Package | Description |
---|---|
nxopen |
Provides classes and interfaces for the NX Open Common API.
|
nxopen.cam |
Provides classes and interfaces for Manufacturing.
|
nxopen.cam.fbm |
Provides classes and interfaces for Manufacturing.
|
nxopen.sim |
Provides classes and interfaces for Machine Tool Builder and CAM-Simulation.
|
Class and Description |
---|
CAMFeatureCollection
Represents the CAMFeature collection
To obtain an instance of this class, refer to BasePart Created in NX7.5.0 |
CAMSession |
CAMSetup |
GeneralPropertiesBuilder
Represents a
GeneralPropertiesBuilder to be used for setting the name
of a specified CAM object. |
InspectionSetup |
Class and Description |
---|
AcrossVoids |
AcrossVoids.MotionTypes
Available types for Across Voids Method in planar mill operation
|
AlongMachineAxisMoveBuilder
Represents Along MCS Axis Move Builder
To create a new instance of this class, use MoveCollection.createAlongMcsAxisMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
AlongMcsAxisMoveBuilder
Represents Along MCS Axis Move Builder
To create a new instance of this class, use MoveCollection.createAlongMcsAxisMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
AlongToolAxisMoveBuilder
Represents the Move To Point Builder
To create a new instance of this class, use MoveCollection.createAlongToolAxisMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
ArcOutputTypeCiBuilder
Represents a ArcOutputTypeCiBuilder .
|
ArcOutputTypeCiBuilder.OutputTypes
Available types for output
|
ArcOutputTypeCiBuilder.SplineArcOutputTypes
the available types for spline arc output
|
ArcOutputTypeCiBuilder.SplineFitToleranceTypes
the available types for spline fitting tolerance
|
ArcOutputTypeCiBuilder.SplineLineOutputTypes
the available types for spline line output
|
AreaMillingContainment
Represents a Containment Builder .
|
AreaMillingContainment.CutDirectionTypes
Available types for Cut Direction in Area Milling
|
AreaMillingNonSteepContainment
Represents a NonSteep Containment Builder .
|
AreaMillingNonSteepContainment.AmPocketDirTypes
Available types for Area Milling Pocketing Direction in FASurfaceContour
|
AreaMillingNonSteepContainment.AutoPatCenterTypes
Available types for area milling Auto Pattern Center
|
AreaMillingNonSteepContainment.PatternDirectionTypes
Available types for Pattern Direction in Area Milling
|
AreaMillingSteepContainment
Represents a Steep Containment Builder .
|
AreaMillingSteepContainment.CutLevelTypes
cut level types .
|
BarrelToolBuilder
Represents a BarrelTool Builder
To create a new instance of this class, use NCGroupCollection.createBarrelToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
BaseBuilder |
Blade
Represents a Blade Rough Drive Method Builder
This is an abstract superclass that has instantaible subclasses . |
Blade.MaterialSideType
Available types for Flip Material, SDM: Select Cut Direction
|
BladeCutLevels
Represents a Blade Cut Levels Builder
This is an abstract class and cannot be instantiated. |
BladeCutLevels.DepthModeTypes
Available types for Depth Mode
|
BladeCutLevels.DepthPerCutTypes
Available types for Depth per Cut
|
BladeCutLevels.HubExtensionsTypes
Available types for Hub Extensions
|
BladeCutLevels.IncompleteLevelsTypes
Available types for Incomplete Levels
|
BladeCutLevels.RangeDepthTypes
Available types for Range Depth
|
BladeCutStart
Represents a Blade Rough Drive Method Builder
This is an abstract superclass that has instantaible subclasses . |
BladeCutStart.Type
Available types for Starting Cut
|
BladeEdge
Represents a BladeEdge Builder .
|
BladeEdge.EdgeDefinitionType
Available types for Edge Definition
|
BladeEdge.EdgePointType
Available types for Blade Edge Point
|
BladeFinish
Represents a Blade Finish Drive Method Builder .
|
BladeFinishGeom
Represents BladeFinishGeom Builder .
|
BladeFinishGeom.Types
Available types for geometry to finish
|
BladeRough
Represents a Blade Rough Drive Method Builder .
|
BladeStartPoint
Represents BladeStartPoint Builder .
|
BladeStartPoint.Types
Available types for Blade Start Point .
|
BlankIpw
Represents the blank ipw builder for blank definition
To obtain an instance of this class use the GeometryGroup Created in NX8.0.0 |
BlankIpw.SourceData
This class holds the data returned from
BlankIpw.getSource() |
BlankIpw.StatusTypes
the blank IPW status types
|
BlendFinish
Represents a Blend Finish Drive Method Builder .
|
Boundary
Represents a CAM boundary object
This is an abstract class and cannot be instantiated. |
BoundaryMemberSet
Represents a boundary member set .
|
BoundaryMemberSet.ConnectMemberType
the types available for connect member
|
BoundaryMemberSetList
Represents a list of objects.
|
BoundaryMemberSetPlanarMill
Represents a boundary member set .
|
BoundaryMemberSetPlanarMill.FeedUnitTypes
the types available for the feed rate unit
|
BoundaryMillingMemberSet
Represents a boundary member set .
|
BoundaryMillingMemberSet.FeedUnitTypes
the types available for the feed rate unit
|
BoundaryMillingSet
Represents a boundary milling set.
|
BoundaryPlanarMill
Represents a CAM boundary object
This is an abstract class and cannot be instantiated. |
BoundarySet
Represents a boundary set.
|
BoundarySet.BoundaryTypes
the boundary types .
|
BoundarySet.PlaneTypes
the boundary plane types .
|
BoundarySet.ToolPositionTypes
the tool position .
|
BoundarySet.ToolSideTypes
the tool side types .
|
BoundarySetList
Represents a list of objects.
|
BoundarySetPlanarMill
Represents a boundary set for the planar mill/surface contour operation
To create a new instance of this class, use Boundary.createBoundarySetPlanarMill() Created in NX11.0.1 |
BoundarySetPlanarMill.FeedUnitTypes
the types available for the feed rate unit
|
BoundarySetPlanarMill.TrimExtendPosition
the boundary position where to trim or to extend
|
BoundaryTurnBlank
Represents a
BoundaryTurnBlank
This builder cannot be instantiated separately. |
BoundaryTurnBlank.Position
the mounting direction types available
|
BoundaryTurnBlank.Type
the blank types available
|
BoundaryTurnMemberCorner
Represents a
BoundaryTurnMemberCorner
This builder cannot be instantiated separately. |
BoundaryTurnMemberCorner.AngleValueType
the corner angle types available
|
BoundaryTurnMemberCorner.CornerType
the corner types available
|
BoundaryTurnMemberCorner.FeedType
the corner feed rate types available
|
BoundaryTurnMemberCorner.ShapeType
the corner shape types available
|
BoundaryTurnMemberEvents
Represents a
BoundaryTurnMemberEvents
This builder cannot be instantiated separately. |
BoundaryTurnMemberFeed
Represents a
BoundaryTurnMemberFeed
This builder cannot be instantiated separately. |
BoundaryTurnMemberFeed.FeedType
the corner feed rate types available
|
BoundaryTurnMemberFineFinishCorner
Represents a
BoundaryTurnMemberFineFinishCorner
This builder cannot be instantiated separately. |
BoundaryTurnMemberFineFinishCorner.AppliedTo
the corner applied to available
|
BoundaryTurnMemberFineFinishCorner.Cleanup
the corner cleanup available
|
BoundaryTurnMemberFineFinishCorner.ValueType
the corner types available
|
BoundaryTurnMemberFineFinishOffset
Represents a
BoundaryTurnMemberFineFinishOffset
This builder cannot be instantiated separately. |
BoundaryTurnMemberFineFinishOffset.StatusValue
the fine finish offset stati available
|
BoundaryTurnMemberFineFinishOffset.TypeValue
the types available for fine finsish offset method
|
BoundaryTurnMemberOffset
Represents a
BoundaryTurnMemberOffset
This builder cannot be instantiated separately. |
BoundaryTurnMemberOffset.DistanceTypeMode
the types available for member distance
|
BoundaryTurnMemberOffset.MethodType
the types available for member offset method
|
BoundaryTurnMemberOffset.ModeType
the types available for member offset mode
|
BoundaryTurnMemberSet.ConcaveCornersTypeValue
the types available for the concave corners
|
BoundaryTurnSet
Represents a boundary turning set.
|
BoundaryTurnSet.FeedUnitTypes
the types available for the feed rate unit
|
BoundaryTurnVariableStock
Represents a BoundaryTurnVariableStock
This is an abstract class and cannot be instantiated. |
BoundaryTurnVariableStock.PositionType
the position types available
|
BoundaryTurnVariableStockSet
Represents a turning boundary variable stock set
To create a new instance of this class, use BoundaryTurnVariableStock.createItemBuilder() Created in NX9.0.2 |
BoundaryTurnVariableStockSet.FeedType
the feed rate types available
|
BoundaryTurnVariableStockSetList
Represents a list of objects.
|
CAMAttribute
Represents a CAM Feature Attribute
To obtain an instance of this class use CAMFeature Created in NX8.0.0 |
CAMAttribute.ValueType
Attribute types
|
CAMAttributeCollection
Represents the CAM Attribute collection
To obtain an instance of this class, refer to CAMFeature Created in NX8.0.0 |
CAMFeature
Represents a CAM Feature
To obtain an instance of this class use FeatureRecognitionBuilder Created in NX7.5.0 |
CAMFeature.ProcessStatus
Process status of the feature
|
CAMFeature.State
Update status of the feature
|
CAMFeatureList
Represents a list of objects.
|
CamInspectionOperationCsysreferencetypes
Coordinate system that the inspection feature data is relative to
|
CamInspectionOperationExtenttypes
Specifies whether the feature extent is bounded or unbounded
|
CamInspectionOperationFeaturetypes
Specifies the type of an inspection feature
|
CamInspectionOperationInneroutertypes
Directionality of feature surface
|
CAMObject
Represents interface for all CAM Object
To create or edit an instance of this class, use ParamBuilder Created in NX4.0.0 |
CAMObject.Attr
Represents the CAM attribute type.
|
CAMObject.ErrorItem
Error Item
|
CAMObject.FeedRateData
This class holds the data returned from
CAMObject.getFeedRate(java.lang.String) |
CAMObject.FeedRateUnit
The unit of feed rate
|
CAMObject.Status
The status of the object
|
CAMObject.WireEdmFeedRateData
This class holds the data returned from
CAMObject.getWireEdmFeedRate(java.lang.String) |
CamOperationFeedContentType
Feed content type
|
CamOperationFeedUnitType
Feed unit types
|
CamOperationMotionPosType
Motion pos type
|
CamOperationMotionShapeType
Motion shape types
|
CamOperationMotionType
Types of motions
|
CamPathContactMotionShapeType
Contact Motion shapes
|
CamPathContactType
Contact type of the Path
|
CamPathDir
Motion direction for circular and helix motions
|
CamPathFeedUnitType
Feedrate units
|
CamPathMotionShapeType
Motion shapes
|
CamPathMotionType
Motion types
|
CamPathToolAxisType
Tool axis type of the Path
|
CamPathToolpathEventLocation
The location where a path event has to be added into the path
|
CamPathToolpathEventType
Tool Path event types
|
CAMSession.DialogCustomizationData
This class holds the data returned from
CAMSession.getDialogCustomization(nxopen.cam.CAMObject) |
CAMSession.ObjectSubtype
the template subtype class
|
CAMSetup.OutputUnits
Output units used in output clsf and postprocess.
|
CAMSetup.PartMaterialData
This class holds the data returned from
CAMSetup.getPartMaterialData() |
CAMSetup.Paste
Paste position.
|
CAMSetup.PostprocessSettingsOutputWarning
Output warning setting for Postprocess
|
CAMSetup.PostprocessSettingsReviewTool
Review tool setting for Postprocess
|
CAMSetup.RetrieveToolData
This class holds the data returned from
CAMSetup.retrieveTool(java.lang.String) |
CAMSetup.Ude
The UDE type
|
CAMSetup.View
ONT view.
|
CavityMillingBuilder
Represents a CavityMilling Builder
To create a new instance of this class, use OperationCollection.createCavityMillingBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
CenterlineDrillTurningBuilder
Represents a CenterlineDrillTurningBuilder
To create a new instance of this class, use OperationCollection.createCenterlineDrillTurningBuilder(nxopen.cam.CAMObject) Created in NX6.0.0 |
CenterlineDrillTurningBuilder.CycleTypes
the centerline cycle types .
|
CenterlineDrillTurningBuilder.DepthReferenceTypes
the depth reference option types .
|
CenterlineDrillTurningBuilder.DepthTypes
the depth option types .
|
CenterlineDrillTurningBuilder.DrillingLocationTypes
the drilling location .
|
CenterlineDrillTurningBuilder.DwellTypes
the dwell modes .
|
CenterlineDrillTurningBuilder.FinalRetractTypes
the retract types for simulated cycles .
|
CenterlineDrillTurningBuilder.OutputOptionTypes
the output option .
|
CenterlineDrillTurningBuilder.RemovalIncrementTypes
the removal increment types .
|
CenterlineDrillTurningBuilder.SpindleStopTypes
the spindle stop types .
|
CenterlineDrillTurningBuilder.StartPositionTypes
the start position .
|
CenterlineDrillVariableIncrementBuilder
Represents a Turn Avoidance Path Points Builder .
|
CenterlineDrillVariableIncrementBuilder.VariableIncrementListData
This class holds the data returned from
CenterlineDrillVariableIncrementBuilder.getVariableIncrementListData(int) |
ChamferMillingBuilder
Represents a ChamferMillingBuilder Builder
To create a new instance of this class, use OperationCollection.createChamferMillingBuilder(nxopen.cam.CAMObject) Created in NX9.0.2 |
ChamferMillingBuilder.ChamferReferenceType
Available types for chamfer reference
|
ChipControl |
ChipControl.Types
the control mode options .
|
CircularAboutAxisMoveBuilder
Represents the Circular Move To Point Builder
To create a new instance of this class, use MoveCollection.createCircularAboutAxisMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
CircularAboutAxisMoveBuilder.AxisType
the axis type
|
CircularAboutAxisMoveBuilder.EndType
the motion end type
|
CircularAboutAxisMoveBuilder.ExtensionType
the extension type
|
CleanupOutput |
CleanupOutput.GeomTypes
Available types for cleanup outputing geometry type, Cleanup Geometry Output
|
CleanupSettings |
CollisionConfigurationBuilder
Represents a
CollisionConfigurationBuilder
This is an abstract class, and cannot be instantiated. |
CollisionPairBuilder
Represents a
CollisionPairBuilder
To create a new instance of this class, use KinematicConfigurator.createCollisionPairBuilder() Created in NX6.0.0 |
CollisionPairBuilder.Filter
the collision selection filter value
|
CollisionPairBuilderList
Represents a list of objects.
|
ContainerMoveBuilder
Represents the container move
To create a new instance of this class, use MoveCollection.createContainerMoveBuilder(nxopen.cam.Move, int) Created in NX11.0.2 NX_REMOVE_FROM_JAVA_API |
ContourAngle |
ConvertFromMCDBuilder.MachineTypes
Represents the machine type option.
|
ConvertFromMCDBuilder.PocketLocationTypes
Represents the pocket location option.
|
CornerControlBuilder
Represents a FinishPasses Builder .
|
CornerControlBuilder.AdjustFeedRateOptions
Available Adjust Feed Rate options
|
CornerControlBuilder.CornerControlMethods
Available methods for Corner Control
|
CornerControlBuilder.SlowdownDistanceOptions
Available Slowdown Distance options
|
CornerControlBuilder.SmoothCornersAtOptions
Available options where Corner Smoothing should be applied
|
CornerControlBuilder.SmoothingOptions
Available options for corner smoothing
|
CustomLoops
Deprecated.
Deprecated in NX9.0.0. Use
PatchOpeningsBuilder instead.
|
CustomLoopSet
Deprecated.
Deprecated in NX9.0.0. Use
PatchOpeningsBuilder instead.
|
CustomLoopSetList
Represents a list of objects.
|
CutAngle
Represents a boundary cut angle ci Builder .
|
CutAngle.Types
Available types for cut angle type in boundary cut angle customizable item
|
CutBand
Cut Band Builder .
|
CutBand.Types
Available types for Cut Band .
|
Cutcom |
Cutcom.Types
Available types for cutter compensation in planar milling
|
CutDepthChecker
Represents a cut depth checker object
This has not creator . |
CutDirection
Represents a boundary cut direction ci Builder
This builder can not instantiated separately. |
CutDirection.Types
Available types for cut direction type in boundary cut direction customizable item
|
CutDwell |
CutDwell.Types
the rough cut dwell mode options .
|
CutLevel
Represents a cut level object for cavity mill and zlevel mill.
|
CutLevel.MeasureTypes
measure from types .
|
CutLevel.RangeTypes
range types .
|
CutLevel.Types
cut level types .
|
CutLevelPlanar
Represents a cut level object for planar mill.
|
CutLevelPlanar.Types
cut level types .
|
CutParameters |
CutParametersActionWhenGougingTypes
Available types for actions when gouging
|
CutParametersAdjacentBladesTypes
Available types for Adjacent Blades Option .
|
CutParametersCleanupControlTypes
Available types for cleanup control .
|
CutParametersCornerFindingTypes
Available types for Finding Corner Options .
|
CutParametersCutConnectionTypes
Available types for cut connection .
|
CutParametersCutOrderTypes
Available types for cut order
|
CutParametersExtendAtStartMode
Available modes for Turning Cutting Corners Extend At Start .
|
CutParametersExtendFloorTypes
extend floor to options .
|
CutParametersFilletsTypes
Available types for fillets .
|
CutParametersFinishPassesTypes
Available types for finish passes .
|
CutParametersIpwTypes
Available types for IPW
|
CutParametersPatternDirectionTypes
Available types for pattern direction
|
CutParametersPlungeDirectionTypes
Available types for plunge direction
|
CutParametersProfileCutRegionsTypes
Available types for profile .
|
CutParametersRegionSequencingTypes
Available types for region resequencing method
|
CutParametersSimplifyShapesTypes
Available types for simplify shapes method
|
CutParametersToolRunOffTypes
Available types for Tool Run Off Options .
|
CutParametersTraverseOpenPassesTypes
Available types for traverse open passes
|
CutParametersTrimControlTypes
Available types for trim control method
|
CutPatternBuilder
Represents a Cut Pattern Builder .
|
CutPatternBuilder.Types
cut pattern options .
|
CutRegionsBuilder
Represents a Cut Regions Builder .
|
CutRegionsBuilder.CutRegionsContainmentTypes
Available types for containment import options
|
CutRegionsBuilder.CutRegionsProgramTypes
Available types for program import options
|
CutRegionsBuilder.CutRegionsStatusTypes
Available types for status import options
|
CutRegionsData
Represents the Cut Regions data .
|
CutSideBuilder
Represents a cut side builder
This is an abstract class and cannot be instantiated. |
CutSideBuilder.Option
Enum of cut side
|
CutSides
Represents a Cut Sides Builder .
|
CutSides.SideType
Available types for sides to cut
|
CutStrategy
Represents cut strategy .
|
CutStrategy.Types
The cut strategy options .
|
CutterExport
Represents Cutter Export Builder .
|
CutterExport.HolderExportStatus
the holder export status
|
CutterExport.SaveFlags
the save flag options
|
CutterExport.TrackpointExportStatus
the trackpoint export status
|
CutterExport.ValidValuesOfAttributeData
This class holds the data returned from
CutterExport.getValidValuesOfAttribute(java.lang.String) |
CutVolume
The classs represent the sub builder for creating cut volume feature items
To create a new instance of this class, use CutVolumeGeom.createCutVolume() Created in NX8.0.0 |
CutVolumeGeom
The classs represent the builder for creating cut volume features .
|
CutVolumeList
Represents a list of objects.
|
Cycle
Represets a User Defined Event .
|
Cycle.CutMode
Available types for fixed cut
|
Cycle.DwellType
Available types for dwell
|
Cycle.MotionOutputTypes
Available types for motion output
|
CycleCoolant
Represets a User Defined Event .
|
CycleCoolant.Flow
Available types for coolant flow mode
|
CycleDwell
Represets a User Defined Event .
|
CycleDwell.Mode
Available types for dwell mode
|
CycleNodragClearance
Represets a User Defined Event .
|
CycleSpindle
Represets a User Defined Event .
|
CycleSpindle.Mode
Available types for spindle mode
|
CycleStepRetract
Represets a User Defined Event .
|
CycleTipRelease
Represets a User Defined Event .
|
CylinderMillingBuilder
Represents a CylinderMillingBuilder Builder
To create a new instance of this class, use OperationCollection.createCylinderMillingBuilder(nxopen.cam.CAMObject) Created in NX8.0.0 |
CylinderMillingBuilder.BlankDiameterTypes
blank diamter options .
|
CylinderMillingBuilder.CutPatternTypes
cut pattern options .
|
CylinderMillingBuilder.DepthPerRevolutionTypes
Depth Per Revolution options .
|
CylinderMillingBuilder.DiameterForHelixTypes
Diameter for Helix .
|
CylinderMillingCutParameters
Represents a CylinderMillingCutParameters Builder .
|
CylinderMillingCutParameters.CutDirectionTypes
cut direction options .
|
CylindricalMillingBuilder
Represents a CylindricalMilling Builder
This is an abstract class and cannot be instantiated. |
CylindricalMillingCutParameters
Represents a CylindricalMillingCutParameters Builder
This is an abstract class and cannot be instantiated. |
DeltaMoveBuilder
Represents the Delta Move Builder
To create a new instance of this class, use MoveCollection.createDeltaMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
DeltaMoveBuilder.IntentType
Move Intent
|
DimensionRule
Represents a DimensionRule Builder .
|
DimensionRule.Types
dimension rule types .
|
DisplayPaint
Represents a display paint Builder
This is an abstract class and cannot be instantiated. |
DisplayPath
Represents a display path Builder
This is an abstract class and cannot be instantiated. |
DisplayPath.PathDisplayTypes
the path display types .
|
DisplaySilhouette
Represents a display silhouette Builder
This is an abstract class and cannot be instantiated. |
DisplayTool
Represents a display tool Builder
This is an abstract class and cannot be instantiated. |
DisplayTool.ToolDisplayTypes
the tool display types .
|
DmAmBuilder
Represents a Area Milling Drive Method Builder .
|
DmAmBuilder.AmCustomStartTypes
Available types for in FASurfaceContour
|
DmAmBuilder.AmCutPatternTypes
Available types for Area Milling cut pattern in FASurfaceContour
|
DmAmBuilder.AmCutTraversalTypes
Available types for Area Milling cut traversal in FASurfaceContour
|
DmAmBuilder.AmPocketDirTypes
Available types for Area Milling Pocketing Direction in FASurfaceContour
|
DmAmBuilder.AutoPatCenterTypes
Available types for area milling Auto Pattern Center
|
DmAmBuilder.OrderRegionsOptTypes
Available type for area milling Order Regions Option
|
DmAmBuilder.SteepOptTypes
Available types for area milling Steep Option
|
DmAmBuilder.SteepOverlapOptTypes
Available types for area milling Steep Overlap Option
|
DmBndBuilder
Represents a Boundary Drive Method Builder .
|
DmBndBuilder.ApplyFilletAtTypes
Available types for boundary Corner Control Option
|
DmBndBuilder.BndCustomStartTypes
Available types for in FASurfaceContour
|
DmBndBuilder.BndCutPatternTypes
Available types for Boundary cut pattern in FASurfaceContour
|
DmBndBuilder.BndCutTraversalTypes
Available types for Boundary cut traversal in FASurfaceContour
|
DmBndBuilder.BndPatternCenterTypes
Available types for Boundary Pattern Center in FASurfaceContour
|
DmBndBuilder.BndPocketDirTypes
Available types for Boundary Pocketing Direction in FASurfaceContour
|
DmBndBuilder.UsePartTypes
Available types for boundary use part cantainment Option
|
DmCmBuilder
Represents a DmCmBuilder .
|
DmCmBuilder.ContactPositionRingHeightType
Available types for contact position ring height
|
DmCmBuilder.DmCmCutPointType
Available types for point type, Contour Milling Drive
|
DmCmBuilder.ExtDisType
Available types for ext_dis, Contour Milling Drive: Start of Cut
|
DmCmBuilder.ToolAxisGuideVectorType
Available types for vector type, Contour Milling Drive
|
DmCmMultiplePassesCiBuilder
Represents a DmCmMultiplePassesCiBuilder
To obtain an instance of this class use DmCmBuilder.dmCmMultiplePassesBuilder() Created in NX5.0.0 |
DmCmMultiplePassesCiBuilder.OrderType
Available types for Order
|
DmCmMultiplePassesCiBuilder.WallStepMethodType
Available types for Wall Step Method
|
DmCurveBuilder
Represents a Curve Drive Method Builder .
|
DmCurveBuilder.DpmcvStepTypes
Available types for Cure Drive Cut Step
|
DmRadBuilder
Represents a DmRadBuilder Builder .
|
DmRadBuilder.RadCutMethodType
Available types for Radial Cut/Cut Method in scop
|
DmRadBuilder.RadStepoverTypeType
Available types for Stepover for the Radial Cut in scop.
|
DmRadBuilder.RadTraverseDirType
Available types for Radial Cut/ Traverse Direction
|
DmRotaryFloorFinishBuilder
represent rotary floor finish builder .
|
DmRotaryFloorFinishBuilder.CutDirection
the types for start cut direction
|
DmRotaryFloorFinishBuilder.CutDirType
the types for cut direction
|
DmRotaryFloorFinishBuilder.DirectionType
the types for direction
|
DmRotaryFloorFinishBuilder.DmSurfCutAreaType
the types for cut area
|
DmRotaryFloorFinishBuilder.DmSurfCutStepTypes
the types for Cut Step
|
DmRotaryFloorFinishBuilder.GougeActionTypes
the gouge action types for Rotary Floor Finish method/Gouge Check in scop
|
DmRotaryFloorFinishBuilder.MatSideType
the types for flip material
|
DmSpiralBuilder
Represents a Spiral Drive Method Builder
This is an abstract class and cannot be instantiated. |
DmSpiralBuilder.DmSpiralStepoverTypes
Available types for Spiral drive method stepover in SurfaceContour.
|
DmStreamlineCutStep
Represents a streamline cut step builder
This object is a sub-object and cannot be instantiated. |
DmSurfBuilder
Represents a DmSurfBuilder .
|
DmSurfBuilder.CutDirection
Available types for Cut Direction
|
DmSurfBuilder.DmSurfCutAreaType
Available types for SDM: Cut Area
|
DmSurfBuilder.DmSurfCutPatternType
SDM: Cut Method in scop, cut pattern
|
DmSurfBuilder.DmSurfCutStepType
Available types for SDM: Cut Step
|
DmSurfBuilder.DmSurfCutTraversalType
SDM: Cut Method in scop, cut traversal
|
DmSurfBuilder.GougeActionType
Surface Drive method/Gouge Check in scop
|
DmSurfBuilder.MatSideType
Available types for Flip Material, SDM: Select Cut Direction
|
DmSurfBuilder.ToolPositionType
Available types for SDM: Tool Position Type
|
DmToolPosition
Represents a streamline tool position builder
This is an abstract class and cannot be instantiated. |
DmToolPosition.ToolPositionOption
Enum of tool position
|
DmTpBuilder
Represents a tool path Drive Method Builder
This is an abstract class and cannot be instantiated. |
DmTrimExtend
Represents a streamline trim and extend builder
This is an abstract class and cannot be instantiated. |
DmUserExitCiBuilder
Represents a exit name ci Builder .
|
DocumentationBuilder
Represents a Documentation Builder
To create a new instance of this class, use OperationCollection.createDocumentationBuilder(nxopen.cam.CAMObject) Created in NX9.0.3 |
DPMItpBuilder
Represents an DPMItp Builder
To create a new instance of this class, use OperationCollection.createDpmitpBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
DPMItpBuilder.CrossCurvesMethodOption
Enum of cross curves creation method
|
DPMItpBuilder.CutTypeOption
Enum of cut type
|
DPMItpBuilder.SelectionMethodOption
Enum of selection method
|
DPMItpBuilder.StepMethodOption
Enum of step method
|
DPMItpBuilder.StepoverTypeOption
Enum of stepover type
|
DPMItpBuilder.ToolPositionOption
Enum of tool position
|
DrillBackCountersinkTool
Represents a Drill Back Countersink Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillBackCountersinkTool(nxopen.cam.CAMObject) Created in NX10.0.2 |
DrillBackSpotfacingToolBuilder
Represents a drill back spotfacing Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillBackSpotfacingToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
DrillBoreToolBuilder
Represents a drill bore Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillBoreToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
DrillBoringBarTool
Represents a new Boring Bar Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillBoringBarTool(nxopen.cam.CAMObject) Created in NX11.0.1 |
DrillBurnishingToolBuilder
Represents a drill burnishing Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillBurnishingToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
DrillCenterBellToolBuilder
Represents a Drill Center Bell Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillCenterBellToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
DrillChamferBoringBarTool
Represents a Chamfer Boring Bar Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillChamferBoringBarTool(nxopen.cam.CAMObject) Created in NX11.0.1 |
DrillCoreToolBuilder
Represents a drill core Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillCoreToolBuilder(nxopen.cam.CAMObject) Created in NX9.0.0 |
DrillCounterboreToolBuilder
Represents a drill counterbore Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillCounterboreToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
DrillCtskToolBuilder
Represents a Drill Ctsk Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillCtskToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
DrillGeomBuilder
Represents a DrillGeom Builder
To create a new instance of this class, use NCGroupCollection.createDrillGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
DrillMethodBuilder
Represents a Drill Method Builder
To create a new instance of this class, use NCGroupCollection.createDrillMethodBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
DrillReamerToolBuilder
Represents a drill Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillReamerToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
DrillSpotdrillToolBuilder
Represents a drill spotdrill Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillSpotdrillToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
DrillSpotfaceToolBuilder
Represents a drill spotface tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillSpotfaceToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
DrillStdToolBuilder
Represents a drill std Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillStdToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
DrillStepToolBuilder
Represents a drill step Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillStepToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
DrillSurfaceBuilder
Represents a Drill Surface Builder
This is an abstract class and cannot be instantiated. |
DrillSurfaceBuilder.SurfaceType
Drill surface type
|
DrillTapToolBuilder
Represents a drill tap Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillTapToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
DrillTapToolBuilder.ToolTapHolderTypeTypes
tap holder type
|
DrillTapToolBuilder.ToolThreadFormMethodTypes
thread form method
|
DrillThreadMillToolBuilder
Represents a drill thread mill Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillThreadMillToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
DrillThreadMillToolBuilder.ToolFormTypeTypes
form type
|
DrillToolBuilder
Represents a drill Tool Builder
This is an abstract class, and cannot be instantiated. |
DriveChainItemBuilder
Represents the Drive Chain Item Builder
This cannot be instantiated . |
DriveChainItemBuilderList
Represents a list of objects.
|
DriveMode
Drive Mode Builder .
|
DriveMode.Type
Available types for Drive Mode .
|
EdgeFinish
Represents a Blade Finish Drive Method Builder .
|
EditSubopCommand
Represents an Edit Subop Command Builder .
|
EditSubopCommand.ContainmentTypes
Available types for containment
|
EditSubopCommand.PointTypes
Available types for point
|
EngravingBuilder
Represents a Engraving Builder
To create a new instance of this class, use OperationCollection.createEngravingBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
ExtendAtEdges |
FaceMilling
Represents a Face Milling Operation
To create or edit an instance of this class, use FaceMillingBuilder Created in NX7.5.0 |
FaceMillingBuilder
Represents a FaceMilling Builder
To create a new instance of this class, use OperationCollection.createFaceMillingBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
FacesSequence
Represents faces sequence .
|
FacesSequence.Types
The faces sequence options .
|
FeatureBasedGeomBuilder
Represents a FeatureBasedGeom Builder
To create a new instance of this class, use NCGroupCollection.createFeatureBasedGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
FeatureGeomBuilder
Represents a FeatureGeom Builder
This is an abstract class, and cannot be instantiated. |
FeatureGeomBuilder.MaterialData
This class holds the data returned from
FeatureGeomBuilder.getMaterialData() |
FeatureGeometry
Represents a Base Geometry Group
To create or edit an instance of this class, use FeatureGeomBuilder Created in NX7.5.0 |
FeatureGeometryGroup
Represents a CAM Feature Group
To obtain an instance of this class use FeatureRecognitionBuilder Created in NX8.0.0 |
FeatureGeometryGroup.ProcessStatus
Update status of the feature
|
FeatureGroupBuilder
Represents a FeatureBasedGeom Builder
To create a new instance of this class, use NCGroupCollection.createFeatureGroupBuilder(nxopen.cam.CAMObject) Created in NX9.0.3 |
FeatureMillingBuilder
Represents a FeatureMilling Builder
To create a new instance of this class, use OperationCollection.createFeatureMillingBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
FeatureMillingCutParameters
Represents a FeatureMillingCutParameters Builder .
|
FeatureMillingCutParameters.CuttingDirectionTypes
cut direction options .
|
FeatureProcessBuilder
The Create Feature Process Builder class creates operations and features groups
To create a new instance of this class, use CAMSetup.createFeatureProcessBuilder() Default values. |
FeatureProcessBuilder.CreateFeatureProcessesData
This class holds the data returned from
FeatureProcessBuilder.createFeatureProcesses(nxopen.cam.CAMFeature[]) |
FeatureProcessBuilder.FeatureGroupingType
Determines how features are allocated to feature groups
|
FeatureProcessBuilder.FeatureProcessType
Type of creation
|
FeatureProcessBuilder.RecreateFeatureProcessesData
This class holds the data returned from
FeatureProcessBuilder.recreateFeatureProcesses(nxopen.cam.FeatureGeometryGroup[]) |
FeatureProcessBuilder.TemplateData
This class holds the data returned from
FeatureProcessBuilder.getTemplate() |
FeatureRecognitionBuilder
Represents a FeatureRecognition Builder
To create a new instance of this class, use CAMSetup.createFeatureRecognitionBuilder(nxopen.cam.CAMObject) Created in NX6.0.0 |
FeatureRecognitionBuilder.GeometrySearch
the geometry search type
|
FeatureRecognitionBuilder.RecognitionEnum
the type of feature search
|
FeatureTeaching
Represents a FeatureTeaching Builder
To create a new instance of this class, use CAMSetup.createFeatureTeaching(nxopen.cam.CAMObject) Created in NX8.0.0 |
FeatureTeaching.RuleMatchOptionType
Rule Option types
|
FeedRapidOutputMode
The type for rapid feed output mode .
|
FeedRateUnit
The unit of feed rate (please cf.
|
FeedsBuilder
Represents a feeds Builder .
|
FeedsBuilder.RecalcuateBasedOn
The recalculation based on attribute .
|
FeedsOptimizationData |
FeedsOptimizationData.FeedRateRangeType
The Feed Rate Range options
|
FeedsOptimizeBuilder
Represents a
FeedsOptimizeBuilder
a "commit" of this object will perform the Feed Rate Optimization. |
FeedsTurnBuilder
Represents a turning feeds Builder .
|
FeedsWedmBuilder
Represents a wedm feeds Builder .
|
FeedsWedmBuilder.OutputTypes
the feed rate output mode .
|
FinishDwell |
FinishDwell.Types
The dwell after finish/profile cut mode options .
|
FinishPassesBuilder
Represents a FinishPasses Builder
This is an abstract class, and cannot be instantiated. |
FinishTurningBuilder
Represents a FinishTurning Builder
To create a new instance of this class, use OperationCollection.createFinishTurningBuilder(nxopen.cam.CAMObject) Created in NX6.0.0 |
FirstPlunge
Represents the first plunge .
|
FirstPlunge.Positions
the first plunge positions .
|
FlowBuilder
Represents a FlowBuilder Builder
This is an abstract class and cannot be instantiated. |
FlowBuilder.FlowEditTypes
Available types for Flow Cut/Manual Assembly in scop
|
FlowBuilder.FlowOffsetModeType
Available types for Flow Cut/Offset Mode in scop
|
FlowCutSteepContainment
Represents a Steep Containment Builder .
|
FlowCutSteepContainment.CutDirectionTypes
Available types for Cut Direction in Flow Cut
|
FlowCutSteepContainment.CutLevelTypes
cut level types .
|
FlowCutSteepContainment.PatternDirectionTypes
Available types for Pattern Direction in Flow Cut
|
FlowCutSteepContainment.SteepCutDirectionTypes
Available types for Steep Cut Direct in Flow Cut
|
FollowCurveMoveBuilder
Represents the Follow Curve Move Builder
To create a new instance of this class, use MoveCollection.createFollowCurveMoveBuilder(nxopen.cam.Move) Default values. |
FollowGeometryMoveBuilder
Represents the Follow Geometry Move Builder
This is an abstract class, and cannot be created. |
FollowPartMoveBuilder
Represents the Follow Part Move Builder
To create a new instance of this class, use MoveCollection.createFollowPartMoveBuilder(nxopen.cam.Move) Default values. |
FollowPartMoveBuilder.MoveDirectionTypes
Available types for manual move path direction in GMC operation
|
FormEdgesBuilder
Represents a FormEdges Builder .
|
FormEdgesBuilder.Data
This class holds the data returned from
FormEdgesBuilder.get(int) |
FormToolBuilder
Represents a Form tool builder
To create a new instance of this class, use NCGroupCollection.createFormToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
GenericToolBuilder
Represents a Generic Tool Builder
To create a new instance of this class, use NCGroupCollection.createGenericToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
GenericTrackingBuilder
Represents a GenericTracking Builder
To create a new instance of this class, use Tool.createGenericTrackingBuilder(nxopen.cam.SolidTrackPoint) Created in NX5.0.0 |
Geometry
Represents a CAM geometry object .
|
GeometryCiBuilder
Represents a geometry ci Builder .
|
GeometryGroup
Represents a CAM geometry builder for group level .
|
GeometryGroup.BlankDefinitionTypes
the blank definition types
|
GeometryGroup.DirectionTypes
the derived blank direction types
|
GeometryGroup.OrientationTypes
the derived blank orientation types
|
GeometryGroup.PositionTypes
the ipw position types
|
GeometrySet
Represents a geometry set for a CAM object.
|
GeometrySet.LoopsIgnoreTypes
Deprecated.
Deprecated in NX9.0.0. Use
PatchOpeningsBuilder instead.
|
GeometrySet.MaterialSideTypes
Available types for Material Side .
|
GeometrySetList
Represents a list of objects.
|
GmcOpBuilder
Represents a GmcOp Builder
To create a new instance of this class, use OperationCollection.createGmcopBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
GougeCheckBuilder
Represents a
GougeCheckBuilder . |
GougeCheckBuilder.GougeCheckStock
the gouge check stock options
|
GougeCheckBuilder.ToolShapeType
the tool shape options
|
GougeCheckResults
Represents the gouge results data .
|
GougeCheckResults.Constants
Constants for Gouge Results
|
GougeCheckResults.Option
Defines the gouge checking type
|
GrooveMillingBuilder
Represents a GrooveMillingBuilder
To create a new instance of this class, use OperationCollection.createGrooveMillingBuilder(nxopen.cam.CAMObject) Created in NX9.0.0 |
GrooveMillingBuilder.LevelSequencingType
Available types for level sequencing
|
GrooveToolBuilder
Represents a Groove tool builder
To create a new instance of this class, use NCGroupCollection.createGrooveToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
GrooveToolBuilder.HolderGrooveHands
The available holder groove hand options for groove tools
|
GrooveToolBuilder.HolderHands
The available holder hand options for groove tools
|
GrooveToolBuilder.HolderStyles
The available holder style options for groove tools
|
GrooveToolBuilder.InsertShapes
The available insert shapes for groove tools
|
GroupFeatures
Represents the group features command
To create a new instance of this class, use NCGroupCollection.createGroupFeatures() Default values. |
GroupFeatures.FeaturesToGroupTypes
Available types for the features to group
|
GuidedCurveBuilder
Represents a Guided Curve Drive Method Builder .
|
GuidedCurveBuilder.GcCutPatternTypes
Available types for Guided Curve cut pattern
|
GuidedCurveCutOrder
Represents a guided curve cut order builder
This is an abstract class and cannot be instantiated. |
GuidedCurveCutOrder.CutOrderOption
Enum of Cut order
|
GuidingCurvesCutDir
Represents a guiding curves cut dir type
This is an abstract class and cannot be instantiated. |
GuidingCurvesCutDir.Option
Enum of guiding curves cut direction
|
HolderSectionBuilder
Represents a Holder Section Builder .
|
HolderSectionBuilder.AllParametersData
This class holds the data returned from
HolderSectionBuilder.getAllParameters(nxopen.NXObject) |
HolderSectionBuilder.Data
This class holds the data returned from
HolderSectionBuilder.get(nxopen.NXObject) |
HoldingSystemBuilder
Represents a
HoldingSystemBuilder
This is an abstract class, and cannot be instantiated. |
HoldingSystemBuilderList
Represents a list of objects.
|
HoleBossGeom
Represents a CAM geometry builder
This is an abstract class and cannot be instantiated. |
HoleBossGeom.DepthLimitTypes
Deprecated.
Deprecated in NX8.0.0. The property that used this enum is replaced by
HoleBossSet.depthLimit() .
|
HoleBossGeom.FormData
This class holds the data returned from
HoleBossGeom.getForm() |
HoleBossGeom.FormPitchTypes
the form and pitch types .
|
HoleBossGeom.FormTypes
the Form types .
|
HoleBossGeom.HoleBossTypes
the hole or boss types .
|
HoleBossGeom.OptimizationTypes
the optimization types .
|
HoleBossGeom.RotationTypes
the rotation types .
|
HoleBossGeometry
Represents a CAM geometry builder
To create a new instance of this class, use NCGroupCollection.createHoleBossGeometryBuilder(nxopen.cam.CAMObject) Created in NX7.5.0 |
HoleBossSet
Represents a Cut Area Geometry builder
To create a new instance of this class, use HoleBossGeom.createHoleBossBuilder(nxopen.NXObject[], double, double, nxopen.NXObject, int) Created in NX7.5.0 |
HoleBossSet.DepthLimitTypes
the depth limit types .
|
HoleBossSetList
Represents a list of objects.
|
HoleDrillingBuilder
Represents a HoleDrillingBuilder Builder
To create a new instance of this class, use OperationCollection.createHoleDrillingBuilder(nxopen.cam.CAMObject) Created in NX9.0.0 |
HoleDrillingBuilder.ControlPointOffsetType
Available types for control point offset
|
HoleDrillingBuilder.IntersectionStrategyType
Available types for intersection strategy
|
HoleDrillingBuilder.RetractOutputModeType
Available types for canned retract output mode
|
HoleDrillingCutParameters
Represents a HoleDrillingCutParameters Builder .
|
HoleMachiningBuilder
Represents a HoleMachiningBuilder Builder
This is an abstract class and cannot be instantiated. |
HoleMachiningCutParameters
Represents a HoleMachiningCutParameters Builder
This is an abstract class and cannot be instantiated. |
HoleMakingBuilder
Represents a HoleMaking Builder
To create a new instance of this class, use OperationCollection.createHoleMakingBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
HoleMakingBuilder.ControlPointTypes
Available types for Control Point Type in Hole Making Operation
|
HoleMakingBuilder.ModelDepthTypes
Available types for model depth in Hole Making Operation
|
HoleMakingBuilder.ToolAxisTypes
the tool axis mode options
|
HubFinish
Represents a Hub Finish Drive Method Builder .
|
InferredDouble
Represents a builder for an inferred value in of a CAM.CAMObject
Created in NX7.5.0 |
InferredDouble.Lock
the lock statue .
|
Inheritable2dLength
Represents a builder for an inheritable double value in of a CAM.CAMObject
Created in NX7.5.0 |
InheritableBuilder
Represents a builder for an inheritable value in of a CAM.CAMObject
Created in NX6.0.0 |
InheritableDoubleBuilder
Represents a builder for an inheritable double value in of a CAM.CAMObject
Created in NX5.0.0 |
InheritableFeedBuilder
Represents a builder for an inheritable feed value in of a CAM.CAMObject
Created in NX5.0.0 |
InheritableFeedModeBuilder
Represents a builder for an inheritable enum value in of a CAM.CAMObject
Created in NX8.0.0 |
InheritableIntBuilder
Represents a builder for an inheritable integer value in of a CAM.CAMObject
Created in NX5.0.0 |
InheritableTextBuilder
Represents a builder for an inheritable text value in of a CAM.CAMObject
Created in NX5.0.0 |
InheritableToolDepBuilder
Represents a builder for an inheritable tool dependent value in of a CAM.CAMObject
Created in NX5.0.0 |
Inheritance
The inheritance setting for enum component within status components .
|
InitialProfilePlunge
Represents the initial profile plunge .
|
InitialProfilePlunge.Modes
the initial profile plunge mode .
|
InPathEventDataBuilder
Represents a InPath Event Data Builder
To create a new instance of this class, use WedmCustomBoundaryDataBuilder.createInpathEventDataBuilder() Created in NX5.0.0 |
InPathEventDataBuilder.LocationMethod
InPath Events Location Method Options
|
InPathEventDataBuilderList
Represents a list of objects.
|
InPathEventSetData
Represents in path event
This is a sub-builder class and cannot be directly instantiated . |
InspectionAlignmentAssistantBuilder
Represents a CMM Inspection Alignment Assistant Builder,
this builder's Commit can produce more than one object,
the GetCommittedObjects can be used to get the objects
and the order of GetCommittedObject's output array is not stable.
|
InspectionAlignmentAssistantBuilder.AlignType
Alignment type
|
InspectionAlignmentAssistantBuilder.Direction
Alignment direction
|
InspectionAlignmentAssistantBuilder.FeatureType
Alignment feature type
|
InspectionAlignmentAssistantBuilder.IterativeTypes
Iterative Alignment type
|
InspectionAlignmentAssistantBuilder.State
Alignment feature state
|
InspectionAlignmentBuilder
Represents a CMM Inspection Alignment builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionAlignmentBuilder(nxopen.cam.CAMObject) Created in NX7.5.2 |
InspectionAlignmentBuilder.AlignmentDirections
Alignment directions of datum features
|
InspectionAlignmentBuilder.AlignTypes
Alignment Operation Type
|
InspectionAlignmentBuilder.IterDevTypes
Iterate deviation type
|
InspectionAlignmentBuilder.RecallStates
PCS state to recall, either internal or external
|
InspectionAlignmentBuilder.RotateTableDirections
Rotary table direction
|
InspectionAlignmentBuilder.RotateTableMethods
Rotary Table methods
|
InspectionAlignmentBuilder.RotateTablePcsUpdateOptions
Rotary table PCS Update options
|
InspectionAlignmentBuilder.RotationAxisOptions
PCS Axis to Rotate about
|
InspectionAlignmentBuilder.RotationDirections
Direction to rotate about
|
InspectionAlignmentBuilder.RotationMethods
PCS Rotation method
|
InspectionAlignmentBuilder.SaveStates
PCS state to save, either Actual or nominal
|
InspectionAlignmentBuilder.XtMethods
PCS Translation method in X direction
|
InspectionAlignmentBuilder.YtMethods
PCS Translation method in Y direction
|
InspectionAlignmentBuilder.ZtMethods
PCS Translation method in Z direction
|
InspectionAnalyzeBuilder
Inspection Analyze options dialog builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionAnalyzeBuilder(nxopen.cam.CAMObject) Created in NX8.5.0 |
InspectionAnalyzeBuilder.DofTypes
Inspection Analysis Degrees of Freedom Types
|
InspectionAnalyzeOutputBuilder
Inspection Analyze Output options dialog builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionAnalyzeOutputBuilder(nxopen.cam.CAMObject) Created in NX8.5.1 |
InspectionAnalyzeOutputBuilder.OutputFormatType
Inspection Analysis Output Format Types
|
InspectionAnalyzeOutputBuilder.ReportingCsysType
Inspection Analysis Output Reporting Csys Types
|
InspectionArcFeatureBuilder
Represents a CMM Inspection Arc Feature builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionArcFeatureBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
InspectionAxisExtrapolationModeBuilder
Represents a builder for an inheritable axis extrapolation mode enum value .
|
InspectionCircleFeatureBuilder
Represents a CMM Inspection Circle Feature builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionCircleFeatureBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
InspectionCmmCommandBuilder
Represents a CMM Inspection miscellaneous command builder.
|
InspectionCmmCommandBuilder.AngularUnitsOptions
Angular units specifications
|
InspectionCmmCommandBuilder.CommandTypes
The type of CMM command to be entered
|
InspectionCmmCommandBuilder.DeviceTypeOptions
Device Type specifications
|
InspectionCmmCommandBuilder.HomePtMethods
The method used to specify the home point
|
InspectionCmmCommandBuilder.IdnameMethods
Naming method
|
InspectionCmmCommandBuilder.LinearUnitsOptions
Linear units specifications
|
InspectionCmmCommandBuilder.MoveTypes
The type of move
|
InspectionCmmCommandBuilder.ProgramNameMethods
Program name
|
InspectionCmmCommandBuilder.PromptVars
User prompt variable
|
InspectionCmmCommandBuilder.QisvarTypes
QIS variable type
|
InspectionCmmCommandBuilder.RevMethods
Revision method
|
InspectionCmmCommandBuilder.TemperatureUnitsOptions
Temperature units specifications
|
InspectionCmmCommandBuilder.VarScopes
Sets variable scope
|
InspectionCmmCommandBuilder.VarTypes
Variable type
|
InspectionCollisionAvoidanceBuilder
Collision Avoidance Dialog builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionCollisionAvoidanceBuilder(nxopen.cam.CAMObject) Created in NX8.0.0 |
InspectionConeFeatureBuilder
Represents a CMM Inspection Cone Feature builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionConeFeatureBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
InspectionConstructedFeatureBuilder
Represents a CMM Inspection Constructed Feature Builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionConstructedFeatureBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
InspectionConstructedFeatureBuilder.AvailableStateType
State of features in available feature list
|
InspectionConstructedFeatureBuilder.ConstFeatType
Type of feature to be constructed
|
InspectionConstructedFeatureBuilder.CurrentStateType
State of features in current feature list
|
InspectionConstructedFeatureBuilder.DesignCreationType
Design feature creation types
|
InspectionConstructedFeatureBuilder.DestPcsEnumType
Specifies if the destination PCS is the current PCS or a user specified nominal or actual PCS
|
InspectionConstructedFeatureBuilder.DirectionType
Specifies whether a minimum or maximum point are found using a user specified direction vector or a radial direction vector
|
InspectionConstructedFeatureBuilder.ExtractEdgeDistanceType
Specifies whether an extract edge distance is absolute part units or a percentage
|
InspectionConstructedFeatureBuilder.MethodEnumType
Construction Method
|
InspectionConstructedFeatureBuilder.SubFeat1StateType
State of subfeatures
|
InspectionConstructedFeatureBuilder.SubFeat2StateType
State of subfeatures
|
InspectionCparlnFeatureBuilder
Represents a CMM Inspection Cparln Feature Builder.
|
InspectionCparlnFeatureBuilder.EndTypes
The shape of the end of the bounded slot/tab (round or square)
|
InspectionCreatePathsBuilder
Create Paths Dialog builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionCreatePathsBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
InspectionCurveFeatureBuilder
Represents a CMM Inspection Curve Feature builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionCurveFeatureBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
InspectionCurveFeatureBuilder.PointDataDefinitionType
The method used to define point data
|
InspectionCurveFeatureBuilder.StartEndModeType
the method used to define the start and end points
|
InspectionCylinderCircleFitModeBuilder
Represents a builder for an inheritable cylinder/circle fitting mode enum value .
|
InspectionCylinderFeatureBuilder
Represents a CMM Inspection Cylinder Feature builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionCylinderFeatureBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
InspectionDatumPlaneFittingModeBuilder
Represents a builder for an inheritable datum plane fitting mode enum value .
|
InspectionDeleteMeaPtsBuilder
Inspection Delete Analyze Points dialog builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionDeleteMeaPtsBuilderSel(nxopen.cam.CAMObject[]) Created in NX9.0.1 |
InspectionDeltaMoveBuilder
Represents the builder for the CMM Inspection sub-operation Delta Move.
|
InspectionDeltaMoveBuilder.IntentType
Move Intent
|
InspectionEdgePointFeatureBuilder
Represents a CMM Inspection Edge Point Feature builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionEdgePointFeatureBuilder(nxopen.cam.CAMObject) Created in NX9.0.0 |
InspectionGraphicalReportBuilder
Represents the builder for the CMM Inspection Graphical Report Operation
To create a new instance of this class, use InspectionOperationCollection.createGraphicalReportBuilder(nxopen.cam.CAMObject) Created in NX10.0.3 |
InspectionGraphicalReportBuilder.GraphicalReportFilter
Filters for specifying report objects
|
InspectionGraphicalReportBuilder.GraphicalReportFilterType
Types of graphical reports
|
InspectionGraphicalReportOutputBuilder
Represents the builder for Inspection Graphical Report Output.
|
InspectionGraphicalReportOutputBuilder.OutputFormatType
the output format type
|
InspectionGraphicalReportOutputBuilder.PageOrientationType
the page orientation type
|
InspectionGraphicalReportOutputBuilder.PageSizeType
the page size type
|
InspectionGroup
Represents a group for CMM Inspection
To obtain an instance of this class us InspectionGroupCollection Created in NX7.0.0 |
InspectionGroupCollection
Represents the group collection for CMM Inspection
To obtain an instance of this class, refer to InspectionSetup Created in NX7.0.0 |
InspectionImportDmisBuilder
Inspection Import Dmis dialog builder
To create a new instance of this class, use InspectionOperationCollection.createImportDmisBuilder(nxopen.cam.InspectionGroup) Created in NX11.0.1 |
InspectionLimitsOfSizeModeBuilder
Represents a builder for an inheritable limits of size mode enum value .
|
InspectionLinear5axisMoveToPointBuilder
Represents the builder for the CMM Inspection sub-operation Linear 5axis Move To Point.
|
InspectionLinearMoveToPointBuilder
Represents the builder for the CMM Inspection sub-operation Linear Move To Point.
|
InspectionLinearMoveToPointBuilder.PointTypeEnums
specifies the method used to define a point
|
InspectionLineFeatureBuilder
Represents a CMM Inspection Line Feature builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionLineFeatureBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
InspectionLinkPmiBuilder
Create Link PMI Dialog Builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionLinkPmiBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
InspectionLinkPmiBuilder.CollisionAvoidanceEnumType
Specifies whether collision avoidance will be done
|
InspectionLinkPmiBuilder.CreatePathsOptions
Specifies whether paths will be created by Link PMI
|
InspectionLinkPmiBuilder.PathOrderTypes
Specifies the Path Order Optimization Type
|
InspectionLinkPmiBuilder.PmiScopeTypes
Specifies the scope of the link PMI command
|
InspectionLinkPmiBuilder.PointOrderTypes
Specifies the Point Order Optimization Type
|
InspectionMeasDataBuilder
Inspection Measured Data dialog builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionMeasDataBuilder(nxopen.cam.CAMObject) Created in NX8.5.0 |
InspectionMeasDataBuilder.AcceptRejectExternalPointsData
This class holds the data returned from
InspectionMeasDataBuilder.acceptRejectExternalPoints() |
InspectionMeasDataBuilder.BoundingType
Hole/Pin Matching Mode
|
InspectionMeasDataBuilder.DisplayTransformTypes
Transform Display Types
|
InspectionMeasDataBuilder.InputFormatType
Measured Data Input File Format Types
|
InspectionMeasurePointBuilder
Represents the builder for the CMM Inspection sub-operation Measure Point.
|
InspectionMeasurePointBuilder.PointTypes
specifies the method used to define a point
|
InspectionMethodBuilder
Represents the builder for a CMM Inspection method.
|
InspectionMethodBuilder.AxisExtrapolationTypes
the analysis axis extrapolation type
|
InspectionMethodBuilder.CylinderFittingTypes
the analysis cylinder/circle fitting type
|
InspectionMethodBuilder.DatumPlaneFittingTypes
the analysis datum plane fitting type
|
InspectionMethodBuilder.InspectionModes
CMM Inspection modes.
|
InspectionMethodBuilder.LimitsOfSizeTypes
the analysis limits of size fitting type
|
InspectionMethodBuilder.MethodTypes
CMM Inspection method feature type.
|
InspectionMethodBuilder.OperationTypes
CMM Inspection operation types.
|
InspectionMethodBuilder.PointSequenceDirectionTypes
the point sequence start direction
|
InspectionMethodBuilder.PointSequenceModeTypes
the point sequence modes
|
InspectionMethodBuilder.PointSequenceStartTypes
the point sequence start location
|
InspectionMethodBuilder.PolarAngleModeTypes
the polar angle modes
|
InspectionMethodBuilder.PolarPointSequenceTypes
the polar point sequence mode
|
InspectionMethodBuilder.PolarRadiusModeTypes
the polar radius modes
|
InspectionMethodBuilder.PolarSequenceDirectionTypes
the polar sequence direction
|
InspectionMethodBuilder.PolarSequenceStartTypes
the polar sequence start mode
|
InspectionMethodBuilder.ProfileDispositionTypes
the analysis profile disposition fitting type
|
InspectionMethodBuilder.ReferenceFeatureModeTypes
the relative measurement mode
|
InspectionMethodBuilder.ScanCurveModeTypes
the scan curve mode
|
InspectionMethodBuilder.ScanHelixTurnDirectionTypes
the helix turn direction type
|
InspectionMethodBuilder.ScanHelixTurnTypes
the helix turn type
|
InspectionMethodBuilder.ScanModeTypes
the scan mode 3-axis, 5-axis type
|
InspectionMethodBuilder.SurfaceProfileTypes
the analysis surface profile fitting type
|
InspectionMethodBuilder.ToleranceDegreeOfFreedomCsysMode
the tolerance Degree of Freedom Coordinate System mode
|
InspectionMethodBuilder.ToleranceDegreeOfFreedomMode
the tolerance degree of freedom mode
|
InspectionMethodBuilder.TransitionTypes
CMM Inspection transition modes.
|
InspectionMethodBuilder.UVModeTypes
the UV modes
|
InspectionMoveBuilder
Represents CMM Inspection Move Builder
This cannot be instantiated . |
InspectionMoveBuilder.DepthMethodTypes
the depth method
|
InspectionMoveBuilder.ProbeTipTypes
the preferred probe tip type
|
InspectionMoveBuilder.SensorStrategyTypes
the sensor selection strategy
|
InspectionMoveBuilder.TipAngleTypes
the tip angle selection mode
|
InspectionMoveBuilder.TipModeTypes
the tip selection mode
|
InspectionMoveCollection
Represents the Inspection move collection
To obtain an instance of this class, refer to InspectionOperation Created in NX7.0.0 |
InspectionMoveSubop
Represents CMM Inspection Move
To obtain an instance of this class use InspectionMoveCollection Created in NX7.0.0 |
InspectionMoveSubopCollection
Represents the Inspection move collection contained by point set subops
To obtain an instance of this class, refer to InspectionMoveSubop Created in NX7.0.0 |
InspectionOperation
Represents an Inspection operation
To obtain an instance of this class use InspectionOperationCollection Created in NX7.0.0 |
InspectionOperationCollection
Represents the CMM Inspection operation collection
To obtain an instance of this class, refer to InspectionSetup Created in NX7.0.0 |
InspectionOperationTransformBuilder
Create transformed inspection operations,
this builder's Commit can produce more than one object,
the GetCommittedObjects can be used to get the objects
and the order of GetCommittedObject's output array is not stable.
|
InspectionOperationTransformBuilder.Angle
Angle Type
|
InspectionOperationTransformBuilder.Line
Line Type
|
InspectionOperationTransformBuilder.Motion
Motion Type
|
InspectionOperationTransformBuilder.Result
Transform Option
|
InspectionOperationTransformBuilder.Transform
Transform Type
|
InspectionOutputOperationBuilder
this class creates the output operation
To create a new instance of this class, use InspectionOperationCollection.createInspectionOutputOperationBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
InspectionOutputOperationBuilder.TypeOutput
Represents the output operation types
|
InspectionParplnFeatureBuilder
Represents a CMM Inspection Parpln Feature Builder.
|
InspectionPathBuilder
Represents the builder for a CMM Inspection path.
|
InspectionPathBuilder.EntryExitType
the entry/exit flag
|
InspectionPathBuilder.FirstLastType
the first/last flag
|
InspectionPathBuilder.InspectModeType
the inspection mode
|
InspectionPathBuilder.SequenceType
the path point sequence optimization method
|
InspectionPathPointBuilder.PointData
This class holds the data returned from
InspectionPathPointBuilder.getPointData(int) |
InspectionPatternFeatureBuilder
Represents a CMM Inspection Pattern Feature builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionPatternFeatureBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
InspectionPatternFeatureBuilder.FeatureFilterTypes
Filter for the list of available inspection features for inclusion in the pattern.
|
InspectionPlaneFeatureBuilder
Represents a CMM Inspection Plane Feature builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionPlaneFeatureBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
InspectionPointFeatureBuilder
Represents a CMM Inspection Point Feature builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionPointFeatureBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
InspectionPolarGridBuilder
Represents the builder for the CMM Inspection Polar Grid sub-operation.
|
InspectionProbeTipTypeBuilder
Represents a builder for an inheritable probe tip type value .
|
InspectionProbeToolBuilder
Represents an Inspection Probe Tool Builder
To create a new instance of this class, use InspectionGroupCollection.createInspectionProbeToolBuilder(nxopen.cam.CAMObject) Created in NX9.0.0 |
InspectionProbeTrackingBuilder
Represents a InspectionProbeTracking builder
To create a new instance of this class, use InspectionTool.createInspectionProbeTrackingBuilder(nxopen.cam.ProbeTrackPoint) Created in NX9.0.0 |
InspectionProbeTrackingBuilder.TipTypes
the tip type
|
InspectionProfileDispositionModeBuilder
Represents a builder for an inheritable profile disposition mode enum value .
|
InspectionReferenceFeatureModeBuilder
Represents a builder for an inheritable reference feature mode enum value .
|
InspectionSaveToLayerBuilder
Inspection Analyze Save to Layer dialog builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionSaveToLayerBuilderSel(nxopen.cam.CAMObject[]) Created in NX9.0.1 |
InspectionScanArcBuilder
Represents the builder for the CMM Inspection sub-operation Scan Arc.
|
InspectionScanCurve5AxisBuilder
Represents the builder for the CMM Inspection sub-operation Scan Curve.
|
InspectionScanCurveBuilder
Represents the builder for the CMM Inspection sub-operation Scan Curve.
|
InspectionScanHelixBuilder
Represents the builder for the CMM Inspection sub-operation Scan Helix.
|
InspectionScanLineBuilder
Represents the builder for the CMM Inspection sub-operation Scan Line.
|
InspectionSensorBuilder
Represents the builder for a CMM Inspection Sensor.
|
InspectionSensorBuilder.SensorTipLocationTypes
the sensor tip location method
|
InspectionSensorBuilder.SensorTipTypes
the sensor tip type
|
InspectionSensorBuilder.SensorTypes
the sensor type
|
InspectionSensorMassEditBuilder
Edit Multiple Subops Dialog builder
To create a new instance of this class, use InspectionMoveCollection.createInspectionSensorMassEditBuilder(nxopen.cam.InspectionMoveSubop) Created in NX7.5.3 |
InspectionSensorMassEditBuilder.SensorSelectModeType
the sensor selection mode
|
InspectionSensorMassEditBuilder.SensorStrategyType
the sensor strategy
|
InspectionSensorStrategyBuilder
Represents a builder for an inheritable sensor strategy enum value .
|
InspectionSetup |
InspectionSetup.RetrieveToolData
This class holds the data returned from
InspectionSetup.retrieveTool(java.lang.String) |
InspectionSphereFeatureBuilder
Represents a CMM inspection sphere feature builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionSphereFeatureBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
InspectionSurfaceFeatureBuilder
Represents a CMM Inspection Curve Feature builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionSurfaceFeatureBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
InspectionSurfaceFeatureBuilder.PointDataDefinitionType
The method used to define point data
|
InspectionSurfaceFeatureBuilder.StartEndModeType
the method used to define the start and end points
|
InspectionSurfaceProfileModeBuilder
Represents a builder for an inheritable datum plane fitting mode enum value .
|
InspectionToleranceOperationBuilder
this class creates the tolerance operation
To create a new instance of this class, use InspectionOperationCollection.createInspectionToleranceOperationBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
InspectionToleranceOperationBuilder.AngleFormat
Angle format
|
InspectionToleranceOperationBuilder.ParamExtent
Extent
|
InspectionToleranceOperationBuilder.ParamPriDatum
Default datum symbols
|
InspectionToleranceOperationBuilder.ParamPriDatumModifier
Primary datum material modifiers
|
InspectionToleranceOperationBuilder.ParamSecDatum
Default datum symbols
|
InspectionToleranceOperationBuilder.ParamSecDatumModifier
Secondary datum material modifiers
|
InspectionToleranceOperationBuilder.ParamSubType
Subtypes
|
InspectionToleranceOperationBuilder.ParamTerDatum
Default datum symbols
|
InspectionToleranceOperationBuilder.ParamTerDatumModifier
Tertiary datum material modifiers
|
InspectionToleranceOperationBuilder.ParamTolMatModifier
Material Condition modifiers
|
InspectionToleranceOperationBuilder.ParamTolMatModifierDup
Material Condition modifiers
|
InspectionToleranceOperationBuilder.ParamTolZoneShape
Tolerance zone shape
|
InspectionToleranceOperationBuilder.ParamXYZAxis
X/Y/Z axis
|
InspectionToleranceOperationBuilder.SirVecPCSABS
PCS or absolute coordinate sysytem
|
InspectionToleranceOperationBuilder.ToleranceSource
Tolerance Source
|
InspectionToleranceOperationBuilder.TolType
Tolerance types
|
InspectionTool
Represents an Inspection group
To obtain an instance of this class use InspectionGroupCollection Created in NX7.0.0 |
InspectionTorusFeatureBuilder
Represents a CMM Inspection Torus Feature builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionTorusFeatureBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
InspectionTrackPointCollection
Represents the inspection track point collection
To obtain an instance of this class, refer to InspectionTool Created in NX7.0.0 |
InspectionUVGridBuilder
Represents the builder for the CMM Inspection UV Grid sub-operation.
|
InspectionUVGridBuilder.SphereAxisType
the method for determining the axis for a sphere
|
InspectionUVGridBuilder.StartPointType
the start point mode
|
InterpolateAngle
Represents builder of Interpolate Angle, one option of Tool Axis .
|
InterpolateVector
Represents builder of Interpolate Vector, one option of Tool Axis .
|
IpwAnalysisBuilder.ColorControl
the color control type options
|
IpwContainmentCurvesBuilder
Represents a
IpwContainmentCurvesBuilder
This is an abstract class, and cannot be instantiated. |
IpwContainmentCurvesBuilder.ThicknessModeValue
the thickness method options
|
LaserCircleCutout
Represents a LaserCircleCutout
To create a new instance of this class, use MoveCollection.createLaserCircleCutout(nxopen.cam.Move) Created in NX9.0.0 |
LaserControlPoint
Represents a Laser Control Point builder
To create a new instance of this class, use LaserProfileMove.createControlPoint(int, nxopen.Point, nxopen.CartesianCoordinateSystem, int, boolean, nxopen.NXObject, int) Created in NX9.0.0 |
LaserControlPoint.ControlPointTypes
the Control Point type .
|
LaserControlPoint.HeadOrientTypes
the Local Head Orientation Enum .
|
LaserControlPoint.ProcessTypes
the Point Process Enumeration .
|
LaserControlPointList
Represents a list of objects.
|
LaserCutDirection
Represents cut direction settings for laser move .
|
LaserCutDirection.Types
the Cut Direction Type enum .
|
LaserCutoutDefinition
Represents cutout definition settings for laser move .
|
LaserCutoutDefinition.Types
the Cutout Definition Type enum .
|
LaserHeadOrientation
Represents head orientation settings for laser sub move .
|
LaserHeadOrientation.Types
the Head Orientation Type enum .
|
LaserHexagonCutout
Represents a LaserHexagonCutout
To create a new instance of this class, use MoveCollection.createLaserHexagonCutout(nxopen.cam.Move) Created in NX9.0.0 |
LaserLinearMove
Represents a LaserLinearMove
To create a new instance of this class, use MoveCollection.createLaserLinearMove(nxopen.cam.Move) Created in NX9.0.0 |
LaserLinearMove.MotionEnds
the Motion End enum
|
LaserLinearMove.MoveTypes
the Move Type enum
|
LaserLinearMove.RefTypes
the Reference Type enum .
|
LaserMethod
Represents a Laser Method
To create a new instance of this class, use NCGroupCollection.createLaserMethod(nxopen.cam.CAMObject) Created in NX9.0.0 |
LaserPiercingPoint
Represents piercing point settings for laser move .
|
LaserPiercingPoint.Types
the Piercing Point enum .
|
LaserProfileMove
Represents a LaserProfileMove
To create a new instance of this class, use MoveCollection.createLaserProfileMove(nxopen.cam.Move) Created in NX9.0.0 |
LaserProfileMove.CollisionChecks
the Collision Check enum .
|
LaserProfileMove.InterpMethods
the Interpolation Method enum .
|
LaserProfileMove.ShapeTypes
the Shape Type enum .
|
LaserProfileMove.ToolSides
the Tool Side enum .
|
LaserRectangleCutout
Represents a LaserRectangleCutout
To create a new instance of this class, use MoveCollection.createLaserRectangleCutout(nxopen.cam.Move) Created in NX9.0.0 |
LaserSlotCutout
Represents a LaserSlotCutout
To create a new instance of this class, use MoveCollection.createLaserSlotCutout(nxopen.cam.Move) Created in NX9.0.0 |
LaserTeachMode
Represents a Laser TeachMode
To create a new instance of this class, use OperationCollection.createLaserTeachMode(nxopen.cam.CAMObject) Created in NX9.0.0 |
LaserTool
Represents a Laser Tool
To create a new instance of this class, use NCGroupCollection.createLaserTool(nxopen.cam.CAMObject) Created in NX9.0.0 |
LatheMachineControlBuilder
Represents a LatheMachineControl Builder
To create a new instance of this class, use OperationCollection.createLatheMachineControlBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
LatheUserDefinedBuilder
Represents a LatheUserDefined Builder
To create a new instance of this class, use OperationCollection.createLatheUserDefinedBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
LayoutCiBuilder
Represents a layout ci Builder .
|
LeadAngles
Represents a lead angles .
|
LeadAngles.ControlTypes
Available types for lead angle control type
|
LevelToLevel |
LevelToLevel.Types
Available types for level to level method
|
LowerLimit |
LowerLimit.ActionTypes
Available types for Lower Limit Actions
|
LowerLimit.ModeTypes
Available types for Lower Limit Mode
|
MachineGroupBuilder
Represents a MachineGroup Builder
To create a new instance of this class, use NCGroupCollection.createMachineGroupBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
MachineGroupBuilder.RetrieveToolPocketInformation
retrieve tool pocket information flag.
|
MachineHeadGroupBuilder
Represents a MachineHeadGroup Builder
To create a new instance of this class, use NCGroupCollection.createMachineHeadGroupBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
MachinePocketGroupBuilder
Represents a MachinePocketGroup Builder
To create a new instance of this class, use NCGroupCollection.createMachinePocketGroupBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
MachinePocketGroupBuilder.RegisterType
Deprecated.
Deprecated in NX8.5.0. This
MachinePocketGroupBuilder.RegisterType is no longer supported.
|
MachineTurretGroupBuilder
Represents a MachineTurretGroup Builder
To create a new instance of this class, use NCGroupCollection.createMachineTurretGroupBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
MachineTurretGroupBuilder.MctTurrentWplTypes
WorkPlane Type
|
ManageToolPartBuilder
Represents an Export Tool Part Builder
This is an abstract class, and cannot be instantiated. |
ManageToolPartBuilder.AskR1ToolTipJunctionData
This class holds the data returned from
ManageToolPartBuilder.askR1ToolTipJunction() |
ManageToolPartBuilder.AskToolTipJunctionData
This class holds the data returned from
ManageToolPartBuilder.askToolTipJunction() |
ManualControlBuilder
Represents a ManualControl Operation Builder
To create a new instance of this class, use OperationCollection.createManualControlBuilder(nxopen.cam.CAMObject) Created in NX10.0.3 |
ManualFeatureBuilder
Represents a
ManualFeatureBuilder
To obtain an instance of this class use FeatureRecognitionBuilder Created in NX6.0.0 |
ManualFeatureBuilderList
Represents a list of objects.
|
ManualMove
Represents Manual Move
To obtain an instance of this class us OperationCollection Created in NX4.0.0 |
MapFeatureTeaching
Represents a MapFeatureTeaching Builder
To create a new instance of this class, use CAMSetup.createMapFeatureTeaching(nxopen.cam.CAMObject) Created in NX10.0.3 NX_REMOVE_FROM_JAVA_API |
MaxCutTraverse |
MaxCutTraverse.Types
Available types for max cut traverse
|
MergeSubopCommand
Represents an Merge Subop Command Builder .
|
MethodBuilder
Represents a Method Builder
This is an abstract class, and cannot be instantiated. |
MillAreaGeomBuilder
Represents a MillAreaGeom Builder
To create a new instance of this class, use NCGroupCollection.createMillAreaGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
MillBoundaryGeomBuilder
Represents a MillBoundaryGeom Builder
To create a new instance of this class, use NCGroupCollection.createMillBoundaryGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
MillCutParameters |
MillFormToolBuilder
Represents a MillForm Tool Builder
To create a new instance of this class, use NCGroupCollection.createMillFormToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
MillGeomBuilder
Represents a MillGeom Builder
To create a new instance of this class, use NCGroupCollection.createMillGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
MillingToolBuilder
Represents a MillingTool Builder
This is an abstract class, and cannot be instantiated. |
MillingToolBuilder.ToolDirectionTypes
Available types for tool direction milling tool
|
MillingTrackpointBuilder
Represents a Milling Trackpoint Builder .
|
MillingTrackpointBuilder.AddData
This class holds the data returned from
MillingTrackpointBuilder.add(int, java.lang.String, double, double, double, int, int, int, int, int) |
MillingTrackpointBuilder.CalculateDistanceData
This class holds the data returned from
MillingTrackpointBuilder.calculateDistance(int) |
MillingTrackpointBuilder.Data
This class holds the data returned from
MillingTrackpointBuilder.get(nxopen.NXObject) |
MillingTrackpointBuilder.TrackPointData
This class holds the data returned from
MillingTrackpointBuilder.getTrackPoint(int) |
MillingTrackpointBuilder.Types
the definition enum .
|
MillMachineControlBuilder
Represents a MillMachineControl Builder
To create a new instance of this class, use OperationCollection.createMillMachineControlBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
MillMethodBuilder
Represents a Mill Method Builder
To create a new instance of this class, use NCGroupCollection.createMillMethodBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
MillOperation
Represents a Mill operation
To create or edit an instance of this class, use MillOperationBuilder Created in NX7.5.0 |
MillOperationBuilder
Represents a MillOperation Builder
This is an abstract class and cannot be instantiated. |
MillOperationBuilder.WallCleanupTypes
the wall cleanup modes .
|
MillOrientGeomBuilder
Represents a MillOrientGeom Builder
To create a new instance of this class, use NCGroupCollection.createMillOrientGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
MillOrientGeomBuilder.LowerLimitModes
The lower limit mode options .
|
MillTextGeomBuilder
Represents a MillTextGeom Builder
To create a new instance of this class, use NCGroupCollection.createMillTextGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
MillToolBuilder
Represents a Mill Tool Builder
To create a new instance of this class, use NCGroupCollection.createMillToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
MillToolBuilder.CutterSubtypes
Available types for mill tool subtype
|
MillToolProbingBuilder
Represents a Mill Tool Probing Builder
To create a new instance of this class, use OperationCollection.createMillToolProbingBuilder(nxopen.cam.CAMObject) Created in NX8.5.1 |
MillUserDefinedBuilder
Represents a MillUserDefined Builder
To create a new instance of this class, use OperationCollection.createMillUserDefinedBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
MillVolumeGeomBuilder
Represents a MillVolumeGeom Builder
To create a new instance of this class, use NCGroupCollection.createMillVolumeGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
MinCutDepth |
MinCutDepth.Types
the mininmum cut depth options .
|
MinCutLength
Represents a
MinCutLength |
MinCutLength.Types
the mininmum cut length options .
|
MinCutVolume |
MirrorBuilder
Represents a Mirror Builder.
|
Move |
MoveBuilder
Represents Move Builder
This cannot be instantiated . |
MoveBuilder.Feed
the feed Type
|
MoveBuilder.Motion
the motion Type
|
MoveCollection
Represents the move collection
To obtain an instance of this class, refer to Operation Created in NX5.0.0 |
MoveToPointBuilder
Represents the Move To Point Builder
To create a new instance of this class, use MoveCollection.createMoveToPointBuilder(nxopen.cam.Move) Created in NX5.0.0 |
MultiBladeBaseGeometry
Represents a selectoin geometry Builder
This is an abstract class and cannot be instantiated. |
MultiBladeGeomBuilder
Represents a MultiBladeGeomBuilder Builder
To create a new instance of this class, use NCGroupCollection.createMultiBladeGeometryBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
MultiBladeGeomBuilder.PartAxisOfRotationTypes
Available types for Part Axis of Rotation
|
MultiBladeSplittersGeometry
Represents a selectoin list geometry Builder
This is an abstract class and cannot be instantiated. |
MultiDepthCut |
MultiDepthCut.Types
Available types for Multi-Depth cut type
|
MultiplePassesBuilder
Represents a MultiplePassesBuilder .
|
MultiplePassesBuilder.OrderTypes
Available types for Order
|
MultiplePassesBuilder.StepMethodTypes
Available types for Step Method
|
MultipleStepoverBuilder
Represents a Builder which holds the data for a set of individual number of passes and
stepover distance.
|
MultipleStepoverBuilder.Data
This class holds the data returned from
MultipleStepoverBuilder.getData(int) |
MultiRamp |
MultiRamp.Types
the multi ramp pattern types .
|
MultiToolBuilder
Represents a MultiTool Builder
To create a new instance of this class, use NCGroupCollection.createMultiToolBuilder(nxopen.cam.CAMObject) Created in NX11.0.1 |
NCAssistantBuilder
Represents a NCAssistant Builder
To create a new instance of this class, use CAMSetup.createNCAssistantBuilder() Default values. |
NCAssistantBuilder.AnalysisTypes
Analysis Type
|
NCAssistantBuilder.ResultsData
This class holds the data returned from
NCAssistantBuilder.getResults() |
NCGroup |
NCGroupBuilder
Represents a NCGroup Builder
This is an abstract class, and cannot be instantiated. |
NCGroupCollection
Represents the ncgroup collection
To obtain an instance of this class, refer to CAMSetup Created in NX4.0.0 |
NCGroupCollection.UseDefaultName
Whether use the default name in creation
|
NcmAvoidancePointBuilder |
NcmAvoidancePointBuilder.PointStates
the types available for avoidance point definition
|
NcmAvoidancePointBuilder.ToolAxisUsages
the types available for tool axis status
|
NcmClearanceBuilder |
NcmClearanceBuilder.ClearanceTypes
the types available for clearance
|
NcmctPartMountingBuilder
Represents a
NcmctPartMountingBuilder
a "commit" of this object will perform the Part Mounting and no object is returned. |
NcmctPartMountingBuilder.LayerTypes
Available types for layer options
|
NcmctPartMountingBuilder.PositioningTypes
Available types for positioning
|
NcmEngRetBuilder.EngageRetractTypes
Available types for engage/retract in surface contouring
|
NcmHoleMachining |
NcmHoleMachining.CutcomTypes
Available types for cutter compensation in hole machining
|
NcmHoleMachining.FinalTypes
Available types for final clearance in hole machining
|
NcmHoleMachining.InitialTypes
Available types for initial clearance in hole machining
|
NcmHoleMachining.OverlapTypes
Available types for overlap types
|
NcmHoleMachiningEngRet
Represents a builder for an inheritable double value in of a CAM.CAMObject
Created in NX7.5.0 |
NcmHoleMachiningEngRet.EngRetTypes
Available types for engage/retract in Planar Milling
|
NcmLaserEngage
Represents Engage settings for laser non cutting moves .
|
NcmLaserEngage.Type
the Engage Type enum .
|
NcmLaserRetract
Represents Retract settings for laser non cutting moves .
|
NcmLaserRetract.Type
the Retract Type enum .
|
NcmOptimizeGroup |
NcmPlanarBuilder |
NcmPlanarBuilder.CutcomTypes
Available types for cutter compensation in planar milling
|
NcmPlanarBuilder.FinalRet
Available strategies for final retract in planar milling
|
NcmPlanarBuilder.FinalTypes
Available types for final clearance in planar milling
|
NcmPlanarBuilder.InitialEng
Available strategies for initial engage in planar milling
|
NcmPlanarBuilder.InitialTypes
Available types for initial clearance in planar milling
|
NcmPlanarBuilder.PredrillPointsOutputOptions
Available options for output of pre-drill points in planar milling
|
NcmPlanarBuilder.TransferBetweenLevelsTypes
Available types for transfer between levels in planar milling
|
NcmPlanarBuilder.TransferBetweenRegionsTypes
Available types for transfer between regions in planar milling
|
NcmPlanarBuilder.TransferWithinLevelsTypes
Available types for transfer within levels in planar milling
|
NcmPlanarBuilder.TransferWithinLevelsWiths
Available strategies for transfer within levels in planar milling
|
NcmPlanarEngRetBuilder
Represents a builder for an inheritable double value in of a CAM.CAMObject
Created in NX5.0.0 |
NcmPlanarEngRetBuilder.EngRetTypes
Available types for engage/retract in Planar Milling
|
NcmPlanarEngRetBuilder.IfEngageDoesNotFitTypes
Available types to handle area if engage does not fit
|
NcmPlanarEngRetBuilder.MeasureHeightFrom
Available types for the Height From which engage helical/ramp/plunge
is measured in Planar Milling
|
NcmPlanarEngRetBuilder.MinClearanceTypes
Available types for the Minimum Clearance
|
NcmScBuilder |
NcmScBuilder.SmoothingOptions
Available options for smoothing behavior
|
NcmScEngRetBuilder
Represents a builder for an inheritable double value in of a CAM.CAMObject
Created in NX5.0.0 |
NcmScEngRetBuilder.EngRetTypes
Available types for engage/retract in surface contouring
|
NcmScEngRetBuilder.MeasureFromTypes
Available types for the Height or Length from which the linear/helical/plunge
engage or linear/plunge retract is measured in Surface Contour Milling .
|
NcmSmoothingBuilder |
NcmSmoothingBuilder.SmoothToleranceSources
Available tolerance types for smoothing
|
NcmSubopBuilder |
NcmSubopBuilder.DefaultRegionStartTypes
Available types for default region start in subop milling
|
NcmTransfer |
NcmTransfer.TransferTypes
Available types for transfer between regions in planar milling
|
NcmTransferBuilder |
NcmTransferBuilder.AppDepMethodTypes
Available methods for approach and departure
|
NcmTransferBuilder.AppDepToolAxisOptions
Available options for tool axis behavior
|
NcmTransferBuilder.LongMotionTypes
Available motion types for smooth
|
NcmTransferBuilder.TraverseTypes
Available types for traverse
|
NcmTransferTypes |
NcmTransferTypes.FinalTypes
Available types for final clearance in hole machining
|
NcmTransferTypes.InitialTypes
Available types for initial clearance in hole machining
|
NcmTurningBuilder
Represents a CAM.NcmTurningBuilder
Created in NX6.0.0 |
NcmTurnRoughBuilder
Represents a CAM.NcmTurnRoughBuilder
Created in NX6.0.0 |
NcmTurnRoughFinishBuilder
Represents a CAM.NcmTurnRoughFinishBuilder
Created in NX6.0.0 |
NcmTurnThreadBuilder
Represents a CAM.NcmTurnThreadBuilder
Created in NX6.0.0 |
NcmTurnThreadBuilder.LocalReturnMainModes
The Local Return Main modes options .
|
NcmTurnThreadBuilder.LocalReturnModes
The Local Return modes options .
|
NcmTurnThreadBuilder.LocalReturnTypes
The Cut regions type options .
|
NcmWedmBuilder
Represents a CAM.NcmWedmBuilder
Created in NX7.5.0 |
NcmWedmBuilder.CutcomOffTypes
the types available for cutcom off .
|
NcmWedmBuilder.CutcomOnTypes
the types available for cutcom on .
|
NcmWedmBuilder.GlobalStopPointMethodTypes
the types available for stop points method .
|
NcmWedmBuilder.GlobalStopPointTypes
the types available for wedm stop points .
|
NcmWedmBuilder.LeadInMethodTypes
the types available for lead in method .
|
NcmWedmBuilder.LeadOutMethodTypes
the types available for lead out method .
|
NcmWedmBuilder.LeadOutSameAsLeadInTypes
the types available for lead out same as lead in .
|
NcmWedmBuilder.NonTiltLeadInTypes
the types available for non-tilt lead in .
|
NormalToToolAxisMoveBuilder
Represents the Move To Point Builder
To create a new instance of this class, use MoveCollection.createNormalToToolAxisMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
NormalToToolAxisMoveBuilder.Orientation
the normal orientation
|
Notes
Represents notes .
|
ObjectContainer
Represents a Cam Objects Builder .
|
ObjectNotes
Represents an Object Notes
To create a new instance of this class, use CAMSetup.createObjectNotes(nxopen.cam.CAMObject) Created in NX9.0.0 |
ObjectsFeedsBuilder
Represents an Object Action Feeds Builder
To create a new instance of this class, use CAMSetup.createFeedsBuilder(nxopen.cam.CAMObject[]) Created in NX6.0.0 |
ObjectsUdeSet
Represents an Object Action Ude Set Builder
To create a new instance of this class, use CAMSetup.createObjectsUdeSet(nxopen.cam.CAMObject[], nxopen.cam.CAMSetup.Ude) Created in NX6.0.0 |
ObjectWorkInstructionBuilder
Represents an Object Work Instruction
To create a new instance of this class, use CAMSetup.createObjectWorkInstructionBuilder(nxopen.cam.CAMObject) Created in NX9.0.3 |
OffsetDataBuilder
Represents the Offset Point Data Builder .
|
OffsetDataBuilder.OffsetDirectionMethod
the Offset Type
|
Operation
Represents an operation
To create or edit an instance of this class, use OperationBuilder Created in NX4.0.0 |
OperationBuilder
Represents a Opr Builder
This is an abstract class, and cannot be instantiated. |
OperationBuilder.HoleAxisTypes
Available types for Hole Axis Type in feature milling and hole making
|
OperationBuilder.HoleDepthTypes
Available types for Hole Depth Type in feature milling and hole making
|
OperationBuilder.OptimizationBasedOnTypes
Available types for optimization based on in operation
|
OperationBuilder.OptimizationDistanceTypes
Available types for optimization distance method in operation
|
OperationBuilder.OptimizationLevelTypes
Available types for optimization level in operation
|
OperationCollection
Represents the operation collection
To obtain an instance of this class, refer to CAMSetup Created in NX4.0.0 |
OperationCollection.UseDefaultName
Whether use the default name in creation
|
OperationDisplayOptionsBuilder
Represents a display options Builder
This is an abstract class and cannot be instantiated. |
OperationDisplayOptionsBuilder.PathDisplayTypes
the path display types .
|
OperationDisplayOptionsBuilder.PathNormalTypes
the path normal types .
|
OperationDisplayOptionsBuilder.PatternDisplayTypes
the pattern display types .
|
OperationDisplayOptionsBuilder.ToolDisplayTypes
the tool display types .
|
OperationSetTeaching
Represents a OperationSetTeaching Builder
To create a new instance of this class, use CAMSetup.createOperationSetTeaching(nxopen.cam.CAMObject) Created in NX10.0.2 NX_REMOVE_FROM_JAVA_API |
OperationTeaching
Represents a OperationTeaching Builder
To create a new instance of this class, use CAMSetup.createOperationTeaching(nxopen.cam.CAMObject) Created in NX8.0.0 |
OperationTransformBuilder
OperationTransformBuilder
To create a new instance of this class, use CAMSetup.createOperationTransformBuilder(nxopen.cam.CAMObject[]) Created in NX6.0.0 |
OperationTransformBuilder.Angle
Angle Type
|
OperationTransformBuilder.Line
Line Type
|
OperationTransformBuilder.Motion
Motion Type
|
OperationTransformBuilder.Result
Transform Option
|
OperationTransformBuilder.Transform
Transform Type
|
OppositeDirection
Represents OppositeDirection .
|
OptimizeFeatureGeometry
Represents an optimize feature geometry builder
This is an abstract class and cannot be instantiated. |
OptimizeTraverseGroupBuilder
Represents a OptimizeTraverseGroup Builder
To create a new instance of this class, use NCGroupCollection.createOptimizeTraverseGroupBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
OrientGeomBuilder
Represents a OrientGeom Builder
This is an abstract class, and cannot be instantiated. |
OrientGeomBuilder.CsysPurposeModes
The CSYS purpose mode options .
|
OrientGeomBuilder.SpecialOutputModes
The special output mode options .
|
OrientGeomBuilder.ToolAxisModes
the tool axis mode options
|
OutputUncutRegions |
ParamBuilder
Represents a manufacturing object builder.
|
ParamBuilder.OptimizationTypes
Available types for Optimization Method in operation
|
ParamValueIntent
The source of values for design logic enum component within status components .
|
PartAxisBuilder
Represents a part axis builder.
|
PartAxisBuilder.PartAxisOfRotationTypes
The types for part axis of rotation
|
Path
Represets a Cam Tool Path
This is a Subobject and cannot be publicly instantiated. |
Path.IsToolpathEventAMotionData
This class holds the data returned from
Path.isToolpathEventAMotion(int) |
Path.IsToolpathEventUdeData
This class holds the data returned from
Path.isToolpathEventUde(nxopen.cam.PathEvent) |
PathCircularMotion
This class represents the data of a Linear Motion .
|
PathContactMotion
This class represents the data of a Linear Motion .
|
PathDisplay
Represents a class that is used for NX testing.
|
PathDisplay.ColorByType
Choices for coloring the tool path motions
|
PathDisplayColors
Represents a path display colors Builder
This is an abstract class and cannot be instantiated. |
PathEvent
Represets a Cam Tool Path Event
This is a Subobject and cannot be publicly instantiated. |
PathHelixMotion
This class represents the data of a Linear Motion .
|
PathLaserDepositionData
Definition for Laser deposition data .
|
PathLaserGeometryData
Definition for Laser geometry data .
|
PathLaserMachineData
Definition for Laser machine data .
|
PathLaserOptimizationData
Definition for Laser optimization data .
|
PathLaserPowderData
Definition for Laser powder data .
|
PathLaserProcessorData
Definition for Laser processor data .
|
PathLevelMarker
This class represents the data of a Linear Motion .
|
PathLinearMotion
This class represents the data of a Linear Motion .
|
PathLinearMotion.FeedrateData
This class holds the data returned from
PathLinearMotion.getFeedrate() |
PatternTypeBuilder
Represents a Guided Curve pattern type builder
This is an abstract class and cannot be instantiated. |
PatternTypeBuilder.Option
Enum of pattern type
|
PitchSetting |
PitchSetting.OptionTypes
the pitch option types
|
PitchSetting.OutputUnitTypes
the output unit types
|
PitchSetting.VarianceTypes
the pitch variance types
|
PlanarMilling
Represents a Planar Milling Operation
To create or edit an instance of this class, use PlanarMillingBuilder Created in NX7.5.0 |
PlanarMillingBuilder
Represents a PlanarMilling Builder
To create a new instance of this class, use OperationCollection.createPlanarMillingBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
PlanarOperation
Represents a Planar operation
To create or edit an instance of this class, use PlanarOperationBuilder Created in NX7.5.0 |
PlanarOperationBuilder
Represents a PlanarOperation Builder
This is an abstract class and cannot be instantiated. |
PlanarOperationBuilder.AutomaticPartBoundaryMethodTypes
Available types for automatic part boundary method in planar mill operation
|
PlungeMillingBuilder
Represents a PlungeMilling Builder
To create a new instance of this class, use OperationCollection.createPlungeMillingBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
PlungeMillingBuilder.TransferMethodTypes
Available types for transfer method type in planar mill operation
|
PmopToolAxisCiBuilder.ToolAxisTypes
Available types for pmop tool axis type
|
PointToPointBuilder
Represents a Point to Point Builder (Drilling)
To create a new instance of this class, use OperationCollection.createPointToPointBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
PostEventsCiBuilder
Represents a PostEventsCiBuilder .
|
Preferences
Represents a cam preferences Builder
To create a new instance of this class, use CAMSession.createCamPreferences() Created in NX7.5.0 |
Preferences.AnimationAccuracyTypes
the animation accuracy types
|
Preferences.AuxiliaryFloorColorSelectionTypes
Deprecated.
Deprecated in NX8.0.0. Use SelectionTypes instead.
|
Preferences.BlankSelectionTypes
Deprecated.
Deprecated in NX8.0.0. Use SelectionTypes instead.
|
Preferences.CheckSelectionTypes
Deprecated.
Deprecated in NX8.0.0. Use SelectionTypes instead.
|
Preferences.CsysInformationListingTypes
the information listing types
|
Preferences.CutAreaSelectionTypes
Deprecated.
Deprecated in NX8.0.0. Use SelectionTypes instead.
|
Preferences.GeometryTypes
the geometry types
|
Preferences.IpwDmrColoringTypes
the IPW material removal coloring types
|
Preferences.IpwToleranceModeTypes
the IPW tolerance modes
|
Preferences.PartSelectionTypes
Deprecated.
Deprecated in NX8.0.0. Use SelectionTypes instead.
|
Preferences.SelectionTypes
the selection types
|
Preferences.WallSelectionTypes
Deprecated.
Deprecated in NX8.0.0. Use SelectionTypes instead.
|
PreprocessGeometryBuilder
Represents a Preprocess Geometry Builder
To create a new instance of this class, use CAMSetup.createPreprocessGeometryBuilder() Created in NX6.0.0 |
PreprocessGeometryBuilder.ObjectsData
This class holds the data returned from
PreprocessGeometryBuilder.getObjects() |
PreprocessGeometryBuilder.ParameterData
This class holds the data returned from
PreprocessGeometryBuilder.getParameter(nxopen.NXObject) |
ProbeCalibrateLengthMoveBuilder
Represents the Probe Calibrate Length Move Builder
To create a new instance of this class, use MoveCollection.createProbeCalibrateLengthMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
ProbeCalibrateSphereMoveBuilder
Represents the Probe Calibrate Sphere Move Builder
To create a new instance of this class, use MoveCollection.createProbeCalibrateSphereMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
ProbeCalibrateSphereMoveBuilder.Geometry
the geometry types
|
ProbeCalibrateStylusMoveBuilder
Represents the Probe Calibrate Stylus Move Builder
To create a new instance of this class, use MoveCollection.createProbeCalibrateStylusMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
ProbeCalibrateStylusMoveBuilder.CalibrateStylusType
the stylus calibration types
|
ProbeCalibrateStylusMoveBuilder.Depth
the depth types
|
ProbeCalibrateStylusMoveBuilder.Geometry
the geometry types
|
ProbeClearanceMoveBuilder
Represents the Probe Clearance Move Builder
To create a new instance of this class, use MoveCollection.createProbeClearanceMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
ProbeControlParametersBuilder |
ProbeControlParametersBuilder.AdjustmentTypes
the output adjustment method types
|
ProbeControlParametersBuilder.PrintType
the print type flag
|
ProbeInspectBorebossMoveBuilder
Represents the Probe Inspect Bore Boss Move Builder
To create a new instance of this class, use MoveCollection.createProbeInspectBorebossMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
ProbeInspectBorebossMoveBuilder.Angle
the angle type
|
ProbeInspectBorebossMoveBuilder.Cycle
the cycle type
|
ProbeInspectBorebossMoveBuilder.Depth
the depth type
|
ProbeInspectBorebossMoveBuilder.Geometry
the geometry type
|
ProbeInspectPointMoveBuilder
Represents the Probe Inspect Point Move Builder
To create a new instance of this class, use MoveCollection.createProbeInspectPointMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
ProbeInspectPointMoveBuilder.Direction
the probing direction type
|
ProbeInspectSurfacePointMoveBuilder
Represents the Probe Inspect Surface Point Move Builder
To create a new instance of this class, use MoveCollection.createProbeInspectSurfacePointMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
ProbeInspectSurfacePointMoveBuilder.Direction
the probing direction type
|
ProbeInspectSurfacePointMoveBuilder.Measurement
the measurement type
|
ProbeInspectSurfacePointMoveBuilder.ToolAxis
the probing tool axis type
|
ProbeOutputControl |
ProbeOutputControl.OutputType
the output method types
|
ProbeParamsBuilder
Represents the Probe Params Builder
This builder cannot be instantiated separately. |
ProbeProtectedParametersBuilder
Represents the Probe Protected Parameters Builder .
|
ProbeProtectedParametersBuilder.AppMethodTypes
the approach types
|
ProbeProtectedParametersBuilder.CollisionFlagTypes
the collision flag types
|
ProbeProtectedParametersBuilder.DepMethodTypes
the departure types
|
ProbeStockParametersBuilder
Represents the Probe Stock Parameters Builder .
|
ProbeToleranceParametersBuilder |
ProbeToolBuilder
Represents a Probe Tool Builder
To create a new instance of this class, use NCGroupCollection.createProbeToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
ProbeTrackingBuilder
Represents a ProbeTracking Builder
To create a new instance of this class, use Tool.createProbeTrackingBuilder(nxopen.cam.ProbeTrackPoint) Created in NX5.0.0 |
ProbeTrackPoint
Represents an Track Point
To obtain an instance of this class us TrackPointCollection Created in NX4.0.0 |
ProfileStrategy
Represents profile strategy .
|
ProfileStrategy.Types
the profile strategy options .
|
ProgramOrderGroupBuilder
Represents a ProgramOrderGroup Builder
To create a new instance of this class, use NCGroupCollection.createProgramOrderGroupBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
ProjVecCiBuilder
Represents a tool axis ci Builder .
|
ProjVecCiBuilder.DpmProjTypes
Available types for Project Vector
|
RadialGrooveMillingBuilder
Represents a RadialGrooveMilling Builder
To create a new instance of this class, use OperationCollection.createRadialGrooveMillingBuilder(nxopen.cam.CAMObject) Created in NX9.0.3 |
RampingMode
Represents a ramping mode Builder .
|
RampingMode.Types
the ramping mode options .
|
ReliefCut
Represents the relief cut .
|
ReliefCut.DepthUnits
the relief cut depth unit options .
|
ReliefCut.DistanceUnits
the relief cut distance unit options .
|
ReliefCut.Modes
the relief cut options .
|
ReliefPlunge |
ReliefPlunge.Types
the relief plunge options .
|
ReliefPlunge.UnitTypes
the relief plunge options .
|
RobotCartesianMove
represents the Rotary Move To Point Builder
To create a new instance of this class, use MoveCollection.createRobotCartesianMove(nxopen.cam.Move) Created in NX11.0.1 NX_REMOVE_FROM_JAVA_API |
RobotMountMove
represents the Rotary Move To Point Builder
To create a new instance of this class, use MoveCollection.createRobotMountMove(nxopen.cam.Move) Created in NX11.0.1 NX_REMOVE_FROM_JAVA_API |
RobotMountMove.Types
the mount Type enum .
|
RobotPoseMove
represents the Rotary Move To Point Builder
To create a new instance of this class, use MoveCollection.createRobotPoseMove(nxopen.cam.Move) Created in NX11.0.1 NX_REMOVE_FROM_JAVA_API |
RotaryFinishGeomBuilder
Represents a rotary finish geometry builder.
|
RotaryFinishGeomBuilder.PartAxisOfRotationTypes
Available types for Part Axis of Rotation
|
RotaryPointMoveBuilder
represents the Rotary Move To Point Builder
To create a new instance of this class, use MoveCollection.createRotaryPointMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
RotaryPolarMoveBuilder
Represents the Rotary Polar Builder
To create a new instance of this class, use MoveCollection.createRotaryPolarMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
RotaryPolarMoveBuilder.LockAxisDirection
the lock axis type
|
RotaryPolarMoveBuilder.LockPlaneType
the lock plane type
|
RotateToolMoveBuilder
Represents the Rotate Tool Move Builder
To create a new instance of this class, use MoveCollection.createRotateToolMoveBuilder(nxopen.cam.Move, nxopen.cam.Move) Created in NX5.0.0 |
RoughFinishTurning
Represents a Turn Rough Finish operation
To create or edit an instance of this class, use RoughFinishTurningBuilder Created in NX7.5.0 |
RoughFinishTurningBuilder
Represents a RoughFinishTurning Builder
This is an abstract class and cannot be instantiated. |
RoughFinishTurningBuilder.CustomMemberDataTypes
the Custom Member Data types .
|
RoughFinishTurningBuilder.CutRegionsTypes
the Cut regions types .
|
RoughFinishTurningBuilder.ExtendModeTypes
the Extend Mode types .
|
RoughFinishTurningBuilder.MaximumAreaModes
the Maximum Area modes .
|
RoughFinishTurningBuilder.MinimumAreaTypes
the Mininmum Area types .
|
RoughFinishTurningBuilder.MinmaxAreaUnits
the Minimum/Maximum Area units .
|
RoughFinishTurningBuilder.MinmaxSizeModes
the Maximum/Maximum Size modes .
|
RoughFinishTurningBuilder.MinmaxSizeUnits
the Minimum/Maximum Size Axial/Radial units .
|
RoughFinishTurningBuilder.MultiChannelTurningModeTypes
the multi-channel turning mode types .
|
RoughFinishTurningBuilder.RegionMachiningTypes
the Region Machining types .
|
RoughFinishTurningBuilder.RegionSelectionTypes
the Region Selection types
|
RoughFinishTurningBuilder.ToleranceOffsetTypes
the Tolerance Offset types
|
RoughTurningBuilder
Represents a RoughTurning Builder
To create a new instance of this class, use OperationCollection.createRoughTurningBuilder(nxopen.cam.CAMObject) Created in NX6.0.0 |
RoughTurningBuilder.CleanupTypes
the Cleanup types .
|
RoughTurningBuilder.LevelDepthModeTypes
the Level Depth Mode types .
|
RoughTurningBuilder.PartOffDepthModeTypes
the Part Off Depth Mode types .
|
RoughTurningBuilder.PartOffPositionModeTypes
the Part Off Position Mode types .
|
RoughTurningBuilder.ReversalModeTypes
the Reversal Mode types .
|
RoundPointBuilder
Represents the round Point Builder .
|
RoundPointBuilder.Output
the decimal places
|
SelectCAMFeature
Represents a single object selection.
|
SelectCAMFeature.ValueData
This class holds the data returned from
SelectCAMFeature.getValue() |
SelectCAMFeature.ValueWithCaeSetObjectInfoData
This class holds the data returned from
SelectCAMFeature.getValue() |
SelectCAMFeature.ValueWithSnapData
This class holds the data returned from
SelectCAMFeature.getValue() |
SelectCAMFeatureList
Represents a list of objects on a selection list.
|
Sequence
Represents Sequence Builder .
|
Sequence.Types
Available types for Sequencing .
|
SimulationOptionsBuilder.Accuracy
The ipw animation accuracy options
|
SimulationOptionsBuilder.DialogType
the dialog type
|
SimulationOptionsBuilder.Enable
the enable value
|
SimulationOptionsBuilder.IpwEnable
the ipw mode value
|
SimulationOptionsBuilder.Resolution
The ipw resolution options
|
SimulationOptionsBuilder.SimulationDisplayMode
The modes of the simulation display
|
SimulationOptionsBuilder.Stationary
The stationary options
|
SimulationOptionsBuilder.StockType
Gouge Check Stock options
|
SimulationOptionsBuilder.ToolShapeColl
The tool shape for checking options
|
SimulationOptionsBuilder.ToolShapeMR
The tool shape for material removal options
|
SmallAreaAvoidance
Represents a SmallArea Builder .
|
SmallAreaAvoidance.StatusTypes
available types for Small Area Status
|
SoftTool
Represents a SoftTool
This is an abstract class, and cannot be instantiated. |
SolidToolBuilder
Represents a SolidTool Builder
This is an abstract class, and cannot be instantiated. |
SolidTrackingBuilder
Represents a SolidTracking Builder
To create a new instance of this class, use Tool.createSolidTrackingBuilder(nxopen.cam.SolidTrackPoint) Created in NX5.0.0 |
SolidTrackPoint
Represents an Track Point
To obtain an instance of this class us TrackPointCollection Created in NX4.0.0 |
SplitSubopCommand
Represents an Split Subop Command Builder
This cannot be instantiated . |
SplitSubopCommand.LinePlaneTypes
Available line plane types
|
SplitSubopCommand.Types
Available split types
|
Splitter
Represents a Splitter Builder
To create a new instance of this class, use MultiBladeSplittersGeometry.createSplitter(nxopen.NXObject[], nxopen.NXObject[]) Created in NX7.0.0 |
SplitterList
Represents a list of objects.
|
SpringPasses
Represents a spring passes .
|
SpringPasses.Types
the alternate spring passes options .
|
SpunOutlineGeom
Represents a spun outline geometry object for turning boundary .
|
SpunOutlineGeom.CreationTypes
the creation methods
|
SpunOutlineGeom.PlanesAtAnglesData
This class holds the data returned from
SpunOutlineGeom.getPlanesAtAngles() |
SpunOutlineGeom.PlanesThroughPointsData
This class holds the data returned from
SpunOutlineGeom.getPlanesThroughPoints() |
SteepContainment |
SteepContainment.Types
Available types for steep containment
|
StepoverBuilder
Represents a Stepover Builder .
|
StepoverBuilder.ApplyTypes
apply on part options .
|
StepoverBuilder.StepoverTypes
stepover options .
|
StepParamsBuilder
Represents a StepParams Builder .
|
StepParamsBuilder.Data
This class holds the data returned from
StepParamsBuilder.get(int) |
StepUpBuilder
Represents a StepUp Builder .
|
StockPerPassBuilder
Represents a Builder which holds the data for a set of individual stock per pass.
|
StopPosition
Represents a stop position .
|
StopPosition.Types
the stop at options .
|
SurfaceContourBuilder
Represents a SurfaceContour Builder
To create a new instance of this class, use OperationCollection.createSurfaceContourBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
SurfaceContourBuilder.AccessVectorMethodType
Available types for access vector for the contour profile method of surface milling
|
SurfaceContourBuilder.CleanupTypes
Available types for cleanup
|
SurfaceContourBuilder.CutDirectionTypes
The types of the cut direction
|
SurfaceContourBuilder.DriveMethodTypes
Available types for Drive Method
|
SurfaceDriveGeometry
Represents a CAM drive geometry object for surface area .
|
SurfaceDriveGeometrySet
Represents a geometry set for a CAM object.
|
SurfaceDriveGeometrySetList
Represents a list of objects.
|
SurfaceRegions
Represents a Surface Regions Builder
To create a new instance of this class, use CAMSetup.createSurfaceRegions(nxopen.features.Feature) Created in NX8.0.0 |
SurfaceRegions.CreateRegionsTypes
enum for create regions
|
SurfaceRegions.FeatureTypes
enum for feature type
|
TabPointDataBuilder
Represents a Tab Point Builder
To create a new instance of this class, use WedmCustomBoundaryDataBuilder.createTabPointDataBuilder() Created in NX5.0.0 |
TabPointDataBuilder.TabMethodType
Tab Point Method Options
|
TabPointDataBuilder.TabThreadMethodType
Tab Thread Point Options
|
TabPointDataBuilderList
Represents a list of objects.
|
Teaching
Represents a Teaching Builder
Abstract . |
TeachmodeEngageSettingsBuilder
Represents a TeachmodeEngageSettingsBuilder
To create a new instance of this class, use OperationCollection.createTeachmodeTurningBuilder(nxopen.cam.CAMObject) Created in NX7.5.0 |
TeachmodeLinearMoveBuilder
Represents a TeachmodeLinearMove
To create a new instance of this class, use OperationCollection.createTeachmodeTurningBuilder(nxopen.cam.CAMObject) Created in NX7.5.0 |
TeachmodeLinearMoveBuilder.CurveToolPositionTypes
the types for positioning to curves
|
TeachmodeLinearMoveBuilder.EndPositionTypes
the end position definition types
|
TeachmodeLinearMoveBuilder.InitialRetractTypes
the initial retract choices
|
TeachmodeLinearMoveBuilder.MoveTypes
the movement types
|
TeachmodeProfileMoveBuilder
Represents a TeachmodeProfileMoveBuilder
To create a new instance of this class, use OperationCollection.createTeachmodeTurningBuilder(nxopen.cam.CAMObject) Created in NX7.5.0 |
TeachmodeProfileMoveBuilder.DriveGeometryTypes
the drive geometry types
|
TeachmodeProfileMoveBuilder.StartStopPositionMethods
the start and stop positioning methods
|
TeachmodeRetractSettingsBuilder
Represents a TeachmodeRetractSettings builder
To create a new instance of this class, use OperationCollection.createTeachmodeTurningBuilder(nxopen.cam.CAMObject) Created in NX7.5.0 |
TeachmodeTurningBuilder
Represents a TeachmodeTurningBuilder
To create a new instance of this class, use OperationCollection.createTeachmodeTurningBuilder(nxopen.cam.CAMObject) Created in NX7.5.0 |
ThreadCutParameters |
ThreadedBossSet
Represents a thread boss Geometry builder
To create a new instance of this class, use HoleBossGeom.createThreadedBossBuilder(nxopen.NXObject[], double, double, nxopen.NXObject, double, double, double, java.lang.String, double, int, nxopen.cam.HoleBossGeom.FormTypes, java.lang.String) Created in NX7.5.0 |
ThreadedBossSetList
Represents a list of objects.
|
ThreadedHoleSet
Represents a Cut Area Geometry builder
To create a new instance of this class, use HoleBossGeom.createThreadedHoleBuilder(nxopen.NXObject[], double, double, nxopen.NXObject, double, double, double, java.lang.String, java.lang.String, double, int, nxopen.cam.HoleBossGeom.FormTypes, java.lang.String, java.lang.String, int) Created in NX7.5.0 |
ThreadedHoleSetList
Represents a list of objects.
|
ThreadMillingBuilder
Represents a ThreadMilling Builder
To create a new instance of this class, use OperationCollection.createThreadMillingBuilder(nxopen.cam.CAMObject) Created in NX7.5.0 |
ThreadMillingCutParameters
Represents a ThreadMillingCutParameters Builder .
|
ThreadMillingCutParameters.CutDirectionTypes
cut direction options .
|
ThreadToolBuilder
Represents a Thread tool builder
To create a new instance of this class, use NCGroupCollection.createThreadToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
ThreadToolBuilder.InsertShapes
the available insert shapes
|
ThreadTurningBuilder
Represents a ThreadTurning Builder
To create a new instance of this class, use OperationCollection.createThreadTurningBuilder(nxopen.cam.CAMObject) Created in NX6.0.0 |
ThreadTurningBuilder.DepthOptionTypes
the Depth Option types
|
ThreadTurningBuilder.InfeedLengthTypes
the Infeed Length Types
|
ThreadTurningBuilder.InfeedModes
the Infeed modes
|
Tool |
Tool.Subtypes
Tool subtypes
|
Tool.TypeAndSubtypeData
This class holds the data returned from
Tool.getTypeAndSubtype() |
Tool.Types
Tool types
|
ToolAxisAdvanced
Represents a Tool Axis Advanced Builder .
|
ToolAxisAdvanced.RotateAboutType
Rotate About type
|
ToolAxisAdvanced.Type
Available types for Tool Axis Advanced type
|
ToolAxisBase
Represents a tool axis ci Builder .
|
ToolAxisChange |
ToolAxisChange.MethodTypes
Available types for tool axis change method
|
ToolAxisCiBuilder
Represents a tool axis ci Builder .
|
ToolAxisFixed
Represents a Tool Axis Fixed Builder .
|
ToolAxisFixed.Types
Available types for Tool Axis Fixed
|
ToolAxisInterpolate
Represents a Tool Axis Interpolate Builder .
|
ToolAxisInterpolate.ControlDirectionTypes
the available types for the control direction
|
ToolAxisInterpolate.InterpolateTypes
the available types for Interpolate Types
|
ToolAxisInterpolate.InterpolationMethodTypes
the available types for interpolate method
|
ToolAxisInterpolate.TurnInputModeTypes
the available types for turn input mode
|
ToolAxisInterpolate.TurnInterpolationMethodTypes
the available types for turn interpolation method
|
ToolAxisTilt
Represents a builder for an inheritable double value in of a CAM.CAMObject
Created in NX6.0.0 |
ToolAxisTilt.TiltAngleTypes
Available types for auto tilt
|
ToolAxisTilt.Types
Available types for tool axis tilt control
|
ToolAxisVariable
Represents a Tool Axis Variable Builder .
|
ToolAxisVariable.MaximumLeadAngleTypes
Available types for Maximum Lead Angle
|
ToolAxisVariable.NominalLeadAngleTypes
Available types for Nominal Lead Angle
|
ToolAxisVariable.RulingTypes
Available types for Ruling
|
ToolAxisVariable.Types
Available types for Tool Axis Variable
|
ToolBuilder
Represents a Tool Builder
This is an abstract class, and cannot be instantiated. |
ToolBuilder.MaterialData
This class holds the data returned from
ToolBuilder.getMaterialData() |
ToolChangeCiBuilder
Represents a ToolChangeCiBuilder .
|
ToolChangeCiBuilder.HeadDesignationTypes
Available types for head designation type
|
ToolChangePositionBuilder
represents the Rotary Move To Point Builder
To create a new instance of this class, use MoveCollection.createToolChangePositionBuilder(nxopen.cam.Move) Created in NX11.0.2 NX_REMOVE_FROM_JAVA_API |
ToolPathDivideBuilder
Represents a Tool Path Divide Builder
To create a new instance of this class, use CAMSetup.createToolPathDivideBuilder(nxopen.cam.CAMObject[]) Created in NX5.0.0 |
ToolPathDivideBuilder.PathDivideType
Divide type options
|
ToolPathEditorBuilder
Represents a Tool Path Editor Builder
To create a new instance of this class, use Operation.createToolPathEditorBuilder() Default values. |
ToolPathEditorBuilder.ClearanceMethodType
Clearance Method Type
|
ToolPathEditorBuilder.ConnectionMethodType
Connection Method Type
|
ToolPathEditorBuilder.ExtendMethodType
Extend Method Type
|
ToolPathEditorBuilder.MotionMethodType
Motion Method Type
|
ToolPathEditorBuilder.TrimGeometryType
Trim Geometry Type
|
ToolPathEditorBuilder.TrimMethod
Trim Method
|
ToolPathEditorBuilder.TrimPathType
Trim Path Type
|
ToolPathEditorBuilder.TrimSideType
Trim Side Type
|
ToolpathEventType
Types of tool path events
|
ToolPathSplitBuilder
Represents a Tool Path Split Builder
To create a new instance of this class, use CAMSetup.createToolPathSplitBuilder(nxopen.cam.CAMObject[]) Created in NX6.0.0 |
ToolPathSplitBuilder.SplitTypes
Divide type options
|
ToolPathSplitBuilder.TransferTypes
Transfer type options
|
ToolPathSplitBuilder.TransferUsingMethods
Transfer using options
|
ToolPathSplitItemBuilder
Represents a ToolPathSplitItem builder
Use the ToolPathSplitBuilder class to create a ToolPathSplitItemBuilder object. |
ToolPathSplitItemBuilderList
Represents a list of objects.
|
ToolPathSplitParametersBuilder
Represents the Divide Parameters
This object is owned by another builder. |
ToolPathSplitParametersBuilder.SplitTypes
Divide type options
|
ToolPathSplitParametersBuilder.TransferTypes
Transfer type options
|
ToolPathSplitParametersBuilder.TransferUsingMethods
Transfer using options
|
ToolPathTiltAvoidance
Represents a Tool Path Tilt Avoidance Builder
This is a sub-builder class and cannot be directly instantiated . |
ToolPathTiltAvoidance.AxisType
the tilting axis type
|
ToolPathTiltAvoidance.MethodType
the collision avoidance method type
|
ToolPathTiltBuilder
Represents a Tool Path Tilt Builder
To create a new instance of this class, use CAMSetup.createToolPathTiltBuilder(nxopen.cam.CAMObject[]) Created in NX7.5.2 |
ToolPathTiltClearance
Represents a Tool Path Tilt Clearance Builder
This is a sub-builder class and cannot be directly instantiated . |
ToolPathTiltMachine
Represents a Tool Path Tilt Machine Builder
This is a sub-builder class and cannot be directly instantiated . |
ToolPathTiltMachine.ToolMainMcsTypes
the main tool rotation MCS options
|
ToolPathTiltTilting
Represents a Tool Path Tilt Tilting Builder
This is a sub-builder class and cannot be directly instantiated . |
ToolPathTiltTilting.AxisType
the tilting axis type
|
ToolPathTiltTilting.ManualTiltTypes
the manual tilt
|
ToolPathTiltTilting.ReferenceTypes
the tilting reference type
|
ToolPathTiltTilting.ToolAxisTiltingDistTypes
the tool distance type options
|
ToolPathTiltTilting.ToolAxisTiltingRuleTypes
the tool tilting rule options
|
ToolPathTiltTilting.ToolAxisTypes
the tool axis mode options
|
ToolPositioningBuilder
Represents the Tool Positioning Builder .
|
ToolPositioningBuilder.ToolPositioning
the tool positioning options
|
ToolTrackingPointBuilder
Represents the Tool Tracking Point Builder
To create a new instance of this class, use MoveCollection.createToolTrackingPointBuilder(nxopen.cam.Move) Created in NX8.5.1 |
Topology
Represents a CAM topology builder
Use the Geometry class to get a topology builder Created in NX8.0.0 |
TrackingBuilder
Represents a Tracking Builder .
|
TrackingBuilder.Data
This class holds the data returned from
TrackingBuilder.get(nxopen.NXObject) |
TrackPoint
Represents an Track Point
To obtain an instance of this class us TrackPointCollection Created in NX4.0.0 |
TrackpointBuilder
Represents a Trackpoint Builder
This is an abstract class and can not be instantiated . |
TrackPointCollection
Represents the track point collection
To obtain an instance of this class, refer to Tool Created in NX5.0.0 |
TrimPlane
Represents Trim Plane .
|
TrimPlane.Content
The content options .
|
TrimPlane.LimitOptions
The limit options .
|
TrimPoint
Represents trim point .
|
TrimPoint.AngleOptions
The trim point angle options .
|
TrimPoint.Options
The trim point options .
|
TrimPoint.RampAngleOptions
The trim point ramp angle options .
|
TrochoidalSettings |
TToolBuilder
Represents a T Tool Builder
To create a new instance of this class, use NCGroupCollection.createTToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
TurnAvoidanceApproachBuilder
Represents an avoidance start of engage Builder .
|
TurnAvoidanceApproachBuilder.ApproachPathModes
The approach path mode options .
|
TurnAvoidanceClearanceBuilder
Represents an avoidance start of engage Builder .
|
TurnAvoidanceClearanceBuilder.AxialPlaneModes
The axial plane mode options .
|
TurnAvoidanceClearanceBuilder.RadialPlaneModes
The radial plane mode options .
|
TurnAvoidanceDepartureBuilder
Represents an avoidance start of engage Builder .
|
TurnAvoidanceDepartureBuilder.DeparturePathModes
The departure path mode options .
|
TurnAvoidanceFromBuilder
Represents an avoidance from Builder .
|
TurnAvoidanceFromBuilder.FromPointModes
The from point mode options .
|
TurnAvoidanceGeomBuilder
Represents a TurnAvoidanceGeom Builder
To create a new instance of this class, use NCGroupCollection.createTurnAvoidanceGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
TurnAvoidanceGohomeBuilder
Represents an avoidance return Builder .
|
TurnAvoidanceGohomeBuilder.GohomePointModes
The gohome point mode options .
|
TurnAvoidanceGohomeBuilder.GohomePointMotionTypes
The gohome point motion type options .
|
TurnAvoidancePathPointsBuilder
Represents a turn avoidance path points builder .
|
TurnAvoidancePathPointsBuilder.CsTypes
the cs modes .
|
TurnAvoidancePathPointsBuilder.CustomFeedrateUnitTypes
the custom feed rate unit options .
|
TurnAvoidancePathPointsBuilder.FeedrateModesTypes
the feed rate type options .
|
TurnAvoidancePathPointsBuilder.MotionTypes
the motion to point type options .
|
TurnAvoidancePathPointsBuilder.PointData
This class holds the data returned from
TurnAvoidancePathPointsBuilder.getPointData(int) |
TurnAvoidancePathPointsBuilder.PointListData
This class holds the data returned from
TurnAvoidancePathPointsBuilder.getPointListData(int) |
TurnAvoidancePathPointsBuilder.PointStatus
the point status options .
|
TurnAvoidanceReturnBuilder
Represents an avoidance return Builder .
|
TurnAvoidanceReturnBuilder.ReturnPointModes
The return point mode options .
|
TurnAvoidanceReturnBuilder.ReturnPointMotionTypes
the return point motion type options .
|
TurnAvoidanceStartBuilder
Represents an avoidance start Builder .
|
TurnAvoidanceStartBuilder.StartPointModes
the start point mode options .
|
TurnAvoidanceStartBuilder.StartPointMotionTypes
The start point motion type options .
|
TurnAvoidanceStartOfEngageBuilder
Represents an avoidance start of engage Builder .
|
TurnAvoidanceStartOfEngageBuilder.StartOfEngageMotionTypes
The start of engage motion type options .
|
TurnBoundaryGeomBuilder
Represents a TurnBoundaryGeom Builder
To create a new instance of this class, use NCGroupCollection.createTurnBoundaryGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
TurnConcaveCornerControl
Represents a concave corner ja .
|
TurnConcaveCornerControl.RadiusOptions
the Concave Corner Control radius options .
|
TurnConcaveCornerControl.Types
the Concave Corner Control types .
|
TurnCornerControl
Represents a first plunge ja .
|
TurnCornerControl.Types
the Corner Control Types options .
|
TurnCutParameters |
TurnCutterClearance |
TurnDirection
Represents a direction .
|
TurnDirection.Types
the direction options .
|
TurnEngageRetractBuilder
Represents a first plunge Builder .
|
TurnEngageRetractBuilder.AutoOptions
The auto engage retract options .
|
TurnEngageRetractBuilder.DirectEngageRetractModes
the direct engage/retact mode options .
|
TurnEngageRetractBuilder.ExtendMethods
the extend method options .
|
TurnEngageRetractBuilder.Types
The engage retract type .
|
TurnFeatureGeomBuilder
Represents a TurnFeatureGeom Builder
To create a new instance of this class, use NCGroupCollection.createTurnFeatureGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
TurnFeatureGeomBuilder.CutRegionSelectionModes
the cut region selection options
|
TurnFeatureGeomBuilder.SurfaceSensitivityModes
the surface sensitivity options .
|
TurnFeatureGeomBuilder.ToleranceOffsetModes
the tolerance_offset options
|
TurnGeomBuilder
Represents a TurnGeom Builder
To create a new instance of this class, use NCGroupCollection.createTurnGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
TurnGrooveCornerControl
Represents a groove corner control ja .
|
TurnGrooveCornerControl.CornerTypes
the Groove Corner Control corner types .
|
TurnGrooveCornerControl.CutSequenceTypes
the Groove Corner Control cut sequence types .
|
TurnGrooveCornerControl.ReliefPlungeTypes
the Groove Corner Control relief plunge types .
|
TurningOperation
Represents a Turning operation
To create or edit an instance of this class, use TurningOperationBuilder Created in NX7.5.0 |
TurningOperationBuilder
Represents a Turning Operation Builder
This is an abstract class and cannot be instantiated. |
TurningOperationBuilder.MotionOutputOptions
The motion output options .
|
TurningOperationBuilder.ReorientToolHolderModeOptions
available options for Reorient Tool Holder Mode
|
TurningOperationBuilder.TrackingPointType
available types for tracking point
|
TurningToolBuilder
Represents a Turning tool builder
This is an abstract class, and cannot be instantiated. |
TurningToolBuilder.HolderShankTypes
the available turn holder shank types
|
TurningToolBuilder.InsertPositions
the available insert positions
|
TurnMethodBuilder
Represents a Turn Method Builder
To create a new instance of this class, use NCGroupCollection.createTurnMethodBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
TurnMoveToPointBuilder
Represents the Move To Point Builder
To create a new instance of this class, use MoveCollection.createTurnMoveToPointBuilder(nxopen.cam.Move) Created in NX8.5.1 |
TurnMoveToPointBuilder.DirectionTypes
the move direction type
|
TurnOrientGeomBuilder
Represents a TurnOrientGeom Builder
To create a new instance of this class, use NCGroupCollection.createTurnOrientGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
TurnOrientGeomBuilder.LatheWorkPlaneTypes
the lathe work plane types
|
TurnOrientWcs
Represents an Turn Orient Wcs Builder
This is an abstract class, and cannot be instantiated. |
TurnOrientWcs.XcMappingTypes
the XC mapping types
|
TurnOrientWcs.YcMappingTypes
the YC mapping types
|
TurnOverlap |
TurnOverlap.Types
the overlap types .
|
TurnPartProbingBuilder
Represents a Turn Part Probing Builder
To create a new instance of this class, use OperationCollection.createTurnPartProbingBuilder(nxopen.cam.CAMObject) Created in NX8.5.1 |
TurnProbeClearanceBuilder
Represents an probe start of engage Builder
To create a new instance of this class, use MoveCollection.createTurnProbeClearanceBuilder(nxopen.cam.Move) Created in NX8.5.1 |
TurnProbeClearanceBuilder.AxialPlaneModes
The axial plane mode options .
|
TurnProbeClearanceBuilder.RadialPlaneModes
The radial plane mode options .
|
TurnProbeInspectPointMoveBuilder
Represents the Turn Probe Inspect Point Move Builder
To create a new instance of this class, use MoveCollection.createTurnProbeInspectPointMoveBuilder(nxopen.cam.Move) Created in NX8.5.1 |
TurnProbeInspectPointMoveBuilder.DirectionTypes
the probing direction type
|
TurnRoughFinishLocalReturnBuilder
Represents an avoidance start Builder .
|
TurnRoughFinishLocalReturnBuilder.AdjustmentModeTypes
the adjustment mode options .
|
TurnRoughFinishLocalReturnBuilder.DwellUnitTypes
the Dwell Unit type .
|
TurnRoughFinishLocalReturnBuilder.LimitTypes
the local limit mode .
|
TurnRoughFinishLocalReturnBuilder.ModeTypes
The local return type options .
|
TurnRoughFinishLocalReturnBuilder.ReturnMoveModeTypes
the return move mode options .
|
TurnRoughFinishTestCut
Represents a test cut builder .
|
TurnRoughFinishTestCut.CutTypes
the test cut type options
|
TurnRoughFinishTestCut.DirectionTypes
the test cut direction options
|
TurnRoughFinishTestCut.FeedInTypes
the test cut feed in options
|
TurnRoughFinishTestCut.FeedOutTypes
the test cut feed out options
|
TurnRoughFinishTestCut.MeasuringPositionTypes
the test cut measuring position options
|
TurnRoughFinishTestCut.ReturnMoveTypes
the test cut return move options
|
TurnRoughFinishTestCut.SecondarySequenceTypes
the secondary test cut sequence options
|
TurnRoughFinishTestCut.SequenceTypes
the test cut sequence options
|
TurnRoughFinishTestCut.StockModeTypes
the test cut stock mode options
|
TurnRoughFinishTestCut.StopPositionTypes
the test cut stop position options
|
TurnRoughVariableIncrementBuilder
Represents a Variable Increment Builder .
|
TurnStock |
TurnThreadEngageRetractBuilder
Represents a Thread Turning Engage or Retract Builder .
|
TurnThreadEngageRetractBuilder.EngageRetractTypes
The engage retract type .
|
TurnThreadEngageRetractBuilder.MoveTypes
The move type .
|
TurnThreadFinishPassesBuilder
Represents a TurnThreadFinishPasses Builder .
|
TurnToolBuilder
Represents a Turn tool builder
To create a new instance of this class, use NCGroupCollection.createTurnToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
TurnToolBuilder.HolderHands
the available turn holder hand options
|
TurnToolBuilder.HolderShankDefinitionModes
the available turn holder shank definition modes
|
TurnToolBuilder.HolderStyles
the available turn holder style options
|
TurnToolBuilder.InsertShapes
the available insert shapes
|
TurnToolBuilder.ReliefAngleTypes
the available relief angle types
|
TurnToolBuilder.SizeOptions
the available size options
|
TurnToolBuilder.ThicknessTypes
the available thickness types
|
TurnToolProbingBuilder
Represents a Turn tool probing Builder
To create a new instance of this class, use OperationCollection.createTurnToolProbingBuilder(nxopen.cam.CAMObject) Created in NX8.5.1 |
TurnToolProbingBuilder.TrackingPointTypes
available types for tracking point
|
Ude
Represets a User Defined Event
To create a new instance of this class, use UdeSet.createUde() Created in NX7.0.0 |
UdeList
Represents a list of objects.
|
UdeMoveBuilder
Represents the Ude Move Builder
To create a new instance of this class, use MoveCollection.createUdeMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
UdeParameter
Represents a User Defined Event Parameter .
|
UdeParameter.ParameterTypes
the parameter Type
|
UdeSet
Represets a set of User Defined Events .
|
UdtSectionBuilder
Represents a UdtSection Builder .
|
UdtSectionBuilder.Data
This class holds the data returned from
UdtSectionBuilder.get(int) |
UpDownCutting |
UserDefinedMoveBuilder
Represents the User Defined Move Builder
To create a new instance of this class, use MoveCollection.createUserDefinedMoveBuilder(nxopen.cam.Move, java.lang.String) Created in NX8.0.0 |
UserDefinedOpr
Represents a User Defined operation
To create or edit an instance of this class, use UserDefinedOprBuilder Created in NX7.5.0 |
UserDefinedOprBuilder
Represents a UserDefinedOpr Builder
This is an abstract class, and cannot be instantiated. |
VazlMillingBuilder
Represents a VazlMilling Builder
To create a new instance of this class, use OperationCollection.createVazlMillingBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
VectorDistanceMoveBuilder
Represents the Vector Distance Move Builder
To create a new instance of this class, use MoveCollection.createVectorDistanceMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
VectorDistanceMoveBuilder.EndType
the choice
|
VerticalPosition
Represents a VerticalPosition Builder .
|
VerticalPosition.OffsetTypes
offset options .
|
VolumeBased25DMillingOperation
Represents a Floor Wall Milling Operation
To create or edit an instance of this class, use VolumeBased25DMillingOperationBuilder Created in NX8.5.0 |
VolumeBased25DMillingOperationBuilder
Represents a VolumeBased25DMillingOperation Builder
To create a new instance of this class, use OperationCollection.createVolumeBased25dMillingOperationBuilder(nxopen.cam.CAMObject) Created in NX8.5.0 |
VolumeBased25DMillingOperationBuilder.CutDepthsType
Available types for cut depths for cut method profile
|
WedmArcOutputTypeCiBuilder
Represents a WedmArcOutputTypeCiBuilder .
|
WedmArcOutputTypeCiBuilder.OutputTypes
Available types for output
|
WedmBasedGeomBuilder
Represents a WedmBasedGeom Builder
To create a new instance of this class, use NCGroupCollection.createWedmBasedGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
WedmCornerControlBuilder
Represents a WedmCornerControl Builder
To create a new instance of this class, use NCGroupCollection.createWedmCornerControlBuilder(nxopen.cam.CAMObject) Created in NX6.0.0 |
WedmCustomBoundaryDataBuilder
Represents a WedmCustomBoundaryData Builder
No Creator . |
WedmCustomBoundaryDataBuilderList
Represents a list of objects.
|
WedmCutOrderBuilder.Type
Cut Order
|
WedmCutParameters |
WedmCutParameters.CutDirectionTypes
the types available for wedm cut direction .
|
WedmCutParameters.WirePositionTypes
the types available for wire position .
|
WedmCuttingBuilder
Represents a WedmCutting Builder
To create a new instance of this class, use NCGroupCollection.createWedmCuttingBuilder(nxopen.cam.CAMObject) Created in NX6.0.0 |
WedmExtGeomBuilder
Represents a WedmExtGeom Builder
To create a new instance of this class, use NCGroupCollection.createWedmExtGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
WedmFeatureGeomBuilder
Represents a WedmFeatureGeom Builder
To create a new instance of this class, use NCGroupCollection.createWedmFeatureGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
WedmGeomBuilder
Represents a WedmGeom Builder
To create a new instance of this class, use NCGroupCollection.createWedmGeomBuilder(nxopen.cam.CAMObject) Created in NX7.5.0 |
WedmGeomBuilder.BackburnPassesTypes
the types available for wedm backburn passes .
|
WedmGeomBuilder.ConvexCornerTypes
the types available for convex corner control .
|
WedmGeomBuilder.CornerSmoothingType
the types available for corner smoothing .
|
WedmGeomBuilder.SmoothLeadInTypes
the types available for smooth_lead_in .
|
WedmGeomBuilder.SmoothLeadOutTypes
the types available for smooth_lead_out_types .
|
WedmGeomBuilder.StopPointFlagTypes
the types available for wedm stop point .
|
WedmGeomBuilder.StopPointTypes
the types available for wedm stop point .
|
WedmIntGeomBuilder
Represents a WedmIntGeom Builder
To create a new instance of this class, use NCGroupCollection.createWedmIntGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
WedmLeadInOutBuilder
Represents a WedmLeadInOut Builder
To create a new instance of this class, use NCGroupCollection.createWedmLeadInOutBuilder(nxopen.cam.CAMObject) Created in NX6.0.0 |
WedmMachineControlBuilder
Represents a WedmMachineControl Builder
To create a new instance of this class, use OperationCollection.createWedmMachineControlBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
WedmMethodBuilder
Represents a Wedm Method Builder
To create a new instance of this class, use NCGroupCollection.createWedmMethodBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
WedmMoveControlBuilder
Represents a WedmMoveControl Builder
To create a new instance of this class, use NCGroupCollection.createWedmMoveControlBuilder(nxopen.cam.CAMObject) Created in NX6.0.0 |
WedmNocoreGeomBuilder
Represents a WedmNocoreGeom Builder
To create a new instance of this class, use NCGroupCollection.createWedmNocoreGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
WedmOpenGeomBuilder
Represents a WedmOpenGeom Builder
To create a new instance of this class, use NCGroupCollection.createWedmOpenGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
WedmOperationBuilder
Represents a WedmOperation Builder
To create a new instance of this class, use OperationCollection.createWedmOperationBuilder(nxopen.cam.CAMObject) Created in NX7.5.0 |
WedmOperationBuilder.BackburnPassesTypes
the types available for wedm backburn passes .
|
WedmOperationBuilder.ConvexCornerTypes
the types available for convex corner control .
|
WedmOperationBuilder.CornerSmoothingType
the types available for corner smoothing .
|
WedmOperationBuilder.InPathUdeSetTypes
Represents the in path ude set type .
|
WedmOperationBuilder.SmoothLeadInTypes
the types available for smooth_lead_in .
|
WedmOperationBuilder.SmoothLeadOutTypes
the types available for smooth_lead_out_types .
|
WedmOperationBuilder.StopPointFlagTypes
the types available for wedm stop point .
|
WedmOperationBuilder.StopPointTypes
the types available for wedm stop point .
|
WedmOrientGeomBuilder
Represents a WedmOrientGeom Builder
To create a new instance of this class, use NCGroupCollection.createWedmOrientGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
WedmPointDefinitionBuilder
Represents a
WedmPointDefinitionBuilder
This builder cannot be instantiated separately. |
WedmPointDefinitionBuilder.PointStates
the types available for wedm point definition
|
WedmPointDefinitionBuilder.WireAxisStates
the types available for wire axis definition
|
WedmStatusControlCiBuilder
Represents a WedmStatusControlCiBuilder .
|
WedmStatusControlCiBuilder.StatusTypes
Available types for status control
|
WedmUserDefinedBuilder
Represents a WedmUserDefined Builder
To create a new instance of this class, use OperationCollection.createWedmUserDefinedBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
WireGuide
Represents a wire guide object
To create a new instance of this class, use WireTool.createWireGuide() Created in NX9.0.0 |
WireGuideList
Represents a list of objects.
|
WireTool
Represents a Wire Tool
To create a new instance of this class, use NCGroupCollection.createWireTool(nxopen.cam.CAMObject) Created in NX9.0.0 |
WorkInstructionBuilder
Represents the builder for Work Instruction
To create a new instance of this class, use CAMSetup.createWorkInstructionBuilder(nxopen.cam.CAMObject) Created in NX9.0.3 |
WorkInstructionOutputBuilder
Represents the builder for Work Instruction Output.
|
WorkInstructionOutputBuilder.OutputFormatType
the output format type
|
WorkInstructionOutputBuilder.PageOrientationType
the page orientation type
|
WorkInstructionOutputBuilder.PageSizeType
the page size type
|
ZAxisSmoothing |
ZAxisSmoothing.Options
Available options for z axis smoothing
|
ZLevelMillingBuilder
Represents a ZLevelMilling Builder
To create a new instance of this class, use OperationCollection.createZlevelMillingBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
Class and Description |
---|
CAMAttribute
Represents a CAM Feature Attribute
To obtain an instance of this class use CAMFeature Created in NX8.0.0 |
CAMFeature
Represents a CAM Feature
To obtain an instance of this class use FeatureRecognitionBuilder Created in NX7.5.0 |
Geometry
Represents a CAM geometry object .
|
GeometrySet
Represents a geometry set for a CAM object.
|
Class and Description |
---|
CAMObject
Represents interface for all CAM Object
To create or edit an instance of this class, use ParamBuilder Created in NX4.0.0 |
CollisionPairBuilder
Represents a
CollisionPairBuilder
To create a new instance of this class, use KinematicConfigurator.createCollisionPairBuilder() Created in NX6.0.0 |
ConvertFromMCDBuilder
Represents a
ConvertFromMCDBuilder To create a new instance of this class, use KinematicConfigurator.createConvertFromMcdBuilder() Created in NX9.0.0 |
SimulationOptionsBuilder
Represents a
SimulationOptionsBuilder
To create a new instance of this class, use KinematicConfigurator.createSimulationOptionsBuilder(nxopen.cam.SimulationOptionsBuilder.DialogType) Created in NX6.0.0 |
SimulationOptionsBuilder.DialogType
the dialog type
|
Copyright 2017 Siemens Product Lifecycle Management Software Inc. All Rights Reserved.