nxopen

Interface View

All Superinterfaces:

INXObject, NXObject, Remote, TaggedObject

All Known Subinterfaces:

BaseView, CutView, DetailView, DraftingView, DrawingView, LightweightSectionView, ModelingView, ProjectedView, SearchModelView, SectionView

public interface View
extends NXObject

Represents a view. View can be obtained either from ViewCollection or from ModelingViewCollection .
This class is not created directly by the user.

Created in NX3.0.0

Nested Class Summary

Nested Classes

Modifier and Type	Interface and Description
static class	View.Canned Describes a simplified indexing scheme for accessing canned views with interfaces that use this enum as a parameter.
static class	View.RenderingStyleType Describes the rendering style for geometry displayed in the view.
static class	View.ScaleAdjustment Describes simple, predefined adjustments that may be applied to a view's scale while another operation is performed, in conjunction, on the view.
static class	View.ScaleFactor Describes the relative scales to which a view can be set
static class	View.ShowOrHideType Specifies whether a show or hide operation, or both, has just been done

Nested classes/interfaces inherited from interface nxopen.NXObject

NXObject.AttributeInformation, NXObject.AttributeType, NXObject.ComputationalTime, NXObject.DateAndTimeFormat, NXObject.NextUserAttributeData

Method Summary

Modifier and Type	Method and Description
Point3d	absoluteOrigin() Returns the view origin in absolute space.
DisplayableObject[]	askVisibleObjects() Returns an array of objects visible in a view License requirements: None.
void	changePerspective(boolean changeViewToPerspective) Changes a view from an orthographic view to a perspective view, or from a perspective view to an orthographic view.
void	concatenate(double scale) Concatenates the given scale with the previous viewing transformation of the specified view.
void	concatenate(double scale, Point3d centerOfRotation, Vector3d rotationAxis, double angle) Concatenates the given scale and rotation with the previous viewing transformation of the specified view.
void	concatenate(Point3d translation) Concatenates the given translation with the previous viewing transformation of the specified view.
void	concatenate(Point3d translation, double scale) Concatenates the given translation and scale with the previous viewing transformation of the specified view.
void	concatenate(Point3d translation, double scale, Point3d centerOfRotation, Vector3d rotationAxis, double angle) Concatenates the given translation, scale and rotation with the previous viewing transformation of the specified view.
void	concatenate(Point3d translation, Point3d centerOfRotation, Vector3d rotationAxis, double angle) Concatenates the given translation and rotation with the previous viewing transformation of the specified view.
void	concatenate(Point3d centerOfRotation, Vector3d rotationAxis, double angle) Concatenates the given rotation with the previous viewing transformation of the specified view.
ViewDependentDisplayManager	dependentDisplay() Returns an object to perform all view dependent display operations .
void	expand() Expands the specified view to fill as much of the layout which contains the view as possible, without changing the aspect ratio of the view.
void	fit() Adjusts the bounds of a given view so that it fully encompasses the extents of the model geometry.
void	fitAfterShowOrHide(View.ShowOrHideType type) Adjusts the bounds of a given view conditionally so that it fully encompasses the extents of the model geometry.
void	fitToObjects(IFitTo[] objects) Adjusts the bounds of a given view so that it fully encompasses the extents of the given objects.
Vector3d	getAxis(XYZAxis xYZAxis) Returns one of the view axes.
boolean	lockRotations() Returns the "Lock Rotations" toggle state of a view.
void	makeWork() Makes the given view the work view.
Matrix3x3	matrix() Returns the view matrix.
void	orient(Matrix3x3 matrix) Changes the view orientation relative to the specified absolute coordinate system.
void	orient(String viewName, View.ScaleAdjustment viewScale) Changes the view orientation to a specified view.
void	orient(View.Canned viewName, View.ScaleAdjustment viewScale) Changes the view orientation to a specified canned view.
Point3d	origin() Returns the view origin.
void	regenerate() Regenerates the display of given view.
View.RenderingStyleType	renderingStyle() Returns the rendering style of the view.
boolean	restore() Restores a view to its last remembered rotation, scale and translation.
void	rotate(Matrix3x3 matrix) Rotates the view by concatenating the given matrix to the existing rotation matrix of the view.
void	rotate(Point3d origin, Vector3d vector, double angle) Rotates the specified view using the specified origin of rotation and about the specified axis.
double	scale() Returns the view scale License requirements: None.
void	setLockRotations(boolean newToggleState) Sets the "Lock Rotations" toggle state of a view.
void	setOrigin(Point3d origin) Moves the given position to the center of the view.
void	setRenderingStyle(View.RenderingStyleType renderingStyle) Sets the rendering style of the view.
void	setRotationTranslationScale(Matrix3x3 rotMatrix, Point3d translation, double scale) Sets the rotation, translation and scale of the specified view.
void	setScale(double scale) Sets the scale of the specified view to the desired scale factor.
void	setSyncViews(boolean newToggleState) Sets the "Synchronized Views" toggle state of a view.
void	setTriadVisibility(boolean triadVisibility) Sets the visibility of the view triad in the view.
void	setWcsVisibility(boolean isVisible) License requirements: None.
void	snapToClosestCannedOrientation() Changes the orientation of the given view to the orientation of the canned view whose orientation is the closest to that of the given view.
void	snapToVariantCannedOrientation() Similar to snapToClosestCannedOrientation() except it changes the orientation of the given view to the orientation of some canned view "variant" based on I-deas's 'snapview' logic whose orientation is the closest to one of the six orthographic and eight flavors of trimetric views.
boolean	syncViews() Returns the "Synchronized Views" toggle state of a view.
boolean	triadVisibility() Returns the visibility of the view triad in the view.
void	updateCustomSymbols() Updates custom symbol in a drawing member view or drawing sheet License requirements: None.
void	updateDisplay() Updates the display of given view, as needed.
ViewVisualizationSpecialEffects	visualizationSpecialEffectsPreferences() Returns an object to perform all visualization Special Effects related preferences settings .
ViewVisualizationVisual	visualizationVisualPreferences() Returns an object to perform all visualization related preferences settings .
boolean	wcsVisibility() Returns the visibility of the WCS in the view.
void	zoom(View.ScaleFactor scaleFactor) Scales the specified view to a desired relative scale.
void	zoomAboutPoint(double relativeScale, Point3d scaleAboutPoint, Point3d viewCenter) Scales the specified view such that the given scale_about_point does not move.
void	zoomByRectangle(Point3d corner1, Point3d corner2) Scales the specified view such that the specified rectangle is as large as possible while being fully contained within the viewport.

Methods inherited from interface nxopen.NXObject

createAttributeIterator, deleteAllAttributesByType, deleteAllAttributesByType, deleteAttributeByTypeAndTitle, deleteAttributeByTypeAndTitle, deleteUserAttribute, deleteUserAttributes, deleteUserAttributes, getAttributeTitlesByType, getBooleanUserAttribute, getComputationalTimeUserAttribute, getIntegerAttribute, getIntegerUserAttribute, getNextUserAttribute, getRealAttribute, getRealUserAttribute, getReferenceAttribute, getStringAttribute, getStringUserAttribute, getTimeAttribute, getTimeUserAttribute, getUserAttribute, getUserAttribute, getUserAttributeAsString, getUserAttributeCount, getUserAttributeCount, getUserAttributeCount, getUserAttributeCount, getUserAttributeLock, getUserAttributes, getUserAttributes, getUserAttributes, getUserAttributes, getUserAttributesAsStrings, getUserAttributeSize, getUserAttributeSourceObjects, hasUserAttribute, hasUserAttribute, setAttribute, setAttribute, setAttribute, setAttribute, setAttribute, setAttribute, setAttribute, setAttribute, setBooleanUserAttribute, setReferenceAttribute, setReferenceAttribute, setTimeAttribute, setTimeAttribute, setTimeUserAttribute, setTimeUserAttribute, setUserAttribute, setUserAttribute, setUserAttribute, setUserAttribute, setUserAttribute, setUserAttributeLock

Methods inherited from interface nxopen.TaggedObject

printTestData, printTestData, tag, tagValue

Methods inherited from interface nxopen.INXObject

findObject, isOccurrence, journalIdentifier, name, owningComponent, owningPart, print, prototype, setName

Method Detail

visualizationVisualPreferences

ViewVisualizationVisual visualizationVisualPreferences()
                                                throws RemoteException

Returns an object to perform all visualization related preferences settings .
Created in NX3.0.0

Throws:

RemoteException

visualizationSpecialEffectsPreferences

ViewVisualizationSpecialEffects visualizationSpecialEffectsPreferences()
                                                                throws RemoteException

Returns an object to perform all visualization Special Effects related preferences settings .
Created in NX3.0.0

Throws:

RemoteException

dependentDisplay

ViewDependentDisplayManager dependentDisplay()
                                      throws RemoteException

Returns an object to perform all view dependent display operations .
Created in NX3.0.0

Throws:

RemoteException

concatenate

void concatenate(Point3d translation)
          throws NXException,
                 RemoteException

Concatenates the given translation with the previous viewing transformation of the specified view. The translation is defined in view space.
In batch mode, the translation of the view is modified, but no display occurs

License requirements: None.

Created in NX4.0.0

Parameters:

translation - Point in view space to put at the center of the view

Throws:

NXException

RemoteException

concatenate

void concatenate(double scale)
          throws NXException,
                 RemoteException

Concatenates the given scale with the previous viewing transformation of the specified view. The scale is applied to the view using the current view origin.
In batch mode, the scale of the view is modified, but no display occurs.

License requirements: None.

Created in NX4.0.0

Parameters:

scale - Relative scale factor

Throws:

NXException

RemoteException

concatenate

void concatenate(Point3d translation,
                 double scale)
          throws NXException,
                 RemoteException

Concatenates the given translation and scale with the previous viewing transformation of the specified view. The translation is defined in view space, and conceptually occurs first. Then, the scale is applied to the view using the new view origin. Although this is logically a two step process, only the final result appears in the graphics window.
In batch mode, the translation and scale of the view are modified, but no display occurs.

License requirements: None.

Created in NX4.0.0

Parameters:

translation - Point in view space to put at the center of the view

scale - Relative scale factor

Throws:

NXException

RemoteException

concatenate

void concatenate(Point3d centerOfRotation,
                 Vector3d rotationAxis,
                 double angle)
          throws NXException,
                 RemoteException

Concatenates the given rotation with the previous viewing transformation of the specified view. First, if a center of rotation is given, a translation occurs to move the center of the view to the center of rotation. Then, the rotation occurs about the center of rotation. Finally, if a center of rotation is being used, the view is translated back to the origin it had upon entering the function. Although this is logically a three step process, only the final result appears in the graphics window.
In batch mode, the rotation of the view is modified, but no display occurs.

License requirements: None.

Created in NX4.0.0

Parameters:

centerOfRotation - If not NULL, this specifies a point in view space about which the view is to be rotated

rotationAxis - The axis to rotate about

angle - Rotation angle in radians

Throws:

NXException

RemoteException

concatenate

void concatenate(Point3d translation,
                 Point3d centerOfRotation,
                 Vector3d rotationAxis,
                 double angle)
          throws NXException,
                 RemoteException

Concatenates the given translation and rotation with the previous viewing transformation of the specified view. The translation is defined in view space, and conceptually occurs first. Then, if a center of rotation is given, a translation occurs to move the center of the view to the center of rotation. Third, the rotation occurs about the center of rotation. Finally, if a center of rotation is being used, the view is translated back to the origin it had after the translation. Although this is logically a four step process, only the final result appears in the graphics window.
In batch mode, the translation and rotation of the view are modified, but no display occurs.

License requirements: None.

Created in NX4.0.0

Parameters:

translation - Point in view space to put at the center of the view

centerOfRotation - If not NULL, this specifies a point in view space about which the view is to be rotated

rotationAxis - The axis to rotate about

angle - Rotation angle in radians

Throws:

NXException

RemoteException

concatenate

void concatenate(double scale,
                 Point3d centerOfRotation,
                 Vector3d rotationAxis,
                 double angle)
          throws NXException,
                 RemoteException

Concatenates the given scale and rotation with the previous viewing transformation of the specified view. First, the scale is applied to the view using the current view origin. Then, if a center of rotation is given, a translation occurs to move the center of the view to the center of rotation. Third, the rotation occurs about the center of rotation. Finally, if a center of rotation is being used, the view is translated back to the origin it had upon entering the function. Although this is logically a four step process, only the final result appears in the graphics window.
In batch mode, the scale and rotation of the view are modified, but no display occurs.

License requirements: None.

Created in NX4.0.0

Parameters:

scale - Relative scale factor

centerOfRotation - If not NULL, this specifies a point in view space about which the view is to be rotated

rotationAxis - The axis to rotate about

angle - Rotation angle in radians

Throws:

NXException

RemoteException

concatenate

void concatenate(Point3d translation,
                 double scale,
                 Point3d centerOfRotation,
                 Vector3d rotationAxis,
                 double angle)
          throws NXException,
                 RemoteException

Concatenates the given translation, scale and rotation with the previous viewing transformation of the specified view. The translation is defined in view space, and conceptually occurs first. Then the scale is applied to the view using the newly defined center. Third, a translation occurs to move the center of the view to the center of rotation (if any). Fourth, the rotation occurs about the center of rotation. Finally, if a center of rotation is being used, the view is translated back to its origin as specified by the first argument. Although this is logically a five step process, only the final result appears in the graphics window.
In batch mode, the translation, scale and rotation of the view are modified, but no display occurs.

License requirements: None.

Created in NX4.0.0

Parameters:

translation - Point in view space to put at the center of the view

scale - Relative scale factor

centerOfRotation - If not NULL, this specifies a point in view space about which the view is to be rotated

rotationAxis - The axis to rotate about

angle - Rotation angle in radians

Throws:

NXException

RemoteException

expand

void expand()
     throws NXException,
            RemoteException

Expands the specified view to fill as much of the layout which contains the view as possible, without changing the aspect ratio of the view. Other views in the layout are no longer displayed. The view becomes the work view. A view that is not displayed cannot be expanded.
In batch mode, the data for the view is changed to reflect that the view is expanded, but no display occurs.

License requirements: None.

Created in NX4.0.0

Throws:

NXException

RemoteException

fit

void fit()
  throws NXException,
         RemoteException

Adjusts the bounds of a given view so that it fully encompasses the extents of the model geometry. If the view is displayed, the changes will appear in the display of that view, and, if enabled, the change in the bounds of the view is animated.
In batch mode, the data for the bounds of the view are changed to the adjusted bounds, but no display occurs.

License requirements: None.

Created in NX3.0.0

Throws:

NXException

RemoteException

fitAfterShowOrHide

void fitAfterShowOrHide(View.ShowOrHideType type)
                 throws NXException,
                        RemoteException

Adjusts the bounds of a given view conditionally so that it fully encompasses the extents of the model geometry. This method is intended to be used only immediately after a show or hide operation has been done. The fit operation is performed only if the "Fit on Show or Hide" option is enabled by SessionVisualizationScreen.doFitOnHideOrShow() , and if the work view is not a drawing view. If only a hide operation has been done and a fit would cause the view scale to decrease, the fit will not be done. If the view is displayed, the changes will appear in the display of that view, and, if enabled, the change in the bounds of the view is animated.
In batch mode, the data for the bounds of the view may be changed to the adjusted bounds, if the "Fit on Show or Hide" option is enabled and the other conditions are met, but no display occurs.

License requirements: None.

Created in NX8.5.0

Parameters:

type - Whether a Show or Hide or both has been done

Throws:

NXException

RemoteException

fitToObjects

void fitToObjects(IFitTo[] objects)
           throws NXException,
                  RemoteException

Adjusts the bounds of a given view so that it fully encompasses the extents of the given objects. If the view is displayed, the changes will appear in the display of that view and, if enabled, the change in the bounds of the view is animated.
In batch mode, the data for the bounds of the view are changed to the adjusted bounds, but no display occurs.

License requirements: None.

Created in NX4.0.0

Parameters:

objects - The objects whose display is to be included in the displayed bounds of the view

Throws:

NXException

RemoteException

matrix

Matrix3x3 matrix()
          throws NXException,
                 RemoteException

Returns the view matrix. This 3x3 orthonormal matrix specifies the rotation from model space to untranslated view space.
License requirements: None.

Created in NX3.0.0

Throws:

NXException

RemoteException

origin

Point3d origin()
        throws NXException,
               RemoteException

Returns the view origin. This is the negation of the position in "untranslated view space", which is the coordinate space obtained by multiplying positions in absolute space by the matrix from matrix() . Note that the origin in this method is not in the same space as the origin passed to origin() and setOrigin(nxopen.Point3d) , where the input origin is in absolute space.
The position given to this property is the same as the translation used in concatenate(nxopen.Point3d) and in the other similar concatenate methods.

If you want to get the view origin in absolute space, use absoluteOrigin()

License requirements: None.

Created in NX3.0.0

Throws:

NXException

RemoteException

absoluteOrigin

Point3d absoluteOrigin()
                throws NXException,
                       RemoteException

Returns the view origin in absolute space.
License requirements: None.

Created in NX8.5.0

Throws:

NXException

RemoteException

scale

double scale()
      throws NXException,
             RemoteException

Returns the view scale
License requirements: None.

Created in NX3.0.0

Throws:

NXException

RemoteException

getAxis

Vector3d getAxis(XYZAxis xYZAxis)
          throws NXException,
                 RemoteException

Returns one of the view axes. These are the components of the 3x3 matrix which is the rotation of absolute space which results in view space.
License requirements: None.

Created in NX6.0.0

Parameters:

xYZAxis - Whether to return the X, Y or Z axis

Returns:

The X, Y or Z axis of the view

Throws:

NXException

RemoteException

makeWork

void makeWork()
       throws NXException,
              RemoteException

Makes the given view the work view. The view must be currently displayed. As there must be exactly one work view at any time, the previous work view is no longer the work view.
In batch mode, the given view becomes the work view internally, but no display occurs.

License requirements: None.

Created in NX4.0.0

Throws:

NXException

RemoteException

orient

void orient(Matrix3x3 matrix)
     throws NXException,
            RemoteException

Changes the view orientation relative to the specified absolute coordinate system. If enabled, the change in orientation of the view is animated. A view that is not displayed cannot be oriented.
In batch mode, the orientation of given view is changed internally, but no display occurs.

License requirements: None.

Created in NX3.0.0

Parameters:

matrix - Orientation relative to the absolute coordinate system. Must be orthonormal.

Throws:

NXException

RemoteException

orient

void orient(View.Canned viewName,
            View.ScaleAdjustment viewScale)
     throws NXException,
            RemoteException

Changes the view orientation to a specified canned view. If enabled, the change in orientation of the view is animated. A view that is not displayed cannot be oriented.
In batch mode, the orientation of given view is changed internally, but no display occurs.

License requirements: None.

Created in NX3.0.0

Parameters:

viewName - Canned view name

viewScale - Desired view scale

Throws:

NXException

RemoteException

orient

void orient(String viewName,
            View.ScaleAdjustment viewScale)
     throws NXException,
            RemoteException

Changes the view orientation to a specified view. If enabled, the change in orientation of the view is animated. A view that is not displayed cannot be oriented.
In batch mode, the orientation of given view is changed internally, but no display occurs.

License requirements: None.

Created in NX3.0.0

Parameters:

viewName - Custom view name

viewScale - Desired view scale

Throws:

NXException

RemoteException

regenerate

void regenerate()
         throws NXException,
                RemoteException

Regenerates the display of given view. The current scale of the view is used to determine the tessalation of curves, facets and software line fonts. The view must be already displayed.
In batch mode, internal state information is reset as if the display were regenerated, but no display occurs.

License requirements: None.

Created in NX4.0.0

Throws:

NXException

RemoteException

restore

boolean restore()
         throws NXException,
                RemoteException

Restores a view to its last remembered rotation, scale and translation. A view that is not displayed cannot be restored. If enabled, the restoration of the view is animated.
In batch mode, internal state information is restored, but no display occurs.

License requirements: None.

Created in NX3.0.0

Returns:

Status of restore operation
False - Restore successful

True - No Restore data available

Throws:

NXException

RemoteException

rotate

void rotate(Matrix3x3 matrix)
     throws NXException,
            RemoteException

Rotates the view by concatenating the given matrix to the existing rotation matrix of the view. A view that is not displayed cannot be rotated.
In batch mode, the rotation of the view is modified, but no display occurs.

License requirements: None.

Created in NX3.0.0

Parameters:

matrix - Matrix relative to the absolute coordinate system. Must be orthonormal.

Throws:

NXException

RemoteException

rotate

void rotate(Point3d origin,
            Vector3d vector,
            double angle)
     throws NXException,
            RemoteException

Rotates the specified view using the specified origin of rotation and about the specified axis. The origin and the axis are specified in absolute coordinates. A view that is not displayed cannot be rotated.
In batch mode, the rotation of the view is modified, but no display occurs.

License requirements: None.

Created in NX3.0.0

Parameters:

origin - Origin in absolute space

vector - X,Y,Z components in absolute space

angle - Angle in degrees

Throws:

NXException

RemoteException

setOrigin

void setOrigin(Point3d origin)
        throws NXException,
               RemoteException

Moves the given position to the center of the view. The position is given in absolute coordinates. The scale and rotation of the view are unchanged.
In batch mode, the origin of the view is changed internally, but no display occurs.

License requirements: None.

Created in NX4.0.0

Parameters:

origin - The new view origin

Throws:

NXException

RemoteException

setScale

void setScale(double scale)
       throws NXException,
              RemoteException

Sets the scale of the specified view to the desired scale factor.
In batch mode, the scale of the view is modified, but no display occurs.

License requirements: None.

Created in NX3.0.0

Parameters:

scale - Absolute scale factor

Throws:

NXException

RemoteException

setRotationTranslationScale

void setRotationTranslationScale(Matrix3x3 rotMatrix,
                                 Point3d translation,
                                 double scale)
                          throws NXException,
                                 RemoteException

Sets the rotation, translation and scale of the specified view. The rotation is applied first, about the absolute origin. Then the translation of the "look at" point to the view center is done, then the view is scaled about the view center.
In batch mode, the rotation, translation and scale of the view are modified, but no display occurs.

License requirements: None.

Created in NX4.0.0

Parameters:

rotMatrix - 3x3 rotation matrix to use for the view - replaces the existing view rotation matrix (is not concatenated with it

translation - Point in view space to put at the center of the view

scale - Absolute scale factor

Throws:

NXException

RemoteException

snapToClosestCannedOrientation

void snapToClosestCannedOrientation()
                             throws NXException,
                                    RemoteException

Changes the orientation of the given view to the orientation of the canned view whose orientation is the closest to that of the given view. A view that is not displayed cannot be snapped. If enabled, the change in the orientation of the view is animated.
In batch mode, the orientation of the view is changed internally, but no display occurs.

License requirements: None.

Created in NX4.0.0

Throws:

NXException

RemoteException

snapToVariantCannedOrientation

void snapToVariantCannedOrientation()
                             throws NXException,
                                    RemoteException

Similar to snapToClosestCannedOrientation() except it changes the orientation of the given view to the orientation of some canned view "variant" based on I-deas's 'snapview' logic whose orientation is the closest to one of the six orthographic and eight flavors of trimetric views.
In batch mode, the orientation of the view is changed internally, but no display occurs.

License requirements: None.

Created in NX5.0.0

Throws:

NXException

RemoteException

updateDisplay

void updateDisplay()
            throws NXException,
                   RemoteException

Updates the display of given view, as needed. The current scale of the view is used to determine the tessalation of curves, facets and software line fonts. The view must be already displayed.
In batch mode, internal state information is updated, but no display occurs.

License requirements: None.

Created in NX4.0.0

Throws:

NXException

RemoteException

zoom

void zoom(View.ScaleFactor scaleFactor)
   throws NXException,
          RemoteException

Scales the specified view to a desired relative scale. The "reduce" and "increase" scale options are fixed at 10%. All the scale options provided by View.ScaleFactor have an internal limiting factor. This scale can't be increased or decreased indefinitely. The change in view scale is not animated.
In batch mode, the scale of the view is modified, but no display occurs.

License requirements: None.

Created in NX3.0.0

Parameters:

scaleFactor - Relative scale factor

Throws:

NXException

RemoteException

zoomAboutPoint

void zoomAboutPoint(double relativeScale,
                    Point3d scaleAboutPoint,
                    Point3d viewCenter)
             throws NXException,
                    RemoteException

Scales the specified view such that the given scale_about_point does not move. If the specified scale is extremely small or extremely large, a minimum or maximum scale will be used. These are the same minimum and maximum values as used interactively. The relative_scale will be concatenated to the current scale of the view, so that 1.0 means no change of scale and 2.0 means that the scale of the view will be doubled. The scale_about_point and current_view_center are given in View Space. The view must already be displayed.
In batch mode, the scale and translation of the view are modified, but no display occurs.

License requirements: None.

Created in NX4.0.0

Parameters:

relativeScale - Relative scale [1.0 = no change]

scaleAboutPoint - The point to remain stationary, in View Space

viewCenter - The point to be considered as the view center, in View Space. This may be NULL, in which case the current view center is used.

Throws:

NXException

RemoteException

zoomByRectangle

void zoomByRectangle(Point3d corner1,
                     Point3d corner2)
              throws NXException,
                     RemoteException

Scales the specified view such that the specified rectangle is as large as possible while being fully contained within the viewport. If the rectangle and the viewport do not have the same aspect ratio, the viewport will contain some of the view not within the rectangle. If the rectangle is extremely small or extremely large, a minimum or maximum scale will be used. These are the same minimum and maximum values as used interactively. The two opposite corners of the rectangle are given in View Space. The view must already be displayed. If enabled, the change in the bounds of the view is animated.
In batch mode, the scale and translation of the view are modified, but no display occurs.

License requirements: None.

Created in NX4.0.0

Parameters:

corner1 - One corner of the rectangle, in View Space

corner2 - The opposite corner of the rectangle, in View Space

Throws:

NXException

RemoteException

changePerspective

void changePerspective(boolean changeViewToPerspective)
                throws NXException,
                       RemoteException

Changes a view from an orthographic view to a perspective view, or from a perspective view to an orthographic view. A request to change an already perspective view to a perspective view is ignored, as is a request to change an already orthographic view to an orthographic view. If the view is a drawing view or a member view on a drawing, the request is ignored.
License requirements: None.

Created in NX11.0.0

Parameters:

changeViewToPerspective -

Throws:

NXException

RemoteException

renderingStyle

View.RenderingStyleType renderingStyle()
                                throws NXException,
                                       RemoteException

Returns the rendering style of the view.
License requirements: None.

Created in NX4.0.0

Throws:

NXException

RemoteException

setRenderingStyle

void setRenderingStyle(View.RenderingStyleType renderingStyle)
                throws NXException,
                       RemoteException

Sets the rendering style of the view.
License requirements: None.

Created in NX4.0.0

Parameters:

renderingStyle -

Throws:

NXException

RemoteException

askVisibleObjects

DisplayableObject[] askVisibleObjects()
                               throws NXException,
                                      RemoteException

Returns an array of objects visible in a view
License requirements: None.

Created in NX4.0.0

Returns:

The array of visible objects

Throws:

NXException

RemoteException

updateCustomSymbols

void updateCustomSymbols()
                  throws NXException,
                         RemoteException

Updates custom symbol in a drawing member view or drawing sheet
License requirements: None.

Created in NX8.0.1

Throws:

NXException

RemoteException

lockRotations

boolean lockRotations()
               throws NXException,
                      RemoteException

Returns the "Lock Rotations" toggle state of a view. If there is no error, the current toggle state is returned
License requirements: None.

Created in NX9.0.0

Returns:

Returns current toggle state
True - Toggle is ON currently

False - Toggle is OFF currently

Throws:

NXException

RemoteException

setLockRotations

void setLockRotations(boolean newToggleState)
               throws NXException,
                      RemoteException

Sets the "Lock Rotations" toggle state of a view. If there is no error, the current toggle state is returned
License requirements: None.

Created in NX9.0.0

Parameters:

newToggleState - Sets new toggle state
True - Sets toggle ON

False - Sets toggle OFF

Throws:

NXException

RemoteException

syncViews

boolean syncViews()
           throws NXException,
                  RemoteException

Returns the "Synchronized Views" toggle state of a view. If there is no error, the current toggle state is returned
License requirements: None.

Created in NX9.0.0

Returns:

Returns current toggle state
True - Toggle is ON currently

False - Toggle is OFF currently

Throws:

NXException

RemoteException

setSyncViews

void setSyncViews(boolean newToggleState)
           throws NXException,
                  RemoteException

Sets the "Synchronized Views" toggle state of a view. If there is no error, the current toggle state is returned
License requirements: None.

Created in NX9.0.0

Parameters:

newToggleState - Sets new toggle state
True - Sets toggle ON

False - Sets toggle OFF

Throws:

NXException

RemoteException

wcsVisibility

boolean wcsVisibility()
               throws NXException,
                      RemoteException

Returns the visibility of the WCS in the view.
License requirements: None.

Created in NX10.0.0

Throws:

NXException

RemoteException

setWcsVisibility

void setWcsVisibility(boolean isVisible)
               throws NXException,
                      RemoteException

License requirements: None.

Created in NX10.0.0

Parameters:

isVisible -

Throws:

NXException

RemoteException

triadVisibility

boolean triadVisibility()
                 throws NXException,
                        RemoteException

Returns the visibility of the view triad in the view.
License requirements: None.

Created in NX10.0.0

Throws:

NXException

RemoteException

setTriadVisibility

void setTriadVisibility(boolean triadVisibility)
                 throws NXException,
                        RemoteException

Sets the visibility of the view triad in the view.
License requirements: None.

Created in NX10.0.0

Parameters:

triadVisibility -

Throws:

NXException

RemoteException