nxopen.routing

Interface CornerTypeBuilder

All Superinterfaces:

IComponentBuilder, Remote, TaggedObject

public interface CornerTypeBuilder
extends TaggedObject, IComponentBuilder

Contains setting for corner creation. Type of bend to be created and the method to create the corner.
Created in NX6.0.0

Nested Class Summary

Nested Classes

Modifier and Type	Interface and Description
static class	CornerTypeBuilder.BendMethods Methods available for bend creation.
static class	CornerTypeBuilder.BendOptions Deprecated. Deprecated in NX8.5.0. Use CornerTypeBuilder.BendMethods instead.
static class	CornerTypeBuilder.Type Defines the type of bend available for bend creation.Type of bend available are None,Miter ,Bend , S-bend and S-Elbow.

Method Summary

Modifier and Type	Method and Description
CharacteristicList	getElbowAppliedCharx() Returns the applied charx of elbow part License requirements: routing_base ("Routing Basic") .
CharacteristicList	getElbowPart() Returns the created elbow part License requirements: routing_base ("Routing Basic") .
void	importBendRadiusTable(String bendTableFilename) Imports bend radius table License requirements: routing_base ("Routing Basic") .
void	routeCornerAlternateSolution() Route alternate solution License requirements: routing_base ("Routing Basic") .
CornerTypeBuilder.BendMethods	routeCornerBendMethods() Returns the route corner bend options License requirements: routing_base ("Routing Basic") .
CornerTypeBuilder.BendOptions	routeCornerBendOptions() Deprecated. Deprecated in NX8.5.0. Use routeCornerBendMethods() instead.
void	routeCornerBendRadiusInfo() Bend corner info License requirements: routing_base ("Routing Basic") .
String	routeCornerBendTable() Returns the name of bend radius table License requirements: routing_base ("Routing Basic") .
void	routeCornerImportBendRadiusTable() Import bend radius table License requirements: routing_base ("Routing Basic") .
int	routeCornerNumberOfMiters() Returns the number of miter in mitered bend corner License requirements: routing_base ("Routing Basic") .
Expression	routeCornerRadius() Returns the route corner radius License requirements: routing_base ("Routing Basic") .
Expression	routeCornerRatioToDiameter() Returns the route corner ratio to diameter License requirements: routing_base ("Routing Basic") .
boolean	routeCornerRequireLinearSolution() Returns the route corner require linear solution License requirements: routing_base ("Routing Basic") .
void	routeCornerSpecifyElbow() Route specify elbow License requirements: routing_base ("Routing Basic") .
CornerTypeBuilder.Type	routeCornerTypeOptions() Returns the route corner type options License requirements: routing_base ("Routing Basic") .
void	setElbowAppliedCharx(CharacteristicList elbowPart) Sets the applied charx for elbow creation License requirements: routing_base ("Routing Basic") .
void	setElbowPart(CharacteristicList elbowPart) Sets the elbow part to be used for elbow creation License requirements: routing_base ("Routing Basic") .
void	setRouteCornerBendMethods(CornerTypeBuilder.BendMethods routeCornerBendMethods) License requirements: routing_base ("Routing Basic") .
void	setRouteCornerBendOptions(CornerTypeBuilder.BendOptions routeCornerBendOptions) Deprecated. Deprecated in NX8.5.0. Use setRouteCornerBendMethods(nxopen.routing.CornerTypeBuilder.BendMethods) instead.
void	setRouteCornerBendTable(String bendTableName) Sets the name of bend radius table License requirements: routing_base ("Routing Basic") .
void	setRouteCornerNumberOfMiters(int routeCornerNumberOfMiter) Sets the number of miter in mitered bend corner License requirements: routing_base ("Routing Basic") .
void	setRouteCornerRequireLinearSolution(boolean routeCornerRequireLinearSolution) License requirements: routing_base ("Routing Basic") .
void	setRouteCornerTypeOptions(CornerTypeBuilder.Type routeCornerTypeOptions) License requirements: routing_base ("Routing Basic") .

Methods inherited from interface nxopen.TaggedObject

printTestData, printTestData, tag, tagValue

Methods inherited from interface nxopen.geometricutilities.IComponentBuilder

validate

Method Detail

routeCornerTypeOptions

CornerTypeBuilder.Type routeCornerTypeOptions()
                                       throws NXException,
                                              RemoteException

Returns the route corner type options
License requirements: routing_base ("Routing Basic")
.
Created in NX6.0.0

Throws:

NXException

RemoteException

setRouteCornerTypeOptions

void setRouteCornerTypeOptions(CornerTypeBuilder.Type routeCornerTypeOptions)
                        throws NXException,
                               RemoteException

License requirements: routing_base ("Routing Basic")
.
Created in NX6.0.0

Parameters:

routeCornerTypeOptions -

Throws:

NXException

RemoteException

routeCornerBendMethods

CornerTypeBuilder.BendMethods routeCornerBendMethods()
                                              throws NXException,
                                                     RemoteException

Returns the route corner bend options
License requirements: routing_base ("Routing Basic")
.
Created in NX8.5.0

Throws:

NXException

RemoteException

setRouteCornerBendMethods

void setRouteCornerBendMethods(CornerTypeBuilder.BendMethods routeCornerBendMethods)
                        throws NXException,
                               RemoteException

License requirements: routing_base ("Routing Basic")
.
Created in NX8.5.0

Parameters:

routeCornerBendMethods -

Throws:

NXException

RemoteException

routeCornerBendOptions

CornerTypeBuilder.BendOptions routeCornerBendOptions()
                                              throws NXException,
                                                     RemoteException

Deprecated. Deprecated in NX8.5.0. Use routeCornerBendMethods() instead.

Returns the route corner bend options
License requirements: routing_base ("Routing Basic")
.
Created in NX6.0.0

Throws:

NXException

RemoteException

setRouteCornerBendOptions

void setRouteCornerBendOptions(CornerTypeBuilder.BendOptions routeCornerBendOptions)
                        throws NXException,
                               RemoteException

Deprecated. Deprecated in NX8.5.0. Use setRouteCornerBendMethods(nxopen.routing.CornerTypeBuilder.BendMethods) instead.

License requirements: routing_base ("Routing Basic")
.
Created in NX6.0.0

Parameters:

routeCornerBendOptions -

Throws:

NXException

RemoteException

routeCornerRadius

Expression routeCornerRadius()
                      throws NXException,
                             RemoteException

Returns the route corner radius
License requirements: routing_base ("Routing Basic")
.
Created in NX6.0.0

Throws:

NXException

RemoteException

routeCornerRatioToDiameter

Expression routeCornerRatioToDiameter()
                               throws NXException,
                                      RemoteException

Returns the route corner ratio to diameter
License requirements: routing_base ("Routing Basic")
.
Created in NX6.0.0

Throws:

NXException

RemoteException

routeCornerSpecifyElbow

void routeCornerSpecifyElbow()
                      throws NXException,
                             RemoteException

Route specify elbow
License requirements: routing_base ("Routing Basic")
.
Created in NX6.0.0

Throws:

NXException

RemoteException

routeCornerRequireLinearSolution

boolean routeCornerRequireLinearSolution()
                                  throws NXException,
                                         RemoteException

Returns the route corner require linear solution
License requirements: routing_base ("Routing Basic")
.
Created in NX6.0.0

Throws:

NXException

RemoteException

setRouteCornerRequireLinearSolution

void setRouteCornerRequireLinearSolution(boolean routeCornerRequireLinearSolution)
                                  throws NXException,
                                         RemoteException

License requirements: routing_base ("Routing Basic")
.
Created in NX6.0.0

Parameters:

routeCornerRequireLinearSolution -

Throws:

NXException

RemoteException

routeCornerAlternateSolution

void routeCornerAlternateSolution()
                           throws NXException,
                                  RemoteException

Route alternate solution
License requirements: routing_base ("Routing Basic")
.
Created in NX6.0.0

Throws:

NXException

RemoteException

routeCornerImportBendRadiusTable

void routeCornerImportBendRadiusTable()
                               throws NXException,
                                      RemoteException

Import bend radius table
License requirements: routing_base ("Routing Basic")
.
Created in NX6.0.0

Throws:

NXException

RemoteException

routeCornerBendRadiusInfo

void routeCornerBendRadiusInfo()
                        throws NXException,
                               RemoteException

Bend corner info
License requirements: routing_base ("Routing Basic")
.
Created in NX6.0.0

Throws:

NXException

RemoteException

routeCornerBendTable

String routeCornerBendTable()
                     throws NXException,
                            RemoteException

Returns the name of bend radius table
License requirements: routing_base ("Routing Basic")
.
Created in NX6.0.0

Throws:

NXException

RemoteException

setRouteCornerBendTable

void setRouteCornerBendTable(String bendTableName)
                      throws NXException,
                             RemoteException

Sets the name of bend radius table
License requirements: routing_base ("Routing Basic")
.
Created in NX6.0.0

Parameters:

bendTableName -

Throws:

NXException

RemoteException

getElbowPart

CharacteristicList getElbowPart()
                         throws NXException,
                                RemoteException

Returns the created elbow part
License requirements: routing_base ("Routing Basic")
.
Created in NX6.0.0

Returns:

Characteristic list used to find the appropriate

Throws:

NXException

RemoteException

setElbowPart

void setElbowPart(CharacteristicList elbowPart)
           throws NXException,
                  RemoteException

Sets the elbow part to be used for elbow creation
License requirements: routing_base ("Routing Basic")
.
Created in NX6.0.0

Parameters:

elbowPart - Characteristic list used to find the appropriate

Throws:

NXException

RemoteException

getElbowAppliedCharx

CharacteristicList getElbowAppliedCharx()
                                 throws NXException,
                                        RemoteException

Returns the applied charx of elbow part
License requirements: routing_base ("Routing Basic")
.
Created in NX6.0.0

Returns:

Characteristic list used to find the appropriate

Throws:

NXException

RemoteException

setElbowAppliedCharx

void setElbowAppliedCharx(CharacteristicList elbowPart)
                   throws NXException,
                          RemoteException

Sets the applied charx for elbow creation
License requirements: routing_base ("Routing Basic")
.
Created in NX6.0.0

Parameters:

elbowPart - Characteristic list used to find the appropriate

Throws:

NXException

RemoteException

routeCornerNumberOfMiters

int routeCornerNumberOfMiters()
                       throws NXException,
                              RemoteException

Returns the number of miter in mitered bend corner
License requirements: routing_base ("Routing Basic")
.
Created in NX8.0.0

Throws:

NXException

RemoteException

setRouteCornerNumberOfMiters

void setRouteCornerNumberOfMiters(int routeCornerNumberOfMiter)
                           throws NXException,
                                  RemoteException

Sets the number of miter in mitered bend corner
License requirements: routing_base ("Routing Basic")
.
Created in NX8.0.0

Parameters:

routeCornerNumberOfMiter -

Throws:

NXException

RemoteException

importBendRadiusTable

void importBendRadiusTable(String bendTableFilename)
                    throws NXException,
                           RemoteException

Imports bend radius table
License requirements: routing_base ("Routing Basic")
.
Created in NX9.0.2

Parameters:

bendTableFilename -

Throws:

NXException

RemoteException