nxopen.cae

Interface LaminateGlobalLayupMgr

All Superinterfaces:

Remote

public interface LaminateGlobalLayupMgr
extends Remote

Represent the laminate global layup manager which manages all the global layups in the laminate ply-based modeling project
To obtain an instance of this class, refer to FEModel

Created in NX6.0.0

Method Summary

Modifier and Type	Method and Description
void	autogroupByMaterials() Create groups for materials License requirements: nx_lam_comp_adv ("Laminate Composites Advanced") .
void	autogroupLayupsByMaterials(LaminateGlobalLayup[] layups) Create groups for materials used in the selected layup(s) License requirements: nx_lam_comp_adv ("Laminate Composites Advanced") .
void	computeZones() Compute zones for all laminate properties in the model.
FlatPatternsBuilder	createFlatPatternsBuilder() Creates a FlatPatternsBuilder License requirements: nx_lam_comp_adv ("Laminate Composites Advanced") Created in NX6.0.0
GlobalLayupImportFromPptBuilder	createGlobalLayupImportFromPptBuilder() Creates a GlobalLayupImportFromPptBuilder License requirements: nx_lam_comp_adv ("Laminate Composites Advanced") Created in NX6.0.0
LaminateExtrudeSetupBuilder	createLaminateExtrudeSetupBuilder(LaminateExtrudeSetup extrudeSetup) Creates a LaminateExtrudeSetupBuilder License requirements: nx_lam_comp_adv ("Laminate Composites Advanced") Created in NX6.0.4
LaminateFillSetupBuilder	createLaminateFillSetupBuilder(LaminateExtrudeSetup extrudeSetup) Creates a LaminateFillSetupBuilder License requirements: nx_lam_comp_adv ("Laminate Composites Advanced") Created in NX7.5.2
LaminateImportedLayupBuilder	createLaminateImportedLayupBuilder(LaminateGlobalLayup globalLayup) Creates a LaminateImportedLayupBuilder License requirements: nx_lam_comp_adv ("Laminate Composites Advanced") Created in NX6.0.4
LaminateImportZonesBuilder	createLaminateImportZonesBuilder() Creates LaminateImportZonesBuilder License requirements: nx_lam_comp_adv ("Laminate Composites Advanced") Created in NX10.0.0
LaminateMatOrientationBuilder	createLaminateMatOrientationBuilder(LaminateMatOrientation matOrientation) Creates a LaminateMatOrientationBuilder License requirements: nx_lam_comp_adv ("Laminate Composites Advanced") Created in NX7.5.0
LaminateSelectEntitiesBuilder	createLaminateSelectEntitiesBuilder() Creates a LaminateSelectEntitiesBuilder License requirements: nx_lam_comp_adv ("Laminate Composites Advanced") Created in NX7.5.2
LaminateLayupOffsetBuilder	createLayupOffsetBuilder(LaminateLayupOffset layupoffset) Creates a LaminateLayupOffsetBuilder License requirements: nx_lam_comp_adv ("Laminate Composites Advanced") Created in NX7.5.0
LaminateRelabelPliesBuilder	createRelabelPliesBuilder() Creates LaminateRelabelPliesBuilder License requirements: nx_lam_comp_adv ("Laminate Composites Advanced") Created in NX10.0.0
LaminateViewDrapingResultsBuilder	createViewDrapingResultsBuilder(LaminateGlobalLayup globalLayup, LaminatePly ply) Creates a FlatPatternsBuilder License requirements: nx_lam_comp_adv ("Laminate Composites Advanced") Created in NX6.0.0
ViewLaminateBuilder	createViewLaminateBuilder(Laminate laminate, int zoneIndex) Creates a ViewLaminateBuilder License requirements: nx_lam_comp_adv ("Laminate Composites Advanced") Created in NX6.0.0
LaminateLayupOffset	defaultLayupOffset() Returns the default layup offset License requirements: nx_lam_comp_adv ("Laminate Composites Advanced") .
int	defaultMaterialOrientation() Returns the default material orientation License requirements: nx_lam_comp_adv ("Laminate Composites Advanced") .
void	exportDrapingDomainAsGroups() For each LaminateGlobalLayup in the model, create a group with the draping domain entities License requirements: nx_lam_comp_adv ("Laminate Composites Advanced") Created in NX7.5.2
void	exportZoneInformation(String csvFilename) Export zone information to a CSV file.
void	exportZonesAsGroups() For each zone of each Laminate in the model, create an element group License requirements: nx_lam_comp_adv ("Laminate Composites Advanced") Created in NX7.5.2
void	exportZonesAsLaminates() For each zone of each Laminate in the model, create an equivalent laminate physical property License requirements: nx_lam_comp_adv ("Laminate Composites Advanced") Created in NX7.5.2
LaminateExtrudeSetupCollection	extrudeSetups() Collection of laminate extrusion setup .
LaminateGlobalLayupCollection	globalLayups() Collection of managed global layups .
void	information() Display global layup manager information License requirements: nx_lam_comp_adv ("Laminate Composites Advanced") .
LaminateLayupOffsetCollection	layupOffsets() Collection of managed layup offset rules .
LaminateMatOrientationCollection	matOrientations() Collection of material orientations .
void	removeLayupOffset(int layupOffset) A method to remove a layup offset License requirements: nx_lam_comp_adv ("Laminate Composites Advanced") .
void	removeMaterialOrientation(int matOrientation) A method to remove a material orientation License requirements: nx_lam_comp_adv ("Laminate Composites Advanced") .
void	setDefaultLayupOffset(LaminateLayupOffset defaultLayup) License requirements: nx_lam_comp_adv ("Laminate Composites Advanced") .
void	setDefaultMaterialOrientation(int defaultOrientation) License requirements: nx_lam_comp_adv ("Laminate Composites Advanced") .
void	updateDraping() Compute draping for all the plies of all the global layups in the part.
void	updatePlyDraping(LaminatePly[] plies) Compute draping for all the selected plies.

Method Detail

globalLayups

LaminateGlobalLayupCollection globalLayups()
                                    throws RemoteException

Collection of managed global layups .
Created in NX3.0.0

Throws:

RemoteException

layupOffsets

LaminateLayupOffsetCollection layupOffsets()
                                    throws RemoteException

Collection of managed layup offset rules .
Created in NX7.5.0

Throws:

RemoteException

matOrientations

LaminateMatOrientationCollection matOrientations()
                                          throws RemoteException

Collection of material orientations .
Created in NX7.5.0

Throws:

RemoteException

extrudeSetups

LaminateExtrudeSetupCollection extrudeSetups()
                                      throws RemoteException

Collection of laminate extrusion setup .
Created in NX7.5.0

Throws:

RemoteException

createGlobalLayupImportFromPptBuilder

GlobalLayupImportFromPptBuilder createGlobalLayupImportFromPptBuilder()
                                                               throws NXException,
                                                                      RemoteException

Creates a GlobalLayupImportFromPptBuilder
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")

Created in NX6.0.0

Throws:

NXException

RemoteException

createLayupOffsetBuilder

LaminateLayupOffsetBuilder createLayupOffsetBuilder(LaminateLayupOffset layupoffset)
                                             throws NXException,
                                                    RemoteException

Creates a LaminateLayupOffsetBuilder
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")

Created in NX7.5.0

Parameters:

layupoffset - Laminate Layup Offset

Throws:

NXException

RemoteException

createLaminateMatOrientationBuilder

LaminateMatOrientationBuilder createLaminateMatOrientationBuilder(LaminateMatOrientation matOrientation)
                                                           throws NXException,
                                                                  RemoteException

Creates a LaminateMatOrientationBuilder
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")

Created in NX7.5.0

Parameters:

matOrientation - Laminate Material Orientation

Throws:

NXException

RemoteException

createViewLaminateBuilder

ViewLaminateBuilder createViewLaminateBuilder(Laminate laminate,
                                              int zoneIndex)
                                       throws NXException,
                                              RemoteException

Creates a ViewLaminateBuilder
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")

Created in NX6.0.0

Parameters:

laminate - Inherited laminate physical

zoneIndex - Zone index

Throws:

NXException

RemoteException

createFlatPatternsBuilder

FlatPatternsBuilder createFlatPatternsBuilder()
                                       throws NXException,
                                              RemoteException

Creates a FlatPatternsBuilder
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")

Created in NX6.0.0

Throws:

NXException

RemoteException

createViewDrapingResultsBuilder

LaminateViewDrapingResultsBuilder createViewDrapingResultsBuilder(LaminateGlobalLayup globalLayup,
                                                                  LaminatePly ply)
                                                           throws NXException,
                                                                  RemoteException

Creates a FlatPatternsBuilder
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")

Created in NX6.0.0

Parameters:

globalLayup - Global Layup

ply - Ply

Throws:

NXException

RemoteException

defaultLayupOffset

LaminateLayupOffset defaultLayupOffset()
                                throws NXException,
                                       RemoteException

Returns the default layup offset
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
Created in NX7.5.0

Returns:

default layup offset

Throws:

NXException

RemoteException

setDefaultLayupOffset

void setDefaultLayupOffset(LaminateLayupOffset defaultLayup)
                    throws NXException,
                           RemoteException

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
Created in NX7.5.0

Parameters:

defaultLayup - default layup offset

Throws:

NXException

RemoteException

defaultMaterialOrientation

int defaultMaterialOrientation()
                        throws NXException,
                               RemoteException

Returns the default material orientation
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
Created in NX7.5.0

Returns:

the default material orientation

Throws:

NXException

RemoteException

setDefaultMaterialOrientation

void setDefaultMaterialOrientation(int defaultOrientation)
                            throws NXException,
                                   RemoteException

License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
Created in NX7.5.0

Parameters:

defaultOrientation - the default material orientation

Throws:

NXException

RemoteException

removeMaterialOrientation

void removeMaterialOrientation(int matOrientation)
                        throws NXException,
                               RemoteException

A method to remove a material orientation
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
Created in NX7.5.0

Parameters:

matOrientation - the material orientation to remove

Throws:

NXException

RemoteException

removeLayupOffset

void removeLayupOffset(int layupOffset)
                throws NXException,
                       RemoteException

A method to remove a layup offset
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
Created in NX7.5.0

Parameters:

layupOffset - the layup offset to remove

Throws:

NXException

RemoteException

createLaminateExtrudeSetupBuilder

LaminateExtrudeSetupBuilder createLaminateExtrudeSetupBuilder(LaminateExtrudeSetup extrudeSetup)
                                                       throws NXException,
                                                              RemoteException

Creates a LaminateExtrudeSetupBuilder
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")

Created in NX6.0.4

Parameters:

extrudeSetup -

Returns:

created builder

Throws:

NXException

RemoteException

createLaminateFillSetupBuilder

LaminateFillSetupBuilder createLaminateFillSetupBuilder(LaminateExtrudeSetup extrudeSetup)
                                                 throws NXException,
                                                        RemoteException

Creates a LaminateFillSetupBuilder
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")

Created in NX7.5.2

Parameters:

extrudeSetup -

Returns:

created builder

Throws:

NXException

RemoteException

createLaminateImportedLayupBuilder

LaminateImportedLayupBuilder createLaminateImportedLayupBuilder(LaminateGlobalLayup globalLayup)
                                                         throws NXException,
                                                                RemoteException

Creates a LaminateImportedLayupBuilder
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")

Created in NX6.0.4

Parameters:

globalLayup -

Returns:

created builder

Throws:

NXException

RemoteException

updateDraping

void updateDraping()
            throws NXException,
                   RemoteException

Compute draping for all the plies of all the global layups in the part. Plies that are already computed wont be recomputed.
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")

Created in NX7.5.1

Throws:

NXException

RemoteException

updatePlyDraping

void updatePlyDraping(LaminatePly[] plies)
               throws NXException,
                      RemoteException

Compute draping for all the selected plies.
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")

Created in NX10.0.0

Parameters:

plies -

Throws:

NXException

RemoteException

information

void information()
          throws NXException,
                 RemoteException

Display global layup manager information
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
Created in NX7.5.1

Throws:

NXException

RemoteException

computeZones

void computeZones()
           throws NXException,
                  RemoteException

Compute zones for all laminate properties in the model. Reads the global layups, updates the draping and calculates the zones on the laminate. Existing zones will be overriden.
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")

Created in NX7.5.1

Throws:

NXException

RemoteException

exportZoneInformation

void exportZoneInformation(String csvFilename)
                    throws NXException,
                           RemoteException

Export zone information to a CSV file.
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")

Created in NX7.5.1

Parameters:

csvFilename -

Throws:

NXException

RemoteException

createLaminateSelectEntitiesBuilder

LaminateSelectEntitiesBuilder createLaminateSelectEntitiesBuilder()
                                                           throws NXException,
                                                                  RemoteException

Creates a LaminateSelectEntitiesBuilder
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")

Created in NX7.5.2

Returns:

created builder

Throws:

NXException

RemoteException

exportZonesAsGroups

void exportZonesAsGroups()
                  throws NXException,
                         RemoteException

For each zone of each Laminate in the model, create an element group
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")

Created in NX7.5.2

Throws:

NXException

RemoteException

exportZonesAsLaminates

void exportZonesAsLaminates()
                     throws NXException,
                            RemoteException

For each zone of each Laminate in the model, create an equivalent laminate physical property
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")

Created in NX7.5.2

Throws:

NXException

RemoteException

exportDrapingDomainAsGroups

void exportDrapingDomainAsGroups()
                          throws NXException,
                                 RemoteException

For each LaminateGlobalLayup in the model, create a group with the draping domain entities
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")

Created in NX7.5.2

Throws:

NXException

RemoteException

autogroupByMaterials

void autogroupByMaterials()
                   throws NXException,
                          RemoteException

Create groups for materials
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
Created in NX9.0.0

Throws:

NXException

RemoteException

autogroupLayupsByMaterials

void autogroupLayupsByMaterials(LaminateGlobalLayup[] layups)
                         throws NXException,
                                RemoteException

Create groups for materials used in the selected layup(s)
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
Created in NX10.0.0

Parameters:

layups -

Throws:

NXException

RemoteException

createLaminateImportZonesBuilder

LaminateImportZonesBuilder createLaminateImportZonesBuilder()
                                                     throws NXException,
                                                            RemoteException

Creates LaminateImportZonesBuilder
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")

Created in NX10.0.0

Throws:

NXException

RemoteException

createRelabelPliesBuilder

LaminateRelabelPliesBuilder createRelabelPliesBuilder()
                                               throws NXException,
                                                      RemoteException

Creates LaminateRelabelPliesBuilder
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")

Created in NX10.0.0

Throws:

NXException

RemoteException