Package | Description |
---|---|
nxopen.cam |
Provides classes and interfaces for Manufacturing.
|
Modifier and Type | Interface and Description |
---|---|
interface |
BarrelToolBuilder
Represents a BarrelTool Builder
To create a new instance of this class, use NCGroupCollection.createBarrelToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
DrillBackCountersinkTool
Represents a Drill Back Countersink Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillBackCountersinkTool(nxopen.cam.CAMObject) Created in NX10.0.2 |
interface |
DrillBackSpotfacingToolBuilder
Represents a drill back spotfacing Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillBackSpotfacingToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
DrillBoreToolBuilder
Represents a drill bore Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillBoreToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
DrillBoringBarTool
Represents a new Boring Bar Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillBoringBarTool(nxopen.cam.CAMObject) Created in NX11.0.1 |
interface |
DrillBurnishingToolBuilder
Represents a drill burnishing Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillBurnishingToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
DrillCenterBellToolBuilder
Represents a Drill Center Bell Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillCenterBellToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
DrillChamferBoringBarTool
Represents a Chamfer Boring Bar Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillChamferBoringBarTool(nxopen.cam.CAMObject) Created in NX11.0.1 |
interface |
DrillCoreToolBuilder
Represents a drill core Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillCoreToolBuilder(nxopen.cam.CAMObject) Created in NX9.0.0 |
interface |
DrillCounterboreToolBuilder
Represents a drill counterbore Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillCounterboreToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
DrillCtskToolBuilder
Represents a Drill Ctsk Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillCtskToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
DrillGeomBuilder
Represents a DrillGeom Builder
To create a new instance of this class, use NCGroupCollection.createDrillGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
DrillMethodBuilder
Represents a Drill Method Builder
To create a new instance of this class, use NCGroupCollection.createDrillMethodBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
DrillReamerToolBuilder
Represents a drill Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillReamerToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
DrillSpotdrillToolBuilder
Represents a drill spotdrill Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillSpotdrillToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
DrillSpotfaceToolBuilder
Represents a drill spotface tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillSpotfaceToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
DrillStdToolBuilder
Represents a drill std Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillStdToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
DrillStepToolBuilder
Represents a drill step Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillStepToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
DrillTapToolBuilder
Represents a drill tap Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillTapToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
DrillThreadMillToolBuilder
Represents a drill thread mill Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillThreadMillToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
DrillToolBuilder
Represents a drill Tool Builder
This is an abstract class, and cannot be instantiated. |
interface |
FeatureBasedGeomBuilder
Represents a FeatureBasedGeom Builder
To create a new instance of this class, use NCGroupCollection.createFeatureBasedGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
FeatureGeomBuilder
Represents a FeatureGeom Builder
This is an abstract class, and cannot be instantiated. |
interface |
FeatureGroupBuilder
Represents a FeatureBasedGeom Builder
To create a new instance of this class, use NCGroupCollection.createFeatureGroupBuilder(nxopen.cam.CAMObject) Created in NX9.0.3 |
interface |
FormToolBuilder
Represents a Form tool builder
To create a new instance of this class, use NCGroupCollection.createFormToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
GenericToolBuilder
Represents a Generic Tool Builder
To create a new instance of this class, use NCGroupCollection.createGenericToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
GrooveToolBuilder
Represents a Groove tool builder
To create a new instance of this class, use NCGroupCollection.createGrooveToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
HoleBossGeometry
Represents a CAM geometry builder
To create a new instance of this class, use NCGroupCollection.createHoleBossGeometryBuilder(nxopen.cam.CAMObject) Created in NX7.5.0 |
interface |
InspectionMethodBuilder
Represents the builder for a CMM Inspection method.
|
interface |
InspectionProbeToolBuilder
Represents an Inspection Probe Tool Builder
To create a new instance of this class, use InspectionGroupCollection.createInspectionProbeToolBuilder(nxopen.cam.CAMObject) Created in NX9.0.0 |
interface |
LaserMethod
Represents a Laser Method
To create a new instance of this class, use NCGroupCollection.createLaserMethod(nxopen.cam.CAMObject) Created in NX9.0.0 |
interface |
LaserTool
Represents a Laser Tool
To create a new instance of this class, use NCGroupCollection.createLaserTool(nxopen.cam.CAMObject) Created in NX9.0.0 |
interface |
MachineGroupBuilder
Represents a MachineGroup Builder
To create a new instance of this class, use NCGroupCollection.createMachineGroupBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
MachineHeadGroupBuilder
Represents a MachineHeadGroup Builder
To create a new instance of this class, use NCGroupCollection.createMachineHeadGroupBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
MachinePocketGroupBuilder
Represents a MachinePocketGroup Builder
To create a new instance of this class, use NCGroupCollection.createMachinePocketGroupBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
MachineTurretGroupBuilder
Represents a MachineTurretGroup Builder
To create a new instance of this class, use NCGroupCollection.createMachineTurretGroupBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
MethodBuilder
Represents a Method Builder
This is an abstract class, and cannot be instantiated. |
interface |
MillAreaGeomBuilder
Represents a MillAreaGeom Builder
To create a new instance of this class, use NCGroupCollection.createMillAreaGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
MillBoundaryGeomBuilder
Represents a MillBoundaryGeom Builder
To create a new instance of this class, use NCGroupCollection.createMillBoundaryGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
MillFormToolBuilder
Represents a MillForm Tool Builder
To create a new instance of this class, use NCGroupCollection.createMillFormToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
MillGeomBuilder
Represents a MillGeom Builder
To create a new instance of this class, use NCGroupCollection.createMillGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
MillingToolBuilder
Represents a MillingTool Builder
This is an abstract class, and cannot be instantiated. |
interface |
MillMethodBuilder
Represents a Mill Method Builder
To create a new instance of this class, use NCGroupCollection.createMillMethodBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
MillOrientGeomBuilder
Represents a MillOrientGeom Builder
To create a new instance of this class, use NCGroupCollection.createMillOrientGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
MillTextGeomBuilder
Represents a MillTextGeom Builder
To create a new instance of this class, use NCGroupCollection.createMillTextGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
MillToolBuilder
Represents a Mill Tool Builder
To create a new instance of this class, use NCGroupCollection.createMillToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
MillVolumeGeomBuilder
Represents a MillVolumeGeom Builder
To create a new instance of this class, use NCGroupCollection.createMillVolumeGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
MultiBladeGeomBuilder
Represents a MultiBladeGeomBuilder Builder
To create a new instance of this class, use NCGroupCollection.createMultiBladeGeometryBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
interface |
MultiToolBuilder
Represents a MultiTool Builder
To create a new instance of this class, use NCGroupCollection.createMultiToolBuilder(nxopen.cam.CAMObject) Created in NX11.0.1 |
interface |
OptimizeTraverseGroupBuilder
Represents a OptimizeTraverseGroup Builder
To create a new instance of this class, use NCGroupCollection.createOptimizeTraverseGroupBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
OrientGeomBuilder
Represents a OrientGeom Builder
This is an abstract class, and cannot be instantiated. |
interface |
ProbeToolBuilder
Represents a Probe Tool Builder
To create a new instance of this class, use NCGroupCollection.createProbeToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
ProgramOrderGroupBuilder
Represents a ProgramOrderGroup Builder
To create a new instance of this class, use NCGroupCollection.createProgramOrderGroupBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
RotaryFinishGeomBuilder
Represents a rotary finish geometry builder.
|
interface |
SoftTool
Represents a SoftTool
This is an abstract class, and cannot be instantiated. |
interface |
SolidToolBuilder
Represents a SolidTool Builder
This is an abstract class, and cannot be instantiated. |
interface |
ThreadToolBuilder
Represents a Thread tool builder
To create a new instance of this class, use NCGroupCollection.createThreadToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
ToolBuilder
Represents a Tool Builder
This is an abstract class, and cannot be instantiated. |
interface |
TToolBuilder
Represents a T Tool Builder
To create a new instance of this class, use NCGroupCollection.createTToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
TurnAvoidanceGeomBuilder
Represents a TurnAvoidanceGeom Builder
To create a new instance of this class, use NCGroupCollection.createTurnAvoidanceGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
TurnBoundaryGeomBuilder
Represents a TurnBoundaryGeom Builder
To create a new instance of this class, use NCGroupCollection.createTurnBoundaryGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
TurnFeatureGeomBuilder
Represents a TurnFeatureGeom Builder
To create a new instance of this class, use NCGroupCollection.createTurnFeatureGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
TurnGeomBuilder
Represents a TurnGeom Builder
To create a new instance of this class, use NCGroupCollection.createTurnGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
TurningToolBuilder
Represents a Turning tool builder
This is an abstract class, and cannot be instantiated. |
interface |
TurnMethodBuilder
Represents a Turn Method Builder
To create a new instance of this class, use NCGroupCollection.createTurnMethodBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
TurnOrientGeomBuilder
Represents a TurnOrientGeom Builder
To create a new instance of this class, use NCGroupCollection.createTurnOrientGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
TurnToolBuilder
Represents a Turn tool builder
To create a new instance of this class, use NCGroupCollection.createTurnToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
WedmGeomBuilder
Represents a WedmGeom Builder
To create a new instance of this class, use NCGroupCollection.createWedmGeomBuilder(nxopen.cam.CAMObject) Created in NX7.5.0 |
interface |
WedmMethodBuilder
Represents a Wedm Method Builder
To create a new instance of this class, use NCGroupCollection.createWedmMethodBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
WedmOrientGeomBuilder
Represents a WedmOrientGeom Builder
To create a new instance of this class, use NCGroupCollection.createWedmOrientGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
WireTool
Represents a Wire Tool
To create a new instance of this class, use NCGroupCollection.createWireTool(nxopen.cam.CAMObject) Created in NX9.0.0 |
Copyright 2017 Siemens Product Lifecycle Management Software Inc. All Rights Reserved.