Modifier and Type | Method and Description |
---|---|
UFModlFeatures.AskBallGrooveParmsData |
askBallGrooveParms(Tag featureObjId,
int edit)
Refer to UF_MODL_ask_ball_groove_parms for documentation.
|
String |
askBlendParms(Tag featureObjId,
int edit)
Refer to UF_MODL_ask_blend_parms for documentation.
|
String[] |
askBlockParms(Tag featureObjId,
int edit)
Refer to UF_MODL_ask_block_parms for documentation.
|
UFModlFeatures.AskBossParmsData |
askBossParms(Tag featureObjId,
int edit)
Refer to UF_MODL_ask_boss_parms for documentation.
|
UFModlFeatures.AskBplaneData |
askBplane(Tag featureObjId)
Refer to UF_MODL_ask_bplane for documentation.
|
UFModlFeatures.AskCBoreHoleParmsData |
askCBoreHoleParms(Tag featureObjId,
int edit)
Refer to UF_MODL_ask_c_bore_hole_parms for documentation.
|
UFModlFeatures.AskCircularPatternFaceData |
askCircularPatternFace(Tag featureTag)
Refer to UF_MODL_ask_circular_pattern_face for documentation.
|
UFModlFeatures.AskConeParmsData |
askConeParms(Tag featureObjId,
int edit)
Refer to UF_MODL_ask_cone_parms for documentation.
|
UFModlFeatures.AskCSunkHoleParmsData |
askCSunkHoleParms(Tag featureObjId,
int edit)
Refer to UF_MODL_ask_c_sunk_hole_parms for documentation.
|
UFModlFeatures.AskCurveMeshData |
askCurveMesh(Tag featureObjId)
Refer to UF_MODL_ask_curve_mesh for documentation.
|
UFModlFeatures.AskCurveMesh1Data |
askCurveMesh1(Tag featureObjId)
Refer to UF_MODL_ask_curve_mesh1 for documentation.
|
UFModlFeatures.AskCylinderParmsData |
askCylinderParms(Tag featureObjId,
int edit)
Refer to UF_MODL_ask_cylinder_parms for documentation.
|
UFModlFeatures.AskCylPocketParmsData |
askCylPocketParms(Tag featureObjId,
int edit)
Refer to UF_MODL_ask_cyl_pocket_parms for documentation.
|
UFModlFeatures.AskDatumAxisParmsData |
askDatumAxisParms(Tag featureId)
Refer to UF_MODL_ask_datum_axis_parms for documentation.
|
UFModlFeatures.AskDatumCsysComponentsData |
askDatumCsysComponents(Tag datumCsysTag)
Refer to UF_MODL_ask_datum_csys_components for documentation.
|
UFModlFeatures.AskDatumPlaneParmsData |
askDatumPlaneParms(Tag featureObjId)
Refer to UF_MODL_ask_datum_plane_parms for documentation.
|
UFModlFeatures.AskDatumPointAndDirectionData |
askDatumPointAndDirection(Tag datumFeatureTag)
Refer to UF_MODL_ask_datum_point_and_direction for documentation.
|
double |
askDaxisSize(Tag daxisTag)
Refer to UF_MODL_ask_daxis_size for documentation.
|
UFModl.EdgeBlendData |
askEdgeBlend(Tag featureEid)
Refer to UF_MODL_ask_edge_blend for documentation.
|
UFModl.EdgeBlendData |
askEdgeBlend1(Tag featureObjId)
Refer to UF_MODL_ask_edge_blend1 for documentation.
|
boolean |
askEdgeBlendIsMult(Tag featureEid)
Refer to UF_MODL_ask_edge_blend_is_mult for documentation.
|
UFModlFeatures.AskEnlargeData |
askEnlarge(Tag featObjTag)
Refer to UF_MODL_ask_enlarge for documentation.
|
UFModlFeatures.AskFaceBlendLawRadiiData |
askFaceBlendLawRadii(Tag feature)
Refer to UF_MODL_ask_face_blend_law_radii for documentation.
|
UFModlFeatures.AskFaceBlendLawRange1RadiiData |
askFaceBlendLawRange1Radii(Tag feature)
Refer to UF_MODL_ask_face_blend_law_range1_radii for documentation.
|
UFModlFeatures.AskFaceBlendLawRange2RadiiData |
askFaceBlendLawRange2Radii(Tag feature)
Refer to UF_MODL_ask_face_blend_law_range2_radii for documentation.
|
UFModlFeatures.AskFaceConstraintData |
askFaceConstraint(Tag featureTag)
Refer to UF_MODL_ask_face_constraint for documentation.
|
int |
askFreeFormResult()
Refer to UF_MODL_ask_free_form_result for documentation.
|
UFModlFeatures.AskHollowData |
askHollowData(Tag featureId,
int type)
Refer to UF_MODL_ask_hollow_data for documentation.
|
String |
askHollowParms(Tag featureObjId,
int edit)
Refer to UF_MODL_ask_hollow_parms for documentation.
|
UFModlFeatures.AskImprEdgesData |
askImprEdges(Tag featureTag)
Refer to UF_MODL_ask_impr_edges for documentation.
|
UFModl.ImprintFacesData |
askImprFacesParms(Tag featureTag)
Refer to UF_MODL_ask_impr_faces_parms for documentation.
|
UFModl.ImprintLoopData |
askImprLoopParms(Tag featureTag)
Refer to UF_MODL_ask_impr_loop_parms for documentation.
|
UFModlFeatures.AskLocalScaleData |
askLocalScale(Tag featureTag)
Refer to UF_MODL_ask_local_scale for documentation.
|
int |
askMidsrfFeatureCreateMethod(Tag featureObjId)
Refer to UF_MODL_ask_midsrf_feature_create_method for documentation.
|
Tag[] |
askMidsrfParms(Tag featureObjId)
Refer to UF_MODL_ask_midsrf_parms for documentation.
|
UFModlFeatures.AskMirrorPatternFaceData |
askMirrorPatternFace(Tag featureTag)
Refer to UF_MODL_ask_mirror_pattern_face for documentation.
|
UFModlFeatures.AskMoveRegionData |
askMoveRegion(Tag featureTag)
Refer to UF_MODL_ask_move_region for documentation.
|
UFModlFeatures.AskOffsetRegionData |
askOffsetRegion(Tag featureTag)
Refer to UF_MODL_ask_offset_region for documentation.
|
UFModl.QuiltType |
askQuiltType(Tag quiltTag)
Refer to UF_MODL_ask_quilt_type for documentation.
|
UFModl.ReblendFaceData |
askReblendFace(Tag featureEid)
Refer to UF_MODL_ask_reblend_face for documentation.
|
UFModlFeatures.AskRectangularPatternFaceData |
askRectangularPatternFace(Tag featureTag)
Refer to UF_MODL_ask_rectangular_pattern_face for documentation.
|
UFModlFeatures.AskRectGrooveParmsData |
askRectGrooveParms(Tag featureObjId,
int edit)
Refer to UF_MODL_ask_rect_groove_parms for documentation.
|
UFModlFeatures.AskRectPadParmsData |
askRectPadParms(Tag featureObjId,
int edit)
Refer to UF_MODL_ask_rect_pad_parms for documentation.
|
UFModlFeatures.AskRectPadParms1Data |
askRectPadParms1(Tag featureObjId,
int edit)
Refer to UF_MODL_ask_rect_pad_parms_1 for documentation.
|
UFModlFeatures.AskRectPocketParmsData |
askRectPocketParms(Tag featureObjId,
int edit)
Refer to UF_MODL_ask_rect_pocket_parms for documentation.
|
UFModl.RefitFaceData |
askRefitFaceFeatureData(Tag refit)
Refer to UF_MODL_ask_refit_face_feature_data for documentation.
|
UFModlFeatures.AskReplaceFaceData |
askReplaceFace(Tag featureTag)
Refer to UF_MODL_ask_replace_face for documentation.
|
UFModlFeatures.AskResizeFaceData |
askResizeFace(Tag featureTag)
Refer to UF_MODL_ask_resize_face for documentation.
|
UFModl.RoughOffset |
askRoughOffset(Tag featureTag)
Refer to UF_MODL_ask_rough_offset for documentation.
|
UFModlFeatures.AskRuledData |
askRuled(Tag featureObjId)
Refer to UF_MODL_ask_ruled for documentation.
|
UFModlFeatures.AskRuled1Data |
askRuled1(Tag featureObjId)
Refer to UF_MODL_ask_ruled1 for documentation.
|
UFModlFeatures.AskSimpleHoleParmsData |
askSimpleHoleParms(Tag featureObjId,
int edit)
Refer to UF_MODL_ask_simple_hole_parms for documentation.
|
UFModl.SimplData |
askSimplifyParms(Tag featureTag)
Refer to UF_MODL_ask_simplify_parms for documentation.
|
UFModl.SnipsrfFeatureData |
askSnipSurfaceFeatureData(Tag snip)
Refer to UF_MODL_ask_snip_surface_feature_data for documentation.
|
String |
askSphereParms(Tag featureObjId,
int edit)
Refer to UF_MODL_ask_sphere_parms for documentation.
|
UFModl.StycornerData |
askStycornerData(Tag frecTag)
Refer to UF_MODL_ask_stycorner_data for documentation.
|
UFModlFeatures.AskSweepData |
askSweep(Tag featureObjId)
Refer to UF_MODL_ask_sweep for documentation.
|
UFModlFeatures.AskTaperFromEdgesData |
askTaperFromEdges(Tag featureEid)
Refer to UF_MODL_ask_taper_from_edges for documentation.
|
UFModlFeatures.AskTaperFromEdges1Data |
askTaperFromEdges1(Tag featureObjId)
Refer to UF_MODL_ask_taper_from_edges1 for documentation.
|
UFModlFeatures.AskTaperHoleParmsData |
askTaperHoleParms(Tag featureObjId,
int edit)
Refer to UF_MODL_ask_taper_hole_parms for documentation.
|
String |
askTaperParms(Tag featureObjId,
int edit)
Refer to UF_MODL_ask_taper_parms for documentation.
|
UFModlFeatures.AskThruCurvesData |
askThruCurves(Tag featureObjId)
Refer to UF_MODL_ask_thru_curves for documentation.
|
UFModlFeatures.AskThruCurves1Data |
askThruCurves1(Tag featureObjId)
Refer to UF_MODL_ask_thru_curves1 for documentation.
|
UFModlFeatures.AskUGrooveParmsData |
askUGrooveParms(Tag featureObjId,
int edit)
Refer to UF_MODL_ask_u_groove_parms for documentation.
|
Tag |
askXformTagOfDatumCsys(Tag datumCsysTag)
Refer to UF_MODL_ask_xform_tag_of_datum_csys for documentation.
|
void |
autoMidsrfFeature(Tag featureObjId)
Refer to UF_MODL_auto_midsrf_feature for documentation.
|
void |
autoMidsrfFeatureWOpts(Tag featureObjId,
int autopairoptions,
double autoval)
Refer to UF_MODL_auto_midsrf_feature_w_opts for documentation.
|
void |
changeOffsetBaseFace(Tag offsetFeature,
Tag newBaseFace)
Refer to UF_MODL_change_offset_base_face for documentation.
|
void |
convertToFixedDatum(Tag datumFeatureTag)
Refer to UF_MODL_convert_to_fixed_datum for documentation.
|
Tag |
createBallGroove(double[] location,
double[] direction,
String diame,
String width,
Tag face)
Refer to UF_MODL_create_ball_groove for documentation.
|
Tag |
createBlend(String radius,
Tag[] edgeList,
int smoothOverflow,
int cliffOverflow,
int notchOverflow,
double vrbTool)
Refer to UF_MODL_create_blend for documentation.
|
Tag |
createBlock(UFModl.FeatureSigns sign,
Tag targTag,
double[] cornerPt,
String[] edgeLen)
Refer to UF_MODL_create_block for documentation.
|
Tag |
createBlock1(UFModl.FeatureSigns sign,
double[] cornerPt,
String[] edgeLen)
Refer to UF_MODL_create_block1 for documentation.
|
Tag |
createBoss(double[] location,
double[] direction,
String diame,
String height,
String angle,
Tag face)
Refer to UF_MODL_create_boss for documentation.
|
Tag |
createBplane(UFModl.StringList sSection,
double[] tol)
Refer to UF_MODL_create_bplane for documentation.
|
Tag |
createBridgeFace(int continuityType,
int guideType,
Tag[] primaryFaces,
Tag[] primaryEdges,
int primaryEdgesDir,
UFModl.StringList sideString1,
UFModl.StringList sideString2,
Tag[] sideFaces,
Tag[] sideEdges)
Refer to UF_MODL_create_bridge_face for documentation.
|
Tag |
createCBoreHole(double[] location,
double[] direction,
String diameter1,
String depth1,
String diameter2,
String depth2,
String angle,
Tag faceLi,
Tag faceT1)
Refer to UF_MODL_create_c_bore_hole for documentation.
|
Tag |
createCircularPatternFace(UFModl.DfoRegion region,
Tag axis,
int nPattern,
String angle)
Refer to UF_MODL_create_circular_pattern_face for documentation.
|
Tag |
createCone(UFModl.FeatureSigns sign,
Tag targTag,
double[] origin,
String height,
String[] diam,
double[] direction)
Refer to UF_MODL_create_cone for documentation.
|
Tag |
createCone1(UFModl.FeatureSigns sign,
double[] origin,
String height,
String[] diam,
double[] direction)
Refer to UF_MODL_create_cone1 for documentation.
|
Tag |
createCSunkHole(double[] location,
double[] direction,
String diameter1,
String depth1,
String diameter2,
String csinkAngle,
String angle,
Tag faceLi,
Tag faceT1)
Refer to UF_MODL_create_c_sunk_hole for documentation.
|
Tag |
createCurveMesh(UFModl.StringList sPrim,
UFModl.StringList sCross,
UFModl.StringList sSpine,
int endPoint,
int emphasis,
int bodyType,
int splinePts,
UFModl.FeatureSigns booleanArg,
double[] tol,
Tag[] cFaceId,
int[] cFlag)
Refer to UF_MODL_create_curve_mesh for documentation.
|
Tag |
createCyl1(UFModl.FeatureSigns sign,
double[] origin,
String height,
String diam,
double[] direction)
Refer to UF_MODL_create_cyl1 for documentation.
|
Tag |
createCylinder(UFModl.FeatureSigns sign,
Tag targTag,
double[] origin,
String height,
String diam,
double[] direction)
Refer to UF_MODL_create_cylinder for documentation.
|
Tag |
createCylPocket(double[] location,
double[] direction,
String diame,
String depth,
String radius,
String angle,
Tag face)
Refer to UF_MODL_create_cyl_pocket for documentation.
|
Tag |
createDatumCsys(Tag objectInPart,
Tag xformTag,
boolean createComponents)
Refer to UF_MODL_create_datum_csys for documentation.
|
Tag |
createDatumCsysOffset(Tag objectInPart,
Tag parentDatumCsysTag,
double[] linearOffset,
double[] angularOffset,
boolean createComponents)
Refer to UF_MODL_create_datum_csys_offset for documentation.
|
Tag |
createEdgeBlend(UFModl.EdgeBlendData blendData)
Refer to UF_MODL_create_edge_blend for documentation.
|
Tag |
createEdgeBlendMult(UFModl.EdgeBlendMultData blendData)
Refer to UF_MODL_create_edge_blend_mult for documentation.
|
Tag |
createEnlarge(Tag face,
int type,
String[] percentSize,
double tolerance)
Refer to UF_MODL_create_enlarge for documentation.
|
Tag |
createFaceConstraint(UFModl.DfoRegion region,
UFModl.DfoConstraint constraint)
Refer to UF_MODL_create_face_constraint for documentation.
|
Tag |
createFaceTaper(double[] location,
double[] direction,
String angle,
Tag[] faces)
Refer to UF_MODL_create_face_taper for documentation.
|
Tag |
createFeatureTaper(double[] location,
double[] direction,
String angle,
Tag originalFeature)
Refer to UF_MODL_create_feature_taper for documentation.
|
Tag |
createFixedDaxis(double[] point1,
double[] point2)
Refer to UF_MODL_create_fixed_daxis for documentation.
|
Tag |
createFixedDplane(double[] point,
double[] direction)
Refer to UF_MODL_create_fixed_dplane for documentation.
|
Tag |
createFrenetDaxis(Tag curveTag,
Tag directionTag,
String percString,
int directionType)
Refer to UF_MODL_create_frenet_daxis for documentation.
|
Tag |
createHollow(String thickness,
Tag[] faces)
Refer to UF_MODL_create_hollow for documentation.
|
Tag |
createImprFaces(UFModl.ImprintFacesData parms)
Refer to UF_MODL_create_impr_faces for documentation.
|
Tag |
createImprLoop(UFModl.ImprintLoopData parms)
Refer to UF_MODL_create_impr_loop for documentation.
|
Tag |
createLocalScale(UFModl.DfoScaleType type,
UFModl.DfoRegion region,
Tag soPoint,
Tag soDir,
Tag soCsys,
String[] factors)
Refer to UF_MODL_create_local_scale for documentation.
|
Tag |
createMidsrfFeature(Tag targetBody)
Refer to UF_MODL_create_midsrf_feature for documentation.
|
Tag |
createMirrorPatternFace(UFModl.DfoRegion region,
Tag mirrorPlane)
Refer to UF_MODL_create_mirror_pattern_face for documentation.
|
Tag |
createOffsetRegion(UFModl.DfoRegion region,
String offset)
Refer to UF_MODL_create_offset_region for documentation.
|
Tag |
createPointDirrDaxis(Tag point,
Tag direction)
Refer to UF_MODL_create_point_dirr_daxis for documentation.
|
Tag |
createPointDirrDplane(Tag point,
Tag direction)
Refer to UF_MODL_create_point_dirr_dplane for documentation.
|
Tag |
createReblendFace(UFModl.ReblendFaceData reblendData)
Refer to UF_MODL_create_reblend_face for documentation.
|
Tag |
createRectangularPatternFace(UFModl.DfoRegion region,
Tag xAxis,
Tag yAxis,
int numX,
int numY,
String xOffset,
String yOffset)
Refer to UF_MODL_create_rectangular_pattern_face for documentation.
|
Tag |
createRectGroove(double[] location,
double[] direction,
String diame,
String width,
Tag face)
Refer to UF_MODL_create_rect_groove for documentation.
|
Tag |
createRectPad(double[] location,
double[] direction,
double[] xDir,
String[] size,
String radius,
String angle,
Tag face)
Refer to UF_MODL_create_rect_pad for documentation.
|
Tag |
createRectPocket(double[] location,
double[] direction,
double[] xDir,
String[] len,
String corner,
String floor,
String angle,
Tag face)
Refer to UF_MODL_create_rect_pocket for documentation.
|
Tag |
createRefitFaceFeature(UFModl.RefitFaceData refitData)
Refer to UF_MODL_create_refit_face_feature for documentation.
|
Tag |
createRelativeDaxis(int numRefs,
Tag[] objEids,
int[] pointSelect)
Refer to UF_MODL_create_relative_daxis for documentation.
|
UFModlFeatures.CreateRelativeDplaneData |
createRelativeDplane(int numRefs,
Tag[] objectTags,
int[] pointSelect,
int whichPlane,
double[] referencePoint,
String angleString,
String offsetString)
Refer to UF_MODL_create_relative_dplane for documentation.
|
UFModlFeatures.CreateReparamSheetData |
createReparamSheet(int projType,
int drvType,
int checkOverlap,
int numPrimary,
Tag[] primCvs,
int numCross,
Tag[] crosCvs,
double projVec,
int numFs,
Tag[] faces,
double[] tols)
Refer to UF_MODL_create_reparam_sheet for documentation.
|
Tag |
createReplaceFace(Tag[] targetFaces,
int numTarget,
Tag[] nonBlendFaces,
int numNonBlend,
Tag toolFace,
boolean reverseDirection)
Refer to UF_MODL_create_replace_face for documentation.
|
Tag |
createResizeFace(Tag[] targetFaces,
int numTarget,
Tag[] nonBlendFaces,
int numNonBlend,
String newParameter)
Refer to UF_MODL_create_resize_face for documentation.
|
Tag |
createRoughOffset(UFModl.RoughOffset parms)
Refer to UF_MODL_create_rough_offset for documentation.
|
Tag |
createRuled(UFModl.StringList sSection,
UFModl.StringList sSpine,
int alignment,
double[] value,
int endPoint,
int bodyType,
UFModl.FeatureSigns booleanArg,
double[] tol)
Refer to UF_MODL_create_ruled for documentation.
|
Tag |
createRuled1(UFModl.StringList sSection,
UFModl.StringList sSpine,
int alignment,
double[] value,
int endPoint,
int bodyType,
UFModl.FeatureSigns booleanArg,
Tag targetBody,
double[] tol)
Refer to UF_MODL_create_ruled1 for documentation.
|
Tag |
createSimpleHole(double[] location,
double[] direction,
String diame,
String depth,
String angle,
Tag faceLi,
Tag faceT1)
Refer to UF_MODL_create_simple_hole for documentation.
|
UFModlFeatures.CreateSimplifyData |
createSimplify(UFModl.SimplData simplParms)
Refer to UF_MODL_create_simplify for documentation.
|
Tag |
createSnipSurfaceFeature(UFModl.SnipsrfFeatureData usrData)
Refer to UF_MODL_create_snip_surface_feature for documentation.
|
Tag |
createSphere(UFModl.FeatureSigns sign,
Tag targTag,
double[] center,
String diam)
Refer to UF_MODL_create_sphere for documentation.
|
Tag |
createSphere1(UFModl.FeatureSigns sign,
double[] center,
String diam)
Refer to UF_MODL_create_sphere1 for documentation.
|
Tag |
createStycorner(UFModl.StycornerData styledCornerData)
Refer to UF_MODL_create_stycorner for documentation.
|
UFModlFeatures.CreateSurfFromCloudData |
createSurfFromCloud(int pointCnt,
double[][] cloud,
double[][] csysMatrix,
double[][] bndCorners,
int uDegree,
int vDegree,
int uPatches,
int vPatches,
int cornerSwitch)
Refer to UF_MODL_create_surf_from_cloud for documentation.
|
Tag |
createSweep(UFModl.StringList sGuide,
UFModl.StringList sSection,
UFModl.StringList sSpine,
UFModl.MethodList orientation,
UFModl.MethodList scaling,
int alignment,
int inter,
int bodyType,
UFModl.FeatureSigns booleanArg,
double[] tol)
Refer to UF_MODL_create_sweep for documentation.
|
Tag |
createTaperFromEdges(Tag directionTag,
String angleStr,
boolean taperAllInstances,
int numEdges,
Tag[] edges)
Refer to UF_MODL_create_taper_from_edges for documentation.
|
Tag |
createTaperFromFaces(Tag pointTag,
Tag directionTag,
String angleStr,
boolean taperAllInstances,
int numFaces,
Tag[] faces)
Refer to UF_MODL_create_taper_from_faces for documentation.
|
Tag |
createTaperFromTangentFaces(Tag directionTag,
String angleStr,
boolean taperAllInstances,
int numFaces,
Tag[] faces)
Refer to UF_MODL_create_taper_from_tangent_faces for documentation.
|
Tag |
createTaperSplitLine(Tag pointTag,
Tag directionTag,
String angleStr,
boolean taperAllInstances,
int numEdges,
Tag[] edges,
double distTol,
double angleTol)
Refer to UF_MODL_create_taper_split_line for documentation.
|
Tag |
createThruCurves(UFModl.StringList sSection,
UFModl.StringList sSpine,
int patch,
int alignment,
double[] value,
int vdegree,
int vstatus,
int bodyType,
UFModl.FeatureSigns booleanArg,
double[] tol,
Tag[] cFaceId,
int[] cFlag)
Refer to UF_MODL_create_thru_curves for documentation.
|
Tag |
createTrueTaperFromEdges(Tag directionTag,
String angleStr,
boolean taperAllInstances,
int numEdges,
Tag[] edges,
double distTol,
double angleTol)
Refer to UF_MODL_create_true_taper_from_edges for documentation.
|
Tag |
createUGroove(double[] location,
double[] direction,
String diame,
String width,
String corner,
Tag face)
Refer to UF_MODL_create_u_groove for documentation.
|
Tag |
createVariableHollow(double tolerance,
String thickness,
int nPiercedFaces,
Tag[] piercedFaces,
int nBoundaryFaces,
Tag[] boundaryFaces,
int nOffsetFaces,
Tag[] offsetFaces,
String[] offsetThickness)
Refer to UF_MODL_create_variable_hollow for documentation.
|
Tag |
createVariableOffset(Tag baseSheet,
String[] dist,
double[] uvParam)
Refer to UF_MODL_create_variable_offset for documentation.
|
Tag |
createVariableTaperFromEdges(Tag directionTag,
String angleStr,
boolean taperAllInstances,
int numEdges,
Tag[] edges,
int numPoints,
double[] points,
String[] angles,
double distTol,
double angleTol)
Refer to UF_MODL_create_variable_taper_from_edges for documentation.
|
void |
dumpMidsurfFacepairReport(String fileNameWithExtn,
Tag midsrfFeatureObjId)
Refer to UF_MODL_dump_midsurf_facepair_report for documentation.
|
void |
editCircularPatternFace(Tag featureTag,
UFModl.DfoRegion region,
Tag axis,
int nPattern,
String angle)
Refer to UF_MODL_edit_circular_pattern_face for documentation.
|
void |
editDatumDirection(Tag datumFeatureTag,
Tag newDirection)
Refer to UF_MODL_edit_datum_direction for documentation.
|
void |
editDatumPoint(Tag datumFeatureTag,
Tag newPoint)
Refer to UF_MODL_edit_datum_point for documentation.
|
void |
editEdgeBlend(Tag featureEid,
UFModl.EdgeBlendData blendData)
Refer to UF_MODL_edit_edge_blend for documentation.
|
void |
editEdgeBlendMult(Tag featureEid,
UFModl.EdgeBlendMultData blendData)
Refer to UF_MODL_edit_edge_blend_mult for documentation.
|
void |
editEnlarge(Tag featObjTag,
int type,
String[] percentSize,
double tolerance)
Refer to UF_MODL_edit_enlarge for documentation.
|
void |
editFaceConstraint(Tag featureTag,
UFModl.DfoRegion region,
UFModl.DfoConstraint constraint)
Refer to UF_MODL_edit_face_constraint for documentation.
|
void |
editHoleType(Tag holeFeature,
UFModl.HoleType newHoleType)
Refer to UF_MODL_edit_hole_type for documentation.
|
void |
editHollow(Tag featureId,
int type,
double tolerance,
String thickness,
int nPiercedFaces,
Tag[] piercedFaces,
int nBoundaryFaces,
Tag[] boundaryFaces,
int nOffsetFaces,
Tag[] offsetFaces,
String[] offsetThickness)
Refer to UF_MODL_edit_hollow for documentation.
|
void |
editImprFacesParms(Tag featureTag,
UFModl.ImprintFacesData parms)
Refer to UF_MODL_edit_impr_faces_parms for documentation.
|
void |
editImprLoopParms(Tag featureTag,
UFModl.ImprintLoopData parms)
Refer to UF_MODL_edit_impr_loop_parms for documentation.
|
void |
editLocalScale(Tag featureTag,
UFModl.DfoScaleType type,
UFModl.DfoRegion region,
Tag soPoint,
Tag soDir,
Tag soCsys,
String[] factors)
Refer to UF_MODL_edit_local_scale for documentation.
|
void |
editMirrorPatternFace(Tag featureTag,
UFModl.DfoRegion region,
Tag mirrorPlane)
Refer to UF_MODL_edit_mirror_pattern_face for documentation.
|
void |
editOffsetRegion(Tag featureTag,
UFModl.DfoRegion region,
String offset)
Refer to UF_MODL_edit_offset_region for documentation.
|
void |
editReblendFace(Tag featureEid,
UFModl.ReblendFaceData reblendData)
Refer to UF_MODL_edit_reblend_face for documentation.
|
void |
editRectangularPatternFace(Tag featureTag,
UFModl.DfoRegion region,
Tag xAxis,
Tag yAxis,
int numX,
int numY,
String xOffset,
String yOffset)
Refer to UF_MODL_edit_rectangular_pattern_face for documentation.
|
void |
editRefitFaceFeature(UFModl.RefitFaceData refitData,
Tag refit)
Refer to UF_MODL_edit_refit_face_feature for documentation.
|
void |
editReplaceFace(Tag featureTag,
Tag[] targetFaces,
int numTarget,
Tag[] nonBlendFaces,
int numNonBlend,
Tag toolFace,
boolean reverseDirection)
Refer to UF_MODL_edit_replace_face for documentation.
|
void |
editResizeFace(Tag featureTag,
Tag[] targetFaces,
int numTarget,
Tag[] nonBlendFaces,
int numNonBlend,
String newParameter)
Refer to UF_MODL_edit_resize_face for documentation.
|
void |
editRoughOffset(Tag featureTag,
UFModl.RoughOffset parms)
Refer to UF_MODL_edit_rough_offset for documentation.
|
UFModlFeatures.EditSimplifyParmsData |
editSimplifyParms(Tag featureTag,
UFModl.SimplData simplParms)
Refer to UF_MODL_edit_simplify_parms for documentation.
|
void |
editSnipSurfaceFeature(UFModl.SnipsrfFeatureData usrData,
Tag snip)
Refer to UF_MODL_edit_snip_surface_feature for documentation.
|
void |
editStycorner(UFModl.StycornerData styledCornerData,
Tag frecTag)
Refer to UF_MODL_edit_stycorner for documentation.
|
void |
editTaperFromEdges(Tag featureEid,
int type,
Tag directionTag,
String angleStr,
boolean taperAllInstances,
int numEdges,
Tag[] edges,
double distTol,
double angleTol)
Refer to UF_MODL_edit_taper_from_edges for documentation.
|
Tag |
extractFace(Tag face,
int mode)
Refer to UF_MODL_extract_face for documentation.
|
void |
initEdgeBlendMult(UFModl.EdgeBlendMultData blendData)
Refer to UF_MODL_init_edge_blend_mult for documentation.
|
void |
initEdgeBlendPointMult(UFModl.BlendPointData pointData)
Refer to UF_MODL_init_edge_blend_point_mult for documentation.
|
void |
initEdgeBlendSetbackMult(UFModl.EdgeBlendSetbackData sbData)
Refer to UF_MODL_init_edge_blend_setback_mult for documentation.
|
void |
initEdgeBlendSetMult(UFModl.EdgeBlendSet blendSet)
Refer to UF_MODL_init_edge_blend_set_mult for documentation.
|
void |
initEdgeBlendStopshortMult(UFModl.EdgeBlendStopshortData ssData)
Refer to UF_MODL_init_edge_blend_stopshort_mult for documentation.
|
UFModl.StycornerData |
initStycornerData(UFModl.StycornerData styledCornerData)
Refer to UF_MODL_init_stycorner_data for documentation.
|
boolean |
isDatumAxisReversed(Tag datumAxisTag)
Refer to UF_MODL_is_datum_axis_reversed for documentation.
|
boolean |
isDatumPlaneReversed(Tag datumPlaneTag)
Refer to UF_MODL_is_datum_plane_reversed for documentation.
|
UFModlFeatures.IsodivideFaceData |
isodivideFace(Tag sheetId,
double divParam,
int divDir)
Refer to UF_MODL_isodivide_face for documentation.
|
Tag |
isotrimFace(Tag sheetId,
double[] trimParam)
Refer to UF_MODL_isotrim_face for documentation.
|
double |
matchedgeCheck(UFModl.MatchedgeData ufData,
int continuity,
int numPnts)
Refer to UF_MODL_matchedge_check for documentation.
|
Tag |
matchedgeCreateFeature(UFModl.MatchedgeData ufData)
Refer to UF_MODL_matchedge_create_feature for documentation.
|
void |
matchedgeEditFeature(UFModl.MatchedgeData ufData,
Tag frecTag)
Refer to UF_MODL_matchedge_edit_feature for documentation.
|
void |
reverseDatumAxis(Tag datumAxisTag)
Refer to UF_MODL_reverse_datum_axis for documentation.
|
void |
reverseDatumPlane(Tag datumPlaneTag)
Refer to UF_MODL_reverse_datum_plane for documentation.
|
void |
setDatumCsysScaling(Tag datumCsysTag,
boolean scalingOn)
Refer to UF_MODL_set_datum_csys_scaling for documentation.
|
void |
setDatumCsysVisibility(Tag datumCsysTag,
boolean visibility)
Refer to UF_MODL_set_datum_csys_visibility for documentation.
|
void |
setFaceBlendLawRadii(Tag feature,
double[] radiiValues,
int radNum)
Refer to UF_MODL_set_face_blend_law_radii for documentation.
|
void |
setFaceBlendLawRange1Radii(Tag feature,
double[] radiiValues,
int radNum)
Refer to UF_MODL_set_face_blend_law_range1_radii for documentation.
|
void |
setFaceBlendLawRange2Radii(Tag feature,
double[] radiiValues,
int radNum)
Refer to UF_MODL_set_face_blend_law_range2_radii for documentation.
|
void |
setFreeFormResult(int freeFormResult)
Refer to UF_MODL_set_free_form_result for documentation.
|
void |
setMidsrfFeatureCreateMethod(Tag featureObjId,
int advCrtAndTrm)
Refer to UF_MODL_set_midsrf_feature_create_method for documentation.
|
void |
setXformTagOfDatumCsys(Tag datumCsysFeature,
Tag xformTag)
Refer to UF_MODL_set_xform_tag_of_datum_csys for documentation.
|
void |
trimMidsrfFeature(Tag midsrfFeatureObjId)
Refer to UF_MODL_trim_midsrf_feature for documentation.
|
void |
unregisterCliffBlend()
Refer to UF_MODL_unregister_cliff_blend for documentation.
|
void |
unregisterVarBlend()
Refer to UF_MODL_unregister_var_blend for documentation.
|
Tag createSweep(UFModl.StringList sGuide, UFModl.StringList sSection, UFModl.StringList sSpine, UFModl.MethodList orientation, UFModl.MethodList scaling, int alignment, int inter, int bodyType, UFModl.FeatureSigns booleanArg, double[] tol) throws NXException, RemoteException
NXException
RemoteException
UFModlFeatures.AskSweepData askSweep(Tag featureObjId) throws NXException, RemoteException
NXException
RemoteException
UFModl.QuiltType askQuiltType(Tag quiltTag) throws NXException, RemoteException
NXException
RemoteException
Tag createBridgeFace(int continuityType, int guideType, Tag[] primaryFaces, Tag[] primaryEdges, int primaryEdgesDir, UFModl.StringList sideString1, UFModl.StringList sideString2, Tag[] sideFaces, Tag[] sideEdges) throws NXException, RemoteException
NXException
RemoteException
UFModlFeatures.CreateSurfFromCloudData createSurfFromCloud(int pointCnt, double[][] cloud, double[][] csysMatrix, double[][] bndCorners, int uDegree, int vDegree, int uPatches, int vPatches, int cornerSwitch) throws NXException, RemoteException
NXException
RemoteException
Tag createMidsrfFeature(Tag targetBody) throws NXException, RemoteException
NXException
RemoteException
void autoMidsrfFeature(Tag featureObjId) throws NXException, RemoteException
NXException
RemoteException
void autoMidsrfFeatureWOpts(Tag featureObjId, int autopairoptions, double autoval) throws NXException, RemoteException
NXException
RemoteException
Tag[] askMidsrfParms(Tag featureObjId) throws NXException, RemoteException
NXException
RemoteException
void trimMidsrfFeature(Tag midsrfFeatureObjId) throws NXException, RemoteException
NXException
RemoteException
void dumpMidsurfFacepairReport(String fileNameWithExtn, Tag midsrfFeatureObjId) throws NXException, RemoteException
NXException
RemoteException
int askMidsrfFeatureCreateMethod(Tag featureObjId) throws NXException, RemoteException
NXException
RemoteException
void setMidsrfFeatureCreateMethod(Tag featureObjId, int advCrtAndTrm) throws NXException, RemoteException
NXException
RemoteException
Tag createRuled(UFModl.StringList sSection, UFModl.StringList sSpine, int alignment, double[] value, int endPoint, int bodyType, UFModl.FeatureSigns booleanArg, double[] tol) throws NXException, RemoteException
NXException
RemoteException
Tag createRuled1(UFModl.StringList sSection, UFModl.StringList sSpine, int alignment, double[] value, int endPoint, int bodyType, UFModl.FeatureSigns booleanArg, Tag targetBody, double[] tol) throws NXException, RemoteException
NXException
RemoteException
UFModlFeatures.AskRuledData askRuled(Tag featureObjId) throws NXException, RemoteException
NXException
RemoteException
Tag createCurveMesh(UFModl.StringList sPrim, UFModl.StringList sCross, UFModl.StringList sSpine, int endPoint, int emphasis, int bodyType, int splinePts, UFModl.FeatureSigns booleanArg, double[] tol, Tag[] cFaceId, int[] cFlag) throws NXException, RemoteException
NXException
RemoteException
UFModlFeatures.AskCurveMeshData askCurveMesh(Tag featureObjId) throws NXException, RemoteException
NXException
RemoteException
Tag createThruCurves(UFModl.StringList sSection, UFModl.StringList sSpine, int patch, int alignment, double[] value, int vdegree, int vstatus, int bodyType, UFModl.FeatureSigns booleanArg, double[] tol, Tag[] cFaceId, int[] cFlag) throws NXException, RemoteException
NXException
RemoteException
UFModlFeatures.AskThruCurvesData askThruCurves(Tag featureObjId) throws NXException, RemoteException
NXException
RemoteException
Tag createVariableOffset(Tag baseSheet, String[] dist, double[] uvParam) throws NXException, RemoteException
NXException
RemoteException
void changeOffsetBaseFace(Tag offsetFeature, Tag newBaseFace) throws NXException, RemoteException
NXException
RemoteException
Tag isotrimFace(Tag sheetId, double[] trimParam) throws NXException, RemoteException
NXException
RemoteException
UFModlFeatures.IsodivideFaceData isodivideFace(Tag sheetId, double divParam, int divDir) throws NXException, RemoteException
NXException
RemoteException
UFModlFeatures.CreateReparamSheetData createReparamSheet(int projType, int drvType, int checkOverlap, int numPrimary, Tag[] primCvs, int numCross, Tag[] crosCvs, double projVec, int numFs, Tag[] faces, double[] tols) throws NXException, RemoteException
NXException
RemoteException
void setFreeFormResult(int freeFormResult) throws NXException, RemoteException
NXException
RemoteException
int askFreeFormResult() throws NXException, RemoteException
NXException
RemoteException
Tag createEnlarge(Tag face, int type, String[] percentSize, double tolerance) throws NXException, RemoteException
NXException
RemoteException
void editEnlarge(Tag featObjTag, int type, String[] percentSize, double tolerance) throws NXException, RemoteException
NXException
RemoteException
UFModlFeatures.AskEnlargeData askEnlarge(Tag featObjTag) throws NXException, RemoteException
NXException
RemoteException
Tag createRoughOffset(UFModl.RoughOffset parms) throws NXException, RemoteException
NXException
RemoteException
void editRoughOffset(Tag featureTag, UFModl.RoughOffset parms) throws NXException, RemoteException
NXException
RemoteException
UFModl.RoughOffset askRoughOffset(Tag featureTag) throws NXException, RemoteException
NXException
RemoteException
UFModlFeatures.AskCurveMesh1Data askCurveMesh1(Tag featureObjId) throws NXException, RemoteException
NXException
RemoteException
UFModlFeatures.AskThruCurves1Data askThruCurves1(Tag featureObjId) throws NXException, RemoteException
NXException
RemoteException
UFModlFeatures.AskRuled1Data askRuled1(Tag featureObjId) throws NXException, RemoteException
NXException
RemoteException
Tag matchedgeCreateFeature(UFModl.MatchedgeData ufData) throws NXException, RemoteException
NXException
RemoteException
void matchedgeEditFeature(UFModl.MatchedgeData ufData, Tag frecTag) throws NXException, RemoteException
NXException
RemoteException
double matchedgeCheck(UFModl.MatchedgeData ufData, int continuity, int numPnts) throws NXException, RemoteException
NXException
RemoteException
Tag createRefitFaceFeature(UFModl.RefitFaceData refitData) throws NXException, RemoteException
NXException
RemoteException
void editRefitFaceFeature(UFModl.RefitFaceData refitData, Tag refit) throws NXException, RemoteException
NXException
RemoteException
UFModl.RefitFaceData askRefitFaceFeatureData(Tag refit) throws NXException, RemoteException
NXException
RemoteException
Tag createSnipSurfaceFeature(UFModl.SnipsrfFeatureData usrData) throws NXException, RemoteException
NXException
RemoteException
void editSnipSurfaceFeature(UFModl.SnipsrfFeatureData usrData, Tag snip) throws NXException, RemoteException
NXException
RemoteException
UFModl.SnipsrfFeatureData askSnipSurfaceFeatureData(Tag snip) throws NXException, RemoteException
NXException
RemoteException
Tag createStycorner(UFModl.StycornerData styledCornerData) throws NXException, RemoteException
NXException
RemoteException
void editStycorner(UFModl.StycornerData styledCornerData, Tag frecTag) throws NXException, RemoteException
NXException
RemoteException
UFModl.StycornerData askStycornerData(Tag frecTag) throws NXException, RemoteException
NXException
RemoteException
UFModl.StycornerData initStycornerData(UFModl.StycornerData styledCornerData) throws NXException, RemoteException
NXException
RemoteException
Tag createFixedDplane(double[] point, double[] direction) throws NXException, RemoteException
NXException
RemoteException
UFModlFeatures.CreateRelativeDplaneData createRelativeDplane(int numRefs, Tag[] objectTags, int[] pointSelect, int whichPlane, double[] referencePoint, String angleString, String offsetString) throws NXException, RemoteException
NXException
RemoteException
Tag createPointDirrDplane(Tag point, Tag direction) throws NXException, RemoteException
NXException
RemoteException
Tag createFixedDaxis(double[] point1, double[] point2) throws NXException, RemoteException
NXException
RemoteException
Tag createRelativeDaxis(int numRefs, Tag[] objEids, int[] pointSelect) throws NXException, RemoteException
NXException
RemoteException
Tag createPointDirrDaxis(Tag point, Tag direction) throws NXException, RemoteException
NXException
RemoteException
Tag createFrenetDaxis(Tag curveTag, Tag directionTag, String percString, int directionType) throws NXException, RemoteException
NXException
RemoteException
UFModlFeatures.AskDatumPlaneParmsData askDatumPlaneParms(Tag featureObjId) throws NXException, RemoteException
NXException
RemoteException
UFModlFeatures.AskDatumAxisParmsData askDatumAxisParms(Tag featureId) throws NXException, RemoteException
NXException
RemoteException
UFModlFeatures.AskDatumPointAndDirectionData askDatumPointAndDirection(Tag datumFeatureTag) throws NXException, RemoteException
NXException
RemoteException
void editDatumPoint(Tag datumFeatureTag, Tag newPoint) throws NXException, RemoteException
NXException
RemoteException
void editDatumDirection(Tag datumFeatureTag, Tag newDirection) throws NXException, RemoteException
NXException
RemoteException
void reverseDatumPlane(Tag datumPlaneTag) throws NXException, RemoteException
NXException
RemoteException
boolean isDatumPlaneReversed(Tag datumPlaneTag) throws NXException, RemoteException
NXException
RemoteException
void reverseDatumAxis(Tag datumAxisTag) throws NXException, RemoteException
NXException
RemoteException
boolean isDatumAxisReversed(Tag datumAxisTag) throws NXException, RemoteException
NXException
RemoteException
void convertToFixedDatum(Tag datumFeatureTag) throws NXException, RemoteException
NXException
RemoteException
double askDaxisSize(Tag daxisTag) throws NXException, RemoteException
NXException
RemoteException
Tag createDatumCsys(Tag objectInPart, Tag xformTag, boolean createComponents) throws NXException, RemoteException
NXException
RemoteException
UFModlFeatures.AskDatumCsysComponentsData askDatumCsysComponents(Tag datumCsysTag) throws NXException, RemoteException
NXException
RemoteException
Tag askXformTagOfDatumCsys(Tag datumCsysTag) throws NXException, RemoteException
NXException
RemoteException
void setXformTagOfDatumCsys(Tag datumCsysFeature, Tag xformTag) throws NXException, RemoteException
NXException
RemoteException
Tag createDatumCsysOffset(Tag objectInPart, Tag parentDatumCsysTag, double[] linearOffset, double[] angularOffset, boolean createComponents) throws NXException, RemoteException
NXException
RemoteException
void setDatumCsysVisibility(Tag datumCsysTag, boolean visibility) throws NXException, RemoteException
NXException
RemoteException
void setDatumCsysScaling(Tag datumCsysTag, boolean scalingOn) throws NXException, RemoteException
NXException
RemoteException
Tag createBlock(UFModl.FeatureSigns sign, Tag targTag, double[] cornerPt, String[] edgeLen) throws NXException, RemoteException
NXException
RemoteException
Tag createCone(UFModl.FeatureSigns sign, Tag targTag, double[] origin, String height, String[] diam, double[] direction) throws NXException, RemoteException
NXException
RemoteException
Tag createCylinder(UFModl.FeatureSigns sign, Tag targTag, double[] origin, String height, String diam, double[] direction) throws NXException, RemoteException
NXException
RemoteException
Tag createSphere(UFModl.FeatureSigns sign, Tag targTag, double[] center, String diam) throws NXException, RemoteException
NXException
RemoteException
Tag createBlock1(UFModl.FeatureSigns sign, double[] cornerPt, String[] edgeLen) throws NXException, RemoteException
NXException
RemoteException
Tag createCone1(UFModl.FeatureSigns sign, double[] origin, String height, String[] diam, double[] direction) throws NXException, RemoteException
NXException
RemoteException
Tag createCyl1(UFModl.FeatureSigns sign, double[] origin, String height, String diam, double[] direction) throws NXException, RemoteException
NXException
RemoteException
Tag createSphere1(UFModl.FeatureSigns sign, double[] center, String diam) throws NXException, RemoteException
NXException
RemoteException
String[] askBlockParms(Tag featureObjId, int edit) throws NXException, RemoteException
NXException
RemoteException
UFModlFeatures.AskConeParmsData askConeParms(Tag featureObjId, int edit) throws NXException, RemoteException
NXException
RemoteException
UFModlFeatures.AskCylinderParmsData askCylinderParms(Tag featureObjId, int edit) throws NXException, RemoteException
NXException
RemoteException
String askSphereParms(Tag featureObjId, int edit) throws NXException, RemoteException
NXException
RemoteException
void editHoleType(Tag holeFeature, UFModl.HoleType newHoleType) throws NXException, RemoteException
NXException
RemoteException
Tag createCBoreHole(double[] location, double[] direction, String diameter1, String depth1, String diameter2, String depth2, String angle, Tag faceLi, Tag faceT1) throws NXException, RemoteException
NXException
RemoteException
UFModlFeatures.AskSimpleHoleParmsData askSimpleHoleParms(Tag featureObjId, int edit) throws NXException, RemoteException
NXException
RemoteException
UFModlFeatures.AskCSunkHoleParmsData askCSunkHoleParms(Tag featureObjId, int edit) throws NXException, RemoteException
NXException
RemoteException
UFModlFeatures.AskCBoreHoleParmsData askCBoreHoleParms(Tag featureObjId, int edit) throws NXException, RemoteException
NXException
RemoteException
UFModlFeatures.AskTaperHoleParmsData askTaperHoleParms(Tag featureObjId, int edit) throws NXException, RemoteException
NXException
RemoteException
Tag createCSunkHole(double[] location, double[] direction, String diameter1, String depth1, String diameter2, String csinkAngle, String angle, Tag faceLi, Tag faceT1) throws NXException, RemoteException
NXException
RemoteException
Tag createSimpleHole(double[] location, double[] direction, String diame, String depth, String angle, Tag faceLi, Tag faceT1) throws NXException, RemoteException
NXException
RemoteException
UFModlFeatures.AskRectPocketParmsData askRectPocketParms(Tag featureObjId, int edit) throws NXException, RemoteException
NXException
RemoteException
UFModlFeatures.AskCylPocketParmsData askCylPocketParms(Tag featureObjId, int edit) throws NXException, RemoteException
NXException
RemoteException
Tag createCylPocket(double[] location, double[] direction, String diame, String depth, String radius, String angle, Tag face) throws NXException, RemoteException
NXException
RemoteException
Tag createRectPocket(double[] location, double[] direction, double[] xDir, String[] len, String corner, String floor, String angle, Tag face) throws NXException, RemoteException
NXException
RemoteException
UFModlFeatures.AskRectPadParmsData askRectPadParms(Tag featureObjId, int edit) throws NXException, RemoteException
NXException
RemoteException
UFModlFeatures.AskRectPadParms1Data askRectPadParms1(Tag featureObjId, int edit) throws NXException, RemoteException
NXException
RemoteException
Tag createRectPad(double[] location, double[] direction, double[] xDir, String[] size, String radius, String angle, Tag face) throws NXException, RemoteException
NXException
RemoteException
Tag createBallGroove(double[] location, double[] direction, String diame, String width, Tag face) throws NXException, RemoteException
NXException
RemoteException
UFModlFeatures.AskUGrooveParmsData askUGrooveParms(Tag featureObjId, int edit) throws NXException, RemoteException
NXException
RemoteException
UFModlFeatures.AskRectGrooveParmsData askRectGrooveParms(Tag featureObjId, int edit) throws NXException, RemoteException
NXException
RemoteException
UFModlFeatures.AskBallGrooveParmsData askBallGrooveParms(Tag featureObjId, int edit) throws NXException, RemoteException
NXException
RemoteException
Tag createRectGroove(double[] location, double[] direction, String diame, String width, Tag face) throws NXException, RemoteException
NXException
RemoteException
Tag createUGroove(double[] location, double[] direction, String diame, String width, String corner, Tag face) throws NXException, RemoteException
NXException
RemoteException
Tag createBoss(double[] location, double[] direction, String diame, String height, String angle, Tag face) throws NXException, RemoteException
NXException
RemoteException
UFModlFeatures.AskBossParmsData askBossParms(Tag featureObjId, int edit) throws NXException, RemoteException
NXException
RemoteException
Tag extractFace(Tag face, int mode) throws NXException, RemoteException
NXException
RemoteException
Tag createBplane(UFModl.StringList sSection, double[] tol) throws NXException, RemoteException
NXException
RemoteException
UFModlFeatures.AskBplaneData askBplane(Tag featureObjId) throws NXException, RemoteException
NXException
RemoteException
Tag createFaceTaper(double[] location, double[] direction, String angle, Tag[] faces) throws NXException, RemoteException
NXException
RemoteException
String askTaperParms(Tag featureObjId, int edit) throws NXException, RemoteException
NXException
RemoteException
Tag createFeatureTaper(double[] location, double[] direction, String angle, Tag originalFeature) throws NXException, RemoteException
NXException
RemoteException
Tag createTaperFromEdges(Tag directionTag, String angleStr, boolean taperAllInstances, int numEdges, Tag[] edges) throws NXException, RemoteException
NXException
RemoteException
Tag createTaperSplitLine(Tag pointTag, Tag directionTag, String angleStr, boolean taperAllInstances, int numEdges, Tag[] edges, double distTol, double angleTol) throws NXException, RemoteException
NXException
RemoteException
Tag createTrueTaperFromEdges(Tag directionTag, String angleStr, boolean taperAllInstances, int numEdges, Tag[] edges, double distTol, double angleTol) throws NXException, RemoteException
NXException
RemoteException
UFModlFeatures.AskTaperFromEdgesData askTaperFromEdges(Tag featureEid) throws NXException, RemoteException
NXException
RemoteException
UFModlFeatures.AskTaperFromEdges1Data askTaperFromEdges1(Tag featureObjId) throws NXException, RemoteException
NXException
RemoteException
void editTaperFromEdges(Tag featureEid, int type, Tag directionTag, String angleStr, boolean taperAllInstances, int numEdges, Tag[] edges, double distTol, double angleTol) throws NXException, RemoteException
NXException
RemoteException
Tag createTaperFromFaces(Tag pointTag, Tag directionTag, String angleStr, boolean taperAllInstances, int numFaces, Tag[] faces) throws NXException, RemoteException
NXException
RemoteException
Tag createTaperFromTangentFaces(Tag directionTag, String angleStr, boolean taperAllInstances, int numFaces, Tag[] faces) throws NXException, RemoteException
NXException
RemoteException
Tag createVariableTaperFromEdges(Tag directionTag, String angleStr, boolean taperAllInstances, int numEdges, Tag[] edges, int numPoints, double[] points, String[] angles, double distTol, double angleTol) throws NXException, RemoteException
NXException
RemoteException
Tag createBlend(String radius, Tag[] edgeList, int smoothOverflow, int cliffOverflow, int notchOverflow, double vrbTool) throws NXException, RemoteException
NXException
RemoteException
Tag createEdgeBlend(UFModl.EdgeBlendData blendData) throws NXException, RemoteException
NXException
RemoteException
UFModl.EdgeBlendData askEdgeBlend(Tag featureEid) throws NXException, RemoteException
NXException
RemoteException
UFModl.EdgeBlendData askEdgeBlend1(Tag featureObjId) throws NXException, RemoteException
NXException
RemoteException
void editEdgeBlend(Tag featureEid, UFModl.EdgeBlendData blendData) throws NXException, RemoteException
NXException
RemoteException
String askBlendParms(Tag featureObjId, int edit) throws NXException, RemoteException
NXException
RemoteException
void unregisterVarBlend() throws NXException, RemoteException
NXException
RemoteException
void unregisterCliffBlend() throws NXException, RemoteException
NXException
RemoteException
UFModlFeatures.AskFaceBlendLawRadiiData askFaceBlendLawRadii(Tag feature) throws NXException, RemoteException
NXException
RemoteException
UFModlFeatures.AskFaceBlendLawRange1RadiiData askFaceBlendLawRange1Radii(Tag feature) throws NXException, RemoteException
NXException
RemoteException
UFModlFeatures.AskFaceBlendLawRange2RadiiData askFaceBlendLawRange2Radii(Tag feature) throws NXException, RemoteException
NXException
RemoteException
void setFaceBlendLawRadii(Tag feature, double[] radiiValues, int radNum) throws NXException, RemoteException
NXException
RemoteException
void setFaceBlendLawRange1Radii(Tag feature, double[] radiiValues, int radNum) throws NXException, RemoteException
NXException
RemoteException
void setFaceBlendLawRange2Radii(Tag feature, double[] radiiValues, int radNum) throws NXException, RemoteException
NXException
RemoteException
void initEdgeBlendMult(UFModl.EdgeBlendMultData blendData) throws NXException, RemoteException
NXException
RemoteException
void initEdgeBlendSetMult(UFModl.EdgeBlendSet blendSet) throws NXException, RemoteException
NXException
RemoteException
void initEdgeBlendPointMult(UFModl.BlendPointData pointData) throws NXException, RemoteException
NXException
RemoteException
void initEdgeBlendSetbackMult(UFModl.EdgeBlendSetbackData sbData) throws NXException, RemoteException
NXException
RemoteException
void initEdgeBlendStopshortMult(UFModl.EdgeBlendStopshortData ssData) throws NXException, RemoteException
NXException
RemoteException
Tag createEdgeBlendMult(UFModl.EdgeBlendMultData blendData) throws NXException, RemoteException
NXException
RemoteException
boolean askEdgeBlendIsMult(Tag featureEid) throws NXException, RemoteException
NXException
RemoteException
void editEdgeBlendMult(Tag featureEid, UFModl.EdgeBlendMultData blendData) throws NXException, RemoteException
NXException
RemoteException
void editHollow(Tag featureId, int type, double tolerance, String thickness, int nPiercedFaces, Tag[] piercedFaces, int nBoundaryFaces, Tag[] boundaryFaces, int nOffsetFaces, Tag[] offsetFaces, String[] offsetThickness) throws NXException, RemoteException
NXException
RemoteException
Tag createHollow(String thickness, Tag[] faces) throws NXException, RemoteException
NXException
RemoteException
String askHollowParms(Tag featureObjId, int edit) throws NXException, RemoteException
NXException
RemoteException
Tag createVariableHollow(double tolerance, String thickness, int nPiercedFaces, Tag[] piercedFaces, int nBoundaryFaces, Tag[] boundaryFaces, int nOffsetFaces, Tag[] offsetFaces, String[] offsetThickness) throws NXException, RemoteException
NXException
RemoteException
UFModlFeatures.AskHollowData askHollowData(Tag featureId, int type) throws NXException, RemoteException
NXException
RemoteException
UFModlFeatures.CreateSimplifyData createSimplify(UFModl.SimplData simplParms) throws NXException, RemoteException
NXException
RemoteException
UFModlFeatures.EditSimplifyParmsData editSimplifyParms(Tag featureTag, UFModl.SimplData simplParms) throws NXException, RemoteException
NXException
RemoteException
UFModl.SimplData askSimplifyParms(Tag featureTag) throws NXException, RemoteException
NXException
RemoteException
Tag createImprLoop(UFModl.ImprintLoopData parms) throws NXException, RemoteException
NXException
RemoteException
void editImprLoopParms(Tag featureTag, UFModl.ImprintLoopData parms) throws NXException, RemoteException
NXException
RemoteException
UFModl.ImprintLoopData askImprLoopParms(Tag featureTag) throws NXException, RemoteException
NXException
RemoteException
Tag createImprFaces(UFModl.ImprintFacesData parms) throws NXException, RemoteException
NXException
RemoteException
void editImprFacesParms(Tag featureTag, UFModl.ImprintFacesData parms) throws NXException, RemoteException
NXException
RemoteException
UFModl.ImprintFacesData askImprFacesParms(Tag featureTag) throws NXException, RemoteException
NXException
RemoteException
UFModlFeatures.AskImprEdgesData askImprEdges(Tag featureTag) throws NXException, RemoteException
NXException
RemoteException
Tag createFaceConstraint(UFModl.DfoRegion region, UFModl.DfoConstraint constraint) throws NXException, RemoteException
NXException
RemoteException
void editFaceConstraint(Tag featureTag, UFModl.DfoRegion region, UFModl.DfoConstraint constraint) throws NXException, RemoteException
NXException
RemoteException
UFModlFeatures.AskFaceConstraintData askFaceConstraint(Tag featureTag) throws NXException, RemoteException
NXException
RemoteException
Tag createResizeFace(Tag[] targetFaces, int numTarget, Tag[] nonBlendFaces, int numNonBlend, String newParameter) throws NXException, RemoteException
NXException
RemoteException
void editResizeFace(Tag featureTag, Tag[] targetFaces, int numTarget, Tag[] nonBlendFaces, int numNonBlend, String newParameter) throws NXException, RemoteException
NXException
RemoteException
UFModlFeatures.AskResizeFaceData askResizeFace(Tag featureTag) throws NXException, RemoteException
NXException
RemoteException
Tag createReplaceFace(Tag[] targetFaces, int numTarget, Tag[] nonBlendFaces, int numNonBlend, Tag toolFace, boolean reverseDirection) throws NXException, RemoteException
NXException
RemoteException
void editReplaceFace(Tag featureTag, Tag[] targetFaces, int numTarget, Tag[] nonBlendFaces, int numNonBlend, Tag toolFace, boolean reverseDirection) throws NXException, RemoteException
NXException
RemoteException
UFModlFeatures.AskReplaceFaceData askReplaceFace(Tag featureTag) throws NXException, RemoteException
NXException
RemoteException
Tag createOffsetRegion(UFModl.DfoRegion region, String offset) throws NXException, RemoteException
NXException
RemoteException
void editOffsetRegion(Tag featureTag, UFModl.DfoRegion region, String offset) throws NXException, RemoteException
NXException
RemoteException
UFModlFeatures.AskOffsetRegionData askOffsetRegion(Tag featureTag) throws NXException, RemoteException
NXException
RemoteException
Tag createRectangularPatternFace(UFModl.DfoRegion region, Tag xAxis, Tag yAxis, int numX, int numY, String xOffset, String yOffset) throws NXException, RemoteException
NXException
RemoteException
void editRectangularPatternFace(Tag featureTag, UFModl.DfoRegion region, Tag xAxis, Tag yAxis, int numX, int numY, String xOffset, String yOffset) throws NXException, RemoteException
NXException
RemoteException
UFModlFeatures.AskRectangularPatternFaceData askRectangularPatternFace(Tag featureTag) throws NXException, RemoteException
NXException
RemoteException
Tag createCircularPatternFace(UFModl.DfoRegion region, Tag axis, int nPattern, String angle) throws NXException, RemoteException
NXException
RemoteException
void editCircularPatternFace(Tag featureTag, UFModl.DfoRegion region, Tag axis, int nPattern, String angle) throws NXException, RemoteException
NXException
RemoteException
UFModlFeatures.AskCircularPatternFaceData askCircularPatternFace(Tag featureTag) throws NXException, RemoteException
NXException
RemoteException
Tag createMirrorPatternFace(UFModl.DfoRegion region, Tag mirrorPlane) throws NXException, RemoteException
NXException
RemoteException
void editMirrorPatternFace(Tag featureTag, UFModl.DfoRegion region, Tag mirrorPlane) throws NXException, RemoteException
NXException
RemoteException
UFModlFeatures.AskMirrorPatternFaceData askMirrorPatternFace(Tag featureTag) throws NXException, RemoteException
NXException
RemoteException
Tag createLocalScale(UFModl.DfoScaleType type, UFModl.DfoRegion region, Tag soPoint, Tag soDir, Tag soCsys, String[] factors) throws NXException, RemoteException
NXException
RemoteException
UFModlFeatures.AskLocalScaleData askLocalScale(Tag featureTag) throws NXException, RemoteException
NXException
RemoteException
void editLocalScale(Tag featureTag, UFModl.DfoScaleType type, UFModl.DfoRegion region, Tag soPoint, Tag soDir, Tag soCsys, String[] factors) throws NXException, RemoteException
NXException
RemoteException
UFModlFeatures.AskMoveRegionData askMoveRegion(Tag featureTag) throws NXException, RemoteException
NXException
RemoteException
Tag createReblendFace(UFModl.ReblendFaceData reblendData) throws NXException, RemoteException
NXException
RemoteException
UFModl.ReblendFaceData askReblendFace(Tag featureEid) throws NXException, RemoteException
NXException
RemoteException
void editReblendFace(Tag featureEid, UFModl.ReblendFaceData reblendData) throws NXException, RemoteException
NXException
RemoteException
Copyright 2016 Siemens Product Lifecycle Management Software Inc. All Rights Reserved.