) - Method in interface nxopen.tooling.PrebendBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setAngle04(double) - Method in interface nxopen.tooling.PrebendBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setAngle05(double) - Method in interface nxopen.tooling.PrebendBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setAngle1(double) - Method in interface nxopen.cam.ProbeInspectBorebossMoveBuilder

License requirements: None.

setAngle1(double) - Method in interface nxopen.tooling.DirectUnfoldBuilder

License requirements: None.

setAngle2(double) - Method in interface nxopen.cam.ProbeInspectBorebossMoveBuilder

License requirements: None.

setAngle2(double) - Method in interface nxopen.tooling.DirectUnfoldBuilder

License requirements: None.

setAngle3(double) - Method in interface nxopen.cam.ProbeInspectBorebossMoveBuilder

License requirements: None.

setAngle3(double) - Method in interface nxopen.tooling.DirectUnfoldBuilder

License requirements: None.

setAngle4(double) - Method in interface nxopen.tooling.DirectUnfoldBuilder

License requirements: None.

setAngle5(double) - Method in interface nxopen.tooling.DirectUnfoldBuilder

License requirements: None.

setAngle6(double) - Method in interface nxopen.tooling.DirectUnfoldBuilder

License requirements: None.

setAngleA(double) - Method in interface nxopen.cam.InspectionCreatePathsBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setAngleA(double) - Method in interface nxopen.cam.InspectionLinkPmiBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setAngleA(double) - Method in interface nxopen.cam.InspectionMoveBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setAngleA(double) - Method in interface nxopen.cam.InspectionSensorBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setAngleA(double) - Method in interface nxopen.cam.InspectionSensorMassEditBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setAngleAbout(Direction) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setAngleAlignmentPoints(Point3d, Point3d) - Method in interface nxopen.features.MeshSurfaceBuilder

Set angle alignment points.

setAngleB(double) - Method in interface nxopen.cam.InspectionCreatePathsBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setAngleB(double) - Method in interface nxopen.cam.InspectionLinkPmiBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setAngleB(double) - Method in interface nxopen.cam.InspectionMoveBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setAngleB(double) - Method in interface nxopen.cam.InspectionSensorBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setAngleB(double) - Method in interface nxopen.cam.InspectionSensorMassEditBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setAngleCorrected(boolean) - Method in interface nxopen.features.LawExtensionBuilderEx

License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING")
.

setAngleDecimalPointCharacter(DecimalPointCharacter) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder

License requirements: drafting ("DRAFTING")
.

setAngleDecimalPointFormat(DecimalPointCharacter) - Method in interface nxopen.drawings.GeneralViewStyle

Sets the decimal point character to use for view angle display.

setAngleDecimalPointFormat(DecimalPointCharacter) - Method in interface nxopen.preferences.GeneralViewPreferences

Sets the decimal point character to use for view angle display.

setAngledWallSolution(BlendPocketBuilder.AngledWallSolutions) - Method in interface nxopen.features.BlendPocketBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAngleEndPoint(Point) - Method in interface nxopen.cam.InspectionOperationTransformBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setAngleEndPoint(Point) - Method in interface nxopen.cam.OperationTransformBuilder

License requirements: cam_base ("CAM BASE")
.

setAngleEnum(CorrelFineTuneAlignmentBuilder.AngleVector) - Method in interface nxopen.cae.CorrelFineTuneAlignmentBuilder

License requirements: nx_correl_base ("FE Correlation")
.

setAngleFormat(AngleFormat) - Method in interface nxopen.drawings.GeneralViewStyle

Sets the format to use for view angle display.

setAngleFormat(AngleFormat) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder

License requirements: drafting ("DRAFTING")
.

setAngleFormat(AngleFormat) - Method in interface nxopen.preferences.GeneralViewPreferences

Sets the format to use for view angle display.

setAngleIncrement(double) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setAngleMethod(InspectionOperationTransformBuilder.Angle) - Method in interface nxopen.cam.InspectionOperationTransformBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setAngleMethod(OperationTransformBuilder.Angle) - Method in interface nxopen.cam.OperationTransformBuilder

License requirements: cam_base ("CAM BASE")
.

setAngleMethod(OrientationAngleMethodsBuilder.MethodTypes) - Method in interface nxopen.features.shipdesign.OrientationAngleMethodsBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setAngleNoseIgnorableSize(double) - Method in interface nxopen.tooling.FaceColorManagementBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setAngleOption(ElementRevolveBuilder.AngleType) - Method in interface nxopen.cae.ElementRevolveBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setAngleOption(TrimPoint.AngleOptions) - Method in interface nxopen.cam.TrimPoint

License requirements: cam_base ("CAM BASE")
.

setAngleOption(PlateChamferBuilder.AngleMethod) - Method in interface nxopen.features.shipdesign.PlateChamferBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setAngleOption(MultiDraft.AngleOption) - Method in interface nxopen.geometricutilities.MultiDraft

Sets the draft angle option
License requirements: solid_modeling ("SOLIDS MODELING")
.

setAnglePivotPoint(Point) - Method in interface nxopen.cam.InspectionOperationTransformBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setAnglePivotPoint(Point) - Method in interface nxopen.cam.OperationTransformBuilder

License requirements: cam_base ("CAM BASE")
.

setAnglePrecision(int) - Method in interface nxopen.drawings.GeneralViewStyle

Sets the precision to use for view angle display.

setAnglePrecision(int) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder

License requirements: drafting ("DRAFTING")
.

setAnglePrecision(int) - Method in interface nxopen.preferences.GeneralViewPreferences

Sets the precision to use for view angle display.

setAngleReference(Plane) - Method in interface nxopen.features.shipdesign.OrientationAngleMethodsBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setAngleResult(double) - Method in interface nxopen.tooling.BlankNestingBuilder

License requirements: None.

setAngleRule(ShipDesignPreferencesBuilder.AngleRuleTypes) - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setAngleShowLeadingZeros(boolean) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder

License requirements: drafting ("DRAFTING")
.

setAngleShowTrailingZeros(boolean) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder

License requirements: drafting ("DRAFTING")
.

setAnglesNormal(OrientationRegionItemBuilder[]) - Method in interface nxopen.features.shipdesign.OrientationDefinitionBuilder

Will set all angle values of input regions so that web is normal to surface.

setAngleStartPoint(Point) - Method in interface nxopen.cam.InspectionOperationTransformBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setAngleStartPoint(Point) - Method in interface nxopen.cam.OperationTransformBuilder

License requirements: cam_base ("CAM BASE")
.

setAngleStep(double) - Method in interface nxopen.tooling.BlankNestingBuilder

License requirements: None.

setAngleString(String) - Method in interface nxopen.cam.InspectionCreatePathsBuilder

Deprecated.

Deprecated in NX9.0.0. Use AngleA and AngleB instead.

setAngleString(String) - Method in interface nxopen.cam.InspectionLinkPmiBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setAngleThreshold(double) - Method in interface nxopen.facet.DecimateFacetBodyBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setAngleThreshold(double) - Method in interface nxopen.facet.SubdivideFacetBodyBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setAngleThreshold(double) - Method in interface nxopen.features.OptimizeCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAngleToggle(boolean) - Method in interface nxopen.cam.ToolChangeCiBuilder

License requirements: cam_base ("CAM BASE")
.

setAngleTol(double) - Method in interface nxopen.features.SphericalCornerBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAngleTolerance(double) - Method in interface nxopen.cam.InspectionOperationTransformBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setAngleTolerance(double) - Method in interface nxopen.cam.NCAssistantBuilder

License requirements: cam_base ("CAM BASE")
.

setAngleTolerance(double) - Method in interface nxopen.cam.SurfaceRegions

License requirements: cam_base ("CAM BASE")
.

setAngleTolerance(double) - Method in interface nxopen.cam.Topology

License requirements: cam_base ("CAM BASE")
.

setAngleTolerance(double) - Method in interface nxopen.die.AddendumSectionBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setAngleTolerance(double) - Method in interface nxopen.die.CastReliefBuilder

License requirements: ug_die_design ("Die Design")
.

setAngleTolerance(double) - Method in interface nxopen.die.ClampingSlotBuilder

License requirements: ug_die_design ("Die Design")
.

setAngleTolerance(double) - Method in interface nxopen.die.ClearanceBuilder

License requirements: ug_die_design ("Die Design")
.

setAngleTolerance(double) - Method in interface nxopen.die.CompensateRoughDataBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAngleTolerance(double) - Method in interface nxopen.die.DieShoeBuilder

License requirements: ug_die_design ("Die Design")
.

setAngleTolerance(double) - Method in interface nxopen.die.DrawBeadBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setAngleTolerance(double) - Method in interface nxopen.die.DrawDiePunchBuilder

Sets the angle tolerance of the draw die punch casting.

setAngleTolerance(double) - Method in interface nxopen.die.FillAreaBuilder

License requirements: ug_die_design ("Die Design")
.

setAngleTolerance(double) - Method in interface nxopen.die.FillBuilder

Sets the angle tolerance of the area fill
License requirements: die_engineering ("DIE ENGINEERING")
.

setAngleTolerance(double) - Method in interface nxopen.die.FingerClearanceNotchBuilder

License requirements: ug_die_design ("Die Design")
.

setAngleTolerance(double) - Method in interface nxopen.die.FlangeTaskBuilder

Sets the angle tolerance of the flange task
License requirements: die_engineering ("DIE ENGINEERING")
.

setAngleTolerance(double) - Method in interface nxopen.die.FormTaskBuilder

Sets the angle tolerance of the form task.

setAngleTolerance(double) - Method in interface nxopen.die.HandlingCoreBuilder

License requirements: ug_die_design ("Die Design")
.

setAngleTolerance(double) - Method in interface nxopen.die.HeelpostBuilder

License requirements: ug_die_design ("Die Design")
.

setAngleTolerance(double) - Method in interface nxopen.die.KeywayBuilder

License requirements: ug_die_design ("Die Design")
.

setAngleTolerance(double) - Method in interface nxopen.die.MachineReliefBuilder

License requirements: ug_die_design ("Die Design")
.

setAngleTolerance(double) - Method in interface nxopen.die.OutputCurvesBuilder

Sets the angle tolerance.

setAngleTolerance(double) - Method in interface nxopen.die.PierceTaskBuilder

Sets the angle tolerance of the pierce task
License requirements: die_engineering ("DIE ENGINEERING")
.

setAngleTolerance(double) - Method in interface nxopen.die.RotorBuilder

Sets the angle tolerance of the rotor casting.

setAngleTolerance(double) - Method in interface nxopen.die.SpringbackCompensationBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR nx_freeform_2 ("advanced freeform modeling")
.

setAngleTolerance(double) - Method in interface nxopen.die.SteelInsertBuilder

Sets the angle tolerance of the diesteelinsert
License requirements: ug_die_design ("Die Design")
.

setAngleTolerance(double) - Method in interface nxopen.die.TrimTaskBuilder

Sets the angle tolerance of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.

setAngleTolerance(double) - Method in interface nxopen.drawings.ViewStyleShadingBuilder

License requirements: drafting ("DRAFTING")
.

setAngleTolerance(double) - Method in interface nxopen.facet.MergeFacetBodyBuilder

License requirements: None.

setAngleTolerance(double) - Method in interface nxopen.features.BlendCornerBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setAngleTolerance(double) - Method in interface nxopen.features.ConcaveFacesBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAngleTolerance(double) - Method in interface nxopen.features.CurveOnSurfaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAngleTolerance(double) - Method in interface nxopen.features.DraftBuilder

Sets the angle tolerance in [rad/deg]
License requirements: solid_modeling ("SOLIDS MODELING")
.

setAngleTolerance(double) - Method in interface nxopen.features.ExtractFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setAngleTolerance(double) - Method in interface nxopen.features.GlobalShapingBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAngleTolerance(double) - Method in interface nxopen.features.GuidedExtensionBuilderEx

License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setAngleTolerance(double) - Method in interface nxopen.features.HelixBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAngleTolerance(double) - Method in interface nxopen.features.JoinCurvesBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setAngleTolerance(double) - Method in interface nxopen.features.LawExtensionBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING")
.

setAngleTolerance(double) - Method in interface nxopen.features.LawExtensionBuilderEx

License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING")
.

setAngleTolerance(double) - Method in interface nxopen.features.OffsetEmbossBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAngleTolerance(double) - Method in interface nxopen.features.PointSetBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAngleTolerance(double) - Method in interface nxopen.features.RibbonBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAngleTolerance(double) - Method in interface nxopen.features.shipdesign.FeatureParmsBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setAngleTolerance(double) - Method in interface nxopen.features.shipdesign.MarkingLineBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setAngleTolerance(double) - Method in interface nxopen.features.shipdesign.MarkingLineDesignBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setAngleTolerance(double) - Method in interface nxopen.features.shipdesign.OrientationDefinitionBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setAngleTolerance(double) - Method in interface nxopen.features.shipdesign.PillarBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setAngleTolerance(double) - Method in interface nxopen.features.shipdesign.RollingLineBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setAngleTolerance(double) - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setAngleTolerance(double) - Method in interface nxopen.features.shipdesign.ShipPreparationBuilder

Deprecated.

Deprecated in NX11.0.0. Removed with no replacement.

setAngleTolerance(double) - Method in interface nxopen.features.WrapBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAngleTolerance(double) - Method in interface nxopen.geometricanalysis.DeviationChecking

License requirements: None.

setAngleTolerance(double) - Method in interface nxopen.geometricutilities.CurveFitData

License requirements: None.

setAngleTolerance(double) - Method in interface nxopen.geometricutilities.DisplayResolutionBuilder

License requirements: None.

setAngleTolerance(double) - Method in interface nxopen.geometricutilities.MatchSurfaceBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING")
.

setAngleTolerance(double) - Method in interface nxopen.routing.ElbowSnapSettings

Sets the tolerance within which to search for elbow angles.

setAngleTolerance(double) - Method in interface nxopen.Section

License requirements: gateway ("UG GATEWAY")
.

setAngleTolerance(double) - Method in interface nxopen.SketchAutoConstrainBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAngleTolerance(double) - Method in interface nxopen.SketchIntersectionCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setAngleTolerance(double) - Method in interface nxopen.tooling.GuidedExtensionBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING")
.

setAngleTolerance(double) - Method in interface nxopen.uf.UFModeling

Refer to UF_MODL_set_angle_tolerance for documentation.

setAngleToleranceData(double) - Method in interface nxopen.preferences.PartModeling

Sets the angle tolerance data.

setAngleToleranceEdges(double) - Method in interface nxopen.cam.GeometrySet

License requirements: cam_base ("CAM BASE")
.

setAngleToleranceValue(double) - Method in interface nxopen.tooling.FormingInsertBuilder

License requirements: None.

setAngleType(SearchModelViewBuilder.ValueComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder

License requirements: None.

setAngleType(BoundaryTurnMemberCorner.AngleValueType) - Method in interface nxopen.cam.BoundaryTurnMemberCorner

License requirements: cam_base ("CAM BASE")
.

setAngleType(ProbeInspectBorebossMoveBuilder.Angle) - Method in interface nxopen.cam.ProbeInspectBorebossMoveBuilder

License requirements: None.

setAngleType(InclinometerBuilder.OutputAngleType) - Method in interface nxopen.mechatronics.InclinometerBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setAngleValue(double) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder

License requirements: None.

setAngleValue(double) - Method in interface nxopen.cam.BoundaryTurnMemberFineFinishCorner

License requirements: cam_base ("CAM BASE")
.

setAngleValue(double) - Method in interface nxopen.cam.InspectionOperationTransformBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setAngleValue(double) - Method in interface nxopen.cam.OperationTransformBuilder

License requirements: cam_base ("CAM BASE")
.

setAngleValue(double) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder

License requirements: drafting ("DRAFTING")
.

setAngleValue(double) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setAngleValueOptimal(double) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setAngular(double) - Method in interface nxopen.cam.StepoverBuilder

License requirements: cam_base ("CAM BASE")
.

setAngular(double) - Method in interface nxopen.ListCreator

License requirements: None.

setAngularAxis(Axis) - Method in interface nxopen.geometricutilities.ModlMotion

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setAngularDelta(String) - Method in interface nxopen.geometricutilities.PatternClocking

Deprecated.

Deprecated in NX8.0.0. This functionality is no longer supported.

setAngularDimensionFormat(AngularDimensionFormat) - Method in interface nxopen.annotations.UnitsFormatPreferences

Sets the angular dimension format
License requirements: None.

setAngularDimensionValuePrecision(int) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setAngularDirection(Vector3d) - Method in interface nxopen.geometricutilities.ModlDistanceAngle

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setAngularPath(PositionControlBuilder.AngularPathOptions) - Method in interface nxopen.mechatronics.PositionControlBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setAngularPlaces(int) - Method in interface nxopen.cam.InspectionCmmCommandBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setAngularSuppressZeros(AngularSuppressZeros) - Method in interface nxopen.annotations.UnitsStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setAngularTolerance(AngularTolerance) - Method in interface nxopen.annotations.DimensionData

Sets the angular tolerances
License requirements: None.

setAngularTolerance(double) - Method in interface nxopen.blockstyler.SectionBuilder

License requirements: None.

setAngularTolerance(double) - Method in interface nxopen.blockstyler.SuperSection

License requirements: None.

setAngularTolerance(STLImportBuilder.AngularToleranceTypes) - Method in interface nxopen.facet.STLImportBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setAngularTolerance(double) - Method in interface nxopen.features.AOCSBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.

setAngularTolerance(double) - Method in interface nxopen.features.ExtrudeBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAngularTolerance(double) - Method in interface nxopen.features.OvercrownBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAngularTolerance(double) - Method in interface nxopen.features.shipdesign.BracketBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setAngularTolerance(double) - Method in interface nxopen.features.shipdesign.CollarPlateBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setAngularTolerance(double) - Method in interface nxopen.features.shipdesign.CopyObjectsBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setAngularTolerance(double) - Method in interface nxopen.features.shipdesign.CopyPasteNewBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setAngularTolerance(double) - Method in interface nxopen.features.shipdesign.MirrorShipStructureBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setAngularTolerance(double) - Method in interface nxopen.features.shipdesign.ProfileBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setAngularTolerance(double) - Method in interface nxopen.features.shipdesign.ProfileCutoutBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setAngularTolerance(double) - Method in interface nxopen.features.shipdesign.ProfileTransitionBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setAngularTolerance(double) - Method in interface nxopen.features.shipdesign.SplitStandardPartBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setAngularTolerance(double) - Method in interface nxopen.features.shipdesign.StiffenerBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setAngularTolerance(double) - Method in interface nxopen.features.VarsweepBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAngularTolerance(double) - Method in interface nxopen.preferences.SessionNXGateway

Sets the angular tolerance.

setAngularTolerance(double) - Method in interface nxopen.SketchEvaluator

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAngularTolerance(STLImporter.AngularToleranceType) - Method in interface nxopen.STLImporter

Sets the angular tolerance.

setAngularTolerance(VRMLImporter.AngularToleranceType) - Method in interface nxopen.VRMLImporter

Sets the angular tolerance.

setAngularToleranceFormat(AngularDimensionFormat) - Method in interface nxopen.annotations.UnitsFormatPreferences

Sets the angular tolerance format
License requirements: None.

setAngularTolerances(AngularTolerance) - Method in interface nxopen.preferences.AnnotationPreferences

Sets the global angular tolerances for the part
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setAngularToleranceValuePrecision(int) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setAngularUnits(InspectionCmmCommandBuilder.AngularUnitsOptions) - Method in interface nxopen.cam.InspectionCmmCommandBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setAngularUnits(UFMotion.AngularUnitsType) - Method in interface nxopen.uf.UFMotion

Refer to UF_MOTION_set_angular_units for documentation.

setAngularVelocityDirection(Direction) - Method in interface nxopen.mechatronics.RigidBodyBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setAnimationAccuracy(SimulationOptionsBuilder.Accuracy) - Method in interface nxopen.cam.SimulationOptionsBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setAnimationCurrentStep(int) - Method in interface nxopen.motion.LoadTransferControl

Sets current step in animation
License requirements: mechanisms ("MECHANISMS")
.

setAnimationPoints(double, Unit, double, Unit, int) - Method in interface nxopen.cae.SimBcPlotContoursBuilder

Sets animation points
License requirements: nx_masterfem ("Finite Element Modeling")
.

setAnnoLayer(int) - Method in interface nxopen.features.SectionInertiaAnalysisBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAnnotation3dData(boolean) - Method in interface nxopen.PartSaveOptions

Sets the option indicating whether to generate 3D Annotation data and store in NX part Quick Access Folder when you save the part file
License requirements: None.

setAnnotationInsideGeometry(boolean) - Method in interface nxopen.drafting.AutomationPreferencesBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setAnnotationMode(MeasureBuilder.AnnotationType) - Method in interface nxopen.MeasureBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAnnotationOrigin(Point3d) - Method in interface nxopen.annotations.Annotation

Sets the origin (location) of the annotation.

setAnnotationPlane(Xform) - Method in interface nxopen.annotations.Annotation

Sets the annotation plane.

setAnnotationPreference(BaseCustomSymbolBuilder.AnnotationPreferences) - Method in interface nxopen.annotations.BaseCustomSymbolBuilder

License requirements: drafting ("DRAFTING")
.

setAnnotations(boolean) - Method in interface nxopen.ObjectTypeSelector

License requirements: None.

setAnnotationTemplate(String) - Method in interface nxopen.uf.UFDrf

Refer to UF_DRF_set_annotation_template for documentation.

setAnnotationType(HatchBuilder.AnnotationTypes) - Method in interface nxopen.annotations.HatchBuilder

License requirements: drafting ("DRAFTING")
.

setAnnotationType(HatchFillSettingsBuilder.AnnotationTypes) - Method in interface nxopen.annotations.HatchFillSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setAnnotationType(PostAnnotationBuilder.Type) - Method in interface nxopen.cae.PostAnnotationBuilder

Set the annotation type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setAnnTolerance(double) - Method in interface nxopen.fields.FieldTable

License requirements: None.

setAOutput(boolean) - Method in interface nxopen.cam.AlongMachineAxisMoveBuilder

License requirements: None.

setAP1Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setAP1LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setAP1Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setAP1RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setAP2Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setAP2LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setAP2Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setAP2RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setAP3Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setAP3LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setAP3Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setAP3RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setApertureType(CameraBuilder.Aperture) - Method in interface nxopen.display.CameraBuilder

License requirements: None.

setApexReversed(boolean) - Method in interface nxopen.geometricutilities.FrameOnPathBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setApiExitName(String) - Method in interface nxopen.cam.WedmGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setApiExitName(String) - Method in interface nxopen.cam.WedmOperationBuilder

License requirements: cam_base ("CAM BASE")
.

setAPillarFeature(HeadImpactAPillar) - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setApiType(LaminateImportedLayupBuilder.ApiTypeEnum) - Method in interface nxopen.cae.LaminateImportedLayupBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setAppContextMode(int) - Method in interface nxopen.features.ShipCollection

Sets the ship design mode
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setAppDistChanged(boolean) - Method in interface nxopen.cam.InspectionUVGridBuilder

Flag indicating whether approach distance changed.

setAppend(boolean) - Method in interface nxopen.PrintPDFBuilder

License requirements: None.

setAppendedNxTextCharacterSpaceFactor(double) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setAppendedStandardTextCharacterSpaceFactor(double) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setAppendedText(AppendedText) - Method in interface nxopen.annotations.DimensionData

Sets the appended text
License requirements: None.

setAppendedText(AppendedText) - Method in interface nxopen.annotations.IAppendedText

Sets the appended text
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setAppendedText(Lettering) - Method in interface nxopen.annotations.LetteringPreferences

Sets the appended text
License requirements: None.

setAppendedText(Tag, int, UFDrf.AppendedText[]) - Method in interface nxopen.uf.UFDrf

Refer to UF_DRF_set_appended_text for documentation.

setAppendedText(Tag, UFGdt.TextLocation, int, String[]) - Method in interface nxopen.uf.UFGdt

Refer to UF_GDT_set_appended_text for documentation.

setAppendedTextAspectRatio(double) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setAppendedTextCharSpaceFactor(double) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setAppendedTextColor(NXColor) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setAppendedTextFont(int) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setAppendedTextItalicized(boolean) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setAppendedTextLineSpaceFactor(double) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setAppendedTextLineWidth(LineWidth) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setAppendedTextSize(double) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setAppendedTextSpaceFactor(double) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setAppendedTextSymbolAspectRatio(double) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setAppendMethod(CompanionResultBuilder.ResultAppendMethod) - Method in interface nxopen.cae.CompanionResultBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setAppendMethod(ResultsManipulationBuilder.ResultAppendMethod) - Method in interface nxopen.cae.ResultsManipulationBuilder

The append method if action is ResultsManipulationBuilder.Action.CREATE_COMPANION_RESULT
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Created in NX8.5.0

setAppendRefset(boolean) - Method in interface nxopen.JtCreator

License requirements: None.

setApplication(FileNewApplication) - Method in interface nxopen.FileNew

Deprecated.

Deprecated in NX9.0.0. Use FileNew.setApplicationName(java.lang.String) that takes a string name instead.

setApplicationBuilder(IGenericFileNewApplicationBuilder) - Method in interface nxopen.gateway.GenericFileNewBuilder

Sets IGenericFileNewApplicationBuilder
License requirements: None.

setApplicationContext(ApplicationContext) - Method in interface nxopen.features.sheetmetal.SheetmetalBaseBuilder

Set the application context.

setApplicationLogging(boolean) - Method in interface nxopen.pdm.SessionSettings

License requirements: None.

setApplicationMethod(OverstockBuilder.ApplicationType) - Method in interface nxopen.routing.OverstockBuilder

License requirements: routing_advanced ("Routing Advanced") OR routing_harness ("Routing Harness") OR routing_cabling ("Routing Cabling") OR routing_pipetube ("Routing Piping and Tubing") OR routing_hvac ("Routing HVAC") OR routing_platform ("Routing Platform") OR routing_pid ("Routing PID")
.

setApplicationName(String) - Method in interface nxopen.FileNew

License requirements: None.

setApplicationName(String) - Method in interface nxopen.mechatronics.ParameterStockBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setApplicationType(MirrorShipStructureBuilder.AppTypes) - Method in interface nxopen.features.shipdesign.MirrorShipStructureBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setApplicationType(RoutingApplicationView.AppType) - Method in interface nxopen.preferences.RoutingApplicationView

Sets the given routing application type.

setAppliedToType(BoundaryTurnMemberFineFinishCorner.AppliedTo) - Method in interface nxopen.cam.BoundaryTurnMemberFineFinishCorner

License requirements: cam_base ("CAM BASE")
.

setApplyAtBoundary(boolean) - Method in interface nxopen.cam.DmBndBuilder

License requirements: None.

setApplyAtPartSurface(boolean) - Method in interface nxopen.cam.DmBndBuilder

License requirements: None.

setApplyAtStepover(boolean) - Method in interface nxopen.cam.UpDownCutting

License requirements: cam_base ("CAM BASE")
.

setApplyColor(boolean) - Method in interface nxopen.tooling.ScrapDesignBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setApplyConstraintsToAll(boolean) - Method in interface nxopen.features.PoleSmoothingBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setApplyCornersSmoothing(boolean) - Method in interface nxopen.cam.NcmSmoothingBuilder

License requirements: cam_base ("CAM BASE")
.

setApplyCrosshatchToSectionView(boolean) - Method in interface nxopen.drawings.ViewSettingsBuilder

License requirements: convert_to_pmi (" Convert To PMI"), drafting ("DRAFTING")
.

setApplyEndCut(boolean) - Method in interface nxopen.features.shipdesign.ShipTrimBodyBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setApplyEndCut(boolean) - Method in interface nxopen.features.shipdesign.SplitProfilePlateBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setApplyEngageSettings(boolean) - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder

License requirements: cam_base ("CAM BASE")
.

setApplyFilletAt(DmBndBuilder.ApplyFilletAtTypes) - Method in interface nxopen.cam.DmBndBuilder

License requirements: None.

setApplyFlangeSetback(boolean) - Method in interface nxopen.features.shipdesign.StiffenerBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setApplyFlangeSetback(boolean) - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setApplyMarginToInnerBoundToggle(boolean) - Method in interface nxopen.geometricutilities.PatternFill

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setApplyOffset(boolean) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setApplyOn(StepoverBuilder.ApplyTypes) - Method in interface nxopen.cam.StepoverBuilder

License requirements: cam_base ("CAM BASE")
.

setApplyPmi(boolean) - Method in interface nxopen.JtCreator

License requirements: None.

setApplyRemoteConstraints(boolean) - Method in interface nxopen.SketchAutoConstrainBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setApplyRetractSettings(boolean) - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder

License requirements: cam_base ("CAM BASE")
.

setApplySafetyToDirect(boolean) - Method in interface nxopen.cam.NcmPlanarBuilder

License requirements: cam_base ("CAM BASE")
.

setApplySafetyToDirect(boolean) - Method in interface nxopen.cam.NcmTransfer

License requirements: cam_base ("CAM BASE")
.

setApplySmoothing(boolean) - Method in interface nxopen.cam.ToolAxisVariable

License requirements: cam_base ("CAM BASE")
.

setApplyTemplateToAll(boolean) - Method in interface nxopen.drafting.DrawingCreationWizardBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setApplyToAll(boolean) - Method in interface nxopen.features.VariableOffsetBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setApplyToAllFaces(boolean) - Method in interface nxopen.DisplayModification

Sets the apply to all faces flag.

setApplyToAllSections(boolean) - Method in interface nxopen.annotations.TableSectionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setApplyToComponent(boolean) - Method in interface nxopen.ObjectGeneralPropertiesBuilder

License requirements: None.

setApplyToCopyOfSheets(boolean) - Method in interface nxopen.features.TrimSheetBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setApplyToLastPass(boolean) - Method in interface nxopen.cam.MillCutParameters

License requirements: cam_base ("CAM BASE")
.

setApplyToOwningParts(boolean) - Method in interface nxopen.DisplayModification

Sets the flag to apply display changes to Owning Parts.

setApplyToWorkPart(boolean) - Method in interface nxopen.FeatureGeneralPropertiesBuilder

License requirements: None.

setApplyWebSetback(boolean) - Method in interface nxopen.features.shipdesign.StiffenerBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setApplyWebSetback(boolean) - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setApproach(NXColor) - Method in interface nxopen.cam.PathDisplayColors

License requirements: cam_base ("CAM BASE")
.

setApproachDirection(Direction) - Method in interface nxopen.cam.InspectionCurveFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setApproachDirection(double[]) - Method in interface nxopen.cam.InspectionPathBuilder

Sets the approach direction vector values
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setApproachDistance(double) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setApproachDistance(double) - Method in interface nxopen.cam.InspectionMoveBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setApproachFlag(ProbeProtectedParametersBuilder.AppMethodTypes) - Method in interface nxopen.cam.ProbeProtectedParametersBuilder

License requirements: cam_base ("CAM BASE")
.

setApproachMethod(NcmTransferBuilder.AppDepMethodTypes) - Method in interface nxopen.cam.NcmTransferBuilder

License requirements: cam_base ("CAM BASE")
.

setApproachPathMode(TurnAvoidanceApproachBuilder.ApproachPathModes) - Method in interface nxopen.cam.TurnAvoidanceApproachBuilder

License requirements: cam_base ("CAM BASE")
.

setApproachPostCommands(TaggedObject) - Method in interface nxopen.cam.NcmTransferBuilder

License requirements: cam_base ("CAM BASE")
.

setApproachToolAxis(SmartObject) - Method in interface nxopen.cam.NcmTransferBuilder

License requirements: cam_base ("CAM BASE")
.

setApproachToolAxisOption(NcmTransferBuilder.AppDepToolAxisOptions) - Method in interface nxopen.cam.NcmTransferBuilder

License requirements: cam_base ("CAM BASE")
.

setApproachVector(SmartObject) - Method in interface nxopen.cam.NcmTransferBuilder

License requirements: cam_base ("CAM BASE")
.

setApproximateOffset(boolean) - Method in interface nxopen.features.ThickenBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setApproximateSheetbodyOption(boolean) - Method in interface nxopen.tooling.DieDesDrawDieBuilder

License requirements: ug_die_design ("Die Design")
.

setApproximateSheetbodyOption(boolean) - Method in interface nxopen.tooling.DieDesDrawPunchBuilder

License requirements: ug_die_design ("Die Design")
.

setApproximation(CompensateRoughDataBuilder.ApproximationType) - Method in interface nxopen.die.CompensateRoughDataBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setApproxOption(boolean) - Method in interface nxopen.features.OffsetSurfaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setApproxSheetBody(boolean) - Method in interface nxopen.tooling.DieDesignLowerBinderBuilder

License requirements: ug_die_design ("Die Design")
.

setArbitraryNoteTitle(String[]) - Method in interface nxopen.annotations.BaseCustomSymbolBuilder

Sets the arbitrary note value.

setArc(NXObject) - Method in interface nxopen.cam.InspectionScanArcBuilder

License requirements: None.

setArcAngle(double) - Method in interface nxopen.cam.NcmPlanarEngRetBuilder

License requirements: cam_base ("CAM BASE")
.

setArcAngle(double) - Method in interface nxopen.cam.NcmScEngRetBuilder

License requirements: cam_base ("CAM BASE")
.

setArcAngle(double) - Method in interface nxopen.cam.ToolPathEditorBuilder

License requirements: None.

setArcAxis(Direction) - Method in interface nxopen.cam.CircularAboutAxisMoveBuilder

License requirements: None.

setArcAxis(Vector3d) - Method in interface nxopen.cam.PathCircularMotion

License requirements: cam_base ("CAM BASE")
.

setArcAxisType(CircularAboutAxisMoveBuilder.AxisType) - Method in interface nxopen.cam.CircularAboutAxisMoveBuilder

License requirements: None.

setArcCenter(Point3d) - Method in interface nxopen.cam.PathCircularMotion

License requirements: cam_base ("CAM BASE")
.

setArcExtendMethod(CircularAboutAxisMoveBuilder.ExtensionType) - Method in interface nxopen.cam.CircularAboutAxisMoveBuilder

License requirements: None.

setArchiveControllerType(int) - Method in interface nxopen.sim.MachineToolConfiguration

Sets the archive controller type
License requirements: None.

setArchiveControllerVersion(String) - Method in interface nxopen.sim.MachineToolConfiguration

Sets the archive controller version
License requirements: None.

setArchiving(UFPatt.Switch) - Method in interface nxopen.uf.UFPatt

Refer to UF_PATT_set_archiving for documentation.

setArchPartPath(String) - Method in interface nxopen.linedesigner.CreateSystemBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setArcLength(String) - Method in interface nxopen.DatumConstraint

License requirements: solid_modeling ("SOLIDS MODELING")
.

setArcLength(double) - Method in interface nxopen.features.DivideCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setArcLengthType(DatumConstraint.CurveOption) - Method in interface nxopen.DatumConstraint

Sets
License requirements: solid_modeling ("SOLIDS MODELING")
.

setArcOpensDown(boolean) - Method in interface nxopen.routing.GapArcSegment

License requirements: routing_base ("Routing Basic")
.

setArcRadius(double) - Method in interface nxopen.cam.PathCircularMotion

License requirements: cam_base ("CAM BASE")
.

setArcRadius(double) - Method in interface nxopen.cam.ToolPathEditorBuilder

License requirements: None.

setArcSegmentsType(SpineCurveBuilder.ArcSegmentsTypes) - Method in interface nxopen.features.SpineCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setArcVector(NXObject) - Method in interface nxopen.cam.ProbeCalibrateStylusMoveBuilder

License requirements: None.

setArcVector(NXObject) - Method in interface nxopen.cam.ProbeInspectBorebossMoveBuilder

License requirements: None.

setAreaControl(int) - Method in interface nxopen.features.FillHoleBuilder

License requirements: nx_freeform_1 ("basic freeform modeling"), solid_modeling ("SOLIDS MODELING")
.

setAreafillAngle(double) - Method in interface nxopen.annotations.HatchBuilder

Deprecated.

Deprecated in NX7.5.0. Use HatchFillSettingsBuilder instead.

setAreafillAngle(double) - Method in interface nxopen.annotations.HatchFillSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setAreaFillAngle(double) - Method in interface nxopen.annotations.HatchStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setAreafillAngle(Tag, double) - Method in interface nxopen.uf.UFDrf

Refer to UF_DRF_set_areafill_angle for documentation.

setAreaFillMaterial(AreaFillMaterial) - Method in interface nxopen.annotations.HatchStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setAreafillMaterial(Tag, UFDrf.ValidMaterial) - Method in interface nxopen.uf.UFDrf

Refer to UF_DRF_set_areafill_material for documentation.

setAreaFillScale(double) - Method in interface nxopen.annotations.HatchStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setAreafillScale(Tag, double) - Method in interface nxopen.uf.UFDrf

Refer to UF_DRF_set_areafill_scale for documentation.

setAreAllOccurrencesIncluded(boolean) - Method in interface nxopen.annotations.QueryPmiBuilder

Sets an all occurrences of selected component to be included toggle
License requirements: None.

setAreaMillingCutDirection(AreaMillingContainment.CutDirectionTypes) - Method in interface nxopen.cam.AreaMillingSteepContainment

License requirements: cam_base ("CAM BASE")
.

setAreas(double[]) - Method in interface nxopen.userdefinedobjects.UserDefinedObject

Sets all of the areas stored with this UDO
License requirements: None.

setAreas(int, int, double[]) - Method in interface nxopen.userdefinedobjects.UserDefinedObject

Replaces the areas stored with this UDO in the specified range with a new array of areas
License requirements: None.

setAreaSize(String) - Method in interface nxopen.annotations.DatumTargetBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setAreaSymbol(FeatureControlFrameDataBuilder.AreaSymbolType) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setAreAttachedPmiIncluded(boolean) - Method in interface nxopen.annotations.QueryPmiBuilder

Sets an attached pmi to selected geometry to be included toggle
License requirements: None.

setAreBordersEnabled(boolean) - Method in interface nxopen.facet.FeatureExtractionBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setAreReferencingMemberObjectsIncluded(boolean) - Method in interface nxopen.annotations.QueryPmiBuilder

Sets a referencing member objects of selected geometry to be included toggle
License requirements: None.

setAreRegionsEnabled(boolean) - Method in interface nxopen.facet.FeatureExtractionBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setAroundEdgeDiaOption(CircularImprintBuilder.AroundEdgeDiaType) - Method in interface nxopen.cae.CircularImprintBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setArrangementName(String) - Method in interface nxopen.drawings.ViewStyleBaseBuilder

License requirements: drafting ("DRAFTING")
.

setArrangements(AssembliesParameterPropertiesBuilder.ArrangementOptions) - Method in interface nxopen.assemblies.AssembliesParameterPropertiesBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setArrangementSpecific(boolean) - Method in interface nxopen.positioning.ComponentConstraint

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setArray(Annotation[]) - Method in interface nxopen.annotations.SelectAnnotationList

Sets the list of objects in the selection list.

setArray(BaseCustomSymbol[]) - Method in interface nxopen.annotations.SelectBaseCustomSymbolList

Sets the list of objects in the selection list.

setArray(OrdinateDimension[]) - Method in interface nxopen.annotations.SelectOrdinateDimensionList

Sets the list of objects in the selection list.

setArray(TableSection[]) - Method in interface nxopen.annotations.SelectTableSectionList

Sets the list of objects in the selection list.

setArray(Component[]) - Method in interface nxopen.assemblies.SelectComponentList

Sets the list of objects in the selection list.

setArray(boolean) - Method in interface nxopen.AttributePropertiesBaseBuilder

License requirements: None.

setArray(CAEBody[]) - Method in interface nxopen.cae.SelectCAEBodyList

Sets the list of objects in the selection list.

setArray(CAEEdge[]) - Method in interface nxopen.cae.SelectCAEEdgeList

Sets the list of objects in the selection list.

setArray(CAEFace[]) - Method in interface nxopen.cae.SelectCAEFaceList

Sets the list of objects in the selection list.

setArray(FEElemFace[]) - Method in interface nxopen.cae.SelectFEElemFaceList

Sets the list of objects in the selection list.

setArray(FENode[]) - Method in interface nxopen.cae.SelectFENodeList

Sets the list of objects in the selection list.

setArray(Mesh[]) - Method in interface nxopen.cae.SelectMeshList

Sets the list of objects in the selection list.

setArray(CAMFeature[]) - Method in interface nxopen.cam.SelectCAMFeatureList

Sets the list of objects in the selection list.

setArray(DraftingView[]) - Method in interface nxopen.drawings.SelectDraftingViewList

Sets the list of objects in the selection list.

setArray(DrawingView[]) - Method in interface nxopen.drawings.SelectDrawingViewList

Sets the list of objects in the selection list.

setArray(FacetedBody[]) - Method in interface nxopen.facet.SelectFacetedBodyList

Sets the list of objects in the selection list.

setArray(DatumCsys[]) - Method in interface nxopen.features.SelectDatumCsysList

Sets the list of objects in the selection list.

setArray(Feature[]) - Method in interface nxopen.features.SelectFeatureList

Sets the list of objects in the selection list.

setArray(SubdivisionBody[]) - Method in interface nxopen.features.subdivision.SelectSubdivisionBodyList

Sets the list of objects in the selection list.

setArray(Component[]) - Method in interface nxopen.layout2d.SelectComponentList

Sets the list of objects in the selection list.

setArray(CollisionSensor[]) - Method in interface nxopen.mechatronics.SelectCollisionSensorList

Sets the list of objects in the selection list.

setArray(HydraulicCylinder[]) - Method in interface nxopen.mechatronics.SelectHydraulicCylinderList

Sets the list of objects in the selection list.

setArray(LogicObject[]) - Method in interface nxopen.mechatronics.SelectLogicObjectList

Sets the list of objects in the selection list.

setArray(PneumaticCylinder[]) - Method in interface nxopen.mechatronics.SelectPneumaticCylinderList

Sets the list of objects in the selection list.

setArray(Body[]) - Method in interface nxopen.SelectBodyList

Sets the list of objects in the selection list.

setArray(CoordinateSystem[]) - Method in interface nxopen.SelectCoordinateSystemList

Sets the list of objects in the selection list.

setArray(Curve[]) - Method in interface nxopen.SelectCurveList

Sets the list of objects in the selection list.

setArray(DatumPlane[]) - Method in interface nxopen.SelectDatumPlaneList

Sets the list of objects in the selection list.

setArray(DisplayableObject[]) - Method in interface nxopen.SelectDisplayableObjectList

Sets the list of objects in the selection list.

setArray(Edge[]) - Method in interface nxopen.SelectEdgeList

Sets the list of objects in the selection list.

setArray(Expression[]) - Method in interface nxopen.SelectExpressionList

Sets the list of objects in the selection list.

setArray(Face[]) - Method in interface nxopen.SelectFaceList

Sets the list of objects in the selection list.

setArray(IBaseCurve[]) - Method in interface nxopen.SelectIBaseCurveList

Sets the list of objects in the selection list.

setArray(IBasePlane[]) - Method in interface nxopen.SelectIBasePlaneList

Sets the list of objects in the selection list.

setArray(ICurve[]) - Method in interface nxopen.SelectICurveList

Sets the list of objects in the selection list.

setArray(INXObject[]) - Method in interface nxopen.SelectINXObjectList

Sets the list of objects in the selection list.

setArray(IParameterizedSurface[]) - Method in interface nxopen.SelectIParameterizedSurfaceList

Sets the list of objects in the selection list.

setArray(NXObject[]) - Method in interface nxopen.SelectNXObjectList

Sets the list of objects in the selection list.

setArray(TaggedObject[]) - Method in interface nxopen.SelectObjectList

Sets the list of objects in the selection list.

setArray(Part[]) - Method in interface nxopen.SelectPartList

Sets the list of objects in the selection list.

setArray(Point[]) - Method in interface nxopen.SelectPointList

Sets the list of objects in the selection list.

setArray(Spline[]) - Method in interface nxopen.SelectSplineList

Sets the list of objects in the selection list.

setArray(TaggedObject[]) - Method in interface nxopen.SelectTaggedObjectList

Sets the list of objects in the selection list.

setArrayAngle(double) - Method in interface nxopen.cam.InspectionOperationTransformBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setArrayAngle(double) - Method in interface nxopen.cam.OperationTransformBuilder

License requirements: cam_base ("CAM BASE")
.

setArrayCircularIncrementAngle(double) - Method in interface nxopen.cam.InspectionOperationTransformBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setArrayCircularIncrementAngle(double) - Method in interface nxopen.cam.OperationTransformBuilder

License requirements: cam_base ("CAM BASE")
.

setArrayCircularNumber(int) - Method in interface nxopen.cam.InspectionOperationTransformBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setArrayCircularNumber(int) - Method in interface nxopen.cam.OperationTransformBuilder

License requirements: cam_base ("CAM BASE")
.

setArrayCircularRadius(double) - Method in interface nxopen.cam.InspectionOperationTransformBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setArrayCircularRadius(double) - Method in interface nxopen.cam.OperationTransformBuilder

License requirements: cam_base ("CAM BASE")
.

setArrayCircularStartAngle(double) - Method in interface nxopen.cam.InspectionOperationTransformBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setArrayCircularStartAngle(double) - Method in interface nxopen.cam.OperationTransformBuilder

License requirements: cam_base ("CAM BASE")
.

setArrayIndex(int) - Method in interface nxopen.AttributePropertiesBaseBuilder

License requirements: None.

setArrayNumberAlongXc(int) - Method in interface nxopen.cam.InspectionOperationTransformBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setArrayNumberAlongXc(int) - Method in interface nxopen.cam.OperationTransformBuilder

License requirements: cam_base ("CAM BASE")
.

setArrayNumberAlongYc(int) - Method in interface nxopen.cam.InspectionOperationTransformBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setArrayNumberAlongYc(int) - Method in interface nxopen.cam.OperationTransformBuilder

License requirements: cam_base ("CAM BASE")
.

setArrayOffsetXc(double) - Method in interface nxopen.cam.InspectionOperationTransformBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setArrayOffsetXc(double) - Method in interface nxopen.cam.OperationTransformBuilder

License requirements: cam_base ("CAM BASE")
.

setArrayOffsetYc(double) - Method in interface nxopen.cam.InspectionOperationTransformBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setArrayOffsetYc(double) - Method in interface nxopen.cam.OperationTransformBuilder

License requirements: cam_base ("CAM BASE")
.

setArrayOriginPoint(Point) - Method in interface nxopen.cam.InspectionOperationTransformBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setArrayOriginPoint(Point) - Method in interface nxopen.cam.OperationTransformBuilder

License requirements: cam_base ("CAM BASE")
.

setArrowAngle(double) - Method in interface nxopen.drawings.SheetBorderSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setArrowDirection(CuttingPlaneSymbolBuilder.ArrowDirectionOption) - Method in interface nxopen.annotations.CuttingPlaneSymbolBuilder

License requirements: geometric_tol ("GDT")
.

setArrowDirection(Direction) - Method in interface nxopen.drawings.SectionLineBuilder

Deprecated.

Deprecated in NX10.0.0. This API is not supported yet and should not be used.

setArrowDirection(ArrowDirectionType) - Method in interface nxopen.drawings.SheetBorderSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setArrowDisplay(ArrowDisplay) - Method in interface nxopen.annotations.DimensionPreferences

Sets the arrow display
License requirements: None.

setArrowDisplayFlag(boolean) - Method in interface nxopen.cam.DisplayPaint

License requirements: cam_base ("CAM BASE")
.

setArrowDisplayFlag(boolean) - Method in interface nxopen.cam.OperationDisplayOptionsBuilder

License requirements: cam_base ("CAM BASE")
.

setArrowhead(LeaderData.ArrowheadType) - Method in interface nxopen.annotations.LeaderData

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setArrowheadAngle(double) - Method in interface nxopen.drawings.SectionLineStyleBuilder

Deprecated.

Deprecated in NX10.0.0. Use ViewSectionLineBuilder.setArrowheadAngle(double) instead.

setArrowHeadAngle(double) - Method in interface nxopen.drawings.ViewProjectedArrowSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setArrowheadAngle(double) - Method in interface nxopen.drawings.ViewSectionLineBuilder

License requirements: drafting ("DRAFTING")
.

setArrowheadIncludedAngle(double) - Method in interface nxopen.annotations.LineAndArrowPreferences

Sets the arrowhead included angle
License requirements: None.

setArrowheadIncludedAngle(double) - Method in interface nxopen.annotations.LineArrowStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setArrowheadLength(double) - Method in interface nxopen.annotations.LineAndArrowPreferences

Sets the arrowhead length
License requirements: None.

setArrowheadLength(double) - Method in interface nxopen.annotations.LineArrowStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setArrowheadLength(double) - Method in interface nxopen.drawings.SectionLineStyleBuilder

Deprecated.

Deprecated in NX10.0.0. Use ViewSectionLineBuilder.setArrowheadLength(double) instead.

setArrowHeadLength(double) - Method in interface nxopen.drawings.ViewProjectedArrowSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setArrowheadLength(double) - Method in interface nxopen.drawings.ViewSectionLineBuilder

License requirements: drafting ("DRAFTING")
.

setArrowheadStyle(SectionLineStyleBuilder.ArrowheadStyleType) - Method in interface nxopen.drawings.SectionLineStyleBuilder

Deprecated.

Deprecated in NX10.0.0. Use ViewSectionLineBuilder.setStyle(nxopen.drawings.ViewSectionLineBuilder.StyleType) instead.

setArrowHeadStyle(ViewProjectedArrowSettingsBuilder.DimensionsStyleType) - Method in interface nxopen.drawings.ViewProjectedArrowSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setArrowHeadTail(double) - Method in interface nxopen.drawings.SheetBorderSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setArrowLength(double) - Method in interface nxopen.annotations.CuttingPlaneSymbolBuilder

License requirements: geometric_tol ("GDT")
.

setArrowLength(double) - Method in interface nxopen.drawings.SectionLineStyleBuilder

Deprecated.

Deprecated in NX10.0.0. Use ViewSectionLineBuilder.setArrowLength(double) instead.

setArrowLength(double) - Method in interface nxopen.drawings.SheetBorderSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setArrowLength(double) - Method in interface nxopen.drawings.ViewSectionLineBuilder

License requirements: drafting ("DRAFTING")
.

setArrowLineDistanceToGeometry(double) - Method in interface nxopen.drawings.ViewProjectedArrowSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setArrowLineLength(double) - Method in interface nxopen.drawings.ViewProjectedArrowSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setArrowSideData(LineWeldSideData) - Method in interface nxopen.annotations.LineWeldData

Sets the arrow side data
License requirements: None.

setArrowSideOption(TrimAndExtendBuilder.ArrowSideType) - Method in interface nxopen.features.TrimAndExtendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setArrowSideOption(TrimExtendBuilder.ArrowSideOptions) - Method in interface nxopen.features.TrimExtendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setArrowStyle(ArrowStyleType) - Method in interface nxopen.drawings.SheetBorderSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setArticulationStopTolerance(double) - Method in interface nxopen.uf.UFMotion

Refer to UF_MOTION_set_articulation_stop_tolerance for documentation.

setAskEditControlHandler(Tree.AskEditControlCallback) - Method in interface nxopen.blockstyler.Tree

Sets the node-edit-control callback
License requirements: None.

setAsMyDefaultTask() - Method in interface nxopen.tooling.ConcurrentDesignManagementBuilder

Returns the option to set as the current user's default task.

setAsOriginalOption(boolean) - Method in interface nxopen.features.FreeTransformerBuilder

License requirements: None.

setAsOriginalOption(boolean) - Method in interface nxopen.features.MeshTransformerBuilder

License requirements: None.

setAsPatchSurface(boolean) - Method in interface nxopen.tooling.EnlargeSurfaceBuilder

License requirements: None.

setAsPatchSurface(boolean) - Method in interface nxopen.tooling.TrimRegionBuilder

License requirements: None.

setAspect(String) - Method in interface nxopen.mechatronics.LogicObjectBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setAspectRatio(double) - Method in interface nxopen.display.DecalBuilder

License requirements: None.

setAspectRatio(double) - Method in interface nxopen.display.IrayPlusSimpleMaterialEditorBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setAspectRatioOption(DxfdwgImporter.AspectRatioOptions) - Method in interface nxopen.DxfdwgImporter

License requirements: None.

setAsRequiredQuantity(Component) - Method in interface nxopen.assemblies.ComponentAssembly

Sets the as-required quantity on this component.

setAssemblyArrangement(String) - Method in interface nxopen.drawings.BaseViewStyle

Sets the configuration for the arrangement in assembly after an arrangement part file is loaded.

setAssemblyConstraintsDelay(boolean) - Method in interface nxopen.Update

License requirements: None.

setAssemblyCrosshatching(boolean) - Method in interface nxopen.annotations.LightweightSectionBuilder

License requirements: geometric_tol ("GDT")
.

setAssemblyCrosshatching(boolean) - Method in interface nxopen.annotations.PmiPreferences

License requirements: None.

setAssemblyCrossHatching(boolean) - Method in interface nxopen.drawings.SectionViewStyle

Sets the status of assembly cross hatching.

setAssemblyCrossHatching(boolean) - Method in interface nxopen.preferences.SectionViewPreferences

Sets the status of assembly cross hatching.

setAssemblyExtentLength(int, double) - Method in interface nxopen.tooling.FastenerAssy

Sets the extent length for the fastener assembly data
License requirements: None.

setAssemblyOptions(UpdateShipLibraryBuilder.ShipLibAssemblyOption) - Method in interface nxopen.features.shipdesign.UpdateShipLibraryBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setAssemblyPart(String) - Method in interface nxopen.features.shipdesign.ShipSectionBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_detail ("Ship Detail Design")
.

setAssemblyPart(String) - Method in interface nxopen.features.shipdesign.SteelDistributionBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setAssemblyPart(Part) - Method in interface nxopen.layout2d.AssemblyFromLayout2dBuilder

License requirements: None.

setAssemblyTolerance(boolean) - Method in interface nxopen.drawings.ViewStyleSectionBuilder

License requirements: drafting ("DRAFTING")
.

setAssemOptions(UFAssem.Options) - Method in interface nxopen.uf.UFAssem

Refer to UF_ASSEM_set_assem_options for documentation.

setAssignColor(boolean) - Method in interface nxopen.cam.FeatureRecognitionBuilder

License requirements: None.

setAssignColor(NXColor) - Method in interface nxopen.tooling.ScrapDesignBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAssignDefaultCorner(boolean) - Method in interface nxopen.routing.LinearPathSettings

License requirements: routing_base ("Routing Basic")
.

setAssignDefaultElbow(boolean) - Method in interface nxopen.routing.LinearPathSettings

License requirements: routing_base ("Routing Basic")
.

setAssignedAxes(String[]) - Method in interface nxopen.sim.KinematicChannelBuilder

Sets a list of assigned axes of the channel
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setAssignedAxis(String) - Method in interface nxopen.sim.KinematicChannelBuilder

Sets an assigned axis of the channel
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setAssignedFormula(AdapterFormula) - Method in interface nxopen.mechatronics.AdapterSignalBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setAssignedUser(String) - Method in interface nxopen.issue.IssueContent

License requirements: nx_issue_mgmt ("NX Issue Tracking")
.

setAssignedUser(String) - Method in interface nxopen.issue.IssueContentBuilder

License requirements: nx_issue_mgmt ("NX Issue Tracking")
.

setAssignPartNumber(String) - Method in interface nxopen.pdm.PartBuilder

Sets the part number explicitly into builder.

setAssignPartType(String) - Method in interface nxopen.pdm.PartBuilder

Sets the part type explicitly into builder.

setAssignStockMethod(PathStockPreferenceBuilder.AssignMethod) - Method in interface nxopen.mechanicalrouting.PathStockPreferenceBuilder

Sets the method to determine which stock to assign.

setAssignStockMethod(PathStockBuilder.AssignMethod) - Method in interface nxopen.routing.PathStockBuilder

Sets the method to determine which stock to assign.

setAssignWeldPMI(boolean) - Method in interface nxopen.weld.FilletBuilder

License requirements: ugweld ("UG WELD")
.

setAssignWeldPMI(boolean) - Method in interface nxopen.weld.PlugSlotBuilder

License requirements: None.

setAssignWeldPMI(boolean) - Method in interface nxopen.weld.UserDefinedWeldBuilder

License requirements: ugweld ("UG WELD")
.

setAssignWeldPMI(boolean) - Method in interface nxopen.weld.WeldGrooveBuilder

License requirements: ugweld ("UG WELD")
.

setAssocDoubleArray(UFVariant, String, String, double) - Method in interface nxopen.uf.UFMom

Refer to UF_MOM_set_assoc_double_array for documentation.

setAssocFileCopy(String, boolean) - Method in interface nxopen.uf.UFClone

Refer to UF_CLONE_set_assoc_file_copy for documentation.

setAssocFileDir(String, String) - Method in interface nxopen.uf.UFClone

Refer to UF_CLONE_set_assoc_file_dir for documentation.

setAssocFileRootDir(String) - Method in interface nxopen.uf.UFClone

Refer to UF_CLONE_set_assoc_file_root_dir for documentation.

setAssocHighlightColor(int) - Method in interface nxopen.preferences.SessionPmi

Sets the associated highlight color
License requirements: None.

setAssociatedCadAsWork(Part) - Method in interface nxopen.cae.FemPart

Sets the cad part associated with the fem as work.

setAssociatedCurve(NXObject) - Method in interface nxopen.mechatronics.PathConstraintFrameBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setAssociatedFilesRootDirectory(String) - Method in interface nxopen.pdm.PartOperationImportBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setAssociatedObject(AssociatedObject) - Method in interface nxopen.annotations.IPmi

Sets the associated object.

setAssociatedObject(AssociatedObject) - Method in interface nxopen.annotations.PmiData

Sets the associated object
License requirements: None.

setAssociatedObjects(NXObject[]) - Method in interface nxopen.drawings.SelectRegionBuilder

Set the associated object
License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setAssociatedObjects(DisplayableObject[]) - Method in interface nxopen.markup.MarkupObject

Sets the associated objects
License requirements: None.

setAssociatedObjects(NXObject[]) - Method in interface nxopen.Validation

Specifies or removes associated objects for the check.

setAssociatedPortName(String) - Method in interface nxopen.motion.OutputPortAssociation

License requirements: mechanisms ("MECHANISMS")
.

setAssociatedPortName(String) - Method in interface nxopen.motion.PortVariable

License requirements: mechanisms ("MECHANISMS")
.

setAssociateToSketch(boolean) - Method in interface nxopen.drawings.SketchSectionLineBuilder

License requirements: drafting ("DRAFTING")
.

setAssociationSetting(boolean) - Method in interface nxopen.tooling.PocketBuilder

License requirements: None.

setAssociationTool(PiercingInsertBuilder.AssociationToolType) - Method in interface nxopen.tooling.PiercingInsertBuilder

License requirements: None.

setAssociationTool(PiercingInsertMiniToolsBuilder.AssociationToolItems) - Method in interface nxopen.tooling.PiercingInsertMiniToolsBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setAssociative(boolean) - Method in interface nxopen.assemblies.ComponentPatternBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setAssociative(boolean) - Method in interface nxopen.die.AddSurfBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setAssociative(boolean) - Method in interface nxopen.die.TrimLineDevelopmentBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setAssociative(boolean) - Method in interface nxopen.display.BoundedGridBuilder

License requirements: None.

setAssociative(boolean) - Method in interface nxopen.drawings.DetailViewBuilder

License requirements: None.

setAssociative(boolean) - Method in interface nxopen.drawings.HingeLineBuilder

License requirements: None.

setAssociative(boolean) - Method in interface nxopen.drawings.ViewPlacementBuilder

License requirements: drafting ("DRAFTING")
.

setAssociative(boolean) - Method in interface nxopen.features.AssociativeArcBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setAssociative(boolean) - Method in interface nxopen.features.AssociativeLineBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setAssociative(boolean) - Method in interface nxopen.features.BridgeCurveBuilder

Deprecated.

Deprecated in NX8.5.0. Use BridgeCurveBuilderEx instead.

setAssociative(boolean) - Method in interface nxopen.features.BridgeCurveBuilderEx

License requirements: features_modeling ("FEATURES MODELING")
.

setAssociative(boolean) - Method in interface nxopen.features.CircularBlendCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAssociative(boolean) - Method in interface nxopen.features.CompositeCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setAssociative(boolean) - Method in interface nxopen.features.CopyPasteBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAssociative(boolean) - Method in interface nxopen.features.DatumAxisBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setAssociative(boolean) - Method in interface nxopen.features.ExtractFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setAssociative(boolean) - Method in interface nxopen.features.FitCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAssociative(boolean) - Method in interface nxopen.features.GeomcopyBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAssociative(boolean) - Method in interface nxopen.features.IntersectionCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAssociative(boolean) - Method in interface nxopen.features.IsoclineCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setAssociative(boolean) - Method in interface nxopen.features.IsoparametricCurvesBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAssociative(boolean) - Method in interface nxopen.features.MakeSolidBuilder

License requirements: None.

setAssociative(boolean) - Method in interface nxopen.features.MirrorBodyBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setAssociative(boolean) - Method in interface nxopen.features.MoveObjectBuilder

License requirements: None.

setAssociative(boolean) - Method in interface nxopen.features.Offset3DCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAssociative(boolean) - Method in interface nxopen.features.PatternGeometryBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAssociative(boolean) - Method in interface nxopen.features.PointSetBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAssociative(boolean) - Method in interface nxopen.features.PromotionBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAssociative(boolean) - Method in interface nxopen.features.SectionCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAssociative(boolean) - Method in interface nxopen.features.shipdesign.ShellExpansionBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setAssociative(boolean) - Method in interface nxopen.features.shipdesign.TraceLinesBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setAssociative(boolean) - Method in interface nxopen.features.SpineCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAssociative(boolean) - Method in interface nxopen.features.StudioSplineBuilder

Deprecated.

Deprecated in NX8.0.0. Use StudioSplineBuilderEx instead.

setAssociative(boolean) - Method in interface nxopen.features.StudioSplineBuilderEx

License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setAssociative(boolean) - Method in interface nxopen.features.TextBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAssociative(boolean) - Method in interface nxopen.features.UntrimBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAssociative(boolean) - Method in interface nxopen.features.VirtualCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAssociative(boolean) - Method in interface nxopen.features.WaveDatumBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setAssociative(boolean) - Method in interface nxopen.features.WaveInterfaceLinkerBuilder

License requirements: None.

setAssociative(boolean) - Method in interface nxopen.features.WaveLinkBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAssociative(boolean) - Method in interface nxopen.features.WavePointBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setAssociative(boolean) - Method in interface nxopen.features.WaveRoutingBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAssociative(boolean) - Method in interface nxopen.features.WaveSketchBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAssociative(boolean) - Method in interface nxopen.features.WrapBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAssociative(boolean) - Method in interface nxopen.features.WrapGeometryBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAssociative(boolean) - Method in interface nxopen.geometricutilities.CurveOptions

Sets the associativity option
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setAssociative(boolean) - Method in interface nxopen.sim.SinumerikCaSimplifyBodiesBuilder

License requirements: nx_isv_mtb ("Machine Tool Builder") OR nx_sinumerik_ca ("Sinumerik Collision Avoidance")
.

setAssociative(boolean) - Method in interface nxopen.tooling.ReusableObjectPasteBuilder

License requirements: None.

setAssociative(boolean) - Method in interface nxopen.tooling.StockSizeBuilder

License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setAssociative(boolean) - Method in interface nxopen.weld.FilletBuilder

License requirements: ugweld ("UG WELD")
.

setAssociativeAlignment(boolean) - Method in interface nxopen.drawings.MultipleViewPlacementBuilder

License requirements: drafting ("DRAFTING")
.

setAssociativeAlignment(boolean) - Method in interface nxopen.drawings.ViewCreationWizardBuilder

License requirements: drafting ("DRAFTING")
.

setAssociativeAlignment(boolean) - Method in interface nxopen.drawings.ViewWorkflowBuilder

License requirements: drafting ("DRAFTING")
.

setAssociativeAlignment(boolean) - Method in interface nxopen.preferences.PartDrafting

Sets the flag indicating whether to associatively align the view when placing it
License requirements: None.

setAssociativeEditFreeForm(boolean) - Method in interface nxopen.preferences.SessionModeling

Sets the associative edit free form option.

setAssociativeObjects(DisplayableObject[]) - Method in interface nxopen.die.FlangeTaskBuilder

Sets the associative objects of the flange task
License requirements: die_engineering ("DIE ENGINEERING")
.

setAssociativeObjects(DisplayableObject[]) - Method in interface nxopen.die.PierceTaskBuilder

Sets the associative objects of the pierce task
License requirements: die_engineering ("DIE ENGINEERING")
.

setAssociativeObjects(DisplayableObject[]) - Method in interface nxopen.die.TrimTaskBuilder

Sets the associative objects of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.

setAssociativeOrientation(boolean) - Method in interface nxopen.drawings.OvtBuilder

License requirements: drafting ("DRAFTING")
.

setAssociativeOrigin(Annotation.AssociativeOriginData, Point3d) - Method in interface nxopen.annotations.Annotation

Associates the annotation's origin to the specified geometry.

setAssociativeOrigin(Annotation.AssociativeOriginData) - Method in interface nxopen.annotations.OriginBuilder

Associates the annotation's origin to the specified objects
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING")
.

setAssociativeOrigin(Tag, UFDrf.AssociativeOrigin, double[]) - Method in interface nxopen.uf.UFDrf

Refer to UF_DRF_set_associative_origin for documentation.

setAssociativeOutputOption(boolean) - Method in interface nxopen.features.AOCSBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.

setAssociativePlane(Plane) - Method in interface nxopen.display.DynamicSectionBuilder

Makes dynamic section associative to the specified plane The plane must be a smart plane; otherwise an error will be reported.

setAssociativePosition(boolean) - Method in interface nxopen.tooling.StandardPartBuilder

License requirements: None.

setAssociativePosition(boolean) - Method in interface nxopen.tooling.StandardPartPositionBuilder

License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setAssociativeSplit(boolean) - Method in interface nxopen.weld.WeldJointBuilder

License requirements: structure_weld ("STRUCTURE WELD")
.

setAssociativeToggle(boolean) - Method in interface nxopen.features.GeneralConicBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setAssociativity(int, Associativity) - Method in interface nxopen.annotations.Annotation

Sets the associativity at specified index.The index starts from 1, and is less than or equal to the return value from Annotation.numberOfAssociativities() .

setAssociativity(int, Associativity[]) - Method in interface nxopen.annotations.DimensionData

Sets the associativity at specified index.

setAssociativity(boolean) - Method in interface nxopen.SketchProjectBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setAssociativity(boolean) - Method in interface nxopen.weld.JointmarkBuilder

License requirements: ugweld ("UG WELD")
.

setAssociativityData(Tag, int, UFDrf.ObjectAssocData[]) - Method in interface nxopen.uf.UFDrf

Refer to UF_DRF_set_associativity_data for documentation.

setAssociativityEnumType(MapleBuilder.AssociativityEnum) - Method in interface nxopen.features.MapleBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAssociativityForLightweightSectionViews(boolean) - Method in interface nxopen.annotations.PmiPreferences

License requirements: None.

setAssociativityToggle(boolean) - Method in interface nxopen.features.MapleBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAssocIntArray(UFVariant, String, String, int) - Method in interface nxopen.uf.UFMom

Refer to UF_MOM_set_assoc_int_array for documentation.

setAssocStringArray(UFVariant, String, String, String) - Method in interface nxopen.uf.UFMom

Refer to UF_MOM_set_assoc_string_array for documentation.

setAssoToggle(boolean) - Method in interface nxopen.features.vehicledesign.HoodVisibilityBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setAssoToggle(boolean) - Method in interface nxopen.features.vehicledesign.VisionPlaneBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setAssoToggle(boolean) - Method in interface nxopen.features.vehicledesign.WindshieldDatumBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setAtl(SeatBeltAnchorageBuilder.ATLType) - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setAtLeadingEdge(double) - Method in interface nxopen.cam.LeadAngles

License requirements: cam_base ("CAM BASE")
.

setAttachedGeometry(NXObject) - Method in interface nxopen.tooling.AddReusablePart

Sets the attached geometry, this is mainly used to set the initial parameter
License requirements: None.

setAttachedStockLength(Component) - Method in interface nxopen.routing.StockCollection

Set the length of the Stock to which a Component object is attached.

setAttachFidelityCheckData(boolean) - Method in interface nxopen.preferences.SessionNXGateway

Sets the attach FC data flag for I-DEAS gateway
License requirements: None.

setAttachLogFile(boolean) - Method in interface nxopen.uf.UFClone

Refer to UF_CLONE_set_attach_log_file for documentation.

setAttachment(NXObject) - Method in interface nxopen.mechatronics.PhysicsJointBuilder

Sets the attachment.

setAttachment(ConnectorBuilder.AttachmentType) - Method in interface nxopen.motion.ConnectorBuilder

License requirements: mechanisms ("MECHANISMS")
.

setAttachment(GeneralCouplerBuilder.AttachmentType) - Method in interface nxopen.motion.GeneralCouplerBuilder

License requirements: mechanisms ("MECHANISMS")
.

setAttachment(Attachment) - Method in interface nxopen.uistyler.StylerItem

Specifies the updated dialog item attachment information
License requirements: None.

setAttachmentDirection(StandardPartItemBuilder.Direction) - Method in interface nxopen.features.shipdesign.BracketBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setAttachmentPlateOption(StiffenerBuilder.AttachmentOption) - Method in interface nxopen.features.shipdesign.StiffenerBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setAttachmentPoint(Point) - Method in interface nxopen.mechatronics.LinearLimitJointBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setAttachmentPoint(Point) - Method in interface nxopen.mechatronics.LinearSpringJointBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setAttachmentType(RapidSurfaceBuilder.AttachmentTypes) - Method in interface nxopen.features.RapidSurfaceBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setAttachmentType(IssueAttachment.Type) - Method in interface nxopen.issue.IssueAttachment

License requirements: nx_issue_mgmt ("NX Issue Tracking")
.

setAttachmentVector(Direction) - Method in interface nxopen.mechatronics.AngularLimitJointBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setAttachmentVector(Direction) - Method in interface nxopen.mechatronics.AngularSpringJointBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setAttachPoint(Point) - Method in interface nxopen.mechatronics.SlidingJointBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setAttachToIdSymbolVertex(boolean) - Method in interface nxopen.annotations.SymbolStyleBuilder

Sets the id symbol attachment method
License requirements: None.

setAttachType(AttachElementsBuilder.AttachOption) - Method in interface nxopen.cae.AttachElementsBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setAttachTypeLeft(Attachment.AttachType) - Method in interface nxopen.uistyler.Attachment

Sets the attach type left
License requirements: None.

setAttachTypeRight(Attachment.AttachType) - Method in interface nxopen.uistyler.Attachment

Sets the attach type right
License requirements: None.

setAttachTypeTop(Attachment.AttachType) - Method in interface nxopen.uistyler.Attachment

Sets the attach type top
License requirements: None.

setAttentionColor(int) - Method in interface nxopen.preferences.PartVisualizationColorSetting

Sets the color that an HD3D objects associated objects are highlighted with when the HD3D object is selected.

setAtTimestamp(boolean) - Method in interface nxopen.cam.SurfaceRegions

License requirements: cam_base ("CAM BASE")
.

setAttraction(int) - Method in interface nxopen.features.FillHoleBuilder

License requirements: nx_freeform_1 ("basic freeform modeling"), solid_modeling ("SOLIDS MODELING")
.

setAtTrailingEdge(double) - Method in interface nxopen.cam.LeadAngles

License requirements: cam_base ("CAM BASE")
.

setAttribName(String) - Method in interface nxopen.features.shipdesign.TransFrameBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setAttribRef(String) - Method in interface nxopen.features.shipdesign.TransFrameBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setAttribute(Pmi) - Method in interface nxopen.annotations.PmiAttributeBuilder

Sets the Pmi for this annotation
License requirements: None.

setAttribute(CAMAttribute) - Method in interface nxopen.cam.fbm.Feature

Sets the attribute value(s) to the same value(s) as another attribute
License requirements: cam_base ("CAM BASE")
.

setAttribute(String, int) - Method in interface nxopen.NXObject

Deprecated.

Deprecated in NX8.0.0. Use NXObject.setUserAttribute(nxopen.NXObject.AttributeInformation, nxopen.Update.Option) instead.

setAttribute(String, int, Update.Option) - Method in interface nxopen.NXObject

Deprecated.

Deprecated in NX8.0.0. Use NXObject.setUserAttribute(nxopen.NXObject.AttributeInformation, nxopen.Update.Option) instead.

setAttribute(String, double) - Method in interface nxopen.NXObject

Deprecated.

Deprecated in NX8.0.0. Use NXObject.setUserAttribute(nxopen.NXObject.AttributeInformation, nxopen.Update.Option) instead.

setAttribute(String, double, Update.Option) - Method in interface nxopen.NXObject

Deprecated.

Deprecated in NX8.0.0. Use NXObject.setUserAttribute(nxopen.NXObject.AttributeInformation, nxopen.Update.Option) instead.

setAttribute(String, String) - Method in interface nxopen.NXObject

Deprecated.

Deprecated in NX8.0.0. Use NXObject.setUserAttribute(nxopen.NXObject.AttributeInformation, nxopen.Update.Option) instead.

setAttribute(String, String, Update.Option) - Method in interface nxopen.NXObject

Deprecated.

Deprecated in NX8.0.0. Use NXObject.setUserAttribute(nxopen.NXObject.AttributeInformation, nxopen.Update.Option) instead.

setAttribute(String) - Method in interface nxopen.NXObject

Deprecated.

Deprecated in NX8.0.0. Use NXObject.setUserAttribute(nxopen.NXObject.AttributeInformation, nxopen.Update.Option) instead.

setAttribute(String, Update.Option) - Method in interface nxopen.NXObject

Deprecated.

Deprecated in NX8.0.0. Use NXObject.setUserAttribute(nxopen.NXObject.AttributeInformation, nxopen.Update.Option) instead.

setAttribute(String, String) - Method in interface nxopen.pdm.DatabaseAttributeManager

Sets the value of a writable database attribute.

setAttributeAndValue(String[], String[]) - Method in interface nxopen.cam.CutterExport

The attributes and values
License requirements: None.

setAttributeColor(NXColor) - Method in interface nxopen.die.DieAttributesBuilder

License requirements: None.

setAttributeColor(NXColor) - Method in interface nxopen.features.ConcaveFacesBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAttributeCustomizedFormulas(String) - Method in interface nxopen.validate.CheckerNode

License requirements: None.

setAttributeHolder(AttributeHolder) - Method in interface nxopen.routing.PlacePartBuilder

Sets Attribute holder in builder, which is user for template attribute assignment.

setAttributeMaterial(int) - Method in interface nxopen.features.shipdesign.CustomBracketBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setAttributeMaterial(int) - Method in interface nxopen.features.shipdesign.ProfileBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setAttributeMaterial(int) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setAttributeName(String) - Method in interface nxopen.annotations.TableColumnBuilder

License requirements: drafting ("DRAFTING")
.

setAttributeName(int) - Method in interface nxopen.features.shipdesign.CustomBracketBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setAttributeName(int) - Method in interface nxopen.features.shipdesign.ProfileBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setAttributeName(int) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setAttributeName(String) - Method in interface nxopen.routing.AttributeMembersBuilder

License requirements: routing_base ("Routing Basic")
.

setAttributeName(String) - Method in interface nxopen.routing.FindByAttributesBuilder

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setAttributeObjects(NXObject[]) - Method in interface nxopen.AttributePropertiesBaseBuilder

Sets the array of objects that have this attribute
License requirements: None.

setAttributeObjects(NXObject[]) - Method in interface nxopen.pdm.EffectivityAttributePropertiesBuilder

Sets the array of objects that have this attribute
License requirements: nx_4gd_integration ("4th Generation Design")
.

setAttributeOfRootPart(boolean) - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setAttributeOrigin(ExportWeldBuilder.AttributeOriginType) - Method in interface nxopen.weld.ExportWeldBuilder

License requirements: ugweld ("UG WELD") OR structure_weld ("STRUCTURE WELD")
.

setAttributeOrigin(InformationBuilder.AttributeOriginType) - Method in interface nxopen.weld.InformationBuilder

License requirements: ugweld ("UG WELD") OR structure_weld ("STRUCTURE WELD")
.

setAttributes(ElectricalPartBuilder.Attribute[]) - Method in interface nxopen.mechatronics.ElectricalPartBuilder

Set the attributes data.

setAttributes() - Method in interface nxopen.routing.AttributeHolder

Sets the Template Attributes to this object
License requirements: routing_base ("Routing Basic")
.

setAttributes(CharacteristicList) - Method in interface nxopen.routing.RunItem

Sets the attributes on the Run Item.

setAttributesToObjects(NXObject[]) - Method in interface nxopen.features.shipdesign.ShipAttributeHolder

Deprecated.

Deprecated in NX8.0.1. Use ShipAttributeHolder.setAttributesToProxy(nxopen.NXObject) instead.

setAttributesToObjects(boolean, FeatureBuilder) - Method in interface nxopen.features.shipdesign.ShipAttributeHolder

Deprecated.

Deprecated in NX8.0.2. Use ShipAttributeHolder.setAttributesToProxy(nxopen.NXObject) instead.

setAttributesToProxy(NXObject) - Method in interface nxopen.features.shipdesign.ShipAttributeHolder

Sets the attributes to proxy
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setAttributeTitle(String) - Method in interface nxopen.die.DieAttributesBuilder

License requirements: None.

setAttributeTitle(String) - Method in interface nxopen.features.ConcaveFacesBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAttributeTitleName(String[]) - Method in interface nxopen.tooling.GeneralInsertBuilder

Sets the title name of Attribute Of Object Tree list
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setAttributeTitles(String) - Method in interface nxopen.tooling.HoleDatumSymbolBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setAttributeTitles(String) - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setAttributeToProxyFromBuilder(FeatureBuilder) - Method in interface nxopen.features.shipdesign.ShipAttributeHolder

Sets attribute proxy
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setAttributeType(SpecifyBaffleBuilder.AttributeTypes) - Method in interface nxopen.tooling.SpecifyBaffleBuilder

License requirements: ug_mold_design ("UG MOLD")
.

setAttributeValue(String, double) - Method in interface nxopen.cam.fbm.Feature

Sets the attribute value
License requirements: cam_base ("CAM BASE")
.

setAttributeValue(String, String) - Method in interface nxopen.cam.fbm.Feature

Sets the attribute value
License requirements: cam_base ("CAM BASE")
.

setAttributeValue(String, int) - Method in interface nxopen.cam.fbm.Feature

Sets the attribute value
License requirements: cam_base ("CAM BASE")
.

setAttributeValue(String, boolean) - Method in interface nxopen.cam.fbm.Feature

Sets the attribute value
License requirements: cam_base ("CAM BASE")
.

setAttributeValue(String) - Method in interface nxopen.die.DieAttributesBuilder

License requirements: None.

setAttributeValue(String) - Method in interface nxopen.features.ConcaveFacesBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAttributeValue(String) - Method in interface nxopen.routing.AttributeMembersBuilder

License requirements: routing_base ("Routing Basic")
.

setAttributeValue(String) - Method in interface nxopen.routing.FindByAttributesBuilder

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setAttributeValues(NXObject[]) - Method in interface nxopen.annotations.PmiAttributeBuilder

Sets the attribute values
License requirements: None.

setAttributeValues(NXObject[]) - Method in interface nxopen.display.CgfxMattexBuilder

Deprecated.

Deprecated in NX10.0.0. No alternative provided for this class.

setAttributeValues(String) - Method in interface nxopen.tooling.HoleDatumSymbolBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setAttributeValues(String) - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setAttributeValueText(String[]) - Method in interface nxopen.tooling.GeneralInsertBuilder

Sets the title name of Attribute Of Object Tree list
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setAttrName(String) - Method in interface nxopen.mechatronics.ProxyObjectParameterBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setAttrType(int) - Method in interface nxopen.mechatronics.ProxyObjectParameterBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setAuthor(String) - Method in interface nxopen.IgesCreator

License requirements: None.

setAuthor(String) - Method in interface nxopen.Step203Creator

Deprecated.

Deprecated in NX11.0.0. Use StepCreator instead.

setAuthor(String) - Method in interface nxopen.Step214Creator

Deprecated.

Deprecated in NX11.0.0. Use StepCreator instead.

setAuthor(String) - Method in interface nxopen.StepCreator

License requirements: None.

setAuthorization(String) - Method in interface nxopen.Step203Creator

Deprecated.

Deprecated in NX11.0.0. Use StepCreator instead.

setAuthorization(String) - Method in interface nxopen.Step214Creator

Deprecated.

Deprecated in NX11.0.0. Use StepCreator instead.

setAuthorization(String) - Method in interface nxopen.StepCreator

License requirements: None.

setAutoAddNewComps(Tag, boolean) - Method in interface nxopen.uf.UFAssem

Refer to UF_ASSEM_set_auto_add_new_comps for documentation.

setAutoBlank(Tag, UFCam.BlankGeomType, double[]) - Method in interface nxopen.uf.UFCam

Refer to UF_CAM_set_auto_blank for documentation.

setAutoBlockOffsetNegativeX(double) - Method in interface nxopen.cam.GeometryGroup

License requirements: cam_base ("CAM BASE")
.

setAutoBlockOffsetNegativeY(double) - Method in interface nxopen.cam.GeometryGroup

License requirements: cam_base ("CAM BASE")
.

setAutoBlockOffsetNegativeZ(double) - Method in interface nxopen.cam.GeometryGroup

License requirements: cam_base ("CAM BASE")
.

setAutoBlockOffsetPositiveX(double) - Method in interface nxopen.cam.GeometryGroup

License requirements: cam_base ("CAM BASE")
.

setAutoBlockOffsetPositiveY(double) - Method in interface nxopen.cam.GeometryGroup

License requirements: cam_base ("CAM BASE")
.

setAutoBlockOffsetPositiveZ(double) - Method in interface nxopen.cam.GeometryGroup

License requirements: cam_base ("CAM BASE")
.

setAutoBulkHeadName(String) - Method in interface nxopen.features.shipdesign.BulkHeadsBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setAutoCADRevision(DxfdwgCreator.AutoCADRevisionOptions) - Method in interface nxopen.DxfdwgCreator

License requirements: None.

setAutoCentroid(boolean) - Method in interface nxopen.features.sheetmetal.SolidPunchBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal") OR sheet_metal_design ("SHEET METAL DESIGN")
.

setAutoChainOption(boolean) - Method in interface nxopen.cae.Mesh1dBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setAutoCloseOption(boolean) - Method in interface nxopen.routing.HandrailBuilder

License requirements: routing_platform ("Routing Platform")
.

setAutoDatum(boolean) - Method in interface nxopen.tooling.BendInsertDesignBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setAutoDeckName(String) - Method in interface nxopen.features.shipdesign.DecksBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setAutoDimensionsToArcCenter(boolean) - Method in interface nxopen.preferences.SessionSketch

Sets the flag of auto-dimensions to arc centre.

setAutoDisplayResults(ValidatorOptions.ResultsDisplayModeTypes) - Method in interface nxopen.validate.ValidatorOptions

License requirements: None.

setAutoFit(boolean) - Method in interface nxopen.tooling.DieEngTrimAngleCheckBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setAutoGenIdeal(boolean) - Method in interface nxopen.cae.FemCreationOptions

Set flag to create the idealized part with an autogenerate name, ignoring name set in CAE.FemCreationOptions#setCadData
License requirements: None.

setAutoGlobalMaxPenetrationFlag(int) - Method in interface nxopen.motion.BodyContactRecurdyn

License requirements: mechanisms ("MECHANISMS")
.

setAutoInferWall(boolean) - Method in interface nxopen.features.BlendPocketBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAutoLocalMaxPenetrationFlag(int) - Method in interface nxopen.motion.BodyContactRecurdyn

License requirements: mechanisms ("MECHANISMS")
.

setAutolockStatus(boolean) - Method in interface nxopen.uf.UFUgmgr

Refer to UF_UGMGR_set_autolock_status for documentation.

setAutolowLod(boolean) - Method in interface nxopen.JtCreator

License requirements: None.

setAutomatic(boolean) - Method in interface nxopen.annotations.DrawingFormatTitleBuilder

License requirements: drafting ("DRAFTING")
.

setAutomatic(boolean) - Method in interface nxopen.features.FitSurfaceBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setAutomatic(boolean) - Method in interface nxopen.positioning.Constraint

Sets the flag marking the constraint as an "automatic" constraint.

setAutomaticallyCheckItemRevisions(boolean) - Method in interface nxopen.preferences.SessionNXGateway

Sets the automatically checking of items revision flag for I-DEAS import
License requirements: None.

setAutomaticallyExcludeText(boolean) - Method in interface nxopen.annotations.HatchBuilder

License requirements: drafting ("DRAFTING")
.

setAutomaticallySetMachingData(boolean) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setAutomaticallyStartInsert2DComponentCommand(boolean) - Method in interface nxopen.layout2d.CreateComponentFrom3DSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setAutomaticallyStartModelingApplication(boolean) - Method in interface nxopen.layout2d.AssemblyCreationSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setAutomaticAnchorPoint(boolean) - Method in interface nxopen.drawings.GeneralViewStyle

Sets the status of Automatic Anchor Point.

setAutomaticAnchorPoint(boolean) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder

License requirements: drafting ("DRAFTING")
.

setAutomaticAnchorPoint(boolean) - Method in interface nxopen.preferences.GeneralViewPreferences

Sets the status of Automatic anchor point
License requirements: drafting ("DRAFTING")
.

setAutomaticAuxiliaryFloor(boolean) - Method in interface nxopen.cam.SurfaceContourBuilder

License requirements: cam_base ("CAM BASE")
.

setAutomaticAuxiliaryFloorDistance(double) - Method in interface nxopen.cam.SurfaceContourBuilder

License requirements: cam_base ("CAM BASE")
.

setAutomaticConstraintDirection(GeometricConstraintData.ParameterDirection) - Method in interface nxopen.features.GeometricConstraintData

License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setAutomaticConstraintType(GeometricConstraintData.AutoConstraintType) - Method in interface nxopen.features.GeometricConstraintData

License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setAutomaticCustomSymbolUpdate(boolean) - Method in interface nxopen.preferences.SessionDrafting

License requirements: None.

setAutomaticDimensionColor(int) - Method in interface nxopen.preferences.PartSketch

Sets the sketch automatic dimension color
License requirements: None.

setAutomaticFrozenOption(TBSTopologyControllerOptimizationParameters.AutoFrozen) - Method in interface nxopen.cae.optimization.TBSTopologyControllerOptimizationParameters

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setAutomaticMode(boolean) - Method in interface nxopen.cae.DestinationCollectorBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setAutomaticOption(TurnEngageRetractBuilder.AutoOptions) - Method in interface nxopen.cam.TurnEngageRetractBuilder

License requirements: cam_base ("CAM BASE")
.

setAutomaticPartBoundaryMethod(PlanarOperationBuilder.AutomaticPartBoundaryMethodTypes) - Method in interface nxopen.cam.PlanarOperationBuilder

License requirements: cam_base ("CAM BASE")
.

setAutomaticPreview(Layout2dDefinitionLocation, String, boolean) - Method in interface nxopen.layout2d.ComponentDefinitionCollection

Sets the automatic preview mode of definition with the given path
License requirements: nx_layout ("NX Layout")
.

setAutomaticProgression(boolean) - Method in interface nxopen.blockstyler.BodyCollector

License requirements: None.

setAutomaticProgression(boolean) - Method in interface nxopen.blockstyler.CurveCollector

License requirements: None.

setAutomaticProgression(boolean) - Method in interface nxopen.blockstyler.FaceCollector

License requirements: None.

setAutomaticProgression(boolean) - Method in interface nxopen.blockstyler.SectionBuilder

License requirements: None.

setAutomaticProgression(boolean) - Method in interface nxopen.blockstyler.SelectElement

License requirements: None.

setAutomaticProgression(boolean) - Method in interface nxopen.blockstyler.SelectFeature

License requirements: None.

setAutomaticProgression(boolean) - Method in interface nxopen.blockstyler.SelectNode

License requirements: None.

setAutomaticProgression(boolean) - Method in interface nxopen.blockstyler.SelectObject

License requirements: None.

setAutomaticProgression(boolean) - Method in interface nxopen.blockstyler.SpecifyCSYS

License requirements: None.

setAutomaticProgression(boolean) - Method in interface nxopen.blockstyler.SpecifyLocation

License requirements: None.

setAutomaticProgression(boolean) - Method in interface nxopen.blockstyler.SpecifyPlane

License requirements: None.

setAutomaticProgression(boolean) - Method in interface nxopen.blockstyler.SpecifyPoint

License requirements: None.

setAutomaticProgression(boolean) - Method in interface nxopen.blockstyler.SpecifyVector

License requirements: None.

setAutomaticProgression(boolean) - Method in interface nxopen.blockstyler.SuperPoint

License requirements: None.

setAutomaticProgression(boolean) - Method in interface nxopen.blockstyler.SuperSection

License requirements: None.

setAutomaticRouteLevel(boolean) - Method in interface nxopen.preferences.RoutingElectrical

Sets the level at which to automatically route a path.

setAutomaticRule(CorrelModePairingBuilder.Auto) - Method in interface nxopen.cae.CorrelModePairingBuilder

License requirements: nx_correl_base ("FE Correlation")
.

setAutomaticUpdate(boolean) - Method in interface nxopen.annotations.BendTableSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setAutomaticUpdate(boolean) - Method in interface nxopen.annotations.PartsListBuilder

License requirements: None.

setAutomaticUpdate(boolean) - Method in interface nxopen.annotations.TabularNoteStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setAutomaticUpdate(boolean) - Method in interface nxopen.annotations.TitleBlockPreferences

License requirements: drafting ("DRAFTING")
.

setAutomaticUpdate(boolean) - Method in interface nxopen.drawings.GeneralViewStyle

Sets the status of Automatic update, if true then position, hidden lines, silhouettes, view bounds, section views, and section view details updated after a model change else the above items are not updated after a model change.

setAutomaticUpdate(boolean) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder

License requirements: drafting ("DRAFTING")
.

setAutomaticUpdate(boolean) - Method in interface nxopen.layout2d.ComponentSettingsBuilder

License requirements: nx_layout ("NX Layout")
.

setAutomaticUpdate(boolean) - Method in interface nxopen.preferences.GeneralViewPreferences

Sets the status of Automatic Update. if true, then position, hidden lines, silhouettes, view bounds, section views and section view details are updated after a model change else above items are not updated after a model change.

setAutoNameToggle(boolean) - Method in interface nxopen.features.shipdesign.BulkHeadsBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setAutoNameToggle(boolean) - Method in interface nxopen.features.shipdesign.DecksBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setAutoOrderGrid(boolean) - Method in interface nxopen.cae.xyplot.GridStyle2DColorContour

License requirements: nx_ftk ("NX Advanced Graphing")
.

setAutopairs(AutoPairs) - Method in interface nxopen.cae.AutoBCBuilder

License requirements: None.

setAutoplaced(boolean) - Method in interface nxopen.annotations.BaseLinearDimensionBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setAutoplaced(boolean) - Method in interface nxopen.annotations.RadialDimensionBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setAutoPopulateSideTwoOption(boolean) - Method in interface nxopen.features.MidSurfaceByFacePairsBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAutoPosition(boolean) - Method in interface nxopen.cam.BoundaryTurnBlank

License requirements: cam_base ("CAM BASE")
.

setAutoPositionOption(boolean) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setAutoRemoveToggle(boolean) - Method in interface nxopen.cae.MergeFaceBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setAutoResetOption(boolean) - Method in interface nxopen.cae.Mesh2dBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setAutoResetOption(boolean) - Method in interface nxopen.cae.Mesh3dHybridBuilder

License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")
.

setAutoResetOption(boolean) - Method in interface nxopen.cae.Mesh3dTetBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setAutoReverseDuringDrag(boolean) - Method in interface nxopen.blockstyler.LinearDimension

License requirements: None.

setAutoRouteStockStyle(StockStyle) - Method in interface nxopen.preferences.RoutingElectrical

Sets the option to Auto Route using centerline stock style (i.e. none) or simple stock style.

setAutoSave(boolean) - Method in interface nxopen.cam.CleanupSettings

License requirements: cam_base ("CAM BASE")
.

setAutoSaveBoundary(boolean) - Method in interface nxopen.cam.OutputUncutRegions

License requirements: cam_base ("CAM BASE")
.

setAutoscale(boolean) - Method in interface nxopen.drawings.StandardViewsBuilder

License requirements: nx_layout ("NX Layout")
.

setAutoScale(boolean) - Method in interface nxopen.drawings.ViewCreationWizardBuilder

License requirements: drafting ("DRAFTING")
.

setAutoScale(boolean) - Method in interface nxopen.geometricutilities.CombOptionsBuilder

License requirements: None.

setAutoSelectBoundary(boolean) - Method in interface nxopen.tooling.CoolingDefineChannelBuilder

Sets the value that whether the boundary body is automatically got or not
License requirements: ug_mold_design ("UG MOLD")
.

setAutoSelectHoleByType(boolean) - Method in interface nxopen.tooling.FaceColorManagementBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setAutoSizeOption(boolean) - Method in interface nxopen.cae.Mesh3dTetBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setAutoStartBaseView(boolean) - Method in interface nxopen.drawings.DrawingSheetBuilder

Deprecated.

Deprecated in NX7.5.0. Use DrawingSheetBuilder.setAutoStartViewCreation(boolean) instead.

setAutoStartViewCreation(boolean) - Method in interface nxopen.drawings.DrawingSheetBuilder

License requirements: None.

setAutoTarget(boolean) - Method in interface nxopen.tooling.ReusablePocketBuilder

License requirements: None.

setAutoTextIsland(boolean) - Method in interface nxopen.annotations.HatchStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setAutoToggle(boolean) - Method in interface nxopen.cam.InspectionCmmCommandBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setAutoUpdate(boolean) - Method in interface nxopen.annotations.CutSheetBuilder

License requirements: routing_harness ("Routing Harness")
.

setAutoUpdate(boolean) - Method in interface nxopen.annotations.PinListBuilder

License requirements: routing_harness ("Routing Harness")
.

setAutoUpdate(Tag) - Method in interface nxopen.uf.UFDraw

Refer to UF_DRAW_set_auto_update for documentation.

setAutoWallSelection(boolean) - Method in interface nxopen.cam.GeometryCiBuilder

License requirements: None.

setAuxFloor(boolean) - Method in interface nxopen.cam.DmCmMultiplePassesCiBuilder

License requirements: cam_base ("CAM BASE")
.

setAuxiliaryFloorColor(NXColor) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setAuxiliaryFloorColorSelection(Preferences.AuxiliaryFloorColorSelectionTypes) - Method in interface nxopen.cam.Preferences

Deprecated.

Deprecated in NX8.0.0. Use CAM.Preferences#getSelection and CAM.Preferences#setSelection instead.

setAvailableFontTypesAsString(String) - Method in interface nxopen.blockstyler.TextColorFontWidth

License requirements: None.

setAvailableItems(String[], MATLABClientBuilder.DataType[]) - Method in interface nxopen.mechatronics.MATLABClientBuilder

Set the available MATLAB items.

setAvailableItems(String[], OPCClientBuilder.TagDataType[]) - Method in interface nxopen.mechatronics.OPCClientBuilder

Set the available OPC items.

setAvailableMaterial(String) - Method in interface nxopen.annotations.MaterialSpecificationBuilder

License requirements: None.

setAvailableOptions(int) - Method in interface nxopen.blockstyler.LineFont

License requirements: None.

setAvailFilterToggle(boolean) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setAvailStateEnum(InspectionConstructedFeatureBuilder.AvailableStateType) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setAveragingCriteria(Result.Averaging) - Method in interface nxopen.cae.ResultParameters

Set averaging criteria
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setAvoidanceAfterLastRetract(boolean) - Method in interface nxopen.cam.NcmTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setAvoidanceBetweenRegions(boolean) - Method in interface nxopen.cam.NcmTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setAvoidanceForAutomaticEngage(boolean) - Method in interface nxopen.cam.NcmTurnRoughFinishBuilder

License requirements: cam_base ("CAM BASE")
.

setAvoidanceForAutomaticRetract(boolean) - Method in interface nxopen.cam.NcmTurnRoughFinishBuilder

License requirements: cam_base ("CAM BASE")
.

setAvoidanceForMinimumClearance(boolean) - Method in interface nxopen.cam.NcmTurnRoughFinishBuilder

License requirements: cam_base ("CAM BASE")
.

setAvoidanceMethod(ToolPathTiltAvoidance.MethodType) - Method in interface nxopen.cam.ToolPathTiltAvoidance

License requirements: None.

setAvoidanceToStartOfEngage(boolean) - Method in interface nxopen.cam.NcmTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setAvoidUsedNXLayers(boolean) - Method in interface nxopen.DxfdwgImporter

License requirements: None.

setAxial(String) - Method in interface nxopen.sim.KinematicChain

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setAxialDistance(double) - Method in interface nxopen.cam.BoundaryTurnMemberOffset

License requirements: cam_base ("CAM BASE")
.

setAxialOffsetDirection(Direction) - Method in interface nxopen.features.OffsetCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setAxialPercent(double) - Method in interface nxopen.cam.InspectionProbeTrackingBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setAxialPlaneMode(TurnAvoidanceClearanceBuilder.AxialPlaneModes) - Method in interface nxopen.cam.TurnAvoidanceClearanceBuilder

License requirements: cam_base ("CAM BASE")
.

setAxialPlaneMode(TurnProbeClearanceBuilder.AxialPlaneModes) - Method in interface nxopen.cam.TurnProbeClearanceBuilder

License requirements: cam_base ("CAM BASE")
.

setAxialPlanePoint(Point) - Method in interface nxopen.cam.TurnAvoidanceClearanceBuilder

License requirements: cam_base ("CAM BASE")
.

setAxialPlanePoint(Point) - Method in interface nxopen.cam.TurnProbeClearanceBuilder

License requirements: cam_base ("CAM BASE")
.

setAxialPlaneValue(double) - Method in interface nxopen.cam.TurnAvoidanceClearanceBuilder

License requirements: cam_base ("CAM BASE")
.

setAxialPlaneValue(double) - Method in interface nxopen.cam.TurnProbeClearanceBuilder

License requirements: cam_base ("CAM BASE")
.

setAxialSafeClearance(double) - Method in interface nxopen.cam.NcmTurnRoughFinishBuilder

License requirements: cam_base ("CAM BASE")
.

setAxialSafeClearance(double) - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder

License requirements: cam_base ("CAM BASE")
.

setAxiOptions(AxiSymmetricParameters.Options) - Method in interface nxopen.cae.AxiSymmetricParameters

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setAxis(BaseFrameBarBuilder.AxisType) - Method in interface nxopen.annotations.BaseFrameBarBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setAxis(Axis) - Method in interface nxopen.cae.ElementRevolveBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setAxis(Axis) - Method in interface nxopen.cae.MorphRevolvedMeshBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setAxis(Axis) - Method in interface nxopen.cae.NodeRotateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setAxis(TBSTopologyLinkCondition.AxisType) - Method in interface nxopen.cae.optimization.TBSTopologyLinkCondition

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setAxis(NXObject) - Method in interface nxopen.cam.InspectionProbeTrackingBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setAxis(NXObject) - Method in interface nxopen.cam.NcmClearanceBuilder

License requirements: cam_base ("CAM BASE")
.

setAxis(NXObject) - Method in interface nxopen.cam.ProbeTrackingBuilder

License requirements: None.

setAxis(NXObject) - Method in interface nxopen.cam.WedmPointDefinitionBuilder

License requirements: cam_base ("CAM BASE")
.

setAxis(Axis) - Method in interface nxopen.drawings.ViewProjectionPlaneBuilder

License requirements: nx_layout ("NX Layout")
.

setAxis(Axis) - Method in interface nxopen.features.ConeBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAxis(Axis) - Method in interface nxopen.features.CylinderBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setAxis(Axis) - Method in interface nxopen.features.MoveFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAxis(Axis) - Method in interface nxopen.features.PatternFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setAxis(Axis) - Method in interface nxopen.features.RevolveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setAxis(Axis) - Method in interface nxopen.routing.IAxisPort

Sets the axis that defines the port
License requirements: routing_base ("Routing Basic")
.

setAxisAllowReversal(UFVariant, String, boolean) - Method in interface nxopen.uf.UFSim

Refer to UF_SIM_set_axis_allow_reversal for documentation.

setAxisColor(NXColor) - Method in interface nxopen.fields.DisplayPropertiesBuilder

License requirements: None.

setAxisDirectionI(double) - Method in interface nxopen.cam.InspectionConeFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setAxisDirectionI(double) - Method in interface nxopen.cam.InspectionCylinderFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setAxisDirectionI(double) - Method in interface nxopen.cam.InspectionTorusFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setAxisDirectionJ(double) - Method in interface nxopen.cam.InspectionConeFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setAxisDirectionJ(double) - Method in interface nxopen.cam.InspectionCylinderFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setAxisDirectionJ(double) - Method in interface nxopen.cam.InspectionTorusFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setAxisDirectionK(double) - Method in interface nxopen.cam.InspectionConeFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setAxisDirectionK(double) - Method in interface nxopen.cam.InspectionCylinderFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setAxisDirectionK(double) - Method in interface nxopen.cam.InspectionTorusFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setAxisDirectionSearchMethod(DurabilityStrainGageAnalyzerBuilder.AxisDirectionSearchMethodEnum) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setAxisExtrapolation(InspectionMethodBuilder.AxisExtrapolationTypes) - Method in interface nxopen.cam.InspectionAnalyzeBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setAxisExtrapolationMode(InspectionMethodBuilder.AxisExtrapolationTypes) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setAxisJoint(NXObject) - Method in interface nxopen.mechatronics.PositionControlBuilder

Sets the joint.

setAxisJoint(NXObject) - Method in interface nxopen.mechatronics.SpeedControlBuilder

Sets the joint.

setAxisLabel(String) - Method in interface nxopen.cae.AfuAbscissaHeaderInfo

Sets the customized axis label
License requirements: nx_ftk ("NX Advanced Graphing")
.

setAxisLabel(String) - Method in interface nxopen.cae.AfuOrdinateHeaderInfo

Sets the customized axis label
License requirements: nx_ftk ("NX Advanced Graphing")
.

setAxisOfRotation(MultiBladeGeomBuilder.PartAxisOfRotationTypes) - Method in interface nxopen.cam.MultiBladeGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setAxisOfRotation(PartAxisBuilder.PartAxisOfRotationTypes) - Method in interface nxopen.cam.PartAxisBuilder

License requirements: cam_base ("CAM BASE")
.

setAxisOfRotation(RotaryFinishGeomBuilder.PartAxisOfRotationTypes) - Method in interface nxopen.cam.RotaryFinishGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setAxisOption(WedmPointDefinitionBuilder.WireAxisStates) - Method in interface nxopen.cam.WedmPointDefinitionBuilder

License requirements: cam_base ("CAM BASE")
.

setAxisOption(OrientXpressBuilder.Axis) - Method in interface nxopen.geometricutilities.OrientXpressBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setAxisOrientation(AxisOrientation) - Method in interface nxopen.SketchInPlaceBuilder

License requirements: None.

setAxisOrientationInfer(AxisOrientation) - Method in interface nxopen.SketchInPlaceBuilder

License requirements: None.

setAxisPropertyValue(String, Axis) - Method in interface nxopen.cae.PropertyTable

Sets the axis Axis
License requirements: None.

setAxisReference(Direction) - Method in interface nxopen.SketchInPlaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT")
.

setAxisReversed(boolean) - Method in interface nxopen.features.DatumAxisBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setAxisRotaryDirMode(UFVariant, String, UFSim.AxisRotDirType) - Method in interface nxopen.uf.UFSim

Refer to UF_SIM_set_axis_rotary_dir_mode for documentation.

setAxissearch(DurabilityAxisSearch) - Method in interface nxopen.cae.DurabilityEventBuilder

The stress axes stored inside the event.

setAxisType(AxisType) - Method in interface nxopen.cae.xyplot.AxisStyleSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setAxisType(ForceTorqueControlBuilder.AxisJointType) - Method in interface nxopen.mechatronics.ForceTorqueControlBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setAxisType(GearBuilder.AxisJointType) - Method in interface nxopen.mechatronics.GearBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setAxisType(PositionControlBuilder.Axis) - Method in interface nxopen.mechatronics.PositionControlBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setAxisType(PositionSensorBuilder.AxisJointType) - Method in interface nxopen.mechatronics.PositionSensorBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setAxisType(SpeedControlBuilder.AxisJointType) - Method in interface nxopen.mechatronics.SpeedControlBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setAxisType(SpringDamperBuilder.AxisJointType) - Method in interface nxopen.mechatronics.SpringDamperBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setAxisType(VelocitySensorBuilder.AxisJointType) - Method in interface nxopen.mechatronics.VelocitySensorBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setAxisType(VirtualAxisBuilder.VirtualAxisType) - Method in interface nxopen.mechatronics.VirtualAxisBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setAxisTypeEnum(FlipComponentBuilder.AxisType) - Method in interface nxopen.formboard.FlipComponentBuilder

License requirements: routing_harness ("Routing Harness")
.

setAxisVector(Direction) - Method in interface nxopen.cam.InspectionConeFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setAxisVector(Direction) - Method in interface nxopen.cam.InspectionCylinderFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setAxisVector(Direction) - Method in interface nxopen.features.subdivision.SubdivisionRevolveBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setAxisVector(Direction) - Method in interface nxopen.features.ToolingBoxBuilder

License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard") OR studio_free_form ("STUDIO FREE FORM") OR features_modeling ("FEATURES MODELING") OR solid_modeling ("SOLIDS MODELING")
.

setAxisVector(Direction) - Method in interface nxopen.mechatronics.CurveOnCurveJointBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setAxisVector(Direction) - Method in interface nxopen.mechatronics.CylindricalJointBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setAxisVector(Direction) - Method in interface nxopen.mechatronics.HingeJointBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setAxisVector(Direction) - Method in interface nxopen.mechatronics.PathConstraintJointBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setAxisVector(Direction) - Method in interface nxopen.mechatronics.PlanarJointBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setAxisVector(Direction) - Method in interface nxopen.mechatronics.PointOnCurveJointBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setAxisVector(Direction) - Method in interface nxopen.mechatronics.ScrewJointBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setAxisVector(Direction) - Method in interface nxopen.mechatronics.TransportSurfaceBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setAxisVector(Direction) - Method in interface nxopen.tooling.StockSizeBuilder

License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setAxiSymmetricParameters(AxiSymmetricParameters) - Method in interface nxopen.cae.ResultParameters

Set Axi Symmetric Parameters type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setB(String) - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder

License requirements: drafting ("DRAFTING")
.

setB(String) - Method in interface nxopen.annotations.SurfaceFinishBuilder

License requirements: None.

setback() - Method in interface nxopen.features.DeleteFaceBuilder

Returns the set back options.

setBackAngle(double) - Method in interface nxopen.features.vehicledesign.BaseDataPassengerBuilder

Deprecated.

Deprecated in NX9.0.1. Obtain the expression using BaseDataPassengerBuilder.backAngleExp() to query or edit it.

setBackAngleA40(String) - Method in interface nxopen.HumanPosturePredictionBuilder

License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setBackAngleDbl(double) - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setBackAngleFixed(boolean) - Method in interface nxopen.features.vehicledesign.BaseDataDriverBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setBackAttributes(String, String, int) - Method in interface nxopen.die.SteelInsertSectionBuilder

Sets the back faces attributes
License requirements: ug_die_design ("Die Design")
.

setBackburnDistance(double) - Method in interface nxopen.cam.WedmIntGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setBackburnFlag(int) - Method in interface nxopen.cam.WedmGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setBackburnFlag(int) - Method in interface nxopen.cam.WedmIntGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setBackburnFlag(int) - Method in interface nxopen.cam.WedmOperationBuilder

License requirements: cam_base ("CAM BASE")
.

setBackburnPasses(int) - Method in interface nxopen.cam.WedmBasedGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setBackburnPasses(WedmGeomBuilder.BackburnPassesTypes) - Method in interface nxopen.cam.WedmGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setBackburnPasses(WedmOperationBuilder.BackburnPassesTypes) - Method in interface nxopen.cam.WedmOperationBuilder

License requirements: cam_base ("CAM BASE")
.

setBackClip(boolean) - Method in interface nxopen.drawings.ViewStylePerspectiveBuilder

License requirements: drafting ("DRAFTING")
.

setBackClipDistance(double) - Method in interface nxopen.drawings.ViewStylePerspectiveBuilder

License requirements: drafting ("DRAFTING")
.

setBackClipping(boolean) - Method in interface nxopen.drawings.PerspectiveViewStyle

Sets the status of back clipping
License requirements: drafting ("DRAFTING")
.

setBackClippingDistance(double) - Method in interface nxopen.display.CameraBuilder

License requirements: None.

setBackClippingDistance(double) - Method in interface nxopen.drawings.PerspectiveViewStyle

Sets the value of back clipping distance
License requirements: drafting ("DRAFTING")
.

SetbackData() - Constructor for class nxopen.features.EdgeBlendBuilder.SetbackData

setbackData - Variable in class nxopen.uf.UFModl.EdgeBlendMultData

setBackDistance(double) - Method in interface nxopen.die.FlangeSteelRibChildBuilder

Sets the back distance of the Flange Steel Rib
License requirements: ug_die_design ("Die Design")
.

setBackDistance(double) - Method in interface nxopen.die.FlangeSteelRibParentBuilder

Sets the back distance of the Flange Steel Ribs
License requirements: ug_die_design ("Die Design")
.

setBackEdgeOffset(double) - Method in interface nxopen.weld.EasyPatternBuilder

License requirements: ugweld ("UG WELD")
.

setBackground(boolean) - Method in interface nxopen.drawings.SectionViewStyle

Sets the status of background.

setBackground(boolean) - Method in interface nxopen.drawings.ViewStyleSectionBuilder

License requirements: drafting ("DRAFTING")
.

setBackground(boolean) - Method in interface nxopen.preferences.SectionViewPreferences

Sets the status of background.

setBackground(DisplayableObject[]) - Method in interface nxopen.ViewDependentDisplayManager

Sets visibility of background objects.

setBackgroundCategory(Background.CategoryType) - Method in interface nxopen.display.Background

License requirements: None.

setBackgroundColor(NXColor) - Method in interface nxopen.cae.xyplot.BaseGridLayoutStyleSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setBackgroundColor(double[]) - Method in interface nxopen.display.ImageBaseBuilder

Sets the background color (RGB value) of the image.

setBackgroundOption(SessionSketch.BackgroundType) - Method in interface nxopen.preferences.SessionSketch

Sets the background option
License requirements: None.

setBackgroundType(Background.Type) - Method in interface nxopen.display.Background

License requirements: None.

setbackMethod() - Method in interface nxopen.features.shipdesign.StiffenerBySupportPathBuilder

Returns the setback method.

setbackOption() - Method in interface nxopen.features.EdgeBlendBuilder

Returns the setback option for edge blend
License requirements: None.

setbackPoint() - Method in interface nxopen.geometricutilities.BlendSetbackBuilder

Returns the setback point for u/v direction.

setBackProximity(double) - Method in interface nxopen.features.shipdesign.SectionViewBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setBackReliefToggle(int) - Method in interface nxopen.die.SteelInsertBuilder

Sets the back relief toggle
License requirements: ug_die_design ("Die Design")
.

setBackShape(ISurface[]) - Method in interface nxopen.die.SteelInsertBuilder

License requirements: ug_die_design ("Die Design")
.

setBackSideReliefDistance(String) - Method in interface nxopen.die.SteelInsertSectionBuilder

License requirements: ug_die_design ("Die Design")
.

setBackView(boolean) - Method in interface nxopen.drawings.ViewCreationWizardBuilder

License requirements: drafting ("DRAFTING")
.

setBackwardExtension(Expression) - Method in interface nxopen.mechanicalrouting.PathTransitionBuilder

License requirements: routing_base ("Routing Basic")
.

setBackwardExtension(double) - Method in interface nxopen.routing.FixturePort

Sets the backward extension of FixturePort , i.e. the minimum length that a segment must remain straight before entering a FixturePort
License requirements: routing_base ("Routing Basic")

Created in NX4.0.0

setBackwardExtension(double) - Method in interface nxopen.routing.ProxyPort

Sets the backward extension of ProxyPort , i.e. the minimum length that a segment must remain straight before entering a ProxyPort
License requirements: routing_base ("Routing Basic")

Created in NX8.0.0

setBackwardExtensionObject(Expression) - Method in interface nxopen.routing.FixturePort

Sets the backward extension object for a port, i.e. an expression representing the minimum length that a segment must remain straight before entering a Port
License requirements: routing_base ("Routing Basic")

Created in NX4.0.0

setBackwardExtensionObject(Expression) - Method in interface nxopen.routing.ProxyPort

Sets the backward extension object for a port, i.e. an expression representing the minimum length that a segment must remain straight before entering a Port
License requirements: routing_base ("Routing Basic")

Created in NX8.0.0

setBalanced(boolean) - Method in interface nxopen.tooling.MoldFillingBuilder

License requirements: ug_mold_design ("UG MOLD")
.

setBalanceType(HumanData.InverseKinematicsBalanceType) - Method in interface nxopen.features.HumanBuilder

License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setBalCavityNumber(LayoutBuilder.BalNumber) - Method in interface nxopen.tooling.LayoutBuilder

License requirements: None.

setBalloonText(String) - Method in interface nxopen.annotations.BalloonNoteBuilder

License requirements: None.

setBalloonTooltipImage(String) - Method in interface nxopen.blockstyler.AngularDimension

License requirements: None.

setBalloonTooltipImage(String) - Method in interface nxopen.blockstyler.BodyCollector

License requirements: None.

setBalloonTooltipImage(String) - Method in interface nxopen.blockstyler.Button

License requirements: None.

setBalloonTooltipImage(String) - Method in interface nxopen.blockstyler.CurveCollector

License requirements: None.

setBalloonTooltipImage(String) - Method in interface nxopen.blockstyler.DoubleBlock

License requirements: None.

setBalloonTooltipImage(String) - Method in interface nxopen.blockstyler.ExpressionBlock

License requirements: None.

setBalloonTooltipImage(String) - Method in interface nxopen.blockstyler.FaceCollector

License requirements: None.

setBalloonTooltipImage(String) - Method in interface nxopen.blockstyler.IntegerBlock

License requirements: None.

setBalloonTooltipImage(String) - Method in interface nxopen.blockstyler.Label

License requirements: None.

setBalloonTooltipImage(String) - Method in interface nxopen.blockstyler.LinearDimension

License requirements: None.

setBalloonTooltipImage(String) - Method in interface nxopen.blockstyler.ObjectColorPicker

License requirements: None.

setBalloonTooltipImage(String) - Method in interface nxopen.blockstyler.OnPathDimension

License requirements: None.

setBalloonTooltipImage(String) - Method in interface nxopen.blockstyler.RadiusDimension

License requirements: None.

setBalloonTooltipImage(String) - Method in interface nxopen.blockstyler.RGBColorPicker

License requirements: None.

setBalloonTooltipImage(String) - Method in interface nxopen.blockstyler.SectionBuilder

License requirements: None.

setBalloonTooltipImage(String) - Method in interface nxopen.blockstyler.SelectFeature

License requirements: None.

setBalloonTooltipImage(String) - Method in interface nxopen.blockstyler.SelectObject

License requirements: None.

setBalloonTooltipImage(String) - Method in interface nxopen.blockstyler.SpecifyCSYS

License requirements: None.

setBalloonTooltipImage(String) - Method in interface nxopen.blockstyler.SpecifyOrientation

License requirements: None.

setBalloonTooltipImage(String) - Method in interface nxopen.blockstyler.SpecifyPlane

License requirements: None.

setBalloonTooltipImage(String) - Method in interface nxopen.blockstyler.SpecifyPoint

License requirements: None.

setBalloonTooltipImage(String) - Method in interface nxopen.blockstyler.SpecifyVector

License requirements: None.

setBalloonTooltipImage(String) - Method in interface nxopen.blockstyler.SuperPoint

License requirements: None.

setBalloonTooltipImage(String) - Method in interface nxopen.blockstyler.SuperSection

License requirements: None.

setBalloonTooltipImages(String[]) - Method in interface nxopen.blockstyler.Enumeration

Sets the BalloonTooltipImages
License requirements: None.

setBalloonTooltipImages(String[]) - Method in interface nxopen.blockstyler.StringBlock

Sets the BalloonTooltipImages
License requirements: None.

setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.AngularDimension

License requirements: None.

setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.BodyCollector

License requirements: None.

setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.Button

License requirements: None.

setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.CurveCollector

License requirements: None.

setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.DoubleBlock

License requirements: None.

setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.Enumeration

License requirements: None.

setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.ExpressionBlock

License requirements: None.

setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.FaceCollector

License requirements: None.

setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.IntegerBlock

License requirements: None.

setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.Label

License requirements: None.

setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.LinearDimension

License requirements: None.

setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.ObjectColorPicker

License requirements: None.

setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.OnPathDimension

License requirements: None.

setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.RadiusDimension

License requirements: None.

setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.RGBColorPicker

License requirements: None.

setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.SectionBuilder

License requirements: None.

setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.SelectFeature

License requirements: None.

setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.SelectObject

License requirements: None.

setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.SpecifyAxis

License requirements: None.

setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.SpecifyCSYS

License requirements: None.

setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.SpecifyOrientation

License requirements: None.

setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.SpecifyPlane

License requirements: None.

setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.SpecifyPoint

License requirements: None.

setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.SpecifyVector

License requirements: None.

setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.StringBlock

License requirements: None.

setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.SuperPoint

License requirements: None.

setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.SuperSection

License requirements: None.

setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.Toggle

License requirements: None.

setBalloonTooltipOffImage(String) - Method in interface nxopen.blockstyler.Toggle

License requirements: None.

setBalloonTooltipOffText(String) - Method in interface nxopen.blockstyler.Toggle

License requirements: None.

setBalloonTooltipOnImage(String) - Method in interface nxopen.blockstyler.Toggle

License requirements: None.

setBalloonTooltipOnText(String) - Method in interface nxopen.blockstyler.Toggle

License requirements: None.

setBalloonTooltipPointImage(String) - Method in interface nxopen.blockstyler.SpecifyAxis

License requirements: None.

setBalloonTooltipPointText(String) - Method in interface nxopen.blockstyler.SpecifyAxis

License requirements: None.

setBalloonTooltipText(String) - Method in interface nxopen.blockstyler.AngularDimension

License requirements: None.

setBalloonTooltipText(String) - Method in interface nxopen.blockstyler.BodyCollector

License requirements: None.

setBalloonTooltipText(String) - Method in interface nxopen.blockstyler.Button

License requirements: None.

setBalloonTooltipText(String) - Method in interface nxopen.blockstyler.CurveCollector

License requirements: None.

setBalloonTooltipText(String) - Method in interface nxopen.blockstyler.DoubleBlock

License requirements: None.

setBalloonTooltipText(String) - Method in interface nxopen.blockstyler.ExpressionBlock

License requirements: None.

setBalloonTooltipText(String) - Method in interface nxopen.blockstyler.FaceCollector

License requirements: None.

setBalloonTooltipText(String) - Method in interface nxopen.blockstyler.IntegerBlock

License requirements: None.

setBalloonTooltipText(String) - Method in interface nxopen.blockstyler.Label

License requirements: None.

setBalloonTooltipText(String) - Method in interface nxopen.blockstyler.LinearDimension

License requirements: None.

setBalloonTooltipText(String) - Method in interface nxopen.blockstyler.ObjectColorPicker

License requirements: None.

setBalloonTooltipText(String) - Method in interface nxopen.blockstyler.OnPathDimension

License requirements: None.

setBalloonTooltipText(String) - Method in interface nxopen.blockstyler.RadiusDimension

License requirements: None.

setBalloonTooltipText(String) - Method in interface nxopen.blockstyler.RGBColorPicker

License requirements: None.

setBalloonTooltipText(String) - Method in interface nxopen.blockstyler.SectionBuilder

License requirements: None.

setBalloonTooltipText(String) - Method in interface nxopen.blockstyler.SelectFeature

License requirements: None.

setBalloonTooltipText(String) - Method in interface nxopen.blockstyler.SelectObject

License requirements: None.

setBalloonTooltipText(String) - Method in interface nxopen.blockstyler.SpecifyCSYS

License requirements: None.

setBalloonTooltipText(String) - Method in interface nxopen.blockstyler.SpecifyOrientation

License requirements: None.

setBalloonTooltipText(String) - Method in interface nxopen.blockstyler.SpecifyPlane

License requirements: None.

setBalloonTooltipText(String) - Method in interface nxopen.blockstyler.SpecifyPoint

License requirements: None.

setBalloonTooltipText(String) - Method in interface nxopen.blockstyler.SpecifyVector

License requirements: None.

setBalloonTooltipText(String) - Method in interface nxopen.blockstyler.SuperPoint

License requirements: None.

setBalloonTooltipText(String) - Method in interface nxopen.blockstyler.SuperSection

License requirements: None.

setBalloonTooltipTexts(String[]) - Method in interface nxopen.blockstyler.Enumeration

Sets the BalloonTooltipTexts
License requirements: None.

setBalloonTooltipTexts(String[]) - Method in interface nxopen.blockstyler.StringBlock

Sets the BalloonTooltipTexts
License requirements: None.

setBalloonTooltipVectorImage(String) - Method in interface nxopen.blockstyler.SpecifyAxis

License requirements: None.

setBalloonTooltipVectorText(String) - Method in interface nxopen.blockstyler.SpecifyAxis

License requirements: None.

setBallRadius(double) - Method in interface nxopen.motion.JointFrictionAdams

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using Motion.JointFrictionAdams#ballRadiusExpression to query or edit it.

setBallRadius(double) - Method in interface nxopen.motion.JointFrictionRecurDyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using Motion.JointFrictionRecurDyn#ballRadiusExpression to query or edit it.

setBankAngleCurve(MotionFunction) - Method in interface nxopen.motion.RoadBuilder

License requirements: mechanisms ("MECHANISMS")
.

setBankAngleCurve(MotionFunction) - Method in interface nxopen.motion.SegmentBuilder

License requirements: mechanisms ("MECHANISMS")
.

setBannerMessage(String) - Method in interface nxopen.PlotBuilder

License requirements: None.

setBarrierCsys(CoordinateSystem) - Method in interface nxopen.features.HumanBuilder

Sets barrier csys for active reach, the human will be hold by the position and orientaion of the csys in active reach
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setBarrierNormal(Vector3d) - Method in interface nxopen.features.HumanBuilder

Sets barrier normal direction for active reach, the human will be hold by the position of point and orientaion of the barrier normal in active reach
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setBarrierPoint(Point) - Method in interface nxopen.features.HumanBuilder

Sets barrier point active reach, the human will be hold by the position of point in active reach
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setBase(NXObject) - Method in interface nxopen.mechatronics.PhysicsJointBuilder

Sets the base.

setBaseAnchorPoint(Point) - Method in interface nxopen.mechatronics.PhysicsJointBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setBaseAttributes(String, String, int) - Method in interface nxopen.die.DrawDiePunchSectionBuilder

Sets the base faces attributes.

setBaseAttributes(String, String, int) - Method in interface nxopen.die.SteelInsertSectionBuilder

Sets the base faces attributes
License requirements: ug_die_design ("Die Design")
.

setBaseAxisVector(Direction) - Method in interface nxopen.mechatronics.PhysicsJointBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setBaseBody(Body) - Method in interface nxopen.tooling.BendOperationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setBaseBody(Body) - Method in interface nxopen.tooling.DirectUnbendBuilder

License requirements: None.

setBaseCenter(Point) - Method in interface nxopen.cae.BoundingVolumeBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setBaseEdges(ScCollector) - Method in interface nxopen.features.sheetmetal.AeroFlangeBuilder

License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setBaseEnableMaxFacetSize(boolean) - Method in interface nxopen.motion.BodyContactLms

License requirements: mechanisms ("MECHANISMS")
.

setBaseEnd(Point) - Method in interface nxopen.MeasureAngleBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setBaseFace(Face) - Method in interface nxopen.features.sheetmetal.AeroUnformBuilder

License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setBaseFace(Face) - Method in interface nxopen.features.sheetmetal.ConvertToSheetmetalBuilder

Sets the base face from which the thickness of the part is determined.

setBaseFactor(int) - Method in interface nxopen.features.SilhouetteFlangeBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setBaseFlange(DirectionOption, IProfile[]) - Method in interface nxopen.die.DeckParentBuilder

Sets the base flange profile of the draw die punch.

setBaseInstance(int, int) - Method in interface nxopen.geometricutilities.ReferencePattern

Set the base instance
License requirements: None.

setBaseline(boolean) - Method in interface nxopen.annotations.BaseFrameBarBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setBaselineDirectionReversed(boolean) - Method in interface nxopen.annotations.OrdinateBaselineBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setBaselineForComparison(DrawingCompareSettingsBuilder.ComparisonBaseline) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use TrackDrawingChangesGeneralBuilder.setBaselineOfComparison(nxopen.drawings.TrackDrawingChangesGeneralBuilder.BaselineOfComparisonType) instead.

setBaselineLabelColor(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setBaselineLabelFont(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setBaselineLabelItalicized(boolean) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setBaselineLabelWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setBaselineOfComparison(TrackDrawingChangesGeneralBuilder.BaselineOfComparisonType) - Method in interface nxopen.drawings.TrackDrawingChangesGeneralBuilder

License requirements: drafting ("DRAFTING")
.

setBaselineOffset(double) - Method in interface nxopen.annotations.DimensionPreferences

Sets the offset between dimension lines of baseline dimensions
License requirements: None.

setBaselineOffset(double) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setBaselineTicColor(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setBaselineTicDisplay(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setBaselineTicFont(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setBaselineTicLength(double) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setBaselineTicWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setBaselineVector(Direction) - Method in interface nxopen.annotations.OrdinateBaselineBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setBaseordrawingView(DrawingSheetBuilder.SheetBaseordrawingView) - Method in interface nxopen.drawings.DrawingSheetBuilder

License requirements: drafting ("DRAFTING")
.

setBaseOrientation(DrawBeadBuilder.OrientationTypes) - Method in interface nxopen.die.DrawBeadBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setBaseOrientation(ISurface) - Method in interface nxopen.die.DrawDiePunchBuilder

Sets the base orientation of the draw die punch casting.

setBaseOrientation(ISurface) - Method in interface nxopen.die.SteelInsertBuilder

Sets the base orientation of the steelinsert
License requirements: ug_die_design ("Die Design")
.

setBasePanelType(GapFlushnessBuilder.PanelTypes) - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setBasePlane(DatumPlane) - Method in interface nxopen.display.PlanarShipGridBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setBasePlane(ISurface) - Method in interface nxopen.features.SectionCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setBasePlane(Plane) - Method in interface nxopen.features.shipdesign.ExpansionDrawingBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setBasePlane(Plane) - Method in interface nxopen.tooling.DieDesDrawDieBuilder

License requirements: ug_die_design ("Die Design")
.

setBasePlane(Plane) - Method in interface nxopen.tooling.DieDesDrawPunchBuilder

License requirements: ug_die_design ("Die Design")
.

setBasePlane(Plane) - Method in interface nxopen.tooling.DieDesignLowerBinderBuilder

License requirements: ug_die_design ("Die Design")
.

setBasePlane(Plane) - Method in interface nxopen.tooling.DieDesignTrimPostBuilder

License requirements: ug_die_design ("Die Design")
.

setBasePoint(Point) - Method in interface nxopen.MeasureAngleBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setBasePoint(Point) - Method in interface nxopen.mechatronics.LinearLimitJointBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setBasePoint(Point) - Method in interface nxopen.mechatronics.LinearSpringJointBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setBasePoint(Point) - Method in interface nxopen.tooling.BlankLayoutBuilder

License requirements: None.

setBasePointChoice(ImageBaseBuilder.BasePointChoices) - Method in interface nxopen.display.ImageBaseBuilder

License requirements: None.

setBasePointX(double) - Method in interface nxopen.cam.InspectionCylinderFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setBasePointX(double) - Method in interface nxopen.cam.InspectionPlaneFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setBasePointY(double) - Method in interface nxopen.cam.InspectionCylinderFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setBasePointY(double) - Method in interface nxopen.cam.InspectionPlaneFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setBasePointZ(double) - Method in interface nxopen.cam.InspectionCylinderFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setBasePointZ(double) - Method in interface nxopen.cam.InspectionPlaneFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setBaseScalarFieldPropertyValue(String, FieldExpression) - Method in interface nxopen.BasePropertyTable

Sets the field expression FieldExpression value of the property
License requirements: None.

setBaseScalarWithDataPropertyValue(String, double, Unit) - Method in interface nxopen.BasePropertyTable

Sets the the Scalar property as a constant double value with units.

setBaseScalarWithDataPropertyValue(String, String, Unit) - Method in interface nxopen.BasePropertyTable

Sets the the Scalar property as a string value with units.

setBaseSheet(Body) - Method in interface nxopen.features.GlobalShapingBuilder

Base sheet
License requirements: solid_modeling ("SOLIDS MODELING")
.

setBaseString(String) - Method in interface nxopen.InterpartExpressionsBuilder

License requirements: None.

setBaseStyleEnum(ColumnFeatureBuilder.ColumnBaseType) - Method in interface nxopen.linedesigner.ColumnFeatureBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setBaseSurface(Body) - Method in interface nxopen.features.OvercrownBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setBaseThickness(double) - Method in interface nxopen.die.DrawDiePunchSectionBuilder

License requirements: ug_die_design ("Die Design")
.

setBaseThickness(double) - Method in interface nxopen.tooling.DieDesDrawDieBuilder

License requirements: ug_die_design ("Die Design")
.

setBaseThickness(double) - Method in interface nxopen.tooling.DieDesDrawPunchBuilder

License requirements: ug_die_design ("Die Design")
.

setBaseVector(Direction) - Method in interface nxopen.mechatronics.AngularLimitJointBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setBaseVector(Direction) - Method in interface nxopen.mechatronics.AngularSpringJointBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setBaseView(String) - Method in interface nxopen.drawings.ViewCreationWizardBuilder

License requirements: drafting ("DRAFTING")
.

setBaseViewOfViewSet(Tag, UFView.StandardOrientation) - Method in interface nxopen.uf.UFView

Refer to UF_VIEW_set_base_view_of_view_set for documentation.

setBaseWidth(double) - Method in interface nxopen.die.DrawDiePunchSectionBuilder

License requirements: ug_die_design ("Die Design")
.

setBaseWidth(double) - Method in interface nxopen.tooling.DieDesDrawPunchBuilder

License requirements: ug_die_design ("Die Design")
.

setBasicColor(NXColor) - Method in interface nxopen.fields.DisplayPropertiesBuilder

License requirements: None.

setBasicDesignFeature(Feature) - Method in interface nxopen.features.shipdesign.ShipPreparationInfo

License requirements: nx_ship_basic ("Ship Basic Design")
.

setBasicDesignMode(boolean) - Method in interface nxopen.features.shipdesign.ExpansionDrawingBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setBAxis(double) - Method in interface nxopen.cam.AlongMachineAxisMoveBuilder

License requirements: None.

setBboxPoint(Point) - Method in interface nxopen.cae.CfdLocalResolutionConstraintBuilder

License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")
.

setBcBaseName(String) - Method in interface nxopen.cae.AutoBCBuilder

Sets the base name of SimBC objects created
License requirements: None.

setBcLabel(int) - Method in interface nxopen.cae.SimBCBuilder

Sets the label of CAE.SimBC object
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Created in NX7.5.0

setBcName(String) - Method in interface nxopen.cae.SimBCBuilder

Sets the name of CAE.SimBC object
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Created in NX4.0.0

setBcsToPlot(SimBC[]) - Method in interface nxopen.cae.SimBcPlotContoursBuilder

Sets SimBC objects to plot.

setBcsToPlot(SimBC[], String[]) - Method in interface nxopen.cae.SimBcPlotContoursBuilder

Sets SimBC objects and property names to plot .

setBcsToPlot(SimBC[], String[]) - Method in interface nxopen.cae.SimBcXyPlotBuilder

Sets SimBC objects to plot.

setBcsToPlot(SimBC[]) - Method in interface nxopen.cae.SimBcXyPlotBuilder

Sets SimBC objects to plot.

setBcTags(SimBC[]) - Method in interface nxopen.cae.BcLabelManagerBuilder

Sets tags of BC to renumber
License requirements: None.

setBcurveTol(double) - Method in interface nxopen.IgesCreator

License requirements: None.

setBeadLocation(WeldBeadBuilder.BeadLocationMethod) - Method in interface nxopen.weld.WeldBeadBuilder

License requirements: ugweld ("UG WELD")
.

setBeamAftSection(BeamSection) - Method in interface nxopen.cae.BeamSectionOptions

Sets the section of aft beam end
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setBeamDataLocation(ElementalFunctionEvalBeamLocation) - Method in interface nxopen.cae.responsesimulation.ElementalFunctionEvaluationSettingBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setBeamDataLocation(NodalFunctionEvalBeamLocation) - Method in interface nxopen.cae.responsesimulation.NodalFunctionEvaluationSettingBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setBeamElement(int) - Method in interface nxopen.cae.CrossSectionParameters

Set beam element ID
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setBeamEnd(Result.BeamEnd) - Method in interface nxopen.cae.CrossSectionParameters

Set beam end
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setBeamFilletRadius(double) - Method in interface nxopen.cae.ResultMeasureResultAllOptions

Set the beam fillet radius if adding beam fillets for calculation of beam results only
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setBeamFilletRadius(double) - Method in interface nxopen.cae.ResultParameters

Sets the fillet radius as a fraction of the adjacent dimensions
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setBeamFillets(boolean) - Method in interface nxopen.cae.ResultParameters

Sets the fillets flag
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setBeamForeSection(BeamSection) - Method in interface nxopen.cae.BeamSectionOptions

Sets the section of fore beam end
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setBeamLocation(DataLocation.Beam) - Method in interface nxopen.cae.responsesimulation.DataLocation

License requirements: nx_response_anlys ("NX Response Analysis")
.

setBeamResultsInLocalCoordinateSystem(boolean) - Method in interface nxopen.cae.ResultParameters

Presents beam results in local coordinate system (if flag is true) or in the same coordinate system as the rest of the model
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setBeamSect(Result.Section) - Method in interface nxopen.cae.ResultVariable

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setBeamSection(Result.Section) - Method in interface nxopen.cae.ResultMeasureResultAllOptions

Set the beam section for beam stress/strain results
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setBeamSection(Result.Section) - Method in interface nxopen.cae.ResultMeasureResultDirectionSectionOptions

Set the beam section for beam stress/strain results
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setBeamSection(Result.Section) - Method in interface nxopen.cae.ResultMeasureResultSectionOptions

Set the beam section for beam stress/strain results
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setBeamSectionTapered(boolean) - Method in interface nxopen.cae.BeamSectionOptions

Sets the flag indicating whether the beam section is tapered
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setBeamSectionTaperedChaining(boolean) - Method in interface nxopen.cae.BeamSectionOptions

Sets the flag indicating whether the beam section is in tapered chaining
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setBeamStress(DurabilityStressAxesBuilder.BeamStressEnum) - Method in interface nxopen.cae.DurabilityStressAxesBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setBefore(String[]) - Method in interface nxopen.annotations.AppendedTextBuilder

Sets the appended text before the annotation
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setBeforeText(String[]) - Method in interface nxopen.annotations.AppendedText

Sets the appended text before the annotation
License requirements: None.

setBeforeText(String) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder

License requirements: None.

setBeforeTextType(SearchModelViewBuilder.TextComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder

License requirements: None.

setBelow(String[]) - Method in interface nxopen.annotations.AppendedTextBuilder

Sets the appended text below the annotation
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setBelowText(String[]) - Method in interface nxopen.annotations.AppendedText

Sets the appended text below the annotation
License requirements: None.

setBelowText(String) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder

License requirements: None.

setBelowTextType(SearchModelViewBuilder.TextComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder

License requirements: None.

setBeltAlignment(ProfileBuilder.Alignment) - Method in interface nxopen.features.shipdesign.ProfileBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setBeltRouting(SeatBeltAnchorageBuilder.RoutingTypes) - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setBeltSize(int) - Method in interface nxopen.features.shipdesign.ProfileBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setBeltThickness(String) - Method in interface nxopen.die.DrawDiePunchSectionBuilder

License requirements: ug_die_design ("Die Design")
.

setBeltThickness(String) - Method in interface nxopen.die.SteelInsertSectionBuilder

License requirements: ug_die_design ("Die Design")
.

setBeltThickness(String) - Method in interface nxopen.die.SteelInsertSegmentChildBuilder

License requirements: ug_die_design ("Die Design")
.

setBeltThickness(String) - Method in interface nxopen.die.SteelInsertSegmentParentBuilder

License requirements: ug_die_design ("Die Design")
.

setBeltThickness(double) - Method in interface nxopen.tooling.DieDesDrawPunchBuilder

License requirements: ug_die_design ("Die Design")
.

setBeltThickness(double) - Method in interface nxopen.tooling.DieDesignTrimPostBuilder

License requirements: ug_die_design ("Die Design")
.

setBeltType(int) - Method in interface nxopen.features.shipdesign.ProfileBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setBeltWallAttributes(String, String, int) - Method in interface nxopen.die.DrawDiePunchSectionBuilder

Sets the belt wall faces attributes.

setBendAllowanceFormula(boolean, String) - Method in interface nxopen.preferences.PartSheetmetal

SETS the bend allowance formula
License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setBendAndEndSegmentWidthFactor(double) - Method in interface nxopen.drawings.ViewSectionLineBuilder

License requirements: drafting ("DRAFTING")
.

setBendAngle(String) - Method in interface nxopen.features.sheetmetal.BendBuilder

Sets the Bend Angle
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setBendAngle(String) - Method in interface nxopen.features.sheetmetal.FlangeBuilder

Deprecated.

Deprecated in NX10.0.0. Use Expression.setRightHandSide(java.lang.String) on the Expression object returned from FlangeBuilder.bendAngle() instead.

setBendAngle(double) - Method in interface nxopen.mechanicalrouting.EditPointBuilder

License requirements: routing_base ("Routing Basic")
.

setBendAngle1(double) - Method in interface nxopen.tooling.BendOperationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setBendAngle1(double) - Method in interface nxopen.tooling.DirectUnbendBuilder

License requirements: None.

setBendAngle2(double) - Method in interface nxopen.tooling.BendOperationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setBendAngle2(double) - Method in interface nxopen.tooling.DirectUnbendBuilder

License requirements: None.

setBendAngle3(double) - Method in interface nxopen.tooling.BendOperationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setBendAngle3(double) - Method in interface nxopen.tooling.DirectUnbendBuilder

License requirements: None.

setBendAngle4(double) - Method in interface nxopen.tooling.BendOperationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setBendAngle4(double) - Method in interface nxopen.tooling.DirectUnbendBuilder

License requirements: None.

setBendAngle5(double) - Method in interface nxopen.tooling.BendOperationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setBendAngle5(double) - Method in interface nxopen.tooling.DirectUnbendBuilder

License requirements: None.

setBendAngle6(double) - Method in interface nxopen.tooling.DirectUnbendBuilder

License requirements: None.

setBendAngleDirection(FlexibleCableBuilder.BendAngleDirectionOptions) - Method in interface nxopen.features.sheetmetal.FlexibleCableSegment

Sets the bend angle direction.

setBendClosureType(EditCornerBuilder.BendClosureTypeOptions) - Method in interface nxopen.features.sheetmetal.EditCornerBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setBendDefinitionMethodOption(boolean, PartSheetmetal.BendDefinitionMethodOptions) - Method in interface nxopen.preferences.PartSheetmetal

SETS the bend definition method
License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setBendDevelopedLength(double) - Method in interface nxopen.tooling.DefineNeutralFactorBuilder

License requirements: None.

setBendDevLength(double) - Method in interface nxopen.tooling.BendOperationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setBendDevLength(double) - Method in interface nxopen.tooling.DirectUnbendBuilder

License requirements: None.

setBendDown(boolean) - Method in interface nxopen.features.sheetmetal.ExportFlatPatternBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setBendFace(Face) - Method in interface nxopen.features.sheetmetal.MigratedPanelBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setBendFaces(ScCollector) - Method in interface nxopen.features.sheetmetal.AeroJoggleBuilder

License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setBendingArm(double) - Method in interface nxopen.motion.JointFrictionAdams

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using Motion.JointFrictionAdams#bendingArmExpression to query or edit it.

setBendingArm(double) - Method in interface nxopen.motion.JointFrictionRecurDyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using Motion.JointFrictionRecurDyn#bendingArmExpression to query or edit it.

setBendingColor(NXColor) - Method in interface nxopen.tooling.QuickQuotationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setBendingDirection(BendInsertDesignBuilder.BendingDirectionOption) - Method in interface nxopen.tooling.BendInsertDesignBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setBendlines(boolean) - Method in interface nxopen.drawings.SectionViewStyle

Sets the status of bendlines
License requirements: drafting ("DRAFTING")
.

setBendlines(boolean) - Method in interface nxopen.drawings.ViewStyleSectionBuilder

License requirements: drafting ("DRAFTING")
.

setBendlines(boolean) - Method in interface nxopen.preferences.SectionViewPreferences

Sets the status of bendlines
License requirements: drafting ("DRAFTING")
.

setBendLocation(Point) - Method in interface nxopen.drawings.HalfSectionLineBuilder

Deprecated.

Deprecated in NX10.0.0. Use Drawings.SectionViewBuilder#sectionLineSegments instead.

setBendLocation(BendBuilder.BendLocationOptions) - Method in interface nxopen.features.sheetmetal.BendBuilder

Sets the Bend Location (Material Side)
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setBendLocation(JogBuilder.BendLocationOptions) - Method in interface nxopen.features.sheetmetal.JogBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setBendMethod(CornerTypeBuilder.BendMethods) - Method in interface nxopen.routing.BendCorner

Sets the bend method
License requirements: routing_base ("Routing Basic")
.

setBendMoment(boolean) - Method in interface nxopen.motion.JointFrictionAdams

Sets the bend moment
License requirements: mechanisms ("MECHANISMS")
.

setBendMoment(boolean) - Method in interface nxopen.motion.JointFrictionRecurDyn

Sets the bend moment
License requirements: mechanisms ("MECHANISMS")
.

setBendNeutralFactor(double) - Method in interface nxopen.tooling.BendOperationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setBendNeutralFactor(double) - Method in interface nxopen.tooling.DirectUnbendBuilder

License requirements: None.

setBendNumPrebends(BendOperationBuilder.Prebend) - Method in interface nxopen.tooling.BendOperationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setBendNumPrebends(DirectUnfoldBuilder.Bend) - Method in interface nxopen.tooling.DirectUnbendBuilder

License requirements: None.

setBendRadius(String) - Method in interface nxopen.features.sheetmetal.BendOptions

Deprecated.

Deprecated in NX10.0.0. Use Expression.setRightHandSide(java.lang.String) on the Expression object returned from Features.SheetMetal.BendOptions#bendRadius instead.

setBendRadius(String) - Method in interface nxopen.features.sheetmetal.MigratedPanelBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setBendRadius(boolean, String) - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign

Sets the bend radius value
License requirements: nx_flexible_pcb ("NX Flexible PCB")
.

setBendRadius(boolean, String) - Method in interface nxopen.preferences.PartSheetmetal

The bend radius value
License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setBendRadius(double) - Method in interface nxopen.preferences.RoutingPath

Needs a work part and a loaded applicaiton view.

setBendRadius(double) - Method in interface nxopen.routing.BendCorner

Sets the bend radius of the corner.

setBendRadius(double) - Method in interface nxopen.routing.MiteredBendCorner

Sets the bend radius of the corner.

setBendRadius(double) - Method in interface nxopen.routing.OffsetPath

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setBendRadiusMethod(RoutingPath.RadiusMethod) - Method in interface nxopen.preferences.RoutingPath

Set whether the default corner should use bend ratio.

setBendRadiusUnits(RoutingPath.RadiusUnits) - Method in interface nxopen.preferences.RoutingPath

License requirements: routing_base ("Routing Basic")
.

setBendRatio(double) - Method in interface nxopen.preferences.RoutingPath

License requirements: routing_base ("Routing Basic")
.

setBendRatio(double) - Method in interface nxopen.routing.BendCorner

Sets the bend ratio to apply when computing the bend radius
License requirements: routing_base ("Routing Basic")
.

setBendRatio(double) - Method in interface nxopen.routing.OffsetPath

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setBendReliefDepth(String) - Method in interface nxopen.features.sheetmetal.BendOptions

Deprecated.

Deprecated in NX10.0.0. Use Expression.setRightHandSide(java.lang.String) on the Expression object returned from Features.SheetMetal.BendOptions#bendReliefDepth instead.

setBendReliefDepth(String) - Method in interface nxopen.features.sheetmetal.ConvertToSheetmetalBuilder

Deprecated.

Deprecated in NX10.0.0. Use Expression.setRightHandSide(java.lang.String) on the Expression object returned from Features.SheetMetal.ConvertToSheetmetalBuilder#bendReliefDepth instead.

setBendReliefDepth(boolean, String) - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign

Sets the bend relief depth value
License requirements: nx_flexible_pcb ("NX Flexible PCB")
.

setBendReliefDepth(boolean, String) - Method in interface nxopen.preferences.PartSheetmetal

THE bend relief depth value
License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setBendReliefType(BendOptions.BendReliefTypeOptions) - Method in interface nxopen.features.sheetmetal.BendOptions

Sets the bend relief type.

setBendReliefType(ConvertToSheetmetalBuilder.BendReliefTypeOptions) - Method in interface nxopen.features.sheetmetal.ConvertToSheetmetalBuilder

Sets the bend relief type.

setBendReliefType(HemFlangeBuilder.BendReliefOptions) - Method in interface nxopen.features.sheetmetal.HemFlangeBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setBendReliefType(ResizeBendRadiusBuilder.BendReliefTypeOptions) - Method in interface nxopen.features.sheetmetal.ResizeBendRadiusBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setBendReliefWidth(String) - Method in interface nxopen.features.sheetmetal.BendOptions

Deprecated.

Deprecated in NX10.0.0. Use Expression.setRightHandSide(java.lang.String) on the Expression object returned from Features.SheetMetal.BendOptions#bendReliefWidth instead.

setBendReliefWidth(String) - Method in interface nxopen.features.sheetmetal.ConvertToSheetmetalBuilder

Deprecated.

Deprecated in NX10.0.0. Use Expression.setRightHandSide(java.lang.String) on the Expression object returned from Features.SheetMetal.ConvertToSheetmetalBuilder#bendReliefWidth instead.

setBendReliefWidth(boolean, String) - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign

Sets the bend relief depth value
License requirements: nx_flexible_pcb ("NX Flexible PCB")
.

setBendReliefWidth(boolean, String) - Method in interface nxopen.preferences.PartSheetmetal

THE bend relief depth value
License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setBendTable(String) - Method in interface nxopen.mechanicalrouting.BendCornerTypeBuilder

Sets the name of bend radius table
License requirements: routing_base ("Routing Basic")
.

setBendTable(boolean, String) - Method in interface nxopen.preferences.PartSheetmetal

SETS the bend table name
License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setBendTable(String) - Method in interface nxopen.preferences.RoutingPath

License requirements: routing_base ("Routing Basic")
.

setBendTangent(boolean) - Method in interface nxopen.features.sheetmetal.ExportFlatPatternBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setBendTaperInputMethod1(BendTaperBuilder.BendTaperInputMethod) - Method in interface nxopen.features.sheetmetal.BendTaperBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setBendTaperInputMethod2(BendTaperBuilder.BendTaperInputMethod) - Method in interface nxopen.features.sheetmetal.BendTaperBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setBendTaperType1(BendTaperBuilder.BendTaperType) - Method in interface nxopen.features.sheetmetal.BendTaperBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setBendTaperType2(BendTaperBuilder.BendTaperType) - Method in interface nxopen.features.sheetmetal.BendTaperBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setBendType(BendInsertDesignBuilder.BendTypeOption) - Method in interface nxopen.tooling.BendInsertDesignBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setBendType(UniversalUnformBuilder.BendTypes) - Method in interface nxopen.tooling.UniversalUnformBuilder

License requirements: None.

setBendUp(boolean) - Method in interface nxopen.features.sheetmetal.ExportFlatPatternBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setBezier(boolean) - Method in interface nxopen.features.AestheticFaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setBgdBottomRgbcolorPicker(double[]) - Method in interface nxopen.display.TrueShadingBuilder

Sets the RGB values of background bottom color picker
License requirements: None.

setBgdImageEnum(TrueShadingBuilder.BgdImageType) - Method in interface nxopen.display.TrueShadingBuilder

License requirements: None.

setBgdImageFileBrowser(String) - Method in interface nxopen.display.TrueShadingBuilder

License requirements: None.

setBgdTopRgbcolorPicker(double[]) - Method in interface nxopen.display.TrueShadingBuilder

Sets the RGB values of background top color picker
License requirements: None.

setBgdTypeEnum(TrueShadingBuilder.BgdType) - Method in interface nxopen.display.TrueShadingBuilder

License requirements: None.

setBiaxialityRatioHistory(boolean) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setBinderEdge(DirectionOption, IProfile[]) - Method in interface nxopen.die.DeckParentBuilder

Sets the binder edge profile of the upper draw die deck.

setBinderEdgeOffset(double) - Method in interface nxopen.tooling.DieDesDrawDieBuilder

License requirements: ug_die_design ("Die Design")
.

setBinderPosition(double) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setBinderRelief(double) - Method in interface nxopen.tooling.DieDesignLowerBinderBuilder

License requirements: ug_die_design ("Die Design")
.

setBitmap(String) - Method in interface nxopen.blockstyler.BodyCollector

License requirements: None.

setBitmap(String) - Method in interface nxopen.blockstyler.Button

License requirements: None.

setBitmap(String) - Method in interface nxopen.blockstyler.CurveCollector

License requirements: None.

setBitmap(String) - Method in interface nxopen.blockstyler.DoubleBlock

License requirements: None.

setBitmap(String) - Method in interface nxopen.blockstyler.FaceCollector

License requirements: None.

setBitmap(String) - Method in interface nxopen.blockstyler.IntegerBlock

License requirements: None.

setBitmap(String) - Method in interface nxopen.blockstyler.Label

License requirements: None.

setBitmap(String) - Method in interface nxopen.blockstyler.SectionBuilder

License requirements: None.

setBitmap(String) - Method in interface nxopen.blockstyler.SelectElement

License requirements: None.

setBitmap(String) - Method in interface nxopen.blockstyler.SelectNode

License requirements: None.

setBitmap(String) - Method in interface nxopen.blockstyler.SelectObject

License requirements: None.

setBitmap(String) - Method in interface nxopen.blockstyler.StringBlock

License requirements: None.

setBitmap(String) - Method in interface nxopen.blockstyler.SuperPoint

License requirements: None.

setBitmap(String) - Method in interface nxopen.blockstyler.SuperSection

License requirements: None.

setBitmap(String) - Method in interface nxopen.blockstyler.Toggle

License requirements: None.

setBitmap(String) - Method in interface nxopen.uistyler.BitMap

Sets the bitmap filename.

setBitmap(String) - Method in interface nxopen.uistyler.IntegerItem

Specifies a filename that contains a bitmap definition.

setBitmap(String) - Method in interface nxopen.uistyler.LabelItem

Specifies a filename that contains a bitmap definition.

setBitmap(String[]) - Method in interface nxopen.uistyler.OptionMenu

Set an array of bitmap filenames
License requirements: None.

setBitmap(String) - Method in interface nxopen.uistyler.PushButton

Specifies a filename that contains a bitmap definition.

setBitmap(String) - Method in interface nxopen.uistyler.RealItem

License requirements: None.

setBitmap(String) - Method in interface nxopen.uistyler.StringItem

Specifies a filename that contains a bitmap definition.

setBitmapName(String) - Method in interface nxopen.visualreporting.GroupLabel

License requirements: nx_visual_reporting ("Visual Reporting")
.

setBitmapName(String) - Method in interface nxopen.visualreporting.Property

License requirements: nx_visual_reporting ("Visual Reporting")
.

setBitmapName(String) - Method in interface nxopen.visualreporting.ResultCategory

License requirements: nx_visual_reporting ("Visual Reporting")
.

setBitmapName(String) - Method in interface nxopen.visualreporting.VisualReport

License requirements: nx_visual_reporting ("Visual Reporting")
.

setBitmapNameOfGroupLabel(GroupLabel, String) - Method in interface nxopen.visualreporting.VisualReportBuilder

Sets the bitmap of the given GroupLabel .

setBitmapNameOfReport(String) - Method in interface nxopen.visualreporting.VisualReportBuilder

License requirements: None.

setBitmapNameOfReportingProperty(String) - Method in interface nxopen.visualreporting.VisualReportBuilder

License requirements: None.

setBitmapOnly(boolean) - Method in interface nxopen.blockstyler.Toggle

License requirements: None.

setBitmaps(String[]) - Method in interface nxopen.blockstyler.Enumeration

Sets the Bitmaps
License requirements: None.

setBitmaps(String[]) - Method in interface nxopen.uistyler.OptionToggle

Set bitmaps
License requirements: None.

setBits(String, int) - Method in interface nxopen.blockstyler.PropertyList

Sets the bits value for the given property name.

setBits(String, int) - Method in interface nxopen.PropertyContainer

Sets the bits value for the given property name.

setBlackoutPointsColor(NXColor) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setBladeBlendColor(NXColor) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setBladeCleanupPasses(boolean) - Method in interface nxopen.cam.BladeRough

License requirements: cam_base ("CAM BASE")
.

setBladeColor(NXColor) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setBladeEdgePoint(BladeEdge.EdgePointType) - Method in interface nxopen.cam.BladeEdge

License requirements: cam_base ("CAM BASE")
.

setBlankArea(double) - Method in interface nxopen.tooling.BlankNestingBuilder

License requirements: None.

setBlankBody(boolean) - Method in interface nxopen.tooling.ValidCheckBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setBlankColor(NXColor) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setBlankContourNoLevels(int) - Method in interface nxopen.cam.StepoverBuilder

License requirements: cam_base ("CAM BASE")
.

setBlankDefinitionType(GeometryGroup.BlankDefinitionTypes) - Method in interface nxopen.cam.GeometryGroup

License requirements: cam_base ("CAM BASE")
.

setBlankDiameter(CylinderMillingBuilder.BlankDiameterTypes) - Method in interface nxopen.cam.CylinderMillingBuilder

License requirements: cam_base ("CAM BASE")
.

setBlankMatrix(Matrix3x3) - Method in interface nxopen.tooling.ElectrodeBlankBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setBlankNameStr(String) - Method in interface nxopen.tooling.BlankLayoutBuilder

License requirements: None.

setBlankNumber(String) - Method in interface nxopen.tooling.BlankGeneratorBuilder

License requirements: None.

setBlankOption(boolean) - Method in interface nxopen.features.DividefaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setBlankOptionType(LsdynaGeometryPreparationBuilder.BlankOption) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setBlankOriginal(boolean) - Method in interface nxopen.features.WaveLinkBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setBlankPart(TaggedObject) - Method in interface nxopen.tooling.BlankGeneratorBuilder

License requirements: None.

setBlankPosition(BendInsertDesignBuilder.BlankPositions) - Method in interface nxopen.tooling.BendInsertDesignBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setBlankPosition(FormingInsertBuilder.BlankPositions) - Method in interface nxopen.tooling.FormingInsertBuilder

License requirements: None.

setBlankPositionType(LsdynaGeometryPreparationBuilder.BlankPosition) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setBlankPositionValue(double) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setBlankPrecisionValue(double) - Method in interface nxopen.tooling.StockSizeBuilder

License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setBlankProfileOffset(double) - Method in interface nxopen.tooling.DieDesignLowerBinderBuilder

License requirements: ug_die_design ("Die Design")
.

setBlankSelection(Preferences.BlankSelectionTypes) - Method in interface nxopen.cam.Preferences

Deprecated.

Deprecated in NX8.0.0. Use CAM.Preferences#getSelection and CAM.Preferences#setSelection instead.

setBlankSize(double) - Method in interface nxopen.tooling.QuickQuotationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setBlankSize(String) - Method in interface nxopen.tooling.StockSizeBuilder

License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setBlankStatus(Tag, int) - Method in interface nxopen.uf.UFObj

Refer to UF_OBJ_set_blank_status for documentation.

setBlankThickness(double) - Method in interface nxopen.bodydes.OnestepUnformBuilder

Sets the blank thickness.

setBlankThickness(double) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setBlankType(BoundaryTurnBlank.Type) - Method in interface nxopen.cam.BoundaryTurnBlank

License requirements: cam_base ("CAM BASE")
.

setBlankType(FormingInsertBuilder.BlankTypes) - Method in interface nxopen.tooling.FormingInsertBuilder

License requirements: None.

setBlBodySelectionToggle(boolean) - Method in interface nxopen.cae.MeshControlBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setBlendColor(double[]) - Method in interface nxopen.facet.DetectPrimitivesBuilder

Sets the blend color
License requirements: None.

setBlendCurveOption(BlendCurve3DBuilder.BlendCurveOptions) - Method in interface nxopen.tooling.BlendCurve3DBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING")
.

setBlendEnabled(boolean) - Method in interface nxopen.features.MatchEdgeBuilder

License requirements: features_modeling ("FEATURES MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setBlendExtended(boolean) - Method in interface nxopen.features.StyledBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setBlendFaceContinuity(EdgeBlendBuilder.FaceContinuity) - Method in interface nxopen.features.EdgeBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setBlendFaces(NXObject[]) - Method in interface nxopen.cam.Splitter

Set the blend faces
License requirements: cam_base ("CAM BASE")
.

setBlendFacesOption(AestheticFaceBlendBuilder.BlendFacesType) - Method in interface nxopen.features.AestheticFaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setBlendingFunctionType(ScalingMethodBuilder.BlendingFunctionTypes) - Method in interface nxopen.geometricutilities.ScalingMethodBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setBlendMiter(boolean) - Method in interface nxopen.features.sheetmetal.ClosedCornerBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setBlendMiter(boolean) - Method in interface nxopen.features.sheetmetal.MiterOptions

License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setBlendMiter(boolean) - Method in interface nxopen.features.sheetmetal.ThreeBendCornerBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setBlendOption(AestheticFaceBlendBuilder.BlendType) - Method in interface nxopen.features.AestheticFaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setBlendOrder(EdgeBlendBuilder.OrderOfBlending) - Method in interface nxopen.features.EdgeBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setBlendRadius(double) - Method in interface nxopen.features.shipdesign.PlateDivideBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setBlendRadius(double) - Method in interface nxopen.features.shipdesign.ShipPreparationBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setBlendRadius(double) - Method in interface nxopen.features.shipdesign.ShipPreparationInfo

License requirements: nx_ship_basic ("Ship Basic Design")
.

setBlendType(FaceBlendBuilder.Type) - Method in interface nxopen.features.FaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setBlendVirtualCurveOverlay(boolean) - Method in interface nxopen.blockstyler.BodyCollector

License requirements: None.

setBlendVirtualCurveOverlay(boolean) - Method in interface nxopen.blockstyler.CurveCollector

License requirements: None.

setBlendVirtualCurveOverlay(boolean) - Method in interface nxopen.blockstyler.FaceCollector

License requirements: None.

setBlendVirtualCurveOverlay(boolean) - Method in interface nxopen.blockstyler.SectionBuilder

License requirements: None.

setBlendVirtualCurveOverlay(boolean) - Method in interface nxopen.blockstyler.SelectFeature

License requirements: None.

setBlendVirtualCurveOverlay(boolean) - Method in interface nxopen.blockstyler.SelectObject

License requirements: None.

setBlendVirtualCurveOverlay(boolean) - Method in interface nxopen.blockstyler.SuperPoint

License requirements: None.

setBlendVirtualCurveOverlay(boolean) - Method in interface nxopen.blockstyler.SuperSection

License requirements: None.

setBlendWidthMethod(FaceBlendBuilder.WidthMethod) - Method in interface nxopen.features.FaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setBlindHole(int, boolean) - Method in interface nxopen.tooling.FastenerAssy

Sets the blind hole for the hole in the fastener assembly
License requirements: None.

setBlindHoles(boolean) - Method in interface nxopen.annotations.HoleTableSettingsHoleFiltersBuilder

License requirements: drafting ("DRAFTING")
.

setBlockOffset(double) - Method in interface nxopen.features.TabNoteCfgBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setBlockType(WorkpieceBuilder.WorkPieceType) - Method in interface nxopen.tooling.WorkpieceBuilder

License requirements: None.

setBndAddPasses(int) - Method in interface nxopen.cam.DmBndBuilder

License requirements: None.

setBndCustomStart(DmBndBuilder.BndCustomStartTypes) - Method in interface nxopen.cam.DmBndBuilder

License requirements: None.

setBndCutPattern(DmBndBuilder.BndCutPatternTypes) - Method in interface nxopen.cam.DmBndBuilder

Sets the Cut Pattern
License requirements: None.

setBndCutTraversal(DmBndBuilder.BndCutTraversalTypes) - Method in interface nxopen.cam.DmBndBuilder

Sets the Cut Traversal
License requirements: None.

setBndPocketDir(DmBndBuilder.BndPocketDirTypes) - Method in interface nxopen.cam.DmBndBuilder

License requirements: None.

setBndProfilePass(boolean) - Method in interface nxopen.cam.DmBndBuilder

License requirements: None.

setBndProfilePassStock(double) - Method in interface nxopen.cam.DmBndBuilder

License requirements: None.

setBodies(CAEBody[]) - Method in interface nxopen.cae.AutoPairs

Set the list of CAEBody
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Created in NX5.0.0

setBodies(int[]) - Method in interface nxopen.features.CustomFeatureCreateFeatureGeometryEvent

A method to set parasolid bodies of custom feature
License requirements: solid_modeling ("SOLIDS MODELING")
.

setBody(Body) - Method in interface nxopen.features.ShellBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setBody(Body) - Method in interface nxopen.RegionPoint

License requirements: solid_modeling ("SOLIDS MODELING")
.

setBodyBeingPainted(DisplayableObject) - Method in interface nxopen.facet.PaintBrushBuilder

Sets facet body being painted.

setBodyColor(NXColor) - Method in interface nxopen.tooling.EdgePatchBuilder

License requirements: None.

setBodyColor(double, double, double) - Method in interface nxopen.tooling.EdgePatchBuilder

Deprecated.

Deprecated in NX8.5.0. Use Tooling.EdgePatchBuilder#setBodyColor instead.

setBodyColor(NXColor) - Method in interface nxopen.tooling.EnlargeSurfaceBuilder

License requirements: None.

setBodyColor(NXColor) - Method in interface nxopen.tooling.TrimRegionBuilder

License requirements: None.

setBodyDensity(Tag, UFModl.DensityUnits, double) - Method in interface nxopen.uf.UFModeling

Refer to UF_MODL_set_body_density for documentation.

setBodyOutput(VarOffsetFaceBuilder.Output) - Method in interface nxopen.features.VarOffsetFaceBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setBodyOutputOption(ExtendSheetBuilder.BodyOutput) - Method in interface nxopen.features.ExtendSheetBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setBodyOutputOption(ExtendSheetBuilder.BodyOutput) - Method in interface nxopen.features.TrimAndExtendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setBodyParts(HumanData.InverseKinematicsBodyParts) - Method in interface nxopen.features.HumanBuilder

License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setBodyPoint(Point) - Method in interface nxopen.motion.TireBuilder

License requirements: mechanisms ("MECHANISMS")
.

setBodyPreference(FeatureOptions) - Method in interface nxopen.features.RuledBuilder

License requirements: features_modeling ("FEATURES MODELING") OR nx_freeform_1 ("basic freeform modeling")
.

setBodyPreference(ThroughCurveMeshBuilder.BodyPreferenceTypes) - Method in interface nxopen.features.ThroughCurveMeshBuilder

License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

setBodyPreference(ThroughCurvesBuilder.BodyPreferenceTypes) - Method in interface nxopen.features.ThroughCurvesBuilder

License requirements: features_modeling ("FEATURES MODELING") OR nx_freeform_1 ("basic freeform modeling")
.

setBodyReverseDirection(boolean) - Method in interface nxopen.features.ExtractFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setBodyRules(int) - Method in interface nxopen.blockstyler.BodyCollector

License requirements: None.

setBodySiteDisplayFlag(HumanData.EditDisplayBodyParts, boolean) - Method in interface nxopen.features.HumanBuilder

Set the default body parts site CSYS display flag.

setBodyToDelete(ScCollector) - Method in interface nxopen.features.DeleteBodyBuilder

License requirements: None.

setBodyToKeep(ScCollector) - Method in interface nxopen.features.DeleteBodyBuilder

License requirements: None.

setBodyType(FeatureOptions.BodyStyle) - Method in interface nxopen.geometricutilities.FeatureOptions

License requirements: solid_modeling ("SOLIDS MODELING")
.

setBodyType(SessionModeling.BodyTypeOption) - Method in interface nxopen.preferences.SessionModeling

Sets the body type.

setBodyTypePref(int) - Method in interface nxopen.uf.UFModeling

Refer to UF_MODL_set_body_type_pref for documentation.

setBodyTypePreference(SectionSurfaceBuilderEx.BodyType) - Method in interface nxopen.features.SectionSurfaceBuilderEx

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setBodyVector(Direction) - Method in interface nxopen.motion.TireBuilder

License requirements: mechanisms ("MECHANISMS")
.

setBodyWidth(double) - Method in interface nxopen.features.vehicledesign.BaseDataBuilder

Deprecated.

Deprecated in NX9.0.1. Obtain the expression using BaseDataBuilder.bodyWidthExp() to query or edit it.

setBoltHoleCenterlineColor(NXColor) - Method in interface nxopen.cae.MeshCollectorDisplayDefaults2d

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setBoltHoleCenterlineColor(NXColor) - Method in interface nxopen.cae.MeshDisplaySettings2d

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setBoltLoadSequence(NXObject[]) - Method in interface nxopen.cae.SimBcGroup

Set the bolt load sequence
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setBomDetailLevelFlag(RoutingPart.DetailLevel) - Method in interface nxopen.preferences.RoutingPart

Sets the detail level for the Routing bill of material.

setBomFormatPart(String) - Method in interface nxopen.preferences.RoutingPart

Sets the name of the template Routing bill of material part file.

setBomListType(BomListBuilder.BomListTypes) - Method in interface nxopen.tooling.BomListBuilder

License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setBomTemplate(String) - Method in interface nxopen.tooling.BomListBuilder

License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setBookmarkComponentsToLoad(boolean, boolean, LoadOptions.BookmarkComponents) - Method in interface nxopen.LoadOptions

License requirements: None.

setBookmarkRefsetLoadBehavior(LoadOptions.BookmarkRefsets) - Method in interface nxopen.LoadOptions

Sets the options that specify import and loading of components' reference sets when opening bookmarks.

setBoolean(int, int, boolean) - Method in interface nxopen.ITableEditorDataProvider

Sets boolean data at a particular location in the table.

setBoolean(int[], int, boolean) - Method in interface nxopen.ITableEditorDataProvider

Sets boolean data on a range of table cells in a specified column.

setBoolean(UFVariant, String, boolean) - Method in interface nxopen.uf.UFUde

Refer to UF_UDE_set_boolean for documentation.

setBooleanFaceProperties(SessionModeling.BooleanFacePropertiesInheritance) - Method in interface nxopen.preferences.SessionModeling

Sets the boolean face properties inheritance.

setBooleanOperationAndBody(BooleanOperation.BooleanType, Body) - Method in interface nxopen.geometricutilities.BooleanOperation

Deprecated.

Deprecated in NX4.0.0. Use GeometricUtilities.BooleanOperation#setType and GeometricUtilities.BooleanOperation#setTargetBodies instead.

setBooleanOperationAndTarget(Feature.BooleanType, Body) - Method in interface nxopen.features.BlockFeatureBuilder

Set the boolean operation for creating the block and the boolean operation target body
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setBooleanOptions(DieBooleanBuilder.BooleanType) - Method in interface nxopen.die.DieBooleanBuilder

License requirements: ug_die_design ("Die Design")
.

setBooleanPropertyValue(String, boolean) - Method in interface nxopen.BasePropertyTable

Sets the boolean value of the property
License requirements: None.

setBooleanType(Feature.BooleanType) - Method in interface nxopen.features.BlockFeatureBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setBooleanUserAttribute(String, int, boolean, Update.Option) - Method in interface nxopen.NXObject

Creates or modifies a boolean attribute with the option to update or not.

setBooleanValue(AttributePropertiesBaseBuilder.BooleanValueOptions) - Method in interface nxopen.AttributePropertiesBaseBuilder

License requirements: None.

setBooleanValue(String, boolean) - Method in interface nxopen.cam.CAMObject

Set a boolean value to the parameter index for the object.

setBooleanValue(String, boolean) - Method in interface nxopen.cam.Cycle

Set the boolean value of the parameter
License requirements: cam_base ("CAM BASE")
.

setBooleanValue(boolean) - Method in interface nxopen.cam.UdeParameter

License requirements: cam_base ("CAM BASE")
.

setBoolUserAttribute(Tag, String, int, boolean, boolean) - Method in interface nxopen.uf.UFAttr

Refer to UF_ATTR_set_bool_user_attribute for documentation.

setBoolValue(boolean) - Method in interface nxopen.cam.CAMAttribute

Set the feature attribute boolean value for a boolean type attribute
License requirements: cam_base ("CAM BASE"), cam_base ("CAM BASE")
.

setBoolValue(Expression) - Method in interface nxopen.mechatronics.ProxyObjectParameterBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setBorder(boolean) - Method in interface nxopen.cae.optimization.TBSSmoothBuilder

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setBorderAndZoneStandard(int) - Method in interface nxopen.drawings.BorderAndZoneStyleBuilder

License requirements: None.

setBorderColor(int) - Method in interface nxopen.annotations.TableCellStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setBorderColor(NXColor) - Method in interface nxopen.drawings.ViewWorkflowBuilder

License requirements: drafting ("DRAFTING")
.

setBorderColor(int) - Method in interface nxopen.preferences.PartDrafting

Sets the drafting view border color.

setBorderColor(int) - Method in interface nxopen.uf.UFDraw

Refer to UF_DRAW_set_border_color for documentation.

setBorderDisplay(boolean) - Method in interface nxopen.uf.UFDraw

Refer to UF_DRAW_set_border_display for documentation.

setBorderFont(int) - Method in interface nxopen.annotations.TableCellStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setBorderInfo(TaggedObject[], int[], int[]) - Method in interface nxopen.bodydes.OnestepUnformBuilder

Sets the boundary condition information.

setBorderLineWidth(double) - Method in interface nxopen.drawings.SheetBorderSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setBorderLocation(TableCellStyleBuilder.BorderLocationType) - Method in interface nxopen.annotations.TableCellStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setBorderOffset(double) - Method in interface nxopen.annotations.TableSectionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setBordersAndZones(BordersAndZones) - Method in interface nxopen.drawings.DrawingSheet

License requirements: drafting ("DRAFTING")
.

setBorderToArrowDistance(double) - Method in interface nxopen.drawings.SectionLineStyleBuilder

Deprecated.

Deprecated in NX10.0.0. Use ViewSectionLineBuilder.setBorderToArrowDistance(double) instead.

setBorderToArrowDistance(double) - Method in interface nxopen.drawings.ViewSectionLineBuilder

License requirements: drafting ("DRAFTING")
.

setBorderTypeItems(FillHoleBuilder.BorderContinuity[]) - Method in interface nxopen.features.FillHoleBuilder

Sets array of continuity items
License requirements: None.

setBorderVisibility(boolean) - Method in interface nxopen.blockstyler.Enumeration

License requirements: None.

setBorderWidth(int) - Method in interface nxopen.annotations.TableCellStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setBossDimension(double) - Method in interface nxopen.cam.ProbeInspectBorebossMoveBuilder

License requirements: None.

setBothFilletLengths(JointExitBuilder.FilletSizes) - Method in interface nxopen.weld.JointExitBuilder

Sets the symmetric fillet weld values for a welding joint.

setBottom(IOrientation) - Method in interface nxopen.die.RibChildBuilder

Sets the bottom limit geometry of the die rib.

setBottom(double) - Method in interface nxopen.tooling.BlankLayoutBuilder

License requirements: None.

setBottomColor(double[]) - Method in interface nxopen.display.Background

Sets the bottom color
License requirements: None.

setBottomCorner(Point3d) - Method in interface nxopen.assemblies.BoxSearchTermBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setBottomEnd(IOrientation) - Method in interface nxopen.die.RibChildBuilder

Sets the bottom end limit geometry of the die rib.

setBottomEndByProfile(DirectionOption, IProfile[]) - Method in interface nxopen.die.RibChildBuilder

Sets the bottom end limit geometry of the die rib using a profile.

setBottomExtension(WeldGrooveExtension) - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. This functionality is no longer supported.

setBottomHorizontalOffset(double) - Method in interface nxopen.die.RibChildBuilder

Sets the bottom horizontal offset of the die rib.

setBottomHorizontalOffset(double) - Method in interface nxopen.die.RibParentBuilder

Sets the bottom horizontal offset of die ribs.

setBottomLimitOffset(double) - Method in interface nxopen.die.RibChildBuilder

Sets the bottom limit offset of the die rib.

setBottomLimitOffset(double) - Method in interface nxopen.die.RibParentBuilder

Sets the bottom limit offset of die ribs.

setBottomMargin(double) - Method in interface nxopen.drawings.BordersAndZonesBuilder

Deprecated.

Deprecated in NX10.0.0. Use SheetMarginSettingsBuilder.bottomTrimmedMargin() instead.

setBottomPlateClearance(double) - Method in interface nxopen.tooling.BendInsertDesignBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setBottomPlateClearance(double) - Method in interface nxopen.tooling.FormingInsertBuilder

License requirements: None.

setBottomPlateClearance(double) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder

License requirements: None.

setBottomShapeControlMethods(StyledCornerBuilder.ShapeControlMethodsTypes) - Method in interface nxopen.features.StyledCornerBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setBottomTrimmedMargin(double) - Method in interface nxopen.drawings.SheetMarginSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setBottomUntrimmedMargin(double) - Method in interface nxopen.drawings.SheetMarginSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setBottomVerticalOffset(double) - Method in interface nxopen.die.RibChildBuilder

Sets the bottom vertical offset of the die rib.

setBottomVerticalOffset(double) - Method in interface nxopen.die.RibParentBuilder

Sets the bottom vertical offset of die ribs.

setBottomView(boolean) - Method in interface nxopen.drawings.ViewCreationWizardBuilder

License requirements: drafting ("DRAFTING")
.

setBoundary(boolean) - Method in interface nxopen.features.FitSurfaceBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setBoundary1Plane(Plane) - Method in interface nxopen.features.shipdesign.ProfileSystemBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setBoundary2Plane(Plane) - Method in interface nxopen.features.shipdesign.ProfileSystemBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setBoundaryApproximation(boolean) - Method in interface nxopen.cam.MillCutParameters

License requirements: cam_base ("CAM BASE")
.

setBoundaryAssoc(Tag) - Method in interface nxopen.uf.UFDraw

Refer to UF_DRAW_set_boundary_assoc for documentation.

SetBoundaryAssocData() - Constructor for class nxopen.uf.UFDraw.SetBoundaryAssocData

setBoundaryBody(Body) - Method in interface nxopen.tooling.CoolingDefineChannelBuilder

Sets the boundary body to do channel extension
License requirements: None.

setBoundaryChannelExtension(double) - Method in interface nxopen.tooling.CoolingExtendBuilder

License requirements: None.

setBoundaryFacesColor(NXColor) - Method in interface nxopen.tooling.MWSearchRegionBuilder

License requirements: None.

setBoundaryFacetTreatmentType(SnipFacetBodyBuilder.BoundaryFacetTreatmentMethod) - Method in interface nxopen.facet.SnipFacetBodyBuilder

License requirements: None.

setBoundaryInTol(double) - Method in interface nxopen.cam.MillCutParameters

License requirements: cam_base ("CAM BASE")
.

setBoundaryLayerSize(int) - Method in interface nxopen.cae.MeshControlDisplayOptionsBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setBoundaryMethod(WeldFillBuilder.BoundaryMethodType) - Method in interface nxopen.weld.WeldFillBuilder

License requirements: ugweld ("UG WELD")
.

setBoundaryOnePoints(Point3d[]) - Method in interface nxopen.features.shipdesign.ProfileSystemBuilder

Sets the selected intersection points for the first boundary.

setBoundaryOptions(AssignNodalCSBuilder.GeometryOption) - Method in interface nxopen.cae.AssignNodalCSBuilder

License requirements: None.

setBoundaryOutTol(double) - Method in interface nxopen.cam.MillCutParameters

License requirements: cam_base ("CAM BASE")
.

setBoundaryPlane(Plane) - Method in interface nxopen.features.shipdesign.PlateSystemBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setBoundaryPlane(UFVariant, double[], double[]) - Method in interface nxopen.uf.UFCambnd

Refer to UF_CAMBND_set_boundary_plane for documentation.

setBoundaryPoint1(Point) - Method in interface nxopen.drawings.DetailViewBuilder

License requirements: drafting ("DRAFTING")
.

setBoundaryPoint1(Point) - Method in interface nxopen.drawings.RefineDisplayBuilder

License requirements: drafting ("DRAFTING")
.

setBoundaryPoint1(Point) - Method in interface nxopen.drawings.ViewBoundaryBuilder

License requirements: nx_layout ("NX Layout")
.

setBoundaryPoint2(Point) - Method in interface nxopen.drawings.DetailViewBuilder

License requirements: drafting ("DRAFTING")
.

setBoundaryPoint2(Point) - Method in interface nxopen.drawings.RefineDisplayBuilder

License requirements: drafting ("DRAFTING")
.

setBoundaryPoint2(Point) - Method in interface nxopen.drawings.ViewBoundaryBuilder

License requirements: nx_layout ("NX Layout")
.

setBoundaryReverse(boolean) - Method in interface nxopen.features.shipdesign.ProfileSystemBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setBoundarySection(Section) - Method in interface nxopen.features.OvercrownBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setBoundarySegment(int) - Method in interface nxopen.tooling.BlankNestingBuilder

License requirements: None.

setBoundaryStatus(boolean) - Method in interface nxopen.drawings.GeneralViewStyle

Sets the boundary status.

setBoundaryStatus(boolean) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder

License requirements: drafting ("DRAFTING")
.

setBoundaryStatus(boolean) - Method in interface nxopen.preferences.GeneralViewPreferences

Sets the boundary status.

setBoundaryStock(double) - Method in interface nxopen.cam.MillCutParameters

License requirements: cam_base ("CAM BASE")
.

setBoundaryTwoPoints(Point3d[]) - Method in interface nxopen.features.shipdesign.ProfileSystemBuilder

Set the selected intersection points for the second boundary.

setBoundaryType(BoundarySet.BoundaryTypes) - Method in interface nxopen.cam.BoundarySet

License requirements: cam_base ("CAM BASE")
.

setBoundaryType(ViewBoundaryBuilder.Type) - Method in interface nxopen.drawings.ViewBoundaryBuilder

License requirements: nx_layout ("NX Layout")
.

setBoundaryType(PlateBoundaryOptionBuilder.BoundaryTypes) - Method in interface nxopen.features.shipdesign.PlateBoundaryOptionBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setBoundaryType(TrimRegionBuilder.BoundaryOption) - Method in interface nxopen.tooling.TrimRegionBuilder

License requirements: None.

setBoundBox(SpecialPiercingInsertBuilder.BoundBoxType) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setBoundBox(Body) - Method in interface nxopen.tooling.TrimSolidBuilder

Sets the bounding box tag.

setBoundedBlockOrUserDefined(SpecialFormingBuilder.BlockType) - Method in interface nxopen.tooling.SpecialFormingBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setBoundedBoxBuilder(ToolingBoxBuilder) - Method in interface nxopen.tooling.ReplaceSolidBuilder

Sets the new bounded box feature builder.

setBoundingBox(Point3d, Point3d) - Method in interface nxopen.display.DynamicSectionBuilder

Sets bounding box for the section.

setBoundingBox(ViewCopyTo3dBuilder.BoundingBoxOption) - Method in interface nxopen.drawings.ViewCopyTo3dBuilder

License requirements: nx_layout ("NX Layout")
.

setBoundingBoxBuilder(CreateBoxBuilder) - Method in interface nxopen.tooling.ReplaceSolidBuilder

Deprecated.

Deprecated in NX10.0.0. Use Tooling.ReplaceSolidBuilder#setBoundedBoxBuilder instead.

setBoundingBoxClearance(double) - Method in interface nxopen.cam.NcmClearanceBuilder

License requirements: cam_base ("CAM BASE")
.

setBoundingBoxMap(SpatialMap.BoundingBoxMapEnum) - Method in interface nxopen.fields.SpatialMapBuilder

License requirements: None.

setBoundingBoxType(DieInsertBuilder.BoundingBoxTypeItems) - Method in interface nxopen.tooling.DieInsertBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setBoundingObjectMethod(BoundingObjectBuilder.Method) - Method in interface nxopen.geometricutilities.BoundingObjectBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setBoundingPlane(Plane) - Method in interface nxopen.geometricutilities.BoundingObjectBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setBoundingPoint(Point) - Method in interface nxopen.geometricutilities.BoundingObjectBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setBoundingPoint1(Point) - Method in interface nxopen.geometricutilities.BoundingObjectBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setBoundingPoint2(Point) - Method in interface nxopen.geometricutilities.BoundingObjectBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setBoundingProjectPoint(Point) - Method in interface nxopen.geometricutilities.BoundingObjectBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setBoundingVector(Direction) - Method in interface nxopen.geometricutilities.BoundingObjectBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setBoundingVolumes(BoundingVolume[]) - Method in interface nxopen.cae.ImportSimulationBuilder

Set bounding volumes to import
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setBoundSections1(boolean) - Method in interface nxopen.geometricanalysis.sectionanalysis.GridSpacingBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setBoundSections2(boolean) - Method in interface nxopen.geometricanalysis.sectionanalysis.GridSpacingBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setBOutput(boolean) - Method in interface nxopen.cam.AlongMachineAxisMoveBuilder

License requirements: None.

setBoxClearance(double) - Method in interface nxopen.tooling.SpecialFormingBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setBoxColor(NXColor) - Method in interface nxopen.cae.PostAnnotation

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setBoxColor(NXColor) - Method in interface nxopen.features.ToolingBoxBuilder

License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard") OR studio_free_form ("STUDIO FREE FORM") OR features_modeling ("FEATURES MODELING") OR solid_modeling ("SOLIDS MODELING")
.

setBoxColor(int) - Method in interface nxopen.tooling.CreateBoxBuilder

License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard") OR studio_free_form ("STUDIO FREE FORM") OR features_modeling ("FEATURES MODELING") OR solid_modeling ("SOLIDS MODELING")
.

setBoxColorValue(Point3d) - Method in interface nxopen.tooling.CreateBoxBuilder

Sets box color.

setBoxCsysPosition(Point3d) - Method in interface nxopen.tooling.CreateBoxBuilder

Sets point position of csys for box.

setBoxExtentDelayUpdate(boolean) - Method in interface nxopen.display.DynamicSectionBuilder

License requirements: None.

setBoxExtentMargin(double) - Method in interface nxopen.display.DynamicSectionBuilder

License requirements: None.

setBoxFaceToggle(boolean) - Method in interface nxopen.tooling.ReplaceSolidBuilder

License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setBoxFill(boolean) - Method in interface nxopen.cae.PostAnnotation

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setBoxMatrixAndPosition(Matrix3x3, Point3d) - Method in interface nxopen.features.ToolingBoxBuilder

Sets box csys matrix.

setBoxMatrixAndPosition(Matrix3x3, Point3d) - Method in interface nxopen.tooling.CreateBoxBuilder

Sets box csys matrix.

setBoxMatrixAndPosition(Matrix3x3, Point3d) - Method in interface nxopen.tooling.SpecialFormingBuilder

Sets box csys matrix.

setBoxMatrixAndPosition(Matrix3x3, Point3d) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder

Sets box csys matrix.

setBoxOrientation(PathTransitionBuilder.HealOrientation) - Method in interface nxopen.mechanicalrouting.PathTransitionBuilder

License requirements: routing_base ("Routing Basic")
.

setBoxOverlapLogic(BoxSearchTerm.BoxOverlapLogicType) - Method in interface nxopen.assemblies.BoxSearchTermBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setBoxPosition(Point3d) - Method in interface nxopen.features.ToolingBoxBuilder

License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard") OR studio_free_form ("STUDIO FREE FORM") OR features_modeling ("FEATURES MODELING") OR solid_modeling ("SOLIDS MODELING")
.

setBoxPosition(Point3d) - Method in interface nxopen.tooling.DieInsertBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setBoxPosition(Point3d) - Method in interface nxopen.tooling.SpecialFormingBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setBoxPosition(Point3d) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setBoxTextAlignment(PostAnnotation.TextAlignment) - Method in interface nxopen.cae.PostAnnotation

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setBoxTranluceny(boolean) - Method in interface nxopen.cae.PostAnnotation

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setBP1Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setBP1LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setBP1Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setBP1RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setBP2Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setBP2Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarWizardBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setBP2LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setBP2Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setBP2Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarWizardBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setBP2RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setBP3Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setBP3LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setBP3Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setBP3RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setBP4Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setBP4LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setBP4Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setBP4RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setBPillarFeature(HeadImpactBPillar) - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setBranchAngleMethod(FormboardLayoutBuilder.BranchAngle) - Method in interface nxopen.formboard.FormboardLayoutBuilder

License requirements: routing_harness ("Routing Harness")
.

setBranchAngleType(OrientBranchBuilder.BranchAngleMethod) - Method in interface nxopen.formboard.OrientBranchBuilder

License requirements: routing_harness ("Routing Harness")
.

setBranchSeedObject(ISegment) - Method in interface nxopen.formboard.OrientBranchBuilder

Sets the selected branch ISegment when a branch is selected by branch method by Routing Object Collector.

setBranchShapeType(FormboardLayoutBuilder.BranchShape) - Method in interface nxopen.formboard.FormboardLayoutBuilder

License requirements: routing_harness ("Routing Harness")
.

setBreakerHoleAttributes(String, String, int, String) - Method in interface nxopen.die.PierceHoleChildBuilder

Sets the breaker hole attributes, note existance of attributes depends on usage in main feature
License requirements: ug_die_design ("Die Design")
.

setBreakerHoleAttributes(String, String, int, String) - Method in interface nxopen.die.PierceHoleParentBuilder

Sets the breaker hole attributes, note existance of attributes depends on usage in main feature
License requirements: ug_die_design ("Die Design")
.

setBreakerHoleDepth(String) - Method in interface nxopen.die.PierceHoleChildBuilder

License requirements: ug_die_design ("Die Design")
.

setBreakerHoleDepth(String) - Method in interface nxopen.die.PierceHoleParentBuilder

License requirements: ug_die_design ("Die Design")
.

setBreakerHoleDirection(ILocation) - Method in interface nxopen.die.PierceHoleChildBuilder

Sets the breaker hole direction of the pierce hole
License requirements: ug_die_design ("Die Design")
.

setBreakerHoleFactor(String) - Method in interface nxopen.die.PierceHoleChildBuilder

License requirements: ug_die_design ("Die Design")
.

setBreakerHoleFactor(String) - Method in interface nxopen.die.PierceHoleParentBuilder

License requirements: ug_die_design ("Die Design")
.

setBreakerHoleLocation(ILocation) - Method in interface nxopen.die.PierceHoleChildBuilder

Sets the location of breaker holes for the pierce hole
License requirements: ug_die_design ("Die Design")
.

setBreakerHoleOffset(String) - Method in interface nxopen.die.PierceHoleChildBuilder

License requirements: ug_die_design ("Die Design")
.

setBreakerHoleOffset(String) - Method in interface nxopen.die.PierceHoleParentBuilder

License requirements: ug_die_design ("Die Design")
.

setBreakerHoleShape(DirectionOption, IProfile[]) - Method in interface nxopen.die.PierceHoleChildBuilder

Sets the breaker hole shape of the pierce hole
License requirements: ug_die_design ("Die Design")
.

setBreakGap(double) - Method in interface nxopen.drawings.ViewBreakBuilder

License requirements: drafting ("DRAFTING")
.

setBreakingMode(BreakingConstraintBuilder.BreakingModeType) - Method in interface nxopen.mechatronics.BreakingConstraintBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setBreakInterpartExpression(boolean) - Method in interface nxopen.assemblies.RelinkerBuilder

License requirements: wave ("WAVE FUNCTIONALITY")
.

setBreakLine1Anchor(Point) - Method in interface nxopen.drawings.BrokenViewBuilder

License requirements: None.

setBreakLine1Associative(boolean) - Method in interface nxopen.drawings.BrokenViewBuilder

License requirements: None.

setBreakLine1ModelAnchor(Point) - Method in interface nxopen.drawings.BrokenViewBuilder

License requirements: None.

setBreakLine2Anchor(Point) - Method in interface nxopen.drawings.BrokenViewBuilder

License requirements: None.

setBreakLine2Associative(boolean) - Method in interface nxopen.drawings.BrokenViewBuilder

License requirements: None.

setBreakLine2ModelAnchor(Point) - Method in interface nxopen.drawings.BrokenViewBuilder

License requirements: None.

setBreakLineAmplitude(double) - Method in interface nxopen.drawings.ViewBreakBuilder

License requirements: drafting ("DRAFTING")
.

setBreakLineAmplitude(double) - Method in interface nxopen.preferences.PartDrafting

Sets the break line amplitude.

setBreakLineColor(NXColor) - Method in interface nxopen.preferences.PartDrafting

Sets the break line color.

setBreakLineExtension(double) - Method in interface nxopen.drawings.ViewBreakBuilder

License requirements: drafting ("DRAFTING")
.

setBreakLineExtension(double) - Method in interface nxopen.preferences.PartDrafting

Sets
License requirements: None.

setBreakLineGap(double) - Method in interface nxopen.preferences.PartDrafting

Sets the break line gap.

setBreakLineStyle(ViewBreakBuilder.Viewbreaklinestyle) - Method in interface nxopen.drawings.ViewBreakBuilder

License requirements: drafting ("DRAFTING")
.

setBreakLinesVisibility(boolean) - Method in interface nxopen.preferences.PartDrafting

Sets the break lines visibility.

setBreakLineType(BrokenViewBuilder.BreakLineStyle) - Method in interface nxopen.drawings.BrokenViewBuilder

License requirements: None.

setBreakLineType(PartDrafting.BreakLineStyle) - Method in interface nxopen.preferences.PartDrafting

Sets the break line type.

setBreakLineWidth(int) - Method in interface nxopen.preferences.PartDrafting

Sets the break line width.

setBreakoutData(Tag, UFDraw.BreakoutData) - Method in interface nxopen.uf.UFDraw

Refer to UF_DRAW_set_breakout_data for documentation.

setBreakRegionData(Tag, UFDraw.BreakRegionData) - Method in interface nxopen.uf.UFDraw

Refer to UF_DRAW_set_break_region_data for documentation.

setBreakSize(double) - Method in interface nxopen.annotations.BreakSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setBreakThrough(boolean) - Method in interface nxopen.cam.CenterlineDrillTurningBuilder

Deprecated.

Deprecated in NX9.0.0. Use 'depth reference' instead.

setBreakType(BrokenViewBuilder.TypeBreak) - Method in interface nxopen.drawings.BrokenViewBuilder

License requirements: None.

setBreakVisibility(boolean) - Method in interface nxopen.drawings.BrokenViewBuilder

License requirements: None.

setBreakWaveLink(boolean) - Method in interface nxopen.assemblies.RelinkerBuilder

License requirements: wave ("WAVE FUNCTIONALITY")
.

setBridgeContinuity(VarOffsetFaceBuilder.Continuity) - Method in interface nxopen.features.VarOffsetFaceBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setBridgedGapSize(double) - Method in interface nxopen.features.ProjectCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setBridgeGap(boolean) - Method in interface nxopen.tooling.TraverseLoopBuilder

License requirements: None.

setBrightColor(double[]) - Method in interface nxopen.geometricanalysis.HighlightLinesAnalysisBuilder

Sets the color of the bright (lit) areas of reflection contours
License requirements: studio_analyze ("STUDIO ANALYZE")
.

setBrightness(double) - Method in interface nxopen.display.RayTracedStudioBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setBsplineTol(double) - Method in interface nxopen.Step203Creator

Deprecated.

Deprecated in NX11.0.0. Use StepCreator instead.

setBsplineTol(double) - Method in interface nxopen.Step214Creator

Deprecated.

Deprecated in NX11.0.0. Use StepCreator instead.

setBsplineTol(double) - Method in interface nxopen.StepCreator

License requirements: None.

setBSurfaceExtractionOption(IFormBuilder.BSurfaceExtractionOptions) - Method in interface nxopen.features.IFormBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setBsurfKnotDisplay(Tag, boolean) - Method in interface nxopen.uf.UFModlGeneral

Refer to UF_MODL_set_bsurf_knot_display for documentation.

setBsurfPoleDisplay(Tag, boolean) - Method in interface nxopen.uf.UFModlGeneral

Refer to UF_MODL_set_bsurf_pole_display for documentation.

setBubbleDiameter(double) - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setBubbleExtension(double) - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setBubbleExtensionOffset(double) - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setBubbleLeader(double) - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setBubblesUnallowedChars(String) - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setBufferRadiusFactor(double) - Method in interface nxopen.motion.BodyContactRecurdyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using BodyContactRecurdyn.bufferRadiusFactorExpression() to query or edit it.

setBufferRadiusFactor(double) - Method in interface nxopen.motion.CurveContactRecurdyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using CurveContactRecurdyn.bufferRadiusFactorExpression() to query or edit it.

setBuildEndTaper(boolean) - Method in interface nxopen.die.DrawBeadBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setBuilder(DrawingCreationWizardBuilder) - Method in interface nxopen.drafting.DrawingAutomationWizard

Sets the drawing automation wizard builder
License requirements: None.

setBuilder(Builder) - Method in interface nxopen.geometricutilities.WaveLinkRepository

Set the builder of the active command.If the builder is feat builder, then the feature from the builder will be queried and used as master feature.

setBuilderData(Line, double[], String, double, int) - Method in interface nxopen.routing.AddFontBuilder

Takes selected line and information on the font selected which will be used to build the font
License requirements: routing_base ("Routing Basic")
.

setBuilderData(Line, Line, double, Point3d, Point3d, boolean, boolean) - Method in interface nxopen.routing.GapDisplayBuilder

Takes selected line, gap start and end points, and gap type settings in to set builder data.

setBuilderType(ProxyObjectBuilder.Type) - Method in interface nxopen.mechatronics.ProxyObjectBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setBuilderVersion(ObjectBuilder.BuilderVersion) - Method in interface nxopen.assemblies.productinterface.ObjectBuilder

Sets the version of this builder.

setBuilderVersion(CopyPasteBuilder.BuilderVersion) - Method in interface nxopen.features.CopyPasteBuilder

The builder version setting function.

setBuildSolid(boolean) - Method in interface nxopen.features.shipdesign.EdgeReinforcementBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setBuildSolid(boolean) - Method in interface nxopen.features.shipdesign.PillarSystemBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setBuildSolid(boolean) - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setBuildStartTaper(boolean) - Method in interface nxopen.die.DrawBeadBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setBuiltInPathObjs(Tag, int, Tag[]) - Method in interface nxopen.uf.UFRoute

Refer to UF_ROUTE_set_built_in_path_objs for documentation.

setBuiltupManMode(BuiltUpManModeBuilder.BuiltUpManModeType) - Method in interface nxopen.features.shipdesign.BuiltUpManModeBuilder

License requirements: nx_ship_mfg_prep ("Ship Manufacturing")
.

setBulkheadEnum(ShipIntersectionsBuilder.Type) - Method in interface nxopen.features.shipdesign.ShipIntersectionsBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setBulkHeadName(String) - Method in interface nxopen.features.shipdesign.BulkHeadListItemBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setBulkHeads(boolean) - Method in interface nxopen.annotations.BaseFrameBarBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setBulkHeadsLabelColor(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setBulkHeadsLabelFont(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setBulkHeadsLabelItalicized(boolean) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setBulkHeadsLabelName(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setBulkHeadsLabelWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setBulkHeadsTicColor(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setBulkHeadsTicDisplay(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setBulkHeadsTicFont(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setBulkHeadsTicLength(double) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setBulkHeadsTicWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setBumperPlane(Plane) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setBundleColor(int) - Method in interface nxopen.preferences.RoutingElectrical

Sets the default bundle color.

setBundlesForUse(String[]) - Method in interface nxopen.LicenseManager

Changes the existing license bundle selection.

setBurringColor(NXColor) - Method in interface nxopen.tooling.QuickQuotationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setBurringDirection(BurringInsertBuilder.BurringDirections) - Method in interface nxopen.tooling.BurringInsertBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setBurringPunchType(BurringInsertBuilder.BurringPunchTypes) - Method in interface nxopen.tooling.BurringInsertBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setBushingJointAsymmetric(boolean) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setBushingType(BushingBuilder.BushingTypes) - Method in interface nxopen.motion.BushingBuilder

License requirements: mechanisms ("MECHANISMS")
.

setBusinessModifier(NXObject) - Method in interface nxopen.annotations.PmiAttributeBuilder

License requirements: None.

setBusinessModifiers(BusinessModifier[]) - Method in interface nxopen.annotations.IPmi

Sets the business modifiers.

setBusinessModifiers(BusinessModifier[]) - Method in interface nxopen.annotations.PmiData

Sets the business modifiers
License requirements: None.

setBusinessProcessModifierData(Tag, UFPd.BusinessModifier) - Method in interface nxopen.uf.UFPd

Refer to UF_PD_set_business_process_modifier_data for documentation.

setButtColor(int) - Method in interface nxopen.weld.WeldJointBuilder

License requirements: structure_weld ("STRUCTURE WELD")
.

setButtFont(DisplayableObject.ObjectFont) - Method in interface nxopen.weld.WeldJointBuilder

License requirements: structure_weld ("STRUCTURE WELD")
.

setButtonSensitivity(MenuButton.SensitivityStatus) - Method in interface nxopen.menubar.MenuButton

Sets the sensitivity of the button.

setButtonSensitivity(int, UFMb.State) - Method in interface nxopen.uf.UFMb

Refer to UF_MB_set_button_sensitivity for documentation.

setButtWidth(DisplayableObject.ObjectWidth) - Method in interface nxopen.weld.WeldJointBuilder

License requirements: structure_weld ("STRUCTURE WELD")
.

setBwiWeldClass(DurabilityEventFatigueSettingsBuilder.BwiWeldClassEnum) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setByAboveText(boolean) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder

License requirements: None.

setByAfterText(boolean) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder

License requirements: None.

setByAngle(boolean) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder

License requirements: None.

setByBeforeText(boolean) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder

License requirements: None.

setByBelowText(boolean) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder

License requirements: None.

setByCalloutType(boolean) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder

License requirements: None.

setByCharacteristic(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

License requirements: None.

setByCircleU(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

License requirements: None.

setByCircleUValue(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

License requirements: None.

setByColor(boolean) - Method in interface nxopen.tooling.TraverseLoopBuilder

License requirements: None.

setByCounterboreDepth(boolean) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder

License requirements: None.

setByCounterboreDiameter(boolean) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder

License requirements: None.

setByCountersinkAngle(boolean) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder

License requirements: None.

setByCountersinkDiameter(boolean) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder

License requirements: None.

setByCutoff(boolean) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder

License requirements: None.

setByDatumFeatureSymbolLabel(boolean) - Method in interface nxopen.annotations.SearchCriteriaDatumFeatureSymbolBuilder

License requirements: None.

setByDatumMovable(boolean) - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder

License requirements: None.

setByDatumTargetLabel(boolean) - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder

License requirements: None.

setByDatumTargetType(boolean) - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder

License requirements: None.

setByDepth(boolean) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder

License requirements: None.

setByDeviation(boolean) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder

License requirements: None.

setByDiameter(boolean) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder

License requirements: None.

setByDiameterSymbol(boolean) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder

License requirements: None.

setByDimensionType(boolean) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder

License requirements: None.

setByDimensionValue(boolean) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder

License requirements: None.

setByFreeState(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

License requirements: None.

setByGrade(boolean) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder

License requirements: None.

setByHeight(boolean) - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder

License requirements: None.

setByInnerDiameter(boolean) - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder

License requirements: None.

setByLaySymbol(boolean) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder

License requirements: None.

setByLowerText(boolean) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder

License requirements: None.

setByLowerTolerance(boolean) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder

License requirements: None.

setByLowerTolerance(boolean) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder

License requirements: None.

setByMachining(boolean) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder

License requirements: None.

setByMachiningToleranceType(boolean) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder

License requirements: None.

setByMaximum(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

License requirements: None.

setByOuterDiameter(boolean) - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder

License requirements: None.

setByPitch(boolean) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder

License requirements: None.

setByPrimaryDatum(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

Deprecated.

Deprecated in NX10.0.0. Use Annotations.SearchCriteriaFeatureControlFrameBuilder#datumToggle and Annotations.SearchCriteriaFeatureControlFrameBuilder#setDatumToggle instead.

setByPrimaryDatumDual(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

Deprecated.

Deprecated in NX10.0.0. Use Annotations.SearchCriteriaFeatureControlFrameBuilder#datumToggle and Annotations.SearchCriteriaFeatureControlFrameBuilder#setDatumToggle instead.

setByPrimaryDatumDualMCM(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

Deprecated.

Deprecated in NX10.0.0. Use Annotations.SearchCriteriaFeatureControlFrameBuilder#datumMCMToggle and Annotations.SearchCriteriaFeatureControlFrameBuilder#setDatumMCMToggle instead.

setByPrimaryDatumMCM(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

Deprecated.

Deprecated in NX10.0.0. Use Annotations.SearchCriteriaFeatureControlFrameBuilder#datumMCMToggle and Annotations.SearchCriteriaFeatureControlFrameBuilder#setDatumMCMToggle instead.

setByProductionProcess(boolean) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder

License requirements: None.

setByProjected(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

License requirements: None.

setByProjectedValue(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

License requirements: None.

setByRadialSymbol(boolean) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder

License requirements: None.

setByRoughness(boolean) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder

License requirements: None.

setByScrewSize(boolean) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder

License requirements: None.

setBySecondaryDatum(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

Deprecated.

Deprecated in NX10.0.0. Use Annotations.SearchCriteriaFeatureControlFrameBuilder#datumToggle and Annotations.SearchCriteriaFeatureControlFrameBuilder#setDatumToggle instead.

setBySecondaryDatumDual(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

Deprecated.

Deprecated in NX10.0.0. Use Annotations.SearchCriteriaFeatureControlFrameBuilder#datumToggle and Annotations.SearchCriteriaFeatureControlFrameBuilder#setDatumToggle instead.

setBySecondaryDatumDualMCM(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

Deprecated.

Deprecated in NX10.0.0. Use Annotations.SearchCriteriaFeatureControlFrameBuilder#datumMCMToggle and Annotations.SearchCriteriaFeatureControlFrameBuilder#setDatumMCMToggle instead.

setBySecondaryDatumMCM(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

Deprecated.

Deprecated in NX10.0.0. Use Annotations.SearchCriteriaFeatureControlFrameBuilder#datumMCMToggle and Annotations.SearchCriteriaFeatureControlFrameBuilder#setDatumMCMToggle instead.

setBySecondaryRoughness(boolean) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder

License requirements: None.

setByStatistical(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

License requirements: None.

setBySurfaceFinishType(boolean) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder

License requirements: None.

setByTangentPlane(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

License requirements: None.

setByTaperAngle(boolean) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder

License requirements: None.

setByTertiaryDatum(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

Deprecated.

Deprecated in NX10.0.0. Use Annotations.SearchCriteriaFeatureControlFrameBuilder#datumToggle and Annotations.SearchCriteriaFeatureControlFrameBuilder#setDatumToggle instead.

setByTertiaryDatumDual(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

Deprecated.

Deprecated in NX10.0.0. Use Annotations.SearchCriteriaFeatureControlFrameBuilder#datumToggle and Annotations.SearchCriteriaFeatureControlFrameBuilder#setDatumToggle instead.

setByTertiaryDatumDualMCM(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

Deprecated.

Deprecated in NX10.0.0. Use Annotations.SearchCriteriaFeatureControlFrameBuilder#datumMCMToggle and Annotations.SearchCriteriaFeatureControlFrameBuilder#setDatumMCMToggle instead.

setByTertiaryDatumMCM(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

Deprecated.

Deprecated in NX10.0.0. Use Annotations.SearchCriteriaFeatureControlFrameBuilder#datumMCMToggle and Annotations.SearchCriteriaFeatureControlFrameBuilder#setDatumMCMToggle instead.

setByTertiaryRoughness(boolean) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder

License requirements: None.

setByText(boolean) - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder

License requirements: None.

setByText(boolean) - Method in interface nxopen.annotations.SearchCriteriaPMINotesBuilder

License requirements: None.

setByThreadDepth(boolean) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder

License requirements: None.

setByThreadSize(boolean) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder

License requirements: None.

setByTolerance(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

License requirements: None.

setByTolerance(boolean) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder

License requirements: None.

setByToleranceMCM(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

License requirements: None.

setByToleranceType(boolean) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder

License requirements: None.

setByUpperText(boolean) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder

License requirements: None.

setByUpperTolerance(boolean) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder

License requirements: None.

setByUpperTolerance(boolean) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder

License requirements: None.

setByWavinessText(boolean) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder

License requirements: None.

setByWidth(boolean) - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder

License requirements: None.

setByZoneShape(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

License requirements: None.

setC(String) - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder

License requirements: drafting ("DRAFTING")
.

setC(String) - Method in interface nxopen.annotations.SurfaceFinishBuilder

License requirements: None.

setC0KnotLineColor(int) - Method in interface nxopen.preferences.PartModeling

Sets the C0 knot line color
License requirements: None.

setC0KnotLineFont(PartModeling.GridKnotLineFontType) - Method in interface nxopen.preferences.PartModeling

Sets the C0 knot line font
License requirements: None.

setC0KnotUseBodyColor(boolean) - Method in interface nxopen.preferences.PartModeling

Sets whether c0 knot line use body color
License requirements: None.

setC0KnotUseBodyFont(boolean) - Method in interface nxopen.preferences.PartModeling

Sets whether C0_knot use body font
License requirements: None.

setC1KnotLineColor(int) - Method in interface nxopen.preferences.PartModeling

Sets the C1 knot line color
License requirements: None.

setC1KnotLineFont(PartModeling.GridKnotLineFontType) - Method in interface nxopen.preferences.PartModeling

Sets the C1 knot line font
License requirements: None.

setC1KnotUseBodyColor(boolean) - Method in interface nxopen.preferences.PartModeling

Sets whether c1 knot line use body color
License requirements: None.

setC1KnotUseBodyFont(boolean) - Method in interface nxopen.preferences.PartModeling

Sets whether C1_knot use body font
License requirements: None.

setC2KnotLineColor(int) - Method in interface nxopen.preferences.PartModeling

Sets the C2 knot line color
License requirements: None.

setC2KnotLineFont(PartModeling.GridKnotLineFontType) - Method in interface nxopen.preferences.PartModeling

Sets the C2 knot line font
License requirements: None.

setC2KnotUseBodyColor(boolean) - Method in interface nxopen.preferences.PartModeling

Sets whether c2 knot line use body color
License requirements: None.

setC2KnotUseBodyFont(boolean) - Method in interface nxopen.preferences.PartModeling

Sets whether C2_knot use body font
License requirements: None.

setCableDirection(Direction) - Method in interface nxopen.features.sheetmetal.FlexibleCableBuilder

Sets the cable direction.

setCableLocation(int) - Method in interface nxopen.routing.electrical.CableStockDefinition

Sets the cable stock's location
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setCacheNcProgram(boolean) - Method in interface nxopen.cam.SimulationOptionsBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setCadData(Part, String) - Method in interface nxopen.cae.FemCreationOptions

Set associated CAD data
License requirements: None.

setCaeSectionPropertyValue(String, BeamSectionOptions) - Method in interface nxopen.cae.PropertyTable

Sets the beam section options BeamSectionOptions
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Created in NX5.0.0

setCageCode(String) - Method in interface nxopen.annotations.EnterpriseIdentificationBuilder

License requirements: None.

setCagePolylineColor(int) - Method in interface nxopen.preferences.SubdivisionModelingPreferences

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setCagePolylineFont(int) - Method in interface nxopen.preferences.SubdivisionModelingPreferences

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setCagePolylineVertexColor(int) - Method in interface nxopen.preferences.SubdivisionModelingPreferences

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setCagePolylineVertexSize(SubdivisionModelingPreferences.CagePolylineVertexSizes) - Method in interface nxopen.preferences.SubdivisionModelingPreferences

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setCagePolylineVertexStyle(SubdivisionModelingPreferences.CagePolylineVertexStyles) - Method in interface nxopen.preferences.SubdivisionModelingPreferences

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setCagePolylineWidth(int) - Method in interface nxopen.preferences.SubdivisionModelingPreferences

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setCalculateBeamResults(boolean) - Method in interface nxopen.cae.ResultMeasureResultAllOptions

Set the option to calculate beam stresses for beam results only
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setCalculateBeamStrResults(boolean) - Method in interface nxopen.cae.ResultParameters

Sets a flag to calculate beam stresses and strains from element forces and section geometry (if available).

setCalculateMaxDeviation(boolean) - Method in interface nxopen.die.SpringbackCompensationBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR nx_freeform_2 ("advanced freeform modeling")
.

setCalculatePenetrationDepth(boolean) - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setCalculateStaticOffset(boolean) - Method in interface nxopen.cae.responsesimulation.RSEvent

Set the option setting for calculating static offset result.

setCalculation(HeadImpactBuilder.CalculationType) - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setCalculationCalculateMethod(WallThicknessCheckerBuilder.CalculateMethod) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setCalculationDrawDirection(Direction) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setCalculationMaximumSpacing(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setCalculationMaximumThicknessTolerance(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setCalculationMethod(ClearanceAnalysisBuilder.CalculationMethodType) - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setCalculationMethod(int) - Method in interface nxopen.features.shipdesign.PlatePreparationBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setCalculationMethod(InnerAngleBuilder.CalculationMethodType) - Method in interface nxopen.features.vehicledesign.InnerAngleBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setCalculationMethod(SectionAnalysisBuilder.CalculationMethodType) - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setCalculationMethod(SectionAnalysisExBuilder.CalculationMethodType) - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setCalculationMethod(SurfaceIntersectionBuilder.CalculationTypes) - Method in interface nxopen.geometricanalysis.SurfaceIntersectionBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setCalculationOption(MWMoldedPartValidationBuilder.CalculateOption) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setCalculationProductBody(Body) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

Set the product body to be analyzed on the Calculate Tab page.

setCalculationProjectToFace(boolean) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setCalculationSamplePointsIntervalScale(int) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setCalculationType(ForceCalculationBuilder.CalculationTypes) - Method in interface nxopen.tooling.ForceCalculationBuilder

License requirements: None.

setCalibrationDepth(double) - Method in interface nxopen.cam.ProbeCalibrateStylusMoveBuilder

License requirements: None.

setCalibrationType(ProbeCalibrateStylusMoveBuilder.CalibrateStylusType) - Method in interface nxopen.cam.ProbeCalibrateStylusMoveBuilder

License requirements: None.

setCallbackMessage(String) - Method in interface nxopen.weld.WeldJointBuilder

Sets a message to display after callback processing ends
License requirements: structure_weld ("STRUCTURE WELD")
.

setCalloutModeType(CalloutGroupBuilder.Mode) - Method in interface nxopen.annotations.CalloutGroupBuilder

License requirements: drafting ("DRAFTING")
.

setCalloutSuffix(String) - Method in interface nxopen.annotations.PartsListBuilder

License requirements: None.

setCalloutType(SearchCriteriaCalloutBuilder.CalloutTypes) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder

License requirements: None.

setCamber(double) - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setCamber(double) - Method in interface nxopen.features.vehicledesign.BaseDataWheelBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setCamDefinitionMethod(MotionSimulationBuilder.CamDefinitionType) - Method in interface nxopen.tooling.MotionSimulationBuilder

Deprecated.

Deprecated in NX10.0.0. This functionality is no longer supported.

setCamDirection(ILocation) - Method in interface nxopen.die.FlangeTaskBuilder

Sets the cam direction of the flange task
License requirements: die_engineering ("DIE ENGINEERING")
.

setCamDirection(ILocation) - Method in interface nxopen.die.FormTaskBuilder

Sets the cam direction of the form task.

setCamDirection(ILocation) - Method in interface nxopen.die.PierceTaskBuilder

Sets the cam direction of the pierce task
License requirements: die_engineering ("DIE ENGINEERING")
.

setCamDirection(IReferenceAxis) - Method in interface nxopen.die.SteelInsertBuilder

Sets the cam direction of the steelinsert
License requirements: ug_die_design ("Die Design")
.

setCamDirection(ILocation) - Method in interface nxopen.die.TrimTaskBuilder

Sets the cam direction of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.

setCamDirection(Direction) - Method in interface nxopen.tooling.DieDesignTrimPostBuilder

License requirements: ug_die_design ("Die Design")
.

setCamDirection(Direction) - Method in interface nxopen.tooling.DieEngFormTaskBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setCamera(String) - Method in interface nxopen.cam.InspectionGraphicalReportBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setCameraAxis(Axis) - Method in interface nxopen.features.vehicledesign.CloseRangeCameraListItemBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setCameraCsys(CoordinateSystem) - Method in interface nxopen.features.vehicledesign.CloseRangeCameraListItemBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setCameraDistance(double) - Method in interface nxopen.display.PerspectiveOptionsBuilder

License requirements: None.

setCameraLayerAndXmlp(String[], String[]) - Method in interface nxopen.die.FlangeTaskBuilder

Sets the camera layer settings and xmlp data
License requirements: die_engineering ("DIE ENGINEERING")
.

setCameraLayerAndXmlp(String[], String[]) - Method in interface nxopen.die.PierceTaskBuilder

Sets the camera layer settings and xmlp data
License requirements: die_engineering ("DIE ENGINEERING")
.

setCameraLayerAndXmlp(String[], String[]) - Method in interface nxopen.die.TrimTaskBuilder

Sets the camera layer settings and xmlp data
License requirements: die_engineering ("DIE ENGINEERING")
.

setCameraMatrix(Matrix3x3) - Method in interface nxopen.display.CameraBuilder

License requirements: None.

setCameraName(String) - Method in interface nxopen.cam.WorkInstructionBuilder

License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.

setCameraName(String) - Method in interface nxopen.display.CameraBuilder

License requirements: None.

setCameraNameChar(String) - Method in interface nxopen.display.CameraBuilder

License requirements: None.

setCameraNames(String[]) - Method in interface nxopen.die.FlangeTaskBuilder

Sets the names of the camera
License requirements: die_engineering ("DIE ENGINEERING")
.

setCameraNames(String[]) - Method in interface nxopen.die.PierceTaskBuilder

Sets the names of the camera
License requirements: die_engineering ("DIE ENGINEERING")
.

setCameraNames(String[]) - Method in interface nxopen.die.TrimTaskBuilder

Sets the names of the camera
License requirements: die_engineering ("DIE ENGINEERING")
.

setCameraPosition(Point3d) - Method in interface nxopen.display.CameraBuilder

License requirements: None.

setCameraType(CloseRangeCameraListItemBuilder.Types) - Method in interface nxopen.features.vehicledesign.CloseRangeCameraListItemBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setCameraViews(View[]) - Method in interface nxopen.die.FlangeTaskBuilder

Sets the camera views of the flange task
License requirements: die_engineering ("DIE ENGINEERING")
.

setCameraViews(View[]) - Method in interface nxopen.die.PierceTaskBuilder

Sets the camera views of the pierce task
License requirements: die_engineering ("DIE ENGINEERING")
.

setCameraViews(View[]) - Method in interface nxopen.die.TrimTaskBuilder

Sets the camera views of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.

setCamName(String) - Method in interface nxopen.tooling.DefineCamBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setCamPreferences(UFCam.Preferences) - Method in interface nxopen.uf.UFCam

Refer to UF_CAM_set_cam_preferences for documentation.

setCamProfile(CamProfile) - Method in interface nxopen.mechatronics.CamBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setCamProfile(CamProfile) - Method in interface nxopen.mechatronics.GraphControlBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setCAMRelief(double) - Method in interface nxopen.tooling.DieDesignTrimPostBuilder

License requirements: ug_die_design ("Die Design")
.

setCamStatus(boolean) - Method in interface nxopen.cam.Cycle

License requirements: cam_base ("CAM BASE")
.

setCamType(FlangeTaskBuilder.CamTypes) - Method in interface nxopen.die.FlangeTaskBuilder

Sets the cam type of the flange task
License requirements: die_engineering ("DIE ENGINEERING")
.

setCamType(PierceTaskBuilder.CamTypes) - Method in interface nxopen.die.PierceTaskBuilder

Sets the cam type of the pierce task
License requirements: die_engineering ("DIE ENGINEERING")
.

setCamType(TrimTaskBuilder.CamTypes) - Method in interface nxopen.die.TrimTaskBuilder

Sets the cam type of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.

setCamType(DieEngTrimTaskBuilder.TrimTaskCamType) - Method in interface nxopen.tooling.DieEngTrimTaskBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setCamunitColor(NXColor) - Method in interface nxopen.tooling.QuickQuotationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setCamValue(int) - Method in interface nxopen.cam.Cycle

License requirements: cam_base ("CAM BASE")
.

setCanAllowBackSideSelection(boolean) - Method in interface nxopen.preferences.SubdivisionModelingPreferences

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setCanApplyToAll(boolean) - Method in interface nxopen.features.IFormBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setCanBlend(boolean) - Method in interface nxopen.features.EdgeSymmetryBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setCancelled() - Method in interface nxopen.SubdivisionTaskEnvironment

Marks the task to be cancelled such that during SubdivisionTaskEnvironment.exit() task is undone and all the changes are discarded.

setCanConnectSymmetrically(boolean) - Method in interface nxopen.features.subdivision.SubdivisionFillBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setCanCopyAsSketch(boolean) - Method in interface nxopen.gateway.CopyCutBuilder

License requirements: None.

setCanCreateAltrep(boolean) - Method in interface nxopen.FileNew

Sets the flag specifying if the current template customization allows Alternate representation creation using the template
License requirements: None.

setCanCreateBoundingBox(boolean) - Method in interface nxopen.features.TextBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setCanCreateNewBody(boolean) - Method in interface nxopen.features.EdgeSymmetryBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setCanCreateNewBody(boolean) - Method in interface nxopen.features.IFormBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setCanCreateSingleFeature(boolean) - Method in interface nxopen.features.subdivision.ImportSubdivisionGeometryBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setCanDeselectObjectsAutomatically(boolean) - Method in interface nxopen.features.subdivision.SelectCageObjectData

Deprecated.

Deprecated in NX11.0.0. There is no replacement for this unused property.

setCandidateView(DraftingView) - Method in interface nxopen.drawings.ViewAlignmentBuilder

License requirements: drafting ("DRAFTING")
.

setCanDivide(boolean) - Method in interface nxopen.facet.SnipFacetBodyBuilder

License requirements: None.

setCanInferConstraintFromAttachmentParent(boolean) - Method in interface nxopen.features.GeometricConstraintData

License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setCanJoinCurves(boolean) - Method in interface nxopen.features.TextBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setCanKeepParameterization(boolean) - Method in interface nxopen.features.IFormBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setCanKeepTemplateSelected(boolean) - Method in interface nxopen.features.FitCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setCanMoveAlongCurve(boolean) - Method in interface nxopen.geometricutilities.CurveShapingBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setCanMoveToolOnly(boolean) - Method in interface nxopen.features.subdivision.CopyCageBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setCanMoveToolOnly(boolean) - Method in interface nxopen.features.subdivision.PasteCageData

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setCanMoveToolOnly(boolean) - Method in interface nxopen.features.subdivision.SubdivisionExtrudeCageBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setCanMoveToolOnly(boolean) - Method in interface nxopen.features.subdivision.TransformCageData

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setCanOptimizeCurve(boolean) - Method in interface nxopen.features.IsoclineCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setCanProjectCurves(boolean) - Method in interface nxopen.features.TextBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setCanReferenceText(boolean) - Method in interface nxopen.features.TextBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setCanRejectPointsAutomatically(boolean) - Method in interface nxopen.features.FitCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setCanRelocateToolToSelection(boolean) - Method in interface nxopen.features.subdivision.CopyCageBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setCanRelocateToolToSelection(boolean) - Method in interface nxopen.features.subdivision.SubdivisionExtrudeCageBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setCanRelocateToolToSelection(boolean) - Method in interface nxopen.features.subdivision.TransformCageData

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setCanReorientToolToSelection(boolean) - Method in interface nxopen.features.subdivision.CopyCageBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setCanReorientToolToSelection(boolean) - Method in interface nxopen.features.subdivision.SubdivisionExtrudeCageBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setCanReorientToolToSelection(boolean) - Method in interface nxopen.features.subdivision.TransformCageData

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setCanResetMcf(boolean) - Method in interface nxopen.features.FeatureCollection

Sets whether mcf is allowed
License requirements: None.

setCanReverseDirection(boolean) - Method in interface nxopen.features.subdivision.CageSectionData

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setCanReverseDirection(boolean) - Method in interface nxopen.geometricutilities.BridgeCurveConnectivity

License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_1 ("basic freeform modeling")
.

setCanReverseIntersectionCurve(boolean) - Method in interface nxopen.features.TextBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setCanReverseOffsetDirection(boolean) - Method in interface nxopen.features.subdivision.OffsetCageBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setCanSew(boolean) - Method in interface nxopen.features.subdivision.SubdivisionLoftBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setCanSew(boolean) - Method in interface nxopen.features.subdivision.SubdivisionRevolveBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setCanSew(boolean) - Method in interface nxopen.features.subdivision.SubdivisionSweepBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setCanShowFacet(boolean) - Method in interface nxopen.geometricanalysis.FaceAnalysisDisplayBuilder

License requirements: None.

setCanShowWeight(boolean) - Method in interface nxopen.preferences.SubdivisionModelingPreferences

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setCanStretchHeight(boolean) - Method in interface nxopen.blockstyler.Tree

License requirements: None.

setCanUseAllPointsInPart(boolean) - Method in interface nxopen.features.FitCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setCanUseFaceFinder(boolean) - Method in interface nxopen.features.MatchEdgeBuilder

License requirements: features_modeling ("FEATURES MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setCanUseFaceFinder(boolean) - Method in interface nxopen.features.StudioXformBuilderEx

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setCanUseKerningSpaces(boolean) - Method in interface nxopen.features.TextBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setCanUseOrientationTool(boolean) - Method in interface nxopen.features.PolylineBuilder

License requirements: features_modeling ("FEATURES MODELING")
.

setCanUseOrientationTool(boolean) - Method in interface nxopen.features.StudioSplineBuilderEx

License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setCapacity(double) - Method in interface nxopen.linedesigner.ConveyorStationFeatureBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setCapColor(NXColor) - Method in interface nxopen.display.DynamicSectionBuilder

License requirements: None.

setCapColorOption(DynamicSectionTypes.CapColorOption) - Method in interface nxopen.display.DynamicSectionBuilder

License requirements: None.

setCapFace(ScCollector) - Method in interface nxopen.features.EmbossBodyBuilder

License requirements: None.

setCapOption(DeleteFaceBuilder.CapOptionValues) - Method in interface nxopen.features.DeleteFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setCapPlane(Plane) - Method in interface nxopen.features.DeleteFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setCaption(ImageDocumentData.CaptionPosition, String) - Method in interface nxopen.openxml.ImageDocumentData

Sets the caption of the image data
License requirements: None.

setCaption(TableDocumentData.CaptionPosition, String) - Method in interface nxopen.openxml.TableDocumentData

Sets the caption of the table data
License requirements: None.

setCaption(String) - Method in interface nxopen.report.ReportImage

License requirements: None.

setCaptureArea(MovieSettingsBuilder.CaptureAreaChoices) - Method in interface nxopen.MovieSettingsBuilder

License requirements: None.

setCaptureMethod(ImageCaptureBuilder.CaptureMethodType) - Method in interface nxopen.gateway.ImageCaptureBuilder

License requirements: drafting ("DRAFTING")
.

setCapType(SketchOffset.CapType) - Method in interface nxopen.SketchOffsetBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setCardName(String) - Method in interface nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder

License requirements: nx_correl_update ("FE Model Update")
.

setCarrierCsys(CoordinateSystem) - Method in interface nxopen.motion.TireBuilder

License requirements: mechanisms ("MECHANISMS")
.

setCarrierPoint(Point) - Method in interface nxopen.motion.TireBuilder

License requirements: mechanisms ("MECHANISMS")
.

setCastRelief(DirectionOption, IProfile[]) - Method in interface nxopen.die.CastReliefParentBuilder

Sets the profile of the cast relief.

setCatalog(DieBaseBuilder.CatalogOpt) - Method in interface nxopen.tooling.DieBaseBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setCatalogFilename(String) - Method in interface nxopen.AttributeTemplatesBuilder

License requirements: None.

setCategory(String) - Method in interface nxopen.annotations.BalloonNoteBuilder

License requirements: None.

setCategory(String) - Method in interface nxopen.annotations.CoordinateNoteBuilder

License requirements: None.

setCategory(String) - Method in interface nxopen.annotations.GeneralNoteBuilder

License requirements: None.

setCategory(String) - Method in interface nxopen.annotations.MaterialSpecificationBuilder

License requirements: None.

setCategory(String) - Method in interface nxopen.annotations.SpecificNoteBuilder

License requirements: None.

setCategory(TableColumnBuilder.CategoryType) - Method in interface nxopen.annotations.TableColumnBuilder

License requirements: drafting ("DRAFTING")
.

setCategory(String) - Method in interface nxopen.AttributePropertiesBaseBuilder

License requirements: None.

setCategory(String) - Method in interface nxopen.AttributeTemplatesBuilder

License requirements: None.

setCategory(int) - Method in interface nxopen.mechatronics.CollisionBodyBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setCategory(int) - Method in interface nxopen.mechatronics.CollisionSensorBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setCategory(int) - Method in interface nxopen.mechatronics.DistanceSensorBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setCategory(String) - Method in interface nxopen.pdm.EffectivityAttributePropertiesBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setCategory(String) - Method in interface nxopen.PhysicalMaterial

Sets the material category
License requirements: None.

setCategory(String) - Method in interface nxopen.validate.OverrideBuilder

License requirements: ug_checkmate ("UG Check Mate")
.

setCategoryName(String) - Method in interface nxopen.linedesigner.ReuseLibraryDragData

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setCategoryType(Category) - Method in interface nxopen.cae.optimization.DAOConstraintBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setCategoryType(Category) - Method in interface nxopen.cae.optimization.DAOObjective

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setCavityAttributes(String, String, int) - Method in interface nxopen.die.ThroatChildBuilder

Sets the cavity attributes, note existance of attributes depends on usage in main feature.

setCavityAttributes(String, String, int) - Method in interface nxopen.die.ThroatParentBuilder

Sets the cavity attributes, note existance of attributes depends on usage in main feature.

setCavityDepth(String) - Method in interface nxopen.die.ThroatChildBuilder

License requirements: ug_die_design ("Die Design")
.

setCavityOffset(String) - Method in interface nxopen.die.ThroatChildBuilder

License requirements: ug_die_design ("Die Design")
.

setCAxis(double) - Method in interface nxopen.cam.AlongMachineAxisMoveBuilder

License requirements: None.

setCellFormatType(TableCellStyleBuilder.CellFormatTypes) - Method in interface nxopen.annotations.TableCellStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setCellNoValue(int, int) - Method in interface nxopen.GeneralScalarTable

Sets cell as having no value
License requirements: None.

setCellPrefs(Tag, UFTabnot.CellPrefs) - Method in interface nxopen.uf.UFTabnot

Refer to UF_TABNOT_set_cell_prefs for documentation.

setCellText(Tag, String) - Method in interface nxopen.uf.UFTabnot

Refer to UF_TABNOT_set_cell_text for documentation.

setCellValue(int, int, double) - Method in interface nxopen.GeneralScalarTable

Sets cell value
License requirements: None.

setCellValue(int, int, int) - Method in interface nxopen.GeneralScalarTable

Sets cell value
License requirements: None.

setCellValueForLabel(String, String) - Method in interface nxopen.annotations.EditTitleBlockBuilder

Sets the value of the cell for given label.

setCellWidth(int) - Method in interface nxopen.blockstyler.DoubleTable

License requirements: None.

setCenter(ILocation) - Method in interface nxopen.die.HandlingCoreChildBuilder

Sets the center of the handling core.

setCenter(ILocation) - Method in interface nxopen.die.HoleChildBuilder

Sets the center of the die hole.

setCenter(Tag, double) - Method in interface nxopen.uf.UFView

Refer to UF_VIEW_set_center for documentation.

setCenter(boolean) - Method in interface nxopen.uistyler.Attachment

Sets whether the dialog item is at the center
License requirements: None.

setCenterAndRadius(Point2d, double) - Method in interface nxopen.markup.Circle

Sets center and radius
License requirements: None.

setCenterAndRadius(Point2d, double, double) - Method in interface nxopen.markup.Ellipse

Sets center and radius
License requirements: None.

setCenterCross(double) - Method in interface nxopen.annotations.OffsetCenterPointBuilder

License requirements: drafting ("DRAFTING")
.

setCenterCsys(CoordinateSystem) - Method in interface nxopen.cae.BoundingVolumeBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setCenterCurve(boolean) - Method in interface nxopen.cam.FlowBuilder

License requirements: None.

setCenterCurveDirectionReversed(boolean) - Method in interface nxopen.features.StyledBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setCenterCurveUsedAsSpine(boolean) - Method in interface nxopen.features.StyledBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setCenterHole(boolean) - Method in interface nxopen.die.PadChildBuilder

Sets the center hole switch of the die pad, if true the center hole will be created in the pad, if false it will not.

setCenterHole(boolean) - Method in interface nxopen.die.PadParentBuilder

Sets the center hole switch of die pads, if true the center hole will be created in the pads, if false they will not.

setCenteringMarkExtension(double) - Method in interface nxopen.drawings.BordersAndZonesBuilder

Deprecated.

Deprecated in NX10.0.0. Use SheetBorderSettingsBuilder.centeringMarksExtension() instead.

setCenteringMarkLength(double) - Method in interface nxopen.drawings.SheetBorderSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setCenteringMarksExtension(double) - Method in interface nxopen.drawings.SheetBorderSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setCenteringMarksHorizontal(HorizontalCenteringMarkType) - Method in interface nxopen.drawings.SheetBorderSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setCenteringMarksVertical(VerticalCenteringMarkType) - Method in interface nxopen.drawings.SheetBorderSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setCenterLengthAndWidth(Point2d, double, double) - Method in interface nxopen.markup.Rectangle

Sets center length and width
License requirements: None.

setCenterline(boolean) - Method in interface nxopen.annotations.BaseFrameBarBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setCenterline(DirectionOption, IProfile[]) - Method in interface nxopen.die.RibChildBuilder

Sets the centerline of the rib.

setCenterline(Plane) - Method in interface nxopen.features.shipdesign.HullBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setCenterlineCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use TrackDrawingChangesReportFilterBuilder.setReportFilterStatus(nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter, boolean) instead.

setCenterlineCurve(boolean) - Method in interface nxopen.features.AestheticFaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setCenterlineCycle(CenterlineDrillTurningBuilder.CycleTypes) - Method in interface nxopen.cam.CenterlineDrillTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setCenterlineJigOnPlane(JigOnPlaneBuilder) - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setCenterlineLength(String) - Method in interface nxopen.tooling.WireHoleBuilder

License requirements: None.

setCenterlineProjection(DrawBeadBuilder.ProjectionDirectionTypes) - Method in interface nxopen.die.DrawBeadBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setCenterlines(boolean) - Method in interface nxopen.drawings.GeneralViewStyle

The status of center line, if true automatically creates linear, cylindrical, and bolt circle centerlines (with a circular instance set) for views where the hole or pin axis is perpendicular or parallel to the plane of the drawing view.

setCenterLines(boolean) - Method in interface nxopen.drawings.ViewCreationWizardBuilder

License requirements: drafting ("DRAFTING")
.

setCenterlines(boolean) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder

License requirements: drafting ("DRAFTING")
.

setCenterlines(boolean) - Method in interface nxopen.preferences.GeneralViewPreferences

Sets the status of center line.

setCenterlineSlotCreate(boolean) - Method in interface nxopen.die.DieShoeBuilder

License requirements: ug_die_design ("Die Design")
.

setCenterlineSymbolCfw(LineCfw) - Method in interface nxopen.annotations.SymbolPreferences

Sets the centerline symbol color, font, and width
License requirements: None.

setCenterlineSymbolColor(NXColor) - Method in interface nxopen.annotations.SymbolStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setCenterlineSymbolWidth(LineWidth) - Method in interface nxopen.annotations.SymbolStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setCenterlineXyOffset(double) - Method in interface nxopen.die.RibChildBuilder

Sets the centerline xy offset of the die rib.

setCenterlineXyOffset(double) - Method in interface nxopen.die.RibParentBuilder

Sets the centerline xy offset of die ribs.

setCenterlineYLabelColor(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setCenterlineYLabelFont(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setCenterlineYLabelItalicized(boolean) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setCenterlineYLabelWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setCenterlineYTicColor(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setCenterlineYTicDisplay(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setCenterlineYTicFont(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setCenterlineYTicLength(double) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setCenterlineYTicWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setCenterOfGravity(boolean) - Method in interface nxopen.features.SectionInertiaAnalysisBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setCenterOption(AestheticFaceBlendBuilder.CenterType) - Method in interface nxopen.features.AestheticFaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setCenterPoint(Point) - Method in interface nxopen.cae.BoundingVolumeBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setCenterPoint(Point) - Method in interface nxopen.cam.CircularAboutAxisMoveBuilder

License requirements: None.

setCenterPoint(Point) - Method in interface nxopen.cam.LaserCutoutDefinition

License requirements: cam_base ("CAM BASE")
.

setCenterPoint(Point) - Method in interface nxopen.features.BlendCornerBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setCenterPoint(Point) - Method in interface nxopen.features.OffsetEmbossBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setCenterPoint() - Method in interface nxopen.features.OvercrownBuilder

Sets the point in forming region.

setCenterPoint(Point) - Method in interface nxopen.features.SphereBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setCenterPoint(Point) - Method in interface nxopen.features.StudioXformBuilder

Deprecated.

Deprecated in NX8.5.0. Use StudioXformBuilderEx instead.

setCenterPoint(Point) - Method in interface nxopen.mechatronics.CollisionShapeBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setCenterPoint(Point) - Method in interface nxopen.mechatronics.TransportSurfaceBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setCenterPoint(Point) - Method in interface nxopen.SketchEllipseBuilder

License requirements: None.

setCenterPoint(Point) - Method in interface nxopen.SketchPolygonBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setCenterPointOption(PierceTaskBuilder.CenterPointOptionTypes) - Method in interface nxopen.die.PierceTaskBuilder

Sets the center point output option of the pierce task
License requirements: die_engineering ("DIE ENGINEERING")
.

setCenterPointReference(AssociativeArcBuilder.CenterReference) - Method in interface nxopen.features.AssociativeArcBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setCenterPointX(double) - Method in interface nxopen.cam.InspectionArcFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setCenterPointX(double) - Method in interface nxopen.cam.InspectionCircleFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setCenterPointX(double) - Method in interface nxopen.cam.InspectionSphereFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setCenterPointX(double) - Method in interface nxopen.cam.InspectionTorusFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setCenterPointY(double) - Method in interface nxopen.cam.InspectionArcFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setCenterPointY(double) - Method in interface nxopen.cam.InspectionCircleFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setCenterPointY(double) - Method in interface nxopen.cam.InspectionSphereFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setCenterPointY(double) - Method in interface nxopen.cam.InspectionTorusFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setCenterPointZ(double) - Method in interface nxopen.cam.InspectionArcFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setCenterPointZ(double) - Method in interface nxopen.cam.InspectionCircleFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setCenterPointZ(double) - Method in interface nxopen.cam.InspectionSphereFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setCenterPointZ(double) - Method in interface nxopen.cam.InspectionTorusFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setCenterRadiusLockedPlaneDirection(Vector3d) - Method in interface nxopen.features.AssociativeArcBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setCenterSymbol(boolean) - Method in interface nxopen.annotations.LineWeldData

Sets the flag indicating whether the weld symbol is at center of reference line, applicable only to spot and seam symbols
License requirements: None.

setCgmflBrsr(String) - Method in interface nxopen.formboard.FaceAnnotationBuilder

License requirements: routing_harness ("Routing Harness")
.

setCgmSizeMode(int, double[]) - Method in interface nxopen.uf.UFStd

Deprecated.

The equivalent Open C method has retired

setChainableCurveTypes(RoutingPath.CurveType[]) - Method in interface nxopen.preferences.RoutingPath

License requirements: routing_base ("Routing Basic")
.

setChainElementIndex(int) - Method in interface nxopen.sim.SinumerikCaExportBuilder

License requirements: nx_sinumerik_ca ("Sinumerik Collision Avoidance")
.

setChaining(BendTaperBuilder.ChainingType) - Method in interface nxopen.features.sheetmetal.BendTaperBuilder

Deprecated.

Deprecated in NX8.5.0. Use BendTaperBuilder.webTaperType1() and BendTaperBuilder.setWebTaperType1(nxopen.features.sheetmetal.BendTaperBuilder.WebTaperType) and BendTaperBuilder.webTaperType2() and BendTaperBuilder.setWebTaperType2(nxopen.features.sheetmetal.BendTaperBuilder.WebTaperType) instead.

setChainingTolerance(double) - Method in interface nxopen.features.ExtrudeBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setChainingTolerance(double) - Method in interface nxopen.features.SweepAlongGuideBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setChainingTolerance(double) - Method in interface nxopen.Section

License requirements: gateway ("UG GATEWAY")
.

setChainOffset(double) - Method in interface nxopen.annotations.DimensionPreferences

Sets the offset between dimension lines of chain dimensions
License requirements: None.

setChainOffset(double) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setChainWithinFeature(boolean) - Method in interface nxopen.blockstyler.SectionBuilder

License requirements: None.

setChainWithinFeature(boolean) - Method in interface nxopen.blockstyler.SuperSection

License requirements: None.

setChamferBothSides(boolean) - Method in interface nxopen.features.shipdesign.PlateChamferBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setChamferDimensionData(Tag, UFDrf.ChamferDimensionData) - Method in interface nxopen.uf.UFDrf

Refer to UF_DRF_set_chamfer_dimension_data for documentation.

setChamferDimensionPreferences(ChamferDimensionPreferences) - Method in interface nxopen.annotations.DimensionPreferences

Sets the chamfer dimension preferences
License requirements: None.

setChamferDistance(double) - Method in interface nxopen.die.FlangeSteelRibChildBuilder

Sets the chamfer distance of the Flange Steel Rib
License requirements: ug_die_design ("Die Design")
.

setChamferDistance(double) - Method in interface nxopen.die.FlangeSteelRibParentBuilder

Sets the chamfer distance of the Flange Steel Ribs
License requirements: ug_die_design ("Die Design")
.

setChamferEnabled(boolean) - Method in interface nxopen.features.CurveFinderBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setChamferForm(ChamferForm) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setChamferLeaderType(ChamferLeaderPlacement) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setChamferOffset(double) - Method in interface nxopen.cam.ChamferMillingBuilder

License requirements: cam_base ("CAM BASE")
.

setChamferOption(SketchChamferBuilder.ChamferOptions) - Method in interface nxopen.SketchChamferBuilder

License requirements: drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setChamferOrientation(ChamferOrientationType) - Method in interface nxopen.annotations.BaseChamferDimension

Sets a value of chamfer dimension linear leader parallel
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setChamferReference(ChamferMillingBuilder.ChamferReferenceType) - Method in interface nxopen.cam.ChamferMillingBuilder

License requirements: cam_base ("CAM BASE")
.

setChamferSeparator(ChamferSeparatorType) - Method in interface nxopen.annotations.DimensionStyleBuilder

Sets the chamfer separator type
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setChamferSpaceFactor(double) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setChamferStubType(ChamferStubType) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setChamferSymbolName(String) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setChamferSymbolType(ChamferSymbolPlacement) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setChamferType(ResizeChamferBuilder.SectionType) - Method in interface nxopen.features.ResizeChamferBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setChangeAllBoundaryConstraints(boolean) - Method in interface nxopen.features.StyledCornerBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setChangeAllSizes(boolean) - Method in interface nxopen.tooling.EnlargeSurfaceBuilder

License requirements: None.

setChangeApproachRetract(boolean) - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setChangeBoxSize(boolean) - Method in interface nxopen.tooling.TrimSolidBuilder

License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setChangeComponentVisibility(boolean) - Method in interface nxopen.assemblies.ConstraintDisplayBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setChangeoverName(String) - Method in interface nxopen.tooling.ChangeoverManagementBuilder

License requirements: None.

setChangeProbeAngles(boolean) - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setChangeProbeTip(boolean) - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setChangeSymbolSize(double) - Method in interface nxopen.drawings.TrackDrawingChangesGeneralBuilder

License requirements: drafting ("DRAFTING")
.

setChangeSymbolType(TrackDrawingChangesGeneralBuilder.SymbolType) - Method in interface nxopen.drawings.TrackDrawingChangesGeneralBuilder

License requirements: drafting ("DRAFTING")
.

setChangeTipOrientations(boolean) - Method in interface nxopen.tooling.DieEngDieTipBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setChangeTipOrigin(boolean) - Method in interface nxopen.tooling.DieEngDieTipBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setChangeViewOrientation(boolean) - Method in interface nxopen.preferences.SessionSketch

Sets the change view orientation flag.

setChangeViewOrientation(boolean) - Method in interface nxopen.weld.WeldFillBuilder

License requirements: ugweld ("UG WELD")
.

setChangeWallThickness(boolean) - Method in interface nxopen.features.StepBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setChannel(UFVariant, int) - Method in interface nxopen.uf.UFSim

Refer to UF_SIM_set_channel for documentation.

setChannelColor(NXColor) - Method in interface nxopen.tooling.SpecifyBaffleBuilder

License requirements: ug_mold_design ("UG MOLD")
.

setChannelColor(double, double, double) - Method in interface nxopen.tooling.SpecifyBaffleBuilder

Deprecated.

Deprecated in NX8.5.0. Use Tooling.SpecifyBaffleBuilder#setChannelColor instead.

setChannelColor(NXColor) - Method in interface nxopen.tooling.SpecifyCircuitBuilder

License requirements: ug_mold_design ("UG MOLD")
.

setChannelDiameter(double) - Method in interface nxopen.tooling.CoolingDefineChannelBuilder

License requirements: None.

setChannelDiameter(double) - Method in interface nxopen.tooling.CoolingPatternBuilder

License requirements: None.

setChannelName(String) - Method in interface nxopen.cam.MachinePocketGroupBuilder

License requirements: cam_base ("CAM BASE")
.

setChannelName(String) - Method in interface nxopen.cam.MachineTurretGroupBuilder

License requirements: cam_base ("CAM BASE")
.

setChannelName(String) - Method in interface nxopen.cam.OperationBuilder

License requirements: cam_base ("CAM BASE")
.

setChannelName(String) - Method in interface nxopen.cam.ToolBuilder

License requirements: cam_base ("CAM BASE")
.

setChannelPlaneMill(String, MachineToolConfiguration.PlaneTypes) - Method in interface nxopen.sim.MachineToolConfiguration

Sets the plane mill for a channel
License requirements: None.

setChannelPlaneTurn(String, MachineToolConfiguration.PlaneTypes) - Method in interface nxopen.sim.MachineToolConfiguration

Sets the plane turn for a channel
License requirements: None.

setChannelSwiveling(String, MachineToolConfiguration.SwivelingTypes) - Method in interface nxopen.sim.MachineToolConfiguration

Sets the channel's swiveling mode
License requirements: None.

setChannelTcpmSupport(String, boolean) - Method in interface nxopen.sim.MachineToolConfiguration

Sets the TCPM support value
License requirements: None.

setChannelToolAsSubprogram(String, boolean) - Method in interface nxopen.sim.MachineToolConfiguration

Sets a channel's subprogram support
License requirements: None.

setChannelToolCommand(String, String) - Method in interface nxopen.sim.MachineToolConfiguration

Sets a channel's tool command
License requirements: None.

setChannelToolPreselect(String, String) - Method in interface nxopen.sim.MachineToolConfiguration

Sets a channel's tool preselect
License requirements: None.

setChannelType(String) - Method in interface nxopen.tooling.SpecifyBaffleBuilder

License requirements: ug_mold_design ("UG MOLD")
.

setCharacteristic(FeatureControlFrameBuilder.FcfCharacteristic) - Method in interface nxopen.annotations.FeatureControlFrameBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setCharacteristic(String, int) - Method in interface nxopen.routing.CharacteristicList

Sets the value of an integer characteristic associated with the input name.

setCharacteristic(String, double) - Method in interface nxopen.routing.CharacteristicList

Sets the value of an real characteristic associated with the input name.

setCharacteristic(String, String) - Method in interface nxopen.routing.CharacteristicList

Sets the value of an string characteristic.

setCharacteristic(String, String, NXObject.AttributeType) - Method in interface nxopen.routing.CharacteristicList

Sets the value of a string or reference characteristic.

setCharacteristic(String, int) - Method in interface nxopen.routing.ICharacteristic

Deprecated.

Deprecated in NX11.0.0. Use ICharacteristic.setCharacteristic2(java.lang.String, int) instead.

setCharacteristic(String, double) - Method in interface nxopen.routing.ICharacteristic

Deprecated.

Deprecated in NX11.0.0. Use ICharacteristic.setCharacteristic2(java.lang.String, int) instead.

setCharacteristic(String, String) - Method in interface nxopen.routing.ICharacteristic

Deprecated.

Deprecated in NX11.0.0. Use ICharacteristic.setCharacteristic2(java.lang.String, int) instead.

setCharacteristic(Tag, UFGdt.Characteristic) - Method in interface nxopen.uf.UFGdt

Refer to UF_GDT_set_characteristic for documentation.

setCharacteristic2(String, int) - Method in interface nxopen.routing.ICharacteristic

Sets or creates an integer type attribute associated with the input title.

setCharacteristic2(String, double) - Method in interface nxopen.routing.ICharacteristic

Sets or creates a double type attribute associated with the input title.

setCharacteristic2(String, String) - Method in interface nxopen.routing.ICharacteristic

Sets or creates a string type type attribute associated with the input title.

setCharacteristics(CharacteristicList) - Method in interface nxopen.routing.ICharacteristic

Deprecated.

Deprecated in NX11.0.0. Use ICharacteristic.setCharacteristics2(nxopen.routing.CharacteristicList) instead.

setCharacteristics(CharacteristicList) - Method in interface nxopen.routing.Run

Set all of the characteristics values on this object.

setCharacteristics(String, WeldAttribType, String) - Method in interface nxopen.weld.WeldPointBuilder

Set or edit characteristics for selected points
License requirements: ugweld ("UG WELD")
.

setCharacteristics2(CharacteristicList) - Method in interface nxopen.routing.ICharacteristic

Sets all attributes associated with the titles from the input list, creating new attributes for the ones that don't exist already.

setCharacteristicType(SearchCriteriaFeatureControlFrameBuilder.CharacteristicOptions) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

License requirements: None.

setCharacterSize(double) - Method in interface nxopen.PlotBuilder

License requirements: None.

setCharacterSize(double) - Method in interface nxopen.preferences.PartVisualizationNamesBorders

Sets the character size.

setCharacterSpacing(double) - Method in interface nxopen.annotations.ChamferDimensionPreferences

Sets the space between the text characters or symbols as a factor of the character size
License requirements: None.

setCharactersToSkip(String) - Method in interface nxopen.annotations.HoleTableSettingsLabelBuilder

License requirements: drafting ("DRAFTING")
.

setCharToSkip(String) - Method in interface nxopen.annotations.PartsListBuilder

License requirements: None.

setChasePasses(int) - Method in interface nxopen.cam.ThreadCutParameters

License requirements: cam_base ("CAM BASE")
.

setChassisCsys(CoordinateSystem) - Method in interface nxopen.motion.TireBuilder

License requirements: mechanisms ("MECHANISMS")
.

setChassisPoint(Point) - Method in interface nxopen.motion.TireBuilder

License requirements: mechanisms ("MECHANISMS")
.

setCheck(ExamineSteelFeatureBuilderCheck, boolean) - Method in interface nxopen.features.shipdesign.ExamineSteelFeatureBuilder

Set the flag to indicate whether or not to examine the specific object type.

setCheck(ExamineGeometry.Check) - Method in interface nxopen.geometricanalysis.ExamineGeometry

Set a specified type of check for examine geometry
License requirements: None.

setCheck - Variable in class nxopen.uistyler.OptionToggle.ItemValueData

setCheckAllComponents(boolean) - Method in interface nxopen.cae.modelcheck.ModelSetupCheckBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setCheckBoundaryCondition(boolean) - Method in interface nxopen.cae.optimization.TBSShapeRestrictAreaBuilder

License requirements: cae_opt_toposhape ("NX Shape Optimization")
.

setCheckCircularReference(boolean) - Method in interface nxopen.features.shipdesign.ValidateModelBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setCheckClearance(boolean) - Method in interface nxopen.features.sheetmetal.AeroLighteningCutoutBuilder

License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setCheckClearance(boolean) - Method in interface nxopen.features.sheetmetal.LighteningCutoutBuilder

License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setCheckCollision(boolean) - Method in interface nxopen.tooling.RunSimulationBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setCheckColor(NXColor) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setCheckCriteriaAngle(double) - Method in interface nxopen.geometricanalysis.ExamineGeometry

License requirements: None.

setCheckCriteriaDistance(double) - Method in interface nxopen.geometricanalysis.ExamineGeometry

License requirements: None.

setCheckDof(boolean) - Method in interface nxopen.cae.optimization.TBSShapeRestrictAreaBuilder

License requirements: cae_opt_toposhape ("NX Shape Optimization")
.

setCheckElementGroup(boolean) - Method in interface nxopen.cae.optimization.TBSShapeRestrictAreaBuilder

License requirements: cae_opt_toposhape ("NX Shape Optimization")
.

setCheckElementSizeOption(boolean) - Method in interface nxopen.cae.Mesh3dTetBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setCheckers(WeldAdvisorCheckerType[]) - Method in interface nxopen.weld.WeldAdvisorBuilder

Sets the checkers be executed
License requirements: ugweld ("UG WELD")
.

setCheckFluteLength(boolean) - Method in interface nxopen.cam.HoleMakingBuilder

License requirements: cam_base ("CAM BASE")
.

setCheckForDuplicates(boolean) - Method in interface nxopen.routing.TransformPathBuilder

Sets the flag that indicates whether or not to check for duplicate segments after the copy or transform.

setCheckFreeEdges(boolean) - Method in interface nxopen.cae.modelcheck.ElementEdgeCheckBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setCheckGeometryToggle(boolean) - Method in interface nxopen.tooling.MWDefineSheetsBuilder

License requirements: None.

setCheckingG2Continuity(boolean) - Method in interface nxopen.mechatronics.CamProfileBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setCheckingType(TBSTopologyRestrictAreaBuilder.CheckTypeOption) - Method in interface nxopen.cae.optimization.TBSTopologyRestrictAreaBuilder

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setCheckIpwCollisions(boolean) - Method in interface nxopen.cam.CutParameters

License requirements: cam_base ("CAM BASE")
.

setCheckLabelConflicts(boolean) - Method in interface nxopen.cae.modelcheck.ModelSetupCheckBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setCheckLimitViolation(boolean) - Method in interface nxopen.cam.SimulationOptionsBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setCheckLinkCondition(boolean) - Method in interface nxopen.cae.optimization.TBSShapeRestrictAreaBuilder

License requirements: cae_opt_toposhape ("NX Shape Optimization")
.

setCheckMaximumGrowValue(boolean) - Method in interface nxopen.cae.optimization.TBSShapeRestrictAreaBuilder

License requirements: cae_opt_toposhape ("NX Shape Optimization")
.

setCheckMaximumShrinkValue(boolean) - Method in interface nxopen.cae.optimization.TBSShapeRestrictAreaBuilder

License requirements: cae_opt_toposhape ("NX Shape Optimization")
.

setCheckName(String) - Method in interface nxopen.validate.RequirementCheck

License requirements: None.

setCheckNeck(boolean) - Method in interface nxopen.cam.CutDepthChecker

License requirements: cam_base ("CAM BASE")
.

setCheckNewerRevisionsOfTemplatePart(boolean) - Method in interface nxopen.preferences.SessionAssemblies

Sets the check for newer revisions of template part option
License requirements: None.

setCheckNonManifoldEdges(boolean) - Method in interface nxopen.cae.modelcheck.ElementEdgeCheckBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setCheckOrientation(ElementMaterialOrientationCheckBuilder.MaterialOrientationType, boolean) - Method in interface nxopen.cae.modelcheck.ElementMaterialOrientationCheckBuilder

Sets option value which indicates whether to check for the specified material orientation type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setCheckOverlappingToggle(boolean) - Method in interface nxopen.tooling.MWDefineSheetsBuilder

License requirements: None.

setCheckPartGeometryBeyondTrim(boolean) - Method in interface nxopen.cam.TrimPoint

License requirements: cam_base ("CAM BASE")
.

setCheckPlateIntersectedPlate(boolean) - Method in interface nxopen.features.shipdesign.ValidateModelBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setCheckPlateIntersectedStiffener(boolean) - Method in interface nxopen.features.shipdesign.ValidateModelBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setCheckResult(Validation.Result) - Method in interface nxopen.Validation

Set the result of validation.

setCheckSelection(Preferences.CheckSelectionTypes) - Method in interface nxopen.cam.Preferences

Deprecated.

Deprecated in NX8.0.0. Use CAM.Preferences#getSelection and CAM.Preferences#setSelection instead.

setCheckStatus(boolean) - Method in interface nxopen.shipdesign.NavigatorNode

License requirements: nx_ship_basic ("Ship Basic Design")
.

setCheckStiffenerIntersectedStiffener(boolean) - Method in interface nxopen.features.shipdesign.ValidateModelBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setCheckStock(double) - Method in interface nxopen.cam.GeometrySet

License requirements: cam_base ("CAM BASE")
.

setCheckSurfaces(boolean) - Method in interface nxopen.features.GuidedExtensionBuilderEx

License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setCheckSurfaces(boolean) - Method in interface nxopen.tooling.GuidedExtensionBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING")
.

setCheckToolAboveBall(boolean) - Method in interface nxopen.cam.SurfaceContourBuilder

License requirements: None.

setCheckToolAndHolder(boolean) - Method in interface nxopen.cam.GougeCheckBuilder

License requirements: cam_base ("CAM BASE")
.

setCheckToolHolder(boolean) - Method in interface nxopen.cam.SimulationOptionsBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setCheckToolLength(boolean) - Method in interface nxopen.cam.HoleMakingBuilder

License requirements: cam_base ("CAM BASE")
.

setCheckType(ValidCheckBuilder.CheckingType) - Method in interface nxopen.tooling.ValidCheckBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setCheckUnconnectedComponent(boolean) - Method in interface nxopen.cae.modelcheck.ModelSetupCheckBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setCheckZoneRadius(WeldAdvisorCustomerDefault, double) - Method in interface nxopen.weld.WeldAdvisorBuilder

The weld advisor parameter Check Zone Radius
License requirements: ugweld ("UG WELD")
.

setChildCheckerEnabledFlag(String, boolean) - Method in interface nxopen.validate.CheckerNode

Sets enable flag of child checker instance in a profile checker.

setChildCheckerEnabledFlags(String[], boolean[]) - Method in interface nxopen.validate.CheckerNode

Sets child checker enable flags in a profile checker.

setChildComponentsForComponents(boolean) - Method in interface nxopen.layout2d.ExportComponentHierarchyBuilder

License requirements: nx_layout ("NX Layout")
.

setChildComponentsForDefinitions(boolean) - Method in interface nxopen.layout2d.ExportComponentHierarchyBuilder

License requirements: nx_layout ("NX Layout")
.

setChildHic1000OutputColor(NXColor) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setChildHic1000OutputFont(PedestrianProtectionBuilder.Font) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setChildHic1000OutputLayer(int) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setChildHic1000OutputWidth(PedestrianProtectionBuilder.Width) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setChildHic1700OutputColor(NXColor) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setChildHic1700OutputFont(PedestrianProtectionBuilder.Font) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setChildHic1700OutputLayer(int) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setChildHic1700OutputWidth(PedestrianProtectionBuilder.Width) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setChildMembers(UIBlock, UIBlock[]) - Method in interface nxopen.blockstyler.Explorer

Sets the parent member for the child members in the Explorer Navigation Tree.

setChildren(NXObject[]) - Method in interface nxopen.mechatronics.FunctionObjectBuilder

Sets the children
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setChildrenGeomAssociation(boolean) - Method in interface nxopen.cae.ManualNodeAssociationBuilder

License requirements: None.

setChildRevisionOption(AssembliesChildRevisionOptions) - Method in interface nxopen.assemblies.WaveQuery

Specifies what child revisions to fetch from Teamcenter
License requirements: wave ("WAVE FUNCTIONALITY")
.

setChipRemovalIncrementType(CenterlineDrillTurningBuilder.RemovalIncrementTypes) - Method in interface nxopen.cam.CenterlineDrillTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setChoice(SuppressHoleBuilder.OptionChoice) - Method in interface nxopen.cae.SuppressHoleBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setChoice(BlendStopshortBuilder.Choices) - Method in interface nxopen.geometricutilities.BlendStopshortBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setChooseOptimalMethod(DieEngDefineProductOrientationBuilder.OptimalMethod) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setChordal(double) - Method in interface nxopen.ListCreator

License requirements: None.

setChordalOption(JtCreator.ChordalValue) - Method in interface nxopen.JtCreator

License requirements: None.

setChordalTolerance(double) - Method in interface nxopen.cam.SimulationOptionsBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setChordalTolerance(double) - Method in interface nxopen.features.SectionCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setChordalTolerance(double) - Method in interface nxopen.features.shipdesign.PlateChamferBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setChuckType(ElectrodeComponentBuilder.Chuck) - Method in interface nxopen.tooling.ElectrodeComponentBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setCi(String, UFClone.CheckinData) - Method in interface nxopen.uf.UFClone

Refer to UF_CLONE_set_ci for documentation.

setCiCommentChecking(String, boolean, String) - Method in interface nxopen.uf.UFClone

Refer to UF_CLONE_set_ci_comment_checking for documentation.

setCirCavityNumber(int) - Method in interface nxopen.tooling.LayoutBuilder

License requirements: None.

setCircDeleteAllComponents(boolean) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder

License requirements: None.

setCircleCenter(Point) - Method in interface nxopen.tooling.WireHoleBuilder

License requirements: None.

setCircleU(boolean) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setCircleUType(SearchCriteriaFeatureControlFrameBuilder.CircleUOptions) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

License requirements: None.

setCircleUvalue(String) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setCircleUValue(double) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

License requirements: None.

setCircleUValueType(SearchModelViewBuilder.ValueComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

License requirements: None.

setCircuitColor(NXColor) - Method in interface nxopen.tooling.SpecifyCircuitBuilder

License requirements: ug_mold_design ("UG MOLD")
.

setCircuitColor(double[]) - Method in interface nxopen.tooling.SpecifyCircuitBuilder

Sets the circuit color.

setCircular(boolean) - Method in interface nxopen.drawings.ViewStyleDetailBuilder

License requirements: drafting ("DRAFTING")
.

setCircularBoundary(boolean) - Method in interface nxopen.preferences.DetailViewPreferences

Sets the circular boundary option.

setCircularMotion(int, PathCircularMotion) - Method in interface nxopen.cam.Path

Updates the data of the circular motion event at the given index
License requirements: None.

setCircularOperation(InsertAuxiliaryBuilder.CircOperationTypes) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder

License requirements: None.

setCircularOrientationOption(PatternOrientation.Enum) - Method in interface nxopen.geometricutilities.PatternOrientation

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setCircularOrNonCircular(BurringInsertBuilder.CircularOrNonCircularType) - Method in interface nxopen.tooling.BurringInsertBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setCircularPrecision(String, double) - Method in interface nxopen.sim.MachineToolConfiguration

Sets the circular precision
License requirements: None.

setCircularPrecisionFactor(String, double) - Method in interface nxopen.sim.MachineToolConfiguration

Sets the circular precision factor
License requirements: None.

setCircularScan(boolean) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setCircularSegments(int) - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilder

Deprecated.

Deprecated in NX11.0.0. Use SubdivisionPrimitiveShapeBuilderEx instead.

setCircularSegments(int) - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilderEx

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setCircularSlugHole(boolean) - Method in interface nxopen.die.PierceHoleChildBuilder

Sets the circular slug hole switch of the pierce hole
License requirements: ug_die_design ("Die Design")
.

setCircularSlugHole(boolean) - Method in interface nxopen.die.PierceHoleParentBuilder

Sets the circular slug hole switch of pierce holes
License requirements: ug_die_design ("Die Design")
.

setCircularTypeMode(SectionSurfaceBuilderEx.CircularType) - Method in interface nxopen.features.SectionSurfaceBuilderEx

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setCircularVector(Direction) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder

License requirements: None.

setCirRadius(double) - Method in interface nxopen.tooling.LayoutBuilder

License requirements: None.

setCirRotateAngle(double) - Method in interface nxopen.tooling.LayoutBuilder

License requirements: None.

setCirStartAngle(double) - Method in interface nxopen.tooling.LayoutBuilder

License requirements: None.

setClass4gd(UserDefinedWeldBuilder.WeldTypes) - Method in interface nxopen.weld.UserDefinedWeldBuilder

License requirements: ugweld ("UG WELD")
.

setClassId(String) - Method in interface nxopen.mechatronics.SelectClassificationBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setClassification(ManikinBuilder.ClassificationType) - Method in interface nxopen.features.vehicledesign.ManikinBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setClassification(KinematicJunctionBuilder.SystemClass) - Method in interface nxopen.sim.KinematicJunctionBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder") OR resource_manager_nx ("Teamcenter Resource Manager")
.

setClassificationObjectIdentifier(String) - Method in interface nxopen.mechanicalrouting.PartPlacementBuilder

Sets the identifier of the classification object associated with the part to place
License requirements: routing_base ("Routing Basic")
.

setClassificationObjectIdentifier(String) - Method in interface nxopen.mechanicalrouting.PathStockPreferenceBuilder

Sets the identifier of the classification object associated with the part to place
License requirements: routing_base ("Routing Basic")
.

setClassificationObjectIdentifierOfPartToPostPlace(String) - Method in interface nxopen.mechanicalrouting.PartPlacementBuilder

Sets the identifier of the classification object associated with the part to be post placed.

setClassifiedFeatures(Tag, UFVariant, int) - Method in interface nxopen.uf.UFFbmGeom

Refer to UF_FBM_GEOM_set_classified_features for documentation.

setClassifierTypeOfRule(Rule, Classifier.TypeOption) - Method in interface nxopen.visualreporting.VisualReportBuilder

Sets the reporting Classifier.TypeOption for the active Classifier in this Rule .

setClassName(String) - Method in interface nxopen.validate.CheckerNode

License requirements: None.

setClassType(Class) - Method in class nxopen.uf.UFVariant

setClause(String) - Method in interface nxopen.NavigatorFilter

Sets the clause of NavigatorFilter
License requirements: None.

setCleanBody(boolean) - Method in interface nxopen.features.OptimizeFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setCleanup(RoughTurningBuilder.CleanupTypes) - Method in interface nxopen.cam.RoughTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setCleanUp(boolean) - Method in interface nxopen.facet.ConvertFacetBodyBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setCleanUp(boolean) - Method in interface nxopen.facet.STLImportBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setCleanupAssemblyConstraints(boolean) - Method in interface nxopen.PartCleanup

Sets the option that specifies whether to cleanup assembly constraints.

setCleanupCAMObjects(boolean) - Method in interface nxopen.PartCleanup

Sets the option that specifies whether to delete or fix any corrupt internal CAM objects.

setCleanupControl(CutParametersCleanupControlTypes) - Method in interface nxopen.cam.TurnCutParameters

License requirements: cam_base ("CAM BASE")
.

setCleanupDraftingObjects(boolean) - Method in interface nxopen.PartCleanup

Sets the option that specifies whether to perform drafting cleanup.

setCleanupFeatureData(boolean) - Method in interface nxopen.PartCleanup

Sets the option that specifies whether to perform solid cleanup.

setCleanupMatingData(boolean) - Method in interface nxopen.PartCleanup

Sets the option that specifies whether to cleanup mating data.

setCleanupPasses(boolean) - Method in interface nxopen.cam.CylinderMillingBuilder

License requirements: cam_base ("CAM BASE")
.

setCleanupRoutingData(boolean) - Method in interface nxopen.PartCleanup

Sets the option which determines if the routing part cleanup option should be performed.

setCleanupType(BoundaryTurnMemberFineFinishCorner.Cleanup) - Method in interface nxopen.cam.BoundaryTurnMemberFineFinishCorner

License requirements: cam_base ("CAM BASE")
.

setCleanupType(SurfaceContourBuilder.CleanupTypes) - Method in interface nxopen.cam.SurfaceContourBuilder

License requirements: cam_base ("CAM BASE")
.

setClearance(double) - Method in interface nxopen.die.HandlingCoreChildBuilder

Sets the clearance of the handling core.

setClearance(double) - Method in interface nxopen.die.HandlingCoreParentBuilder

Sets the clearance of handling cores.

setClearance(double) - Method in interface nxopen.die.PressureSystemChildBuilder

Sets the clearance of the pressure system.

setClearance(double) - Method in interface nxopen.die.PressureSystemParentBuilder

Sets the clearance of pressure systems.

setClearance(double) - Method in interface nxopen.die.TrimFlangeDieAssistantBuilder

License requirements: ug_die_design ("Die Design")
.

setClearance(AeroJoggleBuilder.SideType, String) - Method in interface nxopen.features.sheetmetal.AeroJoggleBuilder

Set the clearance expression.

setClearance(double) - Method in interface nxopen.motion.PackagingInterferenceBuilder

Deprecated.

Deprecated in NX8.5.0. Obtion the exression using PackagingInterferenceBuilder.clearanceExpression() to query or edit it.

setClearance(double) - Method in interface nxopen.tooling.ReliefDesignBuilder

License requirements: None.

setClearanceAutoSet(boolean) - Method in interface nxopen.tooling.StockSizeBuilder

License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setClearanceBetween(ClearanceAnalysisBuilder.ClearanceBetweenEntity) - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setClearanceCoefficient(double) - Method in interface nxopen.tooling.DieDesPierceInsertBuilder

License requirements: ug_die_design ("Die Design")
.

setClearanceCollision(double) - Method in interface nxopen.tooling.RunSimulationBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setClearanceColor(NXColor) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setClearanceDistance(double) - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setClearanceDistance(double) - Method in interface nxopen.cam.ProbeProtectedParametersBuilder

License requirements: cam_base ("CAM BASE")
.

setClearanceGeometryType(ClearanceBuilder.ClearanceGeometryTypes) - Method in interface nxopen.die.ClearanceBuilder

License requirements: ug_die_design ("Die Design")
.

setClearancePlane(NXObject) - Method in interface nxopen.cam.ToolPathDivideBuilder

License requirements: None.

setClearanceSetName(String) - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setClearanceTolerance(double) - Method in interface nxopen.features.shipdesign.PlateChamferBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setClearanceType(NcmClearanceBuilder.ClearanceTypes) - Method in interface nxopen.cam.NcmClearanceBuilder

License requirements: cam_base ("CAM BASE")
.

setClearanceValue(double) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder

License requirements: None.

setClearanceValues(double[]) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

Set the clearance values for the components used in the clearance analysis.

setClearPlaneData(Tag, double[], double[]) - Method in interface nxopen.uf.UFCam

Refer to UF_CAM_set_clear_plane_data for documentation.

setClearPlaneStatus(Tag, UFParam.ClrplaneStatus) - Method in interface nxopen.uf.UFCam

Refer to UF_CAM_set_clear_plane_status for documentation.

setClearPlaneTag(Tag, Tag) - Method in interface nxopen.uf.UFCam

Refer to UF_CAM_set_clear_plane_tag for documentation.

setClearPlaneUsage(Tag, UFParam.ClrplaneUsage) - Method in interface nxopen.uf.UFCam

Refer to UF_CAM_set_clear_plane_usage for documentation.

setClientDataWithSelectedItem(String, String) - Method in interface nxopen.tooling.MoldFillingBuilder

Gets selected part data, and assign it to standard part client data.

setCliffEdges(ScCollector) - Method in interface nxopen.features.EdgeBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setCliffProjectOntoSecondWall(boolean) - Method in interface nxopen.features.FaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setClipCoplanarObjects(boolean) - Method in interface nxopen.annotations.LightweightSectionBuilder

License requirements: geometric_tol ("GDT")
.

setClipCoplanarObjectsForLightweightSectionViews(boolean) - Method in interface nxopen.annotations.PmiPreferences

License requirements: None.

setClipOrdinateDimensionLine(boolean) - Method in interface nxopen.annotations.LineAndArrowPreferences

Sets the clipping of the dimension line to the ordinate origin at the view border
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setClipOrdinateDimensionLine(boolean) - Method in interface nxopen.annotations.LineArrowStyleBuilder

Sets the clipping of the dimension line to the ordinate origin at the view border
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setClippingEndPoint(Point) - Method in interface nxopen.display.PointCloudClippingBoxesListItemBuilder

License requirements: nx_point_cloud_view ("NX Point Cloud Viewer")
.

setClippingSide(PointCloudClippingBoxesListItemBuilder.ClippingSides) - Method in interface nxopen.display.PointCloudClippingBoxesListItemBuilder

License requirements: nx_point_cloud_view ("NX Point Cloud Viewer")
.

setClippingStartPoint(Point) - Method in interface nxopen.display.PointCloudClippingBoxesListItemBuilder

License requirements: nx_point_cloud_view ("NX Point Cloud Viewer")
.

setClipType(DynamicSectionTypes.Clip) - Method in interface nxopen.display.DynamicSectionBuilder

License requirements: None.

setClipValue(double) - Method in interface nxopen.cae.ClippingParameters

Set clip value
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setClockIncrement(double) - Method in interface nxopen.routing.Port

The clock angle increment value of Port
License requirements: routing_base ("Routing Basic")

Created in NX4.0.0

setClockIncrementObject(Expression) - Method in interface nxopen.routing.Port

License requirements: routing_base ("Routing Basic")
.

setClockType(PatternClockingBuilder.ClockingType) - Method in interface nxopen.geometricutilities.PatternClockingBuilder

License requirements: None.

setClone(boolean) - Method in interface nxopen.tooling.ClonePart

License requirements: None.

setClonedProductName(String) - Method in interface nxopen.tooling.ChangeoverManagementBuilder

License requirements: None.

setCloneMethod(ToolingClonemethod) - Method in interface nxopen.tooling.CloneObject

License requirements: None.

setCloneObject(CloneObject) - Method in interface nxopen.tooling.AddReusablePart

Sets the clone operation object
License requirements: None.

setCloneObject(CloneObject) - Method in interface nxopen.tooling.MoldFillingBuilder

Sets clone client data.

setCloneRelatedCae(UFClone.CloneRelCae) - Method in interface nxopen.uf.UFClone

Refer to UF_CLONE_set_clone_related_cae for documentation.

setCloneRelatedDwgs(boolean) - Method in interface nxopen.uf.UFClone

Refer to UF_CLONE_set_clone_related_dwgs for documentation.

setClose(double) - Method in interface nxopen.tooling.DieBaseBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setClosed(boolean) - Method in interface nxopen.features.FitSurfaceBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setClosed(boolean) - Method in interface nxopen.features.SpineCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setClosed(boolean) - Method in interface nxopen.features.subdivision.SubdivisionLoftBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setClosed(boolean) - Method in interface nxopen.SketchEllipseBuilder

License requirements: None.

setClosedBSpline(boolean) - Method in interface nxopen.features.FitCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setClosedCornerDiameter(String) - Method in interface nxopen.features.sheetmetal.MiterOptions

License requirements: None.

setClosedCornerType(MiterOptions.ClosedCornerTypeOptions) - Method in interface nxopen.features.sheetmetal.MiterOptions

Sets the closed corner option type.

setClosedCurve(boolean) - Method in interface nxopen.cae.NodesOnCurveBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setClosedCurve(boolean) - Method in interface nxopen.features.FitCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setClosedInV(boolean) - Method in interface nxopen.features.ThroughCurvesBuilder

License requirements: features_modeling ("FEATURES MODELING") OR nx_freeform_1 ("basic freeform modeling")
.

setClosedStartOrientation(IOrientation) - Method in interface nxopen.die.DrawDiePunchBuilder

Sets the closed start orientation of the draw die punch casting.

setClosedVolumeToggle(boolean) - Method in interface nxopen.cae.GroupByBoundaryBuilder

License requirements: None.

setCloseGaps(WrapGeometryBuilder.CloseGapType) - Method in interface nxopen.features.WrapGeometryBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setCloseGaps(SinumerikCaSimplifyBodiesBuilder.CloseGapTypes) - Method in interface nxopen.sim.SinumerikCaSimplifyBodiesBuilder

License requirements: nx_isv_mtb ("Machine Tool Builder") OR nx_sinumerik_ca ("Sinumerik Collision Avoidance")
.

setCloseProfileRule(SmartVolumeProfileBuilder.CloseProfileRuleType) - Method in interface nxopen.geometricutilities.SmartVolumeProfileBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setClosureType(ClosedCornerBuilder.ClosureTypeOptions) - Method in interface nxopen.features.sheetmetal.ClosedCornerBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setClrSetName(String) - Method in interface nxopen.tooling.ValidCheckBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setClrZone(double) - Method in interface nxopen.tooling.ValidCheckBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setClsfData(boolean) - Method in interface nxopen.PlotBuilder

License requirements: None.

setClsfDecimals(int) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setClsfForceLoadTurret(boolean) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setCncOption(boolean) - Method in interface nxopen.tooling.EWDraftingBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setCncTemplate(EWDraftingBuilder.CNCTemplateOption) - Method in interface nxopen.tooling.EWDraftingBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setCo(String, UFClone.CheckoutData) - Method in interface nxopen.uf.UFClone

Refer to UF_CLONE_set_co for documentation.

setCoarsePrecision(double) - Method in interface nxopen.sim.KinematicAxisBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setCoaxialEnabled(boolean) - Method in interface nxopen.features.FaceRecognitionBuilder

License requirements: gateway ("UG GATEWAY")
.

setCodecFourcc(String) - Method in interface nxopen.MovieSettingsBuilder

License requirements: None.

setCoefficient(double) - Method in interface nxopen.motion.DamperBuilder

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using Motion.DamperBuilder#coefficientExpression or Motion.DamperBuilder#torsionalCoefficientExpression to query or edit it.

setCoefficientCSYS(CoordinateSystem) - Method in interface nxopen.features.GeneralConicBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setCoefficientDefinitionMethod(DDAMExcitation.CoefficientDefinitionType) - Method in interface nxopen.cae.responsesimulation.RSEventAttributes

License requirements: nx_response_anlys ("NX Response Analysis")
.

setCoefficientFile(String) - Method in interface nxopen.cae.responsesimulation.RSEventAttributes

License requirements: nx_response_anlys ("NX Response Analysis")
.

setCoefficientFunction(Function) - Method in interface nxopen.motion.DamperBuilder

License requirements: mechanisms ("MECHANISMS")
.

setCoefficientFunction(Function) - Method in interface nxopen.motion.SpringBuilder

License requirements: mechanisms ("MECHANISMS")
.

setCoefficientsType(ConnectorCoefficientTypes) - Method in interface nxopen.motion.BushingGeneralCoefficientsComponent

License requirements: mechanisms ("MECHANISMS")
.

setCoefficientType(ConnectorCoefficientTypes) - Method in interface nxopen.motion.DamperBuilder

License requirements: mechanisms ("MECHANISMS")
.

setCoefficientType(ConnectorCoefficientTypes) - Method in interface nxopen.motion.SpringBuilder

License requirements: mechanisms ("MECHANISMS")
.

setCoincident(boolean) - Method in interface nxopen.InferredConstraintsBuilder

License requirements: None.

setCoincident(boolean) - Method in interface nxopen.SketchAutoConstrainBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setCoincidentEdgeCollector(ScCollector) - Method in interface nxopen.features.FaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setCoincidentVertexEnabled(boolean) - Method in interface nxopen.features.CurveFinderBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setCoincidentVertexSketchGroupEnabled(boolean) - Method in interface nxopen.features.CurveFinderBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setColinearThreshold(double) - Method in interface nxopen.cae.FluidDomainBuilder

License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")
.

setCollaborativeDesign(CollaborativeDesign) - Method in interface nxopen.assemblies.SubsetBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setCollaborativeDesign(CollaborativeDesign) - Method in interface nxopen.pdm.ConfigurationContextBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setCollapseState(boolean) - Method in interface nxopen.uistyler.CollapsibleGroup

License requirements: None.

setCollarPlateCreationApproach(ProfileCutoutBuilder.CollarPlateCreationApproaches) - Method in interface nxopen.features.shipdesign.ProfileCutoutBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setCollectionOneRange(ClearanceAnalysisBuilder.CollectionRange) - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setCollectionTwoRange(ClearanceAnalysisBuilder.CollectionRange) - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setCollector(ScCollector) - Method in interface nxopen.ExpressionCollectorSet

License requirements: None.

setCollectorName(String) - Method in interface nxopen.cae.ElementCreateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setCollectorName(String) - Method in interface nxopen.cae.ElementExtrudeBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setCollectorName(String) - Method in interface nxopen.cae.ElementProjectBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setCollectorName(String) - Method in interface nxopen.cae.ElementReflectBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setCollectorName(String) - Method in interface nxopen.cae.ElementRevolveBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setCollectorName(String) - Method in interface nxopen.cae.FluidDomainBuilder

License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")
.

setCollectorName(String) - Method in interface nxopen.cae.MeshCollectorBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setCollectorName(String) - Method in interface nxopen.cae.MeshFromBoundaryBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setCollectorName(String) - Method in interface nxopen.cae.SpiderElementBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setCollinear(boolean) - Method in interface nxopen.InferredConstraintsBuilder

License requirements: None.

setCollinear(boolean) - Method in interface nxopen.SketchAutoConstrainBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setCollinearEnabled(boolean) - Method in interface nxopen.features.CurveFinderBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setCollinearSketchGroupEnabled(boolean) - Method in interface nxopen.features.CurveFinderBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setCollinearTolerance(double) - Method in interface nxopen.cae.BoltBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setCollisionAvoidanceEnum(InspectionLinkPmiBuilder.CollisionAvoidanceEnumType) - Method in interface nxopen.cam.InspectionLinkPmiBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setCollisionCheck(boolean) - Method in interface nxopen.cam.HoleMachiningBuilder

License requirements: cam_base ("CAM BASE")
.

setCollisionCheck(LaserProfileMove.CollisionChecks) - Method in interface nxopen.cam.LaserProfileMove

License requirements: cam_base ("CAM BASE")
.

setCollisionCheck(boolean) - Method in interface nxopen.cam.NcmHoleMachining

License requirements: cam_base ("CAM BASE")
.

setCollisionCheck(boolean) - Method in interface nxopen.cam.NcmOptimizeGroup

License requirements: cam_base ("CAM BASE")
.

setCollisionCheck(boolean) - Method in interface nxopen.cam.NcmPlanarBuilder

License requirements: cam_base ("CAM BASE")
.

setCollisionCheck(boolean) - Method in interface nxopen.cam.NcmScBuilder

License requirements: cam_base ("CAM BASE")
.

setCollisionCheckOption(RunSimulationBuilder.CollisionCheckOptions) - Method in interface nxopen.tooling.RunSimulationBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setCollisionClearance(double) - Method in interface nxopen.cam.CollisionPairBuilder

License requirements: cam_base ("CAM BASE")
.

setCollisionEnable(boolean) - Method in interface nxopen.cam.CollisionPairBuilder

License requirements: cam_base ("CAM BASE")
.

setCollisionFactor(double) - Method in interface nxopen.mechatronics.CollisionBodyBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setCollisionFlag(ProbeProtectedParametersBuilder.CollisionFlagTypes) - Method in interface nxopen.cam.ProbeProtectedParametersBuilder

License requirements: cam_base ("CAM BASE")
.

setCollisionMaterial(CollisionMaterial) - Method in interface nxopen.mechatronics.ChangeMaterialBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setCollisionMaterial(CollisionMaterial) - Method in interface nxopen.mechatronics.CollisionBodyBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setCollisionObject(NXObject) - Method in interface nxopen.routing.TransformPathBuilder

Sets collision object during the preview
License requirements: routing_base ("Routing Basic")
.

setCollisionPairIndex(int) - Method in interface nxopen.sim.SinumerikCaExportBuilder

License requirements: nx_sinumerik_ca ("Sinumerik Collision Avoidance")
.

setCollisionPrecision(double) - Method in interface nxopen.mechatronics.PreferencesBuilder

Deprecated.

Deprecated in NX9.0.0. This functionality is no longer supported.

setCollisionProperties(CollisionBodyBuilder.ShapePropertyTypes) - Method in interface nxopen.mechatronics.CollisionBodyBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setCollisionSensor(CollisionSensor[]) - Method in interface nxopen.mechatronics.ObjectSinkBuilder

Sets the collision sensor object.

setCollisionShape(CollisionBodyBuilder.CollisionShapeTypes) - Method in interface nxopen.mechatronics.CollisionBodyBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setCollisionShape(CollisionSensorBuilder.CollisionShapeTypes) - Method in interface nxopen.mechatronics.CollisionSensorBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setCollshape(SimulationOptionsBuilder.ToolShapeColl) - Method in interface nxopen.cam.SimulationOptionsBuilder

License requirements: cam_base ("CAM BASE")
.

setColor(NXColor) - Method in interface nxopen.annotations.AutomaticCenterlineBuilder

License requirements: drafting ("DRAFTING")
.

setColor(NXColor) - Method in interface nxopen.annotations.CenterlineSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setColor(int) - Method in interface nxopen.annotations.CuttingPlaneSymbolBuilder

License requirements: geometric_tol ("GDT")
.

setColor(NXColor) - Method in interface nxopen.annotations.EditSymbolDisplayBuilder

License requirements: drafting ("DRAFTING")
.

setColor(NXColor) - Method in interface nxopen.annotations.HatchBuilder

Deprecated.

Deprecated in NX7.5.0. Use HatchFillSettingsBuilder instead.

setColor(NXColor) - Method in interface nxopen.annotations.HatchFillSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setColor(NXColor) - Method in interface nxopen.annotations.HatchStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setColor(NXColor) - Method in interface nxopen.annotations.IntersectionSymbolBuilder

License requirements: drafting ("DRAFTING")
.

setColor(NXColor) - Method in interface nxopen.annotations.OffsetCenterPointBuilder

License requirements: drafting ("DRAFTING")
.

setColor(NXColor) - Method in interface nxopen.annotations.TargetPointBuilder

License requirements: drafting ("DRAFTING")
.

setColor(int) - Method in interface nxopen.cae.LaminatePly

License requirements: nx_lam_composites ("Laminate Composites")
.

setColor(NXColor) - Method in interface nxopen.cae.MeshCollectorDisplayDefaults

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setColor(NXColor) - Method in interface nxopen.cae.MeshDisplaySettings

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setColor(NXColor) - Method in interface nxopen.cae.xyplot.BaseLineStyleSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setColor(NXColor) - Method in interface nxopen.cae.xyplot.ScatterStyleSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setColor(NXColor) - Method in interface nxopen.cae.xyplot.TextBoxStyleSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setColor(NXColor) - Method in interface nxopen.cae.xyplot.TextStyleSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setColor(UnknownResultColor) - Method in interface nxopen.cae.xyplot.UnknownResultScaleStyle

License requirements: nx_ftk ("NX Advanced Graphing")
.

setColor(NXColor) - Method in interface nxopen.display.SectionCurveSettingsBuilder

License requirements: None.

setColor(int) - Method in interface nxopen.display.TransientText

Sets the index of the color to be used to display the transient text.

setColor(int) - Method in interface nxopen.DisplayableObject

License requirements: None.

setColor(NXColor) - Method in interface nxopen.drawings.BrokenViewBuilder

License requirements: None.

setColor(NXColor) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use nxopen.drawings.TrackDrawingChangesGeneralBuilder#setChangeSymbolLineColorFontWidth instead.

setColor(NXColor) - Method in interface nxopen.drawings.SectionLineStyleBuilder

Deprecated.

Deprecated in NX10.0.0. Use ViewSectionLineBuilder.lineColorFontWidth() instead.

setColor(String, ShipbuildingLinesViewStyle.Lines, int) - Method in interface nxopen.drawings.ShipbuildingLinesViewStyle

The color of ship line.

setColor(String, ShipDraftingViewLinesViewStyle.Lines, NXColor) - Method in interface nxopen.drawings.ShipDraftingViewLinesViewStyle

The color of ship line.

setColor(NXColor) - Method in interface nxopen.drawings.ViewStyleFPCurvesBuilder

License requirements: drafting ("DRAFTING")
.

setColor(NXColor) - Method in interface nxopen.drawings.ViewStyleHiddenLinesBuilder

License requirements: drafting ("DRAFTING")
.

setColor(NXColor) - Method in interface nxopen.drawings.ViewStyleSmoothEdgesBuilder

License requirements: drafting ("DRAFTING")
.

setColor(NXColor) - Method in interface nxopen.drawings.ViewStyleVirtualIntersectionsBuilder

License requirements: drafting ("DRAFTING")
.

setColor(NXColor) - Method in interface nxopen.features.ColorFaceBuilder

License requirements: None.

setColor(NXColor) - Method in interface nxopen.features.ColorFeatureBuilder

License requirements: None.

setColor(NXColor) - Method in interface nxopen.features.ColorFeatureGroupBuilder

License requirements: None.

setColor(NXColor) - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setColor(NXColor) - Method in interface nxopen.features.vehicledesign.BaseDataLoadingBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setColor(NXColor) - Method in interface nxopen.features.vehicledesign.PendulumPlacementBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setColor(int) - Method in interface nxopen.layout2d.CreateComponentFrom3DSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setColor(int) - Method in interface nxopen.mechatronics.DisplayChangerBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setColor(int) - Method in interface nxopen.preferences.PartDrafting

Sets the color of the retained Annotation objects.

setColor(PartObject.ObjectType, int) - Method in interface nxopen.preferences.PartObject

Sets the color.

setColor(String, ShipbuildingLinesViewPreferences.Lines, int) - Method in interface nxopen.preferences.ShipbuildingLinesViewPreferences

The color of ship line.

setColor(String, ShipDraftingViewLinesViewPreferences.Lines, int) - Method in interface nxopen.preferences.ShipDraftingViewLinesViewPreferences

The color of ship line.

setColor(int, int, String, double[]) - Method in interface nxopen.uf.UFDisp

Refer to UF_DISP_set_color for documentation.

setColor(Tag, int) - Method in interface nxopen.uf.UFObj

Refer to UF_OBJ_set_color for documentation.

setColor(NXColor.Rgb) - Method in interface nxopen.visualreporting.GroupLabel

License requirements: nx_visual_reporting ("Visual Reporting")
.

setColor3Value(double[]) - Method in interface nxopen.display.CgfxAttributeValueColor3Builder

Deprecated.

Deprecated in NX10.0.0. No alternative provided for this class.

setColor4Value(double[]) - Method in interface nxopen.display.CgfxAttributeValueColor4Builder

Deprecated.

Deprecated in NX10.0.0. No alternative provided for this class.

setColorAndLayers(boolean) - Method in interface nxopen.Step203Creator

Deprecated.

Deprecated in NX11.0.0. Use StepCreator instead.

setColorAndLayers(boolean) - Method in interface nxopen.StepCreator

License requirements: None.

setColorApproach(NXColor) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setColorBy(PathDisplay.ColorByType) - Method in interface nxopen.cam.PathDisplay

License requirements: None.

setColorControlType(IpwAnalysisBuilder.ColorControl) - Method in interface nxopen.cam.IpwAnalysisBuilder

License requirements: cam_base ("CAM BASE")
.

setColorDepthPass(NXColor) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setColorDraftAngleFailure(NXColor) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setColorDraftAnglePass(NXColor) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setColorDraftAngleWarning(NXColor) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setColorEntryExit(NXColor) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setColorFailure(NXColor) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setColorIndex(int) - Method in interface nxopen.ColorDefinition

License requirements: None.

setColorInsideNegative(double[]) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder

Sets the negative inside color
License requirements: studio_analyze ("STUDIO ANALYZE")
.

setColorInsidePositive(double[]) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder

Sets the positive inside color
License requirements: studio_analyze ("STUDIO ANALYZE")
.

setColorLegendOption(FaceAnalysisDisplayBuilder.ColorLegendOptions) - Method in interface nxopen.geometricanalysis.FaceAnalysisDisplayBuilder

License requirements: None.

setColorLine(NXColor) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setColorMapDisplayed(boolean) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setColorMeasurePoint(NXColor) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setColorMode(ImageBaseBuilder.ImageColorModes) - Method in interface nxopen.display.ImageBaseBuilder

License requirements: None.

setColorModified(boolean) - Method in interface nxopen.tooling.SpecifyBaffleBuilder

Sets the color value modified or not.

setColorName(String) - Method in interface nxopen.ColorDefinition

License requirements: None.

setColorName(String) - Method in interface nxopen.routing.electrical.ElectricalStockDevice

Sets the color name.

setColorOfGroupLabel(GroupLabel, NXColor.Rgb) - Method in interface nxopen.visualreporting.VisualReportBuilder

Sets the GroupLabel.color() of the given GroupLabel .

setColorOption(BarColorOption) - Method in interface nxopen.cae.xyplot.BarStyle3DSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setColorOption(PlateColorOption) - Method in interface nxopen.cae.xyplot.PlateStyle3DSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setColorOption(SurfaceColorOption) - Method in interface nxopen.cae.xyplot.SurfaceStyleSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setColorOption(SectionCurveSettingsBuilder.ColorOptionType) - Method in interface nxopen.display.SectionCurveSettingsBuilder

License requirements: None.

setColorOption(ShipDesignPreferencesBuilder.ColorType) - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setColorOption(DynamicSectionTypes.CurveColorOption) - Method in interface nxopen.layout2d.CreateComponentFrom3DSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setColorOutsideNegative(double[]) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder

Sets the negative outside color
License requirements: studio_analyze ("STUDIO ANALYZE")
.

setColorOutsidePositive(double[]) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder

Sets the positive outside color
License requirements: studio_analyze ("STUDIO ANALYZE")
.

setColorPicker(double[]) - Method in interface nxopen.display.IrayPlusSimpleMaterialEditorBuilder

Sets the color picker
License requirements: studio_render ("UG STUDIO RENDER")
.

setColorPicker(NXColor) - Method in interface nxopen.tooling.MWCopySheetsBuilder

License requirements: None.

setColorPicker(NXColor) - Method in interface nxopen.tooling.StripLayoutStationInformationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setColorPlotType(DeviationGaugeBuilder.ColorPlotTypes) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setColorRetract(NXColor) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setColors(CGMBuilder.Color) - Method in interface nxopen.CGMBuilder

License requirements: None.

setColors(PlotColorsWidthsBuilder.Color) - Method in interface nxopen.PlotColorsWidthsBuilder

License requirements: None.

setColors(PrintPDFBuilder.Color) - Method in interface nxopen.PrintPDFBuilder

License requirements: None.

setColors(UFSf.ColorAttr) - Method in interface nxopen.uf.UFSfLegend

Refer to UF_SF_LEGEND_set_colors for documentation.

setColorSaturation(double) - Method in interface nxopen.display.EnvironmentBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setColorSaturation(double) - Method in interface nxopen.display.ImageBasedLighting

License requirements: None.

setColorsOnMeshes() - Method in interface nxopen.cae.ModelDisplayBuilder

This method will set the colors from the current element color cycler on all of the meshes in the model.

setColorTransition(NXColor) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setColorValue(int[]) - Method in interface nxopen.blockstyler.LineColorFontWidth

Sets line color values
License requirements: None.

setColorValue(int[]) - Method in interface nxopen.blockstyler.TextColorFontWidth

Sets text color values
License requirements: None.

setColorValue(double, double, double) - Method in interface nxopen.tooling.EnlargeSurfaceBuilder

Sets the value of patch surface color.

setColorValue(double, double, double) - Method in interface nxopen.tooling.TrimRegionBuilder

Sets the value of surface patch color.

setColorValues(ColorDefinitionRgb) - Method in interface nxopen.ColorDefinition

Sets the color values.

setColorWarning(NXColor) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setColPrefs(Tag, UFPlist.ColPrefs) - Method in interface nxopen.uf.UFPlist

Refer to UF_PLIST_set_col_prefs for documentation.

setColumn(int) - Method in interface nxopen.blockstyler.Group

License requirements: None.

setColumnBaseTypeEnum(ColumnGridEquipmentBuilder.ColumnBaseType) - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setColumnCount(int) - Method in interface nxopen.ITableEditorDataProvider

Sets the number of columns in the table
License requirements: None.

setColumnDisplayIDs(boolean) - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setColumnDisplayText(int, String) - Method in interface nxopen.blockstyler.Node

Sets the text in the column which corresponds to given columnId.

setColumnDisplayType(int, Tree.ColumnDisplay) - Method in interface nxopen.blockstyler.Tree

Sets the display type of the column.

setColumnHeadCfw(Tag, Tag, int[]) - Method in interface nxopen.uf.UFTabnot

Refer to UF_TABNOT_set_column_head_cfw for documentation.

setColumnLabels(String[]) - Method in interface nxopen.blockstyler.SetList

Sets the ColumnLabels
License requirements: None.

setColumnModes(Tag, int, int, int) - Method in interface nxopen.uf.UFPlist

Deprecated.

The equivalent Open C method has retired

setColumnNumber(String) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder

License requirements: None.

setColumnOrder(BendTableSettingsBuilder.ColumnType[]) - Method in interface nxopen.annotations.BendTableSettingsBuilder

Sets the order of the columns in the bend table
License requirements: drafting ("DRAFTING")
.

setColumnOriginPoint(Point) - Method in interface nxopen.linedesigner.ColumnFeatureBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setColumnResizePolicy(int, Tree.ColumnResizePolicy) - Method in interface nxopen.blockstyler.Tree

Sets the column resize policy.

setColumnRotate90Degrees(boolean) - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setColumnSortable(int, boolean) - Method in interface nxopen.blockstyler.Tree

Sets the flag indicating whether the column is sortable.

setColumnSortData(Tag, UFTabnot.SortData) - Method in interface nxopen.uf.UFTabnot

Refer to UF_TABNOT_set_column_sort_data for documentation.

setColumnSortHandler(Tree.ColumnSortCallback) - Method in interface nxopen.blockstyler.Tree

Sets the column sort callback.

setColumnSortOption(int, Tree.ColumnSortOption) - Method in interface nxopen.blockstyler.Tree

Sets the column sort option.

setColumnSpacingDouble(double) - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setColumnStyleEnum(ColumnFeatureBuilder.ColumnType) - Method in interface nxopen.linedesigner.ColumnFeatureBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setColumnTitle(int, String) - Method in interface nxopen.blockstyler.Tree

Sets the column title.

setColumnTitles(String) - Method in interface nxopen.blockstyler.DoubleTable

License requirements: None.

setColumnTitles(String) - Method in interface nxopen.blockstyler.IntegerTable

License requirements: None.

setColumnTypeEnum(ColumnGridEquipmentBuilder.ColumnType) - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setColumnVisible(int, boolean) - Method in interface nxopen.blockstyler.Tree

Sets the flag indicating whether the column is visible
License requirements: None.

setColumnWideNumber(int) - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setColumnWidth(double) - Method in interface nxopen.annotations.TableSectionBuilder

License requirements: drafting ("DRAFTING")
.

setColumnWidth(int, int) - Method in interface nxopen.blockstyler.Tree

Sets the column width
License requirements: None.

setColumnWidth(Tag, double) - Method in interface nxopen.uf.UFTabnot

Refer to UF_TABNOT_set_column_width for documentation.

setColumnWidths(int[]) - Method in interface nxopen.blockstyler.SetList

Sets the ColumnWidths
License requirements: None.

setColumnWidths(double[]) - Method in interface nxopen.openxml.TableDocumentData

Sets the width array of the columns
License requirements: None.

setCombDensity(int) - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord

Deprecated.

Deprecated in NX8.5.0. Use CurveAnalysisDisplay .

setCombinationHoles(boolean) - Method in interface nxopen.annotations.HoleTableSettingsHoleFiltersBuilder

License requirements: drafting ("DRAFTING")
.

setCombinationMethod(CombinationEvaluationOptions.MultipleExcitationCombinationMethod) - Method in interface nxopen.cae.responsesimulation.CombinationEvaluationOptions

License requirements: nx_response_anlys ("NX Response Analysis")
.

setCombineAcross(boolean) - Method in interface nxopen.cae.ResultProbeBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setCombineAcrossEntities(boolean) - Method in interface nxopen.cae.PostGraphAcrossIterationsBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setCombineAcrossIteration(boolean) - Method in interface nxopen.cae.ResultProbeBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setCombineBody(boolean) - Method in interface nxopen.cae.Mesh0dBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setCombineConnectedJoints(boolean) - Method in interface nxopen.weld.WeldJointBuilder

License requirements: structure_weld ("STRUCTURE WELD")
.

setCombinedValue(ResultProbeBuilder.CombineAcrossEntities) - Method in interface nxopen.cae.ResultProbeBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setCombineIterOption(ResultProbeBuilder.CombineAcrossIterations) - Method in interface nxopen.cae.ResultProbeBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setCombineOption(boolean) - Method in interface nxopen.features.TrimAndExtendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setCombineRibWithTarget(boolean) - Method in interface nxopen.features.RibBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setCombineValueFromEntitiesOption(PostGraphAcrossIterationsBuilder.CombinationMethod) - Method in interface nxopen.cae.PostGraphAcrossIterationsBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setCombInterneedleDensity(int) - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord

Deprecated.

Deprecated in NX8.5.0. Use CurveAnalysisDisplay .

setCombMaxLength(double) - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord

Deprecated.

Deprecated in NX8.5.0. Use CurveAnalysisDisplay .

setComboOptions(double[]) - Method in interface nxopen.blockstyler.DoubleBlock

Sets the ComboOptions
License requirements: None.

setComboOptions(int[]) - Method in interface nxopen.blockstyler.IntegerBlock

Sets the ComboOptions
License requirements: None.

setCombScaleFactor(double) - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord

Deprecated.

Deprecated in NX8.5.0. Use CurveAnalysisDisplay .

setCommandType(InspectionCmmCommandBuilder.CommandTypes) - Method in interface nxopen.cam.InspectionCmmCommandBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setComment(String) - Method in interface nxopen.issue.IssueContent

License requirements: nx_issue_mgmt ("NX Issue Tracking")
.

setComment(String) - Method in interface nxopen.issue.IssueContentBuilder

License requirements: nx_issue_mgmt ("NX Issue Tracking")
.

setComment(String) - Method in interface nxopen.markup.MarkupObject

License requirements: None.

setCommon(NXColor) - Method in interface nxopen.cam.PathDisplayColors

License requirements: cam_base ("CAM BASE")
.

setCommonFacesSearched(boolean) - Method in interface nxopen.features.SewBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setCommonSlugHole(boolean) - Method in interface nxopen.die.PierceHoleParentBuilder

Sets the common slug hole switch of pierce holes
License requirements: ug_die_design ("Die Design")
.

setCommonZone(boolean) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setCommunicationInterval(Expression) - Method in interface nxopen.motion.MechatronicsBuilder

License requirements: mechanisms ("MECHANISMS")
.

setCommunicationIntervalType(MechatronicsBuilder.SolverCommunicationIntervalType) - Method in interface nxopen.motion.MechatronicsBuilder

License requirements: mechanisms ("MECHANISMS")
.

setComp(Result.Component) - Method in interface nxopen.cae.ResultVariable

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setCompanionResultName(String) - Method in interface nxopen.cae.ResultsManipulationBuilder

The companion result name if action is ResultsManipulationBuilder.Action.CREATE_COMPANION_RESULT
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Created in NX8.5.0

setCompanionResultReference(SimResultReference) - Method in interface nxopen.cae.ResultsManipulationBuilder

The companion Result Reference if action is ResultsManipulationBuilder.Action.CREATE_COMPANION_RESULT
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Created in NX10.0.0

setCompanionResultsFile(String) - Method in interface nxopen.cae.CompanionResultBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setCompanionSolution(SimSolution) - Method in interface nxopen.cae.ResultsManipulationBuilder

Deprecated.

Deprecated in NX10.0.0. Use ResultsManipulationBuilder.setCompanionResultReference(nxopen.cae.SimResultReference) instead.

setCompany(String) - Method in interface nxopen.IgesCreator

License requirements: None.

setCompany(String) - Method in interface nxopen.Step203Creator

Deprecated.

Deprecated in NX11.0.0. Use StepCreator instead.

setCompany(String) - Method in interface nxopen.Step214Creator

Deprecated.

Deprecated in NX11.0.0. Use StepCreator instead.

setCompany(String) - Method in interface nxopen.StepCreator

License requirements: None.

setCompanyAddress(String[]) - Method in interface nxopen.annotations.EnterpriseIdentificationBuilder

Sets the company address
License requirements: None.

setCompanyName(String) - Method in interface nxopen.annotations.EnterpriseIdentificationBuilder

License requirements: None.

setCompareEmphasizeMode(CompareModeBuilder.CompareMode) - Method in interface nxopen.features.shipdesign.CompareModeBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setCompareMethod(TrackDrawingChangesGeneralBuilder.CompareMethodType) - Method in interface nxopen.drawings.TrackDrawingChangesGeneralBuilder

License requirements: drafting ("DRAFTING")
.

setCompareMethodType(VisualDrawingComparePrefsBuilder.VisualDrawingComparePrefsMethodType) - Method in interface nxopen.drawings.VisualDrawingComparePrefsBuilder

License requirements: drafting ("DRAFTING")
.

setCompareObject(TaggedObject) - Method in interface nxopen.features.shipdesign.FilterBuilder

License requirements: None.

setCompareTolerance(double) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use TrackDrawingChangesGeneralBuilder.setCompareTolerance(double) instead.

setCompareTolerance(double) - Method in interface nxopen.drawings.TrackDrawingChangesGeneralBuilder

License requirements: drafting ("DRAFTING")
.

setCompareTypesEnum(CompareRunsBuilder.CompareTypes) - Method in interface nxopen.routing.CompareRunsBuilder

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setCompensationNumber(String) - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setCompensationPartNumber(String) - Method in interface nxopen.features.shipdesign.PenetrationAssociationBuilder

The selection compensation
License requirements: nx_penetration_mgmt ("Penetration Management")
.

setCompensationType(PenetrationRequest.CompensationType) - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder

License requirements: nx_penetration_mgmt ("Penetration Management")
.

setCompFactor(double) - Method in interface nxopen.tooling.QuickQuotationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setComplementAngleFlag(boolean) - Method in interface nxopen.features.AngularDimBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setComplex(Result.Complex) - Method in interface nxopen.cae.ResultVariable

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setComplexCriterion(Result.Complex) - Method in interface nxopen.cae.CrossSectionParameters

Set complex criteria
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setComplexCriterion(Result.Complex) - Method in interface nxopen.cae.DeformationParameters

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setComplexCriterion(Result.Complex) - Method in interface nxopen.cae.ResultParameters

Set complex criteria
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setComplexData(double[], double[], double[]) - Method in interface nxopen.cae.AfuData

Set the XY Data of an AFU record when the ordinate type is Complex
License requirements: nx_ftk ("NX Advanced Graphing")
.

setComplexData(double, double, double[], double[]) - Method in interface nxopen.cae.AfuData

Set the XY Data of an AFU record when the ordinate type is Complex
License requirements: nx_ftk ("NX Advanced Graphing")
.

setComplexData(double[], double[], double[]) - Method in interface nxopen.cae.ftk.ArrayRecord2D

Sets complex points data
License requirements: nx_ftk ("NX Advanced Graphing")
.

setComplexGraphTypes(ComplexOption2D) - Method in interface nxopen.cae.PostGraphBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setComplexOption(ComplexOption2D) - Method in interface nxopen.cae.xyplot.GeneralDisplayStyles2D

License requirements: nx_ftk ("NX Advanced Graphing")
.

setComplexOption(ComplexOption2DColorContour) - Method in interface nxopen.cae.xyplot.GeneralDisplayStyles2DColorContour

License requirements: nx_ftk ("NX Advanced Graphing")
.

setComplexOption(ComplexOption3D) - Method in interface nxopen.cae.xyplot.GeneralDisplayStyles3D

License requirements: nx_ftk ("NX Advanced Graphing")
.

setComplexOption(int) - Method in interface nxopen.cae.xyplot.PlotParameters

License requirements: None.

setComplexScalarFieldWrapperPropertyValue(String, ComplexScalarFieldWrapper) - Method in interface nxopen.BasePropertyTable

Sets the complex scalar field wrapper ComplexScalarFieldWrapper
License requirements: None.

setComponent(Result.Component) - Method in interface nxopen.cae.DeformationParameters

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setComponent(Result.Component) - Method in interface nxopen.cae.PostJtExportBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setComponent(Component) - Method in interface nxopen.mechatronics.ElectricalPart

Set the related Component .

setComponent(ControlInputPortBuilder.MeasuredComponent) - Method in interface nxopen.motion.ControlInputPortBuilder

License requirements: mechanisms ("MECHANISMS")
.

setComponent(GraphBuilder.ComponentChoices) - Method in interface nxopen.motion.GraphBuilder

Deprecated.

Deprecated in NX11.0.0. Use Motion.GraphObjectBuilder instead.

setComponentBasedMechanism(boolean) - Method in interface nxopen.motion.MotionEnvironment

Sets component based mechanism
License requirements: mechanisms ("MECHANISMS")
.

setComponentCam(CreateNewComponentBuilder.ComponentCamType) - Method in interface nxopen.assemblies.CreateNewComponentBuilder

License requirements: None.

setComponentHandleToPoint() - Method in interface nxopen.tooling.AddReusablePart

Keep the reusable component handle information into its associated pattern point
License requirements: None.

setComponentLayer(int) - Method in interface nxopen.assemblies.ReplaceComponentBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setComponentLayerOptionType(ReplaceComponentBuilder.ComponentLayerOption) - Method in interface nxopen.assemblies.ReplaceComponentBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setComponentLoadMethod(LoadOptions.LoadMethod) - Method in interface nxopen.LoadOptions

Sets the option indicating what method to use to determine where to find component parts to load
License requirements: None.

setComponentMatchColumnHeading(String) - Method in interface nxopen.preferences.RoutingElectrical

Sets the column name of the component list used for component matching if the method is attribute matching.

setComponentMatchComponentAttributeTitle(String) - Method in interface nxopen.preferences.RoutingElectrical

Sets the component attribute name used for component matching if the method is attribute matching.

setComponentMatchMethod(RoutingElectrical.ComponentMatchType) - Method in interface nxopen.preferences.RoutingElectrical

Sets the component match option for automatic/manual component assignment.

setComponentMemberSelect(boolean) - Method in interface nxopen.preferences.SessionAssemblies

Sets the component member select option
License requirements: None.

setComponentMethod(PmiFilter.ComponentMethod) - Method in interface nxopen.annotations.PmiFilter

Sets the component method of the PMI filter.

setComponentName(String) - Method in interface nxopen.assemblies.ReplaceComponentBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setComponentName(String) - Method in interface nxopen.layout2d.CreateComponentFrom3DBuilder

License requirements: nx_layout ("NX Layout")
.

setComponentName(String) - Method in interface nxopen.routing.electrical.ConnectorDevice

Sets the component name.

setComponentNameType(ReplaceComponentBuilder.ComponentNameOption) - Method in interface nxopen.assemblies.ReplaceComponentBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setComponentOrigin(CreateNewComponentBuilder.ComponentOriginType) - Method in interface nxopen.assemblies.CreateNewComponentBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setComponentParameter(String, IrayPlusMatAttr) - Method in interface nxopen.display.IrayPlusMaterialEditorBuilder

To set attribute object for specific fomatted attribute name The string attribute name format should be : "layer name-interface name-attribute name" Let material ''Varnished Cherry' for example: If user wants to set 'Base' component's attribueObject of 'Base-Colour-Colour'.

setComponentParameterValue(String, String) - Method in interface nxopen.display.IrayPlusMaterialEditorBuilder

To set attribute value for specific fomatted attribute name The string attribute name format should be : "layer name-interface name-attribute name" Let material ''Varnished Cherry' for example: If user wants to set 'Base' component's value of 'Base-Colour-Colour'.

setComponentPatternBuilder(ComponentPatternBuilder) - Method in interface nxopen.tooling.AddReusablePart

License requirements: None.

setComponentPatternBuilder(ComponentPatternBuilder) - Method in interface nxopen.tooling.FastenerAssy

License requirements: None.

setComponentProperties(String, String, int) - Method in interface nxopen.tooling.AddReusablePart

Sets the reusable component properties
License requirements: None.

setComponentReferenceSetType(ReplaceComponentBuilder.ComponentReferenceSet, String) - Method in interface nxopen.assemblies.ReplaceComponentBuilder

Set the reference set
License requirements: assemblies ("ASSEMBLIES MODULE")
.

setComponents(Component[]) - Method in interface nxopen.annotations.PmiFilter

Sets the components associated with the PMI filter.

setComponentsCreation(boolean) - Method in interface nxopen.features.DatumCsysBuilder

Deprecated.

Deprecated in NX7.5.1. This property is now always TRUE and calls to this property can be safely removed.

setComponentStatus(Excitation.Component, boolean) - Method in interface nxopen.cae.responsesimulation.DDAMExcitationBuilder

Sets the status for a direction component
License requirements: nx_response_anlys ("NX Response Analysis")
.

setComponentsToLoad(LoadOptions.LoadComponents) - Method in interface nxopen.LoadOptions

Sets the option indicating what component parts to load during part open.

setComponentToReplace(int, Component) - Method in interface nxopen.tooling.AddReusablePart

Sets the selected component to replace
License requirements: None.

setComponentType(MotionSensorBuilder.Component) - Method in interface nxopen.motion.MotionSensorBuilder

License requirements: mechanisms ("MECHANISMS")
.

setComponentType(AddReusablePart.ComponentMode) - Method in interface nxopen.tooling.AddReusablePart

License requirements: None.

setComponentType(CompDrawingBuilder.ComponentTypeSelection) - Method in interface nxopen.tooling.CompDrawingBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setComposite(boolean) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setCompositeDrf(Tag, UFGdt.Precedence) - Method in interface nxopen.uf.UFGdt

Refer to UF_GDT_set_composite_drf for documentation.

setCompositeInsert(boolean) - Method in interface nxopen.tooling.BendInsertDesignBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setCompositeToleranceValueSource(InspectionToleranceOperationBuilder.ToleranceSource) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setCompound(boolean) - Method in interface nxopen.annotations.LineWeldDataBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setCompoundWeldSize(String) - Method in interface nxopen.annotations.LineWeldDataBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setCompoundWeldSizeCode(LineWeldDataBuilder.WeldSizeCodeType) - Method in interface nxopen.annotations.LineWeldDataBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setCompressionFlags(Tag, UFPart.CompressFlags) - Method in interface nxopen.uf.UFPart

Refer to UF_PART_set_compression_flags for documentation.

setCompressPart(boolean) - Method in interface nxopen.PartSaveOptions

Sets the option indicating whether solid data within part files will be compressed as it is saved to disk
License requirements: None.

setCompSectionInView(Tag, Tag, UFDraw.CompSectionInView) - Method in interface nxopen.uf.UFDraw

Refer to UF_DRAW_set_comp_section_in_view for documentation.

setComputationalTimeUserAttribute(Tag, String, int, int[], boolean) - Method in interface nxopen.uf.UFAttr

Refer to UF_ATTR_set_computational_time_user_attribute for documentation.

setComputationScope(ElementEdgeCheckBuilder.Scope) - Method in interface nxopen.cae.modelcheck.ElementEdgeCheckBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setComputationType(Result.ComputationType) - Method in interface nxopen.cae.ResultParameters

Set computing type.

setComputedSize(double) - Method in interface nxopen.annotations.Dimension

Deprecated.

Deprecated in NX8.0.0. Use Dimension.setDimensionText(java.lang.String[]) instead.

setConcaveCorners(BoundaryTurnMemberSet.ConcaveCornersTypeValue) - Method in interface nxopen.cam.BoundaryTurnMemberSet

License requirements: cam_base ("CAM BASE")
.

setConcaveRadius(double) - Method in interface nxopen.facet.CurvatureBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setConcentric(boolean) - Method in interface nxopen.InferredConstraintsBuilder

License requirements: None.

setConcentric(boolean) - Method in interface nxopen.SketchAutoConstrainBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setConcentricEnabled(boolean) - Method in interface nxopen.features.CurveFinderBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setConcentricSketchGroupEnabled(boolean) - Method in interface nxopen.features.CurveFinderBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setConceptDesign(boolean) - Method in interface nxopen.tooling.BendInsertDesignBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setConceptDesign(boolean) - Method in interface nxopen.tooling.DieInsertBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setConceptDesign(boolean) - Method in interface nxopen.tooling.PiercingInsertBuilder

License requirements: None.

setConceptDesign(boolean) - Method in interface nxopen.tooling.StandardPartBuilder

License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setConceptPart(String) - Method in interface nxopen.features.shipdesign.ConceptFromSpreadsheetBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setCondition(SimCondition) - Method in interface nxopen.cae.SimConditionTimeStep

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setCondition(String) - Method in interface nxopen.mechatronics.GanttOperationConditionBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setCondition(PackagingMeasureBuilder.MeasureCondition) - Method in interface nxopen.motion.PackagingMeasureBuilder

Sets the measure condition defined at PackagingMeasureBuilder.MeasureCondition
License requirements: mechanisms ("MECHANISMS")

Created in NX4.0.0

setCondition(String) - Method in interface nxopen.sim.Breakpoint

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setConditionId(String) - Method in interface nxopen.mechatronics.GanttOperationConditionBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setConditionOption(ExternalConnectionElementBuilder.ConditionType) - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setConditionSequences(SimConditionSequence[]) - Method in interface nxopen.cae.ImportSimulationBuilder

Set Condition Sequences to import
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setConditionValue(double) - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setConditionValue(String) - Method in interface nxopen.mechatronics.GanttOperationConditionBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setConductorCount(int) - Method in interface nxopen.features.sheetmetal.FlexibleCableBuilder

Sets the count of conductors.

setConduitPartNumber(String) - Method in interface nxopen.routing.electrical.CableDevice

Sets the part number of the conduit to be applied over this CableDevice object.

setConeAngle(double) - Method in interface nxopen.display.LightBuilder

License requirements: None.

setConeColor(double[]) - Method in interface nxopen.facet.DetectPrimitivesBuilder

Sets the cone color
License requirements: None.

setConectionType(ConnectionCreatorBuilder.ConnectionType) - Method in interface nxopen.linedesigner.ConnectionCreatorBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setConeheadAttrb(UFDisp.ConeheadAttrbSTag) - Method in interface nxopen.uf.UFDisp

Refer to UF_DISP_set_conehead_attrb for documentation.

setConfidenceLevel(double) - Method in interface nxopen.cae.LaminateRandomEventBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setConfidenceLevelOption(LaminateRandomEventBuilder.ConfidenceLevelOptionEnum) - Method in interface nxopen.cae.LaminateRandomEventBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setConfigAttribute(String) - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setConfigDetail(ConfigurationContextBuilder.ConfigurationDetail) - Method in interface nxopen.pdm.ConfigurationContextBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setConfigFile(String) - Method in interface nxopen.features.shipdesign.FrameBarOutBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setConfigFile(String) - Method in interface nxopen.features.shipdesign.ManufacturingOutBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setConfigFile(String) - Method in interface nxopen.JtCreator

License requirements: None.

setConfigName(String) - Method in interface nxopen.cae.PreTestExciterConfig

License requirements: nx_correl_base ("FE Correlation")
.

setConfigRule(String) - Method in interface nxopen.uf.UFUgmgr

Refer to UF_UGMGR_set_config_rule for documentation.

setConfigType(ConfigurationContextBuilder.ConfigContextType) - Method in interface nxopen.pdm.ConfigurationContextBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setConfiguration(InitProjectBuilder.ConfigurationId) - Method in interface nxopen.tooling.InitProjectBuilder

License requirements: None.

setConfigurationFile(String) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setConfigurationFile(String) - Method in interface nxopen.drawings.ConversionProcessSettingsBuilder

License requirements: convert_to_pmi (" Convert To PMI"), drafting ("DRAFTING")
.

setConfigurationFile(String) - Method in interface nxopen.drawings.ConvertDraftingContentsBuilder

License requirements: convert_to_pmi (" Convert To PMI"), drafting ("DRAFTING")
.

setConfirmBranchSelection(RoutingPath.ConfirmBranchSel) - Method in interface nxopen.preferences.RoutingPath

License requirements: routing_base ("Routing Basic")
.

setConfirmUndo(boolean) - Method in interface nxopen.preferences.SessionUserInterfaceUI

Sets the confirm undo flag
License requirements: None.

setConfirmWarningMessages(boolean) - Method in interface nxopen.weld.WeldImportBuilder

License requirements: structure_weld ("STRUCTURE WELD")
.

setConflictingColor(int) - Method in interface nxopen.preferences.PartSketch

Sets the sketch conflicting color
License requirements: None.

setConflictLogicalObject(LogicObject) - Method in interface nxopen.mechatronics.ComparisonResult

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setConformToSurface(boolean) - Method in interface nxopen.annotations.RegionBuilder

License requirements: geometric_tol ("GDT")
.

setConical(double) - Method in interface nxopen.motion.BushingCylindricalCoefficientsComponent

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using Motion.BushingCylindricalCoefficientsComponent#conicalExpression to query or edit it.

setConicalFunction(Function) - Method in interface nxopen.motion.BushingCylindricalCoefficientsComponent

License requirements: mechanisms ("MECHANISMS")
.

setConicalType(ConnectorCoefficientTypes) - Method in interface nxopen.motion.BushingCylindricalCoefficientsComponent

License requirements: mechanisms ("MECHANISMS")
.

setConicMethod(ConicCrossSection.DefineMethod) - Method in interface nxopen.geometricutilities.ConicCrossSection

License requirements: solid_modeling ("SOLIDS MODELING")
.

setConicTypeMode(SectionSurfaceBuilderEx.ConicType) - Method in interface nxopen.features.SectionSurfaceBuilderEx

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setConnectAngle(double) - Method in interface nxopen.features.shipdesign.StiffenerBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setConnectAngle(double) - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setConnectedCurve(NXObject[]) - Method in interface nxopen.mechatronics.CurveOnCurveJointBuilder

Set the connected curve which the attachment will move along
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setConnectedCurves(NXObject[]) - Method in interface nxopen.mechatronics.PointOnCurveJointBuilder

Set the connected curves which the attachment will move along
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setConnectedObject(NXObject) - Method in interface nxopen.mechanicalrouting.PathTransitionBuilder

License requirements: routing_base ("Routing Basic")
.

setConnectedPanelType(JointmarkBuilder.ConnectedPanelTypes) - Method in interface nxopen.weld.JointmarkBuilder

License requirements: ugweld ("UG WELD")
.

setConnectedPartAttributes(String[]) - Method in interface nxopen.weld.ExportWeldBuilder

Set the connected part attributes of weld points
License requirements: ugweld ("UG WELD")
.

setConnectedPartAttrToggle(boolean) - Method in interface nxopen.weld.ExportWeldBuilder

License requirements: ugweld ("UG WELD")
.

setConnectingOnlyOnePart(boolean) - Method in interface nxopen.weld.WeldPointBuilder

Sets
License requirements: ugweld ("UG WELD")
.

setConnectionString(String) - Method in interface nxopen.tooling.StockSizeBuilder

License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setConnectionType(EndCutBuilder.ConnectionTypes) - Method in interface nxopen.features.shipdesign.EndCutBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setConnectMember(BoundaryMemberSet.ConnectMemberType) - Method in interface nxopen.cam.BoundaryMemberSet

License requirements: cam_base ("CAM BASE")
.

setConnectorCompatibleTypeList(String[]) - Method in interface nxopen.linedesigner.TypedConnectorFeatureBuilder

Sets the enter text string
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setConnectorCompatibleTypeName(String) - Method in interface nxopen.linedesigner.TypedConnectorFeatureBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setConnectorDirection(Direction) - Method in interface nxopen.linedesigner.TypedConnectorFeatureBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setConnectorExpressionPropagationList(Expression[]) - Method in interface nxopen.linedesigner.TypedConnectorFeatureBuilder

Returns the enter text string
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setConnectorName(String) - Method in interface nxopen.linedesigner.TypedConnectorFeatureBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setConnectorParallelToObjectDirection(Direction) - Method in interface nxopen.linedesigner.TypedConnectorFeatureBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setConnectorPoint(Point) - Method in interface nxopen.linedesigner.TypedConnectorFeatureBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setConnectorSize(int) - Method in interface nxopen.linedesigner.ResizeConnectorBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setConnectorType(ConnectorDevice.ComponentType) - Method in interface nxopen.routing.electrical.ConnectorDevice

Sets the connector type.

setConnectorTypeName(String) - Method in interface nxopen.linedesigner.TypedConnectorFeatureBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setConnectPart(boolean) - Method in interface nxopen.weld.JointmarkBuilder

License requirements: ugweld ("UG WELD")
.

setConnectURL(String) - Method in interface nxopen.mechatronics.PreferencesBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setConnectVector(Direction) - Method in interface nxopen.tooling.CoolingConnectBuilder

License requirements: None.

setConstantFittingSectionCount(int) - Method in interface nxopen.features.VarsweepBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setConstantLowerLimit(double) - Method in interface nxopen.cam.FeedsOptimizationData

License requirements: cam_base ("CAM BASE")
.

setConstantThickness(boolean) - Method in interface nxopen.features.sheetmetal.SolidPunchBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal") OR sheet_metal_design ("SHEET METAL DESIGN")
.

setConstantUpperLimit(double) - Method in interface nxopen.cam.FeedsOptimizationData

License requirements: cam_base ("CAM BASE")
.

setConstantValue(double) - Method in interface nxopen.motion.ScalarForceBuilder

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using ScalarForceBuilder.valueExpression() to query or edit it.

setConstantValue(double) - Method in interface nxopen.motion.ScalarTorqueBuilder

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using ScalarTorqueBuilder.constantValue() to query or edit it.

setConstName(String) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setConstrained(boolean) - Method in interface nxopen.features.FitSurfaceBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setConstrainedEndPoint1(Point) - Method in interface nxopen.features.AestheticFaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setConstrainedEndPoint2(Point) - Method in interface nxopen.features.AestheticFaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setConstrainedPlaneCSYS(CoordinateSystem) - Method in interface nxopen.features.GeneralConicBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setConstrainedPoint(Point) - Method in interface nxopen.mechanicalrouting.TransformBlockBuilder

License requirements: routing_base ("Routing Basic")
.

setConstrainedStartPoint1(Point) - Method in interface nxopen.features.AestheticFaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setConstrainedStartPoint2(Point) - Method in interface nxopen.features.AestheticFaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setConstraint(AttributeTemplatesBuilder.ConstraintOptions) - Method in interface nxopen.AttributeTemplatesBuilder

License requirements: None.

setConstraint(MatchSurfaceBuilder.MatchConstaint) - Method in interface nxopen.geometricutilities.MatchSurfaceBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING")
.

setConstraint(PointSetAlignmentBuilder.ConstraintOptions) - Method in interface nxopen.geometricutilities.PointSetAlignmentBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setConstraint(boolean) - Method in interface nxopen.tooling.MoldFillingBuilder

License requirements: ug_mold_design ("UG MOLD")
.

setConstraintAlignment(Constraint.Alignment) - Method in interface nxopen.positioning.Constraint

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setConstraintChecking(boolean) - Method in interface nxopen.cae.optimization.DAOStopCondition

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setConstraintCollectionType(ComponentConstraintGroup.ConstraintsCollectionType) - Method in interface nxopen.positioning.ComponentConstraintGroup

Sets the type of constraint collection that is performed using the defining components.

setConstraintCollectionType(ComponentConstraintGroup.ConstraintsCollectionType) - Method in interface nxopen.positioning.ComponentConstraintGroupBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setConstraintColor(int) - Method in interface nxopen.preferences.SubdivisionModelingPreferences

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setConstraintGroupName(String) - Method in interface nxopen.positioning.ComponentConstraintGroupBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setConstraintInformation(boolean, int[], int[], int[], int[], int[], int[], TaggedObject[], TaggedObject[], Point[], Point[], double[], double[]) - Method in interface nxopen.bodydes.OnestepUnformBuilder

Set constraint information.

setConstraintName(String) - Method in interface nxopen.features.sheetmetal.SMBoundaryConditionBuilder

License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setConstraintPlane(CoordinateSystem) - Method in interface nxopen.features.PolylineBuilder

License requirements: features_modeling ("FEATURES MODELING")
.

setConstraintPlane(CoordinateSystem) - Method in interface nxopen.features.StudioSplineBuilderEx

License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setConstraintPoint(Point) - Method in interface nxopen.routing.StockOffsetPointBuilder

Sets the point that defines the location of the selected point.

setConstraintReferenceHalfSpace(ConstraintReference.HalfSpace) - Method in interface nxopen.positioning.ConstraintReference

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setConstraints(SimConstraint[]) - Method in interface nxopen.cae.ImportSimulationBuilder

Set selected constraints to import
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setConstraints(DatumConstraint[]) - Method in interface nxopen.features.DatumBuilder

Sets the contraint objects that define the positioning of this datum.

setConstraintSymbolSize(double) - Method in interface nxopen.preferences.SessionSketch

Sets the constraint symbol size.

setConstraintSymbolSize(double) - Method in interface nxopen.preferences.SketchPreferences

Sets the constraint symbol size
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setConstraintType(OnestepUnformBuilder.Constraint) - Method in interface nxopen.bodydes.OnestepUnformBuilder

License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setConstraintType(TBSConstraintBuilder.ConstraintOption) - Method in interface nxopen.cae.optimization.TBSConstraintBuilder

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setConstraintType(DatumConstraint.Type) - Method in interface nxopen.DatumConstraint

Sets
License requirements: solid_modeling ("SOLIDS MODELING")
.

setConstraintType(SMBoundaryConditionBuilder.ConstraintTypes) - Method in interface nxopen.features.sheetmetal.SMBoundaryConditionBuilder

License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setConstraintType(Constraint.Type) - Method in interface nxopen.positioning.Constraint

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setConstraintType(SketchConstraintBuilder.Constraint) - Method in interface nxopen.SketchConstraintBuilder

License requirements: None.

setConstructGeometryColor(NXColor) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setConstructGeometryFont(PedestrianProtectionBuilder.Font) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setConstructGeometryLayer(int) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setConstructGeometryWidth(PedestrianProtectionBuilder.Width) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setConstruction(ThroughCurveMeshBuilder.ConstructionMethod) - Method in interface nxopen.features.ThroughCurveMeshBuilder

License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

setConstruction(ThroughCurvesBuilder.ConstructionMethod) - Method in interface nxopen.features.ThroughCurvesBuilder

License requirements: features_modeling ("FEATURES MODELING") OR nx_freeform_1 ("basic freeform modeling")
.

setConstructionFeatures(ConstructionFeatureData[]) - Method in interface nxopen.features.CustomFeaturePreUpdateEvent

The custom feature construction features
License requirements: solid_modeling ("SOLIDS MODELING")
.

setConstructionMethod(FilletBuilder.EnumConstructionMethod) - Method in interface nxopen.weld.FilletBuilder

License requirements: ugweld ("UG WELD")
.

setConstructionMethod(JointmarkBuilder.Method) - Method in interface nxopen.weld.JointmarkBuilder

License requirements: ugweld ("UG WELD")
.

setConstructionMethodOption(RollingLineBuilder.ConstructionMethodTypes) - Method in interface nxopen.features.shipdesign.RollingLineBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setContactAreaFunction(MotionFunction) - Method in interface nxopen.motion.TirePropertyAdvancedParameters

License requirements: mechanisms ("MECHANISMS")
.

setContactBnd(boolean) - Method in interface nxopen.cam.FlowBuilder

License requirements: None.

setContactEdgeEndPoint(Point) - Method in interface nxopen.cae.ContactMeshBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setContactEdgeStartPoint(Point) - Method in interface nxopen.cae.ContactMeshBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setContactLengthWidth(boolean) - Method in interface nxopen.motion.TirePropertyCdBuilder

License requirements: mechanisms ("MECHANISMS")
.

setContactMethod(TirePropertyTnoBuilder.ContactMethodType) - Method in interface nxopen.motion.TirePropertyTnoBuilder

License requirements: mechanisms ("MECHANISMS")
.

setContactName(String) - Method in interface nxopen.motion.CurveContactBuilder

License requirements: mechanisms ("MECHANISMS")
.

setContactOffset(double) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setContactPoint(Point) - Method in interface nxopen.mechatronics.RackPinionBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setContactPoint(Point) - Method in interface nxopen.motion.CouplerBuilder

Sets the contact point
License requirements: None.

setContactPointGlobal(boolean) - Method in interface nxopen.motion.TirePropertyCdBuilder

License requirements: mechanisms ("MECHANISMS")
.

setContactPointRoadRef(boolean) - Method in interface nxopen.motion.TirePropertyCdBuilder

License requirements: mechanisms ("MECHANISMS")
.

setContactPositionRingHeight(DmCmBuilder.ContactPositionRingHeightType) - Method in interface nxopen.cam.DmCmBuilder

License requirements: cam_base ("CAM BASE")
.

setContactType(CfdContactPreventionConstraintBuilder.Contact) - Method in interface nxopen.cae.CfdContactPreventionConstraintBuilder

License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")
.

setContactTypeOption(BodyContactRecurdyn.ContactType) - Method in interface nxopen.motion.BodyContactRecurdyn

License requirements: mechanisms ("MECHANISMS")
.

setContactTypeOption(LsdynaGeometryPreparationBuilder.ContactType) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setContainer(CaeCloneManager.CloneOption, String) - Method in interface nxopen.pdm.CaeCloneManager

Deprecated.

Deprecated in NX10.0.0. Use PartOperationCopyBuilder instead.

setContainerFile(String) - Method in interface nxopen.tooling.ReusableObject

License requirements: None.

setContainerName(String) - Method in interface nxopen.features.shipdesign.ShipContainerBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setContainerPart(String) - Method in interface nxopen.features.shipdesign.ShipContainerBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setContainment(Tag) - Method in interface nxopen.uf.UFModeling

Refer to UF_MODL_set_containment for documentation.

setContainmentType(EditSubopCommand.ContainmentTypes) - Method in interface nxopen.cam.EditSubopCommand

License requirements: None.

setContent(String) - Method in interface nxopen.markup.Text

License requirements: None.

setContent(String) - Method in interface nxopen.openxml.TextDocumentData

Sets the content to be exported of text data
License requirements: None.

setContentDefinition(ContentDefinition) - Method in interface nxopen.assemblies.Subset

Set a new ContentDefinition object on the Subset.

setContentDefinition(ContentDefinition) - Method in interface nxopen.assemblies.SubsetBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setContentDefinition(ContentDefinition) - Method in interface nxopen.pdm.ConfigurationContextBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setContentOrder(HoleTableSettingsContentBuilder.Content[]) - Method in interface nxopen.annotations.HoleTableSettingsContentBuilder

Sets content order
License requirements: drafting ("DRAFTING")
.

setContents(ArbitraryAreaSeedBuilder[]) - Method in interface nxopen.annotations.ArbitraryAreaSeedBuilderList

Sets the contents of the entire list.

setContents(DatumReferenceBuilder[]) - Method in interface nxopen.annotations.DatumReferenceBuilderList

Sets the contents of the entire list.

setContents(FeatureControlFrameDataBuilder[]) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilderList

Sets the contents of the entire list.

setContents(LeaderData[]) - Method in interface nxopen.annotations.LeaderDataList

Sets the contents of the entire list.

setContents(MasterSymbolListItemBuilder[]) - Method in interface nxopen.annotations.MasterSymbolListItemBuilderList

Sets the contents of the entire list.

setContents(SymbolCatalogParameterBuilder[]) - Method in interface nxopen.annotations.SymbolCatalogParameterBuilderList

Sets the contents of the entire list.

setContents(TitleBlockCellBuilder[]) - Method in interface nxopen.annotations.TitleBlockCellBuilderList

Sets the contents of the entire list.

setContents(Partition[]) - Method in interface nxopen.assemblies.PartitionList

Sets the contents of the entire list.

setContents(Body[]) - Method in interface nxopen.BodyList

Sets the contents of the entire list.

setContents(DependentMeshListItemBuilder[]) - Method in interface nxopen.cae.DependentMeshListItemBuilderList

Sets the contents of the entire list.

setContents(ManualSweepBetweenListItemSelection[]) - Method in interface nxopen.cae.ManualSweepBetweenListItemSelectionList

Sets the contents of the entire list.

setContents(MeshManualSweepBetweenListItemSelection[]) - Method in interface nxopen.cae.MeshManualSweepBetweenListItemSelectionList

Sets the contents of the entire list.

setContents(BoundaryMemberSet[]) - Method in interface nxopen.cam.BoundaryMemberSetList

Sets the contents of the entire list.

setContents(BoundarySet[]) - Method in interface nxopen.cam.BoundarySetList

Sets the contents of the entire list.

setContents(BoundaryTurnVariableStockSet[]) - Method in interface nxopen.cam.BoundaryTurnVariableStockSetList

Sets the contents of the entire list.

setContents(CAMFeature[]) - Method in interface nxopen.cam.CAMFeatureList

Sets the contents of the entire list.

setContents(CollisionPairBuilder[]) - Method in interface nxopen.cam.CollisionPairBuilderList

Sets the contents of the entire list.

setContents(CustomLoopSet[]) - Method in interface nxopen.cam.CustomLoopSetList

Sets the contents of the entire list.

setContents(CutVolume[]) - Method in interface nxopen.cam.CutVolumeList

Sets the contents of the entire list.

setContents(DriveChainItemBuilder[]) - Method in interface nxopen.cam.DriveChainItemBuilderList

Sets the contents of the entire list.

setContents(GeometrySet[]) - Method in interface nxopen.cam.GeometrySetList

Sets the contents of the entire list.

setContents(HoldingSystemBuilder[]) - Method in interface nxopen.cam.HoldingSystemBuilderList

Sets the contents of the entire list.

setContents(HoleBossSet[]) - Method in interface nxopen.cam.HoleBossSetList

Sets the contents of the entire list.

setContents(InPathEventDataBuilder[]) - Method in interface nxopen.cam.InPathEventDataBuilderList

Sets the contents of the entire list.

setContents(LaserControlPoint[]) - Method in interface nxopen.cam.LaserControlPointList

Sets the contents of the entire list.

setContents(ManualFeatureBuilder[]) - Method in interface nxopen.cam.ManualFeatureBuilderList

Sets the contents of the entire list.

setContents(Splitter[]) - Method in interface nxopen.cam.SplitterList

Sets the contents of the entire list.

setContents(SurfaceDriveGeometrySet[]) - Method in interface nxopen.cam.SurfaceDriveGeometrySetList

Sets the contents of the entire list.

setContents(TabPointDataBuilder[]) - Method in interface nxopen.cam.TabPointDataBuilderList

Sets the contents of the entire list.

setContents(ThreadedBossSet[]) - Method in interface nxopen.cam.ThreadedBossSetList

Sets the contents of the entire list.

setContents(ThreadedHoleSet[]) - Method in interface nxopen.cam.ThreadedHoleSetList

Sets the contents of the entire list.

setContents(ToolPathSplitItemBuilder[]) - Method in interface nxopen.cam.ToolPathSplitItemBuilderList

Sets the contents of the entire list.

setContents(Ude[]) - Method in interface nxopen.cam.UdeList

Sets the contents of the entire list.

setContents(WedmCustomBoundaryDataBuilder[]) - Method in interface nxopen.cam.WedmCustomBoundaryDataBuilderList

Sets the contents of the entire list.

setContents(WireGuide[]) - Method in interface nxopen.cam.WireGuideList

Sets the contents of the entire list.

setContents(DateItemBuilder[]) - Method in interface nxopen.DateItemBuilderList

Sets the contents of the entire list.

setContents(DieAssistantFlangeProfile[]) - Method in interface nxopen.die.DieAssistantFlangeProfileList

Sets the contents of the entire list.

setContents(DieAssistantTrimProfile[]) - Method in interface nxopen.die.DieAssistantTrimProfileList

Sets the contents of the entire list.

setContents(DieBooleanBuilder[]) - Method in interface nxopen.die.DieBooleanBuilderList

Sets the contents of the entire list.

setContents(DieLimitsBuilder[]) - Method in interface nxopen.die.DieLimitsBuilderList

Sets the contents of the entire list.

setContents(DieLocationBuilder[]) - Method in interface nxopen.die.DieLocationBuilderList

Sets the contents of the entire list.

setContents(DrawBeadSegmentBuilder[]) - Method in interface nxopen.die.DrawBeadSegmentBuilderList

Sets the contents of the entire list.

setContents(PierceItemBuilder[]) - Method in interface nxopen.die.PierceItemBuilderList

Sets the contents of the entire list.

setContents(PointCloudClippingBoxesListItemBuilder[]) - Method in interface nxopen.display.PointCloudClippingBoxesListItemBuilderList

Sets the contents of the entire list.

setContents(AttributeItemBuilder[]) - Method in interface nxopen.drafting.AttributeItemBuilderList

Sets the contents of the entire list.

setContents(PrimaryContentItemBuilder[]) - Method in interface nxopen.drafting.PrimaryContentItemBuilderList

Sets the contents of the entire list.

setContents(SectionLineSegmentBuilder[]) - Method in interface nxopen.drawings.SectionLineSegmentBuilderList

Sets the contents of the entire list.

setContents(SectionLineSegmentPointBuilder[]) - Method in interface nxopen.drawings.SectionLineSegmentPointListBuilder

Sets array of SectionLineSegmentPointBuilder objects in the list.

setContents(ShipDraftingViewLinesBuilder[]) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilderList

Sets the contents of the entire list.

setContents(String, String[]) - Method in interface nxopen.drawings.ViewStyleFPCalloutConfigBuilder

Sets the contents for a Flat Pattern callout type
License requirements: drafting ("DRAFTING")
.

setContents(ViewStyleShipbuildingLinesBuilder[]) - Method in interface nxopen.drawings.ViewStyleShipbuildingLinesBuilderList

Sets the contents of the entire list.

setContents(ExpressionCollectorSet[]) - Method in interface nxopen.ExpressionCollectorSetList

Sets the contents of the entire list.

setContents(ExpressionSectionSet[]) - Method in interface nxopen.ExpressionSectionSetList

Sets the contents of the entire list.

setContents(Feature[]) - Method in interface nxopen.features.FeatureList

Sets the contents of the entire list.

setContents(GeometricConstraintData[]) - Method in interface nxopen.features.GeometricConstraintDataManager

Sets array of GeometricConstraintData objects in the list.

setContents(GeometricConstraintDataManager[]) - Method in interface nxopen.features.GeometricConstraintDataSetManager

Sets array of manager objects in the list.

setContents(GlobalShapingCurveOffsetBuilder[]) - Method in interface nxopen.features.GlobalShapingCurveOffsetBuilderList

Sets the contents of the entire list.

setContents(GlobalShapingPointOffsetBuilder[]) - Method in interface nxopen.features.GlobalShapingPointOffsetBuilderList

Sets the contents of the entire list.

setContents(PartGeometryCopySelectBuilder[]) - Method in interface nxopen.features.PartGeometryCopySelectBuilderList

Sets the contents of the entire list.

setContents(PointSetFacePercentageBuilder[]) - Method in interface nxopen.features.PointSetFacePercentageBuilderList

Sets the contents of the entire list.

setContents(RegionListItemBuilder[]) - Method in interface nxopen.features.RegionListItemBuilderList

Sets the contents of the entire list.

setContents(JoggleInputListItemBuilder[]) - Method in interface nxopen.features.sheetmetal.JoggleInputListItemBuilderList

Sets the contents of the entire list.

setContents(SMBoundaryConditionBuilder[]) - Method in interface nxopen.features.sheetmetal.SMBoundaryConditionBuilderList

Sets the contents of the entire list.

setContents(AnchorPoint[]) - Method in interface nxopen.features.shipdesign.AnchorPointList

Sets the contents of the entire list.

setContents(BulkHeadListItemBuilder[]) - Method in interface nxopen.features.shipdesign.BulkHeadListItemBuilderList

Sets the contents of the entire list.

setContents(CornerCutListItemBuilder[]) - Method in interface nxopen.features.shipdesign.CornerCutListItemBuilderList

Sets the contents of the entire list.

setContents(DeckListItemBuilder[]) - Method in interface nxopen.features.shipdesign.DeckListItemBuilderList

Sets the contents of the entire list.

setContents(ItFrameListItemBuilder[]) - Method in interface nxopen.features.shipdesign.ItFrameListItemBuilderList

Sets the contents of the entire list.

setContents(OrientationRegionItemBuilder[]) - Method in interface nxopen.features.shipdesign.OrientationRegionItemBuilderList

Sets the contents of the entire list.

setContents(PlaneListBuilder[]) - Method in interface nxopen.features.shipdesign.PlaneListBuilderList

Sets the contents of the entire list.

setContents(PlateBoundaryOptionBuilder[]) - Method in interface nxopen.features.shipdesign.PlateBoundaryOptionBuilderList

Sets the contents of the entire list.

setContents(SeamBlockBuilder[]) - Method in interface nxopen.features.shipdesign.SeamBlockBuilderList

Sets the contents of the entire list.

setContents(SectionViewBuilder[]) - Method in interface nxopen.features.shipdesign.SectionViewBuilderList

Sets the contents of the entire list.

setContents(ShipNamesBuilder[]) - Method in interface nxopen.features.shipdesign.ShipNamesBuilderList

Sets the contents of the entire list.

setContents(StandardPartItemBuilder[]) - Method in interface nxopen.features.shipdesign.StandardPartItemBuilderList

Sets the contents of the entire list.

setContents(SteelInsulationBoundaryBuilder[]) - Method in interface nxopen.features.shipdesign.SteelInsulationBoundaryBuilderList

Sets the contents of the entire list.

setContents(SubSystemBuilder[]) - Method in interface nxopen.features.shipdesign.SubSystemBuilderList

Sets the contents of the entire list.

setContents(TransFrameListItemBuilder[]) - Method in interface nxopen.features.shipdesign.TransFrameListItemBuilderList

Sets the contents of the entire list.

setContents(SmoothRangeBuilder[]) - Method in interface nxopen.features.SmoothRangeBuilderList

Sets the contents of the entire list.

setContents(CageSectionData[]) - Method in interface nxopen.features.subdivision.CageSectionDataList

Sets the contents of the entire list.

setContents(VariableRadiusPointsBuilder[]) - Method in interface nxopen.features.VariableRadiusPointsBuilderList

Sets the contents of the entire list.

setContents(CloseRangeCameraListItemBuilder[]) - Method in interface nxopen.features.vehicledesign.CloseRangeCameraListItemBuilderList

Sets the contents of the entire list.

setContents(CloseRangeDemoCylinderListItemBuilder[]) - Method in interface nxopen.features.vehicledesign.CloseRangeDemoCylinderListItemBuilderList

Sets the contents of the entire list.

setContents(PathObjects[]) - Method in interface nxopen.fields.PathObjectsList

Sets the contents of the entire list.

setContents(BlendSetbackBuilder[]) - Method in interface nxopen.geometricutilities.BlendSetbackBuilderList

Sets the contents of the entire list.

setContents(BoundaryDefinitionBuilder[]) - Method in interface nxopen.geometricutilities.BoundaryDefinitionBuilderList

Sets the contents of the entire list.

setContents(BoundingObjectBuilder[]) - Method in interface nxopen.geometricutilities.BoundingObjectBuilderList

Sets the contents of the entire list.

setContents(EntityUsageInfo[]) - Method in interface nxopen.geometricutilities.EntityUsageInfoList

Sets the contents of the entire list.

setContents(FaceSetOffset[]) - Method in interface nxopen.geometricutilities.FaceSetOffsetList

Sets the contents of the entire list.

setContents(FtmFixedCurvesBuilder[]) - Method in interface nxopen.geometricutilities.FtmFixedCurvesBuilderList

Sets the contents of the entire list.

setContents(FtmTransformCurvesBuilder[]) - Method in interface nxopen.geometricutilities.FtmTransformCurvesBuilderList

Sets the contents of the entire list.

setContents(FtmTransformPointsBuilder[]) - Method in interface nxopen.geometricutilities.FtmTransformPointsBuilderList

Sets the contents of the entire list.

setContents(InstanceEditedExpressionItem[]) - Method in interface nxopen.geometricutilities.InstanceEditedExpressionItemList

Sets the contents of the entire list.

setContents(ParentEquivalencyMap[]) - Method in interface nxopen.geometricutilities.ParentEquivalencyMapList

Sets the contents of the entire list.

setContents(PatternIncrementItem[]) - Method in interface nxopen.geometricutilities.PatternIncrementItemList

Sets the contents of the entire list.

setContents(PatternSpacingsListItem[]) - Method in interface nxopen.geometricutilities.PatternSpacingsListItemList

Sets the contents of the entire list.

setContents(ReduceSurfaceRadiusFaceGroupBuilder[]) - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusFaceGroupBuilderList

Sets the contents of the entire list.

setContents(RotationSetBuilder[]) - Method in interface nxopen.geometricutilities.RotationSetBuilderList

Sets the contents of the entire list.

setContents(ScalingSetBuilder[]) - Method in interface nxopen.geometricutilities.ScalingSetBuilderList

Sets the contents of the entire list.

setContents(SelectionList[]) - Method in interface nxopen.geometricutilities.SelectionListList

Sets the contents of the entire list.

setContents(SpinePlaneBuilder[]) - Method in interface nxopen.geometricutilities.SpinePlaneBuilderList

Sets the contents of the entire list.

setContents(StyledSweepDoubleOnPathDimBuilder[]) - Method in interface nxopen.geometricutilities.StyledSweepDoubleOnPathDimBuilderList

Sets the contents of the entire list.

setContents(TransitionCurveBuilder[]) - Method in interface nxopen.geometricutilities.TransitionCurveBuilderList

Sets the contents of the entire list.

setContents(TransitionLawNodeBuilder[]) - Method in interface nxopen.geometricutilities.TransitionLawNodeBuilderList

Sets the contents of the entire list.

setContents(TwoExpressionsCollectorSet[]) - Method in interface nxopen.geometricutilities.TwoExpressionsCollectorSetList

Sets the contents of the entire list.

setContents(TwoExpressionsSectionSet[]) - Method in interface nxopen.geometricutilities.TwoExpressionsSectionSetList

Sets the contents of the entire list.

setContents(boolean) - Method in interface nxopen.layout2d.ExportComponentHierarchyBuilder

License requirements: nx_layout ("NX Layout")
.

setContents(ListCreator[]) - Method in interface nxopen.ListCreatorList

Sets the contents of the entire list.

setContents(PathTransitionBuilder[]) - Method in interface nxopen.mechanicalrouting.PathTransitionBuilderList

Sets the contents of the entire list.

setContents(ExternalConnectionElementBuilder[]) - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilderList

Sets the contents of the entire list.

setContents(GanttOperationConditionBuilder[]) - Method in interface nxopen.mechatronics.GanttOperationConditionBuilderList

Sets the contents of the entire list.

setContents(GanttOperationParameterBuilder[]) - Method in interface nxopen.mechatronics.GanttOperationParameterBuilderList

Sets the contents of the entire list.

setContents(MATLABSignalConnectionBuilder[]) - Method in interface nxopen.mechatronics.MATLABSignalConnectionBuilderList

Sets the contents of the entire list.

setContents(PathConstraintFrameBuilder[]) - Method in interface nxopen.mechatronics.PathConstraintFrameBuilderList

Sets the contents of the entire list.

setContents(ProxyObjectParameterBuilder[]) - Method in interface nxopen.mechatronics.ProxyObjectParameterBuilderList

Sets the contents of the entire list.

setContents(RuntimeFormulaParameterBuilder[]) - Method in interface nxopen.mechatronics.RuntimeFormulaParameterBuilderList

Sets the contents of the entire list.

setContents(SensorsActuatorsListBuilder[]) - Method in interface nxopen.mechatronics.SensorsActuatorsListBuilderList

Sets the contents of the entire list.

setContents(SHMSignalConnectionBuilder[]) - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilderList

Sets the contents of the entire list.

setContents(SignalConnectionBuilder[]) - Method in interface nxopen.mechatronics.SignalConnectionBuilderList

Sets the contents of the entire list.

setContents(ConfigurationParameter[]) - Method in interface nxopen.motion.ConfigurationParameterList

Sets the contents of the entire list.

setContents(ControlInputPortBuilder[]) - Method in interface nxopen.motion.ControlInputPortBuilderList

Sets the contents of the entire list.

setContents(InputPortAssociation[]) - Method in interface nxopen.motion.InputPortAssociationList

Sets the contents of the entire list.

setContents(OutputPortAssociation[]) - Method in interface nxopen.motion.OutputPortAssociationList

Sets the contents of the entire list.

setContents(PortVariable[]) - Method in interface nxopen.motion.PortVariableList

Sets the contents of the entire list.

setContents(SegmentBuilder[]) - Method in interface nxopen.motion.SegmentBuilderList

Sets the contents of the entire list.

setContents(SignalChartListItem[]) - Method in interface nxopen.motion.SignalChartListItemList

Sets the contents of the entire list.

setContents(NXObject[]) - Method in interface nxopen.NXObjectList

Sets the contents of the entire list.

setContents(TaggedObject[]) - Method in interface nxopen.ObjectList

Sets the contents of the entire list.

setContents(Plane[]) - Method in interface nxopen.PlaneList

Sets the contents of the entire list.

setContents(Point[]) - Method in interface nxopen.PointList

Sets the contents of the entire list.

setContents(RegionPoint[]) - Method in interface nxopen.RegionPointList

Sets the contents of the entire list.

setContents(RunItemsBuilder[]) - Method in interface nxopen.routing.RunItemsBuilderList

Sets the contents of the entire list.

setContents(ScCollector[]) - Method in interface nxopen.ScCollectorList

Sets the contents of the entire list.

setContents(Section[]) - Method in interface nxopen.SectionList

Sets the contents of the entire list.

setContents(KinematicChain[]) - Method in interface nxopen.sim.KinematicChainList

Sets the contents of the entire list.

setContents(KinematicChannelBuilder[]) - Method in interface nxopen.sim.KinematicChannelBuilderList

Sets the contents of the entire list.

setContents(KinematicJunctionBuilder[]) - Method in interface nxopen.sim.KinematicJunctionBuilderList

Sets the contents of the entire list.

setContents(TaggedObject[]) - Method in interface nxopen.TaggedObjectList

Sets the contents of the entire list.

setContents(SelectReuseLibraryListItemBuilder[]) - Method in interface nxopen.tooling.SelectReuseLibraryListItemBuilderList

Sets the contents of the entire list.

setContents(ShimInnerProfileSetBuilder[]) - Method in interface nxopen.tooling.ShimInnerProfileSetBuilderList

Sets the contents of the entire list.

setContents(JointItemBuilder[]) - Method in interface nxopen.weld.JointItemBuilderList

Sets the contents of the entire list.

setContents(JointmarkFaceSetsBuilder[]) - Method in interface nxopen.weld.JointmarkFaceSetsBuilderList

Sets the contents of the entire list.

setContents(JointmarkGuideBuilder[]) - Method in interface nxopen.weld.JointmarkGuideBuilderList

Sets the contents of the entire list.

setContents(JointmarkPointsBuilder[]) - Method in interface nxopen.weld.JointmarkPointsBuilderList

Sets the contents of the entire list.

setContents(WeldBeadPathBuilder[]) - Method in interface nxopen.weld.WeldBeadPathBuilderList

Sets the contents of the entire list.

setContents(WeldBeadSizeBuilder[]) - Method in interface nxopen.weld.WeldBeadSizeBuilderList

Sets the contents of the entire list.

setContents(WeldFillStripBuilder[]) - Method in interface nxopen.weld.WeldFillStripBuilderList

Sets the contents of the entire list.

setContext(SnapshotSubsetBuilder.ContextType) - Method in interface nxopen.issue.SnapshotSubsetBuilder

License requirements: nx_issue_mgmt ("NX Issue Tracking")
.

setContext(BasePart) - Method in interface nxopen.mechatronics.GanttOperationBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setContext(BasePart) - Method in interface nxopen.mechatronics.ProxyObjectBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setContext(BasePart) - Method in interface nxopen.mechatronics.ProxyOverrideObjectBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setContext(String) - Method in interface nxopen.pdm.AlternateIdManager

Sets the value of a context.

setContext(MatingConverter.PartContext) - Method in interface nxopen.positioning.MatingConverter

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setContextAssembly(String) - Method in interface nxopen.drawings.ConvertDraftingContentsBuilder

Context assembly part file path
License requirements: convert_to_pmi (" Convert To PMI"), drafting ("DRAFTING")
.

setContextAttribute(int) - Method in interface nxopen.features.shipdesign.QualifySketchBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setContextAttribute(String) - Method in interface nxopen.features.shipdesign.ShipNamesBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setContextComponent(Component) - Method in interface nxopen.features.AssemblyCutBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setContextDebug(int) - Method in interface nxopen.uf.UFHelp

Refer to UF_HELP_set_context_debug for documentation.

setContextEntity(TaggedObject) - Method in interface nxopen.features.shipdesign.SteelFeatureSpreadsheetBuilder

Set the context entity on which the context attribute is stored.

setContextOperation(PartBuilder.Operation) - Method in interface nxopen.pdm.PartBuilder

Sets explicitly the place from where part selection dialog invoked into builder.

setContextValues(Part, Part, View, NXObject) - Method in interface nxopen.features.shipdesign.PenetrationUtils

Set the CONTEXT values
License requirements: nx_penetration_mgmt ("Penetration Management")
.

setContinuationNote(String) - Method in interface nxopen.annotations.TableSectionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setContinuationProperty(TableSectionStyleBuilder.ContinuationPropertyType) - Method in interface nxopen.annotations.TableSectionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setContinuationSpacing(double) - Method in interface nxopen.annotations.TableSectionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setContinueProcessing(boolean) - Method in interface nxopen.drafting.DrawingAutomationWizard

Sets the flag denoting whether or not to create the booklet in the current session
License requirements: None.

setContinueUpdateOnError(RoutingPath.ContinueUpdOnError) - Method in interface nxopen.preferences.RoutingPath

License requirements: routing_base ("Routing Basic")
.

setContinueZoneIndexingAcrossSheets(boolean) - Method in interface nxopen.drawings.SheetZoneSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setContinuity(BlendCornerBuilder.ContinuityTypes) - Method in interface nxopen.features.BlendCornerBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setContinuity(SubdivisionBridgeFaceBuilder.ContinuityType) - Method in interface nxopen.features.subdivision.SubdivisionBridgeFaceBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setContinuity(SubdivisionExtrudeCageBuilder.ContinuityType) - Method in interface nxopen.features.subdivision.SubdivisionExtrudeCageBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setContinuity(SubdivisionFillBuilder.ContinuityType) - Method in interface nxopen.features.subdivision.SubdivisionFillBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setContinuity(SubdivisionLoftBuilder.ContinuityType) - Method in interface nxopen.features.subdivision.SubdivisionLoftBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setContinuity(SubdivisionRevolveBuilder.ContinuityType) - Method in interface nxopen.features.subdivision.SubdivisionRevolveBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setContinuity(SubdivisionSweepBuilder.ContinuityType) - Method in interface nxopen.features.subdivision.SubdivisionSweepBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setContinuityType(SubdivisionConnectCageBuilder.ContinuityTypes) - Method in interface nxopen.features.subdivision.SubdivisionConnectCageBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setContinuityType(SubdivisionSetContinuityBuilder.ContinuityTypes) - Method in interface nxopen.features.subdivision.SubdivisionSetContinuityBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setContinuityType(Continuity.ContinuityTypes) - Method in interface nxopen.geometricutilities.Continuity

License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

setContinuityTypeOption(MeshTransformerBuilder.ContinuityType) - Method in interface nxopen.features.MeshTransformerBuilder

License requirements: None.

setContinuousAutoDimensioning(boolean) - Method in interface nxopen.preferences.SessionSketch

Sets the continuous auto dimensioning state in sketch preferences.

setContinuousAutoDimensioningSetting(boolean) - Method in interface nxopen.preferences.SketchPreferences

Sets the option to set continuous auto dimensioning in a sketch on or off.

setContinuousCut(boolean) - Method in interface nxopen.cam.CylindricalMillingCutParameters

License requirements: cam_base ("CAM BASE")
.

setContourFlag(boolean) - Method in interface nxopen.features.sheetmetal.AeroFlangeBuilder

Set the flag that turns on/off the visibility of Contour Curve
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setContourHeight(String) - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. Use WeldGrooveBuilder.contourHeight() instead.

setContouringLevel(int) - Method in interface nxopen.cae.xyplot.BaseGridLayoutStyleSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setContouringRange(ContouringRange) - Method in interface nxopen.cae.xyplot.BaseGridLayoutStyleSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setContourRefinement(int) - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setContourShape(WeldContourShape) - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. Use WeldGrooveBuilder.contourType() instead.

setContourShift(double) - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setContourSymbol(LineWeldDataBuilder.ContourSymbolType) - Method in interface nxopen.annotations.LineWeldDataBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setContourType(FilletBuilder.EnumContour) - Method in interface nxopen.weld.FilletBuilder

License requirements: ugweld ("UG WELD")
.

setContourType(PlugSlotBuilder.EnumContour) - Method in interface nxopen.weld.PlugSlotBuilder

License requirements: None.

setContourType(WeldGrooveBuilder.Contour) - Method in interface nxopen.weld.WeldGrooveBuilder

License requirements: ugweld ("UG WELD")
.

setContributorNumber(int) - Method in interface nxopen.cae.responsesimulation.FrequencyDefinition

License requirements: nx_response_anlys ("NX Response Analysis")
.

setControl(NXObject) - Method in interface nxopen.routing.RouteLogicalAssociation

Sets the control for LogicalAssocition
License requirements: routing_harness ("Routing Harness")
.

setControlDataFile(String) - Method in interface nxopen.tooling.MotionSimulationBuilder

License requirements: None.

setControlledNoteTitle(int) - Method in interface nxopen.annotations.BaseCustomSymbolBuilder

License requirements: drafting ("DRAFTING")
.

setControllerLanguage(String) - Method in interface nxopen.sim.MachineToolConfiguration

Sets the controller language
License requirements: None.

setControllerLine(MachineToolConfiguration.ControllerLines) - Method in interface nxopen.sim.MachineToolConfiguration

License requirements: None.

setControllerName(String) - Method in interface nxopen.sim.postconfigurator.CreationPostBuilder

License requirements: nx_post_config_full ("NX Post Configurator") OR nx_post_config_adv ("NX Post Configurator")
.

setControllerType(String) - Method in interface nxopen.sim.MachineToolConfiguration

License requirements: None.

setControllerVersion(String) - Method in interface nxopen.sim.MachineToolConfiguration

Sets the controller version
License requirements: None.

setControlMethod(DatumCommonBuilder.ControlMethodTypes) - Method in interface nxopen.weld.DatumCommonBuilder

License requirements: ugweld ("UG WELD")
.

setControlPoint(ControlPoint) - Method in interface nxopen.routing.BranchPathNumberingBuilder

Set the control point for the start of the labeling sequence
License requirements: routing_hvac ("Routing HVAC")
.

setControlPoint(Point) - Method in interface nxopen.SketchConicBuilder

License requirements: None.

setControlPoint(Point) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder

License requirements: None.

setControlPoint(Point) - Method in interface nxopen.tooling.InsertEditToolsBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setControlPointDefiningObject(ControlPoint, Point3d, NXObject) - Method in interface nxopen.routing.LinearPathBuilder

Fully defines a preview control point.

setControlPointDefiningPoint(ControlPoint, Point) - Method in interface nxopen.routing.LinearPathBuilder

Fully defines a preview control point using the given point.

setControlPointEnd(ControlPoint) - Method in interface nxopen.routing.IPath

License requirements: routing_base ("Routing Basic")
.

setControlPointFromSegment(ISegment) - Method in interface nxopen.routing.BranchPathNumberingBuilder

Set the control point for the start of the labeling sequence
License requirements: routing_hvac ("Routing HVAC")
.

setControlPointOffset(HoleDrillingBuilder.ControlPointOffsetType) - Method in interface nxopen.cam.HoleDrillingBuilder

License requirements: cam_base ("CAM BASE")
.

setControlPointStart(ControlPoint) - Method in interface nxopen.routing.IPath

License requirements: routing_base ("Routing Basic")
.

setControlPointType(HoleMakingBuilder.ControlPointTypes) - Method in interface nxopen.cam.HoleMakingBuilder

License requirements: cam_base ("CAM BASE")
.

setControlRegion(SectionSurfaceBuilder.ControlRegionEnum) - Method in interface nxopen.features.SectionSurfaceBuilder

Deprecated.

Deprecated in NX9.0.0. Use SectionSurfaceBuilderEx instead.

setControlRegion(SectionSurfaceBuilderEx.ControlRegionType) - Method in interface nxopen.features.SectionSurfaceBuilderEx

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setControlSheet(Body) - Method in interface nxopen.features.GlobalShapingBuilder

Control sheet
License requirements: solid_modeling ("SOLIDS MODELING")
.

setControlSurface(Body) - Method in interface nxopen.features.OvercrownBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setControlTextIndex(int) - Method in interface nxopen.annotations.CustomSymbolTextData

Deprecated.

Deprecated in NX9.0.0. Use MasterSymbolListItemBuilder instead. Use BaseCustomSymbolBuilder.texts() to query list of custom symbol texts.

setControlType(LeadAngles.ControlTypes) - Method in interface nxopen.cam.LeadAngles

License requirements: cam_base ("CAM BASE")
.

setConvergenceSpeedType(OptimizationBuilder.OptimizationConvergenceSpeedType) - Method in interface nxopen.optimization.OptimizationBuilder

License requirements: None.

setConversionType(PartOperationImportBuilder.ConversionRule) - Method in interface nxopen.pdm.PartOperationImportBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setConvertAnalyticToConvergentAngularTolerance(double) - Method in interface nxopen.preferences.SessionModeling

License requirements: None.

setConvertAnalyticToConvergentDistanceTolerance(double) - Method in interface nxopen.preferences.SessionModeling

License requirements: None.

setConvertAnnotation(boolean) - Method in interface nxopen.drawings.ViewSettingsBuilder

License requirements: convert_to_pmi (" Convert To PMI"), drafting ("DRAFTING")
.

setConvertEccentricSegment(boolean) - Method in interface nxopen.routing.EditLineSegmentBuilder

Sets the conversion flag.

setConvertPrimaryTolerance(boolean) - Method in interface nxopen.annotations.UnitsStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setConvertPrimaryToleranceToDualDimensionUnit(boolean) - Method in interface nxopen.annotations.UnitsFormatPreferences

Sets the flag indicating whether to convert the primary tolerance to dual dimension unit
License requirements: None.

setConvertToLinkedBody(boolean) - Method in interface nxopen.features.PromotionBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setConvertToOriginalModelView(boolean) - Method in interface nxopen.drawings.AnnotationSettingsBuilder

License requirements: convert_to_pmi (" Convert To PMI"), drafting ("DRAFTING")
.

setConvertToReference(boolean) - Method in interface nxopen.SketchMakeSymmetricBuilder

License requirements: None.

setConvertToReference(boolean) - Method in interface nxopen.SketchMirrorBuilder

License requirements: None.

setConvertToReference(boolean) - Method in interface nxopen.SketchMirrorPatternBuilder

License requirements: None.

setConvertToReference(boolean) - Method in interface nxopen.SketchOffsetBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setConvertToSew(boolean) - Method in interface nxopen.features.BooleanBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setConvertType(AssignPatchBuilder.ConvertTypeOption) - Method in interface nxopen.tooling.AssignPatchBuilder

License requirements: None.

setConvertWorkPartAndLoadedChildrenOption(StockPartConverterBuilder.PartOption) - Method in interface nxopen.routing.StockPartConverterBuilder

License requirements: routing_base ("Routing Basic")
.

setConvexConcaveY(boolean) - Method in interface nxopen.features.EdgeBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setConvexCorner(WedmGeomBuilder.ConvexCornerTypes) - Method in interface nxopen.cam.WedmGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setConvexCorner(WedmOperationBuilder.ConvexCornerTypes) - Method in interface nxopen.cam.WedmOperationBuilder

License requirements: cam_base ("CAM BASE")
.

setConvexity(EmbossRegion.ConvexityOption) - Method in interface nxopen.features.EmbossRegion

Sets the convexity option
License requirements: solid_modeling ("SOLIDS MODELING")
.

setConvexityDirection(Direction) - Method in interface nxopen.die.SpringbackCompensationBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR nx_freeform_2 ("advanced freeform modeling")
.

setConvexityEnabled(boolean) - Method in interface nxopen.die.SpringbackCompensationBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR nx_freeform_2 ("advanced freeform modeling")
.

setConvexRadius(double) - Method in interface nxopen.facet.CurvatureBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setConvLayoutData(boolean) - Method in interface nxopen.DxfdwgImporter

License requirements: None.

setConvLayouts(DxfdwgImporter.ConvLayoutsAs) - Method in interface nxopen.DxfdwgImporter

License requirements: None.

setConvModelData(boolean) - Method in interface nxopen.DxfdwgImporter

License requirements: None.

setCoolant(String) - Method in interface nxopen.cam.CycleCoolant

License requirements: cam_base ("CAM BASE")
.

setCoolant(UFVariant, int, double) - Method in interface nxopen.uf.UFSim

Refer to UF_SIM_set_coolant for documentation.

setCoolantThrough(boolean) - Method in interface nxopen.cam.MillingToolBuilder

License requirements: None.

setCoordinate(int) - Method in interface nxopen.cae.AfuHeaderId

Sets the coordinate of AFU Header Id
License requirements: nx_ftk ("NX Advanced Graphing")
.

setCoordinate(double, double) - Method in interface nxopen.cae.PostAnnotationBuilder

Set the coordinates for user annotation
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setCoordinateAxes(String) - Method in interface nxopen.sim.KinematicChain

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setCoordinateOption(PointsFromFileBuilder.Options) - Method in interface nxopen.geometricutilities.PointsFromFileBuilder

Sets the option indicating type of point coordinates
License requirements: None.

setCoordinatePlane(String) - Method in interface nxopen.annotations.LocatorDesignatorBuilder

License requirements: None.

setCoordinatePlane(KinematicChain.CoordinatePlaneTypes) - Method in interface nxopen.sim.KinematicChain

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setCoordinates(Point3d) - Method in interface nxopen.cae.connections.CoordinatesLocation

Set the coordinates.

setCoordinates(Point3d) - Method in interface nxopen.cae.MeshPoint

Sets the coordinates of the point
License requirements: None.

setCoordinates(boolean) - Method in interface nxopen.cae.NodeElementInfoBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setCoordinates(Point3d) - Method in interface nxopen.Point

Sets the coordinates of the point
License requirements: None.

setCoordinates(Point3d) - Method in interface nxopen.SubdivisionMeshVertex

Sets the position of the vertex.

setCoordinateSystem(Result.CoordinateSystem) - Method in interface nxopen.cae.ClippingParameters

Set coordinate system
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setCoordinateSystem(LaminateGraphicalReportBuilder.CoordinateSystemType) - Method in interface nxopen.cae.LaminateGraphicalReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setCoordinateSystem(CoordinateSystem) - Method in interface nxopen.cae.responsesimulation.ElementalFunctionEvaluationSettingBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setCoordinateSystem(CoordinateSystem) - Method in interface nxopen.cae.responsesimulation.NodalFunctionEvaluationSettingBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setCoordinateSystem(CoordinateSystem) - Method in interface nxopen.cae.responsesimulation.PrlResultsEvaluationSettingBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setCoordinateSystem(Result.CoordinateSystem) - Method in interface nxopen.cae.ResultMeasureResultAllOptions

Set the coordinate system for directional components
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setCoordinateSystem(Result.CoordinateSystem) - Method in interface nxopen.cae.ResultMeasureResultDirectionOptions

Set the coordinate system for directional components
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setCoordinateSystem(Result.CoordinateSystem) - Method in interface nxopen.cae.ResultMeasureResultDirectionSectionOptions

Set the coordinate system for directional components
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setCoordinateSystem(Result.CoordinateSystem) - Method in interface nxopen.cae.ResultParameters

Set result coordinate system
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setCoordinateSystem(CoordinateSystem) - Method in interface nxopen.cae.ShellEADBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setCoordinateSystem(Point3d, Vector3d, Vector3d) - Method in interface nxopen.cam.fbm.Feature

Change the feature coordinate system
License requirements: cam_base ("CAM BASE")
.

setCoordinateSystem(CoordinateSystem) - Method in interface nxopen.cam.MachiningFeature

License requirements: cam_base ("CAM BASE")
.

setCoordinateSystem(CoordinateSystem) - Method in interface nxopen.features.FitSurfaceBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setCoordinateSystem(CoordinateSystem) - Method in interface nxopen.features.HelixBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setCoordinateSystem(CoordinateSystem) - Method in interface nxopen.features.LawCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setCoordinateSystem(CoordinateSystem) - Method in interface nxopen.features.shipdesign.PlatePreparationBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setCoordinateSystem(CoordinateSystem) - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setCoordinateSystem(CoordinateSystem) - Method in interface nxopen.features.shipdesign.WeldCut2Builder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setCoordinateSystem(CoordinateSystem) - Method in interface nxopen.geometricutilities.RectangularFrameBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setCoordinateSystem(CartesianCoordinateSystem) - Method in interface nxopen.WCS

Changes the coordinate system of the WCS to a new coordinate system.

setCoordinateSystemCartesianAtCsys(CartesianCoordinateSystem) - Method in interface nxopen.WCS

Creates a WCS at a new coordinate system.

setCoordinateSystemMatrix(Matrix3x3) - Method in interface nxopen.die.DieDirectionBuilder

License requirements: None.

setCoordinateSystemMatrix(Matrix3x3) - Method in interface nxopen.die.DieLocationBuilder

License requirements: None.

setCoordinateSystemMatrix(Matrix3x3) - Method in interface nxopen.die.DiePlaneBuilder

License requirements: ug_die_design ("Die Design")
.

setCoordinateSystemOffset(int) - Method in interface nxopen.cae.SolverAppendOption

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setCoordinateSystemOrigin(Point3d) - Method in interface nxopen.die.DieDirectionBuilder

License requirements: None.

setCoordinateSystemOrigin(Point3d) - Method in interface nxopen.die.DieLocationBuilder

License requirements: None.

setCoordinateSystemOrigin(Point3d) - Method in interface nxopen.die.DiePlaneBuilder

License requirements: ug_die_design ("Die Design")
.

setCoordinateSystemPropertyValue(String, CoordinateSystem) - Method in interface nxopen.BasePropertyTable

Sets the coordinate system CoordinateSystem
License requirements: None.

setCoordinateSystemType(GraphBuilder.CsysChoices) - Method in interface nxopen.motion.GraphBuilder

Deprecated.

Deprecated in NX11.0.0. Use Motion.GraphObjectBuilder instead.

setCoordinateX(double) - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setCoordinateX(double) - Method in interface nxopen.features.vehicledesign.BaseDataWheelBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setCoordinateY(double) - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setCoordinateY(double) - Method in interface nxopen.features.vehicledesign.BaseDataWheelBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setCoordinateZ(double) - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setCoordinateZ(double) - Method in interface nxopen.features.vehicledesign.BaseDataWheelBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setCoordSystem(CoordinateSystem) - Method in interface nxopen.features.shipdesign.CustomBracketBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setCoordSystem(CoordinateSystem) - Method in interface nxopen.features.shipdesign.Cutout2Builder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setCoordSystem(CoordinateSystem) - Method in interface nxopen.features.shipdesign.PillarBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setCoordSystem(CoordinateSystem) - Method in interface nxopen.features.shipdesign.ShipCutoutBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setCoordSystem(CoordinateSystem) - Method in interface nxopen.features.shipdesign.ShipEndCutBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setCoordSystem(CoordinateSystem) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setCoordSystem(CoordinateSystem) - Method in interface nxopen.features.shipdesign.WeldCutBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setCoordSystem(CoordinateSystem) - Method in interface nxopen.fields.SpatialMapBuilder

License requirements: None.

setCoordSystem(CoordinateSystem) - Method in interface nxopen.sim.SinumerikCaSimplifyBodiesBuilder

License requirements: nx_isv_mtb ("Machine Tool Builder") OR nx_sinumerik_ca ("Sinumerik Collision Avoidance")
.

setCopeStocks(Stock[]) - Method in interface nxopen.routing.CopeCorner

Set the ordered list of stocks to cope.

setCopiedAttributes(CharacteristicList) - Method in interface nxopen.routing.TransformPathBuilder

Set attributes to be copied.

setCopies(int) - Method in interface nxopen.PlotBuilder

License requirements: None.

setCopies(int) - Method in interface nxopen.PrintBuilder

License requirements: None.

setCopiousData(IgesImporter.CopiousDataEnum) - Method in interface nxopen.IgesImporter

License requirements: None.

setCoplanarAxesEnabled(boolean) - Method in interface nxopen.features.FaceRecognitionBuilder

License requirements: gateway ("UG GATEWAY")
.

setCoplanarEnabled(boolean) - Method in interface nxopen.features.FaceRecognitionBuilder

License requirements: gateway ("UG GATEWAY")
.

setCoplanarThreshold(double) - Method in interface nxopen.cae.FluidDomainBuilder

License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")
.

setCopy(boolean) - Method in interface nxopen.features.EnlargeBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setCopy(boolean) - Method in interface nxopen.features.MoveFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setCopyAllSheetsToggle(boolean) - Method in interface nxopen.tooling.MWCopySheetsBuilder

License requirements: None.

setCopyAndMirror(boolean) - Method in interface nxopen.die.FillBuilder

Sets the copy and mirror setting of the area fill
License requirements: die_engineering ("DIE ENGINEERING")
.

setCopyAttributeOnObjectCopy(boolean) - Method in interface nxopen.AttributeTemplatesBuilder

License requirements: None.

setCopyAttributesDefaultOrUserspecified(TransformPathBuilder.CopyAttributes) - Method in interface nxopen.routing.TransformPathBuilder

Deprecated.

Deprecated in NX8.5.0. This builder attribute is no longer required.

setCopyChamferLabels(boolean) - Method in interface nxopen.features.PatternFaceFeatureBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setCopyChoices(MakeUniquePartBuilder.Option) - Method in interface nxopen.assemblies.MakeUniquePartBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setCopyConnectedParts(boolean) - Method in interface nxopen.routing.TransformPathBuilder

Sets the method indicates whether connected parts get copied or not.

setCopyConstraintPattern(boolean) - Method in interface nxopen.assemblies.ComponentPatternBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setCopyCornerFlag(boolean) - Method in interface nxopen.routing.OffsetPath

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setCopyEventTrigger(ObjectSourceBuilder.CopyEventTriggerOption) - Method in interface nxopen.mechatronics.ObjectSourceBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setCopyInstance(boolean) - Method in interface nxopen.tooling.ElectrodeCopyBuilder

License requirements: None.

setCopyNonMasterPartsOption(LogicalObject, PartOperationCopyBuilder.CopyNonMasterParts) - Method in interface nxopen.pdm.PartOperationCopyBuilder

Deprecated.

Deprecated in NX11.0.0. Use NonMasterData.setNonMasterSaveAsOption(nxopen.pdm.LogicalObject, nxopen.pdm.NonMasterData.CopyNonMasterPartsOption) instead

setCopyOption(NodeProjectBuilder.NodeProjectTypes) - Method in interface nxopen.cae.NodeProjectBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setCopyOption(NodeReflectBuilder.CopyType) - Method in interface nxopen.cae.NodeReflectBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setCopyOption(NodeRotateBuilder.CopyType) - Method in interface nxopen.cae.NodeRotateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setCopyOption(NodeTranslateBuilder.CopyType) - Method in interface nxopen.cae.NodeTranslateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setCopyOriginal(boolean) - Method in interface nxopen.features.ExtendSheetBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setCopyOriginalOption(boolean) - Method in interface nxopen.features.TrimAndExtendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setCopyReplacementFeature(boolean) - Method in interface nxopen.features.ReplaceFeatureBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setCopyResolveGeometry(boolean) - Method in interface nxopen.features.CopyPasteBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setCopySection(boolean) - Method in interface nxopen.features.shipdesign.CopyObjectsBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setCopySection(boolean) - Method in interface nxopen.features.shipdesign.CopyPasteNewBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setCopyTargets(boolean) - Method in interface nxopen.features.BooleanBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setCopyThreads(boolean) - Method in interface nxopen.features.ExtractFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setCopyThreads(boolean) - Method in interface nxopen.features.GeomcopyBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setCopyThreads(boolean) - Method in interface nxopen.features.MirrorBodyBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setCopyThreads(boolean) - Method in interface nxopen.features.PatternGeometryBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setCopyThreads(boolean) - Method in interface nxopen.features.WaveInterfaceLinkerBuilder

License requirements: None.

setCopyThreads(boolean) - Method in interface nxopen.features.WaveLinkBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setCopyTools(boolean) - Method in interface nxopen.features.BooleanBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setCopyTransform(Vector3d, Matrix3x3) - Method in interface nxopen.routing.TransformPathBuilder

Sets the transform to use for the copy operation.

setCoreDirection(int) - Method in interface nxopen.tooling.DieDesignLowerBinderBuilder

License requirements: ug_die_design ("Die Design")
.

setCoreDrawDieOption(boolean) - Method in interface nxopen.tooling.DieDesDrawDieBuilder

License requirements: ug_die_design ("Die Design")
.

setCoreDrawPunchOption(boolean) - Method in interface nxopen.tooling.DieDesDrawPunchBuilder

License requirements: ug_die_design ("Die Design")
.

setCoreOrientation(ISurface) - Method in interface nxopen.die.HandlingCoreChildBuilder

Sets the core orientation of the handling core.

setCorePunch(boolean) - Method in interface nxopen.die.DrawDiePunchBuilder

Sets the core punch switch of the draw die punch casting, if true the punch will be cored, if false the punch will not be cored.

setCorner1(Point) - Method in interface nxopen.weld.WeldFillBuilder

License requirements: ugweld ("UG WELD")
.

setCorner2(Point) - Method in interface nxopen.weld.WeldFillBuilder

License requirements: ugweld ("UG WELD")
.

setCornerControlMethod(CornerControlBuilder.CornerControlMethods) - Method in interface nxopen.cam.CornerControlBuilder

License requirements: cam_base ("CAM BASE")
.

setCornerData(NXObject, NXObject[]) - Method in interface nxopen.cae.MappedMeshBuilder

Sets the corner data.

setCornerDataWithEdges(NXObject, int[], NXObject[]) - Method in interface nxopen.cae.MappedMeshBuilder

Sets the corner data using array of edges and int array consists of if user want start of an edge or an end of an edge.

setCornerFeedType(BoundaryTurnMemberCorner.FeedType) - Method in interface nxopen.cam.BoundaryTurnMemberCorner

License requirements: cam_base ("CAM BASE")
.

setCornerFindingOptions(CutParametersCornerFindingTypes) - Method in interface nxopen.cam.MillCutParameters

License requirements: cam_base ("CAM BASE")
.

setCorneringTableFile(String) - Method in interface nxopen.motion.TirePropertyBasicParameters

License requirements: mechanisms ("MECHANISMS")
.

setCornerLoops(boolean) - Method in interface nxopen.cam.PlanarOperationBuilder

License requirements: cam_base ("CAM BASE")
.

setCornerMethod(DivideCurveBuilder.CornerOption) - Method in interface nxopen.features.DivideCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setCornerNumber(int) - Method in interface nxopen.features.DivideCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setCornerPoint(Point) - Method in interface nxopen.features.shipdesign.CornerCutBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setCornerPoint(Point) - Method in interface nxopen.features.shipdesign.CornerCutListItemBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setCornerPoint(Point) - Method in interface nxopen.features.shipdesign.WeldCut2Builder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setCornerPoints(Point3d, Point3d, Point3d, Point3d) - Method in interface nxopen.DatumPlane

Sets the corner points of the datum plane
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setCornerPoints(Point3d, Point3d, Point3d, Point3d) - Method in interface nxopen.display.BoundedGridBuilder

Sets corner points of the grid
License requirements: None.

setCornerPoints(Point3d, Point3d, Point3d, Point3d) - Method in interface nxopen.display.ImageBaseBuilder

Set the image corner points.

setCornerPoints(Point3d, Point3d, Point3d, Point3d) - Method in interface nxopen.features.DatumPlaneBuilder

Sets corner points to builder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setCornerPoints(Point3d[]) - Method in interface nxopen.features.ResizePlaneBuilder

Sets the four corner points for resizing a datum plane
License requirements: solid_modeling ("SOLIDS MODELING")
.

setCornerRadius(double) - Method in interface nxopen.cam.LaserCutoutDefinition

License requirements: cam_base ("CAM BASE")
.

setCornerRadius(double) - Method in interface nxopen.cam.WireGuide

License requirements: cam_base ("CAM BASE")
.

setCornerRadius(String) - Method in interface nxopen.features.sheetmetal.DrawnCutoutBuilder

Deprecated.

Deprecated in NX10.0.0. Use Expression.setRightHandSide(java.lang.String) on the Expression object returned from DrawnCutoutBuilder.cornerRadius() instead.

setCornerReliefType(BendOptions.CornerReliefTypeOptions) - Method in interface nxopen.features.sheetmetal.BendOptions

Sets the corner relief type.

setCornerReliefType(EditCornerBuilder.CornerReliefTypeOptions) - Method in interface nxopen.features.sheetmetal.EditCornerBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setCornerTreatmentOriginType(MiterOptions.CornerTreatmentOriginTypeOptions) - Method in interface nxopen.features.sheetmetal.MiterOptions

License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setCornerType(TurnGrooveCornerControl.CornerTypes) - Method in interface nxopen.cam.TurnGrooveCornerControl

License requirements: cam_base ("CAM BASE")
.

setCornerType(CornerDesignBuilder.CornerTypeOpt) - Method in interface nxopen.tooling.CornerDesignBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setCornerZoneModification(double) - Method in interface nxopen.drawings.SheetZoneSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setCorrelationType(CSDExcitation.CorrelationType) - Method in interface nxopen.cae.responsesimulation.CSDExcitationBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setCorrelationValue(double) - Method in interface nxopen.cae.responsesimulation.CSDExcitationBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setCorrelMethod(ModelUpdateCorrelMethodBuilder.Method) - Method in interface nxopen.cae.ModelUpdateCorrelMethodBuilder

License requirements: nx_correl_update ("FE Model Update")
.

setCosimSampleTime(double) - Method in interface nxopen.motion.RecurdynSolverProperty

Deprecated.

Deprecated in NX8.5.0. Obtion the expression using RecurdynSolverProperty.cosimSampleTimeExpression() to query or edit it.

setCosimSimModel(String) - Method in interface nxopen.motion.RecurdynSolverProperty

License requirements: mechanisms ("MECHANISMS")
.

setCoSimulation(boolean) - Method in interface nxopen.mechatronics.PreferencesBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setCostOfStep(Tag, double) - Method in interface nxopen.uf.UFAssem

Refer to UF_ASSEM_set_cost_of_step for documentation.

setCoulombFrictionOption(BodyContactAdams.CoulombFriction) - Method in interface nxopen.motion.BodyContactAdams

License requirements: mechanisms ("MECHANISMS")
.

setCoulombFrictionOption(BodyContactLms.CoulombFriction) - Method in interface nxopen.motion.BodyContactLms

License requirements: mechanisms ("MECHANISMS")
.

setCoulombFrictionOption(BodyContactRecurdyn.CoulombFriction) - Method in interface nxopen.motion.BodyContactRecurdyn

License requirements: mechanisms ("MECHANISMS")
.

setCount(int) - Method in interface nxopen.assemblies.DesignElementBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setCounterboreDepth(String) - Method in interface nxopen.features.HoleFeatureBuilder

Sets the depth of the counterbore for a hole.

setCounterboreDepthType(SearchModelViewBuilder.ValueComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder

License requirements: None.

setCounterboreDepthValue(double) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder

License requirements: None.

setCounterboredHoles(boolean) - Method in interface nxopen.annotations.HoleTableSettingsHoleFiltersBuilder

License requirements: drafting ("DRAFTING")
.

setCounterBoreDiameter(double) - Method in interface nxopen.die.HoleChildBuilder

Sets the counter bore diameter of the die hole.

setCounterBoreDiameter(double) - Method in interface nxopen.die.HoleParentBuilder

Sets the counter bore diameter of die holes.

setCounterboreDiameter(String) - Method in interface nxopen.features.HoleFeatureBuilder

Sets the diameter of the counterbore for a hole.

setCounterboreDiameter(NXObject, double) - Method in interface nxopen.tooling.ReusablePocketBuilder

Sets counterbore diameter for hole series.

setCounterboreDiameterType(SearchModelViewBuilder.ValueComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder

License requirements: None.

setCounterboreDiameterValue(double) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder

License requirements: None.

setCounterboreHole(Point3d, boolean, ISurface, String, String, String) - Method in interface nxopen.features.HoleFeatureBuilder

Sets parameters for counterbore hole
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.

setCountersinkAngle(double) - Method in interface nxopen.annotations.HoleTableSettingsHoleFiltersBuilder

License requirements: drafting ("DRAFTING")
.

setCountersinkAngle(String) - Method in interface nxopen.features.HoleFeatureBuilder

Sets the angle of the countersink for a hole.

setCountersinkAngleType(SearchModelViewBuilder.ValueComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder

License requirements: None.

setCountersinkAngleValue(double) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder

License requirements: None.

setCountersinkDiameter(String) - Method in interface nxopen.features.HoleFeatureBuilder

Sets the diameter of the countersink for a hole.

setCountersinkDiameterType(SearchModelViewBuilder.ValueComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder

License requirements: None.

setCountersinkDiameterValue(double) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder

License requirements: None.

setCountersinkHole(Point3d, boolean, ISurface, String, String, String) - Method in interface nxopen.features.HoleFeatureBuilder

Sets parameters for countersink hole
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.

setCounterSpindleFace(Face) - Method in interface nxopen.cam.ConvertFromMCDBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setCountersunkDiameter(NXObject, double) - Method in interface nxopen.tooling.ReusablePocketBuilder

Sets countersunk diameter for hole series.

setCountersunkHoles(boolean) - Method in interface nxopen.annotations.HoleTableSettingsHoleFiltersBuilder

License requirements: drafting ("DRAFTING")
.

setCountOfFaces(int) - Method in interface nxopen.cam.Splitter

License requirements: cam_base ("CAM BASE")
.

setCoupledSolutionOption(SolidPropertyCheckBuilder.CoupledSolutionOutput) - Method in interface nxopen.cae.SolidPropertyCheckBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setCoupleLimit(boolean) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setCoutoutType(PenetrationRequest.CoutoutType) - Method in interface nxopen.features.shipdesign.PenetrationAssociationBuilder

License requirements: nx_penetration_mgmt ("Penetration Management")
.

setCoutoutType(PenetrationRequest.CoutoutType) - Method in interface nxopen.features.shipdesign.PenetrationCutoutBuilder

License requirements: nx_penetration_mgmt ("Penetration Management")
.

setCoutoutType(PenetrationRequest.CoutoutType) - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder

License requirements: nx_penetration_mgmt ("Penetration Management")
.

setCOutput(boolean) - Method in interface nxopen.cam.AlongMachineAxisMoveBuilder

License requirements: None.

setCoveredStocks(Stock[]) - Method in interface nxopen.routing.OverstockApplication

Sets the Stock and OverstockApplication that this OverstockApplication covers.

setCoveredStocks(Stock[]) - Method in interface nxopen.routing.OverstockBuilder

Sets the stocks to be covered by the overstock.

setCoverThickness(double) - Method in interface nxopen.routing.electrical.CableStockDefinition

Sets the thickness of the cable's covering.

setCreateAngleDimension(boolean) - Method in interface nxopen.SketchChamferBuilder

License requirements: drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setCreateApexCurve(boolean) - Method in interface nxopen.features.SectionSurfaceBuilder

Deprecated.

Deprecated in NX9.0.0. Use SectionSurfaceBuilderEx instead.

setCreateApexCurve(boolean) - Method in interface nxopen.features.SectionSurfaceBuilderEx

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setCreateAsPartingSurface(boolean) - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder

License requirements: None.

setCreateBasins(boolean) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setCreateBlankOption(BlankGeneratorBuilder.CreateBlankType) - Method in interface nxopen.tooling.BlankGeneratorBuilder

License requirements: None.

setCreateBorders(boolean) - Method in interface nxopen.drawings.BordersAndZonesBuilder

Deprecated.

Deprecated in NX10.0.0. Use SheetBorderSettingsBuilder.createBorders() instead.

setCreateBorders(boolean) - Method in interface nxopen.drawings.SheetBorderSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setCreateBottomBubblesToggle(boolean) - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setCreateBreaks(boolean) - Method in interface nxopen.annotations.BreakSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setCreateConcept(boolean) - Method in interface nxopen.features.shipdesign.ConceptFromSpreadsheetBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setCreateContinuitySymbolOnSectionStiffener(boolean) - Method in interface nxopen.features.shipdesign.DrawingAnnotationBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setCreateCopy(boolean) - Method in interface nxopen.features.MatchEdgeBuilder

License requirements: features_modeling ("FEATURES MODELING")
.

setCreateCopy(boolean) - Method in interface nxopen.features.RefitFaceBuilder

License requirements: features_modeling ("FEATURES MODELING")
.

setCreateCopy(boolean) - Method in interface nxopen.layout2d.ReparentComponentBuilder

License requirements: None.

setCreateCSYS(boolean) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setCreateCurveOption(boolean) - Method in interface nxopen.SketchEvaluator

License requirements: solid_modeling ("SOLIDS MODELING")
.

setCreateCurves(boolean) - Method in interface nxopen.features.SilhouetteFlangeBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setCreateCurvesForGouges(boolean) - Method in interface nxopen.cam.CutDepthChecker

License requirements: cam_base ("CAM BASE")
.

setCreateDamper(boolean) - Method in interface nxopen.motion.SpringBuilder

License requirements: None.

setCreatedApplication(WeldJointBuilder.Application) - Method in interface nxopen.weld.WeldJointBuilder

License requirements: structure_weld ("STRUCTURE WELD")
.

setCreateDataSetToggle(boolean) - Method in interface nxopen.features.shipdesign.ReadDataSetBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setCreatedByInsert(boolean) - Method in interface nxopen.tooling.BlankGeneratorBuilder

License requirements: None.

setCreatedHoleManufacturingNote(NXObject) - Method in interface nxopen.tooling.HoleManufacturingNoteBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setCreateDiagnosticGroups(boolean) - Method in interface nxopen.cae.DurabilityEventSolverBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setCreateDiagnosticGroups(boolean) - Method in interface nxopen.cae.DurabilitySolverBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setCreateDimension(boolean) - Method in interface nxopen.SketchOffsetBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setCreateDirectionVector(boolean) - Method in interface nxopen.weld.DatumCommonBuilder

License requirements: ugweld ("UG WELD")
.

setCreateDistance1Dimension(boolean) - Method in interface nxopen.SketchChamferBuilder

License requirements: drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setCreateDistance2Dimension(boolean) - Method in interface nxopen.SketchChamferBuilder

License requirements: drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setCreatedOrdinateOrigin(NXObject) - Method in interface nxopen.tooling.AutoDimensionBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setCreatedOrdinateOrigin(TaggedObject) - Method in interface nxopen.tooling.HoleReportBuilder

License requirements: None.

setCreateDraftingComponent(boolean) - Method in interface nxopen.drawings.GeneralWorkFlowBuilder

License requirements: drafting ("DRAFTING")
.

setCreateEditMethod(ReliefDesignBuilder.Method) - Method in interface nxopen.tooling.ReliefDesignBuilder

License requirements: None.

setCreateEndToStart(boolean) - Method in interface nxopen.weld.WeldBeadPathBuilder

License requirements: ugweld ("UG WELD")
.

setCreateEntryPoint(boolean) - Method in interface nxopen.cam.InspectionPathBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setCreateExitPoint(boolean) - Method in interface nxopen.cam.InspectionPathBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setCreateExtrudeSweptPreview(boolean) - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder

License requirements: None.

setCreateFacets(boolean) - Method in interface nxopen.die.SpringbackCompensationBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR nx_freeform_2 ("advanced freeform modeling")
.

setCreateFieldOption(boolean) - Method in interface nxopen.cae.PostGraphBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setCreateFittings(boolean) - Method in interface nxopen.tooling.SpecifyCircuitBuilder

License requirements: ug_mold_design ("UG MOLD")
.

setCreateFloor(boolean) - Method in interface nxopen.die.HeelpostBuilder

License requirements: ug_die_design ("Die Design")
.

setCreateFolded(boolean) - Method in interface nxopen.drawings.SectionViewBuilder

License requirements: drafting ("DRAFTING")
.

setCreateGaps(boolean) - Method in interface nxopen.drawings.ViewStyleTraceLinesBuilder

License requirements: drafting ("DRAFTING")
.

setCreateGapsStatus(boolean) - Method in interface nxopen.drawings.TraceLinesViewStyle

Sets the status of create gaps
License requirements: drafting ("DRAFTING")
.

setCreateGapsStatus(boolean) - Method in interface nxopen.preferences.TraceLinesViewPreferences

Sets the status of create gaps
License requirements: drafting ("DRAFTING")
.

setCreateGeometry(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setCreateGeometry(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setCreateGeometry(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactFrontHeaderDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setCreateGeometry(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setCreateGeometry(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setCreateGeometry(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactRearHeaderDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setCreateGeometry(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setCreateGeometry(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setCreateGeometry(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setCreateGroups(boolean) - Method in interface nxopen.cae.RemoveRibsBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setCreateHeadImpactZones(boolean) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setCreateHolePatch(boolean) - Method in interface nxopen.features.PatchBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setCreateImpactGrid(boolean) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setCreateIndependent(int) - Method in interface nxopen.preferences.DetailViewPreferences

License requirements: drafting ("DRAFTING")
.

setCreateIndependentDetailView(boolean) - Method in interface nxopen.drawings.ViewStyleDetailBuilder

License requirements: drafting ("DRAFTING")
.

setCreateInferConstraintsSetting(Sketch.CreateInferConstraintSetting) - Method in interface nxopen.Sketch

Sets the toggle that controls the creation of infer constraints in sketch
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setCreateInferredConstraints(boolean) - Method in interface nxopen.preferences.SessionSketch

Sets the create inferred constraints
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setCreateInferredConstraints(boolean) - Method in interface nxopen.preferences.SketchPreferences

Sets the option to control if inferred constraints are automatically created when curves and points are created in the sketch.

setCreateIntermediateDatumCsys(boolean) - Method in interface nxopen.SketchInPlaceBuilder

Deprecated.

Deprecated in NX11.0.0. None

setCreateInterpartLink(boolean) - Method in interface nxopen.blockstyler.BodyCollector

License requirements: None.

setCreateInterpartLink(boolean) - Method in interface nxopen.blockstyler.CurveCollector

License requirements: None.

setCreateInterpartLink(boolean) - Method in interface nxopen.blockstyler.FaceCollector

License requirements: None.

setCreateInterpartLink(boolean) - Method in interface nxopen.blockstyler.SectionBuilder

License requirements: None.

setCreateInterpartLink(boolean) - Method in interface nxopen.blockstyler.SelectObject

License requirements: None.

setCreateInterpartLink(boolean) - Method in interface nxopen.blockstyler.SpecifyCSYS

License requirements: None.

setCreateInterpartLink(boolean) - Method in interface nxopen.blockstyler.SpecifyPlane

License requirements: None.

setCreateInterpartLink(boolean) - Method in interface nxopen.blockstyler.SpecifyPoint

License requirements: None.

setCreateInterpartLink(boolean) - Method in interface nxopen.blockstyler.SpecifyVector

License requirements: None.

setCreateInterpartLink(boolean) - Method in interface nxopen.blockstyler.SuperPoint

License requirements: None.

setCreateInterpartLink(boolean) - Method in interface nxopen.blockstyler.SuperSection

License requirements: None.

setCreateIntersectionGeometry(boolean) - Method in interface nxopen.features.vehicledesign.AllAroundVisionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setCreateLastStaggered(boolean) - Method in interface nxopen.geometricutilities.CircularPattern

License requirements: None.

setCreateLastStaggered(boolean) - Method in interface nxopen.geometricutilities.RectangularPattern

License requirements: None.

setCreateLeftBubblesToggle(boolean) - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setCreateLegImpact(boolean) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setCreateLocation(boolean) - Method in interface nxopen.tooling.ReliefDesignBuilder

License requirements: None.

setCreateMethod(WeldJointBuilder.Types) - Method in interface nxopen.weld.WeldJointBuilder

License requirements: structure_weld ("STRUCTURE WELD")
.

setCreateNamedGroup(boolean) - Method in interface nxopen.PartImporter

Sets the Create Named Group flag.

setCreateNcapCircles(boolean) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setCreateNcapSheets(boolean) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setCreateNewCopy(boolean) - Method in interface nxopen.features.PoleSmoothingBuilder

Sets the indicator for creating a new copy
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setCreateNewCopy(boolean) - Method in interface nxopen.features.SnipSurfaceBuilder

Sets the indicator for creating a new copy
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setCreateNewPointsOnSubdivide(RoutingPath.AddPointsToSpline) - Method in interface nxopen.preferences.RoutingPath

License requirements: routing_base ("Routing Basic")
.

setCreateNewRowAsLocked(boolean) - Method in interface nxopen.annotations.PartsListBuilder

License requirements: None.

setCreateOffsetData(boolean) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setCreateOpeningFillLines(boolean) - Method in interface nxopen.features.shipdesign.DrawingAnnotationBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setCreateOption(boolean) - Method in interface nxopen.cae.MeshPointMultipleOnCurveBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setCreateOverlayDataWithSnapshotData(boolean) - Method in interface nxopen.drawings.TrackDrawingChangesGeneralBuilder

License requirements: drafting ("DRAFTING")
.

setCreatePartingLinesToggle(boolean) - Method in interface nxopen.tooling.MWDefineRegionsBuilder

License requirements: None.

setCreatePathsEnum(InspectionLinkPmiBuilder.CreatePathsOptions) - Method in interface nxopen.cam.InspectionLinkPmiBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setCreatePlane(boolean) - Method in interface nxopen.weld.DatumCommonBuilder

License requirements: ugweld ("UG WELD")
.

setCreatePocket(boolean) - Method in interface nxopen.tooling.FastenerAssy

Sets the flag to indicate whether to create pocket when adding the fastener
License requirements: None.

setCreatePoint(boolean) - Method in interface nxopen.weld.DatumCommonBuilder

License requirements: ugweld ("UG WELD")
.

setCreateQueryResultsView(boolean) - Method in interface nxopen.annotations.QueryPmiBuilder

Sets the create query results view
License requirements: None.

setCreateReferenceLines(boolean) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setCreateReferencePattern(boolean) - Method in interface nxopen.features.PatternFeatureBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setCreateRegionsOption(SurfaceRegions.CreateRegionsTypes) - Method in interface nxopen.cam.SurfaceRegions

License requirements: cam_base ("CAM BASE")
.

setCreateRegionsToggle(boolean) - Method in interface nxopen.tooling.MWDefineRegionsBuilder

License requirements: None.

setCreateRightBubblesToggle(boolean) - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setCreateScantling(boolean) - Method in interface nxopen.features.shipdesign.DrawingAnnotationBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setCreateScantlingTable(boolean) - Method in interface nxopen.features.shipdesign.DrawingAnnotationBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setCreateScrap(boolean) - Method in interface nxopen.die.PierceTaskBuilder

Sets the create scrap setting of the pierce task.

setCreateScrap(boolean) - Method in interface nxopen.die.TrimTaskBuilder

Sets the create scrap setting of the trim task.

setCreateScrap(boolean) - Method in interface nxopen.tooling.DieEngTrimTaskBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setCreateSectionLine(SectionLineStyleBuilder.CreateSectionLineType) - Method in interface nxopen.drawings.SectionLineStyleBuilder

Deprecated.

Deprecated in NX10.0.0. Use ViewSectionLineBuilder.setShowSectionLine(nxopen.drawings.ViewSectionLineBuilder.ShowSectionLineType) instead.

setCreateSeparateParts(boolean) - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setCreateSingle2DComponentDefinition(boolean) - Method in interface nxopen.layout2d.CreateComponentFrom3DSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setCreateSingleFeatures(boolean) - Method in interface nxopen.weld.JointmarkBuilder

License requirements: ugweld ("UG WELD")
.

setCreateSketch(boolean) - Method in interface nxopen.features.OptimizeCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setCreateSketches(boolean) - Method in interface nxopen.drawings.ViewCopyTo3dBuilder

Deprecated.

Deprecated in NX8.0.0. This method is no longer relevant and calls to this can be safely removed.

setCreateSkipWelds(boolean) - Method in interface nxopen.weld.WeldGrooveBuilder

License requirements: ugweld ("UG WELD")
.

setCreateSlopeConstraints(RoutingPath.CreateSlopeConstraints) - Method in interface nxopen.preferences.RoutingPath

License requirements: routing_base ("Routing Basic")
.

setCreateSmartRcps(RoutingPath.CreateSmartRcps) - Method in interface nxopen.preferences.RoutingPath

License requirements: routing_base ("Routing Basic")
.

setCreateSolidSetting(boolean) - Method in interface nxopen.tooling.PocketBuilder

License requirements: None.

setCreateSolution(boolean) - Method in interface nxopen.cae.ResultsManipulationBuilder

Specifies whether to create an imported solution
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setCreateSpaceReservationEnabled(boolean) - Method in interface nxopen.routing.DuctSizeCalculatorBuilder

License requirements: routing_hvac ("Routing HVAC")
.

setCreateSpacingExp(boolean) - Method in interface nxopen.SketchPatternBuilder

License requirements: None.

setCreateSplineTangency(RoutingPath.CreateTangency) - Method in interface nxopen.preferences.RoutingPath

License requirements: routing_base ("Routing Basic")
.

setCreateStiffenerSectionSymbol(boolean) - Method in interface nxopen.features.shipdesign.DrawingAnnotationBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setCreateStructureID(boolean) - Method in interface nxopen.features.shipdesign.DrawingAnnotationBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setCreateSupportCasting(boolean) - Method in interface nxopen.die.CastReliefBuilder

License requirements: ug_die_design ("Die Design")
.

setCreateTangencyFlag(boolean) - Method in interface nxopen.routing.SplinePathBuilder

Sets whether or not additional the newly created spline will be made tangent to connecting splines.

setCreateTerminalsOption(RoutingElectrical.CreateTerminalsType) - Method in interface nxopen.preferences.RoutingElectrical

Sets the create terminals option.

setCreateTireEnvelopeFeature(boolean) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setCreateTopBubblesToggle(boolean) - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setCreateTraceLines(boolean) - Method in interface nxopen.features.MoveObjectBuilder

License requirements: None.

setCreateTrimmingMarks(boolean) - Method in interface nxopen.drawings.BordersAndZonesBuilder

Deprecated.

Deprecated in NX10.0.0. Use SheetBorderSettingsBuilder.createTrimmingMarks() instead.

setCreateTrimmingMarks(boolean) - Method in interface nxopen.drawings.SheetBorderSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setCreateTwoGroups(boolean) - Method in interface nxopen.cae.GroupByBoundaryBuilder

License requirements: None.

setCreateUntrimmedMargins(boolean) - Method in interface nxopen.drawings.SheetMarginSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setCreateViewIndependent(boolean) - Method in interface nxopen.annotations.PmiPreferences

Sets the flag indicating whether the PMI would be created view independent
License requirements: None.

setCreateWithPad(boolean) - Method in interface nxopen.die.HoleChildBuilder

Sets the create with pad switch of the die hole, if true a pad will be created around the hole, if false the pad will not be created.

setCreateWithPad(boolean) - Method in interface nxopen.die.HoleParentBuilder

Sets the create with pad switch of die holes, if true a pad will be created around the holes, if false the pad will not be created.

setCreateWithPad(boolean) - Method in interface nxopen.die.KeywayBuilder

License requirements: ug_die_design ("Die Design")
.

setCreateWrapAroundDistanceLines(boolean) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setCreateXDimensions(boolean) - Method in interface nxopen.tooling.AutoDimensionBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setCreateYDimensions(boolean) - Method in interface nxopen.tooling.AutoDimensionBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setCreateZoneLabels(boolean) - Method in interface nxopen.drawings.BordersAndZonesBuilder

Deprecated.

Deprecated in NX10.0.0. Use SheetZoneSettingsBuilder.createZoneLabels() instead.

setCreateZoneLabels(boolean) - Method in interface nxopen.drawings.SheetZoneSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setCreateZoneMarking(boolean) - Method in interface nxopen.drawings.BordersAndZonesBuilder

Deprecated.

Deprecated in NX10.0.0. Use SheetZoneSettingsBuilder.createZoneMarkings() instead.

setCreateZoneMarkings(boolean) - Method in interface nxopen.drawings.SheetZoneSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setCreateZones(boolean) - Method in interface nxopen.drawings.SheetZoneSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setCreationDirection(DatumCommonBuilder.CreationDirectionMethods) - Method in interface nxopen.weld.DatumCommonBuilder

License requirements: ugweld ("UG WELD")
.

setCreationDirection(WeldCreationDirection) - Method in interface nxopen.weld.WeldPointBuilder

Sets the creation direction type.

setCreationMethod(SpunOutlineGeom.CreationTypes) - Method in interface nxopen.cam.SpunOutlineGeom

License requirements: cam_base ("CAM BASE")
.

setCreationType(Mesh3dHexBuilder.Type) - Method in interface nxopen.cae.Mesh3dHexBuilder

Sets the type of hex mesh
License requirements: nx_masterfem ("Finite Element Modeling")
.

setCreColor(int, int, int, int) - Method in interface nxopen.uf.UFObj

Refer to UF_OBJ_set_cre_color for documentation.

setCreColorToDef(int, int, int) - Method in interface nxopen.uf.UFObj

Refer to UF_OBJ_set_cre_color_to_def for documentation.

setCreLineFont(int, int, int, int) - Method in interface nxopen.uf.UFObj

Refer to UF_OBJ_set_cre_line_font for documentation.

setCreLineFontToDef(int, int, int) - Method in interface nxopen.uf.UFObj

Refer to UF_OBJ_set_cre_line_font_to_def for documentation.

setCrestLine(NXObject) - Method in interface nxopen.cam.ThreadTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setCrestLineDirection(boolean) - Method in interface nxopen.cam.ThreadTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setCreWidth(int, int, int, int) - Method in interface nxopen.uf.UFObj

Refer to UF_OBJ_set_cre_width for documentation.

setCreWidthToDef(int, int, int) - Method in interface nxopen.uf.UFObj

Refer to UF_OBJ_set_cre_width_to_def for documentation.

setCriteria(String[], String[]) - Method in interface nxopen.assemblies.AttributeSearchTermBuilder

Set the entry titles and values that are used to populate the saved query.

setCriteria(String, String[], String[]) - Method in interface nxopen.pdm.FindCriteria

This API sets the search query name, entries, and values.

setCriteriaValue(TestValueTypes.CriteriaType, double, Unit) - Method in interface nxopen.cae.modelcheck.ITestValue

Sets the criteria value.

setCriteriaValue(TestValueTypes.CriteriaType, String, Unit) - Method in interface nxopen.cae.modelcheck.ITestValue

Sets the criteria value.

setCriticalPlaneOption(DurabilityStrainGageAnalyzerBuilder.CriticalPlaneOptionEnum) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setCrossCurveCount(int) - Method in interface nxopen.cam.DPMItpBuilder

License requirements: cam_base ("CAM BASE")
.

setCrossCurveNormalToFlowCount(int) - Method in interface nxopen.cam.DPMItpBuilder

License requirements: cam_base ("CAM BASE")
.

setCrossCurveNormalToFlowCurve(TaggedObject[]) - Method in interface nxopen.cam.DPMItpBuilder

Sets the flow curve used in generation of cross curves normal to flow.

setCrossCurves(Curve[]) - Method in interface nxopen.routing.CrossSection

Sets the curves that define the profile for the CrossSection object.

setCrossCurvesMethod(DPMItpBuilder.CrossCurvesMethodOption) - Method in interface nxopen.cam.DPMItpBuilder

License requirements: cam_base ("CAM BASE")
.

setCrossDegree(int) - Method in interface nxopen.SurfaceRebuildData

License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

setCrossHatch(boolean) - Method in interface nxopen.drawings.SectionViewStyle

Sets the status of cross hatch.

setCrosshatch(boolean) - Method in interface nxopen.drawings.ViewStyleSectionBuilder

License requirements: drafting ("DRAFTING")
.

setCrossHatch(boolean) - Method in interface nxopen.preferences.SectionViewPreferences

Sets the status of cross hatch.

setCrosshatchAdjacencyTolarance(double) - Method in interface nxopen.drawings.SectionViewStyle

Sets the value of crosshatch adjacency tolarance.

setCrosshatchAdjacencyTolarance(double) - Method in interface nxopen.preferences.SectionViewPreferences

Sets the value of crosshatch adjacency tolarance.

setCrosshatchAdjacencyTolerance(double) - Method in interface nxopen.annotations.PmiPreferences

License requirements: None.

setCrosshatchAreaFillsCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use TrackDrawingChangesReportFilterBuilder.setReportFilterStatus(nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter, boolean) instead.

setCrosshatchColor(NXColor) - Method in interface nxopen.annotations.RegionBuilder

License requirements: geometric_tol ("GDT")
.

setCrosshatchFile(String) - Method in interface nxopen.annotations.HatchBuilder

Deprecated.

Deprecated in NX7.5.0. Use HatchFillSettingsBuilder instead.

setCrosshatchFile(String) - Method in interface nxopen.annotations.HatchFillSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setCrosshatching(boolean) - Method in interface nxopen.CGMImporter

Sets the crosshatching flag, true if crosshatching should be done
License requirements: None.

setCrosshatchInheritedSectionViews(boolean) - Method in interface nxopen.drawings.ViewCreationWizardBuilder

License requirements: drafting ("DRAFTING")
.

setCrossHatchMappingFile(String) - Method in interface nxopen.DxfdwgCreator

License requirements: None.

setCrossHatchMappingFile(String) - Method in interface nxopen.DxfdwgImporter

License requirements: None.

setCrosshatchPattern(RegionBuilder.CrosshatchPatterns) - Method in interface nxopen.annotations.RegionBuilder

Deprecated.

Deprecated in NX8.5.0. Use the sublock of RegionBuilder.crosshatchSettings() called Pattern instead.

setCrosshatchPmiLightweightSectionView(boolean) - Method in interface nxopen.preferences.InheritPmiPreferences

License requirements: drafting ("DRAFTING")
.

setCrosshatchPmiLwsv(boolean) - Method in interface nxopen.drawings.InheritPmiViewStyle

Controls whether the cut faces of an inherited PMI Lightweight section view are cross-hatched or not.

setCrosshatchPmiLwsv(boolean) - Method in interface nxopen.drawings.ViewStyleInheritPmiBuilder

License requirements: drafting ("DRAFTING")
.

setCrossHoleCircle(NXObject) - Method in interface nxopen.cam.CenterlineDrillTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setCrossingLevel(double) - Method in interface nxopen.cae.responsesimulation.LcrResultsEvaluationSettingBuilder

Deprecated.

Deprecated in NX8.5.0. Use LcrResultsEvaluationSettingBuilder.crossingLevelExpression() and #setCrossingLevelExpression instead.

setCrossLinesRatio(double) - Method in interface nxopen.tooling.ElectrodeBlankBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setCrossMaxDegree(int) - Method in interface nxopen.SurfaceRebuildData

License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

setCrossMaxSegments(int) - Method in interface nxopen.SurfaceRebuildData

License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

setCrossover(NXColor) - Method in interface nxopen.cam.PathDisplayColors

License requirements: cam_base ("CAM BASE")
.

setCrossRebuildType(SurfaceRebuildData.Type) - Method in interface nxopen.SurfaceRebuildData

License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

setCrossSection(CrossSection) - Method in interface nxopen.routing.Stock

Sets the CrossSection .

setCrossSectionCurveOption(GapFlushnessBuilder.SectionCurveOptions) - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setCrossSectionDirection(Direction) - Method in interface nxopen.mechanicalrouting.StockBuilder

Sets the orientation vector. cross section direction of the stock.

setCrossSections(CrossSection[]) - Method in interface nxopen.routing.StockData

Sets the list of CrossSection objects associated with this StockData .

setCrossSectionType(FaceBlendBuilder.CrossSectionOption) - Method in interface nxopen.features.FaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setCrossSectionType(BeadBuilder.CrossSectionTypeOptions) - Method in interface nxopen.features.sheetmetal.BeadBuilder

Sets the bead profile type .

setCrossSectionType(ElectricalStockDefinition.SectionType) - Method in interface nxopen.routing.electrical.ElectricalStockDefinition

Sets the cross section type of stock
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setCrossSelection(boolean) - Method in interface nxopen.blockstyler.Node

License requirements: None.

setCsinkDiameter(double) - Method in interface nxopen.cam.Cycle

License requirements: cam_base ("CAM BASE")
.

setCsMode(TurnAvoidancePathPointsBuilder.CsTypes) - Method in interface nxopen.cam.TurnAvoidancePathPointsBuilder

License requirements: cam_base ("CAM BASE")
.

setCsOption(AssignNodalCSBuilder.Cs) - Method in interface nxopen.cae.AssignNodalCSBuilder

License requirements: None.

setCsvFileName(String) - Method in interface nxopen.weld.ExportWeldBuilder

License requirements: ugweld ("UG WELD")
.

setCsys(NXObject) - Method in interface nxopen.cae.DependentMeshBuilder

The cys
License requirements: nx_masterfem ("Finite Element Modeling")
.

setCsys(CoordinateSystem) - Method in interface nxopen.cae.ElementTranslateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setCsys(CoordinateSystem) - Method in interface nxopen.cae.Mesh0dBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setCsys(CoordinateSystem) - Method in interface nxopen.cae.NodeCreateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setCsys(boolean) - Method in interface nxopen.cae.NodeElementInfoBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setCsys(CoordinateSystem) - Method in interface nxopen.cae.NodeModifyLocationBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setCsys(CoordinateSystem) - Method in interface nxopen.cae.NodeTranslateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setCsys(Matrix3x3) - Method in interface nxopen.cae.PostGraphAlongPathBuilder

Set csys for extracting data for x axis
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setCsys(SmartObject) - Method in interface nxopen.cae.responsesimulation.StrainGageBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setCsys(Result.CoordinateSystem) - Method in interface nxopen.cae.ResultVariable

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setCsys(CartesianCoordinateSystem) - Method in interface nxopen.cam.GeometryGroup

License requirements: cam_base ("CAM BASE")
.

setCsys(CartesianCoordinateSystem) - Method in interface nxopen.cam.LaserControlPoint

License requirements: cam_base ("CAM BASE")
.

setCsys(CartesianCoordinateSystem) - Method in interface nxopen.cam.LaserHeadOrientation

License requirements: cam_base ("CAM BASE")
.

setCsys(CartesianCoordinateSystem) - Method in interface nxopen.die.PressureSystemChildBuilder

Sets the csys of the pressure system.

setCsys(CartesianCoordinateSystem) - Method in interface nxopen.features.DatumCsysBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setCsys(CoordinateSystem) - Method in interface nxopen.features.ScaleBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setCSys(SectionInertiaAnalysisBuilder.CoordSys) - Method in interface nxopen.features.SectionInertiaAnalysisBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setCsys(CoordinateSystem) - Method in interface nxopen.geometricutilities.OrientXpressBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setCsys(CoordinateSystem) - Method in interface nxopen.IgesCreator

License requirements: None.

setCsys(CoordinateSystem) - Method in interface nxopen.motion.BushingDefine

License requirements: mechanisms ("MECHANISMS")
.

setCsys(CoordinateSystem) - Method in interface nxopen.motion.LinkAttachmentData

License requirements: None.

setCsys(CoordinateSystem) - Method in interface nxopen.motion.MarkerBuilder

License requirements: mechanisms ("MECHANISMS")
.

setCsys(CoordinateSystem) - Method in interface nxopen.motion.RoadBuilder

License requirements: mechanisms ("MECHANISMS")
.

setCsys(VobjectCsysType) - Method in interface nxopen.motion.VObject

License requirements: mechanisms ("MECHANISMS")
.

setCsys(boolean) - Method in interface nxopen.ObjectTypeSelector

License requirements: None.

setCsys(CoordinateSystem) - Method in interface nxopen.PasteSpecialBuilder

License requirements: None.

setCsys(CartesianCoordinateSystem) - Method in interface nxopen.sim.KinematicJunctionBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder") OR resource_manager_nx ("Teamcenter Resource Manager")
.

setCsysAssemblyState(boolean) - Method in interface nxopen.weld.WeldPointBuilder

Sets the assy coordinate system state
License requirements: ugweld ("UG WELD")
.

setCsysAssociative(boolean) - Method in interface nxopen.features.ToolingBoxBuilder

License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard") OR studio_free_form ("STUDIO FREE FORM") OR features_modeling ("FEATURES MODELING") OR solid_modeling ("SOLIDS MODELING")
.

setCsysAxis(PostGraphAlongPathBuilder.CoordinateSysAxis) - Method in interface nxopen.cae.PostGraphAlongPathBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setCsysFixedSizeOnScreen(boolean) - Method in interface nxopen.preferences.SessionVisualizationScreen

License requirements: None.

setCsysInformationListing(Preferences.CsysInformationListingTypes) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setCsysMirrorOption(GeomcopyBuilder.CsysMirrorOptions) - Method in interface nxopen.features.GeomcopyBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setCsysMirrorOption(MirrorBuilder.CsysMirrorOptions) - Method in interface nxopen.features.MirrorBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setCsysOption(int) - Method in interface nxopen.cae.Mesh0dBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setCsysOrientWcsToMcs(boolean) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setCsysPick(CoordinateSystem) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setCsysPurposeMode(OrientGeomBuilder.CsysPurposeModes) - Method in interface nxopen.cam.OrientGeomBuilder

Sets the CSYS purpose
License requirements: cam_base ("CAM BASE")
.

setCsysReferenceType(CamInspectionOperationCsysreferencetypes) - Method in interface nxopen.cam.InspectionConeFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setCsysReferenceType(CamInspectionOperationCsysreferencetypes) - Method in interface nxopen.cam.InspectionCparlnFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setCsysReferenceType(CamInspectionOperationCsysreferencetypes) - Method in interface nxopen.cam.InspectionCylinderFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setCsysReferenceType(CamInspectionOperationCsysreferencetypes) - Method in interface nxopen.cam.InspectionEdgePointFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setCsysReferenceType(CamInspectionOperationCsysreferencetypes) - Method in interface nxopen.cam.InspectionParplnFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setCsysReferenceType(CamInspectionOperationCsysreferencetypes) - Method in interface nxopen.cam.InspectionPlaneFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setCsysReferenceType(CamInspectionOperationCsysreferencetypes) - Method in interface nxopen.cam.InspectionPointFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setCsysReferenceType(CamInspectionOperationCsysreferencetypes) - Method in interface nxopen.cam.InspectionTorusFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setCsysRefType(CamInspectionOperationCsysreferencetypes) - Method in interface nxopen.cam.InspectionArcFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setCsysRefType(CamInspectionOperationCsysreferencetypes) - Method in interface nxopen.cam.InspectionCircleFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setCsysRefType(CamInspectionOperationCsysreferencetypes) - Method in interface nxopen.cam.InspectionLineFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setCsysRefType(CamInspectionOperationCsysreferencetypes) - Method in interface nxopen.cam.InspectionSphereFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setCsysShowThrough(boolean) - Method in interface nxopen.preferences.SessionVisualizationScreen

License requirements: None.

setCsystem(CartesianCoordinateSystem) - Method in interface nxopen.SketchInPlaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT")
.

setCsysType(PostGraphAlongPathBuilder.CsysType) - Method in interface nxopen.cae.PostGraphAlongPathBuilder

Sets csys type for extracting abscissa
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setCsysType(DynamicSectionTypes.CoordinateSystem) - Method in interface nxopen.display.DynamicSectionBuilder

License requirements: None.

setCsysVisibility(boolean) - Method in interface nxopen.tooling.MotionSimulationBuilder

License requirements: None.

setCsysWorkPartState(boolean) - Method in interface nxopen.weld.WeldPointBuilder

Sets the work coordinate systemstate
License requirements: ugweld ("UG WELD")
.

setCubicTypeMode(SectionSurfaceBuilderEx.CubicType) - Method in interface nxopen.features.SectionSurfaceBuilderEx

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setCue(String) - Method in interface nxopen.blockstyler.BodyCollector

License requirements: None.

setCue(String) - Method in interface nxopen.blockstyler.CompositeBlock

License requirements: None.

setCue(String) - Method in interface nxopen.blockstyler.CurveCollector

License requirements: None.

setCue(String) - Method in interface nxopen.blockstyler.FaceCollector

License requirements: None.

setCue(String) - Method in interface nxopen.blockstyler.SectionBuilder

License requirements: None.

setCue(String) - Method in interface nxopen.blockstyler.SelectElement

License requirements: None.

setCue(String) - Method in interface nxopen.blockstyler.SelectFeature

License requirements: None.

setCue(String) - Method in interface nxopen.blockstyler.SelectNode

License requirements: None.

setCue(String) - Method in interface nxopen.blockstyler.SelectObject

License requirements: None.

setCue(String) - Method in interface nxopen.blockstyler.SuperPoint

License requirements: None.

setCue(String) - Method in interface nxopen.blockstyler.SuperSection

License requirements: None.

setCurBodies(DirectUnfoldBuilder.BodyList) - Method in interface nxopen.tooling.DirectUnfoldBuilder

License requirements: None.

setCurrent(VisualReport) - Method in interface nxopen.visualreporting.VisualReportManager

License requirements: None.

setCurrentAppView(UFVariant) - Method in interface nxopen.uf.UFRoute

Refer to UF_ROUTE_set_current_app_view for documentation.

setCurrentComfortStudyName(String) - Method in interface nxopen.features.HumanBuilder

License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setCurrentDiscipline(String) - Method in interface nxopen.preferences.RoutingApplicationView

Sets the current discipline.

setCurrentFeature(Feature) - Method in interface nxopen.geometricutilities.LocalUntrimBuilder

Records the current feature before constructing the dialog.

setCurrentFeature(Tag) - Method in interface nxopen.uf.UFModeling

Refer to UF_MODL_set_current_feature for documentation.

setCurrentGroupIDColorIndex(WeldGroupIdColor) - Method in interface nxopen.weld.WeldPreferenceBuilder

License requirements: ugweld ("UG WELD")
.

setCurrentItemIndex(int) - Method in interface nxopen.annotations.ListBusinessModifier

Sets the current item index
License requirements: geometric_tol ("GDT")
.

setCurrentIteration(BaseIteration) - Method in interface nxopen.cae.ResultParametersWithProbe

Set current iteration
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setCurrentLevel(String) - Method in interface nxopen.uf.UFRoute

Deprecated.

The equivalent Open C method has retired

setCurrentLoadcase(BaseLoadcase) - Method in interface nxopen.cae.ResultParametersWithProbe

Set current loadcase
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setCurrentManikinSize(String) - Method in interface nxopen.features.vehicledesign.ManikinBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setCurrentMode(IssueManager.Mode) - Method in interface nxopen.issue.IssueManager

License requirements: nx_issue_mgmt ("NX Issue Tracking")
.

setCurrentMset(TaggedObject) - Method in interface nxopen.tooling.ElectrodeInitializationBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setCurrentNode(int) - Method in interface nxopen.blockstyler.Explorer

License requirements: None.

setCurrentObjectType(int) - Method in interface nxopen.features.PartGeometryCopySelectBuilder

License requirements: gateway ("UG GATEWAY")
.

setCurrentPartition(Tag) - Method in interface nxopen.uf.UFPs

Refer to UF_PS_set_current_partition for documentation.

setCurrentReferenceSheet(int) - Method in interface nxopen.weld.WeldPointBuilder

Set current refsheet
License requirements: ugweld ("UG WELD")
.

setCurrentRegion(String) - Method in interface nxopen.tooling.MWDefineRegionsBuilder

Set the current region
License requirements: None.

setCurrentSbfFile(String) - Method in interface nxopen.annotations.AnnotationManager

Sets the symbol font definition file.

setCurrentSelectedPort(TaggedObject) - Method in interface nxopen.routing.RunItemsBuilder

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setCurrentSite(PenetrationSite) - Method in interface nxopen.features.shipdesign.PenetrationUtils

Set current PenetrationSite
License requirements: nx_penetration_mgmt ("Penetration Management")

Created in NX8.0.0

setCurrentSpecification(String) - Method in interface nxopen.preferences.RoutingApplicationView

Sets the current specification for the current discipline.

setCurrentStandardPartItem(StandardPartItemBuilder) - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder

Sets the current standard part item that is edited.

setCurrentStateEnum(InspectionConstructedFeatureBuilder.CurrentStateType) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setCurrentStep(int) - Method in interface nxopen.blockstyler.Wizard

License requirements: None.

setCurrentStep(int) - Method in interface nxopen.geometricutilities.PlayButtonsBuilder

License requirements: None.

setCurrentString(String) - Method in interface nxopen.ReplaceExpressionsBuilder

License requirements: None.

setCurrentTile(String) - Method in interface nxopen.preferences.RoutingStock

Sets the current routing level/tile
License requirements: routing_base ("Routing Basic")
.

setCurrentZcsJunction(UFVariant, String) - Method in interface nxopen.uf.UFSim

Refer to UF_SIM_set_current_zcs_junction for documentation.

setCursorLocation(Point3d) - Method in interface nxopen.blockstyler.SpecifyLocation

License requirements: None.

setCursorLocation(Point3d) - Method in interface nxopen.features.subdivision.SelectCageObjectData

Sets the cursor location in absolute coordinates.

setCursorTracking(boolean) - Method in interface nxopen.drawings.ViewWorkflowBuilder

License requirements: drafting ("DRAFTING")
.

setCursorView(int) - Method in interface nxopen.uf.UFUi

Refer to UF_UI_set_cursor_view for documentation.

setCurvature(Offset) - Method in interface nxopen.features.GeometricConstraintData

License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setCurvatureCheck(SurfaceContinuityAnalysisBuilder.CurvatureType) - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder

License requirements: gateway ("UG GATEWAY")
.

setCurvatureColor(int) - Method in interface nxopen.preferences.SessionModeling

Sets the curvature color
License requirements: None.

setCurvatureDerivative(Offset) - Method in interface nxopen.features.GeometricConstraintData

License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setCurvatureFactor(double) - Method in interface nxopen.cam.InspectionCurveFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setCurvatureFactor(double) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setCurvatureSectionPlane(Plane) - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setCurvatureSensitivity(int) - Method in interface nxopen.facet.DetectPrimitivesBuilder

License requirements: None.

setCurvatureTolerance(double) - Method in interface nxopen.features.AestheticFaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setCurvatureTolerance(double) - Method in interface nxopen.features.NSidedSurfaceBuilder

License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

setCurvatureTolerance(double) - Method in interface nxopen.features.SectionSurfaceBuilder

Deprecated.

Deprecated in NX9.0.0. Use SectionSurfaceBuilderEx instead.

setCurvatureTolerance(double) - Method in interface nxopen.features.StudioSurfaceBuilder

License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

setCurvatureTolerance(double) - Method in interface nxopen.features.ThroughCurveMeshBuilder

License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

setCurvatureTolerance(double) - Method in interface nxopen.features.ThroughCurvesBuilder

License requirements: features_modeling ("FEATURES MODELING") OR nx_freeform_1 ("basic freeform modeling")
.

setCurvatureType(FaceCurvatureAnalysisBuilder.CurvatureTypes) - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setCurve(NXObject) - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder

License requirements: None.

setCurve(NXObject) - Method in interface nxopen.cam.InspectionScanCurveBuilder

License requirements: None.

setCurve(Curve) - Method in interface nxopen.features.GeodesicTrimBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setCurve(Section) - Method in interface nxopen.features.GlobalShapingCurveOffsetBuilder

License requirements: None.

setCurveChainingMethod(RoutingPath.ChainMethod) - Method in interface nxopen.preferences.RoutingPath

License requirements: routing_base ("Routing Basic")
.

setCurveColor(NXColor) - Method in interface nxopen.display.DynamicSectionBuilder

License requirements: None.

setCurveColor(int) - Method in interface nxopen.preferences.PartSketch

Sets the sketch curve color
License requirements: None.

setCurveColorOption(DynamicSectionTypes.CurveColorOption) - Method in interface nxopen.display.DynamicSectionBuilder

License requirements: None.

setCurveControl(StyledCornerBuilder.CurveControlTypes) - Method in interface nxopen.features.StyledCornerBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setCurveCount(int) - Method in interface nxopen.features.shipdesign.TraceLinesBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setCurveCurvatureDisplay(PartModeling.CurveCurvatureDisplayType) - Method in interface nxopen.preferences.PartModeling

Sets the curve curvature display.

setCurveCurvatureShowCap(boolean) - Method in interface nxopen.preferences.PartModeling

Sets the curve curvature display show cap line
License requirements: None.

setCurveCurvatureStyle(int) - Method in interface nxopen.preferences.PartModeling

Sets the curve curvature display style
License requirements: None.

setCurveDirection(NXObject, int) - Method in interface nxopen.annotations.HatchBuilder

Set direction of a curve to the annotation The number of diection map elements need to specify before to the direction of the curve elements to the annotation
License requirements: drafting ("DRAFTING")
.

setCurveDirectionOption(BridgeCurveConnectivity.CurveDirectionOptions) - Method in interface nxopen.geometricutilities.BridgeCurveConnectivity

License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_1 ("basic freeform modeling")
.

setCurveEndOption(TrimCurveBuilder.CurveEndOptions) - Method in interface nxopen.features.TrimCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setCurveExtensionType(TrimCurveBuilder.CurveExtensionTypes) - Method in interface nxopen.features.TrimCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setCurveFitData(UFModl.CurveFitData) - Method in interface nxopen.uf.UFModl

Refer to UF_MODL_set_curve_fit_data for documentation.

setCurveFitMethod(SessionModeling.CurveFitMethodType) - Method in interface nxopen.preferences.SessionModeling

Sets the curve fit method.

setCurveFitMethod(int) - Method in interface nxopen.uf.UFModlGeneral

Refer to UF_MODL_set_curve_fit_method for documentation.

setCurveFitOption(BridgeCurveBuilder.CurveFitTypes) - Method in interface nxopen.features.BridgeCurveBuilder

Deprecated.

Deprecated in NX8.5.0. Use BridgeCurveBuilderEx instead.

setCurveItem(Section) - Method in interface nxopen.cam.DriveChainItemBuilder

License requirements: cam_base ("CAM BASE")
.

setCurveJoinMethod(CurveFitData.Join) - Method in interface nxopen.geometricutilities.CurveFitData

License requirements: None.

setCurveJoinMethod(CurveFitJoin.JoinMethod) - Method in interface nxopen.geometricutilities.CurveFitJoin

Sets the curve join method
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setCurveMode(InspectionMethodBuilder.ScanCurveModeTypes) - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setCurveMode(InspectionMethodBuilder.ScanCurveModeTypes) - Method in interface nxopen.cam.InspectionScanCurveBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setCurveName(String) - Method in interface nxopen.cae.QueryCurveBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setCurveOrientation(DatumAxisBuilder.CurveOrientations) - Method in interface nxopen.features.DatumAxisBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setCurveParameterizedType(CurveParameterizedTypes) - Method in interface nxopen.motion.PointOnCurveBuilder

License requirements: mechanisms ("MECHANISMS")
.

setCurvePointsBy(PointSetBuilder.CurvePointsType) - Method in interface nxopen.features.PointSetBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setCurveRules(int) - Method in interface nxopen.blockstyler.CurveCollector

License requirements: None.

setCurveRules(int) - Method in interface nxopen.blockstyler.SectionBuilder

License requirements: None.

setCurveRules(int) - Method in interface nxopen.blockstyler.SuperPoint

License requirements: None.

setCurveRules(int) - Method in interface nxopen.blockstyler.SuperSection

License requirements: None.

setCurves(Curve[]) - Method in interface nxopen.cam.ToolAxisTilt

Sets the tool axis curve
License requirements: cam_base ("CAM BASE")
.

setCurves(NXObject[]) - Method in interface nxopen.motion.PointOnCurveBuilder

Sets the curves
License requirements: mechanisms ("MECHANISMS")
.

setCurves(boolean) - Method in interface nxopen.ObjectTypeSelector

License requirements: None.

setCurves(Curve[]) - Method in interface nxopen.routing.BuiltInPath

Sets the array of curves referenced by the Built-In-Path object.

setCurveScan(boolean) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setCurveSettings(CurveSettings) - Method in interface nxopen.features.ScaleCurveBuilder

License requirements: None.

setCurveToExtend(Curve) - Method in interface nxopen.die.AddendumSectionBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setCurveTolerance(double) - Method in interface nxopen.preferences.PartVisualizationLine

Sets the curve tolerance.

setCurveToleranceFactor(double) - Method in interface nxopen.motion.CurveContactRecurdyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using CurveContactRecurdyn.curveToleranceFactorExpression() to query or edit it.

setCurveTrimRegionOption(TrimCurveBuilder.CurveTrimRegionOptions) - Method in interface nxopen.features.TrimCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setCurveType(PathConstraintFrameBuilder.CurveTypes) - Method in interface nxopen.mechatronics.PathConstraintFrameBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setCurveType(SketchProjectBuilder.OutputCurve) - Method in interface nxopen.SketchProjectBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setCurveTypeEdges(ViewProjectionBuilder.CurveType) - Method in interface nxopen.drawings.ViewProjectionBuilder

License requirements: nx_layout ("NX Layout")
.

setCurveTypePlane1(ViewProjectionBuilder.CurveType) - Method in interface nxopen.drawings.ViewProjectionBuilder

License requirements: nx_layout ("NX Layout")
.

setCurveTypePlane2(ViewProjectionBuilder.CurveType) - Method in interface nxopen.drawings.ViewProjectionBuilder

License requirements: nx_layout ("NX Layout")
.

setCurveUsage(QueryCurveUsageOptions.CurveUsageType) - Method in interface nxopen.cae.QueryCurveUsageOptions

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setCushionAngleA27(String) - Method in interface nxopen.HumanPosturePredictionBuilder

License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setCushionDirection(Direction) - Method in interface nxopen.tooling.DefineCamBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setCushionFirmness(HumanPosturePredictionBuilder.CushionFirmnessType) - Method in interface nxopen.HumanPosturePredictionBuilder

License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setCushionName(String) - Method in interface nxopen.tooling.DefineCamBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setCustomAboveLength(double) - Method in interface nxopen.weld.DatumCommonBuilder

License requirements: ugweld ("UG WELD")
.

setCustomAngleTolerance(double) - Method in interface nxopen.drawings.ShadingViewStyle

Sets the custom angle tolerance.

setCustomAngleTolerance(double) - Method in interface nxopen.preferences.ShadingViewPreferences

Sets the custom angle tolerance.

setCustomAxis(Axis) - Method in interface nxopen.formboard.FlipComponentBuilder

License requirements: routing_harness ("Routing Harness")
.

setCustomCylinderAbove(double) - Method in interface nxopen.weld.WeldPointBuilder

Sets the distance the custom cylinder should be created above the weld point
License requirements: ugweld ("UG WELD")
.

setCustomEdgeTolerance(double) - Method in interface nxopen.drawings.ShadingViewStyle

Sets the custom edge tolerance.

setCustomEdgeTolerance(double) - Method in interface nxopen.preferences.ShadingViewPreferences

Sets the custom edge tolerance.

setCustomer(String) - Method in interface nxopen.tooling.QuickQuotationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setCustomerArea(Tag, String) - Method in interface nxopen.uf.UFPart

Refer to UF_PART_set_customer_area for documentation.

setCustomerSbfFile() - Method in interface nxopen.uf.UFDrf

Refer to UF_DRF_set_customer_sbf_file for documentation.

setCustomerValue(String) - Method in interface nxopen.annotations.CustomerValueBusinessModifierBuilder

License requirements: geometric_tol ("GDT")
.

setCustomFaceTolerance(double) - Method in interface nxopen.drawings.ShadingViewStyle

Sets the custom face tolerance.

setCustomFaceTolerance(double) - Method in interface nxopen.preferences.ShadingViewPreferences

Sets the custom face tolerance.

setCustomFeed(boolean) - Method in interface nxopen.cam.GeometrySet

License requirements: cam_base ("CAM BASE")
.

setCustomFeed(boolean) - Method in interface nxopen.cam.SurfaceDriveGeometrySet

License requirements: cam_base ("CAM BASE")
.

setCustomFeed(UFVariant, UFDrpos.FeedUse, UFDrpos.FeedUnit, double) - Method in interface nxopen.uf.UFDrpos

Refer to UF_DRPOS_set_custom_feed for documentation.

setCustomFeedRate(boolean) - Method in interface nxopen.cam.BoundaryMillingMemberSet

License requirements: cam_base ("CAM BASE")
.

setCustomFeedRate(boolean) - Method in interface nxopen.cam.BoundaryMillingSet

License requirements: cam_base ("CAM BASE")
.

setCustomFeedrate(boolean) - Method in interface nxopen.cam.PathLinearMotion

License requirements: cam_base ("CAM BASE")
.

setCustomFeedType(BoundaryTurnMemberFeed.FeedType) - Method in interface nxopen.cam.BoundaryTurnMemberFeed

License requirements: cam_base ("CAM BASE")
.

setCustomHumanFileName(String) - Method in interface nxopen.features.HumanBuilder

Sets custom human figure file name
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setCustomizedViewLabel(boolean) - Method in interface nxopen.drawings.ViewDetailLabelBuilder

License requirements: drafting ("DRAFTING")
.

setCustomizedViewLabel(boolean) - Method in interface nxopen.drawings.ViewLabelBuilder

License requirements: drafting ("DRAFTING")
.

setCustomizedViewLabel(boolean) - Method in interface nxopen.drawings.ViewSectionLabelBuilder

License requirements: drafting ("DRAFTING")
.

setCustomizedViewLabelText(String[]) - Method in interface nxopen.drawings.ViewDetailLabelBuilder

Sets the customized view label text
License requirements: drafting ("DRAFTING")
.

setCustomizedViewLabelText(String[]) - Method in interface nxopen.drawings.ViewLabelBuilder

Sets the customized view label text
License requirements: drafting ("DRAFTING")
.

setCustomizedViewLabelText(String[]) - Method in interface nxopen.drawings.ViewSectionLabelBuilder

Sets the customized view label text
License requirements: drafting ("DRAFTING")
.

setCustomMemberData(RoughFinishTurningBuilder.CustomMemberDataTypes) - Method in interface nxopen.cam.RoughFinishTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setCustomMemberDataDistance(double) - Method in interface nxopen.cam.RoughFinishTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setCustomMessage(String) - Method in interface nxopen.visualreporting.GroupLabel

License requirements: nx_visual_reporting ("Visual Reporting")
.

setCustomMessage(String) - Method in interface nxopen.visualreporting.Property

License requirements: nx_visual_reporting ("Visual Reporting")
.

setCustomMessage(String) - Method in interface nxopen.visualreporting.ResultCategory

License requirements: nx_visual_reporting ("Visual Reporting")
.

setCustomMessage(String) - Method in interface nxopen.visualreporting.VisualReport

License requirements: nx_visual_reporting ("Visual Reporting")
.

setCustomMessageOfGroupLabel(GroupLabel, String) - Method in interface nxopen.visualreporting.VisualReportBuilder

Sets the custom message of the given GroupLabel .

setCustomMessageOfReport(String) - Method in interface nxopen.visualreporting.VisualReportBuilder

License requirements: None.

setCustomMessageOfReportingProperty(String) - Method in interface nxopen.visualreporting.VisualReportBuilder

License requirements: None.

setCustomNormalX(double) - Method in interface nxopen.drawings.View2dOrientBuilder

Sets the X component of the custom view-normal vector
License requirements: drafting ("DRAFTING")
.

setCustomNormalY(double) - Method in interface nxopen.drawings.View2dOrientBuilder

Sets the Y component of the custom view-normal vector
License requirements: drafting ("DRAFTING")
.

setCustomNormalZ(double) - Method in interface nxopen.drawings.View2dOrientBuilder

Sets the Z component of the custom view-normal vector
License requirements: drafting ("DRAFTING")
.

setCustomOffset(boolean) - Method in interface nxopen.cam.BoundaryMemberSet

License requirements: cam_base ("CAM BASE")
.

setCustomOffset(boolean) - Method in interface nxopen.cam.BoundarySet

License requirements: cam_base ("CAM BASE")
.

setCustomOrientationMethod(View2dOrientBuilder.CustomMethod) - Method in interface nxopen.drawings.View2dOrientBuilder

License requirements: drafting ("DRAFTING")
.

setCustomPaper(int) - Method in interface nxopen.PrintBuilder

License requirements: None.

setCustomPartOffset(boolean) - Method in interface nxopen.cam.GeometrySet

License requirements: cam_base ("CAM BASE")
.

setCustomPrimaryX(double) - Method in interface nxopen.drawings.View2dOrientBuilder

Sets the X component of the custom view-primary vector
License requirements: drafting ("DRAFTING")
.

setCustomPrimaryY(double) - Method in interface nxopen.drawings.View2dOrientBuilder

Sets the Y component of the custom view-primary vector
License requirements: drafting ("DRAFTING")
.

setCustomPrimaryZ(double) - Method in interface nxopen.drawings.View2dOrientBuilder

Sets the Z component of the custom view-primary vector
License requirements: drafting ("DRAFTING")
.

setCustomRadius(double) - Method in interface nxopen.weld.DatumCommonBuilder

License requirements: ugweld ("UG WELD")
.

setCustomRadius(double) - Method in interface nxopen.weld.WeldPointBuilder

Sets the radius to create the sphere, cylinder, or cone with
License requirements: ugweld ("UG WELD")
.

setCustomScratchDirectory(String) - Method in interface nxopen.cae.optimization.TBSOutputControlOptions

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setCustomShapeSizeLowerLimit(int) - Method in interface nxopen.shapesearch.ShapeSearchBuilder

License requirements: shape_search ("Shape Search")
.

setCustomShapeSizeUpperLimit(int) - Method in interface nxopen.shapesearch.ShapeSearchBuilder

License requirements: shape_search ("Shape Search")
.

setCustomStock(boolean) - Method in interface nxopen.cam.BoundaryMillingMemberSet

License requirements: cam_base ("CAM BASE")
.

setCustomStock(boolean) - Method in interface nxopen.cam.BoundaryMillingSet

License requirements: cam_base ("CAM BASE")
.

setCustomStock(boolean) - Method in interface nxopen.cam.BoundaryTurnSet

License requirements: cam_base ("CAM BASE")
.

setCustomStock(boolean) - Method in interface nxopen.cam.GeometrySet

License requirements: cam_base ("CAM BASE")
.

setCustomStock(boolean) - Method in interface nxopen.cam.SurfaceDriveGeometrySet

License requirements: cam_base ("CAM BASE")
.

setCustomSymbolAngle(Tag, double) - Method in interface nxopen.uf.UFDrf

Refer to UF_DRF_set_custom_symbol_angle for documentation.

setCustomSymbolScale(double) - Method in interface nxopen.annotations.TextWithSymbolsBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setCustomSymbolScale(Tag, double) - Method in interface nxopen.uf.UFDrf

Refer to UF_DRF_set_custom_symbol_scale for documentation.

setCustomSymbolsInForeground(boolean) - Method in interface nxopen.CGMBuilder

License requirements: None.

setCustomSymbolsInForeground(boolean) - Method in interface nxopen.PlotBuilder

License requirements: None.

setCustomSymbolsInForeground(boolean) - Method in interface nxopen.PrintBuilder

License requirements: None.

setCustomSymbolsInForeground(boolean) - Method in interface nxopen.PrintPDFBuilder

License requirements: None.

setCustomSymbolSmashToSketch(boolean) - Method in interface nxopen.preferences.PartDrafting

Sets the custom symbol smash behavior.

setCustomTolerance(boolean) - Method in interface nxopen.cam.GeometrySet

License requirements: cam_base ("CAM BASE")
.

setCustomTolerance(boolean) - Method in interface nxopen.cam.SurfaceDriveGeometrySet

License requirements: cam_base ("CAM BASE")
.

setCustomTotalCylinderLength(double) - Method in interface nxopen.weld.WeldPointBuilder

Sets the total length of the cylinder to be created.

setCustomTotalLength(double) - Method in interface nxopen.weld.DatumCommonBuilder

License requirements: ugweld ("UG WELD")
.

setCustomType(DatumCommonBuilder.CustomTypes) - Method in interface nxopen.weld.DatumCommonBuilder

License requirements: ugweld ("UG WELD")
.

setCustomTypeName(String) - Method in interface nxopen.weld.DatumCommonBuilder

License requirements: ugweld ("UG WELD")
.

setCustomXAngle(double) - Method in interface nxopen.drawings.View2dOrientBuilder

License requirements: drafting ("DRAFTING")
.

setCustomYAngle(double) - Method in interface nxopen.drawings.View2dOrientBuilder

License requirements: drafting ("DRAFTING")
.

setCustomZAngle(double) - Method in interface nxopen.drawings.View2dOrientBuilder

License requirements: drafting ("DRAFTING")
.

setCut(NXColor) - Method in interface nxopen.cam.PathDisplayColors

License requirements: cam_base ("CAM BASE")
.

setCut(boolean) - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setCut(boolean) - Method in interface nxopen.gateway.CopyCutBuilder

License requirements: None.

setCutAreaColor(NXColor) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setCutAreaSelection(Preferences.CutAreaSelectionTypes) - Method in interface nxopen.cam.Preferences

Deprecated.

Deprecated in NX8.0.0. Use CAM.Preferences#getSelection and CAM.Preferences#setSelection instead.

setCutbackLength(double) - Method in interface nxopen.routing.IAxisPort

Sets the cutback length of a port, i.e. the length along the wire from the port where individual wires leave a bundle to attach to pins
License requirements: routing_base ("Routing Basic")

Created in NX4.0.0

setCutbackLengthObject(Expression) - Method in interface nxopen.routing.IAxisPort

Sets the cutback length object of a port, i.e. an expression representing the length along the wire from the port where individual wires leave a bundle to attach to pins
License requirements: routing_base ("Routing Basic")

Created in NX4.0.0

setCutbackOption(ModelTerminalsBuilder.CutBackLocationOption) - Method in interface nxopen.routing.ModelTerminalsBuilder

License requirements: routing_harness ("Routing Harness")
.

setCutBelowOverhangingBlank(boolean) - Method in interface nxopen.cam.MillCutParameters

License requirements: cam_base ("CAM BASE")
.

setCutBelowToolContact(boolean) - Method in interface nxopen.cam.MillCutParameters

License requirements: cam_base ("CAM BASE")
.

setCutBetweenLevels(boolean) - Method in interface nxopen.cam.FlowCutSteepContainment

License requirements: cam_base ("CAM BASE")
.

setCutBetweenLevels(boolean) - Method in interface nxopen.cam.MillCutParameters

License requirements: cam_base ("CAM BASE")
.

setCutColor(int) - Method in interface nxopen.features.MasterCutBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setCutcomMinimumAngle(double) - Method in interface nxopen.cam.NcmHoleMachining

License requirements: cam_base ("CAM BASE")
.

setCutcomMinimumAngle(double) - Method in interface nxopen.cam.NcmPlanarBuilder

License requirements: cam_base ("CAM BASE")
.

setCutcomOff(NcmWedmBuilder.CutcomOffTypes) - Method in interface nxopen.cam.NcmWedmBuilder

License requirements: cam_base ("CAM BASE")
.

setCutcomOn(NcmWedmBuilder.CutcomOnTypes) - Method in interface nxopen.cam.NcmWedmBuilder

License requirements: cam_base ("CAM BASE")
.

setCutcomOutputContactPoint(boolean) - Method in interface nxopen.cam.NcmHoleMachining

License requirements: cam_base ("CAM BASE")
.

setCutcomOutputContactPoint(boolean) - Method in interface nxopen.cam.NcmPlanarBuilder

License requirements: cam_base ("CAM BASE")
.

setCutcomOutputPlane(boolean) - Method in interface nxopen.cam.NcmHoleMachining

License requirements: cam_base ("CAM BASE")
.

setCutcomOutputPlane(boolean) - Method in interface nxopen.cam.NcmPlanarBuilder

License requirements: cam_base ("CAM BASE")
.

setCutcomReg(int) - Method in interface nxopen.cam.NcmWedmBuilder

License requirements: cam_base ("CAM BASE")
.

setCutcomRegister(int) - Method in interface nxopen.sim.KinematicComponentBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setCutcomRegisterFlag(boolean) - Method in interface nxopen.cam.NcmWedmBuilder

License requirements: cam_base ("CAM BASE")
.

setCutcomRegisterToggle(boolean) - Method in interface nxopen.cam.ToolChangeCiBuilder

License requirements: cam_base ("CAM BASE")
.

setCutcomRegisterType(MachinePocketGroupBuilder.RegisterType) - Method in interface nxopen.cam.MachinePocketGroupBuilder

Deprecated.

Deprecated in NX8.5.0. Use CAM.MachinePocketGroupBuilder#setCutcomIdBuilder instead.

setCutcomRegisterType(KinematicComponentBuilder.RegisterTypes) - Method in interface nxopen.sim.KinematicComponentBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setCutcomTrackingPointType(int) - Method in interface nxopen.cam.NcmPlanarBuilder

License requirements: cam_base ("CAM BASE")
.

setCutcomType(NcmHoleMachining.CutcomTypes) - Method in interface nxopen.cam.NcmHoleMachining

License requirements: cam_base ("CAM BASE")
.

setCutcomType(NcmPlanarBuilder.CutcomTypes) - Method in interface nxopen.cam.NcmPlanarBuilder

License requirements: cam_base ("CAM BASE")
.

setCutConnection(CutParametersCutConnectionTypes) - Method in interface nxopen.cam.TurnCutParameters

License requirements: cam_base ("CAM BASE")
.

setCutCount(int) - Method in interface nxopen.features.shipdesign.EdgeCutBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setCutDepths(VolumeBased25DMillingOperationBuilder.CutDepthsType) - Method in interface nxopen.cam.VolumeBased25DMillingOperationBuilder

License requirements: None.

setCutDirection(CutDirection.Types) - Method in interface nxopen.cam.Blade

License requirements: cam_base ("CAM BASE")
.

setCutDirection(CylinderMillingCutParameters.CutDirectionTypes) - Method in interface nxopen.cam.CylinderMillingCutParameters

Deprecated.

Deprecated in NX9.0.2. Use FeatureMillingCutParameters.cuttingDirection() and FeatureMillingCutParameters.setCuttingDirection(nxopen.cam.FeatureMillingCutParameters.CuttingDirectionTypes) instead.

setCutDirection(DmRotaryFloorFinishBuilder.CutDirection) - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder

Set cut direction.

setCutDirection(DmSurfBuilder.CutDirection) - Method in interface nxopen.cam.DmSurfBuilder

Set the cut direction
License requirements: cam_base ("CAM BASE")
.

setCutDirection(SurfaceContourBuilder.CutDirectionTypes) - Method in interface nxopen.cam.SurfaceContourBuilder

License requirements: cam_base ("CAM BASE")
.

setCutDirection(Direction) - Method in interface nxopen.cam.SurfaceRegions

License requirements: cam_base ("CAM BASE")
.

setCutDirection(ThreadMillingCutParameters.CutDirectionTypes) - Method in interface nxopen.cam.ThreadMillingCutParameters

Deprecated.

Deprecated in NX9.0.2. Use CAM.FeatureMillingCutParameters#cuttingDirection and CAM.FeatureMillingCutParameters#setCuttingDirection instead.

setCutDirection(int) - Method in interface nxopen.cam.WedmBasedGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setCutDirection(WedmCutParameters.CutDirectionTypes) - Method in interface nxopen.cam.WedmCutParameters

License requirements: cam_base ("CAM BASE")
.

setCutDirection(Direction) - Method in interface nxopen.drawings.SectionLineBuilder

Deprecated.

Deprecated in NX10.0.0. This API is not supported yet and should not be used.

setCutDirectionType(DmRotaryFloorFinishBuilder.CutDirType) - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder

License requirements: cam_base ("CAM BASE")
.

setCutDirType(LaserCutDirection.Types) - Method in interface nxopen.cam.LaserCutDirection

License requirements: cam_base ("CAM BASE")
.

setCutFaceColor(NXColor) - Method in interface nxopen.drawings.ViewStyleShadingBuilder

License requirements: drafting ("DRAFTING")
.

setCutFaceDrops(boolean) - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setCutFillets(CutParametersFilletsTypes) - Method in interface nxopen.cam.TurnCutParameters

License requirements: cam_base ("CAM BASE")
.

setCutInfiniteEnabled(boolean) - Method in interface nxopen.geometricanalysis.sectionanalysis.InteractiveBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setCutLength(double) - Method in interface nxopen.routing.electrical.ElectricalStockDevice

Sets the cut length.

setCutLevelType(AreaMillingSteepContainment.CutLevelTypes) - Method in interface nxopen.cam.AreaMillingSteepContainment

License requirements: cam_base ("CAM BASE")
.

setCutLevelType(CutLevel.Types) - Method in interface nxopen.cam.CutLevel

License requirements: cam_base ("CAM BASE")
.

setCutLevelType(CutLevelPlanar.Types) - Method in interface nxopen.cam.CutLevelPlanar

License requirements: cam_base ("CAM BASE")
.

setCutLevelType(FlowCutSteepContainment.CutLevelTypes) - Method in interface nxopen.cam.FlowCutSteepContainment

License requirements: cam_base ("CAM BASE")
.

setCutLocation(Point) - Method in interface nxopen.drawings.HalfSectionLineBuilder

Deprecated.

Deprecated in NX10.0.0. Use Drawings.SectionViewBuilder#sectionLineSegments instead.

setCutLocation3D(Point) - Method in interface nxopen.drawings.OrientedSectionLineBuilder

Deprecated.

Deprecated in NX10.0.0. This API is not supported yet and should not be used.

setCutMethod(String) - Method in interface nxopen.cam.MethodBuilder

Set cut method
License requirements: cam_base ("CAM BASE")
.

setCutoffAngle(String) - Method in interface nxopen.features.sheetmetal.MigratedPanelBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setCutoffDistance(double) - Method in interface nxopen.cam.WedmBasedGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setCutoffFlag(int) - Method in interface nxopen.cam.WedmBasedGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setCutoffFlag(int) - Method in interface nxopen.cam.WedmGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setCutoffFlag(int) - Method in interface nxopen.cam.WedmOperationBuilder

License requirements: cam_base ("CAM BASE")
.

setCutoffStock(double) - Method in interface nxopen.cam.WedmBasedGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setCutoffText(String) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder

License requirements: None.

setCutoffType(SearchModelViewBuilder.TextComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder

License requirements: None.

setCutOnlyAlongFloorAndWall(boolean) - Method in interface nxopen.cam.DmCmMultiplePassesCiBuilder

License requirements: cam_base ("CAM BASE")
.

setCutOrder(CutParametersCutOrderTypes) - Method in interface nxopen.cam.MillCutParameters

License requirements: cam_base ("CAM BASE")
.

setCutOrder(WedmCutOrderBuilder.Type) - Method in interface nxopen.cam.WedmCutOrderBuilder

License requirements: cam_base ("CAM BASE")
.

setCutoutDefType(LaserCutoutDefinition.Types) - Method in interface nxopen.cam.LaserCutoutDefinition

License requirements: cam_base ("CAM BASE")
.

setCutoutDepth(String) - Method in interface nxopen.features.sheetmetal.DrawnCutoutBuilder

Deprecated.

Deprecated in NX10.0.0. Use Expression.setRightHandSide(java.lang.String) on the Expression object returned from DrawnCutoutBuilder.cutoutDepth() instead.

setCutoutPart(Part) - Method in interface nxopen.features.shipdesign.PenetrationAssociationBuilder

License requirements: nx_penetration_mgmt ("Penetration Management")
.

setCutoutSection(Section) - Method in interface nxopen.cam.LaserCutoutDefinition

License requirements: cam_base ("CAM BASE")
.

setCutPattern(CutPatternBuilder.Types) - Method in interface nxopen.cam.CutPatternBuilder

License requirements: cam_base ("CAM BASE")
.

setCutPattern(CylinderMillingBuilder.CutPatternTypes) - Method in interface nxopen.cam.CylinderMillingBuilder

License requirements: cam_base ("CAM BASE")
.

setCutPatternCenter(DmBndBuilder.BndPatternCenterTypes) - Method in interface nxopen.cam.DmBndBuilder

License requirements: None.

setCutRegions(RoughFinishTurningBuilder.CutRegionsTypes) - Method in interface nxopen.cam.RoughFinishTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setCutRegionsContainment(CutRegionsBuilder.CutRegionsContainmentTypes) - Method in interface nxopen.cam.CutRegionsBuilder

License requirements: None.

setCutRegionSelectionMode(TurnFeatureGeomBuilder.CutRegionSelectionModes) - Method in interface nxopen.cam.TurnFeatureGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setCutRegionSelectionPoint(Point) - Method in interface nxopen.cam.TurnFeatureGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setCutRegionsProgram(CutRegionsBuilder.CutRegionsProgramTypes) - Method in interface nxopen.cam.CutRegionsBuilder

License requirements: None.

setCutRegionsStatus(CutRegionsBuilder.CutRegionsStatusTypes) - Method in interface nxopen.cam.CutRegionsBuilder

License requirements: None.

setCuts(boolean) - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setCutSequence(TurnGrooveCornerControl.CutSequenceTypes) - Method in interface nxopen.cam.TurnGrooveCornerControl

License requirements: cam_base ("CAM BASE")
.

setCutStepFirstCut(int) - Method in interface nxopen.cam.DPMItpBuilder

Deprecated.

Deprecated in NX10.0.1. Use DmStreamlineCutStep.firstCut() and DmStreamlineCutStep.setFirstCut(int) instead.

setCutStepSecondCut(int) - Method in interface nxopen.cam.DPMItpBuilder

Deprecated.

Deprecated in NX10.0.1. Use DmStreamlineCutStep.secondCut() and DmStreamlineCutStep.setSecondCut(int) instead.

setCutStepThirdCut(int) - Method in interface nxopen.cam.DPMItpBuilder

Deprecated.

Deprecated in NX10.0.1. Use DmStreamlineCutStep.thirdCut() and DmStreamlineCutStep.setThirdCut(int) instead.

setCutStepType(DPMItpBuilder.StepMethodOption) - Method in interface nxopen.cam.DmStreamlineCutStep

License requirements: cam_base ("CAM BASE")
.

setCutterSubtype(MillToolBuilder.CutterSubtypes) - Method in interface nxopen.cam.MillToolBuilder

License requirements: None.

setCuttingDirection(FeatureMillingCutParameters.CuttingDirectionTypes) - Method in interface nxopen.cam.FeatureMillingCutParameters

License requirements: cam_base ("CAM BASE")
.

setCuttingInterfaceConfigFile(String) - Method in interface nxopen.features.shipdesign.ProfileListBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setCuttingInterfaceOutputFile(String) - Method in interface nxopen.features.shipdesign.ProfileListBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setCuttingMode(UFVariant, UFSim.CuttingMode) - Method in interface nxopen.uf.UFSim

Refer to UF_SIM_set_cutting_mode for documentation.

setCuttingPerimeter(String) - Method in interface nxopen.tooling.ForceCalculationBuilder

License requirements: None.

setCuttingPlaneSymbolArrowDirection(CuttingPlaneSymbolBuilder.ArrowDirectionOption) - Method in interface nxopen.annotations.PmiPreferences

License requirements: None.

setCuttingPlaneSymbolArrowLength(double) - Method in interface nxopen.annotations.PmiPreferences

Sets the cutting plane symbol arrow length
License requirements: None.

setCuttingPlaneSymbolColor(NXColor) - Method in interface nxopen.annotations.PmiPreferences

Sets the cutting plane symbol color
License requirements: None.

setCuttingPlaneSymbolSectionPrefix(String) - Method in interface nxopen.annotations.PmiPreferences

Sets the section prefix for cutting plane symbol
License requirements: None.

setCuttingPlaneSymbolShadedPlane(boolean) - Method in interface nxopen.annotations.PmiPreferences

Sets the cutting plane symbol shaded plane option
License requirements: None.

setCuttingPlaneSymbolStartingLetter(String) - Method in interface nxopen.annotations.PmiPreferences

Sets the starting letter for cutting plane symbol
License requirements: None.

setCuttingPlaneSymbolText(String) - Method in interface nxopen.annotations.CuttingPlaneSymbolBuilder

License requirements: geometric_tol ("GDT")
.

setCuttingPlaneSymbolTextPlaneRelativeToArrow(CuttingPlaneSymbolBuilder.TextPlaneRelativeArrow) - Method in interface nxopen.annotations.PmiPreferences

License requirements: None.

setCutToBoundary(boolean) - Method in interface nxopen.tooling.EnlargeSurfaceBuilder

License requirements: None.

setCutType(DPMItpBuilder.CutTypeOption) - Method in interface nxopen.cam.DPMItpBuilder

License requirements: cam_base ("CAM BASE")
.

setCutType(TurnRoughFinishTestCut.CutTypes) - Method in interface nxopen.cam.TurnRoughFinishTestCut

License requirements: cam_base ("CAM BASE")
.

setCutType(NormalCutoutBuilder.CutTypeOptions) - Method in interface nxopen.features.sheetmetal.NormalCutoutBuilder

Sets the cut type for the normal cutout.

setCutType(int) - Method in interface nxopen.features.SnipSurfaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setCutView(ModelingView) - Method in interface nxopen.features.MasterCutBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setCutViewUpdateDelayed(boolean) - Method in interface nxopen.preferences.PartModeling

License requirements: None.

setCutWallsOnly(boolean) - Method in interface nxopen.cam.MillCutParameters

License requirements: cam_base ("CAM BASE")
.

setCyclesToFailure(double) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setCycleTime(double) - Method in interface nxopen.sim.MachineToolConfiguration

License requirements: None.

setCycleTrackingPoint(String) - Method in interface nxopen.cam.CenterlineDrillTurningBuilder

Sets the cycle tracking point
License requirements: cam_base ("CAM BASE")
.

setCycleTrackingPoint(String) - Method in interface nxopen.cam.Cycle

License requirements: cam_base ("CAM BASE")
.

setCycleType(String) - Method in interface nxopen.cam.Cycle

License requirements: cam_base ("CAM BASE")
.

setCycleType(ProbeInspectBorebossMoveBuilder.Cycle) - Method in interface nxopen.cam.ProbeInspectBorebossMoveBuilder

License requirements: None.

setCyclicStressStrainModel(DurabilityEventFatigueSettingsBuilder.CyclicStressStrainModelEnum) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setCyclicSymmetricParameters(CyclicSymmetricParameters) - Method in interface nxopen.cae.ResultParameters

Set Cyclic Symmetric Parameters type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setCyclicSymmetryCsys(CoordinateSystem) - Method in interface nxopen.cae.BaseFemPart

Sets the cyclic symmetry csys associated to the fem
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setCyclicSymmetryData(boolean, CoordinateSystem) - Method in interface nxopen.cae.FemCreationOptions

Set the cyclic symmetry coordinate system options
License requirements: None.

setCyclicType(CamProfileBuilder.ProfileCyclicType) - Method in interface nxopen.mechatronics.CamProfileBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setCyclicType(MotionProfileBuilder.ProfileCyclicType) - Method in interface nxopen.mechatronics.MotionProfileBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setCylDim(Tag, int) - Method in interface nxopen.uf.UFDrf

Refer to UF_DRF_set_cyl_dim for documentation.

setCylinder(NXObject) - Method in interface nxopen.cam.ProbeCalibrateStylusMoveBuilder

License requirements: None.

setCylinder(NXObject) - Method in interface nxopen.cam.ProbeInspectBorebossMoveBuilder

License requirements: None.

setCylinderAxialElementSizeOption(MeshControlBuilder.CylinderAxialElementSizeType) - Method in interface nxopen.cae.MeshControlBuilder

License requirements: None.

setCylinderAxialNumElements(int) - Method in interface nxopen.cae.MeshControlBuilder

License requirements: None.

setCylinderCircleFitMode(InspectionMethodBuilder.CylinderFittingTypes) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setCylinderCircularNumElements(int) - Method in interface nxopen.cae.MeshControlBuilder

License requirements: None.

setCylinderCircularNumPerQuarter(int) - Method in interface nxopen.cae.MeshControlBuilder

License requirements: None.

setCylinderCircularSizeOption(MeshControlBuilder.CylinderCircularSizeType) - Method in interface nxopen.cae.MeshControlBuilder

License requirements: None.

setCylinderColor(double[]) - Method in interface nxopen.facet.DetectPrimitivesBuilder

Sets the cylinder color
License requirements: None.

setCylinderDensitySize(int) - Method in interface nxopen.cae.MeshControlDisplayOptionsBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setCylinderFitting(InspectionMethodBuilder.CylinderFittingTypes) - Method in interface nxopen.cam.InspectionAnalyzeBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setCylinders(HydraulicCylinder[]) - Method in interface nxopen.mechatronics.HydraulicValveBuilder

the Cylinders.

setCylinders(PneumaticCylinder[]) - Method in interface nxopen.mechatronics.PneumaticValveBuilder

the Cylinders.

setCylinderType(StockSizeBuilder.Cylinder) - Method in interface nxopen.tooling.StockSizeBuilder

Deprecated.

Deprecated in NX10.0.0. This functionality is no longer supported.

setCylindricalBushing(Tag, UFMotion.CylindricalBushing) - Method in interface nxopen.uf.UFMotion

Refer to UF_MOTION_set_cylindrical_bushing for documentation.

setCylindricalExtension(double) - Method in interface nxopen.annotations.AutomaticCenterlineBuilder

License requirements: drafting ("DRAFTING")
.

setCylTolerance(double) - Method in interface nxopen.cam.ProbeToleranceParametersBuilder

License requirements: None.

setD(String) - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder

License requirements: drafting ("DRAFTING")
.

setD(String) - Method in interface nxopen.annotations.SurfaceFinishBuilder

License requirements: None.

setDamper(Tag, UFMotion.SpringDamper) - Method in interface nxopen.uf.UFMotion

Refer to UF_MOTION_set_damper for documentation.

setDamperName(String) - Method in interface nxopen.motion.SpringBuilder

License requirements: mechanisms ("MECHANISMS")
.

setDamping(double) - Method in interface nxopen.cae.AfuOrdinateHeaderInfo

Sets the damping value
License requirements: nx_ftk ("NX Advanced Graphing")
.

setDampingCoefficient(double) - Method in interface nxopen.motion.PMDCMotorBuilder

Sets the damping coefficient
License requirements: nx_motion_motor ("NX Motion Motor")
.

setDampingFactor(double) - Method in interface nxopen.cae.LaminateDampingFactorBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setDampingFactors(double, double) - Method in interface nxopen.cae.responsesimulation.ModalProperties

Set damping factors for all normal modes
License requirements: nx_response_anlys ("NX Response Analysis")
.

setDampingFactors(double, double) - Method in interface nxopen.motion.FlexBody

Sets damping factors for all normal modes
License requirements: mechanisms ("MECHANISMS")
.

setDampingRatio(double) - Method in interface nxopen.cae.PreTestExciterConfigBuilder

License requirements: nx_correl_base ("FE Correlation")
.

setDarkColor(double[]) - Method in interface nxopen.geometricanalysis.HighlightLinesAnalysisBuilder

Sets the color of the dark (unlit) areas of reflection contours
License requirements: studio_analyze ("STUDIO ANALYZE")
.

setDashSize(double) - Method in interface nxopen.preferences.PartVisualizationLine

Sets the dash size.

setData(int, int, int, int, double, int, double, int) - Method in interface nxopen.cae.AfuMathFastRMSInfo

Set the Fast RMS Parameter Information
License requirements: nx_ftk ("NX Advanced Graphing")
.

setData(String, HumanReachZone.MethodType, double, double, double, double, double, double, String, Human, int, boolean) - Method in interface nxopen.HumanReachZone

Set reach zone data
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setDatabase(HumanData.DatabaseType) - Method in interface nxopen.features.HumanBuilder

Sets database for human
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setDatabaseObjects(DatabaseObject[]) - Method in interface nxopen.pdm.DatabaseObjects

This API sets the collection of DatabaseObject .

setDataComponent(DirectionDataComponent) - Method in interface nxopen.cae.responsesimulation.ElementalFunctionEvaluationSettingBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setDataComponent(DirectionDataComponent) - Method in interface nxopen.cae.responsesimulation.NodalFunctionEvaluationSettingBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setDataComponent(DirectionDataComponent) - Method in interface nxopen.cae.responsesimulation.StrainGageEvaluationSettingBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setDataComponents(DirectionDataComponent[]) - Method in interface nxopen.cae.responsesimulation.PrlResultsEvaluationSettingBuilder

Sets the direction data components.

setDataDefinition(PostScenarioDataDefinition) - Method in interface nxopen.cae.PostScenarioBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDataDefinition(BaseDataLoadingWheelBuilder.DataDefinitionOptions) - Method in interface nxopen.features.vehicledesign.BaseDataLoadingBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setDataDefinition(BaseDataLoadingWheelBuilder.DataDefinitionOptions) - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setDataFile(String) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder

License requirements: None.

setDataFormat(int) - Method in interface nxopen.cae.AfuOrdinateHeaderInfo

Sets the data format
License requirements: nx_ftk ("NX Advanced Graphing")
.

setDatasetName(String) - Method in interface nxopen.features.vehicledesign.BaseDataImportExportBuilder

License requirements: gateway ("UG GATEWAY")
.

setDatasetName(String) - Method in interface nxopen.PrintPDFBuilder

License requirements: None.

setDatasetNames(String[]) - Method in interface nxopen.CGMBuilder

Sets all the dataset names to be used when creating CGMs in a Teamcenter environment.

setDataSets(int) - Method in interface nxopen.features.shipdesign.ReadDataSetBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setDatasetType(String) - Method in interface nxopen.CGMBuilder

License requirements: None.

setDatasetType(String) - Method in interface nxopen.PrintPDFBuilder

License requirements: None.

setDataSource(IPostScenarioDataSource) - Method in interface nxopen.cae.PostScenarioParameters

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDataSource(String) - Method in interface nxopen.features.shipdesign.ManufacturingStockBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setDataSource(Parser.DataSourceTypes) - Method in interface nxopen.validate.Parser

License requirements: None.

setDataSourceType(ManufacturingStockBuilder.StockDataSourceType) - Method in interface nxopen.features.shipdesign.ManufacturingStockBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setDataType(AttributePropertiesBaseBuilder.DataTypeOptions) - Method in interface nxopen.AttributePropertiesBaseBuilder

License requirements: None.

setDataType(AttributePropertiesBaseBuilder.DataTypeOptions) - Method in interface nxopen.AttributeTemplatesBuilder

License requirements: None.

setDataType(DriverMotionsData.DriverDataType) - Method in interface nxopen.motion.DriverMotionsData

License requirements: mechanisms ("MECHANISMS")
.

setDataType(ExpressionFunctionBuilder.Type) - Method in interface nxopen.motion.ExpressionFunctionBuilder

License requirements: mechanisms ("MECHANISMS")
.

setDataType(LsdynaKfileGeneratorBuilder.MeshDataType) - Method in interface nxopen.tooling.LsdynaKfileGeneratorBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setDataTypeOption(RequirementBuilder.DataTypeOptions) - Method in interface nxopen.validate.RequirementBuilder

License requirements: None.

setDateFormatType(TableCellStyleBuilder.DateFormatTypes) - Method in interface nxopen.annotations.TableCellStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDateGroupMethodOfRule(Rule, Classifier.DateGroupMethodOption) - Method in interface nxopen.visualreporting.VisualReportBuilder

Sets the Classifier.DateGroupMethodOption of the active Classifier in the given Rule .

setDateTimePropertyValue(String, int, int, int, int, int, int, int) - Method in interface nxopen.cae.PropertyTable

Returns the date time value of the property
License requirements: None.

setDatumCsysScaling(Tag, boolean) - Method in interface nxopen.uf.UFModlFeatures

Refer to UF_MODL_set_datum_csys_scaling for documentation.

setDatumCsysVisibility(Tag, boolean) - Method in interface nxopen.uf.UFModlFeatures

Refer to UF_MODL_set_datum_csys_visibility for documentation.

setDatumExtendedText(String) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

License requirements: None.

setDatumExtendedTextToggle(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

License requirements: None.

setDatumExtendedTextType(SearchModelViewBuilder.TextComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

License requirements: None.

setDatumFeatureSymbolCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use TrackDrawingChangesReportFilterBuilder.setReportFilterStatus(nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter, boolean) instead.

setDatumFeatureSymbolLabel(String) - Method in interface nxopen.annotations.SearchCriteriaDatumFeatureSymbolBuilder

License requirements: None.

setDatumFeatureSymbolLeaderTerminatorCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use TrackDrawingChangesReportFilterBuilder.setReportFilterStatus(nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter, boolean) instead.

setDatumFeatureSymbolOriginCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use TrackDrawingChangesReportFilterBuilder.setReportFilterStatus(nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter, boolean) instead.

setDatumFeatureSymbolRetainedStatusCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use TrackDrawingChangesReportFilterBuilder.setReportFilterStatus(nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter, boolean) instead.

setDatumFeatureSymbolTextCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use TrackDrawingChangesReportFilterBuilder.setReportFilterStatus(nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter, boolean) instead.

setDatumFirstReferenceDirection(WeldDatumControlDirection) - Method in interface nxopen.weld.WeldPointBuilder

Sets the datum reference direction type.

setDatumIdentifier(Tag, UFGdt.DatumIdentifier) - Method in interface nxopen.uf.UFGdt

Refer to UF_GDT_set_datum_identifier for documentation.

setDatumIdLowerRange(int) - Method in interface nxopen.weld.WeldPreferenceBuilder

License requirements: ugweld ("UG WELD")
.

setDatumIdUpperRange(int) - Method in interface nxopen.weld.WeldPreferenceBuilder

License requirements: ugweld ("UG WELD")
.

setDatumKeywords(Tag, int, UFGdt.Keyword[]) - Method in interface nxopen.uf.UFGdt

Refer to UF_GDT_set_datum_keywords for documentation.

setDatumLabel(String) - Method in interface nxopen.annotations.DatumReference

Sets the datum label
License requirements: None.

setDatumLabel(String) - Method in interface nxopen.annotations.DatumTargetData

Sets the datum label.

setDatumLabel(String) - Method in interface nxopen.annotations.IDatumTarget

Sets the datum target label.

setDatumLabel(String) - Method in interface nxopen.annotations.PmiPreferences

Sets the initial letter for datum labels
License requirements: None.

setDatumLabel(Tag, String) - Method in interface nxopen.uf.UFGdt

Refer to UF_GDT_set_datum_label for documentation.

setDatumLengthPastArrow(double) - Method in interface nxopen.annotations.LineAndArrowPreferences

Sets the datum extension line past the arrow distance
License requirements: None.

setDatumLengthPastArrow(double) - Method in interface nxopen.annotations.LineArrowStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDatumMajorDirection(WeldDatumControlDirection) - Method in interface nxopen.weld.WeldPointBuilder

Sets the datum major direction type.

setDatumMCMToggle(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

License requirements: None.

setDatumMCMType(SearchCriteriaFeatureControlFrameBuilder.PrimaryDatumMCMOptions) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

License requirements: None.

setDatumMovable(SearchCriteriaDatumTargetBuilder.DatumTargetMovableOptions) - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder

License requirements: None.

setDatumMultiple(Tag, UFGdt.MultipleDatum) - Method in interface nxopen.uf.UFGdt

Refer to UF_GDT_set_datum_multiple for documentation.

setDatumNamePrefix(String) - Method in interface nxopen.weld.WeldPreferenceBuilder

License requirements: ugweld ("UG WELD")
.

setDatumObjectColor(NXColor) - Method in interface nxopen.weld.WeldPreferenceBuilder

License requirements: ugweld ("UG WELD")
.

setDatumObjectLayer(int) - Method in interface nxopen.weld.WeldPreferenceBuilder

License requirements: ugweld ("UG WELD")
.

setDatumOnDotTerminatedArrowhead(LeaderData.ArrowheadType) - Method in interface nxopen.annotations.LeaderData

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDatumOnDotTerminatedEndPoint(Point3d) - Method in interface nxopen.annotations.LeaderData

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDatumOnDotTerminatedStartPoint(Point3d) - Method in interface nxopen.annotations.LeaderData

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDatumPartNumber(String) - Method in interface nxopen.weld.WeldPreferenceBuilder

License requirements: ugweld ("UG WELD")
.

setDatumPlane(Plane) - Method in interface nxopen.features.sheetmetal.GussetBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setDatumPlaneFitting(InspectionMethodBuilder.DatumPlaneFittingTypes) - Method in interface nxopen.cam.InspectionAnalyzeBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDatumPlaneFittingMode(InspectionMethodBuilder.DatumPlaneFittingTypes) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDatumPlaneLayer(int) - Method in interface nxopen.features.SectionInertiaAnalysisBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDatumPlanes(DatumPlane[]) - Method in interface nxopen.display.DatumPlaneGridBuilder

Set the list of datum planes.

setDatumPlanes(boolean) - Method in interface nxopen.features.SectionInertiaAnalysisBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDatumReferences(Tag, int, int, UFGdt.DatumReference) - Method in interface nxopen.uf.UFGdt

Refer to UF_GDT_set_datum_references for documentation.

setDatumSecondReferenceDirection(WeldDatumControlDirection) - Method in interface nxopen.weld.WeldPointBuilder

Sets the datum reference direction type.

setDatumSelectedPrefix(String[]) - Method in interface nxopen.weld.WeldPreferenceBuilder

The datum selected prefix
License requirements: ugweld ("UG WELD")
.

setDatumSelectedSuffix(String[]) - Method in interface nxopen.weld.WeldPreferenceBuilder

Selected datum suffix
License requirements: ugweld ("UG WELD")
.

setDatumTargetCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use TrackDrawingChangesReportFilterBuilder.setReportFilterStatus(nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter, boolean) instead.

setDatumTargetLabelText(String) - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder

License requirements: None.

setDatumTargetLeaderTerminatorCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use TrackDrawingChangesReportFilterBuilder.setReportFilterStatus(nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter, boolean) instead.

setDatumTargetOriginCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use TrackDrawingChangesReportFilterBuilder.setReportFilterStatus(nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter, boolean) instead.

setDatumTargetRetainedStatusCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use TrackDrawingChangesReportFilterBuilder.setReportFilterStatus(nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter, boolean) instead.

setDatumTargetStandard(DatumTargetBuilder.StandardTypes) - Method in interface nxopen.annotations.DatumTargetBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setDatumTargetTextCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use TrackDrawingChangesReportFilterBuilder.setReportFilterStatus(nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter, boolean) instead.

setDatumTargetType(SearchCriteriaDatumTargetBuilder.DatumTargetTypes) - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder

License requirements: None.

setDatumText(String) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

License requirements: None.

setDatumToggle(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

License requirements: None.

setDay(DateItemBuilder.DayOfMonth) - Method in interface nxopen.DateItemBuilder

License requirements: None.

setDaylightBottomLeft(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setDaylightBottomLeft(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarWizardBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setDaylightBottomLeft(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setDaylightBottomLeft(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarWizardBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setDaylightBottomLeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setDaylightBottomLeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setDaylightBottomRight(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setDaylightBottomRight(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarWizardBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setDaylightBottomRight(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setDaylightBottomRight(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarWizardBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setDaylightBottomRightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setDaylightBottomRightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setDbDecades(int) - Method in interface nxopen.cae.xyplot.AxisStyleSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setDbEdgeDistance(double) - Method in interface nxopen.tooling.DieBaseBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setDbRef(double) - Method in interface nxopen.cae.xyplot.AxisStyleSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setDBReference(double) - Method in interface nxopen.cae.ResultParameters

Set the dB Reference value
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDbRefPointX(double) - Method in interface nxopen.tooling.DieBaseBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setDbRefPointY(double) - Method in interface nxopen.tooling.DieBaseBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setDBscale(Result.DbScale) - Method in interface nxopen.cae.ResultParameters

Set the dB Scale value
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDbScale(AxisDBScale) - Method in interface nxopen.cae.xyplot.AxisStyleSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setDBScaling(int) - Method in interface nxopen.cae.ResultParameters

Set the dB Scaling on or off
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDdamCoefficient(RSEventSolverParameters.DdamCoefficientType, double) - Method in interface nxopen.cae.responsesimulation.RSEventSolverParameters

Sets the DDAM coefficient value of the specified type
License requirements: nx_response_anlys ("NX Response Analysis")
.

setDdamCoefficientA(double) - Method in interface nxopen.cae.responsesimulation.RSEventSolverParameters

License requirements: nx_response_anlys ("NX Response Analysis")
.

setDdamCoefficientV(double) - Method in interface nxopen.cae.responsesimulation.RSEventSolverParameters

License requirements: nx_response_anlys ("NX Response Analysis")
.

setDeactivate(boolean) - Method in interface nxopen.geometricutilities.PartModuleOutputBuilder

Deprecated.

Deprecated in NX9.0.0. Please use PartModule.activate(boolean) instead.

setDebugDumpEnabled(boolean) - Method in interface nxopen.pdm.SmartSaveBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setDebugFlag(boolean) - Method in interface nxopen.RuleManager

License requirements: gateway ("UG GATEWAY")
.

setDecalName(String) - Method in interface nxopen.display.DecalBuilder

License requirements: None.

setDecalReflectivity(double) - Method in interface nxopen.display.DecalBuilder

License requirements: None.

setDecimalPlace(int) - Method in interface nxopen.annotations.CoordinateNoteBuilder

License requirements: None.

setDecimalPlaces(int) - Method in interface nxopen.annotations.HoleTableSettingsFormatBuilder

License requirements: drafting ("DRAFTING")
.

setDecimalPlaces(int) - Method in interface nxopen.annotations.ShipDraftingFramebarGeneralBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setDecimalPlaces(int) - Method in interface nxopen.tooling.ForceCalculationBuilder

License requirements: None.

setDecimalPointCharacter(DecimalPointCharacter) - Method in interface nxopen.annotations.UnitsFormatPreferences

Sets the decimal point character
License requirements: None.

setDecimalPointCharacter(DecimalPointCharacter) - Method in interface nxopen.annotations.UnitsStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDecimalPrecision(int) - Method in interface nxopen.uistyler.RealScale

Sets decimal precision
License requirements: None.

setDecimals(RoundPointBuilder.Output) - Method in interface nxopen.cam.RoundPointBuilder

License requirements: None.

setDecimateMethod(DecimateFacetBodyBuilder.DecimateMethodType) - Method in interface nxopen.facet.DecimateFacetBodyBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setDecimationOrder(int) - Method in interface nxopen.cae.DurabilityDataControlBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setDecimationOrder(int) - Method in interface nxopen.cae.responsesimulation.ResponseResultsEvaluationSettingBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setDecisionAction(OverrideBuilder.DecisionActions) - Method in interface nxopen.validate.OverrideBuilder

License requirements: ug_checkmate ("UG Check Mate")
.

setDecisionComments(String[]) - Method in interface nxopen.validate.OverrideBuilder

Sets the decision comments The decision comments is optional.

setDecisionUser(String) - Method in interface nxopen.validate.OverrideBuilder

License requirements: ug_checkmate ("UG Check Mate")
.

setDeckEdgeOffset(double) - Method in interface nxopen.tooling.DieDesDrawDieBuilder

License requirements: ug_die_design ("Die Design")
.

setDeckEnum(ShipIntersectionsBuilder.Type) - Method in interface nxopen.features.shipdesign.ShipIntersectionsBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setDeckFlangeThickness(double) - Method in interface nxopen.tooling.DieDesDrawDieBuilder

License requirements: ug_die_design ("Die Design")
.

setDeckingMaterial(PlatformEquipmentBuilder.DeckingMaterialTypeAPI) - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setDeckName(String) - Method in interface nxopen.features.shipdesign.DeckListItemBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setDecks(boolean) - Method in interface nxopen.annotations.BaseFrameBarBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setDecksLabelColor(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setDecksLabelFont(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setDecksLabelItalicized(boolean) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setDecksLabelName(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setDecksLabelWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setDecksTicColor(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setDecksTicDisplay(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setDecksTicFont(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setDecksTicLength(double) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setDecksTicWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setDeckSupportEnum(PlatformEquipmentBuilder.DeckSupportTypeAPI) - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setDeckThickness(double) - Method in interface nxopen.die.DrawDiePunchSectionBuilder

License requirements: ug_die_design ("Die Design")
.

setDeckThickness(double) - Method in interface nxopen.tooling.DieDesDrawDieBuilder

License requirements: ug_die_design ("Die Design")
.

setDeckThickness(double) - Method in interface nxopen.tooling.DieDesDrawPunchBuilder

License requirements: ug_die_design ("Die Design")
.

setDeEmphasisBlendColor(int) - Method in interface nxopen.preferences.PartVisualizationColorSetting

Deprecated.

Deprecated in NX8.5.0. Use Preferences.PartVisualizationEmphasis#setWireframeBlendOptions instead.

setDeEmphasisBlendPercentage(int) - Method in interface nxopen.preferences.PartVisualizationColorSetting

Deprecated.

Deprecated in NX8.5.0. Use Preferences.PartVisualizationEmphasis#setWireframeBlendOptions instead.

setDefAction(UFClone.Action) - Method in interface nxopen.uf.UFClone

Refer to UF_CLONE_set_def_action for documentation.

setDefAssocFileCopy(boolean) - Method in interface nxopen.uf.UFClone

Refer to UF_CLONE_set_def_assoc_file_copy for documentation.

setDefAssociative(boolean) - Method in interface nxopen.tooling.ProfileSplitBuilder

License requirements: None.

setDefault(Arrangement) - Method in interface nxopen.assemblies.ComponentAssembly

Set the default Arrangement for the given ComponentAssembly .

setDefault(int) - Method in interface nxopen.uistyler.ToolPalette

Indicates that this dialog item should override the accelerator on the second mouse button, which normally accelerates to the OK button.

setDefaultAction(PartOperationImportBuilder.ExistingPartAction) - Method in interface nxopen.pdm.PartOperationImportBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setDefaultAction() - Method in interface nxopen.uistyler.ButtonLayout

Sets default action
License requirements: None.

setDefaultAction() - Method in interface nxopen.uistyler.OptionToggle

Sets default action
License requirements: None.

setDefaultAction() - Method in interface nxopen.uistyler.PushButton

Sets default action
License requirements: None.

setDefaultAction() - Method in interface nxopen.uistyler.RadioBox

Set default action
License requirements: None.

setDefaultAction() - Method in interface nxopen.uistyler.Toggle

Indicates that this dialog item should override the accelerator on the second mouse button, which normally accelerates to the OK button.

setDefaultArcNamePrefix(String) - Method in interface nxopen.preferences.SessionSketch

Sets the default arc name prefix
License requirements: None.

setDefaultArrangement(Tag) - Method in interface nxopen.uf.UFAssem

Refer to UF_ASSEM_set_default_arrangement for documentation.

setDefaultAttribute(String, double) - Method in interface nxopen.cam.fbm.FeatureGeometry

Sets a default attribute value
License requirements: cam_base ("CAM BASE")
.

setDefaultAttribute(String, String) - Method in interface nxopen.cam.fbm.FeatureGeometry

Sets a default attribute value
License requirements: cam_base ("CAM BASE")
.

setDefaultAttribute(String, int) - Method in interface nxopen.cam.fbm.FeatureGeometry

Sets a default attribute value
License requirements: cam_base ("CAM BASE")
.

setDefaultAttribute(String, boolean) - Method in interface nxopen.cam.fbm.FeatureGeometry

Sets a default attribute value
License requirements: cam_base ("CAM BASE")
.

setDefaultBodyRulesAsString(String) - Method in interface nxopen.blockstyler.BodyCollector

License requirements: None.

setDefaultBoolean(AttributeTemplatesBuilder.DefaultBooleanOptions) - Method in interface nxopen.AttributeTemplatesBuilder

License requirements: None.

setDefaultCellPrefs(UFTabnot.CellPrefs) - Method in interface nxopen.uf.UFTabnot

Refer to UF_TABNOT_set_default_cell_prefs for documentation.

setDefaultClearanceZone(Expression) - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder

Set the expression as the default Clearance Zone.

setDefaultClearZone(Tag, Tag) - Method in interface nxopen.uf.UFClear

Deprecated.

The equivalent Open C method has retired

setDefaultColumnWidth(int) - Method in interface nxopen.blockstyler.SetList

License requirements: None.

setDefaultConicNamePrefix(String) - Method in interface nxopen.preferences.SessionSketch

Sets the default conic name prefix
License requirements: None.

setDefaultCorner(RoutingPath.DefaultCornerType) - Method in interface nxopen.preferences.RoutingPath

License requirements: routing_base ("Routing Basic")
.

setDefaultCurveRulesAsString(String) - Method in interface nxopen.blockstyler.CurveCollector

License requirements: None.

setDefaultCurveRulesAsString(String) - Method in interface nxopen.blockstyler.SectionBuilder

License requirements: None.

setDefaultCurveRulesAsString(String) - Method in interface nxopen.blockstyler.SuperPoint

License requirements: None.

setDefaultCurveRulesAsString(String) - Method in interface nxopen.blockstyler.SuperSection

License requirements: None.

setDefaultDensity(double, UFModl.DensityUnits) - Method in interface nxopen.uf.UFModeling

Refer to UF_MODL_set_default_density for documentation.

setDefaultDescription(String) - Method in interface nxopen.pdm.PartOperationImportBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setDefaultDestinationFolder(String) - Method in interface nxopen.pdm.ObjectCreateBuilder

License requirements: None.

setDefaultDestinationFolder(String) - Method in interface nxopen.pdm.PartOperationBuilder

License requirements: None.

setDefaultDirection() - Method in interface nxopen.features.OvercrownBuilder

The default direction.

setDefaultDrawDirection() - Method in interface nxopen.die.DrawBeadBuilder

Set the default draw direction to the -Z direction of the work coordinate system.

setDefaultEdgeContinuity(FillHoleBuilder.ContinuityTypes) - Method in interface nxopen.features.FillHoleBuilder

License requirements: nx_freeform_1 ("basic freeform modeling"), solid_modeling ("SOLIDS MODELING")
.

setDefaultElbowNode(String) - Method in interface nxopen.preferences.RoutingPart

Sets the node in the part library to use for searching for the default elbow to place during create path.

setDefaultEntry(ContextMenuEntry) - Method in interface nxopen.menubar.ContextMenu

Makes a specified menu entry the default for the menu.

setDefaultEnvNx(String) - Method in interface nxopen.uf.UFSfl

Refer to UF_SFL_set_default_env_nx for documentation.

setDefaultFaceRulesAsString(String) - Method in interface nxopen.blockstyler.FaceCollector

License requirements: None.

setDefaultFolder(String) - Method in interface nxopen.pdm.PdmSession

Sets default folder.

setDefaultFolder(Tag) - Method in interface nxopen.uf.UFUgmgr

Refer to UF_UGMGR_set_default_folder for documentation.

setDefaultFolderForPart() - Method in interface nxopen.pdm.PdmPart

Set default folder for the part in which it is to be saved
License requirements: None.

setDefaultHarnessName(String) - Method in interface nxopen.preferences.RoutingElectrical

Sets the default harness name
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setDefaultInteger(int) - Method in interface nxopen.AttributeTemplatesBuilder

License requirements: None.

setDefaultItemType(String) - Method in interface nxopen.pdm.PartOperationImportBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setDefaultJumperLength(String) - Method in interface nxopen.preferences.RoutingElectrical

Sets the default length of a jumper wire.

setDefaultLayupOffset(LaminateLayupOffset) - Method in interface nxopen.cae.LaminateGlobalLayupMgr

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setDefaultLineNamePrefix(String) - Method in interface nxopen.preferences.SessionSketch

Sets the default line name prefix
License requirements: None.

setDefaultMaterialOrientation(int) - Method in interface nxopen.cae.LaminateGlobalLayupMgr

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setDefaultName(String) - Method in interface nxopen.pdm.PartOperationImportBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setDefaultNumber(double) - Method in interface nxopen.AttributeTemplatesBuilder

License requirements: None.

setDefaultOperationType(InspectionMethodBuilder.OperationTypes) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDefaultOwningGroup(String) - Method in interface nxopen.pdm.PartOperationImportBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setDefaultOwningUser(String) - Method in interface nxopen.pdm.PartOperationImportBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setDefaultParameters(UFFacet.Parameters) - Method in interface nxopen.uf.UFFacet

Refer to UF_FACET_set_default_parameters for documentation.

setDefaultPlanarFaces(NXObject, int) - Method in interface nxopen.tooling.FastenerAssy

Sets the default planar face for the hole in the fastener assembly
License requirements: None.

setDefaultPlane(PmiDefaultPlane) - Method in interface nxopen.annotations.PmiPreferences

Sets the default annotation plane for PMI symbols
License requirements: None.

setDefaultPlane() - Method in interface nxopen.display.DynamicSectionBuilder

Set current section plane to its default definition.

setDefaultPrefs(UFPlist.Prefs) - Method in interface nxopen.uf.UFPlist

Refer to UF_PLIST_set_default_prefs for documentation.

setDefaultProjectInformation(String[], Session.ProjectAssignmentState[]) - Method in interface nxopen.pdm.PartOperationImportBuilder

Set default projects information
License requirements: assemblies ("ASSEMBLIES MODULE")
.

setDefaultReferenceSets(String[]) - Method in interface nxopen.LoadOptions

Sets the list of reference sets to be looked for, in order, when an assembly is loaded.

setDefaultRefSets(int, String[]) - Method in interface nxopen.uf.UFAssem

Refer to UF_ASSEM_set_default_ref_sets for documentation.

setDefaultRegionStartType(NcmSubopBuilder.DefaultRegionStartTypes) - Method in interface nxopen.cam.NcmSubopBuilder

License requirements: cam_base ("CAM BASE")
.

setDefaults() - Method in interface nxopen.display.DynamicSectionBuilder

Set current section to the default values.

setDefaults() - Method in interface nxopen.preferences.ViewSection

Set current view section preferences to the default customer default values.

setDefaultScallopTypes(String) - Method in interface nxopen.features.shipdesign.ProfileCutoutBuilder

Set the default scallop types for the profile cutout builder.

setDefaultSectionPrefs(UFTabnot.SectionPrefs) - Method in interface nxopen.uf.UFTabnot

Refer to UF_TABNOT_set_default_section_prefs for documentation.

setDefaultSketchNamePrefix(String) - Method in interface nxopen.preferences.SessionSketch

Sets the default sketch name prefix
License requirements: None.

setDefaultSplineNamePrefix(String) - Method in interface nxopen.preferences.SessionSketch

Sets the default spline name prefix
License requirements: None.

setDefaultStandardTextFont(String, VisualizationFonts.StyleType, int) - Method in interface nxopen.preferences.VisualizationFonts

Modifies settings for the default standard text font
License requirements: None.

setDefaultStlParams() - Method in interface nxopen.uf.UFStd

Refer to UF_STD_set_default_stl_params for documentation.

setDefaultStock(CharacteristicList, CharacteristicList) - Method in interface nxopen.preferences.RoutingStock

Sets the current default stock to assign when creating paths.

setDefaultStockStyle(StockStyle) - Method in interface nxopen.preferences.RoutingStock

Sets the default stock style
License requirements: routing_base ("Routing Basic")
.

setDefaultString(String) - Method in interface nxopen.AttributeTemplatesBuilder

License requirements: None.

setDefaultTemperatureOption(boolean) - Method in interface nxopen.cae.SolidPropertyCheckBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setDefaultText(String) - Method in interface nxopen.annotations.TableColumnBuilder

License requirements: drafting ("DRAFTING")
.

setDefaultThickness(String) - Method in interface nxopen.features.ShellBuilder

Sets the default thickness for the shelled body.

setDefaultThicknessFlip(boolean) - Method in interface nxopen.features.ShellBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDefaultToPoint(Point3d) - Method in interface nxopen.drafting.CutCopyPasteBuilder

Set the default to point.

setDefaultUpdateFailureAction(Update.FailureOption) - Method in interface nxopen.Update

Action to take when an object fails to update even with specific action set to that object.

setDefaultValue(double) - Method in interface nxopen.report.DoubleArgument

License requirements: None.

setDefaultValue(int) - Method in interface nxopen.report.EnumerationArgument

License requirements: None.

setDefaultValue(int) - Method in interface nxopen.report.IntegerArgument

License requirements: None.

setDefaultValue(String) - Method in interface nxopen.report.StringArgument

License requirements: None.

setDefaultVertexNamePrefix(String) - Method in interface nxopen.preferences.SessionSketch

Sets the default vertex name prefix
License requirements: None.

setDefaultVrmlParams() - Method in interface nxopen.uf.UFStd

Refer to UF_STD_set_default_vrml_params for documentation.

setDefCi(UFClone.CheckinData) - Method in interface nxopen.uf.UFClone

Refer to UF_CLONE_set_def_ci for documentation.

setDefCiCommentChecking(boolean, String) - Method in interface nxopen.uf.UFClone

Refer to UF_CLONE_set_def_ci_comment_checking for documentation.

setDefCo(UFClone.CheckoutData) - Method in interface nxopen.uf.UFClone

Refer to UF_CLONE_set_def_co for documentation.

setDefCreColor(int) - Method in interface nxopen.uf.UFObj

Refer to UF_OBJ_set_def_cre_color for documentation.

setDefCreLineFont(int) - Method in interface nxopen.uf.UFObj

Refer to UF_OBJ_set_def_cre_line_font for documentation.

setDefCreWidth(int) - Method in interface nxopen.uf.UFObj

Refer to UF_OBJ_set_def_cre_width for documentation.

setDefDirectory(String) - Method in interface nxopen.uf.UFClone

Refer to UF_CLONE_set_def_directory for documentation.

setDeferCurveUpdate(boolean) - Method in interface nxopen.display.DynamicSectionBuilder

License requirements: None.

setDeferCuttingStatus(boolean) - Method in interface nxopen.cam.PlanarOperationBuilder

License requirements: cam_base ("CAM BASE")
.

setDefFolder(String) - Method in interface nxopen.uf.UFClone

Refer to UF_CLONE_set_def_folder for documentation.

setDefGroup(String) - Method in interface nxopen.uf.UFClone

Refer to UF_CLONE_set_def_group for documentation.

setDefineBy(RenameAndExportComponentBuilder.DefinitionType) - Method in interface nxopen.tooling.RenameAndExportComponentBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setDefineByPathOption(boolean) - Method in interface nxopen.cae.PostGraphAlongPathBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDefineByViewOrHolesEnum(HoleManufacturingNoteBuilder.DefineByViewOrHoles) - Method in interface nxopen.tooling.HoleManufacturingNoteBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setDefineConnectVector(boolean) - Method in interface nxopen.tooling.CoolingConnectBuilder

License requirements: None.

setDefinedBy(SpringbackCompensationBuilder.DefinedByType) - Method in interface nxopen.die.SpringbackCompensationBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR nx_freeform_2 ("advanced freeform modeling")
.

setDefineGlobalSizeToggle(boolean) - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setDefineSharedBodyInput(boolean) - Method in interface nxopen.geometricutilities.PartModuleInputBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDefineStartPoint(boolean) - Method in interface nxopen.tooling.CoolingConnectBuilder

License requirements: None.

setDefineStep(MWDefineSheetsBuilder.DefineStepType) - Method in interface nxopen.tooling.MWDefineSheetsBuilder

License requirements: None.

setDefiningComponents(Component[]) - Method in interface nxopen.positioning.ComponentConstraintGroup

Sets the defining constraints within the group.

setDefiningConstraints(ComponentConstraint[]) - Method in interface nxopen.positioning.ComponentConstraintGroup

Sets the defining constraints within the group.

setDefiningObjectsAdded(boolean) - Method in interface nxopen.assemblies.CreateNewComponentBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setDefiningPoint(int, Point3d, int) - Method in interface nxopen.features.RapidSurfaceBuilder

Sets a defining point
License requirements: studio_free_form ("STUDIO FREE FORM")
.

setDefinition(TBSGroupDefinition.DefinitionType) - Method in interface nxopen.cae.optimization.TBSGroupDefinition

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setDefinitionMethod(SeamBuilder.DefinitionMethods) - Method in interface nxopen.features.shipdesign.SeamBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setDefinitionMethodOption(RequirementBuilder.DefinitionMethodOptions) - Method in interface nxopen.validate.RequirementBuilder

License requirements: None.

setDefinitionRectangularCorner(Point) - Method in interface nxopen.features.shipdesign.SeamBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setDefinitionRectangularLengthDirection(Direction) - Method in interface nxopen.features.shipdesign.SeamBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setDefinitionRectangularPlane(Plane) - Method in interface nxopen.features.shipdesign.SeamBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setDefinitionReferenceProperties(boolean) - Method in interface nxopen.layout2d.ExportComponentHierarchyBuilder

License requirements: nx_layout ("NX Layout")
.

setDefinitions(String[]) - Method in interface nxopen.cae.FunctionBuilder

Sets definition strings of a math function.

setDefinitions(boolean) - Method in interface nxopen.layout2d.ExportComponentHierarchyBuilder

License requirements: nx_layout ("NX Layout")
.

setDefItemType(String) - Method in interface nxopen.uf.UFClone

Refer to UF_CLONE_set_def_item_type for documentation.

setDefNaming(UFClone.NamingTechnique) - Method in interface nxopen.uf.UFClone

Refer to UF_CLONE_set_def_naming for documentation.

setDefNmCopy(UFClone.CopyNmOpt) - Method in interface nxopen.uf.UFClone

Refer to UF_CLONE_set_def_nm_copy for documentation.

setDefNum(int) - Method in interface nxopen.tooling.ElectrodeCopyBuilder

License requirements: None.

setDeformationDirectionMethod(GlobalShapingBuilder.DirectionMethodType) - Method in interface nxopen.features.GlobalShapingBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDeformationDirectionReverse(boolean) - Method in interface nxopen.features.GlobalShapingBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDeformationDirectionVector(Direction) - Method in interface nxopen.features.GlobalShapingBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDeformationFactor(double) - Method in interface nxopen.die.SpringbackCompensationBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR nx_freeform_2 ("advanced freeform modeling")
.

setDeformationType(Result.DeformationScale) - Method in interface nxopen.cae.DeformationParameters

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDeformationType(GlobalShapingBuilder.DeformationTypeValues) - Method in interface nxopen.features.GlobalShapingBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDefOwner(String) - Method in interface nxopen.uf.UFClone

Refer to UF_CLONE_set_def_owner for documentation.

setDefPdmDesc(String) - Method in interface nxopen.uf.UFClone

Refer to UF_CLONE_set_def_pdm_desc for documentation.

setDefPdmName(String) - Method in interface nxopen.uf.UFClone

Refer to UF_CLONE_set_def_pdm_name for documentation.

setDefStationNum(int) - Method in interface nxopen.tooling.ScrapDesignBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDefValidationOptions(UFClone.ValidationOpts) - Method in interface nxopen.uf.UFClone

Refer to UF_CLONE_set_def_validation_options for documentation.

setDefVector(Direction) - Method in interface nxopen.tooling.ProfileSplitBuilder

License requirements: None.

setDegree(SpringbackCompensationBuilder.DegreeType) - Method in interface nxopen.die.SpringbackCompensationBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR nx_freeform_2 ("advanced freeform modeling")
.

setDegree(int) - Method in interface nxopen.features.FitCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDegree(int) - Method in interface nxopen.features.RapidSurfaceBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setDegree(int) - Method in interface nxopen.features.StudioSplineBuilder

Deprecated.

Deprecated in NX8.0.0. Use StudioSplineBuilderEx instead.

setDegree(int) - Method in interface nxopen.features.StudioSplineBuilderEx

License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setDegree(int) - Method in interface nxopen.geometricutilities.CurveFitData

License requirements: None.

setDegree(int) - Method in interface nxopen.geometricutilities.DegreesAndSegmentsOrPatchesBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setDegree(int) - Method in interface nxopen.geometricutilities.Rebuild

Sets the degree when rebuild type is none.

setDegree(int) - Method in interface nxopen.SketchOffsetBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setDegreeType(Rebuild.DegreeTypes) - Method in interface nxopen.geometricutilities.Rebuild

Sets the degree type when rebuild type is none.

setDelay(int) - Method in interface nxopen.display.SelPref

License requirements: None.

setDelay(int) - Method in interface nxopen.motion.AnimationControl

Sets the animation delay
License requirements: mechanisms ("MECHANISMS")
.

setDelay(int) - Method in interface nxopen.motion.ArticulationControl

License requirements: mechanisms ("MECHANISMS")
.

setDelay(int) - Method in interface nxopen.motion.SpreadsheetRunControl

License requirements: mechanisms ("MECHANISMS")
.

setDelayEvaluation(boolean) - Method in interface nxopen.preferences.SessionSketch

Sets the delay evaluation preference.

setDelayShipManufacturingFeatureUpdate(boolean) - Method in interface nxopen.features.ShipCollection

Sets the delay ship manufacturing feature update flag.

setDelayTime(double) - Method in interface nxopen.motion.SignalChartListItem

Deprecated.

Deprecated in NX8.5.0. Obtain the expression using Motion.SignalChartListItem#delayTimeExpression to query or edit it.

setDelayUpdateOnCreation(boolean) - Method in interface nxopen.drawings.CustomViewSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setDelayUpdateOnCreation(boolean) - Method in interface nxopen.preferences.PartDrafting

Sets the flag indicating whether the newly created views should update immediately even when the view update is delayed.

setDelayViewUpdate(boolean) - Method in interface nxopen.drawings.CustomViewSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setDelayViewUpdate(boolean) - Method in interface nxopen.preferences.PartDrafting

Sets the flag indicating whether to delay update of the drafting views during system initiated drawing updates
License requirements: None.

setDeleteBrokenInterpartLinks(boolean) - Method in interface nxopen.PartCleanup

Sets the option that specifies whether or not to delete all inter-part links where one or more components in that inter-part link have been removed.

setDeleteButtonClicked(boolean) - Method in interface nxopen.tooling.AssemblyDrawingBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setDeleteButtonSensitive(boolean) - Method in interface nxopen.blockstyler.ListBox

License requirements: None.

setDeleteChainsAtStart(boolean) - Method in interface nxopen.sim.SinumerikCaExportBuilder

License requirements: nx_sinumerik_ca ("Sinumerik Collision Avoidance")
.

setDeleteChamferLabel(boolean) - Method in interface nxopen.features.LabelChamferBuilder

License requirements: None.

setDeleteDangling(boolean) - Method in interface nxopen.cae.ElementDeleteBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setDeletedHolesDisplay(HoleTableSettingsFormatBuilder.DeletedHolesDisplayType) - Method in interface nxopen.annotations.HoleTableSettingsFormatBuilder

License requirements: drafting ("DRAFTING")
.

setDeletedList(int[]) - Method in interface nxopen.tooling.EdgePatchBuilder

Set deleted list value.

setDeletedPointsColor(NXColor) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setDeleteDuplicateLights(boolean) - Method in interface nxopen.PartCleanup

Sets the option that specifies whether to delete duplicate light source objects from the part file.

setDeleteHandler(ListBox.DeleteCallback) - Method in interface nxopen.blockstyler.ListBox

Sets the Delete handler.

setDeleteHandler(SetList.DeleteCallback) - Method in interface nxopen.blockstyler.SetList

Sets the Delete handler.

setDeleteHoles(boolean) - Method in interface nxopen.features.ExtractFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setDeleteInvalidAttributes(boolean) - Method in interface nxopen.PartCleanup

Sets the option that specifies whether to delete all invalid user attributes from the part file.

setDeleteLabel(boolean) - Method in interface nxopen.features.LabelNotchBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setDeleteLocationObjects(DesignRuleViolationLocationCollection.DeleteOption) - Method in interface nxopen.routing.DesignRuleViolationLocation

Sets the function returns delete location objects, which is an option for deletion of violation location objects.

setDeleteMaterials(boolean) - Method in interface nxopen.PartCleanup

Sets the option that specifies whether to delete all materials from the part file.

setDeleteMeasurementPoints(boolean) - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDeleteMethod(ReliefDesignBuilder.MethodOfDelete) - Method in interface nxopen.tooling.ReliefDesignBuilder

License requirements: None.

setDeleteOldComponentsToggle(boolean) - Method in interface nxopen.tooling.RenameAndExportComponentBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setDeleteOriginalFeature(boolean) - Method in interface nxopen.features.ReplaceFeatureBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDeleteOrphan(boolean) - Method in interface nxopen.cae.ElementConnectivityBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setDeleteOverstock(boolean) - Method in interface nxopen.preferences.RoutingStock

Sets the delete overstock flag during deletion of last stock covered by the overstock
License requirements: routing_base ("Routing Basic")
.

setDeletePartialBlend(boolean) - Method in interface nxopen.features.DeleteFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setDeletePreviousDiagrams(boolean) - Method in interface nxopen.features.TabNoteCfgBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setDeleteSectionLine(boolean) - Method in interface nxopen.drawings.DraftingView

Set the section line delete option, If false section line will not be deleted with section view
License requirements: drafting ("DRAFTING")
.

setDeleteSource(ObjectSinkBuilder.DeleteSourceType) - Method in interface nxopen.mechatronics.ObjectSinkBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setDeleteSpreadSheetData(boolean) - Method in interface nxopen.PartCleanup

Sets the option that specifies whether to delete all spreadsheets from the part file.

setDeleteState(int, int, boolean) - Method in interface nxopen.geometricutilities.PatternDefinition

Sets the delete state for the instance at the specified indicies.

setDeleteUnusedExpressions(boolean) - Method in interface nxopen.PartCleanup

Sets the option that specifies whether to delete expressions that are not used in the part.

setDeleteUnusedFonts(boolean) - Method in interface nxopen.PartCleanup

Sets the option that specifies whether to remove character fonts that are not used in any drafting text in the current part.

setDeleteUnusedObjects(boolean) - Method in interface nxopen.PartCleanup

Sets the option that specifies whether to delete all extraneous objects from the work part
License requirements: None.

setDeleteVisualEditorData(boolean) - Method in interface nxopen.PartCleanup

Sets the option that specifies whether to delete Visual Editor data from the part file.

setDelimiter(String) - Method in interface nxopen.preferences.PartDrafting

Sets the delimiter
License requirements: None.

setDeltaCamber(double) - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setDeltaEnum(ModlMotion.Delta) - Method in interface nxopen.geometricutilities.ModlMotion

License requirements: None.

setDeltaStaticRadius(double) - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setDeltaToe(double) - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setDeltaX(double) - Method in interface nxopen.cam.DeltaMoveBuilder

License requirements: None.

setDeltaX(double) - Method in interface nxopen.cam.InspectionDeltaMoveBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDeltaX(double) - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design") OR routing_base ("Routing Basic")
.

setDeltaX(double) - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setDeltaX(double) - Method in interface nxopen.geometricutilities.ModlMotion

Deprecated.

Deprecated in NX8.5.0. Obtain the expression using ModlMotion.deltaXc() to query or edit it.

setDeltaXc(double) - Method in interface nxopen.cam.InspectionOperationTransformBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDeltaXc(double) - Method in interface nxopen.cam.LaserLinearMove

License requirements: cam_base ("CAM BASE")
.

setDeltaXc(double) - Method in interface nxopen.cam.OperationTransformBuilder

License requirements: cam_base ("CAM BASE")
.

setDeltaXC(double) - Method in interface nxopen.cam.ToolPathEditorBuilder

License requirements: None.

setDeltaXc(double) - Method in interface nxopen.cam.TurnEngageRetractBuilder

License requirements: cam_base ("CAM BASE")
.

setDeltaXm(double) - Method in interface nxopen.cam.LaserLinearMove

License requirements: cam_base ("CAM BASE")
.

setDeltaY(double) - Method in interface nxopen.cam.DeltaMoveBuilder

License requirements: None.

setDeltaY(double) - Method in interface nxopen.cam.InspectionDeltaMoveBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDeltaY(double) - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design") OR routing_base ("Routing Basic")
.

setDeltaY(double) - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setDeltaY(double) - Method in interface nxopen.geometricutilities.ModlMotion

Deprecated.

Deprecated in NX8.5.0. Obtain the expression using ModlMotion.deltaYc() to query or edit it.

setDeltaYc(double) - Method in interface nxopen.cam.InspectionOperationTransformBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDeltaYc(double) - Method in interface nxopen.cam.LaserLinearMove

License requirements: cam_base ("CAM BASE")
.

setDeltaYc(double) - Method in interface nxopen.cam.OperationTransformBuilder

License requirements: cam_base ("CAM BASE")
.

setDeltaYC(double) - Method in interface nxopen.cam.ToolPathEditorBuilder

License requirements: None.

setDeltaYc(double) - Method in interface nxopen.cam.TurnEngageRetractBuilder

License requirements: cam_base ("CAM BASE")
.

setDeltaYm(double) - Method in interface nxopen.cam.LaserLinearMove

License requirements: cam_base ("CAM BASE")
.

setDeltaZ(double) - Method in interface nxopen.cam.DeltaMoveBuilder

License requirements: None.

setDeltaZ(double) - Method in interface nxopen.cam.InspectionDeltaMoveBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDeltaZ(double) - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design") OR routing_base ("Routing Basic")
.

setDeltaZ(double) - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setDeltaZ(double) - Method in interface nxopen.geometricutilities.ModlMotion

Deprecated.

Deprecated in NX8.5.0. Obtain the expression using ModlMotion.deltaZc() to query or edit it.

setDeltaZc(double) - Method in interface nxopen.cam.InspectionOperationTransformBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDeltaZc(double) - Method in interface nxopen.cam.LaserLinearMove

License requirements: cam_base ("CAM BASE")
.

setDeltaZc(double) - Method in interface nxopen.cam.OperationTransformBuilder

License requirements: cam_base ("CAM BASE")
.

setDeltaZC(double) - Method in interface nxopen.cam.ToolPathEditorBuilder

License requirements: None.

setDeltaZm(double) - Method in interface nxopen.cam.LaserLinearMove

License requirements: cam_base ("CAM BASE")
.

setDenominator(double) - Method in interface nxopen.drawings.ViewScaleBuilder

License requirements: drafting ("DRAFTING")
.

setDenominator(int) - Method in interface nxopen.features.shipdesign.SectionEditorBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setDenseColor(NXColor) - Method in interface nxopen.cae.xyplot.BaseGridLayoutStyleSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setDensity(double) - Method in interface nxopen.Body

Sets the solid density of the body.

setDensity(double) - Method in interface nxopen.geometricanalysis.SolidDensity

License requirements: None.

setDensity(int) - Method in interface nxopen.geometricutilities.CombOptionsBuilder

License requirements: None.

setDensity(double) - Method in interface nxopen.preferences.PartModeling

Sets the density.

setDensityMove(double) - Method in interface nxopen.cae.optimization.TBSTopologySensitivityOptimizationParameters

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setDensityUnit(PartModeling.DensityUnitType) - Method in interface nxopen.preferences.PartModeling

Sets the density unit
License requirements: None.

setDensityUpdateOption(TBSTopologySensitivityOptimizationParameters.DensityUpdate) - Method in interface nxopen.cae.optimization.TBSTopologySensitivityOptimizationParameters

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setDeparture(NXColor) - Method in interface nxopen.cam.PathDisplayColors

License requirements: cam_base ("CAM BASE")
.

setDepartureMethod(NcmTransferBuilder.AppDepMethodTypes) - Method in interface nxopen.cam.NcmTransferBuilder

License requirements: cam_base ("CAM BASE")
.

setDeparturePathMode(TurnAvoidanceDepartureBuilder.DeparturePathModes) - Method in interface nxopen.cam.TurnAvoidanceDepartureBuilder

License requirements: cam_base ("CAM BASE")
.

setDeparturePostCommands(TaggedObject) - Method in interface nxopen.cam.NcmTransferBuilder

License requirements: cam_base ("CAM BASE")
.

setDepartureToolAxis(SmartObject) - Method in interface nxopen.cam.NcmTransferBuilder

License requirements: cam_base ("CAM BASE")
.

setDepartureToolAxisOption(NcmTransferBuilder.AppDepToolAxisOptions) - Method in interface nxopen.cam.NcmTransferBuilder

License requirements: cam_base ("CAM BASE")
.

setDepartureVector(SmartObject) - Method in interface nxopen.cam.NcmTransferBuilder

License requirements: cam_base ("CAM BASE")
.

setDepDispType(DisplayPropertiesBuilder.DepDispTypeEnum) - Method in interface nxopen.fields.DisplayPropertiesBuilder

License requirements: None.

setDepDomColor(DisplayPropertiesBuilder.DepDomColorEnum) - Method in interface nxopen.fields.DisplayPropertiesBuilder

License requirements: None.

setDependentDomainName(String) - Method in interface nxopen.cae.ResultsCombinationBuilder

Set Dependent Domain Name
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDependentDomainName(String) - Method in interface nxopen.cae.ResultsEnvelopeBuilder

Set Dependent Domain Name
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDependentDomainName(String) - Method in interface nxopen.cae.ResultsReductionBuilder

Set Dependent Domain Name
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDependentEdgeDensitySize(int) - Method in interface nxopen.cae.MeshControlDisplayOptionsBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setDependentFileSaveAsOption(PartFromPartBuilder.FileSaveAs) - Method in interface nxopen.pdm.PartFromPartBuilder

Sets the dependent files to save during the save as operation
Deprecated in NX10 for "Save As of master parts" operation.

setDependentFileSaveAsOption(PartOperationBuilder.DependentFileSaveAs) - Method in interface nxopen.pdm.PartOperationBuilder

Deprecated.

Deprecated in NX10.0.0. Use PartOperationCopyBuilder.setDependentFilesToCopyOption(nxopen.pdm.PartOperationCopyBuilder.CopyDependentFiles) instead

setDependentFilesToCopyOption(PartOperationCopyBuilder.CopyDependentFiles) - Method in interface nxopen.pdm.PartOperationCopyBuilder

License requirements: None.

setDependentView(View) - Method in interface nxopen.geometricutilities.ModlMotion

Set the view for view dependent drafting objects
License requirements: None.

setDepLabelValues(DisplayPropertiesBuilder.DepLabelValueEnum) - Method in interface nxopen.fields.DisplayPropertiesBuilder

License requirements: None.

setDepSelColor(NXColor) - Method in interface nxopen.fields.DisplayPropertiesBuilder

License requirements: None.

setDepSymbolSize(double) - Method in interface nxopen.fields.DisplayPropertiesBuilder

License requirements: None.

setDepth(int) - Method in interface nxopen.cae.xyplot.BarStyle3DSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setDepth(double) - Method in interface nxopen.cam.HoleBossSet

License requirements: cam_base ("CAM BASE")
.

setDepth(double) - Method in interface nxopen.cam.ReliefCut

License requirements: cam_base ("CAM BASE")
.

setDepth(double) - Method in interface nxopen.die.HandlingCoreChildBuilder

Sets the depth of the handling core.

setDepth(double) - Method in interface nxopen.die.HandlingCoreParentBuilder

Sets the depth of handling cores.

setDepth(double) - Method in interface nxopen.die.HoleChildBuilder

Sets the depth of the die hole.

setDepth(double) - Method in interface nxopen.die.HoleParentBuilder

Sets the depth of die holes.

setDepth(double) - Method in interface nxopen.die.KeywayChildBuilder

Sets the depth of the keyway.

setDepth(double) - Method in interface nxopen.die.KeywayParentBuilder

Sets the depth of keyways.

setDepth(String) - Method in interface nxopen.die.PierceHoleChildBuilder

License requirements: ug_die_design ("Die Design")
.

setDepth(String) - Method in interface nxopen.die.PierceHoleParentBuilder

License requirements: ug_die_design ("Die Design")
.

setDepth(String) - Method in interface nxopen.features.HoleFeatureBuilder

Sets the depth of the hole.

setDepth(String) - Method in interface nxopen.features.sheetmetal.AeroJoggleBuilder

Set the depth expression.

setDepth(String) - Method in interface nxopen.features.sheetmetal.DimpleBuilder

Deprecated.

Deprecated in NX10.0.0. Use Expression.setRightHandSide(java.lang.String) on the Expression object returned from DimpleBuilder.getDepth() instead.

setDepth(String) - Method in interface nxopen.features.sheetmetal.LouverBuilder

Deprecated.

Deprecated in NX10.0.0. Use Expression.setRightHandSide(java.lang.String) on the Expression object returned from LouverBuilder.depth() instead.

setDepth(String) - Method in interface nxopen.features.sheetmetal.NormalCutoutBuilder

Deprecated.

Deprecated in NX10.0.0. Use Expression.setRightHandSide(java.lang.String) on the Expression object returned from NormalCutoutBuilder.depth() instead.

setDepthAndTipAngle(String, String) - Method in interface nxopen.features.HoleFeatureBuilder

Sets depth and tip angle parameters for the hole.

setDepthDistance(double) - Method in interface nxopen.cam.InspectionDeltaMoveBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDepthDistance(double) - Method in interface nxopen.cam.InspectionLinear5axisMoveToPointBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDepthDistance(double) - Method in interface nxopen.cam.InspectionLinearMoveToPointBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDepthDistance(double) - Method in interface nxopen.cam.InspectionMeasurePointBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDepthDistance(double) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDepthDistance(double) - Method in interface nxopen.cam.InspectionScanArcBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDepthDistance(double) - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDepthDistance(double) - Method in interface nxopen.cam.InspectionScanCurveBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDepthDistance(double) - Method in interface nxopen.cam.InspectionScanHelixBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDepthDistance(double) - Method in interface nxopen.cam.InspectionScanLineBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDepthDistance(double) - Method in interface nxopen.cam.InspectionUVGridBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDepthEndPoint(Point) - Method in interface nxopen.cam.CenterlineDrillTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setDepthLimit(HoleBossGeom.DepthLimitTypes) - Method in interface nxopen.cam.HoleBossGeom

Deprecated.

Deprecated in NX8.0.0. Use HoleBossSet.setDepthLimit(nxopen.cam.HoleBossSet.DepthLimitTypes) instead.

setDepthLimit(HoleBossSet.DepthLimitTypes) - Method in interface nxopen.cam.HoleBossSet

License requirements: cam_base ("CAM BASE")
.

setDepthMeasurementDatum(HoleTableSettingsFormatBuilder.DepthMeasurementDatumType) - Method in interface nxopen.annotations.HoleTableSettingsFormatBuilder

License requirements: drafting ("DRAFTING")
.

setDepthMethod(InspectionMoveBuilder.DepthMethodTypes) - Method in interface nxopen.cam.InspectionDeltaMoveBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDepthMethod(InspectionMoveBuilder.DepthMethodTypes) - Method in interface nxopen.cam.InspectionLinear5axisMoveToPointBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDepthMethod(InspectionMoveBuilder.DepthMethodTypes) - Method in interface nxopen.cam.InspectionLinearMoveToPointBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDepthMethod(InspectionMoveBuilder.DepthMethodTypes) - Method in interface nxopen.cam.InspectionMeasurePointBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDepthMethod(InspectionMoveBuilder.DepthMethodTypes) - Method in interface nxopen.cam.InspectionScanArcBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDepthMethod(InspectionMoveBuilder.DepthMethodTypes) - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDepthMethod(InspectionMoveBuilder.DepthMethodTypes) - Method in interface nxopen.cam.InspectionScanCurveBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDepthMethod(InspectionMoveBuilder.DepthMethodTypes) - Method in interface nxopen.cam.InspectionScanHelixBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDepthMethod(InspectionMoveBuilder.DepthMethodTypes) - Method in interface nxopen.cam.InspectionScanLineBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDepthMethod(InspectionMoveBuilder.DepthMethodTypes) - Method in interface nxopen.cam.InspectionUVGridBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDepthMethod(ShelfBuilder.DepthMethods) - Method in interface nxopen.features.ShelfBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setDepthMethod(StepBuilder.DepthMethods) - Method in interface nxopen.features.StepBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setDepthMode(BladeCutLevels.DepthModeTypes) - Method in interface nxopen.cam.BladeCutLevels

License requirements: cam_base ("CAM BASE")
.

setDepthOfFieldToggle(boolean) - Method in interface nxopen.display.CameraBuilder

License requirements: None.

setDepthOption(CenterlineDrillTurningBuilder.DepthTypes) - Method in interface nxopen.cam.CenterlineDrillTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setDepthOption(ThreadTurningBuilder.DepthOptionTypes) - Method in interface nxopen.cam.ThreadTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setDepthOption(HolePackageBuilder.HoleDepthOptions) - Method in interface nxopen.features.HolePackageBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDepthOption(ConicCrossSection.DepthMethod) - Method in interface nxopen.geometricutilities.ConicCrossSection

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDepthOption(EndHoleData.HoleDepthOptions) - Method in interface nxopen.geometricutilities.EndHoleData

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDepthPerCut(BladeCutLevels.DepthPerCutTypes) - Method in interface nxopen.cam.BladeCutLevels

License requirements: cam_base ("CAM BASE")
.

setDepthPerRevolution(CylinderMillingBuilder.DepthPerRevolutionTypes) - Method in interface nxopen.cam.CylinderMillingBuilder

License requirements: cam_base ("CAM BASE")
.

setDepthReference(CenterlineDrillTurningBuilder.DepthReferenceTypes) - Method in interface nxopen.cam.CenterlineDrillTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setDepthRootOpeningNumberOfWelds(String) - Method in interface nxopen.annotations.LineWeldSideData

Sets the depth or root opening or number of welds as the case may be
License requirements: None.

setDepthSide(LouverBuilder.DepthSideOptions) - Method in interface nxopen.features.sheetmetal.LouverBuilder

Sets the depth side for the louver.

setDepthSide(NormalCutoutBuilder.DepthSideOptions) - Method in interface nxopen.features.sheetmetal.NormalCutoutBuilder

Sets the depth side for the normal cutout.

setDepthSortedWireframe(boolean) - Method in interface nxopen.preferences.VisualizationLine

Sets the depth sorted wireframe.

setDepthStepMethod(MultiplePassesBuilder.StepMethodTypes) - Method in interface nxopen.cam.MultiplePassesBuilder

License requirements: cam_base ("CAM BASE")
.

setDepthThreshold(boolean, String) - Method in interface nxopen.preferences.PartSheetmetal

THE depth threshold
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setDepthToleranceParms(Tag, UFGdt.DepthTolerance) - Method in interface nxopen.uf.UFGdt

Refer to UF_GDT_set_depth_tolerance_parms for documentation.

setDepthType(SearchModelViewBuilder.ValueComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder

License requirements: None.

setDepthType(ProbeCalibrateStylusMoveBuilder.Depth) - Method in interface nxopen.cam.ProbeCalibrateStylusMoveBuilder

License requirements: None.

setDepthType(ProbeInspectBorebossMoveBuilder.Depth) - Method in interface nxopen.cam.ProbeInspectBorebossMoveBuilder

License requirements: None.

setDepthType(DimpleBuilder.DepthTypeOptions) - Method in interface nxopen.features.sheetmetal.DimpleBuilder

Sets the Direction in which the Dimple is punched.

setDepthType(DrawnCutoutBuilder.DepthTypeOptions) - Method in interface nxopen.features.sheetmetal.DrawnCutoutBuilder

Sets the Direction in which the Drawn Cutout is punched.

setDepthType(NormalCutoutBuilder.DepthTypeOptions) - Method in interface nxopen.features.sheetmetal.NormalCutoutBuilder

Sets the depth type for the normal cutout.

setDepthUnit(ReliefCut.DepthUnits) - Method in interface nxopen.cam.ReliefCut

License requirements: cam_base ("CAM BASE")
.

setDepthValue(double) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder

License requirements: None.

setDerivebeamres(boolean) - Method in interface nxopen.cae.ResultVariable

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDerived(boolean) - Method in interface nxopen.weld.DatumCommonBuilder

License requirements: ugweld ("UG WELD")
.

setDescription(String) - Method in interface nxopen.assemblies.productinterface.PropertyBuilder

License requirements: gateway ("UG GATEWAY")
.

setDescription(String[]) - Method in interface nxopen.cae.CaePart

Sets the description assoicated with the Cae part
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDescription(String[]) - Method in interface nxopen.cae.FemCreationOptions

Set FEM Part file descriptive text
License requirements: None.

setDescription(String) - Method in interface nxopen.cae.LaminatePly

License requirements: nx_lam_composites ("Laminate Composites")
.

setDescription(String[]) - Method in interface nxopen.cae.optimization.NameDescription

Sets the description
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setDescription(String[]) - Method in interface nxopen.cae.ResultProbeBuilder

Sets the description
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDescription(String[]) - Method in interface nxopen.cae.SimConditionSequence

Sets the condition sequence description
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDescription(String) - Method in interface nxopen.cae.SimConditionTimeStep

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDescription(String) - Method in interface nxopen.cae.SimLoadRecipe

License requirements: nx_masterfem ("Finite Element Modeling")
.

setDescription(String) - Method in interface nxopen.cam.NCGroupBuilder

License requirements: cam_base ("CAM BASE")
.

setDescription(String) - Method in interface nxopen.cam.OperationBuilder

License requirements: cam_base ("CAM BASE")
.

setDescription(String) - Method in interface nxopen.drawings.MarkAsTemplateBuilder

License requirements: drafting ("DRAFTING")
.

setDescription(String) - Method in interface nxopen.features.shipdesign.SteelDistributionBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setDescription(String[]) - Method in interface nxopen.features.vehicledesign.BaseDataLoadingBuilder

Sets the loading descriptions.

setDescription(String) - Method in interface nxopen.features.vehicledesign.BaseDataPassengerBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setDescription(String[]) - Method in interface nxopen.fields.Field

Update the description of the field.

setDescription(String, String) - Method in interface nxopen.gateway.BookmarkFile

Changes the description of an existing bookmark file.

setDescription(String) - Method in interface nxopen.layer.Category

Sets the category's description, if one exists
License requirements: None.

setDescription(String[]) - Method in interface nxopen.linedesigner.ConveyorStationFeatureBuilder

Sets the description
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setDescription(String[]) - Method in interface nxopen.mechatronics.ExpressionBlockBuilder

Sets description lines.

setDescription(String[]) - Method in interface nxopen.mechatronics.ObjectInformationBuilder

Sets the description.

setDescription(String) - Method in interface nxopen.motion.MotionSolutionBuilder

License requirements: mechanisms ("MECHANISMS")
.

setDescription(String) - Method in interface nxopen.PhysicalMaterial

Sets the material description
License requirements: None.

setDescription(String) - Method in interface nxopen.PhysicalMaterialBuilder

License requirements: None.

setDescription(String) - Method in interface nxopen.Step203Creator

Deprecated.

Deprecated in NX11.0.0. Use StepCreator instead.

setDescription(String) - Method in interface nxopen.Step214Creator

Deprecated.

Deprecated in NX11.0.0. Use StepCreator instead.

setDescription(String) - Method in interface nxopen.StepCreator

License requirements: None.

setDescription(String) - Method in interface nxopen.tooling.FlowAnalysisBuilder

License requirements: ug_mold_design ("UG MOLD")
.

setDescription(Tag, UFGdt.Description) - Method in interface nxopen.uf.UFGdt

Refer to UF_GDT_set_description for documentation.

setDescription(Tag, String) - Method in interface nxopen.uf.UFPart

Refer to UF_PART_set_description for documentation.

setDescription(String) - Method in interface nxopen.visualreporting.Condition

License requirements: nx_visual_reporting ("Visual Reporting")
.

setDescription(String) - Method in interface nxopen.visualreporting.VisualReport

License requirements: nx_visual_reporting ("Visual Reporting")
.

setDescriptionOfCondition(Condition, String) - Method in interface nxopen.visualreporting.VisualReportBuilder

Sets the Condition.description() of the specified Condition .

setDescriptionOfVisualReport(String) - Method in interface nxopen.visualreporting.VisualReportBuilder

License requirements: None.

setDescriptions(String[]) - Method in interface nxopen.cae.responsesimulation.ObjectLabel

Sets the description for the object
License requirements: nx_response_anlys ("NX Response Analysis")
.

setDescriptionString(String[]) - Method in interface nxopen.cae.responsesimulation.DynamicResultEvaluationSettingBuilder

Sets the description
License requirements: nx_response_anlys ("NX Response Analysis")
.

setDescriptiveCategory(String) - Method in interface nxopen.visualreporting.VisualReport

License requirements: nx_visual_reporting ("Visual Reporting")
.

setDescriptiveCategoryOfVisualReport(String) - Method in interface nxopen.visualreporting.VisualReportBuilder

License requirements: None.

setDescriptiveModifier(String) - Method in interface nxopen.annotations.PartIdentificationBuilder

License requirements: None.

setDescriptiveName(String) - Method in interface nxopen.tooling.ReusableObject

License requirements: None.

setDescriptiveName(String) - Method in interface nxopen.tooling.SelectReuseLibraryItemBuilder

Sets the descriptive name
License requirements: None.

setDescriptiveName(String) - Method in interface nxopen.tooling.SpreadsheetDataParameter

License requirements: None.

setDescriptorCharxType(RoutePartDescriptor.CharxType) - Method in interface nxopen.routing.RoutePartDescriptor

License requirements: routing_base ("Routing Basic")
.

setDescriptorName(String) - Method in interface nxopen.cae.GeneralGeometryBeamSectionBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDescriptorName(String) - Method in interface nxopen.cae.StandardBeamSectionBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDescriptorName(String) - Method in interface nxopen.cae.UserDefinedSolidBeamSectionBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDescriptorSourceType(RoutePartDescriptor.SourceType) - Method in interface nxopen.routing.RoutePartDescriptor

License requirements: routing_base ("Routing Basic")
.

setDesignConstraints(DAOConstraint[]) - Method in interface nxopen.cae.optimization.DAOSolution

Deprecated.

Deprecated in NX9.0.0. Not a valid method. Use DAOSolution.createConstraintBuilder(nxopen.cae.optimization.DAOConstraint) instead.

setDesignCreation(InspectionConstructedFeatureBuilder.DesignCreationType) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDesignData(BaseDataWheelBuilder) - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setDesignElementAttributeValue(DisplayableObject, ManufacturingPreparationBuilder.AttributeType, String) - Method in interface nxopen.features.shipdesign.ManufacturingPreparationBuilder

Set the attribute value of the given design element.

setDesignElementState(String) - Method in interface nxopen.FileNew

License requirements: None.

setDesignElementType(String) - Method in interface nxopen.assemblies.DesignElementBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setDesignElementType(String) - Method in interface nxopen.FileNew

License requirements: None.

setDesignerName(String) - Method in interface nxopen.tooling.ConcurrentDesignManagementBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setDesignFeatureGroup(Feature) - Method in interface nxopen.features.shipdesign.DvToMvMappingBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setDesignHours(double) - Method in interface nxopen.tooling.QuickQuotationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setDesignOffsetGeometry(NXObject) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDesignOption(BurringInsertBuilder.DesignOptions) - Method in interface nxopen.tooling.BurringInsertBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setDesignOption(FormingInsertBuilder.DesignOptions) - Method in interface nxopen.tooling.FormingInsertBuilder

License requirements: None.

setDesignPrice(double) - Method in interface nxopen.tooling.QuickQuotationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setDesignResponse(TBSDesignResponse) - Method in interface nxopen.cae.optimization.TBSConstraintBuilder

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setDesignResponse(TBSDesignResponse) - Method in interface nxopen.cae.optimization.TBSSingleObjective

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setDesignSequence(int) - Method in interface nxopen.tooling.DirectUnfoldBuilder

License requirements: None.

setDesignSequence(IntermediateStageBuilder.DesignSequences) - Method in interface nxopen.tooling.IntermediateStageBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setDesignStatus(boolean) - Method in interface nxopen.die.CastReliefParentBuilder

Sets the design status of cast relief, if true the cast relief will be built into the model, if false it will not.

setDesignStatus(boolean) - Method in interface nxopen.die.ConnectProfileParentBuilder

Sets the design status of die connecting profiles
License requirements: ug_die_design ("Die Design")
.

setDesignStatus(boolean) - Method in interface nxopen.die.DeckParentBuilder

Sets the design status of deck, if true the deck will be built into the model, if false it will not.

setDesignStatus(boolean) - Method in interface nxopen.die.DrawDiePunchSectionBuilder

License requirements: ug_die_design ("Die Design")
.

setDesignStatus(boolean) - Method in interface nxopen.die.FlangeSteelRibChildBuilder

Sets the design status of the Flange Steel Rib
License requirements: ug_die_design ("Die Design")
.

setDesignStatus(boolean) - Method in interface nxopen.die.FlangeSteelRibParentBuilder

Sets the design status of the Flange Steel Ribs
License requirements: ug_die_design ("Die Design")
.

setDesignStatus(boolean) - Method in interface nxopen.die.HandlingCoreChildBuilder

Sets the design status of the handling core, if true the handling core will be built into the model, if false it will not.

setDesignStatus(boolean) - Method in interface nxopen.die.HandlingCoreParentBuilder

Sets the design status of handling cores, if true the handling cores will be built into the model, if false they will not.

setDesignStatus(boolean) - Method in interface nxopen.die.HoleChildBuilder

Sets the design status of the die hole, if true the hole will be built into the model, if false it will not.

setDesignStatus(boolean) - Method in interface nxopen.die.HoleParentBuilder

Sets the design status of die holes, if true the holes will be built into the model, if false they will not.

setDesignStatus(boolean) - Method in interface nxopen.die.KeywayChildBuilder

Sets the design status of the keyway, if true the keyway will be built into the model, if false it will not.

setDesignStatus(boolean) - Method in interface nxopen.die.KeywayParentBuilder

Sets the design status of keyways, if true the keyways will be built into the model, if false they will not.

setDesignStatus(boolean) - Method in interface nxopen.die.PadChildBuilder

Sets the design status of the die pad, if true the pad will be built into the model, if false it will not.

setDesignStatus(boolean) - Method in interface nxopen.die.PadParentBuilder

Sets the design status of die pads, if true the pads will be built into the model, if false they will not.

setDesignStatus(boolean) - Method in interface nxopen.die.PierceHoleChildBuilder

Sets the design status of the pierce hole
License requirements: ug_die_design ("Die Design")
.

setDesignStatus(boolean) - Method in interface nxopen.die.PierceHoleParentBuilder

Sets the design status of pierce holes
License requirements: ug_die_design ("Die Design")
.

setDesignStatus(boolean) - Method in interface nxopen.die.PointChildBuilder

Sets the design status of the point, if true the point will be built into the model, if false it will not.

setDesignStatus(boolean) - Method in interface nxopen.die.PointParentBuilder

Sets the design status of points, if true the points will be built into the model, if false they will not.

setDesignStatus(boolean) - Method in interface nxopen.die.PressureSystemChildBuilder

Sets the design status of the pressure system, if true the pressure system will be built into the model, if false it will not.

setDesignStatus(boolean) - Method in interface nxopen.die.PressureSystemParentBuilder

Sets the design status of pressure systems, if true the pressure systems will be built into the model, if false they will not.

setDesignStatus(boolean) - Method in interface nxopen.die.RibChildBuilder

Sets the design status of the die rib, if true the rib will be built into the model, if false it will not.

setDesignStatus(boolean) - Method in interface nxopen.die.RibParentBuilder

Sets the design status of die ribs, if true the ribs will be built into the model, if false they will not.

setDesignStatus(boolean) - Method in interface nxopen.die.RotorSectionBuilder

Sets the design status of the die rotor casting
License requirements: ug_die_design ("Die Design")
.

setDesignStatus(boolean) - Method in interface nxopen.die.SteelInsertSegmentChildBuilder

Sets the design status of die sisegs
License requirements: ug_die_design ("Die Design")
.

setDesignStatus(boolean) - Method in interface nxopen.die.SteelInsertSegmentParentBuilder

Sets the design status of die sisegs
License requirements: ug_die_design ("Die Design")
.

setDesignStatus(boolean) - Method in interface nxopen.die.ThroatChildBuilder

Sets the design status of the throat section, if true the throat section will be built into the model, if false it will not.

setDesignStatus(boolean) - Method in interface nxopen.die.ThroatParentBuilder

Sets the design status of the throat sections, if true the throat sections will be built into the model, if false they will not.

setDesignStatus(boolean) - Method in interface nxopen.die.WearPlateLocChildBuilder

Sets the design status of wear plate and locators
License requirements: ug_die_design ("Die Design")
.

setDesignStatus(boolean) - Method in interface nxopen.die.WearPlateLocParentBuilder

Sets the design status of wear plate and locators
License requirements: ug_die_design ("Die Design")
.

setDesignStudyObjectives(String[], NXObject[], DesignStudyBuilder.DesignStudyAttributeType[], double[], double[], double[], double[]) - Method in interface nxopen.optimization.DesignStudyBuilder

Sets the objectives
License requirements: None.

setDesignStudyVariables(String[], NXObject[], DesignStudyBuilder.DesignStudyAttributeType[], double[], double[], DesignStudyBuilder.DesignStudyDistributeType[], double[], double[], double[], int[]) - Method in interface nxopen.optimization.DesignStudyBuilder

Sets the variables
License requirements: None.

setDesignTasks(String) - Method in interface nxopen.tooling.ConcurrentDesignManagementBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setDesignTool(InsertAuxiliaryBuilder.DesignToolOption) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder

License requirements: None.

setDesignToolOpt(DieBaseBuilder.DesignToolOption) - Method in interface nxopen.tooling.DieBaseBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setDesignVarActive(int, boolean) - Method in interface nxopen.cae.ModelUpdateSolution

Sets a specific design variable as active or not
License requirements: nx_correl_update ("FE Model Update")
.

setDesignVariableLabels(String[]) - Method in interface nxopen.cae.ModelUpdateSensitivityViewerBuilder

Sets the design variable labels
License requirements: nx_correl_update ("FE Model Update")
.

setDesignVariablesInitialValue(double) - Method in interface nxopen.cae.ModelUpdateSolution

Sets the value of the design variables.

setDesignVariableType(ModelUpdateDesignVariablesRapidCreateBuilder.DesignVariableTypeEnum) - Method in interface nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder

License requirements: nx_correl_update ("FE Model Update")
.

setDesignVarLinearRange(double) - Method in interface nxopen.cae.ModelUpdateOptimOptionsBuilder

License requirements: nx_correl_update ("FE Model Update")
.

setDesignVarLowerBound(int, double) - Method in interface nxopen.cae.ModelUpdateSolution

Sets lower bound for a specific design variable
License requirements: nx_correl_update ("FE Model Update")
.

setDesignVarUpperBound(int, double) - Method in interface nxopen.cae.ModelUpdateSolution

Sets upper bound for a specific design variable
License requirements: nx_correl_update ("FE Model Update")
.

setDesignVarValue(int, double) - Method in interface nxopen.cae.ModelUpdateSolution

Sets value for a specific design variable
License requirements: nx_correl_update ("FE Model Update")
.

setDesignVarWeight(double) - Method in interface nxopen.cae.ModelUpdateOptimOptionsBuilder

License requirements: nx_correl_update ("FE Model Update")
.

setDesignVarWeight(int, double) - Method in interface nxopen.cae.ModelUpdateSolution

Sets weight for a specific design variable
License requirements: nx_correl_update ("FE Model Update")
.

setDestEnum(FaceAnnotationBuilder.DrwDestination) - Method in interface nxopen.formboard.FaceAnnotationBuilder

License requirements: routing_harness ("Routing Harness")
.

setDestForUnselectedLayer(int) - Method in interface nxopen.DxfdwgImporter

License requirements: None.

setDestination(SurfaceWeldBuilder.DestinationTypes) - Method in interface nxopen.weld.SurfaceWeldBuilder

License requirements: structure_weld ("STRUCTURE WELD")
.

setDestination(WeldJointBuilder.DestinationTypes) - Method in interface nxopen.weld.WeldJointBuilder

License requirements: structure_weld ("STRUCTURE WELD")
.

setDestinationCoordinateSystem(NXMatrix) - Method in interface nxopen.PartImporter

Sets the destination coordinate system.

setDestinationCoordinateSystemSpecification(PartImporter.DestinationCoordinateSystemSpecificationType) - Method in interface nxopen.PartImporter

Sets the destination coordinate system specification.

setDestinationCsys(CoordinateSystem) - Method in interface nxopen.features.OptimizeCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDestinationElements(FEElement[]) - Method in interface nxopen.cae.responsesimulation.ElementalFunctionEvaluationSettingBuilder

Sets the destination elements
License requirements: nx_response_anlys ("NX Response Analysis")
.

setDestinationElements(FEElement[]) - Method in interface nxopen.cae.responsesimulation.ResponseResultsEvaluationSettingBuilder

Sets the destination elements
License requirements: nx_response_anlys ("NX Response Analysis")
.

setDestinationElements(FEElement[]) - Method in interface nxopen.cae.responsesimulation.StrengthResultsEvaluationSettingBuilder

Sets the destination elements
License requirements: nx_response_anlys ("NX Response Analysis")
.

setDestinationFilename(String) - Method in interface nxopen.gateway.CopyCutBuilder

License requirements: None.

setDestinationFolder(SimLbcFolder) - Method in interface nxopen.cae.AutoBCBuilder

Sets the destination folder of SimBC object
License requirements: None.

setDestinationFolder(SimLbcFolder) - Method in interface nxopen.cae.SimBCBuilder

Sets the destination folder of CAE.SimBC object
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Created in NX9.0.0

setDestinationFolder(String) - Method in interface nxopen.tooling.EjectorTableBuilder

License requirements: ug_mold_design ("UG MOLD")
.

setDestinationFrame(Point3d, Matrix3x3) - Method in interface nxopen.features.FlatteningAndFormingBuilder

Sets the destination coordinate system used for the flattened result.

setDestinationNodes(FENode[]) - Method in interface nxopen.cae.responsesimulation.NodalFunctionEvaluationSettingBuilder

Sets the destination nodes
License requirements: nx_response_anlys ("NX Response Analysis")
.

setDestinationNodes(FENode[]) - Method in interface nxopen.cae.responsesimulation.ResponseResultsEvaluationSettingBuilder

Sets the destination nodes
License requirements: nx_response_anlys ("NX Response Analysis")
.

setDestinationOpt(PasteSpecialBuilder.DestinationOption) - Method in interface nxopen.PasteSpecialBuilder

License requirements: None.

setDestinationPart(String) - Method in interface nxopen.drawings.ViewCopyTo3dBuilder

License requirements: nx_layout ("NX Layout")
.

setDestinationPath(String) - Method in interface nxopen.layout2d.PublishComponentBuilder

License requirements: nx_layout ("NX Layout")
.

setDestinationPcsEnum(InspectionConstructedFeatureBuilder.DestPcsEnumType) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDestinationPoint(Point3d) - Method in interface nxopen.PartImporter

Sets the destination point.

setDestinationPoint(Point) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder

License requirements: None.

setDestinationPoint(Point) - Method in interface nxopen.tooling.InsertEditToolsBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setDestinationPosition(Point) - Method in interface nxopen.display.LightBuilder

License requirements: None.

setDestinationTeamcenterFolder(String) - Method in interface nxopen.visualreporting.VisualReport

License requirements: nx_visual_reporting ("Visual Reporting")
.

setDestinationTeamcenterFolder(String) - Method in interface nxopen.visualreporting.VisualReportBuilder

License requirements: None.

setDestinationView(View) - Method in interface nxopen.drafting.CutCopyPasteBuilder

License requirements: drafting ("DRAFTING")
.

setDestinationView(View) - Method in interface nxopen.drafting.CutCopyPasteLeaderBuilder

License requirements: drafting ("DRAFTING")
.

setDestPropertyId(int) - Method in interface nxopen.mechatronics.RuntimeFormulaBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setDetachNodeOption(boolean) - Method in interface nxopen.cae.ElementDetachBuilder

License requirements: None.

setDetachObject(boolean) - Method in interface nxopen.mechanicalrouting.EditPointBuilder

License requirements: routing_base ("Routing Basic")
.

setDetachType(MovePathBuilder.DetachTypes) - Method in interface nxopen.mechanicalrouting.MovePathBuilder

License requirements: routing_base ("Routing Basic")
.

setDetailedMessage(boolean) - Method in interface nxopen.cae.modelcheck.ModelSetupCheckBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDetailedOutput(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setDetailID(String) - Method in interface nxopen.drafting.DrawingCreationWizardBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setDetailLevel(BillOfMaterialBuilder.DetailLevelType) - Method in interface nxopen.annotations.BillOfMaterialBuilder

License requirements: routing_base ("Routing Basic")
.

setDetailLevel(int) - Method in interface nxopen.sim.KinematicSinumerikCaBuilder

License requirements: nx_sinumerik_ca ("Sinumerik Collision Avoidance")
.

setDetailReason(String[]) - Method in interface nxopen.validate.OverrideBuilder

Sets the detail reason The detail reason is optional unless override reason configuration is mandatory in Teamcenter.

setDetails(String[]) - Method in interface nxopen.die.FlangeTaskBuilder

Sets the detailed description of the flange task
License requirements: die_engineering ("DIE ENGINEERING")
.

setDetails(String[]) - Method in interface nxopen.die.FormTaskBuilder

Sets the details of the form task.

setDetails(String[]) - Method in interface nxopen.die.LineupBuilder

Sets the detailed description of the lineup
License requirements: die_engineering ("DIE ENGINEERING")
.

setDetails(String[]) - Method in interface nxopen.die.PierceTaskBuilder

Sets the detailed description of the pierce task
License requirements: die_engineering ("DIE ENGINEERING")
.

setDetails(String[]) - Method in interface nxopen.die.TrimTaskBuilder

Sets the detailed description of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.

setDetails(String[]) - Method in interface nxopen.tooling.DieEngFormTaskBuilder

Sets the detailed information of the feature.

setDeviateFromStandard(boolean) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setDeviation(String) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder

License requirements: None.

setDeviationalTolerance(double) - Method in interface nxopen.features.sheetmetal.ExportFlatPatternBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setDeviationalToleranceInFlatSolid(boolean, double) - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign

Sets the deviational tolerance during Flat Solid simplification
License requirements: nx_flexible_pcb ("NX Flexible PCB")
.

setDeviationalToleranceInFlatSolid(boolean, double) - Method in interface nxopen.preferences.PartSheetmetal

SETS the deviational tolerance during Flat Solid simplification
License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setDeviationIntervals(int) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setDeviationOption(DeviationChecking.DeviationOptions) - Method in interface nxopen.geometricanalysis.DeviationChecking

License requirements: None.

setDevice(String) - Method in interface nxopen.sim.KinematicChain

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setDeviceId(String) - Method in interface nxopen.sim.KinematicComponentBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setDeviceIndex(int) - Method in interface nxopen.cae.xyplot.BasePlotParameters

License requirements: nx_ftk ("NX Advanced Graphing")
.

setDeviceName(String) - Method in interface nxopen.cam.InspectionCmmCommandBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDeviceType(InspectionCmmCommandBuilder.DeviceTypeOptions) - Method in interface nxopen.cam.InspectionCmmCommandBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDeviceType(ReadWriteDeviceBuilder.DeviceType) - Method in interface nxopen.mechatronics.ReadWriteDeviceBuilder

Sets device type.

setDevLength(double) - Method in interface nxopen.tooling.DirectUnfoldBuilder

Deprecated.

Deprecated in NX10.0.0. Use Tooling.DefineNeutralFactorBuilder#setBendDevelopedLength instead.

setDevTolPlaces(int) - Method in interface nxopen.cam.InspectionCmmCommandBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDfaFiles(String[]) - Method in interface nxopen.pdm.PartOperationImportBuilder

Set the dfa files
License requirements: assemblies ("ASSEMBLIES MODULE")
.

setDialogBarDecimalPlaces(int) - Method in interface nxopen.preferences.SessionUserInterfaceUI

Sets the dialog box decimal places
License requirements: None.

setDialogBarTracking(boolean) - Method in interface nxopen.preferences.SessionUserInterfaceUI

Sets the dialog bar tracking flag
License requirements: None.

setDialogBoxDecimalPlaces(int) - Method in interface nxopen.preferences.PartUserInterface

Sets the dialog box decimal places
License requirements: None.

setDialogDirectory(UFUi.DialogDirId, String) - Method in interface nxopen.uf.UFUi

Refer to UF_UI_set_dialog_directory for documentation.

setDialogDisplay(boolean) - Method in interface nxopen.uf.UFUgmgr

Refer to UF_UGMGR_set_dialog_display for documentation.

setDialogFilter(UFUi.DialogFilterId, String) - Method in interface nxopen.uf.UFUi

Refer to UF_UI_set_dialog_filter for documentation.

setDialogOperation(PartOperationBuilder.OperationType) - Method in interface nxopen.pdm.PartOperationBuilder

Sets the dialog operation.

setDialogOption(ReusePositioningObjectBuilder.DialogOptions) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder

License requirements: None.

setDialogSizing(int) - Method in interface nxopen.blockstyler.CompositeBlock

License requirements: None.

setDialogSizingAsString(String) - Method in interface nxopen.blockstyler.CompositeBlock

License requirements: None.

setDialogType(PenetrationRequestBuilder.RequestDialogType) - Method in interface nxopen.features.shipdesign.PenetrationCutoutBuilder

Set the dialog type
License requirements: nx_penetration_mgmt ("Penetration Management")
.

setDialogType(PenetrationRequestBuilder.RequestDialogType) - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setDialogViolationId(int) - Method in interface nxopen.routing.DesignRuleViolationViewer

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setDiamDimLineAng(double) - Method in interface nxopen.annotations.BaseDiameterDimension

Deprecated.

Deprecated in NX6.0.0. Use BaseDiameterDimension.setDiameterDimensionLineAngle(double) instead.

setDiameter(Value) - Method in interface nxopen.annotations.CircularTargetData

Sets the diameter
License requirements: None.

setDiameter(Value) - Method in interface nxopen.annotations.ICircularTarget

Sets the target diameter.

setDiameter(double) - Method in interface nxopen.cam.BoundaryTurnBlank

License requirements: cam_base ("CAM BASE")
.

setDiameter(double) - Method in interface nxopen.cam.HoleBossSet

License requirements: cam_base ("CAM BASE")
.

setDiameter(double) - Method in interface nxopen.cam.InspectionCircleFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDiameter(double) - Method in interface nxopen.cam.InspectionCylinderFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDiameter(double) - Method in interface nxopen.cam.InspectionSphereFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDiameter(double) - Method in interface nxopen.cam.LaserCutoutDefinition

License requirements: cam_base ("CAM BASE")
.

setDiameter(double) - Method in interface nxopen.cam.ProbeCalibrateSphereMoveBuilder

License requirements: cam_base ("CAM BASE")
.

setDiameter(double) - Method in interface nxopen.cam.ProbeCalibrateStylusMoveBuilder

License requirements: None.

setDiameter(double) - Method in interface nxopen.cam.ProbeInspectBorebossMoveBuilder

License requirements: None.

setDiameter(double) - Method in interface nxopen.cam.WireGuide

License requirements: cam_base ("CAM BASE")
.

setDiameter(double) - Method in interface nxopen.die.HoleChildBuilder

Sets the diameter of the die hole.

setDiameter(double) - Method in interface nxopen.die.HoleParentBuilder

Sets the diameter of die holes.

setDiameter(double) - Method in interface nxopen.die.PadChildBuilder

Sets the diameter of the die pad.

setDiameter(double) - Method in interface nxopen.die.PadParentBuilder

Sets the diameter of die pads.

setDiameter(String) - Method in interface nxopen.die.PierceHoleChildBuilder

License requirements: ug_die_design ("Die Design")
.

setDiameter(String) - Method in interface nxopen.die.PierceHoleParentBuilder

License requirements: ug_die_design ("Die Design")
.

setDiameter(double) - Method in interface nxopen.die.PressureSystemChildBuilder

Sets the diameter of the pressure system.

setDiameter(double) - Method in interface nxopen.die.PressureSystemParentBuilder

Sets the diameter of pressure systems.

setDiameter(String) - Method in interface nxopen.features.HoleFeatureBuilder

Sets the diameter of the hole.

setDiameter(String) - Method in interface nxopen.features.sheetmetal.ThreeBendCornerBuilder

Deprecated.

Deprecated in NX10.0.0. Use Expression.setRightHandSide(java.lang.String) on the Expression object returned from ThreeBendCornerBuilder.diameter() instead.

setDiameter(double) - Method in interface nxopen.features.vehicledesign.BaseDataWheelBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setDiameter(Expression) - Method in interface nxopen.mechanicalrouting.PathStockPreferenceBuilder

Sets the diameter value to use for the PathStockPreferenceBuilder.AssignMethod.CIRCULAR method of stock assignment.

setDiameter(NXObject, double) - Method in interface nxopen.tooling.ReusablePocketBuilder

Sets diameter for hole series.

setDiameterDimensionDimLineAngle(double) - Method in interface nxopen.annotations.BaseRadialDimensionBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDiameterDimensionLineAngle(double) - Method in interface nxopen.annotations.BaseDiameterDimension

Sets a value of diameter dimension line angle
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDiameterForHelix(CylinderMillingBuilder.DiameterForHelixTypes) - Method in interface nxopen.cam.CylinderMillingBuilder

License requirements: cam_base ("CAM BASE")
.

setDiameterMode(String, boolean) - Method in interface nxopen.sim.MachineToolConfiguration

Sets the diameter mode, which change the output behavior of length values during turning.

setDiameterRadiusPlacement(DiameterRadiusSymbolPlacement) - Method in interface nxopen.annotations.RadialStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDiameterRadiusPreferences(DiameterRadiusPreferences) - Method in interface nxopen.annotations.DimensionPreferences

Sets the diameter and radius preferences
License requirements: None.

setDiameterRadiusPreferences(UFDrf.DiameterRadiusPreferences) - Method in interface nxopen.uf.UFDrf

Refer to UF_DRF_set_diameter_radius_preferences for documentation.

setDiameterSymbol(DiameterSymbol) - Method in interface nxopen.annotations.DiameterRadiusPreferences

Sets the diameter symbol
License requirements: None.

setDiameterSymbol(String) - Method in interface nxopen.annotations.RadialStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDiameterSymbol(SearchCriteriaDimensionBuilder.DiameterSymbolOptions) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder

License requirements: None.

setDiameterSymbolText(String) - Method in interface nxopen.annotations.DiameterRadiusPreferences

Sets the symbol text for user defined diameter symbol
License requirements: None.

setDiameterSymbolType(DiameterSymbol) - Method in interface nxopen.annotations.RadialStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDiameterType(SearchModelViewBuilder.ValueComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder

License requirements: None.

setDiameterType(DiameterType) - Method in interface nxopen.cae.connections.IDiameterDefinition

License requirements: nx_masterfem ("Finite Element Modeling")
.

setDiameterValue(double) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder

License requirements: None.

setDiameterValue(double) - Method in interface nxopen.routing.PathStockBuilder

Sets the diameter value to use for the Routing.PathStockBuilder.AssignMethod#DIAMETER_VALUE method of stock assignment.

setDiaScaleFactor(double) - Method in interface nxopen.cae.CircularImprintBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setDieBaseType(DieBaseBuilder.DieBaseTypeOpt) - Method in interface nxopen.tooling.DieBaseBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setDieCenterlineCsys(CartesianCoordinateSystem) - Method in interface nxopen.die.DrawDiePunchBuilder

Sets the die centerline csys of the draw die punch casting.

setDieClearance(String) - Method in interface nxopen.die.PierceHoleChildBuilder

License requirements: ug_die_design ("Die Design")
.

setDieClearance(String) - Method in interface nxopen.die.PierceHoleParentBuilder

License requirements: ug_die_design ("Die Design")
.

setDieInsertType(DieInsertBuilder.DieInsertTypeItems) - Method in interface nxopen.tooling.DieInsertBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setDieInsertType(PiercingInsertBuilder.DieInsertTypeItems) - Method in interface nxopen.tooling.PiercingInsertBuilder

License requirements: None.

setDieOffsetValue(double) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setDieOffsetValue(double) - Method in interface nxopen.tooling.PiercingInsertBuilder

License requirements: None.

setDiePenetration(double) - Method in interface nxopen.tooling.DieDesPierceInsertBuilder

License requirements: ug_die_design ("Die Design")
.

setDiePlateClearance(double) - Method in interface nxopen.tooling.BendInsertDesignBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setDiePlateClearance(double) - Method in interface nxopen.tooling.FormingInsertBuilder

License requirements: None.

setDiePosition(double) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setDieRadius(String) - Method in interface nxopen.features.sheetmetal.BeadBuilder

Deprecated.

Deprecated in NX10.0.0. Use Expression.setRightHandSide(java.lang.String) on the Expression object returned from BeadBuilder.dieRadius() instead.

setDieRadius(String) - Method in interface nxopen.features.sheetmetal.DimpleBuilder

Deprecated.

Deprecated in NX10.0.0. Use Expression.setRightHandSide(java.lang.String) on the Expression object returned from DimpleBuilder.getDieRadius() instead.

setDieRadius(String) - Method in interface nxopen.features.sheetmetal.LouverBuilder

Deprecated.

Deprecated in NX10.0.0. Use Expression.setRightHandSide(java.lang.String) on the Expression object returned from LouverBuilder.dieRadius() instead.

setDieSameOffsetValue(boolean) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setDieSameOffsetValue(boolean) - Method in interface nxopen.tooling.PiercingInsertBuilder

License requirements: None.

setDieStandardInsertInstance(TaggedObject) - Method in interface nxopen.tooling.DieInsertBuilder

License requirements: None.

setDifferentColorsAsBoundaryFacesOption(boolean) - Method in interface nxopen.tooling.MWSearchRegionBuilder

License requirements: None.

setDifferentPenetration(boolean) - Method in interface nxopen.tooling.PunchInsertBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setDigital(boolean) - Method in interface nxopen.motion.ControlInputPortBuilder

License requirements: mechanisms ("MECHANISMS")
.

setDimAppendedTextSpaceFactor(double) - Method in interface nxopen.annotations.LetteringPreferences

Sets the dimension/appended text space factor
License requirements: None.

setDimAppendedTextSpaceFactor(Tag, double) - Method in interface nxopen.uf.UFDrf

Refer to UF_DRF_set_dim_appended_text_space_factor for documentation.

setDimArrowDisplay(ArrowDisplay) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDimCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use TrackDrawingChangesReportFilterBuilder.setReportFilterStatus(nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter, boolean) instead.

setDimDimLineSpaceFactor(double) - Method in interface nxopen.annotations.LetteringPreferences

Sets the dimension/dimension line space factor
License requirements: None.

setDimDimLineSpaceFactor(Tag, double) - Method in interface nxopen.uf.UFDrf

Refer to UF_DRF_set_dim_dim_line_space_factor for documentation.

setDimensionalConstraint(boolean) - Method in interface nxopen.InferredConstraintsBuilder

License requirements: None.

setDimensionalityAsString(String) - Method in interface nxopen.blockstyler.ExpressionBlock

License requirements: None.

setDimensionAngularFormat(AngularDimensionFormat) - Method in interface nxopen.annotations.UnitsStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDimensionArrowheadType(ArrowheadType) - Method in interface nxopen.annotations.NarrowDimensionPreferences

Sets the dimension arrowhead type when no space for normal arrowheads
License requirements: None.

setDimensionCharacterSize(double) - Method in interface nxopen.tooling.AutoDimensionBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setDimensionColor(int) - Method in interface nxopen.preferences.PartSketch

Sets the sketch dimension color
License requirements: None.

setDimensionColor(NXColor) - Method in interface nxopen.tooling.AutoDimensionBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setDimensionDecimalPlaces(int) - Method in interface nxopen.annotations.AngularTolerance

Sets the number of decimal places for dimension
License requirements: None.

setDimensionDisplayOption(NarrowDisplayOption) - Method in interface nxopen.annotations.NarrowDimensionPreferences

Sets the dimension display option
License requirements: None.

setDimensionLabel(SketchPreferences.DimensionLabelType) - Method in interface nxopen.preferences.SessionSketch

Sets the dimension label
License requirements: None.

setDimensionLabel(SketchPreferences.DimensionLabelType) - Method in interface nxopen.preferences.SketchPreferences

Sets the dimension label.

setDimensionLeaderAngle(double) - Method in interface nxopen.annotations.NarrowDimensionPreferences

Sets the dimension leader angle
License requirements: None.

setDimensionLeadingZero(boolean) - Method in interface nxopen.annotations.UnitsFormatPreferences

Sets the dimension leading zero display property
License requirements: None.

setDimensionLinearUnits(DimensionUnit) - Method in interface nxopen.annotations.UnitsStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDimensionNxTextCharacterSpaceFactor(double) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDimensionOffset(double) - Method in interface nxopen.annotations.DimensionSet

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDimensionOrientationVector(Direction) - Method in interface nxopen.features.LinearDimensionBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setDimensionPreferences(DimensionPreferences) - Method in interface nxopen.annotations.Dimension

Sets the dimension preferences
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDimensionPreferences(DimensionPreferences) - Method in interface nxopen.annotations.DimensionData

Sets the dimension preferences
License requirements: None.

setDimensionPreferences(DimensionPreferences) - Method in interface nxopen.preferences.AnnotationPreferences

Sets the global dimension preferences for the part
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDimensionPreferences(UFDrf.DimensionPreferences) - Method in interface nxopen.uf.UFDrf

Refer to UF_DRF_set_dimension_preferences for documentation.

setDimensionPreferences1(UFDrf.DimensionPreferences1) - Method in interface nxopen.uf.UFDrf

Refer to UF_DRF_set_dimension_preferences1 for documentation.

setDimensionRule(String) - Method in interface nxopen.drafting.RulesBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setDimensions(Dimension[]) - Method in interface nxopen.annotations.AppendedTextEditorBuilder

Sets all the dimensions to the builder
License requirements: None.

setDimensionSetOffset(Tag, double) - Method in interface nxopen.uf.UFDrf

Refer to UF_DRF_set_dimension_set_offset for documentation.

setDimensionStandardTextCharacterSpaceFactor(double) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDimensionText(String[]) - Method in interface nxopen.annotations.Dimension

Set the main dimension text.

setDimensionText(Lettering) - Method in interface nxopen.annotations.LetteringPreferences

Sets the dimension text
License requirements: None.

setDimensionTextAspectRatio(double) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDimensionTextCharSpaceFactor(double) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDimensionTextColor(NXColor) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDimensionTextFont(int) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDimensionTextItalicized(boolean) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDimensionTextLineSpaceFactor(double) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDimensionTextLineWidth(LineWidth) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDimensionTextOffset(double) - Method in interface nxopen.annotations.NarrowDimensionPreferences

Sets the dimension text offset
License requirements: None.

setDimensionTextOrientation(NarrowTextOrientation) - Method in interface nxopen.annotations.NarrowDimensionPreferences

Sets the dimension text orientation
License requirements: None.

setDimensionTextSize(double) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDimensionTextSymbolAspectRatio(double) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDimensionTolerancePlacement(TolerancePlacement) - Method in interface nxopen.annotations.UnitsStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDimensionType(SearchCriteriaDimensionBuilder.DimensionTypes) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder

License requirements: None.

setDimensionType(AeroFlangeBuilder.DimType) - Method in interface nxopen.features.sheetmetal.AeroFlangeBuilder

Set the length dimension type of the flange
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setDimensionType(DimpleBuilder.DimensionTypeOptions) - Method in interface nxopen.features.sheetmetal.DimpleBuilder

Sets the Offset Dimension
The actual extent distance of the Dimple will be determined by the active dimension option.

setDimensionType(JogBuilder.DimensionTypeOptions) - Method in interface nxopen.features.sheetmetal.JogBuilder

Sets the Offset Dimension
The actual extent distance of the Jog will be determined by the active dimension option.

setDimensionType(SketchAutoDimensionBuilder.DimType) - Method in interface nxopen.SketchAutoDimensionBuilder

License requirements: None.

setDimensionValue(double) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder

License requirements: None.

setDimensionValuePrecision(int) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDimensionValueType(SearchModelViewBuilder.ValueComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder

License requirements: None.

setDimInspectionType(Tag, UFDrf.InspectionType) - Method in interface nxopen.uf.UFDrf

Refer to UF_DRF_set_dim_inspection_type for documentation.

setDimLineSpaceFactor(double) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDimOriginCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use TrackDrawingChangesReportFilterBuilder.setReportFilterStatus(nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter, boolean) instead.

setDimReferenceType(Tag, UFDrf.ReferenceSymbolType) - Method in interface nxopen.uf.UFDrf

Refer to UF_DRF_set_dim_reference_type for documentation.

setDimRetainedStatusCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use TrackDrawingChangesReportFilterBuilder.setReportFilterStatus(nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter, boolean) instead.

setDimSizeCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use TrackDrawingChangesReportFilterBuilder.setReportFilterStatus(nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter, boolean) instead.

setDimToleranceTextSpaceFactor(double) - Method in interface nxopen.annotations.LetteringPreferences

Sets the dimension/tolerance text space factor
License requirements: None.

setDimToleranceTextSpaceFactor(Tag, double) - Method in interface nxopen.uf.UFDrf

Refer to UF_DRF_set_dim_tolerance_text_space_factor for documentation.

setDimZeroToleranceDisplayStyle(ZeroToleranceDisplayStyle) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDirectEngageRetractMode(TurnEngageRetractBuilder.DirectEngageRetractModes) - Method in interface nxopen.cam.TurnEngageRetractBuilder

License requirements: cam_base ("CAM BASE")
.

setDirection(Direction) - Method in interface nxopen.annotations.DimensionMeasurementBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING")
.

setDirection(Direction) - Method in interface nxopen.Axis

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setDirection(Vector3d) - Method in interface nxopen.blockstyler.ReverseDirection

License requirements: None.

setDirection(Direction) - Method in interface nxopen.cae.MeshPointProjectBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setDirection(Direction) - Method in interface nxopen.cae.optimization.TBSShapeLinkCondition

License requirements: cae_opt_toposhape ("NX Shape Optimization")
.

setDirection(Direction) - Method in interface nxopen.cae.xyplot.LineStyle3DSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setDirection(Direction) - Method in interface nxopen.cae.xyplot.PlateStyle3DSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setDirection(CamPathDir) - Method in interface nxopen.cam.PathCircularMotion

License requirements: cam_base ("CAM BASE")
.

setDirection(Direction) - Method in interface nxopen.cam.SurfaceRegions

License requirements: cam_base ("CAM BASE")
.

setDirection(TurnMoveToPointBuilder.DirectionTypes) - Method in interface nxopen.cam.TurnMoveToPointBuilder

License requirements: cam_base ("CAM BASE")
.

setDirection(TurnProbeInspectPointMoveBuilder.DirectionTypes) - Method in interface nxopen.cam.TurnProbeInspectPointMoveBuilder

License requirements: cam_base ("CAM BASE")
.

setDirection(TurnRoughFinishTestCut.DirectionTypes) - Method in interface nxopen.cam.TurnRoughFinishTestCut

License requirements: cam_base ("CAM BASE")
.

setDirection(Direction) - Method in interface nxopen.facet.BestFitAlignBuilder

Sets the plane or line direction
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_1 ("basic freeform modeling")
.

setDirection(Direction) - Method in interface nxopen.facet.ExtrudeFacetBodyBuilder

License requirements: studio_free_form ("STUDIO FREE FORM") OR die_engineering ("DIE ENGINEERING")
.

setDirection(Direction) - Method in interface nxopen.facet.ExtrudeProfileBuilder

License requirements: studio_free_form ("STUDIO FREE FORM") OR die_engineering ("DIE ENGINEERING")
.

setDirection(Vector3d) - Method in interface nxopen.features.CylinderBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setDirection(Direction) - Method in interface nxopen.features.DraftBuilder

Sets the smart direction for draft
License requirements: solid_modeling ("SOLIDS MODELING")
.

setDirection(Direction) - Method in interface nxopen.features.EmbossJoggle

Sets the direction for joggle
License requirements: solid_modeling ("SOLIDS MODELING")
.

setDirection(Direction) - Method in interface nxopen.features.EmbossLimit

Sets the direction for translation
License requirements: solid_modeling ("SOLIDS MODELING")
.

setDirection(Direction) - Method in interface nxopen.features.EmbossRegion

Sets the default direction
License requirements: solid_modeling ("SOLIDS MODELING")
.

setDirection(Direction) - Method in interface nxopen.features.EmbossSidewall

Sets the draw direction for sidewall
License requirements: solid_modeling ("SOLIDS MODELING")
.

setDirection(Direction) - Method in interface nxopen.features.ExtrudeBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDirection(IsoparametricCurvesBuilder.DirectionTypes) - Method in interface nxopen.features.IsoparametricCurvesBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDirection(Direction) - Method in interface nxopen.features.MoveFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDirection(boolean) - Method in interface nxopen.features.OffsetFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDirection(Direction) - Method in interface nxopen.features.OvercrownBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDirection(BendBuilder.BendDirectionOptions) - Method in interface nxopen.features.sheetmetal.BendBuilder

Sets the Bend Direction
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setDirection(Direction) - Method in interface nxopen.features.shipdesign.PillarBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setDirection(Direction) - Method in interface nxopen.features.shipdesign.PillarSystemBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setDirection(boolean) - Method in interface nxopen.features.shipdesign.TraceLinesBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setDirection(Vector3d) - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord

Deprecated.

Deprecated in NX8.5.0. Use CurveAnalysisDisplay .

setDirection(BlendSetbackBuilder.Directions) - Method in interface nxopen.geometricutilities.BlendSetbackBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDirection(boolean) - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setDirection(Direction) - Method in interface nxopen.mechatronics.BreakingConstraintBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setDirection(Direction) - Method in interface nxopen.mechatronics.DistanceSensorBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setDirection(Direction) - Method in interface nxopen.mechatronics.VirtualAxisBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setDirection(Direction) - Method in interface nxopen.motion.BushingDefine

License requirements: mechanisms ("MECHANISMS")
.

setDirection(ControlOutputBuilder.DirectionType) - Method in interface nxopen.motion.ControlOutputBuilder

License requirements: mechanisms ("MECHANISMS")
.

setDirection(Direction) - Method in interface nxopen.motion.VObject

License requirements: mechanisms ("MECHANISMS")
.

setDirection(KinematicAxisBuilder.AxisDirectionType) - Method in interface nxopen.sim.KinematicAxisBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setDirectional(boolean) - Method in interface nxopen.cam.CleanupSettings

License requirements: cam_base ("CAM BASE")
.

setDirectionAsString(String) - Method in interface nxopen.blockstyler.OrientXpress

License requirements: None.

setDirectionAtPoint(Direction) - Method in interface nxopen.geometricutilities.BridgeCurveConnectivity

License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_1 ("basic freeform modeling")
.

setDirectionAxis(Axis) - Method in interface nxopen.weld.DatumCommonBuilder

License requirements: ugweld ("UG WELD")
.

setDirectionAxisType(DmRotaryFloorFinishBuilder.DirectionType) - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder

License requirements: cam_base ("CAM BASE")
.

setDirectionCsys(CoordinateSystem) - Method in interface nxopen.cae.LaminateDrapingDataBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setDirectionFlag(DivideCurveBuilder.InputArcLengthDirectionFlag) - Method in interface nxopen.features.DivideCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setDirectionFlipped(boolean) - Method in interface nxopen.geometricutilities.BlendSetbackBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDirectionLength(double) - Method in interface nxopen.weld.DatumCommonBuilder

License requirements: ugweld ("UG WELD")
.

setDirectionOfAxis(Tag, double[]) - Method in interface nxopen.uf.UFSo

Refer to UF_SO_set_direction_of_axis for documentation.

setDirectionOfDirr(Tag, double[]) - Method in interface nxopen.uf.UFSo

Refer to UF_SO_set_direction_of_dirr for documentation.

setDirectionOption(LaminateDrapingDataBuilder.DrapingDirectionType) - Method in interface nxopen.cae.LaminateDrapingDataBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setDirectionOption(VelocityImpactDirection.DirectionType) - Method in interface nxopen.cae.responsesimulation.VelocityImpactDirection

License requirements: nx_response_anlys ("NX Response Analysis")
.

setDirectionOption(CircularBlendCurveBuilder.CylinderDirectionOption) - Method in interface nxopen.features.CircularBlendCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDirectionOption(EmbossJoggle.JoggleDirectionMethod) - Method in interface nxopen.features.EmbossJoggle

Sets the emboss joggle direction option
License requirements: solid_modeling ("SOLIDS MODELING")
.

setDirectionOption(FitSurfaceBuilder.DirectionType) - Method in interface nxopen.features.FitSurfaceBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setDirectionOption(SubdivisionExtrudeCageBuilder.DirectionType) - Method in interface nxopen.features.subdivision.SubdivisionExtrudeCageBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setDirectionOption(CurveAnalysisCombsBuilder.DirectionOptionType) - Method in interface nxopen.geometricanalysis.CurveAnalysisCombsBuilder

Deprecated.

Deprecated in NX8.5.0. Use CurveCurvatureAnalysis .

setDirectionOption(CurveAnalysisInflectionsBuilder.DirectionOptionType) - Method in interface nxopen.geometricanalysis.CurveAnalysisInflectionsBuilder

Deprecated.

Deprecated in NX8.5.0. Use GeometricAnalysis.CurveCurvatureAnalysisBuilder .

setDirectionOption(CurveAnalysisPeaksBuilder.DirectionOptionType) - Method in interface nxopen.geometricanalysis.CurveAnalysisPeaksBuilder

Deprecated.

Deprecated in NX8.5.0. Use GeometricAnalysis.CurveCurvatureAnalysis .

setDirectionOption(CurveAnalysisRecord.DirectionOptionType) - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord

Deprecated.

Deprecated in NX8.5.0. Use CurveAnalysisDisplay .

setDirectionOption(DieEngTrimAngleCheckBuilder.DirectionOptions) - Method in interface nxopen.tooling.DieEngTrimAngleCheckBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setDirectionOrientation(DatumAxisBuilder.DirectionOrientations) - Method in interface nxopen.features.DatumAxisBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setDirectionReversed(boolean) - Method in interface nxopen.facet.CurvatureBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setDirectionReversed(boolean) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setDirections(Vector3d, Vector3d) - Method in interface nxopen.CoordinateSystem

The orientation of the coordinate system
License requirements: None.

setDirectionSpecifiedEnum(InspectionConstructedFeatureBuilder.DirectionType) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDirectionType(BeamSection.DirectionOption) - Method in interface nxopen.cae.BeamSectionOrientationOptions

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDirectionType(BeamSection.DirectionOption) - Method in interface nxopen.cae.UserDefinedSolidBeamSectionBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDirectionType(GeometryGroup.DirectionTypes) - Method in interface nxopen.cam.GeometryGroup

License requirements: cam_base ("CAM BASE")
.

setDirectionType(ProbeInspectPointMoveBuilder.Direction) - Method in interface nxopen.cam.ProbeInspectPointMoveBuilder

License requirements: cam_base ("CAM BASE")
.

setDirectionType(ProbeInspectSurfacePointMoveBuilder.Direction) - Method in interface nxopen.cam.ProbeInspectSurfacePointMoveBuilder

License requirements: None.

setDirectionType(BrokenViewBuilder.TypeDirection) - Method in interface nxopen.drawings.BrokenViewBuilder

License requirements: None.

setDirectionType(JogBuilder.DirectionTypeOptions) - Method in interface nxopen.features.sheetmetal.JogBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setDirectionType(PenetrationRequest.DirectionType) - Method in interface nxopen.features.shipdesign.PenetrationAssociationBuilder

License requirements: nx_penetration_mgmt ("Penetration Management")
.

setDirectionType(PenetrationRequest.DirectionType) - Method in interface nxopen.features.shipdesign.PenetrationCutoutBuilder

License requirements: nx_penetration_mgmt ("Penetration Management")
.

setDirectionType(PenetrationRequest.DirectionType) - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder

License requirements: nx_penetration_mgmt ("Penetration Management")
.

setDirectionType(HelixPattern.DirectionTypes) - Method in interface nxopen.geometricutilities.HelixPattern

License requirements: None.

setDirectionType(SpiralPattern.OrientType) - Method in interface nxopen.geometricutilities.SpiralPattern

License requirements: None.

setDirectionType(SpeedPositionControlDirectiontype) - Method in interface nxopen.mechatronics.PositionControlBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setDirectionType(SpeedPositionControlDirectiontype) - Method in interface nxopen.mechatronics.SpeedControlBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setDirectionVector(Vector3d) - Method in interface nxopen.Axis

Sets the direction vector for a non-associative axis.

setDirectionVector(Direction) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDirectionVector(Direction) - Method in interface nxopen.drawings.BrokenViewBuilder

License requirements: None.

setDirectionVector(Direction) - Method in interface nxopen.features.AOCSBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.

setDirectionVector1(boolean) - Method in interface nxopen.weld.FilletBuilder

License requirements: ugweld ("UG WELD")
.

setDirectionVector2(boolean) - Method in interface nxopen.weld.FilletBuilder

License requirements: ugweld ("UG WELD")
.

setDirectionView(View) - Method in interface nxopen.annotations.DimensionMeasurementBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING")
.

setDirectToggle(boolean) - Method in interface nxopen.weld.FilletBuilder

License requirements: ugweld ("UG WELD")
.

setDirectTrimPoint(boolean) - Method in interface nxopen.cam.TurnEngageRetractBuilder

Deprecated.

Deprecated in NX10.0.2. Use CAM.TurnEngageRetractBuilder#directEngageRetractMode and CAM.TurnEngageRetractBuilder#setDirectEngageRetractMode instead.

setDirVector(Direction) - Method in interface nxopen.linedesigner.RailOpeningFeatureBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setDisabled() - Method in interface nxopen.CustomPopupMenuItem

Sets the menu disabled
License requirements: None.

setDiscipline(String) - Method in interface nxopen.drafting.DrawingCreationWizardBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setDispContact(boolean) - Method in interface nxopen.cam.DmBndBuilder

License requirements: None.

setDispContactNormal(boolean) - Method in interface nxopen.cam.DmBndBuilder

License requirements: None.

setDispCS(CoordinateSystem) - Method in interface nxopen.cae.AssignNodalCSBuilder

License requirements: None.

setDispCSType(AssignNodalCSBuilder.CSType) - Method in interface nxopen.cae.AssignNodalCSBuilder

License requirements: None.

setDispCsys(CoordinateSystem) - Method in interface nxopen.cae.NodeModifyLabelBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setDisplacement(double) - Method in interface nxopen.assemblies.PlaneSearchTermBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setDisplacement(double) - Method in interface nxopen.motion.DriverOperation

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using DriverOperation.displacementExpression() to query or edit it.

setDisplacementStepSize(TBSShapeOptimizationParameters.DisplacementStepsize) - Method in interface nxopen.cae.optimization.TBSShapeOptimizationParameters

License requirements: cae_opt_toposhape ("NX Shape Optimization")
.

setDisplay(boolean) - Method in interface nxopen.drawings.ViewSectionLineBuilder

License requirements: drafting ("DRAFTING")
.

setDisplay(BasePart, boolean, boolean) - Method in interface nxopen.PartCollection

Sets the displayed part.

setDisplay(int) - Method in interface nxopen.uf.UFDisp

Refer to UF_DISP_set_display for documentation.

setDisplayAlertsOnInformation(boolean) - Method in interface nxopen.preferences.SessionUserInterfaceUI

Sets the option "Display Alerts on Information" gives choice, whether the user wants the Diagnostic alerts appear when features contain information messages during feature creation, edit, and update.

setDisplayAlertsOnWarnings(boolean) - Method in interface nxopen.preferences.SessionUserInterfaceUI

Sets the option "Display Alerts on Warnings" gives choice, whether the user wants the Diagnostic alerts appear when features contain warnings during feature creation, edit, and update.

setDisplayAllTextInUpperCase(boolean) - Method in interface nxopen.annotations.HoleTableSettingsFormatBuilder

License requirements: drafting ("DRAFTING")
.

setDisplayAnchors(RoutingPath.DisplayObject) - Method in interface nxopen.preferences.RoutingPath

License requirements: routing_base ("Routing Basic")
.

setDisplayAppearance(ViewVisualizationVisual.DisplayAppearanceOptions) - Method in interface nxopen.preferences.ViewVisualizationVisual

Sets the rendering style and the edge display options of the view.

setDisplayArrowOnParentView(ViewProjectedViewSettingsBuilder.DisplayArrowOnParentViewType) - Method in interface nxopen.drawings.ViewProjectedViewSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setDisplayAsPmi(boolean) - Method in interface nxopen.features.EditDimensionBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDisplayAsSingleSided(boolean) - Method in interface nxopen.annotations.SingleSidedDisplayBuilder

License requirements: drafting ("DRAFTING")
.

setDisplayAutoDimensions(boolean) - Method in interface nxopen.preferences.SessionSketch

Sets the display auto dimensions preference
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setDisplayBanner(boolean) - Method in interface nxopen.PlotBuilder

License requirements: None.

setDisplayBitmapLabel(boolean) - Method in interface nxopen.blockstyler.Label

License requirements: None.

setDisplayBoltHoleCenterline(boolean) - Method in interface nxopen.cae.MeshCollectorDisplayDefaults2d

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDisplayBoltHoleCenterline(boolean) - Method in interface nxopen.cae.MeshDisplaySettings2d

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDisplayBorders(boolean) - Method in interface nxopen.drawings.ViewWorkflowBuilder

License requirements: drafting ("DRAFTING")
.

setDisplayBorders(boolean) - Method in interface nxopen.preferences.PartDrafting

Sets the flag indicating whether to display borders around drafting views, when selected
License requirements: None.

setDisplayByTime(boolean) - Method in interface nxopen.cam.SimulationOptionsBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setDisplayCenterOfRotation(boolean) - Method in interface nxopen.preferences.SessionVisualizationScreen

Sets whether a graphic representing the center of rotation is displayed during interactive view rotation.

setDisplayCgOption(boolean) - Method in interface nxopen.cae.SolidPropertyCheckBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setDisplayChangeSymbol(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use TrackDrawingChangesGeneralBuilder.setDisplayChangeSymbol(boolean) instead.

setDisplayChangeSymbol(boolean) - Method in interface nxopen.drawings.TrackDrawingChangesGeneralBuilder

License requirements: drafting ("DRAFTING")
.

setDisplayComponent(Component) - Method in interface nxopen.positioning.Network

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setDisplayConnectedPorts(RoutingPath.DisplayObject) - Method in interface nxopen.preferences.RoutingPath

Display connected ports in the model
License requirements: routing_base ("Routing Basic")
.

setDisplayConstraints(boolean) - Method in interface nxopen.assemblies.PositioningGroup

License requirements: nx_4gd_integration ("4th Generation Design")
.

setDisplayConstraints(boolean) - Method in interface nxopen.assemblies.PositioningTask

License requirements: nx_4gd_integration ("4th Generation Design")
.

setDisplayConstraints(boolean) - Method in interface nxopen.positioning.ComponentPositioner

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setDisplayConstraintSymbols(boolean) - Method in interface nxopen.preferences.SessionSketch

Sets the display constraint symbols preference
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setDisplayConstructionGeometry(boolean) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setDisplayContinuationNote(TableSectionStyleBuilder.DisplayContinuationNoteType) - Method in interface nxopen.annotations.TableSectionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDisplayContouring(boolean) - Method in interface nxopen.cae.xyplot.BaseGridLayoutStyleSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setDisplayCrosshatch(boolean) - Method in interface nxopen.annotations.LightweightSectionBuilder

License requirements: geometric_tol ("GDT")
.

setDisplayCrosshatch(boolean) - Method in interface nxopen.annotations.RegionBuilder

License requirements: geometric_tol ("GDT")
.

setDisplayCsys(boolean) - Method in interface nxopen.weld.JointmarkBuilder

Indicates whether the csys should be displayed on creation
License requirements: ugweld ("UG WELD")
.

setDisplayCurveCurvatureOutside(boolean) - Method in interface nxopen.preferences.PartModeling

Sets the curve curvature display style to show it on the inside/outside of the curve
License requirements: None.

setDisplayCutRegionsFlag(boolean) - Method in interface nxopen.cam.OperationDisplayOptionsBuilder

License requirements: cam_base ("CAM BASE")
.

setDisplayCuttingPlaneSymbol(boolean) - Method in interface nxopen.annotations.CuttingPlaneSymbolBuilder

License requirements: geometric_tol ("GDT")
.

SetDisplayData() - Constructor for class nxopen.PartCollection.SetDisplayData

setDisplayDeletedGridPoints(boolean) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setDisplayDialogsInPlayback(boolean) - Method in interface nxopen.preferences.SessionUserInterfaceUI

Sets the display dialogs in playback flag
License requirements: None.

setDisplayDimensionLine(OrdinateLineArrowDisplayOption) - Method in interface nxopen.annotations.OrdinateStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDisplayDOFArrows(boolean) - Method in interface nxopen.preferences.SessionSketch

Sets the displays DOF arrows flag.

setDisplayedPart(BasePart) - Method in interface nxopen.tooling.MWDefineSheetsBuilder

Set displayed part
License requirements: None.

setDisplayEffectivityFilterNodesInPartNavigator(boolean) - Method in interface nxopen.annotations.PmiPreferences

License requirements: nx_pmi_effectivity ("NX PMI EFFECTIVITY")
.

setDisplayExcludedDesignElements(boolean) - Method in interface nxopen.assemblies.Subset

License requirements: nx_4gd_integration ("4th Generation Design")
.

setDisplayFilter(ElectricalFormat.Type, ElectricalNavigatorFilter) - Method in interface nxopen.routing.electrical.ElectricalNavigatorFilterCollection

Set the ElectricalNavigatorFilter object as displayed filter for given navigator type.

setDisplayFitParentheses(boolean) - Method in interface nxopen.annotations.DimensionPreferences

Sets the flag indicating whether to display parentheses for fit tolerance.

setDisplayFitSeparator(boolean) - Method in interface nxopen.annotations.DimensionPreferences

Sets the flag indicating whether to display separator for fit tolerance of assembly dimensions.

setDisplayFlowParamsEnabled(boolean) - Method in interface nxopen.routing.DuctSizeCalculatorBuilder

License requirements: routing_hvac ("Routing HVAC")
.

setDisplayForce(boolean) - Method in interface nxopen.cae.FreeBodyResultsBuilder

Display Force
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDisplayFormat(ElectricalFormat.Type, ElectricalFormat) - Method in interface nxopen.routing.electrical.ElectricalFormatCollection

Set the ElectricalFormat object as displayed format for the given navigator type.

setDisplayGouges(boolean) - Method in interface nxopen.cam.CutDepthChecker

License requirements: cam_base ("CAM BASE")
.

setDisplayGrid(int, int) - Method in interface nxopen.cae.SimBCDisplay

Sets the number of sample points for BC display in first and second parametric direction for a face.

setDisplayGridToggle(boolean) - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setDisplayHoles(boolean) - Method in interface nxopen.die.DrawDiePunchBuilder

Sets the display holes switch of the draw die punch casting, if true holes will be created in the punch, if false holes will not be created.

setDisplayHoles(boolean) - Method in interface nxopen.die.HoleChildBuilder

Sets the display holes switch of the die hole, if true the hole will be built into the model, if false it will not.

setDisplayHoles(boolean) - Method in interface nxopen.die.HoleParentBuilder

Sets the display holes switch of die holes, if true the holes will be built into the model, if false they will not.

setDisplayHoles(boolean) - Method in interface nxopen.die.PierceHoleChildBuilder

Sets the display holes option of the pierce hole
License requirements: ug_die_design ("Die Design")
.

setDisplayHoles(boolean) - Method in interface nxopen.die.PierceHoleParentBuilder

Sets the display holes option of pierce holes
License requirements: ug_die_design ("Die Design")
.

setDisplayHoles(boolean) - Method in interface nxopen.die.RotorBuilder

Sets the display holes of the rotor casting.

setDisplayHoles(boolean) - Method in interface nxopen.die.SteelInsertBuilder

Sets the display holes of the diesteelinsert
License requirements: ug_die_design ("Die Design")
.

setDisplayIcon(String) - Method in interface nxopen.blockstyler.Node

License requirements: None.

setDisplayId(GeneralDisplayIdOption) - Method in interface nxopen.drawings.GeneralViewStyle

Sets the display identifier option for a member view.

setDisplayId(GeneralDisplayIdOption) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder

License requirements: drafting ("DRAFTING")
.

setDisplayId(GeneralDisplayIdOption) - Method in interface nxopen.preferences.GeneralViewPreferences

Sets the display identifier option for a member view.

setDisplayInformation(boolean) - Method in interface nxopen.STLImporter

Sets the Display Information flag.

setDisplayInterferenceResult(boolean) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setDisplayInternalEdges(boolean) - Method in interface nxopen.cae.MeshCollectorDisplayDefaults3d

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDisplayInternalEdges(boolean) - Method in interface nxopen.cae.MeshDisplaySettings3d

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDisplayIntersectionCurves(boolean) - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setDisplayJisrotationLetter(boolean) - Method in interface nxopen.drawings.SectionLineStyleBuilder

Deprecated.

Deprecated in NX10.0.0. Use ViewSectionLineBuilder.setDisplayRotationLetter(boolean) instead.

setDisplayLabel(boolean) - Method in interface nxopen.drawings.SectionLineStyleBuilder

Deprecated.

Deprecated in NX10.0.0. Use ViewSectionLineBuilder.setDisplay(boolean) instead.

setDisplayLabel(ViewProjectedArrowSettingsBuilder.DispalyLabelType) - Method in interface nxopen.drawings.ViewProjectedArrowSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setDisplayLeadingDimensionZeros(boolean) - Method in interface nxopen.annotations.UnitsStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDisplayLeadingToleranceZeros(boolean) - Method in interface nxopen.annotations.UnitsStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDisplayLegacyFeatureName(boolean) - Method in interface nxopen.preferences.SessionModeling

License requirements: None.

setDisplayLettersOnBends(boolean) - Method in interface nxopen.drawings.ViewSectionLineBuilder

License requirements: drafting ("DRAFTING")
.

setDisplayLineBetweenArrows(boolean) - Method in interface nxopen.annotations.DimensionPreferences

Sets the flag indicating whether to display line between arrows
License requirements: None.

setDisplayMagnitudeProperty(String) - Method in interface nxopen.cae.SimBCDisplay

Sets the neutral name of the property that will control the display
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDisplayMarkerOfPoint(Tag, UFDisp.PolyMarker) - Method in interface nxopen.uf.UFSo

Refer to UF_SO_set_display_marker_of_point for documentation.

setDisplayMethod(HighlightLinesAnalysisBuilder.DisplayMethods) - Method in interface nxopen.geometricanalysis.HighlightLinesAnalysisBuilder

Deprecated.

Deprecated in NX8.0.0. Use HighlightLinesAnalysisBuilder.type2() and HighlightLinesAnalysisBuilder.setType2(nxopen.geometricanalysis.HighlightLinesAnalysisBuilder.Types2) instead.

setDisplayMode(SimBCDisplay.Mode) - Method in interface nxopen.cae.SimBCDisplay

Sets the BC display mode
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDisplayMode(DistanceAnalysisBuilder.DisplayModes) - Method in interface nxopen.geometricanalysis.DistanceAnalysisBuilder

License requirements: None.

setDisplayMode(RadiusAnalysisBuilder.DisplayModes) - Method in interface nxopen.geometricanalysis.RadiusAnalysisBuilder

License requirements: None.

setDisplayMode(SlopeAnalysisBuilder.DisplayModes) - Method in interface nxopen.geometricanalysis.SlopeAnalysisBuilder

License requirements: None.

setDisplayMode(SubdivisionModelingPreferences.DisplayModes) - Method in interface nxopen.preferences.SubdivisionModelingPreferences

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setDisplayModes(Tag, String, int, int, int, int, int, int, double) - Method in interface nxopen.uf.UFPlist

Deprecated.

The equivalent Open C method has retired

setDisplayMoment(boolean) - Method in interface nxopen.cae.FreeBodyResultsBuilder

Display Moment
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDisplayName(boolean) - Method in interface nxopen.cae.responsesimulation.RSDisplayObject

Sets the true/false flag based on whether the name of the BC is displayed in the graphics window
License requirements: nx_response_anlys ("NX Response Analysis")
.

setDisplayName(String) - Method in interface nxopen.cam.CAMAttribute

License requirements: cam_base ("CAM BASE")
.

setDisplayName(String) - Method in interface nxopen.report.BaseArgument

License requirements: None.

setDisplayName(String) - Method in interface nxopen.report.CommandBuilder

License requirements: None.

setDisplayName(String) - Method in interface nxopen.report.IUserItem

Sets the display name.

setDisplayNameStyle(OrdinateOriginDisplayOption) - Method in interface nxopen.annotations.OrdinateStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDisplayObjectColor(boolean) - Method in interface nxopen.preferences.SessionSketch

Sets the display object color
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setDisplayObjectColor(boolean) - Method in interface nxopen.preferences.SketchPreferences

Sets the toggle that controls whether objects are displayed in their actual color in sketch
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setDisplayObjectName(boolean) - Method in interface nxopen.preferences.SessionSketch

Sets the display object name
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setDisplayObjectName(boolean) - Method in interface nxopen.preferences.SketchPreferences

Sets the toggle that controls whether objects are displayed with their names in sketch
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setDisplayOnSegments(boolean) - Method in interface nxopen.routing.BranchPathNumberingBuilder

License requirements: routing_hvac ("Routing HVAC")
.

setDisplayOption(DisplaySolidBuilder.DisplayOptionTypes) - Method in interface nxopen.features.shipdesign.DisplaySolidBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setDisplayPart(Tag) - Method in interface nxopen.uf.UFPart

Refer to UF_PART_set_display_part for documentation.

setDisplayPartBodyName(boolean) - Method in interface nxopen.annotations.HoleTableSettingsFormatBuilder

License requirements: drafting ("DRAFTING")
.

setDisplayPartImport(TaggedObject) - Method in interface nxopen.tooling.BlankGeneratorBuilder

License requirements: None.

setDisplayPartSelect(TaggedObject) - Method in interface nxopen.tooling.BlankGeneratorBuilder

License requirements: None.

setDisplayPmiAssociatedComponentsLoadedForReference(boolean) - Method in interface nxopen.annotations.PmiPreferences

License requirements: nx_pmi_effectivity ("NX PMI EFFECTIVITY")
.

setDisplayPmiEffectivityMethod(DisplayPmiEffectivityMethod) - Method in interface nxopen.annotations.PmiPreferences

License requirements: nx_pmi_effectivity ("NX PMI EFFECTIVITY")
.

setDisplayPmiEffectivityReferenceMethod(DisplayPmiEffectivityMethod) - Method in interface nxopen.annotations.PmiPreferences

License requirements: nx_pmi_effectivity ("NX PMI EFFECTIVITY")
.

setDisplayPmiQueryDialogFromMb3(boolean) - Method in interface nxopen.annotations.PmiPreferences

Sets the PMI query dialog visibility from mb3 option
License requirements: None.

setDisplayPortLength(double) - Method in interface nxopen.preferences.RoutingPath

License requirements: routing_base ("Routing Basic")
.

setDisplayPorts(RoutingPath.DisplayObject) - Method in interface nxopen.preferences.RoutingPath

Display ports in the model?

setDisplayRcps(RoutingPath.DisplayObject) - Method in interface nxopen.preferences.RoutingPath

License requirements: routing_base ("Routing Basic")
.

setDisplayRegion(boolean) - Method in interface nxopen.drafting.AutomationPreferencesBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setDisplayRegionLabel(boolean) - Method in interface nxopen.drafting.AutomationPreferencesBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setDisplayRegionLabel(boolean) - Method in interface nxopen.drawings.AutomationTemplateRegionBuilder

License requirements: drafting ("DRAFTING")
.

setDisplayResolution(DisplayPropertiesBuilder.DispResolutionEnum) - Method in interface nxopen.fields.DisplayPropertiesBuilder

License requirements: None.

setDisplayResourceBarOption(SessionUserInterfaceUI.DisplayResourceBar) - Method in interface nxopen.preferences.SessionUserInterfaceUI

Sets the display resource bar option
License requirements: None.

setDisplayRotatedItems(boolean) - Method in interface nxopen.die.FlangeTaskBuilder

Sets the display rotated items setting of the flange task.

setDisplayRotationLetter(boolean) - Method in interface nxopen.drawings.ViewSectionLineBuilder

License requirements: drafting ("DRAFTING")
.

setDisplayScale(double) - Method in interface nxopen.features.WaveDatumBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setDisplayScale(double) - Method in interface nxopen.motion.CurveContactBuilder

License requirements: mechanisms ("MECHANISMS")
.

setDisplayScale(double) - Method in interface nxopen.motion.JointDefine

Sets the display scale
License requirements: mechanisms ("MECHANISMS")
.

setDisplayScale(double) - Method in interface nxopen.motion.MarkerBuilder

License requirements: mechanisms ("MECHANISMS")
.

setDisplayScale(double) - Method in interface nxopen.motion.MotionBuilder

Sets the icon display scale
License requirements: mechanisms ("MECHANISMS")
.

setDisplayScale(double) - Method in interface nxopen.motion.MotionObject

Sets the display scale factor
License requirements: mechanisms ("MECHANISMS")
.

setDisplayScale(double) - Method in interface nxopen.motion.VObject

License requirements: mechanisms ("MECHANISMS")
.

setDisplayScaleFactor(double) - Method in interface nxopen.features.DatumCsysBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setDisplaySection(DisplaySectionType) - Method in interface nxopen.cae.MeshCollectorDisplayDefaults1d

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDisplaySection(DisplaySectionType) - Method in interface nxopen.cae.MeshDisplaySettings1d

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDisplaySectionEndRelease(boolean) - Method in interface nxopen.cae.MeshCollectorDisplayDefaults1d

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDisplaySectionEndRelease(boolean) - Method in interface nxopen.cae.MeshDisplaySettings1d

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDisplaySectioning(Matrix3x3, Point3d, double[], ModelingView.OtherSectionAttrT) - Method in interface nxopen.ModelingView

Deprecated.

Deprecated in NX5.0.0. Use ModelingView.setActiveDynamicSection(nxopen.display.DynamicSection) instead.

setDisplaySectioningToggle(boolean) - Method in interface nxopen.ModelingView

License requirements: None.

setDisplaySectionLine(boolean) - Method in interface nxopen.drawings.SectionViewStyle

Sets the status of display section line.

setDisplaySectionLine(boolean) - Method in interface nxopen.drawings.ViewStyleSectionBuilder

License requirements: drafting ("DRAFTING")
.

setDisplaySectionMappingWarning(boolean) - Method in interface nxopen.preferences.SessionSketch

Sets the display section mapping warning flag.

setDisplaySectionOrientation(boolean) - Method in interface nxopen.cae.MeshCollectorDisplayDefaults1d

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDisplaySectionOrientation(boolean) - Method in interface nxopen.cae.MeshDisplaySettings1d

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDisplaySectionOrientationVector(boolean) - Method in interface nxopen.cae.MeshCollectorDisplayDefaults1d

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDisplaySectionOrientationVector(boolean) - Method in interface nxopen.cae.MeshDisplaySettings1d

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDisplaySegmentConstraints(RoutingPath.DisplayObject) - Method in interface nxopen.preferences.RoutingPath

License requirements: routing_base ("Routing Basic")
.

setDisplaySelectedObjects(boolean) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setDisplaySettingsData(DuplicateElementsCheckBuilder.DisplaySettings) - Method in interface nxopen.cae.modelcheck.DuplicateElementsCheckBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDisplaySettingsData(DuplicateNodesCheckBuilder.DisplaySettings) - Method in interface nxopen.cae.modelcheck.DuplicateNodesCheckBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDisplayShadedEdges(boolean) - Method in interface nxopen.cae.MeshCollectorDisplayDefaults2d

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDisplayShadedEdges(boolean) - Method in interface nxopen.cae.MeshCollectorDisplayDefaults3d

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDisplayShadedEdges(boolean) - Method in interface nxopen.cae.MeshDisplaySettings2d

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDisplayShadedEdges(boolean) - Method in interface nxopen.cae.MeshDisplaySettings3d

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDisplaySheetSizeInBorder(boolean) - Method in interface nxopen.drawings.SheetBorderSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setDisplayState(int) - Method in interface nxopen.uf.UFDraw

Refer to UF_DRAW_set_display_state for documentation.

setDisplayStationary(SimulationOptionsBuilder.Stationary) - Method in interface nxopen.cam.SimulationOptionsBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setDisplayStatus(boolean) - Method in interface nxopen.die.CastReliefParentBuilder

Sets the display status of cast relief, if true input data to the cast relief will be displayed, if false the input data will not be displayed.

setDisplayStatus(boolean) - Method in interface nxopen.die.ConnectProfileParentBuilder

Sets the display status of die pierce holes
License requirements: ug_die_design ("Die Design")
.

setDisplayStatus(boolean) - Method in interface nxopen.die.DeckParentBuilder

Sets the display status of deck, if true input data to the deck will be displayed, if false the input data will not be displayed.

setDisplayStatus(boolean) - Method in interface nxopen.die.DrawDiePunchSectionBuilder

License requirements: ug_die_design ("Die Design")
.

setDisplayStatus(boolean) - Method in interface nxopen.die.FlangeSteelRibChildBuilder

Sets the display status of the Flange Steel Rib
License requirements: ug_die_design ("Die Design")
.

setDisplayStatus(boolean) - Method in interface nxopen.die.FlangeSteelRibParentBuilder

Sets the display status of the Flange Steel Ribs
License requirements: ug_die_design ("Die Design")
.

setDisplayStatus(boolean) - Method in interface nxopen.die.HandlingCoreChildBuilder

Sets the display status of the handling core, if true input data to the handling core will be displayed, if false the input data will not be displayed.

setDisplayStatus(boolean) - Method in interface nxopen.die.HandlingCoreParentBuilder

Sets the display status of handling cores, if true input data to the handling cores will be displayed, if false the input data will not be displayed.

setDisplayStatus(boolean) - Method in interface nxopen.die.HoleChildBuilder

Sets the display status of the die hole, if true input data to the hole will be displayed, if false the input data will not be displayed.

setDisplayStatus(boolean) - Method in interface nxopen.die.HoleParentBuilder

Sets the display status of die holes, if true input data to the holes will be displayed, if false the input data will not be displayed.

setDisplayStatus(boolean) - Method in interface nxopen.die.KeywayChildBuilder

Sets the display status of the keyway, if true input data to the keyway will be displayed, if false the input data will not be displayed.

setDisplayStatus(boolean) - Method in interface nxopen.die.KeywayParentBuilder

Sets the display status of keyways, if true input data to the keyways will be displayed, if false the input data will not be displayed.

setDisplayStatus(boolean) - Method in interface nxopen.die.PadChildBuilder

Sets the display status of the die pad, if true input data to the pad will be displayed, if false the input data will not be displayed.

setDisplayStatus(boolean) - Method in interface nxopen.die.PadParentBuilder

Sets the display status of die pads, if true input data to the pads will be displayed, if false the input data will not be displayed.

setDisplayStatus(boolean) - Method in interface nxopen.die.PierceHoleChildBuilder

Sets the display status of the pierce hole
License requirements: ug_die_design ("Die Design")
.

setDisplayStatus(boolean) - Method in interface nxopen.die.PierceHoleParentBuilder

Sets the display status of pierce holes
License requirements: ug_die_design ("Die Design")
.

setDisplayStatus(boolean) - Method in interface nxopen.die.PointChildBuilder

Sets the display status of the point, if true input data to the point will be displayed, if false the input data will not be displayed.

setDisplayStatus(boolean) - Method in interface nxopen.die.PointParentBuilder

Sets the display status of points, if true input data to the points will be displayed, if false the input data will not be displayed.

setDisplayStatus(boolean) - Method in interface nxopen.die.PressureSystemChildBuilder

Sets the display status of the pressure system, if true input data to the pressure system will be displayed, if false the input data will not be displayed.

setDisplayStatus(boolean) - Method in interface nxopen.die.PressureSystemParentBuilder

Sets the display status of pressure systems, if true input data to the pressure systems will be displayed, if false the input data will not be displayed.

setDisplayStatus(boolean) - Method in interface nxopen.die.RibChildBuilder

Sets the display status of the die rib, if true input data to the rib will be displayed, if false the input data will not be displayed.

setDisplayStatus(boolean) - Method in interface nxopen.die.RibParentBuilder

Sets the display status of die ribs, if true input data to the ribs will be displayed, if false the input data will not be displayed.

setDisplayStatus(boolean) - Method in interface nxopen.die.RotorSectionBuilder

Sets the display status of the die rotor casting
License requirements: ug_die_design ("Die Design")
.

setDisplayStatus(boolean) - Method in interface nxopen.die.SteelInsertSegmentChildBuilder

Sets the display status of die sisegs
License requirements: ug_die_design ("Die Design")
.

setDisplayStatus(boolean) - Method in interface nxopen.die.SteelInsertSegmentParentBuilder

Sets the display status of die sisegs
License requirements: ug_die_design ("Die Design")
.

setDisplayStatus(boolean) - Method in interface nxopen.die.ThroatChildBuilder

Sets the display status of the throat section, if true input data to the throat section will be displayed, if false the input data will not be displayed.

setDisplayStatus(boolean) - Method in interface nxopen.die.ThroatParentBuilder

Sets the display status of the throat sections, if true input data to the throat sections will be displayed, if false the input data will not be displayed.

setDisplayStatus(boolean) - Method in interface nxopen.die.WearPlateLocChildBuilder

Sets the display status of wear plate and locators
License requirements: ug_die_design ("Die Design")
.

setDisplayStatus(boolean) - Method in interface nxopen.die.WearPlateLocParentBuilder

Sets the display status of wear plate and locators
License requirements: ug_die_design ("Die Design")
.

setDisplayStyle(OffsetCenterPointBuilder.Display) - Method in interface nxopen.annotations.OffsetCenterPointBuilder

License requirements: drafting ("DRAFTING")
.

setDisplayStyle(PostAnnotation.Style) - Method in interface nxopen.cae.PostAnnotation

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDisplayStyle(GroupLabel.DisplayStyleOption) - Method in interface nxopen.visualreporting.GroupLabel

License requirements: nx_visual_reporting ("Visual Reporting")
.

setDisplayStyleForGroupLabel(GroupLabel, GroupLabel.DisplayStyleOption) - Method in interface nxopen.visualreporting.VisualReportBuilder

Sets the GroupLabel.DisplayStyleOption of the given GroupLabel
License requirements: None.

setDisplaySuppressedConstraints(boolean) - Method in interface nxopen.assemblies.PositioningGroup

License requirements: nx_4gd_integration ("4th Generation Design")
.

setDisplaySuppressedConstraints(boolean) - Method in interface nxopen.assemblies.PositioningTask

License requirements: nx_4gd_integration ("4th Generation Design")
.

setDisplaySuppressedConstraints(boolean) - Method in interface nxopen.positioning.ComponentPositioner

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setDisplayTechnique(ModelingViewHighQualityImage.DisplayTechniqueType) - Method in interface nxopen.ModelingViewHighQualityImage

Sets the display technique to use for the generation of the High Quality Image.

setDisplayTemplatePart(boolean) - Method in interface nxopen.drawings.AutomationTemplateRegionBuilder

License requirements: drafting ("DRAFTING")
.

setDisplayTemporaryPoint(boolean) - Method in interface nxopen.blockstyler.SpecifyLocation

License requirements: None.

setDisplayText(String) - Method in interface nxopen.blockstyler.Node

License requirements: None.

setDisplayText(boolean) - Method in interface nxopen.cae.MeshCollectorDisplayDefaults0d

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDisplayText(boolean) - Method in interface nxopen.cae.MeshCollectorDisplayDefaults1d

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDisplayText(boolean) - Method in interface nxopen.cae.MeshDisplaySettings0d

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDisplayText(boolean) - Method in interface nxopen.cae.MeshDisplaySettings1d

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDisplayThickShell(boolean) - Method in interface nxopen.cae.MeshCollectorDisplayDefaults2d

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDisplayThickShell(boolean) - Method in interface nxopen.cae.MeshDisplaySettings2d

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDisplayTrailingZeros(boolean) - Method in interface nxopen.annotations.UnitsFormatPreferences

Sets the flag indicating whether to display trailing zeros on dimension values
License requirements: None.

setDisplayTrailingZeros(boolean) - Method in interface nxopen.annotations.UnitsStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDisplayTransform(InspectionMeasDataBuilder.DisplayTransformTypes) - Method in interface nxopen.cam.InspectionMeasDataBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDisplayTurningIpw(boolean) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setDisplayType(ReverseShellElementNormalBuilder.DisplayTypeValue) - Method in interface nxopen.cae.modelcheck.ReverseShellElementNormalBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDisplayType(FaceCurvatureAnalysisBuilder.DisplayTypes) - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setDisplayUniqueInputsToMap(boolean) - Method in interface nxopen.features.ReplaceFeatureBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDisplayUpdateReport(boolean) - Method in interface nxopen.preferences.SessionAssemblies

Sets the display update report option
License requirements: None.

setDisplayValue(String) - Method in interface nxopen.pdm.EffectivityAttributePropertiesBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setDisplayValueType(PostAnnotation.ValueType) - Method in interface nxopen.cae.PostAnnotation

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDisplayVertices(boolean) - Method in interface nxopen.preferences.SessionSketch

Sets the display sketch vertices toggle
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setDisplayVertices(boolean) - Method in interface nxopen.preferences.SketchPreferences

Sets the toggle that controls whether vertices are displayed in active sketch
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setDisposition(CompanionResultBuilder.CompanionResultDisposition) - Method in interface nxopen.cae.CompanionResultBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setDispParms(int) - Method in interface nxopen.uf.UFDrf

Refer to UF_DRF_set_disp_parms for documentation.

setDispToolEnd(boolean) - Method in interface nxopen.cam.DmBndBuilder

License requirements: None.

setDistance(double) - Method in interface nxopen.annotations.HatchBuilder

Deprecated.

Deprecated in NX7.5.0. Use HatchFillSettingsBuilder instead.

setDistance(double) - Method in interface nxopen.annotations.HatchFillSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setDistance(double) - Method in interface nxopen.annotations.OffsetCenterPointBuilder

License requirements: drafting ("DRAFTING")
.

setDistance(double) - Method in interface nxopen.assemblies.ProximitySearchTermBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setDistance(double) - Method in interface nxopen.assemblies.RunContentProximitySearchTermBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setDistance(double) - Method in interface nxopen.cam.AlongToolAxisMoveBuilder

License requirements: None.

setDistance(double) - Method in interface nxopen.cam.BoundaryTurnMemberCorner

License requirements: cam_base ("CAM BASE")
.

setDistance(double) - Method in interface nxopen.cam.BoundaryTurnMemberFineFinishCorner

License requirements: cam_base ("CAM BASE")
.

setDistance(double) - Method in interface nxopen.cam.BoundaryTurnMemberOffset

License requirements: cam_base ("CAM BASE")
.

setDistance(double) - Method in interface nxopen.cam.CycleTipRelease

License requirements: cam_base ("CAM BASE")
.

setDistance(double) - Method in interface nxopen.cam.InPathEventDataBuilder

License requirements: cam_base ("CAM BASE")
.

setDistance(double) - Method in interface nxopen.cam.LaserLinearMove

License requirements: cam_base ("CAM BASE")
.

setDistance(double) - Method in interface nxopen.cam.MinCutDepth

License requirements: cam_base ("CAM BASE")
.

setDistance(double) - Method in interface nxopen.cam.MinCutLength

License requirements: cam_base ("CAM BASE")
.

setDistance(double) - Method in interface nxopen.cam.NormalToToolAxisMoveBuilder

License requirements: None.

setDistance(double) - Method in interface nxopen.cam.PitchSetting

License requirements: cam_base ("CAM BASE")
.

setDistance(double) - Method in interface nxopen.cam.ReliefCut

License requirements: cam_base ("CAM BASE")
.

setDistance(double) - Method in interface nxopen.cam.ReliefPlunge

License requirements: cam_base ("CAM BASE")
.

setDistance(double) - Method in interface nxopen.cam.StopPosition

License requirements: cam_base ("CAM BASE")
.

setDistance(double) - Method in interface nxopen.cam.TurnEngageRetractBuilder

License requirements: cam_base ("CAM BASE")
.

setDistance(double) - Method in interface nxopen.cam.TurnOverlap

License requirements: cam_base ("CAM BASE")
.

setDistance(double) - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder

License requirements: cam_base ("CAM BASE")
.

setDistance(double) - Method in interface nxopen.cam.VectorDistanceMoveBuilder

License requirements: None.

setDistance(double) - Method in interface nxopen.cam.VerticalPosition

License requirements: cam_base ("CAM BASE")
.

setDistance(String) - Method in interface nxopen.features.EmbossLimit

The default distance expression formula string for offset or translation
License requirements: solid_modeling ("SOLIDS MODELING")
.

setDistance(String) - Method in interface nxopen.features.EmbossTarget

The distance expression formula string for offset or translation
License requirements: solid_modeling ("SOLIDS MODELING")
.

setDistanceAlignmentVector(Vector3d) - Method in interface nxopen.features.MeshSurfaceBuilder

Set distance alignment vector
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

setDistanceAngleDivision(int) - Method in interface nxopen.cam.InspectionOperationTransformBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDistanceAngleDivision(int) - Method in interface nxopen.cam.OperationTransformBuilder

License requirements: cam_base ("CAM BASE")
.

setDistanceBetweenAnnotations(double) - Method in interface nxopen.drafting.AutomationPreferencesBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setDistanceBetweenPointsMeasurePoint(Point) - Method in interface nxopen.geometricutilities.ModlMotion

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setDistanceBetweenPointsOriginPoint(Point) - Method in interface nxopen.geometricutilities.ModlMotion

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setDistanceBetweenPointsVector(Direction) - Method in interface nxopen.geometricutilities.ModlMotion

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setDistanceBetweenSymbolAndDimensionText(double) - Method in interface nxopen.annotations.DiameterRadiusPreferences

Sets the distance between diameter/radius symbol and dimension text
License requirements: None.

setDistanceEnum(CorrelFineTuneAlignmentBuilder.DistanceVector) - Method in interface nxopen.cae.CorrelFineTuneAlignmentBuilder

License requirements: nx_correl_base ("FE Correlation")
.

setDistanceFromBoundary(double) - Method in interface nxopen.cam.BoundaryTurnVariableStockSet

License requirements: cam_base ("CAM BASE")
.

setDistanceFromEnd(String) - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. Use WeldGrooveBuilder.endDistance() instead.

setDistanceFromEnds(double) - Method in interface nxopen.weld.AutoPointBuilder

License requirements: ugweld ("UG WELD")
.

setDistanceFromInnerBorder(double) - Method in interface nxopen.drawings.SheetBorderSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setDistanceFromStart(String) - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. Use WeldGrooveBuilder.startDistance() instead.

setDistanceFromViewPlane(ViewCopyTo3dBuilder.DistanceFromViewPlaneOption) - Method in interface nxopen.drawings.ViewCopyTo3dBuilder

License requirements: nx_layout ("NX Layout")
.

setDistanceLimit(double) - Method in interface nxopen.cam.ToolPathDivideBuilder

License requirements: None.

setDistanceLock(boolean) - Method in interface nxopen.routing.OverstockBuilder

License requirements: routing_advanced ("Routing Advanced") OR routing_harness ("Routing Harness") OR routing_cabling ("Routing Cabling") OR routing_pipetube ("Routing Piping and Tubing") OR routing_hvac ("Routing HVAC") OR routing_platform ("Routing Platform") OR routing_pid ("Routing PID")
.

setDistanceOption(ElementExtrudeBuilder.DistanceType) - Method in interface nxopen.cae.ElementExtrudeBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setDistanceOption(ElementTranslateBuilder.DistanceType) - Method in interface nxopen.cae.ElementTranslateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setDistanceOption(NodeRotateBuilder.DistanceType) - Method in interface nxopen.cae.NodeRotateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setDistanceOption(NodeTranslateBuilder.DistanceType) - Method in interface nxopen.cae.NodeTranslateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setDistanceThreshold(double) - Method in interface nxopen.features.IsoclineCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setDistanceThreshold(double) - Method in interface nxopen.features.OptimizeCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDistanceThreshold(boolean, String) - Method in interface nxopen.preferences.PartSheetmetal

THE distance threshold
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setDistanceToEdgeMidpoint(double) - Method in interface nxopen.tooling.WireHoleBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setDistanceTol(double) - Method in interface nxopen.features.SphericalCornerBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDistanceTolerance(double) - Method in interface nxopen.annotations.BoundaryBuilder

License requirements: drafting ("DRAFTING")
.

setDistanceTolerance(double) - Method in interface nxopen.cae.QueryCurveUsageOptions

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDistanceTolerance(double) - Method in interface nxopen.cam.InspectionOperationTransformBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDistanceTolerance(double) - Method in interface nxopen.cam.NCAssistantBuilder

License requirements: cam_base ("CAM BASE")
.

setDistanceTolerance(double) - Method in interface nxopen.cam.Topology

License requirements: cam_base ("CAM BASE")
.

setDistanceTolerance(double) - Method in interface nxopen.die.AddendumSectionBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setDistanceTolerance(double) - Method in interface nxopen.die.AddSurfBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setDistanceTolerance(double) - Method in interface nxopen.die.CastReliefBuilder

License requirements: ug_die_design ("Die Design")
.

setDistanceTolerance(double) - Method in interface nxopen.die.ClampingSlotBuilder

License requirements: ug_die_design ("Die Design")
.

setDistanceTolerance(double) - Method in interface nxopen.die.ClearanceBuilder

License requirements: ug_die_design ("Die Design")
.

setDistanceTolerance(double) - Method in interface nxopen.die.CompensateRoughDataBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDistanceTolerance(double) - Method in interface nxopen.die.DieShoeBuilder

License requirements: ug_die_design ("Die Design")
.

setDistanceTolerance(double) - Method in interface nxopen.die.DrawBeadBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setDistanceTolerance(double) - Method in interface nxopen.die.DrawDiePunchBuilder

Sets the distance tolerance of the draw die punch casting.

setDistanceTolerance(double) - Method in interface nxopen.die.FillAreaBuilder

License requirements: ug_die_design ("Die Design")
.

setDistanceTolerance(double) - Method in interface nxopen.die.FillBuilder

Sets the distance tolerance of the area fill
License requirements: die_engineering ("DIE ENGINEERING")
.

setDistanceTolerance(double) - Method in interface nxopen.die.FingerClearanceNotchBuilder

License requirements: ug_die_design ("Die Design")
.

setDistanceTolerance(double) - Method in interface nxopen.die.FlangeTaskBuilder

Sets the distance tolerance of the flange task
License requirements: die_engineering ("DIE ENGINEERING")
.

setDistanceTolerance(double) - Method in interface nxopen.die.FormTaskBuilder

Sets the distance tolerance of the form task.

setDistanceTolerance(double) - Method in interface nxopen.die.HandlingCoreBuilder

License requirements: ug_die_design ("Die Design")
.

setDistanceTolerance(double) - Method in interface nxopen.die.HeelpostBuilder

License requirements: ug_die_design ("Die Design")
.

setDistanceTolerance(double) - Method in interface nxopen.die.KeywayBuilder

License requirements: ug_die_design ("Die Design")
.

setDistanceTolerance(double) - Method in interface nxopen.die.MachineReliefBuilder

License requirements: ug_die_design ("Die Design")
.

setDistanceTolerance(double) - Method in interface nxopen.die.OutputCurvesBuilder

Sets the distance tolerance.

setDistanceTolerance(double) - Method in interface nxopen.die.PierceTaskBuilder

Sets the distance tolerance of the pierce task
License requirements: die_engineering ("DIE ENGINEERING")
.

setDistanceTolerance(double) - Method in interface nxopen.die.RotorBuilder

Sets the distance tolerance of the rotor casting.

setDistanceTolerance(double) - Method in interface nxopen.die.SpringbackCompensationBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR nx_freeform_2 ("advanced freeform modeling")
.

setDistanceTolerance(double) - Method in interface nxopen.die.SteelInsertBuilder

Sets the distance tolerance of the diesteelinsert casting
License requirements: ug_die_design ("Die Design")
.

setDistanceTolerance(double) - Method in interface nxopen.die.TrimLineDevelopmentBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setDistanceTolerance(double) - Method in interface nxopen.die.TrimTaskBuilder

Sets the distance tolerance of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.

setDistanceTolerance(double) - Method in interface nxopen.facet.BridgeFacetBodyBuilder

License requirements: None.

setDistanceTolerance(double) - Method in interface nxopen.facet.ExtrudeFacetBodyBuilder

License requirements: None.

setDistanceTolerance(double) - Method in interface nxopen.facet.MergeFacetBodyBuilder

License requirements: None.

setDistanceTolerance(double) - Method in interface nxopen.facet.SewFacetBodyBuilder

License requirements: None.

setDistanceTolerance(double) - Method in interface nxopen.features.AOCSBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.

setDistanceTolerance(double) - Method in interface nxopen.features.BlendCornerBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setDistanceTolerance(double) - Method in interface nxopen.features.CircularBlendCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDistanceTolerance(double) - Method in interface nxopen.features.ConcaveFacesBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDistanceTolerance(double) - Method in interface nxopen.features.CurveFinderBuilder

Set the distance Tolerance for loop Recognization
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setDistanceTolerance(double) - Method in interface nxopen.features.CurveLengthBuilder

Sets the distance tolerance
License requirements: solid_modeling ("SOLIDS MODELING")
.

setDistanceTolerance(double) - Method in interface nxopen.features.CurveOnSurfaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDistanceTolerance(double) - Method in interface nxopen.features.DraftBuilder

Sets the distance tolerance in [in/mm]
License requirements: solid_modeling ("SOLIDS MODELING")
.

setDistanceTolerance(double) - Method in interface nxopen.features.ExtendSheetBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDistanceTolerance(double) - Method in interface nxopen.features.ExtrudeBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDistanceTolerance(double) - Method in interface nxopen.features.FreeTransformerBuilder

License requirements: None.

setDistanceTolerance(double) - Method in interface nxopen.features.GlobalShapingBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDistanceTolerance(double) - Method in interface nxopen.features.GuidedExtensionBuilderEx

License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setDistanceTolerance(double) - Method in interface nxopen.features.HelixBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDistanceTolerance(double) - Method in interface nxopen.features.JoinCurvesBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setDistanceTolerance(double) - Method in interface nxopen.features.LawCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDistanceTolerance(double) - Method in interface nxopen.features.LawExtensionBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING")
.

setDistanceTolerance(double) - Method in interface nxopen.features.LawExtensionBuilderEx

License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING")
.

setDistanceTolerance(double) - Method in interface nxopen.features.LocalScaleCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setDistanceTolerance(double) - Method in interface nxopen.features.MatchEdgeBuilder

License requirements: features_modeling ("FEATURES MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setDistanceTolerance(double) - Method in interface nxopen.features.MeshTransformerBuilder

License requirements: None.

setDistanceTolerance(double) - Method in interface nxopen.features.MoveCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setDistanceTolerance(double) - Method in interface nxopen.features.OffsetEmbossBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDistanceTolerance(double) - Method in interface nxopen.features.OffsetMoveCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setDistanceTolerance(double) - Method in interface nxopen.features.OptimizeFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setDistanceTolerance(double) - Method in interface nxopen.features.OvercrownBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDistanceTolerance(double) - Method in interface nxopen.features.PatchOpeningsBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING")
.

setDistanceTolerance(double) - Method in interface nxopen.features.PointSetBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDistanceTolerance(double) - Method in interface nxopen.features.ResizeCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDistanceTolerance(double) - Method in interface nxopen.features.RibbonBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDistanceTolerance(double) - Method in interface nxopen.features.shipdesign.AlongGuideCutBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setDistanceTolerance(double) - Method in interface nxopen.features.shipdesign.BracketBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setDistanceTolerance(double) - Method in interface nxopen.features.shipdesign.CollarPlateBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setDistanceTolerance(double) - Method in interface nxopen.features.shipdesign.CornerCutBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setDistanceTolerance(double) - Method in interface nxopen.features.shipdesign.CuttingSideFacesBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setDistanceTolerance(double) - Method in interface nxopen.features.shipdesign.FeatureParmsBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setDistanceTolerance(double) - Method in interface nxopen.features.shipdesign.MarkingLineDesignBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setDistanceTolerance(double) - Method in interface nxopen.features.shipdesign.OrientationDefinitionBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setDistanceTolerance(double) - Method in interface nxopen.features.shipdesign.PillarBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setDistanceTolerance(double) - Method in interface nxopen.features.shipdesign.PlateBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setDistanceTolerance(double) - Method in interface nxopen.features.shipdesign.PlateDivideBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setDistanceTolerance(double) - Method in interface nxopen.features.shipdesign.ProfileBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setDistanceTolerance(double) - Method in interface nxopen.features.shipdesign.ProfileCutoutBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setDistanceTolerance(double) - Method in interface nxopen.features.shipdesign.ProfileTransitionBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setDistanceTolerance(double) - Method in interface nxopen.features.shipdesign.RollingLineBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setDistanceTolerance(double) - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setDistanceTolerance(double) - Method in interface nxopen.features.shipdesign.ShipPreparationBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setDistanceTolerance(double) - Method in interface nxopen.features.shipdesign.SplitProfilePlateBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setDistanceTolerance(double) - Method in interface nxopen.features.shipdesign.SplitStandardPartBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setDistanceTolerance(double) - Method in interface nxopen.features.shipdesign.SteelInsulationBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setDistanceTolerance(double) - Method in interface nxopen.features.shipdesign.StiffenerBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setDistanceTolerance(double) - Method in interface nxopen.features.shipdesign.WeldCut2Builder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setDistanceTolerance(double) - Method in interface nxopen.features.SweepAlongGuideBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDistanceTolerance(double) - Method in interface nxopen.features.SweptVolumeBuilder

License requirements: None.

setDistanceTolerance(double) - Method in interface nxopen.features.TrimAndExtendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDistanceTolerance(double) - Method in interface nxopen.features.VariableOffsetBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setDistanceTolerance(double) - Method in interface nxopen.features.VarsweepBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDistanceTolerance(double) - Method in interface nxopen.features.vehicledesign.AllAroundVisionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setDistanceTolerance(double) - Method in interface nxopen.features.WrapBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDistanceTolerance(double) - Method in interface nxopen.geometricanalysis.DeviationChecking

License requirements: None.

setDistanceTolerance(double) - Method in interface nxopen.geometricutilities.MatchSurfaceBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING")
.

setDistanceTolerance(double) - Method in interface nxopen.Section

License requirements: gateway ("UG GATEWAY")
.

setDistanceTolerance(double) - Method in interface nxopen.sim.SinumerikCaSimplifyBodiesBuilder

License requirements: nx_isv_mtb ("Machine Tool Builder") OR nx_sinumerik_ca ("Sinumerik Collision Avoidance")
.

setDistanceTolerance(double) - Method in interface nxopen.SketchAutoConstrainBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDistanceTolerance(double) - Method in interface nxopen.SketchEvaluator

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDistanceTolerance(double) - Method in interface nxopen.SketchIntersectionCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setDistanceTolerance(double) - Method in interface nxopen.tooling.BlendCurve3DBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING")
.

setDistanceTolerance(double) - Method in interface nxopen.tooling.GuidedExtensionBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING")
.

setDistanceTolerance(double) - Method in interface nxopen.tooling.OffsetCurve3DBuilder

Deprecated.

Deprecated in NX10.0.0. Please use CurveFitData.setTolerance(double) instead

setDistanceTolerance(double) - Method in interface nxopen.uf.UFModeling

Refer to UF_MODL_set_distance_tolerance for documentation.

setDistanceTolerance(double) - Method in interface nxopen.weld.EasyPatternBuilder

License requirements: ugweld ("UG WELD")
.

setDistanceTolerance(double) - Method in interface nxopen.weld.JointmarkBuilder

License requirements: ugweld ("UG WELD")
.

setDistanceTolerance(double) - Method in interface nxopen.weld.SurfaceWeldBuilder

License requirements: structure_weld ("STRUCTURE WELD")
.

setDistanceTolerance(double) - Method in interface nxopen.weld.WeldBeadBuilder

License requirements: ugweld ("UG WELD")
.

setDistanceTolerance(double) - Method in interface nxopen.weld.WeldFillBuilder

License requirements: ugweld ("UG WELD")
.

setDistanceTolerance(double) - Method in interface nxopen.weld.WeldGrooveBuilder

License requirements: ugweld ("UG WELD")
.

setDistanceTolerance(double) - Method in interface nxopen.weld.WeldPointBuilder

Sets the distance tolerance for the weld point
License requirements: ugweld ("UG WELD")
.

setDistanceToleranceData(double) - Method in interface nxopen.preferences.PartModeling

Sets the modeling distance tolerance data.

setDistanceType(BoundaryTurnMemberOffset.DistanceTypeMode) - Method in interface nxopen.cam.BoundaryTurnMemberOffset

License requirements: cam_base ("CAM BASE")
.

setDistanceType(ExtensionBuilder.Distance) - Method in interface nxopen.features.ExtensionBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setDistanceUnit(ReliefCut.DistanceUnits) - Method in interface nxopen.cam.ReliefCut

License requirements: cam_base ("CAM BASE")
.

setDistanceValue(double) - Method in interface nxopen.features.ResizeChamferCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDistanceVector(Direction) - Method in interface nxopen.geometricutilities.ModlMotion

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setDistanceX(double) - Method in interface nxopen.tooling.QuickQuotationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setDistanceY(double) - Method in interface nxopen.tooling.QuickQuotationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setDisToolEndProj(boolean) - Method in interface nxopen.cam.DmBndBuilder

License requirements: None.

setDistortionMap(FlatteningBuilder.DistortionMapType) - Method in interface nxopen.FlatteningBuilder

Deprecated.

Deprecated in NX11.0.0. Use FlatteningAndFormingBuilder instead.

setDistortionMapOptions(FlatteningAndFormingBuilder.DistortionMap) - Method in interface nxopen.features.FlatteningAndFormingBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDistributedContact(boolean) - Method in interface nxopen.motion.TirePropertyAdvancedParameters

License requirements: mechanisms ("MECHANISMS")
.

setDistributedContact(boolean) - Method in interface nxopen.motion.TirePropertyNonInertialBuilder

License requirements: mechanisms ("MECHANISMS")
.

setDistribution(boolean) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder

License requirements: None.

setDistTol(double) - Method in interface nxopen.features.WrapGeometryBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDistTolerance(double) - Method in interface nxopen.weld.FilletBuilder

License requirements: ugweld ("UG WELD")
.

setDistValueDisplayFlag(boolean) - Method in interface nxopen.cae.SimBCDisplay

Sets the true/false flag based on whether the distributed value of the BC is displayed in the graphics window
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDividePlane(Plane) - Method in interface nxopen.cam.SplitSubopCommand

License requirements: None.

setDivideSurface(boolean) - Method in interface nxopen.features.SnipSurfaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setDivideType(ToolPathDivideBuilder.PathDivideType) - Method in interface nxopen.cam.ToolPathDivideBuilder

License requirements: None.

setDivision(String) - Method in interface nxopen.annotations.EnterpriseIdentificationBuilder

License requirements: None.

setDivisions(int) - Method in interface nxopen.die.SpringbackCompensationBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR nx_freeform_2 ("advanced freeform modeling")
.

setDivisions(int) - Method in interface nxopen.features.MoveObjectBuilder

License requirements: None.

setDmAmRegionCon(boolean) - Method in interface nxopen.cam.DmAmBuilder

License requirements: None.

setDmBndCutZigDir(double[]) - Method in interface nxopen.cam.DmBndBuilder

Set boundary Zig Dir
License requirements: None.

setDmBndIntolOuttol(double[]) - Method in interface nxopen.cam.DmBndBuilder

Set boundary intol outtol
License requirements: None.

setDmBndStock(double) - Method in interface nxopen.cam.DmBndBuilder

License requirements: None.

setDmCmEndCutDisType(DmCmBuilder.ExtDisType) - Method in interface nxopen.cam.DmCmBuilder

Deprecated.

Deprecated in NX8.5.0. Use CAM.DmCmBuilder#endExtDistSpecValueBuilder instead.

setDmCmEndCutExtend(boolean) - Method in interface nxopen.cam.DmCmBuilder

Deprecated.

Deprecated in NX8.5.0. Use CAM.DmCmBuilder#endExtDistSpecValueBuilder instead.

setDmCmEndCutRadio(DmCmBuilder.DmCmCutPointType) - Method in interface nxopen.cam.DmCmBuilder

License requirements: None.

setDmCmEndCutToolAxisGuideVector(DmCmBuilder.ToolAxisGuideVectorType) - Method in interface nxopen.cam.DmCmBuilder

License requirements: None.

setDmCmFloorWallStockSame(boolean) - Method in interface nxopen.cam.DmCmBuilder

License requirements: None.

setDmCmStartCutDisType(DmCmBuilder.ExtDisType) - Method in interface nxopen.cam.DmCmBuilder

Deprecated.

Deprecated in NX8.5.0. Use CAM.DmCmBuilder#startExtDistSpecValueBuilder instead.

setDmCmStartCutExtend(boolean) - Method in interface nxopen.cam.DmCmBuilder

Deprecated.

Deprecated in NX8.5.0. Use CAM.DmCmBuilder#startExtDistSpecValueBuilder instead.

setDmCmStartCutRadio(DmCmBuilder.DmCmCutPointType) - Method in interface nxopen.cam.DmCmBuilder

License requirements: None.

setDmCmStartCutToolAxisGuideVector(DmCmBuilder.ToolAxisGuideVectorType) - Method in interface nxopen.cam.DmCmBuilder

License requirements: None.

setDmlExtension(String) - Method in interface nxopen.cam.InspectionAnalyzeOutputBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDmlPcs(String) - Method in interface nxopen.cam.InspectionAnalyzeOutputBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDmSpiralStepoverMenu(DmSpiralBuilder.DmSpiralStepoverTypes) - Method in interface nxopen.cam.DmSpiralBuilder

License requirements: None.

setDmSurfCutArea(DmRotaryFloorFinishBuilder.DmSurfCutAreaType) - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder

License requirements: cam_base ("CAM BASE")
.

setDmSurfCutArea(DmSurfBuilder.DmSurfCutAreaType) - Method in interface nxopen.cam.DmSurfBuilder

License requirements: None.

setDmSurfCutPattern(DmSurfBuilder.DmSurfCutPatternType) - Method in interface nxopen.cam.DmSurfBuilder

License requirements: None.

setDmSurfCutStep(DmRotaryFloorFinishBuilder.DmSurfCutStepTypes) - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder

License requirements: None.

setDmSurfCutStep(DmSurfBuilder.DmSurfCutStepType) - Method in interface nxopen.cam.DmSurfBuilder

License requirements: None.

setDmSurfCutStepFirstCut(int) - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder

License requirements: None.

setDmSurfCutStepFirstCut(int) - Method in interface nxopen.cam.DmSurfBuilder

License requirements: None.

setDmSurfCutStepSecondCut(int) - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder

License requirements: None.

setDmSurfCutStepSecondCut(int) - Method in interface nxopen.cam.DmSurfBuilder

License requirements: None.

setDmSurfCutStepThirdCut(int) - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder

License requirements: None.

setDmSurfCutStepThirdCut(int) - Method in interface nxopen.cam.DmSurfBuilder

License requirements: None.

setDmSurfCutTraversal(DmSurfBuilder.DmSurfCutTraversalType) - Method in interface nxopen.cam.DmSurfBuilder

License requirements: None.

setDmSurfGouge(DmRotaryFloorFinishBuilder.GougeActionTypes) - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder

License requirements: None.

setDmSurfGouge(DmSurfBuilder.GougeActionType) - Method in interface nxopen.cam.DmSurfBuilder

License requirements: None.

setDmSurfToolPos(DmSurfBuilder.ToolPositionType) - Method in interface nxopen.cam.DmSurfBuilder

License requirements: None.

setDmUserExitCi(String) - Method in interface nxopen.cam.DmUserExitCiBuilder

License requirements: None.

setDmvRotationPlane(Tag, Tag, Tag) - Method in interface nxopen.uf.UFDraw

Refer to UF_DRAW_set_dmv_rotation_plane for documentation.

setDoAppendMerge(boolean) - Method in interface nxopen.cae.SolverAppendOption

Deprecated.

Deprecated in NX9.0.0. Use SolverAppendOption.setImportBehavior(nxopen.cae.SolverAppendOption.ImportBehaviorOption) instead.

setDoAutomaticGeomMatch(boolean) - Method in interface nxopen.features.ReplaceFeatureBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDoCoplanarDecimation(boolean) - Method in interface nxopen.cae.FluidDomainBuilder

License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")
.

setDoDepthPasses(boolean) - Method in interface nxopen.cam.MultiplePassesBuilder

License requirements: None.

setDoExportMeshToSolver(boolean) - Method in interface nxopen.cae.FluidDomainBuilder

License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")
.

setDof1Weights(double[]) - Method in interface nxopen.cae.InterpolationEADBuilder

The set_dof1_weights operator selects elements
License requirements: nx_masterfem ("Finite Element Modeling")
.

setDof2Weights(double[]) - Method in interface nxopen.cae.InterpolationEADBuilder

The set_dof2_weights operator selects elements
License requirements: nx_masterfem ("Finite Element Modeling")
.

setDof3Weights(double[]) - Method in interface nxopen.cae.InterpolationEADBuilder

The set_dof3_weights operator selects elements
License requirements: nx_masterfem ("Finite Element Modeling")
.

setDof4Weights(double[]) - Method in interface nxopen.cae.InterpolationEADBuilder

The set_dof4_weights operator selects elements
License requirements: nx_masterfem ("Finite Element Modeling")
.

setDof5Weights(double[]) - Method in interface nxopen.cae.InterpolationEADBuilder

The set_dof5_weights operator selects elements
License requirements: nx_masterfem ("Finite Element Modeling")
.

setDof6Weights(double[]) - Method in interface nxopen.cae.InterpolationEADBuilder

The set_dof6_weights operator selects elements
License requirements: nx_masterfem ("Finite Element Modeling")
.

setDOFColor(int) - Method in interface nxopen.preferences.PartSketch

Sets the sketch degree of freedom arrow color
License requirements: None.

setDOFDisplay(boolean) - Method in interface nxopen.Sketch

Sets a flag indicating whether the degree of freedom arrows are currently being displayed
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setDofDisplayFlag(boolean) - Method in interface nxopen.cae.SimBCDisplay

Sets the true/false flag based on whether the dof of the BC is displayed in the graphics window
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDoFitOnHideOrShow(boolean) - Method in interface nxopen.preferences.SessionVisualizationScreen

Sets the option to specify whether a Fit should be done when a Hide or Show is performed.

setDofs(TBSCheckDOF.DofSettings) - Method in interface nxopen.cae.optimization.TBSCheckDOF

License requirements: cae_opt_toposhape ("NX Shape Optimization")
.

setDofs(FENode[], boolean[]) - Method in interface nxopen.cae.PreTestDofSet

Setting the dofs manually
License requirements: nx_correl_base ("FE Correlation")
.

setDofSet(CaeDOFSet) - Method in interface nxopen.cae.PreTestDofSet

Setting the CaeDOFSet reference
License requirements: nx_correl_base ("FE Correlation")

Created in NX7.5.0

setDofSets(CaeDOFSet[]) - Method in interface nxopen.cae.ImportSimulationBuilder

Set DOF sets to import
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDofSetSelect(CaeDOFSet) - Method in interface nxopen.cae.PreTestDofSetBuilder

License requirements: nx_correl_base ("FE Correlation")
.

setDoglegAngle(double) - Method in interface nxopen.annotations.OrdinateDimensionPreferences

Sets the dogleg angle
License requirements: None.

setDoglegAngle(double) - Method in interface nxopen.annotations.OrdinateStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDoglegCreationOption(OrdinateDoglegCreationOption) - Method in interface nxopen.annotations.OrdinateDimensionPreferences

Sets the dogleg creation option
License requirements: None.

setDoglegCreationOption(OrdinateDoglegCreationOption) - Method in interface nxopen.annotations.OrdinateStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDoglegData(OrdinateDimension.DoglegPreferences) - Method in interface nxopen.annotations.OrdinateDimension

Sets the dogleg data for Ordinate Dimension.

setDoglegDefinition(OrdinateDoglegDefinition) - Method in interface nxopen.annotations.OrdinateDimensionPreferences

Sets the dogleg definition
License requirements: None.

setDoglegEndOffset(double) - Method in interface nxopen.annotations.OrdinateDimensionPreferences

Sets the dogleg end offset
License requirements: None.

setDoglegEndOffset(double) - Method in interface nxopen.annotations.OrdinateStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDoglegSetting(OrdinateDoglegDefinition) - Method in interface nxopen.annotations.OrdinateStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDoglegStartOffset(double) - Method in interface nxopen.annotations.OrdinateDimensionPreferences

Sets the dogleg start offset
License requirements: None.

setDoglegStartOffset(double) - Method in interface nxopen.annotations.OrdinateStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDomeImage(Image) - Method in interface nxopen.display.Background

License requirements: None.

setDomeImageFilename(String) - Method in interface nxopen.display.Background

License requirements: None.

setDomeOrigin(Point) - Method in interface nxopen.display.Background

License requirements: None.

setDomeSize(double) - Method in interface nxopen.display.Background

License requirements: None.

setDoorTopLeft(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setDoorTopLeft(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarWizardBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setDoorTopLeft(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setDoorTopLeft(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarWizardBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setDoorTopLeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setDoorTopLeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setDoorTopRight(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setDoorTopRight(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarWizardBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setDoorTopRight(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setDoorTopRight(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarWizardBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setDoorTopRightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setDoorTopRightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setDoPaste(boolean) - Method in interface nxopen.features.CopyFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setDoPaste(boolean) - Method in interface nxopen.features.CutFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setDoSharpFeatureEdge(boolean) - Method in interface nxopen.cae.FluidDomainBuilder

License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")
.

setDoSharpFeaturePlaneIntersection(boolean) - Method in interface nxopen.cae.FluidDomainBuilder

License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")
.

setDoSidePasses(boolean) - Method in interface nxopen.cam.MultiplePassesBuilder

License requirements: cam_base ("CAM BASE")
.

setDotArrowheadDiameter(double) - Method in interface nxopen.annotations.LineAndArrowPreferences

Sets the dot arrowhead diameter
License requirements: None.

setDotArrowheadDiameter(double) - Method in interface nxopen.annotations.LineArrowStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDoTest(boolean) - Method in interface nxopen.cae.modelcheck.ITestValue

License requirements: None.

setDoTrimWithoutCopy(boolean) - Method in interface nxopen.features.shipdesign.SplitProfilePlateBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setDouble(String, double) - Method in interface nxopen.blockstyler.PropertyList

Sets the double value for the given property name.

setDouble(int, int, double) - Method in interface nxopen.ITableEditorDataProvider

Sets double data at a particular location in the table.

setDouble(int[], int, double) - Method in interface nxopen.ITableEditorDataProvider

Sets double data on a range of table cells in a specified column.

setDouble(String, double) - Method in interface nxopen.PropertyContainer

Sets the double value for the given property name.

setDouble(UFVariant, String, double) - Method in interface nxopen.uf.UFMom

Refer to UF_MOM_set_double for documentation.

setDouble(UFVariant, String, double) - Method in interface nxopen.uf.UFUde

Refer to UF_UDE_set_double for documentation.

setDoubleA(double) - Method in interface nxopen.tooling.ScrapDesignBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDoubleAngle(double) - Method in interface nxopen.tooling.ScrapDesignBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDoubleArray(UFVariant, String, int, double[]) - Method in interface nxopen.uf.UFMom

Refer to UF_MOM_set_double_array for documentation.

setDoubleArraySize(int) - Method in interface nxopen.motion.LmsSolverProperty

License requirements: mechanisms ("MECHANISMS")
.

setDoubleB(double) - Method in interface nxopen.tooling.ScrapDesignBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDoubleBorder(boolean) - Method in interface nxopen.annotations.TableSectionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDoubleDefault(double) - Method in interface nxopen.annotations.MasterSymbolListItemBuilder

License requirements: drafting ("DRAFTING")
.

setDoubleDirVecI(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDoubleDirVecJ(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDoubleDirVecK(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDoubleH(double) - Method in interface nxopen.tooling.ScrapDesignBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDoubleLower(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDoubleLowerParamOuterProfile(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDoubleMatrix(String, int, int, double[]) - Method in interface nxopen.blockstyler.PropertyList

Sets the double matrix for the given property name.

setDoubleMatrix(String, int, int, double[]) - Method in interface nxopen.PropertyContainer

Sets the double matrix for the given property name.

setDoubleMax(double) - Method in interface nxopen.annotations.MasterSymbolListItemBuilder

License requirements: drafting ("DRAFTING")
.

setDoubleMin(double) - Method in interface nxopen.annotations.MasterSymbolListItemBuilder

License requirements: drafting ("DRAFTING")
.

setDoubleNominal(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDoubleOfScalar(Tag, double) - Method in interface nxopen.uf.UFSo

Refer to UF_SO_set_double_of_scalar for documentation.

setDoubleParamExtArea(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDoubleParamExtLength(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDoubleParamOuterProfile(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDoubleParamTolValue(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDoubleParamTolValue1(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDoublePassTranslucency(double) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setDoublePropertyValue(String, double) - Method in interface nxopen.BasePropertyTable

Sets the double value of the property
License requirements: None.

setDoubleR(double) - Method in interface nxopen.tooling.ScrapDesignBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDoubles(double[]) - Method in interface nxopen.features.UserDefinedFeatureApplicationField

Sets all of the doubles in this field
License requirements: None.

setDoubles(double[]) - Method in interface nxopen.userdefinedobjects.UserDefinedObject

Sets all of the doubles stored with this UDO
License requirements: None.

setDoubles(int, int, double[]) - Method in interface nxopen.userdefinedobjects.UserDefinedObject

Replaces the doubles stored with this UDO in the specified range with a new array of doubles
License requirements: None.

setDoubleSide(boolean) - Method in interface nxopen.blockstyler.SpecifyVector

License requirements: None.

setDoubleSidedMaximumValue(String) - Method in interface nxopen.validate.RequirementBuilder

License requirements: None.

setDoubleSidedMinimumValue(String) - Method in interface nxopen.validate.RequirementBuilder

License requirements: None.

setDoubleUgAttribute(UFVariant, String, double) - Method in interface nxopen.uf.UFMfm

Refer to UF_MFM_set_double_ug_attribute for documentation.

setDoubleUpper(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDoubleValue(double) - Method in interface nxopen.cam.CAMAttribute

Set the feature attribute double value for a double type attribute
License requirements: cam_base ("CAM BASE"), cam_base ("CAM BASE")
.

setDoubleValue(String, double) - Method in interface nxopen.cam.Cycle

Set the double value of the parameter
License requirements: cam_base ("CAM BASE")
.

setDoubleValue(double) - Method in interface nxopen.cam.UdeParameter

License requirements: cam_base ("CAM BASE")
.

setDoubleValue(double) - Method in interface nxopen.SpreadsheetCellData

License requirements: None.

setDoubleValue(Tag, int, double) - Method in interface nxopen.uf.UFParam

Refer to UF_PARAM_set_double_value for documentation.

setDoubleValueOfAttribute(UFVariant, String, double) - Method in interface nxopen.uf.UFMfm

Refer to UF_MFM_set_double_value_of_attribute for documentation.

setDoubleVector(String, double[]) - Method in interface nxopen.blockstyler.PropertyList

Sets the double vector for the given property name.

setDoubleVector(String, double[]) - Method in interface nxopen.PropertyContainer

Sets the double vector for the given property name.

setDoubleViewScale(double) - Method in interface nxopen.tooling.AssemblyDrawingBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setDoubleViewVecI(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDoubleViewVecJ(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDoubleViewVecK(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDoubleVla(Tag, int, int, double[]) - Method in interface nxopen.uf.UFParam

Refer to UF_PARAM_set_double_vla for documentation.

setDownDirection(Direction) - Method in interface nxopen.routing.RouteManager

License requirements: routing_base ("Routing Basic")
.

setDownToleranceForLength(double) - Method in interface nxopen.tooling.DieDesPierceInsertBuilder

License requirements: ug_die_design ("Die Design")
.

setDownToleranceForWidth(double) - Method in interface nxopen.tooling.DieDesPierceInsertBuilder

License requirements: ug_die_design ("Die Design")
.

setDpiEnum(StudioImageCaptureBuilder.DPIEnumType) - Method in interface nxopen.display.StudioImageCaptureBuilder

License requirements: None.

setDpmcvStepType(DmCurveBuilder.DpmcvStepTypes) - Method in interface nxopen.cam.DmCurveBuilder

License requirements: None.

setDpmProjType(ProjVecCiBuilder.DpmProjTypes) - Method in interface nxopen.cam.ProjVecCiBuilder

Set the Project Type
License requirements: None.

setDraftAllInstances(boolean) - Method in interface nxopen.features.DraftBuilder

Sets the option "Draft all instances" [true/false]
License requirements: solid_modeling ("SOLIDS MODELING")
.

setDraftAngle(double) - Method in interface nxopen.cam.GeometrySet

License requirements: cam_base ("CAM BASE")
.

setDraftAngle(String) - Method in interface nxopen.geometricutilities.SimpleDraft

Deprecated.

Deprecated in NX5.0.0. To set the value of the expression modify the expression directly using GeometricUtilities.SimpleDraft#draftAngle and Expression.setRightHandSide(java.lang.String) .

setDraftAngleScale(double) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setDraftBothSides(boolean) - Method in interface nxopen.features.DraftBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDraftCommon(Tag) - Method in interface nxopen.uf.UFDrf

Refer to UF_DRF_set_draft_common for documentation.

setDraftingMode(EWDraftingBuilder.ModeOption) - Method in interface nxopen.tooling.EWDraftingBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setDraftingSketchCircles(boolean) - Method in interface nxopen.annotations.HoleTableSettingsHoleFiltersBuilder

License requirements: drafting ("DRAFTING")
.

setDraftingSurfaceFinishStandard(SurfaceFinishStandard) - Method in interface nxopen.annotations.SymbolPreferences

Sets the drafting surface finish standard
License requirements: None.

setDraftingSurfaceFinishStandard(SurfaceFinishStandard) - Method in interface nxopen.annotations.SymbolStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDraftIsoclineOrTruedraft(DraftBuilder.Method) - Method in interface nxopen.features.DraftBuilder

Sets the Draft method
License requirements: solid_modeling ("SOLIDS MODELING")
.

setDraftMethod(DraftBodyBuilder.Method) - Method in interface nxopen.features.DraftBodyBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDraftOption(SimpleDraft.SimpleDraftType) - Method in interface nxopen.geometricutilities.MultiDraft

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDraftReferencesMethod(DraftBuilder.DraftReferencesMethods) - Method in interface nxopen.features.DraftBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDraftType(EndCutBuilder.DraftTypes) - Method in interface nxopen.features.shipdesign.EndCutBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setDraftType(SimpleDraft.SimpleDraftType) - Method in interface nxopen.geometricutilities.SimpleDraft

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDragData(boolean) - Method in interface nxopen.tooling.EnlargeSurfaceBuilder

License requirements: None.

setDraggedObject(NXObject) - Method in interface nxopen.linedesigner.FastPlacementUtilityBuilder

Set the dragged object
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setDragHandlePositionPreference(SessionAssemblies.DragHandlePositionOption) - Method in interface nxopen.preferences.SessionAssemblies

Sets the drag handle position preference
License requirements: None.

setDrapingExtension(LaminateDrapingExtension) - Method in interface nxopen.cae.LaminatePly

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setDrapingInput(LaminateDrapingData) - Method in interface nxopen.cae.LaminatePly

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setDrapingMeshRatio(double) - Method in interface nxopen.cae.LaminateDrapingDataBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setDrapingPath(LaminateDrapingDataBuilder.DrapingPathType) - Method in interface nxopen.cae.LaminateDrapingDataBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setDrawBeadCurves(Curve[]) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder

Sets the draw bead curves.

setDrawBeadTypeOption(LsdynaGeometryPreparationBuilder.DrawBeadType) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setDrawBox(boolean) - Method in interface nxopen.cae.PostAnnotation

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setDrawDirection(Direction) - Method in interface nxopen.bodydes.OnestepUnformBuilder

License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setDrawDirection(int, int, int) - Method in interface nxopen.bodydes.OnestepUnformBuilder

Sets the unform draw direction.

setDrawDirection(Direction) - Method in interface nxopen.die.AddendumSectionBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setDrawDirection(Direction) - Method in interface nxopen.die.TrimLineDevelopmentBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setDrawDirection(Direction) - Method in interface nxopen.features.ConcaveFacesBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDrawDirection(Direction) - Method in interface nxopen.features.DraftBodyBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDrawing(String) - Method in interface nxopen.cam.WorkInstructionBuilder

License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.

setDrawingArray(TaggedObject[]) - Method in interface nxopen.IgesCreator

Sets the drawings - the list of drawings to translate
License requirements: None.

setDrawingArray(TaggedObject[]) - Method in interface nxopen.NXTo2dCreator

Sets the drawing - sets the list of drawings to translate
License requirements: None.

setDrawingCgmData(boolean) - Method in interface nxopen.PartSaveOptions

Sets the option indicating whether to generate the CGM data and store it in the QAF when you save the part file
License requirements: None.

setDrawingDisplay(UFDisp.DrawingDisplayData) - Method in interface nxopen.uf.UFDisp

Refer to UF_DISP_set_drawing_display for documentation.

setDrawingFileNamingRule(String) - Method in interface nxopen.tooling.CompDrawingBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setDrawingFilter(CompDrawingBuilder.DrawingType) - Method in interface nxopen.tooling.CompDrawingBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setDrawingLayout(boolean) - Method in interface nxopen.DraftingManager

Set a drafting layout
License requirements: None.

setDrawingList(String) - Method in interface nxopen.DxfdwgCreator

License requirements: None.

setDrawingList(String) - Method in interface nxopen.IgesCreator

License requirements: None.

setDrawingName(String) - Method in interface nxopen.features.shipdesign.SectionViewBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setDrawingName(String) - Method in interface nxopen.NXTo2dCreator

License requirements: None.

setDrawingPlane(Plane) - Method in interface nxopen.features.PolylineBuilder

License requirements: features_modeling ("FEATURES MODELING")
.

setDrawingPlane(Plane) - Method in interface nxopen.features.StudioSplineBuilderEx

License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setDrawingPlaneOption(GeneralConicBuilder.DrawingPlaneOptions) - Method in interface nxopen.features.GeneralConicBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setDrawingPlaneOption(PolylineBuilder.DrawingPlaneOptions) - Method in interface nxopen.features.PolylineBuilder

License requirements: features_modeling ("FEATURES MODELING")
.

setDrawingPlaneOption(StudioSplineBuilderEx.DrawingPlaneOptions) - Method in interface nxopen.features.StudioSplineBuilderEx

License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setDrawingReferencePoint(Point3d) - Method in interface nxopen.drawings.DraftingView

Sets the view origin at the provided location.

setDrawingRefPt(Tag, Tag, double[]) - Method in interface nxopen.uf.UFDraw

Refer to UF_DRAW_set_drawing_ref_pt for documentation.

setDrawingSheetColors(Tag, UFCgm.CustomColors) - Method in interface nxopen.uf.UFPlot

Refer to UF_PLOT_set_drawing_sheet_colors for documentation.

setDrawingSheetName(String) - Method in interface nxopen.tooling.DrawingSheetNameBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setDrawingSheetNamingRule(String) - Method in interface nxopen.tooling.CompDrawingBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setDrawingSheetWidths(Tag, UFCgm.CustomWidths) - Method in interface nxopen.uf.UFPlot

Refer to UF_PLOT_set_drawing_sheet_widths for documentation.

setDrawingSizeEnum(StudioImageCaptureBuilder.DrawingSizeEnumType) - Method in interface nxopen.display.StudioImageCaptureBuilder

License requirements: None.

setDrawingStyle(String) - Method in interface nxopen.drafting.DrawingCreationWizardBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setDrawingSuffixName(String) - Method in interface nxopen.features.shipdesign.PinJigBuilder

License requirements: nx_ship_mfg_prep ("Ship Manufacturing")
.

setDrawingType(EWDraftingBuilder.DrawingOption) - Method in interface nxopen.tooling.EWDraftingBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setDrawingTypesEnum(IsoDrawingBuilder.DrawingTypes) - Method in interface nxopen.routing.IsoDrawingBuilder

License requirements: None.

setDrawLineBetweenPoints(boolean) - Method in interface nxopen.features.WavePointBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setDrawOption(DraftAnalysisBuilder.DrawDirection) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setDrawOrientation(Matrix3x3) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setDrawOrigin(Point3d) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setDrawTypeOption(LsdynaGeometryPreparationBuilder.DrawType) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setDrawVector(Direction) - Method in interface nxopen.die.SpringbackCompensationBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR nx_freeform_2 ("advanced freeform modeling")
.

setDrawVector(Direction) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setDrawVentHoles(boolean) - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setDrawX(boolean) - Method in interface nxopen.annotations.DatumData

Sets the flag indicating whether to draw X, where the leader terminates
License requirements: None.

setDrawX(boolean) - Method in interface nxopen.annotations.DatumTargetBuilder

Deprecated.

Deprecated in NX10.0.0. Use DatumTargetBuilder.setTerminatorType(nxopen.annotations.DatumTargetBuilder.TerminatorTypes) instead.

setDrf(Tag, UFGdt.DrfData) - Method in interface nxopen.uf.UFGdt

Refer to UF_GDT_set_drf for documentation.

setDrfTransform(boolean) - Method in interface nxopen.cam.InspectionAnalyzeOutputBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setDrillingLocation(CenterlineDrillTurningBuilder.DrillingLocationTypes) - Method in interface nxopen.cam.CenterlineDrillTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setDrillSize(String) - Method in interface nxopen.features.HolePackageBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDrillSizeEndChamferEnabled(boolean) - Method in interface nxopen.features.HolePackageBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDrillSizeFitOption(String) - Method in interface nxopen.features.HolePackageBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDrillSizeStandard(String) - Method in interface nxopen.features.HolePackageBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDrillSizeStartChamferEnabled(boolean) - Method in interface nxopen.features.HolePackageBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setDriveColor(NXColor) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setDriveDirection(UFVariant, double[]) - Method in interface nxopen.uf.UFDrpos

Refer to UF_DRPOS_set_drive_direction for documentation.

setDriveGeometryType(TeachmodeProfileMoveBuilder.DriveGeometryTypes) - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder

License requirements: cam_base ("CAM BASE")
.

setDriveMethod(SurfaceContourBuilder.DriveMethodTypes) - Method in interface nxopen.cam.SurfaceContourBuilder

Set drive method
License requirements: cam_base ("CAM BASE")
.

setDrivePoint(String) - Method in interface nxopen.cam.ChamferMillingBuilder

License requirements: cam_base ("CAM BASE")
.

setDrivePoint(int) - Method in interface nxopen.cam.PlanarMillingBuilder

License requirements: cam_base ("CAM BASE")
.

setDrivePointSpecified(boolean) - Method in interface nxopen.cam.PlanarMillingBuilder

The drive point specified flag
License requirements: None.

setDriver(SimDebugBuilder.DriverType) - Method in interface nxopen.sim.SimDebugBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setDriverGraph(TireEnvelopeBuilder.DriverGraphOption) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setDriverJoints(NXObject, NXObject) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

Set the driver steering joint and jounce joint.

setDriverSideStandard(MirrorCertificationBuilder.DriverSideStandardsType) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setDriveStock(double) - Method in interface nxopen.cam.GeometrySet

License requirements: cam_base ("CAM BASE")
.

setDriveStock(double) - Method in interface nxopen.cam.SurfaceDriveGeometrySet

License requirements: cam_base ("CAM BASE")
.

setDriveVector(Direction) - Method in interface nxopen.tooling.SpindleSliderBuilder

License requirements: nx_dievalidation ("DIE VALIDATION")
.

setDrivingMethod(DrivingValueBuilder.DrivingValueMethod) - Method in interface nxopen.annotations.DrivingValueBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setDrivingPostureCheck(boolean) - Method in interface nxopen.features.vehicledesign.ManikinBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setDropFace(NXObject) - Method in interface nxopen.tooling.ReusableObjectPasteBuilder

License requirements: None.

setDropObject(NXObject) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder

License requirements: None.

setDropThruDiameter(double) - Method in interface nxopen.die.HoleChildBuilder

Sets the drop thru diameter of the die hole.

setDropThruDiameter(double) - Method in interface nxopen.die.HoleParentBuilder

Sets the drop thru diameter of die holes.

setDryrun(boolean) - Method in interface nxopen.uf.UFClone

Refer to UF_CLONE_set_dryrun for documentation.

setDualDimensionDecimalPlaces(int) - Method in interface nxopen.annotations.LinearTolerance

Sets the number of decimal places for dual dimension
License requirements: None.

setDualDimensionFormat(DualDimensionPlacement) - Method in interface nxopen.annotations.UnitsStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDualDimensionFractionDenominator(FractionDenominatorFormat) - Method in interface nxopen.annotations.DimensionPreferences

Sets the dual dimension and tolerance fraction denominator
License requirements: None.

setDualDimensionFractionDenominator(FractionDenominatorFormat) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDualDimensionPlacement(DualDimensionPlacement) - Method in interface nxopen.annotations.UnitsFormatPreferences

Sets the dual dimension placement relative to the primary dimension
License requirements: None.

setDualDimensionTextFormat(DimensionTextFormat) - Method in interface nxopen.annotations.UnitsFormatPreferences

Sets the dual dimension text format
License requirements: None.

setDualDimensionUnit(DimensionUnit) - Method in interface nxopen.annotations.UnitsFormatPreferences

Sets the dual dimension unit
License requirements: None.

setDualDimensionUnits(DimensionUnit) - Method in interface nxopen.annotations.UnitsStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDualDimensionValuePrecision(int) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDualFractionType(DimensionTextFormat) - Method in interface nxopen.annotations.UnitsStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDualToleranceDecimalPlaces(int) - Method in interface nxopen.annotations.LinearTolerance

Sets the number of decimal places for dual tolerance
License requirements: None.

setDualToleranceValuePrecision(int) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setDuctShape(DuctSizeCalculatorBuilder.DuctShapeType) - Method in interface nxopen.routing.DuctSizeCalculatorBuilder

License requirements: routing_hvac ("Routing HVAC")
.

setDueDate(String) - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setDueDate(String) - Method in interface nxopen.features.shipdesign.PenetrationReviewRequestBuilder

License requirements: nx_penetration_mgmt ("Penetration Management")
.

setDueDate(String) - Method in interface nxopen.issue.IssueContent

License requirements: nx_issue_mgmt ("NX Issue Tracking")
.

setDueDate(String) - Method in interface nxopen.issue.IssueContentBuilder

License requirements: nx_issue_mgmt ("NX Issue Tracking")
.

setDummyScale(double) - Method in interface nxopen.fields.DisplayPropertiesBuilder

License requirements: None.

setDump(SimDebugBuilder.DumpType) - Method in interface nxopen.sim.SimDebugBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setDumpOutput(SimDebugBuilder.OutputType) - Method in interface nxopen.sim.SimDebugBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setDumpToFileName(String) - Method in interface nxopen.sim.SimDebugBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setDuplicateCheck(boolean) - Method in interface nxopen.weld.WeldJointBuilder

License requirements: structure_weld ("STRUCTURE WELD")
.

setDuration(double) - Method in interface nxopen.cae.responsesimulation.RSEventAttributes

License requirements: nx_response_anlys ("NX Response Analysis")
.

setDuration(double) - Method in interface nxopen.mechatronics.GanttOperationBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setDurationOption(RSEvent.DurationOption) - Method in interface nxopen.cae.responsesimulation.RSEventAttributes

License requirements: None.

setDwell(Cycle.DwellType) - Method in interface nxopen.cam.Cycle

License requirements: cam_base ("CAM BASE")
.

setDwell(double) - Method in interface nxopen.cam.CycleDwell

License requirements: cam_base ("CAM BASE")
.

setDwell(double) - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder

License requirements: cam_base ("CAM BASE")
.

setDwellFinal(Cycle.DwellType) - Method in interface nxopen.cam.Cycle

License requirements: cam_base ("CAM BASE")
.

setDwellFinalValue(double) - Method in interface nxopen.cam.Cycle

License requirements: cam_base ("CAM BASE")
.

setDwellMode(CycleDwell.Mode) - Method in interface nxopen.cam.CycleDwell

License requirements: cam_base ("CAM BASE")
.

setDwellStart(Cycle.DwellType) - Method in interface nxopen.cam.Cycle

License requirements: cam_base ("CAM BASE")
.

setDwellStartValue(double) - Method in interface nxopen.cam.Cycle

License requirements: cam_base ("CAM BASE")
.

setDwellType(CenterlineDrillTurningBuilder.DwellTypes) - Method in interface nxopen.cam.CenterlineDrillTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setDwellUnit(TurnRoughFinishLocalReturnBuilder.DwellUnitTypes) - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder

License requirements: cam_base ("CAM BASE")
.

setDwellValue(double) - Method in interface nxopen.cam.Cycle

License requirements: cam_base ("CAM BASE")
.

setDxfRevision(ExportFlatPatternBuilder.DxfRevisionType) - Method in interface nxopen.features.sheetmetal.ExportFlatPatternBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setDxIncrement(double) - Method in interface nxopen.tooling.StandardPartPositionBuilder

License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setDyIncrement(double) - Method in interface nxopen.tooling.StandardPartPositionBuilder

License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setDynamicAlignment(boolean) - Method in interface nxopen.preferences.SessionDrafting

Sets the dynamic alignment flag.

setDynamicAlignmentInGlobalSelection(boolean) - Method in interface nxopen.annotations.CommonWorkflowBuilder

License requirements: drafting ("DRAFTING")
.

setDynamicCoefficient(double) - Method in interface nxopen.motion.BodyContactAdams

Deprecated.

Deprecated in NX8.0.0. Obtion the exression using BodyContactAdams.dynamicCoefficientExpression() to query or edit it.

setDynamicCoefficient(double) - Method in interface nxopen.motion.BodyContactRecurdyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using BodyContactRecurdyn.dynamicCoefficientExpression() to query or edit it.

setDynamicCoefficient(double) - Method in interface nxopen.motion.CurveContactAdams

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using CurveContactAdams.dynamicCoefficientExpression() to query or edit it.

setDynamicCoefficient(double) - Method in interface nxopen.motion.CurveContactRecurdyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using CurveContactRecurdyn.dynamicCoefficientExpression() to query or edit it.

setDynamicConstraintDisplay(boolean) - Method in interface nxopen.preferences.SessionSketch

Sets the dynamic constraints display flag.

setDynamicCsysOrientation(Matrix3x3) - Method in interface nxopen.tooling.ReusableObjectPasteBuilder

License requirements: None.

setDynamicCsysOrientation(Matrix3x3) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder

License requirements: None.

setDynamicCsysOrigin(Point3d) - Method in interface nxopen.tooling.ReusableObjectPasteBuilder

License requirements: None.

setDynamicCsysOrigin(Point3d) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder

License requirements: None.

setDynamicErrorTolerance(double) - Method in interface nxopen.motion.RecurdynSolverProperty

Deprecated.

Deprecated in NX8.5.0. Obtion the expression using RecurdynSolverProperty.dynamicErrorToleranceExpression() to query or edit it.

setDynamicEventName(String) - Method in interface nxopen.cae.LaminateDynamicEventBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setDynamicFriction(double) - Method in interface nxopen.mechatronics.PreferencesBuilder

Deprecated.

Deprecated in NX9.0.0. This functionality is no longer supported.

setDynamicInitialStepSize(double) - Method in interface nxopen.motion.RecurdynSolverProperty

Deprecated.

Deprecated in NX8.5.0. Obtion the expression using RecurdynSolverProperty.dynamicInitialStepSizeExpression() to query or edit it.

setDynamicInitialVelocityMethod(int) - Method in interface nxopen.motion.LmsSolverProperty

License requirements: mechanisms ("MECHANISMS")
.

setDynamicIRayPlusCaustics(boolean) - Method in interface nxopen.display.IRayPlusStudioEditorBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setDynamicIRayPlusStudioRenderMode(IRayPlusStudioEditorBuilder.DynamicIRayPlusStudioRenderModeType) - Method in interface nxopen.display.IRayPlusStudioEditorBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setDynamicMaxKinIteration(int) - Method in interface nxopen.motion.RecurdynSolverProperty

License requirements: mechanisms ("MECHANISMS")
.

setDynamicMaxStepSize(double) - Method in interface nxopen.motion.RecurdynSolverProperty

Deprecated.

Deprecated in NX8.5.0. Obtion the expression using RecurdynSolverProperty.dynamicMaxStepSizeExpression() to query or edit it.

setDynamicNormal(int, Vector3d) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder

Sets dynamic normal
License requirements: studio_analyze ("STUDIO ANALYZE")
.

setDynamicNumericalDamping(double) - Method in interface nxopen.motion.RecurdynSolverProperty

Deprecated.

Deprecated in NX8.5.0. Obtion the expression using RecurdynSolverProperty.dynamicNumericalDampingExpression() to query or edit it.

setDynamicParent(int, DisplayableObject) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder

Sets dynamic parent
License requirements: studio_analyze ("STUDIO ANALYZE")
.

setDynamicPositioning(boolean) - Method in interface nxopen.assemblies.ComponentPatternBuilder

Sets the dynamic positioning flag.

setDynamicProjection(boolean) - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder

License requirements: None.

setDynamicProjection(boolean) - Method in interface nxopen.geometricanalysis.SurfaceIntersectionBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setDynamicRayTracedStudioTilingQuality(RayTracedStudioEditorBuilder.DynamicRayTracedStudioTilingQualityType) - Method in interface nxopen.display.RayTracedStudioEditorBuilder

License requirements: None.

setDynamics(TirePropertyTnoBuilder.DynamicsType) - Method in interface nxopen.motion.TirePropertyTnoBuilder

License requirements: mechanisms ("MECHANISMS")
.

setDynamicSectionVisible(DynamicSection, boolean) - Method in interface nxopen.ModelingView

Sets the specified dynamic section object is visible/invisible in this view.

setDynamicSolverAccelerationMethod(int) - Method in interface nxopen.motion.LmsSolverProperty

License requirements: mechanisms ("MECHANISMS")
.

setDynamicUpdate(SessionModeling.DynamicUpdateType) - Method in interface nxopen.preferences.SessionModeling

Sets the dynamic update.

setDynamicUpdate(int) - Method in interface nxopen.uf.UFModeling

Refer to UF_MODL_set_dynamic_update for documentation.

setE(String) - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder

License requirements: drafting ("DRAFTING")
.

setE(String) - Method in interface nxopen.annotations.SurfaceFinishBuilder

License requirements: None.

setEcadValue(String) - Method in interface nxopen.mechatronics.ComparisonResultAttribute

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setEccAuto(boolean) - Method in interface nxopen.cae.MappedMeshBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setEccName(String) - Method in interface nxopen.cae.MappedMeshBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setEccName(String) - Method in interface nxopen.cae.ReassignElementsBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setEdge(Edge) - Method in interface nxopen.features.sheetmetal.FlangeBuilder

Sets the edge on which the flange is created.

setEdgeChain(Section) - Method in interface nxopen.features.sheetmetal.ContourFlangeBuilder

Sets the section having chain edges.

setEdgeDefinition(BladeEdge.EdgeDefinitionType) - Method in interface nxopen.cam.BladeEdge

License requirements: cam_base ("CAM BASE")
.

setEdgeDensity(Tag, UFSf.EdgeDensityData) - Method in interface nxopen.uf.UFSf

Refer to UF_SF_set_edge_density for documentation.

setEdgeDensitySize(int) - Method in interface nxopen.cae.MeshControlDisplayOptionsBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setEdgeFace(int[]) - Method in interface nxopen.cae.PostAnnotationBuilder

Set the edge or face id for which annotation is defined
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setEdgeIndexToEdit(int) - Method in interface nxopen.die.QuickBinderBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setEdgeIntegralOption(ResultProbeBuilder.EdgeIntegral) - Method in interface nxopen.cae.ResultProbeBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setEdgeIntegralOptionValue(PostGraphBuilder.EdgeIntegralOption) - Method in interface nxopen.cae.PostGraphBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setEdgeLength(double) - Method in interface nxopen.cam.FormEdgesBuilder

License requirements: cam_base ("CAM BASE")
.

setEdgeLength(double) - Method in interface nxopen.facet.SubdivideFacetBodyBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setEdgeMatchOption(boolean) - Method in interface nxopen.cae.MappedMeshBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setEdgeMatchTolerance(double) - Method in interface nxopen.cae.MappedMeshBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setEdgeMergeAngle(double) - Method in interface nxopen.cae.MappedMeshBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setEdgePair(Edge, Edge) - Method in interface nxopen.features.shipdesign.ShipPreparationBuilder

Sets the pairing data between the two edges input.

setEdgePrepValues(JointExitBuilder.Positions, double, double) - Method in interface nxopen.weld.JointExitBuilder

This method should be called multiple times.

setEdgeReinforcementAlignment(StiffenerBuilder.EdgeReinforcementAlignmentMethod) - Method in interface nxopen.features.shipdesign.StiffenerBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setEdgeReinforcementPlacementMethod(StiffenerBuilder.EdgeReinforcementPlacementMethods) - Method in interface nxopen.features.shipdesign.StiffenerBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setEdges(Edge[]) - Method in interface nxopen.features.sheetmetal.BreakCornerBuilder

The array of input edges for the break corner.

setEdgeSelectors(Edge[]) - Method in interface nxopen.geometricutilities.RegionTracker

The input target or tool edges used to identify the region
License requirements: solid_modeling ("SOLIDS MODELING")
.

setEdgesEmphasis(boolean) - Method in interface nxopen.preferences.SessionVisualizationShade

Sets the edge emphasis flag.Alters how edges are displayed when Shaded Face Edges is flag is true.

setEdgesHiddenByEdges(boolean) - Method in interface nxopen.drawings.HiddenLinesViewStyle

Sets the staus of edges hidden by edges.

setEdgesHiddenByEdges(boolean) - Method in interface nxopen.drawings.ViewStyleHiddenLinesBuilder

License requirements: drafting ("DRAFTING")
.

setEdgesHiddenByEdges(boolean) - Method in interface nxopen.preferences.HiddenLinesViewPreferences

Sets the staus of edges hidden by edges.

setEdgesPrepared(boolean) - Method in interface nxopen.weld.EdgePrepValuesBuilder

License requirements: structure_weld ("STRUCTURE WELD")
.

setEdgeToEdgeConnectionMethodType(CAEConnectionBuilder.EdgeToEdgeConnectionMethodTypeEnum) - Method in interface nxopen.cae.CAEConnectionBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setEdgeTolerance(double) - Method in interface nxopen.cae.CAEConnectionBuilder

License requirements: None.

setEdgeTolerance(double) - Method in interface nxopen.drawings.ViewStyleShadingBuilder

License requirements: drafting ("DRAFTING")
.

setEdgeTolerance(double) - Method in interface nxopen.geometricutilities.DisplayResolutionBuilder

License requirements: None.

setEdgeType(WeldGrooveBuilder.Edge) - Method in interface nxopen.weld.WeldGrooveBuilder

License requirements: ugweld ("UG WELD")
.

setEdit(boolean) - Method in interface nxopen.features.shipdesign.ExpansionDrawingBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setEditableText(String) - Method in interface nxopen.annotations.TitleBlockCellBuilder

License requirements: drafting ("DRAFTING")
.

setEditAction(DesignElementBuilder.EditActionType) - Method in interface nxopen.assemblies.DesignElementBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setEditBlankOption(BlankGeneratorBuilder.EditBlankType) - Method in interface nxopen.tooling.BlankGeneratorBuilder

License requirements: None.

setEditCopy(boolean) - Method in interface nxopen.facet.DecimateFacetBodyBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setEditCopy(boolean) - Method in interface nxopen.facet.SmoothFacetBodyBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setEditCopy(boolean) - Method in interface nxopen.facet.SnipFacetBodyBuilder

License requirements: None.

setEditCopy(boolean) - Method in interface nxopen.facet.SubdivideFacetBodyBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setEditCopy(boolean) - Method in interface nxopen.features.SnipSurfaceBuilder

License requirements: None.

setEditCopy(boolean) - Method in interface nxopen.geometricutilities.LocalUntrimBuilder

License requirements: nx_freeform_1 ("basic freeform modeling") OR nx_freeform_2 ("advanced freeform modeling")
.

setEditedConstraintCurve(Curve) - Method in interface nxopen.die.AddendumSectionBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setEditFeatureGroup(NXObject) - Method in interface nxopen.tooling.ReusableObjectPasteBuilder

License requirements: None.

setEditFeatureGroup(Feature) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder

License requirements: None.

setEditGuidedExtension(boolean) - Method in interface nxopen.tooling.SpecialFormingBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setEditMethod(ScrapDesignBuilder.EditScrapType) - Method in interface nxopen.tooling.ScrapDesignBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setEditMode(boolean) - Method in interface nxopen.features.shipdesign.PenetrationAssociationBuilder

License requirements: nx_penetration_mgmt ("Penetration Management")
.

setEditOption(int) - Method in interface nxopen.tooling.DirectUnfoldBuilder

License requirements: None.

setEditOption(IntermediateStageBuilder.EditOptions) - Method in interface nxopen.tooling.IntermediateStageBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setEditOptions(String[], int) - Method in interface nxopen.blockstyler.Tree

Sets the options in edit-control.

setEditorText(String[]) - Method in interface nxopen.annotations.TextWithEditControlsBuilder

Text into the editor text
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setEditPoleEnabled(boolean) - Method in interface nxopen.features.MatchEdgeBuilder

License requirements: features_modeling ("FEATURES MODELING")
.

setEditPolesEnabled(boolean) - Method in interface nxopen.features.EdgeSymmetryBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setEditSizeChoice(QuickBinderWrapBuilder.EditSizeType) - Method in interface nxopen.die.QuickBinderWrapBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setEditStationNum(int) - Method in interface nxopen.tooling.ScrapDesignBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setEditType(QuickBinderBuilder.EditTypes) - Method in interface nxopen.die.QuickBinderBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setEditType(SectionInViewBuilder.EditSxtype) - Method in interface nxopen.drawings.SectionInViewBuilder

Sets the type
License requirements: drafting ("DRAFTING")
.

setEditWithRollbackFeature(Feature) - Method in interface nxopen.features.FeatureCollection

Sets the feature being edited with rollback
License requirements: None.

setEditWithRollbackUponDoubleClick(boolean) - Method in interface nxopen.preferences.SessionModeling

Sets the option "Edit with Rollback upon Double-Click" gives choice of what action to be taken on feature upon Double clicking, either in partnavigator or in Graphics widow.

setEdmOption(boolean) - Method in interface nxopen.tooling.EWDraftingBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setEdmTemplate(EWDraftingBuilder.EDMTemplateOption) - Method in interface nxopen.tooling.EWDraftingBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setEffect(JointFrictionAdams.FrictionEffect) - Method in interface nxopen.motion.JointFrictionAdams

Sets the effect
License requirements: mechanisms ("MECHANISMS")
.

setEffect(JointFrictionRecurDyn.FrictionEffect) - Method in interface nxopen.motion.JointFrictionRecurDyn

Sets the effect
License requirements: mechanisms ("MECHANISMS")
.

setEffectiveStrain(boolean) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setEffectiveStress(boolean) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setEffectivityFormula(String, String) - Method in interface nxopen.pdm.SmartSaveObject

Sets the new effectivity formula to be applied on this smart save object
License requirements: nx_4gd_integration ("4th Generation Design")
.

setEffectivityType(EffectivityConditionBuilder.EffectivityConditionType) - Method in interface nxopen.EffectivityConditionBuilder

License requirements: None.

setEjectionStartAngle(double) - Method in interface nxopen.tooling.MotionSimulationBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setEjectorDrawingType(EjectorTableBuilder.DrawingType) - Method in interface nxopen.tooling.EjectorTableBuilder

License requirements: ug_mold_design ("UG MOLD")
.

setEjectorMoveOption(MotionSimulationBuilder.EjectorMoveOptions) - Method in interface nxopen.tooling.MotionSimulationBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setEjectorPinType(EjectorTableBuilder.EjectorType) - Method in interface nxopen.tooling.EjectorTableBuilder

License requirements: ug_mold_design ("UG MOLD")
.

setElbowAppliedCharx(CharacteristicList) - Method in interface nxopen.routing.CornerTypeBuilder

Sets the applied charx for elbow creation
License requirements: routing_base ("Routing Basic")
.

setElbowPart(CharacteristicList) - Method in interface nxopen.routing.CornerTypeBuilder

Sets the elbow part to be used for elbow creation
License requirements: routing_base ("Routing Basic")
.

setElbowSnapSettings(ElbowSnapSettings) - Method in interface nxopen.routing.LinearPathBuilder

Sets the elbow snapping settings for determining location of control points as the user drags their mouse.

setElectrodeBlankBuilder(TaggedObject) - Method in interface nxopen.tooling.ElectrodeCopyBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setElectrodeNameFilter(String) - Method in interface nxopen.tooling.ElectrodeCheckingBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setElement(int) - Method in interface nxopen.annotations.ShipDimensionBuilder

License requirements: drafting ("DRAFTING")
.

setElementalMapping(int) - Method in interface nxopen.cae.LaminateImportedLayupBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setElementalNodalMapping(int) - Method in interface nxopen.cae.LaminateImportedLayupBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setElementColorCycler(ModelDisplayBuilder.ElmClrBasis) - Method in interface nxopen.cae.ModelDisplayBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setElementConnectivity(boolean) - Method in interface nxopen.cae.NodeElementInfoBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setElementConnectScope(AlignShellElementNormalBuilder.ConnectedElementScope) - Method in interface nxopen.cae.modelcheck.AlignShellElementNormalBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setElementContainer(MeshCollector) - Method in interface nxopen.cae.DestinationCollectorBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setElementcriteria(Result.ElementValueCriterion) - Method in interface nxopen.cae.ResultVariable

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setElementDimension(ElementTranslateBuilder.ElemDimensionType) - Method in interface nxopen.cae.ElementTranslateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setElementDimension(ElementTypeBuilder.ElementType) - Method in interface nxopen.cae.ElementTypeBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setElementDimensionOption(ElementCreateBuilder.ElemDimType) - Method in interface nxopen.cae.ElementCreateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setElementDimensionOption(ElementExtrudeBuilder.ElemDimType) - Method in interface nxopen.cae.ElementExtrudeBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setElementDimensionOption(ElementProjectBuilder.ElementDimensionType) - Method in interface nxopen.cae.ElementProjectBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setElementDimensionOption(ElementReflectBuilder.ElemDimType) - Method in interface nxopen.cae.ElementReflectBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setElementDimensionOption(ElementRevolveBuilder.ElemDimType) - Method in interface nxopen.cae.ElementRevolveBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setElementDimOpt(ReassignElementsBuilder.ElementDimensionOption) - Method in interface nxopen.cae.ReassignElementsBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setElementDisplayQuality(ModelDisplayBuilder.ElmDispQuality) - Method in interface nxopen.cae.ModelDisplayBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setElementFaceStressAxis(DurabilityStressAxesBuilder.ElementFaceStressAxisEnum) - Method in interface nxopen.cae.DurabilityStressAxesBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setElementLocation(DataLocation.Element) - Method in interface nxopen.cae.responsesimulation.DataLocation

License requirements: nx_response_anlys ("NX Response Analysis")
.

setElementLocation(ElementLocation) - Method in interface nxopen.cae.responsesimulation.ElementalFunctionEvaluationSettingBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setElementMarker(MarkerType0d) - Method in interface nxopen.cae.MeshCollectorDisplayDefaults0d

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setElementMarker(MarkerType0d) - Method in interface nxopen.cae.MeshDisplaySettings0d

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setElementName(String) - Method in interface nxopen.annotations.ShipDimensionBuilder

License requirements: drafting ("DRAFTING")
.

setElementNormals(ElementNormalsType) - Method in interface nxopen.cae.MeshCollectorDisplayDefaults2d

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setElementNormals(ElementNormalsType) - Method in interface nxopen.cae.MeshDisplaySettings2d

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setElementOffset(int) - Method in interface nxopen.cae.SolverAppendOption

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setElementOrder(ElementTypeBuilder.ElementOrderType) - Method in interface nxopen.cae.ElementTypeBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setElementQuality(boolean) - Method in interface nxopen.cae.NodeElementInfoBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setElementReportFormat(ElementQualityCheckBuilder.ReportFormat) - Method in interface nxopen.cae.modelcheck.ElementQualityCheckBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setElements(int[]) - Method in interface nxopen.cae.FreeBodyResultsBuilder

The free body elements
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setElements(int[]) - Method in interface nxopen.cae.PostAnnotationBuilder

Set the element ids for which annotation is defined
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setElements(FEElement[]) - Method in interface nxopen.cae.ResultMeasureModelSubsetFE

Set the finite elements
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setElementSelectInternal(boolean) - Method in interface nxopen.cae.ModelDisplayBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setElementShrinkPercent(int) - Method in interface nxopen.cae.MeshCollectorDisplayDefaults1d

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setElementShrinkPercent(int) - Method in interface nxopen.cae.MeshCollectorDisplayDefaults2d

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setElementShrinkPercent(int) - Method in interface nxopen.cae.MeshCollectorDisplayDefaults3d

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setElementShrinkPercent(int) - Method in interface nxopen.cae.MeshDisplaySettings1d

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setElementShrinkPercent(int) - Method in interface nxopen.cae.MeshDisplaySettings2d

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setElementShrinkPercent(int) - Method in interface nxopen.cae.MeshDisplaySettings3d

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setElementSize(double) - Method in interface nxopen.cae.MappedMeshBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setElementsOutputOption(ElementQualityCheckBuilder.OutputElements) - Method in interface nxopen.cae.modelcheck.ElementQualityCheckBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setElementType(String) - Method in interface nxopen.cae.MappedMeshBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setElementType(boolean) - Method in interface nxopen.cae.NodeElementInfoBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setElementType(LsdynaKfileGeneratorBuilder.MeshElementType) - Method in interface nxopen.tooling.LsdynaKfileGeneratorBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setElementTypeName(String) - Method in interface nxopen.cae.ElementTypeBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setElementTypeOpt(ReassignElementsBuilder.ElementTypeOption) - Method in interface nxopen.cae.ReassignElementsBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setElementValueAtNode(ResultsManipulationBuilder.ElementValueAtNode) - Method in interface nxopen.cae.ResultsCombinationBuilder

Set element value to be used at a node
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setElementValueAtNode(ResultsManipulationBuilder.ElementValueAtNode) - Method in interface nxopen.cae.ResultsEnvelopeBuilder

Set element value to be used at a node
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setElementValueAtNode(ResultsManipulationBuilder.ElementValueAtNode) - Method in interface nxopen.cae.ResultsReductionBuilder

Set element value to be used at a node
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setElementValueCriterion(Result.ElementValueCriterion) - Method in interface nxopen.cae.CrossSectionParameters

Set how element the result is defined
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setElementValueCriterion(Result.ElementValueCriterion) - Method in interface nxopen.cae.ResultParameters

Set how element the result is defined This option is only valid for nodal and elemen-nodal result; dose not do anything for element result.

setElemMaterialDisplayLaminateColor(NXColor) - Method in interface nxopen.cae.ModelDisplayBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setElemMaterialDisplayNoMaterialColor(NXColor) - Method in interface nxopen.cae.ModelDisplayBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setElemNodalOption(LaminateGraphicalReportBuilder.ElemNodalOptionType) - Method in interface nxopen.cae.LaminateGraphicalReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setElemNodalOption(LaminateQuickReportBuilder.ElemNodalOptionType) - Method in interface nxopen.cae.LaminateQuickReportBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setElemNodalOption(LaminateSpreadsheetReportBuilder.ElemNodalOptionType) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setElemQualFailColor(NXColor) - Method in interface nxopen.cae.ModelDisplayBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setElemQualFailShadedBorderColor(NXColor) - Method in interface nxopen.cae.ModelDisplayBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setElemQualPassColor(NXColor) - Method in interface nxopen.cae.ModelDisplayBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setElemQualPassTranslucency(int) - Method in interface nxopen.cae.ModelDisplayBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setElemQualPassType(ModelDisplayBuilder.ElemQualPass) - Method in interface nxopen.cae.ModelDisplayBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setElemtypes(boolean) - Method in interface nxopen.cae.ResultVariable

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setEmphasis(ThroughCurveMeshBuilder.EmphasisType) - Method in interface nxopen.features.ThroughCurveMeshBuilder

License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

setEmphasisColor(NXColor) - Method in interface nxopen.preferences.PartVisualizationEmphasis

Deprecated.

Deprecated in NX9.0.0. This functionality is no longer supported.

setEmphasize(MeshParameterData.Type) - Method in interface nxopen.MeshParameterData

Sets
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

setEmptyRefset(Component) - Method in interface nxopen.assemblies.ComponentAssembly

Convenience method for setting the reference set used to represent a component to be empty
License requirements: None.

setEnable(boolean) - Method in interface nxopen.blockstyler.UIBlock

License requirements: None.

setEnable(boolean) - Method in interface nxopen.cae.responsesimulation.FunctionComponentData

License requirements: nx_response_anlys ("NX Response Analysis")
.

setEnable(boolean) - Method in interface nxopen.motion.JointFriction

Sets the option of included
License requirements: mechanisms ("MECHANISMS")
.

setEnable(boolean) - Method in interface nxopen.motion.PackagingBuilder

Sets the enable flag of Packaging object.

setEnableAngularLowerLimit(boolean) - Method in interface nxopen.mechatronics.CylindricalJointBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setEnableAngularUpperLimit(boolean) - Method in interface nxopen.mechatronics.CylindricalJointBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setEnableBoundaryAdjustment(boolean) - Method in interface nxopen.features.shipdesign.SteelInsulationBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setEnableCollarPlate(boolean) - Method in interface nxopen.features.shipdesign.ProfileCutoutBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setEnableCollision(SimulationOptionsBuilder.Enable) - Method in interface nxopen.cam.SimulationOptionsBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setEnableCornerCut(boolean) - Method in interface nxopen.features.shipdesign.ProfileCutoutBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setEnableDetailedOutput(boolean) - Method in interface nxopen.cae.DurabilityDamageEvaluationBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setEnabledInView(View, boolean) - Method in interface nxopen.Light

Whether a light is to be enabled in a given view.

setEnableDirectedDimension(boolean) - Method in interface nxopen.annotations.DimensionWorkflowBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setEnableDisplay(SimulationOptionsBuilder.Enable) - Method in interface nxopen.cam.SimulationOptionsBuilder

Deprecated.

Deprecated in NX10.0.2. Use CAM.SimulationOptionsBuilder#setSimulationDisplay instead.

setEnableDoubleClickFlip(boolean) - Method in interface nxopen.blockstyler.SpecifyOrientation

License requirements: None.

setEnableEngraving(boolean) - Method in interface nxopen.display.DecalBuilder

License requirements: None.

setEnableFacetSelection(boolean) - Method in interface nxopen.blockstyler.SpecifyOrientation

License requirements: None.

setEnableFacetSelection(boolean) - Method in interface nxopen.blockstyler.SpecifyPoint

License requirements: None.

setEnableFacetSelection(boolean) - Method in interface nxopen.blockstyler.SpecifyVector

License requirements: None.

setEnableForce(boolean) - Method in interface nxopen.motion.JointFrictionRecurDyn

Sets the enable force
License requirements: mechanisms ("MECHANISMS")
.

setEnableGapTolerance(boolean) - Method in interface nxopen.cae.ContactMeshBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setEnableHybridDesign(boolean) - Method in interface nxopen.Catiav5Creator

License requirements: None.

setEnableIpw(SimulationOptionsBuilder.IpwEnable) - Method in interface nxopen.cam.SimulationOptionsBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setEnableLevelBasedIpw(boolean) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setEnableLimitForce(boolean) - Method in interface nxopen.mechatronics.PositionControlBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setEnableLimitForce(boolean) - Method in interface nxopen.mechatronics.SpeedControlBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setEnableLinearLowerLimit(boolean) - Method in interface nxopen.mechatronics.CylindricalJointBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setEnableLinearUpperLimit(boolean) - Method in interface nxopen.mechatronics.CylindricalJointBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setEnableLowerLimit(boolean) - Method in interface nxopen.mechatronics.HingeJointBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setEnableLowerLimit(boolean) - Method in interface nxopen.mechatronics.LimitSwitchBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setEnableLowerLimit(boolean) - Method in interface nxopen.mechatronics.SlidingJointBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setEnableMeshMorph(boolean) - Method in interface nxopen.cae.BaseFemPart

Sets the enable mesh morphing flag
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setEnablePreview(boolean) - Method in interface nxopen.tooling.AddReusablePart

Sets the toggle of the Preview widget
License requirements: None.

setEnableResize(boolean) - Method in interface nxopen.annotations.PmiPreferences

License requirements: None.

setEnableReverseDirection(boolean) - Method in interface nxopen.blockstyler.SpecifyVector

License requirements: None.

setEnableSmoothEdgesForLWView(boolean) - Method in interface nxopen.drawings.ViewWorkflowBuilder

Deprecated.

Deprecated in NX11.0.0. Replacement is not needed. We recommend removing this call from existing programs.

setEnableSmoothEdgesForLWView(boolean) - Method in interface nxopen.preferences.PartDrafting

Sets the flat indicating whether the smart lightweight views should show the smooth edges or render them as normal curves
License requirements: None.

setEnableStereo(boolean) - Method in interface nxopen.preferences.SessionVisualizationSpecialEffects

Sets the enable stereo flag.

setEnableTimeSync(boolean) - Method in interface nxopen.mechatronics.PreferencesBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setEnableTorque(boolean) - Method in interface nxopen.motion.JointFrictionRecurDyn

Sets the enable torque
License requirements: mechanisms ("MECHANISMS")
.

setEnableTrimmedAnimation(boolean) - Method in interface nxopen.preferences.SessionModeling

Sets the enable trimmed animation setting.

setEnableUpperLimit(boolean) - Method in interface nxopen.mechatronics.HingeJointBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setEnableUpperLimit(boolean) - Method in interface nxopen.mechatronics.LimitSwitchBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setEnableUpperLimit(boolean) - Method in interface nxopen.mechatronics.SlidingJointBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setEnableUserDefinedDirection(boolean) - Method in interface nxopen.cae.responsesimulation.TranslationalNodalFunctionExcitationBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setEnableUserDefinedRotation(boolean) - Method in interface nxopen.cae.responsesimulation.TranslationalNodalFunctionExcitationBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setEnd(double) - Method in interface nxopen.cam.PitchSetting

License requirements: cam_base ("CAM BASE")
.

setEnd(double) - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord

Deprecated.

Deprecated in NX8.5.0. Use CurveAnalysisDisplay .

setEndAlignFillerSurfaceOption(AlignmentMethodBuilder.AlignFillerSurfaceType) - Method in interface nxopen.geometricutilities.AlignmentMethodBuilder

Sets the end align filler surface option
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setEndAngle(double) - Method in interface nxopen.cam.InspectionArcFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setEndAngle(double) - Method in interface nxopen.cam.RoughFinishTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setEndAngle(double) - Method in interface nxopen.features.SectionCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setEndAttributes(String, String, int) - Method in interface nxopen.die.RotorSectionBuilder

Sets the end faces attributes
License requirements: ug_die_design ("Die Design")
.

setEndAttributes(String, String, int) - Method in interface nxopen.die.SteelInsertSectionBuilder

Sets the end faces attributes
License requirements: ug_die_design ("Die Design")
.

setEndBlendScaleFactor(double) - Method in interface nxopen.geometricutilities.ScalingMethodBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setEndcapFace(ScCollector) - Method in interface nxopen.features.EmbossTarget

Sets the face to produce End-Cap
License requirements: solid_modeling ("SOLIDS MODELING")
.

setEndCapLimitPlaneOption(boolean) - Method in interface nxopen.features.FaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setEndcapOption(EmbossLimit.EndcapMethod) - Method in interface nxopen.features.EmbossLimit

Sets the endcap method to create the End-Cap
License requirements: solid_modeling ("SOLIDS MODELING")
.

setEndcapPlane(ISurface) - Method in interface nxopen.features.EmbossTarget

Sets the plane to produce End-Cap
License requirements: solid_modeling ("SOLIDS MODELING")
.

setEndCapSize(int) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setEndcapSource(EmbossLimit.EndcapSourceOption) - Method in interface nxopen.features.EmbossLimit

Sets the endcap source option to decide where the End-Cap comes from
License requirements: solid_modeling ("SOLIDS MODELING")
.

setEndCapType(int) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setEndChamferEnabled(boolean) - Method in interface nxopen.geometricutilities.MiddleHoleData

License requirements: solid_modeling ("SOLIDS MODELING")
.

setEndChamferEnabled(boolean) - Method in interface nxopen.geometricutilities.StartHoleData

License requirements: solid_modeling ("SOLIDS MODELING")
.

setEndCompensation(AeroFlangeBuilder.EndType, AeroFlangeBuilder.CompType, String) - Method in interface nxopen.features.sheetmetal.AeroFlangeBuilder

Set end compensation.

setEndConstraint(NXObject, boolean, boolean) - Method in interface nxopen.SketchMirrorPatternBuilder

This function removes end constraint from the given mirror pattern
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setEndConstraint(NXObject, int, boolean, boolean) - Method in interface nxopen.SketchOffsetBuilder

This function removes end constraint from the given offset
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setEndConstraint(NXObject, int, boolean, boolean) - Method in interface nxopen.SketchPatternBuilder

This function removes end constraint from the given pattern
License requirements: solid_modeling ("SOLIDS MODELING")
.

setEndContinuity(Continuity.ContinuityTypes) - Method in interface nxopen.geometricutilities.CurveShapingBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setEndContinuityOption(BridgeCurveBuilder.ConstraintTypes) - Method in interface nxopen.features.BridgeCurveBuilder

Deprecated.

Deprecated in NX8.5.0. Use BridgeCurveBuilderEx instead.

setEndCurveDirectionOption(BridgeCurveBuilder.CurveDirectionTypes) - Method in interface nxopen.features.BridgeCurveBuilder

Deprecated.

Deprecated in NX8.5.0. Use BridgeCurveBuilderEx instead.

setEndCut(double) - Method in interface nxopen.cam.DmTrimExtend

License requirements: cam_base ("CAM BASE")
.

setEndCutEnd(EdgeReinforcementBuilder.EndCutTypes) - Method in interface nxopen.features.shipdesign.EdgeReinforcementBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setEndCutEnd(StiffenerSystemBuilder.EndCutTypes) - Method in interface nxopen.features.shipdesign.EditStockBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setEndCutEnd(StiffenerSystemBuilder.EndCutTypes) - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setEndCutEnd(StiffenerSystemBuilder.EndCutTypes) - Method in interface nxopen.features.shipdesign.SubSystemBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setEndCutSplit(StiffenerSystemBuilder.EndCutTypes) - Method in interface nxopen.features.shipdesign.SeamBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setEndCutStart(EdgeReinforcementBuilder.EndCutTypes) - Method in interface nxopen.features.shipdesign.EdgeReinforcementBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setEndCutStart(StiffenerSystemBuilder.EndCutTypes) - Method in interface nxopen.features.shipdesign.EditStockBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setEndCutStart(StiffenerSystemBuilder.EndCutTypes) - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setEndCutStart(StiffenerSystemBuilder.EndCutTypes) - Method in interface nxopen.features.shipdesign.SubSystemBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setEndCutType(PillarBuilder.EndCutTypes) - Method in interface nxopen.features.shipdesign.PillarBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setEndCutType(ProfileBuilder.EndCutOption) - Method in interface nxopen.features.shipdesign.ProfileBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setEndCutType(StiffenerBuilder.EndCutTypes) - Method in interface nxopen.features.shipdesign.StiffenerBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setEndDirection(Direction) - Method in interface nxopen.AutomaticTraceline

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setEndDirection(boolean) - Method in interface nxopen.features.SectionSurfaceBuilderEx

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setEndDistance(double) - Method in interface nxopen.cam.BoundaryTurnMemberOffset

License requirements: cam_base ("CAM BASE")
.

setEndDistance(double) - Method in interface nxopen.cam.InspectionCurveFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setEndDistance(double) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setEndDistance(double) - Method in interface nxopen.cam.InspectionScanArcBuilder

License requirements: None.

setEndDistance(double) - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder

License requirements: None.

setEndDistance(double) - Method in interface nxopen.cam.InspectionScanCurveBuilder

License requirements: None.

setEndDistance(double) - Method in interface nxopen.cam.InspectionScanLineBuilder

License requirements: None.

setEndDistance(double) - Method in interface nxopen.features.SectionCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setEndDistance(String) - Method in interface nxopen.geometricutilities.CurveLengthData

Set end distance
License requirements: solid_modeling ("SOLIDS MODELING")
.

setEndDistance(String) - Method in interface nxopen.weld.WeldPointBuilder

License requirements: ugweld ("UG WELD")
.

setEndDistanceLocation(WeldParasetLocation) - Method in interface nxopen.weld.WeldPointBuilder

Sets the end dist location
License requirements: ugweld ("UG WELD")
.

setEndEdge(boolean) - Method in interface nxopen.tooling.TraverseLoopBuilder

License requirements: None.

setEndEdgeConstraint(MatchEdgeBuilder.EdgeConstraintType) - Method in interface nxopen.features.MatchEdgeBuilder

License requirements: features_modeling ("FEATURES MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setEndEdgeLocked(boolean) - Method in interface nxopen.features.MatchEdgeBuilder

License requirements: features_modeling ("FEATURES MODELING")
.

setEndExtension(InheritableToolDepBuilder) - Method in interface nxopen.cam.FollowGeometryMoveBuilder

License requirements: cam_base ("CAM BASE")
.

setEndExtension(double) - Method in interface nxopen.routing.HealPath

Set end extension.

setEndExtensionOption(CurveExtensionBuilder.ExtensionOption) - Method in interface nxopen.geometricutilities.CurveExtensionBuilder

License requirements: features_modeling ("FEATURES MODELING")
.

setEndExtensionOption(SplineExtensionBuilder.ExtensionOption) - Method in interface nxopen.geometricutilities.SplineExtensionBuilder

License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setEndExtensions(double, double) - Method in interface nxopen.annotations.CenterlineBuilder

Modifies end extensions only
License requirements: drafting ("DRAFTING")
.

setEndFaceBehavior(MoveEdgeBuilder.EndFaceBehaviorType) - Method in interface nxopen.features.MoveEdgeBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setEndFaceBehavior(OffsetEdgeBuilder.EndFaceBehaviourType) - Method in interface nxopen.features.OffsetEdgeBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setEndFlowDirection(SectionSurfaceBuilder.FlowDirectionEnum) - Method in interface nxopen.features.SectionSurfaceBuilder

Deprecated.

Deprecated in NX9.0.0. Use SectionSurfaceBuilderEx instead.

setEndFrame(int) - Method in interface nxopen.features.shipdesign.TransFrameListItemBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setEndFrameName(String) - Method in interface nxopen.features.shipdesign.ItFrameListItemBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setEndGaps(boolean) - Method in interface nxopen.drawings.ViewStyleSmoothEdgesBuilder

License requirements: drafting ("DRAFTING")
.

setEndGaps(boolean) - Method in interface nxopen.drawings.ViewStyleVirtualIntersectionsBuilder

License requirements: drafting ("DRAFTING")
.

setEndGapsDistance(double) - Method in interface nxopen.drawings.ViewStyleSmoothEdgesBuilder

License requirements: drafting ("DRAFTING")
.

setEndGapsDistance(double) - Method in interface nxopen.drawings.ViewStyleVirtualIntersectionsBuilder

License requirements: drafting ("DRAFTING")
.

setEndHandlesLinked(boolean) - Method in interface nxopen.features.BridgeSurfaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setEndian(SHMSignalConnectionBuilder.EndianType) - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setEndIteration(BaseIteration) - Method in interface nxopen.cae.Post3DGraphBuilder

Set end iteration
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setEndIteration(BaseIteration) - Method in interface nxopen.cae.PostGraphAcrossIterationsBuilder

Set end iteration
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setEndIterIndex(int) - Method in interface nxopen.cae.ResultProbeBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setEndIterValue(double) - Method in interface nxopen.cae.ResultProbeBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setEndLimitFaceNormalFlag(boolean) - Method in interface nxopen.features.FaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setEndLimitFacesetCollector(ScCollector) - Method in interface nxopen.features.FaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setEndLimitHelperPoint(double[]) - Method in interface nxopen.features.RevolveBuilder

If until selected option is used for end limit and the selected entity intersects the revolve multiple times, this point (in parasolid units) will help the system determine which intersection to select.

setEndLimitPoint(Point) - Method in interface nxopen.features.FaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setEndLine(NXObject) - Method in interface nxopen.cam.ThreadTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setEndLocation1(Point) - Method in interface nxopen.drawings.HalfSectionLineBuilder

Deprecated.

Deprecated in NX10.0.0. Use Drawings.SectionViewBuilder#sectionLineSegments instead.

setEndLocation1(Point) - Method in interface nxopen.drawings.OrientedSectionLineBuilder

Deprecated.

Deprecated in NX10.0.0. This API is not supported yet and should not be used.

setEndLocation1(Point) - Method in interface nxopen.drawings.PointAndAngleSectionLineBuilder

Deprecated.

Deprecated in NX10.0.0. This API is not supported yet and should not be used.

setEndLocation1(Point) - Method in interface nxopen.drawings.PointToPointSectionLineBuilder

Deprecated.

Deprecated in NX10.0.0. Use Drawings.SectionViewBuilder#sectionLineSegments instead.

setEndLocation1(Point) - Method in interface nxopen.drawings.RevolvedSectionLineBuilder

Deprecated.

Deprecated in NX10.0.0. This API is not supported yet and should not be used.

setEndLocation1(Point) - Method in interface nxopen.drawings.SteppedSectionLineBuilder

Deprecated.

Deprecated in NX10.0.0. Use Drawings.SectionViewBuilder#sectionLineSegments instead.

setEndLocation2(Point) - Method in interface nxopen.drawings.OrientedSectionLineBuilder

Deprecated.

Deprecated in NX10.0.0. This API is not supported yet and should not be used.

setEndLocation2(Point) - Method in interface nxopen.drawings.PointAndAngleSectionLineBuilder

Deprecated.

Deprecated in NX10.0.0. This API is not supported yet and should not be used.

setEndLocation2(Point) - Method in interface nxopen.drawings.PointToPointSectionLineBuilder

Deprecated.

Deprecated in NX10.0.0. Use Drawings.SectionViewBuilder#sectionLineSegments instead.

setEndLocation2(Point) - Method in interface nxopen.drawings.RevolvedSectionLineBuilder

Deprecated.

Deprecated in NX10.0.0. This API is not supported yet and should not be used.

setEndLocation2(Point) - Method in interface nxopen.drawings.SteppedSectionLineBuilder

Deprecated.

Deprecated in NX10.0.0. Use Drawings.SectionViewBuilder#sectionLineSegments instead.

setEndLocked(boolean) - Method in interface nxopen.features.EdgeSymmetryBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setEndObjectOption(BridgeCurveBuilder.EndObjectTypes) - Method in interface nxopen.features.BridgeCurveBuilder

Deprecated.

Deprecated in NX8.5.0. Use BridgeCurveBuilderEx instead.

setEndObjectType(BridgeCurveBuilderEx.EndObjectTypes) - Method in interface nxopen.features.BridgeCurveBuilderEx

License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_1 ("basic freeform modeling")
.

setEndOfFlangeProfile(DirectionOption, IProfile[]) - Method in interface nxopen.die.RotorBuilder

Sets the end of flange profile of the die rotor casting.

setEndOffset(double) - Method in interface nxopen.AutomaticTraceline

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setEndOffset(double) - Method in interface nxopen.cam.RoughFinishTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setEndOffset(String) - Method in interface nxopen.geometricutilities.FeatureOffset

Deprecated.

Deprecated in NX8.5.0. To set the value of the expression modify the expression directly using GeometricUtilities.FeatureOffset#endOffset and Expression.setRightHandSide(java.lang.String) .

setEndOffsetAState(BeamEADBuilder.State) - Method in interface nxopen.cae.BeamEADBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setEndOffsetBState(BeamEADBuilder.State) - Method in interface nxopen.cae.BeamEADBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setEndOffsetLock(boolean) - Method in interface nxopen.routing.OverstockBuilder

License requirements: routing_advanced ("Routing Advanced") OR routing_harness ("Routing Harness") OR routing_cabling ("Routing Cabling") OR routing_pipetube ("Routing Piping and Tubing") OR routing_hvac ("Routing HVAC") OR routing_platform ("Routing Platform") OR routing_pid ("Routing PID")
.

setEndOrientation(ISurface[]) - Method in interface nxopen.die.RotorBuilder

Sets the end orientation of the rotor casting.

setEndOrientation(ISurface) - Method in interface nxopen.die.SteelInsertBuilder

Sets the end orientation of the steelinsert
License requirements: ug_die_design ("Die Design")
.

setEndParms(double) - Method in interface nxopen.routing.HealPath

Set end parameters.

setEndPercent(double) - Method in interface nxopen.cam.BladeCutLevels

License requirements: cam_base ("CAM BASE")
.

setEndPercentage(double) - Method in interface nxopen.cam.InspectionCurveFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setEndPercentage(double) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setEndPercentage(double) - Method in interface nxopen.features.SectionCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setEndPlane(ISurface) - Method in interface nxopen.die.TrimTaskBuilder

Sets the end plane of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.

setEndPlane(AeroFlangeBuilder.EndType, Plane) - Method in interface nxopen.features.sheetmetal.AeroFlangeBuilder

Set the end plane
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setEndPlane(Plane) - Method in interface nxopen.features.sheetmetal.AeroJoggleBuilder

Set the end plane
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setEndPlane(Plane) - Method in interface nxopen.features.sheetmetal.JoggleBuilder

License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setEndPlane(Plane) - Method in interface nxopen.features.shipdesign.PillarBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setEndPlane(Plane) - Method in interface nxopen.features.shipdesign.PlateChamferBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setEndPlane(Plane) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setEndPlaneSelected(boolean) - Method in interface nxopen.tooling.DieEngTrimTaskBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setEndPoint(Point) - Method in interface nxopen.annotations.RegionBuilder

License requirements: geometric_tol ("GDT")
.

setEndPoint(Point) - Method in interface nxopen.AutomaticTraceline

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setEndPoint(double) - Method in interface nxopen.cae.responsesimulation.ResponseResultsEvaluationSettingBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setEndPoint(Point) - Method in interface nxopen.cam.CircularAboutAxisMoveBuilder

License requirements: None.

setEndPoint(Point) - Method in interface nxopen.cam.FollowCurveMoveBuilder

License requirements: cam_base ("CAM BASE")
.

setEndPoint(Point) - Method in interface nxopen.cam.FollowPartMoveBuilder

License requirements: cam_base ("CAM BASE")
.

setEndPoint(Point3d) - Method in interface nxopen.cam.PathLinearMotion

License requirements: cam_base ("CAM BASE")
.

setEndPoint(Point) - Method in interface nxopen.cam.SplitSubopCommand

License requirements: None.

setEndPoint(Point) - Method in interface nxopen.cam.TabPointDataBuilder

License requirements: cam_base ("CAM BASE")
.

setEndPoint(Point) - Method in interface nxopen.cam.VectorDistanceMoveBuilder

License requirements: None.

setEndPoint(Point) - Method in interface nxopen.features.GeneralConicBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setEndPoint(Point) - Method in interface nxopen.features.GeodesicLineBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setEndPoint(Point) - Method in interface nxopen.geometricutilities.CurveExtensionBuilder

License requirements: features_modeling ("FEATURES MODELING")
.

setEndPoint(Point) - Method in interface nxopen.geometricutilities.ModlMotion

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setEndPoint(Point) - Method in interface nxopen.geometricutilities.SelectDividingObjectBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setEndPoint(Point) - Method in interface nxopen.geometricutilities.SplineExtensionBuilder

License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setEndPoint(Point3d) - Method in interface nxopen.Line

Sets the end point of the line
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setEndPoint(Point) - Method in interface nxopen.mechanicalrouting.PathTransitionBuilder

License requirements: routing_base ("Routing Basic")
.

setEndPoint(Point3d) - Method in interface nxopen.routing.HealPath

Set the end point.

setEndPoint(Point) - Method in interface nxopen.SketchConicBuilder

License requirements: None.

setEndPointDirection(Direction) - Method in interface nxopen.features.BridgeCurveBuilder

Deprecated.

Deprecated in NX8.5.0. Use BridgeCurveBuilderEx instead.

setEndpointDisplayColor(int) - Method in interface nxopen.preferences.SessionModeling

License requirements: None.

setEndpointDisplayInheritColor(boolean) - Method in interface nxopen.preferences.SessionModeling

License requirements: None.

setEndpointDisplayStyle(SessionModeling.EndpointDisplayStyleType) - Method in interface nxopen.preferences.SessionModeling

License requirements: None.

setEndPointOptions(AssociativeArcBuilder.EndOption) - Method in interface nxopen.features.AssociativeArcBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setEndPointOptions(AssociativeLineBuilder.EndOption) - Method in interface nxopen.features.AssociativeLineBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setEndPointReference(AssociativeArcBuilder.EndReference) - Method in interface nxopen.features.AssociativeArcBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setEndPointReference(AssociativeLineBuilder.EndReference) - Method in interface nxopen.features.AssociativeLineBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setEndPoints(Point3d, Point3d) - Method in interface nxopen.DatumAxis

Sets the end points of the datum axis
License requirements: solid_modeling ("SOLIDS MODELING")
.

setEndpoints(Point3d, Point3d) - Method in interface nxopen.Line

Sets the start and end points of the line
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setEndPoints(Point3d, Point3d) - Method in interface nxopen.routing.ISegment

Set the current location of the segment ends in ABS coordinates.

setEndPointX(double) - Method in interface nxopen.geometricanalysis.CurveContinuityBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setEndPointY(double) - Method in interface nxopen.geometricanalysis.CurveContinuityBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setEndPointZ(double) - Method in interface nxopen.geometricanalysis.CurveContinuityBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setEndPoleFixed(boolean) - Method in interface nxopen.features.MatchEdgeBuilder

License requirements: features_modeling ("FEATURES MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setEndPositionType(TeachmodeLinearMoveBuilder.EndPositionTypes) - Method in interface nxopen.cam.TeachmodeLinearMoveBuilder

License requirements: cam_base ("CAM BASE")
.

setEndProfileOriginCurveDirection(boolean) - Method in interface nxopen.routing.StockTransitionBuilder

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setEndRcps(ControlPoint, ControlPoint) - Method in interface nxopen.routing.ISegment

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setEndReferencePoint(Point) - Method in interface nxopen.features.BridgeCurveBuilder

Deprecated.

Deprecated in NX8.5.0. Use BridgeCurveBuilderEx instead.

setEndRegionPoint(Point) - Method in interface nxopen.features.sheetmetal.SMBoundaryConditionBuilder

License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setEndReleaseA1(BeamEADBuilder.EndReleaseSetting) - Method in interface nxopen.cae.BeamEADBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setEndReleaseA2(BeamEADBuilder.EndReleaseSetting) - Method in interface nxopen.cae.BeamEADBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setEndReleaseA3(BeamEADBuilder.EndReleaseSetting) - Method in interface nxopen.cae.BeamEADBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setEndReleaseA4(BeamEADBuilder.EndReleaseSetting) - Method in interface nxopen.cae.BeamEADBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setEndReleaseA5(BeamEADBuilder.EndReleaseSetting) - Method in interface nxopen.cae.BeamEADBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setEndReleaseA6(BeamEADBuilder.EndReleaseSetting) - Method in interface nxopen.cae.BeamEADBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setEndReleaseAState(BeamEADBuilder.State) - Method in interface nxopen.cae.BeamEADBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setEndReleaseB1(BeamEADBuilder.EndReleaseSetting) - Method in interface nxopen.cae.BeamEADBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setEndReleaseB2(BeamEADBuilder.EndReleaseSetting) - Method in interface nxopen.cae.BeamEADBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setEndReleaseB3(BeamEADBuilder.EndReleaseSetting) - Method in interface nxopen.cae.BeamEADBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setEndReleaseB4(BeamEADBuilder.EndReleaseSetting) - Method in interface nxopen.cae.BeamEADBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setEndReleaseB5(BeamEADBuilder.EndReleaseSetting) - Method in interface nxopen.cae.BeamEADBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setEndReleaseB6(BeamEADBuilder.EndReleaseSetting) - Method in interface nxopen.cae.BeamEADBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setEndReleaseBState(BeamEADBuilder.State) - Method in interface nxopen.cae.BeamEADBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setEndRevolveAngle(double) - Method in interface nxopen.cae.AxiSymmetricParameters

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setEndSection(Section) - Method in interface nxopen.features.sheetmetal.LoftedFlangeBuilder

Sets the end section of the lofted flange.The section profile should be open looped.

setEndSection(boolean) - Method in interface nxopen.geometricutilities.SecondarySectionData

License requirements: None.

setEndSectionPoint(Point3d) - Method in interface nxopen.features.sheetmetal.LoftedFlangeBuilder

Sets the start/end point of the end section.It can be start/end point of the section profile.

setEndShape(RunnerBuilder.GuideEndType) - Method in interface nxopen.tooling.RunnerBuilder

License requirements: None.

setEndSketch(SketchFeature) - Method in interface nxopen.features.sheetmetal.LoftedFlangeBuilder

Sets the end section sketch as slave.

setEndStep(double) - Method in interface nxopen.cam.DmTrimExtend

License requirements: cam_base ("CAM BASE")
.

setEndSurfaceDirectionOption(BridgeCurveBuilder.SurfaceDirectionTypes) - Method in interface nxopen.features.BridgeCurveBuilder

Deprecated.

Deprecated in NX8.5.0. Use BridgeCurveBuilderEx instead.

setEndTangentDirection(TransitionCurveBuilder.TangentDirections) - Method in interface nxopen.geometricutilities.TransitionCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setEndToEnd(boolean) - Method in interface nxopen.geometricutilities.MatchSurfaceBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING")
.

setEndToolAxis(Direction) - Method in interface nxopen.cam.FollowCurveMoveBuilder

License requirements: cam_base ("CAM BASE")
.

setEndTreatmentType(PillarBuilder.EndTreatmentTypes) - Method in interface nxopen.features.shipdesign.PillarBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setEndType(InspectionCparlnFeatureBuilder.EndTypes) - Method in interface nxopen.cam.InspectionCparlnFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setEndType(BeadBuilder.EndTypeOptions) - Method in interface nxopen.features.sheetmetal.BeadBuilder

Sets the bead end type .

setEndType(LouverBuilder.EndTypeOptions) - Method in interface nxopen.features.sheetmetal.LouverBuilder

Sets the end type for the louver.

setEndType(MiterOptions.TypeOptions) - Method in interface nxopen.features.sheetmetal.MiterOptions

Sets the miter end type.

setEndTypeOption(PillarBuilder.EndTypeOptions) - Method in interface nxopen.features.shipdesign.PillarBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setEndUDistance(double) - Method in interface nxopen.cam.InspectionSurfaceFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setEndUMode(InspectionMethodBuilder.UVModeTypes) - Method in interface nxopen.cam.InspectionUVGridBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setEndUPercent(double) - Method in interface nxopen.cam.InspectionSurfaceFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setEndValue(double) - Method in interface nxopen.cae.responsesimulation.FrequencyDefinition

License requirements: nx_response_anlys ("NX Response Analysis")
.

setEndValue(String) - Method in interface nxopen.features.sheetmetal.MiterOptions

Deprecated.

Deprecated in NX10.0.0. Use Expression.setRightHandSide(java.lang.String) on the Expression object returned from Features.SheetMetal.MiterOptions#getEndValue instead.

setEndVDistance(double) - Method in interface nxopen.cam.InspectionSurfaceFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setEndVector(Direction) - Method in interface nxopen.features.BridgeCurveBuilderEx

License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_1 ("basic freeform modeling")
.

setEndVector(Vector3d) - Method in interface nxopen.routing.HealPath

Set the end vector.

setEndVector(boolean) - Method in interface nxopen.weld.FilletBuilder

License requirements: ugweld ("UG WELD")
.

setEndVectorObject(Direction) - Method in interface nxopen.features.BridgeCurveBuilder

Deprecated.

Deprecated in NX8.5.0. Use BridgeCurveBuilderEx instead.

setEndVMode(InspectionMethodBuilder.UVModeTypes) - Method in interface nxopen.cam.InspectionUVGridBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setEndVPercent(double) - Method in interface nxopen.cam.InspectionSurfaceFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setEnergyLoss(boolean) - Method in interface nxopen.motion.TirePropertyCdBuilder

License requirements: mechanisms ("MECHANISMS")
.

setEnforcedConstraints(boolean) - Method in interface nxopen.AttributeTemplatesBuilder

License requirements: None.

setEnforcePiecePart(Tag, boolean) - Method in interface nxopen.uf.UFPart

Refer to UF_PART_set_enforce_piece_part for documentation.

setEngage(NXColor) - Method in interface nxopen.cam.PathDisplayColors

License requirements: cam_base ("CAM BASE")
.

setEngageFeedRate(double) - Method in interface nxopen.cam.HoleMakingBuilder

License requirements: cam_base ("CAM BASE")
.

setEngagement(double) - Method in interface nxopen.routing.IAxisPort

The engagment distance of a IAxisPort , i.e. the distance behind the port that another fitting or stock may engage
License requirements: routing_base ("Routing Basic")

Created in NX4.0.0

setEngagement(double) - Method in interface nxopen.routing.PortConnection

Sets the engagement distance between the two ports connected by a Port Connection object.

setEngagementObject(Expression) - Method in interface nxopen.routing.IAxisPort

Sets the engagement object of a port, i.e. an expression representing the distance behind the port that another fitting or stock may engage
License requirements: routing_base ("Routing Basic")

Created in NX4.0.0

setEngageRetractType(NcmEngRetBuilder.EngageRetractTypes) - Method in interface nxopen.cam.NcmEngRetBuilder

License requirements: cam_base ("CAM BASE")
.

setEngageRetractType(TurnEngageRetractBuilder.Types) - Method in interface nxopen.cam.TurnEngageRetractBuilder

License requirements: cam_base ("CAM BASE")
.

setEngageRetractType(TurnThreadEngageRetractBuilder.EngageRetractTypes) - Method in interface nxopen.cam.TurnThreadEngageRetractBuilder

License requirements: cam_base ("CAM BASE")
.

setEngageType(NcmLaserEngage.Type) - Method in interface nxopen.cam.NcmLaserEngage

License requirements: cam_base ("CAM BASE")
.

setEnglishScale(ExpansionDrawingBuilder.JaExpansiondrawingbuilderEnglishScale) - Method in interface nxopen.features.shipdesign.ExpansionDrawingBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setEnglishSheetTemplateLocation(String) - Method in interface nxopen.drawings.DrawingSheetBuilder

License requirements: drafting ("DRAFTING")
.

setEngravingAmplitude(double) - Method in interface nxopen.display.DecalBuilder

License requirements: None.

setEngravingSoftness(double) - Method in interface nxopen.display.DecalBuilder

License requirements: None.

setEngRetMaxToolAxisChange(double) - Method in interface nxopen.cam.NcmSmoothingBuilder

License requirements: cam_base ("CAM BASE")
.

setEngRetTolerance(double) - Method in interface nxopen.cam.NcmSmoothingBuilder

License requirements: cam_base ("CAM BASE")
.

setEngRetToleranceSource(NcmSmoothingBuilder.SmoothToleranceSources) - Method in interface nxopen.cam.NcmSmoothingBuilder

License requirements: cam_base ("CAM BASE")
.

setEngRetType(NcmHoleMachiningEngRet.EngRetTypes) - Method in interface nxopen.cam.NcmHoleMachiningEngRet

License requirements: cam_base ("CAM BASE")
.

setEngRetType(NcmPlanarEngRetBuilder.EngRetTypes) - Method in interface nxopen.cam.NcmPlanarEngRetBuilder

License requirements: cam_base ("CAM BASE")
.

setEngRetType(NcmScEngRetBuilder.EngRetTypes) - Method in interface nxopen.cam.NcmScEngRetBuilder

License requirements: cam_base ("CAM BASE")
.

setEnlarge(boolean) - Method in interface nxopen.tooling.SplitSolidBuilder

License requirements: None.

setEnlargedSurfaceData(double[]) - Method in interface nxopen.tooling.SplitSolidBuilder

Keep enlarged surface data to create enlarged surface.

setEnlargeOtherFaceOption(boolean) - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder

License requirements: None.

setEnterTextString(String[]) - Method in interface nxopen.linedesigner.HoleFeatureBuilder

Sets the enter text string
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setEntireComponentPattern(boolean) - Method in interface nxopen.tooling.PocketBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setEntirePartRefset(Component) - Method in interface nxopen.assemblies.ComponentAssembly

Convenience method for setting the reference set used to represent a component to be the entire part.

setEntities(TaggedObject[]) - Method in interface nxopen.cae.CaeGroup

Set entities in to the group
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setEntities(DisplayableObject[]) - Method in interface nxopen.cae.ResultMeasureModelSubsetGeom

Set the geometry entities
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setEntity(NXObject) - Method in interface nxopen.geometricutilities.MovePoleBuilder

License requirements: None.

setEntityIds(boolean, int[]) - Method in interface nxopen.cae.PostGraphBuilder

Set entity ids for extracting result data
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setEntityIds(int[]) - Method in interface nxopen.cae.PostGraphOrbitBuilder

Set entity ids for extracting result data
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setEntityNames(Step203Creator.EntityNameOption) - Method in interface nxopen.Step203Creator

Deprecated.

Deprecated in NX11.0.0. Use StepCreator instead.

setEntityNames(Step214Creator.EntityNameOption) - Method in interface nxopen.Step214Creator

Deprecated.

Deprecated in NX11.0.0. Use StepCreator instead.

setEntityNames(StepCreator.EntityNameOption) - Method in interface nxopen.StepCreator

License requirements: None.

setEntityObjects(TaggedObject[]) - Method in interface nxopen.cae.PostGraphBuilder

Sets the entity objects for extracting result data.

setEntityObjects(TaggedObject[]) - Method in interface nxopen.cae.ResultProbeBuilder

Sets the entity objects for extracting result data.

setEntityOption(NodeElementInfoBuilder.EntityType) - Method in interface nxopen.cae.NodeElementInfoBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setEntityOption(ThicknessBuilder.EntityType) - Method in interface nxopen.cae.ThicknessBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setEntityType(int) - Method in interface nxopen.blockstyler.BodyCollector

License requirements: None.

setEntityType(int) - Method in interface nxopen.blockstyler.CurveCollector

License requirements: None.

setEntityType(int) - Method in interface nxopen.blockstyler.FaceCollector

License requirements: None.

setEntityType(int) - Method in interface nxopen.blockstyler.SectionBuilder

License requirements: None.

setEntityType(int) - Method in interface nxopen.blockstyler.SuperPoint

License requirements: None.

setEntityType(int) - Method in interface nxopen.blockstyler.SuperSection

License requirements: None.

setEntityType(GeometryLocationData.EntityTypes) - Method in interface nxopen.geometricutilities.GeometryLocationData

License requirements: None.

setEntranceDiameter(double) - Method in interface nxopen.cam.Cycle

License requirements: cam_base ("CAM BASE")
.

setEntryAvoidance(boolean) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setEntryExitDistance(double) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setEntryMethodOption(InitialConditions.EntryMethod) - Method in interface nxopen.cae.responsesimulation.InitialConditions

License requirements: nx_response_anlys ("NX Response Analysis")
.

setEntryPoint(boolean) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setEntryTransition(InspectionMethodBuilder.TransitionTypes) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setEnum(String, int) - Method in interface nxopen.blockstyler.PropertyList

Sets the value for the given property name.

setEnum(String, int) - Method in interface nxopen.PropertyContainer

Sets the value for the given property name.

setEnumAsString(String, String) - Method in interface nxopen.blockstyler.PropertyList

Sets the value for the given property name.

setEnumAsString(String, String) - Method in interface nxopen.PropertyContainer

Sets the value for the given property name.

setEnumAttributeName(AssemblyDrawingBuilder.AttributeNames) - Method in interface nxopen.tooling.AssemblyDrawingBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setEnumAttributeValue(AssemblyDrawingBuilder.AttributeValues) - Method in interface nxopen.tooling.AssemblyDrawingBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setEnumCompList(BomBuilder.TreeList) - Method in interface nxopen.tooling.BomBuilder

License requirements: None.

setEnumCylinderType(BomBuilder.Circle) - Method in interface nxopen.tooling.BomBuilder

License requirements: None.

setEnumDrawingType(AssemblyDrawingBuilder.DrawingTypes) - Method in interface nxopen.tooling.AssemblyDrawingBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setEnumerationOptions(String[]) - Method in interface nxopen.report.EnumerationArgument

Sets the enumeration options.

setEnumMembers(String[]) - Method in interface nxopen.blockstyler.Enumeration

Sets the Enum members.

setEnumMembers(String, String[]) - Method in interface nxopen.blockstyler.PropertyList

Sets the enum members for the given property of type enum.

setEnumMembers(String, String[]) - Method in interface nxopen.PropertyContainer

Sets the enum members for the given property of type enum.

setEnumMethod(FilletBuilder.EnumSkipWeldMethod) - Method in interface nxopen.weld.FilletBuilder

License requirements: ugweld ("UG WELD")
.

setEnumParameterExtent(InspectionToleranceOperationBuilder.ParamExtent) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setEnumParamPriMatModifier(InspectionToleranceOperationBuilder.ParamPriDatumModifier) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setEnumParamPriMatModifier1(InspectionToleranceOperationBuilder.ParamPriDatumModifier) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setEnumParamSecMatModifier(InspectionToleranceOperationBuilder.ParamSecDatumModifier) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setEnumParamSecMatModifier1(InspectionToleranceOperationBuilder.ParamSecDatumModifier) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setEnumParamSubType(InspectionToleranceOperationBuilder.ParamSubType) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setEnumParamTerMatModifier(InspectionToleranceOperationBuilder.ParamTerDatumModifier) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setEnumParamTerMatModifier1(InspectionToleranceOperationBuilder.ParamTerDatumModifier) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setEnumParamTolMatModifier(InspectionToleranceOperationBuilder.ParamTolMatModifier) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setEnumParamTolMatModifier1(InspectionToleranceOperationBuilder.ParamTolMatModifier) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setEnumParamTolMatModifierDup(InspectionToleranceOperationBuilder.ParamTolMatModifierDup) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setEnumParamTolZoneShape(InspectionToleranceOperationBuilder.ParamTolZoneShape) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setEnumParamTolZoneShape1(InspectionToleranceOperationBuilder.ParamTolZoneShape) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setEnumParamXYZAxis(InspectionToleranceOperationBuilder.ParamXYZAxis) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setEnumPCSABS(InspectionToleranceOperationBuilder.SirVecPCSABS) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setEnumPostCrossStyle(RailingFeatureBuilder.SelPostcrossStyle) - Method in interface nxopen.linedesigner.RailingFeatureBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setEnumRailCrossStyle(RailingFeatureBuilder.RailCrossStyle) - Method in interface nxopen.linedesigner.RailingFeatureBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setEnumSensitivity(int[]) - Method in interface nxopen.blockstyler.Enumeration

Sets EnumSensitivity
License requirements: None.

setEnumSheets(AssemblyDrawingBuilder.DrawingCreateOrEdit) - Method in interface nxopen.tooling.AssemblyDrawingBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setEnumSpacing(VentilationHoles2Builder.ArraySpacing) - Method in interface nxopen.features.shipdesign.VentilationHoles2Builder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setEnumSpacingType(RailingFeatureBuilder.SpaceType) - Method in interface nxopen.linedesigner.RailingFeatureBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setEnumStockStyle(StockStyleBuilder.StockStyle) - Method in interface nxopen.routing.StockStyleBuilder

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setEnumStockType(BomBuilder.Shape) - Method in interface nxopen.tooling.BomBuilder

License requirements: None.

setEnumTorusCharacteristic(InspectionToleranceOperationBuilder.ParamXYZAxis) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setEnumType(ObjectAttributeReferenceBuilder.LeaderType) - Method in interface nxopen.formboard.ObjectAttributeReferenceBuilder

License requirements: routing_harness ("Routing Harness")
.

setEnumTypeOutput(InspectionOutputOperationBuilder.TypeOutput) - Method in interface nxopen.cam.InspectionOutputOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setEnumValue(int) - Method in interface nxopen.display.IrayPlusMatAttrEnum

License requirements: None.

setEnumVisibility(int[]) - Method in interface nxopen.blockstyler.Enumeration

Sets EnumVisibility
License requirements: None.

setEnvelopeConcavity(double) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setEnvelopeOffset(TireEnvelopeBuilder.EnvelopeOffsetMethod) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setEnvelopeVal(AxiSymmetricParameters.EnvVal) - Method in interface nxopen.cae.AxiSymmetricParameters

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setEnvironmentMapEnum(TrueShadingBuilder.EnvironmentMapType) - Method in interface nxopen.display.TrueShadingBuilder

License requirements: None.

setEnvironmentMapFileBrowser(String) - Method in interface nxopen.display.TrueShadingBuilder

License requirements: None.

setEnvironmentVariableValue(String, String) - Method in interface nxopen.Session

Sets the value of a NX enviroment variable
License requirements: None.

setEnvValue(CyclicSymmetricParameters.EnvelopeValue) - Method in interface nxopen.cae.CyclicSymmetricParameters

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setEnvVarName(String) - Method in interface nxopen.cam.UserDefinedOprBuilder

License requirements: None.

setEqualArcLengthMethod(ProjectCurveBuilder.ArcLengthType) - Method in interface nxopen.features.ProjectCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setEqualArcLengthSegments(int) - Method in interface nxopen.features.DivideCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setEqualDiameterEnabled(boolean) - Method in interface nxopen.features.FaceRecognitionBuilder

License requirements: gateway ("UG GATEWAY")
.

setEqualDimensionCompareTolerance(double) - Method in interface nxopen.drafting.AutomationPreferencesBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setEqualDimensionTolerance(double) - Method in interface nxopen.drafting.AutomationRuleBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setEqualLength(boolean) - Method in interface nxopen.InferredConstraintsBuilder

License requirements: None.

setEqualLength(boolean) - Method in interface nxopen.SketchAutoConstrainBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setEqualParameterSegments(int) - Method in interface nxopen.features.DivideCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setEqualRadius(boolean) - Method in interface nxopen.InferredConstraintsBuilder

License requirements: None.

setEqualRadius(boolean) - Method in interface nxopen.SketchAutoConstrainBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setEqualRadiusEnabled(boolean) - Method in interface nxopen.features.CurveFinderBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setEqualRadiusSketchGroupEnabled(boolean) - Method in interface nxopen.features.CurveFinderBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setEqualSegmentMethod(DivideCurveBuilder.EqualSegmentOption) - Method in interface nxopen.features.DivideCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setEqualSegmentsOption(SubdivideSegmentBuilder.EqualSegmentsMethod) - Method in interface nxopen.routing.SubdivideSegmentBuilder

License requirements: routing_base ("Routing Basic")
.

setEquidistantStock(double) - Method in interface nxopen.cam.BoundaryTurnBlank

License requirements: cam_base ("CAM BASE")
.

setEquivalentStressMethod(DurabilityEventFatigueSettingsBuilder.EquivalentStressMethodEnum) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setErectionSplitSystem(boolean) - Method in interface nxopen.features.shipdesign.SeamBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setErrorCode(int) - Method in interface nxopen.drafting.DrawingAutomationWizard

Sets the error code to be returned from the callback
License requirements: None.

setErrorCode(int) - Method in interface nxopen.features.CustomFeatureEvent

License requirements: solid_modeling ("SOLIDS MODELING")
.

setErrorHndl(ResultProbeBuilder.ErrorHandling) - Method in interface nxopen.cae.ResultProbeBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setErrorLimit(int) - Method in interface nxopen.drawings.ConversionProcessSettingsBuilder

License requirements: convert_to_pmi (" Convert To PMI"), drafting ("DRAFTING")
.

setErrorMessage(String) - Method in interface nxopen.weld.WeldJointBuilder

Sets an error message to display
License requirements: structure_weld ("STRUCTURE WELD")
.

setErrorReduction(double) - Method in interface nxopen.mechatronics.PreferencesBuilder

Deprecated.

Deprecated in NX9.0.0. This functionality is no longer supported.

setEssentialThinning(double) - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setEvaluationErrorOption(ResultsCombinationBuilder.EvaluationError) - Method in interface nxopen.cae.ResultsCombinationBuilder

Set evaluation error option
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setEvaluationErrorOption(ResultsReductionBuilder.EvaluationError) - Method in interface nxopen.cae.ResultsReductionBuilder

Set evaluation error option
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setEvaluationErrorOption(TransientResultsReductionBuilder.EvaluationError) - Method in interface nxopen.cae.TransientResultsReductionBuilder

Set evaluation error option
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setEvaluationMethod(RmsLcrEvaluationMethod) - Method in interface nxopen.cae.responsesimulation.RmsResultsEvaluationSettingBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setEvaluationMethodOption(CombinationEvaluationOptions.EvaluationMethod) - Method in interface nxopen.cae.responsesimulation.CombinationEvaluationOptions

License requirements: nx_response_anlys ("NX Response Analysis")
.

setEvaluationMode(GapFlushnessBuilder.EvaluationModes) - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setEvaluationPoint(Point) - Method in interface nxopen.features.shipdesign.RollingLineBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setEvaluationPoint(Point) - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setEvaluationPointOption(RollingLineBuilder.StartEvaluationTypes) - Method in interface nxopen.features.shipdesign.RollingLineBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setEvaluationPoints(double[], Unit[]) - Method in interface nxopen.cae.SimBcPlotContoursBuilder

Sets evaluation point
License requirements: nx_masterfem ("Finite Element Modeling")
.

setEvaluationType(FrequencyDefinition.Definition) - Method in interface nxopen.cae.responsesimulation.FrequencyDefinition

License requirements: nx_response_anlys ("NX Response Analysis")
.

setEvaluationType(GapFlushnessBuilder.EvaluationTypes) - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder

Sets the evaluation type
License requirements: solid_modeling ("SOLIDS MODELING")
.

setEvalutionErrorsOption(PostGraphBuilder.EvalutionErrors) - Method in interface nxopen.cae.PostGraphBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setEvenComplexData(double, double, double[], double[]) - Method in interface nxopen.cae.ftk.ArrayRecord2DEven

Sets even complex data
License requirements: nx_ftk ("NX Advanced Graphing")
.

setEvenRealData(double, double, double[]) - Method in interface nxopen.cae.ftk.ArrayRecord2DEven

Sets even real data
License requirements: nx_ftk ("NX Advanced Graphing")
.

setEventCondition(SignalChartListItem.Condition) - Method in interface nxopen.motion.SignalChartListItem

License requirements: nx_motion_motor ("NX Motion Motor")
.

setEventDamage(boolean) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setEventDamage(boolean) - Method in interface nxopen.cae.DurabilityRandomFatigueBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setEventDamage(boolean) - Method in interface nxopen.cae.DurabilityResultsReportBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setEventDamageDirection(boolean) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setEventFlag(boolean) - Method in interface nxopen.cam.LaserControlPoint

License requirements: cam_base ("CAM BASE")
.

setEventLife(boolean) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setEventLife(boolean) - Method in interface nxopen.cae.DurabilityRandomFatigueBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setEventLife(boolean) - Method in interface nxopen.cae.DurabilityResultsReportBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setEventName(String) - Method in interface nxopen.cae.DurabilityEventBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setEventName(String) - Method in interface nxopen.cae.LaminateRandomEventBuilder

Deprecated.

Deprecated in NX10.0.0. Use LaminateDynamicEventBuilder.setDynamicEventName(java.lang.String) instead.

setEventName(String, boolean) - Method in interface nxopen.cae.responsesimulation.RSEvent

Sets the event name
License requirements: nx_response_anlys ("NX Response Analysis")
.

setEventType(RSEvent.Type) - Method in interface nxopen.cae.responsesimulation.RSEventBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setExact(boolean) - Method in interface nxopen.MeasureAngleBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setExact(boolean) - Method in interface nxopen.MeasureDistanceBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setExactBinderProfiles(boolean) - Method in interface nxopen.tooling.DieDesignLowerBinderBuilder

License requirements: ug_die_design ("Die Design")
.

setExactSheetbodyOption(boolean) - Method in interface nxopen.tooling.DieDesDrawDieBuilder

License requirements: ug_die_design ("Die Design")
.

setExactSheetbodyOption(boolean) - Method in interface nxopen.tooling.DieDesDrawPunchBuilder

License requirements: ug_die_design ("Die Design")
.

setExampleDesc(String) - Method in interface nxopen.mechatronics.FunctionObjectBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setExcitationAxis(LaminateRandomEventBuilder.ExcitationAxisEnum) - Method in interface nxopen.cae.LaminateRandomEventBuilder

Deprecated.

Deprecated in NX10.0.0. Use LaminateDynamicEventBuilder.setExcitationSelectedAxis(nxopen.cae.LaminateDynamicEventBuilder.ExcitationSelectedAxisEnum) instead.

setExcitationCoordinateSystem(CoordinateSystem) - Method in interface nxopen.cae.LaminateRandomEventBuilder

Deprecated.

Deprecated in NX10.0.0. Use LaminateDynamicEventBuilder.setExcitationCsys(nxopen.CoordinateSystem) instead.

setExcitationCsys(CoordinateSystem) - Method in interface nxopen.cae.LaminateDynamicEventBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setExcitationLocationId(int) - Method in interface nxopen.cae.responsesimulation.ExcitationLocationDefinition

License requirements: nx_response_anlys ("NX Response Analysis")
.

setExcitationLocationType(ExcitationBuilder.ExcitationLocationType) - Method in interface nxopen.cae.responsesimulation.ExcitationLocationDefinition

License requirements: nx_response_anlys ("NX Response Analysis")
.

setExcitationName(String) - Method in interface nxopen.cae.DurabilityExcitationBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setExcitationName(String) - Method in interface nxopen.cae.responsesimulation.Excitation

License requirements: nx_response_anlys ("NX Response Analysis")
.

setExcitationSelectedAxis(LaminateDynamicEventBuilder.ExcitationSelectedAxisEnum) - Method in interface nxopen.cae.LaminateDynamicEventBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setExcitationType(DurabilityStaticEventBuilder.ExcitationTypeEnum) - Method in interface nxopen.cae.DurabilityStaticEventBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setExcludeDatumsFromFit(boolean) - Method in interface nxopen.preferences.SessionVisualizationScreen

Sets the option to specify whether datum objects and planar ship grids should not be examined when a Fit is done.

setExcludeElementsNotVisible(boolean) - Method in interface nxopen.cae.ResultParameters

Exclude or include elements which are not visible for computing with sum option.

setExcludeFromSpatialSearch(boolean) - Method in interface nxopen.pdm.ModelElementRevision

Set or unset this model element revision from exclusion from spatial search.

setExcludeNonOwnerParts(boolean) - Method in interface nxopen.validate.ValidatorOptions

License requirements: None.

setExcludeReadonlyParts(boolean) - Method in interface nxopen.validate.ValidatorOptions

License requirements: None.

setExcludeRules(Tag, int) - Method in interface nxopen.uf.UFClear

Deprecated.

The equivalent Open C method has retired

setExcludesColor(NXColor) - Method in interface nxopen.cae.BCSelectionDisplayBuilder

License requirements: None.

setExecuteMode(DisplayChangerBuilder.ExecuteModes) - Method in interface nxopen.mechatronics.DisplayChangerBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setExecuteMode(ReadWriteDeviceBuilder.ExecuteMode) - Method in interface nxopen.mechatronics.ReadWriteDeviceBuilder

Sets execute mode.

setExecuteOnce(boolean) - Method in interface nxopen.mechatronics.ObjectTransformerBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setExistingAutomaticAnnotation(DrawingAnnotationBuilder.Annotation) - Method in interface nxopen.features.shipdesign.DrawingAnnotationBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setExistingAutomaticAnnotationOption(AnnotateViewsBuilder.ExistingAutomaticAnnotation) - Method in interface nxopen.drafting.AnnotateViewsBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setExistingEefFile(String) - Method in interface nxopen.cae.responsesimulation.InitialConditions

License requirements: nx_response_anlys ("NX Response Analysis")
.

setExistingPartAction(PartOperationImportBuilder.ExistingPartAction) - Method in interface nxopen.pdm.NativePartLogicalObject

Sets the existing part action defined for this part
License requirements: assemblies ("ASSEMBLIES MODULE")
.

setExistingPartAttributes(LogicalObject, String) - Method in interface nxopen.pdm.PartOperationImportBuilder

Set attributes of existing part on the given logical object so that the part gets imported into specified existing item based on action.

setExistingPlane(DisplayableObject) - Method in interface nxopen.geometricutilities.SupportPlaneData

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setExitAvoidance(boolean) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setExitLoop(boolean) - Method in interface nxopen.tooling.TraverseLoopBuilder

License requirements: None.

setExitPoint(boolean) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setExitTransition(InspectionMethodBuilder.TransitionTypes) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setExpandChildNodes(boolean) - Method in interface nxopen.features.shipdesign.ShipNavigatorNodeBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setExpanded(boolean) - Method in interface nxopen.blockstyler.UIBlock

License requirements: None.

setExpandedFiles(String[]) - Method in interface nxopen.annotations.ImportSymbolBuilder

Sets the names of the expanded files
License requirements: nx_layout ("NX Layout")
.

setExperience(int) - Method in interface nxopen.cam.ProbeControlParametersBuilder

License requirements: None.

setExploreReport(VisualReportExplorer.ExploreReportOption) - Method in interface nxopen.visualreporting.VisualReportExplorer

License requirements: None.

setExplosion(boolean) - Method in interface nxopen.userdefinedtemplate.InstantiationBuilder

License requirements: usr_defined_features ("USER DEFINED FEATURES")
.

setExpName(String) - Method in interface nxopen.motion.ResultMeasureBuilder

License requirements: mechanisms ("MECHANISMS")
.

setExportAs(DxfdwgCreator.ExportAsOption) - Method in interface nxopen.DxfdwgCreator

License requirements: None.

setExportAs(StepCreator.ExportAsOption) - Method in interface nxopen.StepCreator

License requirements: None.

setExportAttributesName(String[]) - Method in interface nxopen.mechatronics.ECADExportBuilder

Deprecated.

Deprecated in NX9.0.0. This method has no replacement. It is no longer supported.

setExportControlData(String) - Method in interface nxopen.tooling.MotionSimulationBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setExportData(ResultParameters[], int[], CreateJtBuilder.Component[]) - Method in interface nxopen.cae.CreateJtBuilder

The result parameters
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setExportData(DxfdwgCreator.ExportDataOption) - Method in interface nxopen.DxfdwgCreator

License requirements: None.

setExportData(NXTo2dCreator.ExportDataOption) - Method in interface nxopen.NXTo2dCreator

License requirements: None.

setExportDrawingFile(boolean) - Method in interface nxopen.tooling.RenameAndExportComponentBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setExportDrawings(boolean) - Method in interface nxopen.IgesCreator

License requirements: None.

setExportedAttributes(String[]) - Method in interface nxopen.weld.ExportWeldBuilder

Set the attributes of weld points to be exported to CSV file
License requirements: ugweld ("UG WELD")
.

setExportExtRef(boolean) - Method in interface nxopen.Step203Creator

Deprecated.

Deprecated in NX11.0.0. Use StepCreator instead.

setExportExtRef(boolean) - Method in interface nxopen.Step214Creator

Deprecated.

Deprecated in NX11.0.0. Use StepCreator instead.

setExportExtRef(boolean) - Method in interface nxopen.StepCreator

License requirements: None.

setExportExtRefStructureAs(Step203Creator.ExternalReferenceStructureOption) - Method in interface nxopen.Step203Creator

Deprecated.

Deprecated in NX11.0.0. Use StepCreator instead.

setExportExtRefStructureAs(Step214Creator.ExternalReferenceStructureOption) - Method in interface nxopen.Step214Creator

Deprecated.

Deprecated in NX11.0.0. Use StepCreator instead.

setExportExtRefStructureAs(StepCreator.ExternalReferenceStructureOption) - Method in interface nxopen.StepCreator

License requirements: None.

setExportFacesAs(DxfdwgCreator.ExportFacesAsOptions) - Method in interface nxopen.DxfdwgCreator

License requirements: None.

setExportFile(String) - Method in interface nxopen.mechatronics.ECADExportBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setExportFile(String) - Method in interface nxopen.mechatronics.ExportSensorsActuatorsBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setExportFile(String) - Method in interface nxopen.mechatronics.SCOUTExportBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setExportFileFormat(ECADExportBuilder.ExportFileType) - Method in interface nxopen.mechatronics.ECADExportBuilder

Deprecated.

Deprecated in NX9.0.0. This method has no replacement. It is no longer supported.

setExportFileFormat(SCOUTExportBuilder.ExportFileType) - Method in interface nxopen.mechatronics.SCOUTExportBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setExportFormatInLegacyFile(boolean) - Method in interface nxopen.preferences.RoutingElectrical

Sets the option to export the format at the top of a legacy routelist file.

setExportFrom(Catiav5Creator.ExportFromOption) - Method in interface nxopen.Catiav5Creator

License requirements: None.

setExportFrom(DxfdwgCreator.ExportFromOption) - Method in interface nxopen.DxfdwgCreator

License requirements: None.

setExportFrom(IgesCreator.ExportFromOption) - Method in interface nxopen.IgesCreator

License requirements: None.

setExportFrom(NXTo2dCreator.ExportFromOption) - Method in interface nxopen.NXTo2dCreator

License requirements: None.

setExportFrom(Step203Creator.ExportFromOption) - Method in interface nxopen.Step203Creator

Deprecated.

Deprecated in NX11.0.0. Use StepCreator instead.

setExportFrom(Step214Creator.ExportFromOption) - Method in interface nxopen.Step214Creator

Deprecated.

Deprecated in NX11.0.0. Use StepCreator instead.

setExportFrom(StepCreator.ExportFromOption) - Method in interface nxopen.StepCreator

License requirements: None.

setExportMesh(boolean) - Method in interface nxopen.cae.ElementCreateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setExportMesh(boolean) - Method in interface nxopen.cae.ElementExtrudeBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setExportMesh(boolean) - Method in interface nxopen.cae.ElementProjectBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setExportMesh(boolean) - Method in interface nxopen.cae.ElementReflectBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setExportMesh(boolean) - Method in interface nxopen.cae.ElementRevolveBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setExportMesh(boolean) - Method in interface nxopen.cae.ElementTranslateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setExportMesh(boolean) - Method in interface nxopen.cae.Mesh2dBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setExportMeshProperty(boolean) - Method in interface nxopen.cae.Mesh

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setExportModelData(boolean) - Method in interface nxopen.IgesCreator

License requirements: None.

setExportMotion(String) - Method in interface nxopen.tooling.UserDefinedMotionBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setExportOption(BaseDataImportExportBuilder.ExportOptions) - Method in interface nxopen.features.vehicledesign.BaseDataImportExportBuilder

License requirements: gateway ("UG GATEWAY")
.

setExportScaleOption(DxfdwgCreator.ExportScaleOptions) - Method in interface nxopen.DxfdwgCreator

License requirements: None.

setExportScaleValue(String) - Method in interface nxopen.DxfdwgCreator

License requirements: None.

setExportSplinesAs(DxfdwgCreator.ExportSplinesAsOptions) - Method in interface nxopen.DxfdwgCreator

License requirements: None.

setExportToggleState(boolean) - Method in interface nxopen.cam.ManageToolPartBuilder

License requirements: None.

setExportToSolver(boolean) - Method in interface nxopen.cae.SurfaceCoatBuilder

License requirements: None.

setExpression(Expression) - Method in interface nxopen.AttributePropertiesBaseBuilder

License requirements: None.

setExpression(Expression) - Method in interface nxopen.drawings.ViewScaleBuilder

License requirements: drafting ("DRAFTING")
.

setExpression(Expression) - Method in interface nxopen.features.PartGeometryCopySelectBuilder

License requirements: gateway ("UG GATEWAY")
.

setExpression(String) - Method in interface nxopen.features.RPOBuilder

Sets the expression value in order to constrain the target and tool entities which are set using RPOBuilder.setTargetAndTool(nxopen.PositioningDimension.Subtype, nxopen.NXObject, nxopen.features.RPOBuilder.AssociativityType, nxopen.Point3d, nxopen.NXObject, nxopen.features.RPOBuilder.AssociativityType, nxopen.Point3d) .

setExpression(String) - Method in interface nxopen.features.RPODimension

Sets the expression of the dimension.

setExpression(Expression) - Method in interface nxopen.fields.ComplexScalarFieldWrapper

Sets the implementation of the wrapper to the specified expressions
License requirements: None.

setExpression(Expression) - Method in interface nxopen.fields.ScalarFieldWrapper

Sets the implementation of the wrapper to the specified expression
License requirements: None.

setExpression(String) - Method in interface nxopen.IPlane

Sets the plane expression.

setExpression(String) - Method in interface nxopen.positioning.Constraint

The expression used for constraint - only for distance or angle
License requirements: assemblies ("ASSEMBLIES MODULE")
.

setExpression(String) - Method in interface nxopen.routing.RoutePartDescriptor

License requirements: routing_base ("Routing Basic")
.

setExpressionDriven(boolean) - Method in interface nxopen.positioning.Constraint

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setExpressionForScale(Expression) - Method in interface nxopen.drawings.GeneralViewStyle

Sets the expression for scale
License requirements: drafting ("DRAFTING")
.

setExpressionMode(DrivingValueBuilder.DrivingExpressionMode) - Method in interface nxopen.annotations.DrivingValueBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setExpressionName(String) - Method in interface nxopen.annotations.DrivingValueBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setExpressionObject(TaggedObject) - Method in interface nxopen.blockstyler.AngularDimension

License requirements: None.

setExpressionObject(TaggedObject) - Method in interface nxopen.blockstyler.ExpressionBlock

License requirements: None.

setExpressionObject(TaggedObject) - Method in interface nxopen.blockstyler.LinearDimension

License requirements: None.

setExpressionObject(TaggedObject) - Method in interface nxopen.blockstyler.OnPathDimension

License requirements: None.

setExpressionObject(TaggedObject) - Method in interface nxopen.blockstyler.RadiusDimension

License requirements: None.

setExpressionOption(CopyPasteBuilder.ExpressionTransferOption) - Method in interface nxopen.features.CopyPasteBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setExpressionOption(PatternFeatureBuilder.ExpressionTransferOptions) - Method in interface nxopen.features.PatternFeatureBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setExpressionOption(SketchDimensionBuilder.ExpOption) - Method in interface nxopen.SketchDimensionBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setExpressions(Expression[]) - Method in interface nxopen.ExpressionGroup

Add expressions to an expression group
License requirements: None.

setExpressions(Expression[]) - Method in interface nxopen.features.MapleBuilder

Set the expressions in the Maple Builder
License requirements: solid_modeling ("SOLIDS MODELING")
.

setExpressions(Expression[]) - Method in interface nxopen.fields.VectorFieldWrapper

Sets the implementation of the wrapper to the specified expressions
License requirements: None.

setExpressions(Expression[], String[]) - Method in interface nxopen.InterpartExpressionsBuilder

Set an array of source expressions.

setExpressionsFor4gd(Component, Component, Expression[], String[]) - Method in interface nxopen.InterpartExpressionsBuilder

Interface for 4gd
License requirements: None.

setExpressionSortTypeAsString(String) - Method in interface nxopen.blockstyler.ChooseExpression

License requirements: None.

setExpressionStatureData(String) - Method in interface nxopen.features.HumanBuilder

Sets human stature data using expression
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setExpressionTypeIndexAsString(String) - Method in interface nxopen.blockstyler.ChooseExpression

License requirements: None.

setExpressionWeightData(String) - Method in interface nxopen.features.HumanBuilder

Sets human weight data using expression
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setExtendAcrossUndercut(boolean) - Method in interface nxopen.cam.MillCutParameters

License requirements: cam_base ("CAM BASE")
.

setExtendAngle(double) - Method in interface nxopen.cam.CircularAboutAxisMoveBuilder

License requirements: None.

setExtendAtConvexCorner(boolean) - Method in interface nxopen.cam.ToolAxisChange

License requirements: cam_base ("CAM BASE")
.

setExtendAtStart(CutParametersExtendAtStartMode) - Method in interface nxopen.cam.TurnCutParameters

License requirements: cam_base ("CAM BASE")
.

setExtendBendRelief(boolean) - Method in interface nxopen.features.sheetmetal.BendOptions

Sets the option to extend the bend relief if required.

setExtendBound(boolean) - Method in interface nxopen.SketchQuickExtendBuilder

License requirements: None.

setExtendBound(boolean) - Method in interface nxopen.SketchQuickTrimBuilder

License requirements: None.

setExtendBoundaryObject(boolean) - Method in interface nxopen.features.TrimSheetBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setExtendDirection(Axis) - Method in interface nxopen.cam.ToolPathEditorBuilder

License requirements: None.

setExtendDistance(double) - Method in interface nxopen.cam.CircularAboutAxisMoveBuilder

License requirements: None.

setExtendDistance(double) - Method in interface nxopen.cam.TurnEngageRetractBuilder

License requirements: cam_base ("CAM BASE")
.

setExtendDistance(double) - Method in interface nxopen.weld.WeldFillBuilder

License requirements: ugweld ("UG WELD")
.

setExtendEdges(FilletBuilder.EnumExtendEdges) - Method in interface nxopen.weld.FilletBuilder

License requirements: ugweld ("UG WELD")
.

setExtendEdgeToBoundaryToggle(boolean) - Method in interface nxopen.cae.EdgeFaceImprintBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setExtendedTicBegin(int) - Method in interface nxopen.annotations.FrameBarElementStyleBuilder

License requirements: nx_ship_drafting ("Ship Drafting") OR drafting ("DRAFTING")
.

setExtendedTicColor(int) - Method in interface nxopen.annotations.FrameBarElementStyleBuilder

License requirements: nx_ship_drafting ("Ship Drafting") OR drafting ("DRAFTING")
.

setExtendedTicFont(int) - Method in interface nxopen.annotations.FrameBarElementStyleBuilder

License requirements: nx_ship_drafting ("Ship Drafting") OR drafting ("DRAFTING")
.

setExtendedTicFrequency(int) - Method in interface nxopen.annotations.FrameBarElementStyleBuilder

License requirements: nx_ship_drafting ("Ship Drafting") OR drafting ("DRAFTING")
.

setExtendedTicLength(double) - Method in interface nxopen.annotations.FrameBarElementStyleBuilder

License requirements: nx_ship_drafting ("Ship Drafting") OR drafting ("DRAFTING")
.

setExtendedTicWidth(int) - Method in interface nxopen.annotations.FrameBarElementStyleBuilder

License requirements: nx_ship_drafting ("Ship Drafting") OR drafting ("DRAFTING")
.

setExtendEndFace(boolean) - Method in interface nxopen.features.shipdesign.ExcessMaterialBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setExtendFactor(double) - Method in interface nxopen.features.OffsetCurveBuilder

Deprecated.

Deprecated in NX11.0.0. Extend factor functionality is no longer supported.

setExtendFlange(boolean) - Method in interface nxopen.features.SilhouetteFlangeBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setExtendFloorTo(CutParametersExtendFloorTypes) - Method in interface nxopen.cam.MillCutParameters

License requirements: cam_base ("CAM BASE")
.

setExtendImprints(boolean) - Method in interface nxopen.features.shipdesign.DivideBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setExtendImprints(boolean) - Method in interface nxopen.features.shipdesign.PlateDivideBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setExtendImprints(boolean) - Method in interface nxopen.features.shipdesign.ShipPreparationInfo

License requirements: nx_ship_basic ("Ship Basic Design")
.

setExtendMethod(ToolPathEditorBuilder.ExtendMethodType) - Method in interface nxopen.cam.ToolPathEditorBuilder

License requirements: None.

setExtendMethod(TurnEngageRetractBuilder.ExtendMethods) - Method in interface nxopen.cam.TurnEngageRetractBuilder

License requirements: cam_base ("CAM BASE")
.

setExtendMethod(AOCSBuilder.Extend) - Method in interface nxopen.features.AOCSBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.

setExtendMethod(WeldPointExtendMethod) - Method in interface nxopen.weld.WeldPointBuilder

Sets the offset curve extend method.

setExtendMode(RoughFinishTurningBuilder.ExtendModeTypes) - Method in interface nxopen.cam.RoughFinishTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setExtendNewFace(boolean) - Method in interface nxopen.features.TrimExtendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setExtendOffset(boolean) - Method in interface nxopen.weld.JointmarkGuideBuilder

License requirements: ugweld ("UG WELD")
.

setExtendOption(boolean) - Method in interface nxopen.features.DividefaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setExtendProfile(boolean) - Method in interface nxopen.features.sheetmetal.BendBuilder

Sets the Extend Option
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setExtendProfile(boolean) - Method in interface nxopen.features.sheetmetal.JogBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setExtendStartFace(boolean) - Method in interface nxopen.features.shipdesign.ExcessMaterialBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setExtendSurface(boolean) - Method in interface nxopen.features.vehicledesign.GroundClearanceBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setExtendToBoundary(boolean) - Method in interface nxopen.cam.UpDownCutting

License requirements: cam_base ("CAM BASE")
.

setExtendToBoundary(boolean) - Method in interface nxopen.weld.WeldBeadBuilder

License requirements: ugweld ("UG WELD")
.

setExtendToFaceOption(AOCSBuilder.ExtendToFace) - Method in interface nxopen.features.AOCSBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.

setExtendToPart(boolean) - Method in interface nxopen.cam.MillCutParameters

License requirements: cam_base ("CAM BASE")
.

setExtendType(ExtensionBuilder.Extension) - Method in interface nxopen.features.ExtensionBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setExtendValues(double[]) - Method in interface nxopen.cam.DPMItpBuilder

Deprecated.

Deprecated in NX10.0.1. Use DmTrimExtend instead.

setExtendWalls(boolean) - Method in interface nxopen.cam.VolumeBased25DMillingOperationBuilder

License requirements: cam_base ("CAM BASE")
.

setExtension(double) - Method in interface nxopen.annotations.Centerline2dSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setExtension(double) - Method in interface nxopen.annotations.Centerline3dSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setExtension(double) - Method in interface nxopen.annotations.CenterMarkSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setExtension(double) - Method in interface nxopen.annotations.CircleCenterlineSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setExtension(double) - Method in interface nxopen.annotations.IntersectionSymbolBuilder

License requirements: drafting ("DRAFTING")
.

setExtension(double) - Method in interface nxopen.annotations.OffsetCenterPointBuilder

License requirements: drafting ("DRAFTING")
.

setExtension(double) - Method in interface nxopen.annotations.SymmetricalCenterlineSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setExtensionAttributes(String, String, int) - Method in interface nxopen.die.ThroatChildBuilder

Sets the extension attributes, note existance of attributes depends on usage in main feature.

setExtensionAttributes(String, String, int) - Method in interface nxopen.die.ThroatParentBuilder

Sets the extension attributes, note existance of attributes depends on usage in main feature.

setExtensionDirection(ExtensionDirection) - Method in interface nxopen.geometricutilities.CurveLengthData

License requirements: solid_modeling ("SOLIDS MODELING")
.

setExtensionDistance(String) - Method in interface nxopen.die.SteelInsertSectionBuilder

License requirements: ug_die_design ("Die Design")
.

setExtensionDistance(String) - Method in interface nxopen.die.SteelInsertSegmentChildBuilder

License requirements: ug_die_design ("Die Design")
.

setExtensionDistance(String) - Method in interface nxopen.die.SteelInsertSegmentParentBuilder

License requirements: ug_die_design ("Die Design")
.

setExtensionLength(String) - Method in interface nxopen.die.ThroatChildBuilder

License requirements: ug_die_design ("Die Design")
.

setExtensionLineDisplay(ExtensionLineDisplay) - Method in interface nxopen.annotations.DimensionPreferences

Sets the extension line display
License requirements: None.

setExtensionLineDisplay(ExtensionLineDisplay) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setExtensionMethod(TrimExtendBuilder.ExtensionMethods) - Method in interface nxopen.features.TrimExtendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setExtensionMethod(ExtensionMethod) - Method in interface nxopen.geometricutilities.CurveLengthData

License requirements: solid_modeling ("SOLIDS MODELING")
.

setExtensionMethod(FilletBuilder.EnumExtensionMethod) - Method in interface nxopen.weld.FilletBuilder

License requirements: ugweld ("UG WELD")
.

setExtensionOption(ModelTerminalsBuilder.ExtensionValueOption) - Method in interface nxopen.routing.ModelTerminalsBuilder

License requirements: routing_harness ("Routing Harness")
.

setExtensionSide(ExtensionSide) - Method in interface nxopen.geometricutilities.CurveLengthData

License requirements: solid_modeling ("SOLIDS MODELING")
.

setExtensionSolution(CoolingDefineChannelBuilder.ExtensionTypes) - Method in interface nxopen.tooling.CoolingDefineChannelBuilder

License requirements: ug_mold_design ("UG MOLD")
.

setExtensionType(SteelInsertSectionBuilder.ExtensionTypeOption) - Method in interface nxopen.die.SteelInsertSectionBuilder

Sets the extension type
License requirements: ug_die_design ("Die Design")
.

setExtensionType(SteelInsertSegmentChildBuilder.ExtensionTypeOption) - Method in interface nxopen.die.SteelInsertSegmentChildBuilder

Sets the extension type
License requirements: ug_die_design ("Die Design")
.

setExtensionType(SteelInsertSegmentParentBuilder.ExtensionTypeOption) - Method in interface nxopen.die.SteelInsertSegmentParentBuilder

Sets the extension type
License requirements: ug_die_design ("Die Design")
.

setExtensionType(EnlargeBuilder.ExtensionTypes) - Method in interface nxopen.features.EnlargeBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setExtensionVector(Direction) - Method in interface nxopen.mechanicalrouting.PathTransitionBuilder

License requirements: routing_base ("Routing Basic")
.

setExtent(Point3d, Point3d, Point3d, Point3d) - Method in interface nxopen.display.PlanarShipGridBuilder

Set corner points for the grid extent.

setExtentCurve(Curve) - Method in interface nxopen.features.GeodesicTrimBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setExtentType(CamInspectionOperationExtenttypes) - Method in interface nxopen.cam.InspectionConeFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setExtentType(CamInspectionOperationExtenttypes) - Method in interface nxopen.cam.InspectionCylinderFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setExtentType(CamInspectionOperationExtenttypes) - Method in interface nxopen.cam.InspectionLineFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setExtentType(CamInspectionOperationExtenttypes) - Method in interface nxopen.cam.InspectionParplnFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setExtentType(CamInspectionOperationExtenttypes) - Method in interface nxopen.cam.InspectionPlaneFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setExternalFrameAnchorName(String) - Method in interface nxopen.routing.PlatformCreatorBuilder

License requirements: routing_platform ("Routing Platform")
.

setExtMenuPropertyValue(String, String) - Method in interface nxopen.cae.PropertyTable

Sets the ext menu value of the property
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setExtraCrossDrive(boolean) - Method in interface nxopen.cam.CleanupSettings

License requirements: cam_base ("CAM BASE")
.

setExtractedEdgeFaceDisplay(SessionDrafting.EdgeFaceDisplayType) - Method in interface nxopen.preferences.SessionDrafting

Sets the extracted edge face display
License requirements: None.

setExtractedEdges(GeneralExtractedEdgesOption) - Method in interface nxopen.drawings.GeneralViewStyle

Sets the extracted edge, that provides an alternative way to display model geometry in a drawing view.

setExtractedEdges(boolean) - Method in interface nxopen.drawings.ViewCreationWizardBuilder

License requirements: drafting ("DRAFTING")
.

setExtractedEdges(GeneralExtractedEdgesOption) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder

License requirements: drafting ("DRAFTING")
.

setExtractedEdges(GeneralExtractedEdgesOption) - Method in interface nxopen.preferences.GeneralViewPreferences

Sets the extracted edge that provides an alternative way to display model geometry in a drawing view.

setExtractEdgeDistance(InspectionConstructedFeatureBuilder.ExtractEdgeDistanceType) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setExtractEndDistance(double) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setExtractFaceBuilder(ExtractFaceBuilder) - Method in interface nxopen.features.WaveLinkBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setExtractGussetCurves(boolean) - Method in interface nxopen.features.sheetmetal.UnbendBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setExtractMethod(StudioXformBuilderEx.ExtrationMethodType) - Method in interface nxopen.features.StudioXformBuilderEx

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setExtractStartDistance(double) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setExtractTolerance(double) - Method in interface nxopen.features.IFormBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setExtractTolerance(double) - Method in interface nxopen.features.StudioXformBuilderEx

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setExtrapolation(AfuData.ExtrapolationType) - Method in interface nxopen.cae.AfuData

Sets the extrapolation type
License requirements: nx_ftk ("NX Advanced Graphing")
.

setExtremeFacePointOverridesStationary(boolean) - Method in interface nxopen.features.DraftBodyBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setExtrudeDirection(Direction) - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder

License requirements: None.

setExtrudeDistance(double) - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder

License requirements: None.

setExtrudeDraftAngle(double) - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder

License requirements: None.

setExtrudeHeight(double) - Method in interface nxopen.weld.WeldFillBuilder

License requirements: ugweld ("UG WELD")
.

setExtrudeName(String) - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setExtrudeSolidBody(boolean) - Method in interface nxopen.drawings.ViewCopyTo3dBuilder

Deprecated.

Deprecated in NX8.0.0. This method is no longer relevant and calls to this can be safely removed.

setExtrusionLimit(Plane) - Method in interface nxopen.features.shipdesign.LongitudinalBulkheadBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setEyellipse(String) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setEyellipsePercentile(MirrorCertificationBuilder.EyellipsePercentileType) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setEyeMethod(MirrorCertificationBuilder.EyeMethodType) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setEyePoint(Point) - Method in interface nxopen.features.vehicledesign.HoodVisibilityBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setEyePoint(Point) - Method in interface nxopen.features.vehicledesign.ReflectionDataBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setEyePointMethod(MirrorCertificationBuilder.EyePointMethodType) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setEyePointOffsetType(CloseRangeVisibilityBuilder.EyePointOffsetTypes) - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setEyePointType(CloseRangeVisibilityBuilder.EyePointTypes) - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setEyeType(VisionPlaneBuilder.EnumEyeType) - Method in interface nxopen.features.vehicledesign.VisionPlaneBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setEyeType(WindshieldDatumBuilder.EnumEyeType) - Method in interface nxopen.features.vehicledesign.WindshieldDatumBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setF1(String) - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder

License requirements: drafting ("DRAFTING")
.

setF1(String) - Method in interface nxopen.annotations.SurfaceFinishBuilder

License requirements: None.

setF2(String) - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder

License requirements: drafting ("DRAFTING")
.

setF2(String) - Method in interface nxopen.annotations.SurfaceFinishBuilder

License requirements: None.

setFabricationNumbering(BillOfMaterialBuilder.FabricationNumberingType) - Method in interface nxopen.annotations.BillOfMaterialBuilder

License requirements: routing_base ("Routing Basic")
.

setFabricationNumberingFlag(RoutingPart.FabricationNumbering) - Method in interface nxopen.preferences.RoutingPart

Sets the fabrication numbering for the Routing bill of material.

setFace(ScCollector) - Method in interface nxopen.features.EmbossProjection

Sets the projection face
License requirements: solid_modeling ("SOLIDS MODELING")
.

setFaceAllFacesColor(NXColor) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setFaceAnalysis(boolean) - Method in interface nxopen.fields.DisplayPropertiesBuilder

License requirements: None.

setFaceAnalysis(boolean) - Method in interface nxopen.preferences.PartObject

Sets the face analysis flag for Solid and Sheets
License requirements: None.

setFaceAnalysis(Tag, boolean) - Method in interface nxopen.uf.UFObj

Refer to UF_OBJ_set_face_analysis for documentation.

setFaceAnalysisMode(boolean) - Method in interface nxopen.DisplayModification

Sets the face analysis mode flag.

setFaceAnalysisViewsType(SelPref.FaceAnalysisViews) - Method in interface nxopen.display.SelPref

License requirements: None.

setFaceAndOffset(Face, double, String) - Method in interface nxopen.features.DatumPlaneBuilder

Sets one face object and offset
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setFaceBlendDefineType(FaceBlendBuilder.DefiningType) - Method in interface nxopen.features.FaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setFaceBlendLawRadii(Tag, double[], int) - Method in interface nxopen.uf.UFModlFeatures

Refer to UF_MODL_set_face_blend_law_radii for documentation.

setFaceBlendLawRange1Radii(Tag, double[], int) - Method in interface nxopen.uf.UFModlFeatures

Refer to UF_MODL_set_face_blend_law_range1_radii for documentation.

setFaceBlendLawRange2Radii(Tag, double[], int) - Method in interface nxopen.uf.UFModlFeatures

Refer to UF_MODL_set_face_blend_law_range2_radii for documentation.

setFaceCenter() - Method in interface nxopen.tooling.StandardPartPositionBuilder

Sets the reference point to the selected face center.

setFaceChangeOption(FaceChangeOverflowBehavior.Option) - Method in interface nxopen.geometricutilities.FaceChangeOverflowBehavior

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setFaceCollector(ScCollector) - Method in interface nxopen.features.AOCSBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.

setFaceCollector(ScCollector) - Method in interface nxopen.features.sheetmetal.RebendBuilder

Sets the unbent faces to rebend
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setFaceCollector(ScCollector) - Method in interface nxopen.features.sheetmetal.UnbendBuilder

Sets the bend faces
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setFaceCollector(ScCollector) - Method in interface nxopen.geometricutilities.FaceSetOffset

License requirements: solid_modeling ("SOLIDS MODELING")
.

setFaceColor(NXColor) - Method in interface nxopen.tooling.FaceColorManagementBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setFaceColor(int) - Method in interface nxopen.tooling.ManufacturingGeometryBuilder

Sets the face color.

setFaceColor(NXColor) - Method in interface nxopen.tooling.MWDefineRegionsBuilder

License requirements: None.

setFaceConstraintCollectors(int[], ScCollector[], MeshSurfaceBuilder.ConstraintType[]) - Method in interface nxopen.features.MeshSurfaceBuilder

Set faces constraints collectors for through curves and curves mesh types surfaces.

setFaceConstraintDirection(MeshSurfaceBuilder.ConstraintDirection) - Method in interface nxopen.features.MeshSurfaceBuilder

Sets
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

setFaceConstraintTypes(MeshSurfaceBuilder.ConstraintType[]) - Method in interface nxopen.features.MeshSurfaceBuilder

Set end constraints types.

setFaceCrossoverFacesColor(NXColor) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setFaceCurveDirectionAdjustment(boolean) - Method in interface nxopen.assemblies.RelinkerBuilder

License requirements: wave ("WAVE FUNCTIONALITY")
.

setFaceDensitySize(int) - Method in interface nxopen.cae.MeshControlDisplayOptionsBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setFaceDirection(boolean) - Method in interface nxopen.features.PromotionBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setFaceDirectionOption(BridgeCurveConnectivity.FaceDirectionOptions) - Method in interface nxopen.geometricutilities.BridgeCurveConnectivity

License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_1 ("basic freeform modeling")
.

setFaceDisplay(ViewWorkflowBuilder.Display) - Method in interface nxopen.drawings.ViewWorkflowBuilder

License requirements: drafting ("DRAFTING")
.

setFaceDraftAngleLimit(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setFaceEdgeBlendPreference(DeleteFaceBuilder.FaceEdgeBlendPreferenceOptions) - Method in interface nxopen.features.DeleteFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
.

setFaceFillGapDistance(double) - Method in interface nxopen.weld.FilletBuilder

License requirements: ugweld ("UG WELD")
.

setFaceGapDistance(double) - Method in interface nxopen.weld.AutoPointBuilder

License requirements: ugweld ("UG WELD")
.

setFaceHighlightSelectedFaces(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setFaceIndexToEdit(int) - Method in interface nxopen.die.QuickBinderBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setFaceIntegralOption(ResultProbeBuilder.FaceIntegral) - Method in interface nxopen.cae.ResultProbeBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setFaceIntegralOptionValue(PostGraphBuilder.FaceIntegralOption) - Method in interface nxopen.cae.PostGraphBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setFaceInterferenceType(SimpleInterference.FaceInterferenceMethod) - Method in interface nxopen.geometricanalysis.SimpleInterference

License requirements: None.

setFaceNegativeFacesColor1(NXColor) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setFaceNegativeFacesColor2(NXColor) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setFaceNonSelectedFacesTranslucency(int) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setFaceNormal(Direction) - Method in interface nxopen.cae.FluidDomainBuilder

License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")
.

setFaceOffsetVector(boolean) - Method in interface nxopen.features.shipdesign.ProfileBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setFaceOption(ExtractFaceBuilder.FaceOptionType) - Method in interface nxopen.features.ExtractFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setFacePointsBy(PointSetBuilder.FacePointsType) - Method in interface nxopen.features.PointSetBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setFacePositiveFacesColor1(NXColor) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setFacePositiveFacesColor2(NXColor) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setFaceReflectivityScale(int) - Method in interface nxopen.geometricanalysis.ReflectionAnalysisBuilder

License requirements: None.

setFaceReverse(boolean) - Method in interface nxopen.features.vehicledesign.CloseRangeCameraListItemBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setFaceReverseDirection(boolean) - Method in interface nxopen.features.ExtractFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setFaceReverseDirection(boolean) - Method in interface nxopen.features.shipdesign.StiffenerBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setFaceReverseDirection(boolean) - Method in interface nxopen.tooling.ReplaceSolidBuilder

License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setFaceRules(int) - Method in interface nxopen.blockstyler.FaceCollector

License requirements: None.

setFaces(CAEFace[]) - Method in interface nxopen.cae.AutoPairs

Set the list of CAEFace
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Created in NX5.0.0

setFaces(DisplayableObject[]) - Method in interface nxopen.cam.FeatureTeaching

Sets the selected faces
License requirements: fbm_author ("FBM Author")
.

setFaces(NXObject[]) - Method in interface nxopen.cam.MultiBladeBaseGeometry

Set the selection faces
License requirements: cam_base ("CAM BASE")
.

setFaces(Face[]) - Method in interface nxopen.features.sheetmetal.BreakCornerBuilder

The array of input faces that implicitly include all connected sharp thickness edges as input for the break corner.

setFaces(NXObject[]) - Method in interface nxopen.mechatronics.TransportSurfaceBuilder

Sets the faces.

setFaces(Face[]) - Method in interface nxopen.motion.PointOnSurfaceBuilder

Set the faces
License requirements: mechanisms ("MECHANISMS")
.

setFaces(Face[]) - Method in interface nxopen.tooling.BendInsertDesignBuilder

Sets the face occurrences into builder attribute.

setFaces(Face[]) - Method in interface nxopen.tooling.ReliefDesignBuilder

Sets the face occurrences into builder attribute.

setFaces(Tag, int, Tag[]) - Method in interface nxopen.uf.UFGdt

Refer to UF_GDT_set_faces for documentation.

setFaceSearchOption(MMCCreateBuilder.FaceSearchType) - Method in interface nxopen.cae.MMCCreateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setFaceSelectAllFaces(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setFaceSelectCrossoverFaces(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setFaceSelectedFacesTranslucency(int) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setFaceSelectNegativeFaces1(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setFaceSelectNegativeFaces2(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setFaceSelectors(Face[]) - Method in interface nxopen.geometricutilities.RegionTracker

The input target or tool faces used to identify the region
License requirements: solid_modeling ("SOLIDS MODELING")
.

setFaceSelectPositiveFaces1(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setFaceSelectPositiveFaces2(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setFaceSelectUndercutAreas(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setFaceSelectUndercutEdges(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setFaceSelectVerticalFaces(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setFaceSet(WeldFacesetIndex, DisplayableObject[]) - Method in interface nxopen.weld.WeldPointBuilder

Sets the user selected faces for the indicated face set
License requirements: ugweld ("UG WELD")
.

setFaceStock(double) - Method in interface nxopen.cam.BoundaryTurnBlank

License requirements: cam_base ("CAM BASE")
.

setFacesToDivide(ScCollector) - Method in interface nxopen.features.DividefaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setFacetBeingPainted(FacetedBody) - Method in interface nxopen.facet.PaintBrushBuilder

Deprecated.

Deprecated in NX11.0.0. Use PaintBrushBuilder.setBodyBeingPainted(nxopen.DisplayableObject) instead.

setFacetBodies(boolean) - Method in interface nxopen.NXTo2dCreator

License requirements: None.

setFacetBodyType(STLImportBuilder.FacetBodyTypes) - Method in interface nxopen.facet.STLImportBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setFacetCacheMemoryLevel(DisplayManager.FacetCacheMemoryLevelType) - Method in interface nxopen.DisplayManager

License requirements: None.

setFacetDensity(double) - Method in interface nxopen.die.AddendumSectionBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setFacetedRepresentation(boolean) - Method in interface nxopen.drawings.BaseViewStyle

Deprecated.

Deprecated in NX8.5.1. Use Drawings.GeneralViewStyle#setViewRepresentation instead.

setFacetedRepresentation(boolean) - Method in interface nxopen.drawings.ViewStyleBaseBuilder

Deprecated.

Deprecated in NX8.5.1. Use Drawings.ViewStyleGeneralBuilder#setViewRepresentation instead.

setFacetedRepresentation(boolean) - Method in interface nxopen.preferences.BaseViewPreferences

Deprecated.

Deprecated in NX8.5.1. Use Preferences.GeneralViewPreferences#setViewRepresentation instead.

setFaceThicknessList(ObjectList) - Method in interface nxopen.features.ShellBuilder

Deprecated.

Deprecated in NX5.0.0. Use #setFaceThicknesses instead.

setFaceTolerance(double) - Method in interface nxopen.drawings.ViewStyleShadingBuilder

License requirements: drafting ("DRAFTING")
.

setFaceTolerance(double) - Method in interface nxopen.geometricutilities.DisplayResolutionBuilder

License requirements: None.

setFaceToMove(Face) - Method in interface nxopen.features.LinearDimensionBuilder

The important face that is being moved through the ADM Linear Dimension Feature.

setFacetQualityOptions(DieEngDefineProductOrientationBuilder.FacetQualityOption) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setFaceTranslucency(int) - Method in interface nxopen.tooling.FaceColorManagementBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setFaceTrimMethod(FittingOverstockBuilder.TrimMethod) - Method in interface nxopen.routing.FittingOverstockBuilder

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setFacetsQuality(double) - Method in interface nxopen.ModelingViewHighQualityImage

Sets the quality of the facets of the High Quality Image.

setFacetTolerance(double) - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setFacetTolerance(double) - Method in interface nxopen.sim.SinumerikCaFacetBuilder

License requirements: nx_sinumerik_ca ("Sinumerik Collision Avoidance")
.

setFaceUndercutAreasColor(NXColor) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setFaceUndercutEdgesColor(NXColor) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setFaceVerticalFacesColor(NXColor) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setFactorOfSafety(double) - Method in interface nxopen.cae.DurabilityEventStrengthSettingsBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setFactoryDefaultTemplate() - Method in interface nxopen.cae.Post

Use factory defaults rather than a template for the default postview settings to be used in all subsequent PostviewCreate calls
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setFactoryType(CreateFactoryElementBuilder.TypeAPI) - Method in interface nxopen.linedesigner.CreateFactoryElementBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setFailedElementsColor(NXColor) - Method in interface nxopen.cae.modelcheck.ElementQualityCheckBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setFailGroupName(String) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setFailureIndex(boolean) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setFailureIndex(boolean) - Method in interface nxopen.cae.DurabilityResultsReportBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setFailureIndex(boolean) - Method in interface nxopen.cae.LaminateGraphicalReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setFailureIndex(boolean) - Method in interface nxopen.cae.LaminateQuickReportBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setFailureIndex(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setFailureIndexRule(LaminateGraphicalReportBuilder.EnvelopeRule) - Method in interface nxopen.cae.LaminateGraphicalReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setFailureIndexRule(LaminateQuickReportBuilder.EnvelopeRule) - Method in interface nxopen.cae.LaminateQuickReportBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setFailureIndexRule(LaminateSpreadsheetReportBuilder.EnvelopeRule) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setFailureMode(LaminateGraphicalReportBuilder.FailureModeType) - Method in interface nxopen.cae.LaminateGraphicalReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setFailureMode(LaminateSpreadsheetReportBuilder.FailureModeType) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setFailureShowIsocline(boolean) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setFailureValue(double) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setFallOffFactor(double) - Method in interface nxopen.features.subdivision.TransformCageData

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setFallOffMethod(TransformCageData.FallOffMethodType) - Method in interface nxopen.features.subdivision.TransformCageData

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setFallOffScale(double) - Method in interface nxopen.features.StudioXformBuilder

Deprecated.

Deprecated in NX8.5.0. Use StudioXformBuilderEx instead.

setFallOffScale(double) - Method in interface nxopen.features.StudioXformBuilderEx

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setFalseBody(boolean) - Method in interface nxopen.tooling.BendInsertDesignBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setFamilyDefaultDirectory(String) - Method in interface nxopen.SaveOptions

Sets the option that specifies the directory in which you want to file part family members.

setFamilySaveDir(Tag, String) - Method in interface nxopen.uf.UFPart

Refer to UF_PART_set_family_save_dir for documentation.

setFamilyTreatment(UFClone.FamilyTreatment) - Method in interface nxopen.uf.UFClone

Refer to UF_CLONE_set_family_treatment for documentation.

setFamInstSaveDir(String) - Method in interface nxopen.uf.UFPart

Refer to UF_PART_set_fam_inst_save_dir for documentation.

setFastenerExtentLength(double) - Method in interface nxopen.tooling.FastenerAssy

Sets the extent length for the hole in the fastener assembly
License requirements: None.

setFastenerMode(FastenerAssy.ModeMethod) - Method in interface nxopen.tooling.FastenerAssy

Sets the fastener mode
License requirements: None.

setFastenerSelectionType(FastenerAssy.SelectionTypeMethod) - Method in interface nxopen.tooling.FastenerAssy

Sets the selection type for the hole in the fastener assembly
License requirements: None.

setFastPlacementUtilityBuilder(FastPlacementUtilityBuilder) - Method in interface nxopen.linedesigner.GlobalSelectionBuilder

Set the fast placement utility builder
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setFastRmsMethod(boolean) - Method in interface nxopen.cae.responsesimulation.RSEventAttributes

License requirements: nx_response_anlys ("NX Response Analysis")
.

setFatigue(DurabilityFatigue) - Method in interface nxopen.cae.DurabilityDamageEvaluationBuilder

The fatigue settings.

setFatigue(DurabilityFatigue) - Method in interface nxopen.cae.DurabilityEventBuilder

The event fatigue settings stored inside the event.

setFatigueHistoryDataType(DurabilityEvaluateFatigueHistoryBuilder.FatigueHistoryDataTypeEnum) - Method in interface nxopen.cae.DurabilityEvaluateFatigueHistoryBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setFatigueLifeCriterion(DurabilityEventFatigueSettingsBuilder.FatigueLifeCriterionEnum) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setFatigueSafetyFactor(boolean) - Method in interface nxopen.cae.DurabilityResultsReportBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setFatigueSafetyFactorKeyin(double) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setFatigueSafetyFactorMethod(DurabilityEventFatigueSettingsBuilder.FatigueSafetyFactorMethodEnum) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setFatigueSafetyFactorOutput(DurabilityEventFatigueSettingsBuilder.FatigueSafetyFactorOutputEnum) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setFatigueSafetyFactorToggle(boolean) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setFavoriteIndex(int) - Method in interface nxopen.ColorDefinition

License requirements: None.

setFcfAdditionalTextUnderline(SymbolStyleBuilder.FcfTextUnderlineOption) - Method in interface nxopen.annotations.SymbolStyleBuilder

Sets the option to underline the additional FCF text
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setFcfCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use TrackDrawingChangesReportFilterBuilder.setReportFilterStatus(nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter, boolean) instead.

setFcfDrf(Tag, Tag) - Method in interface nxopen.uf.UFGdt

Refer to UF_GDT_set_fcf_drf for documentation.

setFcfFrameData(FcfFrameData) - Method in interface nxopen.annotations.IFcf

Sets the single FCF frames data.

setFcfFrameData(FcfFrameData[]) - Method in interface nxopen.annotations.IFcf

Sets the multiple FCF frames data.

setFcfLeaderTerminatorCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use TrackDrawingChangesReportFilterBuilder.setReportFilterStatus(nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter, boolean) instead.

setFcfOriginCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use TrackDrawingChangesReportFilterBuilder.setReportFilterStatus(nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter, boolean) instead.

setFcfRetainedStatusCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use TrackDrawingChangesReportFilterBuilder.setReportFilterStatus(nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter, boolean) instead.

setFcfTextCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use TrackDrawingChangesReportFilterBuilder.setReportFilterStatus(nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter, boolean) instead.

setFeatDisplayDesPoints(boolean) - Method in interface nxopen.cam.InspectionMeasDataBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setFeatDisplayMeaPoints(boolean) - Method in interface nxopen.cam.InspectionMeasDataBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setFeatDisplayReconstruct(boolean) - Method in interface nxopen.cam.InspectionMeasDataBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setFeatHighlightNominal(boolean) - Method in interface nxopen.cam.InspectionMeasDataBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setFeatTolerance(Tag, double, boolean) - Method in interface nxopen.uf.UFModeling

Refer to UF_MODL_set_feat_tolerance for documentation.

setFeature(CAMFeature) - Method in interface nxopen.cam.MapFeatureTeaching

Sets the selected feature
License requirements: fbm_author ("FBM Author")
.

setFeature(CAMFeature) - Method in interface nxopen.cam.OperationTeaching

Sets the selected feature
License requirements: fbm_author ("FBM Author")
.

setFeature(int) - Method in interface nxopen.features.shipdesign.QualifySketchBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setFeature(Feature) - Method in interface nxopen.features.shipdesign.ShipPreparationInfo

License requirements: nx_ship_basic ("Ship Basic Design")
.

setFeatureData(CustomFeatureData) - Method in interface nxopen.features.CustomFeatureBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setFeatureDetail(boolean) - Method in interface nxopen.cam.InspectionAnalyzeOutputBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setFeatureFilter(InspectionPatternFeatureBuilder.FeatureFilterTypes) - Method in interface nxopen.cam.InspectionPatternFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setFeatureGroupCondition(String, String) - Method in interface nxopen.cam.OperationSetTeaching

Sets the feature group conditions
License requirements: fbm_author ("FBM Author")
.

setFeatureGrouping(FeatureProcessBuilder.FeatureGroupingType) - Method in interface nxopen.cam.FeatureProcessBuilder

License requirements: ug_holemaking ("UG Holemaking")
.

setFeatureGroupPriority(String, double) - Method in interface nxopen.cam.OperationSetTeaching

Sets the feature group priority
License requirements: fbm_author ("FBM Author")
.

setFeatureGroups(FeatureGeometry[]) - Method in interface nxopen.cam.OperationSetTeaching

Sets the selected feature groups
License requirements: fbm_author ("FBM Author")
.

setFeatureGroupType(FeatureGroup.Type) - Method in interface nxopen.features.FeatureGroup

Sets the feaure group type.

setFeatureId(String) - Method in interface nxopen.annotations.FeatureIdBusinessModifierBuilder

License requirements: geometric_tol ("GDT")
.

setFeatureMethods(InspectionGroup[]) - Method in interface nxopen.cam.InspectionCreatePathsBuilder

Sets the selected features method
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setFeatureMode(ProfileTransitionBuilder.FeatureModeType) - Method in interface nxopen.features.shipdesign.ProfileTransitionBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setFeatureName(String) - Method in interface nxopen.cam.IpwContainmentCurvesBuilder

License requirements: cam_base ("CAM BASE")
.

setFeatureName(String) - Method in interface nxopen.FeatureGeneralPropertiesBuilder

License requirements: None.

setFeatureName(String) - Method in interface nxopen.features.shipdesign.ManufacturingPreparationBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setFeatureName(String) - Method in interface nxopen.features.shipdesign.SteelDistributionBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setFeatureName(Tag, String) - Method in interface nxopen.uf.UFFbmGeom

Refer to UF_FBM_GEOM_set_feature_name for documentation.

setFeatureName(UFVariant, String) - Method in interface nxopen.uf.UFMfm

Refer to UF_MFM_set_feature_name for documentation.

setFeatureNameSuffix(String) - Method in interface nxopen.features.shipdesign.TransFrameBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setFeatureObject(NXObject) - Method in interface nxopen.FeatureGeneralPropertiesBuilder

License requirements: None.

setFeatureOffsetDistance(double) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setFeatureOpName(String) - Method in interface nxopen.cam.InspectionPathBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setFeatureOption(ExtractFaceBuilder.FeatureOptionType) - Method in interface nxopen.features.ExtractFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setFeatureOption(MirrorBodyBuilder.FeatureOptionType) - Method in interface nxopen.features.MirrorBodyBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setFeatureSaveMethod(StudioXformBuilder.FeatureType) - Method in interface nxopen.features.StudioXformBuilder

Deprecated.

Deprecated in NX8.5.0. Use StudioXformBuilderEx instead.

setFeatureSaveMethod(StudioXformBuilderEx.FeatureType) - Method in interface nxopen.features.StudioXformBuilderEx

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setFeatureSpine(Section) - Method in interface nxopen.geometricutilities.AlongSpineBuilder

Set the spine sent by the owning feaure dynamically into builder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setFeaturesToGroupType(GroupFeatures.FeaturesToGroupTypes) - Method in interface nxopen.cam.GroupFeatures

License requirements: cam_base ("CAM BASE")
.

setFeatureSummary(boolean) - Method in interface nxopen.cam.InspectionAnalyzeOutputBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setFeatureSuppression(double) - Method in interface nxopen.ListCreator

License requirements: None.

setFeatureToEdit(SubdivisionBody) - Method in interface nxopen.SubdivisionTaskEnvironment

Sets the feature to be edited.

setFeatureType(String) - Method in interface nxopen.cam.MachiningFeature

License requirements: cam_base ("CAM BASE")
.

setFeatureType(SurfaceRegions.FeatureTypes) - Method in interface nxopen.cam.SurfaceRegions

License requirements: cam_base ("CAM BASE")
.

setFeatureType(MeshParameterData.FeatureType) - Method in interface nxopen.features.MeshSurfaceBuilder

Sets
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

setFeatureTypeEnum(InspectionConstructedFeatureBuilder.ConstFeatType) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setFeatureTypes(String[]) - Method in interface nxopen.cam.FeatureRecognitionBuilder

Sets the feature types used by the recognizer
License requirements: None.

setFeatureTypes(String[]) - Method in interface nxopen.cam.GroupFeatures

Set the feature types to filter
License requirements: cam_base ("CAM BASE")
.

setFeed(BoundaryTurnVariableStockSet.FeedType) - Method in interface nxopen.cam.BoundaryTurnVariableStockSet

License requirements: cam_base ("CAM BASE")
.

setFeed(UFVariant, double, UFSim.UnitType, double) - Method in interface nxopen.uf.UFSim

Refer to UF_SIM_set_feed for documentation.

setFeedbackPoint(Point) - Method in interface nxopen.mechatronics.AngularLimitJointBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setFeedbackPoint(Point) - Method in interface nxopen.mechatronics.AngularSpringJointBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setFeedbackPoint(Point) - Method in interface nxopen.mechatronics.FixedJointBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setFeedbackPoint(Point) - Method in interface nxopen.mechatronics.SlidingJointBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setFeedCutBuilder(InheritableFeedBuilder) - Method in interface nxopen.cam.DriveChainItemBuilder

License requirements: cam_base ("CAM BASE")
.

setFeedDisplayFlag(boolean) - Method in interface nxopen.cam.DisplayPaint

License requirements: cam_base ("CAM BASE")
.

setFeedDisplayFlag(boolean) - Method in interface nxopen.cam.OperationDisplayOptionsBuilder

License requirements: cam_base ("CAM BASE")
.

setFeedIn(TurnRoughFinishTestCut.FeedInTypes) - Method in interface nxopen.cam.TurnRoughFinishTestCut

License requirements: cam_base ("CAM BASE")
.

setFeedInAngle(double) - Method in interface nxopen.cam.TurnRoughFinishTestCut

License requirements: cam_base ("CAM BASE")
.

setFeedInLength(double) - Method in interface nxopen.cam.TurnRoughFinishTestCut

License requirements: cam_base ("CAM BASE")
.

setFeedOnShortMoves(boolean) - Method in interface nxopen.cam.MaxCutTraverse

License requirements: cam_base ("CAM BASE")
.

setFeedOut(TurnRoughFinishTestCut.FeedOutTypes) - Method in interface nxopen.cam.TurnRoughFinishTestCut

License requirements: cam_base ("CAM BASE")
.

setFeedOutAngle(double) - Method in interface nxopen.cam.TurnRoughFinishTestCut

License requirements: cam_base ("CAM BASE")
.

setFeedOutLength(double) - Method in interface nxopen.cam.TurnRoughFinishTestCut

License requirements: cam_base ("CAM BASE")
.

setFeedRate(String, double, CAMObject.FeedRateUnit) - Method in interface nxopen.cam.CAMObject

Set feed rate value and unit to the parameter index for the object.

setFeedRate(double) - Method in interface nxopen.cam.MoveBuilder

License requirements: None.

setFeedrate(double, CamPathFeedUnitType) - Method in interface nxopen.cam.PathLinearMotion

Set feed rate information.

setFeedRateColor(String, int) - Method in interface nxopen.cam.CAMObject

Set feed rate display color to the parameter index for the object.

setFeedrateFlag(boolean) - Method in interface nxopen.cam.DriveChainItemBuilder

License requirements: cam_base ("CAM BASE")
.

setFeedRateRange(FeedsOptimizationData.FeedRateRangeType) - Method in interface nxopen.cam.FeedsOptimizationData

License requirements: cam_base ("CAM BASE")
.

setFeedType(MoveBuilder.Feed) - Method in interface nxopen.cam.MoveBuilder

License requirements: None.

setFeedUnit(BoundaryMillingMemberSet.FeedUnitTypes) - Method in interface nxopen.cam.BoundaryMillingMemberSet

License requirements: cam_base ("CAM BASE")
.

setFeedUnit(BoundaryMillingMemberSet.FeedUnitTypes) - Method in interface nxopen.cam.BoundaryMillingSet

License requirements: cam_base ("CAM BASE")
.

setFeedUnit(BoundaryTurnSet.FeedUnitTypes) - Method in interface nxopen.cam.BoundaryTurnMemberCorner

License requirements: cam_base ("CAM BASE")
.

setFeedUnit(BoundaryTurnSet.FeedUnitTypes) - Method in interface nxopen.cam.BoundaryTurnMemberFeed

License requirements: cam_base ("CAM BASE")
.

setFeedUnit(BoundaryTurnSet.FeedUnitTypes) - Method in interface nxopen.cam.BoundaryTurnSet

License requirements: cam_base ("CAM BASE")
.

setFeedUnit(BoundaryTurnSet.FeedUnitTypes) - Method in interface nxopen.cam.BoundaryTurnVariableStockSet

License requirements: cam_base ("CAM BASE")
.

setFeedUnit(FeedRateUnit) - Method in interface nxopen.cam.GeometrySet

License requirements: cam_base ("CAM BASE")
.

setFeedUnit(FeedRateUnit) - Method in interface nxopen.cam.MoveBuilder

License requirements: None.

setFeedUnit(FeedRateUnit) - Method in interface nxopen.cam.SurfaceDriveGeometrySet

License requirements: cam_base ("CAM BASE")
.

setFeedValue(double) - Method in interface nxopen.cam.BoundaryMillingMemberSet

License requirements: cam_base ("CAM BASE")
.

setFeedValue(double) - Method in interface nxopen.cam.BoundaryMillingSet

License requirements: cam_base ("CAM BASE")
.

setFeedValue(double) - Method in interface nxopen.cam.BoundaryTurnMemberCorner

License requirements: cam_base ("CAM BASE")
.

setFeedValue(double) - Method in interface nxopen.cam.BoundaryTurnMemberFeed

License requirements: cam_base ("CAM BASE")
.

setFeedValue(double) - Method in interface nxopen.cam.BoundaryTurnSet

License requirements: cam_base ("CAM BASE")
.

setFeedValue(double) - Method in interface nxopen.cam.BoundaryTurnVariableStockSet

License requirements: cam_base ("CAM BASE")
.

setFeedValue(double) - Method in interface nxopen.cam.GeometrySet

License requirements: cam_base ("CAM BASE")
.

setFeedValue(double) - Method in interface nxopen.cam.SurfaceDriveGeometrySet

License requirements: cam_base ("CAM BASE")
.

setFeetInchFractionForDimensionGreaterThan(double) - Method in interface nxopen.drafting.AutomationPreferencesBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setFemaleDepthType(DrawBeadBuilder.FemaleDepthTypes) - Method in interface nxopen.die.DrawBeadBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setFemaleWidthType(DrawBeadBuilder.FemaleWidthTypes) - Method in interface nxopen.die.DrawBeadBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setFemAsWork() - Method in interface nxopen.cae.FemPart

Sets the fem as work, if associated cad is the current work.

setFemGeometrySaveOption(boolean) - Method in interface nxopen.cae.responsesimulation.RSEventOutputSetting

License requirements: nx_response_anlys ("NX Response Analysis")
.

setFemValidInPost(boolean) - Method in interface nxopen.cae.SimSolution

Specify whether NX Post should group entities based on node and element groups and meshes in the pre-processing model
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setFH1Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactFrontHeaderDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setFH1LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactFrontHeaderDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setFH1Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactFrontHeaderDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setFH1RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactFrontHeaderDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setFH2Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactFrontHeaderDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setFH2LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactFrontHeaderDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setFH2Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactFrontHeaderDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setFH2RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactFrontHeaderDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setFiberDistance(double) - Method in interface nxopen.cae.LaminateLayupOffsetBuilder

Deprecated.

Deprecated in NX10.0.0. Use LaminateLayupOffsetBuilder.refPlanePosition() instead.

setField(FieldWrapper) - Method in interface nxopen.cae.NodeTranslateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setField(Field) - Method in interface nxopen.fields.ComplexScalarFieldWrapper

Sets the implementation of the wrapper to the specified field
License requirements: None.

setField(Field) - Method in interface nxopen.fields.FieldWrapper

Sets the implementation of the wrapper to the specified field
License requirements: None.

setField(Field, double) - Method in interface nxopen.fields.ScalarFieldWrapper

Sets the implementation of the wrapper to the specified field
License requirements: None.

setField(Field, double[]) - Method in interface nxopen.fields.VectorFieldWrapper

Sets the implementation of the wrapper to the specified field
License requirements: None.

setFieldExpressionString(String, boolean) - Method in interface nxopen.fields.FieldExpression

Sets the new expression string to the expression field
License requirements: None.

setFieldName(String) - Method in interface nxopen.cae.ResultsCombinationBuilder

Set field Name to be created
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setFieldName(String) - Method in interface nxopen.cae.ResultsEnvelopeBuilder

Set field Name to be created
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setFieldName(String) - Method in interface nxopen.cae.ResultsReductionBuilder

Set field Name to be created
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setFieldOfViewAngle(double) - Method in interface nxopen.display.CameraBuilder

License requirements: None.

setFieldOfViewMeasured(CameraBuilder.FovMeasured) - Method in interface nxopen.display.CameraBuilder

License requirements: None.

setFields(Field[]) - Method in interface nxopen.cae.ImportSimulationBuilder

Set fields to import
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setFieldWeld(LineWeldBuilder.FieldWeldType) - Method in interface nxopen.annotations.LineWeldBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setFieldWeld(boolean) - Method in interface nxopen.annotations.LineWeldData

Sets the flag indicating whether the weld is done at the field site
License requirements: None.

setFieldWeld(boolean) - Method in interface nxopen.weld.FilletBuilder

License requirements: ugweld ("UG WELD")
.

setFieldWeld(boolean) - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. Use WeldGrooveBuilder.characteristics() instead.

setFieldWeld(boolean) - Method in interface nxopen.weld.PlugSlotBuilder

License requirements: None.

setFieldWrapperPropertyValue(String, FieldWrapper) - Method in interface nxopen.BasePropertyTable

Sets the field wrapper FieldWrapper
License requirements: None.

setFile(String, String) - Method in interface nxopen.blockstyler.PropertyList

Sets the value for the given property name.

setFile(String) - Method in interface nxopen.cae.LayoutStateApplicator

Sets the exported layout state that will be applied.

setFile(String) - Method in interface nxopen.facet.STLImportBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_1 ("basic freeform modeling")
.

setFile(String) - Method in interface nxopen.gateway.ImageCaptureBuilder

License requirements: drafting ("DRAFTING")
.

setFile(String, String) - Method in interface nxopen.PropertyContainer

Sets the value for the given property name.

setFileBrowser(String) - Method in interface nxopen.display.IrayPlusSimpleMaterialEditorBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setFileBrowser(String) - Method in interface nxopen.features.MapleBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setFileBrowser(String) - Method in interface nxopen.features.shipdesign.UpdateShipLibraryBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setFileExportStatus(boolean) - Method in interface nxopen.uf.UFUgmgr

Refer to UF_UGMGR_set_file_export_status for documentation.

setFileFormat(SaveImageFileBrowserBuilder.FileFormats) - Method in interface nxopen.display.SaveImageFileBrowserBuilder

License requirements: None.

setFileFormat(STLImporter.FileFormatType) - Method in interface nxopen.STLImporter

Sets the file format.

setFileName(String) - Method in interface nxopen.cae.AfuData

Sets the name of AFU file
License requirements: nx_ftk ("NX Advanced Graphing")
.

setFilename(String) - Method in interface nxopen.cae.FlatPatternsBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setFileName(String) - Method in interface nxopen.cae.LaminateImportedLayupBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setFilename(String) - Method in interface nxopen.cae.LaminateImportZonesBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setFilename(String) - Method in interface nxopen.display.CgfxAttributeValueFileBuilder

Deprecated.

Deprecated in NX10.0.0. No alternative provided for this class.

setFileName(String) - Method in interface nxopen.features.subdivision.ExportSubdivisionGeometryBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setFileName(String) - Method in interface nxopen.features.subdivision.ImportSubdivisionGeometryBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setFileName(String) - Method in interface nxopen.fields.ExportData

Set file name
License requirements: None.

setFileName(String) - Method in interface nxopen.fields.ImportData

Set file name
License requirements: None.

setFileName(String) - Method in interface nxopen.geometricanalysis.ReflectionAnalysisBuilder

License requirements: None.

setFileName(String) - Method in interface nxopen.geometricutilities.PointsFromFileBuilder

License requirements: None.

setFileName(String) - Method in interface nxopen.Importer

Sets the name of the file containing the data to import.

setFileName(String) - Method in interface nxopen.linedesigner.ExportPlantToDWGBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setFileName(String) - Method in interface nxopen.linedesigner.ExportToDWGBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setFileName(String) - Method in interface nxopen.openxml.ImageDocumentData

Sets the file name of the image data
License requirements: None.

setFilename(String) - Method in interface nxopen.PrintPDFBuilder

License requirements: None.

setFilename(String) - Method in interface nxopen.routing.WatertightFittingsBuilder

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setFileName(String) - Method in interface nxopen.sim.ArchiveImportBuilder

License requirements: None.

setFileName(String) - Method in interface nxopen.sim.SinumerikCaExportBuilder

License requirements: nx_sinumerik_ca ("Sinumerik Collision Avoidance")
.

setFileName(String) - Method in interface nxopen.validate.PartNode

License requirements: None.

setFilename(String) - Method in interface nxopen.visualreporting.VisualReport

License requirements: nx_visual_reporting ("Visual Reporting")
.

setFilenameOfVisualReport(String) - Method in interface nxopen.visualreporting.VisualReportBuilder

License requirements: None.

setFilenames(String[]) - Method in interface nxopen.CGMBuilder

Sets all the CGM filenames.

setFilenames(String[]) - Method in interface nxopen.PlotBuilder

Sets all the temporary CGM filenames to be plotted.

setFileOpenFlag(boolean) - Method in interface nxopen.AcisImporter

License requirements: None.

setFileOpenFlag(boolean) - Method in interface nxopen.Catiav4Importer

License requirements: None.

setFileOpenFlag(boolean) - Method in interface nxopen.Catiav5Importer

License requirements: None.

setFileOpenFlag(boolean) - Method in interface nxopen.DxfdwgImporter

License requirements: None.

setFileOpenFlag(boolean) - Method in interface nxopen.IgesImporter

License requirements: None.

setFileOpenFlag(boolean) - Method in interface nxopen.Step203Importer

License requirements: None.

setFileOpenFlag(boolean) - Method in interface nxopen.Step214Importer

License requirements: None.

setFilePicker(String) - Method in interface nxopen.mechatronics.PreferencesBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setFileSaveFlag(boolean) - Method in interface nxopen.AcisExporter

License requirements: None.

setFileSaveFlag(boolean) - Method in interface nxopen.Catiav4Creator

License requirements: None.

setFileSaveFlag(boolean) - Method in interface nxopen.Catiav5Creator

License requirements: None.

setFileSaveFlag(boolean) - Method in interface nxopen.DxfdwgCreator

License requirements: None.

setFileSaveFlag(boolean) - Method in interface nxopen.IgesCreator

License requirements: None.

setFileSaveFlag(boolean) - Method in interface nxopen.Step203Creator

Deprecated.

Deprecated in NX11.0.0. Use StepCreator instead.

setFileSaveFlag(boolean) - Method in interface nxopen.Step214Creator

Deprecated.

Deprecated in NX11.0.0. Use StepCreator instead.

setFileSaveFlag(boolean) - Method in interface nxopen.StepCreator

License requirements: None.

setFileSpecification(String) - Method in interface nxopen.markup.File

License requirements: None.

setFileSpecificationOfPartToPlace(String) - Method in interface nxopen.mechanicalrouting.PartPlacementBuilder

Sets the file specification of the part to place
License requirements: routing_base ("Routing Basic")
.

setFileSpecificationOfStockToPlace(String) - Method in interface nxopen.mechanicalrouting.PathStockPreferenceBuilder

Sets the file specification of the part to place
License requirements: routing_base ("Routing Basic")
.

setFilesToProcess(String[]) - Method in interface nxopen.annotations.ImportSymbolBuilder

Sets the names of the selected files
License requirements: nx_layout ("NX Layout")
.

setFileTceName(String) - Method in interface nxopen.motion.FlexBodyBuilder

License requirements: mechanisms ("MECHANISMS")
.

setFileType(LaminateImportedLayupBuilder.FileEnum) - Method in interface nxopen.cae.LaminateImportedLayupBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setFileUnits(STLImporter.FileUnitsType) - Method in interface nxopen.STLImporter

Sets the file units.

setFileUnits(VRMLImporter.FileUnitsType) - Method in interface nxopen.VRMLImporter

Sets the file units.

setFileWritable(String, boolean) - Method in interface nxopen.RemoteUtilities

Sets a file's permissions to be writable by the NX session.

setFillArea(boolean) - Method in interface nxopen.markup.EditObjectDisplayBuilder

License requirements: None.

setFillClientData(StandardPartData) - Method in interface nxopen.tooling.MoldFillingBuilder

Sets standard part client data.

setFilled(boolean) - Method in interface nxopen.cae.xyplot.TextBoxStyleSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setFilletAxialElementSizeOption(MeshControlBuilder.FilletAxialElementSizeType) - Method in interface nxopen.cae.MeshControlBuilder

License requirements: None.

setFilletCircumNumberElements(int) - Method in interface nxopen.cae.MeshControlBuilder

License requirements: None.

setFilletCircumSizeOption(MeshControlBuilder.FilletCircumferenceSizeType) - Method in interface nxopen.cae.MeshControlBuilder

License requirements: None.

setFilletColor(int) - Method in interface nxopen.weld.WeldJointBuilder

License requirements: structure_weld ("STRUCTURE WELD")
.

setFilletDensitySize(int) - Method in interface nxopen.cae.MeshControlDisplayOptionsBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setFilletDirectionVector(Direction) - Method in interface nxopen.features.AOCSBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.

setFilletFont(DisplayableObject.ObjectFont) - Method in interface nxopen.weld.WeldJointBuilder

License requirements: structure_weld ("STRUCTURE WELD")
.

setFilletLengths(JointExitBuilder.FilletSizes) - Method in interface nxopen.weld.JointExitBuilder

Sets the fillet weld values for the side of the welding joint.

setFilletMethod(MeshControlBuilder.FilletType) - Method in interface nxopen.cae.MeshControlBuilder

License requirements: None.

setFilletOption(AOCSBuilder.FilletOptions) - Method in interface nxopen.features.AOCSBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.

setFilletRadius(double) - Method in interface nxopen.cae.CrossSectionParameters

Turns on the fillets flag
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setFilletRadius(Expression) - Method in interface nxopen.features.AOCSBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.

setFilletRadius(String) - Method in interface nxopen.features.sheetmetal.DimpleBuilder

Deprecated.

Deprecated in NX10.0.0. Use Expression.setRightHandSide(java.lang.String) on the Expression object returned from DimpleBuilder.getFilletRadius() instead.

setFilletradscale(double) - Method in interface nxopen.cae.ResultVariable

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setFillets(boolean) - Method in interface nxopen.cae.CrossSectionParameters

Turns on the fillets flag
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setFilletSectionCorners(boolean) - Method in interface nxopen.features.sheetmetal.DimpleBuilder

Sets the Rounding Option for section Corners which contain Non Fillet Radii
License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setFilletSectionCorners(boolean) - Method in interface nxopen.features.sheetmetal.DrawnCutoutBuilder

Sets the Rounding Option for section Corners which contain Non Fillet Radii
License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setFilletType(FilletBuilder.EnumWeldingType) - Method in interface nxopen.weld.FilletBuilder

License requirements: ugweld ("UG WELD")
.

setFilletWidth(DisplayableObject.ObjectWidth) - Method in interface nxopen.weld.WeldJointBuilder

License requirements: structure_weld ("STRUCTURE WELD")
.

setFillForAddendum(boolean) - Method in interface nxopen.die.FillBuilder

Sets the fill for addendum setting of the area fill
License requirements: die_engineering ("DIE ENGINEERING")
.

setFillHolesOption(boolean) - Method in interface nxopen.cae.Shell2SolidBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setFillingCoefficient(double) - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setFillingColor(NXColor) - Method in interface nxopen.cae.xyplot.BaseBarStyleSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setFillingColor(NXColor) - Method in interface nxopen.cae.xyplot.BasePlateStyleSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setFillingColor(NXColor) - Method in interface nxopen.cae.xyplot.SurfaceStyleSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setFillingColor(NXColor) - Method in interface nxopen.cae.xyplot.TextBoxStyleSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setFillName(String) - Method in interface nxopen.cae.LaminateFillSetupBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setFillOptions(PatternFill.PatternFillOptions) - Method in interface nxopen.geometricutilities.PatternFill

License requirements: None.

setFillPathLength(GeomcopyBuilder.AlongPathDistanceOptions) - Method in interface nxopen.features.GeomcopyBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setFillShape(Body[]) - Method in interface nxopen.die.FillBuilder

Sets the fill shape of the area fill
License requirements: die_engineering ("DIE ENGINEERING")
.

setFilter(PinListBuilder.FilterType) - Method in interface nxopen.annotations.PinListBuilder

License requirements: routing_harness ("Routing Harness")
.

setFilter(String) - Method in interface nxopen.blockstyler.FileSelection

License requirements: None.

setFilter(CompDrawingBuilder.FilterSelection) - Method in interface nxopen.tooling.CompDrawingBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setFilter(ConnectionFinderBuilder.FilterTypes) - Method in interface nxopen.weld.ConnectionFinderBuilder

License requirements: ugweld ("UG WELD")
.

setFilterBlankingAttribute(String) - Method in interface nxopen.preferences.RoutingElectrical

Sets the Rlist_Filter_Blanking_Attribute.

setFilterCondition(Condition) - Method in interface nxopen.visualreporting.Rule

License requirements: nx_visual_reporting ("Visual Reporting")
.

setFilterConditionOfRule(Rule, Condition) - Method in interface nxopen.visualreporting.VisualReportBuilder

Sets the filter Condition from this rule.

setFilteredPlacementSolutions(PlacementSolution[]) - Method in interface nxopen.placement.PlacementEngineBuilder

Sets the input PlacementSolutions as the filtered solutions on the PlacementEngineBuilder in the given order.

setFilterEnum(InspectionGraphicalReportBuilder.GraphicalReportFilter) - Method in interface nxopen.cam.InspectionGraphicalReportBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setFilterFormatFileName(String) - Method in interface nxopen.preferences.RoutingElectrical

Sets the file name for the stand alone XML filters and formats file.

setFilterNavigator(boolean) - Method in interface nxopen.assemblies.ConstraintDisplayBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setFilterOptionValue(DesignRuleViolationViewer.FilterOption) - Method in interface nxopen.routing.DesignRuleViolationViewer

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setFilterPaths(Path[]) - Method in interface nxopen.routing.ManualRouteBuilder

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setFilterString(String) - Method in interface nxopen.routing.CompareRunsBuilder

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setFilterType(LaminateSpreadsheetReportBuilder.FilteringType) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setFilterType(StockBrowserBuilder.TypeFilter) - Method in interface nxopen.routing.StockBrowserBuilder

Sets the stock type filter which defines the type of stock
License requirements: routing_base ("Routing Basic")
.

setFinalRetractType(CenterlineDrillTurningBuilder.FinalRetractTypes) - Method in interface nxopen.cam.CenterlineDrillTurningBuilder

License requirements: None.

setFinalStock(double) - Method in interface nxopen.cam.GeometrySet

License requirements: cam_base ("CAM BASE")
.

setFinalType(NcmHoleMachining.FinalTypes) - Method in interface nxopen.cam.NcmHoleMachining

License requirements: cam_base ("CAM BASE")
.

setFinalType(NcmPlanarBuilder.FinalTypes) - Method in interface nxopen.cam.NcmPlanarBuilder

License requirements: cam_base ("CAM BASE")
.

setFinalType(NcmTransferTypes.FinalTypes) - Method in interface nxopen.cam.NcmTransferTypes

License requirements: cam_base ("CAM BASE")
.

setFindApparentIntersections(boolean) - Method in interface nxopen.annotations.HatchStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setFindScopeOption(int) - Method in interface nxopen.features.CurveFinderBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setFinePrecision(double) - Method in interface nxopen.sim.KinematicAxisBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setFinish(DraftingSurfaceFinishBuilder.FinishType) - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder

License requirements: drafting ("DRAFTING")
.

setFinish(SurfaceFinishBuilder.FinishType) - Method in interface nxopen.annotations.SurfaceFinishBuilder

License requirements: None.

setFinishAtSafePlane(boolean) - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setFinishMethod(FinishMethod) - Method in interface nxopen.annotations.LineWeldSideData

Sets the weld finish method
License requirements: None.

setFinishMethod(FinishMethod) - Method in interface nxopen.weld.JointExitBuilder

License requirements: structure_weld ("STRUCTURE WELD")
.

setFinishOperation(boolean) - Method in interface nxopen.die.FlangeTaskBuilder

Sets the finish operation of the flange task
License requirements: die_engineering ("DIE ENGINEERING")
.

setFinishOperation(boolean) - Method in interface nxopen.die.FormTaskBuilder

Sets the finish operation switch of the form task, if true the form task is a finish operation, if false it is not.

setFinishOperation(boolean) - Method in interface nxopen.die.PierceTaskBuilder

Sets the finish operation of the pierce task True indicates the pierce is to be a finish pierce.

setFinishOperation(boolean) - Method in interface nxopen.die.TrimTaskBuilder

Sets the finish operation of the trim task True indicates the trim is to be a finish trim.

setFinishOperation(boolean) - Method in interface nxopen.tooling.DieEngFormTaskBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setFinishOperation(boolean) - Method in interface nxopen.tooling.DieEngTrimTaskBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setFinishPasses(CutParametersFinishPassesTypes) - Method in interface nxopen.cam.TurnCutParameters

License requirements: cam_base ("CAM BASE")
.

setFinishPasses(int) - Method in interface nxopen.cam.WedmBasedGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setFinishSymbol(LineWeldDataBuilder.FinishSymbolType) - Method in interface nxopen.annotations.LineWeldDataBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setFirstArrowheadCfw(LineCfw) - Method in interface nxopen.annotations.LineAndArrowPreferences

Sets the first arrowhead color, font, and width
License requirements: None.

setFirstArrowheadColor(NXColor) - Method in interface nxopen.annotations.LineArrowStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setFirstArrowheadFont(DisplayableObject.ObjectFont) - Method in interface nxopen.annotations.LineArrowStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setFirstArrowheadWidth(LineWidth) - Method in interface nxopen.annotations.LineArrowStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setFirstArrowLineCfw(LineCfw) - Method in interface nxopen.annotations.LineAndArrowPreferences

Sets the first arrow line color, font, and width
License requirements: None.

setFirstArrowLineColor(NXColor) - Method in interface nxopen.annotations.LineArrowStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setFirstArrowLineFont(DisplayableObject.ObjectFont) - Method in interface nxopen.annotations.LineArrowStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setFirstArrowLineWidth(LineWidth) - Method in interface nxopen.annotations.LineArrowStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setFirstArrowType(ArrowheadType) - Method in interface nxopen.annotations.LineAndArrowPreferences

Sets the first arrow type
License requirements: None.

setFirstArrowType(ArrowheadType) - Method in interface nxopen.annotations.LineArrowStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setFirstAssociativity(Associativity) - Method in interface nxopen.annotations.Dimension

Sets the first associativity data.

setFirstAssociativityVectorFlipped(boolean) - Method in interface nxopen.annotations.BaseAngularDimensionBuilder

First associativity vector flipped
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING")
.

setFirstAssociativityVectorFlipped(boolean) - Method in interface nxopen.annotations.BaseRapidDimensionBuilder

First associativity vector flipped
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING")
.

setFirstBody(DisplayableObject) - Method in interface nxopen.mechatronics.ChangeMaterialBuilder

Sets the first object.

setFirstBody(DisplayableObject) - Method in interface nxopen.mechatronics.PreventCollisionBuilder

Sets the first object.

setFirstBoundingObjectEndOption(TrimCurveBuilder.FirstBoundingObjectEndOptions) - Method in interface nxopen.features.TrimCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setFirstBoundingObjectOption(TrimCurveBuilder.FirstBoundingObjectOptions) - Method in interface nxopen.features.TrimCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setFirstBoundingObjectPickPoint(Point3d) - Method in interface nxopen.features.TrimCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setFirstBoundingPlane(Plane) - Method in interface nxopen.features.TrimCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setFirstBranchID(String) - Method in interface nxopen.routing.BranchPathNumberingBuilder

License requirements: routing_hvac ("Routing HVAC")
.

setFirstChainInstallDirection(StandardPartItemBuilder.Direction) - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setFirstClearance(double) - Method in interface nxopen.tooling.SpecialFormingBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setFirstCompartment(String) - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setFirstConstraintCurveCollector(ScCollector) - Method in interface nxopen.geometricutilities.ConicCrossSection

License requirements: solid_modeling ("SOLIDS MODELING")
.

setFirstConveyingSurfaceCroner(Point) - Method in interface nxopen.linedesigner.SingleElementConveyorBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setFirstCsys(CoordinateSystem) - Method in interface nxopen.motion.JointDefine

Sets the CSYS of first link
License requirements: mechanisms ("MECHANISMS")
.

setFirstCurve(NXObject) - Method in interface nxopen.cam.TeachmodeLinearMoveBuilder

License requirements: cam_base ("CAM BASE")
.

setFirstCurve(Curve) - Method in interface nxopen.features.GeodesicChamferBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setFirstCurve(Curve) - Method in interface nxopen.features.GeodesicFilletBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setFirstCurveMaximumPenetration(double) - Method in interface nxopen.motion.CurveContactRecurdyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using CurveContactRecurdyn.firstCurveMaximumPenetrationExpression() to query or edit it.

setFirstCurveStock(double) - Method in interface nxopen.cam.TeachmodeLinearMoveBuilder

License requirements: cam_base ("CAM BASE")
.

setFirstCurveToolPosition(TeachmodeLinearMoveBuilder.CurveToolPositionTypes) - Method in interface nxopen.cam.TeachmodeLinearMoveBuilder

License requirements: cam_base ("CAM BASE")
.

setFirstCut(int) - Method in interface nxopen.cam.DmStreamlineCutStep

License requirements: cam_base ("CAM BASE")
.

setFirstCut(NXColor) - Method in interface nxopen.cam.PathDisplayColors

License requirements: cam_base ("CAM BASE")
.

setFirstCutMode(Cycle.CutMode) - Method in interface nxopen.cam.Cycle

License requirements: cam_base ("CAM BASE")
.

setFirstCuttingEdge(double) - Method in interface nxopen.cam.TurnCutterClearance

License requirements: cam_base ("CAM BASE")
.

setFirstCutValue(double) - Method in interface nxopen.cam.Cycle

License requirements: cam_base ("CAM BASE")
.

setFirstDefinitionPoint(Point3d) - Method in interface nxopen.annotations.Associativity

Sets the first definition point.

setFirstDistance(String) - Method in interface nxopen.features.sheetmetal.FlangeBuilder

Deprecated.

Deprecated in NX10.0.0. Use Expression.setRightHandSide(java.lang.String) on the Expression object returned from FlangeBuilder.firstDistance() instead.

setFirstDriverJointLowerLimit(double) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setFirstDriverJointSteps(int) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setFirstDriverJointUpperLimit(double) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setFirstEdgeContinuityReversed(boolean) - Method in interface nxopen.features.BridgeSurfaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setFirstEdgeLimitEndToEnd(boolean) - Method in interface nxopen.features.BridgeSurfaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setFirstEdgeReversed(boolean) - Method in interface nxopen.features.BridgeSurfaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setFirstElementSplitType(int) - Method in interface nxopen.cae.ElementSplitBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setFirstEndPoint(Point) - Method in interface nxopen.formboard.PathLengthAnnotationBuilder

License requirements: routing_harness ("Routing Harness")
.

setFirstExtensionLineCfw(LineCfw) - Method in interface nxopen.annotations.LineAndArrowPreferences

Sets the first extension line color, font, and width
License requirements: None.

setFirstExtensionLineColor(NXColor) - Method in interface nxopen.annotations.LineArrowStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setFirstExtensionLineFont(DisplayableObject.ObjectFont) - Method in interface nxopen.annotations.LineArrowStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setFirstExtensionLineWidth(LineWidth) - Method in interface nxopen.annotations.LineArrowStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setFirstFaceCollector(ScCollector) - Method in interface nxopen.features.FaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setFirstFaceset(ScCollector) - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. Use WeldGrooveBuilder.faceSet1() instead.

setFirstFacesetBottomEdges(Section) - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. Use WeldGrooveBuilder.edgeSet1() instead.

setFirstFacesetEndAdjacentFaces(Face[]) - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. This functionality is no longer supported.

setFirstFacesetHelpPoint(Point3d) - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. Use WeldGrooveBuilder.seedPoint1() and WeldGrooveBuilder.setSeedPoint1(nxopen.Point3d) instead.

setFirstFacesetNormalReversed(boolean) - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. This functionality is no longer supported.

setFirstFacesetStartAdjacentFaces(Face[]) - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. This functionality is no longer supported.

setFirstFacesetTopEdges(Section) - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. Use WeldGrooveBuilder.edgeSet1() instead.

setFirstGeometryBoundingBufferLength(double) - Method in interface nxopen.motion.BodyContactRecurdyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using BodyContactRecurdyn.firstGeometryBoundingBufferLengthExpression() to query or edit it.

setFirstGeometryMaterialDirection(CurveContactBuilder.GeometryMaterialSide) - Method in interface nxopen.motion.CurveContactBuilder

License requirements: mechanisms ("MECHANISMS")
.

setFirstGeometryMaxFacetSizeFactor(double) - Method in interface nxopen.motion.BodyContactRecurdyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using BodyContactRecurdyn.firstGeometryMaxFacetSizeFactorExpression() to query or edit it.

setFirstGeometryMaxFacetSizeFactorFlag(boolean) - Method in interface nxopen.motion.BodyContactRecurdyn

License requirements: mechanisms ("MECHANISMS")
.

setFirstGeometryMaximumPenetration(double) - Method in interface nxopen.motion.BodyContactRecurdyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using BodyContactRecurdyn.firstGeometryMaximumPenetrationExpression() to query or edit it.

setFirstGeometryPlaneToleranceFactor(double) - Method in interface nxopen.motion.BodyContactRecurdyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using BodyContactRecurdyn.firstGeometryPlaneToleranceFactorExpression() to query or edit it.

setFirstGeometryPlaneToleranceFactorSolidContact(double) - Method in interface nxopen.motion.BodyContactRecurdyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using BodyContactRecurdyn.firstGeometryPlaneToleranceFactorSolidContactExpression() to query or edit it.

setFirstJogAngle(double) - Method in interface nxopen.annotations.LineArrowStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setFirstJogDisplay(boolean) - Method in interface nxopen.annotations.LineArrowStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setFirstJogEndOffset(double) - Method in interface nxopen.annotations.LineArrowStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setFirstJogOrientation(JogOrientation) - Method in interface nxopen.annotations.LineArrowStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setFirstJogStartOffset(double) - Method in interface nxopen.annotations.LineArrowStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setFirstLength(double) - Method in interface nxopen.tooling.DieBaseBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setFirstLimitPoint(Point3d) - Method in interface nxopen.die.OutputCurvesBuilder

Sets the first limit point.

setFirstLinearDistance(double) - Method in interface nxopen.cam.ToolPathEditorBuilder

License requirements: None.

setFirstLink(Link) - Method in interface nxopen.motion.JointDefine

Sets the first link object
License requirements: mechanisms ("MECHANISMS")
.

setFirstMargin(NXObject) - Method in interface nxopen.tooling.AutoDimensionBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setFirstMarginOffset(double) - Method in interface nxopen.annotations.OrdinateDimensionPreferences

Sets the first margin offset
License requirements: None.

setFirstMatrix(NXMatrix) - Method in interface nxopen.motion.JointDefine

Sets the matrix of first link
License requirements: mechanisms ("MECHANISMS")
.

setFirstObject(NXObject) - Method in interface nxopen.annotations.Associativity

Sets the first associativity object
License requirements: None.

setFirstObjectFilter(CollisionPairBuilder.Filter) - Method in interface nxopen.cam.CollisionPairBuilder

License requirements: cam_base ("CAM BASE")
.

setFirstObjectName(String) - Method in interface nxopen.cam.CollisionPairBuilder

License requirements: cam_base ("CAM BASE")
.

setFirstOffset(String) - Method in interface nxopen.features.ChamferBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setFirstOffset(String) - Method in interface nxopen.geometricutilities.ConicCrossSection

Deprecated.

Deprecated in NX9.0.0. To set the value of the expression modify the expression directly using ConicCrossSection.firstOffset() and Expression.setRightHandSide(java.lang.String) .

setFirstOffsetOption(ConicCrossSection.OffsetMethod) - Method in interface nxopen.geometricutilities.ConicCrossSection

License requirements: solid_modeling ("SOLIDS MODELING")
.

setFirstOrientationType(JointDefine.OrientationType) - Method in interface nxopen.motion.JointDefine

License requirements: mechanisms ("MECHANISMS")
.

setFirstOrigin(Point) - Method in interface nxopen.motion.JointDefine

Sets the origin of first link
License requirements: mechanisms ("MECHANISMS")
.

setFirstPlane(Plane) - Method in interface nxopen.features.IntersectionCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setFirstPlane(Plane) - Method in interface nxopen.routing.FittingOverstockBuilder

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setFirstPlungeOnly(boolean) - Method in interface nxopen.cam.ChipControl

License requirements: cam_base ("CAM BASE")
.

setFirstPoint(double) - Method in interface nxopen.features.GeodesicChamferBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setFirstPoint(double) - Method in interface nxopen.features.GeodesicFilletBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setFirstPosToExtensionLineDistance(double) - Method in interface nxopen.annotations.LineArrowStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setFirstPosToExtLineDist(double) - Method in interface nxopen.annotations.LineAndArrowPreferences

Sets the first position to extension line distance
License requirements: None.

setFirstPtSelect(Point) - Method in interface nxopen.cae.FaceFromBoundaryBuilder

License requirements: None.

setFirstRadius(double) - Method in interface nxopen.cam.TurnEngageRetractBuilder

License requirements: cam_base ("CAM BASE")
.

setFirstScale(double) - Method in interface nxopen.motion.GeneralCouplerBuilder

Deprecated.

Deprecated in NX8.5.0. Obtion the exression using GeneralCouplerBuilder.firstScaleExpression() to query or edit it.

setFirstSection(Section) - Method in interface nxopen.features.GeodesicChamferBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setFirstSection(Section) - Method in interface nxopen.features.GeodesicFilletBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setFirstSection(Section) - Method in interface nxopen.features.RuledBuilder

License requirements: features_modeling ("FEATURES MODELING") OR nx_freeform_1 ("basic freeform modeling")
.

setFirstSection(Section) - Method in interface nxopen.weld.WeldPointBuilder

The commit for first section
License requirements: ugweld ("UG WELD")
.

setFirstSegment(ISegment) - Method in interface nxopen.routing.DiscontinuityCorner

Sets the first segment of a discontinuity corner, segment must be attached to the Routing.ControlPoint that defines this corner.

setFirstType(GcouplerMovementTypes) - Method in interface nxopen.motion.GeneralCouplerBuilder

License requirements: mechanisms ("MECHANISMS")
.

setFirstVector(Direction) - Method in interface nxopen.annotations.BaseAngularDimensionBuilder

License requirements: drafting ("DRAFTING")
.

setFirstVector(Direction) - Method in interface nxopen.motion.JointDefine

Sets the direction of first link
License requirements: mechanisms ("MECHANISMS")
.

setFirstVectorView(View) - Method in interface nxopen.annotations.BaseAngularDimensionBuilder

License requirements: drafting ("DRAFTING")
.

setFit(NXObject, String) - Method in interface nxopen.tooling.ReusablePocketBuilder

Sets fit for hole series.

setFitCharSizes(Tag, int, int, double, double) - Method in interface nxopen.uf.UFPlist

Deprecated.

The equivalent Open C method has retired

setFitConstraints(BestFitAlignBuilder.ConstraintOptions) - Method in interface nxopen.facet.BestFitAlignBuilder

Sets the fit constraint
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_1 ("basic freeform modeling")
.

setFitDirection(Direction) - Method in interface nxopen.features.RefitFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setFitFaceStatus(boolean) - Method in interface nxopen.tooling.StockSizeBuilder

Find out those extreme planar faces, and set fitting face status in all directions.

setFitMethod(CurveFitData.Method) - Method in interface nxopen.geometricutilities.CurveFitData

License requirements: None.

setFitMethod(MeshParameterData.Type) - Method in interface nxopen.MeshParameterData

Sets
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

setFitMethods(TableCellStyleBuilder.FitMethodType[]) - Method in interface nxopen.annotations.TableCellStyleBuilder

Set fit methods
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setFitOption(CurveFitOptions.FitMethod) - Method in interface nxopen.geometricutilities.CurveFitOptions

Sets the curve fit method
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setFitOption(String) - Method in interface nxopen.geometricutilities.EndHoleData

License requirements: solid_modeling ("SOLIDS MODELING")
.

setFitOption(String) - Method in interface nxopen.geometricutilities.MiddleHoleData

License requirements: solid_modeling ("SOLIDS MODELING")
.

setFitOption(String) - Method in interface nxopen.geometricutilities.StartHoleData

License requirements: solid_modeling ("SOLIDS MODELING")
.

setFitPercentage(int) - Method in interface nxopen.preferences.SessionVisualizationScreen

Sets the fit percentage.

setFitRules(Tag, int[]) - Method in interface nxopen.uf.UFPlist

Deprecated.

The equivalent Open C method has retired

setFittingParameters(FitCurveBuilder.FittingParametersOptions) - Method in interface nxopen.features.FitCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setFittingPoint(Point) - Method in interface nxopen.tooling.ChannelFittingBuilder

License requirements: None.

setFitToleranceParentheses(boolean) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setFitToleranceSeparator(boolean) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setFitToSectionClipPlanes(boolean) - Method in interface nxopen.preferences.SessionVisualizationScreen

Sets the option to specify whether, when sectioning is enabled for a view, the bounds computed by a Fit operation should be limited by the sectioning clipping planes.

setFixAtCurrentTimestamp(boolean) - Method in interface nxopen.features.CompositeCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setFixAtCurrentTimestamp(boolean) - Method in interface nxopen.features.ExtractFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setFixAtCurrentTimestamp(boolean) - Method in interface nxopen.features.MirrorBodyBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setFixAtCurrentTimestamp(boolean) - Method in interface nxopen.features.WaveLinkBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setFixAtCurrentTimestamp(boolean) - Method in interface nxopen.features.WavePointBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setFixed(boolean) - Method in interface nxopen.geometricanalysis.FaceAnalysisDataRangeBuilder

License requirements: None.

setFixed(boolean) - Method in interface nxopen.geometricutilities.Continuity

License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

setFixed(boolean) - Method in interface nxopen.motion.LinkBuilder

License requirements: mechanisms ("MECHANISMS")
.

setFixedCsys(NXObject) - Method in interface nxopen.geometricutilities.OrientXpressBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setFixedCsys(CoordinateSystem) - Method in interface nxopen.weld.JointmarkBuilder

License requirements: ugweld ("UG WELD")
.

setFixedCurvesContinuity(FtmFixedCurvesBuilder.FixedCurvesContinuityType) - Method in interface nxopen.geometricutilities.FtmFixedCurvesBuilder

License requirements: None.

setFixedDatumAxis(DatumAxisBuilder.FixedType) - Method in interface nxopen.features.DatumAxisBuilder

Sets type of fixed datum axis
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setFixedDatumPlane(DatumPlaneBuilder.FixedType) - Method in interface nxopen.features.DatumPlaneBuilder

Sets type of fixed datum plane.

setFixedDirection(boolean) - Method in interface nxopen.mechatronics.BreakingConstraintBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setFixedLocationPercentage(double) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setFixedSide(BendBuilder.FixedSideOptions) - Method in interface nxopen.features.sheetmetal.BendBuilder

Sets the Fixed Side
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setFixedSide(JogBuilder.FixedSideOptions) - Method in interface nxopen.features.sheetmetal.JogBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setFixedSizeDatum(boolean) - Method in interface nxopen.features.DatumCsysBuilder

Deprecated.

Deprecated in NX7.5.1. This property is now always TRUE and calls to this property can be safely removed.

setFixedStringOption(StyledSweepBuilder.FixedStringOptions) - Method in interface nxopen.features.StyledSweepBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setFixedTextSize(double) - Method in interface nxopen.preferences.SessionSketch

Sets the dimension text size when the text size fixed flag is set.

setFixedTextSize(double) - Method in interface nxopen.preferences.SketchPreferences

Sets the fixed text size.

setFixedVector(SmartObject) - Method in interface nxopen.cam.PmopToolAxisCiBuilder

License requirements: cam_base ("CAM BASE")
.

setFixedVector(SmartObject) - Method in interface nxopen.cam.PreprocessGeometryBuilder

License requirements: cam_base ("CAM BASE")
.

setFixHint(boolean) - Method in interface nxopen.positioning.ConstraintReference

Set a hint to the solver to fix the movable object associated with this constraint reference.

setFixHintForUpdate(boolean) - Method in interface nxopen.positioning.ConstraintReference

Set a hint to the solver to fix the movable object associated with this constraint reference.

setFixOffplaneSketchCurves(boolean) - Method in interface nxopen.PartCleanup

Sets the option that specifies whether to fix off-plane sketch curves.

setFixSurfaceNodes(boolean) - Method in interface nxopen.cae.optimization.TBSMeshSmooth

License requirements: cae_opt_toposhape ("NX Shape Optimization")
.

setFixTabFlangePosition(boolean) - Method in interface nxopen.tooling.BendOperationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setFixtures(boolean) - Method in interface nxopen.assemblies.MechanicalRoutingSubsetBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setFlagOfUsingContainer(boolean) - Method in interface nxopen.mechatronics.RuntimeNCBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setFlagOfUsingSpecifiedMCF(boolean) - Method in interface nxopen.mechatronics.RuntimeNCBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setFlangeBendProfile(DirectionOption, IProfile[]) - Method in interface nxopen.die.RotorBuilder

Sets the flange bend profile of the rotor casting.

setFlangeCheckHeight(WeldAdvisorCustomerDefault, double) - Method in interface nxopen.weld.WeldAdvisorBuilder

The weld advisor parameter Flange Check Height
License requirements: ugweld ("UG WELD")
.

setFlangeCheckRadius(WeldAdvisorCustomerDefault, double) - Method in interface nxopen.weld.WeldAdvisorBuilder

The weld advisor parameter Flange Check Radius
License requirements: ugweld ("UG WELD")
.

setFlangeDirection(Direction) - Method in interface nxopen.die.DieAssistantFlangeProfile

License requirements: None.

setFlangeDirection(boolean) - Method in interface nxopen.routing.WatertightFittingsBuilder

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setFlangeEndProfile(DirectionOption, IProfile[]) - Method in interface nxopen.die.SteelInsertBuilder

Sets the flange end profile of the steel insert
License requirements: ug_die_design ("Die Design")
.

setFlangeFactor(int) - Method in interface nxopen.features.SilhouetteFlangeBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setFlangeOffset(double) - Method in interface nxopen.tooling.DieDesDrawDieBuilder

License requirements: ug_die_design ("Die Design")
.

setFlangeProcFactor(Tag, double) - Method in interface nxopen.uf.UFModlSmd

Refer to UF_MODL_set_flange_proc_factor for documentation.

setFlangeProfileDirection(DirectionOption) - Method in interface nxopen.die.DieAssistantFlangeProfile

License requirements: None.

setFlangeSide(boolean) - Method in interface nxopen.die.DieAssistantFlangeProfile

License requirements: None.

setFlangeType(DieAssistantFlangeProfileType) - Method in interface nxopen.die.DieAssistantFlangeProfile

License requirements: None.

setFlangeWallAttributes(String, String, int) - Method in interface nxopen.die.RotorSectionBuilder

Sets the flange wall faces attributes
License requirements: ug_die_design ("Die Design")
.

setFlangeWallAttributes(String, String, int) - Method in interface nxopen.die.SteelInsertSectionBuilder

Sets the flange wall attributes
License requirements: ug_die_design ("Die Design")
.

setFlatnessTolerance(double) - Method in interface nxopen.geometricanalysis.DupinBuilder

License requirements: None.

setFlatOvalDimensions(double, double) - Method in interface nxopen.routing.PathStockBuilder

Set the FlatOval height and width value for the FlatOval space reservation assignment
License requirements: routing_base ("Routing Basic")
.

setFlatPatternCalloutOrientationType(PartFlexiblePrintedCircuitDesign.FlatPatternCalloutOrientationType) - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign

Sets the orientation type for flat pattern callouts.

setFlatPatternCalloutOrientationType(PartSheetmetal.FlatPatternCalloutOrientationType) - Method in interface nxopen.preferences.PartSheetmetal

Sets the orientation type for flat pattern callouts.

setFlatPatternCalloutTypeContents(String, String[]) - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign

Sets the contents for a callout type.

setFlatPatternCalloutTypeContents(String, String[]) - Method in interface nxopen.preferences.PartSheetmetal

Sets the contents for a callout type.

setFlatPatternCalloutTypeDisplay(String, PartFlexiblePrintedCircuitDesign.FlatPatternCalloutTypeDisplay) - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign

Sets the display data for a callout type.

setFlatPatternCalloutTypeDisplay(String, PartSheetmetal.FlatPatternCalloutTypeDisplay) - Method in interface nxopen.preferences.PartSheetmetal

Sets the display data for a callout type.

setFlatPatternCalloutTypeDisplay(String, FlatPatternSettings.FlatPatternCalloutTypeDisplay) - Method in interface nxopen.sheetmetal.FlatPatternSettings

Sets the display data for a callout type.

setFlatPatternCompensation(boolean) - Method in interface nxopen.features.sheetmetal.JoggleBuilder

License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setFlatPatternCompensationAtEnd(boolean) - Method in interface nxopen.features.sheetmetal.AdvancedFlangeBuilder

License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setFlatPatternCompensationAtStart(boolean) - Method in interface nxopen.features.sheetmetal.AdvancedFlangeBuilder

License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setFlatPatternObjectTypeDisplay(boolean, PartFlexiblePrintedCircuitDesign.FlatPatternObjectType, PartFlexiblePrintedCircuitDesign.FlatPatternObjectTypeDisplay) - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign

Sets the display data for a flat pattern object type.

setFlatPatternObjectTypeDisplay(boolean, PartSheetmetal.FlatPatternObjectType, PartSheetmetal.FlatPatternObjectTypeDisplay) - Method in interface nxopen.preferences.PartSheetmetal

Sets the display data for a flat pattern object type.

setFlatPatternObjectTypeDisplay(FlatPatternSettings.FlatPatternObjectType, FlatPatternSettings.FlatPatternObjectTypeDisplay) - Method in interface nxopen.sheetmetal.FlatPatternSettings

Sets the display data for a flat pattern object type.

setFlattenAssembly(boolean) - Method in interface nxopen.DxfdwgCreator

License requirements: None.

setFlattenAssembly(boolean) - Method in interface nxopen.IgesCreator

License requirements: None.

setFlattenAssembly(boolean) - Method in interface nxopen.IgesImporter

License requirements: None.

setFlattenAssembly(boolean) - Method in interface nxopen.Step203Importer

License requirements: None.

setFlattenAssembly(boolean) - Method in interface nxopen.Step214Importer

License requirements: None.

setFlattenAssembly(boolean) - Method in interface nxopen.Step242Importer

License requirements: None.

setFlattenHierarchy(boolean) - Method in interface nxopen.annotations.CutSheetBuilder

License requirements: routing_harness ("Routing Harness")
.

setFlattenHierarchy(boolean) - Method in interface nxopen.annotations.PinListBuilder

License requirements: routing_harness ("Routing Harness")
.

setFlatteningConstant(FlatteningBuilder.FlatteningConstantType) - Method in interface nxopen.FlatteningBuilder

Deprecated.

Deprecated in NX11.0.0. Use FlatteningAndFormingBuilder instead.

setFlexibleCableBottomFaceColor(NXColor) - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign

Sets the bottom face color.

setFlexibleCableBottomFaceColor(NXColor) - Method in interface nxopen.preferences.PartSheetmetal

THE bottom face color.

setFlexibleCableConductorSpacing(String) - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign

Sets the conductor spacing value string.

setFlexibleCableConductorWidth(String) - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign

Sets the conductor width value string.

setFlexibleCableContactFace(PartFlexiblePrintedCircuitDesign.FlexibleCableContactFaceOptions) - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign

Sets the contact face.

setFlexibleCableStrippingLength(String) - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign

Sets the stripping length value string.

setFlexibleCableTopFaceColor(NXColor) - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign

Sets the top face color.

setFlexibleCableTopFaceColor(NXColor) - Method in interface nxopen.preferences.PartSheetmetal

THE top face color.

setFlexibleLink(FlexBody) - Method in interface nxopen.motion.LoadTransferControl

Sets flexible link
License requirements: mechanisms ("MECHANISMS")
.

setFlip(boolean) - Method in interface nxopen.blockstyler.ReverseDirection

License requirements: None.

setFlip(boolean) - Method in interface nxopen.geometricutilities.CircularPattern

License requirements: None.

setFlip(boolean) - Method in interface nxopen.geometricutilities.HorizontalReference

License requirements: None.

setFlip(boolean) - Method in interface nxopen.geometricutilities.PolygonPattern

License requirements: None.

setFlip(boolean) - Method in interface nxopen.IPlane

Flip the direction of the plane
License requirements: None.

setFlipBaseNormalDirection(boolean) - Method in interface nxopen.features.GlobalShapingBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setFlipBaseUDirection(boolean) - Method in interface nxopen.features.GlobalShapingBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setFlipBaseVDirection(boolean) - Method in interface nxopen.features.GlobalShapingBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setFlipChamferOffsets(boolean) - Method in interface nxopen.features.ResizeChamferBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setFlipControlNormalDirection(boolean) - Method in interface nxopen.features.GlobalShapingBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setFlipControlUDirection(boolean) - Method in interface nxopen.features.GlobalShapingBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setFlipControlVDirection(boolean) - Method in interface nxopen.features.GlobalShapingBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setFlipDiagonals(boolean) - Method in interface nxopen.cae.MappedMeshBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setFlipDirection(boolean) - Method in interface nxopen.annotations.LineWeldBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setFlipDirection(boolean) - Method in interface nxopen.cae.DependentMeshListItemBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setFlipDirection(boolean) - Method in interface nxopen.cae.ManualSweepBetweenListItemSelection

License requirements: nx_masterfem ("Finite Element Modeling")
.

setFlipDirection(boolean) - Method in interface nxopen.cae.MeshManualSweepBetweenListItemSelection

License requirements: nx_masterfem ("Finite Element Modeling")
.

setFlipDirection(boolean) - Method in interface nxopen.cam.BoundaryTurnBlank

License requirements: cam_base ("CAM BASE")
.

setFlipDirection(boolean) - Method in interface nxopen.features.EmbossTarget

Sets the flip flag for translation direction
License requirements: solid_modeling ("SOLIDS MODELING")
.

setFlipDirection(AeroFlangeBuilder.DirType, boolean) - Method in interface nxopen.features.sheetmetal.AeroFlangeBuilder

Set flip direction.

setFlipDirection(boolean) - Method in interface nxopen.features.shipdesign.PlateBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setFlipDirection(boolean) - Method in interface nxopen.weld.JointmarkPointsBuilder

License requirements: ugweld ("UG WELD")
.

setFlipDirectionOption(boolean) - Method in interface nxopen.cae.Mesh1dBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setFlipHorizontal(boolean) - Method in interface nxopen.annotations.LineWeldBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setFlipJoggleSide(boolean) - Method in interface nxopen.features.sheetmetal.AeroJoggleBuilder

License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setFlipNormals(boolean) - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setFlipped(boolean) - Method in interface nxopen.geometricutilities.OnPathDimensionBuilder

License requirements: None.

setFlippedStatus(Flip) - Method in interface nxopen.routing.Stock

Sets whether or not the profile is flipped.

setFlipState(int) - Method in interface nxopen.cae.ElementExtrudeBuilder

Sets the flip state from the builder
License requirements: nx_masterfem ("Finite Element Modeling")
.

setFlipState(int) - Method in interface nxopen.cae.ElementProjectBuilder

Sets the flip state from the builder
License requirements: nx_masterfem ("Finite Element Modeling")
.

setFlipState(int) - Method in interface nxopen.cae.ElementTranslateBuilder

Sets the flip state from the builder
License requirements: nx_masterfem ("Finite Element Modeling")
.

setFlipState(int) - Method in interface nxopen.cae.WeldBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setFlipStock(boolean) - Method in interface nxopen.routing.OverstockBuilder

Sets the stock flip flag
License requirements: routing_advanced ("Routing Advanced") OR routing_harness ("Routing Harness") OR routing_cabling ("Routing Cabling") OR routing_pipetube ("Routing Piping and Tubing") OR routing_hvac ("Routing HVAC") OR routing_platform ("Routing Platform") OR routing_pid ("Routing PID")
.

setFlipStock(boolean) - Method in interface nxopen.routing.StockBuilder

Sets the stock flip flag
License requirements: routing_base ("Routing Basic")
.

setFlipTargetCurveOrientation(boolean) - Method in interface nxopen.features.MatchEdgeBuilder

License requirements: features_modeling ("FEATURES MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setFlipToolAroundHolder(boolean) - Method in interface nxopen.cam.TurningOperationBuilder

License requirements: cam_base ("CAM BASE")
.

setFlipToolAroundHolder(boolean) - Method in interface nxopen.cam.TurnToolProbingBuilder

License requirements: cam_base ("CAM BASE")
.

setFlipTrimDirection(boolean) - Method in interface nxopen.tooling.BendInsertDesignBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setFlipVertical(boolean) - Method in interface nxopen.annotations.LineWeldBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setFlipViewDirection(boolean) - Method in interface nxopen.features.shipdesign.SectionViewBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setFloat3Value(double[]) - Method in interface nxopen.display.CgfxAttributeValueFloat3Builder

Deprecated.

Deprecated in NX10.0.0. No alternative provided for this class.

setFloat4Value(double[]) - Method in interface nxopen.display.CgfxAttributeValueFloat4Builder

Deprecated.

Deprecated in NX10.0.0. No alternative provided for this class.

setFloor(boolean) - Method in interface nxopen.cam.DmCmMultiplePassesCiBuilder

License requirements: cam_base ("CAM BASE")
.

setFloorFaces(ScCollector) - Method in interface nxopen.cam.ManualFeatureBuilder

License requirements: None.

setFloorFaces(ScCollector) - Method in interface nxopen.features.AnalyzePocketBuilder

License requirements: None.

setFloorFaces(ScCollector) - Method in interface nxopen.features.BlendPocketBuilder

License requirements: None.

setFloorOrientationType(Stage.OrientationType) - Method in interface nxopen.display.Stage

License requirements: None.

setFloorPlane(Plane) - Method in interface nxopen.cam.GeometryCiBuilder

License requirements: cam_base ("CAM BASE")
.

setFloorSameAsPartStock(boolean) - Method in interface nxopen.cam.MillCutParameters

License requirements: cam_base ("CAM BASE")
.

setFloorStock(double) - Method in interface nxopen.cam.CutVolume

License requirements: cam_base ("CAM BASE")
.

setFlow(boolean) - Method in interface nxopen.die.DrawBeadSegmentBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setFlowArrowParameterA(double) - Method in interface nxopen.preferences.RoutingLogical

Sets the application view flow arrow parameter A
License requirements: routing_pid ("Routing PID")
.

setFlowArrowParameterB(double) - Method in interface nxopen.preferences.RoutingLogical

Sets the application view flow arrow parameter B
License requirements: routing_pid ("Routing PID")
.

setFlowArrowType(RoutingLogical.FlowArrowEnumType) - Method in interface nxopen.preferences.RoutingLogical

Sets the application view flow arrow type
License requirements: routing_pid ("Routing PID")
.

setFlowCurveCount(int) - Method in interface nxopen.cam.DPMItpBuilder

License requirements: cam_base ("CAM BASE")
.

setFlowCutDirection(FlowCutSteepContainment.CutDirectionTypes) - Method in interface nxopen.cam.FlowCutSteepContainment

License requirements: cam_base ("CAM BASE")
.

setFlowDirection(Vector3d) - Method in interface nxopen.die.LineupBuilder

Sets the flow direction of the lineup
License requirements: die_engineering ("DIE ENGINEERING")
.

setFlowDirection(NSidedSurfaceBuilder.FlowDirectionType) - Method in interface nxopen.features.NSidedSurfaceBuilder

License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

setFlowDirection(Port.FlowDirectionType) - Method in interface nxopen.routing.Port

Set the flow direction value of Port
License requirements: routing_base ("Routing Basic")

Created in NX5.0.0

setFlowDirectionType(FlowDirection.Type) - Method in interface nxopen.geometricutilities.FlowDirection

License requirements: nx_freeform_1 ("basic freeform modeling")
.

setFlowEdit(FlowBuilder.FlowEditTypes) - Method in interface nxopen.cam.FlowBuilder

License requirements: None.

setFlowIsActive(boolean) - Method in interface nxopen.cam.CycleCoolant

License requirements: cam_base ("CAM BASE")
.

setFlowMode(CycleCoolant.Flow) - Method in interface nxopen.cam.CycleCoolant

License requirements: cam_base ("CAM BASE")
.

setFlowOffsetMode(FlowBuilder.FlowOffsetModeType) - Method in interface nxopen.cam.FlowBuilder

License requirements: None.

setFlowType(SplitDuctBuilder.FlowTypes) - Method in interface nxopen.routing.SplitDuctBuilder

License requirements: routing_hvac ("Routing HVAC")
.

setFocalDistance(double) - Method in interface nxopen.display.CameraBuilder

License requirements: None.

setFocalLength(double) - Method in interface nxopen.Parabola

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setFocus() - Method in interface nxopen.uistyler.IntegerItem

Sets focus
License requirements: None.

setFocus() - Method in interface nxopen.uistyler.MultiTextBox

Indicates that this dialog item is receiving keyboard focus.

setFocus() - Method in interface nxopen.uistyler.PropertyPage

Sets focus
License requirements: None.

setFocus() - Method in interface nxopen.uistyler.PushButton

Indicates that this dialog item is receiving keyboard focus.

setFocus() - Method in interface nxopen.uistyler.RealItem

Sets focus
License requirements: None.

setFocus() - Method in interface nxopen.uistyler.SelectionBox

Indicates that this dialog item is receiving keyboard focus.

setFocus() - Method in interface nxopen.uistyler.SingleSelectList

Indicates that this dialog item is receiving keyboard focus.

setFocus() - Method in interface nxopen.uistyler.StringItem

Indicates that this dialog item is receiving keyboard focus
License requirements: None.

setFocus() - Method in interface nxopen.uistyler.TabControl

Sets focus
License requirements: None.

setFocus() - Method in interface nxopen.uistyler.Toggle

Indicates that this dialog item is receiving keyboard focus.

setFocus() - Method in interface nxopen.uistyler.WideString

Indicates that this dialog item is receiving keyboard focus.

setFogBackgroundColor(boolean) - Method in interface nxopen.preferences.ViewVisualizationSpecialEffects

Sets the use background color flag.

setFogBackValue(int) - Method in interface nxopen.preferences.ViewVisualizationSpecialEffects

Sets the fog back scale value.

setFogColorHLSValue(ViewVisualizationSpecialEffects.ColorHLS) - Method in interface nxopen.preferences.ViewVisualizationSpecialEffects

Sets the value of HLS color pattern
License requirements: None.

setFogColorHSVValue(ViewVisualizationSpecialEffects.ColorHSV) - Method in interface nxopen.preferences.ViewVisualizationSpecialEffects

Sets the value of HSV color pattern
License requirements: None.

setFogColorRGBValue(ViewVisualizationSpecialEffects.ColorRGB) - Method in interface nxopen.preferences.ViewVisualizationSpecialEffects

Sets the value of RGB color pattern
License requirements: None.

setFogFrontValue(int) - Method in interface nxopen.preferences.ViewVisualizationSpecialEffects

Sets the fog front scale value.

setFogOptions(Tag) - Method in interface nxopen.uf.UFView

Refer to UF_VIEW_set_fog_options for documentation.

setFogRateValue(int) - Method in interface nxopen.preferences.ViewVisualizationSpecialEffects

Sets the fog rate value.

setFogSetting(ViewVisualizationSpecialEffects.FogType) - Method in interface nxopen.preferences.ViewVisualizationSpecialEffects

Sets the fog setting type
License requirements: None.

setFogSettingOption(boolean) - Method in interface nxopen.preferences.ViewVisualizationSpecialEffects

Sets the fog option.

setFoldedEdges(CleanupFacetBodyBuilder.CleanupOptions) - Method in interface nxopen.facet.CleanupFacetBodyBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setFoldedRadius(boolean) - Method in interface nxopen.annotations.BaseRadialDimensionBuilder

Sets the is folded radius
License requirements: drafting ("DRAFTING")
.

setFoldedRadiusAngle(double) - Method in interface nxopen.annotations.DiameterRadiusPreferences

Sets the interior angle for folded radius type dimension
License requirements: None.

setFoldedRadiusAngle(double) - Method in interface nxopen.annotations.RadialStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setFoldedToggle(boolean) - Method in interface nxopen.drawings.SketchSectionLineBuilder

License requirements: drafting ("DRAFTING")
.

setFolder(String) - Method in interface nxopen.drafting.DrawingCreationWizardBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setFolder(boolean) - Method in interface nxopen.layout2d.PublishComponentBuilder

License requirements: nx_layout ("NX Layout")
.

setFolder(PMNavFolderObject) - Method in interface nxopen.mechatronics.SignalMappingBuilder

Sets folder in which the newly created connections will be stored.

setFolderBrowser(String) - Method in interface nxopen.tooling.FlowDisplayBuilder

License requirements: ug_mold_design ("UG MOLD")
.

setFolderName(String) - Method in interface nxopen.annotations.PartSymbolFolderBuilder

Sets folder name provided current folder is not root folder
License requirements: drafting ("DRAFTING")
.

setFolderName(String) - Method in interface nxopen.layout2d.LocalDefinitionFolderBuilder

License requirements: nx_layout ("NX Layout")
.

setFolderName(String) - Method in interface nxopen.linedesigner.ExportPlantToDWGBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setFolderName(String) - Method in interface nxopen.linedesigner.ExportToDWGBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setFoldTransitionType(int) - Method in interface nxopen.features.sheetmetal.BridgeTransitionBuilder

License requirements: nx_flexible_pcb ("NX Flexible PCB") OR nx_sheet_metal ("NX Sheet Metal")
.

setFollowCheck(boolean) - Method in interface nxopen.cam.MillCutParameters

License requirements: cam_base ("CAM BASE")
.

setFollowCurve(ISegment, Curve) - Method in interface nxopen.routing.SegmentManager

Set segment follow curve.

setFollowFaceProjDirOption(PatternOrientation.ProjDirEnum) - Method in interface nxopen.geometricutilities.PatternOrientation

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setFollowFaceToggle(boolean) - Method in interface nxopen.geometricutilities.PatternOrientation

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setFollowFillet(boolean) - Method in interface nxopen.blockstyler.SectionBuilder

License requirements: None.

setFollowFillet(boolean) - Method in interface nxopen.blockstyler.SuperSection

License requirements: None.

setFollowFoot(boolean) - Method in interface nxopen.features.HumanBuilder

License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setFollowNonVerticalWalls(boolean) - Method in interface nxopen.cam.VolumeBased25DMillingOperationBuilder

License requirements: None.

setFollowWallBottom(boolean) - Method in interface nxopen.cam.DmCmBuilder

License requirements: None.

setFont(EditSymbolDisplayBuilder.FontTypes) - Method in interface nxopen.annotations.EditSymbolDisplayBuilder

License requirements: drafting ("DRAFTING")
.

setFont(DisplayableObject.ObjectFont) - Method in interface nxopen.cae.xyplot.BaseLineStyleSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setFont(String) - Method in interface nxopen.cae.xyplot.TextStyleSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setFont(SectionLineStyleBuilder.FontStyle) - Method in interface nxopen.drawings.SectionLineStyleBuilder

Deprecated.

Deprecated in NX10.0.0. Use ViewSectionLineBuilder.lineColorFontWidth() instead.

setFont(String, ShipbuildingLinesViewStyle.Lines, Font) - Method in interface nxopen.drawings.ShipbuildingLinesViewStyle

The font type of ship line.

setFont(String, ShipDraftingViewLinesViewStyle.Lines, Font) - Method in interface nxopen.drawings.ShipDraftingViewLinesViewStyle

The font type of ship line.

setFont(Font) - Method in interface nxopen.drawings.ViewStyleFPCurvesBuilder

License requirements: drafting ("DRAFTING")
.

setFont(Font) - Method in interface nxopen.drawings.ViewStyleHiddenLinesBuilder

License requirements: drafting ("DRAFTING")
.

setFont(Font) - Method in interface nxopen.drawings.ViewStyleSmoothEdgesBuilder

License requirements: drafting ("DRAFTING")
.

setFont(Font) - Method in interface nxopen.drawings.ViewStyleVirtualIntersectionsBuilder

License requirements: drafting ("DRAFTING")
.

setFont(PartObject.LineFontType) - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setFont(PartDrafting.FontType) - Method in interface nxopen.preferences.PartDrafting

Sets the line font of the retained Annotation objects
License requirements: None.

setFont(String, ShipbuildingLinesViewPreferences.Lines, Font) - Method in interface nxopen.preferences.ShipbuildingLinesViewPreferences

The font type of ship line.

setFont(String, ShipDraftingViewLinesViewPreferences.Lines, Font) - Method in interface nxopen.preferences.ShipDraftingViewLinesViewPreferences

The font type of ship line.

setFont(Tag, int) - Method in interface nxopen.uf.UFObj

Refer to UF_OBJ_set_font for documentation.

setFontFace(String) - Method in interface nxopen.cam.WorkInstructionBuilder

License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.

setFontScaling(boolean) - Method in interface nxopen.cae.PostAnnotationPreference

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setFontSize(int) - Method in interface nxopen.cam.WorkInstructionBuilder

License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.

setFontStyle(VisualizationFonts.StyleType) - Method in interface nxopen.cae.xyplot.TextStyleSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setFontStyle(String) - Method in interface nxopen.display.TransientText

Sets the style of font to be used to display the transient text.

setFontStyle(TextBuilder.FontStyleOptions) - Method in interface nxopen.features.TextBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setFontType(Fonttype) - Method in interface nxopen.cae.xyplot.TextStyleSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setFontValue(String) - Method in interface nxopen.blockstyler.TextColorFontWidth

License requirements: None.

setFootDataSae(HumanData.SideType, String) - Method in interface nxopen.HumanPosturePredictionBuilder

Set the pedal Sae data of foot data, the steering wheel pedal type should be set as Sae
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setForce(double) - Method in interface nxopen.bodydes.OnestepUnformBuilder

License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setForceColor(NXColor) - Method in interface nxopen.cae.FreeBodyResultsBuilder

Force Color
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setForcedDirection(Direction) - Method in interface nxopen.features.SweptVolumeBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setForcedWelcomeMode(int) - Method in interface nxopen.preferences.SessionDrafting

License requirements: None.

setForceExponent(double) - Method in interface nxopen.motion.BodyContactAdams

Deprecated.

Deprecated in NX8.0.0. Obtion the exression using BodyContactAdams.forceExponentExpression() to query or edit it.

setForceExponent(double) - Method in interface nxopen.motion.BodyContactRecurdyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using BodyContactRecurdyn.forceExponentExpression() to query or edit it.

setForceExponent(double) - Method in interface nxopen.motion.CurveContactAdams

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using CurveContactAdams.forceExponentExpression() to query or edit it.

setForceExponent(double) - Method in interface nxopen.motion.CurveContactRecurdyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using CurveContactRecurdyn.forceExponentExpression() to query or edit it.

setForceFitDistance(boolean) - Method in interface nxopen.tooling.EjectorPostProcessingBuilder

License requirements: ug_mold_design ("UG MOLD")
.

setForceModel(BodyContactLms.ForceModelType) - Method in interface nxopen.motion.BodyContactLms

License requirements: None.

setForceModelType(BodyContactAdams.ForceModel) - Method in interface nxopen.motion.BodyContactAdams

License requirements: mechanisms ("MECHANISMS")
.

setForceModelType(BodyContactRecurdyn.ForceModel) - Method in interface nxopen.motion.BodyContactRecurdyn

License requirements: mechanisms ("MECHANISMS")
.

setForcePreload(double) - Method in interface nxopen.motion.JointFrictionAdams

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using Motion.JointFrictionAdams#forcePreloadExpression to query or edit it.

setForcePreload(double) - Method in interface nxopen.motion.JointFrictionRecurDyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using Motion.JointFrictionRecurDyn#forcePreloadExpression to query or edit it.

setForceRegenerate(boolean) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setForceStrength(double) - Method in interface nxopen.bodydes.OnestepUnformBuilder

License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal")
.

setForceUnlockFlag() - Method in interface nxopen.uf.UFUi

Refer to UF_UI_set_force_unlock_flag for documentation.

setForceVectorDisplay(FreeBodyResultsBuilder.VectorDisplay) - Method in interface nxopen.cae.FreeBodyResultsBuilder

Force vector display
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setForeground(boolean) - Method in interface nxopen.drawings.SectionViewStyle

Sets the status of foreground
License requirements: drafting ("DRAFTING")
.

setForeground(boolean) - Method in interface nxopen.drawings.ViewStyleSectionBuilder

License requirements: drafting ("DRAFTING")
.

setForeground(boolean) - Method in interface nxopen.preferences.SectionViewPreferences

Sets the status of foreground
License requirements: drafting ("DRAFTING")
.

setForegroundColor(int) - Method in interface nxopen.blockstyler.Node

License requirements: None.

setForegroundColor(double[]) - Method in interface nxopen.display.ImageBaseBuilder

Sets the foreground color (RGB value) of the image.

setForElecCam(boolean) - Method in interface nxopen.mechatronics.CamProfileBuilder

Deprecated.

Deprecated in NX10.0.0. Set the boolean using Mechatronics.CamProfileBuilder#setCheckingG2Continuity to query or edit it.

setForElecCam(boolean) - Method in interface nxopen.mechatronics.MotionProfileBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setForeOffset(BeamSectionOffsetOptions.Offset) - Method in interface nxopen.cae.BeamSectionOffsetOptions

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setForePlane(Plane) - Method in interface nxopen.features.shipdesign.ExpansionDrawingBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setForeshorteningSymbolMethodType(ForeshorteningSymbolSettingsBuilder.MethodType) - Method in interface nxopen.annotations.ForeshorteningSymbolSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setForeshorteningSymbolType(ForeshorteningSymbolSettingsBuilder.SymbolType) - Method in interface nxopen.annotations.ForeshorteningSymbolSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setForm(ChamferForm) - Method in interface nxopen.annotations.ChamferDimensionPreferences

Sets the form
License requirements: None.

setForm(HoleBossGeom.FormTypes, String) - Method in interface nxopen.cam.HoleBossGeom

The Form types.

setForm(SteelDistributionBuilder.SaForm) - Method in interface nxopen.features.shipdesign.SteelDistributionBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setForm(TagFormObject) - Method in interface nxopen.mechatronics.ReadWriteDeviceBuilder

Sets the form TagFormObject object.

setForm(TagFormObject) - Method in interface nxopen.mechatronics.TagTableBuilder

Sets the form TagFormObject object.

setForm(NXObject, String) - Method in interface nxopen.tooling.ReusablePocketBuilder

Sets form for hole series.

setFormabilityStrainType(LsdynaFormAnalysisResultDisplayBuilder.FormabilityStrainTypeName) - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setFormAndPitch(HoleBossGeom.FormPitchTypes) - Method in interface nxopen.cam.HoleBossGeom

License requirements: cam_base ("CAM BASE")
.

setFormat(TableCellStyleBuilder.FormatType) - Method in interface nxopen.annotations.TableCellStyleBuilder

Deprecated.

Deprecated in NX10.0.0. Use TableCellStyleBuilder.setCellFormatType(nxopen.annotations.TableCellStyleBuilder.CellFormatTypes) instead.

setFormat(Post.Format) - Method in interface nxopen.cae.PostAnnotationPreference

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setFormat(Post.Format) - Method in interface nxopen.cae.PostIdentifyPreference

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setFormat(Post.Format) - Method in interface nxopen.cae.PostLegendPreference

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setFormat(Post.Format) - Method in interface nxopen.cae.PostResultNavigatorPreference

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setFormat(ImageCaptureBuilder.ImageFormat) - Method in interface nxopen.gateway.ImageCaptureBuilder

License requirements: drafting ("DRAFTING")
.

setFormat(ModelingViewHighQualityImage.FormatType) - Method in interface nxopen.ModelingViewHighQualityImage

Sets the format to use for the generation of the High Quality Image.

setFormatMesh(boolean) - Method in interface nxopen.cae.MappedMeshBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setFormatOption(NodeElementInfoBuilder.FormatType) - Method in interface nxopen.cae.NodeElementInfoBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setFormatOption(TBSSmoothBuilder.Format[]) - Method in interface nxopen.cae.optimization.TBSSmoothBuilder

The output result format mutator
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setFormatType(String) - Method in interface nxopen.cae.SimLoadRecipeSource

License requirements: nx_masterfem ("Finite Element Modeling")
.

setFormatType(ElectricalFormat.Type) - Method in interface nxopen.routing.electrical.ElectricalFormat

Sets the type of ElectricalFormat
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Created in NX5.0.1

setFormboardFrameSizes(String[]) - Method in interface nxopen.preferences.RoutingElectrical

Sets a formboard frame size.

setFormboardSynchronizationLengthTolerance(double) - Method in interface nxopen.preferences.RoutingElectrical

Sets the default segment length tolerance to use for Formboard Synchronization.

setFormFaces(ScCollector) - Method in interface nxopen.features.sheetmetal.AeroUnformBuilder

License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setFormingAttributes(String, String, int) - Method in interface nxopen.die.DrawDiePunchSectionBuilder

Sets the forming faces attributes.

setFormingAttributes(String, String, int) - Method in interface nxopen.die.RotorSectionBuilder

Sets the forming faces attributes
License requirements: ug_die_design ("Die Design")
.

setFormingAttributes(String, String, int) - Method in interface nxopen.die.SteelInsertSectionBuilder

Sets the forming faces attributes
License requirements: ug_die_design ("Die Design")
.

setFormingColor(NXColor) - Method in interface nxopen.tooling.QuickQuotationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setFormingRegion(NXObject[]) - Method in interface nxopen.tooling.SpecialFormingBuilder

Set forming region.

setFormName(String) - Method in interface nxopen.cam.DrillThreadMillToolBuilder

License requirements: None.

setFormOption(EndHoleData.FormOptions) - Method in interface nxopen.geometricutilities.EndHoleData

License requirements: solid_modeling ("SOLIDS MODELING")
.

setFormStandard(ThreadFeatureGeometry.Form) - Method in interface nxopen.cam.fbm.ThreadFeatureGeometry

License requirements: cam_base ("CAM BASE")
.

setFormula(String) - Method in interface nxopen.blockstyler.AngularDimension

License requirements: None.

setFormula(String) - Method in interface nxopen.blockstyler.ExpressionBlock

License requirements: None.

setFormula(String) - Method in interface nxopen.blockstyler.LinearDimension

License requirements: None.

setFormula(String) - Method in interface nxopen.blockstyler.OnPathDimension

License requirements: None.

setFormula(String) - Method in interface nxopen.blockstyler.RadiusDimension

License requirements: None.

setFormula(String) - Method in interface nxopen.cae.ResultProbeBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setFormula(String) - Method in interface nxopen.cae.ResultsCombinationBuilder

The formula
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setFormula(String) - Method in interface nxopen.cae.ResultsReductionBuilder

The formula
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setFormula(String) - Method in interface nxopen.cae.TransientResultsReductionBuilder

The formula
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setFormula(int, int, SpreadsheetCellData, int) - Method in interface nxopen.Spreadsheet

Stores a formula into a cell.

setFormula(String) - Method in interface nxopen.validate.RequirementBuilder

License requirements: None.

setFormula(String) - Method in interface nxopen.validate.RequirementCheck

Sets the formula of requirement check.

setFormulaComment(String) - Method in interface nxopen.mechatronics.AdapterFormulaBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setFormulaComment(String) - Method in interface nxopen.mechatronics.ExpressionBlockFormulaBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setFormulaName(String) - Method in interface nxopen.mechatronics.RuntimeFormulaBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setFormulaString(String) - Method in interface nxopen.mechatronics.RuntimeFormulaBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setFormulation(RSEvent.DdamFormulationType) - Method in interface nxopen.cae.responsesimulation.RSEventAttributes

License requirements: nx_response_anlys ("NX Response Analysis")
.

setFormulaValue(String) - Method in interface nxopen.SpreadsheetCellData

License requirements: None.

setFormUserDefined(String) - Method in interface nxopen.cam.fbm.ThreadFeatureGeometry

Set the user defined form standard
License requirements: cam_base ("CAM BASE")
.

setForwardExtension(Expression) - Method in interface nxopen.mechanicalrouting.PathTransitionBuilder

License requirements: routing_base ("Routing Basic")
.

setForwardExtension(double) - Method in interface nxopen.routing.IAxisPort

Sets the forward extension value of a port, i.e. the minimum length that a segment must remain straight coming out of a Port
License requirements: routing_base ("Routing Basic")

Created in NX4.0.0

setForwardExtensionObject(Expression) - Method in interface nxopen.routing.IAxisPort

Sets the forward extension object of a port, i.e. an expression representing the minimum length that a segment must remain straight coming out of a Port
License requirements: routing_base ("Routing Basic")

Created in NX4.0.0

setForwardPerpendicular(boolean) - Method in interface nxopen.annotations.BaseFrameBarBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setForwardPerpendicularLabelColor(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setForwardPerpendicularLabelFont(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setForwardPerpendicularLabelItalicized(boolean) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setForwardPerpendicularLabelWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setForwardPerpendicularTicColor(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setForwardPerpendicularTicDisplay(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setForwardPerpendicularTicFont(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setForwardPerpendicularTicLength(double) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setForwardPerpendicularTicWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setFourthMargin(NXObject) - Method in interface nxopen.tooling.AutoDimensionBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setFpPrefs(UFSmd.FpPrefs) - Method in interface nxopen.uf.UFSmd

Refer to UF_SMD_set_fp_prefs for documentation.

setFractionalDisplay(boolean) - Method in interface nxopen.annotations.UnitsFormatPreferences

License requirements: None.

setFractionalDisplay(boolean) - Method in interface nxopen.annotations.UnitsStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setFramebarHorizontal(boolean) - Method in interface nxopen.drawings.GeneralViewStyle

The status of framebar horizontal, if true automatically creates horizontal framebar for views where the view axis match with ship axis.

setFramebarHorizontal(boolean) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder

License requirements: drafting ("DRAFTING")
.

setFramebarHorizontal(boolean) - Method in interface nxopen.preferences.GeneralViewPreferences

Sets the status of horizontal framebar.

setFrameBarPrecision(int) - Method in interface nxopen.preferences.PartDrafting

Sets the frame bar precision.

setFramebarPreferences(FrameBarPreferences) - Method in interface nxopen.annotations.BaseFrameBar

Sets the symbol preferences for the annotation
License requirements: nx_ship_drafting ("Ship Drafting")
.

setFrameBarPreferences(FrameBarPreferences) - Method in interface nxopen.preferences.AnnotationPreferences

Sets the global frame bar preferences for the part
License requirements: nx_ship_drafting ("Ship Drafting")
.

setFrameBarTicDirection(int) - Method in interface nxopen.preferences.PartDrafting

Sets the frame bar tic direction.

setFramebarVertical(boolean) - Method in interface nxopen.drawings.GeneralViewStyle

The status of framebar vertical, if true automatically creates vertical framebar for views where the view axis match with ship axis.

setFramebarVertical(boolean) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder

License requirements: drafting ("DRAFTING")
.

setFramebarVertical(boolean) - Method in interface nxopen.preferences.GeneralViewPreferences

Sets the status of vertical framebar.

setFrameData(FcfFrameData) - Method in interface nxopen.annotations.FcfData

Sets the FCF frames data.

setFrameName(String) - Method in interface nxopen.features.shipdesign.BulkHeadListItemBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setFrameName(String) - Method in interface nxopen.routing.FormboardFrame

Sets the name of the formboard frame
License requirements: routing_harness ("Routing Harness")
.

setFrameOnlyToggle(boolean) - Method in interface nxopen.geometricutilities.PatternDefinition

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setFrameParts(int) - Method in interface nxopen.features.shipdesign.MaterialEstimationBuilder

Sets the selected frame parts.

setFrameParts(String[]) - Method in interface nxopen.features.shipdesign.SelectPartBuilder

Set frame part names.

setFrameParts(String[]) - Method in interface nxopen.features.shipdesign.TransitionBuilder

Set frame part names.

setFrameParts(int) - Method in interface nxopen.features.shipdesign.WeightAndCGBuilder

Sets the selected frame parts.

setFrames(FcfFrame[]) - Method in interface nxopen.annotations.FcfFrameData

Deprecated.

Deprecated in NX10.0.0. Use FeatureControlFrameBuilder.featureControlFrameDataList() instead.

setFramesPerSecond(int) - Method in interface nxopen.MovieSettingsBuilder

License requirements: None.

setFrameStyle(FeatureControlFrameBuilder.FcfFrameStyle) - Method in interface nxopen.annotations.FeatureControlFrameBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setFrameStyleType(SearchCriteriaFeatureControlFrameBuilder.FrameStyleOptions) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

License requirements: None.

setFrameType(PackagingInterferenceBuilder.Frame) - Method in interface nxopen.motion.PackagingInterferenceBuilder

Sets the PackagingInterference frame type defined at PackagingInterferenceBuilder.Frame
License requirements: mechanisms ("MECHANISMS")

Created in NX4.0.0

setFrameType(PackagingTraceBuilder.Frame) - Method in interface nxopen.motion.PackagingTraceBuilder

Sets the PackagingTrace reference frame type defined at PackagingTraceBuilder.Frame
License requirements: mechanisms ("MECHANISMS")

Created in NX4.0.0

setFrecAtTimeStamp(Feature) - Method in interface nxopen.features.CompositeCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setFrecAtTimeStamp(Feature) - Method in interface nxopen.features.ExtractFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setFrecAtTimeStamp(Feature) - Method in interface nxopen.features.MirrorBodyBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setFrecAtTimeStamp(Feature) - Method in interface nxopen.features.WavePointBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setFree2DOption(boolean) - Method in interface nxopen.features.FreeTransformerBuilder

License requirements: None.

setFree2DPlane(Plane) - Method in interface nxopen.features.FreeTransformerBuilder

License requirements: None.

setFreeEdgeDisplayStyle(ElementEdgeCheckBuilder.EdgeDisplayStyle) - Method in interface nxopen.cae.modelcheck.ElementEdgeCheckBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setFreeFaceIndicator(boolean) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setFreeFaceIndicator(boolean) - Method in interface nxopen.cae.DurabilityResultsReportBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setFreeFormConstructionResult(SessionModeling.FreeFormConstructionResultType) - Method in interface nxopen.preferences.SessionModeling

Sets the free form construction result.

setFreeFormResult(int) - Method in interface nxopen.uf.UFModlFeatures

Refer to UF_MODL_set_free_form_result for documentation.

setFreeLength(double) - Method in interface nxopen.motion.SpringBuilder

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using Motion.SpringBuilder#freeLengthExpression or Motion.SpringBuilder#freeLengthExpression to query or edit it.

setFreePoints(Point3d[]) - Method in interface nxopen.cae.PostGraphBuilder

Set free points for extracting data
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setFreePoints(Point3d[]) - Method in interface nxopen.cae.PostGraphOrbitBuilder

Set free points for extracting data
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setFreeState(boolean) - Method in interface nxopen.annotations.DatumReferenceBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setFreeState(boolean) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setFreeStateType(SearchCriteriaFeatureControlFrameBuilder.FreeStateOptions) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

License requirements: None.

setFreezeOption(boolean) - Method in interface nxopen.cae.AssyFEModel

Sets freeze option
License requirements: nx_masterfem ("Finite Element Modeling")
.

setFrenetSubtype(PlaneTypes.FrenetSubtype) - Method in interface nxopen.IPlane

Sets subtype for a specific plane type where the alternate solution cannot handle.

setFreqTargetActive(int, boolean) - Method in interface nxopen.cae.ModelUpdateSolution

Sets active status for a specific frequency target
License requirements: nx_correl_update ("FE Model Update")
.

setFreqTargetWeight(int, double) - Method in interface nxopen.cae.ModelUpdateSolution

Sets weight for a specific frequency target
License requirements: nx_correl_update ("FE Model Update")
.

setFrequencies(double) - Method in interface nxopen.cae.ModelUpdateOverallWeightsBuilder

License requirements: nx_correl_update ("FE Model Update")
.

setFrequencies(double[]) - Method in interface nxopen.cae.responsesimulation.FrequencyDefinition

Sets the frequency values to perform FRF evaluation.

setFrequency(double) - Method in interface nxopen.motion.DriverOperation

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using DriverOperation.frequencyExpression() to query or edit it.

setFrequencyTolerance(double) - Method in interface nxopen.cae.CorrelModePairingBuilder

License requirements: nx_correl_base ("FE Correlation")
.

setFrfDampingSource(CorrelSolutionBuilder.EnumDampingFrftype) - Method in interface nxopen.cae.CorrelSolutionBuilder

License requirements: nx_correl_base ("FE Correlation")
.

setFriction(double) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setFrictionArm(double) - Method in interface nxopen.motion.JointFrictionAdams

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using Motion.JointFrictionAdams#frictionArmExpression to query or edit it.

setFrictionArm(double) - Method in interface nxopen.motion.JointFrictionRecurDyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using Motion.JointFrictionRecurDyn#frictionArmExpression to query or edit it.

setFrictionFunction(MotionFunction) - Method in interface nxopen.motion.TirePropertyAdvancedParameters

License requirements: mechanisms ("MECHANISMS")
.

setFrictionSurfaceFile(String) - Method in interface nxopen.motion.TirePropertyAdvancedParameters

License requirements: mechanisms ("MECHANISMS")
.

setFrictionVelocity(double) - Method in interface nxopen.motion.BodyContactAdams

Deprecated.

Deprecated in NX8.0.0. Obtion the exression using BodyContactAdams.frictionVelocityExpression() to query or edit it.

setFrictionVelocity(double) - Method in interface nxopen.motion.BodyContactRecurdyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using BodyContactRecurdyn.frictionVelocityExpression() to query or edit it.

setFrom(BladeCutStart.Type) - Method in interface nxopen.cam.BladeCutStart

License requirements: cam_base ("CAM BASE")
.

setFrom(ISurface) - Method in interface nxopen.features.sheetmetal.NormalCutoutBuilder

Sets the face or datum plane from which the cutout begins.

setFromCsys(CoordinateSystem) - Method in interface nxopen.features.sheetmetal.SolidPunchBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal") OR sheet_metal_design ("SHEET METAL DESIGN")
.

setFromCsys(CoordinateSystem) - Method in interface nxopen.geometricutilities.ModlMotion

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setFromCSYS(CoordinateSystem) - Method in interface nxopen.geometricutilities.PatternOrientation

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setFromFunction(Excitation, Excitation.Component) - Method in interface nxopen.cae.responsesimulation.CSDExcitationBuilder

Sets the from function
License requirements: nx_response_anlys ("NX Response Analysis")
.

setFromLocationCsys3d(CoordinateSystem) - Method in interface nxopen.geometricutilities.GeneralPattern

License requirements: None.

setFromLocationPoint(Point) - Method in interface nxopen.geometricutilities.GeneralPattern

License requirements: None.

setFromLocationType(GeneralPattern.FromLocationOptions) - Method in interface nxopen.geometricutilities.GeneralPattern

License requirements: solid_modeling ("SOLIDS MODELING")
.

setFromPoint(Point) - Method in interface nxopen.cam.TurnAvoidanceFromBuilder

License requirements: cam_base ("CAM BASE")
.

setFromPoint(NXObject) - Method in interface nxopen.cam.WedmBasedGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setFromPoint(Point) - Method in interface nxopen.features.MoveFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setFromPoint(Point) - Method in interface nxopen.formboard.OrientBranchBuilder

Deprecated.

Deprecated in NX8.5.0. This OrientBranchBuilder.BranchAngleMethod.TWO_POINTS is no longer supported.

setFromPoint(Point) - Method in interface nxopen.geometricutilities.ModlMotion

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setFromPoint(Point) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setFromPointMode(TurnAvoidanceFromBuilder.FromPointModes) - Method in interface nxopen.cam.TurnAvoidanceFromBuilder

License requirements: cam_base ("CAM BASE")
.

setFromPointStatus(int) - Method in interface nxopen.cam.WedmBasedGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setFromPointToolAxis(NXObject) - Method in interface nxopen.cam.WedmBasedGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setFromStation(StripLayoutBuilder.FromStationType) - Method in interface nxopen.tooling.StripLayoutBuilder

License requirements: None.

setFromTerminal(LogicalTerminal) - Method in interface nxopen.routing.electrical.Connection

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setFromVector(Direction) - Method in interface nxopen.features.MoveFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setFromVector(Direction) - Method in interface nxopen.formboard.OrientBranchBuilder

Deprecated.

Deprecated in NX8.5.0. This builder attribute is no longer required.

setFromVector(Direction) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setFromView(View) - Method in interface nxopen.drawings.ViewProjectionBuilder

License requirements: nx_layout ("NX Layout")
.

setFrontClip(boolean) - Method in interface nxopen.drawings.ViewStylePerspectiveBuilder

License requirements: drafting ("DRAFTING")
.

setFrontClipDistance(double) - Method in interface nxopen.drawings.ViewStylePerspectiveBuilder

License requirements: drafting ("DRAFTING")
.

setFrontClipping(boolean) - Method in interface nxopen.drawings.PerspectiveViewStyle

Sets the status of front clipping
License requirements: drafting ("DRAFTING")
.

setFrontClippingDistance(double) - Method in interface nxopen.display.CameraBuilder

License requirements: None.

setFrontClippingDistance(double) - Method in interface nxopen.drawings.PerspectiveViewStyle

Sets the value of front clipping distance
License requirements: drafting ("DRAFTING")
.

setFrontCrossPosition(CrashBarrierBuilder.CrossPositionType) - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setFrontHeaderFeature(HeadImpactFrontHeader) - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setFrontLoading(String) - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setFrontLoading(String) - Method in interface nxopen.features.vehicledesign.SlopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setFrontLoading(String) - Method in interface nxopen.features.vehicledesign.StaticCurbBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setFrontOverhang(double) - Method in interface nxopen.features.vehicledesign.BaseDataBuilder

Deprecated.

Deprecated in NX9.0.1. Obtain the expression using BaseDataBuilder.frontOverhangExp() to query or edit it.

setFrontOverlapSide(CrashBarrierBuilder.OverlapSideType) - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setFrontPositionObject(CrashBarrierBuilder.PositionObjectType) - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setFrontProximity(double) - Method in interface nxopen.features.shipdesign.SectionViewBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setFrontShape(CrashBarrierBuilder.ShapeType) - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setFrontSurfacePlane(WheelCoveringBuilder.SurfacePlaneType) - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setFrontSurfaceSection(WheelCoveringBuilder.SurfaceSectionType) - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setFrontUserDefineWidth(boolean) - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setFrontView(boolean) - Method in interface nxopen.drawings.ViewCreationWizardBuilder

License requirements: drafting ("DRAFTING")
.

setFrozenColor(NXColor) - Method in interface nxopen.features.subdivision.DefineWorkRegionBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setFrozenLevel(Tag, int) - Method in interface nxopen.uf.UFPlist

Deprecated.

The equivalent Open C method has retired

setFrozenRegionDefinitionMethod(DefineWorkRegionBuilder.FrozenRegionDefinitionMethods) - Method in interface nxopen.features.subdivision.DefineWorkRegionBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setFtireFile(String) - Method in interface nxopen.motion.TirePropertyFtBuilder

License requirements: mechanisms ("MECHANISMS")
.

setFullCircle(boolean) - Method in interface nxopen.annotations.CircleCenterlineBuilder

License requirements: drafting ("DRAFTING")
.

setFullCircle(boolean) - Method in interface nxopen.geometricutilities.CurveLimitsData

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setFullnessPoint(Point) - Method in interface nxopen.features.FillHoleBuilder

License requirements: nx_freeform_1 ("basic freeform modeling"), solid_modeling ("SOLIDS MODELING")
.

setFullSceneAntialiasing(boolean) - Method in interface nxopen.preferences.SessionVisualizationVisual

Sets the scene antialiasing flag.

setFullyDefinedColor(int) - Method in interface nxopen.preferences.PartSketch

Sets the sketch fully defined constraint color
License requirements: None.

setFunction(TaggedObject) - Method in interface nxopen.cae.DurabilityFunctionExcitationBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setFunction(TaggedObject) - Method in interface nxopen.cae.LaminateRandomEventBuilder

Deprecated.

Deprecated in NX10.0.0. Use LaminateDynamicEventBuilder.setUserFunction(nxopen.TaggedObject) instead.

setFunction(Function) - Method in interface nxopen.cae.responsesimulation.FunctionComponentData

License requirements: nx_response_anlys ("NX Response Analysis")
.

setFunction(String) - Method in interface nxopen.geometricutilities.LawBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setFunction(NXObject) - Method in interface nxopen.motion.DriverOperation

License requirements: mechanisms ("MECHANISMS")
.

setFunction(MotionFunction) - Method in interface nxopen.motion.ExpressionFunctionBuilder

License requirements: mechanisms ("MECHANISMS")
.

setFunction(Function) - Method in interface nxopen.motion.PlantOutputBuilder

License requirements: nx_motion_cosim ("NX Motion CoSimulation")
.

setFunction(Function) - Method in interface nxopen.motion.ScalarForceBuilder

License requirements: mechanisms ("MECHANISMS")
.

setFunction(Function) - Method in interface nxopen.motion.ScalarTorqueBuilder

License requirements: mechanisms ("MECHANISMS")
.

setFunction(Tag, UFMotion.Function) - Method in interface nxopen.uf.UFMotion

Refer to UF_MOTION_set_function for documentation.

setFunctionData(TaggedObject, int, double, double) - Method in interface nxopen.cae.DurabilityDamageEvaluationBuilder

Sets the function data.

setFunctionDataType(XyFunctionDataType) - Method in interface nxopen.cae.AfuData

Sets the data type of the AFU Data Record
License requirements: nx_ftk ("NX Advanced Graphing")
.

setFunctionItemRevisionId(String) - Method in interface nxopen.mechatronics.FunctionObjectBuilder

Deprecated.

Deprecated in NX8.5.0. Please use ObjectInformationBuilder instead.

setFunctionLibrary(Tag, String) - Method in interface nxopen.uf.UFRule

Deprecated.

The equivalent Open C method has retired

setFunctionName(String) - Method in interface nxopen.report.ProgramInformation

License requirements: None.

setFunctionName(Tag, String) - Method in interface nxopen.uf.UFRule

Deprecated.

The equivalent Open C method has retired

setFunctionOptionSet(String) - Method in interface nxopen.mechatronics.FunctionObjectBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setFunctionType(String) - Method in interface nxopen.routing.AttributeHolder

Sets the function type for which Template Attributes to be applied
License requirements: routing_base ("Routing Basic")
.

setG0(boolean) - Method in interface nxopen.features.EdgeSymmetryBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setG0(boolean) - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder

License requirements: gateway ("UG GATEWAY")
.

setG0Check(boolean) - Method in interface nxopen.geometricanalysis.CurveContinuityBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setG0Continuity(boolean) - Method in interface nxopen.features.MatchEdgeBuilder

License requirements: features_modeling ("FEATURES MODELING")
.

setG0Tolerance(double) - Method in interface nxopen.features.BridgeSurfaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setG0Tolerance(double) - Method in interface nxopen.features.SectionSurfaceBuilderEx

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setG0Tolerance(double) - Method in interface nxopen.features.StyledCornerBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setG0Tolerance(double) - Method in interface nxopen.features.StyledSweepBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setG0Tolerance(double) - Method in interface nxopen.features.SweptBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setG0Tolerance(double) - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder

License requirements: gateway ("UG GATEWAY")
.

setG1(boolean) - Method in interface nxopen.features.EdgeSymmetryBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setG1(boolean) - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder

License requirements: gateway ("UG GATEWAY")
.

setG1Check(boolean) - Method in interface nxopen.geometricanalysis.CurveContinuityBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setG1Continuity(boolean) - Method in interface nxopen.features.MatchEdgeBuilder

License requirements: features_modeling ("FEATURES MODELING")
.

setG1Tolerance(double) - Method in interface nxopen.features.BridgeSurfaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setG1Tolerance(double) - Method in interface nxopen.features.SectionSurfaceBuilderEx

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setG1Tolerance(double) - Method in interface nxopen.features.StyledCornerBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setG1Tolerance(double) - Method in interface nxopen.features.StyledSweepBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setG1Tolerance(double) - Method in interface nxopen.features.SweptBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setG1Tolerance(double) - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder

License requirements: gateway ("UG GATEWAY")
.

setG2(boolean) - Method in interface nxopen.features.EdgeSymmetryBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setG2(boolean) - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder

License requirements: gateway ("UG GATEWAY")
.

setG2Check(boolean) - Method in interface nxopen.geometricanalysis.CurveContinuityBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setG2Continuity(boolean) - Method in interface nxopen.features.MatchEdgeBuilder

License requirements: features_modeling ("FEATURES MODELING")
.

setG2Tolerance(double) - Method in interface nxopen.features.BridgeSurfaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setG2Tolerance(double) - Method in interface nxopen.features.SectionSurfaceBuilderEx

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setG2Tolerance(double) - Method in interface nxopen.features.StyledCornerBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setG2Tolerance(double) - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder

License requirements: gateway ("UG GATEWAY")
.

setG3(boolean) - Method in interface nxopen.features.EdgeSymmetryBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setG3(boolean) - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder

License requirements: gateway ("UG GATEWAY")
.

setG3Check(boolean) - Method in interface nxopen.geometricanalysis.CurveContinuityBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setG3Continuity(boolean) - Method in interface nxopen.features.MatchEdgeBuilder

License requirements: features_modeling ("FEATURES MODELING")
.

setG3Tolerance(double) - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder

License requirements: gateway ("UG GATEWAY")
.

setGageConstruction(DurabilityStrainGageAnalyzerBuilder.GageConstructionEnum) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setGagePoissonRatio(double) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setGageSource(DurabilityStrainGageAnalyzerBuilder.GageSourceEnum) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setGageType(DurabilityStrainGageAnalyzerBuilder.GageTypeEnum) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setGageType(StrainGageType) - Method in interface nxopen.cae.responsesimulation.StrainGageBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setGaOptNumGenerations(int) - Method in interface nxopen.cae.ModelUpdateOptimOptionsBuilder

License requirements: nx_correl_update ("FE Model Update")
.

setGaOptNumGenes(int) - Method in interface nxopen.cae.ModelUpdateOptimOptionsBuilder

License requirements: nx_correl_update ("FE Model Update")
.

setGaOptNumIndividuals(int) - Method in interface nxopen.cae.ModelUpdateOptimOptionsBuilder

License requirements: nx_correl_update ("FE Model Update")
.

setGap(double) - Method in interface nxopen.annotations.CenterlineSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setGap(double) - Method in interface nxopen.annotations.OffsetCenterPointBuilder

License requirements: drafting ("DRAFTING")
.

setGap(double) - Method in interface nxopen.drawings.DrawingRegionBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setGap(double) - Method in interface nxopen.drawings.ViewSectionLineBuilder

License requirements: drafting ("DRAFTING")
.

setGapFirst(double) - Method in interface nxopen.tooling.DieBaseBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setGapLock(boolean) - Method in interface nxopen.routing.OverstockBuilder

License requirements: routing_advanced ("Routing Advanced") OR routing_harness ("Routing Harness") OR routing_cabling ("Routing Cabling") OR routing_pipetube ("Routing Piping and Tubing") OR routing_hvac ("Routing HVAC") OR routing_platform ("Routing Platform") OR routing_pid ("Routing PID")
.

setGapOption(boolean) - Method in interface nxopen.features.ProjectCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setGapSecond(double) - Method in interface nxopen.tooling.DieBaseBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setGapSize(double) - Method in interface nxopen.drawings.TraceLinesViewStyle

Sets the gap size
License requirements: drafting ("DRAFTING")
.

setGapSize(double) - Method in interface nxopen.drawings.ViewStyleTraceLinesBuilder

License requirements: drafting ("DRAFTING")
.

setGapSize(double) - Method in interface nxopen.preferences.TraceLinesViewPreferences

Sets the gap size.

setGapThicknessState(ShellEADBuilder.State) - Method in interface nxopen.cae.ShellEADBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setGapTolerance(double) - Method in interface nxopen.cae.ContactMeshBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setGapTolerance(String) - Method in interface nxopen.features.sheetmetal.MigratedPanelBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setGauge(double) - Method in interface nxopen.routing.electrical.ElectricalStockDefinition

Sets the gauge of stock
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setGdt(GdtOption) - Method in interface nxopen.drawings.ViewStyleInheritPmiBuilder

License requirements: drafting ("DRAFTING")
.

setGdt(boolean) - Method in interface nxopen.drawings.ViewStyleProjectedBuilder

License requirements: drafting ("DRAFTING")
.

setGdtFrameHeightFactor(double) - Method in interface nxopen.annotations.LetteringPreferences

Sets the gdt frame height factor
License requirements: None.

setGdtFrameHeightFactor(double) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setGdtSymbolCfw(LineCfw) - Method in interface nxopen.annotations.SymbolPreferences

Sets the gdt symbol color, font, and width
License requirements: None.

setGdtSymbolColor(NXColor) - Method in interface nxopen.annotations.SymbolStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setGdtSymbolFont(DisplayableObject.ObjectFont) - Method in interface nxopen.annotations.SymbolStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setGdtSymbolWidth(LineWidth) - Method in interface nxopen.annotations.SymbolStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setGender(HumanData.GenderType) - Method in interface nxopen.features.HumanBuilder

Sets human gender data
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setGeneralBushing(Tag, UFMotion.GeneralBushing) - Method in interface nxopen.uf.UFMotion

Refer to UF_MOTION_set_general_bushing for documentation.

setGeneralColor(NXColor) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setGeneralDrawingPlane(Plane) - Method in interface nxopen.features.GeneralConicBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setGeneralHoleForm(HolePackageBuilder.HoleForms) - Method in interface nxopen.features.HolePackageBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setGeneralName(String) - Method in interface nxopen.FeatureGeneralPropertiesBuilder

License requirements: None.

setGeneralNxTextCharacterSpaceFactor(double) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setGeneralObject(NXObject) - Method in interface nxopen.FeatureGeneralPropertiesBuilder

License requirements: None.

setGeneralOrientationOption(PatternOrientation.Enum) - Method in interface nxopen.geometricutilities.PatternOrientation

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setGeneralPrefs(UFSmd.GenPrefs) - Method in interface nxopen.uf.UFSmd

Refer to UF_SMD_set_general_prefs for documentation.

setGeneralStandardTextCharacterSpaceFactor(double) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setGeneralText(Lettering) - Method in interface nxopen.annotations.LetteringPreferences

Sets the general text
License requirements: None.

setGeneralTextAspectRatio(double) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setGeneralTextCharSpaceFactor(double) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setGeneralTextColor(NXColor) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setGeneralTextFont(int) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setGeneralTextItalicized(boolean) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setGeneralTextLineSpaceFactor(double) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setGeneralTextLineWidth(LineWidth) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setGeneralTextSize(double) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setGeneralTextSymbolAspectRatio(double) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setGeneralValue(double) - Method in interface nxopen.cae.AfuZHeaderInfo

Sets the value of general field
License requirements: nx_ftk ("NX Advanced Graphing")
.

setGenerateCheckFlag(boolean) - Method in interface nxopen.validate.ValidatorOptions

License requirements: None.

setGenerateHeightCurve(boolean) - Method in interface nxopen.die.DrawBeadBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setGenerateHqiShadows(boolean) - Method in interface nxopen.display.Shadows

License requirements: None.

setGenerateLogFile(boolean) - Method in interface nxopen.validate.ValidatorOptions

License requirements: None.

setGenerateMaximumContributors(boolean) - Method in interface nxopen.cae.responsesimulation.FrequencyDefinition

License requirements: nx_response_anlys ("NX Response Analysis")
.

setGenerateMethod(WorkpieceBuilder.MethodType) - Method in interface nxopen.tooling.WorkpieceBuilder

License requirements: None.

setGenerateMissingPartFamilyMembers(boolean) - Method in interface nxopen.LoadOptions

Sets the option that controls whether to automatically regenerate missing part family members when it loads the parent assembly
License requirements: None.

setGenerateOneModel(boolean) - Method in interface nxopen.VRMLImporter

Sets the Generate One Model flag.

setGenerateOptimizeToggle(boolean) - Method in interface nxopen.tooling.DieEngStampingCarryoverBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setGenerateOriginalToggle(boolean) - Method in interface nxopen.tooling.DieEngStampingCarryoverBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setGenerateOutline(boolean) - Method in interface nxopen.tooling.DieEngDieTipBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setGeneratePaths(boolean) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setGenerateType(GeneralInsertBuilder.GenerateMethod) - Method in interface nxopen.tooling.GeneralInsertBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setGenerateValidationLogFile(boolean) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setGenerateWeightData(boolean) - Method in interface nxopen.PartSaveOptions

Sets the option indicating whether the weight and other mass properties of a part will be updated and saved when the part is saved
License requirements: None.

setGenerationFullRegeneration(boolean) - Method in interface nxopen.cam.Preferences

Deprecated.

Deprecated in NX10.0.3. Use CAM.Preferences#generationSmartRegeneration instead.

setGenerationPauseAfterEachPath(boolean) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setGenerationRefreshBeforeEachPath(boolean) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setGenerationSmartRegeneration(boolean) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setGenerationUpdateInstances(boolean) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setGenericResultType(BaseResultType) - Method in interface nxopen.cae.CrossSectionParameters

Set Result type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setGenericResultType(BaseResultType) - Method in interface nxopen.cae.ResultParameters

Set Result type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setGenericType(BaseResultType) - Method in interface nxopen.cae.DeformationParameters

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setGeoFileName(String) - Method in interface nxopen.linedesigner.ImportFactoryCadGeoBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setGeomDisplayFreeEdges(boolean) - Method in interface nxopen.cae.ModelDisplayBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setGeomDisplayStitchedEdges(boolean) - Method in interface nxopen.cae.ModelDisplayBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setGeometricCharacteristic(GeometricCharacteristic) - Method in interface nxopen.annotations.FcfFrameData

Deprecated.

Deprecated in NX10.0.0. Use FeatureControlFrameBuilder.characteristic() and FeatureControlFrameBuilder.setCharacteristic(nxopen.annotations.FeatureControlFrameBuilder.FcfCharacteristic) instead.

setGeometricDefinition(Tag, UFGdt.GeometricDefinition) - Method in interface nxopen.uf.UFGdt

Refer to UF_GDT_set_geometric_definition for documentation.

setGeometries(NXObject[]) - Method in interface nxopen.sim.KinematicComponentBuilder

Sets geometry elements for the component
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setGeometry(DisplayableObject[]) - Method in interface nxopen.annotations.MasterCustomSymbolData

Deprecated.

Deprecated in NX9.0.0. Use MasterSymbolBuilder instead.

setGeometry(DisplayableObject[]) - Method in interface nxopen.cae.optimization.DAOConstraintBuilder

Sets the target geometry
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setGeometry(DisplayableObject[]) - Method in interface nxopen.cae.optimization.DAOObjective

Sets the target geometry
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setGeometry(Section) - Method in interface nxopen.cam.FollowCurveMoveBuilder

License requirements: cam_base ("CAM BASE")
.

setGeometry(DisplayableObject) - Method in interface nxopen.DatumConstraint

Sets
License requirements: solid_modeling ("SOLIDS MODELING")
.

setGeometry(NXObject[]) - Method in interface nxopen.IPlane

Sets the geometry
License requirements: None.

setGeometry(NXObject[]) - Method in interface nxopen.mechatronics.CollisionBodyBuilder

Sets the geometry
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setGeometry(NXObject[]) - Method in interface nxopen.mechatronics.CollisionSensorBuilder

Sets the geometries.

setGeometry(NXObject[]) - Method in interface nxopen.mechatronics.RigidBodyBuilder

Sets the geometry
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setGeometryAndConstraints(DisplayableObject, DatumAxisBuilder.ConstraintType, int, double, String, DisplayableObject, DatumAxisBuilder.ConstraintType, int, double, String, Sense) - Method in interface nxopen.features.DatumAxisBuilder

Sets two different geometric objects.

setGeometryAndConstraints(DisplayableObject, DatumPlaneBuilder.ConstraintType, int, double, String, DisplayableObject, DatumPlaneBuilder.ConstraintType, int, double, String) - Method in interface nxopen.features.DatumPlaneBuilder

Sets two different geometric objects.

setGeometryAverageValue(ResultProbeBuilder.GeometryValue) - Method in interface nxopen.cae.ResultProbeBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setGeometryAxisX(String) - Method in interface nxopen.sim.KinematicChannelBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setGeometryAxisY(String) - Method in interface nxopen.sim.KinematicChannelBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setGeometryAxisZ(String) - Method in interface nxopen.sim.KinematicChannelBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setGeometryCombinationValue(PostGraphBuilder.GeometryValue) - Method in interface nxopen.cae.PostGraphBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setGeometryData(FemPart.UseBodiesOption, Body[], FemSynchronizeOptions) - Method in interface nxopen.cae.FemPart

Sets the geometry data associated with the fem part
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setGeometryGroup(InspectionGroup) - Method in interface nxopen.cam.InspectionCreatePathsBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setGeometryGroup(NCGroup) - Method in interface nxopen.cam.MirrorBuilder

License requirements: cam_base ("CAM BASE")
.

setGeometryHighlight(boolean) - Method in interface nxopen.mechatronics.PreferencesBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setGeometryLocation(String) - Method in interface nxopen.cam.FeatureProcessBuilder

Returns the name of the geometry location of the generated feature processes
License requirements: ug_holemaking ("UG Holemaking")
.

setGeometryLocation(String) - Method in interface nxopen.cam.GroupFeatures

License requirements: cam_base ("CAM BASE")
.

setGeometryOptions(FemCreationOptions.UseBodiesOption, Body[], FemSynchronizeOptions) - Method in interface nxopen.cae.FemCreationOptions

Set CAE geometry options
License requirements: None.

setGeometryPreference(BaseCustomSymbolBuilder.GeometryPreferences) - Method in interface nxopen.annotations.BaseCustomSymbolBuilder

License requirements: drafting ("DRAFTING")
.

setGeometrySearchType(FeatureRecognitionBuilder.GeometrySearch) - Method in interface nxopen.cam.FeatureRecognitionBuilder

License requirements: None.

setGeometrySelection(TaggedObject, TaggedObject[]) - Method in interface nxopen.cae.ManualMorphBuilder

Sets the the geometry selected for manual map
License requirements: nx_masterfem ("Finite Element Modeling")
.

setGeometryTemplate(String) - Method in interface nxopen.drafting.PrimaryContentItemBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setGeometryType(Geometry) - Method in interface nxopen.cae.optimization.DAOConstraintBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setGeometryType(Geometry) - Method in interface nxopen.cae.optimization.DAOObjective

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setGeometryType(ProbeCalibrateSphereMoveBuilder.Geometry) - Method in interface nxopen.cam.ProbeCalibrateSphereMoveBuilder

License requirements: cam_base ("CAM BASE")
.

setGeometryType(ProbeCalibrateStylusMoveBuilder.Geometry) - Method in interface nxopen.cam.ProbeCalibrateStylusMoveBuilder

License requirements: None.

setGeometryType(ProbeInspectBorebossMoveBuilder.Geometry) - Method in interface nxopen.cam.ProbeInspectBorebossMoveBuilder

License requirements: None.

setGeometryTypeToWAVELink(int) - Method in interface nxopen.annotations.PmiWaveLinkBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setGeometryUsageType(Mesh2dBuilder.GeometryType) - Method in interface nxopen.cae.Mesh2dBuilder

Deprecated.

Deprecated in NX11.0.0. Use CAE#meshControlBuilder instead.

setGeomFixupTol(double) - Method in interface nxopen.IgesImporter

License requirements: None.

setGeomFreeEdgeColor(NXColor) - Method in interface nxopen.cae.ModelDisplayBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setGeomFreeEdgeEndMarker(ModelDisplayBuilder.FreeEdgeMarker) - Method in interface nxopen.cae.ModelDisplayBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setGeomFreeEdgeFont(ModelDisplayBuilder.FreeEdgeFont) - Method in interface nxopen.cae.ModelDisplayBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setGeomFreeEdgeLineWidth(ModelDisplayBuilder.FreeEdgeWidth) - Method in interface nxopen.cae.ModelDisplayBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setGeomParentStringValue(String) - Method in interface nxopen.cam.FeatureBasedGeomBuilder

Set a string value to the geom parent parameter index for the object.

setGeomStitchedEdgeColor(NXColor) - Method in interface nxopen.cae.ModelDisplayBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setGeomStitchedEdgeEndMarker(ModelDisplayBuilder.StitchedEdgeMarker) - Method in interface nxopen.cae.ModelDisplayBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setGeomStitchedEdgeFont(ModelDisplayBuilder.StitchedEdgeFont) - Method in interface nxopen.cae.ModelDisplayBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setGeomStitchedEdgeLineWidth(ModelDisplayBuilder.StitchedEdgeWidth) - Method in interface nxopen.cae.ModelDisplayBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setGiveFailedMessage(int) - Method in interface nxopen.tooling.EdgePatchBuilder

Set the giving failed message value.

setGlobalDeformation(boolean) - Method in interface nxopen.die.SpringbackCompensationBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR nx_freeform_2 ("advanced freeform modeling")
.

setGlobalId(int) - Method in interface nxopen.cae.LaminatePly

License requirements: nx_lam_composites ("Laminate Composites")
.

setGlobalMaterialType(TrueShadingBuilder.MaterialType) - Method in interface nxopen.display.TrueShadingBuilder

License requirements: None.

setGlobalMaterialType(TrueStudioBuilder.GlobalMaterial) - Method in interface nxopen.display.TrueStudioBuilder

License requirements: None.

setGlobalMaxPenetration(double) - Method in interface nxopen.motion.BodyContactRecurdyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using BodyContactRecurdyn.globalMaxPenetrationExpression() to query or edit it.

setGlobalOffsetRadius(AeroJoggleBuilder.SideType, boolean) - Method in interface nxopen.features.sheetmetal.AeroJoggleBuilder

Set the Global flag for offset radius
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setGlobalOptimization(boolean) - Method in interface nxopen.cam.MillCutParameters

License requirements: cam_base ("CAM BASE")
.

setGlobalSearch(boolean) - Method in interface nxopen.facet.BestFitAlignBuilder

Sets a value indicating whether to do a global search
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_1 ("basic freeform modeling")
.

setGlobalSensitivityDesignVariables(DAODesignVariable[]) - Method in interface nxopen.cae.optimization.DAOSolution

Sets the optimization solution design variables for global sensitivity optimization type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setGlobalSensitivityFlag(boolean) - Method in interface nxopen.cae.optimization.DAODesignVariableBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setGlobalSizeAutoScaled(boolean) - Method in interface nxopen.cae.xyplot.TextStyleSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setGlobalSizeScale(double) - Method in interface nxopen.cae.xyplot.TextStyleSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setGlobalStationaryRadius(AeroJoggleBuilder.SideType, boolean) - Method in interface nxopen.features.sheetmetal.AeroJoggleBuilder

Set the Global flag for stationary radius
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setGlobalStopPointMethod(NcmWedmBuilder.GlobalStopPointMethodTypes) - Method in interface nxopen.cam.NcmWedmBuilder

License requirements: cam_base ("CAM BASE")
.

setGlobalStopPointType(NcmWedmBuilder.GlobalStopPointTypes) - Method in interface nxopen.cam.NcmWedmBuilder

License requirements: cam_base ("CAM BASE")
.

setGohomePoint(Point) - Method in interface nxopen.cam.TurnAvoidanceGohomeBuilder

License requirements: cam_base ("CAM BASE")
.

setGoHomePoint(NXObject) - Method in interface nxopen.cam.WedmBasedGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setGohomePointMode(TurnAvoidanceGohomeBuilder.GohomePointModes) - Method in interface nxopen.cam.TurnAvoidanceGohomeBuilder

License requirements: cam_base ("CAM BASE")
.

setGohomePointMotionType(TurnAvoidanceGohomeBuilder.GohomePointMotionTypes) - Method in interface nxopen.cam.TurnAvoidanceGohomeBuilder

License requirements: cam_base ("CAM BASE")
.

setGoHomePointStatus(int) - Method in interface nxopen.cam.WedmBasedGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setGoHomePointToolAxis(NXObject) - Method in interface nxopen.cam.WedmBasedGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setGotoAangle(double) - Method in interface nxopen.cam.InspectionCmmCommandBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setGotoAangle(double) - Method in interface nxopen.cam.InspectionLinear5axisMoveToPointBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setGotoBangle(double) - Method in interface nxopen.cam.InspectionCmmCommandBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setGotoBangle(double) - Method in interface nxopen.cam.InspectionLinear5axisMoveToPointBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setGotoRun(double) - Method in interface nxopen.tooling.RunSimulationBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setGougeCheckClearanceMethod(ToolPathEditorBuilder.ClearanceMethodType) - Method in interface nxopen.cam.ToolPathEditorBuilder

License requirements: None.

setGougeCheckClearancePlane(NXObject) - Method in interface nxopen.cam.ToolPathEditorBuilder

License requirements: None.

setGougeChecking(boolean) - Method in interface nxopen.cam.OperationBuilder

License requirements: cam_base ("CAM BASE")
.

setGougeCheckStockOptions(GougeCheckBuilder.GougeCheckStock) - Method in interface nxopen.cam.GougeCheckBuilder

License requirements: cam_base ("CAM BASE")
.

setGougeCheckStockUserDefinedValue(double) - Method in interface nxopen.cam.GougeCheckBuilder

License requirements: cam_base ("CAM BASE")
.

setGrade(String) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder

License requirements: None.

setGraphAutoSave(boolean) - Method in interface nxopen.cae.PostGraphPreference

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setGraphEndAction(GraphControlBuilder.EndAction) - Method in interface nxopen.mechatronics.GraphControlBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setGraphicFilenames(String[]) - Method in interface nxopen.PlotBuilder

Sets all the Graphic filenames to be saved.

setGraphicsThreshold(int) - Method in interface nxopen.cae.SimBCDisplay

Sets the number of graphic symbols after which the number of symbols in expanded mode will be reduced
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setGraphicsThresholdFlag(boolean) - Method in interface nxopen.cae.SimBCDisplay

Sets the true/false flag based on whether the graphics symbol display is to be simplified in expanded mode
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setGraphicSymbolDisplayFlag(boolean) - Method in interface nxopen.cae.CaeDOFSetDisplay

Sets the true/false flag based on whether the graphic symbol of the DOF Set is displayed in the graphics window
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setGraphicSymbolDisplayFlag(boolean) - Method in interface nxopen.cae.SimBCDisplay

Sets the true/false flag based on whether the graphic symbol of the BC is displayed in the graphics window
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setGraphOverhead(int) - Method in interface nxopen.cae.xyplot.AxisStyleSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setGraphStyle(int, GraphStyle) - Method in interface nxopen.cae.xyplot.DiagramDisplayStyles

Sets the graph style.

setGraphTitle(String) - Method in interface nxopen.cae.PostGraphBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setGraphTitle(String) - Method in interface nxopen.cae.PostGraphOrbitBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setGraphTitle(String) - Method in interface nxopen.motion.GraphBuilder

Deprecated.

Deprecated in NX11.0.0. Use Motion.GraphObjectBuilder instead.

setGrateOrientationReference(PlatformCreatorBuilder.ReferenceType) - Method in interface nxopen.routing.PlatformCreatorBuilder

License requirements: routing_platform ("Routing Platform")
.

setGrateOrientationSymbolDisplay(boolean) - Method in interface nxopen.routing.PlatformCreatorBuilder

License requirements: routing_platform ("Routing Platform")
.

setGravitationalConstants(double[]) - Method in interface nxopen.uf.UFMotion

Refer to UF_MOTION_set_gravitational_constants for documentation.

setGravityCenter(String) - Method in interface nxopen.tooling.ForceCalculationBuilder

License requirements: None.

setGravityValue(double) - Method in interface nxopen.motion.MotionSolutionBuilder

Deprecated.

Deprecated in NX8.5.0. Obtion the exression using MotionSolutionBuilder.gravityValueExpression() to query or edit it.

setGravityVector(Direction) - Method in interface nxopen.motion.MotionSolutionBuilder

License requirements: mechanisms ("MECHANISMS")
.

setGridAdultFullOutputLayer(int) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setGridAdultPartialOutputLayer(int) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setGridAngleTolerance(double) - Method in interface nxopen.weld.EasyPatternBuilder

License requirements: ugweld ("UG WELD")
.

setGridChildFullOutputLayer(int) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setGridChildPartialOutputLayer(int) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setGridColor(NXColor) - Method in interface nxopen.cae.xyplot.BaseGridLayoutStyleSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setGridColor(int) - Method in interface nxopen.preferences.WorkPlane

Sets the grid color.

setGridFailColor(NXColor) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setGridFont(DisplayableObject.ObjectFont) - Method in interface nxopen.cae.xyplot.BaseGridLayoutStyleSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setGridID(String) - Method in interface nxopen.features.shipdesign.MainDimensionsBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setGridIncrement(double) - Method in interface nxopen.weld.EasyPatternBuilder

License requirements: ugweld ("UG WELD")
.

setGridIsNonUniform(boolean) - Method in interface nxopen.preferences.WorkPlane

Sets the grid non uniform flag.

setGridLineColor(int) - Method in interface nxopen.preferences.PartModeling

Sets the grid line color
License requirements: None.

setGridLineFont(PartModeling.GridKnotLineFontType) - Method in interface nxopen.preferences.PartModeling

Sets the grid line font
License requirements: None.

setGridLinesUCount(int) - Method in interface nxopen.preferences.PartModeling

Sets the U count for grid lines.

setGridLinesVCount(int) - Method in interface nxopen.preferences.PartModeling

Sets the V count for grid lines.

setGridNCAP1000OutputColor(NXColor) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setGridNCAP1000OutputLayer(int) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setGridNCAP1350OutputColor(NXColor) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setGridNCAP1350OutputLayer(int) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setGridNCAP1700OutputColor(NXColor) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setGridNCAP1700OutputLayer(int) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setGridNCAP650OutputColor(NXColor) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setGridNCAP650OutputLayer(int) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setGridNCAPUntranslatedOutputColor(NXColor) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setGridObject(SessionDrafting.GridObjectType) - Method in interface nxopen.preferences.SessionDrafting

Sets the drafting grid object.

setGridOnTop(boolean) - Method in interface nxopen.preferences.WorkPlane

Sets the grid on top flag.

setGridOrientation(DatumPlaneGridBuilder.GridOrientationType) - Method in interface nxopen.display.DatumPlaneGridBuilder

License requirements: None.

setGridOutputFont(PedestrianProtectionBuilder.Font) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setGridOutputWidth(PedestrianProtectionBuilder.Width) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setGridParameters(UFDisp.GridContext, UFDisp.Grid) - Method in interface nxopen.uf.UFDisp

Refer to UF_DISP_set_grid_parameters for documentation.

setGridPassColor(NXColor) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setGridPointsColor(NXColor) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setGridResolution(PartModeling.GridResolutionType) - Method in interface nxopen.preferences.PartModeling

Sets the grid resolution.

setGridRgbcolorPicker(double[]) - Method in interface nxopen.display.TrueShadingBuilder

Sets the grid RGB color picker
License requirements: None.

setGridSettings(GeneralWorkFlowBuilder.GridSettingsType) - Method in interface nxopen.drawings.GeneralWorkFlowBuilder

License requirements: drafting ("DRAFTING")
.

setGridSnapTolerance(double) - Method in interface nxopen.weld.DatumSurfaceBuilder

License requirements: ugweld ("UG WELD")
.

setGridTopologyEligibilityFlag(boolean) - Method in interface nxopen.routing.SpaceReservationBuilder

Sets the grid topology eligibility flag.

setGridTopologyEligibilityFlag(boolean) - Method in interface nxopen.routing.StockBuilder

Sets the grid topology eligibility flag.

setGridType(WorkPlane.Grid) - Method in interface nxopen.preferences.WorkPlane

Sets the grid type.

setGridUntranslatedOutputLayer(int) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setGridUseBodyColor(boolean) - Method in interface nxopen.preferences.PartModeling

Sets whether grid line use body color
License requirements: None.

setGridUseBodyFont(boolean) - Method in interface nxopen.preferences.PartModeling

Sets whether grid use body font
License requirements: None.

setGridWarningColor(NXColor) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setGridWidth(DisplayableObject.ObjectWidth) - Method in interface nxopen.cae.xyplot.BaseGridLayoutStyleSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setGrooveAngle(String) - Method in interface nxopen.annotations.LineWeldSideData

Sets the groove angle
License requirements: None.

setGrooveAngle(String) - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. Use WeldGrooveBuilder.grooveAngle() instead.

setGrooveCountersinkAngle(String) - Method in interface nxopen.annotations.LineWeldDataBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setGrooveRadius(String) - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. Use WeldGrooveBuilder.grooveRadius() instead.

setGrooveShape(WeldGrooveShape) - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. Use nxopen.weld.WeldGrooveBuilder#types instead.

setGrooveType(WeldGrooveType) - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. Use WeldGrooveBuilder.edgeType() and WeldGrooveBuilder.setEdgeType(nxopen.weld.WeldGrooveBuilder.Edge) instead.

setGroundPlaneType(EnvironmentBuilder.GroundPlaneTypes) - Method in interface nxopen.display.EnvironmentBuilder

License requirements: None.

setGroundReflection(boolean) - Method in interface nxopen.display.EnvironmentBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setGroundVisibility(boolean) - Method in interface nxopen.display.EnvironmentBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setGroundWidePoint(Point) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setGroup(ShipDimensionBuilder.GroupType) - Method in interface nxopen.annotations.ShipDimensionBuilder

License requirements: drafting ("DRAFTING")
.

setGroup(boolean) - Method in interface nxopen.blockstyler.UIBlock

License requirements: None.

setGroup(boolean) - Method in interface nxopen.mechatronics.GanttOperationConditionBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setGroup(String) - Method in interface nxopen.pdm.PersistentSettings

License requirements: None.

setGroup(String) - Method in interface nxopen.pdm.SessionSettings

License requirements: None.

setGroup(String, String) - Method in interface nxopen.uf.UFClone

Refer to UF_CLONE_set_group for documentation.

setGroupActive(boolean) - Method in interface nxopen.features.Feature

Set a feature group as active group.

setGroupActive(boolean) - Method in interface nxopen.Group

Set a sketch group as active group in Direct Sketch, STE or in Drafting Sketch.

setGroupByAttributes(String) - Method in interface nxopen.cam.GroupFeatures

License requirements: cam_base ("CAM BASE")
.

setGroupByIdenticalAttributes(boolean) - Method in interface nxopen.cam.GroupFeatures

Deprecated.

Deprecated in NX9.0.1. Use CAM.GroupFeatures#groupByAttributes and CAM.GroupFeatures#setGroupByAttributes instead.

setGroupByMachiningAccessDirection(boolean) - Method in interface nxopen.cam.GroupFeatures

License requirements: cam_base ("CAM BASE")
.

setGroupConstraintOption(SessionSketch.GroupConstraintType) - Method in interface nxopen.preferences.SessionSketch

Sets the sketch group external constraint management option
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setGroupDisplayProperties(boolean) - Method in interface nxopen.GroupBuilder

License requirements: None.

setGroupDisplayProperties(boolean) - Method in interface nxopen.ObjectGeneralPropertiesBuilder

License requirements: None.

setGroupingMethodOfRule(Rule, Classifier.GroupingMethodOption) - Method in interface nxopen.visualreporting.VisualReportBuilder

Sets the Classifier.GroupingMethodOption of the active Classifier in the given Rule .

setGroupInterval(double) - Method in interface nxopen.features.ConcaveFacesBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setGroupName(String) - Method in interface nxopen.cam.InspectionSaveToLayerBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setGroupName(String) - Method in interface nxopen.GroupBuilder

License requirements: None.

setGroupName(String) - Method in interface nxopen.motion.MotionBuilder

Sets the group name
License requirements: mechanisms ("MECHANISMS")
.

setGroupName(String) - Method in interface nxopen.motion.MotionObject

Sets the group name of motion object
License requirements: mechanisms ("MECHANISMS")
.

setGroupObjects(boolean) - Method in interface nxopen.features.OffsetCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setGroupObjects(boolean) - Method in interface nxopen.features.SectionCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setGroupOperatorOption(TBSBaseDesignVariableBuilder.GroupOperator) - Method in interface nxopen.cae.optimization.TBSBaseDesignVariableBuilder

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setGroupPoints(boolean) - Method in interface nxopen.features.PointSetBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setGroups(CaeGroup[]) - Method in interface nxopen.cae.ImportSimulationBuilder

Set groups to import
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setGroupsToDelete(PartCleanup.DeleteGroups) - Method in interface nxopen.PartCleanup

Sets the option that specifies what empty groups should be deleted.

setGroupSymbols(IdSymbol[]) - Method in interface nxopen.annotations.CalloutGroupBuilder

Groups or UnGroups the symbols based on CalloutGroupBuilder.Mode .

setGroupToExplore(GroupLabel) - Method in interface nxopen.visualreporting.VisualReportExplorer

Sets the GroupLabel to explore.

setGroupType(MotionObject.GroupType) - Method in interface nxopen.motion.MotionBuilder

Sets the group type
License requirements: mechanisms ("MECHANISMS")
.

setGroupTypeOption(MotionObject.GroupType) - Method in interface nxopen.motion.MotionObject

Sets the group type of motion object
License requirements: mechanisms ("MECHANISMS")
.

setGrowDirectionOptions(PartsListBuilder.PartsListGrowDirectionOptions) - Method in interface nxopen.annotations.PartsListBuilder

License requirements: None.

setGrowthDirection(DrawingRegionBuilder.RegionGrowthDirection) - Method in interface nxopen.drawings.DrawingRegionBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setGrowthRate(double) - Method in interface nxopen.cae.MeshControlBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setGuid(String) - Method in interface nxopen.routing.RootObject

Sets the object's Global Unique Identifier (GUID).

setGuideCurve(Section) - Method in interface nxopen.weld.JointmarkGuideBuilder

License requirements: ugweld ("UG WELD")
.

setGuideDirection(MWDesignGuideLinesBuilder.DirectionType) - Method in interface nxopen.tooling.MWDesignGuideLinesBuilder

License requirements: None.

setGuideObjectType(AeroFlangeBuilder.GuideObjectTypes) - Method in interface nxopen.features.AeroFlangeBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setGuideObjectType(AeroRibBuilder.GuideObjectTypes) - Method in interface nxopen.features.AeroRibBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setGuideOffsetVector(boolean) - Method in interface nxopen.features.shipdesign.ProfileBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setGuideVector(Direction) - Method in interface nxopen.tooling.MWDesignGuideLinesBuilder

License requirements: None.

setHalfAngle(boolean) - Method in interface nxopen.features.FitSurfaceBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setHandDataSae(HumanData.SideType, String, String, String, String) - Method in interface nxopen.HumanPosturePredictionBuilder

Set the steering wheel SAE Data, L11, H17, W9 and A18 of hand data, the steering wheel pedal type should be set as Sae
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setHandFootCsys(HumanData.HandFootType, HumanData.SideType, Point3d, Matrix3x3) - Method in interface nxopen.HumanPosturePredictionBuilder

Set the Csys of hand foot, the hand foot csys should be on solid, curve or not conflict with SAE data related to its steering wheel and pedal type.

setHandFootDataCurves(HumanData.HandFootType, HumanData.SideType, NXObject[]) - Method in interface nxopen.HumanPosturePredictionBuilder

Set the curves or edges of steering wheel or pedal of hand foot data, the steering wheel pedal type should be set as Curve and the input curves should be closed
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setHandFootDataSolids(HumanData.HandFootType, HumanData.SideType, Body[]) - Method in interface nxopen.HumanPosturePredictionBuilder

Set the solid bodies of steering wheel or pedal of hand foot data, the steering wheel pedal type should be set as Solid
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setHandFootDataType(HumanData.HandFootType, HumanData.SideType, HumanPosturePredictionBuilder.SteeringWheelPedalType) - Method in interface nxopen.HumanPosturePredictionBuilder

Set the steering wheel and pedal types of hand foot data.

setHandGoalAllowNormal(HumanData.SideType, boolean) - Method in interface nxopen.features.HumanBuilder

Sets the allow normal status of hand goal for active reach, if it is TRUE, use the palmcenter site with the target z axis normal to define the hand orientation
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setHandGoalAllowRotate(HumanData.SideType, boolean) - Method in interface nxopen.features.HumanBuilder

Sets the allow rotate status of hand for active reach, if it is TRUE, rotate the target z axis normal to the best guess directions to define the hand orientation
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setHandGoalCsys(HumanData.SideType, CoordinateSystem) - Method in interface nxopen.features.HumanBuilder

Sets hand goal csys for active reach, the hand goal type should be set as csys
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setHandGoalOrientation(HumanData.SideType, Matrix3x3) - Method in interface nxopen.features.HumanBuilder

Sets hand goal orientaion for active reach, the hand goal type should be hand figure or point
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setHandGoalPoint(HumanData.SideType, Point) - Method in interface nxopen.features.HumanBuilder

Sets hand goal point for active reach, the hand goal type should be point
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setHandGoalPosition(HumanData.SideType, Point3d) - Method in interface nxopen.features.HumanBuilder

Sets hand goal position for active reach, the hand goal type should be hand figure
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setHandGoalType(HumanData.SideType, HumanData.HandGoalType) - Method in interface nxopen.features.HumanBuilder

Sets hand goal type for active reach
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setHandleActiveColor(NXColor) - Method in interface nxopen.preferences.PartVisualizationColorSetting

Sets the color of active handles.

setHandleColor(NXColor) - Method in interface nxopen.preferences.PartVisualizationColorSetting

Sets the color of handles.

setHandleFixedSizeFlag(boolean) - Method in interface nxopen.blockstyler.AngularDimension

License requirements: None.

setHandleOrientation(Vector3d) - Method in interface nxopen.blockstyler.LinearDimension

License requirements: None.

setHandleOrientation(Vector3d) - Method in interface nxopen.blockstyler.RadiusDimension

License requirements: None.

setHandleOrientxpressColor(NXColor) - Method in interface nxopen.preferences.PartVisualizationColorSetting

Sets the color of the OrientXpress handle.

setHandleOrigin(Point3d) - Method in interface nxopen.blockstyler.AngularDimension

License requirements: None.

setHandleOrigin(Point3d) - Method in interface nxopen.blockstyler.LinearDimension

License requirements: None.

setHandleOrigin(Point3d) - Method in interface nxopen.blockstyler.RadiusDimension

License requirements: None.

setHandlePoint(Point) - Method in interface nxopen.geometricutilities.BlendSetbackBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setHandlePreselectionColor(NXColor) - Method in interface nxopen.preferences.PartVisualizationColorSetting

Sets the preselection color of handles.

setHandleRadius(double) - Method in interface nxopen.blockstyler.AngularDimension

License requirements: None.

setHandleRadiusOffset(double) - Method in interface nxopen.blockstyler.AngularDimension

License requirements: None.

setHandlesColor(int) - Method in interface nxopen.preferences.SessionVisualizationColorSetting

Deprecated.

Deprecated in NX7.5.0. Use PartVisualizationColorSetting.handleColor() and PartVisualizationColorSetting.setHandleColor(nxopen.NXColor) instead

setHandleSelectionColor(NXColor) - Method in interface nxopen.preferences.PartVisualizationColorSetting

Sets the selection color of handles.

setHandleSize(int) - Method in interface nxopen.preferences.VisualizationHandles

Sets the default handle size
License requirements: None.

setHandleXAxis(Vector3d) - Method in interface nxopen.blockstyler.AngularDimension

License requirements: None.

setHandleZAxis(Vector3d) - Method in interface nxopen.blockstyler.AngularDimension

License requirements: None.

setHandlingBodies(ViewWorkflowBuilder.Handlingbodies) - Method in interface nxopen.drawings.ViewWorkflowBuilder

Deprecated.

Deprecated in NX9.0.3. Use ViewWorkflowBuilder.setHandlingBodiesTypes(nxopen.drawings.ViewWorkflowBuilder.HandlingBodiesType) instead.

setHandlingBodiesTypes(ViewWorkflowBuilder.HandlingBodiesType) - Method in interface nxopen.drawings.ViewWorkflowBuilder

License requirements: None.

setHandrailPartCharx(CharacteristicList) - Method in interface nxopen.routing.HandrailBuilder

Sets the handrail part characteristics
License requirements: routing_platform ("Routing Platform")
.

setHandShapeData(int, String, String, String, double) - Method in interface nxopen.features.HumanBuilder

Sets the hand shape data
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setHanger(boolean) - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setHangerNumber(String) - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setHarmonicDisplacement(double) - Method in interface nxopen.motion.DriverOperation

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using DriverOperation.harmonicDisplacementExpression() to query or edit it.

setHarmonicIndex(int) - Method in interface nxopen.cae.ResultProbeBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setHarnesses(HarnessDevice[]) - Method in interface nxopen.formboard.UpdateFormboardBuilder

Sets the harnesses within the harness part that the formboard must be compared with.

setHarnessPart(Part) - Method in interface nxopen.formboard.UpdateFormboardBuilder

Sets the 3D harness part file to compare the formboard against.

setHasAbsoluteColorPlot(boolean) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setHasAdditionalValuesLabel(DeviationGaugeBuilder.AdditionalValuesLabelType) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setHasAttachment(boolean) - Method in interface nxopen.mechatronics.ProxyOverrideObjectBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setHasColumnLabels(boolean) - Method in interface nxopen.blockstyler.Table

License requirements: None.

setHasCrossCurveDeviationLabel(boolean) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setHasCsysImport(boolean) - Method in interface nxopen.linedesigner.ReuseLibraryDragData

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setHasCustomScratchDirectory(boolean) - Method in interface nxopen.cae.optimization.TBSOutputControlOptions

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setHasFitDirection(boolean) - Method in interface nxopen.features.RefitFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setHasHingeVector(boolean) - Method in interface nxopen.geometricutilities.StyledSweepReferenceMethodBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setHasHorizontalRails(boolean) - Method in interface nxopen.routing.HandrailBuilder

License requirements: routing_platform ("Routing Platform")
.

setHasInfoLabel(boolean) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setHasInitialValue(boolean) - Method in interface nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder

License requirements: nx_correl_update ("FE Model Update")
.

setHasInnerToleranceLabel(boolean) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setHasLinearTransition(boolean) - Method in interface nxopen.geometricutilities.CurveShapingBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setHasLowerBound(boolean) - Method in interface nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder

License requirements: nx_correl_update ("FE Model Update")
.

setHasMaximumValueLabel(boolean) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setHasMaxNeedleLength(boolean) - Method in interface nxopen.geometricutilities.CombOptionsBuilder

License requirements: None.

setHasMinimumValueLabel(boolean) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setHasOriginGwif(boolean) - Method in interface nxopen.blockstyler.SpecifyOrientation

License requirements: None.

setHasPlaneConstraint(boolean) - Method in interface nxopen.features.PolylineBuilder

License requirements: features_modeling ("FEATURES MODELING")
.

setHasPlaneConstraint(boolean) - Method in interface nxopen.features.StudioSplineBuilderEx

License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setHasProportionalUpdate(boolean) - Method in interface nxopen.features.StudioSplineBuilderEx

License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setHasRadius(boolean) - Method in interface nxopen.features.FitCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setHasReversedDirection(boolean) - Method in interface nxopen.features.FitCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setHasSketchImport(boolean) - Method in interface nxopen.linedesigner.ReuseLibraryDragData

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setHasStubbedDatumStyle(boolean) - Method in interface nxopen.annotations.Gdt

Sets a flag indicating whether the leader has a stubbed datum style.

setHasSymmetricModelingConstraint(boolean) - Method in interface nxopen.features.GeometricConstraintData

License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setHasUniformSegments(boolean) - Method in interface nxopen.features.FitCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setHasUnitsMenu(boolean) - Method in interface nxopen.blockstyler.ExpressionBlock

License requirements: None.

setHasUpperBound(boolean) - Method in interface nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder

License requirements: nx_correl_update ("FE Model Update")
.

setHasUserSpecifiedValue(boolean) - Method in interface nxopen.visualreporting.Condition

License requirements: nx_visual_reporting ("Visual Reporting")
.

setHasUserSpecifiedValueForCondition(Condition, boolean) - Method in interface nxopen.visualreporting.VisualReportBuilder

Sets Condition.hasUserSpecifiedValue() on the specified Condition .

setHatchAngle(double) - Method in interface nxopen.annotations.HatchStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setHatchAngle(double) - Method in interface nxopen.features.MasterCutBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setHatchDistance(double) - Method in interface nxopen.annotations.HatchStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setHatchDistance(double) - Method in interface nxopen.features.MasterCutBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setHatchFile(String) - Method in interface nxopen.annotations.HatchStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setHatchFillPreferences(UFDrf.HatchFillPreferences) - Method in interface nxopen.uf.UFDrf

Refer to UF_DRF_set_hatch_fill_preferences for documentation.

setHatchMaterial(String) - Method in interface nxopen.annotations.HatchStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setHeadDesignation(ToolChangeCiBuilder.HeadDesignationTypes) - Method in interface nxopen.cam.ToolChangeCiBuilder

License requirements: cam_base ("CAM BASE")
.

setHeaderFile(String) - Method in interface nxopen.motion.MechatronicsBuilder

License requirements: mechanisms ("MECHANISMS")
.

setHeaderFlag(boolean) - Method in interface nxopen.cae.ftk.OptionSetting

Set the adding header flag when export to CSV file
License requirements: nx_ftk ("NX Advanced Graphing")
.

setHeaderLocation(TableSectionStyleBuilder.LocationOfHeader) - Method in interface nxopen.annotations.TableSectionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setHeadEyeType(HumanData.InverseKinematicsHeadEyeType) - Method in interface nxopen.features.HumanBuilder

License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setHeadSelectionType(BoltBuilder.Selection) - Method in interface nxopen.cae.BoltBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setHeadSpiderScale(double) - Method in interface nxopen.cae.BoltBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setHeadSpiderType(BoltBuilder.SpiderDiameter) - Method in interface nxopen.cae.BoltBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setHeal(boolean) - Method in interface nxopen.features.DeleteCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setHeal(boolean) - Method in interface nxopen.features.DeleteFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setHealBodies(boolean) - Method in interface nxopen.AcisImporter

License requirements: None.

setHealBodies(boolean) - Method in interface nxopen.Catiav4Importer

License requirements: None.

setHealBodies(boolean) - Method in interface nxopen.DxfdwgImporter

License requirements: None.

setHealBodies(boolean) - Method in interface nxopen.ProeImporter

License requirements: None.

setHealGeometryOnImport(boolean) - Method in interface nxopen.preferences.SessionNXGateway

Sets the heal geometry on import flag for I-DEAS import
License requirements: None.

setHealMethod(HealMethod) - Method in interface nxopen.routing.HealPath

Set heal method.

setHealOption(boolean) - Method in interface nxopen.features.AdmMoveFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setHealPathCurveType(RoutingPath.CurveType) - Method in interface nxopen.preferences.RoutingPath

License requirements: routing_base ("Routing Basic")
.

setHealPlanar(boolean) - Method in interface nxopen.features.DeleteFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setHealSolutionCsys(CoordinateSystem) - Method in interface nxopen.mechanicalrouting.PathTransitionBuilder

License requirements: routing_base ("Routing Basic")
.

setHealTraversalOrder(PathTransitionBuilder.TraversalOrder) - Method in interface nxopen.mechanicalrouting.PathTransitionBuilder

License requirements: routing_base ("Routing Basic")
.

setHeelHeight(double) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder

License requirements: None.

setHeelLength(double) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder

License requirements: None.

setHeelPoint(Point) - Method in interface nxopen.features.shipdesign.CustomBracketBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setHeelRadian(double) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder

License requirements: None.

setHeelReferencePoint(Point) - Method in interface nxopen.features.vehicledesign.BaseDataDriverBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setHeelReferencePoint(Point) - Method in interface nxopen.features.vehicledesign.BaseDataPassengerBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setHeelReferencePointActive(boolean) - Method in interface nxopen.features.vehicledesign.BaseDataDriverBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setHeelReferencePointActive(boolean) - Method in interface nxopen.features.vehicledesign.BaseDataPassengerBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setHeelWidth(double) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder

License requirements: None.

setHeight(double) - Method in interface nxopen.annotations.ForeshorteningSymbolSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setHeight(double) - Method in interface nxopen.annotations.TargetPointBuilder

License requirements: drafting ("DRAFTING")
.

setHeight(int) - Method in interface nxopen.blockstyler.DrawingArea

License requirements: None.

setHeight(int) - Method in interface nxopen.blockstyler.ListBox

License requirements: None.

setHeight(int) - Method in interface nxopen.blockstyler.MultilineString

License requirements: None.

setHeight(int) - Method in interface nxopen.blockstyler.ScrolledWindow

License requirements: None.

setHeight(int) - Method in interface nxopen.blockstyler.Tree

License requirements: None.

setHeight(double) - Method in interface nxopen.cam.ThreadedBossSet

License requirements: cam_base ("CAM BASE")
.

setHeight(double) - Method in interface nxopen.die.HandlingCoreChildBuilder

Sets the height of the handling core.

setHeight(double) - Method in interface nxopen.die.HandlingCoreParentBuilder

Sets the height of handling cores.

setHeight(double) - Method in interface nxopen.die.PadChildBuilder

Sets the height of the die pad.

setHeight(double) - Method in interface nxopen.die.PadParentBuilder

Sets the height of die pads.

setHeight(double) - Method in interface nxopen.die.PressureSystemChildBuilder

Sets the height of the pressure system.

setHeight(double) - Method in interface nxopen.die.PressureSystemParentBuilder

Sets the height of pressure systems.

setHeight(double) - Method in interface nxopen.die.RibChildBuilder

Sets the height of the die rib.

setHeight(double) - Method in interface nxopen.die.RibParentBuilder

Sets the height of die ribs.

setHeight(double) - Method in interface nxopen.drawings.DrawingSheetBuilder

License requirements: drafting ("DRAFTING")
.

setHeight(String) - Method in interface nxopen.features.BlockFeatureBuilder

The expression representing the block height.

setHeight(String) - Method in interface nxopen.features.OvercrownBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setHeight(String) - Method in interface nxopen.features.sheetmetal.BeadBuilder

Deprecated.

Deprecated in NX10.0.0. Use Expression.setRightHandSide(java.lang.String) on the Expression object returned from BeadBuilder.height() instead.

setHeight(String) - Method in interface nxopen.features.sheetmetal.JogBuilder

Deprecated.

Deprecated in NX10.0.0. Use Expression.setRightHandSide(java.lang.String) on the Expression object returned from Features.SheetMetal.JogBuilder#getHeight instead.

setHeight(double) - Method in interface nxopen.routing.electrical.ElectricalStockDefinition

Sets the height of stock
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setHeight(double) - Method in interface nxopen.weld.EasyPatternBuilder

License requirements: ugweld ("UG WELD")
.

setHeightDefinedBy(MeshControlBuilder.HeightDefinedByOption) - Method in interface nxopen.cae.MeshControlBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setHeightDimensionType(AeroRibBuilder.HeightDimensionOptions) - Method in interface nxopen.features.AeroRibBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setHeightFrom(NcmPlanarEngRetBuilder.MeasureHeightFrom) - Method in interface nxopen.cam.NcmPlanarEngRetBuilder

License requirements: cam_base ("CAM BASE")
.

setHeightScale(double) - Method in interface nxopen.display.DecalBuilder

License requirements: None.

setHeightSide(BeadBuilder.HeightSideOptions) - Method in interface nxopen.features.sheetmetal.BeadBuilder

Sets the Height side for the bead.

setHeightStep(double) - Method in interface nxopen.tooling.BlankNestingBuilder

License requirements: None.

setHeightType(SearchModelViewBuilder.ValueComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder

License requirements: None.

setHeightType(HeightType) - Method in interface nxopen.cae.connections.IHeightDefinition

License requirements: nx_masterfem ("Finite Element Modeling")
.

setHeightValue(double) - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder

License requirements: None.

setHelicalRampAngle(double) - Method in interface nxopen.cam.NcmScEngRetBuilder

Deprecated.

Deprecated in NX8.0.0. Use CAM.NcmScEngRetBuilder#helicalRampAngleBuilder instead.

setHelixMotion(int, PathHelixMotion) - Method in interface nxopen.cam.Path

Updates the data of the helix motion event at the given index
License requirements: None.

setHelixOrientationOption(PatternOrientation.Enum) - Method in interface nxopen.geometricutilities.PatternOrientation

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setHelpParameters(boolean, boolean, double, double) - Method in interface nxopen.ISketchHelpedConstraint

Sets the help parameters for the constraint
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setHelpPoint(Point) - Method in interface nxopen.features.FaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setHelpPoint(Point) - Method in interface nxopen.features.SphericalCornerBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setHelpPoint(Point3d) - Method in interface nxopen.positioning.ConstraintReference

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setHelpPoint(Point) - Method in interface nxopen.SketchChamferBuilder

License requirements: drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setHelpPoints(boolean, boolean, Point3d, Point3d) - Method in interface nxopen.ISketchHelpedConstraint

Sets the help points for the constraint
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setHelpPointSupports(NXObject[], boolean[]) - Method in interface nxopen.features.SectionSurfaceBuilderEx

For multiple solution case, set support where the help parameters locate to indicate which solution should be kept.

setHemMethod(EasyPatternBuilder.HemMethodTypes) - Method in interface nxopen.weld.EasyPatternBuilder

License requirements: ugweld ("UG WELD")
.

setHidden(AssembliesGeneralPropertiesBuilder.HiddenOptions) - Method in interface nxopen.assemblies.AssembliesGeneralPropertiesBuilder

License requirements: None.

setHiddenColor(int) - Method in interface nxopen.drawings.TraceLinesViewStyle

Sets the hidden color.

setHiddenColor(NXColor) - Method in interface nxopen.drawings.ViewStyleShipbuildingLinesBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setHiddenColor(NXColor) - Method in interface nxopen.drawings.ViewStyleTraceLinesBuilder

License requirements: drafting ("DRAFTING")
.

setHiddenColor(int) - Method in interface nxopen.preferences.TraceLinesViewPreferences

Sets the hidden color.

setHiddenEdgeStyle(ViewVisualizationVisual.HiddenEdgeStyleType) - Method in interface nxopen.preferences.ViewVisualizationVisual

Sets the hidden edge display style for shaded faces in the view.

setHiddenFont(Font) - Method in interface nxopen.drawings.TraceLinesViewStyle

Sets the hidden font
License requirements: drafting ("DRAFTING")
.

setHiddenFont(Font) - Method in interface nxopen.drawings.ViewStyleShipbuildingLinesBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setHiddenFont(Font) - Method in interface nxopen.drawings.ViewStyleTraceLinesBuilder

License requirements: drafting ("DRAFTING")
.

setHiddenFont(Font) - Method in interface nxopen.preferences.TraceLinesViewPreferences

Sets the hidden font
License requirements: drafting ("DRAFTING")
.

setHiddenGeometryColor(int) - Method in interface nxopen.preferences.PartVisualizationColorSetting

Sets the color of hidden geometry.

setHiddenGeometryColor(int) - Method in interface nxopen.preferences.PartVisualizationShade

Sets the shade hidden geometry color.

setHiddenLensFlareToggle(boolean) - Method in interface nxopen.display.CameraBuilder

License requirements: None.

setHiddenline(boolean) - Method in interface nxopen.drawings.HiddenLinesViewStyle

Sets the status of hiddenline.

setHiddenLine(boolean) - Method in interface nxopen.drawings.ViewStyleHiddenLinesBuilder

License requirements: drafting ("DRAFTING")
.

setHiddenline(boolean) - Method in interface nxopen.preferences.HiddenLinesViewPreferences

Sets the status of hiddenline.

setHiddenlineColor(int) - Method in interface nxopen.drawings.HiddenLinesViewStyle

Sets the color of hiddenline.

setHiddenLineColor(int) - Method in interface nxopen.drawings.ViewCreationWizardBuilder

License requirements: drafting ("DRAFTING")
.

setHiddenlineColor(int) - Method in interface nxopen.preferences.HiddenLinesViewPreferences

Sets the color of hidden line.

setHiddenlineFont(Font) - Method in interface nxopen.drawings.HiddenLinesViewStyle

Sets the font of hiddenline
License requirements: drafting ("DRAFTING")
.

setHiddenLineFont(int) - Method in interface nxopen.drawings.ViewCreationWizardBuilder

License requirements: drafting ("DRAFTING")
.

setHiddenlineFont(Font) - Method in interface nxopen.preferences.HiddenLinesViewPreferences

Sets the font type of hidden line.

setHiddenLineHatching(boolean) - Method in interface nxopen.drawings.SectionViewStyle

Sets the status of hidden line hatching.

setHiddenLineHatching(boolean) - Method in interface nxopen.drawings.ViewStyleSectionBuilder

License requirements: drafting ("DRAFTING")
.

setHiddenLineHatching(boolean) - Method in interface nxopen.preferences.SectionViewPreferences

Sets the status of hidden line hatching.

setHiddenLines(boolean) - Method in interface nxopen.drawings.ViewCreationWizardBuilder

License requirements: drafting ("DRAFTING")
.

setHiddenLinesColor(NXColor) - Method in interface nxopen.drawings.CustomViewSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setHiddenLinesFont(CustomViewSettingsBuilder.Font) - Method in interface nxopen.drawings.CustomViewSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setHiddenLinesWidth(CustomViewSettingsBuilder.Width) - Method in interface nxopen.drawings.CustomViewSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setHiddenlineWidth(Width) - Method in interface nxopen.drawings.HiddenLinesViewStyle

Sets the width of hiddenline
License requirements: drafting ("DRAFTING")
.

setHiddenLineWidth(int) - Method in interface nxopen.drawings.ViewCreationWizardBuilder

License requirements: drafting ("DRAFTING")
.

setHiddenlineWidth(Width) - Method in interface nxopen.preferences.HiddenLinesViewPreferences

Sets the width of hidden line or edges.

setHiddenTabPages(int[]) - Method in interface nxopen.blockstyler.TabControl

Sets the HiddenTabPages entered.

setHiddenWidth(Width) - Method in interface nxopen.drawings.TraceLinesViewStyle

Sets the hidden width
License requirements: drafting ("DRAFTING")
.

setHiddenWidth(Width) - Method in interface nxopen.drawings.ViewStyleShipbuildingLinesBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setHiddenWidth(Width) - Method in interface nxopen.drawings.ViewStyleTraceLinesBuilder

License requirements: drafting ("DRAFTING")
.

setHiddenWidth(Width) - Method in interface nxopen.preferences.TraceLinesViewPreferences

Sets the hidden width
License requirements: drafting ("DRAFTING")
.

setHiddenWireframeColor(NXColor) - Method in interface nxopen.drawings.ViewStyleShadingBuilder

License requirements: drafting ("DRAFTING")
.

setHideBlankGeometry(boolean) - Method in interface nxopen.cam.SimulationOptionsBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setHideBodyOption(boolean) - Method in interface nxopen.features.MidSurfaceByFacePairsBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setHideConstructionProcess(boolean) - Method in interface nxopen.features.shipdesign.RollingLineBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setHideFeetAndInchMarks(boolean) - Method in interface nxopen.drafting.AutomationRuleBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setHideFeetInchMark(boolean) - Method in interface nxopen.drafting.AutomationPreferencesBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setHideMotionItem(boolean) - Method in interface nxopen.tooling.MotionSimulationBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setHideOriginal(boolean) - Method in interface nxopen.features.CompositeCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setHideOriginal(boolean) - Method in interface nxopen.features.ExtractFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setHideOriginal(boolean) - Method in interface nxopen.features.FreeTransformerBuilder

License requirements: None.

setHideOriginal(boolean) - Method in interface nxopen.features.GeomcopyBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setHideOriginal(boolean) - Method in interface nxopen.features.MeshTransformerBuilder

License requirements: None.

setHideOriginal(boolean) - Method in interface nxopen.features.PatternGeometryBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setHideOriginal(boolean) - Method in interface nxopen.features.sheetmetal.CleanUpUtilityBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setHideOriginal(boolean) - Method in interface nxopen.features.shipdesign.MarkingLineBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setHideOriginal(boolean) - Method in interface nxopen.features.UntrimBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setHideOriginal(boolean) - Method in interface nxopen.features.WaveDatumBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setHideOriginal(boolean) - Method in interface nxopen.features.WaveSketchBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setHideOriginal(boolean) - Method in interface nxopen.geometricutilities.SnipIntoPatchesBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING")
.

setHideOriginalCurves(boolean) - Method in interface nxopen.features.sheetmetal.UnbendBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setHidePartGeometry(boolean) - Method in interface nxopen.cam.SimulationOptionsBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setHideReliefStatus(boolean) - Method in interface nxopen.tooling.ReliefDesignBuilder

License requirements: None.

setHideSafeZone(boolean) - Method in interface nxopen.tooling.DieEngTrimAngleCheckBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setHideSmoothEdges(boolean) - Method in interface nxopen.facet.STLImportBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setHideSmoothEdges(boolean) - Method in interface nxopen.STLImporter

Sets the Hide Smooth Edges flag.

setHideSmoothEdges(boolean) - Method in interface nxopen.VRMLImporter

Sets the Hide Smooth Edges flag.

setHideSubBlocksAsString(String) - Method in interface nxopen.blockstyler.LineColorFontWidth

License requirements: None.

setHideTool(boolean) - Method in interface nxopen.features.sheetmetal.SolidPunchBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal") OR sheet_metal_design ("SHEET METAL DESIGN")
.

setHideToolBodyFlag(boolean) - Method in interface nxopen.features.AssemblyCutBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setHighFrequencyCutoff(double) - Method in interface nxopen.cae.CorrelSolutionBuilder

License requirements: nx_correl_base ("FE Correlation")
.

setHighFrequencyCutoff(double) - Method in interface nxopen.cae.PreTestSolutionBuilder

License requirements: nx_correl_base ("FE Correlation")
.

setHighFrequencyFilteringMode(boolean) - Method in interface nxopen.cae.CorrelSolutionBuilder

License requirements: nx_correl_base ("FE Correlation")
.

setHighFrequencyFilteringMode(boolean) - Method in interface nxopen.cae.PreTestSolutionBuilder

License requirements: nx_correl_base ("FE Correlation")
.

setHighlight(NXObject, boolean) - Method in interface nxopen.tooling.RemoveHolesBuilder

Set object highlight or unhighlight.

setHighlight(Tag, int) - Method in interface nxopen.uf.UFDisp

Refer to UF_DISP_set_highlight for documentation.

setHighlightCollision(boolean) - Method in interface nxopen.tooling.RunSimulationBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setHighlightColor(NXColor) - Method in interface nxopen.annotations.PartsListBuilder

License requirements: None.

setHighlightConnectingFacesScale(int) - Method in interface nxopen.tooling.MWSearchRegionBuilder

License requirements: None.

setHighlightDamageValues(boolean) - Method in interface nxopen.cae.DurabilityDamageEvaluationBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setHighLightFacesWithSameClearance(boolean) - Method in interface nxopen.tooling.ClearanceManagementBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setHighlightFaceTranslucency(int) - Method in interface nxopen.preferences.SubdivisionModelingPreferences

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setHighlightHiddenEdgesToggle(boolean) - Method in interface nxopen.display.SelPref

License requirements: None.

setHighlightManualText(boolean) - Method in interface nxopen.annotations.PartsListBuilder

License requirements: None.

setHighlightOnCollision(boolean) - Method in interface nxopen.mechatronics.CollisionBodyBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setHighlightOnCollision(boolean) - Method in interface nxopen.mechatronics.CollisionSensorBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setHighlightOnCollision(boolean) - Method in interface nxopen.mechatronics.DistanceSensorBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setHighlightOriginalToggle(boolean) - Method in interface nxopen.display.SelPref

License requirements: None.

setHighlightPath(Path) - Method in interface nxopen.routing.ManualRouteBuilder

This function sets highlight path amongst all paths, and this highlight path only will be used for routing the stock device
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setHighlights(int, Tag[], int) - Method in interface nxopen.uf.UFDisp

Refer to UF_DISP_set_highlights for documentation.

setHighlightSelectedFace(boolean) - Method in interface nxopen.tooling.FaceColorManagementBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setHighlightSelectionOnRolloverToggle(boolean) - Method in interface nxopen.display.SelPref

License requirements: None.

setHighlightTargets(boolean) - Method in interface nxopen.cae.SimBCDisplay

Sets the flag indicating whether or not highlighting of targets is required
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setHighlightWire(boolean) - Method in interface nxopen.preferences.RoutingElectrical

Sets the option to highlight a wire in the connection list navigator.

setHighlightWithThickWidthToggle(boolean) - Method in interface nxopen.display.SelPref

License requirements: None.

setHighPrecisionRotation(boolean) - Method in interface nxopen.preferences.SessionVisualizationScreen

Sets whether mouse-driven rotation is to be done using a higher precision than normal, which means that a given mouse motion will result in a smaller rotation.

setHighQualityBitmap(boolean) - Method in interface nxopen.blockstyler.Button

License requirements: None.

setHighQualityBitmap(boolean) - Method in interface nxopen.blockstyler.Enumeration

License requirements: None.

setHighQualityBitmap(boolean) - Method in interface nxopen.blockstyler.Label

License requirements: None.

setHighQualityBitmap(boolean) - Method in interface nxopen.blockstyler.TabControl

License requirements: None.

setHighQualityBitmap(boolean) - Method in interface nxopen.blockstyler.Table

License requirements: None.

setHighQualityBitmap(boolean) - Method in interface nxopen.blockstyler.Wizard

License requirements: None.

setHighRadius(double) - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setHighThicknessColor(NXColor) - Method in interface nxopen.cae.ThicknessBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setHingeDirection(Direction) - Method in interface nxopen.drawings.SectionLineBuilder

Deprecated.

Deprecated in NX10.0.0. Use Drawings.ViewStyleOrientationBuilder#hingeLine

setHingeLine(Direction) - Method in interface nxopen.drawings.OrientationViewStyle

Sets the hinge line for an existing auxillary view.

setHingePoint(Point) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setHint(String) - Method in interface nxopen.report.BaseArgument

License requirements: None.

setHint(String[]) - Method in interface nxopen.report.CommandBuilder

Sets the command hint
License requirements: None.

setHint(String[]) - Method in interface nxopen.report.UserInput

Sets the user input hint.

setHipPoint(Point) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setHistoryBuffer(int) - Method in interface nxopen.cam.SimulationOptionsBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setHistoryFreeMode() - Method in interface nxopen.preferences.PartModeling

Deprecated.

Deprecated in NX11.0.0. History-free mode will be retired in NX11.

setHistoryMode() - Method in interface nxopen.preferences.PartModeling

Changes the modeling mode to History Modeling.

setHolderCheck(boolean) - Method in interface nxopen.cam.ToolPathEditorBuilder

License requirements: None.

setHolderDescription(String) - Method in interface nxopen.cam.ToolBuilder

License requirements: cam_base ("CAM BASE")
.

setHolderGrooveHand(GrooveToolBuilder.HolderGrooveHands) - Method in interface nxopen.cam.GrooveToolBuilder

License requirements: cam_base ("CAM BASE")
.

setHolderHand(GrooveToolBuilder.HolderHands) - Method in interface nxopen.cam.GrooveToolBuilder

License requirements: None.

setHolderHand(TurnToolBuilder.HolderHands) - Method in interface nxopen.cam.TurnToolBuilder

License requirements: None.

setHolderId(int) - Method in interface nxopen.sim.KinematicComponentBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setHolderIdString(String) - Method in interface nxopen.sim.KinematicComponentBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setHolderLibraryReference(String) - Method in interface nxopen.cam.ToolBuilder

License requirements: cam_base ("CAM BASE")
.

setHolderLibref(String) - Method in interface nxopen.cam.CutterExport

License requirements: None.

setHolderLock(boolean) - Method in interface nxopen.cam.TurningToolBuilder

License requirements: None.

setHolderSaveFlag(CutterExport.SaveFlags) - Method in interface nxopen.cam.CutterExport

License requirements: None.

setHolderShankType(TurningToolBuilder.HolderShankTypes) - Method in interface nxopen.cam.TurningToolBuilder

License requirements: None.

setHolderStyle(GrooveToolBuilder.HolderStyles) - Method in interface nxopen.cam.GrooveToolBuilder

License requirements: None.

setHolderStyle(TurnToolBuilder.HolderStyles) - Method in interface nxopen.cam.TurnToolBuilder

License requirements: None.

setHolderToggle(boolean) - Method in interface nxopen.cam.ToolChangeCiBuilder

License requirements: cam_base ("CAM BASE")
.

setHolderUse(boolean) - Method in interface nxopen.cam.TurningToolBuilder

License requirements: None.

setHoldingForce(String) - Method in interface nxopen.tooling.ForceCalculationBuilder

License requirements: None.

setHoleAllowNonCircularHolesToggle(boolean) - Method in interface nxopen.cae.MeshControlBuilder

License requirements: None.

setHoleAttributes(String, String, int, String, String, String) - Method in interface nxopen.die.HoleChildBuilder

Sets the hole attributes, note existance of attributes depends on usage in main feature.

setHoleAttributes(String, String, int, String, String, String) - Method in interface nxopen.die.HoleParentBuilder

Sets the hole attributes, note existance of attributes depends on usage in main feature.

setHoleAttributes(String, String, int, String) - Method in interface nxopen.die.PadChildBuilder

Sets the hole attributes, note existance of attributes depends on usage in main feature.

setHoleAttributes(String, String, int, String) - Method in interface nxopen.die.PadParentBuilder

Sets the hole attributes, note existance of attributes depends on usage in main feature.

setHoleAttributes(String, String, int, String) - Method in interface nxopen.die.PierceHoleChildBuilder

Sets the hole attributes, note existance of attributes depends on usage in main feature
License requirements: ug_die_design ("Die Design")
.

setHoleAttributes(String, String, int, String) - Method in interface nxopen.die.PierceHoleParentBuilder

Sets the hole attributes, note existance of attributes depends on usage in main feature
License requirements: ug_die_design ("Die Design")
.

setHoleAxis(Tag, UFVariant, Tag) - Method in interface nxopen.uf.UFHmop

Refer to UF_HMOP_set_hole_axis for documentation.

setHoleAxisType(OperationBuilder.HoleAxisTypes) - Method in interface nxopen.cam.OperationBuilder

License requirements: cam_base ("CAM BASE")
.

setHoleAxisValues(double[]) - Method in interface nxopen.cam.OperationBuilder

Set the Hole Axis values
License requirements: cam_base ("CAM BASE")
.

setHoleBossGeomType(HoleBossGeom.HoleBossTypes) - Method in interface nxopen.cam.HoleBossGeom

License requirements: cam_base ("CAM BASE")
.

setHoleCenter(Point) - Method in interface nxopen.features.sheetmetal.AeroLighteningCutoutBuilder

License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setHoleCenters(Point[]) - Method in interface nxopen.die.PadChildBuilder

Sets the hole centers of the die pad.

setHoleColor(NXColor) - Method in interface nxopen.tooling.ScrapDesignBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setHoleDefaultCylindricalFace(NXObject, int) - Method in interface nxopen.tooling.FastenerAssy

Sets the default cylindrical face for the hole in the fastener assembly
License requirements: None.

setHoleDepth(double) - Method in interface nxopen.tooling.WireHoleBuilder

License requirements: None.

setHoleDepth(Tag, UFVariant, Tag) - Method in interface nxopen.uf.UFHmop

Refer to UF_HMOP_set_hole_depth for documentation.

setHoleDepthLimitOption(HolePackageBuilder.HoleDepthLimitOptions) - Method in interface nxopen.features.HolePackageBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setHoleDepthLimitOption(EndHoleData.HoleDepthLimitOptions) - Method in interface nxopen.geometricutilities.EndHoleData

License requirements: solid_modeling ("SOLIDS MODELING")
.

setHoleDepthType(OperationBuilder.HoleDepthTypes) - Method in interface nxopen.cam.OperationBuilder

License requirements: cam_base ("CAM BASE")
.

setHoleDiameter(double) - Method in interface nxopen.die.PadChildBuilder

Sets the hole diameter of the die pad.

setHoleDiameter(double) - Method in interface nxopen.die.PadParentBuilder

Sets the hole diameter of die pads.

setHoleDiameter(double) - Method in interface nxopen.features.shipdesign.PlateDivideBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setHoleDiameter(double) - Method in interface nxopen.features.shipdesign.ShipPreparationBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setHoleDiameter(double) - Method in interface nxopen.features.shipdesign.ShipPreparationInfo

License requirements: nx_ship_basic ("Ship Basic Design")
.

setHoleDiameter(double, int) - Method in interface nxopen.tooling.FastenerAssy

Sets the diameter for the hole in the fastener assembly
License requirements: None.

setHoleDiameter(double) - Method in interface nxopen.tooling.HoleDatumSymbolBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setHoleDiameter(double) - Method in interface nxopen.tooling.WireHoleBuilder

License requirements: None.

setHoleDirection(Point3d, int) - Method in interface nxopen.tooling.FastenerAssy

Sets the direction for the hole in the fastener assembly
License requirements: None.

setHoleFaces(NXObject, int) - Method in interface nxopen.tooling.FastenerAssy

Sets the faces for the hole in the fastener assembly
License requirements: None.

setHoleForm(StartHoleData.HoleForms) - Method in interface nxopen.geometricutilities.StartHoleData

License requirements: solid_modeling ("SOLIDS MODELING")
.

setHoleFreeEdgesToggle(boolean) - Method in interface nxopen.cae.MeshControlBuilder

License requirements: None.

setHoleGridOrientation(Point3d, Matrix3x3) - Method in interface nxopen.die.SteelInsertBuilder

License requirements: ug_die_design ("Die Design")
.

setHoleHeight(double, int) - Method in interface nxopen.tooling.FastenerAssy

Sets the height for the hole in the fastener assembly
License requirements: None.

setHoleIndexColor(NXColor) - Method in interface nxopen.tooling.HoleManufacturingNoteBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setHoleIndexSize(double) - Method in interface nxopen.tooling.HoleManufacturingNoteBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setHoleIndexTypeEnum(HoleManufacturingNoteBuilder.HoleIndexType) - Method in interface nxopen.tooling.HoleManufacturingNoteBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setHoleLocation(Point3d) - Method in interface nxopen.features.HoleFeatureBuilder

License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.

setHoleManufacturingNoteColor(NXColor) - Method in interface nxopen.tooling.HoleManufacturingNoteBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setHoleManufacturingNoteSize(double) - Method in interface nxopen.tooling.HoleManufacturingNoteBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setHoleOriginDiameter(double, int) - Method in interface nxopen.tooling.FastenerAssy

Sets the origin diameter for the hole in the fastener assembly
License requirements: None.

setHoleOriginHeight(double, int) - Method in interface nxopen.tooling.FastenerAssy

Sets the origin height for the hole in the fastener assembly
License requirements: None.

setHoleOriginPosition(Point3d, int) - Method in interface nxopen.tooling.FastenerAssy

Sets the origin position for the hole in the fastener assembly
License requirements: None.

setHolePinMatching(InspectionMeasDataBuilder.BoundingType) - Method in interface nxopen.cam.InspectionMeasDataBuilder

License requirements: None.

setHolePosition(Point3d, int) - Method in interface nxopen.tooling.FastenerAssy

Sets the position for the hole in the fastener assembly
License requirements: None.

setHoleShape(PierceItemBuilder.HoleShapeType) - Method in interface nxopen.die.PierceItemBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setHoleSideCylindricalFaces(NXObject, int) - Method in interface nxopen.tooling.FastenerAssy

Sets the side cylindrical faces for the hole in the fastener assembly
License requirements: None.

setHoleStyle(boolean) - Method in interface nxopen.annotations.BaseRadialDimensionBuilder

Sets the is hole style dimension
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setHoleSubType(String) - Method in interface nxopen.features.shipdesign.PenetrationCutoutBuilder

License requirements: nx_penetration_mgmt ("Penetration Management")
.

setHoleSubType(String) - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder

License requirements: nx_penetration_mgmt ("Penetration Management")
.

setHoleTolerance(double) - Method in interface nxopen.tooling.HoleDatumSymbolBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setHoleTop(Tag, UFVariant, Tag) - Method in interface nxopen.uf.UFHmop

Refer to UF_HMOP_set_hole_top for documentation.

setHoleType(String) - Method in interface nxopen.features.shipdesign.PenetrationCutoutBuilder

License requirements: nx_penetration_mgmt ("Penetration Management")
.

setHoleType(String) - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder

License requirements: nx_penetration_mgmt ("Penetration Management")
.

setHoleType(HoleDatumSymbolBuilder.SymbolType) - Method in interface nxopen.tooling.HoleDatumSymbolBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setHoleType(NXObject, ReusablePocketBuilder.Hole) - Method in interface nxopen.tooling.ReusablePocketBuilder

Sets hole type.

setHoleTypeEnum(FaceColorManagementBuilder.HoleTypeEnumValue) - Method in interface nxopen.tooling.FaceColorManagementBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setHomePageURL(String) - Method in interface nxopen.preferences.SessionUserInterfaceUI

Sets the home page URL
License requirements: None.

setHomePtMethod(InspectionCmmCommandBuilder.HomePtMethods) - Method in interface nxopen.cam.InspectionCmmCommandBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setHomePtPoint(Point) - Method in interface nxopen.cam.InspectionCmmCommandBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setHomogeneousPlies(boolean) - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setHomogeneousPlies(boolean) - Method in interface nxopen.cae.LaminateFillSetupBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setHorizontal(boolean) - Method in interface nxopen.InferredConstraintsBuilder

License requirements: None.

setHorizontal(boolean) - Method in interface nxopen.SketchAutoConstrainBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setHorizontalAlignment(boolean) - Method in interface nxopen.InferredConstraintsBuilder

License requirements: None.

setHorizontalCenteringMark(BordersAndZonesBuilder.HorizontalCenteringMarkType) - Method in interface nxopen.drawings.BordersAndZonesBuilder

Deprecated.

Deprecated in NX10.0.0. Use SheetBorderSettingsBuilder.centeringMarksHorizontal() instead.

setHorizontalDirection(Direction) - Method in interface nxopen.features.shipdesign.PenetrationCutoutBuilder

License requirements: nx_penetration_mgmt ("Penetration Management")
.

setHorizontalDirection(Direction) - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder

License requirements: nx_penetration_mgmt ("Penetration Management")
.

setHorizontalFlip(boolean) - Method in interface nxopen.annotations.BaseCustomSymbolBuilder

License requirements: drafting ("DRAFTING")
.

setHorizontalGrowthDirection(DrawingRegionBuilder.RegionHorizontalGrowthDirection) - Method in interface nxopen.drawings.DrawingRegionBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setHorizontalInferredMarginLocation(Point3d) - Method in interface nxopen.annotations.BaseOrdinateDimensionBuilder

License requirements: drafting ("DRAFTING")
.

setHorizontalPointTravel(double) - Method in interface nxopen.features.vehicledesign.BaseDataPassengerBuilder

Deprecated.

Deprecated in NX9.0.1. Obtain the expression using BaseDataPassengerBuilder.horizontalPointTravelExp() to query or edit it.

setHorizontalReference(Direction) - Method in interface nxopen.features.shipdesign.Cutout2Builder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setHorizontalRefVector(Direction) - Method in interface nxopen.geometricutilities.HorizontalReference

License requirements: None.

setHorizontalSize(double) - Method in interface nxopen.drawings.BordersAndZonesBuilder

Deprecated.

Deprecated in NX10.0.0. Use SheetZoneSettingsBuilder.horizontalSize() instead.

setHorizontalSize(double) - Method in interface nxopen.drawings.SheetZoneSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setHorizontalTextJustification(TextJustification) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setHorizTextJust(TextJustification) - Method in interface nxopen.annotations.LetteringPreferences

Sets the horizontal text justification
License requirements: None.

setHostName(String) - Method in interface nxopen.mechatronics.OPCClientBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setHotSpot(Point) - Method in interface nxopen.annotations.LocatorDesignatorBuilder

License requirements: None.

setHotSpotText(String) - Method in interface nxopen.annotations.LocatorDesignatorBuilder

License requirements: None.

setHoverSceneDialogDelay(int) - Method in interface nxopen.annotations.DimensionWorkflowBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setHubColor(NXColor) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setHubExtensions(BladeCutLevels.HubExtensionsTypes) - Method in interface nxopen.cam.BladeCutLevels

License requirements: cam_base ("CAM BASE")
.

setHuman(Human) - Method in interface nxopen.HumanPosturePredictionBuilder

License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setHumidityPlaces(int) - Method in interface nxopen.cam.InspectionCmmCommandBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setHypermatrixBufferSize(int) - Method in interface nxopen.cae.responsesimulation.EvaluationParameters

License requirements: nx_response_anlys ("NX Response Analysis")
.

setHysteretic(double) - Method in interface nxopen.cae.responsesimulation.NormalMode

License requirements: nx_response_anlys ("NX Response Analysis")
.

setHysteretic(double) - Method in interface nxopen.motion.NormalModeProperty

License requirements: mechanisms ("MECHANISMS")
.

setI(double) - Method in interface nxopen.cam.InspectionMeasurePointBuilder

License requirements: None.

setIcon(String) - Method in interface nxopen.shipdesign.NavigatorNode

Sets the node icon.

setIconName(String) - Method in interface nxopen.features.UserDefinedFeatureIconEvent

License requirements: None.

setIconName(String) - Method in interface nxopen.markup.Icon

License requirements: None.

setIconName(String) - Method in interface nxopen.weld.DatumIconBuilder

License requirements: None.

setIconScaleFactor(double) - Method in interface nxopen.uf.UFMotion

Refer to UF_MOTION_set_icon_scale_factor for documentation.

setIconSize(Icon.Size) - Method in interface nxopen.markup.Icon

License requirements: None.

setIconsOnly(boolean) - Method in interface nxopen.blockstyler.Enumeration

License requirements: None.

setICurve(NXObject[]) - Method in interface nxopen.motion.CurveOnCurveBuilder

Sets the first curves
License requirements: mechanisms ("MECHANISMS")
.

setId(int) - Method in interface nxopen.PhysicalMaterial

Sets the material id
License requirements: None.

setId(int) - Method in interface nxopen.PhysicalMaterialBuilder

License requirements: None.

setId(String) - Method in interface nxopen.routing.RoutingSystem

Sets name of routing.

setIdDisplayRule(String) - Method in interface nxopen.uf.UFUgmgr

Refer to UF_UGMGR_set_id_display_rule for documentation.

setIdealizeParmExp(UFVariant, UFSf.IdealizeParmExp, Tag) - Method in interface nxopen.uf.UFSf

Refer to UF_SF_set_idealize_parm_exp for documentation.

setIdealizeParmFaces(UFVariant, UFSf.IdealizeParmFace, int, Tag[]) - Method in interface nxopen.uf.UFSf

Refer to UF_SF_set_idealize_parm_faces for documentation.

setIdenticalPointResolution(double) - Method in interface nxopen.IgesCreator

License requirements: None.

setIdentificationLineLocation(IdentificationLineLocation) - Method in interface nxopen.annotations.LineWeldData

Sets the identification line location
License requirements: None.

setIdentifier(String) - Method in interface nxopen.annotations.BalloonNoteBuilder

License requirements: None.

setIdentifier(String) - Method in interface nxopen.annotations.CompanyProprietaryInformationBuilder

License requirements: None.

setIdentifier(String) - Method in interface nxopen.annotations.CoordinateNoteBuilder

License requirements: None.

setIdentifier(String) - Method in interface nxopen.annotations.ExportControlBuilder

License requirements: None.

setIdentifier(String) - Method in interface nxopen.annotations.GeneralNoteBuilder

License requirements: None.

setIdentifier(String) - Method in interface nxopen.annotations.GovernmentSecurityInformationBuilder

License requirements: None.

setIdentifier(String) - Method in interface nxopen.annotations.ProcessSpecificationBuilder

License requirements: None.

setIdentifier(String) - Method in interface nxopen.annotations.SpecificNoteBuilder

License requirements: None.

setIDirectionBuilder(double) - Method in interface nxopen.cam.MachineHeadGroupBuilder

License requirements: cam_base ("CAM BASE")
.

setIdLabel(int) - Method in interface nxopen.fields.Field

Update the ID/Label of the field.

setIdLine(LineWeldBuilder.IdLineType) - Method in interface nxopen.annotations.LineWeldBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setIdLine1(String) - Method in interface nxopen.cae.AfuHeaderId

Sets the id line1 of AFU Header Id
License requirements: nx_ftk ("NX Advanced Graphing")
.

setIdLine2(String) - Method in interface nxopen.cae.AfuHeaderId

Sets the id line2 of AFU Header Id
License requirements: nx_ftk ("NX Advanced Graphing")
.

setIdLine3(String) - Method in interface nxopen.cae.AfuHeaderId

Sets the id line3 of AFU Header Id
License requirements: nx_ftk ("NX Advanced Graphing")
.

setIdLine4(String) - Method in interface nxopen.cae.AfuHeaderId

Sets the id line4 of AFU Header Id
License requirements: nx_ftk ("NX Advanced Graphing")
.

setIdName(String) - Method in interface nxopen.cam.InspectionCmmCommandBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setIdnameMethod(InspectionCmmCommandBuilder.IdnameMethods) - Method in interface nxopen.cam.InspectionCmmCommandBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setIdOffset(int) - Method in interface nxopen.cae.ImportSimulationBuilder

Set id offset
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setIdSymbolCfw(LineCfw) - Method in interface nxopen.annotations.SymbolPreferences

Sets the id symbol color, font, and width
License requirements: None.

setIdSymbolColor(NXColor) - Method in interface nxopen.annotations.SymbolStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setIdSymbolFont(DisplayableObject.ObjectFont) - Method in interface nxopen.annotations.SymbolStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setIdSymbolSize(double) - Method in interface nxopen.annotations.SymbolPreferences

Sets the id symbol size
License requirements: None.

setIdSymbolSize(double) - Method in interface nxopen.annotations.SymbolStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setIdSymbolWidth(LineWidth) - Method in interface nxopen.annotations.SymbolStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setIdType(String) - Method in interface nxopen.pdm.AlternateIdManager

Sets the value of an ID type.

setIdwOptions(FieldEvaluator.InverseDistanceWeightingEnum, double) - Method in interface nxopen.fields.FieldTable

Set the inverse distance weighting (IDW) interpolation options
License requirements: None.

setIgesSettingsFile(String) - Method in interface nxopen.NXTo2dCreator

License requirements: None.

setIgnoreBlankOnTrimSide(boolean) - Method in interface nxopen.cam.NcmPlanarEngRetBuilder

License requirements: cam_base ("CAM BASE")
.

setIgnored(boolean) - Method in interface nxopen.cam.CustomLoopSet

Deprecated.

Deprecated in NX9.0.0. Use PatchOpeningsBuilder instead.

setIgnored(boolean) - Method in interface nxopen.mechatronics.ComparisonResultBase

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setIgnoreExistingFeatures(boolean) - Method in interface nxopen.cam.FeatureRecognitionBuilder

License requirements: None.

setIgnoreFineFinishOffset(boolean) - Method in interface nxopen.cam.BoundaryTurnMemberSet

License requirements: cam_base ("CAM BASE")
.

setIgnoreFineFinishOffset(boolean) - Method in interface nxopen.cam.BoundaryTurnSet

License requirements: cam_base ("CAM BASE")
.

setIgnoreFrozen(boolean) - Method in interface nxopen.cae.optimization.TBSTopologyLinkCondition

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setIgnoreHoles(boolean) - Method in interface nxopen.SketchIntersectionCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setIgnoreLimits(boolean) - Method in interface nxopen.sim.KinematicImportMcfBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setIgnoreLoopsStatus(GeometrySet.LoopsIgnoreTypes) - Method in interface nxopen.cam.GeometrySet

Deprecated.

Deprecated in NX9.0.0. Use PatchOpeningsBuilder instead.

setIgnoreMember(boolean) - Method in interface nxopen.cam.BoundaryTurnMemberSet

License requirements: cam_base ("CAM BASE")
.

setIgnoreMinimumBoringDiameter(boolean) - Method in interface nxopen.cam.RoughFinishTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setIgnoreNodesConnectedToTinyEdges(boolean) - Method in interface nxopen.cae.modelcheck.DuplicateNodesCheckBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setIgnoreNodesInSameMesh(boolean) - Method in interface nxopen.cae.modelcheck.DuplicateNodesCheckBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setIgnorePairsWithinSameGroup(boolean) - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setIgnorePairsWithinSamePart(boolean) - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setIgnorePairsWithinSameSubassembly(boolean) - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setIgnorePairsWithinSelectedSubassemblies(boolean) - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setIgnoreTitleBlock(boolean) - Method in interface nxopen.drawings.ViewCreationWizardBuilder

License requirements: drafting ("DRAFTING")
.

setIgnoreToolTip(boolean) - Method in interface nxopen.cam.HoleDrillingBuilder

Deprecated.

Deprecated in NX10.0.3. Use CAM.HoleDrillingBuilder.SetToolDrivePoint instead.

setIgnoreTouching(boolean) - Method in interface nxopen.tooling.RunSimulationBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setIgnoreUpdateOfIdenticalVersions(boolean) - Method in interface nxopen.preferences.SessionNXGateway

Sets the ignore update of identical versions flag for I-DEAS
License requirements: None.

setIgnoreWarnings(boolean) - Method in interface nxopen.cam.FeatureRecognitionBuilder

License requirements: None.

setIgnoreWorkpiece(boolean) - Method in interface nxopen.cam.TurnEngageRetractBuilder

License requirements: cam_base ("CAM BASE")
.

setIgnoringConstraints(boolean) - Method in interface nxopen.assemblies.Arrangement

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setILine(double) - Method in interface nxopen.cam.InspectionLineFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setIlluminationType(DecalBuilder.DecalIllumination) - Method in interface nxopen.display.DecalBuilder

License requirements: None.

setImage(String) - Method in interface nxopen.blockstyler.DrawingArea

License requirements: None.

setImage(Image) - Method in interface nxopen.display.Background

License requirements: None.

setImage(Image) - Method in interface nxopen.display.DecalBuilder

License requirements: None.

setImage(Image) - Method in interface nxopen.display.EnvironmentBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setImage(Image) - Method in interface nxopen.display.ImageBasedLighting

License requirements: None.

setImage(Image) - Method in interface nxopen.display.Reflection

License requirements: None.

setImage(Image) - Method in interface nxopen.display.Wall

License requirements: None.

setImage(String) - Method in interface nxopen.report.ReportImage

Replaces the old image file with a new image file.

setImageAlignPosition(Tag, UFDrf.AlignPosition) - Method in interface nxopen.uf.UFDrf

Refer to UF_DRF_set_image_align_position for documentation.

setImageAspectRatioLock(Tag, boolean) - Method in interface nxopen.uf.UFDrf

Refer to UF_DRF_set_image_aspect_ratio_lock for documentation.

setImageBlur(EnvironmentBuilder.ImageBlurType) - Method in interface nxopen.display.EnvironmentBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setImageBlur(ImageBasedLighting.ImageBlurType) - Method in interface nxopen.display.ImageBasedLighting

License requirements: None.

setImageDimensionsDouble(double[]) - Method in interface nxopen.display.StudioImageCaptureBuilder

Sets the double image dimensions, height and width
License requirements: None.

setImageDimensionsInteger(int[]) - Method in interface nxopen.display.StudioImageCaptureBuilder

Sets the integer image dimensions, height and width
License requirements: None.

setImageFile(String) - Method in interface nxopen.cam.WorkInstructionBuilder

License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.

setImageFile(String) - Method in interface nxopen.display.ImageBaseBuilder

License requirements: None.

setImageFile(String) - Method in interface nxopen.gateway.ImageCaptureBuilder

License requirements: drafting ("DRAFTING")
.

setImageFilename(String) - Method in interface nxopen.display.Background

License requirements: None.

setImageFilename(String) - Method in interface nxopen.display.DecalBuilder

License requirements: None.

setImageFilename(String) - Method in interface nxopen.display.EnvironmentBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setImageFilename(String) - Method in interface nxopen.display.ImageBasedLighting

License requirements: None.

setImageFilename(String) - Method in interface nxopen.display.Reflection

License requirements: None.

setImageFilename(String) - Method in interface nxopen.display.Wall

License requirements: None.

setImageFromPart(String) - Method in interface nxopen.display.DecalBuilder

Set a ImageData object currently stored in the part as the image used by the builder.

setImageFromPart(String) - Method in interface nxopen.display.ImageBaseBuilder

Set a ImageData object currently stored in the part as the image used by the builder.

setImageHeight(double) - Method in interface nxopen.report.ImageOption

License requirements: None.

setImageHeight(Tag, double) - Method in interface nxopen.uf.UFDrf

Refer to UF_DRF_set_image_height for documentation.

setImageHorizon(double) - Method in interface nxopen.display.Background

License requirements: None.

setImageMovementType(ReflectionAnalysisBuilder.ImageMovementTypes) - Method in interface nxopen.geometricanalysis.ReflectionAnalysisBuilder

License requirements: None.

setImageName(String) - Method in interface nxopen.annotations.MasterSymbolBuilder

License requirements: drafting ("DRAFTING")
.

setImageName(String) - Method in interface nxopen.layout2d.DefineComponentBuilder

License requirements: nx_layout ("NX Layout")
.

setImageName(String) - Method in interface nxopen.layout2d.MakeComponentUniqueBuilder

License requirements: nx_layout ("NX Layout")
.

setImagePosition(int) - Method in interface nxopen.geometricanalysis.ReflectionAnalysisBuilder

License requirements: None.

setImagePreviewToggle(boolean) - Method in interface nxopen.display.Image

License requirements: None.

setImageReferencePoint1(Point) - Method in interface nxopen.display.ImageBaseBuilder

License requirements: None.

setImageReferencePoint2(Point) - Method in interface nxopen.display.ImageBaseBuilder

License requirements: None.

setImageReferencePoint3(Point) - Method in interface nxopen.display.ImageBaseBuilder

License requirements: None.

setImageResolution(CGMBuilder.ImageResolutionOption) - Method in interface nxopen.CGMBuilder

License requirements: None.

setImageResolution(PlotBuilder.ImageResolutionOption) - Method in interface nxopen.PlotBuilder

License requirements: None.

setImageResolution(PrintBuilder.ImageResolutionOption) - Method in interface nxopen.PrintBuilder

License requirements: None.

setImageResolution(PrintPDFBuilder.ImageResolutionOption) - Method in interface nxopen.PrintPDFBuilder

License requirements: None.

setImageRotation(double) - Method in interface nxopen.display.Background

License requirements: None.

setImageRotation(double) - Method in interface nxopen.display.EnvironmentBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setImageRotation(double) - Method in interface nxopen.display.ImageBasedLighting

License requirements: None.

setImageRotation(double) - Method in interface nxopen.report.ImageOption

License requirements: None.

setImageSize(SessionVisualizationHighQualityImage.ImageSizeType, int, int) - Method in interface nxopen.preferences.SessionVisualizationHighQualityImage

Specifies the image size to use for the generation of the High Quality Image.

setImageSizeSetting(ReflectionAnalysisBuilder.ImageSizeOption) - Method in interface nxopen.geometricanalysis.ReflectionAnalysisBuilder

License requirements: None.

setImageSizeType(DecalBuilder.ImageSize) - Method in interface nxopen.display.DecalBuilder

License requirements: None.

setImageType(ImageBasedLighting.ImagesType) - Method in interface nxopen.display.ImageBasedLighting

License requirements: None.

setImageUpVector(Direction) - Method in interface nxopen.display.Background

License requirements: None.

setImageUpVector(Direction) - Method in interface nxopen.display.EnvironmentBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setImageUpVector(Direction) - Method in interface nxopen.display.ImageBasedLighting

License requirements: None.

setImageUpVectorType(EnvironmentBuilder.ImageUpVectorTypes) - Method in interface nxopen.display.EnvironmentBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setImageUpVectorType(ImageBasedLighting.ImageUpVectorTypes) - Method in interface nxopen.display.ImageBasedLighting

License requirements: None.

setImageWidth(double) - Method in interface nxopen.report.ImageOption

License requirements: None.

setImageWidth(Tag, double) - Method in interface nxopen.uf.UFDrf

Refer to UF_DRF_set_image_width for documentation.

setImaginaryExpression(Expression) - Method in interface nxopen.fields.ComplexScalarFieldWrapper

Sets the implementation of the wrapper to the specified expressions
License requirements: None.

setImaginaryOffset(double) - Method in interface nxopen.cae.AfuOrdinateHeaderInfo

Sets the offset for imaginary part
License requirements: nx_ftk ("NX Advanced Graphing")
.

setImaginaryScale(double) - Method in interface nxopen.cae.AfuOrdinateHeaderInfo

Sets the offset for imaginary part
License requirements: nx_ftk ("NX Advanced Graphing")
.

setImmediateChildren(SessionModeling.ImmediateChildrenType) - Method in interface nxopen.preferences.SessionModeling

Sets the immediate children.

setImmediateChildren(int) - Method in interface nxopen.uf.UFModeling

Refer to UF_MODL_set_immediate_children for documentation.

setImmediateUpdate(UFVariant, boolean) - Method in interface nxopen.uf.UFSim

Refer to UF_SIM_set_immediate_update for documentation.

setImpactMethod(VelocityImpactExcitationBuilder.ImpactMethodType) - Method in interface nxopen.cae.responsesimulation.VelocityImpactExcitationBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setImportable(boolean) - Method in interface nxopen.partfamily.TemplateManager

License requirements: solid_modeling ("SOLIDS MODELING")
.

setImportAll(boolean) - Method in interface nxopen.cae.ImportSimulationBuilder

Set import all entities
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setImportBehavior(SolverAppendOption.ImportBehaviorOption) - Method in interface nxopen.cae.SolverAppendOption

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setImportBlockType(DxfdwgImporter.ImportBlocksAs) - Method in interface nxopen.DxfdwgImporter

License requirements: None.

setImportBoundaries(boolean) - Method in interface nxopen.cae.LaminateImportZonesBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setImportCamObjects(boolean) - Method in interface nxopen.PartImporter

Sets the Import CAM Objects flag.

setImportCollisionAvoidance(boolean) - Method in interface nxopen.sim.ArchiveImportBuilder

License requirements: None.

setImportCurvesType(DxfdwgImporter.ImportCurvesAs) - Method in interface nxopen.DxfdwgImporter

License requirements: None.

setImportDimensionType(DxfdwgImporter.ImportDimensionsAs) - Method in interface nxopen.DxfdwgImporter

License requirements: None.

setImportedEefFile(String) - Method in interface nxopen.cae.responsesimulation.SolutionBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setImportedSketch(NXObject) - Method in interface nxopen.tooling.ReusableObjectPasteBuilder

License requirements: None.

setImportedSketch(Sketch) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder

License requirements: None.

setImportedSolutionName(String) - Method in interface nxopen.cae.ResultsManipulationBuilder

The imported solution name if action is ResultsManipulationBuilder.Action.CREATE_IMPORTED_SOLUTION
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Created in NX8.5.0

setImportEntityType(ImportAutocadBlockBuilder.EntityType) - Method in interface nxopen.annotations.ImportAutocadBlockBuilder

License requirements: nx_layout ("NX Layout")
.

setImportFile(String) - Method in interface nxopen.mechatronics.ECADImportBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setImportFile(String) - Method in interface nxopen.mechatronics.SCOUTImportBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setImportMaterials(boolean) - Method in interface nxopen.cae.LaminateImportedLayupBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setImportMaterials(boolean) - Method in interface nxopen.cae.LaminateImportZonesBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setImportMethod(LaminateImportedLayupBuilder.ImportMethodEnum) - Method in interface nxopen.cae.LaminateImportedLayupBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setImportMotion(String) - Method in interface nxopen.tooling.UserDefinedMotionBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setImportOption(CommandImporter.OverrideOption) - Method in interface nxopen.report.CommandImporter

License requirements: None.

setImportPolylineTo(int) - Method in interface nxopen.annotations.ImportAutocadBlockBuilder

License requirements: nx_layout ("NX Layout")
.

setImportPolylineTo(DxfdwgImporter.ImportPolylinesAs) - Method in interface nxopen.DxfdwgImporter

License requirements: None.

setImportResult(boolean) - Method in interface nxopen.cae.ResultsManipulationBuilder

Import the result immediately
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setImportTo(DxfdwgImporter.ImportToEnum) - Method in interface nxopen.DxfdwgImporter

License requirements: None.

setImportTo(IgesImporter.ImportToEnum) - Method in interface nxopen.IgesImporter

License requirements: None.

setImportTo(Step203Importer.ImportToOption) - Method in interface nxopen.Step203Importer

License requirements: None.

setImportTo(Step214Importer.ImportToOption) - Method in interface nxopen.Step214Importer

License requirements: None.

setImportToTeamcenter(boolean) - Method in interface nxopen.DxfdwgImporter

License requirements: None.

setImportToTeamcenter(boolean) - Method in interface nxopen.IgesImporter

License requirements: None.

setImportToTeamcenter(boolean) - Method in interface nxopen.Step203Importer

License requirements: None.

setImportToTeamcenter(boolean) - Method in interface nxopen.Step214Importer

License requirements: None.

setImportViews(boolean) - Method in interface nxopen.PartImporter

Sets the Import Views flag.

setImprintBothSide(boolean) - Method in interface nxopen.features.TrimSheetBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setImprintData(NXObject[]) - Method in interface nxopen.features.shipdesign.ShipPreparationInfo

Sets the data to be imprinted onto the target plate system.

setImprintType(ImprintBuilder.ImprintTypes) - Method in interface nxopen.cae.ImprintBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setInaccessibleAreasChecker(boolean) - Method in interface nxopen.features.AnalyzePocketBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setInactiveSketchColor(int) - Method in interface nxopen.preferences.PartSketch

Sets the inactive sketch color
License requirements: None.

setInApplyStatus(int) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInApplyStatus(int) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setInchFractionToNearest(double) - Method in interface nxopen.drafting.AutomationPreferencesBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setInclination(boolean) - Method in interface nxopen.motion.TirePropertyCdBuilder

License requirements: mechanisms ("MECHANISMS")
.

setIncludeAllCategories() - Method in interface nxopen.AttributeIterator

Do not restrict searches to attributes with a previously given category.

setIncludeAlsoUnset(boolean) - Method in interface nxopen.AttributeIterator

Widen (or cancel the widening of) searches to attributes that have not been set, but for which the object has associated templates.

setIncludeBlank(boolean) - Method in interface nxopen.tooling.MotionSimulationBuilder

License requirements: None.

setIncludeBlankedObj(boolean) - Method in interface nxopen.Catiav5Creator

License requirements: None.

setIncludeBlends(boolean) - Method in interface nxopen.features.EditCrossSectionBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setIncludeBodiesOfSurfaceRegion(boolean) - Method in interface nxopen.cam.MillCutParameters

License requirements: cam_base ("CAM BASE")
.

setIncludeComponentParts(boolean) - Method in interface nxopen.pdm.PartOperationImportBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setIncludeComponents(boolean) - Method in interface nxopen.annotations.BillOfMaterialBuilder

License requirements: routing_base ("Routing Basic")
.

setIncludeCSYS(boolean) - Method in interface nxopen.Catiav5Creator

License requirements: None.

setIncludeCSYS(boolean) - Method in interface nxopen.Catiav5Importer

License requirements: None.

setIncludedAngle(double) - Method in interface nxopen.cam.InspectionConeFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setIncludeDependentParts(boolean) - Method in interface nxopen.pdm.PartOperationImportBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setIncludeFixture(boolean) - Method in interface nxopen.tooling.EWDraftingBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setIncludeGaskNutBolts(boolean) - Method in interface nxopen.annotations.BillOfMaterialBuilder

License requirements: routing_base ("Routing Basic")
.

setIncludeHoles(boolean) - Method in interface nxopen.features.EditCrossSectionBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setIncludeIndWireFrame(boolean) - Method in interface nxopen.Catiav5Creator

License requirements: None.

setIncludeIndWireFrame(boolean) - Method in interface nxopen.Catiav5Importer

License requirements: None.

setIncludeInstances(boolean) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setIncludeItersectionsOption(boolean) - Method in interface nxopen.cae.PostGraphAlongPathBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setIncludeLeader(boolean) - Method in interface nxopen.weld.WeldLabelBuilder

License requirements: ugweld ("UG WELD") OR structure_weld ("STRUCTURE WELD")
.

setIncludeLowerBound(boolean) - Method in interface nxopen.report.DoubleArgument

License requirements: None.

setIncludeLowerBound(boolean) - Method in interface nxopen.report.IntegerArgument

License requirements: None.

setIncludeMaster(boolean) - Method in interface nxopen.pdm.CaeCloneManager

Deprecated.

Deprecated in NX10.0.0. Use PartOperationCopyBuilder instead.

setIncludeMeanStressEffects(boolean) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setIncludeMidnodes(boolean) - Method in interface nxopen.cae.ProjectNodesToCadGeometryBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setIncludeModel(boolean) - Method in interface nxopen.cae.ResultsManipulationBuilder

Include nodes and elements
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setIncludeModelCurves(boolean) - Method in interface nxopen.drawings.HiddenLinesViewStyle

Sets the status of include model curves
License requirements: drafting ("DRAFTING")
.

setIncludeModelCurves(boolean) - Method in interface nxopen.drawings.ViewStyleHiddenLinesBuilder

License requirements: drafting ("DRAFTING")
.

setIncludeModelCurves(boolean) - Method in interface nxopen.preferences.HiddenLinesViewPreferences

Sets the status of include model curves.

setIncludeModelSpace(boolean) - Method in interface nxopen.annotations.ImportAutocadBlockBuilder

License requirements: nx_layout ("NX Layout")
.

setIncludeNestedAssemblies(boolean) - Method in interface nxopen.annotations.TableColumnBuilder

License requirements: drafting ("DRAFTING")
.

setIncludeNonBrokenWaveLinks(boolean) - Method in interface nxopen.assemblies.RelinkerBuilder

License requirements: wave ("WAVE FUNCTIONALITY")
.

setIncludeNonManifoldObj(boolean) - Method in interface nxopen.ProeImporter

License requirements: None.

setIncludeNoShowEntity(boolean) - Method in interface nxopen.Catiav5Importer

License requirements: None.

setIncludeOnlyArrays(boolean) - Method in interface nxopen.AttributeIterator

Restricts searches to array attributes.

setIncludeOnlyCategory(String) - Method in interface nxopen.AttributeIterator

Restrict searches to attributes with the given category.

setIncludeOnlyTitle(String) - Method in interface nxopen.AttributeIterator

Restrict searches to attributes with the given title.

setIncludeOnlyType(NXObject.AttributeType) - Method in interface nxopen.AttributeIterator

Restrict searches to attributes with the given type.

setIncludeOnlyUnset(boolean) - Method in interface nxopen.AttributeIterator

Restricts (or cancel the restriction of) searches to attributes that have not been set, but for which the object has associated templates.

setIncludeOption(boolean) - Method in interface nxopen.tooling.EWDraftingBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setIncludeOverStock(boolean) - Method in interface nxopen.annotations.BillOfMaterialBuilder

License requirements: routing_base ("Routing Basic")
.

setIncludeParentheses(boolean) - Method in interface nxopen.drawings.ViewDetailLabelBuilder

License requirements: drafting ("DRAFTING")
.

setIncludeParentheses(boolean) - Method in interface nxopen.drawings.ViewLabelBuilder

License requirements: drafting ("DRAFTING")
.

setIncludeParentheses(boolean) - Method in interface nxopen.drawings.ViewSectionLabelBuilder

License requirements: drafting ("DRAFTING")
.

setIncludePartialHoles(boolean) - Method in interface nxopen.annotations.HoleTableSettingsHoleFiltersBuilder

License requirements: drafting ("DRAFTING")
.

setIncludePmi(JtCreator.PmiOption) - Method in interface nxopen.JtCreator

License requirements: None.

setIncludePoints(boolean) - Method in interface nxopen.features.OptimizeCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setIncludeRelief(boolean) - Method in interface nxopen.features.shipdesign.StiffenerBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setIncludeRotationAngle(boolean) - Method in interface nxopen.drawings.ViewLabelBuilder

License requirements: drafting ("DRAFTING")
.

setIncludeRotationAngle(boolean) - Method in interface nxopen.drawings.ViewSectionLabelBuilder

License requirements: drafting ("DRAFTING")
.

setIncludeRotationSymbol(boolean) - Method in interface nxopen.drawings.ViewLabelBuilder

License requirements: drafting ("DRAFTING")
.

setIncludeRotationSymbol(boolean) - Method in interface nxopen.drawings.ViewSectionLabelBuilder

License requirements: drafting ("DRAFTING")
.

setIncludeRounding(boolean) - Method in interface nxopen.features.sheetmetal.BeadBuilder

Sets the rounding type .

setIncludeRounding(boolean) - Method in interface nxopen.features.sheetmetal.DimpleBuilder

Sets the Rounding type of the Sharp edges of bottom face and top face.

setIncludeRounding(boolean) - Method in interface nxopen.features.sheetmetal.DrawnCutoutBuilder

Sets the Rounding type of the Sharp edges of bottom face and top face.

setIncludeRounding(boolean) - Method in interface nxopen.features.sheetmetal.LouverBuilder

Sets the option to round the edges of the louver using the die radius.

setIncludeRounding(boolean) - Method in interface nxopen.features.sheetmetal.SolidPunchBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal") OR sheet_metal_design ("SHEET METAL DESIGN")
.

setIncludeSealer(boolean) - Method in interface nxopen.weld.WeldAdvisorBuilder

The sealer included or not
License requirements: ugweld ("UG WELD")
.

setIncludeSeedToggle(boolean) - Method in interface nxopen.geometricutilities.CircularPattern

License requirements: None.

setIncludeSheetBodies(boolean) - Method in interface nxopen.blockstyler.BodyCollector

License requirements: None.

setIncludeStock(boolean) - Method in interface nxopen.annotations.BillOfMaterialBuilder

License requirements: routing_base ("Routing Basic")
.

setIncludeSubComponents(boolean) - Method in interface nxopen.cam.InspectionLinkPmiBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setIncludeSubfolders(boolean) - Method in interface nxopen.annotations.ImportAutocadBlockBuilder

License requirements: nx_layout ("NX Layout")
.

setIncludeSubfolders(boolean) - Method in interface nxopen.annotations.ImportSymbolBuilder

License requirements: nx_layout ("NX Layout")
.

setIncludeSuppressedComponents(boolean) - Method in interface nxopen.assemblies.RelinkerBuilder

License requirements: wave ("WAVE FUNCTIONALITY")
.

setIncludeUpperBound(boolean) - Method in interface nxopen.report.DoubleArgument

License requirements: None.

setIncludeUpperBound(boolean) - Method in interface nxopen.report.IntegerArgument

License requirements: None.

setIncludeWires(boolean) - Method in interface nxopen.AcisImporter

License requirements: None.

setIncludeWireStock(boolean) - Method in interface nxopen.annotations.BillOfMaterialBuilder

License requirements: routing_base ("Routing Basic")
.

setIncompatibleResultOption(PostGraphBuilder.IncompatibleResult) - Method in interface nxopen.cae.PostGraphBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setIncompatibleResultsOption(ResultsCombinationBuilder.IncompatibleResults) - Method in interface nxopen.cae.ResultsCombinationBuilder

Set incompatible results option
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setIncompatibleResultsOption(ResultsEnvelopeBuilder.IncompatibleResults) - Method in interface nxopen.cae.ResultsEnvelopeBuilder

Set incompatible results option
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setIncompatibleResultsOption(ResultsReductionBuilder.IncompatibleResults) - Method in interface nxopen.cae.ResultsReductionBuilder

Set incompatible results option
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setIncompatibleResultsOption(TransientResultsReductionBuilder.IncompatibleResults) - Method in interface nxopen.cae.TransientResultsReductionBuilder

Set incompatible results option
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setIncompleteLevels(BladeCutLevels.IncompleteLevelsTypes) - Method in interface nxopen.cam.BladeCutLevels

License requirements: cam_base ("CAM BASE")
.

setInconsistentNormals(CleanupFacetBodyBuilder.CleanupOptions) - Method in interface nxopen.facet.CleanupFacetBodyBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setIncrement(int) - Method in interface nxopen.annotations.PartsListBuilder

License requirements: None.

setIncrement(double) - Method in interface nxopen.blockstyler.DoubleBlock

License requirements: None.

setIncrement(double) - Method in interface nxopen.blockstyler.DoubleTable

License requirements: None.

setIncrement(double) - Method in interface nxopen.blockstyler.IntegerBlock

License requirements: None.

setIncrement(double) - Method in interface nxopen.blockstyler.IntegerTable

License requirements: None.

setIncrement(int) - Method in interface nxopen.cae.ElementCreateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setIncrement(int) - Method in interface nxopen.cae.ElementExtrudeBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setIncrement(int) - Method in interface nxopen.cae.ElementModifyLabelBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setIncrement(int) - Method in interface nxopen.cae.ElementProjectBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setIncrement(int) - Method in interface nxopen.cae.ElementReflectBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setIncrement(int) - Method in interface nxopen.cae.ElementRevolveBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setIncrement(int) - Method in interface nxopen.cae.ElementTranslateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setIncrement(int) - Method in interface nxopen.cae.LaminateRelabelPliesBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setIncrement(int) - Method in interface nxopen.cae.NodeCreateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setIncrement(int) - Method in interface nxopen.cae.NodeModifyLabelBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setIncrement(int) - Method in interface nxopen.cae.NodeProjectBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setIncrement(int) - Method in interface nxopen.cae.NodeReflectBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setIncrement(int) - Method in interface nxopen.cae.NodeRotateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setIncrement(int) - Method in interface nxopen.cae.NodesBetweenNodesBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setIncrement(int) - Method in interface nxopen.cae.NodesOnCurveBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setIncrement(int) - Method in interface nxopen.cae.NodeTranslateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setIncrement(double) - Method in interface nxopen.cam.PitchSetting

License requirements: cam_base ("CAM BASE")
.

setIncrement(double) - Method in interface nxopen.drafting.AutomationRuleBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setIncrement(double) - Method in interface nxopen.features.SectionCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setIncrementIDNumberPerReport(boolean) - Method in interface nxopen.drawings.TrackDrawingChangesGeneralBuilder

License requirements: drafting ("DRAFTING")
.

setIncrementIsPercentage(boolean) - Method in interface nxopen.annotations.TableCellStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setIncrementValue(double) - Method in interface nxopen.annotations.TableCellStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setIndepDispType(DisplayPropertiesBuilder.IndepDomDispType) - Method in interface nxopen.fields.DisplayPropertiesBuilder

License requirements: None.

setIndependentDomainName(String) - Method in interface nxopen.cae.ResultsCombinationBuilder

Set Independent Domain Name
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setIndependentDomainName(String) - Method in interface nxopen.cae.ResultsEnvelopeBuilder

Set Independent Domain Name
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setIndependentDomainName(String) - Method in interface nxopen.cae.ResultsReductionBuilder

Set Independent Domain Name
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setIndependentValueDivisor(double) - Method in interface nxopen.fields.FieldTable

License requirements: None.

setIndependentValueDivisorOption(boolean) - Method in interface nxopen.fields.FieldTable

License requirements: None.

setIndependentValueShift(double) - Method in interface nxopen.fields.FieldTable

License requirements: None.

setIndependentValueShiftOption(boolean) - Method in interface nxopen.fields.FieldTable

License requirements: None.

setIndependentVariableValues(FieldVariable, double[]) - Method in interface nxopen.fields.FieldEvaluator

Sets values at which the Field will be evaluated for this independent variable FieldVariable .

setIndex(int) - Method in interface nxopen.annotations.DatumTargetBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setIndex(int) - Method in interface nxopen.annotations.DatumTargetData

Sets the target index.

setIndex(int) - Method in interface nxopen.annotations.IPmi

Sets the index.

setIndex(int) - Method in interface nxopen.annotations.PmiData

Sets the index
License requirements: None.

setIndex(int) - Method in interface nxopen.mechatronics.GanttOperationConditionBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setIndex(int) - Method in interface nxopen.ObjectGeneralPropertiesBuilder

License requirements: None.

setIndexDisplay(UFGdt.IndexDisplayType) - Method in interface nxopen.uf.UFGdt

Refer to UF_GDT_set_index_display for documentation.

setIndexFormat(HoleTableSettingsLabelBuilder.IndexType) - Method in interface nxopen.annotations.HoleTableSettingsLabelBuilder

License requirements: drafting ("DRAFTING")
.

setIndexListItem(int) - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setIndexSize(int) - Method in interface nxopen.cam.InspectionCmmCommandBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setIndividualDistance(boolean) - Method in interface nxopen.annotations.Centerline2dSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setIndividualDistance(boolean) - Method in interface nxopen.annotations.Centerline3dSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setIndividualDistance(boolean) - Method in interface nxopen.annotations.CenterMarkSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setIndividualDistance(boolean) - Method in interface nxopen.annotations.CircleCenterlineSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setIndividualDistance(boolean) - Method in interface nxopen.annotations.SymmetricalCenterlineSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setIndividualExport(boolean) - Method in interface nxopen.cae.FlatPatternsBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setIndividualExtensions(int, double, double) - Method in interface nxopen.annotations.CenterlineBuilder

Modifies extensions based on select object index
License requirements: drafting ("DRAFTING")
.

setInductance(double) - Method in interface nxopen.motion.PMDCMotorBuilder

Deprecated.

Deprecated in NX8.5.0. Obtion the exression using PMDCMotorBuilder.inductanceExpression() to query or edit it.

setInEditMode(boolean) - Method in interface nxopen.drawings.ViewAlignmentBuilder

License requirements: drafting ("DRAFTING")
.

setInertiaCsys(CoordinateSystem) - Method in interface nxopen.motion.LinkMassProperty

License requirements: mechanisms ("MECHANISMS")
.

setInfeedLengthType(ThreadTurningBuilder.InfeedLengthTypes) - Method in interface nxopen.cam.ThreadTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setInfeedMode(ThreadTurningBuilder.InfeedModes) - Method in interface nxopen.cam.ThreadTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setInferEdgeOutput(boolean) - Method in interface nxopen.preferences.SessionVisualizationScreen

Sets whether plotted edges reflect onscreen edge appearance.

setInferElementSize(boolean) - Method in interface nxopen.bodydes.OnestepUnformBuilder

License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setInferElementSize(boolean) - Method in interface nxopen.die.TrimLineDevelopmentBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setInferLength(boolean) - Method in interface nxopen.features.sheetmetal.AdvancedFlangeBuilder

License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setInferRadius1(boolean) - Method in interface nxopen.features.sheetmetal.BendTaperBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setInferRadius2(boolean) - Method in interface nxopen.features.sheetmetal.BendTaperBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setInferredCurveSelection(boolean) - Method in interface nxopen.blockstyler.CurveCollector

License requirements: None.

setInferredCurveSelection(boolean) - Method in interface nxopen.blockstyler.SectionBuilder

License requirements: None.

setInferredCurveSelection(boolean) - Method in interface nxopen.blockstyler.SuperSection

License requirements: None.

setInferredPrimary(boolean) - Method in interface nxopen.drawings.View2dOrientBuilder

Sets the option to infer the direction view X vector in 3D space
License requirements: drafting ("DRAFTING")
.

setInferredResultFile() - Method in interface nxopen.cae.SimResultReference

Clear previously specified result file location
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setInferredResultFile() - Method in interface nxopen.cae.SimSolution

Deprecated.

Deprecated in NX10.0.0. Use SimResultReference :SimSolution.setInferredResultFile() instead.

setInferredResultFileUnits() - Method in interface nxopen.cae.SimResultReference

Clears previously specified result file units
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setInferredResultFileUnits() - Method in interface nxopen.cae.SimSolution

Deprecated.

Deprecated in NX10.0.0. Use SimResultReference :SimSolution.setInferredResultFileUnits() instead.

setInferredStatus(InferredDouble.Lock) - Method in interface nxopen.cam.InferredDouble

License requirements: cam_base ("CAM BASE")
.

setInferRelativeToGeometry(boolean) - Method in interface nxopen.annotations.OriginBuilder

Infers a relative to geometry associative on commit if no other associativity has been applied
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING")
.

setInferThickness(boolean) - Method in interface nxopen.bodydes.OnestepUnformBuilder

License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setInferThickness(boolean) - Method in interface nxopen.die.TrimLineDevelopmentBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setInferThickness(boolean) - Method in interface nxopen.features.sheetmetal.CleanUpUtilityBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setInferThickness(boolean) - Method in interface nxopen.features.sheetmetal.MetaformBuilder

License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setInferThickness(boolean) - Method in interface nxopen.features.sheetmetal.SolidPunchBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal") OR sheet_metal_design ("SHEET METAL DESIGN")
.

setInFillPrint(Print3dBuilder.PrintInfillEnum) - Method in interface nxopen.Print3dBuilder

License requirements: None.

setInfinitePlane(Plane) - Method in interface nxopen.cae.ConvexMeshBuilder

License requirements: None.

setInfinitePlaneState(boolean) - Method in interface nxopen.cae.ConvexMeshBuilder

License requirements: None.

setInflationPressureFunction(MotionFunction) - Method in interface nxopen.motion.TirePropertyCdBuilder

License requirements: mechanisms ("MECHANISMS")
.

setInflationPressureTypeSelection(TirePropertyCdBuilder.InflationPressureType) - Method in interface nxopen.motion.TirePropertyCdBuilder

License requirements: mechanisms ("MECHANISMS")
.

setInformation(String) - Method in interface nxopen.features.CustomFeatureInformationEvent

The information about Custom Feature
License requirements: solid_modeling ("SOLIDS MODELING")
.

setInformationCheckScope(MWMoldedPartValidationBuilder.CheckScope) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationColorR01(NXColor) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationColorR02(NXColor) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationColorR03(NXColor) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationColorR04(NXColor) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationColorR05(NXColor) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationColorR06(NXColor) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationColorR07(NXColor) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationColorR08(NXColor) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationColorR09(NXColor) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationColorR10(NXColor) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationColorR11(NXColor) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationColorR12(NXColor) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationLowerLimit(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationLowerLimitR01(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationLowerLimitR02(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationLowerLimitR03(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationLowerLimitR04(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationLowerLimitR05(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationLowerLimitR06(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationLowerLimitR07(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationLowerLimitR08(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationLowerLimitR09(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationLowerLimitR10(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationLowerLimitR11(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationLowerLimitR12(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationRangeType(MWMoldedPartValidationBuilder.RangeType) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationSharpAngleLimit(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationShowBoundaryEdges(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationShowRangeR01(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationShowRangeR02(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationShowRangeR03(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationShowRangeR04(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationShowRangeR05(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationShowRangeR06(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationShowRangeR07(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationShowRangeR08(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationShowRangeR09(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationShowRangeR10(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationShowRangeR11(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationShowRangeR12(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationShowSharpEdges(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationUnit(MeasureBodies.AnalysisUnit) - Method in interface nxopen.MeasureBodies

License requirements: None.

setInformationUpperLimit(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationUpperLimitR01(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationUpperLimitR02(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationUpperLimitR03(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationUpperLimitR04(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationUpperLimitR05(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationUpperLimitR06(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationUpperLimitR07(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationUpperLimitR08(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationUpperLimitR09(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationUpperLimitR10(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationUpperLimitR11(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationUpperLimitR12(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInformationUseSingleTolerance(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setInfoWindow(boolean) - Method in interface nxopen.MeasureBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setInheritanceStatus(boolean) - Method in interface nxopen.cam.InheritableBuilder

License requirements: cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setInheritAngle(boolean) - Method in interface nxopen.annotations.AutomaticCenterlineBuilder

License requirements: drafting ("DRAFTING")
.

setInheritAngle(boolean) - Method in interface nxopen.annotations.CenterMarkSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setInheritArrangementFromParent(boolean) - Method in interface nxopen.assemblies.ArrangementsBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setInheritClippingBoundary(boolean) - Method in interface nxopen.drawings.BaseViewStyle

The status of inherit clipping boundary, if True the model view's clipping boundary are inherited when model view is imported onto the drawing, else the imported model view is placed on the drawing with an Automatic Rectangular Boundary.

setInheritClippingBoundary(boolean) - Method in interface nxopen.drawings.ViewStyleBaseBuilder

License requirements: drafting ("DRAFTING")
.

setInheritClippingBoundary(boolean) - Method in interface nxopen.preferences.BaseViewPreferences

The status of inherit clipping boundary, if True the model view's clipping boundary are inherited when model view is imported onto the drawing, else the imported model view is placed on the drawing with an Automatic Rectangular Boundary.

setInheritDisplayProperties(boolean) - Method in interface nxopen.features.CompositeCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setInheritDisplayProperties(boolean) - Method in interface nxopen.features.ExtractFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setInheritDisplayProperties(boolean) - Method in interface nxopen.features.MirrorBodyBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setInheritDisplayProperties(boolean) - Method in interface nxopen.features.WaveDatumBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setInheritDisplayProperties(boolean) - Method in interface nxopen.features.WaveInterfaceLinkerBuilder

License requirements: None.

setInheritDisplayProperties(boolean) - Method in interface nxopen.features.WavePointBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setInheritDisplayProperties(boolean) - Method in interface nxopen.features.WaveSketchBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setInherited(boolean) - Method in interface nxopen.weld.CharacteristicsValueBuilder

License requirements: ugweld ("UG WELD") OR structure_weld ("STRUCTURE WELD")
.

setInheritedMaterial() - Method in interface nxopen.cae.connections.IConnectionMod

Use this function to set the connection material to be inherited from support.

setInheritGdt(GdtOption) - Method in interface nxopen.drawings.InheritPmiViewStyle

Inherit GD and T option,that let you inherit GD and T display instances onto the drawing plane or into a drawing member view.

setInheritGdt(GdtOption) - Method in interface nxopen.preferences.InheritPmiPreferences

License requirements: drafting ("DRAFTING")
.

setInheritModelTogggle(boolean) - Method in interface nxopen.display.TrueShadingBuilder

License requirements: None.

setInheritPMI(int) - Method in interface nxopen.drawings.ViewCreationWizardBuilder

License requirements: drafting ("DRAFTING")
.

setInheritPmiMode(PmiOption) - Method in interface nxopen.drawings.InheritPmiViewStyle

License requirements: drafting ("DRAFTING")
.

setInheritPmiMode(PmiOption) - Method in interface nxopen.preferences.InheritPmiPreferences

License requirements: drafting ("DRAFTING")
.

setInheritPmiOntoDrawing(boolean) - Method in interface nxopen.drawings.ViewCreationWizardBuilder

License requirements: drafting ("DRAFTING")
.

setInheritPmiToDrawing(boolean) - Method in interface nxopen.drawings.InheritPmiViewStyle

License requirements: drafting ("DRAFTING")
.

setInheritPmiToDrawing(boolean) - Method in interface nxopen.preferences.InheritPmiPreferences

License requirements: drafting ("DRAFTING")
.

setInheritPmiTypeMask(int) - Method in interface nxopen.drawings.InheritPmiViewStyle

License requirements: drafting ("DRAFTING")
.

setInheritRadiusFromFace(boolean) - Method in interface nxopen.features.ReplaceBlendBuilder

License requirements: None.

setInheritTip(boolean) - Method in interface nxopen.tooling.DieEngDieTipBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setInitialCallout(String) - Method in interface nxopen.annotations.PartsListBuilder

License requirements: None.

setInitialConditionType(InitialConditions.Type) - Method in interface nxopen.cae.responsesimulation.InitialConditions

License requirements: nx_response_anlys ("NX Response Analysis")
.

setInitialCopyLocation(Point3d) - Method in interface nxopen.gateway.CopyCutBuilder

License requirements: None.

setInitialCurrent(double) - Method in interface nxopen.motion.PMDCMotorBuilder

Deprecated.

Deprecated in NX8.5.0. Obtion the exression using PMDCMotorBuilder.initialCurrentExpression() to query or edit it.

setInitialDeformationScale(double) - Method in interface nxopen.cae.DeformationParameters

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setInitialDeformationScaleType(Result.DeformationScale) - Method in interface nxopen.cae.DeformationParameters

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setInitialDeformationUserDefinedResultType(BaseResultType) - Method in interface nxopen.cae.DeformationParameters

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setInitialDeformationUserselectionType(Result.InitialDeformationSelection) - Method in interface nxopen.cae.DeformationParameters

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setInitialDialogDisplay(boolean) - Method in interface nxopen.preferences.SessionUserInterfaceUI

Sets the initial dialog display flag
License requirements: None.

setInitialDisplacement(double) - Method in interface nxopen.cae.responsesimulation.ModeInitialData

License requirements: nx_response_anlys ("NX Response Analysis")
.

setInitialDisplacement(double) - Method in interface nxopen.motion.DriverOperation

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using DriverOperation.initialDisplacementExpression() to query or edit it.

setInitialDistanceValue(double[]) - Method in interface nxopen.geometricutilities.LocalUntrimBuilder

Sets the initial distance value.

setInitialLength(double) - Method in interface nxopen.motion.SpringBuilder

Deprecated.

Deprecated in NX8.0.0. Obtian the expression using Motion.SpringBuilder#initialLengthExpression to query or edit it.

setInitialOrientation(Matrix3x3) - Method in interface nxopen.mechanicalrouting.TransformBlockBuilder

License requirements: routing_base ("Routing Basic")
.

setInitialOverlap(double) - Method in interface nxopen.motion.JointFrictionAdams

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using Motion.JointFrictionAdams#initialOverlapExpression to query or edit it.

setInitialOverlap(double) - Method in interface nxopen.motion.JointFrictionRecurDyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using Motion.JointFrictionRecurDyn#initialOverlapExpression to query or edit it.

setInitialPasteLocation(Point3d) - Method in interface nxopen.SketchPasteBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setInitialPasteLocation(Point3d) - Method in interface nxopen.tooling.ReusableObjectPasteBuilder

License requirements: None.

setInitialPasteLocation(Point3d) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder

License requirements: None.

setInitialPosition(Point3d) - Method in interface nxopen.mechanicalrouting.TransformBlockBuilder

License requirements: routing_base ("Routing Basic")
.

setInitialPosition(Point3d) - Method in interface nxopen.tooling.AddReusablePart

Sets the initial location, this is mainly used to set default add location of a reusable component
License requirements: None.

setInitialRetractAngle(double) - Method in interface nxopen.cam.TeachmodeLinearMoveBuilder

License requirements: cam_base ("CAM BASE")
.

setInitialRetractDistance(double) - Method in interface nxopen.cam.TeachmodeLinearMoveBuilder

License requirements: cam_base ("CAM BASE")
.

setInitialRetractType(TeachmodeLinearMoveBuilder.InitialRetractTypes) - Method in interface nxopen.cam.TeachmodeLinearMoveBuilder

License requirements: cam_base ("CAM BASE")
.

setInitialSecondaryNumber(String) - Method in interface nxopen.preferences.PartDrafting

Sets the initial secondary number
License requirements: None.

setInitialSecondarySheetNumber(String) - Method in interface nxopen.drawings.DrawingFormatSheetBuilder

License requirements: drafting ("DRAFTING")
.

setInitialSheetNumber(String) - Method in interface nxopen.drawings.DrawingFormatSheetBuilder

License requirements: drafting ("DRAFTING")
.

setInitialSheetNumber(String) - Method in interface nxopen.preferences.PartDrafting

Sets the initial sheet number
License requirements: None.

setInitialShortcuts(int[]) - Method in interface nxopen.blockstyler.Enumeration

Sets InitialShortcuts.

setInitialSignal(double) - Method in interface nxopen.motion.SignalChartBuilder

Deprecated.

Deprecated in NX8.5.0. Obtain the expression using SignalChartBuilder.initialSignalExpression() to query or edit it.

setInitialSpeed(double) - Method in interface nxopen.motion.PMDCMotorBuilder

Sets the initial speed
License requirements: nx_motion_motor ("NX Motion Motor")
.

setInitialStock(double) - Method in interface nxopen.cam.GeometrySet

License requirements: cam_base ("CAM BASE")
.

setInitialStock(double) - Method in interface nxopen.cam.SurfaceDriveGeometrySet

License requirements: cam_base ("CAM BASE")
.

setInitialType(NcmHoleMachining.InitialTypes) - Method in interface nxopen.cam.NcmHoleMachining

License requirements: cam_base ("CAM BASE")
.

setInitialType(NcmPlanarBuilder.InitialTypes) - Method in interface nxopen.cam.NcmPlanarBuilder

License requirements: cam_base ("CAM BASE")
.

setInitialType(NcmTransferTypes.InitialTypes) - Method in interface nxopen.cam.NcmTransferTypes

License requirements: cam_base ("CAM BASE")
.

setInitialValue(double) - Method in interface nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder

License requirements: nx_correl_update ("FE Model Update")
.

setInitialValue(double) - Method in interface nxopen.sim.KinematicAxisBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setInitialVelocity(double) - Method in interface nxopen.cae.responsesimulation.ModeInitialData

License requirements: nx_response_anlys ("NX Response Analysis")
.

setInitialVelocity(double) - Method in interface nxopen.motion.DriverOperation

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using DriverOperation.initialVelocityExpression() to query or edit it.

setInitJoint(HumanData.InverseKinematicsInitJoint) - Method in interface nxopen.features.HumanBuilder

License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setInitVisibility(boolean) - Method in interface nxopen.mechatronics.DisplayChangerBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setInlineBehavior(boolean) - Method in interface nxopen.mechanicalrouting.ManageInlineBehaviorBuilder

Sets true to mark current model element revision as inline design element(which moves along with connected routing design elements), false for non-inline design element (which has its own position and drives connected routing design elements.

setInnerCornerTreatmentType(boolean, FeatureProperty) - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign

Sets the inner corner treatment type in Flat as Solid operation
License requirements: nx_flexible_pcb ("NX Flexible PCB")
.

setInnerCornerTreatmentType(boolean, FeatureProperty) - Method in interface nxopen.preferences.PartSheetmetal

SETS the inner corner treatment type in Flat as Solid operation
License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setInnerCornerTreatmentValue(boolean, String) - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign

Sets the the inner corner treatment value for Flat as Solid operations
License requirements: nx_flexible_pcb ("NX Flexible PCB")
.

setInnerCornerTreatmentValue(boolean, String) - Method in interface nxopen.preferences.PartSheetmetal

SETS the inner corner treatment value for Flat as Solid operations
License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setInnerDeckSheet(Body) - Method in interface nxopen.die.DeckParentBuilder

Sets the inner deck sheet of deck.

setInnerDiameter(double) - Method in interface nxopen.cam.BoundaryTurnBlank

License requirements: cam_base ("CAM BASE")
.

setInnerDiameterType(SearchModelViewBuilder.ValueComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder

License requirements: None.

setInnerDiameterValue(double) - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder

License requirements: None.

setInnerDimensionOffsetValue(double) - Method in interface nxopen.tooling.AutoDimensionBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setInnerJointAsymmetric(boolean) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setInnerLineType(DynamicCurbBuilder.MethodType) - Method in interface nxopen.features.vehicledesign.DynamicCurbBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setInnerMold(boolean) - Method in interface nxopen.features.sheetmetal.ExportFlatPatternBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setInnerOuterType(CamInspectionOperationInneroutertypes) - Method in interface nxopen.cam.InspectionCircleFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setInnerOuterType(CamInspectionOperationInneroutertypes) - Method in interface nxopen.cam.InspectionConeFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setInnerOuterType(CamInspectionOperationInneroutertypes) - Method in interface nxopen.cam.InspectionCparlnFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setInnerOuterType(CamInspectionOperationInneroutertypes) - Method in interface nxopen.cam.InspectionCylinderFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setInnerOuterType(CamInspectionOperationInneroutertypes) - Method in interface nxopen.cam.InspectionParplnFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setInnerOuterType(CamInspectionOperationInneroutertypes) - Method in interface nxopen.cam.InspectionSphereFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setInnerOuterType(CamInspectionOperationInneroutertypes) - Method in interface nxopen.cam.InspectionTorusFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setInnerTolerance(double) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setINormal(double) - Method in interface nxopen.cam.InspectionLineFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setInOutType(CamInspectionOperationInneroutertypes) - Method in interface nxopen.cam.InspectionArcFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setInPartingCommand(int) - Method in interface nxopen.tooling.MWPartingManagerBuilder

Set if it is within a parting command.

setInProcessFeatureType(String) - Method in interface nxopen.cam.Operation

Set the in process feature type
License requirements: cam_base ("CAM BASE")
.

setInputAction(FeatureExtractionBuilder.InputActions) - Method in interface nxopen.facet.FeatureExtractionBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setInputAttributesFilter(String[]) - Method in interface nxopen.shapesearch.ShapeSearchBuilder

The input attributes filter to be searched
License requirements: shape_search ("Shape Search")
.

setInputAttributesName(String[]) - Method in interface nxopen.shapesearch.ShapeSearchBuilder

The input attributes name to be searched
License requirements: shape_search ("Shape Search")
.

setInputBodyOption(MergeSubdivisionBodiesBuilder.InputBodyOptions) - Method in interface nxopen.features.subdivision.MergeSubdivisionBodiesBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setInputBodyOption(SplitSubdivisionBodyBuilder.InputBodyOptions) - Method in interface nxopen.features.subdivision.SplitSubdivisionBodyBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setInputChanged(boolean) - Method in interface nxopen.features.StyledCornerBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setInputCurveOption(StudioSplineBuilder.CurveOption) - Method in interface nxopen.features.StudioSplineBuilder

Deprecated.

Deprecated in NX8.0.0. Use StudioSplineBuilderEx instead.

setInputCurveOption(StudioSplineBuilderEx.InputCurveOptions) - Method in interface nxopen.features.StudioSplineBuilderEx

License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setInputCurveOption(CurveOptions.InputCurve) - Method in interface nxopen.geometricutilities.CurveOptions

Sets the curve options
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setInputCurveOptions(ExtractCagePolylineBuilder.InputCurveOption) - Method in interface nxopen.features.subdivision.ExtractCagePolylineBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setInputCurves(BlendCurve3DBuilder.InputCurvesOption) - Method in interface nxopen.tooling.BlendCurve3DBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING")
.

setInputDefinition(PostScenarioInputDefinition) - Method in interface nxopen.cae.PostScenarioBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setInputDirection(DirectionDataComponent) - Method in interface nxopen.cae.responsesimulation.ModalResultsEvaluationSettingBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setInputDynaFile(String) - Method in interface nxopen.tooling.LsdynaKfileGeneratorBuilder

Sets the input dyna file.

setInputFeatures(CAMFeature[]) - Method in interface nxopen.cam.GroupFeatures

Set the list of input features
License requirements: cam_base ("CAM BASE")
.

setInputFile(String) - Method in interface nxopen.AcisImporter

License requirements: None.

setInputFile(String) - Method in interface nxopen.ASCImporter

License requirements: nx_layout ("NX Layout")
.

setInputFile(String) - Method in interface nxopen.cae.WeldBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setInputFile(String) - Method in interface nxopen.Catiav4Importer

License requirements: None.

setInputFile(String) - Method in interface nxopen.Catiav5Creator

License requirements: None.

setInputFile(String) - Method in interface nxopen.Catiav5Importer

License requirements: None.

setInputFile(String) - Method in interface nxopen.DxfdwgCreator

License requirements: None.

setInputFile(String) - Method in interface nxopen.DxfdwgImporter

License requirements: None.

setInputFile(String) - Method in interface nxopen.IgesCreator

License requirements: None.

setInputFile(String) - Method in interface nxopen.IgesImporter

License requirements: None.

setInputFile(String) - Method in interface nxopen.NXTo2dCreator

License requirements: None.

setInputFile(String) - Method in interface nxopen.ProeImporter

License requirements: None.

setInputFile(String) - Method in interface nxopen.Step203Creator

Deprecated.

Deprecated in NX11.0.0. Use StepCreator instead.

setInputFile(String) - Method in interface nxopen.Step203Importer

License requirements: None.

setInputFile(String) - Method in interface nxopen.Step214Creator

Deprecated.

Deprecated in NX11.0.0. Use StepCreator instead.

setInputFile(String) - Method in interface nxopen.Step214Importer

License requirements: None.

setInputFile(String) - Method in interface nxopen.StepCreator

License requirements: None.

setInputFile(String) - Method in interface nxopen.tooling.SIZERImportBuilder

License requirements: None.

setInputFile(String) - Method in interface nxopen.weld.WeldImportBuilder

License requirements: None.

setInputFolder(String) - Method in interface nxopen.annotations.ImportAutocadBlockBuilder

License requirements: nx_layout ("NX Layout")
.

setInputFolder(String) - Method in interface nxopen.annotations.ImportSymbolBuilder

License requirements: nx_layout ("NX Layout")
.

setInputFormat(InspectionMeasDataBuilder.InputFormatType) - Method in interface nxopen.cam.InspectionMeasDataBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setInputMotionType(TransmissibilityEvaluationSettingBuilder.MotionType) - Method in interface nxopen.cae.responsesimulation.TransmissibilityEvaluationSettingBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setInputName(String) - Method in interface nxopen.tooling.ElectrodeInitializationBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setInputNode(FENode) - Method in interface nxopen.cae.responsesimulation.ModalResultsEvaluationSettingBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setInputOutput(int) - Method in interface nxopen.mechatronics.AdapterSignalBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setInputParm(double) - Method in interface nxopen.tooling.SubInsertBuilder

License requirements: None.

setInputPart(String) - Method in interface nxopen.shapesearch.ShapeSearchBuilder

License requirements: shape_search ("Shape Search")
.

setInputPathString(String) - Method in interface nxopen.routing.CompareRunsBuilder

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setInputs(int) - Method in interface nxopen.features.MapleBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setInputStatus(BridgeFacetBodyBuilder.Input) - Method in interface nxopen.facet.BridgeFacetBodyBuilder

License requirements: None.

setInputStatus(MergeFacetBodyBuilder.Input) - Method in interface nxopen.facet.MergeFacetBodyBuilder

License requirements: studio_free_form ("STUDIO FREE FORM") OR die_engineering ("DIE ENGINEERING")
.

setInputStatus(SewFacetBodyBuilder.Input) - Method in interface nxopen.facet.SewFacetBodyBuilder

License requirements: studio_free_form ("STUDIO FREE FORM") OR die_engineering ("DIE ENGINEERING")
.

setInputType(DieDirectionBuilder.DirectionType) - Method in interface nxopen.die.DieDirectionBuilder

License requirements: None.

setInputType(DieLocationBuilder.LocationType) - Method in interface nxopen.die.DieLocationBuilder

License requirements: None.

setInputType(DiePlaneBuilder.PlaneType) - Method in interface nxopen.die.DiePlaneBuilder

License requirements: ug_die_design ("Die Design")
.

setInputType(UserInput.Type) - Method in interface nxopen.report.UserInput

License requirements: None.

setInputTypeName(String) - Method in interface nxopen.cam.MapFeatureTeaching

Sets the selected input type name
License requirements: fbm_author ("FBM Author")
.

setInsertGroupMaterial(QuickQuotationBuilder.InsertGroupMaterials) - Method in interface nxopen.tooling.QuickQuotationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setInsertionMethod(IFormBuilder.InsertionMethodOptions) - Method in interface nxopen.features.IFormBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setInsertionMethod(CurveShapingBuilder.InsertionMethodOptions) - Method in interface nxopen.geometricutilities.CurveShapingBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setInsertionPoint(Point) - Method in interface nxopen.features.TabNoteCfgBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setInsertionPointOption(ImageBaseBuilder.InsertionPoint) - Method in interface nxopen.display.ImageBaseBuilder

License requirements: None.

setInsertKnotDirection(StudioXformBuilder.InsertKnotDirectionType) - Method in interface nxopen.features.StudioXformBuilder

Deprecated.

Deprecated in NX8.5.0. Use StudioXformBuilderEx instead.

setInsertKnotDirection(StudioXformBuilderEx.InsertKnotDirectionType) - Method in interface nxopen.features.StudioXformBuilderEx

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setInsertKnotParameter(int) - Method in interface nxopen.features.StudioXformBuilder

Deprecated.

Deprecated in NX8.5.0. Use StudioXformBuilderEx instead.

setInsertKnotParameter(int) - Method in interface nxopen.features.StudioXformBuilderEx

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setInsertMode(DieInsertBuilder.InsertModeItems) - Method in interface nxopen.tooling.DieInsertBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setInsertNewBlank(TaggedObject) - Method in interface nxopen.tooling.BlankGeneratorBuilder

License requirements: None.

setInsertPosition(TurningToolBuilder.InsertPositions) - Method in interface nxopen.cam.TurningToolBuilder

License requirements: None.

setInsertPosition(SpecialPiercingInsertBuilder.InsertPositionTypes) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setInsertShape(GrooveToolBuilder.InsertShapes) - Method in interface nxopen.cam.GrooveToolBuilder

License requirements: None.

setInsertShape(ThreadToolBuilder.InsertShapes) - Method in interface nxopen.cam.ThreadToolBuilder

License requirements: None.

setInsertShape(TurnToolBuilder.InsertShapes) - Method in interface nxopen.cam.TurnToolBuilder

License requirements: None.

setInsertStripTog(boolean) - Method in interface nxopen.tooling.InitProjBuilder

License requirements: None.

setInsertType(SteelInsertBuilder.InsertTypeOption) - Method in interface nxopen.die.SteelInsertBuilder

Sets the insert type
License requirements: ug_die_design ("Die Design")
.

setInsertType(SteelInsertSegmentChildBuilder.InsertTypeOption) - Method in interface nxopen.die.SteelInsertSegmentChildBuilder

Sets the insert type
License requirements: ug_die_design ("Die Design")
.

setInsertType(SteelInsertSegmentParentBuilder.InsertTypeOption) - Method in interface nxopen.die.SteelInsertSegmentParentBuilder

Sets the insert type
License requirements: ug_die_design ("Die Design")
.

setInsertType(BendInsertDesignBuilder.InsertTypeOption) - Method in interface nxopen.tooling.BendInsertDesignBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setInsertType(SpecialFormingBuilder.PunchOrDie) - Method in interface nxopen.tooling.SpecialFormingBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setInset(AdvancedFlangeBuilder.Insets) - Method in interface nxopen.features.sheetmetal.AdvancedFlangeBuilder

License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setInsetMenuDialogComments(boolean) - Method in interface nxopen.preferences.SessionUserInterface

Sets the insert menu/dialog comments flag
License requirements: None.

setInsetType(BridgeTransitionBuilder.InsetOptions) - Method in interface nxopen.features.sheetmetal.BridgeTransitionBuilder

License requirements: nx_flexible_pcb ("NX Flexible PCB") OR nx_sheet_metal ("NX Sheet Metal")
.

setInsetType(FlangeBuilder.InsetTypeOptions) - Method in interface nxopen.features.sheetmetal.FlangeBuilder

Sets the inset type (inside, outside, bendoutside) for the flange.

setInsetType(HemFlangeBuilder.InsetTypeOptions) - Method in interface nxopen.features.sheetmetal.HemFlangeBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setInsideStandard(MirrorCertificationBuilder.InsideStandardsType) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setInspectionChangeFacesColor(boolean) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setInspectionDimension(boolean) - Method in interface nxopen.annotations.DimensionPreferences

Sets the flag indicating whether the dimension is an inspection dimension
License requirements: None.

setInspectionDimension(boolean) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setInspectionDimensionFlag(boolean) - Method in interface nxopen.annotations.Dimension

Sets a setting to control the inspection box displayed around the dimension value.

setInspectionDisplayFringeColorPlot(boolean) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setInspectionDisplayRayVectors(boolean) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setInspectionIncludeAllFaces(boolean) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setInspectionMode(InspectionMethodBuilder.InspectionModes) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setInspectionMode(InspectionPathBuilder.InspectModeType) - Method in interface nxopen.cam.InspectionPathBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setInspectionSelectedFacesColor(NXColor) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setInspectionSymbolAroundAppendedText(InspectionSymbolAroundAppendedText) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setInspectionThicknessFilterRangeHighLimit(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setInspectionThicknessFilterRangeLowLimit(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setInspectionTranslucency(int) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setInspectionUseThicknessRangeSelect(boolean) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setInstallDirection(StandardPartItemBuilder.Direction) - Method in interface nxopen.features.shipdesign.CollarPlateBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setInstallFifthDirection(StandardPartItemBuilder.Direction) - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setInstallFirstDirection(StandardPartItemBuilder.Direction) - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setInstallFourthDirection(StandardPartItemBuilder.Direction) - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setInstallOptions(MoldFillingBuilder.InstallOption) - Method in interface nxopen.tooling.MoldFillingBuilder

License requirements: ug_mold_design ("UG MOLD")
.

setInstallSecondDirection(StandardPartItemBuilder.Direction) - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setInstallThirdDirection(StandardPartItemBuilder.Direction) - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setInstanceBooleanUserAttribute(String, int, boolean, Update.Option) - Method in interface nxopen.assemblies.Component

Creates or modifies a boolean attribute with the option to update or not.

setInstanceDisplayInformation(boolean) - Method in interface nxopen.uf.UFGdt

Refer to UF_GDT_set_instance_display_information for documentation.

setInstanceFeatureFaces(NXObject, int) - Method in interface nxopen.tooling.FastenerAssy

Sets the instance feature face for the hole in the fastener assembly
License requirements: None.

setInstanceIntent(Tag, UFAssem.InstanceIntent) - Method in interface nxopen.uf.UFAssem

Refer to UF_ASSEM_set_instance_intent for documentation.

setInstanceName(String) - Method in interface nxopen.mechatronics.SystemObjectBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setInstanceNameCombo(String) - Method in interface nxopen.routing.InstanceNameLookupBuilder

License requirements: routing_pipetube ("Routing Piping and Tubing")
.

setInstanceTimeUserAttribute(String, int, String, Update.Option) - Method in interface nxopen.assemblies.Component

Creates or modifies a time attribute with the option to update or not.

setInstanceUserAttribute(NXObject.AttributeInformation, Update.Option) - Method in interface nxopen.assemblies.Component

Creates or modifies an attribute with the option to update or not.

setInstanceUserAttribute(String, int, int, Update.Option) - Method in interface nxopen.assemblies.Component

Creates or modifies an integer attribute with the option to update or not.

setInstanceUserAttribute(String, int, double, Update.Option) - Method in interface nxopen.assemblies.Component

Creates or modifies a real attribute with the option to update or not.

setInstanceUserAttribute(String, int, String, Update.Option) - Method in interface nxopen.assemblies.Component

Creates or modifies a string attribute with the option to update or not.

setInstanceUserAttribute(String, int, Update.Option) - Method in interface nxopen.assemblies.Component

Creates or modifies a null attribute with the option to update or not.

setInstanceUserAttributeLock(String, NXObject.AttributeType, boolean) - Method in interface nxopen.assemblies.Component

Lock or unlock the given attribute.

setInstructionFieldPosition(MirrorCertificationBuilder.InstructionFieldPositionType) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setInstructionFieldType(MirrorCertificationBuilder.InstructionFieldsType) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setInsulateProfile(boolean) - Method in interface nxopen.features.shipdesign.SteelInsulationBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setInsulation(boolean) - Method in interface nxopen.assemblies.MechanicalRoutingSubsetBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setInt(UFVariant, String, int) - Method in interface nxopen.uf.UFMom

Refer to UF_MOM_set_int for documentation.

setIntApplicationKey(int) - Method in interface nxopen.features.TrackingData

Sets the optional application key of integer type for tracked entity
License requirements: solid_modeling ("SOLIDS MODELING")
.

setIntArray(UFVariant, String, int, int[]) - Method in interface nxopen.uf.UFMom

Refer to UF_MOM_set_int_array for documentation.

setIntArraySize(int) - Method in interface nxopen.motion.LmsSolverProperty

License requirements: mechanisms ("MECHANISMS")
.

setInteger(int) - Method in interface nxopen.annotations.BaseCustomSymbolBuilder

License requirements: drafting ("DRAFTING")
.

setInteger(String, int) - Method in interface nxopen.blockstyler.PropertyList

Sets the integer value for the given property name.

setInteger(int, int, int) - Method in interface nxopen.ITableEditorDataProvider

Sets integer data at a particular location in the table.

setInteger(int[], int, int) - Method in interface nxopen.ITableEditorDataProvider

Sets integer data on a range of table cells in a specified column.

setInteger(String, int) - Method in interface nxopen.PropertyContainer

Sets the integer value for the given property name.

setInteger(UFVariant, String, int) - Method in interface nxopen.uf.UFUde

Refer to UF_UDE_set_integer for documentation.

setIntegerArrayPropertyValue(String, int[]) - Method in interface nxopen.BasePropertyTable

Sets the integer array value of the property
License requirements: None.

setIntegerArrayValue(String, int[]) - Method in interface nxopen.cam.CAMObject

Set integer array value to the parameter index for the object.

setIntegerCount(int) - Method in interface nxopen.linedesigner.RailingFeatureBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setIntegerDefault(int) - Method in interface nxopen.annotations.MasterSymbolListItemBuilder

License requirements: drafting ("DRAFTING")
.

setIntegerList(String[]) - Method in interface nxopen.AttributeTemplatesBuilder

Sets the integer list.

setIntegerMatrix(String, int, int, int[]) - Method in interface nxopen.blockstyler.PropertyList

Sets the integer matrix for the given property name.

setIntegerMatrix(String, int, int, int[]) - Method in interface nxopen.PropertyContainer

Sets the integer matrix for the given property name.

setIntegerMax(int) - Method in interface nxopen.annotations.MasterSymbolListItemBuilder

License requirements: drafting ("DRAFTING")
.

setIntegerMin(int) - Method in interface nxopen.annotations.MasterSymbolListItemBuilder

License requirements: drafting ("DRAFTING")
.

setIntegerPrecision(int) - Method in interface nxopen.tooling.BomBuilder

License requirements: None.

setIntegerPropertyValue(String, int) - Method in interface nxopen.BasePropertyTable

Sets the integer value of the property
License requirements: None.

setIntegerQuantity(int) - Method in interface nxopen.assemblies.AssembliesGeneralPropertiesBuilder

License requirements: None.

setIntegerQuantity(Component, int) - Method in interface nxopen.assemblies.ComponentAssembly

Sets the integer quantity on this component.

setIntegers(int[]) - Method in interface nxopen.features.UserDefinedFeatureApplicationField

Sets all of the integers stored in this field
License requirements: None.

setIntegers(int[]) - Method in interface nxopen.userdefinedobjects.UserDefinedObject

Sets all of the integers stored with this UDO
License requirements: None.

setIntegers(int, int, int[]) - Method in interface nxopen.userdefinedobjects.UserDefinedObject

Replaces the integers stored with this UDO in the specified range with a new array of integers
License requirements: None.

setIntegerUserAttribute(Tag, String, int, int, boolean) - Method in interface nxopen.uf.UFAttr

Refer to UF_ATTR_set_integer_user_attribute for documentation.

setIntegerValue(int) - Method in interface nxopen.annotations.CustomSymbolTextData

Deprecated.

Deprecated in NX9.0.0. Use MasterSymbolListItemBuilder instead. Use BaseCustomSymbolBuilder.texts() to query list of custom symbol texts.

setIntegerValue(int) - Method in interface nxopen.annotations.PmiAttributeValueIntegerBuilder

License requirements: None.

setIntegerValue(int) - Method in interface nxopen.annotations.PmiIntegerBuilder

License requirements: None.

setIntegerValue(int) - Method in interface nxopen.AttributePropertiesBaseBuilder

License requirements: None.

setIntegerValue(int) - Method in interface nxopen.cam.CAMAttribute

Set the feature attribute integer value for an integer type attribute
License requirements: cam_base ("CAM BASE"), cam_base ("CAM BASE")
.

setIntegerValue(String, int) - Method in interface nxopen.cam.CAMObject

Set an integer value to the parameter index for the object.

setIntegerValue(String, int) - Method in interface nxopen.cam.Cycle

Set the integer value of the parameter
License requirements: cam_base ("CAM BASE")
.

setIntegerValue(int) - Method in interface nxopen.cam.UdeParameter

License requirements: cam_base ("CAM BASE")
.

setIntegerValue(int) - Method in interface nxopen.display.CgfxAttributeValueIntegerBuilder

Deprecated.

Deprecated in NX10.0.0. No alternative provided for this class.

setIntegerValue(UFCamPref.CamPref, int) - Method in interface nxopen.uf.UFCamPref

Refer to UF_CAM_PREF_set_integer_value for documentation.

setIntegerValueOfAttribute(UFVariant, String, int) - Method in interface nxopen.uf.UFMfm

Refer to UF_MFM_set_integer_value_of_attribute for documentation.

setIntegerVector(String, int[]) - Method in interface nxopen.blockstyler.PropertyList

Sets the integer vector for the given property name.

setIntegerVector(String, int[]) - Method in interface nxopen.PropertyContainer

Sets the integer vector for the given property name.

setIntegrationMethod(EvaluationParameters.AnalysisIntegrationMethod) - Method in interface nxopen.cae.responsesimulation.EvaluationParameters

License requirements: nx_response_anlys ("NX Response Analysis")
.

setIntegrationType(MechatronicsBuilder.SolverIntegrationType) - Method in interface nxopen.motion.MechatronicsBuilder

License requirements: mechanisms ("MECHANISMS")
.

setIntegrationTypeOption(DriverOperation.IntegrationType) - Method in interface nxopen.motion.DriverOperation

License requirements: mechanisms ("MECHANISMS")
.

setIntensity(double) - Method in interface nxopen.display.ImageBasedLighting

License requirements: None.

setIntensity(double) - Method in interface nxopen.display.LightBuilder

License requirements: None.

setIntensity(double) - Method in interface nxopen.Light

License requirements: None.

setIntensityDouble(double) - Method in interface nxopen.display.GlobalIlluminationBuilder

License requirements: None.

setIntent(DeltaMoveBuilder.IntentType) - Method in interface nxopen.cam.DeltaMoveBuilder

License requirements: None.

setIntent(ParamValueIntent) - Method in interface nxopen.cam.InheritableToolDepBuilder

License requirements: cam_base ("CAM BASE")
.

setIntent(InspectionDeltaMoveBuilder.IntentType) - Method in interface nxopen.cam.InspectionDeltaMoveBuilder

License requirements: None.

setInteresectionDirectionOption(TrimCurveBuilder.InteresectionDirectionOptions) - Method in interface nxopen.features.TrimCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setInteresectionMethod(TrimCurveBuilder.InteresectionMethods) - Method in interface nxopen.features.TrimCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setInteresectionOptionVector(Direction) - Method in interface nxopen.features.TrimCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setInterferenceColor(NXColor) - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setInterferenceColor(NXColor) - Method in interface nxopen.display.DynamicSectionBuilder

License requirements: None.

setInterferenceColor(NXColor) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setInterferenceFont(PedestrianProtectionBuilder.Font) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setInterferenceLayer(int) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setInterferenceOption(boolean) - Method in interface nxopen.motion.PostProcess

Set interference option for animation/articulation/spreadsheet run
License requirements: mechanisms ("MECHANISMS")
.

setInterferenceText(DisplayableObject, DisplayableObject, String) - Method in interface nxopen.assemblies.ClearanceSet

Associates a text string to an interfering object pair.

setInterferenceType(SimpleInterference.InterferenceMethod) - Method in interface nxopen.geometricanalysis.SimpleInterference

License requirements: None.

setInterferenceType(ResultMeasure.InterferenceType) - Method in interface nxopen.motion.ResultMeasureBuilder

License requirements: mechanisms ("MECHANISMS")
.

setInterferenceWidth(PedestrianProtectionBuilder.Width) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setInterferingSolids(CustomViewSettingsBuilder.Interfering) - Method in interface nxopen.drawings.CustomViewSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setInterferingSolids(boolean) - Method in interface nxopen.drawings.HiddenLinesViewStyle

Deprecated.

Deprecated in NX6.0.0. Use Drawings.HiddenLinesViewStyle#setInterferingSolidsOption instead.

setInterferingSolids(HiddenLineInterferingSolidsOption) - Method in interface nxopen.drawings.ViewStyleHiddenLinesBuilder

License requirements: drafting ("DRAFTING")
.

setInterferingSolids(boolean) - Method in interface nxopen.preferences.HiddenLinesViewPreferences

Deprecated.

Deprecated in NX6.0.0. Use Preferences.HiddenLinesViewPreferences#setInterferingSolidsOption instead.

setInterferingSolidsOption(HiddenLineInterferingSolidsOption) - Method in interface nxopen.drawings.HiddenLinesViewStyle

Sets the status of interfering solids.

setInterferingSolidsOption(HiddenLineInterferingSolidsOption) - Method in interface nxopen.preferences.HiddenLinesViewPreferences

Sets the status of interfering solids.

setInterfText(Tag, Tag, Tag, String) - Method in interface nxopen.uf.UFClear

Deprecated.

The equivalent Open C method has retired

setInteriorCurveType(StyledCornerBuilder.InteriorCurveTypes) - Method in interface nxopen.features.StyledCornerBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setInteriorCutout(boolean) - Method in interface nxopen.features.sheetmetal.ExportFlatPatternBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setInteriorExteriorType(FluidDomainBuilder.IntExtType) - Method in interface nxopen.cae.FluidDomainBuilder

License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")
.

setInteriorFeature(boolean) - Method in interface nxopen.features.sheetmetal.ExportFlatPatternBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setInteriorPoint(Point) - Method in interface nxopen.cae.FluidDomainBuilder

License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")
.

setInteriorPoint1(Point) - Method in interface nxopen.features.GeneralConicBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setInteriorPoint2(Point) - Method in interface nxopen.features.GeneralConicBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setInteriorPoint3(Point) - Method in interface nxopen.features.GeneralConicBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setInteriorPosition(Point3d) - Method in interface nxopen.features.OffsetSurfaceBuilder

Sets the offset surface interior position for specify interior position method.

setInterLaminarFailureTheory(LaminatePly.InterLaminarFailureTheoryType) - Method in interface nxopen.cae.LaminatePly

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setIntermediateDeck(DirectionOption, IProfile[]) - Method in interface nxopen.die.DeckParentBuilder

Sets the intermediate deck profile of the deck.

setIntermediateDeckOrientation(ISurface) - Method in interface nxopen.die.DeckParentBuilder

Sets the intermediate deck orientation of the deck.

setIntermediateDensity(int) - Method in interface nxopen.geometricutilities.CombOptionsBuilder

License requirements: None.

setIntermediateFrequenciesBetweenOption(LaminateSineEventBuilder.IntermediateFrequeciesBetweenEnum) - Method in interface nxopen.cae.LaminateSineEventBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setIntermediateFrequenciesCluster(double) - Method in interface nxopen.cae.LaminateSineEventBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setIntermediateFrequenciesEnable(boolean) - Method in interface nxopen.cae.LaminateSineEventBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setIntermediateFrequenciesIncludeNatFreq(boolean) - Method in interface nxopen.cae.LaminateSineEventBuilder

Deprecated.

Deprecated in NX11.0.0. This function has no replacement. The IntermediateFrequenciesIncludeNatFreq property is simply not supported by the Sine Event solver and has never been. This parameter is useless.

setIntermediateFrequenciesNumExcitations(int) - Method in interface nxopen.cae.LaminateSineEventBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setIntermediateFrequenciesNumIncrements(int) - Method in interface nxopen.cae.LaminateSineEventBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setIntermediateFrequenciesOption(LaminateSineEventBuilder.IntermediateFrequeciesEnum) - Method in interface nxopen.cae.LaminateSineEventBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setIntermediateNamingRule(String) - Method in interface nxopen.tooling.IntermediateStageBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setIntermediatePoint(Point) - Method in interface nxopen.cam.InspectionCmmCommandBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setIntermediateRename(boolean) - Method in interface nxopen.tooling.IntermediateStageBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setInternal(boolean) - Method in interface nxopen.features.shipdesign.SteelCollarPlateBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setInternalFrameAnchorName(String) - Method in interface nxopen.routing.PlatformCreatorBuilder

License requirements: routing_platform ("Routing Platform")
.

setInterNamingRule(String) - Method in interface nxopen.tooling.DirectUnfoldBuilder

License requirements: None.

setInterpart(boolean) - Method in interface nxopen.features.WrapGeometryBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setInterpart(boolean) - Method in interface nxopen.ScCollector

Sets inter-part status
This function sets the value of interpart flag on ScCollector.

setInterpart(boolean) - Method in interface nxopen.Section

Set inter-part state of section and make it empty.

setInterpartData(boolean, LoadOptions.Parent) - Method in interface nxopen.LoadOptions

Sets the interpart data option which, when turned on, loads parts that are mated or contain interpart expressions, as well as those with WAVE data.

setInterpartDelay(boolean) - Method in interface nxopen.Update

License requirements: None.

setInterpartPositioning(boolean) - Method in interface nxopen.preferences.SessionAssemblies

Sets the option to allow interpart geometry selection in the assembly constraints dialog
License requirements: None.

setInterpartSelectionAsString(String) - Method in interface nxopen.blockstyler.BodyCollector

License requirements: None.

setInterpartSelectionAsString(String) - Method in interface nxopen.blockstyler.CurveCollector

License requirements: None.

setInterpartSelectionAsString(String) - Method in interface nxopen.blockstyler.FaceCollector

License requirements: None.

setInterpartSelectionAsString(String) - Method in interface nxopen.blockstyler.SectionBuilder

License requirements: None.

setInterpartSelectionAsString(String) - Method in interface nxopen.blockstyler.SelectObject

License requirements: None.

setInterpartSelectionAsString(String) - Method in interface nxopen.blockstyler.SpecifyCSYS

License requirements: None.

setInterpartSelectionAsString(String) - Method in interface nxopen.blockstyler.SpecifyPlane

License requirements: None.

setInterpartSelectionAsString(String) - Method in interface nxopen.blockstyler.SpecifyPoint

License requirements: None.

setInterpartSelectionAsString(String) - Method in interface nxopen.blockstyler.SpecifyVector

License requirements: None.

setInterpartSelectionAsString(String) - Method in interface nxopen.blockstyler.SuperPoint

License requirements: None.

setInterpartSelectionAsString(String) - Method in interface nxopen.blockstyler.SuperSection

License requirements: None.

setInterpartSourceEdge(Edge) - Method in interface nxopen.features.AngularDimBuilder

Sets the interpart source edge
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setInterpMethod(LaserProfileMove.InterpMethods) - Method in interface nxopen.cam.LaserProfileMove

License requirements: cam_base ("CAM BASE")
.

setInterpolated(boolean) - Method in interface nxopen.cae.ResultParametersWithProbe

Set interpolated
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setInterpolation(AfuData.InterpolationType) - Method in interface nxopen.cae.AfuData

Sets the interpolation type
License requirements: nx_ftk ("NX Advanced Graphing")
.

setInterpolation(int) - Method in interface nxopen.fields.FieldTable

Deprecated.

Deprecated in NX7.5.2. Use FieldTable.interpolationMethod() and FieldTable.setInterpolationMethod(nxopen.fields.FieldEvaluator.InterpolationEnum) instead.

setInterpolationMethod(InterpolationMethod) - Method in interface nxopen.cae.responsesimulation.RSEventAttributes

License requirements: nx_response_anlys ("NX Response Analysis")
.

setInterpolationMethod(ToolAxisInterpolate.InterpolationMethodTypes) - Method in interface nxopen.cam.ToolAxisInterpolate

License requirements: cam_base ("CAM BASE")
.

setInterpolationMethod(SubdivideFacetBodyBuilder.InterpolationMethodType) - Method in interface nxopen.facet.SubdivideFacetBodyBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setInterpolationMethod(FieldEvaluator.InterpolationEnum) - Method in interface nxopen.fields.FieldEvaluator

License requirements: None.

setInterpolationMethod(FieldEvaluator.InterpolationEnum) - Method in interface nxopen.fields.FieldTable

License requirements: None.

setInterpolationMethodOption(FrequencyDefinition.InterpolationMethod) - Method in interface nxopen.cae.responsesimulation.FrequencyDefinition

License requirements: nx_response_anlys ("NX Response Analysis")
.

setInterpolationOption(SweptBuilder.InterpolationOptions) - Method in interface nxopen.features.SweptBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setInterpResult(UFVariant, String) - Method in interface nxopen.uf.UFDbcMld

Refer to UF_DBC_MLD_set_interp_result for documentation.

setInterpretContactContour(boolean) - Method in interface nxopen.cam.SimulationOptionsBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setInterRenameComp(boolean) - Method in interface nxopen.tooling.DirectUnfoldBuilder

License requirements: None.

setInterruptUpdateOnError(boolean) - Method in interface nxopen.preferences.SessionModeling

Sets the option "Interrupt Update on Error" gives choice, whether the user wants the "Edit During Update" dialog to appear when features contain errors during feature update/playback.

setInterruptUpdateOnMissingReferences(boolean) - Method in interface nxopen.preferences.SessionModeling

Sets the option "Interrupt Update on Missing References" gives choice, whether the user wants the "Edit During Update" dialog to appear when features contain missing references during feature update/playback.

setInterruptUpdateOnWarning(boolean) - Method in interface nxopen.preferences.SessionModeling

Sets the option "Interrupt Update on Warning" gives choice, whether the user wants the "Edit During Update" dialog to appear when features contain warnings during feature update/playback.

setIntersectedObjects(TaggedObject[]) - Method in interface nxopen.display.PlanarShipGridBuilder

Set the objects that are to be searched to find intersections with the plane.

setIntersectionReference(Point) - Method in interface nxopen.geometricutilities.BoundingObjectBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setIntersectionSplitSystem(boolean) - Method in interface nxopen.features.shipdesign.SeamBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setIntersectionStrategy(HoleDrillingBuilder.IntersectionStrategyType) - Method in interface nxopen.cam.HoleDrillingBuilder

License requirements: cam_base ("CAM BASE")
.

setInterSectionsType(ShipIntersectionsBuilder.CreationType) - Method in interface nxopen.features.shipdesign.ShipIntersectionsBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setIntersectionSymbolCfw(LineCfw) - Method in interface nxopen.annotations.SymbolPreferences

Sets the intersection symbol color, font, and width
License requirements: None.

setIntersectionSymbolColor(NXColor) - Method in interface nxopen.annotations.SymbolStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setIntersectionSymbolFont(DisplayableObject.ObjectFont) - Method in interface nxopen.annotations.SymbolStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setIntersectionSymbolWidth(LineWidth) - Method in interface nxopen.annotations.SymbolStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setIntersectionTolerance(double) - Method in interface nxopen.features.StudioSurfaceBuilder

License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

setIntersectionTolerance(double) - Method in interface nxopen.features.ThroughCurveMeshBuilder

License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

setIntersectPlane(Plane) - Method in interface nxopen.tooling.BendInsertDesignBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setIntersectType(PlanarShipGridBuilder.IntersectOption) - Method in interface nxopen.display.PlanarShipGridBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setIntersectType(GeodesicIntersectBuilder.Type) - Method in interface nxopen.features.GeodesicIntersectBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setInterSolid(boolean) - Method in interface nxopen.tooling.ElectrodeCheckingBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setInterTransFrameEnum(ShipIntersectionsBuilder.Type) - Method in interface nxopen.features.shipdesign.ShipIntersectionsBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setInterTransverseFrames(boolean) - Method in interface nxopen.annotations.BaseFrameBarBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setInterTransverseFramesExtendBegin(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setInterTransverseFramesExtendColor(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setInterTransverseFramesExtendFont(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setInterTransverseFramesExtendFrequency(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setInterTransverseFramesExtendLength(double) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setInterTransverseFramesExtendWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setInterTransverseFramesLabelColor(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setInterTransverseFramesLabelFont(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setInterTransverseFramesLabelItalicized(boolean) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setInterTransverseFramesLabelName(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setInterTransverseFramesLabelWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setInterTransverseFramesSkipLabelBegin(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setInterTransverseFramesSkipLabelFrequency(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setInterTransverseFramesSkipTicBegin(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setInterTransverseFramesSkipTicFrequency(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setInterTransverseFramesTicColor(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setInterTransverseFramesTicDisplay(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setInterTransverseFramesTicFont(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setInterTransverseFramesTicLength(double) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setInterTransverseFramesTicWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setInterval1(double) - Method in interface nxopen.geometricanalysis.sectionanalysis.GridSpacingBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setInterval2(double) - Method in interface nxopen.geometricanalysis.sectionanalysis.GridSpacingBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setIntNumVents(int) - Method in interface nxopen.features.shipdesign.VentilationHoles2Builder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setIntol(double) - Method in interface nxopen.cam.GeometrySet

License requirements: cam_base ("CAM BASE")
.

setIntol(double) - Method in interface nxopen.cam.SurfaceDriveGeometrySet

License requirements: cam_base ("CAM BASE")
.

setIntol(double) - Method in interface nxopen.cam.WedmBasedGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setIntol(double) - Method in interface nxopen.cam.WedmCutParameters

License requirements: cam_base ("CAM BASE")
.

setIntrapartPartModuleDelay(boolean) - Method in interface nxopen.Update

License requirements: None.

setIntroductoryTemplate(String) - Method in interface nxopen.drafting.DrawingCreationWizardBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setIntUgAttribute(UFVariant, String, int) - Method in interface nxopen.uf.UFMfm

Refer to UF_MFM_set_int_ug_attribute for documentation.

setIntValue(Expression) - Method in interface nxopen.mechatronics.ProxyObjectParameterBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setIntValue(int) - Method in interface nxopen.SpreadsheetCellData

License requirements: None.

setIntValue(Tag, int, int) - Method in interface nxopen.uf.UFParam

Refer to UF_PARAM_set_int_value for documentation.

setIntVla(Tag, int, int, int[]) - Method in interface nxopen.uf.UFParam

Refer to UF_PARAM_set_int_vla for documentation.

setInvalidSequenceCharacters(String) - Method in interface nxopen.preferences.RoutingPart

Sets the list of characters that cannot be used when generating sequences of terminals in qualify part.

setInverse(boolean) - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setInverseBending(boolean) - Method in interface nxopen.features.shipdesign.ProfileListBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setInverseKinematicsOrientation(Matrix3x3) - Method in interface nxopen.features.HumanBuilder

License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setInverseKinematicsPosition(Point3d) - Method in interface nxopen.features.HumanBuilder

License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setInverseKinematicsType(HumanData.InverseKinematicsType) - Method in interface nxopen.features.HumanBuilder

License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setInvertSymbol(boolean) - Method in interface nxopen.annotations.BaseSurfaceFinish

Set the invert symbol flag for symbol having flag type leader.

setInvertSymbol(boolean) - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder

License requirements: drafting ("DRAFTING")
.

setInvertSymbol(boolean) - Method in interface nxopen.annotations.SurfaceFinishBuilder

License requirements: None.

setInvertText(boolean) - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder

License requirements: drafting ("DRAFTING")
.

setInvertText(boolean) - Method in interface nxopen.annotations.SurfaceFinishBuilder

License requirements: None.

setInvokeExport(boolean) - Method in interface nxopen.mechatronics.PreferencesBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setIOStatus(boolean) - Method in interface nxopen.mechatronics.GanttOperationParameterBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setIpwColor(NXColor) - Method in interface nxopen.cam.SimulationOptionsBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setIpwNeedleCountCoarse(int) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setIpwNeedleCountFine(int) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setIpwNeedleCountMedium(int) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setIpwNeedleDistanceCoarse(double) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setIpwNeedleDistanceFine(double) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setIpwNeedleDistanceMedium(double) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setIpwPartsFolder(String) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setIpwPositionCsys(CoordinateSystem) - Method in interface nxopen.cam.GeometryGroup

License requirements: cam_base ("CAM BASE")
.

setIpwPositionType(GeometryGroup.PositionTypes) - Method in interface nxopen.cam.GeometryGroup

License requirements: cam_base ("CAM BASE")
.

setIpwResolution(SimulationOptionsBuilder.Resolution) - Method in interface nxopen.cam.SimulationOptionsBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setIpwToleranceMode(Preferences.IpwToleranceModeTypes) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setIpwType(CutParametersIpwTypes) - Method in interface nxopen.cam.CutParameters

License requirements: cam_base ("CAM BASE")
.

setIpwUseDirectoryOfOriginalPart(boolean) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setIRayPlusStudioshowStatusIndicator(boolean) - Method in interface nxopen.display.IRayPlusStudioEditorBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setIRayPlusStudioStaticImageDotsPerInch(int) - Method in interface nxopen.display.IRayPlusStudioEditorBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setIRayPlusStudioStaticImageDoubleHeight(double) - Method in interface nxopen.display.IRayPlusStudioEditorBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setIRayPlusStudioStaticImageDoubleWidth(double) - Method in interface nxopen.display.IRayPlusStudioEditorBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setIRayPlusStudioStaticImageFileFormat(IRayPlusStudioEditorBuilder.IRayPlusStudioStaticImageFileFormatType) - Method in interface nxopen.display.IRayPlusStudioEditorBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setIRayPlusStudioStaticImageLockAspectRatio(boolean) - Method in interface nxopen.display.IRayPlusStudioEditorBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setIRayPlusStudioStaticImageOrientation(IRayPlusStudioEditorBuilder.IRayPlusStudioStaticImageOrientationType) - Method in interface nxopen.display.IRayPlusStudioEditorBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setIRayPlusStudioStaticImagePixelHeight(int) - Method in interface nxopen.display.IRayPlusStudioEditorBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setIRayPlusStudioStaticImagePixelWidth(int) - Method in interface nxopen.display.IRayPlusStudioEditorBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setIRayPlusStudioStaticImageResolution(IRayPlusStudioEditorBuilder.IRayPlusStudioStaticImageResolutionType) - Method in interface nxopen.display.IRayPlusStudioEditorBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setIRayPlusStudioStaticImageSize(IRayPlusStudioEditorBuilder.IRayPlusStudioStaticImageSizeType) - Method in interface nxopen.display.IRayPlusStudioEditorBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setIRayPlusStudioStaticImageUnits(IRayPlusStudioEditorBuilder.IRayPlusStudioStaticImageUnitsType) - Method in interface nxopen.display.IRayPlusStudioEditorBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setIs2DMode(boolean) - Method in interface nxopen.blockstyler.SpecifyVector

License requirements: None.

setIs3DCurves(boolean) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setIsBsplineSimplifiedInFlatSolid(boolean, boolean) - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign

Sets the flag indicating whether or not B-Splines are simplified as part of the Flat Solid creation
License requirements: nx_flexible_pcb ("NX Flexible PCB")
.

setIsBsplineSimplifiedInFlatSolid(boolean, boolean) - Method in interface nxopen.preferences.PartSheetmetal

SETS the flag indicating whether or not B-Splines are simplified as part of the Flat Solid creation
License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setIsDirectionFlipped(boolean) - Method in interface nxopen.features.SilhouetteFlangeBuilder

Sets a flag indicating if the direction is flipped.

setIsDragAllowedHandler(Tree.IsDragAllowedCallback) - Method in interface nxopen.blockstyler.Tree

Sets the callback handler for node drag
License requirements: None.

setIsDropAllowedHandler(Tree.IsDropAllowedCallback) - Method in interface nxopen.blockstyler.Tree

Sets the callback handler for node drop
License requirements: None.

setIsEccentricModeSelected(boolean) - Method in interface nxopen.routing.LinearPathBuilder

Set the boolean value specifies that Eccentric mode selected or not
License requirements: routing_base ("Routing Basic")
.

setIslandCleanupStatus(boolean) - Method in interface nxopen.cam.DmBndBuilder

License requirements: None.

setIslandMargin(double) - Method in interface nxopen.annotations.HatchStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setIsNewControlPointRequired(boolean) - Method in interface nxopen.routing.LinearPathBuilder

Set the boolean value specifies that new control point required or not
License requirements: routing_base ("Routing Basic")
.

setIsOccurrenceableFlag(boolean) - Method in interface nxopen.userdefinedobjects.UserDefinedClass

Sets the is occurrenceable flag for this class.

setIsoclineAngle(double) - Method in interface nxopen.cam.SurfaceRegions

License requirements: cam_base ("CAM BASE")
.

setIsoclineTypes(IsoclineCurveBuilder.CurveTypes) - Method in interface nxopen.features.IsoclineCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setIsoclineVector(Direction) - Method in interface nxopen.geometricanalysis.HighlightLinesAnalysisBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setIsometricView(boolean) - Method in interface nxopen.drawings.ViewCreationWizardBuilder

License requirements: drafting ("DRAFTING")
.

setIsoparameterLineOriented(boolean) - Method in interface nxopen.features.FaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setIsoparametricDirection(SelectDividingObjectBuilder.IsoparametricDirectionType) - Method in interface nxopen.geometricutilities.SelectDividingObjectBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setIsoTypeOption(TBSSmoothBuilder.IsoType) - Method in interface nxopen.cae.optimization.TBSSmoothBuilder

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setIsoUShapeControlMethods(StyledCornerBuilder.ShapeControlMethodsTypes) - Method in interface nxopen.features.StyledCornerBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setIsoValue(double) - Method in interface nxopen.cae.optimization.TBSSmoothBuilder

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setIsoVShapeControlMethods(StyledCornerBuilder.ShapeControlMethodsTypes) - Method in interface nxopen.features.StyledCornerBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setIsPartSymbol(boolean) - Method in interface nxopen.annotations.MasterSymbolBuilder

Sets if it is part symbol
License requirements: drafting ("DRAFTING")
.

setIsReferenceNode(boolean) - Method in interface nxopen.cae.ResultParameters

Sets the flag if the reference node will be used for result
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setIsSideFlipped(boolean) - Method in interface nxopen.features.SilhouetteFlangeBuilder

Sets a value indicating whether to flip the side.

setIsSmartGroupDateEnabled(Classifier, boolean) - Method in interface nxopen.visualreporting.Rule

The Classifier.DateGroupMethodOption in this Classifier in the Rule will be determined by the overall date range of all reported objects.

setIsStepOkayHandler(Wizard.IsStepOkayCallback) - Method in interface nxopen.blockstyler.Wizard

Sets the IsStepOkay handler.

setIsSystemGeneratedBendReliefRemovedInFlatSolid(boolean, boolean) - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign

Sets the flag indicating whether or not system generated bend releifs are removed as part of the Flat Solid creation
License requirements: nx_flexible_pcb ("NX Flexible PCB")
.

setIsSystemGeneratedBendReliefRemovedInFlatSolid(boolean, boolean) - Method in interface nxopen.preferences.PartSheetmetal

SETS the flag indicating whether or not system generated bend releifs are removed as part of the Flat Solid creation
License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setIsTerminalSegment(Terminal) - Method in interface nxopen.routing.ISegment

Set given segment to be a terminal segment?

setIsUPeriodic(int, boolean) - Method in interface nxopen.geometricutilities.ControlPoleManagerData

Sets periodicity in U direction of a group of poles
License requirements: studio_free_form ("STUDIO FREE FORM")
.

setIsVPeriodic(int, boolean) - Method in interface nxopen.geometricutilities.ControlPoleManagerData

Sets periodicity in V direction of a group of poles
License requirements: studio_free_form ("STUDIO FREE FORM")
.

setIswitchDefinition(TirePropertyTnoBuilder.IswitchDefinitionType) - Method in interface nxopen.motion.TirePropertyTnoBuilder

License requirements: mechanisms ("MECHANISMS")
.

setItemAttributes(MATLABClientBuilder.TagAttribute[]) - Method in interface nxopen.mechatronics.MATLABClientBuilder

Set the attribute of MATLAB items
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setItemAttributes(OPCClientBuilder.TagAttribute[]) - Method in interface nxopen.mechatronics.OPCClientBuilder

Set the attribute of OPC items
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setItemChecked(int, boolean) - Method in interface nxopen.blockstyler.TreeListMenu

Sets the checked status for given menu item
License requirements: None.

setItemDefault(int, boolean) - Method in interface nxopen.blockstyler.TreeListMenu

Sets the flag indicating whether the given menu item is default
License requirements: None.

setItemDialogLaunching(int, boolean) - Method in interface nxopen.blockstyler.TreeListMenu

Sets the flag indicating whether the given menu item is dialog lanching
License requirements: None.

setItemDisable(int, boolean) - Method in interface nxopen.blockstyler.TreeListMenu

Sets the flag indicating whether the given menu item is disabled
License requirements: None.

setItemFlipFlag(boolean) - Method in interface nxopen.ExpressionCollectorSet

License requirements: None.

setItemFlipFlag(boolean) - Method in interface nxopen.ExpressionSectionSet

License requirements: None.

setItemHidden(int, boolean) - Method in interface nxopen.blockstyler.TreeListMenu

Sets the flag indicating whether the given menu item is hidden
License requirements: None.

setItemIcon(int, String) - Method in interface nxopen.blockstyler.TreeListMenu

Sets the icon for given menu item
License requirements: None.

setItemID(String) - Method in interface nxopen.mechatronics.ObjectInformationBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setItemIndex(int) - Method in interface nxopen.ExpressionCollectorSet

License requirements: None.

setItemIndex(int) - Method in interface nxopen.ExpressionSectionSet

License requirements: None.

setItemIndex(int) - Method in interface nxopen.tooling.FamilyMoldBuilder

License requirements: None.

setItemName(String) - Method in interface nxopen.annotations.MasterSymbolBuilder

Deprecated.

Deprecated in NX10.0.0. Use PartOperationCreateBuilder instead.

setItemName(String) - Method in interface nxopen.annotations.PartIdentificationBuilder

License requirements: None.

setItemName(String) - Method in interface nxopen.annotations.SymbolCatalogBuilder

Deprecated.

Deprecated in NX10.0.0. Use PartOperationCreateBuilder instead.

setItemName(String) - Method in interface nxopen.cam.WorkInstructionBuilder

License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.

setItemName(String) - Method in interface nxopen.mechatronics.ObjectInformationBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setItemName(String, String) - Method in interface nxopen.tooling.FastenerAssy

Adds item description for the part
License requirements: None.

setItemName(String) - Method in interface nxopen.tooling.SelectReuseLibraryListBuilder

License requirements: None.

setItemName(int[]) - Method in interface nxopen.tooling.ShimBuilder

Sets the item name of Set List
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setItemNameModifier(String) - Method in interface nxopen.annotations.PartIdentificationBuilder

License requirements: None.

setItemNumber(String) - Method in interface nxopen.annotations.MasterSymbolBuilder

Deprecated.

Deprecated in NX10.0.0. Use PartOperationCreateBuilder instead.

setItemNumber(String) - Method in interface nxopen.annotations.SymbolCatalogBuilder

Deprecated.

Deprecated in NX10.0.0. Use PartOperationCreateBuilder instead.

setItemRevisionName(String) - Method in interface nxopen.linedesigner.RenameItemRevisionBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setItemRevisionName(Part, String) - Method in interface nxopen.linedesigner.UINodeUtils

To Set ItemRevisionName attribute value
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setItems(String[]) - Method in interface nxopen.uistyler.OptionMenu

Set an array of items
License requirements: None.

setItems(String[]) - Method in interface nxopen.uistyler.OptionToggle

Sets items in the array
License requirements: None.

setItemSelection(int, TaggedObject) - Method in interface nxopen.routing.PlacePartBuilder

Set a flag which tells the builder from where the part being placed was selected and the tag of the selected part.

setItemText(UIBlock, String[]) - Method in interface nxopen.blockstyler.SetList

Sets the text for the specified item.

setItemText(int, String) - Method in interface nxopen.blockstyler.TreeListMenu

Sets the display text for given menu item
License requirements: None.

setItemType(MarkAsTemplateBuilder.ItemTypeEnum) - Method in interface nxopen.drawings.MarkAsTemplateBuilder

License requirements: drafting ("DRAFTING")
.

setItemType(String) - Method in interface nxopen.features.shipdesign.SteelDistributionBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setItemType(String) - Method in interface nxopen.FileNew

License requirements: None.

setItemType(String) - Method in interface nxopen.pdm.PartOperationCreateBuilder

Sets the selected Item Type
License requirements: None.

setItemType(RunItem.Type) - Method in interface nxopen.routing.RunItem

Sets the Run Item type such as "From", "To", or "Member" item.

setItemType(String, String) - Method in interface nxopen.uf.UFClone

Refer to UF_CLONE_set_item_type for documentation.

setItemTypes(String) - Method in interface nxopen.mechatronics.ObjectInformationBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setItemValue(int) - Method in interface nxopen.uistyler.ColorTool

Sets the item value
License requirements: None.

setItemValue(int) - Method in interface nxopen.uistyler.IntegerItem

Sets the value obtained from the text field.

setItemValue(int) - Method in interface nxopen.uistyler.IntegerScale

Sets
License requirements: None.

setItemValue(int) - Method in interface nxopen.uistyler.OptionMenu

Sets the item value
License requirements: None.

setItemValue(int, boolean) - Method in interface nxopen.uistyler.OptionToggle

Sets item value
License requirements: None.

setItemValue(int) - Method in interface nxopen.uistyler.RadioBox

Sets the item value
License requirements: None.

setItemValue(double) - Method in interface nxopen.uistyler.RealItem

Sets the item value
License requirements: None.

setItemValue(double) - Method in interface nxopen.uistyler.RealScale

Sets the item value
License requirements: None.

setItemValue(String) - Method in interface nxopen.uistyler.StringItem

Sets the string value for this dialog item.

setItemValue(boolean) - Method in interface nxopen.uistyler.Toggle

Sets an item value
License requirements: None.

setItemValue(int) - Method in interface nxopen.uistyler.ToolPalette

Sets the currently selected choice for this dialog item.

setItemValue(String) - Method in interface nxopen.uistyler.WideString

Sets the string value for this dialog item.

setItemValues(String[]) - Method in interface nxopen.uistyler.MultiTextBox

Specifies the text for this dialog item.

setIteration(int) - Method in interface nxopen.cae.DurabilityFunctionExcitationBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setIteration(int) - Method in interface nxopen.cae.DurabilityLoadPatternBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setIteration(BaseIteration) - Method in interface nxopen.cae.FreeBodyResultsBuilder

The iteration containing the grid point force results
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setIteration(ResultProbeBuilder.IterationSelection) - Method in interface nxopen.cae.ResultProbeBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setIteration(int) - Method in interface nxopen.facet.MultiPatchAlignmentBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setIterationCount(int) - Method in interface nxopen.features.GlobalShapingBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setIterationIndex(int) - Method in interface nxopen.cae.ResultProbeBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setIterationNumbers(int) - Method in interface nxopen.cae.optimization.TBSTopologyControllerOptimizationParameters

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setIterationStepSpacing(int) - Method in interface nxopen.cae.PostGraphAcrossIterationsBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setIterationTypeOption(ResultProbeBuilder.IterationType) - Method in interface nxopen.cae.ResultProbeBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setIterationValue(double) - Method in interface nxopen.cae.ResultParametersWithProbe

Set interpolated iteration value
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setIterationValueOption(PostGraphAcrossIterationsBuilder.IterationLabelingOption) - Method in interface nxopen.cae.PostGraphAcrossIterationsBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setIterativeMax(int) - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setIterativeRotation(double) - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setIterativeToggle(boolean) - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setIterativeTranslation(double) - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setIterativeType(InspectionAlignmentAssistantBuilder.IterativeTypes) - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setIterConvergeVar(String) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setIterDev(double) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setIterDevType(InspectionAlignmentBuilder.IterDevTypes) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setIterGroupName(String) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setIterMax(int) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setIterNearValue(double) - Method in interface nxopen.cae.ResultProbeBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setIxx(double) - Method in interface nxopen.motion.LinkMassProperty

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using LinkMassProperty.ixxExpression() to query or edit it.

setIxy(double) - Method in interface nxopen.motion.LinkMassProperty

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using LinkMassProperty.ixyExpression() to query or edit it.

setIxz(double) - Method in interface nxopen.motion.LinkMassProperty

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using LinkMassProperty.ixzExpression() to query or edit it.

setIyy(double) - Method in interface nxopen.motion.LinkMassProperty

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using LinkMassProperty.iyyExpression() to query or edit it.

setIyz(double) - Method in interface nxopen.motion.LinkMassProperty

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using LinkMassProperty.iyzExpression() to query or edit it.

setIzz(double) - Method in interface nxopen.motion.LinkMassProperty

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using LinkMassProperty.izzExpression() to query or edit it.

setJ(double) - Method in interface nxopen.cam.InspectionMeasurePointBuilder

License requirements: None.

setJacobian(double) - Method in interface nxopen.cae.MappedMeshBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setJacobianToggle(boolean) - Method in interface nxopen.cae.ElementSplitBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setJacobianValue(double) - Method in interface nxopen.cae.ElementSplitBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setJama(boolean) - Method in interface nxopen.IgesCreator

License requirements: None.

setJama(boolean) - Method in interface nxopen.NXTo2dCreator

License requirements: None.

setJCurve(NXObject[]) - Method in interface nxopen.motion.CurveOnCurveBuilder

Sets second curves
License requirements: mechanisms ("MECHANISMS")
.

setJDirectionBuilder(double) - Method in interface nxopen.cam.MachineHeadGroupBuilder

License requirements: cam_base ("CAM BASE")
.

setJerkLimit(double) - Method in interface nxopen.sim.KinematicAxisBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setJLine(double) - Method in interface nxopen.cam.InspectionLineFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setJNormal(double) - Method in interface nxopen.cam.InspectionLineFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setJobName(String) - Method in interface nxopen.PlotBuilder

License requirements: None.

setJobRunInForeground(boolean) - Method in interface nxopen.cae.optimization.TBSOutputControlOptions

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setJoggle(EmbossJoggle) - Method in interface nxopen.features.EmbossSidewall

Sets the sidewall joggle
License requirements: solid_modeling ("SOLIDS MODELING")
.

setJoggleCompensation(boolean) - Method in interface nxopen.features.sheetmetal.AeroJoggleBuilder

License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setJoggleDepthThreshold(boolean, String) - Method in interface nxopen.preferences.PartAeroSheetmetal

THE joggle depth threshold value
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setJoggleDistanceThreshold(boolean, String) - Method in interface nxopen.preferences.PartAeroSheetmetal

THE joggle distance threshold value
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setJoggleIn(boolean) - Method in interface nxopen.features.sheetmetal.AeroJoggleBuilder

License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setJoggleOffsetRadius(boolean, String) - Method in interface nxopen.preferences.PartAeroSheetmetal

The joggle offset radius value
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setJoggleStationaryRadius(boolean, String) - Method in interface nxopen.preferences.PartAeroSheetmetal

THE joggle stationary radius value string
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setJogWall(boolean) - Method in interface nxopen.die.MachineReliefBuilder

License requirements: ug_die_design ("Die Design")
.

setJoinCurves(boolean) - Method in interface nxopen.SketchIntersectionCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setJoinedSelectedCurves(Curve[]) - Method in interface nxopen.tooling.DieEngTrimAngleCheckBuilder

Set the joined trimming curves.

setJoinIsocline(boolean) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setJoinOption(CompositeCurveBuilder.JoinMethod) - Method in interface nxopen.features.CompositeCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setJoinOutputCurves(boolean) - Method in interface nxopen.die.CompensateRoughDataBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setJoint(PhysicsJoint) - Method in interface nxopen.mechatronics.BreakingConstraintBuilder

Sets the joint.

setJoint(Tag, UFMotion.Joint) - Method in interface nxopen.uf.UFMotion

Refer to UF_MOTION_set_joint for documentation.

setJointAngleReport(boolean) - Method in interface nxopen.features.vehicledesign.ManikinBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setJointChanged(Curve, boolean) - Method in interface nxopen.weld.WeldJointBuilder

Indicate that joint was changed.

setJointCoupler(Tag, UFMotion.JointCoupler) - Method in interface nxopen.uf.UFMotion

Refer to UF_MOTION_set_joint_coupler for documentation.

setJointData(HumanData.JointType, double, double, double, boolean) - Method in interface nxopen.features.HumanBuilder

Set joint data
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setJointLimits(HumanData.JointType, double, double, double, double, double, double, boolean) - Method in interface nxopen.features.HumanBuilder

Set joint limits
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setJointLimits(Tag, UFMotion.JointLimits) - Method in interface nxopen.uf.UFMotion

Refer to UF_MOTION_set_joint_limits for documentation.

setJointMethod(ElectrodeBlankBuilder.JointObject) - Method in interface nxopen.tooling.ElectrodeBlankBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setJointMotionInput(Tag, UFMotion.JointMotionInput) - Method in interface nxopen.uf.UFMotion

Refer to UF_MOTION_set_joint_motion_input for documentation.

setJointPrefix(String) - Method in interface nxopen.weld.WeldJointBuilder

License requirements: structure_weld ("STRUCTURE WELD")
.

setJointsLimits(boolean) - Method in interface nxopen.motion.ArticulationControl

License requirements: mechanisms ("MECHANISMS")
.

setJointsLimits(boolean) - Method in interface nxopen.motion.SpreadsheetRunControl

License requirements: mechanisms ("MECHANISMS")
.

setJointType(JointDefine.Type) - Method in interface nxopen.motion.JointDefine

Sets the joint type
License requirements: mechanisms ("MECHANISMS")
.

setJointWizardStatus(MotionEnvironment.JointWizardStatus) - Method in interface nxopen.motion.MotionEnvironment

Sets the on-off status of joint wizard
License requirements: mechanisms ("MECHANISMS")
.

setJounceDistance(double) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setJournalFileFormat(SessionUserInterface.JournalFileFormatType) - Method in interface nxopen.preferences.SessionUserInterface

Sets the journal file format
License requirements: None.

setJournaling(boolean) - Method in interface nxopen.pdm.SessionSettings

License requirements: None.

setJournalLanguage(SessionUserInterface.JournalLanguageType) - Method in interface nxopen.preferences.SessionUserInterface

Sets the journal language.

setJournalState(int) - Method in interface nxopen.uf.UFPs

Refer to UF_PS_set_journal_state for documentation.

setJtdatasetname(String) - Method in interface nxopen.cae.PostJtExportBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setJtfilename(String) - Method in interface nxopen.cae.PostJtExportBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setJtfileStructure(JtCreator.FileStructure) - Method in interface nxopen.JtCreator

License requirements: None.

setJTGeometryTolerance(double) - Method in interface nxopen.drawings.ConversionProcessSettingsBuilder

License requirements: convert_to_pmi (" Convert To PMI"), drafting ("DRAFTING")
.

setJTPartNameAttribute(String) - Method in interface nxopen.drawings.ConversionProcessSettingsBuilder

License requirements: convert_to_pmi (" Convert To PMI"), drafting ("DRAFTING")
.

setJtUpdateFromSource(SessionPdm.JtUpdateFromSourceType) - Method in interface nxopen.preferences.SessionPdm

License requirements: None.

setJtWrite(JtCreator.FileWrite) - Method in interface nxopen.JtCreator

License requirements: None.

setJumpLabel(String) - Method in interface nxopen.cam.InspectionCmmCommandBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setJumpVelocity(double) - Method in interface nxopen.sim.KinematicAxisBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setJunction(boolean) - Method in interface nxopen.cae.BoltBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setJunction(KinematicJunction) - Method in interface nxopen.sim.KinematicAxisBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setJunction1SelectionType(BoltBuilder.Selection) - Method in interface nxopen.cae.BoltBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setJunction1SpiderScale(double) - Method in interface nxopen.cae.BoltBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setJunction1SpiderType(BoltBuilder.SpiderDiameter) - Method in interface nxopen.cae.BoltBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setJunction2SelectionType(BoltBuilder.Selection) - Method in interface nxopen.cae.BoltBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setJunction2SpiderScale(double) - Method in interface nxopen.cae.BoltBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setJunction2SpiderType(BoltBuilder.SpiderDiameter) - Method in interface nxopen.cae.BoltBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setJunctionSelectionType(BoltBuilder.Selection) - Method in interface nxopen.cae.BoltBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setJunctionSpiderScale(double) - Method in interface nxopen.cae.BoltBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setJunctionSpiderType(BoltBuilder.SpiderDiameter) - Method in interface nxopen.cae.BoltBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setJunctionTolerance(double) - Method in interface nxopen.cae.BoltBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setJustification(PlotBuilder.JustificationOption) - Method in interface nxopen.PlotBuilder

License requirements: None.

setK(double) - Method in interface nxopen.cam.InspectionMeasurePointBuilder

License requirements: None.

setKDirectionBuilder(double) - Method in interface nxopen.cam.MachineHeadGroupBuilder

License requirements: cam_base ("CAM BASE")
.

setKeepAllContinuity(boolean) - Method in interface nxopen.features.StudioXformBuilder

Deprecated.

Deprecated in NX8.5.0. Use StudioXformBuilderEx instead.

setKeepAllContinuity(boolean) - Method in interface nxopen.features.StudioXformBuilderEx

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setKeepAssociation(boolean) - Method in interface nxopen.features.shipdesign.PenetrationAssociationBuilder

License requirements: nx_penetration_mgmt ("Penetration Management")
.

setKeepBaseLength(boolean) - Method in interface nxopen.features.GlobalShapingBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setKeepCircuit(boolean) - Method in interface nxopen.tooling.SpecifyCircuitBuilder

License requirements: ug_mold_design ("UG MOLD")
.

setKeepCoordSystem(boolean) - Method in interface nxopen.features.shipdesign.CustomBracketBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setKeepCoordSystem(boolean) - Method in interface nxopen.features.shipdesign.ShipCutoutBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setKeepCoordSystem(boolean) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setKeepCoordSystem(boolean) - Method in interface nxopen.features.shipdesign.WeldCutBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setKeepDiscardMethod(TrimSheetBuilder.KeepDiscardOption) - Method in interface nxopen.features.TrimSheetBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setKeepDrawingOpen(boolean) - Method in interface nxopen.tooling.CompDrawingBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setKeepEditedPartsOpen(boolean) - Method in interface nxopen.layout2d.ComponentSettingsBuilder

License requirements: nx_layout ("NX Layout")
.

setKeepEndPlane(boolean) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setKeepFace(boolean) - Method in interface nxopen.features.shipdesign.ProfileBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setKeepFeatureToReplace(boolean) - Method in interface nxopen.features.ReplaceFeatureBuilder

Deprecated.

Deprecated in NX7.5.2. Use Features.ReplaceFeatureBuilder#setDeleteOriginalFeature instead.

setKeepFreeMeshes(boolean) - Method in interface nxopen.cae.MappedMeshBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setKeepGuide(boolean) - Method in interface nxopen.features.shipdesign.ProfileBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setKeepHeelPoint(boolean) - Method in interface nxopen.features.shipdesign.CustomBracketBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setKeepImprintedEdges(boolean) - Method in interface nxopen.features.SplitBodyBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setKeepInvalidElems(boolean) - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setKeepOppositeSurface(boolean) - Method in interface nxopen.features.SnipSurfaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setKeepOriginal(boolean) - Method in interface nxopen.features.UnsewBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setKeepOriginalDesignElement(boolean) - Method in interface nxopen.assemblies.DesignElementBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setKeepOrthogonal(boolean) - Method in interface nxopen.features.LocalScaleCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setKeepOrthogonal(boolean) - Method in interface nxopen.features.MoveCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setKeepOrthogonal(boolean) - Method in interface nxopen.features.OffsetMoveCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setKeepOrthogonal(boolean) - Method in interface nxopen.features.ResizeCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setKeepParameterization(boolean) - Method in interface nxopen.features.VariableOffsetBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setKeepPlacementPlane(boolean) - Method in interface nxopen.features.shipdesign.CustomBracketBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setKeepRadFixed(boolean) - Method in interface nxopen.tooling.DirectUnbendBuilder

License requirements: None.

setKeepRadiusFixed(boolean) - Method in interface nxopen.features.sheetmetal.ResizeBendAngleBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setKeepRadiusFixed(boolean) - Method in interface nxopen.tooling.BendOperationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setKeepReferencePlane(boolean) - Method in interface nxopen.features.shipdesign.CustomBracketBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setKeepRemoveTargetMethod(BooleanRegionSelect.KeepRemoveOption) - Method in interface nxopen.geometricutilities.BooleanRegionSelect

License requirements: solid_modeling ("SOLIDS MODELING")
.

setKeepRemoveToolMethod(BooleanRegionSelect.KeepRemoveOption) - Method in interface nxopen.geometricutilities.BooleanRegionSelect

License requirements: solid_modeling ("SOLIDS MODELING")
.

setKeepReverseDirection(boolean) - Method in interface nxopen.features.shipdesign.CustomBracketBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setKeepReverseDirection1(boolean) - Method in interface nxopen.features.shipdesign.ShipCutoutBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setKeepReverseDirection2(boolean) - Method in interface nxopen.features.shipdesign.ShipCutoutBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setKeepReverseEndOffset(boolean) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setKeepReverseGuideOffset(boolean) - Method in interface nxopen.features.shipdesign.SteelVentHolesBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setKeepReverseLine1Offset(boolean) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setKeepReverseLine2Offset(boolean) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setKeepReverseStartOffset(boolean) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setKeepSectionGuide(boolean) - Method in interface nxopen.features.shipdesign.SteelVentHolesBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setKeepSelectCSYSFace(boolean) - Method in interface nxopen.features.shipdesign.ShipCutoutBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setKeepSelectCSYSFace(boolean) - Method in interface nxopen.features.shipdesign.WeldCutBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setKeepSelected(boolean) - Method in interface nxopen.features.MatchEdgeBuilder

License requirements: features_modeling ("FEATURES MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setKeepSelectEndTrim(boolean) - Method in interface nxopen.features.shipdesign.SteelVentHolesBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setKeepSelectFace(boolean) - Method in interface nxopen.features.shipdesign.SteelCollarPlateBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setKeepSelectGuideCurve(boolean) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setKeepSelectGuideCurve(boolean) - Method in interface nxopen.features.shipdesign.WeldCutBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setKeepSelectLine1(boolean) - Method in interface nxopen.features.shipdesign.ShipCutoutBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setKeepSelectLine1(boolean) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setKeepSelectLine2(boolean) - Method in interface nxopen.features.shipdesign.ShipCutoutBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setKeepSelectLine2(boolean) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setKeepSelectOrientationLine(boolean) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setKeepSelectProfileBody(boolean) - Method in interface nxopen.features.shipdesign.SteelCollarPlateBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setKeepSelectStartTrim(boolean) - Method in interface nxopen.features.shipdesign.SteelVentHolesBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setKeepSelectTargetFace(boolean) - Method in interface nxopen.features.shipdesign.ShipCutoutBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setKeepSelectTargetFace(boolean) - Method in interface nxopen.features.shipdesign.SteelVentHolesBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setKeepSelectTargetFace(boolean) - Method in interface nxopen.features.shipdesign.WeldCutBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setKeepSelectTrimFace(boolean) - Method in interface nxopen.features.shipdesign.CustomBracketBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setKeepSheet(boolean) - Method in interface nxopen.geometricutilities.MatchSurfaceBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING")
.

setKeepSheet(boolean) - Method in interface nxopen.tooling.AssignPatchBuilder

License requirements: None.

setKeepSize(boolean) - Method in interface nxopen.tooling.ElectrodeBlankBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setKeepSize(boolean) - Method in interface nxopen.tooling.ElectrodeDeleteBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setKeepStartPlane(boolean) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setKeepTangent(int) - Method in interface nxopen.features.LocalScaleCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setKeepTangent(int) - Method in interface nxopen.features.MoveCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setKeepTangent(int) - Method in interface nxopen.features.OffsetMoveCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setKeepTargets(boolean) - Method in interface nxopen.features.EmbossBodyBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setKeepTools(boolean) - Method in interface nxopen.features.EmbossBodyBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setKeepWallThickness(boolean) - Method in interface nxopen.features.StepBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setKeepZValueInSameMSet(boolean) - Method in interface nxopen.tooling.ElectrodeBlankBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setKeyField(boolean) - Method in interface nxopen.annotations.TableColumnBuilder

License requirements: drafting ("DRAFTING")
.

setKeywords(String) - Method in interface nxopen.visualreporting.VisualReport

Sets a comma separated string of the keywords for this VisualReport .

setKeywordsOfVisualReport(String) - Method in interface nxopen.visualreporting.VisualReportBuilder

License requirements: None.

setKeywordText(Tag, String, String) - Method in interface nxopen.uf.UFGdt

Refer to UF_GDT_set_keyword_text for documentation.

setKFactor(String) - Method in interface nxopen.tooling.DirectUnfoldBuilder

Deprecated.

Deprecated in NX10.0.0. Use Tooling.DefineNeutralFactorBuilder#setNeutralFactor instead.

setKinematicModel(SimDebugBuilder.KinematicModelType) - Method in interface nxopen.sim.SimDebugBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setKitName(String) - Method in interface nxopen.sim.ExportMachineKitBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setKLine(double) - Method in interface nxopen.cam.InspectionLineFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setKNormal(double) - Method in interface nxopen.cam.InspectionLineFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setKnotDisplayState(boolean) - Method in interface nxopen.DisplayModification

Sets the flag for knot display.

setKnotPointMethod(DivideCurveBuilder.KnotPointOption) - Method in interface nxopen.features.DivideCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setKnotPointNumber(int) - Method in interface nxopen.features.DivideCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setKnots(double[]) - Method in interface nxopen.features.StudioSplineBuilder

Deprecated.

Deprecated in NX8.0.0. Use StudioSplineBuilderEx instead.

setKnots(double[]) - Method in interface nxopen.features.StudioSplineBuilderEx

Sets the optional knot sequence for by pole spline
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setKnowledgeFusionClassName(String) - Method in interface nxopen.annotations.PmiAttributeBuilder

License requirements: None.

setKnuckledProfile(boolean) - Method in interface nxopen.features.shipdesign.ProfileListBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setKnuckleEdges(Edge[]) - Method in interface nxopen.features.shipdesign.PlateBuilder

Sets the knuckle edges, which include edges for both bend and split types.

setKnuckleEdges(TaggedObject[]) - Method in interface nxopen.features.shipdesign.PlateSystemBuilder

Sets the knuckle edges, which includes edges for both bend and split types.

setKnuckleOption(StiffenerBuilder.KnuckleOptions) - Method in interface nxopen.features.shipdesign.StiffenerBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setKnuckleRatio(double) - Method in interface nxopen.features.shipdesign.PlateStockBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setKnuckleSmoothAngle(double) - Method in interface nxopen.features.shipdesign.PlateStockBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setKrxFile(String) - Method in interface nxopen.linedesigner.ReuseLibraryDragData

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setKt1(double) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setKt2(double) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setKt3(double) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setKv(double) - Method in interface nxopen.sim.KinematicAxisBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setL1Limit(SeatBeltAnchorageBuilder.LOneLimitType) - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setL2Limit(SeatBeltAnchorageBuilder.LTwoLimitType) - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setLabel(String) - Method in interface nxopen.annotations.DatumData

Sets the label
License requirements: None.

setLabel(String) - Method in interface nxopen.annotations.DatumTargetBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setLabel(String) - Method in interface nxopen.annotations.IDatum

Sets the label.

setLabel(String) - Method in interface nxopen.annotations.SymbolCatalogParameterBuilder

License requirements: nx_layout ("NX Layout")
.

setLabel(String) - Method in interface nxopen.annotations.TitleBlockCellBuilder

License requirements: drafting ("DRAFTING")
.

setLabel(String) - Method in interface nxopen.blockstyler.UIBlock

License requirements: None.

setLabel(int) - Method in interface nxopen.cae.AutoBCBuilder

Sets the initial label of CaeRegion and SimBC objects
License requirements: None.

setLabel(int) - Method in interface nxopen.cae.CAEConnectionBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setLabel(int) - Method in interface nxopen.cae.CaeDOFSet

Sets the label of the CaeDOFSet
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setLabel(int) - Method in interface nxopen.cae.CaeGroup

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setLabel(int) - Method in interface nxopen.cae.ElementCreateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setLabel(int) - Method in interface nxopen.cae.ElementExtrudeBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setLabel(int) - Method in interface nxopen.cae.ElementModifyLabelBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setLabel(int) - Method in interface nxopen.cae.ElementProjectBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setLabel(int) - Method in interface nxopen.cae.ElementReflectBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setLabel(int) - Method in interface nxopen.cae.ElementRevolveBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setLabel(int) - Method in interface nxopen.cae.ElementTranslateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setLabel(int) - Method in interface nxopen.cae.LaminateGlobalLayup

License requirements: nx_lam_composites ("Laminate Composites")
.

setLabel(int) - Method in interface nxopen.cae.NamedPropertyTable

Sets the label of the named property table holder
License requirements: nx_masterfem ("Finite Element Modeling")
.

setLabel(int) - Method in interface nxopen.cae.NodeCreateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setLabel(int) - Method in interface nxopen.cae.NodeModifyLabelBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setLabel(int) - Method in interface nxopen.cae.NodeProjectBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setLabel(int) - Method in interface nxopen.cae.NodeReflectBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setLabel(int) - Method in interface nxopen.cae.NodeRotateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setLabel(int) - Method in interface nxopen.cae.NodesBetweenNodesBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setLabel(int) - Method in interface nxopen.cae.NodesOnCurveBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setLabel(int) - Method in interface nxopen.cae.NodeTranslateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setLabel(int) - Method in interface nxopen.cae.SimConstraintSetBuilder

License requirements: None.

setLabel(int) - Method in interface nxopen.cae.SpiderElementBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setLabel(int) - Method in interface nxopen.CoordinateSystem

License requirements: None.

setLabel(String) - Method in interface nxopen.ListCreator

License requirements: None.

setLabel(String) - Method in interface nxopen.uistyler.CollapsibleGroup

Sets label of collapsible group
License requirements: None.

setLabel(String) - Method in interface nxopen.uistyler.GroupBox

License requirements: None.

setLabel(String) - Method in interface nxopen.uistyler.IntegerItem

Specifies descriptive text to display for the dialog item.

setLabel(String) - Method in interface nxopen.uistyler.LabelItem

Specifies descriptive text to display for the dialog item.

setLabel(String) - Method in interface nxopen.uistyler.MultiTextBox

Specifies descriptive text to display for the dialog item.

setLabel(String) - Method in interface nxopen.uistyler.OptionMenu

Sets label
License requirements: None.

setLabel(String) - Method in interface nxopen.uistyler.OptionToggle

Sets label
License requirements: None.

setLabel(String) - Method in interface nxopen.uistyler.PropertyPage

Specifies descriptive text to display for the dialog item.

setLabel(String) - Method in interface nxopen.uistyler.PushButton

Specifies descriptive text to display for the dialog item.

setLabel(String) - Method in interface nxopen.uistyler.RadioBox

Sets label
License requirements: None.

setLabel(String) - Method in interface nxopen.uistyler.RealItem

Set the label
License requirements: None.

setLabel(String) - Method in interface nxopen.uistyler.SelectionBox

Specifies the descriptive text string to display below the scrolled list and above the text field.

setLabel(String) - Method in interface nxopen.uistyler.StringItem

Specifies descriptive text to display for the dialog item.

setLabel(String) - Method in interface nxopen.uistyler.Toggle

Sets the label to display on the right side of the toggle button.

setLabel(String) - Method in interface nxopen.uistyler.ToolPalette

Specifies descriptive text to display for the dialog item.

setLabel(String) - Method in interface nxopen.uistyler.WideString

Specifies descriptive text to display for the dialog item.

setLabelCharacterHeightFactor(double) - Method in interface nxopen.drawings.ViewDetailLabelBuilder

License requirements: drafting ("DRAFTING")
.

setLabelCharacterHeightFactor(double) - Method in interface nxopen.drawings.ViewLabelBuilder

License requirements: drafting ("DRAFTING")
.

setLabelCharacterHeightFactor(double) - Method in interface nxopen.drawings.ViewSectionLabelBuilder

License requirements: drafting ("DRAFTING")
.

setLabelColor(int) - Method in interface nxopen.annotations.FrameBarElementStyleBuilder

License requirements: nx_ship_drafting ("Ship Drafting") OR drafting ("DRAFTING")
.

setLabelColor(NXColor) - Method in interface nxopen.display.PlanarShipGridBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setLabelColor(int) - Method in interface nxopen.drawings.SheetZoneSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setLabelColor(NXColor) - Method in interface nxopen.fields.DisplayPropertiesBuilder

License requirements: None.

setLabelDisplayed(boolean) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setLabelDisplayOption(GapFlushnessBuilder.DisplayOptions) - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setLabelDisplayType(PlanarShipGridBuilder.LabelDisplayOption) - Method in interface nxopen.display.PlanarShipGridBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setLabelFont(int) - Method in interface nxopen.annotations.FrameBarElementStyleBuilder

License requirements: nx_ship_drafting ("Ship Drafting") OR drafting ("DRAFTING")
.

setLabelFont(int) - Method in interface nxopen.drawings.BordersAndZonesBuilder

Deprecated.

Deprecated in NX10.0.0. Use SheetZoneSettingsBuilder.labelFont() instead.

setLabelFont(int) - Method in interface nxopen.drawings.SheetZoneSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setLabelHeight(double) - Method in interface nxopen.drawings.BordersAndZonesBuilder

Deprecated.

Deprecated in NX10.0.0. Use SheetZoneSettingsBuilder.labelHeight() instead.

setLabelHeight(double) - Method in interface nxopen.drawings.SheetZoneSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setLabelIncrement(int) - Method in interface nxopen.cae.MultipleElementCreateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setLabelIncrement(int) - Method in interface nxopen.cae.MultipleNodeCreateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setLabelItalicized(boolean) - Method in interface nxopen.annotations.FrameBarElementStyleBuilder

License requirements: nx_ship_drafting ("Ship Drafting") OR drafting ("DRAFTING")
.

setLabelItalicized(boolean) - Method in interface nxopen.drawings.SheetZoneSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setLabelLocation(SectionLineStyleBuilder.LabelLocationStyle) - Method in interface nxopen.drawings.SectionLineStyleBuilder

Deprecated.

Deprecated in NX10.0.0. Use ViewSectionLineBuilder.setLabelLocation(nxopen.drawings.ViewSectionLineBuilder.LocationType) instead.

setLabelLocation(ViewSectionLineBuilder.LocationType) - Method in interface nxopen.drawings.ViewSectionLineBuilder

License requirements: drafting ("DRAFTING")
.

setLabelName(int) - Method in interface nxopen.annotations.FrameBarElementStyleBuilder

License requirements: nx_ship_drafting ("Ship Drafting") OR drafting ("DRAFTING")
.

setLabelOffsets(int, int, int) - Method in interface nxopen.cae.FEModelOccurrence

Sets node, element, and csys offset of the femodel occurrence
License requirements: nx_masterfem ("Finite Element Modeling")
.

setLabelOnParent(DetailViewBuilder.LabelOnParentType) - Method in interface nxopen.drawings.DetailViewBuilder

License requirements: drafting ("DRAFTING")
.

setLabelOption(ElementModifyLabelBuilder.LabelType) - Method in interface nxopen.cae.ElementModifyLabelBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setLabelOption(ElementProjectBuilder.LabelType) - Method in interface nxopen.cae.ElementProjectBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setLabelOption(ElementReflectBuilder.LabelType) - Method in interface nxopen.cae.ElementReflectBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setLabelOption(ElementTranslateBuilder.LabelType) - Method in interface nxopen.cae.ElementTranslateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setLabelOption(NodeModifyLabelBuilder.LabelType) - Method in interface nxopen.cae.NodeModifyLabelBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setLabelOption(NodeProjectBuilder.LabelType) - Method in interface nxopen.cae.NodeProjectBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setLabelOption(NodeReflectBuilder.LabelType) - Method in interface nxopen.cae.NodeReflectBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setLabelOption(NodeRotateBuilder.LabelType) - Method in interface nxopen.cae.NodeRotateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setLabelOption(NodeTranslateBuilder.LabelType) - Method in interface nxopen.cae.NodeTranslateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setLabelParentDisplay(ViewDetailLabelBuilder.LabelParentDisplayTypes) - Method in interface nxopen.drawings.ViewDetailLabelBuilder

License requirements: drafting ("DRAFTING")
.

setLabelPosition(LabelPositionTypes) - Method in interface nxopen.drawings.ViewDetailLabelBuilder

License requirements: drafting ("DRAFTING")
.

setLabelPosition(LabelPositionTypes) - Method in interface nxopen.drawings.ViewLabelBuilder

License requirements: drafting ("DRAFTING")
.

setLabelPosition(LabelPositionTypes) - Method in interface nxopen.drawings.ViewSectionLabelBuilder

License requirements: drafting ("DRAFTING")
.

setLabelPrefix(String) - Method in interface nxopen.drawings.ViewDetailLabelBuilder

License requirements: drafting ("DRAFTING")
.

setLabelPrefix(String) - Method in interface nxopen.drawings.ViewLabelBuilder

License requirements: drafting ("DRAFTING")
.

setLabelPrefix(String) - Method in interface nxopen.drawings.ViewSectionLabelBuilder

License requirements: drafting ("DRAFTING")
.

setLabelReference(BoundedGridBuilder.LabelReferenceType) - Method in interface nxopen.display.BoundedGridBuilder

License requirements: None.

setLabels(String, String) - Method in interface nxopen.uistyler.IntegerScale

Specifies the text for the minimum and maximum label.

setLabels(String, String) - Method in interface nxopen.uistyler.RealScale

Sets labels
License requirements: None.

setLabelSettingInheritted(boolean) - Method in interface nxopen.display.PlanarShipGridBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setLabelsToSkip(String) - Method in interface nxopen.drawings.SheetZoneSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setLabelString(String) - Method in interface nxopen.blockstyler.BodyCollector

License requirements: None.

setLabelString(String) - Method in interface nxopen.blockstyler.CurveCollector

License requirements: None.

setLabelString(String) - Method in interface nxopen.blockstyler.FaceCollector

License requirements: None.

setLabelString(String) - Method in interface nxopen.blockstyler.LineColorFontWidth

License requirements: None.

setLabelString(String) - Method in interface nxopen.blockstyler.SectionBuilder

License requirements: None.

setLabelString(String) - Method in interface nxopen.blockstyler.SelectElement

License requirements: None.

setLabelString(String) - Method in interface nxopen.blockstyler.SelectFeature

License requirements: None.

setLabelString(String) - Method in interface nxopen.blockstyler.SelectNode

License requirements: None.

setLabelString(String) - Method in interface nxopen.blockstyler.SelectObject

License requirements: None.

setLabelString(String) - Method in interface nxopen.blockstyler.SpecifyCSYS

License requirements: None.

setLabelString(String) - Method in interface nxopen.blockstyler.SpecifyLocation

License requirements: None.

setLabelString(String) - Method in interface nxopen.blockstyler.SpecifyPlane

License requirements: None.

setLabelString(String) - Method in interface nxopen.blockstyler.SpecifyPoint

License requirements: None.

setLabelString(String) - Method in interface nxopen.blockstyler.SpecifyVector

License requirements: None.

setLabelString(String) - Method in interface nxopen.blockstyler.SuperPoint

License requirements: None.

setLabelString(String) - Method in interface nxopen.blockstyler.SuperSection

License requirements: None.

setLabelVisibility(boolean) - Method in interface nxopen.blockstyler.Enumeration

License requirements: None.

setLabelVisibility(boolean) - Method in interface nxopen.blockstyler.LineWidth

License requirements: None.

setLabelWidth(int) - Method in interface nxopen.annotations.FrameBarElementStyleBuilder

License requirements: nx_ship_drafting ("Ship Drafting") OR drafting ("DRAFTING")
.

setLabelWidth(int) - Method in interface nxopen.drawings.SheetZoneSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setLaminarSlits(CleanupFacetBodyBuilder.CleanupOptions) - Method in interface nxopen.facet.CleanupFacetBodyBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setLamPptSelect(int) - Method in interface nxopen.cae.GlobalLayupImportFromPptBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setLanguage(ProgramInformation.LanguageType) - Method in interface nxopen.report.ProgramInformation

License requirements: None.

setLargeAssemblyStepThreshold(int) - Method in interface nxopen.drawings.ViewWorkflowBuilder

License requirements: drafting ("DRAFTING")
.

setLastCut(NXColor) - Method in interface nxopen.cam.PathDisplayColors

License requirements: cam_base ("CAM BASE")
.

setLastCutMode(Cycle.CutMode) - Method in interface nxopen.cam.Cycle

License requirements: cam_base ("CAM BASE")
.

setLastCuttingEdge(double) - Method in interface nxopen.cam.TurnCutterClearance

License requirements: cam_base ("CAM BASE")
.

setLastCutValue(double) - Method in interface nxopen.cam.Cycle

License requirements: cam_base ("CAM BASE")
.

setLastIteration(BaseIteration) - Method in interface nxopen.cae.TransientResultsReductionBuilder

The last iteration
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setLastLimitPoint(Point3d) - Method in interface nxopen.die.OutputCurvesBuilder

Sets the last limit point.

setLastSelectedLoopIndex(int) - Method in interface nxopen.features.GuidedExtensionBuilderEx

License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setLastSelectedLoopIndex(int) - Method in interface nxopen.tooling.GuidedExtensionBuilder

Sets the loop index for the last selected loop which contains the last selected edge.

setLastSelectedNode(NavigatorNode) - Method in interface nxopen.shipdesign.NavigatorView

Sets last selected node.

setLateralEffects(boolean) - Method in interface nxopen.motion.TirePropertyHighOrderParameters

License requirements: mechanisms ("MECHANISMS")
.

setLateralForceType(TirePropertyBasicParameters.CorneringType) - Method in interface nxopen.motion.TirePropertyBasicParameters

License requirements: mechanisms ("MECHANISMS")
.

setLatheWorkPlaneType(TurnOrientGeomBuilder.LatheWorkPlaneTypes) - Method in interface nxopen.cam.TurnOrientGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setLatitudeScale(double) - Method in interface nxopen.display.IrayPlusSimpleMaterialEditorBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setLawControlConstantDepth(String) - Method in interface nxopen.geometricutilities.ConicCrossSection

Sets a constant radius for the depth law control of the conic section with face blend.

setLawControlConstantFirstOffset(String) - Method in interface nxopen.geometricutilities.ConicCrossSection

Sets a constant radius for the first law control of the conic section with face blend.

setLawControlConstantRadius(String) - Method in interface nxopen.geometricutilities.CircularCrossSection

Sets a constant radius for the law control of the circular section with face blend.

setLawControlConstantRho(String) - Method in interface nxopen.geometricutilities.ConicCrossSection

Sets a constant radius for the rho law control of the conic section with face blend.

setLawControlConstantSecondOffset(String) - Method in interface nxopen.geometricutilities.ConicCrossSection

Sets a constant radius for the second law control of the conic section with face blend.

setLawControlConstantShapeSkew(String) - Method in interface nxopen.geometricutilities.ConicCrossSection

Sets a constant radius for the shape skew law control of the conic section with face blend.

setLawControlDepthEndRadius(String) - Method in interface nxopen.geometricutilities.ConicCrossSection

Sets a end radius for the depth law control of the conic section with face blend.

setLawControlDepthStartRadius(String) - Method in interface nxopen.geometricutilities.ConicCrossSection

Sets a start radius for the depth law control of the conic section with face blend.

setLawControlEndRadius(String) - Method in interface nxopen.geometricutilities.CircularCrossSection

Sets a end radius for the law control of the circular section with face blend.

setLawControlFirstOffsetEndRadius(String) - Method in interface nxopen.geometricutilities.ConicCrossSection

Sets a end radius for the first law control of the conic section with face blend.

setLawControlFirstOffsetStartRadius(String) - Method in interface nxopen.geometricutilities.ConicCrossSection

Sets a start radius for the first law control of the conic section with face blend.

setLawControlRhoEndRadius(String) - Method in interface nxopen.geometricutilities.ConicCrossSection

Sets a end radius for the rho law control of the conic section with face blend.

setLawControlRhoStartRadius(String) - Method in interface nxopen.geometricutilities.ConicCrossSection

Sets a start radius for the rho law control of the conic section with face blend.

setLawControlSecondOffsetEndRadius(String) - Method in interface nxopen.geometricutilities.ConicCrossSection

Sets a end radius for the second law control of the conic section with face blend.

setLawControlSecondOffsetStartRadius(String) - Method in interface nxopen.geometricutilities.ConicCrossSection

Sets a start radius for the second law control of the conic section with face blend.

setLawControlShapeSkewEndRadius(String) - Method in interface nxopen.geometricutilities.ConicCrossSection

Sets a end radius for the shape skew law control of the conic section with face blend.

setLawControlShapeSkewStartRadius(String) - Method in interface nxopen.geometricutilities.ConicCrossSection

Sets a start radius for the shape skew law control of the conic section with face blend.

setLawControlStartRadius(String) - Method in interface nxopen.geometricutilities.CircularCrossSection

Sets a start radius for the law control of the circular section with face blend.

setLawCurveOption(LawBuilder.RetainLawCurveOption) - Method in interface nxopen.geometricutilities.LawBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setLawString(Section) - Method in interface nxopen.features.AOCSBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.

setLawStringFlip(boolean) - Method in interface nxopen.features.AOCSBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.

setLawType(LawBuilder.Type) - Method in interface nxopen.geometricutilities.LawBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setLawValueAtPoint(String) - Method in interface nxopen.geometricutilities.SpinePointData

Sets the law value at the specified point
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setLaydownCurve(boolean) - Method in interface nxopen.features.LawExtensionBuilderEx

License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING")
.

setLayer(int) - Method in interface nxopen.assemblies.AssembliesGeneralPropertiesBuilder

License requirements: None.

setLayer(int) - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setLayer(int) - Method in interface nxopen.assemblies.DesignElementBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setLayer(int) - Method in interface nxopen.cae.PostJtExportBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setLayer(int) - Method in interface nxopen.cae.ResultVariable

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setLayer(int) - Method in interface nxopen.cam.InspectionMeasDataBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setLayer(int) - Method in interface nxopen.cam.InspectionSaveToLayerBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setLayer(int) - Method in interface nxopen.cam.NcmctPartMountingBuilder

License requirements: cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setLayer(int) - Method in interface nxopen.display.LayerSettingsBuilder

License requirements: None.

setLayer(int) - Method in interface nxopen.DisplayableObject

License requirements: None.

setLayer(int) - Method in interface nxopen.features.MoveObjectBuilder

License requirements: None.

setLayer(int) - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setLayer(int) - Method in interface nxopen.fields.DisplayPropertiesBuilder

License requirements: None.

setLayer(int) - Method in interface nxopen.mechanicalrouting.PartPlacementBuilder

Sets the layer for the Design Elements created during part placement operation.

setLayer(int) - Method in interface nxopen.preferences.RoutingPart

Sets the layer to apply to new components.

setLayer(int) - Method in interface nxopen.tooling.MWCopySheetsBuilder

License requirements: None.

setLayer(int) - Method in interface nxopen.tooling.SpecifyBaffleBuilder

License requirements: ug_mold_design ("UG MOLD")
.

setLayer(int) - Method in interface nxopen.tooling.SpecifyCircuitBuilder

License requirements: ug_mold_design ("UG MOLD")
.

setLayer(Tag, int) - Method in interface nxopen.uf.UFObj

Refer to UF_OBJ_set_layer for documentation.

setLayerAllowHidden(Tag, int) - Method in interface nxopen.uf.UFObj

Refer to UF_OBJ_set_layer_allow_hidden for documentation.

setLayerDefault(int) - Method in interface nxopen.IgesImporter

License requirements: None.

setLayerDefault(int) - Method in interface nxopen.Step203Importer

License requirements: None.

setLayerDefault(int) - Method in interface nxopen.Step214Importer

License requirements: None.

setLayerMask(String) - Method in interface nxopen.DxfdwgCreator

License requirements: None.

setLayerMask(String) - Method in interface nxopen.IgesCreator

License requirements: None.

setLayerMask(String) - Method in interface nxopen.IgesImporter

License requirements: None.

setLayerMask(String) - Method in interface nxopen.Step203Creator

Deprecated.

Deprecated in NX11.0.0. Use StepCreator instead.

setLayerMask(String) - Method in interface nxopen.Step214Creator

Deprecated.

Deprecated in NX11.0.0. Use StepCreator instead.

setLayerMask(String) - Method in interface nxopen.StepCreator

License requirements: None.

setLayerNumber(int) - Method in interface nxopen.assemblies.CreateNewComponentBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setLayerNumber(int) - Method in interface nxopen.PasteSpecialBuilder

License requirements: None.

setLayerNumber(int) - Method in interface nxopen.userdefinedtemplate.InstantiationBuilder

License requirements: usr_defined_features ("USER DEFINED FEATURES")
.

setLayerOpt(PasteSpecialBuilder.LayerOption) - Method in interface nxopen.PasteSpecialBuilder

License requirements: None.

setLayerOption(AssembliesGeneralPropertiesBuilder.LayerOptions) - Method in interface nxopen.assemblies.AssembliesGeneralPropertiesBuilder

License requirements: None.

setLayerOption(int) - Method in interface nxopen.assemblies.Component

Sets the layer option.

setLayerOption(CreateNewComponentBuilder.ComponentLayerOptionType) - Method in interface nxopen.assemblies.CreateNewComponentBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setLayerOption(DesignElementBuilder.LayerOptionType) - Method in interface nxopen.assemblies.DesignElementBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setLayerOption(int) - Method in interface nxopen.blockstyler.LayerBlock

License requirements: None.

setLayerOption(LayerSettingsBuilder.LayerOptionType) - Method in interface nxopen.display.LayerSettingsBuilder

License requirements: None.

setLayerOption(MoveObjectBuilder.LayerOptionType) - Method in interface nxopen.features.MoveObjectBuilder

License requirements: None.

setLayerOption(PartImporter.LayerOptionType) - Method in interface nxopen.PartImporter

Sets the layer option.

setLayerOption(AddReusableFeatureBuilder.LayerOptionType) - Method in interface nxopen.tooling.AddReusableFeatureBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setLayerOption(InstantiationBuilder.JaUserdefinedtemplateLayerOption) - Method in interface nxopen.userdefinedtemplate.InstantiationBuilder

License requirements: usr_defined_features ("USER DEFINED FEATURES")
.

setLayerOptions(NcmctPartMountingBuilder.LayerTypes) - Method in interface nxopen.cam.NcmctPartMountingBuilder

License requirements: cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setLayers(int) - Method in interface nxopen.cae.MeshFromBoundaryBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setLayerSelection(int) - Method in interface nxopen.cae.responsesimulation.DataLocation

License requirements: nx_response_anlys ("NX Response Analysis")
.

setLayersOptions(PartVisualizationEmphasis.LayersOptions) - Method in interface nxopen.preferences.PartVisualizationEmphasis

Modifies options that control the appearance of de-emphasized shaded geometry when the See-Thru style is set to Layers.

setLayerValue(int) - Method in interface nxopen.blockstyler.LayerBlock

License requirements: None.

setLayoutAsString(String) - Method in interface nxopen.blockstyler.Enumeration

License requirements: None.

setLayoutAsString(String) - Method in interface nxopen.blockstyler.LineColorFontWidth

License requirements: None.

setLayoutAsString(String) - Method in interface nxopen.blockstyler.SetList

License requirements: None.

setLayoutAsString(String) - Method in interface nxopen.blockstyler.TextColorFontWidth

License requirements: None.

setLayoutChanged(boolean) - Method in interface nxopen.cam.InspectionUVGridBuilder

Flag indicating whether layout changed.

setLayoutFlange(boolean) - Method in interface nxopen.die.PierceTaskBuilder

Sets the layout flange setting of the pierce task.

setLayoutFlange(boolean) - Method in interface nxopen.die.TrimTaskBuilder

Sets the layout flange setting of the trim task.

setLayoutFlange(boolean) - Method in interface nxopen.tooling.DieEngTrimTaskBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setLayoutName(String) - Method in interface nxopen.cam.LayoutCiBuilder

License requirements: cam_base ("CAM BASE")
.

setLayoutSaveSettings(int) - Method in interface nxopen.cam.LayoutCiBuilder

License requirements: cam_base ("CAM BASE")
.

setLayoutState(LayoutState) - Method in interface nxopen.cae.LayoutStateApplicator

Sets the layout state that will be applied.

setLayoutStates(LayoutState[]) - Method in interface nxopen.cae.ImportSimulationBuilder

Set Layout States to import
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setLayoutType(CalloutGroupBuilder.Layout) - Method in interface nxopen.annotations.CalloutGroupBuilder

License requirements: drafting ("DRAFTING")
.

setLayoutType(StandardViewsBuilder.Type) - Method in interface nxopen.drawings.StandardViewsBuilder

License requirements: nx_layout ("NX Layout")
.

setLayoutType(BlankNestingBuilder.LayoutTypeSpecification) - Method in interface nxopen.tooling.BlankNestingBuilder

License requirements: None.

setLayoutVector(Direction) - Method in interface nxopen.tooling.LayoutBuilder

License requirements: None.

setLaySymbolText(String) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder

License requirements: None.

setLaySymbolType(SearchModelViewBuilder.TextComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder

License requirements: None.

setLayupName(String) - Method in interface nxopen.cae.LaminateImportedLayupBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setLccMinWidth(double) - Method in interface nxopen.die.RibChildBuilder

Sets the lightening core mininum width of the die rib.

setLccMinWidth(double) - Method in interface nxopen.die.RibParentBuilder

Sets the lightening core mininum width of die ribs.

setLeadAngle(double) - Method in interface nxopen.cam.ToolAxisVariable

License requirements: cam_base ("CAM BASE")
.

setLeaderAlignment(LeaderAlignment) - Method in interface nxopen.annotations.LeaderBundle

Sets the leader alignment
License requirements: None.

setLeaderAttachment(HoleCalloutSettingsBuilder.LeaderAttachment) - Method in interface nxopen.annotations.HoleCalloutSettingsBuilder

Sets the leader attachment, which decides where the leader is attached to the call out.

setLeaderAttachmentPoint(MasterSymbolBuilder.LeaderAttachmentType, Point) - Method in interface nxopen.annotations.MasterSymbolBuilder

Setting Leader attachment point on builder side
License requirements: drafting ("DRAFTING")
.

setLeaderBundle(LeaderBundle) - Method in interface nxopen.annotations.AnnotationPlacement

Sets the leader bundle for the current annotation in the builder
License requirements: drafting ("DRAFTING")
.

setLeaderData(int, LeaderAttachment, NXObject, View, Point3d, double, Point3d[]) - Method in interface nxopen.annotations.LeaderBundle

Sets the leader data for the nth leader
License requirements: None.

setLeaderLineLength(double) - Method in interface nxopen.markup.MarkupObject

Sets the leader line length
License requirements: None.

setLeaderLocation(VerticalTextJustification) - Method in interface nxopen.annotations.LineAndArrowPreferences

Sets the leader location
License requirements: None.

setLeaderLocation(VerticalTextJustification) - Method in interface nxopen.annotations.LineArrowStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setLeaderOrientation(LeaderOrientation) - Method in interface nxopen.annotations.Annotation

Sets the leader orientation for the annotation.

setLeaderOrientation(LeaderOrientation) - Method in interface nxopen.annotations.DimensionData

Sets the leader orientation for the dimension
License requirements: None.

setLeaderOrientation(LeaderSide) - Method in interface nxopen.annotations.LineArrowStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setLeaderPerpendicular(boolean) - Method in interface nxopen.annotations.LeaderData

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setLeaderPlacement(ChamferLeaderPlacement) - Method in interface nxopen.annotations.ChamferDimensionPreferences

Sets the leader placement relative to the chamfer
License requirements: None.

setLeaderPositionParameter(double) - Method in interface nxopen.annotations.Gdt

Sets a parameter which indicates where the leader end point is located on the object that it is attached to. 0.0 indicates the start of the object that it is attached to and 1.0 indicates the end of the object.

setLeaderSelection(boolean) - Method in interface nxopen.drafting.CutCopyPasteLeaderBuilder

License requirements: drafting ("DRAFTING")
.

setLeaderSide(LeaderSide) - Method in interface nxopen.annotations.LeaderBundle

Sets the leader side
License requirements: None.

setLeaderStub(DiameterRadiusLeaderStub) - Method in interface nxopen.annotations.DiameterRadiusPreferences

Deprecated.

Deprecated in NX9.0.0. Use DimensionPreferences.setTextPosition(nxopen.annotations.TextPosition) instead.

setLeaderType(LeaderType) - Method in interface nxopen.annotations.LeaderBundle

Sets the leader type
License requirements: None.

setLeadingAngle(double) - Method in interface nxopen.cam.ToolAxisAdvanced

Deprecated.

Deprecated in NX8.5.0. Use CAM.LeadAngles#atLeadingEdge instead.

setLeadInMethod(NcmWedmBuilder.LeadInMethodTypes) - Method in interface nxopen.cam.NcmWedmBuilder

License requirements: cam_base ("CAM BASE")
.

setLeadInPoint(NXObject) - Method in interface nxopen.cam.WedmBasedGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setLeadInPointStatus(int) - Method in interface nxopen.cam.WedmBasedGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setLeadOutMethod(NcmWedmBuilder.LeadOutMethodTypes) - Method in interface nxopen.cam.NcmWedmBuilder

License requirements: cam_base ("CAM BASE")
.

setLeadOutPoint(NXObject) - Method in interface nxopen.cam.WedmOpenGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setLeadOutPointStatus(int) - Method in interface nxopen.cam.WedmBasedGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setLeadOutSameAsLeadIn(NcmWedmBuilder.LeadOutSameAsLeadInTypes) - Method in interface nxopen.cam.NcmWedmBuilder

License requirements: cam_base ("CAM BASE")
.

setLeastSqrAutoFilter(boolean) - Method in interface nxopen.cae.ModelUpdateOptimOptionsBuilder

License requirements: nx_correl_update ("FE Model Update")
.

setLeftDialogItem(String) - Method in interface nxopen.uistyler.Attachment

Sets the left dialog item
License requirements: None.

setLeftDistance(double) - Method in interface nxopen.tooling.BlankLayoutBuilder

License requirements: None.

setLeftEyeColor(NXColor) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setLeftEyeDownColor(NXColor) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setLeftEyeUpColor(NXColor) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setLeftMargin(double) - Method in interface nxopen.drawings.BordersAndZonesBuilder

Deprecated.

Deprecated in NX10.0.0. Use SheetMarginSettingsBuilder.leftTrimmedMargin() instead.

setLeftOffset(int) - Method in interface nxopen.uistyler.Attachment

Sets the left offset
License requirements: None.

setLeftRightSide(BlankLayoutBuilder.LeftRightSideOption) - Method in interface nxopen.tooling.BlankLayoutBuilder

License requirements: None.

setLeftTrimmedMargin(double) - Method in interface nxopen.drawings.SheetMarginSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setLeftUntrimmedMargin(double) - Method in interface nxopen.drawings.SheetMarginSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setLeftView(boolean) - Method in interface nxopen.drawings.ViewCreationWizardBuilder

License requirements: drafting ("DRAFTING")
.

setLegacyLineWidthMap(PartObject.WidthType[]) - Method in interface nxopen.preferences.PartObject

Sets line width map that is used to convert legacy line widths to new line widths.

setLegacyPreferences(int[], double, double, String, int[], int[], double, int, int, int) - Method in interface nxopen.uf.UFSket

Refer to UF_SKET_set_legacy_preferences for documentation.

setLegacyView(boolean) - Method in interface nxopen.drawings.GeneralViewStyle

License requirements: drafting ("DRAFTING")
.

setLegacyView(boolean) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder

License requirements: drafting ("DRAFTING")
.

setLegacyView(boolean) - Method in interface nxopen.preferences.GeneralViewPreferences

License requirements: drafting ("DRAFTING")
.

setLegSpreadsheet(String) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setLegZonesOutputColor(NXColor) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setLegZonesOutputFont(PedestrianProtectionBuilder.Font) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setLegZonesOutputLayer(int) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setLegZonesOutputWidth(PedestrianProtectionBuilder.Width) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setLength(Value) - Method in interface nxopen.annotations.IRectangularTarget

Sets the target length.

setLength(Value) - Method in interface nxopen.annotations.RectangularTargetData

Sets the length.

setLength(double) - Method in interface nxopen.cae.NodesOnCurveBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setLength(double) - Method in interface nxopen.cam.BoundaryTurnBlank

License requirements: cam_base ("CAM BASE")
.

setLength(double) - Method in interface nxopen.cam.HoleBossSet

License requirements: cam_base ("CAM BASE")
.

setLength(double) - Method in interface nxopen.cam.InspectionCparlnFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setLength(double) - Method in interface nxopen.cam.InspectionCylinderFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setLength(double) - Method in interface nxopen.cam.InspectionLineFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setLength(double) - Method in interface nxopen.cam.LaserCutoutDefinition

License requirements: cam_base ("CAM BASE")
.

setLength(double) - Method in interface nxopen.cam.WireGuide

License requirements: cam_base ("CAM BASE")
.

setLength(double) - Method in interface nxopen.die.KeywayChildBuilder

Sets the length of the keyway.

setLength(double) - Method in interface nxopen.die.KeywayParentBuilder

Sets the length of keyways.

setLength(double) - Method in interface nxopen.die.PadChildBuilder

Sets the length of the die pad.

setLength(double) - Method in interface nxopen.die.PadParentBuilder

Sets the length of die pads.

setLength(String) - Method in interface nxopen.die.PierceHoleChildBuilder

License requirements: ug_die_design ("Die Design")
.

setLength(String) - Method in interface nxopen.die.PierceHoleParentBuilder

License requirements: ug_die_design ("Die Design")
.

setLength(double) - Method in interface nxopen.drawings.DrawingSheetBuilder

License requirements: drafting ("DRAFTING")
.

setLength(String) - Method in interface nxopen.features.BlockFeatureBuilder

The expression representing the block length.

setLength(AeroFlangeBuilder.LengthType, String) - Method in interface nxopen.features.sheetmetal.AeroFlangeBuilder

Set the type of length and the length expression.

setLength(String) - Method in interface nxopen.features.sheetmetal.FlangeBuilder

Deprecated.

Deprecated in NX10.0.0. Use Expression.setRightHandSide(java.lang.String) on the Expression object returned from FlangeBuilder.length() instead.

setLength(double) - Method in interface nxopen.ListCreator

License requirements: None.

setLength(String) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder

License requirements: None.

setLength(double) - Method in interface nxopen.weld.WeldFillStripBuilder

License requirements: None.

setLengthAlignMethod(StiffenerBySupportPathBuilder.AlignedTo) - Method in interface nxopen.features.shipdesign.StiffenerBySupportPathBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setLengthAndHeight(double, double) - Method in interface nxopen.annotations.UserSymbolPreferences

Sets the length and height
License requirements: None.

setLengthAndWidth(double) - Method in interface nxopen.weld.EasyPatternBuilder

License requirements: ugweld ("UG WELD")
.

setLengthDirectionI(double) - Method in interface nxopen.cam.InspectionCparlnFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setLengthDirectionJ(double) - Method in interface nxopen.cam.InspectionCparlnFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setLengthDirectionK(double) - Method in interface nxopen.cam.InspectionCparlnFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setLengthDirVector(Direction) - Method in interface nxopen.cam.InspectionCparlnFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setLengthFlag(boolean) - Method in interface nxopen.motion.SpringBuilder

License requirements: mechanisms ("MECHANISMS")
.

setLengthInterval(double) - Method in interface nxopen.cam.FeedsOptimizationData

License requirements: cam_base ("CAM BASE")
.

setLengthMethod(HelixBuilder.LengthMethods) - Method in interface nxopen.features.HelixBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setLengthMethod(ShelfBuilder.LengthMethods) - Method in interface nxopen.features.ShelfBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setLengthPitch(String) - Method in interface nxopen.annotations.LineWeldDataBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setLengthPitch(String) - Method in interface nxopen.annotations.LineWeldSideData

Sets the weld length and pitch
License requirements: None.

setLengthReference(AdvancedFlangeBuilder.LengthReferences) - Method in interface nxopen.features.sheetmetal.AdvancedFlangeBuilder

License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setLengths(double[]) - Method in interface nxopen.userdefinedobjects.UserDefinedObject

Sets all of the lengths stored with this UDO
License requirements: None.

setLengths(int, int, double[]) - Method in interface nxopen.userdefinedobjects.UserDefinedObject

Replaces the lengths stored with this UDO in the specified range with a new array of lengths
License requirements: None.

setLengthType(FlangeBuilder.LengthTypeOptions) - Method in interface nxopen.features.sheetmetal.FlangeBuilder

Sets a enum indicating the length type.

setLensAngleType(CameraBuilder.LensAngle) - Method in interface nxopen.display.CameraBuilder

License requirements: None.

setLensFlareIntensity(double) - Method in interface nxopen.display.CameraBuilder

License requirements: None.

setLensFlareToggle(boolean) - Method in interface nxopen.display.CameraBuilder

License requirements: None.

setLensFlareType(CameraBuilder.LensFlare) - Method in interface nxopen.display.CameraBuilder

License requirements: None.

setLetter(String) - Method in interface nxopen.annotations.DatumFeatureSymbolBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setLetter(String) - Method in interface nxopen.annotations.DatumReferenceBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setLetter(String) - Method in interface nxopen.drawings.SectionLineStyleBuilder

Deprecated.

Deprecated in NX10.0.0. Use Drawings.ViewCommonViewLabelBuilder#setLetter instead.

setLetter(String) - Method in interface nxopen.drawings.ViewCommonViewLabelBuilder

License requirements: drafting ("DRAFTING")
.

setLetterDescription(String) - Method in interface nxopen.mechatronics.LogicObjectBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setLetterFormat(LetterFormatTypes) - Method in interface nxopen.drawings.ViewDetailLabelBuilder

License requirements: drafting ("DRAFTING")
.

setLetterFormat(LetterFormatTypes) - Method in interface nxopen.drawings.ViewLabelBuilder

License requirements: drafting ("DRAFTING")
.

setLetterFormat(LetterFormatTypes) - Method in interface nxopen.drawings.ViewSectionLabelBuilder

License requirements: drafting ("DRAFTING")
.

setLetteringPreferences(LetteringPreferences) - Method in interface nxopen.annotations.Annotation

Sets the lettering preferences for the annotation.

setLetteringPreferences(LetteringPreferences) - Method in interface nxopen.annotations.DimensionData

Sets the lettering preferences
License requirements: None.

setLetteringPreferences(LetteringPreferences) - Method in interface nxopen.annotations.SimpleDraftingAidPreferences

Sets the lettering preferences
License requirements: None.

setLetteringPreferences(LetteringPreferences) - Method in interface nxopen.preferences.AnnotationPreferences

Sets the global lettering preferences for the part
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setLetteringPreferences(UFDrf.LetteringPreferences) - Method in interface nxopen.uf.UFDrf

Refer to UF_DRF_set_lettering_preferences for documentation.

setLetterName(String) - Method in interface nxopen.mechatronics.FunctionObjectBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setLetterName(String) - Method in interface nxopen.mechatronics.LogicObjectBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setLevel(int) - Method in interface nxopen.cae.xyplot.ColorScaleStyle

License requirements: nx_ftk ("NX Advanced Graphing")
.

setLevel(LoadDraftingStandardBuilder.LoadLevel) - Method in interface nxopen.preferences.LoadDraftingStandardBuilder

License requirements: None.

setLevelDepth(double) - Method in interface nxopen.cam.PathLevelMarker

License requirements: None.

setLevelDepth(double) - Method in interface nxopen.cam.RoughTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setLevelDepthMode(RoughTurningBuilder.LevelDepthModeTypes) - Method in interface nxopen.cam.RoughTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setLevelMarker(int, PathLevelMarker) - Method in interface nxopen.cam.Path

Updates the data of the level marker event at the given index
License requirements: None.

setLevelNormal(Vector3d) - Method in interface nxopen.cam.PathLevelMarker

License requirements: None.

setLevelSequencing(GrooveMillingBuilder.LevelSequencingType) - Method in interface nxopen.cam.GrooveMillingBuilder

License requirements: cam_base ("CAM BASE")
.

setLevelSequencing(GrooveMillingBuilder.LevelSequencingType) - Method in interface nxopen.cam.RadialGrooveMillingBuilder

License requirements: cam_base ("CAM BASE")
.

setLevelType(SmoothCurveStringBuilder.LevelTypes) - Method in interface nxopen.features.SmoothCurveStringBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setLibName(String) - Method in interface nxopen.linedesigner.ReuseLibraryDragData

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setLibraryInformation(NXObject, String, String) - Method in interface nxopen.tooling.ReusableObjectPasteBuilder

Sets library information for the feature
License requirements: None.

setLibraryName(String) - Method in interface nxopen.tooling.ReusableObjectPasteBuilder

License requirements: None.

setLibraryName(String) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder

License requirements: None.

setLibraryPath(String) - Method in interface nxopen.annotations.ImportSymbolBuilder

License requirements: nx_layout ("NX Layout")
.

setLibraryPath(String) - Method in interface nxopen.cam.OperationTeaching

Sets the selected library path
License requirements: fbm_author ("FBM Author")
.

setLibraryPathName(String) - Method in interface nxopen.annotations.ImportAutocadBlockBuilder

License requirements: nx_layout ("NX Layout")
.

setLibraryReference(String) - Method in interface nxopen.cam.CAMSetup

License requirements: cam_base ("CAM BASE")
.

setLibref(String) - Method in interface nxopen.cam.CutterExport

License requirements: None.

setLiftAtConvexCorner(boolean) - Method in interface nxopen.cam.ToolAxisChange

License requirements: cam_base ("CAM BASE")
.

setLifterDriveVector(Direction) - Method in interface nxopen.tooling.DefineLifterBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setLifterName(String) - Method in interface nxopen.tooling.DefineLifterBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setLifterOnDriveVector(Direction) - Method in interface nxopen.tooling.DefineLifterBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setLifterOnLifterVector(Direction) - Method in interface nxopen.tooling.DefineLifterBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setLifterOnName(String) - Method in interface nxopen.tooling.DefineLifterBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setLifterVector(Direction) - Method in interface nxopen.tooling.DefineLifterBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setLightBuilderInList(int, LightBuilder) - Method in interface nxopen.display.Lighting

Sets a light builder in the array at the given index
License requirements: None.

setLightCollectionEnum(TrueShadingBuilder.SHEDLightCollectionType) - Method in interface nxopen.display.TrueShadingBuilder

License requirements: None.

setLightDiffuseness(double) - Method in interface nxopen.geometricanalysis.HighlightLinesAnalysisBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setLightDimmerValue(double) - Method in interface nxopen.display.TrueShadingBuilder

License requirements: None.

setLighteningCore(boolean) - Method in interface nxopen.die.RibChildBuilder

Sets the lightening core switch of the die rib, if true the lightening core will be built into the rib, if false it will not.

setLighteningCore(boolean) - Method in interface nxopen.die.RibParentBuilder

Sets the lightening core switch of die ribs, if true the lightening core will be built into the rib, if false it will not.

setLighteningCoreClearance(double) - Method in interface nxopen.die.RibChildBuilder

Sets the lightening core clearance of the die rib.

setLighteningCoreClearance(double) - Method in interface nxopen.die.RibParentBuilder

Sets the lightening core clearance of die ribs.

setLightIntensities(Light[], double[]) - Method in interface nxopen.LightCollection

Modifies the intensities of a set of lights.

setLightIntensity(double) - Method in interface nxopen.display.EnvironmentBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setLightNumber(int) - Method in interface nxopen.geometricanalysis.HighlightLinesAnalysisBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setLightPlacement(HighlightLinesAnalysisBuilder.LightPlacements) - Method in interface nxopen.geometricanalysis.HighlightLinesAnalysisBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setLightPlaneOrigin(Point3d) - Method in interface nxopen.geometricanalysis.HighlightLinesAnalysisBuilder

Sets the origin of the light plane.

setLightPlaneXAxis(Vector3d) - Method in interface nxopen.geometricanalysis.HighlightLinesAnalysisBuilder

Sets the x-axis of the light plane.

setLightPlaneYAxis(Vector3d) - Method in interface nxopen.geometricanalysis.HighlightLinesAnalysisBuilder

Sets the y-axis of the light plane.

setLightShadowType(LightBuilder.ShadowType) - Method in interface nxopen.display.LightBuilder

License requirements: None.

setLightSpacing(double) - Method in interface nxopen.geometricanalysis.HighlightLinesAnalysisBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setLightType(LightType) - Method in interface nxopen.display.LightBuilder

License requirements: None.

setLightweightView(boolean) - Method in interface nxopen.drawings.GeneralViewStyle

License requirements: drafting ("DRAFTING")
.

setLightweightView(boolean) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder

License requirements: drafting ("DRAFTING")
.

setLightweightView(boolean) - Method in interface nxopen.preferences.GeneralViewPreferences

License requirements: drafting ("DRAFTING")
.

setLightWidth(double) - Method in interface nxopen.geometricanalysis.HighlightLinesAnalysisBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setLighweightLabel(String) - Method in interface nxopen.JtCreator

License requirements: None.

setLimit(boolean) - Method in interface nxopen.sim.KinematicAxisBuilder

Deprecated.

Deprecated in NX9.0.3. Use SIM.KinematicAxisBuilder#axisMotionType instead.

setLimit1MeasureExpressionUsed(boolean) - Method in interface nxopen.features.AeroFlangeBuilder

License requirements: None.

setLimit1MeasureExpressionUsed(boolean) - Method in interface nxopen.features.AeroRibBuilder

License requirements: None.

setLimit1Type(AeroFlangeBuilder.LimitObjectTypes) - Method in interface nxopen.features.AeroFlangeBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setLimit1Type(AeroRibBuilder.LimitObjectTypes) - Method in interface nxopen.features.AeroRibBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setLimit2MeasureExpressionUsed(boolean) - Method in interface nxopen.features.AeroFlangeBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setLimit2MeasureExpressionUsed(boolean) - Method in interface nxopen.features.AeroRibBuilder

License requirements: None.

setLimit2Type(AeroFlangeBuilder.LimitObjectTypes) - Method in interface nxopen.features.AeroFlangeBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setLimit2Type(AeroRibBuilder.LimitObjectTypes) - Method in interface nxopen.features.AeroRibBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setLimitAngleNegative(double) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setLimitAnglePositive(double) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setLimitChangeValue(int) - Method in interface nxopen.geometricutilities.LocalUntrimBuilder

Sets the limit boundary handle type.

setLimitEngRetToCutRegion(boolean) - Method in interface nxopen.cam.NcmPlanarBuilder

License requirements: cam_base ("CAM BASE")
.

setLimitFailingAreas(boolean) - Method in interface nxopen.features.EdgeBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setLimitFitAnsiHoleType(FitAnsiHoleType) - Method in interface nxopen.annotations.Dimension

Sets the tolerance limit fit ANSI hole type.

setLimitFitAnsiHoleType(FitAnsiHoleType) - Method in interface nxopen.annotations.DimensionPreferences

Sets the tolerance limit fit ansi hole type
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setLimitFitAnsiHoleType(FitAnsiHoleType) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setLimitFitAnsiHoleType(FitAnsiHoleType) - Method in interface nxopen.annotations.LinearTolerance

Sets the tolerance limit fit ansi hole type
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setLimitFitAssemblyDisplayStyle(FitAssemblyDisplayStyle) - Method in interface nxopen.annotations.DimensionPreferences

Deprecated.

Deprecated in NX11.0.0. Use DimensionPreferences.setLimitFitAssemblyNewDisplayStyle(nxopen.annotations.FitAssemblyNewDisplayStyle) instead.

setLimitFitAssemblyDisplayStyle(FitAssemblyDisplayStyle) - Method in interface nxopen.annotations.DimensionStyleBuilder

Deprecated.

Deprecated in NX11.0.0. Use DimensionStyleBuilder.setLimitFitAssemblyNewDisplayStyle(nxopen.annotations.FitAssemblyNewDisplayStyle) instead.

setLimitFitAssemblyNewDisplayStyle(FitAssemblyNewDisplayStyle) - Method in interface nxopen.annotations.DimensionPreferences

Sets the new display style of fit tolerance for assembly dimensions.

setLimitFitAssemblyNewDisplayStyle(FitAssemblyNewDisplayStyle) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setLimitFitDeviation(String) - Method in interface nxopen.annotations.Dimension

Sets the tolerance limit fit deviation.

setLimitFitDeviation(String) - Method in interface nxopen.annotations.DimensionPreferences

Sets the tolerance limit fit deviation
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setLimitFitDeviation(String) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setLimitFitDeviation(String) - Method in interface nxopen.annotations.LinearTolerance

Sets the tolerance limit fit deviation
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setLimitFitDisplayAlignment(FitDisplayAlignment) - Method in interface nxopen.annotations.DimensionPreferences

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setLimitFitDisplayAlignment(FitDisplayAlignment) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setLimitFitDisplaySplitByDimline(FitDisplaySplitByDimline) - Method in interface nxopen.annotations.DimensionPreferences

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setLimitFitDisplaySplitByDimline(FitDisplaySplitByDimline) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setLimitFitDisplayStyle(FitDisplayStyle) - Method in interface nxopen.annotations.Dimension

Sets the tolerance limit fit display style.

setLimitFitDisplayStyle(FitDisplayStyle) - Method in interface nxopen.annotations.DimensionPreferences

Sets the tolerance limit fit display style
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setLimitFitDisplayStyle(FitDisplayStyle) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setLimitFitDisplayStyle(FitDisplayStyle) - Method in interface nxopen.annotations.LinearTolerance

Sets the tolerance limit fit display style
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setLimitFitEnhancedDisplayType(FitAnsiHoleType) - Method in interface nxopen.annotations.Dimension

Sets the enhanced limit fit display type.

setLimitFitGrade(int) - Method in interface nxopen.annotations.Dimension

Sets the tolerance limit fit grade.

setLimitFitGrade(int) - Method in interface nxopen.annotations.DimensionPreferences

Sets the tolerance limit fit grade
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setLimitFitGrade(int) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setLimitFitGrade(int) - Method in interface nxopen.annotations.LinearTolerance

Sets the tolerance limit fit grade
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setLimitFitShaftDeviation(String) - Method in interface nxopen.annotations.Dimension

Sets the deviation for limit fit representation of shaft tolerance NOTE: The set method should not be used to edit a read-only object such as a Mirrored PMI object.

setLimitFitShaftDeviation(String) - Method in interface nxopen.annotations.DimensionPreferences

Sets the shaft deviation for fit tolerance
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setLimitFitShaftDeviation(String) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setLimitFitShaftGrade(int) - Method in interface nxopen.annotations.Dimension

Sets the grade for limit fit representation of shaft tolerance NOTE: The set method should not be used to edit a read-only object such as a Mirrored PMI object.

setLimitFitShaftGrade(int) - Method in interface nxopen.annotations.DimensionPreferences

Sets the shaft grade for fit tolerance
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setLimitFitShaftGrade(int) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setLimitingSurface(IOrientation) - Method in interface nxopen.die.PadChildBuilder

Sets the limiting surface of the die pad.

setLimitJerk(boolean) - Method in interface nxopen.mechatronics.PositionControlBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setLimitJerk(boolean) - Method in interface nxopen.mechatronics.SpeedControlBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setLimitMethod(ExtendSheetBuilder.Limit) - Method in interface nxopen.features.ExtendSheetBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setLimitMethod(StiffenerLimitBuilder.LimitType) - Method in interface nxopen.features.shipdesign.StiffenerLimitBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setLimitOfFlc(double) - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setLimitOption(TrimPlane.LimitOptions) - Method in interface nxopen.cam.TrimPlane

License requirements: cam_base ("CAM BASE")
.

setLimitOption(CurveExtendData.LimitOptions) - Method in interface nxopen.geometricutilities.CurveExtendData

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setLimitPlane1(Plane) - Method in interface nxopen.features.ShelfBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setLimitPlane2(Plane) - Method in interface nxopen.features.ShelfBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setLimitPlanes(Plane, Plane) - Method in interface nxopen.features.FaceBlendBuilder

This function is to set limit planes for a face blend feature.

setLimitPoint1(Point) - Method in interface nxopen.die.TrimLineDevelopmentBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setLimitPoint1(Point) - Method in interface nxopen.features.ShelfBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setLimitPoint2(Point) - Method in interface nxopen.die.TrimLineDevelopmentBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setLimitPoint2(Point) - Method in interface nxopen.features.ShelfBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setLimits(EmbossLimit[]) - Method in interface nxopen.features.EmbossRegion

The emboss limits
License requirements: solid_modeling ("SOLIDS MODELING")
.

setLimits(int, int) - Method in interface nxopen.uistyler.IntegerScale

Specifies the scale's maximum and minimum value.

setLimits(double, double) - Method in interface nxopen.uistyler.RealScale

Sets limits
License requirements: None.

setLimitsAndFitsToleranceParms(Tag, UFGdt.LimitsAndFitsData) - Method in interface nxopen.uf.UFGdt

Refer to UF_GDT_set_limits_and_fits_tolerance_parms for documentation.

setLimitsDefined(boolean) - Method in interface nxopen.motion.JointDefine

Deprecated.

Deprecated in NX11.0.0. Use Motion.JointDefine#setUpperLimitDefined and Motion.JointDefine#setLowerLimitDefined instead.

setLimitsFromCurve(Curve) - Method in interface nxopen.die.DieLimitsBuilder

Set the limits from the endpoints of the input curve.

setLimitShading(boolean) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setLimitsOfSize(InspectionMethodBuilder.LimitsOfSizeTypes) - Method in interface nxopen.cam.InspectionAnalyzeBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setLimitsOfSizeMode(InspectionMethodBuilder.LimitsOfSizeTypes) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setLimitSteepByCutDirection(boolean) - Method in interface nxopen.cam.SurfaceRegions

License requirements: cam_base ("CAM BASE")
.

setLimitThicknessVariation(boolean) - Method in interface nxopen.cae.LaminateFillSetupBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setLimitTopolSwitchFinFlag(boolean) - Method in interface nxopen.geometricutilities.FacePlaneSelectionBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setLimitType(Limit) - Method in interface nxopen.cae.optimization.DAOConstraintBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setLimitType(JoggleBuilder.LimitTypes) - Method in interface nxopen.features.sheetmetal.JoggleBuilder

License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setLimitType(BracketBuilder.LimitTypes) - Method in interface nxopen.features.shipdesign.BracketBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setLimitType(EndCutBuilder.LimitTypes) - Method in interface nxopen.features.shipdesign.EndCutBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setLimitUnit(Unit) - Method in interface nxopen.cae.optimization.DAOConstraintBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setLimitValue(double) - Method in interface nxopen.cae.optimization.DAOConstraintBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setLimitValueOption(ElementQualitySetting.LimitValue) - Method in interface nxopen.cae.modelcheck.ElementQualitySetting

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setLine(NXObject) - Method in interface nxopen.cam.InspectionScanLineBuilder

License requirements: None.

setLine1Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setLine1LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setLine1PointLeft(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarWizardBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setLine1PointRight(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarWizardBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setLine1Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setLine1RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setLineAndArrowPreferences(LineAndArrowPreferences) - Method in interface nxopen.annotations.Annotation

Sets the line and arrow preferences for the annotation.

setLineAndArrowPreferences(LineAndArrowPreferences) - Method in interface nxopen.annotations.DimensionData

Sets the line and arrow preferences
License requirements: None.

setLineAndArrowPreferences(LineAndArrowPreferences) - Method in interface nxopen.annotations.SimpleDraftingAidPreferences

Sets the line and arrow preferences
License requirements: None.

setLineAndArrowPreferences(LineAndArrowPreferences) - Method in interface nxopen.preferences.AnnotationPreferences

Sets the global line and arrow preferences for the part
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setLineAntialiasing(boolean) - Method in interface nxopen.preferences.PartDrafting

Sets the flag indicating whether to display drawing using line antialiasing.

setLineAntialiasing(boolean) - Method in interface nxopen.preferences.SessionVisualizationVisual

Sets the line antialiasing flag.

setLinearAxis(Axis) - Method in interface nxopen.geometricutilities.ModlDistanceAngle

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setLinearCurveType(UserDefinedMotionBuilder.LinearCurveTypes) - Method in interface nxopen.tooling.UserDefinedMotionBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setLinearDensity(double) - Method in interface nxopen.routing.electrical.ElectricalStockDefinition

Sets the linear density of stock
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setLinearDimensionTolerance(double) - Method in interface nxopen.drawings.AnnotationSettingsBuilder

License requirements: convert_to_pmi (" Convert To PMI"), drafting ("DRAFTING")
.

setLinearDirection(Direction) - Method in interface nxopen.tooling.DefineCamBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setLinearFractionType(DimensionTextFormat) - Method in interface nxopen.annotations.UnitsStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setLinearLogOption(FieldEvaluator.LinearLogOptionEnum) - Method in interface nxopen.fields.FieldTable

License requirements: None.

setLinearMotion(int, PathLinearMotion) - Method in interface nxopen.cam.Path

Updates the data of the linear motion event at the given index
License requirements: None.

setLinearMotionVector(Direction) - Method in interface nxopen.tooling.UserDefinedMotionBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setLinearOrientationOption(PatternOrientation.Enum) - Method in interface nxopen.geometricutilities.PatternOrientation

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setLinearPathSettings(LinearPathSettings) - Method in interface nxopen.routing.LinearPathBuilder

Sets the settings that determine what constraints to apply to the new path.

setLinearPlaces(int) - Method in interface nxopen.cam.InspectionCmmCommandBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setLineArrowDisplayOption(OrdinateLineArrowDisplayOption) - Method in interface nxopen.annotations.OrdinateDimensionPreferences

Sets the dimension line and arrow display option
License requirements: None.

setLineArrowPreferences(UFDrf.LineArrowPreferences) - Method in interface nxopen.uf.UFDrf

Refer to UF_DRF_set_line_arrow_preferences for documentation.

setLinearSegments(int) - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilderEx

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setLinearTolerance(LinearTolerance) - Method in interface nxopen.annotations.DimensionData

Sets the linear tolerances
License requirements: None.

setLinearTolerance(double) - Method in interface nxopen.features.shipdesign.CopyObjectsBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setLinearTolerance(double) - Method in interface nxopen.features.shipdesign.CopyPasteNewBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setLinearToleranceFactor(double) - Method in interface nxopen.features.shipdesign.MirrorShipStructureBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setLinearTolerances(LinearTolerance) - Method in interface nxopen.preferences.AnnotationPreferences

Sets the global linear tolerances for the part
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setLinearTypeMode(SectionSurfaceBuilderEx.LinearType) - Method in interface nxopen.features.SectionSurfaceBuilderEx

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setLinearUnits(InspectionCmmCommandBuilder.LinearUnitsOptions) - Method in interface nxopen.cam.InspectionCmmCommandBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setLinearVelocityDirection(Direction) - Method in interface nxopen.mechatronics.RigidBodyBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setLineBetweenArrows(boolean) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setLineColor(NXColor) - Method in interface nxopen.display.GridBuilder

License requirements: None.

setLineColor(NXColor) - Method in interface nxopen.display.PlanarShipGridBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setLineColor(NXColor) - Method in interface nxopen.LineColorFontWidthBuilder

License requirements: None.

setLineColor(int) - Method in interface nxopen.markup.EditObjectDisplayBuilder

License requirements: None.

setLineColor(int) - Method in interface nxopen.preferences.SubdivisionModelingPreferences

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setLineDirection(Direction) - Method in interface nxopen.cam.InspectionLineFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setLineEndPoint(Point) - Method in interface nxopen.cam.InspectionOperationTransformBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setLineEndPoint(Point) - Method in interface nxopen.cam.OperationTransformBuilder

License requirements: cam_base ("CAM BASE")
.

setLineFont(DisplayableObject.ObjectFont) - Method in interface nxopen.DisplayableObject

License requirements: None.

setLineFont(DisplayPropertiesBuilder.LineFontEnum) - Method in interface nxopen.fields.DisplayPropertiesBuilder

License requirements: None.

setLineFont(LineFontBuilder.LineFontType) - Method in interface nxopen.LineFontBuilder

License requirements: None.

setLineFont(DisplayableObject.ObjectFont) - Method in interface nxopen.markup.EditObjectDisplayBuilder

License requirements: None.

setLineFont(PartObject.ObjectType, PartObject.LineFontType) - Method in interface nxopen.preferences.PartObject

Sets line font for specified object type
License requirements: None.

setLineFont(int) - Method in interface nxopen.preferences.SubdivisionModelingPreferences

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setLineFontAvailableOptions(int) - Method in interface nxopen.blockstyler.LineColorFontWidth

License requirements: None.

setLineFontDisplay(PartVisualizationLine.LineFontDisplayType) - Method in interface nxopen.preferences.PartVisualizationLine

Sets the line font display.

setLineFontMappingFile(String) - Method in interface nxopen.DxfdwgCreator

License requirements: None.

setLineFontMappingFile(String) - Method in interface nxopen.DxfdwgImporter

License requirements: None.

setLineFontType(ProductOutlineBuilder.LineFont) - Method in interface nxopen.assemblies.ProductOutlineBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setLineFontType(DisplayableObject.ObjectFont) - Method in interface nxopen.display.PlanarShipGridBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setLineFontValueAsString(String) - Method in interface nxopen.blockstyler.LineColorFontWidth

License requirements: None.

setLineImageType(ReflectionAnalysisBuilder.LineImageTypes) - Method in interface nxopen.geometricanalysis.ReflectionAnalysisBuilder

License requirements: None.

setLineIncrement(double) - Method in interface nxopen.blockstyler.AngularDimension

License requirements: None.

setLineIncrement(double) - Method in interface nxopen.blockstyler.DoubleBlock

License requirements: None.

setLineIncrement(double) - Method in interface nxopen.blockstyler.ExpressionBlock

License requirements: None.

setLineIncrement(double) - Method in interface nxopen.blockstyler.IntegerBlock

License requirements: None.

setLineIncrement(double) - Method in interface nxopen.blockstyler.LinearDimension

License requirements: None.

setLineIncrement(double) - Method in interface nxopen.blockstyler.OnPathDimension

License requirements: None.

setLineIncrement(double) - Method in interface nxopen.blockstyler.RadiusDimension

License requirements: None.

setLineLength(double) - Method in interface nxopen.drawings.SectionLineStyleBuilder

Deprecated.

Deprecated in NX10.0.0. Use ViewSectionLineBuilder.setLineLength(double) instead.

setLineLength(double) - Method in interface nxopen.drawings.ViewSectionLineBuilder

License requirements: drafting ("DRAFTING")
.

setLineMethod(InspectionOperationTransformBuilder.Line) - Method in interface nxopen.cam.InspectionOperationTransformBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setLineMethod(OperationTransformBuilder.Line) - Method in interface nxopen.cam.OperationTransformBuilder

License requirements: cam_base ("CAM BASE")
.

setLineNumber(ReflectionAnalysisBuilder.NumberOfLinesOptions) - Method in interface nxopen.geometricanalysis.ReflectionAnalysisBuilder

License requirements: None.

setLineNumberDisplayFlag(boolean) - Method in interface nxopen.cam.OperationDisplayOptionsBuilder

License requirements: cam_base ("CAM BASE")
.

setLineOption(AssociativityLineOption) - Method in interface nxopen.annotations.Associativity

Sets the line option
License requirements: None.

setLineOption(AssociativityLineOption) - Method in interface nxopen.annotations.AssociativityBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setLineOrientation(ReflectionAnalysisBuilder.LineOrientationType) - Method in interface nxopen.geometricanalysis.ReflectionAnalysisBuilder

License requirements: None.

setLinePartPath(String) - Method in interface nxopen.linedesigner.CreateSystemBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setLinePastArrowDistance(double) - Method in interface nxopen.annotations.LineAndArrowPreferences

Sets the line past arrow distance
License requirements: None.

setLinePastArrowDistance(double) - Method in interface nxopen.annotations.LineArrowStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setLinePastArrowDistance2(double) - Method in interface nxopen.annotations.LineAndArrowPreferences

Sets the 2nd line past arrow distance
License requirements: None.

setLinePastArrowDistance2(double) - Method in interface nxopen.annotations.LineArrowStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setLinePlaneType(SplitSubopCommand.LinePlaneTypes) - Method in interface nxopen.cam.SplitSubopCommand

License requirements: None.

setLinePoint(Point) - Method in interface nxopen.cam.InspectionOperationTransformBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setLinePoint(Point) - Method in interface nxopen.cam.OperationTransformBuilder

License requirements: cam_base ("CAM BASE")
.

setLineScale(double) - Method in interface nxopen.tooling.DieEngTrimAngleCheckBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setLineScan(boolean) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setLineSettingInheritted(boolean) - Method in interface nxopen.display.PlanarShipGridBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setLineSpaceFactor(double) - Method in interface nxopen.annotations.HoleCalloutSettingsBuilder

Sets the line space factor, which defines the vertical space between parameters.

setLineStartPoint(Point) - Method in interface nxopen.cam.InspectionOperationTransformBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setLineStartPoint(Point) - Method in interface nxopen.cam.OperationTransformBuilder

License requirements: cam_base ("CAM BASE")
.

setLineThickness(ReflectionAnalysisBuilder.LineThicknessType) - Method in interface nxopen.geometricanalysis.ReflectionAnalysisBuilder

License requirements: None.

setLineType(Polyline.LineOption) - Method in interface nxopen.markup.Polyline

License requirements: None.

setLineVector(Direction) - Method in interface nxopen.cam.InspectionOperationTransformBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setLineVector(Direction) - Method in interface nxopen.cam.OperationTransformBuilder

License requirements: cam_base ("CAM BASE")
.

setLineWidth(LineWidth) - Method in interface nxopen.annotations.HatchStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setLineWidth(DisplayableObject.ObjectWidth) - Method in interface nxopen.cae.MeshCollectorDisplayDefaults1d

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setLineWidth(DisplayableObject.ObjectWidth) - Method in interface nxopen.cae.MeshCollectorDisplayDefaults2d

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setLineWidth(DisplayableObject.ObjectWidth) - Method in interface nxopen.cae.MeshCollectorDisplayDefaults3d

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setLineWidth(DisplayableObject.ObjectWidth) - Method in interface nxopen.cae.MeshDisplaySettings1d

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setLineWidth(DisplayableObject.ObjectWidth) - Method in interface nxopen.cae.MeshDisplaySettings2d

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setLineWidth(DisplayableObject.ObjectWidth) - Method in interface nxopen.cae.MeshDisplaySettings3d

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setLineWidth(DisplayableObject.ObjectWidth) - Method in interface nxopen.DisplayableObject

License requirements: None.

setLineWidth(DisplayPropertiesBuilder.LineWidthEnum) - Method in interface nxopen.fields.DisplayPropertiesBuilder

License requirements: None.

setLineWidth(DisplayableObject.ObjectWidth) - Method in interface nxopen.LineColorFontWidthBuilder

License requirements: None.

setLineWidth(DisplayableObject.ObjectWidth) - Method in interface nxopen.markup.EditObjectDisplayBuilder

License requirements: None.

setLineWidth(int) - Method in interface nxopen.preferences.SubdivisionModelingPreferences

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setLineWidth(Tag, int) - Method in interface nxopen.uf.UFObj

Refer to UF_OBJ_set_line_width for documentation.

setLineWidthShowDefault(boolean) - Method in interface nxopen.blockstyler.LineColorFontWidth

License requirements: None.

setLineWidthShowDefaultAsOriginal(boolean) - Method in interface nxopen.blockstyler.LineColorFontWidth

License requirements: None.

setLineWidthShowNoChange(boolean) - Method in interface nxopen.blockstyler.LineColorFontWidth

License requirements: None.

setLineWidthType(DisplayableObject.ObjectWidth) - Method in interface nxopen.display.PlanarShipGridBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setLineWidthUseWideLines(boolean) - Method in interface nxopen.blockstyler.LineColorFontWidth

License requirements: None.

setLineWidthValue(int) - Method in interface nxopen.blockstyler.LineWidth

License requirements: None.

setLink(Feature) - Method in interface nxopen.geometricutilities.WaveLinkRepository

Set the link created by interpart selection
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setLink(Tag, UFMotion.Link) - Method in interface nxopen.uf.UFMotion

Refer to UF_MOTION_set_link for documentation.

setLinkData(Tag, Tag, Tag, boolean) - Method in interface nxopen.uf.UFWave

Refer to UF_WAVE_set_link_data for documentation.

setLinkedAndExtractedGeometryProperties(SessionModeling.LinkedAndExtractedGeometryPropertiesInheritance) - Method in interface nxopen.preferences.SessionModeling

Sets the linked and extracted geometry properties inheritance.

setLinkedPartNameToBeSavedAs(Part, String) - Method in interface nxopen.geometricutilities.RenameLinkedPartModulePartBuilder

Add linked part module part tag and its new name to perform "Save As" along with its main part.

setLinkedPartNameToBeSavedAs(Part[], String[]) - Method in interface nxopen.geometricutilities.RenameLinkedPartModulePartBuilder

Add multiple linked part module part tags and their new names to perform "Save As" along with its main part.

setLinkedPtAngle(Tag, Tag, Tag, Tag) - Method in interface nxopen.uf.UFWave

Refer to UF_WAVE_set_linked_pt_angle for documentation.

setLinkedPtCenter(Tag, Tag, Tag) - Method in interface nxopen.uf.UFWave

Refer to UF_WAVE_set_linked_pt_center for documentation.

setLinkedPtCurve(Tag, Tag, Tag, Tag) - Method in interface nxopen.uf.UFWave

Refer to UF_WAVE_set_linked_pt_curve for documentation.

setLinkedPtPoint(Tag, Tag, Tag) - Method in interface nxopen.uf.UFWave

Refer to UF_WAVE_set_linked_pt_point for documentation.

setLinkHandles(boolean) - Method in interface nxopen.features.StyledBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setLinkInitialVelocity(Tag) - Method in interface nxopen.uf.UFMotion

Refer to UF_MOTION_set_link_initial_velocity for documentation.

setLinkMassProperties(Tag, UFMotion.LinkMassProperties) - Method in interface nxopen.uf.UFMotion

Refer to UF_MOTION_set_link_mass_properties for documentation.

setLinkMcsRcs(boolean) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setLinkMirrorData(Tag, Tag, Tag, Tag, Tag, boolean) - Method in interface nxopen.uf.UFWave

Refer to UF_WAVE_set_link_mirror_data for documentation.

setLinkName(String) - Method in interface nxopen.cae.SimMotionLoadsListItemBuilder

License requirements: None.

setLinkRcsToMcs(boolean) - Method in interface nxopen.cam.OrientGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setLinkRegionData(Tag, int, Tag[], int, Tag[], Tag, boolean, boolean, boolean) - Method in interface nxopen.uf.UFWave

Refer to UF_WAVE_set_link_region_data for documentation.

setLinks(UserDefinedObject.LinkType, UserDefinedObject.LinkDefinition[]) - Method in interface nxopen.userdefinedobjects.UserDefinedObject

Sets all of the links with the given link type stored with this UDO.

setLinks(UserDefinedObject.LinkType, int, int, UserDefinedObject.LinkDefinition[]) - Method in interface nxopen.userdefinedobjects.UserDefinedObject

Replaces the links of the given link type stored with this UDO in the specified range with a new array of links
License requirements: None.

setLinkSheetBody(boolean) - Method in interface nxopen.tooling.IntermediateStageBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setLinkTransform(Tag, double[]) - Method in interface nxopen.uf.UFMotion

Refer to UF_MOTION_set_link_transform for documentation.

setLinkUpdateTime(Tag, Tag) - Method in interface nxopen.uf.UFWave

Refer to UF_WAVE_set_link_update_time for documentation.

setLinXnumber(int) - Method in interface nxopen.tooling.LayoutBuilder

License requirements: None.

setLinYnumber(int) - Method in interface nxopen.tooling.LayoutBuilder

License requirements: None.

SetList - Interface in nxopen.blockstyler

Represents a SetList block .

setList(ObjectList) - Method in interface nxopen.features.VarsweepBuilder

License requirements: None.

SetList.AddCallback - Interface in nxopen.blockstyler

Add callback

SetList.DeleteCallback - Interface in nxopen.blockstyler

Delete callback.

SetList.InsertionLocation - Class in nxopen.blockstyler

During Insert, indicates whether component should be inserted before or after the insertion location

SetList.ReorderCallback - Interface in nxopen.blockstyler

Reorder callback

setList1(DisplayableObject[]) - Method in interface nxopen.motion.PackagingBuilder

Sets geometry list 1.

setList2(DisplayableObject[]) - Method in interface nxopen.motion.PackagingInterferenceBuilder

Sets the geometry list 2 of PackagingInterference object.

setList2(DisplayableObject[]) - Method in interface nxopen.motion.PackagingMeasureBuilder

Sets the geometry list 2.

setListChildrenComponents(boolean) - Method in interface nxopen.tooling.RenameAndExportComponentBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setListDir(UnusedFileManagementBuilder.FileDirectory) - Method in interface nxopen.tooling.UnusedFileManagementBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setListExpanded(boolean) - Method in interface nxopen.blockstyler.SetList

License requirements: None.

setListFeatureSet(boolean) - Method in interface nxopen.weld.ConnectedFaceFinderBuilder

License requirements: ugweld ("UG WELD")
.

setListFeatureSet(boolean) - Method in interface nxopen.weld.ConnectionFinderBuilder

License requirements: ugweld ("UG WELD")
.

setListFile(String) - Method in interface nxopen.features.shipdesign.ProfileListBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setListHideGroup(boolean) - Method in interface nxopen.blockstyler.SetList

License requirements: None.

setListingDecimalPlaces(int) - Method in interface nxopen.preferences.SessionUserInterfaceUI

Sets the listing decimal places
License requirements: None.

setListingOptionState(ProjectNodesToCadGeometryBuilder.ListingOption) - Method in interface nxopen.cae.ProjectNodesToCadGeometryBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setListingType(DuplicateNodesCheckBuilder.ListOption) - Method in interface nxopen.cae.modelcheck.DuplicateNodesCheckBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setListItem(String) - Method in interface nxopen.tooling.FamilyMoldBuilder

License requirements: None.

setListItems(String[]) - Method in interface nxopen.blockstyler.ListBox

Sets the ListItems
License requirements: None.

setListItems(String[]) - Method in interface nxopen.blockstyler.StringBlock

Sets the ListItems
License requirements: None.

setListItems(String[]) - Method in interface nxopen.uistyler.MultiSelectList

Specifies an array of character strings for item names that are used as selectable choices for this dialog item.

setListItems(String[]) - Method in interface nxopen.uistyler.SelectionBox

Specifies an array of character strings for item names that are used as selectable choices for this dialog item.

setListItems(String[]) - Method in interface nxopen.uistyler.SingleSelectList

Specifies an array of character strings that are used as entries in the list
License requirements: None.

setListOfPointsToDraw(int, Point3d) - Method in interface nxopen.routing.QuickPathBuilder

Save a point or extension point to the list of all points to draw on the screen.

setListOfPointsToDrawCount(int) - Method in interface nxopen.routing.QuickPathBuilder

Set the number of elements in the list of all points to draw on the screen.

setListOutput(boolean) - Method in interface nxopen.cam.InspectionAnalyzeOutputBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setListOutput(boolean) - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setListOutput(boolean) - Method in interface nxopen.sim.SinumerikCaExportBuilder

License requirements: nx_sinumerik_ca ("Sinumerik Collision Avoidance")
.

setListValue(String) - Method in interface nxopen.annotations.PmiAttributeValueListBuilder

License requirements: None.

setLlr(int, double) - Method in interface nxopen.cae.DurabilityDamageEvaluationBuilder

Sets the lateral loading ratio.

setLmsSolverProperty(LmsSolverProperty) - Method in interface nxopen.motion.MotionSolutionBuilder

License requirements: mechanisms ("MECHANISMS")
.

setLoadAsSaved(boolean) - Method in interface nxopen.mechatronics.PreferencesBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setLoadCase(int) - Method in interface nxopen.cae.AfuHeaderId

Sets the load case of AFU Header Id
License requirements: nx_ftk ("NX Advanced Graphing")
.

setLoadcase(int) - Method in interface nxopen.cae.DurabilityFunctionExcitationBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setLoadcase(int) - Method in interface nxopen.cae.DurabilityLoadPatternBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setLoadCase(int) - Method in interface nxopen.cae.optimization.DAOConstraintBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setLoadCase(int) - Method in interface nxopen.cae.optimization.DAOObjective

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setLoadcase(ResultProbeBuilder.LoadcaseSelection) - Method in interface nxopen.cae.ResultProbeBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setLoadcaseIndex(int) - Method in interface nxopen.cae.ResultProbeBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setLoadcaseIteration(int, int) - Method in interface nxopen.cae.ResultParameters

Deprecated.

Deprecated in NX8.0.0. Use ResultParameters.setGenericResultType(nxopen.cae.BaseResultType) instead.

setLoadcaseName(String) - Method in interface nxopen.cae.ResultsManipulationBuilder

The load case name
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setLoadCases(TBSLoadCase[]) - Method in interface nxopen.cae.optimization.TBSLoadCaseManager

Sets the load cases
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setLoadComponentFlag(boolean) - Method in interface nxopen.uf.UFGdt

Refer to UF_GDT_set_load_component_flag for documentation.

setLoadComponentOnFacetedViewSelection(boolean) - Method in interface nxopen.preferences.SessionDrafting

Sets the load on selection flag
License requirements: None.

setLoadComponentOnFacetedViewUpdate(boolean) - Method in interface nxopen.preferences.SessionDrafting

Sets the load on update flag
License requirements: None.

setLoadComponentsOnDemand(boolean) - Method in interface nxopen.drawings.ViewWorkflowBuilder

License requirements: drafting ("DRAFTING")
.

setLoadConditionHandlingType(SimLoadRecipeTypes.LoadConditionHandling) - Method in interface nxopen.cae.SimLoadRecipe

Sets the type of load conditions handling of the SimLoadRecipe
License requirements: nx_masterfem ("Finite Element Modeling")

Created in NX10.0.0

setLoadConstructionGeometry(boolean) - Method in interface nxopen.preferences.SessionNXGateway

Sets the load construction geometry flag for I-DEAS
License requirements: None.

setLoadDBOnly(boolean) - Method in interface nxopen.tooling.DieBaseBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setLoadedPartInfo(TaggedObject, TaggedObject) - Method in interface nxopen.routing.PlacePartBuilder

Get information about the parts being placed.

setLoadExact(boolean) - Method in interface nxopen.preferences.ViewSection

License requirements: None.

setLoading(String) - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setLoading(String) - Method in interface nxopen.features.vehicledesign.DynamicCurbBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setLoading(String) - Method in interface nxopen.features.vehicledesign.GroundClearanceBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setLoading(String) - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setLoading(String) - Method in interface nxopen.features.vehicledesign.InnerAngleBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setLoading(String) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setLoading(String) - Method in interface nxopen.features.vehicledesign.OilPanBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setLoading(String) - Method in interface nxopen.features.vehicledesign.PendulumPlacementBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setLoading(String) - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setLoading(String) - Method in interface nxopen.features.vehicledesign.WheelFixingBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setLoadingName(String) - Method in interface nxopen.features.vehicledesign.VisionPlaneBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setLoadingName(String) - Method in interface nxopen.features.vehicledesign.WindshieldDatumBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setLoadingType(DDAMExcitation.LoadingType) - Method in interface nxopen.cae.responsesimulation.DDAMExcitationBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setLoadingTypeOption(DDAMComponentData.LoadingType) - Method in interface nxopen.cae.responsesimulation.DDAMComponentData

License requirements: nx_response_anlys ("NX Response Analysis")
.

setLoadLatest(boolean) - Method in interface nxopen.LoadOptions

Sets the option that specifies whether the system searches for the latest component according to the version rules, or looks for the exact match.

setLoadOption(RenameAndExportComponentBuilder.LoadOptionType) - Method in interface nxopen.tooling.RenameAndExportComponentBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setLoadPartialComponents(boolean) - Method in interface nxopen.MassPropertiesBuilder

License requirements: None.

setLoadPointDataWithPart(boolean) - Method in interface nxopen.display.PointCloudBuilder

License requirements: nx_point_cloud_view ("NX Point Cloud Viewer")
.

setLoadProductManufacturingInformation(boolean) - Method in interface nxopen.preferences.SessionNXGateway

Sets the load product manufacturing information flag for I-DEAS
License requirements: None.

setLoadProportionality(boolean) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setLoadProportionality(boolean) - Method in interface nxopen.cae.DurabilityResultsReportBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setLoadReferencedGeometry(boolean) - Method in interface nxopen.positioning.MatingConverter

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setLoadRequirements(double) - Method in interface nxopen.linedesigner.CoverFeatureBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setLoadRequirements(double) - Method in interface nxopen.linedesigner.HoleFeatureBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setLoads(SimLoad[]) - Method in interface nxopen.cae.ImportSimulationBuilder

Set selected loads to import
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setLoads(SimLoad[]) - Method in interface nxopen.cae.MechanicalLoadSumBuilder

Sets the loads
License requirements: nx_masterfem ("Finite Element Modeling")
.

setLoadSolidEdgeAssemblyFeatures(boolean) - Method in interface nxopen.preferences.SessionNXGateway

Sets the Assembly-level features flag for Solid Edge
License requirements: None.

setLoadSolidEdgeConstructionGeometry(boolean) - Method in interface nxopen.preferences.SessionNXGateway

Sets the load construction geometry flag for Solid Edge
License requirements: None.

setLoadSolidEdgeProductManufacturingInformation(boolean) - Method in interface nxopen.preferences.SessionNXGateway

Sets the load product manufacturing information flag for Solid Edge
License requirements: None.

setLoadVectorScale(double, boolean) - Method in interface nxopen.motion.LoadTransferControl

Sets load vector scale
License requirements: mechanisms ("MECHANISMS")
.

setLoc(Result.Location) - Method in interface nxopen.cae.ResultVariable

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setLocalHeadOrientType(LaserControlPoint.HeadOrientTypes) - Method in interface nxopen.cam.LaserControlPoint

License requirements: cam_base ("CAM BASE")
.

setLocalize(boolean) - Method in interface nxopen.blockstyler.Button

License requirements: None.

setLocalize(boolean) - Method in interface nxopen.blockstyler.DoubleBlock

License requirements: None.

setLocalize(boolean) - Method in interface nxopen.blockstyler.Enumeration

License requirements: None.

setLocalize(boolean) - Method in interface nxopen.blockstyler.Explorer

License requirements: None.

setLocalize(boolean) - Method in interface nxopen.blockstyler.Group

License requirements: None.

setLocalize(boolean) - Method in interface nxopen.blockstyler.IntegerBlock

License requirements: None.

setLocalize(boolean) - Method in interface nxopen.blockstyler.Label

License requirements: None.

setLocalize(boolean) - Method in interface nxopen.blockstyler.ListBox

License requirements: None.

setLocalize(boolean) - Method in interface nxopen.blockstyler.MultilineString

License requirements: None.

setLocalize(boolean) - Method in interface nxopen.blockstyler.ObjectColorPicker

License requirements: None.

setLocalize(boolean) - Method in interface nxopen.blockstyler.RGBColorPicker

License requirements: None.

setLocalize(boolean) - Method in interface nxopen.blockstyler.StringBlock

License requirements: None.

setLocalize(boolean) - Method in interface nxopen.blockstyler.TabControl

License requirements: None.

setLocalize(boolean) - Method in interface nxopen.blockstyler.Table

License requirements: None.

setLocalize(boolean) - Method in interface nxopen.blockstyler.Toggle

License requirements: None.

setLocalize(boolean) - Method in interface nxopen.blockstyler.Tree

License requirements: None.

setLocalize(boolean) - Method in interface nxopen.blockstyler.Wizard

License requirements: None.

setLocalMaxPenetration(double) - Method in interface nxopen.motion.BodyContactRecurdyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using BodyContactRecurdyn.localMaxPenetrationExpression() to query or edit it.

setLocalOrigin(Point3d) - Method in interface nxopen.display.BoundedGridBuilder

License requirements: None.

setLocalResultFile(String, String) - Method in interface nxopen.cae.SimResultReference

Specify local result file
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setLocalResultFile(String, String) - Method in interface nxopen.cae.SimSolution

Deprecated.

Deprecated in NX10.0.0. Use SimResultReference :SimSolution.setLocalResultFile(java.lang.String, java.lang.String) instead.

setLocalReturnFinishMode(NcmTurnThreadBuilder.LocalReturnModes) - Method in interface nxopen.cam.NcmTurnThreadBuilder

License requirements: cam_base ("CAM BASE")
.

setLocalReturnFinishMove(NcmTurnThreadBuilder.LocalReturnTypes) - Method in interface nxopen.cam.NcmTurnThreadBuilder

License requirements: cam_base ("CAM BASE")
.

setLocalReturnFinishNumberOfPasses(int) - Method in interface nxopen.cam.NcmTurnThreadBuilder

License requirements: cam_base ("CAM BASE")
.

setLocalReturnFinishPoint(Point) - Method in interface nxopen.cam.NcmTurnThreadBuilder

License requirements: cam_base ("CAM BASE")
.

setLocalReturnMode(NcmTurnThreadBuilder.LocalReturnMainModes) - Method in interface nxopen.cam.NcmTurnThreadBuilder

License requirements: cam_base ("CAM BASE")
.

setLocalReturnMove(NcmTurnThreadBuilder.LocalReturnTypes) - Method in interface nxopen.cam.NcmTurnThreadBuilder

License requirements: cam_base ("CAM BASE")
.

setLocalReturnPoint(Point) - Method in interface nxopen.cam.NcmTurnThreadBuilder

License requirements: cam_base ("CAM BASE")
.

setLocalReturnRoughMode(NcmTurnThreadBuilder.LocalReturnModes) - Method in interface nxopen.cam.NcmTurnThreadBuilder

License requirements: cam_base ("CAM BASE")
.

setLocalReturnRoughMove(NcmTurnThreadBuilder.LocalReturnTypes) - Method in interface nxopen.cam.NcmTurnThreadBuilder

License requirements: cam_base ("CAM BASE")
.

setLocalReturnRoughNumberOfPasses(int) - Method in interface nxopen.cam.NcmTurnThreadBuilder

License requirements: cam_base ("CAM BASE")
.

setLocalReturnRoughPoint(Point) - Method in interface nxopen.cam.NcmTurnThreadBuilder

License requirements: cam_base ("CAM BASE")
.

setLocalSubdivision(CfdAutoRefinementConstraintBuilder.LocalSubdivisions) - Method in interface nxopen.cae.CfdAutoRefinementConstraintBuilder

License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")
.

setLocalSubdivision(CfdContactPreventionConstraintBuilder.LocalSubdivisions) - Method in interface nxopen.cae.CfdContactPreventionConstraintBuilder

License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")
.

setLocalSubdivision(CfdLocalResolutionConstraintBuilder.LocalSubdivisions) - Method in interface nxopen.cae.CfdLocalResolutionConstraintBuilder

License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")
.

setLocatedPoint(Point) - Method in interface nxopen.tooling.ConceptPositionBuilder

License requirements: None.

setLocateXrot(boolean) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setLocateXtrans(boolean) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setLocateYrot(boolean) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setLocateYtrans(boolean) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setLocateZrot(boolean) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setLocateZtrans(boolean) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setLocation(WeldBuilder.WeldLocation) - Method in interface nxopen.cae.WeldBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setLocation(NXObject) - Method in interface nxopen.cam.SolidTrackingBuilder

License requirements: None.

setLocation(KeywayBuilder.LocationType) - Method in interface nxopen.die.KeywayBuilder

License requirements: ug_die_design ("Die Design")
.

setLocation(KeywayChildBuilder.LocationOption) - Method in interface nxopen.die.KeywayChildBuilder

Sets the location of the keyway.

setLocation(ILocation) - Method in interface nxopen.die.PadChildBuilder

Sets the location of the die pad.

setLocation(Point) - Method in interface nxopen.features.VariableRadiusPointsBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setLocation(MirrorCertificationBuilder.LocationType) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setLocation(PendulumPlacementBuilder.LocationType) - Method in interface nxopen.features.vehicledesign.PendulumPlacementBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setLocation(String) - Method in interface nxopen.issue.IssueBriefcase

License requirements: nx_issue_mgmt ("NX Issue Tracking")
.

setLocation(Layout2dDefinitionLocation) - Method in interface nxopen.layout2d.ComponentNameBuilder

License requirements: drafting ("DRAFTING")
.

setLocation(Layout2dDefinitionLocation) - Method in interface nxopen.layout2d.DefineComponentBuilder

Sets the location type of the component indicating local, native or team center
License requirements: nx_layout ("NX Layout")
.

setLocation(Layout2dDefinitionLocation) - Method in interface nxopen.layout2d.InsertComponentBuilder

Sets the location type of the 2D Component indicating local, native or team center
License requirements: nx_layout ("NX Layout")
.

setLocation(Layout2dDefinitionLocation) - Method in interface nxopen.layout2d.MakeComponentUniqueBuilder

Sets the location type of the 2D Component indicating local, native or team center
License requirements: nx_layout ("NX Layout")
.

setLocation(Layout2dDefinitionLocation) - Method in interface nxopen.layout2d.PublishComponentBuilder

License requirements: nx_layout ("NX Layout")
.

setLocation(Layout2dDefinitionLocation) - Method in interface nxopen.layout2d.ReplaceComponentBuilder

License requirements: nx_layout ("NX Layout")
.

setLocation(Point2d) - Method in interface nxopen.markup.MarkupObject

Sets the location
License requirements: None.

setLocation(WeldPointLocation) - Method in interface nxopen.weld.WeldPointBuilder

Sets the processing method to use for generating weld points along reference section(s)
License requirements: ugweld ("UG WELD")
.

setLocationCoordinateSystem(CoordinateSystem) - Method in interface nxopen.Print3dBuilder

License requirements: None.

setLocationCoords(Point3d) - Method in interface nxopen.cae.FreeBodyResultsBuilder

The location definition method by coordinates
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setLocationCsys(int) - Method in interface nxopen.cae.FreeBodyResultsBuilder

The location definition method by coordinate system origin
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setLocationCsysSource(Result.CoordinateSystemSource) - Method in interface nxopen.cae.FreeBodyResultsBuilder

The source for the location coordinate system
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setLocationElement(FEElement) - Method in interface nxopen.cae.SimBcXyPlotBuilder

Sets location at an element
License requirements: nx_masterfem ("Finite Element Modeling")
.

setLocationElementEdge(FEElemEdge) - Method in interface nxopen.cae.SimBcXyPlotBuilder

Sets location at an element edge
License requirements: nx_masterfem ("Finite Element Modeling")
.

setLocationElementFace(FEElemFace) - Method in interface nxopen.cae.SimBcXyPlotBuilder

Sets location at an element face
License requirements: nx_masterfem ("Finite Element Modeling")
.

setLocationId(int) - Method in interface nxopen.cae.FreeBodyResultsBuilder

The location definition method by node id
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setLocationMethod(FreeBodyResultsBuilder.LocationMethod) - Method in interface nxopen.cae.FreeBodyResultsBuilder

The location definition method
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setLocationNode(FENode) - Method in interface nxopen.cae.SimBcXyPlotBuilder

Sets location at a node
License requirements: nx_masterfem ("Finite Element Modeling")
.

setLocationObjects(NXObject[]) - Method in interface nxopen.routing.DesignRuleViolationLocation

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setLocationOffset(double) - Method in interface nxopen.die.PadChildBuilder

Sets the location offset of the die pad.

setLocationOffset(double) - Method in interface nxopen.die.PadParentBuilder

Sets the location offset of die pads.

setLocationOffsetDirection(IReferenceAxis) - Method in interface nxopen.die.PadChildBuilder

Sets the location offset direction of the die pad.

setLocationOnFlange(boolean) - Method in interface nxopen.die.ClampingSlotBuilder

License requirements: ug_die_design ("Die Design")
.

setLocationOption(JointmarkGuideBuilder.Location) - Method in interface nxopen.weld.JointmarkGuideBuilder

License requirements: ugweld ("UG WELD")
.

setLocationOptionAsString(String) - Method in interface nxopen.blockstyler.OnPathDimension

License requirements: None.

setLocationParameters(NXObject) - Method in interface nxopen.cam.InspectionProbeTrackingBuilder

Set the trackpoint location and default parameters
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setLocationPointX(double) - Method in interface nxopen.cam.InspectionCparlnFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setLocationPointY(double) - Method in interface nxopen.cam.InspectionCparlnFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setLocationPointZ(double) - Method in interface nxopen.cam.InspectionCparlnFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setLocations(DesignRuleViolationLocation[]) - Method in interface nxopen.routing.DesignRuleViolation

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setLocationType(AddendumSectionBuilder.SectionLocationType) - Method in interface nxopen.die.AddendumSectionBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setLocatorDepth(String) - Method in interface nxopen.die.WearPlateLocChildBuilder

License requirements: ug_die_design ("Die Design")
.

setLocatorDepth(String) - Method in interface nxopen.die.WearPlateLocParentBuilder

License requirements: ug_die_design ("Die Design")
.

setLocatorLetter(String) - Method in interface nxopen.annotations.LocatorDesignatorBuilder

License requirements: None.

setLocatorPosition(WearPlateLocChildBuilder.PositionType) - Method in interface nxopen.die.WearPlateLocChildBuilder

Sets the locator position of die wear plate and locators
License requirements: ug_die_design ("Die Design")
.

setLocatorPosition(WearPlateLocParentBuilder.PositionType) - Method in interface nxopen.die.WearPlateLocParentBuilder

Sets the locator position of die wear plate and locators
License requirements: ug_die_design ("Die Design")
.

setLocatorType(String) - Method in interface nxopen.annotations.LocatorDesignatorBuilder

License requirements: None.

setLocatorWidth(String) - Method in interface nxopen.die.WearPlateLocChildBuilder

License requirements: ug_die_design ("Die Design")
.

setLocatorWidth(String) - Method in interface nxopen.die.WearPlateLocParentBuilder

License requirements: ug_die_design ("Die Design")
.

setLock(boolean) - Method in interface nxopen.annotations.TitleBlockCellBuilder

License requirements: drafting ("DRAFTING")
.

setLockAngle(double) - Method in interface nxopen.cae.LaminateLockAngleBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setLockAngle(boolean) - Method in interface nxopen.routing.LinearPathSettings

License requirements: routing_base ("Routing Basic")
.

setLockAspectRatio(boolean) - Method in interface nxopen.display.ImageBaseBuilder

License requirements: None.

setLockAxis(RotaryPolarMoveBuilder.LockAxisDirection) - Method in interface nxopen.cam.RotaryPolarMoveBuilder

License requirements: None.

setLockBoundary(boolean) - Method in interface nxopen.facet.DecimateFacetBodyBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setLockBoundary(boolean) - Method in interface nxopen.facet.SmoothFacetBodyBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setLocked(Tag, String, boolean) - Method in interface nxopen.uf.UFAttr

Deprecated.

The equivalent Open C method has retired

setLockEngagement(boolean) - Method in interface nxopen.routing.ClockPartBuilder

Set EngagementLock of builder attribute
License requirements: routing_base ("Routing Basic")
.

setLockInterval1(boolean) - Method in interface nxopen.geometricanalysis.sectionanalysis.GridSpacingBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setLockInterval2(boolean) - Method in interface nxopen.geometricanalysis.sectionanalysis.GridSpacingBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setLockLength(boolean) - Method in interface nxopen.routing.EditLineSegmentBuilder

Sets the lock length flag.

setLockLength(boolean) - Method in interface nxopen.routing.LinearPathSettings

License requirements: routing_base ("Routing Basic")
.

setLockOffset(boolean) - Method in interface nxopen.drawings.ViewPlacementBuilder

License requirements: drafting ("DRAFTING")
.

setLockOnSave(boolean) - Method in interface nxopen.AttributePropertiesBaseBuilder

License requirements: None.

setLockOnSave(boolean) - Method in interface nxopen.AttributeTemplatesBuilder

License requirements: None.

setLockOrientation(boolean) - Method in interface nxopen.SketchPatternBuilder

License requirements: None.

setLockOriginalAspectRatio(boolean) - Method in interface nxopen.report.ImageOption

License requirements: None.

setLockPartsListSetup(boolean) - Method in interface nxopen.annotations.PartsListBuilder

License requirements: None.

setLockPitchAndWidth(boolean) - Method in interface nxopen.tooling.BlankLayoutBuilder

License requirements: None.

setLockPlane(RotaryPolarMoveBuilder.LockPlaneType) - Method in interface nxopen.cam.RotaryPolarMoveBuilder

License requirements: None.

setLockPlanes(boolean) - Method in interface nxopen.display.DynamicSectionBuilder

License requirements: None.

setLockPoles(boolean) - Method in interface nxopen.features.StudioXformBuilderEx

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setLockPos(double) - Method in interface nxopen.cam.RotaryPolarMoveBuilder

License requirements: None.

setLockRegionUEndFlexibility(int) - Method in interface nxopen.features.StudioXformBuilder

Deprecated.

Deprecated in NX8.5.0. Use StudioXformBuilderEx instead.

setLockRegionUEndFlexibility(int) - Method in interface nxopen.features.StudioXformBuilderEx

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setLockRegionUStartFlexibility(int) - Method in interface nxopen.features.StudioXformBuilder

Deprecated.

Deprecated in NX8.5.0. Use StudioXformBuilderEx instead.

setLockRegionUStartFlexibility(int) - Method in interface nxopen.features.StudioXformBuilderEx

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setLockRegionVEndFlexibility(int) - Method in interface nxopen.features.StudioXformBuilder

Deprecated.

Deprecated in NX8.5.0. Use StudioXformBuilderEx instead.

setLockRegionVEndFlexibility(int) - Method in interface nxopen.features.StudioXformBuilderEx

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setLockRegionVStartFlexibility(int) - Method in interface nxopen.features.StudioXformBuilder

Deprecated.

Deprecated in NX8.5.0. Use StudioXformBuilderEx instead.

setLockRegionVStartFlexibility(int) - Method in interface nxopen.features.StudioXformBuilderEx

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setLockRotation(boolean) - Method in interface nxopen.routing.ClockPartBuilder

Set RotationLock of builder attribute
License requirements: routing_base ("Routing Basic")
.

setLockRotations(boolean) - Method in interface nxopen.View

Sets the "Lock Rotations" toggle state of a view.

setLockState() - Method in interface nxopen.MWUpdate

Utility function for reseting update lock and perform update
License requirements: None.

setLockStatus(boolean) - Method in interface nxopen.annotations.BaseCustomSymbolBuilder

License requirements: drafting ("DRAFTING")
.

setLockStatus(boolean) - Method in interface nxopen.cae.Mesh

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setLockTableContents(boolean) - Method in interface nxopen.annotations.TabularNoteStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setLockTableFormat(boolean) - Method in interface nxopen.annotations.TabularNoteStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setLockToSelectedFlag(boolean) - Method in interface nxopen.routing.SplinePathBuilder

Sets whether the spline will attempt to lock points to selected object.

setLockToSelectedObject(boolean) - Method in interface nxopen.routing.LinearPathSettings

License requirements: routing_base ("Routing Basic")
.

setLockUpdateStatus(boolean) - Method in interface nxopen.layout2d.Component

License requirements: nx_layout ("NX Layout")
.

setLockWrist(boolean) - Method in interface nxopen.features.HumanBuilder

License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setLockx(boolean) - Method in interface nxopen.tooling.MoldCsysBuilder

License requirements: None.

setLocky(boolean) - Method in interface nxopen.tooling.MoldCsysBuilder

License requirements: None.

setLockz(boolean) - Method in interface nxopen.tooling.MoldCsysBuilder

License requirements: None.

setLogDecades(int) - Method in interface nxopen.cae.xyplot.AxisStyleSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setLogfile(String) - Method in interface nxopen.uf.UFClone

Refer to UF_CLONE_set_logfile for documentation.

setLogFileDirectory(String) - Method in interface nxopen.validate.ValidatorOptions

License requirements: None.

setLogFileLocation(String) - Method in interface nxopen.drawings.ConversionProcessSettingsBuilder

License requirements: convert_to_pmi (" Convert To PMI"), drafting ("DRAFTING")
.

setLogFileMode(ValidatorOptions.LogModeTypes) - Method in interface nxopen.validate.ValidatorOptions

License requirements: None.

setLogical(String, boolean) - Method in interface nxopen.blockstyler.PropertyList

Sets the logical value for the given property name.

setLogical(String, boolean) - Method in interface nxopen.PropertyContainer

Sets the logical value for the given property name.

setLogicalDesignObject(NXObject) - Method in interface nxopen.mechanicalrouting.PartPlacementBuilder

License requirements: routing_base ("Routing Basic")
.

setLogicalName(String) - Method in interface nxopen.annotations.SymbolCatalogParameterBuilder

License requirements: nx_layout ("NX Layout")
.

setLogicalObject(LogicObject) - Method in interface nxopen.mechatronics.ComparisonResult

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setLogicalValue(String) - Method in interface nxopen.mechatronics.ComparisonResultAttribute

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setLogicalValue(boolean) - Method in interface nxopen.SpreadsheetCellData

License requirements: None.

setLogicalValue(UFCamPref.CamPref, boolean) - Method in interface nxopen.uf.UFCamPref

Refer to UF_CAM_PREF_set_logical_value for documentation.

setLogicalValue(Tag, int, boolean) - Method in interface nxopen.uf.UFParam

Refer to UF_PARAM_set_logical_value for documentation.

setLogicalValueOfAttribute(UFVariant, String, boolean) - Method in interface nxopen.uf.UFMfm

Refer to UF_MFM_set_logical_value_of_attribute for documentation.

setLongDescription(String) - Method in interface nxopen.routing.DesignRuleViolation

Sets the long description of the design rule violation is returned
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setLongFacets(CleanupFacetBodyBuilder.CleanupOptions) - Method in interface nxopen.facet.CleanupFacetBodyBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setLongitudeScale(double) - Method in interface nxopen.display.IrayPlusSimpleMaterialEditorBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setLongitudinal(double) - Method in interface nxopen.motion.BushingCylindricalCoefficientsComponent

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using Motion.BushingCylindricalCoefficientsComponent#longitudinalExpression to query or edit it.

setLongitudinalEffects(boolean) - Method in interface nxopen.motion.TirePropertyHighOrderParameters

License requirements: mechanisms ("MECHANISMS")
.

setLongitudinalFunction(Function) - Method in interface nxopen.motion.BushingCylindricalCoefficientsComponent

License requirements: mechanisms ("MECHANISMS")
.

setLongitudinalYFrames(boolean) - Method in interface nxopen.annotations.BaseFrameBarBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setLongitudinalYFramesExtendBegin(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setLongitudinalYFramesExtendColor(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setLongitudinalYFramesExtendFont(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setLongitudinalYFramesExtendFrequency(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setLongitudinalYFramesExtendLength(double) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setLongitudinalYFramesExtendWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setLongitudinalYFramesLabelColor(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setLongitudinalYFramesLabelFont(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setLongitudinalYFramesLabelItalicized(boolean) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setLongitudinalYFramesLabelName(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setLongitudinalYFramesLabelWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setLongitudinalYFramesSkipLabelBegin(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setLongitudinalYFramesSkipLabelFrequency(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setLongitudinalYFramesSkipTicBegin(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setLongitudinalYFramesSkipTicFrequency(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setLongitudinalYFramesTicColor(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setLongitudinalYFramesTicDisplay(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setLongitudinalYFramesTicFont(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setLongitudinalYFramesTicLength(double) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setLongitudinalYFramesTicWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setLongitudinalZFrames(boolean) - Method in interface nxopen.annotations.BaseFrameBarBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setLongitudinalZFramesExtendBegin(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setLongitudinalZFramesExtendColor(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setLongitudinalZFramesExtendFont(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setLongitudinalZFramesExtendFrequency(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setLongitudinalZFramesExtendLength(double) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setLongitudinalZFramesExtendWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setLongitudinalZFramesLabelColor(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setLongitudinalZFramesLabelFont(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setLongitudinalZFramesLabelItalicized(boolean) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setLongitudinalZFramesLabelName(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setLongitudinalZFramesLabelWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setLongitudinalZFramesSkipLabelBegin(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setLongitudinalZFramesSkipLabelFrequency(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setLongitudinalZFramesSkipTicBegin(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setLongitudinalZFramesSkipTicFrequency(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setLongitudinalZFramesTicColor(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setLongitudinalZFramesTicDisplay(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setLongitudinalZFramesTicFont(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setLongitudinalZFramesTicLength(double) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setLongitudinalZFramesTicWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setLookahead(String, int) - Method in interface nxopen.sim.MachineToolConfiguration

Sets the controller lookahead, which indicates how many lines are evaluate from the controller ahead.

setLoopType(MeshFromBoundaryBuilder.LoopOption) - Method in interface nxopen.cae.MeshFromBoundaryBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setLoopType(RapidSurfaceBuilder.LoopTypes) - Method in interface nxopen.features.RapidSurfaceBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setLowerArea(SeatBeltAnchorageBuilder.LowerAreaType) - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setLowerBase(Plane) - Method in interface nxopen.die.TrimFlangeDieAssistantBuilder

License requirements: ug_die_design ("Die Design")
.

setLowerBound(double) - Method in interface nxopen.cae.ModelUpdateDesignVariable

Sets lower bound
License requirements: nx_correl_update ("FE Model Update")
.

setLowerBound(double) - Method in interface nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder

License requirements: nx_correl_update ("FE Model Update")
.

setLowerBound(String) - Method in interface nxopen.visualreporting.GroupLabel

License requirements: nx_visual_reporting ("Visual Reporting")
.

setLowerBoundFreq(double) - Method in interface nxopen.cae.LaminateRandomEventBuilder

Deprecated.

Deprecated in NX10.0.0. Use LaminateDynamicEventBuilder.setLowerBoundFrequency(double) instead.

setLowerBoundFrequency(double) - Method in interface nxopen.cae.LaminateDynamicEventBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setLowerBoundOfGroupLabel(GroupLabel, String) - Method in interface nxopen.visualreporting.VisualReportBuilder

Sets the GroupLabel.lowerBound() of the given GroupLabel .

setLowerDeckThickness(double) - Method in interface nxopen.tooling.DieDesignLowerBinderBuilder

License requirements: ug_die_design ("Die Design")
.

setLowerDMS(String) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setLowerLimit(double) - Method in interface nxopen.cae.optimization.DAODesignVariableBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setLowerLimit(double) - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder

License requirements: cam_base ("CAM BASE")
.

setLowerLimit(SeatBeltAnchorageBuilder.LowerLimitType) - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setLowerLimit(double) - Method in interface nxopen.motion.JointDefine

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using Motion.JointDefine#lowerLimitExpression or Motion.JointDefine#lowerLimitAngleExpression to query or edit it.

setLowerLimit(double) - Method in interface nxopen.sim.KinematicAxisBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setLowerLimitDefined(boolean) - Method in interface nxopen.motion.JointDefine

Sets the option of defining lower limit for joint
License requirements: mechanisms ("MECHANISMS")
.

setLowerLimitEnabled(boolean) - Method in interface nxopen.positioning.Constraint

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setLowerLimitMode(MillOrientGeomBuilder.LowerLimitModes) - Method in interface nxopen.cam.MillOrientGeomBuilder

Sets the lower limit mode
License requirements: cam_base ("CAM BASE")
.

setLowerLimitPlane(NXObject) - Method in interface nxopen.cam.MillOrientGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setLowerLimitPlaneData(Tag, double[], double[]) - Method in interface nxopen.uf.UFCam

Refer to UF_CAM_set_lower_limit_plane_data for documentation.

setLowerLimitPlaneStatus(Tag, UFParam.LwplaneStatus) - Method in interface nxopen.uf.UFCam

Refer to UF_CAM_set_lower_limit_plane_status for documentation.

setLowerLimitPlaneTag(Tag, Tag) - Method in interface nxopen.uf.UFCam

Refer to UF_CAM_set_lower_limit_plane_tag for documentation.

setLowerLimitPlaneUsage(Tag, UFParam.LwplaneUsage) - Method in interface nxopen.uf.UFCam

Refer to UF_CAM_set_lower_limit_plane_usage for documentation.

setLowerLimitRightHandSide(String) - Method in interface nxopen.positioning.Constraint

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setLowerLimitType(TurnRoughFinishLocalReturnBuilder.LimitTypes) - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder

Set the lower limits mode
License requirements: cam_base ("CAM BASE")
.

setLowerMetricToleranceValue(double) - Method in interface nxopen.annotations.Dimension

Sets a setting to control the metric lower tolerance value of a dimension.

setLowerPlane(double) - Method in interface nxopen.cam.WedmBasedGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setLowerPlane(boolean) - Method in interface nxopen.features.vehicledesign.VisionPlaneBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setLowerRadius(String) - Method in interface nxopen.die.ThroatChildBuilder

License requirements: ug_die_design ("Die Design")
.

setLowerSoftLimit(double) - Method in interface nxopen.sim.KinematicAxisBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setLowerSource(InspectionToleranceOperationBuilder.ToleranceSource) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setLowerText(String) - Method in interface nxopen.annotations.IdSymbolBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setLowerTextText(String) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder

License requirements: None.

setLowerTextType(SearchModelViewBuilder.TextComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder

License requirements: None.

setLowerThreshold(double) - Method in interface nxopen.drafting.AutomationRuleBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setLowerTolerance(double) - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder

License requirements: drafting ("DRAFTING")
.

setLowerTolerance(double) - Method in interface nxopen.annotations.SurfaceFinishBuilder

License requirements: None.

setLowerToleranceDegrees(Value) - Method in interface nxopen.annotations.AngularTolerance

Sets the lower tolerance in degrees
License requirements: None.

setLowerToleranceDegrees(double) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setLowerToleranceEnglish(double) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setLowerToleranceInches(Value) - Method in interface nxopen.annotations.LinearTolerance

Sets the lower tolerance value in inches
License requirements: None.

setLowerToleranceMetric(double) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setLowerToleranceMm(Value) - Method in interface nxopen.annotations.LinearTolerance

Sets the lower tolerance in millimeters(MM)
License requirements: None.

setLowerToleranceType(SearchModelViewBuilder.ValueComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder

License requirements: None.

setLowerToleranceType(SearchModelViewBuilder.ValueComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder

License requirements: None.

setLowerToleranceValue(double) - Method in interface nxopen.annotations.Dimension

Sets a setting to control the lower tolerance value of a dimension.

setLowerToleranceValue(double) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder

License requirements: None.

setLowerToleranceValue(double) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder

License requirements: None.

setLowFrequencyCutoff(double) - Method in interface nxopen.cae.CorrelSolutionBuilder

License requirements: nx_correl_base ("FE Correlation")
.

setLowFrequencyCutoff(double) - Method in interface nxopen.cae.PreTestSolutionBuilder

License requirements: nx_correl_base ("FE Correlation")
.

setLowFrequencyFilteringMode(boolean) - Method in interface nxopen.cae.CorrelSolutionBuilder

License requirements: nx_correl_base ("FE Correlation")
.

setLowFrequencyFilteringMode(boolean) - Method in interface nxopen.cae.PreTestSolutionBuilder

License requirements: nx_correl_base ("FE Correlation")
.

setLowRadius(double) - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setLowThicknessColor(NXColor) - Method in interface nxopen.cae.ThicknessBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setLumbarProminenceL81(String) - Method in interface nxopen.HumanPosturePredictionBuilder

License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setLwrtAngle(double) - Method in interface nxopen.display.EnvironmentBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setLwrtAngle(double) - Method in interface nxopen.display.ImageBasedLighting

License requirements: None.

setLwrtIntensity(double) - Method in interface nxopen.display.EnvironmentBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setLwrtIntensity(double) - Method in interface nxopen.display.ImageBasedLighting

License requirements: None.

setLwrtQuality(double) - Method in interface nxopen.display.EnvironmentBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setLwrtQuality(double) - Method in interface nxopen.display.ImageBasedLighting

License requirements: None.

setLwrtStudioDisplay(boolean) - Method in interface nxopen.preferences.SessionVisualizationShade

Sets the lwrt studio display flag.Alters how studio are displayed.

setMachineAllowance(double) - Method in interface nxopen.tooling.DieDesignLowerBinderBuilder

License requirements: ug_die_design ("Die Design")
.

setMachineAllowance(double) - Method in interface nxopen.tooling.DieDesignTrimPostBuilder

License requirements: ug_die_design ("Die Design")
.

setMachineAxisValue(KinematicAxis, double) - Method in interface nxopen.sim.KinematicModel

Sets the machine axis to the given value.

setMachineBaseJunctionName(String) - Method in interface nxopen.cam.ConvertFromMCDBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setMachineCycleSubroutineName(String) - Method in interface nxopen.cam.TurningOperationBuilder

License requirements: cam_base ("CAM BASE")
.

setMachineName(String) - Method in interface nxopen.sim.MachineToolConfiguration

License requirements: None.

setMachineName(String) - Method in interface nxopen.sim.postconfigurator.CreationPostBuilder

License requirements: nx_post_config_full ("NX Post Configurator") OR nx_post_config_adv ("NX Post Configurator")
.

setMachineOffset(boolean) - Method in interface nxopen.die.DrawBeadBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setMachinePartOccurrence(Component) - Method in interface nxopen.cam.MachineGroupBuilder

License requirements: cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setMachineTechnology(String, MachineToolConfiguration.TechnologyTypes) - Method in interface nxopen.sim.MachineToolConfiguration

Sets the machine technology
License requirements: None.

setMachineToolMainMcs(ToolPathTiltMachine.ToolMainMcsTypes) - Method in interface nxopen.cam.ToolPathTiltMachine

License requirements: None.

setMachineType(ConvertFromMCDBuilder.MachineTypes) - Method in interface nxopen.cam.ConvertFromMCDBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setMachineVendor(String) - Method in interface nxopen.sim.MachineToolConfiguration

License requirements: None.

setMachineZeroCsys(CoordinateSystem) - Method in interface nxopen.cam.ConvertFromMCDBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setMachiningAccessDirection(Direction[], double) - Method in interface nxopen.cam.FeatureRecognitionBuilder

Set the machining access direction to exact or approximate vectors
License requirements: None.

setMachiningAccessDirection(Point, Direction, boolean) - Method in interface nxopen.cam.FeatureRecognitionBuilder

Set the machining access direction to toward or away from an axis defined by a point and a vector
License requirements: None.

setMachiningAccessDirection(Point, boolean) - Method in interface nxopen.cam.FeatureRecognitionBuilder

Set the machining access direction to toward or away from a point
License requirements: None.

setMachiningAccessDirections(Direction[], double) - Method in interface nxopen.cam.GroupFeatures

Set the machining access directions to filter
License requirements: cam_base ("CAM BASE")
.

setMachiningAllowance(double) - Method in interface nxopen.tooling.DieDesDrawDieBuilder

License requirements: ug_die_design ("Die Design")
.

setMachiningAllowance(double) - Method in interface nxopen.tooling.DieDesDrawPunchBuilder

License requirements: ug_die_design ("Die Design")
.

setMachiningArea(String) - Method in interface nxopen.cam.fbm.FeatureGeometry

Change machining area
License requirements: cam_base ("CAM BASE")
.

setMachiningArea(String) - Method in interface nxopen.cam.Operation

Set machining area
License requirements: cam_base ("CAM BASE")
.

setMachiningData(CAMObject[]) - Method in interface nxopen.cam.CAMSetup

Set Machining Data
License requirements: cam_base ("CAM BASE")
.

setMachiningData() - Method in interface nxopen.cam.FeedsBuilder

Set machining data
License requirements: cam_base ("CAM BASE")
.

setMachiningData(Tag) - Method in interface nxopen.uf.UFOper

Refer to UF_OPER_set_machining_data for documentation.

setMachiningText(String) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder

License requirements: None.

setMachiningToleranceType(SearchCriteriaSurfaceFinishBuilder.ToleranceTypeOptions) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder

License requirements: None.

setMachiningType(SearchModelViewBuilder.TextComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder

License requirements: None.

setMacLowerBound(double) - Method in interface nxopen.cae.CorrelModePairingBuilder

License requirements: nx_correl_base ("FE Correlation")
.

setMagazineIndex(int) - Method in interface nxopen.sim.KinematicSinumerikCaBuilder

License requirements: nx_sinumerik_ca ("Sinumerik Collision Avoidance")
.

setMagazineLocationIndex(int) - Method in interface nxopen.sim.KinematicSinumerikCaBuilder

License requirements: nx_sinumerik_ca ("Sinumerik Collision Avoidance")
.

setMagConstant(double) - Method in interface nxopen.motion.VObject

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using Motion.VObject#magnitudeExpression to query or edit it.

setMagFunction(Function) - Method in interface nxopen.motion.VObject

License requirements: mechanisms ("MECHANISMS")
.

setMagicFile(String) - Method in interface nxopen.motion.TirePropertyBasicParameters

License requirements: mechanisms ("MECHANISMS")
.

setMagnification(double) - Method in interface nxopen.display.CameraBuilder

License requirements: None.

setMagnitude(TBSConstraintBuilder.MagnitudeType) - Method in interface nxopen.cae.optimization.TBSConstraintBuilder

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setMainDeck(DirectionOption, IProfile[]) - Method in interface nxopen.die.DeckParentBuilder

Sets the main deck profile of the upper draw die deck.

setMainLifterDriveVector(Direction) - Method in interface nxopen.tooling.DefineLifterBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setMainLifterVector(Direction) - Method in interface nxopen.tooling.DefineLifterBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setMainProfile(DirectionOption, IProfile[]) - Method in interface nxopen.die.SteelInsertBuilder

Sets the main profile of the steel insert
License requirements: ug_die_design ("Die Design")
.

setMainProfileType(MachineReliefBuilder.MainProfileTypes) - Method in interface nxopen.die.MachineReliefBuilder

License requirements: ug_die_design ("Die Design")
.

setMainRunMethod(FormboardLayoutBuilder.MainRunType) - Method in interface nxopen.formboard.FormboardLayoutBuilder

License requirements: routing_harness ("Routing Harness")
.

setMainRunOrigin(Point) - Method in interface nxopen.formboard.FormboardLayoutBuilder

License requirements: routing_harness ("Routing Harness")
.

setMainSpindle(String) - Method in interface nxopen.sim.KinematicChannelBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setMainSpindleFace(Face) - Method in interface nxopen.cam.ConvertFromMCDBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setMainSymbolCustomText(String) - Method in interface nxopen.annotations.PartsListBuilder

License requirements: None.

setMainSymbolText(PartsListBuilder.PartsListMainSymbolText) - Method in interface nxopen.annotations.PartsListBuilder

License requirements: None.

setMaintainAngle(boolean) - Method in interface nxopen.mechanicalrouting.EditPointBuilder

License requirements: routing_base ("Routing Basic")
.

setMaintainBlankStatus(boolean) - Method in interface nxopen.preferences.SessionSketch

Sets the maintain blank status flag.

setMaintainCircularShapeForHolesInFlatSolid(boolean, boolean) - Method in interface nxopen.preferences.PartSheetmetal

Sets the flag indicating whether or not maintain circular shape for holes as part of the Flat Solid creation
License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setMaintainHelixHandedness(boolean) - Method in interface nxopen.features.MirrorBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setMaintainLayerStatus(boolean) - Method in interface nxopen.preferences.SessionSketch

Sets the maintain layer status flag.

setMaintainLength(boolean) - Method in interface nxopen.mechanicalrouting.EditPointBuilder

License requirements: routing_base ("Routing Basic")
.

setMaintainLength(boolean) - Method in interface nxopen.mechanicalrouting.MovePathBuilder

License requirements: routing_base ("Routing Basic")
.

setMaintainRelationships(boolean) - Method in interface nxopen.assemblies.ReplaceComponentBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setMaintainStockFlag(boolean) - Method in interface nxopen.routing.OffsetPath

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setMaintainThreadHandedness(boolean) - Method in interface nxopen.features.MirrorBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setMaintainTilt(boolean) - Method in interface nxopen.cam.ToolPathTiltAvoidance

License requirements: None.

setMaintainTilt(boolean) - Method in interface nxopen.cam.ToolPathTiltBuilder

Deprecated.

Deprecated in NX9.0.0. Use ToolPathTiltAvoidance.maintainTilt() instead.

setMaintainZeroBendRadius(boolean) - Method in interface nxopen.features.sheetmetal.ConvertToSheetmetalBuilder

Sets the option for Maintain zero bend radius.

setMainType(MeshControlBuilder.Types) - Method in interface nxopen.cae.MeshControlBuilder

Sets the type of mesh control
License requirements: nx_masterfem ("Finite Element Modeling")
.

setMainWallCenterline(DirectionOption, IProfile[]) - Method in interface nxopen.die.DeckParentBuilder

Sets the main wall centerline profile of the draw die punch.

setMajorDiameter(double) - Method in interface nxopen.cam.HoleBossSet

License requirements: cam_base ("CAM BASE")
.

setMajorLineSpacing(double) - Method in interface nxopen.display.GridBuilder

License requirements: None.

setMajorLineStyle(GridBuilder.LineStyleType) - Method in interface nxopen.display.GridBuilder

License requirements: None.

setMajorLineWeight(GridBuilder.LineWeightType) - Method in interface nxopen.display.GridBuilder

License requirements: None.

setMajorPoint(Point) - Method in interface nxopen.SketchEllipseBuilder

License requirements: None.

setMajorRadius(double) - Method in interface nxopen.cam.InspectionTorusFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setMakeActive(boolean) - Method in interface nxopen.assemblies.PositioningGroupBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setMakeCurrentOnError(boolean) - Method in interface nxopen.preferences.SessionModeling

Sets the option "Make Current on Error" gives choice, whether the user wants to make error feature current when features contain errors during feature update/playback.

setMakeDatumsInternal(boolean) - Method in interface nxopen.preferences.SessionModeling

License requirements: None.

setMakeDisplayedPart(boolean) - Method in interface nxopen.FileNew

License requirements: None.

setMakeOriginAssociative(boolean) - Method in interface nxopen.SketchInPlaceBuilder

Deprecated.

Deprecated in NX11.0.0. None

setMakePositionIndependent(boolean) - Method in interface nxopen.features.CompositeCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setMakePositionIndependent(boolean) - Method in interface nxopen.features.ExtractFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setMakePositionIndependent(boolean) - Method in interface nxopen.features.MirrorBodyBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setMakePositionIndependent(boolean) - Method in interface nxopen.features.WaveDatumBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setMakePositionIndependent(boolean) - Method in interface nxopen.features.WaveInterfaceLinkerBuilder

License requirements: None.

setMakePositionIndependent(boolean) - Method in interface nxopen.features.WaveLinkBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setMakePositionIndependent(boolean) - Method in interface nxopen.features.WavePointBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setMakePositionIndependent(boolean) - Method in interface nxopen.features.WaveRoutingBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setMakePositionIndependent(boolean) - Method in interface nxopen.features.WaveSketchBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setMakeReference(boolean) - Method in interface nxopen.SketchConstraintBuilder

License requirements: None.

setMakeSketchesInternal(boolean) - Method in interface nxopen.preferences.SessionModeling

License requirements: None.

setMakeSketchInternal(boolean) - Method in interface nxopen.linedesigner.FloorEquipmentBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setMakeSketchInternal(boolean) - Method in interface nxopen.linedesigner.HoleFeatureBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setMakeUniqueName(String) - Method in interface nxopen.BasePart

Sets the unique name on part for the Make Unique operation
License requirements: assemblies ("ASSEMBLIES MODULE")
.

setMakeWorkPart(boolean) - Method in interface nxopen.assemblies.CreateOverridePartBuilder

License requirements: None.

setMaleBeadPosition(DrawBeadBuilder.MaleBeadPositionTypes) - Method in interface nxopen.die.DrawBeadBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setMaleBeadWidthType(DrawBeadSegmentBuilder.MaleBeadWidthTypes) - Method in interface nxopen.die.DrawBeadSegmentBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setManagedModeComponentLoadMethod(LoadOptions.ManagedModeLoadMethod) - Method in interface nxopen.LoadOptions

Sets the option indicating what method to use to determine how to configure assembly structure in managed mode
License requirements: None.

setManagedResultFile(String) - Method in interface nxopen.cae.SimResultReference

Specify managed result file
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setManagedResultFile(String) - Method in interface nxopen.cae.SimSolution

Deprecated.

Deprecated in NX10.0.0. Use SimResultReference :SimSolution.setManagedResultFile(java.lang.String) instead.

SetManager - Interface in nxopen.cae

Represents a group of CAE object sets.

SetManager.TargetSetMembersData - Class in nxopen.cae

This class holds the data returned from SetManager.getTargetSetMembers(int)

SetManager.TargetSetPlaneData - Class in nxopen.cae

This class holds the data returned from SetManager.getTargetSetPlane(int)

setManageTemporaryObjectsType(QuickQuotationBuilder.ManageTemporaryObjectsTypes) - Method in interface nxopen.tooling.QuickQuotationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setManipulatorMatrix(Matrix3x3) - Method in interface nxopen.FlatteningBuilder

Deprecated.

Deprecated in NX11.0.0. Use FlatteningAndFormingBuilder instead.

setManipulatorMatrix(Matrix3x3) - Method in interface nxopen.geometricutilities.ModlMotion

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setManipulatorOrientation(Matrix3x3) - Method in interface nxopen.tooling.StockSizeBuilder

Set the orientation of the current bounded box.

setManipulatorOrigin(Point3d) - Method in interface nxopen.FlatteningBuilder

Deprecated.

Deprecated in NX11.0.0. Use FlatteningAndFormingBuilder instead.

setManipulatorOrigin(Point3d) - Method in interface nxopen.geometricutilities.ModlMotion

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setManipulatorOriginValue(Point3d) - Method in interface nxopen.tooling.ChannelAdjustBuilder

Sets the manipulator origin.

setManipulatorPosition(Matrix3x3, Point3d) - Method in interface nxopen.tooling.MoldFillingBuilder

Sets manipulator position.

setManipulatorToMatrixAndPosition(Matrix3x3, Point3d) - Method in interface nxopen.tooling.DieInsertBuilder

Sets box csys matrix.

setManual(boolean) - Method in interface nxopen.visualreporting.GroupLabel

License requirements: nx_visual_reporting ("Visual Reporting")
.

setManualBody(Body) - Method in interface nxopen.tooling.TrimSolidBuilder

Sets the manually selected target body.

setManualDegree(int) - Method in interface nxopen.geometricutilities.Rebuild

Sets the degree when rebuild type is manual.

setManualGroupingForRule(Rule, boolean) - Method in interface nxopen.visualreporting.VisualReportBuilder

Sets whether the Classifier.GroupingMethodOption of the active Classifier in this Rule is Classifier.GroupingMethodOption.MANUAL .

setManualPoint(boolean) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setManualTiltingType(ToolPathTiltTilting.ManualTiltTypes) - Method in interface nxopen.cam.ToolPathTiltTilting

License requirements: None.

setManualToggle(boolean) - Method in interface nxopen.cam.InspectionCmmCommandBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setManualToolChange(boolean) - Method in interface nxopen.cam.ToolChangeCiBuilder

License requirements: cam_base ("CAM BASE")
.

setManufacturerName(String) - Method in interface nxopen.sim.postconfigurator.CreationPostBuilder

License requirements: nx_post_config_full ("NX Post Configurator") OR nx_post_config_adv ("NX Post Configurator")
.

setManufacturingDesignMode(SetModeBuilder.DesMfgMode) - Method in interface nxopen.features.shipdesign.SetModeBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setManufacturingType(TBSShapeLinkCondition.ManufacturingOption) - Method in interface nxopen.cae.optimization.TBSShapeLinkCondition

License requirements: cae_opt_toposhape ("NX Shape Optimization")
.

setManyLayersStatus(int, UFLayer.StatusInfo) - Method in interface nxopen.uf.UFLayer

Refer to UF_LAYER_set_many_layers_status for documentation.

setMapCenter(double) - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setMapCrossHatchTo(IgesCreator.CrossHatchMapEnum) - Method in interface nxopen.IgesCreator

License requirements: None.

setMapData(TaggedObject) - Method in interface nxopen.cae.ManualMorphBuilder

Sets the new manual map object tag to map tag array
License requirements: nx_masterfem ("Finite Element Modeling")
.

setMapDirection(TaggedObject, double[]) - Method in interface nxopen.cae.ManualMorphBuilder

Sets the direction along which nodes will be mapped on to selected geometry
License requirements: nx_masterfem ("Finite Element Modeling")
.

setMapDirectionMethod(TaggedObject, int) - Method in interface nxopen.cae.ManualMorphBuilder

Sets the vector creation method used to define direction of manual map
License requirements: nx_masterfem ("Finite Element Modeling")
.

setMapDirectionPoint(TaggedObject, double[]) - Method in interface nxopen.cae.ManualMorphBuilder

Sets the start point of vector chosen to define direction of manual map
License requirements: nx_masterfem ("Finite Element Modeling")
.

setMapFaceColor(boolean) - Method in interface nxopen.tooling.ElectrodeCheckingBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setMapFaceEdges(boolean) - Method in interface nxopen.features.shipdesign.ShellExpansionBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setMapFeatures(boolean) - Method in interface nxopen.cam.FeatureRecognitionBuilder

License requirements: None.

setMaplenames(String[]) - Method in interface nxopen.features.MapleBuilder

Set the maple names corresponding to expressions in the Maple Builder
License requirements: solid_modeling ("SOLIDS MODELING")
.

setMapMethod(TaggedObject, ManualMorphBuilder.MapMethod) - Method in interface nxopen.cae.ManualMorphBuilder

Sets the method chosen to apply node mapping on selected geometry
License requirements: nx_masterfem ("Finite Element Modeling")
.

setMapName(TaggedObject, String) - Method in interface nxopen.cae.ManualMorphBuilder

Sets the name of manual mapping
License requirements: nx_masterfem ("Finite Element Modeling")
.

setMappedComponentRemovalOption(AssyFEModel.MappedComponentRemovalType) - Method in interface nxopen.cae.AssyFEModel

Sets unmap update option
License requirements: nx_masterfem ("Finite Element Modeling")
.

setMappedEntities(DisplayableObject[], DisplayableObject[]) - Method in interface nxopen.geometricutilities.ParentEquivalencyMap

Set externally mapped entities
License requirements: solid_modeling ("SOLIDS MODELING")
.

setMappedHoleSize(int) - Method in interface nxopen.cae.MeshControlDisplayOptionsBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setMappedNumberOfLayers(int) - Method in interface nxopen.cae.MeshControlBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setMappingMethod(ReplaceFeatureBuilder.MappingMethodType) - Method in interface nxopen.features.ReplaceFeatureBuilder

License requirements: None.

setMappingTolerance(double) - Method in interface nxopen.features.ReplaceFeatureBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setMappingToleranceIncreased(boolean) - Method in interface nxopen.features.ReplaceFeatureBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setMapRange(double) - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setMapRevolvedFacesTo(IgesCreator.MapRevolvedFacesOption) - Method in interface nxopen.IgesCreator

License requirements: None.

setMapSequence(boolean) - Method in interface nxopen.cae.ManualMorphBuilder

License requirements: None.

setMapStatus(ParentEquivalencyMap.Status) - Method in interface nxopen.geometricutilities.ParentEquivalencyMap

License requirements: solid_modeling ("SOLIDS MODELING")
.

setMapSubtype(SpatialMap.SubtypeEnum) - Method in interface nxopen.fields.SpatialMapBuilder

License requirements: None.

setMapSubtypeMapping(SpatialMap.SubtypeMappingEnum) - Method in interface nxopen.fields.SpatialMapBuilder

License requirements: None.

setMapTabCylToBSurf(boolean) - Method in interface nxopen.IgesCreator

License requirements: None.

setMapTransverseFrames(boolean) - Method in interface nxopen.features.shipdesign.ShellExpansionBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setMapType(TaggedObject, ManualMorphBuilder.MapType) - Method in interface nxopen.cae.ManualMorphBuilder

Sets the manual map type - Stationary, Node-to-Edge, Node-to-Face
License requirements: nx_masterfem ("Finite Element Modeling")
.

setMapType(SpatialMap.TypeEnum) - Method in interface nxopen.fields.SpatialMapBuilder

License requirements: None.

setMapType(ParentEquivalencyMap.Type) - Method in interface nxopen.geometricutilities.ParentEquivalencyMap

License requirements: None.

setMapViewDep(boolean) - Method in interface nxopen.IgesImporter

License requirements: None.

setMargin(int) - Method in interface nxopen.tooling.CompDrawingBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setMarginBetweenViews(double) - Method in interface nxopen.drawings.StandardViewsBuilder

License requirements: nx_layout ("NX Layout")
.

setMarginBetweenViews(double) - Method in interface nxopen.drawings.ViewCreationWizardBuilder

License requirements: drafting ("DRAFTING")
.

setMarginFirstOffset(double) - Method in interface nxopen.annotations.OrdinateStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setMarginForView(double) - Method in interface nxopen.tooling.CompDrawingBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setMarginOfSafety(boolean) - Method in interface nxopen.cae.DurabilityEventStrengthSettingsBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setMarginPercent(NXObject, double) - Method in interface nxopen.annotations.HatchBuilder

Set margin percent to a annotation
License requirements: drafting ("DRAFTING")
.

setMarginSafety(boolean) - Method in interface nxopen.cae.DurabilityResultsReportBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setMarginSpacing(double) - Method in interface nxopen.annotations.OrdinateDimensionPreferences

Sets the spacing, the distance between margins
License requirements: None.

setMarginSpacing(double) - Method in interface nxopen.annotations.OrdinateStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setMarginToBorder(double) - Method in interface nxopen.drawings.StandardViewsBuilder

License requirements: nx_layout ("NX Layout")
.

setMarginToBorder(double) - Method in interface nxopen.drawings.ViewCreationWizardBuilder

License requirements: drafting ("DRAFTING")
.

setMark(UFUndo.UserVisibility, String) - Method in interface nxopen.uf.UFUndo

Refer to UF_UNDO_set_mark for documentation.

setMarker(NXObject) - Method in interface nxopen.motion.MarkerToNodeData

License requirements: mechanisms ("MECHANISMS")
.

setMarker(Tag, UFMotion.Marker) - Method in interface nxopen.uf.UFMotion

Refer to UF_MOTION_set_marker for documentation.

setMarkerDisplayed(boolean) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setMarkerItems(MarkerToNodeData[]) - Method in interface nxopen.motion.FlexBodyBuilder

Sets marker to node list Items
License requirements: mechanisms ("MECHANISMS")
.

setMarkerPosition(int) - Method in interface nxopen.motion.MarkerToNodeData

License requirements: mechanisms ("MECHANISMS")
.

setMarkingHeight(double) - Method in interface nxopen.drawings.BordersAndZonesBuilder

Deprecated.

Deprecated in NX10.0.0. Use SheetZoneSettingsBuilder.markingHeight() instead.

setMarkingHeight(double) - Method in interface nxopen.drawings.SheetZoneSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setMarkingLinesDirectionType(ShellTemplateBuilder.MarkingTypes) - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setMarkVisibility(int, String, UFUndo.UserVisibility) - Method in interface nxopen.uf.UFUndo

Refer to UF_UNDO_set_mark_visibility for documentation.

setMassCenter(Point) - Method in interface nxopen.motion.LinkMassProperty

License requirements: mechanisms ("MECHANISMS")
.

setMassCenterPoint(Point) - Method in interface nxopen.mechatronics.RigidBodyBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setMassLimit(double) - Method in interface nxopen.die.SteelInsertSectionBuilder

Sets the mass limit of the steel insert casting
License requirements: ug_die_design ("Die Design")
.

setMassMatrix0(boolean) - Method in interface nxopen.motion.FlexBodyBuilder

License requirements: mechanisms ("MECHANISMS")
.

setMassMatrix1(boolean) - Method in interface nxopen.motion.FlexBodyBuilder

License requirements: mechanisms ("MECHANISMS")
.

setMassMatrix2(boolean) - Method in interface nxopen.motion.FlexBodyBuilder

License requirements: mechanisms ("MECHANISMS")
.

setMassMatrix3(boolean) - Method in interface nxopen.motion.FlexBodyBuilder

License requirements: mechanisms ("MECHANISMS")
.

setMassMatrix4(boolean) - Method in interface nxopen.motion.FlexBodyBuilder

License requirements: mechanisms ("MECHANISMS")
.

setMassProperty(RigidBodyBuilder.MassPropertiesOption) - Method in interface nxopen.mechatronics.RigidBodyBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setMassPropertyType(SectionInertiaAnalysisBuilder.PropertyType) - Method in interface nxopen.features.SectionInertiaAnalysisBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setMassScalar0(boolean) - Method in interface nxopen.motion.FlexBodyBuilder

License requirements: mechanisms ("MECHANISMS")
.

setMassScalar1(boolean) - Method in interface nxopen.motion.FlexBodyBuilder

License requirements: mechanisms ("MECHANISMS")
.

setMassScalar2(boolean) - Method in interface nxopen.motion.FlexBodyBuilder

License requirements: mechanisms ("MECHANISMS")
.

setMassState(LumpedMassEADBuilder.State) - Method in interface nxopen.cae.LumpedMassEADBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setMassType(LinkMassProperty.MassPropertyType) - Method in interface nxopen.motion.LinkMassProperty

License requirements: mechanisms ("MECHANISMS")
.

setMassValue(double) - Method in interface nxopen.motion.LinkMassProperty

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using LinkMassProperty.massExpression() to query or edit it.

setMassVector0(boolean) - Method in interface nxopen.motion.FlexBodyBuilder

License requirements: mechanisms ("MECHANISMS")
.

setMassVector1(boolean) - Method in interface nxopen.motion.FlexBodyBuilder

License requirements: mechanisms ("MECHANISMS")
.

setMassVector2(boolean) - Method in interface nxopen.motion.FlexBodyBuilder

License requirements: mechanisms ("MECHANISMS")
.

setMassVector3(boolean) - Method in interface nxopen.motion.FlexBodyBuilder

License requirements: mechanisms ("MECHANISMS")
.

setMassVector4(boolean) - Method in interface nxopen.motion.FlexBodyBuilder

License requirements: mechanisms ("MECHANISMS")
.

setMaster(boolean) - Method in interface nxopen.routing.OffsetPath

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setMasterAxisJoint(PhysicsJoint) - Method in interface nxopen.mechatronics.CouplingBuilder

Sets the master axis.

setMasterAxisType(CamBuilder.AxisJointType) - Method in interface nxopen.mechatronics.CamBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setMasterAxisType(GraphControlBuilder.MasterJointType) - Method in interface nxopen.mechatronics.GraphControlBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setMasterBaseType(GraphControlBuilder.MasterType) - Method in interface nxopen.mechatronics.GraphControlBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setMasterExpressionValues(Expression[]) - Method in interface nxopen.geometricutilities.SecondarySectionData

Set the Master Sketch Expression Values.

setMasterFileName(String) - Method in interface nxopen.FileNew

License requirements: None.

setMasterModelCncPartName(String) - Method in interface nxopen.tooling.EWDraftingBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setMasterModelEdmPartName(String) - Method in interface nxopen.tooling.EWDraftingBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setMasterModelPartName(String) - Method in interface nxopen.tooling.EjectorTableBuilder

License requirements: ug_mold_design ("UG MOLD")
.

setMasterMultiple(double) - Method in interface nxopen.mechatronics.GearBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setMasterOpLabel(String) - Method in interface nxopen.cam.InspectionSensorBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setMasterPart(BasePart) - Method in interface nxopen.pdm.PartOperationCreateBuilder

Sets the Master Part Use this only in case the part your are trying to create supports master model.

setMasterPath(IPath) - Method in interface nxopen.routing.OffsetPath

The master path object for this offset object.

setMasterSymbolFilePaths(String[]) - Method in interface nxopen.drawings.AddObjectsToRegionBuilder

Set the master symbol paths
License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setMasterSymbolName(String) - Method in interface nxopen.annotations.BaseCustomSymbolBuilder

License requirements: drafting ("DRAFTING")
.

setMasterSymbolNameInQaf() - Method in interface nxopen.annotations.AnnotationManager

This method writes master custom symbol name to the predefined quick access folder and saves the part.

setMasterSymbolPath(String) - Method in interface nxopen.annotations.BaseCustomSymbolBuilder

License requirements: drafting ("DRAFTING")
.

setMasterType(PreferencesBuilder.MasterTypes) - Method in interface nxopen.mechatronics.PreferencesBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setMasterUnit(CamProfileBuilder.MasterValueUnit) - Method in interface nxopen.mechatronics.CamProfileBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setMasterUnit(GraphControlBuilder.MasterValueUnit) - Method in interface nxopen.mechatronics.GraphControlBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setMasterUnit(MotionProfileBuilder.MasterValueUnit) - Method in interface nxopen.mechatronics.MotionProfileBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setMatchCut(DieEngTrimTaskBuilder.TrimTaskMatchCutType) - Method in interface nxopen.tooling.DieEngTrimTaskBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setMatchCutAngle(double) - Method in interface nxopen.tooling.DieEngTrimTaskBuilder

Sets the match cut dimension angle value.

setMatchCutExtensionAngle(double) - Method in interface nxopen.die.TrimTaskBuilder

Sets the match cut extension angle dimension of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.

setMatchCutFirstRadius(double) - Method in interface nxopen.die.TrimTaskBuilder

Sets the match cut first radius dimension of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.

setMatchCutFirstRadius(double) - Method in interface nxopen.tooling.DieEngTrimTaskBuilder

Sets the match cut dimension first radius value.

setMatchCutNotchOffset(double) - Method in interface nxopen.die.TrimTaskBuilder

Sets the match cut notch offset dimension of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.

setMatchCutNotchOffset(double) - Method in interface nxopen.tooling.DieEngTrimTaskBuilder

Sets the match cut dimension notch offset value.

setMatchCutOffsetFromPlane(double) - Method in interface nxopen.die.TrimTaskBuilder

Sets the match cut offset from plane dimension of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.

setMatchCutOffsetFromPlane(double) - Method in interface nxopen.tooling.DieEngTrimTaskBuilder

Sets the match cut dimension offset from plane value.

setMatchCutOffsetLength(double) - Method in interface nxopen.die.TrimTaskBuilder

Sets the match cut offset length dimension of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.

setMatchCutOffsetLength(double) - Method in interface nxopen.tooling.DieEngTrimTaskBuilder

Sets the match cut dimension offset length value.

setMatchCutScrapCutterLength(double) - Method in interface nxopen.die.TrimTaskBuilder

Sets the match cut scrap cutter length dimension of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.

setMatchCutScrapCutterLength(double) - Method in interface nxopen.tooling.DieEngTrimTaskBuilder

Sets the match cut dimension scrap cutter length value.

setMatchCutSecondRadius(double) - Method in interface nxopen.die.TrimTaskBuilder

Sets the match cut second radius dimension of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.

setMatchCutSecondRadius(double) - Method in interface nxopen.tooling.DieEngTrimTaskBuilder

Sets the match cut dimension second radius value.

setMatchCutThirdRadius(double) - Method in interface nxopen.die.TrimTaskBuilder

Sets the match cut third radius dimension of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.

setMatchCutThirdRadius(double) - Method in interface nxopen.tooling.DieEngTrimTaskBuilder

Sets the match cut dimension third radius value.

setMatchCutType(TrimTaskBuilder.MatchCutTypes) - Method in interface nxopen.die.TrimTaskBuilder

Sets the match cut type of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.

setMatchDimOfStartHole(boolean) - Method in interface nxopen.geometricutilities.EndHoleData

License requirements: solid_modeling ("SOLIDS MODELING")
.

setMatchDimOfStartHole(boolean) - Method in interface nxopen.geometricutilities.MiddleHoleData

License requirements: solid_modeling ("SOLIDS MODELING")
.

setMatchedEntity(NXObject) - Method in interface nxopen.features.MatchedReferenceBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setMatchedReference(NXObject, NXObject, boolean) - Method in interface nxopen.userdefinedtemplate.InstantiationBuilder

Set the matched reference of an original reference in User Defined Template
License requirements: usr_defined_features ("USER DEFINED FEATURES")
.

setMatchedStatus(MatchedReferenceBuilder.ResolvedStatus) - Method in interface nxopen.features.MatchedReferenceBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setMatchEndToEnd(boolean) - Method in interface nxopen.features.MatchEdgeBuilder

License requirements: features_modeling ("FEATURES MODELING")
.

setMatchExact(boolean) - Method in interface nxopen.geometricutilities.MatchSurfaceBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING")
.

setMatchExactType(MatchEdgeBuilder.MatchExact) - Method in interface nxopen.features.MatchEdgeBuilder

License requirements: features_modeling ("FEATURES MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setMatchFaceOption(FlangeBuilder.MatchFaceOptions) - Method in interface nxopen.features.sheetmetal.FlangeBuilder

Sets the match face selection type.

setMatchingForIndex(int, NXObject) - Method in interface nxopen.features.ReplaceFeatureBuilder

Set the matching reference using the index into the feature references
License requirements: solid_modeling ("SOLIDS MODELING")
.

setMatchingForParent(NXObject, NXObject) - Method in interface nxopen.features.ReplaceFeatureBuilder

Set the matching reference using the parent to match in the feature references
License requirements: solid_modeling ("SOLIDS MODELING")
.

setMatchingOption(DraftBodyBuilder.MatchOption) - Method in interface nxopen.features.DraftBodyBuilder

Deprecated.

Deprecated in NX9.0.0. Use DraftBodyBuilder.setMatchScope(nxopen.features.DraftBodyBuilder.MatchingScope) instead

setMatchKnots(StudioSplineBuilder.MatchKnotsType) - Method in interface nxopen.features.StudioSplineBuilder

Deprecated.

Deprecated in NX8.0.0. Use StudioSplineBuilderEx instead.

setMatchKnotsType(StudioSplineBuilderEx.MatchKnotsTypes) - Method in interface nxopen.features.StudioSplineBuilderEx

License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setMatchPlane(Plane) - Method in interface nxopen.features.sheetmetal.FlangeBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setMatchPointOne(Point) - Method in interface nxopen.bodydes.OnestepUnformBuilder

License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setMatchPointThree(Point) - Method in interface nxopen.bodydes.OnestepUnformBuilder

License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setMatchPointTwo(Point) - Method in interface nxopen.bodydes.OnestepUnformBuilder

License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setMatchScope(DraftBodyBuilder.MatchingScope) - Method in interface nxopen.features.DraftBodyBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setMatchSheetBoundariesOnly(boolean) - Method in interface nxopen.geometricutilities.ReplAsstBuilder

License requirements: None.

setMatchType(DraftBodyBuilder.MatchingType) - Method in interface nxopen.features.DraftBodyBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setMateCsys(NXObject) - Method in interface nxopen.tooling.ElectrodeComponentBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setMaterial(AreaFillMaterial) - Method in interface nxopen.annotations.HatchBuilder

Deprecated.

Deprecated in NX7.5.0. Use HatchFillSettingsBuilder instead.

setMaterial(AreaFillMaterial) - Method in interface nxopen.annotations.HatchFillSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setMaterial(PhysicalMaterial) - Method in interface nxopen.cae.connections.IConnectionMod

Use this function to set the connection material.

setMaterial(PhysicalMaterial) - Method in interface nxopen.cae.MaterialOptions

Sets
License requirements: None.

setMaterial(String) - Method in interface nxopen.cam.FeatureGeomBuilder

Set part material
License requirements: cam_base ("CAM BASE")
.

setMaterial(String) - Method in interface nxopen.cam.ToolBuilder

Set tool material
License requirements: cam_base ("CAM BASE")
.

setMaterial(SteelDistributionBuilder.SaMaterial) - Method in interface nxopen.features.shipdesign.SteelDistributionBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setMaterial(CollisionMaterial) - Method in interface nxopen.mechatronics.TransportSurfaceBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setMaterial(boolean, String) - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign

Sets the material standard
License requirements: nx_flexible_pcb ("NX Flexible PCB")
.

setMaterial(boolean, String) - Method in interface nxopen.preferences.PartSheetmetal

The material standard
License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setMaterial(ElectrodeBlankBuilder.BlankMaterial) - Method in interface nxopen.tooling.ElectrodeBlankBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setMaterial(InitProjectBuilder.MaterialId) - Method in interface nxopen.tooling.InitProjectBuilder

License requirements: None.

setMaterial(Tag, String) - Method in interface nxopen.uf.UFCam

Refer to UF_CAM_set_material for documentation.

setMaterialByName(String) - Method in interface nxopen.cae.LaminatePly

Sets the material by name.

setMaterialCategory(String) - Method in interface nxopen.PhysicalMaterial

Sets the material category using international character set
License requirements: None.

setMaterialCondition(DatumReferenceBuilder.DatumReferenceMaterialCondition) - Method in interface nxopen.annotations.DatumReferenceBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setMaterialConditionModifiers(MaterialConditionModifier[]) - Method in interface nxopen.annotations.DatumReference

Sets the material condition modifiers
License requirements: None.

setMaterialConditionModifiers(MaterialConditionModifier[]) - Method in interface nxopen.annotations.FcfFrame

Deprecated.

Deprecated in NX10.0.0. Use FeatureControlFrameDataBuilder.materialModifier() and FeatureControlFrameDataBuilder.setMaterialModifier(nxopen.annotations.FeatureControlFrameDataBuilder.ToleranceMaterialModifier) instead.

setMaterialDamping(double) - Method in interface nxopen.motion.BodyContactAdams

Deprecated.

Deprecated in NX8.0.0. Obtion the exression using BodyContactAdams.materialDampingExpression() to query or edit it.

setMaterialDamping(double) - Method in interface nxopen.motion.BodyContactRecurdyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using BodyContactRecurdyn.materialDampingExpression() to query or edit it.

setMaterialDamping(double) - Method in interface nxopen.motion.CurveContactAdams

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using CurveContactAdams.materialDampingExpression() to query or edit it.

setMaterialDamping(double) - Method in interface nxopen.motion.CurveContactRecurdyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using CurveContactRecurdyn.materialDampingExpression() to query or edit it.

setMaterialDefinitionType(StrengthStressMaterialDefinitionMethod) - Method in interface nxopen.cae.responsesimulation.StrengthResultsEvaluationSettingBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setMaterialEditable(boolean) - Method in interface nxopen.PhysicalMaterial

Sets whether a material can be modified or not.

setMaterialGradeName(String) - Method in interface nxopen.features.shipdesign.PlateStockBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setMaterialGradeOption(int) - Method in interface nxopen.features.shipdesign.PlateStockBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setMaterialInherited(boolean) - Method in interface nxopen.cae.MaterialOptions

Sets
License requirements: None.

setMaterialInterpolationOption(TBSTopologySensitivityOptimizationParameters.MaterialInterpolation) - Method in interface nxopen.cae.optimization.TBSTopologySensitivityOptimizationParameters

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setMaterialLibrary(String) - Method in interface nxopen.PhysicalMaterialBuilder

License requirements: None.

setMaterialMergeOption(SolverAppendOption.MergeOption) - Method in interface nxopen.cae.SolverAppendOption

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setMaterialModifier(FeatureControlFrameDataBuilder.ToleranceMaterialModifier) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setMaterialName(String) - Method in interface nxopen.display.CgfxMattexBuilder

Deprecated.

Deprecated in NX10.0.0. No alternative provided for this class.

setMaterialName(String) - Method in interface nxopen.display.IrayPlusMaterialEditorBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setMaterialName(String) - Method in interface nxopen.features.shipdesign.PlateStockBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setMaterialName(String) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setMaterialOption(int) - Method in interface nxopen.features.shipdesign.PlateStockBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setMaterialOrientationState(ShellEADBuilder.State) - Method in interface nxopen.cae.ShellEADBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setMaterialOutsideLoop(boolean) - Method in interface nxopen.features.MasterCutBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setMaterialOverrideOption(boolean) - Method in interface nxopen.cae.responsesimulation.StrengthResultsEvaluationSettingBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setMaterialProperties(String[]) - Method in interface nxopen.annotations.MaterialSpecificationBuilder

Sets the material properties
License requirements: None.

setMaterialPropertyDensity(double) - Method in interface nxopen.bodydes.OnestepUnformBuilder

License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setMaterialPropertyDensity(double) - Method in interface nxopen.die.TrimLineDevelopmentBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setMaterialPropertyE(double) - Method in interface nxopen.bodydes.OnestepUnformBuilder

License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setMaterialPropertyE(double) - Method in interface nxopen.die.TrimLineDevelopmentBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setMaterialPropertyF(double) - Method in interface nxopen.bodydes.OnestepUnformBuilder

License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setMaterialPropertyF(double) - Method in interface nxopen.die.TrimLineDevelopmentBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setMaterialPropertyInitialStrain(double) - Method in interface nxopen.bodydes.OnestepUnformBuilder

License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setMaterialPropertyInitialStrain(double) - Method in interface nxopen.die.TrimLineDevelopmentBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setMaterialPropertyK(double) - Method in interface nxopen.bodydes.OnestepUnformBuilder

License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setMaterialPropertyK(double) - Method in interface nxopen.die.TrimLineDevelopmentBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setMaterialPropertyN(double) - Method in interface nxopen.bodydes.OnestepUnformBuilder

License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setMaterialPropertyN(double) - Method in interface nxopen.die.TrimLineDevelopmentBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setMaterialPropertyPoisson(double) - Method in interface nxopen.bodydes.OnestepUnformBuilder

License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setMaterialPropertyPoisson(double) - Method in interface nxopen.die.TrimLineDevelopmentBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setMaterialPropertyR0(double) - Method in interface nxopen.bodydes.OnestepUnformBuilder

License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setMaterialPropertyR0(double) - Method in interface nxopen.die.TrimLineDevelopmentBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setMaterialPropertyR45(double) - Method in interface nxopen.bodydes.OnestepUnformBuilder

License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setMaterialPropertyR45(double) - Method in interface nxopen.die.TrimLineDevelopmentBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setMaterialPropertyR90(double) - Method in interface nxopen.bodydes.OnestepUnformBuilder

License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setMaterialPropertyR90(double) - Method in interface nxopen.die.TrimLineDevelopmentBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setMaterialPropertyValue(String, boolean, PhysicalMaterial) - Method in interface nxopen.BasePropertyTable

Sets the material value
License requirements: None.

setMaterialPropertyYieldStress(double) - Method in interface nxopen.bodydes.OnestepUnformBuilder

License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setMaterialPropertyYieldStress(double) - Method in interface nxopen.die.TrimLineDevelopmentBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setMaterials(PhysicalMaterial[]) - Method in interface nxopen.cae.ImportSimulationBuilder

Set materials to import
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setMaterials(DirectUnfoldBuilder.MatType) - Method in interface nxopen.tooling.DirectUnfoldBuilder

Deprecated.

Deprecated in NX10.0.0. Use Tooling.DefineNeutralFactorBuilder#setPartMaterial instead.

setMaterialSafetyFactor(double) - Method in interface nxopen.cae.responsesimulation.StrengthResultsEvaluationSettingBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setMaterialSide(GeometrySet.MaterialSideTypes) - Method in interface nxopen.cam.GeometrySet

License requirements: cam_base ("CAM BASE")
.

setMaterialSide(TabBuilder.SectionSideOptions) - Method in interface nxopen.features.sheetmetal.TabBuilder

Sets the material side value of secondary tab
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setMaterialTag(PhysicalMaterial) - Method in interface nxopen.cae.DurabilityDamageEvaluationBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setMaterialTag(PhysicalMaterial) - Method in interface nxopen.cae.DurabilityEventOverridesBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setMaterialTag(PhysicalMaterial) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setMaterialType(String) - Method in interface nxopen.annotations.MaterialSpecificationBuilder

License requirements: None.

setMaterialType(TrimLineDevelopmentBuilder.MaterialTypeName) - Method in interface nxopen.die.TrimLineDevelopmentBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setMaterialType(AeroFlangeBuilder.MatType) - Method in interface nxopen.features.sheetmetal.AeroFlangeBuilder

Set the material type of the flange
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setMaterialType(int) - Method in interface nxopen.features.shipdesign.SteelInsulationBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setMaterialTypeOption(LsdynaGeometryPreparationBuilder.MaterialType) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setMaterialTypes(ModelUpdateDesignVariablesRapidCreateBuilder.MaterialTypesEnum) - Method in interface nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder

License requirements: nx_correl_update ("FE Model Update")
.

setMaterialUtil(String) - Method in interface nxopen.tooling.QuickQuotationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setMaterialUtilization(String) - Method in interface nxopen.tooling.BlankLayoutBuilder

License requirements: None.

setMateSetting(ObjectBuilder.Mate) - Method in interface nxopen.assemblies.productinterface.ObjectBuilder

License requirements: None.

setMathPlotData(int, double, double) - Method in interface nxopen.cae.FunctionBuilder

Sets plot data setting for a math function.

setMatlabFileBrowser(String) - Method in interface nxopen.mechatronics.MATLABClientBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setMATLABServerProgID(String) - Method in interface nxopen.mechatronics.MATLABClientBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setMATLABSignalName(String) - Method in interface nxopen.mechatronics.MATLABSignalConnectionBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setMATLABSignalPort(MATLABClientBuilder.DataPortType) - Method in interface nxopen.mechatronics.MATLABSignalConnectionBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setMATLABSignalType(MATLABSignalConnectionBuilder.DataType) - Method in interface nxopen.mechatronics.MATLABSignalConnectionBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setMatOriMethod() - Method in interface nxopen.cae.ShellEADBuilder

Returns the get selection ori operator gets material orientation method
License requirements: nx_masterfem ("Finite Element Modeling")
.

setMatrix(Matrix3x3) - Method in interface nxopen.die.QuickBinderWrapBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setMatrix(Matrix3x3) - Method in interface nxopen.IPlane

License requirements: None.

setMatrixPropertyValue(String, ScalarMatrixValue) - Method in interface nxopen.BasePropertyTable

Set a matrix cell value from the matrix value of the property
License requirements: None.

setMax(double) - Method in interface nxopen.geometricanalysis.FaceAnalysisDataRangeBuilder

License requirements: None.

setMaxAcceleration(double) - Method in interface nxopen.sim.KinematicAxisBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setMaxAngleToggle(boolean) - Method in interface nxopen.cae.ElementSplitBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setMaxAngleValue(double) - Method in interface nxopen.cae.ElementSplitBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setMaxAngularIncr(double) - Method in interface nxopen.cam.SimulationOptionsBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setMaxAngularIncrement(double) - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setMaxArraySize(int) - Method in interface nxopen.cae.responsesimulation.EvaluationParameters

License requirements: nx_response_anlys ("NX Response Analysis")
.

setMaxCheckingAngle(double) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setMaxCheckingDist(double) - Method in interface nxopen.features.RefitFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setMaxCheckingDistance(double) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setMaxClosestNodeDistance(double) - Method in interface nxopen.cae.connections.Element

License requirements: nx_masterfem ("Finite Element Modeling")
.

setMaxConstraintViolation(double) - Method in interface nxopen.cae.optimization.DAOStopCondition

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setMaxDeceleration(double) - Method in interface nxopen.sim.KinematicAxisBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setMaxDepthToggle(boolean) - Method in interface nxopen.cam.TurningToolBuilder

License requirements: None.

setMaxDisplayObjects(int) - Method in interface nxopen.validate.Parser

License requirements: None.

setMaxDistanceToOuterMargin(double) - Method in interface nxopen.tooling.AutoDimensionBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setMaxEdges(int) - Method in interface nxopen.facet.FillHoleBuilder

License requirements: None.

setMaxFacingDiameterToggle(boolean) - Method in interface nxopen.cam.TurningToolBuilder

License requirements: None.

setMaxFrictionForce(double) - Method in interface nxopen.motion.JointFrictionRecurDyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using Motion.JointFrictionRecurDyn#maxFrictionForceExpression to query or edit it.

setMaxFrictionTorque(double) - Method in interface nxopen.motion.JointFrictionRecurDyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using Motion.JointFrictionRecurDyn#maxFrictionTorqueExpression to query or edit it.

setMaxGapDist(double) - Method in interface nxopen.cam.LaserProfileMove

License requirements: cam_base ("CAM BASE")
.

setMaximum(double) - Method in interface nxopen.cam.ContourAngle

License requirements: cam_base ("CAM BASE")
.

setMaximumAlternatingStress(DurabilityEventFatigueSettingsBuilder.MaximumAlternatingStressEnum) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setMaximumAngle(double) - Method in interface nxopen.cam.NCAssistantBuilder

License requirements: cam_base ("CAM BASE")
.

setMaximumAngle(double) - Method in interface nxopen.tooling.LsdynaKfileGeneratorBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setMaximumAreaMode(RoughFinishTurningBuilder.MaximumAreaModes) - Method in interface nxopen.cam.RoughFinishTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setMaximumAreaSize(double) - Method in interface nxopen.cam.RoughFinishTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setMaximumAreaUnit(RoughFinishTurningBuilder.MinmaxAreaUnits) - Method in interface nxopen.cam.RoughFinishTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setMaximumAverage(double) - Method in interface nxopen.cam.StepoverBuilder

License requirements: cam_base ("CAM BASE")
.

setMaximumBendRadius(double) - Method in interface nxopen.weld.AutoPointBuilder

License requirements: ugweld ("UG WELD")
.

setMaximumCenterlineWidth(double) - Method in interface nxopen.weld.AutoPointBuilder

License requirements: ugweld ("UG WELD")
.

setMaximumCharactersAccepted(int) - Method in interface nxopen.blockstyler.MultilineString

License requirements: None.

setMaximumCheckingDistance(double) - Method in interface nxopen.facet.MultiPatchAlignmentBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setMaximumCsysFaceNormalAngle(WeldAdvisorCustomerDefault, double) - Method in interface nxopen.weld.WeldAdvisorBuilder

The weld advisor parameter Maximum CSYS Face Normal Angle
License requirements: ugweld ("UG WELD")
.

setMaximumDegree(int) - Method in interface nxopen.features.BridgeCurveBuilder

Deprecated.

Deprecated in NX8.5.0. Use BridgeCurveBuilderEx instead.

setMaximumDegree(int) - Method in interface nxopen.features.JoinCurvesBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setMaximumDegree(int) - Method in interface nxopen.geometricutilities.CurveFitData

License requirements: None.

setMaximumDegree(int) - Method in interface nxopen.geometricutilities.CurveFitOptions

Sets the maximum degree method
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setMaximumDegree(int) - Method in interface nxopen.geometricutilities.Rebuild

Sets the maximum degree when rebuild type is advanced.

setMaximumDeviation(double) - Method in interface nxopen.facet.FacetBodyFromBodyBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setMaximumDeviation(double) - Method in interface nxopen.tooling.LsdynaKfileGeneratorBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setMaximumDistanceToGeometry(double) - Method in interface nxopen.drafting.AutomationPreferencesBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setMaximumElementSize(double) - Method in interface nxopen.tooling.LsdynaKfileGeneratorBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setMaximumExcludedObjects(int) - Method in interface nxopen.features.OffsetSurfaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setMaximumFaceGap(double) - Method in interface nxopen.weld.WeldJointBuilder

License requirements: structure_weld ("STRUCTURE WELD")
.

setMaximumGap(double) - Method in interface nxopen.die.CompensateRoughDataBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setMaximumGapToGeometry(double) - Method in interface nxopen.drafting.AutomationRuleBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setMaximumHeight(double) - Method in interface nxopen.annotations.TableSectionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setMaximumHeight(int) - Method in interface nxopen.blockstyler.ListBox

License requirements: None.

setMaximumHeight(int) - Method in interface nxopen.blockstyler.MultilineString

License requirements: None.

setMaximumHeight(int) - Method in interface nxopen.blockstyler.SetList

License requirements: None.

setMaximumHeight(int) - Method in interface nxopen.blockstyler.Tree

License requirements: None.

setMaximumIterationNumber(int) - Method in interface nxopen.cae.optimization.TBSStopCondition

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setMaximumLabelEnabled(boolean) - Method in interface nxopen.geometricutilities.CombOptionsBuilder

License requirements: None.

setMaximumLeadAngle(double) - Method in interface nxopen.cam.ToolAxisVariable

License requirements: cam_base ("CAM BASE")
.

setMaximumLeadAngleType(ToolAxisVariable.MaximumLeadAngleTypes) - Method in interface nxopen.cam.ToolAxisVariable

License requirements: cam_base ("CAM BASE")
.

setMaximumLegendsInGraph(int) - Method in interface nxopen.cae.xyplot.Preference

License requirements: nx_ftk ("NX Advanced Graphing")
.

setMaximumLevel(double) - Method in interface nxopen.cam.NCAssistantBuilder

License requirements: cam_base ("CAM BASE")
.

setMaximumNumberLoosePanels(WeldAdvisorCustomerDefault, int) - Method in interface nxopen.weld.WeldAdvisorBuilder

The weld advisor parameter Maximum Number of Loose Panels
License requirements: ugweld ("UG WELD")
.

setMaximumNumberOfFacesSearched(int) - Method in interface nxopen.tooling.MWSearchRegionBuilder

License requirements: None.

setMaximumPathLength(double) - Method in interface nxopen.routing.electrical.Connection

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setMaximumPointFaceDistance(WeldAdvisorCustomerDefault, double) - Method in interface nxopen.weld.WeldAdvisorBuilder

The weld advisor parameter Maximum Point Face Distance
License requirements: ugweld ("UG WELD")
.

setMaximumPrincipalAngle(boolean) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setMaximumPrincipalStrain(boolean) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setMaximumPrincipalStress(boolean) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setMaximumRadius(double) - Method in interface nxopen.cam.NCAssistantBuilder

License requirements: cam_base ("CAM BASE")
.

setMaximumRecentReportDocumentCount(int) - Method in interface nxopen.report.ReportPreference

License requirements: None.

setMaximumScopeAsString(String) - Method in interface nxopen.blockstyler.BodyCollector

License requirements: None.

setMaximumScopeAsString(String) - Method in interface nxopen.blockstyler.CurveCollector

License requirements: None.

setMaximumScopeAsString(String) - Method in interface nxopen.blockstyler.FaceCollector

License requirements: None.

setMaximumScopeAsString(String) - Method in interface nxopen.blockstyler.SelectObject

License requirements: None.

setMaximumSegment(int) - Method in interface nxopen.features.BridgeCurveBuilder

Deprecated.

Deprecated in NX8.5.0. Use BridgeCurveBuilderEx instead.

setMaximumSegments(int) - Method in interface nxopen.features.JoinCurvesBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setMaximumSegments(int) - Method in interface nxopen.geometricutilities.CurveFitData

License requirements: None.

setMaximumSegments(int) - Method in interface nxopen.geometricutilities.CurveFitOptions

Sets the maximum segments method
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setMaximumSegments(int) - Method in interface nxopen.geometricutilities.Rebuild

Sets the maximum segments when rebuild type is advanced.

setMaximumShearStrain(boolean) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setMaximumShearStress(boolean) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setMaximumSingleThickness(double) - Method in interface nxopen.weld.AutoPointBuilder

License requirements: ugweld ("UG WELD")
.

setMaximumSizeMode(RoughFinishTurningBuilder.MinmaxSizeModes) - Method in interface nxopen.cam.RoughFinishTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setMaximumSolutions(int) - Method in interface nxopen.preferences.RoutingPart

Sets the maximum number of placement solutions to generate when determining placement solutions for a component.

setMaximumSpacing(double) - Method in interface nxopen.cam.InspectionCurveFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setMaximumSpacing(double) - Method in interface nxopen.weld.EasyPatternBuilder

License requirements: ugweld ("UG WELD")
.

setMaximumSpacingBetweenPoints(double) - Method in interface nxopen.weld.AutoPointBuilder

License requirements: ugweld ("UG WELD")
.

setMaximumStackUpGap(WeldAdvisorCustomerDefault, double) - Method in interface nxopen.weld.WeldAdvisorBuilder

The weld advisor parameter Maximum Stack Up Gap
License requirements: ugweld ("UG WELD")
.

setMaximumStepSizeFactor(double) - Method in interface nxopen.motion.BodyContactRecurdyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using BodyContactRecurdyn.maximumStepSizeFactorExpression() to query or edit it.

setMaximumStepSizeFactor(double) - Method in interface nxopen.motion.CurveContactRecurdyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using CurveContactRecurdyn.maximumStepSizeFactorExpression() to query or edit it.

setMaximumStringLength(int) - Method in interface nxopen.blockstyler.ListBox

License requirements: None.

setMaximumSubGraphsInStack(int) - Method in interface nxopen.cae.xyplot.Preference

License requirements: nx_ftk ("NX Advanced Graphing")
.

setMaximumText(String) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

License requirements: None.

setMaximumTextType(SearchModelViewBuilder.TextComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

License requirements: None.

setMaximumTiltAngle(double) - Method in interface nxopen.cam.ToolAxisVariable

License requirements: cam_base ("CAM BASE")
.

setMaximumTolerance(boolean) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setMaximumToleranceValue(String) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setMaximumTotalMetalThickness(WeldAdvisorCustomerDefault, double) - Method in interface nxopen.weld.WeldAdvisorBuilder

The weld advisor parameter Maximum Total Metal Thickness
License requirements: ugweld ("UG WELD")
.

setMaximumValue(double) - Method in interface nxopen.blockstyler.AngularDimension

License requirements: None.

setMaximumValue(double) - Method in interface nxopen.blockstyler.DoubleBlock

License requirements: None.

setMaximumValue(double) - Method in interface nxopen.blockstyler.ExpressionBlock

License requirements: None.

setMaximumValue(int) - Method in interface nxopen.blockstyler.IntegerBlock

License requirements: None.

setMaximumValue(double) - Method in interface nxopen.blockstyler.LinearDimension

License requirements: None.

setMaximumValue(double) - Method in interface nxopen.blockstyler.OnPathDimension

License requirements: None.

setMaximumValue(double) - Method in interface nxopen.blockstyler.RadiusDimension

License requirements: None.

setMaximumValue(double) - Method in interface nxopen.report.DoubleArgument

License requirements: None.

setMaximumValue(int) - Method in interface nxopen.report.IntegerArgument

License requirements: None.

setMaximumValues(int, int, double[]) - Method in interface nxopen.blockstyler.DoubleTable

Sets the MaximumValues
License requirements: None.

setMaximumValues(int, int, int[]) - Method in interface nxopen.blockstyler.IntegerTable

Sets the MaximumValues
License requirements: None.

setMaximumVelocity(double) - Method in interface nxopen.sim.KinematicAxisBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setMaxInclusive(boolean) - Method in interface nxopen.blockstyler.AngularDimension

License requirements: None.

setMaxInclusive(boolean) - Method in interface nxopen.blockstyler.DoubleBlock

License requirements: None.

setMaxInclusive(boolean) - Method in interface nxopen.blockstyler.ExpressionBlock

License requirements: None.

setMaxInclusive(boolean) - Method in interface nxopen.blockstyler.IntegerBlock

License requirements: None.

setMaxInclusive(boolean) - Method in interface nxopen.blockstyler.LinearDimension

License requirements: None.

setMaxInclusive(boolean) - Method in interface nxopen.blockstyler.OnPathDimension

License requirements: None.

setMaxInclusive(boolean) - Method in interface nxopen.blockstyler.RadiusDimension

License requirements: None.

setMaxInteger(int) - Method in interface nxopen.AttributeTemplatesBuilder

License requirements: None.

setMaxIteration(int) - Method in interface nxopen.mechatronics.PreferencesBuilder

Deprecated.

Deprecated in NX9.0.0. This functionality is no longer supported.

setMaxIteration(int) - Method in interface nxopen.motion.AdamsSolverProperty

License requirements: mechanisms ("MECHANISMS")
.

setMaxIterations(int) - Method in interface nxopen.cae.ModelUpdateOptimOptionsBuilder

License requirements: nx_correl_update ("FE Model Update")
.

setMaxIterations(int) - Method in interface nxopen.cae.optimization.DAOStopCondition

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setMaxKinematicIteration(int) - Method in interface nxopen.motion.AdamsSolverProperty

License requirements: mechanisms ("MECHANISMS")
.

setMaxLengthIncr(double) - Method in interface nxopen.cam.SimulationOptionsBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setMaxLengthIncrement(double) - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setMaxLineThickness(double) - Method in interface nxopen.IgesCreator

License requirements: None.

setMaxLineThickness(double) - Method in interface nxopen.NXTo2dCreator

License requirements: None.

setMaxMeanRange(double) - Method in interface nxopen.cae.DurabilityDamageEvaluationBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setMaxNeedleLength(double) - Method in interface nxopen.geometricutilities.CombOptionsBuilder

License requirements: None.

setMaxNominalRange(double) - Method in interface nxopen.cae.DurabilityDamageEvaluationBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setMaxNumber(double) - Method in interface nxopen.AttributeTemplatesBuilder

License requirements: None.

setMaxNumberIteration(int) - Method in interface nxopen.optimization.OptimizationBuilder

License requirements: None.

setMaxNumberOfCurves(int) - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setMaxParamId(int) - Method in interface nxopen.mechatronics.ProxyObjectBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setMaxRatioLongFacets(double) - Method in interface nxopen.facet.CleanupFacetBodyBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setMaxSignalId(int) - Method in interface nxopen.mechatronics.SignalAdapterBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setMaxSolverError(double) - Method in interface nxopen.motion.AdamsSolverProperty

Deprecated.

Deprecated in NX8.5.0. Obtion the exression using AdamsSolverProperty.maxSolverErrorExpression() to query or edit it.

setMaxSpacing(double) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setMaxStaticIteration(int) - Method in interface nxopen.motion.AdamsSolverProperty

License requirements: mechanisms ("MECHANISMS")
.

setMaxStepSize(double) - Method in interface nxopen.motion.AdamsSolverProperty

Deprecated.

Deprecated in NX8.5.0. Obtion the exression using AdamsSolverProperty.maxStepSizeExpression() to query or edit it.

setMaxStictionDeformation(double) - Method in interface nxopen.motion.JointFrictionAdams

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using Motion.JointFrictionAdams#maxStictionDeformationExpression to query or edit it.

setMaxStictionDeformation(double) - Method in interface nxopen.motion.JointFrictionRecurDyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using Motion.JointFrictionRecurDyn#maxStictionDeformationExpression to query or edit it.

setMaxString(String) - Method in interface nxopen.AttributeTemplatesBuilder

License requirements: None.

setMaxSystem3DModelSpace(boolean) - Method in interface nxopen.NXTo2dCreator

License requirements: None.

setMaxSystemPointRes(boolean) - Method in interface nxopen.NXTo2dCreator

License requirements: None.

setMaxTextLength(int) - Method in interface nxopen.blockstyler.StringBlock

License requirements: None.

setMaxThreeDMdlSpace(double) - Method in interface nxopen.IgesCreator

License requirements: None.

setMaxTiltAngle(double) - Method in interface nxopen.cam.LaserProfileMove

License requirements: cam_base ("CAM BASE")
.

setMaxTiltAngle(double) - Method in interface nxopen.cam.ToolPathTiltBuilder

Deprecated.

Deprecated in NX9.0.0. Use ToolPathTiltMachine.maxTiltAngle() instead.

setMaxTiltAngle(double) - Method in interface nxopen.cam.ToolPathTiltMachine

License requirements: None.

setMaxTime(int) - Method in interface nxopen.optimization.OptimizationBuilder

License requirements: None.

setMaxTimeIncr(double) - Method in interface nxopen.cam.SimulationOptionsBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setMaxToggle(boolean) - Method in interface nxopen.cam.InspectionCmmCommandBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setMaxToolAxisChange(double) - Method in interface nxopen.cam.NcmScBuilder

Deprecated.

Deprecated in NX9.0.0. Use NcmScBuilder.smoothingBuilder() instead.

setMaxToolAxisChange(double) - Method in interface nxopen.cam.NcmTransfer

License requirements: cam_base ("CAM BASE")
.

setMaxToolAxisChange(double) - Method in interface nxopen.cam.ToolPathTiltMachine

License requirements: None.

setMaxToolReachToggle(boolean) - Method in interface nxopen.cam.TurningToolBuilder

License requirements: None.

setMaxUser3DModelSpace(double) - Method in interface nxopen.NXTo2dCreator

License requirements: None.

setMaxUserPointRes(double) - Method in interface nxopen.NXTo2dCreator

License requirements: None.

setMaxValue(double) - Method in interface nxopen.cam.InspectionCmmCommandBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setMaxWallHeight(double) - Method in interface nxopen.cam.ToolAxisTilt

License requirements: cam_base ("CAM BASE")
.

setMCDConnection(boolean, String, TaggedObject) - Method in interface nxopen.mechatronics.RuntimeNCBuilder

This method is used to set the MCD connected object to the specified axis or machine event
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setMcdMechanicalData(SIZERExportBuilder.MCDMechanicalData[]) - Method in interface nxopen.tooling.SIZERExportBuilder

Sets all groups of mechanical data in MCD mode.

setMcfPath(String) - Method in interface nxopen.sim.KinematicImportMcfBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setMcs(CartesianCoordinateSystem) - Method in interface nxopen.cam.OrientGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setMcsDisplay(boolean) - Method in interface nxopen.cam.CAMSession

Set MCS display
License requirements: cam_base ("CAM BASE")
.

setMcsSpindleGroup(NCGroup) - Method in interface nxopen.cam.TurningToolBuilder

License requirements: None.

setMctTurrentId(String) - Method in interface nxopen.cam.MachineTurretGroupBuilder

License requirements: None.

setMctTurrentWpl(CartesianCoordinateSystem) - Method in interface nxopen.cam.MachineTurretGroupBuilder

Deprecated.

Deprecated in NX9.0.0. None

setMctTurrentWplType(MachineTurretGroupBuilder.MctTurrentWplTypes) - Method in interface nxopen.cam.MachineTurretGroupBuilder

Deprecated.

Deprecated in NX9.0.0. None

setMdfFileName(String) - Method in interface nxopen.cae.DurabilityTransientEventBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setMdynamics(MachineToolConfiguration.MdynamicsTypes) - Method in interface nxopen.sim.MachineToolConfiguration

Sets the Mdynamics value
License requirements: None.

setMeaFile(String) - Method in interface nxopen.cam.InspectionMeasDataBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setMeasure(InverseBendingLinesBuilder.MeasureType) - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setMeasureAlong(OrientationPointMethodsBuilder.MeasureAlongTypes) - Method in interface nxopen.features.shipdesign.OrientationPointMethodsBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setMeasureAlongMode(StiffenerSystemBuilder.MeasureAlongModes) - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setMeasureAngles(OrientationDefinitionBuilder.MeasureAngleTypes) - Method in interface nxopen.features.shipdesign.OrientationDefinitionBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setMeasuredGeometry(NXObject) - Method in interface nxopen.cam.InspectionUVGridBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setMeasureFrom(NcmScEngRetBuilder.MeasureFromTypes) - Method in interface nxopen.cam.NcmScEngRetBuilder

License requirements: cam_base ("CAM BASE")
.

setMeasurementDefaultHeight(double) - Method in interface nxopen.weld.WeldPointBuilder

Sets the default height of the object for measurement to be created.

setMeasurementDefaultWidth(double) - Method in interface nxopen.weld.WeldPointBuilder

Sets the default width of the object for measurement to be created.

setMeasurementDepth(double) - Method in interface nxopen.cam.ProbeInspectBorebossMoveBuilder

License requirements: None.

setMeasurementDirection(Direction) - Method in interface nxopen.annotations.Dimension

Sets the measurement direction.

setMeasurementDirection(Direction) - Method in interface nxopen.annotations.DimensionData

Sets the measurement direction
License requirements: None.

setMeasurementDirectionView(View) - Method in interface nxopen.annotations.Dimension

Sets the measurement direction view.

setMeasurementDirectionView(View) - Method in interface nxopen.annotations.DimensionData

Sets the measurement direction view
License requirements: None.

setMeasurementHoleSize(double) - Method in interface nxopen.weld.WeldPointBuilder

Sets the hole_size of the object for measurement to be created.

setMeasurementIdLowerRange(int) - Method in interface nxopen.weld.WeldPreferenceBuilder

License requirements: ugweld ("UG WELD")
.

setMeasurementIdUpperRange(int) - Method in interface nxopen.weld.WeldPreferenceBuilder

License requirements: ugweld ("UG WELD")
.

setMeasurementMethod(HeadImpactAPillarDetailBuilder.MeasurementMethodType) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setMeasurementMethod(DeviationGaugeBuilder.MeasurementMethodType) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setMeasurementNamePrefix(String) - Method in interface nxopen.weld.WeldPreferenceBuilder

License requirements: ugweld ("UG WELD")
.

setMeasurementObjectColor(NXColor) - Method in interface nxopen.weld.WeldPreferenceBuilder

License requirements: ugweld ("UG WELD")
.

setMeasurementObjectLayer(int) - Method in interface nxopen.weld.WeldPreferenceBuilder

License requirements: ugweld ("UG WELD")
.

setMeasurementPartNumber(String) - Method in interface nxopen.weld.WeldPreferenceBuilder

License requirements: ugweld ("UG WELD")
.

setMeasurementSamples(int) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setMeasurementSelectedPrefix(String[]) - Method in interface nxopen.weld.WeldPreferenceBuilder

The measurement selected prefix
License requirements: ugweld ("UG WELD")
.

setMeasurementSelectedSuffix(String[]) - Method in interface nxopen.weld.WeldPreferenceBuilder

Selected measurement suffix
License requirements: ugweld ("UG WELD")
.

setMeasurementSlotLength(double) - Method in interface nxopen.weld.WeldPointBuilder

Sets the slot height of the object for measurement to be created.

setMeasurementSlotWidth(double) - Method in interface nxopen.weld.WeldPointBuilder

Sets the slot width of the object for measurement to be created.

setMeasurementStudSize(double) - Method in interface nxopen.weld.WeldPointBuilder

Sets the stud size of the object for measurement to be created.

setMeasurementType(Dimension.MeasurementTypes) - Method in interface nxopen.annotations.BaseLinearDimensionBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setMeasurementType(SearchCriteriaDimensionBuilder.MeasurementTypes) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder

License requirements: None.

setMeasurementType(ProbeInspectSurfacePointMoveBuilder.Measurement) - Method in interface nxopen.cam.ProbeInspectSurfacePointMoveBuilder

License requirements: None.

setMeasureName(String) - Method in interface nxopen.cae.ftk.BaseUnit

Sets measure name
License requirements: nx_ftk ("NX Advanced Graphing")
.

setMeasureOfValue(UFVariant, String) - Method in interface nxopen.uf.UFKf

Refer to UF_KF_set_measure_of_value for documentation.

setMeasureOption(boolean) - Method in interface nxopen.motion.PostProcess

Set measure option animation/articulation/spreadsheet run
License requirements: mechanisms ("MECHANISMS")
.

setMeasureType(AccelerometerBuilder.OutputMeasureType) - Method in interface nxopen.mechatronics.AccelerometerBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setMeasureType(DistanceSensorBuilder.OutputMeasureType) - Method in interface nxopen.mechatronics.DistanceSensorBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setMeasureType(GenericSensorBuilder.OutputMeasureType) - Method in interface nxopen.mechatronics.GenericSensorBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setMeasureType(InclinometerBuilder.OutputMeasureType) - Method in interface nxopen.mechatronics.InclinometerBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setMeasureType(PositionSensorBuilder.OutputMeasureType) - Method in interface nxopen.mechatronics.PositionSensorBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setMeasureType(VelocitySensorBuilder.OutputMeasureType) - Method in interface nxopen.mechatronics.VelocitySensorBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setMeasuringPoint(Point) - Method in interface nxopen.cam.TurnRoughFinishTestCut

License requirements: cam_base ("CAM BASE")
.

setMeasuringPosition(TurnRoughFinishTestCut.MeasuringPositionTypes) - Method in interface nxopen.cam.TurnRoughFinishTestCut

License requirements: cam_base ("CAM BASE")
.

setMechanicalData(SIZERExportBuilder.MechanicalData[]) - Method in interface nxopen.tooling.SIZERExportBuilder

Sets all groups of mechanical data in Motion mode.

setMechatronicsType(MechatronicsBuilder.MechatronicsModelType) - Method in interface nxopen.motion.MechatronicsBuilder

License requirements: mechanisms ("MECHANISMS")
.

setMemberData(PartFamilyMemberValues[]) - Method in interface nxopen.PartFamilyMemberData

Deprecated.

Deprecated in NX9.0.0. Use TemplateManager.addInstanceDefinition(java.lang.String, nxopen.partfamily.InstanceDefinition, java.lang.String) and InstanceDefinition.setValueOfAttribute(nxopen.partfamily.FamilyAttribute, java.lang.String) instead

setMemberLayers(int[]) - Method in interface nxopen.layer.Category

Sets which layers belong to the category
License requirements: None.

setMembers(SetObject[]) - Method in interface nxopen.cae.CAESet

Sets the objects in the set.

setMemberValues(String[]) - Method in interface nxopen.PartFamilyMemberValues

Deprecated.

Deprecated in NX9.0.0. Use InstanceDefinition.setValueOfAttribute(nxopen.partfamily.FamilyAttribute, java.lang.String) and TemplateManager.getPartFamilyAttribute(nxopen.partfamily.FamilyAttribute.AttrType, java.lang.String) instead.

setMenu(TreeListMenu) - Method in interface nxopen.blockstyler.Tree

Sets the menu, resulting the menu to appear on the screen.

setMenu(TreeListMenu) - Method in interface nxopen.blockstyler.Wizard

Set the menu items for the popup menu for a step, sub-node or the background in the Task Navigator.

setMergeAngleTolerance(double) - Method in interface nxopen.features.MidSurfaceByFacePairsBuilder

License requirements: None.

setMergeCellsWithSameSize(boolean) - Method in interface nxopen.annotations.HoleTableSettingsFormatBuilder

License requirements: drafting ("DRAFTING")
.

setMergeDuplicateRcps(RoutingPath.MergeDupRcps) - Method in interface nxopen.preferences.RoutingPath

License requirements: routing_base ("Routing Basic")
.

setMergeDupNode(boolean) - Method in interface nxopen.cae.ElementSplitBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setMergeEdges(boolean) - Method in interface nxopen.cae.MappedMeshBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setMergeFaces(boolean) - Method in interface nxopen.features.NSidedSurfaceBuilder

License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

setMergeFacesIfPossible(boolean) - Method in interface nxopen.features.LawExtensionBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING")
.

setMergeFacesIfPossible(boolean) - Method in interface nxopen.features.LawExtensionBuilderEx

License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING")
.

setMergeFacesIfPossible(boolean) - Method in interface nxopen.features.SilhouetteFlangeBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setMergeFacesOption(boolean) - Method in interface nxopen.features.VarsweepBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setMergeOccurrenceNodes(boolean) - Method in interface nxopen.cae.modelcheck.DuplicateNodesCheckBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setMergeOutput(boolean) - Method in interface nxopen.tooling.RemoveHolesBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setMergePrevious(boolean) - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder

License requirements: None.

setMergeSheets(boolean) - Method in interface nxopen.JtCreator

License requirements: None.

setMergeSolids(boolean) - Method in interface nxopen.JtCreator

License requirements: None.

setMergeType(SmoothCurveStringBuilder.MergeTypes) - Method in interface nxopen.features.SmoothCurveStringBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setMesh(boolean) - Method in interface nxopen.cae.NodeElementInfoBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setMeshAttemptMapping(boolean) - Method in interface nxopen.bodydes.OnestepUnformBuilder

License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setMeshAttemptMapping(boolean) - Method in interface nxopen.die.TrimLineDevelopmentBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setMeshCollector(boolean) - Method in interface nxopen.cae.NodeElementInfoBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setMeshCollectorName(String) - Method in interface nxopen.cae.ElementModifyTypeBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setMeshCollectorName(String) - Method in interface nxopen.cae.ElementTranslateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setMeshCollectorName(MeshCollector, String) - Method in interface nxopen.cae.MeshManager

Renames a mesh collector object
License requirements: nx_masterfem ("Finite Element Modeling")
.

setMeshContext(Mesh) - Method in interface nxopen.cae.ThicknessBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setMeshCreateOption(Mesh0dBuilder.MeshCreationType) - Method in interface nxopen.cae.Mesh0dBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setMeshDensityType(CAEWeldConnectionBuilder.MeshDensityTypeEnum) - Method in interface nxopen.cae.CAEWeldConnectionBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setMeshElementSize(double) - Method in interface nxopen.bodydes.OnestepUnformBuilder

License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setMeshElementSize(double) - Method in interface nxopen.die.TrimLineDevelopmentBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setMeshElementType(OnestepUnformBuilder.MeshElement) - Method in interface nxopen.bodydes.OnestepUnformBuilder

License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setMeshElementType(TrimLineDevelopmentBuilder.MeshElement) - Method in interface nxopen.die.TrimLineDevelopmentBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setMeshesToPlot(Mesh[]) - Method in interface nxopen.cae.ThicknessPlotContoursBuilder

Sets Mesh objects to plot.

setMeshMateSize(int) - Method in interface nxopen.cae.MeshControlDisplayOptionsBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setMeshMatingOption(MMCCreateBuilder.MeshMatingType) - Method in interface nxopen.cae.MMCCreateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setMeshMaxJacobian(double) - Method in interface nxopen.bodydes.OnestepUnformBuilder

License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setMeshMaxJacobian(double) - Method in interface nxopen.die.TrimLineDevelopmentBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setMeshMaxWarp(double) - Method in interface nxopen.bodydes.OnestepUnformBuilder

License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setMeshMaxWarp(double) - Method in interface nxopen.die.TrimLineDevelopmentBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setMeshName(String) - Method in interface nxopen.cae.ElementCreateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setMeshName(String) - Method in interface nxopen.cae.ElementExtrudeBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setMeshName(String) - Method in interface nxopen.cae.ElementProjectBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setMeshName(String) - Method in interface nxopen.cae.ElementReflectBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setMeshName(String) - Method in interface nxopen.cae.ElementRevolveBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setMeshName(String) - Method in interface nxopen.cae.ElementTranslateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setMeshName(String) - Method in interface nxopen.cae.PrimitiveRecipeMeshBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setMeshName(String) - Method in interface nxopen.cae.SpiderElementBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setMeshPreferences(NXColor, double, int, double, int) - Method in interface nxopen.cae.FemPart

Sets the mesh preferences data associated with the fem part
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setMeshProcessFillet(boolean) - Method in interface nxopen.bodydes.OnestepUnformBuilder

License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setMeshProcessFillet(boolean) - Method in interface nxopen.die.TrimLineDevelopmentBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setMeshSizeVariation(int) - Method in interface nxopen.bodydes.OnestepUnformBuilder

License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setMeshSizeVariation(double) - Method in interface nxopen.cae.Shell2SolidBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setMeshSizeVariation(int) - Method in interface nxopen.die.TrimLineDevelopmentBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setMeshSmallFeature(double) - Method in interface nxopen.bodydes.OnestepUnformBuilder

License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setMeshSmallFeature(double) - Method in interface nxopen.die.TrimLineDevelopmentBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setMeshSmoothStrategy(TBSMeshSmooth.Strategy) - Method in interface nxopen.cae.optimization.TBSMeshSmooth

License requirements: cae_opt_toposhape ("NX Shape Optimization")
.

setMeshSplitQuad(boolean) - Method in interface nxopen.bodydes.OnestepUnformBuilder

License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setMeshSplitQuad(boolean) - Method in interface nxopen.die.TrimLineDevelopmentBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setMeshTopologyOption(MeshTransformerBuilder.MeshTopologyType) - Method in interface nxopen.features.MeshTransformerBuilder

License requirements: None.

setMeshType(DependentMeshBuilder.MeshType) - Method in interface nxopen.cae.DependentMeshBuilder

The mesh type
License requirements: nx_masterfem ("Finite Element Modeling")
.

setMeshVisuals(Tag) - Method in interface nxopen.uf.UFSf

Refer to UF_SF_set_mesh_visuals for documentation.

setMessages(Step242Importer.MessageEnum) - Method in interface nxopen.Step242Importer

License requirements: None.

setMessagesInconsistentRevisions(SessionPdm.MessagesInconsistentRevisionsType) - Method in interface nxopen.preferences.SessionPdm

License requirements: None.

setMetaSolutionName(String) - Method in interface nxopen.cae.DurabilityMetaSolutionBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setMethod(DimensionMeasurementBuilder.MeasurementMethod) - Method in interface nxopen.annotations.DimensionMeasurementBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING")
.

setMethod(DimensionSetBuilder.DimensionSetMethod) - Method in interface nxopen.annotations.DimensionSetBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING")
.

setMethod(ElementConnectivityBuilder.Methods) - Method in interface nxopen.cae.ElementConnectivityBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setMethod(ElementTranslateBuilder.MethodType) - Method in interface nxopen.cae.ElementTranslateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setMethod(ModelUpdateOptimOptionsBuilder.MethodChoice) - Method in interface nxopen.cae.ModelUpdateOptimOptionsBuilder

License requirements: nx_correl_update ("FE Model Update")
.

setMethod(BoundaryTurnMemberOffset.MethodType) - Method in interface nxopen.cam.BoundaryTurnMemberOffset

License requirements: cam_base ("CAM BASE")
.

setMethod(InPathEventDataBuilder.LocationMethod) - Method in interface nxopen.cam.InPathEventDataBuilder

License requirements: cam_base ("CAM BASE")
.

setMethod(ToolAxisChange.MethodTypes) - Method in interface nxopen.cam.ToolAxisChange

License requirements: cam_base ("CAM BASE")
.

setMethod(AddSurfBuilder.Methods) - Method in interface nxopen.die.AddSurfBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setMethod(NonProportionalZoom.MethodType) - Method in interface nxopen.display.NonProportionalZoom

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setMethod(BordersAndZonesBuilder.ZoneMethod) - Method in interface nxopen.drawings.BordersAndZonesBuilder

Deprecated.

Deprecated in NX10.0.0. Use SheetBorderSettingsBuilder.method() instead.

setMethod(Method) - Method in interface nxopen.drawings.SheetBorderSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setMethod(ChamferBuilder.OffsetMethod) - Method in interface nxopen.features.ChamferBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setMethod(OffsetEdgeBuilder.OffsetEdgeMethod) - Method in interface nxopen.features.OffsetEdgeBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setMethod(InverseBendingLinesBuilder.MethodType) - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setMethod(VariableOffsetBuilder.MethodOptions) - Method in interface nxopen.features.VariableOffsetBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setMethod(CurveCurvatureAnalysisBuilder.CalculationMethod) - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder

License requirements: None.

setMethod(SpineDefinitionBuilder.MethodOptions) - Method in interface nxopen.geometricutilities.SpineDefinitionBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setMethod(PlaneTypes.MethodType) - Method in interface nxopen.IPlane

Sets a plane type
License requirements: None.

setMethod(CreateComponentFrom3DBuilder.CreateMethod) - Method in interface nxopen.layout2d.CreateComponentFrom3DBuilder

License requirements: nx_layout ("NX Layout")
.

setMethod(BendCornerTypeBuilder.BendMethod) - Method in interface nxopen.mechanicalrouting.BendCornerTypeBuilder

License requirements: routing_base ("Routing Basic")
.

setMethod(ModelingViewHighQualityImage.ShadeMethod) - Method in interface nxopen.ModelingViewHighQualityImage

Sets the method to use for the generation of the High Quality Image.

setMethod(WeldArcMethod) - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. Use WeldGrooveBuilder.createSkipWelds() and WeldGrooveBuilder.setCreateSkipWelds(boolean) instead.

setMethod(WeldGrooveBuilder.SkipWeldMethod) - Method in interface nxopen.weld.WeldGrooveBuilder

License requirements: ugweld ("UG WELD")
.

setMethodChoice(PreTestExciterConfigBuilder.MethodChoiceType) - Method in interface nxopen.cae.PreTestExciterConfigBuilder

License requirements: nx_correl_base ("FE Correlation")
.

setMethodEnum(InspectionConstructedFeatureBuilder.MethodEnumType) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setMethodOption(ElementExtrudeBuilder.MethodType) - Method in interface nxopen.cae.ElementExtrudeBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setMethodOption(ElementProjectBuilder.MethodType) - Method in interface nxopen.cae.ElementProjectBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setMethodOption(NodeProjectBuilder.ProjectionMethodType) - Method in interface nxopen.cae.NodeProjectBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setMethodOption(NodeTranslateBuilder.MethodType) - Method in interface nxopen.cae.NodeTranslateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setMethodType(BeamSectionOrientationOptions.Method) - Method in interface nxopen.cae.BeamSectionOrientationOptions

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setMethodType(CAEConnectionBuilder.MethodTypeEnum) - Method in interface nxopen.cae.CAEConnectionBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setMethodType(InspectionMethodBuilder.MethodTypes) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setMethodType(SelPref.Method) - Method in interface nxopen.display.SelPref

License requirements: None.

setMethodType(MoldInsertBuilder.BooleanType) - Method in interface nxopen.tooling.MoldInsertBuilder

License requirements: None.

setMetricNominalDecimalPlaces(int) - Method in interface nxopen.annotations.Dimension

Sets a setting to control the number of decimal places for the nominal value of a metric dimension.

setMetricScale(ExpansionDrawingBuilder.JaExpansiondrawingbuilderMetricScale) - Method in interface nxopen.features.shipdesign.ExpansionDrawingBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setMetricSheetTemplateLocation(String) - Method in interface nxopen.drawings.DrawingSheetBuilder

License requirements: drafting ("DRAFTING")
.

setMetricToleranceDecimalPlaces(int) - Method in interface nxopen.annotations.Dimension

Sets a setting to control the number of decimal places for the metric tolerance value of a dimension.

setMfgFeatureGroup(Feature) - Method in interface nxopen.features.shipdesign.DvToMvMappingBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setMiddle(double) - Method in interface nxopen.geometricanalysis.FaceAnalysisDataRangeBuilder

License requirements: None.

setMiddleFaceCollector(ScCollector) - Method in interface nxopen.features.FaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setMiddleFaceNormFlag(boolean) - Method in interface nxopen.features.FaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setMiddlePlane(TBSCastCondition.MiddlePlaneType) - Method in interface nxopen.cae.optimization.TBSCastCondition

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setMiddlePlane(boolean) - Method in interface nxopen.features.vehicledesign.VisionPlaneBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setMiddlePlanePoint(Point) - Method in interface nxopen.cae.optimization.TBSCastCondition

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setMiddleScale(double) - Method in interface nxopen.geometricanalysis.FaceAnalysisDataRangeBuilder

License requirements: None.

setMidnode(boolean) - Method in interface nxopen.cae.BoltBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setMidNode(boolean) - Method in interface nxopen.cae.CAEConnectionBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setMidNodeMove(boolean) - Method in interface nxopen.cae.NodeAlignBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setMidNodeOption(MappedMeshBuilder.MidNodeType) - Method in interface nxopen.cae.MappedMeshBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setMidnodeType(ElementModifyOrderBuilder.Midnode) - Method in interface nxopen.cae.ElementModifyOrderBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setMidpoint(boolean) - Method in interface nxopen.InferredConstraintsBuilder

License requirements: None.

setMidpointCoords(int, Point2d) - Method in interface nxopen.geometricutilities.ShapeFrameBuilder

Sets the coordinates of the i-th midpoint of the frame with respect to the plane
License requirements: None.

setMidPointOptions(AssociativeArcBuilder.MidOption) - Method in interface nxopen.features.AssociativeArcBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setMidPointReference(AssociativeArcBuilder.MidReference) - Method in interface nxopen.features.AssociativeArcBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setMids(boolean) - Method in interface nxopen.cae.ResultVariable

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setMidsrfFeatureCreateMethod(Tag, int) - Method in interface nxopen.uf.UFModlFeatures

Refer to UF_MODL_set_midsrf_feature_create_method for documentation.

setMidThicknessColor(NXColor) - Method in interface nxopen.cae.ThicknessBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setMillPocketLocation(ConvertFromMCDBuilder.PocketLocationTypes) - Method in interface nxopen.cam.ConvertFromMCDBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setMillPocketNumber(int) - Method in interface nxopen.cam.ConvertFromMCDBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setMimimumNumberPointsOnOverlap(int) - Method in interface nxopen.weld.AutoPointBuilder

License requirements: ugweld ("UG WELD")
.

setMimimumValue(double) - Method in interface nxopen.report.DoubleArgument

License requirements: None.

setMin(double) - Method in interface nxopen.geometricanalysis.FaceAnalysisDataRangeBuilder

License requirements: None.

setMinAngle(double) - Method in interface nxopen.cam.TurnCornerControl

License requirements: cam_base ("CAM BASE")
.

setMinAngleFoldedFacets(double) - Method in interface nxopen.facet.CleanupFacetBodyBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setMinAngleToggle(boolean) - Method in interface nxopen.cae.ElementSplitBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setMinAngleValue(double) - Method in interface nxopen.cae.ElementSplitBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setMinBendRadius(double) - Method in interface nxopen.routing.electrical.ElectricalStockDefinition

Sets the min bend radius of stock
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setMinBoringDiameterToggle(boolean) - Method in interface nxopen.cam.TurningToolBuilder

License requirements: None.

setMinDampingStatus(boolean) - Method in interface nxopen.cae.responsesimulation.EvaluationParameters

License requirements: nx_response_anlys ("NX Response Analysis")
.

setMinElemThickness(double) - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setMinFacingDiameterToggle(boolean) - Method in interface nxopen.cam.TurningToolBuilder

License requirements: None.

setMinimalGraphicsWindow(boolean) - Method in interface nxopen.uf.UFUi

Refer to UF_UI_set_minimal_graphics_window for documentation.

setMinimalGraphicsWindowLocation(int, int, int, int) - Method in interface nxopen.uf.UFUi

Refer to UF_UI_set_minimal_graphics_window_location for documentation.

setMinimalRadius(double) - Method in interface nxopen.tooling.BlendCurve3DBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING")
.

setMinimizeNumberOfEngages(boolean) - Method in interface nxopen.cam.MillCutParameters

License requirements: cam_base ("CAM BASE")
.

setMinImprovement(double) - Method in interface nxopen.cae.ModelUpdateOptimOptionsBuilder

License requirements: nx_correl_update ("FE Model Update")
.

setMinimum(double) - Method in interface nxopen.cam.ContourAngle

License requirements: cam_base ("CAM BASE")
.

setMinimumAngle(double) - Method in interface nxopen.cam.Cutcom

License requirements: cam_base ("CAM BASE")
.

setMinimumAngle(double) - Method in interface nxopen.cam.NCAssistantBuilder

License requirements: cam_base ("CAM BASE")
.

setMinimumAngleFoldedFacets(double) - Method in interface nxopen.facet.ConvertFacetBodyBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setMinimumAngleFoldedFacets(double) - Method in interface nxopen.facet.STLImportBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setMinimumArcToleranceInFlatSolid(boolean, double) - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign

Sets the minimum arc tolerance during Flat Solid simplification
License requirements: nx_flexible_pcb ("NX Flexible PCB")
.

setMinimumArcToleranceInFlatSolid(boolean, double) - Method in interface nxopen.preferences.PartSheetmetal

SETS the minimum arc tolerance during Flat Solid simplification
License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setMinimumArea(RoughFinishTurningBuilder.MinimumAreaTypes) - Method in interface nxopen.cam.RoughFinishTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setMinimumArea(double) - Method in interface nxopen.facet.DecimateFacetBodyBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setMinimumAreaSize(double) - Method in interface nxopen.cam.RoughFinishTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setMinimumAreaUnit(RoughFinishTurningBuilder.MinmaxAreaUnits) - Method in interface nxopen.cam.RoughFinishTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setMinimumAverage(double) - Method in interface nxopen.cam.StepoverBuilder

License requirements: cam_base ("CAM BASE")
.

setMinimumBorderLength(double) - Method in interface nxopen.facet.FeatureExtractionBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setMinimumCavityDepth(String) - Method in interface nxopen.die.RotorSectionBuilder

License requirements: ug_die_design ("Die Design")
.

setMinimumCheckingMethod(SplinePathBuilder.SplinePathAttributeOptions) - Method in interface nxopen.routing.SplinePathBuilder

License requirements: routing_base ("Routing Basic")
.

setMinimumClearance(NcmPlanarEngRetBuilder.MinClearanceTypes) - Method in interface nxopen.cam.NcmPlanarEngRetBuilder

License requirements: cam_base ("CAM BASE")
.

setMinimumClosedAngle(WeldAdvisorCustomerDefault, double) - Method in interface nxopen.weld.WeldAdvisorBuilder

The weld advisor parameter Minimum Closed Angle
License requirements: ugweld ("UG WELD")
.

setMinimumComponentsForLargeAssemblyOption(int) - Method in interface nxopen.preferences.PartDrafting

License requirements: None.

setMinimumDegree(int) - Method in interface nxopen.geometricutilities.CurveFitData

License requirements: None.

setMinimumDistance(double) - Method in interface nxopen.tooling.BlankNestingBuilder

License requirements: None.

setMinimumDistanceToGeometry(double) - Method in interface nxopen.drafting.AutomationPreferencesBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setMinimumEdgeDistance(WeldAdvisorCustomerDefault, double) - Method in interface nxopen.weld.WeldAdvisorBuilder

The weld advisor parameter Minimum Edge Distance
License requirements: ugweld ("UG WELD")
.

setMinimumEdgeDistanceWithSealer(WeldAdvisorCustomerDefault, double) - Method in interface nxopen.weld.WeldAdvisorBuilder

The weld advisor parameter Minimum Edge Distance With Sealer
License requirements: ugweld ("UG WELD")
.

setMinimumEdgeLength(double) - Method in interface nxopen.features.AestheticFaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setMinimumElementSize(double) - Method in interface nxopen.tooling.LsdynaKfileGeneratorBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setMinimumExtensionLength(String) - Method in interface nxopen.die.RotorSectionBuilder

License requirements: ug_die_design ("Die Design")
.

setMinimumFacetNumber(int) - Method in interface nxopen.facet.STLImportBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setMinimumFlangeWidth(double) - Method in interface nxopen.weld.AutoPointBuilder

License requirements: ugweld ("UG WELD")
.

setMinimumFlangeWidth(double) - Method in interface nxopen.weld.EasyPatternBuilder

License requirements: ugweld ("UG WELD")
.

setMinimumGapBetweenAnnotations(double) - Method in interface nxopen.drafting.AutomationRuleBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setMinimumGapToGeometry(double) - Method in interface nxopen.drafting.AutomationRuleBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setMinimumGValue(double) - Method in interface nxopen.cae.responsesimulation.RSEventAttributes

License requirements: nx_response_anlys ("NX Response Analysis")
.

setMinimumHeelClearanceDistance(double) - Method in interface nxopen.cam.ToolAxisVariable

License requirements: cam_base ("CAM BASE")
.

setMinimumHeight(int) - Method in interface nxopen.blockstyler.ListBox

License requirements: None.

setMinimumHeight(int) - Method in interface nxopen.blockstyler.MultilineString

License requirements: None.

setMinimumHeight(int) - Method in interface nxopen.blockstyler.SetList

License requirements: None.

setMinimumHeight(int) - Method in interface nxopen.blockstyler.Tree

License requirements: None.

setMinimumLabelEnabled(boolean) - Method in interface nxopen.geometricutilities.CombOptionsBuilder

License requirements: None.

setMinimumLeadAngle(double) - Method in interface nxopen.cam.InterpolateVector

License requirements: cam_base ("CAM BASE")
.

setMinimumLeadAngle(double) - Method in interface nxopen.cam.ToolAxisAdvanced

License requirements: cam_base ("CAM BASE")
.

setMinimumLeadAngle(double) - Method in interface nxopen.cam.ToolAxisVariable

License requirements: cam_base ("CAM BASE")
.

setMinimumLevel(double) - Method in interface nxopen.cam.NCAssistantBuilder

License requirements: cam_base ("CAM BASE")
.

setMinimumNumberOfPoints(int) - Method in interface nxopen.cam.InspectionCurveFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setMinimumPathLength(double) - Method in interface nxopen.routing.electrical.Connection

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setMinimumPitch(double) - Method in interface nxopen.drawings.CustomViewSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setMinimumPitchField(double) - Method in interface nxopen.drawings.ThreadsViewStyle

Sets the minimum pitch field.

setMinimumPitchField(double) - Method in interface nxopen.preferences.ThreadsViewPreferences

Sets the minimum pitch field.

setMinimumPitchFieldData(double) - Method in interface nxopen.drawings.ViewStyleThreadsBuilder

License requirements: drafting ("DRAFTING")
.

setMinimumPointDistance(WeldAdvisorCustomerDefault, double) - Method in interface nxopen.weld.WeldAdvisorBuilder

The weld advisor parameter Minimum Spacing
License requirements: ugweld ("UG WELD")
.

setMinimumRadius(double) - Method in interface nxopen.cam.NCAssistantBuilder

License requirements: cam_base ("CAM BASE")
.

setMinimumRadius(boolean) - Method in interface nxopen.features.AestheticFaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setMinimumRadiusOption(BridgeCurveBuilder.MinRadiusTypes) - Method in interface nxopen.features.BridgeCurveBuilder

Deprecated.

Deprecated in NX8.5.0. Use BridgeCurveBuilderEx instead.

setMinimumRibHeight(double) - Method in interface nxopen.die.KeywayChildBuilder

Sets the minimum rib height of the keyway.

setMinimumRibHeight(double) - Method in interface nxopen.die.KeywayParentBuilder

Sets the minimum rib height of keyways.

setMinimumSizeMode(RoughFinishTurningBuilder.MinmaxSizeModes) - Method in interface nxopen.cam.RoughFinishTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setMinimumSmallEdgeLength(double) - Method in interface nxopen.preferences.SessionNXGateway

Sets the minimum small edge length.

setMinimumSpaceSize(boolean) - Method in interface nxopen.tooling.BlankLayoutBuilder

License requirements: None.

setMinimumSpaceSizeValue(String) - Method in interface nxopen.tooling.BlankLayoutBuilder

License requirements: None.

setMinimumSpacing(double) - Method in interface nxopen.cam.InspectionCurveFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setMinimumSpacingBetweenPoints(double) - Method in interface nxopen.weld.AutoPointBuilder

License requirements: ugweld ("UG WELD")
.

setMinimumSubtendedAngle(boolean) - Method in interface nxopen.features.AestheticFaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setMinimumSubtendedAngle(double) - Method in interface nxopen.features.AestheticFaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setMinimumTiltAngle(double) - Method in interface nxopen.cam.ToolAxisVariable

License requirements: cam_base ("CAM BASE")
.

setMinimumToolClearance(boolean, String) - Method in interface nxopen.preferences.PartSheetmetal

Sets minimum tool clearance expression
License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setMinimumValue(double) - Method in interface nxopen.blockstyler.AngularDimension

License requirements: None.

setMinimumValue(double) - Method in interface nxopen.blockstyler.DoubleBlock

License requirements: None.

setMinimumValue(double) - Method in interface nxopen.blockstyler.ExpressionBlock

License requirements: None.

setMinimumValue(int) - Method in interface nxopen.blockstyler.IntegerBlock

License requirements: None.

setMinimumValue(double) - Method in interface nxopen.blockstyler.LinearDimension

License requirements: None.

setMinimumValue(double) - Method in interface nxopen.blockstyler.OnPathDimension

License requirements: None.

setMinimumValue(double) - Method in interface nxopen.blockstyler.RadiusDimension

License requirements: None.

setMinimumValue(int) - Method in interface nxopen.report.IntegerArgument

License requirements: None.

setMinimumValues(int, int, double[]) - Method in interface nxopen.blockstyler.DoubleTable

Sets the MinimumValues
License requirements: None.

setMinimumValues(int, int, int[]) - Method in interface nxopen.blockstyler.IntegerTable

Sets the MinimumValues
License requirements: None.

setMinimumWebLength(boolean, String) - Method in interface nxopen.preferences.PartSheetmetal

Sets minimum Web Length expression
License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setMinInclusive(boolean) - Method in interface nxopen.blockstyler.AngularDimension

License requirements: None.

setMinInclusive(boolean) - Method in interface nxopen.blockstyler.DoubleBlock

License requirements: None.

setMinInclusive(boolean) - Method in interface nxopen.blockstyler.ExpressionBlock

License requirements: None.

setMinInclusive(boolean) - Method in interface nxopen.blockstyler.IntegerBlock

License requirements: None.

setMinInclusive(boolean) - Method in interface nxopen.blockstyler.LinearDimension

License requirements: None.

setMinInclusive(boolean) - Method in interface nxopen.blockstyler.OnPathDimension

License requirements: None.

setMinInclusive(boolean) - Method in interface nxopen.blockstyler.RadiusDimension

License requirements: None.

setMinInteger(int) - Method in interface nxopen.AttributeTemplatesBuilder

License requirements: None.

setMinLabel(int) - Method in interface nxopen.cae.LaminateRelabelPliesBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setMinMaxOption(DeviationGaugeBuilder.MinMaxType) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setMinMeanRange(double) - Method in interface nxopen.cae.DurabilityDamageEvaluationBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setMinNumber(double) - Method in interface nxopen.AttributeTemplatesBuilder

License requirements: None.

setMinorDiameter(double) - Method in interface nxopen.cam.HoleBossSet

License requirements: cam_base ("CAM BASE")
.

setMinorLinesPerMajor(int) - Method in interface nxopen.display.GridBuilder

License requirements: None.

setMinorLineStyle(GridBuilder.LineStyleType) - Method in interface nxopen.display.GridBuilder

License requirements: None.

setMinorLineWeight(GridBuilder.LineWeightType) - Method in interface nxopen.display.GridBuilder

License requirements: None.

setMinorPoint(Point) - Method in interface nxopen.SketchEllipseBuilder

License requirements: None.

setMinorRadius(double) - Method in interface nxopen.cam.InspectionTorusFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setMinRad(double) - Method in interface nxopen.tooling.ScrapDesignBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setMinRadius(double) - Method in interface nxopen.blockstyler.AngularDimension

License requirements: None.

setMinSimulationTime(double) - Method in interface nxopen.cam.SimulationOptionsBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setMinSpacing(double) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setMinString(String) - Method in interface nxopen.AttributeTemplatesBuilder

License requirements: None.

setMinTiltAngle(double) - Method in interface nxopen.cam.ToolPathTiltMachine

License requirements: None.

setMinToggle(boolean) - Method in interface nxopen.cam.InspectionCmmCommandBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setMinValue(double) - Method in interface nxopen.cam.InspectionCmmCommandBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setMirror(boolean) - Method in interface nxopen.features.shipdesign.ManufacturingPreparationBuilder

License requirements: None.

setMirrorBodyBuilder(MirrorBodyBuilder) - Method in interface nxopen.features.WaveLinkBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setMirrorByType(boolean) - Method in interface nxopen.weld.WeldPointBuilder

Sets the mirror by type
License requirements: ugweld ("UG WELD")
.

setMirrorCrossSection(boolean) - Method in interface nxopen.mechanicalrouting.StockBuilder

Sets the mirror cross section value.

setMirrorCsysMethod(LinkedMirrorPartBuilder.MirrorCsysOption) - Method in interface nxopen.LinkedMirrorPartBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setMirrorFaces(boolean) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

Deprecated.

Deprecated in NX9.0.0. This API is no longer used.

setMirrorOrientation(MirrorCertificationBuilder.MirrorOrientationType) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setMirrorOrientationOption(PatternOrientation.Enum) - Method in interface nxopen.geometricutilities.PatternOrientation

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setMirrorPartName(String) - Method in interface nxopen.LinkedMirrorPartBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setMirrorPartType(LinkedMirrorPartBuilder.MirrorPartTypeOption) - Method in interface nxopen.LinkedMirrorPartBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setMirrorPartType(Part, LinkedMirrorPartBuilder.MirrorPartTypeOption) - Method in interface nxopen.PartCollection

Set the type of linked mirrored part
License requirements: solid_modeling ("SOLIDS MODELING")
.

setMirrorPlane(Plane) - Method in interface nxopen.die.AddendumSectionBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setMirrorPlane(ISurface) - Method in interface nxopen.die.FillBuilder

Sets the plane to mirror the area fill about
License requirements: die_engineering ("DIE ENGINEERING")
.

setMirrorPlane(Plane) - Method in interface nxopen.features.GeomcopyBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setMirrorPlane(Plane) - Method in interface nxopen.features.shipdesign.MirrorShipStructureBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setMirrorPlane(Plane) - Method in interface nxopen.features.subdivision.MirrorCageBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setMirrorPlane(Plane) - Method in interface nxopen.LinkedMirrorPartBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setMirrorPlane(Plane) - Method in interface nxopen.weld.DatumSurfaceBuilder

License requirements: ugweld ("UG WELD")
.

setMirrorPlane(Plane) - Method in interface nxopen.weld.WeldPointBuilder

Sets the plane that a point is to be mirrored about.

setMirrorPlaneNormal(Vector3d) - Method in interface nxopen.LinkedMirrorPartBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setMirrorPlaneOption(MirrorFaceBuilder.MirrorPlaneOptions) - Method in interface nxopen.features.MirrorFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setMirrorPlaneOrigin(Point3d) - Method in interface nxopen.LinkedMirrorPartBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setMirrorPmiFlag(boolean) - Method in interface nxopen.LinkedMirrorPartBuilder

License requirements: None.

setMirrorProcedureOptions(StartSymmetricModelingBuilder.MirrorProcedureOption) - Method in interface nxopen.features.subdivision.StartSymmetricModelingBuilder

Deprecated.

Deprecated in NX10.0.0. This property is redundent and hence not necessary.

setMirrorProfile(boolean) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setMirrorRotationPoint(Point) - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setMirrorTranslateReferenceObjects(TaggedObject[]) - Method in interface nxopen.weld.WeldPointBuilder

Add or remove mirror translate reference objects
License requirements: ugweld ("UG WELD")
.

setMirrorType(MirrorCertificationBuilder.MirrorSurfaceType) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setMisalignedMode(ProfileTransitionBuilder.MisalignedModeType) - Method in interface nxopen.features.shipdesign.ProfileTransitionBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setMismatchBehavior(TypedConnectorFeatureBuilder.BehaviorOnMismatch) - Method in interface nxopen.linedesigner.TypedConnectorFeatureBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setMiterCorner(boolean) - Method in interface nxopen.features.sheetmetal.ClosedCornerBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setMiterCorner(boolean) - Method in interface nxopen.features.sheetmetal.MiterOptions

License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setMiterCorner(boolean) - Method in interface nxopen.features.sheetmetal.ThreeBendCornerBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setMiterInteriorCornersIfNecessary(boolean) - Method in interface nxopen.features.sheetmetal.MiterOptions

Sets the miter_corners option.If set to true, it miter bend edges that are larger than default bend radius.

setMiterOption(LawExtensionBuilderEx.MiterOptions) - Method in interface nxopen.features.LawExtensionBuilderEx

License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING")
.

setMixedMesh(boolean) - Method in interface nxopen.cae.optimization.TBSSmoothBuilder

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setMmc(MeshMate) - Method in interface nxopen.cae.MMCCreateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setMode(AutomaticTraceline.ModeOption) - Method in interface nxopen.AutomaticTraceline

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setMode(BoundaryTurnMemberOffset.ModeType) - Method in interface nxopen.cam.BoundaryTurnMemberOffset

License requirements: cam_base ("CAM BASE")
.

setMode(DriveMode.Type) - Method in interface nxopen.cam.DriveMode

License requirements: None.

setMode(InitialProfilePlunge.Modes) - Method in interface nxopen.cam.InitialProfilePlunge

License requirements: cam_base ("CAM BASE")
.

setMode(LowerLimit.ModeTypes) - Method in interface nxopen.cam.LowerLimit

License requirements: cam_base ("CAM BASE")
.

setMode(ReliefCut.Modes) - Method in interface nxopen.cam.ReliefCut

License requirements: cam_base ("CAM BASE")
.

setMode(TurnRoughFinishLocalReturnBuilder.ModeTypes) - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder

License requirements: cam_base ("CAM BASE")
.

setMode(AddRemoveBoxViewBuilder.ModeType) - Method in interface nxopen.drawings.AddRemoveBoxViewBuilder

License requirements: None.

setMode() - Method in interface nxopen.features.shipdesign.SetModeBuilder

Loops through all the parts and sets mode to design or manufacturing
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setMode(SubdivisionProjectCageBuilder.ModeOptions) - Method in interface nxopen.features.subdivision.SubdivisionProjectCageBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setMode(PlayMode) - Method in interface nxopen.motion.AnimationControl

Sets the animation mode
License requirements: mechanisms ("MECHANISMS")
.

setMode(int) - Method in interface nxopen.motion.GraphBuilder

Deprecated.

Deprecated in NX11.0.0. Use Motion.GraphObjectBuilder instead.

SetModeBuilder - Interface in nxopen.features.shipdesign

This class is used to set the mode to design or manufacturing.

SetModeBuilder.DesMfgMode - Class in nxopen.features.shipdesign

Manufacturing Mode type.

setModelBasedAlwaysStart(GeneralWorkFlowBuilder.ModelBasedAlwaysStartType) - Method in interface nxopen.drawings.GeneralWorkFlowBuilder

License requirements: drafting ("DRAFTING")
.

setModelBasedInsertSheet(boolean) - Method in interface nxopen.drawings.GeneralWorkFlowBuilder

License requirements: drafting ("DRAFTING")
.

setModelBasedProjectedView(boolean) - Method in interface nxopen.drawings.GeneralWorkFlowBuilder

License requirements: drafting ("DRAFTING")
.

setModelBounds(Tag, double[]) - Method in interface nxopen.uf.UFDisp

Refer to UF_DISP_set_model_bounds for documentation.

setModelCheck(boolean) - Method in interface nxopen.cae.DurabilityEventSolverBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setModelCheck(boolean) - Method in interface nxopen.cae.DurabilitySolverBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setModelDepthType(HoleMakingBuilder.ModelDepthTypes) - Method in interface nxopen.cam.HoleMakingBuilder

License requirements: cam_base ("CAM BASE")
.

setModeled(boolean) - Method in interface nxopen.routing.TerminalPortBuilder

License requirements: routing_harness ("Routing Harness")
.

setModelElementRevision(ModelElementRevision) - Method in interface nxopen.mechanicalrouting.ManageInlineBehaviorBuilder

Sets ModelElementRevision of Routing Reuse type.

setModelFile(String) - Method in interface nxopen.features.shipdesign.QualifySketchBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setModelFile(String) - Method in interface nxopen.motion.MechatronicsBuilder

License requirements: mechanisms ("MECHANISMS")
.

setModelingObjects(ModelingObjectPropertyTable[]) - Method in interface nxopen.cae.ImportSimulationBuilder

Set modeling objects to import
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setModelingSketchCircles(boolean) - Method in interface nxopen.annotations.HoleTableSettingsHoleFiltersBuilder

License requirements: drafting ("DRAFTING")
.

setModelingTolerance(double) - Method in interface nxopen.weld.DatumCommonBuilder

License requirements: ugweld ("UG WELD")
.

setModelName(String) - Method in interface nxopen.mechatronics.MATLABSignalConnectionBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setModelPath(String) - Method in interface nxopen.features.shipdesign.QualifySketchBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setModelReferencePoint1(Point) - Method in interface nxopen.display.ImageBaseBuilder

License requirements: None.

setModelReferencePoint2(Point) - Method in interface nxopen.display.ImageBaseBuilder

License requirements: None.

setModelReferencePoint3(Point) - Method in interface nxopen.display.ImageBaseBuilder

License requirements: None.

setModelScaleFactor(double) - Method in interface nxopen.DxfdwgImporter

License requirements: None.

setModelSelectionType(ResultProbeBuilder.SelectionType) - Method in interface nxopen.cae.ResultProbeBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setModelType(String) - Method in interface nxopen.pdm.PartOperationCreateBuilder

Sets the selected Model Type This is same as the Relation Type that is set by FileNew.relationType() and is same as the relation type specified in Template PAX files.

setModelTypeSelection(TirePropertyCdBuilder.ModelType) - Method in interface nxopen.motion.TirePropertyCdBuilder

License requirements: mechanisms ("MECHANISMS")
.

setModelViewCreation(PreviewPropertiesBuilder.ModelViewCreationOptions) - Method in interface nxopen.PreviewPropertiesBuilder

License requirements: None.

setModelViewName(String) - Method in interface nxopen.annotations.SearchModelViewBuilder

License requirements: None.

setModelViewToUse(AssemblyDrawingBuilder.ModelViewToUseValue) - Method in interface nxopen.tooling.AssemblyDrawingBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setModeNumber(int) - Method in interface nxopen.cae.optimization.DAOConstraintBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setModeNumber(int) - Method in interface nxopen.cae.optimization.DAOObjective

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setModeNumber(int) - Method in interface nxopen.cae.optimization.TBSEigenvalueOptimizationParameters

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setModeRequest(GraphBuilder.RequestChoices) - Method in interface nxopen.motion.GraphBuilder

Deprecated.

Deprecated in NX11.0.0. Use Motion.GraphObjectBuilder instead.

setModeSelection(PocketBuilder.ModeType) - Method in interface nxopen.tooling.PocketBuilder

License requirements: None.

setModeShapes(double) - Method in interface nxopen.cae.ModelUpdateOverallWeightsBuilder

License requirements: nx_correl_update ("FE Model Update")
.

setModeShapeTargetActive(int, boolean) - Method in interface nxopen.cae.ModelUpdateSolution

Sets active status for a specific mode shape target
License requirements: nx_correl_update ("FE Model Update")
.

setModeShapeTargetWeight(int, double) - Method in interface nxopen.cae.ModelUpdateSolution

Sets weight for a specific mode shape target
License requirements: nx_correl_update ("FE Model Update")
.

setModeToggle(boolean) - Method in interface nxopen.display.TrueStudioBuilder

License requirements: None.

setModeType(PackagingInterferenceBuilder.Mode) - Method in interface nxopen.motion.PackagingInterferenceBuilder

Sets the PackagingInterference mode type defined at PackagingInterferenceBuilder.Mode
License requirements: mechanisms ("MECHANISMS")

Created in NX4.0.0

setModifiableGeometryOption(PartModuleInputBuilder.ModifiableGeometryOptions) - Method in interface nxopen.geometricutilities.PartModuleInputBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setModificationPercent(int) - Method in interface nxopen.features.RefitFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setModificationPercentage(int) - Method in interface nxopen.features.PoleSmoothingBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setModificationPercentage(int) - Method in interface nxopen.features.SmoothSplineBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setModified(boolean) - Method in interface nxopen.mechatronics.FunctionObjectBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setModified(boolean) - Method in interface nxopen.mechatronics.LogicObjectBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setModifiedSketch(Sketch) - Method in interface nxopen.features.shipdesign.PenetrationAssociationBuilder

License requirements: nx_penetration_mgmt ("Penetration Management")
.

setModifiedSketch(Sketch) - Method in interface nxopen.features.shipdesign.PenetrationCutoutBuilder

License requirements: nx_penetration_mgmt ("Penetration Management")
.

setModifiedSketch(Sketch) - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder

License requirements: nx_penetration_mgmt ("Penetration Management")
.

setModifyInputSheet(boolean) - Method in interface nxopen.die.CompensateRoughDataBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setModifyInputSheet(boolean) - Method in interface nxopen.features.GlobalShapingBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setModifyMethod(GlobalShapingBuilder.ModifyMethodType) - Method in interface nxopen.features.GlobalShapingBuilder

License requirements: None.

setModifyPercent(int) - Method in interface nxopen.facet.SmoothFacetBodyBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setModlData(Tag, int, UFGdt.ModlData[]) - Method in interface nxopen.uf.UFGdt

Refer to UF_GDT_set_modl_data for documentation.

setMoldbaseStyle(MotionSimulationBuilder.MoldbaseStyleType) - Method in interface nxopen.tooling.MotionSimulationBuilder

License requirements: None.

setMoldFacePlane(Plane) - Method in interface nxopen.features.shipdesign.DeckBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setMoldFacePlane(Plane) - Method in interface nxopen.features.shipdesign.LongitudinalBulkheadBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setMoldOpenAngle(double) - Method in interface nxopen.tooling.MotionSimulationBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setMomentColor(NXColor) - Method in interface nxopen.cae.FreeBodyResultsBuilder

Moment Color
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setMomentVectorDisplay(FreeBodyResultsBuilder.VectorDisplay) - Method in interface nxopen.cae.FreeBodyResultsBuilder

Moment vector display
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setMonochromeBackgroundColor(int) - Method in interface nxopen.preferences.PartVisualizationColorSetting

Sets the monochrome background color
License requirements: None.

setMonochromeDisplay(boolean) - Method in interface nxopen.linedesigner.ExportToDWGBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setMonochromeDisplay(boolean) - Method in interface nxopen.preferences.PartVisualizationColorSetting

Sets the monochrome display flag.

setMonochromeForegroundColor(int) - Method in interface nxopen.preferences.PartVisualizationColorSetting

Sets the monochrome foreground color.

setMonochromePreselectionColor(int) - Method in interface nxopen.preferences.PartVisualizationColorSetting

Sets the monochrome color for preselected objects
License requirements: None.

setMonochromeSelectionColor(int) - Method in interface nxopen.preferences.PartVisualizationColorSetting

Sets the monochrome selection_color.

setMonth(DateItemBuilder.MonthOfYear) - Method in interface nxopen.DateItemBuilder

License requirements: None.

setMoreDetails(String[]) - Method in interface nxopen.die.DrawBeadBuilder

Set the detailed description strings of the draw bead.

setMoreSummaryDetails(boolean) - Method in interface nxopen.VRMLImporter

Sets the More Summary Details flag.

setMorphingFlag(boolean) - Method in interface nxopen.cae.FemCreationOptions

Set the morphing enabled flag
License requirements: None.

setMotion(TireEnvelopeBuilder.MotionMethod) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setMotionDistance(double) - Method in interface nxopen.tooling.DefineCamBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setMotionEnd(LaserLinearMove.MotionEnds) - Method in interface nxopen.cam.LaserLinearMove

License requirements: cam_base ("CAM BASE")
.

setMotionEndType(CircularAboutAxisMoveBuilder.EndType) - Method in interface nxopen.cam.CircularAboutAxisMoveBuilder

License requirements: None.

setMotionMethod(ToolPathEditorBuilder.MotionMethodType) - Method in interface nxopen.cam.ToolPathEditorBuilder

License requirements: None.

setMotionName(String) - Method in interface nxopen.tooling.UserDefinedMotionBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setMotionObjects(NXObject[]) - Method in interface nxopen.motion.GraphBuilder

Deprecated.

Deprecated in NX11.0.0. Use Motion.GraphObjectBuilder instead.

setMotionOutput(Cycle.MotionOutputTypes) - Method in interface nxopen.cam.Cycle

License requirements: cam_base ("CAM BASE")
.

setMotionOutput(TurningOperationBuilder.MotionOutputOptions) - Method in interface nxopen.cam.TurningOperationBuilder

License requirements: cam_base ("CAM BASE")
.

setMotionProfile(MotionProfile) - Method in interface nxopen.mechatronics.CamBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setMotionProfile(MotionProfile) - Method in interface nxopen.mechatronics.GraphControlBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setMotionSimFile(Part) - Method in interface nxopen.cae.SimMotionLoadsBuilder

Sets the motion simulation part file
License requirements: None.

setMotionToTwoDimensions(Plane) - Method in interface nxopen.geometricutilities.ModlMotion

Set motion to two dimensions along the given plane
License requirements: None.

setMotionType(AcrossVoids.MotionTypes) - Method in interface nxopen.cam.AcrossVoids

License requirements: None.

setMotionType(MoveBuilder.Motion) - Method in interface nxopen.cam.InspectionMoveBuilder

License requirements: None.

setMotionType(InspectionOperationTransformBuilder.Motion) - Method in interface nxopen.cam.InspectionOperationTransformBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setMotionType(MoveBuilder.Motion) - Method in interface nxopen.cam.MoveBuilder

License requirements: None.

setMotionType(OperationTransformBuilder.Motion) - Method in interface nxopen.cam.OperationTransformBuilder

License requirements: cam_base ("CAM BASE")
.

setMotionType(CamPathMotionType) - Method in interface nxopen.cam.PathLinearMotion

License requirements: cam_base ("CAM BASE")
.

setMotionType(TransportSurfaceBuilder.MoveType) - Method in interface nxopen.mechatronics.TransportSurfaceBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setMotionType(UserDefinedMotionBuilder.MotionTypes) - Method in interface nxopen.tooling.UserDefinedMotionBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setMotor(PMDCMotor) - Method in interface nxopen.motion.DriverOperation

License requirements: mechanisms ("MECHANISMS")
.

setMotorType(PMDCMotorBuilder.Type) - Method in interface nxopen.motion.PMDCMotorBuilder

Sets the motor type
License requirements: nx_motion_motor ("NX Motion Motor")
.

setMountingMethod(StiffenerSystemBuilder.MountingMethods) - Method in interface nxopen.features.shipdesign.EditStockBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setMountingMethod(StiffenerBuilder.MountingMethods) - Method in interface nxopen.features.shipdesign.StiffenerBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setMountingMethod(StiffenerSystemBuilder.MountingMethods) - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setMountingMethod(StiffenerSystemBuilder.MountingMethods) - Method in interface nxopen.features.shipdesign.SubSystemBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setMountingPosition(BoundaryTurnBlank.Position) - Method in interface nxopen.cam.BoundaryTurnBlank

License requirements: cam_base ("CAM BASE")
.

setMountingType(DDAMExcitation.MountingType) - Method in interface nxopen.cae.responsesimulation.RSEventAttributes

License requirements: nx_response_anlys ("NX Response Analysis")
.

setMouseGestureType(SelPref.MouseGesture) - Method in interface nxopen.display.SelPref

License requirements: None.

setMovable(boolean) - Method in interface nxopen.annotations.DatumTargetBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setMove(boolean) - Method in interface nxopen.motion.MarkerToNodeData

License requirements: mechanisms ("MECHANISMS")
.

setMoveAllGates(boolean) - Method in interface nxopen.tooling.MoldFillingBuilder

License requirements: ug_mold_design ("UG MOLD")
.

setMoveAttachedFlag(boolean) - Method in interface nxopen.routing.EditBendAngleBuilder

Move all attached geometry as a rigid set.

setMoveContent(DrawingRegionBuilder.ContentToMove) - Method in interface nxopen.drawings.DrawingRegionBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setMoveCopyInstance(InspectionOperationTransformBuilder.Result) - Method in interface nxopen.cam.InspectionOperationTransformBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setMoveCopyInstance(OperationTransformBuilder.Result) - Method in interface nxopen.cam.OperationTransformBuilder

License requirements: cam_base ("CAM BASE")
.

setMoveDirection(FollowPartMoveBuilder.MoveDirectionTypes) - Method in interface nxopen.cam.FollowPartMoveBuilder

License requirements: cam_base ("CAM BASE")
.

setMoveDistance(double) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setMoveDistance(double) - Method in interface nxopen.tooling.UserDefinedMotionBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setMoveDumbGeometry(boolean) - Method in interface nxopen.positioning.ComponentPositioner

Sets the flag that enables the positioner to reposition dumb geometry.

setMoveEnd(VectorDistanceMoveBuilder.EndType) - Method in interface nxopen.cam.VectorDistanceMoveBuilder

License requirements: None.

setMoveHandle(boolean) - Method in interface nxopen.geometricutilities.ModlMotion

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setMoveMeasurementPoints(boolean) - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setMovementArbitraryPlane(Plane) - Method in interface nxopen.features.StudioXformBuilderEx

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setMovementArbitraryVector(Direction) - Method in interface nxopen.features.StudioXformBuilderEx

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setMovementDirection(EdgeSymmetryBuilder.MovementDirections) - Method in interface nxopen.features.EdgeSymmetryBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setMovementMethod(EdgeSymmetryBuilder.MovementMethods) - Method in interface nxopen.features.EdgeSymmetryBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setMovementMethod(PolylineBuilder.MovementMethodType) - Method in interface nxopen.features.PolylineBuilder

License requirements: features_modeling ("FEATURES MODELING")
.

setMovementMethod(StudioSplineBuilderEx.MovementMethodType) - Method in interface nxopen.features.StudioSplineBuilderEx

License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setMovementMethod(StudioXformBuilderEx.MovementMethodType) - Method in interface nxopen.features.StudioXformBuilderEx

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setMovementMethod(TransformCageData.MovementMethodType) - Method in interface nxopen.features.subdivision.TransformCageData

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setMovementMethod(CurveShapingBuilder.MovementMethodType) - Method in interface nxopen.geometricutilities.CurveShapingBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setMovementPlane(Plane) - Method in interface nxopen.features.PolylineBuilder

License requirements: features_modeling ("FEATURES MODELING")
.

setMovementPlane(Plane) - Method in interface nxopen.features.StudioSplineBuilderEx

License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setMovementPlane(Plane) - Method in interface nxopen.features.subdivision.TransformCageData

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setMovementPlane(Plane) - Method in interface nxopen.geometricutilities.CurveShapingBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setMovementVector(Direction) - Method in interface nxopen.features.PoleSmoothingBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setMovementVector(Direction) - Method in interface nxopen.features.PolylineBuilder

License requirements: features_modeling ("FEATURES MODELING")
.

setMovementVector(Direction) - Method in interface nxopen.features.StudioSplineBuilderEx

License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setMovementVector(Direction) - Method in interface nxopen.features.subdivision.TransformCageData

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setMovementVector(Direction) - Method in interface nxopen.geometricutilities.CurveShapingBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setMoveMethod(MovePoleBuilder.MoveMethodType) - Method in interface nxopen.geometricutilities.MovePoleBuilder

License requirements: None.

setMoveObjectResult(MoveObjectBuilder.MoveObjectResultOptions) - Method in interface nxopen.features.MoveObjectBuilder

License requirements: None.

setMoveObjectsState(boolean) - Method in interface nxopen.positioning.Network

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setMoveOnCommit(Matrix3x3, Vector3d) - Method in interface nxopen.drafting.CutCopyPasteBuilder

Set the final motion from the drop location.

setMoveOnCommit(Matrix3x3, Vector3d) - Method in interface nxopen.drafting.CutCopyPasteLeaderBuilder

Set the final motion from the drop location.

setMoveOnlySelectedPoles(boolean) - Method in interface nxopen.features.PoleSmoothingBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setMoveOption(AdmMoveFaceBuilder.MoveOptionType) - Method in interface nxopen.features.AdmMoveFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setMoveOptions(MoldFillingBuilder.MoveOption) - Method in interface nxopen.tooling.MoldFillingBuilder

License requirements: ug_mold_design ("UG MOLD")
.

setMoveOrCopyOption(TransformPathBuilder.TransformOption) - Method in interface nxopen.routing.TransformPathBuilder

Sets the operation to perform during the commit method.

setMoveParents(boolean) - Method in interface nxopen.features.MoveObjectBuilder

License requirements: None.

setMoveSharpEdge(boolean) - Method in interface nxopen.features.EdgeBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setMoveStartPoint(boolean) - Method in interface nxopen.cam.ToolPathEditorBuilder

License requirements: None.

setMoveType(InspectionCmmCommandBuilder.MoveTypes) - Method in interface nxopen.cam.InspectionCmmCommandBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setMoveType(LaserLinearMove.MoveTypes) - Method in interface nxopen.cam.LaserLinearMove

License requirements: cam_base ("CAM BASE")
.

setMoveType(NormalToToolAxisMoveBuilder.Orientation) - Method in interface nxopen.cam.NormalToToolAxisMoveBuilder

License requirements: None.

setMoveType(TeachmodeLinearMoveBuilder.MoveTypes) - Method in interface nxopen.cam.TeachmodeLinearMoveBuilder

License requirements: cam_base ("CAM BASE")
.

setMoveType(TurnThreadEngageRetractBuilder.MoveTypes) - Method in interface nxopen.cam.TurnThreadEngageRetractBuilder

License requirements: cam_base ("CAM BASE")
.

setMoveWithExtensionSegments(boolean) - Method in interface nxopen.routing.TransformPathBuilder

Sets a message stating whether or not to move the selected segments with extension segments.

setMovingDirection(Direction) - Method in interface nxopen.linedesigner.SingleElementConveyorBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setMovingFace(Face) - Method in interface nxopen.features.sheetmetal.MigratedPanelBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setMovingGroup(NXObject[]) - Method in interface nxopen.positioning.Network

Set the elements of the moving_group.

setMrshape(SimulationOptionsBuilder.ToolShapeMR) - Method in interface nxopen.cam.SimulationOptionsBuilder

License requirements: cam_base ("CAM BASE")
.

setMsetCsysMatrixOrigin(Matrix3x3, Point3d) - Method in interface nxopen.tooling.ElectrodeInitializationBuilder

Sets csys matrix and origin.

setMsetCsysOriginToFaceCenter() - Method in interface nxopen.tooling.ElectrodeInitializationBuilder

Sets MSET CSYS origin to center of the selected faces.

setMsetPart(TaggedObject) - Method in interface nxopen.tooling.ElectrodeBlankBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setMsType(PackagingMeasureBuilder.MeasureType) - Method in interface nxopen.motion.PackagingMeasureBuilder

Sets the Measure type defined at PackagingMeasureBuilder.MeasureType
License requirements: mechanisms ("MECHANISMS")

Created in NX4.0.0

setMtdUnits(UFVariant, UFSim.UnitType) - Method in interface nxopen.uf.UFSim

Refer to UF_SIM_set_mtd_units for documentation.

setMtype(MeasureDistanceBuilder.MeasureType) - Method in interface nxopen.MeasureDistanceBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setMuDynamic(double) - Method in interface nxopen.motion.JointFrictionAdams

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using Motion.JointFrictionAdams#muDynamicExpression to query or edit it.

setMuDynamic(double) - Method in interface nxopen.motion.JointFrictionRecurDyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using Motion.JointFrictionRecurDyn#muDynamicExpression to query or edit it.

setMultiCADAssembly(boolean) - Method in interface nxopen.drawings.ConversionProcessSettingsBuilder

License requirements: convert_to_pmi (" Convert To PMI"), drafting ("DRAFTING")
.

setMultiComponent() - Method in interface nxopen.ScCollector

Sets the true option on ScCollector for collection from multiple components.

setMultiComponent() - Method in interface nxopen.Section

Sets the true option on Section for collection from multiple components.

setMultilineString(String[]) - Method in interface nxopen.annotations.MasterSymbolListItemBuilder

Sets the multiple notes for the given Text Type
License requirements: drafting ("DRAFTING")
.

setMultilineStringComments(String[]) - Method in interface nxopen.features.shipdesign.PenetrationReviewRequestBuilder

Sets the multiline string comments
License requirements: nx_penetration_mgmt ("Penetration Management")
.

setMultiple(CGMBuilder.MultipleOption) - Method in interface nxopen.CGMBuilder

License requirements: None.

setMultipleCenterMarks(boolean) - Method in interface nxopen.annotations.BaseCenterMarkBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setMultipleComponents(boolean) - Method in interface nxopen.tooling.CopySolidBuilder

License requirements: ug_mold_design ("UG MOLD")
.

setMultipleEdit(boolean) - Method in interface nxopen.blockstyler.SetList

License requirements: None.

setMultipleFeatures(boolean) - Method in interface nxopen.features.FitSurfaceBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setMultipleMatches(SimBcXyPlotBuilder.ResolveMultipleMatches) - Method in interface nxopen.cae.SimBcXyPlotBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setMultipleStringValue(String[]) - Method in interface nxopen.annotations.PmiAttributeValueMultipleStringBuilder

Sets the multiple string
License requirements: None.

setMultiplier(double) - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setMultiPort(NXObject) - Method in interface nxopen.routing.ModelTerminalsBuilder

License requirements: routing_harness ("Routing Harness")
.

setMultiPositionBuilder(TaggedObject) - Method in interface nxopen.tooling.ElectrodeBlankBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setMuStatic(double) - Method in interface nxopen.motion.JointFrictionAdams

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using Motion.JointFrictionAdams#muStaticExpression to query or edit it.

setMuStatic(double) - Method in interface nxopen.motion.JointFrictionRecurDyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using Motion.JointFrictionRecurDyn#muStaticExpression to query or edit it.

setMValue(int) - Method in interface nxopen.cae.ElementSplitBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setMwLayoutType(LayoutBuilder.LayoutType) - Method in interface nxopen.tooling.LayoutBuilder

License requirements: None.

setName(String) - Method in interface nxopen.assemblies.productinterface.PropertyBuilder

License requirements: gateway ("UG GATEWAY")
.

setName(String) - Method in interface nxopen.cae.CaeGroup

CaeGroups the name of the group
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setName(String) - Method in interface nxopen.cae.CfdAutoRefinementConstraint

Sets the name of the automatic refinement constraint
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")
.

setName(String) - Method in interface nxopen.cae.CfdContactPreventionConstraint

Sets the name of the contact prevention constraint
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")
.

setName(String) - Method in interface nxopen.cae.CfdLocalResolutionConstraint

Sets the name of the local resolution constraint
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")
.

setName(String) - Method in interface nxopen.cae.CompanionResult

License requirements: nx_masterfem ("Finite Element Modeling")
.

setName(String) - Method in interface nxopen.cae.CompanionResultBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setName(String) - Method in interface nxopen.cae.connections.Folder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setName(String) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setName(String) - Method in interface nxopen.cae.DurabilityEventOverridesBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setName(String) - Method in interface nxopen.cae.DurabilityEventStrengthSettingsBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setName(String) - Method in interface nxopen.cae.DurabilityRandomFatigueBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setName(String) - Method in interface nxopen.cae.DurabilityStressAxesBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setName(String) - Method in interface nxopen.cae.FluidDomainRecipe

Sets the name of the fluid domain recipe
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")
.

setName(String) - Method in interface nxopen.cae.FunctionBuilder

License requirements: nx_ftk ("NX Advanced Graphing")
.

setName(String) - Method in interface nxopen.cae.LaminateDynamicSimBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setName(String) - Method in interface nxopen.cae.LaminateGlobalLayup

License requirements: nx_lam_composites ("Laminate Composites")
.

setName(String) - Method in interface nxopen.cae.LaminateGraphicalReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setName(String) - Method in interface nxopen.cae.LaminateLayupOffset

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setName(String) - Method in interface nxopen.cae.LaminateMatOrientation

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setName(String) - Method in interface nxopen.cae.LaminatePlyGroup

License requirements: nx_lam_composites ("Laminate Composites")
.

setName(String) - Method in interface nxopen.cae.LaminatePostReport

License requirements: nx_lam_composites ("Laminate Composites")
.

setName(String) - Method in interface nxopen.cae.LaminatePostReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setName(String) - Method in interface nxopen.cae.LaminateQuickReportBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setName(String) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setName(String) - Method in interface nxopen.cae.LayoutStateBuilder

Sets the name of the layout state
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setName(String) - Method in interface nxopen.cae.optimization.DAODesignVariableBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setName(String) - Method in interface nxopen.cae.optimization.DAOSolution

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setName(String) - Method in interface nxopen.cae.optimization.DAOSolutionBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setName(String) - Method in interface nxopen.cae.optimization.NameDescription

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setName(String) - Method in interface nxopen.cae.PostAnnotation

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setName(String) - Method in interface nxopen.cae.PostAnnotationBuilder

Set the annotation name
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setName(String) - Method in interface nxopen.cae.PreTestExciterConfig

Deprecated.

Deprecated in NX8.5.0. Use PreTestExciterConfig.configName() instead.

setName(String) - Method in interface nxopen.cae.PreTestExciterConfigBuilder

License requirements: nx_correl_base ("FE Correlation")
.

setName(String) - Method in interface nxopen.cae.PreTestSensorConfig

License requirements: nx_correl_base ("FE Correlation")
.

setName(String) - Method in interface nxopen.cae.PreTestSensorConfigBuilder

License requirements: nx_correl_base ("FE Correlation")
.

setName(String) - Method in interface nxopen.cae.PreTestSolution

License requirements: nx_correl_base ("FE Correlation")
.

setName(String) - Method in interface nxopen.cae.PreTestSolutionBuilder

License requirements: nx_correl_base ("FE Correlation")
.

setName(String) - Method in interface nxopen.cae.PrimitiveMeshBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setName(String) - Method in interface nxopen.cae.responsesimulation.ObjectLabel

License requirements: nx_response_anlys ("NX Response Analysis")
.

setName(String) - Method in interface nxopen.cae.SimCondition

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setName(String) - Method in interface nxopen.cae.SimConstraintSetBuilder

License requirements: None.

setName(String) - Method in interface nxopen.cae.SimLoadRecipe

License requirements: nx_masterfem ("Finite Element Modeling")
.

setName(String) - Method in interface nxopen.cam.CAMFeature

License requirements: cam_base ("CAM BASE")
.

setName(String) - Method in interface nxopen.cam.CamGeneralPropertiesBuilder

Deprecated.

Deprecated in NX9.0.1. Use GeneralPropertiesBuilder instead.

setName(String) - Method in interface nxopen.cam.FeatureGeometryGroup

License requirements: cam_base ("CAM BASE")
.

setName(String) - Method in interface nxopen.cam.GeneralPropertiesBuilder

License requirements: None.

setName(String, boolean) - Method in interface nxopen.cam.GeometrySet

Set name
License requirements: cam_base ("CAM BASE")
.

setName(String) - Method in interface nxopen.cam.HoldingSystemBuilder

License requirements: cam_base ("CAM BASE")
.

setName(String) - Method in interface nxopen.cam.InspectionArcFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setName(String) - Method in interface nxopen.cam.InspectionCircleFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setName(String) - Method in interface nxopen.cam.InspectionConeFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setName(String) - Method in interface nxopen.cam.InspectionCparlnFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setName(String) - Method in interface nxopen.cam.InspectionCurveFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setName(String) - Method in interface nxopen.cam.InspectionCylinderFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setName(String) - Method in interface nxopen.cam.InspectionEdgePointFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setName(String) - Method in interface nxopen.cam.InspectionLineFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setName(String) - Method in interface nxopen.cam.InspectionParplnFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setName(String) - Method in interface nxopen.cam.InspectionPatternFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setName(String) - Method in interface nxopen.cam.InspectionPlaneFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setName(String) - Method in interface nxopen.cam.InspectionPointFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setName(String) - Method in interface nxopen.cam.InspectionSphereFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setName(String) - Method in interface nxopen.cam.InspectionSurfaceFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setName(String) - Method in interface nxopen.cam.InspectionTorusFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setName(String) - Method in interface nxopen.cam.ManualFeatureBuilder

License requirements: None.

setName(String) - Method in interface nxopen.CoordinateSystem

License requirements: None.

setName(String) - Method in interface nxopen.CustomWidth

License requirements: None.

setName(String) - Method in interface nxopen.display.DynamicSectionBuilder

Sets the section name.

setName(String) - Method in interface nxopen.drafting.DrawingCreationWizardBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setName(String) - Method in interface nxopen.drawings.DrawingRegionBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setName(String) - Method in interface nxopen.drawings.DrawingSheetBuilder

License requirements: drafting ("DRAFTING")
.

setName(String) - Method in interface nxopen.features.CustomAttribute

License requirements: solid_modeling ("SOLIDS MODELING")
.

setName(String) - Method in interface nxopen.features.HumanBuilder

Sets human name
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setName(String) - Method in interface nxopen.features.PartModuleBuilder

Deprecated.

Deprecated in NX9.0.0. Please use Features.PartModuleBuilder#name1 instead.

setName(String) - Method in interface nxopen.features.shipdesign.AnchorPoint

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setName(SteelDistributionBuilder.SaName) - Method in interface nxopen.features.shipdesign.SteelDistributionBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setName(String) - Method in interface nxopen.features.shipdesign.SubSystemBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setName(String) - Method in interface nxopen.features.vehicledesign.BaseDataLoadingBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setName(String) - Method in interface nxopen.features.vehicledesign.BaseDataWheelBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setName(String) - Method in interface nxopen.features.vehicledesign.PendulumPlacementBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setName(String) - Method in interface nxopen.HumanPosturePredictionBuilder

License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setName(String) - Method in interface nxopen.INXObject

Sets the custom name of the object.

setName(String) - Method in interface nxopen.layout2d.ComponentNameBuilder

License requirements: drafting ("DRAFTING")
.

setName(String) - Method in interface nxopen.linedesigner.CreateFactoryElementBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setName(String) - Method in interface nxopen.mechatronics.CamProfileBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setName(String) - Method in interface nxopen.mechatronics.CollisionBodyBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setName(String) - Method in interface nxopen.mechatronics.CollisionMaterialBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setName(String) - Method in interface nxopen.mechatronics.CollisionSensorBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setName(String) - Method in interface nxopen.mechatronics.DisplayChangerBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setName(String) - Method in interface nxopen.mechatronics.DistanceSensorBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setName(String) - Method in interface nxopen.mechatronics.ExpressionBlockBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setName(String) - Method in interface nxopen.mechatronics.ExternalConnectionBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setName(String) - Method in interface nxopen.mechatronics.MotionProfileBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setName(String) - Method in interface nxopen.mechatronics.ObjectSinkBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setName(String) - Method in interface nxopen.mechatronics.ObjectSourceBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setName(String) - Method in interface nxopen.mechatronics.PhysicsConstraintBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setName(String) - Method in interface nxopen.mechatronics.PhysicsJointBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setName(NXObject, String) - Method in interface nxopen.mechatronics.PhysicsManager

Physics to rename
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setName(String) - Method in interface nxopen.mechatronics.ReadWriteDeviceBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setName(String) - Method in interface nxopen.mechatronics.RigidBodyBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setName(String) - Method in interface nxopen.mechatronics.RuntimeBehaviorBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setName(String) - Method in interface nxopen.mechatronics.RuntimeNCBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setName(String) - Method in interface nxopen.mechatronics.SignalAdapterBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setName(String) - Method in interface nxopen.mechatronics.SignalBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setName(String) - Method in interface nxopen.mechatronics.SymbolTableBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setName(String) - Method in interface nxopen.mechatronics.TagFormBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setName(String) - Method in interface nxopen.mechatronics.TagTableBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setName(String) - Method in interface nxopen.mechatronics.TransportSurfaceBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setName(String) - Method in interface nxopen.motion.BodyContactBuilder

License requirements: mechanisms ("MECHANISMS")
.

setName(String) - Method in interface nxopen.motion.BushingDefine

License requirements: mechanisms ("MECHANISMS")
.

setName(String) - Method in interface nxopen.motion.ControlInputBuilder

License requirements: mechanisms ("MECHANISMS")
.

setName(String) - Method in interface nxopen.motion.ControlInputPortBuilder

License requirements: mechanisms ("MECHANISMS")
.

setName(String) - Method in interface nxopen.motion.ControlOutputBuilder

License requirements: mechanisms ("MECHANISMS")
.

setName(String) - Method in interface nxopen.motion.CouplerBuilder

Sets the name
License requirements: None.

setName(String) - Method in interface nxopen.motion.CurveOnCurveBuilder

License requirements: mechanisms ("MECHANISMS")
.

setName(String) - Method in interface nxopen.motion.DamperBuilder

License requirements: mechanisms ("MECHANISMS")
.

setName(String) - Method in interface nxopen.motion.FlexBodyBuilder

License requirements: mechanisms ("MECHANISMS")
.

setName(String) - Method in interface nxopen.motion.GeneralCouplerBuilder

License requirements: mechanisms ("MECHANISMS")
.

setName(String) - Method in interface nxopen.motion.JointDefine

Sets the joint name
License requirements: mechanisms ("MECHANISMS")
.

setName(String) - Method in interface nxopen.motion.JointDriverBuilder

License requirements: mechanisms ("MECHANISMS")
.

setName(String) - Method in interface nxopen.motion.LinkBuilder

License requirements: mechanisms ("MECHANISMS")
.

setName(String) - Method in interface nxopen.motion.LinkDriverBuilder

License requirements: mechanisms ("MECHANISMS")
.

setName(String) - Method in interface nxopen.motion.MarkerBuilder

License requirements: mechanisms ("MECHANISMS")
.

setName(String) - Method in interface nxopen.motion.MechatronicsBuilder

License requirements: mechanisms ("MECHANISMS")
.

setName(String) - Method in interface nxopen.motion.MotionSensorBuilder

License requirements: mechanisms ("MECHANISMS")
.

setName(String) - Method in interface nxopen.motion.MotionSolutionBuilder

License requirements: mechanisms ("MECHANISMS")
.

setName(String) - Method in interface nxopen.motion.PackagingBuilder

Sets the name of Packaging object.

setName(String) - Method in interface nxopen.motion.PlantInputBuilder

License requirements: nx_motion_cosim ("NX Motion CoSimulation")
.

setName(String) - Method in interface nxopen.motion.PlantOutputBuilder

License requirements: nx_motion_cosim ("NX Motion CoSimulation")
.

setName(String) - Method in interface nxopen.motion.PMDCMotorBuilder

Sets the name
License requirements: nx_motion_motor ("NX Motion Motor")
.

setName(String) - Method in interface nxopen.motion.PointOnCurveBuilder

License requirements: mechanisms ("MECHANISMS")
.

setName(String) - Method in interface nxopen.motion.PointOnSurfaceBuilder

License requirements: mechanisms ("MECHANISMS")
.

setName(String) - Method in interface nxopen.motion.PortAssociation

License requirements: mechanisms ("MECHANISMS")
.

setName(String) - Method in interface nxopen.motion.RoadBuilder

License requirements: mechanisms ("MECHANISMS")
.

setName(String) - Method in interface nxopen.motion.ScalarForceBuilder

License requirements: mechanisms ("MECHANISMS")
.

setName(String) - Method in interface nxopen.motion.ScalarTorqueBuilder

License requirements: mechanisms ("MECHANISMS")
.

setName(String) - Method in interface nxopen.motion.SegmentBuilder

License requirements: mechanisms ("MECHANISMS")
.

setName(String) - Method in interface nxopen.motion.SignalChartBuilder

Sets the name
License requirements: nx_motion_motor ("NX Motion Motor")
.

setName(String) - Method in interface nxopen.motion.SpringBuilder

License requirements: mechanisms ("MECHANISMS")
.

setName(String) - Method in interface nxopen.motion.TireBuilder

License requirements: mechanisms ("MECHANISMS")
.

setName(String) - Method in interface nxopen.motion.TirePropertyBasicParameters

License requirements: mechanisms ("MECHANISMS")
.

setName(String) - Method in interface nxopen.motion.TirePropertyCdBuilder

License requirements: mechanisms ("MECHANISMS")
.

setName(String) - Method in interface nxopen.motion.TirePropertyFtBuilder

License requirements: mechanisms ("MECHANISMS")
.

setName(String) - Method in interface nxopen.motion.TirePropertyNonInertialBuilder

License requirements: mechanisms ("MECHANISMS")
.

setName(String) - Method in interface nxopen.motion.TirePropertyTnoBuilder

License requirements: mechanisms ("MECHANISMS")
.

setName(String) - Method in interface nxopen.motion.VObject

License requirements: mechanisms ("MECHANISMS")
.

setName(String) - Method in interface nxopen.NavigatorFilter

Sets the name of NavigatorFilter
License requirements: None.

setName(String) - Method in interface nxopen.ObjectGeneralPropertiesBuilder

License requirements: None.

setName(String) - Method in interface nxopen.PhysicalMaterialBuilder

License requirements: None.

setName(String) - Method in interface nxopen.preferences.LoadDraftingStandardBuilder

License requirements: None.

setName(String) - Method in interface nxopen.report.CommandBuilder

License requirements: None.

setName(String) - Method in interface nxopen.routing.electrical.ElectricalFormat

Sets the name of ElectricalFormat
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Created in NX5.0.1

setName(String) - Method in interface nxopen.sim.KinematicAxisBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setName(String) - Method in interface nxopen.sim.KinematicChain

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setName(String) - Method in interface nxopen.sim.KinematicChannelBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setName(String) - Method in interface nxopen.sim.KinematicComponentBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder") OR resource_manager_nx ("Teamcenter Resource Manager")
.

setName(String) - Method in interface nxopen.sim.KinematicConfigurator

Sets the custom name of the kinematic model
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder") OR resource_manager_nx ("Teamcenter Resource Manager")
.

setName(String) - Method in interface nxopen.sim.KinematicJunctionBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder") OR resource_manager_nx ("Teamcenter Resource Manager")
.

setName(String) - Method in interface nxopen.sim.MachineKitBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setName(Tag, String) - Method in interface nxopen.uf.UFObj

Refer to UF_OBJ_set_name for documentation.

setName(String) - Method in interface nxopen.validate.RequirementBuilder

License requirements: None.

setName(String) - Method in interface nxopen.validate.ResultObject

Deprecated.

Deprecated in NX9.0.0. Use INXObject.name() and INXObject.setName(java.lang.String) instead.

setName1(String) - Method in interface nxopen.features.PartModuleBuilder

License requirements: usr_defined_features ("USER DEFINED FEATURES")
.

setNameCSYS(String) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setNameDisplay(boolean) - Method in interface nxopen.uf.UFMotion

Refer to UF_MOTION_set_name_display for documentation.

setNameDisplayFlag(boolean) - Method in interface nxopen.cae.CaeDOFSetDisplay

Sets the true/false flag based on whether the name of the DOF Set is displayed in the graphics window
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setNameDisplayFlag(boolean) - Method in interface nxopen.cae.SimBCDisplay

Sets the true/false flag based on whether the name of the BC is displayed in the graphics window
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setNameDisplayStatus(int) - Method in interface nxopen.uf.UFDisp

Refer to UF_DISP_set_name_display_status for documentation.

setNamedPropertyTableArrayPropertyValue(String, NamedPropertyTable[]) - Method in interface nxopen.cae.PropertyTable

Sets the referenced object array value of the property
License requirements: None.

setNamedPropertyTablePropertyValue(String, NamedPropertyTable) - Method in interface nxopen.cae.PropertyTable

Sets the referenced named property table object value of the property
License requirements: None.

setNamedRange(String, int, int, int, int, int) - Method in interface nxopen.Spreadsheet

Defines a name for the Range of cells.

setNamedReferenceType(String) - Method in interface nxopen.CGMBuilder

License requirements: None.

setNamedReferenceType(String) - Method in interface nxopen.PrintPDFBuilder

License requirements: None.

setNameFilter(String) - Method in interface nxopen.routing.StockBrowserBuilder

Sets the stock name filter which defines filter to name stock
License requirements: routing_base ("Routing Basic")
.

setNameLocation(Point3d) - Method in interface nxopen.DisplayableObject

Sets the location of the object's name.

setNameLocation(Point3d) - Method in interface nxopen.FeatureGeneralPropertiesBuilder

Sets the name location.

setNameLocation(Point3d) - Method in interface nxopen.ObjectGeneralPropertiesBuilder

Sets the name location.

setNameLocationSpecified(boolean) - Method in interface nxopen.FeatureGeneralPropertiesBuilder

License requirements: None.

setNameLocationSpecified(boolean) - Method in interface nxopen.ObjectGeneralPropertiesBuilder

License requirements: None.

setNameOrigin(Tag, double[]) - Method in interface nxopen.uf.UFObj

Refer to UF_OBJ_set_name_origin for documentation.

setNameOverride(boolean) - Method in interface nxopen.cae.LaminateImportedLayupBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setNamePrefix(String) - Method in interface nxopen.weld.SurfaceWeldBuilder

License requirements: structure_weld ("STRUCTURE WELD")
.

setNamePrefix(String) - Method in interface nxopen.weld.WeldJointBuilder

License requirements: structure_weld ("STRUCTURE WELD")
.

setNameRule(String) - Method in interface nxopen.tooling.EjectorTableBuilder

License requirements: ug_mold_design ("UG MOLD")
.

setNameRule(String) - Method in interface nxopen.tooling.EWDraftingBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setNameRule(UFClone.NameRuleDef, UFClone.NamingFailures) - Method in interface nxopen.uf.UFClone

Refer to UF_CLONE_set_name_rule for documentation.

setNameSeed(String) - Method in interface nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder

License requirements: nx_correl_update ("FE Model Update")
.

setNamespaces(String[]) - Method in interface nxopen.report.CommandBuilder

Sets the categories which command apply to.

setNameString(String) - Method in interface nxopen.cae.CfdAutoRefinementConstraintBuilder

License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")
.

setNameString(String) - Method in interface nxopen.cae.CfdContactPreventionConstraintBuilder

License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")
.

setNameString(String) - Method in interface nxopen.cae.CfdLocalResolutionConstraintBuilder

License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")
.

setNameString(String) - Method in interface nxopen.display.IrayPlusSimpleMaterialEditorBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setNameString(String) - Method in interface nxopen.linedesigner.InsertSheetBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setNameSuffix(String) - Method in interface nxopen.tooling.SetPressModelBuilder

License requirements: nx_dievalidation ("DIE VALIDATION")
.

setNameToFrom(boolean) - Method in interface nxopen.routing.SplitRunBuilder

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setNameUserSpecified(boolean) - Method in interface nxopen.visualreporting.GroupLabel

License requirements: nx_visual_reporting ("Visual Reporting")
.

setNameViewStatus(int) - Method in interface nxopen.uf.UFDisp

Refer to UF_DISP_set_name_view_status for documentation.

setNaming(String, UFClone.NamingTechnique, String) - Method in interface nxopen.uf.UFClone

Refer to UF_CLONE_set_naming for documentation.

setNamingRule(InterpartExpressionsBuilder.NamingRules) - Method in interface nxopen.InterpartExpressionsBuilder

License requirements: None.

setNarrowArrowType(ArrowheadType) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setNarrowDimensionData(Tag, UFDrf.NarrowDimensionInfo) - Method in interface nxopen.uf.UFDrf

Refer to UF_DRF_set_narrow_dimension_data for documentation.

setNarrowDimensionPreferences(NarrowDimensionData) - Method in interface nxopen.annotations.Dimension

Sets the narrow dimension preferences to the given linear dimension.

setNarrowDimensionPreferences(NarrowDimensionPreferences) - Method in interface nxopen.annotations.DimensionPreferences

Sets the narrow dimension preferences
License requirements: None.

setNarrowDimensionTextOffset(double) - Method in interface nxopen.annotations.Dimension

Sets the narrow dimension text offset for the given chain dimension.

setNarrowDisplayType(NarrowDisplayOption) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setNarrowLeaderAngle(double) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setNarrowTextOffset(double) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setNarrowTextOrientation(NarrowTextOrientation) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setNastranBasic(boolean) - Method in interface nxopen.cae.LaminateRandomEventBuilder

Deprecated.

Deprecated in NX10.0.0. Use LaminateDynamicEventBuilder.setNastranBasicCsys(boolean) instead.

setNastranBasicCsys(boolean) - Method in interface nxopen.cae.LaminateDynamicEventBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setNativeFileBrowser(String) - Method in interface nxopen.cae.CorrelApplyAlignmentFromBuilder

License requirements: nx_correl_base ("FE Correlation")
.

setNativeFileBrowser(String) - Method in interface nxopen.cae.PreTestExportUnvBuilder

License requirements: nx_correl_base ("FE Correlation")
.

setNativeFileBrowser(String) - Method in interface nxopen.display.StudioImageCaptureBuilder

License requirements: None.

setNativeFileBrowser(String) - Method in interface nxopen.features.shipdesign.ReadDataSetBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setNativeFileBrowser(String) - Method in interface nxopen.mechatronics.GanttExportPLCopenBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setNativeFileUnits(PreTestExportUnvBuilder.FileUnitsOption) - Method in interface nxopen.cae.PreTestExportUnvBuilder

License requirements: nx_correl_base ("FE Correlation")
.

setNativeImageFileBrowser(String) - Method in interface nxopen.display.SaveImageFileBrowserBuilder

License requirements: None.

setNativeItem(int) - Method in interface nxopen.linedesigner.ReuseLibraryDragData

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setNativeRfiFileName(String) - Method in interface nxopen.motion.FlexBodyBuilder

License requirements: mechanisms ("MECHANISMS")
.

setNativeToggle(boolean) - Method in interface nxopen.features.shipdesign.ReadDataSetBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setNaturalFrequenciesChoice(LaminateSineEventBuilder.NaturalFrequeciesEnum) - Method in interface nxopen.cae.LaminateSineEventBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setNaturalFrequenciesEnable(boolean) - Method in interface nxopen.cae.LaminateSineEventBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setNavigateViolationLocationOption(boolean) - Method in interface nxopen.routing.DesignRuleViolationViewer

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setNavigationSensitivity(DialogItem.DialogItemIndex, boolean) - Method in interface nxopen.uistyler.DialogItem

Specifies the sensitivity of the navigation buttons at the bottom of the dialog.

setNbpoints(int) - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder

License requirements: None.

setNbpoints(int) - Method in interface nxopen.cam.InspectionScanCurveBuilder

License requirements: None.

setNbScanPoints(int) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setNearestPointOption(boolean) - Method in interface nxopen.features.ProjectCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setNeckChamferEnabled(boolean) - Method in interface nxopen.features.HolePackageBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setNeckChamferEnabled(boolean) - Method in interface nxopen.geometricutilities.StartHoleData

License requirements: solid_modeling ("SOLIDS MODELING")
.

setNeedChangeDisplayPartBack(boolean) - Method in interface nxopen.tooling.RenameAndExportComponentBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setNeedFirstClearance(boolean) - Method in interface nxopen.tooling.SpecialFormingBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setNeedleDirection(SectionAnalysisBuilder.NeedleDirectionType) - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setNeedleDirection(SectionAnalysisExBuilder.NeedleDirectionType) - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setNeedleDirection(SurfaceIntersectionBuilder.DirectionTypes) - Method in interface nxopen.geometricanalysis.SurfaceIntersectionBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setNeedlePlotDisplayed(boolean) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setNeedleScale(double) - Method in interface nxopen.cam.InspectionMeasDataBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setNeedleScale(double) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setNeedSecondClearance(boolean) - Method in interface nxopen.tooling.SpecialFormingBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setNeedThirdClearance(boolean) - Method in interface nxopen.tooling.SpecialFormingBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setNegateFrame(int) - Method in interface nxopen.features.shipdesign.TransFrameBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setNegateOffsetsFlag(boolean) - Method in interface nxopen.routing.Stock

Sets the negate offsets flag of this Stock .

setNegativeFaceColor(int) - Method in interface nxopen.cae.modelcheck.ReverseShellElementNormalBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setNegativeFaceColor(int) - Method in interface nxopen.cae.modelcheck.SolidElementFaceNormalBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setNegativeFlushnessTolerance(double) - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setNegativeGapTolerance(double) - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setNegativeInnerTolerance(double) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setNegativeOuterTolerance(double) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setNegativeToleranceLabelDisplayed(boolean) - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setNeighboringFactor(double) - Method in interface nxopen.cae.responsesimulation.CombinationEvaluationOptions

License requirements: nx_response_anlys ("NX Response Analysis")
.

setNeighborsEnabled(boolean) - Method in interface nxopen.features.ChangeShellThicknessBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setNestedAssyParentComp(Tag, Tag) - Method in interface nxopen.uf.UFPlist

Refer to UF_PLIST_set_nested_assy_parent_comp for documentation.

setNetlistRoundingMethod(LayoutLengthOptions.RoundingMethod) - Method in interface nxopen.formboard.LayoutLengthOptions

License requirements: routing_harness ("Routing Harness")
.

setNetworkArrangementsMode(ComponentNetwork.ArrangementsMode) - Method in interface nxopen.positioning.ComponentNetwork

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setNeutralAxisPercent(double) - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setNeutralFactor(String) - Method in interface nxopen.features.sheetmetal.BendOptions

Deprecated.

Deprecated in NX10.0.0. Use Expression.setRightHandSide(java.lang.String) on the Expression object returned from Features.SheetMetal.BendOptions#neutralFactor instead.

setNeutralFactor(boolean, String) - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign

Sets the bend relief depth value
License requirements: nx_flexible_pcb ("NX Flexible PCB")
.

setNeutralFactor(boolean, String) - Method in interface nxopen.preferences.PartSheetmetal

THE bend relief depth value
License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setNeutralFactor(String) - Method in interface nxopen.tooling.DefineNeutralFactorBuilder

License requirements: None.

setNeutralFactor(String) - Method in interface nxopen.tooling.PrebendBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setNeutralFactorFormula(DefineNeutralFactorBuilder.FormulaOptions) - Method in interface nxopen.tooling.DefineNeutralFactorBuilder

License requirements: None.

setNeutralMethod(InverseBendingLinesBuilder.NeutralMethodType) - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setNeutralName(String) - Method in interface nxopen.cae.ElementCreateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setNeutralName(String) - Method in interface nxopen.cae.ElementExtrudeBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setNeutralName(String) - Method in interface nxopen.cae.ElementProjectBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setNeutralName(String) - Method in interface nxopen.cae.ElementReflectBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setNeutralName(String) - Method in interface nxopen.cae.ElementRevolveBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setNeutralName(String) - Method in interface nxopen.cae.ElementTranslateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setNeutralName(String) - Method in interface nxopen.cae.SpiderElementBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setNeutralOffset(String) - Method in interface nxopen.features.sheetmetal.MigratedPanelBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setNewAngle(double) - Method in interface nxopen.features.EmbossSidewall

Set a new taper angle
License requirements: None.

setNewChangeoverName(String) - Method in interface nxopen.tooling.ChangeoverManagementBuilder

License requirements: None.

setNewColor(int) - Method in interface nxopen.DisplayModification

Sets a new color for objects which will be modified.

setNewComponentName(String) - Method in interface nxopen.assemblies.CreateNewComponentBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setNewDieBaseName(String) - Method in interface nxopen.tooling.DieBaseBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setNewFaceProperties(SessionModeling.NewFacePropertiesInheritance) - Method in interface nxopen.preferences.SessionModeling

Sets the new face properties inheritance.

setNewFile(FileNew) - Method in interface nxopen.assemblies.CreateNewComponentBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setNewFileName(String) - Method in interface nxopen.FileNew

License requirements: None.

setNewFont(DisplayableObject.ObjectFont) - Method in interface nxopen.DisplayModification

Sets a new font (line style) for objects which will be modified
License requirements: None.

setNewGrid(int, int) - Method in interface nxopen.DisplayModification

Set a new grid count for objects which will be modified.

setNewItemId(String) - Method in interface nxopen.tooling.ClonePart

License requirements: None.

setNewItemType(String) - Method in interface nxopen.tooling.ClonePart

License requirements: None.

setNewLayer(int) - Method in interface nxopen.DisplayModification

Sets a new layer for objects which will be modified.

setNewMeshOption(ElementCreateBuilder.NewMeshType) - Method in interface nxopen.cae.ElementCreateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setNewMeshOption(boolean) - Method in interface nxopen.cae.ElementDetachBuilder

License requirements: None.

setNewMeshOption(ElementExtrudeBuilder.NewMeshType) - Method in interface nxopen.cae.ElementExtrudeBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setNewMeshOption(ElementProjectBuilder.NewMeshType) - Method in interface nxopen.cae.ElementProjectBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setNewMeshOption(ElementReflectBuilder.NewMeshType) - Method in interface nxopen.cae.ElementReflectBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setNewMeshOption(ElementRevolveBuilder.NewMeshType) - Method in interface nxopen.cae.ElementRevolveBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setNewMeshOption(ElementTranslateBuilder.NewMeshType) - Method in interface nxopen.cae.ElementTranslateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setNewMeshOption(SpiderElementBuilder.NewMeshType) - Method in interface nxopen.cae.SpiderElementBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setNewMfkId(String) - Method in interface nxopen.tooling.ClonePart

License requirements: None.

setNewMirrorPlane(Plane) - Method in interface nxopen.features.MirrorFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setNewNameRule(RenameAndExportComponentBuilder.NamingRuleType) - Method in interface nxopen.tooling.RenameAndExportComponentBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setNewParents(DisplayableObject[]) - Method in interface nxopen.geometricutilities.ReplAsstBuilder

Set the source entities for the Replacement Assistant.

setNewPart(Part) - Method in interface nxopen.LinkedMirrorPartBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setNewPartName(String) - Method in interface nxopen.tooling.BendInsertDesignBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setNewPartName(String) - Method in interface nxopen.tooling.ClonePart

License requirements: None.

setNewPartNames(String) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder

License requirements: None.

setNewPartNames(String) - Method in interface nxopen.tooling.DieInsertBuilder

License requirements: None.

setNewPartNames(String) - Method in interface nxopen.tooling.PiercingInsertBuilder

License requirements: None.

setNewPartNames(String) - Method in interface nxopen.tooling.PunchInsertBuilder

License requirements: None.

setNewPlane(Plane) - Method in interface nxopen.features.MirrorCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setNewPlane(boolean) - Method in interface nxopen.features.SectionEditBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setNewPlane(Plane) - Method in interface nxopen.geometricutilities.MirrorPattern

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setNewRevisionId(String) - Method in interface nxopen.tooling.ClonePart

License requirements: None.

setNewSensors(boolean) - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setNewStringInName(String) - Method in interface nxopen.tooling.RenameAndExportComponentBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setNewSurfaceLayer(int) - Method in interface nxopen.tooling.DesignTrimToolBuilder

License requirements: None.

setNewSymmetryPlane(Plane) - Method in interface nxopen.features.SymmetricBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setNewTranslucency(int) - Method in interface nxopen.DisplayModification

Sets a new translucency value for objects which will be modified.

setNewWidth(DisplayableObject.ObjectWidth) - Method in interface nxopen.DisplayModification

Sets a new line width for objects which will be modified
License requirements: None.

setNewWindowSetting(Preference.NewWindowChoice) - Method in interface nxopen.cae.xyplot.Preference

License requirements: nx_ftk ("NX Advanced Graphing")
.

setNextBranchID(String) - Method in interface nxopen.routing.BranchPathNumberingBuilder

License requirements: routing_hvac ("Routing HVAC")
.

setNextLinkedRegion(DrawingRegion) - Method in interface nxopen.drawings.DrawingRegionBuilder

Set the next linked regions
License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setNextNumber(int) - Method in interface nxopen.tooling.CloneObject

Sets the next number of clone object.

setNmCopy(String, UFClone.CopyNmOpt) - Method in interface nxopen.uf.UFClone

Refer to UF_CLONE_set_nm_copy for documentation.

setNmifThreshold(double) - Method in interface nxopen.cae.PreTestExciterConfigBuilder

License requirements: nx_correl_base ("FE Correlation")
.

setNocoreStock(double) - Method in interface nxopen.cam.WedmNocoreGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setNodalAveraging(ResultProbeBuilder.NodalCombination) - Method in interface nxopen.cae.ResultProbeBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setNodalCombinationValue(PostGraphBuilder.NodalCombination) - Method in interface nxopen.cae.PostGraphBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setNodalcombinetype(ResultVariable.NodalCombination) - Method in interface nxopen.cae.ResultVariable

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setNodalComponent(VelocityImpactDirection.NodalComponentType) - Method in interface nxopen.cae.responsesimulation.VelocityImpactDirection

License requirements: nx_response_anlys ("NX Response Analysis")
.

setNodalMapping(int) - Method in interface nxopen.cae.LaminateImportedLayupBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setNoDataOption(PostGraphBuilder.DataErrorHandling) - Method in interface nxopen.cae.PostGraphBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setNoDataOption(ResultsCombinationBuilder.NoData) - Method in interface nxopen.cae.ResultsCombinationBuilder

Set no data option
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setNoDataOption(ResultsEnvelopeBuilder.NoData) - Method in interface nxopen.cae.ResultsEnvelopeBuilder

Set no data option
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setNoDataOption(ResultsReductionBuilder.NoData) - Method in interface nxopen.cae.ResultsReductionBuilder

Set no data option
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setNoDataOption(TransientResultsReductionBuilder.NoData) - Method in interface nxopen.cae.TransientResultsReductionBuilder

Set no data option
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setNode(FENode) - Method in interface nxopen.cae.BeamSectionOrientationOptions

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setNode(FENode) - Method in interface nxopen.cae.connections.NodeLocation

License requirements: nx_masterfem ("Finite Element Modeling")
.

setNodeCheckCallback(Navigator.NodeCheckCallback) - Method in interface nxopen.shipdesign.Navigator

Sets node check callback.

setNodeColor(NXColor) - Method in interface nxopen.cae.ModelDisplayBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setNodeConnectivity(boolean) - Method in interface nxopen.cae.NodeElementInfoBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setNodeDeselectedCallback(Navigator.NodeDeselectedCallback) - Method in interface nxopen.shipdesign.Navigator

Sets node deselected callback.

setNodeDisplayMode(ModelDisplayBuilder.NodeDisplayModeType) - Method in interface nxopen.cae.ModelDisplayBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setNodeElementOption(DurabilityStressAxesBuilder.NodeElementOptionEnum) - Method in interface nxopen.cae.DurabilityStressAxesBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setNodeId(int) - Method in interface nxopen.motion.MarkerToNodeData

License requirements: mechanisms ("MECHANISMS")
.

setNodeIdDisplayFlag(boolean) - Method in interface nxopen.cae.CaeDOFSetDisplay

Sets the true/false flag based on whether the node id of the DOF Set is displayed in the graphics window
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setNodeIdDisplayFlag(boolean) - Method in interface nxopen.cae.SimBCDisplay

Sets the true/false flag based on whether the node id of the BC is displayed in the graphics window
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setNodeIDsOnFreeEdge(int[], int[]) - Method in interface nxopen.bodydes.OnestepUnformBuilder

Sets the node IDs on the free edges (non-constrainted boundary edges).

setNodeLocation(double[]) - Method in interface nxopen.motion.MarkerToNodeData

Sets the node locations
License requirements: mechanisms ("MECHANISMS")
.

setNodeMapSizeLimit(int) - Method in interface nxopen.cae.CorrelSolutionBuilder

License requirements: nx_correl_base ("FE Correlation")
.

setNodeMapSizeLimitActive(boolean) - Method in interface nxopen.cae.CorrelSolutionBuilder

License requirements: nx_correl_base ("FE Correlation")
.

setNodeMarker(ModelDisplayBuilder.NodeMarkerType) - Method in interface nxopen.cae.ModelDisplayBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setNodeMatchingDistance(double) - Method in interface nxopen.cae.CorrelSolutionBuilder

License requirements: nx_correl_base ("FE Correlation")
.

setNodeMergeOption(SolverAppendOption.MergeOption) - Method in interface nxopen.cae.SolverAppendOption

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setNodeMeshShowHideOption(ModelDisplayBuilder.NodeMeshShowHideOptionType) - Method in interface nxopen.cae.ModelDisplayBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setNodeName(String) - Method in interface nxopen.features.shipdesign.ShipNavigatorNodeBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setNodeOffset(int) - Method in interface nxopen.cae.SolverAppendOption

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setNodePosition(FENode, Point3d) - Method in interface nxopen.cae.NodesRepositionBuilder

Set the new absolute postion for the input node.

setNodePositions(FENode[], Point3d[]) - Method in interface nxopen.cae.NodesRepositionBuilder

Set the new absolute postions for an array of input nodes.

setNodes(int[]) - Method in interface nxopen.cae.FreeBodyResultsBuilder

The interface nodes
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setNodes(int[]) - Method in interface nxopen.cae.PostAnnotationBuilder

Set the node ids for which annotation is defined
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setNodes(FENode[]) - Method in interface nxopen.cae.ResultMeasureModelSubsetFE

Set the nodes
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setNodeSelectedCallback(Navigator.NodeSelectedCallback) - Method in interface nxopen.shipdesign.Navigator

Sets node selected callback.

setNodeSelectInternal(boolean) - Method in interface nxopen.cae.ModelDisplayBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setNodeSelection(TaggedObject, FENode[]) - Method in interface nxopen.cae.ManualMorphBuilder

Sets the node selected for manual map
License requirements: nx_masterfem ("Finite Element Modeling")
.

setNodesEnabled(boolean) - Method in interface nxopen.cae.PreTestDofSetBuilder

License requirements: nx_correl_base ("FE Correlation")
.

setNodeString(String) - Method in interface nxopen.annotations.SymbolCatalogBuilder

License requirements: nx_layout ("NX Layout")
.

setNodeToCurveEndPointMap(TaggedObject, FENode[]) - Method in interface nxopen.cae.ManualMorphBuilder

Sets the node-to-CurveEndPoint map for node-to-edge mapping type
License requirements: nx_masterfem ("Finite Element Modeling")
.

setNodeTolerance(double) - Method in interface nxopen.cae.BoltBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setNodeTolerance(double) - Method in interface nxopen.features.RapidSurfaceBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setNodeToVertexMap(TaggedObject, FENode[]) - Method in interface nxopen.cae.ManualMorphBuilder

Sets the node-to-vetex map for node-to-edge mapping type
License requirements: nx_masterfem ("Finite Element Modeling")
.

setNodeType(ShipNavigatorNodeBuilder.NodeTypes) - Method in interface nxopen.features.shipdesign.ShipNavigatorNodeBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setNodeUnattachedMarker(ModelDisplayBuilder.NodeUnattachedMarkerType) - Method in interface nxopen.cae.ModelDisplayBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setNodragValue(double) - Method in interface nxopen.cam.CycleNodragClearance

License requirements: cam_base ("CAM BASE")
.

setNoEdit(boolean) - Method in interface nxopen.Expression

License requirements: None.

setNoInteractionQueriesToggle(boolean) - Method in interface nxopen.tooling.MWDefineSheetsBuilder

License requirements: None.

setNomenclature(String[]) - Method in interface nxopen.annotations.MaterialSpecificationBuilder

Sets the nomenclature
License requirements: None.

setNomenclature(String[]) - Method in interface nxopen.annotations.ProcessSpecificationBuilder

Sets the nomenclature
License requirements: None.

setNominalDecimalPlaces(int) - Method in interface nxopen.annotations.Dimension

Sets a setting to control the number of decimal places for the nominal value of a dimension.

setNominalDepthPerCut(double) - Method in interface nxopen.cam.FeedsOptimizationData

License requirements: cam_base ("CAM BASE")
.

setNominalDMS(String) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setNominalFlushness(double) - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setNominalGap(double) - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setNominalLabelDisplayed(boolean) - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setNominalLeadAngle(double) - Method in interface nxopen.cam.ToolAxisVariable

License requirements: cam_base ("CAM BASE")
.

setNominalLeadAngleType(ToolAxisVariable.NominalLeadAngleTypes) - Method in interface nxopen.cam.ToolAxisVariable

License requirements: cam_base ("CAM BASE")
.

setNominalName(String) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setNominalSource(InspectionToleranceOperationBuilder.ToleranceSource) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setNominalStepover(double) - Method in interface nxopen.cam.FeedsOptimizationData

License requirements: cam_base ("CAM BASE")
.

setNominalVoltage(double) - Method in interface nxopen.motion.PMDCMotorBuilder

Deprecated.

Deprecated in NX8.5.0. Obtion the exression using PMDCMotorBuilder.nominalVoltageExpression() to query or edit it.

setNoModelDisplayOnPostviewCreation(boolean) - Method in interface nxopen.preferences.PostProcessing

Sets the flag which indicates that no finite element model data will displayed when postviews are created
License requirements: None.

setNonCliffEdges(ScCollector) - Method in interface nxopen.features.EdgeBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setNonFeatureApplication(boolean) - Method in interface nxopen.geometricutilities.WaveLinkRepository

Specify if the client is non-feature based application or not.

setNonFeatureEdgeSelection(UFGdt.EdgeSelectType) - Method in interface nxopen.uf.UFGdt

Refer to UF_GDT_set_non_feature_edge_selection for documentation.

setNonFeatureMode() - Method in interface nxopen.ScCollector

Sets the true option on ScCollector for collection in non-feature mode.

setNonFeatureMode() - Method in interface nxopen.Section

Sets the true option on Section for collection in non-feature mode.

setNonGeometric(boolean) - Method in interface nxopen.assemblies.AssembliesGeneralPropertiesBuilder

License requirements: None.

setNonGeometricState(Component, boolean) - Method in interface nxopen.assemblies.ComponentAssembly

Sets the component state to Geometric or Non-Geometric.

setNonlinearityCoefficient(double) - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setNonManifoldEdgeDisplayStyle(ElementEdgeCheckBuilder.EdgeDisplayStyle) - Method in interface nxopen.cae.modelcheck.ElementEdgeCheckBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setNonMasterSaveAsOption(LogicalObject, NonMasterData.CopyNonMasterPartsOption) - Method in interface nxopen.pdm.NonMasterData

Set the nonmasters saveAs option for given logical object.

setNonmasterSaveAsOption(PartFromPartBuilder.FileSaveAs) - Method in interface nxopen.pdm.PartFromPartBuilder

Sets the non-master parts to save during the save as operation
Deprecated in NX10 for "Save As of master parts" operation.

setNonMasterSaveAsOption(LogicalObject, PartOperationBuilder.NonMasterSaveAs) - Method in interface nxopen.pdm.PartOperationBuilder

Deprecated.

Deprecated in NX10.0.0. Use PartOperationCopyBuilder.setCopyNonMasterPartsOption(nxopen.pdm.LogicalObject, nxopen.pdm.PartOperationCopyBuilder.CopyNonMasterParts) instead

setNonmasterSeedPartData(String) - Method in interface nxopen.PartCollection

Set non master seed part data for opening unpopulated non master part
License requirements: None.

setNonmasterToSaveAs(String, boolean) - Method in interface nxopen.pdm.PartFromPartBuilder

Sets whether or not the non-master part specified will actually get saved during the save as operation.

setNonMovingGroupGrounded(boolean) - Method in interface nxopen.positioning.Network

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setNonParametricSpline(Spline, StudioSplineBuilder.Method) - Method in interface nxopen.features.StudioSplineBuilder

Deprecated.

Deprecated in NX8.0.0. Use StudioSplineBuilderEx instead.

setNonSectionedHiddenColor(NXColor) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setNonSectionedHiddenFont(Font) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setNonSectionedHiddenWidth(Width) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setNonSectionedSecondaryHiddenColor(NXColor) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setNonSectionedSecondaryHiddenFont(Font) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setNonSectionedSecondaryHiddenWidth(Width) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setNonSectionedSecondaryVisibleColor(NXColor) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setNonSectionedSecondaryVisibleFont(Font) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setNonSectionedSecondaryVisibleWidth(Width) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setNonSectionedVisibleColor(NXColor) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setNonSectionedVisibleFont(Font) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setNonSectionedVisibleWidth(Width) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setNonStandardPoints(Point3d[], boolean) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder

Set the point coordinates
License requirements: None.

setNonTiltLeadIn(NcmWedmBuilder.NonTiltLeadInTypes) - Method in interface nxopen.cam.NcmWedmBuilder

License requirements: cam_base ("CAM BASE")
.

setNonUniqueMembership(Tag) - Method in interface nxopen.uf.UFGroup

Refer to UF_GROUP_set_non_unique_membership for documentation.

setNoOfStairs(int) - Method in interface nxopen.linedesigner.StairwayEquipmentBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setNormal(Vector3d) - Method in interface nxopen.assemblies.PlaneSearchTermBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setNormal(Vector3d) - Method in interface nxopen.display.DynamicSectionBuilder

Sets the normal of the section plane
Section offset and rotation matrix are updated.

setNormal(Vector3d) - Method in interface nxopen.IPlane

License requirements: None.

setNormal1Reversed(boolean) - Method in interface nxopen.features.StyledBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setNormal2Reversed(boolean) - Method in interface nxopen.features.StyledBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setNormalBbpslug(PiercingInsertBuilder.NormalBbpslugType) - Method in interface nxopen.tooling.PiercingInsertBuilder

License requirements: None.

setNormalBbpslug(SpecialPiercingInsertBuilder.NormalBottomBackingPlateSlugType) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder

License requirements: None.

setNormalBottomBackPlateSlug(DieCavityAndSlugHoleBuilder.BottomPlateSlugItems) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setNormalCavity(DieCavityAndSlugHoleBuilder.CavityTypeItems) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setNormalCavity(PiercingInsertBuilder.NormalCavityType) - Method in interface nxopen.tooling.PiercingInsertBuilder

License requirements: None.

setNormalCavity(SpecialPiercingInsertBuilder.NormalCavityType) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder

License requirements: None.

setNormalClearance(double) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setNormalClearance(double) - Method in interface nxopen.tooling.PiercingInsertBuilder

License requirements: None.

setNormalClearance(double) - Method in interface nxopen.tooling.PunchInsertBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setNormalClearance(double) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder

License requirements: None.

setNormalClearanceOption(DieCavityAndSlugHoleBuilder.ClearanceOptionItems) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setNormalClearanceOption(PiercingInsertBuilder.NormalClearanceOptionType) - Method in interface nxopen.tooling.PiercingInsertBuilder

License requirements: None.

setNormalClearanceOption(PunchInsertBuilder.NormalClearanceOptionTypeItems) - Method in interface nxopen.tooling.PunchInsertBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setNormalDieShoeSlug(DieCavityAndSlugHoleBuilder.DieShoeSlugTypeItems) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setNormalDir(DeckListItemBuilder.DatumDir) - Method in interface nxopen.features.shipdesign.DeckListItemBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setNormalDirection(Direction) - Method in interface nxopen.annotations.LocatorDesignatorBuilder

License requirements: None.

setNormalDirection(Direction) - Method in interface nxopen.drawings.OvtBuilder

License requirements: drafting ("DRAFTING")
.

setNormalDirection(Xform) - Method in interface nxopen.drawings.ProjectedViewOrientationBuilder

License requirements: drafting ("DRAFTING")
.

setNormalDirection(Direction) - Method in interface nxopen.drawings.SvtBuilder

License requirements: drafting ("DRAFTING")
.

setNormalDirectionFlipped(boolean) - Method in interface nxopen.cae.GroupByBoundaryBuilder

License requirements: None.

setNormalDirectionI(double) - Method in interface nxopen.cam.InspectionCparlnFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setNormalDirectionJ(double) - Method in interface nxopen.cam.InspectionCparlnFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setNormalDirectionK(double) - Method in interface nxopen.cam.InspectionCparlnFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setNormalDsslug(PiercingInsertBuilder.NormalDsslugType) - Method in interface nxopen.tooling.PiercingInsertBuilder

License requirements: None.

setNormalDsslug(SpecialPiercingInsertBuilder.NormalDieShoeSlugType) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder

License requirements: None.

setNormalForce(double) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setNormalForEachScrap1(boolean) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setNormalForEachScrap1(boolean) - Method in interface nxopen.tooling.PiercingInsertBuilder

License requirements: None.

setNormalForEachScrap2(boolean) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setNormalForEachScrap2(boolean) - Method in interface nxopen.tooling.PiercingInsertBuilder

License requirements: None.

setNormalizeResults(boolean) - Method in interface nxopen.cae.responsesimulation.FrequencyDefinition

License requirements: nx_response_anlys ("NX Response Analysis")
.

setNormalOffsetSide(DieCavityAndSlugHoleBuilder.OffsetSideOptionItems) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setNormalOffsetSide(PiercingInsertBuilder.NormalOffsetSideType) - Method in interface nxopen.tooling.PiercingInsertBuilder

License requirements: None.

setNormalOffsetSide(PunchInsertBuilder.NormalOffsetSideTypeItems) - Method in interface nxopen.tooling.PunchInsertBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setNormalOffsetSide(SpecialPiercingInsertBuilder.NormalOffsetSideType) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder

License requirements: None.

setNormalOnePunchToggle(boolean) - Method in interface nxopen.tooling.PiercingInsertBuilder

License requirements: None.

setNormalOnePunchToggle(boolean) - Method in interface nxopen.tooling.PunchInsertBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setNormalOption(FaceCurvatureAnalysisBuilder.DirectionTypes) - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setNormalOrientation(Matrix3x3) - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setNormalOrigin(Point3d) - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setNormalPunchLength(String) - Method in interface nxopen.tooling.PiercingInsertBuilder

License requirements: None.

setNormalPunchLength(String) - Method in interface nxopen.tooling.PunchInsertBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setNormalRenameDialog(boolean) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setNormalRenameDialog(boolean) - Method in interface nxopen.tooling.GeneralInsertBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setNormalRenameDialog(boolean) - Method in interface nxopen.tooling.PiercingInsertBuilder

License requirements: None.

setNormalRenameDialog(boolean) - Method in interface nxopen.tooling.PunchInsertBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setNormalsColor(NXColor) - Method in interface nxopen.cae.MeshCollectorDisplayDefaults2d

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setNormalsColor(NXColor) - Method in interface nxopen.cae.MeshDisplaySettings2d

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setNormalSlugPara1(double) - Method in interface nxopen.tooling.PiercingInsertBuilder

License requirements: None.

setNormalSlugPara1(double) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder

License requirements: None.

setNormalSlugPara2(double) - Method in interface nxopen.tooling.PiercingInsertBuilder

License requirements: None.

setNormalSlugPara2(double) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder

License requirements: None.

setNormalSlugPara3(double) - Method in interface nxopen.tooling.PiercingInsertBuilder

License requirements: None.

setNormalSlugPara3(double) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder

License requirements: None.

setNormalSlugPara4(double) - Method in interface nxopen.tooling.PiercingInsertBuilder

License requirements: None.

setNormalSlugPara4(double) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder

License requirements: None.

setNormalSlugParameter1(double) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setNormalSlugParameter2(double) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setNormalSlugParameter3(double) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setNormalSlugParameter4(double) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setNormalSurface(Face) - Method in interface nxopen.cam.InspectionLineFeatureBuilder

Sets the underlying normal surface
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setNormalToEndSections(boolean) - Method in interface nxopen.features.MeshSurfaceBuilder

Sets the normal to end sections for Through Curves surface.

setNormalToEndSections(boolean) - Method in interface nxopen.features.ThroughCurvesBuilder

License requirements: features_modeling ("FEATURES MODELING") OR nx_freeform_1 ("basic freeform modeling")
.

setNormalToGridPlane(boolean) - Method in interface nxopen.geometricutilities.CombOptionsBuilder

License requirements: None.

setNormalVector(Direction) - Method in interface nxopen.cam.InspectionPlaneFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setNormalVector(Direction) - Method in interface nxopen.display.DecalBuilder

License requirements: None.

setNormalVector(Direction) - Method in interface nxopen.display.IrayPlusSimpleMaterialEditorBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setNormalVector(Direction) - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setNormalVectorI(double) - Method in interface nxopen.cam.InspectionArcFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setNormalVectorI(double) - Method in interface nxopen.cam.InspectionCircleFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setNormalVectorI(double) - Method in interface nxopen.cam.InspectionEdgePointFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setNormalVectorI(double) - Method in interface nxopen.cam.InspectionPlaneFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setNormalVectorI(double) - Method in interface nxopen.cam.InspectionPointFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setNormalVectorJ(double) - Method in interface nxopen.cam.InspectionArcFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setNormalVectorJ(double) - Method in interface nxopen.cam.InspectionCircleFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setNormalVectorJ(double) - Method in interface nxopen.cam.InspectionEdgePointFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setNormalVectorJ(double) - Method in interface nxopen.cam.InspectionPlaneFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setNormalVectorJ(double) - Method in interface nxopen.cam.InspectionPointFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setNormalVectorK(double) - Method in interface nxopen.cam.InspectionArcFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setNormalVectorK(double) - Method in interface nxopen.cam.InspectionCircleFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setNormalVectorK(double) - Method in interface nxopen.cam.InspectionEdgePointFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setNormalVectorK(double) - Method in interface nxopen.cam.InspectionPlaneFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setNormalVectorK(double) - Method in interface nxopen.cam.InspectionPointFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setNormalVectorValue(Vector3d) - Method in interface nxopen.display.DecalBuilder

License requirements: None.

setNormalWidth(double) - Method in interface nxopen.PrintBuilder

License requirements: None.

setNoseAngle(double) - Method in interface nxopen.annotations.HoleTableSettingsHoleFiltersBuilder

License requirements: drafting ("DRAFTING")
.

setNotchFactor(double) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setNote(String[]) - Method in interface nxopen.AttributeTemplatesBuilder

Sets the note.

setNote(Note) - Method in interface nxopen.drafting.SpecifyRuleBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setNoteCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use TrackDrawingChangesReportFilterBuilder.setReportFilterStatus(nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter, boolean) instead.

setNoteLeaderTerminatorCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use TrackDrawingChangesReportFilterBuilder.setReportFilterStatus(nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter, boolean) instead.

setNoteOriginCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use TrackDrawingChangesReportFilterBuilder.setReportFilterStatus(nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter, boolean) instead.

setNoteRetainedStatusCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use TrackDrawingChangesReportFilterBuilder.setReportFilterStatus(nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter, boolean) instead.

setNoteRule(String) - Method in interface nxopen.drafting.RulesBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setNoteText(String) - Method in interface nxopen.annotations.LocatorDesignatorBuilder

License requirements: None.

setNoteText(String) - Method in interface nxopen.annotations.MasterSymbolListItemBuilder

License requirements: drafting ("DRAFTING")
.

setNoteTextCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use TrackDrawingChangesReportFilterBuilder.setReportFilterStatus(nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter, boolean) instead.

setNoteTitle(String) - Method in interface nxopen.annotations.MasterSymbolListItemBuilder

License requirements: drafting ("DRAFTING")
.

setNotifyNodeSelectedPostHandler(Explorer.NotifyNodeSelectedPostCallback) - Method in interface nxopen.blockstyler.Explorer

Sets the NotifyNodeSelectedPost handler.

setNotifyNodeSelectedPreHandler(Explorer.NotifyNodeSelectedPreCallback) - Method in interface nxopen.blockstyler.Explorer

Sets the NotifyNodeSelectedPre handler.

setNotifyOnDelete(boolean) - Method in interface nxopen.preferences.SessionModeling

Sets the option " Notify on Delete " gives choice, whether the user wants a notification message when a feature is being deleted will effect other features.

setNoUpdate(boolean) - Method in interface nxopen.Expression

License requirements: None.

setNSection(int) - Method in interface nxopen.features.SectionInertiaAnalysisBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setNthColumn(int, double[]) - Method in interface nxopen.GeneralScalarTable

Sets the entire Nth column of values.

setNthColumnUnits(int, Unit) - Method in interface nxopen.GeneralScalarTable

Sets the entire Nth column of values.

setNthConnectorExpressionPropagationList(int, Expression) - Method in interface nxopen.linedesigner.TypedConnectorFeatureBuilder

Returns the enter text string
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setNthMeanBin(int, double) - Method in interface nxopen.cae.DurabilityDamageEvaluationBuilder

Sets the nth mean bin.

setNthNominalRangeBin(int, double) - Method in interface nxopen.cae.DurabilityDamageEvaluationBuilder

Sets the nth nominal range bin.

setNthParameterDisplay(HoleCalloutSettingsBuilder.Featuretype, int, boolean) - Method in interface nxopen.annotations.HoleCalloutSettingsBuilder

Sets the display status of the nth hole feature parameter of feature type.

setNthParameterPrefix(HoleCalloutSettingsBuilder.Featuretype, int, String[]) - Method in interface nxopen.annotations.HoleCalloutSettingsBuilder

If the prefix of the nth hole feature parameter of feature type can be edited, sets its prefix.

setNthParameterSuffix(HoleCalloutSettingsBuilder.Featuretype, int, String[]) - Method in interface nxopen.annotations.HoleCalloutSettingsBuilder

If the suffix of the nth hole feature parameter of feature type can be edited, sets its suffix.

setNthParameterValue(HoleCalloutSettingsBuilder.Featuretype, int, String) - Method in interface nxopen.annotations.HoleCalloutSettingsBuilder

Sets the parameter expression of the nth hole feature parameter of feature type.

setNthRow(int, double[]) - Method in interface nxopen.GeneralScalarTable

Sets the entire Nth row of values.

setNthSecondaryArrowheadOrientation(int, TextPlacement) - Method in interface nxopen.annotations.BaseLinearDimensionBuilder

The arrowhead orientation for nth secondary dimensions
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setNthSecondaryArrowheadOrientation(int, TextPlacement) - Method in interface nxopen.annotations.RadialDimensionBuilder

The arrowhead orientation for nth secondary dimensions
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setNthSecondaryOrigin(int, Point3d) - Method in interface nxopen.annotations.BaseLinearDimensionBuilder

The origin for nth secondary dimensions
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setNthSecondaryOrigin(int, Point3d) - Method in interface nxopen.annotations.RadialDimensionBuilder

The origins for secondary dimensions
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setNullBandTolerance(double) - Method in interface nxopen.cam.ProbeToleranceParametersBuilder

License requirements: None.

setNullUserAttribute(Tag, String, int, boolean) - Method in interface nxopen.uf.UFAttr

Refer to UF_ATTR_set_null_user_attribute for documentation.

setNumAssociatedObjectsSets(int) - Method in interface nxopen.annotations.PmiData

Sets the number of associated objects list
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setNumBends(DirectUnfoldBuilder.Bend) - Method in interface nxopen.tooling.DirectUnfoldBuilder

License requirements: None.

setNumber(int) - Method in interface nxopen.cam.ReliefCut

License requirements: cam_base ("CAM BASE")
.

setNumber(int) - Method in interface nxopen.cam.SpringPasses

License requirements: cam_base ("CAM BASE")
.

setNumber(String) - Method in interface nxopen.drafting.DrawingCreationWizardBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setNumber(String) - Method in interface nxopen.drawings.DrawingSheetBuilder

License requirements: drafting ("DRAFTING")
.

setNumber(int) - Method in interface nxopen.features.IFormBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setNumber(int) - Method in interface nxopen.features.IsoparametricCurvesBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setNumber(int) - Method in interface nxopen.features.subdivision.SubdivisionSplitFaceBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setNumber(int) - Method in interface nxopen.geometricanalysis.sectionanalysis.CurveAlignedBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setNumber(int) - Method in interface nxopen.geometricanalysis.sectionanalysis.IsoparametricBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setNumber(int) - Method in interface nxopen.geometricanalysis.sectionanalysis.ParallelPlanesExBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setNumber(int) - Method in interface nxopen.geometricanalysis.sectionanalysis.RadialBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setNumber(int) - Method in interface nxopen.geometricanalysis.sectionanalysis.XYZPlaneBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setNumber(int) - Method in interface nxopen.geometricutilities.CurveShapingBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setNumber(int) - Method in interface nxopen.sim.KinematicAxisBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setNumber(int, int, SpreadsheetCellData, int) - Method in interface nxopen.Spreadsheet

Stores a numeric value in the specified cell of the worksheet.

setNumberAtFirstDirection(int) - Method in interface nxopen.cam.StepoverBuilder

License requirements: cam_base ("CAM BASE")
.

setNumberAtSecondDirection(int) - Method in interface nxopen.cam.StepoverBuilder

License requirements: cam_base ("CAM BASE")
.

setNumberAttr(String) - Method in interface nxopen.pdm.PartOperationImportBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setNumberBends(PrebendBuilder.NumberBendsOption) - Method in interface nxopen.tooling.PrebendBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setNumberCheckPoints(int) - Method in interface nxopen.geometricanalysis.DeviationChecking

License requirements: None.

setNumberColumnString(String) - Method in interface nxopen.blockstyler.SetList

License requirements: None.

setNumberConnectedPanels(int) - Method in interface nxopen.weld.WeldPointBuilder

Sets the num connected panels.

setNumberEnabled(boolean) - Method in interface nxopen.geometricanalysis.sectionanalysis.ParallelPlanesExBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setNumberEnabled(boolean) - Method in interface nxopen.geometricanalysis.sectionanalysis.XYZPlaneBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setNumberingSource(PartOperationImportBuilder.NumberingSourceOption) - Method in interface nxopen.pdm.PartOperationImportBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setNumberInSeries(int) - Method in interface nxopen.display.DynamicSectionBuilder

License requirements: None.

setNumberIntermediate(int) - Method in interface nxopen.tooling.IntermediateStageBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setNumberIntervals(int) - Method in interface nxopen.tooling.FlowDisplayBuilder

License requirements: ug_mold_design ("UG MOLD")
.

setNumberList(String[]) - Method in interface nxopen.AttributeTemplatesBuilder

Sets the number list.

setNumberOfBendSegments(int) - Method in interface nxopen.features.sheetmetal.LoftedFlangeBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setNumberOfColors(FaceAnalysisDisplayBuilder.ColorsOptions) - Method in interface nxopen.geometricanalysis.FaceAnalysisDisplayBuilder

License requirements: None.

setNumberOfColumns(int) - Method in interface nxopen.annotations.TableSectionBuilder

License requirements: drafting ("DRAFTING")
.

setNumberOfColumns(int) - Method in interface nxopen.blockstyler.Enumeration

License requirements: None.

setNumberOfColumns(int) - Method in interface nxopen.blockstyler.SetList

License requirements: None.

setNumberOfColumns(int) - Method in interface nxopen.blockstyler.Table

License requirements: None.

setNumberofcomponent(int) - Method in interface nxopen.cae.ResultVariable

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setNumberOfContourLines(int) - Method in interface nxopen.geometricanalysis.DistanceAnalysisBuilder

License requirements: None.

setNumberOfContourLines(int) - Method in interface nxopen.geometricanalysis.RadiusAnalysisBuilder

License requirements: None.

setNumberOfContourLines(int) - Method in interface nxopen.geometricanalysis.SlopeAnalysisBuilder

License requirements: None.

setNumberOfContours(int) - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setNumberOfCopies(int) - Method in interface nxopen.features.MoveObjectBuilder

License requirements: None.

setNumberOfCopies(int) - Method in interface nxopen.features.OffsetCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setNumberOfCopies(int) - Method in interface nxopen.features.SectionCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setNumberOfCopies(int) - Method in interface nxopen.features.subdivision.CopyCageBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setNumberOfCopies(int) - Method in interface nxopen.features.subdivision.OffsetCageBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setNumberOfCopies(int) - Method in interface nxopen.routing.TransformPathBuilder

Sets the number of copies to create in the commit method for the option Routing.TransformPathBuilder.TransformOption#COPY_ORIGINAL .

setNumberOfCopies(int) - Method in interface nxopen.SketchOffsetBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setNumberOfCopy(int) - Method in interface nxopen.cae.ElementExtrudeBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setNumberOfCopy(int) - Method in interface nxopen.cae.ElementRevolveBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setNumberOfCopy(int) - Method in interface nxopen.tooling.ReliefDesignBuilder

License requirements: None.

setNumberOfCurves(int) - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setNumberOfCuts(int) - Method in interface nxopen.cam.BladeCutLevels

License requirements: cam_base ("CAM BASE")
.

setNumberOfCuts(int) - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder

License requirements: cam_base ("CAM BASE")
.

setNumberOfDefinePoints(int) - Method in interface nxopen.features.RapidSurfaceBuilder

Deprecated.

Deprecated in NX6.0.0. Use RapidSurfaceBuilder.setNumberOfDefiningPoints(int) instead.

setNumberOfDefiningPoints(int) - Method in interface nxopen.features.RapidSurfaceBuilder

Sets number of defining points
License requirements: studio_free_form ("STUDIO FREE FORM")
.

setNumberOfElementsInHysterisisLoop(int) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setNumberOfFinishPasses(int) - Method in interface nxopen.cam.FinishPassesBuilder

License requirements: cam_base ("CAM BASE")
.

setNumberOfFlanges(int) - Method in interface nxopen.cae.connections.IFlangeContainer

License requirements: nx_masterfem ("Finite Element Modeling")
.

setNumberOfFrames(int) - Method in interface nxopen.features.shipdesign.ItFrameListItemBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setNumberOfIncrements(int) - Method in interface nxopen.cae.optimization.TBSTestFunction

License requirements: cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setNumberOfIntermediateCuts(int) - Method in interface nxopen.cam.BladeCutLevels

License requirements: cam_base ("CAM BASE")
.

setNumberOfLayers(int) - Method in interface nxopen.cae.MeshControlBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setNumberOfLeaders(int) - Method in interface nxopen.annotations.LeaderBundle

Sets the number of leaders.

setNumberOfLevels(int) - Method in interface nxopen.assemblies.UpdateStructureBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setNumberOfLevels(int) - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder

License requirements: cam_base ("CAM BASE")
.

setNumberOfMargins(double) - Method in interface nxopen.annotations.OrdinateDimensionPreferences

Sets the number of margins
License requirements: None.

setNumberOfMargins(int) - Method in interface nxopen.annotations.OrdinateStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setNumberOfMaxBins(int) - Method in interface nxopen.cae.DurabilityDamageEvaluationBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setNumberOfMeanBins(int) - Method in interface nxopen.cae.DurabilityDamageEvaluationBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setNumberOfMiters(int) - Method in interface nxopen.routing.MiteredBendCorner

Sets the number of miters in the corner.

setNumberOfOccurrences(int) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setNumberOfPairs(int) - Method in interface nxopen.routing.DuctReinforcementBuilder

License requirements: routing_hvac ("Routing HVAC")
.

setNumberOfPasses(int) - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder

License requirements: cam_base ("CAM BASE")
.

setNumberOfPasses(int) - Method in interface nxopen.cam.TurnRoughFinishTestCut

License requirements: cam_base ("CAM BASE")
.

setNumberOfPiecesLock(boolean) - Method in interface nxopen.routing.OverstockBuilder

License requirements: routing_advanced ("Routing Advanced") OR routing_harness ("Routing Harness") OR routing_cabling ("Routing Cabling") OR routing_pipetube ("Routing Piping and Tubing") OR routing_hvac ("Routing HVAC") OR routing_platform ("Routing Platform") OR routing_pid ("Routing PID")
.

setNumberOfPoints(int) - Method in interface nxopen.weld.JointmarkGuideBuilder

License requirements: ugweld ("UG WELD")
.

setNumberOfPointsOnEdge(int) - Method in interface nxopen.cae.WeldBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setNumberOfPointsOption(WeldBuilder.NumberOfPointsOnEdgeType) - Method in interface nxopen.cae.WeldBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setNumberOfRevolutions(double) - Method in interface nxopen.cam.PathHelixMotion

License requirements: cam_base ("CAM BASE")
.

setNumberOfRows(int) - Method in interface nxopen.annotations.TableSectionBuilder

License requirements: drafting ("DRAFTING")
.

setNumberOfRows(int) - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setNumberOfRows(int) - Method in interface nxopen.features.TabNoteCfgBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setNumberOfRows(int, double) - Method in interface nxopen.GeneralScalarTable

Sets the number of rows
License requirements: None.

setNumberOfSections(int) - Method in interface nxopen.cae.AxiSymmetricParameters

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setNumberOfSegments(int) - Method in interface nxopen.features.subdivision.ExtractCagePolylineBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setNumberOfSegments(int) - Method in interface nxopen.features.subdivision.SubdivisionExtrudeCageBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setNumberOfSegments(int) - Method in interface nxopen.features.subdivision.SubdivisionLoftBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setNumberOfSegments(int) - Method in interface nxopen.features.subdivision.SubdivisionTubeBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setNumberOfSegments(boolean) - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. Use WeldGrooveBuilder.method() and WeldGrooveBuilder.setMethod(nxopen.weld.WeldGrooveBuilder.SkipWeldMethod) instead.

setNumberOfSegments(String) - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. Use WeldGrooveBuilder.numberOfWelds() instead.

setNumberOfSides(int) - Method in interface nxopen.SketchPolygonBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setNumberOfStandardDeviations(double) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setNumberOfStarts(int) - Method in interface nxopen.cam.ThreadCutParameters

License requirements: cam_base ("CAM BASE")
.

setNumberOfStepovers(int) - Method in interface nxopen.cam.StepoverBuilder

License requirements: cam_base ("CAM BASE")
.

setNumberOfSteps(int) - Method in interface nxopen.cam.CornerControlBuilder

License requirements: cam_base ("CAM BASE")
.

setNumberOfSubElements(int) - Method in interface nxopen.cae.OneDimensionalElementSplitBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setNumberOfThreads(double) - Method in interface nxopen.cam.NcmHoleMachining

License requirements: cam_base ("CAM BASE")
.

setNumberOfTools(int) - Method in interface nxopen.cam.MachinePocketGroupBuilder

License requirements: cam_base ("CAM BASE")
.

setNumberOfTools(int) - Method in interface nxopen.sim.KinematicComponentBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setNumberOfTurns(String) - Method in interface nxopen.features.HelixBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setNumberOfUPoints(int) - Method in interface nxopen.cam.InspectionSurfaceFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setNumberOfValidPoints(int) - Method in interface nxopen.cam.InspectionUVGridBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setNumberOfVPoints(int) - Method in interface nxopen.cam.InspectionSurfaceFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setNumberPolesSelected(int) - Method in interface nxopen.features.PoleSmoothingBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setNumberRequiredFaceSets(int) - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. Use WeldGrooveBuilder.singleFaceSet() and WeldGrooveBuilder.setSingleFaceSet(boolean) instead.

setNumberRootDepth(String) - Method in interface nxopen.annotations.LineWeldDataBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setNumberSegments(int) - Method in interface nxopen.weld.WeldJointBuilder

License requirements: structure_weld ("STRUCTURE WELD")
.

setNumberSelectable(int) - Method in interface nxopen.blockstyler.ObjectColorPicker

License requirements: None.

setNumberString(String) - Method in interface nxopen.linedesigner.InsertSheetBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setNumberSubMeshes(int) - Method in interface nxopen.tooling.FlowDisplayBuilder

License requirements: ug_mold_design ("UG MOLD")
.

setNumberSurfaceVectors(int) - Method in interface nxopen.weld.EasyPatternBuilder

License requirements: ugweld ("UG WELD")
.

setNumberToggle(boolean) - Method in interface nxopen.cam.ToolChangeCiBuilder

License requirements: cam_base ("CAM BASE")
.

setNumberUcheckPoints(int) - Method in interface nxopen.geometricanalysis.DeviationChecking

License requirements: None.

setNumberValue(double) - Method in interface nxopen.annotations.PmiAttributeValueNumberBuilder

License requirements: None.

setNumberValue(double) - Method in interface nxopen.annotations.PmiNumberBuilder

License requirements: None.

setNumberValue(double) - Method in interface nxopen.AttributePropertiesBaseBuilder

License requirements: None.

setNumberValue(double) - Method in interface nxopen.display.CgfxAttributeValueNumberBuilder

Deprecated.

Deprecated in NX10.0.0. No alternative provided for this class.

setNumberVcheckPoints(int) - Method in interface nxopen.geometricanalysis.DeviationChecking

License requirements: None.

setNumChar(int) - Method in interface nxopen.cam.InspectionCmmCommandBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setNumCopy(int) - Method in interface nxopen.cae.ElementTranslateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setNumCopy(int) - Method in interface nxopen.cae.NodeRotateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setNumCopy(int) - Method in interface nxopen.cae.NodeTranslateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setNumCornerSides(int) - Method in interface nxopen.features.StyledCornerBuilder

Set number of sides of the corner
License requirements: studio_free_form ("STUDIO FREE FORM")
.

setNumCurrentDirectionMapElements(int) - Method in interface nxopen.annotations.HatchBuilder

Set number of direction map elements to the annotation
License requirements: drafting ("DRAFTING")
.

setNumElements(int) - Method in interface nxopen.cae.ContactMeshBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setNumElementsOnRail1(int) - Method in interface nxopen.cae.MeshFromBoundaryBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setNumElementsOnRail2(int) - Method in interface nxopen.cae.MeshFromBoundaryBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setNumerator(double) - Method in interface nxopen.drawings.ViewScaleBuilder

License requirements: drafting ("DRAFTING")
.

setNumerator(int) - Method in interface nxopen.features.shipdesign.SectionEditorBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setNumeratorDegrees(int) - Method in interface nxopen.annotations.UnitsFormatPreferences

License requirements: None.

setNumeratorDegrees(int) - Method in interface nxopen.annotations.UnitsStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setNumeratorFraction(double) - Method in interface nxopen.annotations.UnitsFormatPreferences

License requirements: None.

setNumeratorFraction(double) - Method in interface nxopen.annotations.UnitsStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setNumeratorMinutes(int) - Method in interface nxopen.annotations.UnitsFormatPreferences

License requirements: None.

setNumeratorMinutes(int) - Method in interface nxopen.annotations.UnitsStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setNumeratorSeconds(int) - Method in interface nxopen.annotations.UnitsFormatPreferences

License requirements: None.

setNumeratorSeconds(int) - Method in interface nxopen.annotations.UnitsStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setNumInter(int) - Method in interface nxopen.tooling.DirectUnfoldBuilder

License requirements: None.

setNumLayers(int) - Method in interface nxopen.cae.SweepBetweenMeshBuilder

Deprecated.

Deprecated in NX10.0.0. Use CAE.Mesh3dHexBuilder .

setNumMeshpoints(int) - Method in interface nxopen.cae.MeshPointMultipleOnCurveBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setNumMinMax(int) - Method in interface nxopen.cae.PostAnnotationBuilder

Set the number of min/max annotation for min/max type of annotation
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setNumNodes(int) - Method in interface nxopen.cae.NodesBetweenNodesBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setNumNodes(int) - Method in interface nxopen.cae.NodesOnCurveBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setNumOfBc(int) - Method in interface nxopen.cae.BcLabelManagerBuilder

License requirements: None.

setNumOfCopyInstance(int) - Method in interface nxopen.cam.InspectionOperationTransformBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setNumOfCopyInstance(int) - Method in interface nxopen.cam.OperationTransformBuilder

License requirements: cam_base ("CAM BASE")
.

setNumOfElements(int) - Method in interface nxopen.cae.MeshControlBuilder

Sets the number of elements defined on edge.

setNumOfSegments(int) - Method in interface nxopen.features.subdivision.SubdivisionRevolveBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setNumSegments(int) - Method in interface nxopen.features.subdivision.SubdivisionBridgeFaceBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setNumSmoothIterations(int) - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setNumTabs(int) - Method in interface nxopen.cam.WedmBasedGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setNumTabs(int) - Method in interface nxopen.cam.WedmGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setNumTabs(int) - Method in interface nxopen.cam.WedmOperationBuilder

License requirements: cam_base ("CAM BASE")
.

setNumTriaxialSensors(int) - Method in interface nxopen.cae.PreTestSensorConfigBuilder

License requirements: nx_correl_base ("FE Correlation")
.

setNumUniaxialSensors(int) - Method in interface nxopen.cae.PreTestSensorConfigBuilder

License requirements: nx_correl_base ("FE Correlation")
.

setNumVents(int) - Method in interface nxopen.features.shipdesign.SteelVentHolesBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setNurbAngleTolerance(double) - Method in interface nxopen.cam.ArcOutputTypeCiBuilder

License requirements: cam_base ("CAM BASE")
.

setNurbFitTolerance(double) - Method in interface nxopen.cam.ArcOutputTypeCiBuilder

License requirements: cam_base ("CAM BASE")
.

setNurbJoinSegments(boolean) - Method in interface nxopen.cam.ArcOutputTypeCiBuilder

License requirements: cam_base ("CAM BASE")
.

setNutSelectionType(BoltBuilder.Selection) - Method in interface nxopen.cae.BoltBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setNutSpiderScale(double) - Method in interface nxopen.cae.BoltBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setNutSpiderType(BoltBuilder.SpiderDiameter) - Method in interface nxopen.cae.BoltBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setNValue(int) - Method in interface nxopen.cae.ElementSplitBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setNxClassesEnabled(Tag, boolean) - Method in interface nxopen.uf.UFKf

Refer to UF_KF_set_nx_classes_enabled for documentation.

setNxColorValue(int) - Method in interface nxopen.routing.electrical.ElectricalStockDevice

Sets the NX color value.

setNxEquivalent(NXObject) - Method in interface nxopen.routing.SingleDevice

Sets the NX equivalent object.

setNxFontCharacterSpaceFactor(CharacterSpaceFactor) - Method in interface nxopen.preferences.AnnotationPreferences

Sets the NX font text space factor for each text type (dimension,general,appended,tolerance) for the part
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setNxLabel(String) - Method in interface nxopen.ListCreator

License requirements: None.

setNXOpenObjectApplicationKey(NXObject) - Method in interface nxopen.features.TrackingData

Sets the optional application key of NXOpen::Object type for tracked entity
License requirements: solid_modeling ("SOLIDS MODELING")
.

setNxto2dSettingsFile(String) - Method in interface nxopen.NXTo2dCreator

License requirements: None.

setObject(ComponentPattern) - Method in interface nxopen.assemblies.ComponentPatternBuilder

Sets the object selected for pattern definition
License requirements: assemblies ("ASSEMBLIES MODULE")
.

SetObject - Class in nxopen.cae

Structure used to pass objects into SetManager and CAESet

SetObject() - Constructor for class nxopen.cae.SetObject

SetObject(TaggedObject, CaeSetObjectSubType, int) - Constructor for class nxopen.cae.SetObject

Constructor for the SetObject object.

setObject(String, NXObject) - Method in interface nxopen.cam.CAMObject

Set a object to the parameter index for the object.

setObject(NXObject) - Method in interface nxopen.motion.GraphBuilder

Deprecated.

Deprecated in NX11.0.0. Use Motion.GraphObjectBuilder instead.

setObjectArrayValue(String, NXObject[]) - Method in interface nxopen.cam.CAMObject

Set object array to the parameter index for the object
License requirements: cam_base ("CAM BASE")
.

setObjectClearZone(Tag, Tag, Tag) - Method in interface nxopen.uf.UFClear

Deprecated.

The equivalent Open C method has retired

setObjectCreateBuilder(ObjectCreateBuilder) - Method in interface nxopen.drafting.DrawingCreationWizardBuilder

Sets ObjectCreateBuilder
License requirements: nx_drawing_auto ("NX Drawing Automation")

Created in NX10.0.0

setObjectCreateBuilder(ObjectCreateBuilder) - Method in interface nxopen.features.vehicledesign.BaseDataImportExportBuilder

Sets ObjectCreateBuilder
License requirements: gateway ("UG GATEWAY")

Created in NX10.0.0

setObjectDescription(String) - Method in interface nxopen.features.PartGeometryCopySelectBuilder

License requirements: gateway ("UG GATEWAY")
.

setObjectGroupName(String) - Method in interface nxopen.tooling.ReusableObject

License requirements: None.

setObjectId(String) - Method in interface nxopen.linedesigner.ReuseLibraryDragData

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setObjectiveGoal(Goal) - Method in interface nxopen.cae.optimization.DAOObjective

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setObjectives(TBSSingleObjective[]) - Method in interface nxopen.cae.optimization.TBSObjectives

Sets the design response
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setObjectLevel(Tag, String) - Method in interface nxopen.uf.UFRoute

Deprecated.

The equivalent Open C method has retired

setObjectName(String) - Method in interface nxopen.features.PartGeometryCopySelectBuilder

License requirements: gateway ("UG GATEWAY")
.

setObjectName(String) - Method in interface nxopen.mechatronics.FunctionObjectBuilder

Deprecated.

Deprecated in NX8.5.0. Please use ObjectInformationBuilder instead.

setObjectName(String) - Method in interface nxopen.mechatronics.SensorsActuatorsListBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setObjectNameDisplay(PartVisualizationNamesBorders.NameDisplay) - Method in interface nxopen.preferences.PartVisualizationNamesBorders

Sets the object name display
License requirements: None.

setObjectOffWorkPlane(SessionWorkPlane.ObjectDisplay) - Method in interface nxopen.preferences.SessionWorkPlane

Deprecated.

Deprecated in NX8.5.0. See SessionVisualizationEmphasis .

setObjectPicker(AttributePropertiesBaseBuilder.ObjectOptions) - Method in interface nxopen.AttributePropertiesBaseBuilder

Deprecated.

Deprecated in NX10.0.0. Use AttributePropertiesBaseBuilder.setAttributeObjects(nxopen.NXObject[]) instead.

setObjectPosition(WheelFixingBuilder.ObjectPositionType) - Method in interface nxopen.features.vehicledesign.WheelFixingBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setObjectPreferences(Tag, int[], double[], String, String) - Method in interface nxopen.uf.UFDrf

Refer to UF_DRF_set_object_preferences for documentation.

setObjects(NXObject[]) - Method in interface nxopen.annotations.AssociatedObject

Sets the objects.

setObjects(NXObject[]) - Method in interface nxopen.features.subdivision.CopyCageData

Sets the objects to be copied.

setObjects(TaggedObject[]) - Method in interface nxopen.features.UserDefinedFeatureApplicationField

Sets all of the objects in this field
License requirements: None.

setObjects(NXObject[]) - Method in interface nxopen.gateway.CopyCutBuilder

Sets all objects to be copied or to be cut
License requirements: None.

setObjects(NXObject[]) - Method in interface nxopen.routing.DesignRuleViolation

Sets the array of objects in violation
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setObjects(NXObject[]) - Method in interface nxopen.tooling.ReusableObject

Sets the objects
License requirements: None.

setObjects(TaggedObject[]) - Method in interface nxopen.weld.WeldAdvisorBuilder

Sets the objects to be checked
License requirements: ugweld ("UG WELD")
.

setObjectSelectionOption(BridgeCurveBuilder.SelectedObject) - Method in interface nxopen.features.BridgeCurveBuilder

Deprecated.

Deprecated in NX8.5.0. Use BridgeCurveBuilderEx instead.

setObjectsOffSketchWorkPlaneNonSelectable(boolean) - Method in interface nxopen.preferences.SessionVisualizationEmphasis

Sets the setting that controls whether or not objects off the work plane are non-selectable in the Sketch Task Environment.

setObjectsOffWcsWorkPlaneNonSelectable(boolean) - Method in interface nxopen.preferences.SessionVisualizationEmphasis

Sets the setting that controls whether or not objects off the WCS work plane are non-selectable.

setObjectsToCopy(NXObject[]) - Method in interface nxopen.mechatronics.ObjectSourceBuilder

Sets the objects to be copied.

setObjectsVisibilityOnLayer(View, StateInfo[], boolean) - Method in interface nxopen.layer.LayerManager

Sets specified layer(s) visibility in a specified view.

setObjectType(OnestepUnformBuilder.Object) - Method in interface nxopen.bodydes.OnestepUnformBuilder

License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setObjectType(DraftingComponentSelectionBuilder.Geometry) - Method in interface nxopen.drawings.DraftingComponentSelectionBuilder

License requirements: None.

setObjectType(DrawingRegionBuilder.RegionDraftingObjectType) - Method in interface nxopen.drawings.DrawingRegionBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setObjectType(PartGeometryCopyBuilder.Type) - Method in interface nxopen.features.PartGeometryCopyBuilder

License requirements: gateway ("UG GATEWAY")
.

setObjectType(String) - Method in interface nxopen.features.PartGeometryCopySelectBuilder

License requirements: gateway ("UG GATEWAY")
.

setObjectType(CopyObjectsBuilder.Type) - Method in interface nxopen.features.shipdesign.CopyObjectsBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setObjectType(QuickQuotationBuilder.ObjectTypes) - Method in interface nxopen.tooling.QuickQuotationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setObjectTypes(NXObject[]) - Method in interface nxopen.features.shipdesign.ShipNamesListBuilder

Sets the current list of ShipNamesBuilder objects to the types determined by the types of the supplied objects.

setObjectTypesOfVisualReport(VisualReport.ObjectTypeOption[]) - Method in interface nxopen.visualreporting.VisualReportBuilder

Sets the VisualReport.ObjectTypeOption s of the VisualReport being built by this builder.

setObjectValue(NXObject) - Method in interface nxopen.mechatronics.GanttOperationConditionBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setObjectValue(NXObject) - Method in interface nxopen.mechatronics.GanttOperationParameterBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setObjectView(View) - Method in interface nxopen.annotations.Associativity

Sets the object view.

setObjList(Tag, int, int, int, Tag[]) - Method in interface nxopen.uf.UFClear

Deprecated.

The equivalent Open C method has retired

setObjSelectType(ValidCheckBuilder.SelMode) - Method in interface nxopen.tooling.ValidCheckBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setObjtype1(MeasureAngleBuilder.ObjectType) - Method in interface nxopen.MeasureAngleBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setObjtype2(MeasureAngleBuilder.ObjectType) - Method in interface nxopen.MeasureAngleBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setObliqueExtensionLineAngle(double) - Method in interface nxopen.annotations.LineAndArrowPreferences

Sets the oblique extension line angle
License requirements: None.

setObliqueExtensionLineAngle(double) - Method in interface nxopen.annotations.LineArrowStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setObservationNode(FENode) - Method in interface nxopen.cae.responsesimulation.ModalResultsEvaluationSettingBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setObservationNode(FENode) - Method in interface nxopen.cae.responsesimulation.PrlResultsEvaluationSettingBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setObstructedColor(NXColor) - Method in interface nxopen.features.vehicledesign.AllAroundVisionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setOccupant(HumanPosturePredictionBuilder.OccupantType) - Method in interface nxopen.HumanPosturePredictionBuilder

License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setOccurrence(int, int) - Method in interface nxopen.cae.DurabilityDamageEvaluationBuilder

Sets the number of Occurrences.

setOccurrenceChainable(RoutingPath.OccChainable) - Method in interface nxopen.preferences.RoutingPath

License requirements: routing_base ("Routing Basic")
.

setOccurrenceName(String) - Method in interface nxopen.linedesigner.RenameItemRevisionBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setOccurrences(NXObject[]) - Method in interface nxopen.mechatronics.FunctionObjectBuilder

Sets the occurrences
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setOffAxisAngleChoice(PreTestExciterConfigBuilder.OffAxisAngleChoiceType) - Method in interface nxopen.cae.PreTestExciterConfigBuilder

License requirements: nx_correl_base ("FE Correlation")
.

setOffset(double) - Method in interface nxopen.cae.DurabilityFunctionExcitationBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setOffset(double) - Method in interface nxopen.cae.DurabilityLoadPatternBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setOffset(int) - Method in interface nxopen.cae.ElementModifyLabelBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setOffset(int) - Method in interface nxopen.cae.ElementProjectBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setOffset(int) - Method in interface nxopen.cae.ElementReflectBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setOffset(int) - Method in interface nxopen.cae.ElementTranslateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setOffset(int) - Method in interface nxopen.cae.LaminateRelabelPliesBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setOffset(int) - Method in interface nxopen.cae.NodeModifyLabelBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setOffset(int) - Method in interface nxopen.cae.NodeProjectBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setOffset(int) - Method in interface nxopen.cae.NodeReflectBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setOffset(int) - Method in interface nxopen.cae.NodeRotateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setOffset(int) - Method in interface nxopen.cae.NodeTranslateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setOffset(double) - Method in interface nxopen.cam.BoundaryMemberSet

License requirements: cam_base ("CAM BASE")
.

setOffset(double) - Method in interface nxopen.cam.BoundarySet

License requirements: cam_base ("CAM BASE")
.

setOffset(double) - Method in interface nxopen.die.FlangeSteelRibChildBuilder

Sets the offset of the Flange Steel Rib
License requirements: ug_die_design ("Die Design")
.

setOffset(double) - Method in interface nxopen.die.FlangeSteelRibParentBuilder

Sets the offset of the Flange Steel Ribs
License requirements: ug_die_design ("Die Design")
.

setOffset(double) - Method in interface nxopen.die.KeywayChildBuilder

Sets the offset of the keyway.

setOffset(double) - Method in interface nxopen.display.DynamicSectionBuilder

Sets the the plane offset.

setOffset(double) - Method in interface nxopen.display.Stage

Deprecated.

Deprecated in NX10.0.0. This functionality is no longer supported.

setOffset(double) - Method in interface nxopen.drawings.SectionLineStyleBuilder

Deprecated.

Deprecated in NX10.0.0. Use ViewSectionLineBuilder.setUseOffset(boolean) instead.

setOffset(double) - Method in interface nxopen.drawings.ViewPlacementBuilder

License requirements: drafting ("DRAFTING")
.

setOffset(boolean) - Method in interface nxopen.drawings.ViewStyleDetailBuilder

License requirements: drafting ("DRAFTING")
.

setOffset(boolean) - Method in interface nxopen.drawings.ViewStyleProjectedBuilder

License requirements: drafting ("DRAFTING")
.

setOffset(boolean) - Method in interface nxopen.drawings.ViewStyleSectionConstraintsBuilder

License requirements: drafting ("DRAFTING")
.

setOffset(String) - Method in interface nxopen.features.sheetmetal.FlangeBuilder

Deprecated.

Deprecated in NX10.0.0. Use Expression.setRightHandSide(java.lang.String) on the Expression object returned from FlangeBuilder.offset() instead.

setOffset(double) - Method in interface nxopen.features.shipdesign.SectionViewBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setOffset(double) - Method in interface nxopen.geometricanalysis.sectionanalysis.CurveAlignedBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setOffset(double) - Method in interface nxopen.geometricanalysis.sectionanalysis.ParallelPlanesExBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setOffset(double) - Method in interface nxopen.geometricanalysis.sectionanalysis.RadialBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setOffset(String) - Method in interface nxopen.geometricutilities.FaceSetOffset

Deprecated.

Deprecated in NX8.5.0. To set the value of the expression modify the expression directly using GeometricUtilities.FaceSetOffset#offset and Expression.setRightHandSide(java.lang.String) .

setOffset(Expression) - Method in interface nxopen.routing.CrossSection

Sets the offset expression applied to the profile when generating a Sweep.

setOffsetAngle(double) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder

License requirements: None.

setOffsetBetweenDiagrams(double) - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setOffsetByPoint(Point3d) - Method in interface nxopen.display.DynamicSectionBuilder

This method offsets the active clipping plane such that the plane passes through the specified point.

setOffsetCurveCount(int) - Method in interface nxopen.features.shipdesign.TraceLinesBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setOffsetCurves(Section) - Method in interface nxopen.features.Offset3DCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setOffsetDirection(boolean) - Method in interface nxopen.cam.OffsetDataBuilder

License requirements: None.

setOffsetDirection(boolean) - Method in interface nxopen.features.GeodesicOffsetBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setOffsetDirection(boolean) - Method in interface nxopen.features.VarOffsetFaceBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setOffsetDirection(boolean) - Method in interface nxopen.geometricutilities.SelectDividingObjectBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setOffsetDirection(Direction) - Method in interface nxopen.tooling.SlugRetentionBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setOffsetDirectionOption(AOCSBuilder.OffsetDirection) - Method in interface nxopen.features.AOCSBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.

setOffsetDist(double) - Method in interface nxopen.cam.InspectionMeasDataBuilder

License requirements: None.

setOffsetDistance(double) - Method in interface nxopen.annotations.Centerline2dBuilder

License requirements: drafting ("DRAFTING")
.

setOffsetDistance(double) - Method in interface nxopen.annotations.Centerline3dBuilder

License requirements: drafting ("DRAFTING")
.

setOffsetDistance(double) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setOffsetDistance(double) - Method in interface nxopen.cam.OffsetDataBuilder

License requirements: None.

setOffsetDistance(double) - Method in interface nxopen.die.OutputCurvesBuilder

Sets the offset distance
License requirements: die_engineering ("DIE ENGINEERING")
.

setOffsetDistance(double) - Method in interface nxopen.tooling.OffsetCurve3DBuilder

Deprecated.

Deprecated in NX10.0.0. Please use Offset3DCurveBuilder.offsetDistance() instead

setOffsetDistance(double) - Method in interface nxopen.tooling.SlugRetentionBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setOffsetDistance(String) - Method in interface nxopen.weld.WeldPointBuilder

License requirements: ugweld ("UG WELD")
.

setOffsetDistanceFromEdge(double) - Method in interface nxopen.weld.AutoPointBuilder

License requirements: ugweld ("UG WELD")
.

setOffsetDistType(AOCSBuilder.OffsetDistanceType) - Method in interface nxopen.features.AOCSBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.

setOffsetEnabled(boolean) - Method in interface nxopen.features.CurveFinderBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setOffsetEnabled(boolean) - Method in interface nxopen.features.FaceRecognitionBuilder

License requirements: gateway ("UG GATEWAY")
.

setOffsetExpression(String) - Method in interface nxopen.IPlane

Sets the plane offset expression value.

setOffsetExpression(Expression) - Method in interface nxopen.IPlane

License requirements: None.

setOffsetFileName(String) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setOffsetFlip(boolean) - Method in interface nxopen.IPlane

Sets the flip state of the offset direction of the plane
License requirements: None.

setOffsetFromPart(double) - Method in interface nxopen.cam.GeometryGroup

License requirements: cam_base ("CAM BASE")
.

setOffsetInstance(boolean) - Method in interface nxopen.features.DatumPlaneBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setOffsetIntent(ParamValueIntent) - Method in interface nxopen.cam.BoundarySet

License requirements: cam_base ("CAM BASE")
.

setOffsetMethod(Centerline2dBuilder.Offset) - Method in interface nxopen.annotations.Centerline2dBuilder

License requirements: drafting ("DRAFTING")
.

setOffsetMethod(Centerline3dBuilder.Offset) - Method in interface nxopen.annotations.Centerline3dBuilder

License requirements: drafting ("DRAFTING")
.

setOffsetMethod(OffsetCenterPointBuilder.Offset) - Method in interface nxopen.annotations.OffsetCenterPointBuilder

License requirements: drafting ("DRAFTING")
.

setOffsetMethod(ConvexMeshBuilder.OffsetMethodOption) - Method in interface nxopen.cae.ConvexMeshBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setOffsetMethod(WeldBeadPathBuilder.OffsetMethodType) - Method in interface nxopen.weld.WeldBeadPathBuilder

License requirements: ugweld ("UG WELD")
.

setOffsetMethodType(BeamSectionOffsetOptions.Method) - Method in interface nxopen.cae.BeamSectionOffsetOptions

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setOffsetMode(AOCSBuilder.OffsetType) - Method in interface nxopen.features.AOCSBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.

setOffsetNegativeX(double) - Method in interface nxopen.tooling.StockSizeBuilder

License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setOffsetNegativeY(double) - Method in interface nxopen.tooling.StockSizeBuilder

License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setOffsetNegativeZ(double) - Method in interface nxopen.cam.GeometryGroup

License requirements: cam_base ("CAM BASE")
.

setOffsetNegativeZ(double) - Method in interface nxopen.tooling.StockSizeBuilder

License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setOffsetNumber(int) - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setOffsetOfOffset(Tag, double[]) - Method in interface nxopen.uf.UFSo

Refer to UF_SO_set_offset_of_offset for documentation.

setOffsetOption(PlateChamferBuilder.OffsetMethod) - Method in interface nxopen.features.shipdesign.PlateChamferBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setOffsetOrientations(double[]) - Method in interface nxopen.motion.FlexBodyBuilder

Sets the offset orientations
License requirements: mechanisms ("MECHANISMS")
.

setOffsetPathSegments(ISegment[]) - Method in interface nxopen.routing.OffsetPath

The path segments for an offset object.

setOffsetPlane(Plane) - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setOffsetPoints(double[]) - Method in interface nxopen.motion.FlexBodyBuilder

Sets the offset points
License requirements: mechanisms ("MECHANISMS")
.

setOffsetPosition(Point3d) - Method in interface nxopen.annotations.OffsetCenterPointBuilder

License requirements: drafting ("DRAFTING")
.

setOffsetPosition(Point3d) - Method in interface nxopen.tooling.StandardPartPositionBuilder

The offset point position.

setOffsetPositiveX(double) - Method in interface nxopen.tooling.StockSizeBuilder

License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setOffsetPositiveY(double) - Method in interface nxopen.tooling.StockSizeBuilder

License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setOffsetPositiveZ(double) - Method in interface nxopen.cam.GeometryGroup

License requirements: cam_base ("CAM BASE")
.

setOffsetPositiveZ(double) - Method in interface nxopen.tooling.StockSizeBuilder

License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setOffsetProfileToTop(double) - Method in interface nxopen.die.DrawDiePunchSectionBuilder

License requirements: ug_die_design ("Die Design")
.

setOffsetProfileToTop(String) - Method in interface nxopen.die.SteelInsertSectionBuilder

License requirements: ug_die_design ("Die Design")
.

setOffsetRadius(AeroJoggleBuilder.SideType, String) - Method in interface nxopen.features.sheetmetal.AeroJoggleBuilder

Set the offset radius expression.

setOffsetRadius(boolean, String) - Method in interface nxopen.preferences.PartSheetmetal

THE offset radius
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setOffsetReferenceAxes(Point3d, Vector3d, Vector3d) - Method in interface nxopen.routing.OffsetPath

The reference axes for an offset object.

setOffsetRelations(boolean) - Method in interface nxopen.features.ShowRelatedFacesBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setOffsetReverseDirection(boolean) - Method in interface nxopen.features.ReplaceFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setOffsetSections(double[]) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

Indicate the sections that should be offset.

setOffsetSketchGroupEnabled(boolean) - Method in interface nxopen.features.CurveFinderBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setOffsetSpacingMode(StiffenerSystemBuilder.OffsetSpacingModes) - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setOffsetSpecified(boolean) - Method in interface nxopen.cae.BeamSectionOffsetOptions

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setOffsetType(OffsetDataBuilder.OffsetDirectionMethod) - Method in interface nxopen.cam.OffsetDataBuilder

License requirements: None.

setOffsetType(VerticalPosition.OffsetTypes) - Method in interface nxopen.cam.VerticalPosition

License requirements: cam_base ("CAM BASE")
.

setOffsetType(FlangeBuilder.OffsetTypeOptions) - Method in interface nxopen.features.sheetmetal.FlangeBuilder

Sets the offset type for the flange.

setOffsetType(ExcessMaterialBuilder.Offset) - Method in interface nxopen.features.shipdesign.ExcessMaterialBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setOffsetType(TraceLinesBuilder.TraceLineType) - Method in interface nxopen.features.shipdesign.TraceLinesBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setOffsetValue(double) - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setOffsetValue(double) - Method in interface nxopen.tooling.DieDesignLowerBinderBuilder

License requirements: ug_die_design ("Die Design")
.

setOffsetValue(String) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder

License requirements: None.

setOffsetValueForMargin(double) - Method in interface nxopen.tooling.AutoDimensionBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setOffsetValues(int, double[]) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

Set the values of the offset for the specified section.

setOffsetVector(Direction) - Method in interface nxopen.cae.WeldBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setOffsetVector(Direction) - Method in interface nxopen.cam.OffsetDataBuilder

License requirements: None.

setOffsetVector(Vector3d) - Method in interface nxopen.routing.OffsetPath

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setOffsetView(Direction) - Method in interface nxopen.features.RibbonBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setOffsetViewDirection(Direction) - Method in interface nxopen.features.Offset3DCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setOffsetViewDirection(Direction) - Method in interface nxopen.tooling.OffsetCurve3DBuilder

Deprecated.

Deprecated in NX10.0.0. Please use Offset3DCurveBuilder.setOffsetViewDirection(nxopen.Direction) instead

setOffsetX(double) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder

License requirements: None.

setOffsetY(double) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder

License requirements: None.

setOk(boolean) - Method in interface nxopen.geometricutilities.FacePlaneSelectionBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setOldStringInName(String) - Method in interface nxopen.tooling.RenameAndExportComponentBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setOmitLastPass(boolean) - Method in interface nxopen.cam.TurnCutParameters

License requirements: cam_base ("CAM BASE")
.

setOmitPartiallyMapped(boolean) - Method in interface nxopen.cae.LaminateImportedLayupBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setOmitReversals(boolean) - Method in interface nxopen.cam.RoughFinishTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setOmittedAttributes(CharacteristicList) - Method in interface nxopen.routing.TransformPathBuilder

Set attributes to be omitted.

setOnBeginLabelEditHandler(Tree.OnBeginLabelEditCallback) - Method in interface nxopen.blockstyler.Tree

Sets the on-begin-label-edit callback
License requirements: None.

setOnDefaultActionHandler(Tree.OnDefaultActionCallback) - Method in interface nxopen.blockstyler.Tree

Sets the on select node callback
License requirements: None.

setOnDeleteNodeHandler(Tree.OnDeleteNodeCallback) - Method in interface nxopen.blockstyler.Tree

Sets on delete node callback
License requirements: None.

setOnDropHandler(Tree.OnDropCallback) - Method in interface nxopen.blockstyler.Tree

Sets the callback handler for node drop
License requirements: None.

setOnDropMenuHandler(Tree.OnDropMenuCallback) - Method in interface nxopen.blockstyler.Tree

Sets the callback handler for on drop menu.

setOnEditOptionSelectedHandler(Tree.OnEditOptionSelectedCallback) - Method in interface nxopen.blockstyler.Tree

Sets the on-end-label-edit callback
License requirements: None.

setOneEdgeSelector(Edge) - Method in interface nxopen.geometricutilities.RegionTracker

An input target or tool edge used to identify the region
License requirements: solid_modeling ("SOLIDS MODELING")
.

setOneFaceSelector(Face) - Method in interface nxopen.geometricutilities.RegionTracker

An input target or tool face used to identify the region
License requirements: solid_modeling ("SOLIDS MODELING")
.

setOnEndLabelEditHandler(Tree.OnEndLabelEditCallback) - Method in interface nxopen.blockstyler.Tree

Sets the on-end-label-edit callback
License requirements: None.

setOnePointSelector(Point3d) - Method in interface nxopen.geometricutilities.RegionTracker

The input point location (x,y,z) used to identify the region
License requirements: solid_modeling ("SOLIDS MODELING")
.

setOneToOne(boolean) - Method in interface nxopen.geometricutilities.ReplAsstBuilder

License requirements: None.

setOneVertexSelector(Edge, RegionTracker.ExtremityType) - Method in interface nxopen.geometricutilities.RegionTracker

One input target or tool vertex (edge extremity) used to identify the region
License requirements: solid_modeling ("SOLIDS MODELING")
.

setOnExpandHandler(Tree.OnExpandCallback) - Method in interface nxopen.blockstyler.Tree

Sets the on expand callback to the tree.

setOnFacePlacementMethod(TextBuilder.OnFacePlacementMethodOptions) - Method in interface nxopen.features.TextBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setOnInsertColumnHandler(Tree.OnInsertColumnCallback) - Method in interface nxopen.blockstyler.Tree

Sets the on insert column callback to the tree.

setOnInsertNodeHandler(Tree.OnInsertNodeCallback) - Method in interface nxopen.blockstyler.Tree

Sets the on insert node callback.

setOnLegacyViewUpdate(boolean) - Method in interface nxopen.drawings.ViewWorkflowBuilder

License requirements: drafting ("DRAFTING")
.

setOnlyCheckHoleFace(boolean) - Method in interface nxopen.tooling.FaceColorManagementBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setOnlyImportDesignParts(boolean) - Method in interface nxopen.preferences.SessionNXGateway

Sets the only import design parts flag for Solid Edge.

setOnMenuHandler(Tree.OnMenuCallback) - Method in interface nxopen.blockstyler.Tree

Sets the on menu callback
License requirements: None.

setOnMenuHandler(Wizard.OnMenuCallback) - Method in interface nxopen.blockstyler.Wizard

Sets the OnMenu handler.

setOnMenuSelectionHandler(Tree.OnMenuSelectionCallback) - Method in interface nxopen.blockstyler.Tree

Sets the on menu selection callback
License requirements: None.

setOnMenuSelectionHandler(Wizard.OnMenuSelectionCallback) - Method in interface nxopen.blockstyler.Wizard

Sets the OnMenuSelection handler.

setOnPreSelectHandler(Tree.OnPreSelectCallback) - Method in interface nxopen.blockstyler.Tree

Sets on pre select callback
License requirements: None.

setOnSelectHandler(Tree.OnSelectCallback) - Method in interface nxopen.blockstyler.Tree

Sets the on select node callback
License requirements: None.

setOnStateChangeHandler(Tree.OnStateChangeCallback) - Method in interface nxopen.blockstyler.Tree

Sets the on state change callback.

setOnSubNodeHandler(Wizard.OnSubNodeCallback) - Method in interface nxopen.blockstyler.Wizard

Sets the OnSubNode handler.

setOnTool(boolean) - Method in interface nxopen.geometricutilities.RegionTracker

License requirements: solid_modeling ("SOLIDS MODELING")
.

setOnViewSelection(boolean) - Method in interface nxopen.drawings.ViewWorkflowBuilder

License requirements: drafting ("DRAFTING")
.

setOP1Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setOP1Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarWizardBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setOP1LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setOP1Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setOP1Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarWizardBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setOP1RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setOP2Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setOP2LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setOp2OutputOption(TBSOutputControlOptions.Op2Option) - Method in interface nxopen.cae.optimization.TBSOutputControlOptions

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setOP2Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setOP2RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setOpcFileBrowser(String) - Method in interface nxopen.mechatronics.OPCClientBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setOPCServerName(String) - Method in interface nxopen.mechatronics.SignalConnectionBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setOPCSignalAccess(OPCClientBuilder.TagAccess) - Method in interface nxopen.mechatronics.SignalConnectionBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setOPCSignalName(String) - Method in interface nxopen.mechatronics.SignalConnectionBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setOPCSignalType(SignalConnectionBuilder.DataType) - Method in interface nxopen.mechatronics.SignalConnectionBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setOpenAfterCreation(boolean) - Method in interface nxopen.routing.IsoDrawingBuilder

License requirements: None.

setOpenDist(double) - Method in interface nxopen.tooling.DieBaseBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setOpenField(String[]) - Method in interface nxopen.annotations.MaterialSpecificationBuilder

Sets the open field
License requirements: None.

setOpenField(String[]) - Method in interface nxopen.annotations.ProcessSpecificationBuilder

Sets the open field
License requirements: None.

setOpenFile(boolean) - Method in interface nxopen.cam.InspectionGraphicalReportOutputBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setOpenFile(boolean) - Method in interface nxopen.cam.WorkInstructionOutputBuilder

License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.

setOpeningAddGate(boolean) - Method in interface nxopen.linedesigner.RailOpeningFeatureBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setOpeningStyleEnum(GateFeatureBuilder.GateOpeningStyle) - Method in interface nxopen.linedesigner.GateFeatureBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setOpeningStyleEnum(RailOpeningFeatureBuilder.GateOpeningStyle) - Method in interface nxopen.linedesigner.RailOpeningFeatureBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setOpenPassword(String, String) - Method in interface nxopen.PartCollection

Input password for opening the part.

setOpenProfileSmartVolumeOption(boolean) - Method in interface nxopen.geometricutilities.SmartVolumeProfileBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setOpenReportDocumentAfterExport(boolean) - Method in interface nxopen.report.ReportPreference

License requirements: None.

setOpenSignalFunction(Function) - Method in interface nxopen.motion.SignalChartBuilder

Sets the open signal function
License requirements: nx_motion_motor ("NX Motion Motor")
.

setOpenUnloadedParents(LoadInterpartDataBuilder.OpenUnloadedParentsType) - Method in interface nxopen.assemblies.LoadInterpartDataBuilder

License requirements: wave ("WAVE FUNCTIONALITY")
.

setOperateOption(BaseDataImportExportBuilder.OperateOptions) - Method in interface nxopen.features.vehicledesign.BaseDataImportExportBuilder

License requirements: gateway ("UG GATEWAY")
.

setOperation(ResultMeasure.Operation) - Method in interface nxopen.cae.ResultMeasureResultOptions

Set the operation type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setOperation(ResultsEnvelopeBuilder.Operation) - Method in interface nxopen.cae.ResultsEnvelopeBuilder

The operation
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setOperation(Feature.BooleanType) - Method in interface nxopen.features.BooleanBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setOperation(ColorFeatureGroupBuilder.OperationType) - Method in interface nxopen.features.ColorFeatureGroupBuilder

License requirements: None.

setOperation(TrimAndExtendBuilder.OperationType) - Method in interface nxopen.features.TrimAndExtendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setOperation(PatternIncrementItem.OperationEnum) - Method in interface nxopen.geometricutilities.PatternIncrementItem

License requirements: None.

setOperationAddonCondition(String, String, String) - Method in interface nxopen.cam.OperationSetTeaching

Sets the operation addon conditions
License requirements: fbm_author ("FBM Author")
.

setOperationCondition(String, String) - Method in interface nxopen.cam.OperationSetTeaching

Sets the operation conditions
License requirements: fbm_author ("FBM Author")
.

setOperationCushionSettings(int, double, double, double, double) - Method in interface nxopen.die.PressModel

Set operation cushion values
License requirements: ug_die_design ("Die Design")
.

setOperationID(String) - Method in interface nxopen.mechatronics.GanttOperationBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setOperationName(String) - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setOperationName(String) - Method in interface nxopen.mechatronics.GanttOperationBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setOperations(Operation[]) - Method in interface nxopen.cam.OperationTeaching

Sets the selected operations
License requirements: fbm_author ("FBM Author")
.

setOperations(NXObject[]) - Method in interface nxopen.mechatronics.FunctionObjectBuilder

Sets the operations
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setOperationSlideHeight(int, double) - Method in interface nxopen.die.PressModel

Set operation slide height
License requirements: ug_die_design ("Die Design")
.

setOperationState(ProjectNodesToCadGeometryBuilder.Operation) - Method in interface nxopen.cae.ProjectNodesToCadGeometryBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setOperationSubType(PartOperationCopyBuilder.OperationSubType) - Method in interface nxopen.pdm.PartOperationCopyBuilder

Sets the PartOperationCopyBuilder.OperationSubType for Create.

setOperationSubType(PartOperationCreateBuilder.OperationSubType) - Method in interface nxopen.pdm.PartOperationCreateBuilder

Sets the PartOperationCreateBuilder.OperationSubType for Create.

setOperationToCheck(Operation) - Method in interface nxopen.cam.CutDepthChecker

License requirements: cam_base ("CAM BASE")
.

setOperationTransportCurveSet(int, int) - Method in interface nxopen.die.PressModel

Tell the press model which transport curve set to use in the given operation
License requirements: ug_die_design ("Die Design")
.

setOperationType(BoltBuilder.BoltOperation) - Method in interface nxopen.cae.BoltBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setOperationType(ElementModifyOrderBuilder.Operation) - Method in interface nxopen.cae.ElementModifyOrderBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setOperationType(RapidSurfaceBuilder.OperationTypes) - Method in interface nxopen.features.RapidSurfaceBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setOperationTypes(GanttOperationBuilder.OperationType) - Method in interface nxopen.mechatronics.GanttOperationBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setOperationUserTransportCurves(int, double[]) - Method in interface nxopen.die.PressModel

Set values of the User Defined transport curve set, for given operation
License requirements: ug_die_design ("Die Design")
.

setOperator(GanttOperationParameterBuilder.OperatorOption) - Method in interface nxopen.mechatronics.GanttOperationParameterBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setOperatorControlType(OvercrownBuilder.ControlType) - Method in interface nxopen.features.OvercrownBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setOperatorMessage(String[]) - Method in interface nxopen.cam.ManualControlBuilder

Sets the operator message
License requirements: cam_base ("CAM BASE")
.

setOperatorMessage(String) - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder

License requirements: cam_base ("CAM BASE")
.

setOperatorOperationType(OvercrownBuilder.OperationType) - Method in interface nxopen.features.OvercrownBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setOperatorOutputType(OvercrownBuilder.OutputType) - Method in interface nxopen.features.OvercrownBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setOperatorTransitionType(OvercrownBuilder.TransitionType) - Method in interface nxopen.features.OvercrownBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setOperatorType(Condition.OperatorOption) - Method in interface nxopen.visualreporting.Condition

License requirements: nx_visual_reporting ("Visual Reporting")
.

setOperatorTypeOfCondition(Condition, Condition.OperatorOption) - Method in interface nxopen.visualreporting.VisualReportBuilder

Sets the Condition.OperatorOption of this condition.

setOperatorValue(String) - Method in interface nxopen.mechatronics.GanttOperationConditionBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setOperListProgramGroup(String) - Method in interface nxopen.cam.WorkInstructionBuilder

License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.

setOpName(String) - Method in interface nxopen.cam.InspectionCmmCommandBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setOppositeCorner(Point) - Method in interface nxopen.fields.SpatialMapBuilder

License requirements: None.

setOppositeDirection(boolean) - Method in interface nxopen.cam.CylinderMillingBuilder

License requirements: cam_base ("CAM BASE")
.

setOppositeFilletLengths(JointExitBuilder.FilletSizes) - Method in interface nxopen.weld.JointExitBuilder

Sets the fillet weld values for the opposite side of the welding joint.

setOppositeSense(boolean) - Method in interface nxopen.geometricutilities.FtmTransformCurvesBuilder

License requirements: None.

setOppositeSide(boolean) - Method in interface nxopen.geometricutilities.FtmTransformCurvesBuilder

License requirements: None.

setOppositeSideExtensionOption(LawExtensionBuilder.OppositeSideExtensionOptions) - Method in interface nxopen.features.LawExtensionBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING")
.

setOppositeSideExtensionOption(LawExtensionBuilderEx.OppositeSideExtensionOptions) - Method in interface nxopen.features.LawExtensionBuilderEx

License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING")
.

setOpstops(int) - Method in interface nxopen.cam.NcmTurnThreadBuilder

License requirements: cam_base ("CAM BASE")
.

setOptimalPoint1(Point) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setOptimalPoint2(Point) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setOptimalPoint3(Point) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setOptimization(HoleBossGeom.OptimizationTypes) - Method in interface nxopen.cam.HoleBossGeom

License requirements: cam_base ("CAM BASE")
.

setOptimizationBasedOn(OperationBuilder.OptimizationBasedOnTypes) - Method in interface nxopen.cam.OperationBuilder

License requirements: cam_base ("CAM BASE")
.

setOptimizationConstraints(String[], NXObject[], OptimizationBuilder.OptimizationAttributeType[], double[], double[], OptimizationBuilder.OptimizationConstraintLimitType[]) - Method in interface nxopen.optimization.OptimizationBuilder

Sets the constraints
License requirements: None.

setOptimizationDesignVariables(DAOConstraint[]) - Method in interface nxopen.cae.optimization.DAOSolution

Deprecated.

Deprecated in NX9.0.0. Not a valid method. Use DAOSolution.createDesignVariableBuilder(nxopen.cae.optimization.DAODesignVariable) instead.

setOptimizationDistanceMethod(OperationBuilder.OptimizationDistanceTypes) - Method in interface nxopen.cam.OperationBuilder

License requirements: cam_base ("CAM BASE")
.

setOptimizationLevel(OperationBuilder.OptimizationLevelTypes) - Method in interface nxopen.cam.OperationBuilder

License requirements: cam_base ("CAM BASE")
.

setOptimizationMethod(ParamBuilder.OptimizationTypes) - Method in interface nxopen.cam.ParamBuilder

License requirements: cam_base ("CAM BASE")
.

setOptimizationObjectives(String[], NXObject[], OptimizationBuilder.OptimizationAttributeType[], double[]) - Method in interface nxopen.optimization.OptimizationBuilder

Sets the objectives
License requirements: None.

setOptimizationType(OptimizationBuilder.OptimizationTargetType) - Method in interface nxopen.optimization.OptimizationBuilder

License requirements: None.

setOptimizationVariables(String[], NXObject[], OptimizationBuilder.OptimizationAttributeType[], double[], double[]) - Method in interface nxopen.optimization.OptimizationBuilder

Sets the variables
License requirements: None.

setOptimize(boolean) - Method in interface nxopen.AcisImporter

License requirements: None.

setOptimize(boolean) - Method in interface nxopen.Catiav4Importer

License requirements: None.

setOptimize(boolean) - Method in interface nxopen.Catiav5Importer

License requirements: None.

setOptimize(boolean) - Method in interface nxopen.DxfdwgImporter

License requirements: None.

setOptimize(boolean) - Method in interface nxopen.facet.SubdivideFacetBodyBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setOptimize(boolean) - Method in interface nxopen.IgesImporter

License requirements: None.

setOptimize(boolean) - Method in interface nxopen.ProeImporter

License requirements: None.

setOptimize(boolean) - Method in interface nxopen.Step203Importer

License requirements: None.

setOptimize(boolean) - Method in interface nxopen.Step214Importer

License requirements: None.

setOptimize(boolean) - Method in interface nxopen.Step242Importer

License requirements: None.

setOptimizeCurve(boolean) - Method in interface nxopen.preferences.PartModeling

License requirements: None.

setOptimizeCurveAngleToleranceFactor(double) - Method in interface nxopen.preferences.PartModeling

License requirements: None.

setOptimizeCurveDistanceToleranceFactor(double) - Method in interface nxopen.preferences.PartModeling

License requirements: None.

setOptimizeCurveToleranceFactor(double) - Method in interface nxopen.preferences.PartModeling

Deprecated.

Deprecated in NX11.0.0. It was split into two factors. Please use PartModeling.setOptimizeCurveDistanceToleranceFactor(double) and PartModeling.setOptimizeCurveAngleToleranceFactor(double) instead.

setOptimizedCutLevelColor(NXColor) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setOptimizeFeedRateWhenGenerating(boolean) - Method in interface nxopen.cam.FeedsBuilder

License requirements: cam_base ("CAM BASE")
.

setOptimizePath(boolean) - Method in interface nxopen.cam.UpDownCutting

License requirements: cam_base ("CAM BASE")
.

setOptimizerControl(DAOStopCondition) - Method in interface nxopen.cae.optimization.DAOSolution

Deprecated.

Deprecated in NX9.0.0. Not a valid method. Use DAOSolution.getSolutionControls() instead.

setOptimizeSettings(boolean) - Method in interface nxopen.drawings.ViewCreationWizardBuilder

License requirements: drafting ("DRAFTING")
.

setOption(boolean) - Method in interface nxopen.cam.Cycle

License requirements: cam_base ("CAM BASE")
.

setOption(PitchSetting.OptionTypes) - Method in interface nxopen.cam.PitchSetting

License requirements: cam_base ("CAM BASE")
.

setOption(TrimPoint.Options) - Method in interface nxopen.cam.TrimPoint

License requirements: cam_base ("CAM BASE")
.

setOption(ZAxisSmoothing.Options) - Method in interface nxopen.cam.ZAxisSmoothing

License requirements: cam_base ("CAM BASE")
.

setOption(DrawingSheetBuilder.SheetOption) - Method in interface nxopen.drawings.DrawingSheetBuilder

License requirements: drafting ("DRAFTING")
.

setOption(ChamferBuilder.ChamferOption) - Method in interface nxopen.features.ChamferBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setOption(EmbossProjection.ProjectionOption) - Method in interface nxopen.features.EmbossProjection

Sets the projection option
License requirements: solid_modeling ("SOLIDS MODELING")
.

setOption(Type) - Method in interface nxopen.geometricutilities.FeatureOffset

License requirements: solid_modeling ("SOLIDS MODELING")
.

setOption(ModlMotion.Options) - Method in interface nxopen.geometricutilities.ModlMotion

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setOptional(boolean) - Method in interface nxopen.report.BaseArgument

License requirements: None.

setOptionalAttributes(CharacteristicList) - Method in interface nxopen.routing.WatertightFittingsBuilder

Set optional attributes for Watertight Fittings.

setOptionalGeometry(DisplayableObject) - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder

Sets one geometry for input selection which has multiple options.

setOptionMask(int) - Method in interface nxopen.blockstyler.OnPathDimension

License requirements: None.

setOptionMenuTitle(String) - Method in interface nxopen.blockstyler.OnPathDimension

License requirements: None.

setOptionsColor01(NXColor) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setOptionsColor02(NXColor) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setOptionsColor03(NXColor) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setOptionsColor04(NXColor) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setOptionsColor05(NXColor) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setOptionsColor06(NXColor) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setOptionsColor07(NXColor) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setOptionsColor08(NXColor) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setOptionsColor09(NXColor) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setOptionsColor10(NXColor) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setOptionsColor11(NXColor) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setOptionsColor12(NXColor) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setOptionsCreateBall(boolean) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setOptionsCreateThicknessText(boolean) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setOptionsDisplayDynamicBall(boolean) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setOptionsDisplayMeshElements(boolean) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setOptionsDisplayOppositeMeshElements(boolean) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setOptionsDisplayThicknessVectors(boolean) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setOptionsDynamicSnapToVertex(boolean) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setOptionsLegendControl(WallThicknessCheckerBuilder.LegendControl) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setOptionsLowerLimit01(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setOptionsLowerLimit02(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setOptionsLowerLimit03(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setOptionsLowerLimit04(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setOptionsLowerLimit05(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setOptionsLowerLimit06(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setOptionsLowerLimit07(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setOptionsLowerLimit08(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setOptionsLowerLimit09(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setOptionsLowerLimit10(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setOptionsLowerLimit11(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setOptionsLowerLimit12(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setOptionsNumberOfColors(int) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setOptionsNumDecimals(int) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setOptionsRangeHighLimit(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setOptionsRangeLowLimit(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setOptionsRangeType(WallThicknessCheckerBuilder.RangeType) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setOptionsSaveThicknessVectorsAsLines(boolean) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setOptionsUpperLimit01(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setOptionsUpperLimit02(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setOptionsUpperLimit03(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setOptionsUpperLimit04(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setOptionsUpperLimit05(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setOptionsUpperLimit06(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setOptionsUpperLimit07(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setOptionsUpperLimit08(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setOptionsUpperLimit09(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setOptionsUpperLimit10(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setOptionsUpperLimit11(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setOptionsUpperLimit12(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder

License requirements: None.

setOptionText(String) - Method in interface nxopen.cam.UdeParameter

License requirements: cam_base ("CAM BASE")
.

setOptionType(MultipleViewPlacementBuilder.Option) - Method in interface nxopen.drawings.MultipleViewPlacementBuilder

License requirements: None.

setOptionUpdateSubsetOnLoad(LoadOptions.UpdateSubsetOnLoad) - Method in interface nxopen.LoadOptions

Sets the option that controls the subset updates during load
License requirements: None.

setOptionValue(String) - Method in interface nxopen.cam.UdeParameter

Deprecated.

Deprecated in NX8.0.0. Use CAM.UdeParameter#optionText and CAM.UdeParameter#setOptionText instead.

setOrbitType(UndersizeBuilder.Orbit) - Method in interface nxopen.tooling.UndersizeBuilder

License requirements: None.

setOrder(DmCmMultiplePassesCiBuilder.OrderType) - Method in interface nxopen.cam.DmCmMultiplePassesCiBuilder

License requirements: cam_base ("CAM BASE")
.

setOrder(MultiplePassesBuilder.OrderTypes) - Method in interface nxopen.cam.MultiplePassesBuilder

License requirements: cam_base ("CAM BASE")
.

setOrderGridCount(int) - Method in interface nxopen.cae.xyplot.GridStyle2DColorContour

License requirements: nx_ftk ("NX Advanced Graphing")
.

setOrderInterval(double) - Method in interface nxopen.cae.xyplot.GridStyle2DColorContour

License requirements: nx_ftk ("NX Advanced Graphing")
.

setOrderRegionsType(DmAmBuilder.OrderRegionsOptTypes) - Method in interface nxopen.cam.DmAmBuilder

License requirements: cam_base ("CAM BASE")
.

setOrderValue(double) - Method in interface nxopen.cae.AfuZHeaderInfo

Sets the value of order field
License requirements: nx_ftk ("NX Advanced Graphing")
.

setOrdinateDimensionPreferences(OrdinateDimensionPreferences) - Method in interface nxopen.annotations.DimensionPreferences

Sets the ordinate dimension preferences
License requirements: None.

setOrdinateTextAngle(double) - Method in interface nxopen.annotations.OrdinateStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setOrdinateTextOrientation(TextOrientation) - Method in interface nxopen.annotations.OrdinateStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setOrdinateView(NXObject) - Method in interface nxopen.tooling.AutoDimensionBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setOriCsystem(CoordinateSystem) - Method in interface nxopen.cae.BushingEADBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setOriCsystem(CoordinateSystem) - Method in interface nxopen.cae.GapEADBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setOriDirr(Direction) - Method in interface nxopen.cae.BushingEADBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setOriDirr(Direction) - Method in interface nxopen.cae.GapEADBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setOrient(boolean) - Method in interface nxopen.drawings.ViewStyleDetailBuilder

License requirements: drafting ("DRAFTING")
.

setOrient(boolean) - Method in interface nxopen.drawings.ViewStyleProjectedBuilder

License requirements: drafting ("DRAFTING")
.

setOrient(boolean) - Method in interface nxopen.drawings.ViewStyleSectionConstraintsBuilder

License requirements: drafting ("DRAFTING")
.

setOrientation(ChamferOrientationType) - Method in interface nxopen.annotations.BaseChamferDimensionBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setOrientation(TextOrientation) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setOrientation(Matrix3x3) - Method in interface nxopen.AutomaticTraceline

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setOrientation(double) - Method in interface nxopen.cae.LaminatePly

License requirements: nx_lam_composites ("Laminate Composites")
.

setOrientation(TextOrientation) - Method in interface nxopen.cae.xyplot.TextStyleSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setOrientation(double) - Method in interface nxopen.cam.Cycle

License requirements: cam_base ("CAM BASE")
.

setOrientation(Point3d, Vector3d, Vector3d) - Method in interface nxopen.Conic

Sets the center of the conic.

setOrientation(ISurface) - Method in interface nxopen.die.WearPlateLocChildBuilder

Sets the orientation plane of die wear plate and locators
License requirements: ug_die_design ("Die Design")
.

setOrientation(boolean) - Method in interface nxopen.drawings.SvtBuilder

License requirements: drafting ("DRAFTING")
.

setOrientation(Vector3d, Vector3d) - Method in interface nxopen.features.BlockFeatureBuilder

Sets the orientation for the block
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setOrientation(Matrix3x3) - Method in interface nxopen.features.HumanBuilder

Sets human orientaion
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setOrientation(Direction) - Method in interface nxopen.features.shipdesign.PenetrationCutoutBuilder

License requirements: nx_penetration_mgmt ("Penetration Management")
.

setOrientation(Direction) - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder

License requirements: nx_penetration_mgmt ("Penetration Management")
.

setOrientation(MeasureAngleBuilder.OrientationType) - Method in interface nxopen.MeasureAngleBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setOrientation(CoordinateSystem) - Method in interface nxopen.mechatronics.CollisionShapeBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setOrientation(CoordinateSystem) - Method in interface nxopen.mechatronics.InclinometerBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setOrientation(CoordinateSystem) - Method in interface nxopen.mechatronics.RigidBodyBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setOrientation(NXMatrix) - Method in interface nxopen.motion.BushingDefine

License requirements: mechanisms ("MECHANISMS")
.

setOrientation(SessionVisualizationHighQualityImage.OrientationType) - Method in interface nxopen.preferences.SessionVisualizationHighQualityImage

Sets the orientation for the High Quality Image (portrait or landscape).

setOrientation(PrintBuilder.OrientationOption) - Method in interface nxopen.PrintBuilder

License requirements: None.

setOrientation(CoordinateSystem) - Method in interface nxopen.weld.WeldFillBuilder

License requirements: ugweld ("UG WELD")
.

setOrientation(Matrix3x3) - Method in interface nxopen.Xform

Sets the orientation
License requirements: None.

setOrientationAngleRule(FeatureParmsBuilder.OrientationAngleRuleTypes) - Method in interface nxopen.features.shipdesign.FeatureParmsBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setOrientationAngleRule(FeatureParmsBuilder.OrientationAngleRuleTypes) - Method in interface nxopen.features.shipdesign.StiffenerBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setOrientationBySupport(boolean) - Method in interface nxopen.features.shipdesign.StiffenerBySupportPathBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setOrientationColor(ElementMaterialOrientationCheckBuilder.MaterialOrientationType, NXColor) - Method in interface nxopen.cae.modelcheck.ElementMaterialOrientationCheckBuilder

Sets display color of a specified material orientation type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setOrientationCsys(CoordinateSystem) - Method in interface nxopen.features.shipdesign.PinJigBuilder

License requirements: nx_ship_mfg_prep ("Ship Manufacturing")
.

setOrientationMethod(OffsetSurfaceBuilder.OrientationMethodType) - Method in interface nxopen.features.OffsetSurfaceBuilder

Sets the orientation method
License requirements: solid_modeling ("SOLIDS MODELING")
.

setOrientationMethod(EdgeReinforcementBuilder.OrientationMethods) - Method in interface nxopen.features.shipdesign.EdgeReinforcementBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setOrientationMethod(StiffenerSystemBuilder.OrientationMethods) - Method in interface nxopen.features.shipdesign.EditStockBuilder

Deprecated.

Deprecated in NX10.0.0. Orientation method can only be modified on the full profile system itself.

setOrientationMethod(OrientationRegionItemBuilder.OrientationMethodTypes) - Method in interface nxopen.features.shipdesign.OrientationRegionItemBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setOrientationMethod(StiffenerSystemBuilder.OrientationMethods) - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setOrientationMethod(StiffenerSystemBuilder.OrientationMethods) - Method in interface nxopen.features.shipdesign.SubSystemBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setOrientationMethod(TextBuilder.OrientationMethodOptions) - Method in interface nxopen.features.TextBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setOrientationMethod(JointmarkBuilder.OrientationMethodTypes) - Method in interface nxopen.weld.JointmarkBuilder

License requirements: ugweld ("UG WELD")
.

setOrientationOption(HelixBuilder.OrientationOptions) - Method in interface nxopen.features.HelixBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setOrientationOption(LinearDimensionBuilder.OrientationOptionType) - Method in interface nxopen.features.LinearDimensionBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setOrientationOption(OrientationMethodBuilder.OrientationOptions) - Method in interface nxopen.geometricutilities.OrientationMethodBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setOrientationOption(PatternOrientation.Enum) - Method in interface nxopen.geometricutilities.PatternOrientation

Deprecated.

Deprecated in NX8.0.0. The replacement function depends on the pattern type. See this method's documentation for more detailed information.

setOrientationPlane(IOrientation) - Method in interface nxopen.die.PadChildBuilder

Sets the orientation plane of the die pad.

setOrientationPoint(Point) - Method in interface nxopen.geometricutilities.OrientationMethodBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setOrientationReferenceCSYS(Matrix3x3) - Method in interface nxopen.tooling.GeneralInsertBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setOrientationState(BeamEADBuilder.State) - Method in interface nxopen.cae.BeamEADBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setOrientationState(BushingEADBuilder.State) - Method in interface nxopen.cae.BushingEADBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setOrientationState(GapEADBuilder.State) - Method in interface nxopen.cae.GapEADBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setOrientationStatus(boolean) - Method in interface nxopen.cam.Cycle

License requirements: cam_base ("CAM BASE")
.

setOrientationType(SimLoadRecipeMapping.OrientationTypes) - Method in interface nxopen.cae.SimLoadRecipeMapping

License requirements: nx_masterfem ("Finite Element Modeling")
.

setOrientationType(GeometryGroup.OrientationTypes) - Method in interface nxopen.cam.GeometryGroup

License requirements: cam_base ("CAM BASE")
.

setOrientationType(LaserHeadOrientation.Types) - Method in interface nxopen.cam.LaserHeadOrientation

License requirements: cam_base ("CAM BASE")
.

setOrientationType(View2dOrientBuilder.Type) - Method in interface nxopen.drawings.View2dOrientBuilder

License requirements: drafting ("DRAFTING")
.

setOrientationType(ViewOrientationBuilder.Orientation) - Method in interface nxopen.drawings.ViewOrientationBuilder

License requirements: drafting ("DRAFTING")
.

setOrientationType(ViewStyleFPCalloutConfigBuilder.OrientationType) - Method in interface nxopen.drawings.ViewStyleFPCalloutConfigBuilder

Sets the orientation type for flat pattern callouts.

setOrientationType(BushingDefine.OrientationTypes) - Method in interface nxopen.motion.BushingDefine

License requirements: mechanisms ("MECHANISMS")
.

setOrientationVector(Direction) - Method in interface nxopen.features.NSidedSurfaceBuilder

License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling"), nx_freeform_1 ("basic freeform modeling")
.

setOrientationVector(Direction) - Method in interface nxopen.features.shipdesign.EdgeReinforcementBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setOrientationVector(Direction) - Method in interface nxopen.features.shipdesign.EditStockBuilder

Deprecated.

Deprecated in NX10.0.0. Orientation vector can only be modified on the full profile system itself.

setOrientationVector(Direction) - Method in interface nxopen.features.shipdesign.ProfileBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setOrientationVector(Direction) - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setOrientationVector(Direction) - Method in interface nxopen.features.shipdesign.SubSystemBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setOrientationVector(Direction) - Method in interface nxopen.features.TextBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setOrientationVector(Direction) - Method in interface nxopen.geometricutilities.OrientationMethodBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setOrientedElement(FEElement) - Method in interface nxopen.cae.BeamSectionOrientationOptions

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setOrientEnum(StudioImageCaptureBuilder.OrientEnumType) - Method in interface nxopen.display.StudioImageCaptureBuilder

License requirements: None.

setOrientPitch(int) - Method in interface nxopen.tooling.DirectUnfoldBuilder

License requirements: None.

setOrientPitch(IntermediateStageBuilder.Orientations) - Method in interface nxopen.tooling.IntermediateStageBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setOrientSectionToDraw(DrawBeadBuilder.OrientSectionToDrawTypes) - Method in interface nxopen.die.DrawBeadBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setOrientType(ProfileBuilder.OrientationOption) - Method in interface nxopen.features.shipdesign.ProfileBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setOrientType(StiffenerBuilder.OrientationMethod) - Method in interface nxopen.features.shipdesign.StiffenerBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setOrientVector(Direction) - Method in interface nxopen.features.shipdesign.StiffenerBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setOrigin(Annotation.AssociativeOriginData, Point3d) - Method in interface nxopen.annotations.AnnotationPlacement

Sets the origin of the current annotation
License requirements: drafting ("DRAFTING")
.

setOrigin(Point3d) - Method in interface nxopen.annotations.DefineTitleBlockBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setOrigin(Point) - Method in interface nxopen.annotations.RegionBuilder

License requirements: geometric_tol ("GDT")
.

setOrigin(Point3d) - Method in interface nxopen.Axis

Sets the origin for a non-associative axis.

setOrigin(Point3d) - Method in interface nxopen.blockstyler.ReverseDirection

License requirements: None.

setOrigin(Point3d) - Method in interface nxopen.blockstyler.SpecifyOrientation

License requirements: None.

setOrigin(Point3d) - Method in interface nxopen.cae.PostGraphAlongPathBuilder

Set vector origin for extracting data for x axis
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setOrigin(Point3d) - Method in interface nxopen.CoordinateSystem

License requirements: None.

setOrigin(Point3d) - Method in interface nxopen.die.LineupBuilder

Sets the origin of the lineup
License requirements: die_engineering ("DIE ENGINEERING")
.

setOrigin(Point3d) - Method in interface nxopen.die.QuickBinderWrapBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setOrigin(Point3d) - Method in interface nxopen.Direction

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setOrigin(Point) - Method in interface nxopen.display.DecalBuilder

License requirements: None.

setOrigin(Point3d) - Method in interface nxopen.display.DynamicSectionBuilder

Sets the section origin.

setOrigin(BordersAndZonesBuilder.ZoneOrigin) - Method in interface nxopen.drawings.BordersAndZonesBuilder

Deprecated.

Deprecated in NX10.0.0. Use SheetZoneSettingsBuilder.origin() instead.

setOrigin(Point) - Method in interface nxopen.drawings.DrawingRegionBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setOrigin(ZoneOrigin) - Method in interface nxopen.drawings.SheetZoneSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setOrigin(Point3d) - Method in interface nxopen.features.BlockFeatureBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setOrigin(Point3d) - Method in interface nxopen.features.CylinderBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setOrigin(ClosedCornerBuilder.OriginTypes) - Method in interface nxopen.features.sheetmetal.ClosedCornerBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setOrigin(Point) - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilder

Deprecated.

Deprecated in NX11.0.0. Use SubdivisionPrimitiveShapeBuilderEx instead.

setOrigin(Point) - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilderEx

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setOrigin(Point) - Method in interface nxopen.fields.SpatialMapBuilder

License requirements: None.

setOrigin(Point3d) - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionPlaneBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setOrigin(Point3d) - Method in interface nxopen.geometricutilities.AnchorLocatorBuilder

License requirements: None.

setOrigin(Point3d) - Method in interface nxopen.IPlane

License requirements: None.

setOrigin(Point) - Method in interface nxopen.motion.LinkAttachmentData

License requirements: None.

setOrigin(Point) - Method in interface nxopen.motion.VObject

License requirements: mechanisms ("MECHANISMS")
.

setOrigin(Point) - Method in interface nxopen.tooling.DieEngDieTipBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setOrigin(Tag, double[]) - Method in interface nxopen.uf.UFCsys

Refer to UF_CSYS_set_origin for documentation.

setOrigin(Tag, double[]) - Method in interface nxopen.uf.UFDrf

Refer to UF_DRF_set_origin for documentation.

setOrigin(Point3d) - Method in interface nxopen.View

Moves the given position to the center of the view.

setOrigin(Point3d) - Method in interface nxopen.WCS

License requirements: None.

setOrigin(Point3d) - Method in interface nxopen.Xform

Sets the coordinates of the origin
License requirements: None.

setOriginalBodyOption(CleanupFacetBodyBuilder.OriginalBodyOptions) - Method in interface nxopen.facet.CleanupFacetBodyBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setOriginalBodyOption(ConvertFacetBodyBuilder.OriginalBodyOptions) - Method in interface nxopen.facet.ConvertFacetBodyBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setOriginalBodyOption(FacetBodyFromBodyBuilder.OriginalBodyOptions) - Method in interface nxopen.facet.FacetBodyFromBodyBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setOriginalColorShellOptions(PartVisualizationEmphasis.OriginalColorShellOptions) - Method in interface nxopen.preferences.PartVisualizationEmphasis

Modifies options that control the appearance of de-emphasized shaded geometry when the See-Thru style is set to Original Color Shell.

setOriginalDesignBody(Body) - Method in interface nxopen.features.shipdesign.DvToMvMappingBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setOriginalFace(Face) - Method in interface nxopen.geometricutilities.LocalUntrimBuilder

Sets the originally selected face.

setOriginalMfgBody(Body) - Method in interface nxopen.features.shipdesign.DvToMvMappingBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setOriginalNodeLocationColor(NXColor) - Method in interface nxopen.cae.ProjectNodesToCadGeometryBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setOriginalObjectsDeleted(boolean) - Method in interface nxopen.assemblies.CreateNewComponentBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setOriginalResultOption(CyclicSymmetricParameters.OriginalResult) - Method in interface nxopen.cae.CyclicSymmetricParameters

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setOriginals(CutCopyPasteBuilder.TypeOperation) - Method in interface nxopen.drafting.CutCopyPasteBuilder

License requirements: drafting ("DRAFTING")
.

setOriginalSurfaceSmooth(TBSSmoothBuilder.OriginalSurfaceSmoothingOption) - Method in interface nxopen.cae.optimization.TBSSmoothBuilder

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setOriginAnchorOrigin(Point3d) - Method in interface nxopen.die.QuickBinderBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setOriginAndLengths(Point3d, String, String, String) - Method in interface nxopen.features.BlockFeatureBuilder

Create a block by setting the origin and the block length, width, and height.

setOriginAndMatrix(Point3d, Matrix3x3) - Method in interface nxopen.WCS

Sets the origin and orientation matrix of the WCS
License requirements: None.

setOriginCentered(boolean) - Method in interface nxopen.annotations.Dimension

Sets a flag indicating whether the dimension text is centered equally between the extension lines.

setOriginDisplay(OrdinateOriginDisplayOption) - Method in interface nxopen.annotations.OrdinateDimensionPreferences

Sets the origin display option
License requirements: None.

setOriginOption(SessionSketch.OriginType) - Method in interface nxopen.preferences.SessionSketch

Deprecated.

Deprecated in NX8.0.0. Use SketchInPlaceBuilder.setProjectWorkPartOrigin(boolean) and SketchInPlaceBuilder.setMakeOriginAssociative(boolean) and SketchInPlaceBuilder.setSketchOrigin(nxopen.Point) instead.

setOriginOption(OriginMethod) - Method in interface nxopen.SketchInPlaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT")
.

setOriginOptionInfer(OriginMethod) - Method in interface nxopen.SketchInPlaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT")
.

setOriginPath(String) - Method in interface nxopen.layout2d.PublishComponentBuilder

License requirements: nx_layout ("NX Layout")
.

setOriginPoint(Point3d) - Method in interface nxopen.annotations.OriginBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING")
.

setOriginPoint(Point) - Method in interface nxopen.features.BlockFeatureBuilder

License requirements: None.

setOriginPoint(Point) - Method in interface nxopen.features.vehicledesign.VehicleCoordinateSystemBuilder

License requirements: nx_general_packaging ("NX General Packaging") OR ug_body_design ("Body Design") OR nx_posture ("NX Jack Posture Prediction")
.

setOriginPoint(Point) - Method in interface nxopen.motion.MarkerBuilder

License requirements: mechanisms ("MECHANISMS")
.

setOriginPosition(Point3d) - Method in interface nxopen.display.DecalBuilder

License requirements: None.

setOriginSpecified(boolean) - Method in interface nxopen.blockstyler.SpecifyOrientation

License requirements: None.

setOriginType(ThreeBendCornerBuilder.OriginTypes) - Method in interface nxopen.features.sheetmetal.ThreeBendCornerBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setOriMethod(BeamEADBuilder.OrientationMethod) - Method in interface nxopen.cae.BeamEADBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setOriMethod(BushingEADBuilder.OrientationMethod) - Method in interface nxopen.cae.BushingEADBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setOriMethod(GapEADBuilder.OrientationMethod) - Method in interface nxopen.cae.GapEADBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setOrphanNodeMovementOption(int) - Method in interface nxopen.cae.AutomaticMorphBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setOrthotropicFailureCriterion(DurabilityEventStrengthSettingsBuilder.OrthotropicFailureCriterionEnum) - Method in interface nxopen.cae.DurabilityEventStrengthSettingsBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setOrthotropicFatigueCriterion(DurabilityEventFatigueSettingsBuilder.OrthotropicFatigueCriterionEnum) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setOrthotropicMeanStress(DurabilityEventFatigueSettingsBuilder.OrthotropicMeanStressEnum) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setOtherColor(double[]) - Method in interface nxopen.facet.DetectPrimitivesBuilder

Sets the other color
License requirements: None.

setOtherSideData(LineWeldSideData) - Method in interface nxopen.annotations.LineWeldData

Sets the other side data
License requirements: None.

setOtherSideSymbol(Symbol) - Method in interface nxopen.weld.JointExitBuilder

License requirements: structure_weld ("STRUCTURE WELD")
.

setOthersOffset(int) - Method in interface nxopen.cae.SolverAppendOption

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setOuterCornerTreatmentType(boolean, FeatureProperty) - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign

Sets the the outer corner treatment type in Flat as Solid operation
License requirements: nx_flexible_pcb ("NX Flexible PCB")
.

setOuterCornerTreatmentType(boolean, FeatureProperty) - Method in interface nxopen.preferences.PartSheetmetal

SETS the outer corner treatment type in Flat as Solid operation
License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setOuterCornerTreatmentValue(boolean, String) - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign

Sets the outer corner treatment value for Flat as Solid operations
License requirements: nx_flexible_pcb ("NX Flexible PCB")
.

setOuterCornerTreatmentValue(boolean, String) - Method in interface nxopen.preferences.PartSheetmetal

THE outer corner treatment value for Flat as Solid operations
License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setOuterDiameter(double) - Method in interface nxopen.cam.BoundaryTurnBlank

License requirements: cam_base ("CAM BASE")
.

setOuterDiameter(double) - Method in interface nxopen.routing.StockDefinition

Sets the outer diameter
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setOuterDiameterType(SearchModelViewBuilder.ValueComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder

License requirements: None.

setOuterDiameterValue(double) - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder

License requirements: None.

setOuterMold(boolean) - Method in interface nxopen.features.sheetmetal.ExportFlatPatternBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setOuterRoughOffset(boolean) - Method in interface nxopen.tooling.ShimBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setOuterTolerance(double) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setOutlineColor(NXColor) - Method in interface nxopen.assemblies.ProductOutlineBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setOutlineColor(NXColor) - Method in interface nxopen.cae.xyplot.BaseBarStyleSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setOutlineColor(NXColor) - Method in interface nxopen.cae.xyplot.BasePlateStyleSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setOutlineColor(NXColor) - Method in interface nxopen.cae.xyplot.SurfaceStyleSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setOutlineEnlargeTimes(double) - Method in interface nxopen.tooling.QuickQuotationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setOutlineEnum(PlatformEquipmentBuilder.OutlineTypeAPI) - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setOutOfDateColor(int) - Method in interface nxopen.preferences.PartSketch

Sets the sketch out of date curve color
License requirements: None.

setOutput(ResultsCombinationBuilder.Output) - Method in interface nxopen.cae.ResultsCombinationBuilder

Set output type from result combination
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setOutput(ResultsEnvelopeBuilder.Output) - Method in interface nxopen.cae.ResultsEnvelopeBuilder

Set output type from result envelope
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setOutput(ResultsReductionBuilder.Output) - Method in interface nxopen.cae.ResultsReductionBuilder

Set output type from result reduction
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setOutput(DrawBeadBuilder.OutputTypes) - Method in interface nxopen.die.DrawBeadBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setOutput(ViewCopyTo3dBuilder.OutputOption) - Method in interface nxopen.drawings.ViewCopyTo3dBuilder

License requirements: nx_layout ("NX Layout")
.

setOutput(PatchOpeningsBuilder.OutputTypes) - Method in interface nxopen.features.PatchOpeningsBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING")
.

setOutput(UnsewBuilder.UnsewOutput) - Method in interface nxopen.features.UnsewBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setOutput(SectionAnalysisBuilder.OutputType) - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setOutput(SectionAnalysisExBuilder.OutputType) - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setOutput(PrintBuilder.OutputOption) - Method in interface nxopen.PrintBuilder

License requirements: None.

setOutput(ExportWeldBuilder.OutputType) - Method in interface nxopen.weld.ExportWeldBuilder

License requirements: ugweld ("UG WELD")
.

setOutputAfuFileName(String) - Method in interface nxopen.cae.DurabilityEvaluateFatigueHistoryBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setOutputAttributes(boolean) - Method in interface nxopen.weld.InformationBuilder

License requirements: ugweld ("UG WELD") OR structure_weld ("STRUCTURE WELD")
.

setOutputBallCenter(boolean) - Method in interface nxopen.cam.CAMSetup

License requirements: cam_base ("CAM BASE")
.

setOutputContactData(boolean) - Method in interface nxopen.cam.NcmScBuilder

License requirements: cam_base ("CAM BASE")
.

setOutputContactPoint(boolean) - Method in interface nxopen.cam.Cutcom

License requirements: cam_base ("CAM BASE")
.

setOutputCurveType(JoinCurvesBuilder.OutputCurve) - Method in interface nxopen.features.JoinCurvesBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setOutputCylTolerance(boolean) - Method in interface nxopen.cam.ProbeToleranceParametersBuilder

License requirements: None.

setOutputDirectory(String) - Method in interface nxopen.sim.ExportMachineKitBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setOutputDirectory(String) - Method in interface nxopen.sim.ImportMachineKitBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setOutputDirectory(String) - Method in interface nxopen.sim.MachineKitBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setOutputDiretory(String) - Method in interface nxopen.tooling.RenameAndExportComponentBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setOutputElements(FEElement[]) - Method in interface nxopen.cae.responsesimulation.ModalResultsEvaluationSettingBuilder

Sets destination nodes
License requirements: nx_response_anlys ("NX Response Analysis")
.

setOutputElements(FEElement[]) - Method in interface nxopen.cae.responsesimulation.PrlResultsEvaluationSettingBuilder

Sets the destination elements
License requirements: nx_response_anlys ("NX Response Analysis")
.

setOutputExactGeometry(boolean) - Method in interface nxopen.features.TrimSheetBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setOutputExperience(boolean) - Method in interface nxopen.cam.ProbeControlParametersBuilder

License requirements: None.

setOutputFeatures(OutputFeatureData[]) - Method in interface nxopen.features.CustomFeaturePostUpdateEvent

The output features created in post update event
License requirements: solid_modeling ("SOLIDS MODELING")
.

setOutputFile(String) - Method in interface nxopen.AcisExporter

License requirements: None.

setOutputFile(String) - Method in interface nxopen.ASCImporter

License requirements: nx_layout ("NX Layout")
.

setOutputFile(String) - Method in interface nxopen.cae.CreateJtBuilder

The output file
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setOutputFile(String) - Method in interface nxopen.cae.ResultsManipulationBuilder

The output file
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setOutputFile(String) - Method in interface nxopen.cam.InspectionAnalyzeOutputBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setOutputFile(String) - Method in interface nxopen.cam.InspectionGraphicalReportOutputBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setOutputFile(String) - Method in interface nxopen.cam.WorkInstructionOutputBuilder

License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.

setOutputFile(String) - Method in interface nxopen.Catiav4Creator

License requirements: None.

setOutputFile(String) - Method in interface nxopen.Catiav5Creator

License requirements: None.

setOutputFile(String) - Method in interface nxopen.DxfdwgCreator

License requirements: None.

setOutputFile(String) - Method in interface nxopen.DxfdwgImporter

License requirements: None.

setOutputFile(String) - Method in interface nxopen.features.sheetmetal.ExportFlatPatternBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setOutputFile(String) - Method in interface nxopen.features.shipdesign.FrameBarOutBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setOutputFile(String) - Method in interface nxopen.features.shipdesign.ManufacturingOutBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setOutputFile(String) - Method in interface nxopen.IgesCreator

License requirements: None.

setOutputFile(String) - Method in interface nxopen.IgesImporter

License requirements: None.

setOutputFile(String) - Method in interface nxopen.NXTo2dCreator

License requirements: None.

setOutputFile(String) - Method in interface nxopen.routing.IsoDrawingBuilder

License requirements: None.

setOutputFile(String) - Method in interface nxopen.Step203Creator

Deprecated.

Deprecated in NX11.0.0. Use StepCreator instead.

setOutputFile(String) - Method in interface nxopen.Step203Importer

License requirements: None.

setOutputFile(String) - Method in interface nxopen.Step214Creator

Deprecated.

Deprecated in NX11.0.0. Use StepCreator instead.

setOutputFile(String) - Method in interface nxopen.Step214Importer

License requirements: None.

setOutputFile(String) - Method in interface nxopen.StepCreator

License requirements: None.

setOutputFile(String) - Method in interface nxopen.tooling.LsdynaKfileGeneratorBuilder

Sets the output file.

setOutputFile(String) - Method in interface nxopen.tooling.SIZERExportBuilder

License requirements: mechanisms ("MECHANISMS") OR nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setOutputFileName(String) - Method in interface nxopen.layout2d.ExportComponentHierarchyBuilder

License requirements: nx_layout ("NX Layout")
.

setOutputFileType(DxfdwgCreator.OutputFileTypeOption) - Method in interface nxopen.DxfdwgCreator

License requirements: None.

setOutputFileType(NXTo2dCreator.OutputAsOption) - Method in interface nxopen.NXTo2dCreator

License requirements: None.

setOutputFolder(String) - Method in interface nxopen.tooling.CloneObject

License requirements: None.

setOutputFormat(InspectionAnalyzeOutputBuilder.OutputFormatType) - Method in interface nxopen.cam.InspectionAnalyzeOutputBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setOutputFormat(InspectionGraphicalReportOutputBuilder.OutputFormatType) - Method in interface nxopen.cam.InspectionGraphicalReportOutputBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setOutputFormat(WorkInstructionOutputBuilder.OutputFormatType) - Method in interface nxopen.cam.WorkInstructionOutputBuilder

License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.

setOutputGeometryType(WeldFeatureOutput) - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. This functionality is no longer supported.

setOutputJtFile(String) - Method in interface nxopen.JtCreator

License requirements: None.

setOutputLayer(int) - Method in interface nxopen.features.sheetmetal.MetaformBuilder

License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setOutputLengthAndVolume(boolean) - Method in interface nxopen.weld.InformationBuilder

License requirements: ugweld ("UG WELD") OR structure_weld ("STRUCTURE WELD")
.

setOutputLoadTool(boolean) - Method in interface nxopen.cam.Ude

License requirements: None.

setOutputLogFile(String) - Method in interface nxopen.pdm.PartOperationImportBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setOutputMethod(TrimLineDevelopmentBuilder.OutputMethodName) - Method in interface nxopen.die.TrimLineDevelopmentBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setOutputMethod(GeometricProperties.OutputType) - Method in interface nxopen.geometricanalysis.GeometricProperties

License requirements: None.

setOutputMultipleSheets(boolean) - Method in interface nxopen.features.SewBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setOutputName(String) - Method in interface nxopen.cae.ResultsManipulationBuilder

The output name
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setOutputNodes(FENode[]) - Method in interface nxopen.cae.responsesimulation.ModalResultsEvaluationSettingBuilder

Sets destination nodes
License requirements: nx_response_anlys ("NX Response Analysis")
.

setOutputNodes(FENode[]) - Method in interface nxopen.cae.responsesimulation.PrlResultsEvaluationSettingBuilder

Sets the destination nodes
License requirements: nx_response_anlys ("NX Response Analysis")
.

setOutputNullBandTolerance(boolean) - Method in interface nxopen.cam.ProbeToleranceParametersBuilder

License requirements: None.

setOutputOperatorMessage(boolean) - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder

License requirements: cam_base ("CAM BASE")
.

setOutputOpskip(boolean) - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder

License requirements: cam_base ("CAM BASE")
.

setOutputOpstop(boolean) - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder

License requirements: cam_base ("CAM BASE")
.

setOutputOption(boolean) - Method in interface nxopen.cae.SolidPropertyCheckBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setOutputOption(CenterlineDrillTurningBuilder.OutputOptionTypes) - Method in interface nxopen.cam.CenterlineDrillTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setOutputOption(OffsetSurfaceBuilder.OutputOptionType) - Method in interface nxopen.features.OffsetSurfaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setOutputOption(PatternFeatureBuilder.OutputOptions) - Method in interface nxopen.features.PatternFeatureBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setOutputOption(TubeBuilder.Output) - Method in interface nxopen.features.TubeBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setOutputOption(DraftAnalysisBuilder.SelectOutput) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setOutputOptions(EvaluationResultType[]) - Method in interface nxopen.cae.responsesimulation.ResponseResultsEvaluationSettingBuilder

Sets the output options
License requirements: nx_response_anlys ("NX Response Analysis")
.

setOutputOvertravel(boolean) - Method in interface nxopen.cam.ProbeControlParametersBuilder

License requirements: None.

setOutputPath(String) - Method in interface nxopen.tooling.LsdynaKfileGeneratorBuilder

Sets the output path.

setOutputPDF(boolean) - Method in interface nxopen.tooling.EWDraftingBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setOutputPercentFeedback(boolean) - Method in interface nxopen.cam.ProbeControlParametersBuilder

License requirements: None.

setOutputPlane(boolean) - Method in interface nxopen.cam.Cutcom

License requirements: cam_base ("CAM BASE")
.

setOutputPoints(boolean) - Method in interface nxopen.features.SectionCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setOutputQuantity(Result.Quantity) - Method in interface nxopen.cae.ResultsManipulationBuilder

The output quantity
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setOutputRequest(ModelingObjectPropertyTable) - Method in interface nxopen.cae.LaminateRandomEventBuilder

Deprecated.

Deprecated in NX10.0.0. Use LaminateDynamicEventBuilder.setOutputRequestObject(nxopen.cae.ModelingObjectPropertyTable) instead.

setOutputRequest(DirectionDataComponent) - Method in interface nxopen.cae.responsesimulation.ModalResultsEvaluationSettingBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setOutputRequestObject(ModelingObjectPropertyTable) - Method in interface nxopen.cae.LaminateDynamicEventBuilder

Set the output request.

setOutputResultType(ResultsManipulationBuilder.OutputResultType) - Method in interface nxopen.cae.ResultsManipulationBuilder

The result output type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setOutputSameSheet(boolean) - Method in interface nxopen.tooling.EWDraftingBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setOutputState(ConvertToFromReferenceBuilder.OutputType) - Method in interface nxopen.ConvertToFromReferenceBuilder

License requirements: None.

setOutputState(int) - Method in interface nxopen.tooling.LsdynaKfileGeneratorBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setOutputStop(boolean) - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder

License requirements: cam_base ("CAM BASE")
.

setOutputSurfaceOption(SilhouetteFlangeBuilder.OutputSurfaceOptions) - Method in interface nxopen.features.SilhouetteFlangeBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setOutputText(CGMBuilder.OutputTextOption) - Method in interface nxopen.CGMBuilder

License requirements: None.

setOutputText(PrintPDFBuilder.OutputTextOption) - Method in interface nxopen.PrintPDFBuilder

License requirements: None.

setOutputTo(DxfdwgCreator.OutputToOption) - Method in interface nxopen.DxfdwgCreator

License requirements: None.

setOutputTo(NXTo2dCreator.OutputToOption) - Method in interface nxopen.NXTo2dCreator

License requirements: None.

setOutputTolerance(boolean) - Method in interface nxopen.cam.ProbeToleranceParametersBuilder

License requirements: None.

setOutputToolOffset(boolean) - Method in interface nxopen.cam.ProbeControlParametersBuilder

License requirements: None.

setOutputType(FluidDomainBuilder.OutputOptionsType) - Method in interface nxopen.cae.FluidDomainBuilder

License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")
.

setOutputType(ArcOutputTypeCiBuilder.OutputTypes) - Method in interface nxopen.cam.ArcOutputTypeCiBuilder

License requirements: cam_base ("CAM BASE")
.

setOutputType(CleanupOutput.GeomTypes) - Method in interface nxopen.cam.CleanupOutput

License requirements: cam_base ("CAM BASE")
.

setOutputType(WedmArcOutputTypeCiBuilder.OutputTypes) - Method in interface nxopen.cam.WedmArcOutputTypeCiBuilder

License requirements: cam_base ("CAM BASE")
.

setOutputType(ConvertFacetBodyBuilder.OutputTypes) - Method in interface nxopen.facet.ConvertFacetBodyBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setOutputType(FacetBodyFromBodyBuilder.OutputTypes) - Method in interface nxopen.facet.FacetBodyFromBodyBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setOutputType(ProfileListBuilder.OutputTypes) - Method in interface nxopen.features.shipdesign.ProfileListBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setOutputType(ControlOutputBuilder.ControlOutputType) - Method in interface nxopen.motion.ControlOutputBuilder

License requirements: mechanisms ("MECHANISMS")
.

setOutputType(OutputType) - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. This functionality is no longer supported.

setOutputType(WeldBeadBuilder.OutputTypes) - Method in interface nxopen.weld.WeldBeadBuilder

License requirements: ugweld ("UG WELD")
.

setOutputType(OutputType) - Method in interface nxopen.weld.WeldPointBuilder

Sets the output type.

setOutputTypeAsString(String) - Method in interface nxopen.blockstyler.SpecifyCSYS

License requirements: None.

setOutputTypeName(String) - Method in interface nxopen.cam.MapFeatureTeaching

Sets the selected output type name
License requirements: fbm_author ("FBM Author")
.

setOutputUnit(PitchSetting.OutputUnitTypes) - Method in interface nxopen.cam.PitchSetting

License requirements: cam_base ("CAM BASE")
.

setOutputUnits(FreeBodyResultsBuilder.OutputUnits) - Method in interface nxopen.cae.FreeBodyResultsBuilder

Output Units
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setOutputUpperTolerance(boolean) - Method in interface nxopen.cam.ProbeToleranceParametersBuilder

License requirements: None.

setOutputWorkOffset(boolean) - Method in interface nxopen.cam.ProbeCalibrateStylusMoveBuilder

License requirements: None.

setOutputWorkOffset(boolean) - Method in interface nxopen.cam.ProbeControlParametersBuilder

License requirements: None.

setOuttol(double) - Method in interface nxopen.cam.GeometrySet

License requirements: cam_base ("CAM BASE")
.

setOuttol(double) - Method in interface nxopen.cam.SurfaceDriveGeometrySet

License requirements: cam_base ("CAM BASE")
.

setOuttol(double) - Method in interface nxopen.cam.WedmBasedGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setOuttol(double) - Method in interface nxopen.cam.WedmCutParameters

License requirements: cam_base ("CAM BASE")
.

setOutWallThickness(double) - Method in interface nxopen.tooling.DieDesignLowerBinderBuilder

License requirements: ug_die_design ("Die Design")
.

setOverallTranslucency(int) - Method in interface nxopen.display.ImageBaseBuilder

License requirements: None.

setOverbendAngle(double) - Method in interface nxopen.tooling.BendOperationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setOverbendAngle(double) - Method in interface nxopen.tooling.DirectUnbendBuilder

License requirements: None.

setOverbendOption(BendOperationBuilder.OverbendOptions) - Method in interface nxopen.tooling.BendOperationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setOverbendRadius(double) - Method in interface nxopen.tooling.BendOperationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setOverconstrainedColor(int) - Method in interface nxopen.preferences.PartSketch

Sets the sketch overconstrained color
License requirements: None.

setOvercutColor(NXColor) - Method in interface nxopen.tooling.ScrapDesignBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setOvercutOperation(ScrapDesignBuilder.OvercutType) - Method in interface nxopen.tooling.ScrapDesignBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setOvercutPosition(Point3d) - Method in interface nxopen.tooling.ScrapDesignBuilder

Sets the overcut position, it determines where the overcut sketch will be constrained
License requirements: solid_modeling ("SOLIDS MODELING")
.

setOverflowOption(FaceBlendBuilder.OverflowMethod) - Method in interface nxopen.features.FaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setOverhang(double) - Method in interface nxopen.drawings.ViewSectionLineBuilder

License requirements: drafting ("DRAFTING")
.

setOverlapAngle(double) - Method in interface nxopen.cam.NcmHoleMachining

License requirements: cam_base ("CAM BASE")
.

setOverlapColor(NXColor) - Method in interface nxopen.tooling.ScrapDesignBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setOverlapDelta(JointFrictionAdams.FrictionOverlapDelta) - Method in interface nxopen.motion.JointFrictionAdams

Sets the overlap delta
License requirements: mechanisms ("MECHANISMS")
.

setOverlapDelta(JointFrictionRecurDyn.FrictionOverlapDelta) - Method in interface nxopen.motion.JointFrictionRecurDyn

Sets the overlap delta
License requirements: mechanisms ("MECHANISMS")
.

setOverlapDistance(double) - Method in interface nxopen.cam.NcmHoleMachining

License requirements: cam_base ("CAM BASE")
.

setOverlapDistance(double) - Method in interface nxopen.cam.OutputUncutRegions

License requirements: cam_base ("CAM BASE")
.

setOverlapOption(EdgeBlendBuilder.Overlap) - Method in interface nxopen.features.EdgeBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setOverlappingColor(NXColor) - Method in interface nxopen.cae.BCSelectionDisplayBuilder

License requirements: None.

setOverlappingEntities(boolean) - Method in interface nxopen.DxfdwgCreator

License requirements: None.

setOverlappingEntities(boolean) - Method in interface nxopen.NXTo2dCreator

License requirements: None.

setOverlapType(NcmHoleMachining.OverlapTypes) - Method in interface nxopen.cam.NcmHoleMachining

License requirements: cam_base ("CAM BASE")
.

setOverlapWidth(double) - Method in interface nxopen.tooling.ScrapDesignBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setOverlayColor(NXColor) - Method in interface nxopen.drawings.VisualDrawingComparePrefsBuilder

License requirements: drafting ("DRAFTING")
.

setOverlayDataToUse(VisualDrawingComparePrefsBuilder.VisualDrawingComparePrefsOverlayDataToUse) - Method in interface nxopen.drawings.VisualDrawingComparePrefsBuilder

License requirements: drafting ("DRAFTING")
.

setOverriddenDimensionText(String[]) - Method in interface nxopen.annotations.DimensionStyleBuilder

Sets the overridden dimension text value
License requirements: None.

setOverride(DesignRuleOverride) - Method in interface nxopen.routing.DesignRuleViolation

Sets the override object for the violation is inquired
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setOverrideColor(boolean) - Method in interface nxopen.assemblies.ProductOutlineBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setOverrideDimensionText(boolean) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: None.

setOverrideExistingExpressions(boolean) - Method in interface nxopen.features.vehicledesign.BaseDataImportExportBuilder

License requirements: gateway ("UG GATEWAY")
.

setOverrideFolder(String) - Method in interface nxopen.pdm.ConfigurationContextBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setOverrideHiddenWireframeColor(int) - Method in interface nxopen.drawings.ShadingViewStyle

Sets the hidden wireframe override color.

setOverrideHiddenWireframeColor(int) - Method in interface nxopen.preferences.ShadingViewPreferences

Sets the hidden wireframe override color.

setOverrideMaterial(boolean) - Method in interface nxopen.cae.DurabilityEventOverridesBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setOverrideOptionValue(DesignRuleViolationViewer.OverrideOption) - Method in interface nxopen.routing.DesignRuleViolationViewer

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setOverrideProperty(String, boolean) - Method in interface nxopen.cae.MeshCollectorOccurrenceBuilder

Update-create or delete the passed in override based on the updateThisOverride flag
License requirements: nx_masterfem ("Finite Element Modeling")
.

setOverrideReason(String) - Method in interface nxopen.routing.PortConnection

Sets the reason why a port connection's validity was overridden.

setOverrideReason(Tag, String) - Method in interface nxopen.uf.UFRule

Deprecated.

The equivalent Open C method has retired

setOverrideText(String[]) - Method in interface nxopen.routing.DesignRuleViolationViewer

Sets the text for reason of overriding the violation
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setOverrideTimeStamp(Tag, int) - Method in interface nxopen.uf.UFRule

Deprecated.

The equivalent Open C method has retired

setOverrideUser(Tag, String) - Method in interface nxopen.uf.UFRule

Deprecated.

The equivalent Open C method has retired

setOverrideVisibleThreadColor(int) - Method in interface nxopen.drawings.ThreadsViewStyle

Sets the visible thread override color.

setOverrideVisibleThreadColor(NXColor) - Method in interface nxopen.drawings.ViewStyleThreadsBuilder

License requirements: drafting ("DRAFTING")
.

setOverrideVisibleThreadColor(int) - Method in interface nxopen.preferences.ThreadsViewPreferences

Sets the visible thread override color.

setOverrideVisibleWireframeColor(int) - Method in interface nxopen.drawings.ShadingViewStyle

Sets the visible wireframe override color.

setOverrideVisibleWireframeColor(int) - Method in interface nxopen.preferences.ShadingViewPreferences

Sets the visible wireframe override color.

setOverrideWithSmoothConnections(boolean) - Method in interface nxopen.cam.NcmSmoothingBuilder

License requirements: cam_base ("CAM BASE")
.

setOverstockRoundingMethod(LayoutLengthOptions.RoundingMethod) - Method in interface nxopen.formboard.LayoutLengthOptions

License requirements: routing_harness ("Routing Harness")
.

setOverstockSettings(PathStockBuilder) - Method in interface nxopen.routing.FittingOverstockBuilder

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setOvertravel(double) - Method in interface nxopen.cam.ProbeControlParametersBuilder

License requirements: None.

setOverwriteCollectors(boolean) - Method in interface nxopen.cae.LaminateImportZonesBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setOverwriteExistingFile(boolean) - Method in interface nxopen.display.DecalBuilder

License requirements: None.

setOverwriteLamProps(boolean) - Method in interface nxopen.cae.LaminateImportZonesBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setOverwriteMaterials(boolean) - Method in interface nxopen.cae.LaminateImportedLayupBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setOverwriteMaterials(boolean) - Method in interface nxopen.cae.LaminateImportZonesBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setOwner(String) - Method in interface nxopen.cae.AfuHeaderId

Sets the owner of AFU Header Id
License requirements: nx_ftk ("NX Advanced Graphing")
.

setOwner(NXObject) - Method in interface nxopen.layout2d.NewComponentBuilder

License requirements: nx_layout ("NX Layout")
.

setOwner(SystemObject) - Method in interface nxopen.mechatronics.ElectricalPartBuilder

Set the owner system object.

setOwner(String, String) - Method in interface nxopen.uf.UFClone

Refer to UF_CLONE_set_owner for documentation.

setOwningObject(NXObject) - Method in interface nxopen.GroupBuilder

License requirements: None.

setOwningPart(String) - Method in interface nxopen.pdm.CAEFileContainer

Sets the part tag of the owning part of the class CAEFileContainer .

setOwningPositioningTask(PositioningTask) - Method in interface nxopen.assemblies.PositioningGroupBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setOwningSubset(Subset) - Method in interface nxopen.assemblies.PositioningTaskBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setOwningSubsetInstance(Subset) - Method in interface nxopen.assemblies.DesignElementBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setPackedColumns(boolean) - Method in interface nxopen.blockstyler.Enumeration

License requirements: None.

setPadAttributes(String, String, int) - Method in interface nxopen.die.HoleChildBuilder

Sets the pad attributes, note existance of attributes depends on usage in main feature.

setPadAttributes(String, String, int) - Method in interface nxopen.die.HoleParentBuilder

Sets the pad attributes, note existance of attributes depends on usage in main feature.

setPadAttributes(String, String, int) - Method in interface nxopen.die.KeywayChildBuilder

Sets the pad attributes, note existance of attributes depends on usage in main feature.

setPadAttributes(String, String, int) - Method in interface nxopen.die.KeywayParentBuilder

Sets the pad attributes, note existance of attributes depends on usage in main feature.

setPadAttributes(String, String, int) - Method in interface nxopen.die.PadChildBuilder

Sets the pad attributes, note existance of attributes depends on usage in main feature.

setPadAttributes(String, String, int) - Method in interface nxopen.die.PadParentBuilder

Sets the pad attributes, note existance of attributes depends on usage in main feature.

setPadAttributes(String, String, int) - Method in interface nxopen.die.WearPlateLocChildBuilder

Sets the pad attributes, note existance of attributes depends on usage in main feature
License requirements: ug_die_design ("Die Design")
.

setPadAttributes(String, String, int) - Method in interface nxopen.die.WearPlateLocParentBuilder

Sets the pad attributes, note existance of attributes depends on usage in main feature
License requirements: ug_die_design ("Die Design")
.

setPadDiameter(double) - Method in interface nxopen.die.HoleChildBuilder

Sets the pad diameter of the die hole.

setPadDiameter(double) - Method in interface nxopen.die.HoleParentBuilder

Sets the pad diameter of die holes.

setPadHeight(double) - Method in interface nxopen.die.HoleChildBuilder

Sets the pad height of the die hole.

setPadHeight(double) - Method in interface nxopen.die.HoleParentBuilder

Sets the pad height of die holes.

setPadHeight(double) - Method in interface nxopen.die.KeywayChildBuilder

Sets the pad height of the keyway.

setPadHeight(double) - Method in interface nxopen.die.KeywayParentBuilder

Sets the pad height of keyways.

setPadWidth(double) - Method in interface nxopen.die.KeywayChildBuilder

Sets the pad width of the keyway.

setPadWidth(double) - Method in interface nxopen.die.KeywayParentBuilder

Sets the pad width of keyways.

setPageIncrement(double) - Method in interface nxopen.blockstyler.AngularDimension

License requirements: None.

setPageIncrement(double) - Method in interface nxopen.blockstyler.DoubleBlock

License requirements: None.

setPageIncrement(double) - Method in interface nxopen.blockstyler.ExpressionBlock

License requirements: None.

setPageIncrement(double) - Method in interface nxopen.blockstyler.IntegerBlock

License requirements: None.

setPageIncrement(double) - Method in interface nxopen.blockstyler.LinearDimension

License requirements: None.

setPageIncrement(double) - Method in interface nxopen.blockstyler.OnPathDimension

License requirements: None.

setPageIncrement(double) - Method in interface nxopen.blockstyler.RadiusDimension

License requirements: None.

setPageOrientation(InspectionGraphicalReportOutputBuilder.PageOrientationType) - Method in interface nxopen.cam.InspectionGraphicalReportOutputBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setPageOrientation(WorkInstructionOutputBuilder.PageOrientationType) - Method in interface nxopen.cam.WorkInstructionOutputBuilder

License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.

setPagesAutomaticallyFlyOut(boolean) - Method in interface nxopen.preferences.SessionUserInterfaceUI

Sets the pages automatically fly outflag
License requirements: None.

setPageSize(InspectionGraphicalReportOutputBuilder.PageSizeType) - Method in interface nxopen.cam.InspectionGraphicalReportOutputBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setPageSize(WorkInstructionOutputBuilder.PageSizeType) - Method in interface nxopen.cam.WorkInstructionOutputBuilder

License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.

setPaintBrushColor(double[]) - Method in interface nxopen.facet.PaintBrushBuilder

Sets the paint brush color
License requirements: None.

setPaintBrushColor(double[]) - Method in interface nxopen.facet.PaintFacetBodyBuilder

Sets the paint brush color
License requirements: None.

setPairClearZone(Tag, Tag, Tag, Tag) - Method in interface nxopen.uf.UFClear

Deprecated.

The equivalent Open C method has retired

setPairExclusion(Tag, Tag, Tag, String) - Method in interface nxopen.uf.UFClear

Deprecated.

The equivalent Open C method has retired

setPairInclusion(Tag, Tag, Tag, String) - Method in interface nxopen.uf.UFClear

Deprecated.

The equivalent Open C method has retired

setPairingStrategy(MidSurfaceByFacePairsBuilder.PairingStrategyType) - Method in interface nxopen.features.MidSurfaceByFacePairsBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setPaper(PrintBuilder.PaperSize) - Method in interface nxopen.PrintBuilder

License requirements: None.

setParallaxFactor(int) - Method in interface nxopen.preferences.SessionVisualizationSpecialEffects

Sets the parallax factor.

setParallel(boolean) - Method in interface nxopen.InferredConstraintsBuilder

License requirements: None.

setParallel(boolean) - Method in interface nxopen.SketchAutoConstrainBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setParallelEnabled(boolean) - Method in interface nxopen.features.CurveFinderBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setParallelEnabled(boolean) - Method in interface nxopen.features.FaceRecognitionBuilder

License requirements: gateway ("UG GATEWAY")
.

setParallelismTolerance(WeldAdvisorCustomerDefault, double) - Method in interface nxopen.weld.WeldAdvisorBuilder

The weld advisor parameter Parallelism Tolerance
License requirements: ugweld ("UG WELD")
.

setParallelReinforcement(PathStockBuilder) - Method in interface nxopen.routing.DuctReinforcementBuilder

License requirements: routing_hvac ("Routing HVAC")
.

setParallelSketchGroupEnabled(boolean) - Method in interface nxopen.features.CurveFinderBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setParameter(NXObject, double, NXObject) - Method in interface nxopen.cam.PreprocessGeometryBuilder

Set tolerance and vector for facet body which is gotten from relevant solid body
License requirements: None.

setParameter(double) - Method in interface nxopen.geometricutilities.DraftPointData

Sets the point coordinates
License requirements: solid_modeling ("SOLIDS MODELING")
.

setParameter(String) - Method in interface nxopen.geometricutilities.LawBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setParameter(String) - Method in interface nxopen.tooling.ForceCalculationBuilder

License requirements: None.

setParameter(UFVariant, String, String, UFSim.UnitType, double) - Method in interface nxopen.uf.UFSim

Refer to UF_SIM_set_parameter for documentation.

setParameterActive(String, boolean) - Method in interface nxopen.cam.Cycle

To Set if parameter is active
License requirements: cam_base ("CAM BASE")
.

setParameterActive(boolean) - Method in interface nxopen.cam.UdeParameter

License requirements: cam_base ("CAM BASE")
.

setParameterData(FunctionObjectBuilder.ParameterData[]) - Method in interface nxopen.mechatronics.FunctionObjectBuilder

Sets the parameter data
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setParameterData(LogicObjectBuilder.ParameterData[]) - Method in interface nxopen.mechatronics.LogicObjectBuilder

Sets the parameter data.

setParameterData(SensorsActuatorsListBuilder.ParameterData[]) - Method in interface nxopen.mechatronics.SensorsActuatorsListBuilder

Sets all parameter data.

setParameterData(SignalAdapterBuilder.ParameterData[]) - Method in interface nxopen.mechatronics.SignalAdapterBuilder

Sets all parameter data.

setParameterDirection(IFormBuilder.ParameterDirectionOptions) - Method in interface nxopen.features.IFormBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setParameterLength(double) - Method in interface nxopen.geometricutilities.SpinePointData

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setParameterName(String) - Method in interface nxopen.display.IrayPlusMatAttr

License requirements: None.

setParameterName(String) - Method in interface nxopen.mechatronics.GanttOperationParameterBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setParameterName(String) - Method in interface nxopen.tooling.SpreadsheetDataParameter

License requirements: None.

setParameterPercent(double) - Method in interface nxopen.geometricutilities.SpinePointData

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setParameterPhysics(NXObject) - Method in interface nxopen.mechatronics.RuntimeFormulaParameterBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setParameters(double, Point3d, double, double, NXMatrix) - Method in interface nxopen.Arc

Sets the center, radius, start and end angles, and orientation matrix of the arc.

setParameters(double, Point3d, double, double) - Method in interface nxopen.Arc

Sets the center, radius, and start and end angles of the arc.

setParameters(ResultParameters) - Method in interface nxopen.cae.ResultAccess

SetsResultParameters .

setParameters(String[]) - Method in interface nxopen.cae.SimLoadRecipeMapEntry

Sets the parameters of a SimLoadRecipeMapEntry .

setParameters(Point3d, Point3d, Point3d, double) - Method in interface nxopen.Conic

Sets the start, end, anchor, rho of the conic.

setParameters(double, double, double, double, DrawingSheet.Unit, DrawingSheet.ProjectionAngleType) - Method in interface nxopen.drawings.DrawingSheet

Sets the parameters of the drawing sheet.

setParameters(double, double, double, double, double, Point3d) - Method in interface nxopen.Ellipse

Sets the parameters of the ellipse - the major/minor radii, start/end angles and the centre of the ellipse.

setParameters(FacetingParameters) - Method in interface nxopen.facet.FacetedBody

Set the faceted body parameters, it will retessellate the body with the new parameters
License requirements: None.

setParameters(double[]) - Method in interface nxopen.features.StudioSplineBuilder

Deprecated.

Deprecated in NX8.0.0. Use StudioSplineBuilderEx instead.

setParameters(double[]) - Method in interface nxopen.features.StudioSplineBuilderEx

Sets the optional parameters at defining points for a through point spline
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setParameters(String[], String[]) - Method in interface nxopen.tooling.ClearanceManagementBuilder

Set the parameter number, names and values in the tree list into builder attribute.

setParameters(String[], String[]) - Method in interface nxopen.tooling.DieDesignSettingBuilder

Set the parameter number, names and values in the tree list into builder attribute.

setParametersData(MeshParameterData) - Method in interface nxopen.features.MeshSurfaceBuilder

Sets
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

setParametersInUserControl(boolean) - Method in interface nxopen.features.shipdesign.ProfileCutoutBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setParameterSpaceFactor(double) - Method in interface nxopen.annotations.HoleCalloutSettingsBuilder

Sets the parameter space factor, which defines the horizontal space between parameters.

setParameterStatus(String, int, boolean) - Method in interface nxopen.tooling.SpreadsheetData

Sets the Lock/Hide or other status of spreadsheet parameter.

setParameterStatus(int) - Method in interface nxopen.tooling.SpreadsheetDataParameter

License requirements: None.

setParameterText(String) - Method in interface nxopen.tooling.ForceCalculationBuilder

License requirements: None.

setParameterTreeData(SpreadsheetData) - Method in interface nxopen.tooling.MoldFillingBuilder

Sets spreadsheet data.

setParameterTreeData(SpreadsheetData) - Method in interface nxopen.tooling.RunnerBuilder

Sets spreadsheet data.

setParameterUsed(boolean) - Method in interface nxopen.geometricutilities.OnPathDimensionBuilder

License requirements: None.

setParameterValue(String) - Method in interface nxopen.mechatronics.GanttOperationParameterBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setParameterValue(String) - Method in interface nxopen.tooling.SpreadsheetDataParameter

License requirements: None.

setParametricPlaneMap(SpatialMap.ParametricPlaneMapEnum) - Method in interface nxopen.fields.SpatialMapBuilder

License requirements: None.

setParamId(int) - Method in interface nxopen.mechatronics.ProxyObjectParameterBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setParams(Tag, UFPatt.Switch, UFPatt.Switch, UFPatt.Switch) - Method in interface nxopen.uf.UFPatt

Refer to UF_PATT_set_params for documentation.

setParamToggle(UFVariant, String, UFUde.ParamToggle) - Method in interface nxopen.uf.UFUde

Refer to UF_UDE_set_param_toggle for documentation.

setParantheses(BaseSurfaceFinishBuilder.ParanthesesType) - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder

Deprecated.

Deprecated in NX8.0.0. Use DraftingSurfaceFinishBuilder.parentheses() and DraftingSurfaceFinishBuilder.setParentheses(nxopen.annotations.BaseSurfaceFinishBuilder.ParenthesesType) instead.

setParantheses(BaseSurfaceFinishBuilder.ParanthesesType) - Method in interface nxopen.annotations.SurfaceFinishBuilder

Deprecated.

Deprecated in NX8.0.0. Use SurfaceFinishBuilder.parentheses() and SurfaceFinishBuilder.setParentheses(nxopen.annotations.BaseSurfaceFinishBuilder.ParenthesesType) instead.

setParent(PartSymbolFolder) - Method in interface nxopen.annotations.PartSymbolFolderBuilder

Sets parent of current folder provided current folder is not root folder
License requirements: drafting ("DRAFTING")
.

setParent(CAMObject) - Method in interface nxopen.cam.InspectionMoveBuilder

Set parent
License requirements: None.

setParent(CAMObject) - Method in interface nxopen.cam.MoveBuilder

Set parent
License requirements: None.

setParent(ExpressionGroup) - Method in interface nxopen.ExpressionGroup

Sets an expression group's parent group or null
License requirements: None.

setParent(ShipPreparationInfo) - Method in interface nxopen.features.shipdesign.ShipPreparationInfo

License requirements: nx_ship_basic ("Ship Basic Design")
.

setParent(LocalDefinitionFolder) - Method in interface nxopen.layout2d.LocalDefinitionFolderBuilder

License requirements: nx_layout ("NX Layout")
.

setParent(NXObject) - Method in interface nxopen.mechatronics.FunctionObjectBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setParent(NXObject) - Method in interface nxopen.mechatronics.LogicObjectBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setParent(SpecialFormingBuilder.ParentValue) - Method in interface nxopen.tooling.SpecialFormingBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setParentAssociativity(boolean) - Method in interface nxopen.features.BlockFeatureBuilder

License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setParentAssociativity(boolean) - Method in interface nxopen.features.ConeBuilder

License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.

setParentAssociativity(boolean) - Method in interface nxopen.features.CylinderBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setParentAssociativity(boolean) - Method in interface nxopen.features.SphereBuilder

License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.

setParentDuct(Stock) - Method in interface nxopen.routing.WindCatcherBuilder

License requirements: routing_hvac ("Routing HVAC")
.

setParentFeatureInternal(Feature) - Method in interface nxopen.features.FeatureBuilder

Set the parent features which would be internal or slaves to the feature being created or commited
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setParentFeatureInternal(boolean) - Method in interface nxopen.features.FeatureBuilder

Sets whether or not the latest timestamped parent feature of this feature should be made internal
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setParentFunction(NXObject) - Method in interface nxopen.mechatronics.RequirementBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setParentheses(BaseSurfaceFinishBuilder.ParenthesesType) - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder

License requirements: drafting ("DRAFTING")
.

setParentheses(BaseSurfaceFinishBuilder.ParenthesesType) - Method in interface nxopen.annotations.SurfaceFinishBuilder

License requirements: None.

setParentID(String) - Method in interface nxopen.mechatronics.GanttOperationBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setParentId(String) - Method in interface nxopen.mechatronics.GanttOperationConditionBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setParentLabelPrefix(String) - Method in interface nxopen.drawings.ViewDetailLabelBuilder

License requirements: drafting ("DRAFTING")
.

setParentNode(BendInsertDesignBuilder.ParentOption) - Method in interface nxopen.tooling.BendInsertDesignBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setParentNode(DieBaseBuilder.ParentNodeOpt) - Method in interface nxopen.tooling.DieBaseBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setParentNode(ShimBuilder.ParentOption) - Method in interface nxopen.tooling.ShimBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setParentNode(SmartScrewUpdateBuilder.ParentOption) - Method in interface nxopen.tooling.SmartScrewUpdateBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setParentOption(CopyPasteBuilder.ParentTransferOption) - Method in interface nxopen.features.CopyPasteBuilder

Deprecated.

Deprecated in NX8.0.0. This functionality is no longer supported.

setParentPart(CompositeCurveBuilder.PartType) - Method in interface nxopen.features.CompositeCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setParentPart(ExtractFaceBuilder.ParentPartType) - Method in interface nxopen.features.ExtractFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setParentPart(WaveDatumBuilder.ParentPartType) - Method in interface nxopen.features.WaveDatumBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setParentPart(WavePointBuilder.ParentPartType) - Method in interface nxopen.features.WavePointBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setParentPart(Part) - Method in interface nxopen.LinkedMirrorPartBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setParentPart(Part) - Method in interface nxopen.tooling.AddReusablePart

Sets the parent part, this is mainly used to set context work part of a reusable component
License requirements: None.

setParentPart(BurringInsertBuilder.ParentTypes) - Method in interface nxopen.tooling.BurringInsertBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setParentPart(FormingInsertBuilder.ParentTypes) - Method in interface nxopen.tooling.FormingInsertBuilder

License requirements: None.

setParentPart(GeneralInsertBuilder.ParentOption) - Method in interface nxopen.tooling.GeneralInsertBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setParentPart(SpecialPiercingInsertBuilder.ParentPartTypes) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setParentPartName(String) - Method in interface nxopen.tooling.BendInsertDesignBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setParentPartName(String) - Method in interface nxopen.tooling.BurringInsertBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setParentPartName(String) - Method in interface nxopen.tooling.DieBaseBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setParentPartName(String) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder

License requirements: None.

setParentPartName(String) - Method in interface nxopen.tooling.DieInsertBuilder

License requirements: None.

setParentPartName(String) - Method in interface nxopen.tooling.FormingInsertBuilder

License requirements: None.

setParentPartName(String) - Method in interface nxopen.tooling.GeneralInsertBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setParentPartName(String) - Method in interface nxopen.tooling.PiercingInsertBuilder

License requirements: None.

setParentPartName(String) - Method in interface nxopen.tooling.PunchInsertBuilder

License requirements: None.

setParentPartName(String) - Method in interface nxopen.tooling.ShimBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setParentPartName(String) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder

License requirements: None.

setParentPartType(MirrorBodyBuilder.ParentPart) - Method in interface nxopen.features.MirrorBodyBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setParentRequirement(Requirement) - Method in interface nxopen.validate.RequirementCheck

License requirements: None.

setParentSegmentOfEccentricSegment(ISegment) - Method in interface nxopen.routing.LinearPathBuilder

License requirements: routing_base ("Routing Basic")
.

setParentSmBody(Body) - Method in interface nxopen.features.sheetmetal.MigratedPanelBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setParentSpine(Section) - Method in interface nxopen.geometricutilities.SpinePointData

Sets the parent spine on which spine point is defined
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setPart(Part) - Method in interface nxopen.drafting.DrawingAutomationWizard

Sets the part from which the booklet drawings are created
License requirements: None.

setPart(Part) - Method in interface nxopen.drawings.DraftingComponentSelectionBuilder

License requirements: None.

setPart(Part) - Method in interface nxopen.drawings.StandardViewsBuilder

License requirements: nx_layout ("NX Layout")
.

setPart(Part) - Method in interface nxopen.drawings.ViewCreationWizardBuilder

License requirements: drafting ("DRAFTING")
.

setPart(Part) - Method in interface nxopen.drawings.ViewStyleBaseBuilder

License requirements: drafting ("DRAFTING")
.

setPartAxisPoint(Point) - Method in interface nxopen.cam.MultiBladeGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setPartAxisPoint(Point) - Method in interface nxopen.cam.PartAxisBuilder

License requirements: cam_base ("CAM BASE")
.

setPartAxisPoint(Point) - Method in interface nxopen.cam.RotaryFinishGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setPartAxisVector(SmartObject) - Method in interface nxopen.cam.MultiBladeGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setPartAxisVector(SmartObject) - Method in interface nxopen.cam.PartAxisBuilder

License requirements: cam_base ("CAM BASE")
.

setPartAxisVector(SmartObject) - Method in interface nxopen.cam.RotaryFinishGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setPartCategory(String) - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setPartColor(NXColor) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setPartCreation(PreviewPropertiesBuilder.PartCreationOptions) - Method in interface nxopen.PreviewPropertiesBuilder

License requirements: None.

setPartCreationType(StandardPartFrameworkBuilder.CreationType) - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setPartCset(Tag, String) - Method in interface nxopen.uf.UFWeight

Refer to UF_WEIGHT_set_part_cset for documentation.

setPartDefinition(ElectricalPartDefinitionShadow) - Method in interface nxopen.routing.electrical.ConnectorDevice

Sets part definition.

setPartDirectory(String) - Method in interface nxopen.tooling.RenameAndExportComponentBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setPartFamilyInstanceSelectionCriteria(InstanceSelectionCriteria) - Method in interface nxopen.assemblies.Component

Hooks InstanceSelectionCriteria to this component
License requirements: solid_modeling ("SOLIDS MODELING")

Created in NX9.0.0

setPartFamilyInstanceSelectionCriteria(FamilyAttribute[], String[]) - Method in interface nxopen.partfamily.InstanceSelectionCriteria

Sets criteria on InstanceSelectionCriteria .

setPartFamilyInstanceSelectionCriteria(String) - Method in interface nxopen.partfamily.InstanceSelectionCriteria

Sets criteria on InstanceSelectionCriteria .

setPartFile(String) - Method in interface nxopen.linedesigner.ReuseLibraryDragData

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setPartFile(String) - Method in interface nxopen.tooling.ReusableObject

License requirements: None.

setPartFileName(String) - Method in interface nxopen.annotations.MasterSymbolBuilder

License requirements: drafting ("DRAFTING")
.

setPartFileName(String) - Method in interface nxopen.annotations.SymbolCatalogBuilder

License requirements: nx_layout ("NX Layout")
.

setPartialHoleAngle(double) - Method in interface nxopen.annotations.HoleTableSettingsHoleFiltersBuilder

License requirements: drafting ("DRAFTING")
.

setPartiallyControlledNoteTitle(String) - Method in interface nxopen.annotations.BaseCustomSymbolBuilder

License requirements: drafting ("DRAFTING")
.

setPartiallyDefinedColor(int) - Method in interface nxopen.preferences.PartSketch

Sets the sketch partially defined constraint color
License requirements: None.

setPartiallyShaded(boolean) - Method in interface nxopen.DisplayModification

Sets the partial shading flag.

setPartiallyShaded(boolean) - Method in interface nxopen.fields.DisplayPropertiesBuilder

License requirements: None.

setPartiallyShaded(boolean) - Method in interface nxopen.preferences.PartObject

Sets the partially shaded flag for Solid and Sheets
License requirements: None.

setPartiallyShaded(Tag, boolean) - Method in interface nxopen.uf.UFObj

Refer to UF_OBJ_set_partially_shaded for documentation.

setPartialMatch(int) - Method in interface nxopen.features.MatchEdgeBuilder

License requirements: features_modeling ("FEATURES MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setPartialOption(boolean) - Method in interface nxopen.features.OffsetSurfaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setPartialRibHeight(double) - Method in interface nxopen.die.DrawDiePunchSectionBuilder

License requirements: ug_die_design ("Die Design")
.

setParticipatingDatumColor(int) - Method in interface nxopen.preferences.PartSketch

Sets the sketch participating datum curve color
License requirements: None.

setPartIdentifier(String) - Method in interface nxopen.annotations.PartIdentificationBuilder

License requirements: None.

setPartingColor(NXColor) - Method in interface nxopen.tooling.AssignPatchBuilder

License requirements: None.

setPartingManagerDataStatus(int) - Method in interface nxopen.tooling.MWPartingManagerBuilder

Set the status of the parting manager data.

setPartInStock(Tag) - Method in interface nxopen.uf.UFRoute

Refer to UF_ROUTE_set_part_in_stock for documentation.

setPartitionViewStyle(Subset.PartitionViewStyleType) - Method in interface nxopen.assemblies.Subset

License requirements: nx_4gd_integration ("4th Generation Design")
.

setPartListCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use TrackDrawingChangesReportFilterBuilder.setReportFilterStatus(nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter, boolean) instead.

setPartMaterial(String) - Method in interface nxopen.cam.CAMSetup

Part material
License requirements: cam_base ("CAM BASE")
.

setPartMaterial(String) - Method in interface nxopen.tooling.DefineNeutralFactorBuilder

License requirements: None.

setPartMaterialBuilder(NXObject) - Method in interface nxopen.cam.FeatureGeomBuilder

Deprecated.

Deprecated in NX8.0.2. Use method SetMaterial instead.

setPartMatStr(String) - Method in interface nxopen.tooling.InitProjBuilder

License requirements: None.

setPartMaxWeight(Tag, double, UFWeight.UnitsType) - Method in interface nxopen.uf.UFWeight

Refer to UF_WEIGHT_set_part_max_weight for documentation.

setPartMinWeight(Tag, double, UFWeight.UnitsType) - Method in interface nxopen.uf.UFWeight

Refer to UF_WEIGHT_set_part_min_weight for documentation.

setPartMountJunction(CartesianCoordinateSystem) - Method in interface nxopen.cam.NcmctPartMountingBuilder

License requirements: cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setPartName(String) - Method in interface nxopen.annotations.MasterCustomSymbolData

Deprecated.

Deprecated in NX9.0.0. Use MasterSymbolBuilder instead.

setPartName(String) - Method in interface nxopen.drawings.ViewStyleBaseBuilder

License requirements: drafting ("DRAFTING")
.

setPartName(String) - Method in interface nxopen.layout2d.ComponentNameBuilder

License requirements: drafting ("DRAFTING")
.

setPartName(String) - Method in interface nxopen.routing.SingleDevice

Sets the part name
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setPartName(String) - Method in interface nxopen.tooling.ClonePart

License requirements: None.

setPartNameAttribute(String) - Method in interface nxopen.preferences.SessionAssemblies

Sets the part name attribute
License requirements: None.

setPartNameDesc(Tag, String, String) - Method in interface nxopen.uf.UFUgmgr

Deprecated.

The equivalent Open C method has retired

setPartNameStyle(SessionAssemblies.PartNameOption) - Method in interface nxopen.preferences.SessionAssemblies

Sets the part name style
License requirements: None.

setPartNo(int) - Method in interface nxopen.tooling.QuickQuotationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setPartNumber(String) - Method in interface nxopen.mechatronics.ElectricalPartBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setPartNumber(String) - Method in interface nxopen.routing.SingleDevice

Sets the part number
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setPartObject(Part) - Method in interface nxopen.validate.PartNode

License requirements: None.

setPartOccurrence(Component) - Method in interface nxopen.annotations.DimensionMeasurementBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING")
.

setPartOffDepthMode(RoughTurningBuilder.PartOffDepthModeTypes) - Method in interface nxopen.cam.RoughTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setPartOffDepthValue(double) - Method in interface nxopen.cam.RoughTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setPartOffPositionMode(RoughTurningBuilder.PartOffPositionModeTypes) - Method in interface nxopen.cam.RoughTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setPartOffPositionPoint(Point) - Method in interface nxopen.cam.RoughTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setPartOffset(double) - Method in interface nxopen.cam.GeometrySet

License requirements: cam_base ("CAM BASE")
.

setPartOperationBuilder(PartOperationCreateBuilder) - Method in interface nxopen.layout2d.ComponentNameBuilder

Sets PartOperationCreateBuilder
License requirements: drafting ("DRAFTING")

Created in NX10.0.0

setPartOperationCreateBuilder(PartOperationCreateBuilder) - Method in interface nxopen.annotations.MasterSymbolBuilder

Sets PartOperationBuilder
License requirements: drafting ("DRAFTING")

Created in NX10.0.0

setPartOperationCreateBuilder(PartOperationCreateBuilder) - Method in interface nxopen.annotations.SymbolCatalogBuilder

Sets PartOperationBuilder
License requirements: drafting ("DRAFTING")

Created in NX10.0.0

setPartOperationCreateBuilder(PartOperationBuilder) - Method in interface nxopen.FileNew

Sets PartOperationBuilder
License requirements: None.

setPartPreviewMode(BasePart.PartPreview) - Method in interface nxopen.BasePart

Sets the preview mode
License requirements: None.

setPartRefSet(Tag, String) - Method in interface nxopen.uf.UFWeight

Refer to UF_WEIGHT_set_part_ref_set for documentation.

setParts(Component[]) - Method in interface nxopen.routing.PathStockBuilder

Set the parts to use for the Routing.PathStockBuilder.AssignMethod#FROM_PARTS method of stock assignment
License requirements: routing_base ("Routing Basic")

Created in NX7.5.0

setPartsAmout(int) - Method in interface nxopen.tooling.QuickQuotationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setPartSaveOption(Tag, boolean) - Method in interface nxopen.uf.UFWeight

Refer to UF_WEIGHT_set_part_save_option for documentation.

setPartSearchPath(Tag) - Method in interface nxopen.uf.UFRoute

Refer to UF_ROUTE_set_part_search_path for documentation.

setPartSelection(Preferences.PartSelectionTypes) - Method in interface nxopen.cam.Preferences

Deprecated.

Deprecated in NX8.0.0. Use CAM.Preferences#getSelection and CAM.Preferences#setSelection instead.

setPartSpecToOpen(String) - Method in interface nxopen.pdm.PartOperationCreateBuilder

Sets the Part Spec of the part to open in case of Select Template Dialog This is only applicable if PartOperationCreateBuilder.OperationSubType is set to PartOperationCreateBuilder.OperationSubType.SELECT_TEMPLATE partSpecTopOpen can be a CLI format (@DB/MFKID/RevId) or full TCIN file specification (starting with %UGMGR)
License requirements: None.

setPartsToCleanup(PartCleanup.CleanupParts) - Method in interface nxopen.PartCleanup

Sets the option that specifies what parts will be cleaned up when PartCleanup.doCleanup() is called.

setPartsToRename(BasePart[]) - Method in interface nxopen.pdm.PartOperationCreateBuilder

Sets the Parts To Rename on the Builder.

setPartSubType(String) - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setPartSymbol(boolean) - Method in interface nxopen.annotations.BaseCustomSymbolBuilder

License requirements: drafting ("DRAFTING")
.

setPartSymbol(boolean) - Method in interface nxopen.annotations.ImportSymbolBuilder

License requirements: nx_layout ("NX Layout")
.

setPartSymbol(boolean) - Method in interface nxopen.annotations.ReplaceSymbolBuilder

License requirements: drafting ("DRAFTING")
.

setPartSymbol(boolean) - Method in interface nxopen.annotations.SymbolCatalogBuilder

License requirements: nx_layout ("NX Layout")
.

setPartThickReal(double) - Method in interface nxopen.tooling.InitProjBuilder

License requirements: None.

setPartToUse(BasePart) - Method in interface nxopen.assemblies.DesignElementBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setPartType(OnestepUnformBuilder.Part) - Method in interface nxopen.bodydes.OnestepUnformBuilder

License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setPartType(String) - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setPartType(int) - Method in interface nxopen.linedesigner.ReuseLibraryDragData

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setPartTypeFlag(RouteManager.PartType) - Method in interface nxopen.routing.RouteManager

License requirements: routing_base ("Routing Basic")
.

setPartUnitsEnum(ASCImporter.Units) - Method in interface nxopen.ASCImporter

License requirements: nx_layout ("NX Layout")
.

setPartUnitStr(String) - Method in interface nxopen.tooling.InitProjBuilder

License requirements: None.

setPass(int) - Method in interface nxopen.cam.InPathEventDataBuilder

License requirements: cam_base ("CAM BASE")
.

setPassengerSideStandard(MirrorCertificationBuilder.PassengerSideStandardsType) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPassword(boolean) - Method in interface nxopen.blockstyler.StringBlock

License requirements: None.

setPassword(Part, String, String, String, String) - Method in interface nxopen.PartCollection

Deprecated.

Deprecated in NX11.0.0. Use overloaded SetPassword instead.

setPassword(Part, String, String, String, String, PartCollection.SetProtectionOn) - Method in interface nxopen.PartCollection

This method is for setting a new password for a part.

setPasteMethod(ReusableObjectPasteBuilder.PasteMethods) - Method in interface nxopen.tooling.ReusableObjectPasteBuilder

License requirements: None.

setPasteOption(boolean) - Method in interface nxopen.features.AdmMoveFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setPasteOption(PasteFaceBuilder.PasteOptionType) - Method in interface nxopen.features.PasteFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setPasteType(CutCopyPasteBuilder.TypePaste) - Method in interface nxopen.drafting.CutCopyPasteBuilder

License requirements: None.

setPatch(boolean) - Method in interface nxopen.features.FillHoleBuilder

License requirements: nx_freeform_1 ("basic freeform modeling"), solid_modeling ("SOLIDS MODELING")
.

setPatch(boolean) - Method in interface nxopen.features.FlowBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setPatch(MeshParameterData.Type) - Method in interface nxopen.MeshParameterData

Sets
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

setPatchColor(NXColor) - Method in interface nxopen.tooling.AssignPatchBuilder

License requirements: None.

setPatchColor(double, double, double) - Method in interface nxopen.tooling.AssignPatchBuilder

Deprecated.

Deprecated in NX8.5.0. Use Tooling.AssignPatchBuilder#setPatchColor instead.

setPatchComplexGeometryAreas(boolean) - Method in interface nxopen.features.EdgeBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setPatchSolutionFlag(boolean) - Method in interface nxopen.features.FeatureBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setPatchSurface(boolean) - Method in interface nxopen.tooling.EdgePatchBuilder

License requirements: None.

setPatchSurfaceFilename(String) - Method in interface nxopen.features.FeatureBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setPatchType(ThroughCurvesBuilder.PatchTypes) - Method in interface nxopen.features.ThroughCurvesBuilder

License requirements: features_modeling ("FEATURES MODELING") OR nx_freeform_1 ("basic freeform modeling")
.

setPatchType(SolidPatchBuilder.SolidPatchType) - Method in interface nxopen.tooling.SolidPatchBuilder

License requirements: None.

setPath(String) - Method in interface nxopen.annotations.MasterCustomSymbolData

Deprecated.

Deprecated in NX9.0.0. Use MasterSymbolBuilder instead.

setPath(String) - Method in interface nxopen.annotations.MasterSymbolBuilder

Setting Path retrieved from Global method at builder side
License requirements: drafting ("DRAFTING")
.

setPath(String) - Method in interface nxopen.annotations.SymbolCatalogBuilder

License requirements: nx_layout ("NX Layout")
.

setPath(String) - Method in interface nxopen.blockstyler.FileSelection

License requirements: None.

setPath(String) - Method in interface nxopen.blockstyler.FolderSelection

License requirements: None.

setPath(TaggedObject) - Method in interface nxopen.blockstyler.OnPathDimension

License requirements: None.

setPath(String) - Method in interface nxopen.cae.SimLoadRecipeSource

License requirements: nx_masterfem ("Finite Element Modeling")
.

setPath(Curve) - Method in interface nxopen.die.DieLimitsBuilder

Set the path used for the limits.

setPath(Section) - Method in interface nxopen.features.GeomcopyBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setPath(String) - Method in interface nxopen.layout2d.DefineComponentBuilder

Sets the path to store the 2D Component
License requirements: nx_layout ("NX Layout")
.

setPath(String) - Method in interface nxopen.layout2d.InsertComponentBuilder

Sets the path of the reuse library for the 2D Component
License requirements: nx_layout ("NX Layout")
.

setPath(String) - Method in interface nxopen.layout2d.MakeComponentUniqueBuilder

Sets the path to store the 2D Component
License requirements: nx_layout ("NX Layout")
.

setPath(String) - Method in interface nxopen.layout2d.ReplaceComponentBuilder

License requirements: nx_layout ("NX Layout")
.

setPathAdjustmentAngleDirection(FlexibleCableBuilder.PathAdjustmentAngleDirectionOptions) - Method in interface nxopen.features.sheetmetal.FlexibleCableSegment

Sets the path adjustment angle direction.

setPathBrowser(String) - Method in interface nxopen.tooling.ElectrodeInitializationBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setPathCurvesFromCurves(NXObject[]) - Method in interface nxopen.mechatronics.PathConstraintJointBuilder

Set the path curves that constrain the movement of the attachment
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setPathDatatype(RoadBuilder.PathDatatypeChoices) - Method in interface nxopen.motion.RoadBuilder

License requirements: mechanisms ("MECHANISMS")
.

setPathDisplayType(DisplayPath.PathDisplayTypes) - Method in interface nxopen.cam.DisplayPath

License requirements: cam_base ("CAM BASE")
.

setPathDisplayType(OperationDisplayOptionsBuilder.PathDisplayTypes) - Method in interface nxopen.cam.OperationDisplayOptionsBuilder

License requirements: cam_base ("CAM BASE")
.

setPathFeature(CAMObject, String) - Method in interface nxopen.cam.InspectionOperationCollection

Sets the Inspection Feature referenced in an Inspection Path.

setPathFileName(String) - Method in interface nxopen.motion.RoadBuilder

License requirements: mechanisms ("MECHANISMS")
.

setPathForwardThroughExtensionVector(boolean) - Method in interface nxopen.mechanicalrouting.PathTransitionBuilder

License requirements: routing_base ("Routing Basic")
.

setPathFrame(CoordinateSystem) - Method in interface nxopen.mechatronics.PathConstraintFrameBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setPathId(int) - Method in interface nxopen.cae.PostGraphAlongPathBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setPathInLib(String) - Method in interface nxopen.linedesigner.ReuseLibraryDragData

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setPathLengthAnnotationEndPoints(Point, Point) - Method in interface nxopen.formboard.PathLengthAnnotationBuilder

Create and initialize the Path Length Annotation
License requirements: routing_harness ("Routing Harness")
.

setPathLengthMultiplier(String) - Method in interface nxopen.routing.electrical.Connection

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setPathLengthOffset(String) - Method in interface nxopen.routing.electrical.Connection

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setPathName(String) - Method in interface nxopen.geometricutilities.PointsFromFileBuilder

License requirements: None.

setPathName(String) - Method in interface nxopen.tooling.InitProjectBuilder

License requirements: None.

setPathNormalType(OperationDisplayOptionsBuilder.PathNormalTypes) - Method in interface nxopen.cam.OperationDisplayOptionsBuilder

License requirements: cam_base ("CAM BASE")
.

setPathObjects(NXObject[]) - Method in interface nxopen.die.DieLimitsBuilder

Set the objects used to create the path.

setPathOpName(String) - Method in interface nxopen.cam.InspectionPathBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setPathOrderEnum(InspectionLinkPmiBuilder.PathOrderTypes) - Method in interface nxopen.cam.InspectionLinkPmiBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setPathParameter(double) - Method in interface nxopen.mechatronics.PathConstraintFrameBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setPathPositionType(CloseRangeVisibilityBuilder.PathPositionTypes) - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPathPreview(boolean) - Method in interface nxopen.mechatronics.PathConstraintJointBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setPathReverseDirection(boolean) - Method in interface nxopen.features.shipdesign.EdgeCutBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setPathReverseDirection(boolean) - Method in interface nxopen.features.shipdesign.StiffenerBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setPathStockBuilder(PathStockBuilder) - Method in interface nxopen.routing.LinearPathBuilder

Sets the builder for assigning stock to the new path.

setPathType(PathConstraintJointBuilder.PathTypes) - Method in interface nxopen.mechatronics.PathConstraintJointBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setPathVector(Direction) - Method in interface nxopen.cam.OperationDisplayOptionsBuilder

License requirements: cam_base ("CAM BASE")
.

setPattern(String) - Method in interface nxopen.annotations.HatchBuilder

Deprecated.

Deprecated in NX7.5.0. Use HatchFillSettingsBuilder instead.

setPattern(String) - Method in interface nxopen.annotations.HatchFillSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setPattern(String) - Method in interface nxopen.cae.WeldBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setPattern(MultiRamp.Types) - Method in interface nxopen.cam.MultiRamp

License requirements: cam_base ("CAM BASE")
.

setPatternCenterPoint(Point) - Method in interface nxopen.cam.AreaMillingNonSteepContainment

License requirements: cam_base ("CAM BASE")
.

setPatternCenterPoint(Point) - Method in interface nxopen.cam.DmAmBuilder

License requirements: cam_base ("CAM BASE")
.

setPatternCenterPoint(Point) - Method in interface nxopen.cam.DmBndBuilder

License requirements: cam_base ("CAM BASE")
.

setPatternCenterPoint(Point) - Method in interface nxopen.cam.DmSpiralBuilder

License requirements: cam_base ("CAM BASE")
.

setPatternDataToSave(PartSaveOptions.PatternData) - Method in interface nxopen.PartSaveOptions

Sets the option indicating how pattern data will be saved while saving a part
License requirements: None.

setPatternDefinedBy(int) - Method in interface nxopen.annotations.LightweightSectionBuilder

License requirements: geometric_tol ("GDT")
.

setPatternDirection(AreaMillingNonSteepContainment.PatternDirectionTypes) - Method in interface nxopen.cam.AreaMillingNonSteepContainment

License requirements: cam_base ("CAM BASE")
.

setPatternDirection(FlowCutSteepContainment.PatternDirectionTypes) - Method in interface nxopen.cam.FlowCutSteepContainment

License requirements: cam_base ("CAM BASE")
.

setPatternDirection(CutParametersPatternDirectionTypes) - Method in interface nxopen.cam.MillCutParameters

License requirements: cam_base ("CAM BASE")
.

setPatternDisplayFrequency(int) - Method in interface nxopen.cam.OperationDisplayOptionsBuilder

License requirements: cam_base ("CAM BASE")
.

setPatternDisplayType(OperationDisplayOptionsBuilder.PatternDisplayTypes) - Method in interface nxopen.cam.OperationDisplayOptionsBuilder

License requirements: cam_base ("CAM BASE")
.

setPatternFeature(NXObject) - Method in interface nxopen.tooling.ReusableObjectPasteBuilder

License requirements: None.

setPatternFile(String) - Method in interface nxopen.cam.OperationDisplayOptionsBuilder

License requirements: cam_base ("CAM BASE")
.

setPatternLimitsBy(PointSetBuilder.PatternLimitsType) - Method in interface nxopen.features.PointSetBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setPatternLimitsEndPoint(Point) - Method in interface nxopen.features.PointSetBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setPatternLimitsStartPoint(Point) - Method in interface nxopen.features.PointSetBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setPatternMethod(PatternFeatureBuilder.PatternMethodOptions) - Method in interface nxopen.features.PatternFeatureBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setPatternRepeatFactor(double) - Method in interface nxopen.display.Image

License requirements: None.

setPatternRepeatFactor(double) - Method in interface nxopen.display.Wall

Deprecated.

Deprecated in NX10.0.0. This functionality is moved to Image .

setPatternSketch(Sketch) - Method in interface nxopen.tooling.ReusableObjectPasteBuilder

License requirements: None.

setPatternType(DurabilityLoadPatternBuilder.PatternTypeEnum) - Method in interface nxopen.cae.DurabilityLoadPatternBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setPatternType(PatternDefinition.PatternEnum) - Method in interface nxopen.geometricutilities.PatternDefinition

License requirements: None.

setPatternXOffset(double) - Method in interface nxopen.cam.OperationDisplayOptionsBuilder

License requirements: cam_base ("CAM BASE")
.

setPatternYOffset(double) - Method in interface nxopen.cam.OperationDisplayOptionsBuilder

License requirements: cam_base ("CAM BASE")
.

setPatternZOffset(double) - Method in interface nxopen.cam.OperationDisplayOptionsBuilder

License requirements: cam_base ("CAM BASE")
.

setPauseAfterDisplayFlag(boolean) - Method in interface nxopen.cam.OperationDisplayOptionsBuilder

License requirements: cam_base ("CAM BASE")
.

setPauseDuration(int) - Method in interface nxopen.preferences.SessionUserInterfaceUI

Sets the pause duration
License requirements: None.

setPauseOnFirstGougeOrCollision(boolean) - Method in interface nxopen.cam.GougeCheckBuilder

License requirements: cam_base ("CAM BASE")
.

setPauseOnGouge(boolean) - Method in interface nxopen.cam.CutDepthChecker

License requirements: cam_base ("CAM BASE")
.

setPaxFileName(String) - Method in interface nxopen.drawings.MarkAsTemplateBuilder

License requirements: drafting ("DRAFTING")
.

setPcsName(String) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setPcsName(String) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setPcsName(String) - Method in interface nxopen.cam.InspectionMeasDataBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setPdmDesc(String, String) - Method in interface nxopen.uf.UFClone

Refer to UF_CLONE_set_pdm_desc for documentation.

setPdmName(String, String) - Method in interface nxopen.uf.UFClone

Refer to UF_CLONE_set_pdm_name for documentation.

setPeakValleyTolerance(double) - Method in interface nxopen.cae.DurabilityDamageEvaluationBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setPeakValleyTolerance(double) - Method in interface nxopen.cae.DurabilityDataControlBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setPedalReferencePoint(Point) - Method in interface nxopen.features.vehicledesign.BaseDataDriverBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPedalReferencePointActive(boolean) - Method in interface nxopen.features.vehicledesign.BaseDataDriverBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPendulumProfile(PendulumPlacementBuilder.PendulumProfileType) - Method in interface nxopen.features.vehicledesign.PendulumPlacementBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPenetrationDepth(double) - Method in interface nxopen.motion.BodyContactAdams

Deprecated.

Deprecated in NX8.0.0. Obtion the exression using BodyContactAdams.penetrationDepthExpression() to query or edit it.

setPenetrationDepth(double) - Method in interface nxopen.motion.BodyContactRecurdyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using BodyContactRecurdyn.penetrationDepthExpression() to query or edit it.

setPenetrationDepth(double) - Method in interface nxopen.motion.CurveContactAdams

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using CurveContactAdams.penetrationDepthExpression() to query or edit it.

setPenetrationDepth(double) - Method in interface nxopen.motion.CurveContactRecurdyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using CurveContactRecurdyn.penetrationDepthExpression() to query or edit it.

setPenetrationDepth(String) - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. Use WeldGrooveBuilder.penetrationDepth() instead.

setPenetrationType(PenetrationRequest.PenetrationType) - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder

License requirements: nx_penetration_mgmt ("Penetration Management")
.

setPercent(boolean) - Method in interface nxopen.IPlane

Sets the arclenth or the percent value
License requirements: None.

setPercentage(double) - Method in interface nxopen.cam.StopPosition

License requirements: cam_base ("CAM BASE")
.

setPercentage(double) - Method in interface nxopen.cam.TurnOverlap

License requirements: cam_base ("CAM BASE")
.

setPercentage(double) - Method in interface nxopen.facet.DecimateFacetBodyBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setPercentageForce(double) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setPercentageForceArray(double[]) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder

Sets the percentage of force.

setPercentFeedback(double) - Method in interface nxopen.cam.ProbeControlParametersBuilder

License requirements: None.

setPercentLowerLimit(double) - Method in interface nxopen.cam.FeedsOptimizationData

License requirements: cam_base ("CAM BASE")
.

setPercentOfDegression(double) - Method in interface nxopen.cam.StepoverBuilder

License requirements: cam_base ("CAM BASE")
.

setPercentOffset(double) - Method in interface nxopen.cae.ElementExtrudeBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setPercentOffset(double) - Method in interface nxopen.cae.ElementProjectBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setPercentOffset(double) - Method in interface nxopen.cae.NodeProjectBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setPercentOfTool(double) - Method in interface nxopen.cam.DisplaySilhouette

License requirements: cam_base ("CAM BASE")
.

setPercentOfTool(double) - Method in interface nxopen.cam.OperationDisplayOptionsBuilder

License requirements: cam_base ("CAM BASE")
.

setPercentReduction(double) - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setPercentUpperLimit(double) - Method in interface nxopen.cam.FeedsOptimizationData

License requirements: cam_base ("CAM BASE")
.

setPercentUsed(boolean) - Method in interface nxopen.geometricutilities.OnPathDimensionBuilder

License requirements: None.

setPerformFidelityCheckOnImport(boolean) - Method in interface nxopen.preferences.SessionNXGateway

Sets the perform fidelity check on import flag for I-DEAS
License requirements: None.

setPerformOrthotropicAnalysis(boolean) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setPerformOrthotropicAnalysis(boolean) - Method in interface nxopen.cae.DurabilityEventStrengthSettingsBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setPeriodic(boolean) - Method in interface nxopen.features.CurveOnSurfaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setPeriodic(boolean) - Method in interface nxopen.features.PolylineBuilder

License requirements: features_modeling ("FEATURES MODELING")
.

setPeriodic(boolean) - Method in interface nxopen.features.StudioSplineBuilder

Deprecated.

Deprecated in NX8.0.0. Use StudioSplineBuilderEx instead.

setPeriodic(boolean) - Method in interface nxopen.features.StudioSplineBuilderEx

License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setPermanentBoundary(NXObject) - Method in interface nxopen.cam.ToolPathEditorBuilder

License requirements: None.

setPerpendicular(boolean) - Method in interface nxopen.annotations.LeaderData

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setPerpendicular(boolean) - Method in interface nxopen.InferredConstraintsBuilder

License requirements: None.

setPerpendicular(boolean) - Method in interface nxopen.SketchAutoConstrainBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setPerpendicularBaselineDirectionReversed(boolean) - Method in interface nxopen.annotations.OrdinateBaselineBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setPerpendicularEnabled(boolean) - Method in interface nxopen.features.FaceRecognitionBuilder

License requirements: gateway ("UG GATEWAY")
.

setPerpendicularReinforcement(PathStockBuilder) - Method in interface nxopen.routing.DuctReinforcementBuilder

License requirements: routing_hvac ("Routing HVAC")
.

setPersistent(boolean) - Method in interface nxopen.AttributeTemplatesBuilder

License requirements: None.

setPersistent(boolean) - Method in interface nxopen.positioning.Constraint

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setPersistentInterpolator(boolean) - Method in interface nxopen.fields.FieldTable

License requirements: None.

setPersistentTag(int) - Method in interface nxopen.mechatronics.GenericSensorBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setPersistentTag(int) - Method in interface nxopen.mechatronics.LimitSwitchBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setPersistentTag(int) - Method in interface nxopen.mechatronics.RelayBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setPerspective(boolean) - Method in interface nxopen.drawings.PerspectiveViewStyle

Sets the status of perspective
License requirements: drafting ("DRAFTING")
.

setPerspective(boolean) - Method in interface nxopen.drawings.ViewStylePerspectiveBuilder

License requirements: drafting ("DRAFTING")
.

setPerspective(Tag, int, double, double) - Method in interface nxopen.uf.UFView

Refer to UF_VIEW_set_perspective for documentation.

setPerspectiveDistance(double) - Method in interface nxopen.display.CameraBuilder

License requirements: None.

setPerspectiveDistance(double) - Method in interface nxopen.drawings.PerspectiveViewStyle

Sets the value of perspective distance
License requirements: drafting ("DRAFTING")
.

setPerspectiveDistance(double) - Method in interface nxopen.drawings.ViewStylePerspectiveBuilder

License requirements: drafting ("DRAFTING")
.

setPerturbationFraction(double) - Method in interface nxopen.cae.optimization.DAOStopCondition

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setPhase(double) - Method in interface nxopen.cae.ResultVariable

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setPhaseAngle(double) - Method in interface nxopen.cae.CrossSectionParameters

Sets the phase angle at which result will be evaluated.

setPhaseAngle(double) - Method in interface nxopen.cae.DeformationParameters

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setPhaseAngle(double) - Method in interface nxopen.cae.responsesimulation.FunctionComponentData

License requirements: nx_response_anlys ("NX Response Analysis")
.

setPhaseAngle(double) - Method in interface nxopen.cae.ResultParameters

Sets the phase angle at which result will be evaluated.

setPhaseAngle(double) - Method in interface nxopen.cae.xyplot.GeneralDisplayStyles

License requirements: nx_ftk ("NX Advanced Graphing")
.

setPhaseAngle(double) - Method in interface nxopen.motion.DriverOperation

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using DriverOperation.phaseAngleExpression() to query or edit it.

setPhaseRangeOption(PhaseRangeOption) - Method in interface nxopen.cae.xyplot.GeneralDisplayStyles

License requirements: nx_ftk ("NX Advanced Graphing")
.

setPhysicalHystereticScalingFactor(double) - Method in interface nxopen.cae.responsesimulation.PhysicalDampingSettings

License requirements: nx_response_anlys ("NX Response Analysis")
.

setPhysicalHystereticScalingFactor(double) - Method in interface nxopen.motion.FlexPhysicalDampingSettings

License requirements: mechanisms ("MECHANISMS")
.

setPhysicalMaterialPropertyValue(String, MaterialOptions) - Method in interface nxopen.cae.PropertyTable

Sets the material options MaterialOptions
License requirements: None.

setPhysicalPropertyOffset(int) - Method in interface nxopen.cae.SolverAppendOption

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setPhysicalPropertyTables(PhysicalPropertyTable[]) - Method in interface nxopen.cae.ImportSimulationBuilder

Set physical property tables to import
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setPhysicalTypes(ModelUpdateDesignVariablesRapidCreateBuilder.PhysicalTypesEnum) - Method in interface nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder

License requirements: nx_correl_update ("FE Model Update")
.

setPhysicalViscousScalingFactor(double) - Method in interface nxopen.cae.responsesimulation.PhysicalDampingSettings

License requirements: nx_response_anlys ("NX Response Analysis")
.

setPhysicalViscousScalingFactor(double) - Method in interface nxopen.motion.FlexPhysicalDampingSettings

License requirements: mechanisms ("MECHANISMS")
.

setPhysics(NXObject) - Method in interface nxopen.mechatronics.GanttOperationBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setPhysicsObject(NXObject) - Method in interface nxopen.mechatronics.GanttOperationConditionBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setPhysicsObject(String, int, NXObject) - Method in interface nxopen.mechatronics.RuntimeBehaviorBuilder

Sets physics object
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setPickPoint(Point3d) - Method in interface nxopen.annotations.Associativity

Sets the pick point
License requirements: None.

setPickPoint(Point3d) - Method in interface nxopen.features.FillHoleBuilder

License requirements: nx_freeform_1 ("basic freeform modeling"), solid_modeling ("SOLIDS MODELING")
.

setPickPoint(Point3d) - Method in interface nxopen.features.RadialDimensionBuilder

License requirements: None.

setPickPointOnAttachment(Point3d) - Method in interface nxopen.features.shipdesign.BracketBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setPickPointOnReinforcement(Point3d) - Method in interface nxopen.features.shipdesign.BracketBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setPickSequentially(boolean) - Method in interface nxopen.cae.ResultProbeBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setPids(boolean) - Method in interface nxopen.cae.ResultVariable

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setPieceLengthLock(boolean) - Method in interface nxopen.routing.OverstockBuilder

License requirements: routing_advanced ("Routing Advanced") OR routing_harness ("Routing Harness") OR routing_cabling ("Routing Cabling") OR routing_pipetube ("Routing Piping and Tubing") OR routing_hvac ("Routing HVAC") OR routing_platform ("Routing Platform") OR routing_pid ("Routing PID")
.

setPierceAndExtrude(boolean) - Method in interface nxopen.die.FlangeTaskBuilder

Sets the pierce and extrude setting of the flange task.

setPierceBounds(DirectionOption, IProfile[]) - Method in interface nxopen.die.PierceTaskBuilder

Sets the pierce bounds of the pierce task.

setPierceHoleDirection(ILocation) - Method in interface nxopen.die.PierceHoleChildBuilder

Sets the pierce hole direction
License requirements: ug_die_design ("Die Design")
.

setPierceHoleLocation(ILocation[]) - Method in interface nxopen.die.PierceHoleChildBuilder

Sets the locations of the pierce hole
License requirements: ug_die_design ("Die Design")
.

setPierceHoleShape(DirectionOption, IProfile[]) - Method in interface nxopen.die.PierceHoleChildBuilder

Sets the shape of the pierce hole
License requirements: ug_die_design ("Die Design")
.

setPierceObjects(IProfile[]) - Method in interface nxopen.die.PierceItemBuilder

Sets the objects making up the hole to be pierced.

setPierceType(FlangeTaskBuilder.PierceTypes) - Method in interface nxopen.die.FlangeTaskBuilder

Sets the pierce type of the flange task
License requirements: die_engineering ("DIE ENGINEERING")
.

setPierceType(ScrapDesignBuilder.DefScrapType) - Method in interface nxopen.tooling.ScrapDesignBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setPiercingColor(NXColor) - Method in interface nxopen.tooling.QuickQuotationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setPiercingColor(NXColor) - Method in interface nxopen.tooling.ScrapDesignBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setPillarDirection(Direction) - Method in interface nxopen.features.shipdesign.EditStockBuilder

Sets the pillar direction.

setPilotingColor(NXColor) - Method in interface nxopen.tooling.ScrapDesignBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setPinDirection(Direction) - Method in interface nxopen.annotations.LocatorDesignatorBuilder

License requirements: None.

setPinIdentifier(String) - Method in interface nxopen.routing.TerminalPort

Sets the pin identifier (name) of the TerminalPort
License requirements: routing_base ("Routing Basic")

Created in NX4.0.0

setPinRadius(double) - Method in interface nxopen.motion.JointFrictionAdams

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using Motion.JointFrictionAdams#pinRadiusExpression to query or edit it.

setPinRadius(double) - Method in interface nxopen.motion.JointFrictionRecurDyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using Motion.JointFrictionRecurDyn#pinRadiusExpression to query or edit it.

setPinToScreen(boolean) - Method in interface nxopen.markup.MarkupObject

License requirements: None.

setPitch(double) - Method in interface nxopen.cam.HoleBossGeom

License requirements: cam_base ("CAM BASE")
.

setPitch(double) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setPitch(double) - Method in interface nxopen.tooling.BlankLayoutBuilder

License requirements: None.

setPitch(double) - Method in interface nxopen.tooling.DirectUnfoldBuilder

License requirements: None.

setPitch(double) - Method in interface nxopen.tooling.IntermediateStageBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setPitch(double) - Method in interface nxopen.tooling.QuickQuotationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setPitch(double) - Method in interface nxopen.tooling.ReliefDesignBuilder

License requirements: None.

setPitchAngle(double) - Method in interface nxopen.features.vehicledesign.HoodVisibilityBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPitchResult(double) - Method in interface nxopen.tooling.BlankNestingBuilder

License requirements: None.

setPitchType(SearchModelViewBuilder.ValueComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder

License requirements: None.

setPitchValue(double) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder

License requirements: None.

setPivotPoint(Point) - Method in interface nxopen.features.MoveFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setPivotPoint(Point) - Method in interface nxopen.features.StudioXformBuilder

Deprecated.

Deprecated in NX8.5.0. Use StudioXformBuilderEx instead.

setPivotPoint(Point) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPixelColorTolerance(int) - Method in interface nxopen.display.ImageBaseBuilder

License requirements: None.

setPixelWidthOptions(boolean, double, int[]) - Method in interface nxopen.preferences.PartVisualizationLine

Modifies options that control width appearance in the graphics window.

setPixelWidths(int[]) - Method in interface nxopen.preferences.PartVisualizationLine

Modifies pixel widths used in the graphics window.

setPlaceDefaultElbow(boolean) - Method in interface nxopen.mechanicalrouting.CreatePathBuilder

License requirements: routing_base ("Routing Basic")
.

setPlacement(StrainGagePlacementType) - Method in interface nxopen.cae.responsesimulation.StrainGageBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setPlacement(IsoparametricCurvesBuilder.PlacementTypes) - Method in interface nxopen.features.IsoparametricCurvesBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setPlacement(SectionAnalysisExBuilder.PlacementType) - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setPlacementCount(int) - Method in interface nxopen.features.sheetmetal.GussetBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setPlacementFace(ISurface) - Method in interface nxopen.features.HoleFeatureBuilder

License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.

setPlacementFaces(DisplayableObject[]) - Method in interface nxopen.features.shipdesign.OrientationDefinitionBuilder

Sets the faces or datum that are being processed into the builder.

setPlacementMethod(PillarBuilder.CreationMethod) - Method in interface nxopen.features.shipdesign.PillarBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setPlacementMethod(SteelSupportBuilder.CreationMethod) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setPlacementOffset(double) - Method in interface nxopen.die.KeywayChildBuilder

Sets the placement offset of the keyway.

setPlacementOffset(double) - Method in interface nxopen.die.KeywayParentBuilder

Sets the placement offset of keyways.

setPlacementOption(MeshPointMultipleOnCurveBuilder.PlacementType) - Method in interface nxopen.cae.MeshPointMultipleOnCurveBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setPlacementOption(NodesOnCurveBuilder.PlacementType) - Method in interface nxopen.cae.NodesOnCurveBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setPlacementOption(ViewCreationWizardBuilder.Option) - Method in interface nxopen.drawings.ViewCreationWizardBuilder

License requirements: drafting ("DRAFTING")
.

setPlacementPlane(Plane) - Method in interface nxopen.features.shipdesign.CustomBracketBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setPlacementSide(OrientationDefinitionBuilder.PlacementSideTypes) - Method in interface nxopen.features.shipdesign.OrientationDefinitionBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setPlacementType(StandardViewsBuilder.Placement) - Method in interface nxopen.drawings.StandardViewsBuilder

Deprecated.

Deprecated in NX6.0.2. Use the type of the multiple view placement

setPlacementType(GussetBuilder.PlacementTypes) - Method in interface nxopen.features.sheetmetal.GussetBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setPlacementType(AlongGuideCutBuilder.CreationMethod) - Method in interface nxopen.features.shipdesign.AlongGuideCutBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setPlacementType(CornerCutBuilder.CutOption) - Method in interface nxopen.features.shipdesign.CornerCutBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setPlacementType(CustomBracketBuilder.CreationMethod) - Method in interface nxopen.features.shipdesign.CustomBracketBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setPlacementType(Cutout2Builder.CreationMethod) - Method in interface nxopen.features.shipdesign.Cutout2Builder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setPlacementType(ShipCutoutBuilder.CreationMethod) - Method in interface nxopen.features.shipdesign.ShipCutoutBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setPlacementType(ShipEndCutBuilder.CreationMethod) - Method in interface nxopen.features.shipdesign.ShipEndCutBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setPlacementType(WeldCut2Builder.CreationMethod) - Method in interface nxopen.features.shipdesign.WeldCut2Builder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setPlacementType(WeldCutBuilder.CreationMethod) - Method in interface nxopen.features.shipdesign.WeldCutBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setPlacePartOperation(boolean) - Method in interface nxopen.routing.PlacePartBuilder

Set a flag which tells the builder whether the part being placed is replacing an existing part in the assembly.

setPlanarityTolerance(WeldAdvisorCustomerDefault, double) - Method in interface nxopen.weld.WeldAdvisorBuilder

The weld advisor parameter Planarity Tolerance
License requirements: ugweld ("UG WELD")
.

setPlanarizeArbitraryPlane(Plane) - Method in interface nxopen.features.StudioXformBuilder

Deprecated.

Deprecated in NX8.5.0. Use StudioXformBuilderEx instead.

setPlanarizeArbitraryPlane(Plane) - Method in interface nxopen.features.StudioXformBuilderEx

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setPlanarizeDirection(StudioXformBuilder.PlanarizeDirectionType) - Method in interface nxopen.features.StudioXformBuilder

Deprecated.

Deprecated in NX8.5.0. Use StudioXformBuilderEx instead.

setPlanarizeDirection(StudioXformBuilderEx.PlanarizeDirectionType) - Method in interface nxopen.features.StudioXformBuilderEx

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setPlanarizeMethod(StudioXformBuilder.PlanarizeMethodType) - Method in interface nxopen.features.StudioXformBuilder

Deprecated.

Deprecated in NX8.5.0. Use StudioXformBuilderEx instead.

setPlanarizeMethod(StudioXformBuilderEx.PlanarizeMethodType) - Method in interface nxopen.features.StudioXformBuilderEx

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setPlanarizePlaneOption(StudioXformBuilder.PlanarizePlaneOptionType) - Method in interface nxopen.features.StudioXformBuilder

Deprecated.

Deprecated in NX8.5.0. Use StudioXformBuilderEx instead.

setPlanarizeProjectionPlane(StudioXformBuilderEx.PlanarizeProjectionPlaneType) - Method in interface nxopen.features.StudioXformBuilderEx

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setPlanarOffsetHeight(String) - Method in interface nxopen.die.SteelInsertSectionBuilder

License requirements: ug_die_design ("Die Design")
.

setPlanarReflectionToggle(boolean) - Method in interface nxopen.display.TrueShadingBuilder

License requirements: None.

setPlanarShadowToggle(boolean) - Method in interface nxopen.display.TrueShadingBuilder

License requirements: None.

setPlanarSurfacePreferred(boolean) - Method in interface nxopen.features.GuidedExtensionBuilderEx

License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setPlanarTolerance(double) - Method in interface nxopen.features.ExtrudeBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setPlane(Post.ClipPlane) - Method in interface nxopen.cae.ClippingParameters

Set plane
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setPlane(Plane) - Method in interface nxopen.cae.ElementReflectBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setPlane(Plane) - Method in interface nxopen.cae.NodeReflectBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setPlane(StrainGageOrientationPlane) - Method in interface nxopen.cae.responsesimulation.StrainGageBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setPlane(Plane) - Method in interface nxopen.cam.BoundarySet

License requirements: cam_base ("CAM BASE")
.

setPlane(Plane) - Method in interface nxopen.cam.InspectionOperationTransformBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setPlane(NXObject) - Method in interface nxopen.cam.LowerLimit

License requirements: cam_base ("CAM BASE")
.

setPlane(Plane) - Method in interface nxopen.cam.MirrorBuilder

License requirements: cam_base ("CAM BASE")
.

setPlane(SmartObject) - Method in interface nxopen.cam.NcmPlanarEngRetBuilder

License requirements: cam_base ("CAM BASE")
.

setPlane(Plane) - Method in interface nxopen.cam.NcmScEngRetBuilder

License requirements: cam_base ("CAM BASE")
.

setPlane(Plane) - Method in interface nxopen.cam.OperationTransformBuilder

License requirements: cam_base ("CAM BASE")
.

setPlane(Plane) - Method in interface nxopen.die.DieLocationBuilder

License requirements: None.

setPlane(ISurface) - Method in interface nxopen.die.FlangeSteelRibChildBuilder

Sets the plane of the Flange Steel Rib
License requirements: ug_die_design ("Die Design")
.

setPlane(ISurface) - Method in interface nxopen.die.HoleChildBuilder

Sets the plane of the die hole.

setPlane(IOrientation) - Method in interface nxopen.die.KeywayChildBuilder

Sets the plane of the keyway.

setPlane(Point3d, Point3d, Matrix3x3) - Method in interface nxopen.display.DynamicSectionBuilder

Sets a section plane to be the specified plane The plane is created at the specified origin with the specified rotation matrix.

setPlane(Plane) - Method in interface nxopen.display.PlaneGridBuilder

License requirements: None.

setPlane(Plane) - Method in interface nxopen.facet.ExtrudeFacetBodyBuilder

License requirements: studio_free_form ("STUDIO FREE FORM") OR die_engineering ("DIE ENGINEERING")
.

setPlane(Plane) - Method in interface nxopen.facet.SnipFacetBodyBuilder

License requirements: None.

setPlane(Plane) - Method in interface nxopen.features.AeroFlangeBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setPlane(Plane) - Method in interface nxopen.features.AeroRibBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setPlane(ISurface) - Method in interface nxopen.features.EmbossProjection

Sets the projection plane
License requirements: solid_modeling ("SOLIDS MODELING")
.

setPlane(ISurface) - Method in interface nxopen.features.SectionEditBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setPlane(Plane) - Method in interface nxopen.features.shipdesign.EndCutBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setPlane(Plane) - Method in interface nxopen.features.shipdesign.PlaneListBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setPlane(Plane) - Method in interface nxopen.features.subdivision.StartSymmetricModelingBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setPlane(Plane) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPlane(Plane) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setPlane(Plane) - Method in interface nxopen.geometricanalysis.DistanceAnalysisBuilder

License requirements: None.

setPlane(Plane) - Method in interface nxopen.geometricanalysis.RadiusAnalysisBuilder

License requirements: None.

setPlane(SectionPlaneBuilder.PlaneType) - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionPlaneBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setPlane(Plane) - Method in interface nxopen.geometricutilities.BlendSetbackBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setPlane(Plane) - Method in interface nxopen.geometricutilities.MovePoleBuilder

License requirements: None.

setPlane(Plane) - Method in interface nxopen.geometricutilities.SpinePlaneBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setPlane(Plane) - Method in interface nxopen.mechanicalrouting.TransformBlockBuilder

License requirements: routing_base ("Routing Basic")
.

setPlane(Plane) - Method in interface nxopen.weld.JointmarkBuilder

License requirements: ugweld ("UG WELD")
.

setPlane1(Plane) - Method in interface nxopen.features.sheetmetal.AdvancedFlangeBuilder

License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setPlane1(Plane) - Method in interface nxopen.features.shipdesign.PlanePairBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setPlane1Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPlane1LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPlane1PointLeft(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarWizardBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPlane1PointRight(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarWizardBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPlane1Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPlane1RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPlane2(Plane) - Method in interface nxopen.features.sheetmetal.AdvancedFlangeBuilder

License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setPlane2(Plane) - Method in interface nxopen.features.shipdesign.PlanePairBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setPlane5Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPlane5LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPlane5PointLeft(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarWizardBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPlane5PointRight(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarWizardBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPlane5Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPlane5RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPlaneAPoint(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofWizardBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPlaneAsString(String) - Method in interface nxopen.blockstyler.OrientXpress

License requirements: None.

setPlaneBPoint(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofWizardBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPlaneColor(double[]) - Method in interface nxopen.facet.DetectPrimitivesBuilder

Sets the plane color
License requirements: None.

setPlaneConstrainedToggle(boolean) - Method in interface nxopen.features.GeneralConicBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setPlaneConstructor(Plane) - Method in interface nxopen.features.MirrorFeatureBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setPlaneCPoint(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofWizardBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPlaneDefine(NXObject) - Method in interface nxopen.tooling.CalculateAreaBuilder

License requirements: None.

setPlaneDPoint(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofWizardBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPlaneGridToggle(boolean) - Method in interface nxopen.display.TrueShadingBuilder

License requirements: None.

setPlaneHeight(double) - Method in interface nxopen.weld.DatumCommonBuilder

License requirements: ugweld ("UG WELD")
.

setPlaneHelpPoint(Point) - Method in interface nxopen.geometricutilities.FacePlaneSelectionBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setPlaneLocation(double) - Method in interface nxopen.weld.EasyPatternBuilder

License requirements: ugweld ("UG WELD")
.

setPlaneMethod(PlaneBuilder.PlaneMethodType) - Method in interface nxopen.annotations.PlaneBuilder

License requirements: None.

setPlaneMethod(ShellTemplateBuilder.PlaneLocationTypes) - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setPlaneMethod(EasyPatternBuilder.PlaneMethodTypes) - Method in interface nxopen.weld.EasyPatternBuilder

License requirements: ugweld ("UG WELD")
.

setPlaneNormal(Vector3d) - Method in interface nxopen.geometricutilities.BoundaryDefinitionBuilder

Sets normal of the plane in which boundary is defined
License requirements: studio_free_form ("STUDIO FREE FORM")
.

setPlaneNormal(Direction) - Method in interface nxopen.geometricutilities.SectionPlaneData

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setPlaneOffset(double) - Method in interface nxopen.die.HoleChildBuilder

Sets the plane offset of the die hole.

setPlaneOffset(double) - Method in interface nxopen.die.HoleParentBuilder

Sets the plane offset of die holes.

setPlaneOffsetFixedToggle(boolean) - Method in interface nxopen.display.TrueShadingBuilder

License requirements: None.

setPlaneOffsetValue(double) - Method in interface nxopen.display.TrueShadingBuilder

License requirements: None.

setPlaneOption(ViewProjectionPlaneBuilder.PlaneOptions) - Method in interface nxopen.drawings.ViewProjectionPlaneBuilder

License requirements: nx_layout ("NX Layout")
.

setPlaneOption(MirrorCurveBuilder.PlaneOptions) - Method in interface nxopen.features.MirrorCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setPlaneOption(MirrorFeatureBuilder.PlaneOptions) - Method in interface nxopen.features.MirrorFeatureBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setPlaneOption(MirrorPattern.PlaneOptions) - Method in interface nxopen.geometricutilities.MirrorPattern

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setPlaneOption(OrientXpressBuilder.Plane) - Method in interface nxopen.geometricutilities.OrientXpressBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setPlaneOption(Sketch.PlaneOption) - Method in interface nxopen.SketchInPlaceBuilder

License requirements: None.

setPlaneOrientation(Plane) - Method in interface nxopen.features.shipdesign.RollingLineBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setPlaneOrientation(SketchAlongPathBuilder.PlaneOrientationType) - Method in interface nxopen.SketchAlongPathBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setPlaneOrientationAxis(Direction) - Method in interface nxopen.SketchAlongPathBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setPlaneOrigin(Point) - Method in interface nxopen.geometricutilities.SectionPlaneData

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setPlaneOverlapLogic(PlaneSearchTerm.PlaneOverlapLogicType) - Method in interface nxopen.assemblies.PlaneSearchTermBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setPlanePoint1(Point) - Method in interface nxopen.geometricutilities.SectionPlaneData

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setPlanePoint2(Point) - Method in interface nxopen.geometricutilities.SectionPlaneData

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setPlaneReference(Plane) - Method in interface nxopen.SketchInPlaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT")
.

setPlanesAtAngles(double[], double[], int[]) - Method in interface nxopen.cam.SpunOutlineGeom

Define the section planes at angles
License requirements: cam_base ("CAM BASE")
.

setPlanesThroughPoints(Point[], double[], int[]) - Method in interface nxopen.cam.SpunOutlineGeom

Define the section planes through points
License requirements: cam_base ("CAM BASE")
.

setPlaneThickness(double) - Method in interface nxopen.display.DynamicSectionBuilder

Sets the thickness between active plane pair.

setPlaneToProjectTo(Plane) - Method in interface nxopen.features.ProjectCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setPlaneToRestrictMotion(Plane) - Method in interface nxopen.drafting.CutCopyPasteBuilder

License requirements: drafting ("DRAFTING")
.

setPlaneType(BoundarySet.PlaneTypes) - Method in interface nxopen.cam.BoundarySet

License requirements: cam_base ("CAM BASE")
.

setPlaneType(SectionViewBuilder.PlaneTypes) - Method in interface nxopen.features.shipdesign.SectionViewBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setPlaneType(WeldLabelBuilder.OrientationPlaneType) - Method in interface nxopen.weld.WeldLabelBuilder

License requirements: ugweld ("UG WELD") OR structure_weld ("STRUCTURE WELD")
.

setPlaneType(WeldPmiBuilder.OrientationPlaneType) - Method in interface nxopen.weld.WeldPmiBuilder

License requirements: ugweld ("UG WELD") OR structure_weld ("STRUCTURE WELD")
.

setPlaneWidth(double) - Method in interface nxopen.weld.DatumCommonBuilder

License requirements: ugweld ("UG WELD")
.

setPlaneXform(NXObject) - Method in interface nxopen.cam.NcmClearanceBuilder

License requirements: cam_base ("CAM BASE")
.

setPlateAppliedCharx(CharacteristicList) - Method in interface nxopen.routing.PlatformCreatorBuilder

Sets the plate charx which is used for platform plate
License requirements: routing_platform ("Routing Platform")
.

setPlateBoundaryTrimType(int, PlateBoundaryOptionBuilder.TrimTypes) - Method in interface nxopen.features.shipdesign.PlateBuilder

Sets plate boundary trim type
License requirements: nx_ship_detail ("Ship Detail Design")
.

setPlateClearanceEighth(double) - Method in interface nxopen.tooling.ClearanceManagementBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setPlateClearanceFifth(double) - Method in interface nxopen.tooling.ClearanceManagementBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setPlateClearanceFirst(double) - Method in interface nxopen.tooling.BurringInsertBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setPlateClearanceFirst(double) - Method in interface nxopen.tooling.ClearanceManagementBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setPlateClearanceFirst(double) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setPlateClearanceFourth(double) - Method in interface nxopen.tooling.ClearanceManagementBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setPlateClearanceFourth(double) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setPlateClearanceNinth(double) - Method in interface nxopen.tooling.ClearanceManagementBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setPlateClearanceSecond(double) - Method in interface nxopen.tooling.BurringInsertBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setPlateClearanceSecond(double) - Method in interface nxopen.tooling.ClearanceManagementBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setPlateClearanceSecond(double) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setPlateClearanceSeventh(double) - Method in interface nxopen.tooling.ClearanceManagementBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setPlateClearanceSixth(double) - Method in interface nxopen.tooling.ClearanceManagementBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setPlateClearanceTenth(double) - Method in interface nxopen.tooling.ClearanceManagementBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setPlateClearanceThird(double) - Method in interface nxopen.tooling.BurringInsertBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setPlateClearanceThird(double) - Method in interface nxopen.tooling.ClearanceManagementBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setPlateClearanceThird(double) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setPlateClosureType(EditCornerBuilder.PlateClosureTypeOptions) - Method in interface nxopen.features.sheetmetal.EditCornerBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setPlateLength(double) - Method in interface nxopen.tooling.DieBaseBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setPlatePart(CharacteristicList) - Method in interface nxopen.routing.PlatformCreatorBuilder

Sets the plate part which data is used for plaform plate
License requirements: routing_platform ("Routing Platform")
.

setPlateSize(int) - Method in interface nxopen.features.shipdesign.SteelCollarPlateBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setPlatesNumber(DieBaseBuilder.PlatesNumberOpt) - Method in interface nxopen.tooling.DieBaseBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setPlateThicknessExponent(double) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setPlateThicknessRatio(double) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setPlateWidth(double) - Method in interface nxopen.tooling.DieBaseBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setPlaybackSpeed(int) - Method in interface nxopen.MovieManager

Sets the movie playback speed.

setPlaybackSpeed(MovieSettingsBuilder.PlaybackSpeedChoices) - Method in interface nxopen.MovieSettingsBuilder

License requirements: None.

setPlayMode(int) - Method in interface nxopen.motion.SpreadsheetRunControl

License requirements: mechanisms ("MECHANISMS")
.

setPlayModes(PlayButtonsBuilder.PlayModeValues) - Method in interface nxopen.geometricutilities.PlayButtonsBuilder

License requirements: None.

setPlcBit(int) - Method in interface nxopen.sim.KinematicSinumerikCaBuilder

License requirements: nx_sinumerik_ca ("Sinumerik Collision Avoidance")
.

setPlcInitState(KinematicSinumerikCaBuilder.PlcInitStateTypes) - Method in interface nxopen.sim.KinematicSinumerikCaBuilder

License requirements: nx_sinumerik_ca ("Sinumerik Collision Avoidance")
.

setPlcUsage(KinematicSinumerikCaBuilder.PlcUsageTypes) - Method in interface nxopen.sim.KinematicSinumerikCaBuilder

License requirements: nx_sinumerik_ca ("Sinumerik Collision Avoidance")
.

setPlmxmlFileName(String) - Method in interface nxopen.mechatronics.FunctionObjectBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setPlotDrawingImages(boolean) - Method in interface nxopen.uf.UFDrf

Refer to UF_DRF_set_plot_drawing_images for documentation.

setPlotEnable(boolean) - Method in interface nxopen.motion.GraphBuilder

Deprecated.

Deprecated in NX11.0.0. Use Motion.GraphObjectBuilder instead.

setPlotQuality(SessionVisualizationHighQualityImage.PlotQualityType) - Method in interface nxopen.preferences.SessionVisualizationHighQualityImage

Sets the quality of the plot of the High Quality Image.

setPlotStyle(GraphBuilder.PlotStyleChoices) - Method in interface nxopen.motion.GraphBuilder

Deprecated.

Deprecated in NX11.0.0. Use Motion.GraphObjectBuilder instead.

setPlotterText(String) - Method in interface nxopen.PlotBuilder

License requirements: None.

setPlotType(GraphFromResultProbeBuilder.PlotType) - Method in interface nxopen.cae.GraphFromResultProbeBuilder

The plot type will be set
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setPlotType(SimBcPlotContoursBuilder.PlotType) - Method in interface nxopen.cae.SimBcPlotContoursBuilder

Sets plot type
License requirements: nx_masterfem ("Finite Element Modeling")
.

setPlotType(PlotType) - Method in interface nxopen.cae.xyplot.PlotParameters

License requirements: None.

setPlotType(PlotBuilder.PlotTypes) - Method in interface nxopen.PlotBuilder

License requirements: None.

setPlungeDirection(CutParametersPlungeDirectionTypes) - Method in interface nxopen.cam.MillCutParameters

License requirements: cam_base ("CAM BASE")
.

setPly(int) - Method in interface nxopen.cae.PostJtExportBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setPlyBottom(boolean) - Method in interface nxopen.cae.LaminateGraphicalReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setPlyBottom(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setPlyExportOption(LaminateGraphicalReportBuilder.PlyExportOptionType) - Method in interface nxopen.cae.LaminateGraphicalReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setPlyFailureTheory(LaminatePly.PlyFailureTheoryType) - Method in interface nxopen.cae.LaminatePly

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setPlyid(int) - Method in interface nxopen.cae.ResultVariable

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setPlyMaterialByName(String) - Method in interface nxopen.cae.LaminatePly

Sets the ply material by name.

setPlyMiddle(boolean) - Method in interface nxopen.cae.LaminateGraphicalReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setPlyMiddle(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setPlynum(int) - Method in interface nxopen.cae.ResultMeasureResultOptions

Set the ply num in result option
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setPlySelect(int) - Method in interface nxopen.cae.FlatPatternsBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setPlyStrain(boolean) - Method in interface nxopen.cae.LaminateGraphicalReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setPlyStrain(boolean) - Method in interface nxopen.cae.LaminateQuickReportBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setPlyStrainOutput(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setPlyStrainRule(LaminateGraphicalReportBuilder.EnvelopeRule) - Method in interface nxopen.cae.LaminateGraphicalReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setPlyStrainRule(LaminateQuickReportBuilder.EnvelopeRule) - Method in interface nxopen.cae.LaminateQuickReportBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setPlyStrainRule(LaminateSpreadsheetReportBuilder.EnvelopeRule) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setPlyStress(boolean) - Method in interface nxopen.cae.LaminateGraphicalReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setPlyStress(boolean) - Method in interface nxopen.cae.LaminateQuickReportBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setPlyStressCoordSys(LaminateSpreadsheetReportBuilder.CoordinateSystemType) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setPlyStressMaxP(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setPlyStressMaxS(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setPlyStressMinP(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setPlyStressOutput(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setPlyStressRule(LaminateGraphicalReportBuilder.EnvelopeRule) - Method in interface nxopen.cae.LaminateGraphicalReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setPlyStressRule(LaminateQuickReportBuilder.EnvelopeRule) - Method in interface nxopen.cae.LaminateQuickReportBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setPlyStressRule(LaminateSpreadsheetReportBuilder.EnvelopeRule) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setPlyStressXX(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setPlyStressXY(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setPlyStressYY(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setPlyStressYZ(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setPlyStressZX(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setPlyStressZZ(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setPlyTop(boolean) - Method in interface nxopen.cae.LaminateGraphicalReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setPlyTop(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setPmarkFrequency(int) - Method in interface nxopen.preferences.SessionModeling

Sets the features/mark.

setPmi(PmiOption) - Method in interface nxopen.drawings.ViewStyleInheritPmiBuilder

License requirements: drafting ("DRAFTING")
.

setPmi(NXObject) - Method in interface nxopen.weld.FilletBuilder

License requirements: ugweld ("UG WELD")
.

setPmiData(boolean) - Method in interface nxopen.ObjectTypeSelector

License requirements: None.

setPmiDimensionFromRevolved(boolean) - Method in interface nxopen.drawings.InheritPmiViewStyle

License requirements: drafting ("DRAFTING")
.

setPmiDimensionFromRevolved(boolean) - Method in interface nxopen.drawings.ViewCreationWizardBuilder

License requirements: drafting ("DRAFTING")
.

setPmiFromRevolved(boolean) - Method in interface nxopen.drawings.ViewStyleInheritPmiBuilder

License requirements: drafting ("DRAFTING")
.

setPmiPreferences(PmiPreferences) - Method in interface nxopen.preferences.AnnotationPreferences

Sets the global PMI preferences for the part
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setPmiRegionHeight(double) - Method in interface nxopen.annotations.PmiPreferences

Sets the rectangular region height
License requirements: None.

setPmiRegionInnerDiameter(double) - Method in interface nxopen.annotations.PmiPreferences

Sets the circular/annular region inner diameter
License requirements: None.

setPmiRegionOuterDiameter(double) - Method in interface nxopen.annotations.PmiPreferences

Sets the circular/annular region outer diameter
License requirements: None.

setPmiRegionWidth(double) - Method in interface nxopen.annotations.PmiPreferences

Sets the rectangular region width
License requirements: None.

setPmiSupportForGeometrySharing(boolean) - Method in interface nxopen.annotations.PmiPreferences

License requirements: None.

setPmiToDrawing(boolean) - Method in interface nxopen.drawings.ViewStyleInheritPmiBuilder

License requirements: drafting ("DRAFTING")
.

setPmiTrackingPropertyStatus(String, boolean) - Method in interface nxopen.annotations.PmiTrackingPropertiesBuilder

Set the modified tracking status of Inherit PMI properties
License requirements: drafting ("DRAFTING")
.

setPmiType(SearchModelViewBuilder.PmiTypes) - Method in interface nxopen.annotations.SearchModelViewBuilder

License requirements: None.

setPmiTypeMask(int) - Method in interface nxopen.drawings.ViewStyleInheritPmiBuilder

License requirements: drafting ("DRAFTING")
.

setPmiTypes(PmiFilterByType.Type[]) - Method in interface nxopen.annotations.PmiFilterByType

Sets the PMI types on the PMI filter
License requirements: geometric_tol ("GDT")
.

setPmiTypes(int) - Method in interface nxopen.drawings.ViewCreationWizardBuilder

License requirements: drafting ("DRAFTING")
.

setPmiViews(String[]) - Method in interface nxopen.annotations.PmiFilterByView

Sets the model views on the PMI filter.

setPntOrigin(Point) - Method in interface nxopen.formboard.FaceAnnotationBuilder

License requirements: routing_harness ("Routing Harness")
.

setPoint(Point) - Method in interface nxopen.Axis

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setPoint(String, Point3d) - Method in interface nxopen.blockstyler.PropertyList

Sets the point value for the given property name.

setPoint(Point3d) - Method in interface nxopen.blockstyler.SpecifyPoint

License requirements: None.

setPoint(Point3d) - Method in interface nxopen.blockstyler.SpecifyVector

License requirements: None.

setPoint(Point) - Method in interface nxopen.cae.connections.PointLocation

License requirements: nx_masterfem ("Finite Element Modeling")
.

setPoint(Point) - Method in interface nxopen.cae.MeshPointProjectBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setPoint(Point) - Method in interface nxopen.cae.NodeCreateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setPoint(Point) - Method in interface nxopen.cam.BoundaryTurnBlank

License requirements: cam_base ("CAM BASE")
.

setPoint(Point) - Method in interface nxopen.cam.FirstPlunge

License requirements: cam_base ("CAM BASE")
.

setPoint(Point) - Method in interface nxopen.cam.InitialProfilePlunge

License requirements: cam_base ("CAM BASE")
.

setPoint(Point) - Method in interface nxopen.cam.InPathEventDataBuilder

License requirements: cam_base ("CAM BASE")
.

setPoint(Point) - Method in interface nxopen.cam.LaserControlPoint

License requirements: cam_base ("CAM BASE")
.

setPoint(Point) - Method in interface nxopen.cam.LaserLinearMove

License requirements: cam_base ("CAM BASE")
.

setPoint(Point) - Method in interface nxopen.cam.LaserPiercingPoint

License requirements: cam_base ("CAM BASE")
.

setPoint(Point) - Method in interface nxopen.cam.MoveToPointBuilder

License requirements: None.

setPoint(Point) - Method in interface nxopen.cam.NcmAvoidancePointBuilder

License requirements: cam_base ("CAM BASE")
.

setPoint(NXObject) - Method in interface nxopen.cam.NcmClearanceBuilder

License requirements: cam_base ("CAM BASE")
.

setPoint(Point) - Method in interface nxopen.cam.NormalToToolAxisMoveBuilder

License requirements: None.

setPoint(Point) - Method in interface nxopen.cam.ProbeCalibrateLengthMoveBuilder

License requirements: cam_base ("CAM BASE")
.

setPoint(Point) - Method in interface nxopen.cam.ProbeCalibrateSphereMoveBuilder

License requirements: cam_base ("CAM BASE")
.

setPoint(Point) - Method in interface nxopen.cam.ProbeCalibrateStylusMoveBuilder

License requirements: None.

setPoint(Point) - Method in interface nxopen.cam.ProbeInspectBorebossMoveBuilder

License requirements: None.

setPoint(Point) - Method in interface nxopen.cam.ProbeInspectPointMoveBuilder

License requirements: cam_base ("CAM BASE")
.

setPoint(Point) - Method in interface nxopen.cam.ProbeInspectSurfacePointMoveBuilder

License requirements: None.

setPoint(Point) - Method in interface nxopen.cam.ProjVecCiBuilder

License requirements: cam_base ("CAM BASE")
.

setPoint(Point) - Method in interface nxopen.cam.RotaryPointMoveBuilder

License requirements: None.

setPoint(Point) - Method in interface nxopen.cam.RotaryPolarMoveBuilder

License requirements: None.

setPoint(Point) - Method in interface nxopen.cam.StopPosition

License requirements: cam_base ("CAM BASE")
.

setPoint(Point) - Method in interface nxopen.cam.TeachmodeLinearMoveBuilder

License requirements: cam_base ("CAM BASE")
.

setPoint(Point) - Method in interface nxopen.cam.ToolAxisBase

License requirements: cam_base ("CAM BASE")
.

setPoint(Point) - Method in interface nxopen.cam.ToolAxisTilt

License requirements: cam_base ("CAM BASE")
.

setPoint(Point) - Method in interface nxopen.cam.TrimPlane

License requirements: cam_base ("CAM BASE")
.

setPoint(Point) - Method in interface nxopen.cam.TrimPoint

License requirements: cam_base ("CAM BASE")
.

setPoint(Point) - Method in interface nxopen.cam.TurnEngageRetractBuilder

License requirements: cam_base ("CAM BASE")
.

setPoint(Point) - Method in interface nxopen.cam.TurnMoveToPointBuilder

License requirements: None.

setPoint(Point) - Method in interface nxopen.cam.TurnProbeInspectPointMoveBuilder

License requirements: cam_base ("CAM BASE")
.

setPoint(Point) - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder

License requirements: cam_base ("CAM BASE")
.

setPoint(Point) - Method in interface nxopen.cam.UdeParameter

License requirements: cam_base ("CAM BASE")
.

setPoint(Point) - Method in interface nxopen.cam.WedmPointDefinitionBuilder

License requirements: cam_base ("CAM BASE")
.

setPoint(Point) - Method in interface nxopen.die.DieLocationBuilder

License requirements: None.

setPoint(Point) - Method in interface nxopen.die.PointChildBuilder

Sets the location of the point.

setPoint(Point) - Method in interface nxopen.die.PressureSystemChildBuilder

Sets the location of the pressure system.

setPoint(String) - Method in interface nxopen.die.WearPlateLocChildBuilder

License requirements: ug_die_design ("Die Design")
.

setPoint(Point) - Method in interface nxopen.drawings.SectionLineSegmentBuilder

License requirements: drafting ("DRAFTING")
.

setPoint(Point) - Method in interface nxopen.drawings.SectionLineSegmentPointBuilder

License requirements: drafting ("DRAFTING")
.

setPoint(Point) - Method in interface nxopen.features.DatumAxisBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setPoint(Point) - Method in interface nxopen.features.GeodesicPointBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setPoint(double) - Method in interface nxopen.features.GeodesicTrimBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setPoint(Point) - Method in interface nxopen.features.GeometricConstraintData

License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setPoint(Point) - Method in interface nxopen.features.GlobalShapingPointOffsetBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setPoint(Point) - Method in interface nxopen.features.PointFeatureBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setPoint(Point) - Method in interface nxopen.features.ScaleBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setPoint(Point) - Method in interface nxopen.features.sheetmetal.BridgeTransitionBuilder

License requirements: nx_flexible_pcb ("NX Flexible PCB") OR nx_sheet_metal ("NX Sheet Metal")
.

setPoint(Point) - Method in interface nxopen.features.shipdesign.PenetrationAssociationBuilder

License requirements: nx_penetration_mgmt ("Penetration Management")
.

setPoint(Point) - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder

License requirements: nx_penetration_mgmt ("Penetration Management")
.

setPoint(Point) - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design") OR routing_base ("Routing Basic")
.

setPoint(Point) - Method in interface nxopen.geometricanalysis.FaceAnalysisNormalsBuilder

License requirements: None.

setPoint(Point) - Method in interface nxopen.geometricutilities.GeometryLocationData

License requirements: None.

setPoint(Point) - Method in interface nxopen.geometricutilities.PatternReferencePointServiceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setPoint(Point) - Method in interface nxopen.mechatronics.DistanceSensorBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setPoint(Point) - Method in interface nxopen.mechatronics.HingeJointBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setPoint(Point) - Method in interface nxopen.motion.PointOnCurveBuilder

License requirements: mechanisms ("MECHANISMS")
.

setPoint(Point) - Method in interface nxopen.motion.PointOnSurfaceBuilder

License requirements: mechanisms ("MECHANISMS")
.

setPoint(String, Point3d) - Method in interface nxopen.PropertyContainer

Sets the point value for the given property name.

setPoint(Point) - Method in interface nxopen.RegionPoint

License requirements: solid_modeling ("SOLIDS MODELING")
.

setPoint(Point) - Method in interface nxopen.routing.electrical.AssignProxyBuilder

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setPoint(Point) - Method in interface nxopen.routing.IRoutePosition

Sets the Point that specifies the location of the IRoutePosition object.

setPoint(UFVariant, String, Tag) - Method in interface nxopen.uf.UFUde

Refer to UF_UDE_set_point for documentation.

setPoint(Point) - Method in interface nxopen.weld.JointmarkPointsBuilder

License requirements: ugweld ("UG WELD")
.

setPoint(int) - Method in interface nxopen.weld.WeldPointBuilder

Set the selected point
License requirements: ugweld ("UG WELD")
.

setPoint1(Point) - Method in interface nxopen.cae.ElementSplitBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setPoint1(Point) - Method in interface nxopen.features.DatumAxisBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setPoint1(Point) - Method in interface nxopen.features.FitSurfaceBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setPoint1(Point) - Method in interface nxopen.features.shipdesign.PointPairBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setPoint1(Point) - Method in interface nxopen.FourPointSurfaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setPoint2(Point) - Method in interface nxopen.cae.ElementSplitBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setPoint2(Point) - Method in interface nxopen.features.DatumAxisBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setPoint2(Point) - Method in interface nxopen.features.FitSurfaceBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setPoint2(Point) - Method in interface nxopen.features.shipdesign.PointPairBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setPoint2(Point) - Method in interface nxopen.FourPointSurfaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setPoint3(Point) - Method in interface nxopen.features.FitSurfaceBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setPoint3(Point) - Method in interface nxopen.FourPointSurfaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setPoint3Value(Point3d) - Method in interface nxopen.cam.CAMAttribute

Set the feature attribute point3 value for a point3 type attribute
License requirements: cam_base ("CAM BASE"), cam_base ("CAM BASE")
.

setPoint4(Point) - Method in interface nxopen.features.FitSurfaceBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setPoint4(Point) - Method in interface nxopen.FourPointSurfaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setPointA(Point) - Method in interface nxopen.features.VariableOffsetBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setPointA(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPointAFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPointAndDirection(Point, Direction) - Method in interface nxopen.features.DatumAxisBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setPointAndDirection(Point, Direction) - Method in interface nxopen.features.DatumPlaneBuilder

Sets point and direction
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setPointB(Point) - Method in interface nxopen.features.VariableOffsetBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setPointB(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPointBFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPointBrightnessMode(PointCloudBuilder.BrightnessModes) - Method in interface nxopen.display.PointCloudBuilder

License requirements: nx_point_cloud_view ("NX Point Cloud Viewer")
.

setPointC(Point) - Method in interface nxopen.features.VariableOffsetBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setPointC(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPointCFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPointColorMode(PointCloudBuilder.ColorModes) - Method in interface nxopen.display.PointCloudBuilder

License requirements: nx_point_cloud_view ("NX Point Cloud Viewer")
.

setPointCount(int) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setPointCoverageChanged(boolean) - Method in interface nxopen.cam.InspectionUVGridBuilder

Flag indicating whether point coverage changed.

setPointCreate(SuppressHoleBuilder.OptionPointCreate) - Method in interface nxopen.cae.SuppressHoleBuilder

License requirements: None.

setPointD(Point) - Method in interface nxopen.features.VariableOffsetBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setPointD(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPointData(int, NXObject, double, double) - Method in interface nxopen.cam.InspectionPathPointBuilder

Create a new path point, name changed if not unique
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setPointData(int, NXObject, TurnAvoidancePathPointsBuilder.MotionTypes, TurnAvoidancePathPointsBuilder.FeedrateModesTypes, double, TurnAvoidancePathPointsBuilder.CustomFeedrateUnitTypes, TurnAvoidancePathPointsBuilder.PointStatus, int, NXObject, int, NXObject) - Method in interface nxopen.cam.TurnAvoidancePathPointsBuilder

Create a new avoidance path point, name maybe changed if not unique.

setPointDataDefinition(InspectionCurveFeatureBuilder.PointDataDefinitionType) - Method in interface nxopen.cam.InspectionCurveFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setPointDataDefinition(InspectionSurfaceFeatureBuilder.PointDataDefinitionType) - Method in interface nxopen.cam.InspectionSurfaceFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setPointDataFile(String) - Method in interface nxopen.display.PointCloudBuilder

License requirements: nx_point_cloud_view ("NX Point Cloud Viewer")
.

setPointDefines(OverstockBuilder.PointType) - Method in interface nxopen.routing.OverstockBuilder

License requirements: routing_advanced ("Routing Advanced") OR routing_harness ("Routing Harness") OR routing_cabling ("Routing Cabling") OR routing_pipetube ("Routing Piping and Tubing") OR routing_hvac ("Routing HVAC") OR routing_platform ("Routing Platform") OR routing_pid ("Routing PID")
.

setPointDefinitionChanged(boolean) - Method in interface nxopen.cam.InspectionCurveFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setPointDefinitionChanged(boolean) - Method in interface nxopen.cam.InspectionSurfaceFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setPointDensity(double) - Method in interface nxopen.display.PointCloudBuilder

License requirements: nx_point_cloud_view ("NX Point Cloud Viewer")
.

setPointDetail(boolean) - Method in interface nxopen.cam.InspectionAnalyzeOutputBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setPointDFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPointEnd(Point) - Method in interface nxopen.cae.AttachElementsBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setPointForRamp(Point) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder

License requirements: None.

setPointFrom(Point) - Method in interface nxopen.tooling.LayoutRepositionBuilder

License requirements: None.

setPointFromOrigin(Point) - Method in interface nxopen.features.BlockFeatureBuilder

License requirements: None.

setPointHelix(boolean) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setPointInFormingRegion(NXObject) - Method in interface nxopen.features.OvercrownBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setPointInRegion(Point) - Method in interface nxopen.die.FillBuilder

Sets the point in region of the area fill
License requirements: die_engineering ("DIE ENGINEERING")
.

setPointInRegion(Point) - Method in interface nxopen.die.FlangeTaskBuilder

Sets the keep point in the region of the flange task
License requirements: die_engineering ("DIE ENGINEERING")
.

setPointInRegion(Point) - Method in interface nxopen.die.FormTaskBuilder

Sets the point in region of the form task.

setPointInRegion(Point) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setPointInRegion(Point) - Method in interface nxopen.tooling.DieEngFormTaskBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setPointInRegion1(Point) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setPointListData(int, NXObject, TurnAvoidancePathPointsBuilder.MotionTypes, TurnAvoidancePathPointsBuilder.FeedrateModesTypes, double, TurnAvoidancePathPointsBuilder.CustomFeedrateUnitTypes) - Method in interface nxopen.cam.TurnAvoidancePathPointsBuilder

Create a new avoidance path point, name maybe changed if not unique
License requirements: cam_base ("CAM BASE")
.

setPointM(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPointMarker(PointMarker) - Method in interface nxopen.cae.xyplot.BaseSymbolStyleSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setPointMethod(OrientationPointMethodsBuilder.PointMethodTypes) - Method in interface nxopen.features.shipdesign.OrientationPointMethodsBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setPointMethod(StiffenerSystemBuilder.PointMethods) - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setPointMethod(WeldPointMethod) - Method in interface nxopen.weld.WeldPointBuilder

License requirements: ugweld ("UG WELD")
.

setPointMFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPointOfAxis(Tag, double[]) - Method in interface nxopen.uf.UFSo

Refer to UF_SO_set_point_of_axis for documentation.

setPointOfXform(Tag, double[]) - Method in interface nxopen.uf.UFSo

Refer to UF_SO_set_point_of_xform for documentation.

setPointOnConveyingSurface(Point) - Method in interface nxopen.linedesigner.SingleElementConveyorBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setPointOnCurve(double, String, DatumAxisBuilder.AlternateSolution, DatumAxisBuilder.CurveOption, ICurve) - Method in interface nxopen.features.DatumAxisBuilder

Sets curve or edge and arc length
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setPointOnCurve(double, String, DatumAxisBuilder.CurveOption, ICurve, DisplayableObject) - Method in interface nxopen.features.DatumAxisBuilder

Sets Curve or Edge object and arc length with an extra geometry in picture
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setPointOnCurve(double, String, DatumAxisBuilder.CurveOption, DisplayableObject, ICurve) - Method in interface nxopen.features.DatumAxisBuilder

Sets Curve or Edge object and arc length with an extra geometry in picture
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setPointOnCurve(double, String, DatumPlaneBuilder.AlternateSolution, DatumPlaneBuilder.CurveOption, ICurve) - Method in interface nxopen.features.DatumPlaneBuilder

Sets curve or edge and arc length
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setPointOnCurve(double, String, DatumPlaneBuilder.AlternateSolution, DatumPlaneBuilder.CurveOption, ICurve, Direction) - Method in interface nxopen.features.DatumPlaneBuilder

Sets curve or edge and arc length
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setPointOnCurve(double, String, DatumPlaneBuilder.CurveOption, ICurve, DisplayableObject) - Method in interface nxopen.features.DatumPlaneBuilder

Sets curve or edge object and arc length with other geometry selected.

setPointOnCurve(boolean) - Method in interface nxopen.InferredConstraintsBuilder

License requirements: None.

setPointOnCurve(Point) - Method in interface nxopen.mechatronics.CurveOnCurveJointBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setPointOnCurve(Point) - Method in interface nxopen.mechatronics.PathConstraintJointBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setPointOnCurve(Point) - Method in interface nxopen.mechatronics.PointOnCurveJointBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setPointOnCurve(boolean) - Method in interface nxopen.SketchAutoConstrainBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setPointOnCurveTParameterFixed(boolean) - Method in interface nxopen.Point

Sets the T parameter of the point created using point on curve method
License requirements: None.

setPointOnEdgeOption(WeldBuilder.PointOnEdgeType) - Method in interface nxopen.cae.WeldBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setPointOnFace(Point3d) - Method in interface nxopen.features.shipdesign.RollingLineBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setPointOnOffsetPlane(Point) - Method in interface nxopen.features.OffsetCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setPointOnPlane(Point3d) - Method in interface nxopen.assemblies.PlaneSearchTermBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setPointOnString(boolean) - Method in interface nxopen.InferredConstraintsBuilder

Deprecated.

Deprecated in NX11.0.0. Please use InferredConstraintsBuilder.preferStringConstraints() and InferredConstraintsBuilder.setPreferStringConstraints(boolean)

setPointOnSurfaceConstraint(Tag, UFMotion.PointOnSurfaceData) - Method in interface nxopen.uf.UFMotion

Refer to UF_MOTION_set_point_on_surface_constraint for documentation.

setPointOption(AssociativityPointOption) - Method in interface nxopen.annotations.Associativity

Sets the point option
License requirements: None.

setPointOption(WedmPointDefinitionBuilder.PointStates) - Method in interface nxopen.cam.WedmPointDefinitionBuilder

License requirements: cam_base ("CAM BASE")
.

setPointOrderEnum(InspectionLinkPmiBuilder.PointOrderTypes) - Method in interface nxopen.cam.InspectionLinkPmiBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setPointOrigin(Point) - Method in interface nxopen.mechatronics.PlanarJointBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setPointOrigin(Point) - Method in interface nxopen.mechatronics.ScrewJointBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setPointOverlay(boolean) - Method in interface nxopen.blockstyler.SectionBuilder

License requirements: None.

setPointOverlay(boolean) - Method in interface nxopen.blockstyler.SelectObject

License requirements: None.

setPointOverlay(boolean) - Method in interface nxopen.blockstyler.SuperPoint

License requirements: None.

setPointOverlay(boolean) - Method in interface nxopen.blockstyler.SuperSection

License requirements: None.

setPointPropertyValue(String, Point) - Method in interface nxopen.cae.PropertyTable

Sets the point value of the property
License requirements: None.

setPoints(Point[]) - Method in interface nxopen.cam.NcmPlanarEngRetBuilder

Sets engage/retract points
License requirements: cam_base ("CAM BASE")
.

setPoints(Point[]) - Method in interface nxopen.cam.NcmScEngRetBuilder

Sets engage/retract points
License requirements: cam_base ("CAM BASE")
.

setPoints(Point2d[]) - Method in interface nxopen.markup.Freehand

Sets a list of points
License requirements: None.

setPoints(Point2d[]) - Method in interface nxopen.markup.Polyline

Sets a list of points
License requirements: None.

setPointSelection(Point) - Method in interface nxopen.cae.CfdLocalResolutionConstraintBuilder

License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")
.

setPointSequenceChanged(boolean) - Method in interface nxopen.cam.InspectionUVGridBuilder

Flag indicating whether point sequence changed.

setPointSequenceDirection(InspectionMethodBuilder.PointSequenceDirectionTypes) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setPointSequenceDirection(InspectionMethodBuilder.PointSequenceDirectionTypes) - Method in interface nxopen.cam.InspectionUVGridBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setPointSequenceMode(InspectionMethodBuilder.PointSequenceModeTypes) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setPointSequenceMode(InspectionMethodBuilder.PointSequenceModeTypes) - Method in interface nxopen.cam.InspectionUVGridBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setPointSequenceStart(InspectionMethodBuilder.PointSequenceStartTypes) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setPointSequenceStart(InspectionMethodBuilder.PointSequenceStartTypes) - Method in interface nxopen.cam.InspectionUVGridBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setPointsGuideDistance(double) - Method in interface nxopen.weld.WeldPointBuilder

Sets the distance percentage from the start of the curve where the weld point should be. 0.0 is the start of the curve 100.0 is the end of the curve.

setPointsInSketch() - Method in interface nxopen.tooling.ReusePositioningObjectBuilder

Sets points in sketch
License requirements: None.

setPointSize(int) - Method in interface nxopen.display.PointCloudBuilder

License requirements: nx_point_cloud_view ("NX Point Cloud Viewer")
.

setPointSource(Point) - Method in interface nxopen.cae.NodeTranslateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setPointSpecify(Point) - Method in interface nxopen.tooling.UndersizeBuilder

License requirements: None.

setPointStart(Point) - Method in interface nxopen.cae.AttachElementsBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setPointStatus(NcmAvoidancePointBuilder.PointStates) - Method in interface nxopen.cam.NcmAvoidancePointBuilder

License requirements: cam_base ("CAM BASE")
.

setPointsValueList(double[]) - Method in interface nxopen.cae.responsesimulation.ResponseResultsEvaluationSettingBuilder

Sets the points value list
License requirements: nx_response_anlys ("NX Response Analysis")
.

setPointTarget(Point) - Method in interface nxopen.cae.NodeTranslateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setPointTo(Point) - Method in interface nxopen.tooling.LayoutRepositionBuilder

License requirements: None.

setPointToProjectToward(Point) - Method in interface nxopen.features.ProjectCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setPointType(EditSubopCommand.PointTypes) - Method in interface nxopen.cam.EditSubopCommand

License requirements: None.

setPointType(LaserPiercingPoint.Types) - Method in interface nxopen.cam.LaserPiercingPoint

License requirements: cam_base ("CAM BASE")
.

setPointTypeEnum(InspectionLinearMoveToPointBuilder.PointTypeEnums) - Method in interface nxopen.cam.InspectionLinearMoveToPointBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setPointTypeEnum(InspectionMeasurePointBuilder.PointTypes) - Method in interface nxopen.cam.InspectionMeasurePointBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setPointV1(Point) - Method in interface nxopen.features.vehicledesign.VisionPlaneBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPointV1(Point) - Method in interface nxopen.features.vehicledesign.WindshieldDatumBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPointV2(Point) - Method in interface nxopen.features.vehicledesign.VisionPlaneBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPointV2(Point) - Method in interface nxopen.features.vehicledesign.WindshieldDatumBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPointValue(double) - Method in interface nxopen.cae.responsesimulation.ResponseResultsEvaluationSettingBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setPointValue(String, Point3d) - Method in interface nxopen.cam.Cycle

Set the point of the parameter
License requirements: cam_base ("CAM BASE")
.

setPointX(double) - Method in interface nxopen.cam.InspectionEdgePointFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setPointX(double) - Method in interface nxopen.cam.InspectionLinearMoveToPointBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setPointX(double) - Method in interface nxopen.cam.InspectionPointFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setPointY(double) - Method in interface nxopen.cam.InspectionEdgePointFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setPointY(double) - Method in interface nxopen.cam.InspectionLinearMoveToPointBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setPointY(double) - Method in interface nxopen.cam.InspectionPointFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setPointZ(double) - Method in interface nxopen.cam.InspectionEdgePointFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setPointZ(double) - Method in interface nxopen.cam.InspectionLinearMoveToPointBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setPointZ(double) - Method in interface nxopen.cam.InspectionPointFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setPolarGridSize(WorkPlane.PolarGridSize) - Method in interface nxopen.preferences.WorkPlane

Set the polar grid size parameters.

setPolarShowMajorLines(boolean) - Method in interface nxopen.preferences.WorkPlane

Sets the show major lines flag for polar grid
License requirements: None.

setPoleDisplayColor(int) - Method in interface nxopen.preferences.SessionModeling

License requirements: None.

setPoleDisplayInheritColor(boolean) - Method in interface nxopen.preferences.SessionModeling

License requirements: None.

setPoleDisplayState(boolean) - Method in interface nxopen.DisplayModification

Sets the flag for pole display.

setPoleDisplayStyle(SessionModeling.PoleDisplayStyleType) - Method in interface nxopen.preferences.SessionModeling

License requirements: None.

setPoleEditColor(int) - Method in interface nxopen.preferences.SessionModeling

License requirements: None.

setPoleEditInheritColor(boolean) - Method in interface nxopen.preferences.SessionModeling

License requirements: None.

setPoleEditStyle(SessionModeling.PoleEditStyleType) - Method in interface nxopen.preferences.SessionModeling

License requirements: None.

setPoleEditType(NXObject, int, StudioXformBuilderEx.PoleEditType) - Method in interface nxopen.features.StudioXformBuilderEx

Update pole status of the selected BSpine curve
License requirements: studio_free_form ("STUDIO FREE FORM")
.

setPoleGroupEntity(int, Face) - Method in interface nxopen.geometricutilities.ControlPoleManagerData

Sets face to control poles group
License requirements: studio_free_form ("STUDIO FREE FORM")
.

setPoleGroupEntity(int, Curve) - Method in interface nxopen.geometricutilities.ControlPoleManagerData

Sets curve to control poles group
License requirements: studio_free_form ("STUDIO FREE FORM")
.

setPoleMoveDirectionEnum(MatchEdgeBuilder.PoleMoveDirection) - Method in interface nxopen.features.MatchEdgeBuilder

License requirements: features_modeling ("FEATURES MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setPoleMoveDirectionVector(Direction) - Method in interface nxopen.features.MatchEdgeBuilder

License requirements: features_modeling ("FEATURES MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setPoleMovementConstraintType(MatchEdgeBuilder.PoleMovementConstraintEnumType) - Method in interface nxopen.features.MatchEdgeBuilder

License requirements: features_modeling ("FEATURES MODELING")
.

setPoles(int, int[], Point[]) - Method in interface nxopen.geometricutilities.ControlPoleManagerData

Sets new group poles
License requirements: studio_free_form ("STUDIO FREE FORM")
.

setPolygonBodyResolutionOnFemBodies(PolygonGeometryManager.PolygonBodyResolutionType) - Method in interface nxopen.cae.PolygonGeometryManager

Sets the tesselation on polygon bodies that were created from CAD bodies.

setPolygonBodyResolutionWithRecreate(PolygonGeometryManager.PolygonBodyResolutionType, CAEBody[]) - Method in interface nxopen.cae.PolygonGeometryManager

Set Resolution for polygon body with recreate body only
License requirements: nx_masterfem ("Finite Element Modeling")
.

setPolygonBodyResolutionWithRecreateAndUpdate(PolygonGeometryManager.PolygonBodyResolutionType, CAEBody[]) - Method in interface nxopen.cae.PolygonGeometryManager

Set Resolution for polygon body with recreate body and update only
License requirements: nx_masterfem ("Finite Element Modeling")
.

setPolygonOrientationOption(PatternOrientation.Enum) - Method in interface nxopen.geometricutilities.PatternOrientation

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setPolygonSizeOption(PolygonPattern.SizeOptions) - Method in interface nxopen.geometricutilities.PolygonPattern

License requirements: None.

setPolylineDisplayColor(int) - Method in interface nxopen.preferences.SessionModeling

License requirements: None.

setPolylineDisplayInheritColor(boolean) - Method in interface nxopen.preferences.SessionModeling

License requirements: None.

setPolylineDisplayStyle(SessionModeling.PolylineStyleType) - Method in interface nxopen.preferences.SessionModeling

License requirements: None.

setPolylineEditColor(int) - Method in interface nxopen.preferences.SessionModeling

License requirements: None.

setPolylineEditInheritColor(boolean) - Method in interface nxopen.preferences.SessionModeling

License requirements: None.

setPolylineEditStyle(SessionModeling.PolylineStyleType) - Method in interface nxopen.preferences.SessionModeling

License requirements: None.

setPopupMenuEnabled(boolean) - Method in interface nxopen.blockstyler.BodyCollector

License requirements: None.

setPopupMenuEnabled(boolean) - Method in interface nxopen.blockstyler.CurveCollector

License requirements: None.

setPopupMenuEnabled(boolean) - Method in interface nxopen.blockstyler.FaceCollector

License requirements: None.

setPopupPoint(Point) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPort(ControlPort) - Method in interface nxopen.motion.InputPortAssociation

License requirements: mechanisms ("MECHANISMS")
.

setPortBackExtension(Tag, double) - Method in interface nxopen.uf.UFRoute

Refer to UF_ROUTE_set_port_back_extension for documentation.

setPortBackExtensionObj(Tag, Tag) - Method in interface nxopen.uf.UFRoute

Refer to UF_ROUTE_set_port_back_extension_obj for documentation.

setPortClockIncrement(Tag, double) - Method in interface nxopen.uf.UFRoute

Refer to UF_ROUTE_set_port_clock_increment for documentation.

setPortEngagement(Tag, double) - Method in interface nxopen.uf.UFRoute

Refer to UF_ROUTE_set_port_engagement for documentation.

setPortEngagementObj(Tag, Tag) - Method in interface nxopen.uf.UFRoute

Refer to UF_ROUTE_set_port_engagement_obj for documentation.

setPortExtension(Tag, double) - Method in interface nxopen.uf.UFRoute

Refer to UF_ROUTE_set_port_extension for documentation.

setPortExtensionObj(Tag, Tag) - Method in interface nxopen.uf.UFRoute

Refer to UF_ROUTE_set_port_extension_obj for documentation.

setPortId(Tag, String) - Method in interface nxopen.uf.UFRoute

Refer to UF_ROUTE_set_port_id for documentation.

setPortLockRotationFlag(Tag, boolean) - Method in interface nxopen.uf.UFRoute

Refer to UF_ROUTE_set_port_lock_rotation_flag for documentation.

setPortOfPlaceableObject(TaggedObject) - Method in interface nxopen.mechanicalrouting.PartPlacementBuilder

Sets the port for filtration from the part being placed.

setPortRotByPoint(double[], Tag) - Method in interface nxopen.uf.UFRoute

Refer to UF_ROUTE_set_port_rot_by_point for documentation.

setPorts(Port, Port) - Method in interface nxopen.routing.PortConnection

Sets the link between the two ports connected by the Port Connection object.

setPosition(Point3d, Matrix3x3) - Method in interface nxopen.assemblies.DesignElementBuilder

Sets the position of design element.

setPosition(FirstPlunge.Positions) - Method in interface nxopen.cam.FirstPlunge

License requirements: cam_base ("CAM BASE")
.

setPosition(Point3d) - Method in interface nxopen.features.HumanBuilder

Sets human position
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setPosition(MiterOptions.PositionOptions) - Method in interface nxopen.features.sheetmetal.MiterOptions

Sets the position of miter.

setPosition(Point3d) - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder

Sets the point information into the ShipCoordinate builder and a standard point will be created according to the position.

setPosition(DynamicCurbBuilder.PositionType) - Method in interface nxopen.features.vehicledesign.DynamicCurbBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPosition(GroundClearanceBuilder.PositionType) - Method in interface nxopen.features.vehicledesign.GroundClearanceBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPosition(ManikinBuilder.PositionType) - Method in interface nxopen.features.vehicledesign.ManikinBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPosition(OilPanBuilder.PositionType) - Method in interface nxopen.features.vehicledesign.OilPanBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPosition(SlopeBuilder.PositionType) - Method in interface nxopen.features.vehicledesign.SlopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPosition(StaticCurbBuilder.PositionType) - Method in interface nxopen.features.vehicledesign.StaticCurbBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPosition(WheelCoveringBuilder.PositionType) - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPosition(WheelFixingBuilder.PositionType) - Method in interface nxopen.features.vehicledesign.WheelFixingBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPosition(Point) - Method in interface nxopen.linedesigner.CreateFactoryElementBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setPosition(Point3d) - Method in interface nxopen.routing.IRoutePosition

Sets the current location of the object in ABS coordinates.

setPosition(DieCavityAndSlugHoleBuilder.InsertPositionItems) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setPosition(DieInsertBuilder.PositionItems) - Method in interface nxopen.tooling.DieInsertBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setPosition(PiercingInsertBuilder.InsertPosition) - Method in interface nxopen.tooling.PiercingInsertBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setPosition(PunchInsertBuilder.InsertPositionItems) - Method in interface nxopen.tooling.PunchInsertBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setPosition(UFVariant, double[]) - Method in interface nxopen.uf.UFDrpos

Refer to UF_DRPOS_set_position for documentation.

setPositionalValues(BoundaryTurnVariableStock.PositionType) - Method in interface nxopen.cam.BoundaryTurnVariableStock

License requirements: cam_base ("CAM BASE")
.

setPositionAsOption(PartPlacementBuilder.PositionAsType) - Method in interface nxopen.mechanicalrouting.PartPlacementBuilder

Sets the positioning option nxopen.MechanicalRouting.PartPlacementBuilder.PositionAsType on the builder.

setPositionColor(int) - Method in interface nxopen.preferences.SessionModeling

Sets the position color
License requirements: None.

setPositionDefinition(BaseDataWheelBuilder.PositionDefinitionOptions) - Method in interface nxopen.features.vehicledesign.BaseDataWheelBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPositionFromStart(double) - Method in interface nxopen.cam.BoundaryTurnVariableStockSet

License requirements: cam_base ("CAM BASE")
.

setPositioning(NcmctPartMountingBuilder.PositioningTypes) - Method in interface nxopen.cam.NcmctPartMountingBuilder

License requirements: cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setPositioning(boolean) - Method in interface nxopen.mechatronics.PhysicsJointBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setPositioningFeature(Sketch) - Method in interface nxopen.tooling.AddReusablePart

License requirements: None.

setPositioningFeature(Sketch) - Method in interface nxopen.tooling.FastenerAssy

License requirements: None.

setPositioningGroupName(String) - Method in interface nxopen.assemblies.PositioningGroupBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setPositioningIsolated(Arrangement) - Method in interface nxopen.assemblies.Component

Set positioning for the selected Component as isolated in the specified Arrangement .

setPositioningOptionValue(DesignElementBuilder.PositioningOption) - Method in interface nxopen.assemblies.DesignElementBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setPositioningTaskCollectionForDesignElements(SessionAssemblies.PositioningTaskCollectionOptionForDesignElements) - Method in interface nxopen.preferences.SessionAssemblies

Sets the option to specify where to add Design Elements selected whilst working in the Assembly Constraints Dialog.

setPositioningType(FlexBodyBuilder.Positioning) - Method in interface nxopen.motion.FlexBodyBuilder

License requirements: mechanisms ("MECHANISMS")
.

setPositioningVaried(Component[], boolean) - Method in interface nxopen.assemblies.Component

Set positioning for the selected Component s across all possible Arrangement s.

setPositionMethod(CloseRangeVisibilityBuilder.PositionMethods) - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPositionMethod(PendulumPlacementBuilder.PositionMethodType) - Method in interface nxopen.features.vehicledesign.PendulumPlacementBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPositionMethod(ECADImportBuilder.PositionMode) - Method in interface nxopen.mechatronics.ECADImportBuilder

Deprecated.

Deprecated in NX9.0.0. This method has no replacement. It is no longer supported.

setPositionMethod(SIZERImportBuilder.PositionMode) - Method in interface nxopen.tooling.SIZERImportBuilder

License requirements: None.

setPositionMode(AddReusablePart.PositionMethod) - Method in interface nxopen.tooling.AddReusablePart

License requirements: None.

setPositionPath(CloseRangeVisibilityBuilder.PositionPaths) - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPositionPoint(Point) - Method in interface nxopen.tooling.MoldFillingBuilder

License requirements: ug_mold_design ("UG MOLD")
.

setPositionPrecisionValue(double) - Method in interface nxopen.features.ToolingBoxBuilder

License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard") OR studio_free_form ("STUDIO FREE FORM") OR features_modeling ("FEATURES MODELING") OR solid_modeling ("SOLIDS MODELING")
.

setPositionTolerance(double) - Method in interface nxopen.features.AestheticFaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setPositionTolerance(double) - Method in interface nxopen.features.NSidedSurfaceBuilder

License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

setPositionTolerance(double) - Method in interface nxopen.features.RuledBuilder

License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

setPositionTolerance(double) - Method in interface nxopen.features.SectionSurfaceBuilder

Deprecated.

Deprecated in NX9.0.0. Use SectionSurfaceBuilderEx instead.

setPositionTolerance(double) - Method in interface nxopen.features.SilhouetteFlangeBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setPositionTolerance(double) - Method in interface nxopen.features.StudioSurfaceBuilder

License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

setPositionTolerance(double) - Method in interface nxopen.features.StyledBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setPositionTolerance(double) - Method in interface nxopen.features.ThroughCurveMeshBuilder

License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

setPositionTolerance(double) - Method in interface nxopen.features.ThroughCurvesBuilder

License requirements: features_modeling ("FEATURES MODELING") OR nx_freeform_1 ("basic freeform modeling")
.

setPositionTolerance(double) - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setPositiveDirection(OrdinatePositiveDirection) - Method in interface nxopen.annotations.OrdinateDimensionPreferences

Sets the positive direction
License requirements: None.

setPositiveDirection(OrdinatePositiveDirection) - Method in interface nxopen.annotations.OrdinateStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setPositiveFaceColor(int) - Method in interface nxopen.cae.modelcheck.ReverseShellElementNormalBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setPositiveFaceColor(int) - Method in interface nxopen.cae.modelcheck.SolidElementFaceNormalBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setPositiveFlushnessTolerance(double) - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setPositiveGapTolerance(double) - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setPositiveInnerTolerance(double) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setPositiveOuterTolerance(double) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setPositiveToleranceLabelDisplayed(boolean) - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setPossibleContextAttribute(int, String) - Method in interface nxopen.features.shipdesign.SteelFeatureSpreadsheetBuilder

Set a possible context attribute (assuming the context entity has not yet been created).

setPossibleContextAttributeCount(int) - Method in interface nxopen.features.shipdesign.SteelFeatureSpreadsheetBuilder

Set the possible context attribute count (assuming the context entity has not yet been created).

setPostEvent(boolean) - Method in interface nxopen.cam.PostEventsCiBuilder

License requirements: cam_base ("CAM BASE")
.

setPostFileBrowser(String) - Method in interface nxopen.linedesigner.CreateFenceBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setPostOffset(RailingFeatureBuilder.PostOffsetType) - Method in interface nxopen.linedesigner.RailingFeatureBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setPostprocessorName(String) - Method in interface nxopen.sim.postconfigurator.CreationPostBuilder

License requirements: nx_post_config_full ("NX Post Configurator") OR nx_post_config_adv ("NX Post Configurator")
.

setPostprocessorOutputDirectory(String) - Method in interface nxopen.sim.postconfigurator.CreationPostBuilder

License requirements: nx_post_config_full ("NX Post Configurator") OR nx_post_config_adv ("NX Post Configurator")
.

setPostToolPathExit(String) - Method in interface nxopen.cam.OperationBuilder

License requirements: cam_base ("CAM BASE")
.

setPostType(HandrailBuilder.PostTypes) - Method in interface nxopen.routing.HandrailBuilder

License requirements: routing_platform ("Routing Platform")
.

setPostureData(String, String) - Method in interface nxopen.features.HumanBuilder

Set posture data
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setPostview(int) - Method in interface nxopen.cae.FreeBodyResultsBuilder

The view where graphics will be displayed
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setPptMergeOption(SolverAppendOption.MergeOption) - Method in interface nxopen.cae.SolverAppendOption

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setPreciseGeom(boolean) - Method in interface nxopen.JtCreator

License requirements: None.

setPrecision(int) - Method in interface nxopen.annotations.TableCellStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setPrecisionType(PierceTaskBuilder.PrecisionTypes) - Method in interface nxopen.die.PierceTaskBuilder

Sets the precision type of the pierce task
License requirements: die_engineering ("DIE ENGINEERING")
.

setPrecisionValue(double) - Method in interface nxopen.features.ToolingBoxBuilder

License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard") OR studio_free_form ("STUDIO FREE FORM") OR features_modeling ("FEATURES MODELING") OR solid_modeling ("SOLIDS MODELING")
.

setPrecisionValue(double) - Method in interface nxopen.tooling.EjectorPostProcessingBuilder

License requirements: ug_mold_design ("UG MOLD")
.

setPredefinedHydraulicOption(DefineCamBuilder.PredefinedHydraulicOptions) - Method in interface nxopen.tooling.DefineCamBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setPredictionMethod(HumanPosturePredictionBuilder.PredictionMethodType) - Method in interface nxopen.HumanPosturePredictionBuilder

License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setPredrillPoints(Point[]) - Method in interface nxopen.cam.NcmPlanarBuilder

The pre-drill points
License requirements: cam_base ("CAM BASE")
.

setPredrillPointsOutput(NcmPlanarBuilder.PredrillPointsOutputOptions) - Method in interface nxopen.cam.NcmPlanarBuilder

License requirements: cam_base ("CAM BASE")
.

setPredrillPointsUseEffectDist(boolean) - Method in interface nxopen.cam.NcmPlanarBuilder

License requirements: cam_base ("CAM BASE")
.

setPreference(DuplicateElementsCheckBuilder.DeletePreference) - Method in interface nxopen.cae.modelcheck.DuplicateElementsCheckBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setPreference(DuplicateNodesCheckBuilder.MergePreference) - Method in interface nxopen.cae.modelcheck.DuplicateNodesCheckBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setPreferences(TitleBlockPreferences) - Method in interface nxopen.annotations.TitleBlock

Sets the preferences for the title block
License requirements: drafting ("DRAFTING")
.

setPreferences(Tag, UFClear.Pref) - Method in interface nxopen.uf.UFClear

Deprecated.

The equivalent Open C method has retired

setPreferences(int[], double[], String, String) - Method in interface nxopen.uf.UFDrf

Refer to UF_DRF_set_preferences for documentation.

setPreferences(Tag, int[], double, String, String, String, String, String, String, double, int, int) - Method in interface nxopen.uf.UFSket

Refer to UF_SKET_set_preferences for documentation.

setPreferredFillerStock(CharacteristicList, CharacteristicList) - Method in interface nxopen.preferences.RoutingStock

Sets the preferred stock for creating filler stock
License requirements: routing_base ("Routing Basic")
.

setPreferredOverstock(CharacteristicList, CharacteristicList) - Method in interface nxopen.preferences.RoutingStock

Sets the preferred stock for creating overstock
License requirements: routing_base ("Routing Basic")
.

setPreferredPortAttribute(String, String) - Method in interface nxopen.preferences.RoutingPart

Sets the method for determining the preferred port to RoutingPart.PreferredPortMethod.ATTRIBUTE and sets the desired port attribute and it's value.

setPreferredPortName(String) - Method in interface nxopen.preferences.RoutingPart

Sets the method for determining the preferred port to RoutingPart.PreferredPortMethod.NAME and sets the desired port name.

setPreferredSpaceReservation(CharacteristicList, CharacteristicList) - Method in interface nxopen.preferences.RoutingStock

Sets the preferred stock for creating space Reservation
License requirements: routing_base ("Routing Basic")
.

setPreferredTiltAngle(double) - Method in interface nxopen.cam.ToolPathTiltAvoidance

License requirements: None.

setPreferredTiltAngle(double) - Method in interface nxopen.cam.ToolPathTiltBuilder

Deprecated.

Deprecated in NX9.0.0. Use ToolPathTiltAvoidance.preferredTiltAngle() instead.

setPreferStringConstraints(boolean) - Method in interface nxopen.InferredConstraintsBuilder

License requirements: None.

setPrefix(String) - Method in interface nxopen.annotations.TableCellStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setPrefix(String) - Method in interface nxopen.drawings.ViewSettingsBuilder

License requirements: convert_to_pmi (" Convert To PMI"), drafting ("DRAFTING")
.

setPrefix(String) - Method in interface nxopen.routing.BranchPathNumberingBuilder

License requirements: routing_hvac ("Routing HVAC")
.

setPrefixCharacterHeightFactor(double) - Method in interface nxopen.drawings.ViewDetailLabelBuilder

License requirements: drafting ("DRAFTING")
.

setPrefixCharacterHeightFactor(double) - Method in interface nxopen.drawings.ViewLabelBuilder

License requirements: drafting ("DRAFTING")
.

setPrefixCharacterHeightFactor(double) - Method in interface nxopen.drawings.ViewSectionLabelBuilder

License requirements: drafting ("DRAFTING")
.

setPrefixOrSuffixString(String) - Method in interface nxopen.tooling.RenameAndExportComponentBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setPrefixStr(String) - Method in interface nxopen.pdm.PartOperationImportBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setPrefixSuffixReference(boolean) - Method in interface nxopen.annotations.DimensionPreferences

Sets the flag indicating whether prefix suffix reference toggle is turned on or not
License requirements: None.

setPrefixSuffixReference(boolean) - Method in interface nxopen.annotations.DimensionStyleBuilder

Sets the flag indicating whether prefix suffix reference toggle is turned on or not
License requirements: None.

setPrefs(Tag, UFPlist.Prefs) - Method in interface nxopen.uf.UFPlist

Refer to UF_PLIST_set_prefs for documentation.

setPreGroup(boolean) - Method in interface nxopen.cae.ImportedSolutionBuilder

The pre processing group
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setPreliminaryBuild(boolean) - Method in interface nxopen.die.DrawDiePunchBuilder

Sets the preliminary build switch of the draw die punch casting, if true the fast build options will be used, if false accurate build options will be used.

setPreload(boolean) - Method in interface nxopen.motion.JointFrictionAdams

Sets the preload
License requirements: mechanisms ("MECHANISMS")
.

setPreload(boolean) - Method in interface nxopen.motion.JointFrictionRecurDyn

Sets the preload
License requirements: mechanisms ("MECHANISMS")
.

setPrepareEdges(WeldPrepareEdges) - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. Use WeldGrooveBuilder.prepareEdges() and WeldGrooveBuilder.setPrepareEdges(nxopen.weld.WeldGrooveBuilder.Prepare) instead.

setPrepareEdges(WeldGrooveBuilder.Prepare) - Method in interface nxopen.weld.WeldGrooveBuilder

License requirements: ugweld ("UG WELD")
.

setPrependString(String) - Method in interface nxopen.cae.ImportSimulationBuilder

Set prepend string
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setPreselectionColor(int) - Method in interface nxopen.preferences.PartVisualizationColorSetting

Sets the preselection color.

setPreSelectionTimeOut(double) - Method in interface nxopen.blockstyler.Tree

Sets the pre selection time out.

setPresentationName(String) - Method in interface nxopen.drawings.MarkAsTemplateBuilder

License requirements: drafting ("DRAFTING")
.

setPresentationStyleAsString(String) - Method in interface nxopen.blockstyler.DoubleBlock

License requirements: None.

setPresentationStyleAsString(String) - Method in interface nxopen.blockstyler.Enumeration

License requirements: None.

setPresentationStyleAsString(String) - Method in interface nxopen.blockstyler.IntegerBlock

License requirements: None.

setPresentationStyleAsString(String) - Method in interface nxopen.blockstyler.StringBlock

License requirements: None.

setPreserveChangeSymbolDisplay(boolean) - Method in interface nxopen.drawings.TrackDrawingChangesGeneralBuilder

License requirements: drafting ("DRAFTING")
.

setPreserveDraftingLayer(boolean) - Method in interface nxopen.drawings.AnnotationSettingsBuilder

License requirements: convert_to_pmi (" Convert To PMI"), drafting ("DRAFTING")
.

setPreserveFieldOfViewAngleForFit(boolean) - Method in interface nxopen.preferences.SessionVisualizationScreen

Sets whether for a perspective view the Fit operation should not change the field of view angle from the camera position to the view bounds
License requirements: None.

setPreserveFolderStructure(boolean) - Method in interface nxopen.annotations.ImportAutocadBlockBuilder

License requirements: nx_layout ("NX Layout")
.

setPreserveFolderStructure(boolean) - Method in interface nxopen.annotations.ImportSymbolBuilder

License requirements: nx_layout ("NX Layout")
.

setPreserveGuideShapeOption(boolean) - Method in interface nxopen.features.SweptBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setPreserveHiddenStatus(boolean) - Method in interface nxopen.drawings.AnnotationSettingsBuilder

License requirements: convert_to_pmi (" Convert To PMI"), drafting ("DRAFTING")
.

setPreserveNominalGeometry(boolean) - Method in interface nxopen.preferences.SessionNXGateway

Sets the preserve nominal geometry flag.

setPreserveShape(boolean) - Method in interface nxopen.features.ThroughCurvesBuilder

License requirements: features_modeling ("FEATURES MODELING") OR nx_freeform_1 ("basic freeform modeling")
.

setPreserveShapeOption(boolean) - Method in interface nxopen.features.SweptBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setPressDirection(Vector3d) - Method in interface nxopen.die.LineupBuilder

Sets the press direction of the lineup
License requirements: die_engineering ("DIE ENGINEERING")
.

setPressDirection(IReferenceAxis) - Method in interface nxopen.die.RotorBuilder

Sets the press direction of the rotor casting.

SetPressModelBuilder - Interface in nxopen.tooling

Represents a Tooling.SetPressModelBuilder to set and load the press model.

setPressModelName(String) - Method in interface nxopen.tooling.SetPressModelBuilder

Sets the press model name user selected in the list box
License requirements: nx_dievalidation ("DIE VALIDATION")
.

setPressModelPath(String) - Method in interface nxopen.tooling.SetPressModelBuilder

License requirements: nx_dievalidation ("DIE VALIDATION")
.

setPressStartAngle(double) - Method in interface nxopen.tooling.DefineCamBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setPressStartAngle(double) - Method in interface nxopen.tooling.UserDefinedMotionBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setPressStopAngle(double) - Method in interface nxopen.tooling.DefineCamBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setPressStopAngle(double) - Method in interface nxopen.tooling.UserDefinedMotionBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setPressure(double) - Method in interface nxopen.bodydes.OnestepUnformBuilder

License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setPreventUndercutting(boolean) - Method in interface nxopen.cam.MillCutParameters

Deprecated.

Deprecated in NX8.0.0. Use MillCutParameters.allowUndercutting() and MillCutParameters.setAllowUndercutting(boolean) instead.

setPreview(boolean) - Method in interface nxopen.mechanicalrouting.MovePathBuilder

License requirements: routing_base ("Routing Basic")
.

setPreviewComponentOnAdd(boolean) - Method in interface nxopen.preferences.SessionAssemblies

Sets the preview component on add option
License requirements: None.

setPreviewEnabled(boolean) - Method in interface nxopen.cam.DPMItpBuilder

License requirements: cam_base ("CAM BASE")
.

setPreviewFalseBody(boolean) - Method in interface nxopen.tooling.PocketBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setPreviewImage(IssueAttachment) - Method in interface nxopen.issue.IssueContent

License requirements: nx_issue_mgmt ("NX Issue Tracking")
.

setPreviewImage(IssueAttachment) - Method in interface nxopen.issue.IssueContentBuilder

Sets preview image
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.

setPreviewImageFile(String) - Method in interface nxopen.tooling.ReusableObject

License requirements: None.

setPreviewObject(IdSymbol) - Method in interface nxopen.annotations.IdSymbolBuilder

Deprecated.

Deprecated in NX6.0.0. This functionality is no longer supported.

setPreviewOption(boolean) - Method in interface nxopen.cae.responsesimulation.DynamicEvaluationOutputSettings

License requirements: nx_response_anlys ("NX Response Analysis")
.

setPreviewOption(boolean) - Method in interface nxopen.features.shipdesign.PlateSystemBuilder

Sets the preview option.

setPreviewOption(boolean) - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setPreviewResolution(SessionModeling.PreviewResolutionType) - Method in interface nxopen.preferences.SessionModeling

Sets the preview resolution setting.

setPreviewStyle(ViewWorkflowBuilder.Style) - Method in interface nxopen.drawings.ViewWorkflowBuilder

License requirements: drafting ("DRAFTING")
.

setPreviewToggle(boolean) - Method in interface nxopen.display.IrayPlusMaterialEditorBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setPreviewToggle(boolean) - Method in interface nxopen.routing.ModelTerminalsBuilder

License requirements: routing_harness ("Routing Harness")
.

setPreviousWorkPart(Part) - Method in interface nxopen.tooling.BackingPadBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setPreviousWorkPart(Part) - Method in interface nxopen.tooling.SlugRetentionBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setPriDatLetter(String) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setPriDirection(InspectionAlignmentBuilder.AlignmentDirections) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setPrimary(PlateSystemBuilder.StiffenerDirectionType) - Method in interface nxopen.features.shipdesign.PlateSystemBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setPrimary(GanttOperationObject) - Method in interface nxopen.mechatronics.GanttLinkerBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setPrimaryArrangement(Arrangement) - Method in interface nxopen.positioning.ComponentPositioner

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setPrimaryDatumDualMCMType(SearchCriteriaFeatureControlFrameBuilder.PrimaryDatumDualMCMOptions) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

Deprecated.

Deprecated in NX10.0.0. Use Annotations.SearchCriteriaFeatureControlFrameBuilder#datumMCMType and Annotations.SearchCriteriaFeatureControlFrameBuilder#setDatumMCMType instead.

setPrimaryDatumDualText(String) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

Deprecated.

Deprecated in NX10.0.0. Use Annotations.SearchCriteriaFeatureControlFrameBuilder#datumText and Annotations.SearchCriteriaFeatureControlFrameBuilder#setDatumText instead.

setPrimaryDatumExtendedText(String) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setPrimaryDatumMCMType(SearchCriteriaFeatureControlFrameBuilder.PrimaryDatumMCMOptions) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

Deprecated.

Deprecated in NX10.0.0. Use Annotations.SearchCriteriaFeatureControlFrameBuilder#datumMCMType and Annotations.SearchCriteriaFeatureControlFrameBuilder#setDatumMCMType instead.

setPrimaryDatumReference(DatumReference) - Method in interface nxopen.annotations.FcfFrame

Deprecated.

Deprecated in NX10.0.0. Use FeatureControlFrameDataBuilder.primaryDatumReference() instead.

setPrimaryDatumText(String) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

Deprecated.

Deprecated in NX10.0.0. Use Annotations.SearchCriteriaFeatureControlFrameBuilder#datumText and Annotations.SearchCriteriaFeatureControlFrameBuilder#setDatumText instead.

setPrimaryDegree(int) - Method in interface nxopen.SurfaceRebuildData

License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

setPrimaryDimensionDecimalPlaces(int) - Method in interface nxopen.annotations.LinearTolerance

Sets the number of decimal places for primary dimension
License requirements: None.

setPrimaryDimensionFractionDenominator(FractionDenominatorFormat) - Method in interface nxopen.annotations.DimensionPreferences

Sets the primary dimension and tolerance fraction denominator
License requirements: None.

setPrimaryDimensionFractionDenominator(FractionDenominatorFormat) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setPrimaryDimensionTextFormat(DimensionTextFormat) - Method in interface nxopen.annotations.UnitsFormatPreferences

Sets the primary dimension text format
License requirements: None.

setPrimaryDimensionUnit(DimensionUnit) - Method in interface nxopen.annotations.UnitsFormatPreferences

Sets the primary dimension unit
License requirements: None.

setPrimaryDirection(InspectionAlignmentAssistantBuilder.Direction) - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setPrimaryMaxDegree(int) - Method in interface nxopen.SurfaceRebuildData

License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

setPrimaryMaxSegments(int) - Method in interface nxopen.SurfaceRebuildData

License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

setPrimaryOffsetGeometry(NXObject) - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setPrimaryOnReference(PlateSystemBuilder.StiffenerDirectionType) - Method in interface nxopen.features.shipdesign.PlateSystemBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setPrimaryParamFile(String) - Method in interface nxopen.motion.TirePropertyCdBuilder

License requirements: mechanisms ("MECHANISMS")
.

setPrimaryRebuildType(SurfaceRebuildData.Type) - Method in interface nxopen.SurfaceRebuildData

License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

setPrimarySolutionsFlag(boolean) - Method in interface nxopen.mechanicalrouting.PartPlacementBuilder

Sets the primary solutions flag on builder.

setPrimaryState(InspectionAlignmentAssistantBuilder.State) - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setPrimaryThicknessUser(double) - Method in interface nxopen.weld.EdgePrepValuesBuilder

License requirements: structure_weld ("STRUCTURE WELD")
.

setPrimaryType(InspectionAlignmentAssistantBuilder.FeatureType) - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setPrimaryVector(Direction) - Method in interface nxopen.cae.LaminateDrapingDataBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setPrimePoint(Point) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPrincipalAxes(boolean) - Method in interface nxopen.features.SectionInertiaAnalysisBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setPrincipalAxisStability(boolean) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setPrincipalAxisStability(boolean) - Method in interface nxopen.cae.DurabilityResultsReportBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setPrincipalAxisX(boolean) - Method in interface nxopen.weld.DatumCommonBuilder

License requirements: ugweld ("UG WELD")
.

setPrincipalAxisY(boolean) - Method in interface nxopen.weld.DatumCommonBuilder

License requirements: ugweld ("UG WELD")
.

setPrincipalAxisZ(boolean) - Method in interface nxopen.weld.DatumCommonBuilder

License requirements: ugweld ("UG WELD")
.

setPrincipalMovementDirection(StudioXformBuilderEx.PrincipalMovementDirectionType) - Method in interface nxopen.features.StudioXformBuilderEx

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setPrincipalRotatingAxis(StudioXformBuilderEx.PrincipalRotatingAxisType) - Method in interface nxopen.features.StudioXformBuilderEx

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setPrincipalScalingDirection(StudioXformBuilderEx.PrincipalScalingDirectionType) - Method in interface nxopen.features.StudioXformBuilderEx

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setPrint(ProbeControlParametersBuilder.PrintType) - Method in interface nxopen.cam.ProbeControlParametersBuilder

License requirements: None.

setPrinterGroup(String, String, String) - Method in interface nxopen.uf.UFPlot

Refer to UF_PLOT_set_printer_group for documentation.

setPrinterGroupText(String) - Method in interface nxopen.PlotBuilder

License requirements: None.

setPrinterText(String) - Method in interface nxopen.Print3dBuilder

License requirements: None.

setPrinterText(String) - Method in interface nxopen.PrintBuilder

License requirements: None.

setPrintOutput(boolean) - Method in interface nxopen.cae.FreeBodyResultsBuilder

Print Output
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setPrintoutTags(SimDebugBuilder.PrintoutTagsOrPointersType) - Method in interface nxopen.sim.SimDebugBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setPrintReport(boolean) - Method in interface nxopen.sim.ExportMachineKitBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setPrintReport(boolean) - Method in interface nxopen.sim.ImportMachineKitBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setPriority(int) - Method in interface nxopen.drawings.DrawingRegionBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setPriority(String) - Method in interface nxopen.issue.IssueContent

License requirements: nx_issue_mgmt ("NX Issue Tracking")
.

setPriority(String) - Method in interface nxopen.issue.IssueContentBuilder

License requirements: nx_issue_mgmt ("NX Issue Tracking")
.

setPriorityLevel(CfdAutoRefinementConstraintBuilder.Priority) - Method in interface nxopen.cae.CfdAutoRefinementConstraintBuilder

License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")
.

setPriorityLevel(CfdContactPreventionConstraintBuilder.Priority) - Method in interface nxopen.cae.CfdContactPreventionConstraintBuilder

License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")
.

setPriorityLevel(CfdLocalResolutionConstraintBuilder.Priority) - Method in interface nxopen.cae.CfdLocalResolutionConstraintBuilder

License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")
.

setPriXorigin(boolean) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setPriYorigin(boolean) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setPriZorigin(boolean) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setProbabilityOfFailure(double) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setProbabilityOption(DurabilityEventFatigueSettingsBuilder.ProbabilityOptionEnum) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setProbeAngles() - Method in interface nxopen.cam.InspectionMoveBuilder

Set default values for probe angles based on feature type.

setProbeName(String) - Method in interface nxopen.cae.ResultProbeBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setProbeRotationsAtSafePlane(boolean) - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setProbeTip() - Method in interface nxopen.cam.InspectionMoveBuilder

Set default probe tip based on preferred tip type and probe angles.

setProbeTipType(InspectionMoveBuilder.ProbeTipTypes) - Method in interface nxopen.cam.InspectionCreatePathsBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setProbeTipType(InspectionMoveBuilder.ProbeTipTypes) - Method in interface nxopen.cam.InspectionLinkPmiBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setProbeTipType(InspectionMoveBuilder.ProbeTipTypes) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setProbeTipType(InspectionMoveBuilder.ProbeTipTypes) - Method in interface nxopen.cam.InspectionMoveBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setProcess(ColorFeatureGroupBuilder.ProcessType) - Method in interface nxopen.features.ColorFeatureGroupBuilder

License requirements: None.

setProcessActiveHood(boolean) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setProcessBinder(double) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setProcessBinderOption(boolean) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setProcessBinderType(LsdynaGeometryPreparationBuilder.ProcessActionBinder) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setProcessCoplanar(boolean) - Method in interface nxopen.features.shipdesign.CuttingSideFacesBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setProcessDie(double) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setProcessDieOption(boolean) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setProcessDieType(LsdynaGeometryPreparationBuilder.ProcessActionDie) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setProcessFive(double) - Method in interface nxopen.tooling.ScrapDesignBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setProcessForce(String) - Method in interface nxopen.tooling.ForceCalculationBuilder

License requirements: None.

setProcessFour(double) - Method in interface nxopen.tooling.ScrapDesignBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setProcessHoldFlag(boolean) - Method in interface nxopen.DexBuilder

License requirements: None.

setProcessingOrder(DxfdwgImporter.ProcessingOrderAs) - Method in interface nxopen.DxfdwgImporter

License requirements: None.

setProcessName(String) - Method in interface nxopen.tooling.ForceCalculationBuilder

License requirements: None.

setProcessObjectsHidden(boolean) - Method in interface nxopen.drawings.AnnotationSettingsBuilder

License requirements: convert_to_pmi (" Convert To PMI"), drafting ("DRAFTING")
.

setProcessOne(double) - Method in interface nxopen.tooling.ScrapDesignBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setProcessPrimaryHiddenBySecondary(boolean) - Method in interface nxopen.drawings.ViewStyleSecondaryComponentsBuilder

License requirements: drafting ("DRAFTING")
.

setProcessPunch(double) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setProcessPunchOption(boolean) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setProcessPunchType(LsdynaGeometryPreparationBuilder.ProcessActionPunch) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setProcessSecondaryComponents(boolean) - Method in interface nxopen.drawings.ViewStyleSecondaryComponentsBuilder

License requirements: drafting ("DRAFTING")
.

setProcessSecondaryHiddenByPrimary(boolean) - Method in interface nxopen.drawings.ViewStyleSecondaryComponentsBuilder

License requirements: drafting ("DRAFTING")
.

setProcessSketchCurves(boolean) - Method in interface nxopen.drawings.ViewCopyTo3dBuilder

Deprecated.

Deprecated in NX8.0.0. This method is no longer relevant and calls to this can be safely removed.

setProcessTangent(boolean) - Method in interface nxopen.features.shipdesign.CuttingSideFacesBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setProcessThree(double) - Method in interface nxopen.tooling.ScrapDesignBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setProcessTime(double) - Method in interface nxopen.linedesigner.ConveyorStationFeatureBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setProcessTwo(double) - Method in interface nxopen.tooling.ScrapDesignBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setProcessType(OnestepUnformBuilder.Process) - Method in interface nxopen.bodydes.OnestepUnformBuilder

License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setProcessType(LaserControlPoint.ProcessTypes) - Method in interface nxopen.cam.LaserControlPoint

License requirements: cam_base ("CAM BASE")
.

setProcessType(ForceCalculationBuilder.ProcessTypes) - Method in interface nxopen.tooling.ForceCalculationBuilder

License requirements: None.

setProcessTypeOption(LsdynaGeometryPreparationBuilder.ProcessType) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setProcessViewCurves(boolean) - Method in interface nxopen.drawings.ViewCopyTo3dBuilder

Deprecated.

Deprecated in NX8.0.0. This method is no longer relevant and calls to this can be safely removed.

setProductBodies(Body[]) - Method in interface nxopen.die.LineupBuilder

Sets the product sheet bodies of the lineup
License requirements: die_engineering ("DIE ENGINEERING")
.

setProductContactRelief(String) - Method in interface nxopen.die.SteelInsertSectionBuilder

License requirements: ug_die_design ("Die Design")
.

setProductContactWidth(String) - Method in interface nxopen.die.SteelInsertSectionBuilder

License requirements: ug_die_design ("Die Design")
.

setProductCSYS(CoordinateSystem) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setProductData(boolean) - Method in interface nxopen.ObjectTypeSelector

License requirements: None.

setProductDefinitionData(Tag, UFPd.ProductDefinition) - Method in interface nxopen.uf.UFPd

Refer to UF_PD_set_product_definition_data for documentation.

setProductInterfaceEmphasis(boolean) - Method in interface nxopen.preferences.SessionVisualizationEmphasis

Sets the setting that controls whether or not Product Interface objects are emphasized.

setProductInterfaceEmphasize(boolean) - Method in interface nxopen.preferences.SessionAssemblies

Deprecated.

Deprecated in NX8.5.0. Use Preferences.SessionVisualizationEmphasis#setProductInterfaceEmphasis instead.

setProductInterfaceObjects(InterfaceObject[]) - Method in interface nxopen.features.CompositeCurveBuilder

Sets selected product interface objects
License requirements: None.

setProductInterfaceObjects(InterfaceObject[]) - Method in interface nxopen.features.ExtractFaceBuilder

Sets selected product interface objects
License requirements: None.

setProductInterfaceObjects(InterfaceObject[]) - Method in interface nxopen.features.MirrorBodyBuilder

Sets selected product interface objects
License requirements: None.

setProductInterfaceObjects(InterfaceObject[]) - Method in interface nxopen.features.WaveDatumBuilder

Sets selected product interface objects
License requirements: None.

setProductInterfaceObjects(InterfaceObject[]) - Method in interface nxopen.features.WavePointBuilder

Sets selected product interface objects
License requirements: None.

setProductInterfaceObjects(InterfaceObject[]) - Method in interface nxopen.features.WaveSketchBuilder

Sets selected product interface objects
License requirements: None.

setProductInterfaces(boolean) - Method in interface nxopen.pdm.PartOperationImportBuilder

Deprecated.

Deprecated in NX10.0.2. It is no longer supported.

setProductionProcessText(String) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder

License requirements: None.

setProductionProcessType(SearchModelViewBuilder.TextComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder

License requirements: None.

setProductionUnitDescription(String[]) - Method in interface nxopen.linedesigner.ProductionUnitCreatorBuilder

Sets the production unit description
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setProductionUnitId(String) - Method in interface nxopen.linedesigner.ProductionUnitCreatorBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setProductionUnitName(String) - Method in interface nxopen.linedesigner.ProductionUnitCreatorBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setProductionUnitParent(Partition) - Method in interface nxopen.linedesigner.ProductionUnitCreatorBuilder

Sets the production unit parent
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setProductionUnitTypeString(String) - Method in interface nxopen.linedesigner.ProductionUnitCreatorBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setProductPoints(Point3d[]) - Method in interface nxopen.die.SpringbackCompensationBuilder

Set the sample points on the product surface.

setProductPointsFile(String) - Method in interface nxopen.die.SpringbackCompensationBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR nx_freeform_2 ("advanced freeform modeling")
.

setProfile(DirectionOption, IProfile[]) - Method in interface nxopen.die.ConnectProfileParentBuilder

Sets the connecting profiles of the steel insert
License requirements: ug_die_design ("Die Design")
.

setProfileBlendRadius(String) - Method in interface nxopen.die.PierceHoleChildBuilder

License requirements: ug_die_design ("Die Design")
.

setProfileBlendRadius(String) - Method in interface nxopen.die.PierceHoleParentBuilder

License requirements: ug_die_design ("Die Design")
.

setProfileCutRegions(CutParametersProfileCutRegionsTypes) - Method in interface nxopen.cam.TurnCutParameters

License requirements: cam_base ("CAM BASE")
.

setProfileDisposition(InspectionMethodBuilder.ProfileDispositionTypes) - Method in interface nxopen.cam.InspectionAnalyzeBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setProfileDispositionMode(InspectionMethodBuilder.ProfileDispositionTypes) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setProfileEnd(ProfileFrom) - Method in interface nxopen.routing.Stock

Sets the end that defines profile.

setProfileName(String) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setProfilePass(boolean) - Method in interface nxopen.cam.DmAmBuilder

License requirements: None.

setProfilePointAlignment(int, int[], double[]) - Method in interface nxopen.features.MeshSurfaceBuilder

Set profile string alignment info.

setProfilePointFile(String) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setProfileRelief(String) - Method in interface nxopen.die.SteelInsertSectionBuilder

License requirements: ug_die_design ("Die Design")
.

setProfileRelief(String) - Method in interface nxopen.die.SteelInsertSegmentChildBuilder

License requirements: ug_die_design ("Die Design")
.

setProfileRelief(String) - Method in interface nxopen.die.SteelInsertSegmentParentBuilder

License requirements: ug_die_design ("Die Design")
.

setProfileReliefToggle(int) - Method in interface nxopen.die.SteelInsertBuilder

Sets the profile relief toggle
License requirements: ug_die_design ("Die Design")
.

setProfileReliefToggle(boolean) - Method in interface nxopen.die.SteelInsertSegmentChildBuilder

Sets the profile relief toggle
License requirements: ug_die_design ("Die Design")
.

setProfileReliefToggle(boolean) - Method in interface nxopen.die.SteelInsertSegmentParentBuilder

Sets the profile relief
License requirements: ug_die_design ("Die Design")
.

setProfilesDirection(boolean) - Method in interface nxopen.tooling.DieDesignTrimPostBuilder

License requirements: ug_die_design ("Die Design")
.

setProfileSection(Section) - Method in interface nxopen.cam.LaserProfileMove

License requirements: cam_base ("CAM BASE")
.

setProfileSize(int) - Method in interface nxopen.features.shipdesign.ProfileBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setProfileSplineLayer(int) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setProfileText(String) - Method in interface nxopen.PlotBuilder

License requirements: None.

setProfileTolData(Tag, UFGdt.ProfileType, UFGdt.ToleranceValue) - Method in interface nxopen.uf.UFGdt

Refer to UF_GDT_set_profile_tol_data for documentation.

setProfileType(int) - Method in interface nxopen.features.shipdesign.ProfileBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setProgramDefinedCsys(NXObject) - Method in interface nxopen.geometricutilities.OrientXpressBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setProgramFile(String) - Method in interface nxopen.report.ProgramInformation

License requirements: None.

setProgramGroup(InspectionGroup) - Method in interface nxopen.cam.InspectionCreatePathsBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setProgramGroup(NCGroup) - Method in interface nxopen.cam.MirrorBuilder

License requirements: cam_base ("CAM BASE")
.

setProgramLocationString(String) - Method in interface nxopen.cam.InspectionCreatePathsBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setProgramLocationString(String) - Method in interface nxopen.cam.InspectionLinkPmiBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setProgramName(String) - Method in interface nxopen.cam.InspectionCmmCommandBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setProgramName(String) - Method in interface nxopen.uf.UFMisc

Refer to UF_MISC_set_program_name for documentation.

setProgramNameMethod(InspectionCmmCommandBuilder.ProgramNameMethods) - Method in interface nxopen.cam.InspectionCmmCommandBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setProgramToggle(boolean) - Method in interface nxopen.cam.InspectionCmmCommandBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setProgressionSubtype(MeshControlBuilder.ProgressionTypes) - Method in interface nxopen.cae.MeshControlBuilder

Sets the progression or bias starting type
License requirements: nx_masterfem ("Finite Element Modeling")
.

setProgStatements(String[]) - Method in interface nxopen.cam.InspectionCmmCommandBuilder

Sets the program statements
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setProject(String) - Method in interface nxopen.pdm.SessionSettings

License requirements: None.

setProjectAlongDirection(boolean) - Method in interface nxopen.weld.DatumCommonBuilder

License requirements: ugweld ("UG WELD")
.

setProjectAsDumbFixedCurves(boolean) - Method in interface nxopen.SketchProjectBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setProjectCurvesThatLieOnFaceOption(boolean) - Method in interface nxopen.features.DividefaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setProjectDirection(Vector3d) - Method in interface nxopen.cae.QueryCurveUsageOptions

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setProjectDirection(Direction) - Method in interface nxopen.features.RapidSurfaceBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setProjectDirection(Vector3d) - Method in interface nxopen.weld.WeldPointBuilder

Sets the project direction
License requirements: ugweld ("UG WELD")
.

setProjectDirectionMethod(ProjectionOptions.DirectionType) - Method in interface nxopen.geometricutilities.ProjectionOptions

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setProjectDirectionObject(Direction) - Method in interface nxopen.weld.WeldPointBuilder

Sets the project direction NXOpen object
License requirements: ugweld ("UG WELD")
.

setProjected(boolean) - Method in interface nxopen.annotations.DatumReferenceBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setProjected(boolean) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setProjectedType(SearchCriteriaFeatureControlFrameBuilder.ProjectedOptions) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

License requirements: None.

setProjectedValue(String) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setProjectedValue(double) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

License requirements: None.

setProjectedValueType(SearchModelViewBuilder.ValueComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

License requirements: None.

setProjection(EmbossProjection) - Method in interface nxopen.features.EmbossRegion

Sets the emboss projection object
License requirements: solid_modeling ("SOLIDS MODELING")
.

setProjection(CurveCurvatureAnalysisBuilder.ProjectionTypes) - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder

License requirements: None.

setProjection(CompDrawingBuilder.ProjectionType) - Method in interface nxopen.tooling.CompDrawingBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setProjectionAngle(DrawingSheetBuilder.SheetProjectionAngle) - Method in interface nxopen.drawings.DrawingSheetBuilder

License requirements: drafting ("DRAFTING")
.

setProjectionDirection(Direction) - Method in interface nxopen.features.FitCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setProjectionDirection(Direction) - Method in interface nxopen.features.GlobalShapingBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setProjectionDirectionMethod(EdgeFaceImprintBuilder.ProjectionDirectionType) - Method in interface nxopen.cae.EdgeFaceImprintBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setProjectionDirectionMethod(ImprintBuilder.ProjectionDirectionType) - Method in interface nxopen.cae.ImprintBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setProjectionDirectionMethod(ProjectCurveBuilder.DirectionType) - Method in interface nxopen.features.ProjectCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setProjectionDirectionOption(FitCurveBuilder.ProjectionDirectionOptions) - Method in interface nxopen.features.FitCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setProjectionDirectionOption(JointmarkBuilder.ProjectionDirectionOptions) - Method in interface nxopen.weld.JointmarkBuilder

License requirements: ugweld ("UG WELD")
.

setProjectionFaces(Face[]) - Method in interface nxopen.cam.InspectionPointFeatureBuilder

Sets the point inspection feature projection faces
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setProjectionMethod(WeldProjectionMethod) - Method in interface nxopen.weld.WeldPointBuilder

Sets the project method type.

setProjectionNormalFace(SurfaceIntersectionBuilder.NormalTypes) - Method in interface nxopen.geometricanalysis.SurfaceIntersectionBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setProjectionOption(MeshPointProjectBuilder.ProjectionMethod) - Method in interface nxopen.cae.MeshPointProjectBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setProjectionOption(ProjectCurveBuilder.ProjectionOptionType) - Method in interface nxopen.features.ProjectCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setProjectionOption(SurfaceIntersectionBuilder.ProjectionTypes) - Method in interface nxopen.geometricanalysis.SurfaceIntersectionBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setProjectionPlane(Point3d, Vector3d, Vector3d) - Method in interface nxopen.layout2d.CreateComponentFrom3DBuilder

Sets the projection plane specified by origin, y and z vectors, where z is the plane normal and the x vector is computed.

setProjectionTolerance(double) - Method in interface nxopen.cae.MeshPointProjectBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setProjectionVector(Direction) - Method in interface nxopen.cae.EdgeFaceImprintBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setProjectionVector(Direction) - Method in interface nxopen.cae.ImprintBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setProjectionVector(Direction) - Method in interface nxopen.facet.SnipFacetBodyBuilder

License requirements: None.

setProjectionVector(Direction) - Method in interface nxopen.features.ProjectCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setProjectionVector(Direction) - Method in interface nxopen.MeasureDistanceBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setProjectionXYZ(SurfaceIntersectionBuilder.XyzTypes) - Method in interface nxopen.geometricanalysis.SurfaceIntersectionBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setProjectLastPointToSafePlane(boolean) - Method in interface nxopen.cam.InspectionPathBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setProjectLeader(String) - Method in interface nxopen.tooling.ConcurrentDesignManagementBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setProjectLimit(double) - Method in interface nxopen.cam.InspectionMeasDataBuilder

License requirements: None.

setProjectName(String) - Method in interface nxopen.tooling.InitProjectBuilder

License requirements: None.

setProjectPlaneNormal(Direction) - Method in interface nxopen.features.AOCSBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.

setProjectPoint(Point) - Method in interface nxopen.features.GeodesicProjectBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setProjectsData(String[], int[]) - Method in interface nxopen.FileNew

Deprecated.

Deprecated in NX10.0.0. Use Session.assignRemoveProjects(java.lang.String[], nxopen.Session.ProjectAssignmentObjectType[], java.lang.String[], nxopen.Session.ProjectAssignmentState[]) to assign/remove projects.

setProjectStartPointToSafePlane(boolean) - Method in interface nxopen.cam.InspectionPathBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setProjectToNearestGeometry(boolean) - Method in interface nxopen.cae.MeshPointProjectBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setProjectToSecondWall(boolean) - Method in interface nxopen.features.FaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setProjectType(GeodesicProjectBuilder.Type) - Method in interface nxopen.features.GeodesicProjectBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setProjectVector(Direction) - Method in interface nxopen.geometricutilities.ProjectionOptions

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setProjectVertices(boolean) - Method in interface nxopen.cae.MappedMeshBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setProjectWorkPartOrigin(boolean) - Method in interface nxopen.SketchInPlaceBuilder

Deprecated.

Deprecated in NX11.0.0. Use SketchInPlaceBuilder.setOriginOption(nxopen.OriginMethod) instead.

setProjPathStr(String) - Method in interface nxopen.tooling.InitProjBuilder

License requirements: None.

setProjTempOpt(InitProjBuilder.ProjTempOption) - Method in interface nxopen.tooling.InitProjBuilder

License requirements: None.

setProjVec(UFVariant, double[]) - Method in interface nxopen.uf.UFDrpos

Refer to UF_DRPOS_set_proj_vec for documentation.

setPrompt(String) - Method in interface nxopen.uf.UFUi

Refer to UF_UI_set_prompt for documentation.

setPromptVar(InspectionCmmCommandBuilder.PromptVars) - Method in interface nxopen.cam.InspectionCmmCommandBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setPropagateActions(boolean) - Method in interface nxopen.uf.UFClone

Refer to UF_CLONE_set_propagate_actions for documentation.

setPropagateBreakLines(boolean) - Method in interface nxopen.preferences.PartDrafting

Sets the propagation of view break.

setPropagatePastSharpEdges(boolean) - Method in interface nxopen.features.FaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setPropagateViewBreak(boolean) - Method in interface nxopen.drawings.ViewBreakBuilder

License requirements: drafting ("DRAFTING")
.

setPropagationAngle(double) - Method in interface nxopen.features.FaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setProperty(TaggedObject, String, String) - Method in interface nxopen.Session

Sets a named property of the object.

setProperty() - Method in interface nxopen.tooling.DieEngStampingOutputBuilder

The set stamping output display property method
License requirements: die_engineering ("DIE ENGINEERING")
.

setProperty(Property) - Method in interface nxopen.visualreporting.Condition

License requirements: nx_visual_reporting ("Visual Reporting")
.

setPropertyDataType(ExternalConnectionElementBuilder.DataType) - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setPropertyForComparison(Condition, Property) - Method in interface nxopen.visualreporting.VisualReportBuilder

Sets the Property in the value for comparison of this Condition .

setPropertyId(int) - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setPropertyId(int) - Method in interface nxopen.mechatronics.GanttOperationConditionBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setPropertyId(int) - Method in interface nxopen.mechatronics.GanttOperationParameterBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setPropertyIndexToPlot(int) - Method in interface nxopen.cae.SimBcPlotContoursBuilder

Deprecated.

Deprecated in NX9.0.0. Use SimBcPlotContoursBuilder.setPropertyNameToPlot(java.lang.String) instead.

setPropertyName(String) - Method in interface nxopen.mechatronics.GanttOperationConditionBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setPropertyNameToPlot(String) - Method in interface nxopen.cae.SimBcPlotContoursBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setPropertyNameToPlot(String) - Method in interface nxopen.cae.SimBcXyPlotBuilder

Sets property name to plot.

setPropertyOfCondition(Condition, Property) - Method in interface nxopen.visualreporting.VisualReportBuilder

Sets the Property of this condition.

setPropertyOption(NodeElementInfoBuilder.PropertyType) - Method in interface nxopen.cae.NodeElementInfoBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setPropertySpecification(Property, String) - Method in interface nxopen.visualreporting.VisualReportBuilder

Sets the property specification of the Property being built by this builder.

setPropertySpecification(Property, String, String) - Method in interface nxopen.visualreporting.VisualReportBuilder

Sets the property specification of the Property being built by this builder.

setPropertyStatus(String, boolean) - Method in interface nxopen.features.shipdesign.FilterBuilder

GSts the current status true == on or selected, false == off or not selected of the input property.

setPropertyValue(String, String) - Method in interface nxopen.issue.IssueContent

Sets the value of IssueProperty
License requirements: nx_issue_mgmt ("NX Issue Tracking")

Created in NX8.5.0

setPropertyValue(String, String) - Method in interface nxopen.issue.IssueContentBuilder

Sets the value of IssueProperty
License requirements: nx_issue_mgmt ("NX Issue Tracking")

Created in NX8.5.0

setProportionalAllU(boolean) - Method in interface nxopen.features.StudioXformBuilder

Deprecated.

Deprecated in NX8.5.0. Use StudioXformBuilderEx instead.

setProportionalAllU(boolean) - Method in interface nxopen.features.StudioXformBuilderEx

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setProportionalAllV(boolean) - Method in interface nxopen.features.StudioXformBuilder

Deprecated.

Deprecated in NX8.5.0. Use StudioXformBuilderEx instead.

setProportionalAllV(boolean) - Method in interface nxopen.features.StudioXformBuilderEx

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setProportionalFallOffScale(double) - Method in interface nxopen.features.StudioXformBuilder

Deprecated.

Deprecated in NX8.5.0. Use StudioXformBuilderEx instead.

setProportionalFallOffScale(double) - Method in interface nxopen.features.StudioXformBuilderEx

Deprecated.

Deprecated in NX8.5.0. Use StudioXformBuilderEx.setFallOffScale(double) instead.

setProportionalMoveAfterU(int) - Method in interface nxopen.features.StudioXformBuilder

Deprecated.

Deprecated in NX8.5.0. Use StudioXformBuilderEx instead.

setProportionalMoveAfterU(int) - Method in interface nxopen.features.StudioXformBuilderEx

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setProportionalMoveAfterV(int) - Method in interface nxopen.features.StudioXformBuilder

Deprecated.

Deprecated in NX8.5.0. Use StudioXformBuilderEx instead.

setProportionalMoveAfterV(int) - Method in interface nxopen.features.StudioXformBuilderEx

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setProportionalMoveBeforeU(int) - Method in interface nxopen.features.StudioXformBuilder

Deprecated.

Deprecated in NX8.5.0. Use StudioXformBuilderEx instead.

setProportionalMoveBeforeU(int) - Method in interface nxopen.features.StudioXformBuilderEx

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setProportionalMoveBeforeV(int) - Method in interface nxopen.features.StudioXformBuilder

Deprecated.

Deprecated in NX8.5.0. Use StudioXformBuilderEx instead.

setProportionalMoveBeforeV(int) - Method in interface nxopen.features.StudioXformBuilderEx

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setProportionalPoleControlOption(StudioXformBuilderEx.ProportionalPoleControlType) - Method in interface nxopen.features.StudioXformBuilderEx

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setProtectCell(boolean) - Method in interface nxopen.annotations.TableCellStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setProtectCells(boolean) - Method in interface nxopen.annotations.TableColumnBuilder

License requirements: drafting ("DRAFTING")
.

setProtectedMove(boolean) - Method in interface nxopen.cam.MoveBuilder

License requirements: cam_base ("CAM BASE")
.

setProtectionAreaElementIndex(int) - Method in interface nxopen.sim.SinumerikCaExportBuilder

License requirements: nx_sinumerik_ca ("Sinumerik Collision Avoidance")
.

setProtectionAreaIndex(int) - Method in interface nxopen.sim.SinumerikCaExportBuilder

License requirements: nx_sinumerik_ca ("Sinumerik Collision Avoidance")
.

setPrototypePerpendicularVector(Vector3d) - Method in interface nxopen.positioning.ConstraintReference

Set the value of the perpendicular vector.

setProtractorEnd(Point) - Method in interface nxopen.MeasureAngleBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setProximityTolerance(double) - Method in interface nxopen.cae.ProjectNodesToCadGeometryBuilder

Deprecated.

Deprecated in NX8.5.0. Use CAE.ProjectNodesToCadGeometryBuilder#tolerance instead.

setProxyAttributeForLocking(String) - Method in interface nxopen.AttributeTemplatesBuilder

License requirements: None.

setProxyObjectName(String) - Method in interface nxopen.mechatronics.ProxyObjectBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setProxyOverrideObjectName(String) - Method in interface nxopen.mechatronics.ProxyOverrideObjectBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setPsdfitFittedData(double[], double[], double[], double, double) - Method in interface nxopen.cae.AfuMathFastRMSOutput

License requirements: nx_ftk ("NX Advanced Graphing")
.

setPsdfitOriginalData(double[], double[]) - Method in interface nxopen.cae.AfuMathFastRMSOutput

License requirements: nx_ftk ("NX Advanced Graphing")
.

setPsmOutputBody(boolean) - Method in interface nxopen.features.ExtractFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT")
.

setPT11Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPT11LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPT11Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPT11RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPT12Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPT12LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPT12Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPT12RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPT14Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPT14LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPT14Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPT14RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPT15Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPT15LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPT15Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPT15RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPT16Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPT16LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPT16Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPT16RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPT4Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPT4LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPT4Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPT4RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPT6Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPT6LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPT6Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPT6RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPT7Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPT7LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPT7Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPT7RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setPtCrvConstraint(Tag, UFMotion.PointCurveConstraint) - Method in interface nxopen.uf.UFMotion

Refer to UF_MOTION_set_pt_crv_constraint for documentation.

setPtype(MeasureAngleBuilder.ProjectionType) - Method in interface nxopen.MeasureAngleBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setPublishOptionalInfo(boolean) - Method in interface nxopen.pdm.PartOperationImportBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setPullCoordinateSystem(CoordinateSystem) - Method in interface nxopen.cae.optimization.TBSCastCondition

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setPullDirection(Direction) - Method in interface nxopen.cae.optimization.TBSCastCondition

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setPunchDirection(Direction) - Method in interface nxopen.annotations.LocatorDesignatorBuilder

License requirements: None.

setPunchedWidth(String) - Method in interface nxopen.features.sheetmetal.BeadBuilder

Deprecated.

Deprecated in NX10.0.0. Use Expression.setRightHandSide(java.lang.String) on the Expression object returned from BeadBuilder.punchedWidth() instead.

setPunchInsertTag(TaggedObject) - Method in interface nxopen.tooling.PunchInsertBuilder

License requirements: None.

setPunchOffsetValue(double) - Method in interface nxopen.tooling.PiercingInsertBuilder

License requirements: None.

setPunchOffsetValue(double) - Method in interface nxopen.tooling.PunchInsertBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setPunchOrDie(SpecialPiercingInsertBuilder.PunchOrDieTypes) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setPunchPenetration(double) - Method in interface nxopen.tooling.DieDesPierceInsertBuilder

License requirements: ug_die_design ("Die Design")
.

setPunchPlateClearance(double) - Method in interface nxopen.tooling.BendInsertDesignBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setPunchPlateClearance(double) - Method in interface nxopen.tooling.FormingInsertBuilder

License requirements: None.

setPunchPlateClearance(double) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder

License requirements: None.

setPunchPocketClearanceForBackingPlate(double) - Method in interface nxopen.tooling.PunchInsertBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setPunchPocketClearanceForBP(double) - Method in interface nxopen.tooling.PiercingInsertBuilder

License requirements: None.

setPunchPocketClearanceForPP(double) - Method in interface nxopen.tooling.PiercingInsertBuilder

License requirements: None.

setPunchPocketClearanceForPunchPlate(double) - Method in interface nxopen.tooling.PunchInsertBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setPunchPocketClearanceForSP(double) - Method in interface nxopen.tooling.PiercingInsertBuilder

License requirements: None.

setPunchPocketClearanceForStripperPlate(double) - Method in interface nxopen.tooling.PunchInsertBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setPunchPocketHeightInSP(double) - Method in interface nxopen.tooling.PiercingInsertBuilder

License requirements: None.

setPunchPocketHeightInStripperPlate(double) - Method in interface nxopen.tooling.PunchInsertBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setPunchPocketToggleForBackingPlate(boolean) - Method in interface nxopen.tooling.PunchInsertBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setPunchPocketToggleForBP(boolean) - Method in interface nxopen.tooling.PiercingInsertBuilder

License requirements: None.

setPunchPocketToggleForPP(boolean) - Method in interface nxopen.tooling.PiercingInsertBuilder

License requirements: None.

setPunchPocketToggleForPunchPlate(boolean) - Method in interface nxopen.tooling.PunchInsertBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setPunchPocketToggleForSP(boolean) - Method in interface nxopen.tooling.PiercingInsertBuilder

License requirements: None.

setPunchPocketToggleForStripperPlate(boolean) - Method in interface nxopen.tooling.PunchInsertBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setPunchPocketTypeInBackingPlate(PunchInsertBuilder.PunchPocketTypeItemsBackingPlate) - Method in interface nxopen.tooling.PunchInsertBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setPunchPocketTypeInBP(PiercingInsertBuilder.PunchPocketTypeItemsBP) - Method in interface nxopen.tooling.PiercingInsertBuilder

License requirements: None.

setPunchPocketTypeInPP(PiercingInsertBuilder.PunchPocketTypeItemsPP) - Method in interface nxopen.tooling.PiercingInsertBuilder

License requirements: None.

setPunchPocketTypeInPunchPlate(PunchInsertBuilder.PunchPocketTypeItemsPunchPlate) - Method in interface nxopen.tooling.PunchInsertBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setPunchPocketTypeInSP(PiercingInsertBuilder.PunchPocketTypeItemsSP) - Method in interface nxopen.tooling.PiercingInsertBuilder

License requirements: None.

setPunchPocketTypeInStripperPlate(PunchInsertBuilder.PunchPocketTypeItemsStripperPlate) - Method in interface nxopen.tooling.PunchInsertBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setPunchPosition(double) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setPunchProfile(DirectionOption, IProfile[]) - Method in interface nxopen.die.DrawDiePunchBuilder

Sets the punch profile of the draw die punch casting.

setPunchProfileAttributes(String, String) - Method in interface nxopen.die.DrawDiePunchSectionBuilder

Sets the punch profile edges attributes.

setPunchRadius(String) - Method in interface nxopen.features.sheetmetal.BeadBuilder

Deprecated.

Deprecated in NX10.0.0. Use Expression.setRightHandSide(java.lang.String) on the Expression object returned from BeadBuilder.punchRadius() instead.

setPunchRadius(String) - Method in interface nxopen.features.sheetmetal.DimpleBuilder

Deprecated.

Deprecated in NX10.0.0. Use Expression.setRightHandSide(java.lang.String) on the Expression object returned from DimpleBuilder.getPunchRadius() instead.

setPunchSameOffsetValue(boolean) - Method in interface nxopen.tooling.PiercingInsertBuilder

License requirements: None.

setPunchSameOffsetValue(boolean) - Method in interface nxopen.tooling.PunchInsertBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setPunchShankParaC(double) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder

License requirements: None.

setPunchShankParaFL(double) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder

License requirements: None.

setPunchShankParaL1(double) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder

License requirements: None.

setPunchShankParaLength(double) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder

License requirements: None.

setPunchShankParaPL(double) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder

License requirements: None.

setPunchShankParaR(double) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder

License requirements: None.

setPunchShankParaWidth(double) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder

License requirements: None.

setPurpose(MechatronicsBuilder.PurposeType) - Method in interface nxopen.motion.MechatronicsBuilder

License requirements: mechanisms ("MECHANISMS")
.

setQisvarType(InspectionCmmCommandBuilder.QisvarTypes) - Method in interface nxopen.cam.InspectionCmmCommandBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setQisvarValue(String) - Method in interface nxopen.cam.InspectionCmmCommandBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setQuadOnlyMesh(boolean) - Method in interface nxopen.cae.MappedMeshBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setQuadrantType(HoleReportBuilder.EnumQuadrantType) - Method in interface nxopen.tooling.HoleReportBuilder

License requirements: None.

setQualityPrint(Print3dBuilder.PrintQualityEnum) - Method in interface nxopen.Print3dBuilder

License requirements: None.

setQuan(Result.Quantity) - Method in interface nxopen.cae.ResultVariable

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setQuantityType(AssembliesGeneralPropertiesBuilder.QuantityOptions) - Method in interface nxopen.assemblies.AssembliesGeneralPropertiesBuilder

License requirements: None.

setQuantityType(String, String) - Method in interface nxopen.motion.GraphObjectBuilder

Sets a pair of quantity type and its value of graph object
License requirements: mechanisms ("MECHANISMS")
.

setQueryCurve(QueryCurve) - Method in interface nxopen.cae.QueryCurveUsageOptions

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setQueryName(String) - Method in interface nxopen.assemblies.AttributeSearchTermBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setQuickPickLockDialogPosition(boolean) - Method in interface nxopen.display.SelPref

License requirements: None.

setQuickPickOnDelayToggle(boolean) - Method in interface nxopen.display.SelPref

License requirements: None.

setQuoteDate(String) - Method in interface nxopen.tooling.QuickQuotationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setQuoteNo(String) - Method in interface nxopen.tooling.QuickQuotationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setQuoter(String) - Method in interface nxopen.tooling.QuickQuotationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setRadCutMethod(DmRadBuilder.RadCutMethodType) - Method in interface nxopen.cam.DmRadBuilder

License requirements: None.

setRadial(double) - Method in interface nxopen.motion.BushingCylindricalCoefficientsComponent

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using Motion.BushingCylindricalCoefficientsComponent#radialExpression to query or edit it.

setRadial(String) - Method in interface nxopen.sim.KinematicChain

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setRadialAxis(Axis) - Method in interface nxopen.geometricutilities.ModlMotion

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setRadialDelta(String) - Method in interface nxopen.geometricutilities.PatternClocking

Deprecated.

Deprecated in NX8.0.0. This functionality is no longer supported.

setRadialDistance(double) - Method in interface nxopen.cam.BoundaryTurnMemberOffset

License requirements: cam_base ("CAM BASE")
.

setRadialEngage(String) - Method in interface nxopen.cam.ThreadedHoleSet

License requirements: cam_base ("CAM BASE")
.

setRadialEngageOption(String) - Method in interface nxopen.features.HolePackageBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setRadialEngageOption(String) - Method in interface nxopen.geometricutilities.EndHoleData

License requirements: solid_modeling ("SOLIDS MODELING")
.

setRadialFunction(Function) - Method in interface nxopen.motion.BushingCylindricalCoefficientsComponent

License requirements: mechanisms ("MECHANISMS")
.

setRadialMeasurePoint(Point) - Method in interface nxopen.geometricutilities.ModlMotion

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setRadialOffset(double) - Method in interface nxopen.tooling.StockSizeBuilder

License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setRadialPlaneMode(TurnAvoidanceClearanceBuilder.RadialPlaneModes) - Method in interface nxopen.cam.TurnAvoidanceClearanceBuilder

License requirements: cam_base ("CAM BASE")
.

setRadialPlaneMode(TurnProbeClearanceBuilder.RadialPlaneModes) - Method in interface nxopen.cam.TurnProbeClearanceBuilder

License requirements: cam_base ("CAM BASE")
.

setRadialPlanePoint(Point) - Method in interface nxopen.cam.TurnAvoidanceClearanceBuilder

License requirements: cam_base ("CAM BASE")
.

setRadialPlanePoint(Point) - Method in interface nxopen.cam.TurnProbeClearanceBuilder

License requirements: cam_base ("CAM BASE")
.

setRadialPlanePoint(Point) - Method in interface nxopen.features.SectionCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setRadialPlaneValue(double) - Method in interface nxopen.cam.TurnAvoidanceClearanceBuilder

License requirements: cam_base ("CAM BASE")
.

setRadialPlaneValue(double) - Method in interface nxopen.cam.TurnProbeClearanceBuilder

License requirements: cam_base ("CAM BASE")
.

setRadialPlaneVector(Direction) - Method in interface nxopen.features.SectionCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setRadialSafeClearance(double) - Method in interface nxopen.cam.NcmTurnRoughFinishBuilder

License requirements: cam_base ("CAM BASE")
.

setRadialSafeClearance(double) - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder

License requirements: cam_base ("CAM BASE")
.

setRadialSegments(int) - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilder

Deprecated.

Deprecated in NX11.0.0. Use SubdivisionPrimitiveShapeBuilderEx instead.

setRadialSegments(int) - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilderEx

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setRadialStock(double) - Method in interface nxopen.cam.BoundaryTurnBlank

License requirements: cam_base ("CAM BASE")
.

setRadialSymbol(SearchCriteriaDimensionBuilder.RadialSymbolOptions) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder

License requirements: None.

setRadialType(ConnectorCoefficientTypes) - Method in interface nxopen.motion.BushingCylindricalCoefficientsComponent

License requirements: mechanisms ("MECHANISMS")
.

setRadius(double) - Method in interface nxopen.Arc

Sets the radius of the arc.

setRadius(double) - Method in interface nxopen.cam.BoundaryTurnMemberCorner

License requirements: cam_base ("CAM BASE")
.

setRadius(double) - Method in interface nxopen.cam.InspectionArcFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setRadius(double) - Method in interface nxopen.cam.NcmClearanceBuilder

License requirements: cam_base ("CAM BASE")
.

setRadius(double) - Method in interface nxopen.cam.TurnConcaveCornerControl

License requirements: cam_base ("CAM BASE")
.

setRadius(double) - Method in interface nxopen.cam.TurnCornerControl

License requirements: cam_base ("CAM BASE")
.

setRadius(double) - Method in interface nxopen.cam.TurnEngageRetractBuilder

License requirements: cam_base ("CAM BASE")
.

setRadius(double) - Method in interface nxopen.die.ThroatChildBuilder

Sets the radius to be applied at the back of the throat, top and bottom
License requirements: ug_die_design ("Die Design")
.

setRadius(double) - Method in interface nxopen.die.ThroatParentBuilder

Sets the radius to be applied at the back of the throat, top and bottom
License requirements: ug_die_design ("Die Design")
.

setRadius(boolean) - Method in interface nxopen.features.FitSurfaceBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setRadius(String) - Method in interface nxopen.features.sheetmetal.BeadBuilder

Deprecated.

Deprecated in NX10.0.0. Use Expression.setRightHandSide(java.lang.String) on the Expression object returned from BeadBuilder.radius() instead.

setRadius(String) - Method in interface nxopen.geometricutilities.CircularCrossSection

Deprecated.

Deprecated in NX9.0.0. To set the value of the expression modify the expression directly using GeometricUtilities.CircularCrossSection#radius and Expression.setRightHandSide(java.lang.String) .

setRadius(int, double) - Method in interface nxopen.geometricutilities.CircularFrameBuilder

Sets the i-th radius of the circular frame
License requirements: None.

setRadiusConstraintMethod(BridgeCurveBuilderEx.RadiusConstraintMethods) - Method in interface nxopen.features.BridgeCurveBuilderEx

License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_1 ("basic freeform modeling")
.

setRadiusConstraintType(StyledBlendBuilder.StyledBlendRadiusConstraintType) - Method in interface nxopen.features.StyledBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setRadiusDiameterOption(RadialDimensionBuilder.ValueOption) - Method in interface nxopen.features.RadialDimensionBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setRadiusOfDie(String) - Method in interface nxopen.features.sheetmetal.DrawnCutoutBuilder

Deprecated.

Deprecated in NX10.0.0. Use Expression.setRightHandSide(java.lang.String) on the Expression object returned from DrawnCutoutBuilder.radiusOfDie() instead.

setRadiusOption(TurnConcaveCornerControl.RadiusOptions) - Method in interface nxopen.cam.TurnConcaveCornerControl

License requirements: cam_base ("CAM BASE")
.

setRadiusOption(CircularBlendCurveBuilder.CylinderRadiusOption) - Method in interface nxopen.features.CircularBlendCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setRadiusOption(RadiusMethod) - Method in interface nxopen.geometricutilities.CircularCrossSection

License requirements: solid_modeling ("SOLIDS MODELING")
.

setRadiusOptions(GlobalShapingBuilder.RadiusType) - Method in interface nxopen.features.GlobalShapingBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setRadiusOrDistance(double) - Method in interface nxopen.cam.TurnGrooveCornerControl

License requirements: cam_base ("CAM BASE")
.

setRadiusSymbol(RadiusSymbol) - Method in interface nxopen.annotations.DiameterRadiusPreferences

Sets the radius symbol
License requirements: None.

setRadiusSymbol(String) - Method in interface nxopen.annotations.RadialStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setRadiusSymbolText(String) - Method in interface nxopen.annotations.DiameterRadiusPreferences

Sets the symbol text for user defined radius symbol
License requirements: None.

setRadiusSymbolType(RadiusSymbol) - Method in interface nxopen.annotations.RadialStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setRadiusToCenter(boolean) - Method in interface nxopen.annotations.BaseRadialDimensionBuilder

Sets the is radius to center
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setRadiusToggle(boolean) - Method in interface nxopen.cam.ToolChangeCiBuilder

License requirements: cam_base ("CAM BASE")
.

setRadiusTolerance(double) - Method in interface nxopen.cam.NCAssistantBuilder

License requirements: cam_base ("CAM BASE")
.

setRadStepoverType(DmRadBuilder.RadStepoverTypeType) - Method in interface nxopen.cam.DmRadBuilder

License requirements: None.

setRadTraverseDir(DmRadBuilder.RadTraverseDirType) - Method in interface nxopen.cam.DmRadBuilder

License requirements: None.

setRailingFeature(Feature) - Method in interface nxopen.linedesigner.RailOpeningFeatureBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setRailType(MeshFromBoundaryBuilder.RailOption) - Method in interface nxopen.cae.MeshFromBoundaryBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setRampAngle(double) - Method in interface nxopen.cam.NcmEngRetBuilder

License requirements: cam_base ("CAM BASE")
.

setRampAngle(double) - Method in interface nxopen.cam.NcmPlanarEngRetBuilder

License requirements: cam_base ("CAM BASE")
.

setRampAngle(double) - Method in interface nxopen.cam.NcmScEngRetBuilder

License requirements: cam_base ("CAM BASE")
.

setRampAngleOption(TrimPoint.RampAngleOptions) - Method in interface nxopen.cam.TrimPoint

License requirements: cam_base ("CAM BASE")
.

setRampAngleVector(NXObject) - Method in interface nxopen.cam.TrimPoint

License requirements: cam_base ("CAM BASE")
.

setRampSteps(InsertAuxiliaryBuilder.RampStepsType) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setRandomColorDisplay(PartVisualizationColorSetting.RandomColorDisplayFor) - Method in interface nxopen.preferences.PartVisualizationColorSetting

Sets the random color display selection.

setRandomColorDisplayOption(boolean) - Method in interface nxopen.preferences.PartVisualizationColorSetting

Sets the random color display flag.

setRandomfatigue(DurabilityRandomFatigue) - Method in interface nxopen.cae.DurabilityRandomEventBuilder

The random fatigue.

setRandomFatigueMethod(DurabilityRandomFatigueBuilder.RandomFatigueMethodEnum) - Method in interface nxopen.cae.DurabilityRandomFatigueBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setRangeDepth(BladeCutLevels.RangeDepthTypes) - Method in interface nxopen.cam.BladeCutLevels

License requirements: cam_base ("CAM BASE")
.

setRangeDepth(int, double, CutLevel.MeasureTypes) - Method in interface nxopen.cam.CutLevel

Set the range depth
License requirements: cam_base ("CAM BASE")
.

setRangeDepthPerCut(int, double) - Method in interface nxopen.cam.CutLevel

Set the range depth per cut
License requirements: cam_base ("CAM BASE")
.

setRangeGeometry(int, NXObject) - Method in interface nxopen.cam.CutLevel

Set the range geometry
License requirements: cam_base ("CAM BASE")
.

setRangeMethodOfRule(Rule, Classifier.RangeMethodOption) - Method in interface nxopen.visualreporting.VisualReportBuilder

Sets the Classifier.RangeMethodOption of the active Classifier in the given Rule .

setRangeType(CutLevel.RangeTypes) - Method in interface nxopen.cam.CutLevel

License requirements: cam_base ("CAM BASE")
.

setRangeType(Tag, UFParam.ClvRangeType) - Method in interface nxopen.uf.UFCutLevels

Refer to UF_CUT_LEVELS_set_range_type for documentation.

setRangeValue(Face, double[]) - Method in interface nxopen.tooling.EnlargeSurfaceBuilder

Sets the value of surface range to buider data according to range face.

setRapid(NXColor) - Method in interface nxopen.cam.PathDisplayColors

License requirements: cam_base ("CAM BASE")
.

setRapidFeedRate(double) - Method in interface nxopen.cam.HoleMakingBuilder

License requirements: cam_base ("CAM BASE")
.

setRaptoOffsetToggle(boolean) - Method in interface nxopen.cam.HoleMakingBuilder

License requirements: cam_base ("CAM BASE")
.

setRasterImages(boolean) - Method in interface nxopen.CGMBuilder

License requirements: None.

setRasterImages(boolean) - Method in interface nxopen.PlotBuilder

License requirements: None.

setRasterImages(boolean) - Method in interface nxopen.PrintBuilder

License requirements: None.

setRasterImages(boolean) - Method in interface nxopen.PrintPDFBuilder

License requirements: None.

setRatio(double) - Method in interface nxopen.features.SectionCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setRatio(double) - Method in interface nxopen.motion.CouplerBuilder

Deprecated.

Deprecated in NX8.5.0. Obtion the exression using CouplerBuilder.ratioExpression() to query or edit it.

setRationalOutput(boolean) - Method in interface nxopen.features.AestheticFaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setRayleighDamping(double, double) - Method in interface nxopen.cae.responsesimulation.ModalProperties

Set rayleigh's damping for all normal modes
License requirements: nx_response_anlys ("NX Response Analysis")
.

setRayTracedStudioDisplayGamma(double) - Method in interface nxopen.display.RayTracedStudioEditorBuilder

License requirements: None.

setRayTracedStudioStaticImageDotsPerInch(int) - Method in interface nxopen.display.RayTracedStudioEditorBuilder

License requirements: None.

setRayTracedStudioStaticImageDoubleHeight(double) - Method in interface nxopen.display.RayTracedStudioEditorBuilder

License requirements: None.

setRayTracedStudioStaticImageDoubleWidth(double) - Method in interface nxopen.display.RayTracedStudioEditorBuilder

License requirements: None.

setRayTracedStudioStaticImageFileFormat(RayTracedStudioEditorBuilder.RayTracedStudioStaticImageFileFormatType) - Method in interface nxopen.display.RayTracedStudioEditorBuilder

License requirements: None.

setRayTracedStudioStaticImageLockAspectRatio(boolean) - Method in interface nxopen.display.RayTracedStudioEditorBuilder

License requirements: None.

setRayTracedStudioStaticImageOrientation(RayTracedStudioEditorBuilder.RayTracedStudioStaticImageOrientationType) - Method in interface nxopen.display.RayTracedStudioEditorBuilder

License requirements: None.

setRayTracedStudioStaticImagePixelHeight(int) - Method in interface nxopen.display.RayTracedStudioEditorBuilder

License requirements: None.

setRayTracedStudioStaticImagePixelWidth(int) - Method in interface nxopen.display.RayTracedStudioEditorBuilder

License requirements: None.

setRayTracedStudioStaticImageResolution(RayTracedStudioEditorBuilder.RayTracedStudioStaticImageResolutionType) - Method in interface nxopen.display.RayTracedStudioEditorBuilder

License requirements: None.

setRayTracedStudioStaticImageSize(RayTracedStudioEditorBuilder.RayTracedStudioStaticImageSizeType) - Method in interface nxopen.display.RayTracedStudioEditorBuilder

License requirements: None.

setRayTracedStudioStaticImageUnits(RayTracedStudioEditorBuilder.RayTracedStudioStaticImageUnitsType) - Method in interface nxopen.display.RayTracedStudioEditorBuilder

License requirements: None.

setRcp(ControlPoint) - Method in interface nxopen.routing.Corner

Sets the corner ControlPoint referenced by the Corner object.

setRCP(TaggedObject) - Method in interface nxopen.routing.EditBendAngleBuilder

Set the Bend RCP to edit.

setRcs(CartesianCoordinateSystem) - Method in interface nxopen.cam.OrientGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setReactionArm(double) - Method in interface nxopen.motion.JointFrictionAdams

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using Motion.JointFrictionAdams#reactionArmExpression to query or edit it.

setReactionArm(double) - Method in interface nxopen.motion.JointFrictionRecurDyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using Motion.JointFrictionRecurDyn#reactionArmExpression to query or edit it.

setReactionForce(boolean) - Method in interface nxopen.motion.JointFrictionAdams

Sets the reaction force
License requirements: mechanisms ("MECHANISMS")
.

setReactionForce(boolean) - Method in interface nxopen.motion.JointFrictionRecurDyn

Sets the reaction force
License requirements: mechanisms ("MECHANISMS")
.

setReactionPoint(Point) - Method in interface nxopen.motion.BushingDefine

License requirements: mechanisms ("MECHANISMS")
.

setReactionPoint(Point) - Method in interface nxopen.motion.ConnectorBuilder

License requirements: mechanisms ("MECHANISMS")
.

setReactionPoint(Point) - Method in interface nxopen.motion.ScalarForceBuilder

License requirements: mechanisms ("MECHANISMS")
.

setReaderType(String) - Method in interface nxopen.cae.SimLoadRecipeSource

License requirements: nx_masterfem ("Finite Element Modeling")
.

setReadingDirection(boolean) - Method in interface nxopen.preferences.SessionPmi

Sets the reading direction preference
License requirements: None.

setReadLayerNumFromPrefix(boolean) - Method in interface nxopen.DxfdwgImporter

License requirements: None.

setReadOneModeOrthogonalPair(boolean) - Method in interface nxopen.cae.PostResultPreference

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setReadOnlyString(boolean) - Method in interface nxopen.blockstyler.StringBlock

License requirements: None.

setReadOnlyValue(boolean) - Method in interface nxopen.blockstyler.DoubleBlock

License requirements: None.

setReadOnlyValue(boolean) - Method in interface nxopen.blockstyler.IntegerBlock

License requirements: None.

setReal(double) - Method in interface nxopen.annotations.BaseCustomSymbolBuilder

License requirements: drafting ("DRAFTING")
.

setRealArrayValue(String, double[]) - Method in interface nxopen.cam.CAMObject

Set real array to the parameter index for the object.

setRealData(double[], double[]) - Method in interface nxopen.cae.AfuData

Set the XY Data of an AFU Data Record when the ordinate type is real
License requirements: nx_ftk ("NX Advanced Graphing")
.

setRealData(double, double, double[]) - Method in interface nxopen.cae.AfuData

Set the XY Data of an AFU Data Record when the ordinate type is real and the absicssa type is even
License requirements: nx_ftk ("NX Advanced Graphing")
.

setRealData(double[], double[]) - Method in interface nxopen.cae.ftk.ArrayRecord2D

Sets real points data
License requirements: nx_ftk ("NX Advanced Graphing")
.

setRealOffset(double) - Method in interface nxopen.cae.AfuAbscissaHeaderInfo

Sets the abscissa offset for real part
License requirements: nx_ftk ("NX Advanced Graphing")
.

setRealOffset(double) - Method in interface nxopen.cae.AfuOrdinateHeaderInfo

Sets the offset for real part
License requirements: nx_ftk ("NX Advanced Graphing")
.

setRealQuantity(double) - Method in interface nxopen.assemblies.AssembliesGeneralPropertiesBuilder

License requirements: None.

setRealQuantity(Component, double, String) - Method in interface nxopen.assemblies.ComponentAssembly

Sets the real quantity and corresponding units on this component.

setRealScale(double) - Method in interface nxopen.cae.AfuAbscissaHeaderInfo

Sets the abscissa scale for real part
License requirements: nx_ftk ("NX Advanced Graphing")
.

setRealScale(double) - Method in interface nxopen.cae.AfuOrdinateHeaderInfo

Sets the scale of real part
License requirements: nx_ftk ("NX Advanced Graphing")
.

setRealTimeType(Shadows.RealTimeState) - Method in interface nxopen.display.Shadows

License requirements: None.

setRealUserAttribute(Tag, String, int, double, Tag, boolean) - Method in interface nxopen.uf.UFAttr

Refer to UF_ATTR_set_real_user_attribute for documentation.

setRealValue(double) - Method in interface nxopen.annotations.CustomSymbolTextData

Deprecated.

Deprecated in NX9.0.0. Use MasterSymbolListItemBuilder instead. Use BaseCustomSymbolBuilder.texts() to query list of custom symbol texts.

setRealValue(String, double) - Method in interface nxopen.cam.CAMObject

Set a real value to the parameter index for the object.

setRealValue(Expression) - Method in interface nxopen.mechatronics.ProxyObjectParameterBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setRearCrossPosition(CrashBarrierBuilder.CrossPositionType) - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setRearHeaderFeature(HeadImpactRearHeader) - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setRearLoading(String) - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setRearLoading(String) - Method in interface nxopen.features.vehicledesign.SlopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setRearLoading(String) - Method in interface nxopen.features.vehicledesign.StaticCurbBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setRearOverhang(double) - Method in interface nxopen.features.vehicledesign.BaseDataBuilder

Deprecated.

Deprecated in NX9.0.1. Obtain the expression using BaseDataBuilder.rearOverhangExp() to query or edit it.

setRearOverlapSide(CrashBarrierBuilder.OverlapSideType) - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setRearPositionObject(CrashBarrierBuilder.PositionObjectType) - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setRearShape(CrashBarrierBuilder.ShapeType) - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setRearSurfacePlane(WheelCoveringBuilder.SurfacePlaneType) - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setRearSurfaceSection(WheelCoveringBuilder.SurfaceSectionType) - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setRearUserDefineWidth(boolean) - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setReason(String) - Method in interface nxopen.routing.DesignRuleOverride

Sets the reason of the design rule override is returned
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setReason(String[]) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder

Sets the reason
License requirements: die_engineering ("DIE ENGINEERING")
.

setReason(String) - Method in interface nxopen.validate.OverrideBuilder

License requirements: ug_checkmate ("UG Check Mate")
.

setReassignOnSegments(boolean) - Method in interface nxopen.routing.BranchPathNumberingBuilder

License requirements: routing_hvac ("Routing HVAC")
.

setReassociateLeader(boolean) - Method in interface nxopen.drafting.CutCopyPasteLeaderBuilder

License requirements: drafting ("DRAFTING")
.

setReboundDampingFactor(double) - Method in interface nxopen.motion.BodyContactRecurdyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using BodyContactRecurdyn.reboundDampingFactorExpression() to query or edit it.

setReboundDampingFactorFlag(boolean) - Method in interface nxopen.motion.BodyContactRecurdyn

License requirements: mechanisms ("MECHANISMS")
.

setReboundDistance(double) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setRebuildData(SurfaceRebuildData) - Method in interface nxopen.features.MeshSurfaceBuilder

Sets
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

setRebuildType(Rebuild.RebuildTypes) - Method in interface nxopen.geometricutilities.Rebuild

Sets the rebuild type.

setRecallCsys(CoordinateSystem) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setRecallDid(String) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setRecallExtName(String) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setRecallIntName(String) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setRecallState(InspectionAlignmentBuilder.RecallStates) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setReceiverID(String) - Method in interface nxopen.IgesCreator

License requirements: None.

setRecessAttributes(String, String, int) - Method in interface nxopen.die.WearPlateLocChildBuilder

Sets the recess attributes
License requirements: ug_die_design ("Die Design")
.

setRecessAttributes(String, String, int) - Method in interface nxopen.die.WearPlateLocParentBuilder

Sets the recess attributes
License requirements: ug_die_design ("Die Design")
.

setRecognitionType(FeatureRecognitionBuilder.RecognitionEnum) - Method in interface nxopen.cam.FeatureRecognitionBuilder

License requirements: None.

setRecognizeFlatOption(boolean) - Method in interface nxopen.cam.DmAmBuilder

License requirements: cam_base ("CAM BASE")
.

setRecordAllTransform(boolean) - Method in interface nxopen.preferences.SessionUserInterfaceUI

Sets the record all transform flag
License requirements: None.

setRecordedSteps(int[]) - Method in interface nxopen.motion.LoadTransferBuilder

Sets recorded steps
License requirements: mechanisms ("MECHANISMS")
.

setRecordName(String) - Method in interface nxopen.cae.AfuData

Sets the name of the AFU Data Record
License requirements: nx_ftk ("NX Advanced Graphing")
.

setRecordNetlistHistory(boolean) - Method in interface nxopen.preferences.RoutingElectrical

Sets the option to record import and export activity in the Connection and Component Lists.

setRecordOptionData(String, XyFunctionGeneralType, AfuData.AbscissaType, XyFunctionUnit, AfuData.OrdinateType, XyFunctionUnit, XyFunctionUnit, boolean) - Method in interface nxopen.cae.ftk.OptionSetting

Set the record options data for an AFU Data Record
License requirements: nx_ftk ("NX Advanced Graphing")
.

setRecordPrefix(String) - Method in interface nxopen.cae.responsesimulation.DynamicEvaluationOutputSettings

License requirements: nx_response_anlys ("NX Response Analysis")
.

setRecordPrefix(String) - Method in interface nxopen.cae.responsesimulation.FunctionEvaluationOutputSettings

License requirements: nx_response_anlys ("NX Response Analysis")
.

setRecords(BaseRecord[]) - Method in interface nxopen.cae.xyplot.BasePlotParameters

Sets the records to be plotted
License requirements: nx_ftk ("NX Advanced Graphing")
.

setRecreateDeletedWelds(boolean) - Method in interface nxopen.weld.WeldGrooveBuilder

License requirements: ugweld ("UG WELD")
.

setRecreateStockComponentsOption(boolean) - Method in interface nxopen.routing.StockPartConverterBuilder

License requirements: routing_base ("Routing Basic")
.

setRectangleBase(double) - Method in interface nxopen.weld.WeldBeadSizeBuilder

License requirements: ugweld ("UG WELD")
.

setRectangleHeight(double) - Method in interface nxopen.weld.WeldBeadSizeBuilder

License requirements: ugweld ("UG WELD")
.

setRectangleLayer(int) - Method in interface nxopen.features.SectionInertiaAnalysisBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setRectanglePointFirst(Point) - Method in interface nxopen.features.NSidedSurfaceBuilder

License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

setRectanglePointSecond(Point) - Method in interface nxopen.features.NSidedSurfaceBuilder

License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

setRectanglePointThird(Point) - Method in interface nxopen.features.NSidedSurfaceBuilder

License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

setRectangular(boolean) - Method in interface nxopen.die.RibChildBuilder

Sets the rectangular switch of the die rib, if true the lightening core will be rectangular, if false it will follow the shape of the rib.

setRectangular(boolean) - Method in interface nxopen.die.RibParentBuilder

Sets the rectangular switch of die ribs, if true the lightening cores will be rectangular, if false they will follow the shape of the rib.

setRectangularDimensions(double, double) - Method in interface nxopen.routing.PathStockBuilder

Set the rectangular height and width value for the rectangular space reservation assignment
License requirements: routing_base ("Routing Basic")
.

setRectangularNonuniformGridSize(WorkPlane.NonuniformGridSize) - Method in interface nxopen.preferences.WorkPlane

Set the rectangular nonuniform grid size parameters.

setRectangularOperation(InsertAuxiliaryBuilder.RectOperationOption) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder

License requirements: None.

setRectangularSection(boolean) - Method in interface nxopen.features.SectionInertiaAnalysisBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setRectangularShowMajorLines(boolean) - Method in interface nxopen.preferences.WorkPlane

Sets the show major lines flag for rectangular grid
License requirements: None.

setRectangularUniformGridSize(WorkPlane.GridSize) - Method in interface nxopen.preferences.WorkPlane

Set the rectangular uniform grid size parameters.

setRectangularXVector(Direction) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder

License requirements: None.

setRectangularYVector(Direction) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder

License requirements: None.

setRectDeleteAllComponents(boolean) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder

License requirements: None.

setRecurdynSolverProperty(RecurdynSolverProperty) - Method in interface nxopen.motion.MotionSolutionBuilder

License requirements: mechanisms ("MECHANISMS")
.

setReduceDepthPerCutWhenEmbeded(boolean) - Method in interface nxopen.cam.BladeCutLevels

License requirements: cam_base ("CAM BASE")
.

setReducedFaceType(ReduceSurfaceRadiusBuilder.ReducedFaceTypeSpecification) - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setReduceValueType(ReduceSurfaceRadiusBuilder.ReduceValueTypeSpecification) - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setReductionRate(double) - Method in interface nxopen.cae.optimization.TBSSmoothBuilder

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setRefCS(CoordinateSystem) - Method in interface nxopen.cae.AssignNodalCSBuilder

License requirements: None.

setRefCSType(AssignNodalCSBuilder.CSType) - Method in interface nxopen.cae.AssignNodalCSBuilder

License requirements: None.

setRefCsys(CoordinateSystem) - Method in interface nxopen.cae.NodeModifyLabelBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setRefCsys(CoordinateSystem) - Method in interface nxopen.tooling.StockSizeBuilder

Deprecated.

Deprecated in NX10.0.0. This functionality is no longer supported.

setRefCutter(Tag, Tag) - Method in interface nxopen.uf.UFOper

Refer to UF_OPER_set_ref_cutter for documentation.

setReference(boolean) - Method in interface nxopen.annotations.DrivingValueBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setReference(String[]) - Method in interface nxopen.annotations.LineWeldBuilder

Sets the reference or specification text
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setReference(String) - Method in interface nxopen.cae.AfuHeaderId

Sets the string to define reference direction sense
License requirements: nx_ftk ("NX Advanced Graphing")
.

setReference(LaminateRandomEventBuilder.ReferenceEnum) - Method in interface nxopen.cae.LaminateRandomEventBuilder

Deprecated.

Deprecated in NX10.0.0. Use LaminateDynamicEventBuilder.setReferenceType(nxopen.cae.LaminateDynamicEventBuilder.ReferenceTypeEnum) instead.

setReference(boolean) - Method in interface nxopen.drawings.GeneralViewStyle

Sets the status of reference, that toggles a view from active to reference.

setReference(boolean) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder

License requirements: drafting ("DRAFTING")
.

setReference(boolean) - Method in interface nxopen.preferences.GeneralViewPreferences

Sets the status of reference.A view can have a status of either Active or Reference.

setReference(NXObject, String) - Method in interface nxopen.tooling.ReusablePocketBuilder

Sets reference set.

setReferenceAsString(String) - Method in interface nxopen.blockstyler.OrientXpress

License requirements: None.

setReferenceAttribute(String, String) - Method in interface nxopen.NXObject

Deprecated.

Deprecated in NX8.0.0. Use NXObject.setUserAttribute(nxopen.NXObject.AttributeInformation, nxopen.Update.Option) instead.

setReferenceAttribute(String, String, Update.Option) - Method in interface nxopen.NXObject

Deprecated.

Deprecated in NX8.0.0. Use NXObject.setUserAttribute(nxopen.NXObject.AttributeInformation, nxopen.Update.Option) instead.

setReferenceCenter(Point3d) - Method in interface nxopen.tooling.ElectrodeBlankBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setReferenceCharacteristic(String, String) - Method in interface nxopen.routing.Port

Sets a reference characteristics on the port.

setReferenceComponent(AssembliesGeneralPropertiesBuilder.ReferenceComponentOptions) - Method in interface nxopen.assemblies.AssembliesGeneralPropertiesBuilder

License requirements: None.

setReferenceCoordinateSystem(CoordinateSystem) - Method in interface nxopen.cae.optimization.TBSBaseDesignVariableBuilder

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setReferenceCoordinateSystem(CoordinateSystem) - Method in interface nxopen.cae.optimization.TBSTopologyLinkCondition

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setReferenceCoordinateSystem(CoordinateSystem) - Method in interface nxopen.cae.responsesimulation.CsdEvaluationSettingBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setReferenceCsys(TaggedObject) - Method in interface nxopen.blockstyler.OrientXpress

License requirements: None.

setReferenceCsys(Result.CoordinateSystem) - Method in interface nxopen.cae.FreeBodyResultsBuilder

The reference coordinate system
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setReferenceCsys(CoordinateSystem) - Method in interface nxopen.cae.MechanicalLoadSumBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setReferenceCsys(CoordinateSystem) - Method in interface nxopen.cae.SolidPropertyCheckBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setReferenceCSYS(CoordinateSystem) - Method in interface nxopen.features.ScaleCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setReferenceCsysType(ToolingBoxBuilder.RefCsysType) - Method in interface nxopen.features.ToolingBoxBuilder

License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard") OR studio_free_form ("STUDIO FREE FORM") OR features_modeling ("FEATURES MODELING") OR solid_modeling ("SOLIDS MODELING")
.

setReferenceCsysType(StockSizeBuilder.RefCsysType) - Method in interface nxopen.tooling.StockSizeBuilder

License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setReferenceCurveColor(int) - Method in interface nxopen.preferences.PartSketch

Sets the sketch reference curve color
License requirements: None.

setReferenceCurves(Curve[]) - Method in interface nxopen.die.Tip

Sets reference curves in the die tip feature.

setReferencedAttachmentId(String) - Method in interface nxopen.issue.IssueAttachment

License requirements: nx_issue_mgmt ("NX Issue Tracking")
.

setReferencedCoordinateSystem(CoordinateSystem) - Method in interface nxopen.cae.optimization.TBSCheckDOF

License requirements: cae_opt_toposhape ("NX Shape Optimization")
.

setReferenceDimension(boolean) - Method in interface nxopen.annotations.DimensionPreferences

Sets the flag indicating whether the dimension is a reference dimension
License requirements: None.

setReferenceDimension(boolean) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setReferenceDimensionColor(int) - Method in interface nxopen.preferences.PartSketch

Sets the sketch reference dimension color
License requirements: None.

setReferenceDimensionFlag(boolean) - Method in interface nxopen.annotations.Dimension

Sets a setting to control the visibility of the reference parenthesis of a dimension.

setReferenceDimensionPrefix(String) - Method in interface nxopen.annotations.DimensionPreferences

Sets the prefix characters for reference dimension
License requirements: None.

setReferenceDimensionPrefix(String) - Method in interface nxopen.annotations.DimensionStyleBuilder

Sets the prefix characters for reference dimension
License requirements: None.

setReferenceDimensionSuffix(String) - Method in interface nxopen.annotations.DimensionPreferences

Sets the suffix characters for reference dimension
License requirements: None.

setReferenceDimensionSuffix(String) - Method in interface nxopen.annotations.DimensionStyleBuilder

Sets the suffix characters for reference dimension
License requirements: None.

setReferenceDirection(boolean) - Method in interface nxopen.die.DrawBeadBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setReferenceDirection(Direction) - Method in interface nxopen.features.IsoclineCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setReferenceDirection(IReferenceAxis, AxisOrientation) - Method in interface nxopen.features.RPOBuilder

Sets a horizontal or vertical reference for the feature.

setReferenceDirection(Vector3d) - Method in interface nxopen.features.shipdesign.EdgeCutBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setReferenceDirection(Vector3d) - Method in interface nxopen.features.shipdesign.StiffenerBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setReferenceDirection(IReferenceAxis, Vector3d, AxisOrientation, Sense) - Method in interface nxopen.Sketch

Sets the reference direction of the sketch.

setReferenceDirection(Direction) - Method in interface nxopen.tooling.BlendCurve3DBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING")
.

setReferenceDirectionOption(ImageBaseBuilder.ReferenceDirection) - Method in interface nxopen.display.ImageBaseBuilder

License requirements: None.

setReferenceDirectionOption(SilhouetteFlangeBuilder.ReferenceDirectionOptions) - Method in interface nxopen.features.SilhouetteFlangeBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setReferencedObjects(Function[]) - Method in interface nxopen.cae.FunctionBuilder

Sets referenced objects of a math function.

setReferencedSolution(SimSolution) - Method in interface nxopen.cae.optimization.TBSOptimizationSolutionBuilder

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setReferencedSolution(SimSolution) - Method in interface nxopen.cae.responsesimulation.SolutionBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setReferencedSpindle(String) - Method in interface nxopen.sim.KinematicChannelBuilder

Sets a referenced spindle of the channel
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setReferencedSpindles(String[]) - Method in interface nxopen.sim.KinematicChannelBuilder

Sets a list of referenced spindles of the channel
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setReferenceEdgesOnly(boolean) - Method in interface nxopen.drawings.HiddenLinesViewStyle

Sets the status of reference edges only.This controls the rendering of hidden edges with annotation.

setReferenceEdgesOnly(boolean) - Method in interface nxopen.drawings.ViewStyleHiddenLinesBuilder

License requirements: drafting ("DRAFTING")
.

setReferenceEdgesOnly(boolean) - Method in interface nxopen.preferences.HiddenLinesViewPreferences

Sets the status of reference edges only.This controls the rendering of hidden edges with annotation.

setReferenceElement(FEElement) - Method in interface nxopen.cae.responsesimulation.CsdEvaluationSettingBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setReferenceElementDataComponent(DirectionDataComponent) - Method in interface nxopen.cae.responsesimulation.CsdEvaluationSettingBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setReferenceEntity(NXObject) - Method in interface nxopen.features.sheetmetal.RebendBuilder

Sets the non-thickness planar face or linear edge to remain fixed while part is rebent
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setReferenceEntity(NXObject) - Method in interface nxopen.features.sheetmetal.UnbendBuilder

Sets the non-thickness planar face or linear edge to remain fixed while part is unbent
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setReferenceFaceNormalReversed(boolean) - Method in interface nxopen.features.LawExtensionBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING")
.

setReferenceFaceNormalReversed(boolean) - Method in interface nxopen.features.LawExtensionBuilderEx

License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING")
.

setReferenceFeature(Feature) - Method in interface nxopen.die.OutputCurvesBuilder

Sets the reference feature - must be either a die section or form task feature
License requirements: die_engineering ("DIE ENGINEERING")
.

setReferenceFeatureAutoName(String) - Method in interface nxopen.cam.InspectionPathBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setReferenceFeatureMode(InspectionMethodBuilder.ReferenceFeatureModeTypes) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setReferenceFeatureModeValue(InspectionMethodBuilder.ReferenceFeatureModeTypes) - Method in interface nxopen.cam.InspectionPathBuilder

Set the reference feature mode
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setReferenceFeatureName(String) - Method in interface nxopen.cam.InspectionPathBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setReferenceFeatureName(String) - Method in interface nxopen.features.shipdesign.ManufacturingPreparationBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setReferenceFeatureOffsetDistance(double) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setReferenceFeatureOffsetDistanceValue(double) - Method in interface nxopen.cam.InspectionPathBuilder

Set the reference feature offset distance
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setReferenceFeaturePointCount(int) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setReferenceFeaturePointCountValue(int) - Method in interface nxopen.cam.InspectionPathBuilder

Set the reference feature point count
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setReferenceFeatureZoneRadius(double) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setReferenceFeatureZoneRadiusValue(double) - Method in interface nxopen.cam.InspectionPathBuilder

Set the reference feature zone radius
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setReferenceFrame(MotionSensorBuilder.Reference) - Method in interface nxopen.motion.MotionSensorBuilder

License requirements: mechanisms ("MECHANISMS")
.

setReferenceGeometryGapTolerance(double) - Method in interface nxopen.drafting.AutomationRuleBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setReferenceGeometryImportColor(int) - Method in interface nxopen.preferences.SessionNXGateway

Sets the reference geometry import color for I-DEAS
License requirements: None.

setReferenceGeometryImportLayer(int) - Method in interface nxopen.preferences.SessionNXGateway

Sets the reference geometry import layer for I-DEAS
License requirements: None.

setReferenceGeometrySearchDistance(double) - Method in interface nxopen.drafting.AutomationPreferencesBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setReferenceId(int) - Method in interface nxopen.cae.AfuHeaderId

Sets the ID of reference element or node
License requirements: nx_ftk ("NX Advanced Graphing")
.

setReferenceId(String) - Method in interface nxopen.routing.RunItem

Sets the unique reference identifier for this Run Item.

setReferenceIndex(int) - Method in interface nxopen.annotations.BaseCenterline3dBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setReferenceNode(boolean) - Method in interface nxopen.cae.DeformationParameters

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setReferenceNode(FENode) - Method in interface nxopen.cae.responsesimulation.CsdEvaluationSettingBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setReferenceNodeDataComponent(DirectionDataComponent) - Method in interface nxopen.cae.responsesimulation.CsdEvaluationSettingBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setReferenceNodeLabel(int) - Method in interface nxopen.cae.DeformationParameters

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setReferenceNodeLabel(int) - Method in interface nxopen.cae.ResultParameters

Sets the node label which identifies the reference node used when plotting the result
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setReferenceObject(IGraphSource) - Method in interface nxopen.motion.GraphObjectBuilder

License requirements: mechanisms ("MECHANISMS")
.

setReferenceObject(LogicalObject) - Method in interface nxopen.pdm.PartOperationAttributePropertiesBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setReferenceObjectForPlacement(TaggedObject, Point3d) - Method in interface nxopen.mechanicalrouting.PartPlacementBuilder

Sets the reference object and reference location for placement.

setReferenceOption(OrientXpressBuilder.Reference) - Method in interface nxopen.geometricutilities.OrientXpressBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setReferenceOption(StyledSweepReferenceMethodBuilder.ReferenceOptions) - Method in interface nxopen.geometricutilities.StyledSweepReferenceMethodBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setReferenceOutputColor(NXColor) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setReferenceOutputFont(PedestrianProtectionBuilder.Font) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setReferenceOutputLayer(int) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setReferenceOutputWidth(PedestrianProtectionBuilder.Width) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setReferencePlane(Plane) - Method in interface nxopen.cam.NCAssistantBuilder

License requirements: cam_base ("CAM BASE")
.

setReferencePlane(Plane) - Method in interface nxopen.features.shipdesign.CustomBracketBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setReferencePlane(InverseBendingLinesBuilder.ReferencePlaneType) - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setReferencePlane(TabNoteCfgBuilder.Refplane) - Method in interface nxopen.features.TabNoteCfgBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setReferencePlane(DatumPlane) - Method in interface nxopen.features.vehicledesign.BaseDataLoadingBuilder

Sets the reference plane to represent the loading plane.

setReferencePlaneLocation(boolean) - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setReferencePlanePoint(Point) - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setReferencePoint(Point) - Method in interface nxopen.cam.BoundaryTurnBlank

License requirements: cam_base ("CAM BASE")
.

setReferencePoint(Point) - Method in interface nxopen.cam.InspectionOperationTransformBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setReferencePoint(Point) - Method in interface nxopen.cam.OperationTransformBuilder

License requirements: cam_base ("CAM BASE")
.

setReferencePoint(Point) - Method in interface nxopen.cam.ToolPathEditorBuilder

License requirements: None.

setReferencePoint(Point3d) - Method in interface nxopen.die.OutputCurvesBuilder

Sets the reference point.

setReferencePoint(Point3d) - Method in interface nxopen.die.QuickBinderBuilder

Set the point used to determine the start and end side of the face.

setReferencePoint(boolean, HumanData.ReferencePointType, Point) - Method in interface nxopen.features.HumanBuilder

Sets the reference point
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setReferencePoint(Point) - Method in interface nxopen.features.MirrorBuilder

Deprecated.

Deprecated in NX9.0.0. Use GeometricUtilities.PatternReferencePointServiceBuilder#setPoint instead.

setReferencePoint(Point) - Method in interface nxopen.features.PatternFeatureBuilder

Deprecated.

Deprecated in NX9.0.0. Use GeometricUtilities.PatternReferencePointServiceBuilder#setPoint instead.

setReferencePoint(Point) - Method in interface nxopen.features.ScaleCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setReferencePoint(Point3d) - Method in interface nxopen.features.shipdesign.EdgeCutBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setReferencePoint(Point3d) - Method in interface nxopen.features.shipdesign.StiffenerBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setReferencePoint(Point) - Method in interface nxopen.features.SweptVolumeBuilder

License requirements: None.

setReferencePoint(Point3d) - Method in interface nxopen.features.TrimCornerBuilder

Sets the reference point
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setReferencePoint(Point) - Method in interface nxopen.motion.RoadBuilder

License requirements: mechanisms ("MECHANISMS")
.

setReferencePoint(Point) - Method in interface nxopen.routing.FormboardFrame

Sets the formboard frame reference point
License requirements: routing_harness ("Routing Harness")
.

setReferencePoint(Point) - Method in interface nxopen.tooling.WorkpieceBuilder

License requirements: None.

setReferencePointCoordinates(Point3d) - Method in interface nxopen.features.HumanBuilder

Sets the reference point coordinates.

setReferencePointForEqualArcLength(Point) - Method in interface nxopen.features.ProjectCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setReferencePointInferred(boolean) - Method in interface nxopen.geometricutilities.PatternReferencePointServiceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setReferencePointJunction(String) - Method in interface nxopen.sim.KinematicChain

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setReferencePointPrecision(double) - Method in interface nxopen.tooling.ElectrodeBlankBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setReferencePointType(HumanData.ReferencePointType) - Method in interface nxopen.features.HumanBuilder

Sets the reference point type
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setReferencePosition(Point) - Method in interface nxopen.tooling.StandardPartPositionBuilder

License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setReferencePositionType(TransientText.StandardTextRef) - Method in interface nxopen.display.TransientText

Sets the position of the text relative to positions on the text box
License requirements: None.

setReferencePropertiesOfReport(Property[], VisualReportBuilder.PropertyUsageOption[]) - Method in interface nxopen.visualreporting.VisualReportBuilder

Sets the message Property list of the VisualReport .

setReferencePropertiesOfReportingProperty(Property[], VisualReportBuilder.PropertyUsageOption[]) - Method in interface nxopen.visualreporting.VisualReportBuilder

Sets the message Property list of the Property in the active Classifier .

setReferencePropertyValue(String, NXObject) - Method in interface nxopen.cae.PropertyTable

Sets the referenced object value of the property
License requirements: None.

setReferencePropertyValueArray(String, NXObject[]) - Method in interface nxopen.cae.PropertyTable

Sets the array of referenced objects in the property value
License requirements: None.

setReferencePt1(CorrelAlignmentBuilder.ReferencePt) - Method in interface nxopen.cae.CorrelAlignmentBuilder

Sets the reference common origin point
License requirements: nx_correl_base ("FE Correlation")
.

setReferencePt2(CorrelAlignmentBuilder.ReferencePt) - Method in interface nxopen.cae.CorrelAlignmentBuilder

Sets the reference first axis origin point
License requirements: nx_correl_base ("FE Correlation")
.

setReferencePt3(CorrelAlignmentBuilder.ReferencePt) - Method in interface nxopen.cae.CorrelAlignmentBuilder

Sets the reference second axis point
License requirements: nx_correl_base ("FE Correlation")
.

setReferenceSet(CreateNewComponentBuilder.ComponentReferenceSetType) - Method in interface nxopen.assemblies.CreateNewComponentBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setReferenceSet(DesignElementBuilder.ReferenceSetType) - Method in interface nxopen.assemblies.DesignElementBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setReferenceSet(String) - Method in interface nxopen.mechanicalrouting.PartPlacementBuilder

Sets the reference set for the Design Elements created during part placement operation.

setReferenceSet(StandardPartBuilder.RefsetName) - Method in interface nxopen.tooling.StandardPartBuilder

License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setReferenceSetBehavior(ReferenceSetBehavior) - Method in interface nxopen.drawings.ViewStyleInheritPmiBuilder

License requirements: drafting ("DRAFTING")
.

setReferenceSetName(String) - Method in interface nxopen.assemblies.CreateNewComponentBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setReferenceSetName(String) - Method in interface nxopen.assemblies.DesignElementBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setReferenceSetName(String) - Method in interface nxopen.shapesearch.ShapeSearchBuilder

License requirements: shape_search ("Shape Search")
.

setReferenceSetOverride(boolean) - Method in interface nxopen.LoadOptions

Sets the option that specifies if the default reference set list should be applied to components all the way down an assembly tree.

setReferenceSets(PocketBuilder.RsetType) - Method in interface nxopen.tooling.PocketBuilder

License requirements: None.

setReferenceSheetSpacingMethod(WeldPointSpacingMethod) - Method in interface nxopen.weld.WeldPointBuilder

Sets the refsheet spacing method
License requirements: ugweld ("UG WELD")
.

setReferenceSheetType(JointmarkBuilder.ReferenceSheetTypes) - Method in interface nxopen.weld.JointmarkBuilder

License requirements: ugweld ("UG WELD")
.

setReferenceSheetType(WeldPointReferenceSheetType) - Method in interface nxopen.weld.WeldPointBuilder

Sets the type of sheet to create to place weld points on.

setReferenceSolution(SimSolution) - Method in interface nxopen.cae.CorrelSolutionBuilder

License requirements: nx_correl_base ("FE Correlation")
.

setReferenceStatus(Tag, Tag, UFSket.ReferenceStatus) - Method in interface nxopen.uf.UFSket

Refer to UF_SKET_set_reference_status for documentation.

setReferenceStockFromObject(NXObject) - Method in interface nxopen.routing.StockCollection

Sets the reference Stock information based on the Stock associated with this object.

setReferencesToReuse(Feature, NXObject[]) - Method in interface nxopen.features.MirrorBuilder

Sets the references or selections from the input features which are to be reused for mirror.

setReferencesToReuse(Feature, NXObject[]) - Method in interface nxopen.features.PatternFeatureBuilder

Sets the references or selections from the input features which are to be reused for all instances.

setReferenceStringUserAttribute(Tag, String, int, String, boolean) - Method in interface nxopen.uf.UFAttr

Refer to UF_ATTR_set_reference_string_user_attribute for documentation.

setReferenceSymbolCustomText(String) - Method in interface nxopen.annotations.PartsListBuilder

License requirements: None.

setReferenceSymbolText(PartsListBuilder.PartsListReferenceSymbolText) - Method in interface nxopen.annotations.PartsListBuilder

License requirements: None.

setReferenceTool(Tool) - Method in interface nxopen.cam.MillOperationBuilder

License requirements: None.

setReferenceToolDiameter(double) - Method in interface nxopen.cam.DriveMode

License requirements: None.

setReferenceToShow(ReferenceShowTypes) - Method in interface nxopen.drawings.ViewDetailLabelBuilder

License requirements: drafting ("DRAFTING")
.

setReferenceToShow(ReferenceShowTypes) - Method in interface nxopen.drawings.ViewLabelBuilder

License requirements: drafting ("DRAFTING")
.

setReferenceToShow(ReferenceShowTypes) - Method in interface nxopen.drawings.ViewSectionLabelBuilder

License requirements: drafting ("DRAFTING")
.

setReferenceType(boolean) - Method in interface nxopen.AttributePropertiesBaseBuilder

License requirements: None.

setReferenceType(LaminateDynamicEventBuilder.ReferenceTypeEnum) - Method in interface nxopen.cae.LaminateDynamicEventBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setReferenceType(ToolPathTiltTilting.ReferenceTypes) - Method in interface nxopen.cam.ToolPathTiltTilting

License requirements: None.

setReferenceType(IgesCreator.CsysrefEnum) - Method in interface nxopen.IgesCreator

License requirements: None.

setReferenceUserDefinedDirection(Direction) - Method in interface nxopen.cae.responsesimulation.CsdEvaluationSettingBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setReferenceUsingUserDefinedDirection(NodalFunctionEvalRequest) - Method in interface nxopen.cae.responsesimulation.CsdEvaluationSettingBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setReferenceValue(double) - Method in interface nxopen.cae.optimization.TBSSingleObjective

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setReferenceVector(Direction) - Method in interface nxopen.cae.UserDefinedSolidBeamSectionBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setReferenceVector(Direction) - Method in interface nxopen.cam.NCAssistantBuilder

License requirements: cam_base ("CAM BASE")
.

setReferenceVector(ILocation) - Method in interface nxopen.die.PierceItemBuilder

Sets the reference direction of the hole
License requirements: die_engineering ("DIE ENGINEERING")
.

setReferenceVector(Direction) - Method in interface nxopen.features.GuidedExtensionBuilderEx

License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setReferenceVector(Direction) - Method in interface nxopen.features.SilhouetteFlangeBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setReferenceVector(Direction) - Method in interface nxopen.formboard.OrientBranchBuilder

License requirements: routing_harness ("Routing Harness")
.

setReferenceVector(Direction) - Method in interface nxopen.geometricutilities.StyledSweepReferenceMethodBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setReferenceVector(Direction) - Method in interface nxopen.routing.AlignStockBuilder

License requirements: routing_base ("Routing Basic")
.

setReferenceVertex(Point3d) - Method in interface nxopen.features.sheetmetal.FlatPatternBuilder

Sets the end of the edge where the tangent will define the x axis for flat as solid.

setReferenceVertex(Point3d) - Method in interface nxopen.features.sheetmetal.FlatSolidBuilder

Sets the end of the edge where the tangent will define the x axis for flat as solid.

setReferPart(boolean) - Method in interface nxopen.tooling.ElectrodeComponentBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setRefFaces(ScCollector) - Method in interface nxopen.features.sheetmetal.AeroFlangeBuilder

License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setRefitDirection(RefitControlBuilder.RefitControlDirection) - Method in interface nxopen.geometricutilities.RefitControlBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setRefitMethod(RefitControlBuilder.RefitControlMethod) - Method in interface nxopen.geometricutilities.RefitControlBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setReflectAccuracy(int) - Method in interface nxopen.features.vehicledesign.ReflectionDataBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setReflectData(boolean) - Method in interface nxopen.features.vehicledesign.ReflectionDataBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setReflectionLocked(boolean) - Method in interface nxopen.geometricanalysis.HighlightLinesAnalysisBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setReflectionMap(Reflection.Type) - Method in interface nxopen.display.Reflection

License requirements: None.

setReflectivity(double) - Method in interface nxopen.display.EnvironmentBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setReflectivity(double) - Method in interface nxopen.display.Wall

License requirements: None.

setReflectivityType(DecalBuilder.DecalReflectivities) - Method in interface nxopen.display.DecalBuilder

License requirements: None.

setReflectivityValue(double) - Method in interface nxopen.display.TrueShadingBuilder

License requirements: None.

setReflectTraceCurve(boolean) - Method in interface nxopen.features.vehicledesign.ReflectionDataBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setRefObjectType1(StepBuilder.ReferenceBoundaryTypes) - Method in interface nxopen.features.StepBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setRefObjectType2(StepBuilder.ReferenceBoundaryTypes) - Method in interface nxopen.features.StepBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setRefPlyId(int) - Method in interface nxopen.cae.LaminateMatOrientationBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setRefPoint(Point) - Method in interface nxopen.die.AddSurfBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setRefractData(boolean) - Method in interface nxopen.features.vehicledesign.ReflectionDataBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setRefractionIndex(double) - Method in interface nxopen.features.vehicledesign.ReflectionDataBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setRefractTraceCurve(boolean) - Method in interface nxopen.features.vehicledesign.ReflectionDataBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setRefreshBeforeDisplayFlag(boolean) - Method in interface nxopen.cam.OperationDisplayOptionsBuilder

License requirements: cam_base ("CAM BASE")
.

setRefreshPrecision(double) - Method in interface nxopen.mechatronics.PreferencesBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setRefSetByCset(Tag, String) - Method in interface nxopen.uf.UFAssem

Refer to UF_ASSEM_set_ref_set_by_cset for documentation.

setRefSetNames(String[]) - Method in interface nxopen.LinkedMirrorPartBuilder

Sets the names of the reference sets that are selected for mirroring
License requirements: solid_modeling ("SOLIDS MODELING")
.

setRefType(LaserLinearMove.RefTypes) - Method in interface nxopen.cam.LaserLinearMove

License requirements: cam_base ("CAM BASE")
.

setRefType1(ShelfBuilder.ReferenceType) - Method in interface nxopen.features.ShelfBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setRefType2(ShelfBuilder.ReferenceType) - Method in interface nxopen.features.ShelfBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setRegion(DrawingRegion) - Method in interface nxopen.drawings.RemoveObjectsBuilder

Set the region
License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setRegion(int[], int[]) - Method in interface nxopen.gateway.ImageCaptureBuilder

Sets the region
License requirements: drafting ("DRAFTING")
.

setRegionAssignToRegionOption(MWMoldedPartValidationBuilder.AssignToRegion) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setRegionBandBottomNumber(int) - Method in interface nxopen.cam.CutBand

License requirements: None.

setRegionBandTopNumber(int) - Method in interface nxopen.cam.CutBand

License requirements: None.

setRegionBoundaryColor(NXColor) - Method in interface nxopen.annotations.PmiPreferences

Sets the region boundary color
License requirements: None.

setRegionBoundaryFont(int) - Method in interface nxopen.annotations.PmiPreferences

Sets the region boundary font
License requirements: None.

setRegionBoundaryWidth(int) - Method in interface nxopen.annotations.PmiPreferences

Sets the region boundary width
License requirements: None.

setRegionBounds(DirectionOption, IProfile[]) - Method in interface nxopen.die.FillBuilder

Sets the region bounds of the area fill
License requirements: die_engineering ("DIE ENGINEERING")
.

setRegionBounds(DirectionOption, IProfile[]) - Method in interface nxopen.die.FlangeTaskBuilder

Sets the region bounds of the flange task
License requirements: die_engineering ("DIE ENGINEERING")
.

setRegionBounds(DirectionOption, IProfile[]) - Method in interface nxopen.die.FormTaskBuilder

Sets the region bounds of the form task.

setRegionCavityRegionColor(NXColor) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setRegionCavityRegionTranslucency(int) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setRegionColor(NXColor) - Method in interface nxopen.drafting.AutomationPreferencesBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setRegionConnection(boolean) - Method in interface nxopen.cam.DmBndBuilder

License requirements: None.

setRegionConnection(boolean) - Method in interface nxopen.cam.MillCutParameters

License requirements: cam_base ("CAM BASE")
.

setRegionCoreRegionColor(NXColor) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setRegionCoreRegionTranslucency(int) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setRegionFont(PartDrafting.FontType) - Method in interface nxopen.drafting.AutomationPreferencesBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setRegionIndex(int[]) - Method in interface nxopen.features.shipdesign.PlateSystemBuilder

Sets the region index.

setRegionMachining(RoughFinishTurningBuilder.RegionMachiningTypes) - Method in interface nxopen.cam.RoughFinishTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setRegionMethod(int) - Method in interface nxopen.cam.WedmBasedGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setRegionMethod(int) - Method in interface nxopen.cam.WedmGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setRegionMethod(int) - Method in interface nxopen.cam.WedmOperationBuilder

License requirements: cam_base ("CAM BASE")
.

setRegionOption(PlateBuilder.RegionOptions) - Method in interface nxopen.features.shipdesign.PlateBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setRegionOption(EnlargeSurfaceBuilder.KeepDiscardOption) - Method in interface nxopen.tooling.EnlargeSurfaceBuilder

License requirements: None.

setRegionParameters(double, boolean, double, double) - Method in interface nxopen.uf.UFGdt

Refer to UF_GDT_set_region_parameters for documentation.

setRegionPickPoint(Point3d) - Method in interface nxopen.features.SnipSurfaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setRegionPoint(Point) - Method in interface nxopen.die.TrimLineDevelopmentBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setRegionPoint(Point3d) - Method in interface nxopen.features.shipdesign.PlateBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setRegionPoints(Point3d[]) - Method in interface nxopen.features.shipdesign.PlateSystemBuilder

Set the points derived from the regions of the sheet, that has the inscribed boundaries, to keep for the final plate system shape.

setRegions(CaeRegion[]) - Method in interface nxopen.cae.ImportSimulationBuilder

Set regions to import
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setRegions(EmbossRegion[]) - Method in interface nxopen.features.EmbossBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setRegionSelectCrossoverRegionFaces(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setRegionSelectCrossoverVerticalFaces(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setRegionSelection(RoughFinishTurningBuilder.RegionSelectionTypes) - Method in interface nxopen.cam.RoughFinishTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setRegionSelectionPoint(Point) - Method in interface nxopen.cam.RoughFinishTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setRegionSelectUnknownFaces(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setRegionSequencing(CutParametersRegionSequencingTypes) - Method in interface nxopen.cam.MillCutParameters

License requirements: cam_base ("CAM BASE")
.

setRegionShowIncompleteLoops(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setRegionShowInternalLoops(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setRegionShowPartingEdges(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setRegionStartAngle(double) - Method in interface nxopen.cam.NcmHoleMachining

License requirements: cam_base ("CAM BASE")
.

setRegionStartPoints(Point[]) - Method in interface nxopen.cam.NcmSubopBuilder

Sets region start points
License requirements: cam_base ("CAM BASE")
.

setRegionToDeform(Section) - Method in interface nxopen.features.GlobalShapingBuilder

License requirements: None.

setRegionType(int) - Method in interface nxopen.features.RegionListItemBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setRegionType(TrimRegionBuilder.RegionOption) - Method in interface nxopen.tooling.TrimRegionBuilder

License requirements: None.

setRegionUndefinedRegionColor(NXColor) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder

License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setRegionWidth(PartDrafting.WidthType) - Method in interface nxopen.drafting.AutomationPreferencesBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setReinforcementDirection(StandardPartItemBuilder.Direction) - Method in interface nxopen.features.shipdesign.BracketBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setReinforcementType(DuctReinforcementBuilder.ReinforcementTypes) - Method in interface nxopen.routing.DuctReinforcementBuilder

License requirements: routing_hvac ("Routing HVAC")
.

setRelabelOption(LaminateRelabelPliesBuilder.RelabelOptionEnum) - Method in interface nxopen.cae.LaminateRelabelPliesBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setRelatedParts(NXObject[]) - Method in interface nxopen.issue.IssueList

Sets the related parts of IssueList
License requirements: nx_issue_mgmt ("NX Issue Tracking")

Created in NX9.0.0

setRelatingInterfaceTerminal(InterfaceTerminalShadow) - Method in interface nxopen.routing.InterfaceTerminalRelationshipBase

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setRelatingSingleDevice(SingleDevice) - Method in interface nxopen.routing.DeviceRelationship

Sets the one Relating SingleDevice .

setRelation(CGMBuilder.RelationOption) - Method in interface nxopen.CGMBuilder

License requirements: None.

setRelation(PrintPDFBuilder.RelationOption) - Method in interface nxopen.PrintPDFBuilder

License requirements: None.

setRelationalOperatorOption(RequirementBuilder.RelationalOperatorOptions) - Method in interface nxopen.validate.RequirementBuilder

License requirements: None.

setRelationalOperatorOptionOnMaximumValue(RequirementBuilder.RelationalOperatorOptions) - Method in interface nxopen.validate.RequirementBuilder

License requirements: None.

setRelationalOperatorOptionOnMinimumValue(RequirementBuilder.RelationalOperatorOptions) - Method in interface nxopen.validate.RequirementBuilder

License requirements: None.

setRelationScope(int) - Method in interface nxopen.features.CurveFinderBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setRelationScope(int) - Method in interface nxopen.features.FaceRecognitionBuilder

License requirements: gateway ("UG GATEWAY")
.

setRelationshipType(DeviceRelationship.RelationType) - Method in interface nxopen.routing.DeviceRelationship

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setRelationshipType(InterfaceTerminalRelationshipBase.RelationType) - Method in interface nxopen.routing.InterfaceTerminalRelationshipBase

Sets the type of the InterfaceTerminalRelationshipBase object.

setRelationType(MarkAsTemplateBuilder.RelationTypeEnum) - Method in interface nxopen.drawings.MarkAsTemplateBuilder

License requirements: drafting ("DRAFTING")
.

setRelationType(String) - Method in interface nxopen.FileNew

License requirements: None.

setRelative(boolean) - Method in interface nxopen.cae.responsesimulation.PrlResultsEvaluationSettingBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setRelativeConvergence(double) - Method in interface nxopen.cae.optimization.DAOStopCondition

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setRelativeConvergenceCriteria(double) - Method in interface nxopen.optimization.OptimizationBuilder

License requirements: None.

setRelativeDateString(String) - Method in interface nxopen.visualreporting.SpecifyDateBuilder

License requirements: None.

setRelativeEndBlendEndPoint(double) - Method in interface nxopen.features.AestheticFaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setRelativeEndBlendStartPoint(double) - Method in interface nxopen.features.AestheticFaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setRelativeLinks(DisplayableObject[]) - Method in interface nxopen.motion.PackagingInterferenceBuilder

Sets PackagingInterference user selected relative links.

setRelativeLinks(DisplayableObject[]) - Method in interface nxopen.motion.PackagingTraceBuilder

Sets PackagingTrace relative links.

setRelativeLocation(HoleTableSettingsLabelBuilder.RelativeLocationType) - Method in interface nxopen.annotations.HoleTableSettingsLabelBuilder

License requirements: drafting ("DRAFTING")
.

setRelativeMotion(boolean) - Method in interface nxopen.tooling.MotionSimulationBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setRelativeNode(FENode) - Method in interface nxopen.cae.responsesimulation.NodalFunctionEvaluationSettingBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setRelativeStartBlendEndPoint(double) - Method in interface nxopen.features.AestheticFaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setRelativeStartBlendStartPoint(double) - Method in interface nxopen.features.AestheticFaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setRelief(boolean) - Method in interface nxopen.die.PadChildBuilder

Sets the relief switch of the die pad, if true the relief will be built around the pad, if false it will not.

setRelief(boolean) - Method in interface nxopen.die.PadParentBuilder

Sets the relief switch of die pads, if true the relief will be built around the pads, if false they will not.

setReliefAngle(double) - Method in interface nxopen.die.DrawDiePunchSectionBuilder

License requirements: ug_die_design ("Die Design")
.

setReliefAngle(String) - Method in interface nxopen.die.SteelInsertSectionBuilder

License requirements: ug_die_design ("Die Design")
.

setReliefAngle(String) - Method in interface nxopen.die.SteelInsertSegmentChildBuilder

License requirements: ug_die_design ("Die Design")
.

setReliefAngle(String) - Method in interface nxopen.die.SteelInsertSegmentParentBuilder

License requirements: ug_die_design ("Die Design")
.

setReliefAngle(double) - Method in interface nxopen.tooling.DieDesDrawPunchBuilder

License requirements: ug_die_design ("Die Design")
.

setReliefAngleType(TurnToolBuilder.ReliefAngleTypes) - Method in interface nxopen.cam.TurnToolBuilder

License requirements: None.

setReliefAttributes(String, String, int) - Method in interface nxopen.die.PadChildBuilder

Sets the relief attributes, note existance of attributes depends on usage in main feature.

setReliefAttributes(String, String, int) - Method in interface nxopen.die.PadParentBuilder

Sets the relief attributes, note existance of attributes depends on usage in main feature.

setReliefAttributes(String, String, int) - Method in interface nxopen.die.WearPlateLocChildBuilder

Sets the relief attributes
License requirements: ug_die_design ("Die Design")
.

setReliefAttributes(String, String, int) - Method in interface nxopen.die.WearPlateLocParentBuilder

Sets the relief attributes
License requirements: ug_die_design ("Die Design")
.

setReliefChamferEnabled(boolean) - Method in interface nxopen.features.HolePackageBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setReliefChamferEnabled(boolean) - Method in interface nxopen.geometricutilities.EndHoleData

License requirements: solid_modeling ("SOLIDS MODELING")
.

setReliefDepth(double) - Method in interface nxopen.die.CastReliefParentBuilder

Sets the relief depth of cast relief.

setReliefDepth(double) - Method in interface nxopen.die.PadChildBuilder

Sets the relief depth of the die pad.

setReliefDepth(double) - Method in interface nxopen.die.PadParentBuilder

Sets the relief depth of die pads.

setReliefDistance(double) - Method in interface nxopen.die.DrawDiePunchSectionBuilder

License requirements: ug_die_design ("Die Design")
.

setReliefDistance(double) - Method in interface nxopen.tooling.DieDesDrawPunchBuilder

License requirements: ug_die_design ("Die Design")
.

setReliefEnabled(boolean) - Method in interface nxopen.geometricutilities.StartHoleData

License requirements: solid_modeling ("SOLIDS MODELING")
.

setReliefPlungeDistance(double) - Method in interface nxopen.cam.TurnGrooveCornerControl

License requirements: cam_base ("CAM BASE")
.

setReliefPlungeOffset(double) - Method in interface nxopen.cam.TurnGrooveCornerControl

License requirements: cam_base ("CAM BASE")
.

setReliefPlungeType(TurnGrooveCornerControl.ReliefPlungeTypes) - Method in interface nxopen.cam.TurnGrooveCornerControl

License requirements: cam_base ("CAM BASE")
.

setReliefSheet(Body) - Method in interface nxopen.die.CastReliefParentBuilder

Sets the relief sheet of cast relief.

setReliefWidth(double) - Method in interface nxopen.die.PadChildBuilder

Sets the relief width of the die pad.

setReliefWidth(double) - Method in interface nxopen.die.PadParentBuilder

Sets the relief width of die pads.

setRelinkCategory(RelinkerBuilder.LinkCategory) - Method in interface nxopen.assemblies.RelinkerBuilder

License requirements: wave ("WAVE FUNCTIONALITY")
.

setRelinkOption(RelinkerBuilder.LinkOption) - Method in interface nxopen.assemblies.RelinkerBuilder

License requirements: wave ("WAVE FUNCTIONALITY")
.

setRelinkType(RelinkerBuilder.LinkType) - Method in interface nxopen.assemblies.RelinkerBuilder

License requirements: wave ("WAVE FUNCTIONALITY")
.

setRelocateParameters(boolean) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setRememberComponentState(boolean) - Method in interface nxopen.positioning.ComponentConstraintGroup

Sets the state which indicates if defining components are remembered when updating the member constraints.

setRememberComponentState(boolean) - Method in interface nxopen.positioning.ComponentConstraintGroupBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setRemoteRenderFormat(IRayPlusStudioEditorBuilder.IRayPlusStudioRemoteRenderFormatType) - Method in interface nxopen.display.IRayPlusStudioEditorBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setRemoteRenderIP(String) - Method in interface nxopen.display.IRayPlusStudioEditorBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setRemoteRenderSecurityToken(String) - Method in interface nxopen.display.IRayPlusStudioEditorBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setRemoteRenderToggle(boolean) - Method in interface nxopen.display.IRayPlusStudioEditorBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setRemoteRenderType(IRayPlusStudioEditorBuilder.IRayPlusStudioRemoteRenderType) - Method in interface nxopen.display.IRayPlusStudioEditorBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setRemoteRenderVideoMode(IRayPlusStudioEditorBuilder.IRayPlusStudioRemoteRenderVideoType) - Method in interface nxopen.display.IRayPlusStudioEditorBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setRemoveBlends(boolean) - Method in interface nxopen.features.shipdesign.PlateDivideBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setRemoveBlends(boolean) - Method in interface nxopen.features.shipdesign.ShipPreparationBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setRemoveBlends(boolean) - Method in interface nxopen.features.shipdesign.ShipPreparationInfo

License requirements: nx_ship_basic ("Ship Basic Design")
.

setRemoveBoundary(boolean) - Method in interface nxopen.geometricutilities.LocalUntrimBuilder

License requirements: nx_freeform_1 ("basic freeform modeling") OR nx_freeform_2 ("advanced freeform modeling")
.

setRemovedFacesCollector(ScCollector) - Method in interface nxopen.features.ShellBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setRemoveDiscontinuity(boolean) - Method in interface nxopen.preferences.SessionNXGateway

Sets the remove discontinuity flag.

setRemoveExistingStock(boolean) - Method in interface nxopen.routing.FillerStockBuilder

Sets the remove existing stock flag.

setRemoveExistingStock(boolean) - Method in interface nxopen.routing.StockBuilder

Sets the remove existing stock flag.

setRemoveFilter(ScrapDesignBuilder.RemoveType) - Method in interface nxopen.tooling.ScrapDesignBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setRemoveGashes(boolean) - Method in interface nxopen.features.ThickenBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setRemoveHoles(boolean) - Method in interface nxopen.features.sheetmetal.MetaformBuilder

License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setRemoveLimitPoints(boolean) - Method in interface nxopen.die.DieLimitsBuilder

License requirements: None.

setRemoveLoops(boolean) - Method in interface nxopen.die.TrimLineDevelopmentBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setRemoveOpenings(boolean) - Method in interface nxopen.features.shipdesign.PlateDivideBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setRemoveOpenings(boolean) - Method in interface nxopen.features.shipdesign.ShipPreparationBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setRemoveOpenings(boolean) - Method in interface nxopen.features.shipdesign.ShipPreparationInfo

License requirements: nx_ship_basic ("Ship Basic Design")
.

setRemoveParameter(boolean) - Method in interface nxopen.tooling.ReplaceSolidBuilder

License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setRemoveParameter(boolean) - Method in interface nxopen.tooling.TrimSolidBuilder

License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setRemoveProblemVerticesOption(boolean) - Method in interface nxopen.features.OffsetSurfaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setRemoveSelfIntersection(boolean) - Method in interface nxopen.features.EdgeBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setRemoveSelfIntersections(boolean) - Method in interface nxopen.features.AOCSBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.

setRemoveSelfIntersections(boolean) - Method in interface nxopen.features.FaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setRemoveSelfIntersections(boolean) - Method in interface nxopen.preferences.SessionNXGateway

Sets the remove self intersection flag.

setRemoveSmallEdges(boolean) - Method in interface nxopen.preferences.SessionNXGateway

Sets the remove small edges flag.

setReName(boolean) - Method in interface nxopen.tooling.BendInsertDesignBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setRename(boolean) - Method in interface nxopen.tooling.DieBaseBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setRename(boolean) - Method in interface nxopen.tooling.ElectrodeBlankBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setRename(boolean) - Method in interface nxopen.tooling.ElectrodeComponentBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setRename(boolean) - Method in interface nxopen.tooling.ElectrodeCopyBuilder

License requirements: None.

setRename(boolean) - Method in interface nxopen.tooling.ElectrodeInitializationBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setRename(boolean) - Method in interface nxopen.tooling.InitProjectBuilder

License requirements: None.

setRename(boolean) - Method in interface nxopen.tooling.MoldFillingBuilder

License requirements: ug_mold_design ("UG MOLD")
.

setRename(boolean) - Method in interface nxopen.tooling.MoldInsertBuilder

License requirements: None.

setRename(boolean) - Method in interface nxopen.tooling.MoldProcessBuilder

License requirements: None.

setRename(boolean) - Method in interface nxopen.tooling.SubInsertBuilder

License requirements: None.

setRenameComponent(boolean) - Method in interface nxopen.tooling.BurringInsertBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setRenameComponent(boolean) - Method in interface nxopen.tooling.ChangeoverManagementBuilder

License requirements: None.

setRenameComponent(boolean) - Method in interface nxopen.tooling.EjectorTableBuilder

License requirements: ug_mold_design ("UG MOLD")
.

setRenameComponent(boolean) - Method in interface nxopen.tooling.EWDraftingBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setRenameComponent(boolean) - Method in interface nxopen.tooling.FormingInsertBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setRenameComponent(boolean) - Method in interface nxopen.tooling.SpecialFormingBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setRenameComponent(boolean) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setRenameComponentPartToggle(boolean) - Method in interface nxopen.tooling.MWDefineSheetsBuilder

License requirements: None.

setRenameComponents(boolean) - Method in interface nxopen.tooling.MotionSimulationBuilder

License requirements: None.

setRenameComponents(boolean) - Method in interface nxopen.tooling.StandardPartBuilder

License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setRenameDialog(boolean) - Method in interface nxopen.tooling.DieInsertBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setRenameDiaTog(boolean) - Method in interface nxopen.tooling.InitProjBuilder

License requirements: None.

setRenameRule(String) - Method in interface nxopen.tooling.MotionSimulationBuilder

Deprecated.

Deprecated in NX10.0.0. This functionality is no longer supported.

setRenameToggle(boolean) - Method in interface nxopen.tooling.ShimBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setRenderCount(int) - Method in interface nxopen.drawings.GeneralViewStyle

Sets the render count.

setRenderingStyle(ShadingRenderingStyleOption) - Method in interface nxopen.drawings.ShadingViewStyle

Sets the rendering style.

setRenderingStyle(ViewSettingsBuilder.RenderingStyleEnum) - Method in interface nxopen.drawings.ViewSettingsBuilder

License requirements: convert_to_pmi (" Convert To PMI"), drafting ("DRAFTING")
.

setRenderingStyle(ShadingRenderingStyleOption) - Method in interface nxopen.drawings.ViewStyleShadingBuilder

License requirements: drafting ("DRAFTING")
.

setRenderingStyle(ShadingRenderingStyleOption) - Method in interface nxopen.preferences.ShadingViewPreferences

Sets the rendering style.

setRenderingStyle(View.RenderingStyleType) - Method in interface nxopen.View

Sets the rendering style of the view.

setRenderMethodType(TrueStudioBuilder.RenderMethod) - Method in interface nxopen.display.TrueStudioBuilder

License requirements: None.

setRenderSet(RenderSet[]) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder

Sets the render sets on the GENERAL tab of the View Style Dialog
License requirements: drafting ("DRAFTING")
.

setRenderSetObjects(Tag, int, Tag[]) - Method in interface nxopen.uf.UFDraw

Refer to UF_DRAW_set_render_set_objects for documentation.

setRenderSetParms(Tag, UFDraw.RenderPrefs) - Method in interface nxopen.uf.UFDraw

Refer to UF_DRAW_set_render_set_parms for documentation.

setRenderSetsForView(Tag, int, Tag[]) - Method in interface nxopen.uf.UFDraw

Refer to UF_DRAW_set_render_sets_for_view for documentation.

setRenderSolidsUsingStoredFacets(boolean) - Method in interface nxopen.preferences.SessionVisualizationPerformance

License requirements: None.

setRenderTrueHiddenLine(boolean) - Method in interface nxopen.drawings.CustomViewSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setRenderTrueHiddenLine(boolean) - Method in interface nxopen.drawings.ThreadsViewStyle

Sets the status of render true hidden line
License requirements: drafting ("DRAFTING")
.

setRenderTrueHiddenLine(boolean) - Method in interface nxopen.preferences.ThreadsViewPreferences

Sets the status of render true hidden line
License requirements: drafting ("DRAFTING")
.

setRenumberMethod(BcLabelManagerBuilder.RenumberType) - Method in interface nxopen.cae.BcLabelManagerBuilder

License requirements: None.

setRenumberStartValue(int) - Method in interface nxopen.cae.BcLabelManagerBuilder

License requirements: None.

setReorderObserver(SetList.ReorderCallback) - Method in interface nxopen.blockstyler.SetList

Sets the Reorder observer.

setReorientProperties(boolean) - Method in interface nxopen.tooling.DieEngLineupBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setReorientToolHolder(boolean) - Method in interface nxopen.cam.TurningOperationBuilder

License requirements: cam_base ("CAM BASE")
.

setReorientToolHolder(boolean) - Method in interface nxopen.cam.TurnToolProbingBuilder

License requirements: cam_base ("CAM BASE")
.

setRepairingOption(DraftBodyBuilder.RepairOption) - Method in interface nxopen.features.DraftBodyBuilder

Deprecated.

Deprecated in NX9.0.0. Use DraftBodyBuilder.setRepairPartingEdge(nxopen.features.DraftBodyBuilder.RepairingPartingEdgeOption) instead

setRepairPartingEdge(DraftBodyBuilder.RepairingPartingEdgeOption) - Method in interface nxopen.features.DraftBodyBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setRepairTolerance(double) - Method in interface nxopen.preferences.SessionNXGateway

Sets the repair tolerance.

setReparentFrecsReferencingSeamedObject(boolean) - Method in interface nxopen.features.shipdesign.SeamBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setRepeatTransformSetting(boolean) - Method in interface nxopen.geometricutilities.PatternOrientation

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setRepetition(int) - Method in interface nxopen.drawings.BrokenViewBuilder

License requirements: None.

setReplaceAll(boolean) - Method in interface nxopen.annotations.ReplaceSymbolBuilder

License requirements: drafting ("DRAFTING")
.

setReplaceAll(boolean) - Method in interface nxopen.layout2d.ReplaceComponentBuilder

License requirements: nx_layout ("NX Layout")
.

setReplaceAllComponents(boolean) - Method in interface nxopen.pdm.PartOperationBuilder

Deprecated.

Deprecated in NX10.0.0. Use PartOperationCopyBuilder.setReplaceAllComponentsInSession(boolean) instead

setReplaceAllComponentsInSession(boolean) - Method in interface nxopen.pdm.PartOperationCopyBuilder

License requirements: None.

setReplaceAllOccurrences(boolean) - Method in interface nxopen.assemblies.ReplaceComponentBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setReplaceChannel(boolean) - Method in interface nxopen.sim.KinematicImportMcfBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setReplacementCode(NXObject) - Method in interface nxopen.mechatronics.RuntimeBehaviorBuilder

Sets byte code for replacement
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setReplacementPart(String) - Method in interface nxopen.assemblies.ReplaceComponentBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setReplacementStatus(boolean) - Method in interface nxopen.mechatronics.ReplacePhysicsBuilder

Set the replacement status
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setReplaceString(String) - Method in interface nxopen.InterpartExpressionsBuilder

License requirements: None.

setReplaceString(String) - Method in interface nxopen.ReplaceExpressionsBuilder

License requirements: None.

setReplaceTemplate(Part) - Method in interface nxopen.tooling.AddReusablePart

Sets the replace template part
License requirements: None.

setReplaceWith(SinumerikCaSimplifyBodiesBuilder.ObjectToReplaceWithTypes) - Method in interface nxopen.sim.SinumerikCaSimplifyBodiesBuilder

License requirements: nx_isv_mtb ("Machine Tool Builder") OR nx_sinumerik_ca ("Sinumerik Collision Avoidance")
.

setReplaceWithStr(String) - Method in interface nxopen.pdm.PartOperationImportBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setReplayRefreshBeforeEachPath(boolean) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setReplaySpeed(int) - Method in interface nxopen.cam.DisplayPath

License requirements: cam_base ("CAM BASE")
.

setReplaySpeed(int) - Method in interface nxopen.cam.OperationDisplayOptionsBuilder

License requirements: cam_base ("CAM BASE")
.

setReplayTimestampNumber(int) - Method in interface nxopen.features.FeatureReplayBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setReport(boolean) - Method in interface nxopen.features.OptimizeFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setReportContext(VisualReport.ReportContextOption) - Method in interface nxopen.visualreporting.VisualReport

License requirements: nx_visual_reporting ("Visual Reporting")
.

setReportContextOfVisualReport(VisualReport.ReportContextOption) - Method in interface nxopen.visualreporting.VisualReportBuilder

Deprecated.

Deprecated in NX9.0.3. Use VisualReport.setReportContext(nxopen.visualreporting.VisualReport.ReportContextOption) instead.

setReportDiscrepancies(boolean) - Method in interface nxopen.routing.CompareRunsBuilder

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setReportDisplayFlattenShape(boolean) - Method in interface nxopen.bodydes.OnestepUnformBuilder

License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setReportDisplaySpringback(boolean) - Method in interface nxopen.bodydes.OnestepUnformBuilder

License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setReportDisplayStrain(boolean) - Method in interface nxopen.bodydes.OnestepUnformBuilder

License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setReportDisplayStress(boolean) - Method in interface nxopen.bodydes.OnestepUnformBuilder

License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setReportDisplayThickness(boolean) - Method in interface nxopen.bodydes.OnestepUnformBuilder

License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setReportDisplayViewControl(boolean) - Method in interface nxopen.bodydes.OnestepUnformBuilder

License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setReportFileName(String) - Method in interface nxopen.cae.modelcheck.ModelSetupCheckBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setReportFilterObject(String) - Method in interface nxopen.cam.InspectionGraphicalReportBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setReportFilterStatus(TrackDrawingChangesReportFilterBuilder.Filter, boolean) - Method in interface nxopen.drawings.TrackDrawingChangesReportFilterBuilder

Sets report filter status
License requirements: drafting ("DRAFTING")
.

setReportFilterType(InspectionGraphicalReportBuilder.GraphicalReportFilterType) - Method in interface nxopen.cam.InspectionGraphicalReportBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setReportHeader(boolean) - Method in interface nxopen.cam.InspectionAnalyzeOutputBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setReportingCsys(InspectionAnalyzeOutputBuilder.ReportingCsysType) - Method in interface nxopen.cam.InspectionAnalyzeOutputBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setReportingDatatypeOfRule(Rule, Property.DatatypeOption) - Method in interface nxopen.visualreporting.VisualReportBuilder

Sets the Property.DatatypeOption of the active Classifier 's reporting Property in this Rule .

setReportingObjectType(VisualReport.ReportingObjectTypeOption) - Method in interface nxopen.visualreporting.VisualReport

License requirements: nx_visual_reporting ("Visual Reporting")
.

setReportingObjectTypeOfVisualReport(VisualReport.ReportingObjectTypeOption) - Method in interface nxopen.visualreporting.VisualReportBuilder

License requirements: None.

setReportingPerType(DeviationGaugeBuilder.ReportingPerTypes) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setReportingPropertyOfRule(Rule, Property) - Method in interface nxopen.visualreporting.VisualReportBuilder

Sets the reporting Property for the active Classifier in this Rule .

setReportingStyle(VisualReport.ReportingStyleOption) - Method in interface nxopen.visualreporting.VisualReport

License requirements: nx_visual_reporting ("Visual Reporting")
.

setReportingStyleOfVisualReport(VisualReport.ReportingStyleOption) - Method in interface nxopen.visualreporting.VisualReportBuilder

License requirements: None.

setReportMirrorResultXML(boolean) - Method in interface nxopen.features.shipdesign.MirrorShipStructureBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setReportMode(Tag, int) - Method in interface nxopen.uf.UFPlist

Deprecated.

The equivalent Open C method has retired

setReportName(String) - Method in interface nxopen.cam.InspectionGraphicalReportBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setReportNameOfVisualReport(String) - Method in interface nxopen.visualreporting.VisualReportBuilder

License requirements: None.

setReportPer(int) - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder

License requirements: gateway ("UG GATEWAY")
.

setReportRouteErrors(boolean) - Method in interface nxopen.preferences.RoutingElectrical

Sets the option to report auto/manual route errors to the listing window.

setReportTapHoleSizeForThreadedHoles(boolean) - Method in interface nxopen.annotations.HoleTableSettingsFormatBuilder

License requirements: drafting ("DRAFTING")
.

setReportTitle(String) - Method in interface nxopen.cam.InspectionGraphicalReportBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setRepositionFromCsys(CoordinateSystem) - Method in interface nxopen.cam.InspectionOperationTransformBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setRepositionFromCsys(CoordinateSystem) - Method in interface nxopen.cam.OperationTransformBuilder

License requirements: cam_base ("CAM BASE")
.

setRepositionGeometry(boolean) - Method in interface nxopen.drawings.ViewCopyTo3dBuilder

License requirements: nx_layout ("NX Layout")
.

setRepositionMethod(ChannelAdjustBuilder.VectorMethod) - Method in interface nxopen.tooling.ChannelAdjustBuilder

License requirements: None.

setRepositionMethod(LayoutRepositionBuilder.Method) - Method in interface nxopen.tooling.LayoutRepositionBuilder

License requirements: None.

setRepositionOption(AssyFEModel.RepositionType) - Method in interface nxopen.cae.AssyFEModel

Sets reposition update option
License requirements: nx_masterfem ("Finite Element Modeling")
.

setRepositionToCsys(CoordinateSystem) - Method in interface nxopen.cam.InspectionOperationTransformBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setRepositionToCsys(CoordinateSystem) - Method in interface nxopen.cam.OperationTransformBuilder

License requirements: cam_base ("CAM BASE")
.

setRepositionType(LayoutRepositionBuilder.Type) - Method in interface nxopen.tooling.LayoutRepositionBuilder

License requirements: None.

setReProjectCurvesOption(boolean) - Method in interface nxopen.features.VarsweepBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setRepToBaseFem() - Method in interface nxopen.cae.ModifiableFEModelOccAttribute

Set the representation type to base_fem
License requirements: nx_masterfem ("Finite Element Modeling")
.

setRepToSuperElement(String) - Method in interface nxopen.cae.ModifiableFEModelOccAttribute

Set the representation type to super element
License requirements: nx_masterfem ("Finite Element Modeling")
.

setRequest(GraphBuilder.RequestChoices) - Method in interface nxopen.motion.GraphBuilder

Deprecated.

Deprecated in NX11.0.0. Use Motion.GraphObjectBuilder instead.

setRequestDescription(String[]) - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder

Sets the description
License requirements: nx_penetration_mgmt ("Penetration Management")
.

setRequestName(String) - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder

License requirements: nx_penetration_mgmt ("Penetration Management")
.

setRequestType(PenetrationRequest.RequestType) - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder

License requirements: nx_penetration_mgmt ("Penetration Management")
.

setRequestType(OverrideBuilder.RequestTypes) - Method in interface nxopen.validate.OverrideBuilder

License requirements: ug_checkmate ("UG Check Mate")
.

setRequiredAttributes(CharacteristicList) - Method in interface nxopen.routing.WatertightFittingsBuilder

Set required attributes for Watertight Fittings.

setRequirement(String) - Method in interface nxopen.Validation

License requirements: None.

setRequirementData(FunctionObjectBuilder.RequirementData[]) - Method in interface nxopen.mechatronics.FunctionObjectBuilder

Deprecated.

Deprecated in NX8.5.0. Please use RequirementBuilder instead.

setRequirementDescription(String[]) - Method in interface nxopen.validate.RequirementBuilder

Sets the requirement description
License requirements: None.

setRequirementMode(MeasureBuilder.RequirementType) - Method in interface nxopen.MeasureBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setRequirementsControl(BumperPendulumBuilder.RequirementsControlType) - Method in interface nxopen.features.vehicledesign.BumperPendulumBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setRequirementsControl(CloseRangeVisibilityBuilder.RequirementsControlType) - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setRequirementsControl(CrashBarrierBuilder.RequirementsControlsControlType) - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setRequirementsControl(DynamicCurbBuilder.RequirementsControlType) - Method in interface nxopen.features.vehicledesign.DynamicCurbBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setRequirementsControl(GroundClearanceBuilder.RequirementControls) - Method in interface nxopen.features.vehicledesign.GroundClearanceBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setRequirementsControl(HeadImpactBuilder.RequirementsControlType) - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setRequirementsControl(InnerAngleBuilder.RequirementsControlType) - Method in interface nxopen.features.vehicledesign.InnerAngleBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setRequirementsControl(OilPanBuilder.RequirementsControlType) - Method in interface nxopen.features.vehicledesign.OilPanBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setRequirementsControl(SlopeBuilder.RequirementsControlType) - Method in interface nxopen.features.vehicledesign.SlopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setRequirementsControl(StaticCurbBuilder.RequirementsControlType) - Method in interface nxopen.features.vehicledesign.StaticCurbBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setRequirementsControl(WheelCoveringBuilder.RequirementsControlType) - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setRequirementsControl(WheelFixingBuilder.RequirementsControlType) - Method in interface nxopen.features.vehicledesign.WheelFixingBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setReselTargetData(boolean) - Method in interface nxopen.tooling.EnlargeSurfaceBuilder

License requirements: None.

setResetComponentDisplay(PartCleanup.ResetComponentDisplayAction) - Method in interface nxopen.PartCleanup

Sets the option that specifies whether to remove assembly-specific geometry in component parts.

setResetPosture() - Method in interface nxopen.features.HumanBuilder

Set flag for reset posture
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setResetSegment() - Method in interface nxopen.features.HumanBuilder

Set flag for reset segment
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setResistance(double) - Method in interface nxopen.motion.PMDCMotorBuilder

Deprecated.

Deprecated in NX8.5.0. Obtion the exression using PMDCMotorBuilder.resistanceExpression() to query or edit it.

setResize(boolean) - Method in interface nxopen.uistyler.DialogItem

Specifies wether dialog is allowed to resize
License requirements: None.

setResizeAllDirections(boolean) - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder

License requirements: None.

setResizedEndDistance(double) - Method in interface nxopen.features.DatumAxisBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setResizeDuringUpdate(boolean) - Method in interface nxopen.features.DatumPlaneBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setResizeDuringUpdate(boolean) - Method in interface nxopen.features.ResizePlaneBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setResizeHeightWithDialog(boolean) - Method in interface nxopen.blockstyler.ListBox

License requirements: None.

setResizeHeightWithDialog(boolean) - Method in interface nxopen.blockstyler.MultilineString

License requirements: None.

setResizeHeightWithDialog(boolean) - Method in interface nxopen.blockstyler.ScrolledWindow

License requirements: None.

setResizeHeightWithDialog(boolean) - Method in interface nxopen.blockstyler.SetList

License requirements: None.

setResizeMethod(PmiResizeMethod) - Method in interface nxopen.annotations.PmiPreferences

License requirements: None.

setResizeOnCreate(boolean) - Method in interface nxopen.annotations.PmiPreferences

License requirements: None.

setResizeOnViewSave(boolean) - Method in interface nxopen.annotations.PmiPreferences

License requirements: None.

setResizeRadius(boolean) - Method in interface nxopen.tooling.BendOperationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setResizeRadius(boolean) - Method in interface nxopen.tooling.DirectUnbendBuilder

License requirements: None.

setResolution(ViewCreationWizardBuilder.ResolutionOption) - Method in interface nxopen.drawings.ViewCreationWizardBuilder

License requirements: drafting ("DRAFTING")
.

setResolution(MultiPatchAlignmentBuilder.ResolutionType) - Method in interface nxopen.facet.MultiPatchAlignmentBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setResolution(ReflectionDataBuilder.ResolutionType) - Method in interface nxopen.features.vehicledesign.ReflectionDataBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setResolution(HighlightLinesAnalysisBuilder.Resolutions) - Method in interface nxopen.geometricanalysis.HighlightLinesAnalysisBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setResolution(PartVisualizationShade.AdvViewToleranceType) - Method in interface nxopen.geometricutilities.DisplayResolutionBuilder

License requirements: None.

setResolution(ListCreator.ResolutionType) - Method in interface nxopen.ListCreator

License requirements: None.

setResolution(SessionVisualizationHighQualityImage.ResolutionType, int) - Method in interface nxopen.preferences.SessionVisualizationHighQualityImage

Specifies the resolution to use when generating a High Quality Image.

setResolutionDeg(double) - Method in interface nxopen.sim.MachineToolConfiguration

Sets the degree resolution value
License requirements: None.

setResolutionDensityType(CfdLocalResolutionConstraintBuilder.ResolutionDensity) - Method in interface nxopen.cae.CfdLocalResolutionConstraintBuilder

License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")
.

setResolutionMm(double) - Method in interface nxopen.sim.MachineToolConfiguration

Sets the millimeter resolution value
License requirements: None.

setResolveOverlap(SimBcPlotContoursBuilder.ResolveOverlapType) - Method in interface nxopen.cae.SimBcPlotContoursBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setResolveOverlapValue(double) - Method in interface nxopen.cae.SimBcPlotContoursBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setResolveOverlapValueUnit(Unit) - Method in interface nxopen.cae.SimBcPlotContoursBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setResolveRule(ConflictResolutionBuilder.Rule) - Method in interface nxopen.cae.ConflictResolutionBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setResolveRule(ConstraintResolutionBuilder.Rule) - Method in interface nxopen.cae.ConstraintResolutionBuilder

Deprecated.

Deprecated in NX10.0.0. Use ConflictResolutionBuilder instead.

setResponse(String) - Method in interface nxopen.cae.AfuHeaderId

Sets the string to define response direction sense
License requirements: nx_ftk ("NX Advanced Graphing")
.

setResponse(Response) - Method in interface nxopen.cae.optimization.DAOConstraintBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setResponse(Response) - Method in interface nxopen.cae.optimization.DAOObjective

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setResponse(int) - Method in interface nxopen.features.UserDefinedFeatureEditEvent

License requirements: None.

setResponseCoordinateSystem(CoordinateSystem) - Method in interface nxopen.cae.responsesimulation.CsdEvaluationSettingBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setResponseDomainDefinitionOption(ResponseDomainDefinitionMethod) - Method in interface nxopen.cae.responsesimulation.ResponseResultsEvaluationSettingBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setResponseElementDataComponent(DirectionDataComponent) - Method in interface nxopen.cae.responsesimulation.CsdEvaluationSettingBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setResponseElements(FEElement[]) - Method in interface nxopen.cae.responsesimulation.CsdEvaluationSettingBuilder

Set the response elments.

setResponseId(int) - Method in interface nxopen.cae.AfuHeaderId

Sets the ID of response element or node
License requirements: nx_ftk ("NX Advanced Graphing")
.

setResponseNodeDataComponent(DirectionDataComponent) - Method in interface nxopen.cae.responsesimulation.CsdEvaluationSettingBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setResponseNodes(FENode[]) - Method in interface nxopen.cae.responsesimulation.CsdEvaluationSettingBuilder

Set the response nodes.

setResponseType(DDAMExcitation.ResponseType) - Method in interface nxopen.cae.responsesimulation.DDAMExcitationBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setResponseType(DDAMExcitation.ResponseType) - Method in interface nxopen.cae.responsesimulation.RSEventAttributes

License requirements: nx_response_anlys ("NX Response Analysis")
.

setResponseTypeOption(DDAMComponentData.ResponseType) - Method in interface nxopen.cae.responsesimulation.DDAMComponentData

License requirements: nx_response_anlys ("NX Response Analysis")
.

setResponseUserDefinedDirection(Direction) - Method in interface nxopen.cae.responsesimulation.CsdEvaluationSettingBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setResponseUsingUserDefinedDirection(NodalFunctionEvalRequest) - Method in interface nxopen.cae.responsesimulation.CsdEvaluationSettingBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setRespositionExisting(boolean) - Method in interface nxopen.annotations.BaseOrdinateDimensionBuilder

License requirements: drafting ("DRAFTING")
.

setRestartIDNumbersWithNewReport(boolean) - Method in interface nxopen.drawings.TrackDrawingChangesGeneralBuilder

License requirements: drafting ("DRAFTING")
.

setRestartNumbers(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use TrackDrawingChangesGeneralBuilder.setRestartIDNumbersWithNewReport(boolean) instead.

setRestitution(double) - Method in interface nxopen.mechatronics.PreferencesBuilder

Deprecated.

Deprecated in NX9.0.0. This functionality is no longer supported.

setRestitutionCoefficent(double) - Method in interface nxopen.motion.BodyContactAdams

Deprecated.

Deprecated in NX8.0.0. Obtion the exression using BodyContactAdams.restitutionCoefficentExpression() to query or edit it.

setRestoreOption(boolean) - Method in interface nxopen.features.PatternFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setRestorePosition(boolean) - Method in interface nxopen.tooling.BendOperationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setRestrictCrosshatch(boolean) - Method in interface nxopen.annotations.LightweightSectionBuilder

License requirements: geometric_tol ("GDT")
.

setRestrictCrosshatchAngle(boolean) - Method in interface nxopen.annotations.PmiPreferences

License requirements: None.

setRestrictCrosshatchAngle(boolean) - Method in interface nxopen.drawings.SectionViewStyle

Sets
License requirements: drafting ("DRAFTING")
.

setRestrictCrosshatchAngle(boolean) - Method in interface nxopen.drawings.ViewStyleSectionBuilder

License requirements: drafting ("DRAFTING")
.

setRestrictCrosshatchAngle(boolean) - Method in interface nxopen.preferences.SectionViewPreferences

Sets the status of restrict crosshatch angle.

setRestrictThicknessToMaterial(boolean) - Method in interface nxopen.features.shipdesign.PlateStockBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setResult(Result) - Method in interface nxopen.cae.CreateJtBuilder

The result
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setResult(Result) - Method in interface nxopen.cae.PostJtExportBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setResult(Result) - Method in interface nxopen.cae.ResultsModelExportBuilder

The result the model of which is to be exported
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setResult(Result, ResultParameters[], String[]) - Method in interface nxopen.cae.TransientResultsReductionBuilder

The result types
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setResultantCurveLocator(QueryCurveUsageOptions.ResultantCurveLocatorType) - Method in interface nxopen.cae.QueryCurveUsageOptions

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setResultantLocationTolerance(double) - Method in interface nxopen.cae.QueryCurveUsageOptions

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setResultBeamSection(Result.Section) - Method in interface nxopen.cae.ResultParameters

Set section where beam results are defined
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setResultBlankShape(double[]) - Method in interface nxopen.bodydes.OnestepUnformBuilder

Sets blank shape result.

setResultCategory(ComparisonResult.Category) - Method in interface nxopen.mechatronics.ComparisonResult

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setResultComponent(Result.Component) - Method in interface nxopen.cae.CrossSectionParameters

Set result component
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setResultComponent(Result.Component) - Method in interface nxopen.cae.ResultParameters

Set result component
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setResultDataLocation(Result.Location) - Method in interface nxopen.cae.ResultParameters

Deprecated.

Deprecated in NX8.0.0. Use ResultParameters.getGenericResultType() instead.

setResultDataQuantity(Result.Quantity) - Method in interface nxopen.cae.ResultParameters

Deprecated.

Deprecated in NX8.0.0. Use ResultParameters.getGenericResultType() instead.

setResultDataSection(Result.Section) - Method in interface nxopen.cae.ResultParameters

Deprecated.

Deprecated in NX8.0.0. Use ResultParameters.getGenericResultType() instead.

setResultFile(String) - Method in interface nxopen.cae.ImportedSolutionBuilder

The result file
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setResultFileFolder(String) - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setResultFileNames(String[]) - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder

Set all the result files of the analysis result.

setResultFileUnits(Unit[]) - Method in interface nxopen.cae.SimResultReference

Set result file units
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setResultFileUnits(Unit[]) - Method in interface nxopen.cae.SimSolution

Deprecated.

Deprecated in NX10.0.0. Use SimResultReference :SimSolution.setResultFileUnits(nxopen.Unit[]) instead.

setResultFilteringOption(TBSSmoothBuilder.ResultFiltering) - Method in interface nxopen.cae.optimization.TBSSmoothBuilder

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setResultMeasure(ResultMeasure) - Method in interface nxopen.cae.optimization.DAOConstraintBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setResultMeasure(ResultMeasure) - Method in interface nxopen.cae.optimization.DAOObjective

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setResultName(String) - Method in interface nxopen.mechatronics.MATLABSignalConnectionBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setResultName(String) - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setResultName(String) - Method in interface nxopen.mechatronics.SignalConnectionBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setResultNodesIdsOnProfile(int[]) - Method in interface nxopen.bodydes.OnestepUnformBuilder

Sets profile node ID result.

setResultNodesNumEachProfileCurve(int[]) - Method in interface nxopen.bodydes.OnestepUnformBuilder

Sets total number of node on each profile.

setResultOption(AxiSymmetricParameters.GetResult) - Method in interface nxopen.cae.AxiSymmetricParameters

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setResultOption(CyclicSymmetricParameters.GetResult) - Method in interface nxopen.cae.CyclicSymmetricParameters

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setResultProbes(ResultProbe[]) - Method in interface nxopen.cae.GraphFromResultProbeBuilder

The plot type will be set
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setResultReferenceType(SimResultReference.Type) - Method in interface nxopen.cae.ResultProbeBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setResultRefNodeId(int) - Method in interface nxopen.bodydes.OnestepUnformBuilder

Sets reference node ID.

setResults(Result[], ResultParameters[]) - Method in interface nxopen.cae.ResultsEnvelopeBuilder

The results
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setResults(int[], Result[], ResultParameters[]) - Method in interface nxopen.cae.ResultsEnvelopeBuilder

The results
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setResults(Result[], ResultParameters[], String[]) - Method in interface nxopen.cae.ResultsReductionBuilder

The result types
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setResults(UncutRegionsBuilder.ResultsType) - Method in interface nxopen.die.UncutRegionsBuilder

License requirements: None.

setResultsAutoUpdate(boolean) - Method in interface nxopen.validate.ValidatorOptions

License requirements: None.

setResultShellSection(Result.Section) - Method in interface nxopen.cae.ResultParameters

Set section where shell results are defined
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setResultsOption(FlowDisplayBuilder.AnalysisResults) - Method in interface nxopen.tooling.FlowDisplayBuilder

License requirements: ug_mold_design ("UG MOLD")
.

setResultSourceTag(NXObject) - Method in interface nxopen.cae.DurabilityEventBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setResultSpringBack(double[]) - Method in interface nxopen.bodydes.OnestepUnformBuilder

Sets springback result.

setResultStatus(FeatureProcessBuilderStatus.ResultStatus) - Method in interface nxopen.FeatureProcessBuilderStatus

Sets a result status code for a feature process builder.

setResultStrain(double[]) - Method in interface nxopen.bodydes.OnestepUnformBuilder

Sets strain result.

setResultStress(double[]) - Method in interface nxopen.bodydes.OnestepUnformBuilder

Sets stress result.

setResultThickness(double[]) - Method in interface nxopen.bodydes.OnestepUnformBuilder

Sets thickness result.

setResultType(BaseResultType) - Method in interface nxopen.cae.PostJtExportBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setResultType(EvaluationResultType) - Method in interface nxopen.cae.responsesimulation.FunctionEvaluationSettingBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setResultType(EvaluationResultType) - Method in interface nxopen.cae.responsesimulation.PrlResultsEvaluationSettingBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setResultType(StrainGageResult) - Method in interface nxopen.cae.responsesimulation.StrainGageBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setResultType(Result.Type) - Method in interface nxopen.cae.ResultParameters

Deprecated.

Deprecated in NX8.0.0. Use ResultParameters.getGenericResultType() instead.

setResultType(Result.Quantity) - Method in interface nxopen.cae.ResultProbeBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setResultType(SpringbackCompensationBuilder.ResultSheetType) - Method in interface nxopen.die.SpringbackCompensationBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR nx_freeform_2 ("advanced freeform modeling")
.

setResultType(ResultMeasure.ResultType) - Method in interface nxopen.motion.ResultMeasureBuilder

License requirements: mechanisms ("MECHANISMS")
.

setResultTypeName(String) - Method in interface nxopen.cae.ResultsReductionBuilder

Set result type name that will be displayed in postview
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setResultTypes(BaseResultType[], String[]) - Method in interface nxopen.cae.ResultsCombinationBuilder

The result types
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setResultTypes(BaseResultType[], String[], Unit[]) - Method in interface nxopen.cae.ResultsCombinationBuilder

The result types
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setResultUnit(Unit) - Method in interface nxopen.cae.ResultsReductionBuilder

Set result unit for given result type/dependent field variable type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setRetainAnnotations(boolean) - Method in interface nxopen.preferences.PartDrafting

Sets the flag indicating whether to retain Annotation objects when the geometry they are attached to is deleted.

setRetainColorFontWidth(int, int, int) - Method in interface nxopen.uf.UFDrf

Refer to UF_DRF_set_retain_color_font_width for documentation.

setRetainDimensions(boolean) - Method in interface nxopen.preferences.SessionSketch

Deprecated.

Deprecated in NX8.0.1. Use Annotations.AnnotationManager#makePmi and Annotations.AnnotationManager#removePmi with individual dimensions instead.

setRetainedState(UFDrf.RetainedState) - Method in interface nxopen.uf.UFDrf

Refer to UF_DRF_set_retained_state for documentation.

setRetainElementType(boolean) - Method in interface nxopen.cae.ElementTypeBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setRetainFidelityCheckingInformation(boolean) - Method in interface nxopen.preferences.SessionNXGateway

Sets the retain fidelity checking information flag for I-DEAS
License requirements: None.

setRetainRecipeFlag(boolean) - Method in interface nxopen.cae.AutoBCBuilder

License requirements: None.

setRetainStringValue(boolean) - Method in interface nxopen.blockstyler.FileSelection

License requirements: None.

setRetainStringValue(boolean) - Method in interface nxopen.blockstyler.FolderSelection

License requirements: None.

setRetainTarget(boolean) - Method in interface nxopen.features.BooleanBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setRetainTool(boolean) - Method in interface nxopen.features.BooleanBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setRetainValue(boolean) - Method in interface nxopen.blockstyler.DoubleBlock

License requirements: None.

setRetainValue(boolean) - Method in interface nxopen.blockstyler.DoubleTable

License requirements: None.

setRetainValue(boolean) - Method in interface nxopen.blockstyler.Enumeration

License requirements: None.

setRetainValue(boolean) - Method in interface nxopen.blockstyler.ExpressionBlock

License requirements: None.

setRetainValue(boolean) - Method in interface nxopen.blockstyler.IntegerBlock

License requirements: None.

setRetainValue(boolean) - Method in interface nxopen.blockstyler.IntegerTable

License requirements: None.

setRetainValue(boolean) - Method in interface nxopen.blockstyler.MultilineString

License requirements: None.

setRetainValue(boolean) - Method in interface nxopen.blockstyler.ObjectColorPicker

License requirements: None.

setRetainValue(boolean) - Method in interface nxopen.blockstyler.RGBColorPicker

License requirements: None.

setRetainValue(boolean) - Method in interface nxopen.blockstyler.StringBlock

License requirements: None.

setRetainValue(boolean) - Method in interface nxopen.blockstyler.TabControl

License requirements: None.

setRetainValue(boolean) - Method in interface nxopen.blockstyler.Table

License requirements: None.

setRetainValue(boolean) - Method in interface nxopen.blockstyler.Toggle

License requirements: None.

setRetDistChanged(boolean) - Method in interface nxopen.cam.InspectionUVGridBuilder

Flag indicating whether retract distance changed.

setRetiringFlag(int) - Method in interface nxopen.uf.UF

Refer to UF_set_retiring_flag for documentation.

setRetract(NXColor) - Method in interface nxopen.cam.PathDisplayColors

License requirements: cam_base ("CAM BASE")
.

setRetractDistance(double) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setRetractDistance(double) - Method in interface nxopen.cam.InspectionMoveBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setRetractOutputMode(HoleDrillingBuilder.RetractOutputModeType) - Method in interface nxopen.cam.HoleDrillingBuilder

License requirements: cam_base ("CAM BASE")
.

setRetractPoint(NXObject) - Method in interface nxopen.cam.WedmBasedGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setRetractPointStatus(int) - Method in interface nxopen.cam.WedmBasedGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setRetractPointToolAxis(NXObject) - Method in interface nxopen.cam.WedmBasedGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setRetractSpeedToggle(int) - Method in interface nxopen.cam.FeedsBuilder

License requirements: cam_base ("CAM BASE")
.

setRetractType(NcmLaserRetract.Type) - Method in interface nxopen.cam.NcmLaserRetract

License requirements: cam_base ("CAM BASE")
.

setRetractValue(double) - Method in interface nxopen.cam.CycleStepRetract

License requirements: cam_base ("CAM BASE")
.

setReturnColor(NXColor) - Method in interface nxopen.cam.PathDisplayColors

License requirements: cam_base ("CAM BASE")
.

setReturnDeltaAngle(double) - Method in interface nxopen.cam.TurnAvoidanceReturnBuilder

License requirements: cam_base ("CAM BASE")
.

setReturnDeltaDistance(double) - Method in interface nxopen.cam.TurnAvoidanceReturnBuilder

License requirements: cam_base ("CAM BASE")
.

setReturnDeltaVector(NXObject) - Method in interface nxopen.cam.TurnAvoidanceReturnBuilder

License requirements: cam_base ("CAM BASE")
.

setReturnDeltaX(double) - Method in interface nxopen.cam.TurnAvoidanceReturnBuilder

License requirements: cam_base ("CAM BASE")
.

setReturnDeltaY(double) - Method in interface nxopen.cam.TurnAvoidanceReturnBuilder

License requirements: cam_base ("CAM BASE")
.

setReturnFlag(ProbeProtectedParametersBuilder.DepMethodTypes) - Method in interface nxopen.cam.ProbeProtectedParametersBuilder

License requirements: cam_base ("CAM BASE")
.

setReturnMoveMode(TurnRoughFinishLocalReturnBuilder.ReturnMoveModeTypes) - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder

License requirements: cam_base ("CAM BASE")
.

setReturnMoveOption(TurnRoughFinishTestCut.ReturnMoveTypes) - Method in interface nxopen.cam.TurnRoughFinishTestCut

License requirements: cam_base ("CAM BASE")
.

setReturnMovePoint(Point) - Method in interface nxopen.cam.TurnRoughFinishTestCut

License requirements: cam_base ("CAM BASE")
.

setReturnPoint(Point) - Method in interface nxopen.cam.TurnAvoidanceReturnBuilder

License requirements: cam_base ("CAM BASE")
.

setReturnPointMode(TurnAvoidanceReturnBuilder.ReturnPointModes) - Method in interface nxopen.cam.TurnAvoidanceReturnBuilder

License requirements: cam_base ("CAM BASE")
.

setReturnPointMotionType(TurnAvoidanceReturnBuilder.ReturnPointMotionTypes) - Method in interface nxopen.cam.TurnAvoidanceReturnBuilder

License requirements: cam_base ("CAM BASE")
.

setReturnStartAngle(double) - Method in interface nxopen.tooling.DefineCamBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setReturnStartAngle(double) - Method in interface nxopen.tooling.UserDefinedMotionBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setReturnStopAngle(double) - Method in interface nxopen.tooling.DefineCamBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setReturnStopAngle(double) - Method in interface nxopen.tooling.UserDefinedMotionBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setReusablePartBuilder(TaggedObject) - Method in interface nxopen.tooling.ElectrodeBlankBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setReusablePocketBuilder(ReusablePocketBuilder) - Method in interface nxopen.tooling.AddReusablePart

Sets the reusable pocket builder
License requirements: None.

setReusablePocketBuilder(ReusablePocketBuilder) - Method in interface nxopen.tooling.FastenerAssy

Sets the reusable pocket builder
License requirements: None.

setReuseBuilder(int, FastenerAssy.StackTypeMethod, int, Component) - Method in interface nxopen.tooling.FastenerAssy

Sets the reuse builder
License requirements: None.

setReuseMatchTolerance(double) - Method in interface nxopen.weld.AutoPointBuilder

License requirements: ugweld ("UG WELD")
.

setReversalMode(RoughTurningBuilder.ReversalModeTypes) - Method in interface nxopen.cam.RoughTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setReverse(int) - Method in interface nxopen.die.DieLimitsBuilder

License requirements: None.

setReverse(boolean) - Method in interface nxopen.features.shipdesign.EdgeReinforcementBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setReverse(boolean) - Method in interface nxopen.features.shipdesign.EditStockBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setReverse(boolean) - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setReverse(boolean) - Method in interface nxopen.features.shipdesign.SubSystemBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setReverseAnchorPoint(boolean) - Method in interface nxopen.die.AddendumSectionUserDefinedBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setReverseArrowDirection(boolean) - Method in interface nxopen.annotations.DimensionPreferences

Sets the flag indicating whether the Reverse Arrow Direction is set on dimension or not
License requirements: None.

setReverseArrowDirection(boolean) - Method in interface nxopen.annotations.DimensionStyleBuilder

Sets the reverse arrow direction flag
License requirements: nx_ship_drafting ("Ship Drafting") OR drafting ("DRAFTING")
.

setReverseAttachmentDirection(boolean) - Method in interface nxopen.features.shipdesign.EdgeReinforcementBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setReverseAxis(boolean) - Method in interface nxopen.SketchAlongPathBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setReverseAxis(boolean) - Method in interface nxopen.SketchInPlaceBuilder

Deprecated.

Deprecated in NX11.0.0. Get NXOpen.SketchInPlaceBuilder.AxisReference, and then reverse the smart direction.

setReverseBendAngle(boolean) - Method in interface nxopen.routing.RouteSweptFoldBuilder

License requirements: routing_harness ("Routing Harness")
.

setReverseBendDirection(boolean) - Method in interface nxopen.features.sheetmetal.AeroLighteningCutoutBuilder

License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setReverseBendDirection(boolean) - Method in interface nxopen.features.sheetmetal.LighteningCutoutBuilder

License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setReverseBoundary1Direction(boolean) - Method in interface nxopen.features.StepBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setReverseBoundary2Direction(boolean) - Method in interface nxopen.features.StepBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setReverseCurveDirection(boolean) - Method in interface nxopen.geometricutilities.ModlAlongCurveAngle

License requirements: None.

setReversed(boolean) - Method in interface nxopen.assemblies.Order

Sets the reverse state of the Order
License requirements: assemblies ("ASSEMBLIES MODULE")

Created in NX9.0.0

setReversed(boolean) - Method in interface nxopen.cam.CycleSpindle

License requirements: cam_base ("CAM BASE")
.

setReverseDepthDirection(boolean) - Method in interface nxopen.features.ShelfBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setReverseDepthDirection(boolean) - Method in interface nxopen.features.StepBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setReverseDir(boolean) - Method in interface nxopen.features.vehicledesign.ReflectionDataBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setReverseDirection(boolean) - Method in interface nxopen.cae.MMCCreateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setReverseDirection(boolean) - Method in interface nxopen.cae.QueryCurveUsageOptions

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setReverseDirection(boolean) - Method in interface nxopen.cae.responsesimulation.VelocityImpactDirection

License requirements: nx_response_anlys ("NX Response Analysis")
.

setReverseDirection(boolean) - Method in interface nxopen.cam.CenterlineDrillTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setReverseDirection(boolean) - Method in interface nxopen.cam.InspectionArcFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setReverseDirection(boolean) - Method in interface nxopen.cam.InspectionCircleFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setReverseDirection(boolean) - Method in interface nxopen.cam.InspectionCparlnFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setReverseDirection(boolean) - Method in interface nxopen.cam.InspectionLineFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setReverseDirection(boolean) - Method in interface nxopen.cam.InspectionPointFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setReversedirection(boolean) - Method in interface nxopen.cam.InspectionScanArcBuilder

License requirements: None.

setReversedirection(boolean) - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder

License requirements: None.

setReversedirection(boolean) - Method in interface nxopen.cam.InspectionScanCurveBuilder

License requirements: None.

setReversedirection(boolean) - Method in interface nxopen.cam.InspectionScanHelixBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setReversedirection(boolean) - Method in interface nxopen.cam.InspectionScanLineBuilder

License requirements: None.

setReverseDirection(boolean) - Method in interface nxopen.cam.InspectionSurfaceFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setReverseDirection(boolean) - Method in interface nxopen.cam.InspectionTorusFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setReverseDirection(boolean) - Method in interface nxopen.die.FingerClearanceNotchBuilder

License requirements: ug_die_design ("Die Design")
.

setReverseDirection(boolean) - Method in interface nxopen.drawings.HingeLineBuilder

License requirements: None.

setReverseDirection(boolean) - Method in interface nxopen.drawings.SketchSectionLineBuilder

License requirements: drafting ("DRAFTING")
.

setReverseDirection(boolean) - Method in interface nxopen.features.AdaptiveShellBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setReverseDirection(boolean) - Method in interface nxopen.features.AdmOffsetRegionBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setReverseDirection(boolean) - Method in interface nxopen.features.CompositeCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setReverseDirection(boolean) - Method in interface nxopen.features.CopyFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setReverseDirection(boolean) - Method in interface nxopen.features.CutFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setReverseDirection(boolean) - Method in interface nxopen.features.CylinderBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setReverseDirection(boolean) - Method in interface nxopen.features.DatumAxisBuilder

Sets
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setReverseDirection(boolean) - Method in interface nxopen.features.HoleFeatureBuilder

License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.

setReverseDirection(boolean) - Method in interface nxopen.features.MatchedReferenceBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setReverseDirection(boolean) - Method in interface nxopen.features.MirrorBodyBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setReverseDirection(boolean) - Method in interface nxopen.features.OffsetCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setReverseDirection(boolean) - Method in interface nxopen.features.OffsetEmbossBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setReverseDirection(boolean) - Method in interface nxopen.features.OffsetRegionBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setReverseDirection(boolean) - Method in interface nxopen.features.PartGeometryCopySelectBuilder

License requirements: gateway ("UG GATEWAY")
.

setReverseDirection(boolean) - Method in interface nxopen.features.PatchBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setReverseDirection(boolean) - Method in interface nxopen.features.ReplaceFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setReverseDirection(boolean) - Method in interface nxopen.features.sheetmetal.AdvancedFlangeBuilder

License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setReverseDirection(boolean) - Method in interface nxopen.features.sheetmetal.JoggleInputListItemBuilder

License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setReverseDirection(boolean) - Method in interface nxopen.features.sheetmetal.SheetMetalFromSolidBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setReverseDirection(boolean) - Method in interface nxopen.features.shipdesign.CustomBracketBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setReverseDirection(boolean) - Method in interface nxopen.features.shipdesign.PlateChamferBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setReverseDirection(boolean) - Method in interface nxopen.features.shipdesign.ShipTrimBodyBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setReverseDirection(boolean) - Method in interface nxopen.features.shipdesign.SplitProfilePlateBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setReverseDirection(boolean) - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder

Deprecated.

Deprecated in NX8.0.3. Use StandardPartFrameworkBuilder .ModifySpreadSheetData() instead.

setReverseDirection(boolean) - Method in interface nxopen.features.ThickenBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setReverseDirection(boolean) - Method in interface nxopen.features.VariableOffsetBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setReverseDirection(boolean) - Method in interface nxopen.features.WaveDatumBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setReverseDirection(int) - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder

License requirements: None.

setReverseDirection(boolean) - Method in interface nxopen.geometricutilities.BooleanToolBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setReverseDirection(boolean) - Method in interface nxopen.geometricutilities.LawBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setReverseDirection(boolean) - Method in interface nxopen.linedesigner.RailOpeningFeatureBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setReverseDirection(boolean) - Method in interface nxopen.routing.EditLineSegmentBuilder

Sets the reverse direction flag.

setReverseDirection(boolean) - Method in interface nxopen.tooling.CoolingExtendBuilder

License requirements: None.

setReverseDirection(boolean) - Method in interface nxopen.tooling.FormingInsertBuilder

License requirements: None.

setReverseDirection(boolean) - Method in interface nxopen.tooling.OffsetCurve3DBuilder

Deprecated.

Deprecated in NX10.0.0. Please use Offset3DCurveBuilder.setReverseSide(boolean) instead

setReverseDirection(boolean) - Method in interface nxopen.weld.EasyPatternBuilder

License requirements: ugweld ("UG WELD")
.

setReverseDirection(boolean) - Method in interface nxopen.weld.JointmarkGuideBuilder

License requirements: ugweld ("UG WELD")
.

setReverseDirection1(boolean) - Method in interface nxopen.features.shipdesign.Cutout2Builder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setReverseDirection1(boolean) - Method in interface nxopen.features.shipdesign.ShipCutoutBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setReverseDirection2(boolean) - Method in interface nxopen.features.shipdesign.Cutout2Builder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setReverseDirection2(boolean) - Method in interface nxopen.features.shipdesign.ShipCutoutBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setReverseDirection3(boolean) - Method in interface nxopen.features.shipdesign.Cutout2Builder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setReverseEdgeDirection(boolean) - Method in interface nxopen.cam.InspectionEdgePointFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setReverseEnd(boolean) - Method in interface nxopen.routing.HealPath

Sets the reverse end end.

setReverseEndDirection(boolean) - Method in interface nxopen.features.BridgeCurveBuilder

Deprecated.

Deprecated in NX8.5.0. Use BridgeCurveBuilderEx instead.

setReverseEndOffset(boolean) - Method in interface nxopen.features.shipdesign.PillarBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setReverseEndOffset(boolean) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setReverseEndSurface(boolean) - Method in interface nxopen.features.SectionSurfaceBuilder

Deprecated.

Deprecated in NX9.0.0. Use SectionSurfaceBuilderEx instead.

setReverseExtendDirection(boolean) - Method in interface nxopen.features.GuidedExtensionBuilderEx

Reverses surface extend direction
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setReverseExtendDirection(boolean) - Method in interface nxopen.tooling.GuidedExtensionBuilder

Reverses surface extend direction
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING")
.

setReverseFaceNormal(boolean) - Method in interface nxopen.cam.InspectionPlaneFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setReverseFirstFaceNormal(boolean) - Method in interface nxopen.features.FaceBlendBuilder

License requirements: None.

setReverseFixedSegment(boolean) - Method in interface nxopen.routing.RouteSweptFoldBuilder

License requirements: routing_harness ("Routing Harness")
.

setReverseFoldRotationAngle(boolean) - Method in interface nxopen.routing.RouteSweptFoldBuilder

License requirements: routing_harness ("Routing Harness")
.

setReverseGuideOffset(boolean) - Method in interface nxopen.features.shipdesign.SteelVentHolesBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setReverseHeightDirection(boolean) - Method in interface nxopen.features.AeroRibBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setReverseInsertDirection(boolean) - Method in interface nxopen.tooling.GeneralInsertBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setReverseLimit1OffsetDirection(boolean) - Method in interface nxopen.features.AeroFlangeBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setReverseLimit1OffsetDirection(boolean) - Method in interface nxopen.features.AeroRibBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setReverseLimit2OffsetDirection(boolean) - Method in interface nxopen.features.AeroFlangeBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setReverseLimit2OffsetDirection(boolean) - Method in interface nxopen.features.AeroRibBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setReverseLine1Offset(boolean) - Method in interface nxopen.features.shipdesign.PillarBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setReverseLine1Offset(boolean) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setReverseLine2Offset(boolean) - Method in interface nxopen.features.shipdesign.PillarBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setReverseLine2Offset(boolean) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setReverseMainRun(boolean) - Method in interface nxopen.formboard.FormboardLayoutBuilder

License requirements: routing_harness ("Routing Harness")
.

setReverseMetalThickness(boolean) - Method in interface nxopen.die.DrawBeadBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setReverseMotionSide(boolean) - Method in interface nxopen.features.StepBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setReverseNeedles(boolean) - Method in interface nxopen.geometricutilities.CombOptionsBuilder

License requirements: None.

setReverseNormal(int) - Method in interface nxopen.die.WearPlateLocChildBuilder

Sets the reverse normal setting of die wear plate and locators
License requirements: ug_die_design ("Die Design")
.

setReverseNormal(int) - Method in interface nxopen.die.WearPlateLocParentBuilder

Sets the reverse normal setting of die wear plate and locators
License requirements: ug_die_design ("Die Design")
.

setReverseNormal(int) - Method in interface nxopen.features.OvercrownBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setReverseNormal(boolean) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setReverseNormal1(boolean) - Method in interface nxopen.features.AestheticFaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setReverseNormal2(boolean) - Method in interface nxopen.features.AestheticFaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setReverseNormalDirection(boolean) - Method in interface nxopen.cae.responsesimulation.SensorBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setReverseNormalDirection(boolean) - Method in interface nxopen.features.ConcaveFacesBuilder

License requirements: None.

setReverseNormalFlag(boolean) - Method in interface nxopen.geometricutilities.FaceSetData

License requirements: solid_modeling ("SOLIDS MODELING")
.

setReverseOffset(boolean) - Method in interface nxopen.features.RibbonBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setReverseOffsetDirection(boolean) - Method in interface nxopen.features.OffsetEdgeBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setReverseOffsetDirection(boolean) - Method in interface nxopen.features.OffsetMoveCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setReverseOffsetDirection(boolean) - Method in interface nxopen.features.RibBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setReverseOffsetDirection(boolean) - Method in interface nxopen.weld.WeldBeadPathBuilder

License requirements: ugweld ("UG WELD")
.

setReverseOffsets(boolean) - Method in interface nxopen.features.ChamferBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setReverseOffsetSide(boolean) - Method in interface nxopen.features.OffsetEdgeBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setReverseOrientation(boolean) - Method in interface nxopen.die.HandlingCoreChildBuilder

Sets the value to reverse the orientation of the core plane, if true the handling core orientation normal will be reversed, if false it will not.

setReverseOrientation(boolean) - Method in interface nxopen.die.KeywayChildBuilder

Sets the value to reverse the orientation of the orientation plane, if true the keyway orientation normal will be reversed, if false it will not.

setReverseOrientation(boolean) - Method in interface nxopen.die.PadChildBuilder

Sets the value to reverse the orientation of the orientation plane, if true the pad orientation normal will be reversed, if false it will not.

setReverseOrientationDirection(boolean) - Method in interface nxopen.features.shipdesign.PillarBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setReverseOrientationDirection(boolean) - Method in interface nxopen.features.shipdesign.PillarSystemBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setReverseOverlap(boolean) - Method in interface nxopen.features.sheetmetal.EditCornerBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setReversePathDirection(boolean) - Method in interface nxopen.features.shipdesign.ProfileSystemBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setReversePlaneNormal(boolean) - Method in interface nxopen.SketchAlongPathBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setReversePlaneNormal(boolean) - Method in interface nxopen.SketchInPlaceBuilder

Deprecated.

Deprecated in NX11.0.0. Get NXOpen.SketchInPlaceBuilder.PlaneReference, and then reverse the smart plane normal.

setReversePropagation(boolean) - Method in interface nxopen.linedesigner.TypedConnectorFeatureBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setReverseReferenceDirection(boolean) - Method in interface nxopen.features.shipdesign.PillarBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setReverseReferenceDirection(boolean) - Method in interface nxopen.features.shipdesign.PillarSystemBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setReverseRibDirection(boolean) - Method in interface nxopen.features.RibBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setReverseSecondaryDirection(boolean) - Method in interface nxopen.features.FlatteningAndFormingBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setReverseSecondFaceNormal(boolean) - Method in interface nxopen.features.FaceBlendBuilder

License requirements: None.

setReverseSection(boolean) - Method in interface nxopen.DatumPlane

Sets the reverse section flag
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setReverseSection(boolean) - Method in interface nxopen.IPlane

Sets the reverse_section
License requirements: None.

setReverseSeedNormal(boolean) - Method in interface nxopen.cae.modelcheck.AlignShellElementNormalBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setReverseSeries(boolean) - Method in interface nxopen.display.DynamicSectionBuilder

License requirements: None.

setReverseSheetNormal(boolean) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setReverseSide(boolean) - Method in interface nxopen.bodydes.OnestepUnformBuilder

License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setReverseSide(boolean) - Method in interface nxopen.die.TrimLineDevelopmentBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setReverseSide(boolean) - Method in interface nxopen.features.Offset3DCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setReverseSide(boolean) - Method in interface nxopen.features.shipdesign.CuttingSideFacesBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setReverseSide(boolean) - Method in interface nxopen.IPlane

Sets the reverse side
License requirements: None.

setReverseSide(boolean) - Method in interface nxopen.tooling.BlendCurve3DBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING")
.

setReverseSourceDirection(boolean) - Method in interface nxopen.die.DieDirectionBuilder

License requirements: None.

setReverseSourceDirection(boolean) - Method in interface nxopen.die.DiePlaneBuilder

License requirements: ug_die_design ("Die Design")
.

setReverseSplitDirection(boolean) - Method in interface nxopen.features.shipdesign.SplitStandardPartBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setReverseStart(boolean) - Method in interface nxopen.routing.HealPath

Sets the reverse start end.

setReverseStartDirection(boolean) - Method in interface nxopen.features.BridgeCurveBuilder

Deprecated.

Deprecated in NX8.5.0. Use BridgeCurveBuilderEx instead.

setReverseStartDirection(boolean) - Method in interface nxopen.features.SectionSurfaceBuilder

Deprecated.

Deprecated in NX9.0.0. Use SectionSurfaceBuilderEx instead.

setReverseStartDirection(boolean) - Method in interface nxopen.features.SpineCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setReverseStartOffset(boolean) - Method in interface nxopen.features.shipdesign.PillarBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setReverseStartOffset(boolean) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setReverseSubdividePoint(boolean) - Method in interface nxopen.routing.SubdivideSegmentBuilder

License requirements: routing_base ("Routing Basic")
.

setReverseSurfaceDirection(boolean) - Method in interface nxopen.cam.InspectionEdgePointFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setReverseTaperDirection(boolean) - Method in interface nxopen.features.sheetmetal.BendTaperBuilder

Deprecated.

Deprecated in NX10.0.0. Use BendTaperBuilder.stationaryEntity() and BendTaperBuilder.setStationaryEntity(nxopen.NXObject) instead.

setReverseTarget(boolean) - Method in interface nxopen.features.PasteFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setReverseTarget(boolean) - Method in interface nxopen.features.TrimAndExtendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setReverseThicknessDirection(boolean) - Method in interface nxopen.features.AeroFlangeBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setReverseThicknessDirection(boolean) - Method in interface nxopen.features.AeroRibBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setReverseThicknessDirection(boolean) - Method in interface nxopen.features.RibBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setReverseThicknessDirection(boolean) - Method in interface nxopen.features.sheetmetal.MetaformBuilder

License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setReverseThicknessOffsetDirection(boolean) - Method in interface nxopen.features.AeroFlangeBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setReverseThicknessOffsetDirection(boolean) - Method in interface nxopen.features.AeroRibBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setReverseThirdFaceNormal(boolean) - Method in interface nxopen.features.FaceBlendBuilder

License requirements: None.

setReverseTool(boolean) - Method in interface nxopen.features.PasteFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setReverseTool(boolean) - Method in interface nxopen.features.TrimAndExtendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setReverseTransformation(boolean) - Method in interface nxopen.features.FlatteningAndFormingBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setReverseTransformation(boolean) - Method in interface nxopen.FlatteningBuilder

Deprecated.

Deprecated in NX11.0.0. Use FlatteningAndFormingBuilder instead.

setReverseTrimDirection(boolean) - Method in interface nxopen.tooling.SplitSolidBuilder

License requirements: None.

setReverseTrimSide(boolean) - Method in interface nxopen.die.SteelInsertBuilder

Sets the reverse trim side setting of the steel insert.

setReverseTrimSide(boolean) - Method in interface nxopen.die.TrimTaskBuilder

Sets the reverse trim side setting of the trim task.

setReverseTrimSide(boolean) - Method in interface nxopen.features.sheetmetal.AdvancedFlangeBuilder

License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setReverseU(boolean) - Method in interface nxopen.SurfaceUVDirectionBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setReverseV(boolean) - Method in interface nxopen.SurfaceUVDirectionBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setReverseValue(int) - Method in interface nxopen.routing.AssignCornerBuilder

License requirements: routing_base ("Routing Basic")
.

setReverseWidth1Direction(boolean) - Method in interface nxopen.features.AeroFlangeBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setReverseWidth2Direction(boolean) - Method in interface nxopen.features.AeroFlangeBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setReverseWidthDirection(boolean) - Method in interface nxopen.features.ShelfBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setReverseWindDirection(boolean) - Method in interface nxopen.routing.WindCatcherBuilder

License requirements: routing_hvac ("Routing HVAC")
.

setReversible(boolean) - Method in interface nxopen.linedesigner.SingleElementConveyorBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setReviewDecisions(int) - Method in interface nxopen.features.shipdesign.PenetrationReviewRequestBuilder

License requirements: nx_penetration_mgmt ("Penetration Management")
.

setReviewSection(boolean) - Method in interface nxopen.features.VarsweepBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setRevision(String) - Method in interface nxopen.annotations.BalloonNoteBuilder

License requirements: None.

setRevision(String) - Method in interface nxopen.annotations.CoordinateNoteBuilder

License requirements: None.

setRevision(String) - Method in interface nxopen.annotations.GeneralNoteBuilder

License requirements: None.

setRevision(String) - Method in interface nxopen.annotations.MasterSymbolBuilder

Deprecated.

Deprecated in NX10.0.0. Use PartOperationCreateBuilder instead.

setRevision(String) - Method in interface nxopen.annotations.MaterialSpecificationBuilder

License requirements: None.

setRevision(String) - Method in interface nxopen.annotations.PartIdentificationBuilder

License requirements: None.

setRevision(String) - Method in interface nxopen.annotations.ProcessSpecificationBuilder

License requirements: None.

setRevision(String) - Method in interface nxopen.annotations.RevisionBusinessModifierBuilder

License requirements: geometric_tol ("GDT")
.

setRevision(String) - Method in interface nxopen.annotations.SpecificNoteBuilder

License requirements: None.

setRevision(String) - Method in interface nxopen.annotations.SymbolCatalogBuilder

Deprecated.

Deprecated in NX10.0.0. Use PartOperationCreateBuilder instead.

setRevision(String) - Method in interface nxopen.drafting.DrawingCreationWizardBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setRevision(String) - Method in interface nxopen.drawings.DrawingSheetBuilder

License requirements: drafting ("DRAFTING")
.

setRevisionAttr(String) - Method in interface nxopen.pdm.PartOperationImportBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setRevisionID(String) - Method in interface nxopen.mechatronics.ObjectInformationBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setRevisionRule(String) - Method in interface nxopen.assemblies.SubsetConfigurationBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setRevisionRule(String) - Method in interface nxopen.mechatronics.PreferencesBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setRevisionRule(String) - Method in interface nxopen.pdm.ConfigurationContextBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setRevisionRule(String) - Method in interface nxopen.validate.RequirementCollection

License requirements: None.

setRevisionRule(String) - Method in interface nxopen.ValidationCollection

Deprecated.

Deprecated in NX8.5.0. Use RequirementCollection.setRevisionRule(java.lang.String) instead.

setRevisionString(String) - Method in interface nxopen.linedesigner.InsertSheetBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setRevMethod(InspectionCmmCommandBuilder.RevMethods) - Method in interface nxopen.cam.InspectionCmmCommandBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setRevName(String) - Method in interface nxopen.cam.InspectionCmmCommandBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setRevolutions(double) - Method in interface nxopen.cam.CutDwell

License requirements: cam_base ("CAM BASE")
.

setRevolutions(double) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setRevolveAngle(double) - Method in interface nxopen.cae.AxiSymmetricParameters

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setRevUp(boolean) - Method in interface nxopen.uf.UFClone

Refer to UF_CLONE_set_rev_up for documentation.

setRHLeft(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactRearHeaderDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setRHLeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactRearHeaderDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setRho(String) - Method in interface nxopen.geometricutilities.ConicCrossSection

Deprecated.

Deprecated in NX9.0.0. To set the value of the expression modify the expression directly using ConicCrossSection.rho() and Expression.setRightHandSide(java.lang.String) .

setRho(double) - Method in interface nxopen.SketchConicBuilder

License requirements: None.

setRhoOption(AestheticFaceBlendBuilder.RhoType) - Method in interface nxopen.features.AestheticFaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setRhoOption(ConicCrossSection.RhoMethod) - Method in interface nxopen.geometricutilities.ConicCrossSection

License requirements: solid_modeling ("SOLIDS MODELING")
.

setRhoType(FaceBlendBuilder.RhoMethod) - Method in interface nxopen.features.FaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setRhoValue(double) - Method in interface nxopen.features.AestheticFaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setRhoValue(double) - Method in interface nxopen.features.GeneralConicBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setRHRight(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactRearHeaderDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setRHRightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactRearHeaderDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setRibbonVis(UFVariant, int) - Method in interface nxopen.uf.UFUi

Refer to UF_UI_set_ribbon_vis for documentation.

setRibCapGeometryOption(RibBuilder.RibCapGeometryOptions) - Method in interface nxopen.features.RibBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setRibDraftOption(RibBuilder.RibDraftOptions) - Method in interface nxopen.features.RibBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setRibForm(AeroRibBuilder.RibForms) - Method in interface nxopen.features.AeroRibBuilder

License requirements: None.

setRibMaxArea(double) - Method in interface nxopen.cae.RemoveRibsBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setRibMaxElem(int) - Method in interface nxopen.cae.RemoveRibsBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setRibMinBoundaryNodeRatio(int) - Method in interface nxopen.cae.RemoveRibsBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setRibSupportWidth(String) - Method in interface nxopen.die.WearPlateLocChildBuilder

License requirements: ug_die_design ("Die Design")
.

setRibSupportWidth(String) - Method in interface nxopen.die.WearPlateLocParentBuilder

License requirements: ug_die_design ("Die Design")
.

setRibThicknessOffsetOption(RibBuilder.RibThicknessOffsetOptions) - Method in interface nxopen.features.RibBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setRibType(RibBuilder.RibTypes) - Method in interface nxopen.features.RibBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setRichText(String[]) - Method in interface nxopen.cam.WorkInstructionBuilder

Sets the multi line text
License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.

setRightDialogItem(String) - Method in interface nxopen.uistyler.Attachment

Sets the right dialog item
License requirements: None.

setRightDistance(double) - Method in interface nxopen.tooling.BlankLayoutBuilder

License requirements: None.

setRightEyeColor(NXColor) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setRightEyeDownColor(NXColor) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setRightEyeUpColor(NXColor) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setRightHandSide(String) - Method in interface nxopen.Expression

License requirements: None.

setRightMargin(double) - Method in interface nxopen.drawings.BordersAndZonesBuilder

Deprecated.

Deprecated in NX10.0.0. Use SheetMarginSettingsBuilder.rightTrimmedMargin() instead.

setRightOffset(int) - Method in interface nxopen.uistyler.Attachment

Sets the right offset
License requirements: None.

setRightTrimmedMargin(double) - Method in interface nxopen.drawings.SheetMarginSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setRightUntrimmedMargin(double) - Method in interface nxopen.drawings.SheetMarginSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setRightView(boolean) - Method in interface nxopen.drawings.ViewCreationWizardBuilder

License requirements: drafting ("DRAFTING")
.

setRigid(boolean) - Method in interface nxopen.features.GroupFaceBuilder

License requirements: None.

setRigidBodyTolerance(double) - Method in interface nxopen.cae.ModelUpdateOptionsBuilder

License requirements: nx_correl_update ("FE Model Update")
.

setRigidLink(Link) - Method in interface nxopen.motion.LoadTransferControl

Sets rigid link
License requirements: mechanisms ("MECHANISMS")
.

setRigidSetConstraintOption(SessionSketch.RigidSetConstraintType) - Method in interface nxopen.preferences.SessionSketch

Deprecated.

Deprecated in NX11.0.0. Use SessionSketch.setGroupConstraintOption(nxopen.preferences.SessionSketch.GroupConstraintType) instead.

setRimOffset(double) - Method in interface nxopen.features.vehicledesign.BaseDataWheelBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setRimRoadGlobal(boolean) - Method in interface nxopen.motion.TirePropertyCdBuilder

License requirements: mechanisms ("MECHANISMS")
.

setRimRoadTydexW(boolean) - Method in interface nxopen.motion.TirePropertyCdBuilder

License requirements: mechanisms ("MECHANISMS")
.

setRimTydexCH(boolean) - Method in interface nxopen.motion.TirePropertyCdBuilder

License requirements: mechanisms ("MECHANISMS")
.

setRipEdges(Edge[]) - Method in interface nxopen.features.sheetmetal.ConvertToSheetmetalBuilder

Sets the array of edges that need to be ripped while converting to sheetmetal.

setRipEdges(Edge[]) - Method in interface nxopen.features.sheetmetal.EdgeRipBuilder

Edges to rip
License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setRipSection(Section) - Method in interface nxopen.features.sheetmetal.ConvertToSheetmetalBuilder

Sets the section containing curves that need to be ripped while converting to sheetmetal.

setRmsError(double) - Method in interface nxopen.cae.AfuMathFastRMSOutput

Returns the rms error
License requirements: nx_ftk ("NX Advanced Graphing")
.

setRoadGlobal(boolean) - Method in interface nxopen.motion.TirePropertyCdBuilder

License requirements: mechanisms ("MECHANISMS")
.

setRoadHeightAdjustment(LmsSolverProperty.RoadHeightAdjustmentTypes) - Method in interface nxopen.motion.LmsSolverProperty

License requirements: mechanisms ("MECHANISMS")
.

setRoadObject(Road) - Method in interface nxopen.motion.RoadBuilder

License requirements: mechanisms ("MECHANISMS")
.

setRoadType(RoadBuilder.TypeChoices) - Method in interface nxopen.motion.RoadBuilder

License requirements: mechanisms ("MECHANISMS")
.

setRockerAxisDirection(Axis) - Method in interface nxopen.tooling.DefineCamBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setRockerCamDirection(Direction) - Method in interface nxopen.tooling.DefineCamBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setRodType(HydraulicCylinderBuilder.OutputRodType) - Method in interface nxopen.mechatronics.HydraulicCylinderBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setRodType(PneumaticCylinderBuilder.OutputRodType) - Method in interface nxopen.mechatronics.PneumaticCylinderBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setRole(String) - Method in interface nxopen.pdm.SessionSettings

License requirements: None.

setRollingRadiusType(TirePropertyAdvancedParameters.RollingType) - Method in interface nxopen.motion.TirePropertyAdvancedParameters

License requirements: mechanisms ("MECHANISMS")
.

setRollMoment(boolean) - Method in interface nxopen.motion.TirePropertyHighOrderParameters

License requirements: mechanisms ("MECHANISMS")
.

setRollOntoEdge(boolean) - Method in interface nxopen.features.EdgeBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setRolloverDelay(int) - Method in interface nxopen.display.SelPref

License requirements: None.

setRollOverSmoothEdge(boolean) - Method in interface nxopen.features.EdgeBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setRollToolOverEdges(boolean) - Method in interface nxopen.cam.MillCutParameters

License requirements: cam_base ("CAM BASE")
.

setRootLine(NXObject) - Method in interface nxopen.cam.ThreadTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setRootOpening(double) - Method in interface nxopen.weld.EdgePrepValuesBuilder

License requirements: structure_weld ("STRUCTURE WELD")
.

setRootOpening(String) - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. Use WeldGrooveBuilder.rootOpening() and WeldGrooveBuilder.setRootOpening(boolean) instead.

setRootOpening(double) - Method in interface nxopen.weld.JointExitBuilder

License requirements: structure_weld ("STRUCTURE WELD")
.

setRootOpening(boolean) - Method in interface nxopen.weld.WeldGrooveBuilder

License requirements: ugweld ("UG WELD")
.

setRootPart(Part) - Method in interface nxopen.features.shipdesign.PenetrationUtils

Make part root part and work part
License requirements: nx_penetration_mgmt ("Penetration Management")
.

setRootPenetration(String) - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. Use WeldGrooveBuilder.rootPenetration() and WeldGrooveBuilder.setRootPenetration(boolean) instead.

setRootPenetration(boolean) - Method in interface nxopen.weld.WeldGrooveBuilder

License requirements: ugweld ("UG WELD")
.

setRootUpdate(WeldRootUpdate) - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. This functionality is no longer supported.

setRotary1(String) - Method in interface nxopen.sim.KinematicChain

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setRotary2(String) - Method in interface nxopen.sim.KinematicChain

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setRotary3(String) - Method in interface nxopen.sim.KinematicChain

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setRotary4(String) - Method in interface nxopen.sim.KinematicChain

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setRotary5(String) - Method in interface nxopen.sim.KinematicChain

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setRotary6(String) - Method in interface nxopen.sim.KinematicChain

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setRotaryCurveType(UserDefinedMotionBuilder.RotaryCurveTypes) - Method in interface nxopen.tooling.UserDefinedMotionBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setRotaryDirection(Axis) - Method in interface nxopen.tooling.DefineCamBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setRotaryMaxAngleLimit(double) - Method in interface nxopen.cam.MillCutParameters

License requirements: cam_base ("CAM BASE")
.

setRotaryMinAngleLimit(double) - Method in interface nxopen.cam.MillCutParameters

License requirements: cam_base ("CAM BASE")
.

setRotaryMotionAxis(Axis) - Method in interface nxopen.tooling.UserDefinedMotionBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setRotate(double) - Method in interface nxopen.tooling.BlankLayoutBuilder

License requirements: None.

setRotateAbout(ToolAxisAdvanced.RotateAboutType) - Method in interface nxopen.cam.ToolAxisAdvanced

License requirements: cam_base ("CAM BASE")
.

setRotateAngle(double) - Method in interface nxopen.cam.SplitSubopCommand

License requirements: None.

setRotateCenter(Point) - Method in interface nxopen.facet.BestFitAlignBuilder

Sets the rotation center
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_1 ("basic freeform modeling")
.

setRotateCsys(CoordinateSystem) - Method in interface nxopen.motion.LinkInitialVelocity

License requirements: mechanisms ("MECHANISMS")
.

setRotateDirection(Direction) - Method in interface nxopen.tooling.SlugRetentionBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setRotateDisplayTextFlag(boolean) - Method in interface nxopen.cae.SimBCDisplay

Sets the true/false flag based on whether the text of the BC is rotated in the graphics window
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setRotateMagnitude(double) - Method in interface nxopen.motion.LinkInitialVelocity

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using LinkInitialVelocity.rotateExpression() to query or edit it.

setRotateMirrorFace(boolean) - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setRotatePoint(Point) - Method in interface nxopen.tooling.LayoutBuilder

License requirements: None.

setRotatePoint(Point) - Method in interface nxopen.tooling.LayoutRepositionBuilder

License requirements: None.

setRotateTableAngle(double) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setRotateTableAngularDeviation(double) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setRotateTableDirection(InspectionAlignmentBuilder.RotateTableDirections) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setRotateTableFeature(String) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setRotateTableMethod(InspectionAlignmentBuilder.RotateTableMethods) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setRotateTableName(String) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setRotateTablePcsUpdateOption(InspectionAlignmentBuilder.RotateTablePcsUpdateOptions) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setRotateTrackingPoint(boolean) - Method in interface nxopen.cam.TurningOperationBuilder

Deprecated.

Deprecated in NX8.5.0. Use CAM.TurningOperationBuilder#trackingPointStatus and CAM.TurningOperationBuilder#setTrackingPointStatus instead.

setRotateType(LinkInitialVelocity.AngularVelocityType) - Method in interface nxopen.motion.LinkInitialVelocity

License requirements: mechanisms ("MECHANISMS")
.

setRotateVector(Axis) - Method in interface nxopen.geometricutilities.ModlMotion

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setRotateVector(Direction) - Method in interface nxopen.motion.LinkInitialVelocity

License requirements: mechanisms ("MECHANISMS")
.

setRotatingArbitraryPlane(Plane) - Method in interface nxopen.features.StudioXformBuilderEx

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setRotatingArbitraryVector(Direction) - Method in interface nxopen.features.StudioXformBuilderEx

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setRotatingAxis(StudioXformBuilderEx.RotatingAxisType) - Method in interface nxopen.features.StudioXformBuilderEx

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setRotatingPivot(StudioXformBuilder.RotatingPivotType) - Method in interface nxopen.features.StudioXformBuilder

Deprecated.

Deprecated in NX8.5.0. Use StudioXformBuilderEx instead.

setRotatingPivot(StudioXformBuilderEx.RotatingPivotType) - Method in interface nxopen.features.StudioXformBuilderEx

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setRotatingPivotPoint(Point) - Method in interface nxopen.features.StudioXformBuilderEx

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setRotation(HoleBossGeom.RotationTypes) - Method in interface nxopen.cam.HoleBossGeom

License requirements: cam_base ("CAM BASE")
.

setRotation(double) - Method in interface nxopen.display.DecalBuilder

License requirements: None.

setRotation(PlotBuilder.RotationOption) - Method in interface nxopen.PlotBuilder

License requirements: None.

setRotation(Tag, double[]) - Method in interface nxopen.uf.UFView

Refer to UF_VIEW_set_rotation for documentation.

setRotationAngle(double) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setRotationAngle(double) - Method in interface nxopen.cam.ToolAxisVariable

License requirements: cam_base ("CAM BASE")
.

setRotationAngle(DynamicSectionTypes.Axis, double) - Method in interface nxopen.display.DynamicSectionBuilder

Rotates the section about specified axis by the specified angle.

setRotationAngle(double) - Method in interface nxopen.formboard.FlipComponentBuilder

Set the angle to rotate the component.

setRotationAngle(double) - Method in interface nxopen.routing.Stock

Sets the rotation angle applied to the profile.

setRotationAngle(double) - Method in interface nxopen.tooling.UserDefinedMotionBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setRotationAngleReverseDirection(boolean) - Method in interface nxopen.features.GlobalShapingBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setRotationAngleType(GlobalShapingBuilder.RotationMethod) - Method in interface nxopen.features.GlobalShapingBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setRotationArbitraryPlane(Plane) - Method in interface nxopen.features.StudioXformBuilder

Deprecated.

Deprecated in NX8.5.0. Use StudioXformBuilderEx instead.

setRotationArbitraryVector(Direction) - Method in interface nxopen.features.StudioXformBuilder

Deprecated.

Deprecated in NX8.5.0. Use StudioXformBuilderEx instead.

setRotationAxis(AxiSymmetricParameters.AxisOfRotation) - Method in interface nxopen.cae.AxiSymmetricParameters

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setRotationAxis(TranslationalNodalFunctionExcitationBuilder.RotationAxisType) - Method in interface nxopen.cae.responsesimulation.TranslationalNodalFunctionExcitationBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setRotationAxis(InspectionAlignmentBuilder.RotationAxisOptions) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setRotationAxis(Direction) - Method in interface nxopen.cam.ToolAxisVariable

License requirements: cam_base ("CAM BASE")
.

setRotationAxis(Axis) - Method in interface nxopen.features.GeomcopyBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setRotationAxis(RadialBuilder.RotationAxisType) - Method in interface nxopen.geometricanalysis.sectionanalysis.RadialBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setRotationAxis(Axis) - Method in interface nxopen.geometricutilities.CircularPattern

License requirements: None.

setRotationAxis(Axis) - Method in interface nxopen.geometricutilities.HelixPattern

License requirements: None.

setRotationAxis(Axis) - Method in interface nxopen.geometricutilities.PolygonPattern

License requirements: None.

setRotationAxisColor(NXColor) - Method in interface nxopen.cae.ModelDisplayBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setRotationAxisDisplaySwitch(boolean) - Method in interface nxopen.cae.ModelDisplayBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setRotationAxisFont(ModelDisplayBuilder.RotationAxisLineFont) - Method in interface nxopen.cae.ModelDisplayBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setRotationAxisLineWidth(ModelDisplayBuilder.RotationAxisWidth) - Method in interface nxopen.cae.ModelDisplayBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setRotationAxisOfAbsoluteCyndricalCSYS(Post.AxisymetricAxis) - Method in interface nxopen.cae.ResultParameters

Set axis of rotation for axisymmetric results
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setRotationCenter(Point) - Method in interface nxopen.geometricutilities.CircularPattern

License requirements: None.

setRotationCenter(Point) - Method in interface nxopen.geometricutilities.PolygonPattern

License requirements: None.

setRotationDatumLetter(String) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setRotationDirection(InspectionAlignmentBuilder.RotationDirections) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setRotationDirection(StudioXformBuilder.RotationDirectionType) - Method in interface nxopen.features.StudioXformBuilder

Deprecated.

Deprecated in NX8.5.0. Use StudioXformBuilderEx instead.

setRotationFeature(String) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setRotationMatrix(DynamicSectionTypes.Axis, Matrix3x3) - Method in interface nxopen.display.DynamicSectionBuilder

Sets the section rotation matrix
Specify Display.DynamicSectionTypes.Axis#NONE if the axis about which rotation was performed is not known.

setRotationMethod(InspectionAlignmentBuilder.RotationMethods) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setRotationObject(DisplayableObject) - Method in interface nxopen.routing.IAxisPort

Sets the object used to derive the rotation vector of Port
License requirements: routing_base ("Routing Basic")
.

setRotationPlane(Xform) - Method in interface nxopen.drawings.OrientationViewStyle

Sets the rotation plane.

setRotationPoint(Point) - Method in interface nxopen.drawings.RevolvedSectionLineBuilder

Deprecated.

Deprecated in NX10.0.0. Use Drawings.SectionLineSegmentsBuilder#setRotationPoint

setRotationPoint(Point) - Method in interface nxopen.drawings.SectionLineSegmentsBuilder

License requirements: None.

setRotationPointDelay(int) - Method in interface nxopen.preferences.SessionVisualizationScreen

Sets
License requirements: None.

setRotationSpeedValue(double) - Method in interface nxopen.cae.ResultProbeBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setRotationTranslationScale(Matrix3x3, Point3d, double) - Method in interface nxopen.View

Sets the rotation, translation and scale of the specified view.

setRotationType(GlobalShapingBuilder.RotationMethodType) - Method in interface nxopen.features.GlobalShapingBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setRotationType(DriverMotionsData.DriverRotationType) - Method in interface nxopen.motion.DriverMotionsData

License requirements: mechanisms ("MECHANISMS")
.

setRotationVector(Vector3d) - Method in interface nxopen.geometricanalysis.sectionanalysis.RadialBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setRotationVector(Vector3d) - Method in interface nxopen.routing.IAxisPort

Sets the rotation vector of Port
License requirements: routing_base ("Routing Basic")
.

setRotationXDirection(Direction) - Method in interface nxopen.drawings.OrientationViewStyle

Sets the rotation in x-direction for the drawing member view which stays parallel to the x-axis drawing coordinate.

setRotorAttributes(String, String, int) - Method in interface nxopen.die.RotorSectionBuilder

Sets the rotor faces attributes
License requirements: ug_die_design ("Die Design")
.

setRotorInteria(double) - Method in interface nxopen.motion.PMDCMotorBuilder

Sets the rotor interia
License requirements: nx_motion_motor ("NX Motion Motor")
.

setRotorRotationAngle(String) - Method in interface nxopen.die.RotorBuilder

License requirements: ug_die_design ("Die Design")
.

setRotorSolid(Body) - Method in interface nxopen.die.RotorBuilder

Sets the rotor solid of the rotor casting.

setRoughnessText(String) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder

License requirements: None.

setRoughnessType(SearchModelViewBuilder.TextComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder

License requirements: None.

setRoughOffset(boolean) - Method in interface nxopen.features.OffsetCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setRoughOffset(boolean) - Method in interface nxopen.tooling.ShimInnerProfileSetBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setRoughPasses(int) - Method in interface nxopen.cam.WedmBasedGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setRoundCrossLinesPosition(boolean) - Method in interface nxopen.tooling.ElectrodeBlankBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setRoundDimensionValue(boolean) - Method in interface nxopen.tooling.WorkpieceBuilder

License requirements: None.

setRoundFeetAndInches(boolean) - Method in interface nxopen.drafting.AutomationRuleBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setRounding(boolean) - Method in interface nxopen.cam.RoundPointBuilder

License requirements: None.

setRoundPosition(boolean) - Method in interface nxopen.tooling.ElectrodeDeleteBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setRoundPrecision(double) - Method in interface nxopen.tooling.WorkpieceBuilder

License requirements: None.

setRoundTip(boolean) - Method in interface nxopen.tooling.CoolingExtendBuilder

License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setRouteCornerBendMethods(CornerTypeBuilder.BendMethods) - Method in interface nxopen.routing.CornerTypeBuilder

License requirements: routing_base ("Routing Basic")
.

setRouteCornerBendOptions(CornerTypeBuilder.BendOptions) - Method in interface nxopen.routing.CornerTypeBuilder

Deprecated.

Deprecated in NX8.5.0. Use CornerTypeBuilder.setRouteCornerBendMethods(nxopen.routing.CornerTypeBuilder.BendMethods) instead.

setRouteCornerBendTable(String) - Method in interface nxopen.routing.CornerTypeBuilder

Sets the name of bend radius table
License requirements: routing_base ("Routing Basic")
.

setRouteCornerNumberOfMiters(int) - Method in interface nxopen.routing.CornerTypeBuilder

Sets the number of miter in mitered bend corner
License requirements: routing_base ("Routing Basic")
.

setRouteCornerRequireLinearSolution(boolean) - Method in interface nxopen.routing.CornerTypeBuilder

License requirements: routing_base ("Routing Basic")
.

setRouteCornerTypeOptions(CornerTypeBuilder.Type) - Method in interface nxopen.routing.CornerTypeBuilder

License requirements: routing_base ("Routing Basic")
.

setRoutedCondition(boolean) - Method in interface nxopen.routing.RouteLogicalAssociation

Set the routed condition of a logical association object The routed condition evaluates the state of the control object.

setRouteStockPickColor(NXColor) - Method in interface nxopen.routing.StockColorBuilder

License requirements: routing_harness ("Routing Harness")
.

setRoutingLevel(String) - Method in interface nxopen.routing.EditCharacteristicsBuilder

Sets the Routing Level associated with selected objects.

setRoutingObjects(NXObject[]) - Method in interface nxopen.routing.RoutingMeasureDistanceBuilder

The routing objects used for path length
License requirements: None.

setRoutingSelection(RouteObjectCollector) - Method in interface nxopen.routing.RoutingMeasureDistanceBuilder

License requirements: None.

setRoutingSubsetAsWorkPart() - Method in interface nxopen.assemblies.MechanicalRoutingSubsetBuilder

The builder may generate multiple subsets.

setRowCount(int) - Method in interface nxopen.ITableEditorDataProvider

Sets the number of rows in the table
License requirements: None.

setRowDeepNumber(int) - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setRowHeadCfw(Tag, int[]) - Method in interface nxopen.uf.UFTabnot

Refer to UF_TABNOT_set_row_head_cfw for documentation.

setRowHeight(double) - Method in interface nxopen.annotations.TableSectionBuilder

License requirements: drafting ("DRAFTING")
.

setRowHeight(Tag, double) - Method in interface nxopen.uf.UFTabnot

Refer to UF_TABNOT_set_row_height for documentation.

setRowHeigths(double[]) - Method in interface nxopen.openxml.TableDocumentData

Sets the height array of the rows
License requirements: None.

setRowLock(Tag, boolean) - Method in interface nxopen.uf.UFPlist

Refer to UF_PLIST_set_row_lock for documentation.

setRowNumber(String) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder

License requirements: None.

setRowSpacingDouble(double) - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setRowTitles(String[]) - Method in interface nxopen.blockstyler.DoubleTable

Sets the titles of rows in table
License requirements: None.

setRowTitles(String[]) - Method in interface nxopen.blockstyler.IntegerTable

Sets the RowTitles
License requirements: None.

setRP1Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setRP1LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setRP1Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setRP1RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setRP2Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setRP2Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarWizardBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setRP2LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setRP2Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setRP2Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarWizardBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setRP2RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setRPillarFeature(HeadImpactRPillar) - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setRpmValue(double) - Method in interface nxopen.cae.AfuZHeaderInfo

Sets the value of RPM field
License requirements: nx_ftk ("NX Advanced Graphing")
.

setRpoDimensions(RPODimension[]) - Method in interface nxopen.features.RPOBuilder

Sets the list of RPO dimemsions
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.

setRpoRefernce(Tag, double[], int) - Method in interface nxopen.uf.UFModlUi

Refer to UF_MODL_set_rpo_refernce for documentation.

setRule(String) - Method in interface nxopen.annotations.MasterSymbolListItemBuilder

License requirements: nx_layout ("NX Layout")
.

setRule(String) - Method in interface nxopen.drafting.SpecifyRuleBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setRuleApplication(Tag, String) - Method in interface nxopen.uf.UFRule

Deprecated.

The equivalent Open C method has retired

setRuleCheckFunction(Tag, Tag) - Method in interface nxopen.uf.UFRule

Deprecated.

The equivalent Open C method has retired

setRuleCondition(String) - Method in interface nxopen.cam.Teaching

Sets the rule conditions
License requirements: fbm_author ("FBM Author")
.

setRuleDescription(Tag, String) - Method in interface nxopen.uf.UFRule

Deprecated.

The equivalent Open C method has retired

setRuleInputs(String[], String[]) - Method in interface nxopen.features.shipdesign.SteelFeatureSpreadsheetBuilder

This method sets the rule inputs.

setRuleLibraries(String[]) - Method in interface nxopen.cam.FeatureProcessBuilder

Sets the active rule libraries
License requirements: ug_holemaking ("UG Holemaking")
.

setRuleLibraryPath(String) - Method in interface nxopen.cam.Teaching

Sets the selected rule library path
License requirements: fbm_author ("FBM Author")
.

setRuleMatchOptions(FeatureTeaching.RuleMatchOptionType) - Method in interface nxopen.cam.FeatureTeaching

License requirements: fbm_author ("FBM Author")
.

setRuleName(Tag, String) - Method in interface nxopen.uf.UFRule

Deprecated.

The equivalent Open C method has retired

setRulePath(String) - Method in interface nxopen.cam.FeatureTeaching

Sets the selected rule path
License requirements: fbm_author ("FBM Author")
.

setRulePath(String) - Method in interface nxopen.cam.Teaching

Sets the selected rule path
License requirements: fbm_author ("FBM Author")
.

setRulePriority(double) - Method in interface nxopen.cam.Teaching

Sets the selected rule priority
License requirements: fbm_author ("FBM Author")
.

setRules(String[]) - Method in interface nxopen.drawings.DrawingRegionRulesBuilder

Set Rules
License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setRules(Sketch.AutoDimensioningRule[]) - Method in interface nxopen.InferredConstraintsBuilder

Set the auto dimensioning rule list to builder
License requirements: None.

setRules(Sketch.AutoDimensioningRule[]) - Method in interface nxopen.SketchAutoDimensionBuilder

Set the auto dimensioning rule list to builder.

setRulesList(String[]) - Method in interface nxopen.drafting.AutomationPreferencesBuilder

Set the ordered rules list
License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setRulesList(String[]) - Method in interface nxopen.drafting.AutomationRuleBuilder

The set of order list
License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setRuleViolations(Tag, int, Tag[]) - Method in interface nxopen.uf.UFRule

Deprecated.

The equivalent Open C method has retired

setRulingType(ToolAxisVariable.RulingTypes) - Method in interface nxopen.cam.ToolAxisVariable

License requirements: cam_base ("CAM BASE")
.

setRunAttributes(IntegrateRunsBuilder.Enum) - Method in interface nxopen.routing.IntegrateRunsBuilder

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setRunClearanceAnalysis(boolean) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setRunId(Tag, String) - Method in interface nxopen.uf.UFRouteRun

Refer to UF_ROUTE_RUN_set_run_id for documentation.

setRunIdentifier(String) - Method in interface nxopen.routing.DefineRunBuilder

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setRunInParallel(boolean) - Method in interface nxopen.motion.TirePropertyFtBuilder

License requirements: mechanisms ("MECHANISMS")
.

setRunMode(SIZERExportBuilder.RunMode) - Method in interface nxopen.tooling.SIZERExportBuilder

Sets the run mode.

setRunName(String) - Method in interface nxopen.routing.IntegrateRunsBuilder

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setRunName(String) - Method in interface nxopen.routing.SplitRunBuilder

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setRunoffDepth(double) - Method in interface nxopen.die.KeywayChildBuilder

Sets the runoff depth of the keyway.

setRunoffDepth(double) - Method in interface nxopen.die.KeywayParentBuilder

Sets the runoff depth of keyways.

setRunoffDiameter(double) - Method in interface nxopen.die.KeywayChildBuilder

Sets the runoff diameter of the keyway.

setRunoffDiameter(double) - Method in interface nxopen.die.KeywayParentBuilder

Sets the runoff diameter of keyways.

setRunoffLength(double) - Method in interface nxopen.die.KeywayChildBuilder

Sets the runoff length of the keyway.

setRunoffLength(double) - Method in interface nxopen.die.KeywayParentBuilder

Sets the runoff length of keyways.

setRunoffType(KeywayChildBuilder.RunoffTypeOption) - Method in interface nxopen.die.KeywayChildBuilder

Sets the runoff type of the keyway.

setRunoffType(KeywayParentBuilder.RunoffTypeOption) - Method in interface nxopen.die.KeywayParentBuilder

Sets the runoff type of keyways.

setRunoffWidth(double) - Method in interface nxopen.die.KeywayChildBuilder

Sets the runoff width of the keyway.

setRunoffWidth(double) - Method in interface nxopen.die.KeywayParentBuilder

Sets the runoff width of keyways.

setRunout(AeroJoggleBuilder.SideType, String) - Method in interface nxopen.features.sheetmetal.AeroJoggleBuilder

Set the runout expression.

setRunProcessAssistant(boolean) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setRunsToDrawTypesEnum(IsoDrawingBuilder.RunsToDrawTypes) - Method in interface nxopen.routing.IsoDrawingBuilder

License requirements: None.

setRunTest(boolean) - Method in interface nxopen.cae.optimization.TBSTestFunction

License requirements: cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setRuntimePropertyTag(int) - Method in interface nxopen.mechatronics.RuntimeFormulaParameterBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setRunType(String) - Method in interface nxopen.routing.DefineRunBuilder

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setRunType(Tag, String) - Method in interface nxopen.uf.UFRouteRun

Refer to UF_ROUTE_RUN_set_run_type for documentation.

setRValue(double) - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setRx(InspectionAnalyzeBuilder.DofTypes) - Method in interface nxopen.cam.InspectionAnalyzeBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setRxLower(double) - Method in interface nxopen.cam.InspectionAnalyzeBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setRxUpper(double) - Method in interface nxopen.cam.InspectionAnalyzeBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setRy(InspectionAnalyzeBuilder.DofTypes) - Method in interface nxopen.cam.InspectionAnalyzeBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setRyLower(double) - Method in interface nxopen.cam.InspectionAnalyzeBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setRyUpper(double) - Method in interface nxopen.cam.InspectionAnalyzeBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setRz(InspectionAnalyzeBuilder.DofTypes) - Method in interface nxopen.cam.InspectionAnalyzeBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setRzLower(double) - Method in interface nxopen.cam.InspectionAnalyzeBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setRzUpper(double) - Method in interface nxopen.cam.InspectionAnalyzeBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

sets - Variable in class nxopen.uf.UFModeling.AskSetsOfMemberData

setSAEPercentile(ManikinBuilder.SAEPercentileType) - Method in interface nxopen.features.vehicledesign.ManikinBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSafeClearance(double) - Method in interface nxopen.cam.GeometrySet

License requirements: cam_base ("CAM BASE")
.

setSafeClearance(double) - Method in interface nxopen.cam.SurfaceDriveGeometrySet

License requirements: cam_base ("CAM BASE")
.

setSafeDistance(double) - Method in interface nxopen.cam.NcmClearanceBuilder

License requirements: cam_base ("CAM BASE")
.

setSafeDistance(double) - Method in interface nxopen.cam.RoughTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setSafeDistance(double) - Method in interface nxopen.cam.TurnEngageRetractBuilder

License requirements: cam_base ("CAM BASE")
.

setSafePlane(NXObject) - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSafePlaneXform(NXObject) - Method in interface nxopen.cam.InspectionPathBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSafetyClass(String) - Method in interface nxopen.annotations.SafetyClassBusinessModifierBuilder

License requirements: geometric_tol ("GDT")
.

setSafetyFactor(double) - Method in interface nxopen.cae.LaminateGraphicalReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setSafetyFactor(double) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setSafetyMargin(boolean) - Method in interface nxopen.cae.LaminateGraphicalReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setSafetyMargin(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setSafetyMarginFromFlc(double) - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setSafetyMarginRule(LaminateGraphicalReportBuilder.EnvelopeRule) - Method in interface nxopen.cae.LaminateGraphicalReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setSafetyMarginRule(LaminateSpreadsheetReportBuilder.EnvelopeRule) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setSamcefSolidShells(boolean) - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setSamcefSolidShells(boolean) - Method in interface nxopen.cae.LaminateFillSetupBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setSameEndOffsets(boolean) - Method in interface nxopen.cae.BeamSectionOffsetOptions

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setSameParent(boolean) - Method in interface nxopen.tooling.ElectrodeCheckingBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setSameTransition(boolean) - Method in interface nxopen.features.AestheticFaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setSameWithPlate(boolean) - Method in interface nxopen.tooling.FormingInsertBuilder

License requirements: None.

setSampleDensityIndex(int) - Method in interface nxopen.die.TrimLineDevelopmentBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setSampleDistance(double) - Method in interface nxopen.features.SectionCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSampleDistance(double) - Method in interface nxopen.geometricutilities.CombOptionsBuilder

License requirements: None.

setSampleNumber(int) - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSamplePoints(int) - Method in interface nxopen.features.ConcaveFacesBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSandwichBottomSkinMeshOption(int) - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setSandwichInflation(boolean) - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setSandwichNumCoreElementLayers(int) - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setSandwichTopSkinMeshOption(int) - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setSaProject(String) - Method in interface nxopen.features.shipdesign.ManufacturingPreparationBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setSaProject(String) - Method in interface nxopen.features.shipdesign.SteelDistributionBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setSave2dIpw(boolean) - Method in interface nxopen.cam.PlanarMillingBuilder

License requirements: cam_base ("CAM BASE")
.

setSaveAdvancedDisplayFacets(boolean) - Method in interface nxopen.preferences.PartVisualizationPerformance

License requirements: None.

setSaveAfuOption(boolean) - Method in interface nxopen.cae.PostGraphBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setSaveAllIterationResults(boolean) - Method in interface nxopen.cae.optimization.DAOStopCondition

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setSaveAs(ExportPlantToDWGBuilder.SaveAsType) - Method in interface nxopen.linedesigner.ExportPlantToDWGBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setSaveAs(ExportToDWGBuilder.SaveAsTypeAPI) - Method in interface nxopen.linedesigner.ExportToDWGBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setSaveAsAction(DesignElementBuilder.SaveAsActionType) - Method in interface nxopen.assemblies.DesignElementBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setSaveAsLocation(String) - Method in interface nxopen.drawings.ConversionProcessSettingsBuilder

License requirements: convert_to_pmi (" Convert To PMI"), drafting ("DRAFTING")
.

setSaveAsName(String) - Method in interface nxopen.features.MasterCutBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSaveAsPartfile(boolean) - Method in interface nxopen.cam.SimulationOptionsBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setSaveAssociativeCurves(boolean) - Method in interface nxopen.annotations.LightweightSectionBuilder

License requirements: geometric_tol ("GDT")
.

setSaveComponentPartFilesDuringLoad(boolean) - Method in interface nxopen.preferences.SessionNXGateway

Sets the save component part files flag during load for I-DEAS
License requirements: None.

setSaveConstraints(boolean) - Method in interface nxopen.geometricutilities.SaveConstraintsBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSaveContactDisplayDataFlag(boolean) - Method in interface nxopen.cam.OperationDisplayOptionsBuilder

License requirements: cam_base ("CAM BASE")
.

setSaveDataForFeatureEdit(SessionModeling.SaveDataForFeatureEditOption) - Method in interface nxopen.preferences.SessionModeling

Sets the option "Save Data for Feature Edit" specifies what additional data will be saved in the part to enhance feature edit.

setSaveDestination(VisualReport.SaveDestinationOption) - Method in interface nxopen.visualreporting.VisualReport

License requirements: nx_visual_reporting ("Visual Reporting")
.

setSaveDestination(VisualReport.SaveDestinationOption) - Method in interface nxopen.visualreporting.VisualReportBuilder

License requirements: None.

setSaveDid(String) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSavedInOriginalPart(boolean) - Method in interface nxopen.tooling.ReusableObject

License requirements: None.

setSaveDirectory(String) - Method in interface nxopen.partfamily.TemplateManager

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSaveDisplayFacets(boolean) - Method in interface nxopen.BasePart

License requirements: None.

setSaveDmlDidLabel(String) - Method in interface nxopen.cam.InspectionCmmCommandBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSaveDmlPcsLabel(String) - Method in interface nxopen.cam.InspectionCmmCommandBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSaveDmlPointData(boolean) - Method in interface nxopen.cam.InspectionCmmCommandBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSaveDmlVersion(String) - Method in interface nxopen.cam.InspectionCmmCommandBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSaveFaceColors(boolean) - Method in interface nxopen.cam.NCAssistantBuilder

License requirements: cam_base ("CAM BASE")
.

setSaveFlag(CutterExport.SaveFlags) - Method in interface nxopen.cam.CutterExport

License requirements: None.

setSaveGeometry(boolean) - Method in interface nxopen.cae.DurabilityEventSolverBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setSaveGeometry(boolean) - Method in interface nxopen.cae.DurabilitySolverBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setSaveInterferenceGeometry(boolean) - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setSaveIpwModel(boolean) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setSaveLayoutAtExit(boolean) - Method in interface nxopen.preferences.SessionUserInterfaceUI

Sets the save layout at exit flag.

setSaveLevelBasedIpw(boolean) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setSaveMasterPart(boolean) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSaveName(String) - Method in interface nxopen.gateway.BaseExplicitOrderBuilder

License requirements: None.

setSavePartFile(ValidatorOptions.SaveModeTypes) - Method in interface nxopen.validate.ValidatorOptions

License requirements: None.

setSavePcsLabel(String) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSaveRelation(boolean) - Method in interface nxopen.features.MakeOffsetBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setSaveResultInPart(boolean) - Method in interface nxopen.validate.ValidatorOptions

License requirements: None.

setSaveResultInTeamcenter(ValidatorOptions.SaveModeTypes) - Method in interface nxopen.validate.ValidatorOptions

License requirements: None.

setSaveResultsInPart(boolean) - Method in interface nxopen.tooling.ElectrodeCheckingBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setSaveResultsToTeamcenterOption(RequirementCheck.SaveResultsToTeamcenterOptions) - Method in interface nxopen.validate.RequirementCheck

License requirements: None.

setSaveRollbackData(boolean) - Method in interface nxopen.preferences.SessionModeling

Deprecated.

Deprecated in NX10.0.0. Use SessionModeling.setSaveDataForFeatureEdit(nxopen.preferences.SessionModeling.SaveDataForFeatureEditOption) instead.

setSaveScenario(boolean) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSaveSetting(boolean) - Method in interface nxopen.tooling.PocketBuilder

License requirements: None.

setSaveState(InspectionAlignmentBuilder.SaveStates) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSaveTrueshape(boolean) - Method in interface nxopen.uf.UFAssem

Refer to UF_ASSEM_set_save_trueshape for documentation.

setSaveXmlTransform(boolean) - Method in interface nxopen.cae.CorrelAlignmentBuilder

License requirements: nx_correl_base ("FE Correlation")
.

setSBendData(int, ControlPoint, ControlPoint, SplineSegment, double, boolean) - Method in interface nxopen.routing.SBendCorner

Set the data for the S-Bend object
License requirements: routing_base ("Routing Basic")
.

setScalarArrayPropertyValue(String, double[]) - Method in interface nxopen.BasePropertyTable

Sets the scalar array value of the property.

setScalarArrayWithUnitsPropertyValue(String, double[], Unit) - Method in interface nxopen.BasePropertyTable

Sets the scalar array and unit value of the property
License requirements: None.

setScalarFactor(double) - Method in interface nxopen.cae.responsesimulation.FunctionComponentData

License requirements: nx_response_anlys ("NX Response Analysis")
.

setScalarFieldPropertyValue(String, FieldExpression) - Method in interface nxopen.cae.PropertyTable

Sets the field expression FieldExpression value of the property
License requirements: None.

setScalarFieldWrapperByIndex(int, int, String, ScalarFieldWrapper) - Method in interface nxopen.BasePropertyTable

Sets the scalar field wrapper ScalarFieldWrapper
License requirements: None.

setScalarFieldWrapperPropertyValue(String, ScalarFieldWrapper) - Method in interface nxopen.BasePropertyTable

Sets the scalar field wrapper ScalarFieldWrapper
License requirements: None.

setScalarForce(Tag, UFMotion.ScalarForceTorque) - Method in interface nxopen.uf.UFMotion

Refer to UF_MOTION_set_scalar_force for documentation.

setScalarPropertyValue(String, Expression) - Method in interface nxopen.BasePropertyTable

Sets the expression Expression value of the property Use BasePropertyTable.setBaseScalarWithDataPropertyValue(java.lang.String, double, nxopen.Unit) for a constant value when an expression Expression is not needed.

setScalarTablePropertyValue(String, ScalarTableValue) - Method in interface nxopen.BasePropertyTable

Set a scalar table value from the scalar table value of the property
License requirements: None.

setScalarTorque(Tag, UFMotion.ScalarForceTorque) - Method in interface nxopen.uf.UFMotion

Refer to UF_MOTION_set_scalar_torque for documentation.

setScalarWithDataPropertyValue(String, double, Unit) - Method in interface nxopen.cae.PropertyTable

Sets the the Scalar property as a constant double value with units.

setScalarWithDataPropertyValue(String, String, Unit) - Method in interface nxopen.cae.PropertyTable

Sets the the Scalar property as a string value with units.

setScale(double) - Method in interface nxopen.annotations.BalloonNoteBuilder

Sets the scale
License requirements: None.

setScale(double) - Method in interface nxopen.annotations.CustomSymbolData

Deprecated.

Deprecated in NX9.0.0. Use DraftingCustomSymbolBuilder for Drafting Custom Symbol and PmiCustomSymbolBuilder for PMI Custom Symbol objects.

setScale(double) - Method in interface nxopen.annotations.HatchBuilder

Deprecated.

Deprecated in NX7.5.0. Use HatchFillSettingsBuilder instead.

setScale(double) - Method in interface nxopen.annotations.HatchFillSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setScale(double) - Method in interface nxopen.annotations.LineWeldBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setScale(int) - Method in interface nxopen.cae.CaeDOFSetDisplay

Sets the DOF Set display scaling factor this option specifies the scale of the graphic symbol relative to the size of the bounding box of the FE model.

setScale(double) - Method in interface nxopen.cae.CrossSectionParameters

Set scale.

setScale(double) - Method in interface nxopen.cae.DeformationParameters

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setScale(int, double) - Method in interface nxopen.cae.DurabilityDamageEvaluationBuilder

Sets the scale.

setScale(double) - Method in interface nxopen.cae.DurabilityFunctionExcitationBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setScale(double) - Method in interface nxopen.cae.DurabilityLoadPatternBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setScale(int, double) - Method in interface nxopen.cae.DurabilityResultPathBuilder

Sets the scale for a loadcase by index.

setScale(double) - Method in interface nxopen.cae.optimization.TBSShapeOptimizationParameters

License requirements: cae_opt_toposhape ("NX Shape Optimization")
.

setScale(double) - Method in interface nxopen.cae.ResultParameters

Set scale.

setScale(int) - Method in interface nxopen.cae.SimBCDisplay

Sets the BC display scaling factor this option specifies the scale of the graphic symbol relative to the size of the bounding box of the FE model.

setScale(double) - Method in interface nxopen.cae.ThicknessBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setScale(double) - Method in interface nxopen.CGMBuilder

License requirements: None.

setScale(double) - Method in interface nxopen.display.DecalBuilder

License requirements: None.

setScale(double) - Method in interface nxopen.display.IrayPlusSimpleMaterialEditorBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setScale(double) - Method in interface nxopen.drawings.GeneralViewStyle

Sets the scale of a member view.

setScale(boolean) - Method in interface nxopen.drawings.ViewStyleDetailBuilder

License requirements: drafting ("DRAFTING")
.

setScale(boolean) - Method in interface nxopen.drawings.ViewStyleProjectedBuilder

License requirements: drafting ("DRAFTING")
.

setScale(boolean) - Method in interface nxopen.drawings.ViewStyleSectionConstraintsBuilder

License requirements: drafting ("DRAFTING")
.

setScale(double) - Method in interface nxopen.geometricanalysis.DupinBuilder

License requirements: None.

setScale(double) - Method in interface nxopen.PartImporter

Sets the scale.

setScale(double) - Method in interface nxopen.PrintPDFBuilder

License requirements: None.

setScale(Tag, double) - Method in interface nxopen.uf.UFView

Refer to UF_VIEW_set_scale for documentation.

setScale(double) - Method in interface nxopen.View

Sets the scale of the specified view to the desired scale factor.

setScale(double) - Method in interface nxopen.Xform

Sets the scale
License requirements: None.

setScaleAndAspectRatio(double, double) - Method in interface nxopen.annotations.UserSymbolPreferences

Sets the scale and aspect ratio
License requirements: None.

setScaleCharacterHeightFactor(double) - Method in interface nxopen.drawings.ViewDetailLabelBuilder

License requirements: drafting ("DRAFTING")
.

setScaleCharacterHeightFactor(double) - Method in interface nxopen.drawings.ViewLabelBuilder

License requirements: drafting ("DRAFTING")
.

setScaleCharacterHeightFactor(double) - Method in interface nxopen.drawings.ViewSectionLabelBuilder

License requirements: drafting ("DRAFTING")
.

setScaleDenominator(double) - Method in interface nxopen.drawings.DrawingSheetBuilder

License requirements: drafting ("DRAFTING")
.

setScaleDenominator(double) - Method in interface nxopen.features.shipdesign.ExpansionDrawingBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setScaleEnum(int) - Method in interface nxopen.linedesigner.InsertSheetBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setScaleExpression(Expression) - Method in interface nxopen.annotations.CustomSymbolData

Deprecated.

Deprecated in NX9.0.0. Use DraftingCustomSymbolBuilder for Drafting Custom Symbol and PmiCustomSymbolBuilder for PMI Custom Symbol objects.

setScaleFactor(double) - Method in interface nxopen.cae.NodeTranslateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setScaleFactor(double) - Method in interface nxopen.cae.PostAnnotationPreference

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setScaleFactor(double) - Method in interface nxopen.cam.InspectionGraphicalReportOutputBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setScaleFactor(double) - Method in interface nxopen.cam.InspectionOperationTransformBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setScaleFactor(double) - Method in interface nxopen.cam.OperationTransformBuilder

License requirements: cam_base ("CAM BASE")
.

setScaleFactor(double) - Method in interface nxopen.cam.WorkInstructionOutputBuilder

License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.

setScaleFactor(double) - Method in interface nxopen.features.LocalScaleCurveBuilder

License requirements: None.

setScaleFactor(double) - Method in interface nxopen.geometricutilities.CombOptionsBuilder

License requirements: None.

setScaleFactor(double) - Method in interface nxopen.geometricutilities.ScalingMethodBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setScaleFactor(double) - Method in interface nxopen.tooling.StripLayoutStationInformationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setScaleLabel(boolean) - Method in interface nxopen.drawings.GeneralViewStyle

Sets the display of scale label.

setScaleLabel(boolean) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder

License requirements: drafting ("DRAFTING")
.

setScaleLimits(boolean) - Method in interface nxopen.blockstyler.DoubleBlock

License requirements: None.

setScaleLimits(boolean) - Method in interface nxopen.blockstyler.IntegerBlock

License requirements: None.

setScaleMaxLimitLabel(String) - Method in interface nxopen.blockstyler.DoubleBlock

License requirements: None.

setScaleMaxLimitLabel(String) - Method in interface nxopen.blockstyler.IntegerBlock

License requirements: None.

setScaleMinLimitLabel(String) - Method in interface nxopen.blockstyler.DoubleBlock

License requirements: None.

setScaleMinLimitLabel(String) - Method in interface nxopen.blockstyler.IntegerBlock

License requirements: None.

setScaleModified(boolean) - Method in interface nxopen.tooling.AssemblyDrawingBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setScaleNumerator(double) - Method in interface nxopen.drawings.DrawingSheetBuilder

License requirements: drafting ("DRAFTING")
.

setScaleNumerator(double) - Method in interface nxopen.features.shipdesign.ExpansionDrawingBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setScaleOfXform(Tag, double) - Method in interface nxopen.uf.UFSo

Refer to UF_SO_set_scale_of_xform for documentation.

setScaleOnFirstDrivingDimension(boolean) - Method in interface nxopen.preferences.SessionSketch

Sets the scale on first driving dimension option
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setScaleOrigin(Point3d) - Method in interface nxopen.features.LocalScaleCurveBuilder

License requirements: None.

setScalePosition(ScalePositionTypes) - Method in interface nxopen.drawings.ViewDetailLabelBuilder

License requirements: drafting ("DRAFTING")
.

setScalePosition(ScalePositionTypes) - Method in interface nxopen.drawings.ViewLabelBuilder

License requirements: drafting ("DRAFTING")
.

setScalePosition(ScalePositionTypes) - Method in interface nxopen.drawings.ViewSectionLabelBuilder

License requirements: drafting ("DRAFTING")
.

setScalePrefix(String) - Method in interface nxopen.drawings.ViewDetailLabelBuilder

License requirements: drafting ("DRAFTING")
.

setScalePrefix(String) - Method in interface nxopen.drawings.ViewLabelBuilder

License requirements: drafting ("DRAFTING")
.

setScalePrefix(String) - Method in interface nxopen.drawings.ViewSectionLabelBuilder

License requirements: drafting ("DRAFTING")
.

setScaleSpeed(double) - Method in interface nxopen.geometricutilities.PlayButtonsBuilder

License requirements: None.

setScaleStep(double) - Method in interface nxopen.geometricutilities.PlayButtonsBuilder

License requirements: None.

setScaleType(ViewScaleBuilder.Type) - Method in interface nxopen.drawings.ViewScaleBuilder

License requirements: drafting ("DRAFTING")
.

setScaleType(ScaleCurveBuilder.ScaleCurveType) - Method in interface nxopen.features.ScaleCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setScaleType(FaceCurvatureAnalysisBuilder.ScaleTypes) - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setScalingArbitraryPlane(Plane) - Method in interface nxopen.features.StudioXformBuilder

Deprecated.

Deprecated in NX8.5.0. Use StudioXformBuilderEx instead.

setScalingArbitraryPlane(Plane) - Method in interface nxopen.features.StudioXformBuilderEx

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setScalingArbitraryVector(Direction) - Method in interface nxopen.features.StudioXformBuilder

Deprecated.

Deprecated in NX8.5.0. Use StudioXformBuilderEx instead.

setScalingArbitraryVector(Direction) - Method in interface nxopen.features.StudioXformBuilderEx

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setScalingCenter(StudioXformBuilder.ScalingCenterType) - Method in interface nxopen.features.StudioXformBuilder

Deprecated.

Deprecated in NX8.5.0. Use StudioXformBuilderEx instead.

setScalingCenter(StudioXformBuilderEx.ScalingCenterType) - Method in interface nxopen.features.StudioXformBuilderEx

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setScalingCenterPoint(Point) - Method in interface nxopen.features.StudioXformBuilderEx

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setScalingDirection(StudioXformBuilder.ScalingDirectionType) - Method in interface nxopen.features.StudioXformBuilder

Deprecated.

Deprecated in NX8.5.0. Use StudioXformBuilderEx instead.

setScalingDirection(StudioXformBuilderEx.ScalingDirectionType) - Method in interface nxopen.features.StudioXformBuilderEx

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setScalingMethod(SubdivisionExtrudeCageBuilder.ScalingMethodType) - Method in interface nxopen.features.subdivision.SubdivisionExtrudeCageBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setScalingMethod(TransformCageData.ScalingMethodType) - Method in interface nxopen.features.subdivision.TransformCageData

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setScalingMethod(SectionAnalysisBuilder.ScalingMethodType) - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setScalingMethod(SectionAnalysisExBuilder.ScalingMethodType) - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setScalingMethod(SurfaceIntersectionBuilder.ScalingTypes) - Method in interface nxopen.geometricanalysis.SurfaceIntersectionBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setScalingMethodOption(StyledSweepBuilder.ScalingMethodOptions) - Method in interface nxopen.features.StyledSweepBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setScalingOption(ScalingMethodBuilder.ScalingOptions) - Method in interface nxopen.geometricutilities.ScalingMethodBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setScalingPoint(Point) - Method in interface nxopen.geometricutilities.ScalingMethodBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setScalingType(CorrelAlignmentBuilder.ScalingChoice) - Method in interface nxopen.cae.CorrelAlignmentBuilder

License requirements: nx_correl_base ("FE Correlation")
.

setScalingType(DecalBuilder.Scaling) - Method in interface nxopen.display.DecalBuilder

License requirements: None.

setScalingValue(double) - Method in interface nxopen.cae.CorrelAlignmentBuilder

License requirements: nx_correl_base ("FE Correlation")
.

setScanCurveMode(InspectionMethodBuilder.ScanCurveModeTypes) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setScanForce(double) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setScanModeType(InspectionMethodBuilder.ScanModeTypes) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setScanModeType(InspectionMethodBuilder.ScanModeTypes) - Method in interface nxopen.cam.InspectionScanArcBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setScanModeType(InspectionMethodBuilder.ScanModeTypes) - Method in interface nxopen.cam.InspectionScanHelixBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setScanModeType(InspectionMethodBuilder.ScanModeTypes) - Method in interface nxopen.cam.InspectionScanLineBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setScanSpeed(double) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setScantlingSplitSystem(boolean) - Method in interface nxopen.features.shipdesign.SeamBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setScatter(boolean) - Method in interface nxopen.assemblies.DesignElementBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setScenarioDescriptor(PostScenarioDescriptor) - Method in interface nxopen.cae.PostScenarioParameters

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setScenarioName(String) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSceneDescription(String[]) - Method in interface nxopen.display.ExtractScene

Sets the scene description
License requirements: None.

setSceneImageOption(ReflectionAnalysisBuilder.SceneImageType) - Method in interface nxopen.geometricanalysis.ReflectionAnalysisBuilder

License requirements: None.

setSceneName(String) - Method in interface nxopen.display.ExtractScene

License requirements: None.

setScope(HoleTableSettingsHoleFiltersBuilder.ScopeType) - Method in interface nxopen.annotations.HoleTableSettingsHoleFiltersBuilder

License requirements: drafting ("DRAFTING")
.

setScope(TableColumnBuilder.ScopeType) - Method in interface nxopen.annotations.TableColumnBuilder

License requirements: drafting ("DRAFTING")
.

setScope(ShipFeatureConverter.PartScope) - Method in interface nxopen.features.shipdesign.ShipFeatureConverter

License requirements: nx_ship_concept ("Ship Concept")
.

setScopeEnum(InspectionLinkPmiBuilder.PmiScopeTypes) - Method in interface nxopen.cam.InspectionLinkPmiBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setScopeTypeOfVisualReport(VisualReport.ScopeTypeOption) - Method in interface nxopen.visualreporting.VisualReportBuilder

License requirements: None.

setScrapCutters(ISurface[]) - Method in interface nxopen.die.TrimTaskBuilder

Sets the scrap cutters of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.

setScrapMethod(ScrapDesignBuilder.ScrapDefType) - Method in interface nxopen.tooling.ScrapDesignBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setScrapPosition(ScrapDesignBuilder.ScrapDefPosition) - Method in interface nxopen.tooling.ScrapDesignBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setScrapTol(double) - Method in interface nxopen.tooling.ScrapDesignBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setScrapTypeEnum(ScrapDesignBuilder.Body) - Method in interface nxopen.tooling.ScrapDesignBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setScreenTextSize(TransientText.TextSize) - Method in interface nxopen.display.TransientText

Sets the approximate size of the text (small, mendium, large) as measured on the graphics screen.

setScrewCheck(boolean) - Method in interface nxopen.tooling.ValidCheckBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setScrewClearanceEndChamferEnabled(boolean) - Method in interface nxopen.features.HolePackageBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setScrewClearanceEndChamferEnabled(boolean) - Method in interface nxopen.geometricutilities.EndHoleData

License requirements: solid_modeling ("SOLIDS MODELING")
.

setScrewClearanceHoleForm(HolePackageBuilder.HoleForms) - Method in interface nxopen.features.HolePackageBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setScrewClearanceReliefEnabled(boolean) - Method in interface nxopen.features.HolePackageBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setScrewClearanceStartChamferEnabled(boolean) - Method in interface nxopen.features.HolePackageBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setScrewClearanceStartChamferEnabled(boolean) - Method in interface nxopen.geometricutilities.EndHoleData

License requirements: solid_modeling ("SOLIDS MODELING")
.

setScrewFitOption(String) - Method in interface nxopen.features.HolePackageBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setScrewRatio(double) - Method in interface nxopen.motion.JointDefine

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using Motion.JointDefine#screwRatioExpression to query or edit it.

setScrewSeatAlignmentVector(Vector3d) - Method in interface nxopen.routing.PlacePartBuilder

Sets the alignment vector, primary axis direction for a stock, reducer, elbow, etc. along the part the screw seat is placed to align the screw seat.

setScrewSeatEnd(Point3d) - Method in interface nxopen.routing.PlacePartBuilder

Sets a point in builder, which is required for final placement of screw seat.

setScrewSeatIntersectionPoint(Point3d) - Method in interface nxopen.routing.PlacePartBuilder

Sets the final position of screw seat.

setScrewSeatPlacement(TaggedObject, TaggedObject, Point3d, Point3d, Expression, Expression) - Method in interface nxopen.routing.PlacePartBuilder

Sets the input parameters to be used for measurement holder screw seats.

setScrewSize(String) - Method in interface nxopen.features.HolePackageBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setScrewSize(String) - Method in interface nxopen.geometricutilities.StartHoleData

License requirements: solid_modeling ("SOLIDS MODELING")
.

setScrewSizeText(String) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder

License requirements: None.

setScrewSizeTextType(SearchModelViewBuilder.TextComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder

License requirements: None.

setScrewStandard(String) - Method in interface nxopen.features.HolePackageBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setScrewType(String) - Method in interface nxopen.features.HolePackageBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setScrewType(String) - Method in interface nxopen.geometricutilities.StartHoleData

License requirements: solid_modeling ("SOLIDS MODELING")
.

setScrewType(NXObject, String) - Method in interface nxopen.tooling.ReusablePocketBuilder

Sets screw type for hole series.

setScript(TextBuilder.ScriptOptions) - Method in interface nxopen.features.TextBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setScrollAreaSize(int) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setScrollFrozenColumn(int) - Method in interface nxopen.blockstyler.Tree

License requirements: None.

setScrollLineNumber(int) - Method in interface nxopen.blockstyler.Tree

License requirements: None.

setsDefaultTypesFromContext() - Method in interface nxopen.features.shipdesign.SteelFeatureSpreadsheetBuilder

Set default section types of the builder when a new context entity is set.

setSealerCheckZoneRadius(WeldAdvisorCustomerDefault, double) - Method in interface nxopen.weld.WeldAdvisorBuilder

The weld advisor parameter Sealer Check Zone Radius
License requirements: ugweld ("UG WELD")
.

setSeamOption(SeamBlockBuilder.SeamType) - Method in interface nxopen.features.shipdesign.SeamBlockBuilder

License requirements: None.

setSearchBoundaryBodies(boolean) - Method in interface nxopen.tooling.ChannelFittingBuilder

License requirements: None.

setSearchDirectories(String[], boolean[]) - Method in interface nxopen.LoadOptions

Set which search directories are to appear in the list.

setSearchDirectories(int, String[], boolean[]) - Method in interface nxopen.uf.UFAssem

Refer to UF_ASSEM_set_search_directories for documentation.

setSearchDirectoryList(String) - Method in interface nxopen.Catiav5Importer

License requirements: None.

setSearchExistingInterPartExpressionOnly(boolean) - Method in interface nxopen.assemblies.RelinkerBuilder

License requirements: wave ("WAVE FUNCTIONALITY")
.

setSearchFolderListForExportDrawingFiles(String[]) - Method in interface nxopen.tooling.RenameAndExportComponentBuilder

Set search folder list
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setSearchGeometry(DisplayableObject[]) - Method in interface nxopen.cam.FeatureRecognitionBuilder

Sets the geometry to search
License requirements: None.

setSearchGeometry(boolean) - Method in interface nxopen.tooling.AddReusablePart

Sets the search geometry for a reusable component
License requirements: None.

setSearchingDestinationObject(String) - Method in interface nxopen.assemblies.RelinkerBuilder

License requirements: wave ("WAVE FUNCTIONALITY")
.

setSearchingSourceObject(String) - Method in interface nxopen.assemblies.RelinkerBuilder

License requirements: wave ("WAVE FUNCTIONALITY")
.

setSearchingSourcePart(String) - Method in interface nxopen.assemblies.RelinkerBuilder

License requirements: wave ("WAVE FUNCTIONALITY")
.

setSearchingSourcePartAttribute(String) - Method in interface nxopen.assemblies.RelinkerBuilder

License requirements: wave ("WAVE FUNCTIONALITY")
.

setSearchLibraries(String[]) - Method in interface nxopen.preferences.RulePreferences

Set the search libraries for user classes.

setSearchOptionValue(String, String, boolean) - Method in interface nxopen.assemblies.SubsetRecipe

Sets value of specified search option from given option set.

setSearchScope(SearchModelViewBuilder.SearchScopeOptions) - Method in interface nxopen.annotations.SearchModelViewBuilder

License requirements: None.

setSearchShapeSimilarity(ShapeSearchBuilder.ShapeSimilarity) - Method in interface nxopen.shapesearch.ShapeSearchBuilder

License requirements: shape_search ("Shape Search")
.

setSearchShapeSize(ShapeSearchBuilder.ShapeSize) - Method in interface nxopen.shapesearch.ShapeSearchBuilder

License requirements: shape_search ("Shape Search")
.

setSearchSubsetBuilder(SubsetBuilder) - Method in interface nxopen.assemblies.MechanicalRoutingSubsetBuilder

Sets the subset builder which needs to be set by user to search runs, the user will have to use FindInCollaborativeDesign to search for runs using object type RunElement.

setSearchTemplateFromSiteDirectory(boolean) - Method in interface nxopen.report.ReportPreference

License requirements: None.

setSearchTermLogic(SearchTerm.SearchTermLogicType) - Method in interface nxopen.assemblies.AttributeSearchTermBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setSearchTermLogic(SearchTerm.SearchTermLogicType) - Method in interface nxopen.assemblies.BoxSearchTermBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setSearchTermLogic(SearchTerm.SearchTermLogicType) - Method in interface nxopen.assemblies.PlaneSearchTermBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setSearchTermLogic(SearchTerm.SearchTermLogicType) - Method in interface nxopen.assemblies.ProximitySearchTermBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setSearchTermLogic(SearchTerm.SearchTermLogicType) - Method in interface nxopen.assemblies.RunContentProximitySearchTermBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setSearchTermLogic(SearchTerm.SearchTermLogicType, SearchTerm[]) - Method in interface nxopen.assemblies.SubsetRecipe

Changes the search term logic of each SearchTerm s passed in.

setSearchType(ShapeSearchBuilder.SearchByType) - Method in interface nxopen.shapesearch.ShapeSearchBuilder

License requirements: shape_search ("Shape Search")
.

setSeat(HumanPosturePredictionBuilder.SeatType) - Method in interface nxopen.HumanPosturePredictionBuilder

License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setSeatAngle(double) - Method in interface nxopen.features.vehicledesign.BaseDataPassengerBuilder

Deprecated.

Deprecated in NX9.0.1. Obtain the expression using BaseDataPassengerBuilder.seatAngleExp() to query or edit it.

setSeatDirection(BaseDataPassengerBuilder.SeatDirectionOptions) - Method in interface nxopen.features.vehicledesign.BaseDataPassengerBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSeatPosition(SeatBeltAnchorageBuilder.SeatPositionTypes) - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSeatReferencePoint(Point) - Method in interface nxopen.features.vehicledesign.AllAroundVisionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSeatReferencePoint(Point) - Method in interface nxopen.features.vehicledesign.BaseDataDriverBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSeatReferencePoint(Point) - Method in interface nxopen.features.vehicledesign.BaseDataPassengerBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSeatReferencePointActive(boolean) - Method in interface nxopen.features.vehicledesign.BaseDataDriverBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSeatReferencePointActive(boolean) - Method in interface nxopen.features.vehicledesign.BaseDataPassengerBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSeatTrackAngleA19(String) - Method in interface nxopen.HumanPosturePredictionBuilder

License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setSeatType(SeatBeltAnchorageBuilder.SeatTypes) - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSecDatLetter(String) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSecDirection(InspectionAlignmentBuilder.AlignmentDirections) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSECNode(DBConveyorNode) - Method in interface nxopen.linedesigner.ConveyorStationFeatureBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setSecondArrowheadCfw(LineCfw) - Method in interface nxopen.annotations.LineAndArrowPreferences

Sets the second arrowhead color, font, and width
License requirements: None.

setSecondArrowheadColor(NXColor) - Method in interface nxopen.annotations.LineArrowStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setSecondArrowheadFont(DisplayableObject.ObjectFont) - Method in interface nxopen.annotations.LineArrowStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setSecondArrowheadWidth(LineWidth) - Method in interface nxopen.annotations.LineArrowStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setSecondArrowLineCfw(LineCfw) - Method in interface nxopen.annotations.LineAndArrowPreferences

Sets the second arrow line color, font, and width
License requirements: None.

setSecondArrowLineColor(NXColor) - Method in interface nxopen.annotations.LineArrowStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setSecondArrowLineFont(DisplayableObject.ObjectFont) - Method in interface nxopen.annotations.LineArrowStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setSecondArrowLineWidth(LineWidth) - Method in interface nxopen.annotations.LineArrowStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setSecondArrowType(ArrowheadType) - Method in interface nxopen.annotations.LineAndArrowPreferences

Sets the second arrow type
License requirements: None.

setSecondArrowType(ArrowheadType) - Method in interface nxopen.annotations.LineArrowStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setSecondary(boolean) - Method in interface nxopen.features.sheetmetal.ContourFlangeBuilder

Sets the contour flange type.

setSecondary(boolean) - Method in interface nxopen.features.sheetmetal.LoftedFlangeBuilder

Sets the type of lofted flange feature - base lofted flange/secondary lofted flange.

setSecondary(boolean) - Method in interface nxopen.features.sheetmetal.TabBuilder

Sets the tab type
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setSecondary(GanttOperationObject) - Method in interface nxopen.mechatronics.GanttLinkerBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setSecondary1(PlateSystemBuilder.StiffenerDirectionType) - Method in interface nxopen.features.shipdesign.PlateSystemBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setSecondary1OnReference(PlateSystemBuilder.StiffenerDirectionType) - Method in interface nxopen.features.shipdesign.PlateSystemBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setSecondary2(PlateSystemBuilder.StiffenerDirectionType) - Method in interface nxopen.features.shipdesign.PlateSystemBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setSecondary2OnReference(PlateSystemBuilder.StiffenerDirectionType) - Method in interface nxopen.features.shipdesign.PlateSystemBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setSecondaryAlignment(ViewCommonViewLabelBuilder.SecondaryAlignmentType) - Method in interface nxopen.drawings.ViewCommonViewLabelBuilder

License requirements: drafting ("DRAFTING")
.

setSecondaryCalloutActive(boolean) - Method in interface nxopen.annotations.DimensionMeasurementBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING")
.

setSecondaryComponent(DrawingsPropertiesBuilder.SecondaryComponentOptions) - Method in interface nxopen.drawings.DrawingsPropertiesBuilder

License requirements: drafting ("DRAFTING")
.

setSecondaryContentHiddenLineColor(NXColor) - Method in interface nxopen.drafting.AutomationPreferencesBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setSecondaryContentHiddenLineFont(PartDrafting.FontType) - Method in interface nxopen.drafting.AutomationPreferencesBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setSecondaryContentHiddenLineWidth(PartDrafting.WidthType) - Method in interface nxopen.drafting.AutomationPreferencesBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setSecondaryContentVisibleLineColor(NXColor) - Method in interface nxopen.drafting.AutomationPreferencesBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setSecondaryContentVisibleLineFont(PartDrafting.FontType) - Method in interface nxopen.drafting.AutomationPreferencesBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setSecondaryContentVisibleLineWidth(PartDrafting.WidthType) - Method in interface nxopen.drafting.AutomationPreferencesBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setSecondaryDatumDualMCMType(SearchCriteriaFeatureControlFrameBuilder.SecondaryDatumDualMCMOptions) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

Deprecated.

Deprecated in NX10.0.0. Use Annotations.SearchCriteriaFeatureControlFrameBuilder#datumMCMType and Annotations.SearchCriteriaFeatureControlFrameBuilder#setDatumMCMType instead.

setSecondaryDatumDualText(String) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

Deprecated.

Deprecated in NX10.0.0. Use Annotations.SearchCriteriaFeatureControlFrameBuilder#datumText and Annotations.SearchCriteriaFeatureControlFrameBuilder#setDatumText instead.

setSecondaryDatumExtendedText(String) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setSecondaryDatumMCMType(SearchCriteriaFeatureControlFrameBuilder.SecondaryDatumMCMOptions) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

Deprecated.

Deprecated in NX10.0.0. Use Annotations.SearchCriteriaFeatureControlFrameBuilder#datumMCMType and Annotations.SearchCriteriaFeatureControlFrameBuilder#setDatumMCMType instead.

setSecondaryDatumReference(DatumReference) - Method in interface nxopen.annotations.FcfFrame

Deprecated.

Deprecated in NX10.0.0. Use FeatureControlFrameDataBuilder.secondaryDatumReference() instead.

setSecondaryDatumText(String) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

Deprecated.

Deprecated in NX10.0.0. Use Annotations.SearchCriteriaFeatureControlFrameBuilder#datumText and Annotations.SearchCriteriaFeatureControlFrameBuilder#setDatumText instead.

setSecondaryDirection(InspectionAlignmentAssistantBuilder.Direction) - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSecondaryIndexing(ViewCommonViewLabelBuilder.SecondaryIndexingType) - Method in interface nxopen.drawings.ViewCommonViewLabelBuilder

License requirements: drafting ("DRAFTING")
.

setSecondaryNumber(String) - Method in interface nxopen.drawings.DrawingSheetBuilder

License requirements: drafting ("DRAFTING")
.

setSecondaryNumberDelimiter(String) - Method in interface nxopen.drawings.DrawingFormatSheetBuilder

License requirements: drafting ("DRAFTING")
.

setSecondaryNumberString(String) - Method in interface nxopen.linedesigner.InsertSheetBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setSecondaryOffsetGeometry(NXObject) - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSecondaryRoughnessText(String) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder

License requirements: None.

setSecondaryRoughnessType(SearchModelViewBuilder.TextComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder

License requirements: None.

setSecondarySectionValues(String[]) - Method in interface nxopen.geometricutilities.SecondarySectionData

Set the Secondary Sketch Expression Values.

setSecondarySequence(TurnRoughFinishTestCut.SecondarySequenceTypes) - Method in interface nxopen.cam.TurnRoughFinishTestCut

License requirements: cam_base ("CAM BASE")
.

setSecondaryState(InspectionAlignmentAssistantBuilder.State) - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSecondaryThicknessUser(double) - Method in interface nxopen.weld.EdgePrepValuesBuilder

License requirements: structure_weld ("STRUCTURE WELD")
.

setSecondaryType(InspectionAlignmentAssistantBuilder.FeatureType) - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSecondaryVector(Direction) - Method in interface nxopen.cae.LaminateDrapingDataBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setSecondaryVectorChoice(LaminateDrapingDataBuilder.SecondaryVectorType) - Method in interface nxopen.cae.LaminateDrapingDataBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setSecondAssociativity(Associativity) - Method in interface nxopen.annotations.Dimension

Sets the second associativity data.

setSecondAssociativityVectorFlipped(boolean) - Method in interface nxopen.annotations.BaseAngularDimensionBuilder

Second associativity vector flipped
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING")
.

setSecondAssociativityVectorFlipped(boolean) - Method in interface nxopen.annotations.BaseRapidDimensionBuilder

Second associativity vector flipped
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING")
.

setSecondBody(DisplayableObject) - Method in interface nxopen.mechatronics.ChangeMaterialBuilder

Sets the second object.

setSecondBody(DisplayableObject) - Method in interface nxopen.mechatronics.PreventCollisionBuilder

Sets the second object.

setSecondBoundingObjectEndOption(TrimCurveBuilder.SecondBoundingObjectEndOptions) - Method in interface nxopen.features.TrimCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setSecondBoundingObjectOption(TrimCurveBuilder.SecondBoundingObjectOptions) - Method in interface nxopen.features.TrimCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setSecondBoundingObjectPickPoint(Point3d) - Method in interface nxopen.features.TrimCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setSecondBoundingPlane(Plane) - Method in interface nxopen.features.TrimCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setSecondChainInstallDirection(StandardPartItemBuilder.Direction) - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setSecondClearance(double) - Method in interface nxopen.tooling.SpecialFormingBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setSecondCompartment(String) - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setSecondConstraintCurveCollector(ScCollector) - Method in interface nxopen.geometricutilities.ConicCrossSection

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSecondConveyingSurfaceCorner(Point) - Method in interface nxopen.linedesigner.SingleElementConveyorBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setSecondCsys(CoordinateSystem) - Method in interface nxopen.motion.JointDefine

Sets the csys of second link
License requirements: mechanisms ("MECHANISMS")
.

setSecondCurve(NXObject) - Method in interface nxopen.cam.TeachmodeLinearMoveBuilder

License requirements: cam_base ("CAM BASE")
.

setSecondCurve(Curve) - Method in interface nxopen.features.GeodesicChamferBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSecondCurve(Curve) - Method in interface nxopen.features.GeodesicFilletBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSecondCurveMaximumPenetration(double) - Method in interface nxopen.motion.CurveContactRecurdyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using CurveContactRecurdyn.secondCurveMaximumPenetrationExpression() to query or edit it.

setSecondCurveStock(double) - Method in interface nxopen.cam.TeachmodeLinearMoveBuilder

License requirements: cam_base ("CAM BASE")
.

setSecondCurveToolPosition(TeachmodeLinearMoveBuilder.CurveToolPositionTypes) - Method in interface nxopen.cam.TeachmodeLinearMoveBuilder

License requirements: cam_base ("CAM BASE")
.

setSecondCut(int) - Method in interface nxopen.cam.DmStreamlineCutStep

License requirements: cam_base ("CAM BASE")
.

setSecondDefinitionPoint(Point3d) - Method in interface nxopen.annotations.Associativity

Sets the second definition point.

setSecondDirection(Direction) - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder

License requirements: None.

setSecondDistance(String) - Method in interface nxopen.features.sheetmetal.FlangeBuilder

Deprecated.

Deprecated in NX10.0.0. Use Expression.setRightHandSide(java.lang.String) on the Expression object returned from FlangeBuilder.secondDistance() instead.

setSecondDriverJointLowerLimit(double) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSecondDriverJointSteps(int) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSecondDriverJointUpperLimit(double) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSecondEdgeContinuityReversed(boolean) - Method in interface nxopen.features.BridgeSurfaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSecondEdgeLimitEndToEnd(boolean) - Method in interface nxopen.features.BridgeSurfaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSecondEdgeReversed(boolean) - Method in interface nxopen.features.BridgeSurfaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSecondEndPoint(Point) - Method in interface nxopen.formboard.PathLengthAnnotationBuilder

License requirements: routing_harness ("Routing Harness")
.

setSecondExtensionLineCfw(LineCfw) - Method in interface nxopen.annotations.LineAndArrowPreferences

Sets the second extension line color, font, and width
License requirements: None.

setSecondExtensionLineColor(NXColor) - Method in interface nxopen.annotations.LineArrowStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setSecondExtensionLineFont(DisplayableObject.ObjectFont) - Method in interface nxopen.annotations.LineArrowStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setSecondExtensionLineWidth(LineWidth) - Method in interface nxopen.annotations.LineArrowStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setSecondFaceCollector(ScCollector) - Method in interface nxopen.features.FaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSecondFaceset(ScCollector) - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. Use WeldGrooveBuilder.faceSet2() instead.

setSecondFacesetBottomEdges(Section) - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. Use WeldGrooveBuilder.edgeSet2() instead.

setSecondFacesetEndAdjacentFaces(Face[]) - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. This functionality is no longer supported.

setSecondFacesetHelpPoint(Point3d) - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. Use WeldGrooveBuilder.seedPoint2() and WeldGrooveBuilder.setSeedPoint2(nxopen.Point3d) instead.

setSecondFacesetNormalReversed(boolean) - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. This functionality is no longer supported.

setSecondFacesetStartAdjacentFaces(Face[]) - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. This functionality is no longer supported.

setSecondFacesetTopEdges(Section) - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. Use WeldGrooveBuilder.edgeSet2() instead.

setSecondGeometryBoundingBufferLength(double) - Method in interface nxopen.motion.BodyContactRecurdyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using BodyContactRecurdyn.secondGeometryBoundingBufferLengthExpression() to query or edit it.

setSecondGeometryMaterialDirection(CurveContactBuilder.GeometryMaterialSide) - Method in interface nxopen.motion.CurveContactBuilder

License requirements: mechanisms ("MECHANISMS")
.

setSecondGeometryMaxFacetSizeFactor(double) - Method in interface nxopen.motion.BodyContactRecurdyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using BodyContactRecurdyn.secondGeometryMaxFacetSizeFactorExpression() to query or edit it.

setSecondGeometryMaxFacetSizeFactorFlag(boolean) - Method in interface nxopen.motion.BodyContactRecurdyn

License requirements: mechanisms ("MECHANISMS")
.

setSecondGeometryMaximumPenetration(double) - Method in interface nxopen.motion.BodyContactRecurdyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using BodyContactRecurdyn.secondGeometryMaximumPenetration() to query or edit it.

setSecondGeometryPlaneToleranceFactor(double) - Method in interface nxopen.motion.BodyContactRecurdyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using BodyContactRecurdyn.secondGeometryPlaneToleranceFactorExpression() to query or edit it.

setSecondGeometryPlaneToleranceFactorSolidContact(double) - Method in interface nxopen.motion.BodyContactRecurdyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using BodyContactRecurdyn.secondGeometryPlaneToleranceFactorSolidContactExpression() to query or edit it.

setSecondJogAngle(double) - Method in interface nxopen.annotations.LineArrowStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setSecondJogDisplay(boolean) - Method in interface nxopen.annotations.LineArrowStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setSecondJogEndOffset(double) - Method in interface nxopen.annotations.LineArrowStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setSecondJogOrientation(JogOrientation) - Method in interface nxopen.annotations.LineArrowStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setSecondJogStartOffset(double) - Method in interface nxopen.annotations.LineArrowStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setSecondLength(double) - Method in interface nxopen.tooling.DieBaseBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setSecondLinearDistance(double) - Method in interface nxopen.cam.ToolPathEditorBuilder

License requirements: None.

setSecondLink(Link) - Method in interface nxopen.motion.JointDefine

Sets the second link
License requirements: mechanisms ("MECHANISMS")
.

setSecondMargin(NXObject) - Method in interface nxopen.tooling.AutoDimensionBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setSecondMatrix(NXMatrix) - Method in interface nxopen.motion.JointDefine

Sets the matrix of second link
License requirements: mechanisms ("MECHANISMS")
.

setSecondObject(NXObject) - Method in interface nxopen.annotations.Associativity

Sets the second associativity object, if the annotation is associated to an intersection point.

setSecondObjectFilter(CollisionPairBuilder.Filter) - Method in interface nxopen.cam.CollisionPairBuilder

License requirements: cam_base ("CAM BASE")
.

setSecondObjectName(String) - Method in interface nxopen.cam.CollisionPairBuilder

License requirements: cam_base ("CAM BASE")
.

setSecondOffset(String) - Method in interface nxopen.features.ChamferBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSecondOffset(String) - Method in interface nxopen.geometricutilities.ConicCrossSection

Deprecated.

Deprecated in NX9.0.0. To set the value of the expression modify the expression directly using ConicCrossSection.secondOffset() and Expression.setRightHandSide(java.lang.String) .

setSecondOffset(Expression) - Method in interface nxopen.routing.CrossSection

Sets the offset expression applied to the profile when generating a Sweep.

setSecondOffsetOption(ConicCrossSection.OffsetMethod) - Method in interface nxopen.geometricutilities.ConicCrossSection

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSecondOrientationType(JointDefine.OrientationType) - Method in interface nxopen.motion.JointDefine

License requirements: mechanisms ("MECHANISMS")
.

setSecondOrigin(Point) - Method in interface nxopen.motion.JointDefine

Sets the origin of second link
License requirements: mechanisms ("MECHANISMS")
.

setSecondPanelType(GapFlushnessBuilder.PanelTypes) - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSecondPenetrationDepth(String) - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. Use WeldGrooveBuilder.secondPenetrationDepth() instead.

setSecondPlane(Plane) - Method in interface nxopen.features.IntersectionCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSecondPlane(Plane) - Method in interface nxopen.routing.FittingOverstockBuilder

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setSecondPoint(double) - Method in interface nxopen.features.GeodesicChamferBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSecondPoint(double) - Method in interface nxopen.features.GeodesicFilletBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSecondPosToExtensionLineDistance(double) - Method in interface nxopen.annotations.LineArrowStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setSecondPosToExtLineDist(double) - Method in interface nxopen.annotations.LineAndArrowPreferences

Sets the second position to extension line distance
License requirements: None.

setSecondPrincipleMi(boolean) - Method in interface nxopen.features.SectionInertiaAnalysisBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSecondPtSelect(Point) - Method in interface nxopen.cae.FaceFromBoundaryBuilder

License requirements: None.

setSecondRadius(double) - Method in interface nxopen.cam.TurnEngageRetractBuilder

License requirements: cam_base ("CAM BASE")
.

setSecondsBetweenSteps(double) - Method in interface nxopen.features.FeatureReplayBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSecondScale(double) - Method in interface nxopen.motion.GeneralCouplerBuilder

Deprecated.

Deprecated in NX8.5.0. Obtion the exression using GeneralCouplerBuilder.secondScaleExpression() to query or edit it.

setSecondSection(Section) - Method in interface nxopen.features.GeodesicChamferBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSecondSection(Section) - Method in interface nxopen.features.GeodesicFilletBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSecondSection(Section) - Method in interface nxopen.features.RuledBuilder

License requirements: features_modeling ("FEATURES MODELING") OR nx_freeform_1 ("basic freeform modeling")
.

setSecondSection(Section) - Method in interface nxopen.weld.WeldPointBuilder

Create second section
License requirements: ugweld ("UG WELD")
.

setSecondSegment(ISegment) - Method in interface nxopen.routing.DiscontinuityCorner

Sets the second segment of a discontinuity corner, segment must be attached to the Routing.ControlPoint that defines this corner.

setSecondSort(Tag, String, int) - Method in interface nxopen.uf.UFPlist

Deprecated.

The equivalent Open C method has retired

setSecondType(GcouplerMovementTypes) - Method in interface nxopen.motion.GeneralCouplerBuilder

License requirements: mechanisms ("MECHANISMS")
.

setSecondVector(Direction) - Method in interface nxopen.annotations.BaseAngularDimensionBuilder

License requirements: drafting ("DRAFTING")
.

setSecondVector(Direction) - Method in interface nxopen.motion.JointDefine

Sets the direction of second link
License requirements: mechanisms ("MECHANISMS")
.

setSecondVectorView(View) - Method in interface nxopen.annotations.BaseAngularDimensionBuilder

License requirements: drafting ("DRAFTING")
.

setSectCriteria(CyclicSymmetricParameters.SectorCriteria) - Method in interface nxopen.cae.CyclicSymmetricParameters

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setSection(Section) - Method in interface nxopen.ExpressionSectionSet

License requirements: None.

setSection(Section) - Method in interface nxopen.features.CurveLengthBuilder

Sets the section
License requirements: solid_modeling ("SOLIDS MODELING")
.

setSection(ScCollector) - Method in interface nxopen.features.DeleteCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSection(Section) - Method in interface nxopen.features.EmbossRegion

Sets the section that is composed of chains
License requirements: solid_modeling ("SOLIDS MODELING")
.

setSection(Section) - Method in interface nxopen.features.ExtrudeBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSection(ScCollector) - Method in interface nxopen.features.ResizeChamferCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSection(Section) - Method in interface nxopen.features.RevolveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSection(Section) - Method in interface nxopen.features.sheetmetal.BeadBuilder

Sets the Section used by the bead. section should be open.

setSection(Section) - Method in interface nxopen.features.sheetmetal.BendBuilder

Sets the Section
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setSection(Section) - Method in interface nxopen.features.sheetmetal.ContourFlangeBuilder

Sets the section of contour flange
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setSection(Section) - Method in interface nxopen.features.sheetmetal.DimpleBuilder

Sets the Section used by the Dimple.

setSection(Section) - Method in interface nxopen.features.sheetmetal.DrawnCutoutBuilder

Sets the Section used by the Drawn Cutout.

setSection(Section) - Method in interface nxopen.features.sheetmetal.EdgeRipBuilder

Sets the section used by Edge Rip
License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setSection(Section) - Method in interface nxopen.features.sheetmetal.JogBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setSection(Section) - Method in interface nxopen.features.sheetmetal.LouverBuilder

Sets the section used by the louver.

setSection(Section) - Method in interface nxopen.features.sheetmetal.NormalCutoutBuilder

Sets the section used by the normal cutout.

setSection(Section) - Method in interface nxopen.features.sheetmetal.TabBuilder

Sets the section of tab
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setSection(Section) - Method in interface nxopen.features.VarsweepBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSection(Section) - Method in interface nxopen.SketchEvaluator

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSectionAlignment(GapFlushnessBuilder.SectionAlignments) - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSectionAlignmentDirection(Direction) - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSectionAlignmentVector(Direction) - Method in interface nxopen.features.AestheticFaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setSectionAngles(double[]) - Method in interface nxopen.cae.PostAnnotationBuilder

Set the section angles for axis-symmetric model for which annotation is defined.

setSectionArea(boolean) - Method in interface nxopen.features.SectionInertiaAnalysisBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSectionBlockParts(String[]) - Method in interface nxopen.features.shipdesign.SelectPartBuilder

The section block part file name.

setSectionBlockParts(String[]) - Method in interface nxopen.features.shipdesign.TransitionBuilder

The section block part file name.

setSectionCurve(GroundClearanceBuilder.SectionCurveType) - Method in interface nxopen.features.vehicledesign.GroundClearanceBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSectionCurve(NXObject[]) - Method in interface nxopen.mechatronics.CurveOnCurveJointBuilder

Set the section curve which belong to the attachment
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setSectionCurveDirections(NXObject, NXObject, int[]) - Method in interface nxopen.annotations.HatchBuilder

Set directions of a curve to the annotation The number of diection map elements need to specify before to the direction of the curve elements to the annotation
License requirements: drafting ("DRAFTING")
.

setSectionCurvesVisibility(boolean) - Method in interface nxopen.annotations.LightweightSectionView

Sets the lightweight section view curves visiblity
License requirements: None.

setSectionedHiddenColor(NXColor) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setSectionedHiddenFont(Font) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setSectionedHiddenWidth(Width) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setSectionedSecondaryHiddenColor(NXColor) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setSectionedSecondaryHiddenFont(Font) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setSectionedSecondaryHiddenWidth(Width) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setSectionedSecondaryVisibleColor(NXColor) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setSectionedSecondaryVisibleFont(Font) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setSectionedSecondaryVisibleWidth(Width) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setSectionedVisibleColor(NXColor) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setSectionedVisibleFont(Font) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setSectionedVisibleWidth(Width) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setSectionFileBrowser(String) - Method in interface nxopen.linedesigner.CreateFenceBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setSectionFrameType(SelectPartBuilder.Types) - Method in interface nxopen.features.shipdesign.SelectPartBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setSectionGeometryTolerance(double) - Method in interface nxopen.drawings.ViewSettingsBuilder

License requirements: convert_to_pmi (" Convert To PMI"), drafting ("DRAFTING")
.

setSectioningMethod(SectionInertiaAnalysisBuilder.SampleMethod) - Method in interface nxopen.features.SectionInertiaAnalysisBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSectionLayer(int) - Method in interface nxopen.features.SectionInertiaAnalysisBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSectionLayer(int) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSectionLength(boolean) - Method in interface nxopen.features.SectionInertiaAnalysisBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSectionLineOnlyPlacementOrigin(Point3d) - Method in interface nxopen.drawings.SectionLineSegmentsBuilder

License requirements: None.

setSectionLineType(SketchSectionLineBuilder.SectionLineTypes) - Method in interface nxopen.drawings.SketchSectionLineBuilder

License requirements: drafting ("DRAFTING")
.

setSectionLocation(SweptBuilder.SectionLocationTypes) - Method in interface nxopen.features.SweptBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSectionMappingFile(String) - Method in interface nxopen.features.shipdesign.TransitionBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setSectionMethodCircleTangent(SectionSurfaceBuilderEx.SectionMethodCircleTangentType) - Method in interface nxopen.features.SectionSurfaceBuilderEx

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setSectionMethodCircularTangent(SectionSurfaceBuilder.SectionMethodCircularTangentEnum) - Method in interface nxopen.features.SectionSurfaceBuilder

Deprecated.

Deprecated in NX9.0.0. Use SectionSurfaceBuilderEx instead.

setSectionMethodFilletBridge(SectionSurfaceBuilder.SectionMethodFilletBridgeEnum) - Method in interface nxopen.features.SectionSurfaceBuilder

Deprecated.

Deprecated in NX9.0.0. Use SectionSurfaceBuilderEx instead.

setSectionMethodFilletBridge(SectionSurfaceBuilderEx.SectionMethodFilletBridgeType) - Method in interface nxopen.features.SectionSurfaceBuilderEx

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setSectionMethodRho(SectionSurfaceBuilder.SectionMethodRhoEnum) - Method in interface nxopen.features.SectionSurfaceBuilder

Deprecated.

Deprecated in NX9.0.0. Use SectionSurfaceBuilderEx instead.

setSectionMethodRho(SectionSurfaceBuilderEx.SectionMethodRhoType) - Method in interface nxopen.features.SectionSurfaceBuilderEx

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setSectionName(String) - Method in interface nxopen.cae.IBeamSectionBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setSectionName(String) - Method in interface nxopen.features.shipdesign.ShipSectionBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_detail ("Ship Detail Design")
.

setSectionNormal(SectionInertiaAnalysisBuilder.SectionAxisNormal) - Method in interface nxopen.features.SectionInertiaAnalysisBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSectionNumber(String) - Method in interface nxopen.features.shipdesign.ManufacturingPreparationBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setSectionNumber(String) - Method in interface nxopen.features.shipdesign.SteelDistributionBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setSectionNumber1(int) - Method in interface nxopen.geometricanalysis.sectionanalysis.GridSpacingBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setSectionNumber2(int) - Method in interface nxopen.geometricanalysis.sectionanalysis.GridSpacingBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setSectionOffsetPropertyValue(String, BeamSectionOffsetOptions) - Method in interface nxopen.cae.PropertyTable

Sets the beam section offset options BeamSectionOffsetOptions
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Created in NX7.5.0

setSectionOption(FaceCurvatureAnalysisBuilder.DirectionTypes) - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setSectionOrientation(AddendumSectionBuilder.SectionOrientationType) - Method in interface nxopen.die.AddendumSectionBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setSectionOrientation(Matrix3x3) - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setSectionOrientationOption(StyledSweepBuilder.SectionOrientationOptions) - Method in interface nxopen.features.StyledSweepBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setSectionOrientationPropertyValue(String, BeamSectionOrientationOptions) - Method in interface nxopen.cae.PropertyTable

Sets the beam section orientation options BeamSectionOrientationOptions
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Created in NX7.5.0

setSectionOrigin(Point3d) - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setSectionPart(String) - Method in interface nxopen.features.shipdesign.ShipSectionBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_detail ("Ship Detail Design")
.

setSectionPlacement(String) - Method in interface nxopen.die.ThroatChildBuilder

License requirements: ug_die_design ("Die Design")
.

setSectionPlane(Plane) - Method in interface nxopen.die.AddendumSectionBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setSectionPlane(Plane) - Method in interface nxopen.features.SectionCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSectionPlane(Plane) - Method in interface nxopen.features.shipdesign.SectionViewBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setSectionPlane(Plane) - Method in interface nxopen.features.TextBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSectionPlaneEntity(Plane) - Method in interface nxopen.weld.WeldPointBuilder

Sets
License requirements: ugweld ("UG WELD")
.

setSectionPlaneName(String) - Method in interface nxopen.features.shipdesign.SectionViewBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setSectionPlaneNormal(Direction) - Method in interface nxopen.weld.DatumCommonBuilder

License requirements: ugweld ("UG WELD")
.

setSectionPlyLayer(int, int, int) - Method in interface nxopen.cae.ResultParameters

Set section, ply and layer
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setSectionPoint(Point) - Method in interface nxopen.die.AddendumSectionBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setSectionPrefs(Tag, UFTabnot.SectionPrefs) - Method in interface nxopen.uf.UFTabnot

Refer to UF_TABNOT_set_section_prefs for documentation.

setSectionRule(SectionViewBuilder.SectionRuleOptions) - Method in interface nxopen.features.shipdesign.SectionEditorBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setSectionRule(SectionViewBuilder.SectionRuleOptions) - Method in interface nxopen.features.shipdesign.SectionViewBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setSections(boolean) - Method in interface nxopen.features.SectionInertiaAnalysisBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSections(Section[]) - Method in interface nxopen.geometricutilities.AlignmentMethodBuilder

Set the sections.

setSectionShape(AddendumSectionBuilder.SectionShapeType) - Method in interface nxopen.die.AddendumSectionBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setSectionShape(RunnerBuilder.SectionType) - Method in interface nxopen.tooling.RunnerBuilder

License requirements: None.

setSectionSheetBodies(boolean) - Method in interface nxopen.drawings.SectionViewStyle

Sets the status of section sheet bodies.

setSectionSheetBodies(boolean) - Method in interface nxopen.preferences.SectionViewPreferences

Sets the status of section sheet bodies.

setSectionSide(DimpleBuilder.SectionSideOptions) - Method in interface nxopen.features.sheetmetal.DimpleBuilder

Sets the section Side for the Dimple section.

setSectionSide(DrawnCutoutBuilder.SectionSideOptions) - Method in interface nxopen.features.sheetmetal.DrawnCutoutBuilder

Sets the section side for the Drawn Cutout.

setSectionSide(LouverBuilder.SectionSideOptions) - Method in interface nxopen.features.sheetmetal.LouverBuilder

Sets the side of the section on which the louver is created and width is measure.

setSectionSide(NormalCutoutBuilder.SectionSideOptions) - Method in interface nxopen.features.sheetmetal.NormalCutoutBuilder

Sets the side of the section that the normal cutout removes material.

setSectionSketch(Sketch) - Method in interface nxopen.features.EditCrossSectionBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setSectionsPerDrawing(SectionDrawingBuilder.SectionsPerDrawingOptions) - Method in interface nxopen.features.shipdesign.SectionDrawingBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setSectionSubType1(String) - Method in interface nxopen.features.shipdesign.SteelFeatureSpreadsheetBuilder

Sets the section sub type by string value.

setSectionSubType2(String) - Method in interface nxopen.features.shipdesign.SteelFeatureSpreadsheetBuilder

Sets the section sub type2 by string value.

setSectionTemplateString(Section) - Method in interface nxopen.features.ThroughCurvesBuilder

License requirements: features_modeling ("FEATURES MODELING") OR nx_freeform_1 ("basic freeform modeling")
.

setSectionType(SketchSectionLineBuilder.Type) - Method in interface nxopen.drawings.SketchSectionLineBuilder

License requirements: drafting ("DRAFTING")
.

setSectionType(PillarSystemBuilder.StockSectionType) - Method in interface nxopen.features.shipdesign.EditStockBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setSectionType(PillarBuilder.StockSectionType) - Method in interface nxopen.features.shipdesign.PillarBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setSectionType(PillarSystemBuilder.StockSectionType) - Method in interface nxopen.features.shipdesign.PillarSystemBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setSectionType(ProfileBuilder.SectionOption) - Method in interface nxopen.features.shipdesign.ProfileBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setSectionType(int) - Method in interface nxopen.features.shipdesign.QualifySketchBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setSectionType(ShipSectionBuilder.Type) - Method in interface nxopen.features.shipdesign.ShipSectionBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_detail ("Ship Detail Design")
.

setSectionType(int) - Method in interface nxopen.features.shipdesign.SteelFeatureSpreadsheetBuilder

Deprecated.

Deprecated in NX8.5.0. Use SteelFeatureSpreadsheetBuilder .SetSectionType()

setSectionType(String) - Method in interface nxopen.features.shipdesign.SteelFeatureSpreadsheetBuilder

This method sets the section type outside the block.

setSectionType(StiffenerStockBuilder.StockSectionType) - Method in interface nxopen.features.shipdesign.StiffenerStockBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setSectionTypesInUserControl(boolean) - Method in interface nxopen.features.shipdesign.ProfileCutoutBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setSectionVector(Direction) - Method in interface nxopen.tooling.RunnerBuilder

License requirements: None.

setSectionViewButtonClicked(boolean) - Method in interface nxopen.tooling.AssemblyDrawingBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setSectionViewMode(SectionViewBuilder.SectionViewModeType) - Method in interface nxopen.drawings.SectionViewBuilder

License requirements: None.

setSectionViewNamePrefix(String) - Method in interface nxopen.annotations.PmiPreferences

Sets the Section View name prefix
License requirements: None.

setSectionViewType(SectionViewBuilder.SectionLineType) - Method in interface nxopen.drawings.SectionViewBuilder

License requirements: None.

setSectionXMax(int) - Method in interface nxopen.features.shipdesign.ShipSectionBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_detail ("Ship Detail Design")
.

setSectionXMin(int) - Method in interface nxopen.features.shipdesign.ShipSectionBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_detail ("Ship Detail Design")
.

setSectionYMax(int) - Method in interface nxopen.features.shipdesign.ShipSectionBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_detail ("Ship Detail Design")
.

setSectionYMin(int) - Method in interface nxopen.features.shipdesign.ShipSectionBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_detail ("Ship Detail Design")
.

setSectionZMax(int) - Method in interface nxopen.features.shipdesign.ShipSectionBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_detail ("Ship Detail Design")
.

setSectionZMin(int) - Method in interface nxopen.features.shipdesign.ShipSectionBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_detail ("Ship Detail Design")
.

setSectorIndex(int) - Method in interface nxopen.cae.CyclicSymmetricParameters

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setSectorIndices(int[]) - Method in interface nxopen.cae.CyclicSymmetricParameters

Set the selected indices
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setSectors(int[]) - Method in interface nxopen.cae.PostAnnotationBuilder

Set the sector ids for cyclic-symmetric model for which annotation is defined
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setSectorValue(CyclicSymmetricParameters.Value) - Method in interface nxopen.cae.CyclicSymmetricParameters

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setSecurityLogging(boolean) - Method in interface nxopen.pdm.SessionSettings

License requirements: None.

setSecXorigin(boolean) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSecYorigin(boolean) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSecZorigin(boolean) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSeed(String) - Method in interface nxopen.blockstyler.SetList

Sets the seed using a dlx file.

setSeedDlxFile(String) - Method in interface nxopen.blockstyler.SetList

License requirements: None.

setSeedElement(FEElement) - Method in interface nxopen.cae.GroupByBoundaryBuilder

License requirements: None.

setSeedElement(FEElement) - Method in interface nxopen.cae.modelcheck.AlignShellElementNormalBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setSeedFace(Face) - Method in interface nxopen.cam.GeometrySet

License requirements: cam_base ("CAM BASE")
.

setSeedFace(Face) - Method in interface nxopen.cam.SurfaceRegions

License requirements: cam_base ("CAM BASE")
.

setSeedFace1(Face) - Method in interface nxopen.weld.FilletBuilder

License requirements: ugweld ("UG WELD")
.

setSeedFace1(Face) - Method in interface nxopen.weld.PlugSlotBuilder

License requirements: None.

setSeedFace1(Face) - Method in interface nxopen.weld.WeldGrooveBuilder

License requirements: ugweld ("UG WELD")
.

setSeedFace2(Face) - Method in interface nxopen.weld.FilletBuilder

License requirements: ugweld ("UG WELD")
.

setSeedFace2(Face) - Method in interface nxopen.weld.PlugSlotBuilder

License requirements: None.

setSeedFace2(Face) - Method in interface nxopen.weld.WeldGrooveBuilder

License requirements: ugweld ("UG WELD")
.

setSeedName(String) - Method in interface nxopen.assemblies.RunContentProximitySearchTermBuilder

Set the seed element name which is used in RunContentProximity search.

setSeedOnlyToggle(boolean) - Method in interface nxopen.geometricutilities.PatternDefinition

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setSeedPart(String) - Method in interface nxopen.pdm.PartFromTemplateBuilder

Deprecated.

Deprecated in NX10.0.0. Use PDM.PartOperationCreateBuilder instead.

setSeedPartTemplateData(String, String, boolean) - Method in interface nxopen.PartCollection

Specify template data to open seed part or empty item revision
License requirements: None.

setSeedPoint1(Point3d) - Method in interface nxopen.weld.FilletBuilder

License requirements: ugweld ("UG WELD")
.

setSeedPoint1(Point3d) - Method in interface nxopen.weld.WeldGrooveBuilder

License requirements: ugweld ("UG WELD")
.

setSeedPoint2(Point3d) - Method in interface nxopen.weld.FilletBuilder

License requirements: ugweld ("UG WELD")
.

setSeedPoint2(Point3d) - Method in interface nxopen.weld.WeldGrooveBuilder

License requirements: ugweld ("UG WELD")
.

setSeedReverseDirection(boolean) - Method in interface nxopen.features.ExtractFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setSeeds(SearchResultElement[]) - Method in interface nxopen.assemblies.ProximitySearchTermBuilder

Set the proximity search term seed elements.

setSeeThru(boolean) - Method in interface nxopen.preferences.SessionVisualizationShade

Deprecated.

Deprecated in NX8.5.0. See SessionVisualizationEmphasis .

setSeeThruAll(boolean) - Method in interface nxopen.preferences.SessionVisualizationEmphasis

Sets the setting that controls whether or not all less important objects are de-emphasized.

setSeeThruDeEmphasizedObjects(boolean) - Method in interface nxopen.preferences.SessionVisualizationEmphasis

Sets the setting that controls whether or not See-Thru is applied to de-emphasized objects.

setSeeThruDeEmphasizedObjects(boolean) - Method in interface nxopen.preferences.SessionVisualizationShade

Deprecated.

Deprecated in NX8.5.0. Use SessionVisualizationEmphasis.setSeeThruDeEmphasizedObjects(boolean) instead.

setSeeThruPreview(boolean) - Method in interface nxopen.preferences.SessionVisualizationEmphasis

Sets the setting that controls whether or not all less important objects are de-emphasized related to the Model Preview.

setSeeThruSection(boolean) - Method in interface nxopen.preferences.SessionVisualizationEmphasis

Sets the setting that controls whether or not geometry on the section plane is emphasized.

setSeeThruSection(boolean) - Method in interface nxopen.preferences.SessionVisualizationShade

Deprecated.

Deprecated in NX8.5.0. Use SessionVisualizationEmphasis.setSeeThruSection(boolean) instead.

setSeeThruStyle(PartVisualizationEmphasis.SeeThruStyleType) - Method in interface nxopen.preferences.PartVisualizationEmphasis

Sets the See-Thru style that determines how translucency and color are used to de-emphasize shaded geometry.

setSeeThruStyle(SessionVisualizationShade.SeeThruStyleType) - Method in interface nxopen.preferences.SessionVisualizationShade

Deprecated.

Deprecated in NX8.5.0. Use PartVisualizationEmphasis.setSeeThruStyle(nxopen.preferences.PartVisualizationEmphasis.SeeThruStyleType) instead.

setSeeThruStyleOptions(SessionVisualizationShade.SeeThruOptions) - Method in interface nxopen.preferences.SessionVisualizationShade

Deprecated.

Deprecated in NX8.5.0. See PartVisualizationEmphasis .

setSegDirection(Direction) - Method in interface nxopen.die.SteelInsertSegmentChildBuilder

Sets the steel insert seg directions
License requirements: ug_die_design ("Die Design")
.

setSegment(Line) - Method in interface nxopen.mechanicalrouting.EditPointBuilder

License requirements: routing_base ("Routing Basic")
.

setSegment(Line) - Method in interface nxopen.routing.RouteSegmentFont

Sets
License requirements: routing_base ("Routing Basic")
.

setSegmentationOption(AestheticFaceBlendBuilder.SegmentationType) - Method in interface nxopen.features.AestheticFaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setSegmentBlendFaces(boolean) - Method in interface nxopen.features.EdgeBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSegmentConstraints(int[], double[]) - Method in interface nxopen.AutomaticTraceline

Sets the segment constraints of the traceline
License requirements: assemblies ("ASSEMBLIES MODULE")
.

setSegmentInteriorPart(Component) - Method in interface nxopen.routing.ISegment

Set a segment to be interior to supplied part
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setSegmentLength(double) - Method in interface nxopen.mechanicalrouting.EditPointBuilder

License requirements: routing_base ("Routing Basic")
.

setSegmentLength(boolean) - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. Use WeldGrooveBuilder.method() and WeldGrooveBuilder.setMethod(nxopen.weld.WeldGrooveBuilder.SkipWeldMethod) instead.

setSegmentLength(String) - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. Use WeldGrooveBuilder.segmentLength() instead.

setSegmentRoundingMethod(LayoutLengthOptions.RoundingMethod) - Method in interface nxopen.formboard.LayoutLengthOptions

License requirements: routing_harness ("Routing Harness")
.

setSegments(int) - Method in interface nxopen.features.FitCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSegments(int) - Method in interface nxopen.features.RapidSurfaceBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setSegments(int) - Method in interface nxopen.geometricutilities.CurveFitData

License requirements: None.

setSegmentScalingData(HumanData.SegmentScalingType, double, double, double) - Method in interface nxopen.features.HumanBuilder

Set segment data for segment scaling
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setSegmentSitesName(String[]) - Method in interface nxopen.features.HumanBuilder

Set the segment site name of edit human display.

setSegmentsOrPatches(int) - Method in interface nxopen.geometricutilities.DegreesAndSegmentsOrPatchesBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setSegmentTable(CamProfile) - Method in interface nxopen.mechatronics.CamProfileBuilder

Set segment table.

setSegmentType(SectionLineSegmentPointBuilder.SegmentTypes) - Method in interface nxopen.drawings.SectionLineSegmentPointBuilder

License requirements: drafting ("DRAFTING")
.

setSegmentType(SegmentBuilder.TypeChoices) - Method in interface nxopen.motion.SegmentBuilder

License requirements: mechanisms ("MECHANISMS")
.

setSegPoint(IOrientation) - Method in interface nxopen.die.SteelInsertSegmentChildBuilder

Sets the steel insert seg point or plane
License requirements: ug_die_design ("Die Design")
.

setSelectAll(boolean) - Method in interface nxopen.tooling.UnusedFileManagementBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setSelectAllElements(boolean) - Method in interface nxopen.cae.LaminateElementFilterBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setSelectAllPlies(boolean) - Method in interface nxopen.cae.LaminatePlyFilterBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setSelectAllProjectFeatureCurves(boolean) - Method in interface nxopen.ConvertToFromReferenceBuilder

License requirements: None.

setSelectAssemblyInFolder(String) - Method in interface nxopen.tooling.RenameAndExportComponentBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setSelectAttributeSpreadsheet(String) - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setSelectBodyOption(PolygonFaceOnMeshBuilder.SelectBodyMethod) - Method in interface nxopen.cae.PolygonFaceOnMeshBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setSelectBoundaryPlane1(Plane) - Method in interface nxopen.features.StepBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setSelectBoundaryPlane2(Plane) - Method in interface nxopen.features.StepBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setSelectCamDirection(Direction) - Method in interface nxopen.tooling.DieEngTrimTaskBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setSelectColorSpreadsheet(String) - Method in interface nxopen.tooling.FaceColorManagementBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setSelectDataFile(String) - Method in interface nxopen.tooling.SlugRetentionBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setSelectDatasetsName(String) - Method in interface nxopen.tooling.ValidCheckBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSelected(UIBlock[]) - Method in interface nxopen.blockstyler.SetList

Sets the selected items.

setSelected(int) - Method in interface nxopen.uistyler.MultiSelectList

Specifies particular list items to be selected.

setSelected(int) - Method in interface nxopen.uistyler.SingleSelectList

Specifies particular list items to be selected
License requirements: None.

setSelected(CharacteristicsValueBuilder) - Method in interface nxopen.weld.CharacteristicsBuilder

License requirements: None.

setSelectedAlignment(ViewAlignment) - Method in interface nxopen.drawings.ViewAlignmentBuilder

License requirements: drafting ("DRAFTING")
.

setSelectedArrangement(Arrangement) - Method in interface nxopen.assemblies.ArrangementsBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setSelectedArrangementName(String) - Method in interface nxopen.tooling.ChangeoverManagementBuilder

License requirements: None.

setSelectedCoordinateSystem(Result.CoordinateSystemSource, int) - Method in interface nxopen.cae.ClippingParameters

Set selected coordinate system
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setSelectedCoordinateSystem(Result.CoordinateSystemSource, int) - Method in interface nxopen.cae.ResultParameters

Set selected coordinate system in which results are to be presented Coordinate systems labels defined in a result file can be retrieved using CAE.Result#getResultCoordinateSystems
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Created in NX7.5.1

setSelectedcsys(CoordinateSystem) - Method in interface nxopen.cae.ResultVariable

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setSelectedDesignerIndex(int) - Method in interface nxopen.tooling.ConcurrentDesignManagementBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setSelectedEditEdgeAndFace(Edge, Face) - Method in interface nxopen.features.MatchEdgeBuilder

Sets edge and face
License requirements: features_modeling ("FEATURES MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setSelectedEntityType(PostGraphBuilder.EntityType) - Method in interface nxopen.cae.PostGraphBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setSelectedExpression(TaggedObject) - Method in interface nxopen.blockstyler.ChooseExpression

License requirements: None.

setSelectedFeaList(UFVariant[], int) - Method in interface nxopen.uf.UFMfm

Refer to UF_MFM_set_selected_fea_list for documentation.

setSelectedFeatures(String[]) - Method in interface nxopen.cam.InspectionCreatePathsBuilder

Sets the selected features.

setSelectedIcon(String) - Method in interface nxopen.blockstyler.Node

License requirements: None.

setSelectedInstances(int[], int[]) - Method in interface nxopen.geometricutilities.PatternInstanceEditBuilder

Sets the indices of the selected Pattern Instances whose expressions are to be edited with the expressions provided in the InstanceEditedExpressionsList .

setSelectedItemBooleans(int[]) - Method in interface nxopen.blockstyler.ListBox

Sets the SelectedItemStrings.

setSelectedItemData(TaggedObject, String, String, TaggedObject[]) - Method in interface nxopen.routing.RunItemsBuilder

The selected items data of the run
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setSelectedItemIndex(int) - Method in interface nxopen.blockstyler.ListBox

License requirements: None.

setSelectedItems(int[]) - Method in interface nxopen.blockstyler.ListBox

Sets SelectedItems
License requirements: None.

setSelectedItems(int[]) - Method in interface nxopen.tooling.EdgePatchBuilder

Set the selected items index value.

setSelectedItemString(String) - Method in interface nxopen.blockstyler.ListBox

License requirements: None.

setSelectedItemStrings(String[]) - Method in interface nxopen.blockstyler.ListBox

Sets the SelectedItemStrings.

setSelectedLoadTransferListItem(SimMotionLoadsListItemBuilder) - Method in interface nxopen.cae.SimMotionLoadsBuilder

Sets the selected load transfer item
License requirements: None.

setSelectedNodes(FENode[]) - Method in interface nxopen.cae.responsesimulation.SensorBuilder

Sets the destination nodes
License requirements: nx_response_anlys ("NX Response Analysis")
.

setSelectedNodes(NavigatorNode[]) - Method in interface nxopen.shipdesign.NavigatorView

Sets selected nodes.

setSelectedNonMasterToCopy(LogicalObject, String) - Method in interface nxopen.pdm.NonMasterData

Sets whether or not the non-master part specified will actually get saved during the save as operation.

setSelectedNonMasterToCopy(LogicalObject, String) - Method in interface nxopen.pdm.PartOperationCopyBuilder

Deprecated.

Deprecated in NX11.0.0. Use NonMasterData.setSelectedNonMasterToCopy(nxopen.pdm.LogicalObject, java.lang.String) instead

setSelectedNonMasterToSaveAs(LogicalObject, String) - Method in interface nxopen.pdm.PartOperationBuilder

Deprecated.

Deprecated in NX10.0.0. Use PartOperationCopyBuilder.setSelectedNonMasterToCopy(nxopen.pdm.LogicalObject, java.lang.String) instead

setSelectedObjects(TaggedObject[]) - Method in interface nxopen.blockstyler.BodyCollector

Sets the SelectedObjects
License requirements: None.

setSelectedObjects(TaggedObject[]) - Method in interface nxopen.blockstyler.CurveCollector

Sets the SelectedObjects
License requirements: None.

setSelectedObjects(TaggedObject[]) - Method in interface nxopen.blockstyler.FaceCollector

Sets the SelectedObjects
License requirements: None.

setSelectedObjects(TaggedObject[]) - Method in interface nxopen.blockstyler.SectionBuilder

Sets the SelectedObjects
License requirements: None.

setSelectedObjects(TaggedObject[]) - Method in interface nxopen.blockstyler.SelectElement

Sets the SelectedObjects
License requirements: None.

setSelectedObjects(TaggedObject[]) - Method in interface nxopen.blockstyler.SelectFeature

Sets the SelectedObjects
License requirements: None.

setSelectedObjects(TaggedObject[]) - Method in interface nxopen.blockstyler.SelectNode

Sets the SelectedObjects
License requirements: None.

setSelectedObjects(TaggedObject[]) - Method in interface nxopen.blockstyler.SelectObject

Sets the SelectedObjects
License requirements: None.

setSelectedObjects(TaggedObject[]) - Method in interface nxopen.blockstyler.SelectPartFromList

Sets the SelectedObjects
License requirements: None.

setSelectedObjects(TaggedObject[]) - Method in interface nxopen.blockstyler.SpecifyAxis

Sets the SelectedObjects
License requirements: None.

setSelectedObjects(TaggedObject[]) - Method in interface nxopen.blockstyler.SpecifyCSYS

Sets the SelectedObjects
License requirements: None.

setSelectedObjects(TaggedObject[]) - Method in interface nxopen.blockstyler.SpecifyPlane

Sets the SelectedObjects
License requirements: None.

setSelectedObjects(TaggedObject[]) - Method in interface nxopen.blockstyler.SpecifyPoint

Sets the SelectedObjects
License requirements: None.

setSelectedObjects(TaggedObject[]) - Method in interface nxopen.blockstyler.SpecifyVector

Sets the SelectedObjects
License requirements: None.

setSelectedObjects(TaggedObject[]) - Method in interface nxopen.blockstyler.SuperPoint

Sets the SelectedObjects
License requirements: None.

setSelectedObjects(TaggedObject[]) - Method in interface nxopen.blockstyler.SuperSection

Sets the SelectedObjects
License requirements: None.

setSelectedObjectsSubIDs(int[]) - Method in interface nxopen.blockstyler.SelectElement

Sets the SelectedObjectSubIDs
License requirements: None.

setSelectedOccs(NXObject[], NXObject[]) - Method in interface nxopen.tooling.CreateBoxBuilder

Sets selected object occurrences.

setSelectedOccurrences(NXObject[], NXObject[]) - Method in interface nxopen.features.ToolingBoxBuilder

Sets selected object occurrences.

setSelectedOps(String[]) - Method in interface nxopen.cam.InspectionAnalyzeOutputBuilder

Sets the selected operations.

setSelectedOps(String[]) - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder

Sets the selected operations.

setSelectedOps(CAMObject[]) - Method in interface nxopen.cam.InspectionDeleteMeaPtsBuilder

Sets the selected operations.

setSelectedOps(CAMObject[]) - Method in interface nxopen.cam.InspectionSaveToLayerBuilder

Sets the selected operations.

setSelectedParts(BasePart[]) - Method in interface nxopen.pdm.PartOperationBuilder

Deprecated.

Deprecated in NX10.0.0. Use PartOperationCopyBuilder.setSelectedPartsToCopy(nxopen.BasePart[]) instead

setSelectedPartsToCopy(BasePart[]) - Method in interface nxopen.pdm.PartOperationCopyBuilder

Sets the selected parts.

setSelectedPlyNames(String[]) - Method in interface nxopen.cae.LaminatePlyFilterBuilder

Sets the selected plies
License requirements: nx_lam_composites ("Laminate Composites")
.

setSelectedPolesIndex(int[]) - Method in interface nxopen.features.PoleSmoothingBuilder

Sets the index of selected poles
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setSelectedReferenceCsys(int) - Method in interface nxopen.cae.FreeBodyResultsBuilder

The selected reference coordinate system
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setSelectedReferenceCsysSource(Result.CoordinateSystemSource) - Method in interface nxopen.cae.FreeBodyResultsBuilder

The source for the selected reference coordinate system
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setSelectedRegions(String[]) - Method in interface nxopen.tooling.MWDefineSheetsBuilder

Set the selected regions in the tree list
License requirements: None.

setSelectedResults(String[], String[], String[]) - Method in interface nxopen.cae.LaminatePostReportBuilder

Deprecated.

Deprecated in NX11.0.0. Use NXOpen.CAE.LaminatePostReport.SetSelectedSolutions instead.

setSelectedSegment(NXObject) - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder

License requirements: nx_penetration_mgmt ("Penetration Management")
.

setSelectedSegmentType(GuidedExtensionBuilderEx.SegmentType) - Method in interface nxopen.features.GuidedExtensionBuilderEx

Sets the segment type for the selected segment.

setSelectedSegmentType(GuidedExtensionBuilder.SegmentType) - Method in interface nxopen.tooling.GuidedExtensionBuilder

Sets the segment type for the selected segment.

setSelectedSheets(int) - Method in interface nxopen.PlotSourceBuilder

License requirements: None.

setSelectedSolutions(String[], boolean[], String[], String[]) - Method in interface nxopen.cae.LaminatePostReportBuilder

Set the selected results
License requirements: nx_lam_composites ("Laminate Composites")
.

setSelectedStandardPartData(String, String) - Method in interface nxopen.tooling.StandardPartData

Assign selected standard part data to the client data
License requirements: ug_mold_design ("UG MOLD")
.

setSelectedStock(Stock) - Method in interface nxopen.routing.PathStockBuilder

Set the selected stock
License requirements: routing_base ("Routing Basic")
.

setSelectedSurfaces(Face[]) - Method in interface nxopen.cam.InspectionCurveFeatureBuilder

Sets the curve underlying selected surfaces
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSelectedView(ModelingView) - Method in interface nxopen.drawings.AddRemoveBoxViewBuilder

License requirements: None.

setSelectedView(ModelingView) - Method in interface nxopen.drawings.SelectModelViewBuilder

License requirements: drafting ("DRAFTING")
.

setSelectEndPlane(Plane) - Method in interface nxopen.tooling.DieEngTrimTaskBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setSelectFrom(CornerDesignBuilder.SelectFromOpt) - Method in interface nxopen.tooling.CornerDesignBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setSelectGeometryProjectedAsArcs(ViewWorkflowBuilder.Splarcs) - Method in interface nxopen.drawings.ViewWorkflowBuilder

License requirements: None.

setSelectGridArea(PickRectanglePointsBuilder) - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setSelectHoleAxis(Direction) - Method in interface nxopen.tooling.FaceColorManagementBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setSelectHolesAccordingToAttribute(boolean) - Method in interface nxopen.tooling.HoleDatumSymbolBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setSelectHolesAutomatically(boolean) - Method in interface nxopen.tooling.AutoDimensionBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setSelection(Preferences.GeometryTypes, Preferences.SelectionTypes) - Method in interface nxopen.cam.Preferences

The geometry selection type method
License requirements: cam_base ("CAM BASE")
.

setSelection(String) - Method in interface nxopen.tooling.SelectReuseLibraryItemBuilder

Sets the path of the file from the reuse library
License requirements: None.

setSelectionAreaType(TBSGroupDefinition.GroupElementType) - Method in interface nxopen.cae.optimization.TBSBaseDesignVariableBuilder

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setSelectionCallbacks(SelectionHandle, Selection.FilterCallback, Selection.SelectionCallback) - Method in interface nxopen.Selection

Deprecated.

Deprecated in NX8.0.0. Use Selection.setTaggedObjectSelectionCallbacks(nxopen.SelectionHandle, nxopen.Selection.FilterTaggedObjectCallback, nxopen.Selection.TaggedObjectSelectionCallback) instead

setSelectionColor(int) - Method in interface nxopen.preferences.PartVisualizationColorSetting

Sets the selection color.

setSelectionFilter(String, Selection.SelectionAction, Selection.MaskTriple[]) - Method in interface nxopen.blockstyler.PropertyList

Sets the filter for the given property name.

setSelectionFilter(Selection.SelectionAction, Selection.MaskTriple[]) - Method in interface nxopen.blockstyler.SelectObject

Sets the SelectionFilter
License requirements: None.

setSelectionFilter(ObjectAttributeManagementBuilder.FilterType) - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setSelectionFilterAccordingToAttribute(ObjectAttributeManagementBuilder.FilterAccordingToAttributeType) - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setSelectionFilterToggle(boolean) - Method in interface nxopen.cae.MeshControlBuilder

License requirements: None.

setSelectionMask(SelectionHandle, Selection.SelectionAction, Selection.MaskTriple[]) - Method in interface nxopen.Selection

Sets the types of objects that are selectable.

setSelectionMethod(DPMItpBuilder.SelectionMethodOption) - Method in interface nxopen.cam.DPMItpBuilder

License requirements: cam_base ("CAM BASE")
.

setSelectionMethod(MaterialEstimationBuilder.SelectionMethods) - Method in interface nxopen.features.shipdesign.MaterialEstimationBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setSelectionMethod(WeightAndCGBuilder.SelectionMethods) - Method in interface nxopen.features.shipdesign.WeightAndCGBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setSelectionMethodType(SurfaceCoatBuilder.SelectionMethod) - Method in interface nxopen.cae.SurfaceCoatBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setSelectionModeAsString(String) - Method in interface nxopen.blockstyler.Tree

License requirements: None.

setSelectionOption(TBSLoadCaseManager.SelectionType) - Method in interface nxopen.cae.optimization.TBSLoadCaseManager

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setSelectionParameters(PostScenarioSelectionParameters) - Method in interface nxopen.cae.PostScenarioBuilder

Set the PostScenarioSelectionParameters .

setSelectionRadiusType(SelPref.SelectionRadius) - Method in interface nxopen.display.SelPref

License requirements: None.

setSelectionRuleType(SelPref.SelectionRule) - Method in interface nxopen.display.SelPref

License requirements: None.

setSelectionScope(LoadInterpartDataBuilder.SelectionScopeType) - Method in interface nxopen.assemblies.LoadInterpartDataBuilder

License requirements: wave ("WAVE FUNCTIONALITY")
.

setSelectionScope(ObjectSelector.Scope) - Method in interface nxopen.ObjectSelector

License requirements: None.

setSelectionStatusOfUserDefinedClass(UserDefinedClass, boolean) - Method in interface nxopen.Selection

Sets whether or not the user defined class is available for selection.

setSelectionType(BoundaryBuilder.SelectionMethod) - Method in interface nxopen.annotations.BoundaryBuilder

License requirements: drafting ("DRAFTING")
.

setSelectionType(ConvertDraftingContentsBuilder.SelectConversionEntityType) - Method in interface nxopen.drawings.ConvertDraftingContentsBuilder

License requirements: convert_to_pmi (" Convert To PMI"), drafting ("DRAFTING")
.

setSelectionType(EndCutBuilder.SelectionTypes) - Method in interface nxopen.features.shipdesign.EndCutBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setSelectionType(MirrorShipStructureBuilder.Types) - Method in interface nxopen.features.shipdesign.MirrorShipStructureBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setSelectionType(ShipCoordinatesBuilder.Selection) - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design") OR routing_base ("Routing Basic")
.

setSelectionType(VerifyPenetrationBuilder.SelectionDialogType) - Method in interface nxopen.features.shipdesign.VerifyPenetrationBuilder

License requirements: nx_penetration_mgmt ("Penetration Management")
.

setSelectionType(HoleReportBuilder.EnumSelectionType) - Method in interface nxopen.tooling.HoleReportBuilder

License requirements: None.

setSelectionType(RemoveHolesBuilder.SelectionTypes) - Method in interface nxopen.tooling.RemoveHolesBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setSelectionType(WeldSelectionType) - Method in interface nxopen.weld.WeldPointBuilder

Set the selection type
License requirements: ugweld ("UG WELD")
.

setSelectMask(int, int, int[]) - Method in interface nxopen.uf.UFUi

Refer to UF_UI_set_select_mask for documentation.

setSelectMethod(BooleanRegionSelect.SelectOption) - Method in interface nxopen.geometricutilities.BooleanRegionSelect

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSelectMode(ImportAutocadBlockBuilder.FileFolder) - Method in interface nxopen.annotations.ImportAutocadBlockBuilder

License requirements: nx_layout ("NX Layout")
.

setSelectMode(ImportSymbolBuilder.FileFolder) - Method in interface nxopen.annotations.ImportSymbolBuilder

License requirements: nx_layout ("NX Layout")
.

setSelectModeAsString(String) - Method in interface nxopen.blockstyler.BodyCollector

License requirements: None.

setSelectModeAsString(String) - Method in interface nxopen.blockstyler.CurveCollector

License requirements: None.

setSelectModeAsString(String) - Method in interface nxopen.blockstyler.FaceCollector

License requirements: None.

setSelectModeAsString(String) - Method in interface nxopen.blockstyler.SelectElement

License requirements: None.

setSelectModeAsString(String) - Method in interface nxopen.blockstyler.SelectFeature

License requirements: None.

setSelectModeAsString(String) - Method in interface nxopen.blockstyler.SelectNode

License requirements: None.

setSelectModeAsString(String) - Method in interface nxopen.blockstyler.SelectObject

License requirements: None.

setSelectOffsetSpreadsheet(String) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setSelectOption(CopyPasteBuilder.ParentSelectOption) - Method in interface nxopen.features.CopyPasteBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSelectPlane(Plane) - Method in interface nxopen.geometricutilities.FacePlaneSelectionBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSelectPoint(Point) - Method in interface nxopen.cam.InspectionEdgePointFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSelectPoint(Point) - Method in interface nxopen.cam.InspectionPointFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSelectPoint(Point) - Method in interface nxopen.drafting.MoveToDrawingViewBuilder

License requirements: nx_layout ("NX Layout")
.

setSelectPoint(Point) - Method in interface nxopen.linedesigner.RailOpeningFeatureBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setSelectPoint(Point) - Method in interface nxopen.tooling.SectionLineCreationBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setSelectPoint(Point) - Method in interface nxopen.tooling.SlugRetentionBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setSelectSectionOri(Direction) - Method in interface nxopen.cae.BeamEADBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setSelectSpreadsheet(String) - Method in interface nxopen.tooling.HoleDatumSymbolBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setSelectStandardSetsSpreadsheet(String) - Method in interface nxopen.tooling.ValidCheckBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setSelectStartPlane(Plane) - Method in interface nxopen.tooling.DieEngTrimTaskBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setSelectSubHoleFaceAutomatically(boolean) - Method in interface nxopen.tooling.FaceColorManagementBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setSelectSubTypeAsString(String) - Method in interface nxopen.blockstyler.SelectElement

License requirements: None.

setSelectToolFlag(boolean) - Method in interface nxopen.cam.OperationBuilder

License requirements: cam_base ("CAM BASE")
.

setSelectType(SelectionHandle, Selection.UistylerSelectionType) - Method in interface nxopen.Selection

Sets the selection type.

setSelectTypes(PocketBuilder.ToolType) - Method in interface nxopen.tooling.PocketBuilder

License requirements: None.

setSelectUV(int) - Method in interface nxopen.features.SnipSurfaceBuilder

License requirements: None.

setSelectVector(Direction) - Method in interface nxopen.tooling.DieInsertBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setSelectVector(Direction) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setSelfHidden(boolean) - Method in interface nxopen.drawings.HiddenLinesViewStyle

Sets the status of self hidden.

setSelfHidden(boolean) - Method in interface nxopen.drawings.ViewStyleHiddenLinesBuilder

License requirements: drafting ("DRAFTING")
.

setSelfHidden(boolean) - Method in interface nxopen.preferences.HiddenLinesViewPreferences

Sets the status of self hidden.

setSelfIntersection(boolean) - Method in interface nxopen.cam.MillCutParameters

License requirements: cam_base ("CAM BASE")
.

setSelfIntersectionChecking(TBSSmoothBuilder.SelfIntersectionCheckingOption) - Method in interface nxopen.cae.optimization.TBSSmoothBuilder

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setSelfIntersections(CleanupFacetBodyBuilder.CleanupOptions) - Method in interface nxopen.facet.CleanupFacetBodyBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setSelFootType(SubInsertBuilder.Shape) - Method in interface nxopen.tooling.SubInsertBuilder

License requirements: None.

setSelType(EdgePatchBuilder.SelectTypes) - Method in interface nxopen.tooling.EdgePatchBuilder

License requirements: None.

setSelType(ElectrodeCopyBuilder.Copy) - Method in interface nxopen.tooling.ElectrodeCopyBuilder

License requirements: None.

setSemiMajor(double) - Method in interface nxopen.weld.WeldBeadSizeBuilder

License requirements: ugweld ("UG WELD")
.

setSemiMinor(double) - Method in interface nxopen.weld.WeldBeadSizeBuilder

License requirements: ugweld ("UG WELD")
.

setSendLayoutsTo(DxfdwgImporter.SendLayoutsAs) - Method in interface nxopen.DxfdwgImporter

License requirements: None.

setSendModelDataTo(DxfdwgImporter.SendModelDataAs) - Method in interface nxopen.DxfdwgImporter

License requirements: None.

setSensitivity(int, boolean) - Method in interface nxopen.uistyler.ButtonLayout

Sets the sensitivity
License requirements: None.

setSensitivity(boolean) - Method in interface nxopen.uistyler.ColorTool

Sets the sensitivity
License requirements: None.

setSensitivity(boolean) - Method in interface nxopen.uistyler.DialogItem

Specifies the sensitivity of the dialog.

setSensitivity(boolean) - Method in interface nxopen.uistyler.GroupBox

Sets the sensitivity
License requirements: None.

setSensitivity(boolean) - Method in interface nxopen.uistyler.IntegerItem

Sets the sensitivity of Integer item
License requirements: None.

setSensitivity(boolean) - Method in interface nxopen.uistyler.IntegerScale

Sets the sensitivity of the dialog item.

setSensitivity(boolean) - Method in interface nxopen.uistyler.LabelItem

Sets the seisitivity of the dialog item
License requirements: None.

setSensitivity(boolean) - Method in interface nxopen.uistyler.MultiSelectList

Sets the senstivity
License requirements: None.

setSensitivity(boolean) - Method in interface nxopen.uistyler.MultiTextBox

Sets the sensitivity of the dialog item.

setSensitivity(int, boolean) - Method in interface nxopen.uistyler.OptionMenu

Sets the sensitivity
License requirements: None.

setSensitivity(int, boolean) - Method in interface nxopen.uistyler.OptionToggle

Set the sesitivity
License requirements: None.

setSensitivity(boolean) - Method in interface nxopen.uistyler.PropertyPage

Sets the sensitivity of property page.

setSensitivity(boolean) - Method in interface nxopen.uistyler.PushButton

Sets the senstivity of dialog.

setSensitivity(int, boolean) - Method in interface nxopen.uistyler.RadioBox

Sets the sensitivity
License requirements: None.

setSensitivity(boolean) - Method in interface nxopen.uistyler.RealItem

Sets the sensitivity
License requirements: None.

setSensitivity(boolean) - Method in interface nxopen.uistyler.RealScale

Sets the sensitivity
License requirements: None.

setSensitivity(boolean) - Method in interface nxopen.uistyler.RowColumn

Sets the sensitivity
License requirements: None.

setSensitivity(boolean) - Method in interface nxopen.uistyler.ScrolledWindow

Sets
License requirements: None.

setSensitivity(boolean) - Method in interface nxopen.uistyler.SelectionBox

Sets the sensitivity of the selection box
License requirements: None.

setSensitivity(boolean) - Method in interface nxopen.uistyler.SingleSelectList

Sets the sensitivity of the single select list
License requirements: None.

setSensitivity(boolean) - Method in interface nxopen.uistyler.StringItem

Specifies the sensitivity of the dialog item.

setSensitivity(boolean) - Method in interface nxopen.uistyler.TabControl

Sets the sensitivity of the dialog item
License requirements: None.

setSensitivity(int, boolean) - Method in interface nxopen.uistyler.Toggle

Sets the sensitivity of the toggle button
License requirements: None.

setSensitivity(int, boolean) - Method in interface nxopen.uistyler.ToolPalette

License requirements: None.

setSensitivity(boolean) - Method in interface nxopen.uistyler.WideString

Sets the sensitivity of the wide string
License requirements: None.

setSensitivityValues(double[]) - Method in interface nxopen.cae.ModelUpdateSensitivityViewerBuilder

Sets the sensitivity values
License requirements: nx_correl_update ("FE Model Update")
.

setSensor(NXObject) - Method in interface nxopen.motion.PlantOutputBuilder

License requirements: nx_motion_cosim ("NX Motion CoSimulation")
.

setSensor(MotionSensor) - Method in interface nxopen.motion.SignalChartListItem

License requirements: nx_motion_motor ("NX Motion Motor")
.

setSensorCoordinateType(SensorCoordinateType) - Method in interface nxopen.cae.responsesimulation.SensorBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setSensorDirectionX(boolean) - Method in interface nxopen.cae.responsesimulation.SensorBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setSensorDirectionY(boolean) - Method in interface nxopen.cae.responsesimulation.SensorBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setSensorDirectionZ(boolean) - Method in interface nxopen.cae.responsesimulation.SensorBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setSensorGroup(InspectionGroup) - Method in interface nxopen.cam.InspectionCreatePathsBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSensorName(String) - Method in interface nxopen.cam.InspectionCmmCommandBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSensorName(String) - Method in interface nxopen.cam.InspectionSensorMassEditBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSensorOpLabel(String) - Method in interface nxopen.cam.InspectionSensorBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSensorOpName(String) - Method in interface nxopen.cam.InspectionCreatePathsBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSensorOpName(String) - Method in interface nxopen.cam.InspectionMoveBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSensorOpName(String) - Method in interface nxopen.cam.InspectionSensorBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSensorResultType(SensorResultType) - Method in interface nxopen.cae.responsesimulation.SensorBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setSensorRotationX(boolean) - Method in interface nxopen.cae.responsesimulation.SensorBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setSensorRotationY(boolean) - Method in interface nxopen.cae.responsesimulation.SensorBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setSensorRotationZ(boolean) - Method in interface nxopen.cae.responsesimulation.SensorBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setSensorStrategy(InspectionMoveBuilder.SensorStrategyTypes) - Method in interface nxopen.cam.InspectionCreatePathsBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSensorStrategy(InspectionMoveBuilder.SensorStrategyTypes) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSensorStrategy(InspectionMoveBuilder.SensorStrategyTypes) - Method in interface nxopen.cam.InspectionMoveBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSensorStrategy(InspectionSensorMassEditBuilder.SensorStrategyType) - Method in interface nxopen.cam.InspectionSensorMassEditBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSensorTipDiameter(double) - Method in interface nxopen.cam.InspectionSensorBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSensorTipIjk(double[]) - Method in interface nxopen.cam.InspectionSensorBuilder

Set the sensor tip location vector coordinates
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSensorTipLength(double) - Method in interface nxopen.cam.InspectionSensorBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSensorTipLocation(InspectionSensorBuilder.SensorTipLocationTypes) - Method in interface nxopen.cam.InspectionSensorBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSensorTipSize(double) - Method in interface nxopen.cam.InspectionSensorBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSensorTipType(InspectionSensorBuilder.SensorTipTypes) - Method in interface nxopen.cam.InspectionSensorBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSensorTipXyz(double[]) - Method in interface nxopen.cam.InspectionSensorBuilder

Set the sensor tip location cartesian coordinates
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSensorType(SensorType) - Method in interface nxopen.cae.responsesimulation.SensorBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setSensorType(InspectionSensorBuilder.SensorTypes) - Method in interface nxopen.cam.InspectionSensorBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSensorVector(Direction) - Method in interface nxopen.cae.responsesimulation.SensorBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setSeparator(ChamferSeparatorType) - Method in interface nxopen.annotations.ChamferDimensionPreferences

Sets the separator type
License requirements: None.

setSeparator(String) - Method in interface nxopen.drawings.ViewSettingsBuilder

License requirements: convert_to_pmi (" Convert To PMI"), drafting ("DRAFTING")
.

setSequence(TurnRoughFinishTestCut.SequenceTypes) - Method in interface nxopen.cam.TurnRoughFinishTestCut

License requirements: cam_base ("CAM BASE")
.

setSequenceDescription(Tag, String) - Method in interface nxopen.uf.UFAssem

Refer to UF_ASSEM_set_sequence_description for documentation.

setSequenceMethod(BranchPathNumberingBuilder.Sequence) - Method in interface nxopen.routing.BranchPathNumberingBuilder

License requirements: routing_hvac ("Routing HVAC")
.

setSequenceName(Tag, String) - Method in interface nxopen.uf.UFAssem

Refer to UF_ASSEM_set_sequence_name for documentation.

setSequenceNumber(int) - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. This functionality is no longer supported.

setSequenceNumber(int) - Method in interface nxopen.weld.WeldPointBuilder

Sets the sequence number for the weld point feature.

setSequenceOptimization(InspectionPathBuilder.SequenceType) - Method in interface nxopen.cam.InspectionPathBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSequenceOptimization(InspectionPathBuilder.SequenceType) - Method in interface nxopen.cam.InspectionUVGridBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSeriesSpacing(double) - Method in interface nxopen.display.DynamicSectionBuilder

License requirements: None.

setServerProgID(String) - Method in interface nxopen.mechatronics.OPCClientBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setServerType(OPCClientBuilder.ServerOption) - Method in interface nxopen.mechatronics.OPCClientBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setSessionBannerOptions(UFPlot.BannerOptions) - Method in interface nxopen.uf.UFPlot

Refer to UF_PLOT_set_session_banner_options for documentation.

setSessionCustomColors(UFCgm.CustomColors) - Method in interface nxopen.uf.UFCgm

Refer to UF_CGM_set_session_custom_colors for documentation.

setSessionCustomColors(UFCgm.CustomColors) - Method in interface nxopen.uf.UFPlot

Refer to UF_PLOT_set_session_custom_colors for documentation.

setSessionCustomWidths(UFCgm.CustomWidths) - Method in interface nxopen.uf.UFCgm

Refer to UF_CGM_set_session_custom_widths for documentation.

setSessionCustomWidths(UFCgm.CustomWidths) - Method in interface nxopen.uf.UFPlot

Refer to UF_PLOT_set_session_custom_widths for documentation.

setSessionDelay(boolean) - Method in interface nxopen.uf.UFWave

Refer to UF_WAVE_set_session_delay for documentation.

setSessionExportOptions(UFCgm.ExportOptions) - Method in interface nxopen.uf.UFCgm

Refer to UF_CGM_set_session_export_options for documentation.

setSessionJobOptions(UFPlot.JobOptions) - Method in interface nxopen.uf.UFPlot

Refer to UF_PLOT_set_session_job_options for documentation.

setSessionNotes(String[]) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

Set the notes that are to be stored with the tire envelope feature.

setSessionTranslucency(ObjectPreferences.Translucency) - Method in interface nxopen.preferences.ObjectPreferences

Sets the session translucency
License requirements: None.

setSetAsMyDefaultTask(boolean) - Method in interface nxopen.tooling.ConcurrentDesignManagementBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setSetback(DeleteFaceBuilder.SetbackOptions) - Method in interface nxopen.features.DeleteFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setSetbackMethod(StiffenerBySupportPathBuilder.SetBackMethod) - Method in interface nxopen.features.shipdesign.StiffenerBySupportPathBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setSetbackOption(EdgeBlendBuilder.Setback) - Method in interface nxopen.features.EdgeBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSetbackPoint(Point) - Method in interface nxopen.geometricutilities.BlendSetbackBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSetMatOriMethod(ShellEADBuilder.MaterialOrientationMethod) - Method in interface nxopen.cae.ShellEADBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setSettings(CreateComponentFrom3DSettingsBuilder) - Method in interface nxopen.layout2d.CreateComponentFrom3DBuilder

License requirements: None.

setSettingsFile(String) - Method in interface nxopen.AcisExporter

License requirements: None.

setSettingsFile(String) - Method in interface nxopen.AcisImporter

License requirements: None.

setSettingsFile(String) - Method in interface nxopen.annotations.ImportAutocadBlockBuilder

License requirements: nx_layout ("NX Layout")
.

setSettingsFile(String) - Method in interface nxopen.Catiav4Creator

License requirements: None.

setSettingsFile(String) - Method in interface nxopen.Catiav4Importer

License requirements: None.

setSettingsFile(String) - Method in interface nxopen.Catiav5Creator

License requirements: None.

setSettingsFile(String) - Method in interface nxopen.Catiav5Importer

License requirements: None.

setSettingsFile(String) - Method in interface nxopen.DxfdwgCreator

License requirements: None.

setSettingsFile(String) - Method in interface nxopen.DxfdwgImporter

License requirements: None.

setSettingsFile(String) - Method in interface nxopen.IgesCreator

License requirements: None.

setSettingsFile(String) - Method in interface nxopen.IgesImporter

License requirements: None.

setSettingsFile(String) - Method in interface nxopen.ProeImporter

License requirements: None.

setSettingsFile(String) - Method in interface nxopen.Step203Creator

Deprecated.

Deprecated in NX11.0.0. Use StepCreator instead.

setSettingsFile(String) - Method in interface nxopen.Step203Importer

License requirements: None.

setSettingsFile(String) - Method in interface nxopen.Step214Creator

Deprecated.

Deprecated in NX11.0.0. Use StepCreator instead.

setSettingsFile(String) - Method in interface nxopen.Step214Importer

License requirements: None.

setSettingsFile(String) - Method in interface nxopen.Step242Importer

License requirements: None.

setSettingsFile(String) - Method in interface nxopen.StepCreator

License requirements: None.

setSettingsOrigination(GeneralWorkFlowBuilder.SettingsOrientationType) - Method in interface nxopen.drawings.GeneralWorkFlowBuilder

License requirements: drafting ("DRAFTING")
.

setSettingsToggle(boolean) - Method in interface nxopen.features.MapleBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSettingWithoutFalseBody(boolean) - Method in interface nxopen.tooling.GeneralInsertBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setSettingWithoutFalseBody(boolean) - Method in interface nxopen.tooling.PiercingInsertBuilder

License requirements: None.

setSetup(InspectionSetup) - Method in interface nxopen.cam.InspectionCreatePathsBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSetup(String) - Method in interface nxopen.sim.KinematicChain

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setSeverityOption(RequirementBuilder.SeverityOptions) - Method in interface nxopen.validate.RequirementBuilder

License requirements: None.

setSew(boolean) - Method in interface nxopen.AcisImporter

License requirements: None.

setSewAllFaces(boolean) - Method in interface nxopen.features.AestheticFaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setSewAllFaces(boolean) - Method in interface nxopen.features.FaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSewAllInstances(boolean) - Method in interface nxopen.features.SewBuilder

Deprecated.

Deprecated in NX9.0.0. This is for pre NX8 usage; new features cannot be created by using this option in NX8 or later, it is safe to remove this call for post-NX8.

setSewn(boolean) - Method in interface nxopen.die.AddSurfBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setSewSurfaces(boolean) - Method in interface nxopen.IgesImporter

License requirements: None.

setSewSurfaces(boolean) - Method in interface nxopen.Step203Importer

License requirements: None.

setSewSurfaces(boolean) - Method in interface nxopen.Step214Importer

License requirements: None.

setSewSurfaces(boolean) - Method in interface nxopen.Step242Importer

License requirements: None.

setSewToBody(boolean) - Method in interface nxopen.features.BlendCornerBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setSewTolerance(double) - Method in interface nxopen.tooling.DieEngStampingOutputBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setSewTolerance(double) - Method in interface nxopen.tooling.MWDefineSheetsBuilder

License requirements: None.

setSgrpCoordinates(String, String, String) - Method in interface nxopen.HumanPosturePredictionBuilder

Set the SgRP point by coordinates, L31, W20, H70
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setSgrpPoint(Point) - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSgrpPoint(Point) - Method in interface nxopen.HumanPosturePredictionBuilder

Set the SgRP point by an existing point
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setShadedAlignFacets(boolean) - Method in interface nxopen.display.FacetSettingsBuilder

License requirements: None.

setShadedAngleTol(FacetSettingsBuilder.ShadedToleranceSetting, double) - Method in interface nxopen.display.FacetSettingsBuilder

Sets the angle tolerance for a given tolerance set for Shaded Views
License requirements: None.

setShadedCutFaceColor(int) - Method in interface nxopen.drawings.ShadingViewStyle

Sets the shaded cut face color.

setShadedCutFaceColor(int) - Method in interface nxopen.preferences.ShadingViewPreferences

Sets the shaded cut face color.

setShadedDisplay(boolean) - Method in interface nxopen.annotations.PmiPreferences

License requirements: None.

setShadedEdgeColor(NXColor) - Method in interface nxopen.cae.MeshCollectorDisplayDefaults2d

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setShadedEdgeColor(NXColor) - Method in interface nxopen.cae.MeshCollectorDisplayDefaults3d

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setShadedEdgeColor(NXColor) - Method in interface nxopen.cae.MeshDisplaySettings2d

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setShadedEdgeColor(NXColor) - Method in interface nxopen.cae.MeshDisplaySettings3d

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setShadedEdgeColor(int) - Method in interface nxopen.preferences.ViewVisualizationVisual

Sets the edge color for shaded faces in the view.

setShadedEdgeOptions(Tag) - Method in interface nxopen.uf.UFView

Refer to UF_VIEW_set_shaded_edge_options for documentation.

setShadedEdgeStyle(ViewVisualizationVisual.ShadedEdgeStyleType) - Method in interface nxopen.preferences.ViewVisualizationVisual

Sets the edge display style for shaded faces in the view.

setShadedEdgeTol(FacetSettingsBuilder.ShadedToleranceSetting, double) - Method in interface nxopen.display.FacetSettingsBuilder

Sets the edge toleramce for a given tolerance set for Shaded Views
License requirements: None.

setShadedFaceTol(FacetSettingsBuilder.ShadedToleranceSetting, double) - Method in interface nxopen.display.FacetSettingsBuilder

Sets the face tolerance for a given tolerance set for Shaded Views
License requirements: None.

setShadedFacetRatio(double) - Method in interface nxopen.display.FacetSettingsBuilder

Deprecated.

Deprecated in NX9.0.0. Refer to FacetSettingsBuilder.setShadedRefinementFactor(double) instead

setShadedFacetScale(FacetSettingsBuilder.FacetScale) - Method in interface nxopen.display.FacetSettingsBuilder

License requirements: None.

setShadedFacetScaleRatio(double) - Method in interface nxopen.preferences.PartVisualizationShade

Deprecated.

Deprecated in NX9.0.0. Refer to Display.FacetSettingsBuilder#setShadedRefinementFactor instead

setShadedFacetToViewRatio(FacetSettingsBuilder.FacetToViewRatio) - Method in interface nxopen.display.FacetSettingsBuilder

Deprecated.

Deprecated in NX9.0.0. Refer to FacetSettingsBuilder.setShadedFacetScale(nxopen.display.FacetSettingsBuilder.FacetScale) instead

setShadedFacetToViewScale(boolean) - Method in interface nxopen.preferences.PartVisualizationShade

Deprecated.

Deprecated in NX9.0.0. Refer to Display.FacetSettingsBuilder#setShadedFacetScale instead

setShadedGeometry(boolean) - Method in interface nxopen.CGMBuilder

License requirements: None.

setShadedGeometry(boolean) - Method in interface nxopen.PlotBuilder

License requirements: None.

setShadedGeometry(boolean) - Method in interface nxopen.PrintBuilder

License requirements: None.

setShadedGeometry(boolean) - Method in interface nxopen.PrintPDFBuilder

License requirements: None.

setShadedPlane(boolean) - Method in interface nxopen.annotations.CuttingPlaneSymbolBuilder

License requirements: geometric_tol ("GDT")
.

setShadedRefinementFactor(double) - Method in interface nxopen.display.FacetSettingsBuilder

License requirements: None.

setShadedTolerance(FacetSettingsBuilder.ShadedToleranceSetting) - Method in interface nxopen.display.FacetSettingsBuilder

License requirements: None.

setShadedUpdate(FacetSettingsBuilder.FacetUpdate) - Method in interface nxopen.display.FacetSettingsBuilder

License requirements: None.

setShadedViewAngleTolerance(double) - Method in interface nxopen.preferences.PartVisualizationShade

Deprecated.

Deprecated in NX8.0.0. Use PartVisualizationShade.getShadedViewFacetTolerances(nxopen.preferences.PartVisualizationShade.ShadedViewToleranceType) and PartVisualizationShade.setShadedViewFacetTolerances(nxopen.preferences.PartVisualizationShade.ShadedViewToleranceType, double, double, double) instead.

setShadedViewEdgeTolerance(double) - Method in interface nxopen.preferences.PartVisualizationShade

Deprecated.

Deprecated in NX8.0.0. Use PartVisualizationShade.getShadedViewFacetTolerances(nxopen.preferences.PartVisualizationShade.ShadedViewToleranceType) and PartVisualizationShade.setShadedViewFacetTolerances(nxopen.preferences.PartVisualizationShade.ShadedViewToleranceType, double, double, double) instead.

setShadedViewFaceTolerance(double) - Method in interface nxopen.preferences.PartVisualizationShade

Deprecated.

Deprecated in NX8.0.0. Use PartVisualizationShade.getShadedViewFacetTolerances(nxopen.preferences.PartVisualizationShade.ShadedViewToleranceType) and PartVisualizationShade.setShadedViewFacetTolerances(nxopen.preferences.PartVisualizationShade.ShadedViewToleranceType, double, double, double) instead.

setShadedViewFacetTolerances(PartVisualizationShade.ShadedViewToleranceType, double, double, double) - Method in interface nxopen.preferences.PartVisualizationShade

Sets the edge, face and angle tolerances to be used with the specified tolerance set for shaded views.

setShadedViewsType(SelPref.ShadedViews) - Method in interface nxopen.display.SelPref

License requirements: None.

setShadedViewTolerance(PartVisualizationShade.ShadedViewToleranceType) - Method in interface nxopen.preferences.PartVisualizationShade

Sets the tolerance for shaded views.

setShadedViewUpdateMode(PartVisualizationShade.ViewUpdateModeType) - Method in interface nxopen.preferences.PartVisualizationShade

Sets the update mode for shaded views.

setShadeGraphicSymbol(boolean) - Method in interface nxopen.cae.CaeDOFSetDisplay

Sets the flag indicating whether or not shading of graphic symbols is required
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setShadeGraphicSymbol(boolean) - Method in interface nxopen.cae.SimBCDisplay

Sets the flag indicating whether or not shading of graphic symbols is required
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setShadeSymbols(boolean) - Method in interface nxopen.cae.MeshControlDisplayOptionsBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setShadeTolerance(ShadingToleranceOption) - Method in interface nxopen.drawings.ViewStyleShadingBuilder

License requirements: drafting ("DRAFTING")
.

setShading(UFPatt.Switch) - Method in interface nxopen.uf.UFPatt

Refer to UF_PATT_set_shading for documentation.

setShadingTolerance(ShadingToleranceOption) - Method in interface nxopen.drawings.ShadingViewStyle

Sets the shading tolerance.

setShadingTolerance(ShadingToleranceOption) - Method in interface nxopen.preferences.ShadingViewPreferences

Sets the shading tolerance.

setShadowCastingDisabled(boolean) - Method in interface nxopen.display.CgfxMattexBuilder

Deprecated.

Deprecated in NX10.0.0. No alternative provided for this class.

setShadows(boolean) - Method in interface nxopen.ModelingViewHighQualityImage

Sets the setting for whether the High Quality Image is to contain shadows
License requirements: None.

setShadowsEnabled(boolean) - Method in interface nxopen.display.Shadows

License requirements: None.

setShadowSoftness(double) - Method in interface nxopen.display.ImageBasedLighting

License requirements: None.

setShadowType(ImageBasedLighting.ShadowsType) - Method in interface nxopen.display.ImageBasedLighting

License requirements: None.

setShankShape(InsertAuxiliaryBuilder.ShankShapeTypes) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder

License requirements: None.

setShape(BoundaryTurnMemberCorner.ShapeType) - Method in interface nxopen.cam.BoundaryTurnMemberCorner

License requirements: cam_base ("CAM BASE")
.

setShape(DirectionOption, IProfile[]) - Method in interface nxopen.die.PadChildBuilder

Sets the shape profile of the die pad.

setShape(GussetBuilder.Shapes) - Method in interface nxopen.features.sheetmetal.GussetBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setShape(WheelFixingBuilder.ShapeType) - Method in interface nxopen.features.vehicledesign.WheelFixingBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setShape(ElectrodeBlankBuilder.BlankShape) - Method in interface nxopen.tooling.ElectrodeBlankBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setShapeControl(double) - Method in interface nxopen.features.OvercrownBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setShapeControl(StyledBlendBuilder.StyledBlendShapeControlType) - Method in interface nxopen.features.StyledBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setShapeControlFirstCurve(double) - Method in interface nxopen.features.CircularBlendCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setShapeControlMethod(BridgeCurveBuilderEx.ShapeControlMethods) - Method in interface nxopen.features.BridgeCurveBuilderEx

License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_1 ("basic freeform modeling")
.

setShapeControlOption(BridgeCurveBuilder.ShapeControlTypes) - Method in interface nxopen.features.BridgeCurveBuilder

Deprecated.

Deprecated in NX8.5.0. Use BridgeCurveBuilderEx instead.

setShapeControlSecondCurve(double) - Method in interface nxopen.features.CircularBlendCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setShapeControlType(FillHoleBuilder.ShapeControlTypes) - Method in interface nxopen.features.FillHoleBuilder

License requirements: nx_freeform_1 ("basic freeform modeling"), solid_modeling ("SOLIDS MODELING")
.

setShapeDetail(Body[]) - Method in interface nxopen.die.FlangeTaskBuilder

Sets the shape detail of the form task for bodies
License requirements: die_engineering ("DIE ENGINEERING")
.

setShapeDetail(Body[]) - Method in interface nxopen.die.FormTaskBuilder

Sets the shape detail of the form task.

setShapeDetailByProfile(DirectionOption, IProfile[]) - Method in interface nxopen.die.FlangeTaskBuilder

Sets the shape detail of the flange task for profiles
License requirements: die_engineering ("DIE ENGINEERING")
.

setShapeDetailByProfile(DirectionOption, IProfile[]) - Method in interface nxopen.die.FormTaskBuilder

Sets the shape detail of the form task using a profile.

setShapeHighlight(boolean) - Method in interface nxopen.mechatronics.PreferencesBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setShapeMatch(int) - Method in interface nxopen.features.ReplaceBlendBuilder

License requirements: None.

setShapeOption(AestheticFaceBlendBuilder.ShapeType) - Method in interface nxopen.features.AestheticFaceBlendBuilder

Deprecated.

Deprecated in NX8.0.0. Use Features.AestheticFaceBlendBuilder#setIsAccelerated instead.

setShapePreserved(boolean) - Method in interface nxopen.features.RuledBuilder

License requirements: features_modeling ("FEATURES MODELING") OR nx_freeform_1 ("basic freeform modeling")
.

setShapeProperties(CollisionSensorBuilder.ShapePropertiesOption) - Method in interface nxopen.mechatronics.CollisionSensorBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setShapeSkewOption(ConicCrossSection.ShapeSkewMethod) - Method in interface nxopen.geometricutilities.ConicCrossSection

License requirements: solid_modeling ("SOLIDS MODELING")
.

setShapeType(LaserProfileMove.ShapeTypes) - Method in interface nxopen.cam.LaserProfileMove

License requirements: cam_base ("CAM BASE")
.

setShapeType(PadChildBuilder.ShapeTypeOption) - Method in interface nxopen.die.PadChildBuilder

Sets the shape type of the die pad.

setShapeType(PadParentBuilder.ShapeTypeOption) - Method in interface nxopen.die.PadParentBuilder

Sets the shape type of die pads.

setShapeType(PierceHoleChildBuilder.ShapeTypeOption) - Method in interface nxopen.die.PierceHoleChildBuilder

Sets the pierce hole shape type
License requirements: ug_die_design ("Die Design")
.

setShapeValue(double) - Method in interface nxopen.die.SpringbackCompensationBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR nx_freeform_2 ("advanced freeform modeling")
.

setSharedSuppressed(boolean) - Method in interface nxopen.positioning.ComponentConstraint

Set the shared suppression state of this ComponentConstraint used across all arrangements where the constraint is not arrangement specific.

setShareGeometriesOption(SessionModeling.ShareGeometriesOnSaveType) - Method in interface nxopen.preferences.SessionModeling

Sets the option " Share Geometry on Save " gives choice of whether to share geometries among Parasolid solid entities on save or not
License requirements: None.

setSharpEdgeLineFont(int) - Method in interface nxopen.preferences.SubdivisionModelingPreferences

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setShearCenter(boolean) - Method in interface nxopen.features.SectionInertiaAnalysisBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setShedModeToggle(boolean) - Method in interface nxopen.display.TrueShadingBuilder

License requirements: None.

setSheet(boolean) - Method in interface nxopen.drawings.ViewStyleDetailBuilder

License requirements: drafting ("DRAFTING")
.

setSheet(boolean) - Method in interface nxopen.drawings.ViewStyleProjectedBuilder

License requirements: drafting ("DRAFTING")
.

setSheet(boolean) - Method in interface nxopen.drawings.ViewStyleSectionConstraintsBuilder

License requirements: drafting ("DRAFTING")
.

setSheetBodies(boolean) - Method in interface nxopen.drawings.ViewStyleSectionBuilder

License requirements: drafting ("DRAFTING")
.

setSheetBodyLayer(int) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSheetCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use TrackDrawingChangesReportFilterBuilder.setReportFilterStatus(nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter, boolean) instead.

setSheetGeometryToSketch(boolean) - Method in interface nxopen.ASCImporter

License requirements: nx_layout ("NX Layout")
.

setSheetMetal(Body) - Method in interface nxopen.die.DrawDiePunchBuilder

Sets the sheet metal of the draw die punch casting.

setSheetMetal(Body) - Method in interface nxopen.die.RotorBuilder

Sets the sheet metal of the rotor casting.

setSheetMetal(Body) - Method in interface nxopen.die.SteelInsertBuilder

Sets the sheet metal of the die steelinsert
License requirements: ug_die_design ("Die Design")
.

setSheetMetalDistance(double) - Method in interface nxopen.die.FlangeSteelRibChildBuilder

Sets the sheet metal distance of the Flange Steel Rib
License requirements: ug_die_design ("Die Design")
.

setSheetMetalDistance(double) - Method in interface nxopen.die.FlangeSteelRibParentBuilder

Sets the sheet metal distance of the Flange Steel Ribs
License requirements: ug_die_design ("Die Design")
.

setSheetMetalPartName(String) - Method in interface nxopen.tooling.BlankGeneratorBuilder

License requirements: None.

setSheetName(EWDraftingBuilder.NameOption) - Method in interface nxopen.tooling.EWDraftingBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setSheetNumber(int) - Method in interface nxopen.cam.WorkInstructionBuilder

License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.

setSheetNumber(int) - Method in interface nxopen.Spreadsheet

Sets the worksheet with specified index as current worksheet
License requirements: None.

setSheets(NXObject[]) - Method in interface nxopen.PlotSourceBuilder

Sets all the sheets in the part file
License requirements: None.

setSheetScale(double) - Method in interface nxopen.features.shipdesign.SectionViewBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setSheetThickness(double) - Method in interface nxopen.die.TrimLineDevelopmentBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setSheetTitle(String) - Method in interface nxopen.cam.WorkInstructionBuilder

License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.

setSheetToDeform(ScCollector) - Method in interface nxopen.features.GlobalShapingBuilder

License requirements: None.

setShelfEnd(boolean) - Method in interface nxopen.features.ShelfBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setShelfPoint1(Point) - Method in interface nxopen.features.PatchOpeningsBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING")
.

setShelfPoint2(Point) - Method in interface nxopen.features.PatchOpeningsBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING")
.

setShelfType(ShelfBuilder.Types) - Method in interface nxopen.features.ShelfBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setShellDataLocation(NodalFunctionEvalShellLocation) - Method in interface nxopen.cae.responsesimulation.NodalFunctionEvaluationSettingBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setShellElementFace(StrainGageShellElementFaceType) - Method in interface nxopen.cae.responsesimulation.StrainGageBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setShellEvaluationLocation(ShellElementEvaluationLocation) - Method in interface nxopen.cae.responsesimulation.ElementalFunctionEvaluationSettingBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setShellLayer(TBSLoadCase.LayerOption) - Method in interface nxopen.cae.optimization.TBSLoadCase

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setShellLocation(DataLocation.Shell) - Method in interface nxopen.cae.responsesimulation.DataLocation

License requirements: nx_response_anlys ("NX Response Analysis")
.

setShellOptions(PartVisualizationEmphasis.ShellOptions) - Method in interface nxopen.preferences.PartVisualizationEmphasis

Modifies options that control the appearance of de-emphasized shaded geometry when the See-Thru style is set to Shell.

setShellRegion(DurabilityStressAxesBuilder.ShellRegionEnum) - Method in interface nxopen.cae.DurabilityStressAxesBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setShellResultantFx(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setShellResultantFxy(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setShellResultantFy(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setShellResultantMx(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setShellResultantMxy(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setShellResultantMy(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setShellResultantQx(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setShellResultantQy(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setShellSect(Result.Section) - Method in interface nxopen.cae.ResultVariable

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setShellSection(Result.Section) - Method in interface nxopen.cae.ResultMeasureResultAllOptions

Set the shell section for shell stress/strain results
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setShellSection(Result.Section) - Method in interface nxopen.cae.ResultMeasureResultDirectionSectionOptions

Set the shell section for shell stress/strain results
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setShellSection(Result.Section) - Method in interface nxopen.cae.ResultMeasureResultSectionOptions

Set the shell section for shell stress/strain results
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setShellStress(boolean) - Method in interface nxopen.cae.LaminateQuickReportBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setShellStressRule(LaminateQuickReportBuilder.EnvelopeRule) - Method in interface nxopen.cae.LaminateQuickReportBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setShellThickness(String, int, Tag[]) - Method in interface nxopen.uf.UFSf

Refer to UF_SF_set_shell_thickness for documentation.

setShift(double) - Method in interface nxopen.cam.Cycle

License requirements: cam_base ("CAM BASE")
.

setShiftStatus(boolean) - Method in interface nxopen.cam.Cycle

License requirements: cam_base ("CAM BASE")
.

setShininess(double) - Method in interface nxopen.drawings.ShadingViewStyle

Sets the shininess tolerance.

setShininess(double) - Method in interface nxopen.preferences.ShadingViewPreferences

Sets the shininess tolerance.

setShininessData(double) - Method in interface nxopen.preferences.ViewVisualizationVisual

Sets the shininess value.

setShininessScale(double) - Method in interface nxopen.drawings.ViewStyleShadingBuilder

License requirements: drafting ("DRAFTING")
.

setShipDrawingObject(String, boolean) - Method in interface nxopen.drawings.ShipDraftingViewLinesViewStyle

Note: The initial values are set based on the file NX_ShipAttribute.xml The status determines the line settings for the ship feature in a view.

setShipDrawingObject(String, boolean) - Method in interface nxopen.preferences.ShipDraftingViewLinesViewPreferences

Note: The initial values are set based on the file NX_ShipAttribute.xml The status determines the line settings for the ship feature in a view.

setShipLibType(UpdateShipLibraryBuilder.ShipLibOptionType) - Method in interface nxopen.features.shipdesign.UpdateShipLibraryBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setShipNo(int) - Method in interface nxopen.features.shipdesign.QualifySketchBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setShipObjectType(ShipnamesBuilderType) - Method in interface nxopen.features.shipdesign.ShipNamesBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setShipStructureType(ShipDesignPreferencesBuilder.Types) - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setShipType(DDAMExcitation.ShipType) - Method in interface nxopen.cae.responsesimulation.RSEventAttributes

License requirements: nx_response_anlys ("NX Response Analysis")
.

setSHMName(String) - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setSHMSignalAccess(SHMSignalConnectionBuilder.SHMSignalAccessType) - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setSHMSignalName(String) - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setSHMSignalType(SHMSignalConnectionBuilder.DataType) - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setShockDriverJointSteps(int) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setShortDescription(String) - Method in interface nxopen.routing.DesignRuleViolation

Sets the short description of the design rule violation is returned
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setShouldCopySketchBase(boolean) - Method in interface nxopen.linedesigner.ColumnFeatureBuilder

Sets
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setShouldCopySketchColumn(boolean) - Method in interface nxopen.linedesigner.ColumnFeatureBuilder

Sets
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setShow(boolean) - Method in interface nxopen.blockstyler.UIBlock

License requirements: None.

setShow(boolean) - Method in interface nxopen.display.GridBuilder

License requirements: None.

setShow(boolean) - Method in interface nxopen.display.SectionCurveSettingsBuilder

License requirements: None.

setShow3dMaterialRemoval(boolean) - Method in interface nxopen.sim.IsvControlPanelBuilder

Sets the show 3d material removal
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setShowAddButton(boolean) - Method in interface nxopen.blockstyler.ListBox

License requirements: None.

setShowAddNewSet(boolean) - Method in interface nxopen.blockstyler.SetList

License requirements: None.

setShowAdjacentBlends(boolean) - Method in interface nxopen.drawings.CustomViewSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setShowAllDatumAxes(boolean) - Method in interface nxopen.SketchAlongPathBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setShowAngleLeadingZeros(boolean) - Method in interface nxopen.drawings.GeneralViewStyle

Sets the status of leading zeros display in view angle.

setShowAngleLeadingZeros(boolean) - Method in interface nxopen.preferences.GeneralViewPreferences

Sets the status of leading zeros display in view angle.

setShowAngleTrailingZeros(boolean) - Method in interface nxopen.drawings.GeneralViewStyle

Sets the status of trailing zeros display in view angle.

setShowAngleTrailingZeros(boolean) - Method in interface nxopen.preferences.GeneralViewPreferences

Sets the status of trailing zeros display in view angle.

setShowAnnotations(boolean) - Method in interface nxopen.layout2d.ComponentSettingsBuilder

License requirements: nx_layout ("NX Layout")
.

setShowAxis(boolean) - Method in interface nxopen.fields.DisplayPropertiesBuilder

License requirements: None.

setShowAxisSubBlock(boolean) - Method in interface nxopen.blockstyler.OrientXpress

License requirements: None.

setShowBackground(boolean) - Method in interface nxopen.cae.xyplot.BaseGridLayoutStyleSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setShowBlindVolume(boolean) - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setShowBoundbox(boolean) - Method in interface nxopen.tooling.WorkpieceBuilder

License requirements: None.

setShowBreakLines(boolean) - Method in interface nxopen.drawings.ViewBreakBuilder

License requirements: drafting ("DRAFTING")
.

setShowCap(boolean) - Method in interface nxopen.display.DynamicSectionBuilder

License requirements: None.

setShowCenterLines(boolean) - Method in interface nxopen.drawings.CustomViewSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setShowCenterPoint(boolean) - Method in interface nxopen.annotations.CenterMarkSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setShowCheckBoundaryStatus(boolean) - Method in interface nxopen.drawings.CustomViewSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setShowClearance(boolean) - Method in interface nxopen.features.vehicledesign.DynamicCurbBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setShowClip(boolean) - Method in interface nxopen.display.DynamicSectionBuilder

License requirements: None.

setShowClippedGhost(boolean) - Method in interface nxopen.cae.ClippingParameters

Set show clipped ghost
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setShowColumnHeadings(boolean) - Method in interface nxopen.blockstyler.SetList

License requirements: None.

setShowColumns(HoleTableSettingsFormatBuilder.ShowColumnsType) - Method in interface nxopen.annotations.HoleTableSettingsFormatBuilder

License requirements: drafting ("DRAFTING")
.

setShowComb(boolean) - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord

Deprecated.

Deprecated in NX8.5.0. Use CurveAnalysisDisplay .

setShowCombs(boolean) - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder

License requirements: None.

setShowCracks(boolean) - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setShowCrosshairsToggle(boolean) - Method in interface nxopen.display.SelPref

License requirements: None.

setShowCurves(boolean) - Method in interface nxopen.display.DynamicSectionBuilder

Deprecated.

Deprecated in NX6.0.0. Use ModelingView.setDynamicSectionVisible(nxopen.display.DynamicSection, boolean) instead.

setShowCutting(boolean) - Method in interface nxopen.cam.PathDisplay

License requirements: None.

setShowDeleteButton(boolean) - Method in interface nxopen.blockstyler.ListBox

License requirements: None.

setShowDemoCylinder(boolean) - Method in interface nxopen.features.vehicledesign.CloseRangeDemoCylinderListItemBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setShowDemoCylinderRay(boolean) - Method in interface nxopen.features.vehicledesign.CloseRangeDemoCylinderListItemBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setShowDimension(boolean) - Method in interface nxopen.features.ToolingBoxBuilder

License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard") OR studio_free_form ("STUDIO FREE FORM") OR features_modeling ("FEATURES MODELING") OR solid_modeling ("SOLIDS MODELING")
.

setShowDimensions(boolean) - Method in interface nxopen.layout2d.ComponentSettingsBuilder

License requirements: nx_layout ("NX Layout")
.

setShowDistanceMeasurement(boolean) - Method in interface nxopen.features.vehicledesign.GroundClearanceBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setShowDistanceMeasurement(boolean) - Method in interface nxopen.features.vehicledesign.InnerAngleBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setShowDistanceMeasurement(boolean) - Method in interface nxopen.features.vehicledesign.OilPanBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setShowDistanceMeasurement(boolean) - Method in interface nxopen.features.vehicledesign.SlopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setShowDistanceMeasurement(boolean) - Method in interface nxopen.features.vehicledesign.StaticCurbBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setShowEdgesHiddenByEdges(boolean) - Method in interface nxopen.drawings.CustomViewSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setShowEndpoints(boolean) - Method in interface nxopen.cam.PathDisplay

License requirements: None.

setShowEndPoints(Curve, boolean) - Method in interface nxopen.geometricanalysis.CurveAnalysisDisplay

Sets a flag representing end points display state of a curve
License requirements: solid_modeling ("SOLIDS MODELING")
.

setShowExcludes(boolean) - Method in interface nxopen.cae.BCSelectionDisplayBuilder

License requirements: None.

setShowExpandCollapseMarker(boolean) - Method in interface nxopen.blockstyler.Tree

License requirements: None.

setShowExtendedEyes(boolean) - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setShowEyeLabels(boolean) - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setShowEyePoints(boolean) - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setShowFacetEdge(boolean) - Method in interface nxopen.geometricanalysis.ReflectionAnalysisBuilder

License requirements: None.

setShowFacetEdges(boolean) - Method in interface nxopen.display.FacetSettingsBuilder

License requirements: None.

setShowFacetEdges(boolean) - Method in interface nxopen.drawings.ViewWorkflowBuilder

License requirements: drafting ("DRAFTING")
.

setShowFacetEdges(boolean) - Method in interface nxopen.preferences.PartDrafting

Sets the flag indicating whether to display facet edges in shaded member views.

setShowFacetEdges(boolean) - Method in interface nxopen.preferences.SessionVisualizationShade

Sets the show facet edge flag.

setShowFaceWithoutColorAttributeToggle(boolean) - Method in interface nxopen.tooling.FaceColorManagementBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setShowFaceWithSameColorAttributeToggle(boolean) - Method in interface nxopen.tooling.FaceColorManagementBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setShowFailedElementsLabel(boolean) - Method in interface nxopen.cae.modelcheck.ElementQualityCheckBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setShowFlag(boolean) - Method in interface nxopen.cae.ShowHideBuilder

License requirements: None.

setShowFlag(Curve, CurveAnalysisDisplay.ShowFlagType, boolean) - Method in interface nxopen.geometricanalysis.CurveAnalysisDisplay

Deprecated.

Deprecated in NX8.5.0. Use CurveCurvatureAnalysis .

setShowFlag(DisplayableObject, SurfaceAnalysisDisplay.ShowFlagType, boolean) - Method in interface nxopen.geometricanalysis.SurfaceAnalysisDisplay

Sets show flags
License requirements: solid_modeling ("SOLIDS MODELING")
.

setShowFlowDirectionAndOriginCurve(boolean) - Method in interface nxopen.blockstyler.SectionBuilder

License requirements: None.

setShowFlowDirectionAndOriginCurve(boolean) - Method in interface nxopen.blockstyler.SuperPoint

License requirements: None.

setShowFlowDirectionAndOriginCurve(boolean) - Method in interface nxopen.blockstyler.SuperSection

License requirements: None.

setShowFocusHandle(boolean) - Method in interface nxopen.blockstyler.AngularDimension

License requirements: None.

setShowFocusHandle(boolean) - Method in interface nxopen.blockstyler.LinearDimension

License requirements: None.

setShowFocusHandle(boolean) - Method in interface nxopen.blockstyler.OnPathDimension

License requirements: None.

setShowFocusHandle(boolean) - Method in interface nxopen.blockstyler.RadiusDimension

License requirements: None.

setShowGraph(boolean) - Method in interface nxopen.optimization.DesignStudyBuilder

License requirements: None.

setShowGraph(boolean) - Method in interface nxopen.optimization.OptimizationBuilder

License requirements: None.

setShowGrid(boolean) - Method in interface nxopen.display.DynamicSectionBuilder

License requirements: None.

setShowGrid(boolean) - Method in interface nxopen.preferences.WorkPlane

Sets the show and hide grid flag.

setShowHandle(boolean) - Method in interface nxopen.blockstyler.AngularDimension

License requirements: None.

setShowHandle(boolean) - Method in interface nxopen.blockstyler.LinearDimension

License requirements: None.

setShowHandle(boolean) - Method in interface nxopen.blockstyler.RadiusDimension

License requirements: None.

setShowHandleHints(boolean) - Method in interface nxopen.preferences.VisualizationHandles

Sets the show handle hints flag.

setShowHeader(boolean) - Method in interface nxopen.blockstyler.Tree

License requirements: None.

setShowHiddenLines(boolean) - Method in interface nxopen.drawings.CustomViewSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setShowInadequateStretch(boolean) - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setShowInflection(boolean) - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord

Deprecated.

Deprecated in NX8.5.0. Use CurveAnalysisDisplay .

setShowInflectionPoints(boolean) - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setShowInflectionPointsEnabled(boolean) - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setShowInflections(boolean) - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder

License requirements: None.

setShowInfo(boolean) - Method in interface nxopen.facet.CleanupFacetBodyBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setShowInformationWindow(boolean) - Method in interface nxopen.facet.STLImportBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setShowInfoWindow(boolean) - Method in interface nxopen.tooling.StandardPartBuilder

License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setShowInGraphicView(boolean) - Method in interface nxopen.features.ConstructionFeatureData

License requirements: solid_modeling ("SOLIDS MODELING")
.

setShowInGraphicView(boolean) - Method in interface nxopen.features.OutputFeatureData

License requirements: solid_modeling ("SOLIDS MODELING")
.

setShowInterference(boolean) - Method in interface nxopen.display.DynamicSectionBuilder

License requirements: None.

setShowInteriorFeatureCurves(boolean) - Method in interface nxopen.features.sheetmetal.FlatPatternBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setShowIsoclineNegative(boolean) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setShowIsoclinePositive(boolean) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setShowKnot(Curve, boolean) - Method in interface nxopen.geometricanalysis.CurveAnalysisDisplay

Sets a flag representing knots display state of a b-spline curve
License requirements: solid_modeling ("SOLIDS MODELING")
.

setShowKnot(boolean) - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord

Deprecated.

Deprecated in NX8.5.0. Use CurveAnalysisDisplay .

setShowLabel(boolean) - Method in interface nxopen.blockstyler.LineColorFontWidth

License requirements: None.

setShowLabel(BoundedGridBuilder.ShowLabelType) - Method in interface nxopen.display.BoundedGridBuilder

License requirements: None.

setShowLabels(boolean) - Method in interface nxopen.fields.DisplayPropertiesBuilder

License requirements: None.

setShowLabels(boolean) - Method in interface nxopen.preferences.WorkPlane

Sets the show and hide grid labels flag.

setShowLabelWithLeader(boolean) - Method in interface nxopen.annotations.HoleTableSettingsLabelBuilder

License requirements: drafting ("DRAFTING")
.

setShowLeadersToggle(boolean) - Method in interface nxopen.formboard.PathLengthAnnotationBuilder

License requirements: routing_harness ("Routing Harness")
.

setShowLengthEnabled(boolean) - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setShowLockedDeletedContent(TabularNoteStyleBuilder.ShowLockedDeletedRowMethod) - Method in interface nxopen.annotations.TabularNoteStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setShowLockedDeletedRows(PartsListBuilder.PartsListShowLockedDeletedRows) - Method in interface nxopen.annotations.PartsListBuilder

License requirements: None.

setShowMaintainLayerOption(boolean) - Method in interface nxopen.blockstyler.LayerBlock

License requirements: None.

setShowMajorLines(boolean) - Method in interface nxopen.display.GridBuilder

License requirements: None.

setShowMapTopo(boolean) - Method in interface nxopen.fields.DisplayPropertiesBuilder

License requirements: None.

setShowMaxLabels(boolean) - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder

License requirements: None.

setShowMigratedBody(boolean) - Method in interface nxopen.features.shipdesign.PillarBuilder

Sets the show migrated body flag.

setShowMigratedBody(boolean) - Method in interface nxopen.features.shipdesign.PlateBuilder

Sets the show migrated body flag.

setShowMigratedBody(boolean) - Method in interface nxopen.features.shipdesign.StiffenerBuilder

Sets the show migrated body flag.

setShowMinLabels(boolean) - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder

License requirements: None.

setShowModelViewBorders(boolean) - Method in interface nxopen.preferences.PartVisualizationNamesBorders

Sets the show model view border flag. allows to turn on and off the display of view borders.

setShowModelViewNames(boolean) - Method in interface nxopen.preferences.PartVisualizationNamesBorders

Sets the show model view names flag.

setShowMoveUpDownButtons(boolean) - Method in interface nxopen.blockstyler.ListBox

License requirements: None.

setShowMultipleColumns(boolean) - Method in interface nxopen.blockstyler.Tree

License requirements: None.

setShowNeedle(boolean) - Method in interface nxopen.geometricanalysis.CurveContinuityBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setShowNeedles(boolean) - Method in interface nxopen.geometricutilities.CombOptionsBuilder

License requirements: None.

setShowNodeLabels(boolean) - Method in interface nxopen.cae.ProjectNodesToCadGeometryBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setShowNodeLocations(boolean) - Method in interface nxopen.cae.ProjectNodesToCadGeometryBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setShowNoncutting(boolean) - Method in interface nxopen.cam.PathDisplay

License requirements: None.

setShowOnlyPartModule(boolean) - Method in interface nxopen.features.PartModuleBuilder

Deprecated.

Deprecated in NX9.0.0. Please use PartModule.showOnly() instead.

setShowOnTop(boolean) - Method in interface nxopen.display.GridBuilder

License requirements: None.

setShowOptionLabels(boolean) - Method in interface nxopen.blockstyler.LineFont

License requirements: None.

setShowOrderedAbscissa(boolean) - Method in interface nxopen.cae.xyplot.GeneralDisplayStyles2D

License requirements: nx_ftk ("NX Advanced Graphing")
.

setShowOrderGrid(boolean) - Method in interface nxopen.cae.xyplot.GridStyle2DColorContour

License requirements: nx_ftk ("NX Advanced Graphing")
.

setShowOriginalLayerOption(boolean) - Method in interface nxopen.blockstyler.LayerBlock

License requirements: None.

setShowOutline(boolean) - Method in interface nxopen.cae.ClippingParameters

Set show outline
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setShowOutline(boolean) - Method in interface nxopen.cae.xyplot.BaseBarStyleSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setShowOutline(boolean) - Method in interface nxopen.cae.xyplot.BasePlateStyleSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setShowOutline(boolean) - Method in interface nxopen.cae.xyplot.SurfaceStyleSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setShowOutOfTolerance(boolean) - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder

License requirements: gateway ("UG GATEWAY")
.

setShowOutRangeLabels(boolean) - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setShowPartAndClearanceHoleOnly(boolean) - Method in interface nxopen.tooling.ClearanceManagementBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setShowPartingLine(boolean) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setShowPath(boolean) - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setShowPathPoints(boolean) - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setShowPeak(boolean) - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord

Deprecated.

Deprecated in NX8.5.0. Use CurveAnalysisDisplay .

setShowPeakPoints(boolean) - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setShowPeakPointsEnabled(boolean) - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setShowPeaks(boolean) - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder

License requirements: None.

setShowPendulum(boolean) - Method in interface nxopen.features.vehicledesign.PendulumPlacementBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setShowPictures(boolean) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setShowPipe(boolean) - Method in interface nxopen.features.SilhouetteFlangeBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setShowPlaneSubBlock(boolean) - Method in interface nxopen.blockstyler.OrientXpress

License requirements: None.

setShowPlot(boolean) - Method in interface nxopen.cae.responsesimulation.FunctionEvaluationOutputSettings

License requirements: nx_response_anlys ("NX Response Analysis")
.

setShowPoint(boolean) - Method in interface nxopen.features.vehicledesign.PendulumPlacementBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setShowPoints(boolean) - Method in interface nxopen.features.vehicledesign.WindshieldDatumBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setShowPole(Curve, boolean) - Method in interface nxopen.geometricanalysis.CurveAnalysisDisplay

Sets a flag representing poles display state of a b-spline curve
License requirements: solid_modeling ("SOLIDS MODELING")
.

setShowPole(boolean) - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord

Deprecated.

Deprecated in NX8.5.0. Use CurveAnalysisDisplay .

setShowRays(boolean) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setShowRays(boolean) - Method in interface nxopen.features.vehicledesign.WindshieldDatumBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setShowReferenceCalloutSuffix(boolean) - Method in interface nxopen.annotations.PartsListBuilder

License requirements: None.

setShowReferenceGeometry(boolean) - Method in interface nxopen.layout2d.ComponentSettingsBuilder

License requirements: nx_layout ("NX Layout")
.

setShowReferenceSubBlock(boolean) - Method in interface nxopen.blockstyler.OrientXpress

License requirements: None.

setShowRemove(boolean) - Method in interface nxopen.blockstyler.SetList

License requirements: None.

setShowReorderControls(boolean) - Method in interface nxopen.blockstyler.SetList

License requirements: None.

setShowReport(boolean) - Method in interface nxopen.HumanPosturePredictionBuilder

License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setShowReportReference(boolean) - Method in interface nxopen.uf.UFModeling

Refer to UF_MODL_set_show_report_reference for documentation.

setShowRetainedAnnotations(boolean) - Method in interface nxopen.annotations.RetainedAnnotationsBuilder

License requirements: drafting ("DRAFTING")
.

setShowRiskOfCracks(boolean) - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setShowScaleValue(boolean) - Method in interface nxopen.blockstyler.DoubleBlock

License requirements: None.

setShowScaleValue(boolean) - Method in interface nxopen.blockstyler.IntegerBlock

License requirements: None.

setShowSceneControl(boolean) - Method in interface nxopen.blockstyler.OrientXpress

License requirements: None.

setShowSectionLength(boolean) - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setShowSectionLine(ViewSectionLineBuilder.ShowSectionLineType) - Method in interface nxopen.drawings.ViewSectionLineBuilder

License requirements: drafting ("DRAFTING")
.

setShowSelection(boolean) - Method in interface nxopen.blockstyler.SelectElement

Deprecated.

Deprecated in NX11.0.0.

setShowSelection(boolean) - Method in interface nxopen.blockstyler.SelectNode

Deprecated.

Deprecated in NX11.0.0.

setShowSelfHiddenLines(boolean) - Method in interface nxopen.drawings.CustomViewSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setShowSetting(boolean) - Method in interface nxopen.tooling.PocketBuilder

License requirements: None.

setShowSevereThinning(boolean) - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setShowShortcuts(boolean) - Method in interface nxopen.blockstyler.SpecifyCSYS

License requirements: None.

setShowShortcuts(boolean) - Method in interface nxopen.blockstyler.SpecifyPlane

License requirements: None.

setShowShortcuts(boolean) - Method in interface nxopen.blockstyler.SpecifyPoint

License requirements: None.

setShowShortcuts(boolean) - Method in interface nxopen.blockstyler.SpecifyVector

License requirements: None.

setShowSightRays(boolean) - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setShowSimuationUiInModeling(boolean) - Method in interface nxopen.preferences.SessionModeling

License requirements: None.

setShowSkeleton(boolean) - Method in interface nxopen.features.HumanBuilder

Set flag for show human skeleton
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setShowSmoothEdgeEndGapsLock(boolean) - Method in interface nxopen.drawings.CustomViewSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setShowSmoothEdgeEndGapsValue(double) - Method in interface nxopen.drawings.CustomViewSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setShowSmoothEdges(boolean) - Method in interface nxopen.drawings.CustomViewSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setShowSmoothEdges(boolean) - Method in interface nxopen.drawings.ViewStyleSecondaryComponentsBuilder

License requirements: drafting ("DRAFTING")
.

setShowSolids(boolean) - Method in interface nxopen.weld.PointMarkBuilder

License requirements: ugweld ("UG WELD")
.

setShowSplineMinimumRadius(boolean) - Method in interface nxopen.routing.SplinePathBuilder

License requirements: routing_base ("Routing Basic")
.

setShowSubsetStructure(boolean) - Method in interface nxopen.assemblies.Subset

License requirements: nx_4gd_integration ("4th Generation Design")
.

setShowSurface(boolean) - Method in interface nxopen.features.vehicledesign.BaseDataBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setShowSurface(boolean) - Method in interface nxopen.features.vehicledesign.BaseDataWheelBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setShowSurfaceAngles(boolean) - Method in interface nxopen.features.shipdesign.OrientationDefinitionBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setShowTaskNavigator(boolean) - Method in interface nxopen.blockstyler.Wizard

License requirements: None.

setShowThroughAssemblyState(boolean) - Method in interface nxopen.weld.WeldPointBuilder

Sets the through assy coordinate system state
License requirements: ugweld ("UG WELD")
.

setShowThroughDisplay(boolean) - Method in interface nxopen.cae.MeshControlDisplayOptionsBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setShowThroughWorkPartState(boolean) - Method in interface nxopen.weld.WeldPointBuilder

Sets the through work coordinate system state
License requirements: ugweld ("UG WELD")
.

setShowThruState(boolean) - Method in interface nxopen.weld.JointmarkBuilder

Indicates whether the output objects should show thru on creation
License requirements: ugweld ("UG WELD")
.

setShowToolCenter(boolean) - Method in interface nxopen.cam.PathDisplay

License requirements: None.

setShowToolPath(boolean) - Method in interface nxopen.sim.IsvControlPanelBuilder

Sets the show tool path
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setShowToolTips(boolean) - Method in interface nxopen.blockstyler.Tree

License requirements: None.

setShowTorsoLine(boolean) - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setShowTraceLines(boolean) - Method in interface nxopen.drawings.CustomViewSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setShowTransformVectors(boolean) - Method in interface nxopen.features.FreeTransformerBuilder

License requirements: None.

setShowTransformVectors(boolean) - Method in interface nxopen.features.MeshTransformerBuilder

License requirements: None.

setShowTwistRate(boolean) - Method in interface nxopen.features.shipdesign.OrientationDefinitionBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setShowTypeEnum(ObjectAttributeManagementBuilder.ShowComponentsType) - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setShowUndefinedValues(DisplayPropertiesBuilder.ValuesEnum) - Method in interface nxopen.fields.DisplayPropertiesBuilder

License requirements: None.

setShowUserDefinedLayerOption(boolean) - Method in interface nxopen.blockstyler.LayerBlock

License requirements: None.

setShowUVGrids(boolean) - Method in interface nxopen.drawings.CustomViewSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setShowVIEndGapsLock(boolean) - Method in interface nxopen.drawings.CustomViewSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setShowVIEndGapsValue(double) - Method in interface nxopen.drawings.CustomViewSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setShowViewer(boolean) - Method in interface nxopen.display.DynamicSectionBuilder

License requirements: None.

setShowViewLabel(boolean) - Method in interface nxopen.drawings.ViewDetailLabelBuilder

License requirements: drafting ("DRAFTING")
.

setShowViewLabel(boolean) - Method in interface nxopen.drawings.ViewLabelBuilder

License requirements: drafting ("DRAFTING")
.

setShowViewLabel(boolean) - Method in interface nxopen.drawings.ViewSectionLabelBuilder

License requirements: drafting ("DRAFTING")
.

setShowViewScale(boolean) - Method in interface nxopen.drawings.ViewDetailLabelBuilder

License requirements: drafting ("DRAFTING")
.

setShowViewScale(boolean) - Method in interface nxopen.drawings.ViewLabelBuilder

License requirements: drafting ("DRAFTING")
.

setShowViewScale(boolean) - Method in interface nxopen.drawings.ViewSectionLabelBuilder

License requirements: drafting ("DRAFTING")
.

setShowVirtualIntersections(boolean) - Method in interface nxopen.drawings.CustomViewSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setShowVirtualIntersections(boolean) - Method in interface nxopen.drawings.ViewStyleSecondaryComponentsBuilder

License requirements: drafting ("DRAFTING")
.

setShowVisionCone(MirrorCertificationBuilder.ShowVisionConeType) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setShowWebAngles(boolean) - Method in interface nxopen.features.shipdesign.OrientationDefinitionBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setShowWidths(boolean) - Method in interface nxopen.preferences.PartVisualizationColorSetting

Sets the show widths flag.

setShowWidths(boolean) - Method in interface nxopen.preferences.PartVisualizationLine

Sets the show widths option.

setShowWireframe(boolean) - Method in interface nxopen.features.vehicledesign.BaseDataBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setShowWireframe(boolean) - Method in interface nxopen.features.vehicledesign.BaseDataWheelBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setShowWorkCsys(boolean) - Method in interface nxopen.weld.JointmarkBuilder

License requirements: ugweld ("UG WELD")
.

setShowWorkLayerOption(boolean) - Method in interface nxopen.blockstyler.LayerBlock

License requirements: None.

setShowWrinkles(boolean) - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setShowWrinklingTendency(boolean) - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setShowXAxis(boolean) - Method in interface nxopen.blockstyler.OrientXpress

License requirements: None.

setShowXmlReport(boolean) - Method in interface nxopen.features.shipdesign.CopyObjectsBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setShowXmlReport(boolean) - Method in interface nxopen.features.shipdesign.CopyPasteNewBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setShowXYPlane(boolean) - Method in interface nxopen.blockstyler.OrientXpress

License requirements: None.

setShowXZPlane(boolean) - Method in interface nxopen.blockstyler.OrientXpress

License requirements: None.

setShowYAxis(boolean) - Method in interface nxopen.blockstyler.OrientXpress

License requirements: None.

setShowYZPlane(boolean) - Method in interface nxopen.blockstyler.OrientXpress

License requirements: None.

setShowZAxis(boolean) - Method in interface nxopen.blockstyler.OrientXpress

License requirements: None.

setShowZeroContour(boolean) - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setShrinkage(String) - Method in interface nxopen.tooling.InitProjectBuilder

License requirements: None.

setShroudColor(NXColor) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setSibling(CAMObject) - Method in interface nxopen.cam.InspectionMoveBuilder

Set sibling
License requirements: None.

setSibling(CAMObject) - Method in interface nxopen.cam.MoveBuilder

Set sibling
License requirements: None.

setSide(Post.ClipSide) - Method in interface nxopen.cae.ClippingParameters

Set side
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setSide(CutSides.SideType) - Method in interface nxopen.cam.CutSides

License requirements: cam_base ("CAM BASE")
.

setSide(PendulumPlacementBuilder.SideType) - Method in interface nxopen.features.vehicledesign.PendulumPlacementBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSide(JointExitBuilder.BodySide) - Method in interface nxopen.weld.JointExitBuilder

License requirements: structure_weld ("STRUCTURE WELD")
.

setSide1NormalVectorI(double) - Method in interface nxopen.cam.InspectionParplnFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSide1NormalVectorJ(double) - Method in interface nxopen.cam.InspectionParplnFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSide1NormalVectorK(double) - Method in interface nxopen.cam.InspectionParplnFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSide1PointX(double) - Method in interface nxopen.cam.InspectionParplnFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSide1PointY(double) - Method in interface nxopen.cam.InspectionParplnFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSide1PointZ(double) - Method in interface nxopen.cam.InspectionParplnFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSide2NormalVectorI(double) - Method in interface nxopen.cam.InspectionParplnFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSide2NormalVectorJ(double) - Method in interface nxopen.cam.InspectionParplnFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSide2NormalVectorK(double) - Method in interface nxopen.cam.InspectionParplnFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSide2PointX(double) - Method in interface nxopen.cam.InspectionParplnFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSide2PointY(double) - Method in interface nxopen.cam.InspectionParplnFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSide2PointZ(double) - Method in interface nxopen.cam.InspectionParplnFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSideAngle(String) - Method in interface nxopen.features.sheetmetal.DrawnCutoutBuilder

Deprecated.

Deprecated in NX10.0.0. Use Expression.setRightHandSide(java.lang.String) on the Expression object returned from DrawnCutoutBuilder.sideAngle() instead.

setSideCrossPosition(CrashBarrierBuilder.CrossPositionType) - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSideCut(NXColor) - Method in interface nxopen.cam.PathDisplayColors

License requirements: cam_base ("CAM BASE")
.

setSideEdgeShapeOption(ExtendSheetBuilder.SideEdgeShape) - Method in interface nxopen.features.ExtendSheetBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSideFromCenterlineEnum(PlatformEquipmentBuilder.SideFromCenterlineTypeAPI) - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setSideLoading(String) - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSideOverlapSide(CrashBarrierBuilder.SideOverlapSideType) - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSidePlanarFaces(NXObject, int) - Method in interface nxopen.tooling.FastenerAssy

Sets the side planar faces for the hole in the fastener assembly
License requirements: None.

setSidePosition(CrashBarrierBuilder.SidePositionType) - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSidePositionObject(CrashBarrierBuilder.PositionObjectType) - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSideRailFeature(HeadImpactSideRail) - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSideSeamDisplay(boolean) - Method in interface nxopen.annotations.LineWeldData

Sets the flag indicating whether the side seam is displayed
License requirements: None.

setSideSeamHorizontalFlip(boolean) - Method in interface nxopen.annotations.LineWeldData

Sets the flag indicating whether the side seam is flipped in the horizontal direction
License requirements: None.

setSideSeamObjects(DisplayableObject[]) - Method in interface nxopen.annotations.LineWeldData

Sets the side seam objects.

setSideSeamVerticalFlip(boolean) - Method in interface nxopen.annotations.LineWeldData

Sets the flag indicating whether the side seam is flipped in the vertical direction
License requirements: None.

setSideSeamView(DraftingView) - Method in interface nxopen.annotations.LineWeldData

Sets the view for which side seam is to be created.

setSideShape(CrashBarrierBuilder.ShapeType) - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSideStepMethod(MultiplePassesBuilder.StepMethodTypes) - Method in interface nxopen.cam.MultiplePassesBuilder

License requirements: cam_base ("CAM BASE")
.

setSideUserDefineLength(boolean) - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSidewall(EmbossSidewall) - Method in interface nxopen.features.EmbossRegion

Sets the emboss sidewall object
License requirements: solid_modeling ("SOLIDS MODELING")
.

setSidewallOption(EmbossSidewall.SidewallMethod) - Method in interface nxopen.features.EmbossSidewall

Sets the method to create sidewall
License requirements: solid_modeling ("SOLIDS MODELING")
.

setSidewallType(DimpleBuilder.SidewallTypeOptions) - Method in interface nxopen.features.sheetmetal.DimpleBuilder

Sets the side where the material must be added to the dimple.

setSidewallType(DrawnCutoutBuilder.SidewallTypeOptions) - Method in interface nxopen.features.sheetmetal.DrawnCutoutBuilder

Sets the side where the material must be added to the Drawn Cutout.

setSideWeb(BlankLayoutBuilder.SideWebOption) - Method in interface nxopen.tooling.BlankLayoutBuilder

License requirements: None.

setSignal(double) - Method in interface nxopen.motion.SignalChartListItem

Deprecated.

Deprecated in NX8.5.0. Obtain the expression using Motion.SignalChartListItem#signalExpression to query or edit it.

setSignalChart(SignalChart) - Method in interface nxopen.motion.DriverOperation

License requirements: mechanisms ("MECHANISMS")
.

setSignalChartType(SignalChartBuilder.Type) - Method in interface nxopen.motion.SignalChartBuilder

Sets the SignalChart type
License requirements: nx_motion_motor ("NX Motion Motor")
.

setSignalData(SignalAdapterBuilder.SignalData[]) - Method in interface nxopen.mechatronics.SignalAdapterBuilder

Sets all signal data.

setSignalData(SignalBuilder.Signal) - Method in interface nxopen.mechatronics.SignalBuilder

Sets signal data.

setSignalDataType(ExternalConnectionElementBuilder.DataType) - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setSignalIdentify(NXObject) - Method in interface nxopen.mechatronics.MATLABSignalConnectionBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setSignalName(String) - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setSignalObject(NXObject) - Method in interface nxopen.mechatronics.GanttOperationConditionBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setSignalObject(NXObject) - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setSignalTag(NXObject) - Method in interface nxopen.mechatronics.SignalConnectionBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setSignedVonMisesStress(boolean) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setSignificantPlaces(int) - Method in interface nxopen.cae.PostAnnotationPreference

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setSignificantPlaces(int) - Method in interface nxopen.cae.PostIdentifyPreference

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setSignificantPlaces(int) - Method in interface nxopen.cae.PostLegendPreference

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setSignificantPlaces(int) - Method in interface nxopen.cae.PostResultNavigatorPreference

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setSilhouettes(boolean) - Method in interface nxopen.drawings.GeneralViewStyle

Sets the status of silhouettes curves, if true silhouettes for selected drawing member views added else silhouettes removed from the selected member views.

setSilhouettes(boolean) - Method in interface nxopen.drawings.ViewCreationWizardBuilder

License requirements: drafting ("DRAFTING")
.

setSilhouettes(boolean) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder

License requirements: drafting ("DRAFTING")
.

setSilhouettes(boolean) - Method in interface nxopen.preferences.GeneralViewPreferences

Sets the status of silhouettes curves, if true silhouettes for selected drawing member views are added else silhouettes are removed from the selected member views.

setSimitFolder(String) - Method in interface nxopen.mechatronics.SensorsActuatorsListBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setSimitTemplate(String) - Method in interface nxopen.mechatronics.SensorsActuatorsListBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setSimpleConstruction(boolean) - Method in interface nxopen.features.MeshSurfaceBuilder

Sets
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

setSimpleCubicAlongSpine(boolean) - Method in interface nxopen.geometricutilities.LawBuilder

License requirements: None.

setSimpleDraftingAidPreferences(SimpleDraftingAidPreferences) - Method in interface nxopen.annotations.DatumData

Sets the SimpleDraftingAidPreferences object
License requirements: None.

setSimpleDraftingAidPreferences(SimpleDraftingAidPreferences) - Method in interface nxopen.annotations.DatumTargetData

Sets the SimpleDraftingAidPreferences object
License requirements: None.

setSimpleDraftingAidPreferences(SimpleDraftingAidPreferences) - Method in interface nxopen.annotations.FcfData

Sets the FCF preferences.

setSimpleDraftingAidPreferences(SimpleDraftingAidPreferences) - Method in interface nxopen.annotations.LabelData

Sets the SimpleDraftingAidPreferences object
License requirements: None.

setSimpleDraftingAidPreferences(SimpleDraftingAidPreferences) - Method in interface nxopen.annotations.NoteData

Sets the SimpleDraftingAidPreferences object
License requirements: None.

setSimpleHole(Point3d, boolean, ISurface, String) - Method in interface nxopen.features.HoleFeatureBuilder

Sets parameters for simple hole
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.

setSimplifiedBoundaryToggle(boolean) - Method in interface nxopen.geometricutilities.PatternFill

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setSimplifiedLayoutType(RectangularPattern.SimplifiedLayoutTypes) - Method in interface nxopen.geometricutilities.RectangularPattern

License requirements: None.

setSimplify(double) - Method in interface nxopen.ListCreator

License requirements: None.

setSimplifyCurveOption(boolean) - Method in interface nxopen.SketchEvaluator

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSimplifyFacesandEdges(boolean) - Method in interface nxopen.Catiav5Importer

License requirements: None.

setSimplifyGeometry(boolean) - Method in interface nxopen.AcisImporter

License requirements: None.

setSimplifyGeometry(boolean) - Method in interface nxopen.Catiav4Importer

License requirements: None.

setSimplifyGeometry(boolean) - Method in interface nxopen.DxfdwgImporter

License requirements: None.

setSimplifyGeometry(boolean) - Method in interface nxopen.IgesImporter

License requirements: None.

setSimplifyGeometry(boolean) - Method in interface nxopen.ProeImporter

License requirements: None.

setSimplifyGeometry(boolean) - Method in interface nxopen.Step203Importer

License requirements: None.

setSimplifyGeometry(boolean) - Method in interface nxopen.Step214Importer

License requirements: None.

setSimplifyGeometry(boolean) - Method in interface nxopen.Step242Importer

License requirements: None.

setSimplifyPath(boolean) - Method in interface nxopen.mechanicalrouting.CreatePathBuilder

License requirements: routing_base ("Routing Basic")
.

setSimplifyShapes(CutParametersSimplifyShapesTypes) - Method in interface nxopen.cam.MillCutParameters

License requirements: cam_base ("CAM BASE")
.

setSimulationDisplay(SimulationOptionsBuilder.SimulationDisplayMode) - Method in interface nxopen.cam.SimulationOptionsBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setSimulationObjects(SimSimulationObject[]) - Method in interface nxopen.cae.ImportSimulationBuilder

Set simulation objects to import
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setSingle(int) - Method in interface nxopen.WidthDefinition

License requirements: None.

setSingleDesignation(String) - Method in interface nxopen.mechatronics.SystemObject

Set the single designation including aspect, letter code and index.

setSingleFaceSet(boolean) - Method in interface nxopen.weld.WeldGrooveBuilder

License requirements: ugweld ("UG WELD")
.

setSingleLeg(boolean) - Method in interface nxopen.drawings.RevolvedSectionLineBuilder

Deprecated.

Deprecated in NX10.0.0. Use Drawings.SectionLineSegmentsBuilder#setSingleLeg

setSingleLeg(boolean) - Method in interface nxopen.drawings.SectionLineSegmentsBuilder

License requirements: None.

setSingleLineRepresentation(ShipbuildingLinesViewStyle.ShipbuildingLines, String, boolean) - Method in interface nxopen.drawings.ShipbuildingLinesViewStyle

Note: The initial values are set based on the customer defaults depending on whether the feature is a Profile or a Plate.

setSingleLineRepresentation(boolean) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setSingleLineRepresentation(boolean) - Method in interface nxopen.drawings.ViewStyleShipbuildingLinesBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setSingleLineRepresentation(ShipbuildingLinesViewPreferences.ShipbuildingLines, String, boolean) - Method in interface nxopen.preferences.ShipbuildingLinesViewPreferences

Note: The initial values are set based on the customer defaults depending on whether the feature is a Profile or a Plate.

setSingleOffset(boolean) - Method in interface nxopen.features.ToolingBoxBuilder

License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard") OR studio_free_form ("STUDIO FREE FORM") OR features_modeling ("FEATURES MODELING") OR solid_modeling ("SOLIDS MODELING")
.

setSingleOption(boolean) - Method in interface nxopen.cae.AssignNodalCSBuilder

License requirements: None.

setSinglePlyPerLayer(boolean) - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setSinglePlyPerLayer(boolean) - Method in interface nxopen.cae.LaminateFillSetupBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setSingleRoughnessValue(boolean) - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder

License requirements: drafting ("DRAFTING")
.

setSingleRoughnessValue(boolean) - Method in interface nxopen.annotations.SurfaceFinishBuilder

License requirements: None.

setSingleSegment(boolean) - Method in interface nxopen.features.StudioSplineBuilderEx

License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setSingleSelect(boolean) - Method in interface nxopen.blockstyler.ListBox

License requirements: None.

setSingleSelection(boolean) - Method in interface nxopen.features.StudioXformBuilder

Deprecated.

Deprecated in NX8.5.0. Use StudioXformBuilderEx instead.

setSingleSelection(boolean) - Method in interface nxopen.features.StudioXformBuilderEx

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setSingleSidedArrowLineLength(double) - Method in interface nxopen.annotations.SingleSidedDisplayBuilder

License requirements: drafting ("DRAFTING")
.

setSingleSidedValue(String) - Method in interface nxopen.validate.RequirementBuilder

License requirements: None.

setSingleSource(int) - Method in interface nxopen.WidthDefinition

License requirements: None.

setSingleStep(IsvControlPanelBuilder.SingleStepType) - Method in interface nxopen.sim.IsvControlPanelBuilder

Sets the single step in Tool Path Based Simulation
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setSingleStepMode(IsvControlPanelBuilder.SingleStepModeType) - Method in interface nxopen.sim.IsvControlPanelBuilder

Sets the single step mode in Machine Code Simulation
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setSingleTubeUsed(boolean) - Method in interface nxopen.features.StyledBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setSingleWidth(double) - Method in interface nxopen.WidthDefinition

License requirements: None.

setSize(double) - Method in interface nxopen.annotations.Centerline2dSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setSize(double) - Method in interface nxopen.annotations.Centerline3dSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setSize(double) - Method in interface nxopen.annotations.CenterMarkSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setSize(double) - Method in interface nxopen.annotations.CircleCenterlineSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setSize(double) - Method in interface nxopen.annotations.IdSymbolBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setSize(String) - Method in interface nxopen.annotations.LineWeldSideData

Sets the weld size
License requirements: None.

setSize(double) - Method in interface nxopen.annotations.SymmetricalCenterlineSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setSize(int) - Method in interface nxopen.cae.xyplot.TextStyleSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setSize(String) - Method in interface nxopen.cam.HoleBossSet

License requirements: cam_base ("CAM BASE")
.

setSize(CGMBuilder.SizeOption) - Method in interface nxopen.CGMBuilder

License requirements: None.

setSize(double) - Method in interface nxopen.display.Stage

Deprecated.

Deprecated in NX10.0.0. This functionality is no longer supported.

setSize(String) - Method in interface nxopen.features.shipdesign.ShipProfileCutoutBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setSize(SteelDistributionBuilder.SaSize) - Method in interface nxopen.features.shipdesign.SteelDistributionBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setSize(ImageCaptureBuilder.ImageSize) - Method in interface nxopen.gateway.ImageCaptureBuilder

License requirements: drafting ("DRAFTING")
.

setSize(PrintPDFBuilder.SizeOption) - Method in interface nxopen.PrintPDFBuilder

License requirements: None.

setSize(SketchPolygonBuilder.SizeType) - Method in interface nxopen.SketchPolygonBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setSizeEnum(int) - Method in interface nxopen.linedesigner.InsertSheetBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setSizeFactor(double) - Method in interface nxopen.drawings.ViewProjectedArrowSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setSizeFormat(HoleTableSettingsFormatBuilder.SizeFormatType) - Method in interface nxopen.annotations.HoleTableSettingsFormatBuilder

License requirements: drafting ("DRAFTING")
.

setSizeLetterCode(SizeLetterCode) - Method in interface nxopen.annotations.LineWeldSideData

Sets the weld size letter code (ISO and DIN only)
License requirements: None.

setSizeMethod(WeldMeasurementSizeMethod) - Method in interface nxopen.weld.WeldPointBuilder

Sets the measurement size method.

setSizeOption(LocalRemeshBuilder.Option) - Method in interface nxopen.cae.LocalRemeshBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setSizeOption(TurnToolBuilder.SizeOptions) - Method in interface nxopen.cam.TurnToolBuilder

License requirements: None.

setSizeOption(ImageBaseBuilder.SizeOptions) - Method in interface nxopen.display.ImageBaseBuilder

License requirements: None.

setSizeOption(HelixBuilder.SizeOptions) - Method in interface nxopen.features.HelixBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSizeOption(int) - Method in interface nxopen.features.LocalScaleCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setSizeOption(int) - Method in interface nxopen.features.MoveCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setSizeOption(HelixPattern.SizeOptions) - Method in interface nxopen.geometricutilities.HelixPattern

License requirements: None.

setSizePoint(Point) - Method in interface nxopen.SketchPolygonBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setSizePrecision(int) - Method in interface nxopen.tooling.StockSizeBuilder

License requirements: None.

setSizeSpiralType(SpiralPattern.SpiralDefineSize) - Method in interface nxopen.geometricutilities.SpiralPattern

License requirements: None.

setSizeString(WeldBeadSizeBuilder.Size) - Method in interface nxopen.weld.WeldBeadSizeBuilder

License requirements: ugweld ("UG WELD")
.

setSizeSubtype(MeshControlBuilder.SizeTypes) - Method in interface nxopen.cae.MeshControlBuilder

Sets the size type of mesh control
License requirements: nx_masterfem ("Finite Element Modeling")
.

setSizingMethod(PierceItemBuilder.SizingMethodOption) - Method in interface nxopen.die.PierceItemBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setSizingOption(CfdAutoRefinementConstraintBuilder.Sizing) - Method in interface nxopen.cae.CfdAutoRefinementConstraintBuilder

License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")
.

setSizingOption(CfdContactPreventionConstraintBuilder.Sizing) - Method in interface nxopen.cae.CfdContactPreventionConstraintBuilder

License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")
.

setSizingOption(CfdLocalResolutionConstraintBuilder.Sizing) - Method in interface nxopen.cae.CfdLocalResolutionConstraintBuilder

License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")
.

setSizingOption(MeshControlBuilder.SizingType) - Method in interface nxopen.cae.MeshControlBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setSketch(SketchCurves) - Method in interface nxopen.cae.GeneralGeometryBeamSectionBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setSketch(Sketch) - Method in interface nxopen.drawings.SketchSectionLineBuilder

Set the sketch
License requirements: drafting ("DRAFTING")
.

setSketch(Sketch) - Method in interface nxopen.features.SectionEditBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSketch(SketchFeature) - Method in interface nxopen.features.sheetmetal.BeadBuilder

Sets the Slave Sketch used by the Bead, If one exists.

setSketch(SketchFeature) - Method in interface nxopen.features.sheetmetal.BendBuilder

Sets the Sketch
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setSketch(SketchFeature) - Method in interface nxopen.features.sheetmetal.ContourFlangeBuilder

Sets the sketch
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setSketch(SketchFeature) - Method in interface nxopen.features.sheetmetal.ConvertToSheetmetalBuilder

Sets the internal sketch (used to specify rip curves), if it exists.

setSketch(SketchFeature) - Method in interface nxopen.features.sheetmetal.DimpleBuilder

Sets the Slave Sketch used by the Dimple, If one exists.

setSketch(SketchFeature) - Method in interface nxopen.features.sheetmetal.DrawnCutoutBuilder

Sets the Slave Sketch used by the Drawn Cutout, If one exists.

setSketch(SketchFeature) - Method in interface nxopen.features.sheetmetal.EdgeRipBuilder

Sets the Slave Sketch used by the Edge Rip, If one exists.

setSketch(SketchFeature) - Method in interface nxopen.features.sheetmetal.JogBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setSketch(SketchFeature) - Method in interface nxopen.features.sheetmetal.LouverBuilder

Sets the internal sketch used by the louver's section.

setSketch(SketchFeature) - Method in interface nxopen.features.sheetmetal.NormalCutoutBuilder

Sets the internal sketch used by the normal cutout, if it exists.

setSketch(SketchFeature) - Method in interface nxopen.features.sheetmetal.TabBuilder

Sets the sketch of tab
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setSketch(Sketch) - Method in interface nxopen.layout2d.InsertComponentBuilder

License requirements: nx_layout ("NX Layout")
.

setSketch(Sketch) - Method in interface nxopen.SketchExpressionModifierBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSketchActive(Sketch) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder

Sets the sketch to be active
License requirements: None.

setSketchDefaultAction(SessionModeling.SketchDefaultActionType) - Method in interface nxopen.preferences.SessionModeling

License requirements: None.

setSketchEditOption(SessionModeling.SketchEditType) - Method in interface nxopen.preferences.SessionModeling

License requirements: None.

setSketches(SketchExpressionModifierBuilder.EndCuts) - Method in interface nxopen.SketchExpressionModifierBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSketchGroupRelationScope(int) - Method in interface nxopen.features.CurveFinderBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setSketchGroupType(GroupBuilder.SketchType) - Method in interface nxopen.GroupBuilder

License requirements: None.

setSketchInternal(boolean) - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setSketchInternal(boolean) - Method in interface nxopen.linedesigner.RailingFeatureBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setSketchOnPath(boolean) - Method in interface nxopen.blockstyler.SuperPoint

License requirements: None.

setSketchOnPath(boolean) - Method in interface nxopen.blockstyler.SuperSection

License requirements: None.

setSketchOrient(SketchAlongPathBuilder.SketchOrientationType) - Method in interface nxopen.SketchAlongPathBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setSketchOrientation(Direction) - Method in interface nxopen.tooling.WireHoleBuilder

License requirements: None.

setSketchOrigin(Point) - Method in interface nxopen.SketchInPlaceBuilder

License requirements: None.

setSketchSection(Section) - Method in interface nxopen.features.shipdesign.PenetrationAssociationBuilder

License requirements: nx_penetration_mgmt ("Penetration Management")
.

setSketchWorkPlaneEmphasis(boolean) - Method in interface nxopen.preferences.SessionVisualizationEmphasis

Sets the setting that controls whether or not objects on the work plane are emphasized in the Sketch Task Environment.

setSkipChecking(boolean) - Method in interface nxopen.validate.ValidatorOptions

License requirements: None.

setSkipCheckingDontLoadPart(boolean) - Method in interface nxopen.validate.ValidatorOptions

License requirements: None.

setSkipEmptyLayer(boolean) - Method in interface nxopen.DxfdwgImporter

License requirements: None.

setSkipLabelBegin(int) - Method in interface nxopen.annotations.FrameBarElementStyleBuilder

License requirements: nx_ship_drafting ("Ship Drafting") OR drafting ("DRAFTING")
.

setSkipLabelFrequency(int) - Method in interface nxopen.annotations.FrameBarElementStyleBuilder

License requirements: nx_ship_drafting ("Ship Drafting") OR drafting ("DRAFTING")
.

setSkipLevel(Tag, int) - Method in interface nxopen.uf.UFPlist

Deprecated.

The equivalent Open C method has retired

setSkipOverriddenResultOption(boolean) - Method in interface nxopen.validate.ValidatorOptions

License requirements: None.

setSkipStep(boolean) - Method in interface nxopen.motion.MotionSolutionBuilder

License requirements: mechanisms ("MECHANISMS")
.

setSkipSteps(int) - Method in interface nxopen.cae.ResultProbeBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setSkipSteps(String) - Method in interface nxopen.motion.MotionSolutionBuilder

License requirements: mechanisms ("MECHANISMS")
.

setSkipTicBegin(int) - Method in interface nxopen.annotations.FrameBarElementStyleBuilder

License requirements: nx_ship_drafting ("Ship Drafting") OR drafting ("DRAFTING")
.

setSkipTicFrequency(int) - Method in interface nxopen.annotations.FrameBarElementStyleBuilder

License requirements: nx_ship_drafting ("Ship Drafting") OR drafting ("DRAFTING")
.

setSlantAngle(double) - Method in interface nxopen.annotations.TableCellStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setSlave(boolean) - Method in interface nxopen.routing.OffsetPath

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setSlaveAxisJoint(PhysicsJoint) - Method in interface nxopen.mechatronics.CouplingBuilder

Sets the slave axis.

setSlaveAxisType(CamBuilder.AxisJointType) - Method in interface nxopen.mechatronics.CamBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setSlaveMultiple(double) - Method in interface nxopen.mechatronics.GearBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setSlaveUnit(CamProfileBuilder.SlaveValueUnit) - Method in interface nxopen.mechatronics.CamProfileBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setSlaveUnit(GraphControlBuilder.SlaveValueUnit) - Method in interface nxopen.mechatronics.GraphControlBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setSlaveUnit(MotionProfileBuilder.SlaveValueUnit) - Method in interface nxopen.mechatronics.MotionProfileBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setSliceFormat(TBSSmoothBuilder.SliceFormatOption) - Method in interface nxopen.cae.optimization.TBSSmoothBuilder

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setSliceNormalVector(Direction) - Method in interface nxopen.cae.optimization.TBSSmoothBuilder

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setSliceNumber(int) - Method in interface nxopen.cae.optimization.TBSSmoothBuilder

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setSliding(boolean) - Method in interface nxopen.mechatronics.CurveOnCurveJointBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setSlipForces(TirePropertyTnoBuilder.SlipForcesType) - Method in interface nxopen.motion.TirePropertyTnoBuilder

License requirements: mechanisms ("MECHANISMS")
.

setSlipVelocity(double) - Method in interface nxopen.motion.CurveContactAdams

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using CurveContactAdams.slipVelocityExpression() to query or edit it.

setSlipVelocity(double) - Method in interface nxopen.motion.CurveContactRecurdyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using CurveContactRecurdyn.slipVelocityExpression() to query or edit it.

setSliverTol(double) - Method in interface nxopen.features.sheetmetal.CleanUpUtilityBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setSlopeAtEndPoint(Direction) - Method in interface nxopen.features.GeneralConicBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setSlopeAtStartPoint(Direction) - Method in interface nxopen.features.GeneralConicBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setSlopeControl(SectionSurfaceBuilderEx.SlopeControlType) - Method in interface nxopen.features.SectionSurfaceBuilderEx

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setSlotAttributes(String, String, int) - Method in interface nxopen.die.KeywayChildBuilder

Sets the slot attributes, note existance of attributes depends on usage in main feature.

setSlotAttributes(String, String, int) - Method in interface nxopen.die.KeywayParentBuilder

Sets the slot attributes, note existance of attributes depends on usage in main feature.

setSlots(ExpressionBlockBuilder.Slot[]) - Method in interface nxopen.mechatronics.ExpressionBlockBuilder

Sets all Slots.

setSlowdownDistanceOption(CornerControlBuilder.SlowdownDistanceOptions) - Method in interface nxopen.cam.CornerControlBuilder

License requirements: cam_base ("CAM BASE")
.

setSlugHoleAttributes(String, String, int, String) - Method in interface nxopen.die.PierceHoleChildBuilder

Sets the slug hole attributes, note existance of attributes depends on usage in main feature
License requirements: ug_die_design ("Die Design")
.

setSlugHoleAttributes(String, String, int, String) - Method in interface nxopen.die.PierceHoleParentBuilder

Sets the slug hole attributes, note existance of attributes depends on usage in main feature
License requirements: ug_die_design ("Die Design")
.

setSlugHoleDiameterIncrement(String) - Method in interface nxopen.die.PierceHoleChildBuilder

License requirements: ug_die_design ("Die Design")
.

setSlugHoleDiameterIncrement(String) - Method in interface nxopen.die.PierceHoleParentBuilder

License requirements: ug_die_design ("Die Design")
.

setSlugHoleOffset(String) - Method in interface nxopen.die.PierceHoleChildBuilder

License requirements: ug_die_design ("Die Design")
.

setSlugHoleOffset(String) - Method in interface nxopen.die.PierceHoleParentBuilder

License requirements: ug_die_design ("Die Design")
.

setSlugHoleShape(DirectionOption, IProfile[]) - Method in interface nxopen.die.PierceHoleChildBuilder

Sets the slug hole shape of the pierce hole
License requirements: ug_die_design ("Die Design")
.

setSlugPreviousParameterA(double) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setSlugPreviousParameterC1(double) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setSlugPreviousParameterC2(double) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setSlugRetentionFeature(Feature) - Method in interface nxopen.tooling.SlugRetentionBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setSmallAreaStatus(SmallAreaAvoidance.StatusTypes) - Method in interface nxopen.cam.SmallAreaAvoidance

License requirements: cam_base ("CAM BASE")
.

setSmallFeature(HiddenLineSmallFeatureOption) - Method in interface nxopen.drawings.HiddenLinesViewStyle

Sets the small feature option.

setSmallFeature(HiddenLineSmallFeatureOption) - Method in interface nxopen.drawings.ViewStyleHiddenLinesBuilder

License requirements: drafting ("DRAFTING")
.

setSmallFeature(HiddenLineSmallFeatureOption) - Method in interface nxopen.preferences.HiddenLinesViewPreferences

Sets the small feature option.

setSmallFeatures(CustomViewSettingsBuilder.Features) - Method in interface nxopen.drawings.CustomViewSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setSmallFeaturesTolerance(double) - Method in interface nxopen.drawings.HiddenLinesViewStyle

Sets the value of small features tolerance.

setSmallFeaturesTolerance(double) - Method in interface nxopen.drawings.ViewStyleHiddenLinesBuilder

License requirements: drafting ("DRAFTING")
.

setSmallFeaturesTolerance(double) - Method in interface nxopen.preferences.HiddenLinesViewPreferences

Sets the value of small features tolerance.

setSmartCollector(ScCollector) - Method in interface nxopen.features.ChamferBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSmartlightweightViewsLoadComponentOnDemand(boolean) - Method in interface nxopen.preferences.SessionDrafting

Sets the load on demand flag
License requirements: None.

setSmartLod(boolean) - Method in interface nxopen.JtCreator

License requirements: None.

setSmartUpdateOptionAsString(String) - Method in interface nxopen.blockstyler.SectionBuilder

License requirements: None.

setSmartUpdateOptionAsString(String) - Method in interface nxopen.blockstyler.SelectObject

License requirements: None.

setSmartUpdateOptionAsString(String) - Method in interface nxopen.blockstyler.SpecifyCSYS

License requirements: None.

setSmartUpdateOptionAsString(String) - Method in interface nxopen.blockstyler.SuperSection

License requirements: None.

setSmartUpdteOptionAsString(String) - Method in interface nxopen.blockstyler.SpecifyCSYS

Deprecated.

Deprecated in NX9.0.1. Use BlockStyler.SpecifyCSYS#setSmartUpdateOptionAsString instead

setSmashSymbol(boolean) - Method in interface nxopen.annotations.BaseCustomSymbolBuilder

License requirements: drafting ("DRAFTING")
.

setSmoothBSurf(boolean) - Method in interface nxopen.IgesImporter

License requirements: None.

setSmoothBSurfaces(boolean) - Method in interface nxopen.Step203Importer

License requirements: None.

setSmoothBSurfaces(boolean) - Method in interface nxopen.Step214Importer

License requirements: None.

setSmoothBSurfaces(boolean) - Method in interface nxopen.Step242Importer

License requirements: None.

setSmoothCornersAt(CornerControlBuilder.SmoothCornersAtOptions) - Method in interface nxopen.cam.CornerControlBuilder

License requirements: cam_base ("CAM BASE")
.

setSmoothCycles(int) - Method in interface nxopen.cae.optimization.TBSSmoothBuilder

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setSmoothEdge(boolean) - Method in interface nxopen.drawings.SmoothEdgesViewStyle

Sets the status of smooth edge.

setSmoothEdge(boolean) - Method in interface nxopen.drawings.ViewStyleSmoothEdgesBuilder

License requirements: drafting ("DRAFTING")
.

setSmoothEdge(boolean) - Method in interface nxopen.preferences.SmoothEdgesViewPreferences

Sets the status of smooth edge.

setSmoothEdgeColor(NXColor) - Method in interface nxopen.drawings.CustomViewSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setSmoothEdgeColor(int) - Method in interface nxopen.drawings.SmoothEdgesViewStyle

Sets the color of smooth edge.

setSmoothEdgeColor(int) - Method in interface nxopen.preferences.SmoothEdgesViewPreferences

Sets the color of smooth edge.

setSmoothEdgeEndGaps(boolean) - Method in interface nxopen.drawings.SmoothEdgesViewStyle

Sets the status of smooth edge end gaps.

setSmoothEdgeEndGaps(boolean) - Method in interface nxopen.preferences.SmoothEdgesViewPreferences

Sets the status of smooth edge end gaps.

setSmoothEdgeEndGapsData(double) - Method in interface nxopen.drawings.SmoothEdgesViewStyle

Sets the value of smooth edge end gaps.

setSmoothEdgeEndGapsData(double) - Method in interface nxopen.preferences.SmoothEdgesViewPreferences

Sets the value of smooth edge end gaps.

setSmoothEdgeFont(CustomViewSettingsBuilder.Font) - Method in interface nxopen.drawings.CustomViewSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setSmoothEdgeFont(Font) - Method in interface nxopen.drawings.SmoothEdgesViewStyle

Sets the font of smooth edge.

setSmoothEdgeFont(Font) - Method in interface nxopen.preferences.SmoothEdgesViewPreferences

Sets the font of smooth edge.

setSmoothEdgeTolerance(boolean) - Method in interface nxopen.drawings.SmoothEdgesViewStyle

Sets the status of smooth edge angle tolerance.

setSmoothEdgeTolerance(boolean) - Method in interface nxopen.preferences.SmoothEdgesViewPreferences

Sets the status of smooth edge angle tolerance.

setSmoothEdgeToleranceData(double) - Method in interface nxopen.drawings.SmoothEdgesViewStyle

Sets the value of smooth edge angle tolerance in degrees.

setSmoothEdgeToleranceData(double) - Method in interface nxopen.preferences.SmoothEdgesViewPreferences

Sets the value of smooth edge angle tolerance in degrees.

setSmoothEdgeWidth(CustomViewSettingsBuilder.Width) - Method in interface nxopen.drawings.CustomViewSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setSmoothEdgeWidth(Width) - Method in interface nxopen.drawings.SmoothEdgesViewStyle

Sets the width of smooth edge.

setSmoothEdgeWidth(Width) - Method in interface nxopen.preferences.SmoothEdgesViewPreferences

Sets the width of smooth edge.

setSmoothFactor(int) - Method in interface nxopen.facet.SmoothFacetBodyBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setSmoothFactor(int) - Method in interface nxopen.features.FitSurfaceBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setSmoothFactor(int) - Method in interface nxopen.features.RefitFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSmoothing(WedmGeomBuilder.CornerSmoothingType) - Method in interface nxopen.cam.WedmGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setSmoothing(WedmOperationBuilder.CornerSmoothingType) - Method in interface nxopen.cam.WedmOperationBuilder

License requirements: cam_base ("CAM BASE")
.

setSmoothing(TrimLineDevelopmentBuilder.SmoothingName) - Method in interface nxopen.die.TrimLineDevelopmentBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setSmoothingEnabled(boolean) - Method in interface nxopen.facet.FeatureExtractionBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setSmoothingFactor(double) - Method in interface nxopen.die.SpringbackCompensationBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR nx_freeform_2 ("advanced freeform modeling")
.

setSmoothingFactor(double) - Method in interface nxopen.facet.CurvatureBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setSmoothingFactor(double) - Method in interface nxopen.facet.FeatureExtractionBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setSmoothingFactor(int) - Method in interface nxopen.features.PoleSmoothingBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setSmoothingFactor(int) - Method in interface nxopen.features.SmoothSplineBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setSmoothingLevel(double) - Method in interface nxopen.cae.FluidDomainBuilder

License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")
.

setSmoothingOption(CornerControlBuilder.SmoothingOptions) - Method in interface nxopen.cam.CornerControlBuilder

License requirements: cam_base ("CAM BASE")
.

setSmoothingOption(NcmScBuilder.SmoothingOptions) - Method in interface nxopen.cam.NcmScBuilder

Deprecated.

Deprecated in NX9.0.0. Use NcmScBuilder.smoothingBuilder() instead.

setSmoothingOption(MeshTransformerBuilder.SmoothingType) - Method in interface nxopen.features.MeshTransformerBuilder

License requirements: None.

setSmoothingTolerance(double) - Method in interface nxopen.cam.IpwContainmentCurvesBuilder

License requirements: cam_base ("CAM BASE")
.

setSmoothLeadinDistance(double) - Method in interface nxopen.cam.WedmBasedGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setSmoothLeadinFlag(int) - Method in interface nxopen.cam.WedmBasedGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setSmoothLeadInOption(WedmGeomBuilder.SmoothLeadInTypes) - Method in interface nxopen.cam.WedmGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setSmoothLeadInOption(WedmOperationBuilder.SmoothLeadInTypes) - Method in interface nxopen.cam.WedmOperationBuilder

License requirements: cam_base ("CAM BASE")
.

setSmoothLeadoutDistance(double) - Method in interface nxopen.cam.WedmBasedGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setSmoothLeadoutFlag(int) - Method in interface nxopen.cam.WedmBasedGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setSmoothLeadOutOption(WedmGeomBuilder.SmoothLeadOutTypes) - Method in interface nxopen.cam.WedmGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setSmoothLeadOutOption(WedmOperationBuilder.SmoothLeadOutTypes) - Method in interface nxopen.cam.WedmOperationBuilder

License requirements: cam_base ("CAM BASE")
.

setSmoothness(BridgeFacetBodyBuilder.SmoothTypes) - Method in interface nxopen.facet.BridgeFacetBodyBuilder

License requirements: None.

setSmoothness(int) - Method in interface nxopen.features.RapidSurfaceBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setSmoothNormals(boolean) - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setSmoothRangeFrom(Point) - Method in interface nxopen.features.SmoothRangeBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSmoothRangeTo(Point) - Method in interface nxopen.features.SmoothRangeBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSmoothRatio(double) - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setSmoothTolerance(double) - Method in interface nxopen.die.OutputCurvesBuilder

Sets the tolerance used for cubic or quintic smoothing.

setSmoothType(OutputCurvesBuilder.SmoothTypes) - Method in interface nxopen.die.OutputCurvesBuilder

Sets the smooth type
License requirements: die_engineering ("DIE ENGINEERING")
.

setSmoothType(FillHoleBuilder.SmoothTypes) - Method in interface nxopen.facet.FillHoleBuilder

License requirements: None.

setSnapAngle(double) - Method in interface nxopen.mechanicalrouting.CreatePathBuilder

License requirements: routing_base ("Routing Basic")
.

setSnapAngle(double) - Method in interface nxopen.preferences.SessionSketch

Sets the snap angle.

setSnapAngleLimit(double) - Method in interface nxopen.tooling.MWDesignGuideLinesBuilder

License requirements: None.

setSnapFloorToggle(boolean) - Method in interface nxopen.display.TrueShadingBuilder

License requirements: None.

setSnapLinks(boolean) - Method in interface nxopen.motion.JointDefine

Sets the option of snap links
License requirements: mechanisms ("MECHANISMS")
.

setSnapPointsPerMinor(int) - Method in interface nxopen.display.GridBuilder

License requirements: None.

setSnapPointToGrid(boolean) - Method in interface nxopen.weld.DatumSurfaceBuilder

License requirements: ugweld ("UG WELD")
.

setSnapPointTypesEnabled(int) - Method in interface nxopen.blockstyler.SectionBuilder

License requirements: None.

setSnapPointTypesEnabled(int) - Method in interface nxopen.blockstyler.SelectObject

License requirements: None.

setSnapPointTypesEnabled(int) - Method in interface nxopen.blockstyler.SpecifyPoint

License requirements: None.

setSnapPointTypesEnabled(int) - Method in interface nxopen.blockstyler.SuperPoint

License requirements: None.

setSnapPointTypesEnabled(int) - Method in interface nxopen.blockstyler.SuperSection

License requirements: None.

setSnapPointTypesOnByDefault(int) - Method in interface nxopen.blockstyler.AngularDimension

Deprecated.

Deprecated in NX9.0.0. This call can be safely removed as this is now a no-op.

setSnapPointTypesOnByDefault(int) - Method in interface nxopen.blockstyler.LinearDimension

Deprecated.

Deprecated in NX9.0.0. This call can be safely removed as this is now a no-op.

setSnapPointTypesOnByDefault(int) - Method in interface nxopen.blockstyler.OnPathDimension

Deprecated.

Deprecated in NX9.0.0. This call can be safely removed as this is now a no-op.

setSnapPointTypesOnByDefault(int) - Method in interface nxopen.blockstyler.RadiusDimension

Deprecated.

Deprecated in NX9.0.0. This call can be safely removed as this is now a no-op.

setSnapPointTypesOnByDefault(int) - Method in interface nxopen.blockstyler.SectionBuilder

License requirements: None.

setSnapPointTypesOnByDefault(int) - Method in interface nxopen.blockstyler.SelectObject

License requirements: None.

setSnapPointTypesOnByDefault(int) - Method in interface nxopen.blockstyler.SpecifyOrientation

License requirements: None.

setSnapPointTypesOnByDefault(int) - Method in interface nxopen.blockstyler.SpecifyPoint

License requirements: None.

setSnapPointTypesOnByDefault(int) - Method in interface nxopen.blockstyler.SpecifyVector

License requirements: None.

setSnapPointTypesOnByDefault(int) - Method in interface nxopen.blockstyler.SuperPoint

License requirements: None.

setSnapPointTypesOnByDefault(int) - Method in interface nxopen.blockstyler.SuperSection

License requirements: None.

setSnapRadius(double) - Method in interface nxopen.SketchDimensionBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setSnapShot(boolean) - Method in interface nxopen.drawings.ViewCreationWizardBuilder

License requirements: drafting ("DRAFTING")
.

setSnapshotDataToUse(TrackDrawingChangesGeneralBuilder.SnapshotDataToUseType) - Method in interface nxopen.drawings.TrackDrawingChangesGeneralBuilder

License requirements: drafting ("DRAFTING")
.

setSnapshotView(boolean) - Method in interface nxopen.drawings.GeneralViewStyle

License requirements: drafting ("DRAFTING")
.

setSnapshotView(boolean) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder

License requirements: drafting ("DRAFTING")
.

setSnapshotView(boolean) - Method in interface nxopen.preferences.GeneralViewPreferences

License requirements: drafting ("DRAFTING")
.

setSnapSize(BlankLayoutBuilder.SnapSizeOption) - Method in interface nxopen.tooling.BlankLayoutBuilder

License requirements: None.

setSnapToElbowAngles(boolean) - Method in interface nxopen.mechanicalrouting.CreatePathBuilder

License requirements: routing_base ("Routing Basic")
.

setSnapToElbowAngles(boolean) - Method in interface nxopen.routing.ElbowSnapSettings

Sets whether or not to snap control points to the nearest valid elbow angle.

setSnapToGrid(boolean) - Method in interface nxopen.display.GridBuilder

License requirements: None.

setSnapToGrid(boolean) - Method in interface nxopen.preferences.WorkPlane

Sets the snap to grid flag.

setSnapTolerance(double) - Method in interface nxopen.cae.ImprintBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setSnapToSourceBoundaries(boolean) - Method in interface nxopen.cae.FluidDomainBuilder

License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")
.

setSnipNearFacets(boolean) - Method in interface nxopen.facet.SnipFacetBodyBuilder

License requirements: None.

setSnippingPlane(Plane) - Method in interface nxopen.features.SnipSurfaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setSoftShadowsBiasOffset(double) - Method in interface nxopen.display.Shadows

License requirements: None.

setSoftShadowsEdges(int) - Method in interface nxopen.display.Shadows

License requirements: None.

setSoftShadowsEnabled(boolean) - Method in interface nxopen.display.Shadows

License requirements: None.

setSoftShadowsGradientClamp(double) - Method in interface nxopen.display.Shadows

License requirements: None.

setSoftShadowsQuality(int) - Method in interface nxopen.display.Shadows

License requirements: None.

setSoftShadowsToggle(boolean) - Method in interface nxopen.display.TrueShadingBuilder

License requirements: None.

setSoftwareProperties(boolean) - Method in interface nxopen.layout2d.ExportComponentHierarchyBuilder

License requirements: nx_layout ("NX Layout")
.

setSolidProperty(LaminatePly.SolidPropertyType) - Method in interface nxopen.cae.LaminatePly

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setSolids(boolean) - Method in interface nxopen.ObjectTypeSelector

License requirements: None.

setSolidType(DatumCommonBuilder.SolidTypes) - Method in interface nxopen.weld.DatumCommonBuilder

License requirements: ugweld ("UG WELD")
.

setSolidType(WeldCustom) - Method in interface nxopen.weld.WeldPointBuilder

Sets the output solid type.

setSolution(int) - Method in interface nxopen.AutomaticTraceline

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setSolution(SimSolution) - Method in interface nxopen.cae.LaminateDynamicSimBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setSolution(SimSolution) - Method in interface nxopen.cae.MechanicalLoadSumBuilder

The solution object
License requirements: nx_masterfem ("Finite Element Modeling")
.

setSolution(SimSolution) - Method in interface nxopen.cae.PreTestSolutionBuilder

License requirements: nx_correl_base ("FE Correlation")
.

setSolution(MotionSolution) - Method in interface nxopen.motion.ResultMeasureBuilder

License requirements: mechanisms ("MECHANISMS")
.

setSolutionHelpParams(double[]) - Method in interface nxopen.features.SectionSurfaceBuilderEx

For multiple solution case,set help point parameters to indicate which solution should be kept.

setSolutionHelpPositions(Point3d[]) - Method in interface nxopen.features.SectionSurfaceBuilderEx

For multiple solution case, set help point positions to indicate which solution should be kept.

setSolutionMergeOption(SolverAppendOption.SolutionOption) - Method in interface nxopen.cae.SolverAppendOption

Deprecated.

Deprecated in NX10.0.0. Functionality moved to the solver language DLLs.

setSolutionName(String, boolean) - Method in interface nxopen.cae.CorrelSolution

Sets the correlation solution name
License requirements: nx_correl_base ("FE Correlation")
.

setSolutionName(String) - Method in interface nxopen.cae.ImportedSolutionBuilder

The solution name
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setSolutionName(String, boolean) - Method in interface nxopen.cae.responsesimulation.Solution

Sets the response simulation solution name
License requirements: nx_response_anlys ("NX Response Analysis")
.

setSolutionName(String) - Method in interface nxopen.cae.SimMotionLoadsListItemBuilder

License requirements: None.

setSolutionObject(MotionSolution) - Method in interface nxopen.motion.GraphObjectBuilder

License requirements: mechanisms ("MECHANISMS")
.

setSolutions(SimSolution[]) - Method in interface nxopen.cae.ImportSimulationBuilder

Set solutions to import
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setSolutionType(MotionSolutionBuilder.SolutionTypes) - Method in interface nxopen.motion.MotionSolutionBuilder

License requirements: mechanisms ("MECHANISMS")
.

setSolveoptions(DurabilitySolveOptions) - Method in interface nxopen.cae.DurabilityEventBuilder

The event overrides.

setSolver(LaminateDrapingDataBuilder.SolverType) - Method in interface nxopen.cae.LaminateDrapingDataBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setSolver(MotionEnvironment.Solver) - Method in interface nxopen.motion.MotionEnvironment

Sets Motion solver
License requirements: mechanisms ("MECHANISMS")
.

setSolverAndAnalysisType(String, String) - Method in interface nxopen.cae.BaseFemPart

Deprecated.

Deprecated in NX9.0.0. Use BaseFemPart.setSolverAndAnalysisTypeAndAbstraction(java.lang.String, java.lang.String, nxopen.cae.BaseFemPart.AxisymAbstractionType) instead.

setSolverAndAnalysisTypeAndAbstraction(String, String, BaseFemPart.AxisymAbstractionType) - Method in interface nxopen.cae.BaseFemPart

Sets solver and analysis type and axisymmetric abstraction associated with the BaseFem part
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setSolverCardNameDisplayFlag(boolean) - Method in interface nxopen.cae.SimBCDisplay

Sets the true/false flag based on whether the solver card name of the BC is displayed in the graphics window
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setSolverConvergencyLevel(OnestepUnformBuilder.Convergency) - Method in interface nxopen.bodydes.OnestepUnformBuilder

License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setSolverConvergencyLevel(TrimLineDevelopmentBuilder.Convergency) - Method in interface nxopen.die.TrimLineDevelopmentBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setSolverDisplaySpringbackMode(OnestepUnformBuilder.DisplaySpringbackMode) - Method in interface nxopen.bodydes.OnestepUnformBuilder

License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setSolverDoSpringbackCalculation(boolean) - Method in interface nxopen.bodydes.OnestepUnformBuilder

License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setSolverInput(LaminateGraphicalReportBuilder.SolverInputType) - Method in interface nxopen.cae.LaminateGraphicalReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setSolverInput(LaminateSpreadsheetReportBuilder.SolverInputType) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setSolverJoinOutputCurves(boolean) - Method in interface nxopen.bodydes.OnestepUnformBuilder

License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setSolverJoinOutputCurves(boolean) - Method in interface nxopen.die.TrimLineDevelopmentBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setSolverMaxIterationSteps(int) - Method in interface nxopen.bodydes.OnestepUnformBuilder

License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setSolverMaxIterationSteps(int) - Method in interface nxopen.die.TrimLineDevelopmentBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setSolverName(String) - Method in interface nxopen.cae.SolverAppendOption

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setSolverOptions(String, String, BaseFemPart.AxisymAbstractionType) - Method in interface nxopen.cae.FemCreationOptions

Set Solver, Analysis Type, and Axisymmetric Abstraction Type
License requirements: None.

setSolverPlyStress(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

Deprecated.

Deprecated in NX9.0.0. Use LaminateSpreadsheetReportBuilder.setSolverInput(nxopen.cae.LaminateSpreadsheetReportBuilder.SolverInputType) instead.

setSolverResults(boolean) - Method in interface nxopen.motion.TirePropertyCdBuilder

License requirements: mechanisms ("MECHANISMS")
.

setSolverSaveAnalysisResultsIntoFeature(boolean) - Method in interface nxopen.bodydes.OnestepUnformBuilder

License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setSolverSaveAnalysisResultsIntoFeature(boolean) - Method in interface nxopen.die.TrimLineDevelopmentBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setSolverShellResultant(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

Deprecated.

Deprecated in NX9.0.0. Use LaminateSpreadsheetReportBuilder.setSolverInput(nxopen.cae.LaminateSpreadsheetReportBuilder.SolverInputType) instead.

setSolverType(Solver) - Method in interface nxopen.cae.optimization.DAOSolution

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setSolverType(Solver) - Method in interface nxopen.cae.optimization.DAOSolutionBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setSolvingTolerance(double) - Method in interface nxopen.preferences.SessionSketch

Sets the sketch solving tolerance.

setSolvingTolerance(double) - Method in interface nxopen.preferences.SketchPreferences

Sets the sketch solving tolerance.

setSort2Access(boolean) - Method in interface nxopen.cae.DurabilityTransientEventBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setSortColumn(BendTableSettingsBuilder.ColumnType) - Method in interface nxopen.annotations.BendTableSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setSortedList(NXObject[]) - Method in interface nxopen.routing.StockBrowserBuilder

Set the filtered stock object list when filter type is changed.

setSortOnUpdate(boolean) - Method in interface nxopen.annotations.BendTableSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setSortOnUpdate(boolean) - Method in interface nxopen.annotations.PartsListBuilder

License requirements: None.

setSortOrder(LaminateSpreadsheetReportBuilder.SortOrderType) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setSortRootNodes(boolean) - Method in interface nxopen.blockstyler.Tree

License requirements: None.

setSortType(LaminateSpreadsheetReportBuilder.SortingType) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setSource(String, String) - Method in interface nxopen.cam.BlankIpw

Set the blank ipw source
License requirements: cam_base ("CAM BASE")
.

setSource(NXObject[]) - Method in interface nxopen.mechatronics.ObjectSinkBuilder

Sets the source.

setSource(String) - Method in interface nxopen.mechatronics.RuntimeBehaviorBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setSourceData(NXObject[]) - Method in interface nxopen.features.shipdesign.ShipPreparationInfo

Sets the source data of the object.

setSourceDirection(Direction) - Method in interface nxopen.features.FlatteningAndFormingBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSourceElementEdgePathMethod(ElemEdgePathMethod) - Method in interface nxopen.cae.MeshFromBoundaryBuilder

Set the source element path of the selection
License requirements: nx_masterfem ("Finite Element Modeling")
.

setSourceGroup(CaeGroup) - Method in interface nxopen.cae.CAEConnectionBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setSourceLabel(String) - Method in interface nxopen.cae.SimLoadRecipeSource

License requirements: nx_masterfem ("Finite Element Modeling")
.

setSourceList(PackagingMeasureBuilder.GeometryData[]) - Method in interface nxopen.motion.PackagingMeasureBuilder

Sets the source geometry data.

setSourceOption(FlexBodyBuilder.SourceType) - Method in interface nxopen.motion.FlexBodyBuilder

License requirements: mechanisms ("MECHANISMS")
.

setSourceOrigin(Point) - Method in interface nxopen.features.FlatteningAndFormingBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSourcePart(TaggedObject) - Method in interface nxopen.annotations.PmiWaveLinkBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSourcePart(Part) - Method in interface nxopen.layout2d.CreateComponentFrom3DBuilder

Sets the source part to create 2D component from.

setSourcePartNameAttribute(String) - Method in interface nxopen.drawings.ConversionProcessSettingsBuilder

License requirements: convert_to_pmi (" Convert To PMI"), drafting ("DRAFTING")
.

setSourcePartOccurrence(TaggedObject) - Method in interface nxopen.features.CompositeCurveBuilder

License requirements: None.

setSourcePartOccurrence(TaggedObject) - Method in interface nxopen.features.ExtractFaceBuilder

License requirements: None.

setSourcePartOccurrence(TaggedObject) - Method in interface nxopen.features.MirrorBodyBuilder

License requirements: None.

setSourcePartOccurrence(TaggedObject) - Method in interface nxopen.features.WaveDatumBuilder

License requirements: None.

setSourcePartOccurrence(TaggedObject) - Method in interface nxopen.features.WaveInterfaceLinkerBuilder

License requirements: None.

setSourcePartOccurrence(TaggedObject) - Method in interface nxopen.features.WavePointBuilder

License requirements: None.

setSourcePartOccurrence(TaggedObject) - Method in interface nxopen.features.WaveSketchBuilder

License requirements: None.

setSourcePartOccurrences(TaggedObject[]) - Method in interface nxopen.features.CompositeCurveBuilder

Sets source part occurrences
License requirements: None.

setSourcePartOccurrences(TaggedObject[]) - Method in interface nxopen.features.ExtractFaceBuilder

Sets source part occurrences
License requirements: None.

setSourcePartOccurrences(TaggedObject[]) - Method in interface nxopen.features.MirrorBodyBuilder

Sets source part occurrences
License requirements: None.

setSourcePartOccurrences(TaggedObject[]) - Method in interface nxopen.features.WaveDatumBuilder

Sets source part occurrences
License requirements: None.

setSourcePartOccurrences(TaggedObject[]) - Method in interface nxopen.features.WavePointBuilder

Sets source part occurrences
License requirements: None.

setSourcePartOccurrences(TaggedObject[]) - Method in interface nxopen.features.WaveSketchBuilder

Sets source part occurrences
License requirements: None.

setSourcePosition(Point) - Method in interface nxopen.display.LightBuilder

License requirements: None.

setSourceScope(RelinkerBuilder.LinkScope) - Method in interface nxopen.assemblies.RelinkerBuilder

License requirements: wave ("WAVE FUNCTIONALITY")
.

setSourceSimPart(SimPart) - Method in interface nxopen.cae.ImportSimulationBuilder

Set source simulation part
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setSourceType(ObjectTransformerBuilder.TransformSourceType) - Method in interface nxopen.mechatronics.ObjectTransformerBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setSpaceFactor(double) - Method in interface nxopen.annotations.LineWeldBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setSpaceFactor(double) - Method in interface nxopen.weld.WeldPmiBuilder

License requirements: ugweld ("UG WELD") OR structure_weld ("STRUCTURE WELD")
.

setSpaceReservationMode(RoutingStock.SpaceReservationModeFlag) - Method in interface nxopen.preferences.RoutingStock

Sets the space reservation creation mode
License requirements: routing_base ("Routing Basic")
.

setSpaceReservationTranslucency(int) - Method in interface nxopen.preferences.RoutingStock

Sets the desired translucnecy of the newly created Space Reservation Stock
License requirements: routing_base ("Routing Basic")
.

setSpaceSize(double) - Method in interface nxopen.preferences.PartVisualizationLine

Sets the space size.

setSpaceType(PatternSpacing.SpacingType) - Method in interface nxopen.geometricutilities.PatternSpacing

License requirements: None.

setSpacing(int) - Method in interface nxopen.cae.AfuAbscissaHeaderInfo

Sets the value of spacing
License requirements: nx_ftk ("NX Advanced Graphing")
.

setSpacing(RSEvent.SpacingType) - Method in interface nxopen.cae.responsesimulation.RSEventAttributes

License requirements: nx_response_anlys ("NX Response Analysis")
.

setSpacing(double) - Method in interface nxopen.features.IsoparametricCurvesBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSpacing(EdgeCutBuilder.ArraySpacing) - Method in interface nxopen.features.shipdesign.EdgeCutBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setSpacing(double) - Method in interface nxopen.geometricanalysis.sectionanalysis.CurveAlignedBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setSpacing(double) - Method in interface nxopen.geometricanalysis.sectionanalysis.IsoparametricBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setSpacing(double) - Method in interface nxopen.geometricanalysis.sectionanalysis.ParallelPlanesExBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setSpacing(double) - Method in interface nxopen.geometricanalysis.sectionanalysis.RadialBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setSpacing(double) - Method in interface nxopen.geometricanalysis.sectionanalysis.XYZPlaneBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setSpacing(boolean) - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. Use WeldGrooveBuilder.method() and WeldGrooveBuilder.setMethod(nxopen.weld.WeldGrooveBuilder.SkipWeldMethod) instead.

setSpacingAlongCurveType(SectionCurveBuilder.SpacingType) - Method in interface nxopen.features.SectionCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSpacingCalculateMethod(WeldSpacingCalcMethod) - Method in interface nxopen.weld.WeldPointBuilder

Sets the project method type.

setSpacingDistance(String) - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. Use WeldGrooveBuilder.spacing() instead.

setSpacingEnabled(boolean) - Method in interface nxopen.features.IsoparametricCurvesBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSpacingEnabled(boolean) - Method in interface nxopen.geometricanalysis.sectionanalysis.CurveAlignedBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setSpacingEnabled(boolean) - Method in interface nxopen.geometricanalysis.sectionanalysis.IsoparametricBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setSpacingEnabled(boolean) - Method in interface nxopen.geometricanalysis.sectionanalysis.ParallelPlanesExBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setSpacingEnabled(boolean) - Method in interface nxopen.geometricanalysis.sectionanalysis.RadialBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setSpacingEnabled(boolean) - Method in interface nxopen.geometricanalysis.sectionanalysis.XYZPlaneBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setSpacingLength(double) - Method in interface nxopen.weld.WeldJointBuilder

License requirements: structure_weld ("STRUCTURE WELD")
.

setSpacingMethod(EasyPatternBuilder.SpacingMethodTypes) - Method in interface nxopen.weld.EasyPatternBuilder

License requirements: ugweld ("UG WELD")
.

setSpacingMethod(JointmarkGuideBuilder.SpaceMethod) - Method in interface nxopen.weld.JointmarkGuideBuilder

License requirements: ugweld ("UG WELD")
.

setSpacingNumber(String) - Method in interface nxopen.weld.WeldPointBuilder

License requirements: ugweld ("UG WELD")
.

setSpacingNumberOfElements(int) - Method in interface nxopen.cae.MeshControlBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setSpacingOption(JointmarkGuideBuilder.SpaceOption) - Method in interface nxopen.weld.JointmarkGuideBuilder

License requirements: ugweld ("UG WELD")
.

setSpareDialogForDragAndDrop(boolean) - Method in interface nxopen.linedesigner.ReuseLibraryDragData

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setSpatialMap(SpatialMap) - Method in interface nxopen.fields.Field

Set the spatial map for the formula field.

setSpatialResolution(double) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setSpCurveTolerance(double) - Method in interface nxopen.NXTo2dCreator

License requirements: None.

setSpecialBaseView(boolean) - Method in interface nxopen.drawings.ViewCreationWizardBuilder

License requirements: drafting ("DRAFTING")
.

setSpecialization(String) - Method in interface nxopen.FileNew

License requirements: None.

setSpecialOutputMode(OrientGeomBuilder.SpecialOutputModes) - Method in interface nxopen.cam.OrientGeomBuilder

Sets the Special Output
License requirements: cam_base ("CAM BASE")
.

setSpecificationOption(String) - Method in interface nxopen.routing.DefineRunBuilder

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setSpecificColor(boolean) - Method in interface nxopen.assemblies.AssembliesGeneralPropertiesBuilder

License requirements: None.

setSpecificInArrangement(Arrangement, boolean) - Method in interface nxopen.positioning.ComponentConstraint

Set the arrangement specific state of this ComponentConstraint in the specified Arrangement .

setSpecificPartialShade(boolean) - Method in interface nxopen.assemblies.AssembliesGeneralPropertiesBuilder

License requirements: None.

setSpecificTranslucency(boolean) - Method in interface nxopen.assemblies.AssembliesGeneralPropertiesBuilder

License requirements: None.

setSpecifiedCoordinateSystem(CoordinateSystem) - Method in interface nxopen.PartImporter

Sets the specified coordinate system.

setSpecifiedCoordinateSystem(CoordinateSystem, boolean) - Method in interface nxopen.PartImporter

Sets the specified coordinate system.

setSpecifiedLayer(int) - Method in interface nxopen.tooling.AddReusableFeatureBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setSpecifiedMCF(String) - Method in interface nxopen.mechatronics.RuntimeNCBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setSpecifiedNumberOfPoints(int) - Method in interface nxopen.cae.WeldBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setSpecifiedRotationPoint(Point) - Method in interface nxopen.geometricanalysis.sectionanalysis.RadialBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setSpecifiedSbfFile(String) - Method in interface nxopen.uf.UFDrf

Refer to UF_DRF_set_specified_sbf_file for documentation.

setSpecifiedStock(CharacteristicList) - Method in interface nxopen.routing.PathStockBuilder

Sets the specified stock to use for the Routing.PathStockBuilder.AssignMethod#SPECIFIED_STOCK method of stock assignment.

setSpecifiedStock(CharacteristicList, CharacteristicList) - Method in interface nxopen.routing.PathStockBuilder

Sets the specified stock and applied characteristics to use for the Routing.PathStockBuilder.AssignMethod#SPECIFIED_STOCK method of stock assignment.

setSpecifyBlend(boolean) - Method in interface nxopen.features.DeleteFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setSpecifyClearanceDataFile(String) - Method in interface nxopen.tooling.ClearanceManagementBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setSpecifyColor(ColorFeatureBuilder.OperationType) - Method in interface nxopen.features.ColorFeatureBuilder

License requirements: None.

setSpecifyContinuation(DrawingRegionBuilder.RegionContinuation) - Method in interface nxopen.drawings.DrawingRegionBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setSpecifyDieTip(Direction) - Method in interface nxopen.tooling.LayoutManagementBuilder

License requirements: None.

setSpecifyDirection(Direction) - Method in interface nxopen.features.shipdesign.RollingLineBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setSpecifyDistance(double) - Method in interface nxopen.cam.IpwContainmentCurvesBuilder

License requirements: cam_base ("CAM BASE")
.

setSpecifyFloorPlane(Plane) - Method in interface nxopen.display.Stage

License requirements: None.

setSpecifyGroundPlane(Plane) - Method in interface nxopen.display.EnvironmentBuilder

License requirements: None.

setSpecifyPlane(Plane) - Method in interface nxopen.die.DiePlaneBuilder

License requirements: ug_die_design ("Die Design")
.

setSpecifyPlane(Plane) - Method in interface nxopen.display.TrueShadingBuilder

License requirements: None.

setSpecifyPlane(Plane) - Method in interface nxopen.features.WrapBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSpecifyPoint(Point) - Method in interface nxopen.annotations.ArbitraryAreaSeedBuilder

License requirements: geometric_tol ("GDT")
.

setSpecifyPoint(Point) - Method in interface nxopen.cam.IpwContainmentCurvesBuilder

License requirements: cam_base ("CAM BASE")
.

setSpecifyPoint(Point) - Method in interface nxopen.features.shipdesign.OrientationPointMethodsBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setSpecifyPoint(Point) - Method in interface nxopen.FlatteningBuilder

Deprecated.

Deprecated in NX11.0.0. Use FlatteningAndFormingBuilder instead.

setSpecifyPoint(Point3d) - Method in interface nxopen.layout2d.InsertComponentBuilder

License requirements: nx_layout ("NX Layout")
.

setSpecifyPrimaryDirection(Direction) - Method in interface nxopen.FlatteningBuilder

Deprecated.

Deprecated in NX11.0.0. Use FlatteningAndFormingBuilder instead.

setSpecifyVector(Direction) - Method in interface nxopen.drawings.HingeLineBuilder

License requirements: None.

setSpecifyXPlane(Plane) - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setSpecifyYPlane(Plane) - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setSpectralLine(int) - Method in interface nxopen.cae.responsesimulation.FrequencyDefinition

License requirements: nx_response_anlys ("NX Response Analysis")
.

setSpectralLines(int) - Method in interface nxopen.cae.responsesimulation.RSEventAttributes

License requirements: nx_response_anlys ("NX Response Analysis")
.

setSpectrum(int) - Method in interface nxopen.cae.LaminateFiberOrientationOptionsBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setSpectrumLevels(int) - Method in interface nxopen.fields.DisplayPropertiesBuilder

License requirements: None.

setSpeed(int) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSpeed(double) - Method in interface nxopen.geometricutilities.PlayButtonsBuilder

License requirements: None.

setSpeed(int) - Method in interface nxopen.motion.PostProcess

Set the animation speed for motion animation
License requirements: mechanisms ("MECHANISMS")
.

setSpeed(int) - Method in interface nxopen.sim.IsvControlPanelBuilder

Simulation Control Panel: Simulation Speed
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setSpeed(int) - Method in interface nxopen.tooling.UnfoldingSimulationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setSpeed(UFVariant, double, UFSim.UnitType, double) - Method in interface nxopen.uf.UFSim

Refer to UF_SIM_set_speed for documentation.

setSpeedOption(TBSTopologyControllerOptimizationParameters.Speed) - Method in interface nxopen.cae.optimization.TBSTopologyControllerOptimizationParameters

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setSphere(NXObject) - Method in interface nxopen.cam.ProbeCalibrateSphereMoveBuilder

License requirements: cam_base ("CAM BASE")
.

setSphereAxisMethod(InspectionUVGridBuilder.SphereAxisType) - Method in interface nxopen.cam.InspectionUVGridBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSphereAxisVector(Direction) - Method in interface nxopen.cam.InspectionUVGridBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSphereColor(double[]) - Method in interface nxopen.facet.DetectPrimitivesBuilder

Sets the sphere color
License requirements: None.

setSphereSubdivisionLevelOption(SubdivisionPrimitiveShapeBuilderEx.SphereSubdivisionLevel) - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilderEx

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setSpikeLength(double) - Method in interface nxopen.geometricanalysis.DistanceAnalysisBuilder

License requirements: None.

setSpikeLength(double) - Method in interface nxopen.geometricanalysis.RadiusAnalysisBuilder

License requirements: None.

setSpikeLength(double) - Method in interface nxopen.geometricanalysis.SlopeAnalysisBuilder

License requirements: None.

setSpill(boolean) - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setSpin(boolean) - Method in interface nxopen.blockstyler.DoubleTable

License requirements: None.

setSpin(boolean) - Method in interface nxopen.blockstyler.IntegerTable

License requirements: None.

setSpindleEndPoint(Point) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSpindleFace(Face) - Method in interface nxopen.cam.ConvertFromMCDBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setSpindleFileLocation(TireEnvelopeBuilder.SpindleFileLocationOption) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSpindleFileName(String) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSpindleLinesLayer(int) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSpindleMode(CycleSpindle.Mode) - Method in interface nxopen.cam.CycleSpindle

License requirements: cam_base ("CAM BASE")
.

setSpindleRpmToggle(int) - Method in interface nxopen.cam.FeedsBuilder

License requirements: cam_base ("CAM BASE")
.

setSpindleSliderName(String) - Method in interface nxopen.tooling.SpindleSliderBuilder

License requirements: nx_dievalidation ("DIE VALIDATION")
.

setSpindleSliderVector(Direction) - Method in interface nxopen.tooling.SpindleSliderBuilder

License requirements: nx_dievalidation ("DIE VALIDATION")
.

setSpindleSpeed(double) - Method in interface nxopen.cam.CycleSpindle

License requirements: cam_base ("CAM BASE")
.

setSpindleStop(CenterlineDrillTurningBuilder.SpindleStopTypes) - Method in interface nxopen.cam.CenterlineDrillTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setSpine(Section) - Method in interface nxopen.features.FaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSpineEndFlowDirection(SectionSurfaceBuilderEx.SpineEndFlowType) - Method in interface nxopen.features.SectionSurfaceBuilderEx

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setSpineIntoBuilder(Section) - Method in interface nxopen.geometricutilities.LawBuilder

Sets the spine dynamically into builder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setSpineOption(AlongSpineBuilder.RetainSpineOption) - Method in interface nxopen.geometricutilities.AlongSpineBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setSpineRadius(double) - Method in interface nxopen.die.AddSurfBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setSpineRadius(double) - Method in interface nxopen.die.TrimLineDevelopmentBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setSpineStartFlowDirection(SectionSurfaceBuilderEx.SpineStartFlowType) - Method in interface nxopen.features.SectionSurfaceBuilderEx

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setSpineType(SectionSurfaceBuilderEx.Spine) - Method in interface nxopen.features.SectionSurfaceBuilderEx

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setSpineVector(Direction) - Method in interface nxopen.features.SectionSurfaceBuilderEx

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setSpiralNormal(Direction) - Method in interface nxopen.geometricutilities.SpiralPattern

License requirements: None.

setSpiralOrientationOption(PatternOrientation.Enum) - Method in interface nxopen.geometricutilities.PatternOrientation

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setSpiralStepoverDistance(double) - Method in interface nxopen.cam.DmSpiralBuilder

License requirements: None.

setSpiralStepoverPercent(double) - Method in interface nxopen.cam.DmSpiralBuilder

License requirements: None.

setSplineArcOutputType(ArcOutputTypeCiBuilder.SplineArcOutputTypes) - Method in interface nxopen.cam.ArcOutputTypeCiBuilder

License requirements: cam_base ("CAM BASE")
.

setSplineCurve(MotionFunction) - Method in interface nxopen.motion.RoadBuilder

License requirements: mechanisms ("MECHANISMS")
.

setSplineDefaultActionType(SessionModeling.SplineDefaultActionTypes) - Method in interface nxopen.preferences.SessionModeling

Sets the value indicating the default action for a spline.

setSplineFitTolerance(double) - Method in interface nxopen.cam.ArcOutputTypeCiBuilder

License requirements: cam_base ("CAM BASE")
.

setSplineFitToleranceType(ArcOutputTypeCiBuilder.SplineFitToleranceTypes) - Method in interface nxopen.cam.ArcOutputTypeCiBuilder

License requirements: cam_base ("CAM BASE")
.

setSplineLineOutputType(ArcOutputTypeCiBuilder.SplineLineOutputTypes) - Method in interface nxopen.cam.ArcOutputTypeCiBuilder

License requirements: cam_base ("CAM BASE")
.

setSplineMethod(StudioSplineBuilder.Method) - Method in interface nxopen.features.StudioSplineBuilder

Deprecated.

Deprecated in NX8.0.0. Use StudioSplineBuilderEx instead.

setSplineMethod(Constraint.SplineType) - Method in interface nxopen.routing.SplinePathBuilder

Sets the splines method to points or poles.

setSplineOptions(SplineOptions) - Method in interface nxopen.routing.HealPath

Set spline options.

setSplinePointsBy(PointSetBuilder.SplinePointsType) - Method in interface nxopen.features.PointSetBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSplinePointsType(Constraint.SplineType) - Method in interface nxopen.positioning.Constraint

Sets the type of the spline.

setSplineSap(Tag, int[], double) - Method in interface nxopen.uf.UFCurve

Deprecated.

The equivalent Open C method has retired

setSplineSettings(boolean, boolean) - Method in interface nxopen.routing.SubdivideSegmentBuilder

Sets options for subdividing splines.

setSplineSettings(boolean, boolean, boolean) - Method in interface nxopen.routing.SubdivideSegmentBuilder

Sets options for subdividing splines.

setSplitAlongGuide(boolean) - Method in interface nxopen.features.SectionSurfaceBuilderEx

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setSplitAngle(double) - Method in interface nxopen.weld.WeldJointBuilder

License requirements: structure_weld ("STRUCTURE WELD")
.

setSplitCurveOption(boolean) - Method in interface nxopen.features.AOCSBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSplitDirection(Division.SplitDirectionType) - Method in interface nxopen.routing.Division

License requirements: routing_hvac ("Routing HVAC")
.

setSplitDirection(DivisionsBuilder.SplitDirectionType) - Method in interface nxopen.routing.DivisionsBuilder

License requirements: routing_hvac ("Routing HVAC")
.

setSplitDirectionOption(SplitProfilePlateBuilder.SplitDirectionOptionType) - Method in interface nxopen.features.shipdesign.ShipTrimBodyBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setSplitDirectionOption(SplitProfilePlateBuilder.SplitDirectionOptionType) - Method in interface nxopen.features.shipdesign.SplitProfilePlateBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setSplitEdgeUpdateFlag(boolean) - Method in interface nxopen.features.shipdesign.PlateSystemBuilder

Sets the flag to indicate that split knuckle edges are out of date and need to update.

setSplitFeatureGroup(Feature) - Method in interface nxopen.features.shipdesign.RemoveSplitBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setSplitGap(double) - Method in interface nxopen.tooling.DieBaseBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setSplitLength(double) - Method in interface nxopen.weld.WeldJointBuilder

License requirements: structure_weld ("STRUCTURE WELD")
.

setSplitLineType(AttachElementsBuilder.SplitLineOption) - Method in interface nxopen.cae.AttachElementsBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setSplitMass(boolean) - Method in interface nxopen.cae.SolidPropertyCheckBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setSplitMethod(ElementSplitBuilder.SplitMethodType) - Method in interface nxopen.cae.ElementSplitBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setSplitMethod(OneDimensionalElementSplitBuilder.SplitMethodType) - Method in interface nxopen.cae.OneDimensionalElementSplitBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setSplitOption(WeldJointBuilder.SplitTypes) - Method in interface nxopen.weld.WeldJointBuilder

License requirements: structure_weld ("STRUCTURE WELD")
.

setSplitOutputAlongBoundaryCurves(boolean) - Method in interface nxopen.features.StudioSurfaceBuilder

License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

setSplitPlane(Plane) - Method in interface nxopen.tooling.SplitSolidBuilder

License requirements: None.

setSplitReinforcement(boolean) - Method in interface nxopen.features.shipdesign.SplitStandardPartBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setSplitSubSingle(DieBaseBuilder.SplitMethod) - Method in interface nxopen.tooling.DieBaseBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setSplitterAngle(double) - Method in interface nxopen.cam.ToolAxisAdvanced

License requirements: cam_base ("CAM BASE")
.

setSplitterColor(NXColor) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setSplitType(ToolPathSplitBuilder.SplitTypes) - Method in interface nxopen.cam.ToolPathSplitBuilder

License requirements: None.

setSplitType(ToolPathSplitParametersBuilder.SplitTypes) - Method in interface nxopen.cam.ToolPathSplitParametersBuilder

License requirements: None.

setSpreadsheetData(SpreadsheetData) - Method in interface nxopen.features.shipdesign.SteelFeatureSpreadsheetBuilder

It sets the KRUSpreadsheetData object to the builder.

setSpreadsheetData(double[], double[], boolean[]) - Method in interface nxopen.geometricutilities.PatternDefinition

Sets the spreadsheet data
License requirements: None.

setSpreadsheetData(SpreadsheetData) - Method in interface nxopen.tooling.AddReusablePart

Sets the spreadsheet data, this is mainly used to set the attributes of a reusable component
License requirements: None.

setSpreadsheetData(SpreadsheetData) - Method in interface nxopen.tooling.ReusableObjectPasteBuilder

Sets the spreadsheet data
License requirements: None.

setSpreadSheetFile(String) - Method in interface nxopen.features.shipdesign.QualifySketchBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setSpreadSheetFileName(String) - Method in interface nxopen.features.vehicledesign.BaseDataImportExportBuilder

License requirements: gateway ("UG GATEWAY")
.

setSpreadsheetItemID(String) - Method in interface nxopen.features.vehicledesign.BaseDataImportExportBuilder

License requirements: gateway ("UG GATEWAY")
.

setSpreadsheetItemName(String) - Method in interface nxopen.features.vehicledesign.BaseDataImportExportBuilder

License requirements: gateway ("UG GATEWAY")
.

setSpreadsheetItemRevision(String) - Method in interface nxopen.features.vehicledesign.BaseDataImportExportBuilder

License requirements: gateway ("UG GATEWAY")
.

setSpreadSheetPath(String) - Method in interface nxopen.features.shipdesign.QualifySketchBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setSpring(boolean) - Method in interface nxopen.cae.BoltBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setSpring(Tag, UFMotion.SpringDamper) - Method in interface nxopen.uf.UFMotion

Refer to UF_MOTION_set_spring for documentation.

setSpringbackAngle(String) - Method in interface nxopen.die.FlangeTaskBuilder

Sets the springback angle of the flange task
License requirements: die_engineering ("DIE ENGINEERING")
.

setSpringbackMethod(DieEngStampingOutputBuilder.SpringbackMethodType) - Method in interface nxopen.tooling.DieEngStampingOutputBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setSpringbackType(FlangeTaskBuilder.SpringbackTypes) - Method in interface nxopen.die.FlangeTaskBuilder

Sets the springback type of the flange task
License requirements: die_engineering ("DIE ENGINEERING")
.

setSpringForceMultiplier(double) - Method in interface nxopen.mechatronics.PreferencesBuilder

Deprecated.

Deprecated in NX9.0.0. This functionality is no longer supported.

setSpringPasses(int) - Method in interface nxopen.cam.ThreadMillingBuilder

License requirements: cam_base ("CAM BASE")
.

setSprungPoints(Point3d[]) - Method in interface nxopen.die.SpringbackCompensationBuilder

Set the sample points on the sprung surface.

setSprungPointsFile(String) - Method in interface nxopen.die.SpringbackCompensationBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR nx_freeform_2 ("advanced freeform modeling")
.

setSR1Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSR1LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSR1Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSR1RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSR2ALeft(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSR2ALeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSR2ARight(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSR2ARightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSR2BLeft(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSR2BLeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSR2BRight(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSR2BRightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSR2Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder

Deprecated.

Deprecated in NX11.0.0. Use HeadImpactSideRailDetailBuilder.setSR2ALeft(nxopen.Point) instead.

setSR2LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder

Deprecated.

Deprecated in NX11.0.0. Use HeadImpactSideRailDetailBuilder.setSR2ALeftFlag(boolean) instead.

setSR2Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder

Deprecated.

Deprecated in NX11.0.0. Use HeadImpactSideRailDetailBuilder.setSR2ARight(nxopen.Point) instead.

setSR2RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder

Deprecated.

Deprecated in NX11.0.0. Use HeadImpactSideRailDetailBuilder.setSR2ARightFlag(boolean) instead.

setSR3Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSR3Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailWizardBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSR3LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSR3Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSR3Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailWizardBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSR3RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailDetailBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSrfanlParams(UFDisp.SrfanlData) - Method in interface nxopen.uf.UFDisp

Refer to UF_DISP_set_srfanl_params for documentation.

setSsaoBlurRadius(double) - Method in interface nxopen.display.Shadows

License requirements: None.

setSsaoContrast(Shadows.SsaoContrastType) - Method in interface nxopen.display.Shadows

License requirements: None.

setSsaoQuality(Shadows.SsaoQualityType) - Method in interface nxopen.display.Shadows

License requirements: None.

setSsaoRadius(double) - Method in interface nxopen.display.Shadows

License requirements: None.

setStackAboveSpaceFactor(double) - Method in interface nxopen.annotations.LetteringPreferences

Sets the stack above spacing factor for space buffer above annotation in stack.

setStackAboveSpaceFactor(double) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setStackAutospace(boolean) - Method in interface nxopen.annotations.LetteringPreferences

Sets the flag indicating whether to automatically set the stack spacing to system derived values
License requirements: None.

setStackAutospace(boolean) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setStackBelowSpaceFactor(double) - Method in interface nxopen.annotations.LetteringPreferences

Sets the stack below spacing factor for space buffer below annotation in stack.

setStackBelowSpaceFactor(double) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setStackHorizontalAlignment(StackHorizontalAlignment) - Method in interface nxopen.annotations.LetteringPreferences

Sets the stack horizontal(left/right) alignment option
License requirements: None.

setStackHorizontalAlignment(StackHorizontalAlignment) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setStackingRecipe(LaminateGlobalLayup.StackingRecipeType) - Method in interface nxopen.cae.LaminateGlobalLayup

License requirements: nx_lam_composites ("Laminate Composites")
.

setStackInheritAssociatedObjects(boolean) - Method in interface nxopen.annotations.LetteringPreferences

Sets the flag indicating whether to inherit the associated objects of a stack when an annotation is inserted into a stack.

setStackInheritAssociatedObjects(boolean) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setStackLeftSpaceFactor(double) - Method in interface nxopen.annotations.LetteringPreferences

Sets the stack left spacing factor for space buffer left annotation in stack.

setStackLeftSpaceFactor(double) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setStackRightSpaceFactor(double) - Method in interface nxopen.annotations.LetteringPreferences

Sets the stack right spacing factor for space buffer right annotation in stack.

setStackRightSpaceFactor(double) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setStackVerticalAlignment(StackVerticalAlignment) - Method in interface nxopen.annotations.LetteringPreferences

Sets the stack vertical(above/below) alignment option
License requirements: None.

setStackVerticalAlignment(StackVerticalAlignment) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setStaggeredWeld(LineWeldBuilder.StaggeredWeldType) - Method in interface nxopen.annotations.LineWeldBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setStaggeredWeldSymbolDisplay(boolean) - Method in interface nxopen.annotations.LineWeldData

Sets the flag indicating whether the staggered weld symbol is displayed
License requirements: None.

setStaggerShiftAlongMethod(SeamBuilder.StaggerShiftAlongMethods) - Method in interface nxopen.features.shipdesign.SeamBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setStaggerType(CircularPattern.StaggerOptions) - Method in interface nxopen.geometricutilities.CircularPattern

License requirements: None.

setStaggerType(RectangularPattern.StaggerOptions) - Method in interface nxopen.geometricutilities.RectangularPattern

License requirements: None.

setStampingOutput(Feature) - Method in interface nxopen.die.FaceSheetBuilder

Sets the stamping output feature of the Face Sheet
License requirements: die_engineering ("DIE ENGINEERING")
.

setStandaloneFilterFormatFile(boolean) - Method in interface nxopen.preferences.RoutingElectrical

Sets the option to export the XML routelist data with the formats and filters information separately.

setStandAloneInsertSheet(boolean) - Method in interface nxopen.drawings.GeneralWorkFlowBuilder

License requirements: drafting ("DRAFTING")
.

setStandAloneProjectedView(boolean) - Method in interface nxopen.drawings.GeneralWorkFlowBuilder

License requirements: drafting ("DRAFTING")
.

setStandAloneProjectToView(boolean) - Method in interface nxopen.drawings.GeneralWorkFlowBuilder

License requirements: drafting ("DRAFTING")
.

setStandAloneViewCreation(boolean) - Method in interface nxopen.drawings.GeneralWorkFlowBuilder

License requirements: drafting ("DRAFTING")
.

setStandard(SurfaceFinishBuilder.StandardType) - Method in interface nxopen.annotations.SurfaceFinishBuilder

License requirements: None.

setStandard(String) - Method in interface nxopen.cam.ThreadedHoleSet

The Standard
License requirements: cam_base ("CAM BASE")
.

setStandard(SectionLineStyleBuilder.StandardStyle) - Method in interface nxopen.drawings.SectionLineStyleBuilder

Deprecated.

Deprecated in NX10.0.0. Use ViewSectionLineBuilder.setTypeStandard(nxopen.drawings.ViewSectionLineBuilder.DisplayType) instead.

setStandard(String) - Method in interface nxopen.features.vehicledesign.BumperPendulumBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setStandard(String) - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setStandard(String) - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setStandard(String) - Method in interface nxopen.features.vehicledesign.DynamicCurbBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setStandard(String) - Method in interface nxopen.features.vehicledesign.GroundClearanceBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setStandard(String) - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setStandard(String) - Method in interface nxopen.features.vehicledesign.InnerAngleBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setStandard(ManikinBuilder.StandardType) - Method in interface nxopen.features.vehicledesign.ManikinBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setStandard(String) - Method in interface nxopen.features.vehicledesign.OilPanBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setStandard(PedestrianProtectionBuilder.StandardType) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setStandard(SeatBeltAnchorageBuilder.StandardTypes) - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setStandard(String) - Method in interface nxopen.features.vehicledesign.SlopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setStandard(String) - Method in interface nxopen.features.vehicledesign.StaticCurbBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setStandard(String) - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setStandard(String) - Method in interface nxopen.features.vehicledesign.WheelFixingBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setStandard(NXObject, String) - Method in interface nxopen.tooling.ReusablePocketBuilder

Sets standard for hole series.

setStandardData(int) - Method in interface nxopen.drawings.ViewStyleThreadsBuilder

License requirements: drafting ("DRAFTING")
.

setStandardData(String) - Method in interface nxopen.tooling.ElectrodeComponentBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setStandardDeviation(double) - Method in interface nxopen.cae.LaminateRandomEventBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setStandardDeviation(double) - Method in interface nxopen.cae.responsesimulation.StrengthResultsEvaluationSettingBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setStandardEnglishScale(DrawingSheetBuilder.SheetStandardEnglishScale) - Method in interface nxopen.drawings.DrawingSheetBuilder

License requirements: drafting ("DRAFTING")
.

setStandardFontCharacterSpaceFactor(CharacterSpaceFactor) - Method in interface nxopen.preferences.AnnotationPreferences

Sets the standard font text space factor for each text type (dimension,general,appended,tolerance) for the part
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setStandardMetricScale(DrawingSheetBuilder.SheetStandardMetricScale) - Method in interface nxopen.drawings.DrawingSheetBuilder

License requirements: drafting ("DRAFTING")
.

setStandardName(String) - Method in interface nxopen.features.sheetmetal.AeroLighteningCutoutBuilder

License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setStandardName(String) - Method in interface nxopen.features.sheetmetal.LighteningCutoutBuilder

License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setStandardOrUserDefined(SpecialPiercingInsertBuilder.StandardOrUserDefinedTypes) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setStandardPart(String) - Method in interface nxopen.tooling.ElectrodeComponentBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setStandardPartEditType(StandardPartBuilder.EditType) - Method in interface nxopen.tooling.StandardPartBuilder

License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setStandardPartGroupOption(boolean) - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setStandardPartVersion(double) - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder

Set the standard part version.

setStandardPunchTag(TaggedObject) - Method in interface nxopen.tooling.PunchInsertBuilder

License requirements: None.

setStandardRunout(AeroJoggleBuilder.SideType, boolean) - Method in interface nxopen.features.sheetmetal.AeroJoggleBuilder

Set the Global flag for runout
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setStandardSymbolTextFont(String) - Method in interface nxopen.annotations.AnnotationManager

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setStandoffDistance(double) - Method in interface nxopen.cam.ProbeProtectedParametersBuilder

License requirements: cam_base ("CAM BASE")
.

setStart(double) - Method in interface nxopen.cam.PitchSetting

License requirements: cam_base ("CAM BASE")
.

setStart(IOrientation) - Method in interface nxopen.die.RibChildBuilder

Sets the start limit geometry of the die rib.

setStart(double) - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord

Deprecated.

Deprecated in NX8.5.0. Use CurveAnalysisDisplay .

setStartAlignFillerSurfaceOption(AlignmentMethodBuilder.AlignFillerSurfaceType) - Method in interface nxopen.geometricutilities.AlignmentMethodBuilder

Sets the start align filler surface option
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setStartAndDirection(ICurve, Point3d, Vector3d) - Method in interface nxopen.Section

Sets the start element and the direction of the section.

setStartAndDirectionToSection(Tag, double[], double[], Tag) - Method in interface nxopen.uf.UFModl

Refer to UF_MODL_set_start_and_direction_to_section for documentation.

setStartAndEndParametersEqual(boolean) - Method in interface nxopen.features.sheetmetal.BridgeTransitionBuilder

License requirements: nx_flexible_pcb ("NX Flexible PCB") OR nx_sheet_metal ("NX Sheet Metal")
.

setStartAngle(double) - Method in interface nxopen.cam.InspectionArcFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setStartAngle(double) - Method in interface nxopen.cam.RoughFinishTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setStartAngle(double) - Method in interface nxopen.features.SectionCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setStartAtArcCenter(boolean) - Method in interface nxopen.cam.NcmPlanarEngRetBuilder

License requirements: cam_base ("CAM BASE")
.

setStartBlendScaleFactor(double) - Method in interface nxopen.geometricutilities.ScalingMethodBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setStartByProfile(DirectionOption, IProfile[]) - Method in interface nxopen.die.RibChildBuilder

Sets the start limit geometry of the die rib using a profile.

setStartCapLimitPlaneOption(boolean) - Method in interface nxopen.features.FaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setStartCapSize(int) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setStartCapType(int) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setStartChamferEnabled(boolean) - Method in interface nxopen.geometricutilities.MiddleHoleData

License requirements: solid_modeling ("SOLIDS MODELING")
.

setStartChamferEnabled(boolean) - Method in interface nxopen.geometricutilities.StartHoleData

License requirements: solid_modeling ("SOLIDS MODELING")
.

setStartCheckConstantStock(double) - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder

License requirements: cam_base ("CAM BASE")
.

setStartCheckFaceStock(double) - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder

License requirements: cam_base ("CAM BASE")
.

setStartCheckRadialStock(double) - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder

License requirements: cam_base ("CAM BASE")
.

setStartClosestToPreviousRetract(boolean) - Method in interface nxopen.cam.BladeRough

License requirements: cam_base ("CAM BASE")
.

setStartContinuity(Continuity.ContinuityTypes) - Method in interface nxopen.geometricutilities.CurveShapingBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setStartContinuityOption(BridgeCurveBuilder.ConstraintTypes) - Method in interface nxopen.features.BridgeCurveBuilder

Deprecated.

Deprecated in NX8.5.0. Use BridgeCurveBuilderEx instead.

setStartCurveDirectionOption(BridgeCurveBuilder.CurveDirectionTypes) - Method in interface nxopen.features.BridgeCurveBuilder

Deprecated.

Deprecated in NX8.5.0. Use BridgeCurveBuilderEx instead.

setStartCurveOfClosedLoop(int, Point3d) - Method in interface nxopen.Section

Set the curve on which the specified point lies as the start curve of a specified single loop of the section.

setStartCut(double) - Method in interface nxopen.cam.DmTrimExtend

License requirements: cam_base ("CAM BASE")
.

setStartDeleteVolume(double) - Method in interface nxopen.cae.optimization.TBSTopologyControllerOptimizationParameters

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setStartDeltaAngle(double) - Method in interface nxopen.cam.TurnAvoidanceStartBuilder

License requirements: cam_base ("CAM BASE")
.

setStartDeltaDistance(double) - Method in interface nxopen.cam.TurnAvoidanceStartBuilder

License requirements: cam_base ("CAM BASE")
.

setStartDeltaVector(NXObject) - Method in interface nxopen.cam.TurnAvoidanceStartBuilder

License requirements: cam_base ("CAM BASE")
.

setStartDeltaX(double) - Method in interface nxopen.cam.TurnAvoidanceStartBuilder

License requirements: cam_base ("CAM BASE")
.

setStartDeltaY(double) - Method in interface nxopen.cam.TurnAvoidanceStartBuilder

License requirements: cam_base ("CAM BASE")
.

setStartDirection(Direction) - Method in interface nxopen.AutomaticTraceline

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setStartDirection(boolean) - Method in interface nxopen.features.SectionSurfaceBuilderEx

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setStartDistance(double) - Method in interface nxopen.cam.BoundaryTurnMemberOffset

License requirements: cam_base ("CAM BASE")
.

setStartDistance(double) - Method in interface nxopen.cam.InspectionCurveFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setStartDistance(double) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setStartDistance(double) - Method in interface nxopen.cam.InspectionScanArcBuilder

License requirements: None.

setStartDistance(double) - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder

License requirements: None.

setStartDistance(double) - Method in interface nxopen.cam.InspectionScanCurveBuilder

License requirements: None.

setStartDistance(double) - Method in interface nxopen.cam.InspectionScanLineBuilder

License requirements: None.

setStartDistance(double) - Method in interface nxopen.features.SectionCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setStartDistance(String) - Method in interface nxopen.geometricutilities.CurveLengthData

Set start distance
License requirements: solid_modeling ("SOLIDS MODELING")
.

setStartDistance(String) - Method in interface nxopen.weld.WeldPointBuilder

License requirements: ugweld ("UG WELD")
.

setStartDistanceLocation(WeldParasetLocation) - Method in interface nxopen.weld.WeldPointBuilder

Sets the start dist location
License requirements: ugweld ("UG WELD")
.

setStartEdgeConstraint(MatchEdgeBuilder.EdgeConstraintType) - Method in interface nxopen.features.MatchEdgeBuilder

License requirements: features_modeling ("FEATURES MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setStartEdgeLocked(boolean) - Method in interface nxopen.features.MatchEdgeBuilder

License requirements: features_modeling ("FEATURES MODELING")
.

setStartEndMode(InspectionCurveFeatureBuilder.StartEndModeType) - Method in interface nxopen.cam.InspectionCurveFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setStartEndMode(InspectionMethodBuilder.UVModeTypes) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setStartEndMode(InspectionMethodBuilder.UVModeTypes) - Method in interface nxopen.cam.InspectionScanArcBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setStartEndMode(InspectionMethodBuilder.UVModeTypes) - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setStartEndMode(InspectionMethodBuilder.UVModeTypes) - Method in interface nxopen.cam.InspectionScanCurveBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setStartEndMode(InspectionMethodBuilder.UVModeTypes) - Method in interface nxopen.cam.InspectionScanHelixBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setStartEndMode(InspectionMethodBuilder.UVModeTypes) - Method in interface nxopen.cam.InspectionScanLineBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setStartExtension(InheritableToolDepBuilder) - Method in interface nxopen.cam.FollowGeometryMoveBuilder

License requirements: cam_base ("CAM BASE")
.

setStartExtension(double) - Method in interface nxopen.routing.HealPath

Set start extension.

setStartExtensionEnabled(boolean) - Method in interface nxopen.features.HolePackageBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setStartExtensionOption(CurveExtensionBuilder.ExtensionOption) - Method in interface nxopen.geometricutilities.CurveExtensionBuilder

License requirements: features_modeling ("FEATURES MODELING")
.

setStartExtensionOption(SplineExtensionBuilder.ExtensionOption) - Method in interface nxopen.geometricutilities.SplineExtensionBuilder

License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setStartFlowDirection(SectionSurfaceBuilder.FlowDirectionEnum) - Method in interface nxopen.features.SectionSurfaceBuilder

Deprecated.

Deprecated in NX9.0.0. Use SectionSurfaceBuilderEx instead.

setStartFrameName(String) - Method in interface nxopen.features.shipdesign.InsertFramesBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setStartFrameName(String) - Method in interface nxopen.features.shipdesign.ItFrameListItemBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setStartFromCenter(boolean) - Method in interface nxopen.cam.NcmHoleMachining

License requirements: cam_base ("CAM BASE")
.

setStartFromCenter(boolean) - Method in interface nxopen.cam.NcmHoleMachiningEngRet

License requirements: cam_base ("CAM BASE")
.

setStartFromSafePlane(boolean) - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setStartHandlesLinked(boolean) - Method in interface nxopen.features.BridgeSurfaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setStartIteration(BaseIteration) - Method in interface nxopen.cae.Post3DGraphBuilder

Set start iteration
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setStartIteration(BaseIteration) - Method in interface nxopen.cae.PostGraphAcrossIterationsBuilder

Set start iteration
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setStartIterIndex(int) - Method in interface nxopen.cae.ResultProbeBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setStartIterValue(double) - Method in interface nxopen.cae.ResultProbeBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setStartLabel(int) - Method in interface nxopen.cae.MultipleElementCreateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setStartLabel(int) - Method in interface nxopen.cae.MultipleNodeCreateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setStartLimitFaceNormalFlag(boolean) - Method in interface nxopen.features.FaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setStartLimitFacesetCollector(ScCollector) - Method in interface nxopen.features.FaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setStartLimitHelperPoint(double[]) - Method in interface nxopen.features.RevolveBuilder

If until selected option is used for start limit and the selected entity intersects the revolve multiple times, this point (in parasolid units) will help the system determine which intersection to select.

setStartLimitPoint(Point) - Method in interface nxopen.features.FaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setStartLocked(boolean) - Method in interface nxopen.features.EdgeSymmetryBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setStartObject(NXObject) - Method in interface nxopen.mechanicalrouting.PathStockPreferenceBuilder

Sets the start object to use for the PathStockPreferenceBuilder.AssignMethod.FROM_START_OBJECT method of stock assignment.

setStartObject(NXObject) - Method in interface nxopen.routing.PathStockBuilder

Sets the start object to use for the Routing.PathStockBuilder.AssignMethod#FROM_START_OBJECT method of stock assignment.

setStartObjectType(BridgeCurveBuilderEx.StartObjectTypes) - Method in interface nxopen.features.BridgeCurveBuilderEx

License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_1 ("basic freeform modeling")
.

setStartOfEngageMotionType(TurnAvoidanceStartOfEngageBuilder.StartOfEngageMotionTypes) - Method in interface nxopen.cam.TurnAvoidanceStartOfEngageBuilder

License requirements: cam_base ("CAM BASE")
.

setStartOffset(double) - Method in interface nxopen.AutomaticTraceline

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setStartOffset(double) - Method in interface nxopen.cam.RoughFinishTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setStartOffset(String) - Method in interface nxopen.geometricutilities.FeatureOffset

Deprecated.

Deprecated in NX8.5.0. To set the value of the expression modify the expression directly using GeometricUtilities.FeatureOffset#startOffset and Expression.setRightHandSide(java.lang.String) .

setStartOffsetLock(boolean) - Method in interface nxopen.routing.OverstockBuilder

License requirements: routing_advanced ("Routing Advanced") OR routing_harness ("Routing Harness") OR routing_cabling ("Routing Cabling") OR routing_pipetube ("Routing Piping and Tubing") OR routing_hvac ("Routing HVAC") OR routing_platform ("Routing Platform") OR routing_pid ("Routing PID")
.

setStartOrientation(ISurface[]) - Method in interface nxopen.die.RotorBuilder

Sets the start orientation of the rotor casting.

setStartOrientation(ISurface) - Method in interface nxopen.die.SteelInsertBuilder

Sets the start orientation of the steelinsert
License requirements: ug_die_design ("Die Design")
.

setStartParms(double) - Method in interface nxopen.routing.HealPath

Set start parameters.

setStartPercent(double) - Method in interface nxopen.cam.BladeCutLevels

License requirements: cam_base ("CAM BASE")
.

setStartPercentage(double) - Method in interface nxopen.cam.InspectionCurveFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setStartPercentage(double) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setStartPercentage(double) - Method in interface nxopen.features.SectionCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setStartPlane(ISurface) - Method in interface nxopen.die.TrimTaskBuilder

Sets the start plane of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.

setStartPlane(Plane) - Method in interface nxopen.features.sheetmetal.AeroJoggleBuilder

Set the start plane
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setStartPlane(Plane) - Method in interface nxopen.features.sheetmetal.JoggleBuilder

License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setStartPlane(Plane) - Method in interface nxopen.features.shipdesign.PillarBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setStartPlane(Plane) - Method in interface nxopen.features.shipdesign.PlateChamferBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setStartPlane(Plane) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setStartPlaneSelected(boolean) - Method in interface nxopen.tooling.DieEngTrimTaskBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setStartPoint(Point) - Method in interface nxopen.annotations.RegionBuilder

License requirements: geometric_tol ("GDT")
.

setStartPoint(Point) - Method in interface nxopen.AutomaticTraceline

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setStartPoint(Point) - Method in interface nxopen.cae.LaminateDrapingDataBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setStartPoint(double) - Method in interface nxopen.cae.responsesimulation.ResponseResultsEvaluationSettingBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setStartPoint(Point) - Method in interface nxopen.cam.FollowGeometryMoveBuilder

License requirements: cam_base ("CAM BASE")
.

setStartPoint(Point) - Method in interface nxopen.cam.SplitSubopCommand

License requirements: None.

setStartPoint(Point) - Method in interface nxopen.cam.TabPointDataBuilder

License requirements: cam_base ("CAM BASE")
.

setStartPoint(Point) - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder

License requirements: cam_base ("CAM BASE")
.

setStartPoint(Point) - Method in interface nxopen.cam.TurnAvoidanceStartBuilder

License requirements: cam_base ("CAM BASE")
.

setStartPoint(Point) - Method in interface nxopen.features.GeneralConicBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setStartPoint(Point) - Method in interface nxopen.features.GeodesicLineBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setStartPoint(Point) - Method in interface nxopen.features.sheetmetal.FlexibleCableBuilder

Sets the start point.

setStartPoint(Point) - Method in interface nxopen.features.SpineCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setStartPoint(Point) - Method in interface nxopen.geometricutilities.CurveExtensionBuilder

License requirements: features_modeling ("FEATURES MODELING")
.

setStartPoint(Point) - Method in interface nxopen.geometricutilities.ModlMotion

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setStartPoint(Point) - Method in interface nxopen.geometricutilities.SelectDividingObjectBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setStartPoint(Point) - Method in interface nxopen.geometricutilities.SplineExtensionBuilder

License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setStartPoint(Point3d) - Method in interface nxopen.Line

Sets the start point of the line
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setStartPoint(Point3d) - Method in interface nxopen.routing.HealPath

Set the start point.

setStartPoint(Point) - Method in interface nxopen.SketchConicBuilder

License requirements: None.

setStartPoint(Point) - Method in interface nxopen.tooling.CoolingConnectBuilder

License requirements: None.

setStartPoint(Point) - Method in interface nxopen.tooling.CoolingDefineChannelBuilder

License requirements: None.

setStartPointDirection(Direction) - Method in interface nxopen.features.BridgeCurveBuilder

Deprecated.

Deprecated in NX8.5.0. Use BridgeCurveBuilderEx instead.

setStartPointMode(InspectionUVGridBuilder.StartPointType) - Method in interface nxopen.cam.InspectionUVGridBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setStartPointMode(TurnAvoidanceStartBuilder.StartPointModes) - Method in interface nxopen.cam.TurnAvoidanceStartBuilder

License requirements: cam_base ("CAM BASE")
.

setStartPointMotionType(TurnAvoidanceStartBuilder.StartPointMotionTypes) - Method in interface nxopen.cam.TurnAvoidanceStartBuilder

License requirements: cam_base ("CAM BASE")
.

setStartPointOptions(AssociativeArcBuilder.StartOption) - Method in interface nxopen.features.AssociativeArcBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setStartPointOptions(AssociativeLineBuilder.StartOption) - Method in interface nxopen.features.AssociativeLineBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setStartPointPoint(Point) - Method in interface nxopen.linedesigner.CreateFenceBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setStartPointReference(AssociativeArcBuilder.StartReference) - Method in interface nxopen.features.AssociativeArcBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setStartPointReference(AssociativeLineBuilder.StartReference) - Method in interface nxopen.features.AssociativeLineBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setStartPoints(Point[]) - Method in interface nxopen.cam.EditSubopCommand

Set the start point value
License requirements: None.

setStartPointsUseEffectDist(boolean) - Method in interface nxopen.cam.NcmSubopBuilder

License requirements: cam_base ("CAM BASE")
.

setStartPoleFixed(boolean) - Method in interface nxopen.features.MatchEdgeBuilder

License requirements: features_modeling ("FEATURES MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setStartPosition(VelocityImpactParameters.StartPositionType) - Method in interface nxopen.cae.responsesimulation.VelocityImpactParameters

License requirements: nx_response_anlys ("NX Response Analysis")
.

setStartPosition(CenterlineDrillTurningBuilder.StartPositionTypes) - Method in interface nxopen.cam.CenterlineDrillTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setStartPositionMethod(TeachmodeProfileMoveBuilder.StartStopPositionMethods) - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder

License requirements: cam_base ("CAM BASE")
.

setStartPositionPoint(Point) - Method in interface nxopen.cam.CenterlineDrillTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setStartProfileOriginCurveDirection(boolean) - Method in interface nxopen.routing.StockTransitionBuilder

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setStartReferencePoint(Point) - Method in interface nxopen.features.BridgeCurveBuilder

Deprecated.

Deprecated in NX8.5.0. Use BridgeCurveBuilderEx instead.

setStartRegionPoint(Point) - Method in interface nxopen.features.sheetmetal.SMBoundaryConditionBuilder

License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setStartRevolveAngle(double) - Method in interface nxopen.cae.AxiSymmetricParameters

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setStartSection(Section) - Method in interface nxopen.features.sheetmetal.LoftedFlangeBuilder

Sets the start section of the lofted flange.

setStartSection(boolean) - Method in interface nxopen.geometricutilities.SecondarySectionData

License requirements: None.

setStartSectionFile(String) - Method in interface nxopen.IgesCreator

License requirements: None.

setStartSectionPoint(Point3d) - Method in interface nxopen.features.sheetmetal.LoftedFlangeBuilder

Sets the start/end point of the start section.It can be start/end point of the section profile.

setStartSketch(SketchFeature) - Method in interface nxopen.features.sheetmetal.LoftedFlangeBuilder

Sets the start section sketch as slave.

setStartStation(int) - Method in interface nxopen.tooling.DirectUnfoldBuilder

License requirements: None.

setStartStation(int) - Method in interface nxopen.tooling.IntermediateStageBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setStartStep(double) - Method in interface nxopen.cam.DmTrimExtend

License requirements: cam_base ("CAM BASE")
.

setStartStopBeforeBoundaryOffset(boolean) - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder

License requirements: cam_base ("CAM BASE")
.

setStartSurfaceDirectionOption(BridgeCurveBuilder.SurfaceDirectionTypes) - Method in interface nxopen.features.BridgeCurveBuilder

Deprecated.

Deprecated in NX8.5.0. Use BridgeCurveBuilderEx instead.

setStartTangentDirection(TransitionCurveBuilder.TangentDirections) - Method in interface nxopen.geometricutilities.TransitionCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setStartTime(double) - Method in interface nxopen.mechatronics.GanttOperationBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setStartToolAxis(Direction) - Method in interface nxopen.cam.FollowGeometryMoveBuilder

License requirements: cam_base ("CAM BASE")
.

setStartTreatmentType(PillarBuilder.EndTreatmentTypes) - Method in interface nxopen.features.shipdesign.PillarBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setStartType(MiterOptions.TypeOptions) - Method in interface nxopen.features.sheetmetal.MiterOptions

Sets the miter start type.

setStartType1(BendTaperBuilder.StartType) - Method in interface nxopen.features.sheetmetal.BendTaperBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setStartType2(BendTaperBuilder.StartType) - Method in interface nxopen.features.sheetmetal.BendTaperBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setStartUDistance(double) - Method in interface nxopen.cam.InspectionSurfaceFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setStartUMode(InspectionMethodBuilder.UVModeTypes) - Method in interface nxopen.cam.InspectionUVGridBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setStartUPercent(double) - Method in interface nxopen.cam.InspectionSurfaceFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setStartValue(double) - Method in interface nxopen.cae.responsesimulation.FrequencyDefinition

License requirements: nx_response_anlys ("NX Response Analysis")
.

setStartValue(String) - Method in interface nxopen.features.sheetmetal.MiterOptions

Deprecated.

Deprecated in NX10.0.0. Use Expression.setRightHandSide(java.lang.String) on the Expression object returned from Features.SheetMetal.MiterOptions#getStartValue instead.

setStartValue(String) - Method in interface nxopen.routing.BranchPathNumberingBuilder

Deprecated.

Deprecated in NX8.5.2. Use Routing.BranchPathNumberingBuilder#setStartValueForNumbers , Routing.BranchPathNumberingBuilder#setStartValueForUpperCase , or Routing.BranchPathNumberingBuilder#setStartValueForLowerCase instead.

setStartValueForLowerCase(String) - Method in interface nxopen.routing.BranchPathNumberingBuilder

License requirements: routing_hvac ("Routing HVAC")
.

setStartValueForNumbers(String) - Method in interface nxopen.routing.BranchPathNumberingBuilder

License requirements: routing_hvac ("Routing HVAC")
.

setStartValueForUpperCase(String) - Method in interface nxopen.routing.BranchPathNumberingBuilder

License requirements: routing_hvac ("Routing HVAC")
.

setStartVDistance(double) - Method in interface nxopen.cam.InspectionSurfaceFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setStartVector(Vector3d) - Method in interface nxopen.routing.HealPath

Set the start vector.

setStartVector(boolean) - Method in interface nxopen.weld.FilletBuilder

License requirements: ugweld ("UG WELD")
.

setStartVectorI(double) - Method in interface nxopen.cam.InspectionArcFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setStartVectorJ(double) - Method in interface nxopen.cam.InspectionArcFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setStartVectorK(double) - Method in interface nxopen.cam.InspectionArcFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setStartVMode(InspectionMethodBuilder.UVModeTypes) - Method in interface nxopen.cam.InspectionUVGridBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setStartVPercent(double) - Method in interface nxopen.cam.InspectionSurfaceFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setState(DesignElementBuilder.StateType) - Method in interface nxopen.assemblies.DesignElementBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setState(int) - Method in interface nxopen.blockstyler.Node

Sets the node state which is associated with node state icon.

setState(boolean) - Method in interface nxopen.drawings.ViewStyleFPCalloutsBuilder

License requirements: drafting ("DRAFTING")
.

setState(boolean) - Method in interface nxopen.drawings.ViewStyleFPCurvesBuilder

License requirements: drafting ("DRAFTING")
.

setState(State) - Method in interface nxopen.layer.Category

Changes the state of every layer in the category to the specified state, except the work layer
License requirements: None.

setState(int, State) - Method in interface nxopen.layer.LayerManager

Sets the state of the specified layer.

setState(int, State, boolean) - Method in interface nxopen.layer.LayerManager

Sets the state of the specified layer.

setState(int, State) - Method in interface nxopen.layer.StateCollection

Sets the state of the specified layer
License requirements: None.

setState(int) - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setState(int) - Method in interface nxopen.tooling.UnfoldingSimulationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setStateIconNameHandler(Tree.StateIconNameCallback) - Method in interface nxopen.blockstyler.Tree

Sets the state icon name callback.

setStateOfCategory(Category, State) - Method in interface nxopen.layer.StateCollection

Sets the state of every layer in the category to the specified state, except the work layer
License requirements: None.

setStates(StateCollection, boolean) - Method in interface nxopen.layer.LayerManager

Sets the states for all layers in the part.

setStates(StateCollection) - Method in interface nxopen.layer.LayerManager

Sets the states for all layers in the part.

setStaticAnalysis(boolean) - Method in interface nxopen.motion.MotionSolutionBuilder

License requirements: mechanisms ("MECHANISMS")
.

setStaticAntialiasing(RayTracedStudioEditorBuilder.StaticAntialiasingType) - Method in interface nxopen.display.RayTracedStudioEditorBuilder

License requirements: None.

setStaticCoefficient(double) - Method in interface nxopen.motion.BodyContactAdams

Deprecated.

Deprecated in NX8.0.0. Obtion the exression using BodyContactAdams.staticCoefficientExpression() to query or edit it.

setStaticCoefficient(double) - Method in interface nxopen.motion.BodyContactRecurdyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using BodyContactRecurdyn.staticCoefficientExpression() to query or edit it.

setStaticCoefficient(double) - Method in interface nxopen.motion.CurveContactAdams

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using CurveContactAdams.staticCoefficientExpression() to query or edit it.

setStaticCoefficient(double) - Method in interface nxopen.motion.CurveContactRecurdyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using CurveContactRecurdyn.staticCoefficientExpression() to query or edit it.

setStaticEqu(boolean) - Method in interface nxopen.motion.JointFrictionAdams

Sets the static equ
License requirements: mechanisms ("MECHANISMS")
.

setStaticEqu(boolean) - Method in interface nxopen.motion.JointFrictionRecurDyn

Sets the static equ
License requirements: mechanisms ("MECHANISMS")
.

setStaticErrorTolerance(double) - Method in interface nxopen.motion.RecurdynSolverProperty

Deprecated.

Deprecated in NX8.5.0. Obtion the expression using RecurdynSolverProperty.dynamicNumericalDampingExpression() to query or edit it.

setStaticFinalGatherQuality(double) - Method in interface nxopen.display.GlobalIlluminationBuilder

License requirements: None.

setStaticFriction(double) - Method in interface nxopen.mechatronics.PreferencesBuilder

Deprecated.

Deprecated in NX9.0.0. This functionality is no longer supported.

setStaticHold(boolean) - Method in interface nxopen.motion.TirePropertyAdvancedParameters

License requirements: mechanisms ("MECHANISMS")
.

setStaticHold(boolean) - Method in interface nxopen.motion.TirePropertyCdBuilder

License requirements: mechanisms ("MECHANISMS")
.

setStaticHold(boolean) - Method in interface nxopen.motion.TirePropertyFtBuilder

License requirements: mechanisms ("MECHANISMS")
.

setStaticHold(boolean) - Method in interface nxopen.motion.TirePropertyNonInertialBuilder

License requirements: mechanisms ("MECHANISMS")
.

setStaticHold(boolean) - Method in interface nxopen.motion.TirePropertyTnoBuilder

License requirements: mechanisms ("MECHANISMS")
.

setStaticInitialStepSize(double) - Method in interface nxopen.motion.RecurdynSolverProperty

Deprecated.

Deprecated in NX8.5.0. Obtion the expression using RecurdynSolverProperty.staticInitialStepSizeExpression() to query or edit it.

setStaticIntegratorType(RecurdynSolverProperty.StaticIntegratorTypes) - Method in interface nxopen.motion.RecurdynSolverProperty

License requirements: mechanisms ("MECHANISMS")
.

setStaticJacobianType(int) - Method in interface nxopen.motion.LmsSolverProperty

License requirements: mechanisms ("MECHANISMS")
.

setStaticMaxIteration(int) - Method in interface nxopen.motion.RecurdynSolverProperty

License requirements: mechanisms ("MECHANISMS")
.

setStaticMaxStepSize(double) - Method in interface nxopen.motion.RecurdynSolverProperty

Deprecated.

Deprecated in NX8.5.0. Obtion the expression using RecurdynSolverProperty.staticMaxStepSizeExpression() to query or edit it.

setStaticOffset(NXObject) - Method in interface nxopen.cae.DurabilityTransientEventBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setStaticQuasiIteration(int) - Method in interface nxopen.motion.LmsSolverProperty

License requirements: mechanisms ("MECHANISMS")
.

setStaticRadius(double) - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setStaticRadius(double) - Method in interface nxopen.features.vehicledesign.BaseDataWheelBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setStaticRayTracedStudioQuality(RayTracedStudioEditorBuilder.StaticRayTracedStudioQualityType) - Method in interface nxopen.display.RayTracedStudioEditorBuilder

License requirements: None.

setStaticRayTracedStudioRenderDepth(int) - Method in interface nxopen.display.RayTracedStudioEditorBuilder

License requirements: None.

setStaticStability(double) - Method in interface nxopen.motion.RecurdynSolverProperty

Deprecated.

Deprecated in NX8.5.0. Obtion the expression using RecurdynSolverProperty.staticStabilityExpression() to query or edit it.

setStationaryAntialiasing(RayTracedStudioEditorBuilder.StationaryAntialiasingType) - Method in interface nxopen.display.RayTracedStudioEditorBuilder

License requirements: None.

setStationaryEntity(NXObject) - Method in interface nxopen.features.DraftBuilder

Deprecated.

Deprecated in NX8.5.0. Use Features.DraftBuilder#stationaryReference instead. Note that this API cannot be used together with the new API.

setStationaryEntity(NXObject) - Method in interface nxopen.features.sheetmetal.BendTaperBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setStationaryFace(Face) - Method in interface nxopen.features.sheetmetal.MigratedPanelBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setStationaryFinalGatherQuality(double) - Method in interface nxopen.display.GlobalIlluminationBuilder

License requirements: None.

setStationaryQuality(RayTracedStudioBuilder.StationaryDisplayQualityType) - Method in interface nxopen.display.RayTracedStudioBuilder

License requirements: None.

setStationaryRadius(AeroJoggleBuilder.SideType, String) - Method in interface nxopen.features.sheetmetal.AeroJoggleBuilder

Set the stationary radius expression.

setStationaryRadius(boolean, String) - Method in interface nxopen.preferences.PartSheetmetal

THE stationary radius
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setStationaryRayTracedStudioQuality(RayTracedStudioEditorBuilder.StationaryRayTracedStudioQualityType) - Method in interface nxopen.display.RayTracedStudioEditorBuilder

License requirements: None.

setStationaryRayTracedStudioshowStatusIndicator(boolean) - Method in interface nxopen.display.RayTracedStudioEditorBuilder

License requirements: None.

setStationDistance(double) - Method in interface nxopen.tooling.LayoutManagementBuilder

License requirements: None.

setStationEnum(LayoutManagementBuilder.StationItems) - Method in interface nxopen.tooling.LayoutManagementBuilder

License requirements: None.

setStationInformation(String) - Method in interface nxopen.tooling.StripLayoutStationInformationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setStationLocation(Point) - Method in interface nxopen.linedesigner.ConveyorStationFeatureBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setStationName(String) - Method in interface nxopen.linedesigner.ConveyorStationFeatureBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setStationNameStr(String) - Method in interface nxopen.tooling.LayoutManagementBuilder

License requirements: None.

setStationNumber(int) - Method in interface nxopen.tooling.LayoutManagementBuilder

License requirements: None.

setStationNumber(StripLayoutStationInformationBuilder.StationItem) - Method in interface nxopen.tooling.StripLayoutStationInformationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setStationsNo(int) - Method in interface nxopen.tooling.QuickQuotationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setStationType(ConveyorStationFeatureBuilder.Type) - Method in interface nxopen.linedesigner.ConveyorStationFeatureBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setStatisticalTolerance(boolean) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setStatisticalType(SearchCriteriaFeatureControlFrameBuilder.StatisticalOptions) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

License requirements: None.

setStatureData(HumanData.StatureType, double, HumanData.StatureUnitType) - Method in interface nxopen.features.HumanBuilder

Sets human stature data
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setStatus(BoundaryTurnMemberFineFinishOffset.StatusValue) - Method in interface nxopen.cam.BoundaryTurnMemberFineFinishOffset

License requirements: cam_base ("CAM BASE")
.

setStatus(boolean) - Method in interface nxopen.cam.ExtendAtEdges

License requirements: cam_base ("CAM BASE")
.

setStatus(boolean) - Method in interface nxopen.cam.InPathEventDataBuilder

License requirements: cam_base ("CAM BASE")
.

setStatus(MinCutDepth.Types) - Method in interface nxopen.cam.MinCutDepth

License requirements: cam_base ("CAM BASE")
.

setStatus(MinCutLength.Types) - Method in interface nxopen.cam.MinCutLength

License requirements: cam_base ("CAM BASE")
.

setStatus(String) - Method in interface nxopen.issue.IssueContent

License requirements: nx_issue_mgmt ("NX Issue Tracking")
.

setStatus(String) - Method in interface nxopen.issue.IssueContentBuilder

License requirements: nx_issue_mgmt ("NX Issue Tracking")
.

setStatus(int, int) - Method in interface nxopen.uf.UFLayer

Refer to UF_LAYER_set_status for documentation.

setStatus(Tag, int) - Method in interface nxopen.uf.UFPart

Refer to UF_PART_set_status for documentation.

setStatus(String) - Method in interface nxopen.uf.UFUi

Refer to UF_UI_set_status for documentation.

setStatus(Validation.Result) - Method in interface nxopen.validate.ResultObject

License requirements: None.

setStatusControl(WedmStatusControlCiBuilder.StatusTypes) - Method in interface nxopen.cam.WedmStatusControlCiBuilder

License requirements: cam_base ("CAM BASE")
.

setStatusOfPlatformCeilingHeightUpdation(boolean) - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setStatusOfPlatformElevationUpdation(boolean) - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setStatusOfPlatformHeightUpdation(boolean) - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setStatusOfPlatformSupportDefaultFromCeilingToggleUpdation(boolean) - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setStatusOfPlatformSupportOptionUpdation(boolean) - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setStatusOfPlatformThicknessUpdation(boolean) - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setStatusSendNcCommandMsg(UFVariant, boolean) - Method in interface nxopen.uf.UFSim

Refer to UF_SIM_set_status_send_nc_command_msg for documentation.

setStatusToRegenerate() - Method in interface nxopen.cam.UserDefinedOpr

Set operation status to regenerate
License requirements: None.

setSteelFeatureApproach(ShipCollection.SteelFeatureApproach) - Method in interface nxopen.features.ShipCollection

Enable sketch sharing
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setSteelFeatureType(String) - Method in interface nxopen.features.shipdesign.SteelFeatureSpreadsheetBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setSteepAreas(boolean) - Method in interface nxopen.cam.CleanupSettings

License requirements: cam_base ("CAM BASE")
.

setSteepBody(Body) - Method in interface nxopen.cam.SurfaceRegions

License requirements: cam_base ("CAM BASE")
.

setSteepCutDirection(FlowCutSteepContainment.SteepCutDirectionTypes) - Method in interface nxopen.cam.FlowCutSteepContainment

License requirements: cam_base ("CAM BASE")
.

setSteepestDescDVarStep(double) - Method in interface nxopen.cae.ModelUpdateOptimOptionsBuilder

License requirements: nx_correl_update ("FE Model Update")
.

setSteepestDescMaxInnerIter(int) - Method in interface nxopen.cae.ModelUpdateOptimOptionsBuilder

License requirements: nx_correl_update ("FE Model Update")
.

setSteepestDescMethod(ModelUpdateOptimOptionsBuilder.SteepestDescMethodChoice) - Method in interface nxopen.cae.ModelUpdateOptimOptionsBuilder

License requirements: nx_correl_update ("FE Model Update")
.

setSteepOverlapOption(boolean) - Method in interface nxopen.cam.DmAmBuilder

License requirements: cam_base ("CAM BASE")
.

setSteepOverlapType(DmAmBuilder.SteepOverlapOptTypes) - Method in interface nxopen.cam.DmAmBuilder

License requirements: cam_base ("CAM BASE")
.

setSteeringWheelCenterPoint(Point) - Method in interface nxopen.features.vehicledesign.BaseDataDriverBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSteeringWheelCenterPointActive(boolean) - Method in interface nxopen.features.vehicledesign.BaseDataDriverBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setStemTop(NXObject) - Method in interface nxopen.cam.InspectionProbeTrackingBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setStemTop(NXObject) - Method in interface nxopen.cam.ProbeTrackingBuilder

License requirements: None.

setStencilPreview(boolean) - Method in interface nxopen.display.DecalBuilder

License requirements: None.

setStep(double) - Method in interface nxopen.die.ThroatChildBuilder

Sets the step to be applied at the end of the tangent extension of the flange
License requirements: ug_die_design ("Die Design")
.

setStep(double) - Method in interface nxopen.die.ThroatParentBuilder

Sets the step to be applied at the end of the tangential extension of the flange
License requirements: ug_die_design ("Die Design")
.

setStep(int) - Method in interface nxopen.motion.MotionSolutionBuilder

License requirements: mechanisms ("MECHANISMS")
.

setStepAngle(double) - Method in interface nxopen.features.SectionCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setStepBannerBitmaps(String[]) - Method in interface nxopen.blockstyler.Wizard

Sets the StepBannerBitmaps.

setStepBitmaps(String[]) - Method in interface nxopen.blockstyler.Wizard

Sets the StepBitmaps.

setStepClearance(double) - Method in interface nxopen.cam.Cycle

License requirements: cam_base ("CAM BASE")
.

setStepClearanceStatus(boolean) - Method in interface nxopen.cam.Cycle

License requirements: cam_base ("CAM BASE")
.

setStepCount(MeshTransformerBuilder.StepCountValue) - Method in interface nxopen.features.MeshTransformerBuilder

License requirements: None.

setStepCues(String[]) - Method in interface nxopen.blockstyler.Wizard

Sets the StepCues.

setStepDistance(String) - Method in interface nxopen.die.ThroatChildBuilder

License requirements: ug_die_design ("Die Design")
.

setStepDistance(double) - Method in interface nxopen.features.SectionCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setStepFaceMethod1(StepBuilder.StepFaceMethods) - Method in interface nxopen.features.StepBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setStepFaceMethod2(StepBuilder.StepFaceMethods) - Method in interface nxopen.features.StepBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setStepIncrement(Tag, int) - Method in interface nxopen.uf.UFAssem

Refer to UF_ASSEM_set_step_increment for documentation.

setStepMethod(DPMItpBuilder.StepMethodOption) - Method in interface nxopen.cam.DPMItpBuilder

Deprecated.

Deprecated in NX10.0.1. Use DmStreamlineCutStep.cutStepType() and DmStreamlineCutStep.setCutStepType(nxopen.cam.DPMItpBuilder.StepMethodOption) instead.

setStepMethod(MultiDepthCut.Types) - Method in interface nxopen.cam.MultiDepthCut

License requirements: cam_base ("CAM BASE")
.

setStepMethod1(ShelfBuilder.StepMethod) - Method in interface nxopen.features.ShelfBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setStepMethod2(ShelfBuilder.StepMethod) - Method in interface nxopen.features.ShelfBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setStepNotifyPostHandler(Wizard.StepNotifyPostCallback) - Method in interface nxopen.blockstyler.Wizard

Sets the StepNotifyPost handler.

setStepNotifyPreHandler(Wizard.StepNotifyPreCallback) - Method in interface nxopen.blockstyler.Wizard

Sets the StepNotifyPre handler.

setStepOption(boolean) - Method in interface nxopen.features.OffsetSurfaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setStepOption(StepOptionBehavior.StepOptionType) - Method in interface nxopen.geometricutilities.StepOptionBehavior

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setStepover(NXColor) - Method in interface nxopen.cam.PathDisplayColors

License requirements: cam_base ("CAM BASE")
.

setStepoverDis(double) - Method in interface nxopen.cam.DPMItpBuilder

License requirements: cam_base ("CAM BASE")
.

setStepoverNum(int) - Method in interface nxopen.cam.DPMItpBuilder

License requirements: cam_base ("CAM BASE")
.

setStepoverScallopHeight(double) - Method in interface nxopen.cam.DPMItpBuilder

License requirements: cam_base ("CAM BASE")
.

setStepoverType(DPMItpBuilder.StepoverTypeOption) - Method in interface nxopen.cam.DPMItpBuilder

License requirements: cam_base ("CAM BASE")
.

setStepoverType(StepoverBuilder.StepoverTypes) - Method in interface nxopen.cam.StepoverBuilder

License requirements: cam_base ("CAM BASE")
.

setStepoverTypeType(StepoverBuilder.StepoverTypes) - Method in interface nxopen.cam.WedmStepoverBuilder

License requirements: cam_base ("CAM BASE")
.

setStepSize(double) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setStepSize(double) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setStepSize(double) - Method in interface nxopen.die.SpringbackCompensationBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR nx_freeform_2 ("advanced freeform modeling")
.

setStepStatusAsString(String) - Method in interface nxopen.blockstyler.BodyCollector

License requirements: None.

setStepStatusAsString(String) - Method in interface nxopen.blockstyler.CurveCollector

License requirements: None.

setStepStatusAsString(String) - Method in interface nxopen.blockstyler.FaceCollector

License requirements: None.

setStepStatusAsString(String) - Method in interface nxopen.blockstyler.SectionBuilder

License requirements: None.

setStepStatusAsString(String) - Method in interface nxopen.blockstyler.SelectElement

License requirements: None.

setStepStatusAsString(String) - Method in interface nxopen.blockstyler.SelectFeature

License requirements: None.

setStepStatusAsString(String) - Method in interface nxopen.blockstyler.SelectNode

License requirements: None.

setStepStatusAsString(String) - Method in interface nxopen.blockstyler.SelectObject

License requirements: None.

setStepStatusAsString(String) - Method in interface nxopen.blockstyler.SpecifyAxis

License requirements: None.

setStepStatusAsString(String) - Method in interface nxopen.blockstyler.SpecifyCSYS

License requirements: None.

setStepStatusAsString(String) - Method in interface nxopen.blockstyler.SpecifyLocation

License requirements: None.

setStepStatusAsString(String) - Method in interface nxopen.blockstyler.SpecifyPlane

License requirements: None.

setStepStatusAsString(String) - Method in interface nxopen.blockstyler.SpecifyPoint

License requirements: None.

setStepStatusAsString(String) - Method in interface nxopen.blockstyler.SpecifyVector

License requirements: None.

setStepStatusAsString(String) - Method in interface nxopen.blockstyler.SuperPoint

License requirements: None.

setStepStatusAsString(String) - Method in interface nxopen.blockstyler.SuperSection

License requirements: None.

setStepText(String[]) - Method in interface nxopen.blockstyler.Wizard

Sets the StepText.

setStepTime(double) - Method in interface nxopen.mechatronics.PreferencesBuilder

Deprecated.

Deprecated in NX9.0.0. This functionality is no longer supported.

setStepType(StepBuilder.StepTypes) - Method in interface nxopen.features.StepBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setStepValue(double) - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setStepWallMethod1(StepBuilder.StepWallMethods) - Method in interface nxopen.features.StepBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setStepWallMethod2(StepBuilder.StepWallMethods) - Method in interface nxopen.features.StepBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setStickCollision(boolean) - Method in interface nxopen.mechatronics.CollisionBodyBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setStickyFactor(double) - Method in interface nxopen.mechatronics.PreferencesBuilder

Deprecated.

Deprecated in NX11.0.0. This functionality is no longer supported.

setStictionTransitionVelocity(double) - Method in interface nxopen.motion.JointFrictionAdams

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using Motion.JointFrictionAdams#stictionTransitionVelocityExpression to query or edit it.

setStictionTransitionVelocity(double) - Method in interface nxopen.motion.JointFrictionRecurDyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using Motion.JointFrictionRecurDyn#stictionTransitionVelocityExpression to query or edit it.

setStictionVelocity(double) - Method in interface nxopen.motion.BodyContactAdams

Deprecated.

Deprecated in NX8.0.0. Obtion the exression using BodyContactAdams.stictionVelocityExpression() to query or edit it.

setStictionVelocity(double) - Method in interface nxopen.motion.BodyContactRecurdyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using BodyContactRecurdyn.stictionVelocityExpression() to query or edit it.

setStiffenerBySupportMethod(StiffenerBySupportPathBuilder.Method) - Method in interface nxopen.features.shipdesign.StiffenerBySupportPathBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setStiffness(double) - Method in interface nxopen.motion.BodyContactAdams

Deprecated.

Deprecated in NX8.0.0. Obtion the exression using BodyContactAdams.stiffnessExpression() to query or edit it.

setStiffness(double) - Method in interface nxopen.motion.BodyContactRecurdyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using BodyContactRecurdyn.stiffnessExpression() to query or edit it.

setStiffness(double) - Method in interface nxopen.motion.CurveContactAdams

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using CurveContactAdams.stiffnessExpression() to query or edit it.

setStiffness(double) - Method in interface nxopen.motion.CurveContactRecurdyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using CurveContactRecurdyn.stiffnessExpression() to query or edit it.

setStiffness(double) - Method in interface nxopen.motion.SpringBuilder

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using Motion.SpringBuilder#stiffness and Motion.SpringBuilder#torsionalStiffnessExpression to query or edit it.

setStiffnessFunction(Function) - Method in interface nxopen.motion.SpringBuilder

License requirements: mechanisms ("MECHANISMS")
.

setStiffnessState(SpringEADBuilder.State) - Method in interface nxopen.cae.SpringEADBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setStiffnessType(ConnectorCoefficientTypes) - Method in interface nxopen.motion.SpringBuilder

License requirements: mechanisms ("MECHANISMS")
.

setStitchMethod(EdgeSticherBuilder.StitchMethods) - Method in interface nxopen.cae.EdgeSticherBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setStitchOption(EdgeSticherBuilder.StitchOptions) - Method in interface nxopen.cae.EdgeSticherBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setStitchOption(boolean) - Method in interface nxopen.cae.FaceFaceImprintBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setStitchToggle(boolean) - Method in interface nxopen.cae.EdgeFaceImprintBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setStitchToggle(boolean) - Method in interface nxopen.cae.ImprintBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setSTLFileUnits(STLImportBuilder.STLFileUnitsTypes) - Method in interface nxopen.facet.STLImportBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setStock(double) - Method in interface nxopen.cam.BoundaryMillingMemberSet

License requirements: cam_base ("CAM BASE")
.

setStock(double) - Method in interface nxopen.cam.BoundaryMillingSet

License requirements: cam_base ("CAM BASE")
.

setStock(double) - Method in interface nxopen.cam.BoundaryTurnSet

License requirements: cam_base ("CAM BASE")
.

setStock(double) - Method in interface nxopen.cam.TurnRoughFinishTestCut

License requirements: cam_base ("CAM BASE")
.

setStock(Stock) - Method in interface nxopen.routing.RouteSweptFoldBuilder

Sets the value of stock, stock width and stock thickness to the builder.

setStockAllowance(double) - Method in interface nxopen.cam.ProbeStockParametersBuilder

License requirements: None.

setStockAnchor(String) - Method in interface nxopen.mechanicalrouting.StockBuilder

Sets
License requirements: routing_base ("Routing Basic")
.

setStockAnchor(String) - Method in interface nxopen.preferences.RoutingStock

Sets the Anchor name associated with the stock preferences.

setStockAnchor(String) - Method in interface nxopen.routing.OverstockBuilder

Sets the Anchor name associated with the overstock.

setStockAnchor(String) - Method in interface nxopen.routing.StockBuilder

Sets the Anchor name associated with the stock.

setStockData(StockData) - Method in interface nxopen.routing.Stock

Sets the StockData .

setStockDefinition(StockDefinition) - Method in interface nxopen.routing.StockDevice

Sets the stock definition.

setStockFolder(String) - Method in interface nxopen.preferences.RoutingStock

Sets the default folder for stock components
License requirements: routing_base ("Routing Basic")
.

setStockLength(BillOfMaterialBuilder.StockLengthType) - Method in interface nxopen.annotations.BillOfMaterialBuilder

License requirements: routing_base ("Routing Basic")
.

setStockLength(double) - Method in interface nxopen.routing.StockDevice

Sets the stock length.

setStockLengthDisplayFlag(RoutingPart.StockLengthDisplay) - Method in interface nxopen.preferences.RoutingPart

Sets the stock length display for the Routing bill of material.

setStockLensType(CameraBuilder.StockLens) - Method in interface nxopen.display.CameraBuilder

License requirements: None.

setStockList(Stock[]) - Method in interface nxopen.routing.AssignCornerBuilder

Set the Stock object list when list box is updated.

setStockList(Stock[]) - Method in interface nxopen.routing.CopeCornerBuilder

Deprecated.

Deprecated in NX8.0.0. Use AssignCornerBuilder instead.

setStockMode(TurnRoughFinishTestCut.StockModeTypes) - Method in interface nxopen.cam.TurnRoughFinishTestCut

License requirements: cam_base ("CAM BASE")
.

setStockMode(RoutingStock.StockModeFlag) - Method in interface nxopen.preferences.RoutingStock

Sets the stock creation mode
License requirements: routing_base ("Routing Basic")
.

setStockOffsetExpression(String) - Method in interface nxopen.preferences.RoutingPath

License requirements: routing_base ("Routing Basic")
.

setStockPartName(Tag, String) - Method in interface nxopen.uf.UFRoute

Refer to UF_ROUTE_set_stock_part_name for documentation.

setStockPieceCount(boolean) - Method in interface nxopen.annotations.BillOfMaterialBuilder

License requirements: routing_base ("Routing Basic")
.

setStockSetting(SimulationOptionsBuilder.StockType) - Method in interface nxopen.cam.SimulationOptionsBuilder

License requirements: cam_base ("CAM BASE")
.

setStockSettings(PathStockBuilder) - Method in interface nxopen.routing.FillerStockBuilder

Sets the stock settings for creating filler stock.

setStockSettings(PathStockBuilder) - Method in interface nxopen.routing.OverstockBuilder

Sets the stock settings for overstock assignment.

setStockSettings(PathStockBuilder) - Method in interface nxopen.routing.StockBuilder

Sets the stock settings for stock assignment.

setStockSettings(PathStockBuilder) - Method in interface nxopen.routing.StockTransitionBuilder

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setStockStyle(StockStyle) - Method in interface nxopen.routing.Stock

Sets the StockStyle of the Stock .

setStockStyle(StockBuilder.StockStyleType) - Method in interface nxopen.routing.StockBuilder

Sets the stock style of the stock to assign
License requirements: routing_base ("Routing Basic")
.

setStockStyle(int, int, Tag[]) - Method in interface nxopen.uf.UFRoute

Refer to UF_ROUTE_set_stock_style for documentation.

setStockSubType(PathStockPreferenceBuilder.AssignStockSubType) - Method in interface nxopen.mechanicalrouting.PathStockPreferenceBuilder

Sets the type of stock being assigned.

setStockTransitionProperties() - Method in interface nxopen.routing.StockTransitionBuilder

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setStockType(PathStockPreferenceBuilder.AssignStockType) - Method in interface nxopen.mechanicalrouting.PathStockPreferenceBuilder

Sets the type of stock being assigned.

setStockType(PathStockBuilder.AssignStockType) - Method in interface nxopen.routing.PathStockBuilder

Sets the type of stock being assigned.

setStockType(StockSizeBuilder.Shape) - Method in interface nxopen.tooling.StockSizeBuilder

Deprecated.

Deprecated in NX10.0.0. This functionality is no longer supported.

setStockValue(double) - Method in interface nxopen.cam.SimulationOptionsBuilder

License requirements: cam_base ("CAM BASE")
.

setStopActive(boolean) - Method in interface nxopen.cam.ManualControlBuilder

License requirements: cam_base ("CAM BASE")
.

setStopAtIntersection(boolean) - Method in interface nxopen.blockstyler.SectionBuilder

License requirements: None.

setStopAtIntersection(boolean) - Method in interface nxopen.blockstyler.SuperSection

License requirements: None.

setStopCheckCollision(boolean) - Method in interface nxopen.tooling.RunSimulationBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setStopCheckConstantStock(double) - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder

License requirements: cam_base ("CAM BASE")
.

setStopCheckFaceStock(double) - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder

License requirements: cam_base ("CAM BASE")
.

setStopCheckRadialStock(double) - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder

License requirements: cam_base ("CAM BASE")
.

setStopDistance(double) - Method in interface nxopen.cam.TurnRoughFinishTestCut

License requirements: cam_base ("CAM BASE")
.

setStopLimit(int) - Method in interface nxopen.cam.CutDepthChecker

License requirements: cam_base ("CAM BASE")
.

setStopOnCollision(boolean) - Method in interface nxopen.cam.SimulationOptionsBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setStopOnError(boolean) - Method in interface nxopen.validate.ValidatorOptions

License requirements: None.

setStopOnEvent(boolean) - Method in interface nxopen.motion.PackagingInterferenceBuilder

Sets the Stop_On_Event flag of PackagingInterference object
License requirements: mechanisms ("MECHANISMS")

Created in NX4.0.0

setStopOnEvent(boolean) - Method in interface nxopen.motion.PackagingMeasureBuilder

Sets the Stop_On_Event flag of PackagingMeasure object
License requirements: mechanisms ("MECHANISMS")

Created in NX4.0.0

setStopOnEventOption(boolean) - Method in interface nxopen.motion.PostProcess

Set articulation stop on event option animation/articulation/spreadsheet run
License requirements: mechanisms ("MECHANISMS")
.

setStopOnHistoryBuffer(boolean) - Method in interface nxopen.cam.SimulationOptionsBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setStopOnLimit(boolean) - Method in interface nxopen.cam.CutDepthChecker

License requirements: cam_base ("CAM BASE")
.

setStopOnLimitViolation(boolean) - Method in interface nxopen.cam.SimulationOptionsBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setStopOnRapidThroughIpw(boolean) - Method in interface nxopen.cam.SimulationOptionsBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setStopOnWarning(boolean) - Method in interface nxopen.validate.ValidatorOptions

License requirements: None.

setStopPercentage(double) - Method in interface nxopen.cam.TurnRoughFinishTestCut

License requirements: cam_base ("CAM BASE")
.

setStopPoint(Point) - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder

License requirements: cam_base ("CAM BASE")
.

setStopPoint(Point) - Method in interface nxopen.cam.TurnRoughFinishTestCut

License requirements: cam_base ("CAM BASE")
.

setStopPointDistance(double) - Method in interface nxopen.cam.WedmBasedGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setStopPointFlag(int) - Method in interface nxopen.cam.WedmBasedGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setStopPointFlag(WedmGeomBuilder.StopPointFlagTypes) - Method in interface nxopen.cam.WedmGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setStopPointFlag(WedmOperationBuilder.StopPointFlagTypes) - Method in interface nxopen.cam.WedmOperationBuilder

License requirements: cam_base ("CAM BASE")
.

setStopPointType(int) - Method in interface nxopen.cam.WedmBasedGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setStopPointType(WedmGeomBuilder.StopPointTypes) - Method in interface nxopen.cam.WedmGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setStopPointType(WedmOperationBuilder.StopPointTypes) - Method in interface nxopen.cam.WedmOperationBuilder

License requirements: cam_base ("CAM BASE")
.

setStopPosition(TurnRoughFinishTestCut.StopPositionTypes) - Method in interface nxopen.cam.TurnRoughFinishTestCut

License requirements: cam_base ("CAM BASE")
.

setStopPositionMethod(TeachmodeProfileMoveBuilder.StartStopPositionMethods) - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder

License requirements: cam_base ("CAM BASE")
.

setStopRadius(double) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setStopWhenLimitReached(boolean) - Method in interface nxopen.cam.GougeCheckBuilder

License requirements: cam_base ("CAM BASE")
.

setStopWhenLimitReachedMaximumLimit(int) - Method in interface nxopen.cam.GougeCheckBuilder

License requirements: cam_base ("CAM BASE")
.

setStoreColor(boolean) - Method in interface nxopen.features.ColorFeatureBuilder

License requirements: None.

setStoreEnable(boolean) - Method in interface nxopen.motion.GraphBuilder

Deprecated.

Deprecated in NX11.0.0. Use Motion.GraphObjectBuilder instead.

setStoreLogFileInTeamCenter(boolean) - Method in interface nxopen.drawings.ConversionProcessSettingsBuilder

License requirements: convert_to_pmi (" Convert To PMI"), drafting ("DRAFTING")
.

setStoreModelViewPreview(boolean) - Method in interface nxopen.PreviewPropertiesBuilder

License requirements: None.

setStoreOption(boolean) - Method in interface nxopen.cae.responsesimulation.FunctionEvaluationOutputSettings

License requirements: nx_response_anlys ("NX Response Analysis")
.

setStorePartPreview(boolean) - Method in interface nxopen.PreviewPropertiesBuilder

License requirements: None.

setStrainType(LsdynaFormAnalysisResultDisplayBuilder.StrainTypeName) - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setStrakingSplitSystem(boolean) - Method in interface nxopen.features.shipdesign.SeamBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setStrAnnot(String) - Method in interface nxopen.formboard.FaceAnnotationBuilder

License requirements: routing_harness ("Routing Harness")
.

setStrAnnotFileName(String) - Method in interface nxopen.formboard.FaceAnnotationBuilder

License requirements: routing_harness ("Routing Harness")
.

setStrategy(TBSOptimizationSolutionBuilder.StrategyType) - Method in interface nxopen.cae.optimization.TBSOptimizationSolutionBuilder

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setStreamIO(int) - Method in interface nxopen.mechatronics.MATLABSignalConnectionBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setStreamIO(SHMSignalConnectionBuilder.StreamIOType) - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setStreamIO(int) - Method in interface nxopen.mechatronics.SignalConnectionBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setStreamOption(ExternalConnectionElementBuilder.StreamType) - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setStrength(DurabilityStrength) - Method in interface nxopen.cae.DurabilityEventBuilder

The event strength settings stored inside the event.

setStrengthRatio(boolean) - Method in interface nxopen.cae.LaminateGraphicalReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setStrengthRatio(boolean) - Method in interface nxopen.cae.LaminateQuickReportBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setStrengthRatio(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setStrengthRatioRule(LaminateGraphicalReportBuilder.EnvelopeRule) - Method in interface nxopen.cae.LaminateGraphicalReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setStrengthRatioRule(LaminateQuickReportBuilder.EnvelopeRule) - Method in interface nxopen.cae.LaminateQuickReportBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setStrengthRatioRule(LaminateSpreadsheetReportBuilder.EnvelopeRule) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setStrengthSafetyFactor(boolean) - Method in interface nxopen.cae.DurabilityEventStrengthSettingsBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setStrengthSafetyFactor(boolean) - Method in interface nxopen.cae.DurabilityResultsReportBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setStressAxisDirectionSearchMethod(DurabilityStressAxesBuilder.StressAxisDirectionSearchMethodEnum) - Method in interface nxopen.cae.DurabilityStressAxesBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setStressAxisMethod(DurabilityStressAxesBuilder.StressAxisMethodEnum) - Method in interface nxopen.cae.DurabilityStressAxesBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setStressCriteriaType(StrengthStressCriteria) - Method in interface nxopen.cae.responsesimulation.StrengthResultsEvaluationSettingBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setStressCriterion(DurabilityEventStrengthSettingsBuilder.StressCriterionEnum) - Method in interface nxopen.cae.DurabilityEventStrengthSettingsBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setStressDirection(Direction) - Method in interface nxopen.cae.DurabilityStressAxesBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setStressOptionType(StrengthStressOption) - Method in interface nxopen.cae.responsesimulation.StrengthResultsEvaluationSettingBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setStressType(DurabilityEventStrengthSettingsBuilder.StressTypeEnum) - Method in interface nxopen.cae.DurabilityEventStrengthSettingsBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setStressType(LsdynaFormAnalysisResultDisplayBuilder.StressTypeName) - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setStretchDirection(Direction) - Method in interface nxopen.features.GlobalShapingBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setStretchDirection(Direction) - Method in interface nxopen.features.OvercrownBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setString(String, String) - Method in interface nxopen.blockstyler.PropertyList

Sets the string value for the given property name.

setString(int, int, String) - Method in interface nxopen.ITableEditorDataProvider

Sets string data at a particular location in the table.

setString(int[], int, String) - Method in interface nxopen.ITableEditorDataProvider

Sets string data on a range of table cells in a specified column.

setString(String, String) - Method in interface nxopen.PropertyContainer

Sets the string value for the given property name.

setString(int, int, SpreadsheetCellData, int) - Method in interface nxopen.Spreadsheet

Sets the string in the cell.

setString(UFVariant, String, String) - Method in interface nxopen.uf.UFMom

Refer to UF_MOM_set_string for documentation.

setString(UFVariant, String, String) - Method in interface nxopen.uf.UFUde

Refer to UF_UDE_set_string for documentation.

setStringArray(UFVariant, String, int, String[]) - Method in interface nxopen.uf.UFMom

Refer to UF_MOM_set_string_array for documentation.

setStringArrayValue(String, String[]) - Method in interface nxopen.cam.CAMObject

Set string array to the parameter index for the object
License requirements: cam_base ("CAM BASE")
.

setStringDatumFeatName(String) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setStringDatumLetter(String) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setStringFeatureName1(String) - Method in interface nxopen.cam.InspectionOutputOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setStringFeatureName2(String) - Method in interface nxopen.cam.InspectionOutputOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setStringFilterRule(String) - Method in interface nxopen.tooling.AssemblyDrawingBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setStringLimit1(String) - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setStringLimit2(String) - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setStringList(String[]) - Method in interface nxopen.AttributeTemplatesBuilder

Sets the string list.

setStringNameRule(String) - Method in interface nxopen.tooling.AssemblyDrawingBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setStringOriginFeatName(String) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setStringPrefixI(String) - Method in interface nxopen.annotations.CoordinateNoteBuilder

License requirements: None.

setStringPrefixJ(String) - Method in interface nxopen.annotations.CoordinateNoteBuilder

License requirements: None.

setStringPrefixK(String) - Method in interface nxopen.annotations.CoordinateNoteBuilder

License requirements: None.

setStringPrefixLabel(String) - Method in interface nxopen.annotations.CoordinateNoteBuilder

License requirements: None.

setStringPrefixLevel(String) - Method in interface nxopen.annotations.CoordinateNoteBuilder

License requirements: None.

setStringPrefixX(String) - Method in interface nxopen.annotations.CoordinateNoteBuilder

License requirements: None.

setStringPrefixY(String) - Method in interface nxopen.annotations.CoordinateNoteBuilder

License requirements: None.

setStringPrefixZ(String) - Method in interface nxopen.annotations.CoordinateNoteBuilder

License requirements: None.

setStringPriDatum(String) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setStringPriDatum1(String) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setStringPropertyValue(String, String) - Method in interface nxopen.BasePropertyTable

Sets the string value of the property
License requirements: None.

setStrings(String, String[]) - Method in interface nxopen.blockstyler.PropertyList

Sets the strings value for the given property name.

setStrings(String[]) - Method in interface nxopen.features.UserDefinedFeatureApplicationField

Sets all of the strings in this field
License requirements: None.

setStrings(String, String[]) - Method in interface nxopen.PropertyContainer

Sets the strings value for the given property name.

setStrings(String[]) - Method in interface nxopen.userdefinedobjects.UserDefinedObject

Sets all of the strings stored with this UDO
License requirements: None.

setStrings(int, int, String[]) - Method in interface nxopen.userdefinedobjects.UserDefinedObject

Replaces the strings stored with this UDO in the specified range with a new array of strings
License requirements: None.

setStringSecDatum(String) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setStringSecDatum1(String) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setStringSheetName(String) - Method in interface nxopen.tooling.AssemblyDrawingBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setStringStock(String) - Method in interface nxopen.tooling.StockSizeBuilder

License requirements: None.

setStringSuffixI(String) - Method in interface nxopen.annotations.CoordinateNoteBuilder

License requirements: None.

setStringSuffixJ(String) - Method in interface nxopen.annotations.CoordinateNoteBuilder

License requirements: None.

setStringSuffixK(String) - Method in interface nxopen.annotations.CoordinateNoteBuilder

License requirements: None.

setStringSuffixLabel(String) - Method in interface nxopen.annotations.CoordinateNoteBuilder

License requirements: None.

setStringSuffixLevel(String) - Method in interface nxopen.annotations.CoordinateNoteBuilder

License requirements: None.

setStringSuffixX(String) - Method in interface nxopen.annotations.CoordinateNoteBuilder

License requirements: None.

setStringSuffixY(String) - Method in interface nxopen.annotations.CoordinateNoteBuilder

License requirements: None.

setStringSuffixZ(String) - Method in interface nxopen.annotations.CoordinateNoteBuilder

License requirements: None.

setStringTerDatum(String) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setStringTerDatum1(String) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setStringText(String[]) - Method in interface nxopen.annotations.CompanyProprietaryInformationBuilder

Sets the str text
License requirements: None.

setStringText(String[]) - Method in interface nxopen.annotations.ExportControlBuilder

Sets the str text
License requirements: None.

setStringText(String[]) - Method in interface nxopen.annotations.GovernmentSecurityInformationBuilder

Sets the str text
License requirements: None.

setStringText(String) - Method in interface nxopen.cam.UdeParameter

License requirements: cam_base ("CAM BASE")
.

setStringTimeUserAttribute(Tag, String, int, String, boolean) - Method in interface nxopen.uf.UFAttr

Refer to UF_ATTR_set_string_time_user_attribute for documentation.

setStringTolerancedFeat(String) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setStringTolName(String) - Method in interface nxopen.cam.InspectionOutputOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setStringTolName(String) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setStringToReplace(String) - Method in interface nxopen.pdm.PartOperationImportBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setStringUgAttribute(UFVariant, String, String) - Method in interface nxopen.uf.UFMfm

Refer to UF_MFM_set_string_ug_attribute for documentation.

setStringUserAttribute(Tag, String, int, String, boolean) - Method in interface nxopen.uf.UFAttr

Refer to UF_ATTR_set_string_user_attribute for documentation.

setStringValue(String) - Method in interface nxopen.annotations.PmiAttributeValueStringBuilder

License requirements: None.

setStringValue(String) - Method in interface nxopen.annotations.PmiStringBuilder

License requirements: None.

setStringValue(String) - Method in interface nxopen.AttributePropertiesBaseBuilder

License requirements: None.

setStringValue(String) - Method in interface nxopen.cam.CAMAttribute

Get the feature attribute string value for a string type attribute
License requirements: cam_base ("CAM BASE"), cam_base ("CAM BASE")
.

setStringValue(String, String) - Method in interface nxopen.cam.CAMObject

Set a string value to the parameter index for the object.

setStringValue(String, String) - Method in interface nxopen.cam.Cycle

Set the string value of the parameter
License requirements: cam_base ("CAM BASE")
.

setStringValue(String) - Method in interface nxopen.cam.UdeParameter

Deprecated.

Deprecated in NX8.0.0. Use CAM.UdeParameter#stringText and CAM.UdeParameter#setStringText instead.

setStringValue(String) - Method in interface nxopen.pdm.EffectivityAttributePropertiesBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setStringValue(String) - Method in interface nxopen.SpreadsheetCellData

License requirements: None.

setStringValueOfAttribute(UFVariant, String, String) - Method in interface nxopen.uf.UFMfm

Refer to UF_MFM_set_string_value_of_attribute for documentation.

setStripLength(double) - Method in interface nxopen.tooling.QuickQuotationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setStripMaterial(String) - Method in interface nxopen.tooling.QuickQuotationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setStripperPlateClearance(double) - Method in interface nxopen.tooling.BendInsertDesignBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setStripperPlateClearance(double) - Method in interface nxopen.tooling.FormingInsertBuilder

License requirements: None.

setStripperPlateClearance(double) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder

License requirements: None.

setStripThickness(double) - Method in interface nxopen.tooling.QuickQuotationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setStripTravelDistance(double) - Method in interface nxopen.tooling.DieBaseBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setStripVector(Direction) - Method in interface nxopen.tooling.MotionSimulationBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setStripWidthResult(double) - Method in interface nxopen.tooling.BlankNestingBuilder

License requirements: None.

setStrokePerMinute(double) - Method in interface nxopen.tooling.MotionSimulationBuilder

License requirements: None.

setStrokesPerMinute(double) - Method in interface nxopen.tooling.SetPressModelBuilder

License requirements: nx_dievalidation ("DIE VALIDATION")
.

setStructures(boolean) - Method in interface nxopen.ObjectTypeSelector

License requirements: None.

setStrValue(Tag, int, String) - Method in interface nxopen.uf.UFParam

Refer to UF_PARAM_set_str_value for documentation.

setStubLength(double) - Method in interface nxopen.annotations.LineAndArrowPreferences

Sets the stub length
License requirements: None.

setStubLength(double) - Method in interface nxopen.annotations.LineArrowStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setStubLength(double) - Method in interface nxopen.drawings.SectionLineStyleBuilder

Deprecated.

Deprecated in NX10.0.0. Use ViewSectionLineBuilder.setOverhang(double) instead.

setStubSide(LeaderSide) - Method in interface nxopen.annotations.LeaderData

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setStubSize(double) - Method in interface nxopen.annotations.LeaderData

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setStubSymbolType(StubSymbolType) - Method in interface nxopen.annotations.LineArrowStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setStubType(ChamferStubType) - Method in interface nxopen.annotations.ChamferDimensionPreferences

Sets the stub type
License requirements: None.

setStudyName(String) - Method in interface nxopen.optimization.DesignStudyBuilder

License requirements: None.

setStudyName(String) - Method in interface nxopen.optimization.OptimizationBuilder

License requirements: None.

setStyle(ViewSectionLineBuilder.StyleType) - Method in interface nxopen.drawings.ViewSectionLineBuilder

License requirements: drafting ("DRAFTING")
.

setStyle(CurveCurvatureAnalysisBuilder.DisplayStyle) - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder

License requirements: None.

setStyle(StockStyle) - Method in interface nxopen.routing.CrossSection

License requirements: routing_base ("Routing Basic")
.

setSubAssembly(boolean) - Method in interface nxopen.tooling.ValidCheckBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSubcase(int) - Method in interface nxopen.cae.DurabilityRandomEventBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setSubcase(int) - Method in interface nxopen.cae.DurabilityTransientEventBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setSubcase(SimSolutionStep) - Method in interface nxopen.cae.MechanicalLoadSumBuilder

The subcase object
License requirements: nx_masterfem ("Finite Element Modeling")
.

setSubcase(boolean, int) - Method in interface nxopen.cae.optimization.TBSLoadCase

Sets the load cases
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setSubcategory(String) - Method in interface nxopen.PhysicalMaterial

Sets the material sub-category
License requirements: None.

setSubComponent(boolean) - Method in interface nxopen.features.shipdesign.SteelDistributionBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setSubdivideNumSegments(int) - Method in interface nxopen.routing.SubdivideSegmentBuilder

License requirements: routing_base ("Routing Basic")
.

setSubdivideRegion(boolean) - Method in interface nxopen.weld.WeldFillBuilder

License requirements: ugweld ("UG WELD")
.

setSubdivisionMethod(SubdivideFacetBodyBuilder.SubdivisionMethodType) - Method in interface nxopen.facet.SubdivideFacetBodyBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setSubFeat1Filter(boolean) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSubFeat1Name(String) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSubFeat1StateEnum(InspectionConstructedFeatureBuilder.SubFeat1StateType) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSubFeat2Filter(boolean) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSubFeat2Name(String) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSubFeat2StateEnum(InspectionConstructedFeatureBuilder.SubFeat2StateType) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSubFeatures(String[]) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder

Set the current subfeatures
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSubFeatures(String[]) - Method in interface nxopen.cam.InspectionPatternFeatureBuilder

Sets the current subfeatures.

setSubFeatureStates(InspectionConstructedFeatureBuilder.CurrentStateType[]) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder

Set the current subfeature states.

setSubGraphInStack(int) - Method in interface nxopen.cae.xyplot.OverlayParameters

License requirements: nx_ftk ("NX Advanced Graphing")
.

setSubMenu(int, TreeListMenu) - Method in interface nxopen.blockstyler.TreeListMenu

Sets a submenu.

setSubmitOptions(DurabilityEventSolverBuilder.SubmitOptionsEnum) - Method in interface nxopen.cae.DurabilityEventSolverBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setSubmitOptions(DurabilitySolverBuilder.SubmitOptionsEnum) - Method in interface nxopen.cae.DurabilitySolverBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setSubobjPtrValue(Tag, int, UFVariant) - Method in interface nxopen.uf.UFParam

Refer to UF_PARAM_set_subobj_ptr_value for documentation.

setSubopLabel(String) - Method in interface nxopen.cam.MoveBuilder

License requirements: None.

setSubRegion(boolean) - Method in interface nxopen.preferences.SessionVisualizationHighQualityImage

Sets the setting for whether the High Quality Image is generated from a sub-region.

setSubscript(String) - Method in interface nxopen.annotations.LocatorDesignatorBuilder

License requirements: None.

setSubscriptSizeFactor(double) - Method in interface nxopen.drawings.ViewCommonViewLabelBuilder

License requirements: drafting ("DRAFTING")
.

setSubsetDescription(String) - Method in interface nxopen.assemblies.SubsetBuilder

Deprecated.

Deprecated in NX11.0.0. Use LogicalObject properties instead.

setSubsetName(String) - Method in interface nxopen.assemblies.SubsetBuilder

Deprecated.

Deprecated in NX11.0.0. Use LogicalObject properties instead.

setSubsetPart(Part) - Method in interface nxopen.weld.WeldJointBuilder

License requirements: structure_weld ("STRUCTURE WELD")
.

setSubstep(boolean, int[]) - Method in interface nxopen.cae.optimization.TBSLoadCase

Sets the sub steps
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setSubtract(boolean) - Method in interface nxopen.tooling.SolidPatchBuilder

License requirements: None.

setSubtype(HoleFeatureBuilder.HoleSubtype) - Method in interface nxopen.features.HoleFeatureBuilder

License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.

setSubtype(PositioningDimension.Subtype) - Method in interface nxopen.features.RPODimension

License requirements: None.

setSubtype(CircularFrameBuilder.Subtypes) - Method in interface nxopen.geometricutilities.CircularFrameBuilder

License requirements: None.

setSubtype(QuadrilateralFrameBuilder.Subtypes) - Method in interface nxopen.geometricutilities.QuadrilateralFrameBuilder

License requirements: None.

setSubtype(TriangularFrameBuilder.Subtypes) - Method in interface nxopen.geometricutilities.TriangularFrameBuilder

License requirements: None.

setSubType(LayoutBuilder.LayoutSubType) - Method in interface nxopen.tooling.LayoutBuilder

License requirements: None.

setSuffix(String) - Method in interface nxopen.annotations.TableCellStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setSuffix(String) - Method in interface nxopen.routing.BranchPathNumberingBuilder

License requirements: routing_hvac ("Routing HVAC")
.

setSuffixStr(String) - Method in interface nxopen.pdm.PartOperationImportBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setSuggestScaleFactor(boolean) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setSummary(String[]) - Method in interface nxopen.drafting.DrawingCreationWizardBuilder

Sets the summary
License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setSuperIterationType(ResultProbeBuilder.SuperIterType) - Method in interface nxopen.cae.ResultProbeBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setSupplementarySymbol(SupplementarySymbol) - Method in interface nxopen.annotations.LineWeldSideData

Sets the weld supplementary symbol
License requirements: None.

setSupportAllPids(boolean) - Method in interface nxopen.cae.WeldBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setSupportCapOptions(PillarBuilder.CapOptions) - Method in interface nxopen.features.shipdesign.PillarBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setSupportCapOptions(SteelSupportBuilder.CapOptions) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setSupportFaces(ScCollector) - Method in interface nxopen.features.GeodesicSketchBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSupportPlane(Plane) - Method in interface nxopen.geometricutilities.SupportPlaneData

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setSupportPlaneLockStatus(SupportPlaneData.LockPlaneStatus) - Method in interface nxopen.geometricutilities.SupportPlaneData

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setSupportsFromCeiling(boolean) - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setSupportSize(int) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setSupportType(int) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setSuppress(boolean) - Method in interface nxopen.cam.Cutcom

License requirements: cam_base ("CAM BASE")
.

setSuppress(boolean) - Method in interface nxopen.drawings.BrokenViewBuilder

License requirements: None.

setSuppressAction(SuppressByExpressionBuilder.ExpressionAction) - Method in interface nxopen.SuppressByExpressionBuilder

License requirements: None.

setSuppressAngularZerosOption(AngularSuppressZeros) - Method in interface nxopen.annotations.UnitsFormatPreferences

Sets the angular dimension suppress zeros option
License requirements: None.

setSuppressBasedOnVolume(boolean) - Method in interface nxopen.cam.MinCutVolume

License requirements: cam_base ("CAM BASE")
.

setSuppressCutcom(boolean) - Method in interface nxopen.cam.NcmHoleMachining

License requirements: cam_base ("CAM BASE")
.

setSuppressCutcom(boolean) - Method in interface nxopen.cam.NcmPlanarBuilder

License requirements: cam_base ("CAM BASE")
.

setSuppressed(boolean) - Method in interface nxopen.positioning.Constraint

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setSuppressed(boolean) - Method in interface nxopen.Validation

License requirements: None.

setSuppressedInArrangement(Arrangement, boolean) - Method in interface nxopen.positioning.ComponentConstraint

Set the suppression state of this ComponentConstraint in the specified Arrangement .

setSuppressExpTag(Tag, Tag) - Method in interface nxopen.uf.UFModlGeneral

Refer to UF_MODL_set_suppress_exp_tag for documentation.

setSuppressionExp(Tag, String) - Method in interface nxopen.uf.UFAssem

Refer to UF_ASSEM_set_suppression_exp for documentation.

setSuppressPathDisplayFlag(boolean) - Method in interface nxopen.cam.OperationDisplayOptionsBuilder

License requirements: cam_base ("CAM BASE")
.

setSuppressPreZeros(boolean) - Method in interface nxopen.uf.UFDrf

Refer to UF_DRF_set_suppress_pre_zeros for documentation.

setSuppressState(int, int, boolean) - Method in interface nxopen.geometricutilities.PatternDefinition

Sets the suppress state for the instance at the specified indicies.

setSuppressSurfaceModification(boolean) - Method in interface nxopen.preferences.SessionNXGateway

Sets the suppress surface modification flag.

setSuppressViewUpdat(boolean) - Method in interface nxopen.uf.UFDraw

Refer to UF_DRAW_set_suppress_view_updat for documentation.

setSuppressViewUpdate(boolean) - Method in interface nxopen.uf.UFDrf

Refer to UF_DRF_set_suppress_view_update for documentation.

setSuppressWarningMessages(boolean) - Method in interface nxopen.VRMLImporter

Sets the Suppress Warning Messages flag.

setSurface(NXObject) - Method in interface nxopen.cam.DrillSurfaceBuilder

License requirements: cam_base ("CAM BASE")
.

setSurface(NXObject) - Method in interface nxopen.cam.SurfaceDriveGeometrySet

License requirements: cam_base ("CAM BASE")
.

setSurfaceAngleAcceptableColor(NXColor) - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setSurfaceAngleFailureColor(NXColor) - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setSurfaceAngleFailureLimit(double) - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setSurfaceAngleWarningColor(NXColor) - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setSurfaceAngleWarningLimit(double) - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setSurfaceBuildMethod(AddendumSectionBuilder.SurfaceBuildType) - Method in interface nxopen.die.AddendumSectionBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setSurfaceDatatype(RoadBuilder.SurfaceDatatypeChoices) - Method in interface nxopen.motion.RoadBuilder

License requirements: mechanisms ("MECHANISMS")
.

setSurfaceDesignU(int) - Method in interface nxopen.DxfdwgCreator

License requirements: None.

setSurfaceDesignV(int) - Method in interface nxopen.DxfdwgCreator

License requirements: None.

setSurfaceDisplay(ViewVisualizationVisual.SurfaceDisplayOptions) - Method in interface nxopen.preferences.ViewVisualizationVisual

Deprecated.

Deprecated in NX8.5.0. Use ViewVisualizationVisual.setDisplayAppearance(nxopen.preferences.ViewVisualizationVisual.DisplayAppearanceOptions) instead.

setSurfaceDisplayOptions(Tag, UFView.RenderingStyle, UFView.EdgeDisplayOptions) - Method in interface nxopen.uf.UFView

Refer to UF_VIEW_set_surface_display_options for documentation.

setSurfaceExtension(SessionModeling.SurfaceExtensionOption) - Method in interface nxopen.preferences.SessionModeling

License requirements: None.

setSurfaceFileName(String) - Method in interface nxopen.motion.RoadBuilder

License requirements: mechanisms ("MECHANISMS")
.

setSurfaceFinishCfw(LineCfw) - Method in interface nxopen.annotations.SymbolPreferences

Sets the surface finish symbol color, font, and width
License requirements: None.

setSurfaceFinishColor(NXColor) - Method in interface nxopen.annotations.SymbolStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setSurfaceFinishFont(DisplayableObject.ObjectFont) - Method in interface nxopen.annotations.SymbolStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setSurfaceFinishType(SearchCriteriaSurfaceFinishBuilder.SurfaceFinishTypes) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder

License requirements: None.

setSurfaceFinishWidth(LineWidth) - Method in interface nxopen.annotations.SymbolStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setSurfaceLength(GroundClearanceBuilder.SurfaceLengthType) - Method in interface nxopen.features.vehicledesign.GroundClearanceBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSurfaceNormalVectorI(double) - Method in interface nxopen.cam.InspectionEdgePointFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSurfaceNormalVectorJ(double) - Method in interface nxopen.cam.InspectionEdgePointFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSurfaceNormalVectorK(double) - Method in interface nxopen.cam.InspectionEdgePointFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSurfaceOffset(double) - Method in interface nxopen.die.PadChildBuilder

Sets the surface offset of the die pad.

setSurfaceOffset(double) - Method in interface nxopen.die.PadParentBuilder

Sets the surface offset of die pads.

setSurfaceOffset(double) - Method in interface nxopen.fields.DisplayPropertiesBuilder

License requirements: None.

setSurfaceOption(DrillSurfaceBuilder.SurfaceType) - Method in interface nxopen.cam.DrillSurfaceBuilder

License requirements: cam_base ("CAM BASE")
.

setSurfaceOrientEnum(TrueShadingBuilder.SurfaceOrientType) - Method in interface nxopen.display.TrueShadingBuilder

License requirements: None.

setSurfacePercentageEndFirst(double) - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder

Set percentage end first
License requirements: cam_base ("CAM BASE")
.

setSurfacePercentageEndFirst(double) - Method in interface nxopen.cam.DmSurfBuilder

Set the end first
License requirements: cam_base ("CAM BASE")
.

setSurfacePercentageEndLast(double) - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder

Set percentage end last
License requirements: cam_base ("CAM BASE")
.

setSurfacePercentageEndLast(double) - Method in interface nxopen.cam.DmSurfBuilder

Set the end last
License requirements: cam_base ("CAM BASE")
.

setSurfacePercentageEndStep(double) - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder

Set percentage end step
License requirements: cam_base ("CAM BASE")
.

setSurfacePercentageEndStep(double) - Method in interface nxopen.cam.DmSurfBuilder

Set the end step
License requirements: cam_base ("CAM BASE")
.

setSurfacePercentageStartFirst(double) - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder

Set percentage start first
License requirements: cam_base ("CAM BASE")
.

setSurfacePercentageStartFirst(double) - Method in interface nxopen.cam.DmSurfBuilder

Set the start first
License requirements: cam_base ("CAM BASE")
.

setSurfacePercentageStartLast(double) - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder

Set percentage start last
License requirements: cam_base ("CAM BASE")
.

setSurfacePercentageStartLast(double) - Method in interface nxopen.cam.DmSurfBuilder

Set the start last
License requirements: cam_base ("CAM BASE")
.

setSurfacePercentageStartStep(double) - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder

Set percentage start step
License requirements: cam_base ("CAM BASE")
.

setSurfacePercentageStartStep(double) - Method in interface nxopen.cam.DmSurfBuilder

Set the start step
License requirements: cam_base ("CAM BASE")
.

setSurfacePointUV(Point3d) - Method in interface nxopen.features.SnipSurfaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setSurfaceProfile(InspectionMethodBuilder.SurfaceProfileTypes) - Method in interface nxopen.cam.InspectionAnalyzeBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSurfaceProfileMode(InspectionMethodBuilder.SurfaceProfileTypes) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSurfaceRegionName(String) - Method in interface nxopen.cam.SurfaceRegions

License requirements: cam_base ("CAM BASE")
.

setSurfaces(boolean) - Method in interface nxopen.ObjectTypeSelector

License requirements: None.

setSurfaceSensitivityMode(TurnFeatureGeomBuilder.SurfaceSensitivityModes) - Method in interface nxopen.cam.TurnFeatureGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setSurfaceSensitivityTolerance(double) - Method in interface nxopen.cam.TurnFeatureGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setSurfaceShapeOption(ExtendSheetBuilder.SurfaceShape) - Method in interface nxopen.features.ExtendSheetBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSurfaceShapeOption(ExtendSheetBuilder.SurfaceShape) - Method in interface nxopen.features.TrimAndExtendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSurfaceTolerance(double) - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder

License requirements: None.

setSurfaceType(OnestepUnformBuilder.Surface) - Method in interface nxopen.bodydes.OnestepUnformBuilder

License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setSurfaceType(int) - Method in interface nxopen.bodydes.OnestepUnformBuilder

Sets the unform surface type.

setSurfaceType(TrimLineDevelopmentBuilder.Surface) - Method in interface nxopen.die.TrimLineDevelopmentBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setSurfaceType(ExtractFaceBuilder.FaceSurfaceType) - Method in interface nxopen.features.ExtractFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setSurfaceType(TirePropertyAdvancedParameters.SurfType) - Method in interface nxopen.motion.TirePropertyAdvancedParameters

License requirements: mechanisms ("MECHANISMS")
.

setSurfaceType(MWDesignPartingSurfaceBuilder.PartingSurfaceType) - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder

License requirements: None.

setSurfaceTypeOption(BodyContactRecurdyn.SurfaceType) - Method in interface nxopen.motion.BodyContactRecurdyn

License requirements: mechanisms ("MECHANISMS")
.

setSurfTrimTol(double) - Method in interface nxopen.IgesImporter

License requirements: None.

setSurroundingDataProximityDistance(double) - Method in interface nxopen.assemblies.MechanicalRoutingSubsetBuilder

License requirements: None.

setSurroundingDataRecipeMethodType(MechanicalRoutingSubsetBuilder.SurroundingDataRecipeMethod) - Method in interface nxopen.assemblies.MechanicalRoutingSubsetBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setSurroundingPatchSurfaceFilename(String) - Method in interface nxopen.features.FeatureBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setSuspectBoundingBoxColor(NXColor) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setSuspensionTemplate(TireEnvelopeBuilder.SuspensionTemplateType) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSuspensionTemplateFileName(String) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setSuspentionTemplatePoint(TireEnvelopeBuilder.SuspensionTemplateType, int, Point3d) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

Change the location of a joint in the suspension template.

setSwap(boolean) - Method in interface nxopen.features.ShelfBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setSwapProfile(boolean) - Method in interface nxopen.routing.OverstockBuilder

Sets the profile swap flag.

setSwapProfile(boolean) - Method in interface nxopen.routing.StockBuilder

Sets the profile swap flag.

setSwapUandV(boolean) - Method in interface nxopen.SurfaceUVDirectionBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setSwarfGougeCheck(boolean) - Method in interface nxopen.cam.ToolAxisAdvanced

License requirements: cam_base ("CAM BASE")
.

setSwarfTiltAngle(double) - Method in interface nxopen.cam.ToolAxisVariable

License requirements: cam_base ("CAM BASE")
.

setSweep(double) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setSweepAngle(double) - Method in interface nxopen.cam.CircularAboutAxisMoveBuilder

License requirements: None.

setSweepAxis(Tag, double[]) - Method in interface nxopen.uf.UFModl

Refer to UF_MODL_set_sweep_axis for documentation.

setSweepDistance(String) - Method in interface nxopen.features.sheetmetal.ContourFlangeBuilder

Deprecated.

Deprecated in NX10.0.0. Use Expression.setRightHandSide(java.lang.String) on the Expression object returned from Features.SheetMetal.ContourFlangeBuilder#getSweepDistance instead.

setSweepOrientation(SweptVolumeBuilder.SweepOrient) - Method in interface nxopen.features.SweptVolumeBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSweepSide(ContourFlangeBuilder.SweepSideOptions) - Method in interface nxopen.features.sheetmetal.ContourFlangeBuilder

Sets the projection direction of contour flange
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setSweepTolerances(Tag) - Method in interface nxopen.uf.UFModl

Refer to UF_MODL_set_sweep_tolerances for documentation.

setSweepType(ContourFlangeBuilder.SweepTypeOptions) - Method in interface nxopen.features.sheetmetal.ContourFlangeBuilder

Sets the projection side of contour flange
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setSwingAngle(double) - Method in interface nxopen.cam.NcmEngRetBuilder

License requirements: cam_base ("CAM BASE")
.

setSwingAngle(double) - Method in interface nxopen.cam.NcmPlanarEngRetBuilder

License requirements: cam_base ("CAM BASE")
.

setSwingAngle(double) - Method in interface nxopen.cam.NcmScEngRetBuilder

License requirements: cam_base ("CAM BASE")
.

setSwitchDirection(boolean) - Method in interface nxopen.features.IsoparametricCurvesBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSwitchSide(boolean) - Method in interface nxopen.features.shipdesign.StiffenerBySupportPathBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setSwitchSide(boolean) - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setSwitchSide(boolean) - Method in interface nxopen.features.subdivision.StartSymmetricModelingBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setSwitchStartEnd(boolean) - Method in interface nxopen.routing.OverstockBuilder

License requirements: routing_advanced ("Routing Advanced") OR routing_harness ("Routing Harness") OR routing_cabling ("Routing Cabling") OR routing_pipetube ("Routing Piping and Tubing") OR routing_hvac ("Routing HVAC") OR routing_platform ("Routing Platform") OR routing_pid ("Routing PID")
.

setSwitchTrimSide(boolean) - Method in interface nxopen.die.MachineReliefBuilder

License requirements: ug_die_design ("Die Design")
.

setSxlineDefaultPrfs(UFDraw.ArrowParms, UFDraw.SxlineDisplay) - Method in interface nxopen.uf.UFDraw

Refer to UF_DRAW_set_sxline_default_prfs for documentation.

setSxviewDisplay(Tag, UFDraw.SxviewPrfs) - Method in interface nxopen.uf.UFDraw

Refer to UF_DRAW_set_sxview_display for documentation.

setSymbol(Symbol) - Method in interface nxopen.annotations.LineWeldSideData

Sets the elementary weld symbol
License requirements: None.

setSymbol(PartsListBuilder.PartsListSymbolType) - Method in interface nxopen.annotations.PartsListBuilder

License requirements: None.

setSymbolAngle(double) - Method in interface nxopen.annotations.OrdinateDimensionPreferences

Sets the user defined symbol angle with baseline, if the symbol is not aligned with the baseline
License requirements: None.

setSymbolAngle(double) - Method in interface nxopen.annotations.OrdinateStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setSymbolAspectRatio(double) - Method in interface nxopen.annotations.OrdinateDimensionPreferences

Sets the user defined symbol aspect ratio
License requirements: None.

setSymbolAspectRatio(double) - Method in interface nxopen.annotations.OrdinateStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setSymbolAspectRatio(double) - Method in interface nxopen.annotations.TextWithSymbolsBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setSymbolAutoUpdate(boolean) - Method in interface nxopen.annotations.SymbolWorkflowBuilder

License requirements: drafting ("DRAFTING")
.

setSymbolCfw(LineCfw) - Method in interface nxopen.annotations.Gdt

Sets the symbol color, font, and width.

setSymbolCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use TrackDrawingChangesReportFilterBuilder.setReportFilterStatus(nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter, boolean) instead.

setSymbolData(CustomSymbolData) - Method in interface nxopen.annotations.BaseCustomSymbol

Deprecated.

Deprecated in NX9.0.0. Use DraftingCustomSymbolBuilder for Drafting Custom Symbol and PmiCustomSymbolBuilder for PMI Custom Symbol objects.

setSymbolFont(DrawingCompareSettingsBuilder.FontType) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use nxopen.drawings.TrackDrawingChangesGeneralBuilder#setChangeSymbolLineColorFontWidth instead.

setSymbolFontFile(String) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setSymbolHeight(double) - Method in interface nxopen.annotations.OrdinateDimensionPreferences

Sets the user defined symbol height
License requirements: None.

setSymbolHeight(double) - Method in interface nxopen.annotations.OrdinateStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setSymbolHeight(double) - Method in interface nxopen.annotations.TextWithSymbolsBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setSymbolLeaderTerminatorCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use TrackDrawingChangesReportFilterBuilder.setReportFilterStatus(nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter, boolean) instead.

setSymbolLength(double) - Method in interface nxopen.annotations.OrdinateDimensionPreferences

Sets the user defined symbol length
License requirements: None.

setSymbolLength(double) - Method in interface nxopen.annotations.OrdinateStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setSymbolLength(double) - Method in interface nxopen.annotations.TextWithSymbolsBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setSymbolName(String) - Method in interface nxopen.annotations.ChamferDimensionPreferences

Sets the symbol name
License requirements: None.

setSymbolName(String) - Method in interface nxopen.annotations.MasterCustomSymbolData

Deprecated.

Deprecated in NX9.0.0. Use MasterSymbolBuilder instead.

setSymbolName(String) - Method in interface nxopen.annotations.MasterSymbolBuilder

License requirements: drafting ("DRAFTING")
.

setSymbolName(String) - Method in interface nxopen.annotations.ReplaceSymbolBuilder

License requirements: drafting ("DRAFTING")
.

setSymbolName(String) - Method in interface nxopen.annotations.SymbolCatalogBuilder

License requirements: nx_layout ("NX Layout")
.

setSymbolOriginCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use TrackDrawingChangesReportFilterBuilder.setReportFilterStatus(nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter, boolean) instead.

setSymbolPath(String) - Method in interface nxopen.annotations.ReplaceSymbolBuilder

License requirements: drafting ("DRAFTING")
.

setSymbolPlacement(ChamferSymbolPlacement) - Method in interface nxopen.annotations.ChamferDimensionPreferences

Sets the symbol placement
License requirements: None.

setSymbolPlacement(DiameterRadiusSymbolPlacement) - Method in interface nxopen.annotations.DiameterRadiusPreferences

Sets the diameter/radius symbol placement relative to the dimension text
License requirements: None.

setSymbolPreferences(SymbolPreferences) - Method in interface nxopen.annotations.Annotation

Sets the symbol preferences for the annotation.

setSymbolPreferences(SymbolPreferences) - Method in interface nxopen.annotations.SimpleDraftingAidPreferences

Sets the symbol preferences
License requirements: None.

setSymbolPreferences(TextWithSymbolsBuilder.SymbolPreferencesType) - Method in interface nxopen.annotations.TextWithSymbolsBuilder

License requirements: drafting ("DRAFTING")
.

setSymbolPreferences(SymbolPreferences) - Method in interface nxopen.preferences.AnnotationPreferences

Sets the global symbol preferences for the part
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setSymbolPreferences(UFDrf.SymbolPreferences) - Method in interface nxopen.uf.UFDrf

Refer to UF_DRF_set_symbol_preferences for documentation.

setSymbolPreferencesOption(SymbolPreferencesOption) - Method in interface nxopen.annotations.CustomSymbolData

Deprecated.

Deprecated in NX9.0.0. Use DraftingCustomSymbolBuilder for Drafting Custom Symbol and PmiCustomSymbolBuilder for PMI Custom Symbol objects.

setSymbolRetainedStatusCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use TrackDrawingChangesReportFilterBuilder.setReportFilterStatus(nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter, boolean) instead.

setSymbolRule(String) - Method in interface nxopen.drafting.RulesBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setSymbols(SymbolTableBuilder.Symbol[]) - Method in interface nxopen.mechatronics.SymbolTableBuilder

Sets all Symbols.

setSymbolScale(double) - Method in interface nxopen.annotations.LineWeldData

Sets the symbol scale
License requirements: None.

setSymbolScale(double) - Method in interface nxopen.annotations.OrdinateDimensionPreferences

Sets the user defined symbol scale
License requirements: None.

setSymbolScale(double) - Method in interface nxopen.annotations.OrdinateStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setSymbolScale(double) - Method in interface nxopen.annotations.TextWithSymbolsBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setSymbolSize(double) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use TrackDrawingChangesGeneralBuilder.setChangeSymbolSize(double) instead.

setSymbolSize(double) - Method in interface nxopen.preferences.PartVisualizationLine

Sets the symbol size.

setSymbolSizeMethod(TextWithSymbolsBuilder.SymbolSizingMethod) - Method in interface nxopen.annotations.TextWithSymbolsBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setSymbolSmashToSketch(boolean) - Method in interface nxopen.annotations.SymbolWorkflowBuilder

License requirements: drafting ("DRAFTING")
.

setSymbolTextCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use TrackDrawingChangesReportFilterBuilder.setReportFilterStatus(nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter, boolean) instead.

setSymbolToDimensionTextDistance(double) - Method in interface nxopen.annotations.RadialStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setSymbolType(IdSymbolBuilder.SymbolTypes) - Method in interface nxopen.annotations.IdSymbolBuilder

Deprecated.

Deprecated in NX6.0.0. Use IdSymbolBuilder.setType(nxopen.annotations.IdSymbolBuilder.SymbolTypes) instead.

setSymbolType(ImportAutocadBlockBuilder.Type) - Method in interface nxopen.annotations.ImportAutocadBlockBuilder

License requirements: nx_layout ("NX Layout")
.

setSymbolType(DrawingCompareSettingsBuilder.ChangeSymbolType) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use TrackDrawingChangesGeneralBuilder.setChangeSymbolType(nxopen.drawings.TrackDrawingChangesGeneralBuilder.SymbolType) instead.

setSymbolType(Symbol) - Method in interface nxopen.weld.JointExitBuilder

License requirements: structure_weld ("STRUCTURE WELD")
.

setSymbolWidth(DrawingCompareSettingsBuilder.WidthType) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use nxopen.drawings.TrackDrawingChangesGeneralBuilder#setChangeSymbolLineColorFontWidth instead.

setSymmetric(boolean) - Method in interface nxopen.features.sheetmetal.AeroJoggleBuilder

License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setSymmetric(boolean) - Method in interface nxopen.geometricutilities.CurveExtensionBuilder

License requirements: features_modeling ("FEATURES MODELING")
.

setSymmetric(boolean) - Method in interface nxopen.geometricutilities.SplineExtensionBuilder

License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setSymmetric(boolean) - Method in interface nxopen.SketchOffsetBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setSymmetricalStructure(SectionViewBuilder.SymmetricalStructureOptions) - Method in interface nxopen.features.shipdesign.SectionEditorBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setSymmetricalStructure(SectionViewBuilder.SymmetricalStructureOptions) - Method in interface nxopen.features.shipdesign.SectionViewBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setSymmetricAngle(boolean) - Method in interface nxopen.features.DraftBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSymmetricEnabled(boolean) - Method in interface nxopen.features.CurveFinderBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setSymmetricEnabled(boolean) - Method in interface nxopen.features.FaceRecognitionBuilder

License requirements: gateway ("UG GATEWAY")
.

setSymmetricOffsets(boolean) - Method in interface nxopen.features.shipdesign.EdgeCutBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setSymmetricOption(boolean) - Method in interface nxopen.geometricutilities.Limits

License requirements: solid_modeling ("SOLIDS MODELING")
.

setSymmetricSides(boolean) - Method in interface nxopen.features.sheetmetal.JoggleBuilder

License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setSymmetry(boolean) - Method in interface nxopen.die.DrawBeadSegmentBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setSymmetryOption(int) - Method in interface nxopen.features.CurveFinderBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setSymmetryPlane(Plane) - Method in interface nxopen.cae.optimization.TBSShapeLinkCondition

License requirements: cae_opt_toposhape ("NX Shape Optimization")
.

setSymmetryPlane(Plane) - Method in interface nxopen.features.EdgeSymmetryBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setSymmetryPlaneOption(EdgeSymmetryBuilder.SymmetryPlaneOptions) - Method in interface nxopen.features.EdgeSymmetryBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setSymmetryPlaneOption(SymmetricBuilder.PlaneOptions) - Method in interface nxopen.features.SymmetricBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setSymmetryType(TBSTopologyLinkCondition.SymmetryOption) - Method in interface nxopen.cae.optimization.TBSTopologyLinkCondition

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setSyncArrangements(boolean) - Method in interface nxopen.pdm.PartOperationImportBuilder

Deprecated.

Deprecated in NX10.0.2. It is no longer supported.

setSynchlinkEntry(boolean) - Method in interface nxopen.features.WaveDatumBuilder

Sets Entry From SynchLink
License requirements: wave ("WAVE FUNCTIONALITY")
.

setSynchroniseOnLoad(SessionPdm.SynchroniseOnLoadType) - Method in interface nxopen.preferences.SessionPdm

License requirements: None.

setSynchroniseOnSave(SessionPdm.SynchroniseOnSaveType) - Method in interface nxopen.preferences.SessionPdm

License requirements: None.

setSynchronizeArcsFlag(boolean) - Method in interface nxopen.cae.FemSynchronizeOptions

Sets the synchronize arcs flag
License requirements: None.

setSynchronizeConicsFlag(boolean) - Method in interface nxopen.cae.FemSynchronizeOptions

Sets the synchronize conics flag
License requirements: None.

setSynchronizeCoordinateSystemFlag(boolean) - Method in interface nxopen.cae.FemSynchronizeOptions

Sets the synchronize coordinate system flag
License requirements: None.

setSynchronizeLinesFlag(boolean) - Method in interface nxopen.cae.FemSynchronizeOptions

Sets the synchronize lines flag
License requirements: None.

setSynchronizePointsFlag(boolean) - Method in interface nxopen.cae.FemSynchronizeOptions

Sets the synchronize points flag
License requirements: None.

setSynchronizeSketchCurvesFlag(boolean) - Method in interface nxopen.cae.FemSynchronizeOptions

Sets the synchronize sketch curves flag
License requirements: None.

setSynchronizeSplinesFlag(boolean) - Method in interface nxopen.cae.FemSynchronizeOptions

Sets the synchronize splines flag
License requirements: None.

setSyncOrigin(int) - Method in interface nxopen.tooling.DieEngDieTipBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setSyncViews(boolean) - Method in interface nxopen.View

Sets the "Synchronized Views" toggle state of a view.

setSysDefidenticalPointResolution(boolean) - Method in interface nxopen.IgesCreator

License requirements: None.

setSysDefmaxThreeDMdlSpace(boolean) - Method in interface nxopen.IgesCreator

License requirements: None.

setSystemParameters(UFDisp.SystemParams) - Method in interface nxopen.uf.UFDisp

Refer to UF_DISP_set_system_parameters for documentation.

setTabDirection(TableCellStyleBuilder.TabDirectionType) - Method in interface nxopen.annotations.TableCellStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setTable(TagTableObject) - Method in interface nxopen.mechatronics.ReadWriteDeviceBuilder

Sets the table TagTableObject object.

setTableCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use TrackDrawingChangesReportFilterBuilder.setReportFilterStatus(nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter, boolean) instead.

setTableData(int, String, String, Function.InterpolationMethod) - Method in interface nxopen.cae.FunctionBuilder

Sets data for a table function.

setTableOrigin(Point) - Method in interface nxopen.tooling.HoleReportBuilder

License requirements: None.

setTablePropertyOverride(String) - Method in interface nxopen.BasePropertyTable

Set property override flag.

setTablePropertyWithoutValue(String) - Method in interface nxopen.BasePropertyTable

Unset a property.

setTableRotationsAtSafePlane(boolean) - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTableSize(int, int, double) - Method in interface nxopen.GeneralScalarTable

Sets the table size
License requirements: None.

setTabMethod(TabPointDataBuilder.TabMethodType) - Method in interface nxopen.cam.TabPointDataBuilder

License requirements: cam_base ("CAM BASE")
.

setTabsPerRow(int) - Method in interface nxopen.blockstyler.TabControl

License requirements: None.

setTabThreadMethod(TabPointDataBuilder.TabThreadMethodType) - Method in interface nxopen.cam.TabPointDataBuilder

License requirements: cam_base ("CAM BASE")
.

setTabThreadPoint(Point) - Method in interface nxopen.cam.TabPointDataBuilder

License requirements: cam_base ("CAM BASE")
.

setTabularNoteParams(Tag, UFDraw.TabnotParams) - Method in interface nxopen.uf.UFDraw

Deprecated.

The equivalent Open C method has retired

setTabWidth(double) - Method in interface nxopen.cam.TabPointDataBuilder

License requirements: cam_base ("CAM BASE")
.

setTaggedObject(String, TaggedObject) - Method in interface nxopen.blockstyler.PropertyList

Sets the tagged object for the given property name.

setTaggedObject(String, TaggedObject) - Method in interface nxopen.PropertyContainer

Sets the tagged object for the given property name.

setTaggedObjectSelectionCallbacks(SelectionHandle, Selection.FilterTaggedObjectCallback, Selection.TaggedObjectSelectionCallback) - Method in interface nxopen.Selection

Specify selection filter callback for additional filtering of tagged objects based on application specific criteria, and/or selection callback to perform application specific processing for each selection gesture processed.

setTaggedObjectVector(String, TaggedObject[]) - Method in interface nxopen.blockstyler.PropertyList

Sets the tagged object vector for the given property name.

setTaggedObjectVector(String, TaggedObject[]) - Method in interface nxopen.PropertyContainer

Sets the tagged object vector for the given property name.

setTagPriority(GroupLabel.TagPriorityOption) - Method in interface nxopen.visualreporting.GroupLabel

License requirements: nx_visual_reporting ("Visual Reporting")
.

setTagPriorityOfGroupLabel(GroupLabel, GroupLabel.TagPriorityOption) - Method in interface nxopen.visualreporting.VisualReportBuilder

Sets the priority of the givenGroupLabel .

setTagValue(Tag, int, Tag) - Method in interface nxopen.uf.UFParam

Refer to UF_PARAM_set_tag_value for documentation.

setTagVla(Tag, int, int, Tag[]) - Method in interface nxopen.uf.UFParam

Refer to UF_PARAM_set_tag_vla for documentation.

setTail(LineWeldBuilder.TailType) - Method in interface nxopen.annotations.LineWeldBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setTail(Tail) - Method in interface nxopen.annotations.LineWeldData

Sets the tail for the reference line
License requirements: None.

setTailSpecificationText(String[]) - Method in interface nxopen.annotations.LineWeldData

Sets the tail specification text
License requirements: None.

setTangencyCollector(ScCollector) - Method in interface nxopen.features.FaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setTangent(boolean) - Method in interface nxopen.InferredConstraintsBuilder

License requirements: None.

setTangent(boolean) - Method in interface nxopen.SketchAutoConstrainBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setTangentAngle(double) - Method in interface nxopen.weld.WeldBeadBuilder

License requirements: ugweld ("UG WELD")
.

setTangentColor(int) - Method in interface nxopen.preferences.SessionModeling

Sets the tangent color
License requirements: None.

setTangentDirection(Direction) - Method in interface nxopen.features.GeometricConstraintData

License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setTangentDirectionVector(Direction) - Method in interface nxopen.features.MatchEdgeBuilder

License requirements: features_modeling ("FEATURES MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setTangentEdgeAngle(boolean) - Method in interface nxopen.tooling.FormingInsertBuilder

License requirements: None.

setTangentEnabled(boolean) - Method in interface nxopen.features.CurveFinderBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setTangentEnabled(boolean) - Method in interface nxopen.features.FaceRecognitionBuilder

License requirements: gateway ("UG GATEWAY")
.

setTangentialExtension(boolean) - Method in interface nxopen.cam.TurnEngageRetractBuilder

License requirements: cam_base ("CAM BASE")
.

setTangentMagnitude(Scalar) - Method in interface nxopen.features.GeometricConstraintData

License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setTangentPlane(boolean) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setTangentPlaneType(SearchCriteriaFeatureControlFrameBuilder.TangentPlaneOptions) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

License requirements: None.

setTangentSketchGroupEnabled(boolean) - Method in interface nxopen.features.CurveFinderBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setTangentSurface(ISurface) - Method in interface nxopen.features.FaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setTangentTolerance(double) - Method in interface nxopen.features.AestheticFaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setTangentTolerance(double) - Method in interface nxopen.features.NSidedSurfaceBuilder

License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

setTangentTolerance(double) - Method in interface nxopen.features.SectionSurfaceBuilder

Deprecated.

Deprecated in NX9.0.0. Use SectionSurfaceBuilderEx instead.

setTangentTolerance(double) - Method in interface nxopen.features.SilhouetteFlangeBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setTangentTolerance(double) - Method in interface nxopen.features.StudioSurfaceBuilder

License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

setTangentTolerance(double) - Method in interface nxopen.features.StyledBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setTangentTolerance(double) - Method in interface nxopen.features.ThroughCurveMeshBuilder

License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

setTangentTolerance(double) - Method in interface nxopen.features.ThroughCurvesBuilder

License requirements: features_modeling ("FEATURES MODELING") OR nx_freeform_1 ("basic freeform modeling")
.

setTangentTolerance(double) - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setTapDrillSize(double) - Method in interface nxopen.cam.ThreadedHoleSet

License requirements: cam_base ("CAM BASE")
.

setTaperAngle(double) - Method in interface nxopen.cam.WireGuide

License requirements: cam_base ("CAM BASE")
.

setTaperAngle(String) - Method in interface nxopen.features.sheetmetal.DimpleBuilder

Deprecated.

Deprecated in NX10.0.0. Use Expression.setRightHandSide(java.lang.String) on the Expression object returned from DimpleBuilder.getTaperAngle() instead.

setTaperAngleType(SearchModelViewBuilder.ValueComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder

License requirements: None.

setTaperAngleValue(double) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder

License requirements: None.

setTaperAtEnd(String) - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. Use WeldGrooveBuilder.endAngle() instead.

setTaperAtStart(String) - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. Use WeldGrooveBuilder.startAngle() instead.

setTaperBead(boolean) - Method in interface nxopen.die.DrawBeadBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setTaperLocationAY(double) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setTaperLocationBX(double) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setTaperLocationXAxis(double) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setTaperLocationYAxis(double) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setTaperMethod(WeldTaperMethod) - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. Use WeldGrooveBuilder.taperMethod() and WeldGrooveBuilder.setTaperMethod(nxopen.weld.WeldGrooveBuilder.Taper) instead.

setTaperMethod(WeldGrooveBuilder.Taper) - Method in interface nxopen.weld.WeldGrooveBuilder

License requirements: ugweld ("UG WELD")
.

setTaperPoint(Point) - Method in interface nxopen.die.DrawBeadTaperBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setTapers(EmbossTaper[]) - Method in interface nxopen.features.EmbossSidewall

The sidewall tapers
License requirements: solid_modeling ("SOLIDS MODELING")
.

setTaperSides(BendTaperBuilder.BendTaperSides) - Method in interface nxopen.features.sheetmetal.BendTaperBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setTaperType(DrawBeadTaperBuilder.TaperTypes) - Method in interface nxopen.die.DrawBeadTaperBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setTaperType(EndCutBlockBuilder.TaperTypeOption) - Method in interface nxopen.EndCutBlockBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setTarget(String) - Method in interface nxopen.cae.SimLoadRecipeMapEntry

License requirements: nx_masterfem ("Finite Element Modeling")
.

setTarget(Plane) - Method in interface nxopen.display.RasterImageBuilder

License requirements: None.

setTarget(Body) - Method in interface nxopen.features.BlockFeatureBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setTarget(Body) - Method in interface nxopen.features.BooleanBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setTarget(ScCollector) - Method in interface nxopen.features.OffsetEmbossBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setTarget(NXObject) - Method in interface nxopen.features.RPODimension

License requirements: None.

setTarget(ShipPreparationInfo) - Method in interface nxopen.features.shipdesign.ShipPreparationInfo

License requirements: nx_ship_basic ("Ship Basic Design")
.

setTarget(DisplayableObject) - Method in interface nxopen.geometricutilities.Extend

License requirements: solid_modeling ("SOLIDS MODELING")
.

setTarget(DisplayableObject) - Method in interface nxopen.layout2d.ReparentComponentBuilder

License requirements: None.

setTargetAndTool(PositioningDimension.Subtype, NXObject, RPOBuilder.AssociativityType, Point3d, NXObject, RPOBuilder.AssociativityType, Point3d) - Method in interface nxopen.features.RPOBuilder

Sets the target and tool entities.

setTargetAreaXhatch(Tag, double, double) - Method in interface nxopen.uf.UFGdt

Refer to UF_GDT_set_target_area_xhatch for documentation.

setTargetAssociativity(AssociativityType) - Method in interface nxopen.features.RPODimension

License requirements: None.

setTargetBinderType(LsdynaGeometryPreparationBuilder.TargetBinder) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setTargetBodies(Body[]) - Method in interface nxopen.geometricutilities.BooleanOperation

Set the target bodies
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setTargetBody(ScCollector) - Method in interface nxopen.features.EmbossBodyBuilder

License requirements: None.

setTargetBody(Body) - Method in interface nxopen.features.HoleFeatureBuilder

Sets target body for the hole.

setTargetBody(Body) - Method in interface nxopen.features.sheetmetal.NormalCutoutBuilder

Sets the target body on which the normal cutout is created.

setTargetBody(Body) - Method in interface nxopen.features.shipdesign.ShipPreparationInfo

License requirements: nx_ship_basic ("Ship Basic Design")
.

setTargetBody(NXObject) - Method in interface nxopen.tooling.ReusableObjectPasteBuilder

License requirements: None.

setTargetBodyCollector(ScCollector) - Method in interface nxopen.features.SplitBodyBuilder

License requirements: None.

setTargetBodyCollector(ScCollector) - Method in interface nxopen.features.TrimBody2Builder

License requirements: None.

setTargetBodyForSubtract(Body) - Method in interface nxopen.tooling.SlugRetentionBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setTargetClass(String) - Method in interface nxopen.cam.CutterExport

License requirements: None.

setTargetComponents(NXObject[]) - Method in interface nxopen.features.MasterCutBuilder

The target components that are cut
License requirements: solid_modeling ("SOLIDS MODELING")
.

setTargetComponentSelection(boolean) - Method in interface nxopen.features.PaintParametersBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setTargetCurveOffsetType(GlobalShapingBuilder.OffsetMethod) - Method in interface nxopen.features.GlobalShapingBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setTargetCurveOrientation(GlobalShapingBuilder.TargetCurveOrientationType) - Method in interface nxopen.features.GlobalShapingBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setTargetCurveType(MorphRevolvedMeshBuilder.CurveType) - Method in interface nxopen.cae.MorphRevolvedMeshBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setTargetDieType(LsdynaGeometryPreparationBuilder.TargetDie) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setTargetDirectory(String) - Method in interface nxopen.tooling.MotionSimulationBuilder

License requirements: None.

setTargetDirectory(String) - Method in interface nxopen.tooling.SetPressModelBuilder

License requirements: nx_dievalidation ("DIE VALIDATION")
.

setTargetDynamicPlane(CoordinateSystem) - Method in interface nxopen.features.subdivision.SubdivisionProjectCageBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setTargetEdgeEndPoint(Point) - Method in interface nxopen.cae.ContactMeshBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setTargetEdgeStartPoint(Point) - Method in interface nxopen.cae.ContactMeshBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setTargetElementEdgePathMethod(ElemEdgePathMethod) - Method in interface nxopen.cae.MeshFromBoundaryBuilder

Set the target elemnt path of the selection
License requirements: nx_masterfem ("Finite Element Modeling")
.

setTargetFace(ScCollector) - Method in interface nxopen.features.EmbossTarget

Sets the target faces on which the emboss places.

setTargetFace(Face) - Method in interface nxopen.features.sheetmetal.BendBuilder

Sets the target face on which bend feature applies.

setTargetFace(Face) - Method in interface nxopen.features.sheetmetal.JogBuilder

Sets the target face on which jog feature applies.

setTargetFace(Face) - Method in interface nxopen.tooling.EnlargeSurfaceBuilder

Sets the target face to target surface data.

setTargetFace(NXObject) - Method in interface nxopen.tooling.ReusableObjectPasteBuilder

License requirements: None.

setTargetFaces(NXObject[]) - Method in interface nxopen.features.OvercrownBuilder

Sets the target faces for the Global Shaping Operator
License requirements: solid_modeling ("SOLIDS MODELING")
.

setTargetFemoccs(FEModelOccurrence[]) - Method in interface nxopen.cae.ImportSimulationBuilder

Set FeModel Occurrences to import onto
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setTargetFileName(String) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setTargetGroup(CaeGroup) - Method in interface nxopen.cae.CAEConnectionBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setTargetIds(int[]) - Method in interface nxopen.cae.ModelUpdateSensitivityViewerBuilder

Sets the terget IDs
License requirements: nx_correl_update ("FE Model Update")
.

setTargetIndex(int) - Method in interface nxopen.annotations.IDatumTarget

Sets the datum target index.

setTargetLayer(int) - Method in interface nxopen.motion.PackagingTraceBuilder

Sets the PackagingTrace target layer
License requirements: mechanisms ("MECHANISMS")

Created in NX4.0.0

setTargetLineEnd(Point) - Method in interface nxopen.cae.MorphRevolvedMeshBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setTargetLineStart(Point) - Method in interface nxopen.cae.MorphRevolvedMeshBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setTargetList(PackagingMeasureBuilder.GeometryData[]) - Method in interface nxopen.motion.PackagingMeasureBuilder

Sets the target geometry data.

setTargetMaterialSide(boolean) - Method in interface nxopen.features.EmbossBodyBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setTargetMatrix(Matrix3x3) - Method in interface nxopen.display.CameraBuilder

License requirements: None.

setTargetObjective(TBSObjectives.ObjectiveType) - Method in interface nxopen.cae.optimization.TBSObjectives

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setTargetOption(FitSurfaceBuilder.TargetType) - Method in interface nxopen.features.FitSurfaceBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setTargetPart(TaggedObject) - Method in interface nxopen.annotations.PmiWaveLinkBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setTargetPlane(Plane) - Method in interface nxopen.features.subdivision.SubdivisionProjectCageBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setTargetPoint(Point) - Method in interface nxopen.cae.BoundingVolumeBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setTargetPoint(Point) - Method in interface nxopen.cam.BoundaryTurnBlank

License requirements: cam_base ("CAM BASE")
.

setTargetPoint(Point) - Method in interface nxopen.cam.InspectionCmmCommandBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTargetPoint(Point) - Method in interface nxopen.cam.InspectionLinear5axisMoveToPointBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTargetPoint(Point) - Method in interface nxopen.cam.InspectionLinearMoveToPointBuilder

License requirements: None.

setTargetPoint(Point) - Method in interface nxopen.cam.InspectionMeasurePointBuilder

License requirements: None.

setTargetPoint(Point) - Method in interface nxopen.features.GlobalShapingBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setTargetPoint(Point3d) - Method in interface nxopen.features.RPODimension

License requirements: None.

setTargetPointMethod(GlobalShapingBuilder.PointMethodType) - Method in interface nxopen.features.GlobalShapingBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setTargetPosition(Point3d) - Method in interface nxopen.display.CameraBuilder

License requirements: None.

setTargetProductionUnit(ModelPlantRoot, ModelProductionUnit, boolean) - Method in interface nxopen.linedesigner.ModelPlantManager

Set Target Production Unit
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setTargetPunchType(LsdynaGeometryPreparationBuilder.TargetPunch) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setTargetReduction(double) - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setTargetRegions(int[]) - Method in interface nxopen.cam.MergeSubopCommand

Set the target region
License requirements: None.

setTargetReversed(boolean) - Method in interface nxopen.features.TrimExtendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setTargets(EmbossTarget[]) - Method in interface nxopen.features.EmbossLimit

The emboss targets
License requirements: solid_modeling ("SOLIDS MODELING")
.

setTargets(Body[]) - Method in interface nxopen.features.TrimBodyBuilder

Sets the targets for a trim body opearation.

setTargetScope(RelinkerBuilder.LinkScope) - Method in interface nxopen.assemblies.RelinkerBuilder

License requirements: wave ("WAVE FUNCTIONALITY")
.

setTargetSelectScope(TrimMoldComponentsBuilder.TargetScope) - Method in interface nxopen.tooling.TrimMoldComponentsBuilder

License requirements: None.

setTargetSetEdgePath(int, CAEEdge[], CAEVertex[]) - Method in interface nxopen.cae.SetManager

Deprecated.

Deprecated in NX10.0.0. Use overloaded CAE.SetManager#setTargetSetEdgePath with additional arguments instead.

setTargetSetEdgePath(int, CAEEdge[], CAEVertex[], boolean[], boolean[], double[]) - Method in interface nxopen.cae.SetManager

Sets the CAE edge path in the specified set
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setTargetSetElemEdgePath(int, FEElemEdge[], FENode[]) - Method in interface nxopen.cae.SetManager

Deprecated.

Deprecated in NX10.0.0. Use overloaded CAE.SetManager#setTargetSetElemEdgePath with additional arguments instead.

setTargetSetElemEdgePath(int, FEElemEdge[], FENode[], boolean[], boolean[], boolean[], double[], boolean[], double[]) - Method in interface nxopen.cae.SetManager

Sets the CAE element edge path in the specified set
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setTargetSetExcludedMembers(int, SetObject[]) - Method in interface nxopen.cae.SetManager

Sets the CAE objects in the specified target set exclude set
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setTargetSetGroup(int, CaeSetGroupFilterType, CaeGroup) - Method in interface nxopen.cae.SetManager

Sets the CAE group in the specified set
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setTargetSetMembers(int, SetObject[]) - Method in interface nxopen.cae.SetManager

Sets the CAE objects in the specified set
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setTargetSetPlane(int, Point3d, Vector3d) - Method in interface nxopen.cae.SetManager

Creates a plane target set.

setTargetSetPointLocation(int, Point3d) - Method in interface nxopen.cae.SetManager

Creates a point location target set.

setTargetSourceType(FitCurveBuilder.TargetSourceTypes) - Method in interface nxopen.features.FitCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setTargetSymbolCfw(LineCfw) - Method in interface nxopen.annotations.SymbolPreferences

Sets the target symbol color, font, and width
License requirements: None.

setTargetSymbolColor(NXColor) - Method in interface nxopen.annotations.SymbolStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setTargetSymbolFont(DisplayableObject.ObjectFont) - Method in interface nxopen.annotations.SymbolStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setTargetSymbolWidth(LineWidth) - Method in interface nxopen.annotations.SymbolStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setTargetType(SimLoadRecipeMapEntryTargetTypes.TargetTypes) - Method in interface nxopen.cae.SimLoadRecipeMapEntry

License requirements: nx_masterfem ("Finite Element Modeling")
.

setTargetType(FillHoleBuilder.TargetTypes) - Method in interface nxopen.facet.FillHoleBuilder

License requirements: None.

setTargetType(SplitProfilePlateBuilder.ProfileType) - Method in interface nxopen.features.shipdesign.SplitProfilePlateBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setTargetType(SubdivisionProjectCageBuilder.TargetTypes) - Method in interface nxopen.features.subdivision.SubdivisionProjectCageBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setTargetUnit(Unit) - Method in interface nxopen.cae.optimization.DAOObjective

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setTargetValue(double) - Method in interface nxopen.cae.optimization.DAOObjective

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setTargetVector(Direction) - Method in interface nxopen.routing.AlignStockBuilder

License requirements: routing_base ("Routing Basic")
.

setTargetVolume(double) - Method in interface nxopen.cae.optimization.TBSSmoothBuilder

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setTargetWindowSetting(Preference.TargetGraphicWindowOption) - Method in interface nxopen.cae.xyplot.Preference

License requirements: nx_ftk ("NX Advanced Graphing")
.

setTaskDescription(String) - Method in interface nxopen.tooling.ConcurrentDesignManagementBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setTblDepColor(NXColor) - Method in interface nxopen.fields.DisplayPropertiesBuilder

License requirements: None.

setTblDepDomColor(DisplayPropertiesBuilder.DepDomColorEnum) - Method in interface nxopen.fields.DisplayPropertiesBuilder

License requirements: None.

setTblDepLabelValues(DisplayPropertiesBuilder.DepLabelValueEnum) - Method in interface nxopen.fields.DisplayPropertiesBuilder

License requirements: None.

setTblDepPtType(DisplayPropertiesBuilder.TblPointTypeEnum) - Method in interface nxopen.fields.DisplayPropertiesBuilder

License requirements: None.

setTblDepSymbolSize(double) - Method in interface nxopen.fields.DisplayPropertiesBuilder

License requirements: None.

setTblIndepColor(NXColor) - Method in interface nxopen.fields.DisplayPropertiesBuilder

License requirements: None.

setTblIndepPtType(DisplayPropertiesBuilder.ValuesEnum) - Method in interface nxopen.fields.DisplayPropertiesBuilder

License requirements: None.

setTeamcenter(boolean) - Method in interface nxopen.annotations.ImportSymbolBuilder

License requirements: nx_layout ("NX Layout")
.

setTechniqueType(CgfxMattexBuilder.Technique) - Method in interface nxopen.display.CgfxMattexBuilder

Deprecated.

Deprecated in NX10.0.0. No alternative provided for this class.

setTeethNumber(double) - Method in interface nxopen.cam.VerticalPosition

License requirements: cam_base ("CAM BASE")
.

setTemperaturePlaces(int) - Method in interface nxopen.cam.InspectionCmmCommandBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTemperatureUnits(InspectionCmmCommandBuilder.TemperatureUnitsOptions) - Method in interface nxopen.cam.InspectionCmmCommandBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTemplate(String, String) - Method in interface nxopen.cam.FeatureProcessBuilder

Sets the active template name and the feature process template
License requirements: ug_holemaking ("UG Holemaking")
.

setTemplateCategoryName(String) - Method in interface nxopen.features.shipdesign.SteelDistributionBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setTemplateFile(String) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setTemplateFile(String) - Method in interface nxopen.DxfdwgImporter

License requirements: None.

setTemplateFile(String) - Method in interface nxopen.report.Report

License requirements: None.

setTemplateFile(String) - Method in interface nxopen.weld.WeldImportBuilder

License requirements: None.

setTemplateFileName(String) - Method in interface nxopen.FileNew

License requirements: None.

setTemplateFileName(String) - Method in interface nxopen.weld.ExportWeldBuilder

License requirements: ugweld ("UG WELD")
.

setTemplateInstantiationIsComplete(boolean) - Method in interface nxopen.DraftingManager

Set the drawing template instantiation status
License requirements: drafting ("DRAFTING")
.

setTemplateName(String) - Method in interface nxopen.cam.WorkInstructionBuilder

License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.

setTemplateName(String) - Method in interface nxopen.features.shipdesign.DrawingTemplateBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setTemplateName(String) - Method in interface nxopen.features.shipdesign.SteelDistributionBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setTemplateName(String) - Method in interface nxopen.linedesigner.ReuseLibraryDragData

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setTemplateName(String) - Method in interface nxopen.tooling.EjectorTableBuilder

License requirements: ug_mold_design ("UG MOLD")
.

setTemplatePresentationName(String) - Method in interface nxopen.FileNew

License requirements: None.

setTemplates(AttributeTemplatesBuilder.TemplatesOptions) - Method in interface nxopen.AttributeTemplatesBuilder

License requirements: None.

setTemplateSetName(String) - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setTemplateSheet(ExportToDWGBuilder.TemplateTypeAPI) - Method in interface nxopen.linedesigner.ExportToDWGBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setTemplateStatus(CAMObject[], boolean, boolean) - Method in interface nxopen.cam.CAMSetup

Set Template status
License requirements: cam_base ("CAM BASE")
.

setTemplateStatus(CAMObject[], boolean, boolean) - Method in interface nxopen.cam.InspectionSetup

Set Template status
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTemplateType(MarkAsTemplateBuilder.TemplateTypeEnum) - Method in interface nxopen.drawings.MarkAsTemplateBuilder

License requirements: drafting ("DRAFTING")
.

setTemplateType(FileNewTemplateType) - Method in interface nxopen.FileNew

License requirements: None.

setTemporaryFacetDisplay(boolean) - Method in interface nxopen.facet.PaintBrushBuilder

Flag to use temporary facet display
License requirements: None.

setTempOrientation(Matrix3x3) - Method in interface nxopen.mechanicalrouting.TransformBlockBuilder

License requirements: routing_base ("Routing Basic")
.

setTempPosition(Point3d) - Method in interface nxopen.mechanicalrouting.TransformBlockBuilder

License requirements: routing_base ("Routing Basic")
.

setTensileStrength(double) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setTensorComponentAbsoluteValue(Result.TensorDerivedAbsolute) - Method in interface nxopen.cae.CrossSectionParameters

Set the method used when calculating the absolute values for the derived components of Result.DataType.TENSOR like Result.Component.MAXIMUM_PRINCIPAL
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Created in NX8.0.1

setTensorComponentAbsoluteValue(Result.TensorDerivedAbsolute) - Method in interface nxopen.cae.ResultParameters

Set the method used when calculating the absolute values for the derived components of CAE.Result.DataType#TENSOR like CAE.Result.Component#MAXIMUM_PRINCIPAL
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Created in NX8.0.1

setTerDatLetter(String) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTerDirection(InspectionAlignmentBuilder.AlignmentDirections) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTerminalPort(NXObject) - Method in interface nxopen.routing.TerminalPortBuilder

License requirements: routing_harness ("Routing Harness")
.

setTerminalSegmentSolidDisplay(boolean) - Method in interface nxopen.preferences.RoutingElectrical

Sets the terminal segment solid display option
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setTerminatingObjects(DisplayableObject[]) - Method in interface nxopen.markup.MarkupObject

Sets the terminating objects
License requirements: None.

setTerminatorType(DatumTargetBuilder.TerminatorTypes) - Method in interface nxopen.annotations.DatumTargetBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setTerminatorType(LeaderData.LeaderType) - Method in interface nxopen.annotations.LeaderData

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setTertiaryDatumDualMCMType(SearchCriteriaFeatureControlFrameBuilder.TertiaryDatumDualMCMOptions) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

Deprecated.

Deprecated in NX10.0.0. Use Annotations.SearchCriteriaFeatureControlFrameBuilder#datumMCMType and Annotations.SearchCriteriaFeatureControlFrameBuilder#setDatumMCMType instead.

setTertiaryDatumDualText(String) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

Deprecated.

Deprecated in NX10.0.0. Use Annotations.SearchCriteriaFeatureControlFrameBuilder#datumText and Annotations.SearchCriteriaFeatureControlFrameBuilder#setDatumText instead.

setTertiaryDatumExtendedText(String) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setTertiaryDatumMCMType(SearchCriteriaFeatureControlFrameBuilder.TertiaryDatumMCMOptions) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

Deprecated.

Deprecated in NX10.0.0. Use Annotations.SearchCriteriaFeatureControlFrameBuilder#datumMCMType and Annotations.SearchCriteriaFeatureControlFrameBuilder#setDatumMCMType instead.

setTertiaryDatumReference(DatumReference) - Method in interface nxopen.annotations.FcfFrame

Deprecated.

Deprecated in NX10.0.0. Use FeatureControlFrameDataBuilder.tertiaryDatumReference() instead.

setTertiaryDatumText(String) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

Deprecated.

Deprecated in NX10.0.0. Use Annotations.SearchCriteriaFeatureControlFrameBuilder#datumText and Annotations.SearchCriteriaFeatureControlFrameBuilder#setDatumText instead.

setTertiaryDirection(InspectionAlignmentAssistantBuilder.Direction) - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTertiaryOffsetGeometry(NXObject) - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTertiaryRoughnessText(String) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder

License requirements: None.

setTertiaryRoughnessType(SearchModelViewBuilder.TextComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder

License requirements: None.

setTertiaryState(InspectionAlignmentAssistantBuilder.State) - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTertiaryType(InspectionAlignmentAssistantBuilder.FeatureType) - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTerXorigin(boolean) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTerYorigin(boolean) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTerZorigin(boolean) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTessellation(boolean) - Method in interface nxopen.ObjectTypeSelector

License requirements: None.

setTessOption(JtCreator.TessellationOption) - Method in interface nxopen.JtCreator

License requirements: None.

setTessOption(ListCreator.TessellationOption) - Method in interface nxopen.ListCreator

License requirements: None.

setTestDirectionOption(TBSTestFunction.Direction) - Method in interface nxopen.cae.optimization.TBSTestFunction

License requirements: cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setTestOutput(String) - Method in interface nxopen.BaseSession

setTestOutput(String, int) - Method in interface nxopen.BaseSession

setText(String[]) - Method in interface nxopen.annotations.BalloonNoteBuilder

Sets the text
License requirements: None.

setText(String[]) - Method in interface nxopen.annotations.CustomSymbolTextData

Deprecated.

Deprecated in NX9.0.0. Use MasterSymbolListItemBuilder instead. Use BaseCustomSymbolBuilder.texts() to query list of custom symbol texts.

setText(String[]) - Method in interface nxopen.annotations.GeneralNoteBuilder

Sets the text
License requirements: None.

setText(String[]) - Method in interface nxopen.annotations.LabelData

Sets the text
License requirements: None.

setText(String[]) - Method in interface nxopen.annotations.NoteData

Sets the text
License requirements: None.

setText(String) - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder

License requirements: None.

setText(String) - Method in interface nxopen.annotations.SearchCriteriaPMINotesBuilder

License requirements: None.

setText(String[]) - Method in interface nxopen.annotations.SimpleDraftingAid

Sets the drafting aid's text.

setText(String[]) - Method in interface nxopen.annotations.SpecificNoteBuilder

Sets the text
License requirements: None.

setText(String[]) - Method in interface nxopen.annotations.TextWithSymbolsBuilder

Sets the text of the annotation
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setText(String) - Method in interface nxopen.cam.Cycle

License requirements: cam_base ("CAM BASE")
.

setText(String[]) - Method in interface nxopen.cam.Notes

Sets the text
License requirements: cam_base ("CAM BASE")
.

setText(String[]) - Method in interface nxopen.report.TextItem

Set the text content.

setTextAboveLeader(DiameterRadiusLeaderStub) - Method in interface nxopen.annotations.RadialStyleBuilder

Deprecated.

Deprecated in NX9.0.0. Use DimensionStyleBuilder.setTextPosition(nxopen.annotations.TextPosition) instead.

setTextAboveLeader(UFDrf.TextAboveLeader) - Method in interface nxopen.uf.UFDrf

Refer to UF_DRF_set_text_above_leader for documentation.

setTextAlignment(DraftingNoteBuilder.TextAlign) - Method in interface nxopen.annotations.DraftingNoteBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setTextAlignment(TableCellStyleBuilder.TextAlignmentType) - Method in interface nxopen.annotations.TableCellStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setTextAngle(double) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setTextAngle(double) - Method in interface nxopen.tooling.AutoDimensionBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setTextArrowPlacement(TextPlacement) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setTextCentered(boolean) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setTextColor(NXColor) - Method in interface nxopen.cae.PostAnnotation

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setTextColor(double[]) - Method in interface nxopen.cam.WorkInstructionBuilder

Sets the text color
License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.

setTextColor(NXColor) - Method in interface nxopen.TextColorFontWidthBuilder

License requirements: None.

setTextData(CustomSymbolTextData[]) - Method in interface nxopen.annotations.CustomSymbolData

Deprecated.

Deprecated in NX9.0.0. Use DraftingCustomSymbolBuilder for Drafting Custom Symbol and PmiCustomSymbolBuilder for PMI Custom Symbol objects.

setTextDisplay(boolean) - Method in interface nxopen.cae.MeshControlDisplayOptionsBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setTextExtension(String) - Method in interface nxopen.cam.InspectionAnalyzeOutputBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTextFont(String) - Method in interface nxopen.markup.EditObjectDisplayBuilder

License requirements: None.

setTextFont(String) - Method in interface nxopen.TextColorFontWidthBuilder

License requirements: None.

setTextFont(AutoDimensionBuilder.TextFontType) - Method in interface nxopen.tooling.AutoDimensionBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setTextFontMappingFile(String) - Method in interface nxopen.DxfdwgCreator

License requirements: None.

setTextFontMappingFile(String) - Method in interface nxopen.DxfdwgImporter

License requirements: None.

setTextFontStyle(TextBuilder.FontStyleOptions) - Method in interface nxopen.markup.EditObjectDisplayBuilder

License requirements: None.

setTextGapFactor(double) - Method in interface nxopen.drawings.ViewDetailLabelBuilder

License requirements: drafting ("DRAFTING")
.

setTextLocation(Point) - Method in interface nxopen.linedesigner.HoleFeatureBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setTextMode(UFText.ModeS) - Method in interface nxopen.uf.UFText

Deprecated.

setTextOrienationAngle(double) - Method in interface nxopen.annotations.DimensionPreferences

Sets the angle if text orientation is TextOrientation.BY_ANGLE
License requirements: None.

setTextOrientation(TextOrientation) - Method in interface nxopen.annotations.DimensionPreferences

Sets the text orientation
License requirements: None.

setTextOrientation(TextOrientation) - Method in interface nxopen.annotations.OrdinateDimensionPreferences

Sets the text orientation
License requirements: None.

setTextOrientation(AutoDimensionBuilder.TextOrientationType) - Method in interface nxopen.tooling.AutoDimensionBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setTextOrientationAngle(double) - Method in interface nxopen.annotations.OrdinateDimensionPreferences

Sets the angle if text orientation is Annotations.TextOrientation#BY_ANGLE
License requirements: None.

setTextOverLeaderGapFactor(double) - Method in interface nxopen.annotations.LineAndArrowPreferences

Sets the character size factor that controls the gap between text and the leader
License requirements: None.

setTextOverLeaderGapFactor(double) - Method in interface nxopen.annotations.LineArrowStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setTextOverStubFactor(double) - Method in interface nxopen.annotations.LineArrowStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setTextOverStubSpaceFactor(double) - Method in interface nxopen.annotations.LineAndArrowPreferences

Sets the text to stub spacing factor
License requirements: None.

setTextPlacement(TextPlacement) - Method in interface nxopen.annotations.DimensionPreferences

Sets the dimension text placement
License requirements: None.

setTextPlacement(ViewDetailLabelBuilder.LabelParentTextPlacement) - Method in interface nxopen.drawings.ViewDetailLabelBuilder

License requirements: drafting ("DRAFTING")
.

setTextPlaneRelativeToArrow(CuttingPlaneSymbolBuilder.TextPlaneRelativeArrow) - Method in interface nxopen.annotations.CuttingPlaneSymbolBuilder

License requirements: geometric_tol ("GDT")
.

setTextPosition(TextPosition) - Method in interface nxopen.annotations.DimensionPreferences

Sets the text position representing above or after stub
License requirements: None.

setTextPosition(TextPosition) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: None.

setTextPreferencesOption(TextPreferencesOption) - Method in interface nxopen.annotations.CustomSymbolData

Deprecated.

Deprecated in NX9.0.0. Use DraftingCustomSymbolBuilder for Drafting Custom Symbol and PmiCustomSymbolBuilder for PMI Custom Symbol objects.

setTextPropertyValue(String, String[]) - Method in interface nxopen.cae.PropertyTable

Sets the text value of the property
License requirements: None.

setTextScale(double) - Method in interface nxopen.markup.EditObjectDisplayBuilder

License requirements: None.

setTextSize(double) - Method in interface nxopen.linedesigner.HoleFeatureBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setTextSizeFixed(boolean) - Method in interface nxopen.preferences.SessionSketch

Sets the text size fixed flag.

setTextSizeFixed(boolean) - Method in interface nxopen.preferences.SketchPreferences

Sets the option that controls if the text size should be fixed.

setTextString(String) - Method in interface nxopen.features.TextBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setTextStyle(String) - Method in interface nxopen.TextColorFontWidthBuilder

License requirements: None.

setTextSymbolDisplayFlag(boolean) - Method in interface nxopen.cae.SimBCDisplay

Sets the true/false flag based on whether the text symbol of the BC is displayed in the graphics window
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setTextToggle(boolean) - Method in interface nxopen.cam.ToolChangeCiBuilder

License requirements: cam_base ("CAM BASE")
.

setTextToLineDistance(double) - Method in interface nxopen.annotations.LineAndArrowPreferences

Sets the text to line distance
License requirements: None.

setTextToLineDistance(double) - Method in interface nxopen.annotations.LineArrowStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setTextType(MasterSymbolListItemBuilder.TextTypes) - Method in interface nxopen.annotations.MasterSymbolListItemBuilder

License requirements: drafting ("DRAFTING")
.

setTextType(SearchModelViewBuilder.TextComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder

License requirements: None.

setTextType(SearchModelViewBuilder.TextComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaPMINotesBuilder

License requirements: None.

setTexturedToggle(boolean) - Method in interface nxopen.display.IrayPlusSimpleMaterialEditorBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setTextureSpaceEnum(IrayPlusSimpleMaterialEditorBuilder.TextureSpace) - Method in interface nxopen.display.IrayPlusSimpleMaterialEditorBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setTextureSpaceInfo(Tag, UFDisp.TextureSpaceInfo) - Method in interface nxopen.uf.UFDisp

Refer to UF_DISP_set_texture_space_info for documentation.

setTextureSpaceShaderType(CgfxMattexBuilder.TextureSpaceShader) - Method in interface nxopen.display.CgfxMattexBuilder

Deprecated.

Deprecated in NX10.0.0. No alternative provided for this class.

setTextValue(String) - Method in interface nxopen.annotations.BusinessModifier

Sets the value
License requirements: geometric_tol ("GDT")
.

setTextValue(String) - Method in interface nxopen.cam.ToolChangeCiBuilder

License requirements: cam_base ("CAM BASE")
.

setTextWidth(String) - Method in interface nxopen.TextColorFontWidthBuilder

License requirements: None.

setTfeatureSet(Feature) - Method in interface nxopen.tooling.DieDesDrawDieBuilder

License requirements: ug_die_design ("Die Design")
.

setTfeatureSet(Feature) - Method in interface nxopen.tooling.DieDesDrawPunchBuilder

License requirements: ug_die_design ("Die Design")
.

setTgShowA(boolean) - Method in interface nxopen.tooling.AssemblyDrawingBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setTgShowB(boolean) - Method in interface nxopen.tooling.AssemblyDrawingBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setTgtPierceOption(boolean) - Method in interface nxopen.features.ShellBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setThickenDirection(boolean) - Method in interface nxopen.features.shipdesign.SteelInsulationBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setThickenDirection(boolean) - Method in interface nxopen.routing.PlatformCreatorBuilder

License requirements: routing_platform ("Routing Platform")
.

setThickenOption(boolean) - Method in interface nxopen.features.EmbossBodyBuilder

License requirements: None.

setThickenOption(PlateStockBuilder.ThickenOptions) - Method in interface nxopen.features.shipdesign.PlateStockBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setThickness(double) - Method in interface nxopen.bodydes.OnestepUnformBuilder

License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setThickness(double) - Method in interface nxopen.cae.LaminatePly

License requirements: nx_lam_composites ("Laminate Composites")
.

setThickness(double) - Method in interface nxopen.die.FlangeSteelRibChildBuilder

Sets the thickness of the Flange Steel Rib
License requirements: ug_die_design ("Die Design")
.

setThickness(double) - Method in interface nxopen.die.FlangeSteelRibParentBuilder

Sets the thickness of the Flange Steel Ribs
License requirements: ug_die_design ("Die Design")
.

setThickness(double) - Method in interface nxopen.die.RibChildBuilder

Sets the thickness of the die rib.

setThickness(double) - Method in interface nxopen.die.RibParentBuilder

Sets the thickness of die ribs.

setThickness(double) - Method in interface nxopen.die.TrimFlangeDieAssistantBuilder

License requirements: ug_die_design ("Die Design")
.

setThickness(String) - Method in interface nxopen.features.sheetmetal.ContourFlangeBuilder

Deprecated.

Deprecated in NX10.0.0. Use Expression.setRightHandSide(java.lang.String) on the Expression object returned from Features.SheetMetal.ContourFlangeBuilder#getThickness instead.

setThickness(String) - Method in interface nxopen.features.sheetmetal.LoftedFlangeBuilder

Deprecated.

Deprecated in NX10.0.0. Use Expression.setRightHandSide(java.lang.String) on the Expression object returned from Features.SheetMetal.LoftedFlangeBuilder#getThickness instead.

setThickness(String) - Method in interface nxopen.features.sheetmetal.TabBuilder

Deprecated.

Deprecated in NX10.0.0. Use Expression.setRightHandSide(java.lang.String) on the Expression object returned from TabBuilder.thickness() instead.

setThickness(double) - Method in interface nxopen.features.vehicledesign.ReflectionDataBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setThickness(boolean, String) - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign

Sets the thickness value string
License requirements: nx_flexible_pcb ("NX Flexible PCB")
.

setThickness(boolean, String) - Method in interface nxopen.preferences.PartSheetmetal

THE thickness value string
License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setThickness(double) - Method in interface nxopen.tooling.DieEngDieTipBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setThicknessChainEnabled(boolean) - Method in interface nxopen.features.FaceRecognitionBuilder

License requirements: gateway ("UG GATEWAY")
.

setThicknessDimensionType(AeroFlangeBuilder.ThicknessDimensionOptions) - Method in interface nxopen.features.AeroFlangeBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setThicknessDimensionType(AeroRibBuilder.ThicknessDimensionOptions) - Method in interface nxopen.features.AeroRibBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setThicknessDirection(Direction) - Method in interface nxopen.features.sheetmetal.FlexibleCableBuilder

Sets the thickness direction.

setThicknessDirection(StandardPartItemBuilder.Direction) - Method in interface nxopen.features.shipdesign.BracketBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setThicknessDirection(StandardPartItemBuilder.Direction) - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setThicknessDirection(ThicknessDirectionBuilder.ThicknessDirectionType) - Method in interface nxopen.features.shipdesign.ThicknessDirectionBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setThicknessDirectionOnReference(ThicknessDirectionBuilder.ThicknessDirectionType) - Method in interface nxopen.features.shipdesign.ThicknessDirectionBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setThicknessDirectionOption(DieDesPierceInsertBuilder.Direction) - Method in interface nxopen.tooling.DieDesPierceInsertBuilder

License requirements: ug_die_design ("Die Design")
.

setThicknessMode(IpwContainmentCurvesBuilder.ThicknessModeValue) - Method in interface nxopen.cam.IpwContainmentCurvesBuilder

License requirements: cam_base ("CAM BASE")
.

setThicknessOption(int) - Method in interface nxopen.features.shipdesign.PlateStockBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setThicknessOuterRatio(WeldAdvisorCustomerDefault, double) - Method in interface nxopen.weld.WeldAdvisorBuilder

The weld advisor parameter Thickness Outer Ratio
License requirements: ugweld ("UG WELD")
.

setThicknessOverride(boolean) - Method in interface nxopen.cae.LaminatePlyMaxThicknessVarBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setThicknessRatio(double) - Method in interface nxopen.features.MidSurfaceByFacePairsBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setThicknessRatio(WeldAdvisorCustomerDefault, double) - Method in interface nxopen.weld.WeldAdvisorBuilder

The weld advisor parameter Thickness Ratio
License requirements: ugweld ("UG WELD")
.

setThicknessSide(ContourFlangeBuilder.SectionSideOptions) - Method in interface nxopen.features.sheetmetal.ContourFlangeBuilder

Sets the thickness side of contour flange
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setThicknessSide(LoftedFlangeBuilder.SectionSideOptions) - Method in interface nxopen.features.sheetmetal.LoftedFlangeBuilder

Sets the thickness side of base lofted flange.

setThicknessSide(TabBuilder.ThicknessSideOptions) - Method in interface nxopen.features.sheetmetal.TabBuilder

Sets the sweep direction flag of tab
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setThicknessSourceOption(PlateStockBuilder.ThicknessSourceOptions) - Method in interface nxopen.features.shipdesign.PlateStockBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setThicknessState(ShellEADBuilder.State) - Method in interface nxopen.cae.ShellEADBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setThicknessStr(String) - Method in interface nxopen.features.shipdesign.PlateStockBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setThicknessType(TurnToolBuilder.ThicknessTypes) - Method in interface nxopen.cam.TurnToolBuilder

License requirements: None.

setThicknessType(DieEngDieTipBuilder.MaterialThicknessType) - Method in interface nxopen.tooling.DieEngDieTipBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setThicknessValue(double) - Method in interface nxopen.tooling.DieDesPierceInsertBuilder

License requirements: ug_die_design ("Die Design")
.

setThicknessVariationDownLimit(double) - Method in interface nxopen.cae.LaminateFillSetupBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setThicknessVariationDownLimit(double) - Method in interface nxopen.cae.LaminatePlyMaxThicknessVarBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setThicknessVariationUpLimit(double) - Method in interface nxopen.cae.LaminateFillSetupBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setThicknessVariationUpLimit(double) - Method in interface nxopen.cae.LaminatePlyMaxThicknessVarBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setThickWidth(double) - Method in interface nxopen.PrintBuilder

License requirements: None.

setThinFacets(CleanupFacetBodyBuilder.CleanupOptions) - Method in interface nxopen.facet.CleanupFacetBodyBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setThinWidth(double) - Method in interface nxopen.PrintBuilder

License requirements: None.

setThirdClearance(double) - Method in interface nxopen.tooling.SpecialFormingBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setThirdCut(int) - Method in interface nxopen.cam.DmStreamlineCutStep

License requirements: cam_base ("CAM BASE")
.

setThirdFaceEndParameter(double) - Method in interface nxopen.features.FaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setThirdFaceStartParameter(double) - Method in interface nxopen.features.FaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setThirdMargin(NXObject) - Method in interface nxopen.tooling.AutoDimensionBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setThirdScale(double) - Method in interface nxopen.motion.GeneralCouplerBuilder

Deprecated.

Deprecated in NX8.5.0. Obtion the exression using GeneralCouplerBuilder.thirdScaleExpression() to query or edit it.

setThirdType(GcouplerMovementTypes) - Method in interface nxopen.motion.GeneralCouplerBuilder

License requirements: mechanisms ("MECHANISMS")
.

setThreadDataSource(ThreadFeatureGeometry.ThreadDataSource) - Method in interface nxopen.cam.fbm.ThreadFeatureGeometry

Sets the source type for retrieving thread data
License requirements: cam_base ("CAM BASE")
.

setThreadDepthType(SearchModelViewBuilder.ValueComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder

License requirements: None.

setThreadDepthValue(double) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder

License requirements: None.

setThreadedEndChamferEnabled(boolean) - Method in interface nxopen.features.HolePackageBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setThreadedEndChamferEnabled(boolean) - Method in interface nxopen.geometricutilities.EndHoleData

License requirements: solid_modeling ("SOLIDS MODELING")
.

setThreadedHoles(boolean) - Method in interface nxopen.annotations.HoleTableSettingsHoleFiltersBuilder

License requirements: drafting ("DRAFTING")
.

setThreadedReliefEnabled(boolean) - Method in interface nxopen.features.HolePackageBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setThreadedReliefEnabled(boolean) - Method in interface nxopen.geometricutilities.EndHoleData

License requirements: solid_modeling ("SOLIDS MODELING")
.

setThreadedStartChamferEnabled(boolean) - Method in interface nxopen.features.HolePackageBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setThreadedStartChamferEnabled(boolean) - Method in interface nxopen.geometricutilities.EndHoleData

License requirements: solid_modeling ("SOLIDS MODELING")
.

setThreadHole(boolean) - Method in interface nxopen.tooling.ReusablePocketBuilder

License requirements: None.

setThreadHolePoint(NXObject) - Method in interface nxopen.cam.WedmBasedGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setThreadHolePointStatus(int) - Method in interface nxopen.cam.WedmBasedGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setThreadHolePointToolAxis(NXObject) - Method in interface nxopen.cam.WedmBasedGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setThreadLengthOption(HolePackageBuilder.ThreadLengthOptions) - Method in interface nxopen.features.HolePackageBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setThreadLengthOption(EndHoleData.ThreadLengthOptions) - Method in interface nxopen.geometricutilities.EndHoleData

License requirements: solid_modeling ("SOLIDS MODELING")
.

setThreadPerUnit(double) - Method in interface nxopen.cam.PitchSetting

License requirements: cam_base ("CAM BASE")
.

setThreadRotation(ThreadFeatureGeometry.Rotation) - Method in interface nxopen.cam.fbm.ThreadFeatureGeometry

License requirements: cam_base ("CAM BASE")
.

setThreadRotation(HolePackageBuilder.ThreadRotationOptions) - Method in interface nxopen.features.HolePackageBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setThreadRotation(EndHoleData.ThreadRotationOptions) - Method in interface nxopen.geometricutilities.EndHoleData

License requirements: solid_modeling ("SOLIDS MODELING")
.

setThreadSize(String) - Method in interface nxopen.features.HolePackageBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setThreadSize(String) - Method in interface nxopen.geometricutilities.EndHoleData

License requirements: solid_modeling ("SOLIDS MODELING")
.

setThreadSizeText(String) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder

License requirements: None.

setThreadSizeTextType(SearchModelViewBuilder.TextComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder

License requirements: None.

setThreadsStandardOptionData(int) - Method in interface nxopen.drawings.ThreadsViewStyle

Sets the threads standard option
License requirements: drafting ("DRAFTING")
.

setThreadsStandardOptionData(int) - Method in interface nxopen.preferences.ThreadsViewPreferences

Sets the threads standard option.

setThreadStandard(CustomViewSettingsBuilder.ThreadStandards) - Method in interface nxopen.drawings.CustomViewSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setThreadStandard(String) - Method in interface nxopen.features.HolePackageBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setThreeBlanks(boolean) - Method in interface nxopen.tooling.BlankLayoutBuilder

License requirements: None.

setThreePoints(Point, Point, Point, DatumPlaneBuilder.UseArcLength) - Method in interface nxopen.features.DatumPlaneBuilder

Sets three different points.

setThreshold(double) - Method in interface nxopen.motion.PackagingMeasureBuilder

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using PackagingMeasureBuilder.thresholdExpression() or PackagingMeasureBuilder.thresholdAngleExpression() to query or edit it.

setThreshold(double) - Method in interface nxopen.motion.SignalChartListItem

Deprecated.

Deprecated in NX8.5.0. Obtain the expression using Motion.SignalChartListItem#thresholdExpression to query or edit it.

setThresholdType(LaminateSpreadsheetReportBuilder.ThreshType) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setThresholdValue(double) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

License requirements: nx_lam_composites ("Laminate Composites")
.

setThroatOrientation(CartesianCoordinateSystem) - Method in interface nxopen.die.RotorBuilder

Sets the throat orientation of the rotor casting.

setThroatThickness(double) - Method in interface nxopen.weld.WeldBeadSizeBuilder

License requirements: ugweld ("UG WELD")
.

setThroatThickToggle(boolean) - Method in interface nxopen.weld.FilletBuilder

License requirements: ugweld ("UG WELD")
.

setThroughHoles(boolean) - Method in interface nxopen.annotations.HoleTableSettingsHoleFiltersBuilder

License requirements: drafting ("DRAFTING")
.

setThroughPoint(Point) - Method in interface nxopen.features.ParallelBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setThroughPoint(Point) - Method in interface nxopen.features.PerpendicularBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setThroughPoint(Point) - Method in interface nxopen.features.TangentBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setThroughPoint(Point) - Method in interface nxopen.geometricutilities.OnPathDimensionBuilder

License requirements: None.

setThroughPointLocation(Point) - Method in interface nxopen.features.shipdesign.StiffenerBySupportPathBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setThruFace(ISurface) - Method in interface nxopen.features.HoleFeatureBuilder

Sets thru face parameter for the hole.

setTicColor(int) - Method in interface nxopen.annotations.FrameBarElementStyleBuilder

License requirements: nx_ship_drafting ("Ship Drafting") OR drafting ("DRAFTING")
.

setTicDirection(ShipDraftingFramebarGeneralBuilder.TicDirectionTypes) - Method in interface nxopen.annotations.ShipDraftingFramebarGeneralBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setTicDisplay(int) - Method in interface nxopen.annotations.FrameBarElementStyleBuilder

License requirements: nx_ship_drafting ("Ship Drafting") OR drafting ("DRAFTING")
.

setTicFont(int) - Method in interface nxopen.annotations.FrameBarElementStyleBuilder

License requirements: nx_ship_drafting ("Ship Drafting") OR drafting ("DRAFTING")
.

setTicLabelTextOrientation(FrameBarElementStyleBuilder.LabelTextOrientation) - Method in interface nxopen.annotations.FrameBarElementStyleBuilder

License requirements: nx_ship_drafting ("Ship Drafting") OR drafting ("DRAFTING")
.

setTicLength(double) - Method in interface nxopen.annotations.FrameBarElementStyleBuilder

License requirements: nx_ship_drafting ("Ship Drafting") OR drafting ("DRAFTING")
.

setTicWidth(int) - Method in interface nxopen.annotations.FrameBarElementStyleBuilder

License requirements: nx_ship_drafting ("Ship Drafting") OR drafting ("DRAFTING")
.

setTightness(int) - Method in interface nxopen.features.shipdesign.EditStockBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setTightness(PlateBuilder.TightnessOptions) - Method in interface nxopen.features.shipdesign.PlateBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setTightness(int) - Method in interface nxopen.features.shipdesign.PlateSystemBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setTightness(int) - Method in interface nxopen.features.shipdesign.SubSystemBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setTiltAngle(double) - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder

License requirements: cam_base ("CAM BASE")
.

setTiltAngle(double) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTiltAngle(double) - Method in interface nxopen.cam.InterpolateVector

License requirements: cam_base ("CAM BASE")
.

setTiltAngle(double) - Method in interface nxopen.cam.ToolAxisAdvanced

License requirements: cam_base ("CAM BASE")
.

setTiltAngle(double) - Method in interface nxopen.cam.ToolAxisVariable

License requirements: cam_base ("CAM BASE")
.

setTiltAngle(double) - Method in interface nxopen.cam.ToolPathTiltTilting

License requirements: None.

setTiltAngleType(ToolAxisTilt.TiltAngleTypes) - Method in interface nxopen.cam.ToolAxisTilt

License requirements: cam_base ("CAM BASE")
.

setTiltClearanceAngle(double) - Method in interface nxopen.cam.ToolPathTiltClearance

License requirements: None.

setTiltingDistanceType(ToolPathTiltTilting.ToolAxisTiltingDistTypes) - Method in interface nxopen.cam.ToolPathTiltTilting

License requirements: None.

setTiltingDriveCurve(TaggedObject[]) - Method in interface nxopen.cam.ToolPathTiltTilting

The tilting drive curve
License requirements: None.

setTiltingDrivePoint(TaggedObject) - Method in interface nxopen.cam.ToolPathTiltTilting

License requirements: None.

setTiltingRotationAngle(double) - Method in interface nxopen.cam.ToolPathTiltTilting

License requirements: None.

setTiltingRuleType(ToolPathTiltTilting.ToolAxisTiltingRuleTypes) - Method in interface nxopen.cam.ToolPathTiltTilting

License requirements: None.

setTime(double) - Method in interface nxopen.cam.CutDwell

License requirements: cam_base ("CAM BASE")
.

setTime(double) - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder

License requirements: cam_base ("CAM BASE")
.

setTime(String) - Method in interface nxopen.DateItemBuilder

License requirements: None.

setTime(double) - Method in interface nxopen.motion.MotionSolutionBuilder

Deprecated.

Deprecated in NX8.5.0. Obtion the exression using MotionSolutionBuilder.timeExpression() to query or edit it.

setTimeAttribute(String, String) - Method in interface nxopen.NXObject

Deprecated.

Deprecated in NX8.0.0. Use NXObject.setUserAttribute(nxopen.NXObject.AttributeInformation, nxopen.Update.Option) instead.

setTimeAttribute(String, String, Update.Option) - Method in interface nxopen.NXObject

Deprecated.

Deprecated in NX8.0.0. Use NXObject.setUserAttribute(nxopen.NXObject.AttributeInformation, nxopen.Update.Option) instead.

setTimeDuration(double) - Method in interface nxopen.cae.responsesimulation.CombinationEvaluationOptions

License requirements: nx_response_anlys ("NX Response Analysis")
.

setTimeEstimate(double) - Method in interface nxopen.cam.WorkInstructionBuilder

License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.

setTimeExtents(DurabilityDataControlBuilder.TimeExtentsEnum) - Method in interface nxopen.cae.DurabilityDataControlBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setTimeFormatType(TableCellStyleBuilder.TimeFormatTypes) - Method in interface nxopen.annotations.TableCellStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setTimeLimit(double) - Method in interface nxopen.cam.ToolPathDivideBuilder

License requirements: None.

setTimeOfStep(Tag, double) - Method in interface nxopen.uf.UFAssem

Refer to UF_ASSEM_set_time_of_step for documentation.

setTimePropsFromConditionSequence(SimConditionSequence) - Method in interface nxopen.cae.SimSolution

Set the time properties for this solution based on the given condition sequences
License requirements: nx_masterfem ("Finite Element Modeling")
.

setTimePropsFromConditionSequence(SimConditionSequence, int) - Method in interface nxopen.cae.SimSolution

Set the time properties for this solution based on the given condition sequences and number of integration steps
License requirements: nx_masterfem ("Finite Element Modeling")
.

setTimePropsFromConditionSequence(SimConditionSequence, double, Unit) - Method in interface nxopen.cae.SimSolution

Set the time properties for this solution based on the given condition sequences and integration step size
License requirements: nx_masterfem ("Finite Element Modeling")
.

setTimes(int) - Method in interface nxopen.cam.Cycle

License requirements: cam_base ("CAM BASE")
.

setTimeScaleFactor(double) - Method in interface nxopen.mechatronics.PreferencesBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setTimeSensor(SignalChartListItem.Timer) - Method in interface nxopen.motion.SignalChartListItem

License requirements: nx_motion_motor ("NX Motion Motor")
.

setTimesStatus(boolean) - Method in interface nxopen.cam.Cycle

License requirements: cam_base ("CAM BASE")
.

setTimeStamp(int) - Method in interface nxopen.routing.DesignRuleOverride

Sets the time stamp of the design rule override is returned
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setTimeStamp(int) - Method in interface nxopen.routing.DesignRuleViolation

Sets the date/time stamp of the violation is inquired
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setTimeStatistics(boolean) - Method in interface nxopen.motion.TirePropertyCdBuilder

License requirements: mechanisms ("MECHANISMS")
.

setTimeStringFormat(String) - Method in interface nxopen.uf.UFAttr

Refer to UF_ATTR_set_time_string_format for documentation.

setTimeUnits(Unit) - Method in interface nxopen.cae.SimConditionSequence

Sets the time units for the whole sequence
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setTimeUserAttribute(String, int, String, Update.Option) - Method in interface nxopen.NXObject

Creates or modifies a time attribute with the option to update or not.

setTimeUserAttribute(String, int, NXObject.ComputationalTime, Update.Option) - Method in interface nxopen.NXObject

Creates or modifies a time attribute with the option to update or not.

setTimeValue(double) - Method in interface nxopen.cae.AfuZHeaderInfo

Sets the value of time field
License requirements: nx_ftk ("NX Advanced Graphing")
.

settingChanged() - Method in interface nxopen.routing.LinearPathBuilder

Notifies the builder that some routing preferences have changed, and that the builder (and it's associated builders) must update their values to refelect those changes.

settings() - Method in interface nxopen.annotations.BaseCenterline3dBuilder

Returns the settings builder
License requirements: None.

settings() - Method in interface nxopen.annotations.BaseCenterMarkBuilder

Returns the center mark settings builder
License requirements: None.

settings() - Method in interface nxopen.annotations.Centerline2dBuilder

Returns the settings builder
License requirements: drafting ("DRAFTING")
.

settings() - Method in interface nxopen.annotations.CircleCenterlineBuilder

Returns the settings builder object for the centerline
License requirements: None.

settings() - Method in interface nxopen.annotations.SymmetricalCenterlineBuilder

Returns the settings builder object for Symmetrical Centerline
License requirements: None.

settings() - Method in interface nxopen.drawings.SketchSectionLineBuilder

Returns the settings
License requirements: None.

settings() - Method in interface nxopen.layout2d.AssemblyFromLayout2dBuilder

Returns the settings of the assembly creation
License requirements: None.

settings() - Method in interface nxopen.layout2d.CreateComponentFrom3DBuilder

Returns the settings of create component from 3D
License requirements: None.

settings() - Method in interface nxopen.layout2d.InsertComponentBuilder

Returns the Component settings block builder which holds the component settings builder
License requirements: None.

settingsBuilder() - Method in interface nxopen.drawings.ConvertDraftingContentsBuilder

Returns the settings
License requirements: None.

SettingsBuilder - Interface in nxopen.drawings

Represents a Drawings.SettingsBuilder .

settingsChanged() - Method in interface nxopen.routing.PathStockBuilder

Notify the builder that the Routing preferred stock has been modified.

settingsFile() - Method in interface nxopen.AcisExporter

Returns the settings file - The definition file to read default options
License requirements: None.

settingsFile() - Method in interface nxopen.AcisImporter

Returns the settings file - definition file for default options
License requirements: None.

settingsFile() - Method in interface nxopen.annotations.ImportAutocadBlockBuilder

Returns the AutoCAD setting file
License requirements: nx_layout ("NX Layout")
.

settingsFile() - Method in interface nxopen.Catiav4Creator

Returns the settings file - The definition file to read default options
License requirements: None.

settingsFile() - Method in interface nxopen.Catiav4Importer

Returns the settings file - definition file for default settings
License requirements: None.

settingsFile() - Method in interface nxopen.Catiav5Creator

Returns the settings file - The definition file to read default options
License requirements: None.

settingsFile() - Method in interface nxopen.Catiav5Importer

Returns the settings file - definition file for default options
License requirements: None.

settingsFile() - Method in interface nxopen.DxfdwgCreator

Returns the settings file - The definition file to read default options
License requirements: None.

settingsFile() - Method in interface nxopen.DxfdwgImporter

Returns the SettingsFile command - definition file for default options
License requirements: None.

settingsFile() - Method in interface nxopen.IgesCreator

Returns the Settings File to read the default settings
License requirements: None.

settingsFile() - Method in interface nxopen.IgesImporter

Returns the settings file - definition file for default options
License requirements: None.

settingsFile() - Method in interface nxopen.ProeImporter

Returns the settings file - definition file for default options
License requirements: None.

settingsFile() - Method in interface nxopen.Step203Creator

Deprecated.

Deprecated in NX11.0.0. Use StepCreator instead.

settingsFile() - Method in interface nxopen.Step203Importer

Returns the settings file - definition file for default options
License requirements: None.

settingsFile() - Method in interface nxopen.Step214Creator

Deprecated.

Deprecated in NX11.0.0. Use StepCreator instead.

settingsFile() - Method in interface nxopen.Step214Importer

Returns the settings file - definition file for default options
License requirements: None.

settingsFile() - Method in interface nxopen.Step242Importer

Returns the settings file - definition file for default options
License requirements: None.

settingsFile() - Method in interface nxopen.StepCreator

Returns the Settings File to read the default settings
License requirements: None.

SettingsManager - Interface in nxopen.drafting

Represents an object that manages drafting settings.

settingsManager() - Method in interface nxopen.Part

Returns the SettingsManager for part .

settingsOrigination() - Method in interface nxopen.drawings.GeneralWorkFlowBuilder

Returns the option that indicates the settings origination
License requirements: None.

settingsToggle() - Method in interface nxopen.features.MapleBuilder

Returns the settings toggle
License requirements: None.

settingWithoutFalseBody() - Method in interface nxopen.tooling.GeneralInsertBuilder

Returns the setting without false body
License requirements: None.

settingWithoutFalseBody() - Method in interface nxopen.tooling.PiercingInsertBuilder

Returns the option of whether to create false body for die or backing insert.

setTipAngle(String) - Method in interface nxopen.features.HoleFeatureBuilder

Sets the tip angle of the hole.

setTipAngle(double) - Method in interface nxopen.tooling.CoolingExtendBuilder

License requirements: None.

setTipAngleMode(InspectionMoveBuilder.TipAngleTypes) - Method in interface nxopen.cam.InspectionCreatePathsBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTipAngleMode(InspectionMoveBuilder.TipAngleTypes) - Method in interface nxopen.cam.InspectionMoveBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTipEndType(CoolingDefineChannelBuilder.TipEndTypes) - Method in interface nxopen.tooling.CoolingDefineChannelBuilder

License requirements: ug_mold_design ("UG MOLD")
.

setTipEndType(CoolingExtendBuilder.TipEndTypes) - Method in interface nxopen.tooling.CoolingExtendBuilder

License requirements: ug_mold_design ("UG MOLD")
.

setTipMode(InspectionMoveBuilder.TipModeTypes) - Method in interface nxopen.cam.InspectionCreatePathsBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTipMode(InspectionMoveBuilder.TipModeTypes) - Method in interface nxopen.cam.InspectionMoveBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTipNumber(int) - Method in interface nxopen.cam.InspectionCreatePathsBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTipNumber(int) - Method in interface nxopen.cam.InspectionMoveBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTipNumber(int) - Method in interface nxopen.cam.InspectionSensorBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTipNumber(int) - Method in interface nxopen.cam.InspectionSensorMassEditBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTippedProduct(Feature) - Method in interface nxopen.die.FillBuilder

Sets the tipped product of the area fill
License requirements: die_engineering ("DIE ENGINEERING")
.

setTippedProduct(Feature) - Method in interface nxopen.die.FlangeTaskBuilder

Sets the tipped product of the flange task
License requirements: die_engineering ("DIE ENGINEERING")
.

setTippedProduct(Feature) - Method in interface nxopen.die.FormTaskBuilder

Sets the tipped product of the form task.

setTippedProduct(Feature) - Method in interface nxopen.die.PierceTaskBuilder

Sets the tipped product of the pierce task
License requirements: die_engineering ("DIE ENGINEERING")
.

setTippedProduct(Feature) - Method in interface nxopen.die.TrimTaskBuilder

Sets the tipped product of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.

setTipString(String) - Method in interface nxopen.cam.InspectionCreatePathsBuilder

Deprecated.

Deprecated in NX9.0.0. Use TipNumber instead.

setTipString(String) - Method in interface nxopen.cam.InspectionLinkPmiBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTipType(InspectionProbeTrackingBuilder.TipTypes) - Method in interface nxopen.cam.InspectionProbeTrackingBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTireBodyOutputFileName(String) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setTireControlFile(String) - Method in interface nxopen.motion.TirePropertyCdBuilder

License requirements: mechanisms ("MECHANISMS")
.

setTireDefinition(TireEnvelopeBuilder.TireDefinitionOption) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setTireProfileSketch(String, String) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

Set the sketch containing the tire profiles by the given part name and sketch name.

setTireProfileSketch(Sketch) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

Set the sketch containing the tire profiles by the given sketch object.

setTireSide(TirePropertyTnoBuilder.TireSideType) - Method in interface nxopen.motion.TirePropertyTnoBuilder

License requirements: mechanisms ("MECHANISMS")
.

setTireType(TireBuilder.Type) - Method in interface nxopen.motion.TireBuilder

License requirements: mechanisms ("MECHANISMS")
.

setTitle(String) - Method in interface nxopen.annotations.BalloonNoteBuilder

License requirements: None.

setTitle(String) - Method in interface nxopen.annotations.BusinessModifier

Sets the title
License requirements: geometric_tol ("GDT")
.

setTitle(String) - Method in interface nxopen.annotations.CompanyProprietaryInformationBuilder

License requirements: None.

setTitle(String) - Method in interface nxopen.annotations.CoordinateNoteBuilder

License requirements: None.

setTitle(String) - Method in interface nxopen.annotations.CustomerValueBusinessModifierBuilder

License requirements: geometric_tol ("GDT")
.

setTitle(String) - Method in interface nxopen.annotations.EnterpriseIdentificationBuilder

License requirements: None.

setTitle(String) - Method in interface nxopen.annotations.ExportControlBuilder

License requirements: None.

setTitle(String) - Method in interface nxopen.annotations.FeatureIdBusinessModifierBuilder

License requirements: geometric_tol ("GDT")
.

setTitle(String) - Method in interface nxopen.annotations.GeneralNoteBuilder

License requirements: None.

setTitle(String) - Method in interface nxopen.annotations.GovernmentSecurityInformationBuilder

License requirements: None.

setTitle(String) - Method in interface nxopen.annotations.LocatorDesignatorBuilder

License requirements: None.

setTitle(String) - Method in interface nxopen.annotations.MaterialSpecificationBuilder

License requirements: None.

setTitle(String) - Method in interface nxopen.annotations.PartIdentificationBuilder

License requirements: None.

setTitle(String) - Method in interface nxopen.annotations.PmiIntegerBuilder

License requirements: None.

setTitle(String) - Method in interface nxopen.annotations.PmiNumberBuilder

License requirements: None.

setTitle(String) - Method in interface nxopen.annotations.PmiStringBuilder

License requirements: None.

setTitle(String) - Method in interface nxopen.annotations.PmiUrlNoteBuilder

License requirements: None.

setTitle(String) - Method in interface nxopen.annotations.PmiUserDefinedBuilder

License requirements: None.

setTitle(String) - Method in interface nxopen.annotations.ProcessSpecificationBuilder

License requirements: None.

setTitle(String) - Method in interface nxopen.annotations.RevisionBusinessModifierBuilder

License requirements: geometric_tol ("GDT")
.

setTitle(String) - Method in interface nxopen.annotations.SafetyClassBusinessModifierBuilder

License requirements: geometric_tol ("GDT")
.

setTitle(String) - Method in interface nxopen.annotations.SpecificNoteBuilder

License requirements: None.

setTitle(String) - Method in interface nxopen.annotations.SurfaceFinishBuilder

License requirements: None.

setTitle(String) - Method in interface nxopen.annotations.UrlBusinessModifierBuilder

License requirements: geometric_tol ("GDT")
.

setTitle(String) - Method in interface nxopen.AttributePropertiesBaseBuilder

License requirements: None.

setTitle(String) - Method in interface nxopen.AttributeTemplatesBuilder

License requirements: None.

setTitle(String) - Method in interface nxopen.cae.CorrelSolutionBuilder

License requirements: nx_correl_base ("FE Correlation")
.

setTitle(String) - Method in interface nxopen.drafting.AttributeItemBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setTitle(String) - Method in interface nxopen.issue.IssueContent

License requirements: nx_issue_mgmt ("NX Issue Tracking")
.

setTitle(String) - Method in interface nxopen.issue.IssueContentBuilder

License requirements: nx_issue_mgmt ("NX Issue Tracking")
.

setTitle(String) - Method in interface nxopen.pdm.EffectivityAttributePropertiesBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setTitle(String) - Method in interface nxopen.routing.RoutePartDescriptor

License requirements: routing_base ("Routing Basic")
.

setTitle(String) - Method in interface nxopen.shipdesign.NavigatorNode

License requirements: nx_ship_basic ("Ship Basic Design")
.

setTitle(String) - Method in interface nxopen.uistyler.DialogItem

Specifies a string to display on the top border of the dialog
License requirements: None.

setTitleBlockAlignmentPosition(DrawingFormatTitleBuilder.TitleBlockPositionType) - Method in interface nxopen.annotations.DrawingFormatTitleBuilder

License requirements: drafting ("DRAFTING")
.

setTitleVisibility(boolean) - Method in interface nxopen.blockstyler.DoubleBlock

License requirements: None.

setTitleVisibility(boolean) - Method in interface nxopen.blockstyler.IntegerBlock

License requirements: None.

setTlAdjReg(int) - Method in interface nxopen.cam.TrackpointBuilder

License requirements: cam_base ("CAM BASE")
.

setTlaxisBladeRollAngle(double) - Method in interface nxopen.cam.MillCutParameters

License requirements: cam_base ("CAM BASE")
.

setTlCoolantThro(boolean) - Method in interface nxopen.cam.DrillToolBuilder

License requirements: None.

setTlCtlgNum(String) - Method in interface nxopen.cam.ToolBuilder

License requirements: None.

setTlCutcomReg(int) - Method in interface nxopen.cam.MillingToolBuilder

License requirements: None.

setTlCutcomReg(int) - Method in interface nxopen.cam.TrackpointBuilder

License requirements: cam_base ("CAM BASE")
.

setTlDescription(String) - Method in interface nxopen.cam.ToolBuilder

License requirements: None.

setTlDesignation(String) - Method in interface nxopen.cam.DrillToolBuilder

License requirements: None.

setTlDiameter(double) - Method in interface nxopen.cam.FlowBuilder

License requirements: cam_base ("CAM BASE")
.

setTlDirection(MillingToolBuilder.ToolDirectionTypes) - Method in interface nxopen.cam.MillingToolBuilder

License requirements: None.

setTlFormType(DrillThreadMillToolBuilder.ToolFormTypeTypes) - Method in interface nxopen.cam.DrillThreadMillToolBuilder

License requirements: None.

setTlHolderDescription(String) - Method in interface nxopen.cam.MillingToolBuilder

License requirements: None.

setTlHolderLibref(String) - Method in interface nxopen.cam.MillingToolBuilder

License requirements: None.

setTlLibref(String) - Method in interface nxopen.cam.ToolBuilder

License requirements: None.

setTlManualToolChange(boolean) - Method in interface nxopen.cam.ToolBuilder

License requirements: None.

setTlMountingJunction(NXObject) - Method in interface nxopen.cam.SolidToolBuilder

License requirements: None.

setTlTapHolderType(DrillTapToolBuilder.ToolTapHolderTypeTypes) - Method in interface nxopen.cam.DrillTapToolBuilder

License requirements: None.

setTlText(String) - Method in interface nxopen.cam.ToolBuilder

License requirements: None.

setTlThreadFormMethod(DrillTapToolBuilder.ToolThreadFormMethodTypes) - Method in interface nxopen.cam.DrillTapToolBuilder

License requirements: None.

setTnoFile(String) - Method in interface nxopen.motion.TirePropertyTnoBuilder

License requirements: mechanisms ("MECHANISMS")
.

setTo(ISurface) - Method in interface nxopen.features.sheetmetal.NormalCutoutBuilder

Sets the face or datum plane at which the cutout ends.

setToBeDeleted(boolean) - Method in interface nxopen.features.shipdesign.ShipPreparationInfo

License requirements: nx_ship_basic ("Ship Basic Design")
.

setToBeDeleted(boolean) - Method in interface nxopen.weld.WeldFillStripBuilder

License requirements: None.

setToClipboard(boolean) - Method in interface nxopen.gateway.CopyCutBuilder

License requirements: None.

setToCreateStandalonePlot(boolean) - Method in interface nxopen.cae.xyplot.PlotParameters

License requirements: None.

setToCsys(CoordinateSystem) - Method in interface nxopen.features.sheetmetal.SolidPunchBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal") OR sheet_metal_design ("SHEET METAL DESIGN")
.

setToCsys(CoordinateSystem) - Method in interface nxopen.geometricutilities.ModlMotion

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setToCSYS(CoordinateSystem) - Method in interface nxopen.geometricutilities.PatternOrientation

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setToe(double) - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setToe(double) - Method in interface nxopen.features.vehicledesign.BaseDataWheelBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setToFunction(Excitation, Excitation.Component) - Method in interface nxopen.cae.responsesimulation.CSDExcitationBuilder

Sets the to function
License requirements: nx_response_anlys ("NX Response Analysis")
.

setTogBlank(boolean) - Method in interface nxopen.formboard.FaceAnnotationBuilder

License requirements: routing_harness ("Routing Harness")
.

setToggle(boolean) - Method in interface nxopen.cam.MultiDepthCut

License requirements: cam_base ("CAM BASE")
.

setToggleBlankComponentsWithAttribute(boolean) - Method in interface nxopen.tooling.AssemblyDrawingBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setToggleCreateSkipWelds(boolean) - Method in interface nxopen.weld.FilletBuilder

License requirements: ugweld ("UG WELD")
.

setToggleEqualSpacing(boolean) - Method in interface nxopen.features.shipdesign.SteelVentHolesBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setToggleI(boolean) - Method in interface nxopen.annotations.CoordinateNoteBuilder

License requirements: None.

setToggleJ(boolean) - Method in interface nxopen.annotations.CoordinateNoteBuilder

License requirements: None.

setToggleK(boolean) - Method in interface nxopen.annotations.CoordinateNoteBuilder

License requirements: None.

setToggleLabel(boolean) - Method in interface nxopen.annotations.CoordinateNoteBuilder

License requirements: None.

setToggleLevel(boolean) - Method in interface nxopen.annotations.CoordinateNoteBuilder

License requirements: None.

setToggleListDependents(boolean) - Method in interface nxopen.tooling.AssemblyDrawingBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setToggleListDependents(boolean) - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setToggleLongName(boolean) - Method in interface nxopen.mechatronics.GanttExportPLCopenBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setToggleRecreateDeletedWelds(boolean) - Method in interface nxopen.weld.FilletBuilder

License requirements: ugweld ("UG WELD")
.

setToggleShowOnly(boolean) - Method in interface nxopen.tooling.AssemblyDrawingBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setToggleSideArea(boolean) - Method in interface nxopen.tooling.CalculateAreaBuilder

License requirements: None.

setToggleState(int, UFMb.State) - Method in interface nxopen.uf.UFMb

Refer to UF_MB_set_toggle_state for documentation.

setToggleStatus(MenuButton.Toggle) - Method in interface nxopen.menubar.MenuButton

Sets the toggle status of the button.

setToggleSymmetricOffset(boolean) - Method in interface nxopen.features.shipdesign.SteelVentHolesBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setToggleSymmetricOffsets(boolean) - Method in interface nxopen.features.shipdesign.VentilationHoles2Builder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setToggleX(boolean) - Method in interface nxopen.annotations.CoordinateNoteBuilder

License requirements: None.

setToggleY(boolean) - Method in interface nxopen.annotations.CoordinateNoteBuilder

License requirements: None.

setToggleZ(boolean) - Method in interface nxopen.annotations.CoordinateNoteBuilder

License requirements: None.

setTOIndex(int) - Method in interface nxopen.sim.KinematicSinumerikCaBuilder

License requirements: nx_sinumerik_ca ("Sinumerik Collision Avoidance")
.

setTolDisplayActDRF(boolean) - Method in interface nxopen.cam.InspectionMeasDataBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTolDisplayDesDRF(boolean) - Method in interface nxopen.cam.InspectionMeasDataBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTolDisplayDesPoints(boolean) - Method in interface nxopen.cam.InspectionMeasDataBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTolDisplayGauge(boolean) - Method in interface nxopen.cam.InspectionMeasDataBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTolDisplayMeaPoints(boolean) - Method in interface nxopen.cam.InspectionMeasDataBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTolDisplayNeedles(boolean) - Method in interface nxopen.cam.InspectionMeasDataBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTolDisplayPoints(boolean) - Method in interface nxopen.cam.InspectionMeasDataBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTolDisplayReconstruct(boolean) - Method in interface nxopen.cam.InspectionMeasDataBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTolerance(double) - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder

License requirements: drafting ("DRAFTING")
.

setTolerance(Value) - Method in interface nxopen.annotations.FcfFrame

Deprecated.

Deprecated in NX10.0.0. Use FeatureControlFrameDataBuilder.toleranceValue() and FeatureControlFrameDataBuilder.setToleranceValue(java.lang.String) instead.

setTolerance(double) - Method in interface nxopen.annotations.HatchBuilder

Deprecated.

Deprecated in NX7.5.0. Use HatchFillSettingsBuilder instead.

setTolerance(double) - Method in interface nxopen.annotations.HatchFillSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setTolerance(double) - Method in interface nxopen.annotations.HatchStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setTolerance(AngularTolerance) - Method in interface nxopen.annotations.IAngularTolerance

Sets the tolerance.

setTolerance(LinearTolerance) - Method in interface nxopen.annotations.ILinearTolerance

Sets the tolerance.

setTolerance(double) - Method in interface nxopen.annotations.SurfaceFinishBuilder

License requirements: None.

setTolerance(double) - Method in interface nxopen.cae.NodeProjectBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setTolerance(double) - Method in interface nxopen.cam.ProbeToleranceParametersBuilder

License requirements: None.

setTolerance(double) - Method in interface nxopen.display.SelPref

License requirements: None.

setTolerance(double) - Method in interface nxopen.drawings.GeneralViewStyle

Sets the value of tolerance, that specifies a chord height tolerance value for silhouette and hidden line generation in a given drawing view.

setTolerance(double) - Method in interface nxopen.drawings.ViewCreationWizardBuilder

License requirements: drafting ("DRAFTING")
.

setTolerance(GeneralToleranceOption) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder

License requirements: drafting ("DRAFTING")
.

setTolerance(boolean) - Method in interface nxopen.drawings.ViewStyleSmoothEdgesBuilder

License requirements: drafting ("DRAFTING")
.

setTolerance(double) - Method in interface nxopen.facet.DecimateFacetBodyBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setTolerance(double) - Method in interface nxopen.facet.MultiPatchAlignmentBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setTolerance(double) - Method in interface nxopen.features.BooleanBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setTolerance(double) - Method in interface nxopen.features.BridgeCurveBuilder

Deprecated.

Deprecated in NX8.5.0. Use BridgeCurveBuilderEx instead.

setTolerance(double) - Method in interface nxopen.features.ChamferBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setTolerance(double) - Method in interface nxopen.features.CompositeCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setTolerance(double) - Method in interface nxopen.features.DividefaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setTolerance(double) - Method in interface nxopen.features.DraftBodyBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setTolerance(double) - Method in interface nxopen.features.EdgeBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setTolerance(double) - Method in interface nxopen.features.EmbossBuilder

Sets the distance tolerance
License requirements: solid_modeling ("SOLIDS MODELING")
.

setTolerance(double) - Method in interface nxopen.features.ExtensionBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setTolerance(double) - Method in interface nxopen.features.FaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setTolerance(double) - Method in interface nxopen.features.FillHoleBuilder

License requirements: nx_freeform_1 ("basic freeform modeling"), solid_modeling ("SOLIDS MODELING")
.

setTolerance(double) - Method in interface nxopen.features.FitCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setTolerance(double) - Method in interface nxopen.features.FlowBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setTolerance(double) - Method in interface nxopen.features.HolePackageBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setTolerance(double) - Method in interface nxopen.features.IntersectionCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setTolerance(double) - Method in interface nxopen.features.OffsetCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setTolerance(double) - Method in interface nxopen.features.OffsetSurfaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setTolerance(double) - Method in interface nxopen.features.PatchBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setTolerance(double) - Method in interface nxopen.features.ProjectCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setTolerance(double) - Method in interface nxopen.features.RevolveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setTolerance(double) - Method in interface nxopen.features.SectionCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setTolerance(double) - Method in interface nxopen.features.SewBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setTolerance(double) - Method in interface nxopen.features.ShellBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setTolerance(double) - Method in interface nxopen.features.shipdesign.ExpansionDrawingBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setTolerance(double) - Method in interface nxopen.features.shipdesign.MarkingLineBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setTolerance(double) - Method in interface nxopen.features.shipdesign.ShellExpansionBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setTolerance(double) - Method in interface nxopen.features.SplitBodyBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setTolerance(double) - Method in interface nxopen.features.ThickenBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setTolerance(double) - Method in interface nxopen.features.TrimBody2Builder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setTolerance(double) - Method in interface nxopen.features.TrimExtendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setTolerance(double) - Method in interface nxopen.features.TrimSheetBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setTolerance(double) - Method in interface nxopen.features.TubeBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setTolerance(double) - Method in interface nxopen.geometricutilities.CurveFitData

License requirements: None.

setTolerance(double) - Method in interface nxopen.geometricutilities.RefitControlBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setTolerance(double) - Method in interface nxopen.mechatronics.PreferencesBuilder

Deprecated.

Deprecated in NX9.0.0. This functionality is no longer supported.

setTolerance(double) - Method in interface nxopen.motion.PackagingMeasureBuilder

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using PackagingMeasureBuilder.toleranceExpression() or PackagingMeasureBuilder.toleranceAngleExpression() to query or edit it.

setTolerance(double) - Method in interface nxopen.PlotBuilder

License requirements: None.

setTolerance(double) - Method in interface nxopen.preferences.GeneralViewPreferences

Sets the value of tolerance that specifies a chord height tolerance value for silhouette and hidden line generation in a given drawing view.

setTolerance(double) - Method in interface nxopen.preferences.SessionNXGateway

Sets the tolerance.

setTolerance(double) - Method in interface nxopen.routing.ConnectPathBuilder

License requirements: routing_base ("Routing Basic")
.

setTolerance(double) - Method in interface nxopen.SketchOffsetBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setTolerance(double) - Method in interface nxopen.SketchProjectBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setTolerance(AutoDimensionBuilder.ToleranceType) - Method in interface nxopen.tooling.AutoDimensionBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setTolerance(double) - Method in interface nxopen.tooling.EdgePatchBuilder

Set the tolerance value.

setTolerance(double) - Method in interface nxopen.tooling.FaceSplitBuilder

License requirements: None.

setTolerance(float) - Method in interface nxopen.uf.UFDrf

Refer to UF_DRF_set_tolerance for documentation.

setToleranceAngularFormat(AngularDimensionFormat) - Method in interface nxopen.annotations.UnitsStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setToleranceCharacterSize(double) - Method in interface nxopen.tooling.AutoDimensionBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setToleranceCoefficient(double) - Method in interface nxopen.tooling.DieDesPierceInsertBuilder

License requirements: ug_die_design ("Die Design")
.

setToleranceColor(NXColor) - Method in interface nxopen.tooling.AutoDimensionBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setToleranceCrosshatch(double) - Method in interface nxopen.annotations.LightweightSectionBuilder

License requirements: geometric_tol ("GDT")
.

setToleranceDecimalPlaces(int) - Method in interface nxopen.annotations.Dimension

Sets a setting to control the number of decimal places for the primary tolerance value of a dimension.

setToleranceDetail(boolean) - Method in interface nxopen.cam.InspectionAnalyzeOutputBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setToleranceDistance(double) - Method in interface nxopen.cae.FaceFaceImprintBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setToleranceLeadingZero(boolean) - Method in interface nxopen.annotations.UnitsFormatPreferences

Sets the tolerance leading zero display property
License requirements: None.

setToleranceLowerValue(double) - Method in interface nxopen.tooling.AutoDimensionBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setToleranceMarkup(boolean) - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder

License requirements: gateway ("UG GATEWAY")
.

setToleranceMCMType(SearchCriteriaFeatureControlFrameBuilder.ToleranceMCMOptions) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

License requirements: None.

setToleranceName(String) - Method in interface nxopen.cam.InspectionAnalyzeBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setToleranceNxTextCharacterSpaceFactor(double) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setToleranceOffset(RoughFinishTurningBuilder.ToleranceOffsetTypes) - Method in interface nxopen.cam.RoughFinishTurningBuilder

License requirements: cam_base ("CAM BASE")
.

setToleranceOffsetMode(TurnFeatureGeomBuilder.ToleranceOffsetModes) - Method in interface nxopen.cam.TurnFeatureGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setTolerancePercent(double) - Method in interface nxopen.cam.ToolPathDivideBuilder

License requirements: None.

setTolerancePlacement(TolerancePlacement) - Method in interface nxopen.annotations.UnitsFormatPreferences

Sets the tolerance text placement relative to the dimension text
License requirements: None.

setTolerances(double[]) - Method in interface nxopen.features.MeshSurfaceBuilder

Set tolerances for mesh type surfaces.

setTolerances(double[]) - Method in interface nxopen.SurfaceRebuildData

Set surface rebubild tolerances.

setToleranceStandardTextCharacterSpaceFactor(double) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setToleranceString(String[]) - Method in interface nxopen.features.MeshSurfaceBuilder

Set tolerances strings for mesh type surface.

setToleranceSummary(boolean) - Method in interface nxopen.cam.InspectionAnalyzeOutputBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setToleranceText(Lettering) - Method in interface nxopen.annotations.LetteringPreferences

Sets the tolerance text
License requirements: None.

setToleranceText(String) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

License requirements: None.

setToleranceTextAspectRatio(double) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setToleranceTextCharSpaceFactor(double) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setToleranceTextColor(NXColor) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setToleranceTextFont(int) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setToleranceTextItalicized(boolean) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setToleranceTextLineSpaceFactor(double) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setToleranceTextLineWidth(LineWidth) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setToleranceTextSize(double) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setToleranceTextSpaceFactor(double) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setToleranceTextSymbolAspectRatio(double) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setToleranceTextType(SearchModelViewBuilder.TextComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

License requirements: None.

setToleranceType(ToleranceType) - Method in interface nxopen.annotations.AngularTolerance

Sets the tolerance type
License requirements: None.

setToleranceType(ToleranceType) - Method in interface nxopen.annotations.Dimension

Sets a setting to control the tolerance display style.

setToleranceType(ToleranceType) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setToleranceType(BaseSurfaceFinishBuilder.ToleranceOption) - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder

License requirements: drafting ("DRAFTING")
.

setToleranceType(ToleranceType) - Method in interface nxopen.annotations.LinearTolerance

Sets the tolerance type
License requirements: None.

setToleranceType(SearchCriteriaDimensionBuilder.ToleranceTypes) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder

License requirements: None.

setToleranceType(SearchModelViewBuilder.ValueComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder

License requirements: None.

setToleranceType(BaseSurfaceFinishBuilder.ToleranceOption) - Method in interface nxopen.annotations.SurfaceFinishBuilder

License requirements: None.

setToleranceUpperValue(double) - Method in interface nxopen.tooling.AutoDimensionBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setToleranceValue(String) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setToleranceValue(double) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder

License requirements: None.

setToleranceValue(double) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder

License requirements: drafting ("DRAFTING")
.

setToleranceValue(double) - Method in interface nxopen.drawings.ViewStyleSmoothEdgesBuilder

License requirements: drafting ("DRAFTING")
.

setToleranceValue(double) - Method in interface nxopen.tooling.AutoDimensionBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setToleranceValuePrecision(int) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setToleranceValues(double, double, double, double) - Method in interface nxopen.features.ExtrudeBuilder

SET all the tolerances at once
License requirements: solid_modeling ("SOLIDS MODELING")
.

setToleranceValueSource(InspectionToleranceOperationBuilder.ToleranceSource) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setToleranceZoneShape(ToleranceZoneShape) - Method in interface nxopen.annotations.FcfFrame

Deprecated.

Deprecated in NX10.0.0. Use FeatureControlFrameDataBuilder.zoneShape() and FeatureControlFrameDataBuilder.setZoneShape(nxopen.annotations.FeatureControlFrameDataBuilder.ToleranceZoneShape) instead.

setTolerancingStandard(UFGdt.Standard) - Method in interface nxopen.uf.UFGdt

Refer to UF_GDT_set_tolerancing_standard for documentation.

setTolerantMachining(boolean) - Method in interface nxopen.cam.MillCutParameters

License requirements: cam_base ("CAM BASE")
.

setTolerantPositioning(boolean) - Method in interface nxopen.preferences.SessionAssemblies

Sets the option to allow tolerant (imprecise) geometry selection for assembly positioning
License requirements: None.

setTolHighlightNominal(boolean) - Method in interface nxopen.cam.InspectionMeasDataBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTolOpType(InspectionToleranceOperationBuilder.TolType) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTolSetting(double) - Method in interface nxopen.tooling.TraverseLoopBuilder

License requirements: None.

setToMarkVisibility(int, String, UFUndo.UserVisibility) - Method in interface nxopen.uf.UFUndo

Refer to UF_UNDO_set_to_mark_visibility for documentation.

setTool(DisplayableObject) - Method in interface nxopen.features.BooleanBuilder

Deprecated.

Deprecated in NX5.0.2. Use Features.BooleanBuilder#setToolBodyCollector instead.

setTool(NXObject) - Method in interface nxopen.features.RPODimension

License requirements: None.

setTool(NXObject) - Method in interface nxopen.features.TrimBodyBuilder

Sets the tool of the trim body feature
License requirements: solid_modeling ("SOLIDS MODELING")
.

setTool(boolean, String) - Method in interface nxopen.preferences.PartSheetmetal

The tool standard
License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setToolAssociativity(AssociativityType) - Method in interface nxopen.features.RPODimension

License requirements: None.

setToolAxis(NXObject) - Method in interface nxopen.cam.HoleBossSet

License requirements: cam_base ("CAM BASE")
.

setToolAxis(NXObject) - Method in interface nxopen.cam.NcmAvoidancePointBuilder

License requirements: cam_base ("CAM BASE")
.

setToolAxis(Vector3d) - Method in interface nxopen.cam.PathLinearMotion

License requirements: cam_base ("CAM BASE")
.

setToolAxis(PmopToolAxisCiBuilder.ToolAxisTypes) - Method in interface nxopen.cam.PmopToolAxisCiBuilder

License requirements: cam_base ("CAM BASE")
.

setToolAxis(int) - Method in interface nxopen.cam.ToolAxisCiBuilder

License requirements: cam_base ("CAM BASE")
.

setToolAxis(Direction) - Method in interface nxopen.die.UncutRegionsBuilder

License requirements: None.

setToolAxis(Axis) - Method in interface nxopen.geometricutilities.ExtrudeRevolveToolBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setToolAxis(UFVariant, double[]) - Method in interface nxopen.uf.UFDrpos

Refer to UF_DRPOS_set_tool_axis for documentation.

setToolAxisAsArcAxis(int) - Method in interface nxopen.cam.DrillGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setToolAxisChange(double) - Method in interface nxopen.cam.ToolPathTiltBuilder

Deprecated.

Deprecated in NX9.0.0. Use ToolPathTiltMachine.maxToolAxisChange() instead.

setToolAxisMode(OrientGeomBuilder.ToolAxisModes) - Method in interface nxopen.cam.OrientGeomBuilder

Sets the tool axis mode
License requirements: cam_base ("CAM BASE")
.

setToolAxisSmoothing(int) - Method in interface nxopen.cam.MillCutParameters

License requirements: cam_base ("CAM BASE")
.

setToolAxisStatus(int) - Method in interface nxopen.cam.NcmAvoidancePointBuilder

License requirements: cam_base ("CAM BASE")
.

setToolAxisType(int) - Method in interface nxopen.cam.DrillGeomBuilder

Sets the Tool Axis type
License requirements: cam_base ("CAM BASE")
.

setToolAxisType(HoleMakingBuilder.ToolAxisTypes) - Method in interface nxopen.cam.HoleMakingBuilder

License requirements: cam_base ("CAM BASE")
.

setToolAxisType(ProbeInspectSurfacePointMoveBuilder.ToolAxis) - Method in interface nxopen.cam.ProbeInspectSurfacePointMoveBuilder

License requirements: None.

setToolAxisType(ToolAxisAdvanced.Type) - Method in interface nxopen.cam.ToolAxisAdvanced

License requirements: cam_base ("CAM BASE")
.

setToolAxisType(ToolAxisFixed.Types) - Method in interface nxopen.cam.ToolAxisFixed

License requirements: cam_base ("CAM BASE")
.

setToolAxisType(ToolAxisVariable.Types) - Method in interface nxopen.cam.ToolAxisVariable

License requirements: cam_base ("CAM BASE")
.

setToolAxisUsage(NcmAvoidancePointBuilder.ToolAxisUsages) - Method in interface nxopen.cam.NcmAvoidancePointBuilder

License requirements: cam_base ("CAM BASE")
.

setToolAxisVector(NXObject) - Method in interface nxopen.cam.DrillGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setToolAxisVector(NXObject) - Method in interface nxopen.cam.HoleMakingBuilder

License requirements: cam_base ("CAM BASE")
.

setToolAxisVector(NXObject) - Method in interface nxopen.cam.OrientGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setToolbarVis(UFVariant, int) - Method in interface nxopen.uf.UFUi

Refer to UF_UI_set_toolbar_vis for documentation.

setToolBody(ScCollector) - Method in interface nxopen.features.EmbossBodyBuilder

License requirements: None.

setToolBody(Body) - Method in interface nxopen.features.MasterCutBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setToolBody(ScCollector) - Method in interface nxopen.features.SweptVolumeBuilder

License requirements: None.

setToolBodyCollector(ScCollector) - Method in interface nxopen.features.BooleanBuilder

License requirements: None.

setToolCarrierDirectionSelection(String, String, int) - Method in interface nxopen.sim.MachineToolConfiguration

Sets the direction selection for a tool carrier.

setToolCarrierName(String) - Method in interface nxopen.sim.MachineToolConfiguration

License requirements: None.

setToolCarrierRetraction(String, String, int) - Method in interface nxopen.sim.MachineToolConfiguration

Sets the retraction for a tool carrier.

setToolCarrierSwivelMode(String, String, int) - Method in interface nxopen.sim.MachineToolConfiguration

Sets the swiveling mode for a tool carrier.

setToolCarrierXRetractionPosition(String, String, double) - Method in interface nxopen.sim.MachineToolConfiguration

Sets the X retraction position for a tool carrier.

setToolCarrierYRetractionPosition(String, String, double) - Method in interface nxopen.sim.MachineToolConfiguration

Sets the Y retraction position for a tool carrier.

setToolCarrierZRetractionPosition(String, String, double) - Method in interface nxopen.sim.MachineToolConfiguration

Sets the Z retraction position for a tool carrier.

setToolChangesAtSafePlane(boolean) - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setToolCutter(NXObject[]) - Method in interface nxopen.cam.ManageToolPartBuilder

Sets the geometry objects for the tool's cutter
License requirements: None.

setToolDiameter(double) - Method in interface nxopen.cam.StockPerPassBuilder

License requirements: cam_base ("CAM BASE")
.

setToolDirection(Direction) - Method in interface nxopen.geometricutilities.ExtrudeRevolveToolBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setToolDisplayFrequency(int) - Method in interface nxopen.cam.DisplayTool

License requirements: cam_base ("CAM BASE")
.

setToolDisplayFrequency(int) - Method in interface nxopen.cam.OperationDisplayOptionsBuilder

License requirements: cam_base ("CAM BASE")
.

setToolDisplayType(DisplayTool.ToolDisplayTypes) - Method in interface nxopen.cam.DisplayTool

License requirements: cam_base ("CAM BASE")
.

setToolDisplayType(OperationDisplayOptionsBuilder.ToolDisplayTypes) - Method in interface nxopen.cam.OperationDisplayOptionsBuilder

License requirements: cam_base ("CAM BASE")
.

setToolDrivePoint(String) - Method in interface nxopen.cam.HoleDrillingBuilder

Set the name of the tool drive point
License requirements: cam_base ("CAM BASE")
.

setToolEmbossDirection(boolean) - Method in interface nxopen.features.EmbossBodyBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setToolGroup(InspectionGroup) - Method in interface nxopen.cam.InspectionCreatePathsBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setToolListProgramGroup(String) - Method in interface nxopen.cam.WorkInstructionBuilder

License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.

setToolMagazine(NXObject) - Method in interface nxopen.cam.ConvertFromMCDBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setToolMinimumLengthUsage(boolean) - Method in interface nxopen.cam.PlanarOperationBuilder

License requirements: cam_base ("CAM BASE")
.

setToolMountingJunction(NXObject) - Method in interface nxopen.cam.ManageToolPartBuilder

License requirements: None.

setToolName(String) - Method in interface nxopen.cam.InspectionCmmCommandBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setToolName(String) - Method in interface nxopen.cam.InspectionSensorBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setToolNewPlane(Plane) - Method in interface nxopen.features.shipdesign.SplitProfilePlateBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setToolOffset(int) - Method in interface nxopen.cam.ProbeCalibrateLengthMoveBuilder

License requirements: cam_base ("CAM BASE")
.

setToolOffset(int) - Method in interface nxopen.cam.ProbeCalibrateSphereMoveBuilder

License requirements: cam_base ("CAM BASE")
.

setToolOffset(int) - Method in interface nxopen.cam.ProbeControlParametersBuilder

License requirements: None.

setToolOption(SplitProfilePlateBuilder.ToolOptionType) - Method in interface nxopen.features.shipdesign.ShipTrimBodyBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setToolOption(SplitProfilePlateBuilder.ToolOptionType) - Method in interface nxopen.features.shipdesign.SplitProfilePlateBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setToolOption(UnsewBuilder.UnsewTool) - Method in interface nxopen.features.UnsewBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setToolOption(BooleanToolBuilder.BooleanToolType) - Method in interface nxopen.geometricutilities.BooleanToolBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setToolOption(SelectDividingObjectBuilder.ToolType) - Method in interface nxopen.geometricutilities.SelectDividingObjectBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setToolOption(SplitSolidBuilder.ToolObjectOption) - Method in interface nxopen.tooling.SplitSolidBuilder

License requirements: None.

setToolPartOrTargetPart(ClearanceManagementBuilder.Selection) - Method in interface nxopen.tooling.ClearanceManagementBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setToolpathCuttingLength(double) - Method in interface nxopen.cam.Operation

Sets toolpath cutting length in Part units (mm or inch)
License requirements: cam_base ("CAM BASE")
.

setToolpathCuttingTime(double) - Method in interface nxopen.cam.Operation

Sets toolpath cutting time in seconds
License requirements: cam_base ("CAM BASE")
.

setToolpathLength(double) - Method in interface nxopen.cam.Operation

Sets toolpath length in Part units (mm or inch)
License requirements: cam_base ("CAM BASE")
.

setToolpathSmoothing(int) - Method in interface nxopen.cam.MillCutParameters

License requirements: cam_base ("CAM BASE")
.

setToolpathTime(double) - Method in interface nxopen.cam.Operation

Sets toolpath time in seconds
License requirements: cam_base ("CAM BASE")
.

setToolPlane(Plane) - Method in interface nxopen.geometricutilities.FacePlaneToolBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setToolPoint(Point3d) - Method in interface nxopen.features.RPODimension

License requirements: None.

setToolPosition(BoundarySet.ToolPositionTypes) - Method in interface nxopen.cam.BoundarySet

License requirements: cam_base ("CAM BASE")
.

setToolPosition(DPMItpBuilder.ToolPositionOption) - Method in interface nxopen.cam.DmToolPosition

License requirements: cam_base ("CAM BASE")
.

setToolPosition(DPMItpBuilder.ToolPositionOption) - Method in interface nxopen.cam.DPMItpBuilder

Deprecated.

Deprecated in NX10.0.1. Use DmToolPosition.toolPosition() and DmToolPosition.setToolPosition(nxopen.cam.DPMItpBuilder.ToolPositionOption) instead.

setToolPositioningMethod(ToolPositioningBuilder.ToolPositioning) - Method in interface nxopen.cam.ToolPositioningBuilder

License requirements: cam_base ("CAM BASE")
.

setToolRadiusCompensation(boolean) - Method in interface nxopen.sim.MachineToolConfiguration

Sets the 3D Tool Radius Compensation information
License requirements: None.

setToolRegions(int[]) - Method in interface nxopen.cam.MergeSubopCommand

Set the tool regions
License requirements: None.

setToolReversed(boolean) - Method in interface nxopen.features.TrimExtendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setToolRunOffType(CutParametersToolRunOffTypes) - Method in interface nxopen.cam.MillCutParameters

License requirements: cam_base ("CAM BASE")
.

setToolShape(GougeCheckBuilder.ToolShapeType) - Method in interface nxopen.cam.GougeCheckBuilder

License requirements: cam_base ("CAM BASE")
.

setToolSide(BoundarySet.ToolSideTypes) - Method in interface nxopen.cam.BoundarySet

License requirements: cam_base ("CAM BASE")
.

setToolSide(LaserProfileMove.ToolSides) - Method in interface nxopen.cam.LaserProfileMove

License requirements: cam_base ("CAM BASE")
.

setToolString(String) - Method in interface nxopen.cam.InspectionCreatePathsBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setToolString(String) - Method in interface nxopen.cam.InspectionLinkPmiBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setToolTiltMethodType(ToolPathTiltTilting.ToolAxisTypes) - Method in interface nxopen.cam.ToolPathTiltTilting

License requirements: None.

setToolTip(String) - Method in interface nxopen.blockstyler.BodyCollector

License requirements: None.

setTooltip(String) - Method in interface nxopen.blockstyler.Button

License requirements: None.

setToolTip(String) - Method in interface nxopen.blockstyler.CurveCollector

License requirements: None.

setToolTip(String) - Method in interface nxopen.blockstyler.FaceCollector

License requirements: None.

setTooltip(String) - Method in interface nxopen.blockstyler.Label

License requirements: None.

setToolTip(String) - Method in interface nxopen.blockstyler.SectionBuilder

License requirements: None.

setToolTip(String) - Method in interface nxopen.blockstyler.SelectFeature

License requirements: None.

setToolTip(String) - Method in interface nxopen.blockstyler.SelectObject

License requirements: None.

setTooltip(String) - Method in interface nxopen.blockstyler.StringBlock

License requirements: None.

setToolTip(String) - Method in interface nxopen.blockstyler.SuperPoint

License requirements: None.

setToolTip(String) - Method in interface nxopen.blockstyler.SuperSection

License requirements: None.

setTooltipOnRolloverToggle(boolean) - Method in interface nxopen.display.SelPref

License requirements: None.

setToolTipTextHandler(Tree.ToolTipTextCallback) - Method in interface nxopen.blockstyler.Tree

Sets the tool tip callback.

setToolTraceSize(int) - Method in interface nxopen.cam.SimulationOptionsBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setToolType(AnalyzePocketBuilder.ToolTypes) - Method in interface nxopen.features.AnalyzePocketBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setToolType(BlendPocketBuilder.ToolTypes) - Method in interface nxopen.features.BlendPocketBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setToolType(int) - Method in interface nxopen.features.shipdesign.SplitStandardPartBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setToolVector(Direction) - Method in interface nxopen.features.shipdesign.ShipTrimBodyBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setToolVector(Direction) - Method in interface nxopen.features.shipdesign.SplitProfilePlateBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setTop(IOrientation) - Method in interface nxopen.die.RibChildBuilder

Sets the top limit geometry of the die rib.

setTop(double) - Method in interface nxopen.tooling.BlankLayoutBuilder

License requirements: None.

setTopCenter(Point) - Method in interface nxopen.cae.BoundingVolumeBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setTopColor(double[]) - Method in interface nxopen.display.Background

Sets the top color
License requirements: None.

setTopCorner(Point3d) - Method in interface nxopen.assemblies.BoxSearchTermBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setTopDialogItem(String) - Method in interface nxopen.uistyler.Attachment

Sets the top dialog item
License requirements: None.

setTopEnd(IOrientation) - Method in interface nxopen.die.RibChildBuilder

Sets the top end limit geometry of the die rib.

setTopEndByProfile(DirectionOption, IProfile[]) - Method in interface nxopen.die.RibChildBuilder

Sets the top end limit geometry of the die rib using a profile.

setTopExtension(WeldGrooveExtension) - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. This functionality is no longer supported.

setTopGeometry(NXObject) - Method in interface nxopen.cam.CutLevel

Set the top selected geometry
License requirements: cam_base ("CAM BASE")
.

setTopHorizontalOffset(double) - Method in interface nxopen.die.RibChildBuilder

Sets the top horizontal offset of the die rib.

setTopHorizontalOffset(double) - Method in interface nxopen.die.RibParentBuilder

Sets the top horizontal offset of die ribs.

setTopLevel(boolean) - Method in interface nxopen.ObjectGeneralPropertiesBuilder

License requirements: None.

setTopLimitOffset(double) - Method in interface nxopen.die.RibChildBuilder

Sets the top limit offset of the die rib.

setTopLimitOffset(double) - Method in interface nxopen.die.RibParentBuilder

Sets the top limit offset of die ribs.

setTopMargin(double) - Method in interface nxopen.drawings.BordersAndZonesBuilder

Deprecated.

Deprecated in NX10.0.0. Use SheetMarginSettingsBuilder.topTrimmedMargin() instead.

setTopOffCriticalDepths(boolean) - Method in interface nxopen.cam.CutLevel

License requirements: cam_base ("CAM BASE")
.

setTopOffCriticalDepths(boolean) - Method in interface nxopen.cam.CutLevelPlanar

License requirements: cam_base ("CAM BASE")
.

setTopOffLevelColor(NXColor) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setTopOffset(int) - Method in interface nxopen.uistyler.Attachment

Sets the top offset
License requirements: None.

setToPoint(Point) - Method in interface nxopen.cam.InspectionOperationTransformBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setToPoint(Point) - Method in interface nxopen.cam.OperationTransformBuilder

License requirements: cam_base ("CAM BASE")
.

setToPoint(Point) - Method in interface nxopen.cam.ToolPathEditorBuilder

License requirements: None.

setToPoint(Point) - Method in interface nxopen.features.MoveFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setToPoint(Point) - Method in interface nxopen.formboard.OrientBranchBuilder

Deprecated.

Deprecated in NX8.5.0. This OrientBranchBuilder.BranchAngleMethod.TWO_POINTS is no longer supported.

setToPoint(Point) - Method in interface nxopen.geometricutilities.ModlMotion

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setToPoint(Point) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setTopSeamDisplay(boolean) - Method in interface nxopen.annotations.LineWeldData

Sets the flag indicating whether the top seam is displayed
License requirements: None.

setTopSeamObjects(DisplayableObject[]) - Method in interface nxopen.annotations.LineWeldData

Sets the top seam objects.

setTopSeamReverse(boolean) - Method in interface nxopen.annotations.LineWeldData

Sets the flag indicating whether the top seam direction is reveresed
License requirements: None.

setTopSeamView(DraftingView) - Method in interface nxopen.annotations.LineWeldData

Sets the view for which top seam is to be created.

setTopShapeControlMethods(StyledCornerBuilder.ShapeControlMethodsTypes) - Method in interface nxopen.features.StyledCornerBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setTopTrimmedMargin(double) - Method in interface nxopen.drawings.SheetMarginSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setTopUntrimmedMargin(double) - Method in interface nxopen.drawings.SheetMarginSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setTopVerticalOffset(double) - Method in interface nxopen.die.RibChildBuilder

Sets the top vertical offset of the die rib.

setTopVerticalOffset(double) - Method in interface nxopen.die.RibParentBuilder

Sets the top vertical offset of die ribs.

setTopView(boolean) - Method in interface nxopen.drawings.ViewCreationWizardBuilder

License requirements: drafting ("DRAFTING")
.

setTopZc(double) - Method in interface nxopen.cam.CutLevel

License requirements: cam_base ("CAM BASE")
.

setTorquePreload(double) - Method in interface nxopen.motion.JointFrictionAdams

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using Motion.JointFrictionAdams#torquePreloadExpression to query or edit it.

setTorquePreload(double) - Method in interface nxopen.motion.JointFrictionRecurDyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using Motion.JointFrictionRecurDyn#torquePreloadExpression to query or edit it.

setTorsional(double) - Method in interface nxopen.motion.BushingCylindricalCoefficientsComponent

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using Motion.BushingCylindricalCoefficientsComponent#torsionalExpression to query or edit it.

setTorsionalFunction(Function) - Method in interface nxopen.motion.BushingCylindricalCoefficientsComponent

License requirements: mechanisms ("MECHANISMS")
.

setTorsionalMoment(boolean) - Method in interface nxopen.motion.JointFrictionAdams

Sets the torsional moment
License requirements: mechanisms ("MECHANISMS")
.

setTorsionalMoment(boolean) - Method in interface nxopen.motion.JointFrictionRecurDyn

Sets the torsional moment
License requirements: mechanisms ("MECHANISMS")
.

setToState(OverrideBuilder.ToStates) - Method in interface nxopen.validate.OverrideBuilder

License requirements: ug_checkmate ("UG Check Mate")
.

setToStation(StripLayoutBuilder.ToStationType) - Method in interface nxopen.tooling.StripLayoutBuilder

License requirements: None.

setTotalAlongX(int) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder

License requirements: None.

setTotalAlongY(int) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder

License requirements: None.

setTotalCollectionCount(ClearanceAnalysisBuilder.NumberOfCollections) - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setTotalDynamicNormals(int) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder

Sets number of dynamic normals
License requirements: studio_analyze ("STUDIO ANALYZE")
.

setTotalForce(String) - Method in interface nxopen.tooling.ForceCalculationBuilder

License requirements: None.

setTotalForceCenter(String) - Method in interface nxopen.tooling.ForceCalculationBuilder

License requirements: None.

setTotalLength(String) - Method in interface nxopen.geometricutilities.CurveLengthData

Set total length
License requirements: solid_modeling ("SOLIDS MODELING")
.

setTotalMass(boolean) - Method in interface nxopen.cae.Mesh0dBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setTotalNumber(int) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder

License requirements: None.

setTotalSearchDirectories(int) - Method in interface nxopen.Catiav5Importer

License requirements: None.

setToTerminal(LogicalTerminal) - Method in interface nxopen.routing.electrical.Connection

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setTouchArea(boolean) - Method in interface nxopen.tooling.ElectrodeCheckingBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setTouchBody(boolean) - Method in interface nxopen.tooling.ElectrodeCheckingBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setToVector(Direction) - Method in interface nxopen.features.MoveFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setToVector(Direction) - Method in interface nxopen.formboard.OrientBranchBuilder

License requirements: routing_harness ("Routing Harness")
.

setToVector(Direction) - Method in interface nxopen.geometricutilities.ModlMotion

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setToVector(Direction) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setTrace(SimDebugBuilder.TraceType, boolean) - Method in interface nxopen.sim.SimDebugBuilder

Sets the trace
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setTraceExplosionToMaster(boolean) - Method in interface nxopen.uf.UFMotion

Refer to UF_MOTION_set_trace_explosion_to_master for documentation.

setTraceLineCreateGapsLock(boolean) - Method in interface nxopen.drawings.CustomViewSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setTraceLineCreateGapsValue(double) - Method in interface nxopen.drawings.CustomViewSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setTraceLineHiddenColor(NXColor) - Method in interface nxopen.drawings.CustomViewSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setTraceLineHiddenFont(CustomViewSettingsBuilder.Font) - Method in interface nxopen.drawings.CustomViewSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setTraceLineHiddenWidth(CustomViewSettingsBuilder.Width) - Method in interface nxopen.drawings.CustomViewSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setTraceLineVisibleColor(NXColor) - Method in interface nxopen.drawings.CustomViewSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setTraceLineVisibleFont(CustomViewSettingsBuilder.Font) - Method in interface nxopen.drawings.CustomViewSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setTraceLineVisibleWidth(CustomViewSettingsBuilder.Width) - Method in interface nxopen.drawings.CustomViewSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setTraceOption(boolean) - Method in interface nxopen.motion.PostProcess

Set articulation trace option animation/articulation/spreadsheet run
License requirements: mechanisms ("MECHANISMS")
.

setTrackingCsys(CoordinateSystem) - Method in interface nxopen.annotations.CoordinateNoteBuilder

License requirements: None.

setTrackingData(String) - Method in interface nxopen.cam.NcmHoleMachining

License requirements: cam_base ("CAM BASE")
.

setTrackingMode(boolean) - Method in interface nxopen.cae.optimization.TBSEigenvalueOptimizationParameters

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setTrackingName(String) - Method in interface nxopen.cam.TrackpointBuilder

License requirements: None.

setTrackingPoint(Point) - Method in interface nxopen.annotations.CoordinateNoteBuilder

License requirements: None.

setTrackingPoint(int) - Method in interface nxopen.cam.ToolTrackingPointBuilder

Set the Tracking point index
License requirements: None.

setTrackingPointData(Tag, int, UFCutter.TrackingPointData) - Method in interface nxopen.uf.UFCutter

Refer to UF_CUTTER_set_tracking_point_data for documentation.

setTrackingPointStatus(TurningOperationBuilder.TrackingPointType) - Method in interface nxopen.cam.TurningOperationBuilder

License requirements: cam_base ("CAM BASE")
.

setTrackingPointStatus(TurnToolProbingBuilder.TrackingPointTypes) - Method in interface nxopen.cam.TurnToolProbingBuilder

License requirements: cam_base ("CAM BASE")
.

setTrackingPointType(int) - Method in interface nxopen.cam.Cutcom

License requirements: cam_base ("CAM BASE")
.

setTrackingXOff(double) - Method in interface nxopen.cam.SolidTrackingBuilder

License requirements: None.

setTrackingYOff(double) - Method in interface nxopen.cam.SolidTrackingBuilder

License requirements: None.

setTrackingZOff(double) - Method in interface nxopen.cam.SolidTrackingBuilder

License requirements: None.

setTrackLowerLimitHeightTH1(String) - Method in interface nxopen.HumanPosturePredictionBuilder

License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setTrackLowerLimitLengthTL1(String) - Method in interface nxopen.HumanPosturePredictionBuilder

License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setTrackSide(TirePropertyTnoBuilder.TrackSideType) - Method in interface nxopen.motion.TirePropertyTnoBuilder

License requirements: mechanisms ("MECHANISMS")
.

setTrackUpperLimitHeightTH2(String) - Method in interface nxopen.HumanPosturePredictionBuilder

License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setTrackUpperLimitLengthTL23(String) - Method in interface nxopen.HumanPosturePredictionBuilder

License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setTrailingAngle(double) - Method in interface nxopen.cam.ToolAxisAdvanced

Deprecated.

Deprecated in NX8.5.0. Use CAM.LeadAngles#atTrailingEdge instead.

setTrailingEdgeClearanceAngle(double) - Method in interface nxopen.cam.ToolAxisAdvanced

License requirements: cam_base ("CAM BASE")
.

setTransfer2dComponentAnnotation(boolean) - Method in interface nxopen.layout2d.AssemblyCreationSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setTransferAnnotation(boolean) - Method in interface nxopen.drawings.BaseViewStyle

The status of transfer annotation controls whether or not annotations created in a model view are transferred to the drawing when a view is imported.

setTransferAnnotation(boolean) - Method in interface nxopen.drawings.ViewStyleBaseBuilder

License requirements: drafting ("DRAFTING")
.

setTransferAnnotation(boolean) - Method in interface nxopen.preferences.BaseViewPreferences

The status of transfer annotation controls whether or not annotations created in a model view are transferred to the drawing when a view is imported.

setTransferBetweenLevelsType(NcmPlanarBuilder.TransferBetweenLevelsTypes) - Method in interface nxopen.cam.NcmPlanarBuilder

License requirements: cam_base ("CAM BASE")
.

setTransferBetweenRegionsType(NcmPlanarBuilder.TransferBetweenRegionsTypes) - Method in interface nxopen.cam.NcmPlanarBuilder

Deprecated.

Deprecated in NX9.0.0. Please use NcmTransfer.type() instead.

setTransferHeight(double) - Method in interface nxopen.cam.ToolPathSplitBuilder

License requirements: None.

setTransferHeight(double) - Method in interface nxopen.cam.ToolPathSplitParametersBuilder

License requirements: None.

setTransferMaxToolAxisChange(double) - Method in interface nxopen.cam.NcmSmoothingBuilder

License requirements: cam_base ("CAM BASE")
.

setTransferMethod(PlungeMillingBuilder.TransferMethodTypes) - Method in interface nxopen.cam.PlungeMillingBuilder

License requirements: cam_base ("CAM BASE")
.

setTransferTolerance(double) - Method in interface nxopen.cam.NcmSmoothingBuilder

License requirements: cam_base ("CAM BASE")
.

setTransferToleranceSource(NcmSmoothingBuilder.SmoothToleranceSources) - Method in interface nxopen.cam.NcmSmoothingBuilder

License requirements: cam_base ("CAM BASE")
.

setTransferTopLevelSketchAnnotation(boolean) - Method in interface nxopen.layout2d.AssemblyCreationSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setTransferType(ToolPathSplitBuilder.TransferTypes) - Method in interface nxopen.cam.ToolPathSplitBuilder

License requirements: None.

setTransferType(ToolPathSplitParametersBuilder.TransferTypes) - Method in interface nxopen.cam.ToolPathSplitParametersBuilder

License requirements: None.

setTransferUsingMethod(ToolPathSplitBuilder.TransferUsingMethods) - Method in interface nxopen.cam.ToolPathSplitBuilder

License requirements: None.

setTransferUsingMethod(ToolPathSplitParametersBuilder.TransferUsingMethods) - Method in interface nxopen.cam.ToolPathSplitParametersBuilder

License requirements: None.

setTransferWithinLevelsType(NcmPlanarBuilder.TransferWithinLevelsTypes) - Method in interface nxopen.cam.NcmPlanarBuilder

License requirements: cam_base ("CAM BASE")
.

setTransferWithinLevelsWith(NcmPlanarBuilder.TransferWithinLevelsWiths) - Method in interface nxopen.cam.NcmPlanarBuilder

License requirements: cam_base ("CAM BASE")
.

setTransform(Matrix3x3, Vector3d) - Method in interface nxopen.layout2d.Component

Sets the absolute transform on a component, given a rotation matrix and a translation vector
License requirements: nx_layout ("NX Layout")
.

setTransformationMethod(SubdivisionExtrudeCageBuilder.TransformationMethodType) - Method in interface nxopen.features.subdivision.SubdivisionExtrudeCageBuilder

Sets the transformation method.

setTransformationMethod(TransformCageData.TransformationMethodType) - Method in interface nxopen.features.subdivision.TransformCageData

Sets the transformation method.

setTransformationObject(TransformerData.ObjectType) - Method in interface nxopen.geometricutilities.TransformerData

Sets a component of the tool using which transformation is started.

setTransformCircles(boolean) - Method in interface nxopen.cam.ToolPathEditorBuilder

License requirements: None.

setTransformComponents(FlatSolidBuilder.TransformComponentsOption) - Method in interface nxopen.features.sheetmetal.FlatSolidBuilder

License requirements: nx_flexible_pcb ("NX Flexible PCB")
.

setTransformCurvesContinuity(FtmTransformCurvesBuilder.TransformCurvesContinuityType) - Method in interface nxopen.geometricutilities.FtmTransformCurvesBuilder

License requirements: None.

setTransformEndPoint(Point) - Method in interface nxopen.geometricutilities.FtmTransformPointsBuilder

License requirements: None.

setTransformerToObject(CageManipulatorData.ObjectSelectionData) - Method in interface nxopen.features.subdivision.CageManipulatorData

Repositions the TransformerData to the specified entity.

setTransformerToObject(CageManipulatorData.ObjectSelectionData) - Method in interface nxopen.features.subdivision.CopyCageBuilder

Repositions the TransformerData to the specified entity.

setTransformFactor(double) - Method in interface nxopen.features.MeshTransformerBuilder

License requirements: None.

setTransformMatrix(Matrix3x3) - Method in interface nxopen.die.QuickBinderBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setTransformMethod(PedestrianProtectionBuilder.TransformMethods) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setTransformOrigin(Point3d) - Method in interface nxopen.die.QuickBinderBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setTransformRestrictionAreas(boolean) - Method in interface nxopen.features.sheetmetal.FlatSolidBuilder

License requirements: nx_flexible_pcb ("NX Flexible PCB")
.

setTransformStartPoint(Point) - Method in interface nxopen.geometricutilities.FtmTransformPointsBuilder

License requirements: None.

setTransformToAbsoluteCsys(boolean) - Method in interface nxopen.features.sheetmetal.FlatPatternBuilder

Sets the flag which decides if the flattened solid will be transformed to Absolute CSYS.

setTransformToAbsoluteCsys(boolean) - Method in interface nxopen.features.sheetmetal.FlatSolidBuilder

Sets the flag which decides if the flattened solid will be transformed to Absolute CSYS.

setTransformType(InspectionOperationTransformBuilder.Transform) - Method in interface nxopen.cam.InspectionOperationTransformBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTransformType(OperationTransformBuilder.Transform) - Method in interface nxopen.cam.OperationTransformBuilder

License requirements: cam_base ("CAM BASE")
.

setTransFrameEnum(ShipIntersectionsBuilder.Type) - Method in interface nxopen.features.shipdesign.ShipIntersectionsBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setTransientPartPersistencePolicy(Session.TransientPartPolicy) - Method in interface nxopen.Session

Sets the persistence policy for transient parts in the session
License requirements: None.

setTransition(int) - Method in interface nxopen.cae.LocalRemeshBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setTransition(StudioSurfaceBuilder.TransitionOptions) - Method in interface nxopen.features.StudioSurfaceBuilder

License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

setTransition(TransitionLawNodeBuilder.TransitionType) - Method in interface nxopen.geometricutilities.TransitionLawNodeBuilder

Sets the transition type
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setTransitionDefinition(DrawBeadBuilder.TransitionDefinitionTypes) - Method in interface nxopen.die.DrawBeadBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setTransitionGeometry(int, DisplayableObject) - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder

Sets the transition geometry given the index.

setTransitionLinkFlag(boolean) - Method in interface nxopen.geometricutilities.ConicCrossSection

License requirements: solid_modeling ("SOLIDS MODELING")
.

setTransitionMethod(TransitionBuilder.TransitionMethods) - Method in interface nxopen.features.shipdesign.TransitionBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setTransitionOption(StyledSweepBuilder.TransitionOptions) - Method in interface nxopen.features.StyledSweepBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setTransitionOptions(GlobalShapingBuilder.TransitionType) - Method in interface nxopen.features.GlobalShapingBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setTransitionsBetweenPaths(boolean) - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTransitionShapeControl(double) - Method in interface nxopen.features.GlobalShapingBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setTransitionSurfType(MWDesignPartingSurfaceBuilder.TransitionSurfaceType) - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder

License requirements: None.

setTransitionsWithinPaths(boolean) - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTransitionType(IFormBuilder.TransitionTypes) - Method in interface nxopen.features.IFormBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setTransitionType(TransitionBuilder.TransitionTypes) - Method in interface nxopen.features.shipdesign.TransitionBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setTransitionType(PathTransitionBuilder.Type) - Method in interface nxopen.mechanicalrouting.PathTransitionBuilder

License requirements: routing_base ("Routing Basic")
.

setTransitionType(SegmentBuilder.StraightTransitionTypeChoices) - Method in interface nxopen.motion.SegmentBuilder

License requirements: mechanisms ("MECHANISMS")
.

setTransitionVelocity(double) - Method in interface nxopen.motion.CurveContactAdams

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using CurveContactAdams.transitionVelocityExpression() to query or edit it.

setTransitionVelocity(double) - Method in interface nxopen.motion.CurveContactRecurdyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using CurveContactRecurdyn.transitionVelocityExpression() to query or edit it.

setTranslateCsys(CoordinateSystem) - Method in interface nxopen.weld.JointmarkBuilder

License requirements: ugweld ("UG WELD")
.

setTranslateCsys(CoordinateSystem) - Method in interface nxopen.weld.WeldPointBuilder

Sets the coordinate system that a point is to be translated about.

setTranslateMagnitude(double) - Method in interface nxopen.motion.LinkInitialVelocity

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using LinkInitialVelocity.translateExpression() to query or edit it.

setTranslateUnselectedLayer(boolean) - Method in interface nxopen.DxfdwgImporter

License requirements: None.

setTranslateVector(Direction) - Method in interface nxopen.motion.LinkInitialVelocity

License requirements: mechanisms ("MECHANISMS")
.

setTranslateXDistance(String) - Method in interface nxopen.weld.WeldPointBuilder

License requirements: ugweld ("UG WELD")
.

setTranslateYDistance(String) - Method in interface nxopen.weld.WeldPointBuilder

License requirements: ugweld ("UG WELD")
.

setTranslateZDistance(String) - Method in interface nxopen.weld.WeldPointBuilder

License requirements: ugweld ("UG WELD")
.

setTranslationAmount(int) - Method in interface nxopen.cae.optimization.TBSTopologyLinkCondition

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setTranslationArbitraryPlane(Plane) - Method in interface nxopen.features.StudioXformBuilder

Deprecated.

Deprecated in NX8.5.0. Use StudioXformBuilderEx instead.

setTranslationArbitraryVector(Direction) - Method in interface nxopen.features.StudioXformBuilder

Deprecated.

Deprecated in NX8.5.0. Use StudioXformBuilderEx instead.

setTranslationDirection(StudioXformBuilder.TranslationDirectionType) - Method in interface nxopen.features.StudioXformBuilder

Deprecated.

Deprecated in NX8.5.0. Use StudioXformBuilderEx instead.

setTranslationVector(Direction) - Method in interface nxopen.features.GeomcopyBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setTranslationX(double) - Method in interface nxopen.DxfdwgImporter

License requirements: None.

setTranslationY(double) - Method in interface nxopen.DxfdwgImporter

License requirements: None.

setTranslationZ(double) - Method in interface nxopen.DxfdwgImporter

License requirements: None.

setTranslucency(int) - Method in interface nxopen.assemblies.ProductOutlineBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setTranslucency(int) - Method in interface nxopen.cae.SimBCDisplay

Sets the BC display translucency factor this option specifies the translucency of the BC display symbol.

setTranslucency(int) - Method in interface nxopen.features.vehicledesign.AllAroundVisionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setTranslucency(int) - Method in interface nxopen.fields.DisplayPropertiesBuilder

License requirements: None.

setTranslucency(int) - Method in interface nxopen.mechatronics.DisplayChangerBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setTranslucency(boolean) - Method in interface nxopen.preferences.PartDrafting

Sets the flag indicating whether to display solids in shaded member views with translucency.

setTranslucency(int) - Method in interface nxopen.preferences.PartObject

Sets the translucency value
License requirements: None.

setTranslucency(boolean) - Method in interface nxopen.preferences.SessionVisualizationVisual

Sets the translucency flag.

setTranslucency(int) - Method in interface nxopen.tooling.ManufacturingGeometryBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setTranslucency(Tag, int) - Method in interface nxopen.uf.UFObj

Refer to UF_OBJ_set_translucency for documentation.

setTranslucencyAsBoundaryFacesToggle(boolean) - Method in interface nxopen.tooling.MWSearchRegionBuilder

License requirements: None.

setTranslucencyInsideNegative(int) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setTranslucencyInsidePositive(int) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setTranslucencyOption(MWDefineRegionsBuilder.TranslucencyOptionType) - Method in interface nxopen.tooling.MWDefineRegionsBuilder

License requirements: None.

setTranslucencyOutsideNegative(int) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setTranslucencyOutsidePositive(int) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setTranslucencyValue(int) - Method in interface nxopen.cam.SimulationOptionsBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setTranslucencyValueScale(int) - Method in interface nxopen.tooling.MWDefineRegionsBuilder

License requirements: None.

setTranslucentPlanes(boolean) - Method in interface nxopen.preferences.ViewSection

License requirements: None.

setTransmission(String) - Method in interface nxopen.features.vehicledesign.BaseDataDriverBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setTransmission(HumanPosturePredictionBuilder.TransmissionType) - Method in interface nxopen.HumanPosturePredictionBuilder

License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setTransparencyColor(double[]) - Method in interface nxopen.display.DecalBuilder

Sets the transparency color
License requirements: None.

setTransparencyColorOption(ImageBaseBuilder.TransparencyColorFrom) - Method in interface nxopen.display.ImageBaseBuilder

License requirements: None.

setTransparencyTolerance(int) - Method in interface nxopen.display.DecalBuilder

License requirements: None.

setTransparentPixelColor(double[]) - Method in interface nxopen.display.ImageBaseBuilder

Sets the transparency color (RGB value) of the image.

setTransveralInsertArea(boolean) - Method in interface nxopen.annotations.BaseFrameBarBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setTransversalInsertAreaLabelColor(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setTransversalInsertAreaLabelFont(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setTransversalInsertAreaLabelItalicized(boolean) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setTransversalInsertAreaLabelName(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setTransversalInsertAreaLabelWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setTransversalInsertAreaTicColor(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setTransversalInsertAreaTicDisplay(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setTransversalInsertAreaTicFont(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setTransversalInsertAreaTicLength(double) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setTransversalInsertAreaTicWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setTransverseFrames(boolean) - Method in interface nxopen.annotations.BaseFrameBarBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setTransverseFramesExtendBegin(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setTransverseFramesExtendColor(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setTransverseFramesExtendFont(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setTransverseFramesExtendFrequency(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setTransverseFramesExtendLength(double) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setTransverseFramesExtendWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setTransverseFramesLabelColor(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setTransverseFramesLabelFont(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setTransverseFramesLabelItalicized(boolean) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setTransverseFramesLabelName(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setTransverseFramesLabelWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setTransverseFramesSkipLabelBegin(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setTransverseFramesSkipLabelFrequency(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setTransverseFramesSkipTicBegin(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setTransverseFramesSkipTicFrequency(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setTransverseFramesTicColor(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setTransverseFramesTicDisplay(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setTransverseFramesTicFont(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setTransverseFramesTicLength(double) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setTransverseFramesTicWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setTraversal(NXColor) - Method in interface nxopen.cam.PathDisplayColors

License requirements: cam_base ("CAM BASE")
.

setTraversalSettings(Tag, UFPlist.TraversalSettings) - Method in interface nxopen.uf.UFPlist

Refer to UF_PLIST_set_traversal_settings for documentation.

setTraverseEdges(NXObject[]) - Method in interface nxopen.tooling.TrimRegionBuilder

Sets the edges from traverse loop to builder data.

setTraverseInteriorEdges(boolean) - Method in interface nxopen.cam.GeometrySet

License requirements: cam_base ("CAM BASE")
.

setTraverseInteriorEdges(boolean) - Method in interface nxopen.cam.SurfaceRegions

License requirements: cam_base ("CAM BASE")
.

setTraverseInteriorEdges(boolean) - Method in interface nxopen.features.ExtractFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setTraverseInteriorEdges(boolean) - Method in interface nxopen.tooling.FormingInsertBuilder

License requirements: None.

setTraverseOpenPasses(CutParametersTraverseOpenPassesTypes) - Method in interface nxopen.cam.MillCutParameters

License requirements: cam_base ("CAM BASE")
.

setTraversePostCommands(TaggedObject) - Method in interface nxopen.cam.NcmTransferBuilder

License requirements: cam_base ("CAM BASE")
.

setTraverseStartEndPoint(NXObject, Point3d, NXObject[]) - Method in interface nxopen.tooling.TraverseLoopBuilder

Set start and end points for traversal.

setTraverseType(NcmTransferBuilder.TraverseTypes) - Method in interface nxopen.cam.NcmTransferBuilder

License requirements: cam_base ("CAM BASE")
.

setTreatAsRigid(boolean) - Method in interface nxopen.motion.FlexBodyBuilder

License requirements: mechanisms ("MECHANISMS")
.

setTreatmentType(ClosedCornerBuilder.TreatmentTypeOptions) - Method in interface nxopen.features.sheetmetal.ClosedCornerBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setTreatmentType(CornerTreatmentBuilder.CornerTreatmentType) - Method in interface nxopen.features.sheetmetal.CornerTreatmentBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setTreatmentType(ThreeBendCornerBuilder.TreatmentTypeOptions) - Method in interface nxopen.features.sheetmetal.ThreeBendCornerBuilder

Sets the corner treatment type.

setTreatOneDegreeBsplineAsPolyline(boolean) - Method in interface nxopen.preferences.SessionModeling

License requirements: None.

setTreatWarningAsFail(boolean) - Method in interface nxopen.validate.ValidatorOptions

License requirements: None.

setTreeWidth(int) - Method in interface nxopen.blockstyler.Explorer

License requirements: None.

setTriadLocation(SessionVisualizationScreen.ViewTriadLocation) - Method in interface nxopen.preferences.SessionVisualizationScreen

License requirements: None.

setTriadVisibility(int) - Method in interface nxopen.preferences.SessionVisualizationScreen

Sets
License requirements: None.

setTriadVisibility(boolean) - Method in interface nxopen.View

Sets the visibility of the view triad in the view.

setTriangleBase(double) - Method in interface nxopen.weld.WeldBeadSizeBuilder

License requirements: ugweld ("UG WELD")
.

setTriangleHeight(double) - Method in interface nxopen.weld.WeldBeadSizeBuilder

License requirements: ugweld ("UG WELD")
.

setTriangleMethod(WeldBeadSizeBuilder.TriangleMethodType) - Method in interface nxopen.weld.WeldBeadSizeBuilder

License requirements: ugweld ("UG WELD")
.

setTriangleTolerance(double) - Method in interface nxopen.cam.PreprocessGeometryBuilder

License requirements: cam_base ("CAM BASE")
.

setTriangleType(WeldBeadSizeBuilder.TriangleTypes) - Method in interface nxopen.weld.WeldBeadSizeBuilder

License requirements: ugweld ("UG WELD")
.

setTrim(boolean) - Method in interface nxopen.cam.NcmPlanarEngRetBuilder

Deprecated.

Deprecated in NX10.0.3. Use NcmPlanarEngRetBuilder.minimumClearance() instead.

setTrim(boolean) - Method in interface nxopen.features.FlowBlendBuilder

Deprecated.

Deprecated in NX10.0.1. This functionality is no longer supported.

setTrim(boolean) - Method in interface nxopen.features.shipdesign.ManufacturingPreparationBuilder

License requirements: None.

setTrimAndExtendFromRegion(MWDesignPartingSurfaceBuilder.TrimAndExtendFromRegionType) - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder

License requirements: None.

setTrimAndSewMethod(StyledCornerBuilder.TrimAndSewMethodTypes) - Method in interface nxopen.features.StyledCornerBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setTrimBaseFaces(boolean) - Method in interface nxopen.features.SilhouetteFlangeBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setTrimBoundingObjects(boolean) - Method in interface nxopen.features.TrimCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setTrimBounds(DirectionOption, IProfile[]) - Method in interface nxopen.die.TrimTaskBuilder

Sets the trim bounds of the trim task.

setTrimClearanceMethod(ToolPathEditorBuilder.ClearanceMethodType) - Method in interface nxopen.cam.ToolPathEditorBuilder

License requirements: None.

setTrimClearancePlane(NXObject) - Method in interface nxopen.cam.ToolPathEditorBuilder

License requirements: None.

setTrimColor(NXColor) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setTrimConnectionMethod(ToolPathEditorBuilder.ConnectionMethodType) - Method in interface nxopen.cam.ToolPathEditorBuilder

License requirements: None.

setTrimControl(CutParametersTrimControlTypes) - Method in interface nxopen.cam.MillCutParameters

License requirements: cam_base ("CAM BASE")
.

setTrimCurve1Type(StyledCornerBuilder.TrimCurveTypes) - Method in interface nxopen.features.StyledCornerBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setTrimCurve2Type(StyledCornerBuilder.TrimCurveTypes) - Method in interface nxopen.features.StyledCornerBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setTrimCurveCreateType(OutputCurvesBuilder.TrimCurveCreateTypes) - Method in interface nxopen.die.OutputCurvesBuilder

Sets the trim curve creation type
License requirements: die_engineering ("DIE ENGINEERING")
.

setTrimCurveType(OutputCurvesBuilder.TrimCurveTypes) - Method in interface nxopen.die.OutputCurvesBuilder

Sets the trim curve type.

setTrimDataDetails(NXObject, NXObject, String, String) - Method in interface nxopen.tooling.DesignTrimToolBuilder

Set details of the trim data.

setTrimDataDetails(int, NXObject[], NXObject[]) - Method in interface nxopen.tooling.EjectorPostProcessingBuilder

Set details of the trim data.

setTrimDataDetails(int, int, NXObject[], NXObject[]) - Method in interface nxopen.tooling.TrimMoldComponentsBuilder

Set details of the trim data.

setTrimDimensionLineStyle(TrimDimensionLineStyle) - Method in interface nxopen.annotations.DimensionPreferences

Sets the trim dimension line style
License requirements: None.

setTrimDimLine(TrimDimensionLineStyle) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setTrimDirection(Axis) - Method in interface nxopen.cam.ToolPathEditorBuilder

License requirements: None.

setTrimDirection(Direction) - Method in interface nxopen.die.DieAssistantTrimProfile

License requirements: None.

setTrimDirection(Vector3d) - Method in interface nxopen.features.shipdesign.SplitProfilePlateBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setTrimDirection(TrimBodyBuilder.DirectionType) - Method in interface nxopen.features.TrimBodyBuilder

Sets the trim direction of the trim body feature
License requirements: None.

setTrimDirection(boolean) - Method in interface nxopen.tooling.DieEngTrimTaskBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setTrimDirection(boolean) - Method in interface nxopen.tooling.TrimMoldComponentsBuilder

License requirements: None.

setTrimDirection(boolean) - Method in interface nxopen.tooling.TrimSolidBuilder

License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setTrimEdgeOffset(double) - Method in interface nxopen.weld.EasyPatternBuilder

License requirements: ugweld ("UG WELD")
.

setTrimetricView(boolean) - Method in interface nxopen.drawings.ViewCreationWizardBuilder

License requirements: drafting ("DRAFTING")
.

setTrimGeometry(ToolPathEditorBuilder.TrimGeometryType) - Method in interface nxopen.cam.ToolPathEditorBuilder

License requirements: None.

setTrimInputCurves(boolean) - Method in interface nxopen.SketchChamferBuilder

License requirements: drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setTrimInputFaces(boolean) - Method in interface nxopen.features.AestheticFaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setTrimInputFacesToBlendFaces(boolean) - Method in interface nxopen.features.FaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setTrimLine(NXObject) - Method in interface nxopen.cam.ToolPathEditorBuilder

License requirements: None.

setTrimLongInputFacesToExtendedRail(boolean) - Method in interface nxopen.features.FaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setTrimMethod(AOCSBuilder.Trim) - Method in interface nxopen.features.AOCSBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.

setTrimMethod(OffsetCurveBuilder.TrimOption) - Method in interface nxopen.features.OffsetCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setTrimMethod(StyledBlendBuilder.StyledBlendTrimMethodType) - Method in interface nxopen.features.StyledBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setTrimmingColor(NXColor) - Method in interface nxopen.tooling.ScrapDesignBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setTrimmingDirection(Direction) - Method in interface nxopen.tooling.DieEngTrimAngleCheckBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setTrimmingMarkColor(NXColor) - Method in interface nxopen.drawings.SheetBorderSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setTrimmingMarkLength(double) - Method in interface nxopen.drawings.BordersAndZonesBuilder

Deprecated.

Deprecated in NX10.0.0. Use SheetBorderSettingsBuilder.trimmingMarkLength() instead.

setTrimmingMarkLength(double) - Method in interface nxopen.drawings.SheetBorderSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setTrimmingMarkStyle(TrimmingMarkStyleType) - Method in interface nxopen.drawings.SheetBorderSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setTrimmingMarkThickness(double) - Method in interface nxopen.drawings.BordersAndZonesBuilder

Deprecated.

Deprecated in NX10.0.0. Use SheetBorderSettingsBuilder.trimmingMarkWidth() instead.

setTrimmingMarkWidth(double) - Method in interface nxopen.drawings.SheetBorderSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setTrimmingOption(boolean) - Method in interface nxopen.features.EdgeBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setTrimmingOption(FaceBlendBuilder.TrimmingMethod) - Method in interface nxopen.features.FaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setTrimmingOption(MidSurfaceByFacePairsBuilder.TrimmingOptionType) - Method in interface nxopen.features.MidSurfaceByFacePairsBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setTrimmingSteepAngle(double) - Method in interface nxopen.cam.ToolPathSplitParametersBuilder

License requirements: cam_base ("CAM BASE")
.

setTrimNewDieFace(boolean) - Method in interface nxopen.die.PierceTaskBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setTrimNewDieFace(boolean) - Method in interface nxopen.die.TrimTaskBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setTrimNewDieFace(boolean) - Method in interface nxopen.tooling.DieEngTrimTaskBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setTrimNum(ScrapDesignBuilder.TrimNumType) - Method in interface nxopen.tooling.ScrapDesignBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setTrimObject(FacePlaneSelectionBuilder.TrimObjectType) - Method in interface nxopen.geometricutilities.FacePlaneSelectionBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setTrimOption(boolean) - Method in interface nxopen.features.EmbossBodyBuilder

License requirements: None.

setTrimOrExtendToBend(boolean) - Method in interface nxopen.features.sheetmetal.BridgeTransitionBuilder

License requirements: nx_flexible_pcb ("NX Flexible PCB") OR nx_sheet_metal ("NX Sheet Metal")
.

setTrimOutputCurveType(OutputCurvesBuilder.TrimOutputCurveTypes) - Method in interface nxopen.die.OutputCurvesBuilder

Sets the trim curve output type
License requirements: die_engineering ("DIE ENGINEERING")
.

setTrimPart(EjectorPostProcessingBuilder.TrimPartName) - Method in interface nxopen.tooling.EjectorPostProcessingBuilder

License requirements: None.

setTrimPart(TrimMoldComponentsBuilder.TrimPartName) - Method in interface nxopen.tooling.TrimMoldComponentsBuilder

License requirements: None.

setTrimPlane(NXObject) - Method in interface nxopen.cam.ToolPathEditorBuilder

License requirements: None.

setTrimProfileDirection(DirectionOption) - Method in interface nxopen.die.DieAssistantTrimProfile

License requirements: None.

setTrimSheetType(MachineReliefBuilder.TrimSheetTypes) - Method in interface nxopen.die.MachineReliefBuilder

License requirements: ug_die_design ("Die Design")
.

setTrimSide(ToolPathEditorBuilder.TrimSideType) - Method in interface nxopen.cam.ToolPathEditorBuilder

License requirements: None.

setTrimSide(boolean) - Method in interface nxopen.die.DieAssistantTrimProfile

License requirements: None.

setTrimSideTags(Direction[]) - Method in interface nxopen.tooling.DieEngTrimAngleCheckBuilder

Set the vector tags of joined trimming curve trim sides.

setTrimSurface(EjectorPostProcessingBuilder.TrimSufaceName) - Method in interface nxopen.tooling.EjectorPostProcessingBuilder

License requirements: None.

setTrimSurface(TrimMoldComponentsBuilder.TrimSurfaceName) - Method in interface nxopen.tooling.TrimMoldComponentsBuilder

License requirements: None.

setTrimToBoundary(boolean) - Method in interface nxopen.features.NSidedSurfaceBuilder

License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

setTrimToFaceEdgesOption(boolean) - Method in interface nxopen.features.AOCSBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.

setTrimTolerance(double) - Method in interface nxopen.tooling.DieEngTrimTaskBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setTrimToParentDuct(boolean) - Method in interface nxopen.routing.WindCatcherBuilder

License requirements: routing_hvac ("Routing HVAC")
.

setTrimType(PlateBoundaryOptionBuilder.TrimTypes) - Method in interface nxopen.features.shipdesign.PlateBoundaryOptionBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setTrimType(Extend.ExtendType) - Method in interface nxopen.geometricutilities.Extend

License requirements: solid_modeling ("SOLIDS MODELING")
.

setTrimType(SketchAssociativeTrimBuilder.TrimOption) - Method in interface nxopen.SketchAssociativeTrimBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setTrimWallAngleScale(double) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setTrimWallAttributes(String, String, int) - Method in interface nxopen.die.SteelInsertSectionBuilder

Sets the steelinsert trim wall faces attributes
License requirements: ug_die_design ("Die Design")
.

setTrimWithGuideLines(boolean) - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder

License requirements: None.

setTrueHiddenLine(boolean) - Method in interface nxopen.drawings.ViewStyleThreadsBuilder

License requirements: drafting ("DRAFTING")
.

setTrueLengthText(String) - Method in interface nxopen.annotations.DimensionPreferences

Sets the flag indicating true-length text for the dimension
License requirements: None.

setTrueLengthText(String) - Method in interface nxopen.annotations.DimensionStyleBuilder

Sets the true length dimension text
License requirements: nx_ship_drafting ("Ship Drafting") OR drafting ("DRAFTING")
.

setTrueLengthTextPosition(TrueLengthTextPosition) - Method in interface nxopen.annotations.DimensionPreferences

Sets the True Length Text Position
License requirements: None.

setTrueLengthTextPosition(TrueLengthTextPosition) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: nx_ship_drafting ("Ship Drafting") OR drafting ("DRAFTING")
.

setTrueShapeData(boolean) - Method in interface nxopen.SaveOptions

Sets the option indicating whether to generate data for true shape filtering (.ts files)
License requirements: None.

setTrueShapeFiltering(boolean) - Method in interface nxopen.preferences.SessionAssemblies

Sets the true shape filtering option
License requirements: None.

setTrueShapeRefinement(boolean) - Method in interface nxopen.assemblies.BoxSearchTermBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setTrueShapeRefinement(boolean) - Method in interface nxopen.assemblies.PlaneSearchTermBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setTrueShapeRefinement(boolean) - Method in interface nxopen.assemblies.ProximitySearchTermBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setTrueShapeRefinement(boolean) - Method in interface nxopen.assemblies.RunContentProximitySearchTermBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setTrueSurfaceDisplay(ViewVisualizationVisual.TrueSurfaceDisplayPref) - Method in interface nxopen.preferences.ViewVisualizationVisual

Deprecated.

Deprecated in NX4.0.0. Use ViewVisualizationVisual.setDisplayAppearance(nxopen.preferences.ViewVisualizationVisual.DisplayAppearanceOptions) instead.

setTubeDiameter(double) - Method in interface nxopen.weld.WeldBeadSizeBuilder

License requirements: ugweld ("UG WELD")
.

setTurnDirection(InspectionMethodBuilder.ScanHelixTurnDirectionTypes) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTurnDirection(InspectionMethodBuilder.ScanHelixTurnDirectionTypes) - Method in interface nxopen.cam.InspectionScanHelixBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTurnDirection(HelixBuilder.TurnDirections) - Method in interface nxopen.features.HelixBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setTurnDisplCollTog(int) - Method in interface nxopen.cam.TurnMethodBuilder

Set the display collisions value
License requirements: None.

setTurnOffHighlighting(boolean) - Method in interface nxopen.PartCleanup

Sets the option that specifies whether to turn off highlighting for all displayable objects in the displayed part.

setTurnTrackingPointData(Tag, int, UFCutter.TurnTrackingPointData) - Method in interface nxopen.uf.UFCutter

Refer to UF_CUTTER_set_turn_tracking_point_data for documentation.

setTurnType(InspectionMethodBuilder.ScanHelixTurnTypes) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTurnType(InspectionMethodBuilder.ScanHelixTurnTypes) - Method in interface nxopen.cam.InspectionScanHelixBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTurret(NXObject) - Method in interface nxopen.cam.ConvertFromMCDBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setTurretPocketNumber(int) - Method in interface nxopen.cam.ConvertFromMCDBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setTwiHighCycleCutoff(double) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setTwiHighCycleSlopeChange(double) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setTwiLowCycleStressCutoff(double) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setTwiLowCycleStressExtension(double) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setTwin(boolean) - Method in interface nxopen.features.sheetmetal.AeroJoggleBuilder

License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setTwistAngle(double) - Method in interface nxopen.routing.Stock

Sets the twist angle applied to the profile.

setTwistAngleReverseDirection(boolean) - Method in interface nxopen.features.GlobalShapingBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setTwistOrigin(Point) - Method in interface nxopen.cae.ElementExtrudeBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setTwistPoint(Point) - Method in interface nxopen.routing.RouteSweptTwistBuilder

License requirements: routing_harness ("Routing Harness")
.

setTwistRateAcceptableColor(NXColor) - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setTwistRateFailureColor(NXColor) - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setTwistRateFailureLimit(double) - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setTwistRateWarningColor(NXColor) - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setTwistRateWarningLimit(double) - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setTwoDiagonalPoints(Point3d, Point3d) - Method in interface nxopen.features.BlockFeatureBuilder

Create a block by setting two diagonal points, one at the block origin and one at the opposite corner point.

setTwoDPlanningView(boolean) - Method in interface nxopen.linedesigner.PlanViewManager

Set/Unset 2D Planning view
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setTwoLineToleranceTextSize(double) - Method in interface nxopen.annotations.LetteringStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setTwoPoints(Point, Point, DatumAxisBuilder.UseArcLength) - Method in interface nxopen.features.DatumAxisBuilder

Sets two points
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setTwoPointsAndHeight(Point3d, Point3d, String) - Method in interface nxopen.features.BlockFeatureBuilder

Create a block by setting the block height and two diagonal points in the WCS x-y plane.

setTwoSidedLight(boolean) - Method in interface nxopen.drawings.ShadingViewStyle

Sets the two sided light toggle data.

setTwoSidedLight(boolean) - Method in interface nxopen.drawings.ViewStyleShadingBuilder

License requirements: drafting ("DRAFTING")
.

setTwoSidedLight(boolean) - Method in interface nxopen.preferences.ShadingViewPreferences

Sets the two sided light toggle data.

setTwoSidedLight(boolean) - Method in interface nxopen.preferences.ViewVisualizationVisual

Sets the two sided light flag.

setTx(InspectionAnalyzeBuilder.DofTypes) - Method in interface nxopen.cam.InspectionAnalyzeBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTxIntpDataType(Tag, UFScop.TxIntpDataType) - Method in interface nxopen.uf.UFScop

Refer to UF_SCOP_set_tx_intp_data_type for documentation.

setTxIntpMethod(Tag, UFScop.TxIntpMethod) - Method in interface nxopen.uf.UFScop

Refer to UF_SCOP_set_tx_intp_method for documentation.

setTxIntpVectorData(Tag, int, UFScop.VectorData) - Method in interface nxopen.uf.UFScop

Refer to UF_SCOP_set_tx_intp_vector_data for documentation.

setTxLower(double) - Method in interface nxopen.cam.InspectionAnalyzeBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTxUpper(double) - Method in interface nxopen.cam.InspectionAnalyzeBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTy(InspectionAnalyzeBuilder.DofTypes) - Method in interface nxopen.cam.InspectionAnalyzeBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTyLower(double) - Method in interface nxopen.cam.InspectionAnalyzeBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setType(BaseOrdinateDimensionBuilder.Types) - Method in interface nxopen.annotations.BaseOrdinateDimensionBuilder

License requirements: drafting ("DRAFTING")
.

setType(Centerline2dBuilder.Types) - Method in interface nxopen.annotations.Centerline2dBuilder

License requirements: drafting ("DRAFTING")
.

setType(CircleCenterlineBuilder.Types) - Method in interface nxopen.annotations.CircleCenterlineBuilder

License requirements: drafting ("DRAFTING")
.

setType(DatumTargetBuilder.Types) - Method in interface nxopen.annotations.DatumTargetBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setType(IdSymbolBuilder.SymbolTypes) - Method in interface nxopen.annotations.IdSymbolBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setType(RegionBuilder.Types) - Method in interface nxopen.annotations.RegionBuilder

License requirements: geometric_tol ("GDT")
.

setType(SymmetricalCenterlineBuilder.Types) - Method in interface nxopen.annotations.SymmetricalCenterlineBuilder

License requirements: drafting ("DRAFTING")
.

setType(BoundingVolumeBuilder.Types) - Method in interface nxopen.cae.BoundingVolumeBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setType(CAEConnectionBuilder.ConnectionTypeEnum) - Method in interface nxopen.cae.CAEConnectionBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setType(EdgeSticherBuilder.Types) - Method in interface nxopen.cae.EdgeSticherBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setType(ElementConnectivityBuilder.Types) - Method in interface nxopen.cae.ElementConnectivityBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setType(ElementSplitBuilder.Types) - Method in interface nxopen.cae.ElementSplitBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setType(MMCCreateBuilder.Types) - Method in interface nxopen.cae.MMCCreateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setType(NodesBetweenNodesBuilder.TypeEnum) - Method in interface nxopen.cae.NodesBetweenNodesBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setType(PolygonFaceOnMeshBuilder.PolygonFaceOnMeshType) - Method in interface nxopen.cae.PolygonFaceOnMeshBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setType(SweepBetweenMeshBuilder.Types) - Method in interface nxopen.cae.SweepBetweenMeshBuilder

Deprecated.

Deprecated in NX10.0.0. Use CAE.Mesh3dHexBuilder .

setType(BladeFinishGeom.Types) - Method in interface nxopen.cam.BladeFinishGeom

License requirements: cam_base ("CAM BASE")
.

setType(BladeStartPoint.Types) - Method in interface nxopen.cam.BladeStartPoint

License requirements: None.

setType(BoundaryTurnMemberCorner.CornerType) - Method in interface nxopen.cam.BoundaryTurnMemberCorner

License requirements: cam_base ("CAM BASE")
.

setType(BoundaryTurnMemberFineFinishCorner.ValueType) - Method in interface nxopen.cam.BoundaryTurnMemberFineFinishCorner

License requirements: cam_base ("CAM BASE")
.

setType(BoundaryTurnMemberFineFinishOffset.TypeValue) - Method in interface nxopen.cam.BoundaryTurnMemberFineFinishOffset

License requirements: cam_base ("CAM BASE")
.

setType(ChipControl.Types) - Method in interface nxopen.cam.ChipControl

License requirements: cam_base ("CAM BASE")
.

setType(CutAngle.Types) - Method in interface nxopen.cam.CutAngle

License requirements: cam_base ("CAM BASE")
.

setType(CutBand.Types) - Method in interface nxopen.cam.CutBand

License requirements: None.

setType(Cutcom.Types) - Method in interface nxopen.cam.Cutcom

License requirements: cam_base ("CAM BASE")
.

setType(CutDirection.Types) - Method in interface nxopen.cam.CutDirection

License requirements: cam_base ("CAM BASE")
.

setType(CutDwell.Types) - Method in interface nxopen.cam.CutDwell

License requirements: cam_base ("CAM BASE")
.

setType(CutStrategy.Types) - Method in interface nxopen.cam.CutStrategy

License requirements: cam_base ("CAM BASE")
.

setType(FacesSequence.Types) - Method in interface nxopen.cam.FacesSequence

License requirements: cam_base ("CAM BASE")
.

setType(FeatureProcessBuilder.FeatureProcessType) - Method in interface nxopen.cam.FeatureProcessBuilder

License requirements: ug_holemaking ("UG Holemaking")
.

setType(FinishDwell.Types) - Method in interface nxopen.cam.FinishDwell

License requirements: cam_base ("CAM BASE")
.

setType(LevelToLevel.Types) - Method in interface nxopen.cam.LevelToLevel

License requirements: cam_base ("CAM BASE")
.

setType(MaxCutTraverse.Types) - Method in interface nxopen.cam.MaxCutTraverse

License requirements: cam_base ("CAM BASE")
.

setType(NcmTransfer.TransferTypes) - Method in interface nxopen.cam.NcmTransfer

License requirements: cam_base ("CAM BASE")
.

setType(ProfileStrategy.Types) - Method in interface nxopen.cam.ProfileStrategy

License requirements: cam_base ("CAM BASE")
.

setType(RampingMode.Types) - Method in interface nxopen.cam.RampingMode

License requirements: cam_base ("CAM BASE")
.

setType(ReliefPlunge.Types) - Method in interface nxopen.cam.ReliefPlunge

License requirements: cam_base ("CAM BASE")
.

setType(Sequence.Types) - Method in interface nxopen.cam.Sequence

License requirements: None.

setType(SplitSubopCommand.Types) - Method in interface nxopen.cam.SplitSubopCommand

License requirements: None.

setType(SpringPasses.Types) - Method in interface nxopen.cam.SpringPasses

License requirements: cam_base ("CAM BASE")
.

setType(SteepContainment.Types) - Method in interface nxopen.cam.SteepContainment

License requirements: cam_base ("CAM BASE")
.

setType(StopPosition.Types) - Method in interface nxopen.cam.StopPosition

License requirements: cam_base ("CAM BASE")
.

setType(ToolAxisTilt.Types) - Method in interface nxopen.cam.ToolAxisTilt

License requirements: cam_base ("CAM BASE")
.

setType(TurnConcaveCornerControl.Types) - Method in interface nxopen.cam.TurnConcaveCornerControl

License requirements: cam_base ("CAM BASE")
.

setType(TurnCornerControl.Types) - Method in interface nxopen.cam.TurnCornerControl

License requirements: cam_base ("CAM BASE")
.

setType(TurnDirection.Types) - Method in interface nxopen.cam.TurnDirection

License requirements: cam_base ("CAM BASE")
.

setType(TurnOverlap.Types) - Method in interface nxopen.cam.TurnOverlap

License requirements: cam_base ("CAM BASE")
.

setType(ClampingSlotBuilder.Types) - Method in interface nxopen.die.ClampingSlotBuilder

License requirements: ug_die_design ("Die Design")
.

setType(ClearanceBuilder.Types) - Method in interface nxopen.die.ClearanceBuilder

License requirements: ug_die_design ("Die Design")
.

setType(CompensateRoughDataBuilder.Types) - Method in interface nxopen.die.CompensateRoughDataBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setType(FillAreaBuilder.Types) - Method in interface nxopen.die.FillAreaBuilder

License requirements: ug_die_design ("Die Design")
.

setType(FingerClearanceNotchBuilder.Types) - Method in interface nxopen.die.FingerClearanceNotchBuilder

License requirements: ug_die_design ("Die Design")
.

setType(HandlingCoreBuilder.Types) - Method in interface nxopen.die.HandlingCoreBuilder

License requirements: ug_die_design ("Die Design")
.

setType(HeelpostBuilder.Types) - Method in interface nxopen.die.HeelpostBuilder

License requirements: ug_die_design ("Die Design")
.

setType(KeywayBuilder.Types) - Method in interface nxopen.die.KeywayBuilder

License requirements: ug_die_design ("Die Design")
.

setType(MachineReliefBuilder.Types) - Method in interface nxopen.die.MachineReliefBuilder

License requirements: ug_die_design ("Die Design")
.

setType(QuickBinderBuilder.Types) - Method in interface nxopen.die.QuickBinderBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setType(QuickBinderWrapBuilder.Types) - Method in interface nxopen.die.QuickBinderWrapBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setType(ThroatParentBuilder.TypeOption) - Method in interface nxopen.die.ThroatParentBuilder

Sets the type of throat sections.

setType(CameraBuilder.Types) - Method in interface nxopen.display.CameraBuilder

License requirements: None.

setType(DynamicSectionTypes.Type) - Method in interface nxopen.display.DynamicSectionBuilder

License requirements: None.

setType(DetailViewBuilder.Types) - Method in interface nxopen.drawings.DetailViewBuilder

License requirements: drafting ("DRAFTING")
.

setType(SectionLineBuilder.Types) - Method in interface nxopen.drawings.SectionLineBuilder

Deprecated.

Deprecated in NX10.0.0. Use Drawings.SectionViewBuilder#sectionViewType

setType(SectionLineSegmentBuilder.Types) - Method in interface nxopen.drawings.SectionLineSegmentBuilder

License requirements: drafting ("DRAFTING")
.

setType(ViewCopyTo3dBuilder.Types) - Method in interface nxopen.drawings.ViewCopyTo3dBuilder

License requirements: nx_layout ("NX Layout")
.

setType(ViewProjectionBuilder.Types) - Method in interface nxopen.drawings.ViewProjectionBuilder

License requirements: nx_layout ("NX Layout")
.

setType(ExtrudeFacetBodyBuilder.LimitType) - Method in interface nxopen.facet.ExtrudeFacetBodyBuilder

License requirements: studio_free_form ("STUDIO FREE FORM") OR die_engineering ("DIE ENGINEERING")
.

setType(FillHoleBuilder.Types) - Method in interface nxopen.facet.FillHoleBuilder

License requirements: None.

setType(SnipFacetBodyBuilder.Types) - Method in interface nxopen.facet.SnipFacetBodyBuilder

License requirements: None.

setType(AssociativeArcBuilder.Types) - Method in interface nxopen.features.AssociativeArcBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setType(BlockFeatureBuilder.Types) - Method in interface nxopen.features.BlockFeatureBuilder

License requirements: None.

setType(ConeBuilder.Types) - Method in interface nxopen.features.ConeBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setType(CylinderBuilder.Types) - Method in interface nxopen.features.CylinderBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setType(DatumAxisBuilder.Types) - Method in interface nxopen.features.DatumAxisBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setType(DeleteFaceBuilder.SelectTypes) - Method in interface nxopen.features.DeleteFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setType(DivideCurveBuilder.Types) - Method in interface nxopen.features.DivideCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setType(DraftBodyBuilder.Types) - Method in interface nxopen.features.DraftBodyBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setType(ExtensionBuilder.Types) - Method in interface nxopen.features.ExtensionBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING")
.

setType(ExtractFaceBuilder.ExtractType) - Method in interface nxopen.features.ExtractFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setType(FitCurveBuilder.Types) - Method in interface nxopen.features.FitCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setType(FitSurfaceBuilder.Types) - Method in interface nxopen.features.FitSurfaceBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setType(FlatteningAndFormingBuilder.Types) - Method in interface nxopen.features.FlatteningAndFormingBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setType(GeneralConicBuilder.Types) - Method in interface nxopen.features.GeneralConicBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setType(GeomcopyBuilder.TransformTypes) - Method in interface nxopen.features.GeomcopyBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setType(GuidedExtensionBuilderEx.Types) - Method in interface nxopen.features.GuidedExtensionBuilderEx

License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setType(HelixBuilder.Types) - Method in interface nxopen.features.HelixBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setType(HolePackageBuilder.Types) - Method in interface nxopen.features.HolePackageBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setType(LawExtensionBuilder.Types) - Method in interface nxopen.features.LawExtensionBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING")
.

setType(LawExtensionBuilderEx.Types) - Method in interface nxopen.features.LawExtensionBuilderEx

License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING")
.

setType(MatchEdgeBuilder.Types) - Method in interface nxopen.features.MatchEdgeBuilder

License requirements: features_modeling ("FEATURES MODELING")
.

setType(MatchedReferenceBuilder.Types) - Method in interface nxopen.features.MatchedReferenceBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setType(MoveFaceBuilder.Types) - Method in interface nxopen.features.MoveFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setType(NSidedSurfaceBuilder.SurfaceType) - Method in interface nxopen.features.NSidedSurfaceBuilder

License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

setType(OffsetCurveBuilder.Types) - Method in interface nxopen.features.OffsetCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setType(OffsetEmbossBuilder.Types) - Method in interface nxopen.features.OffsetEmbossBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setType(PatchOpeningsBuilder.Types) - Method in interface nxopen.features.PatchOpeningsBuilder

License requirements: None.

setType(PatternFaceBuilder.PatternTypes) - Method in interface nxopen.features.PatternFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setType(PointSetBuilder.Types) - Method in interface nxopen.features.PointSetBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setType(RefitFaceBuilder.Types) - Method in interface nxopen.features.RefitFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setType(ReplaceFaceBuilder.ReplaceTypes) - Method in interface nxopen.features.ReplaceFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setType(ScaleBuilder.Types) - Method in interface nxopen.features.ScaleBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setType(SectionCurveBuilder.PlaneType) - Method in interface nxopen.features.SectionCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setType(SectionInertiaAnalysisBuilder.Types) - Method in interface nxopen.features.SectionInertiaAnalysisBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setType(SectionSurfaceBuilder.Types) - Method in interface nxopen.features.SectionSurfaceBuilder

Deprecated.

Deprecated in NX9.0.0. Use SectionSurfaceBuilderEx instead.

setType(SectionSurfaceBuilderEx.Types) - Method in interface nxopen.features.SectionSurfaceBuilderEx

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setType(SewBuilder.Types) - Method in interface nxopen.features.SewBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setType(AdvancedFlangeBuilder.Types) - Method in interface nxopen.features.sheetmetal.AdvancedFlangeBuilder

License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setType(AeroLighteningCutoutBuilder.Types) - Method in interface nxopen.features.sheetmetal.AeroLighteningCutoutBuilder

License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setType(BreakCornerBuilder.TypeOptions) - Method in interface nxopen.features.sheetmetal.BreakCornerBuilder

Sets the type of the break corner.

setType(BridgeTransitionBuilder.TypeOptions) - Method in interface nxopen.features.sheetmetal.BridgeTransitionBuilder

License requirements: nx_flexible_pcb ("NX Flexible PCB") OR nx_sheet_metal ("NX Sheet Metal")
.

setType(ClosedCornerBuilder.Types) - Method in interface nxopen.features.sheetmetal.ClosedCornerBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setType(ExportFlatPatternBuilder.FileType) - Method in interface nxopen.features.sheetmetal.ExportFlatPatternBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setType(GussetBuilder.Types) - Method in interface nxopen.features.sheetmetal.GussetBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setType(HemFlangeBuilder.TypeOptions) - Method in interface nxopen.features.sheetmetal.HemFlangeBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setType(LighteningCutoutBuilder.CutoutType) - Method in interface nxopen.features.sheetmetal.LighteningCutoutBuilder

License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setType(NormalCutoutBuilder.TypeOptions) - Method in interface nxopen.features.sheetmetal.NormalCutoutBuilder

Sets the type for the normal cutout.

setType(ResizeBendRadiusBuilder.Types) - Method in interface nxopen.features.sheetmetal.ResizeBendRadiusBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setType(SolidPunchBuilder.Types) - Method in interface nxopen.features.sheetmetal.SolidPunchBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal") OR sheet_metal_design ("SHEET METAL DESIGN")
.

setType(BulkHeadsBuilder.BulkheadType) - Method in interface nxopen.features.shipdesign.BulkHeadsBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setType(CuttingSideFacesBuilder.Types) - Method in interface nxopen.features.shipdesign.CuttingSideFacesBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setType(DeckBuilder.Types) - Method in interface nxopen.features.shipdesign.DeckBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setType(EdgeReinforcementBuilder.Types) - Method in interface nxopen.features.shipdesign.EdgeReinforcementBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setType(ExcessMaterialBuilder.Types) - Method in interface nxopen.features.shipdesign.ExcessMaterialBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setType(FeaturesBatchOperationBuilder.Types) - Method in interface nxopen.features.shipdesign.FeaturesBatchOperationBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setType(GenericPlateSystemBuilder.Types) - Method in interface nxopen.features.shipdesign.GenericPlateSystemBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setType(HullBuilder.Types) - Method in interface nxopen.features.shipdesign.HullBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setType(InsertFramesBuilder.Types) - Method in interface nxopen.features.shipdesign.InsertFramesBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setType(LongitudinalBulkheadBuilder.Types) - Method in interface nxopen.features.shipdesign.LongitudinalBulkheadBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setType(PillarSystemBuilder.Types) - Method in interface nxopen.features.shipdesign.PillarSystemBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setType(PlateBuilder.Types) - Method in interface nxopen.features.shipdesign.PlateBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setType(PlateChamferBuilder.Types) - Method in interface nxopen.features.shipdesign.PlateChamferBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setType(ProfileBuilder.TypeOption) - Method in interface nxopen.features.shipdesign.ProfileBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setType(RollingLineBuilder.Types) - Method in interface nxopen.features.shipdesign.RollingLineBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setType(SeamBuilder.Types) - Method in interface nxopen.features.shipdesign.SeamBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setType(ShellTemplateBuilder.Types) - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setType(ShipDesignPreferencesBuilder.Types) - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder

Deprecated.

Deprecated in NX9.0.0. Set the active ship structure using ShipDesignPreferencesBuilder.setShipStructureType(nxopen.features.shipdesign.ShipDesignPreferencesBuilder.Types) .

setType(ShipPreparationInfo.Types) - Method in interface nxopen.features.shipdesign.ShipPreparationInfo

License requirements: nx_ship_basic ("Ship Basic Design")
.

setType(SteelDistributionBuilder.SaType) - Method in interface nxopen.features.shipdesign.SteelDistributionBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setType(StiffenerBuilder.Types) - Method in interface nxopen.features.shipdesign.StiffenerBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setType(StiffenerSystemBuilder.Types) - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setType(TransverseBulkheadBuilder.Types) - Method in interface nxopen.features.shipdesign.TransverseBulkheadBuilder

License requirements: nx_ship_basic ("Ship Basic Design")
.

setType(SilhouetteFlangeBuilder.Types) - Method in interface nxopen.features.SilhouetteFlangeBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setType(SmoothCurveStringBuilder.Types) - Method in interface nxopen.features.SmoothCurveStringBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setType(SmoothSplineBuilder.Types) - Method in interface nxopen.features.SmoothSplineBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setType(SnipSurfaceBuilder.Types) - Method in interface nxopen.features.SnipSurfaceBuilder

License requirements: None.

setType(SphereBuilder.Types) - Method in interface nxopen.features.SphereBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setType(StudioSplineBuilderEx.Types) - Method in interface nxopen.features.StudioSplineBuilderEx

License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setType(StudioXformBuilder.Types) - Method in interface nxopen.features.StudioXformBuilder

Deprecated.

Deprecated in NX8.5.0. Use StudioXformBuilderEx instead.

setType(StudioXformBuilderEx.Types) - Method in interface nxopen.features.StudioXformBuilderEx

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setType(StyledBlendBuilder.Types) - Method in interface nxopen.features.StyledBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setType(StyledSweepBuilder.Types) - Method in interface nxopen.features.StyledSweepBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setType(SubdivisionPrimitiveShapeBuilder.Types) - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilder

Deprecated.

Deprecated in NX11.0.0. Use SubdivisionPrimitiveShapeBuilderEx instead.

setType(SubdivisionPrimitiveShapeBuilderEx.Types) - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilderEx

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setType(SubdivisionProjectCageBuilder.Types) - Method in interface nxopen.features.subdivision.SubdivisionProjectCageBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setType(SubdivisionSplitFaceBuilder.Types) - Method in interface nxopen.features.subdivision.SubdivisionSplitFaceBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setType(TextBuilder.Types) - Method in interface nxopen.features.TextBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setType(ToolingBoxBuilder.Types) - Method in interface nxopen.features.ToolingBoxBuilder

License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard") OR studio_free_form ("STUDIO FREE FORM") OR features_modeling ("FEATURES MODELING") OR solid_modeling ("SOLIDS MODELING")
.

setType(TrimExtendBuilder.CreationTypes) - Method in interface nxopen.features.TrimExtendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setType(VarOffsetFaceBuilder.Types) - Method in interface nxopen.features.VarOffsetFaceBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setType(AllAroundVisionBuilder.Types) - Method in interface nxopen.features.vehicledesign.AllAroundVisionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setType(BaseDataLoadingBuilder.LoadingType) - Method in interface nxopen.features.vehicledesign.BaseDataLoadingBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setType(PedestrianProtectionBuilder.Types) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setType(VehicleCoordinateSystemBuilder.Types) - Method in interface nxopen.features.vehicledesign.VehicleCoordinateSystemBuilder

License requirements: nx_general_packaging ("NX General Packaging") OR ug_body_design ("Body Design") OR nx_posture ("NX Jack Posture Prediction")
.

setType(VirtualCurveBuilder.Types) - Method in interface nxopen.features.VirtualCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setType(WaveLinkBuilder.Types) - Method in interface nxopen.features.WaveLinkBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setType(WrapBuilder.Types) - Method in interface nxopen.features.WrapBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setType(FlatteningBuilder.Types) - Method in interface nxopen.FlatteningBuilder

Deprecated.

Deprecated in NX11.0.0. Use FlatteningAndFormingBuilder instead.

setType(FaceAnnotationBuilder.Types) - Method in interface nxopen.formboard.FaceAnnotationBuilder

License requirements: routing_harness ("Routing Harness")
.

setType(PathLengthAnnotationBuilder.Types) - Method in interface nxopen.formboard.PathLengthAnnotationBuilder

License requirements: routing_harness ("Routing Harness")
.

setType(DeviationChecking.Types) - Method in interface nxopen.geometricanalysis.DeviationChecking

License requirements: None.

setType(HighlightLinesAnalysisBuilder.Types) - Method in interface nxopen.geometricanalysis.HighlightLinesAnalysisBuilder

Deprecated.

Deprecated in NX8.0.0. Use HighlightLinesAnalysisBuilder.lightPlacement() and HighlightLinesAnalysisBuilder.setLightPlacement(nxopen.geometricanalysis.HighlightLinesAnalysisBuilder.LightPlacements) instead.

setType(RadiusAnalysisBuilder.Types) - Method in interface nxopen.geometricanalysis.RadiusAnalysisBuilder

License requirements: None.

setType(ReflectionAnalysisBuilder.Types) - Method in interface nxopen.geometricanalysis.ReflectionAnalysisBuilder

License requirements: None.

setType(SectionAnalysisBuilder.Types) - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setType(SurfaceContinuityAnalysisBuilder.Types) - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder

License requirements: gateway ("UG GATEWAY")
.

setType(BooleanOperation.BooleanType) - Method in interface nxopen.geometricutilities.BooleanOperation

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setType(AssignCornerBuilder.CornerType) - Method in interface nxopen.mechanicalrouting.AssignCornerBuilder

License requirements: routing_base ("Routing Basic")
.

setType(GanttOperationBuilder.SimpleOperationType) - Method in interface nxopen.mechatronics.GanttOperationBuilder

License requirements: None.

setType(ControlInputBuilder.InputType) - Method in interface nxopen.motion.ControlInputBuilder

License requirements: mechanisms ("MECHANISMS")
.

setType(MotionSensorBuilder.Types) - Method in interface nxopen.motion.MotionSensorBuilder

License requirements: mechanisms ("MECHANISMS")
.

setType(PlantOutputBuilder.Poutype) - Method in interface nxopen.motion.PlantOutputBuilder

License requirements: nx_motion_cosim ("NX Motion CoSimulation")
.

setType(AssignDiscontinuityBuilder.Types) - Method in interface nxopen.routing.AssignDiscontinuityBuilder

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setType(FittingOverstockBuilder.Types) - Method in interface nxopen.routing.FittingOverstockBuilder

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setType(SubdivideSegmentBuilder.Types) - Method in interface nxopen.routing.SubdivideSegmentBuilder

License requirements: routing_base ("Routing Basic")
.

setType(WindCatcherBuilder.WindCatcherType) - Method in interface nxopen.routing.WindCatcherBuilder

License requirements: routing_hvac ("Routing HVAC")
.

setType(KinematicAxisBuilder.AxisMotionType) - Method in interface nxopen.sim.KinematicAxisBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setType(KinematicChain.Types) - Method in interface nxopen.sim.KinematicChain

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setType(SpreadsheetCellData.Types) - Method in interface nxopen.SpreadsheetCellData

License requirements: None.

setType(AssemblyDrawingBuilder.Types) - Method in interface nxopen.tooling.AssemblyDrawingBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setType(AssignPatchBuilder.Types) - Method in interface nxopen.tooling.AssignPatchBuilder

License requirements: None.

setType(AutoDimensionBuilder.MainType) - Method in interface nxopen.tooling.AutoDimensionBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setType(BackingPadBuilder.Types) - Method in interface nxopen.tooling.BackingPadBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setType(BendInsertDesignBuilder.Types) - Method in interface nxopen.tooling.BendInsertDesignBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setType(BendOperationBuilder.Types) - Method in interface nxopen.tooling.BendOperationBuilder

License requirements: None.

setType(BlankGeneratorBuilder.Types) - Method in interface nxopen.tooling.BlankGeneratorBuilder

License requirements: None.

setType(BlankLayoutBuilder.Types) - Method in interface nxopen.tooling.BlankLayoutBuilder

License requirements: None.

setType(ChangeoverManagementBuilder.Types) - Method in interface nxopen.tooling.ChangeoverManagementBuilder

License requirements: None.

setType(ConcurrentDesignManagementBuilder.Types) - Method in interface nxopen.tooling.ConcurrentDesignManagementBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setType(CoolingDefineChannelBuilder.Types) - Method in interface nxopen.tooling.CoolingDefineChannelBuilder

License requirements: ug_mold_design ("UG MOLD")
.

setType(CornerDesignBuilder.Types) - Method in interface nxopen.tooling.CornerDesignBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setType(CreateBoxBuilder.BoxType) - Method in interface nxopen.tooling.CreateBoxBuilder

License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard") OR studio_free_form ("STUDIO FREE FORM") OR features_modeling ("FEATURES MODELING") OR solid_modeling ("SOLIDS MODELING")
.

setType(DefineCamBuilder.Types) - Method in interface nxopen.tooling.DefineCamBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setType(DefineLifterBuilder.Types) - Method in interface nxopen.tooling.DefineLifterBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setType(DieBaseBuilder.Types) - Method in interface nxopen.tooling.DieBaseBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setType(DieEngProcessUpdateManagerBuilder.Types) - Method in interface nxopen.tooling.DieEngProcessUpdateManagerBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setType(DirectUnbendBuilder.Bendtypes) - Method in interface nxopen.tooling.DirectUnbendBuilder

License requirements: None.

setType(ElectrodeDeleteBuilder.Types) - Method in interface nxopen.tooling.ElectrodeDeleteBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setType(FaceSplitBuilder.FaceSplitType) - Method in interface nxopen.tooling.FaceSplitBuilder

License requirements: None.

setType(GeneralInsertBuilder.Types) - Method in interface nxopen.tooling.GeneralInsertBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setType(HoleReportBuilder.Types) - Method in interface nxopen.tooling.HoleReportBuilder

License requirements: None.

setType(InsertAuxiliaryBuilder.Types) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder

License requirements: None.

setType(InsertEditToolsBuilder.Types) - Method in interface nxopen.tooling.InsertEditToolsBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setType(LsdynaKfileGeneratorBuilder.OperTypes) - Method in interface nxopen.tooling.LsdynaKfileGeneratorBuilder

License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setType(MotionSimulationBuilder.Types) - Method in interface nxopen.tooling.MotionSimulationBuilder

License requirements: None.

setType(MWCopySheetsBuilder.Types) - Method in interface nxopen.tooling.MWCopySheetsBuilder

License requirements: None.

setType(MWDefineSheetsBuilder.Types) - Method in interface nxopen.tooling.MWDefineSheetsBuilder

License requirements: None.

setType(ObjectAttributeManagementBuilder.ShowType) - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setType(PiercingInsertBuilder.Types) - Method in interface nxopen.tooling.PiercingInsertBuilder

License requirements: None.

setType(QuickQuotationBuilder.Types) - Method in interface nxopen.tooling.QuickQuotationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setType(ReliefDesignBuilder.Types) - Method in interface nxopen.tooling.ReliefDesignBuilder

License requirements: None.

setType(RenameAndExportComponentBuilder.Types) - Method in interface nxopen.tooling.RenameAndExportComponentBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setType(ReusePositioningObjectBuilder.Types) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder

License requirements: None.

setType(ShimBuilder.Types) - Method in interface nxopen.tooling.ShimBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setType(SmartScrewUpdateBuilder.Types) - Method in interface nxopen.tooling.SmartScrewUpdateBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setType(SpecialFormingBuilder.Types) - Method in interface nxopen.tooling.SpecialFormingBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setType(SpecialPiercingInsertBuilder.Types) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setType(SplitSolidBuilder.OperationType) - Method in interface nxopen.tooling.SplitSolidBuilder

License requirements: None.

setType(StockSizeBuilder.Types) - Method in interface nxopen.tooling.StockSizeBuilder

License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setType(SubInsertBuilder.Types) - Method in interface nxopen.tooling.SubInsertBuilder

License requirements: None.

setType(TrimSolidBuilder.Types) - Method in interface nxopen.tooling.TrimSolidBuilder

License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setType(WireHoleBuilder.Types) - Method in interface nxopen.tooling.WireHoleBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setType(WorkpieceBuilder.Types) - Method in interface nxopen.tooling.WorkpieceBuilder

License requirements: None.

setType(ResultObject.ResultTypes) - Method in interface nxopen.validate.ResultObject

License requirements: None.

setType(AutoPointBuilder.Types) - Method in interface nxopen.weld.AutoPointBuilder

License requirements: ugweld ("UG WELD")
.

setType(DatumSurfaceBuilder.Types) - Method in interface nxopen.weld.DatumSurfaceBuilder

License requirements: ugweld ("UG WELD")
.

setType(EasyPatternBuilder.Types) - Method in interface nxopen.weld.EasyPatternBuilder

License requirements: ugweld ("UG WELD")
.

setType(WeldBeadBuilder.Types) - Method in interface nxopen.weld.WeldBeadBuilder

License requirements: ugweld ("UG WELD")
.

setType(WeldGrooveBuilder.Types) - Method in interface nxopen.weld.WeldGrooveBuilder

License requirements: ugweld ("UG WELD")
.

setType(WeldJointBuilder.Types) - Method in interface nxopen.weld.WeldJointBuilder

License requirements: structure_weld ("STRUCTURE WELD")
.

setType2(HighlightLinesAnalysisBuilder.Types2) - Method in interface nxopen.geometricanalysis.HighlightLinesAnalysisBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setTypeAssignOrCheck(ClearanceManagementBuilder.Type) - Method in interface nxopen.tooling.ClearanceManagementBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setTypeDesc(String) - Method in interface nxopen.mechatronics.FunctionObjectBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setTypeEnum(PlatformEquipmentBuilder.TypeAPI) - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setTypeName(String) - Method in interface nxopen.cam.InspectionCreatePathsBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTypeName(String) - Method in interface nxopen.linedesigner.ReuseLibraryDragData

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setTypeName(String) - Method in interface nxopen.mechatronics.LogicObjectBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setTypeOfDraft(DraftBuilder.Type) - Method in interface nxopen.features.DraftBuilder

Sets the Draft type
License requirements: solid_modeling ("SOLIDS MODELING")
.

setTypeOption(LbcAssociationMgr.BcType) - Method in interface nxopen.cae.LbcAssociationMgr

License requirements: nx_masterfem ("Finite Element Modeling")
.

setTypeOption(DriverOperation.Type) - Method in interface nxopen.motion.DriverOperation

License requirements: mechanisms ("MECHANISMS")
.

setTypes(Function.Type, XyFunctionMacroType, XyFunctionGeneralType) - Method in interface nxopen.cae.FunctionBuilder

Sets types of a function
License requirements: nx_ftk ("NX Advanced Graphing")
.

setTypes(String[], String[]) - Method in interface nxopen.pdm.ObjectCreateBuilder

Set Types for which AttributeHolderObject needs to be created.

setTypeStandard(ViewSectionLineBuilder.DisplayType) - Method in interface nxopen.drawings.ViewSectionLineBuilder

License requirements: drafting ("DRAFTING")
.

setTyUpper(double) - Method in interface nxopen.cam.InspectionAnalyzeBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTz(InspectionAnalyzeBuilder.DofTypes) - Method in interface nxopen.cam.InspectionAnalyzeBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTzLower(double) - Method in interface nxopen.cam.InspectionAnalyzeBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setTzUpper(double) - Method in interface nxopen.cam.InspectionAnalyzeBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setUCount(int) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setUde(int, Ude) - Method in interface nxopen.cam.Path

Set the UDE event at the given index; The CAM.Ude API object no longer is valid after this call
License requirements: None.

setUdeEndOfPath(NXObject) - Method in interface nxopen.cam.ToolPathDivideBuilder

License requirements: None.

setUDegree(SectionSurfaceBuilder.UDegreeEnum) - Method in interface nxopen.features.SectionSurfaceBuilder

Deprecated.

Deprecated in NX9.0.0. Use SectionSurfaceBuilderEx instead.

setUDegree(SectionSurfaceBuilderEx.UDegreeType) - Method in interface nxopen.features.SectionSurfaceBuilderEx

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setUDegree(int) - Method in interface nxopen.geometricutilities.DegreesAndSegmentsOrPatchesBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setUdeName(String) - Method in interface nxopen.cam.Ude

License requirements: cam_base ("CAM BASE")
.

setUdeset(NXObject) - Method in interface nxopen.cam.InPathEventDataBuilder

License requirements: cam_base ("CAM BASE")
.

setUdeSetStatus(boolean) - Method in interface nxopen.cam.InPathEventSetData

License requirements: cam_base ("CAM BASE")
.

setUdeStartOfPath(NXObject) - Method in interface nxopen.cam.ToolPathDivideBuilder

License requirements: None.

setUdfParms(Tag, String[], String[], int) - Method in interface nxopen.uf.UFModlGeneral

Refer to UF_MODL_set_udf_parms for documentation.

setUDimension(int, int) - Method in interface nxopen.geometricutilities.ControlPoleManagerData

Sets dimension in U direction of a group of poles
License requirements: studio_free_form ("STUDIO FREE FORM")
.

setUdsSize(UFDrf.UdsSize) - Method in interface nxopen.uf.UFDrf

Refer to UF_DRF_set_uds_size for documentation.

setUEnabled(boolean) - Method in interface nxopen.features.IsoparametricCurvesBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setUEnabled(boolean) - Method in interface nxopen.geometricanalysis.sectionanalysis.IsoparametricBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setUEnd(double) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setUEndDeg(double) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setUEndDist(double) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setUEndMode(InspectionMethodBuilder.UVModeTypes) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setUEndSweep(double) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setUgdefaultSbfFile() - Method in interface nxopen.uf.UFDrf

Refer to UF_DRF_set_ugdefault_sbf_file for documentation.

setUghpglSmallTol(double, int) - Method in interface nxopen.uf.UFPlot

Refer to UF_PLOT_set_ughpgl_small_tol for documentation.

setUghpglTol(double, int) - Method in interface nxopen.uf.UFPlot

Refer to UF_PLOT_set_ughpgl_tol for documentation.

setUiSetting(SimDebugBuilder.UiType, boolean) - Method in interface nxopen.sim.SimDebugBuilder

Sets the debug setting
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setUmData(int[]) - Method in interface nxopen.cae.InterpolationEADBuilder

The set_um_data operator sets the array of 12 um_data values
License requirements: nx_masterfem ("Finite Element Modeling")
.

setUnassignedAxis(String) - Method in interface nxopen.sim.KinematicChannelBuilder

Sets an unassigned axis of the channel
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setUnattachedNodesInBoundingBoxRatio(double) - Method in interface nxopen.cae.ModelDisplayBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setUncutRegionColor(NXColor) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setUndefValueColor(NXColor) - Method in interface nxopen.fields.DisplayPropertiesBuilder

License requirements: None.

setUndercutsChecker(boolean) - Method in interface nxopen.features.AnalyzePocketBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setUndoMark(Session.MarkVisibility, String) - Method in interface nxopen.Session

Creates an undo mark
License requirements: None.

setUndoMarkName(int, String) - Method in interface nxopen.Session

Sets the name of the undo mark
License requirements: None.

setUndoMarkVisibility(int, String, Session.MarkVisibility) - Method in interface nxopen.Session

Sets the visibility of the specified undo mark
License requirements: None.

setUnfoldModeType(OnestepUnformBuilder.UnfoldMode) - Method in interface nxopen.bodydes.OnestepUnformBuilder

License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setUnfoldSolid(Body) - Method in interface nxopen.bodydes.OnestepUnformBuilder

License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setUnfoldType(DirectUnfoldBuilder.Types) - Method in interface nxopen.tooling.DirectUnfoldBuilder

License requirements: None.

setUnformFaceCollector(ScCollector) - Method in interface nxopen.features.sheetmetal.AeroReformBuilder

License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setUnformNeutralFactor(double) - Method in interface nxopen.tooling.UniversalUnformBuilder

Deprecated.

Deprecated in NX10.0.0. Use Tooling.DefineNeutralFactorBuilder#setNeutralFactor instead.

setUnformSection(Section) - Method in interface nxopen.bodydes.OnestepUnformBuilder

License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setUngroupLevel(GroupBuilder.UngroupOption) - Method in interface nxopen.GroupBuilder

License requirements: None.

setUniformSpacingTolerance(double) - Method in interface nxopen.weld.AutoPointBuilder

License requirements: ugweld ("UG WELD")
.

setUniformU(boolean) - Method in interface nxopen.features.FitSurfaceBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setUniformV(boolean) - Method in interface nxopen.features.FitSurfaceBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setUnifyCharacteristics(NXObject.AttributeType, String, String) - Method in interface nxopen.routing.UnifyPathBuilder

Sets the characteristics to be applied
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setUniqueIdentifier(String) - Method in interface nxopen.BasePart

License requirements: None.

setUniqueMembership(boolean) - Method in interface nxopen.ObjectGeneralPropertiesBuilder

License requirements: None.

setUniqueMembership(Tag) - Method in interface nxopen.uf.UFGroup

Refer to UF_GROUP_set_unique_membership for documentation.

setUniqueMembershipOption(boolean) - Method in interface nxopen.GroupBuilder

License requirements: None.

setUnit(int) - Method in interface nxopen.annotations.ImportAutocadBlockBuilder

License requirements: nx_layout ("NX Layout")
.

setUnit(XyFunctionUnit) - Method in interface nxopen.cae.AfuZHeaderInfo

Sets the unit type of Z axis
License requirements: nx_ftk ("NX Advanced Graphing")
.

setUnit(Unit) - Method in interface nxopen.cae.CrossSectionParameters

Set result unit
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setUnit(Unit) - Method in interface nxopen.cae.ResultMeasureResultOptions

Set the unit
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setUnit(Unit) - Method in interface nxopen.cae.ResultParameters

Set result unit
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setUnit(Unit) - Method in interface nxopen.cae.ResultParametersWithProbe

Set result unit
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setUnit(Unit) - Method in interface nxopen.cae.ResultProbeBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setUnit(FeedRateUnit) - Method in interface nxopen.cam.InheritableFeedBuilder

License requirements: cam_base ("CAM BASE")
.

setUnit(ReliefPlunge.UnitTypes) - Method in interface nxopen.cam.ReliefPlunge

License requirements: cam_base ("CAM BASE")
.

setUnit(InitProjectBuilder.UnitId) - Method in interface nxopen.tooling.InitProjectBuilder

License requirements: None.

setUnitBasis(boolean) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setUnitBasis(Tag, UFGdt.ModifierTypes, UFGdt.UnitBasis) - Method in interface nxopen.uf.UFGdt

Refer to UF_GDT_set_unit_basis for documentation.

setUnitBasisValue1(String) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setUnitBasisValue2(String) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setUniteBodies(boolean) - Method in interface nxopen.tooling.ElectrodeBlankBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setUnitEffectivityValue(int) - Method in interface nxopen.BasicEffectivityBuilder

License requirements: None.

setUnitLabel(String) - Method in interface nxopen.cae.AfuAbscissaHeaderInfo

Sets the customized unit label
License requirements: nx_ftk ("NX Advanced Graphing")
.

setUnitLabel(String) - Method in interface nxopen.cae.AfuOrdinateHeaderInfo

Sets the customized unit label
License requirements: nx_ftk ("NX Advanced Graphing")
.

setUnitName(String) - Method in interface nxopen.cae.ftk.BaseUnit

Sets unit name
License requirements: nx_ftk ("NX Advanced Graphing")
.

setUnits(String) - Method in interface nxopen.AttributePropertiesBaseBuilder

License requirements: None.

setUnits(String) - Method in interface nxopen.AttributeTemplatesBuilder

License requirements: None.

setUnits(TaggedObject) - Method in interface nxopen.blockstyler.AngularDimension

License requirements: None.

setUnits(TaggedObject) - Method in interface nxopen.blockstyler.ExpressionBlock

License requirements: None.

setUnits(TaggedObject) - Method in interface nxopen.blockstyler.LinearDimension

License requirements: None.

setUnits(TaggedObject) - Method in interface nxopen.blockstyler.OnPathDimension

License requirements: None.

setUnits(TaggedObject) - Method in interface nxopen.blockstyler.RadiusDimension

License requirements: None.

setUnits(XyFunctionUnit, XyFunctionUnit, XyFunctionUnit) - Method in interface nxopen.cae.FunctionBuilder

Sets units of a function
License requirements: nx_ftk ("NX Advanced Graphing")
.

setUnits(CGMBuilder.UnitsOption) - Method in interface nxopen.CGMBuilder

License requirements: None.

setUnits(AnnotationSettingsBuilder.UnitsEnum) - Method in interface nxopen.drawings.AnnotationSettingsBuilder

License requirements: convert_to_pmi (" Convert To PMI"), drafting ("DRAFTING")
.

setUnits(DrawingSheetBuilder.SheetUnits) - Method in interface nxopen.drawings.DrawingSheetBuilder

License requirements: drafting ("DRAFTING")
.

setUnits(DxfdwgImporter.UnitsEnum) - Method in interface nxopen.DxfdwgImporter

License requirements: None.

setUnits(Unit) - Method in interface nxopen.Expression

License requirements: None.

setUnits(int) - Method in interface nxopen.features.SectionInertiaAnalysisBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setUnits(Part.Units) - Method in interface nxopen.FileNew

License requirements: None.

setUnits(SolidDensity.UnitsType) - Method in interface nxopen.geometricanalysis.SolidDensity

License requirements: None.

setUnits(PlotBuilder.UnitsOption) - Method in interface nxopen.PlotBuilder

License requirements: None.

setUnits(PrintPDFBuilder.UnitsOption) - Method in interface nxopen.PrintPDFBuilder

License requirements: None.

setUnits(Unit) - Method in interface nxopen.ScalarMatrixValue

License requirements: None.

setUnits(int) - Method in interface nxopen.WidthDefinition

License requirements: None.

setUnitsEnum(StudioImageCaptureBuilder.UnitsEnumType) - Method in interface nxopen.display.StudioImageCaptureBuilder

License requirements: None.

setUnitsEnum(InsertSheetBuilder.APIUnits) - Method in interface nxopen.linedesigner.InsertSheetBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setUnitsFormatPreferences(UnitsFormatPreferences) - Method in interface nxopen.annotations.DimensionPreferences

Sets the units and format preferences
License requirements: None.

setUnitsFormatPreferences(UFDrf.UnitsFormatPreferences) - Method in interface nxopen.uf.UFDrf

Refer to UF_DRF_set_units_format_preferences for documentation.

setUnitsFormatPrefs(UnitsFormatPreferences) - Method in interface nxopen.annotations.BaseSurfaceFinish

Sets the unit format preferences.

setUnitsSystem(Result.ResultBasicUnit) - Method in interface nxopen.cae.ImportedSolutionBuilder

The units system
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setUnitsSystem(ResultsManipulationBuilder.UnitsSystem) - Method in interface nxopen.cae.ResultsManipulationBuilder

The units system
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setUnitsSystemResult(Result) - Method in interface nxopen.cae.ResultsManipulationBuilder

The result to copy the units system from
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setUnitsToggle(boolean) - Method in interface nxopen.cam.FeedsWedmBuilder

License requirements: cam_base ("CAM BASE")
.

setUnitSystem(UnitSystem) - Method in interface nxopen.cae.xyplot.AxisStyleSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setUnitSystem(FlexBodyBuilder.UnitSystemType) - Method in interface nxopen.motion.FlexBodyBuilder

License requirements: mechanisms ("MECHANISMS")
.

setUnlinkInstances(boolean) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setUnloadingVerticalStiffness(MotionFunction) - Method in interface nxopen.motion.TirePropertyHighOrderParameters

License requirements: mechanisms ("MECHANISMS")
.

setUnmappedFaceThreshold(double) - Method in interface nxopen.cae.LaminateImportedLayupBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setUnmatchedGroupEnabled(boolean) - Method in interface nxopen.visualreporting.VisualReport

License requirements: nx_visual_reporting ("Visual Reporting")
.

setUnpopulatedBehaviour(SessionPdm.UnpopulatedBehaviourType) - Method in interface nxopen.preferences.SessionPdm

License requirements: None.

setUnreferencedSpindle(String) - Method in interface nxopen.sim.KinematicChannelBuilder

Sets an unreferenced spindle of the channel
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setUnSelectedLayers(String) - Method in interface nxopen.DxfdwgImporter

License requirements: None.

setUnsolvedCurvesColor(int) - Method in interface nxopen.preferences.PartSketch

Sets the sketch unsolved curves color
License requirements: None.

setUnspecifiedColor(NXColor) - Method in interface nxopen.cae.BCSelectionDisplayBuilder

License requirements: None.

SETUP - Static variable in class nxopen.cam.CAMSession.ObjectSubtype

Setup

setup() - Method in interface nxopen.cam.InspectionCreatePathsBuilder

Returns the setup
License requirements: None.

setup() - Method in interface nxopen.sim.KinematicChain

Returns the setup component of the kinematic chain
License requirements: None.

setup() - Method in interface nxopen.UFSession

SETUP_ABS - Static variable in class nxopen.cam.InspectionAnalyzeOutputBuilder.ReportingCsysType

Setup Absolute

SETUP_ELEMENT - Static variable in class nxopen.sim.KinematicComponentBuilder.SystemClass

Any setup element

SETUP_ZAXIS - Static variable in class nxopen.cam.InspectionUVGridBuilder.SphereAxisType

Z-axis stored in Setup

setUparameter1(double) - Method in interface nxopen.weld.FilletBuilder

Deprecated.

Deprecated in NX10.0.0. Removed with no replacement.

setUparameter1(double) - Method in interface nxopen.weld.WeldGrooveBuilder

License requirements: ugweld ("UG WELD")
.

setUparameter2(double) - Method in interface nxopen.weld.FilletBuilder

Deprecated.

Deprecated in NX10.0.0. Removed with no replacement.

setUparameter2(double) - Method in interface nxopen.weld.WeldGrooveBuilder

License requirements: ugweld ("UG WELD")
.

setUpArea(SeatBeltAnchorageBuilder.UpperAreaType) - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setUPatches(int) - Method in interface nxopen.features.RapidSurfaceBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setUPatches(int) - Method in interface nxopen.geometricutilities.DegreesAndSegmentsOrPatchesBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setupBlocksParent() - Method in interface nxopen.die.RotorBuilder

Returns the setup blocks parent builder of the rotor.

setupBodyColorData(DisplayableObject[]) - Method in interface nxopen.facet.PaintFacetBodyBuilder

Setup color data.

setupColorData(FacetedBody[]) - Method in interface nxopen.facet.PaintFacetBodyBuilder

Deprecated.

Deprecated in NX11.0.0. Use PaintFacetBodyBuilder.setupBodyColorData(nxopen.DisplayableObject[]) instead.

setUpdateAllLevels(boolean) - Method in interface nxopen.assemblies.UpdateStructureBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setUpdateControl(Validation.UpdateTime) - Method in interface nxopen.Validation

Define the update behavior of the validation object
License requirements: None.

setUpdateCoordinateSystem(boolean) - Method in interface nxopen.weld.ConnectionFinderBuilder

License requirements: ugweld ("UG WELD")
.

setUpdateDelayed(boolean) - Method in interface nxopen.preferences.SessionModeling

Sets the update delayed option.

setUpdateDesignElementPositionOnLoad(boolean) - Method in interface nxopen.preferences.SessionAssemblies

License requirements: nx_4gd_integration ("4th Generation Design")
.

setUpdateDisp(boolean) - Method in interface nxopen.optimization.DesignStudyBuilder

License requirements: None.

setUpdateDisp(boolean) - Method in interface nxopen.optimization.OptimizationBuilder

License requirements: None.

setUpdateEntityOnResultChange(boolean) - Method in interface nxopen.cae.PostAnnotationBuilder

Set weather entity is to be updated in case of result update for min/max annotation
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setUpdateFailOption(UFModl.UpdateOption) - Method in interface nxopen.uf.UFModeling

Refer to UF_MODL_set_update_fail_option for documentation.

setUpdateFailureAction(TaggedObject, Update.FailureOption) - Method in interface nxopen.Update

Action to take when an object fails to update.

setUpdateFailureReportPreference(boolean) - Method in interface nxopen.preferences.SessionModeling

Sets the option "Update Failure Report" gives choice, whether the user wants the update failure report to be generated for the features that failed during current update cycle.

setUpdateFrameRate(int) - Method in interface nxopen.preferences.SessionMeasureRequirements

License requirements: None.

setUpdateHiddenEdge(boolean) - Method in interface nxopen.preferences.PartVisualizationVisual

Sets the update hidden edges flag for working part.

setUpdateIpw(boolean) - Method in interface nxopen.cam.TurningOperationBuilder

License requirements: cam_base ("CAM BASE")
.

setUpdateLayoutState(boolean) - Method in interface nxopen.cae.LayoutStateApplicator

Sets the update layout state flag.

setUpdateLock() - Method in interface nxopen.tooling.MWPartingManagerBuilder

Set the update lock.

setUpdateLock(boolean) - Method in interface nxopen.Update

Lock and unlock updates.

setUpdateOnSave(MassPropertiesBuilder.UpdateOptions) - Method in interface nxopen.MassPropertiesBuilder

License requirements: None.

setUpdateOption(boolean) - Method in interface nxopen.features.MidSurfaceByFacePairsBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setUpdateOption(SmartObject.UpdateOption) - Method in interface nxopen.geometricutilities.ModlMotion

Set the update option for defining the update behavior for the object.

setUpdateOption(SmartObject.UpdateOption) - Method in interface nxopen.IPlane

Set to plane update
License requirements: None.

setUpdateOptions(ConcurrentDesignManagementBuilder.UpdateTypes) - Method in interface nxopen.tooling.ConcurrentDesignManagementBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setUpdateOverlayingAxisLimitsAutomatically(boolean) - Method in interface nxopen.cae.xyplot.Preference

License requirements: nx_ftk ("NX Advanced Graphing")
.

setUpdatePending(boolean) - Method in interface nxopen.preferences.SessionModeling

Sets the update pending option.

setUpdatePressInformation(boolean) - Method in interface nxopen.tooling.DieEngLineupBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setUpdateScope(Sketch.UpdateLevel) - Method in interface nxopen.Sketch

Sets the current update scope.

setUpdateSketchAtCommit(boolean) - Method in interface nxopen.SketchConstraintBuilder

License requirements: None.

setUpdateSketchOnly(boolean) - Method in interface nxopen.preferences.SessionSketch

Sets the update sketch only preference.

setUpdateStructureOnExpand(boolean) - Method in interface nxopen.preferences.SessionAssemblies

Sets the update structure on assembly tree expand option
License requirements: None.

setUpdateViewWithoutLwData(PartDrafting.UpdateViewWithoutLwDataOption) - Method in interface nxopen.preferences.PartDrafting

Sets the option specifying the action when missing, incomplete or invalid lightweight bodies are found during view create or update
License requirements: None.

setupFacePairInContext(Feature) - Method in interface nxopen.features.MidSurfaceByFacePairsBuilder

Set face pair to edit
License requirements: solid_modeling ("SOLIDS MODELING")
.

setupPaintFacetBody() - Method in interface nxopen.facet.PaintBrushBuilder

Setup the paint facet body
License requirements: None.

setUpperBase(Plane) - Method in interface nxopen.die.TrimFlangeDieAssistantBuilder

License requirements: ug_die_design ("Die Design")
.

setUpperBound(double) - Method in interface nxopen.cae.ModelUpdateDesignVariable

Sets upper bound
License requirements: nx_correl_update ("FE Model Update")
.

setUpperBound(double) - Method in interface nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder

License requirements: nx_correl_update ("FE Model Update")
.

setUpperBound(String) - Method in interface nxopen.visualreporting.GroupLabel

License requirements: nx_visual_reporting ("Visual Reporting")
.

setUpperBoundFreq(double) - Method in interface nxopen.cae.LaminateRandomEventBuilder

Deprecated.

Deprecated in NX10.0.0. Use LaminateDynamicEventBuilder.setUpperBoundFrequency(double) instead.

setUpperBoundFrequency(double) - Method in interface nxopen.cae.LaminateDynamicEventBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setUpperBoundMultiplier(double) - Method in interface nxopen.cae.ModelUpdateOptionsBuilder

License requirements: nx_correl_update ("FE Model Update")
.

setUpperBoundOfGroupLabel(GroupLabel, String) - Method in interface nxopen.visualreporting.VisualReportBuilder

Sets the GroupLabel.upperBound() of the given GroupLabel .

setUpperDeckRelief(double) - Method in interface nxopen.tooling.DieDesignLowerBinderBuilder

License requirements: ug_die_design ("Die Design")
.

setUpperDeckThickness(double) - Method in interface nxopen.tooling.DieDesignLowerBinderBuilder

License requirements: ug_die_design ("Die Design")
.

setUpperDMS(String) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setUpperLegZonesOutputLayer(int) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setUpperLimit(double) - Method in interface nxopen.cae.optimization.DAODesignVariableBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setUpperLimit(double) - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder

License requirements: cam_base ("CAM BASE")
.

setUpperLimit(double) - Method in interface nxopen.motion.JointDefine

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using Motion.JointDefine#upperLimitExpression or Motion.JointDefine#upperLimitAngleExpression to query or edit it.

setUpperLimit(double) - Method in interface nxopen.sim.KinematicAxisBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setUpperLimitDefined(boolean) - Method in interface nxopen.motion.JointDefine

Sets the option of defining upper limit for joint
License requirements: mechanisms ("MECHANISMS")
.

setUpperLimitEnabled(boolean) - Method in interface nxopen.positioning.Constraint

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setUpperLimitRightHandSide(String) - Method in interface nxopen.positioning.Constraint

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setUpperLimitType(TurnRoughFinishLocalReturnBuilder.LimitTypes) - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder

Set the upper limits mode
License requirements: cam_base ("CAM BASE")
.

setUpperLimitType(FillAreaBuilder.UpperLimitTypes) - Method in interface nxopen.die.FillAreaBuilder

License requirements: ug_die_design ("Die Design")
.

setUpperMetricToleranceValue(double) - Method in interface nxopen.annotations.Dimension

Sets a setting to control the metric upper tolerance value of a dimension.

setUpperPlane(double) - Method in interface nxopen.cam.WedmBasedGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setUpperPlane(Plane) - Method in interface nxopen.features.shipdesign.ExpansionDrawingBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setUpperPlane(boolean) - Method in interface nxopen.features.vehicledesign.VisionPlaneBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setUpperRadius(String) - Method in interface nxopen.die.ThroatChildBuilder

License requirements: ug_die_design ("Die Design")
.

setUpperRoofFeature(HeadImpactUpperRoof) - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setUpperSoftLimit(double) - Method in interface nxopen.sim.KinematicAxisBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setUpperSource(InspectionToleranceOperationBuilder.ToleranceSource) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setUpperText(String) - Method in interface nxopen.annotations.ArbitraryTargetData

Sets the upper text.

setUpperText(String) - Method in interface nxopen.annotations.IArbitraryTarget

Sets the target upper text.

setUpperText(String) - Method in interface nxopen.annotations.IdSymbolBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setUpperTextText(String) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder

License requirements: None.

setUpperTextType(SearchModelViewBuilder.TextComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder

License requirements: None.

setUpperTolerance(double) - Method in interface nxopen.cam.ProbeToleranceParametersBuilder

License requirements: None.

setUpperToleranceDegrees(Value) - Method in interface nxopen.annotations.AngularTolerance

Sets the upper tolerance in degrees
License requirements: None.

setUpperToleranceDegrees(double) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setUpperToleranceEnglish(double) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setUpperToleranceInches(Value) - Method in interface nxopen.annotations.LinearTolerance

Sets the upper tolerance in inches
License requirements: None.

setUpperToleranceMetric(double) - Method in interface nxopen.annotations.DimensionStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setUpperToleranceMm(Value) - Method in interface nxopen.annotations.LinearTolerance

Sets the upper tolerance in millimeters(MM)
License requirements: None.

setUpperToleranceType(SearchModelViewBuilder.ValueComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder

License requirements: None.

setUpperToleranceType(SearchModelViewBuilder.ValueComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder

License requirements: None.

setUpperToleranceValue(double) - Method in interface nxopen.annotations.Dimension

Sets a setting to control the upper tolerance value of a dimension.

setUpperToleranceValue(double) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder

License requirements: None.

setUpperToleranceValue(double) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder

License requirements: None.

setupPoleEditing() - Method in interface nxopen.features.MatchEdgeBuilder

Sets up surface pole editing.

setupRegionsInfo() - Method in interface nxopen.tooling.MWDefineRegionsBuilder

Setup the UI data for defining regions
License requirements: None.

setUpToleranceForLength(double) - Method in interface nxopen.tooling.DieDesPierceInsertBuilder

License requirements: ug_die_design ("Die Design")
.

setUpToleranceForWidth(double) - Method in interface nxopen.tooling.DieDesPierceInsertBuilder

License requirements: ug_die_design ("Die Design")
.

setUpVector(Direction) - Method in interface nxopen.display.DecalBuilder

License requirements: None.

setUpVector(Direction) - Method in interface nxopen.display.IrayPlusSimpleMaterialEditorBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setUpVectorValue(Vector3d) - Method in interface nxopen.display.DecalBuilder

License requirements: None.

setUrl(String) - Method in interface nxopen.annotations.TableCellStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setUrl(String) - Method in interface nxopen.annotations.UrlBusinessModifierBuilder

License requirements: geometric_tol ("GDT")
.

setUrlValue(String) - Method in interface nxopen.annotations.PmiAttributeValueUrlBuilder

License requirements: None.

setUrlValue(String) - Method in interface nxopen.annotations.PmiUrlNoteBuilder

License requirements: None.

setUScale(double) - Method in interface nxopen.display.IrayPlusSimpleMaterialEditorBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setUse(int) - Method in interface nxopen.WidthDefinition

License requirements: None.

setUseAcceleration(boolean) - Method in interface nxopen.mechatronics.PositionControlBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setUseAcceleration(boolean) - Method in interface nxopen.mechatronics.SpeedControlBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setUseAdditionalParameters(boolean) - Method in interface nxopen.cae.optimization.TBSSmoothBuilder

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setUseAngle(int) - Method in interface nxopen.die.FlangeSteelRibChildBuilder

Sets the use angle toggle of the Flange Steel Ribs
License requirements: ug_die_design ("Die Design")
.

setUseAngle(int) - Method in interface nxopen.die.FlangeSteelRibParentBuilder

Sets the use angle toggle of the Flange Steel Ribs
License requirements: ug_die_design ("Die Design")
.

setUseApproxSheetBody(boolean) - Method in interface nxopen.tooling.DieDesignTrimPostBuilder

License requirements: ug_die_design ("Die Design")
.

setUseAssemblyCrosshatch(boolean) - Method in interface nxopen.drawings.ViewSettingsBuilder

License requirements: convert_to_pmi (" Convert To PMI"), drafting ("DRAFTING")
.

setUseAutomatic(boolean) - Method in interface nxopen.cae.xyplot.CustomTextStyleSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setUseBaseline(boolean) - Method in interface nxopen.annotations.BaseLinearDimensionBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING")
.

setUseBendRatio(boolean) - Method in interface nxopen.routing.BendCorner

Deprecated.

Deprecated in NX8.5.0. Use Routing.BendCorner#setBendMethod instead.

setUseBendRatio(boolean) - Method in interface nxopen.routing.OffsetPath

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setUseBlankTemplate(boolean) - Method in interface nxopen.FileNew

License requirements: None.

setUseBottomPlateClearance(boolean) - Method in interface nxopen.tooling.BendInsertDesignBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setUseBottomPlateClearance(boolean) - Method in interface nxopen.tooling.FormingInsertBuilder

License requirements: None.

setUseBottomPlateClearance(boolean) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder

License requirements: None.

setUseCallbackValues(boolean) - Method in interface nxopen.weld.JointItemBuilder

License requirements: structure_weld ("STRUCTURE WELD")
.

setUseCamera(boolean) - Method in interface nxopen.features.vehicledesign.CloseRangeCameraListItemBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setUseCameraDirectionPlaneOption(CgfxMattexBuilder.UseCameraDirectionPlane) - Method in interface nxopen.display.CgfxMattexBuilder

Deprecated.

Deprecated in NX10.0.0. No alternative provided for this class.

setUseCenterPoint(boolean) - Method in interface nxopen.features.BlendCornerBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setUseCleanupPass(boolean) - Method in interface nxopen.cam.VolumeBased25DMillingOperationBuilder

License requirements: None.

setUseClearance(boolean) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder

License requirements: None.

setUseConstraintsAll(boolean) - Method in interface nxopen.features.RefitFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setUseContextAssembly(boolean) - Method in interface nxopen.drawings.ConvertDraftingContentsBuilder

License requirements: convert_to_pmi (" Convert To PMI"), drafting ("DRAFTING")
.

setUseControlData(boolean) - Method in interface nxopen.tooling.UserDefinedMotionBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setUseCoverOffset(boolean) - Method in interface nxopen.linedesigner.CoverFeatureBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setUseCoverOffset(boolean) - Method in interface nxopen.linedesigner.HoleFeatureBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setUseCurveFinder(boolean) - Method in interface nxopen.features.CurveFinderBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setUseCustomShapeSize(boolean) - Method in interface nxopen.shapesearch.ShapeSearchBuilder

License requirements: shape_search ("Shape Search")
.

setUseCutColor(boolean) - Method in interface nxopen.features.MasterCutBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setUseCutHatch(boolean) - Method in interface nxopen.features.MasterCutBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setUseCyclicSymmetryCsys(boolean) - Method in interface nxopen.cae.BaseFemPart

Sets the use cyclic symmetry csys flag
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setUseCylindricalCsys(boolean) - Method in interface nxopen.cae.optimization.TBSShapeLinkCondition

License requirements: cae_opt_toposhape ("NX Shape Optimization")
.

setUsedArrangement(Arrangement) - Method in interface nxopen.assemblies.Component

Changes the Arrangement used for this component.

setUsedArrangement(Tag, Tag) - Method in interface nxopen.uf.UFAssem

Refer to UF_ASSEM_set_used_arrangement for documentation.

setUseDefaultKeepSide(boolean) - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder

License requirements: None.

setUseDefinedText(String[]) - Method in interface nxopen.cae.xyplot.CustomTextStyleSetting

Sets the text content defined by user.

setUseDefiningPoints(boolean) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setUseDegMin(InspectionToleranceOperationBuilder.AngleFormat) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setUseDiePlateClearance(boolean) - Method in interface nxopen.tooling.BendInsertDesignBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setUseDiePlateClearance(boolean) - Method in interface nxopen.tooling.FormingInsertBuilder

License requirements: None.

setUseDifferentSubIndexForSameDiameterHoles(boolean) - Method in interface nxopen.tooling.HoleManufacturingNoteBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setUseDraftedBodyAsPartingObject(boolean) - Method in interface nxopen.features.DraftBodyBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setUseDrawingSheetColors(boolean) - Method in interface nxopen.PlotColorsWidthsBuilder

License requirements: None.

setUseDrawingSheetWidths(boolean) - Method in interface nxopen.PlotColorsWidthsBuilder

License requirements: None.

setUsedUnit(int) - Method in interface nxopen.sim.MachineToolConfiguration

Sets the used unit
License requirements: None.

setUseEffectDist(boolean) - Method in interface nxopen.cam.NcmPlanarEngRetBuilder

License requirements: cam_base ("CAM BASE")
.

setUseEffectDist(boolean) - Method in interface nxopen.cam.NcmScEngRetBuilder

License requirements: cam_base ("CAM BASE")
.

setUseEffectiveBiaxialityRatio(boolean) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setUseElements(DurabilityEventOverridesBuilder.UseElementsEnum) - Method in interface nxopen.cae.DurabilityEventOverridesBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setUseElementSpecificValue(boolean) - Method in interface nxopen.cae.modelcheck.ElementQualitySetting

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setUseEntryAvoidance(boolean) - Method in interface nxopen.cam.InspectionPathBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setUseEnvironment(boolean) - Method in interface nxopen.display.EnvironmentBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setUseEvents(DurabilityResultsReportBuilder.UseEventsEnum) - Method in interface nxopen.cae.DurabilityResultsReportBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setUseExactPositioning(boolean) - Method in interface nxopen.cam.VolumeBased25DMillingOperationBuilder

License requirements: None.

setUseExistingCuttingSideFace(boolean) - Method in interface nxopen.features.shipdesign.MarkingLineDesignBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setUseExistingSheetBody(boolean) - Method in interface nxopen.tooling.SpecialFormingBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setUseExitAvoidance(boolean) - Method in interface nxopen.cam.InspectionPathBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setUseExportSessionWidths(boolean) - Method in interface nxopen.CGMImporter

Sets
License requirements: None.

setUseEyeFrom(MirrorCertificationBuilder.EyeFromOptionType) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setUseFaceBrowse(boolean) - Method in interface nxopen.features.FaceRecognitionBuilder

License requirements: gateway ("UG GATEWAY")
.

setUseFaceCapBlend(boolean) - Method in interface nxopen.geometricutilities.FacePlaneSelectionBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setUseFaceCenterAsLocation(boolean) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder

License requirements: None.

setUseFeatureCollisionAvoidance(boolean) - Method in interface nxopen.cam.InspectionUVGridBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setUseFeatureNameAsType(boolean) - Method in interface nxopen.cam.FeatureRecognitionBuilder

License requirements: None.

setUseFeetInchesAndFraction(boolean) - Method in interface nxopen.drafting.AutomationRuleBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setUseFillin(boolean) - Method in interface nxopen.weld.WeldGrooveBuilder

License requirements: ugweld ("UG WELD")
.

setUseFrequencyFiltering(boolean) - Method in interface nxopen.motion.FlexBodyBuilder

License requirements: mechanisms ("MECHANISMS")
.

setUseFrontHeadRests(boolean) - Method in interface nxopen.features.vehicledesign.AllAroundVisionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setUseGeneralSurface(boolean) - Method in interface nxopen.features.vehicledesign.GroundClearanceBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setUseGlobal(boolean) - Method in interface nxopen.features.sheetmetal.CleanUpUtilityBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setUseGlobal(boolean) - Method in interface nxopen.features.sheetmetal.CornerTreatmentBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setUseGlobal(boolean) - Method in interface nxopen.features.sheetmetal.ResizeNeutralFactorBuilder

Sets the Use Global Neutral Factor toggle.

setUseGlobalBendRadius(boolean) - Method in interface nxopen.features.sheetmetal.BendOptions

Sets the Use Global Bend Radius toggle.

setUseGlobalFontSetting(boolean) - Method in interface nxopen.cae.xyplot.TextStyleSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setUseGlobalNeutralFactor(boolean) - Method in interface nxopen.features.sheetmetal.BendOptions

Sets the Use Global Neutral Factor toggle.

setUseGlobalReliefDepth(boolean) - Method in interface nxopen.features.sheetmetal.BendOptions

Sets the Use Global Relief Depth toggle.

setUseGlobalReliefWidth(boolean) - Method in interface nxopen.features.sheetmetal.BendOptions

Sets the Use Global Relief Width toggle.

setUseGlobalThickness(boolean) - Method in interface nxopen.features.sheetmetal.SheetMetalFromSolidBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setUseHighestQuality(boolean) - Method in interface nxopen.cae.optimization.TBSMeshSmooth

License requirements: cae_opt_toposhape ("NX Shape Optimization")
.

setUseHighlight(boolean) - Method in interface nxopen.cae.DurabilityResultsReportBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setUseHoleDiameter(boolean) - Method in interface nxopen.features.DeleteFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setUseIbl(boolean) - Method in interface nxopen.ModelingViewHighQualityImage

Sets the setting for whether the High Quality Image is to use IBL
License requirements: None.

setUseImageBasedLighting(boolean) - Method in interface nxopen.display.ImageBasedLighting

License requirements: None.

setUseInferredReferencePoint(boolean) - Method in interface nxopen.features.MirrorBuilder

Deprecated.

Deprecated in NX9.0.0. Use GeometricUtilities.PatternReferencePointServiceBuilder#setIsReferencePointInferred instead.

setUseInferredReferencePoint(boolean) - Method in interface nxopen.features.PatternFeatureBuilder

Deprecated.

Deprecated in NX9.0.0. Use GeometricUtilities.PatternReferencePointServiceBuilder#setIsReferencePointInferred instead.

setUseInstance(boolean) - Method in interface nxopen.tooling.EWDraftingBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setUseItemTypeFromPartFile(boolean) - Method in interface nxopen.pdm.PartOperationImportBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setUseLightsForShadowCatcherInHqi(boolean) - Method in interface nxopen.display.ImageBasedLighting

License requirements: None.

setUseLightsForShadowCatcherInLwrt(boolean) - Method in interface nxopen.display.EnvironmentBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setUseLightsForShadowCatcherInLwrt(boolean) - Method in interface nxopen.display.ImageBasedLighting

License requirements: None.

setUseLightweightRepresentations(boolean) - Method in interface nxopen.LoadOptions

Sets the option that controls if components are displayed with a lightweight or exact representation.

setUseLimits(boolean) - Method in interface nxopen.features.shipdesign.PlateChamferBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setUseLimitsListFlag(boolean) - Method in interface nxopen.features.FaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setUseLineAntialiasing(boolean) - Method in interface nxopen.drawings.ViewWorkflowBuilder

License requirements: drafting ("DRAFTING")
.

setUseLineLength(boolean) - Method in interface nxopen.drawings.ViewSectionLineBuilder

License requirements: drafting ("DRAFTING")
.

setUseLoadingSpecifiedByStandard(boolean) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setUseLwrtEnvironment(boolean) - Method in interface nxopen.display.EnvironmentBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setUseLwrtImageBasedLighting(boolean) - Method in interface nxopen.display.ImageBasedLighting

License requirements: None.

setUseMachineCycle(boolean) - Method in interface nxopen.cam.TurningOperationBuilder

License requirements: cam_base ("CAM BASE")
.

setUseMarginal(boolean) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setUseMaterialTable(boolean) - Method in interface nxopen.features.sheetmetal.JoggleBuilder

License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

setUseMaxLength(boolean) - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord

Deprecated.

Deprecated in NX8.5.0. Use CurveAnalysisDisplay .

setUseMaxWidth(boolean) - Method in interface nxopen.cam.NcmPlanarEngRetBuilder

License requirements: cam_base ("CAM BASE")
.

setUseMidNodes(boolean) - Method in interface nxopen.cae.RemoveRibsBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setUseMinimumCheckingValue(boolean) - Method in interface nxopen.routing.SplinePathBuilder

License requirements: routing_base ("Routing Basic")
.

setUseMirror(boolean) - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setUseMiter(boolean) - Method in interface nxopen.features.sheetmetal.HemFlangeBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setUseModelDepth(boolean) - Method in interface nxopen.cam.HoleDrilling

License requirements: cam_base ("CAM BASE")
.

setUseNearestPointOnSection(boolean) - Method in interface nxopen.features.BridgeCurveBuilderEx

License requirements: features_modeling ("FEATURES MODELING")
.

setUseNonLinear(boolean) - Method in interface nxopen.cae.DurabilityEventOverridesBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setUseNormalCutoutMethod(boolean) - Method in interface nxopen.features.sheetmetal.MiterOptions

Sets the cut type of the sheet.

setUseNotchFactor(boolean) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setUseOffset(boolean) - Method in interface nxopen.drawings.SectionLineStyleBuilder

Deprecated.

Deprecated in NX10.0.0. Use ViewSectionLineBuilder.setUseOffset(boolean) instead.

setUseOffset(boolean) - Method in interface nxopen.drawings.ViewSectionLineBuilder

License requirements: drafting ("DRAFTING")
.

setUseOnePickPositionMethod(boolean) - Method in interface nxopen.tooling.ReusableObjectPasteBuilder

License requirements: None.

setUseOnePickPositionMethod(boolean) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder

License requirements: None.

setUsePart(DmBndBuilder.UsePartTypes) - Method in interface nxopen.cam.DmBndBuilder

License requirements: None.

setUsePartCollisionAvoidance(boolean) - Method in interface nxopen.cam.InspectionUVGridBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setUsePartDirectoryAsDefaultExportLocation(boolean) - Method in interface nxopen.report.ReportPreference

License requirements: None.

setUsePartialLoading(boolean) - Method in interface nxopen.LoadOptions

Sets the option that controls the partial loading of components.

setUsePartNormal(boolean) - Method in interface nxopen.cam.DPMItpBuilder

License requirements: cam_base ("CAM BASE")
.

setUsePercent(boolean) - Method in interface nxopen.die.HeelpostBuilder

License requirements: ug_die_design ("Die Design")
.

setUsePitchOption(AngularPatternSpacing.UsePitchOptions) - Method in interface nxopen.geometricutilities.AngularPatternSpacing

License requirements: None.

setUsePlaneCapBlend(boolean) - Method in interface nxopen.geometricutilities.FacePlaneSelectionBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setUsePlaneOffset(boolean) - Method in interface nxopen.tooling.DieEngTrimTaskBuilder

Sets the match cut dimension use plane offset value.

setUsePlateClearanceEighth(boolean) - Method in interface nxopen.tooling.ClearanceManagementBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setUsePlateClearanceFifth(boolean) - Method in interface nxopen.tooling.ClearanceManagementBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setUsePlateClearanceFirst(boolean) - Method in interface nxopen.tooling.BurringInsertBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setUsePlateClearanceFirst(boolean) - Method in interface nxopen.tooling.ClearanceManagementBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setUsePlateClearanceFirst(boolean) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setUsePlateClearanceFourth(boolean) - Method in interface nxopen.tooling.ClearanceManagementBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setUsePlateClearanceFourth(boolean) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setUsePlateClearanceNinth(boolean) - Method in interface nxopen.tooling.ClearanceManagementBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setUsePlateClearanceSecond(boolean) - Method in interface nxopen.tooling.BurringInsertBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setUsePlateClearanceSecond(boolean) - Method in interface nxopen.tooling.ClearanceManagementBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setUsePlateClearanceSecond(boolean) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setUsePlateClearanceSeventh(boolean) - Method in interface nxopen.tooling.ClearanceManagementBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setUsePlateClearanceSixth(boolean) - Method in interface nxopen.tooling.ClearanceManagementBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setUsePlateClearanceTenth(boolean) - Method in interface nxopen.tooling.ClearanceManagementBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setUsePlateClearanceThird(boolean) - Method in interface nxopen.tooling.BurringInsertBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setUsePlateClearanceThird(boolean) - Method in interface nxopen.tooling.ClearanceManagementBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setUsePlateClearanceThird(boolean) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setUsePlateThicknessCorrection(boolean) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setUsePortRotateFlag(boolean) - Method in interface nxopen.positioning.ConstraintReference

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setUsePreferredPortFlag(RoutingPart.UsePreferredPort) - Method in interface nxopen.preferences.RoutingPart

Sets whether or not to use the preffered placement port during calcluation of placement solutions during place part.

setUsePrevious2dIpw(boolean) - Method in interface nxopen.cam.MillCutParameters

License requirements: cam_base ("CAM BASE")
.

setUseProjectedCurve(boolean) - Method in interface nxopen.geometricanalysis.sectionanalysis.CurveAlignedBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setUsePunchPlateClearance(boolean) - Method in interface nxopen.tooling.BendInsertDesignBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setUsePunchPlateClearance(boolean) - Method in interface nxopen.tooling.FormingInsertBuilder

License requirements: None.

setUsePunchPlateClearance(boolean) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder

License requirements: None.

setUseQuery(boolean) - Method in interface nxopen.cam.HoleMakingBuilder

License requirements: cam_base ("CAM BASE")
.

setUser(String) - Method in interface nxopen.routing.DesignRuleOverride

Sets the user of the design rule override is returned
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setUseRadialDirectionToggle(boolean) - Method in interface nxopen.geometricutilities.CircularPattern

License requirements: None.

setUseRadialDirectionToggle(boolean) - Method in interface nxopen.geometricutilities.PolygonPattern

License requirements: None.

setUserAttribute(NXObject.AttributeInformation, Update.Option) - Method in interface nxopen.NXObject

Creates or modifies an attribute with the option to update or not.

setUserAttribute(String, int, int, Update.Option) - Method in interface nxopen.NXObject

Creates or modifies an integer attribute with the option to update or not.

setUserAttribute(String, int, double, Update.Option) - Method in interface nxopen.NXObject

Creates or modifies a real attribute with the option to update or not.

setUserAttribute(String, int, String, Update.Option) - Method in interface nxopen.NXObject

Creates or modifies a string attribute with the option to update or not.

setUserAttribute(String, int, Update.Option) - Method in interface nxopen.NXObject

Creates or modifies a null attribute with the option to update or not.

setUserAttributeLock(String, NXObject.AttributeType, boolean) - Method in interface nxopen.NXObject

Lock or unlock the given attribute.

setUserBasePoint(Point) - Method in interface nxopen.display.ImageBaseBuilder

License requirements: None.

setUserClassDir(String[], int) - Method in interface nxopen.uf.UFKf

Refer to UF_KF_set_user_class_dir for documentation.

setUserClassName(String) - Method in interface nxopen.Validation

Set user class name
License requirements: None.

setUserComment(String, String) - Method in interface nxopen.options.ChangeList

Sets the user comment.

setUserComment(String, String) - Method in interface nxopen.options.DraftingStandardChangeList

Sets the user comment.

setUserComments(String) - Method in interface nxopen.assemblies.productinterface.InterfaceObject

Sets the user comments on the input product interface object
License requirements: None.

setUserComments(InterfaceObject, String) - Method in interface nxopen.assemblies.productinterface.ObjectBuilder

Sets the user comments on the product interface item passed in
License requirements: None.

setUserCoordinateSystem(CoordinateSystem) - Method in interface nxopen.weld.WeldPmiBuilder

License requirements: ugweld ("UG WELD") OR structure_weld ("STRUCTURE WELD")
.

setUserCsys(CoordinateSystem) - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setUserCsys(CoordinateSystem) - Method in interface nxopen.weld.WeldLabelBuilder

License requirements: ugweld ("UG WELD") OR structure_weld ("STRUCTURE WELD")
.

setUserData(double) - Method in interface nxopen.cae.PostGraphBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setUserData(UFVariant, UFVariant) - Method in interface nxopen.uf.UFDrpos

Refer to UF_DRPOS_set_user_data for documentation.

setUserDataSize(UFVariant, int) - Method in interface nxopen.uf.UFDpud

Refer to UF_DPUD_set_user_data_size for documentation.

setUserDefinedClass(UserDefinedClass) - Method in interface nxopen.features.UserDefinedObjectFeatureBuilder

License requirements: None.

setUserDefinedClass(UserDefinedClass) - Method in interface nxopen.userdefinedobjects.UserDefinedObject

License requirements: None.

setUserDefinedDieInsertClearance(double) - Method in interface nxopen.tooling.DieInsertBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setUserDefinedDieInsertClearance(double) - Method in interface nxopen.tooling.PiercingInsertBuilder

License requirements: None.

setUserDefinedDirection(Direction) - Method in interface nxopen.cae.responsesimulation.NodalFunctionEvaluationSettingBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setUserDefinedDirection(Direction) - Method in interface nxopen.cae.responsesimulation.RmsResultsEvaluationSettingBuilder

Deprecated.

Deprecated in NX8.5.0. This method is not used any more and there is no replacement for it.

setUserDefinedDirection(Direction) - Method in interface nxopen.cae.responsesimulation.TranslationalNodalFunctionExcitationBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setUserDefinedDirection(Direction) - Method in interface nxopen.cae.responsesimulation.VelocityImpactDirection

License requirements: nx_response_anlys ("NX Response Analysis")
.

setUserDefinedInterLaminarFailureTheory(String) - Method in interface nxopen.cae.Laminate

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setUserDefinedInterLaminarFailureTheory(String) - Method in interface nxopen.cae.LaminatePly

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setUserDefinedObject(UserDefinedObject) - Method in interface nxopen.features.UserDefinedObjectFeatureBuilder

License requirements: None.

setUserDefinedPlane(Xform) - Method in interface nxopen.annotations.PlaneBuilder

License requirements: None.

setUserDefinedPlyFailureTheory(String) - Method in interface nxopen.cae.Laminate

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setUserDefinedPlyFailureTheory(String) - Method in interface nxopen.cae.LaminatePly

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setUserDefinedProjDir(Direction) - Method in interface nxopen.geometricutilities.PatternOrientation

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setUserDefinedPunchPenetration(double) - Method in interface nxopen.tooling.PiercingInsertBuilder

License requirements: None.

setUserDefinedPunchPenetration(double) - Method in interface nxopen.tooling.PunchInsertBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setUserDefinedStressRecoveryPoints(Point2d[]) - Method in interface nxopen.cae.IBeamSectionBuilder

Sets the user-defined stress recovery points.

setUserDefinedSymbolAspectRatio(double) - Method in interface nxopen.annotations.AppendedTextBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setUserDefinedSymbolCfw(LineCfw) - Method in interface nxopen.annotations.SymbolPreferences

Sets the user defined symbol color, font, and width
License requirements: None.

setUserDefinedSymbolColor(NXColor) - Method in interface nxopen.annotations.SymbolStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setUserDefinedSymbolFont(DisplayableObject.ObjectFont) - Method in interface nxopen.annotations.SymbolStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setUserDefinedSymbolHeight(double) - Method in interface nxopen.annotations.AppendedTextBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setUserDefinedSymbolLength(double) - Method in interface nxopen.annotations.AppendedTextBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setUserDefinedSymbolScale(double) - Method in interface nxopen.annotations.AppendedTextBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setUserDefinedSymbolWidth(LineWidth) - Method in interface nxopen.annotations.SymbolStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setUserDefinedText(String) - Method in interface nxopen.annotations.OrdinateDimensionPreferences

Sets the user defined text, if the user defined symbol option is used to display the origin
License requirements: None.

setUserDefinedText(String) - Method in interface nxopen.annotations.OrdinateStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setUserDefinedUnitsSystem(Result.ResultBasicUnit) - Method in interface nxopen.cae.ResultsManipulationBuilder

The user-defined units system
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setUserDescription(String) - Method in interface nxopen.cae.connections.IConnectionMod

Use this function to set the connection description.

setUseRearHeadRests(boolean) - Method in interface nxopen.features.vehicledesign.AllAroundVisionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setUseRefset(JtCreator.RefsetOption) - Method in interface nxopen.JtCreator

License requirements: None.

setUseRepairTolerance(boolean) - Method in interface nxopen.preferences.SessionNXGateway

Sets the use repair tolerance flag.

setUserExpressions(String[], String[]) - Method in interface nxopen.tooling.AddReusableFeatureBuilder

Sets the user expressions value
License requirements: None.

setUserFunction(TaggedObject) - Method in interface nxopen.cae.LaminateDynamicEventBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setUseRibMaxArea(boolean) - Method in interface nxopen.cae.RemoveRibsBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setUseRibMaxElem(boolean) - Method in interface nxopen.cae.RemoveRibsBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setUseRibMinBoundaryNodeRatio(boolean) - Method in interface nxopen.cae.RemoveRibsBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setUserInsertionPoint(Point) - Method in interface nxopen.display.ImageBaseBuilder

License requirements: None.

setUserLocked(boolean) - Method in interface nxopen.Expression

License requirements: None.

setUserName(String) - Method in interface nxopen.cae.BaseResultType

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setUsername(String) - Method in interface nxopen.routing.DesignRuleViolationViewer

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setUserName(String) - Method in interface nxopen.tooling.ConcurrentDesignManagementBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setUserNameOfGroupLabel(GroupLabel, String) - Method in interface nxopen.visualreporting.VisualReportBuilder

Sets the INXObject.name() of the given GroupLabel .

setUserPrompt(String) - Method in interface nxopen.cam.InspectionCmmCommandBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setUserPrompt(String) - Method in interface nxopen.visualreporting.Condition

License requirements: nx_visual_reporting ("Visual Reporting")
.

setUserPromptOfCondition(Condition, String) - Method in interface nxopen.visualreporting.VisualReportBuilder

Sets the Condition.userPrompt() of the specified Condition .

setUserReferenceDirection(Direction) - Method in interface nxopen.display.ImageBaseBuilder

License requirements: None.

setUserRemarks(String[]) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder

Sets the user remarks with the feature.

setUserRole(String) - Method in interface nxopen.uf.UFUgmgr

Refer to UF_UGMGR_set_user_role for documentation.

setUserSelectedObjects(boolean) - Method in interface nxopen.geometricutilities.BlendLimitsData

License requirements: solid_modeling ("SOLIDS MODELING")
.

setUserSpecifiedUnit(MechanicalLoadSumBuilder.UserUnit) - Method in interface nxopen.cae.MechanicalLoadSumBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setUserSpecifiedUnit(SolidPropertyCheckBuilder.UserUnit) - Method in interface nxopen.cae.SolidPropertyCheckBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setUserSymbolPreferences(UserSymbolPreferences) - Method in interface nxopen.annotations.DimensionData

Sets the user defined symbol preferences
License requirements: None.

setUserSymbolPreferences(UserSymbolPreferences) - Method in interface nxopen.annotations.SimpleDraftingAid

Sets the user symbol preferences.

setUserSymbolPreferences(UserSymbolPreferences) - Method in interface nxopen.annotations.SimpleDraftingAidPreferences

Sets the user symbol preferences
License requirements: None.

setUserSymbolSize(UserSymbolPreferences.SizeType, double, double) - Method in interface nxopen.annotations.SimpleDraftingAid

Sets the user symbol size.

setUserText(String[]) - Method in interface nxopen.cae.PostAnnotation

Put the user text in each box
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setUsertext(String[]) - Method in interface nxopen.cae.PostAnnotationBuilder

Set the user text
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setUsertoolMenuEntry(int, String, String) - Method in interface nxopen.uf.UFUi

Refer to UF_UI_set_usertool_menu_entry for documentation.

setUsertypename(String) - Method in interface nxopen.cae.ResultVariable

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setUseSameStock(boolean) - Method in interface nxopen.routing.PlatformCreatorBuilder

License requirements: routing_platform ("Routing Platform")
.

setUseSaveAs(boolean) - Method in interface nxopen.features.MasterCutBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setUseScale(boolean) - Method in interface nxopen.mechatronics.AccelerometerBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setUseScale(boolean) - Method in interface nxopen.mechatronics.DistanceSensorBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setUseScale(boolean) - Method in interface nxopen.mechatronics.GenericSensorBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setUseScale(boolean) - Method in interface nxopen.mechatronics.InclinometerBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setUseScale(boolean) - Method in interface nxopen.mechatronics.PositionSensorBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setUseScale(boolean) - Method in interface nxopen.mechatronics.VelocitySensorBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setUseSeedFace(boolean) - Method in interface nxopen.weld.WeldFillBuilder

License requirements: ugweld ("UG WELD")
.

setUseSegmentedBends(boolean) - Method in interface nxopen.features.sheetmetal.LoftedFlangeBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setUseShadowCatcher(boolean) - Method in interface nxopen.display.Shadows

License requirements: None.

setUsesMasterModel(String) - Method in interface nxopen.FileNew

License requirements: None.

setUseSmfeatTog(boolean) - Method in interface nxopen.tooling.InitProjBuilder

License requirements: None.

setUseSolvingTolerance(boolean) - Method in interface nxopen.preferences.SessionSketch

Sets the sketch solving tolerance flag.

setUseSolvingTolerance(boolean) - Method in interface nxopen.preferences.SketchPreferences

Sets the sketch solving tolerance flag.

setUseSourceMeshCollector(boolean) - Method in interface nxopen.cae.ElementModifyTypeBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setUseSpacingToggle(boolean) - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder

License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setUseSpecificDirection(boolean) - Method in interface nxopen.features.PoleSmoothingBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setUseSplinePoint(boolean) - Method in interface nxopen.MeshParameterData

Sets
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

setUseSplineToDefineSurface(boolean) - Method in interface nxopen.cae.optimization.TBSShapeLinkCondition

License requirements: cae_opt_toposhape ("NX Shape Optimization")
.

setUseStabilizerBar(boolean) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setUseStageSizeAndOrientation(boolean) - Method in interface nxopen.display.Background

License requirements: None.

setUseStandardLoading(boolean) - Method in interface nxopen.features.vehicledesign.VisionPlaneBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setUseStandardLoading(boolean) - Method in interface nxopen.features.vehicledesign.WindshieldDatumBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setUseStartSectionFile(boolean) - Method in interface nxopen.IgesCreator

License requirements: None.

setUseStripperPlateClearance(boolean) - Method in interface nxopen.tooling.BendInsertDesignBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setUseStripperPlateClearance(boolean) - Method in interface nxopen.tooling.FormingInsertBuilder

License requirements: None.

setUseStripperPlateClearance(boolean) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder

License requirements: None.

setUseSurfaceApproximation(boolean) - Method in interface nxopen.features.ShellBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setUseSurfaceNormal(boolean) - Method in interface nxopen.features.ConcaveFacesBuilder

License requirements: None.

setUseSymbol(boolean) - Method in interface nxopen.tooling.ChannelFittingBuilder

License requirements: ug_mold_design ("UG MOLD")
.

setUseSymbol(boolean) - Method in interface nxopen.tooling.SpecifyCircuitBuilder

License requirements: ug_mold_design ("UG MOLD")
.

setUseSystemPrecision(boolean) - Method in interface nxopen.preferences.SessionUserInterfaceUI

Sets the use system precision flag.

setUseTangentEdgeAngles(boolean) - Method in interface nxopen.cam.GeometrySet

License requirements: cam_base ("CAM BASE")
.

setUseTangentEdgeAngles(boolean) - Method in interface nxopen.cam.SurfaceRegions

License requirements: cam_base ("CAM BASE")
.

setUseTangentEdgeAngles(boolean) - Method in interface nxopen.features.ExtractFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setUseTaperedShank(boolean) - Method in interface nxopen.cam.MillingToolBuilder

License requirements: cam_base ("CAM BASE")
.

setUseTargetPoint(boolean) - Method in interface nxopen.display.CameraBuilder

License requirements: None.

setUseToolHolder(boolean) - Method in interface nxopen.cam.CutParameters

License requirements: cam_base ("CAM BASE")
.

setUseTransientDamping(boolean) - Method in interface nxopen.motion.FlexBodyBuilder

License requirements: mechanisms ("MECHANISMS")
.

setUseTranslucency(boolean) - Method in interface nxopen.drawings.ViewWorkflowBuilder

License requirements: drafting ("DRAFTING")
.

setUseTriangularMesh(boolean) - Method in interface nxopen.preferences.SessionModeling

Sets the use triangular mesh setting setting.

setUseTrim(boolean) - Method in interface nxopen.mechatronics.AccelerometerBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setUseTrim(boolean) - Method in interface nxopen.mechatronics.GenericSensorBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setUseTrim(boolean) - Method in interface nxopen.mechatronics.InclinometerBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setUseTrim(boolean) - Method in interface nxopen.mechatronics.PositionSensorBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setUseTrim(boolean) - Method in interface nxopen.mechatronics.VelocitySensorBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setUseTwoArrows(boolean) - Method in interface nxopen.annotations.CuttingPlaneSymbolBuilder

License requirements: geometric_tol ("GDT")
.

setUseType(int) - Method in interface nxopen.mechatronics.ProxyObjectBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setUseUnderAxleSurface(boolean) - Method in interface nxopen.features.vehicledesign.GroundClearanceBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setUseUnspecified(boolean) - Method in interface nxopen.cae.BCSelectionDisplayBuilder

License requirements: None.

setUseUserDefinedTp(boolean) - Method in interface nxopen.cam.HoleMakingBuilder

License requirements: cam_base ("CAM BASE")
.

setUseVehiclePackagingData(boolean) - Method in interface nxopen.HumanPosturePredictionBuilder

License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setUseWindshieldEdge(boolean) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setUseWireFrameOnly(boolean) - Method in interface nxopen.features.vehicledesign.AllAroundVisionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setUseWithAdvancedStudioImageBasedLighting(boolean) - Method in interface nxopen.display.LightBuilder

License requirements: None.

setUseWithIbl(boolean) - Method in interface nxopen.display.LightBuilder

Deprecated.

Deprecated in NX10.0.0. This funcationality is no longer supported.

setUseWithRayTracedImageBasedLighting(boolean) - Method in interface nxopen.display.LightBuilder

License requirements: None.

setUseYDirectionToggle(boolean) - Method in interface nxopen.geometricutilities.AlongPathPattern

License requirements: None.

setUseYDirectionToggle(boolean) - Method in interface nxopen.geometricutilities.RectangularPattern

License requirements: None.

setUsingDrapingMeshSize(boolean) - Method in interface nxopen.cae.LaminateDrapingDataBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setUsingPhysicalHysteretic(boolean) - Method in interface nxopen.cae.responsesimulation.PhysicalDampingSettings

License requirements: nx_response_anlys ("NX Response Analysis")
.

setUsingPhysicalHysteretic(boolean) - Method in interface nxopen.motion.FlexPhysicalDampingSettings

License requirements: mechanisms ("MECHANISMS")
.

setUsingPhysicalViscous(boolean) - Method in interface nxopen.cae.responsesimulation.PhysicalDampingSettings

License requirements: nx_response_anlys ("NX Response Analysis")
.

setUsingPhysicalViscous(boolean) - Method in interface nxopen.motion.FlexPhysicalDampingSettings

License requirements: mechanisms ("MECHANISMS")
.

setUsingUserDefinedDirection(NodalFunctionEvalRequest) - Method in interface nxopen.cae.responsesimulation.NodalFunctionEvaluationSettingBuilder

License requirements: nx_response_anlys ("NX Response Analysis")
.

setUsingUserDefinedDirection(boolean) - Method in interface nxopen.cae.responsesimulation.RmsResultsEvaluationSettingBuilder

Deprecated.

Deprecated in NX8.5.0. This method is not used any more and there is no replacement for it.

setUStart(double) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setUStartDeg(double) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setUStartDist(double) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setUStartEndMode(InspectionSurfaceFeatureBuilder.StartEndModeType) - Method in interface nxopen.cam.InspectionSurfaceFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setUStartMode(InspectionMethodBuilder.UVModeTypes) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setUStartSweep(double) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setUtf8Value(String, String) - Method in interface nxopen.options.ChangeList

Sets the value of a Options.OptionType#UTF8STRING option.

setUtf8Value(String, String[]) - Method in interface nxopen.options.ChangeList

Sets the value of a Options.OptionType#UTF8STRING_LIST option.

setUtf8Value(String, String) - Method in interface nxopen.options.DraftingStandardChangeList

Sets the value of a Options.OptionType#UTF8STRING option.

setUtilization(double) - Method in interface nxopen.tooling.BlankNestingBuilder

License requirements: None.

setUVGrid(boolean) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setUvGrid(boolean) - Method in interface nxopen.drawings.GeneralViewStyle

Sets the status of UV grid, if true, grid curves for selected drawing member views are added else the grid curves are removed from the selected member views.

setUVGrid(boolean) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder

License requirements: drafting ("DRAFTING")
.

setUvGrid(boolean) - Method in interface nxopen.preferences.GeneralViewPreferences

Sets the status of UV grid.

setUVOrientation(NSidedSurfaceBuilder.UVOrientationType) - Method in interface nxopen.features.NSidedSurfaceBuilder

License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

setValid(boolean) - Method in interface nxopen.features.shipdesign.PlaneListBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setValidateType(CloseRangeDemoCylinderListItemBuilder.ValidateTypes) - Method in interface nxopen.features.vehicledesign.CloseRangeDemoCylinderListItemBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setValidationAbortImportOnFail(boolean) - Method in interface nxopen.pdm.PartOperationImportBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setValidationAbortOption(boolean) - Method in interface nxopen.uf.UFClone

Refer to UF_CLONE_set_validation_abort_option for documentation.

setValidationMode(PartOperationImportBuilder.Validation) - Method in interface nxopen.pdm.NativePartLogicalObject

Sets the validation mode setting defined for this part
License requirements: assemblies ("ASSEMBLIES MODULE")
.

setValidationMode(PartOperationImportBuilder.Validation) - Method in interface nxopen.pdm.PartOperationImportBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setValidationOptions(String, UFClone.ValidationOpts) - Method in interface nxopen.uf.UFClone

Refer to UF_CLONE_set_validation_options for documentation.

setValidationProperties(boolean) - Method in interface nxopen.Step203Creator

Deprecated.

Deprecated in NX11.0.0. Use StepCreator instead.

setValidationProperties(boolean) - Method in interface nxopen.Step214Creator

Deprecated.

Deprecated in NX11.0.0. Use StepCreator instead.

setValidationProperties(boolean) - Method in interface nxopen.StepCreator

License requirements: None.

setValidationRuleSetBrowseOption(PartOperationImportBuilder.ValidationRuleSetFileBrowseOption) - Method in interface nxopen.pdm.PartOperationImportBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setValidationRuleSetBrowseOption(PartOperationImportBuilder.ValidationRuleSetFileBrowseOption) - Method in interface nxopen.pdm.PartOperationValidationPropertiesBuilder

Sets the validation rule set browse option
License requirements: assemblies ("ASSEMBLIES MODULE")
.

setValidationRuleSetFile(String) - Method in interface nxopen.pdm.PartOperationImportBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setValidationRuleSetFile(String) - Method in interface nxopen.pdm.PartOperationValidationPropertiesBuilder

Sets the validation rule set file
License requirements: assemblies ("ASSEMBLIES MODULE")
.

setValidationRuleSetFileBrowseOption(PartOperationImportBuilder.ValidationRuleSetFileBrowseOption) - Method in interface nxopen.pdm.NativePartLogicalObject

Sets the validation rule set file browse option defined for this part
License requirements: assemblies ("ASSEMBLIES MODULE")
.

setValidationTreatOutdatedAsPass(boolean) - Method in interface nxopen.pdm.PartOperationImportBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setValidationTreatOutdatedAsPass(boolean) - Method in interface nxopen.pdm.PartOperationValidationPropertiesBuilder

Sets the validation treat outdated as pass flag
License requirements: assemblies ("ASSEMBLIES MODULE")
.

setValidationTreatWarningAsPass(boolean) - Method in interface nxopen.pdm.PartOperationImportBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setValidationTreatWarningAsPass(boolean) - Method in interface nxopen.pdm.PartOperationValidationPropertiesBuilder

Sets the validation treat warning as pass flag
License requirements: assemblies ("ASSEMBLIES MODULE")
.

setValidityFlag(boolean) - Method in interface nxopen.features.SectionInertiaAnalysisBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setValidValues(String[]) - Method in interface nxopen.validate.RequirementBuilder

Sets the valid values
License requirements: None.

setValleys(boolean) - Method in interface nxopen.cam.CleanupSettings

License requirements: cam_base ("CAM BASE")
.

setValue(Annotation) - Method in interface nxopen.annotations.SelectAnnotation

Sets the object being selected
License requirements: None.

setValue(Annotation, View, Point3d) - Method in interface nxopen.annotations.SelectAnnotation

The object being selected with the object's view and object's point
License requirements: None.

setValue(Dimension) - Method in interface nxopen.annotations.SelectDimension

Sets the object being selected
License requirements: None.

setValue(Dimension, View, Point3d) - Method in interface nxopen.annotations.SelectDimension

The object being selected with the object's view and object's point
License requirements: None.

setValue(String) - Method in interface nxopen.annotations.SymbolCatalogParameterBuilder

License requirements: nx_layout ("NX Layout")
.

setValue(Component) - Method in interface nxopen.assemblies.SelectComponent

Sets the object being selected
License requirements: None.

setValue(Component, View, Point3d) - Method in interface nxopen.assemblies.SelectComponent

The object being selected with the object's view and object's point
License requirements: None.

setValue(double) - Method in interface nxopen.blockstyler.AngularDimension

License requirements: None.

setValue(double) - Method in interface nxopen.blockstyler.DoubleBlock

License requirements: None.

setValue(double) - Method in interface nxopen.blockstyler.ExpressionBlock

License requirements: None.

setValue(int) - Method in interface nxopen.blockstyler.IntegerBlock

License requirements: None.

setValue(double) - Method in interface nxopen.blockstyler.LinearDimension

License requirements: None.

setValue(String[]) - Method in interface nxopen.blockstyler.MultilineString

Sets the Value
License requirements: None.

setValue(int[]) - Method in interface nxopen.blockstyler.ObjectColorPicker

Sets the Value
License requirements: None.

setValue(double) - Method in interface nxopen.blockstyler.OnPathDimension

License requirements: None.

setValue(double) - Method in interface nxopen.blockstyler.RadiusDimension

License requirements: None.

setValue(int) - Method in interface nxopen.blockstyler.RGBColorPicker

License requirements: None.

setValue(String) - Method in interface nxopen.blockstyler.StringBlock

License requirements: None.

setValue(boolean) - Method in interface nxopen.blockstyler.Toggle

License requirements: None.

setValue(double) - Method in interface nxopen.cae.ModelUpdateDesignVariable

Sets value
License requirements: nx_correl_update ("FE Model Update")
.

setValue(CAEBody) - Method in interface nxopen.cae.SelectCAEBody

Sets the object being selected
License requirements: None.

setValue(CAEBody, View, Point3d) - Method in interface nxopen.cae.SelectCAEBody

The object being selected with the object's view and object's point
License requirements: None.

setValue(CAEEdge) - Method in interface nxopen.cae.SelectCAEEdge

Sets the object being selected
License requirements: None.

setValue(CAEEdge, View, Point3d) - Method in interface nxopen.cae.SelectCAEEdge

The object being selected with the object's view and object's point
License requirements: None.

setValue(CAEFace) - Method in interface nxopen.cae.SelectCAEFace

Sets the object being selected
License requirements: None.

setValue(CAEFace, View, Point3d) - Method in interface nxopen.cae.SelectCAEFace

The object being selected with the object's view and object's point
License requirements: None.

setValue(FENode) - Method in interface nxopen.cae.SelectFENode

Sets the object being selected
License requirements: None.

setValue(FENode, View, Point3d) - Method in interface nxopen.cae.SelectFENode

The object being selected with the object's view and object's point
License requirements: None.

setValue(SimConditionParam, double) - Method in interface nxopen.cae.SimCondition

Sets the condition specified parameter value.

setValue(double) - Method in interface nxopen.cam.BoundaryTurnMemberFineFinishOffset

License requirements: cam_base ("CAM BASE")
.

setValue(double) - Method in interface nxopen.cam.CutAngle

License requirements: cam_base ("CAM BASE")
.

setValue(double) - Method in interface nxopen.cam.ElementDoubleBuilder

License requirements: cam_base ("CAM BASE")
.

setValue(int) - Method in interface nxopen.cam.ElementIntBuilder

License requirements: cam_base ("CAM BASE")
.

setValue(double) - Method in interface nxopen.cam.FinishDwell

License requirements: cam_base ("CAM BASE")
.

setValue(double) - Method in interface nxopen.cam.InferredDouble

License requirements: cam_base ("CAM BASE")
.

setValue(boolean) - Method in interface nxopen.cam.InheritableBoolBuilder

License requirements: cam_base ("CAM BASE")
.

setValue(double) - Method in interface nxopen.cam.InheritableDoubleBuilder

License requirements: cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setValue(double) - Method in interface nxopen.cam.InheritableFeedBuilder

License requirements: cam_base ("CAM BASE")
.

setValue(FeedRapidOutputMode) - Method in interface nxopen.cam.InheritableFeedModeBuilder

License requirements: cam_base ("CAM BASE")
.

setValue(int) - Method in interface nxopen.cam.InheritableIntBuilder

License requirements: cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setValue(String) - Method in interface nxopen.cam.InheritableTextBuilder

License requirements: cam_base ("CAM BASE")
.

setValue(InspectionMethodBuilder.AxisExtrapolationTypes) - Method in interface nxopen.cam.InspectionAxisExtrapolationModeBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setValue(InspectionMethodBuilder.CylinderFittingTypes) - Method in interface nxopen.cam.InspectionCylinderCircleFitModeBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setValue(InspectionMethodBuilder.DatumPlaneFittingTypes) - Method in interface nxopen.cam.InspectionDatumPlaneFittingModeBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setValue(InspectionMethodBuilder.LimitsOfSizeTypes) - Method in interface nxopen.cam.InspectionLimitsOfSizeModeBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setValue(InspectionMoveBuilder.ProbeTipTypes) - Method in interface nxopen.cam.InspectionProbeTipTypeBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setValue(InspectionMethodBuilder.ProfileDispositionTypes) - Method in interface nxopen.cam.InspectionProfileDispositionModeBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setValue(InspectionMethodBuilder.ReferenceFeatureModeTypes) - Method in interface nxopen.cam.InspectionReferenceFeatureModeBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setValue(InspectionMoveBuilder.SensorStrategyTypes) - Method in interface nxopen.cam.InspectionSensorStrategyBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setValue(InspectionMethodBuilder.SurfaceProfileTypes) - Method in interface nxopen.cam.InspectionSurfaceProfileModeBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setValue(boolean) - Method in interface nxopen.cam.OppositeDirection

License requirements: cam_base ("CAM BASE")
.

setValue(CAMFeature) - Method in interface nxopen.cam.SelectCAMFeature

Sets the object being selected
License requirements: None.

setValue(CAMFeature, View, Point3d) - Method in interface nxopen.cam.SelectCAMFeature

The object being selected with the object's view and object's point
License requirements: None.

setValue(String) - Method in interface nxopen.drafting.AttributeItemBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setValue(DraftingView) - Method in interface nxopen.drawings.SelectDraftingView

Sets the object being selected
License requirements: None.

setValue(DraftingView, View, Point3d) - Method in interface nxopen.drawings.SelectDraftingView

The object being selected with the object's view and object's point
License requirements: None.

setValue(DrawingRegion) - Method in interface nxopen.drawings.SelectDrawingRegion

Sets the object being selected
License requirements: None.

setValue(DrawingRegion, View, Point3d) - Method in interface nxopen.drawings.SelectDrawingRegion

The object being selected with the object's view and object's point
License requirements: None.

setValue(DrawingView) - Method in interface nxopen.drawings.SelectDrawingView

Sets the object being selected
License requirements: None.

setValue(DrawingView, View, Point3d) - Method in interface nxopen.drawings.SelectDrawingView

The object being selected with the object's view and object's point
License requirements: None.

setValue(SectionLine) - Method in interface nxopen.drawings.SelectSectionLine

Sets the object being selected
License requirements: None.

setValue(SectionLine, View, Point3d) - Method in interface nxopen.drawings.SelectSectionLine

The object being selected with the object's view and object's point
License requirements: None.

setValue(double) - Method in interface nxopen.Expression

License requirements: None.

setValue(FacetedBody) - Method in interface nxopen.facet.SelectFacetedBody

Sets the object being selected
License requirements: None.

setValue(FacetedBody, View, Point3d) - Method in interface nxopen.facet.SelectFacetedBody

The object being selected with the object's view and object's point
License requirements: None.

setValue(double) - Method in interface nxopen.features.CustomDoubleAttribute

License requirements: solid_modeling ("SOLIDS MODELING")
.

setValue(Expression) - Method in interface nxopen.features.CustomExpressionAttribute

License requirements: solid_modeling ("SOLIDS MODELING")
.

setValue(int) - Method in interface nxopen.features.CustomIntegerAttribute

License requirements: solid_modeling ("SOLIDS MODELING")
.

setValue(boolean) - Method in interface nxopen.features.CustomLogicalAttribute

License requirements: solid_modeling ("SOLIDS MODELING")
.

setValue(String) - Method in interface nxopen.features.CustomStringAttribute

License requirements: solid_modeling ("SOLIDS MODELING")
.

setValue(TaggedObject) - Method in interface nxopen.features.CustomTagAttribute

License requirements: solid_modeling ("SOLIDS MODELING")
.

setValue(Feature) - Method in interface nxopen.features.SelectFeature

Sets the object being selected
License requirements: None.

setValue(Feature, View, Point3d) - Method in interface nxopen.features.SelectFeature

The object being selected with the object's view and object's point
License requirements: None.

setValue(FlatPattern) - Method in interface nxopen.features.SelectFlatPattern

Sets the object being selected
License requirements: None.

setValue(FlatPattern, View, Point3d) - Method in interface nxopen.features.SelectFlatPattern

The object being selected with the object's view and object's point
License requirements: None.

setValue(PartModule) - Method in interface nxopen.features.SelectPartModule

Sets the object being selected
License requirements: None.

setValue(PartModule, View, Point3d) - Method in interface nxopen.features.SelectPartModule

The object being selected with the object's view and object's point
License requirements: None.

setValue(String) - Method in interface nxopen.features.sheetmetal.BreakCornerBuilder

Deprecated.

Deprecated in NX10.0.0. Use Expression.setRightHandSide(java.lang.String) on the Expression object returned from Features.SheetMetal.BreakCornerBuilder#value instead.

setValue(String) - Method in interface nxopen.features.shipdesign.ShipNameFieldBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setValue(String) - Method in interface nxopen.geometricutilities.Extend

Deprecated.

Deprecated in NX8.5.0. To set the value of the expression modify the expression directly using GeometricUtilities.Extend#value and Expression.setRightHandSide(java.lang.String) .

setValue(Component) - Method in interface nxopen.layout2d.SelectComponent

Sets the object being selected
License requirements: None.

setValue(Component, View, Point3d) - Method in interface nxopen.layout2d.SelectComponent

The object being selected with the object's view and object's point
License requirements: None.

setValue(AdapterSignal) - Method in interface nxopen.mechatronics.SelectAdapterSignal

Sets the object being selected
License requirements: None.

setValue(AdapterSignal, View, Point3d) - Method in interface nxopen.mechatronics.SelectAdapterSignal

The object being selected with the object's view and object's point
License requirements: None.

setValue(CollisionSensor) - Method in interface nxopen.mechatronics.SelectCollisionSensor

Sets the object being selected
License requirements: None.

setValue(CollisionSensor, View, Point3d) - Method in interface nxopen.mechatronics.SelectCollisionSensor

The object being selected with the object's view and object's point
License requirements: None.

setValue(PhysicsConstraint) - Method in interface nxopen.mechatronics.SelectPhysicsConstraint

Sets the object being selected
License requirements: None.

setValue(PhysicsConstraint, View, Point3d) - Method in interface nxopen.mechatronics.SelectPhysicsConstraint

The object being selected with the object's view and object's point
License requirements: None.

setValue(PhysicsJoint) - Method in interface nxopen.mechatronics.SelectPhysicsJoint

Sets the object being selected
License requirements: None.

setValue(PhysicsJoint, View, Point3d) - Method in interface nxopen.mechatronics.SelectPhysicsJoint

The object being selected with the object's view and object's point
License requirements: None.

setValue(RigidBody) - Method in interface nxopen.mechatronics.SelectRigidBody

Sets the object being selected
License requirements: None.

setValue(RigidBody, View, Point3d) - Method in interface nxopen.mechatronics.SelectRigidBody

The object being selected with the object's view and object's point
License requirements: None.

setValue(SystemObject) - Method in interface nxopen.mechatronics.SelectSystemObject

Sets the object being selected
License requirements: None.

setValue(SystemObject, View, Point3d) - Method in interface nxopen.mechatronics.SelectSystemObject

The object being selected with the object's view and object's point
License requirements: None.

setValue(TagFormObject) - Method in interface nxopen.mechatronics.SelectTagFormObject

Sets the object being selected
License requirements: None.

setValue(TagFormObject, View, Point3d) - Method in interface nxopen.mechatronics.SelectTagFormObject

The object being selected with the object's view and object's point
License requirements: None.

setValue(ControlPort) - Method in interface nxopen.motion.SelectControlPort

Sets the object being selected
License requirements: None.

setValue(ControlPort, View, Point3d) - Method in interface nxopen.motion.SelectControlPort

The object being selected with the object's view and object's point
License requirements: None.

setValue(Joint) - Method in interface nxopen.motion.SelectJoint

Sets the object being selected
License requirements: None.

setValue(Joint, View, Point3d) - Method in interface nxopen.motion.SelectJoint

The object being selected with the object's view and object's point
License requirements: None.

setValue(Link) - Method in interface nxopen.motion.SelectLink

Sets the object being selected
License requirements: None.

setValue(Link, View, Point3d) - Method in interface nxopen.motion.SelectLink

The object being selected with the object's view and object's point
License requirements: None.

setValue(Marker) - Method in interface nxopen.motion.SelectMarker

Sets the object being selected
License requirements: None.

setValue(Marker, View, Point3d) - Method in interface nxopen.motion.SelectMarker

The object being selected with the object's view and object's point
License requirements: None.

setValue(Road) - Method in interface nxopen.motion.SelectRoad

Sets the object being selected
License requirements: None.

setValue(Road, View, Point3d) - Method in interface nxopen.motion.SelectRoad

The object being selected with the object's view and object's point
License requirements: None.

setValue(TirePropertyBasic) - Method in interface nxopen.motion.SelectTirePropertyBasic

Sets the object being selected
License requirements: None.

setValue(TirePropertyBasic, View, Point3d) - Method in interface nxopen.motion.SelectTirePropertyBasic

The object being selected with the object's view and object's point
License requirements: None.

setValue(TirePropertyCd) - Method in interface nxopen.motion.SelectTirePropertyCd

Sets the object being selected
License requirements: None.

setValue(TirePropertyCd, View, Point3d) - Method in interface nxopen.motion.SelectTirePropertyCd

The object being selected with the object's view and object's point
License requirements: None.

setValue(TirePropertyFt) - Method in interface nxopen.motion.SelectTirePropertyFt

Sets the object being selected
License requirements: None.

setValue(TirePropertyFt, View, Point3d) - Method in interface nxopen.motion.SelectTirePropertyFt

The object being selected with the object's view and object's point
License requirements: None.

setValue(TirePropertyMotorcycle) - Method in interface nxopen.motion.SelectTirePropertyMotorcycle

Sets the object being selected
License requirements: None.

setValue(TirePropertyMotorcycle, View, Point3d) - Method in interface nxopen.motion.SelectTirePropertyMotorcycle

The object being selected with the object's view and object's point
License requirements: None.

setValue(TirePropertyNonInertial) - Method in interface nxopen.motion.SelectTirePropertyNonInertial

Sets the object being selected
License requirements: None.

setValue(TirePropertyNonInertial, View, Point3d) - Method in interface nxopen.motion.SelectTirePropertyNonInertial

The object being selected with the object's view and object's point
License requirements: None.

setValue(TirePropertyTno) - Method in interface nxopen.motion.SelectTirePropertyTno

Sets the object being selected
License requirements: None.

setValue(TirePropertyTno, View, Point3d) - Method in interface nxopen.motion.SelectTirePropertyTno

The object being selected with the object's view and object's point
License requirements: None.

setValue(String, int) - Method in interface nxopen.options.ChangeList

Sets the value of an Options.OptionType#INT option.

setValue(String, double) - Method in interface nxopen.options.ChangeList

Sets the value of a Options.OptionType#REAL option.

setValue(String, String) - Method in interface nxopen.options.ChangeList

Sets the value of a Options.OptionType#STRING option.

setValue(String, String[]) - Method in interface nxopen.options.ChangeList

Sets the value of a Options.OptionType#STRING_LIST option.

setValue(String, boolean) - Method in interface nxopen.options.ChangeList

Sets the value of a Options.OptionType#LOGICAL option.

setValue(String, int) - Method in interface nxopen.options.DraftingStandardChangeList

Sets the value of an Options.OptionType#INT option.

setValue(String, double) - Method in interface nxopen.options.DraftingStandardChangeList

Sets the value of a Options.OptionType#REAL option.

setValue(String, String) - Method in interface nxopen.options.DraftingStandardChangeList

Sets the value of a Options.OptionType#STRING option.

setValue(String, String[]) - Method in interface nxopen.options.DraftingStandardChangeList

Sets the value of a Options.OptionType#STRING_LIST option.

setValue(String, boolean) - Method in interface nxopen.options.DraftingStandardChangeList

Sets the value of a Options.OptionType#LOGICAL option.

setValue(ControlPoint) - Method in interface nxopen.routing.SelectControlPoint

Sets the object being selected
License requirements: None.

setValue(ControlPoint, View, Point3d) - Method in interface nxopen.routing.SelectControlPoint

The object being selected with the object's view and object's point
License requirements: None.

setValue(ISegment) - Method in interface nxopen.routing.SelectISegment

Sets the object being selected
License requirements: None.

setValue(ISegment, View, Point3d) - Method in interface nxopen.routing.SelectISegment

The object being selected with the object's view and object's point
License requirements: None.

setValue(LineSegment) - Method in interface nxopen.routing.SelectLineSegment

Sets the object being selected
License requirements: None.

setValue(LineSegment, View, Point3d) - Method in interface nxopen.routing.SelectLineSegment

The object being selected with the object's view and object's point
License requirements: None.

setValue(Port) - Method in interface nxopen.routing.SelectPort

Sets the object being selected
License requirements: None.

setValue(Port, View, Point3d) - Method in interface nxopen.routing.SelectPort

The object being selected with the object's view and object's point
License requirements: None.

setValue(Run) - Method in interface nxopen.routing.SelectRun

Sets the object being selected
License requirements: None.

setValue(Run, View, Point3d) - Method in interface nxopen.routing.SelectRun

The object being selected with the object's view and object's point
License requirements: None.

setValue(Stock) - Method in interface nxopen.routing.SelectStock

Sets the object being selected
License requirements: None.

setValue(Stock, View, Point3d) - Method in interface nxopen.routing.SelectStock

The object being selected with the object's view and object's point
License requirements: None.

setValue(double) - Method in interface nxopen.Scalar

License requirements: None.

setValue(Body) - Method in interface nxopen.SelectBody

Sets the object being selected
License requirements: None.

setValue(Body, View, Point3d) - Method in interface nxopen.SelectBody

The object being selected with the object's view and object's point
License requirements: None.

setValue(CartesianCoordinateSystem) - Method in interface nxopen.SelectCartesianCoordinateSystem

Sets the object being selected
License requirements: None.

setValue(CartesianCoordinateSystem, View, Point3d) - Method in interface nxopen.SelectCartesianCoordinateSystem

The object being selected with the object's view and object's point
License requirements: None.

setValue(CoordinateSystem) - Method in interface nxopen.SelectCoordinateSystem

Sets the object being selected
License requirements: None.

setValue(CoordinateSystem, View, Point3d) - Method in interface nxopen.SelectCoordinateSystem

The object being selected with the object's view and object's point
License requirements: None.

setValue(Curve) - Method in interface nxopen.SelectCurve

Sets the object being selected
License requirements: None.

setValue(Curve, View, Point3d) - Method in interface nxopen.SelectCurve

The object being selected with the object's view and object's point
License requirements: None.

setValue(DatumPlane) - Method in interface nxopen.SelectDatumPlane

Sets the object being selected
License requirements: None.

setValue(DatumPlane, View, Point3d) - Method in interface nxopen.SelectDatumPlane

The object being selected with the object's view and object's point
License requirements: None.

setValue(DisplayableObject) - Method in interface nxopen.SelectDisplayableObject

Sets the object being selected
License requirements: None.

setValue(DisplayableObject, View, Point3d) - Method in interface nxopen.SelectDisplayableObject

The object being selected with the object's view and object's point
License requirements: None.

setValue(Edge) - Method in interface nxopen.SelectEdge

Sets the object being selected
License requirements: None.

setValue(Edge, View, Point3d) - Method in interface nxopen.SelectEdge

The object being selected with the object's view and object's point
License requirements: None.

setValue(Face) - Method in interface nxopen.SelectFace

Sets the object being selected
License requirements: None.

setValue(Face, View, Point3d) - Method in interface nxopen.SelectFace

The object being selected with the object's view and object's point
License requirements: None.

setValue(Group) - Method in interface nxopen.SelectGroup

Sets the object being selected
License requirements: None.

setValue(Group, View, Point3d) - Method in interface nxopen.SelectGroup

The object being selected with the object's view and object's point
License requirements: None.

setValue(IBaseCurve) - Method in interface nxopen.SelectIBaseCurve

Sets the object being selected
License requirements: None.

setValue(IBaseCurve, View, Point3d) - Method in interface nxopen.SelectIBaseCurve

The object being selected with the object's view and object's point
License requirements: None.

setValue(ICurve) - Method in interface nxopen.SelectICurve

Sets the object being selected
License requirements: None.

setValue(ICurve, View, Point3d) - Method in interface nxopen.SelectICurve

The object being selected with the object's view and object's point
License requirements: None.

setValue(IParameterizedSurface) - Method in interface nxopen.SelectIParameterizedSurface

Sets the object being selected
License requirements: None.

setValue(IParameterizedSurface, View, Point3d) - Method in interface nxopen.SelectIParameterizedSurface

The object being selected with the object's view and object's point
License requirements: None.

setValue(IReferenceAxis) - Method in interface nxopen.SelectIReferenceAxis

Sets the object being selected
License requirements: None.

setValue(IReferenceAxis, View, Point3d) - Method in interface nxopen.SelectIReferenceAxis

The object being selected with the object's view and object's point
License requirements: None.

setValue(ISurface) - Method in interface nxopen.SelectISurface

Sets the object being selected
License requirements: None.

setValue(ISurface, View, Point3d) - Method in interface nxopen.SelectISurface

The object being selected with the object's view and object's point
License requirements: None.

setValue(Line) - Method in interface nxopen.SelectLine

Sets the object being selected
License requirements: None.

setValue(Line, View, Point3d) - Method in interface nxopen.SelectLine

The object being selected with the object's view and object's point
License requirements: None.

setValue(NXObject) - Method in interface nxopen.SelectNXObject

Sets the object being selected
License requirements: None.

setValue(NXObject, View, Point3d) - Method in interface nxopen.SelectNXObject

The object being selected with the object's view and object's point
License requirements: None.

setValue(TaggedObject) - Method in interface nxopen.SelectObject

Sets the object being selected
License requirements: None.

setValue(TaggedObject, View, Point3d) - Method in interface nxopen.SelectObject

The object being selected with the object's view and object's point
License requirements: None.

setValue(Part) - Method in interface nxopen.SelectPart

Sets the object being selected
License requirements: None.

setValue(Part, View, Point3d) - Method in interface nxopen.SelectPart

The object being selected with the object's view and object's point
License requirements: None.

setValue(Point) - Method in interface nxopen.SelectPoint

Sets the object being selected
License requirements: None.

setValue(Point, View, Point3d) - Method in interface nxopen.SelectPoint

The object being selected with the object's view and object's point
License requirements: None.

setValue(Sketch) - Method in interface nxopen.SelectSketch

Sets the object being selected
License requirements: None.

setValue(Sketch, View, Point3d) - Method in interface nxopen.SelectSketch

The object being selected with the object's view and object's point
License requirements: None.

setValue(SmartObject) - Method in interface nxopen.SelectSmartObject

Sets the object being selected
License requirements: None.

setValue(SmartObject, View, Point3d) - Method in interface nxopen.SelectSmartObject

The object being selected with the object's view and object's point
License requirements: None.

setValue(Spline) - Method in interface nxopen.SelectSpline

Sets the object being selected
License requirements: None.

setValue(Spline, View, Point3d) - Method in interface nxopen.SelectSpline

The object being selected with the object's view and object's point
License requirements: None.

setValue(TaggedObject) - Method in interface nxopen.SelectTaggedObject

Sets the object being selected
License requirements: None.

setValue(TaggedObject, View, Point3d) - Method in interface nxopen.SelectTaggedObject

The object being selected with the object's view and object's point
License requirements: None.

setValue(View) - Method in interface nxopen.SelectView

Sets the object being selected
License requirements: None.

setValue(View, View, Point3d) - Method in interface nxopen.SelectView

The object being selected with the object's view and object's point
License requirements: None.

setValue(int) - Method in interface nxopen.uistyler.SelectionBox

Sets the value
License requirements: None.

setValue(String) - Method in interface nxopen.visualreporting.Condition

License requirements: nx_visual_reporting ("Visual Reporting")
.

setValue(String) - Method in interface nxopen.visualreporting.GroupLabel

License requirements: nx_visual_reporting ("Visual Reporting")
.

setValue(DatumPin) - Method in interface nxopen.weld.SelectDatumPin

Sets the object being selected
License requirements: None.

setValue(DatumPin, View, Point3d) - Method in interface nxopen.weld.SelectDatumPin

The object being selected with the object's view and object's point
License requirements: None.

setValue(DatumSurface) - Method in interface nxopen.weld.SelectDatumSurface

Sets the object being selected
License requirements: None.

setValue(DatumSurface, View, Point3d) - Method in interface nxopen.weld.SelectDatumSurface

The object being selected with the object's view and object's point
License requirements: None.

setValue0(double) - Method in interface nxopen.cam.Inheritable2dLength

License requirements: cam_base ("CAM BASE")
.

setValue1(double) - Method in interface nxopen.cam.Inheritable2dLength

License requirements: cam_base ("CAM BASE")
.

setValueA(double) - Method in interface nxopen.features.GeneralConicBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setValueAlias(String) - Method in interface nxopen.AttributePropertiesBaseBuilder

License requirements: None.

setValueAsBoolean(boolean) - Method in interface nxopen.cae.PostScenarioVariant

Set a typed value.

setValueAsComplex(Complex) - Method in interface nxopen.cae.PostScenarioVariant

Set a typed value.

setValueAsDouble(double) - Method in interface nxopen.cae.PostScenarioVariant

Set a typed value.

setValueAsInteger(int) - Method in interface nxopen.cae.PostScenarioVariant

Set a typed value.

setValueAsString(String) - Method in interface nxopen.blockstyler.Enumeration

License requirements: None.

setValueAsString(String) - Method in interface nxopen.blockstyler.LineFont

License requirements: None.

setValueAsString(String) - Method in interface nxopen.cae.PostScenarioVariant

Set a typed value.

setValueAsUnicodeString(String) - Method in interface nxopen.cae.PostScenarioVariant

Set a typed value.

setValueB(double) - Method in interface nxopen.features.GeneralConicBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setValueC(double) - Method in interface nxopen.features.GeneralConicBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setValueChanged(boolean) - Method in interface nxopen.weld.CharacteristicsValueBuilder

License requirements: ugweld ("UG WELD")
.

setValueD(double) - Method in interface nxopen.features.GeneralConicBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setValueDisplayFlag(boolean) - Method in interface nxopen.cae.SimBCDisplay

Sets the true/false flag based on whether the value of the BC is displayed in the graphics window
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setValueDouble(double) - Method in interface nxopen.weld.CharacteristicsValueBuilder

License requirements: ugweld ("UG WELD")
.

setValueE(double) - Method in interface nxopen.features.GeneralConicBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setValueF(double) - Method in interface nxopen.features.GeneralConicBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.

setValueFormat(ScaleValueFormatTypes) - Method in interface nxopen.drawings.ViewDetailLabelBuilder

License requirements: drafting ("DRAFTING")
.

setValueFormat(ScaleValueFormatTypes) - Method in interface nxopen.drawings.ViewLabelBuilder

License requirements: drafting ("DRAFTING")
.

setValueFormat(ScaleValueFormatTypes) - Method in interface nxopen.drawings.ViewSectionLabelBuilder

License requirements: drafting ("DRAFTING")
.

setValueFromString(String) - Method in interface nxopen.display.IrayPlusMatAttr

To set attribute value for specific fomatted attribute name The string attribute name format should be : "layer name-interface name-attribute name"
License requirements: None.

setValueInteger(int) - Method in interface nxopen.weld.CharacteristicsValueBuilder

License requirements: ugweld ("UG WELD")
.

setValueOfAttribute(FamilyAttribute, String) - Method in interface nxopen.partfamily.InstanceDefinition

Set the value for passed atribute with the value
License requirements: solid_modeling ("SOLIDS MODELING")
.

setValueOfCondition(Condition, String) - Method in interface nxopen.visualreporting.VisualReportBuilder

Sets the value of this Condition .

setValueOfGroupLabel(GroupLabel, String) - Method in interface nxopen.visualreporting.VisualReportBuilder

Sets the GroupLabel.value() of the given GroupLabel .

setValueOption(ResizeCurveBuilder.ValueType) - Method in interface nxopen.features.ResizeCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setValueOrder(String, String[]) - Method in interface nxopen.options.ChangeList

Sets the value of a Options.OptionType#REORDER_SEL_LIST option for which the list entries can be reordered.

setValueOrder(String, String[]) - Method in interface nxopen.options.DraftingStandardChangeList

Sets the value of a Options.OptionType#REORDER_SEL_LIST option for which the list entries can be reordered.

setValuePrecision(AutoDimensionBuilder.ValuePrecisionType) - Method in interface nxopen.tooling.AutoDimensionBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setValueReduction(double) - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setValues(int, int, double[]) - Method in interface nxopen.blockstyler.DoubleTable

Sets the Values in table
License requirements: None.

setValues(int, int, int[]) - Method in interface nxopen.blockstyler.IntegerTable

Sets the Values
License requirements: None.

setValues(double[]) - Method in interface nxopen.features.CustomDoubleArrayAttribute

Set the double values in attribute
License requirements: solid_modeling ("SOLIDS MODELING")
.

setValues(Expression[]) - Method in interface nxopen.features.CustomExpressionArrayAttribute

Set the expressions in the attribute
License requirements: solid_modeling ("SOLIDS MODELING")
.

setValues(int[]) - Method in interface nxopen.features.CustomIntegerArrayAttribute

Set the integer values to the attribute
License requirements: solid_modeling ("SOLIDS MODELING")
.

setValues(boolean[]) - Method in interface nxopen.features.CustomLogicalArrayAttribute

Set the logical values in the attribute
License requirements: solid_modeling ("SOLIDS MODELING")
.

setValues(String[]) - Method in interface nxopen.features.CustomStringArrayAttribute

Set the String values in the attribute
License requirements: solid_modeling ("SOLIDS MODELING")
.

setValues(TaggedObject[]) - Method in interface nxopen.features.CustomTagArrayAttribute

Set the references in the attribute and returns old references
License requirements: solid_modeling ("SOLIDS MODELING")
.

setValuesApplyOption(EdgePrepValuesBuilder.Apply) - Method in interface nxopen.weld.EdgePrepValuesBuilder

License requirements: structure_weld ("STRUCTURE WELD")
.

setValuesConcatenated(String) - Method in interface nxopen.blockstyler.MultilineString

License requirements: None.

setValueSelection(String, boolean[], String[]) - Method in interface nxopen.options.ChangeList

Sets the value of a Options.OptionType#REORDER_SEL_LIST option for which the list entries can be reordered as well as selected.

setValueSelection(String, boolean[], String[]) - Method in interface nxopen.options.DraftingStandardChangeList

Sets the value of a Options.OptionType#REORDER_SEL_LIST option for which the list entries can be reordered as well as selected.

setValuesOption(EdgePrepValuesBuilder.Option) - Method in interface nxopen.weld.EdgePrepValuesBuilder

License requirements: structure_weld ("STRUCTURE WELD")
.

setValuesOutsideTableInterpolation(FieldEvaluator.ValuesOutsideTableInterpolationEnum) - Method in interface nxopen.fields.FieldLinksTable

License requirements: None.

setValuesOutsideTableInterpolation(FieldEvaluator.ValuesOutsideTableInterpolationEnum) - Method in interface nxopen.fields.FieldTable

License requirements: None.

setValueString(String) - Method in interface nxopen.weld.CharacteristicsValueBuilder

License requirements: ugweld ("UG WELD")
.

setValueType(ForceValueTypes) - Method in interface nxopen.motion.ScalarForceBuilder

License requirements: mechanisms ("MECHANISMS")
.

setValueType(ForceValueTypes) - Method in interface nxopen.motion.ScalarTorqueBuilder

License requirements: mechanisms ("MECHANISMS")
.

setValueType(ForceValueTypes) - Method in interface nxopen.motion.VObject

License requirements: mechanisms ("MECHANISMS")
.

setValueWithCaeSetObjectInfo(Annotation, CaeObjectType.CaeSubType, int) - Method in interface nxopen.annotations.SelectAnnotation

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(Annotation, CaeObjectType.CaeSubType, int) - Method in interface nxopen.annotations.SelectAnnotationList

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObjectList.add(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(BaseCustomSymbol, CaeObjectType.CaeSubType, int) - Method in interface nxopen.annotations.SelectBaseCustomSymbolList

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObjectList.add(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(Dimension, CaeObjectType.CaeSubType, int) - Method in interface nxopen.annotations.SelectDimension

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(OrdinateDimension, CaeObjectType.CaeSubType, int) - Method in interface nxopen.annotations.SelectOrdinateDimensionList

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObjectList.add(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(TableSection, CaeObjectType.CaeSubType, int) - Method in interface nxopen.annotations.SelectTableSectionList

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObjectList.add(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(Component, CaeObjectType.CaeSubType, int) - Method in interface nxopen.assemblies.SelectComponent

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(Component, CaeObjectType.CaeSubType, int) - Method in interface nxopen.assemblies.SelectComponentList

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObjectList.add(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(CAEBody, CaeObjectType.CaeSubType, int) - Method in interface nxopen.cae.SelectCAEBody

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(CAEBody, CaeObjectType.CaeSubType, int) - Method in interface nxopen.cae.SelectCAEBodyList

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObjectList.add(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(CAEEdge, CaeObjectType.CaeSubType, int) - Method in interface nxopen.cae.SelectCAEEdge

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(CAEEdge, CaeObjectType.CaeSubType, int) - Method in interface nxopen.cae.SelectCAEEdgeList

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObjectList.add(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(CAEFace, CaeObjectType.CaeSubType, int) - Method in interface nxopen.cae.SelectCAEFace

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(CAEFace, CaeObjectType.CaeSubType, int) - Method in interface nxopen.cae.SelectCAEFaceList

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObjectList.add(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(FEElemFace, CaeObjectType.CaeSubType, int) - Method in interface nxopen.cae.SelectFEElemFaceList

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObjectList.add(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(FENode, CaeObjectType.CaeSubType, int) - Method in interface nxopen.cae.SelectFENode

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(FENode, CaeObjectType.CaeSubType, int) - Method in interface nxopen.cae.SelectFENodeList

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObjectList.add(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(Mesh, CaeObjectType.CaeSubType, int) - Method in interface nxopen.cae.SelectMeshList

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObjectList.add(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(CAMFeature, CaeObjectType.CaeSubType, int) - Method in interface nxopen.cam.SelectCAMFeature

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(CAMFeature, CaeObjectType.CaeSubType, int) - Method in interface nxopen.cam.SelectCAMFeatureList

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObjectList.add(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(DraftingView, CaeObjectType.CaeSubType, int) - Method in interface nxopen.drawings.SelectDraftingView

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(DraftingView, CaeObjectType.CaeSubType, int) - Method in interface nxopen.drawings.SelectDraftingViewList

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObjectList.add(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(DrawingRegion, CaeObjectType.CaeSubType, int) - Method in interface nxopen.drawings.SelectDrawingRegion

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(DrawingView, CaeObjectType.CaeSubType, int) - Method in interface nxopen.drawings.SelectDrawingView

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(DrawingView, CaeObjectType.CaeSubType, int) - Method in interface nxopen.drawings.SelectDrawingViewList

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObjectList.add(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(SectionLine, CaeObjectType.CaeSubType, int) - Method in interface nxopen.drawings.SelectSectionLine

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(FacetedBody, CaeObjectType.CaeSubType, int) - Method in interface nxopen.facet.SelectFacetedBody

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(FacetedBody, CaeObjectType.CaeSubType, int) - Method in interface nxopen.facet.SelectFacetedBodyList

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObjectList.add(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(DatumCsys, CaeObjectType.CaeSubType, int) - Method in interface nxopen.features.SelectDatumCsysList

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObjectList.add(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(Feature, CaeObjectType.CaeSubType, int) - Method in interface nxopen.features.SelectFeature

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(Feature, CaeObjectType.CaeSubType, int) - Method in interface nxopen.features.SelectFeatureList

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObjectList.add(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(FlatPattern, CaeObjectType.CaeSubType, int) - Method in interface nxopen.features.SelectFlatPattern

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(PartModule, CaeObjectType.CaeSubType, int) - Method in interface nxopen.features.SelectPartModule

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(SubdivisionBody, CaeObjectType.CaeSubType, int) - Method in interface nxopen.features.subdivision.SelectSubdivisionBodyList

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObjectList.add(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(Component, CaeObjectType.CaeSubType, int) - Method in interface nxopen.layout2d.SelectComponent

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(Component, CaeObjectType.CaeSubType, int) - Method in interface nxopen.layout2d.SelectComponentList

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObjectList.add(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(AdapterSignal, CaeObjectType.CaeSubType, int) - Method in interface nxopen.mechatronics.SelectAdapterSignal

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(CollisionSensor, CaeObjectType.CaeSubType, int) - Method in interface nxopen.mechatronics.SelectCollisionSensor

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(CollisionSensor, CaeObjectType.CaeSubType, int) - Method in interface nxopen.mechatronics.SelectCollisionSensorList

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObjectList.add(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(HydraulicCylinder, CaeObjectType.CaeSubType, int) - Method in interface nxopen.mechatronics.SelectHydraulicCylinderList

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObjectList.add(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(LogicObject, CaeObjectType.CaeSubType, int) - Method in interface nxopen.mechatronics.SelectLogicObjectList

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObjectList.add(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(PhysicsConstraint, CaeObjectType.CaeSubType, int) - Method in interface nxopen.mechatronics.SelectPhysicsConstraint

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(PhysicsJoint, CaeObjectType.CaeSubType, int) - Method in interface nxopen.mechatronics.SelectPhysicsJoint

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(PneumaticCylinder, CaeObjectType.CaeSubType, int) - Method in interface nxopen.mechatronics.SelectPneumaticCylinderList

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObjectList.add(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(RigidBody, CaeObjectType.CaeSubType, int) - Method in interface nxopen.mechatronics.SelectRigidBody

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(SystemObject, CaeObjectType.CaeSubType, int) - Method in interface nxopen.mechatronics.SelectSystemObject

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(TagFormObject, CaeObjectType.CaeSubType, int) - Method in interface nxopen.mechatronics.SelectTagFormObject

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(ControlPort, CaeObjectType.CaeSubType, int) - Method in interface nxopen.motion.SelectControlPort

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(Joint, CaeObjectType.CaeSubType, int) - Method in interface nxopen.motion.SelectJoint

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(Link, CaeObjectType.CaeSubType, int) - Method in interface nxopen.motion.SelectLink

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(Marker, CaeObjectType.CaeSubType, int) - Method in interface nxopen.motion.SelectMarker

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(Road, CaeObjectType.CaeSubType, int) - Method in interface nxopen.motion.SelectRoad

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(TirePropertyBasic, CaeObjectType.CaeSubType, int) - Method in interface nxopen.motion.SelectTirePropertyBasic

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(TirePropertyCd, CaeObjectType.CaeSubType, int) - Method in interface nxopen.motion.SelectTirePropertyCd

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(TirePropertyFt, CaeObjectType.CaeSubType, int) - Method in interface nxopen.motion.SelectTirePropertyFt

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(TirePropertyMotorcycle, CaeObjectType.CaeSubType, int) - Method in interface nxopen.motion.SelectTirePropertyMotorcycle

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(TirePropertyNonInertial, CaeObjectType.CaeSubType, int) - Method in interface nxopen.motion.SelectTirePropertyNonInertial

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(TirePropertyTno, CaeObjectType.CaeSubType, int) - Method in interface nxopen.motion.SelectTirePropertyTno

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(ControlPoint, CaeObjectType.CaeSubType, int) - Method in interface nxopen.routing.SelectControlPoint

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(ISegment, CaeObjectType.CaeSubType, int) - Method in interface nxopen.routing.SelectISegment

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(LineSegment, CaeObjectType.CaeSubType, int) - Method in interface nxopen.routing.SelectLineSegment

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(Port, CaeObjectType.CaeSubType, int) - Method in interface nxopen.routing.SelectPort

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(Run, CaeObjectType.CaeSubType, int) - Method in interface nxopen.routing.SelectRun

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(Stock, CaeObjectType.CaeSubType, int) - Method in interface nxopen.routing.SelectStock

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(Body, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectBody

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(Body, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectBodyList

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObjectList.add(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(CartesianCoordinateSystem, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectCartesianCoordinateSystem

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(CoordinateSystem, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectCoordinateSystem

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(CoordinateSystem, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectCoordinateSystemList

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObjectList.add(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(Curve, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectCurve

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(Curve, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectCurveList

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObjectList.add(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(DatumPlane, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectDatumPlane

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(DatumPlane, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectDatumPlaneList

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObjectList.add(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(DisplayableObject, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectDisplayableObject

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(DisplayableObject, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectDisplayableObjectList

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObjectList.add(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(Edge, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectEdge

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(Edge, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectEdgeList

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObjectList.add(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(Expression, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectExpressionList

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObjectList.add(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(Face, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectFace

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(Face, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectFaceList

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObjectList.add(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(Group, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectGroup

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(IBaseCurve, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectIBaseCurve

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(IBaseCurve, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectIBaseCurveList

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObjectList.add(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(IBasePlane, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectIBasePlaneList

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObjectList.add(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(ICurve, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectICurve

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(ICurve, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectICurveList

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObjectList.add(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(INXObject, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectINXObjectList

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObjectList.add(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(IParameterizedSurface, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectIParameterizedSurface

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(IParameterizedSurface, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectIParameterizedSurfaceList

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObjectList.add(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(IReferenceAxis, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectIReferenceAxis

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(ISurface, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectISurface

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(Line, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectLine

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(NXObject, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectNXObject

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(NXObject, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectNXObjectList

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObjectList.add(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(TaggedObject, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectObject

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(TaggedObject, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectObjectList

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObjectList.add(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(Part, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectPart

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(Part, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectPartList

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObjectList.add(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(Point, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectPoint

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(Point, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectPointList

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObjectList.add(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(Sketch, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectSketch

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(SmartObject, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectSmartObject

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(Spline, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectSpline

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(Spline, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectSplineList

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObjectList.add(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(TaggedObject, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectTaggedObject

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(TaggedObject, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectTaggedObjectList

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObjectList.add(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(View, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectView

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(DatumPin, CaeObjectType.CaeSubType, int) - Method in interface nxopen.weld.SelectDatumPin

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithCaeSetObjectInfo(DatumSurface, CaeObjectType.CaeSubType, int) - Method in interface nxopen.weld.SelectDatumSurface

Deprecated.

Deprecated in NX10.0.0. Use other versions of SelectObject.setValue(nxopen.TaggedObject) .

setValueWithSnap(InferSnapType.SnapType, Annotation, View, Point3d, Annotation, View, Point3d) - Method in interface nxopen.annotations.SelectAnnotation

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, Annotation, View, Point3d, Annotation, View, Point3d) - Method in interface nxopen.annotations.SelectAnnotationList

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, BaseCustomSymbol, View, Point3d, BaseCustomSymbol, View, Point3d) - Method in interface nxopen.annotations.SelectBaseCustomSymbolList

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, Dimension, View, Point3d, Dimension, View, Point3d) - Method in interface nxopen.annotations.SelectDimension

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, OrdinateDimension, View, Point3d, OrdinateDimension, View, Point3d) - Method in interface nxopen.annotations.SelectOrdinateDimensionList

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, TableSection, View, Point3d, TableSection, View, Point3d) - Method in interface nxopen.annotations.SelectTableSectionList

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, Component, View, Point3d, Component, View, Point3d) - Method in interface nxopen.assemblies.SelectComponent

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, Component, View, Point3d, Component, View, Point3d) - Method in interface nxopen.assemblies.SelectComponentList

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, CAEBody, View, Point3d, CAEBody, View, Point3d) - Method in interface nxopen.cae.SelectCAEBody

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, CAEBody, View, Point3d, CAEBody, View, Point3d) - Method in interface nxopen.cae.SelectCAEBodyList

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, CAEEdge, View, Point3d, CAEEdge, View, Point3d) - Method in interface nxopen.cae.SelectCAEEdge

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, CAEEdge, View, Point3d, CAEEdge, View, Point3d) - Method in interface nxopen.cae.SelectCAEEdgeList

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, CAEFace, View, Point3d, CAEFace, View, Point3d) - Method in interface nxopen.cae.SelectCAEFace

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, CAEFace, View, Point3d, CAEFace, View, Point3d) - Method in interface nxopen.cae.SelectCAEFaceList

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, FEElemFace, View, Point3d, FEElemFace, View, Point3d) - Method in interface nxopen.cae.SelectFEElemFaceList

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, FENode, View, Point3d, FENode, View, Point3d) - Method in interface nxopen.cae.SelectFENode

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, FENode, View, Point3d, FENode, View, Point3d) - Method in interface nxopen.cae.SelectFENodeList

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, Mesh, View, Point3d, Mesh, View, Point3d) - Method in interface nxopen.cae.SelectMeshList

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, CAMFeature, View, Point3d, CAMFeature, View, Point3d) - Method in interface nxopen.cam.SelectCAMFeature

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, CAMFeature, View, Point3d, CAMFeature, View, Point3d) - Method in interface nxopen.cam.SelectCAMFeatureList

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, DraftingView, View, Point3d, DraftingView, View, Point3d) - Method in interface nxopen.drawings.SelectDraftingView

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, DraftingView, View, Point3d, DraftingView, View, Point3d) - Method in interface nxopen.drawings.SelectDraftingViewList

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, DrawingRegion, View, Point3d, DrawingRegion, View, Point3d) - Method in interface nxopen.drawings.SelectDrawingRegion

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, DrawingView, View, Point3d, DrawingView, View, Point3d) - Method in interface nxopen.drawings.SelectDrawingView

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, DrawingView, View, Point3d, DrawingView, View, Point3d) - Method in interface nxopen.drawings.SelectDrawingViewList

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, SectionLine, View, Point3d, SectionLine, View, Point3d) - Method in interface nxopen.drawings.SelectSectionLine

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, FacetedBody, View, Point3d, FacetedBody, View, Point3d) - Method in interface nxopen.facet.SelectFacetedBody

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, FacetedBody, View, Point3d, FacetedBody, View, Point3d) - Method in interface nxopen.facet.SelectFacetedBodyList

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, DatumCsys, View, Point3d, DatumCsys, View, Point3d) - Method in interface nxopen.features.SelectDatumCsysList

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, Feature, View, Point3d, Feature, View, Point3d) - Method in interface nxopen.features.SelectFeature

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, Feature, View, Point3d, Feature, View, Point3d) - Method in interface nxopen.features.SelectFeatureList

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, FlatPattern, View, Point3d, FlatPattern, View, Point3d) - Method in interface nxopen.features.SelectFlatPattern

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, PartModule, View, Point3d, PartModule, View, Point3d) - Method in interface nxopen.features.SelectPartModule

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, SubdivisionBody, View, Point3d, SubdivisionBody, View, Point3d) - Method in interface nxopen.features.subdivision.SelectSubdivisionBodyList

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, Component, View, Point3d, Component, View, Point3d) - Method in interface nxopen.layout2d.SelectComponent

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, Component, View, Point3d, Component, View, Point3d) - Method in interface nxopen.layout2d.SelectComponentList

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, AdapterSignal, View, Point3d, AdapterSignal, View, Point3d) - Method in interface nxopen.mechatronics.SelectAdapterSignal

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, CollisionSensor, View, Point3d, CollisionSensor, View, Point3d) - Method in interface nxopen.mechatronics.SelectCollisionSensor

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, CollisionSensor, View, Point3d, CollisionSensor, View, Point3d) - Method in interface nxopen.mechatronics.SelectCollisionSensorList

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, HydraulicCylinder, View, Point3d, HydraulicCylinder, View, Point3d) - Method in interface nxopen.mechatronics.SelectHydraulicCylinderList

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, LogicObject, View, Point3d, LogicObject, View, Point3d) - Method in interface nxopen.mechatronics.SelectLogicObjectList

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, PhysicsConstraint, View, Point3d, PhysicsConstraint, View, Point3d) - Method in interface nxopen.mechatronics.SelectPhysicsConstraint

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, PhysicsJoint, View, Point3d, PhysicsJoint, View, Point3d) - Method in interface nxopen.mechatronics.SelectPhysicsJoint

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, PneumaticCylinder, View, Point3d, PneumaticCylinder, View, Point3d) - Method in interface nxopen.mechatronics.SelectPneumaticCylinderList

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, RigidBody, View, Point3d, RigidBody, View, Point3d) - Method in interface nxopen.mechatronics.SelectRigidBody

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, SystemObject, View, Point3d, SystemObject, View, Point3d) - Method in interface nxopen.mechatronics.SelectSystemObject

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, TagFormObject, View, Point3d, TagFormObject, View, Point3d) - Method in interface nxopen.mechatronics.SelectTagFormObject

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, ControlPort, View, Point3d, ControlPort, View, Point3d) - Method in interface nxopen.motion.SelectControlPort

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, Joint, View, Point3d, Joint, View, Point3d) - Method in interface nxopen.motion.SelectJoint

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, Link, View, Point3d, Link, View, Point3d) - Method in interface nxopen.motion.SelectLink

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, Marker, View, Point3d, Marker, View, Point3d) - Method in interface nxopen.motion.SelectMarker

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, Road, View, Point3d, Road, View, Point3d) - Method in interface nxopen.motion.SelectRoad

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, TirePropertyBasic, View, Point3d, TirePropertyBasic, View, Point3d) - Method in interface nxopen.motion.SelectTirePropertyBasic

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, TirePropertyCd, View, Point3d, TirePropertyCd, View, Point3d) - Method in interface nxopen.motion.SelectTirePropertyCd

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, TirePropertyFt, View, Point3d, TirePropertyFt, View, Point3d) - Method in interface nxopen.motion.SelectTirePropertyFt

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, TirePropertyMotorcycle, View, Point3d, TirePropertyMotorcycle, View, Point3d) - Method in interface nxopen.motion.SelectTirePropertyMotorcycle

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, TirePropertyNonInertial, View, Point3d, TirePropertyNonInertial, View, Point3d) - Method in interface nxopen.motion.SelectTirePropertyNonInertial

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, TirePropertyTno, View, Point3d, TirePropertyTno, View, Point3d) - Method in interface nxopen.motion.SelectTirePropertyTno

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, ControlPoint, View, Point3d, ControlPoint, View, Point3d) - Method in interface nxopen.routing.SelectControlPoint

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, ISegment, View, Point3d, ISegment, View, Point3d) - Method in interface nxopen.routing.SelectISegment

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, LineSegment, View, Point3d, LineSegment, View, Point3d) - Method in interface nxopen.routing.SelectLineSegment

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, Port, View, Point3d, Port, View, Point3d) - Method in interface nxopen.routing.SelectPort

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, Run, View, Point3d, Run, View, Point3d) - Method in interface nxopen.routing.SelectRun

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, Stock, View, Point3d, Stock, View, Point3d) - Method in interface nxopen.routing.SelectStock

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, Body, View, Point3d, Body, View, Point3d) - Method in interface nxopen.SelectBody

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, Body, View, Point3d, Body, View, Point3d) - Method in interface nxopen.SelectBodyList

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, CartesianCoordinateSystem, View, Point3d, CartesianCoordinateSystem, View, Point3d) - Method in interface nxopen.SelectCartesianCoordinateSystem

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, CoordinateSystem, View, Point3d, CoordinateSystem, View, Point3d) - Method in interface nxopen.SelectCoordinateSystem

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, CoordinateSystem, View, Point3d, CoordinateSystem, View, Point3d) - Method in interface nxopen.SelectCoordinateSystemList

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, Curve, View, Point3d, Curve, View, Point3d) - Method in interface nxopen.SelectCurve

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, Curve, View, Point3d, Curve, View, Point3d) - Method in interface nxopen.SelectCurveList

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, DatumPlane, View, Point3d, DatumPlane, View, Point3d) - Method in interface nxopen.SelectDatumPlane

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, DatumPlane, View, Point3d, DatumPlane, View, Point3d) - Method in interface nxopen.SelectDatumPlaneList

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, DisplayableObject, View, Point3d, DisplayableObject, View, Point3d) - Method in interface nxopen.SelectDisplayableObject

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, DisplayableObject, View, Point3d, DisplayableObject, View, Point3d) - Method in interface nxopen.SelectDisplayableObjectList

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, Edge, View, Point3d, Edge, View, Point3d) - Method in interface nxopen.SelectEdge

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, Edge, View, Point3d, Edge, View, Point3d) - Method in interface nxopen.SelectEdgeList

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, Expression, View, Point3d, Expression, View, Point3d) - Method in interface nxopen.SelectExpressionList

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, Face, View, Point3d, Face, View, Point3d) - Method in interface nxopen.SelectFace

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, Face, View, Point3d, Face, View, Point3d) - Method in interface nxopen.SelectFaceList

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, Group, View, Point3d, Group, View, Point3d) - Method in interface nxopen.SelectGroup

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, IBaseCurve, View, Point3d, IBaseCurve, View, Point3d) - Method in interface nxopen.SelectIBaseCurve

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, IBaseCurve, View, Point3d, IBaseCurve, View, Point3d) - Method in interface nxopen.SelectIBaseCurveList

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, IBasePlane, View, Point3d, IBasePlane, View, Point3d) - Method in interface nxopen.SelectIBasePlaneList

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, ICurve, View, Point3d, ICurve, View, Point3d) - Method in interface nxopen.SelectICurve

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, ICurve, View, Point3d, ICurve, View, Point3d) - Method in interface nxopen.SelectICurveList

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, INXObject, View, Point3d, INXObject, View, Point3d) - Method in interface nxopen.SelectINXObjectList

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, IParameterizedSurface, View, Point3d, IParameterizedSurface, View, Point3d) - Method in interface nxopen.SelectIParameterizedSurface

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, IParameterizedSurface, View, Point3d, IParameterizedSurface, View, Point3d) - Method in interface nxopen.SelectIParameterizedSurfaceList

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, IReferenceAxis, View, Point3d, IReferenceAxis, View, Point3d) - Method in interface nxopen.SelectIReferenceAxis

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, ISurface, View, Point3d, ISurface, View, Point3d) - Method in interface nxopen.SelectISurface

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, Line, View, Point3d, Line, View, Point3d) - Method in interface nxopen.SelectLine

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, NXObject, View, Point3d, NXObject, View, Point3d) - Method in interface nxopen.SelectNXObject

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, NXObject, View, Point3d, NXObject, View, Point3d) - Method in interface nxopen.SelectNXObjectList

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, TaggedObject, View, Point3d, TaggedObject, View, Point3d) - Method in interface nxopen.SelectObject

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, TaggedObject, View, Point3d, TaggedObject, View, Point3d) - Method in interface nxopen.SelectObjectList

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, Part, View, Point3d, Part, View, Point3d) - Method in interface nxopen.SelectPart

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, Part, View, Point3d, Part, View, Point3d) - Method in interface nxopen.SelectPartList

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, Point, View, Point3d, Point, View, Point3d) - Method in interface nxopen.SelectPoint

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, Point, View, Point3d, Point, View, Point3d) - Method in interface nxopen.SelectPointList

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, Sketch, View, Point3d, Sketch, View, Point3d) - Method in interface nxopen.SelectSketch

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, SmartObject, View, Point3d, SmartObject, View, Point3d) - Method in interface nxopen.SelectSmartObject

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, Spline, View, Point3d, Spline, View, Point3d) - Method in interface nxopen.SelectSpline

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, Spline, View, Point3d, Spline, View, Point3d) - Method in interface nxopen.SelectSplineList

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, TaggedObject, View, Point3d, TaggedObject, View, Point3d) - Method in interface nxopen.SelectTaggedObject

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, TaggedObject, View, Point3d, TaggedObject, View, Point3d) - Method in interface nxopen.SelectTaggedObjectList

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, View, View, Point3d, View, View, Point3d) - Method in interface nxopen.SelectView

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, DatumPin, View, Point3d, DatumPin, View, Point3d) - Method in interface nxopen.weld.SelectDatumPin

The object being selected with the objects view and objects point and snap information.

setValueWithSnap(InferSnapType.SnapType, DatumSurface, View, Point3d, DatumSurface, View, Point3d) - Method in interface nxopen.weld.SelectDatumSurface

The object being selected with the objects view and objects point and snap information.

setValveType(HydraulicValveBuilder.OutputValveType) - Method in interface nxopen.mechatronics.HydraulicValveBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setValveType(PneumaticValveBuilder.OutputValveType) - Method in interface nxopen.mechatronics.PneumaticValveBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setVariable(DAODesignVariableBuilder.Variable, Expression) - Method in interface nxopen.cae.optimization.DAODesignVariableBuilder

Sets the design variable
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setVariable(ControlInputPortBuilder.MeasuredVariable) - Method in interface nxopen.motion.ControlInputPortBuilder

License requirements: mechanisms ("MECHANISMS")
.

setVariable(ControlOutputBuilder.VariableType) - Method in interface nxopen.motion.ControlOutputBuilder

License requirements: mechanisms ("MECHANISMS")
.

setVariable(String, String) - Method in interface nxopen.uf.UF

Refer to UF_set_variable for documentation.

setVariableAngleOption() - Method in interface nxopen.features.DraftBuilder

Sets the Variable Angle option
License requirements: solid_modeling ("SOLIDS MODELING")
.

setVariableBevelAngles(double[]) - Method in interface nxopen.weld.WeldJointBuilder

This method is for use with the variable bevel callback.

setVariableIncrementListData(int, double) - Method in interface nxopen.cam.CenterlineDrillVariableIncrementBuilder

Create a new variable increment at last of list, name maybe changed if not unique
License requirements: cam_base ("CAM BASE")
.

setVariableType(TBSDesignResponseBuilder.Response) - Method in interface nxopen.cae.optimization.TBSDesignResponseBuilder

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setVariance(PitchSetting.VarianceTypes) - Method in interface nxopen.cam.PitchSetting

License requirements: cam_base ("CAM BASE")
.

setVariantConfigurationsForDisplay(Tag, int, UFUgmgr.VariantConfiguration[], boolean[]) - Method in interface nxopen.uf.UFUgmgr

Refer to UF_UGMGR_set_variant_configurations_for_display for documentation.

setVariantConfigurationsForLoad(int, UFUgmgr.VariantConfiguration[], boolean[]) - Method in interface nxopen.uf.UFUgmgr

Refer to UF_UGMGR_set_variant_configurations_for_load for documentation.

setVarName(String) - Method in interface nxopen.cam.InspectionCmmCommandBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setVarOverlapMax(int) - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setVarOverlapMin(int) - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder

License requirements: nx_ship_concept ("Ship Concept")
.

setVarScope(InspectionCmmCommandBuilder.VarScopes) - Method in interface nxopen.cam.InspectionCmmCommandBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setVarType(InspectionCmmCommandBuilder.VarTypes) - Method in interface nxopen.cam.InspectionCmmCommandBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setVclose(MeshParameterData.Type) - Method in interface nxopen.MeshParameterData

Sets
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

setVCount(int) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setVdcCoordinates(CGMBuilder.Vdc) - Method in interface nxopen.CGMBuilder

License requirements: None.

setVDegree(int) - Method in interface nxopen.geometricutilities.DegreesAndSegmentsOrPatchesBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setVdegree(int) - Method in interface nxopen.MeshParameterData

Sets
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

setVDimension(int, int) - Method in interface nxopen.geometricutilities.ControlPoleManagerData

Sets dimension in V direction of a group of poles
License requirements: studio_free_form ("STUDIO FREE FORM")
.

setVecDirection(Direction) - Method in interface nxopen.cam.FeatureRecognitionBuilder

Deprecated.

Deprecated in NX8.5.0. Use CAM.FeatureRecognitionBuilder#setMachiningAccessDirection instead.

setVector(String, Vector3d) - Method in interface nxopen.blockstyler.PropertyList

Sets the vector value for the given property name.

setVector(Vector3d) - Method in interface nxopen.blockstyler.SpecifyVector

License requirements: None.

setVector(Direction) - Method in interface nxopen.cae.BeamSectionOrientationOptions

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setVector(Direction) - Method in interface nxopen.cae.ElementExtrudeBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setVector(Direction) - Method in interface nxopen.cae.ElementProjectBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setVector(Direction) - Method in interface nxopen.cae.ElementTranslateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setVector(Direction) - Method in interface nxopen.cae.NodeProjectBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setVector(Direction) - Method in interface nxopen.cae.NodeTranslateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setVector(Point3d) - Method in interface nxopen.cae.PostGraphAlongPathBuilder

Set vector for extracting data for x axis
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setVector(Direction) - Method in interface nxopen.cae.ShellEADBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setVector(NXObject) - Method in interface nxopen.cam.BoundaryTurnMemberOffset

License requirements: cam_base ("CAM BASE")
.

setVector(Direction) - Method in interface nxopen.cam.CutAngle

License requirements: cam_base ("CAM BASE")
.

setVector(Direction) - Method in interface nxopen.cam.GeometryGroup

License requirements: cam_base ("CAM BASE")
.

setVector(Direction) - Method in interface nxopen.cam.LaserLinearMove

License requirements: cam_base ("CAM BASE")
.

setVector(SmartObject) - Method in interface nxopen.cam.NcmPlanarEngRetBuilder

License requirements: cam_base ("CAM BASE")
.

setVector(SmartObject) - Method in interface nxopen.cam.NcmScEngRetBuilder

License requirements: cam_base ("CAM BASE")
.

setVector(Direction) - Method in interface nxopen.cam.NormalToToolAxisMoveBuilder

License requirements: None.

setVector(NXObject) - Method in interface nxopen.cam.ProbeInspectSurfacePointMoveBuilder

License requirements: None.

setVector(Direction) - Method in interface nxopen.cam.ProjVecCiBuilder

License requirements: cam_base ("CAM BASE")
.

setVector(Direction) - Method in interface nxopen.cam.RotaryPointMoveBuilder

License requirements: None.

setVector(Direction) - Method in interface nxopen.cam.ToolAxisBase

License requirements: cam_base ("CAM BASE")
.

setVector(NXObject) - Method in interface nxopen.cam.TrimPoint

License requirements: cam_base ("CAM BASE")
.

setVector(NXObject) - Method in interface nxopen.cam.TurnProbeInspectPointMoveBuilder

License requirements: None.

setVector(NXObject) - Method in interface nxopen.cam.UdeParameter

License requirements: cam_base ("CAM BASE")
.

setVector(Direction) - Method in interface nxopen.cam.VectorDistanceMoveBuilder

License requirements: None.

setVector(Direction) - Method in interface nxopen.die.DieDirectionBuilder

License requirements: None.

setVector(Direction) - Method in interface nxopen.die.DieLocationBuilder

License requirements: None.

setVector(Vector3d) - Method in interface nxopen.Direction

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setVector(Direction) - Method in interface nxopen.features.CircularBlendCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setVector(Direction) - Method in interface nxopen.features.DatumAxisBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setVector(Direction) - Method in interface nxopen.features.FitSurfaceBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setVector(Direction) - Method in interface nxopen.features.LawExtensionBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING")
.

setVector(Direction) - Method in interface nxopen.features.LawExtensionBuilderEx

License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING")
.

setVector(Direction) - Method in interface nxopen.features.ScaleBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setVector(Direction) - Method in interface nxopen.features.subdivision.SubdivisionExtrudeCageBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setVector(Direction) - Method in interface nxopen.geometricanalysis.CurveAnalysisCombsBuilder

Deprecated.

Deprecated in NX8.5.0. Use CurveCurvatureAnalysis .

setVector(Direction) - Method in interface nxopen.geometricanalysis.CurveAnalysisInflectionsBuilder

Deprecated.

Deprecated in NX8.5.0. Use GeometricAnalysis.CurveCurvatureAnalysisBuilder .

setVector(Direction) - Method in interface nxopen.geometricanalysis.CurveAnalysisPeaksBuilder

Deprecated.

Deprecated in NX8.5.0. Use GeometricAnalysis.CurveCurvatureAnalysis .

setVector(Direction) - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder

License requirements: None.

setVector(Direction) - Method in interface nxopen.geometricanalysis.RadiusAnalysisBuilder

License requirements: None.

setVector(Direction) - Method in interface nxopen.geometricanalysis.SlopeAnalysisBuilder

License requirements: None.

setVector(Direction) - Method in interface nxopen.geometricanalysis.SurfaceIntersectionBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setVector(Direction) - Method in interface nxopen.geometricutilities.MovePoleBuilder

License requirements: None.

setVector(Direction) - Method in interface nxopen.geometricutilities.SpineDefinitionBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setVector(Direction) - Method in interface nxopen.mechanicalrouting.TransformBlockBuilder

License requirements: routing_base ("Routing Basic")
.

setVector(Direction) - Method in interface nxopen.mechatronics.SlidingJointBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setVector(Direction) - Method in interface nxopen.motion.LinkAttachmentData

License requirements: None.

setVector(Vector3d) - Method in interface nxopen.Offset

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setVector(String, Vector3d) - Method in interface nxopen.PropertyContainer

Sets the vector value for the given property name.

setVector(Direction) - Method in interface nxopen.routing.electrical.AssignProxyBuilder

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setVector(UFVariant, String, Tag) - Method in interface nxopen.uf.UFUde

Refer to UF_UDE_set_vector for documentation.

setVector(Direction) - Method in interface nxopen.weld.JointmarkBuilder

License requirements: ugweld ("UG WELD")
.

setVector1(Direction) - Method in interface nxopen.MeasureAngleBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setVector2(Direction) - Method in interface nxopen.MeasureAngleBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setVector3Value(Vector3d) - Method in interface nxopen.cam.CAMAttribute

Set the feature attribute vector3 value for a vector3 type attribute
License requirements: cam_base ("CAM BASE"), cam_base ("CAM BASE")
.

setVectorChoice(BeamEADBuilder.VectorChoiceType) - Method in interface nxopen.cae.BeamEADBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setVectorComponentDirection(Direction) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setVectorConstraint(Direction) - Method in interface nxopen.features.FitSurfaceBuilder

License requirements: nx_freeform_2 ("advanced freeform modeling")
.

setVectorDefineDirection(Direction) - Method in interface nxopen.tooling.SectionLineCreationBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setVectorDirection(Direction) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setVectorDistance(double) - Method in interface nxopen.cam.BoundaryTurnMemberOffset

License requirements: cam_base ("CAM BASE")
.

setVectorFieldWrapperPropertyValue(String, VectorFieldWrapper) - Method in interface nxopen.cae.PropertyTable

Sets the vector field wrapper VectorFieldWrapper
License requirements: None.

setVectorForAlong(Direction) - Method in interface nxopen.geometricutilities.PatternOrientation

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setVectorForceTorque(Tag, UFMotion.VectorForceTorque) - Method in interface nxopen.uf.UFMotion

Refer to UF_MOTION_set_vector_force_torque for documentation.

setVectorForRamp(Direction) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder

License requirements: None.

setVectorOption(HingeLineBuilder.Hingeline) - Method in interface nxopen.drawings.HingeLineBuilder

License requirements: None.

setVectorOrigin(Point) - Method in interface nxopen.features.GuidedExtensionBuilderEx

License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setVectorPlaces(int) - Method in interface nxopen.cam.InspectionCmmCommandBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setVectorPropertyValue(String, Direction) - Method in interface nxopen.cae.PropertyTable

Sets the direction Direction value of the property
License requirements: None.

setVectorScale(double) - Method in interface nxopen.motion.LoadTransferBuilder

License requirements: mechanisms ("MECHANISMS")
.

setVectorSource(Direction) - Method in interface nxopen.cae.NodeTranslateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setVectorTarget(Direction) - Method in interface nxopen.cae.NodeTranslateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setVectorValue(String, Vector3d) - Method in interface nxopen.cam.Cycle

Set the vector of the parameter
License requirements: cam_base ("CAM BASE")
.

setVectorViewVec(Direction) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setVectorXc(double) - Method in interface nxopen.cam.TurnThreadEngageRetractBuilder

License requirements: cam_base ("CAM BASE")
.

setVectorYc(double) - Method in interface nxopen.cam.TurnThreadEngageRetractBuilder

License requirements: cam_base ("CAM BASE")
.

setVehicle(HumanPosturePredictionBuilder.VehicleType) - Method in interface nxopen.HumanPosturePredictionBuilder

License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setVehicleCategory(String) - Method in interface nxopen.features.vehicledesign.BaseDataBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setVehicleCoordinateSystem(int, Point3d, Matrix3x3) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

Set the vehicle coordinate system.

setVehicleDescription(String) - Method in interface nxopen.features.vehicledesign.BaseDataBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setVehiclePackagingDataName(String) - Method in interface nxopen.HumanPosturePredictionBuilder

License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setVehicleWidth(double) - Method in interface nxopen.features.vehicledesign.BaseDataBuilder

Deprecated.

Deprecated in NX9.0.1. Obtain the expression using BaseDataBuilder.vehicleWidthExp() to query or edit it.

setVelocity(double) - Method in interface nxopen.motion.DriverOperation

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using DriverOperation.velocityExpression() to query or edit it.

setVelocityVector(Direction) - Method in interface nxopen.mechatronics.TransportSurfaceBuilder

License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

setVEnabled(boolean) - Method in interface nxopen.features.IsoparametricCurvesBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setVEnabled(boolean) - Method in interface nxopen.geometricanalysis.sectionanalysis.IsoparametricBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setVEnd(double) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setVEndDeg(double) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setVEndDist(double) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setVEndMode(InspectionMethodBuilder.UVModeTypes) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setVEndSweep(double) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setVentilationHoles(boolean) - Method in interface nxopen.features.shipdesign.ProfileListBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setVersion(int) - Method in interface nxopen.cae.AfuHeaderId

Sets the version of AFU Header Id
License requirements: nx_ftk ("NX Advanced Graphing")
.

setVersionObjects(boolean) - Method in interface nxopen.preferences.PartDrafting

Sets the drafting version objects setting when updating drafting objects and member views
License requirements: None.

setVertex(Point3d) - Method in interface nxopen.features.sheetmetal.FlangeBuilder

Sets the vertex on the flange edge, needed to dimension the flange width.

setVertex1(Point) - Method in interface nxopen.facet.SewFacetBodyBuilder

License requirements: studio_free_form ("STUDIO FREE FORM") OR die_engineering ("DIE ENGINEERING")
.

setVertex1Range1(Point) - Method in interface nxopen.facet.BridgeFacetBodyBuilder

License requirements: None.

setVertex1Range2(Point) - Method in interface nxopen.facet.BridgeFacetBodyBuilder

License requirements: None.

setVertex2(Point) - Method in interface nxopen.facet.SewFacetBodyBuilder

License requirements: studio_free_form ("STUDIO FREE FORM") OR die_engineering ("DIE ENGINEERING")
.

setVertex2Range1(Point) - Method in interface nxopen.facet.BridgeFacetBodyBuilder

License requirements: None.

setVertex2Range2(Point) - Method in interface nxopen.facet.BridgeFacetBodyBuilder

License requirements: None.

setVertexColor(int) - Method in interface nxopen.preferences.SubdivisionModelingPreferences

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setVertexCoords(int, Point2d) - Method in interface nxopen.geometricutilities.ShapeFrameBuilder

Sets the coordinates of the i-th vertex of the frame with respect to the plane
License requirements: None.

setVertexNode(TaggedObject, boolean) - Method in interface nxopen.cae.ManualMorphBuilder

Sets the flag for node-to-vertex map for node-to-edge mapping type
License requirements: nx_masterfem ("Finite Element Modeling")
.

setVertexOfFacet(Tag, int, int, double[]) - Method in interface nxopen.uf.UFFacet

Refer to UF_FACET_set_vertex_of_facet for documentation.

setVertexOnCurveEnabled(boolean) - Method in interface nxopen.features.CurveFinderBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setVertexOnCurveSketchGroupEnabled(boolean) - Method in interface nxopen.features.CurveFinderBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

setVertexPointX(double) - Method in interface nxopen.cam.InspectionConeFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setVertexPointY(double) - Method in interface nxopen.cam.InspectionConeFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setVertexPointZ(double) - Method in interface nxopen.cam.InspectionConeFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setVertexSelectors(Edge[], RegionTracker.ExtremityType[]) - Method in interface nxopen.geometricutilities.RegionTracker

The input target or tool vertices (edge extremities) used to identify the region
License requirements: solid_modeling ("SOLIDS MODELING")
.

setVertexSize(SubdivisionModelingPreferences.VertexSizeTypes) - Method in interface nxopen.preferences.SubdivisionModelingPreferences

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setVertexStyle(SubdivisionModelingPreferences.VertexStyleTypes) - Method in interface nxopen.preferences.SubdivisionModelingPreferences

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setVertical(boolean) - Method in interface nxopen.annotations.BaseNote

Sets a flag indicating whether the note is vertical.

setVertical(boolean) - Method in interface nxopen.InferredConstraintsBuilder

License requirements: None.

setVertical(boolean) - Method in interface nxopen.SketchAutoConstrainBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setVerticalAlignment(boolean) - Method in interface nxopen.InferredConstraintsBuilder

License requirements: None.

setVerticalAttachment(LeaderVerticalAttachment) - Method in interface nxopen.annotations.LeaderData

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setVerticalCarcassEffects(boolean) - Method in interface nxopen.motion.TirePropertyHighOrderParameters

License requirements: mechanisms ("MECHANISMS")
.

setVerticalCenteringMark(BordersAndZonesBuilder.VerticalCenteringMarkType) - Method in interface nxopen.drawings.BordersAndZonesBuilder

Deprecated.

Deprecated in NX10.0.0. Use SheetBorderSettingsBuilder.centeringMarksVertical() instead.

setVerticalFlip(boolean) - Method in interface nxopen.annotations.BaseCustomSymbolBuilder

License requirements: drafting ("DRAFTING")
.

setVerticalGroupAttachment(PartsListBuilder.PartsListVerticalGroupLeaderAttachment) - Method in interface nxopen.annotations.PartsListBuilder

License requirements: drafting ("DRAFTING")
.

setVerticalGrowthDirection(DrawingRegionBuilder.RegionVerticalGrowthDirection) - Method in interface nxopen.drawings.DrawingRegionBuilder

License requirements: nx_drawing_auto ("NX Drawing Automation")
.

setVerticalInferredMarginLocation(Point3d) - Method in interface nxopen.annotations.BaseOrdinateDimensionBuilder

License requirements: drafting ("DRAFTING")
.

setVerticalLeaderAttachment(CalloutGroupBuilder.VerticalGroupLeaderAttachment) - Method in interface nxopen.annotations.CalloutGroupBuilder

License requirements: drafting ("DRAFTING")
.

setVerticalNote(Tag, boolean) - Method in interface nxopen.uf.UFDrf

Refer to UF_DRF_set_vertical_note for documentation.

setVerticalSize(double) - Method in interface nxopen.drawings.BordersAndZonesBuilder

Deprecated.

Deprecated in NX10.0.0. Use SheetZoneSettingsBuilder.verticalSize() instead.

setVerticalSize(double) - Method in interface nxopen.drawings.SheetZoneSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setVerticalText(boolean) - Method in interface nxopen.annotations.DraftingNoteBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setVideoFile(String) - Method in interface nxopen.cam.WorkInstructionBuilder

License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.

setView(View) - Method in interface nxopen.annotations.BoundaryBuilder

The boundary view
License requirements: None.

setView(ModelingView) - Method in interface nxopen.display.DynamicSectionBuilder

License requirements: None.

setView() - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder

Sets the current view normal to the main plane, which is the base plane to construct the primary sketch in the template part.

setView(int, int, ModelingView) - Method in interface nxopen.LayoutDefinition

Sets the ModelingView at specified position in layout.

setViewAnchor(Tag, Tag) - Method in interface nxopen.uf.UFDraw

Refer to UF_DRAW_set_view_anchor for documentation.

setViewAngle(Tag, double) - Method in interface nxopen.uf.UFDraw

Refer to UF_DRAW_set_view_angle for documentation.

setViewBoundary(ViewCreationWizardBuilder.ViewBoundaryOption) - Method in interface nxopen.drawings.ViewCreationWizardBuilder

License requirements: drafting ("DRAFTING")
.

setViewBoundaryColor(NXColor) - Method in interface nxopen.drawings.ViewStyleDetailBuilder

License requirements: drafting ("DRAFTING")
.

setViewBoundaryColor(NXColor) - Method in interface nxopen.preferences.DetailViewPreferences

License requirements: drafting ("DRAFTING")
.

setViewBoundaryFont(Font) - Method in interface nxopen.drawings.ViewStyleDetailBuilder

License requirements: drafting ("DRAFTING")
.

setViewBoundaryFont(Font) - Method in interface nxopen.preferences.DetailViewPreferences

License requirements: drafting ("DRAFTING")
.

setViewBoundaryWidth(Width) - Method in interface nxopen.drawings.ViewStyleDetailBuilder

License requirements: drafting ("DRAFTING")
.

setViewBoundaryWidth(Width) - Method in interface nxopen.preferences.DetailViewPreferences

License requirements: drafting ("DRAFTING")
.

setViewCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use TrackDrawingChangesReportFilterBuilder.setReportFilterStatus(nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter, boolean) instead.

setViewDirection(Vector3d) - Method in interface nxopen.facet.SnipFacetBodyBuilder

License requirements: None.

setViewDirection(Vector3d) - Method in interface nxopen.features.subdivision.SelectCageObjectData

Sets the view direction.

setViewDisplay(Tag, UFDraw.ViewPrfs) - Method in interface nxopen.uf.UFDraw

Refer to UF_DRAW_set_view_display for documentation.

setViewEditMode(boolean) - Method in interface nxopen.DxfdwgCreator

License requirements: None.

setViewedPartitionScheme(PartitionScheme) - Method in interface nxopen.assemblies.SubsetBuilder

License requirements: nx_4gd_integration ("4th Generation Design")
.

setViewExplosion(Tag, Tag) - Method in interface nxopen.uf.UFAssem

Refer to UF_ASSEM_set_view_explosion for documentation.

setViewFitToStage(boolean) - Method in interface nxopen.display.EnvironmentBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setViewGeometryToSketch(boolean) - Method in interface nxopen.ASCImporter

License requirements: nx_layout ("NX Layout")
.

setViewImageAfterSnapshotting(boolean) - Method in interface nxopen.report.ReportPreference

License requirements: None.

setViewIndex(int) - Method in interface nxopen.cae.GraphFromResultProbeBuilder

The view index will be set
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setViewIndexForPostView(int) - Method in interface nxopen.cae.ResultsReductionBuilder

Set view index where postview will be created
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setViewLabel(boolean) - Method in interface nxopen.drawings.GeneralViewStyle

Sets the display of view label.

setViewLabel(boolean) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder

License requirements: drafting ("DRAFTING")
.

setViewLabelOption(ViewLabelTypes) - Method in interface nxopen.drawings.ViewDetailLabelBuilder

License requirements: drafting ("DRAFTING")
.

setViewLabelOption(ViewLabelTypes) - Method in interface nxopen.drawings.ViewLabelBuilder

License requirements: drafting ("DRAFTING")
.

setViewLabelOption(ViewLabelTypes) - Method in interface nxopen.drawings.ViewSectionLabelBuilder

License requirements: drafting ("DRAFTING")
.

setViewLabelParms(Tag, UFDraw.ViewLabelParms) - Method in interface nxopen.uf.UFDraw

Refer to UF_DRAW_set_view_label_parms for documentation.

setViewLabels(boolean) - Method in interface nxopen.drawings.ViewCreationWizardBuilder

License requirements: drafting ("DRAFTING")
.

setViewLight(Tag, UFView.Lighting) - Method in interface nxopen.uf.UFView

Refer to UF_VIEW_set_view_light for documentation.

setViewList(String) - Method in interface nxopen.DxfdwgCreator

License requirements: None.

setViewList(String) - Method in interface nxopen.IgesCreator

License requirements: None.

setViewLocation(Point) - Method in interface nxopen.tooling.AssemblyDrawingBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setViewMatrix(String, int, Tag, double[]) - Method in interface nxopen.uf.UFView

Refer to UF_VIEW_set_view_matrix for documentation.

setViewName(String) - Method in interface nxopen.annotations.LightweightSectionBuilder

License requirements: geometric_tol ("GDT")
.

setViewName(String) - Method in interface nxopen.NXTo2dCreator

License requirements: None.

setViewNameFormat(CuttingPlaneSymbolBuilder.ViewNameFormatOption) - Method in interface nxopen.annotations.CuttingPlaneSymbolBuilder

License requirements: geometric_tol ("GDT")
.

setViewOption(AssemblyDrawingBuilder.ViewOptionValue) - Method in interface nxopen.tooling.AssemblyDrawingBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setViewOrientation(Matrix3x3) - Method in interface nxopen.cae.xyplot.WallDisplayStyles3D

License requirements: nx_ftk ("NX Advanced Graphing")
.

setViewOrigin(Point3d) - Method in interface nxopen.drawings.ViewStylePerspectiveBuilder

License requirements: drafting ("DRAFTING")
.

setViewParmScale(Tag, Tag) - Method in interface nxopen.uf.UFDraw

Refer to UF_DRAW_set_view_parm_scale for documentation.

setViewPort(int) - Method in interface nxopen.motion.LoadTransferControl

Sets view port
License requirements: mechanisms ("MECHANISMS")
.

setViewPortIndex(int) - Method in interface nxopen.cae.PostScenarioParameters

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setViewPortIndex(int) - Method in interface nxopen.cae.xyplot.BasePlotParameters

License requirements: nx_ftk ("NX Advanced Graphing")
.

setViewQuality(GeneralViewQualityOption) - Method in interface nxopen.drawings.GeneralViewStyle

Sets the view quality, that provides an alternative way to display model geometry in a drawing view.

setViewQuality(GeneralViewQualityOption) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder

License requirements: drafting ("DRAFTING")
.

setViewQuality(GeneralViewQualityOption) - Method in interface nxopen.preferences.GeneralViewPreferences

Sets the view quality that provides alternative ways to display geometry in a drawing member view.

setViewRepresentation(GeneralViewRepresentationOption) - Method in interface nxopen.drawings.GeneralViewStyle

Sets the view representation enum on the GENERAL tab of the View Style Dialog
License requirements: drafting ("DRAFTING")
.

setViewRepresentation(ViewCreationWizardBuilder.ViewRepresentations) - Method in interface nxopen.drawings.ViewCreationWizardBuilder

License requirements: drafting ("DRAFTING")
.

setViewRepresentation(GeneralViewRepresentationOption) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder

License requirements: drafting ("DRAFTING")
.

setViewRepresentation(GeneralViewRepresentationOption) - Method in interface nxopen.preferences.GeneralViewPreferences

License requirements: drafting ("DRAFTING")
.

setViews(View[]) - Method in interface nxopen.annotations.Annotation

Sets the views that the PMI display instance object is displayed in.

setViewScale(Tag, double) - Method in interface nxopen.uf.UFDraw

Refer to UF_DRAW_set_view_scale for documentation.

setViewsPerSheet(SectionDrawingBuilder.ViewsPerSheetOptions) - Method in interface nxopen.features.shipdesign.SectionDrawingBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setViewStatus(Tag, UFDraw.ViewStatus) - Method in interface nxopen.uf.UFDraw

Refer to UF_DRAW_set_view_status for documentation.

setViewString(String) - Method in interface nxopen.cam.InspectionLinkPmiBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setViewStyle(PartDrafting.ViewStyleType) - Method in interface nxopen.preferences.PartDrafting

Sets the drafting view style type for preview when placing the view
License requirements: None.

setViewThdAppPitch(Tag, double) - Method in interface nxopen.uf.UFDraw

Refer to UF_DRAW_set_view_thd_app_pitch for documentation.

setViewThdMeth(Tag, int) - Method in interface nxopen.uf.UFDraw

Refer to UF_DRAW_set_view_thd_meth for documentation.

setViewTracking(boolean) - Method in interface nxopen.preferences.PartDrafting

Sets the flag indicating whether to track a drafting view during preview when placing the view.

setViewType(StandardViewsBuilder.View) - Method in interface nxopen.drawings.StandardViewsBuilder

License requirements: nx_layout ("NX Layout")
.

setViewType(SectionDrawingBuilder.ViewTypeOptions) - Method in interface nxopen.features.shipdesign.SectionDrawingBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setViewUnfolded(boolean) - Method in interface nxopen.drawings.SectionViewBuilder

Deprecated.

Deprecated in NX10.0.0. Use SectionViewBuilder.setCreateFolded(boolean)

setViewValidationResults(boolean) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setViolationAction(SessionMeasureRequirements.ActionOnViolation) - Method in interface nxopen.preferences.SessionMeasureRequirements

License requirements: None.

setViolationLocation(int, DesignRuleViolationLocation) - Method in interface nxopen.routing.DesignRuleViolation

Deprecated.

Deprecated in NX8.0.3. Use DesignRuleViolation.addViolationLocations(nxopen.routing.DesignRuleViolationLocation[]) instead.

setViolationOverride(String, String, int) - Method in interface nxopen.routing.DesignRuleViolation

Sets the violation override
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setVioLongDesc(Tag, String) - Method in interface nxopen.uf.UFRule

Deprecated.

The equivalent Open C method has retired

setVioObjects(Tag, int, Tag[]) - Method in interface nxopen.uf.UFRule

Deprecated.

The equivalent Open C method has retired

setVioOverride(Tag, Tag) - Method in interface nxopen.uf.UFRule

Deprecated.

The equivalent Open C method has retired

setVioShortDesc(Tag, String) - Method in interface nxopen.uf.UFRule

Deprecated.

The equivalent Open C method has retired

setVioTimeStamp(Tag, int) - Method in interface nxopen.uf.UFRule

Deprecated.

The equivalent Open C method has retired

setVirtualIntersection(boolean) - Method in interface nxopen.drawings.VirtualIntersectionsViewStyle

Sets the status of virtual intersection.

setVirtualIntersection(boolean) - Method in interface nxopen.preferences.VirtualIntersectionsViewPreferences

Sets the status of virtual intersection.

setVirtualInterSectionColor(NXColor) - Method in interface nxopen.drawings.CustomViewSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setVirtualInterSectionFont(CustomViewSettingsBuilder.Font) - Method in interface nxopen.drawings.CustomViewSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setVirtualIntersections(boolean) - Method in interface nxopen.drawings.ViewStyleVirtualIntersectionsBuilder

License requirements: drafting ("DRAFTING")
.

setVirtualInterSectionWidth(CustomViewSettingsBuilder.Width) - Method in interface nxopen.drawings.CustomViewSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setVirtualPorts(String[]) - Method in interface nxopen.routing.MultiPort

Sets the virtual ports that are associated with this MultiPort
License requirements: routing_base ("Routing Basic")

Created in NX4.0.0

setVirtualReferenceId(String) - Method in interface nxopen.routing.RunItemsBuilder

License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setViscous(double) - Method in interface nxopen.cae.responsesimulation.NormalMode

License requirements: nx_response_anlys ("NX Response Analysis")
.

setViscous(double) - Method in interface nxopen.motion.NormalModeProperty

License requirements: mechanisms ("MECHANISMS")
.

setViscousDampingFactor(double) - Method in interface nxopen.cae.LaminateModeProperty

Sets the viscous damping factor
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setVisibility(boolean) - Method in interface nxopen.cae.xyplot.TextBoxStyleSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setVisibility(boolean) - Method in interface nxopen.ExpressionGroup

Sets an expression group's visibility
License requirements: None.

setVisibility(SmartObject.VisibilityOption) - Method in interface nxopen.SmartObject

Sets the visibility.

setVisibility(boolean) - Method in interface nxopen.uistyler.ButtonLayout

Sets the visibility
License requirements: None.

setVisibility(boolean) - Method in interface nxopen.uistyler.CollapsibleGroup

License requirements: None.

setVisibility(boolean) - Method in interface nxopen.uistyler.ColorTool

Sets the visibility
License requirements: None.

setVisibility(boolean) - Method in interface nxopen.uistyler.GroupBox

Sets the visibility
License requirements: None.

setVisibility(boolean) - Method in interface nxopen.uistyler.IntegerItem

Sets the visibility of the dialog item.

setVisibility(boolean) - Method in interface nxopen.uistyler.IntegerScale

Sets the visibility of the dialog item.

setVisibility(boolean) - Method in interface nxopen.uistyler.LabelItem

Sets the visibility of the dialog item
License requirements: None.

setVisibility(boolean) - Method in interface nxopen.uistyler.MultiSelectList

Sets the visibility
License requirements: None.

setVisibility(boolean) - Method in interface nxopen.uistyler.MultiTextBox

Sets the visibility of the dialog item
License requirements: None.

setVisibility(boolean) - Method in interface nxopen.uistyler.OptionMenu

Sets the visibility
License requirements: None.

setVisibility(boolean) - Method in interface nxopen.uistyler.OptionToggle

Sets the visibility
License requirements: None.

setVisibility(boolean) - Method in interface nxopen.uistyler.PropertyPage

Sets the visibility of the dialog item.

setVisibility(boolean) - Method in interface nxopen.uistyler.PushButton

Sets the visibility of dialog.

setVisibility(boolean) - Method in interface nxopen.uistyler.RadioBox

Sets the visibility
License requirements: None.

setVisibility(boolean) - Method in interface nxopen.uistyler.RealItem

Sets the visibility
License requirements: None.

setVisibility(boolean) - Method in interface nxopen.uistyler.RealScale

Sets the visibility
License requirements: None.

setVisibility(boolean) - Method in interface nxopen.uistyler.RowColumn

Sets the visibility
License requirements: None.

setVisibility(boolean) - Method in interface nxopen.uistyler.ScrolledWindow

Sets
License requirements: None.

setVisibility(boolean) - Method in interface nxopen.uistyler.SelectionBox

Sets the visibility of the selection box
License requirements: None.

setVisibility(boolean) - Method in interface nxopen.uistyler.Separator

Sets the visibility of the separator
License requirements: None.

setVisibility(boolean) - Method in interface nxopen.uistyler.SingleSelectList

Sets the visibility of the single select list
License requirements: None.

setVisibility(boolean) - Method in interface nxopen.uistyler.StringItem

Sets the visibility of the dialog item
License requirements: None.

setVisibility(boolean) - Method in interface nxopen.uistyler.TabControl

Sets the visibility of the dialog item
License requirements: None.

setVisibility(boolean) - Method in interface nxopen.uistyler.Toggle

Sets the visibility of the toggle
License requirements: None.

setVisibility(boolean) - Method in interface nxopen.uistyler.ToolPalette

Sets the visibility of the dialog item
License requirements: None.

setVisibility(boolean) - Method in interface nxopen.uistyler.WideString

Sets the visibility of the wide string
License requirements: None.

setVisibility(boolean) - Method in interface nxopen.WCS

License requirements: None.

setVisibilityCoordinates(boolean) - Method in interface nxopen.geometricanalysis.LocalRadiusAnalysisBuilder

License requirements: None.

setVisibilityMaxRadius(boolean) - Method in interface nxopen.geometricanalysis.LocalRadiusAnalysisBuilder

License requirements: None.

setVisibilityMinMaxRadiusTangent(boolean) - Method in interface nxopen.geometricanalysis.LocalRadiusAnalysisBuilder

License requirements: None.

setVisibilityMinRadius(boolean) - Method in interface nxopen.geometricanalysis.LocalRadiusAnalysisBuilder

License requirements: None.

setVisibilityOfConstraints(Sketch.ConstraintVisibility) - Method in interface nxopen.Sketch

Deprecated.

Deprecated in NX8.5.0. Use SessionSketch.setDisplayConstraintSymbols(boolean) instead.

setVisibilityOption(Tag, UFSo.VisibilityOption) - Method in interface nxopen.uf.UFSo

Refer to UF_SO_set_visibility_option for documentation.

setVisibilityRadius(boolean) - Method in interface nxopen.geometricanalysis.LocalRadiusAnalysisBuilder

License requirements: None.

setVisibilityURadius(boolean) - Method in interface nxopen.geometricanalysis.LocalRadiusAnalysisBuilder

License requirements: None.

setVisibilityUV(boolean) - Method in interface nxopen.geometricanalysis.LocalRadiusAnalysisBuilder

License requirements: None.

setVisibilityUVTangent(boolean) - Method in interface nxopen.geometricanalysis.LocalRadiusAnalysisBuilder

License requirements: None.

setVisibilityVRadius(boolean) - Method in interface nxopen.geometricanalysis.LocalRadiusAnalysisBuilder

License requirements: None.

setVisible(boolean) - Method in interface nxopen.markup.MarkupObject

License requirements: None.

setVisibleColor(int) - Method in interface nxopen.drawings.TraceLinesViewStyle

Sets the visible color.

setVisibleColor(NXColor) - Method in interface nxopen.drawings.ViewStyleShipbuildingLinesBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setVisibleColor(NXColor) - Method in interface nxopen.drawings.ViewStyleTraceLinesBuilder

License requirements: drafting ("DRAFTING")
.

setVisibleColor(NXColor) - Method in interface nxopen.drawings.ViewStyleVisibleLinesBuilder

License requirements: drafting ("DRAFTING")
.

setVisibleColor(int) - Method in interface nxopen.drawings.VisibleLinesViewStyle

Sets the visible color.

setVisibleColor(NXColor) - Method in interface nxopen.features.vehicledesign.AllAroundVisionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setVisibleColor(int) - Method in interface nxopen.preferences.TraceLinesViewPreferences

Sets the visible color.

setVisibleColor(int) - Method in interface nxopen.preferences.VisibleLinesViewPreferences

Sets the visible color.

setVisibleConstraintsRule(ConstraintDisplayBuilder.VisibleConstraintsRuleOptions) - Method in interface nxopen.assemblies.ConstraintDisplayBuilder

License requirements: assemblies ("ASSEMBLIES MODULE")
.

setVisibleFont(Font) - Method in interface nxopen.drawings.TraceLinesViewStyle

Sets the visible font
License requirements: drafting ("DRAFTING")
.

setVisibleFont(Font) - Method in interface nxopen.drawings.ViewStyleShipbuildingLinesBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setVisibleFont(Font) - Method in interface nxopen.drawings.ViewStyleTraceLinesBuilder

License requirements: drafting ("DRAFTING")
.

setVisibleFont(Font) - Method in interface nxopen.drawings.ViewStyleVisibleLinesBuilder

License requirements: drafting ("DRAFTING")
.

setVisibleFont(Font) - Method in interface nxopen.drawings.VisibleLinesViewStyle

Sets the visible font.

setVisibleFont(Font) - Method in interface nxopen.preferences.TraceLinesViewPreferences

Sets the visible font
License requirements: drafting ("DRAFTING")
.

setVisibleFont(Font) - Method in interface nxopen.preferences.VisibleLinesViewPreferences

Sets the visible font.

setVisibleManipulatorHandles(int) - Method in interface nxopen.blockstyler.SpecifyOrientation

License requirements: None.

setVisibleWidth(Width) - Method in interface nxopen.drawings.TraceLinesViewStyle

Sets the visible width
License requirements: drafting ("DRAFTING")
.

setVisibleWidth(Width) - Method in interface nxopen.drawings.ViewStyleShipbuildingLinesBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setVisibleWidth(Width) - Method in interface nxopen.drawings.ViewStyleTraceLinesBuilder

License requirements: drafting ("DRAFTING")
.

setVisibleWidth(Width) - Method in interface nxopen.drawings.ViewStyleVisibleLinesBuilder

License requirements: drafting ("DRAFTING")
.

setVisibleWidth(Width) - Method in interface nxopen.drawings.VisibleLinesViewStyle

Sets the visible width.

setVisibleWidth(Width) - Method in interface nxopen.preferences.TraceLinesViewPreferences

Sets the visible width
License requirements: drafting ("DRAFTING")
.

setVisibleWidth(Width) - Method in interface nxopen.preferences.VisibleLinesViewPreferences

Sets the visible width.

setVisibleWireframeColor(NXColor) - Method in interface nxopen.drawings.ViewStyleShadingBuilder

License requirements: drafting ("DRAFTING")
.

setVisionType(VisionPlaneBuilder.CustomVisionAngle) - Method in interface nxopen.features.vehicledesign.VisionPlaneBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setVisionType(WindshieldDatumBuilder.CustomVisionAngle) - Method in interface nxopen.features.vehicledesign.WindshieldDatumBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setVisualization(PostScenarioVisualizationDefinition) - Method in interface nxopen.cae.PostScenarioBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setVisualization(BumperPendulumBuilder.VisualizationType) - Method in interface nxopen.features.vehicledesign.BumperPendulumBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setVisualization(DynamicCurbBuilder.VisualizationType) - Method in interface nxopen.features.vehicledesign.DynamicCurbBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setVisualization(GroundClearanceBuilder.VisualizationTypes) - Method in interface nxopen.features.vehicledesign.GroundClearanceBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setVisualization(InnerAngleBuilder.VisualizationType) - Method in interface nxopen.features.vehicledesign.InnerAngleBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setVisualization(OilPanBuilder.VisualizationType) - Method in interface nxopen.features.vehicledesign.OilPanBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setVisualization(SlopeBuilder.VisualizationType) - Method in interface nxopen.features.vehicledesign.SlopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setVisualization(StaticCurbBuilder.VisualizationType) - Method in interface nxopen.features.vehicledesign.StaticCurbBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setVisualization(IsvControlPanelBuilder.VisualizationType) - Method in interface nxopen.sim.IsvControlPanelBuilder

Sets the visualization
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setVisualization(Tag, UFView.Visualization) - Method in interface nxopen.uf.UFView

Refer to UF_VIEW_set_visualization for documentation.

setVisualizationData(boolean) - Method in interface nxopen.SaveOptions

Sets the option indicating whether to generate Teamcenter Visualization .jt files when a part is saved
License requirements: None.

setVisualize2dTool1Color(NXColor) - Method in interface nxopen.cam.Preferences

Deprecated.

Deprecated in NX9.0.0. Use CAM.Preferences#setVisualizeIpwDmrColor1 instead.

setVisualize2dTool2Color(NXColor) - Method in interface nxopen.cam.Preferences

Deprecated.

Deprecated in NX9.0.0. Use CAM.Preferences#setVisualizeIpwDmrColor2 instead.

setVisualize2dTool3Color(NXColor) - Method in interface nxopen.cam.Preferences

Deprecated.

Deprecated in NX9.0.0. Use CAM.Preferences#setVisualizeIpwDmrColor3 instead.

setVisualize2dTool4Color(NXColor) - Method in interface nxopen.cam.Preferences

Deprecated.

Deprecated in NX9.0.0. Use CAM.Preferences#setVisualizeIpwDmrColor4 instead.

setVisualize2dTool5Color(NXColor) - Method in interface nxopen.cam.Preferences

Deprecated.

Deprecated in NX9.0.0. Use CAM.Preferences#setVisualizeIpwDmrColor5 instead.

setVisualizeAnimationAccuracy(Preferences.AnimationAccuracyTypes) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setVisualizeAutoBlockColor(NXColor) - Method in interface nxopen.cam.Preferences

Deprecated.

Deprecated in NX8.5.0. Use CAM.Preferences#setBlankColor instead.

setVisualizeBackgroundColor(NXColor) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setVisualizeChordalTolerance(double) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setVisualizeCollisionsColor(NXColor) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setVisualizeDepth(boolean) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setVisualizeDraft(boolean) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setVisualizeDraftOptions(DieEngDefineProductOrientationBuilder.ViewDraftOptions) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setVisualizeDynamicToolAxis(boolean) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setVisualizeExcessMaterialColor(NXColor) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setVisualizeGougesColor(NXColor) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setVisualizeIpwColor(NXColor) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setVisualizeIpwDmrColor1(NXColor) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setVisualizeIpwDmrColor10(NXColor) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setVisualizeIpwDmrColor2(NXColor) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setVisualizeIpwDmrColor3(NXColor) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setVisualizeIpwDmrColor4(NXColor) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setVisualizeIpwDmrColor5(NXColor) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setVisualizeIpwDmrColor6(NXColor) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setVisualizeIpwDmrColor7(NXColor) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setVisualizeIpwDmrColor8(NXColor) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setVisualizeIpwDmrColor9(NXColor) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setVisualizeIpwDmrColoringMode(Preferences.IpwDmrColoringTypes) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setVisualizeIpwTranslucency(int) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setVisualizeSafeToolColor(NXColor) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setVisualizeTemporaryContainmentCurveColor(NXColor) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setVisualizeToolAxisTiltTolerance(double) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setVisualizeToolDisplayColor(NXColor) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setVisualizeToolEditAndDisplay(boolean) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setVisualizeToolHolderColor(NXColor) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setVisualizeToolInsertOrFluteColor(NXColor) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setVisualizeToolShankColor(NXColor) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setVisualizeToolTranslucency(int) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setVisualizeZone(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setVoltageConstant(double) - Method in interface nxopen.motion.PMDCMotorBuilder

Deprecated.

Deprecated in NX8.5.0. Obtion the exression using PMDCMotorBuilder.voltageConstantExpression() to query or edit it.

setVolume(String) - Method in interface nxopen.pdm.PersistentSettings

License requirements: None.

setVolume(String) - Method in interface nxopen.pdm.SessionSettings

License requirements: None.

setVolumeDefinitionOption(TBSTopologyControllerOptimizationParameters.VolumeDefinitionMethod) - Method in interface nxopen.cae.optimization.TBSTopologyControllerOptimizationParameters

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setVolumes(double[]) - Method in interface nxopen.userdefinedobjects.UserDefinedObject

Sets all of the volumes stored with this UDO
License requirements: None.

setVolumes(int, int, double[]) - Method in interface nxopen.userdefinedobjects.UserDefinedObject

Replaces the volumes stored with this UDO in the specified range with a new array of volumes
License requirements: None.

setVolumeThreshold(double) - Method in interface nxopen.cam.MinCutVolume

License requirements: cam_base ("CAM BASE")
.

setVonMisesStress(boolean) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder

License requirements: nx_adv_durability ("NX Advanced Durability")
.

setVparameter1(double) - Method in interface nxopen.weld.FilletBuilder

Deprecated.

Deprecated in NX10.0.0. Removed with no replacement.

setVparameter1(double) - Method in interface nxopen.weld.WeldGrooveBuilder

License requirements: ugweld ("UG WELD")
.

setVparameter2(double) - Method in interface nxopen.weld.FilletBuilder

Deprecated.

Deprecated in NX10.0.0. Removed with no replacement.

setVparameter2(double) - Method in interface nxopen.weld.WeldGrooveBuilder

License requirements: ugweld ("UG WELD")
.

setVPatches(int) - Method in interface nxopen.features.RapidSurfaceBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setVPatches(int) - Method in interface nxopen.geometricutilities.DegreesAndSegmentsOrPatchesBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setVScale(double) - Method in interface nxopen.display.IrayPlusSimpleMaterialEditorBuilder

License requirements: studio_render ("UG STUDIO RENDER")
.

setVStart(double) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setVStartDeg(double) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setVStartDist(double) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setVStartEndMode(InspectionSurfaceFeatureBuilder.StartEndModeType) - Method in interface nxopen.cam.InspectionSurfaceFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setVStartMode(InspectionMethodBuilder.UVModeTypes) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setVStartSweep(double) - Method in interface nxopen.cam.InspectionMethodBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setWadBoundaryValue(PedestrianProtectionBuilder.Wad) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setWadEndValue(PedestrianProtectionBuilder.Wad) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setWadOutputColor(NXColor) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setWadOutputFont(PedestrianProtectionBuilder.Font) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setWadOutputLayer(int) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setWadOutputWidth(PedestrianProtectionBuilder.Width) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setWadStartValue(PedestrianProtectionBuilder.Wad) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setWall(boolean) - Method in interface nxopen.cam.DmCmMultiplePassesCiBuilder

License requirements: cam_base ("CAM BASE")
.

setWallACreate(boolean) - Method in interface nxopen.die.HeelpostBuilder

License requirements: ug_die_design ("Die Design")
.

setWallARelief(boolean) - Method in interface nxopen.die.HeelpostBuilder

License requirements: ug_die_design ("Die Design")
.

setWallBCreate(boolean) - Method in interface nxopen.die.HeelpostBuilder

License requirements: ug_die_design ("Die Design")
.

setWallBRelief(boolean) - Method in interface nxopen.die.HeelpostBuilder

License requirements: ug_die_design ("Die Design")
.

setWallCCreate(boolean) - Method in interface nxopen.die.HeelpostBuilder

License requirements: ug_die_design ("Die Design")
.

setWallColor(NXColor) - Method in interface nxopen.cam.Preferences

License requirements: cam_base ("CAM BASE")
.

setWallCRelief(boolean) - Method in interface nxopen.die.HeelpostBuilder

License requirements: ug_die_design ("Die Design")
.

setWallDCreate(boolean) - Method in interface nxopen.die.HeelpostBuilder

License requirements: ug_die_design ("Die Design")
.

setWallDRelief(boolean) - Method in interface nxopen.die.HeelpostBuilder

License requirements: ug_die_design ("Die Design")
.

setWallFaces(ScCollector) - Method in interface nxopen.cam.ManualFeatureBuilder

License requirements: None.

setWallFaces(NXObject[]) - Method in interface nxopen.cam.Splitter

Set the wall faces
License requirements: cam_base ("CAM BASE")
.

setWallFaces(ScCollector) - Method in interface nxopen.features.AnalyzePocketBuilder

License requirements: None.

setWallFaces(ScCollector) - Method in interface nxopen.features.BlendPocketBuilder

License requirements: None.

setWallInList(Stage.WallType, Wall) - Method in interface nxopen.display.Stage

Sets a wall builder in the array at the given index
License requirements: None.

setWallMaterialTextureType(Wall.MaterialTextureType) - Method in interface nxopen.display.Wall

License requirements: None.

setWallMaterialType(Wall.MaterialType) - Method in interface nxopen.display.Wall

Deprecated.

Deprecated in NX10.0.0. Use Wall.wallMaterialTextureType() and Wall.setWallMaterialTextureType(nxopen.display.Wall.MaterialTextureType) instead.

setWallSelection(Preferences.WallSelectionTypes) - Method in interface nxopen.cam.Preferences

Deprecated.

Deprecated in NX8.0.0. Use CAM.Preferences#getSelection and CAM.Preferences#setSelection instead.

setWallStepMethod(DmCmMultiplePassesCiBuilder.WallStepMethodType) - Method in interface nxopen.cam.DmCmMultiplePassesCiBuilder

License requirements: cam_base ("CAM BASE")
.

setWallStock(double) - Method in interface nxopen.cam.CutVolume

License requirements: cam_base ("CAM BASE")
.

setWallThickness(double) - Method in interface nxopen.die.DrawDiePunchSectionBuilder

License requirements: ug_die_design ("Die Design")
.

setWallThickness(double) - Method in interface nxopen.tooling.DieDesDrawDieBuilder

License requirements: ug_die_design ("Die Design")
.

setWallThickness(double) - Method in interface nxopen.tooling.DieDesDrawPunchBuilder

License requirements: ug_die_design ("Die Design")
.

setWallThickness(double) - Method in interface nxopen.tooling.DieDesignLowerBinderBuilder

License requirements: ug_die_design ("Die Design")
.

setWarningElementsColor(NXColor) - Method in interface nxopen.cae.modelcheck.ElementQualityCheckBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setWarningShowIsocline(boolean) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setWarningValue(double) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setWarnOnDelete(boolean) - Method in interface nxopen.preferences.SessionAssemblies

Sets the warn on delete option
License requirements: None.

setWarnOnDragDrop(boolean) - Method in interface nxopen.preferences.SessionAssemblies

Sets the warn on drag and drop
License requirements: None.

setWarnUserFlag(boolean) - Method in interface nxopen.userdefinedobjects.UserDefinedClass

Sets the warn user flag.

setWarpToggle(boolean) - Method in interface nxopen.cae.ElementSplitBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setWarpValue(double) - Method in interface nxopen.cae.ElementSplitBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setWashout1(boolean) - Method in interface nxopen.features.AestheticFaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setWashout2(boolean) - Method in interface nxopen.features.AestheticFaceBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

setWaterline(boolean) - Method in interface nxopen.annotations.BaseFrameBarBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setWaterlineLabelColor(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setWaterlineLabelFont(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setWaterlineLabelItalicized(boolean) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setWaterlineLabelWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setWaterlineTicColor(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setWaterlineTicDisplay(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setWaterlineTicFont(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setWaterlineTicLength(double) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setWaterlineTicWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences

License requirements: nx_ship_drafting ("Ship Drafting")
.

setWatermark(String) - Method in interface nxopen.PrintPDFBuilder

License requirements: None.

setWaterStopOffsetOption(AlongGuideCutBuilder.WaterStopOffsetMethod) - Method in interface nxopen.features.shipdesign.AlongGuideCutBuilder

License requirements: nx_ship_detail ("Ship Detail Design")
.

setWaveDatumBuilder(WaveDatumBuilder) - Method in interface nxopen.features.WaveLinkBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setWavePointBuilder(WavePointBuilder) - Method in interface nxopen.features.WaveLinkBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setWaveRoutingBuilder(WaveRoutingBuilder) - Method in interface nxopen.features.WaveLinkBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setWaveSetting(ObjectBuilder.Wave) - Method in interface nxopen.assemblies.productinterface.ObjectBuilder

License requirements: None.

setWaveSketchBuilder(WaveSketchBuilder) - Method in interface nxopen.features.WaveLinkBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setWavinessText(String) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder

License requirements: None.

setWavinessTextType(SearchModelViewBuilder.TextComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder

License requirements: None.

setWcs(Tag) - Method in interface nxopen.uf.UFCsys

Refer to UF_CSYS_set_wcs for documentation.

setWcsAtCsys() - Method in interface nxopen.features.DatumCsys

Sets WCS at CSYS.

setWCSCoordinates(boolean) - Method in interface nxopen.blockstyler.SpecifyOrientation

License requirements: None.

setWCSDirection(MovePoleBuilder.WCSDirectionType) - Method in interface nxopen.geometricutilities.MovePoleBuilder

License requirements: None.

setWcsDisplay(int) - Method in interface nxopen.uf.UFCsys

Refer to UF_CSYS_set_wcs_display for documentation.

setWCSForSpecialPiercingInsert(boolean) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder

Set work coordinate system for special piercing insert
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setWcsOffset(double) - Method in interface nxopen.cam.TurnOrientWcs

License requirements: None.

setWCSOption(PolylineBuilder.WCSOptionType) - Method in interface nxopen.features.PolylineBuilder

License requirements: features_modeling ("FEATURES MODELING")
.

setWCSOption(StudioSplineBuilderEx.WCSOptionType) - Method in interface nxopen.features.StudioSplineBuilderEx

License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

setWCSOption(TransformCageData.WCSOptionType) - Method in interface nxopen.features.subdivision.TransformCageData

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setWCSOption(CurveShapingBuilder.WCSOptionType) - Method in interface nxopen.geometricutilities.CurveShapingBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setWcsOrientOption(boolean) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setWcstype(MoldCsysBuilder.Wcsposition) - Method in interface nxopen.tooling.MoldCsysBuilder

License requirements: None.

setWcsVisibility(boolean) - Method in interface nxopen.View

License requirements: None.

setWcsWorkPlaneEmphasis(boolean) - Method in interface nxopen.preferences.SessionVisualizationEmphasis

Sets the setting that controls whether or not objects on the WCS work plane are emphasized.

setWearPlateLength(String) - Method in interface nxopen.die.WearPlateLocChildBuilder

License requirements: ug_die_design ("Die Design")
.

setWearPlateLength(String) - Method in interface nxopen.die.WearPlateLocParentBuilder

License requirements: ug_die_design ("Die Design")
.

setWearPlateWidth(String) - Method in interface nxopen.die.WearPlateLocChildBuilder

License requirements: ug_die_design ("Die Design")
.

setWearPlateWidth(String) - Method in interface nxopen.die.WearPlateLocParentBuilder

License requirements: ug_die_design ("Die Design")
.

setWebDistance(double) - Method in interface nxopen.tooling.BlankNestingBuilder

License requirements: None.

setWebTaperType1(BendTaperBuilder.WebTaperType) - Method in interface nxopen.features.sheetmetal.BendTaperBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setWebTaperType2(BendTaperBuilder.WebTaperType) - Method in interface nxopen.features.sheetmetal.BendTaperBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

setWeight(double) - Method in interface nxopen.cae.ModelUpdateDesignVariable

Sets weight
License requirements: nx_correl_update ("FE Model Update")
.

setWeight(double) - Method in interface nxopen.cae.optimization.TBSSingleObjective

License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

setWeight(TransientText.TextSize) - Method in interface nxopen.cae.xyplot.TextStyleSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setWeightData(HumanData.WeightType, double, HumanData.WeightUnitType) - Method in interface nxopen.features.HumanBuilder

Sets human weight data
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

setWeightPercent(int) - Method in interface nxopen.features.subdivision.SubdivisionSetWeightBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setWeightRating(String) - Method in interface nxopen.features.shipdesign.PlateStockBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

setWelcomeMode(boolean) - Method in interface nxopen.preferences.LoadDraftingStandardBuilder

License requirements: None.

setWeldAlongContour(LineWeldBuilder.WeldSymbolWeldAlongContourType) - Method in interface nxopen.annotations.LineWeldBuilder

Sets the weld along contour option
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setWeldArcGridLineEndCapDisp(double) - Method in interface nxopen.weld.WeldPreferenceBuilder

License requirements: ugweld ("UG WELD")
.

setWeldArcGridLineTopDisp(double) - Method in interface nxopen.weld.WeldPreferenceBuilder

License requirements: ugweld ("UG WELD")
.

setWeldAssoColor(NXColor) - Method in interface nxopen.weld.WeldPreferenceBuilder

License requirements: ugweld ("UG WELD")
.

setWeldConstLayer(int) - Method in interface nxopen.weld.WeldPreferenceBuilder

License requirements: ugweld ("UG WELD")
.

setWeldData(LineWeldData) - Method in interface nxopen.annotations.LineWeld

Sets the weld data.

setWeldDirection(MeshControlBuilder.WeldSide) - Method in interface nxopen.cae.MeshControlBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setWeldDirectionScarEdge(NXObject) - Method in interface nxopen.cae.MeshControlBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setWeldFaceDefinition(int) - Method in interface nxopen.cae.MeshControlBuilder

Set current weld face definition
License requirements: nx_masterfem ("Finite Element Modeling")
.

setWeldFixedColor(NXColor) - Method in interface nxopen.weld.WeldPreferenceBuilder

License requirements: ugweld ("UG WELD")
.

setWeldGroupIdLowerRange(String) - Method in interface nxopen.weld.WeldPreferenceBuilder

License requirements: ugweld ("UG WELD")
.

setWeldGroupIdUpperRange(String) - Method in interface nxopen.weld.WeldPreferenceBuilder

License requirements: ugweld ("UG WELD")
.

setWeldIdLowerRange(int) - Method in interface nxopen.weld.WeldPreferenceBuilder

License requirements: ugweld ("UG WELD")
.

setWeldIdUpperRange(int) - Method in interface nxopen.weld.WeldPreferenceBuilder

License requirements: ugweld ("UG WELD")
.

setWeldLineGap(double) - Method in interface nxopen.annotations.SymbolPreferences

Sets the weld symbol line gap
License requirements: None.

setWeldLineGap(double) - Method in interface nxopen.annotations.SymbolStyleBuilder

Sets the gap between the weld line and weld type symbol
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setWeldLineOption(boolean) - Method in interface nxopen.tooling.FlowDisplayBuilder

License requirements: ug_mold_design ("UG MOLD")
.

setWeldLocation(Point) - Method in interface nxopen.features.shipdesign.WeldCutBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setWeldNamePrefix(String) - Method in interface nxopen.weld.WeldPreferenceBuilder

License requirements: ugweld ("UG WELD")
.

setWeldNumberOfLayers(int) - Method in interface nxopen.cae.MeshControlBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setWeldObjectLayer(int) - Method in interface nxopen.weld.WeldPreferenceBuilder

License requirements: ugweld ("UG WELD")
.

setWeldPartNumber(String) - Method in interface nxopen.weld.WeldPreferenceBuilder

License requirements: ugweld ("UG WELD")
.

setWeldRetainedColor(NXColor) - Method in interface nxopen.weld.WeldPreferenceBuilder

License requirements: ugweld ("UG WELD")
.

setWeldRowSize(int) - Method in interface nxopen.cae.MeshControlDisplayOptionsBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setWeldSize(String) - Method in interface nxopen.annotations.LineWeldDataBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setWeldSizeCode(LineWeldDataBuilder.WeldSizeCodeType) - Method in interface nxopen.annotations.LineWeldDataBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setWeldSpaceFactor(double) - Method in interface nxopen.annotations.SymbolPreferences

Sets the weld symbol space factor
License requirements: None.

setWeldSpaceFactor(double) - Method in interface nxopen.annotations.SymbolStyleBuilder

Sets the weld space factor
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setWeldStandard(WeldStandard) - Method in interface nxopen.annotations.AnnotationManager

Sets the weld standard for the part file.

setWeldStandard(WeldStandard) - Method in interface nxopen.annotations.LineWeldData

License requirements: None.

setWeldSymbol(LineWeldDataBuilder.WeldSymbolType) - Method in interface nxopen.annotations.LineWeldDataBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setWeldSymbolCfw(LineCfw) - Method in interface nxopen.annotations.SymbolPreferences

Sets the weld symbol color, font, and width
License requirements: None.

setWeldSymbolColor(NXColor) - Method in interface nxopen.annotations.SymbolStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setWeldSymbolDecimalPlaces(int) - Method in interface nxopen.weld.WeldPreferenceBuilder

License requirements: ugweld ("UG WELD")
.

setWeldSymbolFont(DisplayableObject.ObjectFont) - Method in interface nxopen.annotations.SymbolStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setWeldSymbolSizeFactor(double) - Method in interface nxopen.annotations.SymbolPreferences

License requirements: None.

setWeldSymbolSizeFactor(double) - Method in interface nxopen.annotations.SymbolStyleBuilder

Sets the character size factor that controls the weld symbol size.

setWeldSymbolStandard(WeldStandard) - Method in interface nxopen.annotations.SymbolPreferences

Sets the weld symbol standard
License requirements: None.

setWeldSymbolStandard(WeldStandard) - Method in interface nxopen.annotations.SymbolStyleBuilder

Sets the weld symbol standard
License requirements: None.

setWeldSymbolStandard(String) - Method in interface nxopen.uf.UFDrf

Refer to UF_DRF_set_weld_symbol_standard for documentation.

setWeldSymbolWidth(LineWidth) - Method in interface nxopen.annotations.SymbolStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setWeldSymmetric(boolean) - Method in interface nxopen.weld.WeldGrooveBuilder

License requirements: ugweld ("UG WELD")
.

setWeldType(CAEWeldConnectionBuilder.WeldTypeEnum) - Method in interface nxopen.cae.CAEWeldConnectionBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setWeldType(WeldFeatureSetType) - Method in interface nxopen.weld.AutoPointBuilder

Deprecated.

Deprecated in NX10.0.0. Use overloaded function with PointMark enum instead.

setWeldType(PointMarkBuilder.WeldTypes) - Method in interface nxopen.weld.AutoPointBuilder

Sets the weld type references in the customer defaults to create.

setWeldType(int) - Method in interface nxopen.weld.JointItemBuilder

License requirements: structure_weld ("STRUCTURE WELD")
.

setWeldType(PointMarkBuilder.WeldTypes) - Method in interface nxopen.weld.PointMarkBuilder

License requirements: ugweld ("UG WELD")
.

setWeldType(WeldJointBuilder.WeldTypes) - Method in interface nxopen.weld.WeldJointBuilder

License requirements: structure_weld ("STRUCTURE WELD")
.

setWeldType(WeldFeatureSetType) - Method in interface nxopen.weld.WeldPointBuilder

Sets the weld type.

setWheelCsys(CoordinateSystem) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setWheelGlobal(boolean) - Method in interface nxopen.motion.TirePropertyCdBuilder

License requirements: mechanisms ("MECHANISMS")
.

setWheelPositionDefinition(BaseDataWheelBuilder.PositionDefinitionOptions) - Method in interface nxopen.features.vehicledesign.BaseDataBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setWheelProtrusionPoint(Point) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setWheelRoadRef(boolean) - Method in interface nxopen.motion.TirePropertyCdBuilder

License requirements: mechanisms ("MECHANISMS")
.

setWheelSize(DynamicCurbBuilder.WheelType) - Method in interface nxopen.features.vehicledesign.DynamicCurbBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setWheelSize(GroundClearanceBuilder.WheelType) - Method in interface nxopen.features.vehicledesign.GroundClearanceBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setWheelSize(InnerAngleBuilder.WheelSizeType) - Method in interface nxopen.features.vehicledesign.InnerAngleBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setWheelSize(SlopeBuilder.WheelSizeType) - Method in interface nxopen.features.vehicledesign.SlopeBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setWheelSize(WheelFixingBuilder.WheelSizeType) - Method in interface nxopen.features.vehicledesign.WheelFixingBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setWhiteBackground(boolean) - Method in interface nxopen.PrintBuilder

License requirements: None.

setWideValue(String) - Method in interface nxopen.blockstyler.StringBlock

License requirements: None.

setWidth(AutomaticCenterlineBuilder.CenterlineThickness) - Method in interface nxopen.annotations.AutomaticCenterlineBuilder

License requirements: drafting ("DRAFTING")
.

setWidth(CenterlineSettingsBuilder.CenterlineThickness) - Method in interface nxopen.annotations.CenterlineSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setWidth(EditSymbolDisplayBuilder.WidthTypes) - Method in interface nxopen.annotations.EditSymbolDisplayBuilder

License requirements: drafting ("DRAFTING")
.

setWidth(double) - Method in interface nxopen.annotations.ForeshorteningSymbolSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setWidth(LineWidth) - Method in interface nxopen.annotations.HatchBuilder

Deprecated.

Deprecated in NX7.5.0. Use HatchFillSettingsBuilder instead.

setWidth(LineWidth) - Method in interface nxopen.annotations.HatchFillSettingsBuilder

License requirements: drafting ("DRAFTING")
.

setWidth(IntersectionSymbolBuilder.Thickness) - Method in interface nxopen.annotations.IntersectionSymbolBuilder

License requirements: drafting ("DRAFTING")
.

setWidth(Value) - Method in interface nxopen.annotations.IRectangularTarget

Sets the target width.

setWidth(OffsetCenterPointBuilder.Thickness) - Method in interface nxopen.annotations.OffsetCenterPointBuilder

License requirements: drafting ("DRAFTING")
.

setWidth(Value) - Method in interface nxopen.annotations.RectangularTargetData

Sets the width.

setWidth(TargetPointBuilder.Thickness) - Method in interface nxopen.annotations.TargetPointBuilder

License requirements: drafting ("DRAFTING")
.

setWidth(int) - Method in interface nxopen.blockstyler.DrawingArea

License requirements: None.

setWidth(int) - Method in interface nxopen.blockstyler.MultilineString

License requirements: None.

setWidth(int) - Method in interface nxopen.blockstyler.ScrolledWindow

License requirements: None.

setWidth(int) - Method in interface nxopen.cae.xyplot.BaseBarStyleSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setWidth(DisplayableObject.ObjectWidth) - Method in interface nxopen.cae.xyplot.BaseLineStyleSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setWidth(double) - Method in interface nxopen.cam.InspectionCparlnFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setWidth(double) - Method in interface nxopen.cam.InspectionParplnFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setWidth(double) - Method in interface nxopen.cam.LaserCutoutDefinition

License requirements: cam_base ("CAM BASE")
.

setWidth(double) - Method in interface nxopen.ColorWidth

License requirements: None.

setWidth(double) - Method in interface nxopen.CustomWidth

License requirements: None.

setWidth(double) - Method in interface nxopen.die.HandlingCoreChildBuilder

Sets the width of the handling core.

setWidth(double) - Method in interface nxopen.die.HandlingCoreParentBuilder

Sets the width of handling cores.

setWidth(double) - Method in interface nxopen.die.KeywayChildBuilder

Sets the width of the keyway.

setWidth(double) - Method in interface nxopen.die.KeywayParentBuilder

Sets the width of keyways.

setWidth(double) - Method in interface nxopen.die.PadChildBuilder

Sets the width of the die pad.

setWidth(double) - Method in interface nxopen.die.PadParentBuilder

Sets the width of die pads.

setWidth(String) - Method in interface nxopen.die.PierceHoleChildBuilder

License requirements: ug_die_design ("Die Design")
.

setWidth(String) - Method in interface nxopen.die.PierceHoleParentBuilder

License requirements: ug_die_design ("Die Design")
.

setWidth(double) - Method in interface nxopen.drawings.BordersAndZonesBuilder

Deprecated.

Deprecated in NX10.0.0. Use SheetBorderSettingsBuilder.borderLineWidth() instead.

setWidth(BrokenViewBuilder.LineWidth) - Method in interface nxopen.drawings.BrokenViewBuilder

License requirements: None.

setWidth(SectionLineStyleBuilder.WidthStyle) - Method in interface nxopen.drawings.SectionLineStyleBuilder

Deprecated.

Deprecated in NX10.0.0. Use ViewSectionLineBuilder.lineColorFontWidth() instead.

setWidth(String, ShipbuildingLinesViewStyle.Lines, Width) - Method in interface nxopen.drawings.ShipbuildingLinesViewStyle

The width of hidden line or edges.

setWidth(String, ShipDraftingViewLinesViewStyle.Lines, Width) - Method in interface nxopen.drawings.ShipDraftingViewLinesViewStyle

The width of ship line.

setWidth(Width) - Method in interface nxopen.drawings.ViewStyleFPCurvesBuilder

License requirements: drafting ("DRAFTING")
.

setWidth(Width) - Method in interface nxopen.drawings.ViewStyleHiddenLinesBuilder

License requirements: drafting ("DRAFTING")
.

setWidth(Width) - Method in interface nxopen.drawings.ViewStyleSmoothEdgesBuilder

License requirements: drafting ("DRAFTING")
.

setWidth(Width) - Method in interface nxopen.drawings.ViewStyleVirtualIntersectionsBuilder

License requirements: drafting ("DRAFTING")
.

setWidth(String) - Method in interface nxopen.features.BlockFeatureBuilder

The expression representing the block width.

setWidth(String) - Method in interface nxopen.features.sheetmetal.BeadBuilder

Deprecated.

Deprecated in NX10.0.0. Use Expression.setRightHandSide(java.lang.String) on the Expression object returned from BeadBuilder.width() instead.

setWidth(String) - Method in interface nxopen.features.sheetmetal.LouverBuilder

Deprecated.

Deprecated in NX10.0.0. Use Expression.setRightHandSide(java.lang.String) on the Expression object returned from LouverBuilder.width() instead.

setWidth(PartObject.WidthType) - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder

License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setWidth(double) - Method in interface nxopen.features.vehicledesign.BaseDataWheelBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setWidth(DisplayableObject.ObjectWidth) - Method in interface nxopen.LineWidthBuilder

License requirements: None.

setWidth(PartDrafting.WidthType) - Method in interface nxopen.preferences.PartDrafting

Sets the line width of the retained Annotation objects
License requirements: None.

setWidth(PartObject.ObjectType, PartObject.WidthType) - Method in interface nxopen.preferences.PartObject

Sets width for specified object type
License requirements: None.

setWidth(String, ShipbuildingLinesViewPreferences.Lines, Width) - Method in interface nxopen.preferences.ShipbuildingLinesViewPreferences

The width of hidden line or edges.

setWidth(String, ShipDraftingViewLinesViewPreferences.Lines, Width) - Method in interface nxopen.preferences.ShipDraftingViewLinesViewPreferences

The width of hidden line or edges.

setWidth(double) - Method in interface nxopen.routing.electrical.ElectricalStockDefinition

Sets the width of stock
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setWidth(double) - Method in interface nxopen.tooling.BlankLayoutBuilder

License requirements: None.

setWidth(double) - Method in interface nxopen.tooling.QuickQuotationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setWidth(String) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder

License requirements: None.

setWidth(int) - Method in interface nxopen.uistyler.DialogItem

Specifies the pixel width for the dialog.

setWidth(double) - Method in interface nxopen.weld.WeldFillBuilder

License requirements: ugweld ("UG WELD")
.

setWidth1ScaleFactor(double) - Method in interface nxopen.PrintBuilder

License requirements: None.

setWidth2ScaleFactor(double) - Method in interface nxopen.PrintBuilder

License requirements: None.

setWidth3ScaleFactor(double) - Method in interface nxopen.PrintBuilder

License requirements: None.

setWidth4ScaleFactor(double) - Method in interface nxopen.PrintBuilder

License requirements: None.

setWidth5ScaleFactor(double) - Method in interface nxopen.PrintBuilder

License requirements: None.

setWidth6ScaleFactor(double) - Method in interface nxopen.PrintBuilder

License requirements: None.

setWidth7ScaleFactor(double) - Method in interface nxopen.PrintBuilder

License requirements: None.

setWidth8ScaleFactor(double) - Method in interface nxopen.PrintBuilder

License requirements: None.

setWidth9ScaleFactor(double) - Method in interface nxopen.PrintBuilder

License requirements: None.

setWidthAlong(WeldFillBuilder.WidthAlongType) - Method in interface nxopen.weld.WeldFillBuilder

License requirements: ugweld ("UG WELD")
.

setWidthAsString(String) - Method in interface nxopen.blockstyler.StringBlock

License requirements: None.

setWidthDimensionType(AeroFlangeBuilder.WidthDimensionOptions) - Method in interface nxopen.features.AeroFlangeBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setWidthDirection(BridgeTransitionBuilder.WidthDirectionOptions) - Method in interface nxopen.features.sheetmetal.BridgeTransitionBuilder

License requirements: nx_flexible_pcb ("NX Flexible PCB") OR nx_sheet_metal ("NX Sheet Metal")
.

setWidthFactorMode(DxfdwgCreator.WidthfactorMethodOptions) - Method in interface nxopen.DxfdwgCreator

License requirements: None.

setWidthHeight(double, double) - Method in interface nxopen.linedesigner.PickRectanglePointsBuilder

SetWidthHeight
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

setWidthMethod(AeroFlangeBuilder.WidthMethods) - Method in interface nxopen.features.AeroFlangeBuilder

License requirements: nx_aero_design (" NX Aero Design")
.

setWidthOption(LineWidthOption) - Method in interface nxopen.LineWidthBuilder

License requirements: None.

setWidthOptions(boolean, double) - Method in interface nxopen.preferences.PartVisualizationLine

Modifies the show widths and width scale options.

setWidths(CGMBuilder.Width) - Method in interface nxopen.CGMBuilder

License requirements: None.

setWidths(PlotColorsWidthsBuilder.Width) - Method in interface nxopen.PlotColorsWidthsBuilder

License requirements: None.

setWidths(PrintPDFBuilder.Width) - Method in interface nxopen.PrintPDFBuilder

License requirements: None.

setWidthScale(double) - Method in interface nxopen.display.DecalBuilder

License requirements: None.

setWidthScale(double) - Method in interface nxopen.preferences.PartVisualizationLine

Sets the width scale option.

setWidthSide(GussetBuilder.WidthSides) - Method in interface nxopen.features.sheetmetal.GussetBuilder

License requirements: nx_sheet_metal ("NX Sheet Metal")
.

setWidthSource(int) - Method in interface nxopen.ColorWidth

License requirements: None.

setWidthTolerance(double) - Method in interface nxopen.geometricutilities.DisplayResolutionBuilder

License requirements: None.

setWidthType(SearchModelViewBuilder.ValueComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder

License requirements: None.

setWidthType(BridgeTransitionBuilder.WidthOptions) - Method in interface nxopen.features.sheetmetal.BridgeTransitionBuilder

License requirements: nx_flexible_pcb ("NX Flexible PCB") OR nx_sheet_metal ("NX Sheet Metal")
.

setWidthType(FlangeBuilder.WidthTypeOptions) - Method in interface nxopen.features.sheetmetal.FlangeBuilder

Sets the width type for flange.

setWidthValue(double) - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder

License requirements: None.

setWidthValueAsString(String) - Method in interface nxopen.blockstyler.TextColorFontWidth

License requirements: None.

setWindCatcherDuct(Stock) - Method in interface nxopen.routing.WindCatcherBuilder

License requirements: routing_hvac ("Routing HVAC")
.

setWindowIndex(int) - Method in interface nxopen.cae.GraphFromResultProbeBuilder

The window index will be set
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setWindowType(AllAroundVisionBuilder.WindowTypes) - Method in interface nxopen.features.vehicledesign.AllAroundVisionBuilder

License requirements: nx_general_packaging ("NX General Packaging")
.

setWireDiameter(double) - Method in interface nxopen.cam.WedmBasedGeomBuilder

License requirements: cam_base ("CAM BASE")
.

setWireEdmFeedRate(String, double, int) - Method in interface nxopen.cam.CAMObject

Set feed rate value and side to the parameter index for the object, side is only used in wire edm.

setWireEDMStartHoles(boolean) - Method in interface nxopen.annotations.HoleTableSettingsHoleFiltersBuilder

License requirements: drafting ("DRAFTING")
.

setWireFrame(boolean) - Method in interface nxopen.JtCreator

License requirements: None.

setWireframeBlendOptions(PartVisualizationEmphasis.WireframeBlendOptions) - Method in interface nxopen.preferences.PartVisualizationEmphasis

Modifies options that control the color-blending effect used to de-emphasize wireframe geometry.

setWireframeColorSource(GeneralWireframeColorSourceOption) - Method in interface nxopen.drawings.GeneralViewStyle

Sets the source of the wireframe color for a member view.

setWireframeColorSource(GeneralWireframeColorSourceOption) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder

License requirements: drafting ("DRAFTING")
.

setWireframeColorSource(GeneralWireframeColorSourceOption) - Method in interface nxopen.preferences.GeneralViewPreferences

Sets the source of the wireframe color for a member view.

setWireframeContrast(boolean) - Method in interface nxopen.preferences.VisualizationLine

Sets whether colors applied to wireframe geometry are automatically adjusted as necessary to produce a minimum contrast relative to the view background.

setWireframeGeometryImportColor(int) - Method in interface nxopen.preferences.SessionNXGateway

Sets the wireframe geometry import color for I-DEAS
License requirements: None.

setWireframeGeometryImportLayer(int) - Method in interface nxopen.preferences.SessionNXGateway

Sets the wireframe geometry import layer for I-DEAS
License requirements: None.

setWirePosition(WedmCutParameters.WirePositionTypes) - Method in interface nxopen.cam.WedmCutParameters

License requirements: cam_base ("CAM BASE")
.

setWireSpacing(double) - Method in interface nxopen.routing.electrical.CableStockDefinition

Sets the separation between wires in a cable.

setWireType(String) - Method in interface nxopen.routing.electrical.ElectricalStockDefinition

Sets the wire type of stock
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

setWithoutFalseBody(boolean) - Method in interface nxopen.tooling.DieInsertBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setWithoutFalseBody(boolean) - Method in interface nxopen.tooling.SpecialFormingBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setWithoutWorkflow(boolean) - Method in interface nxopen.tooling.DieEngDieTipBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setWithoutWorkflowSheet(Body) - Method in interface nxopen.die.PierceTaskBuilder

License requirements: die_engineering ("DIE ENGINEERING")
.

setWithScale(boolean) - Method in interface nxopen.blockstyler.AngularDimension

License requirements: None.

setWithScale(boolean) - Method in interface nxopen.blockstyler.ExpressionBlock

License requirements: None.

setWithScale(boolean) - Method in interface nxopen.blockstyler.LinearDimension

License requirements: None.

setWithScale(boolean) - Method in interface nxopen.blockstyler.OnPathDimension

License requirements: None.

setWithScale(boolean) - Method in interface nxopen.blockstyler.RadiusDimension

License requirements: None.

setWizardType(int) - Method in interface nxopen.tooling.AssemblyDrawingBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setWizardType(int) - Method in interface nxopen.tooling.CompDrawingBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setWizardType(int) - Method in interface nxopen.tooling.FaceColorManagementBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") OR nx_electrode_wizard ("NX Electrode Wizard")
.

setWizardType(int) - Method in interface nxopen.tooling.GeneralInsertBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setWizardType(int) - Method in interface nxopen.tooling.HoleDatumSymbolBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setWizardType(int) - Method in interface nxopen.tooling.HoleManufacturingNoteBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setWizardType(int) - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setWizardType(int) - Method in interface nxopen.tooling.RenameAndExportComponentBuilder

License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

setWizardType(int) - Method in interface nxopen.tooling.ShimBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setWizardType(int) - Method in interface nxopen.tooling.SpecialFormingBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setWizardType(int) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.

setWordWrap(boolean) - Method in interface nxopen.blockstyler.Label

License requirements: None.

setWork(BasePart) - Method in interface nxopen.PartCollection

Sets the current work part.

setWorkAreaLength(double) - Method in interface nxopen.tooling.QuickQuotationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setWorkAreaWidth(double) - Method in interface nxopen.tooling.QuickQuotationBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setWorkComponent(Component) - Method in interface nxopen.PartCollection

Sets the work component.

setWorkComponent(Component, PartCollection.RefsetOption, PartCollection.WorkComponentOption) - Method in interface nxopen.PartCollection

Sets the work component.

setWorkComponentOverride(Component) - Method in interface nxopen.PartCollection

Sets the component with override part as the work component.

setWorkCoordinateSystem(CoordinateSystem) - Method in interface nxopen.weld.ExportWeldJointBuilder

License requirements: structure_weld ("STRUCTURE WELD")
.

setWorkflow(DxfdwgImporter.WorkflowAs) - Method in interface nxopen.DxfdwgImporter

License requirements: None.

setWorkingList(PenetrationSite, PenetrationList) - Method in interface nxopen.features.shipdesign.PenetrationUtils

Set current PenetrationList
License requirements: nx_penetration_mgmt ("Penetration Management")

Created in NX8.0.0

setWorkingList(IssueList) - Method in interface nxopen.issue.IssueManager

Sets the current working IssueList
License requirements: nx_issue_mgmt ("NX Issue Tracking")

Created in NX8.5.0

setWorkingPart(NXObject) - Method in interface nxopen.tooling.EjectorTableBuilder

License requirements: ug_mold_design ("UG MOLD")
.

setWorkLayer(int) - Method in interface nxopen.layer.LayerManager

Sets the work layer.

setWorkModeWeight(int, double) - Method in interface nxopen.cae.PreTestSolution

Sets weight for a specific work mode
License requirements: nx_correl_base ("FE Correlation")
.

setWorkOccurrence(Tag) - Method in interface nxopen.uf.UFAssem

Refer to UF_ASSEM_set_work_occurrence for documentation.

setWorkOffset(int) - Method in interface nxopen.cam.ProbeCalibrateStylusMoveBuilder

License requirements: None.

setWorkOffset(int) - Method in interface nxopen.cam.ProbeControlParametersBuilder

License requirements: None.

setWorkPart(TaggedObject) - Method in interface nxopen.tooling.BlankGeneratorBuilder

License requirements: None.

setWorkPart(BasePart) - Method in interface nxopen.tooling.MWDefineSheetsBuilder

Set work part
License requirements: None.

setWorkPart(Tag) - Method in interface nxopen.uf.UFAssem

Refer to UF_ASSEM_set_work_part for documentation.

setWorkPart(Part) - Method in interface nxopen.weld.WeldJointBuilder

License requirements: structure_weld ("STRUCTURE WELD")
.

setWorkPartDisplayAsEntirePart(boolean) - Method in interface nxopen.preferences.SessionAssemblies

Sets the work part display as entire part option
License requirements: None.

setWorkPartEmphasis(boolean) - Method in interface nxopen.preferences.SessionVisualizationEmphasis

Sets the setting that controls whether or not the work part is emphasized.

setWorkPartEmphasize(boolean) - Method in interface nxopen.preferences.SessionAssemblies

Deprecated.

Deprecated in NX8.5.0. Use Preferences.SessionVisualizationEmphasis#setWorkPartEmphasis instead.

setWorkPartMaintain(boolean) - Method in interface nxopen.preferences.SessionAssemblies

Sets the work part maintain option
License requirements: None.

setWorkPartQuietly(Tag) - Method in interface nxopen.uf.UFAssem

Deprecated.

The equivalent Open C method has retired

setWorkPartWarnOnAutomaticChange(boolean) - Method in interface nxopen.preferences.SessionAssemblies

Sets the warn on automatic change for work part option
License requirements: None.

setWorkpieceFace(Face) - Method in interface nxopen.cam.ConvertFromMCDBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

setWorkpieceNameFilter(String) - Method in interface nxopen.tooling.ElectrodeCheckingBuilder

License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.

setWorkpieceString(String) - Method in interface nxopen.cam.InspectionLinkPmiBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setWorkPlaneDimClr(int) - Method in interface nxopen.uf.UFDisp

Deprecated.

The equivalent Open C method has retired

setWorkPlaneEmphasis(int) - Method in interface nxopen.uf.UFDisp

Refer to UF_DISP_set_work_plane_emphasis for documentation.

setWorkPlaneSel(int) - Method in interface nxopen.uf.UFDisp

Refer to UF_DISP_set_work_plane_sel for documentation.

setWorkPositionAngle(double) - Method in interface nxopen.sim.KinematicComponentBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setWorkPositionAngleType(KinematicComponentBuilder.WorkPositionAngleTypes) - Method in interface nxopen.sim.KinematicComponentBuilder

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setWorkRegionDefinitionMethod(DefineWorkRegionBuilder.WorkRegionDefinitionMethods) - Method in interface nxopen.features.subdivision.DefineWorkRegionBuilder

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setWorkSolution(SimSolution) - Method in interface nxopen.cae.CorrelSolutionBuilder

License requirements: nx_correl_base ("FE Correlation")
.

setWorkView(View) - Method in interface nxopen.geometricutilities.SupportPlaneData

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setWrapMethod(InsulationBuilder.WrapType) - Method in interface nxopen.mechanicalrouting.InsulationBuilder

License requirements: routing_base ("Routing Basic")
.

setWrapMethod(OverstockBuilder.WrapType) - Method in interface nxopen.routing.OverstockBuilder

License requirements: routing_advanced ("Routing Advanced") OR routing_harness ("Routing Harness") OR routing_cabling ("Routing Cabling") OR routing_pipetube ("Routing Piping and Tubing") OR routing_hvac ("Routing HVAC") OR routing_platform ("Routing Platform") OR routing_pid ("Routing PID")
.

setWrapSpin(boolean) - Method in interface nxopen.blockstyler.DoubleBlock

License requirements: None.

setWrapSpin(boolean) - Method in interface nxopen.blockstyler.DoubleTable

License requirements: None.

setWrapSpin(boolean) - Method in interface nxopen.blockstyler.IntegerBlock

License requirements: None.

setWrapSpin(boolean) - Method in interface nxopen.blockstyler.IntegerTable

License requirements: None.

setWrenchSize(double) - Method in interface nxopen.cam.LaserCutoutDefinition

License requirements: cam_base ("CAM BASE")
.

setWriteSolidAs(Catiav4Creator.SolidBodyOutputOption) - Method in interface nxopen.Catiav4Creator

License requirements: None.

setWrkPt1(Point) - Method in interface nxopen.cae.CorrelAlignmentBuilder

License requirements: nx_correl_base ("FE Correlation")
.

setWrkPt2(Point) - Method in interface nxopen.cae.CorrelAlignmentBuilder

License requirements: nx_correl_base ("FE Correlation")
.

setWrkPt3(Point) - Method in interface nxopen.cae.CorrelAlignmentBuilder

License requirements: nx_correl_base ("FE Correlation")
.

setWScale(double) - Method in interface nxopen.geometricutilities.FrameOnPathBuilder

License requirements: None.

setWScale(double) - Method in interface nxopen.geometricutilities.RectangularFrameBuilder

License requirements: None.

setWx(double) - Method in interface nxopen.motion.LinkInitialVelocity

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using LinkInitialVelocity.wxExpression() to query or edit it.

setWy(double) - Method in interface nxopen.motion.LinkInitialVelocity

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using LinkInitialVelocity.wyExpression() to query or edit it.

setWz(double) - Method in interface nxopen.motion.LinkInitialVelocity

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using LinkInitialVelocity.wzExpression() to query or edit it.

setX(double) - Method in interface nxopen.cam.InspectionLineFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setX(double) - Method in interface nxopen.cam.InspectionMeasurePointBuilder

License requirements: None.

setX(String) - Method in interface nxopen.sim.KinematicChain

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setXAxis(Vector3d) - Method in interface nxopen.blockstyler.SpecifyOrientation

License requirements: None.

setXAxis(double) - Method in interface nxopen.cam.AlongMachineAxisMoveBuilder

License requirements: None.

setXAxis(double) - Method in interface nxopen.cam.AlongMcsAxisMoveBuilder

License requirements: None.

setXAxis(Direction) - Method in interface nxopen.features.vehicledesign.VehicleCoordinateSystemBuilder

License requirements: nx_general_packaging ("NX General Packaging") OR ug_body_design ("Body Design") OR nx_posture ("NX Jack Posture Prediction")
.

setXAxis(Vector3d) - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionPlaneBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setXAxis(Vector3d) - Method in interface nxopen.geometricutilities.AnchorLocatorBuilder

License requirements: None.

setXaxisOption(PostGraphAlongPathBuilder.Xaxis) - Method in interface nxopen.cae.PostGraphAlongPathBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setXAxisType(GraphBuilder.XAxisTypeChoices) - Method in interface nxopen.motion.GraphBuilder

Deprecated.

Deprecated in NX11.0.0. Use Motion.GraphObjectBuilder instead.

setXcMapping(TurnOrientWcs.XcMappingTypes) - Method in interface nxopen.cam.TurnOrientWcs

License requirements: None.

setXConstant(double) - Method in interface nxopen.motion.VObject

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using Motion.VObject#xexpression to query or edit it.

setXCoordinate(double) - Method in interface nxopen.drafting.MoveToDrawingViewBuilder

License requirements: nx_layout ("NX Layout")
.

setXCoordinate(double) - Method in interface nxopen.drawings.ViewCenterCoordinateBuilder

Deprecated.

Deprecated in NX7.5.0. Use nxopen.drawings.ViewCenterCoordinateBuilder#setXCoordinateExp

setXCoordinate(double) - Method in interface nxopen.weld.DatumSurfaceBuilder

License requirements: ugweld ("UG WELD")
.

setXCoordinateUnit(BaseUnit) - Method in interface nxopen.cae.ftk.ArrayRecord2D

Sets X-Coordinate unit
License requirements: nx_ftk ("NX Advanced Graphing")
.

setXCoordinateUnit(BaseUnit) - Method in interface nxopen.cae.ftk.SectionBasedMatrixRecord

License requirements: nx_ftk ("NX Advanced Graphing")
.

setXCount(int) - Method in interface nxopen.die.PressureSystemParentBuilder

Sets the x count of pressure systems.

setXCurve(GraphBuilder.CurveData) - Method in interface nxopen.motion.GraphBuilder

Deprecated.

Deprecated in NX11.0.0. Use Motion.GraphObjectBuilder instead.

setXCurve(MotionFunction) - Method in interface nxopen.motion.RoadBuilder

License requirements: mechanisms ("MECHANISMS")
.

setXDatumFilter(ShipSectionBuilder.XFilter) - Method in interface nxopen.features.shipdesign.ShipSectionBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_detail ("Ship Detail Design")
.

setXDimension(double) - Method in interface nxopen.CGMBuilder

License requirements: None.

setXDimension(double) - Method in interface nxopen.PrintPDFBuilder

License requirements: None.

setXDirection(Direction) - Method in interface nxopen.drawings.OvtBuilder

License requirements: drafting ("DRAFTING")
.

setXDirection(Direction) - Method in interface nxopen.drawings.ProjectedViewOrientationBuilder

License requirements: drafting ("DRAFTING")
.

setXDirection(Direction) - Method in interface nxopen.drawings.SvtBuilder

License requirements: drafting ("DRAFTING")
.

setXDirection(ShipCoordinatesBuilder.XDirectionType) - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design") OR routing_base ("Routing Basic")
.

setXDirection(Direction) - Method in interface nxopen.geometricutilities.RectangularPattern

License requirements: None.

setXDirectionDelta(String) - Method in interface nxopen.geometricutilities.PatternClocking

Deprecated.

Deprecated in NX8.0.0. This functionality is no longer supported.

setXDirectionType(int) - Method in interface nxopen.features.shipdesign.PlatePreparationBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setXDisplay(PlotBuilder.XdisplayOption) - Method in interface nxopen.PlotBuilder

License requirements: None.

setXDistance(double) - Method in interface nxopen.die.PressureSystemParentBuilder

Sets the x distance of pressure systems.

setXDistance(double) - Method in interface nxopen.die.RibParentBuilder

Sets the x distance of die ribs.

setXDistance(double) - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design") OR routing_base ("Routing Basic")
.

setXDistanceBuilder(double) - Method in interface nxopen.cam.MachineHeadGroupBuilder

License requirements: cam_base ("CAM BASE")
.

setXDistanceFirst(double) - Method in interface nxopen.tooling.DieBaseBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setXDistanceSecond(double) - Method in interface nxopen.tooling.DieBaseBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setXEnabled(boolean) - Method in interface nxopen.geometricanalysis.sectionanalysis.XYZPlaneBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setXFlip(boolean) - Method in interface nxopen.geometricutilities.RectangularPattern

License requirements: None.

setXformTagOfDatumCsys(Tag, Tag) - Method in interface nxopen.uf.UFModlFeatures

Refer to UF_MODL_set_xform_tag_of_datum_csys for documentation.

setXFrameOption(String) - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design") OR routing_base ("Routing Basic")
.

setXFunction(Function) - Method in interface nxopen.motion.BushingGeneralCoefficientsComponent

License requirements: mechanisms ("MECHANISMS")
.

setXFunction(Function) - Method in interface nxopen.motion.VObject

License requirements: mechanisms ("MECHANISMS")
.

setXhatchMat(String, String, int) - Method in interface nxopen.uf.UFDrf

Refer to UF_DRF_set_xhatch_mat for documentation.

setXMaxDatumFilter(int) - Method in interface nxopen.features.shipdesign.ShipSectionBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_detail ("Ship Detail Design")
.

setXMinDatumFilter(int) - Method in interface nxopen.features.shipdesign.ShipSectionBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_detail ("Ship Detail Design")
.

setXoffset(double) - Method in interface nxopen.cam.RotateToolMoveBuilder

License requirements: None.

setXoffset(int, double) - Method in interface nxopen.cam.ToolTrackingPointBuilder

Set the X offset
License requirements: None.

setXOffset(double) - Method in interface nxopen.die.PressureSystemParentBuilder

Sets the x offset of pressure systems.

setXOffset(double) - Method in interface nxopen.die.RibParentBuilder

Sets the x offset of die ribs.

setXOffset(double) - Method in interface nxopen.PlotBuilder

License requirements: None.

setXoffsetToggle(boolean) - Method in interface nxopen.cam.RotateToolMoveBuilder

License requirements: None.

setXoffsetToggle(boolean) - Method in interface nxopen.cam.ToolChangeCiBuilder

License requirements: cam_base ("CAM BASE")
.

setXoffsetToggle(int, boolean) - Method in interface nxopen.cam.ToolTrackingPointBuilder

Set the X offset Toggle Status
License requirements: None.

setXOption(boolean) - Method in interface nxopen.cae.NodeModifyLocationBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setXOutput(boolean) - Method in interface nxopen.cam.AlongMachineAxisMoveBuilder

License requirements: None.

setXPath(Section) - Method in interface nxopen.geometricutilities.AlongPathPattern

License requirements: None.

setXPathOption(AlongPathPattern.PathOptions) - Method in interface nxopen.geometricutilities.AlongPathPattern

License requirements: None.

setXPlaneUserDefined(boolean) - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setXPosition(double) - Method in interface nxopen.features.shipdesign.SectionViewBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setXRayCage(boolean) - Method in interface nxopen.preferences.SubdivisionModelingPreferences

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setXref(LayoutBuilder.XrefNum) - Method in interface nxopen.tooling.LayoutBuilder

License requirements: None.

setXresultComponent(Result.Component) - Method in interface nxopen.cae.PostGraphOrbitBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setXRotationDOFMode(InspectionMethodBuilder.ToleranceDegreeOfFreedomMode) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setXRotationLowerLimit(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setXRotationUpperLimit(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setXScaleFactor(double) - Method in interface nxopen.cae.NodeTranslateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setXSegments(int) - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilderEx

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setXShift(double) - Method in interface nxopen.tooling.BlankLayoutBuilder

License requirements: None.

setXSymmetryToggle(boolean) - Method in interface nxopen.geometricutilities.RectangularPattern

License requirements: None.

setXtDatumLetter(String) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setXtDistance(double) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setXtFeature(String) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setXtMethod(InspectionAlignmentBuilder.XtMethods) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setXTranslationDOFMode(InspectionMethodBuilder.ToleranceDegreeOfFreedomMode) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setXTranslationLowerLimit(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setXTranslationUpperLimit(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setXValue(double) - Method in interface nxopen.motion.BushingGeneralCoefficientsComponent

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using Motion.BushingGeneralCoefficientsComponent#xexpression to query or edit it.

setXVector(Direction) - Method in interface nxopen.features.PatternFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setXVectorForEqualArcLength(Direction) - Method in interface nxopen.features.ProjectCurveBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setXyClip(Tag, double[]) - Method in interface nxopen.uf.UFView

Refer to UF_VIEW_set_xy_clip for documentation.

setXyDirectionOfXform(Tag, double[], double[]) - Method in interface nxopen.uf.UFSo

Refer to UF_SO_set_xy_direction_of_xform for documentation.

setXyGridStyle(GridStyle) - Method in interface nxopen.cae.xyplot.BaseGridLayoutStyleSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setXyz(CurveCurvatureAnalysisBuilder.XyzTypes) - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder

License requirements: None.

setXyzDirection(DeviationGaugeBuilder.XyzDirectionType) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder

License requirements: studio_free_form ("STUDIO FREE FORM")
.

setY(double) - Method in interface nxopen.cam.InspectionLineFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setY(double) - Method in interface nxopen.cam.InspectionMeasurePointBuilder

License requirements: None.

setY(String) - Method in interface nxopen.sim.KinematicChain

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setYAxis(Vector3d) - Method in interface nxopen.blockstyler.SpecifyOrientation

License requirements: None.

setYAxis(double) - Method in interface nxopen.cam.AlongMachineAxisMoveBuilder

License requirements: None.

setYAxis(double) - Method in interface nxopen.cam.AlongMcsAxisMoveBuilder

License requirements: None.

setYAxis(Vector3d) - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionPlaneBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setYAxis(Vector3d) - Method in interface nxopen.geometricutilities.AnchorLocatorBuilder

License requirements: None.

setYcMapping(TurnOrientWcs.YcMappingTypes) - Method in interface nxopen.cam.TurnOrientWcs

License requirements: None.

setYConstant(double) - Method in interface nxopen.motion.VObject

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using Motion.VObject#yexpression to query or edit it.

setYCoordinate(double) - Method in interface nxopen.drafting.MoveToDrawingViewBuilder

License requirements: nx_layout ("NX Layout")
.

setYCoordinate(double) - Method in interface nxopen.drawings.ViewCenterCoordinateBuilder

Deprecated.

Deprecated in NX7.5.0. Use nxopen.drawings.ViewCenterCoordinateBuilder#setYCoordinateExp

setYCoordinate(double) - Method in interface nxopen.weld.DatumSurfaceBuilder

License requirements: ugweld ("UG WELD")
.

setYCoordinateUnit(BaseUnit) - Method in interface nxopen.cae.ftk.ArrayRecord2D

Sets Y-Coordinate unit
License requirements: nx_ftk ("NX Advanced Graphing")
.

setYCoordinateUnit(BaseUnit) - Method in interface nxopen.cae.ftk.SectionBasedMatrixRecord

License requirements: nx_ftk ("NX Advanced Graphing")
.

setYCount(int) - Method in interface nxopen.die.PressureSystemParentBuilder

Sets the y count of pressure systems.

setYCurve(MotionFunction) - Method in interface nxopen.motion.RoadBuilder

License requirements: mechanisms ("MECHANISMS")
.

setYCurve(MotionFunction) - Method in interface nxopen.motion.SegmentBuilder

License requirements: mechanisms ("MECHANISMS")
.

setYDatumFilter(int) - Method in interface nxopen.features.shipdesign.ShipSectionBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_detail ("Ship Detail Design")
.

setYDimension(double) - Method in interface nxopen.CGMBuilder

License requirements: None.

setYDimension(double) - Method in interface nxopen.PrintPDFBuilder

License requirements: None.

setYDirection(ShipCoordinatesBuilder.YDirectionType) - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design") OR routing_base ("Routing Basic")
.

setYDirection(Direction) - Method in interface nxopen.geometricutilities.AlongPathPattern

License requirements: None.

setYDirection(Direction) - Method in interface nxopen.geometricutilities.RectangularPattern

License requirements: None.

setYDirectionDelta(String) - Method in interface nxopen.geometricutilities.PatternClocking

Deprecated.

Deprecated in NX8.0.0. This functionality is no longer supported.

setYDirectionOption(AlongPathPattern.YDirectionOptions) - Method in interface nxopen.geometricutilities.AlongPathPattern

License requirements: None.

setYDisplay(PlotBuilder.YdisplayOption) - Method in interface nxopen.PlotBuilder

License requirements: None.

setYDistance(double) - Method in interface nxopen.die.PressureSystemParentBuilder

Sets the y distance of pressure systems.

setYDistance(double) - Method in interface nxopen.die.RibParentBuilder

Sets the y distance of die ribs.

setYDistance(double) - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design") OR routing_base ("Routing Basic")
.

setYDistanceBuilder(double) - Method in interface nxopen.cam.MachineHeadGroupBuilder

License requirements: cam_base ("CAM BASE")
.

setYDistanceFirst(double) - Method in interface nxopen.tooling.DieBaseBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setYDistanceSecond(double) - Method in interface nxopen.tooling.DieBaseBuilder

License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.

setYear(String) - Method in interface nxopen.DateItemBuilder

License requirements: None.

setYellowPoint(double) - Method in interface nxopen.cae.LaminateFiberOrientationOptionsBuilder

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

setYEnabled(boolean) - Method in interface nxopen.geometricanalysis.sectionanalysis.XYZPlaneBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setYFlip(boolean) - Method in interface nxopen.geometricutilities.RectangularPattern

License requirements: None.

setYFrameEnum(ShipIntersectionsBuilder.Type) - Method in interface nxopen.features.shipdesign.ShipIntersectionsBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setYFrameOption(String) - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design") OR routing_base ("Routing Basic")
.

setYFunction(Function) - Method in interface nxopen.motion.BushingGeneralCoefficientsComponent

License requirements: mechanisms ("MECHANISMS")
.

setYFunction(Function) - Method in interface nxopen.motion.VObject

License requirements: mechanisms ("MECHANISMS")
.

setYMaxDatumFilter(int) - Method in interface nxopen.features.shipdesign.ShipSectionBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_detail ("Ship Detail Design")
.

setYMinDatumFilter(int) - Method in interface nxopen.features.shipdesign.ShipSectionBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_detail ("Ship Detail Design")
.

setYoffset(double) - Method in interface nxopen.cam.RotateToolMoveBuilder

License requirements: None.

setYoffset(int, double) - Method in interface nxopen.cam.ToolTrackingPointBuilder

Set the Y offset
License requirements: None.

setYOffset(double) - Method in interface nxopen.die.PressureSystemParentBuilder

Sets the y offset of pressure systems.

setYOffset(double) - Method in interface nxopen.die.RibParentBuilder

Sets the y offset of die ribs.

setYOffset(double) - Method in interface nxopen.PlotBuilder

License requirements: None.

setYoffsetToggle(boolean) - Method in interface nxopen.cam.RotateToolMoveBuilder

License requirements: None.

setYoffsetToggle(boolean) - Method in interface nxopen.cam.ToolChangeCiBuilder

License requirements: cam_base ("CAM BASE")
.

setYoffsetToggle(int, boolean) - Method in interface nxopen.cam.ToolTrackingPointBuilder

Set the Y offset Toggle Status
License requirements: None.

setYokeType(JointFrictionAdams.FrictionYokeType) - Method in interface nxopen.motion.JointFrictionAdams

Sets the yoke type
License requirements: mechanisms ("MECHANISMS")
.

setYokeType(JointFrictionRecurDyn.FrictionYokeType) - Method in interface nxopen.motion.JointFrictionRecurDyn

Sets the yoke type
License requirements: mechanisms ("MECHANISMS")
.

setYOption(boolean) - Method in interface nxopen.cae.NodeModifyLocationBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setYOutput(boolean) - Method in interface nxopen.cam.AlongMachineAxisMoveBuilder

License requirements: None.

setYPath(Section) - Method in interface nxopen.geometricutilities.AlongPathPattern

License requirements: None.

setYPathOption(AlongPathPattern.PathOptions) - Method in interface nxopen.geometricutilities.AlongPathPattern

License requirements: None.

setYPlaneUserDefined(boolean) - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.

setYPosition(double) - Method in interface nxopen.features.shipdesign.SectionViewBuilder

License requirements: nx_ship_drafting ("Ship Drafting")
.

setYref(LayoutBuilder.YrefNum) - Method in interface nxopen.tooling.LayoutBuilder

License requirements: None.

setYresultComponent(Result.Component) - Method in interface nxopen.cae.PostGraphOrbitBuilder

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

setYRotationDOFMode(InspectionMethodBuilder.ToleranceDegreeOfFreedomMode) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setYRotationLowerLimit(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setYRotationUpperLimit(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setYScaleFactor(double) - Method in interface nxopen.cae.NodeTranslateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setYSegments(int) - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilderEx

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setYShift(double) - Method in interface nxopen.tooling.BlankLayoutBuilder

License requirements: None.

setYSymmetryToggle(boolean) - Method in interface nxopen.geometricutilities.RectangularPattern

License requirements: None.

setYtDatumLetter(String) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setYtDistance(double) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setYtFeature(String) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setYtMethod(InspectionAlignmentBuilder.YtMethods) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setYTranslationDOFMode(InspectionMethodBuilder.ToleranceDegreeOfFreedomMode) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setYTranslationLowerLimit(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setYTranslationUpperLimit(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setYValue(double) - Method in interface nxopen.motion.BushingGeneralCoefficientsComponent

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using Motion.BushingGeneralCoefficientsComponent#yexpression to query or edit it.

setYVector(Direction) - Method in interface nxopen.features.PatternFaceBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setZ(double) - Method in interface nxopen.cam.InspectionLineFeatureBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setZ(double) - Method in interface nxopen.cam.InspectionMeasurePointBuilder

License requirements: None.

setZ(String) - Method in interface nxopen.sim.KinematicChain

License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

setZagLeadAngle(double) - Method in interface nxopen.cam.ToolAxisVariable

License requirements: cam_base ("CAM BASE")
.

setZagRotationAngle(double) - Method in interface nxopen.cam.ToolAxisVariable

License requirements: cam_base ("CAM BASE")
.

setZagRotationAxis(Direction) - Method in interface nxopen.cam.ToolAxisVariable

License requirements: cam_base ("CAM BASE")
.

setZagTiltAngle(double) - Method in interface nxopen.cam.ToolAxisVariable

License requirements: cam_base ("CAM BASE")
.

setZAxis(double) - Method in interface nxopen.cam.AlongMachineAxisMoveBuilder

License requirements: None.

setZAxis(double) - Method in interface nxopen.cam.AlongMcsAxisMoveBuilder

License requirements: None.

setZAxis(Direction) - Method in interface nxopen.features.vehicledesign.VehicleCoordinateSystemBuilder

License requirements: nx_general_packaging ("NX General Packaging") OR ug_body_design ("Body Design") OR nx_posture ("NX Jack Posture Prediction")
.

setZcConstant(double) - Method in interface nxopen.cam.DrillSurfaceBuilder

License requirements: cam_base ("CAM BASE")
.

setZClip(Tag, int[], double[]) - Method in interface nxopen.uf.UFView

Refer to UF_VIEW_set_Z_clip for documentation.

setZConstant(double) - Method in interface nxopen.motion.VObject

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using Motion.VObject#zexpression to query or edit it.

setZCoordinate(double) - Method in interface nxopen.drawings.ViewCenterCoordinateBuilder

Deprecated.

Deprecated in NX7.5.0. Use nxopen.drawings.ViewCenterCoordinateBuilder#setZCoordinateExp

setZCoordinate(double) - Method in interface nxopen.weld.DatumSurfaceBuilder

License requirements: ugweld ("UG WELD")
.

setZCoordinatePoints(double[]) - Method in interface nxopen.cae.ftk.ArrayRecord3D

Sets Z-Coordinate points
License requirements: nx_ftk ("NX Advanced Graphing")
.

setZCoordinateUnit(BaseUnit) - Method in interface nxopen.cae.ftk.ArrayRecord3D

Sets Z-Coordinate unit
License requirements: nx_ftk ("NX Advanced Graphing")
.

setZCoordinateUnit(BaseUnit) - Method in interface nxopen.cae.ftk.SectionBasedMatrixRecord

License requirements: nx_ftk ("NX Advanced Graphing")
.

setZCurve(MotionFunction) - Method in interface nxopen.motion.RoadBuilder

License requirements: mechanisms ("MECHANISMS")
.

setZCurve(MotionFunction) - Method in interface nxopen.motion.SegmentBuilder

License requirements: mechanisms ("MECHANISMS")
.

setZDatumFilter(ShipSectionBuilder.ZFilter) - Method in interface nxopen.features.shipdesign.ShipSectionBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_detail ("Ship Detail Design")
.

setZdepthOffset(double) - Method in interface nxopen.cam.PlanarMillingBuilder

License requirements: cam_base ("CAM BASE")
.

setZDirection(ShipCoordinatesBuilder.ZDirectionType) - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design") OR routing_base ("Routing Basic")
.

setZDistance(double) - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design") OR routing_base ("Routing Basic")
.

setZDistanceBuilder(double) - Method in interface nxopen.cam.MachineHeadGroupBuilder

License requirements: cam_base ("CAM BASE")
.

setZEnabled(boolean) - Method in interface nxopen.geometricanalysis.sectionanalysis.XYZPlaneBuilder

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setZeroDisplay(TableCellStyleBuilder.ZeroDisplayType) - Method in interface nxopen.annotations.TableCellStyleBuilder

License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.

setZeroMeanCorrection(boolean) - Method in interface nxopen.cae.responsesimulation.EvaluationParameters

License requirements: nx_response_anlys ("NX Response Analysis")
.

setZeroSlopeRadiusFunctionAtChainEnds(boolean) - Method in interface nxopen.features.EdgeBlendBuilder

License requirements: solid_modeling ("SOLIDS MODELING")
.

setZeroThicknessColor(NXColor) - Method in interface nxopen.cae.ThicknessBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setZeroToleranceDisplayStyle(ZeroToleranceDisplayStyle) - Method in interface nxopen.annotations.AngularTolerance

License requirements: None.

setZeroToleranceDisplayStyle(ZeroToleranceDisplayStyle) - Method in interface nxopen.annotations.DimensionPreferences

Deprecated.

Deprecated in NX7.5.0. Use LinearTolerance.setZeroToleranceDisplayStyle(nxopen.annotations.ZeroToleranceDisplayStyle) for linear dimensions and AngularTolerance.setZeroToleranceDisplayStyle(nxopen.annotations.ZeroToleranceDisplayStyle) for angular dimensions instead.

setZeroToleranceDisplayStyle(ZeroToleranceDisplayStyle) - Method in interface nxopen.annotations.LinearTolerance

License requirements: None.

setZFrameEnum(ShipIntersectionsBuilder.Type) - Method in interface nxopen.features.shipdesign.ShipIntersectionsBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.

setZFrameOption(String) - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder

License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design") OR routing_base ("Routing Basic")
.

setZFunction(Function) - Method in interface nxopen.motion.BushingGeneralCoefficientsComponent

License requirements: mechanisms ("MECHANISMS")
.

setZFunction(Function) - Method in interface nxopen.motion.VObject

License requirements: mechanisms ("MECHANISMS")
.

setZigZagDir(UFVariant, UFDrpos.ZigZagDir) - Method in interface nxopen.uf.UFDrpos

Refer to UF_DRPOS_set_zig_zag_dir for documentation.

setZMaxDatumFilter(int) - Method in interface nxopen.features.shipdesign.ShipSectionBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_detail ("Ship Detail Design")
.

setZMinDatumFilter(int) - Method in interface nxopen.features.shipdesign.ShipSectionBuilder

License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_detail ("Ship Detail Design")
.

setZoffset(double) - Method in interface nxopen.cam.RotateToolMoveBuilder

License requirements: None.

setZoffset(int, double) - Method in interface nxopen.cam.ToolTrackingPointBuilder

Set the Z offset
License requirements: None.

setZoffsetState(ShellEADBuilder.State) - Method in interface nxopen.cae.ShellEADBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setZoffsetToggle(boolean) - Method in interface nxopen.cam.RotateToolMoveBuilder

License requirements: None.

setZoffsetToggle(boolean) - Method in interface nxopen.cam.ToolChangeCiBuilder

License requirements: cam_base ("CAM BASE")
.

setZoffsetToggle(int, boolean) - Method in interface nxopen.cam.ToolTrackingPointBuilder

Set the Z offset Toggle Status
License requirements: None.

setZonePoint(Point3d) - Method in interface nxopen.features.AssociativeArcBuilder

License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.

setZoneShape(FeatureControlFrameDataBuilder.ToleranceZoneShape) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder

License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.

setZoneShapeType(SearchCriteriaFeatureControlFrameBuilder.ZoneShapeOptions) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

License requirements: None.

setZoomScale(double) - Method in interface nxopen.geometricanalysis.FaceAnalysisDataRangeBuilder

License requirements: None.

setZoomSensitivity(int) - Method in interface nxopen.display.NonProportionalZoom

License requirements: studio_analyze ("STUDIO ANALYZE")
.

setZOption(boolean) - Method in interface nxopen.cae.NodeModifyLocationBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setZOutput(boolean) - Method in interface nxopen.cam.AlongMachineAxisMoveBuilder

License requirements: None.

setZRotationDOFMode(InspectionMethodBuilder.ToleranceDegreeOfFreedomMode) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setZRotationLowerLimit(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setZRotationUpperLimit(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setZScaleFactor(double) - Method in interface nxopen.cae.NodeTranslateBuilder

License requirements: nx_masterfem ("Finite Element Modeling")
.

setZSegments(int) - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilderEx

License requirements: nx_subdivision (" NX SUBDIVISION")
.

setZtDatumLetter(String) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setZtDistance(double) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setZtFeature(String) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setZtMethod(InspectionAlignmentBuilder.ZtMethods) - Method in interface nxopen.cam.InspectionAlignmentBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setZTranslationDOFMode(InspectionMethodBuilder.ToleranceDegreeOfFreedomMode) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setZTranslationLowerLimit(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setZTranslationUpperLimit(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

License requirements: insp_programming ("INSPECTION PROGRAMMING")
.

setZValue(double) - Method in interface nxopen.motion.BushingGeneralCoefficientsComponent

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using Motion.BushingGeneralCoefficientsComponent#zexpression to query or edit it.

setZxGridStyle(GridStyle) - Method in interface nxopen.cae.xyplot.GridLayoutStyle3DSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

setZyGridStyle(GridStyle) - Method in interface nxopen.cae.xyplot.GridLayoutStyle3DSetting

License requirements: nx_ftk ("NX Advanced Graphing")
.

SEVEN - Static variable in class nxopen.annotations.AutomaticCenterlineBuilder.CenterlineThickness

Width Seven

SEVEN - Static variable in class nxopen.annotations.CenterlineSettingsBuilder.CenterlineThickness

Width Seven

SEVEN - Static variable in class nxopen.annotations.IntersectionSymbolBuilder.Thickness

Width Seven

SEVEN - Static variable in class nxopen.annotations.LineWidth

Width Seven

SEVEN - Static variable in class nxopen.annotations.OffsetCenterPointBuilder.Thickness

Width Seven

SEVEN - Static variable in class nxopen.annotations.TargetPointBuilder.Thickness

Width Seven

SEVEN - Static variable in class nxopen.cae.ModelDisplayBuilder.FreeEdgeWidth

SEVEN - Static variable in class nxopen.cae.ModelDisplayBuilder.RotationAxisWidth

SEVEN - Static variable in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeWidth

SEVEN - Static variable in class nxopen.die.SpringbackCompensationBuilder.DegreeType

Degree is 7

SEVEN - Static variable in class nxopen.display.GridBuilder.LineWeightType

SEVEN - Static variable in class nxopen.DisplayableObject.ObjectWidth

SEVEN - Static variable in class nxopen.drawings.CustomViewSettingsBuilder.Width

Seven

SEVEN - Static variable in class nxopen.drawings.DrawingCompareSettingsBuilder.WidthType

Deprecated.

Width Seven

SEVEN - Static variable in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Width

SEVEN - Static variable in class nxopen.geometricanalysis.FaceAnalysisDisplayBuilder.ColorsOptions

Display in 7 colors.

SEVEN - Static variable in class nxopen.preferences.ViewVisualizationVisual.SmoothEdgeWidth

SEVEN - Static variable in class nxopen.preferences.Width

Width Seven

SEVEN - Static variable in class nxopen.ViewDependentDisplayManager.Width

SEVENTH - Static variable in class nxopen.weld.WeldGroupIdColor

Seventh Group Id Color Index

severityOption() - Method in interface nxopen.validate.RequirementBuilder

Returns the severity option
License requirements: None.

sew() - Method in interface nxopen.AcisImporter

Returns the Sew - if value set to true then automatic sewing will be done
License requirements: None.

SEW - Static variable in class nxopen.features.PatchOpeningsBuilder.OutputTypes

Sew patch sheet bodies into target sheet body

Sew - Interface in nxopen.features

Represents a sew feature.

SEW - Static variable in class nxopen.geometricutilities.BooleanOperation.BooleanType

Sew

sewAllFaces() - Method in interface nxopen.features.FaceBlendBuilder

Returns the sew option for face blend
License requirements: None.

sewAllInstances() - Method in interface nxopen.features.SewBuilder

Deprecated.

Deprecated in NX9.0.0. This is for pre NX8 usage; new features cannot be created by using this option in NX8 or later, it is safe to remove this call for post-NX8.

SewBuilder - Interface in nxopen.features

Represents a Sew builder.

SewBuilder.Types - Class in nxopen.features

Specifies the sew type.

SewFacetBodyBuilder - Interface in nxopen.facet

Represents a SewFacetBodyBuilder It sews two touching NX facet bodies.

SewFacetBodyBuilder.Input - Class in nxopen.facet

Represents the option for keeping, deleting or hiding input two facet bodies after builder committing

SewFacetBodyBuilder.VertexIndex - Class in nxopen.facet

Index of the vertex

sewId - Variable in class nxopen.uf.UFModeling.CreateSewData

sewList - Variable in class nxopen.uf.UFModeling.CreateMultipleSewsData

sewn() - Method in interface nxopen.die.AddSurfBuilder

Returns the flag that indicates whether the faces of the addendum sheet body will be sewn into one sheet body or individual sheet bodies for each face will be output.

sewSurfaces() - Method in interface nxopen.IgesImporter

Returns the sew surfaces - set this to true if automatic sewing of surfaces is desired
License requirements: None.

sewSurfaces() - Method in interface nxopen.Step203Importer

Returns the sew surfaces - if set to true surfaces will be sewed automatically
License requirements: None.

sewSurfaces() - Method in interface nxopen.Step214Importer

Returns the sew surfaces - if set to true surfaces will be sewed automatically
License requirements: None.

sewSurfaces() - Method in interface nxopen.Step242Importer

Returns the sew surfaces - if set to true surfaces will be sewed automatically
License requirements: None.

sewToBody() - Method in interface nxopen.features.BlendCornerBuilder

Returns the sew to body
License requirements: None.

sewTolerance() - Method in interface nxopen.tooling.DieEngStampingOutputBuilder

Returns the sew tolerance
License requirements: None.

sewTolerance() - Method in interface nxopen.tooling.MWDefineSheetsBuilder

Returns the sew tolerance for sewing sheets
License requirements: None.

sewWaveLinkedFaceAndGuidedExtensionSheet() - Method in interface nxopen.tooling.SpecialFormingBuilder

Sew wave linked face and guided extension sheet.

sf() - Method in interface nxopen.UFSession

Sf1dMeshData() - Constructor for class nxopen.uf.UFSf.Sf1dMeshData

Sf1dMeshData(UFSf.Sf1dElementType, UFSf.Sf1dDensityType, double, int, double) - Constructor for class nxopen.uf.UFSf.Sf1dMeshData

sfCurve() - Method in interface nxopen.UFSession

SFEM_PART_OPEN_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId

sfl() - Method in interface nxopen.UFSession

SFLANGE_ABSOLUTE_GAP - Static variable in class nxopen.uf.UFModl.SflangeType

SFLANGE_BASIC - Static variable in class nxopen.uf.UFModl.SflangeType

SFLANGE_CONTINUITY_G0 - Static variable in class nxopen.uf.UFModl.SflangeContinuity

SFLANGE_CONTINUITY_G1 - Static variable in class nxopen.uf.UFModl.SflangeContinuity

SFLANGE_CONTINUITY_G2 - Static variable in class nxopen.uf.UFModl.SflangeContinuity

SFLANGE_DIR_NORMAL - Static variable in class nxopen.uf.UFModl.SflangeDir

SFLANGE_DIR_NORMAL_DRAFT - Static variable in class nxopen.uf.UFModl.SflangeDir

SFLANGE_DIR_VECTOR - Static variable in class nxopen.uf.UFModl.SflangeDir

SFLANGE_DIR_VECTOR_DRAFT - Static variable in class nxopen.uf.UFModl.SflangeDir

SFLANGE_HEM_TYPE - Static variable in class nxopen.features.sheetmetal.HemFlangeBuilder.TypeOptions

SFLANGE_NO_SEW - Static variable in class nxopen.uf.UFModl.SflangeTrim

SFLANGE_NO_TRIM - Static variable in class nxopen.uf.UFModl.SflangeTrim

SFLANGE_NO_TRIM_SEW - Static variable in class nxopen.uf.UFModl.SflangeTrim

SFLANGE_TRIM_SEW - Static variable in class nxopen.uf.UFModl.SflangeTrim

SFLANGE_VISUAL_GAP - Static variable in class nxopen.uf.UFModl.SflangeType

sfLegend() - Method in interface nxopen.UFSession

sfPost() - Method in interface nxopen.UFSession

SgrpCoordinatesData() - Constructor for class nxopen.HumanPosturePredictionBuilder.SgrpCoordinatesData

sgRPHeight() - Method in interface nxopen.features.vehicledesign.ManikinBuilder

Returns the SgRP height
License requirements: None.

sgRPLength() - Method in interface nxopen.features.vehicledesign.ManikinBuilder

Returns the SgRP length
License requirements: None.

sgrpPoint() - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder

Returns the SgRp point
License requirements: None.

sgRPWidth() - Method in interface nxopen.features.vehicledesign.ManikinBuilder

Returns the SgRP width
License requirements: None.

sgrpXvalDim() - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder

Returns the dimension expression for the X coordinate of SgRp
License requirements: None.

sgrpYvalDim() - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder

Returns the dimension expression for the Y coordinate of SgRp
License requirements: None.

sgrpZvalDim() - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder

Returns the dimension expression for the Z coordinate of SgRp
License requirements: None.

sGuide - Variable in class nxopen.uf.UFModlFeatures.AskSweepData

SH1 - Static variable in class nxopen.tooling.AssemblyDrawingBuilder.DrawingCreateOrEdit

SH1 - Static variable in class nxopen.tooling.EWDraftingBuilder.NameOption

sh1 sheet name

SH2 - Static variable in class nxopen.tooling.EWDraftingBuilder.NameOption

sh2 sheet name

SHADED - Static variable in class nxopen.cae.ModelDisplayBuilder.ElemQualPass

Draw passing elements shaded

SHADED - Static variable in class nxopen.cae.Post.LimitDisplay

SHADED - Static variable in class nxopen.cae.xyplot.BarColorOption

Fill Color or contour color with shading

SHADED - Static variable in class nxopen.cae.xyplot.PlateColorOption

Fill Color with shading

SHADED - Static variable in class nxopen.cae.xyplot.SurfaceColorOption

Fill Color or contour color with shading

SHADED - Static variable in class nxopen.display.PointCloudBuilder.BrightnessModes

Shaded

SHADED - Static variable in class nxopen.drawings.ViewSettingsBuilder.RenderingStyleEnum

SHADED - Static variable in class nxopen.drawings.ViewWorkflowBuilder.Style

SHADED - Static variable in class nxopen.preferences.PartDrafting.ViewStyleType

Shaded

SHADED - Static variable in class nxopen.preferences.ViewVisualizationVisual.RenderingStyle

SHADED - Static variable in class nxopen.PrintBuilder.OutputOption

Shaded with Original Background

SHADED - Static variable in class nxopen.View.RenderingStyleType

SHADED_EDGE_COLOR - Static variable in class nxopen.preferences.ViewVisualizationVisual.ShadedEdgeStyleType

SHADED_EDGE_STYLE_BODY_COLOR - Static variable in class nxopen.uf.UFView.ShadedEdgeStyle

SHADED_EDGE_STYLE_OFF - Static variable in class nxopen.uf.UFView.ShadedEdgeStyle

SHADED_EDGE_STYLE_SHADED_EDGE_COLOR - Static variable in class nxopen.uf.UFView.ShadedEdgeStyle

SHADED_STYLE - Static variable in class nxopen.uf.UFView.RenderingStyle

SHADED_WITH_BODY_COLOR_EDGES - Static variable in class nxopen.View.RenderingStyleType

SHADED_WITH_EDGES - Static variable in class nxopen.View.RenderingStyleType

shadedAlignFacets() - Method in interface nxopen.display.FacetSettingsBuilder

Returns the state of whether facets for shaded views should be aligned along common edges.

shadedCutFaceColor() - Method in interface nxopen.drawings.ShadingViewStyle

Returns the shaded cut face color.

shadedCutFaceColor() - Method in interface nxopen.preferences.ShadingViewPreferences

Returns the shaded cut face color.

shadedDisplay() - Method in interface nxopen.annotations.PmiPreferences

Returns the toggle for display through shaded models
License requirements: None.

shadedEdgeColor() - Method in interface nxopen.cae.MeshCollectorDisplayDefaults2d

Returns the element shaded edge color.

shadedEdgeColor() - Method in interface nxopen.cae.MeshCollectorDisplayDefaults3d

Returns the element shaded edge color.

shadedEdgeColor() - Method in interface nxopen.cae.MeshDisplaySettings2d

Returns the element shaded edge color.

shadedEdgeColor() - Method in interface nxopen.cae.MeshDisplaySettings3d

Returns the element shaded edge color.

shadedEdgeColor() - Method in interface nxopen.preferences.ViewVisualizationVisual

Returns the edge color for shaded faces in the view.

shadedEdgeColor - Variable in class nxopen.uf.UFView.ShadedEdgeOptions

ShadedEdgeOptions() - Constructor for class nxopen.uf.UFView.ShadedEdgeOptions

ShadedEdgeOptions(UFView.ShadedEdgeStyle, int, UFView.HiddenEdgeStyle) - Constructor for class nxopen.uf.UFView.ShadedEdgeOptions

shadedEdgeStyle() - Method in interface nxopen.preferences.ViewVisualizationVisual

Returns the edge display style for shaded faces in the view.

shadedEdgeStyle - Variable in class nxopen.uf.UFView.ShadedEdgeOptions

shadedFacetRatio() - Method in interface nxopen.display.FacetSettingsBuilder

Deprecated.

Deprecated in NX9.0.0. Refer to FacetSettingsBuilder.shadedRefinementFactor() instead

shadedFacetScale() - Method in interface nxopen.display.FacetSettingsBuilder

Returns the facet scale to use for Shaded Views
License requirements: None.

shadedFacetScaleRatio() - Method in interface nxopen.preferences.PartVisualizationShade

Deprecated.

Deprecated in NX9.0.0. Refer to Display.FacetSettingsBuilder#shadedRefinementFactor instead

shadedFacetToViewRatio() - Method in interface nxopen.display.FacetSettingsBuilder

Deprecated.

Deprecated in NX9.0.0. Refer to FacetSettingsBuilder.shadedFacetScale() instead

shadedFacetToViewScale() - Method in interface nxopen.preferences.PartVisualizationShade

Deprecated.

Deprecated in NX9.0.0. Refer to Display.FacetSettingsBuilder#shadedFacetScale instead

shadedGeometry() - Method in interface nxopen.CGMBuilder

Returns the Shaded Geometry as Wireframe option.

shadedGeometry() - Method in interface nxopen.PlotBuilder

Returns the shaded geometry as wireframe option.

shadedGeometry() - Method in interface nxopen.PrintBuilder

Returns the shaded geometry as wireframe option.

shadedGeometry() - Method in interface nxopen.PrintPDFBuilder

Returns the Shaded Geometry as Wireframe option.

shadedPlane() - Method in interface nxopen.annotations.CuttingPlaneSymbolBuilder

Returns the shaded plane
License requirements: None.

shadedRefinementFactor() - Method in interface nxopen.display.FacetSettingsBuilder

Returns the refinement factor to use for Shaded Views
License requirements: None.

shadedTolerance() - Method in interface nxopen.display.FacetSettingsBuilder

Returns the tolerance setting to use for Shaded Views
License requirements: None.

shadedUpdate() - Method in interface nxopen.display.FacetSettingsBuilder

Returns the update mode to use for Shaded Views
License requirements: None.

shadedViewAngleTolerance() - Method in interface nxopen.preferences.PartVisualizationShade

Deprecated.

Deprecated in NX8.0.0. Use PartVisualizationShade.getShadedViewFacetTolerances(nxopen.preferences.PartVisualizationShade.ShadedViewToleranceType) and PartVisualizationShade.setShadedViewFacetTolerances(nxopen.preferences.PartVisualizationShade.ShadedViewToleranceType, double, double, double) instead.

shadedViewEdgeTolerance() - Method in interface nxopen.preferences.PartVisualizationShade

Deprecated.

Deprecated in NX8.0.0. Use PartVisualizationShade.getShadedViewFacetTolerances(nxopen.preferences.PartVisualizationShade.ShadedViewToleranceType) and PartVisualizationShade.setShadedViewFacetTolerances(nxopen.preferences.PartVisualizationShade.ShadedViewToleranceType, double, double, double) instead.

shadedViewFaceTolerance() - Method in interface nxopen.preferences.PartVisualizationShade

Deprecated.

Deprecated in NX8.0.0. Use PartVisualizationShade.getShadedViewFacetTolerances(nxopen.preferences.PartVisualizationShade.ShadedViewToleranceType) and PartVisualizationShade.setShadedViewFacetTolerances(nxopen.preferences.PartVisualizationShade.ShadedViewToleranceType, double, double, double) instead.

ShadedViewFacetTolerancesData() - Constructor for class nxopen.preferences.PartVisualizationShade.ShadedViewFacetTolerancesData

shadedViewsType() - Method in interface nxopen.display.SelPref

Returns the shaded views type
License requirements: None.

shadedViewTolerance() - Method in interface nxopen.preferences.PartVisualizationShade

Returns the tolerance for shaded views.

shadedViewUpdateMode() - Method in interface nxopen.preferences.PartVisualizationShade

Returns the update mode for shaded views.

shadeEdgeColor - Variable in class nxopen.uf.UFSf.MeshVisuals

shadeGraphicSymbol() - Method in interface nxopen.cae.CaeDOFSetDisplay

Returns the flag indicating whether or not shading of graphic symbols is required
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

shadeGraphicSymbol() - Method in interface nxopen.cae.SimBCDisplay

Returns the flag indicating whether or not shading of graphic symbols is required
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

shadeMode - Variable in class nxopen.uf.UFSf.MeshVisuals

ShadeOptions() - Constructor for class nxopen.uf.UFDisp.ShadeOptions

ShadeOptions(UFDisp.ShadeFormat, UFDisp.ShadeDisplay, int, UFDisp.ShadePlot, boolean, double, boolean, boolean, boolean, int, int, int, int, boolean, boolean) - Constructor for class nxopen.uf.UFDisp.ShadeOptions

shadeSymbols() - Method in interface nxopen.cae.MeshControlDisplayOptionsBuilder

Returns the shade symbols
License requirements: None.

shadeTolerance() - Method in interface nxopen.drawings.ViewStyleShadingBuilder

Returns the shade tolerance option on the SHADING tab of the View Style Dialog
License requirements: None.

shadeVisualization() - Method in interface nxopen.preferences.PartPreferences

Returns object for doing Visualization preferences settings for shade tab applicable to displayed part .

shading() - Method in interface nxopen.drawings.ViewStyle

Returns object for doing View style settings applicable to Shading .

shading() - Method in interface nxopen.preferences.ViewPreferences

Returns object for doing View Preferences settings applicable to Shading .

ShadingRenderingStyleOption - Class in nxopen.preferences

Represents the rendering style options

shadingTolerance() - Method in interface nxopen.drawings.ShadingViewStyle

Returns the shading tolerance.

shadingTolerance() - Method in interface nxopen.preferences.ShadingViewPreferences

Returns the shading tolerance.

ShadingToleranceOption - Class in nxopen.preferences

Represents the Shade tolerance options

ShadingViewPreferences - Interface in nxopen.preferences

Represents set of Shading View Preferences applicable to drafting views.

ShadingViewStyle - Interface in nxopen.drawings

Represents set of Shading View style applicable to drafting views.

SHADOW_CATCHER - Static variable in class nxopen.display.Wall.MaterialTextureType

The wall is transparent, and is used to display shadows.

SHADOW_CATCHER - Static variable in class nxopen.display.Wall.MaterialType

Deprecated.

The wall is transparent, and is used to display shadows.

shadowCastingDisabled() - Method in interface nxopen.display.CgfxMattexBuilder

Deprecated.

Deprecated in NX10.0.0. No alternative provided for this class.

shadowCatcherSelection() - Method in interface nxopen.display.Shadows

Returns the Shadow Catcher Selection
License requirements: None.

shadowCurveCount - Variable in class nxopen.uf.UFCurve.CreateShadowCurvesData

shadowCurves - Variable in class nxopen.uf.UFCurve.CreateShadowCurvesData

shadowGenerationSeconds - Variable in class nxopen.ModelingViewHighQualityImage.ImageCountsData

Number of seconds to generate the shadows

Shadows - Interface in nxopen.display

Represents a Shadows
This class is restricted to being called from a program running during an Interactive NX session.

shadows() - Method in interface nxopen.ModelingViewHighQualityImage

Returns the setting for whether the High Quality Image is to contain shadows
License requirements: None.

Shadows.RealTimeState - Class in nxopen.display

Real time type settings - environment_shadow_catcher_only is enabled only in Basic Studio mode

Shadows.SsaoContrastType - Class in nxopen.display

Shadows SSAO contrast settings

Shadows.SsaoQualityType - Class in nxopen.display

Shadows SSAO quality settings

shadowsEnabled() - Method in interface nxopen.display.Shadows

Returns the Overall Shadows
License requirements: None.

shadowSoftness() - Method in interface nxopen.display.ImageBasedLighting

Returns the image-based lighting shadow softness
License requirements: None.

shadowType() - Method in interface nxopen.display.ImageBasedLighting

Returns the shadow type
License requirements: None.

SHAFT - Static variable in class nxopen.annotations.FitAnsiHoleType

Use shaft values for the ANSI limit and fit tolerance

SHAFT_SIZE - Static variable in class nxopen.annotations.HoleCalloutSettingsBuilder.Parametertype

shaftLowerToleranceValue() - Method in interface nxopen.annotations.Dimension

Returns a setting to control the shaft lower tolerance value of a dimension.

shaftUpperToleranceValue() - Method in interface nxopen.annotations.Dimension

Returns a setting to control the shaft upper tolerance value of a dimension.

shallowCorner() - Method in interface nxopen.cam.TurnCutParameters

Returns the corner shallow
License requirements: cam_base ("CAM BASE")
.

shankClearance() - Method in interface nxopen.cam.CutParameters

Returns the Shank Clearance
License requirements: None.

shankClearance() - Method in interface nxopen.cam.ToolPathSplitBuilder

Returns the Shank Clearance
License requirements: None.

shankElementType() - Method in interface nxopen.cae.BoltBuilder

Returns the element type to be created for the shank
License requirements: None.

shankShape() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder

Returns the shank shape.

shanksToDelete() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder

Returns the faces of those to be deleted shanks.

shanksToDelete() - Method in interface nxopen.tooling.InsertEditToolsBuilder

Returns the shanks to delete
License requirements: None.

SHAPE - Static variable in class nxopen.assemblies.DesignElementBuilder.StateType

Shape design element

shape() - Method in interface nxopen.cae.FEElement

Returns the element shape
License requirements: None.

shape() - Method in interface nxopen.cam.BoundaryTurnMemberCorner

Returns the corner shape
License requirements: None.

shape() - Method in interface nxopen.features.sheetmetal.GussetBuilder

Returns the shape
See GussetBuilder.Shapes for details.

shape() - Method in interface nxopen.features.vehicledesign.WheelFixingBuilder

Returns the wheel fixing shape.

SHAPE - Static variable in class nxopen.pdm.DesignElementRevision.DesignElementCategory

shape() - Method in interface nxopen.tooling.ElectrodeBlankBuilder

Returns the shape of the blank.

shape - Variable in class nxopen.uf.UFPath.CircularMotion

shape - Variable in class nxopen.uf.UFPath.HelicalMotion

SHAPE_CIRCULAR_CCW - Static variable in class nxopen.uf.UFPath.Shape

SHAPE_CIRCULAR_CW - Static variable in class nxopen.uf.UFPath.Shape

SHAPE_CURVE - Static variable in class nxopen.features.BridgeCurveBuilder.ShapeControlTypes

Deprecated.

shape curve

SHAPE_CYLINDRICAL - Static variable in class nxopen.uf.UFGdt.ZoneShape

SHAPE_DESIGN_ELEMENT - Static variable in class nxopen.assemblies.CollaborativeContentType

Shape Design Element in a Workset

SHAPE_DESIGN_ELEMENT - Static variable in class nxopen.BasePart.CollaborativeContentType

Shape Design Part in a Workset

SHAPE_DESIGN_ELEMENT - Static variable in class nxopen.issue.IssueAttachment.Type

Shape Design Element type

SHAPE_FACTOR - Static variable in class nxopen.cae.modelcheck.TestValueTypes.TestType

SHAPE_HELICAL_CCW - Static variable in class nxopen.uf.UFPath.Shape

SHAPE_HELICAL_CW - Static variable in class nxopen.uf.UFPath.Shape

SHAPE_LAST_ELEMENT - Static variable in class nxopen.uf.UFPath.Shape

SHAPE_LINEAR - Static variable in class nxopen.uf.UFPath.Shape

SHAPE_OFFSET - Static variable in class nxopen.uf.UFGdt.ZoneShape

SHAPE_PLANAR - Static variable in class nxopen.uf.UFGdt.ZoneShape

SHAPE_SPHERICAL - Static variable in class nxopen.uf.UFGdt.ZoneShape

shapeControl() - Method in interface nxopen.features.OvercrownBuilder

Returns the shape control parameter.

shapeControl() - Method in interface nxopen.features.StyledBlendBuilder

Returns the shape control
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

shapeControl - Variable in class nxopen.uf.UFModl.StycornerCrvOpt

shapeControl1 - Variable in class nxopen.uf.UFCurve.BridgeData

shapeControl2 - Variable in class nxopen.uf.UFCurve.BridgeData

shapeControlFirstCurve() - Method in interface nxopen.features.CircularBlendCurveBuilder

Returns the shape control for first curve, specifies how quickly the circular blend curve deviates from the first curve.

shapeControlMethod() - Method in interface nxopen.features.BridgeCurveBuilderEx

Returns the shape control method
License requirements: None.

shapeControlOption() - Method in interface nxopen.features.BridgeCurveBuilder

Deprecated.

Deprecated in NX8.5.0. Use BridgeCurveBuilderEx instead.

shapeControlSecondCurve() - Method in interface nxopen.features.CircularBlendCurveBuilder

Returns the shape control for second curve, specifies how quickly the circular blend curve deviates from the second curve.

shapeControlType() - Method in interface nxopen.features.FillHoleBuilder

Returns the shape control type
License requirements: None.

shapeCurve() - Method in interface nxopen.features.BridgeCurveBuilder

Deprecated.

Deprecated in NX8.5.0. Use BridgeCurveBuilderEx instead.

ShapeData() - Constructor for class nxopen.die.PadChildBuilder.ShapeData

shapeDetail() - Method in interface nxopen.tooling.DieEngFormTaskBuilder

Returns the shape detail selection.

ShapeFrameBuilder - Interface in nxopen.geometricutilities

Represents a ShapeFrameBuilder
Created in NX6.0.0

ShapeFrameBuilder.AnchorAttachmentType - Class in nxopen.geometricutilities

Represents the anchor attachment type

shapeHighlight() - Method in interface nxopen.mechatronics.PreferencesBuilder

Returns the shape highlight on collsion.

shapeMatch() - Method in interface nxopen.features.ReplaceBlendBuilder

Returns the shape match.

SHAPEMEMORYALLOY - Static variable in class nxopen.PhysicalMaterial.Type

Shape Memory Alloy

ShapeMetricViewerBuilder - Interface in nxopen.cae

Represents the correlation Shape metrics viewer builder
To create a new instance of this class, use CorrelSolutionCollection.createShapeMetricViewerBuilder(nxopen.cae.CorrelSolution)

Created in NX7.5.0

shapeOption() - Method in interface nxopen.features.AestheticFaceBlendBuilder

Deprecated.

Deprecated in NX8.0.0. Use Features.AestheticFaceBlendBuilder#isAccelerated instead.

shapeParameter - Variable in class nxopen.optimization.DesignStudyBuilder.DesignStudyVariable

Shape parameter

ShapePatternClientDialogData() - Constructor for class nxopen.uf.UFModl.ShapePatternClientDialogData

ShapePatternClientDialogData(String, String, int, String[], String[], String[], int, String[], String[], String[], String, String, String, int, boolean) - Constructor for class nxopen.uf.UFModl.ShapePatternClientDialogData

shapePatternCreateDialog(UFModl.ShapePatternClientDialogData) - Method in interface nxopen.uf.UFModlUi

Refer to UF_MODL_shape_pattern_create_dialog for documentation.

ShapePatternCreateDialogData() - Constructor for class nxopen.uf.UFModlUi.ShapePatternCreateDialogData

shapePatternFreeClientData(UFModl.ShapePatternClientDialogData) - Method in interface nxopen.uf.UFModlUi

Refer to UF_MODL_shape_pattern_free_client_data for documentation.

shapePatternInitClientData(UFModl.ShapePatternClientDialogData) - Method in interface nxopen.uf.UFModlUi

Refer to UF_MODL_shape_pattern_init_client_data for documentation.

shapeProperties() - Method in interface nxopen.mechatronics.CollisionSensorBuilder

Returns the trigger shape option.

shapeReset() - Method in interface nxopen.features.StudioXformBuilder

Deprecated.

Deprecated in NX8.5.0. Use StudioXformBuilderEx instead.

ShapeSearchBuilder - Interface in nxopen.shapesearch

This class provides the methods to execute shape search and get the searched results.

ShapeSearchBuilder.ExecuteSearchData - Class in nxopen.shapesearch

This class holds the data returned from ShapeSearchBuilder.executeSearch(boolean, java.lang.String)

ShapeSearchBuilder.OpenPartType - Class in nxopen.shapesearch

The open part type enum

ShapeSearchBuilder.SearchByType - Class in nxopen.shapesearch

The search type enum

ShapeSearchBuilder.ShapeSimilarity - Class in nxopen.shapesearch

The search shape similarity enum

ShapeSearchBuilder.ShapeSize - Class in nxopen.shapesearch

The search shape size enum

shapeSearchManager() - Method in interface nxopen.PartCollection

The SearchManager that manages shape search in this session
Created in NX6.0.0

ShapeSegmentBuilder - Interface in nxopen.formboard

Builder for Face Annotation functionality used in formboard.

ShapeSegmentBuilder.LineData - Class in nxopen.formboard

This class holds the data returned from ShapeSegmentBuilder.getLineData()

shapeSkew() - Method in interface nxopen.geometricutilities.ConicCrossSection

Returns the shape skew expression for the conic section with face blend
License requirements: None.

shapeSkewLawControl() - Method in interface nxopen.geometricutilities.ConicCrossSection

Returns the Shape Skew Law builder
License requirements: None.

shapeSkewOption() - Method in interface nxopen.geometricutilities.ConicCrossSection

Returns the shape skew option for the conic section with face blend
License requirements: None.

shapeType() - Method in interface nxopen.cam.LaserProfileMove

Returns the Shape Type
License requirements: None.

shapeType() - Method in interface nxopen.die.PadChildBuilder

Returns the shape type of the die pad.

shapeType() - Method in interface nxopen.die.PadParentBuilder

Returns the shape type of die pads.

shapeType() - Method in interface nxopen.die.PierceHoleChildBuilder

Returns the pierce hole shape type
License requirements: ug_die_design ("Die Design")
.

shapeValue() - Method in interface nxopen.die.SpringbackCompensationBuilder

Returns the parameter that determines the shape of the transition area.

SHARE - Static variable in class nxopen.preferences.SessionModeling.ShareGeometriesOnSaveType

sharedBodyInput() - Method in interface nxopen.geometricutilities.PartModuleInputBuilder

Returns the bodies for part module shared body
License requirements: None.

shareGeometriesOption() - Method in interface nxopen.preferences.SessionModeling

Returns the option " Share Geometry on Save " gives choice of whether to share geometries among Parasolid solid entities on save or not
License requirements: None.

sharePath - Variable in class nxopen.uf.UFRoute.AskSegmentsPathsData

SHARP - Static variable in class nxopen.cam.IpwAnalysisBuilder.ColorControl

use blend color control

SHARP - Static variable in class nxopen.features.LawExtensionBuilderEx.MiterOptions

Creates a sharp edge between two faces

SHARP - Static variable in class nxopen.features.subdivision.SubdivisionBridgeFaceBuilder.ContinuityType

Sharp continuity

SHARP - Static variable in class nxopen.features.subdivision.SubdivisionConnectCageBuilder.ContinuityTypes

SHARP - Static variable in class nxopen.features.subdivision.SubdivisionExtrudeCageBuilder.ContinuityType

Sharp continuity

SHARP - Static variable in class nxopen.features.subdivision.SubdivisionFillBuilder.ContinuityType

Sharp continuity

SHARP - Static variable in class nxopen.features.subdivision.SubdivisionLoftBuilder.ContinuityType

Sharp continuity

SHARP - Static variable in class nxopen.features.subdivision.SubdivisionRevolveBuilder.ContinuityType

Sharp continuity

SHARP - Static variable in class nxopen.features.subdivision.SubdivisionSetContinuityBuilder.ContinuityTypes

SHARP - Static variable in class nxopen.features.subdivision.SubdivisionSweepBuilder.ContinuityType

Sharp continuity

SHARP - Static variable in class nxopen.features.WrapGeometryBuilder.CloseGapType

SHARP - Static variable in class nxopen.geometricanalysis.FaceAnalysisDisplayBuilder.ColorLegendOptions

Sharp color display.

SHARP - Static variable in class nxopen.sim.SinumerikCaSimplifyBodiesBuilder.CloseGapTypes

Sharp

SHARP - Static variable in class nxopen.tooling.WallThicknessCheckerBuilder.LegendControl

Sharp

SHARP_CORNERS - Static variable in class nxopen.tooling.MWMoldedPartValidationBuilder.CheckScope

sharp corners

SHARP_GRAY_SCALE - Static variable in class nxopen.geometricanalysis.ReflectionAnalysisBuilder.SceneImageType

Sharp gray scale.

sharpEdgeLineFont() - Method in interface nxopen.preferences.SubdivisionModelingPreferences

Returns the sharp edge line font.

shear() - Method in interface nxopen.geometricutilities.RectangularFrameBuilder

Returns the shear
License requirements: None.

SHEAR_CONTACT_FORCE - Static variable in class nxopen.cae.Result.Quantity

SHEAR_S - Static variable in class nxopen.cae.Result.Component

SHEAR_STRESS_ON_NEGATIVE_SIDE - Static variable in class nxopen.cae.Result.Quantity

SHEAR_STRESS_ON_POSITIVE_SIDE - Static variable in class nxopen.cae.Result.Quantity

SHEAR_T - Static variable in class nxopen.cae.Result.Component

SHEAR_XZ - Static variable in class nxopen.cae.Result.Component

SHEAR_YZ - Static variable in class nxopen.cae.Result.Component

shearAngle() - Method in interface nxopen.features.shipdesign.EndCutBuilder

Returns the shear angle.

shearCenter() - Method in interface nxopen.features.SectionInertiaAnalysisBuilder

Returns the shear center
License requirements: None.

shearLine() - Method in interface nxopen.features.shipdesign.QualifySketchBuilder

Returns the selected shear line.

shearModulusFromBulkLame(double, double) - Method in interface nxopen.EngineeringFunction

Calculate the shear modulus from bulk modulus and 1st Lame constant.

shearModulusFromBulkPoisson(double, double) - Method in interface nxopen.EngineeringFunction

Calculate the shear modulus from bulk modulus and poisson ratio.

shearModulusFromPoissonLame(double, double) - Method in interface nxopen.EngineeringFunction

Calculate the shear modulus from poisson ratio and 1st Lame constant.

shearModulusFromYoungsBulk(double, double) - Method in interface nxopen.EngineeringFunction

Calculate the shear modulus from youngs modulus and bulk modulus.

shearModulusFromYoungsLame(double, double) - Method in interface nxopen.EngineeringFunction

Calculate the shear modulus from youngs modulus and 1st Lame constant.

shearModulusFromYoungsPoisson(double, double) - Method in interface nxopen.EngineeringFunction

Calculate the shear modulus from youngs modulus and poisson ratio.

shearStrainAngleMaximum(double, double, double) - Method in interface nxopen.EngineeringFunction

Calculate the maximum shear strain angle from the strain components at a space point in the body.

shearStrainMaximum1(double, double, double) - Method in interface nxopen.EngineeringFunction

Calculate the maximum shear strain from the strain components at a space point in the body.

shearStrainMaximum2(double, double) - Method in interface nxopen.EngineeringFunction

Calculate the maximum shear strain from the principal strain at a space point in the body.

shearStressAngleMaximum(double, double, double) - Method in interface nxopen.EngineeringFunction

Calculate the maximum shear stress angle from the stress components at a space point in the body.

shearStressMaximum1(double, double, double) - Method in interface nxopen.EngineeringFunction

Calculate the maximum shear stress from the stress components at a space point in the body.

shearStressMaximum2(double, double) - Method in interface nxopen.EngineeringFunction

Calculate the maximum shear stress from the principal stress at a space point in the body.

SHED_GRID - Static variable in class nxopen.uf.UFDisp.GridContext

shedModeToggle() - Method in interface nxopen.display.TrueShadingBuilder

Returns the True Shading display toggle state
License requirements: None.

shedobjs() - Method in interface nxopen.BasePart

Returns the Display.TrueShadingCollection instance belonging to this part
Created in NX3.0.0

SHEET - Static variable in class nxopen.die.FillAreaBuilder.UpperLimitTypes

Upper limit is defined by a sheet body.

SHEET - Static variable in class nxopen.die.MachineReliefBuilder.TrimSheetTypes

Trimming surface is a sheet body.

sheet - Variable in class nxopen.DisplayManager.J3dData

true if this is a sheet body

SHEET - Static variable in class nxopen.drawings.ConvertDraftingContentsBuilder.SelectConversionEntityType

SHEET - Static variable in class nxopen.drawings.MarkAsTemplateBuilder.TemplateTypeEnum

SHEET - Static variable in class nxopen.drawings.ReferenceShowTypes

sheet() - Method in interface nxopen.drawings.ViewStyleDetailBuilder

Returns the sheet toggle on the DETAIL tab of the View Style Dialog
License requirements: None.

sheet() - Method in interface nxopen.drawings.ViewStyleProjectedBuilder

Returns the projected view style sheet toggle on the PROJECTED tab of the View Style Dialog
License requirements: None.

sheet() - Method in interface nxopen.drawings.ViewStyleSectionConstraintsBuilder

Returns the sheet toggle on the SECTION CONSTRAINTS tab of the View Style Dialog
License requirements: None.

SHEET - Static variable in class nxopen.features.GlobalShapingBuilder.BodyMethod

Output sheet

SHEET - Static variable in class nxopen.features.OvercrownBuilder.OutputType

SHEET - Static variable in class nxopen.features.SectionSurfaceBuilderEx.BodyType

sheet type

SHEET - Static variable in class nxopen.features.SewBuilder.Types

Sheet

SHEET - Static variable in class nxopen.features.ThroughCurveMeshBuilder.BodyPreferenceTypes

Sheet

SHEET - Static variable in class nxopen.features.ThroughCurvesBuilder.BodyPreferenceTypes

Sheet

SHEET - Static variable in class nxopen.FileNewTemplateType

Specifies a file new sheet template

SHEET - Static variable in class nxopen.geometricutilities.FeatureOptions.BodyStyle

Sheet Body

SHEET - Static variable in class nxopen.preferences.SessionModeling.BodyTypeOption

Indicates Body Type is solid

SHEET - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.BlankOption

Select a sheet body as blank.

SHEET - Static variable in class nxopen.uf.UFDieeng.Opts

sheet - Variable in class nxopen.uf.UFDisp.J3dEntity

SHEET_BODIES - Static variable in class nxopen.blockstyler.SelectObject.FilterType

Filter to select all sheet bodies

SHEET_BODIES - Static variable in class nxopen.cam.Preferences.SelectionTypes

sheet bodies

SHEET_BODIES - Static variable in class nxopen.DisplayManager.ShowHideType

Show or hide sheet bodies

SHEET_BODIES - Static variable in class nxopen.features.GlobalShapingBuilder.DeformBodyType

Sheet bodies

SHEET_BODIES - Static variable in class nxopen.features.shipdesign.ShipIntersectionsBuilder.Type

SHEET_BODY - Static variable in class nxopen.die.CompensateRoughDataBuilder.Types

Sheet bodies being compensated.

SHEET_BODY - Static variable in class nxopen.die.FingerClearanceNotchBuilder.Types

Build from either a sheet body or a solid body.

SHEET_BODY - Static variable in class nxopen.facet.FacetedBody.FacetedbodyType

SHEET_BODY - Static variable in class nxopen.features.shipdesign.DeckBuilder.Types

Mold face is being defined by a selected sheet body.

SHEET_BODY - Static variable in class nxopen.features.shipdesign.GenericPlateSystemBuilder.Types

Mold face is being defined by a selected sheet body.

SHEET_BODY - Static variable in class nxopen.features.shipdesign.HullBuilder.Types

Mold face is being defined by a selected sheet body.

SHEET_BODY - Static variable in class nxopen.features.shipdesign.LongitudinalBulkheadBuilder.Types

Mold face is being defined by a selected sheet body.

SHEET_BODY - Static variable in class nxopen.features.shipdesign.PlateBuilder.BodyTypes

Outputs a plate as a sheet body.

SHEET_BODY - Static variable in class nxopen.features.shipdesign.TransverseBulkheadBuilder.Types

Mold face is being defined by a selected sheet body.

SHEET_BODY - Static variable in class nxopen.tooling.EjectorPostProcessingBuilder.TrimSufaceName

Select sheet body

SHEET_BODY - Static variable in class nxopen.tooling.TrimSolidBuilder.Types

Region with sheet bodies.

SHEET_FRAGMENTED - Static variable in class nxopen.uf.UFConstants

SHEET_METAL_NORMAL - Static variable in class nxopen.die.DrawBeadBuilder.OrientSectionToDrawTypes

Orient height parameter to the sheet metal normal at the section location.

SHEET_MIDPOINT - Static variable in class nxopen.features.shipdesign.RollingLineBuilder.StartEvaluationTypes

Use the midpoint of the sheet as the seed point for evaluation.

SHEET_POLYGON_BODIES - Static variable in class nxopen.DisplayManager.ShowHideType

Show or hide sheet polygon bodies

SHEET_TEMPLATE - Static variable in class nxopen.FileNewApplication

Deprecated.

Specifies a drawing sheet template for Insert Sheet dialog

SHEET_TOPO - Static variable in class nxopen.uf.UFBrep.TopoType

SHEET_TRIM - Static variable in class nxopen.tooling.EjectorPostProcessingBuilder.TrimMethod

Sheet Trim

SHEET_ZONE - Static variable in class nxopen.drawings.GeneralWorkFlowBuilder.GridSettingsType

SHEETAND_ZONE - Static variable in class nxopen.drawings.ReferenceShowTypes

sheetBodies() - Method in interface nxopen.die.CompensateRoughDataBuilder

Returns the sheet bodies that will be approximated.

sheetBodies() - Method in interface nxopen.drawings.ViewStyleSectionBuilder

Returns the sheet bodies toggle on the SECTION tab of the View Style Dialog
License requirements: None.

sheetBodies() - Method in interface nxopen.features.MakeSolidBuilder

Returns the sheet bodies that are closed topologically
License requirements: None.

sheetBodiesA - Variable in class nxopen.uf.UFSf.MidsrfUserParms

sheetBody() - Method in interface nxopen.features.MidSurfaceFacePair

Returns the face pair data
License requirements: solid_modeling ("SOLIDS MODELING")
.

SHEETBODY - Static variable in class nxopen.preferences.PartObject.ObjectType

Sheet Body

sheetBody() - Method in interface nxopen.tooling.DieDesDrawDieBuilder

Returns the sheet body, which is used to trim the die top face.

sheetBody() - Method in interface nxopen.tooling.DieDesDrawPunchBuilder

Returns the sheet body, which is used to trim the punch top face.

sheetBody() - Method in interface nxopen.tooling.DieDesignLowerBinderBuilder

Returns the sheet body used as sheet metal product
License requirements: ug_die_design ("Die Design")
.

sheetBody() - Method in interface nxopen.tooling.TrimSolidBuilder

Returns the sheet body to create trim solid.

sheetBodyDeck() - Method in interface nxopen.tooling.DieDesDrawPunchBuilder

Returns the inner deck sheet body, which is used for draw punch inner deck face.

sheetBodyLayer() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

Returns the layer of the tire envelope sheet body.

sheetBodySelection() - Method in interface nxopen.features.MidSurfaceUserDefinedBuilder

Returns the sheet bodies to be treated as user defined neutral sheets
License requirements: None.

SheetBorderSettingsBuilder - Interface in nxopen.drawings

Represents a SheetBorderSettingsBuilder .

sheetBorderSettingsStyle() - Method in interface nxopen.drawings.BorderAndZoneStyleBuilder

Returns the drawing sheet border settings builder
License requirements: drafting ("DRAFTING")
.

sheetCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use TrackDrawingChangesReportFilterBuilder.getReportFilterStatus(nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter) instead.

SheetDraftingViewCollection - Interface in nxopen.drawings

Represents a collection of DraftingView s.

sheetDraftingViews() - Method in interface nxopen.drawings.DrawingSheet

Returns the SheetDraftingViewCollection instance belonging to this drawing sheet .

sheetEdges() - Method in interface nxopen.features.GuidedExtensionBuilderEx

Returns the sheet edges of a sheet body
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

sheetEdges() - Method in interface nxopen.tooling.GuidedExtensionBuilder

Returns the sheet edges of a sheet body
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING")
.

sheetGeometryToSketch() - Method in interface nxopen.ASCImporter

Returns the toggle of creating sketch in sheet
License requirements: nx_layout ("NX Layout")
.

sheetId - Variable in class nxopen.uf.UFModlFeatures.IsodivideFaceData

SheetMarginSettingsBuilder - Interface in nxopen.drawings

Represents the Drawing Sheet Margins Style Builder.

sheetMarginSettingsStyle() - Method in interface nxopen.drawings.BorderAndZoneStyleBuilder

Returns the drawing sheet margin settings builder
License requirements: drafting ("DRAFTING")
.

sheetMetal() - Method in interface nxopen.die.CastReliefBuilder

Returns the sheet that specifies the sheet metal surface
License requirements: None.

sheetMetal() - Method in interface nxopen.die.DrawDiePunchBuilder

Returns the sheet metal of the draw die punch casting.

sheetMetal() - Method in interface nxopen.die.KeywayBuilder

Returns the sheet metal being formed by the casting.

sheetMetal() - Method in interface nxopen.die.RotorBuilder

Returns the sheet metal of the rotor casting.

sheetMetal() - Method in interface nxopen.die.SteelInsertBuilder

Returns the sheet metal of the die steelinsert
License requirements: ug_die_design ("Die Design")
.

sheetMetal() - Method in interface nxopen.die.TrimFlangeDieAssistantBuilder

Returns the sheet metal
License requirements: None.

SheetmetalBaseBuilder - Interface in nxopen.features.sheetmetal

Represents a Sheet Metal Feature Builder to be used in the creation and modification of features.

SheetmetalBendParameters - Class in nxopen.features.sheetmetal

This structure contains the bend parameters for a Sheet Metal bend area.

SheetmetalBendParameters() - Constructor for class nxopen.features.sheetmetal.SheetmetalBendParameters

SheetmetalBendParameters(double, double, double, SheetmetalBendState) - Constructor for class nxopen.features.sheetmetal.SheetmetalBendParameters

Constructor for the SheetmetalBendParameters object.

SheetmetalBendState - Class in nxopen.features.sheetmetal

Bend State

sheetMetalDistance() - Method in interface nxopen.die.FlangeSteelRibChildBuilder

Returns the sheet metal distance of the Flange Steel Rib
License requirements: ug_die_design ("Die Design")
.

sheetMetalDistance() - Method in interface nxopen.die.FlangeSteelRibParentBuilder

Returns the sheet metal distance of the Flange Steel Ribs
License requirements: ug_die_design ("Die Design")
.

sheetMetalFaceAttribute() - Method in interface nxopen.die.DrawBeadBuilder

Returns the attribute definition to be applied to the faces of the sheet metal sheet body.

SheetmetalFaceLayer - Class in nxopen.features.sheetmetal

Face Layer

SheetmetalFaceType - Class in nxopen.features.sheetmetal

Face Type

SheetMetalFromSolid - Interface in nxopen.features

Represents a Sheet Metal from Solid feature
To create or edit an instance of this class, use SheetMetalFromSolidBuilder

Created in NX6.0.0

SheetMetalFromSolidBuilder - Interface in nxopen.features.sheetmetal

Represents a SheetMetalFromSolid builder (Sheet Metal from Solid).

sheetmetalManager() - Method in interface nxopen.features.FeatureCollection

Returns the Straight Brake Sheetmetal Manager for this part .

SheetmetalManager - Interface in nxopen.features.sheetmetal

Represents an object that manages sheetmetal features
To obtain an instance of this class, refer to FeatureCollection

Created in NX4.0.0

SheetmetalManager.InnerBendFacesData - Class in nxopen.features.sheetmetal

This class holds the data returned from SheetmetalManager.getInnerBendFaces(nxopen.Body)

SheetmetalManagerFlangeWidthOption - Class in nxopen.features.sheetmetal

Flange width option

SheetmetalManagerTabSweepDir - Class in nxopen.features.sheetmetal

This enum is for Tab sweep direction flag.

SheetmetalManagerTabType - Class in nxopen.features.sheetmetal

This is the enum for Tab type i.e. base tab and secondary tab.

sheetMetalPartName() - Method in interface nxopen.tooling.BlankGeneratorBuilder

Returns the sheet metal part name.

sheetMetalSheetAttribute() - Method in interface nxopen.die.DrawBeadBuilder

Returns the attribute definition to be applied to the sheet metal sheet body.

sheetName() - Method in interface nxopen.tooling.EWDraftingBuilder

Returns the sheet name option used to edit drafting.

sheetNumber() - Method in interface nxopen.cam.WorkInstructionBuilder

Returns the work instruction sheet number
License requirements: None.

SheetRevision - Interface in nxopen.pdm

Represents a base class that provides common methods for various model elements in a CollaborativeDesign .

SHEETS - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter

Sheet Report Filter

sheetScale() - Method in interface nxopen.features.shipdesign.SectionViewBuilder

Returns the scale of the sheet.

SheetSectionLineCollection - Interface in nxopen.drawings

Represents a collection of SectionLine s.

sheetSectionLines() - Method in interface nxopen.drawings.DrawingSheet

Returns the SheetSectionLineCollection instance belonging to this drawing sheet .

sheetSelection() - Method in interface nxopen.features.MidSurfaceByFacePairsBuilder

Returns the user defined sheet selection
License requirements: None.

sheetsSelection() - Method in interface nxopen.tooling.MWCopySheetsBuilder

Returns the sheets selection for selecting the parting and/or patched sheets to be copied
License requirements: None.

sheetTag - Variable in class nxopen.uf.UFModl.AskThickenSheetParmsData

SheetTemplateManager - Interface in nxopen.drawings

Represents a manager of DraftingView s.

sheetTemplates() - Method in interface nxopen.drawings.DrawingSheetCollection

Returns the Sheet Template Manager for part .

sheetThickness() - Method in interface nxopen.die.TrimLineDevelopmentBuilder

Returns the thickness of sheet metal model.

sheetTitle() - Method in interface nxopen.cam.WorkInstructionBuilder

Returns the user defined Sheet Title
License requirements: None.

sheetToDeform() - Method in interface nxopen.features.GlobalShapingBuilder

Returns the sheet to deform
License requirements: None.

SHEETZONE - Static variable in class nxopen.preferences.SessionDrafting.GridObjectType

Sheet Zone Grid

SheetZoneReferenceBuilder - Interface in nxopen.drawings

builder for creating sheet zone refernce control strings based on the selected attribute and view
To create a new instance of this class, use DraftingManager.createSheetZoneReferenceBuilder()

Created in NX8.0.0

SheetZoneSettingsBuilder - Interface in nxopen.drawings

Represents the Drawing Sheet Zone Setting Style Builder.

sheetZoneSettingsStyle() - Method in interface nxopen.drawings.BorderAndZoneStyleBuilder

Returns the drawing sheet zone settings builder
License requirements: drafting ("DRAFTING")
.

Shelf - Interface in nxopen.features

Represents a shelf feature
To create or edit an instance of this class, use ShelfBuilder

Created in NX10.0.0

SHELF_FROM_END - Static variable in class nxopen.features.ShelfBuilder.LengthMethods

ShelfBuilder - Interface in nxopen.features

Represents a Shelf builder
To create a new instance of this class, use AeroCollection.createShelfBuilder(nxopen.features.Shelf)
Default values.

ShelfBuilder.DepthMethods - Class in nxopen.features

Depth Method for Depth Face

ShelfBuilder.LengthMethods - Class in nxopen.features

Depth Method for Length

ShelfBuilder.ReferenceType - Class in nxopen.features

Type of Reference Object

ShelfBuilder.StepMethod - Class in nxopen.features

Step Method for Side Face

ShelfBuilder.Types - Class in nxopen.features

Type of shelf.

shelfEdge() - Method in interface nxopen.features.ShelfBuilder

Returns the shelf edge
License requirements: None.

shelfEnd() - Method in interface nxopen.features.ShelfBuilder

Returns the shelf end
License requirements: None.

shelfLength() - Method in interface nxopen.features.PatchOpeningsBuilder

Returns the shelf length, used only when type is Features.PatchOpeningsBuilder.Types#JOGGLE
License requirements: None.

shelfPoint1() - Method in interface nxopen.features.PatchOpeningsBuilder

Returns the first shelf point, used only when type is Features.PatchOpeningsBuilder.Types#JOGGLE
License requirements: None.

shelfPoint2() - Method in interface nxopen.features.PatchOpeningsBuilder

Returns the second shelf point, used only when type is Features.PatchOpeningsBuilder.Types#JOGGLE
License requirements: None.

shelfRadius() - Method in interface nxopen.features.PatchOpeningsBuilder

Returns the shelf radius, used only when type is Features.PatchOpeningsBuilder.Types#JOGGLE
License requirements: None.

shelfType() - Method in interface nxopen.features.ShelfBuilder

Returns the type
License requirements: None.

SHELL - Static variable in class nxopen.cae.ElementCreateBuilder.ElemDimType

shell

SHELL - Static variable in class nxopen.cae.ElementExtrudeBuilder.ElemDimType

shell

SHELL - Static variable in class nxopen.cae.ElementProjectBuilder.ElementDimensionType

shell element

SHELL - Static variable in class nxopen.cae.ElementReflectBuilder.ElemDimType

only shell

SHELL - Static variable in class nxopen.cae.ElementRevolveBuilder.ElemDimType

shell

SHELL - Static variable in class nxopen.cae.ElementTranslateBuilder.ElemDimensionType

only shell elements can be selected

SHELL - Static variable in class nxopen.cae.ElementTypeBuilder.ElementType

shell

SHELL - Static variable in class nxopen.cae.MeshCollectorBuilder.ElementDimensionOption

2-d

SHELL - Static variable in class nxopen.cae.modelcheck.ElementMaterialOrientationCheckBuilder.MaterialOrientationType

the material orientation of shell element

SHELL - Static variable in class nxopen.cae.ReassignElementsBuilder.ElementDimensionOption

2-d

Shell - Interface in nxopen.features

Represents a Shell feature.

SHELL - Static variable in class nxopen.preferences.PartVisualizationEmphasis.SeeThruStyleType

Displays de-emphasized shaded geometry as a translucent shell with a single color.

SHELL - Static variable in class nxopen.preferences.SessionVisualizationShade.SeeThruStyleType

Deprecated.

Displays less important shaded geometry as a translucent shell with a specified color.

Shell2SolidBuilder - Interface in nxopen.cae

Represents 3D Tet Mesh Used to create a CAE.Mesh3d
To create a new instance of this class, use MeshManager.createShell2solidBuilder(nxopen.cae.Mesh3d)

Created in NX6.0.0

SHELL_ELEMENT - Static variable in class nxopen.cae.CaeSetGroupFilterType

filter type is 2D element

SHELL_PLATING - Static variable in class nxopen.cae.responsesimulation.DDAMExcitation.MountingType

SHELL_PROPERTY - Static variable in class nxopen.cae.optimization.DAODesignVariableBuilder.Variable

Shell property variables

SHELL_RESULTANT - Static variable in class nxopen.cae.responsesimulation.EvaluationResultType

SHELL_RESULTANTS - Static variable in class nxopen.cae.Result.Quantity

SHELL_RESULTANTS_LEVEL_CROSSING_RATE - Static variable in class nxopen.cae.Result.Quantity

SHELL_STRAIN_RESULTANTS - Static variable in class nxopen.cae.Result.Quantity

SHELL_STRAIN_RESULTANTS_LEVEL_CROSSING_RATE - Static variable in class nxopen.cae.Result.Quantity

SHELL_STRESS - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.SolverInputType

Use the solver shell stress resultants

SHELL_STRESS_RESULTANT - Static variable in class nxopen.cae.responsesimulation.EvaluationResultType

SHELL_TOPO - Static variable in class nxopen.uf.UFBrep.TopoType

ShellBuilder - Interface in nxopen.features

Represents the Shell feature builder.

shellDataLocation() - Method in interface nxopen.cae.responsesimulation.NodalFunctionEvaluationSettingBuilder

Returns the evaluation location of shell element, which is available when EvaluationResultType is nxopen.cae.ResponseSimulation.EvaluationResultType#STRESS , or nxopen.cae.ResponseSimulation.EvaluationResultType#STRAIN
License requirements: nx_response_anlys ("NX Response Analysis")

Created in NX9.0.0

ShellEADBuilder - Interface in nxopen.cae

This class provides Shell Associated Data Support
To create a new instance of this class, use NodeElementManager.createShellEadBuilder()
Default values.

ShellEADBuilder.MaterialOrientationMethod - Class in nxopen.cae

indicates which material orientation method to use

ShellEADBuilder.State - Class in nxopen.cae

indicates to ignore, apply or clear the state property upon commit

shellEdges - Variable in class nxopen.preferences.SessionVisualizationShade.SeeThruOptions

Deprecated.

Determines whether edges are displayed for less important shaded geometry when See-Thru Style is set to Shell.

shellEdgesRgb - Variable in class nxopen.preferences.SessionVisualizationShade.SeeThruOptions

Deprecated.

Specifies the color of edges displayed for less important shaded geometry when See-Thru Style is set to Shell.

ShellElementEvaluationLocation - Class in nxopen.cae.responsesimulation

Specifies shell element evaluation locations

shellElementFace() - Method in interface nxopen.cae.responsesimulation.StrainGageBuilder

Returns the shell element face location type of strain gage
License requirements: nx_response_anlys ("NX Response Analysis")
.

shellEvaluationLocation() - Method in interface nxopen.cae.responsesimulation.ElementalFunctionEvaluationSettingBuilder

Returns the evaluation location of shell element.

ShellExpansion - Interface in nxopen.features.shipdesign

Represents a shell expansion feature
To create or edit an instance of this class, use ShellExpansionBuilder

Created in NX7.5.0

ShellExpansionBuilder - Interface in nxopen.features.shipdesign

Represents a ShellExpansion builder
To create a new instance of this class, use ShipCollection.createShellExpansionBuilder(nxopen.features.shipdesign.ShellExpansion)
Default values.

ShellFace - Interface in nxopen.features

Represents a shell face feature
To create or edit an instance of this class, use ShellFaceBuilder

Created in NX6.0.0

ShellFaceBuilder - Interface in nxopen.features

Represents a ShellFace builder
To create a new instance of this class, use FeatureCollection.createShellFaceBuilder(nxopen.features.ShellFace)
Default values.

shellLayer() - Method in interface nxopen.cae.optimization.TBSLoadCase

Returns the shell layer
License requirements: None.

shellLocation() - Method in interface nxopen.cae.responsesimulation.DataLocation

Returns the start value of frequency range.

ShellOptions() - Constructor for class nxopen.preferences.PartVisualizationEmphasis.ShellOptions

ShellOptions(NXColor.Rgb, PartVisualizationEmphasis.EdgesType, NXColor.Rgb, int) - Constructor for class nxopen.preferences.PartVisualizationEmphasis.ShellOptions

Constructor for the ShellOptions object.

shellRegion() - Method in interface nxopen.cae.DurabilityStressAxesBuilder

Returns the shell region.

shellResultantFx() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

Returns the shell stress resultant Fx component
License requirements: None.

shellResultantFxy() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

Returns the shell stress resultant Fxy component
License requirements: None.

shellResultantFy() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

Returns the shell stress resultant Fy component
License requirements: None.

shellResultantMx() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

Returns the shell stress resultant Mx component
License requirements: None.

shellResultantMxy() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

Returns the shell stress resultant Mxy component
License requirements: None.

shellResultantMy() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

Returns the shell stress resultant My component
License requirements: None.

shellResultantQx() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

Returns the shell stress resultant Qx component
License requirements: None.

shellResultantQy() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

Returns the shell stress resultant Qy component
License requirements: None.

shellRgb - Variable in class nxopen.preferences.SessionVisualizationShade.SeeThruOptions

Deprecated.

Specifies the color of less important shaded geometry when See-Thru Style is set to Shell.

SHELLS - Static variable in class nxopen.cae.DurabilityStressAxesBuilder.NodeElementOptionEnum

Shells

SHELLS - Static variable in class nxopen.cae.responsesimulation.NodalAveragingOption

shellSect() - Method in interface nxopen.cae.ResultVariable

Returns the shell section
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

shellsection - Variable in class nxopen.cae.Result.ResultSection

shellStress() - Method in interface nxopen.cae.LaminateQuickReportBuilder

Returns the shell stress resultants
License requirements: None.

shellStressRule() - Method in interface nxopen.cae.LaminateQuickReportBuilder

Returns the shell stress resultant envelope rule
License requirements: None.

ShellTemplate - Interface in nxopen.features.shipdesign

Represents a shell template feature.

ShellTemplateBuilder - Interface in nxopen.features.shipdesign

Used to edit or create a ShellTemplate feature.

ShellTemplateBuilder.MarkingTypes - Class in nxopen.features.shipdesign

The option for controlling which marking lines are drawn on the plate

ShellTemplateBuilder.PlaneLocationTypes - Class in nxopen.features.shipdesign

The option for how the plane locations will be specified as input.

ShellTemplateBuilder.Types - Class in nxopen.features.shipdesign

The option for controlling how the coordinate system for template creation is specified.

shellTranslucency - Variable in class nxopen.preferences.SessionVisualizationShade.SeeThruOptions

Deprecated.

Translucency percentage applied to less important shaded geometry when See-Thru Style is set to Shell.

SHIELD - Static variable in class nxopen.formboard.UpdateDiscrepancy.ObjectType

Shield connection.

ShieldDefinition - Interface in nxopen.routing.electrical

Represents Routing Electrical ShieldDefinition object
Creator not available in KF.

ShieldDevice - Interface in nxopen.routing.electrical

The Electrical ShieldDevice corresponds to a shield instance of Routing.Electrical.ElectricalStockDevice .

ShieldStockDefinition - Interface in nxopen.routing.electrical

Represents Routing Electrical ShieldStockDefinition object
Creator not available in KF.

shift() - Method in interface nxopen.cam.Cycle

Returns the shift
License requirements: None.

shift() - Method in interface nxopen.features.vehicledesign.PendulumPlacementBuilder

Returns the expression containing the amount to shift the pendulum from the contact point on the car.

SHIFT_JIS - Static variable in class nxopen.features.TextBuilder.ScriptOptions

Specifies the Japanese character set

shiftDown(HoleCalloutSettingsBuilder.Featuretype, int) - Method in interface nxopen.annotations.HoleCalloutSettingsBuilder

If the position of the nth hole feature parameter of feature type can be shifted down, shifts it down by one.

SHIFTED_BASE_DATA - Static variable in class nxopen.features.vehicledesign.PendulumPlacementBuilder.PositionMethodType

SHIFTED_FROM_ROTATED - Static variable in class nxopen.features.vehicledesign.PendulumPlacementBuilder.PositionMethodType

SHIFTED_VEHICLE - Static variable in class nxopen.features.vehicledesign.PendulumPlacementBuilder.PositionMethodType

shiftStatus() - Method in interface nxopen.cam.Cycle

Returns the shift status
License requirements: None.

shiftUp(HoleCalloutSettingsBuilder.Featuretype, int) - Method in interface nxopen.annotations.HoleCalloutSettingsBuilder

If the position of the nth hole feature parameter of feature type can be shifted up, shifts it up by one.

ShimBuilder - Interface in nxopen.tooling

Shim Builder of PDW and EDW.

ShimBuilder.ParentOption - Class in nxopen.tooling

Specify the parent node.

ShimBuilder.Types - Class in nxopen.tooling

Specify the shim operation type.

shimFace() - Method in interface nxopen.tooling.ShimBuilder

Returns the face for doing shim body
License requirements: None.

ShimInnerProfileSetBuilder - Interface in nxopen.tooling

This is a seed block of set list.

ShimInnerProfileSetBuilderList - Interface in nxopen.tooling

Represents a list of objects.

shininess() - Method in interface nxopen.drawings.ShadingViewStyle

Returns the shininess tolerance.

shininess() - Method in interface nxopen.preferences.ShadingViewPreferences

Returns the shininess tolerance.

shininess - Variable in class nxopen.uf.UFView.Lighting

shininessData() - Method in interface nxopen.preferences.ViewVisualizationVisual

Returns the shininess value.

shininessScale() - Method in interface nxopen.drawings.ViewStyleShadingBuilder

Returns the shininess scale data on the SHADING tab of the View Style Dialog
License requirements: None.

SHINY_METAL_COLORWASH - Static variable in class nxopen.display.TrueStudioBuilder.GlobalMaterial

Uses the object's color with shiny metal material characteristics.

SHIP - Static variable in class nxopen.weld.WeldJointBuilder.CoordinateSystem

Desired points and vectors should be in ship coordinate system.

SHIP_BASIC_DESIGN - Static variable in class nxopen.features.shipdesign.MirrorShipStructureBuilder.AppTypes

The ship basic design.

SHIP_BRACKET - Static variable in class nxopen.weld.CharacteristicsBuilder.Type

SHIP_COLLAR_PLATE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type

SHIP_CONTAINER - Static variable in class nxopen.FileNewApplication

Deprecated.

Specifies an NX Ship Container file new template

SHIP_DECK - Static variable in class nxopen.weld.CharacteristicsBuilder.Type

SHIP_DETAIL - Static variable in class nxopen.FileNewApplication

Deprecated.

Specifies an NX Ship Detail file new template

SHIP_DETAIL_DESIGN - Static variable in class nxopen.features.shipdesign.MirrorShipStructureBuilder.AppTypes

The ship detail design.

SHIP_EDGE_REINFORCEMENT - Static variable in class nxopen.weld.CharacteristicsBuilder.Type

SHIP_GENERIC_PLATE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type

SHIP_GRID_AND_SELECTED - Static variable in class nxopen.display.PlanarShipGridBuilder.IntersectOption

intersect the ship grid and selected objects with the plane

SHIP_HULL - Static variable in class nxopen.weld.CharacteristicsBuilder.Type

SHIP_LONGITUDINAL_BULKHEAD - Static variable in class nxopen.weld.CharacteristicsBuilder.Type

SHIP_ORIENTATION - Static variable in class nxopen.features.shipdesign.FeatureParmsBuilder.OrientationAngleRuleTypes

Angles are measured based on location and orientation in the ship.

SHIP_ORIENTATION - Static variable in class nxopen.features.shipdesign.ShipDesignPreferencesBuilder.AngleRuleTypes

Angle direction and reference position is determined by the location in the ship.

SHIP_PROFILE_CUT_OUT - Static variable in class nxopen.weld.CharacteristicsBuilder.Type

SHIP_REFERENCE - Static variable in class nxopen.FileNewApplication

Deprecated.

Specifies an NX Ship Reference file new template

SHIP_RULE - Static variable in class nxopen.tooling.SpreadsheetDataParameter.Status

This is used for ship design to trigger design.

SHIP_SEAM - Static variable in class nxopen.weld.CharacteristicsBuilder.Type

SHIP_STANDARD_PART - Static variable in class nxopen.weld.CharacteristicsBuilder.Type

SHIP_STIFFENER - Static variable in class nxopen.weld.CharacteristicsBuilder.Type

SHIP_STRUCTURE - Static variable in class nxopen.features.shipdesign.MaterialEstimationBuilder.SelectionMethods

Selection by ship structure.

SHIP_STRUCTURE - Static variable in class nxopen.features.shipdesign.PillarSystemBuilder.Types

SHIP_SYSTEM - Static variable in class nxopen.FileNewApplication

Deprecated.

Specifies an NX Ship System file new template

SHIP_TRANSVERSE_BULKHEAD - Static variable in class nxopen.weld.CharacteristicsBuilder.Type

ShipAttributeHolder - Interface in nxopen.features.shipdesign

Represents a ShipAttributeHolder builder
This is an abstract class.

shipBody() - Method in interface nxopen.features.shipdesign.ConceptFromSpreadsheetBuilder

Returns the ship body.

shipBody() - Method in interface nxopen.features.shipdesign.MainDimensionsBuilder

Returns the ship body.

shipBody() - Method in interface nxopen.features.shipdesign.ShipSectionBuilder

Returns the ship body
License requirements: None.

shipbuildingLines() - Method in interface nxopen.drawings.ViewStyle

Returns object for doing View style settings applicable to Ship Lines.

shipbuildingLines() - Method in interface nxopen.preferences.ViewPreferences

Returns object for doing View Preferences settings applicable to Shipbuilding Lines .

ShipbuildingLinesViewPreferences - Interface in nxopen.preferences

Represents set of Shipbuilding Lines View Preferences applicable to drafting views.

ShipbuildingLinesViewPreferences.Lines - Class in nxopen.preferences

Line type

ShipbuildingLinesViewPreferences.ShipbuildingLines - Class in nxopen.preferences

Geometry type

ShipbuildingLinesViewStyle - Interface in nxopen.drawings

Represents set of Shipbuilding Lines View Style applicable to drafting views.

ShipbuildingLinesViewStyle.Lines - Class in nxopen.drawings

Line type

ShipbuildingLinesViewStyle.ShipbuildingLines - Class in nxopen.drawings

Geometry type

shipCollection() - Method in interface nxopen.features.FeatureCollection

Returns the ShipCollection instance belonging to this part .

ShipCollection - Interface in nxopen.features

This class contains the factory method for creating ship feature builder.

ShipCollection.SteelFeatureApproach - Class in nxopen.features

Represents steel feature different approaches.

shipComponent() - Method in interface nxopen.weld.WeldJointBuilder

Returns the components on which the welding joints will be created.

shipComponents() - Method in interface nxopen.features.shipdesign.ShipPreparationBuilder

Returns the components containing basic design data to prepare for meshing.

ShipContainerBuilder - Interface in nxopen.features.shipdesign

This class is used to specify the "container" part for the Ship Structures application, i.e., that part that should have newly created Ship Stiffeners, Plates, Standard Parts added to it as assembly components.

ShipContainerNode - Interface in nxopen.features.shipdesign

Represents the interface for ship container node classes.

ShipCoordinates - Interface in nxopen.features.shipdesign

Represents a ship coordinates feature
Ship Coordinates is not supported in KF.

ShipCoordinatesBuilder - Interface in nxopen.features.shipdesign

Represents a ShipCoordinates builder
To create a new instance of this class, use ShipCollection.createShipCoordinatesBuilder()
Default values.

ShipCoordinatesBuilder.Selection - Class in nxopen.features.shipdesign

Represents the options to select point or component.

ShipCoordinatesBuilder.XDirectionType - Class in nxopen.features.shipdesign

Represents X-frame direction.

ShipCoordinatesBuilder.YDirectionType - Class in nxopen.features.shipdesign

Represents Y-frame direction.

ShipCoordinatesBuilder.ZDirectionType - Class in nxopen.features.shipdesign

Represents Z-frame direction.

ShipCutout - Interface in nxopen.features.shipdesign

Represents a ship cutout feature
To create or edit an instance of this class, use ShipCutoutBuilder

Created in NX7.5.0

ShipCutoutBuilder - Interface in nxopen.features.shipdesign

Represents a ShipCutout builder
To create a new instance of this class, use ShipCollection.createShipCutoutBuilder(nxopen.features.shipdesign.ShipCutout)
Default values.

ShipCutoutBuilder.CreationMethod - Class in nxopen.features.shipdesign

available methods used to place a cutout object

ShipDesignPreferencesBuilder - Interface in nxopen.features.shipdesign

Represents a ShipDesignPreferencesBuilder which is used to change default object display settings for ship structures.

ShipDesignPreferencesBuilder.AngleRuleTypes - Class in nxopen.features.shipdesign

The methods that can be used to measure angles in ship design.

ShipDesignPreferencesBuilder.ColorType - Class in nxopen.features.shipdesign

the color option type

ShipDesignPreferencesBuilder.Types - Class in nxopen.features.shipdesign

This enum represents the ship structure types.

ShipDesignVersionUpBuilder - Interface in nxopen.features.shipdesign

Represents a ShipDesignVersionUpBuilder builder.

ShipDimensionBuilder - Interface in nxopen.annotations

Represents a Annotations.Dimension builder
To create a new instance of this class, use ShipDimensionCollection.createShipDimensionBuilder(nxopen.annotations.Dimension)

Created in NX9.0.0

ShipDimensionBuilder.GroupType - Class in nxopen.annotations

The enum represents group type from concept model

ShipDimensionCollection - Interface in nxopen.annotations

Represents a collection of Dimension objects
To obtain an instance of this class, refer to Part

Created in NX9.0.0

shipDimensions() - Method in interface nxopen.Part

Returns the ShipDimensionCollection instance belonging to this part .

ShipDraftingFramebarGeneralBuilder - Interface in nxopen.annotations

Represents a ShipDraftingFramebarGeneralBuilder
This is a sub-builder class and cannot be directly instantiated

Created in NX9.0.0

ShipDraftingFramebarGeneralBuilder.TicDirectionTypes - Class in nxopen.annotations

Tic Direction Options

shipDraftingViewLines() - Method in interface nxopen.drawings.ViewStyle

Returns object for doing View style settings applicable to Ship Drafting View Lines.

shipDraftingViewLines() - Method in interface nxopen.preferences.ViewPreferences

Returns object for doing View Preferences settings applicable to Ship Drafting View Lines .

ShipDraftingViewLinesBuilder - Interface in nxopen.drawings

Represents a ship view lines block
To create a new instance of this class, use DraftingViewCollection.createShipDraftingViewLinesBuilder()

Created in NX10.0.0

ShipDraftingViewLinesBuilderList - Interface in nxopen.drawings

Represents a list of objects.

ShipDraftingViewLinesViewPreferences - Interface in nxopen.preferences

Represents set of Ship Drafting View Lines View Preferences applicable to drafting views.

ShipDraftingViewLinesViewPreferences.Lines - Class in nxopen.preferences

Line type

ShipDraftingViewLinesViewStyle - Interface in nxopen.drawings

Represents set of Ship Drafting Lines View Style applicable to drafting views.

ShipDraftingViewLinesViewStyle.Lines - Class in nxopen.drawings

Line type

ShipEndCut - Interface in nxopen.features.shipdesign

Represents a ship end cut feature
To create or edit an instance of this class, use ShipEndCutBuilder

Created in NX7.5.0

ShipEndCutBuilder - Interface in nxopen.features.shipdesign

Represents a ShipEndCut builder
To create a new instance of this class, use ShipCollection.createShipEndCutBuilder(nxopen.features.shipdesign.ShipEndCut)
Default values.

ShipEndCutBuilder.CreationMethod - Class in nxopen.features.shipdesign

available methods used to place a cutout object

ShipFeatureConverter - Interface in nxopen.features.shipdesign

This class is used to convert/upgrade legacy Ship Design features.

ShipFeatureConverter.PartScope - Class in nxopen.features.shipdesign

Settings for the conversion scope

ShipFlatPattern - Interface in nxopen.features.shipdesign

Deprecated.

Deprecated in NX8.0.0. Use PlatePreparationBuilder .CreatePlatePreparationBuilder() instead.

ShipFlatPatternBuilder - Interface in nxopen.features.shipdesign

Deprecated.

Deprecated in NX8.0.0. Use PlatePreparationBuilder instead.

ShipIntersections - Interface in nxopen.features.shipdesign

Represents a ship intersection feature
To create or edit an instance of this class, use ShipIntersectionsBuilder

Created in NX7.5.0

ShipIntersectionsBuilder - Interface in nxopen.features.shipdesign

Represents a ShipIntersections builder
To create a new instance of this class, use ShipCollection.createShipIntersectionsBuilder(nxopen.features.shipdesign.ShipIntersections)
Default values.

ShipIntersectionsBuilder.CreationType - Class in nxopen.features.shipdesign

Define the creation type

ShipIntersectionsBuilder.Type - Class in nxopen.features.shipdesign

Define the output option for each of the frame type

shipLibType() - Method in interface nxopen.features.shipdesign.UpdateShipLibraryBuilder

Returns the ship lib type
License requirements: None.

ShipNameFieldBuilder - Interface in nxopen.features.shipdesign

A field, combined with other fields, to generate a name for a Ship Basic Design Object such as a Deck.

ShipnameFieldBuilderType - Class in nxopen.features.shipdesign

Field Type

shipNames() - Method in interface nxopen.features.shipdesign.BracketBuilder

Returns the ship name.

shipNames() - Method in interface nxopen.features.shipdesign.CollarPlateBuilder

Returns the ship name.

shipNames() - Method in interface nxopen.features.shipdesign.CopyObjectsBuilder

Returns the Ship Names builder, used to assign names to the copied objects created.

shipNames() - Method in interface nxopen.features.shipdesign.CopyPasteNewBuilder

Returns the Ship Names builder, used to assign names to the copied objects created.

shipNames() - Method in interface nxopen.features.shipdesign.EdgeReinforcementBuilder

Returns the Ship Names builder, used to assign names to the Edge Reinforcement Systems created.

shipNames() - Method in interface nxopen.features.shipdesign.PillarBuilder

Returns The ship name builder.

shipNames() - Method in interface nxopen.features.shipdesign.PillarSystemBuilder

Returns the Ship Names builder, used to assign names to the Pillar Systems created.

shipNames() - Method in interface nxopen.features.shipdesign.PlateBuilder

Returns The ship name builder.

shipNames() - Method in interface nxopen.features.shipdesign.PlateSystemBuilder

Returns the Ship Names builder, used to assign names to the Plate Systems created.

shipNames() - Method in interface nxopen.features.shipdesign.SeamBuilder

Returns the Ship Names builder, used to assign names to the Seams created.

shipNames() - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder

Returns the Ship Names builder, used to assign names to the Standard Parts created.

shipNames() - Method in interface nxopen.features.shipdesign.StiffenerBuilder

Returns The ship name builder.

shipNames() - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder

Returns the Ship Names builder, used to assign names to the Stiffener Systems created.

ShipNamesBuilder - Interface in nxopen.features.shipdesign

This class provides the mechanism for defining the names of Basic Design objects such as Decks, Bulkheads, Stiffener Systems, etc.

ShipNamesBuilderList - Interface in nxopen.features.shipdesign

Represents a list of objects.

ShipnamesBuilderType - Class in nxopen.features.shipdesign

The type of Ship Object for which automatically generated names will be created

ShipnamesBuilderVersion - Class in nxopen.features.shipdesign

The version of Ship Object naming rule

shipNamesList() - Method in interface nxopen.features.shipdesign.ShipNamesListBuilder

Returns the list of ShipNamesBuilder objects
License requirements: None.

ShipNamesListBuilder - Interface in nxopen.features.shipdesign

This class provides a list of ShipNamesBuilder objects.

ShipNavigatorNodeBuilder - Interface in nxopen.features.shipdesign

Represents the ship navigator node builder to add or edit ship navigator node.

ShipNavigatorNodeBuilder.NodeTypes - Class in nxopen.features.shipdesign

Settings to indicate the type of ship navigator node.

shipNo() - Method in interface nxopen.features.shipdesign.QualifySketchBuilder

Returns the ship no.

ShipObjectNode - Interface in nxopen.features.shipdesign

Represents the interface for ship object node classes.

shipObjectType() - Method in interface nxopen.features.shipdesign.ShipNamesBuilder

Returns the Ship object type (Hull, Deck, etc.) for which names will be generated.

ShipPartNode - Interface in nxopen.features.shipdesign

Represents the interface for ship part node classes.

SHIPPED - Static variable in class nxopen.options.LevelType

Shipped level

SHIPPED - Static variable in class nxopen.preferences.LoadDraftingStandardBuilder.LoadLevel

the shipped level

ShipPreparationBuilder - Interface in nxopen.features.shipdesign

Creates a builder used to prepare basic design data for meshing.

ShipPreparationBuilder.FindShipComponentsData - Class in nxopen.features.shipdesign

This class holds the data returned from ShipPreparationBuilder.findShipComponents()

ShipPreparationInfo - Interface in nxopen.features.shipdesign

Used to interrogate and change the processing within the ShipPreparationBuilder .

ShipPreparationInfo.Types - Class in nxopen.features.shipdesign

Used to specify the type of object represented in the data.

ShipProfileCutout - Interface in nxopen.features.shipdesign

Represents a profile cutout feature for NX75 using sketch expression modifier block.

ShipProfileCutoutBuilder - Interface in nxopen.features.shipdesign

Represents a ProfileCutout builder for editing legacy(NX75) profile cutout feature.

ShipProxyNode - Interface in nxopen.features.shipdesign

Represents the interface for ship proxy node classes.

ShipSection - Interface in nxopen.features.shipdesign

Represents a ship section feature
To create or edit an instance of this class, use ShipSectionBuilder

Created in NX7.5.0

ShipSectionBuilder - Interface in nxopen.features.shipdesign

Represents a ShipSection builder
To create a new instance of this class, use ShipCollection.createShipSectionBuilder(nxopen.features.shipdesign.ShipSection)
Default values.

ShipSectionBuilder.Type - Class in nxopen.features.shipdesign

Define the creation type

ShipSectionBuilder.XFilter - Class in nxopen.features.shipdesign

Define the output option for each of the frame type

ShipSectionBuilder.ZFilter - Class in nxopen.features.shipdesign

Define the output option for each of the frame type

shipSession() - Method in interface nxopen.Session

Returns the ShipSession belonging to this session.

ShipSession - Interface in nxopen.shipdesign

Represents Ship session
To obtain an instance of this class, refer to Session

Created in NX11.0.0

shipStructure() - Method in interface nxopen.features.shipdesign.AlongGuideCutBuilder

Returns the target plate or stiffener when the AlongGuideCutBuilder.CreationMethod is nxopen.features.ShipDesign.AlongGuideCutBuilder.CreationMethod#WELD_CLEARANCE .

shipStructure() - Method in interface nxopen.features.shipdesign.DisplaySolidBuilder

Returns the ship structure whose solid display is desired.

shipStructure() - Method in interface nxopen.features.shipdesign.EditStockBuilder

Returns the ship structures to change the stock information
License requirements: None.

shipStructure() - Method in interface nxopen.features.shipdesign.SeamBuilder

Returns the ship structure upon which seams will be created.

shipStructure() - Method in interface nxopen.features.shipdesign.SectionEditorBuilder

Returns the ship structures
License requirements: None.

shipStructure() - Method in interface nxopen.features.shipdesign.SectionViewBuilder

Returns the ship structure builder, which represents a ShipStructureBuilder .

shipStructure() - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder

Returns the ship structure upon which to create the stiffener system.

ShipStructureBuilder - Interface in nxopen.features.shipdesign

Represents a ShipStructureBuilder .

shipStructureEdge() - Method in interface nxopen.features.shipdesign.AlongGuideCutBuilder

Returns the target edge when the AlongGuideCutBuilder.CreationMethod is nxopen.features.ShipDesign.AlongGuideCutBuilder.CreationMethod#WATER_STOP .

shipStructures() - Method in interface nxopen.features.shipdesign.MaterialEstimationBuilder

Returns the selected ship structures.

shipStructureType() - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder

Returns the ship structure type.

ShipTrimBody - Interface in nxopen.features.shipdesign

Represents a ship trim body feature
To create or edit an instance of this class, use ShipTrimBodyBuilder

Created in NX9.0.1

ShipTrimBodyBuilder - Interface in nxopen.features.shipdesign

Represents a ShipTrimBodyBuilder .

shipType() - Method in interface nxopen.cae.responsesimulation.RSEventAttributes

Returns the ship type
License requirements: nx_response_anlys ("NX Response Analysis")
.

SHM - Static variable in class nxopen.mechatronics.SignalMappingBuilder.AppOption

SHMConfigurationBuilder - Interface in nxopen.mechatronics

Represents a SHMConfigurationBuilder builder
To create a new instance of this class, use PhysicsManager.createSHMConfigurationBuilder()

Created in NX9.0.0

shmname() - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilder

Returns the SHM name.

shmsignalAccess() - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilder

Returns the SHM access previlege type.

SHMSignalConnection - Interface in nxopen.mechatronics

Represents the SHM Signal connection class.

SHMSignalConnectionBuilder - Interface in nxopen.mechatronics

Represents a SHMSignalConnectionBuilder
To create a new instance of this class, use SHMSignalConnectionCollection.createSHMSignalConnectionBuilder(nxopen.mechatronics.SHMSignalConnection)

Created in NX9.0.0

SHMSignalConnectionBuilder.DataType - Class in nxopen.mechatronics

Represents the data type.

SHMSignalConnectionBuilder.EndianType - Class in nxopen.mechatronics

Represents the endian type.

SHMSignalConnectionBuilder.SHMSignalAccessType - Class in nxopen.mechatronics

Represents the SHM Signal access type.

SHMSignalConnectionBuilder.StreamIOType - Class in nxopen.mechatronics

Represents the mapping data sream direction.

SHMSignalConnectionBuilderList - Interface in nxopen.mechatronics

Represents a list of objects.

SHMSignalConnectionCollection - Interface in nxopen.mechatronics

Represents a collection of SHM Signal Connection.

shmsignalConnectionList() - Method in interface nxopen.mechatronics.SHMConfigurationBuilder

Returns the SHM Signal Connection Builder list
License requirements: None.

shmsignalConnectionList() - Method in interface nxopen.mechatronics.SignalMappingBuilder

Returns the SHM Signal Connection Builder list
License requirements: None.

shmsignalConnections() - Method in interface nxopen.mechatronics.PhysicsManager

Returns the SHMSignalConnectionCollection belonging to this part
Created in NX9.0.0

shmsignalName() - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilder

Returns the SHM signal name.

shmsignalType() - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilder

Returns the SHM signal type.

SHOCK_RESPONSE_SPECTRUM - Static variable in class nxopen.cae.XyFunctionDataType

Function is Shock Response Spectrum

SHOCK_RESPONSE_SPECTRUM - Static variable in class nxopen.cae.XyFunctionGeneralType

Function is Shock Response Spectrum

SHOCK_RESPONSE_SPECTRUM - Static variable in class nxopen.cae.XyFunctionLoadType

Function is Shock Response Spectrum

SHOCK_RESPONSE_SPECTRUM - Static variable in class nxopen.cae.XyFunctionResponseType

Function is Shock Response Spectrum

shockDriverJointSteps() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

Returns the step number of the shock driver joint of the Five Link Solid Axle without steering suspension template.

shopdoc() - Method in interface nxopen.UFSession

SHORT - Static variable in class nxopen.features.FaceBlendBuilder.TrimmingMethod

Trim short

SHORT - Static variable in class nxopen.pdm.PdmSoaqueryNxmgrfielddatatype

Short

SHORT_BIT - Static variable in class nxopen.tooling.LsdynaKfileGeneratorBuilder.MeshDataType

32 bit IEEE format

SHORT_LONG_ARMWITH_STEERING - Static variable in class nxopen.features.vehicledesign.TireEnvelopeBuilder.SuspensionTemplateType

Use the Short-Long Arm with steering suspension template.

SHORT_LONG_ARMWITHOUT_STEERING - Static variable in class nxopen.features.vehicledesign.TireEnvelopeBuilder.SuspensionTemplateType

Use the Short-Long Arm without steering suspension template.

SHORT_NAME - Static variable in class nxopen.Step203Creator.EntityNameOption

Deprecated.

create short names

SHORT_NAME - Static variable in class nxopen.Step214Creator.EntityNameOption

Deprecated.

create short names

SHORT_NAME - Static variable in class nxopen.StepCreator.EntityNameOption

create short names

shortDescription() - Method in interface nxopen.routing.DesignRuleViolation

Returns the short description of the design rule violation is returned
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

SHORTEN_ARC_OR_CHAMFER - Static variable in class nxopen.cam.BoundaryTurnMemberFineFinishCorner.ValueType

SHORTEST - Static variable in class nxopen.cam.InspectionAlignmentBuilder.RotateTableDirections

Rotate table in shortest direction

SHORTEST3D_DISTANCE - Static variable in class nxopen.features.TrimCurveBuilder.InteresectionDirectionOptions

Shortest 3d distance

SHORTEST_DISTANCE_CLEARANCE - Static variable in class nxopen.cam.NcmTransferBuilder.AppDepMethodTypes

shortest distance from/to clearance

SHORTEST_DISTANCE_TO_CLEARANCE - Static variable in class nxopen.cam.NcmPlanarBuilder.FinalTypes

shortest distance to clearance

SHORTEST_DISTANCE_TO_CLEARANCE - Static variable in class nxopen.cam.NcmPlanarBuilder.InitialTypes

shortest distance to clearance

SHORTEST_LENGTH - Static variable in class nxopen.routing.electrical.ElectricalStockDevice.AutoRouteSel

SHORTEST_PATH - Static variable in class nxopen.cam.fbm.FeatureGeometry.SortOrder

Sort order: Shortest Path

SHORTEST_PATH - Static variable in class nxopen.cam.HoleBossGeom.OptimizationTypes

Optimization: Shortest Path

SHORTEST_PATH - Static variable in class nxopen.cam.InspectionLinkPmiBuilder.PathOrderTypes

Path order optimization will use the shortest path method

SHORTEST_PATH - Static variable in class nxopen.cam.InspectionLinkPmiBuilder.PointOrderTypes

Point order optimization will use the shortest path method

SHORTEST_TO_CLEARANCE - Static variable in class nxopen.cam.NcmPlanarBuilder.TransferBetweenRegionsTypes

shortest to clearance

SHORTEST_TO_CLEARANCE - Static variable in class nxopen.cam.NcmPlanarBuilder.TransferWithinLevelsTypes

shortest to clearance

SHORTEST_TO_CLEARANCE - Static variable in class nxopen.cam.NcmTransfer.TransferTypes

shortest to clearance

SHORTEST_TO_CLEARANCE - Static variable in class nxopen.cam.NcmTransferBuilder.TraverseTypes

traverse shortest to clearance

SHOTEST_DISTANCE - Static variable in class nxopen.cae.NodeProjectBuilder.ProjectionMethodType

along shortest distance

shouldCopySketchBase() - Method in interface nxopen.linedesigner.ColumnFeatureBuilder

Returns
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

shouldCopySketchColumn() - Method in interface nxopen.linedesigner.ColumnFeatureBuilder

Returns
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

SHOULDER - Static variable in class nxopen.cam.HoleMakingBuilder.ControlPointTypes

shoulder

shoulder() - Method in interface nxopen.features.SectionSurfaceBuilder

Deprecated.

Deprecated in NX9.0.0. Use SectionSurfaceBuilderEx instead.

SHOULDER - Static variable in class nxopen.features.SectionSurfaceBuilderEx.ConicType

Shoulder mode

SHOULDER - Static variable in class nxopen.HumanData.InverseKinematicsInitJoint

Indicate starting at the shoulder for simple arm motions without changing the upper body position.

SHOULDER - Static variable in class nxopen.tooling.EjectorTableBuilder.EjectorType

shoulder ejectors

SHOULDER_DEPTH - Static variable in class nxopen.cam.CenterlineDrillTurningBuilder.DepthTypes

obsolete Shoulder Depth

SHOULDER_ELBOW_LENGTH - Static variable in class nxopen.HumanData.AdvancedScalingType

Indicate scaling of shoulder_elbow_length

SHOULDER_ONLY - Static variable in class nxopen.HumanReachZone.MethodType

shoulderCurve() - Method in interface nxopen.features.SectionSurfaceBuilderEx

Returns the shoulder curve.

shoulderToHipLength() - Method in interface nxopen.features.vehicledesign.ManikinBuilder

Returns the shoulder to hip length.

show(View) - Method in interface nxopen.assemblies.Explosion

Changes the view so that it shows the explosion.

show() - Method in interface nxopen.blockstyler.BlockDialog

Shows the dialog in BlockStyler.BlockDialog.DialogMode#CREATE mode.

show(BlockDialog.DialogMode) - Method in interface nxopen.blockstyler.BlockDialog

Shows the dialog based upon the mode specified in BlockStyler.BlockDialog.DialogMode .

show() - Method in interface nxopen.blockstyler.UIBlock

Returns the Visibility of block.

SHOW - Static variable in class nxopen.cae.Post.GroupVisibility

show - Variable in class nxopen.cae.Post.Headerlines

show(boolean) - Method in interface nxopen.cae.PostAnnotation

Show/Hide annotation object on graphics screen.

SHOW - Static variable in class nxopen.cae.ProjectNodesToCadGeometryBuilder.Operation

Display information on nodes that are off the CAD geometry by more than the input tolerance

show() - Method in interface nxopen.display.GridBuilder

Returns the show
License requirements: None.

show() - Method in interface nxopen.display.SectionCurveSettingsBuilder

Returns the curve on off flag.

SHOW - Static variable in class nxopen.features.shipdesign.FeaturesBatchOperationBuilder.Types

SHOW - Static variable in class nxopen.fields.DisplayPropertiesBuilder.TblPointTypeEnum

show(String, NXMessageBox.DialogType, String) - Method in interface nxopen.NXMessageBox

Show message box.

show(String, NXMessageBox.DialogType, String[]) - Method in interface nxopen.NXMessageBox

Show message box.

show() - Method in interface nxopen.uistyler.Dialog

Displays an NX (UIStyler generated) "bottom" dialog.

show2dWorkpiece(CAMObject[]) - Method in interface nxopen.cam.CAMSetup

Show 2D workpiece
License requirements: cam_base ("CAM BASE")
.

show2dWorkpieceIn(CAMObject[]) - Method in interface nxopen.cam.CAMSetup

Show ingoing 2D workpiece
License requirements: cam_base ("CAM BASE")
.

show2dWorkpieceOut(CAMObject[]) - Method in interface nxopen.cam.CAMSetup

Show outgoing 2D workpiece
License requirements: cam_base ("CAM BASE")
.

show3dWorkpiece(CAMObject[]) - Method in interface nxopen.cam.CAMSetup

Show 3D workpiece
License requirements: cam_base ("CAM BASE")
.

SHOW_ALL - Static variable in class nxopen.display.PlanarShipGridBuilder.LabelDisplayOption

Display label for every grid line

SHOW_ALL - Static variable in class nxopen.drawings.CustomViewSettingsBuilder.Features

SHOW_ALL - Static variable in class nxopen.preferences.HiddenLineSmallFeatureOption

Show All

SHOW_ALL_COMPONENTS - Static variable in class nxopen.tooling.ObjectAttributeManagementBuilder.ShowComponentsType

SHOW_ATTRIBUTE_OF_SELECTED_OBJECT - Static variable in class nxopen.tooling.ObjectAttributeManagementBuilder.ShowType

SHOW_DIMENSION - Static variable in class nxopen.MeasureBuilder.AnnotationType

SHOW_EVERY_FOURTH - Static variable in class nxopen.display.PlanarShipGridBuilder.LabelDisplayOption

Display label for every fourth grid line

SHOW_EVERY_OTHER - Static variable in class nxopen.display.PlanarShipGridBuilder.LabelDisplayOption

Display label for every other grid line

SHOW_EVERY_THIRD - Static variable in class nxopen.display.PlanarShipGridBuilder.LabelDisplayOption

Display label for every third grid line

SHOW_FLAG - Static variable in class nxopen.uf.UFConstants

SHOW_INTERSECTION_CURVE - Static variable in class nxopen.motion.PackagingInterferenceBuilder.Action

Show intersection curve of interference volumes

SHOW_OBJECT_ACCORDING_TO_ATTRIBUTE - Static variable in class nxopen.tooling.ObjectAttributeManagementBuilder.ShowType

SHOW_ONLY - Static variable in class nxopen.cae.Post.GroupVisibility

SHOW_ONLY - Static variable in class nxopen.View.ShowOrHideType

SHOW_PARENT_SELECT_OPTION - Static variable in class nxopen.features.CopyPasteBuilder.BuilderVersion

Value of version which introduces parent select option; It should be added since NX8.5.1.

SHOW_PART_AND_TIP_JUNCTIONS - Static variable in class nxopen.sim.SimDebugBuilder.UiType

Show Part And Tip Junction

showAddButton() - Method in interface nxopen.blockstyler.ListBox

Returns the ShowAddButton.

showAddNewSet() - Method in interface nxopen.blockstyler.SetList

Returns the ShowAddNewSet.

showAdjacent(DisplayableObject[]) - Method in interface nxopen.DisplayManager

Display objects adjacent to a set of displayable objects(CAEFace , CAEEdge ).

showAdjacentBlends() - Method in interface nxopen.drawings.CustomViewSettingsBuilder

Returns the show adjacent blends
License requirements: None.

ShowAdjacentBuilder - Interface in nxopen.cae

Represents a ShowAdjacentBuilder
To create a new instance of this class, use ShowHideManager.createShowAdjacentBuilder()

Created in NX5.0.0

ShowAdjacentGroupMethod - Interface in nxopen.cae

Represents the output from the Show Hide Group smart selector method
To obtain an instance of this class use CAE::SmartSelectionManager
.

showAllDatumAxes() - Method in interface nxopen.SketchAlongPathBuilder

Returns the flag to create all datum axes for path having shared edge.

showAnalysis - Variable in class nxopen.uf.UFSf.MeshVisuals

showAngleLeadingZeros() - Method in interface nxopen.drawings.GeneralViewStyle

Returns the status of leading zeros display in view angle.

showAngleLeadingZeros() - Method in interface nxopen.preferences.GeneralViewPreferences

Returns the status of leading zeros display in view angle.

showAngleTrailingZeros() - Method in interface nxopen.drawings.GeneralViewStyle

Returns the status of trailing zeros display in view angle.

showAngleTrailingZeros() - Method in interface nxopen.preferences.GeneralViewPreferences

Returns the status of trailing zeros display in view angle.

showAnnotations() - Method in interface nxopen.layout2d.ComponentSettingsBuilder

Returns the flag to show annotations or not
License requirements: None.

showArrowMagnitude - Variable in class nxopen.cae.Post.Mark

showArrowXComponent - Variable in class nxopen.cae.Post.Mark

showArrowYComponent - Variable in class nxopen.cae.Post.Mark

showArrowZComponent - Variable in class nxopen.cae.Post.Mark

showAxis() - Method in interface nxopen.fields.DisplayPropertiesBuilder

Returns the show axis
License requirements: None.

showAxisSubBlock() - Method in interface nxopen.blockstyler.OrientXpress

Returns the ShowAxisSubBlock
License requirements: None.

showBackground() - Method in interface nxopen.cae.xyplot.BaseGridLayoutStyleSetting

Returns a value indicating whether to display the background
License requirements: None.

showBanner - Variable in class nxopen.uf.UFPlot.BannerOptions

showBlindVolume() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder

Returns the indication if blind volume will be displayed.

showBody(boolean) - Method in interface nxopen.features.Feature

Show the body created by the feature
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

showBorder - Variable in class nxopen.cae.Post.AnnotationBox

showBoundbox() - Method in interface nxopen.tooling.WorkpieceBuilder

Returns the setting to show the bounding box of the product or not
License requirements: None.

showBreakLines() - Method in interface nxopen.drawings.ViewBreakBuilder

Returns the show break lines
License requirements: None.

showByType(DisplayManager.ShowHideType, DisplayManager.ShowHideScope) - Method in interface nxopen.DisplayManager

Deprecated.

Deprecated in NX9.0.0. Use DisplayManager.showByType(nxopen.DisplayManager.ShowHideType, nxopen.DisplayManager.ShowHideScope) that takes a string type instead.

showByType(String, DisplayManager.ShowHideScope) - Method in interface nxopen.DisplayManager

Shows a set of objects by type.

showCap() - Method in interface nxopen.display.DynamicSectionBuilder

Returns the cap on off flag
License requirements: None.

showCenterLines() - Method in interface nxopen.drawings.CustomViewSettingsBuilder

Returns the show center lines
License requirements: None.

showCenterPoint() - Method in interface nxopen.annotations.CenterMarkSettingsBuilder

Returns the show center point option for Center Marks
License requirements: None.

showChanges() - Method in interface nxopen.sim.postconfigurator.PostConfiguratorBuilder

Shows the post configurator data changes in the listing window.

showCheckBoundaryStatus() - Method in interface nxopen.drawings.CustomViewSettingsBuilder

Returns the show check boundary status
License requirements: None.

showClearance() - Method in interface nxopen.features.vehicledesign.DynamicCurbBuilder

Returns the indication if the distance measurement will be shown.

showClip() - Method in interface nxopen.display.DynamicSectionBuilder

Returns the clip on off flag
License requirements: None.

showClippedGhost - Variable in class nxopen.cae.Post.Clipping

showCollaborativeDesignPreview() - Method in interface nxopen.assemblies.Subset

Displays the preview for the Collaborative Design in the graphics window.

showColumnHeadings() - Method in interface nxopen.blockstyler.SetList

Returns the ShowColumnHeadings
License requirements: None.

showColumns() - Method in interface nxopen.annotations.HoleTableSettingsFormatBuilder

Returns the show columns
License requirements: None.

showComb() - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord

Deprecated.

Deprecated in NX8.5.0. Use CurveAnalysisDisplay .

showCombs() - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder

Returns the show combs
License requirements: None.

showComponent(Tag, Tag) - Method in interface nxopen.uf.UFAssem

Refer to UF_ASSEM_show_component for documentation.

ShowComponentBuilder - Interface in nxopen.assemblies

Represents a ShowComponentBuilder
To create a new instance of this class, use AssemblyManager.createShowComponentBuilder()

Created in NX6.0.0

showComponents(NXObject[]) - Method in interface nxopen.drawings.DraftingView

Sets the view origin at the provided location.

showComponents(int, Component[]) - Method in interface nxopen.tooling.BomListBuilder

Shows the corresponding components of given row in the BOM List so that the components can be exported to spreadsheet.

showControlPolygon - Variable in class nxopen.uf.UFCurve.AnalysisDisplay

showCracks() - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder

Returns the option to indicate whether to show crack region or not
License requirements: None.

showCrosshairsToggle() - Method in interface nxopen.display.SelPref

Returns the show crosshairs toggle
License requirements: None.

showCurvatureComb - Variable in class nxopen.uf.UFCurve.AnalysisDisplay

showCurvePreview(boolean) - Method in interface nxopen.display.DynamicSectionBuilder

Show/hide curve preview.

showCurves() - Method in interface nxopen.display.DynamicSectionBuilder

Deprecated.

Deprecated in NX6.0.0. Use ModelingView.isDynamicSectionVisible(nxopen.display.DynamicSection) instead.

showCutting() - Method in interface nxopen.cam.PathDisplay

Returns the indicator to display only cutting moves in a tool path.

showDefaultAsOriginal() - Method in interface nxopen.blockstyler.LineWidth

Returns the ShowDefaultAsOriginal.

showDeformed - Variable in class nxopen.uf.UFSf.MeshVisuals

showDeleteButton() - Method in interface nxopen.blockstyler.ListBox

Returns the ShowDeleteButton.

showDemoCylinder() - Method in interface nxopen.features.vehicledesign.CloseRangeDemoCylinderListItemBuilder

Returns the indication if demo cylinder will be shown.

showDemoCylinderRay() - Method in interface nxopen.features.vehicledesign.CloseRangeDemoCylinderListItemBuilder

Returns the indication if demo cylinder ray will be shown.

showDimension() - Method in interface nxopen.features.ToolingBoxBuilder

Returns the value indicate whether to show bounded box dimension or not during preview.

showDimensions() - Method in interface nxopen.features.Feature

Show all feature dimensions of a feature.

showDimensions() - Method in interface nxopen.layout2d.ComponentSettingsBuilder

Returns the flag to show dimensions or not
License requirements: None.

showDimensions(DisplayableObject[]) - Method in interface nxopen.Sketch

Unblanks dimensions in the active sketch associated with the input sketch geometry
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.

showDimensions() - Method in interface nxopen.Sketch

Unblanks all the dimensions of input sketch
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.

showDimensions(Sketch.ConstraintGeometry[]) - Method in interface nxopen.Sketch

Unblanks dimensions in the active sketch associated with the input sketch geometry.

showDistanceMeasurement() - Method in interface nxopen.features.vehicledesign.GroundClearanceBuilder

Returns the value indicating if the distance measurement should be displayed.

showDistanceMeasurement() - Method in interface nxopen.features.vehicledesign.InnerAngleBuilder

Returns the value to show distance measurement.

showDistanceMeasurement() - Method in interface nxopen.features.vehicledesign.OilPanBuilder

Returns the indication if the distance measurement will be shown.

showDistanceMeasurement() - Method in interface nxopen.features.vehicledesign.SlopeBuilder

Returns the value to show distance measurement.

showDistanceMeasurement() - Method in interface nxopen.features.vehicledesign.StaticCurbBuilder

Returns the value to show distance measurement.

showDuplicateElements - Variable in class nxopen.cae.modelcheck.DuplicateElementsCheckBuilder.DisplaySettings

Whether to show duplicate elements

showDuplicateNodes - Variable in class nxopen.cae.modelcheck.DuplicateNodesCheckBuilder.DisplaySettings

Whether to show duplicate nodes

showEdgesHiddenByEdges() - Method in interface nxopen.drawings.CustomViewSettingsBuilder

Returns the show edges hidden by edges
License requirements: None.

showEditedStatus - Variable in class nxopen.uf.UFCam.Preferences

showElementLabels - Variable in class nxopen.cae.modelcheck.DuplicateElementsCheckBuilder.DisplaySettings

Whether to show labels of duplicate elements

showEndpoints() - Method in interface nxopen.cam.PathDisplay

Returns the indicator to display symbol at the end of each motion.

showExcludes() - Method in interface nxopen.cae.BCSelectionDisplayBuilder

Returns a value indicating how the BCs excluded Model objects will be displayed with the color set by BCSelectionDisplayBuilder.setExcludesColor(nxopen.NXColor) , if True they be displayed using the Excludes Color , if false they be displayed with default color
License requirements: None.

showExpandCollapseMarker() - Method in interface nxopen.blockstyler.Tree

Returns the ShowExpandCollapseMarker.

showExtendedEyes() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder

Returns the indication if extended eyes will be displayed.

showEyeLabels() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder

Returns the indication if eye labels will be displayed.

showEyePoints() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder

Returns the indication if eye points will be displayed.

showFacesWithoutColorAttrirbute() - Method in interface nxopen.tooling.FaceColorManagementBuilder

The action to show faces without color attributes
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") OR nx_electrode_wizard ("NX Electrode Wizard")
.

showFacetEdge() - Method in interface nxopen.geometricanalysis.ReflectionAnalysisBuilder

Returns the flag indicating if facet edges should be shown.

showFacetEdges() - Method in interface nxopen.display.FacetSettingsBuilder

Returns the state of whether facet edges should be shown for shaded solid and sheet bodies
License requirements: None.

showFacetEdges() - Method in interface nxopen.drawings.ViewWorkflowBuilder

Returns the show facet edges determines whether or not facet edges will be shown on shaded faces when displaying a drawing sheet
License requirements: None.

showFacetEdges() - Method in interface nxopen.preferences.PartDrafting

Returns the flag indicating whether to display facet edges in shaded member views.

showFacetEdges() - Method in interface nxopen.preferences.SessionVisualizationShade

Returns the show facet edge flag.

showFaceWithoutAnyManufacturingInformationButton() - Method in interface nxopen.tooling.FaceColorManagementBuilder

The action to show face without any manufacturing information
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

showFaceWithSameManufacturingInformationButton() - Method in interface nxopen.tooling.FaceColorManagementBuilder

The action to show face with same manufacturing information
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

showFailedElementsLabel() - Method in interface nxopen.cae.modelcheck.ElementQualityCheckBuilder

Returns the value indicating whether to show label for those failed elements
License requirements: None.

showFlag() - Method in interface nxopen.cae.ShowHideBuilder

Returns the show flag
License requirements: None.

showFlag - Variable in class nxopen.uf.UFSket.AskLegacyPreferencesData

showFlowDirectionAndOriginCurve() - Method in interface nxopen.blockstyler.SectionBuilder

Returns the ShowFlowDirectionAndOriginCurve
License requirements: None.

showFlowDirectionAndOriginCurve() - Method in interface nxopen.blockstyler.SuperPoint

Returns the ShowFlowDirectionAndOriginCurve
License requirements: None.

showFlowDirectionAndOriginCurve() - Method in interface nxopen.blockstyler.SuperSection

Returns the ShowFlowDirectionAndOriginCurve
License requirements: None.

showFocusHandle() - Method in interface nxopen.blockstyler.AngularDimension

Returns the ShowFocusHandle
License requirements: None.

showFocusHandle() - Method in interface nxopen.blockstyler.LinearDimension

Returns the ShowFocusHandle
License requirements: None.

showFocusHandle() - Method in interface nxopen.blockstyler.OnPathDimension

Returns the ShowFocusHandle
License requirements: None.

showFocusHandle() - Method in interface nxopen.blockstyler.RadiusDimension

Returns the ShowFocusHandle
License requirements: None.

showFormboardConstraints() - Method in interface nxopen.formboard.FormboardManager

Shows all of the hidden formboard constraints.

showGrid() - Method in interface nxopen.display.DynamicSectionBuilder

Returns the show grid display flag
License requirements: None.

showGrid() - Method in interface nxopen.preferences.WorkPlane

Returns the show and hide grid flag.

showGrid - Variable in class nxopen.uf.UFDisp.Grid

showGroup() - Method in interface nxopen.cae.CaeGroup

Show this group.

showGuides - Variable in class nxopen.cae.Post.AnimationStreamline

showHandle() - Method in interface nxopen.blockstyler.AngularDimension

Returns the ShowHandle
License requirements: None.

showHandle() - Method in interface nxopen.blockstyler.LinearDimension

Returns the ShowHandle.

showHandle() - Method in interface nxopen.blockstyler.RadiusDimension

Returns the ShowHandle
License requirements: None.

showHandleHints() - Method in interface nxopen.preferences.VisualizationHandles

Returns the show handle hints flag.

showHeader() - Method in interface nxopen.blockstyler.Tree

Returns the ShowHeader
License requirements: None.

showHiddenLines() - Method in interface nxopen.drawings.CustomViewSettingsBuilder

Returns the show hidden lines
License requirements: None.

ShowHideBuilder - Interface in nxopen.cae

Represents a ShowHideBuilder
To create a new instance of this class, use ShowHideManager.createShowHideBuilder()

Created in NX5.0.0

ShowHideGroupMethod - Interface in nxopen.cae

Represents the output from the Show Hide Group smart selector method
To obtain an instance of this class use CAE::SmartSelectionManager
.

ShowHideManager - Interface in nxopen.cae

Provides method for creating builder for Show Hide operation commands in a fem/sim part
To obtain an instance of this class, refer to CaePart

Created in NX5.0.0

showHideMgr() - Method in interface nxopen.cae.CaePart

Returns the show hide manager belonging to the part .

showImageInformation() - Method in interface nxopen.ModelingViewHighQualityImage

Shows information about the last image rendered.

showInadequateStretch() - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder

Returns the option to indicate whether to show lack of stretching region or not
License requirements: None.

showInflection() - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord

Deprecated.

Deprecated in NX8.5.0. Use CurveAnalysisDisplay .

showInflectionPoints() - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder

Returns the flag to show the inflection points of planar sections
License requirements: studio_analyze ("STUDIO ANALYZE")
.

showInflections() - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder

Returns the show inflections
License requirements: None.

showInflections - Variable in class nxopen.uf.UFCurve.AnalysisDisplay

showInfo() - Method in interface nxopen.facet.CleanupFacetBodyBuilder

Returns the option to display numbers of various type of defects identified or repaired in the ListingWindow .

showInfo() - Method in interface nxopen.features.SectionInertiaAnalysisBuilder

The function displays the information box with information about the section intertia analysis performed.

showInformationWindow() - Method in interface nxopen.facet.STLImportBuilder

Returns the indicator for whether to show information window
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

showInfoWindow() - Method in interface nxopen.tooling.StandardPartBuilder

Returns the flag to indicate whether to show the Information Window.

showInGraphicView() - Method in interface nxopen.features.ConstructionFeatureData

Returns the construction feature visibility in Graphic View
License requirements: solid_modeling ("SOLIDS MODELING")
.

showInGraphicView() - Method in interface nxopen.features.OutputFeatureData

Returns the output feature visibility in Graphic View
License requirements: solid_modeling ("SOLIDS MODELING")
.

showInterference() - Method in interface nxopen.display.DynamicSectionBuilder

Returns the interference on off flag.

showInteriorFeatureCurves() - Method in interface nxopen.features.sheetmetal.FlatPatternBuilder

Returns the show interior feature curves toggle value
License requirements: None.

showInternalParentFeatureForEdit(Feature) - Method in interface nxopen.features.FeatureBuilder

Unsuppress an internal parent feature (a slave feature) so it can be edited.

showIsoclineNegative() - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder

Returns the negative isocline
License requirements: None.

showIsoclinePositive() - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder

Returns the positive isocline
License requirements: None.

showJoints() - Method in interface nxopen.weld.WeldJointBuilder

Show joints will create joints using the method set by WeldJointBuilder.Types .

showKinematicModelState() - Method in interface nxopen.sim.SimDebugBuilder

Show the kinematic model state
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

showKnot() - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord

Deprecated.

Deprecated in NX8.5.0. Use CurveAnalysisDisplay .

showKnots - Variable in class nxopen.uf.UFCurve.AnalysisDisplay

showLabel() - Method in interface nxopen.blockstyler.LineColorFontWidth

Returns the Show Label flag.

showLabel() - Method in interface nxopen.display.BoundedGridBuilder

Returns the show labels
License requirements: None.

showLabels() - Method in interface nxopen.fields.DisplayPropertiesBuilder

Returns the show labels
License requirements: None.

showLabels() - Method in interface nxopen.preferences.WorkPlane

Returns the show and hide grid labels flag.

showLabels - Variable in class nxopen.uf.UFDisp.Grid

showLabelWithLeader() - Method in interface nxopen.annotations.HoleTableSettingsLabelBuilder

Returns the show hole label with leader
License requirements: None.

showLeadersToggle() - Method in interface nxopen.formboard.PathLengthAnnotationBuilder

Returns the show leaders toggle
License requirements: routing_harness ("Routing Harness")
.

showLockedDeletedContent() - Method in interface nxopen.annotations.TabularNoteStyleBuilder

Returns the locked deleted row method
License requirements: None.

showLockedDeletedRows() - Method in interface nxopen.annotations.PartsListBuilder

Returns the show locked deleted rows option to show rows that are locked, but reference components that have been removed from the assembly
License requirements: None.

showMaintainLayerOption() - Method in interface nxopen.blockstyler.LayerBlock

Returns the Show Maintain Layer Option If set to true, Maintain option is displayed in layer options
License requirements: None.

showMajorLines() - Method in interface nxopen.display.GridBuilder

Returns the show major lines
License requirements: None.

showMapTopo() - Method in interface nxopen.fields.DisplayPropertiesBuilder

Returns the show map topo
License requirements: None.

showMaxLabels() - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder

Returns the show max labels
License requirements: None.

showMergedNodeLabels - Variable in class nxopen.cae.modelcheck.DuplicateNodesCheckBuilder.DisplaySettings

Whether to show merged node labels

showMinLabels() - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder

Returns the show min labels
License requirements: None.

showModelViewBorders() - Method in interface nxopen.preferences.PartVisualizationNamesBorders

Returns the show model view border flag. allows to turn on and off the display of view borders.

showModelViewNames() - Method in interface nxopen.preferences.PartVisualizationNamesBorders

Returns the show model view names flag.

showMoveUpDownButtons() - Method in interface nxopen.blockstyler.ListBox

Returns the ShowMoveUpDownButtons.

showMultipleColumns() - Method in interface nxopen.blockstyler.Tree

Returns the ShowMultipleColumns
License requirements: None.

showNavigator(int, String, String, String) - Method in interface nxopen.shipdesign.NavigatorCollection

Shows the navigator.

showNeedle() - Method in interface nxopen.geometricanalysis.CurveContinuityBuilder

Returns the show needle
License requirements: None.

showNeedles() - Method in interface nxopen.geometricutilities.CombOptionsBuilder

Returns the show needles flag
License requirements: None.

showNextPlot(int, int) - Method in interface nxopen.cae.xyplot.XYPlotManager

Shows the next plot on the view port of specific device
License requirements: nx_ftk ("NX Advanced Graphing")
.

showNodeLabels() - Method in interface nxopen.cae.ProjectNodesToCadGeometryBuilder

Returns a value indicating whether to show the labels for proximity nodes are off underlying CAD geometry.

showNodeLocations() - Method in interface nxopen.cae.ProjectNodesToCadGeometryBuilder

Returns a value indicating whether to show original location and adjusted location for the proximity nodes that are off the underlying CAD geometry by a given tolerance.

showNodesRelatedToDisplayedElements(boolean) - Method in interface nxopen.DisplayManager

Display all nodes related to displayed elements.

showNoncutting() - Method in interface nxopen.cam.PathDisplay

Returns the indicator to display only non cutting moves in a tool path.

showObjects(DisplayableObject[], DisplayManager.LayerSetting) - Method in interface nxopen.DisplayManager

Unblank a set of displayable objects considering the following layer settings if the objects are in invisible layers.

showOnly(DisplayableObject[]) - Method in interface nxopen.DisplayManager

Show a set of displayable objects.

showOnly() - Method in interface nxopen.features.PartModule

Shows all displayable objects of part module and hides all other objects in the part
License requirements: solid_modeling ("SOLIDS MODELING")
.

ShowOnlyBuilder - Interface in nxopen.cae

Represents a ShowOnlyBuilder
To create a new instance of this class, use ShowHideManager.createShowOnlyBuilder()

Created in NX5.0.0

showOnlyGroup() - Method in interface nxopen.cae.CaeGroup

Shows this group only.

showOnlyPartModule() - Method in interface nxopen.features.PartModuleBuilder

Deprecated.

Deprecated in NX9.0.0. Please use PartModule.showOnly() instead.

showOnTop() - Method in interface nxopen.display.GridBuilder

Returns the show on top
License requirements: None.

showOptionLabels() - Method in interface nxopen.blockstyler.LineFont

Returns the show option labels
License requirements: None.

showOrderedAbscissa() - Method in interface nxopen.cae.xyplot.GeneralDisplayStyles2D

Returns a value indicating whether to show the data by ordered abscissa or not
License requirements: None.

showOrderGrid() - Method in interface nxopen.cae.xyplot.GridStyle2DColorContour

Returns the show order grid value
License requirements: None.

showOriginalLayerOption() - Method in interface nxopen.blockstyler.LayerBlock

Returns the Show Original Layer Option If set to true, Original option is displayed in layer options
License requirements: None.

showOutline - Variable in class nxopen.cae.Post.Clipping

showOutline() - Method in interface nxopen.cae.xyplot.BaseBarStyleSetting

Returns a value indicating whether to display the outline
License requirements: None.

showOutline() - Method in interface nxopen.cae.xyplot.BasePlateStyleSetting

Returns a value indicating whether to display the outline
License requirements: None.

showOutline() - Method in interface nxopen.cae.xyplot.SurfaceStyleSetting

Returns a value indicating whether to display the outline
License requirements: None.

showOutOfTolerance() - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder

Returns the out of tolerance only flag
License requirements: None.

showOutRangeLabels() - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder

Returns the show out of range labels
License requirements: solid_modeling ("SOLIDS MODELING")
.

showOverflowAbove - Variable in class nxopen.cae.Post.Colorbar

showOverflowBelow - Variable in class nxopen.cae.Post.Colorbar

showParents(boolean) - Method in interface nxopen.features.Feature

Show the body created by the parent feature
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

showPartAndClearanceHoleOnly() - Method in interface nxopen.tooling.ClearanceManagementBuilder

Returns the option to show selected part and clearance hole only.

showPartingLine() - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder

Returns the show parting line
License requirements: None.

showPath() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder

Returns the indication if demo cylinder path will be displayed.

showPathPoints() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder

Returns the indication if demo cylinder point position on path will be displayed.

showPeak() - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord

Deprecated.

Deprecated in NX8.5.0. Use CurveAnalysisDisplay .

showPeakPoints() - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder

Returns the flag to show the peak points of the sections
License requirements: studio_analyze ("STUDIO ANALYZE")
.

showPeaks() - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder

Returns the show peaks
License requirements: None.

showPeaks - Variable in class nxopen.uf.UFCurve.AnalysisDisplay

showPendulum() - Method in interface nxopen.features.vehicledesign.PendulumPlacementBuilder

Returns the value indicating if this pendulum is displayed.

showPictures() - Method in interface nxopen.cam.Preferences

Returns the show pictures
License requirements: None.

showPipe() - Method in interface nxopen.features.SilhouetteFlangeBuilder

Returns a value that indicates whether to show pipe
License requirements: None.

showPlaneSubBlock() - Method in interface nxopen.blockstyler.OrientXpress

Returns the ShowPlaneSubBlock
License requirements: None.

showPlot() - Method in interface nxopen.cae.responsesimulation.FunctionEvaluationOutputSettings

Returns the option of show plot.

showPoint() - Method in interface nxopen.features.vehicledesign.PendulumPlacementBuilder

Returns the value indicating if the contact point (if any) between this pendulum and the bumper is displayed.

showPoints() - Method in interface nxopen.features.vehicledesign.WindshieldDatumBuilder

Returns the show points to determine whether to create points or not.

showPole() - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord

Deprecated.

Deprecated in NX8.5.0. Use CurveAnalysisDisplay .

showPositioningDimensions() - Method in interface nxopen.features.RPOBuilder

Displays all the positioning dimensions
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.

showPreviousPlot(int, int) - Method in interface nxopen.cae.xyplot.XYPlotManager

Shows the previous plot on the view port of specific device
License requirements: nx_ftk ("NX Advanced Graphing")
.

showProductOutline(boolean) - Method in interface nxopen.assemblies.ProductOutlineManager

Controls the visibility of already defined product outline.

showRays() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder

Returns the indication if the vision rays are created.

showRays() - Method in interface nxopen.features.vehicledesign.WindshieldDatumBuilder

Returns the show rays to determine whether to create ray lines or not.

showReferenceCalloutSuffix() - Method in interface nxopen.annotations.PartsListBuilder

Returns the flag indicating whether the reference callout suffix will be displayed.

showReferenceGeometry() - Method in interface nxopen.layout2d.ComponentSettingsBuilder

Returns the flag to show reference geometry or not
License requirements: None.

showReferenceSubBlock() - Method in interface nxopen.blockstyler.OrientXpress

Returns the ShowReferenceSubBlock
License requirements: None.

ShowRelatedFacesBuilder - Interface in nxopen.features

Represents a builder for a Show Related Faces.

showRemove() - Method in interface nxopen.blockstyler.SetList

Returns the ShowRemove.

showReorderControls() - Method in interface nxopen.blockstyler.SetList

Returns the ShowReorderControls
License requirements: None.

showReport() - Method in interface nxopen.HumanPosturePredictionBuilder

Returns the show report status, if true, then show the report of result
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

showResult() - Method in interface nxopen.tooling.SolidPatchBuilder

Show result button to write the patch and link this information to the list window.

showResults() - Method in interface nxopen.Builder

Updates the model to reflect the result of an edit to the model for all builders that support showing results.

showRetainedAnnotations() - Method in interface nxopen.annotations.RetainedAnnotationsBuilder

Returns the flag indicating to show the retained annotations.

showRetainedNodeLabels - Variable in class nxopen.cae.modelcheck.DuplicateNodesCheckBuilder.DisplaySettings

Whether to show retained node labels

showRiskOfCracks() - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder

Returns the option to indicate whether to show risk of cracks region or not
License requirements: None.

showRotationAngle - Variable in class nxopen.uf.UFDraw.ViewLabelParms

showRotationSymbol - Variable in class nxopen.uf.UFDraw.ViewLabelParms

showRows(int[]) - Method in interface nxopen.tooling.BomListBuilder

Shows the given rows in the BOM List so that all the components of the rows can be exported to spreadsheet.

showScaleValue() - Method in interface nxopen.blockstyler.DoubleBlock

Returns the ShowScaleValue
License requirements: None.

showScaleValue() - Method in interface nxopen.blockstyler.IntegerBlock

Returns the ShowScaleValue
License requirements: None.

showSceneControl() - Method in interface nxopen.blockstyler.OrientXpress

Returns the ShowSceneControl
License requirements: None.

showSectionCurves(boolean) - Method in interface nxopen.display.DynamicSectionBuilder

Shows the section curves in the view associated with the builder.

showSectionLength() - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder

Returns the flag to show the section length labels
License requirements: studio_analyze ("STUDIO ANALYZE")
.

showSectionLine() - Method in interface nxopen.drawings.ViewSectionLineBuilder

Returns the value to show section line with or without view
License requirements: None.

showSelectableProductOutline(boolean) - Method in interface nxopen.assemblies.ProductOutlineManager

Controls the visibility and selectability of already defined product outline.

showSelection() - Method in interface nxopen.blockstyler.SelectElement

Deprecated.

Deprecated in NX11.0.0.

showSelection() - Method in interface nxopen.blockstyler.SelectNode

Deprecated.

Deprecated in NX11.0.0.

showSelfHiddenLines() - Method in interface nxopen.drawings.CustomViewSettingsBuilder

Returns the show self hidden lines
License requirements: None.

showSetting() - Method in interface nxopen.tooling.PocketBuilder

Returns the show or hide value access functions
License requirements: None.

showSevereThinning() - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder

Returns the option to indicate whether to show excessive thinning region or not
License requirements: None.

showShadedFaceEdges - Variable in class nxopen.uf.UFDisp.SystemParams

showShortcuts() - Method in interface nxopen.blockstyler.SpecifyCSYS

Returns the ShowShortcuts
License requirements: None.

showShortcuts() - Method in interface nxopen.blockstyler.SpecifyPlane

Returns the ShowShortcuts
License requirements: None.

showShortcuts() - Method in interface nxopen.blockstyler.SpecifyPoint

Returns the ShowShortcuts
License requirements: None.

showShortcuts() - Method in interface nxopen.blockstyler.SpecifyVector

Returns the ShowShortcuts
License requirements: None.

showSightRays() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder

Returns the indication if blind volume sight rays will be displayed.

showSimuationUiInModeling() - Method in interface nxopen.preferences.SessionModeling

Returns the option to specify whether simulation specific UI should show up in modeling
License requirements: None.

showSmoothEdgeEndGapsLock() - Method in interface nxopen.drawings.CustomViewSettingsBuilder

Returns the show end gaps lock
License requirements: None.

showSmoothEdgeEndGapsValue() - Method in interface nxopen.drawings.CustomViewSettingsBuilder

Returns the show end gaps value
License requirements: None.

showSmoothEdges() - Method in interface nxopen.drawings.CustomViewSettingsBuilder

Returns the show smooth edges
License requirements: None.

showSmoothEdges() - Method in interface nxopen.drawings.ViewStyleSecondaryComponentsBuilder

Returns the Show Smooth Edges toggle on Secondary Geometry tab of View Style Dialog.

showSolids(boolean) - Method in interface nxopen.weld.CustomManager

Method to change display mode of all Weld.PointMarkPoint feature that are fully loaded in an assembly
License requirements: None.

showSolids() - Method in interface nxopen.weld.PointMarkBuilder

Returns the display mode.

showSpinning3dWorkpiece(CAMObject[]) - Method in interface nxopen.cam.CAMSetup

Show spinning 3D workpiece
License requirements: cam_base ("CAM BASE")
.

showSplineMinimumRadius() - Method in interface nxopen.routing.SplinePathBuilder

Returns whether the spline minimum radius value should be displayed or not.

showStandardType - Variable in class nxopen.uf.UFCam.Preferences

showSubItem(int) - Method in interface nxopen.uistyler.MultiSelectList

Requests a list entry to be scrolled up to the first line in the list
License requirements: None.

showSubItem(int) - Method in interface nxopen.uistyler.SelectionBox

Requests that a list entry be scrolled up to the first line in the list.

showSubItem(int) - Method in interface nxopen.uistyler.SingleSelectList

Requests that a list entry be scrolled up to the first line in the list
License requirements: None.

showSubsetStructure() - Method in interface nxopen.assemblies.Subset

Returns the subset structure to be shown or not.

showSurface() - Method in interface nxopen.features.vehicledesign.BaseDataBuilder

Returns the option to indicate whether to show surface or not.

showSurface() - Method in interface nxopen.features.vehicledesign.BaseDataWheelBuilder

Returns the option to indicate whether to show surface or not.

showSurfaceAngles() - Method in interface nxopen.features.shipdesign.OrientationDefinitionBuilder

Returns the indication if the surface angles analysis display is on or off.

showTaskNavigator() - Method in interface nxopen.blockstyler.Wizard

Returns the ShowTaskNavigator.

showTemplateType - Variable in class nxopen.uf.UFCam.Preferences

showThroughAssemblyState() - Method in interface nxopen.weld.WeldPointBuilder

Returns the through assy coordinate system state
License requirements: ugweld ("UG WELD")
.

showThroughDisplay() - Method in interface nxopen.cae.MeshControlDisplayOptionsBuilder

Returns the show through display
License requirements: None.

showThroughWorkPartState() - Method in interface nxopen.weld.WeldPointBuilder

Returns the through work coordinate system state
License requirements: ugweld ("UG WELD")
.

showToolCenter() - Method in interface nxopen.cam.PathDisplay

Returns the indicator to display tool path at the tool center instead of the tool tip for a ball mill.

showToolName - Variable in class nxopen.uf.UFCam.Preferences

showToolPath(CAMObject) - Method in interface nxopen.cam.PathDisplay

Show tool path
License requirements: None.

showToolTips() - Method in interface nxopen.blockstyler.Tree

Returns the ShowToolTips
License requirements: None.

showTorsoLine() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder

Returns the indication if torso line will be displayed.

showTraceLines() - Method in interface nxopen.drawings.CustomViewSettingsBuilder

Returns the show trace lines
License requirements: None.

showTransformVectors() - Method in interface nxopen.features.FreeTransformerBuilder

Returns the option to show temporary transform vectors in preview
License requirements: None.

showTransformVectors() - Method in interface nxopen.features.MeshTransformerBuilder

Returns the option to show temporary transform vectors in preview
License requirements: None.

showTwistRate() - Method in interface nxopen.features.shipdesign.OrientationDefinitionBuilder

Returns the indication if the twist rate analysis display is on or off.

showTypeEnum() - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder

Returns the show type enumeration
License requirements: None.

showUndefinedValues() - Method in interface nxopen.fields.DisplayPropertiesBuilder

Returns the show undefined values
License requirements: None.

showUserDefinedLayerOption() - Method in interface nxopen.blockstyler.LayerBlock

Returns the Show User Defined Layer Option If set to true, User Defined option is displayed in layer options
License requirements: None.

showUVGrids() - Method in interface nxopen.drawings.CustomViewSettingsBuilder

Returns the show uvgrids
License requirements: None.

showVIEndGapsLock() - Method in interface nxopen.drawings.CustomViewSettingsBuilder

Returns the show end gaps lock
License requirements: None.

showVIEndGapsValue() - Method in interface nxopen.drawings.CustomViewSettingsBuilder

Returns the show end gaps value
License requirements: None.

showView(int) - Method in interface nxopen.shipdesign.Navigator

Shows a navigator view.

showViewBorder() - Method in interface nxopen.drawings.DraftingView

Show the view border of the view.

showViewer() - Method in interface nxopen.display.DynamicSectionBuilder

Returns the 2D viewer display flag
License requirements: None.

showViewLabel() - Method in interface nxopen.drawings.ViewDetailLabelBuilder

Returns the show view label
License requirements: None.

showViewLabel() - Method in interface nxopen.drawings.ViewLabelBuilder

Returns the show view label
License requirements: None.

showViewLabel() - Method in interface nxopen.drawings.ViewSectionLabelBuilder

Returns the show view label
License requirements: None.

showViewScale() - Method in interface nxopen.drawings.ViewDetailLabelBuilder

Returns the show view scale
License requirements: None.

showViewScale() - Method in interface nxopen.drawings.ViewLabelBuilder

Returns the show view scale
License requirements: None.

showViewScale() - Method in interface nxopen.drawings.ViewSectionLabelBuilder

Returns the show view scale
License requirements: None.

showVirtualIntersections() - Method in interface nxopen.drawings.CustomViewSettingsBuilder

Returns the show virtual intersections
License requirements: None.

showVirtualIntersections() - Method in interface nxopen.drawings.ViewStyleSecondaryComponentsBuilder

Returns the Show Virtual Intersections toggle on Secondary Geometry tab of View Style Dialog.

showVisionCone() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder

Returns the indication if the vision cone is shown.

showWebAngles() - Method in interface nxopen.features.shipdesign.OrientationDefinitionBuilder

Returns the indication if the web angle analysis display is on or off.

showWidths() - Method in interface nxopen.preferences.PartVisualizationColorSetting

Returns the show widths flag.

showWidths() - Method in interface nxopen.preferences.PartVisualizationLine

Returns the show widths option.

showWidths - Variable in class nxopen.preferences.PartVisualizationLine.WidthOptionsData

the show widths option, which controls whether or not the object width attribute determines the displayed width of lines and curves.

showWidths - Variable in class nxopen.uf.UFDisp.DrawingDisplayData

showWireframe() - Method in interface nxopen.features.vehicledesign.BaseDataBuilder

Returns the option to indicate whether to show curve or not.

showWireframe() - Method in interface nxopen.features.vehicledesign.BaseDataWheelBuilder

Returns the option to indicate whether to show curve or not.

showWorkCsys() - Method in interface nxopen.weld.JointmarkBuilder

Returns the option to control if the work coordinate system should be showing.

showWorkLayerOption() - Method in interface nxopen.blockstyler.LayerBlock

Returns the Show Work Layer Option If set to true, Work option is displayed in layer options
License requirements: None.

showWrinkles() - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder

Returns the option to indicate whether to show wrinkled region or not
License requirements: None.

showWrinklingTendency() - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder

Returns the option to indicate whether to show tendency to wrinkle region or not
License requirements: None.

showXAxis() - Method in interface nxopen.blockstyler.OrientXpress

Returns the ShowXAxis
License requirements: None.

showXmlReport() - Method in interface nxopen.features.shipdesign.CopyObjectsBuilder

Returns the flag to indicate whether or not to show the xml report on copy basic design part results
License requirements: None.

showXmlReport() - Method in interface nxopen.features.shipdesign.CopyPasteNewBuilder

Returns the flag to indicate whether or not to show the xml report on copy paste results
License requirements: None.

showXYPlane() - Method in interface nxopen.blockstyler.OrientXpress

Returns the ShowXYPlane
License requirements: None.

showXZPlane() - Method in interface nxopen.blockstyler.OrientXpress

Returns the ShowXZPlane
License requirements: None.

showYAxis() - Method in interface nxopen.blockstyler.OrientXpress

Returns the ShowYAxis
License requirements: None.

showYZPlane() - Method in interface nxopen.blockstyler.OrientXpress

Returns the ShowYZPlane
License requirements: None.

showZAxis() - Method in interface nxopen.blockstyler.OrientXpress

Returns the ShowZAxis
License requirements: None.

showZeroContour() - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder

Returns the option to show zero curvature contour line.

SHRINK - Static variable in class nxopen.cae.optimization.TBSSmoothBuilder.OriginalSurfaceSmoothingOption

Allows the nodes on original surface to be moved towards the inside only

SHRINK - Static variable in class nxopen.cae.optimization.TBSTestFunction.Direction

Standard Shrinkage

shrinkage() - Method in interface nxopen.tooling.InitProjectBuilder

Returns the shrinkage access functions
License requirements: None.

shrinkFactor - Variable in class nxopen.uf.UFSf.MeshVisuals

shroudColor() - Method in interface nxopen.cam.Preferences

Returns the shroud color
License requirements: None.

shroudGeometry() - Method in interface nxopen.cam.GeometryCiBuilder

Returns the shroud geometry
License requirements: cam_base ("CAM BASE")
.

shroudStock() - Method in interface nxopen.cam.MillCutParameters

Returns the shroud stock
License requirements: None.

shuffleRandomColor() - Method in interface nxopen.preferences.PartVisualizationColorSetting

Allows user to shuffle the Random color
License requirements: None.

SI - Static variable in class nxopen.cae.PreTestExportUnvBuilder.FileUnitsOption

SI: Meter (newton)

SI - Static variable in class nxopen.cae.xyplot.UnitSystem

International standard unit

side - Variable in class nxopen.cae.Post.Clipping

side - Variable in class nxopen.cam.CAMObject.WireEdmFeedRateData

the feed rate side

side() - Method in interface nxopen.cam.CutSides

Returns the Sides to Cut
License requirements: None.

SIDE - Static variable in class nxopen.cam.ToolChangeCiBuilder.HeadDesignationTypes

Side

side() - Method in interface nxopen.features.vehicledesign.PendulumPlacementBuilder

Returns the side to use for positioning this pendulum.

side() - Method in interface nxopen.weld.JointExitBuilder

Returns the side edge preparation values will be applied to
License requirements: None.

side1() - Method in interface nxopen.annotations.Centerline2dBuilder

Returns the side 1 of 2D Centerline for centerline from curves
License requirements: None.

SIDE1 - Static variable in class nxopen.cae.MeshControlBuilder.WeldSide

SIDE1 - Static variable in class nxopen.features.MidSurfaceByFacePairsBuilder.SurfaceType

Use side 1 faces as mid sheet

SIDE1 - Static variable in class nxopen.features.sheetmetal.AeroJoggleBuilder.SideType

Side 1 (only side of single)

SIDE1 - Static variable in class nxopen.features.sheetmetal.BendTaperBuilder.BendTaperSides

Side 1 only

SIDE1 - Static variable in class nxopen.features.sheetmetal.GussetBuilder.WidthSides

The Gusset will be created on the side of plane normal of the user defined profile.

side1 - Variable in class nxopen.uf.UFModeling.AskFacepairParmsData

side1Faces - Variable in class nxopen.cae.AutoPairs.CreateFacePairsData

side 1 faces

side1NormalVectorI() - Method in interface nxopen.cam.InspectionParplnFeatureBuilder

Returns the I component of the normal vector of the plane on the first side of the parpln
License requirements: None.

side1NormalVectorJ() - Method in interface nxopen.cam.InspectionParplnFeatureBuilder

Returns the J component of the normal vector of the plane on the first side of the parpln
License requirements: None.

side1NormalVectorK() - Method in interface nxopen.cam.InspectionParplnFeatureBuilder

Returns the K component of the normal vector of the plane on the first side of the parpln
License requirements: None.

side1Options() - Method in interface nxopen.features.sheetmetal.JoggleBuilder

Returns the joggle side 1 options
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

side1PointX() - Method in interface nxopen.cam.InspectionParplnFeatureBuilder

Returns the X coordinate of the center of the plane on the first side of the parpln
License requirements: None.

side1PointY() - Method in interface nxopen.cam.InspectionParplnFeatureBuilder

Returns the Y coordinate of the center of the plane on the first side of the parpln
License requirements: None.

side1PointZ() - Method in interface nxopen.cam.InspectionParplnFeatureBuilder

Returns the Z coordinate of the center of the plane on the first side of the parpln
License requirements: None.

side1Welds() - Method in interface nxopen.weld.CompoundWeldBuilder

Returns the weld features defining side 1 of the compound weld.

side2() - Method in interface nxopen.annotations.Centerline2dBuilder

Returns the side 2 of 2D Centerline for centerline from curves
License requirements: None.

SIDE2 - Static variable in class nxopen.cae.MeshControlBuilder.WeldSide

SIDE2 - Static variable in class nxopen.features.sheetmetal.AeroJoggleBuilder.SideType

Side 2

SIDE2 - Static variable in class nxopen.features.sheetmetal.BendTaperBuilder.BendTaperSides

Side 2 only

SIDE2 - Static variable in class nxopen.features.sheetmetal.GussetBuilder.WidthSides

The Gusset will be created on the opposite side of the plane normal of the user defined profile.

side2 - Variable in class nxopen.uf.UFModeling.AskFacepairParmsData

side2Faces - Variable in class nxopen.cae.AutoPairs.CreateFacePairsData

side 2 faces

side2NormalVectorI() - Method in interface nxopen.cam.InspectionParplnFeatureBuilder

Returns the I component of the normal vector of the plane on the second side of the parpln
License requirements: None.

side2NormalVectorJ() - Method in interface nxopen.cam.InspectionParplnFeatureBuilder

Returns the J component of the normal vector of the plane on the second side of the parpln
License requirements: None.

side2NormalVectorK() - Method in interface nxopen.cam.InspectionParplnFeatureBuilder

Returns the K component of the normal vector of the plane on the second side of the parpln
License requirements: None.

side2Options() - Method in interface nxopen.features.sheetmetal.JoggleBuilder

Returns the joggle side 2 options
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

side2PointX() - Method in interface nxopen.cam.InspectionParplnFeatureBuilder

Returns the X coordinate of the center of the plane on the second side of the parpln
License requirements: None.

side2PointY() - Method in interface nxopen.cam.InspectionParplnFeatureBuilder

Returns the Y coordinate of the center of the plane on the second side of the parpln
License requirements: None.

side2PointZ() - Method in interface nxopen.cam.InspectionParplnFeatureBuilder

Returns the Z coordinate of the center of the plane on the second side of the parpln
License requirements: None.

side2Welds() - Method in interface nxopen.weld.CompoundWeldBuilder

Returns the weld features defining side 2 of the compound weld.

SIDE_CUT - Static variable in class nxopen.cam.CamOperationMotionType

SIDE_CUT - Static variable in class nxopen.cam.CamPathMotionType

SIDE_LAST_ELEMENT - Static variable in class nxopen.uf.UFPath.Side

SIDE_LEFT - Static variable in class nxopen.uf.UFPath.Side

SIDE_LENGTH - Static variable in class nxopen.SketchPolygonBuilder.SizeType

side length

SIDE_ON - Static variable in class nxopen.uf.UFPath.Side

SIDE_PASSES_FIRST - Static variable in class nxopen.cam.MultiplePassesBuilder.OrderTypes

Side First

SIDE_RIGHT - Static variable in class nxopen.uf.UFPath.Side

SIDE_UNDEFINED - Static variable in class nxopen.uf.UFPath.Side

sideAngle() - Method in interface nxopen.features.sheetmetal.DrawnCutoutBuilder

Returns the Side Angle used by the Drawn Cutout.

sideAngle() - Method in interface nxopen.features.sheetmetal.GussetBuilder

Returns the side angle.

sideAngleBuilder() - Method in interface nxopen.cam.GrooveToolBuilder

Returns the side angle builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.

sideCrossPosition() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder

Returns the cross position type of side barrier.

sideCut() - Method in interface nxopen.cam.PathDisplayColors

Returns the side cut
License requirements: None.

sideEdgeShapeOption() - Method in interface nxopen.features.ExtendSheetBuilder

Returns the direction by which the edge is extended
License requirements: None.

sideFromCenterlineEnum() - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder

Returns the side from centerline enum
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

sideHeightAboveRoad() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder

Returns the expression containing the height above road value of side barrier.

sideIncrement() - Method in interface nxopen.cam.MultiplePassesBuilder

Returns the Side Increment
License requirements: None.

sideLoading() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder

Returns the loading applied to the vehicle side used in the crash barrier.

sideLock - Variable in class nxopen.uf.UFModl.MatchedgeData

sideMargin() - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder

Returns the side margin on each end of the profile.

sideOffset() - Method in interface nxopen.features.OffsetEmbossBuilder

Returns the side offset: Offset from pad boundary to define the sidewall draft.

sideOneSelection() - Method in interface nxopen.features.MidSurfaceByFacePairsBuilder

Returns the side one faces for manual pair
License requirements: None.

sideOverlapPercentage() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder

Returns the expression containing the overlap percentage of side barrier.

sideOverlapSide() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder

Returns the overlap side type of side barrier.

sidePosition() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder

Returns the position type of side barrier.

sidePositionObject() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder

Returns the side position object type of side barrier.

sideRailFeature() - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder

Returns the side rail feature for this head impact study.

sideRefAngle() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

Returns the angle that is used to determine the side reference line
License requirements: None.

sideRefAngleMarginal() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

Returns the marginal angle that is used to determine the side reference line
License requirements: None.

sideRefAngleNcap() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

Returns the European NCAP (New Car Assessment Program) angle that is used to determine the side reference line
License requirements: None.

sideRefAngleNcapMarginal() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

Returns the European NCAP (New Car Assessment Program) marginal angle that is used to determine the side reference line
License requirements: None.

sideReferenceAngleNcapSecondMarginal() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

Returns the European NCAP (New Car Assessment Program) second marginal angle that is used to determine the side reference line
License requirements: None.

sideReferenceAngleSecondMarginal() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

Returns the second marginal angle that is used to determine the side reference line
License requirements: None.

sideSeamDisplay() - Method in interface nxopen.annotations.LineWeldData

Returns the flag indicating whether the side seam is displayed
License requirements: None.

sideSeamHorizontalFlip() - Method in interface nxopen.annotations.LineWeldData

Returns the flag indicating whether the side seam is flipped in the horizontal direction
License requirements: None.

sideSeamObjects() - Method in interface nxopen.annotations.LineWeldBuilder

Returns the side seam object
License requirements: None.

sideSeamVerticalFlip() - Method in interface nxopen.annotations.LineWeldData

Returns the flag indicating whether the side seam is flipped in the vertical direction
License requirements: None.

sideSeamView() - Method in interface nxopen.annotations.LineWeldData

Returns the view for which side seam is to be created.

sideShape() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder

Returns the shape type of side barrier.

sideShift() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder

Returns the expression containing the shift value of side barrier.

sideStepMethod() - Method in interface nxopen.cam.MultiplePassesBuilder

Returns the Side Step Method
License requirements: None.

sidesToCut() - Method in interface nxopen.cam.BladeFinish

Returns the Sides to Cut
License requirements: None.

sidesToCut() - Method in interface nxopen.cam.BlendFinish

Returns the Sides to Cut
License requirements: None.

sideTwoSelection() - Method in interface nxopen.features.MidSurfaceByFacePairsBuilder

Returns the side two faces for manual pair
License requirements: None.

sideUserDefineLength() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder

Returns the user defined width type of side barrier.

sideUserDefineLengthValue() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder

Returns the expression containing the user defined width value of side barrier.

SIDEWALL - Static variable in class nxopen.features.EmbossJoggle.JoggleDirectionMethod

Indicates joggle direction to along sidewall direction.

sidewall() - Method in interface nxopen.features.EmbossRegion

Returns the emboss sidewall object
License requirements: None.

sidewallOption() - Method in interface nxopen.features.EmbossSidewall

Returns the method to create sidewall
License requirements: None.

sidewallType() - Method in interface nxopen.features.sheetmetal.DimpleBuilder

Returns the side where the material must be added to the dimple.

sidewallType() - Method in interface nxopen.features.sheetmetal.DrawnCutoutBuilder

Returns the side where the material must be added to the Drawn Cutout.

SIDEWAYS_OFFSET - Static variable in class nxopen.features.vehicledesign.CloseRangeVisibilityBuilder.EyePointOffsetTypes

Sideways offset

sideWeb() - Method in interface nxopen.tooling.BlankLayoutBuilder

Returns the type of the overlap on the strip.

sign - Variable in class nxopen.uf.UFModeling.AskBooleanWithRetainedOptionsData

sign - Variable in class nxopen.uf.UFModl.SweepTrimObject

SIGNAL - Static variable in class nxopen.mechatronics.GraphControlBuilder.MasterType

Signal

Signal - Interface in nxopen.mechatronics

Represents the Signal class
To create or edit an instance of this class, use SignalBuilder

Created in NX11.0.0

Signal() - Constructor for class nxopen.mechatronics.SignalBuilder.Signal

Signal(NXObject, int, SignalBuilder.IOType, SignalBuilder.DataType, Expression, Expression, Expression) - Constructor for class nxopen.mechatronics.SignalBuilder.Signal

Constructor for the Signal object.

signal() - Method in interface nxopen.motion.SignalChartListItem

Deprecated.

Deprecated in NX8.5.0. Obtain the expression using Motion.SignalChartListItem#signalExpression to query or edit it.

SIGNAL_CHART - Static variable in class nxopen.motion.GraphBuilder.ComponentChoices

Deprecated.

Signal Chart

SignalAdapter - Interface in nxopen.mechatronics

Represents the Signal Adapter class.

SignalAdapterBuilder - Interface in nxopen.mechatronics

Represents a SignalAdapterBuilder .

SignalAdapterBuilder.DataPortType - Class in nxopen.mechatronics

Represents the data port type.

SignalAdapterBuilder.DataType - Class in nxopen.mechatronics

Represents the data type.

SignalAdapterBuilder.ParameterData - Class in nxopen.mechatronics

Defines the parameter data.

SignalAdapterBuilder.SignalData - Class in nxopen.mechatronics

Defines the signal data.

SignalAdapterCollection - Interface in nxopen.mechatronics

Represents a collection of Signal Adapter.

signalAdapters() - Method in interface nxopen.mechatronics.PhysicsManager

Returns the SignalAdapterCollection belonging to this part
Created in NX8.5.0

SignalBuilder - Interface in nxopen.mechatronics

Represents a SignalBuilder builder.

SignalBuilder.DataType - Class in nxopen.mechatronics

Represents the data type.

SignalBuilder.IOType - Class in nxopen.mechatronics

Represents the IO type.

SignalBuilder.Signal - Class in nxopen.mechatronics

Represents Signal definition structure.

signalChart() - Method in interface nxopen.motion.DriverOperation

Returns the signal chart
License requirements: None.

SignalChart - Interface in nxopen.motion

Represents a motion Signal Chart object
To create or edit an instance of this class, use SignalChartBuilder

Created in NX6.0.0

SignalChartBuilder - Interface in nxopen.motion

Represents a SignalChartBuilder
To create a new instance of this class, use SignalChartCollection.createSignalChartBuilder(nxopen.motion.SignalChart)

Created in NX6.0.0

SignalChartBuilder.Type - Class in nxopen.motion

SignalChart type

SignalChartCollection - Interface in nxopen.motion

Represents a collection of motion Signal Chart
To obtain an instance of this class, refer to MotionManager

Created in NX6.0.0

SignalChartListItem - Interface in nxopen.motion

Represents a SignalChartListItem, List Item inside a SignalChartBuilder
To create a new instance of this class, use SignalChartCollection.createSignalChartListItem()

Created in NX6.0.0

SignalChartListItem.Condition - Class in nxopen.motion

signal chart list item condition

SignalChartListItem.Timer - Class in nxopen.motion

time sensor

SignalChartListItemList - Interface in nxopen.motion

Represents a list of objects.

signalCharts() - Method in interface nxopen.motion.MotionManager

Returns the Motion.SignalChartCollection belonging to this part
Created in NX3.0.0

signalChartType() - Method in interface nxopen.motion.SignalChartBuilder

Returns the SignalChart type
License requirements: nx_motion_motor ("NX Motion Motor")
.

SignalCollection - Interface in nxopen.mechatronics

Represents a collection of Signal.

SignalConnection - Interface in nxopen.mechatronics

Represents the Signal connection class.

SignalConnectionBuilder - Interface in nxopen.mechatronics

Represents a SignalConnectionBuilder
To create a new instance of this class, use SignalConnectionCollection.createSignalConnectionBuilder(nxopen.mechatronics.SignalConnection)

Created in NX8.5.0

SignalConnectionBuilder.DataType - Class in nxopen.mechatronics

Represents the OPC signal data type.

SignalConnectionBuilderList - Interface in nxopen.mechatronics

Represents a list of objects.

SignalConnectionCollection - Interface in nxopen.mechatronics

Represents a collection of Signal Connection.

signalConnectionList() - Method in interface nxopen.mechatronics.SignalMappingBuilder

Returns the signal connection builder list
License requirements: None.

signalConnections() - Method in interface nxopen.mechatronics.PhysicsManager

Returns the SignalConnectionCollection belonging to this part
Created in NX8.5.0

SignalData() - Constructor for class nxopen.mechatronics.MATLABClientBuilder.SignalData

SignalData(String, String, String) - Constructor for class nxopen.mechatronics.MATLABClientBuilder.SignalData

Constructor for the SignalData object.

SignalData() - Constructor for class nxopen.mechatronics.SignalAdapterBuilder.SignalData

SignalData(String, SignalAdapterBuilder.DataType, SignalAdapterBuilder.DataPortType, boolean, int, double, Unit, int, AdapterSignal, AdapterFormula, String, String) - Constructor for class nxopen.mechatronics.SignalAdapterBuilder.SignalData

Constructor for the SignalData object.

signalDataType() - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilder

Returns the data type of signal.

signalExpression() - Method in interface nxopen.motion.SignalChartListItem

Returns the threshold expression
License requirements: nx_motion_motor ("NX Motion Motor")
.

signalId - Variable in class nxopen.mechatronics.SignalAdapterBuilder.SignalData

Signal Id

signalIdentify() - Method in interface nxopen.mechatronics.MATLABSignalConnectionBuilder

Returns the signal object.

SignalMappingBuilder - Interface in nxopen.mechatronics

Represents a SignalMappingBuilder
To create a new instance of this class, use PhysicsManager.createSignalMappingBuilder()

Created in NX8.5.0

SignalMappingBuilder.AppOption - Class in nxopen.mechatronics

the application option

signalName() - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilder

Returns the name of signal.

signalname - Variable in class nxopen.mechatronics.MATLABClientBuilder.AvailableItemsData

signalName - Variable in class nxopen.mechatronics.MATLABClientBuilder.TagAttribute

item Name

signalObject() - Method in interface nxopen.mechatronics.GanttOperationConditionBuilder

Returns the signal use to evaluate this condition for the selected property in condition object.

signalObject() - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilder

Returns the signal object.

signalportType - Variable in class nxopen.mechatronics.MATLABClientBuilder.TagAttribute

Port Type

signals() - Method in interface nxopen.mechatronics.PhysicsManager

Returns the SignalCollection belonging to this part
Created in NX11.0.0

signalTag() - Method in interface nxopen.mechatronics.SignalConnectionBuilder

Returns the signal object.

signaltype - Variable in class nxopen.mechatronics.MATLABClientBuilder.AvailableItemsData

signalType - Variable in class nxopen.mechatronics.MATLABClientBuilder.TagAttribute

Data Type

SIGNED_AMPLITUDE - Static variable in class nxopen.cae.PreTestSolutionBuilder.ModeConversionType

No triax sensors required

SIGNED_AMPLITUDE - Static variable in class nxopen.cae.Result.Complex

SIGNED_MAGNITUDE - Static variable in class nxopen.cae.xyplot.ComplexOption2D

Signed magnitude for 2D plot

SIGNED_MAGNITUDE - Static variable in class nxopen.cae.xyplot.ComplexOption2DColorContour

Signed magnitude for 2D color contour plot plot

SIGNED_MAGNITUDE - Static variable in class nxopen.cae.xyplot.ComplexOption3D

Signed magnitude for 3D plot

signedVonMisesStress() - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder

Returns the signedVonMisesStress.

significantPlaces() - Method in interface nxopen.cae.PostAnnotationPreference

Returns the result navigator significant places
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

significantPlaces() - Method in interface nxopen.cae.PostIdentifyPreference

Returns the result navigator significant places
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

significantPlaces() - Method in interface nxopen.cae.PostLegendPreference

Returns the result navigator significant places
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

significantPlaces() - Method in interface nxopen.cae.PostResultNavigatorPreference

Returns the result navigator significant places
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

silhChordTolerance - Variable in class nxopen.uf.UFFacet.Parameters

silhouDisplay() - Method in interface nxopen.cam.MethodBuilder

Returns the sub builder for silhou display
License requirements: None.

silhouDisplay() - Method in interface nxopen.cam.OperationDisplayOptionsBuilder

Returns the sub builder for silhou display
License requirements: None.

SILHOUETTE - Static variable in class nxopen.cam.DisplayPath.PathDisplayTypes

Path Display: Silhouette

SILHOUETTE - Static variable in class nxopen.cam.OperationDisplayOptionsBuilder.PathDisplayTypes

Path Display: Silhouette

SILHOUETTE_CURVE - Static variable in class nxopen.drawings.DraftingCurveInfo.DraftingCurveType

Specifies Silhouette Curve

SILHOUETTE_CURVE_TYPE - Static variable in class nxopen.uf.UFDraw.DraftingCurveType

SILHOUETTE_FILL - Static variable in class nxopen.cam.DisplayPath.PathDisplayTypes

Path Display: Silhouette Fill

SILHOUETTE_FILL - Static variable in class nxopen.cam.OperationDisplayOptionsBuilder.PathDisplayTypes

Path Display: Silhouette Fill

silhouetteChordTolerance - Variable in class nxopen.facet.FacetingParameters

If specifyViewDirection is specified then this is the tolerance which will be used as a tighter surface tolerance in the silhouette area specified by the view direction (this does not apply to JT).

SilhouetteFlange - Interface in nxopen.features

Represents a silhouette flange feature
To create or edit an instance of this class, use SilhouetteFlangeBuilder

Created in NX6.0.0

SilhouetteFlangeBuilder - Interface in nxopen.features

Represents a SilhouetteFlange builder
To create a new instance of this class, use FeatureCollection.createSilhouetteFlangeBuilder(nxopen.features.SilhouetteFlange)
Default values.

SilhouetteFlangeBuilder.OutputSurfaceOptions - Class in nxopen.features

Output surface options

SilhouetteFlangeBuilder.ReferenceDirectionOptions - Class in nxopen.features

Reference direction options

SilhouetteFlangeBuilder.Types - Class in nxopen.features

Silhouette flange creation types

silhouetteMode - Variable in class nxopen.uf.UFView.EdgeDisplayOptions

silhouetteMode - Variable in class nxopen.uf.UFView.Visualization

silhouettes() - Method in interface nxopen.drawings.GeneralViewStyle

Returns the status of silhouettes curves, if true silhouettes for selected drawing member views added else silhouettes removed from the selected member views.

silhouettes() - Method in interface nxopen.drawings.ViewCreationWizardBuilder

Returns the silhouettes
License requirements: None.

silhouettes() - Method in interface nxopen.drawings.ViewStyleGeneralBuilder

Returns the silhouettes toggle on the GENERAL tab of the View Style Dialog
License requirements: None.

silhouettes() - Method in interface nxopen.preferences.GeneralViewPreferences

Returns the status of silhouettes curves, if true silhouettes for selected drawing member views are added else silhouettes are removed from the selected member views.

silhouettes - Variable in class nxopen.preferences.ViewVisualizationVisual.DisplayAppearanceOptions

Allows to control whether the silhouettes (or outlines) on cones, cylinders, spheres, and Tori solid bodies display.

silhouettes - Variable in class nxopen.preferences.ViewVisualizationVisual.SurfaceDisplayOptions

Deprecated.

Allows to control whether the silhouettes (or outlines) on cones, cylinders, spheres, and Tori solid bodies display.

silhouettes - Variable in class nxopen.preferences.ViewVisualizationVisual.TrueSurfaceDisplayPref

Deprecated.

Allows to control whether the silhouettes (or outlines) on cones, cylinders, spheres, and Tori solid bodies display.

silhouettes - Variable in class nxopen.uf.UFDraw.ViewPrfs

SILHOUETTES_OFF - Static variable in class nxopen.uf.UFDraw.Silhouette

SILHOUETTES_ON - Static variable in class nxopen.uf.UFDraw.Silhouette

silhouetteTags - Variable in class nxopen.uf.UFDraw.AskBodySilsInViewData

silhouetteViewDirection - Variable in class nxopen.facet.FacetingParameters

If specifyViewDirection is specified, then this is the view direction to use (this does not apply to JT).

SILHOUTTE - Static variable in class nxopen.cam.CutParametersTrimControlTypes

silhoutte type

silhViewDirection - Variable in class nxopen.uf.UFFacet.Parameters

silTags - Variable in class nxopen.uf.UFDraw.AskFaceSilsInViewData

SILVER_GRAY_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

SIM - Static variable in class nxopen.pdm.CaeCloneManager.CloneOption

Deprecated.

sim() - Method in interface nxopen.UFSession

SIM_MANAGER - Static variable in class nxopen.sim.SimDebugBuilder.DumpType

Dump SimManager

SIM_PART_NEW_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId

SIM_PART_OPEN_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId

SIM_REQT - Static variable in class nxopen.uf.UFGdt.ModifierTypes

SIM_SAVEAS_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId

SIM_SUMMARY_INFO - Static variable in class nxopen.uf.UFSf.ScenarioInfo

SIM_TYPE - Static variable in class nxopen.tooling.ToolingCloneparttype

CAE .sim part

SimAutoBcRecipe - Interface in nxopen.cae

Represents a simulation recipe containing the parameters needed for the generation of a set of face pairs from the faces/bodies in the model
To create a new instance of this class, use SimRecipeCollection.createAutoBcRecipe(java.lang.String, java.lang.String)

Created in NX5.0.0

SimBC - Interface in nxopen.cae

Represents BC class which is a superclass to SimLoad and SimConstraint .

SimBCBuilder - Interface in nxopen.cae

This is a manager to the CAE.SimBC class.

SimBCDisplay - Interface in nxopen.cae

Represents a BC display attributes .

SimBCDisplay.DisplayGridData - Class in nxopen.cae

This class holds the data returned from SimBCDisplay.getDisplayGrid()

SimBCDisplay.Mode - Class in nxopen.cae

Used to specify the display mode for the BC

SimBcGroup - Interface in nxopen.cae

Represents a BC group in a solution or solution step
This is an abstract class.

SimBcPlotContoursBuilder - Interface in nxopen.cae

Represents a SimBcPlotContoursBuilder builder which can be used to generate a plot of a SimBC in the graphics area.

SimBcPlotContoursBuilder.AvailablePropertyNamesAndIndicesToPlotData - Class in nxopen.cae

This class holds the data returned from SimBcPlotContoursBuilder.getAvailablePropertyNamesAndIndicesToPlot(nxopen.cae.SimBC)

SimBcPlotContoursBuilder.PlotType - Class in nxopen.cae

Plot types

SimBcPlotContoursBuilder.ResolveOverlapType - Class in nxopen.cae

Resolve overlap types

SimBcXyPlotBuilder - Interface in nxopen.cae

Represents a SimBcXyPlotBuilder builder which can be used to generate a XY plot of a SimBC in the graphics area.

SimBcXyPlotBuilder.ResolveMultipleMatches - Class in nxopen.cae

Resolve multiple matches when the location specified matches multiple items in the boundary condition's target set

SIMCENTER_FILE_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId

SimCondition - Interface in nxopen.cae

This class represents a Condition which defines a state where all or some values of SimConditionParam are known.

SimConditionCollection - Interface in nxopen.cae

This class is a collection of SimCondition .

SimConditionParam - Interface in nxopen.cae

This class represents a named measurable quantity.

SimConditionParamCollection - Interface in nxopen.cae

This class is a collection of SimConditionParam which represents a measurable environment.

SimConditionSeqMgr - Interface in nxopen.cae

This is the manager for Condition Sequences.

SimConditionSeqMgr.FileFormat - Class in nxopen.cae

Specifies the file format during an import.

SimConditionSequence - Interface in nxopen.cae

This class represents a time history of SimCondition .

SimConditionSequence.OutOfRangeBehavior - Class in nxopen.cae

Specifies behavior of SimConditionSequence.getValue(nxopen.cae.SimConditionParam, double) when time is out of range.

SimConditionSequenceCollection - Interface in nxopen.cae

This class is a collection of SimConditionSequence .

SimConditionTimeStep - Interface in nxopen.cae

This class represents a step in the time history of a SimConditionSequence .

SimConditionTimeStepCollection - Interface in nxopen.cae

This class is a collection of SimConditionTimeStep .

SimConstraint - Interface in nxopen.cae

Represents a constraint
To create a new instance of this class, use SimConstraintCollection.createConstraint(java.lang.String, java.lang.String)

Created in NX4.0.0

SimConstraintCollection - Interface in nxopen.cae

Provides methods for managing constraints SimConstraint in a sim part
To obtain an instance of this class, refer to SimSimulation

Created in NX4.0.0

SimConstraintGroup - Interface in nxopen.cae

Represents a constraint group in a solution or solution step
Not support KF.

SimConstraintSet - Interface in nxopen.cae

Represents a cae constraint set object
To create a new instance of this class, use SimConstraintSetCollection.createConstraintSet(java.lang.String, java.lang.String, int)

Created in NX11.0.0

SimConstraintSetBuilder - Interface in nxopen.cae

Represents a CAE.SimConstraintSetBuilder builder
To create a new instance of this class, use SimSimulation.createConstraintSetBuilder(java.lang.String, nxopen.cae.SimConstraintSet)

Created in NX11.0.0

SimConstraintSetCollection - Interface in nxopen.cae

Provides methods for managing SimConstraintSet in a sim part
To obtain an instance of this class, refer to SimSimulation

Created in NX11.0.0

simDebugBuilder() - Method in interface nxopen.sim.IsvControlPanelBuilder

Returns the sim debug builder
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

SimDebugBuilder - Interface in nxopen.sim

Represents a SimDebugBuilder
To create a new instance of this class, use KinematicConfigurator.createSimDebugBuilder()

Created in NX8.0.0

SimDebugBuilder.DriverType - Class in nxopen.sim

Represents the driver type

SimDebugBuilder.DumpType - Class in nxopen.sim

Represents the dump type

SimDebugBuilder.KinematicModelType - Class in nxopen.sim

Represents the kinematic model type

SimDebugBuilder.OutputType - Class in nxopen.sim

The output type

SimDebugBuilder.PrintoutTagsOrPointersType - Class in nxopen.sim

Represents the printout tags or pointers type

SimDebugBuilder.TraceType - Class in nxopen.sim

Represents the trace type

SimDebugBuilder.UiType - Class in nxopen.sim

Represents the ui type

SimGroupContainer - Interface in nxopen.cae

Represents UGS::CaeSim::LbcGroupContainer
This is an abstract class
.

SIMILAR - Static variable in class nxopen.shapesearch.ShapeSearchBuilder.ShapeSimilarity

search with similar condition

SIMIT - Static variable in class nxopen.mechatronics.PreferencesBuilder.MasterTypes

SIMIT

simitFolder() - Method in interface nxopen.mechatronics.SensorsActuatorsListBuilder

Returns the simit folder name
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

simitTemplate() - Method in interface nxopen.mechatronics.SensorsActuatorsListBuilder

Returns the simit template name
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

SimLbcFolder - Interface in nxopen.cae

Represents a folder object in the .sim files
To create a new instance of this class, use SimLbcFolderCollection.createFolder(java.lang.String, nxopen.cae.SimLbcFolder.Type, nxopen.cae.SimLbcFolder)

Created in NX9.0.0

SimLbcFolder.Type - Class in nxopen.cae

Defines type of Lbc Folder

SimLbcFolderCollection - Interface in nxopen.cae

Provides methods for managing LbcFolders SimLbcFolder in a sim part
To obtain an instance of this class, refer to SimSimulation

Created in NX9.0.0

SimLoad - Interface in nxopen.cae

Represents a load
To create a new instance of this class, use SimLoadCollection.createLoad(java.lang.String, java.lang.String)

Created in NX4.0.0

SimLoadCollection - Interface in nxopen.cae

Provides methods for managing loads SimLoad in a sim part
To obtain an instance of this class, refer to SimSimulation

Created in NX4.0.0

SimLoadGroup - Interface in nxopen.cae

Represents a load group in a solution or solution step
Not support KF.

SimLoadRecipe - Interface in nxopen.cae

This is the class handling the attributes of a load recipe.

SimLoadRecipe.ImportFromCSVFileData - Class in nxopen.cae

This class holds the data returned from SimLoadRecipe.importFromCSVFile(java.lang.String, java.lang.String)

SimLoadRecipeCollection - Interface in nxopen.cae

This class is a collection of SimLoadRecipe .

SimLoadRecipeLbcGenerator - Interface in nxopen.cae

Handles generation of subcases and loads based on a SimLoadRecipe .

SimLoadRecipeLbcGenerator.LbcHierarchyTypes - Class in nxopen.cae

This enum defines the hierarchy type of LBCs to be created by this SimLoadRecipeLbcGenerator .

SimLoadRecipeMapEntry - Interface in nxopen.cae

These objects represent one line in a SimLoadRecipe 's mapping.

SimLoadRecipeMapEntryCollection - Interface in nxopen.cae

This class is a collection of SimLoadRecipeMapEntry s.

SimLoadRecipeMapEntryTargetTypes - Interface in nxopen.cae

The class handles the enum definitions needed by load recipe map entries
No Creator this holds an enum shared by other classes
.

SimLoadRecipeMapEntryTargetTypes.TargetTypes - Class in nxopen.cae

This enum defines the target type options of a SimLoadRecipeMapEntry

SimLoadRecipeMapping - Interface in nxopen.cae

This is the class handling the mapping of a certain load type of a load recipe.

SimLoadRecipeMapping.OrientationTypes - Class in nxopen.cae

How the orientation of loads is mapped

SimLoadRecipeMappingCollection - Interface in nxopen.cae

This class is a collection of SimLoadRecipeMapping s.

SimLoadRecipeSource - Interface in nxopen.cae

This is the class handling the attributes of a source used by a load recipe.

SimLoadRecipeSourceCollection - Interface in nxopen.cae

This class is a collection of SimLoadRecipeSource .

SimLoadRecipeTypes - Interface in nxopen.cae

The class handles the enum definitions needed by load recipes
No Creator this holds an enum shared by other classes
.

SimLoadRecipeTypes.DataTypes - Class in nxopen.cae

This enum defines the Data Type options

SimLoadRecipeTypes.LoadConditionHandling - Class in nxopen.cae

This enum defines the types of Data Source handling

SimLoadSet - Interface in nxopen.cae

Represents a cae load set object
To create a new instance of this class, use SimLoadSetCollection.createLoadSet(java.lang.String, java.lang.String, int)

Created in NX10.0.0

SimLoadSet.Type - Class in nxopen.cae

Load Set type

SimLoadSetBuilder - Interface in nxopen.cae

Represents a SimLoadSetBuilder builder
To create a new instance of this class, use SimSimulation.createLoadSetBuilder(java.lang.String, java.lang.String, nxopen.cae.SimLoadSet, int)

Created in NX10.0.0

SimLoadSetCollection - Interface in nxopen.cae

Provides methods for managing SimLoadSet in a sim part
To obtain an instance of this class, refer to SimSimulation

Created in NX10.0.0

SimMotionLoadsBuilder - Interface in nxopen.cae

Represents a SimMotionLoadsBuilder
To create a new instance of this class, use SimSimulation.createMotionLoadsBuilder()

Created in NX5.0.1

SimMotionLoadsListItemBuilder - Interface in nxopen.cae

Represents a SimMotionLoadsListItemBuilder
To create a new instance of this class, use SimSimulation.createMotionLoadsListItemBuilder()

Created in NX5.0.1

SIMP - Static variable in class nxopen.cae.optimization.TBSTopologySensitivityOptimizationParameters.MaterialInterpolation

Solid Isotropic material with penalization

SimPart - Interface in nxopen.cae

Represents an NX part of type .sim.

SimPart.ImportErrorCodes - Class in nxopen.cae

Contains list of error codes for import of each entity type

SimPart.ImportOptions - Class in nxopen.cae

Contains information about which entities to be imported

SimplData() - Constructor for class nxopen.uf.UFModl.SimplData

SimplData(int, Tag[], int, Tag[], int, Tag[], int, Tag[], int, Tag[], int, Tag[], Tag) - Constructor for class nxopen.uf.UFModl.SimplData

SIMPLE - Static variable in class nxopen.die.AddendumSectionBuilder.SectionShapeType

Section consists of trim ledge, punch radius, and second stretch wall segments.

SIMPLE - Static variable in class nxopen.display.SelPref.Method

chaining method simple

SIMPLE - Static variable in class nxopen.drawings.BrokenViewBuilder.BreakLineStyle

Simple

SIMPLE - Static variable in class nxopen.drawings.ViewBreakBuilder.Viewbreaklinestyle

SIMPLE - Static variable in class nxopen.features.AeroFlangeBuilder.ThicknessDimensionOptions

SIMPLE - Static variable in class nxopen.features.AeroFlangeBuilder.WidthDimensionOptions

SIMPLE - Static variable in class nxopen.features.AeroRibBuilder.HeightDimensionOptions

SIMPLE - Static variable in class nxopen.features.AeroRibBuilder.ThicknessDimensionOptions

SIMPLE - Static variable in class nxopen.features.Hole.Subtype

Simple hole

SIMPLE - Static variable in class nxopen.features.HoleFeatureBuilder.HoleSubtype

Simple hole

SIMPLE - Static variable in class nxopen.features.HolePackageBuilder.HoleForms

Simple hole form

SIMPLE - Static variable in class nxopen.features.PatternFeatureBuilder.PatternMethodOptions

simple

SIMPLE - Static variable in class nxopen.features.SpineCurveBuilder.ArcSegmentsTypes

SIMPLE - Static variable in class nxopen.features.ThroughCurveMeshBuilder.ConstructionMethod

Build the simplest curve mesh surface possible.

SIMPLE - Static variable in class nxopen.features.ThroughCurvesBuilder.ConstructionMethod

Build the simplest mesh surface possible.

SIMPLE - Static variable in class nxopen.features.vehicledesign.CloseRangeDemoCylinderListItemBuilder.ValidateTypes

Simple type

SIMPLE - Static variable in class nxopen.geometricutilities.StartHoleData.HoleForms

Simple hole form

SIMPLE - Static variable in class nxopen.mechatronics.GanttOperationBuilder.OperationType

Simple operation

SIMPLE - Static variable in class nxopen.mechatronics.GanttOperationBuilder.SimpleOperationType

SIMPLE - Static variable in class nxopen.motion.TirePropertyAdvancedParameters.SurfType

simple(String) - Method in interface nxopen.pdm.PdmSearch

Perform simple search in the teamcenter and returns the result vector.

SIMPLE - Static variable in class nxopen.preferences.PartDrafting.BreakLineStyle

Simple

SIMPLE - Static variable in class nxopen.routing.AssignDiscontinuityBuilder.Types

SIMPLE - Static variable in class nxopen.routing.StockStyle

Simple profile.

SIMPLE - Static variable in class nxopen.visualreporting.Classifier.TypeOption

Simple classifier type

SIMPLE_CURVES - Static variable in class nxopen.drawings.ViewCopyTo3dBuilder.OutputOption

simple curves

SIMPLE_FROM_PROFILE - Static variable in class nxopen.ExtrudeTaperDataTaperType

Simple taper from profile

SIMPLE_FROM_PROFILE - Static variable in class nxopen.geometricutilities.SimpleDraft.SimpleDraftType

Draft using the profile as the reference

SIMPLE_FROM_START - Static variable in class nxopen.ExtrudeTaperDataTaperType

Simple taper from start edges

SIMPLE_FROM_START - Static variable in class nxopen.geometricutilities.SimpleDraft.SimpleDraftType

Draft using the start limit as the reference

SIMPLE_HOLE - Static variable in class nxopen.uf.UFModl.HoleType

SIMPLE_OR_STEPPED - Static variable in class nxopen.drawings.SectionLineBuilder.Types

Deprecated.

Creates or edits a SteppedSectionLine

SIMPLE_SECTION - Static variable in class nxopen.features.shipdesign.SectionViewBuilder.SectionRuleOptions

SIMPLE_SOLID - Static variable in class nxopen.routing.StockBuilder.StockStyleType

Simple Solid

SIMPLE_SOLID - Static variable in class nxopen.routing.StockStyleBuilder.StockStyle

SIMPLE_STEPPED - Static variable in class nxopen.drawings.SectionViewBuilder.SectionLineType

SIMPLE_STEPPED - Static variable in class nxopen.drawings.SketchSectionLineBuilder.SectionLineTypes

SIMPLE_SXLINE - Static variable in class nxopen.uf.UFDraw.SxlineType

simpleConstruction() - Method in interface nxopen.features.MeshSurfaceBuilder

Returns
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

SimpleDraft - Interface in nxopen.geometricutilities

Represents an Offset .

SimpleDraft.SimpleDraftType - Class in nxopen.geometricutilities

This enum represents the kind of simple_draft

SimpleDraftingAid - Interface in nxopen.annotations

Represents a simple drafting aid.

SimpleDraftingAid.UserSymbolSizeData - Class in nxopen.annotations

This class holds the data returned from SimpleDraftingAid.getUserSymbolSize()

SimpleDraftingAidPreferences - Interface in nxopen.annotations

Represents simple drafting aid preferences .

simpleGap - Variable in class nxopen.uf.UFModl.SmcornerData

SimpleHoleData() - Constructor for class nxopen.features.Hole.SimpleHoleData

SimpleInterference - Interface in nxopen.geometricanalysis

Represents the Simple Interference object.

SimpleInterference.FaceInterferenceMethod - Class in nxopen.geometricanalysis

Specifies to "find only first pair of interfering faces" or "all pairs of interfering faces" between the input boides.

SimpleInterference.InterferenceMethod - Class in nxopen.geometricanalysis

Specifies interference method, i.e., to highlight interfering faces or create interference solid

SimpleInterference.Result - Class in nxopen.geometricanalysis

Specifies the result of a simple interference check

simpleOrStepped() - Method in interface nxopen.drawings.SectionLineBuilder

Deprecated.

Deprecated in NX10.0.0. Use Drawings.SectionViewBuilder#sectionViewType

simplePoint() - Method in interface nxopen.routing.AssignDiscontinuityBuilder

Returns the Rcp type of the selected object
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

simpleText - Variable in class nxopen.uf.UFDrf.CustomSymbolText

SIMPLIFIED_CURVE - Static variable in class nxopen.drawings.DraftingCurveInfo.DraftingCurveType

Specifies Simplified Curve

SIMPLIFIED_CURVE_TYPE - Static variable in class nxopen.uf.UFDraw.DraftingCurveType

simplifiedBoundaryToggle() - Method in interface nxopen.geometricutilities.PatternFill

Returns the simplifiedBoundaryToggle, a logical flag to indicate a special case for Linear, Circular, Spiral, or Polygon.

simplifiedLayoutType() - Method in interface nxopen.geometricutilities.RectangularPattern

Returns the simplified layout type to be used by the pattern
License requirements: None.

SIMPLIFY - Static variable in class nxopen.drawings.CustomViewSettingsBuilder.Features

SIMPLIFY - Static variable in class nxopen.features.ReplaceFaceBuilder.ReplaceTypes

This stands for simplify type - to simplify the geometry representation of a surface of a face

simplify() - Method in interface nxopen.ListCreator

Returns the m_simplify * - Specifies the simplification tolerance for Defined Level of Detail
License requirements: None.

SIMPLIFY - Static variable in class nxopen.preferences.HiddenLineSmallFeatureOption

Simplify

SIMPLIFY_PATH - Static variable in class nxopen.routing.DesignRuleViolationCollection.Reason

simplifyCurveOption() - Method in interface nxopen.SketchEvaluator

Returns the option which allows the automatic conversion of curves into an approximation of sorted sequence of arcs and lines.

simplifyFacesandEdges() - Method in interface nxopen.Catiav5Importer

Returns the simplify faces and edges - This option allows you to simplify nearly analytical faces and edges to analytics
License requirements: None.

simplifyGeometry() - Method in interface nxopen.AcisImporter

Returns the simplify geometry - if value set to true then imported data will be simplified
License requirements: None.

simplifyGeometry() - Method in interface nxopen.Catiav4Importer

Returns the simplify Geometry - if set to true then imported data will be simplified
License requirements: None.

simplifyGeometry() - Method in interface nxopen.DxfdwgImporter

Returns the SimplifyGeometry command - if set to true then attempt will be made to simplify 3D geometry to analytics
License requirements: None.

simplifyGeometry() - Method in interface nxopen.IgesImporter

Returns the simplify geometry - set this to true if automatic simplification of geometry is desired
License requirements: None.

simplifyGeometry() - Method in interface nxopen.ProeImporter

Returns the simplify geometry - if value set to true then imported data will be simplified
License requirements: None.

simplifyGeometry() - Method in interface nxopen.Step203Importer

Returns the simplify geometry - if set to true geometry will be simplified automatically
License requirements: None.

simplifyGeometry() - Method in interface nxopen.Step214Importer

Returns the simplify geometry - if set to true geometry will be simplified automatically
License requirements: None.

simplifyGeometry() - Method in interface nxopen.Step242Importer

Returns the simplify geometry - if set to true geometry will be simplified automatically
License requirements: None.

simplifyPath() - Method in interface nxopen.mechanicalrouting.CreatePathBuilder

Returns the setting to determine whether to simplify the path by removing collinear extension Routing Control Points.

SimplifyPathBuilder - Interface in nxopen.routing

Represents a SimplifyPathBuilder for Simplify Path operation.

simplifyRcps(int, Tag[]) - Method in interface nxopen.uf.UFRoute

Refer to UF_ROUTE_simplify_rcps for documentation.

simplifySegments(ISegment[], boolean) - Method in interface nxopen.routing.SegmentManager

Combine segments that are collinear and whose intermediate RCPs do not branch
License requirements: routing_base ("Routing Basic")
.

simplifySegments(int, Tag[]) - Method in interface nxopen.uf.UFRoute

Refer to UF_ROUTE_simplify_segments for documentation.

SimplifySegmentsData() - Constructor for class nxopen.uf.UFRoute.SimplifySegmentsData

simplifyShapes() - Method in interface nxopen.cam.MillCutParameters

Returns the Simplify Shapes Method
License requirements: None.

simplifySmallFeatures - Variable in class nxopen.uf.UFDraw.ViewPrfs

simplyEdges() - Method in interface nxopen.features.DeleteEdgeBuilder

Returns the edges to be deleted
License requirements: None.

SimRecipe - Interface in nxopen.cae

This is an abstract class.

SimRecipeCollection - Interface in nxopen.cae

Provides methods for managing SimRecipe in a sim part
To obtain an instance of this class, refer to SimSimulation

Created in NX5.0.0

SimResultReference - Interface in nxopen.cae

Represents a Result Reference in the .sim files.

SimResultReference.ResultFileData - Class in nxopen.cae

This class holds the data returned from SimResultReference.getResultFile()

SimResultReference.Type - Class in nxopen.cae

Result Types

SimSimulation - Interface in nxopen.cae

This is the root object in a .sim file.

SimSimulation.AxisymAbstractionType - Class in nxopen.cae

Used to specify the axisymmetric abstraction type during solution creation.

SimSimulationObject - Interface in nxopen.cae

Represents a simulation object.

SimSimulationObjectCollection - Interface in nxopen.cae

Provides methods for managing simulation objects SimSimulationObject in a sim part
To obtain an instance of this class, refer to SimSimulation

Created in NX4.0.0

SimSimulationObjectGroup - Interface in nxopen.cae

Represents a simulation object group in a solution or solution step
Not support KF.

SimSolution - Interface in nxopen.cae

Represents a solution in the .sim files.

SimSolution.ConflictingBcPairByIndexData - Class in nxopen.cae

This class holds the data returned from SimSolution.getConflictingBcPairByIndex(int)

SimSolution.ConflictingConstraintPairByIndexData - Class in nxopen.cae

This class holds the data returned from SimSolution.getConflictingConstraintPairByIndex(int)

SimSolution.ResultFileData - Class in nxopen.cae

This class holds the data returned from SimSolution.getResultFile()

SimSolution.SetupCheckOption - Class in nxopen.cae

Model Setup Check Options

SimSolution.SolveMode - Class in nxopen.cae

Run Mode Options

SimSolution.SolveOption - Class in nxopen.cae

Solve Options

SimSolution.StepPosition - Class in nxopen.cae

Step creation options

SimSolutionCollection - Interface in nxopen.cae

Provides methods for managing Solutions SimSolution in a SimSimulation
To obtain an instance of this class, refer to SimSimulation

Created in NX7.5.0

SimSolutionStep - Interface in nxopen.cae

Represents a subcase/step in a solution.

SimSolveManager - Interface in nxopen.cae

Represents a SimSolveManager manager which is used to manage the solve process of solutions.

SimSolveManager.ChainOfPrerequisitesData - Class in nxopen.cae

This class holds the data returned from SimSolveManager.getChainOfPrerequisites(nxopen.cae.SimSolution)

SimSolveManager.SolveAllMetaSolutionsData - Class in nxopen.cae

This class holds the data returned from SimSolveManager.solveAllMetaSolutions(nxopen.cae.SimSolution.SolveOption, nxopen.cae.SimSolution.SetupCheckOption, nxopen.cae.SimSolution.SolveMode, boolean)

SimSolveManager.SolveAllSolutionsData - Class in nxopen.cae

This class holds the data returned from SimSolveManager.solveAllSolutions(nxopen.cae.SimSolution.SolveOption, nxopen.cae.SimSolution.SetupCheckOption, nxopen.cae.SimSolution.SolveMode, boolean)

SimSolveManager.SolveChainOfSolutionsData - Class in nxopen.cae

This class holds the data returned from SimSolveManager.solveChainOfSolutions(nxopen.cae.SimSolution[], nxopen.cae.SimSolution.SolveOption, nxopen.cae.SimSolution.SetupCheckOption, nxopen.cae.SimSolution.SolveMode)

SimSolveManagerFactory - Class in nxopen.cae

SimSolveManagerFactory() - Constructor for class nxopen.cae.SimSolveManagerFactory

simStopCb() - Method in interface nxopen.sim.IsvControlPanelBuilder.SimStopCb

Prototype for SimStop callbacks
License requirements: None.

SIMULATE - Static variable in class nxopen.cam.SimulationOptionsBuilder.DialogType

simulate

SIMULATED - Static variable in class nxopen.cam.CenterlineDrillTurningBuilder.OutputOptionTypes

Output Option: Simulated

SIMULATED_ANNEALING - Static variable in class nxopen.optimization.OptimizationBuilder.OptimizationAlgorithmType

Simulated annealing

SIMULATED_HORIZON - Static variable in class nxopen.geometricanalysis.ReflectionAnalysisBuilder.SceneImageType

Simulated horizon.

simulation() - Method in interface nxopen.cae.SimPart

Returns the SimSimulation object
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Created in NX4.0.0

SIMULATION - Static variable in class nxopen.sim.SimDebugBuilder.KinematicModelType

Simulation Kinematic Model

SIMULATION_OBJECT - Static variable in class nxopen.cae.LbcAssociationMgr.BcType

Associate simulation objects

SIMULATION_OBJECT - Static variable in class nxopen.cae.SimLbcFolder.Type

Simulation object type folder

SIMULATION_SETTINGS - Static variable in class nxopen.sim.SimDebugBuilder.DumpType

Dump Simulation Settings

simulationAskFem(Tag) - Method in interface nxopen.uf.UFSf

Refer to UF_SF_simulation_ask_fem for documentation.

simulationDisplay() - Method in interface nxopen.cam.SimulationOptionsBuilder

Returns the option to control the display update.

simulationObjects() - Method in interface nxopen.cae.SimSimulation

Returns the simulation object collection belonging to this sim part .

SimulationOptionsBuilder - Interface in nxopen.cam

Represents a SimulationOptionsBuilder
To create a new instance of this class, use KinematicConfigurator.createSimulationOptionsBuilder(nxopen.cam.SimulationOptionsBuilder.DialogType)

Created in NX6.0.0

simulationOptionsBuilder() - Method in interface nxopen.sim.IsvControlPanelBuilder

Returns the simulation options builder
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

SimulationOptionsBuilder.Accuracy - Class in nxopen.cam

The ipw animation accuracy options

SimulationOptionsBuilder.DialogType - Class in nxopen.cam

the dialog type

SimulationOptionsBuilder.Enable - Class in nxopen.cam

the enable value

SimulationOptionsBuilder.IpwEnable - Class in nxopen.cam

the ipw mode value

SimulationOptionsBuilder.Resolution - Class in nxopen.cam

The ipw resolution options

SimulationOptionsBuilder.SimulationDisplayMode - Class in nxopen.cam

The modes of the simulation display

SimulationOptionsBuilder.Stationary - Class in nxopen.cam

The stationary options

SimulationOptionsBuilder.StockType - Class in nxopen.cam

Gouge Check Stock options

SimulationOptionsBuilder.ToolShapeColl - Class in nxopen.cam

The tool shape for checking options

SimulationOptionsBuilder.ToolShapeMR - Class in nxopen.cam

The tool shape for material removal options

simulationRecipes() - Method in interface nxopen.cae.SimSimulation

Returns the simulation recipe collection belonging to this sim part .

SIMULAYT_LAYUP - Static variable in class nxopen.cae.LaminateImportedLayupBuilder.FileEnum

Simulayt Layup File.

SIMULINK_MDIR - Static variable in class nxopen.uf.UFUi.DialogDirId

SIMULINK_MDL_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId

SIMULINK_MDL_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId

SIMULINK_MFLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId

SINGLE - Static variable in class nxopen.cae.SimLoadRecipeTypes.LoadConditionHandling

Treat all sources as a single load condition

SINGLE - Static variable in class nxopen.cam.CutLevel.RangeTypes

Single

SINGLE - Static variable in class nxopen.cam.FlowBuilder.FlowOffsetModeType

Single Pass

SINGLE - Static variable in class nxopen.cam.RoughFinishTurningBuilder.RegionMachiningTypes

Region Machining type: Single

SINGLE - Static variable in class nxopen.cam.WedmGeomBuilder.BackburnPassesTypes

single backburn pass

SINGLE - Static variable in class nxopen.cam.WedmOperationBuilder.BackburnPassesTypes

single backburn pass

SINGLE - Static variable in class nxopen.CGMBuilder.MultipleOption

Save Multiple sheets as one CGM

SINGLE - Static variable in class nxopen.features.IsoclineCurveBuilder.CurveTypes

SINGLE - Static variable in class nxopen.features.sheetmetal.GussetBuilder.PlacementTypes

One Gusset will be created at an offset from an edge on the selected bend face.

SINGLE - Static variable in class nxopen.features.sheetmetal.JoggleBuilder.LimitTypes

SINGLE - Static variable in class nxopen.features.shipdesign.PenetrationRequest.RequestType

SINGLE - Static variable in class nxopen.features.shipdesign.SectionDrawingBuilder.SectionsPerDrawingOptions

SINGLE - Static variable in class nxopen.features.shipdesign.StiffenerSystemBuilder.OffsetSpacingModes

SINGLE - Static variable in class nxopen.features.ThroughCurvesBuilder.PatchTypes

single patch.

SINGLE - Static variable in class nxopen.geometricutilities.MultiDraft.AngleOption

Sigle draft

SINGLE - Static variable in class nxopen.mechatronics.HydraulicCylinderBuilder.OutputRodType

single rod

SINGLE - Static variable in class nxopen.mechatronics.PneumaticCylinderBuilder.OutputRodType

single rod

single - Variable in class nxopen.uf.UFCgm.CustomWidths

Single() - Constructor for class nxopen.uf.UFCutLevels.Single

Single(Tag, double, double) - Constructor for class nxopen.uf.UFCutLevels.Single

SINGLE - Static variable in class nxopen.weld.WeldPointMethod

use point constructor to generate spot weld points

single() - Method in interface nxopen.WidthDefinition

Returns the single width type selection
License requirements: None.

SINGLE_CHAIN - Static variable in class nxopen.geometricutilities.ReduceSurfaceRadiusBuilder.ReducedFaceTypeSpecification

Preview single chain when using "Select Faces by Chain" and "Single Selection" to select input objects.

SINGLE_CHAIN_IN_GROUP - Static variable in class nxopen.geometricutilities.ReduceSurfaceRadiusBuilder.ReducedFaceTypeSpecification

Preview single item in face group list when using "Select Faces by Radius" to select input objects.

SINGLE_COMPONENT - Static variable in class nxopen.assemblies.ComponentAssembly.SubstitutionMode

An associative substitution is performed.

SINGLE_DESELECTION - Static variable in class nxopen.Selection.UistylerSelectionType

single deselect

SINGLE_DIE - Static variable in class nxopen.tooling.DieBaseBuilder.DieBaseTypeOpt

single die type

SINGLE_DIMENSION - Static variable in class nxopen.annotations.BaseOrdinateDimensionBuilder.Types

singular dimension

SINGLE_DIRECTION - Static variable in class nxopen.cam.RoughFinishTurningBuilder.CutRegionsTypes

Cut regions type: Single Direction

SINGLE_DRAW - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.DrawType

For draw die, punch and binder are lower than die.

SINGLE_ELEMENT - Static variable in class nxopen.cae.ElementConnectivityBuilder.Types

Modify connectivity of selected element.

SINGLE_FACE - Static variable in class nxopen.features.ExtractFaceBuilder.FaceOptionType

single face type

SINGLE_FEATURE - Static variable in class nxopen.features.PatchOpeningsBuilder.OutputTypes

Output one feature containing all patch sheet bodies

SINGLE_FLANGE - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSymbolType

SINGLE_FLANGE - Static variable in class nxopen.annotations.Symbol

Specifiies single flange weld symbol (JIS only)

SINGLE_FRAME - Static variable in class nxopen.annotations.FeatureControlFrameBuilder.FcfFrameStyle

single frame

SINGLE_FRAME - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.FrameStyleOptions

single frame

SINGLE_LINE - Static variable in class nxopen.annotations.FitAssemblyDisplayStyle

Deprecated.

Display single line

SINGLE_LINE - Static variable in class nxopen.annotations.FitAssemblyNewDisplayStyle

Display single line

SINGLE_LINE_FRACTION - Static variable in class nxopen.drawings.ScaleValueFormatTypes

SINGLE_LOCATION - Static variable in class nxopen.formboard.ObjectAttributeReferenceBuilder.LeaderType

Single leader for the annotation of selected object.

SINGLE_MOVES - Static variable in class nxopen.cam.Cycle.MotionOutputTypes

single moves

SINGLE_OFFSET - Static variable in class nxopen.ExtrudeOffsetDataOffsetType

Offset with single distance in one direction

SINGLE_OFFSET - Static variable in class nxopen.geometricutilities.Type

Offset with single distance in one direction

SINGLE_OUTLINE - Static variable in class nxopen.uf.UFModl.PocketpadType

SINGLE_OUTLINE_CORNER - Static variable in class nxopen.uf.UFModl.PocketpadType

SINGLE_OUTLINE_NO_ATTACH - Static variable in class nxopen.uf.UFModl.PocketpadType

SINGLE_PLANE - Static variable in class nxopen.weld.EasyPatternBuilder.SpacingMethodTypes

Use a single plane to cut a sections.

SINGLE_PLATE - Static variable in class nxopen.tooling.DieBaseBuilder.SplitMethod

select single plate

SINGLE_POSITION - Static variable in class nxopen.Selection.UistylerSelectionType

the position is returned if no object is selected with the single select gesture

SINGLE_PROFILE_WITH_FIRST_CUT - Static variable in class nxopen.cam.CAMObject.Attr

SINGLE_REGION - Static variable in class nxopen.cam.RoughFinishTurningBuilder.CutRegionsTypes

Cut regions type: Single Region

SINGLE_SEGMENT - Static variable in class nxopen.features.TubeBuilder.Output

single segment output

SINGLE_SELECT_LIST - Static variable in class nxopen.uistyler.Dialog.ItemType

SINGLE_SELECTION - Static variable in class nxopen.Selection.UistylerSelectionType

allows single select

SINGLE_SELECTION_LIST - Static variable in class nxopen.uistyler.StylerItem.ItemType

Single Selection List item

SINGLE_SIDED - Static variable in class nxopen.drawings.BrokenViewBuilder.TypeBreak

SingleSiled Break

SINGLE_SIDED - Static variable in class nxopen.features.shipdesign.PlateStockBuilder.ThickenOptions

Thickness is applied to only the front side of the offset mold face.

SINGLE_SIDED_COMPARISON - Static variable in class nxopen.validate.RequirementBuilder.DefinitionMethodOptions

SINGLE_SOURCE_MULTIPLE_LINKS - Static variable in class nxopen.features.SketchConversionStatus.ReasonType

The linked Composite Curve feature has multiple curves linked to the same source curve.

SINGLE_SPLINE - Static variable in class nxopen.SketchProjectBuilder.OutputCurve

single spline output

SINGLE_SUM - Static variable in class nxopen.annotations.BillOfMaterialBuilder.StockLengthType

SINGLE_SUM - Static variable in class nxopen.routing.RouteManager.BomStockLength

SINGLE_WIDTH - Static variable in class nxopen.CGMBuilder.Width

Single Width, uses custom widths defined in WidthDefinition

SINGLE_WIDTH - Static variable in class nxopen.PlotColorsWidthsBuilder.Width

Single Width

SINGLE_WIDTH - Static variable in class nxopen.PrintPDFBuilder.Width

Single Width

SINGLE_WIDTH - Static variable in class nxopen.uf.UFCgm.Widths

SINGLE_WIDTH - Static variable in class nxopen.uf.UFPlot.Widths

singleCurveOrEdgeCollector() - Method in interface nxopen.features.PointSetBuilder

Returns the collector that is used to hold a single curve or edge definition.

SingleDevice - Interface in nxopen.routing

The Routing SingleDevice corresponds to an abstract instance of ItemDefinition .

SingleDevice.DeleteObjectResult - Class in nxopen.routing

Deletion result

SingleElementConveyorBuilder - Interface in nxopen.linedesigner

To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createSingleElementConveyorBuilder

Created in NX9.0.0

singleFaceObject() - Method in interface nxopen.features.PointSetBuilder

Returns the select object that is used to hold the face.

singleFaceSet() - Method in interface nxopen.weld.WeldGrooveBuilder

Returns a value indicating whether the single face set is true
License requirements: ugweld ("UG WELD")
.

singleLeg() - Method in interface nxopen.drawings.RevolvedSectionLineBuilder

Deprecated.

Deprecated in NX10.0.0. Use Drawings.SectionLineSegmentsBuilder#singleLeg

singleLeg() - Method in interface nxopen.drawings.SectionLineSegmentsBuilder

Returns the single leg
License requirements: None.

singleLineRepresentation() - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder

Returns the single line representation toggle
License requirements: None.

singleLineRepresentation() - Method in interface nxopen.drawings.ViewStyleShipbuildingLinesBuilder

Returns the Shipbuilding line toggle on the SHIPBUILDING LINES tab of the View Style Dialog
License requirements: None.

SingleMeasure - Interface in nxopen

Represents a single valued measurement .

singleOffset() - Method in interface nxopen.features.ToolingBoxBuilder

Returns the option to control whether the handles operate individually or not.

singleOption() - Method in interface nxopen.cae.AssignNodalCSBuilder

Returns the single option
License requirements: None.

singlePassOffset() - Method in interface nxopen.cam.MillCutParameters

Returns the Single Pass Offset
License requirements: None.

singlePlyPerLayer() - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder

Returns the option to group plies into single layer(s) of extruded elements
License requirements: None.

singlePlyPerLayer() - Method in interface nxopen.cae.LaminateFillSetupBuilder

Returns the option to group plies into single layer(s) of extruded elements
License requirements: None.

singlePosition - Variable in class nxopen.Selection.SelectionDescriptor

singleRoughnessValue() - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder

Returns the single roughness value
License requirements: None.

singleRoughnessValue() - Method in interface nxopen.annotations.SurfaceFinishBuilder

Returns the single roughness value
License requirements: None.

singleSelect() - Method in interface nxopen.blockstyler.ListBox

Returns the SingleSelect.

singleSelection - Variable in class nxopen.Selection.SelectionDescriptor

SingleSelectList - Interface in nxopen.uistyler

Represents a SingleSelectList for UI Styler .

SingleSelectList.Activate - Interface in nxopen.uistyler

Called when a dialog user selects an entry with a single mouse click or presses the spacebar on an already selected item.

SingleSelectList.DoubleClick - Interface in nxopen.uistyler

Called when a dialog user double-clicks on an option or presses Return when an item is already selected.

singleSidedArrowLineLength() - Method in interface nxopen.annotations.SingleSidedDisplayBuilder

Returns the arrow line length on the open side of single sided dimension
License requirements: None.

singleSidedDisplay() - Method in interface nxopen.annotations.StyleBuilder

Returns the single sided display builder
License requirements: None.

SingleSidedDisplayBuilder - Interface in nxopen.annotations

Represents a SingleSidedDisplayBuilder .

singleSidedValue() - Method in interface nxopen.validate.RequirementBuilder

Returns the value for single sided comparison
License requirements: None.

singleSource - Variable in class nxopen.uf.UFCgm.CustomWidths

singleSource() - Method in interface nxopen.WidthDefinition

Returns the single source.

singleStepBackward() - Method in interface nxopen.sim.IsvControlPanelBuilder

Simulation Control Panel: Single Step Backward
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

singleStepForward() - Method in interface nxopen.sim.IsvControlPanelBuilder

Simulation Control Panel: Single Step Forward
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

singleWidth - Variable in class nxopen.uf.UFCgm.CustomWidths

singleWidth() - Method in interface nxopen.WidthDefinition

Returns the single width.

SINGULARITY - Static variable in class nxopen.sim.IsvControlPanelBuilder.DetailType

Singularity

SinumerikCaExportBuilder - Interface in nxopen.sim

This class is used for export a spf file.

SinumerikCaFacetBuilder - Interface in nxopen.sim

This class is used for set the facet tolerance.

SinumerikCaPlaceholderBuilder - Interface in nxopen.sim

This class is used for select or unselect component of the placeholder tools.

SinumerikCaSimplifyBodiesBuilder - Interface in nxopen.sim

This class is used for replace geometry.

SinumerikCaSimplifyBodiesBuilder.CloseGapTypes - Class in nxopen.sim

Represents the close gap types

SinumerikCaSimplifyBodiesBuilder.ObjectToReplaceWithTypes - Class in nxopen.sim

The object to replaces with types

SITE - Static variable in class nxopen.options.LevelType

Site level

SITE - Static variable in class nxopen.preferences.LoadDraftingStandardBuilder.LoadLevel

the site level

SITTING_ACROMIAL_HEIGHT - Static variable in class nxopen.HumanData.AdvancedScalingType

Indicate scaling of sitting_acromial_height

SITTING_EYE_HEIGHT - Static variable in class nxopen.HumanData.AdvancedScalingType

Indicate scaling of sitting_eye_height

SITTING_HEIGHT - Static variable in class nxopen.HumanData.AdvancedScalingType

Indicate scaling of sitting_height

SITTING_KNEE_HEIGHT - Static variable in class nxopen.HumanData.AdvancedScalingType

Indicate scaling of sitting_knee_height

SIX - Static variable in class nxopen.annotations.AutomaticCenterlineBuilder.CenterlineThickness

Width Six

SIX - Static variable in class nxopen.annotations.CenterlineSettingsBuilder.CenterlineThickness

Width Six

SIX - Static variable in class nxopen.annotations.IntersectionSymbolBuilder.Thickness

Width Six

SIX - Static variable in class nxopen.annotations.LineWidth

Width Six

SIX - Static variable in class nxopen.annotations.OffsetCenterPointBuilder.Thickness

Width Six

SIX - Static variable in class nxopen.annotations.TargetPointBuilder.Thickness

Width Six

SIX - Static variable in class nxopen.cae.ModelDisplayBuilder.FreeEdgeWidth

SIX - Static variable in class nxopen.cae.ModelDisplayBuilder.RotationAxisWidth

SIX - Static variable in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeWidth

SIX - Static variable in class nxopen.display.GridBuilder.LineWeightType

SIX - Static variable in class nxopen.DisplayableObject.ObjectWidth

SIX - Static variable in class nxopen.drawings.CustomViewSettingsBuilder.Width

Six

SIX - Static variable in class nxopen.drawings.DrawingCompareSettingsBuilder.WidthType

Deprecated.

Width Six

SIX - Static variable in class nxopen.features.shipdesign.SectionDrawingBuilder.ViewsPerSheetOptions

SIX - Static variable in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Width

SIX - Static variable in class nxopen.geometricanalysis.FaceAnalysisDisplayBuilder.ColorsOptions

Display in 6 colors.

SIX - Static variable in class nxopen.PlaneTypes.AlternateType

Sixth alternate solution

SIX - Static variable in class nxopen.preferences.ViewVisualizationVisual.SmoothEdgeWidth

SIX - Static variable in class nxopen.preferences.Width

Width Six

SIX - Static variable in class nxopen.tooling.BendOperationBuilder.Prebend

six prebends

SIX - Static variable in class nxopen.tooling.DirectUnfoldBuilder.Bend

six bends

SIX - Static variable in class nxopen.tooling.PrebendBuilder.NumberBendsOption

six prebends

SIX - Static variable in class nxopen.ViewDependentDisplayManager.Width

SIX_POINT_NEST - Static variable in class nxopen.cam.InspectionAlignmentAssistantBuilder.AlignType

Six Point Nest alignment type

SIX_SCALARS - Static variable in class nxopen.cae.Result.DataType

Applicable for Result.Quantity.SOLID_LAMINATE_FAILURE_INDEX

SIX_VECTOR - Static variable in class nxopen.cae.Result.DataType

SIXTEEN - Static variable in class nxopen.annotations.FractionDenominatorFormat

SIXTEEN - Static variable in class nxopen.geometricanalysis.ReflectionAnalysisBuilder.NumberOfLinesOptions

16 reflection line.

SIXTH - Static variable in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Wad

Sixth wrap around distance line.

SIXTH - Static variable in class nxopen.weld.WeldGroupIdColor

Sixth Group Id Color Index

SIXTY_FOUR - Static variable in class nxopen.annotations.FractionDenominatorFormat

SIXTY_FOUR - Static variable in class nxopen.geometricanalysis.ReflectionAnalysisBuilder.NumberOfLinesOptions

64 reflection line.

size() - Method in interface nxopen.annotations.Centerline2dSettingsBuilder

Returns the short dash size parameter for 2D Centerline
License requirements: None.

size() - Method in interface nxopen.annotations.Centerline3dSettingsBuilder

Returns the overrun size parameter for 3D Centerline
License requirements: None.

size() - Method in interface nxopen.annotations.CenterMarkSettingsBuilder

Returns the size parameter for centerline.

SIZE - Static variable in class nxopen.annotations.ChamferForm

5 x 5

size() - Method in interface nxopen.annotations.CircleCenterlineSettingsBuilder

Returns the Center Cross Size parameter
License requirements: None.

size() - Method in interface nxopen.annotations.IdSymbolBuilder

Returns the size The circle symbols are measured by diameter, the rounded box is measured by length, and all other symbols are measured by a circumscribed circle
License requirements: None.

size - Variable in class nxopen.annotations.Lettering

Height of a character

size() - Method in interface nxopen.annotations.LineWeldSideData

Returns the weld size
License requirements: None.

size() - Method in interface nxopen.annotations.SelectAnnotationList

Returns the number of objects in the list.

size() - Method in interface nxopen.annotations.SelectBaseCustomSymbolList

Returns the number of objects in the list.

size() - Method in interface nxopen.annotations.SelectOrdinateDimensionList

Returns the number of objects in the list.

size() - Method in interface nxopen.annotations.SelectTableSectionList

Returns the number of objects in the list.

size() - Method in interface nxopen.annotations.SymmetricalCenterlineSettingsBuilder

Returns the offset size parameter
License requirements: None.

size() - Method in interface nxopen.assemblies.SelectComponentList

Returns the number of objects in the list.

SIZE - Static variable in class nxopen.cae.CAEWeldConnectionBuilder.MeshDensityTypeEnum

Size of the each element on the hard object

SIZE - Static variable in class nxopen.cae.LocalRemeshBuilder.Option

Absolute Size

SIZE - Static variable in class nxopen.cae.MeshControlBuilder.CylinderAxialElementSizeType

SIZE - Static variable in class nxopen.cae.MeshControlBuilder.FilletAxialElementSizeType

SIZE - Static variable in class nxopen.cae.MeshControlBuilder.FilletCircumferenceSizeType

size - Variable in class nxopen.cae.Post.Text

size() - Method in interface nxopen.cae.SelectCAEBodyList

Returns the number of objects in the list.

size() - Method in interface nxopen.cae.SelectCAEEdgeList

Returns the number of objects in the list.

size() - Method in interface nxopen.cae.SelectCAEFaceList

Returns the number of objects in the list.

size() - Method in interface nxopen.cae.SelectFEElemFaceList

Returns the number of objects in the list.

size() - Method in interface nxopen.cae.SelectFENodeList

Returns the number of objects in the list.

size() - Method in interface nxopen.cae.SelectMeshList

Returns the number of objects in the list.

size() - Method in interface nxopen.cae.xyplot.TextStyleSetting

Returns the text size.

size() - Method in interface nxopen.cam.HoleBossSet

Returns the Size
License requirements: None.

size() - Method in interface nxopen.cam.SelectCAMFeatureList

Returns the number of objects in the list.

size() - Method in interface nxopen.CGMBuilder

Returns the size of the CGM.

size() - Method in interface nxopen.display.Stage

Deprecated.

Deprecated in NX10.0.0. Use Stage.sizeExpression() instead.

size() - Method in interface nxopen.drawings.SelectDraftingViewList

Returns the number of objects in the list.

size() - Method in interface nxopen.drawings.SelectDrawingViewList

Returns the number of objects in the list.

size() - Method in interface nxopen.facet.SelectFacetedBodyList

Returns the number of objects in the list.

size() - Method in interface nxopen.features.SelectDatumCsysList

Returns the number of objects in the list.

size() - Method in interface nxopen.features.SelectFeatureList

Returns the number of objects in the list.

size() - Method in interface nxopen.features.shipdesign.ShipProfileCutoutBuilder

Returns the profile size
License requirements: None.

size() - Method in interface nxopen.features.shipdesign.SteelDistributionBuilder

Returns the size
License requirements: None.

size() - Method in interface nxopen.features.subdivision.SelectSubdivisionBodyList

Returns the number of objects in the list.

size() - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilder

Deprecated.

Deprecated in NX11.0.0. Use SubdivisionPrimitiveShapeBuilderEx instead.

size() - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilderEx

Returns the size.

size() - Method in interface nxopen.features.subdivision.SubdivisionTubeBuilder

Returns the size of tube in cross section.

size() - Method in interface nxopen.gateway.ImageCaptureBuilder

Returns the size
License requirements: None.

size() - Method in interface nxopen.layout2d.SelectComponentList

Returns the number of objects in the list.

size() - Method in interface nxopen.mechatronics.SelectCollisionSensorList

Returns the number of objects in the list.

size() - Method in interface nxopen.mechatronics.SelectHydraulicCylinderList

Returns the number of objects in the list.

size() - Method in interface nxopen.mechatronics.SelectLogicObjectList

Returns the number of objects in the list.

size() - Method in interface nxopen.mechatronics.SelectPneumaticCylinderList

Returns the number of objects in the list.

size() - Method in interface nxopen.PrintPDFBuilder

Returns the size of the PDF document.

size() - Method in interface nxopen.SelectBodyList

Returns the number of objects in the list.

size() - Method in interface nxopen.SelectCoordinateSystemList

Returns the number of objects in the list.

size() - Method in interface nxopen.SelectCurveList

Returns the number of objects in the list.

size() - Method in interface nxopen.SelectDatumPlaneList

Returns the number of objects in the list.

size() - Method in interface nxopen.SelectDisplayableObjectList

Returns the number of objects in the list.

size() - Method in interface nxopen.SelectEdgeList

Returns the number of objects in the list.

size() - Method in interface nxopen.SelectExpressionList

Returns the number of objects in the list.

size() - Method in interface nxopen.SelectFaceList

Returns the number of objects in the list.

size() - Method in interface nxopen.SelectIBaseCurveList

Returns the number of objects in the list.

size() - Method in interface nxopen.SelectIBasePlaneList

Returns the number of objects in the list.

size() - Method in interface nxopen.SelectICurveList

Returns the number of objects in the list.

size() - Method in interface nxopen.SelectINXObjectList

Returns the number of objects in the list.

size() - Method in interface nxopen.SelectIParameterizedSurfaceList

Returns the number of objects in the list.

size() - Method in interface nxopen.SelectNXObjectList

Returns the number of objects in the list.

size() - Method in interface nxopen.SelectObjectList

Returns the number of objects in the list.

size() - Method in interface nxopen.SelectPartList

Returns the number of objects in the list.

size() - Method in interface nxopen.SelectPointList

Returns the number of objects in the list.

size() - Method in interface nxopen.SelectSplineList

Returns the number of objects in the list.

size() - Method in interface nxopen.SelectTaggedObjectList

Returns the number of objects in the list.

size() - Method in interface nxopen.SketchPolygonBuilder

Returns the size type
License requirements: None.

size - Variable in class nxopen.uf.UFCgm.ExportOptions

Size() - Constructor for class nxopen.uf.UFCgm.Size

Size(UFCgm.SizeMode, double, UFCgm.Dimensions) - Constructor for class nxopen.uf.UFCgm.Size

size - Variable in class nxopen.uf.UFDraw.ArrowParms

size - Variable in class nxopen.uf.UFDrf.DraftAidTextInfo

size - Variable in class nxopen.uf.UFDrf.IdSymbolInfo

size - Variable in class nxopen.uf.UFDrf.Lettering

size - Variable in class nxopen.uf.UFDrf.WeldSymInfo

size - Variable in class nxopen.uf.UFModlFeatures.AskRectPadParms1Data

size - Variable in class nxopen.uf.UFModlFeatures.AskRectPadParmsData

size - Variable in class nxopen.uf.UFSf.EdgeDensityData

SIZE_ANGLE - Static variable in class nxopen.annotations.ChamferForm

5 x 45

SIZE_BY_DIMENSIONS - Static variable in class nxopen.uf.UFCgm.SizeMode

SIZE_BY_SCALE - Static variable in class nxopen.uf.UFCgm.SizeMode

SIZE_TOLERANCE_TYPE - Static variable in class nxopen.uf.UFGdt.ToleranceType

sizeBuilder() - Method in interface nxopen.cam.TurnToolBuilder

Returns the size builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.

sizeCode - Variable in class nxopen.uf.UFDrf.WeldSymInfo

SizeData() - Constructor for class nxopen.annotations.UserSymbolPreferences.SizeData

sizeEnum() - Method in interface nxopen.linedesigner.InsertSheetBuilder

Returns the size enum
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

sizeExpression() - Method in interface nxopen.display.EnvironmentBuilder

Returns the environment size expression
License requirements: studio_render ("UG STUDIO RENDER")
.

sizeExpression() - Method in interface nxopen.display.Stage

Returns the stage size expression
License requirements: None.

sizeFactor() - Method in interface nxopen.drawings.ViewProjectedArrowSettingsBuilder

Returns the size factor
License requirements: None.

sizeFormat() - Method in interface nxopen.annotations.HoleTableSettingsFormatBuilder

Returns the size format
License requirements: None.

SIZEIN_BOUNDING_BOX - Static variable in class nxopen.cae.CfdLocalResolutionConstraintBuilder.ResolutionDensity

SIZEIN_BOUNDING_SPHERE - Static variable in class nxopen.cae.CfdLocalResolutionConstraintBuilder.ResolutionDensity

sizeLaw() - Method in interface nxopen.features.HelixBuilder

Returns the size law
License requirements: None.

sizeLetterCode() - Method in interface nxopen.annotations.LineWeldSideData

Returns the weld size letter code (ISO and DIN only)
License requirements: None.

SizeLetterCode - Class in nxopen.annotations

Specifies the weld size letter code (ISO and DIN only)

sizeList() - Method in interface nxopen.weld.WeldBeadBuilder

Returns the list containing the sizes used to create the bead.

sizeMethod() - Method in interface nxopen.weld.WeldPointBuilder

Returns the measurement size method.

SIZEON_ELEMENTS - Static variable in class nxopen.cae.CfdLocalResolutionConstraintBuilder.ResolutionDensity

SIZEON_OBJECTS - Static variable in class nxopen.cae.CfdLocalResolutionConstraintBuilder.ResolutionDensity

sizeOption() - Method in interface nxopen.cae.LocalRemeshBuilder

Returns the size option
License requirements: None.

sizeOption() - Method in interface nxopen.cam.TurnToolBuilder

Returns the size option
License requirements: None.

sizeOption() - Method in interface nxopen.display.ImageBaseBuilder

Returns the size option
License requirements: None.

sizeOption() - Method in interface nxopen.features.HelixBuilder

Returns the size option
License requirements: None.

sizeOption() - Method in interface nxopen.features.LocalScaleCurveBuilder

Returns a value that indicates which size option is selected
License requirements: None.

sizeOption() - Method in interface nxopen.features.MoveCurveBuilder

Returns a value that indicates which size option is selected
License requirements: None.

sizeOption() - Method in interface nxopen.geometricutilities.HelixPattern

Returns the Helix size option
License requirements: None.

sizePoint() - Method in interface nxopen.SketchPolygonBuilder

Returns the size point
License requirements: None.

sizePrecision() - Method in interface nxopen.tooling.StockSizeBuilder

Returns the size precision of the stock.

sizer() - Method in interface nxopen.tooling.ToolingManager

Returns the SIZERCollection instance belonging to this part .

SIZERCollection - Interface in nxopen.tooling

Represents a collection of SIZER
To obtain an instance of this class, refer to ToolingManager

Created in NX7.5.0

SIZERExportBuilder - Interface in nxopen.tooling

Exports input parameters for motor selection to SIZER drive design to support the sizing, configuration, and selection of drive components.

SIZERExportBuilder.MCDMechanicalData - Class in nxopen.tooling

Defines the mechanical data in MCD mode.

SIZERExportBuilder.MechanicalData - Class in nxopen.tooling

Defines the mechanical data in Motion mode.

SIZERExportBuilder.RunMode - Class in nxopen.tooling

Represents the run mode.

SIZERImportBuilder - Interface in nxopen.tooling

Imports results for motor selection from SIZER drive design based on the sizing, configuration, and selection of drive components.

SIZERImportBuilder.PositionMode - Class in nxopen.tooling

Represents the position mode.

sizeSpiralType() - Method in interface nxopen.geometricutilities.SpiralPattern

Returns the size spiral type
License requirements: None.

sizeString() - Method in interface nxopen.weld.WeldBeadSizeBuilder

Returns the standard size setting.

sizeSubtype() - Method in interface nxopen.cae.MeshControlBuilder

Returns the size type of mesh control
License requirements: nx_masterfem ("Finite Element Modeling")
.

sizeType - Variable in class nxopen.annotations.SimpleDraftingAid.UserSymbolSizeData

Whether the length and height or scale and aspect ratio is used

sizeType - Variable in class nxopen.annotations.UserSymbolPreferences.SizeData

Specifies whether length and height or scale and aspect ratio is used

sizeValue() - Method in interface nxopen.cae.LocalRemeshBuilder

Returns the size value
License requirements: None.

sizingMethod() - Method in interface nxopen.die.PierceItemBuilder

Returns the sizing method
License requirements: None.

sizingOption() - Method in interface nxopen.cae.CfdAutoRefinementConstraintBuilder

Returns the sizing option
License requirements: None.

sizingOption() - Method in interface nxopen.cae.CfdContactPreventionConstraintBuilder

Returns the sizing option
License requirements: None.

sizingOption() - Method in interface nxopen.cae.CfdLocalResolutionConstraintBuilder

Returns the sizing option
License requirements: None.

sizingOption() - Method in interface nxopen.cae.MeshControlBuilder

Returns the sizing option
License requirements: nx_masterfem ("Finite Element Modeling")
.

sket() - Method in interface nxopen.UFSession

sketch() - Method in interface nxopen.cae.GeneralGeometryBeamSectionBuilder

Returns the sketch to define geometry beam section
License requirements: None.

SKETCH - Static variable in class nxopen.drawings.GeneralWorkFlowBuilder.GridSettingsType

SKETCH - Static variable in class nxopen.features.PartGeometryCopyBuilder.Type

Sketch feature

sketch() - Method in interface nxopen.features.PartGeometryCopySelectBuilder

Returns the sketch
License requirements: None.

sketch() - Method in interface nxopen.features.SectionEditBuilder

Returns the sketch which holds the section curves
License requirements: None.

sketch() - Method in interface nxopen.features.sheetmetal.BeadBuilder

Returns the Slave Sketch used by the Bead, If one exists.

sketch() - Method in interface nxopen.features.sheetmetal.BendBuilder

Returns the Sketch
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

sketch() - Method in interface nxopen.features.sheetmetal.ContourFlangeBuilder

Returns the sketch
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

sketch() - Method in interface nxopen.features.sheetmetal.ConvertToSheetmetalBuilder

Returns the internal sketch (used to specify rip curves), if it exists.

sketch() - Method in interface nxopen.features.sheetmetal.DimpleBuilder

Returns the Slave Sketch used by the Dimple, If one exists.

sketch() - Method in interface nxopen.features.sheetmetal.DrawnCutoutBuilder

Returns the Slave Sketch used by the Drawn Cutout, If one exists.

sketch() - Method in interface nxopen.features.sheetmetal.EdgeRipBuilder

Returns the Slave Sketch used by the Edge Rip, If one exists.

sketch() - Method in interface nxopen.features.sheetmetal.JogBuilder

Returns
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

sketch() - Method in interface nxopen.features.sheetmetal.LighteningCutoutBuilder

Returns the Sketch used by Lightening Cutout
License requirements: None.

sketch() - Method in interface nxopen.features.sheetmetal.LouverBuilder

Returns the internal sketch used by the louver's section.

sketch() - Method in interface nxopen.features.sheetmetal.NormalCutoutBuilder

Returns the internal sketch used by the normal cutout, if it exists.

sketch() - Method in interface nxopen.features.sheetmetal.TabBuilder

Returns the sketch of tab
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

sketch() - Method in interface nxopen.features.shipdesign.PenetrationCutoutBuilder

Returns the sketch
License requirements: None.

sketch() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder

Returns the sketch
License requirements: None.

sketch() - Method in interface nxopen.features.SketchFeature

Returns the sketch that is owned by this feature
License requirements: None.

sketch() - Method in interface nxopen.layout2d.InsertComponentBuilder

Returns the sketch to insert the 2D Component
License requirements: None.

SKETCH - Static variable in class nxopen.layout2d.Layout2dComponentMemberType

SKETCH - Static variable in class nxopen.preferences.SessionDrafting.GridObjectType

Sketch Grid

sketch() - Method in interface nxopen.preferences.SessionPreferences

Returns object for doing sketch preferences settings applicable to entire session .

Sketch - Interface in nxopen

Represents a sketch
Use the SketchCollection class to create a sketch.

sketch() - Method in interface nxopen.SketchExpressionModifierBuilder

Returns the sketch
License requirements: None.

SKETCH - Static variable in class nxopen.tooling.WorkpieceBuilder.MethodType

Create block by extrude the sketch

SKETCH - Static variable in class nxopen.weld.WeldBeadBuilder.Types

sketch shape

Sketch.AddEllipseOption - Class in nxopen

Used by Sketch.addGeometry(nxopen.DisplayableObject, nxopen.Sketch.InferConstraintsOption) to determine whether to treat an ellipse as an ellipse or generic conic when adding the curve to a sketch.

Sketch.AlternateSolutionOption - Class in nxopen

Indicates whether the alternate solution should be used instead of the regular solution.

Sketch.AssocType - Class in nxopen

Used in Sketch.DimensionGeometry to indicate what type of geometry to use

Sketch.AutoDimensioningRule - Class in nxopen

Type of Auto Dimensioning rules.

Sketch.ConstraintClass - Class in nxopen

Represents the class of the constraint.

Sketch.ConstraintGeometry - Class in nxopen

Used by the create geometric constraint methods to indicate what geometry the constraint should be applied to.

Sketch.ConstraintGeometryHelp - Class in nxopen

Used by several constraint creation methods that need a help point or parameter to indicate how to create the constraint.

Sketch.ConstraintGeometryHelpType - Class in nxopen

Used in ConstraintHelp to indicate what type of help it is

Sketch.ConstraintPointType - Class in nxopen

Used in ConstraintGeometry to indicate what type of point, if any, the geometry is

Sketch.ConstraintType - Class in nxopen

Represents the type of constraint

Sketch.ConstraintVisibility - Class in nxopen

Deprecated.

Deprecated in NX8.5.0. Please use SessionSketch.displayConstraintSymbols() and SessionSketch.setDisplayConstraintSymbols(boolean)

Sketch.CopyObjectData - Class in nxopen

This structure represents a map between the original object to be copied and the corresponding copied object.

Sketch.CopyObjectsWithDimensionOutputData - Class in nxopen

This class holds the data returned from Sketch.copyObjectsWithDimensionOutput(nxopen.NXObject[])

Sketch.CreateDimensionOption - Class in nxopen

Used in fillet to indicate whether a radius dimension should be created by the fillet

Sketch.CreateInferConstraintSetting - Class in nxopen

Indicates if the infer constraints will be created or not

Sketch.DeleteThirdCurveOption - Class in nxopen

Indicates whether the 3rd curve should be deleted when doing a 3 curve fillet

Sketch.DimensionGeometry - Class in nxopen

Used in the dimension creation methods to indicate what geometry to create the dimension on.

Sketch.DimensionOption - Class in nxopen

Used by Sketch.createDimension(nxopen.Sketch.ConstraintType, nxopen.Sketch.DimensionGeometry, nxopen.Sketch.DimensionGeometry, nxopen.Point3d, nxopen.Expression) , Sketch.createRadialDimension(nxopen.Sketch.DimensionGeometry, nxopen.Point3d, nxopen.Expression) Sketch.createDiameterDimension(nxopen.Sketch.DimensionGeometry, nxopen.Point3d, nxopen.Expression) and Sketch.createPerimeterDimension(nxopen.Curve[], nxopen.Point3d, nxopen.Expression) to determine whether to create driving or reference dimension

Sketch.FilletData - Class in nxopen

This class holds the data returned from Sketch.fillet(nxopen.Curve, nxopen.Curve, nxopen.Point3d, nxopen.Point3d, double, nxopen.Sketch.TrimInputOption, nxopen.Sketch.CreateDimensionOption, nxopen.Sketch.AlternateSolutionOption)

Sketch.InferConstraintsOption - Class in nxopen

Used when adding a point or curve to a sketch.

Sketch.PlaneOption - Class in nxopen

Specifies the plane type used for a Sketch

Sketch.ReferenceDirectionData - Class in nxopen

This class holds the data returned from Sketch.getReferenceDirection()

Sketch.Status - Class in nxopen

Represents the status of the sketch

Sketch.StatusData - Class in nxopen

This class holds the data returned from Sketch.getStatus()

Sketch.TrimInputOption - Class in nxopen

Indicates whether the input curves should be trimmed when doing a fillet

Sketch.UpdateLevel - Class in nxopen

Used to indicate how much the updating should occur

Sketch.ViewReorient - Class in nxopen

Used to indicate whether to reorient the view when the sketch is activated

SKETCH_CONSTRAINT - Static variable in class nxopen.layout2d.Layout2dComponentMemberType

SKETCH_CURVES - Static variable in class nxopen.DxfdwgImporter.ImportCurvesAs

Convert curves as sketch curves

SKETCH_CURVES_ARCS - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter

Sketch Curves arcs filter

SKETCH_CURVES_CIRCLES - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter

Sketch Curves circles filter

SKETCH_CURVES_CONICS - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter

Sketch Curves conics filter

SKETCH_CURVES_LINES - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter

Sketch Curves lines filter

SKETCH_CURVES_SPLINES - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter

Sketch Curves splines filter

SKETCH_DIMENSION - Static variable in class nxopen.cae.optimization.DAODesignVariableBuilder.Variable

Sketch dimension variables

SKETCH_DIMENSION - Static variable in class nxopen.layout2d.Layout2dComponentMemberType

SKETCH_GEOMETRY - Static variable in class nxopen.layout2d.Layout2dComponentMemberType

SKETCH_GEOMETRY_NON_REFERENCE - Static variable in class nxopen.layout2d.Layout2dComponentMemberType

SKETCH_GEOMETRY_REFERENCE - Static variable in class nxopen.layout2d.Layout2dComponentMemberType

SKETCH_GRID - Static variable in class nxopen.uf.UFDisp.GridContext

SKETCH_LINK - Static variable in class nxopen.features.WaveLinkBuilder.Types

SKETCH_NOT_CREATED - Static variable in class nxopen.uf.UFConstants

SKETCH_NOTEBOOK - Static variable in class nxopen.uf.UFDisp.PolyMarker

SKETCH_NOTEBOOK - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker

SKETCH_ONLY - Static variable in class nxopen.Sketch.UpdateLevel

Only update the sketch

SKETCH_PROFILE - Static variable in class nxopen.tooling.DieInsertBuilder.InsertModeItems

The die insert mode is sketch profile

SKETCH_SHARING - Static variable in class nxopen.features.ShipCollection.SteelFeatureApproach

Sketch sharing approach

SKETCH_TYPE - Static variable in class nxopen.features.sheetmetal.NormalCutoutBuilder.TypeOptions

Sketch type normal cutout

SketchAlignmentConstraint - Interface in nxopen

Represents a sketch alignment constraint
Use SketchConstraintBuilder to create an instance of this class.

SketchAlignmentConstraint.Type - Class in nxopen

Represents the alignment type of the constraint

SketchAlongPathBuilder - Interface in nxopen

Use the SketchAlongPathBuilder to create or reattach a Sketch along a path.

SketchAlongPathBuilder.PlaneOrientationType - Class in nxopen

Indicates the orientation of the plane

SketchAlongPathBuilder.SketchOrientationType - Class in nxopen

Indicates the sketch orientation method.

SketchAngularDimensionBuilder - Interface in nxopen

Represents a SketchAngularDimensionBuilder
To create a new instance of this class, use SketchCollection.createAngularDimensionBuilder(nxopen.annotations.AngularDimension)

Created in NX9.0.0

SketchAssociativeTrim - Interface in nxopen

Represents a sketch associative trim constraint
Use SketchCollection.createSketchAssociativeTrimBuilder(nxopen.SketchAssociativeTrim) to create an instance of this class.

SketchAssociativeTrimBuilder - Interface in nxopen

Represents a SketchAssociativeTrimBuilder
To create a new instance of this class, use SketchCollection.createSketchAssociativeTrimBuilder(nxopen.SketchAssociativeTrim)
Default values.

SketchAssociativeTrimBuilder.TrimOption - Class in nxopen

Represents the keep discard options for selected region

SketchAutoConstrainBuilder - Interface in nxopen

Represents a SketchAutoConstrainBuilder
To create a new instance of this class, use SketchCollection.createAutoConstrainBuilder()
Default values.

SketchAutoDimensionBuilder - Interface in nxopen

Represents a SketchAutoDimensionBuilder
To create a new instance of this class, use SketchCollection.createAutoDimensionBuilder()
Default values.

SketchAutoDimensionBuilder.DimType - Class in nxopen

dimension type to be created

sketchBlock() - Method in interface nxopen.EndCutBlockBuilder

Returns the end cut block
License requirements: None.

sketchBlock() - Method in interface nxopen.features.shipdesign.CustomBracketBuilder

Returns the sketch block
License requirements: None.

sketchBlock() - Method in interface nxopen.features.shipdesign.Cutout2Builder

Returns the sketch block.

sketchBlock() - Method in interface nxopen.features.shipdesign.EdgeCutBuilder

Returns the sketch block.

sketchBlock() - Method in interface nxopen.features.shipdesign.ShipCutoutBuilder

Returns the library sketch block that defines the Cutout outline
License requirements: None.

sketchBlock() - Method in interface nxopen.features.shipdesign.SteelVentHolesBuilder

Returns the library sketch block that defines the cut outline
License requirements: None.

sketchBlock() - Method in interface nxopen.features.shipdesign.VentilationHoles2Builder

Returns the sketch block.

sketchBlock() - Method in interface nxopen.features.shipdesign.WeldCutBuilder

Returns the sketch block
License requirements: None.

SketchChamferBuilder - Interface in nxopen

Represents a Chamfer builder
To create a new instance of this class, use SketchCollection.createSketchChamferBuilder()
Default values.

SketchChamferBuilder.ChamferOptions - Class in nxopen

Dialog options for Chamfer Creation

SketchCollection - Interface in nxopen

Represents a collection of sketches
To obtain an instance of this class, refer to Part

Created in NX3.0.0

SketchConicBuilder - Interface in nxopen

Represents a SketchConicBuilder builder
To create a new instance of this class, use SketchCollection.createSketchConicBuilder(nxopen.NXObject)
Default values.

SketchConstraint - Interface in nxopen

Represents a constraint in a sketch.

SketchConstraintBuilder - Interface in nxopen

Represents a SketchConstraint builder
To create a new instance of this class, use SketchCollection.createConstraintBuilder()

Created in NX8.5.0

SketchConstraintBuilder.Constraint - Class in nxopen

the types of the constraint

SketchConversionReport - Interface in nxopen.features

Represents a collection of status of conversion of features to independent sketch.

SketchConversionStatus - Interface in nxopen.features

Represents the status of conversion of features to independent sketch.

SketchConversionStatus.ReasonType - Class in nxopen.features

Reason for partial-success or failure of conversion to sketch

SketchConversionStatus.Type - Class in nxopen.features

Status of conversion - Success, Failure or Partial-Success

SketchCornerBuilder - Interface in nxopen

Create a corner between two sketch curves.

sketchCurves() - Method in interface nxopen.cae.BaseFemPart

Returns the Sketch Curves collection belonging to the part .

SketchCurves - Interface in nxopen.cae

Represents a Beam Cross Section
This is an abstract class
.

SketchCurvesCollection - Interface in nxopen.cae

Represents the collection of all SketchCurves in a fem part
To obtain an instance of this class, refer to BaseFemPart

Created in NX7.5.0

sketchDefaultAction() - Method in interface nxopen.preferences.SessionModeling

Returns the sketch default action
License requirements: None.

SketchDimensionalConstraint - Interface in nxopen

Represents a dimensional constraint
To create an instance of this class refer to Sketch

Created in NX3.0.0

SketchDimensionalConstraint.DimensionStateType - Class in nxopen

Dimension status.

SketchDimensionBuilder - Interface in nxopen

Edit the geometry references of an existing sketch dimension.

SketchDimensionBuilder.ExpOption - Class in nxopen

This enum determines the expression behavior when a dimension is attached to new geometry

SketchedHalfSectionLine - Interface in nxopen.drawings

Sketched Half Section Line is sketch based section line.

SketchEditDefiningSectionBuilder - Interface in nxopen

Represents a SketchEditDefiningSectionBuilder builder.

sketchEditOption() - Method in interface nxopen.preferences.SessionModeling

Returns the option that determines whether or not task environment is used to edit the sketch
License requirements: None.

SketchedPointToPointSectionLine - Interface in nxopen.drawings

Sketched Point to Point Section Line is sketch based section line.

SketchedSteppedSectionLine - Interface in nxopen.drawings

A Sketched Simple or Stepped Section Line is sketch based section line.

SketchEllipseBuilder - Interface in nxopen

Represents a SketchEllipseBuilder builder
To create a new instance of this class, use SketchCollection.createSketchEllipseBuilder(nxopen.NXObject)
Default values.

SKETCHES - Static variable in class nxopen.DisplayManager.ShowHideType

Show or hide sketches

SKETCHES - Static variable in class nxopen.drawings.ViewCopyTo3dBuilder.OutputOption

sketches

sketches() - Method in interface nxopen.features.WaveSketchBuilder

Returns the sketch to link
License requirements: None.

sketches() - Method in interface nxopen.Part

Returns the SketchCollection instance belonging to this part .

sketches() - Method in interface nxopen.SketchExpressionModifierBuilder

Returns the sketches
License requirements: None.

SKETCHES_SOLID - Static variable in class nxopen.drawings.ViewCopyTo3dBuilder.OutputOption

sketches and solid body

SketchEvaluator - Interface in nxopen

Represents a sketch-on-path evaluator.

SketchEvaluatorCollection - Interface in nxopen

Represents a collection of SketchEvaluator .

sketchEvaluators() - Method in interface nxopen.Part

Returns the collection of SketchEvaluator .

SketchExpressionModifierBuilder - Interface in nxopen

Represents a Sketch Expression Modifier Builder.

SketchExpressionModifierBuilder.EndCuts - Class in nxopen

End cut

SketchFeature - Interface in nxopen.features

Represents a sketch feature
This is an abstract class, and cannot be instantiated
.

SketchFitCurveBuilder - Interface in nxopen.features

Sketch Fit Curve builder class.

SKETCHFROM_OTHER_PART - Static variable in class nxopen.features.vehicledesign.TireEnvelopeBuilder.TireDefinitionOption

Use curves from a sketch in another part.

SketchG1Constraint - Interface in nxopen

Represents a sketch G1 constraint
Use FeatureCollection.createSketchSplineBuilder(nxopen.Spline) to create an instance of this class.

SketchG1Constraint.SlopeType - Class in nxopen

Represents the G1 slope type of the constraint

SketchG2Constraint - Interface in nxopen

Represents a sketch G2 constraint
Use FeatureCollection.createSketchSplineBuilder(nxopen.Spline) to create an instance of this class.

SketchGeometricConstraint - Interface in nxopen

Represents a geometric sketch constraint
To create an instance of this class refer to Sketch
.

sketchGroupRelationScope() - Method in interface nxopen.features.CurveFinderBuilder

Returns a value that indicates what kind of sketch group relations are needed to recognize
License requirements: None.

sketchGroupType() - Method in interface nxopen.GroupBuilder

Returns the type of sketch group that gets created
License requirements: None.

SketchHelpedDimensionalConstraint - Interface in nxopen

Represents a dimensional sketch constraint that has a help point or help parameter

.

SketchHelpedGeometricConstraint - Interface in nxopen

Represents a geometric sketch constraint that has a help point or help parameter
To obtain an instance of this class, use Sketch
.

SketchInDraftingBuilder - Interface in nxopen

Use the SketchInDraftingBuilder to create a Sketch on a DraftingView or DrawingSheet .

SketchInPlaceBuilder - Interface in nxopen

Use the SketchInPlaceBuilder to create or reattach a Sketch on a DatumPlane or planar Face .

SketchIntersectionCurve - Interface in nxopen

Represents a Intersection Curve operation inside sketch
To create an instance of this object use SketchIntersectionCurveBuilder

Created in NX5.0.0

SketchIntersectionCurveBuilder - Interface in nxopen

Represents a SketchIntersectionCurve builder
To obtain an instance of this class use SketchCollection.createIntersectionCurveBuilder(nxopen.SketchIntersectionCurve) .

SketchIntersectionPoint - Interface in nxopen

Represents an Intersection Point operation inside sketch
To create an instance of this object use SketchIntersectionPointBuilder

Created in NX5.0.0

SketchIntersectionPointBuilder - Interface in nxopen

Represents a SketchIntersectionPoint builder
To obtain an instance of this class use SketchCollection.createIntersectionPointBuilder(nxopen.SketchIntersectionPoint) .

SketchLinearDimensionBuilder - Interface in nxopen

Represents a SketchLinearDimensionBuilder
To create a new instance of this class, use SketchCollection.createLinearDimensionBuilder(nxopen.annotations.Dimension)

Created in NX9.0.0

SketchMakeSymmetricBuilder - Interface in nxopen

This class is used to add symmetric contraint to objects from a SketchMakeSymmetricBuilder .

SketchMirrorBuilder - Interface in nxopen

This class is used to create a set of mirrored curves from a SketchMirrorBuilder .

SketchMirrorPatternBuilder - Interface in nxopen

Represents a SketchMirrorPatternBuilder
To create a new instance of this class, use SketchCollection.createSketchMirrorPatternBuilder(nxopen.SketchPattern)
Default values.

SketchOffset - Interface in nxopen

Represents a sketch offset constraint
Use SketchCollection.createSketchOffsetBuilder(nxopen.SketchOffset) to create an instance of this class.

SketchOffset.CapType - Class in nxopen

Represents the cap type of the offset

SketchOffsetBuilder - Interface in nxopen

Represents a SketchOffsetBuilder
To create a new instance of this class, use SketchCollection.createSketchOffsetBuilder(nxopen.SketchOffset)
Default values.

sketchOnPath() - Method in interface nxopen.blockstyler.SuperPoint

Returns the SketchOnPath
License requirements: None.

sketchOnPath() - Method in interface nxopen.blockstyler.SuperSection

Returns the SketchOnPath
License requirements: None.

sketchOnPathFeature() - Method in interface nxopen.features.VarsweepBuilder

Returns the sketch on path
License requirements: None.

sketchOrient() - Method in interface nxopen.SketchAlongPathBuilder

Returns the sketch orientation method as SketchAlongPathBuilder.SketchOrientationType
License requirements: None.

sketchOrientation() - Method in interface nxopen.tooling.WireHoleBuilder

Returns the orientation to create wire hole sketch
License requirements: None.

sketchOrigin() - Method in interface nxopen.SketchInPlaceBuilder

Returns the origin point for sketch
License requirements: None.

SketchPasteBuilder - Interface in nxopen

Represents a SketchPasteBuilder
To create a new instance of this class, use SketchCollection.createSketchPasteBuilder(nxopen.Sketch[])
Default values.

SketchPattern - Interface in nxopen

Represents a sketch pattern constraint
Use SketchCollection.createSketchPatternBuilder(nxopen.SketchPattern) to create an instance of this class.

SketchPattern.InstanceControl - Class in nxopen

Represents the type of instance control for circular patterns

SketchPattern.Type - Class in nxopen

Represents the pattern type of the constraint

SketchPatternBuilder - Interface in nxopen

Represents a SketchPatternBuilder
To create a new instance of this class, use SketchCollection.createSketchPatternBuilder(nxopen.SketchPattern)
Default values.

sketchPlane() - Method in interface nxopen.tooling.WireHoleBuilder

Returns the plane to create wire hole sketch
License requirements: None.

sketchPoint() - Method in interface nxopen.tooling.ReusePositioningObjectBuilder

Returns the part sketch point section
License requirements: None.

SketchPolygon - Interface in nxopen

Represents a polygon constraint in a sketch
To create or edit an instance of this class, use SketchPolygonBuilder

Created in NX7.5.0

SketchPolygonBuilder - Interface in nxopen

Represents a SketchPolygon builder
To create a new instance of this class, use SketchCollection.createSketchPolygonBuilder(nxopen.SketchPolygon)
Default values.

SketchPolygonBuilder.SizeType - Class in nxopen

Polygon type

SketchPreferences - Interface in nxopen.preferences

Represents the set of sketch preferences applicable on Sketch object
To obtain an instance of this class, refer to Sketch

Created in NX3.0.0

SketchPreferences.DimensionLabelType - Class in nxopen.preferences

Describes the different options for displaying dimension labels.

SketchProjectBuilder - Interface in nxopen

Represents a SketchProjectBuilder builder
To create a new instance of this class, use SketchCollection.createProjectBuilder(nxopen.features.Feature)
Default values.

SketchProjectBuilder.OutputCurve - Class in nxopen

This enum represents the kind of output curves

SketchQuickExtendBuilder - Interface in nxopen

Represents a SketchQuickExtendBuilder
To create a new instance of this class, use SketchCollection.createQuickExtendBuilder()
Default values.

SketchQuickTrimBuilder - Interface in nxopen

Represents a SketchQuickTrimBuilder
To create a new instance of this class, use SketchCollection.createQuickTrimBuilder()
Default values.

SketchRadialDimensionBuilder - Interface in nxopen

Represents a SketchRadialDimensionBuilder
To create a new instance of this class, use SketchCollection.createRadialDimensionBuilder(nxopen.annotations.Dimension)

Created in NX9.0.0

SketchRapidDimensionBuilder - Interface in nxopen

Represents a SketchRapidDimensionBuilder
To create a new instance of this class, use SketchCollection.createRapidDimensionBuilder()

Created in NX9.0.0

sketchSection() - Method in interface nxopen.drawings.SketchSectionLineBuilder

Returns the sketch section
License requirements: None.

sketchSection() - Method in interface nxopen.features.shipdesign.PenetrationAssociationBuilder

Returns the sketch
License requirements: None.

SketchSectionLineBuilder - Interface in nxopen.drawings

Represents a Drawings.SectionLine builder
To create a new instance of this class, use SectionLineCollection.createSketchSectionLineBuilder(nxopen.drawings.SectionLine)
Default values.

SketchSectionLineBuilder.SectionLineTypes - Class in nxopen.drawings

Section line type

SketchSectionLineBuilder.Type - Class in nxopen.drawings

Section type

SketchSplineBuilder - Interface in nxopen.features

Sketch Spline builder class.

SketchTangentConstraint - Interface in nxopen

Represents a tangent constraint
To create an instance of this object use Sketch.createTangentConstraint(nxopen.Sketch.ConstraintGeometry, nxopen.Sketch.ConstraintGeometryHelp, nxopen.Sketch.ConstraintGeometry, nxopen.Sketch.ConstraintGeometryHelp)

Created in NX3.0.0

SketchTangentToStringConstraint - Interface in nxopen

Represents a sketch tangent to string constraint
Use SketchCollection.createConstraintBuilder() to create an instance of this class.

sketchWorkPlaneEmphasis() - Method in interface nxopen.preferences.SessionVisualizationEmphasis

Returns the setting that controls whether or not objects on the work plane are emphasized in the Sketch Task Environment.

sketStatus - Variable in class nxopen.uf.UFSket.AskSketchStatusData

skew() - Method in interface nxopen.features.BridgeCurveBuilder

Deprecated.

Deprecated in NX8.5.0. Use BridgeCurveBuilderEx instead.

SKEW - Static variable in class nxopen.features.StyledBlendBuilder.StyledBlendShapeControlType

Skew control

skew() - Method in interface nxopen.geometricutilities.DepthSkewBuilder

Returns the skew
License requirements: None.

skew - Variable in class nxopen.uf.UFModl.StycornerCrvOpt

SKEW_ANGLE - Static variable in class nxopen.cae.modelcheck.TestValueTypes.TestType

skewLaw() - Method in interface nxopen.features.StyledBlendBuilder

Returns the skew
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

skinFaceCollector() - Method in interface nxopen.features.AeroFlangeBuilder

Returns the skin face collector
License requirements: None.

skinFaceCollector() - Method in interface nxopen.features.AeroRibBuilder

Returns the skin face collector
License requirements: None.

SKIP - Static variable in class nxopen.cae.PostGraphBuilder.DataErrorHandling

SKIP - Static variable in class nxopen.cae.PostGraphBuilder.EvalutionErrors

SKIP - Static variable in class nxopen.cae.PostGraphBuilder.IncompatibleResult

SKIP - Static variable in class nxopen.cae.ResultProbeBuilder.ErrorHandling

SKIP - Static variable in class nxopen.cae.ResultsCombinationBuilder.EvaluationError

SKIP - Static variable in class nxopen.cae.ResultsCombinationBuilder.IncompatibleResults

SKIP - Static variable in class nxopen.cae.ResultsCombinationBuilder.NoData

SKIP - Static variable in class nxopen.cae.ResultsEnvelopeBuilder.IncompatibleResults

SKIP - Static variable in class nxopen.cae.ResultsEnvelopeBuilder.NoData

SKIP - Static variable in class nxopen.cae.ResultsReductionBuilder.EvaluationError

SKIP - Static variable in class nxopen.cae.ResultsReductionBuilder.IncompatibleResults

SKIP - Static variable in class nxopen.cae.ResultsReductionBuilder.NoData

SKIP - Static variable in class nxopen.cae.TransientResultsReductionBuilder.EvaluationError

SKIP - Static variable in class nxopen.cae.TransientResultsReductionBuilder.IncompatibleResults

SKIP - Static variable in class nxopen.cae.TransientResultsReductionBuilder.NoData

SKIP - Static variable in class nxopen.cam.CutParametersActionWhenGougingTypes

Skip

SKIP - Static variable in class nxopen.cam.DmRotaryFloorFinishBuilder.GougeActionTypes

Skip

SKIP - Static variable in class nxopen.cam.DmSurfBuilder.GougeActionType

Skip

SKIP - Static variable in class nxopen.weld.WeldArcMethod

creates multiple solids

SKIP - Static variable in class nxopen.weld.WeldJointBuilder.SplitTypes

Skip joint.

SKIP_OBJECT_AND_CONTINUE - Static variable in class nxopen.drawings.ConversionProcessSettingsBuilder.ActionOnErrorEnum

SKIP_OVERRIDES - Static variable in class nxopen.routing.DesignRuleViolationViewer.FilterOption

will not show overridden violations

SKIP_TRIMMING - Static variable in class nxopen.features.MidSurfaceByFacePairsBuilder.TrimmingOptionType

Skip trimming for replacement sheets

skipChecking() - Method in interface nxopen.validate.ValidatorOptions

Returns the configuration of skip checking based on result up-to-date status.

skipCheckingDontLoadPart() - Method in interface nxopen.validate.ValidatorOptions

Returns the configuration of skipping checking without loading parts
License requirements: None.

skipedobj - Variable in class nxopen.motion.PostProcess.CreateEnvelopeData

The objects skipped because invisible or not moving

skipEmptyLayer() - Method in interface nxopen.DxfdwgImporter

Returns the SkipEmptyLayer command - if set to true, unreferenced AutoCAD layers will not be transalated
License requirements: None.

skipLabelBegin() - Method in interface nxopen.annotations.FrameBarElementStyleBuilder

Returns the label from which skip to be started
License requirements: None.

skipLabelFrequency() - Method in interface nxopen.annotations.FrameBarElementStyleBuilder

Returns the label skip frequency
License requirements: None.

skipOverriddenResultOption() - Method in interface nxopen.validate.ValidatorOptions

Returns the configuration of skip checking based on result overriden state.

SKIPPED - Static variable in class nxopen.Validation.Result

Validation Skipped

skipSorting(boolean) - Method in interface nxopen.Section

Sets the option to skip sorting the section loops or not.

skipSteps() - Method in interface nxopen.cae.ResultProbeBuilder

Returns the skip steps
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

skipSteps() - Method in interface nxopen.motion.MotionSolutionBuilder

Returns the skipped steps
License requirements: None.

skipTicBegin() - Method in interface nxopen.annotations.FrameBarElementStyleBuilder

Returns the tic from which skip to be started
License requirements: None.

skipTicFrequency() - Method in interface nxopen.annotations.FrameBarElementStyleBuilder

Returns the tic skip frequency
License requirements: None.

slacked - Variable in class nxopen.routing.SplinePathBuilder.IsSplineSlackedData

slacktype - Variable in class nxopen.routing.SplinePathBuilder.IsSplineSlackedData

slackvalue - Variable in class nxopen.routing.SplinePathBuilder.IsSplineSlackedData

SLALOM - Static variable in class nxopen.motion.SegmentBuilder.TypeChoices

Slalom

slalomElevationChange() - Method in interface nxopen.motion.SegmentBuilder

Returns the elevation change of a slalom segment
License requirements: mechanisms ("MECHANISMS")
.

slalomForwardLength() - Method in interface nxopen.motion.SegmentBuilder

Returns the forward length of a slalom segment
License requirements: mechanisms ("MECHANISMS")
.

slantAngle() - Method in interface nxopen.annotations.TableCellStyleBuilder

Returns the slant angle in degrees
License requirements: None.

slaveAxisJoint() - Method in interface nxopen.mechatronics.CouplingBuilder

Returns the slave axis joint.

slaveAxisType() - Method in interface nxopen.mechatronics.CamBuilder

Returns the slave axis type.

slaveMax - Variable in class nxopen.mechatronics.CamProfileBuilder.Element

segment slave max

slaveMaximum() - Method in interface nxopen.mechatronics.CamProfileBuilder

Returns the maximum slave value.

slaveMaximum() - Method in interface nxopen.mechatronics.MotionProfileBuilder

Returns the slaveMax.

slaveMin - Variable in class nxopen.mechatronics.CamProfileBuilder.Element

segment slave min

slaveMinimum() - Method in interface nxopen.mechatronics.CamProfileBuilder

Returns the minimum slave
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

slaveMinimum() - Method in interface nxopen.mechatronics.MotionProfileBuilder

Returns the slaveMin.

slaveMultiple() - Method in interface nxopen.mechatronics.GearBuilder

Returns the slave multiple.

slaveOffset() - Method in interface nxopen.mechatronics.CamBuilder

Returns the slave offset.

slaveOffset() - Method in interface nxopen.mechatronics.GraphControlBuilder

Returns an offset that specifies from the master slave zero point relative to the path zero point for path interpolation.

slavePathsCreated - Variable in class nxopen.routing.OffsetPathCollection.CreateCircularOffsetPathData

The created slave offset paths

slavePathsCreated - Variable in class nxopen.routing.OffsetPathCollection.CreateRectangularOffsetPathData

The created slave offset paths

slaveScaleFactor() - Method in interface nxopen.mechatronics.CamBuilder

Returns the slave scale factor.

slaveScaleFactor() - Method in interface nxopen.mechatronics.GraphControlBuilder

Returns the transformation that is described between the normalized representation to the absolute values.

slaveUnit() - Method in interface nxopen.mechatronics.CamProfileBuilder

Returns the type of slave joint or slave controller
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

slaveUnit() - Method in interface nxopen.mechatronics.GraphControlBuilder

Returns the slave value unit
License requirements: None.

slaveUnit() - Method in interface nxopen.mechatronics.MotionProfileBuilder

Returns the slaveUnit.

SLEEPING - Static variable in class nxopen.assemblies.productinterface.InterfaceObject.InvalidState

product interface is sleep

SLEEVE - Static variable in class nxopen.tooling.EjectorTableBuilder.EjectorType

sleeve ejectors

SLEEVE - Static variable in class nxopen.weld.WeldJointBuilder.WeldTypes

Sleeve joint for pipe welding.

sleeveColorFontWidth() - Method in interface nxopen.weld.WeldJointBuilder

Returns the color, font, and width of the sleeve joint curves.

SLEEVED - Static variable in class nxopen.routing.StockType

Sleeved, e.g., woven nylon

SLEEVED - Static variable in class nxopen.routing.Type

SLICE - Static variable in class nxopen.display.DynamicSectionTypes.Clip

Slice type clip

sliceFormat() - Method in interface nxopen.cae.optimization.TBSSmoothBuilder

Returns the slice format
License requirements: None.

sliceNormalVector() - Method in interface nxopen.cae.optimization.TBSSmoothBuilder

Returns the slice normal vector
License requirements: None.

sliceNumber() - Method in interface nxopen.cae.optimization.TBSSmoothBuilder

Returns the slice number
License requirements: None.

SLIDER - Static variable in class nxopen.motion.JointDefine.Type

This joint type is a single translation.

SLIDER_JOINT - Static variable in class nxopen.motion.ConnectorBuilder.AttachmentType

connector is attacted to slider joint

SLIDER_JOINT - Static variable in class nxopen.uf.UFMotion.JointType

SLIDER_SPRING_DAMPER - Static variable in class nxopen.uf.UFMotion.SpringDamperType

sliding() - Method in interface nxopen.mechatronics.CurveOnCurveJointBuilder

Returns the sliding
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

SLIDING - Static variable in class nxopen.motion.JointFrictionAdams.FrictionEffect

SLIDING - Static variable in class nxopen.motion.JointFrictionRecurDyn.FrictionEffect

SlidingJoint - Interface in nxopen.mechatronics

Represents the Sliding Joint.

SlidingJointBuilder - Interface in nxopen.mechatronics

Represents a SlidingJoint builder.

SlidingJointCollection - Interface in nxopen.mechatronics

Represents a collection of Sliding Joint.

slidingJoints() - Method in interface nxopen.mechatronics.PhysicsManager

Returns the SlidingJointCollection belonging to this part
Created in NX7.5.1

slipForces() - Method in interface nxopen.motion.TirePropertyTnoBuilder

Returns the slip forces type.

slipVelocity() - Method in interface nxopen.motion.CurveContactAdams

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using CurveContactAdams.slipVelocityExpression() to query or edit it.

slipVelocity() - Method in interface nxopen.motion.CurveContactRecurdyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using CurveContactRecurdyn.slipVelocityExpression() to query or edit it.

slipVelocity - Variable in class nxopen.uf.UFMotion.ContactParameters

slipVelocityExpression() - Method in interface nxopen.motion.CurveContactAdams

Returns the slip velocity expression
License requirements: None.

slipVelocityExpression() - Method in interface nxopen.motion.CurveContactRecurdyn

Returns the slip velocity expression
License requirements: None.

SliverFaceMethod - Interface in nxopen.cae

Represents the output from the sliver face smart selector method
To obtain an instance of this class use CAE::SmartSelectionManager
.

sliverTol() - Method in interface nxopen.features.sheetmetal.CleanUpUtilityBuilder

Returns the sliver tolerance
License requirements: None.

slope - Variable in class nxopen.cae.AfuMathFastRMSInfo.Data

the side lobes slope value

slope - Variable in class nxopen.cam.CamOperationHelicalMotionDataType

Slope - Interface in nxopen.features.vehicledesign

Represents a Slope feature
To create or edit an instance of this class, use SlopeBuilder

Created in NX8.5.0

slope - Variable in class nxopen.mechatronics.CamProfileBuilder.Element

point slope

SLOPE - Static variable in class nxopen.Sketch.ConstraintType

slope - Variable in class nxopen.uf.UFCurve.PtSlopeCrvatr

SLOPE - Static variable in class nxopen.uf.UFSket.ConType

slope - Variable in class nxopen.uf.UFStudio.StybldCurveTrans

slope - Variable in class nxopen.uf.UFStudio.StybldShapeTrans

slope2 - Variable in class nxopen.mechatronics.CamProfileBuilder.Element

segment slope of upper end

SLOPE_OF_CURVE - Static variable in class nxopen.SketchConstraintBuilder.Constraint

SlopeAnalysisBuilder - Interface in nxopen.geometricanalysis

Represents a Slope Analysis builder.

SlopeAnalysisBuilder.DisplayModes - Class in nxopen.geometricanalysis

The display type.

slopeAtEndPoint() - Method in interface nxopen.features.GeneralConicBuilder

Returns the slope at end point.

slopeAtStartPoint() - Method in interface nxopen.features.GeneralConicBuilder

Returns the slope at start point.

SlopeBuilder - Interface in nxopen.features.vehicledesign

The builder to create slope feature.

SlopeBuilder.PositionType - Class in nxopen.features.vehicledesign

Represents the slope positions.

SlopeBuilder.RequirementsControlType - Class in nxopen.features.vehicledesign

Represents the requirements control types to define the slope.

SlopeBuilder.VisualizationType - Class in nxopen.features.vehicledesign

Represents the visualization types of the output.

SlopeBuilder.WheelSizeType - Class in nxopen.features.vehicledesign

Represents the wheel size types to calculate slope output.

slopeControl() - Method in interface nxopen.features.SectionSurfaceBuilderEx

Returns the slope control.

slopeEqualNext - Variable in class nxopen.mechatronics.CamProfileBuilder.Element

if the segment slope equal with the next segment

slopeEqualPrev - Variable in class nxopen.mechatronics.CamProfileBuilder.Element

if the segment slope equal with the previous segment

slopeNode() - Method in interface nxopen.geometricutilities.SShapedLawBuilder

Returns the slope node
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

slopeType - Variable in class nxopen.uf.UFCurve.PtSlopeCrvatr

Slot() - Constructor for class nxopen.mechatronics.ExpressionBlockBuilder.Slot

Slot(ExpressionBlockBuilder.SlotType, String, ExpressionBlockBuilder.DataType, boolean, int, double, Unit, String, String, NXObject, int) - Constructor for class nxopen.mechatronics.ExpressionBlockBuilder.Slot

Constructor for the Slot object.

SLOT_DATUM_LOCATION - Static variable in class nxopen.uf.UFConstants

SLOT_DATUM_LOCATION_NON_ASSOC - Static variable in class nxopen.uf.UFConstants

SLOT_FEATURE - Static variable in class nxopen.uf.UFGdt.FeatureType

SLOT_HOR - Static variable in class nxopen.tooling.DieCavityAndSlugHoleBuilder.BottomPlateSlugItems

Bottom plate slug type is slot horizontal

SLOT_HOR - Static variable in class nxopen.tooling.DieCavityAndSlugHoleBuilder.DieShoeSlugTypeItems

Die shoe slug type is slot horizontal

SLOT_HOR - Static variable in class nxopen.tooling.PiercingInsertBuilder.NormalBbpslugType

Bottom plate slug type is slot horizontal

SLOT_HOR - Static variable in class nxopen.tooling.PiercingInsertBuilder.NormalDsslugType

Die shoe slug type is slot horizontal

SLOT_HOR - Static variable in class nxopen.tooling.SpecialPiercingInsertBuilder.NormalBottomBackingPlateSlugType

Bottom backing plate slug type is slot horizontal

SLOT_HOR - Static variable in class nxopen.tooling.SpecialPiercingInsertBuilder.NormalDieShoeSlugType

Die shoe slug type is slot horizontal

SLOT_MEASUREMENT_LOCATION - Static variable in class nxopen.uf.UFConstants

SLOT_MEASUREMENT_LOCATION_NON_ASSOC - Static variable in class nxopen.uf.UFConstants

SLOT_NA_TYPE - Static variable in class nxopen.uf.UFWeld.Types

SLOT_TAB - Static variable in class nxopen.cam.CamInspectionOperationFeaturetypes

Slot or Tab

SLOT_TAB - Static variable in class nxopen.cam.InspectionConstructedFeatureBuilder.ConstFeatType

Constructed Slot/Tab Feature

SLOT_TAB - Static variable in class nxopen.cam.InspectionMethodBuilder.MethodTypes

Slot Tab

SLOT_TYPE - Static variable in class nxopen.uf.UFWeld.Types

SLOT_VECTOR - Static variable in class nxopen.uf.UFConstants

SLOT_VER - Static variable in class nxopen.tooling.DieCavityAndSlugHoleBuilder.BottomPlateSlugItems

Bottom plate slug type is slot vertical

SLOT_VER - Static variable in class nxopen.tooling.DieCavityAndSlugHoleBuilder.DieShoeSlugTypeItems

Die shoe slug type is slot vertical

SLOT_VER - Static variable in class nxopen.tooling.PiercingInsertBuilder.NormalBbpslugType

Bottom plate slug type is slot vertical

SLOT_VER - Static variable in class nxopen.tooling.PiercingInsertBuilder.NormalDsslugType

Die shoe slug type is slot vertical

SLOT_VER - Static variable in class nxopen.tooling.SpecialPiercingInsertBuilder.NormalBottomBackingPlateSlugType

Bottom backing plate slug type is slot vertical

SLOT_VER - Static variable in class nxopen.tooling.SpecialPiercingInsertBuilder.NormalDieShoeSlugType

Die shoe slug type is slot vertical

SLOT_WELD - Static variable in class nxopen.uf.UFConstants

SLOT_WELD_NON_ASSOCIATIVE - Static variable in class nxopen.uf.UFConstants

slotAttributes() - Method in interface nxopen.die.KeywayBuilder

Returns the slot attributes
License requirements: None.

SlotAttributesData() - Constructor for class nxopen.die.KeywayChildBuilder.SlotAttributesData

SlotAttributesData() - Constructor for class nxopen.die.KeywayParentBuilder.SlotAttributesData

slotDepth() - Method in interface nxopen.die.KeywayBuilder

Returns the expression for the slot depth
License requirements: None.

slotEndFacesAttributes() - Method in interface nxopen.die.ClampingSlotBuilder

Returns the attributes for the end faces of the slot
License requirements: None.

slotFace - Variable in class nxopen.uf.UFModl.SmslotData

slotFacesAttributes() - Method in interface nxopen.die.ClampingSlotBuilder

Returns the attributes for the slot faces
License requirements: None.

slotLength() - Method in interface nxopen.die.ClampingSlotBuilder

Returns the length of the slot
License requirements: None.

slotLength() - Method in interface nxopen.die.KeywayBuilder

Returns the expression for the slot length
License requirements: None.

slotRadius() - Method in interface nxopen.die.ClampingSlotBuilder

Returns the radius of the back cutout
License requirements: None.

slotWidth() - Method in interface nxopen.die.ClampingSlotBuilder

Returns the width of the slot
License requirements: None.

slotWidth() - Method in interface nxopen.die.KeywayBuilder

Returns the expression for the slot width
License requirements: None.

SLOW - Static variable in class nxopen.cae.optimization.TBSTopologyControllerOptimizationParameters.Speed

Small stepsize

SLOW - Static variable in class nxopen.MovieSettingsBuilder.PlaybackSpeedChoices

Specifies slow playback speed (half of record speed)

SLOW - Static variable in class nxopen.optimization.OptimizationBuilder.OptimizationConvergenceSpeedType

Slow convergence speed

slowdownDistanceOption() - Method in interface nxopen.cam.CornerControlBuilder

Returns the slowdown distance option
License requirements: None.

slowdownPercent() - Method in interface nxopen.cam.CornerControlBuilder

Returns the slowdown percentage.

slugHoleDiameterIncrement() - Method in interface nxopen.die.PierceHoleChildBuilder

Returns the slug hole diameter increment of the pierce hole
License requirements: ug_die_design ("Die Design")
.

slugHoleDiameterIncrement() - Method in interface nxopen.die.PierceHoleParentBuilder

Returns the slug hole diameter increment of pierce holes
License requirements: ug_die_design ("Die Design")
.

slugHoleHeightLinearDimension() - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder

Returns the slug hole height linear dimension
License requirements: None.

slugHoleHeightLinearDimension() - Method in interface nxopen.tooling.PiercingInsertBuilder

Returns the slug hole height linear dimension
License requirements: None.

slugHoleHeightLinearDimension() - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder

Returns the slug hole height linear dimension
License requirements: None.

slugHoleOffset() - Method in interface nxopen.die.PierceHoleChildBuilder

Returns the slug hole offset of the pierce hole
License requirements: ug_die_design ("Die Design")
.

slugHoleOffset() - Method in interface nxopen.die.PierceHoleParentBuilder

Returns the slug hole offset of pierce holes
License requirements: ug_die_design ("Die Design")
.

slugholeProfile() - Method in interface nxopen.tooling.ShimBuilder

Returns the list containing the inner profiles which need to offset.

slugHoleProfile() - Method in interface nxopen.tooling.ShimInnerProfileSetBuilder

Returns the slug hole profile
License requirements: None.

slugHoleProfileOffset() - Method in interface nxopen.tooling.ShimInnerProfileSetBuilder

Returns the slug hole profile offset
License requirements: None.

slugPreviousParameterA() - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder

Returns the previous slug parameter A
License requirements: None.

slugPreviousParameterC1() - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder

Returns the previous slug parameter C1
License requirements: None.

slugPreviousParameterC2() - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder

Returns the previous slug parameter C2
License requirements: None.

slugRetentionBooleanData() - Method in interface nxopen.tooling.SlugRetentionBuilder

Returns the slug retention boolean data
License requirements: None.

SlugRetentionBuilder - Interface in nxopen.tooling

Represents a SlugRetentionBuilder which is used to create the Slug Retention.

slugRetentionFeature() - Method in interface nxopen.tooling.SlugRetentionBuilder

Returns the slug retention feature
License requirements: None.

SMALL - Static variable in class nxopen.display.SelPref.SelectionRadius

selection ball size small

SMALL - Static variable in class nxopen.display.TransientText.TextSize

SMALL - Static variable in class nxopen.markup.Icon.Size

Small size

SMALL - Static variable in class nxopen.preferences.SubdivisionModelingPreferences.CagePolylineVertexSizes

SMALL - Static variable in class nxopen.preferences.SubdivisionModelingPreferences.VertexSizeTypes

SMALL - Static variable in class nxopen.preferences.VisualizationHandles.HandleSizeValue

Small Handle Size

SMALL - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.TextSize

SMALL_NUMBER_ITEMS - Static variable in class nxopen.cae.responsesimulation.RmsLcrEvaluationMethod

Small number of evaluation items

SMALL_THAN - Static variable in class nxopen.cae.modelcheck.TestValueTypes.Validator

the check passes if the check result is small than the criteria value

SMALL_THAN_OR_EQUAL - Static variable in class nxopen.cae.modelcheck.TestValueTypes.Validator

the check passes if the check result is equal or small than the criteria value

SMALL_WHEEL - Static variable in class nxopen.uf.UFDisp.PolyMarker

SMALL_WHEEL - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker

smallAngle - Variable in class nxopen.uf.UFModeling.AskVectorAngleData

smallAreaAvoidance() - Method in interface nxopen.cam.MillCutParameters

Returns the small area avoidance
License requirements: None.

SmallAreaAvoidance - Interface in nxopen.cam

Represents a SmallArea Builder .

SmallAreaAvoidance.StatusTypes - Class in nxopen.cam

available types for Small Area Status

smallAreaStatus() - Method in interface nxopen.cam.SmallAreaAvoidance

Returns the small area status
License requirements: None.

SMALLEST_FACET - Static variable in class nxopen.facet.DecimateFacetBodyBuilder.DecimateMethodType

Smallest facet removes all facets smaller than the defined area, thus removing facets deemed to be redundant by the designer.

smallFeature() - Method in interface nxopen.drawings.HiddenLinesViewStyle

Returns the small feature option.

smallFeature() - Method in interface nxopen.drawings.ViewStyleHiddenLinesBuilder

Returns the small feature option on the HIDDEN LINES tab of the View Style Dialog
License requirements: None.

smallFeature() - Method in interface nxopen.preferences.HiddenLinesViewPreferences

Returns the small feature option.

smallFeature - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms

smallFeature - Variable in class nxopen.uf.UFSf.UgsMeshAbstractionParams

smallFeature - Variable in class nxopen.uf.UFSf.UgsTetMeshParms

smallFeatures() - Method in interface nxopen.drawings.CustomViewSettingsBuilder

Returns the small features
License requirements: None.

smallFeaturesTolerance() - Method in interface nxopen.drawings.HiddenLinesViewStyle

Returns the value of small features tolerance.

smallFeaturesTolerance() - Method in interface nxopen.drawings.ViewStyleHiddenLinesBuilder

Returns the small features tolerance on the HIDDEN LINES tab of the View Style Dialog
License requirements: None.

smallFeaturesTolerance() - Method in interface nxopen.preferences.HiddenLinesViewPreferences

Returns the value of small features tolerance.

smallFeatureTolerance - Variable in class nxopen.uf.UFDraw.ViewPrfs

SMART_DISTANCE - Static variable in class nxopen.MeasureDistanceBuilder.DistanceType

SMART_LIGHTWEIGHT - Static variable in class nxopen.drawings.ViewCreationWizardBuilder.ViewRepresentations

View representation mode Lightweight

SMART_LIGHTWEIGHT - Static variable in class nxopen.preferences.GeneralViewRepresentationOption

Smart Lightweight

SMART_OBJECT - Static variable in class nxopen.features.CopyPasteBuilder.ParentSelectOption

Selecting input for the original parent.

SMART_POINT - Static variable in class nxopen.uf.UFDrf.AssocType

SMART_PROJECTED_DISTANCE - Static variable in class nxopen.MeasureDistanceBuilder.DistanceType

smartCollector() - Method in interface nxopen.features.ChamferBuilder

Returns the smart collector
License requirements: None.

smartCsys - Variable in class nxopen.uf.UFModl.RoughOffset

smartlightweightViewsLoadComponentOnDemand() - Method in interface nxopen.preferences.SessionDrafting

Returns the load on demand flag
License requirements: None.

smartLod() - Method in interface nxopen.JtCreator

Returns the smartLOD * - Specifies wheather smart LOD generation is ON or OFF
License requirements: None.

SmartObject - Interface in nxopen

Represents a smart object.

SmartObject.UpdateOption - Class in nxopen

Specifies when the smart object updates.

SmartObject.VisibilityOption - Class in nxopen

Specifies the smart object visibility.

smartPoints - Variable in class nxopen.features.EdgeBlendBuilder.VariableRadiusData

Array of smart points defining variable radius

smartPoints - Variable in class nxopen.features.EdgeBlendBuilder.VariableRadiusDataNewData

Array of smart points defining variable radius

SmartRule - Interface in nxopen.features.shipdesign

Represents a smart rule feature.

SmartRuleBuilder - Interface in nxopen.features.shipdesign

Represents a SmartRule builder
To create a new instance of this class, use ShipCollection.createSmartRuleBuilder(nxopen.features.shipdesign.SmartRule)

Created in NX8.0.0

SmartSaveBuilder - Interface in nxopen.pdm

TODO: Add a documentation comment describing this class.

SmartSaveBuilder.SaveType - Class in nxopen.pdm

Represents an File Save type .

SmartSaveObject - Interface in nxopen.pdm

Represents the class for object participating in the smart save operation.

SmartScrewUpdateBuilder - Interface in nxopen.tooling

Smart Screw Update of MW, PDW and EDW.

SmartScrewUpdateBuilder.ParentOption - Class in nxopen.tooling

Specify the parent node.

SmartScrewUpdateBuilder.Types - Class in nxopen.tooling

Specify the operation type.

SmartSelectionManager - Interface in nxopen.cae

Provides methods for creating smart selection methods in a cae part
To obtain an instance of this class, refer to CaePart

Created in NX6.0.0

smartSelectionMgr() - Method in interface nxopen.cae.CaePart

Returns the smart selection manager belonging to this part .

smartUpdateOptionAsString() - Method in interface nxopen.blockstyler.SectionBuilder

Returns the update option for points created by the point overlay.

smartUpdateOptionAsString() - Method in interface nxopen.blockstyler.SelectObject

Returns the update option for points created by the point overlay.

smartUpdateOptionAsString() - Method in interface nxopen.blockstyler.SpecifyCSYS

Returns the SmartUpdateOption as string
License requirements: None.

smartUpdateOptionAsString() - Method in interface nxopen.blockstyler.SuperSection

Returns the update option for points created by the point overlay.

smartUpdteOptionAsString() - Method in interface nxopen.blockstyler.SpecifyCSYS

Deprecated.

Deprecated in NX9.0.1. Use BlockStyler.SpecifyCSYS#smartUpdateOptionAsString instead

smartVectors - Variable in class nxopen.uf.UFFbmGeom.AskAccessibilityVectorsData

smartVolumeProfile() - Method in interface nxopen.features.ExtrudeBuilder

Returns the smart volume profile
License requirements: None.

smartVolumeProfile() - Method in interface nxopen.features.RevolveBuilder

Returns the smart volume profile
License requirements: None.

SmartVolumeProfileBuilder - Interface in nxopen.geometricutilities

This class contains the options for automatically closing the profile to surrounding model geometry.

SmartVolumeProfileBuilder.CloseProfileRuleType - Class in nxopen.geometricutilities

the type of profile closures to be performed

SmashComponentBuilder - Interface in nxopen.layout2d

Represents a Builder for Smash 2D Component functionality which will break instances of 2D Components into its constituent pieces, we can have multiple committed objects
To create a new instance of this class, use ComponentCollection.createSmashComponentBuilder()

Created in NX10.0.0

SmashCustomSymbolBuilder - Interface in nxopen.annotations

Represents a SmashCustomSymbolBuilder .

SmashDrawingViewBuilder - Interface in nxopen.drafting

This builder allows the user to break a Drawing View into its parts and delete the Drawing View
To create a new instance of this class, use DraftingApplicationManager.createSmashDrawingViewBuilder()

Created in NX8.5.0

smashSymbol() - Method in interface nxopen.annotations.BaseCustomSymbolBuilder

Returns the smash symbol
License requirements: None.

SMAW - Static variable in class nxopen.weld.PlugSlotBuilder.ArcProcessEnum

SMBEND_BEND_ANGLE - Static variable in class nxopen.uf.UFModl.SmbendAngle

SMBEND_BEND_AXIS - Static variable in class nxopen.uf.UFModl.SmbendCurve

SMBEND_BEND_CENTERLINE - Static variable in class nxopen.uf.UFModl.SmbendCurve

SMBEND_BEND_DIR_AS_SPECIFIED - Static variable in class nxopen.uf.UFModl.SmbendDirection

SMBEND_BEND_DIR_OPPPOSITE_SIDE - Static variable in class nxopen.uf.UFModl.SmbendDirection

SMBEND_BEND_TANGENT_LINE - Static variable in class nxopen.uf.UFModl.SmbendCurve

SMBEND_CONTOUR_LINE - Static variable in class nxopen.uf.UFModl.SmbendCurve

SMBEND_INCLUDED_ANGLE - Static variable in class nxopen.uf.UFModl.SmbendAngle

SMBEND_INNER_RADIUS - Static variable in class nxopen.uf.UFModl.SmbendRadius

SMBEND_INVALID_ANGLE_TYPE - Static variable in class nxopen.uf.UFModl.SmbendAngle

SMBEND_INVALID_BEND_DIR - Static variable in class nxopen.uf.UFModl.SmbendDirection

SMBEND_INVALID_CURVE_TYPE - Static variable in class nxopen.uf.UFModl.SmbendCurve

SMBEND_INVALID_RADIUS_TYPE - Static variable in class nxopen.uf.UFModl.SmbendRadius

SMBEND_INVALID_STAT_SIDE - Static variable in class nxopen.uf.UFModl.SmbendStatSide

SMBEND_MOLD_LINE - Static variable in class nxopen.uf.UFModl.SmbendCurve

SMBEND_NONE - Static variable in class nxopen.uf.UFModl.SmbendCurve

SMBEND_NUM_ANGLE_TYPES - Static variable in class nxopen.uf.UFModl.SmbendAngle

SMBEND_NUM_BEND_DIRS - Static variable in class nxopen.uf.UFModl.SmbendDirection

SMBEND_NUM_CURVE_TYPES - Static variable in class nxopen.uf.UFModl.SmbendCurve

SMBEND_NUM_RADIUS_TYPES - Static variable in class nxopen.uf.UFModl.SmbendRadius

SMBEND_NUM_STAT_SIDES - Static variable in class nxopen.uf.UFModl.SmbendStatSide

SMBEND_OUTER_RADIUS - Static variable in class nxopen.uf.UFModl.SmbendRadius

SMBEND_STAT_SIDE_AS_SPECIFIED - Static variable in class nxopen.uf.UFModl.SmbendStatSide

SMBEND_STAT_SIDE_OPPOSITE_SIDE - Static variable in class nxopen.uf.UFModl.SmbendStatSide

SmbendCornerData() - Constructor for class nxopen.uf.UFModl.SmbendCornerData

SmbendCornerData(Tag, String, UFModl.SmbendRadius, UFModl.SmbendStatSide, String) - Constructor for class nxopen.uf.UFModl.SmbendCornerData

SmbendCylinderData() - Constructor for class nxopen.uf.UFModl.SmbendCylinderData

SmbendCylinderData(Tag, UFModl.SmbendStatSide, String) - Constructor for class nxopen.uf.UFModl.SmbendCylinderData

SmbendData() - Constructor for class nxopen.uf.UFModl.SmbendData

SmbendData(Tag, Tag, UFModl.SmbendCurve, String, UFModl.SmbendAngle, String, UFModl.SmbendRadius, UFModl.SmbendDirection, UFModl.SmbendStatSide, String) - Constructor for class nxopen.uf.UFModl.SmbendData

SMBoundaryConditionBuilder - Interface in nxopen.features.sheetmetal

Represents a Boundary condition object for Metaform.

SMBoundaryConditionBuilder.ConstraintTypes - Class in nxopen.features.sheetmetal

Types of Boundary condition constraints

SMBoundaryConditionBuilderList - Interface in nxopen.features.sheetmetal

Represents a list of objects.

smboundaryConditions() - Method in interface nxopen.features.sheetmetal.MetaformBuilder

Returns the boundary conditions
License requirements: None.

SmcornerData() - Constructor for class nxopen.uf.UFModl.SmcornerData

SmcornerData(int, Tag, Tag, String, String, String, String, boolean, boolean, boolean, String, boolean) - Constructor for class nxopen.uf.UFModl.SmcornerData

SmcutoutData() - Constructor for class nxopen.uf.UFModl.SmcutoutData

SmcutoutData(Tag, int, Tag[], UFModl.SmholeDirectionType, double[], Tag, boolean, UFModl.SmcutoutType, Tag) - Constructor for class nxopen.uf.UFModl.SmcutoutData

smd() - Method in interface nxopen.UFSession

SmholeData() - Constructor for class nxopen.uf.UFModl.SmholeData

SmholeData(String, String, String, Tag, String, Tag, String, Tag, Tag, Tag, UFModl.SmholeDirectionType, double[], UFModl.SmholeType) - Constructor for class nxopen.uf.UFModl.SmholeData

SMITH_WATSON_TOPPER - Static variable in class nxopen.cae.DurabilityDamageEvaluationBuilder.FatigueLifeCriterionEnum

SMITH_WATSON_TOPPER - Static variable in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.FatigueLifeCriterionEnum

SWT

SMITH_WATSON_TOPPER - Static variable in class nxopen.uf.UFSf.DursolFatigueLifeCriterion

SmjoggleData() - Constructor for class nxopen.uf.UFModl.SmjoggleData

SmjoggleData(Tag, Tag, Tag, Tag, Tag, Tag, double[], double[], int, double[], double[], boolean, String, String, String, String, String, boolean, boolean, String, String) - Constructor for class nxopen.uf.UFModl.SmjoggleData

SMOKE_GRAY_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

SMOOTH - Static variable in class nxopen.cam.LaserProfileMove.InterpMethods

Smooth

SMOOTH - Static variable in class nxopen.cam.NcmEngRetBuilder.EngageRetractTypes

Smooth connections

SMOOTH - Static variable in class nxopen.cam.NcmPlanarBuilder.TransferWithinLevelsTypes

smooth

SMOOTH - Static variable in class nxopen.cam.NcmPlanarBuilder.TransferWithinLevelsWiths

smooth

SMOOTH - Static variable in class nxopen.cam.NcmPlanarEngRetBuilder.EngRetTypes

Smooth

SMOOTH - Static variable in class nxopen.cam.NcmScEngRetBuilder.EngRetTypes

Smooth connections

SMOOTH - Static variable in class nxopen.cam.NcmTransfer.TransferTypes

smooth

SMOOTH - Static variable in class nxopen.cam.NcmTransferBuilder.TraverseTypes

traverse smooth spline

SMOOTH - Static variable in class nxopen.cam.ToolAxisInterpolate.InterpolationMethodTypes

Smooth

SMOOTH - Static variable in class nxopen.cam.ToolPathSplitParametersBuilder.TransferTypes

smooth transfer type

SMOOTH - Static variable in class nxopen.features.SpineCurveBuilder.ArcSegmentsTypes

SMOOTH - Static variable in class nxopen.features.subdivision.SubdivisionBridgeFaceBuilder.ContinuityType

Smooth continuity

SMOOTH - Static variable in class nxopen.features.subdivision.SubdivisionConnectCageBuilder.ContinuityTypes

SMOOTH - Static variable in class nxopen.features.subdivision.SubdivisionExtrudeCageBuilder.ContinuityType

Smooth continuity

SMOOTH - Static variable in class nxopen.features.subdivision.SubdivisionFillBuilder.ContinuityType

Smooth continuity

SMOOTH - Static variable in class nxopen.features.subdivision.SubdivisionLoftBuilder.ContinuityType

Smooth continuity

SMOOTH - Static variable in class nxopen.features.subdivision.SubdivisionRevolveBuilder.ContinuityType

Smooth continuity

SMOOTH - Static variable in class nxopen.features.subdivision.SubdivisionSetContinuityBuilder.ContinuityTypes

SMOOTH - Static variable in class nxopen.features.subdivision.SubdivisionSweepBuilder.ContinuityType

Smooth continuity

smooth - Variable in class nxopen.uf.UFDraw.ViewPrfs

SMOOTH_CONTOURS - Static variable in class nxopen.cae.Post.Style

SMOOTH_EDGES_OFF - Static variable in class nxopen.uf.UFView.SmoothEdges

SMOOTH_EDGES_ON - Static variable in class nxopen.uf.UFView.SmoothEdges

SMOOTH_GRAY_SCALE - Static variable in class nxopen.geometricanalysis.ReflectionAnalysisBuilder.SceneImageType

Smooth gray scale.

SMOOTH_OFF - Static variable in class nxopen.uf.UFDraw.Smooth

SMOOTH_ON - Static variable in class nxopen.uf.UFDraw.Smooth

SMOOTH_ROAD - Static variable in class nxopen.motion.TirePropertyTnoBuilder.ContactMethodType

smoothArea() - Method in interface nxopen.cae.optimization.TBSSmoothBuilder

Returns the area to be smoothed
License requirements: None.

smoothBSurf() - Method in interface nxopen.IgesImporter

Returns the smooth bsurf - set the flag to true if b-surfaced are required to be smoothed
License requirements: None.

smoothBsurfaceData(int, int, double, double, UFModl.Bsurface) - Method in interface nxopen.uf.UFModlGeneral

Refer to UF_MODL_smooth_bsurface_data for documentation.

SmoothBsurfaceData() - Constructor for class nxopen.uf.UFModlGeneral.SmoothBsurfaceData

smoothBSurfaces() - Method in interface nxopen.Step203Importer

Returns the Smooth B-Surfaces - if set to true smooth B-Surfaces
License requirements: None.

smoothBSurfaces() - Method in interface nxopen.Step214Importer

Returns the Smooth B-Surfaces - if set to true smooth B-Surfaces
License requirements: None.

smoothBSurfaces() - Method in interface nxopen.Step242Importer

Returns the Smooth B-Surfaces - if set to true smooth B-Surfaces
License requirements: None.

smoothCornersAt() - Method in interface nxopen.cam.CornerControlBuilder

Returns the smooth corners at option.

smoothCurve() - Method in interface nxopen.die.AddendumSectionBuilder

Smooth the constraint curve using the radius supplied by AddendumSectionBuilder.smoothRadius() .

SmoothCurveString - Interface in nxopen.features

Represents a smooth section feature
To create or edit an instance of this class, use SmoothCurveStringBuilder

Created in NX9.0.0

SmoothCurveStringBuilder - Interface in nxopen.features

Represents a Features.SmoothCurveString builder
To create a new instance of this class, use FreeformCurveCollection.createSmoothCurveStringBuilder(nxopen.features.SmoothCurveString)
Default values.

SmoothCurveStringBuilder.LevelTypes - Class in nxopen.features

the smoothing levels.

SmoothCurveStringBuilder.MergeTypes - Class in nxopen.features

the options to merge curves after being made continuous.

SmoothCurveStringBuilder.Types - Class in nxopen.features

the type of input curves.

smoothCycles() - Method in interface nxopen.cae.optimization.TBSSmoothBuilder

Returns the number of smoothing cycles.

smoothEdge() - Method in interface nxopen.drawings.SmoothEdgesViewStyle

Returns the status of smooth edge.

smoothEdge() - Method in interface nxopen.drawings.ViewStyleSmoothEdgesBuilder

Returns the smooth edge toggle on the SMOOTH EDGES tab of the View Style Dialog
License requirements: None.

smoothEdge() - Method in interface nxopen.preferences.SmoothEdgesViewPreferences

Returns the status of smooth edge.

smoothEdgeAngleTolerance - Variable in class nxopen.preferences.ViewVisualizationVisual.DisplayAppearanceOptions

Angle tolerance (in degrees) attribute for visible smooth edges.

smoothEdgeAngleTolerance - Variable in class nxopen.uf.UFView.EdgeDisplayOptions

smoothEdgeAngleTolerance - Variable in class nxopen.uf.UFView.Visualization

smoothEdgeColor() - Method in interface nxopen.drawings.CustomViewSettingsBuilder

Returns the smooth edge color pick
License requirements: None.

smoothEdgeColor() - Method in interface nxopen.drawings.SmoothEdgesViewStyle

Returns the color of smooth edge.

smoothEdgeColor() - Method in interface nxopen.preferences.SmoothEdgesViewPreferences

Returns the color of smooth edge.

smoothEdgeColor - Variable in class nxopen.preferences.ViewVisualizationVisual.DisplayAppearanceOptions

Color attribute for visible smooth edges

smoothEdgeColor - Variable in class nxopen.preferences.ViewVisualizationVisual.SurfaceDisplayOptions

Deprecated.

Color attribute for visible smooth edges

smoothEdgeColor - Variable in class nxopen.uf.UFDraw.ViewPrfs

smoothEdgeColor - Variable in class nxopen.uf.UFView.EdgeDisplayOptions

smoothEdgeColor - Variable in class nxopen.uf.UFView.Visualization

smoothEdgeEndGaps() - Method in interface nxopen.drawings.SmoothEdgesViewStyle

Returns the status of smooth edge end gaps.

smoothEdgeEndGaps() - Method in interface nxopen.preferences.SmoothEdgesViewPreferences

Returns the status of smooth edge end gaps.

smoothEdgeEndGapsData() - Method in interface nxopen.drawings.SmoothEdgesViewStyle

Returns the value of smooth edge end gaps.

smoothEdgeEndGapsData() - Method in interface nxopen.preferences.SmoothEdgesViewPreferences

Returns the value of smooth edge end gaps.

smoothEdgeFont() - Method in interface nxopen.drawings.CustomViewSettingsBuilder

Returns the smooth edge line font
License requirements: None.

smoothEdgeFont() - Method in interface nxopen.drawings.SmoothEdgesViewStyle

Returns the font of smooth edge.

smoothEdgeFont() - Method in interface nxopen.preferences.SmoothEdgesViewPreferences

Returns the font of smooth edge.

smoothEdgeFont - Variable in class nxopen.preferences.ViewVisualizationVisual.DisplayAppearanceOptions

Font attribute for visible smooth edges

smoothEdgeFont - Variable in class nxopen.preferences.ViewVisualizationVisual.SurfaceDisplayOptions

Deprecated.

Font attribute for visible smooth edges

smoothEdgeFont - Variable in class nxopen.uf.UFDraw.ViewPrfs

smoothEdgeFont - Variable in class nxopen.uf.UFView.EdgeDisplayOptions

smoothEdgeFont - Variable in class nxopen.uf.UFView.Visualization

smoothEdgeGap - Variable in class nxopen.uf.UFDraw.ViewPrfs

smoothEdgeGapSize - Variable in class nxopen.uf.UFDraw.ViewPrfs

smoothEdges() - Method in interface nxopen.drawings.ViewStyle

Returns object for doing View style settings applicable to SmoothEdges .

smoothEdges() - Method in interface nxopen.preferences.ViewPreferences

Returns object for doing View Preferences settings applicable to SmoothEdges .

smoothEdges - Variable in class nxopen.preferences.ViewVisualizationVisual.DisplayAppearanceOptions

Allows to control whether edges shared by tangent faces display or not.

smoothEdges - Variable in class nxopen.preferences.ViewVisualizationVisual.SurfaceDisplayOptions

Deprecated.

Allows to control whether edges shared by tangent faces display or not.

smoothEdges - Variable in class nxopen.preferences.ViewVisualizationVisual.TrueSurfaceDisplayPref

Deprecated.

Allows to control whether edges shared by tangent faces display or not.

smoothEdgesColor - Variable in class nxopen.preferences.ViewVisualizationVisual.TrueSurfaceDisplayPref

Deprecated.

Color attribute for visible smooth edges

smoothEdgesFont - Variable in class nxopen.preferences.ViewVisualizationVisual.TrueSurfaceDisplayPref

Deprecated.

Font attribute for visible smooth edges

smoothEdgesMode - Variable in class nxopen.uf.UFView.EdgeDisplayOptions

smoothEdgesMode - Variable in class nxopen.uf.UFView.Visualization

SmoothEdgesViewPreferences - Interface in nxopen.preferences

Represents set of Smooth Edges View Preferences applicable to drafting views.

SmoothEdgesViewStyle - Interface in nxopen.drawings

Represents set of Smooth Edges View Style Preferences applicable to drafting views.

smoothEdgesWidth - Variable in class nxopen.preferences.ViewVisualizationVisual.TrueSurfaceDisplayPref

Deprecated.

Width attribute for visible smooth edges

smoothEdgeTolerance() - Method in interface nxopen.drawings.SmoothEdgesViewStyle

Returns the status of smooth edge angle tolerance.

smoothEdgeTolerance() - Method in interface nxopen.preferences.SmoothEdgesViewPreferences

Returns the status of smooth edge angle tolerance.

smoothEdgeToleranceData() - Method in interface nxopen.drawings.SmoothEdgesViewStyle

Returns the value of smooth edge angle tolerance in degrees.

smoothEdgeToleranceData() - Method in interface nxopen.preferences.SmoothEdgesViewPreferences

Returns the value of smooth edge angle tolerance in degrees.

smoothEdgeWidth() - Method in interface nxopen.drawings.CustomViewSettingsBuilder

Returns the smooth edges line hidden font
License requirements: None.

smoothEdgeWidth() - Method in interface nxopen.drawings.SmoothEdgesViewStyle

Returns the width of smooth edge.

smoothEdgeWidth() - Method in interface nxopen.preferences.SmoothEdgesViewPreferences

Returns the width of smooth edge.

smoothEdgeWidth - Variable in class nxopen.preferences.ViewVisualizationVisual.DisplayAppearanceOptions

Width attribute for visible smooth edges

smoothEdgeWidth - Variable in class nxopen.preferences.ViewVisualizationVisual.SurfaceDisplayOptions

Deprecated.

Width attribute for visible smooth edges

smoothEdgeWidth - Variable in class nxopen.uf.UFDraw.ViewPrfs

smoothEdgeWidth - Variable in class nxopen.uf.UFView.EdgeDisplayOptions

smoothEdgeWidth - Variable in class nxopen.uf.UFView.Visualization

SmoothFacetBodyBuilder - Interface in nxopen.facet

Represents a SmoothFacetBodyBuilder .

smoothFactor() - Method in interface nxopen.facet.SmoothFacetBodyBuilder

Returns the smoothing factor
License requirements: None.

smoothFactor() - Method in interface nxopen.features.FitSurfaceBuilder

Returns the smooth factor influences the smoothness of the surface
License requirements: None.

smoothFactor() - Method in interface nxopen.features.RefitFaceBuilder

Returns the refit face smoothing factor
License requirements: None.

smoothHeight() - Method in interface nxopen.cam.NcmSmoothingBuilder

Returns the smooth height
License requirements: None.

smoothing() - Method in interface nxopen.cam.WedmGeomBuilder

Returns the smoothing
License requirements: cam_base ("CAM BASE")
.

smoothing() - Method in interface nxopen.cam.WedmOperationBuilder

Returns the smoothing
License requirements: cam_base ("CAM BASE")
.

smoothing() - Method in interface nxopen.die.TrimLineDevelopmentBuilder

Returns the curve smoothing method - linear (none), cubic or quintic
License requirements: None.

smoothingBuilder() - Method in interface nxopen.cam.NcmPlanarBuilder

Returns the smoothing builder
License requirements: None.

smoothingBuilder() - Method in interface nxopen.cam.NcmScBuilder

Returns the smoothing builder
License requirements: None.

smoothingFactor() - Method in interface nxopen.die.SpringbackCompensationBuilder

Returns the smoothing factor regulates a trade-off between interpolation error and smoothing when creating the result body.

smoothingFactor() - Method in interface nxopen.facet.CurvatureBuilder

Returns the smoothing factor
License requirements: None.

smoothingFactor() - Method in interface nxopen.facet.FeatureExtractionBuilder

Returns the smoothing factor
License requirements: None.

smoothingFactor() - Method in interface nxopen.features.PoleSmoothingBuilder

Returns the smoothing factor, the min and max values for this are (1 to 100)
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

smoothingFactor() - Method in interface nxopen.features.SmoothSplineBuilder

Returns the smoothing factor
License requirements: None.

smoothingLevel() - Method in interface nxopen.cae.FluidDomainBuilder

Returns the smoothing level parameter controls the amount of time spent smoothing and snapping in the wrapper engine
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")
.

smoothingOption() - Method in interface nxopen.cam.CornerControlBuilder

Returns the corner smoothing option
License requirements: None.

smoothingOption() - Method in interface nxopen.cam.NcmScBuilder

Deprecated.

Deprecated in NX9.0.0. Use NcmScBuilder.smoothingBuilder() instead.

smoothingOption() - Method in interface nxopen.features.MeshTransformerBuilder

Returns the smoothing option used in the transformation or morphing calculations
License requirements: None.

smoothingRadius() - Method in interface nxopen.cam.NcmSmoothingBuilder

Returns the smoothing radius settings
License requirements: None.

smoothingRadius() - Method in interface nxopen.cam.SurfaceContourBuilder

Returns the smoothing radius
License requirements: None.

smoothingRadiusBuilder() - Method in interface nxopen.cam.NcmScBuilder

Deprecated.

Deprecated in NX9.0.0. Use NcmScBuilder.smoothingBuilder() instead.

smoothings() - Method in interface nxopen.cae.optimization.TBSOptimizationSolution

Represents the smooth collection belonging to this optimization solution .

smoothingTolerance() - Method in interface nxopen.cam.IpwContainmentCurvesBuilder

Returns the smoothing tolerance
License requirements: None.

smoothLeadinDistance() - Method in interface nxopen.cam.WedmBasedGeomBuilder

Returns the Smooth Leadin Distance
License requirements: cam_base ("CAM BASE")
.

smoothLeadInDistanceBuilder() - Method in interface nxopen.cam.WedmOperationBuilder

Returns the smooth_lead_in_distance builder
License requirements: cam_base ("CAM BASE")
.

smoothLeadinFlag() - Method in interface nxopen.cam.WedmBasedGeomBuilder

Returns the Smooth Leadin Flag
License requirements: cam_base ("CAM BASE")
.

smoothLeadInOption() - Method in interface nxopen.cam.WedmGeomBuilder

Returns the Smooth Leadin Flag
License requirements: cam_base ("CAM BASE")
.

smoothLeadInOption() - Method in interface nxopen.cam.WedmOperationBuilder

Returns the Smooth Leadin Flag
License requirements: cam_base ("CAM BASE")
.

smoothLeadoutDistance() - Method in interface nxopen.cam.WedmBasedGeomBuilder

Returns the Smooth Leadout Distance
License requirements: cam_base ("CAM BASE")
.

smoothLeadOutDistanceBuilder() - Method in interface nxopen.cam.WedmGeomBuilder

Returns the smooth_lead_out_distance builder
License requirements: cam_base ("CAM BASE")
.

smoothLeadOutDistanceBuilder() - Method in interface nxopen.cam.WedmOperationBuilder

Returns the smooth_lead_out_distance builder
License requirements: cam_base ("CAM BASE")
.

smoothLeadoutFlag() - Method in interface nxopen.cam.WedmBasedGeomBuilder

Returns the Smooth Leadout Flag
License requirements: cam_base ("CAM BASE")
.

smoothLeadOutOption() - Method in interface nxopen.cam.WedmGeomBuilder

Returns the Smooth Leadout Flag
License requirements: cam_base ("CAM BASE")
.

smoothLeadOutOption() - Method in interface nxopen.cam.WedmOperationBuilder

Returns the Smooth Leadout Flag
License requirements: cam_base ("CAM BASE")
.

smoothLength() - Method in interface nxopen.cam.NcmSmoothingBuilder

Returns the smooth length
License requirements: None.

smoothness() - Method in interface nxopen.facet.BridgeFacetBodyBuilder

Returns the inserted facet smooth type
License requirements: None.

smoothness() - Method in interface nxopen.features.RapidSurfaceBuilder

Returns the smoothness
License requirements: studio_free_form ("STUDIO FREE FORM")
.

smoothnessRealData - Variable in class nxopen.uf.UFModl.RefitFaceData

smoothNormals() - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder

Returns the option to smooth the shell normals used for extrusion
License requirements: None.

smoothOverflow - Variable in class nxopen.uf.UFModl.EdgeBlendData

smoothOverflow - Variable in class nxopen.uf.UFModl.EdgeBlendMultData

smoothRadius() - Method in interface nxopen.die.AddendumSectionBuilder

Returns the smoothing radius for the constraint curve used by AddendumSectionBuilder.smoothCurve() .

smoothRange() - Method in interface nxopen.features.FlowBlendBuilder

Returns the smooth range object
License requirements: None.

SmoothRangeBuilder - Interface in nxopen.features

Represents a SmoothRangeBuilder builder
To create a new instance of this class, use FlowBlendBuilder.newSmoothRange()

Created in NX10.0.0

SmoothRangeBuilderList - Interface in nxopen.features

Represents a list of objects.

smoothRangeFrom() - Method in interface nxopen.features.SmoothRangeBuilder

Returns the start point of smoothing range
License requirements: None.

smoothRangeTo() - Method in interface nxopen.features.SmoothRangeBuilder

Returns the end point of smoothing range
License requirements: None.

smoothRatio() - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder

Returns the neighbor normal weigth ratio for normal smoothing
License requirements: None.

SmoothSpline - Interface in nxopen.features

Represents a smooth spline feature
To create or edit an instance of this class, use SmoothSplineBuilder

Created in NX6.0.0

SmoothSplineBuilder - Interface in nxopen.features

Represents a SmoothSpline builder
To create a new instance of this class, use FeatureCollection.createSmoothSplineBuilder(nxopen.features.SmoothSpline)
Default values.

SmoothSplineBuilder.Types - Class in nxopen.features

This enum represents the Smoothing Type option

smoothSplineData(UFCurve.Spline, int, double, double) - Method in interface nxopen.uf.UFCurve

Refer to UF_CURVE_smooth_spline_data for documentation.

SmoothSplineData() - Constructor for class nxopen.uf.UFCurve.SmoothSplineData

smoothSplineDataSt(UFCurve.Spline, int, double[], double) - Method in interface nxopen.uf.UFCurve

Refer to UF_CURVE_smooth_spline_data_st for documentation.

SmoothSplineDataStData() - Constructor for class nxopen.uf.UFCurve.SmoothSplineDataStData

smoothSw - Variable in class nxopen.uf.UFSfLegend.IndexColorAttr

smoothTolerance() - Method in interface nxopen.die.OutputCurvesBuilder

Returns the tolerance used for cubic or quintic smoothing.

smoothType() - Method in interface nxopen.die.OutputCurvesBuilder

Returns the smooth type
License requirements: die_engineering ("DIE ENGINEERING")
.

smoothType() - Method in interface nxopen.facet.FillHoleBuilder

Returns the boundary smoothness.

SmpunchCutSets() - Constructor for class nxopen.uf.UFModl.SmpunchCutSets

SmpunchCutSets(int, Tag[]) - Constructor for class nxopen.uf.UFModl.SmpunchCutSets

SmpunchData() - Constructor for class nxopen.uf.UFModl.SmpunchData

SmpunchData(UFModl.PunchType, UFModl.SmpunchTopType, UFModl.SmholeDirectionType, Tag, Tag, int, Tag[], int, UFModl.SmpunchCutSets[], Tag, String, String, String, String, String, double[], boolean, boolean, boolean) - Constructor for class nxopen.uf.UFModl.SmpunchData

SmreliefData() - Constructor for class nxopen.uf.UFModl.SmreliefData

SmreliefData(Tag, Tag[], Tag[], double[], String, String, String, String) - Constructor for class nxopen.uf.UFModl.SmreliefData

SmslotData() - Constructor for class nxopen.uf.UFModl.SmslotData

SmslotData(String, String, String, Tag, String, Tag, String, Tag, Tag, UFModl.SmholeDirectionType, Tag, double[], UFModl.SmholeDirectionType, Tag, double[], UFModl.SmslotType) - Constructor for class nxopen.uf.UFModl.SmslotData

SNAP_ANGLE - Static variable in class nxopen.uf.UFConstants

SNAP_TO_CLOSEST_NODE - Static variable in class nxopen.cae.QueryCurveUsageOptions.ResultantCurveLocatorType

snapAngle() - Method in interface nxopen.mechanicalrouting.CreatePathBuilder

Returns the angle tolerance to snap to a location that allows a valid placement of an elbow.

snapAngle() - Method in interface nxopen.preferences.SessionSketch

Returns the snap angle.

snapAngle - Variable in class nxopen.uf.UFSket.AskLegacyPreferencesData

snapAngle - Variable in class nxopen.uf.UFSket.AskPreferencesData

snapAngleLimit() - Method in interface nxopen.tooling.MWDesignGuideLinesBuilder

Returns the snap angle limit for snapping the guide line direction to one of the WCS axis.

snapEnds() - Method in interface nxopen.cae.EdgeSticherBuilder

Returns the snap ends value to snap to vertex at the end of edge
License requirements: None.

snapFloorToggle() - Method in interface nxopen.display.TrueShadingBuilder

Returns the toggle forces the shadow plane to snap to the nearest object vertex
License requirements: None.

snapLinks() - Method in interface nxopen.motion.JointDefine

Returns the option of snap links
License requirements: mechanisms ("MECHANISMS")
.

snapLinks - Variable in class nxopen.uf.UFMotion.Joint

SNAPPING_DIAMOND - Static variable in class nxopen.uf.UFDisp.PolyMarker

SNAPPING_DIAMOND - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker

snapPointsPerMinor() - Method in interface nxopen.display.GridBuilder

Returns the snap points per minor
License requirements: None.

snapPointsPerMinor - Variable in class nxopen.preferences.WorkPlane.GridSize

Number of snap points between minor grid lines

snapPointToGrid() - Method in interface nxopen.weld.DatumSurfaceBuilder

Returns the snap point to grid option.

snapPointTypesEnabled() - Method in interface nxopen.blockstyler.SectionBuilder

Returns the SnapPointTypesEnabled
License requirements: None.

snapPointTypesEnabled() - Method in interface nxopen.blockstyler.SelectObject

Returns the SnapPointTypesEnabled
License requirements: None.

snapPointTypesEnabled() - Method in interface nxopen.blockstyler.SpecifyPoint

Returns the SnapPointTypesEnabled
License requirements: None.

snapPointTypesEnabled() - Method in interface nxopen.blockstyler.SuperPoint

Returns the SnapPointTypesEnabled
License requirements: None.

snapPointTypesEnabled() - Method in interface nxopen.blockstyler.SuperSection

Returns the SnapPointTypesEnabled
License requirements: None.

snapPointTypesOnByDefault() - Method in interface nxopen.blockstyler.AngularDimension

Deprecated.

Deprecated in NX9.0.0. This call can be safely removed as this is now a no-op.

snapPointTypesOnByDefault() - Method in interface nxopen.blockstyler.LinearDimension

Deprecated.

Deprecated in NX9.0.0. This call can be safely removed as this is now a no-op.

snapPointTypesOnByDefault() - Method in interface nxopen.blockstyler.OnPathDimension

Deprecated.

Deprecated in NX9.0.0. This call can be safely removed as this is now a no-op.

snapPointTypesOnByDefault() - Method in interface nxopen.blockstyler.RadiusDimension

Deprecated.

Deprecated in NX9.0.0. This call can be safely removed as this is now a no-op.

snapPointTypesOnByDefault() - Method in interface nxopen.blockstyler.SectionBuilder

Returns the SnapPointTypesOnByDefault
License requirements: None.

snapPointTypesOnByDefault() - Method in interface nxopen.blockstyler.SelectObject

Returns the SnapPointTypesOnByDefault
License requirements: None.

snapPointTypesOnByDefault() - Method in interface nxopen.blockstyler.SpecifyOrientation

Returns the SnapPointTypesOnByDefault
License requirements: None.

snapPointTypesOnByDefault() - Method in interface nxopen.blockstyler.SpecifyPoint

Returns the SnapPointTypesOnByDefault
License requirements: None.

snapPointTypesOnByDefault() - Method in interface nxopen.blockstyler.SpecifyVector

Returns the SnapPointTypesOnByDefault
License requirements: None.

snapPointTypesOnByDefault() - Method in interface nxopen.blockstyler.SuperPoint

Returns the SnapPointTypesOnByDefault
License requirements: None.

snapPointTypesOnByDefault() - Method in interface nxopen.blockstyler.SuperSection

Returns the SnapPointTypesOnByDefault
License requirements: None.

snapRadius() - Method in interface nxopen.SketchDimensionBuilder

Returns the snap radius.

SNAPSHOT - Static variable in class nxopen.drawings.DrawingCompareSettingsBuilder.ComparisonBaseline

Deprecated.

SNAPSHOT - Static variable in class nxopen.drawings.TrackDrawingChangesGeneralBuilder.BaselineOfComparisonType

snapShot() - Method in interface nxopen.drawings.ViewCreationWizardBuilder

Returns the snapshot option
License requirements: None.

SNAPSHOT - Static variable in class nxopen.issue.IssueAttachment.Type

Snapshot type

SNAPSHOT_AFTER_FIX - Static variable in class nxopen.issue.IssueFolder.Type

Snapshot after fix type

SNAPSHOT_BEFORE_FIX - Static variable in class nxopen.issue.IssueFolder.Type

Snapshot before fix type

snapshotDataToUse() - Method in interface nxopen.drawings.TrackDrawingChangesGeneralBuilder

Returns the snapshot data to use
License requirements: None.

SnapshotSubsetBuilder - Interface in nxopen.issue

Used to create or edit issue snapshot subset.

SnapshotSubsetBuilder.ContextType - Class in nxopen.issue

The option specifying which kinds of issue snapshot subset should be created.

snapshotView() - Method in interface nxopen.drawings.GeneralViewStyle

Returns the snapshot toggle on the GENERAL tab of the View Style Dialog
License requirements: None.

snapshotView() - Method in interface nxopen.drawings.ViewStyleGeneralBuilder

Returns the snapshot toggle on the GENERAL tab of the View Style Dialog
License requirements: None.

snapshotView() - Method in interface nxopen.preferences.GeneralViewPreferences

Returns the snapshot toggle on the GENERAL tab of the View Style Dialog
License requirements: None.

SnapshotWorksetBuilder - Interface in nxopen.issue

Used to create or edit issue snapshot workset which is a container to hold all the corresponding parts to represent an issue.

snapSize() - Method in interface nxopen.tooling.BlankLayoutBuilder

Returns the option to set the increment of the scale bar.

SNAPTO_WCSAXIS - Static variable in class nxopen.tooling.MWDesignGuideLinesBuilder.DirectionType

Snap to WCS axis

snapToClosestCannedOrientation() - Method in interface nxopen.View

Changes the orientation of the given view to the orientation of the canned view whose orientation is the closest to that of the given view.

snapToCutFaceTolerance() - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder

Returns the tolerance to snap nodes to the cutting face borders.

snapToElbowAngles() - Method in interface nxopen.mechanicalrouting.CreatePathBuilder

Returns the setting to determine whether to force the new control point to automatically snap to a location that allows a valid placement of an elbow.

snapToElbowAngles() - Method in interface nxopen.routing.ElbowSnapSettings

Returns whether or not to snap control points to the nearest valid elbow angle.

snapToGrid() - Method in interface nxopen.display.GridBuilder

Returns the snap to grid
License requirements: None.

snapToGrid() - Method in interface nxopen.preferences.WorkPlane

Returns the snap to grid flag.

snapToGrid - Variable in class nxopen.uf.UFDisp.Grid

snaptolerance - Variable in class nxopen.cae.FemPart.MeshPreferencesData

Snap Tolerance

snapTolerance() - Method in interface nxopen.cae.ImprintBuilder

Returns the snap tolerance
License requirements: None.

snapToSourceBoundaries() - Method in interface nxopen.cae.FluidDomainBuilder

Returns the edge snapping to boundaries flag controls whether or not the generated surface wrap body should be projected on the input boundaries
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling")
.

snapToVariantCannedOrientation() - Method in interface nxopen.View

Similar to View.snapToClosestCannedOrientation() except it changes the orientation of the given view to the orientation of some canned view "variant" based on I-deas's 'snapview' logic whose orientation is the closest to one of the six orthographic and eight flavors of trimetric views.

snapType - Variable in class nxopen.annotations.SelectAnnotation.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.annotations.SelectDimension.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.assemblies.SelectComponent.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.cae.SelectCAEBody.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.cae.SelectCAEEdge.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.cae.SelectCAEFace.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.cae.SelectFENode.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.cam.SelectCAMFeature.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.drawings.SelectDraftingView.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.drawings.SelectDrawingRegion.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.drawings.SelectDrawingView.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.drawings.SelectSectionLine.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.facet.SelectFacetedBody.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.features.SelectFeature.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.features.SelectFlatPattern.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.features.SelectPartModule.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.layout2d.SelectComponent.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.mechatronics.SelectAdapterSignal.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.mechatronics.SelectCollisionSensor.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.mechatronics.SelectPhysicsConstraint.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.mechatronics.SelectPhysicsJoint.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.mechatronics.SelectRigidBody.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.mechatronics.SelectSystemObject.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.mechatronics.SelectTagFormObject.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.motion.SelectControlPort.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.motion.SelectJoint.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.motion.SelectLink.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.motion.SelectMarker.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.motion.SelectRoad.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.motion.SelectTirePropertyBasic.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.motion.SelectTirePropertyCd.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.motion.SelectTirePropertyFt.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.motion.SelectTirePropertyMotorcycle.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.motion.SelectTirePropertyNonInertial.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.motion.SelectTirePropertyTno.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.routing.SelectControlPoint.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.routing.SelectISegment.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.routing.SelectLineSegment.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.routing.SelectPort.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.routing.SelectRun.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.routing.SelectStock.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.SelectBody.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.SelectCartesianCoordinateSystem.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.SelectCoordinateSystem.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.SelectCurve.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.SelectDatumPlane.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.SelectDisplayableObject.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.SelectEdge.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.SelectFace.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.SelectGroup.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.SelectIBaseCurve.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.SelectICurve.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.SelectIParameterizedSurface.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.SelectIReferenceAxis.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.SelectISurface.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.SelectLine.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.SelectNXObject.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.SelectObject.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.SelectPart.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.SelectPoint.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.SelectSketch.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.SelectSmartObject.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.SelectSpline.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.SelectTaggedObject.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.SelectView.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.weld.SelectDatumPin.ValueWithSnapData

snap point type

snapType - Variable in class nxopen.weld.SelectDatumSurface.ValueWithSnapData

snap point type

SNIP_AT_PLANE - Static variable in class nxopen.facet.SnipFacetBodyBuilder.Types

Snip at plane

SNIP_AT_PLANE - Static variable in class nxopen.features.SnipSurfaceBuilder.Types

SNIP_CURVE - Static variable in class nxopen.features.SnipSurfaceBuilder.Types

SNIP_FACETS - Static variable in class nxopen.facet.SnipFacetBodyBuilder.BoundaryFacetTreatmentMethod

Snip scarred facets by the border

SNIP_REGION - Static variable in class nxopen.facet.SnipFacetBodyBuilder.Types

Snip by region

SNIP_SURFACE - Static variable in class nxopen.features.SnipSurfaceBuilder.Types

SNIP_WITH_CURVES - Static variable in class nxopen.facet.SnipFacetBodyBuilder.Types

Snip with curves

snipCvString - Variable in class nxopen.uf.UFModl.SnipsrfFeatureData

SNIPED - Static variable in class nxopen.features.shipdesign.EdgeReinforcementBuilder.EndCutTypes

SNIPED - Static variable in class nxopen.features.shipdesign.EndCutBuilder.ConnectionTypes

If this Connection Type is set, the offset parameter can be used.

SNIPED - Static variable in class nxopen.features.shipdesign.StiffenerSystemBuilder.EndCutTypes

SNIPED_SQUARE - Static variable in class nxopen.features.shipdesign.EdgeReinforcementBuilder.EndCutTypes

SNIPED_SQUARE - Static variable in class nxopen.features.shipdesign.StiffenerSystemBuilder.EndCutTypes

SnipFacetBodyBuilder - Interface in nxopen.facet

Represents a SnipFacetBody builder
To create a new instance of this class, use FacetedBodyCollection.createSnipFacetBodyBuilder()
Default values.

SnipFacetBodyBuilder.BoundaryFacetTreatmentMethod - Class in nxopen.facet

Boundary facet treatment type:

SnipFacetBodyBuilder.DirectionType - Class in nxopen.facet

Snipping direction when snipping type "by profiles"

SnipFacetBodyBuilder.Types - Class in nxopen.facet

Snip method

SnipIntoPatchesBuilder - Interface in nxopen.geometricutilities

Represents a SnipIntoPatchesBuilder builder.

snipOrDivide - Variable in class nxopen.uf.UFModl.SnipsrfFeatureData

snippingCurve() - Method in interface nxopen.features.SnipSurfaceBuilder

Returns the snipping curve
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

snippingObject() - Method in interface nxopen.features.SnipSurfaceBuilder

Returns the snipping object
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

snippingPlane() - Method in interface nxopen.features.SnipSurfaceBuilder

Returns the snipping plane
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

snippingPlane - Variable in class nxopen.uf.UFModl.SnipsrfFeatureData

SnipsrfFeatureData() - Constructor for class nxopen.uf.UFModl.SnipsrfFeatureData

SnipsrfFeatureData(Tag, UFModl.SnipsurfBoundaryType, UFModl.StringList, Tag, double[], int, double[], int, UFModl.SnipsurfRefitMethod, int, int, double[]) - Constructor for class nxopen.uf.UFModl.SnipsrfFeatureData

SNIPSURF_BOUNDARY_TYPE_CURVES - Static variable in class nxopen.uf.UFModl.SnipsurfBoundaryType

SNIPSURF_BOUNDARY_TYPE_PLANE - Static variable in class nxopen.uf.UFModl.SnipsurfBoundaryType

SNIPSURF_REFIT_METHOD_DEG_PATCH - Static variable in class nxopen.uf.UFModl.SnipsurfRefitMethod

SNIPSURF_REFIT_METHOD_DEG_TOL - Static variable in class nxopen.uf.UFModl.SnipsurfRefitMethod

SNIPSURF_REFIT_METHOD_NONE - Static variable in class nxopen.uf.UFModl.SnipsurfRefitMethod

SNIPSURF_REFIT_METHOD_PATCH_TOL - Static variable in class nxopen.uf.UFModl.SnipsurfRefitMethod

SnipSurface - Interface in nxopen.features

Represents a snip surface feature
To create or edit an instance of this class, use SnipSurfaceBuilder

Created in NX6.0.0

SnipSurfaceBuilder - Interface in nxopen.features

Represents a SnipSurface builder
To create a new instance of this class, use FeatureCollection.createSnipSurfaceBuilder(nxopen.features.SnipSurface)
Default values.

SnipSurfaceBuilder.Types - Class in nxopen.features

Snip method added in v 7.5.0

snipSurfaceIntoPatches(Face) - Method in interface nxopen.geometricutilities.SnipIntoPatchesBuilder

Snip the selected surface into patches
License requirements: None.

so() - Method in interface nxopen.UFSession

SoaQuery - Interface in nxopen.pdm

Represents search soa query to perform Teamcenter search .

SOCKET - Static variable in class nxopen.weld.WeldJointBuilder.WeldTypes

Socket joint for pipe welding.

SOCKET_FEATURE - Static variable in class nxopen.uf.UFGdt.FeatureType

socketColorFontWidth() - Method in interface nxopen.weld.WeldJointBuilder

Returns the color, font, and width of the socket joint curves.

soCsys - Variable in class nxopen.uf.UFModeling.AskScaleData

soCsys - Variable in class nxopen.uf.UFModlFeatures.AskLocalScaleData

SODERBERG - Static variable in class nxopen.cae.DurabilityDamageEvaluationBuilder.EquivalentStressMethodEnum

SODERBERG - Static variable in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.EquivalentStressMethodEnum

Soderberg

soDir - Variable in class nxopen.uf.UFModeling.AskScaleData

soDir - Variable in class nxopen.uf.UFModlFeatures.AskLocalScaleData

SOFT - Static variable in class nxopen.assemblies.ClearanceSet.InterferenceType

SOFT - Static variable in class nxopen.cam.Tool.Types

SOFT - Static variable in class nxopen.HumanPosturePredictionBuilder.CushionFirmnessType

Indicate soft cushion

SOFT - Static variable in class nxopen.preferences.SessionModeling.SurfaceExtensionOption

SOFT_EDGED - Static variable in class nxopen.display.ImageBasedLighting.ShadowsType

Soft-edged,approximated shadows will be generated using a shadow mapping algorithm.

SOFT_EDGED - Static variable in class nxopen.display.LightBuilder.ShadowType

Soft-edged,approximated shadows will be generated using a shadow mapping algorithm.

SoftBlend - Interface in nxopen.features

Represents a Soft Blend feature.

softenVertices - Variable in class nxopen.uf.UFModl.EdgeBlendMultData

softShadowsBiasOffset() - Method in interface nxopen.display.Shadows

Returns the Soft Shadows bias offset
License requirements: None.

softShadowsEdges() - Method in interface nxopen.display.Shadows

Returns the Soft Shadows edges (softness)
License requirements: None.

softShadowsEnabled() - Method in interface nxopen.display.Shadows

Returns the Soft Shadows
License requirements: None.

softShadowsGradientClamp() - Method in interface nxopen.display.Shadows

Returns the Soft Shadows gradient clamp
License requirements: None.

softShadowsQuality() - Method in interface nxopen.display.Shadows

Returns the Soft Shadows quality
License requirements: None.

softShadowsToggle() - Method in interface nxopen.display.TrueShadingBuilder

Returns the soft shadows toggle
License requirements: None.

SoftTool - Interface in nxopen.cam

Represents a SoftTool
This is an abstract class, and cannot be instantiated.

SOFTWARE - Static variable in class nxopen.preferences.PartVisualizationLine.LineFontDisplayType

softwareProperties() - Method in interface nxopen.layout2d.ExportComponentHierarchyBuilder

Returns the flag indicating whether to export software properties for components
License requirements: None.

SOIL - Static variable in class nxopen.motion.TirePropertyAdvancedParameters.SurfType

SOLAR_VIEW_FACTOR - Static variable in class nxopen.cae.Result.Quantity

SOLDERED_JOINT - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSymbolType

SOLDERED_JOINT - Static variable in class nxopen.annotations.Symbol

Specifies soldered joint weld symbol

SOLID - Static variable in class nxopen.annotations.EditSymbolDisplayBuilder.FontTypes

Solid type

SOLID - Static variable in class nxopen.assemblies.ProductOutlineBuilder.LineFont

Solid Line

SOLID - Static variable in class nxopen.bodydes.OnestepUnformBuilder.Object

solid

SOLID - Static variable in class nxopen.cae.DisplaySectionType

SOLID - Static variable in class nxopen.cae.ElementCreateBuilder.ElemDimType

solid, types currently supported through UI

SOLID - Static variable in class nxopen.cae.ElementReflectBuilder.ElemDimType

only solid

SOLID - Static variable in class nxopen.cae.ElementTranslateBuilder.ElemDimensionType

only solid elements can be selected

SOLID - Static variable in class nxopen.cae.MeshCollectorBuilder.ElementDimensionOption

3-d

SOLID - Static variable in class nxopen.cae.ModelDisplayBuilder.FreeEdgeFont

Solid font

SOLID - Static variable in class nxopen.cae.ModelDisplayBuilder.RotationAxisLineFont

Solid font

SOLID - Static variable in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeFont

Solid font

SOLID - Static variable in class nxopen.cae.Post.MarkRenderStyle

SOLID - Static variable in class nxopen.cae.ReassignElementsBuilder.ElementDimensionOption

3-d

SOLID - Static variable in class nxopen.cam.Tool.Types

Solid tool

SOLID - Static variable in class nxopen.die.ClearanceBuilder.ClearanceGeometryTypes

The input is solids.

SOLID - Static variable in class nxopen.display.GridBuilder.LineStyleType

SOLID - Static variable in class nxopen.DisplayableObject.ObjectFont

SOLID - Static variable in class nxopen.drawings.CustomViewSettingsBuilder.Font

Solid

SOLID - Static variable in class nxopen.drawings.DrawingCompareSettingsBuilder.FontType

Deprecated.

SOLID - Static variable in class nxopen.drawings.SectionLineStyleBuilder.FontStyle

Deprecated.

SOLID - Static variable in class nxopen.features.GlobalShapingBuilder.BodyMethod

Output solid

SOLID - Static variable in class nxopen.features.OvercrownBuilder.OutputType

SOLID - Static variable in class nxopen.features.SectionInertiaAnalysisBuilder.PropertyType

Solid analysis

SOLID - Static variable in class nxopen.features.SectionSurfaceBuilderEx.BodyType

solid type

SOLID - Static variable in class nxopen.features.SewBuilder.Types

Solid

SOLID - Static variable in class nxopen.features.shipdesign.PlateBoundaryOptionBuilder.BoundaryTypes

use Body as the boundary.

SOLID - Static variable in class nxopen.features.ThroughCurveMeshBuilder.BodyPreferenceTypes

Solid

SOLID - Static variable in class nxopen.features.ThroughCurvesBuilder.BodyPreferenceTypes

Solid

SOLID - Static variable in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Font

Solid Font

SOLID - Static variable in class nxopen.fields.DisplayPropertiesBuilder.LineFontEnum

Solid

SOLID - Static variable in class nxopen.geometricutilities.FeatureOptions.BodyStyle

Solid Body

SOLID - Static variable in class nxopen.HumanPosturePredictionBuilder.SteeringWheelPedalType

Use solid steering wheel or pedal

SOLID - Static variable in class nxopen.LineFontBuilder.LineFontType

Solid line font

SOLID - Static variable in class nxopen.motion.BodyContactRecurdyn.ContactType

SOLID - Static variable in class nxopen.preferences.Font

Solid

SOLID - Static variable in class nxopen.preferences.PartDrafting.FontType

Solid

SOLID - Static variable in class nxopen.preferences.PartModeling.GridKnotLineFontType

SOLID - Static variable in class nxopen.preferences.PartObject.LineFontType

Solid

SOLID - Static variable in class nxopen.preferences.SessionModeling.BodyTypeOption

Indicates Body Type is solid

SOLID - Static variable in class nxopen.preferences.SessionModeling.PolylineStyleType

SOLID - Static variable in class nxopen.preferences.ViewVisualizationVisual.SmoothEdgeFont

SOLID - Static variable in class nxopen.Print3dBuilder.PrintInfillEnum

SOLID - Static variable in class nxopen.tooling.PocketBuilder.ToolType

solid

SOLID - Static variable in class nxopen.uf.UFConstants

SOLID - Static variable in class nxopen.ViewDependentDisplayManager.Font

SOLID - Static variable in class nxopen.weld.WeldFeatureOutput

Output only solids

solid1 - Variable in class nxopen.uf.UFMotion.Interference

solid2 - Variable in class nxopen.uf.UFMotion.Interference

SOLID_ASSEMBLY - Static variable in class nxopen.cam.GougeCheckBuilder.ToolShapeType

use solid assembly

SOLID_BASED - Static variable in class nxopen.tooling.ValidCheckBuilder.AnalysisMode

Solid body will be used to do checking

SOLID_BODIES - Static variable in class nxopen.blockstyler.SelectObject.FilterType

Filter to select all solid bodies

SOLID_BODIES - Static variable in class nxopen.cam.Preferences.SelectionTypes

solid bodies

SOLID_BODIES - Static variable in class nxopen.DisplayManager.ShowHideType

Show or hide solid bodies

SOLID_BODY - Static variable in class nxopen.facet.FacetedBody.FacetedbodyType

SOLID_BODY - Static variable in class nxopen.features.shipdesign.PlateBuilder.BodyTypes

Outputs a plate as a solid body.

SOLID_BODY - Static variable in class nxopen.features.vehicledesign.TireEnvelopeBuilder.TireDefinitionOption

Use a solid body.

SOLID_BODY - Static variable in class nxopen.tooling.ObjectAttributeManagementBuilder.FilterAccordingToAttributeType

SOLID_BODY - Static variable in class nxopen.tooling.ObjectAttributeManagementBuilder.FilterType

SOLID_BODY_INTERSECTION - Static variable in class nxopen.tooling.RunSimulationBuilder.CollisionCheckOptions

Get the solid body, use intersection boolean result to do collision check

SOLID_CENTER - Static variable in class nxopen.cam.DisplayPath.PathDisplayTypes

Path Display: Solid Center

SOLID_CENTER - Static variable in class nxopen.cam.OperationDisplayOptionsBuilder.PathDisplayTypes

Path Display: Solid Center

SOLID_CONE - Static variable in class nxopen.weld.WeldCustom

creates a cone

SOLID_CYLINDER - Static variable in class nxopen.weld.WeldCustom

creates a cylinder

SOLID_DEFAULT - Static variable in class nxopen.weld.WeldCustom

creates a default solid

SOLID_ELEMENT - Static variable in class nxopen.cae.CaeSetGroupFilterType

filter type is 3D element

SOLID_FACE_COLORS - Static variable in class nxopen.cae.modelcheck.ReverseShellElementNormalBuilder.DisplayTypeValue

SOLID_FILL - Static variable in class nxopen.annotations.AreaFillMaterial

Solid fill

SOLID_FILL - Static variable in class nxopen.uf.UFDrf.AreaFillMaterial

SOLID_FIRST_DIRECTION - Static variable in class nxopen.cae.modelcheck.ElementMaterialOrientationCheckBuilder.MaterialOrientationType

the first direction of solid element material orientation

SOLID_INTER_LAMINAR_FAILURE_INDEX - Static variable in class nxopen.cae.Result.Quantity

SOLID_LAMINATE_FAILURE_INDEX - Static variable in class nxopen.cae.Result.Quantity

SOLID_LASER_HEAD - Static variable in class nxopen.cam.LaserProfileMove.CollisionChecks

Solid Laser Head

SOLID_NONE - Static variable in class nxopen.weld.WeldCustom

creates only a point

SOLID_OBJECT_NOT_ALIVE - Static variable in class nxopen.uf.UFConstants

SOLID_OWNING_PART - Static variable in class nxopen.tooling.SubInsertBuilder.Types

The parent part is the owning part of solid

SOLID_PATCH - Static variable in class nxopen.tooling.SolidPatchBuilder.SolidPatchType

Solid patch type indicates to create solid patch

SOLID_POLYGON_BODIES - Static variable in class nxopen.DisplayManager.ShowHideType

Show or hide solid polygon bodies

SOLID_REVOLVED_FEATURE - Static variable in class nxopen.uf.UFGdt.FeatureType

SOLID_ROD - Static variable in class nxopen.drawings.BrokenViewBuilder.BreakLineStyle

Solid Rod

SOLID_ROD - Static variable in class nxopen.drawings.ViewBreakBuilder.Viewbreaklinestyle

SOLID_ROD - Static variable in class nxopen.preferences.PartDrafting.BreakLineStyle

Solid Rod

SOLID_SECOND_DIRECTION - Static variable in class nxopen.cae.modelcheck.ElementMaterialOrientationCheckBuilder.MaterialOrientationType

the second direction of solid element material orientation

SOLID_SPHERE - Static variable in class nxopen.weld.WeldCustom

creates a sphere

SOLID_THIRD_DIRECTION - Static variable in class nxopen.cae.modelcheck.ElementMaterialOrientationCheckBuilder.MaterialOrientationType

the third direction of solid element material orientation

SOLID_TOPO - Static variable in class nxopen.uf.UFBrep.TopoType

SOLID_TORUS_FEATURE - Static variable in class nxopen.uf.UFGdt.FeatureType

SOLID_TUBULAR - Static variable in class nxopen.drawings.BrokenViewBuilder.BreakLineStyle

Solid Tubular

SOLID_TUBULAR - Static variable in class nxopen.drawings.ViewBreakBuilder.Viewbreaklinestyle

SOLID_TUBULAR - Static variable in class nxopen.preferences.PartDrafting.BreakLineStyle

Solid Tubular

solidBodies - Variable in class nxopen.cam.PreprocessGeometryBuilder.ObjectsData

the solid bodies

SOLIDBODY - Static variable in class nxopen.preferences.PartObject.ObjectType

Solid Body

solidBody - Variable in class nxopen.uf.UFSf.MidsrfUserParms

solidBodySel() - Method in interface nxopen.features.MidSurfaceUserDefinedBuilder

Returns the solid body for user defined midsurface
License requirements: None.

solidBodySubtype - Variable in class nxopen.Selection.MaskTriple

Solid body subtype.

solidCreation - Variable in class nxopen.uf.UFModl.AskExtrusionData

solidCreation - Variable in class nxopen.uf.UFModl.AskRevolutionData

SolidDensity - Interface in nxopen.geometricanalysis

Represents a SolidDensity
To create a new instance of this class, use AnalysisManager.createSolidDensityObject()

Created in NX5.0.0

SolidDensity.UnitsType - Class in nxopen.geometricanalysis

Types of units for solid density

SOLIDE - Static variable in class nxopen.Catiav4Creator.SolidBodyOutputOption

output NX solid bodies as SOLIDE in CATIA

solidEdgeType() - Method in interface nxopen.Edge

Returns the solid type of the edge
License requirements: solid_modeling ("SOLIDS MODELING")
.

SolidElementFaceNormalBuilder - Interface in nxopen.cae.modelcheck

Represents a SolidElementFaceNormalBuilder used to reorient normals for left handed solid elements.

solidFace() - Method in interface nxopen.cae.UserDefinedSolidBeamSectionBuilder

Returns the solid face
License requirements: None.

solidFaceType() - Method in interface nxopen.Face

Returns the Parasolid type of the face
License requirements: solid_modeling ("SOLIDS MODELING")
.

SolidPatchBuilder - Interface in nxopen.tooling

Represents a builder to be used to create a solid patch.

SolidPatchBuilder.SolidPatchType - Class in nxopen.tooling

Settings of the solid patch creation types.

SolidPatchCollection - Interface in nxopen.tooling

Represents a collection of SolidPatch builder
To obtain an instance of this class, refer to ToolingManager

Created in NX6.0.0

solidPatchs() - Method in interface nxopen.tooling.ToolingManager

Returns the SolidPatchCollection instance belonging to this part .

solidProperty() - Method in interface nxopen.cae.LaminatePly

Returns the ply solid property
License requirements: None.

SolidPropertyCheckBuilder - Interface in nxopen.cae

Represents a SolidPropertyCheckBuilder
To create a new instance of this class, use ModelCheckManager.createSolidPropertyCheckBuilder()

Created in NX5.0.1

SolidPropertyCheckBuilder.CoupledSolutionOutput - Class in nxopen.cae

Coupled Solution output option

SolidPropertyCheckBuilder.UserUnit - Class in nxopen.cae

User Specified output unit

SolidPunch - Interface in nxopen.features

Represents a Solid Punch feature
To create or edit an instance of this class, use SolidPunchBuilder

Created in NX6.0.2

SOLIDPUNCH - Static variable in class nxopen.tooling.ReusableObjectPasteBuilder.PasteMethods

SolidPunch

SolidPunchBuilder - Interface in nxopen.features.sheetmetal

Represents a SolidPunchBuilder
To create a new instance of this class, use SheetmetalManager.createSolidPunchBuilder(nxopen.features.Feature)

Created in NX5.0.0

SolidPunchBuilder.Types - Class in nxopen.features.sheetmetal

Represents the punch type

SolidPunchData() - Constructor for class nxopen.uf.UFModl.SolidPunchData

SolidPunchData(int, int, String, Tag, Tag, Tag, Tag, int, Tag[], boolean) - Constructor for class nxopen.uf.UFModl.SolidPunchData

SOLIDS - Static variable in class nxopen.cae.DurabilityStressAxesBuilder.NodeElementOptionEnum

Solids

SOLIDS - Static variable in class nxopen.cae.responsesimulation.NodalAveragingOption

solids() - Method in interface nxopen.geometricanalysis.SolidDensity

Returns the solids to set density for
License requirements: None.

solids() - Method in interface nxopen.ObjectTypeSelector

Returns the solids - This should be set to true if solids are desired in the output file
License requirements: None.

SolidToolBuilder - Interface in nxopen.cam

Represents a SolidTool Builder
This is an abstract class, and cannot be instantiated.

SolidTrackingBuilder - Interface in nxopen.cam

Represents a SolidTracking Builder
To create a new instance of this class, use Tool.createSolidTrackingBuilder(nxopen.cam.SolidTrackPoint)

Created in NX5.0.0

SolidTrackPoint - Interface in nxopen.cam

Represents an Track Point
To obtain an instance of this class us TrackPointCollection

Created in NX4.0.0

solidType - Variable in class nxopen.uf.UFUi.Mask

solidType() - Method in interface nxopen.weld.DatumCommonBuilder

Returns the solid body type specified.

solidType() - Method in interface nxopen.weld.WeldPointBuilder

Returns the output solid type.

solution() - Method in interface nxopen.AutomaticTraceline

Returns the solution used in the traceline
License requirements: assemblies ("ASSEMBLIES MODULE")
.

solution() - Method in interface nxopen.cae.LaminateDynamicSimBuilder

Returns the solution
License requirements: None.

solution() - Method in interface nxopen.cae.PreTestSolutionBuilder

Returns the pre-test working solution
License requirements: None.

Solution - Interface in nxopen.cae.responsesimulation

Represents a meta solution providing response analysis functionalities in the .sim file
To create or edit an instance of this class, use SolutionBuilder

Created in NX5.0.0

solution() - Method in interface nxopen.cae.SimSolutionStep

Returns the solution to which the step belongs
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

solution() - Method in interface nxopen.cae.SolutionResult

Returns the solution
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

solution() - Method in interface nxopen.motion.ResultMeasureBuilder

Returns the solution
License requirements: mechanisms ("MECHANISMS")
.

solution - Variable in class nxopen.tooling.SIZERExportBuilder.MechanicalData

Motion solution

SOLUTION_INFO - Static variable in class nxopen.uf.UFSf.ScenarioInfo

solutionAskDescriptorNx(Tag) - Method in interface nxopen.uf.UFSf

Refer to UF_SF_solution_ask_descriptor_nx for documentation.

solutionAskLanguageNx(Tag) - Method in interface nxopen.uf.UFSf

Refer to UF_SF_solution_ask_language_nx for documentation.

solutionAskLbcDescValidNx(Tag, Tag) - Method in interface nxopen.uf.UFSfl

Refer to UF_SFL_solution_ask_lbc_desc_valid_nx for documentation.

solutionAskNameNx(Tag) - Method in interface nxopen.uf.UFSf

Refer to UF_SF_solution_ask_name_nx for documentation.

solutionAskNthAllowableStepDescriptorNx(Tag, int) - Method in interface nxopen.uf.UFSfl

Refer to UF_SFL_solution_ask_nth_allowable_step_descriptor_nx for documentation.

solutionAskNthStepNx(Tag, int) - Method in interface nxopen.uf.UFSf

Refer to UF_SF_solution_ask_nth_step_nx for documentation.

solutionAskNumAllowableStepDescriptorsNx(Tag) - Method in interface nxopen.uf.UFSfl

Refer to UF_SFL_solution_ask_num_allowable_step_descriptors_nx for documentation.

solutionAskNumStepsNx(Tag) - Method in interface nxopen.uf.UFSf

Refer to UF_SF_solution_ask_num_steps_nx for documentation.

solutionAskPropertyByIndexNx(Tag, int) - Method in interface nxopen.uf.UFSf

Refer to UF_SF_solution_ask_property_by_index_nx for documentation.

solutionAskPropertyCountNx(Tag) - Method in interface nxopen.uf.UFSf

Refer to UF_SF_solution_ask_property_count_nx for documentation.

solutionAskPropertyNx(Tag, String) - Method in interface nxopen.uf.UFSf

Refer to UF_SF_solution_ask_property_nx for documentation.

solutionAskSolverPropertyByIndexNx(Tag, int) - Method in interface nxopen.uf.UFSf

Refer to UF_SF_solution_ask_solver_property_by_index_nx for documentation.

solutionAskSolverPropertyCountNx(Tag) - Method in interface nxopen.uf.UFSf

Refer to UF_SF_solution_ask_solver_property_count_nx for documentation.

solutionAskSolverPropertyNx(Tag, String) - Method in interface nxopen.uf.UFSf

Refer to UF_SF_solution_ask_solver_property_nx for documentation.

solutionAskStepDescriptorNx(Tag, String) - Method in interface nxopen.uf.UFSfl

Refer to UF_SFL_solution_ask_step_descriptor_nx for documentation.

SolutionAttributes - Interface in nxopen.cae.responsesimulation

Represents attributes setting of response analysis meta solution .

SolutionBuilder - Interface in nxopen.cae.responsesimulation

This is a manager to the Solution class.

SolutionCollection - Interface in nxopen.cae.responsesimulation

Represents a collection of response analysis meta solution
To obtain an instance of this class, refer to Manager

Created in NX5.0.0

solutionDescriptorAskNameNx(Tag) - Method in interface nxopen.uf.UFSfl

Refer to UF_SFL_solution_descriptor_ask_name_nx for documentation.

SOLUTIONLINE - Static variable in class nxopen.sim.MachineToolConfiguration.ControllerLines

The solutionline controller line

SolutionManager - Interface in nxopen.cae

Represents SolutionManager
To create a new instance of this class, use SimSimulation.createSolutionManager()

Created in NX10.0.0

solutionMergeOption() - Method in interface nxopen.cae.SolverAppendOption

Deprecated.

Deprecated in NX10.0.0. Functionality moved to the solver language DLLs.

solutionName() - Method in interface nxopen.cae.SimMotionLoadsListItemBuilder

Returns the solution name
License requirements: None.

solutionnames - Variable in class nxopen.cae.LaminatePostReportBuilder.SelectedSolutionsData

solutionObject() - Method in interface nxopen.motion.GraphObjectBuilder

Returns the solution object who owns the graph object
License requirements: None.

solutionPp - Variable in class nxopen.uf.UFSf.AskSolutionNxData

SolutionResult - Interface in nxopen.cae

Represents analysis results for a given SimSolution .

solutions() - Method in interface nxopen.cae.CorrelManager

Returns the correl solution collection belonging to this sim part .

solutions() - Method in interface nxopen.cae.responsesimulation.Manager

Returns the Response Dynamics solution collection belonging to this sim part .

solutions() - Method in interface nxopen.cae.SimSimulation

Returns the CAE Solution collection belonging to this sim part .

solutionSetNameNx(Tag, String, boolean) - Method in interface nxopen.uf.UFSf

Refer to UF_SF_solution_set_name_nx for documentation.

solutionStepTag - Variable in class nxopen.uf.UFSf.AskLvNxData

solutionTag - Variable in class nxopen.uf.UFSf.AskDursolNxData

solutionType() - Method in interface nxopen.cae.SimSolution

Returns the solution type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

solutionType() - Method in interface nxopen.motion.MotionSolutionBuilder

Returns the solution type
License requirements: None.

solve() - Method in interface nxopen.cae.AdaptivityMetaSolution

Solves the optimization solution
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

SOLVE - Static variable in class nxopen.cae.DurabilityEventSolverBuilder.SubmitOptionsEnum

Solve

SOLVE - Static variable in class nxopen.cae.DurabilitySolverBuilder.SubmitOptionsEnum

Solve

solve(boolean) - Method in interface nxopen.cae.LaminateDynamicEvent

Solve the event.

solve() - Method in interface nxopen.cae.optimization.DAOSolution

Solves the optimization solution
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

solve() - Method in interface nxopen.cae.optimization.TBSOptimizationSolution

Solves the optimization solution
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

solve(SimSolution.SolveOption, SimSolution.SetupCheckOption) - Method in interface nxopen.cae.SimSolution

Solves the solution
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

SOLVE - Static variable in class nxopen.cae.SimSolution.SolveOption

write solver input file and launch solve

solve() - Method in interface nxopen.motion.SpreadsheetRunControl

SpreadsheetRun solve function
License requirements: mechanisms ("MECHANISMS")
.

solve() - Method in interface nxopen.positioning.Network

Solves the constraint network.

SOLVE_INPUT_FILE - Static variable in class nxopen.cae.SimSolution.SolveOption

launch solve with existing solver input file

SOLVE_MODEL_QUALITY_RESULTS - Static variable in class nxopen.cae.SimSolution.SolveOption

solve model quality results

solveActiveSolutionNx(int) - Method in interface nxopen.uf.UFSf

Refer to UF_SF_solve_active_solution_nx for documentation.

solveAllMetaSolutions(SimSolution.SolveOption, SimSolution.SetupCheckOption, SimSolution.SolveMode, boolean) - Method in interface nxopen.cae.SimSolveManager

Solve all meta solutions in the sim document.

SolveAllMetaSolutionsData() - Constructor for class nxopen.cae.SimSolveManager.SolveAllMetaSolutionsData

solveAllPostponedConstraints() - Method in interface nxopen.PartCollection

Solves all the constraints, that have been postponed in their arrangement, in every loaded part in the session.

solveAllSolutions(SimSolution.SolveOption, SimSolution.SetupCheckOption, SimSolution.SolveMode, boolean) - Method in interface nxopen.cae.SimSolveManager

Solve all solutions in the sim document.

SolveAllSolutionsData() - Constructor for class nxopen.cae.SimSolveManager.SolveAllSolutionsData

solveChainOfSolutions(SimSolution[], SimSolution.SolveOption, SimSolution.SetupCheckOption, SimSolution.SolveMode) - Method in interface nxopen.cae.SimSolveManager

Solve the chain of solutions given in input.

SolveChainOfSolutionsData() - Constructor for class nxopen.cae.SimSolveManager.SolveChainOfSolutionsData

SOLVED - Static variable in class nxopen.positioning.Constraint.SolverStatus

The constraint is solved and satisfied

solveExciterConfig(PreTestExciterConfig) - Method in interface nxopen.cae.PreTestSolution

Solve exciter configuration
License requirements: nx_correl_base ("FE Correlation")
.

solveModel(double, int) - Method in interface nxopen.uf.UFMotion

Refer to UF_MOTION_solve_model for documentation.

solveNormalRunSolution() - Method in interface nxopen.motion.MotionSolution

Solve normal run solution
License requirements: mechanisms ("MECHANISMS")
.

solveOptionsCollection() - Method in interface nxopen.cae.DurabilityManager

Returns the durability solve options collection belonging to this sim part.

solvePlaces(Tag, Tag) - Method in interface nxopen.uf.UFRoute

Refer to UF_ROUTE_solve_places for documentation.

SolvePlacesData() - Constructor for class nxopen.uf.UFRoute.SolvePlacesData

solvePostponedConstraints() - Method in interface nxopen.assemblies.Arrangement

Forces a postponed Arrangement , that is not currently used in the session, to solve its constraints.

solvePostponedConstraints() - Method in interface nxopen.positioning.ComponentPositioner

Solves constraints in all arrangements that are currently postponing their solve.

solver() - Method in interface nxopen.cae.LaminateDrapingDataBuilder

Returns the solver
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

Solver - Class in nxopen.cae.optimization

Represents the optimization solution solver type

solver - Variable in class nxopen.uf.UFMotion.SolverParameters

SOLVER_PLY_STRESSES_AND_STRAINS - Static variable in class nxopen.cae.LaminateGraphicalReportBuilder.SolverInputType

Using solver ply stresses

SOLVER_SHELL_STRESS_RESULTANT - Static variable in class nxopen.cae.LaminateGraphicalReportBuilder.SolverInputType

Using solver shell stress resultants

SolverAndAnalysisTypeData() - Constructor for class nxopen.cae.BaseFemPart.SolverAndAnalysisTypeData

SolverAppendOption - Interface in nxopen.cae

This class provides access to the append option setting for importing solver specific data into existing Fem/Sim
Not support KF.

SolverAppendOption.ImportBehaviorOption - Class in nxopen.cae

Options to control how the imported input file is to be combined with the existing model

SolverAppendOption.MergeOption - Class in nxopen.cae

Options to control how entities are merge with existing model

SolverAppendOption.SolutionOption - Class in nxopen.cae

Options to control if a solution is created during merge

solverCardNameDisplayFlag() - Method in interface nxopen.cae.SimBCDisplay

Returns the true/false flag based on whether the solver card name of the BC is displayed in the graphics window
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

solverConvergencyLevel() - Method in interface nxopen.bodydes.OnestepUnformBuilder

Returns the convergency level of onestep solver.

solverConvergencyLevel() - Method in interface nxopen.die.TrimLineDevelopmentBuilder

Returns the convergency level of onestep solver.

solverDisplaySpringbackMode() - Method in interface nxopen.bodydes.OnestepUnformBuilder

Returns the option for springback display.

solverDoSpringbackCalculation() - Method in interface nxopen.bodydes.OnestepUnformBuilder

Returns the option to do springback calculation in onestep solver.

solverGeometryType() - Method in interface nxopen.positioning.ConstraintReference

Returns the geometry type of the constraint reference used during a solve.

solverInput() - Method in interface nxopen.cae.LaminateGraphicalReportBuilder

Returns the solver input type
License requirements: None.

solverInput() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

Returns the solver input
License requirements: None.

solverJoinOutputCurves() - Method in interface nxopen.bodydes.OnestepUnformBuilder

Returns the option to join output curves.

solverJoinOutputCurves() - Method in interface nxopen.die.TrimLineDevelopmentBuilder

Returns the option to join output curves.

solverMaxIterationSteps() - Method in interface nxopen.bodydes.OnestepUnformBuilder

Returns the maximum number of iteration steps in onestep solver.

solverMaxIterationSteps() - Method in interface nxopen.die.TrimLineDevelopmentBuilder

Returns the maximum number of iteration steps in onestep solver.

solverName() - Method in interface nxopen.cae.NamedPropertyTable

Returns the solver of lanugage of the descriptor that defines the type of the property table in named property table holder
License requirements: nx_masterfem ("Finite Element Modeling")
.

solverName() - Method in interface nxopen.cae.SolverAppendOption

Returns the solver name
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

solverName - Variable in class nxopen.uf.UFSf.AskLanguageData

solverOptionsPropertyTable() - Method in interface nxopen.cae.SimSolution

Returns the property table associated with the solution's solver options
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

SolverParameters() - Constructor for class nxopen.uf.UFMotion.SolverParameters

SolverParameters(UFMotion.Solver, double, double, int, int, int, int) - Constructor for class nxopen.uf.UFMotion.SolverParameters

solverPlyStress() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

Deprecated.

Deprecated in NX9.0.0. Use LaminateSpreadsheetReportBuilder.solverInput() instead.

solverResults() - Method in interface nxopen.motion.TirePropertyCdBuilder

Returns the solver results
License requirements: None.

solverSaveAnalysisResultsIntoFeature() - Method in interface nxopen.bodydes.OnestepUnformBuilder

Returns the option to save analysis result into feature.

solverSaveAnalysisResultsIntoFeature() - Method in interface nxopen.die.TrimLineDevelopmentBuilder

Returns the option to save analysis result into feature.

solverShellResultant() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

Deprecated.

Deprecated in NX9.0.0. Use LaminateSpreadsheetReportBuilder.solverInput() instead.

solverType() - Method in interface nxopen.cae.optimization.DAOSolution

Returns the optimization solution solver type
License requirements: None.

solverType() - Method in interface nxopen.cae.optimization.DAOSolutionBuilder

Returns the optimization solution solver type
License requirements: None.

solverType() - Method in interface nxopen.cae.SimSolution

Returns the solver type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

solverTypeName - Variable in class nxopen.cae.BaseFemPart.SolverAndAnalysisTypeData

the name of the solver.

solveSensorConfig(PreTestSensorConfig) - Method in interface nxopen.cae.PreTestSolution

Solve sensor configuration
License requirements: nx_correl_base ("FE Correlation")
.

solveTest() - Method in interface nxopen.cae.optimization.TBSIOptimizationTest

Solves optimization test
License requirements: cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.

solvingTolerance() - Method in interface nxopen.preferences.SessionSketch

Returns the sketch solving tolerance.

solvingTolerance() - Method in interface nxopen.preferences.SketchPreferences

Returns the sketch solving tolerance.

SOME - Static variable in class nxopen.pdm.PartFromPartBuilder.FileSaveAs

save selected during save as

SOME - Static variable in class nxopen.Sketch.ConstraintVisibility

Deprecated.

Certain constraints are visible.

SOME_CONSTRAINTS_NOT_TRANSFERRED - Static variable in class nxopen.features.SketchConversionStatus.ReasonType

The linked feature curves have been converted, but without some constraints

SOME_LOOPS_EXISTED - Static variable in class nxopen.tooling.EdgePatchBuilder.PatchStatus

Some loops existed in list

soPoint - Variable in class nxopen.uf.UFModeling.AskScaleData

soPoint - Variable in class nxopen.uf.UFModlFeatures.AskLocalScaleData

SORT - Static variable in class nxopen.blockstyler.Tree.NodeInsertOption

Node is sorted according to display text and placed accordingly in the hierarchy in which it is inserted

sort2Access() - Method in interface nxopen.cae.DurabilityTransientEventBuilder

Returns the sort2 access.

SORT_DIR_ASCENDING - Static variable in class nxopen.uf.UFTabnot.SortDirection

SORT_DIR_DESCENDING - Static variable in class nxopen.uf.UFTabnot.SortDirection

SORT_XCOORD - Static variable in class nxopen.cae.CAEConnectionBuilder.MethodTypeEnum

Based on sorted X coordinates

SORT_YCOORD - Static variable in class nxopen.cae.CAEConnectionBuilder.MethodTypeEnum

Based on sorted Y coordinates

SORT_ZCOORD - Static variable in class nxopen.cae.CAEConnectionBuilder.MethodTypeEnum

Based on sorted Z coordinates

sortColumn() - Method in interface nxopen.annotations.BendTableSettingsBuilder

Returns the column that is used to sort the bend table
License requirements: drafting ("DRAFTING")
.

sortColumn(int, BomListBuilder.BomListSortOption) - Method in interface nxopen.tooling.BomListBuilder

Sorts the given column.

sortComponentByInterPartDependency() - Method in interface nxopen.features.shipdesign.MirrorShipStructureBuilder

Sort components by inter-part dependency and return dependency circles.

SortComponentByInterPartDependencyData() - Constructor for class nxopen.features.shipdesign.MirrorShipStructureBuilder.SortComponentByInterPartDependencyData

SortData() - Constructor for class nxopen.uf.UFTabnot.SortData

SortData(int, UFTabnot.SortDirection) - Constructor for class nxopen.uf.UFTabnot.SortData

sortDirection - Variable in class nxopen.uf.UFTabnot.SortData

sortFeatures(Tag, Tag) - Method in interface nxopen.uf.UFModlGeneral

Refer to UF_MODL_sort_features for documentation.

sortIndex - Variable in class nxopen.uf.UFTabnot.SortData

sortOnUpdate() - Method in interface nxopen.annotations.BendTableSettingsBuilder

Returns the sort on update option
License requirements: drafting ("DRAFTING")
.

sortOnUpdate() - Method in interface nxopen.annotations.PartsListBuilder

Returns the sort on update option that determines whether or not the parts list sorts automatically during update
License requirements: None.

sortOnUpdate - Variable in class nxopen.uf.UFPlist.Prefs

sortOrder() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

Returns the sorting order
License requirements: None.

sortRegions() - Method in interface nxopen.cam.CutRegionsData

Sort regions
License requirements: cam_base ("CAM BASE")
.

sortRootNodes() - Method in interface nxopen.blockstyler.Tree

Returns the SortRootNodes.

sortRset(UFVariant, String) - Method in interface nxopen.uf.UFLib

Refer to UF_LIB_sort_rset for documentation.

sortType() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

Returns the sorting criteria
License requirements: None.

sortValueType - Variable in class nxopen.cae.ftk.OptionSetting.RecordOptionData

If want to sort value in x direction

soTag - Variable in class nxopen.uf.UFGdt.GeometricDefinition

SOUND_INSULATION - Static variable in class nxopen.annotations.AreaFillMaterial

Sound insulation

SOUND_INSULATION - Static variable in class nxopen.uf.UFDrf.AreaFillMaterial

SOUND_PRESSURE - Static variable in class nxopen.cae.Result.Quantity

SOUNDINSULATION - Static variable in class nxopen.uf.UFDrf.ValidMaterial

source - Variable in class nxopen.assemblies.ClearanceAnalysisBuilder.PairClearanceZoneData

the source of the clearance zone

source - Variable in class nxopen.cae.ClippingParameters.SelectedCoordinateSystemData

source - Variable in class nxopen.cae.ResultParameters.SelectedCoordinateSystemData

source - Variable in class nxopen.cam.BlankIpw.SourceData

the blank IPW source

source() - Method in interface nxopen.mechatronics.ObjectSinkBuilder

Returns the source select.

source() - Method in interface nxopen.mechatronics.ObjectTransformerBuilder

Returns the source select.

source() - Method in interface nxopen.mechatronics.RuntimeBehaviorBuilder

Returns the source.

source() - Method in interface nxopen.motion.AdoptionPair

Returns a source object
License requirements: mechanisms ("MECHANISMS")
.

source - Variable in class nxopen.uf.UFBrep.Mapping

source - Variable in class nxopen.uf.UFClear.AskObjectClearZoneData

source - Variable in class nxopen.uf.UFClear.AskPairClearZoneData

SOURCE_ITEM - Static variable in class nxopen.assemblies.ComponentAssembly.CheckinCheckoutOption

Checks in or Checks out the source item that is referenced by a reuse design element or subordinate design element

SOURCE_NOT_LOADED - Static variable in class nxopen.features.SketchConversionStatus.ReasonType

The linked feature curves have been converted with no constraints, because the source part for the selected feature is not loaded

SOURCE_SUPPRESSED - Static variable in class nxopen.features.SketchConversionStatus.ReasonType

The linked feature curves have been converted with no constraints, because a source feature of the selected feature is suppressed.

SOURCE_TARGET - Static variable in class nxopen.cae.MeshFromBoundaryBuilder.LoopOption

source target

SOURCE_TYPE_RECOGNIZED_FEATURE - Static variable in class nxopen.uf.UFMfm.SourceType

SOURCE_TYPE_STANDARD_FEATURE - Static variable in class nxopen.uf.UFMfm.SourceType

SOURCE_TYPE_TAGGED_ARC - Static variable in class nxopen.uf.UFMfm.SourceType

SOURCE_TYPE_TAGGED_EDGE - Static variable in class nxopen.uf.UFMfm.SourceType

SOURCE_TYPE_TAGGED_FACE - Static variable in class nxopen.uf.UFMfm.SourceType

SOURCE_TYPE_TAGGED_POINT - Static variable in class nxopen.uf.UFMfm.SourceType

SOURCE_TYPE_UNDEFINED - Static variable in class nxopen.uf.UFMfm.SourceType

SOURCE_TYPE_USER_DEFINED_FEATURE - Static variable in class nxopen.uf.UFMfm.SourceType

sourceBody() - Method in interface nxopen.tooling.DieEngStampingOutputBuilder

Returns the select die engineering sheet bodies
License requirements: die_engineering ("DIE ENGINEERING")
.

sourceBody - Variable in class nxopen.uf.UFWave.AskLinkMirrorData

sourceBuilder() - Method in interface nxopen.CGMBuilder

Returns the Source builder.

sourceBuilder() - Method in interface nxopen.PlotBuilder

Returns the Source builder.

sourceBuilder() - Method in interface nxopen.PrintBuilder

Returns the Source builder.

sourceBuilder() - Method in interface nxopen.PrintPDFBuilder

Returns the Source builder.

sourceCollection() - Method in interface nxopen.cae.SimLoadRecipe

Contains a SimLoadRecipeSourceCollection .

sourceConnector() - Method in interface nxopen.linedesigner.ConnectionCreatorBuilder

Returns the source connector
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

SourceData() - Constructor for class nxopen.cam.BlankIpw.SourceData

sourceDirection() - Method in interface nxopen.features.FlatteningAndFormingBuilder

Returns the source direction determines the orientation of the flattened surface.

sourceedges - Variable in class nxopen.features.CustomFeatureCreateFeatureGeometryEvent.CopyNXBodyData

The array of source edges

sourceEdgeSelection() - Method in interface nxopen.cae.EdgeSticherBuilder

Returns the source edge selection for Stitch Edge
License requirements: None.

sourceEdgeSelection() - Method in interface nxopen.cae.UnStitchEdgeBuilder

Returns the source edge selection for un-stitch Edge
License requirements: None.

sourceExpressions - Variable in class nxopen.InterpartExpressionsBuilder.ExpressionsData

array of source expressions

sourceFace() - Method in interface nxopen.cae.Mesh3dHexBuilder

Returns the source face
License requirements: nx_masterfem ("Finite Element Modeling")
.

sourceFace() - Method in interface nxopen.cae.MMCCreateBuilder

Returns the source face used when MMCCreateBuilder.type() is set to MMCCreateBuilder.Types.MANUAL .

sourceFaceList() - Method in interface nxopen.cae.Mesh3dHexBuilder

Returns the source face list
License requirements: nx_masterfem ("Finite Element Modeling")
.

sourcefaces - Variable in class nxopen.features.CustomFeatureCreateFeatureGeometryEvent.CopyNXBodyData

The array of source faces

sourceFaces() - Method in interface nxopen.features.FlatteningAndFormingBuilder

Returns the source faces that will be used to calculate the mapping of being flattened
License requirements: None.

sourceFeature() - Method in interface nxopen.features.PaintParametersBuilder

Returns the source feature
License requirements: None.

sourceFeatures() - Method in interface nxopen.features.shipdesign.ShipNavigatorNodeBuilder

Returns the list of features used to create ship navigator object node.

sourceGeom - Variable in class nxopen.uf.UFWave.AskLinkedFeatureMapData

sourceGroup() - Method in interface nxopen.cae.CAEConnectionBuilder

Returns the source group referenced by this connection
License requirements: nx_masterfem ("Finite Element Modeling")
.

sourceGroupReferenceState() - Method in interface nxopen.cae.CAEConnectionBuilder

Returns the state defining whether the source of this connection is defined with a group
License requirements: nx_masterfem ("Finite Element Modeling")
.

sourceLabel() - Method in interface nxopen.cae.SimLoadRecipeSource

Returns the label of a SimLoadRecipeSource .

sourceMesh() - Method in interface nxopen.cae.SurfaceCoatBuilder

Returns the selected source object(s)
License requirements: None.

sourceNodes() - Method in interface nxopen.cae.CAEConnectionBuilder

Returns the source Node(s)
License requirements: None.

sourceNodes() - Method in interface nxopen.cae.MorphRevolvedMeshBuilder

Returns the source nodes
License requirements: None.

sourceObject() - Method in interface nxopen.features.PaintParametersBuilder

Returns the source paintable object
License requirements: None.

sourceObject() - Method in interface nxopen.tooling.DesignTrimToolBuilder

Returns the face or sheet body.

sourceObject - Variable in class nxopen.uf.UFProcessAid.AskSourceObjectData

sourceObjectHandle - Variable in class nxopen.uf.UFWave.AskBrokenLinkSourcePartData

sourceObjects() - Method in interface nxopen.facet.BestFitAlignBuilder

Returns the source objects
License requirements: None.

sourceOption() - Method in interface nxopen.motion.FlexBodyBuilder

Returns the file type
License requirements: None.

sourceOrigin() - Method in interface nxopen.features.FlatteningAndFormingBuilder

Returns the source origin is a point on one of the source face.

sourcePart() - Method in interface nxopen.annotations.PmiWaveLinkBuilder

Returns the source part for the WAVE link
License requirements: solid_modeling ("SOLIDS MODELING")
.

sourcepart - Variable in class nxopen.cam.BlankIpw.SourceData

the part where the blank IPW source exists

sourcePart() - Method in interface nxopen.features.shipdesign.ShipPreparationInfo

Returns the source part file of the linked data.

sourcePart() - Method in interface nxopen.LinkedMirrorPartAttributeEditData

Returns the source part
License requirements: None.

sourcePartName - Variable in class nxopen.uf.UFWave.LinkedFeatureInfo

sourcePartNameAttribute() - Method in interface nxopen.drawings.ConversionProcessSettingsBuilder

Returns the Source part name
License requirements: None.

sourcePartOccurrence() - Method in interface nxopen.features.CompositeCurveBuilder

Returns the source part occurrence
License requirements: None.

sourcePartOccurrence() - Method in interface nxopen.features.ExtractFaceBuilder

Returns the source part occurrence
License requirements: None.

sourcePartOccurrence() - Method in interface nxopen.features.MirrorBodyBuilder

Returns the source part occurrence
License requirements: None.

sourcePartOccurrence() - Method in interface nxopen.features.WaveDatumBuilder

Returns the source part occurrence
License requirements: None.

sourcePartOccurrence() - Method in interface nxopen.features.WaveInterfaceLinkerBuilder

Returns the source part occurrence
License requirements: None.

sourcePartOccurrence() - Method in interface nxopen.features.WavePointBuilder

Returns the source part occurrence
License requirements: None.

sourcePartOccurrence() - Method in interface nxopen.features.WaveSketchBuilder

Returns the source part occurrence
License requirements: None.

sourceParts() - Method in interface nxopen.features.shipdesign.ShipNavigatorNodeBuilder

Returns the list of parts used to create ship navigator part nodes.

sourcePosition() - Method in interface nxopen.display.LightBuilder

Returns the source position - only applicable to spot and point light types
License requirements: None.

sourceScope() - Method in interface nxopen.assemblies.RelinkerBuilder

Returns the current source scope.

sourceSelection() - Method in interface nxopen.cae.CAEConnectionBuilder

Returns the selected source object(s)
License requirements: None.

sourceType() - Method in interface nxopen.cam.CAMFeature

Returns the source of the CAMFeature
License requirements: None.

sourceType() - Method in interface nxopen.mechatronics.ObjectTransformerBuilder

Returns the option to transform source.

sourceView() - Method in interface nxopen.drawings.SketchSectionLineBuilder

Returns the source view
License requirements: None.

SP_CURVE - Static variable in class nxopen.Edge.EdgeType

SP curve edge

SPACE_RESERVATION - Static variable in class nxopen.mechanicalrouting.PathStockPreferenceBuilder.AssignStockSubType

Space Reservation stock subtype.

SPACE_RESERVATION - Static variable in class nxopen.routing.PathStockBuilder.AssignStockType

Space Reservation stock type.

SPACE_RESERVATION - Static variable in class nxopen.routing.StockBrowserBuilder.TypeFilter

Space Reservation

SPACE_RESERVATION_AS_COMPONENT - Static variable in class nxopen.preferences.RoutingStock.SpaceReservationModeFlag

component created with solid body in the component

SPACE_VIEW_FACTOR - Static variable in class nxopen.cae.Result.Quantity

spaceBetweenCuts() - Method in interface nxopen.features.shipdesign.EdgeCutBuilder

Returns the distance between each cut.

spaceFactor() - Method in interface nxopen.annotations.LineWeldBuilder

Returns the space factor for the welding symbol
License requirements: None.

spaceFactor - Variable in class nxopen.uf.UFDrf.ChamferDimensionData

spaceFactor() - Method in interface nxopen.weld.WeldPmiBuilder

Returns the space factor.

spaceMeth - Variable in class nxopen.uf.UFCurve.SectionPerpcrvData

SpaceReservationBuilder - Interface in nxopen.routing

Represents a SpaceReservationBuilder This builder takes one or more segments and creates space reservation stock on it.

spaceReservationMode() - Method in interface nxopen.preferences.RoutingStock

Returns the space reservation creation mode
License requirements: routing_base ("Routing Basic")
.

spaceReservationTranslucency() - Method in interface nxopen.preferences.RoutingStock

Returns the desired translucnecy of the newly created Space Reservation Stock
License requirements: routing_base ("Routing Basic")
.

spaceSize() - Method in interface nxopen.preferences.PartVisualizationLine

Returns the space size.

spaceSize - Variable in class nxopen.uf.UFDisp.SystemParams

spaceType() - Method in interface nxopen.geometricutilities.PatternSpacing

Returns the type of spacing to be used by the pattern
License requirements: None.

spacing() - Method in interface nxopen.cae.AfuAbscissaHeaderInfo

Returns the value of spacing
License requirements: nx_ftk ("NX Advanced Graphing")
.

spacing() - Method in interface nxopen.cae.responsesimulation.RSEventAttributes

Returns the spacing type
License requirements: nx_response_anlys ("NX Response Analysis")
.

spacing() - Method in interface nxopen.features.IsoparametricCurvesBuilder

Returns the spacing to use when spacing is enabled
License requirements: None.

spacing() - Method in interface nxopen.features.shipdesign.EdgeCutBuilder

Returns the spacing (even distribution or custom defined)
License requirements: None.

spacing() - Method in interface nxopen.geometricanalysis.sectionanalysis.CircularGridBuilder

Returns the spacing specification for the circular grid
License requirements: studio_analyze ("STUDIO ANALYZE")
.

spacing() - Method in interface nxopen.geometricanalysis.sectionanalysis.CurveAlignedBuilder

Returns a value indicating the space between sections
License requirements: None.

spacing() - Method in interface nxopen.geometricanalysis.sectionanalysis.IsoparametricBuilder

Returns a value indicating the space between sections
License requirements: None.

spacing() - Method in interface nxopen.geometricanalysis.sectionanalysis.ParallelPlanesExBuilder

Returns a value indicating the space between sections
License requirements: None.

spacing() - Method in interface nxopen.geometricanalysis.sectionanalysis.QuadrilateralGridBuilder

Returns the spacing specification for the quadrilateral grid
License requirements: studio_analyze ("STUDIO ANALYZE")
.

spacing() - Method in interface nxopen.geometricanalysis.sectionanalysis.RadialBuilder

Returns a value indicating the space between sections
License requirements: None.

spacing() - Method in interface nxopen.geometricanalysis.sectionanalysis.TriangularGridBuilder

Returns the spacing specification for the triangular grid
License requirements: studio_analyze ("STUDIO ANALYZE")
.

spacing() - Method in interface nxopen.geometricanalysis.sectionanalysis.XYZPlaneBuilder

Returns a value indicating the space between sections
License requirements: None.

SPACING - Static variable in class nxopen.motion.CurveParameterizedTypes

User defined spacing type

spacing() - Method in interface nxopen.weld.FilletBuilder

Returns the linear dimension spacing indicates distance between each weld.

spacing() - Method in interface nxopen.weld.JointmarkGuideBuilder

Returns the spacing to determine the points along the guide curve.

spacing() - Method in interface nxopen.weld.WeldGrooveBuilder

Returns the spacing between welds
License requirements: ugweld ("UG WELD")
.

SPACING_LENGTH - Static variable in class nxopen.weld.FilletBuilder.EnumSkipWeldMethod

SPACING_LENGTH - Static variable in class nxopen.weld.WeldGrooveBuilder.SkipWeldMethod

Spacing and Length

SPACING_PER_PANEL_COMBINATION - Static variable in class nxopen.weld.WeldAdvisorCheckerType

spacing per panel combination

spacingAlongCurveType() - Method in interface nxopen.features.SectionCurveBuilder

Returns the type of spacing
License requirements: None.

spacingCalculateMethod() - Method in interface nxopen.weld.WeldPointBuilder

Returns the project method type.

spacingDistance() - Method in interface nxopen.weld.GrooveBuilder

Deprecated.

Deprecated in NX9.0.0. Use WeldGrooveBuilder.spacing() instead.

spacingElementSize() - Method in interface nxopen.cae.MeshControlBuilder

Returns the spacing element size
License requirements: nx_masterfem ("Finite Element Modeling")
.

spacingExpression() - Method in interface nxopen.geometricutilities.PatternSpacingsListItem

Returns the spacing expression
License requirements: None.

spacingExpression() - Method in interface nxopen.motion.PointOnCurveBuilder

Returns the user defined spacing
License requirements: None.

spacingExpression() - Method in interface nxopen.routing.DuctReinforcementBuilder

Returns the distance between each pair of reinforcement
License requirements: routing_hvac ("Routing HVAC")
.

spacingLength() - Method in interface nxopen.weld.WeldJointBuilder

Returns the spacing length when using WeldJointBuilder.SplitTypes.SKIP .

spacingMethod() - Method in interface nxopen.weld.EasyPatternBuilder

Returns the spacing method.

spacingMethod() - Method in interface nxopen.weld.JointmarkGuideBuilder

Returns the spacing method.

spacingNumber() - Method in interface nxopen.weld.WeldPointBuilder

Returns the spacing number
License requirements: ugweld ("UG WELD")
.

spacingNumberOfElements() - Method in interface nxopen.cae.MeshControlBuilder

Returns the spacing number of elements
License requirements: nx_masterfem ("Finite Element Modeling")
.

spacingOnPath() - Method in interface nxopen.geometricutilities.PatternSpacingsListItem

Returns the spacing OnPathDimensionBuilder
License requirements: None.

spacingOption - Variable in class nxopen.routing.SegmentManager.SubdivideOption

Spacing Option

spacingOption() - Method in interface nxopen.weld.JointmarkGuideBuilder

Returns the spacing option.

spacingsList() - Method in interface nxopen.geometricutilities.PatternSpacing

Returns the list of spacings (Expression or OnPathDimBuilder) to be used in this direction
License requirements: None.

SPAN - Static variable in class nxopen.geometricutilities.PatternSpacing.SpacingType

Specify a distance for which all instances should occupy.

spanAngle() - Method in interface nxopen.geometricutilities.AngularPatternSpacing

Returns the angle for the spacing of the pattern for the entire pattern.

spanAngle() - Method in interface nxopen.geometricutilities.PolygonPatternSpacing

Returns the angle for the spacing of the pattern for the entire pattern.

spanDistance() - Method in interface nxopen.geometricutilities.DistancePatternSpacing

Returns the distance for the spacing of the pattern for the entire pattern.

spanMethod - Variable in class nxopen.uf.UFCurve.OcfData

spareDialogForDragAndDrop() - Method in interface nxopen.linedesigner.ReuseLibraryDragData

Returns the spare dialog for drag and drop
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

SPARK - Static variable in class nxopen.display.CameraBuilder.LensFlare

spark lens

SPARK_PLUG - Static variable in class nxopen.cam.fbm.ThreadFeatureGeometry.Form

Form: Spark Plug

SPARK_PLUG - Static variable in class nxopen.cam.HoleBossGeom.FormTypes

Form: Spark Plug

sparkGap() - Method in interface nxopen.tooling.UndersizeBuilder

Returns the spark gap which is the gap between the electrode head and the work piece
License requirements: None.

SPARKING_BODY - Static variable in class nxopen.tooling.ElectrodeDeleteBuilder.Types

Delete sparking body from electrode.

SPARKPLUG - Static variable in class nxopen.cam.DrillThreadMillToolBuilder.ToolFormTypeTypes

Spark Plug

SPARSE_SOLVER - Static variable in class nxopen.uf.UFConstants

SpatialMap - Interface in nxopen.fields

Represents the Field Domain Map
A Spatial Map provides a mapping from a field's independent domain into a new domain space.

SpatialMap.BoundingBoxMapEnum - Class in nxopen.fields

Bounding Box Map

SpatialMap.ParametricPlaneMapEnum - Class in nxopen.fields

Parametric Plane Map

SpatialMap.SubtypeEnum - Class in nxopen.fields

Subtype of Spatial Map

SpatialMap.SubtypeMappingEnum - Class in nxopen.fields

Subtype Mapping

SpatialMap.TypeEnum - Class in nxopen.fields

Type of Spatial Map

SpatialMapBuilder - Interface in nxopen.fields

Represents a SpatialMap builder
Used to create and or edit a SpatialMap .

spatialResolution() - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder

Returns the maximum checking angle
License requirements: studio_free_form ("STUDIO FREE FORM")
.

spawn(String, int, String[], boolean) - Method in interface nxopen.uf.UFCfi

Refer to UF_CFI_spawn for documentation.

spawnCheckStatus(int) - Method in interface nxopen.uf.UFCfi

Refer to UF_CFI_spawn_check_status for documentation.

SpawnCheckStatusData() - Constructor for class nxopen.uf.UFCfi.SpawnCheckStatusData

SPC - Static variable in class nxopen.cae.optimization.TBSTopologyControllerOptimizationParameters.AutoFrozen

Elements with boundary conditions are excluded from the optimization

spCurveTolerance() - Method in interface nxopen.NXTo2dCreator

Returns the sp curve tolerance
License requirements: None.

SPECIAL_BASE - Static variable in class nxopen.uf.UFBrep.GeomType

specialBaseView() - Method in interface nxopen.drawings.ViewCreationWizardBuilder

Returns the special base view
License requirements: None.

specialEffectsVisualization() - Method in interface nxopen.preferences.SessionPreferences

Returns object for doing Visualization Special Effects preferences settings applicable to entire session .

SpecialFormingBuilder - Interface in nxopen.tooling

Creates special forming insert builder for progressive die.

SpecialFormingBuilder.BlockType - Class in nxopen.tooling

the block type

SpecialFormingBuilder.ParentValue - Class in nxopen.tooling

Specifies the main page type.

SpecialFormingBuilder.PunchOrDie - Class in nxopen.tooling

Specifies the main page type.

SpecialFormingBuilder.Types - Class in nxopen.tooling

Specifies the main page type.

specialization() - Method in interface nxopen.FileNew

Returns the specialization for the new file
License requirements: None.

SpecialPiercingInsertBuilder - Interface in nxopen.tooling

Creates special piercing insert for progressive die.No entity is returned.

SpecialPiercingInsertBuilder.BoundBoxType - Class in nxopen.tooling

Specifies the bounded box type block or cylinder.

SpecialPiercingInsertBuilder.InsertPositionTypes - Class in nxopen.tooling

Specifies the position of piercing inserts, for EDW only

SpecialPiercingInsertBuilder.NormalBottomBackingPlateSlugType - Class in nxopen.tooling

Specifies the type of bottom plate slug.

SpecialPiercingInsertBuilder.NormalCavityType - Class in nxopen.tooling

Specifies the type of cavity.

SpecialPiercingInsertBuilder.NormalDieShoeSlugType - Class in nxopen.tooling

Specifies the type of die shoe slug.

SpecialPiercingInsertBuilder.NormalOffsetSideType - Class in nxopen.tooling

Specifies the offset side of normal pierce insert design.

SpecialPiercingInsertBuilder.ParentPartTypes - Class in nxopen.tooling

Specifies the parent part type.

SpecialPiercingInsertBuilder.PunchOrDieTypes - Class in nxopen.tooling

Specifies the parent part type.

SpecialPiercingInsertBuilder.StandardOrUserDefinedTypes - Class in nxopen.tooling

Specifies the parent part type.

SpecialPiercingInsertBuilder.Types - Class in nxopen.tooling

Specifies the parent part type.

SPECIFIC_CAPACITIVE_ENERGY - Static variable in class nxopen.cae.Result.Quantity

SPECIFIC_CAPACITIVE_POWER - Static variable in class nxopen.cae.Result.Quantity

SPECIFIC_HUMIDITY - Static variable in class nxopen.cae.Result.Quantity

SPECIFIC_NOTE - Static variable in class nxopen.annotations.PmiFilterByType.Type

Indicates a PMI specific note type

SPECIFIC_NOTE_TYPE - Static variable in class nxopen.uf.UFPd.AttributeType

SPECIFICATION - Static variable in class nxopen.CGMBuilder.RelationOption

Specification

SPECIFICATION - Static variable in class nxopen.drawings.MarkAsTemplateBuilder.RelationTypeEnum

SPECIFICATION - Static variable in class nxopen.PrintPDFBuilder.RelationOption

Specification

specificationOption() - Method in interface nxopen.routing.DefineRunBuilder

Returns the specification of the run.

specificationsAddConnectionCompatibility(String, String, String) - Method in interface nxopen.routing.ReuseLibrary

Adds a connection compatibility to the specification.

specificationsAddGenericPostPlacement(String, String, String, String[]) - Method in interface nxopen.routing.ReuseLibrary

Add a generic post placmeent rule.

specificationsDefinePostPlacementRules(String, ReuseLibrary.PartType, String, String[]) - Method in interface nxopen.routing.ReuseLibrary

Defines Post Placement rules.

specificationsGetAttributeRelationships(String, String) - Method in interface nxopen.routing.ReuseLibrary

Gets the attribute relationships at a given library node.

SpecificationsGetAttributeRelationshipsData() - Constructor for class nxopen.routing.ReuseLibrary.SpecificationsGetAttributeRelationshipsData

specificationsGetBranchTable(String) - Method in interface nxopen.routing.ReuseLibrary

Gets the branch compatibilities for the input specification.

SpecificationsGetBranchTableData() - Constructor for class nxopen.routing.ReuseLibrary.SpecificationsGetBranchTableData

specificationsGetConnectionCompatibilities(String) - Method in interface nxopen.routing.ReuseLibrary

Get the list of connection compatibilities from the specificaiton.

SpecificationsGetConnectionCompatibilitiesData() - Constructor for class nxopen.routing.ReuseLibrary.SpecificationsGetConnectionCompatibilitiesData

specificationsGetConnectionPostPlacement(String, String, String) - Method in interface nxopen.routing.ReuseLibrary

Get post placement options for a given connection.

SpecificationsGetConnectionPostPlacementData() - Constructor for class nxopen.routing.ReuseLibrary.SpecificationsGetConnectionPostPlacementData

specificationsGetCurrent() - Method in interface nxopen.routing.ReuseLibrary

Returns the name of the current specification.

specificationsGetDescription(String) - Method in interface nxopen.routing.ReuseLibrary

Gets the description of a specification.

specificationsGetDisciplineSpecifications() - Method in interface nxopen.routing.ReuseLibrary

Returns the names of all of the specifications that are defined for the current discipline.

specificationsGetGeneralConnectionOptions(String) - Method in interface nxopen.routing.ReuseLibrary

Gets the general connection options.

SpecificationsGetGeneralConnectionOptionsData() - Constructor for class nxopen.routing.ReuseLibrary.SpecificationsGetGeneralConnectionOptionsData

specificationsGetGenericPostPlacements(String) - Method in interface nxopen.routing.ReuseLibrary

Gets the defined generic post placement rules.

SpecificationsGetGenericPostPlacementsData() - Constructor for class nxopen.routing.ReuseLibrary.SpecificationsGetGenericPostPlacementsData

specificationsGetGenericPostPlacementSearchAttributes(String, String, String) - Method in interface nxopen.routing.ReuseLibrary

Get the generic post placement search attributes.

specificationsGetPostPlacementRules(String, ReuseLibrary.PartType) - Method in interface nxopen.routing.ReuseLibrary

Gets post placement rules.

SpecificationsGetPostPlacementRulesData() - Constructor for class nxopen.routing.ReuseLibrary.SpecificationsGetPostPlacementRulesData

specificationsGetReportInBom(String) - Method in interface nxopen.routing.ReuseLibrary

Gets the Report in BOM flags.

SpecificationsGetReportInBomData() - Constructor for class nxopen.routing.ReuseLibrary.SpecificationsGetReportInBomData

specificationsRemoveBranchCompatibility(String, double, double) - Method in interface nxopen.routing.ReuseLibrary

Removes a branch compatibility
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

specificationsRemoveConnectionCompatibility(String, String, String) - Method in interface nxopen.routing.ReuseLibrary

Removes a connection compatibility from the specification.

specificationsRemoveGenericPostPlacement(String, String, String) - Method in interface nxopen.routing.ReuseLibrary

Remove a generic post placement option.

specificationsSetAttributeRelationships(String, String, CharacteristicList) - Method in interface nxopen.routing.ReuseLibrary

Sets the attribute relationships for a specification.

specificationsSetBranchCompatibility(String, double, double) - Method in interface nxopen.routing.ReuseLibrary

Sets a branch compatibility.

specificationsSetConnectionPostPlacement(String, String, String, boolean, boolean, boolean, boolean, boolean, boolean, boolean) - Method in interface nxopen.routing.ReuseLibrary

Set Connection post placement rules on a valid connection.

specificationsSetDescription(String, String) - Method in interface nxopen.routing.ReuseLibrary

Sets the description text for a specification.

specificationsSetGeneralConnectionOptions(String, boolean, boolean, double, double, double) - Method in interface nxopen.routing.ReuseLibrary

Sets the General Connection Options.

specificationsSetReportInBom(String, boolean, boolean, boolean, boolean, boolean, boolean, boolean, boolean) - Method in interface nxopen.routing.ReuseLibrary

Sets the report in BOM flags.

specificColor() - Method in interface nxopen.assemblies.AssembliesGeneralPropertiesBuilder

Returns the specific color flag.

SpecificNote - Interface in nxopen.annotations

Represents a Specific Note
To create or edit an instance of this class, use SpecificNoteBuilder

Created in NX6.0.0

SpecificNoteBuilder - Interface in nxopen.annotations

Represents a SpecificNote builder
To create a new instance of this class, use PmiAttributeCollection.createSpecificNoteBuilder(nxopen.annotations.SpecificNote)

Created in NX6.0.0

specificPartialShade() - Method in interface nxopen.assemblies.AssembliesGeneralPropertiesBuilder

Returns the specific partial shade flag.

specificTranslucency() - Method in interface nxopen.assemblies.AssembliesGeneralPropertiesBuilder

Returns the specific translucency flag.

SPECIFIED - Static variable in class nxopen.cae.Post.MarkColor

SPECIFIED - Static variable in class nxopen.cae.Post.MarkSize

SPECIFIED - Static variable in class nxopen.cae.Post.StreamlineColor

SPECIFIED - Static variable in class nxopen.cae.Post.Threshold

SPECIFIED - Static variable in class nxopen.cam.FirstPlunge.Positions

Specify

SPECIFIED - Static variable in class nxopen.features.HelixBuilder.OrientationOptions

Local coordinate system is specified by the user.

SPECIFIED - Static variable in class nxopen.fields.DisplayPropertiesBuilder.DepDomColorEnum

SPECIFIED - Static variable in class nxopen.PartImporter.DestinationCoordinateSystemSpecificationType

Use specified coordinate system.

SPECIFIED - Static variable in class nxopen.PasteSpecialBuilder.LayerOption

SPECIFIED_ATTRIBUTES - Static variable in class nxopen.preferences.SessionAssemblies.PartNameOption

SPECIFIED_COLOR - Static variable in class nxopen.visualreporting.GroupLabel.DisplayStyleOption

Matching objects will be shown using GroupLabel.color()

SPECIFIED_CSYS - Static variable in class nxopen.IgesCreator.CsysrefEnum

export data with respect to specified CSYS

SPECIFIED_DIRECTION - Static variable in class nxopen.features.GlobalShapingBuilder.DirectionMethodType

Overcrown is user specified direction

SPECIFIED_DIRECTION - Static variable in class nxopen.geometricanalysis.GapFlushnessBuilder.SectionAlignments

specified direction

SPECIFIED_LAYER - Static variable in class nxopen.assemblies.AssembliesGeneralPropertiesBuilder.LayerOptions

Objects will be placed on a user specified layer

SPECIFIED_LENGTH - Static variable in class nxopen.cae.Post.MarkMaximumSize

SPECIFIED_LENGTH - Static variable in class nxopen.cae.Post.StreamlineSize

SPECIFIED_NUMBER - Static variable in class nxopen.cae.WeldBuilder.NumberOfPointsOnEdgeType

Specify the number of points to be created on an edge

SPECIFIED_POINTS - Static variable in class nxopen.features.FitCurveBuilder.TargetSourceTypes

Specified points

SPECIFIED_PROJECTION_POINTS - Static variable in class nxopen.features.PointSetBuilder.CurvePointsType

Points will be created at minimum distance to curve.

SPECIFIED_STOCK - Static variable in class nxopen.mechanicalrouting.PathStockPreferenceBuilder.AssignMethod

Stock selected from Specify Item dialog

SPECIFIED_STOCK - Static variable in class nxopen.routing.PathStockBuilder.AssignMethod

Stock selected from Specify Item dialog

SPECIFIED_VALUE - Static variable in class nxopen.cae.Post.NoDataTreatment

SPECIFIED_VECTOR - Static variable in class nxopen.cam.InspectionConstructedFeatureBuilder.DirectionType

Use a user specified direction vector

specifiedColor - Variable in class nxopen.cae.Post.Mark

specifiedColor - Variable in class nxopen.cae.Post.Streamline

specifiedDir - Variable in class nxopen.uf.UFCurve.AnalysisDisplay

specifiedLayer() - Method in interface nxopen.tooling.AddReusableFeatureBuilder

Returns the specified layer
License requirements: None.

specifiedLengthValue - Variable in class nxopen.cae.Post.Mark

specifiedLengthValue - Variable in class nxopen.cae.Post.Streamline

specifiedMCF() - Method in interface nxopen.mechatronics.RuntimeNCBuilder

Returns the user specified MCF File.

specifiedNumberOfPoints() - Method in interface nxopen.cae.WeldBuilder

Returns the maximum number of points on the edge(s) used to specify the location of the weld
License requirements: None.

specifiedPlane() - Method in interface nxopen.geometricanalysis.sectionanalysis.CircularGridBuilder

Returns the user specified section plane
License requirements: None.

specifiedPlane() - Method in interface nxopen.geometricanalysis.sectionanalysis.CurveAlignedBuilder

Returns the user specified project plane
License requirements: None.

specifiedPlane() - Method in interface nxopen.geometricanalysis.sectionanalysis.ParallelPlanesExBuilder

Returns the user specified section plane
License requirements: None.

specifiedPlane() - Method in interface nxopen.geometricanalysis.sectionanalysis.QuadrilateralGridBuilder

Returns the user specified section plane
License requirements: None.

specifiedPlane() - Method in interface nxopen.geometricanalysis.sectionanalysis.TriangularGridBuilder

Returns the user specified section plane
License requirements: None.

specifiedRotationPoint() - Method in interface nxopen.geometricanalysis.sectionanalysis.RadialBuilder

Returns the rotation point
License requirements: None.

specifiedWallThicknessDim() - Method in interface nxopen.features.StepBuilder

Returns the wall thickness dimension
License requirements: None.

SPECIFY - Static variable in class nxopen.cae.CorrelAlignmentBuilder.ScalingChoice

User specified scaling factor

SPECIFY - Static variable in class nxopen.cae.DurabilityDataControlBuilder.TimeExtentsEnum

Specify

SPECIFY - Static variable in class nxopen.cae.LaminateDrapingDataBuilder.SecondaryVectorType

specify

SPECIFY - Static variable in class nxopen.cae.SimBcPlotContoursBuilder.ResolveOverlapType

SPECIFY - Static variable in class nxopen.cam.AreaMillingNonSteepContainment.AutoPatCenterTypes

Specify

SPECIFY - Static variable in class nxopen.cam.BladeCutLevels.RangeDepthTypes

Specify

SPECIFY - Static variable in class nxopen.cam.BladeEdge.EdgeDefinitionType

specify

SPECIFY - Static variable in class nxopen.cam.BoundaryTurnMemberCorner.FeedType

SPECIFY - Static variable in class nxopen.cam.BoundaryTurnMemberFeed.FeedType

SPECIFY - Static variable in class nxopen.cam.BoundaryTurnMemberFineFinishOffset.StatusValue

SPECIFY - Static variable in class nxopen.cam.BoundaryTurnVariableStockSet.FeedType

SPECIFY - Static variable in class nxopen.cam.CenterlineDrillTurningBuilder.StartPositionTypes

Start Position: Specify

SPECIFY - Static variable in class nxopen.cam.CutAngle.Types

User Defined

SPECIFY - Static variable in class nxopen.cam.CutParametersToolRunOffTypes

Specify

SPECIFY - Static variable in class nxopen.cam.DmAmBuilder.AutoPatCenterTypes

Specify

SPECIFY - Static variable in class nxopen.cam.DPMItpBuilder.SelectionMethodOption

specify

SPECIFY - Static variable in class nxopen.cam.EditSubopCommand.PointTypes

Specify

SPECIFY - Static variable in class nxopen.cam.GeometryGroup.DirectionTypes

derived blank direction using user defined

SPECIFY - Static variable in class nxopen.cam.GeometryGroup.OrientationTypes

derived blank orientation using user defined

SPECIFY - Static variable in class nxopen.cam.GeometrySet.LoopsIgnoreTypes

Deprecated.

specify

SPECIFY - Static variable in class nxopen.cam.HoleBossGeom.FormPitchTypes

Form and Pitch: Specify

SPECIFY - Static variable in class nxopen.cam.InitialProfilePlunge.Modes

Specify

SPECIFY - Static variable in class nxopen.cam.InPathEventDataBuilder.LocationMethod

Uses Point to define the InPath Events Location

SPECIFY - Static variable in class nxopen.cam.InspectionMoveBuilder.TipAngleTypes

Manual specify

SPECIFY - Static variable in class nxopen.cam.InspectionMoveBuilder.TipModeTypes

Manual specify

SPECIFY - Static variable in class nxopen.cam.InspectionOperationTransformBuilder.Angle

specify a angle

SPECIFY - Static variable in class nxopen.cam.InspectionOperationTransformBuilder.Line

specify a line

SPECIFY - Static variable in class nxopen.cam.LaserControlPoint.HeadOrientTypes

Specify

SPECIFY - Static variable in class nxopen.cam.LaserHeadOrientation.Types

Specify

SPECIFY - Static variable in class nxopen.cam.LaserPiercingPoint.Types

Specify

SPECIFY - Static variable in class nxopen.cam.LeadAngles.ControlTypes

specify

SPECIFY - Static variable in class nxopen.cam.MachinePocketGroupBuilder.RegisterType

Deprecated.

use specify

SPECIFY - Static variable in class nxopen.cam.MinCutDepth.Types

Specify

SPECIFY - Static variable in class nxopen.cam.MinCutLength.Types

Specify

SPECIFY - Static variable in class nxopen.cam.MultiBladeGeomBuilder.PartAxisOfRotationTypes

Specify

SPECIFY - Static variable in class nxopen.cam.NcmAvoidancePointBuilder.ToolAxisUsages

tool axis active

SPECIFY - Static variable in class nxopen.cam.NcmSmoothingBuilder.SmoothToleranceSources

specify tolerance type

SPECIFY - Static variable in class nxopen.cam.NcmTransferBuilder.AppDepToolAxisOptions

tool axis as specified

SPECIFY - Static variable in class nxopen.cam.NcmWedmBuilder.GlobalStopPointMethodTypes

stop points specified

SPECIFY - Static variable in class nxopen.cam.OffsetDataBuilder.OffsetDirectionMethod

along a vector

SPECIFY - Static variable in class nxopen.cam.OperationDisplayOptionsBuilder.PatternDisplayTypes

Pattern Display: Specify

SPECIFY - Static variable in class nxopen.cam.OperationTransformBuilder.Angle

specify a angle

SPECIFY - Static variable in class nxopen.cam.OperationTransformBuilder.Line

specify a line

SPECIFY - Static variable in class nxopen.cam.PartAxisBuilder.PartAxisOfRotationTypes

Specify

SPECIFY - Static variable in class nxopen.cam.ProbeCalibrateStylusMoveBuilder.Depth

Specify distance

SPECIFY - Static variable in class nxopen.cam.ProbeInspectBorebossMoveBuilder.Depth

Specify distance

SPECIFY - Static variable in class nxopen.cam.RotaryFinishGeomBuilder.PartAxisOfRotationTypes

Specify

SPECIFY - Static variable in class nxopen.cam.RoughFinishTurningBuilder.ExtendModeTypes

Specify

SPECIFY - Static variable in class nxopen.cam.RoughFinishTurningBuilder.MinimumAreaTypes

Old NX6 item

SPECIFY - Static variable in class nxopen.cam.RoughTurningBuilder.LevelDepthModeTypes

Level depth mode: Specify

SPECIFY - Static variable in class nxopen.cam.RoughTurningBuilder.PartOffPositionModeTypes

Part Off Position Mode: Specify

SPECIFY - Static variable in class nxopen.cam.SurfaceContourBuilder.AccessVectorMethodType

user specified

SPECIFY - Static variable in class nxopen.cam.ThreadTurningBuilder.InfeedLengthTypes

Specify

SPECIFY - Static variable in class nxopen.cam.ThreadTurningBuilder.InfeedModes

Specify

SPECIFY - Static variable in class nxopen.cam.ToolAxisTilt.TiltAngleTypes

User specifies the tilt angle

SPECIFY - Static variable in class nxopen.cam.ToolAxisVariable.MaximumLeadAngleTypes

Specify

SPECIFY - Static variable in class nxopen.cam.ToolAxisVariable.NominalLeadAngleTypes

Specify

SPECIFY - Static variable in class nxopen.cam.ToolPathEditorBuilder.ClearanceMethodType

SPECIFY - Static variable in class nxopen.cam.TurnConcaveCornerControl.RadiusOptions

Concave Corner Control radius option is Specify.

SPECIFY - Static variable in class nxopen.cam.TurnRoughFinishTestCut.StockModeTypes

Test Cut Stock Mode: Specify

SPECIFY - Static variable in class nxopen.cam.WedmGeomBuilder.SmoothLeadInTypes

smooth leadin type specify

SPECIFY - Static variable in class nxopen.cam.WedmGeomBuilder.SmoothLeadOutTypes

smooth leadin type specify

SPECIFY - Static variable in class nxopen.cam.WedmGeomBuilder.StopPointFlagTypes

stop point option specify

SPECIFY - Static variable in class nxopen.cam.WedmOperationBuilder.SmoothLeadInTypes

smooth leadin type specify

SPECIFY - Static variable in class nxopen.cam.WedmOperationBuilder.SmoothLeadOutTypes

smooth leadin type specify

SPECIFY - Static variable in class nxopen.cam.WedmOperationBuilder.StopPointFlagTypes

stop point option specify

SPECIFY - Static variable in class nxopen.cam.WedmPointDefinitionBuilder.PointStates

specify wedm point

SPECIFY - Static variable in class nxopen.cam.WedmPointDefinitionBuilder.WireAxisStates

wire axis vector

SPECIFY - Static variable in class nxopen.drawings.ViewCopyTo3dBuilder.DistanceFromViewPlaneOption

specify distance

SPECIFY - Static variable in class nxopen.drawings.ViewCopyTo3dBuilder.Option

Deprecated.

specify

SPECIFY - Static variable in class nxopen.features.EmbossJoggle.JoggleDirectionMethod

Indicates joggle direction to along user specified direction

SPECIFY - Static variable in class nxopen.sim.KinematicComponentBuilder.RegisterTypes

the register is specified

SPECIFY - Static variable in class nxopen.userdefinedtemplate.InstantiationBuilder.JaUserdefinedtemplateLayerOption

Outputs will be in user specified layer

SPECIFY_ANGLE - Static variable in class nxopen.cam.SplitSubopCommand.LinePlaneTypes

Line plane specify angle

SPECIFY_ANGLE - Static variable in class nxopen.sim.KinematicComponentBuilder.WorkPositionAngleTypes

angle is specified

SPECIFY_ANGLESAND_TIP - Static variable in class nxopen.cam.InspectionSensorMassEditBuilder.SensorSelectModeType

Manually specify probe angles and probe tip

SPECIFY_COLOR - Static variable in class nxopen.features.ColorFeatureBuilder.OperationType

assign color to feature

SPECIFY_COLOR - Static variable in class nxopen.features.ColorFeatureGroupBuilder.OperationType

assign color to feature

SPECIFY_COLOR - Static variable in class nxopen.preferences.PartVisualizationShade.ShadedFaceEdge

Specified Color

SPECIFY_CSYS - Static variable in class nxopen.features.shipdesign.CustomBracketBuilder.CreationMethod

SPECIFY_CSYS - Static variable in class nxopen.features.shipdesign.Cutout2Builder.CreationMethod

a csys is used to place this cutout

SPECIFY_CSYS - Static variable in class nxopen.features.shipdesign.PillarBuilder.CreationMethod

SPECIFY_CSYS - Static variable in class nxopen.features.shipdesign.ShipCutoutBuilder.CreationMethod

a csys is used to place this cutout

SPECIFY_CSYS - Static variable in class nxopen.features.shipdesign.ShipEndCutBuilder.CreationMethod

a csys is used to place this endcut

SPECIFY_CSYS - Static variable in class nxopen.features.shipdesign.SteelSupportBuilder.CreationMethod

SPECIFY_CSYS - Static variable in class nxopen.features.shipdesign.WeldCut2Builder.CreationMethod

SPECIFY_CSYS - Static variable in class nxopen.features.shipdesign.WeldCutBuilder.CreationMethod

SPECIFY_DAMPING - Static variable in class nxopen.cae.CorrelSolutionBuilder.EnumDampingFrftype

from user input

SPECIFY_DOF_VALUES - Static variable in class nxopen.cae.ConflictResolutionBuilder.Rule

specify dof values on the intersection

SPECIFY_DOF_VALUES - Static variable in class nxopen.cae.ConstraintResolutionBuilder.Rule

Deprecated.

specify dof values on the intersection

SPECIFY_FEATURES - Static variable in class nxopen.cam.GroupFeatures.FeaturesToGroupTypes

SPECIFY_FILTER - Static variable in class nxopen.LoadOptions.LoadComponents

display list of pre-defined component groups to select from

SPECIFY_INDEX - Static variable in class nxopen.cae.ResultProbeBuilder.IterationSelection

SPECIFY_INDEX - Static variable in class nxopen.cae.ResultProbeBuilder.LoadcaseSelection

SPECIFY_INTERIOR_POSITION - Static variable in class nxopen.features.OffsetSurfaceBuilder.OrientationMethodType

SPECIFY_LINE - Static variable in class nxopen.features.shipdesign.PillarBuilder.CreationMethod

SPECIFY_LINE - Static variable in class nxopen.features.shipdesign.SteelSupportBuilder.CreationMethod

SPECIFY_PLANE - Static variable in class nxopen.features.TrimCurveBuilder.FirstBoundingObjectOptions

Define plane

SPECIFY_PLANE - Static variable in class nxopen.features.TrimCurveBuilder.SecondBoundingObjectOptions

Define plane

SPECIFY_POINT - Static variable in class nxopen.OriginMethod

Specify Point

SPECIFY_POINT - Static variable in class nxopen.tooling.WireHoleBuilder.Types

SPECIFY_PROBE_ANGLES - Static variable in class nxopen.cam.InspectionSensorMassEditBuilder.SensorSelectModeType

Manually specify probe angles

SPECIFY_PROBE_TIP - Static variable in class nxopen.cam.InspectionSensorMassEditBuilder.SensorSelectModeType

Manually specify probe tip

SPECIFY_RANGE - Static variable in class nxopen.cae.ResultProbeBuilder.IterationSelection

SPECIFY_SENSOR - Static variable in class nxopen.cam.InspectionSensorMassEditBuilder.SensorSelectModeType

Manually specify sensor

SPECIFY_VECTOR - Static variable in class nxopen.geometricanalysis.CurveAnalysisCombsBuilder.DirectionOptionType

Deprecated.

specify vector

SPECIFY_VECTOR - Static variable in class nxopen.geometricanalysis.CurveAnalysisInflectionsBuilder.DirectionOptionType

Deprecated.

specify vector

SPECIFY_VECTOR - Static variable in class nxopen.geometricanalysis.CurveAnalysisPeaksBuilder.DirectionOptionType

Deprecated.

specify vector

SPECIFY_VECTOR - Static variable in class nxopen.geometricanalysis.CurveAnalysisRecord.DirectionOptionType

Deprecated.

specify vector

SpecifyAxis - Interface in nxopen.blockstyler

Represents a Specify Axis block .

specifyBaffle() - Method in interface nxopen.tooling.ToolingManager

Returns the SpecifyBaffleCollection instance belonging to this part .

SpecifyBaffleBuilder - Interface in nxopen.tooling

Represents a builder to be used to create specify baffle.

SpecifyBaffleBuilder.AttributeTypes - Class in nxopen.tooling

Types to specify how to assign attributes to the selected body.

SpecifyBaffleBuilder.ChannelColorData - Class in nxopen.tooling

This class holds the data returned from SpecifyBaffleBuilder.getChannelColor()

SpecifyBaffleCollection - Interface in nxopen.tooling

Represents a collection of Specify Baffle builder
To obtain an instance of this class, refer to ToolingManager

Created in NX8.0.0

specifyBlend() - Method in interface nxopen.features.DeleteFaceBuilder

Returns the flag of treating all input faces as blend, don't use it until further notification
License requirements: None.

specifyCircuit() - Method in interface nxopen.tooling.ToolingManager

Returns the SpecifyCircuitCollection instance belonging to this part .

SpecifyCircuitBuilder - Interface in nxopen.tooling

Represents a builder to be used to create specify circuit.

SpecifyCircuitCollection - Interface in nxopen.tooling

Represents a collection of Specify Circuit builder
To obtain an instance of this class, refer to ToolingManager

Created in NX8.0.0

specifyClearanceDataFile() - Method in interface nxopen.tooling.ClearanceManagementBuilder

Returns the name and full path of specified file.

specifyClsf(String) - Method in interface nxopen.cam.DmTpBuilder

Specifies the clsf file, including both the directory path and file name.

specifyColor() - Method in interface nxopen.features.ColorFeatureBuilder

Returns the specified color option.

specifyConfiguration(String) - Method in interface nxopen.cam.CAMSession

Specify the configuration file of the current cam session
License requirements: cam_base ("CAM BASE")
.

specifyContinuation() - Method in interface nxopen.drawings.DrawingRegionBuilder

Returns the continuation
License requirements: None.

specifyConvexFacets - Variable in class nxopen.facet.FacetingParameters

This indicates that the facets generated by the faceter should all be convex (this does not apply to JT).

specifyConvexFacets - Variable in class nxopen.uf.UFFacet.Parameters

SpecifyCSYS - Interface in nxopen.blockstyler

Represents a Specify CSYS block .

specifyCsys(String, int, Tag) - Method in interface nxopen.uf.UFUi

Refer to UF_UI_specify_csys for documentation.

SpecifyCsysData() - Constructor for class nxopen.uf.UFUi.SpecifyCsysData

SpecifyCsysReturn - Variable in class nxopen.uf.UFUi.SpecifyCsysData

specifyCurves() - Method in interface nxopen.annotations.ArbitraryAreaSeedBuilder

Returns the specify curves
License requirements: None.

specifyCurveTolerance - Variable in class nxopen.facet.FacetingParameters

This indicates that values are to be specified for curveDistanceTolerance and curveAngularTolerance and curve_max_length.

specifyCurveTolerance - Variable in class nxopen.uf.UFFacet.Parameters

SpecifyDateBuilder - Interface in nxopen.visualreporting

Represents a Specify Date Builder
To create a new instance of this class, use VisualReportManager.createSpecifyDateBuilder()

Created in NX8.0.0

specifyDieTip() - Method in interface nxopen.tooling.LayoutManagementBuilder

Returns the specify die tip to define the forming direction
License requirements: None.

specifyDirection() - Method in interface nxopen.features.shipdesign.RollingLineBuilder

Returns the initial flow direction.

specifyDistance() - Method in interface nxopen.cam.IpwContainmentCurvesBuilder

Returns the specify distance
License requirements: None.

specifyFloorPlane() - Method in interface nxopen.display.Stage

Returns the specify floor plane
License requirements: None.

specifyGroundPlane() - Method in interface nxopen.display.EnvironmentBuilder

Returns the specify ground plane
License requirements: None.

SpecifyLocation - Interface in nxopen.blockstyler

Represents a Specify Location block .

specifyMaxFacetSize - Variable in class nxopen.uf.UFFacet.Parameters

specifyMaximumFacetSize - Variable in class nxopen.facet.FacetingParameters

This indicates that a maximum width of facet is to be specified using maximumFacetSize.

SpecifyOrientation - Interface in nxopen.blockstyler

Represents Specify Orientation block .

specifyParameters - Variable in class nxopen.facet.FacetingParameters

This indicates that the model will be created with the parametric information for each vertex.

specifyParameters - Variable in class nxopen.uf.UFFacet.Parameters

SpecifyPlane - Interface in nxopen.blockstyler

Represents a Specify Plane block .

specifyPlane() - Method in interface nxopen.die.DiePlaneBuilder

Returns the specified plane
License requirements: None.

specifyPlane() - Method in interface nxopen.display.TrueShadingBuilder

Returns the custom plane definition for the shadow projection
License requirements: None.

specifyPlane() - Method in interface nxopen.features.WrapBuilder

Returns the specified plane that the curves are being wrapped from or unwrapped to.

specifyPlane(String, int, int, double[], double[]) - Method in interface nxopen.uf.UFUi

Refer to UF_UI_specify_plane for documentation.

SpecifyPlaneData() - Constructor for class nxopen.uf.UFUi.SpecifyPlaneData

specifyPlate() - Method in interface nxopen.routing.PlatformCreatorBuilder

The specify plate button callback
License requirements: routing_platform ("Routing Platform")
.

specifyPoint() - Method in interface nxopen.annotations.ArbitraryAreaSeedBuilder

Returns the specify point
License requirements: None.

SpecifyPoint - Interface in nxopen.blockstyler

Represents a Specify Point block .

specifyPoint() - Method in interface nxopen.cam.IpwContainmentCurvesBuilder

Returns the specify point
License requirements: None.

specifypoint - Variable in class nxopen.cam.TurnAvoidancePathPointsBuilder.PointData

selected point

specifypoint - Variable in class nxopen.cam.TurnAvoidancePathPointsBuilder.PointListData

selected point

specifyPoint() - Method in interface nxopen.features.shipdesign.OrientationPointMethodsBuilder

Returns the point used to determine the boundary of the region.

specifyPoint() - Method in interface nxopen.FlatteningBuilder

Deprecated.

Deprecated in NX11.0.0. Use FlatteningAndFormingBuilder instead.

specifyPoint() - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder

Returns the specified points
License requirements: None.

specifyPoint() - Method in interface nxopen.layout2d.InsertComponentBuilder

Returns the point specified to put the 2D Component instance
License requirements: None.

specifyPoints() - Method in interface nxopen.features.IFormBuilder

Returns the specified points to define iso-parameter curve
License requirements: None.

specifyPoints() - Method in interface nxopen.geometricutilities.CurveShapingBuilder

Returns the specified points to define insertion point locations
License requirements: None.

specifyPrimaryDirection() - Method in interface nxopen.FlatteningBuilder

Deprecated.

Deprecated in NX11.0.0. Use FlatteningAndFormingBuilder instead.

SpecifyRuleBuilder - Interface in nxopen.drafting

This class is used to specify knowledge fusion rule for a note object in a drawing template.

SpecifySectionLineBuilder - Interface in nxopen.drawings

Select a section line .

specifySurfaceTolerance - Variable in class nxopen.facet.FacetingParameters

If this value is true, then values must be specified for surfaceDistanceTolerance and surfaceAngularTolerance.

specifySurfaceTolerance - Variable in class nxopen.uf.UFFacet.Parameters

specifyToolPath(String) - Method in interface nxopen.cam.DmTpBuilder

Specifies the tool path name.

SpecifyVector - Interface in nxopen.blockstyler

Represents Specify Vector block .

specifyVector() - Method in interface nxopen.drawings.HingeLineBuilder

Returns the direction for the hinge line
License requirements: None.

specifyVector(String, int, int) - Method in interface nxopen.uf.UFUi

Refer to UF_UI_specify_vector for documentation.

SpecifyVectorData() - Constructor for class nxopen.uf.UFUi.SpecifyVectorData

specifyViewDirection - Variable in class nxopen.facet.FacetingParameters

Should we use a viewing direction for denser faceting around silhouettes.

specifyViewDirection - Variable in class nxopen.uf.UFFacet.Parameters

specifyXPlane() - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder

Returns the plane specifying the X direction for the coordinate system.

specifyYPlane() - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder

Returns the plane specifying the Y direction for the coordinate system.

spectralLine() - Method in interface nxopen.cae.responsesimulation.FrequencyDefinition

Returns the additional spectral lines.

spectralLines() - Method in interface nxopen.cae.responsesimulation.RSEventAttributes

Returns the spectral lines setting.

spectrum() - Method in interface nxopen.cae.LaminateFiberOrientationOptionsBuilder

Returns the spectrum
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

spectrum - Variable in class nxopen.cae.Post.Colorbar

SPECTRUM - Static variable in class nxopen.cae.XyFunctionDataType

Function is Spectrum

SPECTRUM - Static variable in class nxopen.cae.XyFunctionGeneralType

Function is Spectrum

SPECTRUM - Static variable in class nxopen.cae.XyFunctionLoadType

Function is Spectrum

SPECTRUM - Static variable in class nxopen.cae.XyFunctionResponseType

Function is Spectrum

SPECTRUM - Static variable in class nxopen.fields.DisplayPropertiesBuilder.DepDomColorEnum

spectrumLevels() - Method in interface nxopen.fields.DisplayPropertiesBuilder

Returns the spectrum levels
License requirements: None.

specularFactor - Variable in class nxopen.DisplayManager.J3dMaterial

specular reflection coeficient

speed() - Method in interface nxopen.cam.InspectionMethodBuilder

Returns the default animation speed setting
License requirements: None.

speed() - Method in interface nxopen.geometricutilities.PlayButtonsBuilder

Returns the speed
License requirements: None.

speed() - Method in interface nxopen.mechatronics.PositionControlBuilder

Returns the speed.

speed() - Method in interface nxopen.mechatronics.SpeedControlBuilder

Returns the speed.

speed() - Method in interface nxopen.tooling.UnfoldingSimulationBuilder

Returns the speed
License requirements: None.

speed - Variable in class nxopen.uf.UFPath.SpindleOn

SpeedControl - Interface in nxopen.mechatronics

Represents the Speed Control.

SpeedControlBuilder - Interface in nxopen.mechatronics

Represents a SpeedControl builder.

SpeedControlBuilder.AxisJointType - Class in nxopen.mechatronics

the Axis Joint types.

SpeedControlCollection - Interface in nxopen.mechatronics

Represents a collection of Speed Constraint.

speedControls() - Method in interface nxopen.mechatronics.PhysicsManager

Returns the SpeedControlCollection belonging to this part
Created in NX7.5.1

speedFlag - Variable in class nxopen.uf.UFPath.SpindleOn

speedGraph - Variable in class nxopen.tooling.SIZERExportBuilder.MechanicalData

Speed graph in solution

speedOption() - Method in interface nxopen.cae.optimization.TBSTopologyControllerOptimizationParameters

Returns the speed size of increment
License requirements: None.

SpeedPositionControlDirectiontype - Class in nxopen.mechatronics

the control direction types

SPFTOLERANCE - Static variable in class nxopen.cam.InspectionAlignmentAssistantBuilder.AlignType

SPF Tolerance alignment type

SPHERE - Static variable in class nxopen.cae.PrimitiveRecipeMeshBuilder.Type

Sphere Primitive

SPHERE - Static variable in class nxopen.cam.CamInspectionOperationFeaturetypes

Sphere

SPHERE - Static variable in class nxopen.cam.InspectionConstructedFeatureBuilder.ConstFeatType

Constructed Sphere Feature

SPHERE - Static variable in class nxopen.cam.InspectionMethodBuilder.MethodTypes

Sphere

SPHERE - Static variable in class nxopen.cam.InspectionMoveBuilder.ProbeTipTypes

Sphere tip

SPHERE - Static variable in class nxopen.cam.InspectionProbeTrackingBuilder.TipTypes

Sphere

SPHERE - Static variable in class nxopen.cam.InspectionSensorBuilder.SensorTipTypes

Sphere

SPHERE - Static variable in class nxopen.cam.NcmClearanceBuilder.ClearanceTypes

clearance sphere

SPHERE - Static variable in class nxopen.cam.ProbeCalibrateSphereMoveBuilder.Geometry

Sphere

sphere() - Method in interface nxopen.cam.ProbeCalibrateSphereMoveBuilder

Returns the sphere to probe
License requirements: None.

Sphere - Interface in nxopen.features

Represents a sphere feature
To create or edit an instance of this class, use SphereBuilder

Created in NX6.0.0

SPHERE - Static variable in class nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilder.Types

Deprecated.

SPHERE - Static variable in class nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilderEx.Types

SPHERE - Static variable in class nxopen.mechatronics.CollisionBodyBuilder.CollisionShapeTypes

Sphere

SPHERE - Static variable in class nxopen.mechatronics.CollisionSensorBuilder.CollisionShapeTypes

Sphere

SPHERE - Static variable in class nxopen.positioning.ConstraintReference.GeometryType

Sphere

SPHERE - Static variable in class nxopen.weld.DatumCommonBuilder.SolidTypes

Datum solid will be a sphere

SPHERE3D - Static variable in class nxopen.preferences.SessionModeling.PoleEditStyleType

SPHERE_FACE_BLEND - Static variable in class nxopen.die.AddendumSectionBuilder.SurfaceBuildType

Create spherical blend surface.

SPHERE_FACE_BLEND - Static variable in class nxopen.die.AddSurfBuilder.Methods

Spherical type face blend.

SPHERE_GEOM - Static variable in class nxopen.uf.UFBrep.GeomType

SPHERE_ORIGIN_AND_DIAMETER - Static variable in class nxopen.cae.BoundingVolumeBuilder.Types

sphereAxisMethod() - Method in interface nxopen.cam.InspectionUVGridBuilder

Returns the method for determining the axis for a sphere
License requirements: None.

sphereAxisVector() - Method in interface nxopen.cam.InspectionUVGridBuilder

Returns the sphere axis vector
License requirements: None.

SphereBuilder - Interface in nxopen.features

Represents a Sphere builder.

SphereBuilder.Types - Class in nxopen.features

Represents the sphere types.

SPHERES - Static variable in class nxopen.cae.Post.Style

SPHERES - Static variable in class nxopen.cam.InspectionPatternFeatureBuilder.FeatureFilterTypes

Only sphere inspection features will be listed

sphereSubdivisionLevelOption() - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilderEx

Returns the subdivision level.

SPHERICAL - Static variable in class nxopen.annotations.DatumTargetBuilder.Types

spherical

SPHERICAL - Static variable in class nxopen.annotations.DiameterSymbol

Specifies spherical symbol

SPHERICAL - Static variable in class nxopen.annotations.FeatureControlFrameDataBuilder.AreaSymbolType

Spherical

SPHERICAL - Static variable in class nxopen.annotations.SearchCriteriaDatumTargetBuilder.DatumTargetTypes

spherical type

SPHERICAL - Static variable in class nxopen.annotations.ToleranceZoneShape

Specifies spherical zone shape

SPHERICAL - Static variable in class nxopen.cae.AssignNodalCSBuilder.CSType

spherical

SPHERICAL - Static variable in class nxopen.cae.PostGraphAlongPathBuilder.CsysType

SPHERICAL - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamTolZoneShape

Spherical

SPHERICAL - Static variable in class nxopen.die.DrawBeadTaperBuilder.TaperTypes

Create a spherical end based on a radius.

SPHERICAL - Static variable in class nxopen.display.CgfxMattexBuilder.TextureSpaceShader

Deprecated.

for spherical geometry

SPHERICAL - Static variable in class nxopen.display.IrayPlusSimpleMaterialEditorBuilder.TextureSpace

SPHERICAL - Static variable in class nxopen.Face.FaceType

Spherical face

SPHERICAL - Static variable in class nxopen.facet.FacetedFace.FacetedfaceType

Spherical face

SPHERICAL - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.MirrorSurfaceType

Represents the spherical mirror surface

SPHERICAL - Static variable in class nxopen.fields.SpatialMap.TypeEnum

Map to spherical csys

SPHERICAL - Static variable in class nxopen.motion.JointDefine.Type

This joint type allows three rotations.

SPHERICAL - Static variable in class nxopen.tooling.UndersizeBuilder.Orbit

spherical

SPHERICAL_DIAMETER - Static variable in class nxopen.annotations.FeatureControlFrameDataBuilder.ToleranceZoneShape

spherical diameter

SPHERICAL_DIAMETER - Static variable in class nxopen.annotations.SearchCriteriaDimensionBuilder.DiameterSymbolOptions

SPHERICAL_DIAMETER - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.ZoneShapeOptions

spherical diameter

SPHERICAL_DIAMETER_SYMBOL - Static variable in class nxopen.uf.UFDrf.DiameterSymbol

SPHERICAL_HORIZON - Static variable in class nxopen.geometricanalysis.ReflectionAnalysisBuilder.SceneImageType

Spherical horizon.

SPHERICAL_JOINT - Static variable in class nxopen.uf.UFMotion.JointType

SPHERICAL_LIGHT_TUBES_ROOM - Static variable in class nxopen.geometricanalysis.ReflectionAnalysisBuilder.SceneImageType

Spherical light tubes room.

SPHERICAL_MILL - Static variable in class nxopen.cam.MillToolBuilder.CutterSubtypes

Spherical MillTool

SPHERICAL_MILL - Static variable in class nxopen.features.AnalyzePocketBuilder.ToolTypes

Spherical Mill.

SPHERICAL_MILL - Static variable in class nxopen.features.BlendPocketBuilder.ToolTypes

Spherical Mill.

SPHERICAL_ROOM - Static variable in class nxopen.geometricanalysis.ReflectionAnalysisBuilder.SceneImageType

Spherical room.

SPHERICAL_TEXTURE_SPACE - Static variable in class nxopen.uf.UFDisp.TextureSpaceType

SPHERICAL_TUBES - Static variable in class nxopen.geometricanalysis.ReflectionAnalysisBuilder.SceneImageType

Spherical tubes.

SphericalCoordinateSystem - Interface in nxopen

Represents a spherical coordinate system
To create a new instance of this class, use CoordinateSystemCollection.createSphericalCoordinateSystem(nxopen.Point3d, nxopen.Vector3d, nxopen.Vector3d)

Created in NX4.0.0

SphericalCorner - Interface in nxopen.features

Represents a spherical corner feature
To create or edit an instance of this class, use SphericalCornerBuilder

Created in NX8.5.0

SphericalCornerBuilder - Interface in nxopen.features

Represents a SphericalCorner builder
To create a new instance of this class, use FeatureCollection.createSphericalCornerBuilder(nxopen.features.SphericalCorner)
Default values.

SPIDER - Static variable in class nxopen.cae.ElementTypeBuilder.ElementType

Spider Connection

SPIDER - Static variable in class nxopen.cae.ElementTypes.Shape

Spider

SPIDER_JUNCTION - Static variable in class nxopen.cae.BoltBuilder.BoltOperation

Creates a spider connection at junctions

SpiderElementBuilder - Interface in nxopen.cae

Represents a SpiderElementBuilder
To create a new instance of this class, use NodeElementManager.createSpiderElementBuilder()

Created in NX5.0.1

SpiderElementBuilder.NewMeshType - Class in nxopen.cae

Option to create new mesh or add to existing mesh

spiderElementType() - Method in interface nxopen.cae.BoltBuilder

Returns the element type to be created for the spider
License requirements: None.

spiderLegNodes() - Method in interface nxopen.cae.ElementConnectivityBuilder

Returns the spider element leg nodes.

spiderMesh() - Method in interface nxopen.cae.CAEConnection

Returns the spider mesh associated to this recipe which can be NULL
License requirements: nx_masterfem ("Finite Element Modeling")
.

spikeLength() - Method in interface nxopen.geometricanalysis.DistanceAnalysisBuilder

Returns the spike length.

spikeLength() - Method in interface nxopen.geometricanalysis.RadiusAnalysisBuilder

Returns the spike length.

spikeLength() - Method in interface nxopen.geometricanalysis.SlopeAnalysisBuilder

Returns the spike length.

spikeLength - Variable in class nxopen.uf.UFDisp.SrfanlData

spill() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder

Returns the spill
License requirements: None.

spin() - Method in interface nxopen.blockstyler.DoubleTable

Returns the Spin
License requirements: None.

spin() - Method in interface nxopen.blockstyler.IntegerTable

Returns the Spin
License requirements: None.

SPINDLE - Static variable in class nxopen.cam.ConvertFromMCDBuilder.PocketLocationTypes

SPINDLE - Static variable in class nxopen.sim.KinematicAxisBuilder.AxisMotionType

spindle

SPINDLE_AXIS - Static variable in class nxopen.cam.TurnOrientWcs.XcMappingTypes

Map XC to ZM or XM of the MCS

SPINDLE_AXIS - Static variable in class nxopen.cam.TurnOrientWcs.YcMappingTypes

Map YC to ZM or XM of the MCS

SPINDLE_MARKER - Static variable in class nxopen.cam.ToolpathEventType

SPINDLE_MODE_LAST_ELEMENT - Static variable in class nxopen.uf.UFPath.SpindleMode

SPINDLE_MODE_RPM - Static variable in class nxopen.uf.UFPath.SpindleMode

SPINDLE_MODE_SFM - Static variable in class nxopen.uf.UFPath.SpindleMode

SPINDLE_MODE_SMM - Static variable in class nxopen.uf.UFPath.SpindleMode

SPINDLE_NC_AXIS - Static variable in class nxopen.sim.KinematicAxisBuilder.AxisMotionType

spindle NC-axis

SPINDLE_SPEED - Static variable in class nxopen.cam.FeedsBuilder.RecalcuateBasedOn

spindle speed

spindleBeforeEngage() - Method in interface nxopen.cam.Cycle

Returns the spindle before engage
License requirements: None.

spindleBeforeRetract() - Method in interface nxopen.cam.Cycle

Returns the spindle before retract
License requirements: None.

spindleDirectionAutomaticBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder

Returns the spindle_direction_automatic builder (inheritable Int)
License requirements: cam_base ("CAM BASE")
.

spindleDirectionBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder

Returns the spindle direction builder (inheritable Int)
License requirements: cam_base ("CAM BASE")
.

spindleEndPoint() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

Returns the end point of the spindle line, the other end point is the wheel point.

spindleFace() - Method in interface nxopen.cam.ConvertFromMCDBuilder

Returns the spindle face
License requirements: None.

spindleFileLocation() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

Returns the option to specify the location of the spindle file.

spindleFileName() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

Returns the name of the file containing the spindle definition.

spindleLines() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

Returns the selection list containing the spindle lines in all positions.

spindleLinesLayer() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

Returns the layer of the spindle lines.

spindleMaximumRpmBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder

Returns the spindle_maximum_rpm builder (inheritable Double)
License requirements: cam_base ("CAM BASE")
.

spindleMode() - Method in interface nxopen.cam.CycleSpindle

Returns the spindle type
License requirements: cam_base ("CAM BASE")
.

spindleModeBuilder() - Method in interface nxopen.cam.FeedsBuilder

Returns the spindle_mode builder (inheritable Int)
License requirements: cam_base ("CAM BASE")
.

spindleModeBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder

Returns the spindle_mode builder (inheritable Int)
License requirements: cam_base ("CAM BASE")
.

SpindleOn() - Constructor for class nxopen.uf.UFPath.SpindleOn

SpindleOn(double, double, String, UFPath.SpindleMode, UFPath.Direction, boolean, boolean, boolean) - Constructor for class nxopen.uf.UFPath.SpindleOn

spindlePresetRpmBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder

Returns the spindle_preset_rpm builder (inheritable Double)
License requirements: cam_base ("CAM BASE")
.

spindlePresetRpmToggleBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder

Returns the spindle_preset_rpm_toggle builder (inheritable Int)
License requirements: cam_base ("CAM BASE")
.

spindleRangeBuilder() - Method in interface nxopen.cam.FeedsBuilder

Returns the spindle_range builder (inheritable Text)
License requirements: cam_base ("CAM BASE")
.

spindleRangeBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder

Returns the spindle_range builder (inheritable Text)
License requirements: cam_base ("CAM BASE")
.

spindleRpmBuilder() - Method in interface nxopen.cam.FeedsBuilder

Returns the spindle_rpm builder (inheritable Double)
License requirements: cam_base ("CAM BASE")
.

spindleRpmBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder

Returns the spindle_rpm builder (inheritable Double)
License requirements: cam_base ("CAM BASE")
.

spindleRpmToggle() - Method in interface nxopen.cam.FeedsBuilder

Returns the spindle_rpm_toggle
License requirements: None.

spindleRpmToggleBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder

Returns the spindle_rpm_toggle builder (inheritable Int)
License requirements: cam_base ("CAM BASE")
.

spindleSliderBody() - Method in interface nxopen.tooling.SpindleSliderBuilder

Returns the spindle slider body
License requirements: None.

SpindleSliderBuilder - Interface in nxopen.tooling

Represents a Tooling.SpindleSliderBuilder to create a spindle slider
To create a new instance of this class, use AutoDieCollection.createSpindleSliderBuilder()

Created in NX10.0.2

spindleSliderName() - Method in interface nxopen.tooling.SpindleSliderBuilder

Returns the spindle slider name
License requirements: None.

spindleSliderVector() - Method in interface nxopen.tooling.SpindleSliderBuilder

Returns the direction spindle slider move along
License requirements: None.

spindleSpeed() - Method in interface nxopen.cam.CycleSpindle

Returns the spindle value
License requirements: cam_base ("CAM BASE")
.

spindleStop() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder

Returns the spindle stop
License requirements: None.

spindleTextBuilder() - Method in interface nxopen.cam.FeedsBuilder

Returns the spindle_text builder (inheritable Text)
License requirements: cam_base ("CAM BASE")
.

spindleTextBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder

Returns the spindle_text builder (inheritable Text)
License requirements: cam_base ("CAM BASE")
.

spine() - Method in interface nxopen.die.AddSurfBuilder

Returns the spine string, which determines the orientation of the sample planes
License requirements: None.

spine() - Method in interface nxopen.die.TrimLineDevelopmentBuilder

Returns the spine string, which determines the orientation of the sample planes
License requirements: None.

spine() - Method in interface nxopen.features.FaceBlendBuilder

Returns the spine for face blend
License requirements: None.

spine() - Method in interface nxopen.features.HelixBuilder

Returns the length spine
License requirements: None.

spine() - Method in interface nxopen.features.LawExtensionBuilder

Returns the spine.

SPINE - Static variable in class nxopen.features.NSidedSurfaceBuilder.UVOrientationType

spine orientation

spine() - Method in interface nxopen.features.SweptBuilder

Returns the spine (optional).

spine() - Method in interface nxopen.features.ThroughCurveMeshBuilder

Returns the spine.

spine() - Method in interface nxopen.geometricutilities.AlongSpineBuilder

Returns the Spine
License requirements: None.

spine() - Method in interface nxopen.geometricutilities.MultiTransitionLawBuilder

Returns the spine
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

spine() - Method in interface nxopen.geometricutilities.NonInflectingLawBuilder

Returns the Spine
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

spine() - Method in interface nxopen.geometricutilities.SShapedLawBuilder

Returns the Spine
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

SPINE - Static variable in class nxopen.MeshProfileString.Type

spine() - Method in interface nxopen.routing.RouteSweptTwistBuilder

Returns the spine
License requirements: routing_harness ("Routing Harness")
.

SPINE_CURVE - Static variable in class nxopen.features.AestheticFaceBlendBuilder.AlignmentType

Spine Curve option will align the sections based on a string of curves.

SPINE_CURVE - Static variable in class nxopen.geometricutilities.AlignmentMethodBuilder.Type

spineCurve() - Method in interface nxopen.features.NSidedSurfaceBuilder

Returns the spine curve.

spineCurve() - Method in interface nxopen.features.SectionSurfaceBuilder

Deprecated.

Deprecated in NX9.0.0. Use SectionSurfaceBuilderEx instead.

SpineCurve - Interface in nxopen.features

Represents a spine curve feature
To create or edit an instance of this class, use SpineCurveBuilder

Created in NX11.0.0

spineCurve() - Method in interface nxopen.features.StyledBlendBuilder

Returns the spine curve
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

SpineCurveBuilder - Interface in nxopen.features

Represents a Features.SpineCurve builder
To create a new instance of this class, use FreeformCurveCollection.createSpineCurveBuilder(nxopen.features.SpineCurve)
Default values.

SpineCurveBuilder.ArcSegmentsTypes - Class in nxopen.features

This enum represents the arc segments types

spineDefinition() - Method in interface nxopen.features.LawExtensionBuilderEx

Returns the spine definition
License requirements: None.

SpineDefinitionBuilder - Interface in nxopen.geometricutilities

Provides a spine definition for modeling operations .

SpineDefinitionBuilder.MethodOptions - Class in nxopen.geometricutilities

Options to define a spine

spineEndFlowDirection() - Method in interface nxopen.features.SectionSurfaceBuilderEx

Returns the spine end flow direction.

spineOption() - Method in interface nxopen.geometricutilities.AlongSpineBuilder

Returns the alongSpineOption.

SpinePlaneBuilder - Interface in nxopen.geometricutilities

Represents a SpinePlaneBuilder .

SpinePlaneBuilderList - Interface in nxopen.geometricutilities

Represents a list of objects.

SpinePointData - Interface in nxopen.geometricutilities

Represents a spine point def object
To create an instance of this class, see nxopen.GeometricUtilities#spinePointDataCollection

Created in NX5.0.0

spinePointData() - Method in interface nxopen.Part

Returns the SpinePointDataCollection instance belonging to this part .

SpinePointData.ParameterType - Class in nxopen.geometricutilities

Parameter type

SpinePointDataCollection - Interface in nxopen.geometricutilities

This class contains the factory methods for creating a SpinePointData object.

spinePointList() - Method in interface nxopen.geometricutilities.AlongSpineBuilder

Returns the list of spine points.

spineRadius() - Method in interface nxopen.die.AddSurfBuilder

Returns the spine radius, used by AddSurfBuilder.createDefaultSpine()
License requirements: None.

spineRadius() - Method in interface nxopen.die.TrimLineDevelopmentBuilder

Returns the spine radius, used by TrimLineDevelopmentBuilder.createDefaultSpine()
License requirements: None.

spineSection() - Method in interface nxopen.features.SectionSurfaceBuilderEx

Returns the spine section.

spineStartFlowDirection() - Method in interface nxopen.features.SectionSurfaceBuilderEx

Returns the spine start flow direction.

spineType() - Method in interface nxopen.features.SectionSurfaceBuilderEx

Returns the spine.

spineVector() - Method in interface nxopen.features.SectionSurfaceBuilderEx

Returns the spine vector.

SPINNING - Static variable in class nxopen.sim.KinematicComponentBuilder.SystemClass

Component defines spinning geometry

SPINNING_NON_SPINNING - Static variable in class nxopen.sim.SimDebugBuilder.TraceType

Trace Spinning Nonspinning

SPIRAL - Static variable in class nxopen.cam.CutPatternBuilder.Types

Spiral

SPIRAL - Static variable in class nxopen.cam.CylinderMillingBuilder.CutPatternTypes

Spiral

SPIRAL - Static variable in class nxopen.cam.SurfaceContourBuilder.DriveMethodTypes

Spiral

SPIRAL - Static variable in class nxopen.geometricutilities.PatternDefinition.PatternEnum

spiral pattern.

SPIRAL_HELIX - Static variable in class nxopen.cam.DPMItpBuilder.CutTypeOption

Spiral/helix cut type

SPIRAL_THICKNESS - Static variable in class nxopen.cam.CylinderMillingBuilder.DiameterForHelixTypes

Spiral Thickness

spiralDefinition() - Method in interface nxopen.geometricutilities.PatternDefinition

Returns the spiral definition.

spiralNormal() - Method in interface nxopen.geometricutilities.SpiralPattern

Returns the spiral normal vector
License requirements: None.

spiralOrientationOption() - Method in interface nxopen.geometricutilities.PatternOrientation

Returns the orientationOption for Spiral pattern type
License requirements: None.

SpiralPattern - Interface in nxopen.geometricutilities

the Spiral pattern definition.

SpiralPattern.OrientType - Class in nxopen.geometricutilities

This defines spiral direction method

SpiralPattern.SpiralDefineSize - Class in nxopen.geometricutilities

This defines size spiral type

spiralRadiusBuilder() - Method in interface nxopen.cam.DmSpiralBuilder

Returns the Spiral Radius
License requirements: None.

spiralStepoverBuilder() - Method in interface nxopen.cam.DmSpiralBuilder

Returns the Spiral Stepover builder
License requirements: None.

spiralStepoverDistance() - Method in interface nxopen.cam.DmSpiralBuilder

Returns the Stepover Distance.

spiralStepoverPercent() - Method in interface nxopen.cam.DmSpiralBuilder

Returns the Stepover Percent.

spiralThickness() - Method in interface nxopen.cam.CylinderMillingBuilder

Returns the Spiral Thickness
License requirements: None.

spl - Variable in class nxopen.uf.UFCurve.FixSplineData

SPLICE - Static variable in class nxopen.routing.electrical.ConnectorDevice.ComponentType

SPLICE - Static variable in class nxopen.routing.RouteManager.PartType

SPLINE - Static variable in class nxopen.cam.ArcOutputTypeCiBuilder.OutputTypes

splines

SPLINE - Static variable in class nxopen.cam.ArcOutputTypeCiBuilder.SplineArcOutputTypes

spline

SPLINE - Static variable in class nxopen.cam.ArcOutputTypeCiBuilder.SplineLineOutputTypes

spline

SPLINE - Static variable in class nxopen.DxfdwgCreator.ExportSplinesAsOptions

SPLINE - Static variable in class nxopen.Edge.EdgeType

Spline edge

SPLINE - Static variable in class nxopen.facet.FacetedEdge.FacetededgeType

Spline edge

SPLINE - Static variable in class nxopen.markup.Polyline.LineOption

Spline type

SPLINE - Static variable in class nxopen.mechatronics.PathConstraintFrameBuilder.CurveTypes

spline

SPLINE - Static variable in class nxopen.motion.ConnectorCoefficientTypes

spline type

SPLINE - Static variable in class nxopen.preferences.PartObject.ObjectType

Spline

SPLINE - Static variable in class nxopen.preferences.RoutingPath.CurveType

UF_ROUTE_AV_CURVES_SPLINES

spline() - Method in interface nxopen.routing.RouteSweptFoldBuilder

Returns the spline stored in the builder.

spline() - Method in interface nxopen.SketchG1Constraint

Returns the spline on which the G1 constraint is applied.

spline() - Method in interface nxopen.SketchG2Constraint

Returns the spline on which the G2 constraint is applied.

Spline - Interface in nxopen

Represents a spline curve.

Spline() - Constructor for class nxopen.uf.UFCurve.Spline

Spline(int, int, int, double[], double[][], double, double) - Constructor for class nxopen.uf.UFCurve.Spline

Spline() - Constructor for class nxopen.uf.UFEval.Spline

Spline(boolean, boolean, int, int, int) - Constructor for class nxopen.uf.UFEval.Spline

SPLINE_CRVATR_HAS_NO_SLOPE - Static variable in class nxopen.uf.UFConstants

SPLINE_CURVE - Static variable in class nxopen.motion.RoadBuilder.SurfaceDatatypeChoices

Spline Curve

SPLINE_CURVE - Static variable in class nxopen.positioning.ConstraintReference.GeometryType

Spline curve

SPLINE_CURVES - Static variable in class nxopen.motion.RoadBuilder.PathDatatypeChoices

Spline Curves

SPLINE_DATA - Static variable in class nxopen.positioning.Constraint.Type

A spline and its defining points

SPLINE_DEF_POINT_TYPE - Static variable in class nxopen.uf.UFDrf.ObjectAssocPointType

SPLINE_DEFINING_POINT - Static variable in class nxopen.Sketch.ConstraintPointType

A defining point of a spline.

SPLINE_DEFINING_POINT - Static variable in class nxopen.uf.UFSket.GeomVertex

SPLINE_EXCEED_MAX_CONSTRAINTS - Static variable in class nxopen.uf.UFConstants

SPLINE_EXCEEDS_MAX_ORDER - Static variable in class nxopen.uf.UFConstants

SPLINE_FEATURE - Static variable in class nxopen.uf.UFGdt.FeatureType

SPLINE_GEOM - Static variable in class nxopen.uf.UFBrep.GeomType

SPLINE_HASNO_DEFINEDATA - Static variable in class nxopen.uf.UFConstants

SPLINE_HASNO_INPUTDATA - Static variable in class nxopen.uf.UFConstants

SPLINE_INSUFF_DEG_FOR_CNSTRNS - Static variable in class nxopen.uf.UFConstants

SPLINE_INSUFF_POINTS - Static variable in class nxopen.uf.UFConstants

SPLINE_INVALID_POSITION - Static variable in class nxopen.uf.UFConstants

SPLINE_LENGTH - Static variable in class nxopen.positioning.Constraint.Type

Constrains the curve length of a spline

SPLINE_NON_ORTHO_SLP_CRVATR - Static variable in class nxopen.uf.UFConstants

SPLINE_NONINCREASING_PARAMS - Static variable in class nxopen.uf.UFConstants

SPLINE_NOT_CREATED - Static variable in class nxopen.uf.UFConstants

SPLINE_NOT_ENOUGH_CONSTRAINTS - Static variable in class nxopen.uf.UFConstants

SPLINE_POINTS - Static variable in class nxopen.features.PointSetBuilder.Types

Create points along spline.

SPLINE_POINTS - Static variable in class nxopen.features.ThroughCurveMeshBuilder.ConstructionMethod

Use the points and tangent values at the points for reparameterizing curves.

SPLINE_POINTS - Static variable in class nxopen.features.ThroughCurvesBuilder.ConstructionMethod

Use the points and tangent values at the points for reparameterizing curves.

SPLINE_POINTS - Static variable in class nxopen.geometricutilities.AlignmentMethodBuilder.Type

SPLINE_POLE - Static variable in class nxopen.Sketch.ConstraintPointType

The control pole of a spline

SPLINE_POLE - Static variable in class nxopen.uf.UFSket.GeomVertex

SPLINE_POLE_POINT_TYPE - Static variable in class nxopen.uf.UFDrf.ObjectAssocPointType

SPLINE_RECEDES_MIN_ORDER - Static variable in class nxopen.uf.UFConstants

SPLINE_SEGMENT - Static variable in class nxopen.SketchProjectBuilder.OutputCurve

spline segment output

SPLINE_SURFACE - Static variable in class nxopen.motion.RoadBuilder.SurfaceDatatypeChoices

Spline Surface

SPLINE_SURFACE - Static variable in class nxopen.positioning.ConstraintReference.GeometryType

Spline surface

splineArcOutputType() - Method in interface nxopen.cam.ArcOutputTypeCiBuilder

Returns the spline arc output type
License requirements: None.

SplineCollection - Interface in nxopen

Represents a collection of splines.

splineCollector() - Method in interface nxopen.features.PointSetBuilder

Returns the collector that is used to hold a spline.

splineCurve() - Method in interface nxopen.motion.RoadBuilder

Returns the spline curve of the road object of surface type
License requirements: mechanisms ("MECHANISMS")
.

splineData - Variable in class nxopen.uf.UFCurve.SmoothSplineData

splineData - Variable in class nxopen.uf.UFCurve.SmoothSplineDataStData

SplineData() - Constructor for class nxopen.uf.UFSo.SplineData

SplineData(int, int, int, int, int[], Tag[], double[], Tag[], Tag[], Tag[], int[]) - Constructor for class nxopen.uf.UFSo.SplineData

splineDefaultActionType() - Method in interface nxopen.preferences.SessionModeling

Returns the value indicating the default action for a spline.

splineDefiningPointIndex - Variable in class nxopen.Sketch.ConstraintGeometry

Ignored unless PointType is SplineDefiningPoint.

SplineExtensionBuilder - Interface in nxopen.geometricutilities

Spline extension builder class.

SplineExtensionBuilder.ExtensionOption - Class in nxopen.geometricutilities

Spline extension options

splineFitTolerance() - Method in interface nxopen.cam.ArcOutputTypeCiBuilder

Returns the spline fit tolerance
License requirements: None.

splineFitToleranceType() - Method in interface nxopen.cam.ArcOutputTypeCiBuilder

Returns the spline fit tolerance type
License requirements: None.

splineId - Variable in class nxopen.uf.UFModlGeneral.CreateSplineData

splineLineOutputType() - Method in interface nxopen.cam.ArcOutputTypeCiBuilder

Returns the spline line output type
License requirements: None.

splineMethod() - Method in interface nxopen.features.StudioSplineBuilder

Deprecated.

Deprecated in NX8.0.0. Use StudioSplineBuilderEx instead.

splineOptions - Variable in class nxopen.routing.HealPath.AllData

SplineOptions - Class in nxopen.routing

Different spline creation options.

SplinePathBuilder - Interface in nxopen.routing

Builder for creating a D-Cubed constrained spline.

SplinePathBuilder.ExtensionDataForPointAtIndexData - Class in nxopen.routing

This class holds the data returned from SplinePathBuilder.getExtensionDataForPointAtIndex(int)

SplinePathBuilder.IsLengthLockedData - Class in nxopen.routing

This class holds the data returned from SplinePathBuilder.isLengthLocked()

SplinePathBuilder.IsSplineSlackedData - Class in nxopen.routing

This class holds the data returned from SplinePathBuilder.isSplineSlacked()

SplinePathBuilder.OffsetData - Class in nxopen.routing

This class holds the data returned from SplinePathBuilder.getOffsetData(int)

SplinePathBuilder.SplinePathAttributeOptions - Class in nxopen.routing

Describes user attribute methods options These value are used to set minimum checking method.

SplinePathBuilder.SplinePathSlackType - Class in nxopen.routing

Describes the method the spline is defined as.

SplinePathBuilder.StartAndEndRcpData - Class in nxopen.routing

This class holds the data returned from SplinePathBuilder.getStartAndEndRcp()

splinePointsBy() - Method in interface nxopen.features.PointSetBuilder

Returns the spline points definition setting.

splinePointsType() - Method in interface nxopen.positioning.Constraint

Returns the type of the spline.

splinePrefix - Variable in class nxopen.uf.UFSket.AskPreferencesData

splinePts - Variable in class nxopen.uf.UFModlFeatures.AskCurveMesh1Data

splinePts - Variable in class nxopen.uf.UFModlFeatures.AskCurveMeshData

splines() - Method in interface nxopen.BasePart

Returns the SplineCollection instance belonging to this part .

SPLINES - Static variable in class nxopen.DxfdwgImporter.ImportPolylinesAs

import polylines as splines

SplineSegment - Interface in nxopen.routing

Represents a spline segment.

SplineSegmentCollection - Interface in nxopen.routing

Represents a collection of SplineSegment objects.

splinesegments - Variable in class nxopen.routing.RouteManager.ConvertSplineSegmentsData

The converted spline segments.

splineSegments() - Method in interface nxopen.routing.SegmentManager

Spline Segment collection .

SplineSettingsData() - Constructor for class nxopen.routing.SubdivideSegmentBuilder.SplineSettingsData

SplineSettingValuesData() - Constructor for class nxopen.routing.SubdivideSegmentBuilder.SplineSettingValuesData

splineTag - Variable in class nxopen.uf.UFCurve.CreateSplineData

SPLIT - Static variable in class nxopen.cam.CutParametersFilletsTypes

Fillets mode: Split

SPLIT - Static variable in class nxopen.features.shipdesign.StiffenerBuilder.KnuckleOptions

Split the stiffener at knuckle points

SPLIT - Static variable in class nxopen.tooling.DieBaseBuilder.DesignToolOption

split sub die base

SPLIT - Static variable in class nxopen.tooling.ScrapDesignBuilder.EditScrapType

Splits a scrap by selected curves

SPLIT - Static variable in class nxopen.tooling.SplitSolidBuilder.OperationType

split option

split() - Method in interface nxopen.weld.WeldFillStripBuilder

Splits the fill strip at the center and creates a new strip.

split() - Method in interface nxopen.weld.WeldJointBuilder

Splits all joints set by WeldJointBuilder.joint() defined by WeldJointBuilder.SplitTypes .

SPLIT_AND_ATTACH - Static variable in class nxopen.cae.AttachElementsBuilder.AttachOption

split and attach

SPLIT_BODY - Static variable in class nxopen.tooling.MWDefineSheetsBuilder.Types

SPLIT_BY_DIMENSION_LINE - Static variable in class nxopen.annotations.TextOrientation

Specifies dimenson text split by the dimension line

SPLIT_BY_LINE - Static variable in class nxopen.cae.ElementSplitBuilder.Types

Split by line

SPLIT_HORIZONTALLY - Static variable in class nxopen.routing.Division.SplitDirectionType

Creates a horizontal split

SPLIT_HORIZONTALLY - Static variable in class nxopen.routing.DivisionsBuilder.SplitDirectionType

Creates a horizontal split

SPLIT_ONLY - Static variable in class nxopen.cae.AttachElementsBuilder.AttachOption

split only

SPLIT_VERTICALLY - Static variable in class nxopen.routing.Division.SplitDirectionType

Creates a vertical split

SPLIT_VERTICALLY - Static variable in class nxopen.routing.DivisionsBuilder.SplitDirectionType

Creates a vertical split

splitAlongGuide() - Method in interface nxopen.features.SectionSurfaceBuilderEx

Returns whether the section surface should be segmented based on the input strings and constraint faces to create a multi-segment surface output.

splitAngle() - Method in interface nxopen.weld.WeldJointBuilder

Returns the split angle to divide a joint when using WeldJointBuilder.SplitTypes.ANGLE .

splitBodies - Variable in class nxopen.uf.UFModeling.SplitBodyData

splitBodies - Variable in class nxopen.uf.UFModeling.SplitBodyRetainToolData

SplitBody - Interface in nxopen.features

Represents a split body feature.

splitBody(int, Tag[], Tag) - Method in interface nxopen.uf.UFModeling

Refer to UF_MODL_split_body for documentation.

SplitBodyBuilder - Interface in nxopen.features

Represents a SplitBody builder.

SplitBodyData() - Constructor for class nxopen.uf.UFModeling.SplitBodyData

splitBodyRetainTool(int, Tag[], Tag) - Method in interface nxopen.uf.UFModeling

Refer to UF_MODL_split_body_retain_tool for documentation.

SplitBodyRetainToolData() - Constructor for class nxopen.uf.UFModeling.SplitBodyRetainToolData

SplitBuilder - Interface in nxopen.mechanicalrouting

the Builder to Assign Discontinuity for the stocks
To create a new instance of this class, use nxopen.MechanicalRouting.BuilderFactory#createSplitBuilder

Created in NX11.0.0

splitCurve() - Method in interface nxopen.tooling.ScrapDesignBuilder

Returns the splitting curve
License requirements: None.

splitCurveOption() - Method in interface nxopen.features.AOCSBuilder

Returns the split curve at face boundary option .

splitCurveParams - Variable in class nxopen.uf.UFModl.StycornerData

splitDirection() - Method in interface nxopen.routing.Division

Returns the direction of split, either vertical or horizontal
License requirements: routing_hvac ("Routing HVAC")
.

splitDirection() - Method in interface nxopen.routing.DivisionsBuilder

Returns the direction of split, either vertical or horizontal
License requirements: routing_hvac ("Routing HVAC")
.

splitDirectionOption() - Method in interface nxopen.features.shipdesign.ShipTrimBodyBuilder

Returns the split direction method being used to construct the splitting sheet body.

splitDirectionOption() - Method in interface nxopen.features.shipdesign.SplitProfilePlateBuilder

Returns the option to split profile/plate along tool face or perpendicular to profile/plate molding face.

SplitDuctBuilder - Interface in nxopen.routing

Represents a SplitDuctBuilder Builder for creating/editing splits at an end of a duct.

SplitDuctBuilder.FlowTypes - Class in nxopen.routing

The type of flow, whether Absolute or Relative, to be displayed in the %Flow column in the list.

splitFeatureGroup() - Method in interface nxopen.features.shipdesign.RemoveSplitBuilder

Returns the split feature group.

splitGap() - Method in interface nxopen.tooling.DieBaseBuilder

Returns the split gap value.

splitKnuckleEdges() - Method in interface nxopen.features.shipdesign.PlateBuilder

Returns the split knuckle edges, which are used to split a plate into separate knuckle parts.

splitKnuckleEdges() - Method in interface nxopen.features.shipdesign.PlateSystemBuilder

Returns the split knuckle edges, which are used to create seam feature to split a plate system into plate subsystem.

splitLength() - Method in interface nxopen.weld.WeldJointBuilder

Returns the segment length when using WeldJointBuilder.SplitTypes.SKIP .

splitLineType() - Method in interface nxopen.cae.AttachElementsBuilder

Returns a split line option
License requirements: None.

splitMass() - Method in interface nxopen.cae.SolidPropertyCheckBuilder

Returns the output mass split option option
License requirements: None.

splitMethod() - Method in interface nxopen.cae.ElementSplitBuilder

Returns the use existing connectivity option
License requirements: nx_masterfem ("Finite Element Modeling")
.

splitMethod() - Method in interface nxopen.cae.OneDimensionalElementSplitBuilder

Returns the split method type
License requirements: None.

splitObject() - Method in interface nxopen.routing.SplitRunBuilder

Returns the user selected split object
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

splitObject() - Method in interface nxopen.tooling.SplitSolidBuilder

Returns the tool object to split the target body.

splitOffset() - Method in interface nxopen.features.WrapGeometryBuilder

Returns the Offset applied to both sides of the splitting planes.

splitOffset() - Method in interface nxopen.sim.SinumerikCaSimplifyBodiesBuilder

Returns the Offset applied to both sides of the splitting planes.

splitOffset - Variable in class nxopen.uf.UFModl.WrapAssem

splitOffset - Variable in class nxopen.uf.UFModl.WrapGeom

splitOption() - Method in interface nxopen.weld.WeldJointBuilder

Returns the method used to split the joint
License requirements: None.

splitOutputAlongBoundaryCurves() - Method in interface nxopen.features.StudioSurfaceBuilder

Returns the split output along boundary curves option
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.

splitPlane() - Method in interface nxopen.tooling.SplitSolidBuilder

Returns the plane to be a split tool.

splitPoorQuads - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms

SplitProfilePlateBuilder - Interface in nxopen.features.shipdesign

Represents a SplitProfilePlateBuilder .This class is for splitting ship profile/plate solidbodies
To create a new instance of this class, use ShipCollection.createSplitProfilePlateBuilder()
Default values.

SplitProfilePlateBuilder.ProfileType - Class in nxopen.features.shipdesign

Represents the target body type.

SplitProfilePlateBuilder.SplitDirectionOptionType - Class in nxopen.features.shipdesign

Represents split direction to trim profile or plate solid body .

SplitProfilePlateBuilder.ToolOptionType - Class in nxopen.features.shipdesign

Represents trim tool type to trim profile or plate solid body.

splitReinforcement() - Method in interface nxopen.features.shipdesign.SplitStandardPartBuilder

Returns the flag to indicate whether to split the reinforcement part on the standard part.

splitRunBuilder(Run) - Method in interface nxopen.routing.RouteManager

Creates a SplitRunBuilder that can split a run.

SplitRunBuilder - Interface in nxopen.routing

Builder Class for Split Run Object
To create a new instance of this class, use RouteManager.splitRunBuilder(nxopen.routing.Run)
Default values.

splits - Variable in class nxopen.uf.UFModl.WrapAssem

splits - Variable in class nxopen.uf.UFModl.WrapGeom

splitScrap() - Method in interface nxopen.tooling.ScrapDesignBuilder

Returns the scrap to be splitted or merged
License requirements: None.

splitSegment() - Method in interface nxopen.features.GuidedExtensionBuilderEx

Splits the selected segment into multiple segments by placing guide lines at end points of the edges for the selected segment.

splitSegment() - Method in interface nxopen.tooling.GuidedExtensionBuilder

Splits the selected segment into multiple segments by placing guide lines at end points of the edges for the selected segment.

splitSize() - Method in interface nxopen.cae.AttachElementsBuilder

Returns the split size
License requirements: None.

SplitSolidBuilder - Interface in nxopen.tooling

Represents a builder to be used to split a solid with geometry tools.

SplitSolidBuilder.OperationType - Class in nxopen.tooling

the split operation type: split, trim.

SplitSolidBuilder.ToolObjectOption - Class in nxopen.tooling

the split tool selection type: Existing Object, New Plane.

SplitSolidCollection - Interface in nxopen.tooling

Creates SplitSolid builder collection
To obtain an instance of this class, refer to ToolingManager

Created in NX7.0.0

splitSolids() - Method in interface nxopen.tooling.ToolingManager

Returns the SplitSolidCollection instance belonging to this part .

SplitStandardPart - Interface in nxopen.features.shipdesign

Represents a split standard part feature.

SplitStandardPartBuilder - Interface in nxopen.features.shipdesign

Represents a SplitStandardPartBuilder .This class is for splitting ship standard part
To create a new instance of this class, use ShipCollection.createSplitStandardPartBuilder(nxopen.features.shipdesign.SplitStandardPart)
Default values.

SplitStandardPartBuilder.ToolTypes - Class in nxopen.features.shipdesign

Represents the split tool types.

SplitSubdivisionBodyBuilder - Interface in nxopen.features.subdivision

Represents a Features.Subdivision.SplitSubdivisionBodyBuilder builder.

SplitSubdivisionBodyBuilder.InputBodyOptions - Class in nxopen.features.subdivision

Options indicating actions to be taken on input Features.Subdivision.SubdivisionBody features

SplitSubopCommand - Interface in nxopen.cam

Represents an Split Subop Command Builder .

SplitSubopCommand.LinePlaneTypes - Class in nxopen.cam

Available line plane types

SplitSubopCommand.Types - Class in nxopen.cam

Available split types

splitSubSingle() - Method in interface nxopen.tooling.DieBaseBuilder

Returns the split options: whole sub die base or single plate.

splitTarget() - Method in interface nxopen.tooling.SplitSolidBuilder

Returns the target body to be split.

Splitter - Interface in nxopen.cam

Represents a Splitter Builder
To create a new instance of this class, use MultiBladeSplittersGeometry.createSplitter(nxopen.NXObject[], nxopen.NXObject[])

Created in NX7.0.0

SPLITTER_FIVE - Static variable in class nxopen.cam.BladeFinishGeom.Types

Splitter 5

SPLITTER_FOUR - Static variable in class nxopen.cam.BladeFinishGeom.Types

Splitter 4

SPLITTER_ONE - Static variable in class nxopen.cam.BladeFinishGeom.Types

Splitter 1

SPLITTER_THREE - Static variable in class nxopen.cam.BladeFinishGeom.Types

Splitter 3

SPLITTER_TWO - Static variable in class nxopen.cam.BladeFinishGeom.Types

Splitter 2

splitterAngle() - Method in interface nxopen.cam.ToolAxisAdvanced

Returns the splitter angle
License requirements: None.

splitterColor() - Method in interface nxopen.cam.Preferences

Returns the splitter color
License requirements: None.

splitterList() - Method in interface nxopen.cam.MultiBladeSplittersGeometry

Returns the splitter list builder
License requirements: None.

SplitterList - Interface in nxopen.cam

Represents a list of objects.

splittersGeometry() - Method in interface nxopen.cam.GeometryCiBuilder

Returns the splitters geometry
License requirements: cam_base ("CAM BASE")
.

splittingSheets() - Method in interface nxopen.tooling.MWDefineSheetsBuilder

Returns the sheets for splitting the subtracted workpiece
License requirements: None.

splitToolPaths(CAMObject[], ToolPathSplitBuilder) - Method in interface nxopen.cam.CAMSetup

Tool Path Split by Holder
License requirements: cam_base ("CAM BASE")
.

splitType() - Method in interface nxopen.cam.ToolPathSplitBuilder

Returns the type of split (by tranfer or collision)
License requirements: None.

splitType() - Method in interface nxopen.cam.ToolPathSplitParametersBuilder

Returns the type of split (by tranfer or collision)
License requirements: None.

splitXforms - Variable in class nxopen.uf.UFModl.WrapAssem

SPOT - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSymbolType

SPOT - Static variable in class nxopen.annotations.Symbol

Specifies spot weld symbol

SPOT - Static variable in class nxopen.LightType

A spot light is the same as a point light, except that it is constrained by a cone shape.

SPOT - Static variable in class nxopen.routing.OverstockBuilder.WrapType

Spot

SPOT - Static variable in class nxopen.routing.WrapApplicationType

Spot wrap application, i.e., 100% overlap

SPOT_LIGHT - Static variable in class nxopen.uf.UFView.LightType

SPOT_NA_TYPE - Static variable in class nxopen.uf.UFWeld.Types

SPOT_TYPE - Static variable in class nxopen.uf.UFWeld.Types

SPOT_WELD - Static variable in class nxopen.cae.connections.ConnectionType

SpotWeld

SPOT_WELD - Static variable in class nxopen.uf.UFConstants

SPOT_WELD_NON_ASSOC - Static variable in class nxopen.uf.UFConstants

SPOT_WELD_NON_ASSOCIATIVE - Static variable in class nxopen.uf.UFConstants

SPOT_WELD_NUT - Static variable in class nxopen.uf.UFDisp.PolyMarker

SPOT_WELD_STUD - Static variable in class nxopen.uf.UFDisp.PolyMarker

spotCount - Variable in class nxopen.uf.UFWeld.AskSpotFaceData

spotCount - Variable in class nxopen.uf.UFWeld.AskSpotFaceInfoData

SpotData() - Constructor for class nxopen.uf.UFWeld.SpotData

SpotData(Tag, UFWeld.SpotFaceLoc) - Constructor for class nxopen.uf.UFWeld.SpotData

SpotFaceLoc() - Constructor for class nxopen.uf.UFWeld.SpotFaceLoc

SpotFaceLoc(Tag, double[], double[], String) - Constructor for class nxopen.uf.UFWeld.SpotFaceLoc

SpotFaceLocation() - Constructor for class nxopen.uf.UFWeld.SpotFaceLocation

SpotFaceLocation(Tag, double[], double[]) - Constructor for class nxopen.uf.UFWeld.SpotFaceLocation

spotInfo - Variable in class nxopen.uf.UFWeld.AskSpotFaceData

spotInfo - Variable in class nxopen.uf.UFWeld.AskSpotFaceInfoData

SpotInfo() - Constructor for class nxopen.uf.UFWeld.SpotInfo

SpotInfo(Tag, UFWeld.SpotFaceLocation) - Constructor for class nxopen.uf.UFWeld.SpotInfo

spotPoint - Variable in class nxopen.uf.UFWeld.SpotData

spotPoint - Variable in class nxopen.uf.UFWeld.SpotInfo

SpotWeld - Interface in nxopen.cae.connections

Spot Weld connection.

SPRD_FILE_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId

SPRD_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId

sprDmpType - Variable in class nxopen.uf.UFMotion.SpringDamper

SPRDNT_FILE_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId

SPRDNT_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId

SPREADSHEET - Static variable in class nxopen.cae.LaminateViewDrapingResultsBuilder.OuputChoice

spreadsheet() - Method in interface nxopen.features.shipdesign.AlongGuideCutBuilder

Returns the spreadsheet builder, SteelFeatureSpreadsheetBuilder , which defines the along guide cut cross section type and parameters.

spreadsheet() - Method in interface nxopen.features.shipdesign.CornerCutBuilder

Returns the spreadsheet builder.

spreadsheet() - Method in interface nxopen.features.shipdesign.ProfileTransitionBuilder

Returns the spreadsheet builder.

SPREADSHEET - Static variable in class nxopen.features.shipdesign.ShipIntersectionsBuilder.CreationType

SPREADSHEET - Static variable in class nxopen.features.shipdesign.ShipSectionBuilder.Type

spreadsheet() - Method in interface nxopen.features.shipdesign.WeldCut2Builder

Returns the spreadsheet builder.

SPREADSHEET - Static variable in class nxopen.motion.GraphBuilder.PlotStyleChoices

Deprecated.

To Spreadsheet

SPREADSHEET - Static variable in class nxopen.motion.MotionSolutionBuilder.SolutionTypes

Spreadsheet run

Spreadsheet - Interface in nxopen

Represents a class for internal spreadsheet.

SPREADSHEET - Static variable in class nxopen.Validation.InputType

Input rules are from a spreadsheet

SpreadsheetCellData - Interface in nxopen

Represents a class for Spreadsheet cell data.

SpreadsheetCellData.Types - Class in nxopen

Data types enum

SpreadsheetData - Interface in nxopen.tooling

Represents the spreadsheet data which could be standalone spreadsheet file with special format or be the spreadsheet data from part family template part, the latter format will not have any other data except the name and value in class SpreadsheetDataParameter , that means it might not return any result in some methods such as "GetDefinedAttributesExpressions".

SpreadsheetData.DefinedAttributesExpressionsData - Class in nxopen.tooling

This class holds the data returned from SpreadsheetData.getDefinedAttributesExpressions(nxopen.tooling.SpreadsheetData.KeywordType)

SpreadsheetData.KeywordType - Class in nxopen.tooling

Represents the different attribute or expression section in spreadsheet

SpreadsheetData.ParameterStatus - Class in nxopen.tooling

Represents the different spreadsheet parameter status

SpreadsheetDataParameter - Interface in nxopen.tooling

Represents parameter in the spreadsheet.

SpreadsheetDataParameter.Status - Class in nxopen.tooling

Represents the different spreadsheet parameter status

SpreadsheetExternal - Interface in nxopen

Represents a class for external spreadsheet.

spreadSheetFile() - Method in interface nxopen.features.shipdesign.QualifySketchBuilder

Returns the parameter spreadsheet file.

spreadSheetFileName() - Method in interface nxopen.features.vehicledesign.BaseDataImportExportBuilder

Returns the spreadsheet name which indicates the spreadsheet to be imported or exported.

spreadsheetItemID() - Method in interface nxopen.features.vehicledesign.BaseDataImportExportBuilder

Returns the item ID number which indicates the item that the spreadsheet is to be imported from or exported to.

spreadsheetItemName() - Method in interface nxopen.features.vehicledesign.BaseDataImportExportBuilder

Returns the item name of the spreadsheet in Teamcenter.

spreadsheetItemRevision() - Method in interface nxopen.features.vehicledesign.BaseDataImportExportBuilder

Returns the item revision of the spreadsheet that is to be imported from or exported to.

spreadsheetManager() - Method in interface nxopen.Session

Returns the SpreadsheetManager belonging to this session
Created in NX11.0.0

SpreadsheetManager - Interface in nxopen

Represents a class for interacting with spreadsheets.

SpreadsheetManager.LookupMode - Class in nxopen

Modes of lookup in the table.

SpreadsheetManager.OpenMode - Class in nxopen

Sheet types to open spreadsheet.

SpreadsheetManager.Sheettype - Class in nxopen

Sheet types to open spreadsheet.

spreadSheetPath() - Method in interface nxopen.features.shipdesign.QualifySketchBuilder

Returns the parameter spreadsheet path.

SpreadsheetRunControl - Interface in nxopen.motion

Represents the SpreadsheetRunControl
An instance of this class can not be obtained

Created in NX9.0.0

spreadsheetRunFromFile(String, int, int, boolean) - Method in interface nxopen.uf.UFMotion

Refer to UF_MOTION_spreadsheet_run_from_file for documentation.

sPrim - Variable in class nxopen.uf.UFModlFeatures.AskCurveMesh1Data

sPrim - Variable in class nxopen.uf.UFModlFeatures.AskCurveMeshData

spring() - Method in interface nxopen.cae.BoltBuilder

Returns the option to use a spring element to connect the head to the tap surface
License requirements: None.

Spring - Interface in nxopen.motion

Represents a spring
To create or edit an instance of this class, use SpringBuilder

Created in NX6.0.0

SPRING - Static variable in class nxopen.uf.UFSf.ElementType

SPRING_DASHPOT_FORCE - Static variable in class nxopen.cae.Result.Component

No longer used; it means Result.Component.SPRING_DASHPOT_FORCE_X in new format

SPRING_DASHPOT_FORCE_X - Static variable in class nxopen.cae.Result.Component

SPRING_DASHPOT_FORCE_Y - Static variable in class nxopen.cae.Result.Component

SPRING_DASHPOT_FORCE_Z - Static variable in class nxopen.cae.Result.Component

SPRING_DASHPOT_MOMENT_X - Static variable in class nxopen.cae.Result.Component

SPRING_DASHPOT_MOMENT_Y - Static variable in class nxopen.cae.Result.Component

SPRING_DASHPOT_MOMENT_Z - Static variable in class nxopen.cae.Result.Component

SPRING_DASHPOT_RESULTANT - Static variable in class nxopen.cae.Result.Quantity

SPRING_DASHPOT_RESULTANTS_LEVEL_CROSSING_RATE - Static variable in class nxopen.cae.Result.Quantity

SPRING_DASHPOT_STRAIN_RESULTANT - Static variable in class nxopen.cae.Result.Quantity

SPRING_DASHPOT_STRAIN_RESULTANTS_LEVEL_CROSSING_RATE - Static variable in class nxopen.cae.Result.Quantity

SPRING_SPRING_GREEN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

SPRING_SPRING_YELLOW_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

springbackAngle() - Method in interface nxopen.die.FlangeTaskBuilder

Returns the springback angle of the flange task
License requirements: die_engineering ("DIE ENGINEERING")
.

SpringbackCompensation - Interface in nxopen.die

Represents a springback compensation feature.

SpringbackCompensationBuilder - Interface in nxopen.die

Used to create or edit a SpringbackCompensation feature.

SpringbackCompensationBuilder.DefinedByType - Class in nxopen.die

The type of input data that defines the compensation.

SpringbackCompensationBuilder.DegreeType - Class in nxopen.die

The polynomial degree type.

SpringbackCompensationBuilder.ResultSheetType - Class in nxopen.die

The type of sheet body you would like created as output.

springbackMethod() - Method in interface nxopen.tooling.DieEngStampingOutputBuilder

Returns the springback method
License requirements: None.

springbackType() - Method in interface nxopen.die.FlangeTaskBuilder

Returns the springback type of the flange task
License requirements: die_engineering ("DIE ENGINEERING")
.

SpringBuilder - Interface in nxopen.motion

Represents a SpringBuilder
To create a new instance of this class, use SpringCollection.createSpringBuilder(nxopen.motion.Spring)
Default values.

SpringCollection - Interface in nxopen.motion

Represents a collection of motion spring
To obtain an instance of this class, refer to MotionManager

Created in NX6.0.0

springConstant() - Method in interface nxopen.mechatronics.AngularSpringJointBuilder

Returns the spring constant.

springConstant() - Method in interface nxopen.mechatronics.LinearSpringJointBuilder

Returns the spring constant.

springConstant() - Method in interface nxopen.mechatronics.SpringDamperBuilder

Returns the spring constant.

SpringDamper - Interface in nxopen.mechatronics

Represents the Spring Damper.

SpringDamper() - Constructor for class nxopen.uf.UFMotion.SpringDamper

SpringDamper(String, UFMotion.SpringDamperType, Tag, Tag, Tag, double[], Tag, Tag, double[], double, double, double, double, double, double) - Constructor for class nxopen.uf.UFMotion.SpringDamper

SpringDamperBuilder - Interface in nxopen.mechatronics

Represents a SpringDamper builder.

SpringDamperBuilder.AxisJointType - Class in nxopen.mechatronics

the Axis Joint types.

SpringDamperCollection - Interface in nxopen.mechatronics

Represents a collection of Spring Damper.

springDampers() - Method in interface nxopen.mechatronics.PhysicsManager

Returns the SpringDamperCollection belonging to this part
Created in NX10.0.0

SpringEADBuilder - Interface in nxopen.cae

This class provides Spring Associated Data Support
To create a new instance of this class, use NodeElementManager.createSpringEadBuilder()
Default values.

SpringEADBuilder.State - Class in nxopen.cae

indicates to apply or clear the stiffness property upon commit

springForceMultiplier() - Method in interface nxopen.mechatronics.PreferencesBuilder

Deprecated.

Deprecated in NX9.0.0. Use PreferencesBuilder.springForceMultiplierExpression() instead

springForceMultiplierExpression() - Method in interface nxopen.mechatronics.PreferencesBuilder

Returns the Spring Force Multiplier Expression
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

springInitLength - Variable in class nxopen.uf.UFMotion.SpringDamper

SpringPasses - Interface in nxopen.cam

Represents a spring passes .

springPasses() - Method in interface nxopen.cam.ThreadMillingBuilder

Returns the spring passes
License requirements: None.

springPasses() - Method in interface nxopen.cam.TurnCutParameters

Returns the spring passes
License requirements: None.

SpringPasses.Types - Class in nxopen.cam

the alternate spring passes options .

springPeriod(double, double) - Method in interface nxopen.EngineeringFunction

Calculate the period in the spring-mass system.

springPotentialEnergy(double, double) - Method in interface nxopen.EngineeringFunction

Calculate the potential energy in the spring-mass system.

springPreload - Variable in class nxopen.uf.UFMotion.SpringDamper

springRate - Variable in class nxopen.uf.UFMotion.SpringDamper

springRefAngle - Variable in class nxopen.uf.UFMotion.SpringDamper

springRefLength - Variable in class nxopen.uf.UFMotion.SpringDamper

springRestoringForce(double, double) - Method in interface nxopen.EngineeringFunction

Calculate the restoring force in the spring-mass system.

springs() - Method in interface nxopen.motion.MotionManager

Returns the SpringCollection belonging to this part
Created in NX3.0.0

SPRSHT_FILE_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId

SPRSHT_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId

SPRUNG - Static variable in class nxopen.die.SpringbackCompensationBuilder.ResultSheetType

Sprung sheet body.

sprungFacets() - Method in interface nxopen.die.SpringbackCompensationBuilder

Returns the sprung facets.

sprungPointsFile() - Method in interface nxopen.die.SpringbackCompensationBuilder

Returns the sprung points file name.

SpunOutlineGeom - Interface in nxopen.cam

Represents a spun outline geometry object for turning boundary .

SpunOutlineGeom.CreationTypes - Class in nxopen.cam

the creation methods

SpunOutlineGeom.PlanesAtAnglesData - Class in nxopen.cam

This class holds the data returned from SpunOutlineGeom.getPlanesAtAngles()

SpunOutlineGeom.PlanesThroughPointsData - Class in nxopen.cam

This class holds the data returned from SpunOutlineGeom.getPlanesThroughPoints()

SPUR_GEAR_TYPE - Static variable in class nxopen.uf.UFPd.AttributeType

spurGearAddendum(double) - Method in interface nxopen.EngineeringFunction

Calculate the addendum from the module.

spurGearAngularBacklash(double, double) - Method in interface nxopen.EngineeringFunction

Calculate the angular backlash from linear backlash along pitch circle.

spurGearBaseCircleDiameter(double, double) - Method in interface nxopen.EngineeringFunction

Calculate the base circle diameter from the pitch diameter and pressure angle.

spurGearBasePitch(double, double) - Method in interface nxopen.EngineeringFunction

Calculate the base pitch from the module and pressure angle.

spurGearCenterDistance(double, double, double) - Method in interface nxopen.EngineeringFunction

Calculate the center distance from the module and number of teeth.

spurGearCircularPitch1(double) - Method in interface nxopen.EngineeringFunction

Calculate the circular pitch from module.

spurGearCircularPitch2(double, double) - Method in interface nxopen.EngineeringFunction

Calculate the circular pitch from the pitch diameter and number of teeth.

spurGearContactRatio(double, double, double, double, double, double, double) - Method in interface nxopen.EngineeringFunction

Calculate the contact ratio from outside radii, base-circle radii, center distance and pressure angle.

spurGearDedendum(double) - Method in interface nxopen.EngineeringFunction

Calculate the dedendum from the module.

spurGearLinearBacklash1(double, double) - Method in interface nxopen.EngineeringFunction

Calculate the linear backlash along pitch circle from change in center distance and pressure angle.

spurGearLinearBacklash2(double) - Method in interface nxopen.EngineeringFunction

Calculate the linear backlash along pitch circle from change in tooth thickness.

spurGearLinearBacklash3(double, double) - Method in interface nxopen.EngineeringFunction

Calculate the linear backlash along line of action from linear backlash along pitch circle.

spurGearMinimumNumberNoUndercutting(double) - Method in interface nxopen.EngineeringFunction

Calculate the min. number teeth for no undercutting from pressure angle.

spurGearModule(double) - Method in interface nxopen.EngineeringFunction

Calculate the module from the diametral pitch.

spurGearNumberOfTeeth(double, double) - Method in interface nxopen.EngineeringFunction

Calculate the number of teeth from the module and pitch diameter.

spurGearOutsideDiameter1(double, double) - Method in interface nxopen.EngineeringFunction

Calculate the outside diameter from the module and pitch diameter.

spurGearOutsideDiameter2(double, double) - Method in interface nxopen.EngineeringFunction

Calculate the outside diameter from the module and number of teeth.

spurGearPitchDiameter(double, double) - Method in interface nxopen.EngineeringFunction

Calculate the pitch diameter from module.

spurGearRootDiameter(double, double) - Method in interface nxopen.EngineeringFunction

Calculate the root diameter from pitch diameter and module.

spurGearToothThickness(double) - Method in interface nxopen.EngineeringFunction

Calculate the tooth thickness at standard pitch diameter from module.

SQUARE - Static variable in class nxopen.annotations.FeatureControlFrameDataBuilder.AreaSymbolType

Square

SQUARE - Static variable in class nxopen.annotations.FeatureControlFrameDataBuilder.ToleranceZoneShape

square

SQUARE - Static variable in class nxopen.annotations.IdSymbolBuilder.SymbolTypes

Square

SQUARE - Static variable in class nxopen.annotations.LeaderData.ArrowheadType

Square symbol

SQUARE - Static variable in class nxopen.annotations.PartsListBuilder.PartsListSymbolType

SQUARE - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.ZoneShapeOptions

square

SQUARE - Static variable in class nxopen.cae.MarkerType0d

SQUARE - Static variable in class nxopen.cae.ModelDisplayBuilder.FreeEdgeMarker

Square marker

SQUARE - Static variable in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeMarker

Square marker

SQUARE - Static variable in class nxopen.cae.xyplot.PointMarker

Square marker

SQUARE - Static variable in class nxopen.cam.InspectionCparlnFeatureBuilder.EndTypes

Bounded slot/tab has square end

SQUARE - Static variable in class nxopen.cam.RoughFinishTurningBuilder.MinmaxAreaUnits

Square length.

SQUARE - Static variable in class nxopen.cam.TurningToolBuilder.HolderShankTypes

Square Shank

SQUARE - Static variable in class nxopen.cam.TurnToolBuilder.InsertShapes

Insert shape: Square

SQUARE - Static variable in class nxopen.die.PierceItemBuilder.HoleShapeType

Square shaped hole

SQUARE - Static variable in class nxopen.drawings.DrawingCompareSettingsBuilder.ChangeSymbolType

Deprecated.

SQUARE - Static variable in class nxopen.drawings.TrackDrawingChangesGeneralBuilder.SymbolType

SQUARE - Static variable in class nxopen.features.sheetmetal.BendOptions.BendReliefTypeOptions

igRectangularBendRelief

SQUARE - Static variable in class nxopen.features.sheetmetal.BendTaperBuilder.BendTaperType

Square

SQUARE - Static variable in class nxopen.features.sheetmetal.ConvertToSheetmetalBuilder.BendReliefTypeOptions

SQUARE - Static variable in class nxopen.features.sheetmetal.GussetBuilder.Shapes

Specifies a square shape for the Gusset

SQUARE - Static variable in class nxopen.features.sheetmetal.HemFlangeBuilder.BendReliefOptions

SQUARE - Static variable in class nxopen.features.sheetmetal.ResizeBendRadiusBuilder.BendReliefTypeOptions

SQUARE - Static variable in class nxopen.fields.DisplayPropertiesBuilder.IndepDomDispType

SQUARE - Static variable in class nxopen.fields.DisplayPropertiesBuilder.ValuesEnum

SQUARE - Static variable in class nxopen.geometricutilities.QuadrilateralFrameBuilder.Subtypes

Square

SQUARE - Static variable in class nxopen.geometricutilities.RectangularPattern.SimplifiedLayoutTypes

Square Layout

SQUARE - Static variable in class nxopen.preferences.SubdivisionModelingPreferences.CagePolylineVertexStyles

SQUARE - Static variable in class nxopen.preferences.SubdivisionModelingPreferences.VertexStyleTypes

SQUARE - Static variable in class nxopen.tooling.DieDesPierceInsertBuilder.HoleShapeTypes

SQUARE - Static variable in class nxopen.tooling.UndersizeBuilder.Orbit

square

SQUARE - Static variable in class nxopen.uf.UFDisp.PolyMarker

SQUARE - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker

SQUARE_BUTT - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSymbolType

SQUARE_BUTT - Static variable in class nxopen.annotations.Symbol

Specifies square butt weld symbol

SQUARE_BUTT - Static variable in class nxopen.weld.WeldGrooveBuilder.Types

Square Butt

SQUARE_BUTT - Static variable in class nxopen.weld.WeldGrooveShape

Square butt shape

SQUARE_CUT - Static variable in class nxopen.features.shipdesign.PlateBoundaryOptionBuilder.TrimTypes

The plate side face is normal to the molding face.

SQUARE_CUT - Static variable in class nxopen.features.shipdesign.StiffenerLimitBuilder.LimitType

Stiffener will extend into limiting geometry.

SQUARE_DRAWING - Static variable in class nxopen.tooling.ForceCalculationBuilder.ProcessTypes

square drawing

SQUARE_IN_SQUARE - Static variable in class nxopen.cae.MarkerType0d

SQUARE_IN_SQUARE - Static variable in class nxopen.uf.UFDisp.PolyMarker

SQUARE_IN_SQUARE - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker

squareBottomSupportedUniformLoadDeflection(double, double, double, double) - Method in interface nxopen.EngineeringFunction

Calculate the maximum deflection of a square flat plate supported at the bottom only of all four edges under a uniformly distributed load over the surface of the plate.

squareBottomSupportedUniformLoadStress(double, double, double) - Method in interface nxopen.EngineeringFunction

Calculate the maximum tensile stress of a square flat plate supported at the bottom only of all four edges under a uniformly distributed load over the surface of the plate.

squareCutClearance() - Method in interface nxopen.features.shipdesign.StiffenerLimitBuilder

Returns the limit clearance value
License requirements: None.

squareEdgesFixedCenterLoadDeflection(double, double, double, double) - Method in interface nxopen.EngineeringFunction

Calculate the maximum deflection of a square flat plate with all edges firmly fixed under a uniformly distributed load over the surface of the plate.

squareEdgesFixedCenterLoadStress(double, double, double) - Method in interface nxopen.EngineeringFunction

Calculate the maximum tensile stress of a square flat plate with all edges firmly fixed under a uniformly distributed load over the surface of the plate.

squareEdgesFixedCircularCenterLoadDeflection(double, double, double, double, double) - Method in interface nxopen.EngineeringFunction

Calculate the maximum deflection of a square flat plate with all edges firmly fixed under a uniform load over small circular area at the center.

squareEdgesFixedCircularCenterLoadStress(double, double, double, double) - Method in interface nxopen.EngineeringFunction

Calculate the maximum tensile stress of a square flat plate with all edges firmly fixed under a uniform load over small circular area at the center.

squareEdgesSupportedCenterLoadDeflection(double, double, double, double, double) - Method in interface nxopen.EngineeringFunction

Calculate the maximum deflection of a square flat plate with all edges supported above and below, or below only under a concentrated load at the center.

squareEdgesSupportedCenterLoadStress(double, double, double, double) - Method in interface nxopen.EngineeringFunction

Calculate the maximum tensile stress of a square flat plate with all edges supported above and below, or below only under a concentrated load at the center.

squareTopBottomSupportedUniformLoadDeflection(double, double, double, double) - Method in interface nxopen.EngineeringFunction

Calculate the maximum deflection of a square flat plate supported at top and bottom of all four edges under a uniformly distributed load over the surface of the plate.

squareTopBottomSupportedUniformLoadStress(double, double, double) - Method in interface nxopen.EngineeringFunction

Calculate the maximum tensile stress of a square flat plate supported at top and bottom of all four edges under a uniformly distributed load over the surface of the plate.

SR - Static variable in class nxopen.annotations.RadiusSymbol

Specifes SR symbol

SR - Static variable in class nxopen.annotations.SearchCriteriaDimensionBuilder.RadialSymbolOptions

SR

sr1Left() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder

Returns the left SR1 alternative point.

sr1LeftFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder

Returns the left SR1 alternative point flag.

sr1Offset() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder

Returns the offset used to position SR1.

sr1Right() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder

Returns the right SR1 alternative point.

sr1RightFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder

Returns the right SR1 alternative point flag.

sr2ALeft() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder

Returns the left SR2A alternative point.

sr2ALeftFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder

Returns the left SR2A alternative point flag.

sr2ARight() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder

Returns the right SR2A alternative point.

sr2ARightFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder

Returns the right SR2A alternative point flag.

sr2BLeft() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder

Returns the left SR2B alternative point.

sr2BLeftFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder

Returns the left SR2B alternative point flag.

sr2BRight() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder

Returns the right SR2B alternative point.

sr2BRightFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder

Returns the right SR2B alternative point flag.

sr2Left() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder

Deprecated.

Deprecated in NX11.0.0. Use HeadImpactSideRailDetailBuilder.sr2ALeft() instead.

sr2LeftFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder

Deprecated.

Deprecated in NX11.0.0. Use HeadImpactSideRailDetailBuilder.sr2ALeftFlag() instead.

sr2Offset() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder

Returns the offset used to position SR2.

sr2Right() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder

Deprecated.

Deprecated in NX11.0.0. Use HeadImpactSideRailDetailBuilder.sr2ARight() instead.

sr2RightFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder

Deprecated.

Deprecated in NX11.0.0. Use HeadImpactSideRailDetailBuilder.sr2ARightFlag() instead.

sr3Left() - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailDetailBuilder

Returns the left SR3 alternative point.

sr3Left() - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailWizardBuilder

Returns the left additional Side Rail 3 point.

sr3LeftFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailDetailBuilder

Returns the left SR3 alternative point flag.

sr3Offset() - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailDetailBuilder

Returns the offset used to position SR3.

sr3Right() - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailDetailBuilder

Returns the right SR3 alternative point.

sr3Right() - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailWizardBuilder

Returns the right additional Side Rail 3 point.

sr3RightFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailDetailBuilder

Returns the right SR3 alternative point flag.

SrfanlData() - Constructor for class nxopen.uf.UFDisp.SrfanlData

SrfanlData(double, double[], double[], double, double, double, double, double, double, int, int, int, int, int, int, int, int, int, int, String, int, int, int, int, int, double, double, int, int, int, double, double, int, int, int, double, double, int, int, int, double, double, int, int, int, double, double, int, int, int, double, double, int, int, int, double, double, int, int, int, double, double, int, int, int, double, double, int, int, int) - Constructor for class nxopen.uf.UFDisp.SrfanlData

srfD2u - Variable in class nxopen.uf.UFModl.Srfvalue

srfD2udv - Variable in class nxopen.uf.UFModl.Srfvalue

srfD2v - Variable in class nxopen.uf.UFModl.Srfvalue

srfD3u - Variable in class nxopen.uf.UFModl.Srfvalue

srfD3v - Variable in class nxopen.uf.UFModl.Srfvalue

srfDu - Variable in class nxopen.uf.UFModl.Srfvalue

srfDud2v - Variable in class nxopen.uf.UFModl.Srfvalue

srfDudv - Variable in class nxopen.uf.UFModl.Srfvalue

srfDv - Variable in class nxopen.uf.UFModl.Srfvalue

srfNormal - Variable in class nxopen.uf.UFModl.Srfvalue

srfPos - Variable in class nxopen.uf.UFModl.Srfvalue

srfUnormal - Variable in class nxopen.uf.UFModl.Srfvalue

Srfvalue() - Constructor for class nxopen.uf.UFModl.Srfvalue

Srfvalue(double[], double[], double[], double[], double[], double[], double[], double[], double[], double[], double[], double[]) - Constructor for class nxopen.uf.UFModl.Srfvalue

SRS - Static variable in class nxopen.cae.responsesimulation.CombinationEvaluationOptions.MultipleExcitationCombinationMethod

SRSS - Static variable in class nxopen.cae.responsesimulation.CombinationEvaluationOptions.EvaluationMethod

srsToTime(String, int, AfuMathOperation.SrsToTimeOption, double, int, int, AfuMathOperation.SrsToTimeOctave, int, AfuMathOperation.SrsToTimeStrategy, boolean, String, String) - Method in interface nxopen.cae.AfuMathOperation

Convert SRS to Time
License requirements: nx_ftk ("NX Advanced Graphing")
.

ssaoBlurRadius() - Method in interface nxopen.display.Shadows

Returns the shadows SSAO Blur Radius
License requirements: None.

ssaoContrast() - Method in interface nxopen.display.Shadows

Returns the shadows SSAO contrast
License requirements: None.

ssaoQuality() - Method in interface nxopen.display.Shadows

Returns the shadows SSAO quality
License requirements: None.

ssaoRadius() - Method in interface nxopen.display.Shadows

Returns the shadows SSAO radius
License requirements: None.

ssCol - Variable in class nxopen.uf.UFTabnot.CellPrefs

sSection - Variable in class nxopen.uf.UFModlFeatures.AskBplaneData

sSection - Variable in class nxopen.uf.UFModlFeatures.AskRuled1Data

sSection - Variable in class nxopen.uf.UFModlFeatures.AskRuledData

sSection - Variable in class nxopen.uf.UFModlFeatures.AskSweepData

sSection - Variable in class nxopen.uf.UFModlFeatures.AskThruCurves1Data

sSection - Variable in class nxopen.uf.UFModlFeatures.AskThruCurvesData

SSHAPED - Static variable in class nxopen.geometricutilities.LawBuilder.Type

S-shaped law type

sshapedLaw() - Method in interface nxopen.geometricutilities.LawBuilder

Returns the s-shaped law.

SShapedLawBuilder - Interface in nxopen.geometricutilities

Represents a s-shaped law.

ssoappid - Variable in class nxopen.pdm.PdmSession.SsoSettingsData

the SSO app id

ssoserverurl - Variable in class nxopen.pdm.PdmSession.SsoSettingsData

the SSO server URL

SsoSettingsData() - Constructor for class nxopen.pdm.PdmSession.SsoSettingsData

sSpine - Variable in class nxopen.uf.UFModlFeatures.AskCurveMesh1Data

sSpine - Variable in class nxopen.uf.UFModlFeatures.AskCurveMeshData

sSpine - Variable in class nxopen.uf.UFModlFeatures.AskRuled1Data

sSpine - Variable in class nxopen.uf.UFModlFeatures.AskRuledData

sSpine - Variable in class nxopen.uf.UFModlFeatures.AskSweepData

sSpine - Variable in class nxopen.uf.UFModlFeatures.AskThruCurves1Data

sSpine - Variable in class nxopen.uf.UFModlFeatures.AskThruCurvesData

ssRow - Variable in class nxopen.uf.UFTabnot.CellPrefs

ssSheet - Variable in class nxopen.uf.UFTabnot.CellPrefs

STACK_ALIGN_ABOVE - Static variable in class nxopen.uf.UFDrf.StackAlignPosition

STACK_ALIGN_BELOW - Static variable in class nxopen.uf.UFDrf.StackAlignPosition

STACK_ALIGN_LEFT - Static variable in class nxopen.uf.UFDrf.StackAlignPosition

STACK_ALIGN_RIGHT - Static variable in class nxopen.uf.UFDrf.StackAlignPosition

STACK_UP_GAP - Static variable in class nxopen.weld.WeldAdvisorCheckerType

stack up gap

stackAboveSpaceFactor() - Method in interface nxopen.annotations.LetteringPreferences

Returns the stack above spacing factor for space buffer above annotation in stack.

stackAboveSpaceFactor() - Method in interface nxopen.annotations.LetteringStyleBuilder

Returns the stack above space factor.

stackAlignmentPosition - Variable in class nxopen.annotations.Annotation.AssociativeOriginData

StackAlignmentPosition - Class in nxopen.annotations

Specifies the site location of a stack

stackAlignmentPosition - Variable in class nxopen.uf.UFDrf.AssociativeOrigin

stackAnnotation - Variable in class nxopen.uf.UFDrf.AssociativeOrigin

stackAutospace() - Method in interface nxopen.annotations.LetteringPreferences

Returns the flag indicating whether to automatically set the stack spacing to system derived values
License requirements: None.

stackAutospace() - Method in interface nxopen.annotations.LetteringStyleBuilder

Returns the stack autospace setting.

stackBelowSpaceFactor() - Method in interface nxopen.annotations.LetteringPreferences

Returns the stack below spacing factor for space buffer below annotation in stack.

stackBelowSpaceFactor() - Method in interface nxopen.annotations.LetteringStyleBuilder

Returns the stack below space factor.

STACKED - Static variable in class nxopen.cae.DurabilityStrainGageAnalyzerBuilder.GageConstructionEnum

Stacked

stackHorizontalAlignment() - Method in interface nxopen.annotations.LetteringPreferences

Returns the stack horizontal(left/right) alignment option
License requirements: None.

stackHorizontalAlignment() - Method in interface nxopen.annotations.LetteringStyleBuilder

Returns the stack horizontal alignment
License requirements: None.

StackHorizontalAlignment - Class in nxopen.annotations

Specifies the horizontal alignment(left/right alignment) option when aligning annotations within a stack

stackingRecipe() - Method in interface nxopen.cae.LaminateGlobalLayup

Returns the global layup stacking recipe
License requirements: nx_lam_composites ("Laminate Composites")
.

stackInheritAssociatedObjects() - Method in interface nxopen.annotations.LetteringPreferences

Returns the flag indicating whether to inherit the associated objects of a stack when an annotation is inserted into a stack.

stackInheritAssociatedObjects() - Method in interface nxopen.annotations.LetteringStyleBuilder

Returns the stack inherit associated objects setting.

stackLeftSpaceFactor() - Method in interface nxopen.annotations.LetteringPreferences

Returns the stack left spacing factor for space buffer left annotation in stack.

stackLeftSpaceFactor() - Method in interface nxopen.annotations.LetteringStyleBuilder

Returns the stack left space factor.

stackRightSpaceFactor() - Method in interface nxopen.annotations.LetteringPreferences

Returns the stack right spacing factor for space buffer right annotation in stack.

stackRightSpaceFactor() - Method in interface nxopen.annotations.LetteringStyleBuilder

Returns the stack right space factor.

stackVerticalAlignment() - Method in interface nxopen.annotations.LetteringPreferences

Returns the stack vertical(above/below) alignment option
License requirements: None.

stackVerticalAlignment() - Method in interface nxopen.annotations.LetteringStyleBuilder

Returns the stack vertical alignment
License requirements: None.

StackVerticalAlignment - Class in nxopen.annotations

Specifies the vertical alignment(above/below alignment) option when aligning annotations within a stack

staffLength - Variable in class nxopen.uf.UFDisp.ConeheadAttrbSTag

STAGE - Static variable in class nxopen.display.ImageBasedLighting.ImagesType

Use the stage.

STAGE - Static variable in class nxopen.display.Reflection.Type

use the stage for reflections

stage() - Method in interface nxopen.display.Scene

Returns the stage - use to optionally define a box that can have between one and six visible "walls"
License requirements: None.

Stage - Interface in nxopen.display

Represents a Stage A stage is an environment cube, a six-sided room, that can have between one and six visible walls.

Stage.OrientationType - Class in nxopen.display

Represents an index to a floor plane type define

Stage.WallType - Class in nxopen.display

Represents an index to a particular wall in the stage.

STAGGER_RAMP_ON_PART - Static variable in class nxopen.cam.LevelToLevel.Types

Staggered ramp on part

staggerDistanceList() - Method in interface nxopen.features.shipdesign.SeamBuilder

Returns the list of stagger distances defined the shift distance to create the seam.

STAGGERED_SYMBOL - Static variable in class nxopen.annotations.LineWeldBuilder.StaggeredWeldType

STAGGERED_SYMBOL_WELD_SIDE - Static variable in class nxopen.annotations.LineWeldBuilder.StaggeredWeldType

staggeredFlag - Variable in class nxopen.uf.UFDrf.WeldSymbols

staggeredWeld() - Method in interface nxopen.annotations.LineWeldBuilder

Returns the staggered weld
License requirements: None.

staggeredWeldSymbolDisplay() - Method in interface nxopen.annotations.LineWeldData

Returns the flag indicating whether the staggered weld symbol is displayed
License requirements: None.

staggerShiftAlongMethod() - Method in interface nxopen.features.shipdesign.SeamBuilder

Returns the method used to define the seam stagger shift along method.

staggerType() - Method in interface nxopen.geometricutilities.CircularPattern

Returns the type of stagger to be used by the pattern
License requirements: None.

staggerType() - Method in interface nxopen.geometricutilities.RectangularPattern

Returns the type of stagger to be used by the pattern
License requirements: None.

stairNosing() - Method in interface nxopen.linedesigner.StairwayEquipmentBuilder

Returns the stair nosing
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

StairwayEquipmentBuilder - Interface in nxopen.linedesigner

To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createStairwayEquipmentBuilder
Default values.

stairWidth() - Method in interface nxopen.linedesigner.StairwayEquipmentBuilder

Returns the stair width
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

STAMP - Static variable in class nxopen.cae.optimization.TBSCastCondition.MiddlePlaneType

The element group is demolded keeping a stampable structure

STAMPING_DIE - Static variable in class nxopen.tooling.ToolingApplication

Stamping Die

stampingOperation() - Method in interface nxopen.tooling.DieEngDieTipBuilder

Returns the stamping operation
License requirements: die_engineering ("DIE ENGINEERING")
.

stampingOutput() - Method in interface nxopen.die.FaceSheetBuilder

Returns the stamping output feature of the Face Sheet
License requirements: die_engineering ("DIE ENGINEERING")
.

stampingOutput() - Method in interface nxopen.tooling.DieEngStampingCarryoverBuilder

Returns the stamping output
License requirements: None.

STAND_ALONE - Static variable in class nxopen.drawings.SectionViewBuilder.SectionViewModeType

STAND_ALONE - Static variable in class nxopen.drawings.SketchSectionLineBuilder.Type

STANDALONE - Static variable in class nxopen.drawings.MarkAsTemplateBuilder.TemplateTypeEnum

STANDALONE - Static variable in class nxopen.Part.Relations

no master model support

standaloneFilterFormatFile() - Method in interface nxopen.preferences.RoutingElectrical

Returns the option to export the XML routelist data with the formats and filters information separately.

standAloneInsertSheet() - Method in interface nxopen.drawings.GeneralWorkFlowBuilder

Returns the flag indicating whether to automatically starts the insert sheet command when entering the drafting application if no drawing sheets exist.

standAloneProjectedView() - Method in interface nxopen.drawings.GeneralWorkFlowBuilder

Returns the flag indicating whether to automatically starts the projected view command after inserting a drawing view.

standAloneProjectToView() - Method in interface nxopen.drawings.GeneralWorkFlowBuilder

Returns the flag indicating whether to automatically starts the projected view command after inserting a projected drawing view.

standAloneViewCreation() - Method in interface nxopen.drawings.GeneralWorkFlowBuilder

Returns the flag indicating whether to automatically starts the drawing view command after inserting a sheet with no views.

STANDARD - Static variable in class nxopen.annotations.DiameterSymbol

Specifies standard symbol

standard() - Method in interface nxopen.annotations.SurfaceFinishBuilder

Returns the standard
License requirements: None.

STANDARD - Static variable in class nxopen.cae.PolygonGeometryManager.PolygonBodyResolutionType

STANDARD - Static variable in class nxopen.cae.responsesimulation.RSEvent.DdamFormulationType

STANDARD - Static variable in class nxopen.cae.xyplot.Fonttype

Standard Font

STANDARD - Static variable in class nxopen.cam.CutParametersRegionSequencingTypes

standard

STANDARD - Static variable in class nxopen.cam.InspectionMethodBuilder.ProfileDispositionTypes

Standard

STANDARD - Static variable in class nxopen.cam.OperationBuilder.OptimizationLevelTypes

standard

STANDARD - Static variable in class nxopen.cam.ThreadToolBuilder.InsertShapes

Standard insert shape

STANDARD - Static variable in class nxopen.die.FlangeTaskBuilder.PierceTypes

Use Standard tolerance.

STANDARD - Static variable in class nxopen.die.PierceTaskBuilder.PrecisionTypes

Standard hole

STANDARD - Static variable in class nxopen.display.CameraBuilder.LensFlare

Standard lens

STANDARD - Static variable in class nxopen.display.FacetSettingsBuilder.AdvVisToleranceSetting

STANDARD - Static variable in class nxopen.display.FacetSettingsBuilder.ShadedToleranceSetting

STANDARD - Static variable in class nxopen.drawings.BordersAndZonesBuilder.ZoneMethod

Deprecated.

Standard

STANDARD - Static variable in class nxopen.drawings.Method

Standard

standard() - Method in interface nxopen.drawings.SectionLineStyleBuilder

Deprecated.

Deprecated in NX10.0.0. Use ViewSectionLineBuilder.typeStandard() instead.

STANDARD - Static variable in class nxopen.features.HolePackageBuilder.ThreadLengthOptions

Length is Standard

STANDARD - Static variable in class nxopen.features.MidSurfaceByFacePairsBuilder.SurfaceType

Default surface creation method

STANDARD - Static variable in class nxopen.features.shipdesign.PenetrationRequest.CompensationType

STANDARD - Static variable in class nxopen.features.vehicledesign.BaseDataLoadingBuilder.LoadingType

Standard - Defined in the registration file, user can not delete it.

standard() - Method in interface nxopen.features.vehicledesign.BumperPendulumBuilder

Returns the standard used to define the bumper pendulum.

standard() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder

Returns the standard types to define the close range visibility.

standard() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder

Returns the standard used to define the crash barrier.

standard() - Method in interface nxopen.features.vehicledesign.DynamicCurbBuilder

Returns the standard used to define the dynamic curb.

standard() - Method in interface nxopen.features.vehicledesign.GroundClearanceBuilder

Returns the standard to be used for this ground clearance feature.

standard() - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder

Returns the standard used for this head impact study.

standard() - Method in interface nxopen.features.vehicledesign.InnerAngleBuilder

Returns the standard used to define the inner angle.

standard() - Method in interface nxopen.features.vehicledesign.ManikinBuilder

Returns the standard used to define the manikin
License requirements: None.

standard() - Method in interface nxopen.features.vehicledesign.OilPanBuilder

Returns the standard used to define the oil pan.

standard() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

Returns the standard that should be used in the analysis
License requirements: None.

standard() - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder

Returns the standard for seat belt anchorage
License requirements: None.

standard() - Method in interface nxopen.features.vehicledesign.SlopeBuilder

Returns the standard used to define the slope.

standard() - Method in interface nxopen.features.vehicledesign.StaticCurbBuilder

Returns the standard used to define the static curb.

STANDARD - Static variable in class nxopen.features.vehicledesign.VisionPlaneBuilder.CustomVisionAngle

standard

standard() - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder

Returns the standard used to define the wheel covering.

standard() - Method in interface nxopen.features.vehicledesign.WheelFixingBuilder

Returns the standard used to define the wheel fixing.

STANDARD - Static variable in class nxopen.features.vehicledesign.WindshieldDatumBuilder.CustomVisionAngle

standard

STANDARD - Static variable in class nxopen.fields.DisplayPropertiesBuilder.DispResolutionEnum

STANDARD - Static variable in class nxopen.FontCollection.Type

Standard system font

STANDARD - Static variable in class nxopen.geometricanalysis.HighlightLinesAnalysisBuilder.Resolutions

Standard

STANDARD - Static variable in class nxopen.geometricutilities.EndHoleData.ThreadLengthOptions

Length is standard

STANDARD - Static variable in class nxopen.ListCreator.ResolutionType

Standard

STANDARD - Static variable in class nxopen.PlotBuilder.PlotTypes

Standard Plot

STANDARD - Static variable in class nxopen.preferences.GeneralToleranceOption

Standard

STANDARD - Static variable in class nxopen.preferences.PartModeling.GridResolutionType

Standard grid resolution

STANDARD - Static variable in class nxopen.preferences.PartVisualizationShade.AdvViewToleranceType

Standard

STANDARD - Static variable in class nxopen.preferences.PartVisualizationShade.ShadedViewToleranceType

For Standard: Facet Edge Tolerance is 0.005, Facet Chord Tolerance is 0.005 , and Angular Tolerance is 15

STANDARD - Static variable in class nxopen.preferences.SessionModeling.PreviewResolutionType

STANDARD - Static variable in class nxopen.preferences.ShadingToleranceOption

Standard

STANDARD - Static variable in class nxopen.tooling.BendInsertDesignBuilder.Types

standard insert

STANDARD - Static variable in class nxopen.tooling.FormingInsertBuilder.BlankTypes

standard blank.

STANDARD - Static variable in class nxopen.tooling.SpecialPiercingInsertBuilder.StandardOrUserDefinedTypes

standard - Variable in class nxopen.uf.UFPart.CompressFlags

STANDARD - Static variable in class nxopen.uf.UFUgfont.Type

STANDARD_ANGLES - Static variable in class nxopen.formboard.FormboardLayoutBuilder.BranchAngle

Apply a standard angle to the branch, the level of the branch determines which angle to apply.

STANDARD_DEV - Static variable in class nxopen.cae.LaminateRandomEventBuilder.ConfidenceLevelOptionEnum

STANDARD_DIAMETER_SYMBOL - Static variable in class nxopen.uf.UFDrf.DiameterSymbol

STANDARD_DIE_BASE - Static variable in class nxopen.tooling.DieBaseBuilder.Types

standard die base

STANDARD_DRIVE - Static variable in class nxopen.cam.CutPatternBuilder.Types

Standard Drive

STANDARD_DRIVE - Static variable in class nxopen.cam.DmBndBuilder.BndCutPatternTypes

Standard Drive

STANDARD_DRIVEN - Static variable in class nxopen.features.vehicledesign.BumperPendulumBuilder.RequirementsControlType

STANDARD_DRIVEN - Static variable in class nxopen.features.vehicledesign.CloseRangeVisibilityBuilder.RequirementsControlType

Standard driven type

STANDARD_DRIVEN - Static variable in class nxopen.features.vehicledesign.CrashBarrierBuilder.RequirementsControlsControlType

STANDARD_DRIVEN - Static variable in class nxopen.features.vehicledesign.DynamicCurbBuilder.RequirementsControlType

STANDARD_DRIVEN - Static variable in class nxopen.features.vehicledesign.GroundClearanceBuilder.RequirementControls

STANDARD_DRIVEN - Static variable in class nxopen.features.vehicledesign.HeadImpactBuilder.RequirementsControlType

STANDARD_DRIVEN - Static variable in class nxopen.features.vehicledesign.InnerAngleBuilder.RequirementsControlType

STANDARD_DRIVEN - Static variable in class nxopen.features.vehicledesign.OilPanBuilder.RequirementsControlType

STANDARD_DRIVEN - Static variable in class nxopen.features.vehicledesign.SlopeBuilder.RequirementsControlType

STANDARD_DRIVEN - Static variable in class nxopen.features.vehicledesign.StaticCurbBuilder.RequirementsControlType

Standard Driven

STANDARD_DRIVEN - Static variable in class nxopen.features.vehicledesign.WheelCoveringBuilder.RequirementsControlType

Represents the option for reading parameters from the config file

STANDARD_DRIVEN - Static variable in class nxopen.features.vehicledesign.WheelFixingBuilder.RequirementsControlType

STANDARD_FONTS_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId

STANDARD_FONTS_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId

STANDARD_INSERT - Static variable in class nxopen.tooling.DieInsertBuilder.InsertModeItems

The die insert mode is standard insert

STANDARD_INTERFERENCE - Static variable in class nxopen.features.shipdesign.ExamineSteelFeatureBuilderCheck

Check standard part interference

STANDARD_ORIENTATION_BACK - Static variable in class nxopen.uf.UFView.StandardOrientation

STANDARD_ORIENTATION_BOTTOM - Static variable in class nxopen.uf.UFView.StandardOrientation

STANDARD_ORIENTATION_DIMETRIC - Static variable in class nxopen.uf.UFView.StandardOrientation

STANDARD_ORIENTATION_FRONT - Static variable in class nxopen.uf.UFView.StandardOrientation

STANDARD_ORIENTATION_ISOMETRIC - Static variable in class nxopen.uf.UFView.StandardOrientation

STANDARD_ORIENTATION_LEFT - Static variable in class nxopen.uf.UFView.StandardOrientation

STANDARD_ORIENTATION_NONE - Static variable in class nxopen.uf.UFView.StandardOrientation

STANDARD_ORIENTATION_NUM_TYPES - Static variable in class nxopen.uf.UFView.StandardOrientation

STANDARD_ORIENTATION_RIGHT - Static variable in class nxopen.uf.UFView.StandardOrientation

STANDARD_ORIENTATION_TOP - Static variable in class nxopen.uf.UFView.StandardOrientation

STANDARD_ORIENTATION_TRIMETRIC - Static variable in class nxopen.uf.UFView.StandardOrientation

STANDARD_PART - Static variable in class nxopen.features.shipdesign.ShipnamesBuilderType

STANDARD_PART_BRACKET_DIVIDE - Static variable in class nxopen.features.shipdesign.ShipPreparationInfo.Types

The data represents a standard part bracket divide feature.

STANDARD_SIZE - Static variable in class nxopen.drawings.DrawingSheetBuilder.SheetOption

a standard size drawing sheet

STANDARD_TEXT_LISTING - Static variable in class nxopen.cam.InspectionAnalyzeOutputBuilder.OutputFormatType

Standard Text Listing

STANDARD_WIDTHS - Static variable in class nxopen.CGMBuilder.Width

Standard Widths

STANDARD_WIDTHS - Static variable in class nxopen.PlotColorsWidthsBuilder.Width

Standard Widths

STANDARD_WIDTHS - Static variable in class nxopen.PrintPDFBuilder.Width

Standard Widths

STANDARD_WIDTHS - Static variable in class nxopen.uf.UFCgm.Widths

STANDARD_WIDTHS - Static variable in class nxopen.uf.UFPlot.Widths

StandardBeamSection - Interface in nxopen.cae

Represents a Standard Beam Cross Section
To create or edit an instance of this class, use StandardBeamSectionBuilder

Created in NX7.5.0

StandardBeamSectionBuilder - Interface in nxopen.cae

Represents a StandardBeamSectionBuilder
To create a new instance of this class, use BeamSectionCollection.createStandardBeamSectionBuilder(nxopen.cae.StandardBeamSection)

Created in NX7.5.0

standardData() - Method in interface nxopen.drawings.ViewStyleThreadsBuilder

Returns the standard option data on the THREADS tab of the View Style Dialog
License requirements: None.

standardData() - Method in interface nxopen.tooling.ElectrodeComponentBuilder

Returns the electrode standard data spraedsheet.

standardDeviation() - Method in interface nxopen.cae.LaminateRandomEventBuilder

Returns the number of standard deviations used to calculate the confidence level
License requirements: None.

standardDeviation() - Method in interface nxopen.cae.responsesimulation.StrengthResultsEvaluationSettingBuilder

Returns the customized standard deviation for random event
License requirements: nx_response_anlys ("NX Response Analysis")
.

standardDieInsert() - Method in interface nxopen.tooling.DieInsertBuilder

Insert the standard die by invoking standard part management dialog
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

standardEnglishScale() - Method in interface nxopen.drawings.DrawingSheetBuilder

Returns the standard English drawing scale
License requirements: None.

standardMetricScale() - Method in interface nxopen.drawings.DrawingSheetBuilder

Returns the standard Metric drawing scale
License requirements: None.

standardName() - Method in interface nxopen.features.sheetmetal.AeroLighteningCutoutBuilder

Returns the standard name
License requirements: None.

standardName() - Method in interface nxopen.features.sheetmetal.LighteningCutoutBuilder

Returns the standard name selected
License requirements: None.

standardOrUserDefined() - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder

Returns the standard or user defined
License requirements: None.

StandardPart - Interface in nxopen.features.shipdesign

Represents a standard part feature.

standardPart() - Method in interface nxopen.tooling.ElectrodeComponentBuilder

Returns the electrode standard part to be installed.

standardPart() - Method in interface nxopen.tooling.ToolingManager

Returns the StandardPartCollection instance belonging to this part .

StandardPartBuilder - Interface in nxopen.tooling

Represents a builder to be used to create Mold Wizard Standard Part.

StandardPartBuilder.EditType - Class in nxopen.tooling

Represents the type to edit a standard part.

StandardPartBuilder.RefsetName - Class in nxopen.tooling

Represents the reference set of the standard part when it is added to the assembly.

StandardPartCollection - Interface in nxopen.tooling

Creates a StandardPartCollection class
To obtain an instance of this class, refer to ToolingManager

Created in NX7.5.0

standardPartComponent() - Method in interface nxopen.tooling.StandardPartBuilder

Returns the standard part component which is selected to be edited.

StandardPartData - Interface in nxopen.tooling

Represents the standard part client data.

standardPartEditType() - Method in interface nxopen.tooling.StandardPartBuilder

Returns the standard part edit type of processing the selected component.

StandardPartFrameworkBuilder - Interface in nxopen.features.shipdesign

Represents the standard part framework builder to add or edit ship standard part.

StandardPartFrameworkBuilder.CheckSpreadsheetInputData - Class in nxopen.features.shipdesign

This class holds the data returned from StandardPartFrameworkBuilder.checkSpreadsheetInput(nxopen.features.shipdesign.StandardPartItemBuilder)

StandardPartFrameworkBuilder.CreationType - Class in nxopen.features.shipdesign

Indicates the creation type

StandardPartFrameworkBuilder.RunSmartRuleData - Class in nxopen.features.shipdesign

This class holds the data returned from StandardPartFrameworkBuilder.runSmartRule(nxopen.features.shipdesign.StandardPartItemBuilder, nxopen.features.shipdesign.StandardPartFrameworkBuilder.SmartRuleStage)

StandardPartFrameworkBuilder.SmartRuleStage - Class in nxopen.features.shipdesign

Indicates the stage of the smart rule.

standardPartGroupOption() - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder

Returns the option whether to group multiple standard parts together to share the same parameters during the update when editing.

standardPartItem() - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder

Returns the standard part item, which is the builder of the selection item.

StandardPartItemBuilder - Interface in nxopen.features.shipdesign

Represents the ship standard part item builder.

StandardPartItemBuilder.Direction - Class in nxopen.features.shipdesign

Represents the ship standard part installation direction and thickness direction.

StandardPartItemBuilderList - Interface in nxopen.features.shipdesign

Represents a list of objects.

standardPartList() - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder

Returns the standard part list, which supports to add more than one standard part at one time.

standardPartPosition() - Method in interface nxopen.tooling.ToolingManager

Returns the StandardPartCollection instance belonging to this part .

StandardPartPositionBuilder - Interface in nxopen.tooling

Represents a StandardPartPositionBuilder to add or edit a standard part in the selected plane with specified position.

StandardPartPositionCollection - Interface in nxopen.tooling

Creates a StandardPartPositionCollection class
To obtain an instance of this class, refer to ToolingManager

Created in NX8.5.0

StandardPartSCAssist - Interface in nxopen.features.shipdesign

Represents
To create or edit an instance of this class, use StandardPartFrameworkBuilder

Created in NX9.0.0

standardPunchInsert() - Method in interface nxopen.tooling.PunchInsertBuilder

Load standard punch for normal pierce design.

standardPunchTag() - Method in interface nxopen.tooling.PunchInsertBuilder

Returns the standard punch tag.

StandardViewsBuilder - Interface in nxopen.drawings

This builder allows the user to create a Drawing View
To create a new instance of this class, use DraftingViewCollection.createStandardViewsBuilder()
Default values.

StandardViewsBuilder.Placement - Class in nxopen.drawings

The view Layout placement type (deprecated)

StandardViewsBuilder.Type - Class in nxopen.drawings

The view Layout type

StandardViewsBuilder.View - Class in nxopen.drawings

The view type to create

standoffDistance() - Method in interface nxopen.cam.ProbeProtectedParametersBuilder

Returns the standoff distance
License requirements: None.

STAR - Static variable in class nxopen.display.CameraBuilder.LensFlare

star lens

STARBOARD - Static variable in class nxopen.features.shipdesign.SectionViewBuilder.SymmetricalStructureOptions

Only show starboard side of the bulkhead section view.

STARBOARD - Static variable in class nxopen.features.shipdesign.ShipCoordinatesBuilder.YDirectionType

STARBOARD - Static variable in class nxopen.features.shipdesign.StandardPartItemBuilder.Direction

starboard

start() - Method in interface nxopen.annotations.SymmetricalCenterlineBuilder

Returns the start object of Symmetrical Centerline
License requirements: None.

START - Static variable in class nxopen.cae.MeshControlBuilder.ProgressionTypes

START - Static variable in class nxopen.cae.MeshControlBuilder.SizeTypes

START - Static variable in class nxopen.cam.CAMSetup.Ude

start UDE

start() - Method in interface nxopen.cam.PitchSetting

Returns the start
License requirements: None.

START - Static variable in class nxopen.cam.WedmOperationBuilder.InPathUdeSetTypes

in path ude set at start

start - Variable in class nxopen.DatumAxis.EndPointsData

Start point of datum axis

start() - Method in interface nxopen.die.MachineReliefBuilder

Returns the location for the start of the segment definition.

start() - Method in interface nxopen.die.QuickBinderBuilder

Returns the start length extension.

start() - Method in interface nxopen.die.RibChildBuilder

Returns the start limit geometry of the die rib.

start(View) - Method in interface nxopen.display.NonProportionalZoom

Prepares NX to receive one or more gestures delimited by pairs of points which define a non-proportional zoom.

START - Static variable in class nxopen.features.DivideCurveBuilder.InputArcLengthDirectionFlag

Input Arc length from start

START - Static variable in class nxopen.features.SectionSurfaceBuilder.ControlRegionEnum

Deprecated.

depth and skew applied to the start section of the section surface

START - Static variable in class nxopen.features.SectionSurfaceBuilderEx.ControlRegionType

depth and skew applied to the start section of the section surface

START - Static variable in class nxopen.features.sheetmetal.MiterOptions.PositionOptions

miter is done at the beginning

START - Static variable in class nxopen.features.shipdesign.OrientationAngleMethodsBuilder.AlignAtTypes

START - Static variable in class nxopen.features.TrimCurveBuilder.CurveEndOptions

Trim curve from start

START - Static variable in class nxopen.features.TrimCurveBuilder.FirstBoundingObjectEndOptions

Trim first bounding object from start

START - Static variable in class nxopen.features.TrimCurveBuilder.SecondBoundingObjectEndOptions

Trim second ounding object from start

start() - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord

Deprecated.

Deprecated in NX8.5.0. Use CurveAnalysisDisplay .

START - Static variable in class nxopen.geometricutilities.CurveRangeBuilder.AnchorPositionType

Anchor at the start of the curve

start() - Method in interface nxopen.geometricutilities.CurveRangeBuilder

Returns the start
License requirements: None.

START - Static variable in class nxopen.geometricutilities.ExtensionSide

Extension Side Start

START - Static variable in class nxopen.geometricutilities.RegionTracker.ExtremityType

start

START - Static variable in class nxopen.InferSnapType.SnapType

Snap point start

START - Static variable in class nxopen.mechanicalrouting.PathTransitionBuilder.HealOrientation

START - Static variable in class nxopen.mechatronics.MechatronicsSession.SimulationAction

Start

start(String, boolean) - Method in interface nxopen.MovieManager

Starts movie recording
License requirements: None.

START - Static variable in class nxopen.routing.HandrailBuilder.PostTypes

START - Static variable in class nxopen.routing.OverstockBuilder.PointType

Start

START - Static variable in class nxopen.routing.PointDefinition

The point defines the start of the overstock application.

START - Static variable in class nxopen.routing.ProfileFrom

Profile is at the start of the first segment.

START - Static variable in class nxopen.sim.IsvControlPanelBuilder.VncMode

START

START - Static variable in class nxopen.tooling.DieEngTrimTaskBuilder.TrimTaskMatchCutType

START - Static variable in class nxopen.uf.UFCurve.EndType

start - Variable in class nxopen.uf.UFDraw.TabnotLine

start - Variable in class nxopen.uf.UFEval.Line

start - Variable in class nxopen.uf.UFPath.CircularMotion

start - Variable in class nxopen.uf.UFPath.HelicalMotion

start - Variable in class nxopen.uf.UFRoute.AskSegmentEndPntsData

start - Variable in class nxopen.uf.UFStudio.StybldCurveTrans

start - Variable in class nxopen.uf.UFStudio.StybldShapeTrans

START_AND_END - Static variable in class nxopen.annotations.OrdinateDoglegDefinition

Specifies start and end offeset defined

START_AND_END - Static variable in class nxopen.annotations.SymmetricalCenterlineBuilder.Types

Centerline from start and end point

START_AND_END - Static variable in class nxopen.cae.MeshControlBuilder.SizeTypes

START_AND_END - Static variable in class nxopen.cam.PitchSetting.VarianceTypes

Start and End

START_AND_END - Static variable in class nxopen.features.MatchEdgeBuilder.PoleMovementConstraintEnumType

Fix start and end

START_AND_END_POINT - Static variable in class nxopen.cam.TabPointDataBuilder.TabMethodType

Start and End point

START_AND_INCREMENT - Static variable in class nxopen.cam.PitchSetting.VarianceTypes

Start and Increment

START_ANGLE - Static variable in class nxopen.annotations.OrdinateDoglegDefinition

Specifies start offset and dogleg angle defined

START_END - Static variable in class nxopen.geometricutilities.ExtensionSide

Extension Side Start/End

START_END_POINT - Static variable in class nxopen.cae.responsesimulation.ResponseDomainDefinitionMethod

START_OF_CONIC_MOTION - Static variable in class nxopen.cam.ToolpathEventType

START_OF_PASS - Static variable in class nxopen.cam.ToolpathEventType

START_OF_PATH - Static variable in class nxopen.cam.ToolpathEventType

START_ONLY - Static variable in class nxopen.tooling.RunnerBuilder.GuideEndType

Use the start point only.

START_POINT - Static variable in class nxopen.MeasureManager.EndpointType

START_POINT - Static variable in class nxopen.Sketch.AssocType

Start point.

START_POINT - Static variable in class nxopen.uf.UFGexp.Qualifier

START_POINT_OUTPUT - Static variable in class nxopen.cam.ToolpathEventType

START_SET - Static variable in class nxopen.uf.UFUde.SetType

START_TO_END - Static variable in class nxopen.weld.WeldPointDirection

Direction is from start to end

START_VERTEX - Static variable in class nxopen.Sketch.ConstraintPointType

Start vertex (e.g. the start point of a line)

START_VERTEX - Static variable in class nxopen.uf.UFSket.GeomVertex

startAdjustment() - Method in interface nxopen.features.sheetmetal.AdvancedFlangeBuilder

Returns the flat pattern compensation adjustment at start of the flange
License requirements: None.

startAlignFillerSurfaceOption() - Method in interface nxopen.geometricutilities.AlignmentMethodBuilder

Returns the start align filler surface option
License requirements: None.

STARTAND_END_LOCATIONS - Static variable in class nxopen.formboard.ObjectAttributeReferenceBuilder.LeaderType

Two leaders for annotation with start and end location.

StartAndDirectionData() - Constructor for class nxopen.Section.StartAndDirectionData

StartAndDirectionOfLoopData() - Constructor for class nxopen.Section.StartAndDirectionOfLoopData

startAndEndParametersEqual() - Method in interface nxopen.features.sheetmetal.BridgeTransitionBuilder

Returns the option to find whether the start and end parameters are equal.

StartAndEndRcpData() - Constructor for class nxopen.routing.SplinePathBuilder.StartAndEndRcpData

startAngle() - Method in interface nxopen.annotations.ArcComponent

Returns the arc start angle in radians.

startAngle() - Method in interface nxopen.Arc

Returns the start angle of the arc.

startAngle() - Method in interface nxopen.cam.InspectionArcFeatureBuilder

Returns the Arc start angle
License requirements: None.

startAngle() - Method in interface nxopen.cam.RoughFinishTurningBuilder

Returns the start angle
License requirements: None.

startangle - Variable in class nxopen.cam.SpunOutlineGeom.PlanesAtAnglesData

array of start angles for each set

startAngle() - Method in interface nxopen.die.QuickBinderBuilder

Returns the start angle of a planar face.

startangle - Variable in class nxopen.Ellipse.ParametersData

In radians

startAngle() - Method in interface nxopen.Ellipse

Returns the start angle.

startAngle() - Method in interface nxopen.features.AssociativeLineBuilder

Returns the start angle
License requirements: None.

startAngle() - Method in interface nxopen.features.HelixBuilder

Returns the start angle
License requirements: None.

startAngle() - Method in interface nxopen.features.IsoclineCurveBuilder

Returns the start angle
License requirements: None.

startAngle() - Method in interface nxopen.features.SectionCurveBuilder

Returns the start angle
License requirements: None.

startAngle() - Method in interface nxopen.features.subdivision.SubdivisionRevolveBuilder

Returns the start of angular dimension.

startAngle() - Method in interface nxopen.mechatronics.CylindricalJointBuilder

Returns the start angle.

startAngle() - Method in interface nxopen.mechatronics.HingeJointBuilder

Returns the start angle.

startAngle() - Method in interface nxopen.SketchEllipseBuilder

Returns the start angle
License requirements: None.

startAngle - Variable in class nxopen.uf.UFCurve.Arc

startAngle - Variable in class nxopen.uf.UFCurve.AskIsoclineData

startAngle - Variable in class nxopen.uf.UFCurve.SectionRadialData

startAngle - Variable in class nxopen.uf.UFDrf.ArcInfo

startAngle - Variable in class nxopen.uf.UFModl.DimensionData

startAngle() - Method in interface nxopen.weld.WeldGrooveBuilder

Returns the taper angle at the start of the weld
License requirements: ugweld ("UG WELD")
.

startAngleMethods() - Method in interface nxopen.features.shipdesign.OrientationRegionItemBuilder

Returns the angle definition for the start of this region's orientation.

startAtAngle() - Method in interface nxopen.features.AssociativeLineBuilder

Returns the start at angle
License requirements: None.

startAtArcCenter() - Method in interface nxopen.cam.NcmPlanarEngRetBuilder

Returns the engage/retract start at arc center
License requirements: None.

startAttachment() - Method in interface nxopen.features.shipdesign.BracketBuilder

Returns the start attachment.

startAttachmentLimit() - Method in interface nxopen.features.shipdesign.BracketBuilder

Returns the start attachment limit.

startBlendScaleFactor() - Method in interface nxopen.geometricutilities.ScalingMethodBuilder

Returns the start blend scale factor.

startBoundary() - Method in interface nxopen.features.shipdesign.StiffenerBySupportPathBuilder

Returns the start boundary, it allows to select curve, sheet body and solid body
License requirements: None.

startCapLimitPlaneOption() - Method in interface nxopen.features.FaceBlendBuilder

Returns the start limit plane capping option
License requirements: None.

startCapPlateStock() - Method in interface nxopen.features.shipdesign.PillarBuilder

Returns the plate stock builder, which defines the seam material, grade, and thickness
License requirements: None.

startCapSize() - Method in interface nxopen.features.shipdesign.SteelSupportBuilder

Returns the start cap size.

startCapStock() - Method in interface nxopen.features.shipdesign.PillarBuilder

Returns the list of available material attributes.

startCapThickness() - Method in interface nxopen.features.shipdesign.PillarBuilder

Returns the start cap thickness.

startCapThickness() - Method in interface nxopen.features.shipdesign.SteelSupportBuilder

Returns the start cap thickness
License requirements: None.

startCapType() - Method in interface nxopen.features.shipdesign.SteelSupportBuilder

Returns the start cap type.

startChamferAngle() - Method in interface nxopen.geometricutilities.MiddleHoleData

Returns the start chamfer angle
License requirements: None.

startChamferAngle() - Method in interface nxopen.geometricutilities.StartHoleData

Returns the start chamfer angle
License requirements: None.

startChamferEnabled() - Method in interface nxopen.geometricutilities.MiddleHoleData

Returns the start chamfer enabled
License requirements: None.

startChamferEnabled() - Method in interface nxopen.geometricutilities.StartHoleData

Returns the start chamfer enabled
License requirements: None.

startChamferOffset() - Method in interface nxopen.geometricutilities.MiddleHoleData

Returns the start chamfer offset
License requirements: None.

startChamferOffset() - Method in interface nxopen.geometricutilities.StartHoleData

Returns the start chamfer offset
License requirements: None.

startCheckBoundary() - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder

Returns the start check boundary builder
License requirements: None.

startCheckConstantStock() - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder

Returns the constant stock for start check geometry
License requirements: None.

startCheckFaceStock() - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder

Returns the face stock for start check geometry
License requirements: None.

startCheckRadialStock() - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder

Returns the radial stock for start check geometry
License requirements: None.

startClosestToPreviousRetract() - Method in interface nxopen.cam.BladeRough

Returns the Start Closest to Previous Retract
License requirements: None.

startColumn - Variable in class nxopen.uf.UFTabnot.AskMergeInfoData

startConnectivity() - Method in interface nxopen.features.BridgeCurveBuilderEx

Returns the data representing connectivity information at start
License requirements: None.

startConnector - Variable in class nxopen.SectionElementData.Data

The element that is connected to the section_element, at the start_point

startConnector - Variable in class nxopen.SectionElementData.SectionElementData1

The element that is connected to the section_element, at the start_point - this can be curve or point

startConstraint() - Method in interface nxopen.features.SmoothSplineBuilder

Returns the start constraint
License requirements: None.

startContinuity() - Method in interface nxopen.features.SectionSurfaceBuilder

Deprecated.

Deprecated in NX9.0.0. Use SectionSurfaceBuilderEx instead.

startContinuity() - Method in interface nxopen.features.SectionSurfaceBuilderEx

Returns the start continuity.

startContinuity() - Method in interface nxopen.geometricutilities.CurveShapingBuilder

Returns the continuity at start of the curve
License requirements: None.

startContinuityOption() - Method in interface nxopen.features.BridgeCurveBuilder

Deprecated.

Deprecated in NX8.5.0. Use BridgeCurveBuilderEx instead.

startCurve() - Method in interface nxopen.features.shipdesign.TraceLinesBuilder

Returns the start curve
License requirements: None.

startCurveDirectionOption() - Method in interface nxopen.features.BridgeCurveBuilder

Deprecated.

Deprecated in NX8.5.0. Use BridgeCurveBuilderEx instead.

startCut() - Method in interface nxopen.cam.DmTrimExtend

Returns the start cut
License requirements: None.

startData - Variable in class nxopen.uf.UFGdt.DatumTargetLine

startDeleteVolume() - Method in interface nxopen.cae.optimization.TBSTopologyControllerOptimizationParameters

Returns the volume that is deleted in the first design cycle
License requirements: None.

startDeltaAngle() - Method in interface nxopen.cam.TurnAvoidanceStartBuilder

Returns the start delta angle
License requirements: None.

startDeltaDistance() - Method in interface nxopen.cam.TurnAvoidanceStartBuilder

Returns the start delta distance
License requirements: None.

startDeltaVector() - Method in interface nxopen.cam.TurnAvoidanceStartBuilder

Returns the start delta vector
License requirements: None.

startDeltaX() - Method in interface nxopen.cam.TurnAvoidanceStartBuilder

Returns the start delta X
License requirements: None.

startDeltaY() - Method in interface nxopen.cam.TurnAvoidanceStartBuilder

Returns the start delta Y
License requirements: None.

startDepthSkew() - Method in interface nxopen.features.SectionSurfaceBuilder

Deprecated.

Deprecated in NX9.0.0. Use SectionSurfaceBuilderEx instead.

startDepthSkew() - Method in interface nxopen.features.SectionSurfaceBuilderEx

Returns the start depth skew.

startDiameter() - Method in interface nxopen.cam.CylinderMillingBuilder

Returns the Start Diameter
License requirements: None.

startDiameter() - Method in interface nxopen.cam.HoleBossSet

Returns the start diameter
License requirements: None.

startDirection() - Method in interface nxopen.AutomaticTraceline

Returns the start direction of the traceline
License requirements: assemblies ("ASSEMBLIES MODULE")
.

startDirection() - Method in interface nxopen.features.SectionSurfaceBuilderEx

Returns the start direction.

startDirectionAngle() - Method in interface nxopen.features.BridgeCurveBuilder

Deprecated.

Deprecated in NX8.5.0. Use BridgeCurveBuilderEx instead.

startDirIteration(Tag) - Method in interface nxopen.uf.UFDirpath

Refer to UF_DIRPATH_start_dir_iteration for documentation.

startDist() - Method in interface nxopen.weld.FilletBuilder

Returns the on path dimension start distance.

startDistance() - Method in interface nxopen.cam.BoundaryTurnMemberOffset

Returns the offset start distance (conical)
License requirements: None.

startDistance() - Method in interface nxopen.cam.InspectionCurveFeatureBuilder

Returns the start distance
License requirements: None.

startDistance() - Method in interface nxopen.cam.InspectionMethodBuilder

Returns the start point offset distance along the scan
License requirements: None.

startDistance() - Method in interface nxopen.cam.InspectionScanArcBuilder

Returns the Start Distance of the Scan Arc
License requirements: None.

startDistance() - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder

Returns the Start Distance of the Scan Curve
License requirements: None.

startDistance() - Method in interface nxopen.cam.InspectionScanCurveBuilder

Returns the Start Distance of the Scan Curve
License requirements: None.

startDistance() - Method in interface nxopen.cam.InspectionScanHelixBuilder

Returns the Start Distance of the Scan Helix
License requirements: None.

startDistance() - Method in interface nxopen.cam.InspectionScanLineBuilder

Returns the Start Distance of the Scan Line
License requirements: None.

startDistance() - Method in interface nxopen.features.SectionCurveBuilder

Returns the the start distance
License requirements: None.

startDistance() - Method in interface nxopen.geometricutilities.CurveLengthData

Returns the start distance
License requirements: solid_modeling ("SOLIDS MODELING")
.

startDistance - Variable in class nxopen.uf.UFCurve.SectionParallelData

startDistance() - Method in interface nxopen.weld.JointmarkGuideBuilder

Returns the start distance.

startDistance() - Method in interface nxopen.weld.WeldGrooveBuilder

Returns the start limit as defined by the distance along the edge
License requirements: ugweld ("UG WELD")
.

startDistance() - Method in interface nxopen.weld.WeldPointBuilder

Returns the start dist
License requirements: ugweld ("UG WELD")
.

startDistanceAnalysis() - Method in interface nxopen.geometricanalysis.DistanceAnalysisBuilder

Start distance analysis.

startDistanceBuilder() - Method in interface nxopen.cam.InspectionScanArcBuilder

Returns the Start Distance of the Scan Arc
License requirements: None.

startDistanceBuilder() - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder

Returns the Start Distance of the Scan Curve
License requirements: None.

startDistanceBuilder() - Method in interface nxopen.cam.InspectionScanCurveBuilder

Returns the Start Distance of the Scan Curve
License requirements: None.

startDistanceBuilder() - Method in interface nxopen.cam.InspectionScanLineBuilder

Returns the Start Distance of the Scan Line
License requirements: None.

startDistanceLocation() - Method in interface nxopen.weld.WeldPointBuilder

Returns the start dist location
License requirements: ugweld ("UG WELD")
.

startDrag() - Method in interface nxopen.formboard.FlipComponentBuilder

Starts the drag operation of selected object.

startDrag() - Method in interface nxopen.formboard.OrientBranchBuilder

Deprecated.

Deprecated in NX9.0.1. This method is no longer required.

startDrag() - Method in interface nxopen.mechanicalrouting.EditPointBuilder

Begin a drag operation.

startDrag() - Method in interface nxopen.mechanicalrouting.MovePathBuilder

Begin a drag operation.

startDrag() - Method in interface nxopen.routing.ClockPartBuilder

Begin a drag operation.

startDrag() - Method in interface nxopen.routing.TransformPathBuilder

Begin a drag operation.

startEdge - Variable in class nxopen.EdgeChainRule.Data

Start edge of edge chain.

startEdge - Variable in class nxopen.EdgeTangentRule.Data

Start edge of edge tangent rule

startEdge - Variable in class nxopen.EdgeVertexRule.Data

Start edge of edge vertex rule

startEdge - Variable in class nxopen.EdgeVertexTangentRule.Data

Start edge of edge tangent rule

startEdge() - Method in interface nxopen.features.sheetmetal.BridgeTransitionBuilder

Returns the start edge
License requirements: nx_flexible_pcb ("NX Flexible PCB") OR nx_sheet_metal ("NX Sheet Metal")
.

startEdge() - Method in interface nxopen.features.sheetmetal.GussetBuilder

Returns the start edge
Only use this option to edit gussets created prior to NX10.

startEdge() - Method in interface nxopen.tooling.PrebendBuilder

Returns the start edge of bend face to specify the angle01 to angle05 start from
License requirements: None.

startEdgeConstraint() - Method in interface nxopen.features.MatchEdgeBuilder

Returns the value indicating type of the start edge constraint
License requirements: None.

startElement - Variable in class nxopen.Section.StartAndDirectionData

The element, curve or edge, specifying the starting of the section.

startElevation() - Method in interface nxopen.linedesigner.StairwayEquipmentBuilder

Returns the start elevation
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

startEndCut() - Method in interface nxopen.features.shipdesign.PillarBuilder

Returns the start end cut
License requirements: None.

startEndCut() - Method in interface nxopen.features.shipdesign.StiffenerBuilder

Returns the start end cut
License requirements: None.

startEndCutBlock() - Method in interface nxopen.features.shipdesign.ProfileBuilder

Returns the start end cut block
License requirements: None.

startEndMode() - Method in interface nxopen.cam.InspectionCurveFeatureBuilder

Returns the start end mode
License requirements: None.

startEndMode() - Method in interface nxopen.cam.InspectionMethodBuilder

Returns the scan start end mode
License requirements: None.

startEndMode() - Method in interface nxopen.cam.InspectionScanArcBuilder

Returns the start/end mode
License requirements: None.

startEndMode() - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder

Returns the start/end mode
License requirements: None.

startEndMode() - Method in interface nxopen.cam.InspectionScanCurveBuilder

Returns the start/end mode
License requirements: None.

startEndMode() - Method in interface nxopen.cam.InspectionScanHelixBuilder

Returns the start/end mode
License requirements: None.

startEndMode() - Method in interface nxopen.cam.InspectionScanLineBuilder

Returns the start/end mode
License requirements: None.

starteventflag - Variable in class nxopen.cam.TurnAvoidancePathPointsBuilder.PointData

the start event status

starteventpath - Variable in class nxopen.cam.TurnAvoidancePathPointsBuilder.PointData

the start event path

startEventsBuilder() - Method in interface nxopen.cam.BoundaryMillingMemberSet

Returns the start events builder
License requirements: None.

startExtDistSpecValueBuilder() - Method in interface nxopen.cam.DmCmBuilder

Returns the builder of Distance, Contour Milling Drive: Start of Cut
License requirements: cam_base ("CAM BASE")
.

startExtend() - Method in interface nxopen.geometricutilities.Limits

Returns the start extend builder
License requirements: None.

startExtension() - Method in interface nxopen.cam.FollowGeometryMoveBuilder

Returns the start extension
License requirements: None.

startExtension - Variable in class nxopen.routing.HealPath.AllData

startExtensionEnabled() - Method in interface nxopen.features.HolePackageBuilder

Returns the extend start enabled - this is applicable for start extension to all hole types
License requirements: None.

startExtensionOption() - Method in interface nxopen.geometricutilities.CurveExtensionBuilder

Returns the extension options
License requirements: None.

startExtensionOption() - Method in interface nxopen.geometricutilities.SplineExtensionBuilder

Returns the extension options
License requirements: None.

startFace - Variable in class nxopen.FaceTangentRule.Data

Start face of face tangent rule

startFace() - Method in interface nxopen.features.SectionSurfaceBuilderEx

Returns the start face.

startFace - Variable in class nxopen.uf.UFModl.SymbThreadData

startFacetBody() - Method in interface nxopen.features.MeshTransformerBuilder

Returns the start facet body
License requirements: None.

startFlowDirection() - Method in interface nxopen.features.SectionSurfaceBuilder

Deprecated.

Deprecated in NX9.0.0. Use SectionSurfaceBuilderEx instead.

startFrameName() - Method in interface nxopen.features.shipdesign.InsertFramesBuilder

Returns the Transverse Frame name
License requirements: None.

startFrameName() - Method in interface nxopen.features.shipdesign.ItFrameListItemBuilder

Returns the start reference transverse frame name.

startFromCenter() - Method in interface nxopen.cam.NcmHoleMachining

Returns the start from center
License requirements: None.

startFromCenter() - Method in interface nxopen.cam.NcmHoleMachiningEngRet

Returns the engage/retract start at arc center
License requirements: None.

startFromSafePlane() - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder

Returns a flag to indicate whether to start from safe plane before first path
License requirements: None.

startGuide() - Method in interface nxopen.features.SectionSurfaceBuilder

Deprecated.

Deprecated in NX9.0.0. Use SectionSurfaceBuilderEx instead.

startHighlightCurve() - Method in interface nxopen.features.SectionSurfaceBuilderEx

Returns the start highlight curve.

startHighlightSection() - Method in interface nxopen.features.SectionSurfaceBuilder

Deprecated.

Deprecated in NX9.0.0. Use SectionSurfaceBuilderEx instead.

startHoleData() - Method in interface nxopen.features.HolePackageBuilder

Returns the start target body
License requirements: None.

StartHoleData - Interface in nxopen.geometricutilities

Represents a StartHoleData
Created in NX5.0.2

StartHoleData.HoleForms - Class in nxopen.geometricutilities

This enum represents hole form options in start plate of hole series.

startImport() - Method in interface nxopen.annotations.ImportSymbolBuilder

Starts the Import process
License requirements: nx_layout ("NX Layout")
.

startInferredConstraint() - Method in interface nxopen.features.AssociativeArcBuilder

Returns the start inferred constraint
License requirements: None.

startInferredConstraint() - Method in interface nxopen.features.AssociativeLineBuilder

Returns the start inferred constraint
License requirements: None.

startingidentifier - Variable in class nxopen.routing.ReuseLibrary.SpecificationsGetPostPlacementRulesData

Library node to begin searching from.

startInsertingSection(double[]) - Method in interface nxopen.features.StyledSweepBuilder

Starts inserting section.

startIsoAngle() - Method in interface nxopen.geometricanalysis.HighlightLinesAnalysisBuilder

Returns the start angle for isoclines (uniform)
License requirements: None.

startIteration - Variable in class nxopen.cae.Post.Animation

startIteration() - Method in interface nxopen.uf.UFClone

Refer to UF_CLONE_start_iteration for documentation.

startIterIndex() - Method in interface nxopen.cae.ResultProbeBuilder

Returns the start iter index
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

startIterValue() - Method in interface nxopen.cae.ResultProbeBuilder

Returns the start iter value
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

startLabel() - Method in interface nxopen.cae.MultipleElementCreateBuilder

Returns the starting label used to assign element labels, if no explicit labels were defined.

startLabel() - Method in interface nxopen.cae.MultipleNodeCreateBuilder

Returns the starting label used to assign node labels, if no explicit labels were defined.

startLimit() - Method in interface nxopen.features.HelixBuilder

Returns the start limit
License requirements: None.

startLimit() - Method in interface nxopen.features.shipdesign.PillarBuilder

Returns the start path limit
License requirements: None.

startLimit() - Method in interface nxopen.features.shipdesign.StiffenerBuilder

Returns the start path limit
License requirements: None.

startLimit() - Method in interface nxopen.geometricutilities.CurveLimitsData

Returns the start limit
License requirements: None.

startLimit() - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusFaceGroupBuilder

Returns the start position of reduced sheet body
License requirements: None.

startLimit() - Method in interface nxopen.tooling.SpecialFormingBuilder

Returns the start limit
License requirements: None.

startLimit() - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder

Returns the start limit
License requirements: None.

startLimit - Variable in class nxopen.uf.UFModl.BlendFacesLimitData

startLimitFaceNormalFlag() - Method in interface nxopen.features.FaceBlendBuilder

Returns the start limiting face normal flag
License requirements: None.

startLimitFacesetCollector() - Method in interface nxopen.features.FaceBlendBuilder

Returns the start limit faceset collector
License requirements: None.

startLimitPlane - Variable in class nxopen.features.FaceBlendBuilder.LimitPlanesData

Start limit plane

startLimitPoint() - Method in interface nxopen.features.FaceBlendBuilder

Returns the start limit point
License requirements: None.

startLoadcase - Variable in class nxopen.cae.Post.Animation

startLocalUpdate() - Method in interface nxopen.Update

Set an update mark.

startLocation() - Method in interface nxopen.die.DrawBeadSegmentBuilder

Returns the start location along the centerline for this segment.

startLocation() - Method in interface nxopen.features.GlobalShapingBuilder

Returns the start location of control curve
License requirements: None.

startLocation - Variable in class nxopen.uf.UFGdt.TargetCylArea

startNextRow(NXObject) - Method in interface nxopen.cam.SurfaceDriveGeometry

Select next row
License requirements: cam_base ("CAM BASE")
.

startNode() - Method in interface nxopen.geometricutilities.NonInflectingLawBuilder

Returns the start node
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

startNode() - Method in interface nxopen.geometricutilities.SShapedLawBuilder

Returns the start node
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

startNodes - Variable in class nxopen.uf.UFSf.AskElementEdgesData

startNormal() - Method in interface nxopen.features.AssociativeLineBuilder

Returns the start normal - point can be passed in SELECT_OBJECT which is used in case of multiple solutions
License requirements: None.

startObject() - Method in interface nxopen.features.BridgeCurveBuilder

Deprecated.

Deprecated in NX8.5.0. Use BridgeCurveBuilderEx instead.

startObject() - Method in interface nxopen.features.BridgeCurveBuilderEx

Returns the start object
License requirements: None.

startObject() - Method in interface nxopen.mechanicalrouting.PathStockPreferenceBuilder

Returns the start object to use for the PathStockPreferenceBuilder.AssignMethod.FROM_START_OBJECT method of stock assignment.

startObject() - Method in interface nxopen.routing.PathStockBuilder

Returns the start object to use for the Routing.PathStockBuilder.AssignMethod#FROM_START_OBJECT method of stock assignment.

startObjectType() - Method in interface nxopen.features.BridgeCurveBuilderEx

Returns the start object type
License requirements: None.

startOfEngageMotionType() - Method in interface nxopen.cam.TurnAvoidanceStartOfEngageBuilder

Returns the start of engage motion type
License requirements: None.

startOfFinishPass() - Method in interface nxopen.cam.TurnRoughFinishTestCut

Returns the start of finish pass
License requirements: cam_base ("CAM BASE")
.

startOffset - Variable in class nxopen.annotations.OrdinateDimension.DoglegPreferences

startOffset() - Method in interface nxopen.AutomaticTraceline

Returns the start offset of the traceline
License requirements: assemblies ("ASSEMBLIES MODULE")
.

startOffset() - Method in interface nxopen.cae.WeldBuilder

Returns the distance of the first point from the beginning of the edge(s)
License requirements: None.

startOffset() - Method in interface nxopen.cam.RoughFinishTurningBuilder

Returns the Start Offset
License requirements: None.

startOffset() - Method in interface nxopen.cam.ThreadTurningBuilder

Returns the Start Offset
License requirements: None.

startOffset() - Method in interface nxopen.features.shipdesign.ExcessMaterialBuilder

Returns the start offset (replaces the legacy offset distance property, and is used for both excess material and fitup)
License requirements: None.

startOffset() - Method in interface nxopen.features.shipdesign.PillarBuilder

Returns the offset used to determine where the support starts (used with nxopen.features.ShipDesign.PillarBuilder.CreationMethod#SPECIFY_LINE and nxopen.features.ShipDesign.PillarBuilder.CreationMethod#SPECIFY_CSYS creation methods).

startOffset() - Method in interface nxopen.features.shipdesign.SteelSupportBuilder

Returns the offset used to determine where the support starts (used with "SpecifyLine" and "SpecifyCsys" creation methods)
License requirements: None.

startOffset() - Method in interface nxopen.geometricutilities.FeatureOffset

Returns the Start Offset
License requirements: None.

startOffset() - Method in interface nxopen.mechatronics.ObjectSourceBuilder

Returns the start offset.

startOffset() - Method in interface nxopen.routing.OverstockBuilder

Returns the start offset value for OverstockBuilder.ApplicationType.INTERVAL method.

startOffsetLock() - Method in interface nxopen.routing.OverstockBuilder

Returns the start offset lock state.

startOfPath() - Method in interface nxopen.cam.BoundaryTurnMemberEvents

Returns the start of part events
License requirements: cam_base ("CAM BASE")
.

startOfPath() - Method in interface nxopen.cam.OperationBuilder

Returns the start event builder
License requirements: None.

startOfPath() - Method in interface nxopen.routing.OverstockApplication

Returns the start control point of the path over which the overstock is applied.

startOfPathBuilder() - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder

Returns the start event builder
License requirements: cam_base ("CAM BASE")
.

startOfSimulation(UFVariant) - Method in interface nxopen.uf.UFSim

Refer to UF_SIM_start_of_simulation for documentation.

startOfTestCut() - Method in interface nxopen.cam.TurnRoughFinishTestCut

Returns the start of test cut
License requirements: cam_base ("CAM BASE")
.

startOrientation() - Method in interface nxopen.die.SteelInsertBuilder

Returns the start orientation of the steelinsert
License requirements: ug_die_design ("Die Design")
.

startParam - Variable in class nxopen.uf.UFCurve.Conic

startParam - Variable in class nxopen.uf.UFCurve.Spline

startParameter() - Method in interface nxopen.features.vehicledesign.CloseRangeBlindVolumeListItemBuilder

Returns the start parameter value on the path curve of the blind volume area.

startParameter - Variable in class nxopen.uf.UFView.VdeData

startParameter - Variable in class nxopen.uf.UFView.VdeDataAndType

startParms - Variable in class nxopen.routing.HealPath.AllData

startPath() - Method in interface nxopen.weld.WeldBeadPathBuilder

Returns the location at which to start the sweep of the bead shape.

startPct - Variable in class nxopen.uf.UFCurve.SectionPerpcrvData

startPercent() - Method in interface nxopen.cam.BladeCutLevels

Returns the start %
License requirements: None.

startPercent - Variable in class nxopen.routing.SegmentManager.SubdivideOption

Start Percentage; 0 <= Start percent < End percent

startPercentage() - Method in interface nxopen.cam.InspectionCurveFeatureBuilder

Returns the start percentage
License requirements: None.

startPercentage() - Method in interface nxopen.cam.InspectionMethodBuilder

Returns the start percentage along the scan
License requirements: None.

startPercentage() - Method in interface nxopen.cam.InspectionScanArcBuilder

Returns the Start Percentage of the Scan Arc
License requirements: None.

startPercentage() - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder

Returns the Start Percentage of the Scan Curve
License requirements: None.

startPercentage() - Method in interface nxopen.cam.InspectionScanCurveBuilder

Returns the Start Percentage of the Scan Curve
License requirements: None.

startPercentage() - Method in interface nxopen.cam.InspectionScanHelixBuilder

Returns the Start Percentage of the Scan Helix
License requirements: None.

startPercentage() - Method in interface nxopen.cam.InspectionScanLineBuilder

Returns the Start Percentage of the Scan Line
License requirements: None.

startPercentage() - Method in interface nxopen.features.PointSetBuilder

Returns the percentage of the curve at which to start creating points.

startPercentage() - Method in interface nxopen.features.SectionCurveBuilder

Returns the start percentage.

startPercentageSection() - Method in interface nxopen.features.PointSetBuilder

Returns a section containing an object (curve, edge, or point) that will be used to determine an intersection with the curves/edges selected for setting the StartPercentage Only used when type is PointSetBuilder.Types.CURVE_POINTS , and when PointSetBuilder.curvePointsBy() is PointSetBuilder.CurvePointsType.EQUAL_ARC_LENGTH , PointSetBuilder.CurvePointsType.EQUAL_PARAMETERS , or PointSetBuilder.CurvePointsType.GEOMETRIC_PROGRESSION .

startPerpendicularFace() - Method in interface nxopen.features.BridgeCurveBuilder

Deprecated.

Deprecated in NX8.5.0. Use BridgeCurveBuilderEx instead.

startPlane() - Method in interface nxopen.die.TrimTaskBuilder

Returns the start plane of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.

startPlane() - Method in interface nxopen.features.sheetmetal.JoggleBuilder

Returns the start plane
License requirements: None.

startPlane() - Method in interface nxopen.features.shipdesign.PillarBuilder

Returns the start plane (only used with nxopen.features.ShipDesign.PillarBuilder.CreationMethod#TWO_PLANESAND_LINES creation method).

startPlane() - Method in interface nxopen.features.shipdesign.PlateChamferBuilder

Returns the start plane
License requirements: None.

startPlane() - Method in interface nxopen.features.shipdesign.SteelSupportBuilder

Returns the start plane (only used with "TwoPlanesandLines" creation method)
License requirements: None.

startPlaneSelected() - Method in interface nxopen.tooling.DieEngTrimTaskBuilder

Returns the start plane selected.

startPoint() - Method in interface nxopen.annotations.LineComponent

Returns the line start point in absolute coordinates.

startPoint() - Method in interface nxopen.annotations.RegionBuilder

Returns the start point Only available when the region type is RegionBuilder.Types.CYLINDRICAL_REGION
License requirements: None.

startPoint() - Method in interface nxopen.AutomaticTraceline

Returns the start point of the traceline
License requirements: assemblies ("ASSEMBLIES MODULE")
.

startPoint() - Method in interface nxopen.cae.LaminateDrapingDataBuilder

Returns the start point
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.

startPoint() - Method in interface nxopen.cae.responsesimulation.ResponseResultsEvaluationSettingBuilder

Returns the start value of domain setting.

startPoint() - Method in interface nxopen.cam.BladeFinish

Returns the Start Point
License requirements: None.

startPoint() - Method in interface nxopen.cam.BlendFinish

Returns the Start Point
License requirements: None.

startPoint() - Method in interface nxopen.cam.FollowGeometryMoveBuilder

Returns the start location
License requirements: None.

startPoint() - Method in interface nxopen.cam.SplitSubopCommand

Returns the start point value
License requirements: None.

startPoint() - Method in interface nxopen.cam.TabPointDataBuilder

Returns the tab start point
License requirements: cam_base ("CAM BASE")
.

startPoint() - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder

Returns the start point
License requirements: None.

startPoint() - Method in interface nxopen.cam.TurnAvoidanceStartBuilder

Returns the start point
License requirements: None.

startPoint() - Method in interface nxopen.die.DrawBeadBuilder

Returns the point location defining the start of the centerline.

startPoint() - Method in interface nxopen.features.AssociativeArcBuilder

Returns the start point - this should be a smart point created using one of PointCollection.createPoint(nxopen.Point3d)
License requirements: None.

startPoint() - Method in interface nxopen.features.AssociativeLineBuilder

Returns the start point - this should be a smart point created using one of PointCollection.createPoint(nxopen.Point3d)
License requirements: None.

startPoint() - Method in interface nxopen.features.GeneralConicBuilder

Returns the start point.

startPoint() - Method in interface nxopen.features.GeodesicLineBuilder

Returns the start point of line
License requirements: None.

startpoint - Variable in class nxopen.features.OffsetCurveBuilder.ComputeOffsetDirectionData

start point of direction

startPoint() - Method in interface nxopen.features.sheetmetal.FlexibleCableBuilder

Returns the start point.

startPoint() - Method in interface nxopen.features.SpineCurveBuilder

Returns the start point
License requirements: None.

startPoint() - Method in interface nxopen.geometricutilities.CurveExtensionBuilder

Returns the point up to which start is extended
License requirements: None.

startPoint() - Method in interface nxopen.geometricutilities.ModlMotion

Returns the start point of ModlMotion.Options.ROTATE_BY_THREE_POINTS motion option.

startPoint() - Method in interface nxopen.geometricutilities.SelectDividingObjectBuilder

Returns the start point
License requirements: None.

startPoint() - Method in interface nxopen.geometricutilities.SplineExtensionBuilder

Returns the point up to which start is extended
License requirements: None.

startPoint() - Method in interface nxopen.Line

Returns the start point of the line
License requirements: None.

startPoint - Variable in class nxopen.routing.EditLineSegmentBuilder.OrientationData

The start of the line.

startPoint - Variable in class nxopen.routing.HealPath.AllData

startPoint - Variable in class nxopen.routing.ISegment.EndPointsData

Location of end 0 in ABS coordinates

startPoint() - Method in interface nxopen.routing.OverstockBuilder

Returns the start point that defines the start of the overstock for OverstockBuilder.ApplicationType.POINT_TO_POINT method.

startPoint - Variable in class nxopen.Section.StartAndDirectionData

The origin of the vector that defines the direction of the section.

startpoint - Variable in class nxopen.Section.StartAndDirectionOfLoopData

The origin of the vector that defines the direction of the loop of the section specified by the index.

startPoint - Variable in class nxopen.SectionElementData.Data

Start point

startPoint - Variable in class nxopen.SectionElementData.SectionElementData1

Start point

startPoint() - Method in interface nxopen.SketchConicBuilder

Returns the start point
License requirements: None.

startPoint() - Method in interface nxopen.tooling.CoolingConnectBuilder

Returns the point for changing the start position of the connecting channel.

startPoint() - Method in interface nxopen.tooling.CoolingDefineChannelBuilder

Returns the point as the start position of the channel.

startPoint - Variable in class nxopen.uf.UFCurve.Line

startPoint - Variable in class nxopen.uf.UFDrf.GetSymbolDividerData

startPoint - Variable in class nxopen.uf.UFGdt.DatumTargetLine

startPoint - Variable in class nxopen.uf.UFGdt.TargetCylArea

startPointCoordinates() - Method in interface nxopen.annotations.ILineTarget

Returns the target start point coordinates
License requirements: None.

startPointDirection() - Method in interface nxopen.features.BridgeCurveBuilder

Deprecated.

Deprecated in NX8.5.0. Use BridgeCurveBuilderEx instead.

startPointMethods() - Method in interface nxopen.features.shipdesign.OrientationRegionItemBuilder

Returns the boundary definition at the start of this region.

startPointMode() - Method in interface nxopen.cam.InspectionUVGridBuilder

Returns the start point mode
License requirements: None.

startPointMode() - Method in interface nxopen.cam.TurnAvoidanceStartBuilder

Returns the start point mode
License requirements: None.

startPointMotionType() - Method in interface nxopen.cam.TurnAvoidanceStartBuilder

Returns the start point motion type
License requirements: None.

startPointOfOverstock() - Method in interface nxopen.routing.OverstockApplication

Returns the start point of overstock on the path.

startPointOptions() - Method in interface nxopen.features.AssociativeArcBuilder

Returns the start point options
License requirements: None.

startPointOptions() - Method in interface nxopen.features.AssociativeLineBuilder

Returns the start point options
License requirements: None.

startPointPoint() - Method in interface nxopen.linedesigner.CreateFenceBuilder

Returns the start point point
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

startPointReference() - Method in interface nxopen.features.AssociativeArcBuilder

Returns the start point reference
License requirements: None.

startPointReference() - Method in interface nxopen.features.AssociativeLineBuilder

Returns the start point reference
License requirements: None.

startPointsEffectDistBuilder() - Method in interface nxopen.cam.NcmSubopBuilder

Returns the region start points effective distance builder (inheritable tool dep)
License requirements: None.

startPointsUseEffectDist() - Method in interface nxopen.cam.NcmSubopBuilder

Returns the start points use effective distance
License requirements: None.

startPort - Variable in class nxopen.routing.Stock.PortsData

Port at the start of the first segment.

startPosition() - Method in interface nxopen.cae.responsesimulation.VelocityImpactParameters

Returns the start position
License requirements: None.

startPosition() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder

Returns the start position
License requirements: None.

startPosition() - Method in interface nxopen.geometricanalysis.sectionanalysis.RadialBuilder

Returns the start position
License requirements: None.

startPosition() - Method in interface nxopen.mechatronics.VirtualAxisBuilder

Returns the initial position of virtual axis
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

startPosition() - Method in interface nxopen.tooling.GeneralInsertBuilder

Returns the start position
License requirements: None.

startPositionMethod() - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder

Returns the start position method
License requirements: None.

startPositionOnGuide() - Method in interface nxopen.features.shipdesign.EdgeCutBuilder

Returns the offset from the start of the guide curve (or start trim object) where cut placement will begin
License requirements: None.

startPositionPoint() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder

Returns the start position point
License requirements: None.

startProfileOriginCurve() - Method in interface nxopen.routing.StockTransitionBuilder

Returns the origin curve of start profile
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

startProfileOriginCurveDirection() - Method in interface nxopen.routing.StockTransitionBuilder

Returns the direction of origin curve of start profile
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

startPt - Variable in class nxopen.uf.UFCurve.Genconic

startPt - Variable in class nxopen.uf.UFSf.EdgeAskEndPointsData

startRadius() - Method in interface nxopen.features.sheetmetal.BridgeTransitionBuilder

Deprecated.

Deprecated in NX10.0.2. Use Expression.setRightHandSide(java.lang.String) on the Expression object returned from Features.SheetMetal.BendOptions#bendRadius instead.

startRadius1() - Method in interface nxopen.features.sheetmetal.BendTaperBuilder

Returns the start radius for side 1
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

startRadius2() - Method in interface nxopen.features.sheetmetal.BendTaperBuilder

Returns the start radius for side 2
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

startRadiusAnalysis() - Method in interface nxopen.geometricanalysis.RadiusAnalysisBuilder

Start radius analysis.

startRayTracedDisplay() - Method in interface nxopen.display.RayTracedStudioBuilder

Start the Ray Traced Studio display after it has been stopped using the Stop action.

startRcp - Variable in class nxopen.routing.ISegment.EndRcpsData

RCP defining start of segment

startRcp - Variable in class nxopen.routing.SBendCorner.SBendData

S-Bend start Control point

startrcp - Variable in class nxopen.routing.SplinePathBuilder.StartAndEndRcpData

Segment Start Rcp.

startReferenceCsys() - Method in interface nxopen.features.AssociativeArcBuilder

Returns the start reference coordinate system
License requirements: None.

startReferenceCsys() - Method in interface nxopen.features.AssociativeLineBuilder

Returns the start reference coordinate system
License requirements: None.

startReferencePoint() - Method in interface nxopen.features.BridgeCurveBuilder

Deprecated.

Deprecated in NX8.5.0. Use BridgeCurveBuilderEx instead.

startReflectionAnalysis() - Method in interface nxopen.geometricanalysis.ReflectionAnalysisBuilder

Start reflection analysis.

startRegion() - Method in interface nxopen.features.sheetmetal.MetaformBuilder

Returns the start region.

startRegionCurve() - Method in interface nxopen.features.sheetmetal.SMBoundaryConditionBuilder

Returns the start region curve This input is required only if the Constraint Type is Features.SheetMetal.SMBoundaryConditionBuilder.ConstraintTypes#CURVE_TO_CURVE or Features.SheetMetal.SMBoundaryConditionBuilder.ConstraintTypes#CURVE_ALONG_CURVE .

startRegionPoint() - Method in interface nxopen.features.sheetmetal.SMBoundaryConditionBuilder

Returns the start region point.

startRevolveAngle() - Method in interface nxopen.cae.AxiSymmetricParameters

Returns the start revolve angle
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

startRow - Variable in class nxopen.uf.UFTabnot.AskMergeInfoData

startSection() - Method in interface nxopen.features.BridgeCurveBuilderEx

Returns the start section
License requirements: None.

startSection() - Method in interface nxopen.features.sheetmetal.LoftedFlangeBuilder

Returns the start section of the lofted flange.

startSectionFile() - Method in interface nxopen.IgesCreator

Returns the start section file - name of the file to provide start section
License requirements: None.

startSectionPoint() - Method in interface nxopen.features.sheetmetal.LoftedFlangeBuilder

Returns the start/end point of the start section.It can be start/end point of the section profile.

startSetbackDis - Variable in class nxopen.uf.UFModl.BlendEdge

startShapeCurve() - Method in interface nxopen.features.SectionSurfaceBuilder

Deprecated.

Deprecated in NX9.0.0. Use SectionSurfaceBuilderEx instead.

startShapeCurve() - Method in interface nxopen.features.SectionSurfaceBuilderEx

Returns the start shape curve.

startSize() - Method in interface nxopen.cae.MeshControlBuilder

Returns the value stored in start size field.

startSketch() - Method in interface nxopen.features.sheetmetal.LoftedFlangeBuilder

Returns the start section sketch as slave.

startSlope() - Method in interface nxopen.features.SectionSurfaceBuilder

Deprecated.

Deprecated in NX9.0.0. Use SectionSurfaceBuilderEx instead.

startSlopeAnalysis() - Method in interface nxopen.geometricanalysis.SlopeAnalysisBuilder

Start slope analysis.

startSlopeCurve() - Method in interface nxopen.features.SectionSurfaceBuilderEx

Returns the start slope curve.

startStation() - Method in interface nxopen.tooling.DirectUnfoldBuilder

Returns the start station.

startStation() - Method in interface nxopen.tooling.IntermediateStageBuilder

Returns the start station.

startStep() - Method in interface nxopen.cam.DmTrimExtend

Returns the start step
License requirements: None.

startStopBeforeBoundaryOffset() - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder

Returns the start and stop before boundary offset status
License requirements: None.

startSurface() - Method in interface nxopen.features.SectionSurfaceBuilder

Deprecated.

Deprecated in NX9.0.0. Use SectionSurfaceBuilderEx instead.

startSurfaceDirectionOption() - Method in interface nxopen.features.BridgeCurveBuilder

Deprecated.

Deprecated in NX8.5.0. Use BridgeCurveBuilderEx instead.

StartSymmetricModelingBuilder - Interface in nxopen.features.subdivision

Represents a StartSymmetricModelingBuilder builder
To create a new instance of this class, use SubdivisionBodyCollection.createStartSymmetricModelingBuilder()

Created in NX9.0.0

StartSymmetricModelingBuilder.MirrorProcedureOption - Class in nxopen.features.subdivision

Deprecated.

Deprecated in NX10.0.0. This enumeration is redundent and hence not necessary.

startTagmag - Variable in class nxopen.uf.UFModl.StycornerCrvOpt

startTangent() - Method in interface nxopen.features.AssociativeArcBuilder

Returns the start tangent - point can be passed in SELECT_OBJECT which is used in case of multiple solutions
License requirements: None.

startTangent() - Method in interface nxopen.features.AssociativeLineBuilder

Returns the start tangent - point can be passed in SELECT_OBJECT which is used in case of multiple solutions
License requirements: None.

startTangent - Variable in class nxopen.uf.UFSf.EdgeAskEndPointsData

startTangentDirection() - Method in interface nxopen.geometricutilities.TransitionCurveBuilder

Returns the start tangent direction
License requirements: None.

startTangentMagnitude() - Method in interface nxopen.features.BridgeCurveBuilder

Deprecated.

Deprecated in NX8.5.0. Use BridgeCurveBuilderEx instead.

startTangentMagnitude() - Method in interface nxopen.geometricutilities.TangentMagnitudeBuilder

Returns the start tangent magnitude
License requirements: None.

startTangentMagnitude() - Method in interface nxopen.geometricutilities.TransitionCurveBuilder

Returns the start tangent magnitude
License requirements: None.

startTaper() - Method in interface nxopen.die.DrawBeadBuilder

Returns the taper definition at the start of the bead.

startTime - Variable in class nxopen.assemblies.ClearanceSet.Summary

The starting time of the last analysis run (in seconds since 00:00:00 1/1/1970.

startTime() - Method in interface nxopen.mechatronics.GanttOperationBuilder

Returns the start time of operation
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

startTime - Variable in class nxopen.uf.UFClear.Summary

startToolAxis() - Method in interface nxopen.cam.FollowGeometryMoveBuilder

Returns the start tool axis
License requirements: None.

startToolAxis - Variable in class nxopen.uf.UFPath.CircularMotion

startToolAxis - Variable in class nxopen.uf.UFPath.HelicalMotion

startTransformation() - Method in interface nxopen.geometricutilities.TransformerData

Sets current coordinate system as reference coordinate system for the transformation.

startTreatmentType() - Method in interface nxopen.features.shipdesign.PillarBuilder

Returns the start treatment type: Endcut or Cap
License requirements: None.

startType() - Method in interface nxopen.features.sheetmetal.MiterOptions

Returns the miter start type.

startType1() - Method in interface nxopen.features.sheetmetal.BendTaperBuilder

Returns the start type for side 1
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

startType2() - Method in interface nxopen.features.sheetmetal.BendTaperBuilder

Returns the start type for side 2
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

startU() - Method in interface nxopen.cam.InspectionUVGridBuilder

Returns the start value in U
License requirements: None.

startUDeg() - Method in interface nxopen.cam.InspectionUVGridBuilder

Returns the start degrees value in U
License requirements: None.

startUdeSet() - Method in interface nxopen.cam.NCGroupBuilder

Returns the start ude set
License requirements: None.

startUdeSet() - Method in interface nxopen.cam.OperationBuilder

Returns the start ude set
License requirements: None.

startUDist() - Method in interface nxopen.cam.InspectionUVGridBuilder

Returns the start distance value in U
License requirements: None.

startUDistance() - Method in interface nxopen.cam.InspectionSurfaceFeatureBuilder

Returns the start distance in the U direction
License requirements: None.

startUMode() - Method in interface nxopen.cam.InspectionUVGridBuilder

Returns the start U mode
License requirements: None.

startUPercent() - Method in interface nxopen.cam.InspectionSurfaceFeatureBuilder

Returns the start percent in the U direction
License requirements: None.

startUSweep() - Method in interface nxopen.cam.InspectionUVGridBuilder

Returns the start sweep value in U
License requirements: None.

startV() - Method in interface nxopen.cam.InspectionUVGridBuilder

Returns the start value in V
License requirements: None.

startValue() - Method in interface nxopen.cae.responsesimulation.FrequencyDefinition

Returns the start value of frequency range.

startValue() - Method in interface nxopen.geometricutilities.CurveExtensionBuilder

Returns the start value
License requirements: None.

startValue() - Method in interface nxopen.geometricutilities.LawBuilder

Returns the start value.

startValue() - Method in interface nxopen.geometricutilities.SplineExtensionBuilder

Returns the start value
License requirements: None.

startValue() - Method in interface nxopen.routing.BranchPathNumberingBuilder

Deprecated.

Deprecated in NX8.5.2. Use Routing.BranchPathNumberingBuilder#startValueForNumbers , Routing.BranchPathNumberingBuilder#startValueForUpperCase , or Routing.BranchPathNumberingBuilder#startValueForLowerCase instead.

startValue() - Method in interface nxopen.tooling.BurringInsertBuilder

Returns the start height value of blank.

startValueForLowerCase() - Method in interface nxopen.routing.BranchPathNumberingBuilder

Returns the start value for lower case alphabet.

startValueForNumbers() - Method in interface nxopen.routing.BranchPathNumberingBuilder

Returns the start value for numbers.

startValueForUpperCase() - Method in interface nxopen.routing.BranchPathNumberingBuilder

Returns the start value for upper case alphabet.

startVDeg() - Method in interface nxopen.cam.InspectionUVGridBuilder

Returns the start degrees value in V
License requirements: None.

startVDist() - Method in interface nxopen.cam.InspectionUVGridBuilder

Returns the start distance value in V
License requirements: None.

startVDistance() - Method in interface nxopen.cam.InspectionSurfaceFeatureBuilder

Returns the start distance n the V direction
License requirements: None.

startVector - Variable in class nxopen.routing.HealPath.AllData

startVector() - Method in interface nxopen.weld.FilletBuilder

Returns the start direction reversed or not.

startVectorI() - Method in interface nxopen.cam.InspectionArcFeatureBuilder

Returns the start vector I component
License requirements: None.

startVectorJ() - Method in interface nxopen.cam.InspectionArcFeatureBuilder

Returns the start vector J component
License requirements: None.

startVectorK() - Method in interface nxopen.cam.InspectionArcFeatureBuilder

Returns the start vector K component
License requirements: None.

startVMode() - Method in interface nxopen.cam.InspectionUVGridBuilder

Returns the start V mode
License requirements: None.

startVPercent() - Method in interface nxopen.cam.InspectionSurfaceFeatureBuilder

Returns the start percent n the V direction
License requirements: None.

startVSweep() - Method in interface nxopen.cam.InspectionUVGridBuilder

Returns the start sweep value in V
License requirements: None.

startXTemplateOffset() - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder

Returns the expression defining the value of the start offset of the template for set 1 (X).

startYTemplateOffset() - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder

Returns the expression defining the value of the start offset of the template for set 2 (Y).

state() - Method in interface nxopen.assemblies.DesignElementBuilder

Returns the state of a design element
License requirements: None.

state() - Method in interface nxopen.drawings.ViewStyleFPCalloutsBuilder

Returns the state toggle on the Callout section of the Flat Pattern tab of the View Style Dialog
License requirements: None.

state() - Method in interface nxopen.drawings.ViewStyleFPCurvesBuilder

Returns the state toggle on the Curve section of the Flat Pattern tab of the View Style Dialog
License requirements: None.

State - Class in nxopen.layer

Represents the state of the layer

state - Variable in class nxopen.layer.StateInfo

The state of the layer

STATE - Static variable in class nxopen.mechatronics.ExpressionBlockBuilder.SlotType

State that is change during runtime based on internal data

state() - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder

Returns the index of the state which is currently displayed in graphic window
License requirements: None.

state() - Method in interface nxopen.tooling.UnfoldingSimulationBuilder

Returns the state
License requirements: None.

State() - Constructor for class nxopen.uf.UFCurve.State

State(int, int, double[]) - Constructor for class nxopen.uf.UFCurve.State

state() - Method in interface nxopen.uistyler.FileOperationData

Returns the state
License requirements: None.

stateCode - Variable in class nxopen.uf.UFCurve.State

StateCollection - Interface in nxopen.layer

Represents a copy of the layer states.

stateIconNameCallback(Tree, Node, int) - Method in interface nxopen.blockstyler.Tree.StateIconNameCallback

Represents the callback which gets called when the node state is set by BlockStyler.Node#setState and the corresponding state icon of node state is not known.

stateIndex - Variable in class nxopen.uf.UFModl.StateInfo

stateIndex - Variable in class nxopen.uf.UFSmd.PipNodeData

StateInfo - Class in nxopen.layer

Used in several methods that get or set the state of a layer

StateInfo() - Constructor for class nxopen.layer.StateInfo

StateInfo(int, State) - Constructor for class nxopen.layer.StateInfo

Constructor for the StateInfo object.

StateInfo() - Constructor for class nxopen.uf.UFModl.StateInfo

StateInfo(double, int) - Constructor for class nxopen.uf.UFModl.StateInfo

STATEMENT - Static variable in class nxopen.PrintBuilder.PaperSize

Statement, 5 1/2- by 8 1/2-inches

states - Variable in class nxopen.features.shipdesign.PenetrationUtils.Verify_penetrationsData

states - Variable in class nxopen.uf.UFCurve.CreateSplineData

states - Variable in class nxopen.uf.UFCurve.FixSplineData

states - Variable in class nxopen.uf.UFCurve.SmoothSplineData

states - Variable in class nxopen.uf.UFCurve.SmoothSplineDataStData

states - Variable in class nxopen.uf.UFModlGeneral.CreateBsurfaceData

states - Variable in class nxopen.uf.UFModlGeneral.FixBsurfaceData

states - Variable in class nxopen.uf.UFModlGeneral.SmoothBsurfaceData

STATIC - Static variable in class nxopen.assemblies.DegreesOfFreedomStatus

The point or direction is well defined.

STATIC - Static variable in class nxopen.cae.BaseIteration.IterationType

Static Analysis Iteration

STATIC - Static variable in class nxopen.cae.responsesimulation.RSEvent.Type

STATIC - Static variable in class nxopen.cae.Result.SolutionType

Static

STATIC - Static variable in class nxopen.cae.SimBcPlotContoursBuilder.PlotType

Static plot

STATIC - Static variable in class nxopen.cae.SimLoadSet.Type

Static load set.

STATIC - Static variable in class nxopen.geometricanalysis.GeometricProperties.OutputType

Propeties of the selected entities are displayed in the information window.

STATIC - Static variable in class nxopen.motion.MotionSolutionBuilder.AnalysisTypes

Static analysis

STATIC_DYNAMIC_SOLVER - Static variable in class nxopen.uf.UFMotion.Solver

STATIC_LOAD - Static variable in class nxopen.cae.responsesimulation.ExcitationBuilder.ExcitationLocationType

STATIC_NORMAL - Static variable in class nxopen.assemblies.DegreesOfFreedomStatus

The direction represents a normal to two translational degrees of freedom.

STATIC_PRESSURE - Static variable in class nxopen.cae.Result.Quantity

STATIC_RADIUS - Static variable in class nxopen.features.vehicledesign.DynamicCurbBuilder.WheelType

STATIC_RADIUS - Static variable in class nxopen.features.vehicledesign.GroundClearanceBuilder.WheelType

STATIC_RADIUS - Static variable in class nxopen.features.vehicledesign.InnerAngleBuilder.WheelSizeType

STATIC_RADIUS - Static variable in class nxopen.features.vehicledesign.SlopeBuilder.WheelSizeType

STATIC_RADIUS - Static variable in class nxopen.features.vehicledesign.WheelFixingBuilder.WheelSizeType

STATIC_WIREFRAME - Static variable in class nxopen.preferences.ViewVisualizationVisual.RenderingStyle

STATIC_WIREFRAME - Static variable in class nxopen.View.RenderingStyleType

STATIC_WIREFRAME_STYLE - Static variable in class nxopen.uf.UFView.RenderingStyle

staticAnalysis() - Method in interface nxopen.motion.MotionSolutionBuilder

Returns the Static Analysis option
License requirements: None.

staticAntialiasing() - Method in interface nxopen.display.RayTracedStudioEditorBuilder

Returns the Ray Traced Studio static image antialiasing quality
License requirements: None.

staticCoefficient() - Method in interface nxopen.motion.BodyContactAdams

Deprecated.

Deprecated in NX8.0.0. Obtion the exression using BodyContactAdams.staticCoefficientExpression() to query or edit it.

staticCoefficient() - Method in interface nxopen.motion.BodyContactLms

Returns the static coefficient
License requirements: None.

staticCoefficient() - Method in interface nxopen.motion.BodyContactRecurdyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using BodyContactRecurdyn.staticCoefficientExpression() to query or edit it.

staticCoefficient() - Method in interface nxopen.motion.CurveContactAdams

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using CurveContactAdams.staticCoefficientExpression() to query or edit it.

staticCoefficient() - Method in interface nxopen.motion.CurveContactRecurdyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using CurveContactRecurdyn.staticCoefficientExpression() to query or edit it.

staticCoefficientExpression() - Method in interface nxopen.motion.BodyContactAdams

Returns the static coefficient expression
License requirements: None.

staticCoefficientExpression() - Method in interface nxopen.motion.BodyContactRecurdyn

Returns the coulomb coefficient expression
License requirements: None.

staticCoefficientExpression() - Method in interface nxopen.motion.CurveContactAdams

Returns the static coefficient expression
License requirements: None.

staticCoefficientExpression() - Method in interface nxopen.motion.CurveContactRecurdyn

Returns the static coefficient expression
License requirements: None.

StaticCurb - Interface in nxopen.features.vehicledesign

Represents a static curb feature
To create or edit an instance of this class, use StaticCurbBuilder

Created in NX8.5.0

StaticCurbBuilder - Interface in nxopen.features.vehicledesign

Represents a StaticCurb builder used to create or edit static curb feature
To create a new instance of this class, use VehicleDesignCollection.createStaticCurbBuilder(nxopen.features.vehicledesign.StaticCurb)
Default values.

StaticCurbBuilder.PositionType - Class in nxopen.features.vehicledesign

Represents the static curb positions.

StaticCurbBuilder.RequirementsControlType - Class in nxopen.features.vehicledesign

Represents the requirements control types to define the static curb.

StaticCurbBuilder.VisualizationType - Class in nxopen.features.vehicledesign

Represents the visualization types of the output.

staticEqu() - Method in interface nxopen.motion.JointFrictionAdams

Returns the static equ
License requirements: mechanisms ("MECHANISMS")
.

staticEqu() - Method in interface nxopen.motion.JointFrictionRecurDyn

Returns the static equ
License requirements: mechanisms ("MECHANISMS")
.

staticErrorTolerance() - Method in interface nxopen.motion.RecurdynSolverProperty

Deprecated.

Deprecated in NX8.5.0. Obtion the expression using RecurdynSolverProperty.dynamicNumericalDampingExpression() to query or edit it.

staticErrorToleranceExpression() - Method in interface nxopen.motion.RecurdynSolverProperty

Returns the static error tolerance expression
License requirements: None.

staticFinalGatherQuality() - Method in interface nxopen.display.GlobalIlluminationBuilder

Returns the static final gather quality affects Ray Traced Studio static (still) image rendering
License requirements: None.

staticForceTolerance() - Method in interface nxopen.motion.LmsSolverProperty

Returns the static force tolerance
License requirements: None.

staticFriction() - Method in interface nxopen.mechatronics.CollisionMaterialBuilder

Returns the static friction.

staticFriction() - Method in interface nxopen.mechatronics.PreferencesBuilder

Deprecated.

Deprecated in NX9.0.0. Use PreferencesBuilder.staticFrictionExpression() instead

staticFriction - Variable in class nxopen.uf.UFMotion.ContactParameters

staticFrictionExpression() - Method in interface nxopen.mechatronics.PreferencesBuilder

Returns the static Friction Expression
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

staticHold() - Method in interface nxopen.motion.TirePropertyAdvancedParameters

Returns the static hold.

staticHold() - Method in interface nxopen.motion.TirePropertyCdBuilder

Returns the static hold
License requirements: None.

staticHold() - Method in interface nxopen.motion.TirePropertyFtBuilder

Returns the static hold.

staticHold() - Method in interface nxopen.motion.TirePropertyNonInertialBuilder

Returns the static hold.

staticHold() - Method in interface nxopen.motion.TirePropertyTnoBuilder

Returns the static hold.

staticInitialStepSize() - Method in interface nxopen.motion.RecurdynSolverProperty

Deprecated.

Deprecated in NX8.5.0. Obtion the expression using RecurdynSolverProperty.staticInitialStepSizeExpression() to query or edit it.

staticInitialStepSizeExpression() - Method in interface nxopen.motion.RecurdynSolverProperty

Returns the static initial step size expression
License requirements: None.

staticIntegratorType() - Method in interface nxopen.motion.RecurdynSolverProperty

Returns the integrator type
License requirements: None.

staticIRayPlusStudioTime() - Method in interface nxopen.display.IRayPlusStudioEditorBuilder

Returns the Ray Traced Studio static display time-based rendering timer (read only)
License requirements: studio_render ("UG STUDIO RENDER")
.

staticJacobianType() - Method in interface nxopen.motion.LmsSolverProperty

Returns the static jacobian type
License requirements: None.

StaticLoadExcitation - Interface in nxopen.cae.responsesimulation

Represents an excitation of static load type
To create or edit an instance of this class, use StaticLoadExcitationBuilder

Created in NX6.0.0

StaticLoadExcitationBuilder - Interface in nxopen.cae.responsesimulation

Represents the manager to StaticLoadExcitation .

staticMaxIteration() - Method in interface nxopen.motion.RecurdynSolverProperty

Returns the static max iteration
License requirements: None.

staticMaxStepSize() - Method in interface nxopen.motion.RecurdynSolverProperty

Deprecated.

Deprecated in NX8.5.0. Obtion the expression using RecurdynSolverProperty.staticMaxStepSizeExpression() to query or edit it.

staticMaxStepSizeExpression() - Method in interface nxopen.motion.RecurdynSolverProperty

Returns the static max step size expression
License requirements: None.

staticOffset() - Method in interface nxopen.cae.DurabilityTransientEventBuilder

Returns the static offset for the event.

staticQuasiIteration() - Method in interface nxopen.motion.LmsSolverProperty

Returns the static quasi iteration
License requirements: None.

staticRadius() - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder

Returns the static radius of wheel.

staticRadius() - Method in interface nxopen.features.vehicledesign.BaseDataWheelBuilder

Returns the static radius of the wheel.

staticRadius() - Method in interface nxopen.motion.TirePropertyCdBuilder

Returns the static radius
License requirements: None.

staticRadius() - Method in interface nxopen.motion.TirePropertyTnoBuilder

Returns the Static Radius.

staticRayTracedStudioQuality() - Method in interface nxopen.display.RayTracedStudioEditorBuilder

Returns the Ray Traced Studio static image quality
License requirements: None.

staticRayTracedStudioRenderDepth() - Method in interface nxopen.display.RayTracedStudioEditorBuilder

Returns the Ray Traced Studio static image render depth, controls the iterations of ray tracing reflection and refraction calculations
License requirements: None.

staticSolutionTolerance() - Method in interface nxopen.motion.LmsSolverProperty

Returns the static solution tolerance
License requirements: None.

staticStability() - Method in interface nxopen.motion.RecurdynSolverProperty

Deprecated.

Deprecated in NX8.5.0. Obtion the expression using RecurdynSolverProperty.staticStabilityExpression() to query or edit it.

staticStabilityExpression() - Method in interface nxopen.motion.RecurdynSolverProperty

Returns the static stability expression
License requirements: None.

staticStepSize() - Method in interface nxopen.motion.LmsSolverProperty

Returns the static step size
License requirements: None.

staticVerticalStiffness() - Method in interface nxopen.motion.TirePropertyCdBuilder

Returns the static vertical stiffness
License requirements: None.

staticVerticalStiffness() - Method in interface nxopen.motion.TirePropertyFtBuilder

Returns the static vertical stiffness.

staticVerticalStiffness() - Method in interface nxopen.motion.TirePropertyTnoBuilder

Returns the static vertical stiffness.

STATION - Static variable in class nxopen.linedesigner.CreateFactoryElementBuilder.TypeAPI

Represents the Station type

STATION - Static variable in class nxopen.linedesigner.DBFactoryNode.NodeType

STATIONARY - Static variable in class nxopen.cae.AutomaticMorphBuilder.OrphanNodeMovementType

Stationary in topologically modified region.

STATIONARY - Static variable in class nxopen.cae.ManualMorphBuilder.MapType

stationary mapping

STATIONARY - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ProcessActionBinder

The process action for binder is stationary.

STATIONARY - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ProcessActionDie

The process action for die is stationary.

STATIONARY - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ProcessActionPunch

The process action for punch is stationary.

STATIONARY_AND_PARTING_FACE - Static variable in class nxopen.features.DraftBuilder.DraftReferencesMethods

Draft from stationary face to parting face.

STATIONARY_FACE - Static variable in class nxopen.features.DraftBuilder.DraftReferencesMethods

Draft from stationary face.

stationaryAntialiasing() - Method in interface nxopen.display.RayTracedStudioEditorBuilder

Returns the Ray Traced Studio stationary antialiasing quality when dynamic interaction stops
License requirements: None.

stationaryEdgesAboveParting() - Method in interface nxopen.features.DraftBodyBuilder

Returns the stationary edges above parting
License requirements: None.

stationaryEdgesBelowParting() - Method in interface nxopen.features.DraftBodyBuilder

Returns the stationary edges below parting
License requirements: None.

stationaryEntity() - Method in interface nxopen.features.DraftBuilder

Deprecated.

Deprecated in NX8.5.0. Use Features.DraftBuilder#stationaryReference instead. Note that this API cannot be used together with the new API.

stationaryEntity() - Method in interface nxopen.features.sheetmetal.BendTaperBuilder

Returns the stationary entity, can be an edge or a face.

stationaryFace() - Method in interface nxopen.features.CoaxialBuilder

Returns the stationary face
License requirements: None.

stationaryFace() - Method in interface nxopen.features.CoplanarBuilder

Returns the stationary face
License requirements: None.

stationaryFace() - Method in interface nxopen.features.MakeOffsetBuilder

Returns the stationary face
License requirements: None.

stationaryFace() - Method in interface nxopen.features.ParallelBuilder

Returns the stationary face.

stationaryFace() - Method in interface nxopen.features.PerpendicularBuilder

Returns the stationary face
License requirements: None.

stationaryFace() - Method in interface nxopen.features.sheetmetal.FlatSolidBuilder

Returns the stationary face selection
License requirements: None.

stationaryFace() - Method in interface nxopen.features.sheetmetal.MigratedPanelBuilder

Returns the parent stationary face.

stationaryFace() - Method in interface nxopen.features.SymmetricBuilder

Returns the stationary face.

stationaryFace() - Method in interface nxopen.features.TangentBuilder

Returns the stationary face
License requirements: None.

stationaryFace() - Method in interface nxopen.tooling.BlankGeneratorBuilder

Returns the face used to create a blank.

stationaryFace() - Method in interface nxopen.tooling.InitProjBuilder

Returns the planar faces assigned as stationary face of strip
License requirements: None.

stationaryFinalGatherQuality() - Method in interface nxopen.display.GlobalIlluminationBuilder

Returns the stationary final gather quality affects Ray Traced Studio rendering when dynamic operations stop
License requirements: None.

stationaryPartingReference() - Method in interface nxopen.features.DraftBuilder

Returns the stationary parting reference as SC Collector containing only faces or only one datum plane or only one point Note that DraftBuilder.StationaryPartingReference and DraftBuilder.PartingReference refer to the same collector.

stationaryQuality() - Method in interface nxopen.display.RayTracedStudioBuilder

Returns the Ray Traced Studio stationary display quality when dynamic interaction stops
License requirements: None.

stationaryRadius() - Method in interface nxopen.features.sheetmetal.JoggleSideOptionsBuilder

Returns the stationary radius
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.

stationaryRayTracedStudioQuality() - Method in interface nxopen.display.RayTracedStudioEditorBuilder

Returns the Ray Traced Studio stationary display quality when dynamic interaction stops
License requirements: None.

stationaryRayTracedStudioshowStatusIndicator() - Method in interface nxopen.display.RayTracedStudioEditorBuilder

Returns the stationary Ray Traced Studio progess status indicator percent complete display
License requirements: None.

stationaryReference() - Method in interface nxopen.features.DraftBuilder

Returns the stationary reference as SC Collector containing only faces or only one datum plane or only one point
License requirements: None.

stationDistance() - Method in interface nxopen.tooling.LayoutManagementBuilder

Returns the station distance of engineering die
License requirements: None.

stationEnum() - Method in interface nxopen.tooling.LayoutManagementBuilder

Returns the station number definition of engineering die
License requirements: None.

stationInformation() - Method in interface nxopen.tooling.StripLayoutStationInformationBuilder

Returns the station information which will be added into specified strip
License requirements: None.

stationLocation() - Method in interface nxopen.linedesigner.ConveyorStationFeatureBuilder

Returns the station location
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

stationName() - Method in interface nxopen.linedesigner.ConveyorStationFeatureBuilder

Returns the stattion name
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

stationNameStr() - Method in interface nxopen.tooling.LayoutManagementBuilder

Returns the station name definition of engineering die
License requirements: None.

stationNumber() - Method in interface nxopen.tooling.LayoutManagementBuilder

Returns the total station number of engineering die layout
License requirements: None.

stationNumber() - Method in interface nxopen.tooling.StripLayoutStationInformationBuilder

Returns the station number to define information
License requirements: None.

stationsNo() - Method in interface nxopen.tooling.QuickQuotationBuilder

Returns the stations no.

stationType() - Method in interface nxopen.linedesigner.ConveyorStationFeatureBuilder

Returns the station type
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

STATISTICAL - Static variable in class nxopen.uf.UFGdt.ModifierTypes

statisticalTolerance() - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder

Returns the statistical tolerance toggle
License requirements: None.

statisticalType() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder

Returns the statistical enum
License requirements: None.

statistics - Variable in class nxopen.uf.UFModeling.AskMassProps3dData

statSide - Variable in class nxopen.uf.UFModl.SmbendCornerData

statSide - Variable in class nxopen.uf.UFModl.SmbendCylinderData

statSide - Variable in class nxopen.uf.UFModl.SmbendData

stature - Variable in class nxopen.features.HumanBuilder.StatureData

Stature value

StatureData() - Constructor for class nxopen.features.HumanBuilder.StatureData

statureOption() - Method in interface nxopen.HumanData

Returns the stature type for stature value
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

statureType - Variable in class nxopen.features.HumanBuilder.StatureData

Flag for percentile stature in database or actual stature measure

statureUnit - Variable in class nxopen.features.HumanBuilder.StatureData

Unit for stature

statureValue() - Method in interface nxopen.HumanData

Returns the stature value
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

status() - Method in interface nxopen.cae.connections.Element

Returns the status of the element
License requirements: nx_masterfem ("Finite Element Modeling")
.

status - Variable in class nxopen.cae.optimization.TBSOptimizationSolution.JA_CAE_OPT_SOL_get_result

status() - Method in interface nxopen.cam.BoundaryTurnMemberFineFinishOffset

Returns the fine finish offset status
License requirements: None.

status() - Method in interface nxopen.cam.CAMFeature

Returns the update status of the CAMFeature
License requirements: None.

status() - Method in interface nxopen.cam.ExtendAtEdges

Returns the extend at edges toggle
License requirements: None.

status() - Method in interface nxopen.cam.FeatureGeometryGroup

Returns the update status of the feature group
License requirements: None.

status() - Method in interface nxopen.cam.InPathEventDataBuilder

Returns the in path event output status
License requirements: cam_base ("CAM BASE")
.

status() - Method in interface nxopen.cam.MinCutDepth

Returns the Minimum Cut Depth status
License requirements: None.

status() - Method in interface nxopen.cam.MinCutLength

Returns the status of Minimum Cut Length
License requirements: None.

status() - Method in interface nxopen.features.SketchConversionStatus

Returns the status of conversion of a feature to an independent sketch.

status() - Method in interface nxopen.features.vehicledesign.CloseRangeBlindVolumeListItemBuilder

Returns the indication if the measured length of blind volume area is acceptable or not.

status - Variable in class nxopen.geometricanalysis.GeometricProperties.CaeCurvePropertiesData

Return status

status - Variable in class nxopen.geometricanalysis.GeometricProperties.CaeFacePropertiesData

Return status

status - Variable in class nxopen.geometricanalysis.GeometricProperties.EdgePropertiesData

Return status

status - Variable in class nxopen.geometricanalysis.GeometricProperties.FacePropertiesData

Return status

status() - Method in interface nxopen.issue.IssueContent

Returns the issue status
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.

status() - Method in interface nxopen.issue.IssueContentBuilder

Returns the issue status
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.

status - Variable in class nxopen.Part.FeatureUpdateStatus

status of the feature (e.g.

status - Variable in class nxopen.PartCollection.SetDisplayData

Returns OK if the work part could be maintained, or a status code indicating the reason

status - Variable in class nxopen.RuleManager.InitializeData

Status from initializing RuleManager

status - Variable in class nxopen.Sketch.StatusData

The sketch's status, which indicates how well constrained the sketch is

status - Variable in class nxopen.uf.UFAssem.AskCompExplosionData

status - Variable in class nxopen.uf.UFCurve.CreateJoinedCurveData

status - Variable in class nxopen.uf.UFCurve.CreateJoinedFeatureData

status - Variable in class nxopen.uf.UFModeling.AskMaxCurvatureData

status - Variable in class nxopen.uf.UFModl.BlendPointData

status - Variable in class nxopen.uf.UFModl.EdgeBlendSet

status - Variable in class nxopen.uf.UFModl.EdgeBlendSetbackData

status - Variable in class nxopen.uf.UFModl.EdgeBlendStopshortData

Status() - Constructor for class nxopen.uf.UFOper.Status

Status(int, int, int, int) - Constructor for class nxopen.uf.UFOper.Status

status - Variable in class nxopen.uf.UFSket.AskDimStatusData

status - Variable in class nxopen.uf.UFTrns.CreateCsysMappingMatrixData

status - Variable in class nxopen.uf.UFTrns.CreateReflectionMatrixData

status - Variable in class nxopen.uf.UFTrns.CreateRotationMatrixData

status - Variable in class nxopen.uf.UFTrns.CreateScalingMatrixData

status - Variable in class nxopen.uf.UFTrns.TransformObjectsData

status - Variable in class nxopen.uf.UFUgmgr.ValidateAlternatePartIdData

status - Variable in class nxopen.uf.UFUgmgr.ValidatePartRevData

status - Variable in class nxopen.uf.UFView.AskZClipData

status - Variable in class nxopen.userdefinedobjects.UserDefinedObject.LinkDefinition

status of the linked object

status - Variable in class nxopen.userdefinedobjects.UserDefinedObjectManager.LinkedUdoDefinition

status() - Method in interface nxopen.validate.ResultObject

Returns the error status of check result
License requirements: None.

Status1() - Constructor for class nxopen.uf.UFOper.Status1

Status1(int, int, int) - Constructor for class nxopen.uf.UFOper.Status1

STATUS_DAMAGE - Static variable in class nxopen.cae.Result.Quantity

statusControl() - Method in interface nxopen.cam.WedmStatusControlCiBuilder

Returns the Wedm Status Control Type
License requirements: None.

StatusData() - Constructor for class nxopen.Sketch.StatusData

statuses - Variable in class nxopen.uf.UFAssem.UpgradeStatus

statuses - Variable in class nxopen.uf.UFClone.NamingFailures

statuses - Variable in class nxopen.uf.UFPart.LoadStatus

StatusInfo() - Constructor for class nxopen.cae.IMeshManager.StatusInfo

StatusInfo(int, int, int) - Constructor for class nxopen.cae.IMeshManager.StatusInfo

Constructor for the StatusInfo object.

StatusInfo() - Constructor for class nxopen.uf.UFLayer.StatusInfo

StatusInfo(int, int) - Constructor for class nxopen.uf.UFLayer.StatusInfo

statusOfPlatformCeilingHeightUpdation() - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder

Returns the platform ceiling height updation status
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

statusOfPlatformElevationUpdation() - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder

Returns the platform elevation updation status
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

statusOfPlatformHeightUpdation() - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder

Returns the platform height updation status
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

statusOfPlatformSupportDefaultFromCeilingToggleUpdation() - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder

Returns the platform supportDefaultFromCeilingToggle updation status
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

statusOfPlatformSupportOptionUpdation() - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder

Returns the platform supportOption updation status
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

statusOfPlatformThicknessUpdation() - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder

Returns the platform thickness updation status
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

STBD_FR_OUT_CTR - Static variable in class nxopen.features.shipdesign.ThicknessDirectionBuilder.ThicknessDirectionType

Direction is Starboard, From Reference, Outside or Centered.

STD - Static variable in class nxopen.cam.GrooveToolBuilder.InsertShapes

Standard groove tool

std() - Method in interface nxopen.UFSession

STD_LASER - Static variable in class nxopen.cam.Tool.Subtypes

Standard Laser tool

stdAddUserSets() - Method in interface nxopen.tooling.ValidCheckBuilder

Adds standard part into user defined set
License requirements: solid_modeling ("SOLIDS MODELING")
.

stdLoadFile() - Method in interface nxopen.tooling.ValidCheckBuilder

Loads standard attribute list
License requirements: solid_modeling ("SOLIDS MODELING")
.

STEADY_STATE - Static variable in class nxopen.motion.TirePropertyTnoBuilder.DynamicsType

STEEL - Static variable in class nxopen.die.TrimLineDevelopmentBuilder.MaterialTypeName

Steel

STEEL - Static variable in class nxopen.tooling.DirectUnfoldBuilder.MatType

Default is steel.

STEEL_FEATURE - Static variable in class nxopen.features.shipdesign.ProfileCutoutBuilder.CollarPlateCreationApproaches

Steel feature approach - User Collar Plate to create collar plate

steelBodies() - Method in interface nxopen.features.shipdesign.SteelDistributionBuilder

Returns the steel bodies
License requirements: None.

SteelCollarPlate - Interface in nxopen.features.shipdesign

Represents a collar plate steel feature
To create or edit an instance of this class, use SteelCollarPlateBuilder

Created in NX7.5.0

SteelCollarPlateBuilder - Interface in nxopen.features.shipdesign

Represents a SteelCollarPlate builder
To create a new instance of this class, use ShipCollection.createSteelCollarPlateBuilder(nxopen.features.shipdesign.SteelCollarPlate)
Default values.

steelComponents() - Method in interface nxopen.features.shipdesign.ManufacturingPreparationBuilder

Returns the design elements to prepare for manufacturing.

SteelDistribution - Interface in nxopen.features.shipdesign

Represents a steel distribution feature
To create or edit an instance of this class, use SteelDistributionBuilder

Created in NX5.0.0

SteelDistributionBuilder - Interface in nxopen.features.shipdesign

Represents a SteelDistribution builder
To create a new instance of this class, use ShipCollection.createSteelDistributionBuilder(nxopen.features.Feature)

Created in NX5.0.0

SteelDistributionBuilder.SaForm - Class in nxopen.features.shipdesign

Sa Form

SteelDistributionBuilder.SaMaterial - Class in nxopen.features.shipdesign

Sa Material

SteelDistributionBuilder.SaName - Class in nxopen.features.shipdesign

Sa Name

SteelDistributionBuilder.SaSize - Class in nxopen.features.shipdesign

Sa Size

SteelDistributionBuilder.SaType - Class in nxopen.features.shipdesign

Sa Type

steelFaces() - Method in interface nxopen.features.shipdesign.SteelInsulationBuilder

Returns the collection of faces to be insulated.

SteelFeatureSpreadsheetBuilder - Interface in nxopen.features.shipdesign

Represents a SteelFeatureSpreadsheetBuilder builder.

steelFeatureType() - Method in interface nxopen.features.shipdesign.SteelFeatureSpreadsheetBuilder

Returns the steel feature type (eg: Profile, Edge Reinforcement, etc)
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.

steelinsert(Feature) - Method in interface nxopen.die.DieCollection

Creates/Edits the steel insert feature builder.

SteelInsertBuilder - Interface in nxopen.die

Represents a Steel Insert feature builder.

SteelInsertBuilder.HoleGridOrientationData - Class in nxopen.die

This class holds the data returned from SteelInsertBuilder.getHoleGridOrientation()

SteelInsertBuilder.InsertTypeOption - Class in nxopen.die

Settings for the insert type.

SteelInsertBuilder.MainProfileData - Class in nxopen.die

This class holds the data returned from SteelInsertBuilder.getMainProfile()

SteelInsertSectionBuilder - Interface in nxopen.die

Represents a Steel Insert Section sub feature.

SteelInsertSectionBuilder.ExtensionTypeOption - Class in nxopen.die

Settings for the extension type.

SteelInsertSectionBuilder.FormingAttributesData - Class in nxopen.die

This class holds the data returned from SteelInsertSectionBuilder.getFormingAttributes()

SteelInsertSegmentChildBuilder - Interface in nxopen.die

Represents a Steel Insert Segment Child sub feature.

SteelInsertSegmentChildBuilder.ExtensionTypeOption - Class in nxopen.die

Settings for the extension type.

SteelInsertSegmentChildBuilder.InsertTypeOption - Class in nxopen.die

Settings for the insert type.

SteelInsertSegmentParentBuilder - Interface in nxopen.die

Represents a Steel Insert Segment Parent sub feature.

SteelInsertSegmentParentBuilder.ExtensionTypeOption - Class in nxopen.die

Settings for the extension type.

SteelInsertSegmentParentBuilder.InsertTypeOption - Class in nxopen.die

Settings for the insert type.

SteelInsulation - Interface in nxopen.features.shipdesign

Represents a steel insulation feature.

SteelInsulationBoundaryBuilder - Interface in nxopen.features.shipdesign

Represents a Steel Insulation Boundary builder.

SteelInsulationBoundaryBuilderList - Interface in nxopen.features.shipdesign

Represents a list of objects.

SteelInsulationBuilder - Interface in nxopen.features.shipdesign

Represents a builder that is used to create or edit a SteelInsulation feature.

SteelSupport - Interface in nxopen.features.shipdesign

Represents a steel support feature
To create or edit an instance of this class, use SteelSupportBuilder

Created in NX7.5.0

SteelSupportBuilder - Interface in nxopen.features.shipdesign

Represents a SteelSupport builder
To create a new instance of this class, use ShipCollection.createSteelSupportBuilder(nxopen.features.shipdesign.SteelSupport)
Default values.

SteelSupportBuilder.CapOptions - Class in nxopen.features.shipdesign

Does this feature have end caps, and if so what kind?

SteelSupportBuilder.CreationMethod - Class in nxopen.features.shipdesign

Method used to create the support feature

SteelVentHoles - Interface in nxopen.features.shipdesign

Represents a ship vent holes feature
To create or edit an instance of this class, use SteelVentHolesBuilder

Created in NX7.5.0

SteelVentHolesBuilder - Interface in nxopen.features.shipdesign

Represents a SteelVentHoles builder
To create a new instance of this class, use ShipCollection.createSteelVentHolesBuilder(nxopen.features.shipdesign.SteelVentHoles)
Default values.

STEEP - Static variable in class nxopen.cam.CutRegionsBuilder.CutRegionsContainmentTypes

Steep

STEEP - Static variable in class nxopen.cam.EditSubopCommand.ContainmentTypes

Steep

STEEP - Static variable in class nxopen.cam.SurfaceRegions.CreateRegionsTypes

steep

STEEP - Static variable in class nxopen.cam.SurfaceRegions.FeatureTypes

type to steep

STEEP - Static variable in class nxopen.uf.UFSurfReg.Type

STEEP_AND_NON_STEEP - Static variable in class nxopen.cam.SurfaceRegions.CreateRegionsTypes

steep and non-steep

STEEP_AND_NONSTEEP - Static variable in class nxopen.cam.DmAmBuilder.SteepOptTypes

STEEP_AREA - Static variable in class nxopen.cam.SurfaceContourBuilder.CleanupTypes

STEEP_CONTAIN_NONE - Static variable in class nxopen.cam.DmAmBuilder.SteepOptTypes

STEEP_DIRECTIONAL - Static variable in class nxopen.cam.DmAmBuilder.SteepOptTypes

STEEP_FIRST - Static variable in class nxopen.cam.Sequence.Types

STEEP First

STEEP_FLANKED_BEVEL - Static variable in class nxopen.annotations.Symbol

Specifies steeep flanked bevel butt weld symbol ( ISO and DIN only)

STEEP_FLANKED_BEVEL_BUTT - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSymbolType

STEEP_FLANKED_V - Static variable in class nxopen.annotations.Symbol

Specifies steep flanked V butt weld symbol (ISO and DIN only)

STEEP_FLANKED_VBUTT - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSymbolType

STEEP_LAST - Static variable in class nxopen.cam.Sequence.Types

STEEP Last

STEEP_ONLY - Static variable in class nxopen.cam.RoughTurningBuilder.CleanupTypes

Cleanup mode: Steep only

STEEP_ONLY - Static variable in class nxopen.cam.SteepContainment.Types

Steep Only

steepAngle() - Method in interface nxopen.cam.CleanupSettings

Returns the builder of Steep Angle, Cleanup Geometry Settings
License requirements: None.

steepAngle() - Method in interface nxopen.cam.DmAmBuilder

Returns the steep angle
License requirements: None.

steepAngleBuilder() - Method in interface nxopen.cam.FlowBuilder

Returns the Steep Angle
License requirements: None.

steepAreas() - Method in interface nxopen.cam.CleanupSettings

Returns the Steep Areas, Cleanup Geometry Settings
License requirements: cam_base ("CAM BASE")
.

steepBody() - Method in interface nxopen.cam.SurfaceRegions

Returns the steep body
License requirements: None.

steepContainment() - Method in interface nxopen.cam.MillCutParameters

Returns the steep containment
License requirements: None.

SteepContainment - Interface in nxopen.cam

Represents a SteepContainment
Created in NX6.0.0

SteepContainment.Types - Class in nxopen.cam

Available types for steep containment

steepCutDirection() - Method in interface nxopen.cam.FlowCutSteepContainment

Returns the Steep Cut Direct
License requirements: None.

steepCutting() - Method in interface nxopen.cam.DmAmBuilder

Returns the Steep Cutting Builder
License requirements: None.

steepCutting() - Method in interface nxopen.cam.FlowBuilder

Returns the Steep Cutting Builder
License requirements: None.

STEEPEST_DESCENT - Static variable in class nxopen.cae.ModelUpdateOptimOptionsBuilder.MethodChoice

Steepest Descent method

steepestDescDVarStep() - Method in interface nxopen.cae.ModelUpdateOptimOptionsBuilder

Returns the steepest descent design variable step
License requirements: None.

steepestDescMaxInnerIter() - Method in interface nxopen.cae.ModelUpdateOptimOptionsBuilder

Returns the steepest descent max inner iterations
License requirements: None.

steepestDescMethod() - Method in interface nxopen.cae.ModelUpdateOptimOptionsBuilder

Returns the steepest descent method
License requirements: None.

steepMergeDistance() - Method in interface nxopen.cam.CleanupOutput

Returns the builder of Steep Merge, Cleanup Geometry Output
License requirements: None.

steepOverlapAngle() - Method in interface nxopen.cam.DmAmBuilder

Returns the Steep Overlap Angle
License requirements: None.

steepOverlapDistance() - Method in interface nxopen.cam.CleanupOutput

Returns the builder of Steep Overlap, Cleanup Geometry Output
License requirements: None.

steepOverlapDistance() - Method in interface nxopen.cam.DmAmBuilder

Returns the Steep Overlap Distance
License requirements: None.

steepOverlapOption() - Method in interface nxopen.cam.DmAmBuilder

Returns the Steep Overlap Option
License requirements: None.

steepOverlapType() - Method in interface nxopen.cam.DmAmBuilder

Returns the Steep Overlap Type
License requirements: None.

steeringWheelCenterPoint() - Method in interface nxopen.features.vehicledesign.BaseDataDriverBuilder

Returns the center point of the driver steering wheel.

steeringWheelCenterPointActive() - Method in interface nxopen.features.vehicledesign.BaseDataDriverBuilder

Returns the status to indicate whether the steering wheel center point is active or not.

stemTop() - Method in interface nxopen.cam.InspectionProbeTrackingBuilder

Returns the stem top
License requirements: None.

stemTop() - Method in interface nxopen.cam.ProbeTrackingBuilder

Returns the stem top
License requirements: None.

stencilPreview() - Method in interface nxopen.display.DecalBuilder

Returns the stencil preview toggle
License requirements: None.

STEP - Static variable in class nxopen.blockstyler.Wizard.TaskNavigatorItem

step() - Method in interface nxopen.die.ThroatChildBuilder

Returns the step to be applied at the end of the tangent extension of the flange
License requirements: ug_die_design ("Die Design")
.

step() - Method in interface nxopen.die.ThroatParentBuilder

Returns the step to be applied at the end of the tangential extension of the flange
License requirements: ug_die_design ("Die Design")
.

Step - Interface in nxopen.features

Represents a step feature
To create or edit an instance of this class, use StepBuilder

Created in NX10.0.0

step() - Method in interface nxopen.motion.MotionSolutionBuilder

Returns the step
License requirements: None.

STEP - Static variable in class nxopen.tooling.DieCavityAndSlugHoleBuilder.CavityTypeItems

the step type

STEP - Static variable in class nxopen.tooling.PiercingInsertBuilder.NormalCavityType

the step type

STEP - Static variable in class nxopen.tooling.SpecialPiercingInsertBuilder.NormalCavityType

the step type

step(UFVariant, String) - Method in interface nxopen.uf.UFSim

Refer to UF_SIM_step for documentation.

Step203Creator - Interface in nxopen

Deprecated.

Deprecated in NX11.0.0. Use StepCreator instead.

Step203Creator.EntityNameOption - Class in nxopen

Deprecated.

Entity Name Option

Step203Creator.ExportFromOption - Class in nxopen

Deprecated.

Create the builder

Step203Creator.ExternalReferenceStructureOption - Class in nxopen

Deprecated.

External Reference Structure As Option

Step203Importer - Interface in nxopen

Represents a Step203Importer to be used when importing the STEP203 Data This class is created using DexManager .

Step203Importer.ImportToOption - Class in nxopen

Create the builder

Step214Creator - Interface in nxopen

Deprecated.

Deprecated in NX11.0.0. Use StepCreator instead.

Step214Creator.EntityNameOption - Class in nxopen

Deprecated.

Entitiy Name Option

Step214Creator.ExportFromOption - Class in nxopen

Deprecated.

Export From Option

Step214Creator.ExternalReferenceStructureOption - Class in nxopen

Deprecated.

External Reference Structure As Option

Step214Importer - Interface in nxopen

Represents a Step214Importer to be used when importing the STEP214 Data This class is created using DexManager .

Step214Importer.ImportToOption - Class in nxopen

Create the builder

Step242Importer - Interface in nxopen

Represents a Step242Importer to be used when importing STEP242 Data This class is created using DexManager .

Step242Importer.MessageEnum - Class in nxopen

Messages output when opening the file.

STEP_EXPORT_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId

STEP_EXPORT_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId

STEP_FACE - Static variable in class nxopen.annotations.HoleTableSettingsFormatBuilder.DepthMeasurementDatumType

STEP_FROM_END - Static variable in class nxopen.features.ShelfBuilder.LengthMethods

STEP_IN - Static variable in class nxopen.sim.IsvControlPanelBuilder.SingleStepModeType

Step In

STEP_INFO - Static variable in class nxopen.uf.UFSf.ScenarioInfo

STEP_OUT - Static variable in class nxopen.sim.IsvControlPanelBuilder.SingleStepModeType

Step Out

STEP_OVER - Static variable in class nxopen.sim.IsvControlPanelBuilder.SingleStepModeType

Step Over

stepAhead() - Method in interface nxopen.cam.PlungeMillingBuilder

Returns the step ahead distance builder (inheritable tool dependent double)
License requirements: None.

stepAhead() - Method in interface nxopen.cam.TrochoidalSettings

Returns the trochoidal path stepover distance
License requirements: None.

stepAngle() - Method in interface nxopen.features.SectionCurveBuilder

Returns the step angle
License requirements: None.

stepAngle - Variable in class nxopen.uf.UFCurve.AskIsoclineData

stepAngle - Variable in class nxopen.uf.UFCurve.SectionRadialData

stepAngleBuilder() - Method in interface nxopen.cam.RoughFinishTurningBuilder

Returns the Step Angle
License requirements: None.

stepArticulation(int) - Method in interface nxopen.uf.UFMotion

Refer to UF_MOTION_step_articulation for documentation.

stepAskLbcDescValidNx(Tag, Tag) - Method in interface nxopen.uf.UFSfl

Refer to UF_SFL_step_ask_lbc_desc_valid_nx for documentation.

stepAskNameNx(Tag) - Method in interface nxopen.uf.UFSf

Refer to UF_SF_step_ask_name_nx for documentation.

stepAskPropertyByIndexNx(Tag, int) - Method in interface nxopen.uf.UFSf

Refer to UF_SF_step_ask_property_by_index_nx for documentation.

stepAskPropertyCountNx(Tag) - Method in interface nxopen.uf.UFSf

Refer to UF_SF_step_ask_property_count_nx for documentation.

stepAskPropertyNx(Tag, String) - Method in interface nxopen.uf.UFSf

Refer to UF_SF_step_ask_property_nx for documentation.

stepBackward() - Method in interface nxopen.geometricutilities.PlayButtonsBuilder

TODO: fill in a description for this
License requirements: None.

stepBackward() - Method in interface nxopen.motion.AnimationControl

Animation step backward
License requirements: mechanisms ("MECHANISMS")
.

stepBackward() - Method in interface nxopen.motion.SpreadsheetRunControl

SpreadsheetRun step backward
License requirements: mechanisms ("MECHANISMS")
.

stepBackward() - Method in interface nxopen.tooling.UnfoldingSimulationBuilder

Step backward of animation
License requirements: None.

stepBlendRadiusDim1() - Method in interface nxopen.features.StepBuilder

Returns the step blend radius dimension 1
License requirements: None.

stepBlendRadiusDim2() - Method in interface nxopen.features.StepBuilder

Returns the step blend radius dimension 2
License requirements: None.

StepBuilder - Interface in nxopen.features

Represents a Step builder
To create a new instance of this class, use AeroCollection.createStepBuilder(nxopen.features.Step)
Default values.

StepBuilder.DepthMethods - Class in nxopen.features

Represents face operations applied to the motion face

StepBuilder.ReferenceBoundaryTypes - Class in nxopen.features

Represents selected type as reference boundary object

StepBuilder.StepFaceMethods - Class in nxopen.features

Represents face operations applied to the step face

StepBuilder.StepTypes - Class in nxopen.features

Represents the step feature type

StepBuilder.StepWallMethods - Class in nxopen.features

Represents face operation applied to the step wall face

stepClearance() - Method in interface nxopen.cam.Cycle

Returns the step clearance
License requirements: None.

stepClearanceStatus() - Method in interface nxopen.cam.Cycle

Returns the step clearance status
License requirements: None.

stepCount() - Method in interface nxopen.cae.SimSolution

Returns the number of steps
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

stepCount() - Method in interface nxopen.features.MeshTransformerBuilder

Returns the step count value used in the transformation or morphing calculations
License requirements: None.

StepCreator - Interface in nxopen

Represents a StepCreator to be used when exporting the STEP Data This class is created using DexManager .

StepCreator.EntityNameOption - Class in nxopen

Entity Name Option

StepCreator.ExportAsOption - Class in nxopen

Export As option

StepCreator.ExportFromOption - Class in nxopen

Create the builder

StepCreator.ExternalReferenceStructureOption - Class in nxopen

External Reference Structure As Option

stepDepthDim() - Method in interface nxopen.features.StepBuilder

Returns the step depth dimension
License requirements: None.

stepDescriptorAskNameNx(Tag) - Method in interface nxopen.uf.UFSfl

Refer to UF_SFL_step_descriptor_ask_name_nx for documentation.

stepDir - Variable in class nxopen.uf.UFDraw.AskFoldedSxlineData

stepDir - Variable in class nxopen.uf.UFDraw.AskHalfSxlineData

stepDir - Variable in class nxopen.uf.UFDraw.AskRevolvedSxlineData

stepDir - Variable in class nxopen.uf.UFDraw.AskSimpleSxlineData

stepDir - Variable in class nxopen.uf.UFDraw.AskSteppedSxlineData

stepDir - Variable in class nxopen.uf.UFDraw.AskUnfoldedSxlineData

stepDistance() - Method in interface nxopen.die.ThroatChildBuilder

Returns the step distance to add at the end of the tangent extension.

stepDistance() - Method in interface nxopen.features.SectionCurveBuilder

Returns the step distance
License requirements: None.

stepDistance() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

Returns the distance between sections used in the analysis
License requirements: None.

stepDistance - Variable in class nxopen.uf.UFCurve.SectionParallelData

stepExpression() - Method in interface nxopen.features.FreeTransformerBuilder

Returns the expression that defines the step count used in the transformation or morphing calculations
License requirements: None.

stepFaceMethod1() - Method in interface nxopen.features.StepBuilder

Returns the step face method 1
License requirements: None.

stepFaceMethod2() - Method in interface nxopen.features.StepBuilder

Returns the step face method 2
License requirements: None.

stepFirst() - Method in interface nxopen.motion.AnimationControl

Animation step to first step
License requirements: mechanisms ("MECHANISMS")
.

stepForward() - Method in interface nxopen.geometricutilities.PlayButtonsBuilder

TODO: fill in a description for this
License requirements: None.

stepForward() - Method in interface nxopen.motion.AnimationControl

Animation step forward
License requirements: mechanisms ("MECHANISMS")
.

stepForward() - Method in interface nxopen.motion.SpreadsheetRunControl

SpreadsheetRun step forward
License requirements: mechanisms ("MECHANISMS")
.

stepForward() - Method in interface nxopen.tooling.UnfoldingSimulationBuilder

Step animation forward
License requirements: None.

stepIntol() - Method in interface nxopen.cam.DmStreamlineCutStep

Returns the step Intol which defines the inner tolerance
License requirements: None.

stepIntol() - Method in interface nxopen.cam.DPMItpBuilder

Deprecated.

Deprecated in NX10.0.1. Use DmStreamlineCutStep.stepIntol() instead.

stepIntolBuilder() - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder

Returns the builder of cut step intol
License requirements: None.

stepIntolBuilder() - Method in interface nxopen.cam.DmSurfBuilder

Returns the builder of SDM: Cut Step Intol
License requirements: None.

stepLast() - Method in interface nxopen.motion.AnimationControl

Animation step to last step
License requirements: mechanisms ("MECHANISMS")
.

StepManager - Interface in nxopen.cae

Represents StepManager
To create a new instance of this class, use SimSimulation.createStepManager(nxopen.cae.SimSolution)

Created in NX10.0.0

stepMethod() - Method in interface nxopen.cam.DPMItpBuilder

Deprecated.

Deprecated in NX10.0.1. Use DmStreamlineCutStep.cutStepType() and DmStreamlineCutStep.setCutStepType(nxopen.cam.DPMItpBuilder.StepMethodOption) instead.

stepMethod() - Method in interface nxopen.cam.MultiDepthCut

Returns the Multi-Depth Cut, Step Method
License requirements: None.

stepMethod1() - Method in interface nxopen.features.ShelfBuilder

Returns the step method1
License requirements: None.

stepMethod2() - Method in interface nxopen.features.ShelfBuilder

Returns the step method2
License requirements: None.

stepMove(double) - Method in interface nxopen.features.subdivision.CageManipulatorData

Moves the objects by step value.

stepNotifyPostCallback(Wizard, int) - Method in interface nxopen.blockstyler.Wizard.StepNotifyPostCallback

The StepNotifyPost callback notifies a client after navigating to the next step in the Wizard.

stepNotifyPreCallback(Wizard, int) - Method in interface nxopen.blockstyler.Wizard.StepNotifyPreCallback

The StepNotifyPre callback notifies a client before navigating to the next step in the Wizard.

stepOption() - Method in interface nxopen.features.AdmMoveFaceBuilder

Returns the step option behavior.

stepOption() - Method in interface nxopen.features.OffsetSurfaceBuilder

Returns the offset surface allow step boundaries option.

stepOption() - Method in interface nxopen.geometricutilities.StepOptionBehavior

Returns the step option
License requirements: None.

StepOptionBehavior - Interface in nxopen.geometricutilities

Represents a StepOptionBehavior It provides several step options for controlling behavior when move face and so on.

StepOptionBehavior.StepOptionType - Class in nxopen.geometricutilities

Step Faec options

stepOutol() - Method in interface nxopen.cam.DmStreamlineCutStep

Returns the step Outol which defines the outer tolerance
License requirements: None.

stepOuttol() - Method in interface nxopen.cam.DPMItpBuilder

Deprecated.

Deprecated in NX10.0.1. Use DmStreamlineCutStep.stepOutol() instead.

stepOuttolBuilder() - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder

Returns the builder of cut step outol
License requirements: None.

stepOuttolBuilder() - Method in interface nxopen.cam.DmSurfBuilder

Returns the builder of SDM: Cut Step Outol
License requirements: None.

stepover() - Method in interface nxopen.cam.AreaMillingContainment

Returns the builder of area milling stepover
License requirements: None.

stepover() - Method in interface nxopen.cam.BladeRough

Returns the Stepover builder
License requirements: None.

stepover() - Method in interface nxopen.cam.BlendFinish

Returns the Stepover builder
License requirements: None.

STEPOVER - Static variable in class nxopen.cam.CamOperationMotionType

STEPOVER - Static variable in class nxopen.cam.CamPathMotionType

STEPOVER - Static variable in class nxopen.cam.DmAmBuilder.AmCutTraversalTypes

Zig with Stepover

STEPOVER - Static variable in class nxopen.cam.DmBndBuilder.BndCutTraversalTypes

Zig with Stepover

stepover() - Method in interface nxopen.cam.FlowCutSteepContainment

Returns the builder of flow cut stepover
License requirements: None.

stepover() - Method in interface nxopen.cam.HubFinish

Returns the Stepover builder
License requirements: None.

stepover() - Method in interface nxopen.cam.MillCutParameters

Returns the stepover
License requirements: None.

STEPOVER - Static variable in class nxopen.cam.MoveBuilder.Motion

Stepover

STEPOVER - Static variable in class nxopen.cam.NcmTransferBuilder.LongMotionTypes

stepover smooth motion type

stepover() - Method in interface nxopen.cam.PathDisplayColors

Returns the color stepover
License requirements: None.

stepover() - Method in interface nxopen.cam.RoughTurningBuilder

Returns the Stepover
License requirements: None.

stepoverBuilder() - Method in interface nxopen.cam.DmAmBuilder

Returns the stepover builder
License requirements: None.

stepoverBuilder() - Method in interface nxopen.cam.DmBndBuilder

Returns the stepover builder
License requirements: None.

stepoverBuilder() - Method in interface nxopen.cam.DmSurfBuilder

Returns the builder of stepover
License requirements: None.

stepoverBuilder() - Method in interface nxopen.cam.DPMItpBuilder

Returns the stepover builder
License requirements: None.

StepoverBuilder - Interface in nxopen.cam

Represents a Stepover Builder .

stepoverBuilder() - Method in interface nxopen.cam.WedmBasedGeomBuilder

Returns the Stepover builder
License requirements: None.

StepoverBuilder.ApplyTypes - Class in nxopen.cam

apply on part options .

StepoverBuilder.StepoverTypes - Class in nxopen.cam

stepover options .

stepoverDis() - Method in interface nxopen.cam.DPMItpBuilder

Returns the stepover distance
License requirements: cam_base ("CAM BASE")
.

stepoverDistance - Variable in class nxopen.uf.UFModl.RoughOffset

stepoverLift() - Method in interface nxopen.cam.SurfaceContourBuilder

Returns the stepover lift
License requirements: None.

stepoverLimit() - Method in interface nxopen.cam.MillCutParameters

Returns the Stepover Limit
License requirements: None.

stepoverNum() - Method in interface nxopen.cam.DPMItpBuilder

Returns the stepover number
License requirements: cam_base ("CAM BASE")
.

stepoverPercentBuilder() - Method in interface nxopen.cam.DmRadBuilder

Returns the Tool Diameter, Stepover for the Radial Cut method.

STEPOVERS - Static variable in class nxopen.cam.CutBand.Types

Stepovers

stepoverScallopBuilder() - Method in interface nxopen.cam.DmRadBuilder

Returns the builder of Scallop Height.

stepoverScallopHeight() - Method in interface nxopen.cam.DPMItpBuilder

Returns the stepover scallop height
License requirements: cam_base ("CAM BASE")
.

stepoverType() - Method in interface nxopen.cam.DPMItpBuilder

Returns the stepover type
License requirements: cam_base ("CAM BASE")
.

stepoverType() - Method in interface nxopen.cam.StepoverBuilder

Returns the stepover type
License requirements: None.

stepoverTypeType() - Method in interface nxopen.cam.WedmStepoverBuilder

Returns the stepover item type
License requirements: None.

stepParamsBuilder() - Method in interface nxopen.cam.DrillStepToolBuilder

Returns the step params builder
License requirements: cam_base ("CAM BASE")
.

StepParamsBuilder - Interface in nxopen.cam

Represents a StepParams Builder .

StepParamsBuilder.Data - Class in nxopen.cam

This class holds the data returned from StepParamsBuilder.get(int)

STEPPED - Static variable in class nxopen.geometricanalysis.DeviationGaugeBuilder.ColorPlotTypes

Stepped

STEPPED_HOLE_FEATURE - Static variable in class nxopen.uf.UFGdt.FeatureType

STEPPED_PRESSURE - Static variable in class nxopen.features.shipdesign.RollingLineBuilder.Types

Create a saw tooth set of curves on the surface where the tangential for each line is constant on intersecting plane sections.

STEPPED_SHAFT_FEATURE - Static variable in class nxopen.uf.UFGdt.FeatureType

STEPPED_SXLINE - Static variable in class nxopen.uf.UFDraw.SxlineType

SteppedSectionLine - Interface in nxopen.drawings

A Simple or Stepped Section Line.

SteppedSectionLineBuilder - Interface in nxopen.drawings

Deprecated.

Deprecated in NX10.0.0. Use Drawings.SectionViewBuilder#sectionViewType instead.

stepPp - Variable in class nxopen.uf.UFSf.AskStepNxData

stepRampDim1() - Method in interface nxopen.features.StepBuilder

Returns the step ramp dimension 1
License requirements: None.

stepRampDim2() - Method in interface nxopen.features.StepBuilder

Returns the step ramp dimension 2
License requirements: None.

stepRetract() - Method in interface nxopen.cam.Cycle

Returns the step retract
License requirements: None.

steps - Variable in class nxopen.uf.UFAssem.AskStepsData

steps - Variable in class nxopen.uf.UFAssem.AskStepsOfPartOccData

stepSetNameNx(Tag, Tag, String) - Method in interface nxopen.uf.UFSf

Refer to UF_SF_step_set_name_nx for documentation.

stepSize() - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder

Returns the extract step size
License requirements: None.

stepSize() - Method in interface nxopen.cam.InspectionMethodBuilder

Returns the scan step size
License requirements: None.

stepSize() - Method in interface nxopen.cam.InspectionScanArcBuilder

Returns the builder for step size
License requirements: None.

stepSize() - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder

Returns the builder for step size
License requirements: None.

stepSize() - Method in interface nxopen.cam.InspectionScanCurveBuilder

Returns the builder for step size
License requirements: None.

stepSize() - Method in interface nxopen.cam.InspectionScanHelixBuilder

Returns the builder for step size
License requirements: None.

stepSize() - Method in interface nxopen.cam.InspectionScanLineBuilder

Returns the builder for step sizee
License requirements: None.

stepSize() - Method in interface nxopen.die.SpringbackCompensationBuilder

Returns the step size.

stepStatusAsString() - Method in interface nxopen.blockstyler.BodyCollector

Returns the StepStatus as string
License requirements: None.

stepStatusAsString() - Method in interface nxopen.blockstyler.CurveCollector

Returns the StepStatus as string
License requirements: None.

stepStatusAsString() - Method in interface nxopen.blockstyler.FaceCollector

Returns the StepStatus as string
License requirements: None.

stepStatusAsString() - Method in interface nxopen.blockstyler.SectionBuilder

Returns the StepStatus as string
License requirements: None.

stepStatusAsString() - Method in interface nxopen.blockstyler.SelectElement

Returns the StepStatus as string
License requirements: None.

stepStatusAsString() - Method in interface nxopen.blockstyler.SelectFeature

Returns the StepStatus as string
License requirements: None.

stepStatusAsString() - Method in interface nxopen.blockstyler.SelectNode

Returns the StepStatus as string
License requirements: None.

stepStatusAsString() - Method in interface nxopen.blockstyler.SelectObject

Returns the StepStatus as string
License requirements: None.

stepStatusAsString() - Method in interface nxopen.blockstyler.SpecifyAxis

Returns the StepStatus as string
License requirements: None.

stepStatusAsString() - Method in interface nxopen.blockstyler.SpecifyCSYS

Returns the StepStatus as string
License requirements: None.

stepStatusAsString() - Method in interface nxopen.blockstyler.SpecifyLocation

Returns the StepStatus as string
License requirements: None.

stepStatusAsString() - Method in interface nxopen.blockstyler.SpecifyPlane

Returns the string specifying the default StepStatus
License requirements: None.

stepStatusAsString() - Method in interface nxopen.blockstyler.SpecifyPoint

Returns the StepStatus as string
License requirements: None.

stepStatusAsString() - Method in interface nxopen.blockstyler.SpecifyVector

Returns the StepStatus as string
License requirements: None.

stepStatusAsString() - Method in interface nxopen.blockstyler.SuperPoint

Returns the StepStatus as string
License requirements: None.

stepStatusAsString() - Method in interface nxopen.blockstyler.SuperSection

Returns the StepStatus as string
License requirements: None.

stepTime() - Method in interface nxopen.mechatronics.PreferencesBuilder

Deprecated.

Deprecated in NX9.0.0. Use PreferencesBuilder.stepTimeExpression() instead

stepTimeExpression() - Method in interface nxopen.mechatronics.PreferencesBuilder

Returns the Step Time Expression
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

stepTo(int) - Method in interface nxopen.motion.AnimationControl

Animation step to a special step
License requirements: mechanisms ("MECHANISMS")
.

stepTo(int) - Method in interface nxopen.motion.SpreadsheetRunControl

SpreadsheetRun step to special step
License requirements: mechanisms ("MECHANISMS")
.

stepToAssemblyPosition() - Method in interface nxopen.motion.AnimationControl

Animation step to assembly position
License requirements: mechanisms ("MECHANISMS")
.

stepToAssemblyPosition() - Method in interface nxopen.motion.ArticulationControl

Articulation to assembly position
License requirements: mechanisms ("MECHANISMS")
.

stepToAssemblyPosition() - Method in interface nxopen.motion.SpreadsheetRunControl

SpreadsheetRun to assembly position
License requirements: mechanisms ("MECHANISMS")
.

stepToDesignPosition() - Method in interface nxopen.motion.AnimationControl

Animation step to design position
License requirements: mechanisms ("MECHANISMS")
.

stepToDesignPosition() - Method in interface nxopen.motion.ArticulationControl

Articulation to design position
License requirements: mechanisms ("MECHANISMS")
.

stepToDesignPosition() - Method in interface nxopen.motion.SpreadsheetRunControl

SpreadsheetRun to design position
License requirements: mechanisms ("MECHANISMS")
.

stepToNextOperation() - Method in interface nxopen.sim.IsvControlPanelBuilder

Simulation Control Panel: Step to Next Operation
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

stepToPreviousOperation() - Method in interface nxopen.sim.IsvControlPanelBuilder

Simulation Control Panel: Step to Previous Operation
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

stepType() - Method in interface nxopen.cae.SimSolutionStep

Returns the step type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

stepType() - Method in interface nxopen.features.StepBuilder

Returns the step type
License requirements: None.

stepUp() - Method in interface nxopen.cam.PlungeMillingBuilder

Returns the step up customizable item builder
License requirements: None.

StepUpBuilder - Interface in nxopen.cam

Represents a StepUp Builder .

stepValue() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder

Returns the step value to control the accurate for demo cylinder visibility and blind volume area calculation.

stepWallBlendRadiusDim1() - Method in interface nxopen.features.StepBuilder

Returns the step wall blend radius dimension 1
License requirements: None.

stepWallBlendRadiusDim2() - Method in interface nxopen.features.StepBuilder

Returns the step wall blend radius dimension 2
License requirements: None.

stepWallMethod1() - Method in interface nxopen.features.StepBuilder

Returns the step wall method 1
License requirements: None.

stepWallMethod2() - Method in interface nxopen.features.StepBuilder

Returns the step wall method 2
License requirements: None.

stepWallRampDim1() - Method in interface nxopen.features.StepBuilder

Returns the step wall ramp dimension 1
License requirements: None.

stepWallRampDim2() - Method in interface nxopen.features.StepBuilder

Returns the step wall ramp dimension 2
License requirements: None.

stepWallThickDim1() - Method in interface nxopen.features.StepBuilder

Returns the step wall thickness dimension 1
License requirements: None.

stepWallThickDim2() - Method in interface nxopen.features.StepBuilder

Returns the step wall thickness dimension 2
License requirements: None.

stickCollision() - Method in interface nxopen.mechatronics.CollisionBodyBuilder

Returns the option for stick when collision.

stickyFactor() - Method in interface nxopen.mechatronics.PreferencesBuilder

Deprecated.

Deprecated in NX11.0.0. Use PreferencesBuilder.stickyForce() instead.

stickyForce() - Method in interface nxopen.mechatronics.PreferencesBuilder

Returns the sticky factor Expression
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

STICTION - Static variable in class nxopen.motion.JointFrictionAdams.FrictionEffect

STICTION - Static variable in class nxopen.motion.JointFrictionRecurDyn.FrictionEffect

stictionTransitionVelocity() - Method in interface nxopen.motion.JointFrictionAdams

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using Motion.JointFrictionAdams#stictionTransitionVelocityExpression to query or edit it.

stictionTransitionVelocity() - Method in interface nxopen.motion.JointFrictionRecurDyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using Motion.JointFrictionRecurDyn#stictionTransitionVelocityExpression to query or edit it.

stictionTransitionVelocityExpression() - Method in interface nxopen.motion.JointFrictionAdams

Returns the stiction transition velocity expression
License requirements: None.

stictionTransitionVelocityExpression() - Method in interface nxopen.motion.JointFrictionRecurDyn

Returns the stiction transition_velocity expression
License requirements: None.

stictionVelocity() - Method in interface nxopen.motion.BodyContactAdams

Deprecated.

Deprecated in NX8.0.0. Obtion the exression using BodyContactAdams.stictionVelocityExpression() to query or edit it.

stictionVelocity() - Method in interface nxopen.motion.BodyContactLms

Returns the stiction velocity
License requirements: None.

stictionVelocity() - Method in interface nxopen.motion.BodyContactRecurdyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using BodyContactRecurdyn.stictionVelocityExpression() to query or edit it.

stictionVelocityExpression() - Method in interface nxopen.motion.BodyContactAdams

Returns the stiction velocity expression
License requirements: None.

stictionVelocityExpression() - Method in interface nxopen.motion.BodyContactRecurdyn

Returns the stiction velocity expression
License requirements: None.

Stiffener - Interface in nxopen.features.shipdesign

Represents a stiffener feature
To create or edit an instance of this class, use StiffenerBuilder

Created in NX8.0.0

STIFFENER - Static variable in class nxopen.features.shipdesign.StiffenerBuilder.Types

Stiffener type

STIFFENER_BY_SUPPORT - Static variable in class nxopen.features.shipdesign.StiffenerBuilder.Types

Stiffener By Support type

STIFFENER_BY_SUPPORT_DIVIDE - Static variable in class nxopen.features.shipdesign.ShipPreparationInfo.Types

The data represents a stiffener divide feature, for a stiffener by support.

STIFFENER_DIVIDE - Static variable in class nxopen.features.shipdesign.ShipPreparationInfo.Types

The data represents a stiffener divide feature.

STIFFENER_SYSTEM - Static variable in class nxopen.features.shipdesign.ShipDesignPreferencesBuilder.Types

Stiffener System type

STIFFENER_SYSTEM - Static variable in class nxopen.features.shipdesign.ShipnamesBuilderType

StiffenerBuilder - Interface in nxopen.features.shipdesign

Represents a Stiffener builder
To create a new instance of this class, use ShipCollection.createStiffenerBuilder(nxopen.features.shipdesign.Stiffener)
Default values.

StiffenerBuilder.AttachmentOption - Class in nxopen.features.shipdesign

The stiffener attachment plate option

StiffenerBuilder.CreatePathData - Class in nxopen.features.shipdesign

This class holds the data returned from StiffenerBuilder.createPath()

StiffenerBuilder.EdgeReinforcementAlignmentMethod - Class in nxopen.features.shipdesign

the edge reinforcement alignment method

StiffenerBuilder.EdgeReinforcementPlacementMethods - Class in nxopen.features.shipdesign

The edge reinforcement placement method

StiffenerBuilder.EndCutTypes - Class in nxopen.features.shipdesign

this specifies how the end cuts are applied

StiffenerBuilder.KnuckleOptions - Class in nxopen.features.shipdesign

the knuckle option

StiffenerBuilder.MountingMethods - Class in nxopen.features.shipdesign

the mounting method offset type

StiffenerBuilder.OrientationMethod - Class in nxopen.features.shipdesign

The stiffener orientation method

StiffenerBuilder.Types - Class in nxopen.features.shipdesign

the feature type: Stiffener or Edge Reinforcement

stiffenerBySupportMethod() - Method in interface nxopen.features.shipdesign.StiffenerBySupportPathBuilder

Returns the stiffener by support path method
License requirements: None.

StiffenerBySupportPathBuilder - Interface in nxopen.features.shipdesign

This class defines the builder to collect stiffener by support path data for Stiffener feature.

StiffenerBySupportPathBuilder.AlignedTo - Class in nxopen.features.shipdesign

Which face the stiffener is aligned to

StiffenerBySupportPathBuilder.Method - Class in nxopen.features.shipdesign

Type of Stiffener by Support Method

StiffenerBySupportPathBuilder.Scenario - Class in nxopen.features.shipdesign

Scenarios of Stiffener by Support

StiffenerBySupportPathBuilder.SetBackMethod - Class in nxopen.features.shipdesign

Type of set back method

stiffenerBySupportPathData() - Method in interface nxopen.features.shipdesign.StiffenerBuilder

Returns the path data used to define the support information of the stiffener.

stiffenerBySupportPathData() - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder

Returns the path data used to define the support information of the stiffener.

StiffenerLimitBuilder - Interface in nxopen.features.shipdesign

This class defines the path limit method used by a Stiffener or Edge Reinforcement feature.

StiffenerLimitBuilder.LimitType - Class in nxopen.features.shipdesign

Path limiting method

stiffenerStock() - Method in interface nxopen.features.shipdesign.EditStockBuilder

Returns the stock data used to define the stock information of the stiffener.

StiffenerStockBuilder - Interface in nxopen.features.shipdesign

This class defines the Profile or Plate stock for a Stiffener or Edge Reinforcement feature.

StiffenerStockBuilder.StockSectionType - Class in nxopen.features.shipdesign

Type of Stiffener/Edge Reinforcement stock: Profile or Plate

StiffenerSystem - Interface in nxopen.features.shipdesign

Represents a stiffener system feature.

StiffenerSystemBuilder - Interface in nxopen.features.shipdesign

This class is used to create or edit a StiffenerSystem feature.

StiffenerSystemBuilder.EndCutTypes - Class in nxopen.features.shipdesign

Used to specify the type of end cut to be used at the extreme ends of the stiffener system.

StiffenerSystemBuilder.MeasureAlongModes - Class in nxopen.features.shipdesign

Used to specify how the spacing and offset is to be measured.

StiffenerSystemBuilder.MountingMethods - Class in nxopen.features.shipdesign

the mounting method offset type

StiffenerSystemBuilder.OffsetSpacingModes - Class in nxopen.features.shipdesign

Used to specify if a single or double offset and spacing definition is to be used.

StiffenerSystemBuilder.OrientationMethods - Class in nxopen.features.shipdesign

Used to specify the type of reference to use for specifying the orientation of the stiffener system.

StiffenerSystemBuilder.PointMethods - Class in nxopen.features.shipdesign

Used to specify whether points or planes are being used for the points definition.

StiffenerSystemBuilder.Types - Class in nxopen.features.shipdesign

Used to specify how the path of the stiffener system is defined.

stiffness() - Method in interface nxopen.motion.BodyContactAdams

Deprecated.

Deprecated in NX8.0.0. Obtion the exression using BodyContactAdams.stiffnessExpression() to query or edit it.

stiffness() - Method in interface nxopen.motion.BodyContactLms

Returns the stiffness
License requirements: None.

stiffness() - Method in interface nxopen.motion.BodyContactRecurdyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using BodyContactRecurdyn.stiffnessExpression() to query or edit it.

STIFFNESS - Static variable in class nxopen.motion.BushingCylindricalCoefficientTypes

stiffness type

stiffness() - Method in interface nxopen.motion.CurveContactAdams

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using CurveContactAdams.stiffnessExpression() to query or edit it.

stiffness() - Method in interface nxopen.motion.CurveContactRecurdyn

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using CurveContactRecurdyn.stiffnessExpression() to query or edit it.

stiffness() - Method in interface nxopen.motion.NormalModeProperty

Returns the stiffness of the normal mode
License requirements: mechanisms ("MECHANISMS")
.

stiffness() - Method in interface nxopen.motion.SpringBuilder

Deprecated.

Deprecated in NX8.0.0. Obtain the expression using Motion.SpringBuilder#stiffness and Motion.SpringBuilder#torsionalStiffnessExpression to query or edit it.

stiffness - Variable in class nxopen.uf.UFMotion.Motion2DContact

stiffness - Variable in class nxopen.uf.UFMotion.Motion3DContact

STIFFNESS_AND_DAMPING - Static variable in class nxopen.cae.XyFunctionDataType

Function is Stiffness and Damping

STIFFNESS_AND_DAMPING - Static variable in class nxopen.cae.XyFunctionGeneralType

Function is Stiffness and Damping

STIFFNESS_AND_DAMPING - Static variable in class nxopen.cae.XyFunctionMotionType

Function is Stiffness and Damping

stiffnessCoefficients() - Method in interface nxopen.motion.BushingCylindricalCoefficients

Returns the stiffness coefficients, it is used in Motion.BushingBuilder.BushingTypes#CYLINDRICAL case
License requirements: None.

stiffnessCoefficients() - Method in interface nxopen.motion.BushingGeneralCoefficients

Returns the stiffness coefficients, it is used in Motion.BushingBuilder.BushingTypes#GENERAL case
License requirements: None.

stiffnessExpression() - Method in interface nxopen.motion.BodyContactAdams

Returns the stiffness expression
License requirements: None.

stiffnessExpression() - Method in interface nxopen.motion.BodyContactRecurdyn

Returns the stiffness expression
License requirements: None.

stiffnessExpression() - Method in interface nxopen.motion.CurveContactAdams

Returns the stiffness expression
License requirements: None.

stiffnessExpression() - Method in interface nxopen.motion.CurveContactRecurdyn

Returns the stiffness expression
License requirements: None.

stiffnessExpression() - Method in interface nxopen.motion.SpringBuilder

Returns the stiffness expression
License requirements: None.

stiffnessFunction() - Method in interface nxopen.motion.SpringBuilder

Returns the function tag.

stiffnessMethod - Variable in class nxopen.uf.UFCurve.BridgeData

stiffnessState() - Method in interface nxopen.cae.SpringEADBuilder

Returns the stiffness state drives the action upon commit
License requirements: nx_masterfem ("Finite Element Modeling")
.

stiffnessType() - Method in interface nxopen.motion.SpringBuilder

Returns the stiffness type
License requirements: None.

STILL_ASSIGNED - Static variable in class nxopen.routing.SingleDevice.DeleteObjectResult

Assigned components will not be deleted.

STILL_ROUTED - Static variable in class nxopen.routing.SingleDevice.DeleteObjectResult

Routed connections will not be deleted.

stillRunning - Variable in class nxopen.uf.UFCfi.SpawnCheckStatusData

STING - Static variable in class nxopen.routing.RoutePartDescriptor.CharxType

stitchMethod() - Method in interface nxopen.cae.EdgeSticherBuilder

Returns the stitch method
License requirements: None.

stitchOption() - Method in interface nxopen.cae.EdgeSticherBuilder

Returns the operand type for auto-stitch edge
License requirements: None.

stitchOption() - Method in interface nxopen.cae.FaceFaceImprintBuilder

Returns the output stitch option
License requirements: None.

stitchToggle() - Method in interface nxopen.cae.EdgeFaceImprintBuilder

Returns the stitch toggle state
License requirements: None.

stitchToggle() - Method in interface nxopen.cae.ImprintBuilder

Returns the stitch toggle state
License requirements: None.

STL - Static variable in class nxopen.cae.optimization.TBSSmoothBuilder.Format

Represents surfaces in .stl file

STL_FORMAT - Static variable in class nxopen.uf.UFMotion.AnlGeometryFormat

STL_STATE_base - Static variable in class nxopen.uf.UFConstants

StlError() - Constructor for class nxopen.uf.UFStd.StlError

StlError(int, Tag, int, double[], double[]) - Constructor for class nxopen.uf.UFStd.StlError

stlfileUnits() - Method in interface nxopen.facet.STLImportBuilder

Returns the STL file units
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

STLImportBuilder - Interface in nxopen.facet

The STL file import builder.

STLImportBuilder.AngularToleranceTypes - Class in nxopen.facet

The angular tolerance types

STLImportBuilder.FacetBodyTypes - Class in nxopen.facet

These represent the type of body that will get created on importing the STL file

STLImportBuilder.STLFileUnitsTypes - Class in nxopen.facet

The STL file units types

STLImporter - Interface in nxopen

Used to import an STL file into the work part.

STLImporter.AngularToleranceType - Class in nxopen

Specifies the angular tolerance.

STLImporter.FileFormatType - Class in nxopen

Specifies the STL file format.

STLImporter.FileUnitsType - Class in nxopen

Specifies the STL file units.

StlParameters() - Constructor for class nxopen.uf.UFMotion.StlParameters

StlParameters(double, double, double) - Constructor for class nxopen.uf.UFMotion.StlParameters

StlParams() - Constructor for class nxopen.uf.UFStd.StlParams

StlParams(double, float, boolean, boolean, int) - Constructor for class nxopen.uf.UFStd.StlParams

stock() - Method in interface nxopen.cam.BoundaryMillingMemberSet

Returns the stock value
License requirements: None.

stock() - Method in interface nxopen.cam.BoundaryMillingSet

Returns the stock value
License requirements: None.

stock() - Method in interface nxopen.cam.BoundaryTurnSet

Returns the stock value
License requirements: None.

STOCK - Static variable in class nxopen.cam.RoughTurningBuilder.PartOffDepthModeTypes

Part Off Depth Mode: Stock

stock() - Method in interface nxopen.cam.TurnRoughFinishTestCut

Returns the test cut stock
License requirements: None.

STOCK - Static variable in class nxopen.display.CameraBuilder.LensAngle

Stock Lenses

stock() - Method in interface nxopen.features.shipdesign.PlateSystemBuilder

Returns the plate stock builder, used to define the plate material, grade, thickness, mass density, and thicken option.

STOCK - Static variable in class nxopen.mechanicalrouting.PathStockPreferenceBuilder.AssignStockSubType

Default stock subtype.

STOCK - Static variable in class nxopen.mechanicalrouting.PathStockPreferenceBuilder.AssignStockType

Default stock type.

STOCK - Static variable in class nxopen.preferences.RoutingPartLibrary.RootType

Top node for selecting stocks.

STOCK - Static variable in class nxopen.routing.PathStockBuilder.AssignStockType

Default stock type.

STOCK - Static variable in class nxopen.routing.RouteManager.PartType

stock() - Method in interface nxopen.routing.RouteSweptTwistBuilder

Returns the stock
License requirements: routing_harness ("Routing Harness")
.

Stock - Interface in nxopen.routing

The Stock object represents a material (such as as pipe or tube) that covers a path of segments.

STOCK - Static variable in class nxopen.routing.StockBrowserBuilder.TypeFilter

Stock

stock - Variable in class nxopen.uf.UFCambnd.AppData

stock - Variable in class nxopen.uf.UFCamgeom.AppData

stock - Variable in class nxopen.uf.UFRoute.AskAppViewDefStockData

stock - Variable in class nxopen.uf.UFRoute.AskSegmentStockData

stock - Variable in class nxopen.uf.UFRoute.AskStockDataStockData

stock - Variable in class nxopen.uf.UFRoute.AskWireStockData

Stock.PortsData - Class in nxopen.routing

This class holds the data returned from Stock.getPorts()

STOCK_AS_COMPONENT - Static variable in class nxopen.preferences.RoutingStock.StockModeFlag

component created with solid body in the component

STOCK_AS_COMPONENT - Static variable in class nxopen.routing.StockUse

Stock as Component stock in the work part.

STOCK_COMPONENT - Static variable in class nxopen.routing.RouteManager.PartType

STOCK_IN_COMPONENT - Static variable in class nxopen.routing.StockUse

Stock as Component stock in the component part.

STOCK_OFFSET - Static variable in class nxopen.routing.StockOffsetPointBuilder.PointType

Routing stock offset point.

STOCK_OFFSET_PORT - Static variable in class nxopen.routing.Port.PortType

Stock Offset Port

STOCK_OUT - Static variable in class nxopen.EffectivityConditionBuilder.ToUnitType

Sets stock out unit as toUnit effectivity range

STOCK_PER_PASS - Static variable in class nxopen.cam.StepoverBuilder.StepoverTypes

Stock Per Pass

STOCK_PORT - Static variable in class nxopen.routing.Port.PortType

Stock Port

STOCK_STYLE - Static variable in class nxopen.routing.DesignRuleViolationCollection.Reason

stockAllowance() - Method in interface nxopen.cam.ProbeStockParametersBuilder

Returns the stock allowance
License requirements: None.

stockAnchor() - Method in interface nxopen.mechanicalrouting.StockBuilder

Returns
License requirements: routing_base ("Routing Basic")
.

stockAnchor() - Method in interface nxopen.preferences.RoutingStock

Returns the Anchor name associated with the stock preferences.

stockAnchor() - Method in interface nxopen.routing.OverstockBuilder

Returns the Anchor name associated with the overstock.

stockAnchor() - Method in interface nxopen.routing.StockBuilder

Returns the Anchor name associated with the stock.

stockAskName(Tag) - Method in interface nxopen.uf.UFRoute

Refer to UF_ROUTE_stock_ask_name for documentation.

StockBrowserBuilder - Interface in nxopen.routing

Builder class for stock browser .

StockBrowserBuilder.TypeFilter - Class in nxopen.routing

Filter type

StockBuilder - Interface in nxopen.mechanicalrouting

Builder for creating/editing stocks.

StockBuilder - Interface in nxopen.routing

Builder for creating/editing stocks.

StockBuilder.StockStyleType - Class in nxopen.routing

The stock display style

StockCollection - Interface in nxopen.routing

Represents a collection of Stock objects.

StockColorBuilder - Interface in nxopen.routing

Represents a StockColorBuilder .

stockData() - Method in interface nxopen.features.shipdesign.EdgeReinforcementBuilder

Returns the stock data used to define the stock information of the edge reinforcement.

stockData() - Method in interface nxopen.features.shipdesign.PillarSystemBuilder

Returns the stock data used to define the stock information of the stiffener.

stockData() - Method in interface nxopen.features.shipdesign.StiffenerBuilder

Returns the stock data
License requirements: None.

stockData() - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder

Returns the stock data used to define the stock information of the stiffener.

StockData - Interface in nxopen.routing

A StockData contains the various profiles, characteristic information, Anchor and other attributes that define Stock objects.

StockDataCollection - Interface in nxopen.routing

Represents a collection of StockData objects.

stockDatas() - Method in interface nxopen.routing.RouteManager

StockData collection .

stockDatas - Variable in class nxopen.uf.UFRoute.AskAnchorStockData

stockDataTag - Variable in class nxopen.uf.UFRoute.LoadStockData

stockDataTags - Variable in class nxopen.uf.UFRoute.AskCrossStockData

StockDataType - Class in nxopen.routing

Whether the StockData was generated by the bundling algorithm used for routing wires.

StockDefinition - Interface in nxopen.routing

Represents Routing StockDefinition object
Creator not available in KF.

stockDefinition() - Method in interface nxopen.routing.StockDevice

Returns the stock definition.

StockDevice - Interface in nxopen.routing

The Routing StockDevice corresponds to a generic stock instance of Routing.SingleDevice .

stockDriveBuilder() - Method in interface nxopen.cam.DmSurfBuilder

Returns the builder of Surface Stock (inheritable double)
License requirements: None.

stockFolder() - Method in interface nxopen.preferences.RoutingStock

Returns the default folder for stock components
License requirements: routing_base ("Routing Basic")
.

stockLength() - Method in interface nxopen.annotations.BillOfMaterialBuilder

Returns the value that specifies the stock length type.

stockLength() - Method in interface nxopen.routing.StockDevice

Returns the stock length.

stockLengthDisplayFlag() - Method in interface nxopen.preferences.RoutingPart

Returns the stock length display for the Routing bill of material.

stockLensType() - Method in interface nxopen.display.CameraBuilder

Returns the stock lens type
License requirements: None.

stockList() - Method in interface nxopen.cam.BoundaryTurnVariableStock

Returns the stock list
License requirements: None.

stockMode() - Method in interface nxopen.cam.TurnRoughFinishTestCut

Returns the test cut stock mode
License requirements: None.

stockMode() - Method in interface nxopen.preferences.RoutingStock

Returns the stock creation mode
License requirements: routing_base ("Routing Basic")
.

StockOffsetPointBuilder - Interface in nxopen.routing

Applies Assemblies Constraints to a selected Point or ControlPoint to mimic the update/move behavior of the input smart Point .

StockOffsetPointBuilder.PointData - Class in nxopen.routing

This class holds the data returned from StockOffsetPointBuilder.getPointData()

StockOffsetPointBuilder.PointType - Class in nxopen.routing

Point Type

StockOffsetPort - Interface in nxopen.routing

StockOffsetPort class handles the relationship between a component part's port occurrence and the dumb offset port in the work part.

StockOffsetPortCollection - Interface in nxopen.routing

Represents a collection of StockOffsetPort objects.

stockOffsetPorts() - Method in interface nxopen.routing.RouteManager

Stock Offset Port Collection.

stockPart - Variable in class nxopen.preferences.RoutingStock.DefaultStockData

Characteristic list used to find the appropriate StockData for building the stock.

stockpart - Variable in class nxopen.routing.PathStockBuilder._specified_stock_with_applied_charxData

Characteristic list used to find the appropriate Routing.StockData for building the stock.

stockPartBuilder() - Method in interface nxopen.cam.TurnMethodBuilder

Returns the part stock builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.

StockPartConverterBuilder - Interface in nxopen.routing

Represents a StockPartConverterBuilder Builder for Part Conversion of the stocks.

StockPartConverterBuilder.PartOption - Class in nxopen.routing

Represents the option to indicate the scope of stock part coversion

stockPerPassBuilder() - Method in interface nxopen.cam.StepoverBuilder

Returns the stock per pass
License requirements: None.

StockPerPassBuilder - Interface in nxopen.cam

Represents a Builder which holds the data for a set of individual stock per pass.

stockPieceCount() - Method in interface nxopen.annotations.BillOfMaterialBuilder

Returns the value that specifies whether include report cout of stock pieces.

StockPort - Interface in nxopen.routing

StockPort objects are automatically created and updated by Stock objects.

stocks() - Method in interface nxopen.routing.RouteManager

Stock collection .

stocks - Variable in class nxopen.uf.UFRoute.AskAnchorStock

stockSelection() - Method in interface nxopen.routing.RouteSweptFoldBuilder

Returns the stock selection.

stockSetting() - Method in interface nxopen.cam.SimulationOptionsBuilder

Returns the stock setting
License requirements: None.

stockSettings() - Method in interface nxopen.mechanicalrouting.CreatePathBuilder

Returns the builder for assigning stock to the new path.

stockSettings() - Method in interface nxopen.mechanicalrouting.InsulationBuilder

Returns the stock settings for Insulation assignment.

stockSettings() - Method in interface nxopen.mechanicalrouting.StockBuilder

Returns the path stock settings required to assign stock
License requirements: routing_base ("Routing Basic")
.

stockSettings() - Method in interface nxopen.routing.FillerStockBuilder

Returns the stock settings for creating filler stock.

stockSettings() - Method in interface nxopen.routing.OverstockBuilder

Returns the stock settings for overstock assignment.

stockSettings() - Method in interface nxopen.routing.QuickPathBuilder

Returns the stock settings for this path.

stockSettings() - Method in interface nxopen.routing.SpaceReservationBuilder

Returns the stock settings for creating space reservation stock
License requirements: routing_base ("Routing Basic")
.

stockSettings() - Method in interface nxopen.routing.StockBuilder

Returns the stock settings for stock assignment.

stockSettings() - Method in interface nxopen.routing.StockTransitionBuilder

Returns the stock settings for stock assignment.

StockSizeBuilder - Interface in nxopen.tooling

Represents a Tooling::StockSizeBuilder builder.

StockSizeBuilder.CalculateBoxSizeData - Class in nxopen.tooling

This class holds the data returned from StockSizeBuilder.calculateBoxSize()

StockSizeBuilder.Cylinder - Class in nxopen.tooling

Represents the base circle type of cylinder.

StockSizeBuilder.RefCsysType - Class in nxopen.tooling

Represents the reference CSYS type.

StockSizeBuilder.Shape - Class in nxopen.tooling

Represents the shape of stock size.

StockSizeBuilder.Types - Class in nxopen.tooling

Represents the shape of stock size.

StockSizeCollection - Interface in nxopen.tooling

Represents a collection of StockSize
To obtain an instance of this class, refer to ToolingManager

Created in NX6.0.0

stockSizes() - Method in interface nxopen.tooling.ToolingManager

Returns the StockSizeCollection instance belonging to this part .

stocksToAlign() - Method in interface nxopen.routing.AlignStockBuilder

Returns a collection of stocks to align.

stockStyle() - Method in interface nxopen.routing.StockBuilder

Returns the stock style of the stock to assign
License requirements: routing_base ("Routing Basic")
.

StockStyle - Class in nxopen.routing

Available styles of CrossSection for a given StockData .

StockStyleBuilder - Interface in nxopen.routing

Builder class to assigns style to the selected stock .

StockStyleBuilder.StockStyle - Class in nxopen.routing

Enum to define the stock style

stockSubType() - Method in interface nxopen.mechanicalrouting.PathStockPreferenceBuilder

Returns the type of stock being assigned.

StockTransition - Interface in nxopen.routing

Represents StockTransition object.

StockTransitionBuilder - Interface in nxopen.routing

Builder for creating/editing stockTransition.

stockType() - Method in interface nxopen.mechanicalrouting.PathStockPreferenceBuilder

Returns the type of stock being assigned.

stockType() - Method in interface nxopen.routing.PathStockBuilder

Returns the type of stock being assigned.

StockType - Class in nxopen.routing

Available overstock stock types for Overstock Applications for a given Overstock

stockType() - Method in interface nxopen.tooling.StockSizeBuilder

Deprecated.

Deprecated in NX10.0.0. This functionality is no longer supported.

StockUse - Class in nxopen.routing

Describes how the stock is used.

stockValue() - Method in interface nxopen.cam.SimulationOptionsBuilder

Returns the stock value
License requirements: None.

STOP - Static variable in class nxopen.cae.Post.AnimationControl

STOP - Static variable in class nxopen.cam.NcmWedmBuilder.GlobalStopPointTypes

stop points option stop

STOP - Static variable in class nxopen.cam.WedmGeomBuilder.StopPointTypes

stop point option stop

STOP - Static variable in class nxopen.cam.WedmOperationBuilder.StopPointTypes

stop point option stop

stop() - Method in interface nxopen.geometricutilities.PlayButtonsBuilder

TODO: fill in a description for this
License requirements: None.

STOP - Static variable in class nxopen.linedesigner.ConveyorStationFeatureBuilder.Type

STOP - Static variable in class nxopen.mechatronics.MechatronicsSession.SimulationAction

Stop

stop() - Method in interface nxopen.motion.AnimationControl

Animation stop
License requirements: mechanisms ("MECHANISMS")
.

stop() - Method in interface nxopen.motion.ArticulationControl

Articulation stop
License requirements: mechanisms ("MECHANISMS")
.

stop() - Method in interface nxopen.motion.SpreadsheetRunControl

SpreadsheetRun stop
License requirements: mechanisms ("MECHANISMS")
.

stop() - Method in interface nxopen.sim.IsvControlPanelBuilder

Simulation Control Panel: Stop the simulation
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.

STOP - Static variable in class nxopen.sim.IsvControlPanelBuilder.VncMode

STOP

stop() - Method in interface nxopen.tooling.RunSimulationBuilder

Stop simulation
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.

STOP_LIGHT - Static variable in class nxopen.cae.Post.Spectrum

STOP_PLAYBACK - Static variable in class nxopen.preferences.SessionMeasureRequirements.ActionOnViolation

Suspend playback and wait for acknowledgement for requirements violations

STOP_PROCESSING - Static variable in class nxopen.drawings.ConversionProcessSettingsBuilder.ActionOnErrorEnum

STOP_PROCESSING_AFTER_LIMIT - Static variable in class nxopen.drawings.ConversionProcessSettingsBuilder.ActionOnErrorEnum

STOP_PROCESSOR - Static variable in class nxopen.uf.UFDpud.Purpose

STOP_UPDATE - Static variable in class nxopen.drawings.ViewWorkflowBuilder.Handlingbodies

Deprecated.

STOP_UPDATE - Static variable in class nxopen.drawings.ViewWorkflowBuilder.HandlingBodiesType

STOP_UPDATEAND_NOTIFY_USER - Static variable in class nxopen.drawings.ViewWorkflowBuilder.Handlingbodies

Deprecated.

STOP_UPDATEAND_NOTIFY_USER - Static variable in class nxopen.drawings.ViewWorkflowBuilder.HandlingBodiesType

stopActive() - Method in interface nxopen.cam.ManualControlBuilder

Returns the stop command status mode
License requirements: None.

stopAnimation() - Method in interface nxopen.motion.LoadTransferControl

Stops animation
License requirements: mechanisms ("MECHANISMS")
.

stopAtIntersection() - Method in interface nxopen.blockstyler.SectionBuilder

Returns the StopAtIntersection
License requirements: None.

stopAtIntersection() - Method in interface nxopen.blockstyler.SuperSection

Returns the StopAtIntersection
License requirements: None.

stopCheckCollision() - Method in interface nxopen.tooling.RunSimulationBuilder

Returns the stop check collision if find next collision
License requirements: None.

stopCheckConstantStock() - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder

Returns the constant stock for stop check geometry
License requirements: None.

stopCheckFaceStock() - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder

Returns the face stop for start check geometry
License requirements: None.

stopCheckRadialStock() - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder

Returns the radial stock for stop check geometry
License requirements: None.

stopCondition() - Method in interface nxopen.cae.optimization.TBSOptimizationSolution

Returns the stop condition to end the optimization
License requirements: None.

stopDistance() - Method in interface nxopen.cam.InitialProfilePlunge

Returns the stop distance
License requirements: None.

stopDistance() - Method in interface nxopen.cam.TurnRoughFinishTestCut

Returns the test cut stop distance
License requirements: None.

stopDrag() - Method in interface nxopen.formboard.FlipComponentBuilder

Stop the drag operation of selected object.

stopDrag() - Method in interface nxopen.formboard.OrientBranchBuilder

Deprecated.

Deprecated in NX9.0.1. This method is no longer required.

stopDrag() - Method in interface nxopen.mechanicalrouting.EditPointBuilder

End a drag operation Applies the transforms obtained from solving the constraint network on routing objects.

stopDrag() - Method in interface nxopen.mechanicalrouting.MovePathBuilder

End a drag operation
License requirements: routing_base ("Routing Basic")
.

stopDrag() - Method in interface nxopen.routing.ClockPartBuilder

End a drag operation.

stopDrag() - Method in interface nxopen.routing.EditLineSegmentBuilder

Stop the drag operation if it has begun.

stopDrag() - Method in interface nxopen.routing.TransformPathBuilder

End a drag operation.

stopIteration() - Method in interface nxopen.uf.UFClone

Refer to UF_CLONE_stop_iteration for documentation.

stopLimit() - Method in interface nxopen.cam.CutDepthChecker

Returns the number of gouges to be used as a limit to stop
License requirements: None.

stopOnCollision() - Method in interface nxopen.cam.SimulationOptionsBuilder

Returns the stop on collision
License requirements: None.

stopOnError() - Method in interface nxopen.validate.ValidatorOptions

Returns the configuration of stopping checking process on error status.

stopOnEvent() - Method in interface nxopen.motion.PackagingInterferenceBuilder

Returns the Stop_On_Event flag of PackagingInterference object
License requirements: mechanisms ("MECHANISMS")

Created in NX4.0.0

stopOnEvent() - Method in interface nxopen.motion.PackagingMeasureBuilder

Returns the Stop_On_Event flag of PackagingMeasure object
License requirements: mechanisms ("MECHANISMS")

Created in NX4.0.0

stopOnHistoryBuffer() - Method in interface nxopen.cam.SimulationOptionsBuilder

Returns the stop on history buffer
License requirements: None.

stopOnLimit() - Method in interface nxopen.cam.CutDepthChecker

Returns the indicator to stop when the number of gouges has equalled the stop limit
License requirements: None.

stopOnLimitViolation() - Method in interface nxopen.cam.SimulationOptionsBuilder

Returns the stop on limit violation
License requirements: None.

stopOnRapidThroughIpw() - Method in interface nxopen.cam.SimulationOptionsBuilder

Returns the stop on rapid through ipw
License requirements: None.

stopOnWarning() - Method in interface nxopen.validate.ValidatorOptions

Returns the configuration of stopping checking on warning status.

stopPercentage() - Method in interface nxopen.cam.TurnRoughFinishTestCut

Returns the test cut stop percentage
License requirements: None.

stopPoint() - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder

Returns the stop point
License requirements: None.

stopPoint() - Method in interface nxopen.cam.TurnRoughFinishTestCut

Returns the test cut stop point
License requirements: None.

stopPointDistance() - Method in interface nxopen.cam.WedmBasedGeomBuilder

Returns the Stop Point Distance
License requirements: cam_base ("CAM BASE")
.

stopPointDistanceBuilder() - Method in interface nxopen.cam.WedmGeomBuilder

Returns the stop_point_distance builder
License requirements: cam_base ("CAM BASE")
.

stopPointDistanceBuilder() - Method in interface nxopen.cam.WedmOperationBuilder

Returns the stop_point_distance builder
License requirements: cam_base ("CAM BASE")
.

stopPointFlag() - Method in interface nxopen.cam.WedmBasedGeomBuilder

Returns the Stop Point Flag
License requirements: cam_base ("CAM BASE")
.

stopPointFlag() - Method in interface nxopen.cam.WedmGeomBuilder

Returns the Stop Point Flag
License requirements: cam_base ("CAM BASE")
.

stopPointFlag() - Method in interface nxopen.cam.WedmOperationBuilder

Returns the Stop Point Flag
License requirements: cam_base ("CAM BASE")
.

stopPointType() - Method in interface nxopen.cam.WedmBasedGeomBuilder

Returns the Stop Point Type
License requirements: cam_base ("CAM BASE")
.

stopPointType() - Method in interface nxopen.cam.WedmGeomBuilder

Returns the Stop Point Type
License requirements: cam_base ("CAM BASE")
.

stopPointType() - Method in interface nxopen.cam.WedmOperationBuilder

Returns the Stop Point Type
License requirements: cam_base ("CAM BASE")
.

StopPosition - Interface in nxopen.cam

Represents a stop position .

stopPosition() - Method in interface nxopen.cam.TurnCutParameters

Returns the stop position
License requirements: None.

stopPosition() - Method in interface nxopen.cam.TurnRoughFinishTestCut

Returns the test cut stop position
License requirements: None.

StopPosition.Types - Class in nxopen.cam

the stop at options .

stopPositionMethod() - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder

Returns the stop position method
License requirements: None.

stopRadius() - Method in interface nxopen.cam.InspectionMethodBuilder

Returns the scan stop radius
License requirements: None.

stopRayTracedDisplay() - Method in interface nxopen.display.RayTracedStudioBuilder

Stop the Ray Traced Studio progressive display.

StopshortData() - Constructor for class nxopen.features.EdgeBlendBuilder.StopshortData

stopshortData - Variable in class nxopen.uf.UFModl.EdgeBlendMultData

stopSymmetricModeling() - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection

Stops the symmetric modeling.

stopWhenLimitReached() - Method in interface nxopen.cam.GougeCheckBuilder

Returns the stop when limit reached.

stopWhenLimitReachedMaximumLimit() - Method in interface nxopen.cam.GougeCheckBuilder

Returns the stop when limit reached maximum limit.

STOR - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.DeviceTypeOptions

Use STOR

STORAGE_BLOCK - Static variable in class nxopen.die.HeelpostBuilder.Types

no hole allowed

storeAttributes() - Method in interface nxopen.pdm.DatabaseAttributeManager

Register DB_PART_NAME and DB_PART_DESC attributes with values set in the attribute_manager
License requirements: None.

storeColor() - Method in interface nxopen.features.ColorFeatureBuilder

Returns the save color property to feature
License requirements: None.

storeEnable() - Method in interface nxopen.motion.GraphBuilder

Deprecated.

Deprecated in NX11.0.0. Use Motion.GraphObjectBuilder instead.

storeExecutableCode(String, String) - Method in interface nxopen.mechatronics.RuntimeBehaviorBuilder

Stores executable code for source
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

storeFaceTag - Variable in class nxopen.facet.FacetingParameters

Should this FACET body record face tags or not (this does not apply to JT).

storeFaceTags - Variable in class nxopen.uf.UFFacet.Parameters

storeGraphInAfu(String) - Method in interface nxopen.motion.LoadTransferBuilder

Stores graph objects in afu file
License requirements: mechanisms ("MECHANISMS")
.

storeHarnessesToFlatten(HarnessDevice[]) - Method in interface nxopen.formboard.FormboardManager

Examines the input list of harnesses and stores information from the harnesses into the part containing this FormboardManager .

storeLogFileInTeamCenter() - Method in interface nxopen.drawings.ConversionProcessSettingsBuilder

Returns the store log file in teamcenter
License requirements: None.

storeModelViewPreview() - Method in interface nxopen.PreviewPropertiesBuilder

Returns the store model view preview.

storeOption() - Method in interface nxopen.cae.responsesimulation.FunctionEvaluationOutputSettings

Returns the store option.

storePartPreview() - Method in interface nxopen.PreviewPropertiesBuilder

Returns the store part preview.

storeSectionParameters() - Method in interface nxopen.tooling.RunnerBuilder

Stores current section parameters information.

storeSpreadsheet(String, String) - Method in interface nxopen.uf.UFXs

Refer to UF_XS_store_spreadsheet for documentation.

str - Variable in class nxopen.uf.UFUi.AskStringInputData

STRAIGHT - Static variable in class nxopen.cae.MappedMeshBuilder.MidNodeType

Straight Option

STRAIGHT - Static variable in class nxopen.drawings.BrokenViewBuilder.BreakLineStyle

Straight

STRAIGHT - Static variable in class nxopen.drawings.ViewBreakBuilder.Viewbreaklinestyle

STRAIGHT - Static variable in class nxopen.formboard.FormboardLayoutBuilder.BranchShape

Each branch forms a straight line.

STRAIGHT - Static variable in class nxopen.mechatronics.TransportSurfaceBuilder.MoveType

Straight

STRAIGHT - Static variable in class nxopen.motion.SegmentBuilder.TypeChoices

Straight

STRAIGHT - Static variable in class nxopen.preferences.PartDrafting.BreakLineStyle

Straight

STRAIGHT - Static variable in class nxopen.tooling.EjectorTableBuilder.EjectorType

straight ejectors

STRAIGHT_BEND - Static variable in class nxopen.tooling.UniversalUnformBuilder.BendTypes

straight bend type

STRAIGHT_CAMBER - Static variable in class nxopen.features.shipdesign.DeckBuilder.Types

Mold face is being defined by a generated straight camber shape.

STRAIGHT_SIDED_SPLINE_TYPE - Static variable in class nxopen.uf.UFPd.AttributeType

straightElevationChange() - Method in interface nxopen.motion.SegmentBuilder

Returns the elevation change of a straight segment
License requirements: mechanisms ("MECHANISMS")
.

STRAIGHTNESS - Static variable in class nxopen.annotations.FeatureControlFrameBuilder.FcfCharacteristic

straightness

STRAIGHTNESS - Static variable in class nxopen.annotations.GeometricCharacteristic

Specifies straightnesss characteristics

STRAIGHTNESS - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.CharacteristicOptions

strainhtness

STRAIGHTNESS - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.TolType

Straightness

STRAIGHTNESS_TYPE - Static variable in class nxopen.uf.UFGdt.Characteristic

STRAIN - Static variable in class nxopen.cae.DurabilityEvaluateFatigueHistoryBuilder.FatigueHistoryDataTypeEnum

STRAIN - Static variable in class nxopen.cae.responsesimulation.EvaluationResultType

STRAIN - Static variable in class nxopen.cae.responsesimulation.StrainGageResult

STRAIN - Static variable in class nxopen.cae.Result.Quantity

STRAIN - Static variable in class nxopen.cae.XyFunctionMeasure

Strain unit

STRAIN1DVON_MISES_MAXIMUM - Static variable in class nxopen.cae.optimization.Response

STRAIN1DVON_MISES_MINIMUM - Static variable in class nxopen.cae.optimization.Response

STRAIN1DVON_MISES_STRESS_RECOVERY_POINT_C - Static variable in class nxopen.cae.optimization.Response

STRAIN1DVON_MISES_STRESS_RECOVERY_POINT_D - Static variable in class nxopen.cae.optimization.Response

STRAIN1DVON_MISES_STRESS_RECOVERY_POINT_E - Static variable in class nxopen.cae.optimization.Response

STRAIN1DVON_MISES_STRESS_RECOVERY_POINT_F - Static variable in class nxopen.cae.optimization.Response

STRAIN2DMAJOR_PRINCIPAL - Static variable in class nxopen.cae.optimization.Response

STRAIN2DMAJOR_PRINCIPAL_BOTTOM - Static variable in class nxopen.cae.optimization.Response

STRAIN2DMAXIMUM_SHEAR - Static variable in class nxopen.cae.optimization.Response

STRAIN2DMAXIMUM_SHEAR_BOTTOM - Static variable in class nxopen.cae.optimization.Response

STRAIN2DMINOR_PRINCIPAL - Static variable in class nxopen.cae.optimization.Response

STRAIN2DMINOR_PRINCIPAL_BOTTOM - Static variable in class nxopen.cae.optimization.Response

STRAIN2DVON_MISES - Static variable in class nxopen.cae.optimization.Response

STRAIN2DVON_MISES_BOTTOM - Static variable in class nxopen.cae.optimization.Response

STRAIN3DFIRST_PRINCIPAL - Static variable in class nxopen.cae.optimization.Response

STRAIN3DSECOND_PRINCIPAL - Static variable in class nxopen.cae.optimization.Response

STRAIN3DTHIRD_PRINCIPAL - Static variable in class nxopen.cae.optimization.Response

STRAIN3DVON_MISES - Static variable in class nxopen.cae.optimization.Response

STRAIN_CM - Static variable in class nxopen.cae.XyFunctionUnit

Strain unit: cm/cm

STRAIN_ENERGY - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response

Strain energy

STRAIN_ENERGY - Static variable in class nxopen.cae.responsesimulation.EvaluationResultType

STRAIN_ENERGY - Static variable in class nxopen.cae.Result.Quantity

STRAIN_ENERGY_DENSITY - Static variable in class nxopen.cae.Result.Quantity

STRAIN_ENERGY_ERROR - Static variable in class nxopen.cae.Result.Quantity

STRAIN_EQ - Static variable in class nxopen.cae.Result.Quantity

STRAIN_IN - Static variable in class nxopen.cae.XyFunctionUnit

Strain unit: in/in

STRAIN_LIFE_MAX_PRINCIPLE - Static variable in class nxopen.uf.UFSf.DursolFatigueLifeCriterion

STRAIN_LIFE_MAX_SHEAR - Static variable in class nxopen.uf.UFSf.DursolFatigueLifeCriterion

STRAIN_LIFE_MAXIMUM_PRINCIPAL - Static variable in class nxopen.cae.DurabilityDamageEvaluationBuilder.FatigueLifeCriterionEnum

STRAIN_LIFE_MAXIMUM_PRINCIPAL - Static variable in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.FatigueLifeCriterionEnum

Maximum Principal

STRAIN_LIFE_MAXIMUM_SHEAR - Static variable in class nxopen.cae.DurabilityDamageEvaluationBuilder.FatigueLifeCriterionEnum

STRAIN_LIFE_MAXIMUM_SHEAR - Static variable in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.FatigueLifeCriterionEnum

Maximum Shear

STRAIN_M - Static variable in class nxopen.cae.XyFunctionUnit

Strain unit: cm/cm

STRAIN_MAX_P - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.FilteringType

Filter values based on the maximum principal strain

STRAIN_MAX_P - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.SortingType

Sort results using the maximum principal strain

STRAIN_MAX_S - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.FilteringType

Filter values based on the maximum shear strain

STRAIN_MAX_S - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.SortingType

Sort results using the maximum shear strain

STRAIN_MECH - Static variable in class nxopen.cae.Result.Quantity

STRAIN_MIN_P - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.FilteringType

Filter values based on the minimum principal strain

STRAIN_MIN_P - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.SortingType

Sort results using the minimum principal strain

STRAIN_MM - Static variable in class nxopen.cae.XyFunctionUnit

Strain unit: mm/mm

STRAIN_VON_MISES - Static variable in class nxopen.cae.optimization.Response

STRAIN_XX - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.FilteringType

Filter values based on Strain XX component

STRAIN_XX - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.SortingType

Sort results using the strain XX component

STRAIN_XY - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.FilteringType

Filter values based on Strain XY component

STRAIN_XY - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.SortingType

Sort results using the strain XX component

STRAIN_YY - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.FilteringType

Filter values based on Strain YY component

STRAIN_YY - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.SortingType

Sort results using the strain XX component

STRAIN_YZ - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.FilteringType

Filter values based on Strain YZ component

STRAIN_YZ - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.SortingType

Sort results using the strain XX component

STRAIN_ZX - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.FilteringType

Filter values based on Strain ZX component

STRAIN_ZX - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.SortingType

Sort results using the strain XX component

STRAIN_ZZ - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.FilteringType

Filter values based on Strain ZZ component

STRAIN_ZZ - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.SortingType

Sort results using the strain XX component

StrainGage - Interface in nxopen.cae.responsesimulation

Represents a StrainGage
To create or edit an instance of this class, use StrainGageBuilder

Created in NX6.0.0

strainGage() - Method in interface nxopen.cae.responsesimulation.StrainGageEvaluationSettingBuilder

Returns the destination strain Gages
License requirements: nx_response_anlys ("NX Response Analysis")
.

StrainGageBuilder - Interface in nxopen.cae.responsesimulation

Represents a StrainGageBuilder
To create a new instance of this class, use StrainGageCollection.createStrainGageBuilder(nxopen.cae.responsesimulation.StrainGage)
Default values.

StrainGageCollection - Interface in nxopen.cae.responsesimulation

Represents a collection of response analysis strain gage
To obtain an instance of this class, refer to Manager

Created in NX6.0.0

StrainGageEvaluationSetting - Interface in nxopen.cae.responsesimulation

Represents the parameters setting for strain gage evaluation.

StrainGageEvaluationSettingBuilder - Interface in nxopen.cae.responsesimulation

This is a manager to the StrainGageEvaluationSetting class.

StrainGageOrientationPlane - Class in nxopen.cae.responsesimulation

Specifies the orientation plane type of Strain Gage

StrainGagePlacementType - Class in nxopen.cae.responsesimulation

Specifies the placement type of Strain Gage

StrainGageResult - Class in nxopen.cae.responsesimulation

Specifies the result type of Strain Gage

strainGages() - Method in interface nxopen.cae.responsesimulation.Manager

Returns the Response Dynamics strain gage collection belonging to this sim part .

StrainGageShellElementFaceType - Class in nxopen.cae.responsesimulation

Specifies the shell element location type of Strain Gage

StrainGageType - Class in nxopen.cae.responsesimulation

Specifies the type of Strain Gage

strainType() - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder

Returns the strain type
License requirements: None.

STRAKING - Static variable in class nxopen.features.shipdesign.SeamBuilder.Types

Straking seam, used to split up structure into manufacturable size pieces.

STRAKING_SEAM - Static variable in class nxopen.features.shipdesign.ShipDesignPreferencesBuilder.Types

Straking Seam type

strakingSplitSystem() - Method in interface nxopen.features.shipdesign.SeamBuilder

Returns the indication if the straking seams should split the system by default.

strAnnot() - Method in interface nxopen.formboard.FaceAnnotationBuilder

Returns the string to display the name of Pattern file name selected by user.

strAnnotFileName() - Method in interface nxopen.formboard.FaceAnnotationBuilder

Returns the string to display the name of CGM name selected by user.

strategy() - Method in interface nxopen.cae.optimization.TBSOptimizationSolutionBuilder

Returns the optimization strategy
License requirements: None.

streamColor - Variable in class nxopen.cae.Post.Streamline

STREAMING - Static variable in class nxopen.display.IRayPlusStudioEditorBuilder.IRayPlusStudioRemoteRenderVideoType

streamIO() - Method in interface nxopen.mechatronics.MATLABSignalConnectionBuilder

Returns the mapping direction. 0 represent input, 1 represent output
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")

Created in NX11.0.0

streamIO() - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilder

Returns the data stream direction.

streamIO() - Method in interface nxopen.mechatronics.SignalConnectionBuilder

Returns the mapping direction.

STREAMLINE - Static variable in class nxopen.cae.Post.AnimationControl

STREAMLINE - Static variable in class nxopen.cae.Post.AnimationType

Streamline() - Constructor for class nxopen.cae.Post.Streamline

Streamline(Post.StreamlineData, Post.StreamlineStyle, Post.StreamlineColor, NXColor, Post.StreamlineSize, double, double, Post.StreamlineLineWeight, Post.StreamlineSynchronization, double) - Constructor for class nxopen.cae.Post.Streamline

Constructor for the Streamline object.

streamlineCutPattern() - Method in interface nxopen.cam.SurfaceContourBuilder

Returns the streamline cut pattern
License requirements: None.

streamlineCutStep() - Method in interface nxopen.cam.SurfaceContourBuilder

Returns the streamline cut step
License requirements: None.

StreamlineData() - Constructor for class nxopen.cae.Post.StreamlineData

StreamlineData(Post.ValueSharingCriterion, Post.NoDataTreatment, double) - Constructor for class nxopen.cae.Post.StreamlineData

Constructor for the StreamlineData object.

StreamlineExtraction() - Constructor for class nxopen.cae.Post.StreamlineExtraction

StreamlineExtraction(Post.StreamlineDirection, double, int, boolean, double, Post.IntegrationScheme, boolean) - Constructor for class nxopen.cae.Post.StreamlineExtraction

Constructor for the StreamlineExtraction object.

STREAMLINES - Static variable in class nxopen.cae.Post.Style

StreamlineSeed() - Constructor for class nxopen.cae.Post.StreamlineSeed

StreamlineSeed(Post.StreamlineExtraction, Point3d, int) - Constructor for class nxopen.cae.Post.StreamlineSeed

Constructor for the StreamlineSeed object.

streamlineSeedSetDelete(int) - Method in interface nxopen.cae.Post

Delete a Seed Set.

streamlineStepover() - Method in interface nxopen.cam.SurfaceContourBuilder

Returns the streamline stepover
License requirements: None.

streamlineToolPosition() - Method in interface nxopen.cam.SurfaceContourBuilder

Returns the streamline tool position
License requirements: None.

streamlineTrimAndExtend() - Method in interface nxopen.cam.SurfaceContourBuilder

Returns the streamline trim and extend
License requirements: None.

streamOption() - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilder

Returns the data stream type.

streamSize - Variable in class nxopen.cae.Post.Streamline

streamStyle - Variable in class nxopen.cae.Post.Streamline

streamSync - Variable in class nxopen.cae.Post.AnimationStreamline

streamSync - Variable in class nxopen.cae.Post.Streamline

STRENGTH_SAFETY_FACTOR - Static variable in class nxopen.cae.Result.Quantity

strengthAnalysis(String) - Method in interface nxopen.cae.Laminate

Perform a strength analysis on the current laminate definition using the current laminate strength loadcase.

strengthCollection() - Method in interface nxopen.cae.DurabilityManager

Returns the durability strength collection belonging to this sim part.

strengtheningRibbingParent() - Method in interface nxopen.die.DrawDiePunchBuilder

Returns the strengthening ribbing parent builder of the draw die punch.

strengthLoadcase() - Method in interface nxopen.cae.Laminate

Returns the loadcase information used for the laminate strength analysis
License requirements: None.

strengthRatio() - Method in interface nxopen.cae.LaminateGraphicalReportBuilder

Returns the strength ratio result
License requirements: None.

strengthRatio() - Method in interface nxopen.cae.LaminateQuickReportBuilder

Returns the ply and bonding strength ratios
License requirements: None.

strengthRatio() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

Returns the strength ratio
License requirements: None.

strengthRatioRule() - Method in interface nxopen.cae.LaminateGraphicalReportBuilder

Returns the strength ratio rule
License requirements: None.

strengthRatioRule() - Method in interface nxopen.cae.LaminateQuickReportBuilder

Returns the ply and bonding strength ratios rule
License requirements: None.

strengthRatioRule() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder

Returns the strength ratio summary table enveloping rule
License requirements: None.

StrengthResultsEvaluationSetting - Interface in nxopen.cae.responsesimulation

Represents parameters setting for strength results evaluation.

StrengthResultsEvaluationSettingBuilder - Interface in nxopen.cae.responsesimulation

This is a manager to the StrengthResultsEvaluationSetting class.

strengthSafetyFactor() - Method in interface nxopen.cae.DurabilityEventStrengthSettingsBuilder

Returns the strength safety factor.

strengthSafetyFactor() - Method in interface nxopen.cae.DurabilityResultsReportBuilder

Returns the strength safety factor toggle
License requirements: None.

StrengthStressCriteria - Class in nxopen.cae.responsesimulation

Specifies strength stress criteria

StrengthStressMaterialDefinitionMethod - Class in nxopen.cae.responsesimulation

Specifies the definition method for material

StrengthStressOption - Class in nxopen.cae.responsesimulation

The options of stress

STRESS - Static variable in class nxopen.cae.DurabilityEvaluateFatigueHistoryBuilder.FatigueHistoryDataTypeEnum

STRESS - Static variable in class nxopen.cae.responsesimulation.EvaluationResultType

STRESS - Static variable in class nxopen.cae.responsesimulation.StrainGageResult

STRESS - Static variable in class nxopen.cae.Result.Quantity

STRESS - Static variable in class nxopen.cae.XyFunctionMeasure

Stress unit

STRESS1DVON_MISES_MAXIMUM - Static variable in class nxopen.cae.optimization.Response

STRESS1DVON_MISES_MINIMUM - Static variable in class nxopen.cae.optimization.Response

STRESS1DVON_MISES_STRESS_RECOVERY_POINT_C - Static variable in class nxopen.cae.optimization.Response

STRESS1DVON_MISES_STRESS_RECOVERY_POINT_D - Static variable in class nxopen.cae.optimization.Response

STRESS1DVON_MISES_STRESS_RECOVERY_POINT_E - Static variable in class nxopen.cae.optimization.Response

STRESS1DVON_MISES_STRESS_RECOVERY_POINT_F - Static variable in class nxopen.cae.optimization.Response

STRESS2DMAJOR_PRINCIPAL - Static variable in class nxopen.cae.optimization.Response

STRESS2DMAJOR_PRINCIPAL_BOTTOM - Static variable in class nxopen.cae.optimization.Response

STRESS2DMAXIMUM_SHEAR - Static variable in class nxopen.cae.optimization.Response

STRESS2DMAXIMUM_SHEAR_BOTTOM - Static variable in class nxopen.cae.optimization.Response

STRESS2DMINOR_PRINCIPAL - Static variable in class nxopen.cae.optimization.Response

STRESS2DMINOR_PRINCIPAL_BOTTOM - Static variable in class nxopen.cae.optimization.Response

STRESS2DVON_MISES - Static variable in class nxopen.cae.optimization.Response

STRESS2DVON_MISES_BOTTOM - Static variable in class nxopen.cae.optimization.Response

STRESS3DFIRST_PRINCIPAL - Static variable in class nxopen.cae.optimization.Response

STRESS3DSECOND_PRINCIPAL - Static variable in class nxopen.cae.optimization.Response

STRESS3DTHIRD_PRINCIPAL - Static variable in class nxopen.cae.optimization.Response

STRESS3DVON_MISES - Static variable in class nxopen.cae.optimization.Response

STRESS_CN_CM2 - Static variable in class nxopen.cae.XyFunctionUnit

Stress unit: cN/cm^2

STRESS_KGF_CM2 - Static variable in class nxopen.cae.XyFunctionUnit

Stress unit: kgf/cm^2

STRESS_KGF_M2 - Static variable in class nxopen.cae.XyFunctionUnit

Stress unit: kgf/m^2

STRESS_KGF_MM2 - Static variable in class nxopen.cae.XyFunctionUnit

Stress unit: kgf/mm^2

STRESS_KPA - Static variable in class nxopen.cae.XyFunctionUnit

Stress unit: KPa

STRESS_LBF_FT - Static variable in class nxopen.cae.XyFunctionUnit

Stress unit: lbf/ft^2

STRESS_LEVEL_CROSSING_RATE - Static variable in class nxopen.cae.Result.Quantity

STRESS_LIFE - Static variable in class nxopen.cae.DurabilityDamageEvaluationBuilder.FatigueLifeCriterionEnum

STRESS_LIFE - Static variable in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.FatigueLifeCriterionEnum

Stress Life

STRESS_LIFE - Static variable in class nxopen.uf.UFSf.DursolFatigueLifeCriterion

STRESS_MAX_P - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.FilteringType

Filter values based on the maximum principal stress

STRESS_MAX_P - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.SortingType

Sort results using the maximum principal stress

STRESS_MAX_S - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.FilteringType

Filter values based on the maximum shear stress

STRESS_MAX_S - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.SortingType

Sort results using the maximum shear stress

STRESS_MIN_P - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.FilteringType

Filter values based on the minimum principal stress

STRESS_MIN_P - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.SortingType

Sort results using the minimum principal stress

STRESS_MPA - Static variable in class nxopen.cae.XyFunctionUnit

Stress unit: MPa

STRESS_PA - Static variable in class nxopen.cae.XyFunctionUnit

Stress unit: Pa

STRESS_PSI - Static variable in class nxopen.cae.XyFunctionUnit

Stress unit: Psi

STRESS_RECOVERY_POINT_C - Static variable in class nxopen.cae.Result.Section

STRESS_RECOVERY_POINT_D - Static variable in class nxopen.cae.Result.Section

STRESS_RECOVERY_POINT_E - Static variable in class nxopen.cae.Result.Section

STRESS_RECOVERY_POINT_F - Static variable in class nxopen.cae.Result.Section

STRESS_STRAIN - Static variable in class nxopen.cae.XyFunctionDataType

Function is Stress/Strain Function

STRESS_STRAIN - Static variable in class nxopen.cae.XyFunctionGeneralType

Function is Stress/Strain Function

STRESS_STRAIN - Static variable in class nxopen.cae.XyFunctionMaterialType

Function is Stress/Strain Function

STRESS_VON_MISES - Static variable in class nxopen.cae.optimization.Response

STRESS_XX - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.FilteringType

Filter values based on Stress XX component

STRESS_XX - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.SortingType

Sort results using the stress XX component

STRESS_XY - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.FilteringType

Filter values based on Stress XY component

STRESS_XY - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.SortingType

Sort results using the stress XY component

STRESS_YY - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.FilteringType

Filter values based on Stress YY component

STRESS_YY - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.SortingType

Sort results using the stress YY component

STRESS_YZ - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.FilteringType

Filter values based on Stress YZ component

STRESS_YZ - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.SortingType

Sort results using the stress YZ component

STRESS_ZX - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.FilteringType

Filter values based on Stress ZX component

STRESS_ZX - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.SortingType

Sort results using the stress ZX component

STRESS_ZZ - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.FilteringType

Filter values based on Stress ZZ component

STRESS_ZZ - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.SortingType

Sort results using the stress ZZ component

stressAxisDirectionSearchMethod() - Method in interface nxopen.cae.DurabilityStressAxesBuilder

Returns the stress axis direction search method.

stressAxisMethod() - Method in interface nxopen.cae.DurabilityStressAxesBuilder

Returns the stress axis method.

stressCriteriaType() - Method in interface nxopen.cae.responsesimulation.StrengthResultsEvaluationSettingBuilder

Returns the stress criteria type
License requirements: nx_response_anlys ("NX Response Analysis")
.

stressCriterion() - Method in interface nxopen.cae.DurabilityEventStrengthSettingsBuilder

Returns the stress criterion.

stressCriterion - Variable in class nxopen.uf.UFSf.AskDursolNxData

stressDirection() - Method in interface nxopen.cae.DurabilityStressAxesBuilder

Returns the stress direction.

stressOptionType() - Method in interface nxopen.cae.responsesimulation.StrengthResultsEvaluationSettingBuilder

Returns the stress option type
License requirements: nx_response_anlys ("NX Response Analysis")
.

stressType() - Method in interface nxopen.cae.DurabilityEventStrengthSettingsBuilder

Returns the stress type.

stressType() - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder

Returns the stress type
License requirements: None.

stressType - Variable in class nxopen.uf.UFSf.AskDursolNxData

STRETCH - Static variable in class nxopen.features.GlobalShapingBuilder.ModifyMethodType

By Surface stretch modify

STRETCH - Static variable in class nxopen.features.OvercrownBuilder.OperationType

STRETCH_TO_CURVE - Static variable in class nxopen.features.GlobalShapingBuilder.DeformationTypeValues

Stretch to curve

STRETCH_TO_POINT - Static variable in class nxopen.features.GlobalShapingBuilder.DeformationTypeValues

Stretch to point

stretchDirection() - Method in interface nxopen.features.GlobalShapingBuilder

Returns the stretch direction
License requirements: None.

stretchDirection() - Method in interface nxopen.features.OvercrownBuilder

Returns the stretch direction of deformation.

STRETCHED - Static variable in class nxopen.annotations.ForeshorteningSymbolSettingsBuilder.SymbolType

stretchNegative(double) - Method in interface nxopen.weld.WeldFillStripBuilder

Stretches the fill strip the input length opposite of the length direction.

stretchPositive(double) - Method in interface nxopen.weld.WeldFillStripBuilder

Stretches the fill strip the input length in the length direction.

STRIKE_POINT - Static variable in class nxopen.preferences.PartSheetmetal.FlatPatternObjectType

STRIKETHROUGH - Static variable in class nxopen.annotations.HoleTableSettingsFormatBuilder.DeletedHolesDisplayType

Strikethrough

STRIKETHROUGH - Static variable in class nxopen.annotations.PartsListBuilder.PartsListShowLockedDeletedRows

STRIKETHRU - Static variable in class nxopen.annotations.TabularNoteStyleBuilder.ShowLockedDeletedRowMethod

Strike thru

strikethru - Variable in class nxopen.uf.UFDraw.TabnotCellParams

strikethru - Variable in class nxopen.uf.UFTabnot.CellPrefs

STRING - Static variable in class nxopen.AttributePropertiesBaseBuilder.DataTypeOptions

String, the value will be a textual string

STRING - Static variable in class nxopen.BasePropertyTable.BasePropertyType

STRING - Static variable in class nxopen.blockstyler.PropertyList.PropertyType

String

STRING - Static variable in class nxopen.cae.PostScenarioVariantType

an ASCII character string

STRING - Static variable in class nxopen.cae.PropertyTable.PropertyType

BASE_PROPERTY_TABLE_property_type_string

STRING - Static variable in class nxopen.cam.CAMAttribute.ValueType

STRING - Static variable in class nxopen.cam.UdeParameter.ParameterTypes

STRING - Static variable in class nxopen.features.CustomAttribute.Type

String.

STRING - Static variable in class nxopen.mechatronics.MATLABSignalConnectionBuilder.DataType

string

STRING - Static variable in class nxopen.mechatronics.ParameterStockBuilder.DataType

String

STRING - Static variable in class nxopen.mechatronics.SignalConnectionBuilder.DataType

string

STRING - Static variable in class nxopen.NXObject.AttributeType

String

STRING - Static variable in class nxopen.options.OptionType

Option value is an ascii string

STRING - Static variable in class nxopen.partfamily.FamilyAttribute.AttrType

string attribute

STRING - Static variable in class nxopen.pdm.PdmSoaqueryNxmgrfielddatatype

String

STRING - Static variable in class nxopen.preferences.RoutingPartLibrary.ColumnType

String values.

STRING - Static variable in class nxopen.PropertyContainer.PropertyType

String

STRING - Static variable in class nxopen.report.BaseArgument.Type

Argument for string data

STRING - Static variable in class nxopen.RuleManager.RuleType

STRING - Static variable in class nxopen.SpreadsheetCellData.Types

string - Variable in class nxopen.uf.UFCurve.OcfValues

string - Variable in class nxopen.uf.UFDrf.DraftAidText

string - Variable in class nxopen.uf.UFGdt.CalloutString

STRING - Static variable in class nxopen.uf.UFKf.Type

string - Variable in class nxopen.uf.UFModl.StringList

STRING - Static variable in class nxopen.uistyler.StylerItem.ItemType

String item

STRING - Static variable in class nxopen.validate.RequirementBuilder.DataTypeOptions

STRING - Static variable in class nxopen.visualreporting.Property.DatatypeOption

String datatype

STRING - Static variable in class nxopen.weld.CharacteristicsValueBuilder.Type

Indicates the attribute value contains a string.

STRING - Static variable in class nxopen.weld.WeldAttribType

stringt

STRING_ITEM - Static variable in class nxopen.uistyler.Dialog.ItemType

STRING_LIST - Static variable in class nxopen.options.OptionType

Option value is a list of ascii strings

STRING_POINTER_VALUE - Static variable in class nxopen.uistyler.StylerEvent.Indicator

String pointer value

STRING_TYPE - Static variable in class nxopen.Part.PartFamilyAttrType

Deprecated.

string attribute

STRING_TYPE - Static variable in class nxopen.uf.UFPd.AttributeType

STRING_VALUE - Static variable in class nxopen.uf.UFPd.AttributeValueType

STRING_VALUE - Static variable in class nxopen.uistyler.StylerEvent.Indicator

String value

STRING_VLA - Static variable in class nxopen.features.CustomAttribute.Type

String variable length array.

StringArgument - Interface in nxopen.report

Represents an argument for string type data.

StringBlock - Interface in nxopen.blockstyler

Represents a String block .

stringData - Variable in class nxopen.uf.UFCurve.OcfData

stringDatumFeatName() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

Returns the string datum feat name
License requirements: None.

stringDatumLetter() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

Returns the string datum letter
License requirements: None.

stringerHeight() - Method in interface nxopen.linedesigner.StairwayEquipmentBuilder

Returns the stringer height
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

stringerWidth() - Method in interface nxopen.linedesigner.StairwayEquipmentBuilder

Returns the stringer width
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

stringFeatureName1() - Method in interface nxopen.cam.InspectionOutputOperationBuilder

Returns the string feature name1
License requirements: None.

stringFeatureName2() - Method in interface nxopen.cam.InspectionOutputOperationBuilder

Returns the string feature name2
License requirements: None.

stringFilterRule() - Method in interface nxopen.tooling.AssemblyDrawingBuilder

Returns the Filter rule
License requirements: None.

StringItem - Interface in nxopen.uistyler

Represents a StringItem for UI Styler.

StringItem.Activate - Interface in nxopen.uistyler

Called when a dialog user enters a character string and presses Return.

stringLimit1() - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder

Returns the first angle limit
License requirements: None.

stringLimit2() - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder

Returns the second angle limit
License requirements: None.

StringList() - Constructor for class nxopen.uf.UFModl.StringList

StringList(int, int[], int[], Tag[]) - Constructor for class nxopen.uf.UFModl.StringList

stringNameRule() - Method in interface nxopen.tooling.AssemblyDrawingBuilder

Returns the string name rule
License requirements: None.

stringOriginFeatName() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

Returns the string origin feat name
License requirements: None.

StringParameterData() - Constructor for class nxopen.mechatronics.ParameterStockBuilder.StringParameterData

stringPrefixI() - Method in interface nxopen.annotations.CoordinateNoteBuilder

Returns the string prefix i
License requirements: None.

stringPrefixJ() - Method in interface nxopen.annotations.CoordinateNoteBuilder

Returns the string prefix j
License requirements: None.

stringPrefixK() - Method in interface nxopen.annotations.CoordinateNoteBuilder

Returns the string prefix k
License requirements: None.

stringPrefixLabel() - Method in interface nxopen.annotations.CoordinateNoteBuilder

Returns the string prefix label
License requirements: None.

stringPrefixLevel() - Method in interface nxopen.annotations.CoordinateNoteBuilder

Returns the string prefix level
License requirements: None.

stringPrefixX() - Method in interface nxopen.annotations.CoordinateNoteBuilder

Returns the string prefix x
License requirements: None.

stringPrefixY() - Method in interface nxopen.annotations.CoordinateNoteBuilder

Returns the string prefix y
License requirements: None.

stringPrefixZ() - Method in interface nxopen.annotations.CoordinateNoteBuilder

Returns the string prefix z
License requirements: None.

stringPriDatum() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

Returns the string primary datum
License requirements: None.

stringPriDatum1() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

Returns the string primary datum1
License requirements: None.

STRINGS - Static variable in class nxopen.blockstyler.PropertyList.PropertyType

Strings

STRINGS - Static variable in class nxopen.PropertyContainer.PropertyType

Strings

strings - Variable in class nxopen.uf.UFPd.AttributeValueString

strings - Variable in class nxopen.uf.UFRoute.AskMultiportStringsData

stringSecDatum() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

Returns the string secondary datum
License requirements: None.

stringSecDatum1() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

Returns the string secondary datum1
License requirements: None.

stringSheetName() - Method in interface nxopen.tooling.AssemblyDrawingBuilder

Returns the sheet name
License requirements: None.

stringStock() - Method in interface nxopen.tooling.StockSizeBuilder

Returns the stock size string, it is separated by " X ".

stringSuffixI() - Method in interface nxopen.annotations.CoordinateNoteBuilder

Returns the string suffix i
License requirements: None.

stringSuffixJ() - Method in interface nxopen.annotations.CoordinateNoteBuilder

Returns the string suffix j
License requirements: None.

stringSuffixK() - Method in interface nxopen.annotations.CoordinateNoteBuilder

Returns the string suffix k
License requirements: None.

stringSuffixLabel() - Method in interface nxopen.annotations.CoordinateNoteBuilder

Returns the string suffix label
License requirements: None.

stringSuffixLevel() - Method in interface nxopen.annotations.CoordinateNoteBuilder

Returns the string suffix level
License requirements: None.

stringSuffixX() - Method in interface nxopen.annotations.CoordinateNoteBuilder

Returns the string suffix x
License requirements: None.

stringSuffixY() - Method in interface nxopen.annotations.CoordinateNoteBuilder

Returns the string suffix y
License requirements: None.

stringSuffixZ() - Method in interface nxopen.annotations.CoordinateNoteBuilder

Returns the string suffix z
License requirements: None.

stringTag - Variable in class nxopen.uf.UFCurve.OcfStringData

stringTerDatum() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

Returns the string tertiary datum
License requirements: None.

stringTerDatum1() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

Returns the string tertiary datum1
License requirements: None.

stringText() - Method in interface nxopen.cam.UdeParameter

Returns the string utf8 value of the parameter
License requirements: None.

stringTol - Variable in class nxopen.uf.UFCurve.OcfData

stringTolerancedFeat() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

Returns the string toleranced feat
License requirements: None.

stringTolName() - Method in interface nxopen.cam.InspectionOutputOperationBuilder

Returns the string tol name
License requirements: None.

stringTolName() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

Returns the string tolerance name
License requirements: None.

stringToReplace() - Method in interface nxopen.pdm.PartOperationImportBuilder

Returns the string to replace
License requirements: None.

stringToTruncate - Variable in class nxopen.uf.UFText.TruncateData

stringValue() - Method in interface nxopen.annotations.CustomSymbolTextData

Deprecated.

Deprecated in NX9.0.0. Use MasterSymbolListItemBuilder instead. Use BaseCustomSymbolBuilder.texts() to query list of custom symbol texts.

stringValue() - Method in interface nxopen.annotations.PmiAttributeValueStringBuilder

Returns the string_value
License requirements: None.

stringValue() - Method in interface nxopen.annotations.PmiStringBuilder

Returns the str value
License requirements: None.

stringValue() - Method in interface nxopen.AttributePropertiesBaseBuilder

Returns the string value.

stringValue() - Method in interface nxopen.cam.UdeParameter

Deprecated.

Deprecated in NX8.0.0. Use CAM.UdeParameter#stringText and CAM.UdeParameter#setStringText instead.

stringValue() - Method in interface nxopen.Expression

Returns the string value of the expression.

stringValue() - Method in interface nxopen.issue.IssueProperty

Returns the string value
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.

stringValue - Variable in class nxopen.NXObject.AttributeInformation

String attribute value (the default value is returned when reading templates of non-set attributes).

stringValue() - Method in interface nxopen.pdm.EffectivityAttributePropertiesBuilder

Returns the string value.

stringValue() - Method in interface nxopen.SpreadsheetCellData

Returns the string value stored in the cell.

stringValue - Variable in class nxopen.uf.UFAttr.GetStringUserAttributeData

stringValue - Variable in class nxopen.uf.UFPd.AttributeValue

STRIP_FAMILY_STATUS - Static variable in class nxopen.uf.UFClone.FamilyTreatment

STRIPED_SPIRAL - Static variable in class nxopen.mechanicalrouting.InsulationBuilder.WrapType

Striped Spiral

STRIPED_SPIRAL - Static variable in class nxopen.routing.OverstockBuilder.WrapType

Striped Spiral

stripLayout() - Method in interface nxopen.tooling.ToolingManager

Returns the StripLayout instance belonging to this part .

StripLayoutBuilder - Interface in nxopen.tooling

Represents a StripLayoutBuilder This class is for Strip Layout Design UI
To create a new instance of this class, use StripLayoutCollection.createStripLayoutBuilder()

Created in NX6.0.0

StripLayoutBuilder.FromStationType - Class in nxopen.tooling

Specifies the option of From Station for layout

StripLayoutBuilder.ToStationType - Class in nxopen.tooling

Specifies the option of To Station for layout

StripLayoutCollection - Interface in nxopen.tooling

Contains the create functions for builders.

StripLayoutStationInformationBuilder - Interface in nxopen.tooling

Strip Layout Process Description Builder of Tooling.

StripLayoutStationInformationBuilder.StationItem - Class in nxopen.tooling

Specifies the station items

stripLength() - Method in interface nxopen.tooling.QuickQuotationBuilder

Returns the strip length.

stripMaterial() - Method in interface nxopen.tooling.QuickQuotationBuilder

Returns the strip material.

STRIPPER_PLATE - Static variable in class nxopen.tooling.BendInsertDesignBuilder.BlankPositions

the blank is on the stripper plate

STRIPPER_PLATE - Static variable in class nxopen.tooling.FormingInsertBuilder.BlankPositions

the blank is on the stripper plate

stripperPlateClearance() - Method in interface nxopen.tooling.BendInsertDesignBuilder

Returns the clearance value of stripper plate.

stripperPlateClearance() - Method in interface nxopen.tooling.FormingInsertBuilder

Returns the option to use the stripper plate clearance.

stripperPlateClearance() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder

Returns the stripper plate clearance.

StripperVentingBuilder - Interface in nxopen.tooling

Stripper Venting Builder of PDW and EDW.

strippingLength() - Method in interface nxopen.features.sheetmetal.FlexibleCableBuilder

Returns the stripping length.

stripThickness() - Method in interface nxopen.tooling.QuickQuotationBuilder

Returns the strip thickness.

stripTravel() - Method in interface nxopen.tooling.MotionSimulationBuilder

Returns the strip travel to calculate controller data.

stripTravelDistance() - Method in interface nxopen.tooling.DieBaseBuilder

Returns the strip travel distance value.

stripVector() - Method in interface nxopen.tooling.MotionSimulationBuilder

Returns the strip feeding direction
License requirements: None.

stripWidthResult() - Method in interface nxopen.tooling.BlankNestingBuilder

Returns the strip width.

strokeAngleStep() - Method in interface nxopen.tooling.MotionSimulationBuilder

Returns the stroke angle step to calculate controller data.

strokeInfo - Variable in class nxopen.uf.UFDrf.AskEmbeddedUdsFontInfoData

StrokeInfo() - Constructor for class nxopen.uf.UFDrf.StrokeInfo

StrokeInfo(UFDrf.UdSymbolPenType, int, int) - Constructor for class nxopen.uf.UFDrf.StrokeInfo

strokeInfo - Variable in class nxopen.uf.UFDrf.UdSymbolFontInfo

strokeLength() - Method in interface nxopen.mechatronics.HydraulicCylinderBuilder

Returns the overall stroke length of the cylinder.

strokeLength() - Method in interface nxopen.mechatronics.PneumaticCylinderBuilder

Returns the overall stroke length of the cylinder.

strokePerMinute() - Method in interface nxopen.tooling.MotionSimulationBuilder

Returns the stroke per minute
License requirements: None.

strokesPerMinute() - Method in interface nxopen.tooling.SetPressModelBuilder

Returns the strokes per minute of press model
License requirements: None.

STRONG_AQUA_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

STRONG_AZURE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

STRONG_BLUE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

STRONG_BROWN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

STRONG_CARROT_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

STRONG_COBALT_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

STRONG_CORAL_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

STRONG_CORNFLOWER_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

STRONG_CRIMSON_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

STRONG_CYAN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

STRONG_EMERALD_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

STRONG_FOREST_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

STRONG_FUSHCIA_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

STRONG_GOLD_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

STRONG_GREEN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

STRONG_ICE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

STRONG_INDIGO_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

STRONG_KHAKI_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

STRONG_LAVENDER_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

STRONG_LEAF_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

STRONG_LEMON_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

STRONG_LIME_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

STRONG_MAGENTA_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

STRONG_MAROON_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

STRONG_MIDNIGHT_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

STRONG_MINT_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

STRONG_MOSS_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

STRONG_OLIVE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

STRONG_ORANGE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

STRONG_PEACH_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

STRONG_PINE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

STRONG_PINK_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

STRONG_PISTACHIO_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

STRONG_PLUM_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

STRONG_PURPLE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

STRONG_RED_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

STRONG_ROYAL_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

STRONG_SALMON_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

STRONG_SEA_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

STRONG_SKY_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

STRONG_SPRING_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

STRONG_STEEL_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

STRONG_STONE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

STRONG_TAN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

STRONG_TEAL_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

STRONG_TURQUOISE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

STRONG_UMBER_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

STRONG_VIOLET_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

STRONG_YELLOW_NAME - Static variable in class nxopen.uf.UFDisp.ColorName

strs - Variable in class nxopen.uf.UFSfLegend.Title

structIncomplete - Variable in class nxopen.BasePart.IncompleteStatus

Parts structure is incomplete

STRUCTURAL - Static variable in class nxopen.cae.Post.Spectrum

STRUCTURAL - Static variable in class nxopen.cae.SimResultReference.Type

structural result

STRUCTURAL - Static variable in class nxopen.cae.SolidPropertyCheckBuilder.CoupledSolutionOutput

structural results

STRUCTURAL_ACOUSTIC_COUPLING_DISTANCE - Static variable in class nxopen.cae.Result.Quantity

STRUCTURAL_ACOUSTIC_COUPLING_QUALITY - Static variable in class nxopen.cae.Result.Quantity

STRUCTURAL_UNCOUPLED_ACOUSTIC_COUPLING_QUALITY - Static variable in class nxopen.cae.Result.Quantity

STRUCTURE - Static variable in class nxopen.features.shipdesign.PillarBuilder.CreationMethod

STRUCTURE_FOR_REQUEST - Static variable in class nxopen.features.shipdesign.VerifyPenetrationBuilder.SelectionDialogType

STRUCTURE_FOR_VERIFY - Static variable in class nxopen.features.shipdesign.VerifyPenetrationBuilder.SelectionDialogType

STRUCTURE_SYSTEM - Static variable in class nxopen.features.shipdesign.MirrorShipStructureBuilder.Types

The structure system type.

STRUCTURE_WELDING - Static variable in class nxopen.weld.WeldJointBuilder.Application

Structure Welding Application.

structurePartCollector() - Method in interface nxopen.features.shipdesign.VerifyPenetrationBuilder

Returns the selected parts
License requirements: None.

structures() - Method in interface nxopen.ObjectTypeSelector

Returns the structures - This should be set to true if structures are desired in the output file
License requirements: None.

structureToUpdate() - Method in interface nxopen.assemblies.UpdateStructureBuilder

Returns the component selection of the Assembly structure to Update.

StructureWeldBuilder - Interface in nxopen.weld

This class is used to create or edit the information shared among all Structure Weld builders.

stTraverse() - Method in interface nxopen.tooling.ProfileSplitBuilder

Start traverse function to get edge loop
License requirements: None.

STUB - Static variable in class nxopen.annotations.LineComponent.LineType

stub line

STUB_ACME - Static variable in class nxopen.cam.fbm.ThreadFeatureGeometry.Form

Form: Stub Acme

STUB_ACME - Static variable in class nxopen.cam.HoleBossGeom.FormTypes

Form: Stub Acme

STUB_DOWN - Static variable in class nxopen.uf.UFGdt.StubDirection

STUB_LEFT - Static variable in class nxopen.uf.UFGdt.StubDirection

STUB_RIGHT - Static variable in class nxopen.uf.UFGdt.StubDirection

STUB_UP - Static variable in class nxopen.uf.UFGdt.StubDirection

STUBACME - Static variable in class nxopen.cam.DrillThreadMillToolBuilder.ToolFormTypeTypes

Stub Acme

stubLen - Variable in class nxopen.uf.UFDraw.ArrowParms

stubLength() - Method in interface nxopen.annotations.LineAndArrowPreferences

Returns the stub length
License requirements: None.

stubLength() - Method in interface nxopen.annotations.LineArrowStyleBuilder

Returns the stub length.

stubLength() - Method in interface nxopen.drawings.SectionLineStyleBuilder

Deprecated.

Deprecated in NX10.0.0. Use ViewSectionLineBuilder.overhang() instead.

stubLength - Variable in class nxopen.uf.UFDrf.LineArrowPreferences

stubLength - Variable in class nxopen.uf.UFGdt.LeaderSpec

stubPoints - Variable in class nxopen.uf.UFGdt.LeaderSpec

stubSide() - Method in interface nxopen.annotations.LeaderData

Returns the stub side
License requirements: None.

stubSize() - Method in interface nxopen.annotations.LeaderData

Returns the stub size
License requirements: None.

stubSymbolType() - Method in interface nxopen.annotations.LineArrowStyleBuilder

Returns the stub symbol type
License requirements: None.

StubSymbolType - Class in nxopen.annotations

Specifies on what type of symbol is attached to dimension stub

stubType() - Method in interface nxopen.annotations.ChamferDimensionPreferences

Returns the stub type
License requirements: None.

stubType - Variable in class nxopen.uf.UFDrf.ChamferDimensionData

STUD - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSymbolType

STUD - Static variable in class nxopen.annotations.Symbol

Specifies stud weld symbol (Arrow side only )

STUD - Static variable in class nxopen.routing.ReuseLibrary.PartType

Stud Post Placement Type

stud - Variable in class nxopen.routing.ReuseLibrary.SpecificationsGetConnectionPostPlacementData

Whether or not to place Studs for this connection.

stud - Variable in class nxopen.routing.ReuseLibrary.SpecificationsGetReportInBomData

Report Studs

STUD_VECTOR - Static variable in class nxopen.uf.UFConstants

STUDIO - Static variable in class nxopen.FileNewApplication

Deprecated.

Specifies a shape studio file new template

STUDIO - Static variable in class nxopen.preferences.ViewVisualizationVisual.DisplayModeType

Deprecated.

In Studio mode, objects are realistically rendered according to material and texture characteristics assigned to them

STUDIO - Static variable in class nxopen.preferences.ViewVisualizationVisual.RenderingStyle

studio() - Method in interface nxopen.UFSession

STUDIO - Static variable in class nxopen.View.RenderingStyleType

STUDIO_IMAGE_FILE_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId

STUDIO_SHADED - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.ViewMode

The view is studio shaded

STUDIO_SPLINE - Static variable in class nxopen.preferences.SessionModeling.SplineDefaultActionTypes

Specifies Studio Spline for editing a spline

STUDIO_STYLE - Static variable in class nxopen.uf.UFView.RenderingStyle

StudioImageCaptureBuilder - Interface in nxopen.display

Represents a StudioImageCaptureBuilder
This class is restricted to being called from a program running during an Interactive NX session.

StudioImageCaptureBuilder.AASamplesEnumType - Class in nxopen.display

Provide the following anti-aliasing sample size for off screen image capture

StudioImageCaptureBuilder.DPIEnumType - Class in nxopen.display

Provide the following screen capture resolutions in dots per inch

StudioImageCaptureBuilder.DrawingSizeEnumType - Class in nxopen.display

Provide the following standard Drawing sizes

StudioImageCaptureBuilder.OrientEnumType - Class in nxopen.display

Provide the following options to image orientation

StudioImageCaptureBuilder.UnitsEnumType - Class in nxopen.display

Provide the following resolution unit options to screen capture

StudioSpline - Interface in nxopen.features

Represents a studio spline feature
To create or edit an instance of this class, use StudioSplineBuilderEx

Created in NX5.0.0

StudioSplineBuilder - Interface in nxopen.features

Deprecated.

Deprecated in NX8.0.0. Use StudioSplineBuilderEx instead.

StudioSplineBuilder.CurveOption - Class in nxopen.features

Deprecated.

Options of the actions to be taken on an input non-parametric spline after its editing is done.

StudioSplineBuilder.MatchKnotsType - Class in nxopen.features

Deprecated.

Options for creating knots at the defining points in case of through point spline

StudioSplineBuilder.Method - Class in nxopen.features

Deprecated.

Spline methods.

StudioSplineBuilderEx - Interface in nxopen.features

Studio Spline builder class.

StudioSplineBuilderEx.DrawingPlaneOptions - Class in nxopen.features

Drawing plane options

StudioSplineBuilderEx.InputCurveOptions - Class in nxopen.features

Options of the actions to be taken on an input non-parametric spline after its editing is done.

StudioSplineBuilderEx.MatchKnotsTypes - Class in nxopen.features

Options for creating knots at the defining points in case of through point spline

StudioSplineBuilderEx.MovementMethodType - Class in nxopen.features

Points movement types

StudioSplineBuilderEx.Types - Class in nxopen.features

Spline methods.

StudioSplineBuilderEx.WCSOptionType - Class in nxopen.features

WCS principal axis or plane types

StudioSurface - Interface in nxopen.features

Represents a studio surface feature
To create or edit an instance of this class, use StudioSurfaceBuilder

Created in NX5.0.0

StudioSurfaceBuilder - Interface in nxopen.features

Represents a StudioSurface builder
To create a new instance of this class, use FeatureCollection.createStudioSurfaceBuilder(nxopen.features.Feature)
Default values.

StudioSurfaceBuilder.TransitionOptions - Class in nxopen.features

the transition control options when using By Points alignment method

StudioXform - Interface in nxopen.features

Represents a studio xform feature
To create or edit an instance of this class, use StudioXformBuilderEx

Created in NX6.0.0

StudioXformBuilder - Interface in nxopen.features

Deprecated.

Deprecated in NX8.5.0. Use StudioXformBuilderEx instead.

StudioXformBuilder.AdvancedMethodType - Class in nxopen.features

Deprecated.

Represents the advanced method type

StudioXformBuilder.FeatureType - Class in nxopen.features

Deprecated.

Represents the feature type

StudioXformBuilder.InsertKnotDirectionType - Class in nxopen.features

Deprecated.

Represents the insert knot direction type

StudioXformBuilder.PlanarizeDirectionType - Class in nxopen.features

Deprecated.

Represents the planarize direction type

StudioXformBuilder.PlanarizeMethodType - Class in nxopen.features

Deprecated.

Represents the planarize method type

StudioXformBuilder.PlanarizePlaneOptionType - Class in nxopen.features

Deprecated.

Represents the plane option type

StudioXformBuilder.RotatingPivotType - Class in nxopen.features

Deprecated.

Represents the rotating pivot type

StudioXformBuilder.RotationDirectionType - Class in nxopen.features

Deprecated.

Represents the rotation direction type

StudioXformBuilder.ScalingCenterType - Class in nxopen.features

Deprecated.

Represents the scaling center type

StudioXformBuilder.ScalingDirectionType - Class in nxopen.features

Deprecated.

Represents the scaling direction type

StudioXformBuilder.TranslationDirectionType - Class in nxopen.features

Deprecated.

Represents the translation direction type

StudioXformBuilder.Types - Class in nxopen.features

Deprecated.

Represents the Xform type

StudioXformBuilderEx - Interface in nxopen.features

Represents a StudioXform builder
To create a new instance of this class, use FeatureCollection.createStudioXformBuilderEx(nxopen.features.StudioXform)
Default values.

StudioXformBuilderEx.AdvancedMethodOptionType - Class in nxopen.features

Represents the advanced method option type

StudioXformBuilderEx.AdvancedMethodType - Class in nxopen.features

Deprecated.

Deprecated in NX8.5.0. Use StudioXformBuilderEx.AdvancedMethodOptionType instead.

StudioXformBuilderEx.ExtrationMethodType - Class in nxopen.features

B-surface extraction method

StudioXformBuilderEx.FeatureType - Class in nxopen.features

Represents the feature type

StudioXformBuilderEx.InsertKnotDirectionType - Class in nxopen.features

Represents the insert knot direction type

StudioXformBuilderEx.InsertPoleType - Class in nxopen.features

Represents the insert pole type

StudioXformBuilderEx.MovementMethodType - Class in nxopen.features

Represents the Xform movement type

StudioXformBuilderEx.PlanarizeDirectionType - Class in nxopen.features

Represents the planarize direction type

StudioXformBuilderEx.PlanarizeMethodType - Class in nxopen.features

Represents the planarize method type

StudioXformBuilderEx.PlanarizeProjectionPlaneType - Class in nxopen.features

Represents the planarize projection plane type

StudioXformBuilderEx.PoleEditType - Class in nxopen.features

Editing types of a pole of spline belonging to a Studio Spline feature

StudioXformBuilderEx.PrincipalMovementDirectionType - Class in nxopen.features

Represents the principal movement direction type

StudioXformBuilderEx.PrincipalRotatingAxisType - Class in nxopen.features

Represents the principal rotation axis type

StudioXformBuilderEx.PrincipalScalingDirectionType - Class in nxopen.features

Represents the principal scaling direction type

StudioXformBuilderEx.ProportionalPoleControlType - Class in nxopen.features

Represents the pole control type in proportional method

StudioXformBuilderEx.RotatingAxisType - Class in nxopen.features

Represents the rotation axis type

StudioXformBuilderEx.RotatingPivotType - Class in nxopen.features

Represents the rotating pivot type

StudioXformBuilderEx.ScalingCenterType - Class in nxopen.features

Represents the scaling center type

StudioXformBuilderEx.ScalingDirectionType - Class in nxopen.features

Represents the scaling direction type

StudioXformBuilderEx.SurfaceDirectionType - Class in nxopen.features

Represents the U or V direction of a B-Surface

StudioXformBuilderEx.Types - Class in nxopen.features

Represents the Xform editing type

studyName() - Method in interface nxopen.optimization.DesignStudyBuilder

Returns the study name which is unique in one part
License requirements: None.

studyName() - Method in interface nxopen.optimization.OptimizationBuilder

Returns the study name which is unique in one part
License requirements: None.

STYBLD_CONT_CURVATURE - Static variable in class nxopen.uf.UFStudio.StybldCont

STYBLD_CONT_G3 - Static variable in class nxopen.uf.UFStudio.StybldCont

STYBLD_CONT_POSITION - Static variable in class nxopen.uf.UFStudio.StybldCont

STYBLD_CONT_TANGENT - Static variable in class nxopen.uf.UFStudio.StybldCont

STYBLD_DIRECT_ISO_U - Static variable in class nxopen.uf.UFStudio.StybldDirect

STYBLD_DIRECT_ISO_V - Static variable in class nxopen.uf.UFStudio.StybldDirect

STYBLD_DIRECT_NO_SPECIFIC - Static variable in class nxopen.uf.UFStudio.StybldDirect

STYBLD_DIRECT_PERPENDICULAR - Static variable in class nxopen.uf.UFStudio.StybldDirect

STYBLD_METHOD_CURVES - Static variable in class nxopen.uf.UFStudio.StybldMethod

STYBLD_METHOD_LAW - Static variable in class nxopen.uf.UFStudio.StybldMethod

STYBLD_METHOD_PROFILE - Static variable in class nxopen.uf.UFStudio.StybldMethod

STYBLD_MINRAD_BOUND - Static variable in class nxopen.uf.UFStudio.StybldMinrad

STYBLD_MINRAD_NONE - Static variable in class nxopen.uf.UFStudio.StybldMinrad

STYBLD_MINRAD_PEAK - Static variable in class nxopen.uf.UFStudio.StybldMinrad

STYBLD_STIFF_AUTO - Static variable in class nxopen.uf.UFStudio.StybldStiff

STYBLD_STIFF_LOW - Static variable in class nxopen.uf.UFStudio.StybldStiff

STYBLD_TRANS_CONSTANT - Static variable in class nxopen.uf.UFStudio.StybldTrans

STYBLD_TRANS_LINEAR - Static variable in class nxopen.uf.UFStudio.StybldTrans

STYBLD_TRANS_NON_INFLECTING - Static variable in class nxopen.uf.UFStudio.StybldTrans

STYBLD_TRANS_SSHAPED - Static variable in class nxopen.uf.UFStudio.StybldTrans

STYBLD_TRIM_ATTACH_ALL - Static variable in class nxopen.uf.UFStudio.StybldTrim

STYBLD_TRIM_INPUT_BLENDS - Static variable in class nxopen.uf.UFStudio.StybldTrim

STYBLD_TRIM_INPUT_WALLS - Static variable in class nxopen.uf.UFStudio.StybldTrim

STYBLD_TRIM_NO - Static variable in class nxopen.uf.UFStudio.StybldTrim

STYBLD_VDEGREE_CUBIC - Static variable in class nxopen.uf.UFStudio.StybldVDegree

STYBLD_VDEGREE_QUINTIC - Static variable in class nxopen.uf.UFStudio.StybldVDegree

StybldCurveTrans() - Constructor for class nxopen.uf.UFStudio.StybldCurveTrans

StybldCurveTrans(UFStudio.StybldTrans, String, String, String, double, double) - Constructor for class nxopen.uf.UFStudio.StybldCurveTrans

StybldShapeTrans() - Constructor for class nxopen.uf.UFStudio.StybldShapeTrans

StybldShapeTrans(UFStudio.StybldTrans, double, double, double, double, double) - Constructor for class nxopen.uf.UFStudio.StybldShapeTrans

StycornerCrvOpt() - Constructor for class nxopen.uf.UFModl.StycornerCrvOpt

StycornerCrvOpt(int, double, double, double, double) - Constructor for class nxopen.uf.UFModl.StycornerCrvOpt

StycornerData() - Constructor for class nxopen.uf.UFModl.StycornerData

StycornerData(Tag[], int, Tag[], double[], int, int[], int, double, double, boolean, UFModl.StycornerCrvOpt[], int[], double[], double[]) - Constructor for class nxopen.uf.UFModl.StycornerData

style() - Method in interface nxopen.annotations.BaseAngularDimensionBuilder

Returns the style
License requirements: None.

style() - Method in interface nxopen.annotations.BaseChamferDimensionBuilder

Returns the style
License requirements: None.

style() - Method in interface nxopen.annotations.BaseCurveLengthDimensionBuilder

Returns the style
License requirements: None.

style() - Method in interface nxopen.annotations.BaseCustomSymbolBuilder

Returns the style builder
License requirements: None.

style() - Method in interface nxopen.annotations.BaseFrameBarBuilder

Returns the style
License requirements: None.

style() - Method in interface nxopen.annotations.BaseLinearDimensionBuilder

Returns the style
License requirements: None.

style() - Method in interface nxopen.annotations.BaseOrdinateDimensionBuilder

Returns the style
License requirements: None.

style() - Method in interface nxopen.annotations.BaseRadialDimensionBuilder

Returns the style
License requirements: None.

style() - Method in interface nxopen.annotations.BaseRapidDimensionBuilder

Returns the style
License requirements: None.

style() - Method in interface nxopen.annotations.BaseThicknessDimensionBuilder

Returns the style
License requirements: None.

style() - Method in interface nxopen.annotations.BendTableBuilder

Returns the bend table style
License requirements: drafting ("DRAFTING")
.

style() - Method in interface nxopen.annotations.CuttingPlaneSymbolBuilder

Returns the Cutting Plane Symbol Style
License requirements: None.

style() - Method in interface nxopen.annotations.DatumFeatureSymbolBuilder

Returns the datum feature style
License requirements: None.

style() - Method in interface nxopen.annotations.DatumTargetBuilder

Returns the style
License requirements: None.

style() - Method in interface nxopen.annotations.DraftingNoteBuilder

Returns the style builder
License requirements: None.

style() - Method in interface nxopen.annotations.EditSymbolDisplayBuilder

Returns the style
License requirements: None.

style() - Method in interface nxopen.annotations.FeatureControlFrameBuilder

Returns the style
License requirements: None.

style() - Method in interface nxopen.annotations.GeodesicDimensionBuilder

Returns the style
License requirements: None.

style() - Method in interface nxopen.annotations.HoleTableBuilder

Returns the hole table style
License requirements: None.

style() - Method in interface nxopen.annotations.IdSymbolBuilder

Returns the style
License requirements: None.

style() - Method in interface nxopen.annotations.LineWeldBuilder

Returns the StyleBuilder for the weld symbol
License requirements: None.

style() - Method in interface nxopen.annotations.PmiAttributeBuilder

Returns the StyleBuilder for the annotation
License requirements: None.

style() - Method in interface nxopen.annotations.ShipDimensionBuilder

Returns the style
License requirements: None.

style() - Method in interface nxopen.annotations.TableSectionBuilder

Returns the style
License requirements: None.

style() - Method in interface nxopen.drawings.BaseViewBuilder

Returns the view style
License requirements: None.

style() - Method in interface nxopen.drawings.DetailViewBuilder

Returns the style
License requirements: None.

style() - Method in interface nxopen.drawings.DraftingView

Returns object to View Style .

style() - Method in interface nxopen.drawings.ProjectedViewBuilder

Returns the view style
License requirements: None.

style() - Method in interface nxopen.drawings.SectionLineBuilder

Deprecated.

Deprecated in NX10.0.0. Use Drawings.SectionViewBuilder#viewStyle

style() - Method in interface nxopen.drawings.ViewSectionLineBuilder

Returns the section line arrowhead style
License requirements: None.

style() - Method in interface nxopen.formboard.PathLengthAnnotationBuilder

Returns the style
License requirements: routing_harness ("Routing Harness")
.

style() - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder

Returns the style
License requirements: None.

style() - Method in interface nxopen.routing.CrossSection

Returns the style of the profile.

style() - Method in interface nxopen.weld.WeldLabelBuilder

Returns the StyleBuilder for the annotation
License requirements: None.

style() - Method in interface nxopen.weld.WeldPmiBuilder

Returns the Annotations.StyleBuilder for the annotation.

StyleBuilder - Interface in nxopen.annotations

Represents a StyleBuilder .

styleCount() - Method in interface nxopen.cae.xyplot.DiagramDisplayStyles

Returns the style count
License requirements: nx_ftk ("NX Advanced Graphing")
.

StyledBlend - Interface in nxopen.features

Represents a styled blend feature
To create or edit an instance of this class, use StyledBlendBuilder

Created in NX6.0.0

StyledBlendBuilder - Interface in nxopen.features

Represents a StyledBlend builder
To create a new instance of this class, use FeatureCollection.createStyledBlendBuilder(nxopen.features.StyledBlend)
Default values.

StyledBlendBuilder.StyledBlendRadiusConstraintType - Class in nxopen.features

The radius constraint type

StyledBlendBuilder.StyledBlendShapeControlType - Class in nxopen.features

The shape control types

StyledBlendBuilder.StyledBlendTrimMethodType - Class in nxopen.features

The trim method types

StyledBlendBuilder.Types - Class in nxopen.features

The styled blend types

StyledCorner - Interface in nxopen.features

Represents a styled corner feature
To create or edit an instance of this class, use StyledCornerBuilder

Created in NX6.0.0

StyledCornerBuilder - Interface in nxopen.features

Represents a StyledCorner builder
To create a new instance of this class, use FeatureCollection.createStyledCornerBuilder(nxopen.features.StyledCorner)
Default values.

StyledCornerBuilder.CurveControlTypes - Class in nxopen.features

Curve control types

StyledCornerBuilder.InteriorCurveTypes - Class in nxopen.features

Intertior curve type

StyledCornerBuilder.ShapeControlMethodsTypes - Class in nxopen.features

Shape control types

StyledCornerBuilder.TrimAndSewMethodTypes - Class in nxopen.features

Trim and attach method types

StyledCornerBuilder.TrimCurveTypes - Class in nxopen.features

Trim curve types

StyledSweep - Interface in nxopen.features

Represents a styled sweep feature
To create or edit an instance of this class, use StyledSweepBuilder

Created in NX6.0.0

StyledSweepBuilder - Interface in nxopen.features

Represents a StyledSweep builder
To create a new instance of this class, use FeatureCollection.createStyledSweepBuilder(nxopen.features.Feature)
Default values.

StyledSweepBuilder.FixedStringOptions - Class in nxopen.features

This enum represents the Fixed String option

StyledSweepBuilder.ScalingMethodOptions - Class in nxopen.features

This enum represents the Scaling Method option

StyledSweepBuilder.SectionOrientationOptions - Class in nxopen.features

This enum represents the Section Orientation option

StyledSweepBuilder.TransitionOptions - Class in nxopen.features

This enum represents the Transition option

StyledSweepBuilder.Types - Class in nxopen.features

This enum represents the sweep type option (Number of Guides)

StyledSweepDoubleOnPathDimBuilder - Interface in nxopen.geometricutilities

Represents a StyledSweepDoubleOnPathDimBuilder
Created in NX6.0.0

StyledSweepDoubleOnPathDimBuilderList - Interface in nxopen.geometricutilities

Represents a list of objects.

StyledSweepReferenceMethodBuilder - Interface in nxopen.geometricutilities

Represents a StyledSweepReferenceMethodBuilder
Created in NX6.0.0

StyledSweepReferenceMethodBuilder.ReferenceOptions - Class in nxopen.geometricutilities

This enum represents the orientation reference option.

styler() - Method in interface nxopen.UFSession

styler() - Method in interface nxopen.UI

the Uistyler for the current session.

Styler - Interface in nxopen.uistyler

Represents a Uistyler for UI Styler
To obtain an instance of this class, refer to UI

Created in NX5.0.0

StylerEvent - Interface in nxopen.uistyler

Represents a StylerEvent .

StylerEvent.Indicator - Class in nxopen.uistyler

Describes indicator value

StylerEvent.Miscellaneous - Class in nxopen.uistyler

Describes event index

StylerEvent.Reason - Class in nxopen.uistyler

Describes callback reason

StylerItem - Interface in nxopen.uistyler

Represents a Styler Item .

StylerItem.ItemType - Class in nxopen.uistyler

Describes kind of action to be taken from callbac.

styles - Variable in class nxopen.uf.UFUgfont.AskFontStylesData

SUB - Static variable in class nxopen.tooling.BendInsertDesignBuilder.ParentOption

sub parent

sub(double[], double[]) - Method in interface nxopen.uf.UFVec2

Refer to UF_VEC2_sub for documentation.

sub(double[], double[]) - Method in interface nxopen.uf.UFVec3

Refer to UF_VEC3_sub for documentation.

SUB_DIE - Static variable in class nxopen.tooling.BurringInsertBuilder.ParentTypes

use PDW project's sub-die base as parent part

SUB_DIE - Static variable in class nxopen.tooling.FormingInsertBuilder.ParentTypes

use PDW project's sub-die base as parent part

SUB_FIRST - Static variable in class nxopen.tooling.DieBaseBuilder.ParentNodeOpt

use PDW project's sub-die base as parent part

SUB_NODE - Static variable in class nxopen.blockstyler.Wizard.TaskNavigatorItem

SUB_PART - Static variable in class nxopen.visualreporting.VisualReport.ScopeTypeOption

The report is sub-part object report

SUB_SECOND - Static variable in class nxopen.tooling.DieBaseBuilder.ParentNodeOpt

use PDW project's sub-die base as parent part

subAssembly() - Method in interface nxopen.tooling.ValidCheckBuilder

Returns the sub-assembly, to specify if sub-assembly needs to be searched
License requirements: None.

subcase() - Method in interface nxopen.cae.DurabilityRandomEventBuilder

Returns the subcase index.

subcase() - Method in interface nxopen.cae.DurabilityTransientEventBuilder

Returns the subcase index.

SubcaseData() - Constructor for class nxopen.cae.optimization.TBSLoadCase.SubcaseData

subcaseid - Variable in class nxopen.cae.optimization.TBSLoadCase.SubcaseData

subComponent() - Method in interface nxopen.features.shipdesign.SteelDistributionBuilder

Returns the get subcomponent
License requirements: None.

subDimensions - Variable in class nxopen.uf.UFDrf.AskDimensionsOfSetData

subDir - Variable in class nxopen.uf.UFAssem.AskSearchDirectoriesData

subdiv() - Method in interface nxopen.UFSession

subdivide() - Method in interface nxopen.features.subdivision.SubdivisionSubdivideFaceBuilder

Perform subdivide operation.

subdivide(ISegment, SegmentManager.SubdivideOption) - Method in interface nxopen.routing.SegmentManager

Subdivide a routing path segment
License requirements: routing_base ("Routing Basic")
.

SUBDIVIDE_INTO_FOUR - Static variable in class nxopen.facet.SubdivideFacetBodyBuilder.SubdivisionMethodType

Subdivides the polygons into four sub triangles.

SUBDIVIDE_LOOP - Static variable in class nxopen.features.RapidSurfaceBuilder.OperationTypes

subdivide loop

SUBDIVIDE_SEG - Static variable in class nxopen.routing.DesignRuleViolationCollection.Reason

subdivideArcLength() - Method in interface nxopen.routing.SubdivideSegmentBuilder

Returns the arc length of each resulting segment from subdivision, if SubdivideSegmentBuilder.Types is SubdivideSegmentBuilder.Types.ARC_LENGTH_SEGMENTS
License requirements: routing_base ("Routing Basic")

Created in NX6.0.0

SUBDIVIDEBY_EDGE_LENGTH - Static variable in class nxopen.facet.SubdivideFacetBodyBuilder.SubdivisionMethodType

Subdivides the polygons to a specified edge length.

subdivideEndPercentage() - Method in interface nxopen.routing.SubdivideSegmentBuilder

Returns the end location of subdivision on the segment as percentage, if SubdivideSegmentBuilder.Types is SubdivideSegmentBuilder.Types.EQUAL_SEGMENTS or SubdivideSegmentBuilder.Types.ARC_LENGTH_SEGMENTS
License requirements: routing_base ("Routing Basic")

Created in NX6.0.0

SubdivideFacetBodyBuilder - Interface in nxopen.facet

This class provides functionality to subdivide the polygons to increase the density of the facet bodies.

SubdivideFacetBodyBuilder.InterpolationMethodType - Class in nxopen.facet

Subdivision interpolation methods

SubdivideFacetBodyBuilder.SubdivisionMethodType - Class in nxopen.facet

Subdivision methods

subdivideNumSegments() - Method in interface nxopen.routing.SubdivideSegmentBuilder

Returns the number of subdivisions to do on the given segment, if SubdivideSegmentBuilder.Types is SubdivideSegmentBuilder.Types.EQUAL_SEGMENTS or SubdivideSegmentBuilder.Types.ARC_LENGTH_SEGMENTS
License requirements: routing_base ("Routing Basic")

Created in NX6.0.0

SubdivideOption() - Constructor for class nxopen.routing.SegmentManager.SubdivideOption

SubdivideOption(SegmentManager.SubdivideSpacing, double, double, double, int, int, double, double, double, boolean, boolean, boolean) - Constructor for class nxopen.routing.SegmentManager.SubdivideOption

Constructor for the SubdivideOption object.

subdividePoint() - Method in interface nxopen.routing.SubdivideSegmentBuilder

Returns the location of the subdivision point on segment as arclength or %arclength or point, if SubdivideSegmentBuilder.Types is SubdivideSegmentBuilder.Types.AT_POINT
License requirements: routing_base ("Routing Basic")

Created in NX6.0.0

subdivideRegion() - Method in interface nxopen.weld.WeldFillBuilder

Returns the indication if the fill is to be a collection of rectangles (true), or simply the enclosed boundary area (false).

SubdivideSegmentBuilder - Interface in nxopen.routing

Represents a SubdivideSegmentBuilder .

SubdivideSegmentBuilder.EqualSegmentsMethod - Class in nxopen.routing

Options for subdivision with Equal Segments spacing method.

SubdivideSegmentBuilder.SplineSettingsData - Class in nxopen.routing

This class holds the data returned from SubdivideSegmentBuilder.getSplineSettings()

SubdivideSegmentBuilder.SplineSettingValuesData - Class in nxopen.routing

This class holds the data returned from SubdivideSegmentBuilder.getSplineSettings()

SubdivideSegmentBuilder.Types - Class in nxopen.routing

Spacing method to use for subdivision.

subdivideStartPercentage() - Method in interface nxopen.routing.SubdivideSegmentBuilder

Returns the start location of subdivision on the segment as percentage, if SubdivideSegmentBuilder.Types is SubdivideSegmentBuilder.Types.EQUAL_SEGMENTS or SubdivideSegmentBuilder.Types.ARC_LENGTH_SEGMENTS
License requirements: routing_base ("Routing Basic")

Created in NX6.0.0

subdivisionBodies() - Method in interface nxopen.Part

Returns the SubdivisionBodyCollection instance belonging to this part .

subdivisionBodiesToMerge() - Method in interface nxopen.features.subdivision.MergeSubdivisionBodiesBuilder

Returns the Features.Subdivision.SubdivisionBody features to merge
License requirements: None.

subdivisionBodiesToSplit() - Method in interface nxopen.features.subdivision.SplitSubdivisionBodyBuilder

Returns the Features.Subdivision.SubdivisionBody features to split
License requirements: None.

SubdivisionBody - Interface in nxopen.features.subdivision

Represents a subdivision body feature.

SubdivisionBodyCollection - Interface in nxopen.features.subdivision

Represents a collection of subdivision body feature tools.

SubdivisionBridgeFaceBuilder - Interface in nxopen.features.subdivision

Represents a SubdivisionBridgeFaceBuilder builder.

SubdivisionBridgeFaceBuilder.ContinuityType - Class in nxopen.features.subdivision

Type of continuity.

SubdivisionConnectCageBuilder - Interface in nxopen.features.subdivision

Represents a SubdivisionConnectCageBuilder builder.

SubdivisionConnectCageBuilder.ContinuityTypes - Class in nxopen.features.subdivision

Represents the continuity type

SubdivisionDeleteCageBuilder - Interface in nxopen.features.subdivision

Deprecated.

Deprecated in NX11.0.0. Use SubdivisionDeleteObjectBuilder instead.

SubdivisionDeleteFaceBuilder - Interface in nxopen.features.subdivision

Deprecated.

Deprecated in NX10.0.0. Use SubdivisionDeleteCageBuilder instead.

SubdivisionDeleteObjectBuilder - Interface in nxopen.features.subdivision

Represents a Features.Subdivision.SubdivisionDeleteObjectBuilder builder.

subdivisionDepth - Variable in class nxopen.uf.UFDisp.ShadeOptions

SubdivisionExtrudeCageBuilder - Interface in nxopen.features.subdivision

Represents a SubdivisionExtrudeCageBuilder builder.

SubdivisionExtrudeCageBuilder.ContinuityType - Class in nxopen.features.subdivision

Type of continuity.

SubdivisionExtrudeCageBuilder.DirectionType - Class in nxopen.features.subdivision

Represents the extrude direction.

SubdivisionExtrudeCageBuilder.ScalingMethodType - Class in nxopen.features.subdivision

Scaling method

SubdivisionExtrudeCageBuilder.TransformationMethodType - Class in nxopen.features.subdivision

Transformation method types

SubdivisionFillBuilder - Interface in nxopen.features.subdivision

Represents a SubdivisionFillBuilder builder.

SubdivisionFillBuilder.ContinuityType - Class in nxopen.features.subdivision

Type of continuity.

SubdivisionLoftBuilder - Interface in nxopen.features.subdivision

Represents a SubdivisionLoftBuilder builder.

SubdivisionLoftBuilder.ContinuityType - Class in nxopen.features.subdivision

Type of continuity.

SubdivisionMergeFaceBuilder - Interface in nxopen.features.subdivision

Represents a SubdivisionMergeFaceBuilder builder.

SubdivisionMeshBody - Interface in nxopen

Represents a subdivision mesh.

SubdivisionMeshEdge - Interface in nxopen

Represents a subdivision mesh edge.

SubdivisionMeshEdge.VerticesData - Class in nxopen

This class holds the data returned from SubdivisionMeshEdge.getVertices()

SubdivisionMeshFace - Interface in nxopen

Represents a subdivision mesh face.

SubdivisionMeshVertex - Interface in nxopen

Represents a subdivision mesh vertex.

subdivisionMethod() - Method in interface nxopen.facet.SubdivideFacetBodyBuilder

Returns the subdivision method
License requirements: None.

subdivisionModeling() - Method in interface nxopen.preferences.SessionPreferences

Returns object for doing Subdivision Modeling preferences settings applicable to entire session .

SubdivisionModelingPreferences - Interface in nxopen.preferences

Represents the set of Modeling preferences applicable to entire session
To obtain an instance of this class, refer to SessionPreferences

Created in NX9.0.0

SubdivisionModelingPreferences.CagePolylineVertexSizes - Class in nxopen.preferences

Cage polyline vertex size type.

SubdivisionModelingPreferences.CagePolylineVertexStyles - Class in nxopen.preferences

Cage polyline vertex style.

SubdivisionModelingPreferences.DisplayModes - Class in nxopen.preferences

Display modes of subdivision cage and resulting body.

SubdivisionModelingPreferences.VertexSizeTypes - Class in nxopen.preferences

Vertex size type.

SubdivisionModelingPreferences.VertexStyleTypes - Class in nxopen.preferences

Vertex display style.

SubdivisionPrimitiveShapeBuilder - Interface in nxopen.features.subdivision

Deprecated.

Deprecated in NX11.0.0. Use SubdivisionPrimitiveShapeBuilderEx instead.

SubdivisionPrimitiveShapeBuilder.Types - Class in nxopen.features.subdivision

Deprecated.

Type of primitive.

SubdivisionPrimitiveShapeBuilderEx - Interface in nxopen.features.subdivision

Represents a Features.Subdivision.SubdivisionPrimitiveShapeBuilderEx builder.

SubdivisionPrimitiveShapeBuilderEx.SphereSubdivisionLevel - Class in nxopen.features.subdivision

Level of subdivisions of cubical cage to construct spherical primitive.

SubdivisionPrimitiveShapeBuilderEx.Types - Class in nxopen.features.subdivision

Type of primitive.

SubdivisionProjectCageBuilder - Interface in nxopen.features.subdivision

Represents a SubdivisionProjectCageBuilder builder
To create a new instance of this class, use SubdivisionBodyCollection.createSubdivisionProjectCageBuilder()
Default values.

SubdivisionProjectCageBuilder.ModeOptions - Class in nxopen.features.subdivision

Best fit mode

SubdivisionProjectCageBuilder.TargetTypes - Class in nxopen.features.subdivision

Target types

SubdivisionProjectCageBuilder.Types - Class in nxopen.features.subdivision

The type of projection

SubdivisionRevolveBuilder - Interface in nxopen.features.subdivision

Represents a SubdivisionRevolveBuilder builder.

SubdivisionRevolveBuilder.ContinuityType - Class in nxopen.features.subdivision

Type of continuity.

SubdivisionSetContinuityBuilder - Interface in nxopen.features.subdivision

Represents a SubdivisionSetContinuityBuilder builder.

SubdivisionSetContinuityBuilder.ContinuityTypes - Class in nxopen.features.subdivision

Represents the continuity type

SubdivisionSetWeightBuilder - Interface in nxopen.features.subdivision

Represents a SubdivisionSetWeightBuilder builder.

SubdivisionSewCageBuilder - Interface in nxopen.features.subdivision

Represents a SubdivisionSewCageBuilder builder
To create a new instance of this class, use SubdivisionBodyCollection.createSubdivisionSewCageBuilder()

Created in NX10.0.0

SubdivisionSplitFaceBuilder - Interface in nxopen.features.subdivision

Represents a SubdivisionSplitFaceBuilder builder.

SubdivisionSplitFaceBuilder.Types - Class in nxopen.features.subdivision

Represents the split type.

SubdivisionSubdivideFaceBuilder - Interface in nxopen.features.subdivision

Represents a SubdivisionSubdivideFaceBuilder builder.

SubdivisionSweepBuilder - Interface in nxopen.features.subdivision

Represents a SubdivisionSweepBuilder builder.

SubdivisionSweepBuilder.ContinuityType - Class in nxopen.features.subdivision

Type of continuity.

subdivisionTaskEnvironment() - Method in interface nxopen.Session

Returns the SubdivisionTaskEnvironment belonging to this session
Created in NX9.0.0

SubdivisionTaskEnvironment - Interface in nxopen

Represents the subdivision task environment associated with a session.

SubdivisionTubeBuilder - Interface in nxopen.features.subdivision

Represents a SubdivisionTubeBuilder builder.

subdivStructurePointer - Variable in class nxopen.uf.UFSubdiv.AskParmsData

subdivType - Variable in class nxopen.uf.UFSubdiv.AskParmsData

subdivType1 - Variable in class nxopen.uf.UFSubdiv.DataStructuresUnion

subent - Variable in class nxopen.uf.UFModeling.AskExtremeData

subFeat1Filter() - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder

Returns the filter toggle for the first list of subfeatures
License requirements: None.

subFeat1Name() - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder

Returns the name of the first subfeature
License requirements: None.

subFeat1Select() - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder

Returns the first subfeature selection button
License requirements: None.

subFeat1StateEnum() - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder

Returns the state of features in the first subfeature list
License requirements: None.

subFeat2Filter() - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder

Returns the filter toggle for the second list of subfeatures
License requirements: None.

subFeat2Name() - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder

Returns the name of the first subfeature
License requirements: None.

subFeat2Select() - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder

Returns the second subfeature selection button
License requirements: None.

subFeat2StateEnum() - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder

Returns the state of features in the second subfeature list
License requirements: None.

subfeats - Variable in class nxopen.uf.UFModl.AskLinkedExteriorData

subFeatures - Variable in class nxopen.uf.UFGdt.AskSubFeaturesData

subFileId - Variable in class nxopen.uf.UFTag.DecomposeHandleData

subGraphCountInStack() - Method in interface nxopen.cae.xyplot.Plot

Returns the sub-graph count in a stacked plot.

subGraphInStack() - Method in interface nxopen.cae.xyplot.OverlayParameters

Returns the index of subgraph on a stacked plot, on which the records will be overlaied.

subId - Variable in class nxopen.cae.ElemEdgefaceObject

object sub_component identifier

subId - Variable in class nxopen.cae.SetObject

object sub_component identifier

SubInsertBuilder - Interface in nxopen.tooling

The SubInsert builder
To create a new instance of this class, use SubInsertCollection.createSubInsertBuilder()
Default values.

SubInsertBuilder.Shape - Class in nxopen.tooling

Represents the foot shape

SubInsertBuilder.Types - Class in nxopen.tooling

Represents the type of parent part

SubInsertCollection - Interface in nxopen.tooling

Creates SubInsert builder collection
To obtain an instance of this class, refer to ToolingManager

Created in NX6.0.0

subInserts() - Method in interface nxopen.tooling.ToolingManager

Returns the SubInsertCollection instance belonging to this part .

subListObj - Variable in class nxopen.uf.UFKf.AskValueOfListItemData

SUBMARINE - Static variable in class nxopen.cae.responsesimulation.DDAMExcitation.ShipType

SUBMENU - Static variable in class nxopen.menubar.ContextMenuEntry.Type

Has an attached menu structure containing more entries.

submitOptions() - Method in interface nxopen.cae.DurabilityEventSolverBuilder

Returns the submit options.

submitOptions() - Method in interface nxopen.cae.DurabilitySolverBuilder

Returns the submit options.

subopLabel() - Method in interface nxopen.cam.MoveBuilder

Returns the subop label
License requirements: None.

subopTag - Variable in class nxopen.uf.UFTurn.TeachmodeCreateSubopData

SUBORDINATE - Static variable in class nxopen.assemblies.CollaborativeContentType

Subordinate Design Element in a Workset

SUBORDINATE_DESIGN_ELEMENT - Static variable in class nxopen.issue.IssueAttachment.Type

Subordinate Design Element type

subPillarDefinitionList() - Method in interface nxopen.features.shipdesign.SubSystemsBuilder

Returns the list of Sub Pillar System Definitions.

subPlateDefinitionList() - Method in interface nxopen.features.shipdesign.SubSystemsBuilder

Returns the list of Sub Plate System Definitions.

subProfileDefinitionList() - Method in interface nxopen.features.shipdesign.SubSystemsBuilder

Returns the list of Sub Profile System Definitions.

subRegion() - Method in interface nxopen.preferences.SessionVisualizationHighQualityImage

Returns the setting for whether the High Quality Image is generated from a sub-region.

subscript() - Method in interface nxopen.annotations.LocatorDesignatorBuilder

Returns the subscript
License requirements: None.

SUBSCRIPT - Static variable in class nxopen.drawings.ViewCommonViewLabelBuilder.SecondaryAlignmentType

subscriptSizeFactor() - Method in interface nxopen.drawings.ViewCommonViewLabelBuilder

Returns the subscript size factor
License requirements: None.

subscriptSizeFactor - Variable in class nxopen.uf.UFDraw.ViewLabelParms

SUBSET - Static variable in class nxopen.assemblies.CollaborativeContentType

Subset

subset() - Method in interface nxopen.assemblies.Component

Returns the Subset that corresponds to this component.

Subset - Interface in nxopen.assemblies

A subset is a set of design elements within a collaborative design.

subset() - Method in interface nxopen.assemblies.SubsetBuilder

Deprecated.

Deprecated in NX11.0.0. Please use SubsetBuilder.getSubsets() instead.

SUBSET - Static variable in class nxopen.BasePart.CollaborativeContentType

Subset

SUBSET - Static variable in class nxopen.features.shipdesign.PenetrationUtils.Referencetype

SUBSET - Static variable in class nxopen.issue.IssueAttachment.Type

Subset type

Subset.ContentType - Class in nxopen.assemblies

Represents the content type for a subset.

Subset.PartitionViewStyleType - Class in nxopen.assemblies

Represents the type of partition view style to show for a subset.

SubsetBuilder - Interface in nxopen.assemblies

A SubsetBuilder is used to create or edit an Subset .

SubsetCollection - Interface in nxopen.assemblies

Represents a collection of subset.

subsetConfiguration() - Method in interface nxopen.assemblies.SubsetBuilder

Deprecated.

Deprecated in NX9.0.0. Use SubsetBuilder.configurationContext() instead.

SubsetConfigurationBuilder - Interface in nxopen.assemblies

A SubsetConfigurationBuilder is used to edit the revision rule and effectivity used to configure the contents of the subset.

subsetDescription() - Method in interface nxopen.assemblies.SubsetBuilder

Deprecated.

Deprecated in NX11.0.0. Use LogicalObject properties instead.

subsetName() - Method in interface nxopen.assemblies.SubsetBuilder

Deprecated.

Deprecated in NX11.0.0. Use LogicalObject properties instead.

subsetPart() - Method in interface nxopen.weld.WeldJointBuilder

Returns the subset part where Design Control Elements are to be created
License requirements: None.

SubsetRecipe - Interface in nxopen.assemblies

A subset recipe is used by a SubsetBuilder to collect SearchTerm s.

subsets() - Method in interface nxopen.assemblies.ComponentAssembly

The collection of Subset s defined in the ComponentAssembly
Created in NX8.5.0

subsetType() - Method in interface nxopen.assemblies.Subset

Returns the type of plm object used to create subset.

subsetType() - Method in interface nxopen.assemblies.SubsetBuilder

Returns the type of PLM object used to create subset.

SUBSPACE_MODOPT - Static variable in class nxopen.uf.UFConstants

SubstepData() - Constructor for class nxopen.cae.optimization.TBSLoadCase.SubstepData

substeps - Variable in class nxopen.cae.optimization.TBSLoadCase.SubstepData

substituteComponent(Component, BasePart, String, String, int, ComponentAssembly.SubstitutionMode) - Method in interface nxopen.assemblies.ComponentAssembly

Substitutes an old component with a new component.

substituteComponent(Tag, String, String, String, int) - Method in interface nxopen.uf.UFAssem

Refer to UF_ASSEM_substitute_component for documentation.

SubstituteComponentData() - Constructor for class nxopen.uf.UFAssem.SubstituteComponentData

substituteFastenerStack(int, int, FastenerAssy.StackTypeMethod, String, String, String, String, String, String) - Method in interface nxopen.tooling.FastenerAssy

Substitutes fastener stack
License requirements: None.

substring - Variable in class nxopen.uf.UFDrf.GetTextSubstringData

substringCharacteristic - Variable in class nxopen.uf.UFDrf.GetTextSubstringData

substringPosition - Variable in class nxopen.uf.UFDrf.GetTextSubstringData

subSystem() - Method in interface nxopen.features.shipdesign.SubSystemBuilder

Returns the faces or curves that make up the sub system.

SubSystemBuilder - Interface in nxopen.features.shipdesign

This class is used to edit the Sub System Definition of a SubSystems feature.

SubSystemBuilderList - Interface in nxopen.features.shipdesign

Represents a list of objects.

SubSystems - Interface in nxopen.features.shipdesign

Represents a sub systems feature.

SubSystemsBuilder - Interface in nxopen.features.shipdesign

This class is used to edit a SubSystems feature.

SubSystemsBuilder.Types - Class in nxopen.features.shipdesign

Used to indicate the type of sub system definition that is being edited.

subtitle() - Method in interface nxopen.cae.ResultType

Returns the subtitle defined for the result type in the result file
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

subtituteReusableComponent(boolean) - Method in interface nxopen.tooling.AddReusablePart

Subtitutes a reusable part
License requirements: None.

SUBTRACT - Static variable in class nxopen.cae.AfuMathOperation.MultiType

Subtracts AFU records

SUBTRACT - Static variable in class nxopen.die.DieBooleanBuilder.BooleanType

Subtract the solids from the application solid.

SUBTRACT - Static variable in class nxopen.features.Feature.BooleanType

Subtract

SUBTRACT - Static variable in class nxopen.features.PasteFaceBuilder.PasteOptionType

each tool body will subtract from the target body.

Subtract - Interface in nxopen.features

Deprecated.

Deprecated in NX4.0.0. Use BooleanFeature instead.

SUBTRACT - Static variable in class nxopen.geometricutilities.BooleanOperation.BooleanType

Subtract

SUBTRACT - Static variable in class nxopen.tooling.PocketBuilder.ModeType

do subtract

SUBTRACT - Static variable in class nxopen.tooling.ReusableObjectPasteBuilder.PasteMethods

Subtract

SUBTRACT - Static variable in class nxopen.tooling.ReusablePocketBuilder.Hole

Subtract pocket

subtract() - Method in interface nxopen.tooling.SolidPatchBuilder

Returns the toggle for indicating if the tool is subtracted by the target or not.

SUBTRACT - Static variable in class nxopen.tooling.TrimSolidBuilder.TrimSolidAction

Action to do subtract.

SUBTRACT - Static variable in class nxopen.uf.UFModl.FeatureSigns

SUBTRACT_OVERALL_WORKPIECES - Static variable in class nxopen.tooling.MoldInsertBuilder.BooleanType

subtract overall

subtractBodies(Tag, Tag) - Method in interface nxopen.uf.UFModeling

Refer to UF_MODL_subtract_bodies for documentation.

SubtractBodiesData() - Constructor for class nxopen.uf.UFModeling.SubtractBodiesData

subtractBodiesWithRetainedOptions(Tag, Tag, boolean, boolean) - Method in interface nxopen.uf.UFModeling

Refer to UF_MODL_subtract_bodies_with_retained_options for documentation.

subType - Variable in class nxopen.cae.ElemEdgefaceObject

object sub_component type

subType - Variable in class nxopen.cae.SetObject

object sub_component type

subtype - Variable in class nxopen.cam.Tool.TypeAndSubtypeData

tool subtype

subtype() - Method in interface nxopen.features.HoleFeatureBuilder

Returns the type of hole
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.

subtype() - Method in interface nxopen.features.RPODimension

Returns the subtype of the dimension.

subtype() - Method in interface nxopen.geometricutilities.CircularFrameBuilder

Returns the subtype
License requirements: None.

subtype() - Method in interface nxopen.geometricutilities.QuadrilateralFrameBuilder

Returns the subtype
License requirements: None.

subtype() - Method in interface nxopen.geometricutilities.TriangularFrameBuilder

Returns the subtype
License requirements: None.

subtype - Variable in class nxopen.Selection.MaskTriple

Object subtype.

subType() - Method in interface nxopen.tooling.LayoutBuilder

Returns the layout transform type
License requirements: None.

subtype - Variable in class nxopen.uf.UFCutter.AskTypeAndSubtypeData

subtype - Variable in class nxopen.uf.UFFam.AttributeData

subtype - Variable in class nxopen.uf.UFFam.ClassData

subtype - Variable in class nxopen.uf.UFFam.FamilyData

subtype - Variable in class nxopen.uf.UFModeling.AskChamferParmsData

subtype - Variable in class nxopen.uf.UFObj.AskExtendedTypeAndSubtypeData

subtype - Variable in class nxopen.uf.UFObj.AskTypeAndSubtypeData

subtype - Variable in class nxopen.uf.UFSket.Info

subtype - Variable in class nxopen.uf.UFView.AskTypeData

subtypes - Variable in class nxopen.uf.UFCam.OptAskSubtypesData

SUCCESS - Static variable in class nxopen.assemblies.ClearanceSet.PenetrationDepthResult

SUCCESS - Static variable in class nxopen.assemblies.DegreesOfFreedomResult

The degrees of freedom calculation succeeded.

success - Variable in class nxopen.cam.CAMSetup.RetrieveToolData

success - Variable in class nxopen.cam.InspectionSetup.RetrieveToolData

success - Variable in class nxopen.cam.NCAssistantBuilder.ResultsData

success or not

SUCCESS - Static variable in class nxopen.features.SketchConversionStatus.Type

Convert to sketch successful

SUCCESS - Static variable in class nxopen.geometricanalysis.GeometricProperties.Status

Success

SUCCESS - Static variable in class nxopen.mechanicalrouting.PartPlacementBuilder.PlacementValidationStatus

part placement is successful as expected

SUCCESS - Static variable in class nxopen.routing.Run.FlipStatus

Component is flipped.

SUCCESS - Static variable in class nxopen.RuleManager.InitializationStatusType

Initialization succeeded

success - Variable in class nxopen.sim.IsvControlPanelBuilder.MachineControlReadVariableData

success - Variable in class nxopen.weld.WeldJointBuilder.MidPointInformationData

Equals true if data was returned.

SUCCESSFULLY_OPENED - Static variable in class nxopen.assemblies.ComponentAssembly.OpenComponentStatus

The component was opened as expected

SUCCESSIVE - Static variable in class nxopen.motion.DriverMotionsData.DriverRotationType

Rotations are applied to the rotated link (as defined by previous rotations)

SUFFIX - Static variable in class nxopen.annotations.ChamferSymbolPlacement

5 x 5 CHAM

suffix() - Method in interface nxopen.annotations.TableCellStyleBuilder

Returns the suffix
License requirements: None.

SUFFIX - Static variable in class nxopen.annotations.TrueLengthTextPosition

Display True Length Text after dimension value

suffix() - Method in interface nxopen.routing.BranchPathNumberingBuilder

Returns the suffix specified in the UI for the labels
License requirements: routing_hvac ("Routing HVAC")
.

SUFFIX - Static variable in class nxopen.tooling.RenameAndExportComponentBuilder.NamingRuleType

suffix - Variable in class nxopen.uf.UFTabnot.CellPrefs

suffixStr() - Method in interface nxopen.pdm.PartOperationImportBuilder

Returns the suffix str
License requirements: None.

suggestScaleFactor() - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder

Returns a value indicating whether to use automatic scale factor
License requirements: studio_free_form ("STUDIO FREE FORM")
.

SUM - Static variable in class nxopen.cae.AxiSymmetricParameters.EnvVal

SUM - Static variable in class nxopen.cae.CyclicSymmetricParameters.EnvelopeValue

SUM - Static variable in class nxopen.cae.optimization.TBSBaseDesignVariableBuilder.GroupOperator

Sum of all values of the selection area

SUM - Static variable in class nxopen.cae.optimization.TBSLoadCaseManager.SelectionType

Sum of the selected load cases

SUM - Static variable in class nxopen.cae.Post.NodeValueSharingCriterion

SUM - Static variable in class nxopen.cae.PostGraphAcrossIterationsBuilder.CombinationMethod

SUM - Static variable in class nxopen.cae.PostGraphBuilder.GeometryValue

SUM - Static variable in class nxopen.cae.PostGraphBuilder.NodalCombination

SUM - Static variable in class nxopen.cae.Result.ComputationType

compute sum.

SUM - Static variable in class nxopen.cae.ResultProbeBuilder.CombineAcrossEntities

SUM - Static variable in class nxopen.cae.ResultProbeBuilder.CombineAcrossIterations

SUM - Static variable in class nxopen.cae.ResultProbeBuilder.GeometryValue

SUM - Static variable in class nxopen.cae.ResultProbeBuilder.NodalCombination

SUM - Static variable in class nxopen.cae.ResultsManipulationBuilder.ElementValueAtNode

SUM - Static variable in class nxopen.preferences.RoutingPart.StockLengthDisplay

Display single sum for each type of stock.

SUM_COMPLEX - Static variable in class nxopen.cae.AfuMathOperation.Overall

Gets complex sum values of AFU records

SUM_MAGNITUDE - Static variable in class nxopen.cae.AfuMathOperation.Overall

Gets sum magnitude values of AFU records

SUMMARY - Static variable in class nxopen.annotations.BillOfMaterialBuilder.DetailLevelType

Summary() - Constructor for class nxopen.assemblies.ClearanceSet.Summary

Summary(int, int, int, int, ClearanceAnalysisBuilder.CalculationMethodType, int, int, int, int, int, int, int, int, int, int, int, int, int, int, int, int, int, int, ClearanceSet.JobStatus, int) - Constructor for class nxopen.assemblies.ClearanceSet.Summary

Constructor for the Summary object.

SUMMARY - Static variable in class nxopen.preferences.RoutingPart.DetailLevel

Summary() - Constructor for class nxopen.uf.UFClear.Summary

Summary(int, int, int, int, int, int, int, int, int, int, int, int, int, int, int, int, int, int, int, int, int, int, int, int, int) - Constructor for class nxopen.uf.UFClear.Summary

SUMMARY_ONLY - Static variable in class nxopen.cae.ProjectNodesToCadGeometryBuilder.ListingOption

List only Summary information

summaryStatusLine() - Method in interface nxopen.drawings.CompareReportBuilder

Returns the report summary status line
License requirements: None.

SUMMERY - Static variable in class nxopen.routing.RouteManager.BomLevel

sumProps(int, UFWeight.Properties[]) - Method in interface nxopen.uf.UFWeight

Refer to UF_WEIGHT_sum_props for documentation.

sunRoof() - Method in interface nxopen.features.vehicledesign.HeadImpactFrontHeaderWizardBuilder

Returns the sun roof opening geometry.

SUPER_ELEMENT - Static variable in class nxopen.cae.FEModelOccAttribute.RepType

Alternate rep is a superelement

SUPER_FINE - Static variable in class nxopen.display.FacetSettingsBuilder.AdvVisToleranceSetting

SUPER_FINE - Static variable in class nxopen.fields.DisplayPropertiesBuilder.DispResolutionEnum

SUPER_FINE - Static variable in class nxopen.geometricanalysis.HighlightLinesAnalysisBuilder.Resolutions

Super Fine

SUPER_FINE - Static variable in class nxopen.ListCreator.ResolutionType

SuperFine

SUPER_FINE - Static variable in class nxopen.preferences.SessionModeling.PreviewResolutionType

SUPERFINE - Static variable in class nxopen.preferences.PartVisualizationShade.AdvViewToleranceType

Superfine

superIterationType() - Method in interface nxopen.cae.ResultProbeBuilder

Returns the query curve options
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

SuperPoint - Interface in nxopen.blockstyler

Represents a Super Point block .

superSample - Variable in class nxopen.uf.UFDisp.ShadeOptions

SuperSection - Interface in nxopen.blockstyler

Represents a Super Section block .

supplementarySymbol() - Method in interface nxopen.annotations.LineWeldSideData

Returns the weld supplementary symbol
License requirements: None.

SupplementarySymbol - Class in nxopen.annotations

Specifies the supplementary weld symbol

supplyPressure() - Method in interface nxopen.mechatronics.HydraulicValveBuilder

Returns the initial supply pressure.

supplyPressure() - Method in interface nxopen.mechatronics.PneumaticValveBuilder

Returns the initial supply pressure.

SUPPORT - Static variable in class nxopen.features.shipdesign.UpdateShipLibraryBuilder.ShipLibOptionType

SUPPORT_CAP - Static variable in class nxopen.features.shipdesign.UpdateShipLibraryBuilder.ShipLibOptionType

supportAllPids() - Method in interface nxopen.cae.WeldBuilder

Returns the option to include all PIDs within the search distance for creating welds
License requirements: None.

supportCapOptions() - Method in interface nxopen.features.shipdesign.PillarBuilder

Returns the support cap options.

supportCapOptions() - Method in interface nxopen.features.shipdesign.SteelSupportBuilder

Returns the support cap options
License requirements: None.

supportCrossSectionButton() - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder

TODO: fill in a description for this
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

supportFaces() - Method in interface nxopen.features.GeodesicSketchBuilder

Returns the collector of support faces.

supportFaces() - Method in interface nxopen.features.SmoothCurveStringBuilder

Returns the optional support faces.

supportPlane() - Method in interface nxopen.geometricutilities.SupportPlaneData

Returns the support plane
License requirements: None.

supportPlaneData() - Method in interface nxopen.features.AssociativeArcBuilder

Returns the support plane data
License requirements: None.

supportPlaneData() - Method in interface nxopen.features.AssociativeLineBuilder

Returns the support plane data
License requirements: None.

SupportPlaneData - Interface in nxopen.geometricutilities

Represents a SupportPlaneData
Created in NX5.0.0

SupportPlaneData.LockPlaneStatus - Class in nxopen.geometricutilities

Represents support plane lock status for associative basic curves

supportPlaneLockStatus() - Method in interface nxopen.geometricutilities.SupportPlaneData

Returns the support plane lock status
License requirements: None.

supportsFromCeiling() - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder

Returns the supports from ceiling
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

supportSize() - Method in interface nxopen.features.shipdesign.SteelSupportBuilder

Returns the support size.

supportStereo() - Method in interface nxopen.preferences.SessionVisualizationSpecialEffects

Returns the support stereo flag.

supportType() - Method in interface nxopen.features.shipdesign.SteelSupportBuilder

Returns the support type.

suppress() - Method in interface nxopen.assemblies.Component

Suppresses the component in the ComponentAssembly that contains its controlling Arrangement.

suppress(Component[]) - Method in interface nxopen.assemblies.Component

Suppresses an array of components in the ComponentAssembly that contains their controlling Arrangement.

suppress() - Method in interface nxopen.assemblies.ComponentPattern

Suppresses the component pattern object.

suppress() - Method in interface nxopen.cam.Cutcom

Returns the suppress cutter compensation
License requirements: None.

suppress() - Method in interface nxopen.drawings.BrokenViewBuilder

Returns the view break suppress status
License requirements: None.

suppress() - Method in interface nxopen.features.Feature

Suppress the feature
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

SUPPRESS - Static variable in class nxopen.Update.FailureOption

Suppress failing object

SUPPRESS - Static variable in class nxopen.userdefinedobjects.UserDefinedEvent.Reason

Suppress/Unsuppress UDO event

SUPPRESS_ALL - Static variable in class nxopen.cam.SimulationOptionsBuilder.SimulationDisplayMode

suppress graphics and NC program updates

SUPPRESS_ALL - Static variable in class nxopen.Update.FailureOption

Suppress failing objects and subsequent objects

SUPPRESS_GRAPHICS - Static variable in class nxopen.cam.SimulationOptionsBuilder.SimulationDisplayMode

suppress graphics updates

suppressAction() - Method in interface nxopen.SuppressByExpressionBuilder

Returns the suppress expression action.

suppressAllFeatureAfter(NXObject, boolean) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder

Suppress child feature.

suppressAngularZerosOption() - Method in interface nxopen.annotations.UnitsFormatPreferences

Returns the angular dimension suppress zeros option
License requirements: None.

suppressArray(Tag) - Method in interface nxopen.uf.UFAssem

Refer to UF_ASSEM_suppress_array for documentation.

suppressBasedOnVolume() - Method in interface nxopen.cam.MinCutVolume

Returns the suppress path if less than minimum toggle
License requirements: None.

SuppressByExpressionBuilder - Interface in nxopen

Represents a SuppressByExpressionBuilder
To create a new instance of this class, use ExpressionCollection.createSuppressByExpressionBuilder()
Default values.

SuppressByExpressionBuilder.ExpressionAction - Class in nxopen

Represents the expression action type.

suppressChildren() - Method in interface nxopen.features.CurveFeature

Returns the suppress children of the feature
License requirements: None.

suppressComponents(Component[], Arrangement[]) - Method in interface nxopen.assemblies.ComponentAssembly

Suppresses an array of components
License requirements: assemblies ("ASSEMBLIES MODULE")
.

suppressComponents(Component[]) - Method in interface nxopen.assemblies.ComponentAssembly

Suppresses an array of components in all Arrangement s in this ComponentAssembly
License requirements: assemblies ("ASSEMBLIES MODULE")

Created in NX3.0.0

suppressComponents(Component[], Arrangement[], String) - Method in interface nxopen.assemblies.ComponentAssembly

Suppresses an array of components in all Arrangement s in this ComponentAssembly
License requirements: assemblies ("ASSEMBLIES MODULE")

Created in NX5.0.1

suppressCutcom() - Method in interface nxopen.cam.NcmHoleMachining

Returns the suppress cutter compensation
License requirements: None.

suppressCutcom() - Method in interface nxopen.cam.NcmPlanarBuilder

Returns the suppress cutter compensation
License requirements: None.

SUPPRESSED - Static variable in class nxopen.assemblies.ComponentAssembly.SuppressedState

Suppressed

suppressed() - Method in interface nxopen.features.Feature

Returns the suppression status of the feature
License requirements: None.

SUPPRESSED - Static variable in class nxopen.features.SketchConversionStatus.ReasonType

A suppressed feature cannot be converted into an independent sketch

SUPPRESSED - Static variable in class nxopen.positioning.ComponentConstraint.DirectionToFixed

The constraint is suppressed

SUPPRESSED - Static variable in class nxopen.positioning.Constraint.SolverStatus

Constraint is suppressed

suppressed() - Method in interface nxopen.positioning.Constraint

Returns the suppression state for the constraint.

suppressed - Variable in class nxopen.uf.UFAssem.AskPartOccSuppressStateData

SUPPRESSED_BY_EXP - Static variable in class nxopen.assemblies.ComponentAssembly.SuppressedState

Suppressed by expression

suppressedstate - Variable in class nxopen.assemblies.ComponentAssembly.SuppressedStateData

The suppressed state

SuppressedStateData() - Constructor for class nxopen.assemblies.ComponentAssembly.SuppressedStateData

suppressFeature(Tag[]) - Method in interface nxopen.uf.UFModeling

Refer to UF_MODL_suppress_feature for documentation.

suppressFeatures(Feature[]) - Method in interface nxopen.features.FeatureCollection

Suppress the given features
License requirements: solid_modeling ("SOLIDS MODELING")
.

SuppressHoleBuilder - Interface in nxopen.cae

Builder for creating Hole Suppression Hole
To create a new instance of this class, use AbstractionManager.createSuppressHoleBuilder()
Default values.

SuppressHoleBuilder.OptionChoice - Class in nxopen.cae

the enum for method

SuppressHoleBuilder.OptionPointCreate - Class in nxopen.cae

the enum for point creation

suppressHoleDiameterValue - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms

suppressHolePointType - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms

suppressHoleToggle - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms

suppressingArrangement() - Method in interface nxopen.assemblies.Component

Returns the Arrangement that controls this component's suppression state.

suppressInstances(int, Tag[]) - Method in interface nxopen.uf.UFAssem

Refer to UF_ASSEM_suppress_instances for documentation.

SUPPRESSION_CONTROL_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption

The suppression control of the component

suppressPartingButton() - Method in interface nxopen.tooling.MWDefineSheetsBuilder

Button for suppressing parting
License requirements: None.

suppressPathDisplayFlag() - Method in interface nxopen.cam.OperationDisplayOptionsBuilder

Returns the suppress path display flag
License requirements: None.

suppressPortConstraint(Port, boolean) - Method in interface nxopen.routing.ClockPartBuilder

Suppress the constraind applied to the selected Port
License requirements: routing_base ("Routing Basic")

Created in NX7.5.0

suppressRegionSheet(String) - Method in interface nxopen.tooling.MWDefineSheetsBuilder

Suppress the region sheet
License requirements: None.

suppressSurfaceModification() - Method in interface nxopen.preferences.SessionNXGateway

Returns the suppress surface modification flag.

suppressViewBreaks(DraftingView) - Method in interface nxopen.drawings.DraftingViewCollection

Suppress all view breaks of the view.

suppressWarningMessages() - Method in interface nxopen.VRMLImporter

Returns the Suppress Warning Messages flag.

suppressWarnings - Variable in class nxopen.uf.UFStd.VrmlParams

SURF - Static variable in class nxopen.InferSnapType.SnapType

Snap point on surface

SURFACE - Static variable in class nxopen.cae.optimization.TBSCastCondition.MiddlePlaneType

The elements are demolded at the actual surface of the restrict area

SURFACE - Static variable in class nxopen.cae.responsesimulation.DDAMExcitation.ShipType

SURFACE - Static variable in class nxopen.cae.xyplot.GraphStyle

Option to display plot in surface style

SURFACE - Static variable in class nxopen.cam.CamInspectionOperationFeaturetypes

Surface

SURFACE - Static variable in class nxopen.cam.DmBndBuilder.ApplyFilletAtTypes

Part Surface

surface() - Method in interface nxopen.cam.DrillSurfaceBuilder

Returns the selected surface,surface entity type covers Xform,Plane and Face
License requirements: None.

SURFACE - Static variable in class nxopen.cam.InspectionConstructedFeatureBuilder.ConstFeatType

Constructed Surface Feature

SURFACE - Static variable in class nxopen.cam.InspectionMethodBuilder.MethodTypes

Surface

SURFACE - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamSubType

Surface

surface() - Method in interface nxopen.cam.SurfaceDriveGeometrySet

Returns the surface
License requirements: None.

SURFACE - Static variable in class nxopen.die.OutputCurvesBuilder.TrimCurveCreateTypes

Surface.

surface() - Method in interface nxopen.features.shipdesign.RollingLineBuilder

Returns the collection of faces that represent the surface to be analyzed.

surface() - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder

Returns the surface that the templates will be built to.

SURFACE - Static variable in class nxopen.features.vehicledesign.BumperPendulumBuilder.VisualizationType

SURFACE - Static variable in class nxopen.features.vehicledesign.DynamicCurbBuilder.VisualizationType

SURFACE - Static variable in class nxopen.features.vehicledesign.GroundClearanceBuilder.VisualizationTypes

SURFACE - Static variable in class nxopen.features.vehicledesign.InnerAngleBuilder.VisualizationType

SURFACE - Static variable in class nxopen.features.vehicledesign.OilPanBuilder.VisualizationType

SURFACE - Static variable in class nxopen.features.vehicledesign.SlopeBuilder.VisualizationType

SURFACE - Static variable in class nxopen.features.vehicledesign.StaticCurbBuilder.VisualizationType

Surface

SURFACE - Static variable in class nxopen.fields.DisplayPropertiesBuilder.DepDispTypeEnum

SURFACE - Static variable in class nxopen.fields.SpatialMap.SubtypeEnum

3D degenerate to surface

SURFACE - Static variable in class nxopen.motion.BodyContactRecurdyn.ContactType

SURFACE - Static variable in class nxopen.motion.RoadBuilder.TypeChoices

Surface

SURFACE - Static variable in class nxopen.weld.WeldSelectionType

surface

SURFACE_ABSOPTIVITY - Static variable in class nxopen.cae.Result.Quantity

SURFACE_ALL - Static variable in class nxopen.uf.UFBrep.GeomType

SURFACE_ANALYSIS_HORIZON - Static variable in class nxopen.display.TrueShadingBuilder.EnvironmentMapType

Surface Analysis Horizontal Lines Reflection

SURFACE_ANALYSIS_LINES - Static variable in class nxopen.display.TrueShadingBuilder.EnvironmentMapType

Surface Analysis Lines Reflection

SURFACE_AREA - Static variable in class nxopen.cam.SurfaceContourBuilder.DriveMethodTypes

Surface Area

SURFACE_AREA_DRIVE - Static variable in class nxopen.cam.Preferences.GeometryTypes

surface area drive geometry

SURFACE_COUNT - Static variable in class nxopen.uf.UFGdt.ModifierTypes

SURFACE_DATUM_LOCATION - Static variable in class nxopen.uf.UFConstants

SURFACE_DATUM_LOCATION_NON_ASSOC - Static variable in class nxopen.uf.UFConstants

SURFACE_DEMOLD - Static variable in class nxopen.cae.optimization.TBSShapeLinkCondition.ManufacturingOption

Demold surface definition

SURFACE_DENSITY - Static variable in class nxopen.cae.Result.Quantity

SURFACE_DRILL - Static variable in class nxopen.cae.optimization.TBSShapeLinkCondition.ManufacturingOption

Drillable surface definition

SURFACE_EDGES - Static variable in class nxopen.fields.DisplayPropertiesBuilder.DepDispTypeEnum

SURFACE_EMISSIVITY - Static variable in class nxopen.cae.Result.Quantity

SURFACE_FINISH - Static variable in class nxopen.annotations.PmiFilterByType.Type

Indicates a PMI surface finish type

SURFACE_FINISH - Static variable in class nxopen.annotations.SearchModelViewBuilder.PmiTypes

surface finish type

SURFACE_FINISH_SYMBOL - Static variable in class nxopen.drawings.AnnotationSettingsBuilder.AnnotationTypeEnum

SURFACE_FINISH_TYPE - Static variable in class nxopen.uf.UFPd.AttributeType

SURFACE_JOINT - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSymbolType

SURFACE_JOINT - Static variable in class nxopen.annotations.Symbol

Specifies surface joint weld symbol (ISO and DIN only )

SURFACE_MEASUREMENT_LOCATION - Static variable in class nxopen.uf.UFConstants

SURFACE_MEASUREMENT_LOCATION_NON_ASSOC - Static variable in class nxopen.uf.UFConstants

SURFACE_NORMAL - Static variable in class nxopen.weld.JointmarkBuilder.OrientationMethodTypes

Surface Normals.

SURFACE_OF_REVOLUTION - Static variable in class nxopen.cam.CamInspectionOperationFeaturetypes

Surface of Revolution

SURFACE_OF_REVOLUTION - Static variable in class nxopen.cam.InspectionMethodBuilder.MethodTypes

Surface of Revolution

SURFACE_OF_REVOLUTION - Static variable in class nxopen.Face.FaceType

Face from surface of revolution

SURFACE_OF_REVOLUTION - Static variable in class nxopen.IgesCreator.MapRevolvedFacesOption

exported revolved faces as surface of revolution

SURFACE_PERCENT - Static variable in class nxopen.cam.DmRotaryFloorFinishBuilder.DmSurfCutAreaType

Surface %

SURFACE_PERCENT - Static variable in class nxopen.cam.DmSurfBuilder.DmSurfCutAreaType

Surface %

SURFACE_PROFILE - Static variable in class nxopen.annotations.GeometricCharacteristic

Specifies surface profile characteristics

SURFACE_PROFILE - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.TolType

Profile of Surface

SURFACE_PROFILE_TYPE - Static variable in class nxopen.uf.UFGdt.Characteristic

SURFACE_REGION - Static variable in class nxopen.cam.Preferences.AuxiliaryFloorColorSelectionTypes

Deprecated.

Surface Region

SURFACE_REGION - Static variable in class nxopen.cam.Preferences.BlankSelectionTypes

Deprecated.

Surface Region

SURFACE_REGION - Static variable in class nxopen.cam.Preferences.CutAreaSelectionTypes

Deprecated.

Surface Region

SURFACE_REGION - Static variable in class nxopen.cam.Preferences.PartSelectionTypes

Deprecated.

Surface Region

SURFACE_REGION - Static variable in class nxopen.cam.Preferences.WallSelectionTypes

Deprecated.

Surface Region

SURFACE_REGION_FEATURES - Static variable in class nxopen.cam.Preferences.SelectionTypes

surface region features

SURFACE_SPEED - Static variable in class nxopen.cam.FeedsBuilder.RecalcuateBasedOn

surface speed

SURFACE_STAMP - Static variable in class nxopen.cae.optimization.TBSShapeLinkCondition.ManufacturingOption

Stampable surface definition

SURFACE_TO_SURFACE - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ContactType

The draw components contact type is surface to surface.

SURFACE_TURN - Static variable in class nxopen.cae.optimization.TBSShapeLinkCondition.ManufacturingOption

Turnable surface definition

SURFACE_VECTOR - Static variable in class nxopen.uf.UFConstants

SURFACE_WELD - Static variable in class nxopen.weld.CharacteristicsBuilder.Type

SURFACE_WELD - Static variable in class nxopen.weld.WeldObjectBuilder.CommandName

Surface Weld command

SurfaceAnalysisDisplay - Interface in nxopen.geometricanalysis

Represents a tool control whether to show a surface's poles and knots
To obtain an instance of this class, refer to AnalysisObjectCollection

Created in NX6.0.0

SurfaceAnalysisDisplay.ShowFlagType - Class in nxopen.geometricanalysis

Show flag types

surfaceAnalysisDisplayObject() - Method in interface nxopen.geometricanalysis.AnalysisObjectCollection

Returns object for displaying surface analysis information .

surfaceAngleAcceptableColor() - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder

Returns the surface angle acceptable color.

surfaceAngleFailureColor() - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder

Returns the surface angle failure color.

surfaceAngleFailureLimit() - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder

Returns the surface angle failure limit.

surfaceAngleWarningColor() - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder

Returns the surface angle warning color.

surfaceAngleWarningLimit() - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder

Returns the surface angle warning limit.

surfaceAngularTolerance - Variable in class nxopen.facet.FacetingParameters

This is the maximum angular variation in radians of the surface normal over the facet.

surfaceAngularTolerance - Variable in class nxopen.uf.UFFacet.Parameters

surfaceArea() - Method in interface nxopen.facet.FacetedBody

Returns the surface area of the faceted body in part units for its highest level of detail.

surfaceBuildMethod() - Method in interface nxopen.die.AddendumSectionBuilder

Returns the addendum surface build method.

SurfaceCoatBuilder - Interface in nxopen.cae

Builder for creating Surface Coat
To create a new instance of this class, use MeshManager.createSurfaceCoatBuilder(nxopen.cae.MeshShellFromSolid)

Created in NX6.0.1

SurfaceCoatBuilder.SelectionMethod - Class in nxopen.cae

Represents the selection method to be used

SurfaceColorOption - Class in nxopen.cae.xyplot

Represents the surface filling color option

SurfaceContinuityAnalysis - Interface in nxopen.geometricanalysis

Represents a SurfaceContinuityAnalysis builder
To create or edit an instance of this class, use SurfaceContinuityAnalysisBuilder

Created in NX6.0.0

SurfaceContinuityAnalysisBuilder - Interface in nxopen.geometricanalysis

Represents a SurfaceContinuityAnalysis builder
To create a new instance of this class, use AnalysisObjectCollection.createSurfaceContinuityAnalysisBuilder(nxopen.DisplayableObject)
Default values.

SurfaceContinuityAnalysisBuilder.CurvatureType - Class in nxopen.geometricanalysis

Curvature types

SurfaceContinuityAnalysisBuilder.ReportingType - Class in nxopen.geometricanalysis

Reporting types

SurfaceContinuityAnalysisBuilder.Types - Class in nxopen.geometricanalysis

Two possible types for the dialog

SurfaceContour - Interface in nxopen.cam

Represents a Surface Contour operation
To create or edit an instance of this class, use SurfaceContourBuilder

Created in NX7.5.0

SurfaceContourBuilder - Interface in nxopen.cam

Represents a SurfaceContour Builder
To create a new instance of this class, use OperationCollection.createSurfaceContourBuilder(nxopen.cam.CAMObject)

Created in NX5.0.0

SurfaceContourBuilder.AccessVectorMethodType - Class in nxopen.cam

Available types for access vector for the contour profile method of surface milling

SurfaceContourBuilder.CleanupTypes - Class in nxopen.cam

Available types for cleanup

SurfaceContourBuilder.CutDirectionTypes - Class in nxopen.cam

The types of the cut direction

SurfaceContourBuilder.DriveMethodTypes - Class in nxopen.cam

Available types for Drive Method

SurfaceData() - Constructor for class nxopen.facet.FacetedFace.SurfaceData

surfaceDatatype() - Method in interface nxopen.motion.RoadBuilder

Returns the surface datatype of the road object
License requirements: mechanisms ("MECHANISMS")
.

surfaceDesignU() - Method in interface nxopen.DxfdwgCreator

Returns the surface design u - this will set the surface density along U direction.

surfaceDesignV() - Method in interface nxopen.DxfdwgCreator

Returns the surface design V - this will set the surface density along V direction.

surfaceDisplay() - Method in interface nxopen.preferences.ViewVisualizationVisual

Deprecated.

Deprecated in NX8.5.0. Use ViewVisualizationVisual.displayAppearance() instead.

SurfaceDisplayOptions() - Constructor for class nxopen.preferences.ViewVisualizationVisual.SurfaceDisplayOptions

Deprecated.

SurfaceDisplayOptions(ViewVisualizationVisual.RenderingStyle, ViewVisualizationVisual.HiddenEdges, boolean, boolean, int, ViewVisualizationVisual.SmoothEdgeFont, ViewVisualizationVisual.SmoothEdgeWidth) - Constructor for class nxopen.preferences.ViewVisualizationVisual.SurfaceDisplayOptions

Deprecated.

Constructor for the SurfaceDisplayOptions object.

surfaceDistanceTolerance - Variable in class nxopen.facet.FacetingParameters

This is the maximum distance from the surface to the facet.

surfaceDistTolerance - Variable in class nxopen.uf.UFFacet.Parameters

SurfaceDriveGeometry - Interface in nxopen.cam

Represents a CAM drive geometry object for surface area .

SurfaceDriveGeometrySet - Interface in nxopen.cam

Represents a geometry set for a CAM object.

SurfaceDriveGeometrySetList - Interface in nxopen.cam

Represents a list of objects.

surfaceExtension() - Method in interface nxopen.preferences.SessionModeling

Returns the surface extension option.

surfaceFileName() - Method in interface nxopen.motion.RoadBuilder

Returns the path and file name of the surface curve
License requirements: mechanisms ("MECHANISMS")
.

SurfaceFinish - Interface in nxopen.annotations

Represents a PMI Surface Finish
To create or edit an instance of this class, use SurfaceFinishBuilder

Created in NX6.0.0

SurfaceFinishBuilder - Interface in nxopen.annotations

Represents a SurfaceFinish builder
To create a new instance of this class, use PmiAttributeCollection.createSurfaceFinishBuilder(nxopen.annotations.SurfaceFinish)

Created in NX6.0.0

SurfaceFinishBuilder.FinishType - Class in nxopen.annotations

the valid types for pmi finish type

SurfaceFinishBuilder.StandardType - Class in nxopen.annotations

the valid types for pmi surface finish standards

surfaceFinishColor() - Method in interface nxopen.annotations.SymbolStyleBuilder

Returns the surface finish symbol color
License requirements: None.

surfaceFinishFont() - Method in interface nxopen.annotations.SymbolStyleBuilder

Returns the surface finish symbol font
License requirements: None.

SurfaceFinishStandard - Class in nxopen.annotations

Specifies the drafting surface finish standard type

surfaceFinishType() - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder

Returns the surface finish type
License requirements: None.

surfaceFinishWidth() - Method in interface nxopen.annotations.SymbolStyleBuilder

Returns the surface finish symbol width
License requirements: None.

SurfaceIntersection - Interface in nxopen.geometricanalysis

Represents a SurfaceIntersection builder
To create or edit an instance of this class, use SurfaceIntersectionBuilder

Created in NX7.5.0

SurfaceIntersectionBuilder - Interface in nxopen.geometricanalysis

Represents a SurfaceIntersection builder
To create a new instance of this class, use AnalysisObjectCollection.createSurfaceIntersectionBuilder(nxopen.DisplayableObject)
Default values.

SurfaceIntersectionBuilder.CalculationTypes - Class in nxopen.geometricanalysis

Enumeration for needle calculation method

SurfaceIntersectionBuilder.DirectionTypes - Class in nxopen.geometricanalysis

Enumeration for needle direction type

SurfaceIntersectionBuilder.LabelValues - Class in nxopen.geometricanalysis

Enumeration for label computation method

SurfaceIntersectionBuilder.NormalTypes - Class in nxopen.geometricanalysis

Enumeration for face normal

SurfaceIntersectionBuilder.ProjectionTypes - Class in nxopen.geometricanalysis

Projection types

SurfaceIntersectionBuilder.ScalingTypes - Class in nxopen.geometricanalysis

Enumeration for needle display type

SurfaceIntersectionBuilder.XyzTypes - Class in nxopen.geometricanalysis

Enumeration for X, Y or Z projection plane

surfaceLength() - Method in interface nxopen.features.vehicledesign.GroundClearanceBuilder

Returns the surface length type which determines the length of the general surface.

surfaceNormalVectorI() - Method in interface nxopen.cam.InspectionEdgePointFeatureBuilder

Returns the surface normal vector I component
License requirements: None.

surfaceNormalVectorJ() - Method in interface nxopen.cam.InspectionEdgePointFeatureBuilder

Returns the surface normal vector J component
License requirements: None.

surfaceNormalVectorK() - Method in interface nxopen.cam.InspectionEdgePointFeatureBuilder

Returns the surface normal vector K component
License requirements: None.

surfaceOffset() - Method in interface nxopen.die.PadChildBuilder

Returns the surface offset of the die pad.

surfaceOffset() - Method in interface nxopen.die.PadParentBuilder

Returns the surface offset of die pads.

surfaceOffset() - Method in interface nxopen.fields.DisplayPropertiesBuilder

Returns the surface offset
License requirements: None.

surfaceOption() - Method in interface nxopen.cam.DrillSurfaceBuilder

Returns the surface option
License requirements: None.

surfaceOrientEnum() - Method in interface nxopen.display.TrueShadingBuilder

Returns the shadow plane surface orientation enum
License requirements: None.

SurfaceParms() - Constructor for class nxopen.uf.UFGdt.SurfaceParms

SurfaceParms(int, Tag[]) - Constructor for class nxopen.uf.UFGdt.SurfaceParms

surfacePointUV() - Method in interface nxopen.features.SnipSurfaceBuilder

Returns the UV values of the picked point on surface
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

surfaceProfile() - Method in interface nxopen.cam.InspectionAnalyzeBuilder

Returns the analysis surface profile fitting type
License requirements: None.

surfaceProfileMode() - Method in interface nxopen.cam.InspectionMethodBuilder

Returns the analysis surface profile fitting mode
License requirements: None.

surfaceProfileModeBuilder() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder

Returns the Surface Profile Mode Builder
License requirements: None.

surfaceRange() - Method in interface nxopen.features.StudioXformBuilder

Deprecated.

Deprecated in NX8.5.0. Use StudioXformBuilderEx instead.

surfaceRange() - Method in interface nxopen.features.StudioXformBuilderEx

Returns the surface range
License requirements: None.

surfaceRange() - Method in interface nxopen.features.StyledSweepBuilder

Returns the surface range
License requirements: None.

surfaceRange() - Method in interface nxopen.tooling.EnlargeSurfaceBuilder

Returns the surface range data, which controls the enlarged parameters of surface.

surfaceRange() - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder

Returns the surface range for enlarging surface.

surfaceRange() - Method in interface nxopen.tooling.SplitSolidBuilder

Returns the utility to get enlarged parameters.

SurfaceRangeBuilder - Interface in nxopen.geometricutilities

Represents the surface range and anchor builder .

SurfaceRangeBuilder.AnchorPositionType - Class in nxopen.geometricutilities

Represents the anchor position type

surfaceRangeControl() - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder

Returns the surface range
License requirements: studio_free_form ("STUDIO FREE FORM")
.

SurfaceRebuildData - Interface in nxopen

Represents surface rebuild data structure.

SurfaceRebuildData.Type - Class in nxopen

Surface rebuild types.

surfaceRegionName() - Method in interface nxopen.cam.SurfaceRegions

Returns the surface region name
License requirements: None.

SurfaceRegions - Interface in nxopen.cam

Represents a Surface Regions Builder
To create a new instance of this class, use CAMSetup.createSurfaceRegions(nxopen.features.Feature)

Created in NX8.0.0

SurfaceRegions.CreateRegionsTypes - Class in nxopen.cam

enum for create regions

SurfaceRegions.FeatureTypes - Class in nxopen.cam

enum for feature type

SURFACES - Static variable in class nxopen.cam.InspectionPatternFeatureBuilder.FeatureFilterTypes

Only surface inspection features will be listed

surfaces() - Method in interface nxopen.ObjectTypeSelector

Returns the surfaces - This should be set to true if surfaces are desired in the output file
License requirements: None.

surfaceSelection() - Method in interface nxopen.cae.CircularImprintBuilder

Returns the selected surface object(s)
License requirements: None.

surfaceSensitivityMode() - Method in interface nxopen.cam.TurnFeatureGeomBuilder

Returns the surface sensitivity mode
License requirements: cam_base ("CAM BASE")
.

surfaceSensitivityTolerance() - Method in interface nxopen.cam.TurnFeatureGeomBuilder

Returns the surface sensitivity tolerance
License requirements: cam_base ("CAM BASE")
.

surfaceShapeOption() - Method in interface nxopen.features.ExtendSheetBuilder

Returns the method by which the surface is extended which defines the shape
License requirements: None.

surfaceShapeOption() - Method in interface nxopen.features.TrimAndExtendBuilder

Returns the extension method
License requirements: None.

surfaceSpeedBuilder() - Method in interface nxopen.cam.FeedsBuilder

Returns the surface_speed builder (inheritable Double)
License requirements: cam_base ("CAM BASE")
.

surfaceSpeedBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder

Returns the surface_speed builder (inheritable Double)
License requirements: cam_base ("CAM BASE")
.

SurfaceStyleSetting - Interface in nxopen.cae.xyplot

Represents the surface display style.

surfaceTag - Variable in class nxopen.uf.UFModlFeatures.CreateSurfFromCloudData

surfaceTolerance() - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder

Returns the surface tolerance.

surfaceType() - Method in interface nxopen.bodydes.OnestepUnformBuilder

Returns the surface type used to determine offset direction.

surfaceType() - Method in interface nxopen.die.TrimLineDevelopmentBuilder

Returns the surface type used to determine offset direction.

surfaceType() - Method in interface nxopen.features.ExtractFaceBuilder

Returns the surface type
License requirements: None.

surfaceType() - Method in interface nxopen.motion.TirePropertyAdvancedParameters

Returns the surface type.

surfaceType() - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder

Returns the type of parting surface to be created.

surfaceTypeOption() - Method in interface nxopen.motion.BodyContactRecurdyn

Returns the surface type option
License requirements: None.

SurfaceUVDirectionBuilder - Interface in nxopen

Represents an edit surface u/v direction builder that allows reversing or swapping parametric directions.

surfaceVectorFace() - Method in interface nxopen.weld.EasyPatternBuilder

Returns the surface vector face.

SurfaceWeld - Interface in nxopen.weld

Represents a surface weld feature
To create or edit an instance of this class, use SurfaceWeldBuilder

Created in NX9.0.0

SurfaceWeldBuilder - Interface in nxopen.weld

Use to create or edit a SurfaceWeld feature.

SurfaceWeldBuilder.DestinationTypes - Class in nxopen.weld

The option specifying where the surface weld feature should be created.

SURFACING - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSymbolType

SURFACING - Static variable in class nxopen.annotations.Symbol

Specifies surfacing weld symbol (ISO and DIN only)

surfAnalData - Variable in class nxopen.uf.UFDisp.SrfanlData

surfAnalDisplay - Variable in class nxopen.uf.UFDisp.SrfanlData

surfAnalDisplayDistance - Variable in class nxopen.uf.UFDisp.SrfanlData

surfAnalDisplayMax - Variable in class nxopen.uf.UFDisp.SrfanlData

surfAnalDisplayMean - Variable in class nxopen.uf.UFDisp.SrfanlData

surfAnalDisplayMin - Variable in class nxopen.uf.UFDisp.SrfanlData

surfAnalDisplayNormal - Variable in class nxopen.uf.UFDisp.SrfanlData

surfAnalDisplayRefl - Variable in class nxopen.uf.UFDisp.SrfanlData

surfAnalDisplaySec - Variable in class nxopen.uf.UFDisp.SrfanlData

surfAnalDisplaySlope - Variable in class nxopen.uf.UFDisp.SrfanlData

surfAnalDisplayU - Variable in class nxopen.uf.UFDisp.SrfanlData

surfAnalDisplayV - Variable in class nxopen.uf.UFDisp.SrfanlData

surfAnalFineness - Variable in class nxopen.uf.UFDisp.SrfanlData

surfCtrlType - Variable in class nxopen.uf.UFModl.RoughOffset

surfMeshSizeVariation - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms

surfMeshSizeVariation - Variable in class nxopen.uf.UFSf.UgsTetMeshParms

surfMethod - Variable in class nxopen.uf.UFModl.RoughOffset

surfReg() - Method in interface nxopen.UFSession

surfTrimTol() - Method in interface nxopen.IgesImporter

Returns the surf trim tol - surface trimming tolerance
License requirements: None.

surroundingDataProximityDistance() - Method in interface nxopen.assemblies.MechanicalRoutingSubsetBuilder

Returns a proximity to Routing Content method has been selected to determine the surrounding content then this is the distance value used to perform the evaluation.

surroundingDataRecipeMethodType() - Method in interface nxopen.assemblies.MechanicalRoutingSubsetBuilder

Returns the routing recipes Assemblies.MechanicalRoutingSubsetBuilder
License requirements: None.

surroundingPatchSurfaceFilename() - Method in interface nxopen.features.FeatureBuilder

Returns the surrounding patch surface filename
License requirements: None.

SUSPECT - Static variable in class nxopen.cam.FeatureGeometryGroup.ProcessStatus

Feature group status is suspected

SUSPECT_BOUNDING_BOX_COLOR - Static variable in class nxopen.uf.UFCamPref.CamPref

suspectBoundingBoxColor() - Method in interface nxopen.cam.Preferences

Returns the suspect bounding box color
License requirements: None.

suspendCreateToolbar() - Method in interface nxopen.uf.UFUi

Refer to UF_UI_suspend_create_toolbar for documentation.

suspendInitAppstate() - Method in interface nxopen.uf.UFUi

Refer to UF_UI_suspend_init_appstate for documentation.

suspendRemoveToolbar() - Method in interface nxopen.uf.UFUi

Refer to UF_UI_suspend_remove_toolbar for documentation.

SUSPENSION_TEMPLATE - Static variable in class nxopen.features.vehicledesign.TireEnvelopeBuilder.MotionMethod

From a defined suspension template.

suspensionTemplate() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

Returns the option to specify which suspension template will be used.

suspensionTemplateFileName() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

Returns the name of the file containing points defining a suspension template.

SUSSMANBATHE - Static variable in class nxopen.PhysicalMaterial.Type

Sussman-Bathe hyperelastic material

SV_KIM_DEGOF_DIRECTION_NONE - Static variable in class nxopen.uf.UFSim.SvKimDegofDirection

SV_KIM_DEGOF_DIRECTION_XNEGATIVE - Static variable in class nxopen.uf.UFSim.SvKimDegofDirection

SV_KIM_DEGOF_DIRECTION_XPOSITIVE - Static variable in class nxopen.uf.UFSim.SvKimDegofDirection

SV_KIM_DEGOF_DIRECTION_YNEGATIVE - Static variable in class nxopen.uf.UFSim.SvKimDegofDirection

SV_KIM_DEGOF_DIRECTION_YPOSITIVE - Static variable in class nxopen.uf.UFSim.SvKimDegofDirection

SV_KIM_DEGOF_DIRECTION_ZNEGATIVE - Static variable in class nxopen.uf.UFSim.SvKimDegofDirection

SV_KIM_DEGOF_DIRECTION_ZPOSITIVE - Static variable in class nxopen.uf.UFSim.SvKimDegofDirection

SvtBuilder - Interface in nxopen.drawings

Represents a SvtBuilder
Created in NX6.0.0

SW_PART_ASM_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId

swap(int, int) - Method in interface nxopen.annotations.ArbitraryAreaSeedBuilderList

Exchanges the position of two objects inside the list.

swap(ArbitraryAreaSeedBuilder, ArbitraryAreaSeedBuilder) - Method in interface nxopen.annotations.ArbitraryAreaSeedBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.annotations.DatumReferenceBuilderList

Exchanges the position of two objects inside the list.

swap(DatumReferenceBuilder, DatumReferenceBuilder) - Method in interface nxopen.annotations.DatumReferenceBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilderList

Exchanges the position of two objects inside the list.

swap(FeatureControlFrameDataBuilder, FeatureControlFrameDataBuilder) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.annotations.LeaderDataList

Exchanges the position of two objects inside the list.

swap(LeaderData, LeaderData) - Method in interface nxopen.annotations.LeaderDataList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.annotations.MasterSymbolListItemBuilderList

Exchanges the position of two objects inside the list.

swap(MasterSymbolListItemBuilder, MasterSymbolListItemBuilder) - Method in interface nxopen.annotations.MasterSymbolListItemBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.annotations.SymbolCatalogParameterBuilderList

Exchanges the position of two objects inside the list.

swap(SymbolCatalogParameterBuilder, SymbolCatalogParameterBuilder) - Method in interface nxopen.annotations.SymbolCatalogParameterBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.annotations.TitleBlockCellBuilderList

Exchanges the position of two objects inside the list.

swap(TitleBlockCellBuilder, TitleBlockCellBuilder) - Method in interface nxopen.annotations.TitleBlockCellBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.assemblies.PartitionList

Exchanges the position of two objects inside the list.

swap(Partition, Partition) - Method in interface nxopen.assemblies.PartitionList

Exchanges the position of two objects inside the list.

swap(UIBlock, UIBlock) - Method in interface nxopen.blockstyler.SetList

Swaps the location of two items
License requirements: None.

swap(int, int) - Method in interface nxopen.BodyList

Exchanges the position of two objects inside the list.

swap(Body, Body) - Method in interface nxopen.BodyList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.cae.DependentMeshListItemBuilderList

Exchanges the position of two objects inside the list.

swap(DependentMeshListItemBuilder, DependentMeshListItemBuilder) - Method in interface nxopen.cae.DependentMeshListItemBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.cae.ManualSweepBetweenListItemSelectionList

Exchanges the position of two objects inside the list.

swap(ManualSweepBetweenListItemSelection, ManualSweepBetweenListItemSelection) - Method in interface nxopen.cae.ManualSweepBetweenListItemSelectionList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.cae.MeshManualSweepBetweenListItemSelectionList

Exchanges the position of two objects inside the list.

swap(MeshManualSweepBetweenListItemSelection, MeshManualSweepBetweenListItemSelection) - Method in interface nxopen.cae.MeshManualSweepBetweenListItemSelectionList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.cam.BoundaryMemberSetList

Exchanges the position of two objects inside the list.

swap(BoundaryMemberSet, BoundaryMemberSet) - Method in interface nxopen.cam.BoundaryMemberSetList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.cam.BoundarySetList

Exchanges the position of two objects inside the list.

swap(BoundarySet, BoundarySet) - Method in interface nxopen.cam.BoundarySetList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.cam.BoundaryTurnVariableStockSetList

Exchanges the position of two objects inside the list.

swap(BoundaryTurnVariableStockSet, BoundaryTurnVariableStockSet) - Method in interface nxopen.cam.BoundaryTurnVariableStockSetList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.cam.CAMFeatureList

Exchanges the position of two objects inside the list.

swap(CAMFeature, CAMFeature) - Method in interface nxopen.cam.CAMFeatureList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.cam.CollisionPairBuilderList

Exchanges the position of two objects inside the list.

swap(CollisionPairBuilder, CollisionPairBuilder) - Method in interface nxopen.cam.CollisionPairBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.cam.CustomLoopSetList

Exchanges the position of two objects inside the list.

swap(CustomLoopSet, CustomLoopSet) - Method in interface nxopen.cam.CustomLoopSetList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.cam.CutVolumeList

Exchanges the position of two objects inside the list.

swap(CutVolume, CutVolume) - Method in interface nxopen.cam.CutVolumeList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.cam.DriveChainItemBuilderList

Exchanges the position of two objects inside the list.

swap(DriveChainItemBuilder, DriveChainItemBuilder) - Method in interface nxopen.cam.DriveChainItemBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.cam.GeometrySetList

Exchanges the position of two objects inside the list.

swap(GeometrySet, GeometrySet) - Method in interface nxopen.cam.GeometrySetList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.cam.HoldingSystemBuilderList

Exchanges the position of two objects inside the list.

swap(HoldingSystemBuilder, HoldingSystemBuilder) - Method in interface nxopen.cam.HoldingSystemBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.cam.HoleBossSetList

Exchanges the position of two objects inside the list.

swap(HoleBossSet, HoleBossSet) - Method in interface nxopen.cam.HoleBossSetList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.cam.InPathEventDataBuilderList

Exchanges the position of two objects inside the list.

swap(InPathEventDataBuilder, InPathEventDataBuilder) - Method in interface nxopen.cam.InPathEventDataBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.cam.LaserControlPointList

Exchanges the position of two objects inside the list.

swap(LaserControlPoint, LaserControlPoint) - Method in interface nxopen.cam.LaserControlPointList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.cam.ManualFeatureBuilderList

Exchanges the position of two objects inside the list.

swap(ManualFeatureBuilder, ManualFeatureBuilder) - Method in interface nxopen.cam.ManualFeatureBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.cam.SplitterList

Exchanges the position of two objects inside the list.

swap(Splitter, Splitter) - Method in interface nxopen.cam.SplitterList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.cam.SurfaceDriveGeometrySetList

Exchanges the position of two objects inside the list.

swap(SurfaceDriveGeometrySet, SurfaceDriveGeometrySet) - Method in interface nxopen.cam.SurfaceDriveGeometrySetList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.cam.TabPointDataBuilderList

Exchanges the position of two objects inside the list.

swap(TabPointDataBuilder, TabPointDataBuilder) - Method in interface nxopen.cam.TabPointDataBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.cam.ThreadedBossSetList

Exchanges the position of two objects inside the list.

swap(ThreadedBossSet, ThreadedBossSet) - Method in interface nxopen.cam.ThreadedBossSetList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.cam.ThreadedHoleSetList

Exchanges the position of two objects inside the list.

swap(ThreadedHoleSet, ThreadedHoleSet) - Method in interface nxopen.cam.ThreadedHoleSetList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.cam.ToolPathSplitItemBuilderList

Exchanges the position of two objects inside the list.

swap(ToolPathSplitItemBuilder, ToolPathSplitItemBuilder) - Method in interface nxopen.cam.ToolPathSplitItemBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.cam.UdeList

Exchanges the position of two objects inside the list.

swap(Ude, Ude) - Method in interface nxopen.cam.UdeList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.cam.WedmCustomBoundaryDataBuilderList

Exchanges the position of two objects inside the list.

swap(WedmCustomBoundaryDataBuilder, WedmCustomBoundaryDataBuilder) - Method in interface nxopen.cam.WedmCustomBoundaryDataBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.cam.WireGuideList

Exchanges the position of two objects inside the list.

swap(WireGuide, WireGuide) - Method in interface nxopen.cam.WireGuideList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.DateItemBuilderList

Exchanges the position of two objects inside the list.

swap(DateItemBuilder, DateItemBuilder) - Method in interface nxopen.DateItemBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.die.DieAssistantFlangeProfileList

Exchanges the position of two objects inside the list.

swap(DieAssistantFlangeProfile, DieAssistantFlangeProfile) - Method in interface nxopen.die.DieAssistantFlangeProfileList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.die.DieAssistantTrimProfileList

Exchanges the position of two objects inside the list.

swap(DieAssistantTrimProfile, DieAssistantTrimProfile) - Method in interface nxopen.die.DieAssistantTrimProfileList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.die.DieBooleanBuilderList

Exchanges the position of two objects inside the list.

swap(DieBooleanBuilder, DieBooleanBuilder) - Method in interface nxopen.die.DieBooleanBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.die.DieLimitsBuilderList

Exchanges the position of two objects inside the list.

swap(DieLimitsBuilder, DieLimitsBuilder) - Method in interface nxopen.die.DieLimitsBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.die.DieLocationBuilderList

Exchanges the position of two objects inside the list.

swap(DieLocationBuilder, DieLocationBuilder) - Method in interface nxopen.die.DieLocationBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.die.DrawBeadSegmentBuilderList

Exchanges the position of two objects inside the list.

swap(DrawBeadSegmentBuilder, DrawBeadSegmentBuilder) - Method in interface nxopen.die.DrawBeadSegmentBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.die.PierceItemBuilderList

Exchanges the position of two objects inside the list.

swap(PierceItemBuilder, PierceItemBuilder) - Method in interface nxopen.die.PierceItemBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.display.PointCloudClippingBoxesListItemBuilderList

Exchanges the position of two objects inside the list.

swap(PointCloudClippingBoxesListItemBuilder, PointCloudClippingBoxesListItemBuilder) - Method in interface nxopen.display.PointCloudClippingBoxesListItemBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.drafting.AttributeItemBuilderList

Exchanges the position of two objects inside the list.

swap(AttributeItemBuilder, AttributeItemBuilder) - Method in interface nxopen.drafting.AttributeItemBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.drafting.PrimaryContentItemBuilderList

Exchanges the position of two objects inside the list.

swap(PrimaryContentItemBuilder, PrimaryContentItemBuilder) - Method in interface nxopen.drafting.PrimaryContentItemBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.drawings.SectionLineSegmentBuilderList

Exchanges the position of two objects inside the list.

swap(SectionLineSegmentBuilder, SectionLineSegmentBuilder) - Method in interface nxopen.drawings.SectionLineSegmentBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilderList

Exchanges the position of two objects inside the list.

swap(ShipDraftingViewLinesBuilder, ShipDraftingViewLinesBuilder) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.drawings.ViewStyleShipbuildingLinesBuilderList

Exchanges the position of two objects inside the list.

swap(ViewStyleShipbuildingLinesBuilder, ViewStyleShipbuildingLinesBuilder) - Method in interface nxopen.drawings.ViewStyleShipbuildingLinesBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.ExpressionCollectorSetList

Exchanges the position of two objects inside the list.

swap(ExpressionCollectorSet, ExpressionCollectorSet) - Method in interface nxopen.ExpressionCollectorSetList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.ExpressionSectionSetList

Exchanges the position of two objects inside the list.

swap(ExpressionSectionSet, ExpressionSectionSet) - Method in interface nxopen.ExpressionSectionSetList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.features.FeatureList

Exchanges the position of two objects inside the list.

swap(Feature, Feature) - Method in interface nxopen.features.FeatureList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.features.GlobalShapingCurveOffsetBuilderList

Exchanges the position of two objects inside the list.

swap(GlobalShapingCurveOffsetBuilder, GlobalShapingCurveOffsetBuilder) - Method in interface nxopen.features.GlobalShapingCurveOffsetBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.features.GlobalShapingPointOffsetBuilderList

Exchanges the position of two objects inside the list.

swap(GlobalShapingPointOffsetBuilder, GlobalShapingPointOffsetBuilder) - Method in interface nxopen.features.GlobalShapingPointOffsetBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.features.PartGeometryCopySelectBuilderList

Exchanges the position of two objects inside the list.

swap(PartGeometryCopySelectBuilder, PartGeometryCopySelectBuilder) - Method in interface nxopen.features.PartGeometryCopySelectBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.features.PointSetFacePercentageBuilderList

Exchanges the position of two objects inside the list.

swap(PointSetFacePercentageBuilder, PointSetFacePercentageBuilder) - Method in interface nxopen.features.PointSetFacePercentageBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.features.RegionListItemBuilderList

Exchanges the position of two objects inside the list.

swap(RegionListItemBuilder, RegionListItemBuilder) - Method in interface nxopen.features.RegionListItemBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.features.sheetmetal.JoggleInputListItemBuilderList

Exchanges the position of two objects inside the list.

swap(JoggleInputListItemBuilder, JoggleInputListItemBuilder) - Method in interface nxopen.features.sheetmetal.JoggleInputListItemBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.features.sheetmetal.SMBoundaryConditionBuilderList

Exchanges the position of two objects inside the list.

swap(SMBoundaryConditionBuilder, SMBoundaryConditionBuilder) - Method in interface nxopen.features.sheetmetal.SMBoundaryConditionBuilderList

Exchanges the position of two objects inside the list.

swap() - Method in interface nxopen.features.ShelfBuilder

Returns the swap
License requirements: None.

swap(int, int) - Method in interface nxopen.features.shipdesign.AnchorPointList

Exchanges the position of two objects inside the list.

swap(AnchorPoint, AnchorPoint) - Method in interface nxopen.features.shipdesign.AnchorPointList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.features.shipdesign.BulkHeadListItemBuilderList

Exchanges the position of two objects inside the list.

swap(BulkHeadListItemBuilder, BulkHeadListItemBuilder) - Method in interface nxopen.features.shipdesign.BulkHeadListItemBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.features.shipdesign.CornerCutListItemBuilderList

Exchanges the position of two objects inside the list.

swap(CornerCutListItemBuilder, CornerCutListItemBuilder) - Method in interface nxopen.features.shipdesign.CornerCutListItemBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.features.shipdesign.DeckListItemBuilderList

Exchanges the position of two objects inside the list.

swap(DeckListItemBuilder, DeckListItemBuilder) - Method in interface nxopen.features.shipdesign.DeckListItemBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.features.shipdesign.ItFrameListItemBuilderList

Exchanges the position of two objects inside the list.

swap(ItFrameListItemBuilder, ItFrameListItemBuilder) - Method in interface nxopen.features.shipdesign.ItFrameListItemBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.features.shipdesign.OrientationRegionItemBuilderList

Exchanges the position of two objects inside the list.

swap(OrientationRegionItemBuilder, OrientationRegionItemBuilder) - Method in interface nxopen.features.shipdesign.OrientationRegionItemBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.features.shipdesign.PlaneListBuilderList

Exchanges the position of two objects inside the list.

swap(PlaneListBuilder, PlaneListBuilder) - Method in interface nxopen.features.shipdesign.PlaneListBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.features.shipdesign.PlateBoundaryOptionBuilderList

Exchanges the position of two objects inside the list.

swap(PlateBoundaryOptionBuilder, PlateBoundaryOptionBuilder) - Method in interface nxopen.features.shipdesign.PlateBoundaryOptionBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.features.shipdesign.SeamBlockBuilderList

Exchanges the position of two objects inside the list.

swap(SeamBlockBuilder, SeamBlockBuilder) - Method in interface nxopen.features.shipdesign.SeamBlockBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.features.shipdesign.SectionViewBuilderList

Exchanges the position of two objects inside the list.

swap(SectionViewBuilder, SectionViewBuilder) - Method in interface nxopen.features.shipdesign.SectionViewBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.features.shipdesign.ShipNamesBuilderList

Exchanges the position of two objects inside the list.

swap(ShipNamesBuilder, ShipNamesBuilder) - Method in interface nxopen.features.shipdesign.ShipNamesBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.features.shipdesign.StandardPartItemBuilderList

Exchanges the position of two objects inside the list.

swap(StandardPartItemBuilder, StandardPartItemBuilder) - Method in interface nxopen.features.shipdesign.StandardPartItemBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.features.shipdesign.SteelInsulationBoundaryBuilderList

Exchanges the position of two objects inside the list.

swap(SteelInsulationBoundaryBuilder, SteelInsulationBoundaryBuilder) - Method in interface nxopen.features.shipdesign.SteelInsulationBoundaryBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.features.shipdesign.SubSystemBuilderList

Exchanges the position of two objects inside the list.

swap(SubSystemBuilder, SubSystemBuilder) - Method in interface nxopen.features.shipdesign.SubSystemBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.features.shipdesign.TransFrameListItemBuilderList

Exchanges the position of two objects inside the list.

swap(TransFrameListItemBuilder, TransFrameListItemBuilder) - Method in interface nxopen.features.shipdesign.TransFrameListItemBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.features.SmoothRangeBuilderList

Exchanges the position of two objects inside the list.

swap(SmoothRangeBuilder, SmoothRangeBuilder) - Method in interface nxopen.features.SmoothRangeBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.features.subdivision.CageSectionDataList

Exchanges the position of two objects inside the list.

swap(CageSectionData, CageSectionData) - Method in interface nxopen.features.subdivision.CageSectionDataList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.features.VariableRadiusPointsBuilderList

Exchanges the position of two objects inside the list.

swap(VariableRadiusPointsBuilder, VariableRadiusPointsBuilder) - Method in interface nxopen.features.VariableRadiusPointsBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.features.vehicledesign.CloseRangeCameraListItemBuilderList

Exchanges the position of two objects inside the list.

swap(CloseRangeCameraListItemBuilder, CloseRangeCameraListItemBuilder) - Method in interface nxopen.features.vehicledesign.CloseRangeCameraListItemBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.features.vehicledesign.CloseRangeDemoCylinderListItemBuilderList

Exchanges the position of two objects inside the list.

swap(CloseRangeDemoCylinderListItemBuilder, CloseRangeDemoCylinderListItemBuilder) - Method in interface nxopen.features.vehicledesign.CloseRangeDemoCylinderListItemBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.fields.PathObjectsList

Exchanges the position of two objects inside the list.

swap(PathObjects, PathObjects) - Method in interface nxopen.fields.PathObjectsList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.geometricutilities.BlendSetbackBuilderList

Exchanges the position of two objects inside the list.

swap(BlendSetbackBuilder, BlendSetbackBuilder) - Method in interface nxopen.geometricutilities.BlendSetbackBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.geometricutilities.BoundaryDefinitionBuilderList

Exchanges the position of two objects inside the list.

swap(BoundaryDefinitionBuilder, BoundaryDefinitionBuilder) - Method in interface nxopen.geometricutilities.BoundaryDefinitionBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.geometricutilities.BoundingObjectBuilderList

Exchanges the position of two objects inside the list.

swap(BoundingObjectBuilder, BoundingObjectBuilder) - Method in interface nxopen.geometricutilities.BoundingObjectBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.geometricutilities.EntityUsageInfoList

Exchanges the position of two objects inside the list.

swap(EntityUsageInfo, EntityUsageInfo) - Method in interface nxopen.geometricutilities.EntityUsageInfoList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.geometricutilities.FaceSetOffsetList

Exchanges the position of two objects inside the list.

swap(FaceSetOffset, FaceSetOffset) - Method in interface nxopen.geometricutilities.FaceSetOffsetList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.geometricutilities.FtmFixedCurvesBuilderList

Exchanges the position of two objects inside the list.

swap(FtmFixedCurvesBuilder, FtmFixedCurvesBuilder) - Method in interface nxopen.geometricutilities.FtmFixedCurvesBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.geometricutilities.FtmTransformCurvesBuilderList

Exchanges the position of two objects inside the list.

swap(FtmTransformCurvesBuilder, FtmTransformCurvesBuilder) - Method in interface nxopen.geometricutilities.FtmTransformCurvesBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.geometricutilities.FtmTransformPointsBuilderList

Exchanges the position of two objects inside the list.

swap(FtmTransformPointsBuilder, FtmTransformPointsBuilder) - Method in interface nxopen.geometricutilities.FtmTransformPointsBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.geometricutilities.InstanceEditedExpressionItemList

Exchanges the position of two objects inside the list.

swap(InstanceEditedExpressionItem, InstanceEditedExpressionItem) - Method in interface nxopen.geometricutilities.InstanceEditedExpressionItemList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.geometricutilities.ParentEquivalencyMapList

Exchanges the position of two objects inside the list.

swap(ParentEquivalencyMap, ParentEquivalencyMap) - Method in interface nxopen.geometricutilities.ParentEquivalencyMapList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.geometricutilities.PatternIncrementItemList

Exchanges the position of two objects inside the list.

swap(PatternIncrementItem, PatternIncrementItem) - Method in interface nxopen.geometricutilities.PatternIncrementItemList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.geometricutilities.PatternSpacingsListItemList

Exchanges the position of two objects inside the list.

swap(PatternSpacingsListItem, PatternSpacingsListItem) - Method in interface nxopen.geometricutilities.PatternSpacingsListItemList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusFaceGroupBuilderList

Exchanges the position of two objects inside the list.

swap(ReduceSurfaceRadiusFaceGroupBuilder, ReduceSurfaceRadiusFaceGroupBuilder) - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusFaceGroupBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.geometricutilities.RotationSetBuilderList

Exchanges the position of two objects inside the list.

swap(RotationSetBuilder, RotationSetBuilder) - Method in interface nxopen.geometricutilities.RotationSetBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.geometricutilities.ScalingSetBuilderList

Exchanges the position of two objects inside the list.

swap(ScalingSetBuilder, ScalingSetBuilder) - Method in interface nxopen.geometricutilities.ScalingSetBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.geometricutilities.SelectionListList

Exchanges the position of two objects inside the list.

swap(SelectionList, SelectionList) - Method in interface nxopen.geometricutilities.SelectionListList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.geometricutilities.SpinePlaneBuilderList

Exchanges the position of two objects inside the list.

swap(SpinePlaneBuilder, SpinePlaneBuilder) - Method in interface nxopen.geometricutilities.SpinePlaneBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.geometricutilities.StyledSweepDoubleOnPathDimBuilderList

Exchanges the position of two objects inside the list.

swap(StyledSweepDoubleOnPathDimBuilder, StyledSweepDoubleOnPathDimBuilder) - Method in interface nxopen.geometricutilities.StyledSweepDoubleOnPathDimBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.geometricutilities.TransitionCurveBuilderList

Exchanges the position of two objects inside the list.

swap(TransitionCurveBuilder, TransitionCurveBuilder) - Method in interface nxopen.geometricutilities.TransitionCurveBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.geometricutilities.TransitionLawNodeBuilderList

Exchanges the position of two objects inside the list.

swap(TransitionLawNodeBuilder, TransitionLawNodeBuilder) - Method in interface nxopen.geometricutilities.TransitionLawNodeBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.geometricutilities.TwoExpressionsCollectorSetList

Exchanges the position of two objects inside the list.

swap(TwoExpressionsCollectorSet, TwoExpressionsCollectorSet) - Method in interface nxopen.geometricutilities.TwoExpressionsCollectorSetList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.geometricutilities.TwoExpressionsSectionSetList

Exchanges the position of two objects inside the list.

swap(TwoExpressionsSectionSet, TwoExpressionsSectionSet) - Method in interface nxopen.geometricutilities.TwoExpressionsSectionSetList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.ListCreatorList

Exchanges the position of two objects inside the list.

swap(ListCreator, ListCreator) - Method in interface nxopen.ListCreatorList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.mechanicalrouting.PathTransitionBuilderList

Exchanges the position of two objects inside the list.

swap(PathTransitionBuilder, PathTransitionBuilder) - Method in interface nxopen.mechanicalrouting.PathTransitionBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilderList

Exchanges the position of two objects inside the list.

swap(ExternalConnectionElementBuilder, ExternalConnectionElementBuilder) - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.mechatronics.GanttOperationConditionBuilderList

Exchanges the position of two objects inside the list.

swap(GanttOperationConditionBuilder, GanttOperationConditionBuilder) - Method in interface nxopen.mechatronics.GanttOperationConditionBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.mechatronics.GanttOperationParameterBuilderList

Exchanges the position of two objects inside the list.

swap(GanttOperationParameterBuilder, GanttOperationParameterBuilder) - Method in interface nxopen.mechatronics.GanttOperationParameterBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.mechatronics.MATLABSignalConnectionBuilderList

Exchanges the position of two objects inside the list.

swap(MATLABSignalConnectionBuilder, MATLABSignalConnectionBuilder) - Method in interface nxopen.mechatronics.MATLABSignalConnectionBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.mechatronics.PathConstraintFrameBuilderList

Exchanges the position of two objects inside the list.

swap(PathConstraintFrameBuilder, PathConstraintFrameBuilder) - Method in interface nxopen.mechatronics.PathConstraintFrameBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.mechatronics.ProxyObjectParameterBuilderList

Exchanges the position of two objects inside the list.

swap(ProxyObjectParameterBuilder, ProxyObjectParameterBuilder) - Method in interface nxopen.mechatronics.ProxyObjectParameterBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.mechatronics.RuntimeFormulaParameterBuilderList

Exchanges the position of two objects inside the list.

swap(RuntimeFormulaParameterBuilder, RuntimeFormulaParameterBuilder) - Method in interface nxopen.mechatronics.RuntimeFormulaParameterBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.mechatronics.SensorsActuatorsListBuilderList

Exchanges the position of two objects inside the list.

swap(SensorsActuatorsListBuilder, SensorsActuatorsListBuilder) - Method in interface nxopen.mechatronics.SensorsActuatorsListBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilderList

Exchanges the position of two objects inside the list.

swap(SHMSignalConnectionBuilder, SHMSignalConnectionBuilder) - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.mechatronics.SignalConnectionBuilderList

Exchanges the position of two objects inside the list.

swap(SignalConnectionBuilder, SignalConnectionBuilder) - Method in interface nxopen.mechatronics.SignalConnectionBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.motion.ConfigurationParameterList

Exchanges the position of two objects inside the list.

swap(ConfigurationParameter, ConfigurationParameter) - Method in interface nxopen.motion.ConfigurationParameterList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.motion.ControlInputPortBuilderList

Exchanges the position of two objects inside the list.

swap(ControlInputPortBuilder, ControlInputPortBuilder) - Method in interface nxopen.motion.ControlInputPortBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.motion.InputPortAssociationList

Exchanges the position of two objects inside the list.

swap(InputPortAssociation, InputPortAssociation) - Method in interface nxopen.motion.InputPortAssociationList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.motion.OutputPortAssociationList

Exchanges the position of two objects inside the list.

swap(OutputPortAssociation, OutputPortAssociation) - Method in interface nxopen.motion.OutputPortAssociationList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.motion.PortVariableList

Exchanges the position of two objects inside the list.

swap(PortVariable, PortVariable) - Method in interface nxopen.motion.PortVariableList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.motion.SegmentBuilderList

Exchanges the position of two objects inside the list.

swap(SegmentBuilder, SegmentBuilder) - Method in interface nxopen.motion.SegmentBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.motion.SignalChartListItemList

Exchanges the position of two objects inside the list.

swap(SignalChartListItem, SignalChartListItem) - Method in interface nxopen.motion.SignalChartListItemList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.NXObjectList

Exchanges the position of two objects inside the list.

swap(NXObject, NXObject) - Method in interface nxopen.NXObjectList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.ObjectList

Exchanges the position of two objects inside the list.

swap(TaggedObject, TaggedObject) - Method in interface nxopen.ObjectList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.PlaneList

Exchanges the position of two objects inside the list.

swap(Plane, Plane) - Method in interface nxopen.PlaneList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.PointList

Exchanges the position of two objects inside the list.

swap(Point, Point) - Method in interface nxopen.PointList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.RegionPointList

Exchanges the position of two objects inside the list.

swap(RegionPoint, RegionPoint) - Method in interface nxopen.RegionPointList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.routing.RunItemsBuilderList

Exchanges the position of two objects inside the list.

swap(RunItemsBuilder, RunItemsBuilder) - Method in interface nxopen.routing.RunItemsBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.ScCollectorList

Exchanges the position of two objects inside the list.

swap(ScCollector, ScCollector) - Method in interface nxopen.ScCollectorList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.SectionList

Exchanges the position of two objects inside the list.

swap(Section, Section) - Method in interface nxopen.SectionList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.sim.KinematicChainList

Exchanges the position of two objects inside the list.

swap(KinematicChain, KinematicChain) - Method in interface nxopen.sim.KinematicChainList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.sim.KinematicChannelBuilderList

Exchanges the position of two objects inside the list.

swap(KinematicChannelBuilder, KinematicChannelBuilder) - Method in interface nxopen.sim.KinematicChannelBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.sim.KinematicJunctionBuilderList

Exchanges the position of two objects inside the list.

swap(KinematicJunctionBuilder, KinematicJunctionBuilder) - Method in interface nxopen.sim.KinematicJunctionBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.TaggedObjectList

Exchanges the position of two objects inside the list.

swap(TaggedObject, TaggedObject) - Method in interface nxopen.TaggedObjectList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.tooling.SelectReuseLibraryListItemBuilderList

Exchanges the position of two objects inside the list.

swap(SelectReuseLibraryListItemBuilder, SelectReuseLibraryListItemBuilder) - Method in interface nxopen.tooling.SelectReuseLibraryListItemBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.tooling.ShimInnerProfileSetBuilderList

Exchanges the position of two objects inside the list.

swap(ShimInnerProfileSetBuilder, ShimInnerProfileSetBuilder) - Method in interface nxopen.tooling.ShimInnerProfileSetBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.weld.JointItemBuilderList

Exchanges the position of two objects inside the list.

swap(JointItemBuilder, JointItemBuilder) - Method in interface nxopen.weld.JointItemBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.weld.JointmarkFaceSetsBuilderList

Exchanges the position of two objects inside the list.

swap(JointmarkFaceSetsBuilder, JointmarkFaceSetsBuilder) - Method in interface nxopen.weld.JointmarkFaceSetsBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.weld.JointmarkGuideBuilderList

Exchanges the position of two objects inside the list.

swap(JointmarkGuideBuilder, JointmarkGuideBuilder) - Method in interface nxopen.weld.JointmarkGuideBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.weld.JointmarkPointsBuilderList

Exchanges the position of two objects inside the list.

swap(JointmarkPointsBuilder, JointmarkPointsBuilder) - Method in interface nxopen.weld.JointmarkPointsBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.weld.WeldBeadPathBuilderList

Exchanges the position of two objects inside the list.

swap(WeldBeadPathBuilder, WeldBeadPathBuilder) - Method in interface nxopen.weld.WeldBeadPathBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.weld.WeldBeadSizeBuilderList

Exchanges the position of two objects inside the list.

swap(WeldBeadSizeBuilder, WeldBeadSizeBuilder) - Method in interface nxopen.weld.WeldBeadSizeBuilderList

Exchanges the position of two objects inside the list.

swap(int, int) - Method in interface nxopen.weld.WeldFillStripBuilderList

Exchanges the position of two objects inside the list.

swap(WeldFillStripBuilder, WeldFillStripBuilder) - Method in interface nxopen.weld.WeldFillStripBuilderList

Exchanges the position of two objects inside the list.

SWAP_ENDS - Static variable in class nxopen.cae.ElementConnectivityBuilder.Methods

Swap the nodes of a 2-noded element

swapAnchorEnd() - Method in interface nxopen.formboard.ShapeSegmentBuilder

License requirements: routing_harness ("Routing Harness")
.

swapAnchorSegment() - Method in interface nxopen.routing.EditBendAngleBuilder

Swap the free and anchor segments.

swapProfile() - Method in interface nxopen.routing.OverstockBuilder

Returns the profile swap flag.

swapProfile() - Method in interface nxopen.routing.StockBuilder

Returns the profile swap flag.

swapSegment(SegmentBuilder, SegmentBuilder) - Method in interface nxopen.motion.RoadBuilder

Swap two segments
License requirements: mechanisms ("MECHANISMS")
.

swapUandV() - Method in interface nxopen.SurfaceUVDirectionBuilder

Returns the swap u and v directions option.

SWARF_BASE_UV - Static variable in class nxopen.cam.ToolAxisVariable.Types

Align to U or V parameter line

SWARF_CUT_WALL - Static variable in class nxopen.features.AnalyzePocketBuilder.AngledWallSolutions

One pass End Mill.

SWARF_CUT_WALL - Static variable in class nxopen.features.BlendPocketBuilder.AngledWallSolutions

One pass End Mill.

SWARF_CUT_WALL_AND_FLOOR - Static variable in class nxopen.features.AnalyzePocketBuilder.AngledWallSolutions

Two pass End Mill.

SWARF_CUT_WALL_AND_FLOOR - Static variable in class nxopen.features.BlendPocketBuilder.AngledWallSolutions

Two pass End Mill.

SWARF_DRIVE - Static variable in class nxopen.cam.ToolAxisVariable.Types

Swarf Drive

swarfGougeCheck() - Method in interface nxopen.cam.ToolAxisAdvanced

Returns the swarf gouge check
License requirements: None.

swarfTiltAngle() - Method in interface nxopen.cam.ToolAxisVariable

Returns the Swarf Tilt Angle
License requirements: None.

sweep() - Method in interface nxopen.cam.InspectionMethodBuilder

Returns the sweep of the Scan Helix
License requirements: None.

SWEEP - Static variable in class nxopen.cam.InspectionMethodBuilder.UVModeTypes

Start angle and sweep angle

sweep() - Method in interface nxopen.cam.InspectionScanHelixBuilder

Returns the sweep of the Scan Helix
License requirements: None.

sweep - Variable in class nxopen.cam.UdtSectionBuilder.Data

the sweep

SWEEP_ANGLE - Static variable in class nxopen.cam.InspectionMethodBuilder.ScanHelixTurnTypes

Sweep Angle

SWEEP_INQUIRE_ERROR - Static variable in class nxopen.uf.UFConstants

SWEEP_SOLID - Static variable in class nxopen.cae.ElementTypeBuilder.ElementType

Sweep mesh solid

SWEEP_SOLID_WEDGE - Static variable in class nxopen.cae.ElementTypeBuilder.ElementType

Sweep mesh solid with wedges

SWEEP_SURFACE - Static variable in class nxopen.positioning.ConstraintReference.GeometryType

Swept surface

SWEEP_TRIM_BETW_TWO_FACES - Static variable in class nxopen.uf.UFModl.SweepTrimSigns

SWEEP_TRIM_NONE - Static variable in class nxopen.uf.UFModl.SweepTrimSigns

SWEEP_TRIM_TO_ALL - Static variable in class nxopen.uf.UFModl.SweepTrimSigns

SWEEP_TRIM_TO_FACE - Static variable in class nxopen.uf.UFModl.SweepTrimSigns

SweepAlongGuide - Interface in nxopen.features

Represents a sweep along guide feature
To create or edit an instance of this class, use SweepAlongGuideBuilder

Created in NX6.0.0

SweepAlongGuideBuilder - Interface in nxopen.features

Represents a SweepAlongGuide builder
To create a new instance of this class, use FeatureCollection.createSweepAlongGuideBuilder(nxopen.features.SweepAlongGuide)
Default values.

sweepAngle() - Method in interface nxopen.cam.CircularAboutAxisMoveBuilder

Returns the sweep angle
License requirements: None.

sweepAngle() - Method in interface nxopen.features.sheetmetal.HemFlangeBuilder

Returns the sweep
License requirements: nx_sheet_metal ("NX Sheet Metal")
.

SweepBetweenMeshBuilder - Interface in nxopen.cae

Deprecated.

Deprecated in NX10.0.0. Use CAE.Mesh3dHexBuilder .

SweepBetweenMeshBuilder.Types - Class in nxopen.cae

Deprecated.

creation type

sweepFeatureCollection() - Method in interface nxopen.features.FeatureCollection

Returns the Sweep-like features collection belonging to this part .

SweepFeatureCollection - Interface in nxopen.features

Manages sweep-like features.

sweepOrientation() - Method in interface nxopen.features.SweptVolumeBuilder

Returns the sweep orientation
License requirements: None.

sweepSide() - Method in interface nxopen.features.sheetmetal.ContourFlangeBuilder

Returns the projection direction of contour flange
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

SweepTrimObject() - Constructor for class nxopen.uf.UFModl.SweepTrimObject

SweepTrimObject(Tag[], int, UFModl.SweepTrimSigns, Tag[], int) - Constructor for class nxopen.uf.UFModl.SweepTrimObject

sweepType() - Method in interface nxopen.features.sheetmetal.ContourFlangeBuilder

Returns the projection side of contour flange
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.

SWEPT - Static variable in class nxopen.Face.FaceType

Swept face

SWEPT - Static variable in class nxopen.features.EmbossSidewall.SidewallMethod

Indicates method to create sidewalls that are swept.

SWEPT - Static variable in class nxopen.features.FaceBlendBuilder.Type

Swept - Interface in nxopen.features

Represents a swept feature
To create or edit an instance of this class, use SweptBuilder

Created in NX5.0.0

SWEPT - Static variable in class nxopen.tooling.MWDesignPartingSurfaceBuilder.PartingSurfaceType

Swept

SWEPT - Static variable in class nxopen.tooling.MWDesignPartingSurfaceBuilder.TransitionSurfaceType

Swept transition surface

sweptbodies - Variable in class nxopen.motion.PostProcess.CreateEnvelopeData

The resulting swept bodies

SweptBuilder - Interface in nxopen.features

Represents a Swept builder
To create a new instance of this class, use FeatureCollection.createSweptBuilder(nxopen.features.Swept)
Default values.

SweptBuilder.InterpolationOptions - Class in nxopen.features

This enum represents the Interpolation option.

SweptBuilder.SectionLocationTypes - Class in nxopen.features

This enum represents the Section Location option.

SweptMesh - Interface in nxopen.cae

Represents swept Mesh
To create or edit an instance of this class, use Mesh3dHexBuilder

Created in NX6.0.0

SweptVolume - Interface in nxopen.features

Represents a swept volume feature
To create or edit an instance of this class, use SweptVolumeBuilder

Created in NX9.0.0

SweptVolumeBuilder - Interface in nxopen.features

Represents a SweptVolume builder
To create a new instance of this class, use SweepFeatureCollection.createSweptVolumeBuilder(nxopen.features.SweptVolume)
Default values.

SweptVolumeBuilder.SweepOrient - Class in nxopen.features

These represent the type of Sweep Orientation feature to be created

swingAngle() - Method in interface nxopen.cam.NcmEngRetBuilder

Returns the engage/retract swing angle
License requirements: None.

swingAngle() - Method in interface nxopen.cam.NcmLaserEngage

Returns the Swing Angle
License requirements: None.

swingAngle() - Method in interface nxopen.cam.NcmLaserRetract

Returns the Swing Angle
License requirements: None.

swingAngle() - Method in interface nxopen.cam.NcmPlanarEngRetBuilder

Returns the engage/retract swing angle
License requirements: None.

swingAngle() - Method in interface nxopen.cam.NcmScEngRetBuilder

Returns the engage/retract swing angle
License requirements: None.

SWITCH_ALL - Static variable in class nxopen.uf.UFSf.NodeSwitch

SWITCH_IN_INTERIOR - Static variable in class nxopen.uf.UFSf.NodeSwitch

SWITCH_ON_BOUNDARY - Static variable in class nxopen.uf.UFSf.NodeSwitch

SWITCH_REASON - Static variable in class nxopen.uistyler.StylerEvent.Reason

Switch reason

switchDrivers() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder

Switch the order of the two drivers.

switchHandler(StylerEvent) - Method in interface nxopen.uistyler.TabControl.SwitchHandler

Called when a user switches tabs.

switchHoleFillType() - Method in interface nxopen.facet.FillHoleBuilder

Switches boundary edge mapping based on the filling type (holes, island, bridge) When filling holes or islands, each hole is defined by a polyline.

switchLabelLocationX() - Method in interface nxopen.display.PlanarShipGridBuilder

Switch label location in X direction.

switchLabelLocationY() - Method in interface nxopen.display.PlanarShipGridBuilder

Switch label location in Y direction.

switchLabelLocationZ() - Method in interface nxopen.display.PlanarShipGridBuilder

Switch label location in Z direction.

switchLayerLayout(CAMObject) - Method in interface nxopen.cam.CAMSetup

Switch Layer and Layout
License requirements: cam_base ("CAM BASE")
.

switchMaterialSide1 - Variable in class nxopen.uf.UFMotion.Motion2DContact

switchMaterialSide2 - Variable in class nxopen.uf.UFMotion.Motion2DContact

switchParentFlag - Variable in class nxopen.uf.UFModl.SmcornerData

switchRegion() - Method in interface nxopen.facet.SnipFacetBodyBuilder

Switch the region to be snipped indicated by the region point.

switchScenarios(String, String) - Method in interface nxopen.uf.UFSf

Refer to UF_SF_switch_scenarios for documentation.

switchSide() - Method in interface nxopen.features.shipdesign.StiffenerBySupportPathBuilder

Returns the switch side flag, which can change the stiffener by support orienation when the StiffenerBySupportPathBuilder.Method is nxopen.features.ShipDesign.StiffenerBySupportPathBuilder.Method#ALIGNED_LENGTH .

switchSide() - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder

Returns the indication whether the side of the ship structure should be switched.

switchSide() - Method in interface nxopen.features.subdivision.StartSymmetricModelingBuilder

Returns the flag indicating if the mirror side should be switched
License requirements: None.

switchStartEnd() - Method in interface nxopen.routing.OverstockBuilder

Returns the path direction that defines the start of overstock assignment.

switchToPartinglineLayer() - Method in interface nxopen.tooling.TraverseLoopBuilder

Make parting layer as the work layer.

switchTrimSide() - Method in interface nxopen.die.MachineReliefBuilder

Returns the indicator if the trim side should be switched from the default for the sheet metal.

switchTrimSide() - Method in interface nxopen.tooling.DieEngTrimTaskBuilder

Switch trim side.

switchView(UFUiOnt.TreeMode) - Method in interface nxopen.uf.UFUiOnt

Refer to UF_UI_ONT_switch_view for documentation.

switchXYAxis() - Method in interface nxopen.cae.xyplot.GeneralDisplayStyles2D

Switches the X/Y axis
License requirements: nx_ftk ("NX Advanced Graphing")
.

SX_ASSY_XHATCH_OFF - Static variable in class nxopen.uf.UFDraw.SxAssyXhatch

SX_ASSY_XHATCH_ON - Static variable in class nxopen.uf.UFDraw.SxAssyXhatch

SX_BACKGROUND_OFF - Static variable in class nxopen.uf.UFDraw.SxBackground

SX_BACKGROUND_ON - Static variable in class nxopen.uf.UFDraw.SxBackground

SX_CROSSHATCH_OFF - Static variable in class nxopen.uf.UFDraw.SxCrosshatch

SX_CROSSHATCH_ON - Static variable in class nxopen.uf.UFDraw.SxCrosshatch

SX_SECTION_SHEET_BODY_OFF - Static variable in class nxopen.uf.UFDraw.SxSectionSheetBody

SX_SECTION_SHEET_BODY_ON - Static variable in class nxopen.uf.UFDraw.SxSectionSheetBody

sxAssyXhatch - Variable in class nxopen.uf.UFDraw.SxviewPrfs

sxBackground - Variable in class nxopen.uf.UFDraw.SxviewPrfs

sxCrosshatch - Variable in class nxopen.uf.UFDraw.SxviewPrfs

sxedgeTags - Variable in class nxopen.uf.UFDraw.AskSxedgesOfSxsolidData

SXLINE_LEG1 - Static variable in class nxopen.uf.UFDraw.SxlineLeg

SXLINE_LEG2 - Static variable in class nxopen.uf.UFDraw.SxlineLeg

SXLINE_ROTPT_LOST_ASSOC - Static variable in class nxopen.uf.UFDraw.SxlineStatus

SXLINE_ROTPT_OR_SXSEG_LOST_ASSOC - Static variable in class nxopen.uf.UFDraw.SxlineStatus

SXLINE_SXSEG_LOST_ASSOC - Static variable in class nxopen.uf.UFDraw.SxlineStatus

sxlineDisplay - Variable in class nxopen.uf.UFDraw.AskSxlineDefaultPrfsData

sxlineDisplay - Variable in class nxopen.uf.UFDraw.AskSxlineDisplayData

sxlineStatus - Variable in class nxopen.uf.UFDraw.AskFoldedSxlineData

sxlineStatus - Variable in class nxopen.uf.UFDraw.AskHalfSxlineData

sxlineStatus - Variable in class nxopen.uf.UFDraw.AskPictorialSxlineData

sxlineStatus - Variable in class nxopen.uf.UFDraw.AskRevolvedSxlineData

sxlineStatus - Variable in class nxopen.uf.UFDraw.AskSimpleSxlineData

sxlineStatus - Variable in class nxopen.uf.UFDraw.AskSteppedSxlineData

sxlineStatus - Variable in class nxopen.uf.UFDraw.AskUnfoldedSxlineData

SxlineSxsegs() - Constructor for class nxopen.uf.UFDraw.SxlineSxsegs

SxlineSxsegs(UFDraw.SxsegType, UFDrf.Object, double) - Constructor for class nxopen.uf.UFDraw.SxlineSxsegs

sxlineType - Variable in class nxopen.uf.UFDraw.AskPictorialSxlineData

sxSectionSheetBody - Variable in class nxopen.uf.UFDraw.SxviewPrfs

SXSEG_ARROW - Static variable in class nxopen.uf.UFDraw.SxsegType

SXSEG_BEND - Static variable in class nxopen.uf.UFDraw.SxsegType

SXSEG_CUT - Static variable in class nxopen.uf.UFDraw.SxsegType

sxsegAngle - Variable in class nxopen.uf.UFDraw.SxlineSxsegs

sxsegAngle - Variable in class nxopen.uf.UFDraw.SxsegInfo

sxsegInfo - Variable in class nxopen.uf.UFDraw.AskSxlineSxsegData

SxsegInfo() - Constructor for class nxopen.uf.UFDraw.SxsegInfo

SxsegInfo(UFDraw.SxsegType, UFDraw.SxlineLeg, UFDraw.SxsegMode, UFDraw.SxsegHighlight, double) - Constructor for class nxopen.uf.UFDraw.SxsegInfo

sxsegMode - Variable in class nxopen.uf.UFDraw.SxsegInfo

sxsegObject - Variable in class nxopen.uf.UFDraw.SxlineSxsegs

sxsegTags - Variable in class nxopen.uf.UFDraw.AskFoldedSxlineData

sxsegTags - Variable in class nxopen.uf.UFDraw.AskHalfSxlineData

sxsegTags - Variable in class nxopen.uf.UFDraw.AskPictorialSxlineData

sxsegTags - Variable in class nxopen.uf.UFDraw.AskRevolvedSxlineData

sxsegTags - Variable in class nxopen.uf.UFDraw.AskSimpleSxlineData

sxsegTags - Variable in class nxopen.uf.UFDraw.AskSteppedSxlineData

sxsegTags - Variable in class nxopen.uf.UFDraw.AskUnfoldedSxlineData

sxsegType - Variable in class nxopen.uf.UFDraw.SxlineSxsegs

sxsegType - Variable in class nxopen.uf.UFDraw.SxsegInfo

sxsolidTags - Variable in class nxopen.uf.UFDraw.AskSxsolidsOfSxviewData

SxviewPrfs() - Constructor for class nxopen.uf.UFDraw.SxviewPrfs

SxviewPrfs(UFDraw.SxSectionSheetBody, UFDraw.SxBackground, UFDraw.SxCrosshatch, UFDraw.SxAssyXhatch, double) - Constructor for class nxopen.uf.UFDraw.SxviewPrfs

sxviewTags - Variable in class nxopen.uf.UFDraw.AskFoldedSxlineData

sxviewTags - Variable in class nxopen.uf.UFDraw.AskHalfSxlineData

sxviewTags - Variable in class nxopen.uf.UFDraw.AskPictorialSxlineData

sxviewTags - Variable in class nxopen.uf.UFDraw.AskRevolvedSxlineData

sxviewTags - Variable in class nxopen.uf.UFDraw.AskSimpleSxlineData

sxviewTags - Variable in class nxopen.uf.UFDraw.AskSteppedSxlineData

sxviewTags - Variable in class nxopen.uf.UFDraw.AskUnfoldedSxlineData

SY - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent

SYM_CIRCLE - Static variable in class nxopen.uf.UFDrf.IdSymbolType

SYM_DATUM - Static variable in class nxopen.uf.UFDrf.IdSymbolType

SYM_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId

SYM_DIVCIR - Static variable in class nxopen.uf.UFDrf.IdSymbolType

SYM_DIVHEX - Static variable in class nxopen.uf.UFDrf.IdSymbolType

SYM_DIVSQR - Static variable in class nxopen.uf.UFDrf.IdSymbolType

SYM_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId

SYM_HEXAGON - Static variable in class nxopen.uf.UFDrf.IdSymbolType

SYM_MAXIMUM - Static variable in class nxopen.uf.UFDrf.IdSymbolType

SYM_ROUNDBOX - Static variable in class nxopen.uf.UFDrf.IdSymbolType

SYM_SQUARE - Static variable in class nxopen.uf.UFDrf.IdSymbolType

SYM_TRIDOWN - Static variable in class nxopen.uf.UFDrf.IdSymbolType

SYM_TRIUP - Static variable in class nxopen.uf.UFDrf.IdSymbolType

SYM_UNDERLINE - Static variable in class nxopen.uf.UFDrf.IdSymbolType

SYMBOL - Static variable in class nxopen.annotations.ChamferForm

C5

SYMBOL - Static variable in class nxopen.annotations.ImportAutocadBlockBuilder.EntityType

Custom Symbol

symbol() - Method in interface nxopen.annotations.LineWeldSideData

Returns the elementary weld symbol
License requirements: None.

symbol() - Method in interface nxopen.annotations.PartsListBuilder

Returns the symbol type specifies the balloon type used to call out members
License requirements: None.

symbol() - Method in interface nxopen.annotations.ReplaceSymbolBuilder

Returns the symbol
License requirements: None.

symbol() - Method in interface nxopen.annotations.SmashCustomSymbolBuilder

Returns the selected symbol instance
License requirements: None.

Symbol - Class in nxopen.annotations

Specifies the elementary weld symbol

SYMBOL - Static variable in class nxopen.cae.FEModelOccAttribute.AltRepDisplayStyle

Display alternate rep symbol when when in alt rep

SYMBOL - Static variable in class nxopen.drawings.DrawingRegionBuilder.RegionDraftingObjectType

SYMBOL - Static variable in class nxopen.features.TextBuilder.ScriptOptions

Specifies a character set of symbols

SYMBOL - Static variable in class nxopen.fields.DisplayPropertiesBuilder.DepDispTypeEnum

Symbol() - Constructor for class nxopen.mechatronics.SymbolTableBuilder.Symbol

Symbol(String, SymbolTableBuilder.IOType, SymbolTableBuilder.DataType, String, String) - Constructor for class nxopen.mechatronics.SymbolTableBuilder.Symbol

Constructor for the Symbol object.

SYMBOL_NAME_SIZE - Static variable in class nxopen.uf.UFConstants

SYMBOL_TYPE_ID_SYMBOL_CIRCLE - Static variable in class nxopen.uf.UFPlist.SymbolType

SYMBOL_TYPE_ID_SYMBOL_DIV_CIRCLE - Static variable in class nxopen.uf.UFPlist.SymbolType

SYMBOL_TYPE_ID_SYMBOL_DIV_HEXAGON - Static variable in class nxopen.uf.UFPlist.SymbolType

SYMBOL_TYPE_ID_SYMBOL_DIV_SQUARE - Static variable in class nxopen.uf.UFPlist.SymbolType

SYMBOL_TYPE_ID_SYMBOL_DOWN_TRIANGLE - Static variable in class nxopen.uf.UFPlist.SymbolType

SYMBOL_TYPE_ID_SYMBOL_HEXAGON - Static variable in class nxopen.uf.UFPlist.SymbolType

SYMBOL_TYPE_ID_SYMBOL_QUAD_CIRCLE - Static variable in class nxopen.uf.UFPlist.SymbolType

SYMBOL_TYPE_ID_SYMBOL_ROUNDED_BOX - Static variable in class nxopen.uf.UFPlist.SymbolType

SYMBOL_TYPE_ID_SYMBOL_SQUARE - Static variable in class nxopen.uf.UFPlist.SymbolType

SYMBOL_TYPE_ID_SYMBOL_UNDERLINE - Static variable in class nxopen.uf.UFPlist.SymbolType

SYMBOL_TYPE_ID_SYMBOL_UP_TRIANGLE - Static variable in class nxopen.uf.UFPlist.SymbolType

SYMBOL_TYPE_NONE - Static variable in class nxopen.uf.UFPlist.SymbolType

symbolAngle() - Method in interface nxopen.annotations.OrdinateDimensionPreferences

Returns the user defined symbol angle with baseline, if the symbol is not aligned with the baseline
License requirements: None.

symbolAngle() - Method in interface nxopen.annotations.OrdinateStyleBuilder

Returns the symbol angle in degress with respect to the baseline.

symbolAspectRatio - Variable in class nxopen.annotations.Lettering

Symbol aspect ratio (this only applies to symbols when using standard fonts) This value controls the aspect ratio of text control sequences such as the diameter symbol (represented by the <O> text control sequence), the counterbore symbol (represented by the <#C> text control sequence), the degree symbol (represented by the <$s> text control sequence), the true position symbol (represented by the <&10> text control sequence), etc.

symbolAspectRatio() - Method in interface nxopen.annotations.OrdinateDimensionPreferences

Returns the user defined symbol aspect ratio
License requirements: None.

symbolAspectRatio() - Method in interface nxopen.annotations.OrdinateStyleBuilder

Returns the symbol aspect ratio
License requirements: None.

symbolAspectRatio() - Method in interface nxopen.annotations.TextWithSymbolsBuilder

Returns the aspect ratio of the embedded user-defined symbols if the symbol size method is TextWithSymbolsBuilder.SymbolSizingMethod.SCALE_AND_ASPECT_RATIO
License requirements: None.

symbolaspectratio - Variable in class nxopen.uf.UFTabnot.CellPrefs

symbolAutoUpdate() - Method in interface nxopen.annotations.SymbolWorkflowBuilder

Returns the symbol auto update determines whether or not unlocked, associative custom symbol instances update automatically
License requirements: None.

SymbolCatalogBuilder - Interface in nxopen.annotations

Represents a builder to instantiate a symbol from a parameterized family of standard symbols defined in catalogs, e.g. for standard fasteners.

SymbolCatalogParameterBuilder - Interface in nxopen.annotations

This builder allows you to define one parameter for a symbol
To create a new instance of this class, use SymbolCatalogBuilder.newParameter()

Created in NX8.0.0

SymbolCatalogParameterBuilderList - Interface in nxopen.annotations

Represents a list of objects.

symbolCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use TrackDrawingChangesReportFilterBuilder.getReportFilterStatus(nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter) instead.

SymbolConnection() - Constructor for class nxopen.uf.UFDrf.SymbolConnection

SymbolConnection(UFDrf.SymbolConnectionType, Tag) - Constructor for class nxopen.uf.UFDrf.SymbolConnection

SymbolCreateData() - Constructor for class nxopen.uf.UFDrf.SymbolCreateData

SymbolCreateData(String, double, double, double, Tag) - Constructor for class nxopen.uf.UFDrf.SymbolCreateData

symbolData - Variable in class nxopen.uf.UFDrf.ArcInfo

symbolData - Variable in class nxopen.uf.UFDrf.AskWeldSymbolData

symbolData - Variable in class nxopen.uf.UFDrf.DraftAidLine

SymbolData() - Constructor for class nxopen.uf.UFDrf.SymbolData

SymbolData(double[], double[], double, double, double, Tag) - Constructor for class nxopen.uf.UFDrf.SymbolData

SymbolFile - Interface in nxopen.annotations

Represents a symbolFile
To create or edit an instance of this class, use SymbolFileBuilder

Created in NX8.0.0

SymbolFileBuilder - Interface in nxopen.annotations

Represents builder for drafting Symbol file builder
To create a new instance of this class, use SymbolFileCollection.createSymbolFileBuilder(nxopen.annotations.SymbolFile)

Created in NX8.0.0

SymbolFileCollection - Interface in nxopen.annotations

Represents a collection of SymbolFile objects
Use nxopen.Annotations#symbolFile to get the instance of this class.

symbolFiles() - Method in interface nxopen.annotations.AnnotationManager

Library Symbol collection .

symbolFont - Variable in class nxopen.annotations.AnnotationManager.LoadSymbolFontFromSbfFileData

symbolFont() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use TrackDrawingChangesGeneralBuilder.changeSymbolLineColorFontWidth() instead.

SymbolFont - Interface in nxopen

Represents a symbol font
This class cannot be created, but an instance can be obtained from AnnotationManager.loadSymbolFontFromSbfFile(java.lang.String) .

symbolFontFile() - Method in interface nxopen.annotations.LetteringStyleBuilder

Returns the symbol font file setting.

symbolFontTag - Variable in class nxopen.uf.UFDrf.SymbolData

symbolHeight - Variable in class nxopen.annotations.AnnotationManager.LoadSymbolFontFromSbfFileData

symbolHeight() - Method in interface nxopen.annotations.OrdinateDimensionPreferences

Returns the user defined symbol height
License requirements: None.

symbolHeight() - Method in interface nxopen.annotations.OrdinateStyleBuilder

Returns the symbol height
License requirements: None.

symbolHeight() - Method in interface nxopen.annotations.TextWithSymbolsBuilder

Returns the height of the embedded user-defined symbols if the symbol size method is TextWithSymbolsBuilder.SymbolSizingMethod.LENGTH_AND_HEIGHT
License requirements: None.

symbolHeight - Variable in class nxopen.uf.UFDrf.SymbolInstance

SYMBOLIC_THREAD - Static variable in class nxopen.annotations.HoleCalloutSettingsBuilder.Featuretype

symbolicDisplay - Variable in class nxopen.uf.UFPd.ProductAttribute

symbolicDisplay - Variable in class nxopen.uf.UFPd.ProductAttribute2

symbolInfo - Variable in class nxopen.uf.UFDrf.AskSymbolDataFromNameData

SymbolInstance() - Constructor for class nxopen.uf.UFDrf.SymbolInstance

SymbolInstance(Tag, boolean, double[], double, double, double, int, int, int, boolean, boolean) - Constructor for class nxopen.uf.UFDrf.SymbolInstance

symbolLeaderTerminatorCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use TrackDrawingChangesReportFilterBuilder.getReportFilterStatus(nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter) instead.

symbolLength() - Method in interface nxopen.annotations.OrdinateDimensionPreferences

Returns the user defined symbol length
License requirements: None.

symbolLength() - Method in interface nxopen.annotations.OrdinateStyleBuilder

Returns the symbol length
License requirements: None.

symbolLength() - Method in interface nxopen.annotations.TextWithSymbolsBuilder

Returns the length of the embedded user-defined symbols if the symbol size method is TextWithSymbolsBuilder.SymbolSizingMethod.LENGTH_AND_HEIGHT
License requirements: None.

symbolLength - Variable in class nxopen.uf.UFDrf.SymbolInstance

symbolName() - Method in interface nxopen.annotations.BaseCustomSymbol

Returns the symbol name.

symbolName() - Method in interface nxopen.annotations.ChamferDimensionPreferences

Returns the symbol name
License requirements: None.

symbolName() - Method in interface nxopen.annotations.MasterCustomSymbolData

Deprecated.

Deprecated in NX9.0.0. Use MasterSymbolBuilder instead.

symbolName() - Method in interface nxopen.annotations.MasterSymbolBuilder

Returns the JA method support for accessing and setting Symbol Name value
License requirements: None.

symbolName() - Method in interface nxopen.annotations.ReplaceSymbolBuilder

Returns the symbol name
License requirements: None.

symbolName() - Method in interface nxopen.annotations.SymbolCatalogBuilder

Returns the name of the symbol.

symbolName - Variable in class nxopen.uf.UFDrf.AskEmbeddedUdsFontInfoData

symbolName - Variable in class nxopen.uf.UFDrf.ChamferDimensionData

symbolName - Variable in class nxopen.uf.UFDrf.SymbolCreateData

symbolNames - Variable in class nxopen.uf.UFDrf.AskSymbolDataFromNameData

symbolOriginCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use TrackDrawingChangesReportFilterBuilder.getReportFilterStatus(nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter) instead.

symbolPath() - Method in interface nxopen.annotations.ReplaceSymbolBuilder

Returns the symbol path
License requirements: None.

symbolPlacement() - Method in interface nxopen.annotations.ChamferDimensionPreferences

Returns the symbol placement
License requirements: None.

symbolPlacement() - Method in interface nxopen.annotations.DiameterRadiusPreferences

Returns the diameter/radius symbol placement relative to the dimension text
License requirements: None.

SymbolPreferences - Interface in nxopen.annotations

Represents symbol preferences .

symbolPreferences() - Method in interface nxopen.annotations.TextWithSymbolsBuilder

Returns the symbol preferences
License requirements: None.

SymbolPreferences() - Constructor for class nxopen.uf.UFDrf.SymbolPreferences

SymbolPreferences(double, UFDrf.Cfw, UFDrf.Cfw, UFDrf.Cfw, UFDrf.Cfw, UFDrf.Cfw, UFDrf.Cfw) - Constructor for class nxopen.uf.UFDrf.SymbolPreferences

symbolPreferencesOption() - Method in interface nxopen.annotations.CustomSymbolData

Deprecated.

Deprecated in NX9.0.0. Use DraftingCustomSymbolBuilder for Drafting Custom Symbol and PmiCustomSymbolBuilder for PMI Custom Symbol objects.

SymbolPreferencesOption - Class in nxopen.annotations

Specifies the custom symbol preferences for the following -
Crosshatch

Area fill

Color, font and line width
This option is only available when creating.

symbolRetainedStatusCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use TrackDrawingChangesReportFilterBuilder.getReportFilterStatus(nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter) instead.

symbolRule() - Method in interface nxopen.drafting.RulesBuilder

Returns the symbol rule
License requirements: None.

SYMBOLS - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter

Symbols Report Filter

SYMBOLS_LEADER_TERMINATOR - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter

Symbols Leader Terminator Report Filter

SYMBOLS_ORIGIN - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter

Symbols Origin Report Filter

SYMBOLS_RETAINED_STATUS - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter

Symbols Retained Status Report Filter

SYMBOLS_TEXT - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter

Symbols Text Report Filter

symbolScale() - Method in interface nxopen.annotations.LineWeldData

Returns the symbol scale
License requirements: None.

symbolScale() - Method in interface nxopen.annotations.OrdinateDimensionPreferences

Returns the user defined symbol scale
License requirements: None.

symbolScale() - Method in interface nxopen.annotations.OrdinateStyleBuilder

Returns the symbol scale
License requirements: None.

symbolScale() - Method in interface nxopen.annotations.TextWithSymbolsBuilder

Returns the scale of the embedded user-defined symbols if the symbol size method is TextWithSymbolsBuilder.SymbolSizingMethod.SCALE_AND_ASPECT_RATIO
License requirements: None.

SymbolsData() - Constructor for class nxopen.annotations.ForeshorteningSymbolBuilder.SymbolsData

symbolSize() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use TrackDrawingChangesGeneralBuilder.changeSymbolSize() instead.

symbolSize() - Method in interface nxopen.preferences.PartVisualizationLine

Returns the symbol size.

symbolSize - Variable in class nxopen.uf.UFDisp.SystemParams

symbolSizeMethod() - Method in interface nxopen.annotations.TextWithSymbolsBuilder

Returns the method in which embedded user-defined symbols are scaled
License requirements: None.

symbolSmashToSketch() - Method in interface nxopen.annotations.SymbolWorkflowBuilder

Returns the symbol smash to sketch specifies if curve objects in symbols are added to a sketch on custom symbol smash
License requirements: None.

symbolStandard - Variable in class nxopen.uf.UFDrf.WeldSymbols

symbolStyle() - Method in interface nxopen.annotations.StyleBuilder

Returns the symbol style builder
License requirements: None.

SymbolStyleBuilder - Interface in nxopen.annotations

Represents a SymbolStyleBuilder .

SymbolStyleBuilder.FcfTextUnderlineOption - Class in nxopen.annotations

Represents the option to underline the additional FCF text

SymbolTable - Interface in nxopen.mechatronics

Represents the SymbolTable class SymbolTable contains Symbols that are used for Signal creation.

SymbolTableBuilder - Interface in nxopen.mechatronics

Represents a SymbolTableBuilder builder.

SymbolTableBuilder.DataType - Class in nxopen.mechatronics

Represents the data type.

SymbolTableBuilder.IOType - Class in nxopen.mechatronics

Represents the IO type.

SymbolTableBuilder.Symbol - Class in nxopen.mechatronics

Represents Symbol definition structure.

SymbolTableCollection - Interface in nxopen.mechatronics

Represents a collection of SymbolTable.

symbolTables() - Method in interface nxopen.mechatronics.PhysicsManager

Returns the SymbolTableCollection belonging to this part
Created in NX11.0.0

symbolTextCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use TrackDrawingChangesReportFilterBuilder.getReportFilterStatus(nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter) instead.

symbolToDimensionTextDistance() - Method in interface nxopen.annotations.RadialStyleBuilder

Returns the symbol to dimension text distance in character spaces
License requirements: None.

symbolToDimensionTextDistance - Variable in class nxopen.uf.UFDrf.DiameterRadiusPreferences

symbolType() - Method in interface nxopen.annotations.IdSymbolBuilder

Deprecated.

Deprecated in NX6.0.0. Use IdSymbolBuilder.type() instead.

symbolType() - Method in interface nxopen.annotations.ImportAutocadBlockBuilder

Returns the Symbol type.

symbolType() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use TrackDrawingChangesGeneralBuilder.changeSymbolType() instead.

symbolType - Variable in class nxopen.uf.UFDrf.ChamferDimensionData

symbolType - Variable in class nxopen.uf.UFPlist.Prefs

symbolType() - Method in interface nxopen.weld.JointExitBuilder

Returns the symbol to override the symbol computed from the joint parameters, if Symbol is not Symbol.NONE .

symbolWidth - Variable in class nxopen.annotations.AnnotationManager.LoadSymbolFontFromSbfFileData

symbolWidth() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder

Deprecated.

Deprecated in NX11.0.0. Use TrackDrawingChangesGeneralBuilder.changeSymbolLineColorFontWidth() instead.

symbolWorkflow() - Method in interface nxopen.drafting.PreferencesBuilder

Returns the SymbolWorkflow builder
License requirements: None.

SymbolWorkflowBuilder - Interface in nxopen.annotations

Represents a SymbolWorkflowBuilder
Created in NX9.0.0

SymbThreadData() - Constructor for class nxopen.uf.UFModl.SymbThreadData

SymbThreadData(Tag, Tag, double[], int, int, int, int, int, String, String, String, String, String, String, String, String, String, boolean) - Constructor for class nxopen.uf.UFModl.SymbThreadData

symfont - Variable in class nxopen.uf.UFDrf.OrddispInfo

symInfoBottom - Variable in class nxopen.uf.UFDrf.WeldSymbols

symInfoTop - Variable in class nxopen.uf.UFDrf.WeldSymbols

SYMM - Static variable in class nxopen.cae.LaminatePlyGroup.Link

symmetric layup

SYMMETRIC - Static variable in class nxopen.annotations.GeometricCharacteristic

Specifies symmetric characteristics

SYMMETRIC - Static variable in class nxopen.cae.LaminateGlobalLayup.StackingRecipeType

Symmetric

SYMMETRIC - Static variable in class nxopen.ExtrudeTaperDataTaperType

Symmetric taper

SYMMETRIC - Static variable in class nxopen.features.AeroFlangeBuilder.ThicknessDimensionOptions

SYMMETRIC - Static variable in class nxopen.features.AeroFlangeBuilder.WidthDimensionOptions

SYMMETRIC - Static variable in class nxopen.features.AeroRibBuilder.HeightDimensionOptions

SYMMETRIC - Static variable in class nxopen.features.AeroRibBuilder.ThicknessDimensionOptions

SYMMETRIC - Static variable in class nxopen.features.LawExtensionBuilder.OppositeSideExtensionOptions

Symmetric extension

SYMMETRIC - Static variable in class nxopen.features.LawExtensionBuilderEx.OppositeSideExtensionOptions

Symmetric extension

SYMMETRIC - Static variable in class nxopen.features.RibBuilder.RibThicknessOffsetOptions

Symmetric Offset

SYMMETRIC - Static variable in class nxopen.features.sheetmetal.BendTaperBuilder.BendTaperSides

Symmetric.

SYMMETRIC - Static variable in class nxopen.features.sheetmetal.BridgeTransitionBuilder.WidthOptions

Bridge Transition starts at specified point on start edge and extends on either side by half the specified distance.

SYMMETRIC - Static variable in class nxopen.features.sheetmetal.ContourFlangeBuilder.SweepTypeOptions

SYMMETRIC - Static variable in class nxopen.features.sheetmetal.GussetBuilder.WidthSides

The Gusset will be created on both sides of the plane of the user defined profile.

SYMMETRIC - Static variable in class nxopen.features.sheetmetal.NormalCutoutBuilder.DepthSideOptions

Material removed in both directions equally.

SYMMETRIC - Static variable in class nxopen.features.shipdesign.AlongGuideCutBuilder.WaterStopOffsetMethod

The left offset and right offset are symmetric

SYMMETRIC - Static variable in class nxopen.features.shipdesign.PillarBuilder.CapOptions

SYMMETRIC - Static variable in class nxopen.features.shipdesign.PillarBuilder.EndCutTypes

The same end cut is applied to both ends

SYMMETRIC - Static variable in class nxopen.features.shipdesign.PlateStockBuilder.ThickenOptions

Half of the thickness is applied to back and front sides of the offset mold face.

SYMMETRIC - Static variable in class nxopen.features.shipdesign.ProfileBuilder.EndCutOption

SYMMETRIC - Static variable in class nxopen.features.shipdesign.SteelSupportBuilder.CapOptions

SYMMETRIC - Static variable in class nxopen.features.shipdesign.StiffenerBuilder.EndCutTypes

The same end cut is applied to both ends

Symmetric - Interface in nxopen.features

Represents a symmetric feature.

SYMMETRIC - Static variable in class nxopen.geometricutilities.Extend.ExtendType

SYMMETRIC - Static variable in class nxopen.geometricutilities.ExtensionSide

Extension Side Symmetric

SYMMETRIC - Static variable in class nxopen.geometricutilities.SimpleDraft.SimpleDraftType

Draft on both sides of the profile using the same angle

SYMMETRIC - Static variable in class nxopen.motion.TirePropertyTnoBuilder.TireSideType

SYMMETRIC - Static variable in class nxopen.Sketch.AutoDimensioningRule

Create Symmetric Dimensions

SYMMETRIC - Static variable in class nxopen.SketchChamferBuilder.ChamferOptions

Symmetric - specify one distance

SYMMETRIC - Static variable in class nxopen.SketchConstraintBuilder.Constraint

symmetric - Variable in class nxopen.uf.UFSo.SplineData

SYMMETRIC_OFFSET - Static variable in class nxopen.ExtrudeOffsetDataOffsetType

Offset with same distance in both directions

SYMMETRIC_OFFSET - Static variable in class nxopen.features.ResizeChamferBuilder.SectionType

SYMMETRIC_OFFSET - Static variable in class nxopen.geometricutilities.Type

Offset with same distance in both directions

SYMMETRIC_OFFSETS - Static variable in class nxopen.features.ChamferBuilder.ChamferOption

Symmetric offsets

SYMMETRIC_TYPE - Static variable in class nxopen.uf.UFGdt.Characteristic

SYMMETRIC_WITH_CORE - Static variable in class nxopen.cae.LaminateGlobalLayup.StackingRecipeType

Symmetric with core

SYMMETRICAL_CLINE - Static variable in class nxopen.uf.UFDrf.ValidClineForm

SymmetricalCenterline - Interface in nxopen.annotations

Represents a Symmetrical Centerline
To create or edit an instance of this class, use SymmetricalCenterlineBuilder

Created in NX6.0.0

SymmetricalCenterlineBuilder - Interface in nxopen.annotations

Builder for creating Symmetrical Centerline.

SymmetricalCenterlineBuilder.Types - Class in nxopen.annotations

the valid types of Symmetrical Centerline

SymmetricalCenterlineSettingsBuilder - Interface in nxopen.annotations

Represents a Builder for Symmetrical Centerline Settings .

symmetricalStructure() - Method in interface nxopen.features.shipdesign.SectionEditorBuilder

Returns the symmetrical structure
License requirements: None.

symmetricalStructure() - Method in interface nxopen.features.shipdesign.SectionViewBuilder

Returns the symmetrical structure
License requirements: None.

symmetricAngle() - Method in interface nxopen.features.DraftBuilder

Returns whether draft angles on both sides of the parting reference are symmetric
License requirements: None.

SymmetricBuilder - Interface in nxopen.features

Represents a Symmetric builder
To create a new instance of this class, use FeatureCollection.createSymmetricBuilder(nxopen.features.Symmetric)
Default values.

SymmetricBuilder.PlaneOptions - Class in nxopen.features

Represents the plane options.

symmetricEnabled() - Method in interface nxopen.features.CurveFinderBuilder

Returns a value that indicates whether add symmetric relation recognition for the last curves added to curve collector
License requirements: None.

symmetricEnabled() - Method in interface nxopen.features.FaceRecognitionBuilder

Returns a value that indicates whether symmetric relation recognition is enabled
License requirements: None.

symmetricLoadBendingStressMaximum(double, double, double, double) - Method in interface nxopen.EngineeringFunction

Calculate the maximum bending stress under two symmetric loads.

symmetricLoadDisplacement(double, double, double, double, double, double) - Method in interface nxopen.EngineeringFunction

Calculate the displacement under two symmetric loads.

symmetricLoadDisplacementMaximum(double, double, double, double, double) - Method in interface nxopen.EngineeringFunction

Calculate the maximum displacement under two symmetric loads.

symmetricLoadMoment(double, double, double, double) - Method in interface nxopen.EngineeringFunction

Calculate the moment under two symmetric loads.

symmetricLoadMomentMaximum(double, double, double) - Method in interface nxopen.EngineeringFunction

Calculate the maximum moment under two symmetric loads.

symmetricLoadShearForce(double, double, double, double) - Method in interface nxopen.EngineeringFunction

Calculate the shear force under two symmetric loads.

symmetricLoadShearForceMaximum(double) - Method in interface nxopen.EngineeringFunction

Calculate the maximum shear force under two symmetric loads.

symmetricLoadSlope(double, double, double, double, double, double) - Method in interface nxopen.EngineeringFunction

Calculate the slope under two symmetric loads.

symmetricLoadSlopeMaximum(double, double, double, double, double) - Method in interface nxopen.EngineeringFunction

Calculate the maximum slope under two symmetric loads.

symmetricOffsets() - Method in interface nxopen.features.shipdesign.EdgeCutBuilder

Returns the symmetric offsets toggle.

symmetricOption() - Method in interface nxopen.geometricutilities.Limits

Returns the symmetric option
License requirements: solid_modeling ("SOLIDS MODELING")
.

symmetricSides() - Method in interface nxopen.features.sheetmetal.JoggleBuilder

Returns the symmetric sides
License requirements: None.

SYMMETRY - Static variable in class nxopen.annotations.FeatureControlFrameBuilder.FcfCharacteristic

symmetry

SYMMETRY - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.CharacteristicOptions

symmetry

SYMMETRY - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.TolType

Symmetry

symmetry() - Method in interface nxopen.die.DrawBeadSegmentBuilder

Returns the value identifying that the male width is symmetrical about the location and reference direction.

symmetryOption() - Method in interface nxopen.features.CurveFinderBuilder

Returns a value that indicates which symmetric option is
License requirements: None.

symmetryPlane() - Method in interface nxopen.cae.optimization.TBSShapeLinkCondition

Returns the symmetry plane, which is only available when CAE.Optimization.TBSShapeLinkCondition#manufacturingType and CAE.Optimization.TBSShapeLinkCondition#setManufacturingType is set to CAE.Optimization.TBSShapeLinkCondition.ManufacturingOption#PLANE_SYMMETRY
License requirements: None.

symmetryPlane() - Method in interface nxopen.features.EdgeSymmetryBuilder

Returns the symmetry plane
License requirements: None.

symmetryPlaneOption() - Method in interface nxopen.features.EdgeSymmetryBuilder

Returns the symmetry plane option
License requirements: None.

symmetryPlaneOption() - Method in interface nxopen.features.SymmetricBuilder

Returns the symmetry plane option.

symmetryReference() - Method in interface nxopen.features.CurveFinderBuilder

Returns the symmetry line reference
License requirements: None.

symmetryType() - Method in interface nxopen.cae.optimization.TBSTopologyLinkCondition

Returns the symmetry link condition type
License requirements: None.

SYNC - Static variable in class nxopen.sim.SimDebugBuilder.TraceType

Trace Sync

syncArrangements() - Method in interface nxopen.pdm.PartOperationImportBuilder

Deprecated.

Deprecated in NX10.0.2. It is no longer supported.

syncComponentAttrs(boolean) - Method in interface nxopen.routing.Stock

Set the characteristics of the given stock's component so that it has the same characteristics as the Stock and its stock data.

SYNCED - Static variable in class nxopen.layout2d.Layout2dDefinitionStatus

synchroniseOnLoad() - Method in interface nxopen.preferences.SessionPdm

Returns the kind of synchronisation performed when a part is loaded
License requirements: None.

synchroniseOnSave() - Method in interface nxopen.preferences.SessionPdm

Returns the kind of synchronisation performed when a part is saved
License requirements: None.

synchronizationTime() - Method in interface nxopen.mechatronics.PreferencesBuilder

Returns the time interval to do synchronization with SIMIT
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

SYNCHRONIZE - Static variable in class nxopen.cam.SimulationOptionsBuilder.DialogType

synchronize

SYNCHRONIZE_MANAGER_XTP - Static variable in class nxopen.sim.SimDebugBuilder.DumpType

Dump SynchronizeManagerXtp

SYNCHRONIZE_UI - Static variable in class nxopen.sim.SimDebugBuilder.DumpType

Dump Synchronize UI

synchronizeArcsFlag() - Method in interface nxopen.cae.FemSynchronizeOptions

Returns the synchronize arcs flag
License requirements: None.

synchronizeAttributes() - Method in interface nxopen.assemblies.AssembliesGeneralPropertiesBuilder

Synchronize the attributes on the components
License requirements: None.

synchronizeConicsFlag() - Method in interface nxopen.cae.FemSynchronizeOptions

Returns the synchronize conics flag
License requirements: None.

synchronizeCoordinateSystemFlag() - Method in interface nxopen.cae.FemSynchronizeOptions

Returns the synchronize coordinate system flag
License requirements: None.

synchronizeDesignView() - Method in interface nxopen.features.shipdesign.SynchronizeDesignViewBuilder

Loops through all selected parts and synchronizes body features from design view to manufacturing view.

SynchronizeDesignViewBuilder - Interface in nxopen.features.shipdesign

This class is used to synchronize body features from design view to manufacturing view.

synchronizeDisplay() - Method in interface nxopen.assemblies.AssembliesGeneralPropertiesBuilder

Synchronize the display on the components
License requirements: None.

synchronizeLayers() - Method in interface nxopen.assemblies.AssembliesGeneralPropertiesBuilder

Synchronize the layers on the components
License requirements: None.

synchronizeLinesFlag() - Method in interface nxopen.cae.FemSynchronizeOptions

Returns the synchronize lines flag
License requirements: None.

synchronizeParametersWithProfileBody(TaggedObject) - Method in interface nxopen.features.shipdesign.ProfileCutoutBuilder

Updates the parameters in profile cutout builder using profile body.

synchronizePointsFlag() - Method in interface nxopen.cae.FemSynchronizeOptions

Returns the synchronize points flag
License requirements: None.

synchronizeRecords(double, AfuMathOperation.InterpolationMode, boolean, String[], int[], AfuMathOperation.OutputType, String) - Method in interface nxopen.cae.AfuMathOperation

Synchronize AFU Data Records
License requirements: nx_ftk ("NX Advanced Graphing")
.

synchronizeSections(boolean, Section, Section) - Method in interface nxopen.features.AOCSBuilder

Synchronize the second section data consistent to the first one
License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.

synchronizeSketchCurvesFlag() - Method in interface nxopen.cae.FemSynchronizeOptions

Returns the synchronize sketch curves flag
License requirements: None.

synchronizeSplinesFlag() - Method in interface nxopen.cae.FemSynchronizeOptions

Returns the synchronize splines flag
License requirements: None.

synchronizeSymbol() - Method in interface nxopen.annotations.BaseCustomSymbol

Synchronize associative custom symbol.

synchronizeWithCommands() - Method in interface nxopen.report.Report

Synchronize the Report.Report with commands.

SYNCHRONOUS - Static variable in class nxopen.display.IRayPlusStudioEditorBuilder.IRayPlusStudioRemoteRenderVideoType

synchronousCurveCollection() - Method in interface nxopen.features.FeatureCollection

Returns the SynchronousCurveCollection instance belonging to this part .

SynchronousCurveCollection - Interface in nxopen.features

This class contains the factory method for creating ST curve builder.

synchronousEdgeCollection() - Method in interface nxopen.features.FeatureCollection

Returns the SynchronousEdgeCollection instance belonging to this part .

SynchronousEdgeCollection - Interface in nxopen.features

This class contains the factory method for creating ship feature builder.

syncOrigin() - Method in interface nxopen.tooling.DieEngDieTipBuilder

Returns the synchroous origin toggle option
License requirements: die_engineering ("DIE ENGINEERING")
.

syncViews() - Method in interface nxopen.View

Returns the "Synchronized Views" toggle state of a view.

syntaxCheck(String) - Method in interface nxopen.RuleManager

Run the syntax check on a dfa file.

SYS - Static variable in class nxopen.cam.LaserControlPoint.ControlPointTypes

sys

sysDefidenticalPointResolution() - Method in interface nxopen.IgesCreator

Returns the sys defidentical point resolution - if set to true then system defined tolerance will be used to find identical points
License requirements: None.

sysDefmaxThreeDMdlSpace() - Method in interface nxopen.IgesCreator

Returns the sys defmaxThreeDmdl space - if set to true then system defined maximum 3D model space will be used
License requirements: None.

SYSLOG - Static variable in class nxopen.sim.SimDebugBuilder.OutputType

Output to syslog

SYSNOISE_DB - Static variable in class nxopen.cae.Result.Filetype

SYSTEM - Static variable in class nxopen.cam.CamPathToolpathEventType

SYSTEM - Static variable in class nxopen.cam.ToolpathEventType

SYSTEM - Static variable in class nxopen.die.AddendumSectionBuilder.SectionShapeType

Section shape determined by blending neighboring sections.

SYSTEM - Static variable in class nxopen.routing.ControlPoint.DefinedStatus

Created automatically by the application.

SYSTEM - Static variable in class nxopen.routing.IsoDrawingBuilder.DrawingTypes

SYSTEM - Static variable in class nxopen.RuleManager.Filter

System classes only

SYSTEM_DEFAULT - Static variable in class nxopen.display.TransientText.StandardTextRef

Display the text using the system default reference point position

SYSTEM_DEFAULT - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.StandardTextRef

Display the text using the system default reference point position

SYSTEM_DEFAULT - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.TextRef

Display the text using the system default

SYSTEM_DEFINED_SXSEG - Static variable in class nxopen.uf.UFDraw.SxsegMode

SYSTEM_KEY - Static variable in class nxopen.tooling.SpreadsheetData.ParameterStatus

This is system key parameter

SYSTEM_KEY - Static variable in class nxopen.tooling.SpreadsheetDataParameter.Status

This is system key parameter

SYSTEM_LOADED - Static variable in class nxopen.RuleManager.Filter

System classes that are loaded

SYSTEM_SCENE - Static variable in class nxopen.display.EnvironmentBuilder.ToneMappingTypes

systemColor - Variable in class nxopen.uf.UFDisp.DrawingDisplayData

systemDatatype() - Method in interface nxopen.visualreporting.Property

Returns the preferred Property.DatatypeOption that should be used for the owning Condition or Classifier .

SYSTEMDEFAULT - Static variable in class nxopen.uf.UFDisp.TextRef

SystemDefinition - Interface in nxopen.routing.electrical

Represents a SystemDefinition
Creator not available in KF.

SystemDevice - Interface in nxopen.routing.electrical

The Electrical SystemDevice corresponds to a system instance of the SingleDevice .

SystemDeviceCollection - Interface in nxopen.routing.electrical

Represents a collection of SystemDevice objects.

systemDevices() - Method in interface nxopen.routing.RouteManager

SystemDevice collection .

systemEfficiency - Variable in class nxopen.tooling.SIZERExportBuilder.MCDMechanicalData

System Efficiency value

systemEfficiency - Variable in class nxopen.tooling.SIZERExportBuilder.MechanicalData

System Efficiency value

SystemInfo() - Constructor for class nxopen.uf.UF.SystemInfo

SystemInfo(String, String, String, String, String, String, String, int, String[], int) - Constructor for class nxopen.uf.UF.SystemInfo

SystemObject - Interface in nxopen.mechatronics

Represents the System Object.

SystemObject.AssociateItemData - Class in nxopen.mechatronics

This class holds the data returned from SystemObject.getAssociateItem(nxopen.mechatronics.SystemObject.RelationType)

SystemObject.RelationType - Class in nxopen.mechatronics

Relation type.

SystemObject.ReorderType - Class in nxopen.mechatronics

Reorder object type to specify the relative position.

SystemObjectBuilder - Interface in nxopen.mechatronics

Represents a SystemObject builder
This is an abstract class and cannot be created.

SystemParams() - Constructor for class nxopen.uf.UFDisp.SystemParams

SystemParams(double, double, double, double, double, double, double, int, int, int, int, int, int, boolean, boolean, int, int, int, boolean, int) - Constructor for class nxopen.uf.UFDisp.SystemParams

systemRename(Expression, String) - Method in interface nxopen.ExpressionCollection

Changes the name of the expression without marking system expressions as user expressions.

SystemRoot - Interface in nxopen.mechatronics

Represents the System Root class.

SystemRoot.Type - Class in nxopen.mechatronics

the system root types.

SZ - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z _