nxopen.features

Interface EdgeBlendBuilder

All Superinterfaces:

Builder, FeatureBuilder, IComponentBuilder, Remote, TaggedObject

public interface EdgeBlendBuilder
extends FeatureBuilder

Represents a Edge Blend builder.
To create a new instance of this class, use FeatureCollection.createEdgeBlendBuilder(nxopen.features.Feature)
Default values.

Property	Value
TrimmingOption	False

Created in NX4.0.0

Nested Class Summary

Nested Classes

Modifier and Type	Interface and Description
static class	EdgeBlendBuilder.ChainsetAndSectionValueData This class holds the data returned from getChainsetAndSectionValue(int)
static class	EdgeBlendBuilder.ChainsetAndStatusData This class holds the data returned from getChainsetAndStatus(int)
static class	EdgeBlendBuilder.ChainsetData This class holds the data returned from getChainset(int)
static class	EdgeBlendBuilder.Conic This enum represents the Conic option
static class	EdgeBlendBuilder.FaceContinuity The Blend Face Continuity
static class	EdgeBlendBuilder.OrderOfBlending This enum represents the order of Blending
static class	EdgeBlendBuilder.Overlap This enum represents the Overlap resolution options for Edge Blend
static class	EdgeBlendBuilder.Rhotype This enum represents the rho type for conic section blend
static class	EdgeBlendBuilder.Section This enum represents the Section option
static class	EdgeBlendBuilder.Setback This enum represents the Setback option
static class	EdgeBlendBuilder.SetbackData This class holds the data returned from getSetbackData(int)
static class	EdgeBlendBuilder.StopshortData This class holds the data returned from getStopshortData(int)
static class	EdgeBlendBuilder.VariableRadiusData This class holds the data returned from getVariableRadiusData(nxopen.Edge)
static class	EdgeBlendBuilder.VariableRadiusDataNewData This class holds the data returned from getVariableRadiusDataNew(nxopen.Edge)

Method Summary

Modifier and Type	Method and Description
int	addChainset(ScCollector collector, EdgeBlendBuilder.Section sectionType, EdgeBlendBuilder.Conic conicMethod, EdgeBlendBuilder.Rhotype rhoType, String radius, String center, String rho) Add an edge blend chainset to the edge blend License requirements: solid_modeling ("SOLIDS MODELING") .
int	addChainset(ScCollector collector, String radius) Add an edge blend chainset to the edge blend License requirements: solid_modeling ("SOLIDS MODELING") .
int	addNewStopshortData(BlendStopshortBuilder builder) Add an edge blend stop short data for an edge in the edge blend License requirements: solid_modeling ("SOLIDS MODELING") .
int	addSetbackData(Edge[] edgeArray, boolean[] fromStart, String[] distance) Add an edge blend setback data for an edge in the edge blend License requirements: solid_modeling ("SOLIDS MODELING") .
int	addStopshortData(Edge edge, boolean fromStart, String distance) Deprecated. Deprecated in NX5.0.0. Use Features.EdgeBlendBuilder#addNewStopshortData instead.
int	addVariablePointData(Edge edge, String parameter, String radius, String centerValue, String rhoValue, Point smartPoint, boolean isExternal, boolean isArclength) Add an edge blend variable radius data for an edge in the edge blend License requirements: solid_modeling ("SOLIDS MODELING") .
int	addVariableRadiusData(Edge edge, double parameter, String radius, Point smartPoint, boolean isExternal) Deprecated. Deprecated in NX6.0.0. Use Features.EdgeBlendBuilder#addVariableRadiusDataNew instead.
int	addVariableRadiusDataNew(Edge edge, String parameter, String radius, Point smartPoint, boolean isExternal) Add an edge blend variable radius data for an edge in the edge blend Note: This ja will always create arclength parameter License requirements: solid_modeling ("SOLIDS MODELING") .
int	addVariableRadiusDataNew(Edge edge, String parameter, String radius, Point smartPoint, boolean isExternal, boolean isArclength) Add an edge blend variable radius data for an edge in the edge blend License requirements: solid_modeling ("SOLIDS MODELING") .
boolean	allInstancesOption() Returns the blend all instances option License requirements: None.
EdgeBlendBuilder.FaceContinuity	blendFaceContinuity() Returns the Blend Face Continuity option License requirements: None.
EdgeBlendBuilder.OrderOfBlending	blendOrder() Returns the order of blending for edge blend License requirements: None.
ScCollector	cliffEdges() Returns the forced cliff edges for edge blend License requirements: None.
boolean	convexConcaveY() Returns the Special blend at convex / concave Y option License requirements: None.
void	editVariablePointData(Edge edge, int vrIndex, String parameter, String radius, String centerValue, String rhoValue, Point smartPoint, boolean isExternal, boolean isArclength) Edit an edge blend variable radius data for an edge in the edge blend License requirements: solid_modeling ("SOLIDS MODELING") .
void	editVariableRadiusData(Edge edge, int vrIndex, double parameter, String radius, Point smartPoint, boolean isExternal) Deprecated. Deprecated in NX6.0.0. Use Features.EdgeBlendBuilder#editVariableRadiusDataNew instead.
void	editVariableRadiusDataNew(Edge edge, int vrIndex, String parameter, String radius, Point smartPoint, boolean isExternal) Edit an edge blend variable radius data for an edge in the edge blend License requirements: solid_modeling ("SOLIDS MODELING") .
void	editVariableRadiusDataNew(Edge edge, int vrIndex, String parameter, String radius, Point smartPoint, boolean isExternal, boolean isArclength) Edit an edge blend variable radius data for an edge in the edge blend License requirements: solid_modeling ("SOLIDS MODELING") .
EdgeBlendBuilder.ChainsetData	getChainset(int csIndex) Get collector and radius for an edge blend chainset given the index of the chainset License requirements: None.
EdgeBlendBuilder.ChainsetAndSectionValueData	getChainsetAndSectionValue(int csIndex) Get collector, radius and section types for an edge blend chainset given the index of the chainset License requirements: None.
EdgeBlendBuilder.ChainsetAndStatusData	getChainsetAndStatus(int csIndex) Get collector, radius and validity status for an edge blend chainset given the index of the chainset License requirements: None.
int	getChainsetIndex(ScCollector collector) Get the index of edge blend chainset given the collector License requirements: None.
BlendStopshortBuilder	getNewStopshortData(int ssIndex) Get an edge blend stop short data for the index provided License requirements: None.
int	getNumberOfValidChainsets() Get the number of valid chainsets License requirements: None.
EdgeBlendBuilder.SetbackData	getSetbackData(int sbIndex) Get an edge blend setback data for the index provided License requirements: None.
EdgeBlendBuilder.StopshortData	getStopshortData(int ssIndex) Deprecated. Deprecated in NX5.0.0. Use Features.EdgeBlendBuilder#getNewStopshortData instead.
EdgeBlendBuilder.VariableRadiusData	getVariableRadiusData(Edge edge) Deprecated. Deprecated in NX6.0.0. Use Features.EdgeBlendBuilder#getVariableRadiusDataNew instead.
EdgeBlendBuilder.VariableRadiusDataNewData	getVariableRadiusDataNew(Edge edge) Get all the variable radii data for an edge in the edge blend License requirements: None.
boolean	limitFailingAreas() Returns the Limit Failing Areas option License requirements: None.
BlendLimitsData	limitsListData() Returns the limits list License requirements: None.
boolean	moveSharpEdge() Returns the Maintain blend and move sharp edges option License requirements: None.
ScCollector	nonCliffEdges() Returns the prohibited cliff edges for edge blend License requirements: None.
EdgeBlendBuilder.Overlap	overlapOption() Returns the overlap resolution for edge blend License requirements: None.
boolean	patchComplexGeometryAreas() Returns the Patch Areas option License requirements: None.
void	removeChainset(int csIndex) Delete an edge blend chainset from the edge blend.
void	removeChainsetByCollector(ScCollector collector) Delete an edge blend chainset from the edge blend.
void	removeNewStopshortData(BlendStopshortBuilder builder) Remove an edge blend stop short corresponding to a BlendStopshortBuilder License requirements: solid_modeling ("SOLIDS MODELING") .
boolean	removeSelfIntersection() Returns the Remove self-intersection option License requirements: None.
void	removeSetbackData(int sbIndex) Remove an edge blend setback data for an edge in the edge blend License requirements: solid_modeling ("SOLIDS MODELING") .
void	removeStopshortData(Edge edge, boolean fromStart) Deprecated. Deprecated in NX5.0.0. Use Features.EdgeBlendBuilder#removeNewStopshortData instead.
void	removeStopshortData(int ssIndex) Deprecated. Deprecated in NX5.0.0. Use Features.EdgeBlendBuilder#removeNewStopshortData instead.
void	removeStopshortDataByType(Edge edge, boolean fromStart, BlendStopshortBuilder.Choices type) Remove the stop short from an edge, given its type and location License requirements: solid_modeling ("SOLIDS MODELING") .
void	removeVariableRadiusData(Edge edge) Remove all variable radius datas on an edge License requirements: solid_modeling ("SOLIDS MODELING") .
void	removeVariableRadiusData(Edge edge, double parameter) Remove variable radius data on an edge by the parameter value of the point on the edge License requirements: solid_modeling ("SOLIDS MODELING") .
void	removeVariableRadiusDataByIndex(Edge edge, int index) Remove variable radius data on an edge by the index into the point array on the edge License requirements: solid_modeling ("SOLIDS MODELING") .
boolean	rollOntoEdge() Returns the Roll onto edges option License requirements: None.
boolean	rollOverSmoothEdge() Returns the Roll over smooth edges option License requirements: None.
boolean	segmentBlendFaces() Returns the Segment blend to match face segments option License requirements: None.
void	setAllInstancesOption(boolean optionValue) License requirements: solid_modeling ("SOLIDS MODELING") .
EdgeBlendBuilder.Setback	setbackOption() Returns the setback option for edge blend License requirements: None.
void	setBlendFaceContinuity(EdgeBlendBuilder.FaceContinuity optionValue) License requirements: solid_modeling ("SOLIDS MODELING") .
void	setBlendOrder(EdgeBlendBuilder.OrderOfBlending blendOrder) License requirements: solid_modeling ("SOLIDS MODELING") .
void	setCliffEdges(ScCollector cliffEdgeCollector) License requirements: solid_modeling ("SOLIDS MODELING") .
void	setConvexConcaveY(boolean optionValue) License requirements: solid_modeling ("SOLIDS MODELING") .
void	setLimitFailingAreas(boolean optionValue) License requirements: solid_modeling ("SOLIDS MODELING") .
void	setMoveSharpEdge(boolean optionValue) License requirements: solid_modeling ("SOLIDS MODELING") .
void	setNonCliffEdges(ScCollector nonCliffEdgeCollector) License requirements: solid_modeling ("SOLIDS MODELING") .
void	setOverlapOption(EdgeBlendBuilder.Overlap overlapOption) License requirements: solid_modeling ("SOLIDS MODELING") .
void	setPatchComplexGeometryAreas(boolean optionValue) License requirements: solid_modeling ("SOLIDS MODELING") .
void	setRemoveSelfIntersection(boolean optionValue) License requirements: solid_modeling ("SOLIDS MODELING") .
void	setRollOntoEdge(boolean optionValue) License requirements: solid_modeling ("SOLIDS MODELING") .
void	setRollOverSmoothEdge(boolean optionValue) License requirements: solid_modeling ("SOLIDS MODELING") .
void	setSegmentBlendFaces(boolean optionValue) License requirements: solid_modeling ("SOLIDS MODELING") .
void	setSetbackOption(EdgeBlendBuilder.Setback setbackOption) License requirements: solid_modeling ("SOLIDS MODELING") .
void	setTolerance(double tolerance) License requirements: solid_modeling ("SOLIDS MODELING") .
void	setTrimmingOption(boolean optionValue) License requirements: solid_modeling ("SOLIDS MODELING") .
void	setZeroSlopeRadiusFunctionAtChainEnds(boolean optionValue) License requirements: solid_modeling ("SOLIDS MODELING") .
double	tolerance() Returns the tolerance of a variable blend License requirements: None.
boolean	trimmingOption() Returns the trimming option License requirements: None.
boolean	zeroSlopeRadiusFunctionAtChainEnds() Returns the zero slope radius function at chain ends option License requirements: None.

Methods inherited from interface nxopen.features.FeatureBuilder

commitFeature, getFeature, hideInternalParentFeatureAfterEdit, parentFeatureInternal, patchSolutionFlag, patchSurfaceFilename, setParentFeatureInternal, setParentFeatureInternal, setPatchSolutionFlag, setPatchSurfaceFilename, setSurroundingPatchSurfaceFilename, showInternalParentFeatureForEdit, surroundingPatchSurfaceFilename, unsetParentFeatureInternal

Methods inherited from interface nxopen.Builder

commit, destroy, getCommittedObjects, getObject, showResults

Methods inherited from interface nxopen.TaggedObject

printTestData, printTestData, tag, tagValue

Methods inherited from interface nxopen.geometricutilities.IComponentBuilder

validate

Method Detail

tolerance

double tolerance()
          throws NXException,
                 RemoteException

Returns the tolerance of a variable blend
License requirements: None.

Created in NX4.0.0

Throws:

NXException

RemoteException

setTolerance

void setTolerance(double tolerance)
           throws NXException,
                  RemoteException

License requirements: solid_modeling ("SOLIDS MODELING")
.
Created in NX4.0.0

Parameters:

tolerance -

Throws:

NXException

RemoteException

allInstancesOption

boolean allInstancesOption()
                    throws NXException,
                           RemoteException

Returns the blend all instances option
License requirements: None.

Created in NX4.0.0

Throws:

NXException

RemoteException

setAllInstancesOption

void setAllInstancesOption(boolean optionValue)
                    throws NXException,
                           RemoteException

License requirements: solid_modeling ("SOLIDS MODELING")
.
Created in NX4.0.0

Parameters:

optionValue -

Throws:

NXException

RemoteException

removeSelfIntersection

boolean removeSelfIntersection()
                        throws NXException,
                               RemoteException

Returns the Remove self-intersection option
License requirements: None.

Created in NX4.0.0

Throws:

NXException

RemoteException

setRemoveSelfIntersection

void setRemoveSelfIntersection(boolean optionValue)
                        throws NXException,
                               RemoteException

License requirements: solid_modeling ("SOLIDS MODELING")
.
Created in NX4.0.0

Parameters:

optionValue -

Throws:

NXException

RemoteException

patchComplexGeometryAreas

boolean patchComplexGeometryAreas()
                           throws NXException,
                                  RemoteException

Returns the Patch Areas option
License requirements: None.

Created in NX8.5.0

Throws:

NXException

RemoteException

setPatchComplexGeometryAreas

void setPatchComplexGeometryAreas(boolean optionValue)
                           throws NXException,
                                  RemoteException

License requirements: solid_modeling ("SOLIDS MODELING")
.
Created in NX8.5.0

Parameters:

optionValue -

Throws:

NXException

RemoteException

limitFailingAreas

boolean limitFailingAreas()
                   throws NXException,
                          RemoteException

Returns the Limit Failing Areas option
License requirements: None.

Created in NX8.5.0

Throws:

NXException

RemoteException

setLimitFailingAreas

void setLimitFailingAreas(boolean optionValue)
                   throws NXException,
                          RemoteException

License requirements: solid_modeling ("SOLIDS MODELING")
.
Created in NX8.5.0

Parameters:

optionValue -

Throws:

NXException

RemoteException

rollOverSmoothEdge

boolean rollOverSmoothEdge()
                    throws NXException,
                           RemoteException

Returns the Roll over smooth edges option
License requirements: None.

Created in NX4.0.0

Throws:

NXException

RemoteException

setRollOverSmoothEdge

void setRollOverSmoothEdge(boolean optionValue)
                    throws NXException,
                           RemoteException

License requirements: solid_modeling ("SOLIDS MODELING")
.
Created in NX4.0.0

Parameters:

optionValue -

Throws:

NXException

RemoteException

rollOntoEdge

boolean rollOntoEdge()
              throws NXException,
                     RemoteException

Returns the Roll onto edges option
License requirements: None.

Created in NX4.0.0

Throws:

NXException

RemoteException

setRollOntoEdge

void setRollOntoEdge(boolean optionValue)
              throws NXException,
                     RemoteException

License requirements: solid_modeling ("SOLIDS MODELING")
.
Created in NX4.0.0

Parameters:

optionValue -

Throws:

NXException

RemoteException

moveSharpEdge

boolean moveSharpEdge()
               throws NXException,
                      RemoteException

Returns the Maintain blend and move sharp edges option
License requirements: None.

Created in NX4.0.0

Throws:

NXException

RemoteException

setMoveSharpEdge

void setMoveSharpEdge(boolean optionValue)
               throws NXException,
                      RemoteException

License requirements: solid_modeling ("SOLIDS MODELING")
.
Created in NX4.0.0

Parameters:

optionValue -

Throws:

NXException

RemoteException

convexConcaveY

boolean convexConcaveY()
                throws NXException,
                       RemoteException

Returns the Special blend at convex / concave Y option
License requirements: None.

Created in NX4.0.0

Throws:

NXException

RemoteException

setConvexConcaveY

void setConvexConcaveY(boolean optionValue)
                throws NXException,
                       RemoteException

License requirements: solid_modeling ("SOLIDS MODELING")
.
Created in NX4.0.0

Parameters:

optionValue -

Throws:

NXException

RemoteException

addChainset

int addChainset(ScCollector collector,
                String radius)
         throws NXException,
                RemoteException

Add an edge blend chainset to the edge blend
License requirements: solid_modeling ("SOLIDS MODELING")
.
Created in NX4.0.0

Parameters:

collector - The collector for this edge blend chainset

radius - The radius of this chain set collector

Returns:

Index of chainset, indicating which chainset we are dealing with

Throws:

NXException

RemoteException

addChainset

int addChainset(ScCollector collector,
                EdgeBlendBuilder.Section sectionType,
                EdgeBlendBuilder.Conic conicMethod,
                EdgeBlendBuilder.Rhotype rhoType,
                String radius,
                String center,
                String rho)
         throws NXException,
                RemoteException

Add an edge blend chainset to the edge blend
License requirements: solid_modeling ("SOLIDS MODELING")
.
Created in NX8.0.0

Parameters:

collector - The collector for this edge blend chainset

sectionType - Shape specifier for this chainset

conicMethod - Shape subtype specifier for this chainset

rhoType - rho type for this chain set

radius - The radius of this chain set collector

center - The conic center value of this chain set collector if type is Conic

rho - The conic rho value of this chain set collector if type is Conic

Returns:

Index of chainset, indicating which chainset we are dealing with

Throws:

NXException

RemoteException

getChainsetIndex

int getChainsetIndex(ScCollector collector)
              throws NXException,
                     RemoteException

Get the index of edge blend chainset given the collector
License requirements: None.

Created in NX4.0.0

Parameters:

collector - The collector for this edge blend chainset

Returns:

Index of chainset, indicating which chainset we are dealing with

Throws:

NXException

RemoteException

getNumberOfValidChainsets

int getNumberOfValidChainsets()
                       throws NXException,
                              RemoteException

Get the number of valid chainsets
License requirements: None.

Created in NX5.0.0

Returns:

Number of valid chainsets

Throws:

NXException

RemoteException

getChainset

EdgeBlendBuilder.ChainsetData getChainset(int csIndex)
                                   throws NXException,
                                          RemoteException

Get collector and radius for an edge blend chainset given the index of the chainset
License requirements: None.

Created in NX4.0.0

Parameters:

csIndex - Index of chainset, indicating which chainset we are dealing with

Throws:

NXException

RemoteException

getChainsetAndSectionValue

EdgeBlendBuilder.ChainsetAndSectionValueData getChainsetAndSectionValue(int csIndex)
                                                                 throws NXException,
                                                                        RemoteException

Get collector, radius and section types for an edge blend chainset given the index of the chainset
License requirements: None.

Created in NX10.0.3

Parameters:

csIndex - Index of chainset

Throws:

NXException

RemoteException

getChainsetAndStatus

EdgeBlendBuilder.ChainsetAndStatusData getChainsetAndStatus(int csIndex)
                                                     throws NXException,
                                                            RemoteException

Get collector, radius and validity status for an edge blend chainset given the index of the chainset
License requirements: None.

Created in NX5.0.0

Parameters:

csIndex - Index of chainset

Throws:

NXException

RemoteException

removeChainset

void removeChainset(int csIndex)
             throws NXException,
                    RemoteException

Delete an edge blend chainset from the edge blend.
License requirements: solid_modeling ("SOLIDS MODELING")

Created in NX4.0.0

Parameters:

csIndex - Index of chainset, indicating which chainset we are dealing with

Throws:

NXException

RemoteException

removeChainsetByCollector

void removeChainsetByCollector(ScCollector collector)
                        throws NXException,
                               RemoteException

Delete an edge blend chainset from the edge blend.
License requirements: solid_modeling ("SOLIDS MODELING")

Created in NX4.0.0

Parameters:

collector - The collector for this edge blend chainset

Throws:

NXException

RemoteException

getSetbackData

EdgeBlendBuilder.SetbackData getSetbackData(int sbIndex)
                                     throws NXException,
                                            RemoteException

Get an edge blend setback data for the index provided
License requirements: None.

Created in NX4.0.0

Parameters:

sbIndex - Index of where setback data item was created.

Returns:

a SetbackData object

Throws:

NXException

RemoteException

addSetbackData

int addSetbackData(Edge[] edgeArray,
                   boolean[] fromStart,
                   String[] distance)
            throws NXException,
                   RemoteException

Add an edge blend setback data for an edge in the edge blend
License requirements: solid_modeling ("SOLIDS MODELING")
.
Created in NX4.0.0

Parameters:

edgeArray - Array of Edge collector tags that are used by the setback

fromStart - if true, then the setback is defined at the start vertex. Otherwise, it is defined at the end vertex. There is one for each input edge.

distance - Array of distances

Returns:

Index of where setback data item is created.

Throws:

NXException

RemoteException

removeSetbackData

void removeSetbackData(int sbIndex)
                throws NXException,
                       RemoteException

Remove an edge blend setback data for an edge in the edge blend
License requirements: solid_modeling ("SOLIDS MODELING")
.
Created in NX4.0.0

Parameters:

sbIndex - Index of where setback data item was created

Throws:

NXException

RemoteException

getNewStopshortData

BlendStopshortBuilder getNewStopshortData(int ssIndex)
                                   throws NXException,
                                          RemoteException

Get an edge blend stop short data for the index provided
License requirements: None.

Created in NX5.0.0

Parameters:

ssIndex - Index of where stop short data item is created

Returns:

the Stopshort Data

Throws:

NXException

RemoteException

getStopshortData

EdgeBlendBuilder.StopshortData getStopshortData(int ssIndex)
                                         throws NXException,
                                                RemoteException

Deprecated. Deprecated in NX5.0.0. Use Features.EdgeBlendBuilder#getNewStopshortData instead.

Get an edge blend stop short data for the index provided
License requirements: None.

Created in NX4.0.0

Parameters:

ssIndex - Index of where stop short data item is created.

Returns:

a StopshortData object

Throws:

NXException

RemoteException

addNewStopshortData

int addNewStopshortData(BlendStopshortBuilder builder)
                 throws NXException,
                        RemoteException

Add an edge blend stop short data for an edge in the edge blend
License requirements: solid_modeling ("SOLIDS MODELING")
.
Created in NX5.0.0

Parameters:

builder - the Stopshort Data

Returns:

Index of where stop short data item is created.

Throws:

NXException

RemoteException

addStopshortData

int addStopshortData(Edge edge,
                     boolean fromStart,
                     String distance)
              throws NXException,
                     RemoteException

Deprecated. Deprecated in NX5.0.0. Use Features.EdgeBlendBuilder#addNewStopshortData instead.

Add an edge blend stop short data for an edge in the edge blend
License requirements: solid_modeling ("SOLIDS MODELING")
.
Created in NX4.0.0

Parameters:

edge - Edge to add stop short data on

fromStart - if true, then the stopshort is defined at the start vertex. Otherwise, it is defined at the end vertex.

distance - The distance for the stopshort on the edge.

Returns:

Index of where stop short data item is created.

Throws:

NXException

RemoteException

removeStopshortData

void removeStopshortData(Edge edge,
                         boolean fromStart)
                  throws NXException,
                         RemoteException

Deprecated. Deprecated in NX5.0.0. Use Features.EdgeBlendBuilder#removeNewStopshortData instead.

Remove an edge blend stop short data for an edge
License requirements: solid_modeling ("SOLIDS MODELING")
.
Created in NX4.0.0

Parameters:

edge - Edge to remove the stopshort on

fromStart - if true, then the stopshort is defined at the start vertex. Otherwise, it is defined at the end vertex.

Throws:

NXException

RemoteException

removeStopshortDataByType

void removeStopshortDataByType(Edge edge,
                               boolean fromStart,
                               BlendStopshortBuilder.Choices type)
                        throws NXException,
                               RemoteException

Remove the stop short from an edge, given its type and location
License requirements: solid_modeling ("SOLIDS MODELING")
.
Created in NX5.0.0

Parameters:

edge - Edge to remove the stopshort on

fromStart - if true, then the stopshort is defined at the start vertex. Otherwise, it is defined at the end vertex.

type - the type of the stopshort

Throws:

NXException

RemoteException

removeNewStopshortData

void removeNewStopshortData(BlendStopshortBuilder builder)
                     throws NXException,
                            RemoteException

Remove an edge blend stop short corresponding to a BlendStopshortBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
.
Created in NX5.0.0

Parameters:

builder - the Stopshort Data

Throws:

NXException

RemoteException

removeStopshortData

void removeStopshortData(int ssIndex)
                  throws NXException,
                         RemoteException

Deprecated. Deprecated in NX5.0.0. Use Features.EdgeBlendBuilder#removeNewStopshortData instead.

Remove an edge blend stop short data for the index indicated
License requirements: solid_modeling ("SOLIDS MODELING")
.
Created in NX4.0.0

Parameters:

ssIndex - Index of where stop short data item is created.

Throws:

NXException

RemoteException

getVariableRadiusData

EdgeBlendBuilder.VariableRadiusData getVariableRadiusData(Edge edge)
                                                   throws NXException,
                                                          RemoteException

Deprecated. Deprecated in NX6.0.0. Use Features.EdgeBlendBuilder#getVariableRadiusDataNew instead.

Get all the variable radii data for an edge in the edge blend
License requirements: None.

Created in NX4.0.0

Parameters:

edge - Edge to get all the varible radius data on

Returns:

a VariableRadiusData object

Throws:

NXException

RemoteException

getVariableRadiusDataNew

EdgeBlendBuilder.VariableRadiusDataNewData getVariableRadiusDataNew(Edge edge)
                                                             throws NXException,
                                                                    RemoteException

Get all the variable radii data for an edge in the edge blend
License requirements: None.

Created in NX6.0.0

Parameters:

edge - Edge to get all the varible radius data on

Throws:

NXException

RemoteException

addVariableRadiusData

int addVariableRadiusData(Edge edge,
                          double parameter,
                          String radius,
                          Point smartPoint,
                          boolean isExternal)
                   throws NXException,
                          RemoteException

Deprecated. Deprecated in NX6.0.0. Use Features.EdgeBlendBuilder#addVariableRadiusDataNew instead.

Add an edge blend variable radius data for an edge in the edge blend
License requirements: solid_modeling ("SOLIDS MODELING")
.
Created in NX4.0.0

Parameters:

edge - Edge to add stop short data on

parameter - Parameter location of point on the edge

radius - The radius at this point on the edge.

smartPoint - Smart Point defining the location of this vr

isExternal - Flag indicating whether this point is external to blend

Returns:

Index of where variable radius data item is created

Throws:

NXException

RemoteException

addVariableRadiusDataNew

int addVariableRadiusDataNew(Edge edge,
                             String parameter,
                             String radius,
                             Point smartPoint,
                             boolean isExternal)
                      throws NXException,
                             RemoteException

Add an edge blend variable radius data for an edge in the edge blend Note: This ja will always create arclength parameter
License requirements: solid_modeling ("SOLIDS MODELING")
.
Created in NX6.0.0

Parameters:

edge - Edge to add stop short data on

parameter - Parameter location of point on the edge

radius - The radius at this point on the edge.

smartPoint - Smart Point defining the location of this vr

isExternal - Flag indicating whether this point is external to blend

Returns:

Index of where variable radius data item is created

Throws:

NXException

RemoteException

addVariableRadiusDataNew

int addVariableRadiusDataNew(Edge edge,
                             String parameter,
                             String radius,
                             Point smartPoint,
                             boolean isExternal,
                             boolean isArclength)
                      throws NXException,
                             RemoteException

Add an edge blend variable radius data for an edge in the edge blend
License requirements: solid_modeling ("SOLIDS MODELING")
.
Created in NX6.0.0

Parameters:

edge - Edge to add stop short data on

parameter - Parameter location of point on the edge

radius - The radius at this point on the edge.

smartPoint - Smart Point defining the location of this vr

isExternal - Flag indicating whether this point is external to blend

isArclength - Flag indicating whether parameter is arclength or not

Returns:

Index of where variable radius data item is created

Throws:

NXException

RemoteException

addVariablePointData

int addVariablePointData(Edge edge,
                         String parameter,
                         String radius,
                         String centerValue,
                         String rhoValue,
                         Point smartPoint,
                         boolean isExternal,
                         boolean isArclength)
                  throws NXException,
                         RemoteException

Add an edge blend variable radius data for an edge in the edge blend
License requirements: solid_modeling ("SOLIDS MODELING")
.
Created in NX8.0.0

Parameters:

edge - Edge to add stop short data on

parameter - Parameter location of point on the edge

radius - The radius at this point on the edge.

centerValue - The conic center value at this point on the edge.

rhoValue - The conic rho value at this point on the edge.

smartPoint - Smart Point defining the location of this vr

isExternal - Flag indicating whether this point is external to blend

isArclength - Flag indicating whether parameter is arclength or not

Returns:

Index of where variable radius data item is created

Throws:

NXException

RemoteException

editVariableRadiusData

void editVariableRadiusData(Edge edge,
                            int vrIndex,
                            double parameter,
                            String radius,
                            Point smartPoint,
                            boolean isExternal)
                     throws NXException,
                            RemoteException

Deprecated. Deprecated in NX6.0.0. Use Features.EdgeBlendBuilder#editVariableRadiusDataNew instead.

Edit an edge blend variable radius data for an edge in the edge blend
License requirements: solid_modeling ("SOLIDS MODELING")
.
Created in NX4.0.0

Parameters:

edge - Edge to add stop short data on

vrIndex - Index of what variable radius data item to edit

parameter - Parameter location of point on the edge

radius - The radius at this point on the edge.

smartPoint - Smart Point defining the location of this vr

isExternal - Flag indicating whether this point is external to blend

Throws:

NXException

RemoteException

editVariableRadiusDataNew

void editVariableRadiusDataNew(Edge edge,
                               int vrIndex,
                               String parameter,
                               String radius,
                               Point smartPoint,
                               boolean isExternal)
                        throws NXException,
                               RemoteException

Edit an edge blend variable radius data for an edge in the edge blend
License requirements: solid_modeling ("SOLIDS MODELING")
.
Created in NX6.0.0

Parameters:

edge - Edge to add stop short data on

vrIndex - Index of what variable radius data item to edit

parameter - Parameter location of point on the edge

radius - The radius at this point on the edge.

smartPoint - Smart Point defining the location of this vr

isExternal - Flag indicating whether this point is external to blend

Throws:

NXException

RemoteException

editVariableRadiusDataNew

void editVariableRadiusDataNew(Edge edge,
                               int vrIndex,
                               String parameter,
                               String radius,
                               Point smartPoint,
                               boolean isExternal,
                               boolean isArclength)
                        throws NXException,
                               RemoteException

Edit an edge blend variable radius data for an edge in the edge blend
License requirements: solid_modeling ("SOLIDS MODELING")
.
Created in NX6.0.0

Parameters:

edge - Edge to add stop short data on

vrIndex - Index of what variable radius data item to edit

parameter - Parameter location of point on the edge

radius - The radius at this point on the edge.

smartPoint - Smart Point defining the location of this vr

isExternal - Flag indicating whether this point is external to blend

isArclength - Flag indicating whether the parameter is arclength or not

Throws:

NXException

RemoteException

editVariablePointData

void editVariablePointData(Edge edge,
                           int vrIndex,
                           String parameter,
                           String radius,
                           String centerValue,
                           String rhoValue,
                           Point smartPoint,
                           boolean isExternal,
                           boolean isArclength)
                    throws NXException,
                           RemoteException

Edit an edge blend variable radius data for an edge in the edge blend
License requirements: solid_modeling ("SOLIDS MODELING")
.
Created in NX8.0.0

Parameters:

edge - Edge to add stop short data on

vrIndex - Index of what variable radius data item to edit

parameter - Parameter location of point on the edge

radius - The radius at this point on the edge.

centerValue - The conic center value at this point on the edge.

rhoValue - The conic center value at this point on the edge.

smartPoint - Smart Point defining the location of this vr

isExternal - Flag indicating whether this point is external to blend

isArclength - Flag indicating whether the parameter is arclength or not

Throws:

NXException

RemoteException

removeVariableRadiusData

void removeVariableRadiusData(Edge edge,
                              double parameter)
                       throws NXException,
                              RemoteException

Remove variable radius data on an edge by the parameter value of the point on the edge
License requirements: solid_modeling ("SOLIDS MODELING")
.
Created in NX4.0.0

Parameters:

edge - Edge to add stop short data on

parameter - Parameter location of point on the edge

Throws:

NXException

RemoteException

removeVariableRadiusDataByIndex

void removeVariableRadiusDataByIndex(Edge edge,
                                     int index)
                              throws NXException,
                                     RemoteException

Remove variable radius data on an edge by the index into the point array on the edge
License requirements: solid_modeling ("SOLIDS MODELING")
.
Created in NX4.0.0

Parameters:

edge - Edge to remove variable radius data on

index - Index into point array on the edge

Throws:

NXException

RemoteException

removeVariableRadiusData

void removeVariableRadiusData(Edge edge)
                       throws NXException,
                              RemoteException

Remove all variable radius datas on an edge
License requirements: solid_modeling ("SOLIDS MODELING")
.
Created in NX4.0.0

Parameters:

edge - Edge to remove all variable radius datas from

Throws:

NXException

RemoteException

overlapOption

EdgeBlendBuilder.Overlap overlapOption()
                                throws NXException,
                                       RemoteException

Returns the overlap resolution for edge blend
License requirements: None.

Created in NX4.0.0

Throws:

NXException

RemoteException

setOverlapOption

void setOverlapOption(EdgeBlendBuilder.Overlap overlapOption)
               throws NXException,
                      RemoteException

License requirements: solid_modeling ("SOLIDS MODELING")
.
Created in NX4.0.0

Parameters:

overlapOption -

Throws:

NXException

RemoteException

blendOrder

EdgeBlendBuilder.OrderOfBlending blendOrder()
                                     throws NXException,
                                            RemoteException

Returns the order of blending for edge blend
License requirements: None.

Created in NX4.0.0

Throws:

NXException

RemoteException

setBlendOrder

void setBlendOrder(EdgeBlendBuilder.OrderOfBlending blendOrder)
            throws NXException,
                   RemoteException

License requirements: solid_modeling ("SOLIDS MODELING")
.
Created in NX4.0.0

Parameters:

blendOrder -

Throws:

NXException

RemoteException

setbackOption

EdgeBlendBuilder.Setback setbackOption()
                                throws NXException,
                                       RemoteException

Returns the setback option for edge blend
License requirements: None.

Created in NX4.0.0

Throws:

NXException

RemoteException

setSetbackOption

void setSetbackOption(EdgeBlendBuilder.Setback setbackOption)
               throws NXException,
                      RemoteException

License requirements: solid_modeling ("SOLIDS MODELING")
.
Created in NX4.0.0

Parameters:

setbackOption -

Throws:

NXException

RemoteException

cliffEdges

ScCollector cliffEdges()
                throws NXException,
                       RemoteException

Returns the forced cliff edges for edge blend
License requirements: None.

Created in NX5.0.0

Returns:

The cliff edge collector

Throws:

NXException

RemoteException

setCliffEdges

void setCliffEdges(ScCollector cliffEdgeCollector)
            throws NXException,
                   RemoteException

License requirements: solid_modeling ("SOLIDS MODELING")
.
Created in NX5.0.0

Parameters:

cliffEdgeCollector - The cliff edge collector

Throws:

NXException

RemoteException

nonCliffEdges

ScCollector nonCliffEdges()
                   throws NXException,
                          RemoteException

Returns the prohibited cliff edges for edge blend
License requirements: None.

Created in NX5.0.0

Returns:

The non cliff edge collector

Throws:

NXException

RemoteException

setNonCliffEdges

void setNonCliffEdges(ScCollector nonCliffEdgeCollector)
               throws NXException,
                      RemoteException

License requirements: solid_modeling ("SOLIDS MODELING")
.
Created in NX5.0.0

Parameters:

nonCliffEdgeCollector - The non cliff edge collector

Throws:

NXException

RemoteException

limitsListData

BlendLimitsData limitsListData()
                        throws NXException,
                               RemoteException

Returns the limits list
License requirements: None.

Created in NX5.0.0

Throws:

NXException

RemoteException

trimmingOption

boolean trimmingOption()
                throws NXException,
                       RemoteException

Returns the trimming option
License requirements: None.

Created in NX5.0.0

Throws:

NXException

RemoteException

setTrimmingOption

void setTrimmingOption(boolean optionValue)
                throws NXException,
                       RemoteException

License requirements: solid_modeling ("SOLIDS MODELING")
.
Created in NX5.0.0

Parameters:

optionValue -

Throws:

NXException

RemoteException

segmentBlendFaces

boolean segmentBlendFaces()
                   throws NXException,
                          RemoteException

Returns the Segment blend to match face segments option
License requirements: None.

Created in NX10.0.0

Throws:

NXException

RemoteException

setSegmentBlendFaces

void setSegmentBlendFaces(boolean optionValue)
                   throws NXException,
                          RemoteException

License requirements: solid_modeling ("SOLIDS MODELING")
.
Created in NX10.0.0

Parameters:

optionValue -

Throws:

NXException

RemoteException

blendFaceContinuity

EdgeBlendBuilder.FaceContinuity blendFaceContinuity()
                                             throws NXException,
                                                    RemoteException

Returns the Blend Face Continuity option
License requirements: None.

Created in NX10.0.0

Throws:

NXException

RemoteException

setBlendFaceContinuity

void setBlendFaceContinuity(EdgeBlendBuilder.FaceContinuity optionValue)
                     throws NXException,
                            RemoteException

License requirements: solid_modeling ("SOLIDS MODELING")
.
Created in NX10.0.0

Parameters:

optionValue -

Throws:

NXException

RemoteException

zeroSlopeRadiusFunctionAtChainEnds

boolean zeroSlopeRadiusFunctionAtChainEnds()
                                    throws NXException,
                                           RemoteException

Returns the zero slope radius function at chain ends option
License requirements: None.

Created in NX10.0.1

Throws:

NXException

RemoteException

setZeroSlopeRadiusFunctionAtChainEnds

void setZeroSlopeRadiusFunctionAtChainEnds(boolean optionValue)
                                    throws NXException,
                                           RemoteException

License requirements: solid_modeling ("SOLIDS MODELING")
.
Created in NX10.0.1

Parameters:

optionValue -

Throws:

NXException

RemoteException