Interface | Description |
---|---|
AdaptiveShell |
Represents a adaptive shell feature
To create or edit an instance of this class, use AdaptiveShellBuilder Created in NX6.0.0 |
AdaptiveShellBuilder |
Represents a
AdaptiveShell builder To create a new instance of this class, use FeatureCollection.createAdaptiveShellBuilder(nxopen.features.AdaptiveShell) Default values. |
AddendumSection |
Represents an Addendum Section feature
To create or edit an instance of this class, use AddendumSectionBuilder Created in NX7.5.0 |
AddendumSurface |
Represents an Addendum Surface feature
To create or edit an instance of this class, use AddSurfBuilder Created in NX6.0.0 |
AdmMoveFace |
Represents a ADM Move Face feature
To create or edit an instance of this class, use AdmMoveFaceBuilder Created in NX6.0.0 |
AdmMoveFaceBuilder |
Represents a
AdmMoveFace builder
To create a new instance of this class, use FeatureCollection.createAdmMoveFaceBuilder(nxopen.features.AdmMoveFace) Default values. |
AdmOffsetRegion |
Represents a linear dimension feature
To create or edit an instance of this class, use AdmOffsetRegionBuilder Created in NX6.0.0 |
AdmOffsetRegionBuilder |
Represents a
AdmOffsetRegion builder
To create a new instance of this class, use FeatureCollection.createAdmOffsetRegionBuilder(nxopen.features.AdmOffsetRegion) Default values. |
AdmResizeFace |
Represents an ADM resize face feature
To create or edit an instance of this class, use AdmResizeFaceBuilder Created in NX6.0.0 |
AdmResizeFaceBuilder |
Represents a builder for a resize face feature.
|
AeroCollection |
This class contains the factory method for creating aero design feature builder.
|
AeroFlange |
Represents a flange feature
To create or edit an instance of this class, use AeroFlangeBuilder Created in NX10.0.0 |
AeroFlangeBuilder |
Represents a
AeroFlange builder
To create a new instance of this class, use AeroCollection.createAeroFlangeBuilder(nxopen.features.AeroFlange) Default values. |
AeroRib |
Represents a aero rib feature
To create or edit an instance of this class, use AeroRibBuilder Created in NX10.0.0 |
AeroRibBuilder |
Represents a
AeroRib builder
To create a new instance of this class, use AeroCollection.createAeroRibBuilder(nxopen.features.AeroRib) Default values. |
AestheticFaceBlend |
Represents an aesthetic face blend feature
To create or edit an instance of this class, use AestheticFaceBlendBuilder Created in NX7.5.0 |
AestheticFaceBlendBuilder |
This class will provide ability to create aesthetically pleasing blend surfaces on sheet and solid bodies.
|
AnalyzePocket |
Represents a analyze pocket feature.
|
AnalyzePocketBuilder |
Represents a
AnalyzePocket builder for Analyze Pocket feature. |
AngularDim |
Represents a angular dimension feature
To create or edit an instance of this class, use AngularDimBuilder Created in NX6.0.0 |
AngularDimBuilder |
Represents a
AngularDim builder
To create a new instance of this class, use FeatureCollection.createAngularDimensionBuilder(nxopen.features.AngularDim) Created in NX6.0.0 |
AOCS |
Represents a Offset In Face feature (aka Associative Offset Curve on Surface )
To create or edit an instance of this class, use AOCSBuilder Created in NX4.0.0 |
AOCSBuilder |
Represents a Offset In Face(aka Associative offset curve on face)feature builder.
|
AssemblyCut |
Represents an assembly cut feature.
|
AssemblyCutBuilder |
Represents a
AssemblyCut builder. |
AssociativeArc |
Represents a associative arc feature
To create or edit an instance of this class, use AssociativeArcBuilder Created in NX5.0.0 |
AssociativeArcBuilder |
Represents a
AssociativeArc builder To create a new instance of this class, use BaseFeatureCollection.createAssociativeArcBuilder(nxopen.features.AssociativeArc) Default values. |
AssociativeLine |
Represents a associative line feature
To create or edit an instance of this class, use AssociativeLineBuilder Created in NX5.0.0 |
AssociativeLineBuilder |
Represents a
AssociativeLine builder
To create a new instance of this class, use BaseFeatureCollection.createAssociativeLineBuilder(nxopen.features.AssociativeLine) Default values. |
AutomotiveCollection |
This class contains the factory method for creating automotive feature builder.
|
BaseFeatureCollection | |
Bead |
Represents a Bead feature
To create or edit an instance of this class, use BeadBuilder Created in NX5.0.0 |
Bend |
Represents a Bend feature
To create or edit an instance of this class, use BendBuilder Created in NX5.0.0 |
BendTaper |
Represents a bend taper feature
To create or edit an instance of this class, use BendTaperBuilder Created in NX6.0.0 |
BlendCorner |
Represents a blend corner feature
To create or edit an instance of this class, use BlendCornerBuilder Created in NX9.0.0 |
BlendCornerBuilder |
Represents a
BlendCorner builder. |
BlendPocket |
Represents a blend pocket feature.
|
BlendPocketBuilder |
Represents a
BlendPocket builder for Blend Pocket feature. |
Block |
Represents a block feature.
|
BlockFeatureBuilder |
Represents a block feature builder.
|
BodyFeature |
Represents a feature on a part that has a body associated with it.
|
BooleanBuilder |
Represents a boolean feature builder.
|
BooleanFeature |
Represents a boolean feature.
|
BoundedPlane |
Represents a bounded plane feature
To create or edit an instance of this class, use BoundedPlaneBuilder Created in NX6.0.0 |
BoundedPlaneBuilder |
Represents a
BoundedPlane builder
To create a new instance of this class, use FeatureCollection.createBoundedPlaneBuilder(nxopen.features.BoundedPlane) Created in NX6.0.0 |
BreakCorner |
Represents a BreakCorner feature
To create or edit an instance of this class, use BreakCornerBuilder Created in NX5.0.0 |
Brep |
Represents an unparameterized feature
An unparameterized feature is obtained from an existing feature. |
BridgeCurve |
Represents a bridge curve feature
To create or edit an instance of this class, use BridgeCurveBuilderEx Created in NX5.0.0 |
BridgeCurveBuilder | Deprecated
Deprecated in NX8.5.0.
|
BridgeCurveBuilderEx |
Represents a
BridgeCurve builder. |
BridgeSurface |
Represents a bridge surface feature
To create or edit an instance of this class, use BridgeSurfaceBuilder Created in NX8.0.0 |
BridgeSurfaceBuilder |
Represents a
BridgeSurface builder
To create a new instance of this class, use FeatureCollection.createBridgeSurfaceBuilder(nxopen.features.BridgeSurface) Default values. |
BridgeTransition |
Represents a bridge transition feature
To create or edit an instance of this class, use BridgeTransitionBuilder Created in NX5.0.2 |
Chamfer |
Represents a chamfer feature.
|
ChamferBuilder |
Represents the chamfer builder data.
|
ChangeShellThickness |
Represents a shell face feature
To create or edit an instance of this class, use ChangeShellThicknessBuilder Created in NX6.0.0 |
ChangeShellThicknessBuilder |
Represents a
ChangeShellThickness builder To create a new instance of this class, use FeatureCollection.createChangeShellThicknessBuilder(nxopen.features.ChangeShellThickness) Default values. |
CircularBlendCurve |
Represents a Circular Blend Curve feature
To create or edit an instance of this class, use CircularBlendCurveBuilder Created in NX5.0.0 |
CircularBlendCurveBuilder |
Represents a
CircularBlendCurve builder
To create a new instance of this class, use FeatureCollection.createCircularBlendCurveBuilder(nxopen.features.CircularBlendCurve) Default values. |
ClosedCorner |
Represents a ClosedCorner feature
To create or edit an instance of this class, use ClosedCornerBuilder Created in NX5.0.0 |
Coaxial |
Represents a coaxial feature
To create or edit an instance of this class, use CoaxialBuilder Created in NX6.0.0 |
CoaxialBuilder |
Represents a
Coaxial builder
To create a new instance of this class, use FeatureCollection.createCoaxialBuilder(nxopen.features.Coaxial) Default values. |
ColorFaceBuilder |
Represents a
ColorFaceBuilder
To create a new instance of this class, use FeatureCollection.createColorFaceBuilder() Created in NX7.0.0 |
ColorFeatureBuilder |
Represents a
ColorFeatureBuilder
Represents a color feature builder. |
ColorFeatureGroupBuilder |
Represents a
ColorFeatureGroupBuilder
Represents a color feature group builder. |
CombineBodyFeature |
Represents a boolean feature.
|
CombinedProjection |
Represents a combined projection feature
To create or edit an instance of this class, use CombinedProjectionBuilder Created in NX6.0.0 |
CombinedProjectionBuilder |
Represents a
CombinedProjection builder
To create a new instance of this class, use FeatureCollection.createCombinedProjectionBuilder(nxopen.features.CombinedProjection) Default values. |
CompensateRoughData |
Represents a compensate rough curve or compensate rough sheet feature
To create or edit an instance of this class, use CompensateRoughDataBuilder Created in NX6.0.0 |
CompositeCurve |
Represents a composite curve feature
To create or edit an instance of this class, use CompositeCurveBuilder Created in NX5.0.0 |
CompositeCurveBuilder |
Represents a
CompositeCurve builder. |
ConcaveFaces |
Represents a radius faces feature
To create or edit an instance of this class, use ConcaveFacesBuilder Created in NX7.5.0 |
ConcaveFacesBuilder |
Represents a Concave Faces builder.
|
Cone |
Represents a cone feature
To create or edit an instance of this class, use ConeBuilder Created in NX6.0.0 |
ConeBuilder |
Represents a builder for a cone feature.
|
ConstructionFeatureData |
JA interface for the ConstructionFeatureData object
An instance of this class can be obtained from CustomFeaturePreUpdateEvent.createConstructionFeatureData(nxopen.features.Feature) Created in NX11.0.0 |
ContourFlange |
Represents a Contour Flange feature
To create or edit an instance of this class, use ContourFlangeBuilder Created in NX5.0.0 |
ConvertToSheetmetal |
Represents a ConvertToSheetmetal feature
To create or edit an instance of this class, use ConvertToSheetmetalBuilder Created in NX5.0.0 |
Coplanar |
Represents a Coplanar feature
To create or edit an instance of this class, use CoplanarBuilder Created in NX6.0.0 |
CoplanarBuilder |
Represents a
Coplanar builder
To create a new instance of this class, use FeatureCollection.createCoplanarBuilder(nxopen.features.Feature) Default values. |
CopyFace |
Represents a copy face feature
To create or edit an instance of this class, use CopyFaceBuilder Created in NX6.0.0 |
CopyFaceBuilder |
Represents a builder for a copy face feature.
|
CopyPasteBuilder |
Represents a
CopyPasteBuilder
To create a new instance of this class, use FeatureCollection.createCopyPasteBuilder2(nxopen.NXObject[]) Created in NX6.0.0 |
CurveFeature |
Represents a curve feature
This is an abstract class, and cannot be instantiated. |
CurveFeatureCollection |
Manages curve features.
|
CurveFinderBuilder |
Represents a collection of curves and their relationships to other curves in the model .
|
CurveLength |
Represents a curve length feature.
|
CurveLengthBuilder |
Represents the CurveLength builder
To create a new instance of this class, use FeatureCollection.createCurvelengthBuilder(nxopen.features.Feature) Default values. |
CurveOnSurface |
Represents a curve on surface feature
To create or edit an instance of this class, use CurveOnSurfaceBuilder Created in NX5.0.0 |
CurveOnSurfaceBuilder |
Curve On Surface builder class.
|
CustomAttribute |
Represents a
Features.CustomAttribute class
This is an abstract base class of all the types of attributes. |
CustomAttributeCollection |
This class contains the factory method for creating custom attribute object.
|
CustomDoubleArrayAttribute |
Represents a
Features.CustomDoubleArrayAttribute class
An instance of this class can be obtained from CustomAttributeCollection.createCustomDoubleArrayAttribute(java.lang.String, nxopen.features.CustomAttribute.Property[]) Created in NX11.0.0 |
CustomDoubleAttribute |
Represents a
Features.CustomDoubleAttribute class
An instance of this class can be obtained from CustomAttributeCollection.createCustomDoubleAttribute(java.lang.String, nxopen.features.CustomAttribute.Property[]) Created in NX11.0.0 |
CustomExpressionArrayAttribute |
Represents a
Features.CustomExpressionArrayAttribute class
An instance of this class can be obtained from CustomAttributeCollection.createCustomExpressionArrayAttribute(java.lang.String, nxopen.features.CustomAttribute.Property[]) Created in NX11.0.0 |
CustomExpressionAttribute |
Represents a
Features.CustomExpressionAttribute class
An instance of this class can be obtained from CustomAttributeCollection.createCustomExpressionAttribute(java.lang.String, nxopen.features.CustomAttribute.Property[]) Created in NX11.0.0 |
CustomFeature |
Represents a custom feature
To create or edit an instance of this class, use CustomFeatureBuilder Created in NX10.0.0 |
CustomFeatureBuilder |
Represents a
Features.CustomFeature builder
To create a new instance of this class, use FeatureCollection.createCustomFeatureBuilder(nxopen.features.Feature) Created in NX11.0.0 |
CustomFeatureClass |
JA interface for CustomFeatureClass
This calls cannot be created . |
CustomFeatureClass.CreateFeatureGeometryCallback |
Prototype for create feature geometry callbacks
|
CustomFeatureClass.InformationCallback |
Prototype for information callbacks
|
CustomFeatureClass.InternalFeaturePreUpdateCallback |
Prototype for internal feature pre update callbacks
|
CustomFeatureClass.ModifyFeatureGeometryCallback |
Prototype for modify feature geometry callbacks
|
CustomFeatureClass.PostUpdateCallback |
Prototype for post update callbacks
|
CustomFeatureClass.PreUpdateCallback |
Prototype for pre update callbacks
|
CustomFeatureClassManager |
JA interface for the CustomFeatureClassManager object
To obtain an instance of this class, refer to Session Created in NX11.0.0 |
CustomFeatureCreateFeatureGeometryEvent |
JA interface for the CustomFeatureCreateFeatureGeometryEvent object
This calls cannot be created . |
CustomFeatureData |
JA interface for CustomFeatureData oject
This cannot be created . |
CustomFeatureDataCollection |
This class contains the factory method for creating custom feature data object.
|
CustomFeatureEvent |
JA interface for the CustomFeatureEditEvent on Custom Feature
This calls cannot be created . |
CustomFeatureInformationEvent |
JA interface for the CustomFeatureInformationEvent object
This calls cannot be created . |
CustomFeatureInternalFeaturePreUpdateEvent |
JA interface for the CustomFeatureInternalFeaturePreUpdateEvent object
This calls cannot be created . |
CustomFeatureModifyFeatureGeometryEvent |
JA interface for the CustomFeatureModifyFeatureGeometryEvent object
This calls cannot be created . |
CustomFeaturePostUpdateEvent |
JA interface for the CustomFeaturePostUpdateEvent object
This calls cannot be created . |
CustomFeaturePreUpdateEvent |
JA interface for the CustomFeaturePreUpdateEvent object
This calls cannot be created . |
CustomFeatureSelectionFilter |
Represents a
Features.CustomFeatureSelectionFilter class
An instance of this class can be obtained from CustomFeatureClassManager.createCustomFeatureSelectionFilter() Created in NX11.0.0 |
CustomIntegerArrayAttribute |
Represents a
Features.CustomIntegerArrayAttribute class
An instance of this class can be obtained from CustomAttributeCollection.createCustomIntegerArrayAttribute(java.lang.String, nxopen.features.CustomAttribute.Property[]) Created in NX11.0.0 |
CustomIntegerAttribute |
Represents a
Features.CustomIntegerAttribute class
An instance of this class can be obtained from CustomAttributeCollection.createCustomIntegerAttribute(java.lang.String, nxopen.features.CustomAttribute.Property[]) Created in NX11.0.0 |
CustomLogicalArrayAttribute |
Represents a
Features.CustomLogicalArrayAttribute class
An instance of this class can be obtained from CustomAttributeCollection.createCustomLogicalArrayAttribute(java.lang.String, nxopen.features.CustomAttribute.Property[]) Created in NX11.0.0 |
CustomLogicalAttribute |
Represents a
Features.CustomLogicalAttribute class
An instance of this class can be obtained from CustomAttributeCollection.createCustomLogicalAttribute(java.lang.String, nxopen.features.CustomAttribute.Property[]) Created in NX11.0.0 |
CustomStringArrayAttribute |
Represents a
Features.CustomStringArrayAttribute class
An instance of this class can be obtained from CustomAttributeCollection.createCustomStringArrayAttribute(java.lang.String, nxopen.features.CustomAttribute.Property[]) Created in NX11.0.0 |
CustomStringAttribute |
Represents a
Features.CustomStringAttribute class
An instance of this class can be obtained from CustomAttributeCollection.createCustomStringAttribute(java.lang.String, nxopen.features.CustomAttribute.Property[]) Created in NX11.0.0 |
CustomTagArrayAttribute |
Represents a
Features.CustomTagArrayAttribute class
An instance of this class can be obtained from CustomAttributeCollection.createCustomTagArrayAttribute(java.lang.String, nxopen.features.CustomAttribute.Property[]) Created in NX11.0.0 |
CustomTagAttribute |
Represents a
Features.CustomAttribute class
An instance of this class can be obtained from CustomAttributeCollection.createCustomTagAttribute(java.lang.String, nxopen.features.CustomAttribute.Property[]) Created in NX11.0.0 |
CutFace |
Represents a cut face feature
To create or edit an instance of this class, use CutFaceBuilder Created in NX6.0.0 |
CutFaceBuilder |
Represents a builder for a cut face feature.
|
Cylinder |
Represents a cylinder feature
To create or edit an instance of this class, use CylinderBuilder Created in NX5.0.0 |
CylinderBuilder |
Represents a
Cylinder builder
To create a new instance of this class, use FeatureCollection.createCylinderBuilder(nxopen.features.Feature) Default values. |
DatumAxisBuilder |
Represents a datum axis feature builder.
|
DatumAxisFeature |
Represents a datum axis feature
To create or edit an instance of this class, use DatumAxisBuilder Created in NX3.0.0 |
DatumBuilder |
Represents a builder for datum features.
|
DatumCsys |
Represents a Datum Coordinate System feature.
|
DatumCsysBuilder |
Represents a datum csys builder
To create a new instance of this class, use FeatureCollection.createDatumCsysBuilder(nxopen.features.Feature) Created in NX4.0.0 |
DatumFeature |
Represents a Datum feature that is positioned by a set of constraints.
|
DatumPlaneBuilder |
Represents a datum plane feature builder.
|
DatumPlaneFeature |
Represents a datum plane feature
To create or edit an instance of this class, use DatumPlaneBuilder Created in NX3.0.0 |
DeleteBody |
Represents a delete body feature.
|
DeleteBodyBuilder |
Represents a
DeleteBody builder for Delete Body feature. |
DeleteCurve |
Represents a delete curve feature
To create or edit an instance of this class, use DeleteCurveBuilder Created in NX9.0.0 |
DeleteCurveBuilder |
Represents a
DeleteCurve builder
To create a new instance of this class, use SynchronousCurveCollection.createDeleteCurveBuilder(nxopen.features.DeleteCurve) Default values. |
DeleteEdge |
Represents a delete edge feature
To create or edit an instance of this class, use DeleteEdgeBuilder Created in NX8.0.0 |
DeleteEdgeBuilder |
Represents a builder for a delete edge feature.
|
DeleteFace |
Represents a delete face feature , don't use it until nx502
To create or edit an instance of this class, use DeleteFaceBuilder Created in NX5.0.2 |
DeleteFaceBuilder |
Represents a builder for a delete face feature, don't use it until nx502.
|
DesignFeatureCollection |
Manages design features.
|
DimensionBuilder |
Represents a
DimensionBuilder The sub-class should create an instance of corresponding object Default values. |
Dimple |
Represents a Dimple feature
To create or edit an instance of this class, use DimpleBuilder Created in NX5.0.0 |
DivideCurveBuilder |
Represents a builder for non-associative divide curve operation.
|
Divideface |
Represents a Divideface feature.
|
DividefaceBuilder |
Represents a divide face builder.
|
Draft |
Represents a Draft feature.
|
DraftBody |
Represents a draft body feature
To create or edit an instance of this class, use DraftBodyBuilder Created in NX5.0.0 |
DraftBodyBuilder |
Represents a
DraftBody builder
To create a new instance of this class, use FeatureCollection.createDraftBodyBuilder(nxopen.features.Feature) Default values. |
DraftBuilder |
Represents a Draft Feature Builder that creates or edits a draft (Old name Taper) feature.
|
DraftingSplineBuilder |
Sketch Spline builder class.
|
DrawDiePunch |
Represents a draw die punch feature.
|
DrawnCutout |
Represents a DrawnCutout feature
To create or edit an instance of this class, use DrawnCutoutBuilder Created in NX5.0.0 |
EdgeBlend |
Represents an Edge Blend feature
To create or edit an instance of this class, use EdgeBlendBuilder Created in NX5.0.0 |
EdgeBlendBuilder |
Represents a Edge Blend builder.
|
EdgeRip |
Represents an EdgeRip feature
To create or edit an instance of this class, use EdgeRipBuilder Created in NX5.0.0 |
EdgeSymmetry |
Represents an edge symmetry feature
To create or edit an instance of this class, use EdgeSymmetryBuilder Created in NX7.0.0 |
EdgeSymmetryBuilder |
Represents a
EdgeSymmetry builder
To create a new instance of this class, use FeatureCollection.createEdgeSymmetryBuilder(nxopen.features.Feature) Default values. |
EditBend |
Represents a edit bend feature
To create or edit an instance of this class, use EditBendBuilder Created in NX7.5.0 |
EditCrossSection |
Represents a edit cross section feature.
|
EditCrossSectionBuilder |
Represents a
EditCrossSection builder
To create a new instance of this class, use FeatureCollection.createEditCrossSectionBuilder(nxopen.features.EditCrossSection) Default values. |
EditDimensionBuilder |
Represents a builder of edit feature dimensions
To create a new instance of this class, use FeatureCollection.createEditDimensionBuilder() Default values. |
EmbeddedOperationBuilder |
Represents an EmbeddedOperationBuilder
This is an abstract class, and cannot be instantiated. |
Emboss |
Represents an emboss feature
To create or edit an instance of this class, use EmbossBuilder Created in NX4.0.0 |
EmbossBody |
Represents an emboss body feature
To create or edit an instance of this class, use EmbossBodyBuilder Created in NX8.5.0 |
EmbossBodyBuilder |
Represents a
EmbossBody builder
To create a new instance of this class, use FeatureCollection.createEmbossBodyBuilder(nxopen.features.EmbossBody) Default values. |
EmbossBuilder |
Represents an emboss feature builder that creates or edits an emboss feature.
|
EmbossJoggle |
Represents a joggle object.
|
EmbossLimit |
Represents emboss start and end objects, meaning, targets and end-cap definitions.
|
EmbossProjection |
Represents a projection object.
|
EmbossRegion |
Represents an emboss region object.
|
EmbossSidewall |
Represents an emboss sidewall object.
|
EmbossTaper |
Represents a taper object.
|
EmbossTarget |
Represents a target object.
|
Enlarge |
Represents an enlarge feature
To create or edit an instance of this class, use EnlargeBuilder Created in NX6.0.0 |
EnlargeBuilder |
Represents a
Enlarge builder. |
ExtendSheet |
Represents an extend sheet feature
To create or edit an instance of this class, use ExtendSheetBuilder Created in NX9.0.0 |
ExtendSheetBuilder |
Represents a
ExtendSheet builder
To create a new instance of this class, use TrimFeatureCollection.createExtendSheetBuilder(nxopen.features.ExtendSheet) Default values. |
Extension |
Represents a extension feature
To create or edit an instance of this class, use ExtensionBuilder Created in NX8.0.0 |
ExtensionBuilder |
Represents a
Extension builder
To create a new instance of this class, use FeatureCollection.createExtensionBuilder(nxopen.features.Extension) Default values. |
ExtractFace |
Represents a Extract face feature
To create or edit an instance of this class, use ExtractFaceBuilder Created in NX5.0.0 |
ExtractFaceBuilder |
Represents a
ExtractFace builder. |
Extrude |
Represents an extrude feature.
|
ExtrudeBuilder |
Represents a extrude feature builder.
|
FaceBlend |
Represents a Face Blend feature.
|
FaceBlendBuilder |
Represents a face blend builder.
|
FaceRecognitionBuilder |
Represents a collection of faces and their relationships to other faces in the model .
|
FaceSheet |
Represents a Face Sheet feature
To create or edit an instance of this class, use FaceSheetBuilder Created in NX5.0.0 |
Feature |
Represents a feature on a part
This is an abstract class, and cannot be instantiated. |
FeatureBuilder |
Represents a Feature Builder to be used in the creation and modification of features.
|
FeatureCollection |
Represents a collection of features
To obtain an instance of this class, refer to Part Created in NX3.0.0 |
FeatureGroup |
Represents a
FeatureGroup Not support KF. |
FeatureList |
Represents a list of objects.
|
FeatureReferencesBuilder | |
FeatureReplayBuilder |
Represents a
FeatureReplayBuilder builder. |
FillHole |
Represents a fill hole feature.
|
FillHoleBuilder |
Represents a
FillHole builder
To create a new instance of this class, use FreeformSurfaceCollection.createFillHoleBuilder(nxopen.features.FillHole) Default values. |
FitCurve |
Represents a fit curve feature
To create or edit an instance of this class, use FitCurveBuilder Created in NX8.5.0 |
FitCurveBuilder |
Represents a
FitCurve builder
To create a new instance of this class, use FeatureCollection.createFitCurveBuilder(nxopen.features.FitCurve) Default values. |
FitSurface |
Represents a fit surface feature
To create or edit an instance of this class, use FitSurfaceBuilder Created in NX8.5.0 |
FitSurfaceBuilder |
This class will provide the ability to fit surfaces through facet bodies or point sets/groups.
|
Fixed |
Represents a Fixed feature
To create or edit an instance of this class, use FixedBuilder Created in NX7.0.0 |
FixedBuilder |
Represents a builder for a fixed feature.
|
Flange |
Represents a Flange feature
To create or edit an instance of this class, use FlangeBuilder Created in NX5.0.0 |
FlatPattern |
Represents a Flat Solid feature
To create or edit an instance of this class, use FlatPatternBuilder Created in NX5.0.1 |
FlatSolid |
Represents a Flat Solid feature
To create or edit an instance of this class, use FlatSolidBuilder Created in NX5.0.0 |
FlatteningAndForming |
Represents a flattening and forming feature
To create or edit an instance of this class, use FlatteningAndFormingBuilder Created in NX11.0.0 |
FlatteningAndFormingBuilder |
This class will provide the solution to unwrap 3D non-planar, curved geometry to a 2D plane.
|
FlexibleCable |
Represents a flexible cable
To create or edit an instance of this class, use FlexibleCableBuilder Created in NX7.5.0 |
FlowBlend |
Represents a flow blend feature
To create or edit an instance of this class, use FlowBlendBuilder Created in NX10.0.0 |
FlowBlendBuilder |
Represents a
FlowBlend builder
To create a new instance of this class, use FeatureCollection.createFlowBlendBuilder(nxopen.features.FlowBlend) Default values. |
FreeformCurveCollection |
Collection of freeform curve based features.
|
FreeformSurfaceCollection |
Collection of freeform surface based features.
|
FreeTransformer |
Represents a free transformer feature
To create or edit an instance of this class, use FreeTransformerBuilder Created in NX10.0.0 |
FreeTransformerBuilder |
Represents a
FreeTransformer builder
To create a new instance of this class, use FeatureCollection.createFreeTransformerBuilder(nxopen.features.Feature) Default values. |
GeneralConic |
Represents a general conic feature
To create or edit an instance of this class, use GeneralConicBuilder Created in NX8.5.0 |
GeneralConicBuilder |
Represents a
GeneralConic builder
To create a new instance of this class, use FeatureCollection.createGeneralConicBuilder(nxopen.features.GeneralConic) Default values. |
GeodesicChamfer |
Represents a GeodesicChamfer feature.
|
GeodesicChamferBuilder |
Represents a
GeodesicChamfer builder for GeodesicChamfer command. |
GeodesicFillet |
Represents a GeodesicFillet feature.
|
GeodesicFilletBuilder |
Represents a
GeodesicFillet builder for GeodesicFillet command. |
GeodesicIntersect |
Represents a GeodesicIntersect feature.
|
GeodesicIntersectBuilder |
Represents a
GeodesicIntersect builder for Intersect command. |
GeodesicLine |
Represents a GeodesicLine feature.
|
GeodesicLineBuilder |
Represents a
GeodesicLine builder for GeodesicLine command. |
GeodesicOffset |
Represents a GeodesicOffset feature.
|
GeodesicOffsetBuilder |
Represents a
GeodesicOffset builder for Offset command. |
GeodesicPoint |
Represents a GeodesicPoint feature.
|
GeodesicPointBuilder |
Represents a
GeodesicPoint builder for GeodesicPoint command. |
GeodesicProject |
Represents a GeodesicProject feature.
|
GeodesicProjectBuilder |
Represents a
GeodesicProject builder for Project command. |
GeodesicResetBuilder |
Represents a
GeodesicResetBuilder To create a new instance of this class, use GeodesicSketchCollection.createGeodesicResetBuilder() Created in NX10.0.0 |
GeodesicSketch |
Represents a GeodesicSketch feature.
|
GeodesicSketchBuilder |
Represents a
Features.GeodesicSketch builder for GeodesicSketch feature. |
GeodesicSketchCollection |
Represents a collection of GeodesicSketch features
To obtain an instance of this class, refer to FeatureCollection Created in NX10.0.0 |
GeodesicTrim |
Represents a GeodesicTrim feature.
|
GeodesicTrimBuilder |
Represents a
GeodesicSketch builder for GeodesicTrim command. |
Geomcopy |
Represents a geomcopy feature
To create or edit an instance of this class, use GeomcopyBuilder Created in NX5.0.0 |
GeomcopyBuilder |
Represents a
Geomcopy builder
To create a new instance of this class, use FeatureCollection.createGeomcopyBuilder(nxopen.features.Feature) Default values. |
GeometricConstraintData |
Represents Geometric Constraint Data class.
|
GeometricConstraintDataManager |
Represents Geometric Constraint Data Manager class.
|
GeometricConstraintDataSetManager |
Represents Geometric Constraint Data Set Manager class.
|
GlobalShaping |
Represents a global shaping feature
To create or edit an instance of this class, use GlobalShapingBuilder Created in NX5.0.0 |
GlobalShapingBuilder |
Represents a
GlobalShaping builder
To create a new instance of this class, use FeatureCollection.createGlobalShapingBuilder(nxopen.features.GlobalShaping) Default values. |
GlobalShapingCurveOffsetBuilder |
The class used to define the curves and offset laws needed for the target curve list.
|
GlobalShapingCurveOffsetBuilderList |
Represents a list of objects.
|
GlobalShapingPointOffsetBuilder |
The class used to define the points and offsets needed for the target point list.
|
GlobalShapingPointOffsetBuilderList |
Represents a list of objects.
|
GroupFace |
Represents a group face feature
To create or edit an instance of this class, use GroupFaceBuilder Created in NX6.0.0 |
GroupFaceBuilder |
Represents a builder for a group face feature.
|
GuidedExtensionBuilderEx |
Represents a
GuidedExtensionEx builder
To create a new instance of this class, use FeatureCollection.createGuidedExtensionBuilderEx(nxopen.features.Feature) Default values. |
GuidedExtensionEx |
Represents a guided extension feature
To create or edit an instance of this class, use GuidedExtensionBuilderEx Created in NX10.0.0 |
Gusset |
Represents a gusset feature
To create or edit an instance of this class, use GussetBuilder Created in NX7.5.0 |
Helix |
Represents a helix feature
To create or edit an instance of this class, use HelixBuilder Created in NX8.5.0 |
HelixBuilder |
Represents a
Helix builder
To create a new instance of this class, use FeatureCollection.createHelixBuilder(nxopen.features.Helix) Default values. |
HemFlange |
Represents a hem flange feature
To create or edit an instance of this class, use HemFlangeBuilder Created in NX5.0.0 |
Hole |
Represents a Hole feature
To create or edit an instance of this class, use HoleFeatureBuilder Created in NX3.0.0 |
HoleFeatureBuilder |
Represents a Hole feature builder.
|
HolePackage |
Represents a hole package and hole series feature.
|
HolePackageBuilder |
Represents a
HolePackage builder. |
Human |
Represents a human feature.
|
HumanBuilder |
Represents a human feature.
|
IBoolean | Deprecated
Deprecated in NX4.0.0.
|
IContainerFeature |
Represents a container feature on a part.
|
IForm |
Represents a IForm feature
To create or edit an instance of this class, use IFormBuilder Created in NX7.5.0 |
IFormBuilder |
Represents a
IForm builder. |
IIsolateToolBodyOperation |
Represents a combine body feature.
|
InstanceFeature |
Represents a instance feature
To create or edit an instance of this class, use InstanceFeatureBuilder Created in NX8.0.0 |
InstanceFeatureBuilder |
instance feature builder
To create a new instance of this class, use FeatureCollection.createInstanceFeatureBuilder(nxopen.features.InstanceFeature) Default values. |
Intersect | Deprecated
Deprecated in NX4.0.0.
|
IntersectionCurve |
Represents a
IntersectionCurve . |
IntersectionCurveBuilder |
Represents a
IntersectionCurveBuilder builder. |
IsoclineCurve |
Represents a isocline curve feature
To create or edit an instance of this class, use IsoclineCurveBuilder Created in NX11.0.0 |
IsoclineCurveBuilder |
Represents a
Features.IsoclineCurve builder
To create a new instance of this class, use FreeformCurveCollection.createIsoclineCurveBuilder(nxopen.features.IsoclineCurve) Default values. |
IsolateFeature |
Represents a Isolate Object of feature
To create or edit an instance of this class, use IsolateFeatureBuilder Created in NX8.5.0 |
IsolateFeatureBuilder |
Represents a
IsolateFeature builder To create a new instance of this class, use FeatureCollection.createIsolateFeatureBuilder(nxopen.features.IsolateFeature) Created in NX8.5.0 |
IsoparametricCurves |
Represents a isoparametric curves feature
To create or edit an instance of this class, use IsoparametricCurvesBuilder Created in NX8.0.0 |
IsoparametricCurvesBuilder |
Represents a
IsoparametricCurves builder
To create a new instance of this class, use FeatureCollection.createIsoparametricCurvesBuilder(nxopen.features.IsoparametricCurves) Default values. |
Jog |
Represents a Jog feature
To create or edit an instance of this class, use JogBuilder Created in NX5.0.0 |
JoinCurves |
Represents a join curve feature
To create or edit an instance of this class, use JoinCurvesBuilder Created in NX5.0.0 |
JoinCurvesBuilder |
Represents a
JoinCurves builder. |
LabelChamfer |
Represents a label chamfer feature
To create or edit an instance of this class, use LabelChamferBuilder Created in NX7.0.0 |
LabelChamferBuilder |
Represents a
LabelChamfer builder
To create a new instance of this class, use FeatureCollection.createLabelChamferBuilder(nxopen.features.LabelChamfer) Created in NX7.0.0 |
LabelNotchBlend |
Represents a label notch blend feature
To create or edit an instance of this class, use LabelNotchBlendBuilder Created in NX8.0.0 |
LabelNotchBlendBuilder |
Represents a
LabelNotchBlend builder
To create a new instance of this class, use FeatureCollection.createLabelNotchBlendBuilder(nxopen.features.LabelNotchBlend) Created in NX8.0.0 |
LawCurve |
Represents a law curve feature
To create or edit an instance of this class, use LawCurveBuilder Created in NX7.5.1 |
LawCurveBuilder |
Represents a
LawCurve builder
To create a new instance of this class, use FeatureCollection.createLawCurveBuilder(nxopen.features.LawCurve) Default values. |
LawExtension |
Represents a law extension feature
To create or edit an instance of this class, use LawExtensionBuilder Created in NX6.0.0 |
LawExtensionBuilder |
Represents a
LawExtension builder
To create a new instance of this class, use FeatureCollection.createLawExtensionBuilder(nxopen.features.LawExtension) Default values. |
LawExtensionBuilderEx |
Represents a
LawExtensionEx builder
To create a new instance of this class, use FeatureCollection.createLawExtensionBuilderEx(nxopen.features.Feature) Default values. |
LawExtensionEx |
Represents a law extension feature
To create or edit an instance of this class, use LawExtensionBuilderEx Created in NX8.5.0 |
LinearDimension |
Represents a linear dimension feature
To create or edit an instance of this class, use LinearDimensionBuilder Created in NX6.0.0 |
LinearDimensionBuilder |
Represents a
LinearDimension builder
To create a new instance of this class, use FeatureCollection.createLinearDimensionBuilder(nxopen.features.LinearDimension) Default values. |
LinkedFacet |
Represents a linked facet feature
To create or edit an instance of this class, use LinkedFacetBuilder Created in NX6.0.0 |
LinkedFacetBuilder |
Represents a
LinkedFacet builder
To create a new instance of this class, use FeatureCollection.createLinkedFacetBuilder(nxopen.features.LinkedFacet) Created in NX6.0.0 |
LocalScaleCurve |
Represents a local scale curve feature
To create or edit an instance of this class, use LocalScaleCurveBuilder Created in NX11.0.0 |
LocalScaleCurveBuilder |
Represents a
Features.LocalScaleCurve builder
To create a new instance of this class, use SynchronousCurveCollection.createLocalScaleCurveBuilder(nxopen.features.LocalScaleCurve) Default values. |
LoftedFlange |
Represents a Lofted Flange feature
To create or edit an instance of this class, use LoftedFlangeBuilder Created in NX5.0.0 |
Louver |
Represents a Louver feature
To create or edit an instance of this class, use LouverBuilder Created in NX5.0.0 |
MakeOffset |
Represents a make offset feature
To create or edit an instance of this class, use MakeOffsetBuilder Created in NX7.5.0 |
MakeOffsetBuilder |
Represents a
MakeOffset builder
To create a new instance of this class, use FeatureCollection.createMakeOffsetBuilder(nxopen.features.MakeOffset) Default values. |
MakeSolid |
Represents a make solid feature that converts closed sheet bodies to solid bodies.
|
MakeSolidBuilder |
Represents a
Features.MakeSolid builder. |
Maple |
Represents a maple feature
To create or edit an instance of this class, use MapleBuilder Created in NX7.5.0 |
MapleBuilder |
Represents a
Maple builder
To create a new instance of this class, use FeatureCollection.createMapleBuilder(nxopen.features.Maple) Default values. |
MasterCut |
Represents a section view feature
To create or edit an instance of this class, use MasterCutBuilder Created in NX5.0.0 |
MasterCutBuilder |
Represents a master cut feature builder that creates, inquires, or edits a master cut feature associated with a Cut View.
|
MatchEdge |
Represents a match edge feature
To create or edit an instance of this class, use MatchEdgeBuilder Created in NX6.0.0 |
MatchEdgeBuilder |
Represents a
MatchEdge builder
To create a new instance of this class, use FeatureCollection.createMatchEdgeBuilder(nxopen.features.MatchEdge) Default values. |
MatchedReferenceBuilder | |
MeshSurface |
Represents a mesh surface feature.
|
MeshSurfaceBuilder |
Mesh Surface Builder class.
|
MeshTransformer |
Represents a mesh transformer feature
To create or edit an instance of this class, use MeshTransformerBuilder Created in NX10.0.0 |
MeshTransformerBuilder |
Represents a
MeshTransformer builder
To create a new instance of this class, use FeatureCollection.createMeshTransformerBuilder(nxopen.features.Feature) Default values. |
Metaform |
Represents a metaform feature
To create or edit an instance of this class, use MetaformBuilder Created in NX7.5.0 |
MidSurfaceByFacePairs |
Represents a mid surface by face pairs feature
To create or edit an instance of this class, use MidSurfaceByFacePairsBuilder Created in NX7.5.0 |
MidSurfaceByFacePairsBuilder |
Represents a
MidSurfaceByFacePairs builder
To create a new instance of this class, use FeatureCollection.createMidSurfaceByFacePairsBuilder(nxopen.features.Feature) Default values. |
MidSurfaceFacePair |
Represents a mid surface by face pairs feature
This is an abstract class . |
MidSurfaceUserDefined |
Represents a midsurface user defined feature
To create or edit an instance of this class, use MidSurfaceUserDefinedBuilder Created in NX7.5.0 |
MidSurfaceUserDefinedBuilder |
Represents a
MidSurfaceUserDefined builder
To create a new instance of this class, use FeatureCollection.createMidSurfaceUserDefinedBuilder(nxopen.features.MidSurfaceUserDefined) Default values. |
Mirror |
Represents a mirror feature.
|
MirrorBody |
Represents a mirror body feature.
|
MirrorBodyBuilder |
Represents a
MirrorBody builder. |
MirrorBuilder |
Represents a
Mirror builder. |
MirrorCurve |
Represents a mirror curve feature
To create or edit an instance of this class, use MirrorCurveBuilder Created in NX6.0.0 |
MirrorCurveBuilder |
Represents a
MirrorCurve builder
To create a new instance of this class, use FeatureCollection.createMirrorCurveBuilder(nxopen.features.Feature) Default values. |
MirrorFace |
Represents a Mirror Face feature
To create or edit an instance of this class, use MirrorFaceBuilder Created in NX6.0.0 |
MirrorFaceBuilder |
Represents a
MirrorFace builder
To create a new instance of this class, use FeatureCollection.createMirrorFaceBuilder(nxopen.features.Feature) Default values. |
MirrorFeature |
Represents a mirror feature feature.
|
MirrorFeatureBuilder |
Represents a
MirrorFeature builder
To create a new instance of this class, use FeatureCollection.createMirrorFeatureBuilder(nxopen.features.Feature) Created in NX5.0.0 |
MoveCurve |
Represents a move curve feature
To create or edit an instance of this class, use MoveCurveBuilder Created in NX9.0.0 |
MoveCurveBuilder |
Represents a
MoveCurve builder
To create a new instance of this class, use SynchronousCurveCollection.createMoveCurveBuilder(nxopen.features.MoveCurve) Default values. |
MoveEdge |
Represents a move edge feature
To create or edit an instance of this class, use MoveEdgeBuilder Created in NX9.0.0 |
MoveEdgeBuilder |
Represents a
MoveEdge builder
To create a new instance of this class, use SynchronousEdgeCollection.createMoveEdgeBuilder(nxopen.features.MoveEdge) Default values. |
MoveFace |
Represents a move face feature , don't use it until nx502
To create or edit an instance of this class, use MoveFaceBuilder Created in NX5.0.2 |
MoveFaceBuilder |
Represents a builder for a move face feature, don't use it until nx502.
|
MoveObject |
Represents a Move-Object feature.
|
MoveObjectBuilder |
Represents a
MoveObjectBuilder . |
NormalCutout |
Represents a Normal Cutout feature
To create or edit an instance of this class, use NormalCutoutBuilder Created in NX5.0.0 |
NSidedSurface |
Represents a nsided surface feature
To create or edit an instance of this class, use NSidedSurfaceBuilder Created in NX6.0.0 |
NSidedSurfaceBuilder |
Represents a
NSidedSurface builder
To create a new instance of this class, use FeatureCollection.createNSidedSurfaceBuilder(nxopen.features.NSidedSurface) Default values. |
Offset3DCurve |
Represents a offset 3D curve feature
To create or edit an instance of this class, use Offset3DCurveBuilder Created in NX10.0.0 |
Offset3DCurveBuilder |
Represents a
Features.Offset3DCurveBuilder builder which implements
offset curves along a direction with offset distance in three dimension. |
OffsetCurve |
Represents a offset curve feature
To create or edit an instance of this class, use OffsetCurveBuilder Created in NX5.0.0 |
OffsetCurveBuilder |
Represents a
OffsetCurve builder To create a new instance of this class, use FeatureCollection.createOffsetCurveBuilder(nxopen.features.Feature) Default values. |
OffsetEdge |
Represents a offset edge feature
To create or edit an instance of this class, use OffsetEdgeBuilder Created in NX9.0.0 |
OffsetEdgeBuilder |
Represents a
OffsetEdge builder
To create a new instance of this class, use SynchronousEdgeCollection.createOffsetEdgeBuilder(nxopen.features.OffsetEdge) Created in NX9.0.0 |
OffsetEmboss |
Represents an offset emboss feature
To create or edit an instance of this class, use OffsetEmbossBuilder Created in NX5.0.0 |
OffsetEmbossBuilder |
Represents a builder for an offset emboss feature.
|
OffsetFace |
Represents a offset face feature
To create or edit an instance of this class, use OffsetFaceBuilder Created in NX5.0.0 |
OffsetFaceBuilder |
Represents a
OffsetFace builder
To create a new instance of this class, use FeatureCollection.createOffsetFaceBuilder(nxopen.features.Feature) Default values. |
OffsetMoveCurve |
Represents a offset move curve feature
To create or edit an instance of this class, use OffsetMoveCurveBuilder Created in NX9.0.0 |
OffsetMoveCurveBuilder |
Represents a
OffsetMoveCurve builder
To create a new instance of this class, use SynchronousCurveCollection.createOffsetMoveCurveBuilder(nxopen.features.OffsetMoveCurve) Default values. |
OffsetRegion |
Represents an offset region feature , don't use it until nx502
To create or edit an instance of this class, use OffsetRegionBuilder Created in NX5.0.2 |
OffsetRegionBuilder |
Represents a builder for an offset region feature, don't use it until nx502.
|
OffsetSurface |
Represents a offset surface feature.
|
OffsetSurfaceBuilder |
This class represents a offset surface builder, used for creating or editing an
offset surface feature.
|
OptimizeCurveBuilder |
Represents a builder of optimize curve
To create a new instance of this class, use FeatureCollection.createOptimizeCurveBuilder() Default values. |
OptimizeFace |
Represents a optimize face feature
To create or edit an instance of this class, use OptimizeFaceBuilder Created in NX7.0.0 |
OptimizeFaceBuilder |
Represents a builder of optimize face
To create a new instance of this class, use FeatureCollection.createOptimizeFaceBuilder() Default values. |
OutputFeatureData |
JA interface for the OutputFeatureData object
An instance of this class can be obtained from CustomFeaturePostUpdateEvent.createOutputFeatureData(nxopen.features.Feature) Created in NX11.0.0 |
OvercrownBuilder |
Represents a Overcrown Builder
To create an instance of this this class use Features.FeatureCollection#createOvercrownFeatureBuilder Created in NX4.0.0 |
PaintParametersBuilder |
Represents a paint feature parameters builder.
|
Parallel |
Represents a parallel feature
To create or edit an instance of this class, use ParallelBuilder Created in NX6.0.0 |
ParallelBuilder |
Represents a
Parallel builder. |
PartGeometryCopyBuilder | |
PartGeometryCopySelectBuilder | |
PartGeometryCopySelectBuilderList |
Represents a list of objects.
|
PartModule |
Represents a part module
To create or edit an instance of this class, use PartModuleBuilder Created in NX8.0.0 |
PartModuleBuilder |
Represents a
PartModule builder To create a new instance of this class, use FeatureCollection.createPartModuleBuilder(nxopen.features.PartModule) Created in NX8.0.0 |
PasteFace |
Represents a paste face feature
To create or edit an instance of this class, use PasteFaceBuilder Created in NX6.0.0 |
PasteFaceBuilder |
Represents a builder for a paste face feature.
|
Patch |
Represents a Patch feature
To create or edit an instance of this class, use PatchBuilder Created in NX6.0.1 |
PatchBuilder |
Represents a
PatchBuilder
Lets you use a sheet body to replace some of the faces of a solid body. |
PatchOpenings |
Represents a Patch Openings feature
To create or edit an instance of this class, use PatchOpeningsBuilder Created in NX5.0.0 |
PatchOpeningsBuilder |
Represents a builder for a Patch Openings feature.
|
PatternFace |
Represents a pattern face feature , don't use it until nx502
To create or edit an instance of this class, use PatternFaceBuilder Created in NX5.0.2 |
PatternFaceBuilder |
Represents a builder for a pattern face feature, don't use it until nx502.
|
PatternFaceFeature |
Represents a pattern face feature
To create or edit an instance of this class, use PatternFaceFeatureBuilder Created in NX9.0.0 |
PatternFaceFeatureBuilder |
Represents a builder for a pattern face feature, post NX9.
|
PatternFeature |
Represents a pattern feature
To create or edit an instance of this class, use PatternFeatureBuilder Created in NX7.0.0 |
PatternFeatureBuilder |
Represents a
PatternFeature builder
To create a new instance of this class, use FeatureCollection.createPatternFeatureBuilder(nxopen.features.Feature) Default values. |
PatternGeometry |
Represents a pattern geometry feature.
|
PatternGeometryBuilder |
This class represents the builder to be used to create Pattern Geometry features.
|
Perpendicular |
Represents a perpendicular feature
To create or edit an instance of this class, use PerpendicularBuilder Created in NX6.0.0 |
PerpendicularBuilder |
Represents a
Perpendicular builder
To create a new instance of this class, use FeatureCollection.createPerpendicularBuilder(nxopen.features.Perpendicular) Default values. |
PierceTask |
Represents a Pierce Task feature
To create or edit an instance of this class, use PierceTaskBuilder Created in NX5.0.0 |
PointFeature |
Represents a point feature
To create or edit an instance of this class, use PointFeatureBuilder Created in NX5.0.0 |
PointFeatureBuilder |
Represents a
PointFeatureBuilder builder
To create a new instance of this class, use BaseFeatureCollection.createPointFeatureBuilder(nxopen.features.Feature) Created in NX5.0.0 |
PointSet |
Represents a point set feature
To create or edit an instance of this class, use PointSetBuilder Created in NX6.0.0 |
PointSetBuilder |
Represents a
PointSetBuilder . |
PointSetFacePercentageBuilder |
Represents a
PointSetFacePercentageBuilder . |
PointSetFacePercentageBuilderList |
Represents a list of objects.
|
PoleSmoothing |
Represents a pole smoothing feature
To create or edit an instance of this class, use PoleSmoothingBuilder Created in NX6.0.0 |
PoleSmoothingBuilder |
Represents a
PoleSmoothing builder
To create a new instance of this class, use FeatureCollection.createPoleSmoothingBuilder(nxopen.features.PoleSmoothing) Default values. |
PolylineBuilder |
Polyline builder class.
|
Prebend |
Represents a Prebend feature
To create or edit an instance of this class, use PrebendBuilder Created in NX10.0.0 |
ProjectCurve |
Represents a project curve feature.
|
ProjectCurveBuilder |
Represents a
ProjectCurve builder. |
Promotion |
Represents a promotion feature.
|
PromotionBuilder |
Represents a
Promotion builder. |
PullFace |
Represents a pull face feature
To create or edit an instance of this class, use PullFaceBuilder Created in NX6.0.0 |
PullFaceBuilder |
Represents a
PullFace builder
To create a new instance of this class, use FeatureCollection.createPullFaceBuilder(nxopen.features.PullFace) Default values. |
QuickBinder |
Represents a quick binder feature
To create or edit an instance of this class, use QuickBinderBuilder Created in NX7.5.0 |
RadialDimension |
Represents a radial dimension feature
To create or edit an instance of this class, use RadialDimensionBuilder Created in NX6.0.0 |
RadialDimensionBuilder |
Represents a
RadialDimension builder
To create a new instance of this class, use FeatureCollection.createRadialDimensionBuilder(nxopen.features.RadialDimension) Created in NX6.0.0 |
RapidSurface |
Represents a Rapid Surfacing feature
To create or edit an instance of this class, use RapidSurfaceBuilder Created in NX5.0.0 |
RapidSurfaceBuilder |
Represents a
RapidSurface builder
To create a new instance of this class, use FeatureCollection.createRapidSurfaceBuilder(nxopen.features.RapidSurface) Default values. |
RasterImage |
Represents a Raster Image feature
Not supported by KF at this time . |
Rebend |
Represents a Rebend feature
To create or edit an instance of this class, use RebendBuilder Created in NX5.0.0 |
ReferenceMapperBuilder |
Represents a
ReferenceMapperBuilder
It is used in the context of Boolean Target/Tool Mapping. |
RefitFace |
Represents a refit face feature
To create or edit an instance of this class, use RefitFaceBuilder Created in NX6.0.0 |
RefitFaceBuilder |
Represents a
RefitFace builder
To create a new instance of this class, use FeatureCollection.createRefitFaceBuilder(nxopen.features.RefitFace) Default values. |
RegionListItemBuilder |
Represents a
Features.RegionListItemBuilder builder
To create a new instance of this class, use VarOffsetFaceBuilder.createRegionListItem() Default values. |
RegionListItemBuilderList |
Represents a list of objects.
|
RemoveParametersBuilder |
Represents a
RemoveParametersBuilder . |
ReorderBlends |
Represents a reorder blends feature
To create or edit an instance of this class, use ReorderBlendsBuilder Created in NX7.5.1 |
ReorderBlendsBuilder |
Represents a
ReorderBlends builder
To create a new instance of this class, use FeatureCollection.createReorderBlendsBuilder(nxopen.features.ReorderBlends) Created in NX7.5.1 |
ReplaceBlend |
Represents a replace blend feature
To create or edit an instance of this class, use ReplaceBlendBuilder Created in NX7.0.0 |
ReplaceBlendBuilder |
Represents a builder for a Replace Blend feature.
|
ReplaceFace |
Represents a replace face feature , don't use it until nx502
To create or edit an instance of this class, use ReplaceFaceBuilder Created in NX5.0.2 |
ReplaceFaceBuilder |
Represents a builder for a replace face feature, don't use it until nx502.
|
ReplaceFeatureBuilder |
Represents a replace feature builder.
|
ResizeBendAngle |
Represents a resize bend angle feature
To create or edit an instance of this class, use ResizeBendAngleBuilder Created in NX5.0.0 |
ResizeBendRadius |
Represents a resize bend radius feature
To create or edit an instance of this class, use ResizeBendRadiusBuilder Created in NX5.0.0 |
ResizeBlend |
Represents a resize blend feature , don't use it until nx502
To create or edit an instance of this class, use ResizeBlendBuilder Created in NX5.0.2 |
ResizeBlendBuilder |
Represents a builder for a resize blend feature, don't use it until nx502.
|
ResizeChamfer |
Represents a resize chamfer feature
To create or edit an instance of this class, use ResizeChamferBuilder Created in NX7.0.0 |
ResizeChamferBuilder |
Represents a
ResizeChamfer builder
To create a new instance of this class, use FeatureCollection.createResizeChamferBuilder(nxopen.features.ResizeChamfer) Default values. |
ResizeChamferCurve |
Represents a resize chamfer curve feature
To create or edit an instance of this class, use ResizeChamferCurveBuilder Created in NX10.0.0 |
ResizeChamferCurveBuilder |
Represents a
ResizeChamferCurve builder
To create a new instance of this class, use SynchronousCurveCollection.createResizeChamferCurveBuilder(nxopen.features.ResizeChamferCurve) Created in NX10.0.0 |
ResizeCurve |
Represents a resize curve feature
To create or edit an instance of this class, use ResizeCurveBuilder Created in NX9.0.0 |
ResizeCurveBuilder |
Represents a
ResizeCurve builder
To create a new instance of this class, use SynchronousCurveCollection.createResizeCurveBuilder(nxopen.features.ResizeCurve) Default values. |
ResizeFace |
Represents a resize blend feature , don't use it until nx502
To create or edit an instance of this class, use ResizeFaceBuilder Created in NX5.0.2 |
ResizeFaceBuilder |
Represents a builder for a resize face feature, don't use it until nx502.
|
ResizeNeutralFactor |
Represents a resize neutral factor feature
To create or edit an instance of this class, use ResizeNeutralFactorBuilder Created in NX5.0.0 |
ResizePlane |
Represents a Resize Datum Plane feature
To create or edit an instance of this class, use ResizePlaneBuilder Created in NX6.0.3 |
ResizePlaneBuilder |
Represents a
ResizePlane builder
To create a new instance of this class, use FeatureCollection.createResizePlaneBuilder(nxopen.features.Feature) Created in NX6.0.3 |
Revolve |
Represents a revolve feature.
|
RevolveBuilder |
Represents a revolve builder.
|
Rib |
Represents a rib feature
To create or edit an instance of this class, use RibBuilder Created in NX9.0.0 |
Ribbon |
Represents a ribbon feature
To create or edit an instance of this class, use RibbonBuilder Created in NX6.0.0 |
RibbonBuilder |
Represents a
Ribbon builder
To create a new instance of this class, use FeatureCollection.createRibbonBuilder(nxopen.features.Feature) Default values. |
RibBuilder |
Represents a
Features.Rib builder
To create a new instance of this class, use DesignFeatureCollection.createRibBuilder(nxopen.features.Rib) Default values. |
Rotor |
Represents a Die CAM Rotor feature.
|
RPO |
Represents an RPO dimension
This is an abstract class, and cannot be instantiated . |
RPOBuilder |
Represents a RPO builder.
|
RPODimension |
Represents a RPO Dimension.
|
Ruled |
Represents a ruled feature.
|
RuledBuilder |
Represents a
Ruled builder
To create a new instance of this class, use FeatureCollection.createRuledBuilder(nxopen.features.Feature) Default values. |
Scale |
Represents a scale feature.
|
ScaleBuilder |
Represents a
Scale builder. |
ScaleCurve |
Represents a scale curve feature
To create or edit an instance of this class, use ScaleCurveBuilder Created in NX11.0.0 |
ScaleCurveBuilder |
Represents a
Features.ScaleCurveBuilder builder
To create a new instance of this class, use CurveFeatureCollection.createScaleCurveBuilder(nxopen.features.ScaleCurve) Default values. |
SectionCurve |
Represents a section curves feature.
|
SectionCurveBuilder |
Represents a
SectionCurve builder. |
SectionEdit |
Represents a section edit feature
To create or edit an instance of this class, use SectionEditBuilder Created in NX6.0.0 |
SectionEditBuilder |
Represents a
SectionEdit builder
To create a new instance of this class, use FeatureCollection.createSectionEditBuilder(nxopen.features.SectionEdit) Created in NX6.0.0 |
SectionInertiaAnalysis |
Represents a section inertia analysis feature
To create or edit an instance of this class, use SectionInertiaAnalysisBuilder Created in NX5.0.0 |
SectionInertiaAnalysisBuilder |
Represents a
SectionInertiaAnalysis builder
To create a new instance of this class, use FeatureCollection.createSectionInertiaAnalysisBuilder(nxopen.features.SectionInertiaAnalysis) Default values. |
SectionSurface |
Represents a section surface feature
To create or edit an instance of this class, use SectionSurfaceBuilder Created in NX6.0.0 |
SectionSurfaceBuilder | Deprecated
Deprecated in NX9.0.0.
|
SectionSurfaceBuilderEx |
Represents a
SectionSurface builder. |
SelectDatumCsysList |
Represents a list of objects on a selection list.
|
SelectFeature |
Represents a single object selection.
|
SelectFeatureList |
Represents a list of objects on a selection list.
|
SelectFlatPattern |
Represents a single object selection.
|
SelectPartModule |
Represents a single object selection.
|
ServiceOrientedBodyFeature |
Represents a body feature
To create or edit an instance of this class, use ServiceOrientedBodyFeatureBuilder Created in NX11.0.0 |
ServiceOrientedBodyFeatureBuilder |
Represents a
ServiceOrientedBodyFeature builder
Not support KF. |
ServiceOrientedFeatureCurve |
Represents a curve feature
To create or edit an instance of this class, use ServiceOrientedFeatureCurveBuilder Created in NX11.0.0 |
ServiceOrientedFeatureCurveBuilder |
Represents a
ServiceOrientedFeatureCurve builder
Not support KF. |
Sew |
Represents a sew feature.
|
SewBuilder |
Represents a
Sew builder. |
SheetMetalFromSolid |
Represents a Sheet Metal from Solid feature
To create or edit an instance of this class, use SheetMetalFromSolidBuilder Created in NX6.0.0 |
Shelf |
Represents a shelf feature
To create or edit an instance of this class, use ShelfBuilder Created in NX10.0.0 |
ShelfBuilder |
Represents a
Shelf builder
To create a new instance of this class, use AeroCollection.createShelfBuilder(nxopen.features.Shelf) Default values. |
Shell |
Represents a Shell feature.
|
ShellBuilder |
Represents the Shell feature builder.
|
ShellFace |
Represents a shell face feature
To create or edit an instance of this class, use ShellFaceBuilder Created in NX6.0.0 |
ShellFaceBuilder |
Represents a
ShellFace builder To create a new instance of this class, use FeatureCollection.createShellFaceBuilder(nxopen.features.ShellFace) Default values. |
ShipCollection |
This class contains the factory method for creating ship feature builder.
|
ShowRelatedFacesBuilder |
Represents a builder for a Show Related Faces.
|
SilhouetteFlange |
Represents a silhouette flange feature
To create or edit an instance of this class, use SilhouetteFlangeBuilder Created in NX6.0.0 |
SilhouetteFlangeBuilder |
Represents a
SilhouetteFlange builder
To create a new instance of this class, use FeatureCollection.createSilhouetteFlangeBuilder(nxopen.features.SilhouetteFlange) Default values. |
SketchConversionReport |
Represents a collection of status of conversion of features to independent sketch.
|
SketchConversionStatus |
Represents the status of conversion of features to independent sketch.
|
SketchFeature |
Represents a sketch feature
This is an abstract class, and cannot be instantiated . |
SketchFitCurveBuilder |
Sketch Fit Curve builder class.
|
SketchSplineBuilder |
Sketch Spline builder class.
|
SmoothCurveString |
Represents a smooth section feature
To create or edit an instance of this class, use SmoothCurveStringBuilder Created in NX9.0.0 |
SmoothCurveStringBuilder |
Represents a
Features.SmoothCurveString builder
To create a new instance of this class, use FreeformCurveCollection.createSmoothCurveStringBuilder(nxopen.features.SmoothCurveString) Default values. |
SmoothRangeBuilder |
Represents a
SmoothRangeBuilder builder
To create a new instance of this class, use FlowBlendBuilder.newSmoothRange() Created in NX10.0.0 |
SmoothRangeBuilderList |
Represents a list of objects.
|
SmoothSpline |
Represents a smooth spline feature
To create or edit an instance of this class, use SmoothSplineBuilder Created in NX6.0.0 |
SmoothSplineBuilder |
Represents a
SmoothSpline builder
To create a new instance of this class, use FeatureCollection.createSmoothSplineBuilder(nxopen.features.SmoothSpline) Default values. |
SnipSurface |
Represents a snip surface feature
To create or edit an instance of this class, use SnipSurfaceBuilder Created in NX6.0.0 |
SnipSurfaceBuilder |
Represents a
SnipSurface builder
To create a new instance of this class, use FeatureCollection.createSnipSurfaceBuilder(nxopen.features.SnipSurface) Default values. |
SoftBlend |
Represents a Soft Blend feature.
|
SolidPunch |
Represents a Solid Punch feature
To create or edit an instance of this class, use SolidPunchBuilder Created in NX6.0.2 |
Sphere |
Represents a sphere feature
To create or edit an instance of this class, use SphereBuilder Created in NX6.0.0 |
SphereBuilder |
Represents a
Sphere builder. |
SphericalCorner |
Represents a spherical corner feature
To create or edit an instance of this class, use SphericalCornerBuilder Created in NX8.5.0 |
SphericalCornerBuilder |
Represents a
SphericalCorner builder
To create a new instance of this class, use FeatureCollection.createSphericalCornerBuilder(nxopen.features.SphericalCorner) Default values. |
SpineCurve |
Represents a spine curve feature
To create or edit an instance of this class, use SpineCurveBuilder Created in NX11.0.0 |
SpineCurveBuilder |
Represents a
Features.SpineCurve builder
To create a new instance of this class, use FreeformCurveCollection.createSpineCurveBuilder(nxopen.features.SpineCurve) Default values. |
SplitBody |
Represents a split body feature.
|
SplitBodyBuilder |
Represents a
SplitBody builder. |
Step |
Represents a step feature
To create or edit an instance of this class, use StepBuilder Created in NX10.0.0 |
StepBuilder |
Represents a
Step builder
To create a new instance of this class, use AeroCollection.createStepBuilder(nxopen.features.Step) Default values. |
StudioSpline |
Represents a studio spline feature
To create or edit an instance of this class, use StudioSplineBuilderEx Created in NX5.0.0 |
StudioSplineBuilder | Deprecated
Deprecated in NX8.0.0.
|
StudioSplineBuilderEx |
Studio Spline builder class.
|
StudioSurface |
Represents a studio surface feature
To create or edit an instance of this class, use StudioSurfaceBuilder Created in NX5.0.0 |
StudioSurfaceBuilder |
Represents a
StudioSurface builder
To create a new instance of this class, use FeatureCollection.createStudioSurfaceBuilder(nxopen.features.Feature) Default values. |
StudioXform |
Represents a studio xform feature
To create or edit an instance of this class, use StudioXformBuilderEx Created in NX6.0.0 |
StudioXformBuilder | Deprecated
Deprecated in NX8.5.0.
|
StudioXformBuilderEx |
Represents a
StudioXform builder To create a new instance of this class, use FeatureCollection.createStudioXformBuilderEx(nxopen.features.StudioXform) Default values. |
StyledBlend |
Represents a styled blend feature
To create or edit an instance of this class, use StyledBlendBuilder Created in NX6.0.0 |
StyledBlendBuilder |
Represents a
StyledBlend builder
To create a new instance of this class, use FeatureCollection.createStyledBlendBuilder(nxopen.features.StyledBlend) Default values. |
StyledCorner |
Represents a styled corner feature
To create or edit an instance of this class, use StyledCornerBuilder Created in NX6.0.0 |
StyledCornerBuilder |
Represents a
StyledCorner builder
To create a new instance of this class, use FeatureCollection.createStyledCornerBuilder(nxopen.features.StyledCorner) Default values. |
StyledSweep |
Represents a styled sweep feature
To create or edit an instance of this class, use StyledSweepBuilder Created in NX6.0.0 |
StyledSweepBuilder |
Represents a
StyledSweep builder
To create a new instance of this class, use FeatureCollection.createStyledSweepBuilder(nxopen.features.Feature) Default values. |
Subtract | Deprecated
Deprecated in NX4.0.0.
|
SweepAlongGuide |
Represents a sweep along guide feature
To create or edit an instance of this class, use SweepAlongGuideBuilder Created in NX6.0.0 |
SweepAlongGuideBuilder |
Represents a
SweepAlongGuide builder
To create a new instance of this class, use FeatureCollection.createSweepAlongGuideBuilder(nxopen.features.SweepAlongGuide) Default values. |
SweepFeatureCollection |
Manages sweep-like features.
|
Swept |
Represents a swept feature
To create or edit an instance of this class, use SweptBuilder Created in NX5.0.0 |
SweptBuilder |
Represents a
Swept builder
To create a new instance of this class, use FeatureCollection.createSweptBuilder(nxopen.features.Swept) Default values. |
SweptVolume |
Represents a swept volume feature
To create or edit an instance of this class, use SweptVolumeBuilder Created in NX9.0.0 |
SweptVolumeBuilder |
Represents a
SweptVolume builder
To create a new instance of this class, use SweepFeatureCollection.createSweptVolumeBuilder(nxopen.features.SweptVolume) Default values. |
Symmetric |
Represents a symmetric feature.
|
SymmetricBuilder |
Represents a
Symmetric builder To create a new instance of this class, use FeatureCollection.createSymmetricBuilder(nxopen.features.Symmetric) Default values. |
SynchronousCurveCollection |
This class contains the factory method for creating ST curve builder.
|
SynchronousEdgeCollection |
This class contains the factory method for creating ship feature builder.
|
Tab |
Represents a Tab feature
To create or edit an instance of this class, use TabBuilder Created in NX5.0.0 |
TabNoteCfgBuilder | |
Tangent |
Represents a tangent feature
To create or edit an instance of this class, use TangentBuilder Created in NX6.0.0 |
TangentBuilder |
Represents a
Tangent builder
To create a new instance of this class, use FeatureCollection.createTangentBuilder(nxopen.features.Tangent) Default values. |
Text |
Represents a text feature
To create or edit an instance of this class, use TextBuilder Created in NX7.5.1 |
TextBuilder |
Represents a
Text builder
To create a new instance of this class, use FeatureCollection.createTextBuilder(nxopen.features.Text) Default values. |
Thicken |
Represents a thicken feature.
|
ThickenBuilder |
Represents a builder for a
Thicken feature. |
ThreeBendCorner |
Represents a ThreeBendCorner feature
To create or edit an instance of this class, use ThreeBendCornerBuilder Created in NX5.0.0 |
ThroughCurveMesh |
Represents a through curve mesh feature.
|
ThroughCurveMeshBuilder |
Represents a
ThroughCurveMesh builder. |
ThroughCurves |
Represents a Through Curves feature.
|
ThroughCurvesBuilder |
Represents a
ThroughCurves builder. |
ToolingBox |
Represents a tooling box feature
To create or edit an instance of this class, use ToolingBoxBuilder Created in NX10.0.0 |
ToolingBoxBuilder |
Represents a
ToolingBox builder
To create a new instance of this class, use ToolingFeatureCollection.createToolingBoxBuilder(nxopen.features.ToolingBox) Default values. |
ToolingCollection |
This class contains the factory method for creating tooling feature builder.
|
ToolingFeatureCollection |
This class contains the factory method for creating tooling feature builder.
|
TrackingData |
JA interface for Tracking Data
An instance of this class can be obtained from CustomFeatureCreateFeatureGeometryEvent.createTrackingDataForParasolidEntity(int) or CustomFeatureCreateFeatureGeometryEvent.createTrackingDataForNXObject(nxopen.TaggedObject) or CustomFeatureModifyFeatureGeometryEvent.createTrackingDataForNXObject(nxopen.TaggedObject) Created in NX11.0.0 |
TrimAndExtend |
Represents a trim and extend feature
To create or edit an instance of this class, use TrimAndExtendBuilder Created in NX9.0.0 |
TrimAndExtendBuilder |
Represents a
TrimAndExtend builder
To create a new instance of this class, use TrimFeatureCollection.createTrimAndExtendBuilder(nxopen.features.TrimAndExtend) Default values. |
TrimBody |
Represents a Trim Body feature.
|
TrimBody2 |
Represents a trim body feature.
|
TrimBody2Builder |
Represents a
TrimBody2 builder for Trim Body
feature. |
TrimBodyBuilder |
Represents the trim body feature builder.
|
TrimCornerBuilder |
Represents a builder for non-associative trim corner operation.
|
TrimCurve |
Represents a trim curve feature
To create or edit an instance of this class, use TrimCurveBuilder Created in NX5.0.0 |
TrimCurveBuilder |
Represents a
TrimCurve builder
To create a new instance of this class, use FeatureCollection.createTrimCurveBuilder(nxopen.features.TrimCurve) Default values. |
TrimExtend |
Represents a trim extend feature.
|
TrimExtendBuilder |
Represents a
TrimExtend builder. |
TrimFeatureCollection |
Manages design features.
|
TrimLineDevelopment |
Represents a trim line development feature
To create or edit an instance of this class, use TrimLineDevelopmentBuilder Created in NX6.0.0 |
TrimSheet |
Represents a trim sheet feature.
|
TrimSheetBuilder |
Represents a
TrimSheet builder. |
Tube |
Represents a tube feature
To create or edit an instance of this class, use TubeBuilder Created in NX5.0.0 |
TubeBuilder |
Represents a
Tube builder
To create a new instance of this class, use FeatureCollection.createTubeBuilder(nxopen.features.Feature) Default values. |
Unbend |
Represents a Unbend feature
To create or edit an instance of this class, use UnbendBuilder Created in NX5.0.0 |
Unite | Deprecated
Deprecated in NX4.0.0.
|
UniversalUnform |
Represents a UniversalUnform feature
To create or edit an instance of this class, use UniversalUnformBuilder Created in NX8.5.0 |
Unsew |
Represents a Unsew feature
To create or edit an instance of this class, use UnsewBuilder Created in NX5.0.0 |
UnsewBuilder |
Represents a
Unsew builder
To create a new instance of this class, use FeatureCollection.createUnsewBuilder(nxopen.features.Unsew) Default values. |
Untrim |
Represents a Untrim feature.
|
UntrimBuilder |
Represents a
Untrim builder
To create a new instance of this class, use FeatureCollection.createUntrimBuilder(nxopen.features.Feature) Created in NX5.0.0 |
UserDefinedFeatureApplicationData |
JA interface for UserDefinedFeatureApplicationData object .
|
UserDefinedFeatureApplicationField |
JA interface for UserDefinedFeatureApplicationField object .
|
UserDefinedFeatureClass |
JA interface for UserDefinedFeatureClass
An instance of this class can be obtained from Features.UserDefinedFeatureClassManager#createClass Created in NX8.0.0 |
UserDefinedFeatureClass.CopyCallback |
Prototype for copy callbacks
|
UserDefinedFeatureClass.CreateCallback |
Prototype for create callbacks
|
UserDefinedFeatureClass.EditCallback |
Prototype for edit callbacks
|
UserDefinedFeatureClass.IconCallback |
Prototype for icon callbacks
|
UserDefinedFeatureClass.UpdateCallback |
Prototype for update callbacks
|
UserDefinedFeatureClassManager |
JA interface for the UserDefinedFeatureClassManager object
To obtain an instance of this class, refer to Session Created in NX8.0.0 |
UserDefinedFeatureCopyEvent |
JA interface for the UserDefinedFeatureCopyEvent object
This calls cannot be created . |
UserDefinedFeatureCreateEvent |
JA interface for the UserDefinedFeatureCreateEvent object
This calls cannot be created . |
UserDefinedFeatureEditEvent |
JA interface for the UserDefinedFeatureEditEvent object
This calls cannot be created . |
UserDefinedFeatureExpressionData |
JA interface for UserDefinedFeatureExpressionData object.
|
UserDefinedFeatureIconEvent |
JA interface for the UserDefinedFeatureIconEvent object
This calls cannot be created . |
UserDefinedFeatureReferenceData |
JA interface for UserDefinedFeatureReference object.
|
UserDefinedFeatureUpdateEvent |
JA interface for the UserDefinedFeatureUpdateEvent object
This calls cannot be created . |
UserDefinedObjectFeature |
Represents a User Defined Object feature.
|
UserDefinedObjectFeatureBuilder |
Represents a user defined object feature builder.
|
VariableOffset |
Represents a variable offset feature
To create or edit an instance of this class, use VariableOffsetBuilder Created in NX8.0.0 |
VariableOffsetBuilder |
Represents a
VariableOffset builder
To create a new instance of this class, use FeatureCollection.createVariableOffsetBuilder(nxopen.features.VariableOffset) Default values. |
VariableRadiusPointsBuilder |
Represents a
VariableRadiusPointsBuilder builder
To create a new instance of this class, use FlowBlendBuilder.newControlPoint() Created in NX10.0.0 |
VariableRadiusPointsBuilderList |
Represents a list of objects.
|
VarOffsetFace |
Represents a var offset face feature
To create or edit an instance of this class, use VarOffsetFaceBuilder Created in NX11.0.0 |
VarOffsetFaceBuilder |
Represents a
Features.VarOffsetFace builder
To create a new instance of this class, use FeatureCollection.createVarOffsetFaceBuilder(nxopen.features.VarOffsetFace) Default values. |
Varsweep |
Represents a Varsweep feature.
|
VarsweepBuilder |
Represents a Variational Sweep feature builder.
|
VehicleDesignCollection |
This class contains the factory method for creating vehicle design feature builder.
|
VirtualBlendEdgeBuilder |
Represents a
VirtualBlendEdgeBuilder To create a new instance of this class, use FeatureCollection.createVirtualBlendEdgeBuilder() Created in NX7.0.1 |
VirtualCurve |
Represents a virtual curve feature
To create or edit an instance of this class, use VirtualCurveBuilder Created in NX7.5.0 |
VirtualCurveBuilder |
Represents a
VirtualCurve builder
To create a new instance of this class, use FeatureCollection.createVirtualCurveBuilder(nxopen.features.VirtualCurve) Default values. |
WaveDatum |
Represents a WAVEDATUM feature
To create or edit an instance of this class, use WaveDatumBuilder Created in NX5.0.0 |
WaveDatumBuilder |
Represents a Wave Datum builder.
|
WaveInterfaceLinkerBuilder |
Represents a WaveInterfacelinker Feature builder
To create a new instance of this class, use BaseFeatureCollection.createWaveInterfaceLinkerBuilder(nxopen.features.Feature) Default values. |
WaveLink |
Represents a wavelink feature.
|
WaveLinkBuilder |
Represents a Wavelink Feature builder.
|
WavePoint |
Represents a wavepoint feature
To create or edit an instance of this class, use WavePointBuilder Created in NX5.0.0 |
WavePointBuilder |
Represents a
Features.Feature builder
To create a new instance of this class, use FeatureCollection.createWavePointBuilder(nxopen.features.Feature) Default values. |
WaveRouting |
Represents a waverouting feature
To create or edit an instance of this class, use WaveRoutingBuilder Created in NX5.0.0 |
WaveRoutingBuilder |
Represents a
WaveRoutingBuilder
To create a new instance of this class, use FeatureCollection.createWaveRoutingBuilder(nxopen.features.Feature) Default values. |
WaveSketch |
Represents a WAVESKETCH feature
To create or edit an instance of this class, use WaveSketchBuilder Created in NX5.0.1 |
WaveSketchBuilder |
Represents a WaveSketchBuilder.
|
WrapBuilder |
Represents a
WrapUnwrap builder. |
WrapGeometry |
Represents a wrap geometry feature
To create or edit an instance of this class, use WrapGeometryBuilder Created in NX6.0.0 |
WrapGeometryBuilder |
Represents a
WrapGeometry builder
To create a new instance of this class, use FeatureCollection.createWrapGeometryBuilder(nxopen.features.WrapGeometry) Default values. |
WrapUnwrap |
Represents a wrap or unwrap curve feature
To create or edit an instance of this class, use WrapBuilder Created in NX6.0.0 |
Class | Description |
---|---|
AdmMoveFaceBuilder.MoveOptionType |
Represents the move option.
|
AeroFlangeBuilder.GuideObjectTypes |
This attribute represents the Guide Object types
|
AeroFlangeBuilder.LimitObjectTypes |
This attribute represents the limit object types
|
AeroFlangeBuilder.PointOption |
This attribute represents the options for on path dimension
|
AeroFlangeBuilder.ThicknessDimensionOptions |
This attribute represents the options for thickness dimension
|
AeroFlangeBuilder.WidthDimensionOptions |
This attribute represents the options for width dimension
|
AeroFlangeBuilder.WidthMethods |
This attribute represents the width method
|
AeroRibBuilder.GuideObjectTypes |
This attribute represents the Guide Object types
|
AeroRibBuilder.HeightDimensionOptions |
This attribute represents the options for height dimension
|
AeroRibBuilder.LimitObjectTypes |
This attribute represents the limit object types
|
AeroRibBuilder.PointOption |
This attribute represents the options for on path dimension
|
AeroRibBuilder.RibForms |
This attribute represents the Rib Form
|
AeroRibBuilder.ThicknessDimensionOptions |
This attribute represents the options for thickness dimension
|
AestheticFaceBlendBuilder.AlignmentType |
Alignment method provides the ability to align the cross sections of the blend in the user specified direction
|
AestheticFaceBlendBuilder.BlendFacesType |
Trimming options
|
AestheticFaceBlendBuilder.BlendType |
Tangent method will create tangent lines based on the method employed.
|
AestheticFaceBlendBuilder.CenterType |
Center methods will define peak of the blend
|
AestheticFaceBlendBuilder.EndTrimObjectType |
End object overriding trim options
|
AestheticFaceBlendBuilder.RhoType |
Rho options
|
AestheticFaceBlendBuilder.SegmentationType |
Segmentations options
|
AestheticFaceBlendBuilder.ShapeType |
Shape methods will define the high level shape of the blend cross section.
|
AestheticFaceBlendBuilder.StartTrimObjectType |
Start object overriding trim options
|
AnalyzePocketBuilder.AngledWallSolutions |
Represents the solution which defines how the End Mill is positioned with the angled walls.
|
AnalyzePocketBuilder.ToolTypes |
Represents the tool type which defines how the angled walls are cut.
|
AOCSBuilder.Extend |
AOCS builder extend to each other within section type enum.
|
AOCSBuilder.ExtendToFace |
AOCS builder extend to face edges type enum.
|
AOCSBuilder.FilletOptions |
AOCS builder fillet options type enum.
|
AOCSBuilder.OffsetDirection |
AOCS builder offset direction type enum.
|
AOCSBuilder.OffsetDistanceType |
AOCS builder offset distance type enum.
|
AOCSBuilder.OffsetType |
AOCS builder offset type enum.
|
AOCSBuilder.Trim |
AOCS builder trim to each other within section type enum.
|
AssociativeArcBuilder.CenterReference |
Represents references for center point
|
AssociativeArcBuilder.EndOption |
Represents end point options type
|
AssociativeArcBuilder.EndReference |
Represents references for end point
|
AssociativeArcBuilder.MidOption |
Represents mid point options type
|
AssociativeArcBuilder.MidReference |
Represents references for mid point
|
AssociativeArcBuilder.StartOption |
Represents start point options type
|
AssociativeArcBuilder.StartReference |
Represents references for start point
|
AssociativeArcBuilder.Types |
Represents arc type.
|
AssociativeLineBuilder.EndOption |
Represents end options type.
|
AssociativeLineBuilder.EndReference |
Represents references for end point
|
AssociativeLineBuilder.StartOption |
Represents start options type.
|
AssociativeLineBuilder.StartReference |
Represents references for start point
|
AssociativityType |
Represents the associativity type for a dimension entity
|
BlendCornerBuilder.ContinuityTypes |
Continuity options
|
BlendPocketBuilder.AngledWallSolutions |
Represents the solution which defines how the End Mill is positioned with the angled walls.
|
BlendPocketBuilder.ToolTypes |
Represents the tool type which defines how the angled walls are cut.
|
BlockFeatureBuilder.OrientationData |
This class holds the data returned from
BlockFeatureBuilder.getOrientation() |
BlockFeatureBuilder.Types |
Represents the block types
|
BridgeCurveBuilder.ConstraintTypes |
This enum represents the end continuity constraint types for the bridge curve
|
BridgeCurveBuilder.CurveDirectionTypes |
This enum represents the direction type for input curves
|
BridgeCurveBuilder.CurveFitTypes |
This enum represents the curve fit types for the bridge curve
|
BridgeCurveBuilder.EndObjectTypes |
This enum represents the current selected end object types for the bridge curve
|
BridgeCurveBuilder.MinRadiusTypes |
This enum represents the minimum radius types for the bridge curve
|
BridgeCurveBuilder.SelectedObject |
This enum represents the current selected object for the bridge curve
|
BridgeCurveBuilder.ShapeControlTypes |
This enum represents the shape control types for the bridge curve
|
BridgeCurveBuilder.SurfaceDirectionTypes |
This enum represents the direction type for input surfaces
|
BridgeCurveBuilderEx.EndObjectTypes |
End object type
|
BridgeCurveBuilderEx.RadiusConstraintMethods |
Radius constraint methods
|
BridgeCurveBuilderEx.ShapeControlMethods |
Shape control methods
|
BridgeCurveBuilderEx.StartObjectTypes |
Start object type
|
ChamferBuilder.ChamferOption |
This enum represents the chamfer parameter options
|
ChamferBuilder.OffsetMethod |
This enum represents the offset method options
|
CircularBlendCurveBuilder.CylinderDirectionOption |
Represents the cylinder direction options
|
CircularBlendCurveBuilder.CylinderRadiusOption |
Represents the cylinder radius options
|
ColorFeatureBuilder.OperationType |
specify color or remove color type
|
ColorFeatureGroupBuilder.OperationType |
specify color or remove color type
|
ColorFeatureGroupBuilder.ProcessType |
set color for new features only or set color and apply to all members
|
CompositeCurveBuilder.JoinMethod |
the join method
|
CompositeCurveBuilder.PartType |
Composite Curve part type.
|
CompositeCurveBuilder.WaveLinkInformationData |
This class holds the data returned from
CompositeCurveBuilder.getWaveLinkInformation() |
ConcaveFacesBuilder.CalculatePointCurvatureData |
This class holds the data returned from
ConcaveFacesBuilder.calculatePointCurvature(nxopen.Face, nxopen.Point3d) |
ConeBuilder.Types |
Represents the Cone type
|
CopyPasteBuilder.BuilderVersion |
Types of version number
|
CopyPasteBuilder.ExpressionTransferOption |
Types of expression transfer mode
|
CopyPasteBuilder.ParentSelectOption |
Types of parent select option; Specifying smart object or selecting input for original parent
|
CopyPasteBuilder.ParentTransferOption |
Types of parent transfer mode
|
CustomAttribute.Property |
Specifies custom attribute type.
|
CustomAttribute.Type |
Specifies custom attribute type.
|
CustomFeatureCreateFeatureGeometryEvent.CopyNXBodyData |
This class holds the data returned from
CustomFeatureCreateFeatureGeometryEvent.copyNXBody(nxopen.Body) |
CustomFeatureData.AllCustomAttributeNameAndTypesData |
This class holds the data returned from
CustomFeatureData.getAllCustomAttributeNameAndTypes() |
CylinderBuilder.Types |
the cylinder types
|
DatumAxisBuilder.AlternateSolution |
Specifies the alternate solution for datum axis using point on curve method only
|
DatumAxisBuilder.ConstraintType |
Specifies different constraint types for selected geometries
|
DatumAxisBuilder.CurveOption |
Specifies the distance on the curve as absolute distance or relative distance as percentage
|
DatumAxisBuilder.CurveOrientations |
Available orientations that the user can choose when the Datum Axis type is On Curve Vector
|
DatumAxisBuilder.DirectionOrientations |
Two available direction orientations that the user can choose when the Datum Axis type is Point and Direction
|
DatumAxisBuilder.FixedType |
Specifies the fixed type datum axis going thru only one specific axis or thru all axes.
|
DatumAxisBuilder.Types |
New Datum Axis types in NX5
|
DatumAxisBuilder.UseArcLength |
Specifies points for which arclength is to be used.
|
DatumCsysBuilder.WaveLinkInformationData |
This class holds the data returned from
DatumCsysBuilder.getWaveLinkInformation() |
DatumPlaneBuilder.AlternateSolution |
Specifies the alternate solution for a datum plane using point on curve method
|
DatumPlaneBuilder.ConstraintType |
Specifies different constraint types of selected geometries
|
DatumPlaneBuilder.CurveOption |
Specifies the distance on the curve as absolute distance or relative distance as percentage
|
DatumPlaneBuilder.FixedType |
Specifies the fixed type datum plane going thru only one specific plane or thru all planes
|
DatumPlaneBuilder.UseArcLength |
Specifies points for which arclength is to be used.
|
DeleteFaceBuilder.CapOptionValues |
Represents the cap option values.
|
DeleteFaceBuilder.FaceEdgeBlendPreferenceOptions |
Represents the face edge blend preference options.
|
DeleteFaceBuilder.SelectTypes |
Enumeration of select type, don't use it until nx502 .
|
DeleteFaceBuilder.SetbackOptions |
Represents the set back options.
|
DivideCurveBuilder.CornerOption |
Represents the Divide Curve at Corner option types
|
DivideCurveBuilder.EqualSegmentOption |
Represents the Divide Curve equal segment method types
|
DivideCurveBuilder.InputArcLengthDirectionFlag |
Represents the Divide Curve Input Arc length direction flag
|
DivideCurveBuilder.KnotPointOption |
Represents the Divide Curve at Knot option types
|
DivideCurveBuilder.Types |
Represents the Divide Curve types
|
DraftBodyBuilder.MatchingScope |
Describes the different match scopes.
|
DraftBodyBuilder.MatchingType |
Describes the different match types
|
DraftBodyBuilder.MatchOption |
Describes the different match options.
|
DraftBodyBuilder.Method |
Describes the Draft Body method as true draft or isocline draft.
|
DraftBodyBuilder.RepairingPartingEdgeOption |
Describes the different repair parting edges options.
|
DraftBodyBuilder.RepairOption |
Describes the different repair options.
|
DraftBodyBuilder.Types |
Describes the different Draft Body types
|
DraftBuilder.DraftReferencesMethods |
Describes the different Draft Methods in Draft References
|
DraftBuilder.Method |
Describes the Draft type as true draft or isocline draft.
|
DraftBuilder.Type |
Describes the different Draft types
|
EdgeBlendBuilder.ChainsetAndSectionValueData |
This class holds the data returned from
EdgeBlendBuilder.getChainsetAndSectionValue(int) |
EdgeBlendBuilder.ChainsetAndStatusData |
This class holds the data returned from
EdgeBlendBuilder.getChainsetAndStatus(int) |
EdgeBlendBuilder.ChainsetData |
This class holds the data returned from
EdgeBlendBuilder.getChainset(int) |
EdgeBlendBuilder.Conic |
This enum represents the Conic option
|
EdgeBlendBuilder.FaceContinuity |
The Blend Face Continuity
|
EdgeBlendBuilder.OrderOfBlending |
This enum represents the order of Blending
|
EdgeBlendBuilder.Overlap |
This enum represents the Overlap resolution options for Edge Blend
|
EdgeBlendBuilder.Rhotype |
This enum represents the rho type for conic section blend
|
EdgeBlendBuilder.Section |
This enum represents the Section option
|
EdgeBlendBuilder.Setback |
This enum represents the Setback option
|
EdgeBlendBuilder.SetbackData |
This class holds the data returned from
EdgeBlendBuilder.getSetbackData(int) |
EdgeBlendBuilder.StopshortData |
This class holds the data returned from
EdgeBlendBuilder.getStopshortData(int) |
EdgeBlendBuilder.VariableRadiusData |
This class holds the data returned from
EdgeBlendBuilder.getVariableRadiusData(nxopen.Edge) |
EdgeBlendBuilder.VariableRadiusDataNewData |
This class holds the data returned from
EdgeBlendBuilder.getVariableRadiusDataNew(nxopen.Edge) |
EdgeSymmetryBuilder.MovementDirections |
Movement directions
|
EdgeSymmetryBuilder.MovementMethods |
Matching method options
|
EdgeSymmetryBuilder.SymmetryPlaneOptions |
Symmetry plane options
|
EmbossJoggle.JoggleDirectionMethod |
Describes the option that joggle direction along.
|
EmbossLimit.EndcapMethod |
Describes the method that can be applied to the selected geometry to define the End-Cap.
|
EmbossLimit.EndcapSourceOption |
Describes the geometry that is used to create the End-Cap face/body.
|
EmbossProjection.ProjectionOption |
Describes the geometry for projection
|
EmbossRegion.ConvexityOption |
Describes whether the emboss geometry is above the target("Pad") or below the target("Pocket"), or both("Mixed").
|
EmbossSidewall.SidewallMethod |
Describes the method that can be applied to define the sidewall.
|
EnlargeBuilder.ExtensionTypes |
Extension types
|
ExtendSheetBuilder.BodyOutput |
Creates extension as an existing or a new entity
|
ExtendSheetBuilder.Limit |
Determines the Limit type for extension
|
ExtendSheetBuilder.SideEdgeShape |
Determines the path of the extension
|
ExtendSheetBuilder.SurfaceShape |
Determines the surface type of the extension
|
ExtensionBuilder.Distance |
The distance type.
|
ExtensionBuilder.Extension |
The extension method.
|
ExtensionBuilder.Types |
The part of the face to extend.
|
ExtractFaceBuilder.ExtractType |
enum for feature type being extracted
|
ExtractFaceBuilder.FaceOptionType |
enum for face option type
|
ExtractFaceBuilder.FaceSurfaceType |
type of resulting surface
|
ExtractFaceBuilder.FeatureOptionType |
enum for feature option type
|
ExtractFaceBuilder.ParentPartType |
enum for scope of part
|
ExtractFaceBuilder.WaveLinkInformationData |
This class holds the data returned from
ExtractFaceBuilder.getWaveLinkInformation() |
FaceBlendBuilder.CrossSectionOption |
This enum represents the Cross section types
|
FaceBlendBuilder.DefiningType |
This enum represents the Face Blend defining type, it is added in NX75 for new three face blend
|
FaceBlendBuilder.LimitPlanesData |
This class holds the data returned from
FaceBlendBuilder.getLimitPlanes() |
FaceBlendBuilder.OverflowMethod |
This enum represents the overflow options
|
FaceBlendBuilder.RhoMethod |
This enum represents the rho types
|
FaceBlendBuilder.TrimmingMethod |
This enum represents the Trimming options for Face Blend
|
FaceBlendBuilder.Type |
This enum represents the Face Blend types
|
FaceBlendBuilder.WidthMethod |
This enum represents the Face Blend width method, it is added in NX10 for two face blend
|
Feature.BooleanType |
Boolean operation type.
|
Feature.DiagnosticType |
Diagnostic type
|
FeatureCollection.CreateIntersectFeatureData |
This class holds the data returned from
FeatureCollection.createIntersectFeature(nxopen.Body, boolean, nxopen.Body[], boolean, boolean) |
FeatureCollection.CreateSubtractFeatureData |
This class holds the data returned from
FeatureCollection.createSubtractFeature(nxopen.Body, boolean, nxopen.Body[], boolean, boolean) |
FeatureCollection.CreateUniteFeatureData |
This class holds the data returned from
FeatureCollection.createUniteFeature(nxopen.Body, boolean, nxopen.Body[], boolean, boolean) |
FeatureCollection.ReorderType |
Reorder operation type.
|
FeatureGroup.Type |
Feature group type.
|
FillHoleBuilder.BorderContinuity |
Represents continuity value at a border curve.
|
FillHoleBuilder.ContinuityTypes |
border continuity connects border object with the surface continuity
|
FillHoleBuilder.ShapeControlTypes |
type of the shape control
|
FitCurveBuilder.FittingParametersOptions |
Fitting parameters options
|
FitCurveBuilder.ProjectionDirectionOptions |
Auxiliary curve projection direction options
|
FitCurveBuilder.TargetSourceTypes |
Fitting target types
|
FitCurveBuilder.Types |
Fitting types
|
FitSurfaceBuilder.DirectionType |
Direction method provides the ability to specify the projection direction and orientation
|
FitSurfaceBuilder.TargetType |
Target type provides the ability to specify a object or a color coded region as the target
|
FitSurfaceBuilder.Types |
Fit Surface creation types
|
FlatPattern.ObjectDataCsys |
Structure used to return data about objects in the flat pattern.
|
FlatPattern.ObjectDataEdge |
Structure used to return data about objects in the flat pattern.
|
FlatPattern.ObjectDataFace |
Structure used to return data about objects in the flat pattern.
|
FlatPattern.ObjectDataGeneral |
Structure used to return data about objects in the flat pattern.
|
FlatSolid.ObjectDataCsys |
Structure used to return the objects of a flat solid.
|
FlatteningAndFormingBuilder.DestinationFrameData |
This class holds the data returned from
FlatteningAndFormingBuilder.getDestinationFrame() |
FlatteningAndFormingBuilder.DistortionMap |
Distortion Map options.
|
FlatteningAndFormingBuilder.Types |
Flattening Types
|
GeneralConicBuilder.DrawingPlaneOptions |
Drawing Plane options.
|
GeneralConicBuilder.Types |
General Conic Types.
|
GeodesicIntersectBuilder.Type |
Represents the type of objects that intersect with the support faces.
|
GeodesicProjectBuilder.Type |
Represents the type of objects projected to the support faces.
|
GeomcopyBuilder.AlongPathDistanceOptions |
along path distance options
|
GeomcopyBuilder.CsysMirrorOptions |
CSYS mirror options
|
GeomcopyBuilder.TransformTypes |
user input transform types.
|
GeometricConstraintData.AutoConstraintType |
Automatic constraint types
|
GeometricConstraintData.ParameterDirection |
Parameter direction to be used for creation of the constraint at a point
which is attached to an object, for example a curve or a face
|
GlobalShapingBuilder.BodyMethod |
Represents the body method type.
|
GlobalShapingBuilder.DeformationTypeValues |
Represents the deformation type.
|
GlobalShapingBuilder.DeformBodyType |
Represent sheet deformation type.
|
GlobalShapingBuilder.DirectionMethodType |
Represents the direction method type.
|
GlobalShapingBuilder.ModifyMethodType |
Represent surface modify method.
|
GlobalShapingBuilder.OffsetMethod |
Represents the offset method type.
|
GlobalShapingBuilder.PointMethodType |
Represents the point method type.
|
GlobalShapingBuilder.RadiusType |
Represents radius options used.
|
GlobalShapingBuilder.RotationMethod |
Represents the rotation method type.
|
GlobalShapingBuilder.RotationMethodType |
Represents the rotation type.
|
GlobalShapingBuilder.TargetCurveOrientationType |
Represents the orientation of the target curve(s) to the limit curves.
|
GlobalShapingBuilder.TransitionType |
Represents the transition method type.
|
GuidedExtensionBuilderEx.SegmentType |
Segment type for segments
|
GuidedExtensionBuilderEx.Types |
Option types to create guided extension surface
|
HelixBuilder.LengthMethods |
Method for defining the length
|
HelixBuilder.OrientationOptions |
Orientation options for along spine type
|
HelixBuilder.SizeOptions |
Option indicating how size is defined
|
HelixBuilder.TurnDirections |
Option indicating direction of the turn
|
HelixBuilder.Types |
Type of helix
|
Hole.CounterboreHoleData |
This class holds the data returned from
Hole.getCounterboreHole() |
Hole.CountersinkHoleData |
This class holds the data returned from
Hole.getCountersinkHole() |
Hole.SimpleHoleData |
This class holds the data returned from
Hole.getSimpleHole() |
Hole.Subtype |
Represents the subtype of the hole
|
HoleFeatureBuilder.HoleSubtype |
Represents the subtype of the hole
|
HolePackageBuilder.HoleDepthLimitOptions |
Represents hole depth limit options.
|
HolePackageBuilder.HoleDepthOptions |
Represents hole depth specification options.
|
HolePackageBuilder.HoleForms |
Represents hole form options.
|
HolePackageBuilder.ThreadLengthOptions |
Represents thread length options.
|
HolePackageBuilder.ThreadRotationOptions |
Represents thread rotation options.
|
HolePackageBuilder.Types |
Represents hole types.
|
Human.CreateReachZoneData |
This class holds the data returned from
Human.createReachZone() |
HumanBuilder.StatureData |
This class holds the data returned from
HumanBuilder.getStatureData() |
HumanBuilder.WeightData |
This class holds the data returned from
HumanBuilder.getWeightData() |
IFormBuilder.BSurfaceExtractionOptions |
B-surface extraction options
|
IFormBuilder.GlobalTransitionTypes |
Global transition options of the surface
|
IFormBuilder.InsertionMethodOptions |
Iso-parameter curve insertion option
|
IFormBuilder.ParameterDirectionOptions |
Iso-parameter direction options
|
IFormBuilder.TransitionTypes |
Transition options of the surface
|
IsoclineCurveBuilder.CurveTypes |
The option indicating number of curves to be created
|
IsoparametricCurvesBuilder.DirectionTypes |
Curve direction options
|
IsoparametricCurvesBuilder.PlacementTypes |
Curve creation options
|
JoinCurvesBuilder.OutputCurve |
Represents the output curve type.
|
LabelChamferBuilder.ChamferOrientType |
the option for chamfer orientation types
|
LabelChamferBuilder.ChamferType |
the option for chamfer types
|
LawExtensionBuilder.OppositeSideExtensionOptions |
Opposite side extension options
|
LawExtensionBuilder.Types |
Law extension creation types
|
LawExtensionBuilderEx.MiterOptions |
Miter options
|
LawExtensionBuilderEx.OppositeSideExtensionOptions |
Opposite side extension options
|
LawExtensionBuilderEx.Types |
Law extension creation types
|
LinearDimensionBuilder.OrientationOptionType |
the option that controls whether the OrientXpress or whether the vector block
Controls the orientation of the Linear Dimension
|
MapleBuilder.AssociativityEnum |
the Associativity
|
MasterCutBuilder.CalcThroughLimitsData |
This class holds the data returned from
MasterCutBuilder.calcThroughLimits(nxopen.Direction) |
MatchEdgeBuilder.EdgeConstraintType |
Edge constraint type
|
MatchEdgeBuilder.MatchExact |
Match Exact types
|
MatchEdgeBuilder.PoleMoveDirection |
Pole movement direction
|
MatchEdgeBuilder.PoleMovementConstraintEnumType |
Pole movement type
|
MatchEdgeBuilder.Types |
Match Edge match types.
|
MatchedReferenceBuilder.ResolvedStatus |
Matched status
|
MatchedReferenceBuilder.Types |
MatchedReference block type
|
MeshSurfaceBuilder.AngleAlignmentPointsData |
This class holds the data returned from
MeshSurfaceBuilder.getAngleAlignmentPoints() |
MeshSurfaceBuilder.ConstraintDirection |
End face constraints direction.
|
MeshSurfaceBuilder.ConstraintType |
End face constraints types.
|
MeshSurfaceBuilder.FaceConstraintCollectorsData |
This class holds the data returned from
MeshSurfaceBuilder.getFaceConstraintCollectors(int, int, int) |
MeshSurfaceBuilder.ProfilePointAlignmentData |
This class holds the data returned from
MeshSurfaceBuilder.getProfilePointAlignment(int, int) |
MeshTransformerBuilder.ContinuityType |
Continuity type
|
MeshTransformerBuilder.MeshTopologyType |
Mesh topology option type
|
MeshTransformerBuilder.SmoothingType |
Smoothing option type
|
MeshTransformerBuilder.StepCountValue |
Step count enum value for converting to actual count number
|
MidSurfaceByFacePairsBuilder.PairingStrategyType |
pairing strategy
|
MidSurfaceByFacePairsBuilder.SurfaceType |
midsurface options
|
MidSurfaceByFacePairsBuilder.TrimmingOptionType |
trimming options
|
MirrorBodyBuilder.FeatureOptionType |
enum for feature option type
|
MirrorBodyBuilder.ParentPart |
the parent part types
|
MirrorBodyBuilder.WaveLinkInformationData |
This class holds the data returned from
MirrorBodyBuilder.getWaveLinkInformation() |
MirrorBuilder.CsysMirrorOptions |
the Coordinate System mirror options
|
MirrorCurveBuilder.PlaneOptions |
Represents the Plane options.
|
MirrorFaceBuilder.MirrorPlaneOptions |
Represents the mirror plane options
|
MirrorFeatureBuilder.PlaneOptions |
the Plane options.
|
MoveEdgeBuilder.EndFaceBehaviorType |
Represents the end face behavior.
|
MoveFaceBuilder.Types |
the move face types, don't use it until nx502
|
MoveObjectBuilder.LayerOptionType |
Indicates the layer on which moved or copied objects will be placed
|
MoveObjectBuilder.MoveObjectResultOptions |
Indicates whether to move or copy objects
|
NSidedSurfaceBuilder.CenterControlAxisType |
the center control types
|
NSidedSurfaceBuilder.CenterControlType |
the center control type options
|
NSidedSurfaceBuilder.FlowDirectionType |
the flow direction options
|
NSidedSurfaceBuilder.SurfaceType |
the surface type options
|
NSidedSurfaceBuilder.UVOrientationType |
the UV orientation options
|
OffsetCurveBuilder.ComputeOffsetDirectionData |
This class holds the data returned from
OffsetCurveBuilder.computeOffsetDirection() |
OffsetCurveBuilder.TrimOption |
Represents the Offset Curve trim option
|
OffsetCurveBuilder.Types |
Represents the Offset Curve types
|
OffsetEdgeBuilder.EndFaceBehaviourType |
the end face behavior settings enumeration
|
OffsetEdgeBuilder.OffsetEdgeMethod |
the offset edge method enumeration
|
OffsetEmbossBuilder.Types |
Enumeration of center types .
|
OffsetSurfaceBuilder.OrientationMethodType |
Represents the type of orientation method.
|
OffsetSurfaceBuilder.OutputOptionType |
Represents the type of output option.
|
OvercrownBuilder.ControlType |
This enum represents the control type of Global Shaping Operation
|
OvercrownBuilder.OperationType |
This enum represents the type of Global Shaping Operation
|
OvercrownBuilder.OutputType |
This enum represents the output type of Global Shaping Operation
|
OvercrownBuilder.TransitionType |
This enum represents the transition type of Global Shaping Operation
|
PartGeometryCopyBuilder.Type |
Specifies object types to copy in the part geometry copy block
|
PartModule.PartLoadOption |
Defines part load options
|
PasteFaceBuilder.PasteOptionType |
represents the paste option which defines whether the tool body is additive or subtractive.
|
PatchOpeningsBuilder.CreatePathFromOpeningData |
This class holds the data returned from
PatchOpeningsBuilder.createPathFromOpening() |
PatchOpeningsBuilder.OutputTypes |
Indicates what to output
|
PatchOpeningsBuilder.Types |
The method used to patch the opening
|
PatternFaceBuilder.PatternTypes |
Enumeration of pattern type, don't use it until nx502 .
|
PatternFeatureBuilder.ExpressionTransferOptions |
the Expression transfer options.
|
PatternFeatureBuilder.OutputOptions |
the Output options.
|
PatternFeatureBuilder.PatternMethodOptions |
the Pattern method options.
|
PointSetBuilder.CurvePointsType |
The settings for the curve points definition.
|
PointSetBuilder.FacePointsType |
The settings for the face points definition.
|
PointSetBuilder.PatternLimitsType |
The settings for the pattern limit definition.
|
PointSetBuilder.SplinePointsType |
The settings for the spline points definition.
|
PointSetBuilder.Types |
The settings for the type of Point Set feature.
|
PolylineBuilder.DrawingPlaneOptions |
Drawing plane options
|
PolylineBuilder.MovementMethodType |
Points movement types
|
PolylineBuilder.WCSOptionType |
WCS principal axis or plane types
|
ProjectCurveBuilder.ArcLengthType |
Represents Equal Arc Length type
|
ProjectCurveBuilder.DirectionType |
Represents direction method
|
ProjectCurveBuilder.ProjectionOptionType |
Represents projection option type used when direction type is along vector
|
RadialDimensionBuilder.ValueOption |
the option for radius or diameter
|
RapidSurfaceBuilder.AttachmentTypes |
the attachment types
|
RapidSurfaceBuilder.LoopTypes |
the subdivision loop types
|
RapidSurfaceBuilder.OperationTypes |
the operation types
|
RasterImage.MaxTextureSize |
Specifies the maximum number of pixels to allow for the width or height
of a raster image.
|
RefitFaceBuilder.Types |
the type of face refit
|
RegionListItemBuilder.Type |
bridge continuity
|
ReplaceFaceBuilder.ReplaceTypes |
Enumeration of replace face type, don't use it until nx502 .
|
ReplaceFeatureBuilder.MappingMethodType |
Type of mapping method to be used for replace feature
|
ResizeChamferBuilder.SectionType |
the chamfer section types
|
ResizeCurveBuilder.ValueType |
the option for radius or diameter
|
RibBuilder.RibCapGeometryOptions |
These represent the options for the Rib cap
|
RibBuilder.RibDraftOptions |
These represent the options for drafting the Rib
|
RibBuilder.RibThicknessOffsetOptions |
These represent the options for Rib Walls Offset
|
RibBuilder.RibTypes |
These represent the options for Rib type
|
RPOBuilder.AssociativityType |
Represents the associativity type for a dimension entity
|
RPOBuilder.ReferenceDirectionData |
This class holds the data returned from
RPOBuilder.getReferenceDirection() |
ScaleBuilder.Types |
Scale type
|
ScaleCurveBuilder.ScaleCurveType |
Scale type
|
SectionCurveBuilder.PlaneType |
Represents section plane type.
|
SectionCurveBuilder.SpacingType |
Represents spacing type.
|
SectionInertiaAnalysisBuilder.CoordSys |
The coordinate system associated with the analysis.
|
SectionInertiaAnalysisBuilder.PropertyType |
Type of Analysis property.
|
SectionInertiaAnalysisBuilder.SampleMethod |
Type of sampling method to be used in sections along curve type of analysis.
|
SectionInertiaAnalysisBuilder.SectionAxisNormal |
Slice direction in case of parallel section type of analysis.
|
SectionInertiaAnalysisBuilder.Types |
The type of Section Inertia Analysis to be performed.
|
SectionSurfaceBuilder.ControlRegionEnum |
This enum represents the type of the region where depth and skew can be applied
|
SectionSurfaceBuilder.FlowDirectionEnum |
This enum represents the type of flow direction for the start/end of the section surface
|
SectionSurfaceBuilder.SectionMethodCircularTangentEnum |
This enum represents the current types of section method for circular tangent method
|
SectionSurfaceBuilder.SectionMethodFilletBridgeEnum |
This enum represents the current types of section method for fillet bridge method
|
SectionSurfaceBuilder.SectionMethodRhoEnum |
This enum represents the current types of section method for section methods with rho law
|
SectionSurfaceBuilder.Types |
This enum represents the current types of section surface methods
|
SectionSurfaceBuilder.UDegreeEnum |
This enum represents the current types of section surface in u direction
|
SectionSurfaceBuilderEx.BodyType |
Body Preference type.
|
SectionSurfaceBuilderEx.CircularType |
This enum represents the current modes of circular type section surfaces.
|
SectionSurfaceBuilderEx.ConicType |
This enum represents the current modes of conic type section surfaces.
|
SectionSurfaceBuilderEx.ControlRegionType |
Control Region type.
|
SectionSurfaceBuilderEx.CubicType |
This enum represents the current modes of cubic type section surfaces.
|
SectionSurfaceBuilderEx.LinearType |
This enum represents the current modes of linear type section surfaces.
|
SectionSurfaceBuilderEx.SectionMethodCircleTangentType |
Section method Circle Tangent type.
|
SectionSurfaceBuilderEx.SectionMethodFilletBridgeType |
Section method Fillet Bridge type.
|
SectionSurfaceBuilderEx.SectionMethodRhoType |
Section method Rho type.
|
SectionSurfaceBuilderEx.SlopeControlType |
Slope Control type.
|
SectionSurfaceBuilderEx.Spine |
Spine type.
|
SectionSurfaceBuilderEx.SpineEndFlowType |
Spine End Flow type.
|
SectionSurfaceBuilderEx.SpineStartFlowType |
Spine Start Flow type.
|
SectionSurfaceBuilderEx.Types |
This enum represents the current types of section surface methods.
|
SectionSurfaceBuilderEx.UDegreeType |
Surface Degree type.
|
SelectFeature.ValueData |
This class holds the data returned from
SelectFeature.getValue() |
SelectFeature.ValueWithCaeSetObjectInfoData |
This class holds the data returned from
SelectFeature.getValue() |
SelectFeature.ValueWithSnapData |
This class holds the data returned from
SelectFeature.getValue() |
SelectFlatPattern.ValueData |
This class holds the data returned from
SelectFlatPattern.getValue() |
SelectFlatPattern.ValueWithCaeSetObjectInfoData |
This class holds the data returned from
SelectFlatPattern.getValue() |
SelectFlatPattern.ValueWithSnapData |
This class holds the data returned from
SelectFlatPattern.getValue() |
SelectPartModule.ValueData |
This class holds the data returned from
SelectPartModule.getValue() |
SelectPartModule.ValueWithCaeSetObjectInfoData |
This class holds the data returned from
SelectPartModule.getValue() |
SelectPartModule.ValueWithSnapData |
This class holds the data returned from
SelectPartModule.getValue() |
SewBuilder.Types |
Specifies the sew type.
|
ShelfBuilder.DepthMethods |
Depth Method for Depth Face
|
ShelfBuilder.LengthMethods |
Depth Method for Length
|
ShelfBuilder.ReferenceType |
Type of Reference Object
|
ShelfBuilder.StepMethod |
Step Method for Side Face
|
ShelfBuilder.Types |
Type of shelf.
|
ShipCollection.SteelFeatureApproach |
Represents steel feature different approaches.
|
SilhouetteFlangeBuilder.OutputSurfaceOptions |
Output surface options
|
SilhouetteFlangeBuilder.ReferenceDirectionOptions |
Reference direction options
|
SilhouetteFlangeBuilder.Types |
Silhouette flange creation types
|
SketchConversionStatus.ReasonType |
Reason for partial-success or failure of conversion to sketch
|
SketchConversionStatus.Type |
Status of conversion - Success, Failure or Partial-Success
|
SmoothCurveStringBuilder.LevelTypes |
the smoothing levels.
|
SmoothCurveStringBuilder.MergeTypes |
the options to merge curves after being made continuous.
|
SmoothCurveStringBuilder.Types |
the type of input curves.
|
SmoothSplineBuilder.Types |
This enum represents the Smoothing Type option
|
SnipSurfaceBuilder.Types |
Snip method added in v 7.5.0
|
SphereBuilder.Types |
Represents the sphere types.
|
SpineCurveBuilder.ArcSegmentsTypes |
This enum represents the arc segments types
|
StepBuilder.DepthMethods |
Represents face operations applied to the motion face
|
StepBuilder.ReferenceBoundaryTypes |
Represents selected type as reference boundary object
|
StepBuilder.StepFaceMethods |
Represents face operations applied to the step face
|
StepBuilder.StepTypes |
Represents the step feature type
|
StepBuilder.StepWallMethods |
Represents face operation applied to the step wall face
|
StudioSplineBuilder.CurveOption |
Options of the actions to be taken on an input non-parametric spline
after its editing is done.
|
StudioSplineBuilder.MatchKnotsType |
Options for creating knots at the defining points in case of through point spline
|
StudioSplineBuilder.Method |
Spline methods.
|
StudioSplineBuilderEx.DrawingPlaneOptions |
Drawing plane options
|
StudioSplineBuilderEx.InputCurveOptions |
Options of the actions to be taken on an input non-parametric spline
after its editing is done.
|
StudioSplineBuilderEx.MatchKnotsTypes |
Options for creating knots at the defining points in case of through point spline
|
StudioSplineBuilderEx.MovementMethodType |
Points movement types
|
StudioSplineBuilderEx.Types |
Spline methods.
|
StudioSplineBuilderEx.WCSOptionType |
WCS principal axis or plane types
|
StudioSurfaceBuilder.TransitionOptions |
the transition control options when using By Points alignment
method
|
StudioXformBuilder.AdvancedMethodType |
Represents the advanced method type
|
StudioXformBuilder.FeatureType |
Represents the feature type
|
StudioXformBuilder.InsertKnotDirectionType |
Represents the insert knot direction type
|
StudioXformBuilder.PlanarizeDirectionType |
Represents the planarize direction type
|
StudioXformBuilder.PlanarizeMethodType |
Represents the planarize method type
|
StudioXformBuilder.PlanarizePlaneOptionType |
Represents the plane option type
|
StudioXformBuilder.RotatingPivotType |
Represents the rotating pivot type
|
StudioXformBuilder.RotationDirectionType |
Represents the rotation direction type
|
StudioXformBuilder.ScalingCenterType |
Represents the scaling center type
|
StudioXformBuilder.ScalingDirectionType |
Represents the scaling direction type
|
StudioXformBuilder.TranslationDirectionType |
Represents the translation direction type
|
StudioXformBuilder.Types |
Represents the Xform type
|
StudioXformBuilderEx.AdvancedMethodOptionType |
Represents the advanced method option type
|
StudioXformBuilderEx.AdvancedMethodType | Deprecated
Deprecated in NX8.5.0.
|
StudioXformBuilderEx.ExtrationMethodType |
B-surface extraction method
|
StudioXformBuilderEx.FeatureType |
Represents the feature type
|
StudioXformBuilderEx.InsertKnotDirectionType |
Represents the insert knot direction type
|
StudioXformBuilderEx.InsertPoleType |
Represents the insert pole type
|
StudioXformBuilderEx.MovementMethodType |
Represents the Xform movement type
|
StudioXformBuilderEx.PlanarizeDirectionType |
Represents the planarize direction type
|
StudioXformBuilderEx.PlanarizeMethodType |
Represents the planarize method type
|
StudioXformBuilderEx.PlanarizeProjectionPlaneType |
Represents the planarize projection plane type
|
StudioXformBuilderEx.PoleEditType |
Editing types of a pole of spline belonging to a Studio Spline feature
|
StudioXformBuilderEx.PrincipalMovementDirectionType |
Represents the principal movement direction type
|
StudioXformBuilderEx.PrincipalRotatingAxisType |
Represents the principal rotation axis type
|
StudioXformBuilderEx.PrincipalScalingDirectionType |
Represents the principal scaling direction type
|
StudioXformBuilderEx.ProportionalPoleControlType |
Represents the pole control type in proportional method
|
StudioXformBuilderEx.RotatingAxisType |
Represents the rotation axis type
|
StudioXformBuilderEx.RotatingPivotType |
Represents the rotating pivot type
|
StudioXformBuilderEx.ScalingCenterType |
Represents the scaling center type
|
StudioXformBuilderEx.ScalingDirectionType |
Represents the scaling direction type
|
StudioXformBuilderEx.SurfaceDirectionType |
Represents the U or V direction of a B-Surface
|
StudioXformBuilderEx.Types |
Represents the Xform editing type
|
StyledBlendBuilder.StyledBlendRadiusConstraintType |
The radius constraint type
|
StyledBlendBuilder.StyledBlendShapeControlType |
The shape control types
|
StyledBlendBuilder.StyledBlendTrimMethodType |
The trim method types
|
StyledBlendBuilder.Types |
The styled blend types
|
StyledCornerBuilder.CurveControlTypes |
Curve control types
|
StyledCornerBuilder.InteriorCurveTypes |
Intertior curve type
|
StyledCornerBuilder.ShapeControlMethodsTypes |
Shape control types
|
StyledCornerBuilder.TrimAndSewMethodTypes |
Trim and attach method types
|
StyledCornerBuilder.TrimCurveTypes |
Trim curve types
|
StyledSweepBuilder.FixedStringOptions |
This enum represents the Fixed String option
|
StyledSweepBuilder.ScalingMethodOptions |
This enum represents the Scaling Method option
|
StyledSweepBuilder.SectionOrientationOptions |
This enum represents the Section Orientation option
|
StyledSweepBuilder.TransitionOptions |
This enum represents the Transition option
|
StyledSweepBuilder.Types |
This enum represents the sweep type option (Number of Guides)
|
SweptBuilder.InterpolationOptions |
This enum represents the Interpolation option.
|
SweptBuilder.SectionLocationTypes |
This enum represents the Section Location option.
|
SweptVolumeBuilder.SweepOrient |
These represent the type of Sweep Orientation feature to be created
|
SymmetricBuilder.PlaneOptions |
Represents the plane options.
|
TabNoteCfgBuilder.Refplane |
the reference plane type.
|
TextBuilder.FontStyleOptions |
Font style options
|
TextBuilder.OnFacePlacementMethodOptions |
The placement options for
TextBuilder.Types.ON_FACE type |
TextBuilder.OrientationMethodOptions |
The orientation options for
TextBuilder.Types.ON_CURVE type |
TextBuilder.ScriptOptions |
Script or character set options
|
TextBuilder.Types |
Text placement type
|
ThroughCurveMeshBuilder.BodyPreferenceTypes |
This enum represents the body type option.
|
ThroughCurveMeshBuilder.ConstructionMethod |
This enum represents the Construction options.
|
ThroughCurveMeshBuilder.EmphasisType |
This enum represents the Emphasis options.
|
ThroughCurvesBuilder.BodyPreferenceTypes |
This enum represents the body type option.
|
ThroughCurvesBuilder.ConstructionMethod |
This enum represents the Construction options.
|
ThroughCurvesBuilder.PatchTypes |
This enum represents the Patch options.
|
ToolingBoxBuilder.RefCsysType |
the type of reference csys for box feature
|
ToolingBoxBuilder.Types |
the type for box feature
|
TrimAndExtendBuilder.ArrowSideType |
Trim or Extend Arrow Side Results type.
|
TrimAndExtendBuilder.OperationType |
Trim or Extend operation type.
|
TrimBodyBuilder.DirectionType |
Represents the trim direction
|
TrimCurveBuilder.CurveEndOptions |
Represents the trim curve end options
|
TrimCurveBuilder.CurveExtensionTypes |
Represents the trim curve extension types
|
TrimCurveBuilder.CurveTrimRegionOptions |
Represents the trim curve trim region options
|
TrimCurveBuilder.FirstBoundingObjectEndOptions |
Represents the trim curve first bounding object end options
|
TrimCurveBuilder.FirstBoundingObjectOptions |
Represents the trim curve first bounding object options
|
TrimCurveBuilder.InteresectionDirectionOptions |
Represents the trim curve interesection direction options
|
TrimCurveBuilder.InteresectionMethods |
Represents the trim curve interesection methods
|
TrimCurveBuilder.SecondBoundingObjectEndOptions |
Represents the trim curve second bounding object end options
|
TrimCurveBuilder.SecondBoundingObjectOptions |
Represents the trim curve second bounding object options
|
TrimExtendBuilder.ArrowSideOptions |
This enum represents the TrimExtend Arrow Side Options
|
TrimExtendBuilder.CreationTypes |
This enum represents the TrimExtend types
|
TrimExtendBuilder.ExtensionMethods |
This enum represents the TrimExtend Extension Methods
|
TrimSheetBuilder.KeepDiscardOption |
Represents the keep discard options for selected region
|
TubeBuilder.Output |
This enum represents the topology output option
|
UnsewBuilder.UnsewOutput |
Unsew body option type.
|
UnsewBuilder.UnsewTool |
Unsew tool option type.
|
VariableOffsetBuilder.MethodOptions |
offset methods for creating the new surface
|
VarOffsetFaceBuilder.Continuity |
bridge continuity
|
VarOffsetFaceBuilder.Output |
body output type
|
VarOffsetFaceBuilder.Types |
feature type
|
VirtualCurveBuilder.Types |
the type of virtual curve
|
WaveDatumBuilder.ParentPartType |
enum for scope of part
|
WaveDatumBuilder.WaveLinkInformationData |
This class holds the data returned from
WaveDatumBuilder.getWaveLinkInformation() |
WaveLinkBuilder.Types |
Wave Linker type
|
WavePointBuilder.ParentPartType |
enum for scope of part
|
WavePointBuilder.WaveLinkInformationData |
This class holds the data returned from
WavePointBuilder.getWaveLinkInformation() |
WaveRoutingBuilder.WaveLinkInformationData |
This class holds the data returned from
WaveRoutingBuilder.getWaveLinkInformation() |
WaveSketchBuilder.WaveLinkInformationData |
This class holds the data returned from
WaveSketchBuilder.getWaveLinkInformation() |
WrapBuilder.Types |
Settings for the type of wrap operation being performed.
|
WrapGeometryBuilder.CloseGapType |
Represents the close gap type
|
Copyright 2016 Siemens Product Lifecycle Management Software Inc. All Rights Reserved.