Package | Description |
---|---|
nxopen |
Provides classes and interfaces for the NX Open Common API.
|
nxopen.ame |
Provides classes and interfaces for AME.
|
nxopen.annotations |
Provides classes and interfaces relating to Dimensions, Notes, Symbols, PMI, and other Annotations.
|
nxopen.assemblies |
Provides classes and interfaces for Assemblies.
|
nxopen.assemblies.productinterface |
Provides classes and interfaces for Assembly Product Interfaces.
|
nxopen.bodydes |
Provides classes and interfaces for Body Design.
|
nxopen.cae |
Provides classes and interfaces relating to Advanced Simulation and Design Simulation.
|
nxopen.cae.aerostructures |
Provides classes and interfaces relating to Aero Structures.
|
nxopen.cae.modelcheck |
Provides classes and interfaces relating to Model Check.
|
nxopen.cae.optimization |
Provides classes and interfaces relating to Optimization.
|
nxopen.cae.responsesimulation |
Provides classes and interfaces for Response Simulation.
|
nxopen.cam |
Provides classes and interfaces for Manufacturing.
|
nxopen.diagramming |
Provides classes and interfaces relating to Diagramming.
|
nxopen.diagramming.tables |
Provides classes and interfaces for Diagramming Tables.
|
nxopen.die |
Provides classes and interfaces relating to Die Engineering and Die Design.
|
nxopen.display |
Provides classes and interfaces for Display.
|
nxopen.drafting |
Provides classes and interfaces for the Drafting.
|
nxopen.drawings |
Provides classes and interfaces for Drafting Drawings.
|
nxopen.facet |
Provides classes and interfaces for Faceted Representations.
|
nxopen.features |
Provides classes and interfaces for features.
|
nxopen.features.sheetmetal |
Provides classes and interfaces for Sheet Metal Features.
|
nxopen.features.shipdesign |
Provides classes and interfaces for Ship Design.
|
nxopen.features.shipdesign.generalarrangement |
Provides classes and interfaces for Ship Design General Arrangement.
|
nxopen.features.subdivision |
Provides classes and interfaces for Subdivision Body feature.
|
nxopen.features.vehicledesign |
Provides classes and interfaces for Vehicle Design.
|
nxopen.fields |
Provides classes and interfaces for Fields.
|
nxopen.formboard |
Provides interfaces and classes to the Routing Electrical Formboard functionality.
|
nxopen.gateway |
Provides classes and interfaces for Gateway.
|
nxopen.geometricanalysis |
Provides classes and interfaces for Geometric Analysis.
|
nxopen.geometricanalysis.sectionanalysis |
Provides classes and interfaces for Section Analysis.
|
nxopen.geometricutilities |
Provides classes and interfaces for Geometric Utilities.
|
nxopen.issue |
Provides classes and interfaces for Issue Management.
|
nxopen.layout2d |
Provides classes and interfaces for Layout2D.
|
nxopen.linedesigner |
Provides classes and interfaces for Line Designer.
|
nxopen.markup |
Provides classes and interfaces for Markup.
|
nxopen.mechanicalrouting |
Provides classes and interfaces for Mechanical Routing.
|
nxopen.mechatronics |
Provides classes and interfaces for Mechatronics.
|
nxopen.mfg.am |
Provides classes and interfaces for AM.
|
nxopen.motion |
Provides classes and interfaces for Motion Simulation.
|
nxopen.optimization |
Provides classes and interfaces for Optimization.
|
nxopen.pdm |
Provides classes and interfaces for PDM.
|
nxopen.physmat |
Provides classes and interfaces for Physical Material.
|
nxopen.pid |
Provides classes and interfaces for PID.
|
nxopen.placement |
Provides classes and interfaces for Placement.
|
nxopen.plas |
Provides classes and interfaces for PLAS.
|
nxopen.positioning |
Provides classes and interfaces for Assembly Positioning and Constraints.
|
nxopen.preferences |
Provides classes and interfaces for preferences.
|
nxopen.presslinesimulation |
Provides classes and interfaces for Press Line Simulation.
|
nxopen.report |
Provides classes and interfaces for Report.
|
nxopen.routing |
Provides classes and interfaces for Routing.
|
nxopen.routing.electrical |
Provides classes and interfaces for Routing Electrical.
|
nxopen.shapesearch |
Provides classes and interfaces for Shape Search.
|
nxopen.shipdesign |
Provides classes and interfaces for Ship Design.
|
nxopen.sim |
Provides classes and interfaces for Machine Tool Builder and CAM-Simulation.
|
nxopen.sim.postconfigurator |
Provides classes and interfaces for Post Configurator.
|
nxopen.tooldesigner |
Provides classes and interfaces for ToolDesigner.
|
nxopen.tooling |
Provides classes and interfaces for Tooling.
|
nxopen.userdefinedtemplate |
Provides classes and interfaces for User Defined Template.
|
nxopen.validate |
Provides classes and interfaces for Validation Utilities.
|
nxopen.visualreporting |
Provides classes and interfaces for Visual Reporting.
|
nxopen.weld |
Provides classes and interfaces for Weld.
|
Modifier and Type | Interface and Description |
---|---|
interface |
AcisExporter
Represents a
AcisExporter to be used when importing the Acis Data
This class is created using DexManager . |
interface |
AcisImporter
Represents a
AcisImporter to be used when importing the Acis Data
This class is created using DexManager . |
interface |
ASCImporter
Represents a
ASCImporter . |
interface |
AttributePropertiesBaseBuilder
Represents an
AttributePropertiesBaseBuilder to be used for creating attributes. |
interface |
AttributePropertiesBuilder
Represents an
AttributePropertiesBuilder . |
interface |
AttributeTemplatesBuilder
Represents an
AttributeTemplatesBuilder to be used when creating attribute
templates. |
interface |
Catiav4Creator
Represents a
Catiav4Creator to be used when exporting the CATIA V4 Data
This class is created using DexManager . |
interface |
Catiav4Importer
Represents a
Catiav4Importer to be used when importing the CATIA V4 Data
This class is created using DexManager . |
interface |
Catiav5Creator
Represents a
Catiav5Creator to be used when exporting the CATIA V5 Data
This class is created using DexManager . |
interface |
Catiav5Importer
Represents a
Catiav5Importer to be used when importing the CATIA V5 Data
This class is created using DexManager . |
interface |
CGMBuilder
Represents a
CGMBuilder to be used when exporting the Current Display
or drawing sheets to a CGM. |
interface |
CGMImporter
Used to import a CGM file into the work part.
|
interface |
ConvertToFromReferenceBuilder
Represents a
ConvertToFromReferenceBuilder
To create a new instance of this class, use SketchCollection.createConvertToFromReferenceBuilder() Created in NX5.0.0 |
interface |
DexBuilder
This is an abstract class that provides the basic functionality common to all dex builders.
|
interface |
DxfdwgCreator
Represents a
DxfdwgCreator to be used when exporting the DXF/DWG Data
This class is created using DexManager . |
interface |
DxfdwgImporter
Represents a
DxfdwgImporter to be used when importing the DXF/DWG Data
This class is created using DexManager . |
interface |
EffectivityConditionBuilder
Represent a utility class to assign or edit discrete and range effectivity unit values in the
context of a
CollaborativeDesign . |
interface |
FeatureGeneralPropertiesBuilder
Represents a
FeatureGeneralPropertiesBuilder to be used for modifying
the names of features and general objects. |
interface |
FileNew
Represents a
FileNew
This class is not directly created. |
interface |
FlatteningBuilder
Deprecated.
Deprecated in NX11.0.0. Use
FlatteningAndFormingBuilder instead.
|
interface |
FourPointSurfaceBuilder
Represents a four point sheet body builder
To create a new instance of this class, use BodyCollection.createFourPointSurfaceBuilder() Created in NX6.0.0 |
interface |
GroupBuilder
Represents a
GroupBuilder
To create a new instance of this class, use BasePart.createGatewayGroupBuilder(nxopen.Group) Default values. |
interface |
HumanHandsDialogBuilder
Dialog for creating and editing standalone/"disembodied" hand figures
To create a new instance of this class, use HumanBuilder.createHumanHandsDialogBuilder() Default values. |
interface |
HumanPosturePredictionBuilder
Represents a Human Posture Prediction Builder.
|
interface |
IgesCreator
Represents a
IgesCreator to be used when exporting the IGES Data
This class is created using DexManager . |
interface |
IgesImporter
Represents a
IgesImporter to be used when importing the IGES Data
This class is created using DexManager . |
interface |
Importer
Base class for importing data into the work part.
|
interface |
InferredConstraintsBuilder
Represents a
InferredConstraintsBuilder
To create a new instance of this class, use SketchCollection.createInferredConstraintsBuilder() Created in NX5.0.0 |
interface |
InterpartExpressionsBuilder
This class creates interpart expressions from the source part to the current work part via the naming rule defined.
|
interface |
ItemCacheMappedEntityBuilder
Generic journal methods for ItemCacheMappedEntityBuilder
Not support KF. |
interface |
JtCreator
Represents a
JtCreator to be used when exporting the JT Data
This class is created using PvtransManager . |
interface |
LinkedMirrorPartBuilder
builder class of LinkedMirrorPartBuilder
To create a new instance of this class, use PartCollection.createLinkedMirrorPartBuilder(nxopen.Part) Default values. |
interface |
ListCreator
Represents a
ListCreator to be used when exporting the JT Data
This class is created using PvtransManager . |
interface |
MassPropertiesBuilder
Represents a
MassPropertiesBuilder for calculating the weight of
selected objects as well as informing the part that the assemblies weight property
data needs to be updated on save. |
interface |
MeasureAngleBuilder
Represents a
MeasureAngleBuilder
To create a new instance of this class, use MeasureManager.createMeasureAngleBuilder(nxopen.NXObject) Created in NX5.0.0 |
interface |
MeasureBodyBuilder
Represents a
MeasureBodyBuilder
To create a new instance of this class, use MeasureManager.createMeasureBodyBuilder(nxopen.NXObject) Created in NX5.0.0 |
interface |
MeasureBuilder
Represents a
MeasureBuilder
This is an abstract class, and cannot be instantiated. |
interface |
MeasureDistanceBuilder
Represents a
MeasureDistanceBuilder
To create a new instance of this class, use MeasureManager.createMeasureDistanceBuilder(nxopen.NXObject) Created in NX5.0.0 |
interface |
MeasureFaceBuilder
Represents a
MeasureFaceBuilder
To create a new instance of this class, use MeasureManager.createMeasureFaceBuilder(nxopen.NXObject) Created in NX5.0.0 |
interface |
MovieSettingsBuilder
This class is the builder for the Movie Settings.
|
interface |
NXTo2dCreator
Represents a
NXTo2dCreator to be used when exporting the 2D Data
This class is created using DexManager . |
interface |
ObjectGeneralPropertiesBuilder
Represents an
ObjectGeneralPropertiesBuilder to be used for modifying
the names and properties of objects. |
interface |
ObjectSelector
Represents a
ObjectSelector to be used when exporting the the selected objects
from NX part.This class is created using DexManager . |
interface |
ObjectTypeSelector
Represents a
ObjectTypeSelector to be used when filter out the objects
based on the type during import/export. |
interface |
PartImporter
Used to import a part into the work part.
|
interface |
PasteSpecialBuilder
Represents a
PasteSpecialBuilder
To create a new instance of this class, use ClipboardOperationsManager.createPasteSpecialBuilder() Default values. |
interface |
PhysicalMaterialBuilder
Represents a
PhysicalMaterial builder To create a new instance of this class, use PhysicalMaterialCollection.createPhysicalMaterialBuilder(nxopen.PhysicalMaterial.Type) Created in NX6.0.0 |
interface |
PlotBuilder
Represents a
PlotBuilder . |
interface |
PreviewPropertiesBuilder
Represents a
PreviewPropertiesBuilder to be used for creating and storing
previews. |
interface |
Print3dBuilder
This class sends the 3d model for 3dprinting.
|
interface |
PrintBuilder
Represents a
PrintBuilder . |
interface |
PrintPDFBuilder
Represents a
PrintPDFBuilder to be used when exporting the Current Display
or selected sheets to a PDF document. |
interface |
ProeImporter
Represents a
ProeImporter to be used when importing the ProE Data
This class is created using DexManager . |
interface |
ReplaceExpressionsBuilder
This class creates Replace expressions from the source part to the current work part via the naming rule defined.
|
interface |
SketchAlongPathBuilder
Use the
SketchAlongPathBuilder to create or reattach a Sketch along a path. |
interface |
SketchAngularDimensionBuilder
Represents a
SketchAngularDimensionBuilder To create a new instance of this class, use SketchCollection.createAngularDimensionBuilder(nxopen.annotations.AngularDimension) Created in NX9.0.0 |
interface |
SketchAssociativeTrimBuilder
Represents a
SketchAssociativeTrimBuilder
To create a new instance of this class, use SketchCollection.createSketchAssociativeTrimBuilder(nxopen.SketchAssociativeTrim) Default values. |
interface |
SketchAutoConstrainBuilder
Represents a
SketchAutoConstrainBuilder
To create a new instance of this class, use SketchCollection.createAutoConstrainBuilder() Default values. |
interface |
SketchAutoDimensionBuilder
Represents a
SketchAutoDimensionBuilder
To create a new instance of this class, use SketchCollection.createAutoDimensionBuilder() Default values. |
interface |
SketchChamferBuilder
Represents a Chamfer builder
To create a new instance of this class, use SketchCollection.createSketchChamferBuilder() Default values. |
interface |
SketchConicBuilder
Represents a
SketchConicBuilder builder
To create a new instance of this class, use SketchCollection.createSketchConicBuilder(nxopen.NXObject) Default values. |
interface |
SketchConstraintBuilder
Represents a
SketchConstraint builder To create a new instance of this class, use SketchCollection.createConstraintBuilder() Created in NX8.5.0 |
interface |
SketchCornerBuilder
Create a corner between two sketch curves.
|
interface |
SketchDimensionBuilder
Edit the geometry references of an existing sketch dimension.
|
interface |
SketchEditDefiningSectionBuilder
Represents a
SketchEditDefiningSectionBuilder builder. |
interface |
SketchEllipseBuilder
Represents a
SketchEllipseBuilder builder
To create a new instance of this class, use SketchCollection.createSketchEllipseBuilder(nxopen.NXObject) Default values. |
interface |
SketchInDraftingBuilder
|
interface |
SketchInPlaceBuilder
|
interface |
SketchIntersectionCurveBuilder
Represents a
SketchIntersectionCurve builder To obtain an instance of this class use SketchCollection.createIntersectionCurveBuilder(nxopen.SketchIntersectionCurve) . |
interface |
SketchIntersectionPointBuilder
Represents a
SketchIntersectionPoint builder To obtain an instance of this class use SketchCollection.createIntersectionPointBuilder(nxopen.SketchIntersectionPoint) . |
interface |
SketchLinearDimensionBuilder
Represents a
SketchLinearDimensionBuilder To create a new instance of this class, use SketchCollection.createLinearDimensionBuilder(nxopen.annotations.Dimension) Created in NX9.0.0 |
interface |
SketchMakeSymmetricBuilder
This class is used to add symmetric contraint to objects from a
SketchMakeSymmetricBuilder . |
interface |
SketchMirrorPatternBuilder
Represents a
SketchMirrorPatternBuilder
To create a new instance of this class, use SketchCollection.createSketchMirrorPatternBuilder(nxopen.SketchPattern) Default values. |
interface |
SketchOffsetBuilder
Represents a
SketchOffsetBuilder
To create a new instance of this class, use SketchCollection.createSketchOffsetBuilder(nxopen.SketchOffset) Default values. |
interface |
SketchPasteBuilder
Represents a
SketchPasteBuilder To create a new instance of this class, use SketchCollection.createSketchPasteBuilder(nxopen.Sketch[]) Default values. |
interface |
SketchPatternBuilder
Represents a
SketchPatternBuilder
To create a new instance of this class, use SketchCollection.createSketchPatternBuilder(nxopen.SketchPattern) Default values. |
interface |
SketchPolygonBuilder
Represents a
SketchPolygon builder To create a new instance of this class, use SketchCollection.createSketchPolygonBuilder(nxopen.SketchPolygon) Default values. |
interface |
SketchProjectBuilder
Represents a
SketchProjectBuilder builder
To create a new instance of this class, use SketchCollection.createProjectBuilder(nxopen.features.Feature) Default values. |
interface |
SketchQuickExtendBuilder
Represents a
SketchQuickExtendBuilder
To create a new instance of this class, use SketchCollection.createQuickExtendBuilder() Default values. |
interface |
SketchQuickTrimBuilder
Represents a
SketchQuickTrimBuilder
To create a new instance of this class, use SketchCollection.createQuickTrimBuilder() Default values. |
interface |
SketchRadialDimensionBuilder
Represents a
SketchRadialDimensionBuilder To create a new instance of this class, use SketchCollection.createRadialDimensionBuilder(nxopen.annotations.Dimension) Created in NX9.0.0 |
interface |
SketchRapidDimensionBuilder
Represents a
SketchRapidDimensionBuilder To create a new instance of this class, use SketchCollection.createRapidDimensionBuilder() Created in NX9.0.0 |
interface |
Step203Creator
Deprecated.
Deprecated in NX11.0.0. Use
StepCreator instead.
|
interface |
Step203Importer
Represents a
Step203Importer to be used when importing the STEP203 Data
This class is created using DexManager . |
interface |
Step214Creator
Deprecated.
Deprecated in NX11.0.0. Use
StepCreator instead.
|
interface |
Step214Importer
Represents a
Step214Importer to be used when importing the STEP214 Data
This class is created using DexManager . |
interface |
Step242Importer
Represents a
Step242Importer to be used when importing STEP242 Data
This class is created using DexManager . |
interface |
StepCreator
Represents a
StepCreator to be used when exporting the STEP Data
This class is created using DexManager . |
interface |
STLCreator
Represents a
STLCreator to be used when exporting the STL Data
This class is created using DexManager . |
interface |
STLImporter
Used to import an STL file into the work part.
|
interface |
SuppressByExpressionBuilder
Represents a
SuppressByExpressionBuilder
To create a new instance of this class, use ExpressionCollection.createSuppressByExpressionBuilder() Default values. |
interface |
SurfaceUVDirectionBuilder
Represents an edit surface u/v direction builder that allows reversing or swapping parametric directions.
|
interface |
VirtuallabImporter
Represents a
VirtuallabImporter to be used when importing the Virtuallab Data
This class is created using DexManager . |
interface |
VRMLImporter
Used to import a VRML file into the work part.
|
Modifier and Type | Interface and Description |
---|---|
interface |
AccessorEvaluatorBuilder
Evaluates an object based on a property value or an index
To create a new instance of this class, use AMEManager.createAccessorEvaluatorBuilder(nxopen.Part, nxopen.ame.ExpressionEvaluator) Created in NX12.0.0 |
interface |
AMEBaseBuilder
JA class for the insert Eng object dialog
This is an abstract class, and cannot be instantiated. |
interface |
AncestorEvaluatorBuilder
Evaluates an ancestor for a given aspect and a starting point
To create a new instance of this class, use AMEManager.createAncestorEvaluatorBuilder(nxopen.Part, nxopen.ame.ExpressionEvaluator) Created in NX12.0.0 |
interface |
AspectDetailsBuilder
JA Class for the Aspect Details UI Block
This object does not need a creator. |
interface |
AspectNavigatorPreferencesBuilder
JA class for aspect navigator builder
To create a new instance of this class, use AMEManager.createAspectNavigatorPreferencesBuilder(nxopen.Part) Created in NX11.0.0 |
interface |
AspectPrefixBuilder
represents the builder class which is used to define Aspect Prefixes and Delimiter for
Project To create a new instance of this class, use AMEManager.createAspectPrefixBuilder(nxopen.Part) Created in NX11.0.0 |
interface |
AssignAspectBuilder
Reassign a single aspect of an Engineering Object
To create a new instance of this class, use AMEManager.createAssignAspectBuilder(nxopen.Part) Created in NX11.0.0 |
interface |
AssignSubnetBuilder
Reassign a single aspect of an Engineering Object
To create a new instance of this class, use AMEManager.createAssignSubnetBuilder(nxopen.Part) Created in NX12.0.0 |
interface |
AssignTemplateToProductBuilder
Builder class to assign a template object to
ProductDefinition To create a new instance of this class, use AMEManager.createAssignTemplateToProductBuilder(nxopen.ame.ProductDefinition) Created in NX12.0.0 |
interface |
AssignTypeBuilder
Builder for selecting an engineering object definition
To create a new instance of this class, use AMEManager.createAssignTypeBuilder(nxopen.Part) Created in NX12.0.0 |
interface |
BaseEvaluatorBuilder
Represents the builder for all the evaluators.
|
interface |
BreakTemplateBuilder
JA class for the insert Eng object dialog
To create a new instance of this class, use AMEManager.createBreakTemplateBuilder(nxopen.Part, nxopen.ame.AMEEngObject) Created in NX11.0.0 |
interface |
BulkConnectionBuilder
builder for the bulk connection dialog
To create a new instance of this class, use AMEManager.createBulkConnectionBuilder(nxopen.Part) Created in NX11.0.0 |
interface |
BulkEngineeringObjectBuilder
BulkEngineeringObjectBuilder class will be used for bulk Engineering Object Operation.
|
interface |
CabinetDesignBuilder
the builder for creating cabinet design
To create a new instance of this class, use AMEManager.createCabinetDesignBuilder(nxopen.Part) Created in NX12.0.0 |
interface |
CallMethodRuleBuilder
JA class for the call method rule dialog
To create a new instance of this class, use AMEManager.createCallMethodRuleBuilder(nxopen.Part, nxopen.ame.PlcCodePosition, nxopen.ame.PlcBlock, nxopen.ame.PlcRule.Type, nxopen.ame.PlcRule.RefObjectType, nxopen.ame.PlcRule.ReplacementType, int, int, int) Created in NX12.0.0 |
interface |
ChildrenEvaluatorBuilder
Evaluates the children objects for a given aspect and a starting point
To create a new instance of this class, use AMEManager.createChildrenEvaluatorBuilder(nxopen.Part, nxopen.ame.ExpressionEvaluator) Created in NX12.0.0 |
interface |
ConfigureResultTableBuilder
Represents configure result table class builder
To create a new instance of this class, use AMEManager.createConfigureResultTableBuilder(nxopen.ame.AMEQuery) Created in NX12.0.0 |
interface |
ConnectedObjectsEvaluatorBuilder
Evaluates the connected objects for the given port and a starting point
To create a new instance of this class, use AMEManager.createConnectedObjectsEvaluatorBuilder(nxopen.Part, nxopen.ame.ExpressionEvaluator) Created in NX12.0.0 |
interface |
ConnectToLibraryItemBuilder
JA class for the connect to library item dialog
To create a new instance of this class, use AMEManager.connectToLibraryItemBuilder(nxopen.Part, nxopen.ame.InterfaceMemberPort) Created in NX11.0.0 |
interface |
CreateDefinitionBuilder
Create and classify definition
This object does not need a creator. |
interface |
CreateEngObjectDefinitionBuilder
Create and classify engineering object definition
To create a new instance of this class, use AMEManager.createEngObjectDefinitionBuilder(nxopen.Part) Created in NX11.0.0 |
interface |
CreatePmiNoteBuilder
Create PMINote dialog JA class
To create a new instance of this class, use AMEManager.createPmiNoteBuilder(nxopen.Part) Created in NX11.0.0 |
interface |
CreateProductBuilder
Create and classify product
To create a new instance of this class, use AMEManager.createProductBuilder(nxopen.Part) Created in NX11.0.0 |
interface |
CreateTemplateBuilder
Create Template dialog JA class
To create a new instance of this class, use AMEManager.createTemplateBuilder(nxopen.Part) Created in NX11.0.0 |
interface |
CreateTemplateDefinitionBuilder
Create and classify template definition
To create a new instance of this class, use AMEManager.createTemplateDefinitionBuilder(nxopen.Part) Created in NX11.0.0 |
interface |
DefineAspectBuilder
Define Aspects for Engineering Object Definition
To create a new instance of this class, use AMEManager.defineAspectBuilder(nxopen.Part) Created in NX11.0.0 |
interface |
DocumentStructureBuilder
Class to define Document Structure
To create a new instance of this class, use AMEManager.createDocumentStructureBuilder(nxopen.Part) Created in NX11.0.0 |
interface |
EditAnnotationBuilder
the builder for creating edit annotation
To create a new instance of this class, use AMEManager.createEditAnnotationBuilder(nxopen.Part, nxopen.ame.AMEExtendedObject) Created in NX12.0.0 |
interface |
EditClauseBuilder
Naming Rule Builder
To create a new instance of this class, use AMEManager.createEditClauseBuilder(nxopen.Part, nxopen.ame.AMEQuery, nxopen.ame.QueryClause) Default values. |
interface |
EditEngineeringObjectBuilder
JA class for the Eng object dialog
To create a new instance of this class, use AMEManager.createEditEngineeringObjectBuilder(nxopen.Part, nxopen.ame.AMEEngObject) Created in NX11.0.0 |
interface |
EditOrderBuilder
JA class for the Edit Order dialog
To create a new instance of this class, use AMEManager.createEditOrderBuilder(nxopen.Part, nxopen.NXObject) Created in NX12.0.0 |
interface |
EditQueryBuilder
Edit Query Builder
To create a new instance of this class, use AMEManager.createEditQueryBuilder(nxopen.Part) Created in NX11.0.0 |
interface |
ElectricalAnnotationSettingsBuilder
JA class for the Electrical Annotation Settings dialog
To create a new instance of this class, use AMEManager.createElectricalAnnotationSettingsBuilder(nxopen.Part) Created in NX11.0.0 |
interface |
ElectricalConnectionSettingsBuilder
Builder object for changing electrical connection settings on diagramming pages associated with the
Project . |
interface |
EngineeringObjectBaseBuilder
JA class for the insert Eng object dialog
This is an abstract class, and cannot be instantiated. |
interface |
EngineeringObjectBuilder
JA class for the insert Eng object dialog
To create a new instance of this class, use AMEManager.createEngineeringObjectBuilder(nxopen.Part) Created in NX11.0.0 |
interface |
EngineeringObjectDefinitionLabelBuilder
JA class for the insert Engineering object definition label dialog
To create a new instance of this class, use AMEManager.createEngineeringObjectDefinitionLabelBuilder(nxopen.Part) Created in NX11.0.0 |
interface |
EplanImportProjectTemplateBuilder
EplanImportProjectTemplateBuilder
To create a new instance of this class, use AMEManager.createEplanImportProjectTemplateBuilder(nxopen.Part) Created in NX12.0.0 |
interface |
EplanProjectGenerationBuilder
the eplan project generation dialog builder
To create a new instance of this class, use AMEManager.createEplanProjectGenerationBuilder(nxopen.Part) Default values. |
interface |
EplanProjectTemplateAndStructureBuilder
JA class for the Eplan project template dialog
To create a new instance of this class, use AMEManager.createEplanProjectTemplateAndStructureBuilder(nxopen.Part) Created in NX12.0.0 |
interface |
EplanSettingsBuilder
EplanSettingsBuilder
To create a new instance of this class, use AMEManager.createEplanSettingsBuilder(nxopen.Part, nxopen.ame.AMEBaseNode) Created in NX11.0.0 |
interface |
EplanStructureIdentifierOrderBuilder
Represents a Eplan Structure identifier order Builder
To create a new instance of this class, use AMEManager.createEplanStructureIdentifierOrderBuilder(nxopen.Part) Created in NX12.0.0 |
interface |
EvaluatorCopyToBuilder
Copies evaluator and its dependents from one engineering object to another
To create a new instance of this class, use AMEManager.createEvaluatorCopyToBuilder(nxopen.Part) Created in NX12.0.0 |
interface |
ExportEClassMappingBuilder
Export eclass mapping into file
To create a new instance of this class, use AMEManager.createExportEclassMappingBuilder(nxopen.Part) Created in NX12.0.0 |
interface |
ExtractAttributeAbsoluteBuilder
Create a extract attribute
This object does not need a creator. |
interface |
ExtractAttributeBaseBuilder
Create a extract attribute
This is an abstract class, and cannot be instantiated. |
interface |
ExtractAttributeBuilder
Create a extract attribute
To create a new instance of this class, use AMEManager.createExtractAttributeBuilder(nxopen.Part) Created in NX11.0.0 |
interface |
ExtractAttributeCurrentObjectBuilder
Create a extract attribute
This object does not need a creator. |
interface |
ExtractAttributePortBuilder
Create a extract port attribute builder
This object does not need a creator. |
interface |
ExtractAttributeRelativeBuilder
Create a extract attribute
This object does not need a creator. |
interface |
FormSheetBuilder
JA class for the Form Sheet dialog
To create a new instance of this class, use AMEManager.createFormSheetBuilder(nxopen.Part, nxopen.ame.FormSheetObject) Default values. |
interface |
FormSheetSettingsBuilder
JA class for the Form Sheet Settings dialog
To create a new instance of this class, use AMEManager.createFormSheetSettingsBuilder(nxopen.Part) Created in NX12.0.0 |
interface |
FragmentBuilder
Represents a Fragment creation class Builder
To create a new instance of this class, use AMEManager.createFragmentBuilder(nxopen.Part) Created in NX11.0.0 |
interface |
FunctionCallInstanceBuilder
JA class for the reuse rule dialog
To create a new instance of this class, use AMEManager.createFunctionCallInstanceBuilder(nxopen.Part, nxopen.ame.PlcBlock) Created in NX12.0.0 |
interface |
GeneralAnnotationSettingsBuilder
builder for the general annotation settings dialog
To create a new instance of this class, use AMEManager.createGeneralAnnotationSettingsBuilder(nxopen.Part) Created in NX11.0.0 |
interface |
GeneralConnectionSettingsBuilder
Builder for the General Connection Settings dialog
To create a new instance of this class, use AMEManager.createGeneralConnectionSettingsBuilder(nxopen.Part) Created in NX11.0.0 |
interface |
GenerateReportsBuilder
Comment
To create a new instance of this class, use AMEManager.createGenerateReportsBuilder(nxopen.Part) Created in NX11.0.0 |
interface |
GlobalSelectionBuilder
GlobalSelectionBuilder
To create a new instance of this class, use AMEManager.createGlobalSelectionBuilder(nxopen.Part) Created in NX11.0.0 |
interface |
ImportEClassMappingBuilder
Import eClass mapping
To create a new instance of this class, use AMEManager.createImportEclassMappingBuilder(nxopen.Part) Created in NX12.0.0 |
interface |
ImportEClassProductBuilder
Imports a eclass product xml file
To create a new instance of this class, use AMEManager.createImportEclassProductBuilder(nxopen.Part) Created in NX12.0.0 |
interface |
ImportEClassSchemaBuilder
Imports a eclass schema xml file
To create a new instance of this class, use AMEManager.createImportEclassSchemaBuilder(nxopen.Part) Created in NX12.0.0 |
interface |
ImportEplanPageMacroBuilder
ImportEplanPageMacroBuilder
To create a new instance of this class, use AMEManager.createImportEplanPageMacroBuilder(nxopen.Part) Created in NX11.0.0 |
interface |
ImportGlobalMappingBuilder
Imports a global mapping xml file
To create a new instance of this class, use AMEManager.createImportGlobalMappingBuilder(nxopen.Part) Created in NX12.0.0 |
interface |
ImportHWXmlBuilder
the Import HW Xml builder
To create a new instance of this class, use AMEManager.createImportHwxmlBuilder(nxopen.Part, nxopen.ame.AMEBaseNode) Created in NX11.0.0 |
interface |
InsertObjectBuilder
JA class for Insert Object dialog
To create a new instance of this class, use AMEManager.createInsertObjectBuilder(nxopen.Part) Created in NX12.0.0 |
interface |
InstanceDataBlockBuilder
JA class for the reuse rule dialog
To create a new instance of this class, use AMEManager.createInstanceDataBlockBuilder(nxopen.Part, nxopen.ame.PlcBlock, nxopen.ame.InstanceDataBlockBuilder.CreateMode) Created in NX11.0.0 |
interface |
InstantiateBaseDefinitionReuseSelectionBuilder
Builder for selecting base definition
this is a block . |
interface |
InstantiateTemplateBulkBuilder
JA class for the insert Eng object dialog
To create a new instance of this class, use AMEManager.createInstantiateTemplateBulkBuilder(nxopen.Part, java.lang.String) Default values. |
interface |
InterruptionPointBuilder
Represents builder for AME::DB::InterruptionPoint
To create a new instance of this class, use AMEManager.createInterruptionPointBuilder(nxopen.Part, nxopen.ame.AMEExtendedObject) Created in NX12.0.0 |
interface |
LayoutDefinitionBuilder
interface for the LayoutDefinitionBuilder
To create a new instance of this class, use AMEManager.createLayoutDefinitionBuilder(nxopen.Part) Created in NX11.0.0 |
interface |
LineDesignerMappingBuilder
Line Designer mapping dialog JA interface
To create a new instance of this class, use AMEManager.createLineDesignerMappingBuilder(nxopen.Part) Default values. |
interface |
LinkSymbolToDeviceTypeBuilder
JA class for LinkSymbolToDeviceTypeBuilder dialog
To create a new instance of this class, use AMEManager.createLinkSymbolToDeviceTypeBuilder(nxopen.Part) Created in NX11.0.0 |
interface |
LoadLineDesignerBuilder
JA class for the insert LoadLineDesigner dialog
To create a new instance of this class, use AMEManager.createLoadLineDesignerBuilder(nxopen.Part) Created in NX11.0.0 |
interface |
Manage2dSymbolsBuilder
Represents a Manage2dSymbolsBuilder class Builder
To create a new instance of this class, use AMEManager.createManage2dSymbolsBuilder(nxopen.Part) Default values. |
interface |
Manage3DModelsBuilder
Represents the builder that is used to assign 3D models to a
ProductDefinition
To create a new instance of this class, use AMEManager.createManage3dmodelsBuilder(nxopen.Part) Created in NX11.0.0 |
interface |
ManageEclassMappingBuilder
Represents a ManageEclassMappingBuilder class Builder
To create a new instance of this class, use AMEManager.createManageEclassmappingBuilder(nxopen.Part) Created in NX11.0.0 |
interface |
ManageObjectTypeBuilder
Builder class for assigning AD type to
Part and name to Component To create a new instance of this class, use AMEManager.createManageObjectTypeBuilder(nxopen.Part) Created in NX12.0.0 |
interface |
MapToExistingObjectBuilder
Line Designer map to existing (EO) dialog JA interface
To create a new instance of this class, use AMEManager.createMapToExistingObjectBuilder(nxopen.Part) Created in NX11.0.0 |
interface |
MountingInterfaceBuilder
Builder class for creating mounting interface object in
Part To create a new instance of this class, use AMEManager.createMountingInterfaceBuilder(nxopen.Part) Default values. |
interface |
MultipleObjectsBuilder
JA class for the insert Eng object dialog
This is an abstract class, and cannot be instantiated. |
interface |
NamingRuleBuilder
Naming Rule Builder
To create a new instance of this class, use NamingRuleListBuilder.createRule() Created in NX11.0.0 |
interface |
NamingRuleSettingsBuilder
JA class for dialog for naming rule settings
To create a new instance of this class, use AMEManager.createNamingRuleSettingsBuilder(nxopen.Part) Created in NX11.0.0 |
interface |
ObjectEvaluatorBuilder
Evaluates the object given a starting point
To create a new instance of this class, use AMEManager.createObjectEvaluatorBuilder(nxopen.Part, nxopen.ame.ExpressionEvaluator) Created in NX12.0.0 |
interface |
OperandRuleBuilder
JA class for the parameter rule dialog
To create a new instance of this class, use AMEManager.createOperandRuleBuilder(nxopen.Part, nxopen.ame.PlcCodePosition, nxopen.ame.PlcBlock, int, int, nxopen.ame.PlcRule.Type) Created in NX11.0.0 |
interface |
OperatorRuleBuilder
OperatorRule Dialog
To create a new instance of this class, use AMEManager.createOperatorRuleBuilder(nxopen.Part, nxopen.ame.PlcCodePosition, nxopen.ame.PlcBlock, nxopen.ame.PlcRule.Type, nxopen.ame.PlcRule.RefObjectType, nxopen.ame.PlcRule.ReplacementType, int, int, int) Created in NX12.0.0 |
interface |
OpticalAnnotationSettingsBuilder
JA class for the Optical Annotation Settings dialog
To create a new instance of this class, use AMEManager.createOpticalAnnotationSettingsBuilder(nxopen.Part) Created in NX12.0.0 |
interface |
OpticalConnectionSettingsBuilder
Builder object for changing optical connection settings on diagramming pages associated with the
Project To create a new instance of this class, use AMEManager.createOpticalConnectionSettingsBuilder(nxopen.Part) Created in NX12.0.0 |
interface |
OrderAspectsBuilder
Represents a
OrderAspectsBuilder for changing the order of Navigator
To create a new instance of this class, use AMEManager.createOrderAspectsBuilder(nxopen.Part) Created in NX11.0.0 |
interface |
PageBuilder
Represents a Page creation class Builder
To create a new instance of this class, use AMEManager.createPageBuilder(nxopen.Part) Default values. |
interface |
PageNamingBuilder
Class to define Page naming schema
To create a new instance of this class, use AMEManager.createPageNamingBuilder(nxopen.Part) Default values. |
interface |
ParameterRuleBuilder
JA class for the parameter rule dialog
To create a new instance of this class, use AMEManager.createParameterRuleBuilder(nxopen.Part, nxopen.ame.MultiValueObjectsPort, nxopen.ame.PlcRule.Type, nxopen.ame.MultiValueObjectsPort.JaAmeValueObjectUsageType) Created in NX12.0.0 |
interface |
ParentEvaluatorBuilder
Evaluates the parent object for a given aspect and a starting point
To create a new instance of this class, use AMEManager.createParentEvaluatorBuilder(nxopen.Part, nxopen.ame.ExpressionEvaluator) Created in NX12.0.0 |
interface |
PlaceAutomationBuilder
Reassign a single aspect of an Engineering Object
To create a new instance of this class, use AMEManager.createPlaceAutomationBuilder(nxopen.Part) Created in NX12.0.0 |
interface |
PlcMemoryAreaBuilder
Represents a Subnet creation class Builder
To create a new instance of this class, use AMEManager.createPlcMemoryAreaBuilder(nxopen.Part, nxopen.ame.AMEBaseNode) Created in NX12.0.0 |
interface |
PlcMethodBuilder
The Journalling class for PlcMethodBuilder
To create a new instance of this class, use AMEManager.createPlcMethodBuilder(nxopen.Part, nxopen.ame.PlcMethod) Created in NX11.0.0 |
interface |
PlcSymbolBuilder
Class to create Functional Tags and assign them to PLC Channels
To create a new instance of this class, use AMEManager.createPlcSymbolBuilder(nxopen.Part, nxopen.ame.AMEBaseNode) Created in NX11.0.0 |
interface |
PlcSymbolsEvaluatorBuilder
Evaluates the PLC tags for a given aspect and a starting point
To create a new instance of this class, use AMEManager.createPlcSymbolsEvaluatorBuilder(nxopen.Part, nxopen.ame.ExpressionEvaluator) Created in NX12.0.0 |
interface |
PlcVendorSymbolBuilder
Represents a Subnet creation class Builder
To create a new instance of this class, use AMEManager.createPlcVendorSymbolBuilder(nxopen.Part, nxopen.NXObject) Created in NX12.0.0 |
interface |
PortBuilder
builder for the software block properties dialog
To create a new instance of this class, use AMEManager.createPortBuilder(nxopen.Part, nxopen.NXObject, nxopen.NXObject) Created in NX11.0.0 |
interface |
PortConnectionBuilder
builder for the port connector dialog
To create a new instance of this class, use AMEManager.createPortConnectionBuilder(nxopen.Part, nxopen.NXObject) Created in NX11.0.0 |
interface |
PortEvaluatorBuilder
Evaluates the port objects for the given port and a starting point
To create a new instance of this class, use AMEManager.createPortEvaluatorBuilder(nxopen.Part, nxopen.ame.ExpressionEvaluator) Created in NX12.0.0 |
interface |
PortsManagerBuilder
Provides journal methods for the ports manager dialog.
|
interface |
ProductMatchingRulesBuilder
Represents Product Matching Rules class builder
To create a new instance of this class, use AMEManager.createProductMatchingRulesBuilder(nxopen.Part) Created in NX11.0.0 |
interface |
ProductSelectionBuilder
JA class for Product Selection dialog
To create a new instance of this class, use AMEManager.createProductSelectionBuilder(nxopen.Part) Default values. |
interface |
ProductSelectionDetailsBuilder
Represents a Product Selection Details class Builder
To create a new instance of this class, use AMEManager.createProductSelectionDetailsBuilder(nxopen.Part) Created in NX11.0.0 |
interface |
ProjectEngineeringObjectBuilder
JA class for the insert Project Eng object dialog
To create a new instance of this class, use AMEManager.createProjectEngineeringObjectBuilder(nxopen.Part) Created in NX11.0.0 |
interface |
PropertyEvaluatorBuilder
Evaluates the property of an object given a category and property
To create a new instance of this class, use AMEManager.createPropertyEvaluatorBuilder(nxopen.Part, nxopen.ame.ExpressionEvaluator) Created in NX12.0.0 |
interface |
QueryBuilder
Represents query class builder
To create a new instance of this class, use AMEManager.createQueryBuilder(nxopen.Part) Created in NX11.0.0 |
interface |
ReportsSettingsBuilder
interface for the ReportsSettingsBuilder
To create a new instance of this class, use AMEManager.createReportsSettingsBuilder(nxopen.Part) Created in NX11.0.0 |
interface |
ReportTemplateBuilder
Class to create Report Template and assign the ReportQuery and Report Layout to them
To create a new instance of this class, use AMEManager.createReportTemplateBuilder(nxopen.Part) Created in NX11.0.0 |
interface |
SaveToLibraryBuilder
Create Software Block JA class
To create a new instance of this class, use AMEManager.createSaveToLibraryBuilder(nxopen.Part) Created in NX11.0.0 |
interface |
SchematicSymbolConfigurationBuilder
JA class for SchematicSymbolConfigurationBuilder dialog
To create a new instance of this class, use AMEManager.createSchematicSymbolConfigurationBuilder(nxopen.Part) Created in NX11.0.0 |
interface |
SelectAndHighlightBuilder
Represents a
SelectAndHighlightBuilder for select and highlight in the Navigators
To create a new instance of this class, use AMEManager.selectAndHighlightBuilder(nxopen.Part) Created in NX11.0.0 |
interface |
SelectBaseDefinitionNodeBuilder
Builder for selecting base definition node from navigators
This object does not need a creator . |
interface |
SelectClassificationFromTreeBuilder
Select Type from the Classification Library
This object does not need a creator. |
interface |
SelectMountingInterfaceLocationBuilder
Builder for selecting mounting interface location from graphics window
This object does not need a creator . |
interface |
ShowHideObjectsBuilder
JA class for ShowHideObjectsBuilder
To create a new instance of this class, use AMEManager.createShowHideObjectsBuilder(nxopen.Part) Created in NX11.0.0 |
interface |
Snap3DModelsBuilder
Represents a Snap3DModelsBuilder class Builder
To create a new instance of this class, use AMEManager.createSnap3dmodelsBuilder(nxopen.Part) Created in NX12.0.0 |
interface |
SubnetBuilder
Represents a Subnet creation class Builder
To create a new instance of this class, use AMEManager.createSubnetBuilder(nxopen.Part) Created in NX12.0.0 |
interface |
SymbolAnnotationBuilder
Represents a Symbol Annotation creation class Builder
To create a new instance of this class, use AMEManager.createSymbolAnnotationBuilder(nxopen.Part) Created in NX12.0.0 |
interface |
SymbolAnnotationSettingsBuilder
JA class for the symbol settings
To create a new instance of this class, use AMEManager.createSymbolAnnotationSettingsBuilder(nxopen.Part) Created in NX12.0.0 |
interface |
SymbolAuthoringBuilder
Represents a Symbol Authoring class Builder
To create a new instance of this class, use AMEManager.createSymbolAuthoringBuilder(nxopen.Part) Default values. |
interface |
TCSavedQueriesBuilder
Represents a TC Saved Queries builder
To create a new instance of this class, use AMEManager.createEditQueryScopeBuilder(nxopen.Part, nxopen.ame.AMEQuery, nxopen.ame.QueryClause) Created in NX11.0.0 |
interface |
TeeJunctionBuilder
JA class for creating Tee Junction
To create a new instance of this class, use AMEManager.createTeeJunctionBuilder(nxopen.Part) Created in NX12.0.0 |
interface |
TiaPortalProjectSettingsBuilder
TiaPortalProjectSettingsBuilder
To create a new instance of this class, use AMEManager.createTiaPortalProjectSettingsBuilder(nxopen.Part) Created in NX12.0.0 |
interface |
TiaProjectItemBuilder
the TIA project item builder
To create a new instance of this class, use AMEManager.createTiaprojectItemBuilder(nxopen.Part) Created in NX11.0.0 |
interface |
TransferFileDataBuilder
Imports a new one or updates the existing configuration in AD Upstream Data Navigator from the external file.
|
interface |
TypeMappingBuilder
JA class for the type mapping dialog
this is a block . |
interface |
TypeMappingListBuilder
Type Mapping List Builder
To create a new instance of this class, use AMEManager.createTypeMappingListBuilder(nxopen.Part) Created in NX11.0.0 |
interface |
UnloadLineDesignerBuilder
JA class for the insert UnloadLineDesigner dialog
To create a new instance of this class, use AMEManager.createUnloadLineDesignerBuilder(nxopen.Part) Created in NX11.0.0 |
Modifier and Type | Interface and Description |
---|---|
interface |
AbsolutePositionBuilder
Represents a builder class that absolutely positions the specified objects.
|
interface |
AddComponentBuilder
Represents a builder class that performs add existing component operation in current context.
|
interface |
AssembliesGeneralPropertiesBuilder
Represents an
AssembliesGeneralPropertiesBuilder to be used for changing the
general properties of a component. |
interface |
AssembliesParameterPropertiesBuilder
Represents an
AssembliesParameterPropertiesBuilder to be used for changing the
name or modifying the positioning mixture status of a component. |
interface |
AttributeSearchTermBuilder
An AttributeSearchTermBuilder is used to create or edit an
AttributeSearchTerm . |
interface |
BoxSearchTermBuilder
A BoxSearchTermBuilder is used to create or edit an
BoxSearchTerm . |
interface |
ClearanceAnalysisBuilder
Represents
ClearanceAnalysisBuilder . |
interface |
ComponentPatternBuilder
Represents a builder class that performs various
ComponentPattern operations. |
interface |
ConstraintDisplayBuilder
The
ConstraintDisplayBuilder can be used to control visibility
of constraints and optionally components. |
interface |
CopyDesignElementBuilder
Represents a builder class that performs copying design element operation in 4GD.
|
interface |
CreateComponentBuilder
Represents a
CreateComponentBuilder builder class. |
interface |
CreateNewComponentBuilder
Represents a
CreateNewComponentBuilder builder class. |
interface |
CreateOverridePartBuilder
Represents a builder class that creates empty override part in the specified design elements.
|
interface |
DeleteOverridePartBuilder
Represents a builder class that deletes override part in the specified design elements.
|
interface |
DesignElementBuilder
Represents a builder class that performs various design element operations.
|
interface |
HideComponentBuilder
Represents a
HideComponentBuilder To create a new instance of this class, use AssemblyManager.createHideComponentBuilder() Created in NX6.0.0 |
interface |
LoadInterpartDataBuilder
Represents a builder
LoadInterpartDataBuilder To create a new instance of this class, use AssemblyManager.createLoadInterpartDataBuilder() Default values. |
interface |
MakeUniquePartBuilder
Represents a
MakeUniquePartBuilder builder. |
interface |
MechanicalRoutingSubsetBuilder
A MechanicalRoutingSubsetBuilder is used to create/edit Subsets
Subset
that are used to define the context needed to perform a Mechanical Routing Design activity. |
interface |
PlaneSearchTermBuilder
A PlaneSearchTermBuilder is used to create or edit an
PlaneSearchTerm . |
interface |
PositioningGroupBuilder
Represents builder class for positioning group which is used to store constraints for design element.
|
interface |
PositioningTaskBuilder
Represents the class for positioning task builder
To create a new instance of this class, use SubsetCollection.createPositioningTaskBuilder(nxopen.assemblies.PositioningTask) Created in NX10.0.0 |
interface |
ProductOutlineBuilder
Represents a builder
ProductOutlineBuilder . |
interface |
ProximitySearchTermBuilder
A ProximitySearchTermBuilder is used to create or edit an
BoxSearchTerm . |
interface |
RelinkerBuilder
Represents a
RelinkerBuilder
To create a new instance of this class, use RelinkerCollection.createBuilder() Created in NX5.0.0 |
interface |
ReplaceComponentBuilder
Represents a
ReplaceComponentBuilder builder. |
interface |
RunContentProximitySearchTermBuilder
A RunContentProximitySearchTermBuilder is used to create or edit an
RunContentProximitySearchTerm . |
interface |
SearchTermBuilder
A SearchTermBuilder is used to create or edit an
SearchTerm . |
interface |
ShowComponentBuilder
Represents a
ShowComponentBuilder To create a new instance of this class, use AssemblyManager.createShowComponentBuilder() Created in NX6.0.0 |
interface |
SubsetBuilder
A SubsetBuilder is used to create or edit an
Subset . |
interface |
UpdateDesignElementPositionBuilder
Represents the builder class that updates positions of the DE's(Shape/Reuse) or Subordinates with override that are out of date.
|
interface |
UpdateStructureBuilder
Represents a builder
UpdateStructureBuilder . |
Modifier and Type | Interface and Description |
---|---|
interface |
ObjectBuilder
Represents a Product Interface Object Builder.
|
interface |
PropertyBuilder
Represents a
PropertyBuilder builder To create a new instance of this class, use Collection.createPropertyBuilder() Created in NX9.0.0 |
Modifier and Type | Interface and Description |
---|---|
interface |
OnestepUnformBuilder
Represents a
OnestepUnformBuilder . |
Modifier and Type | Interface and Description |
---|---|
interface |
AdaptivityExclusionZoneBuilder
Builds a
AdaptivityExclusionZone object which
represets adaptivity meta solution related exclusion zones. |
interface |
AdaptivityMetaSolutionBuilder
Builds a
AdaptivityMetaSolution object which
represets a recipe for generating adaptive remesh. |
interface |
AlternateFemRepresentationSourceBuilder
Represents a
AlternateFemRepresentationSourceBuilder
which can be used to create FemDataSets. |
interface |
AssignNodalCSBuilder
Represents a
AssignNodalCSBuilder
To create a new instance of this class, use NodeElementInfoManager.createAssignNodalCsBuilder() Default values. |
interface |
AttachElementsBuilder
Represents a
AttachElementsBuilder
To create a new instance of this class, use NodeElementManager.createAttachElementsBuilder() Created in NX11.0.0 |
interface |
AtvSetBuilder
Represents a
AtvSetBuilder
which can be used to create ATVSets. |
interface |
AutoBCBuilder
Builds one or more
SimSimulationObject object(s). |
interface |
AutoCyclicSymmetryPairsBuilder
Builds a
AutoPairs object which represents
a recipe for generating face pairs from a selected set of faces in the
model. |
interface |
AutoHealGeometryBuilder
Builder for creating Auto Heal Geometry
To create a new instance of this class, use AbstractionManager.createAutoHealGeometryBuilder() Default values. |
interface |
AutoMacViewerBuilder
Represents the correlation pairing viewer builder
To create a new instance of this class, use PreTestSolutionCollection.createAutoMacViewerBuilder(nxopen.TaggedObject) Created in NX6.0.0 |
interface |
AutomaticMorphBuilder
Represents a
AutomaticMorphBuilder To create a new instance of this class, use NodeElementManager.createAutomaticMorphBuilder() Created in NX9.0.0 |
interface |
AutomaticSweepBetweenSelection
Deprecated.
Deprecated in NX10.0.0. Use
Mesh3dHexBuilder .
|
interface |
AutoPairsBuilder
Builds a
AutoPairs object which
represets a recipe for generating face pairs from a selected set of faces
or solids in the model whose distance is less than a specified tolerance. |
interface |
BcLabelManagerBuilder
Represents a
BcLabelManagerBuilder builder
which can be used to renumber SimBC
id. |
interface |
BCSelectionDisplayBuilder
This class provides BC Selection Visual Display support, use this class to get the
BC types in current solution, adds special BCs to list, and display the BC's selection
geometry with the BC's color to do visually check
To create a new instance of this class, use SimSimulation.createBcSelectionDisplayBuilder() Default values. |
interface |
BeamEADBuilder
This class provides Beam/Bar Associated Data Support
To create a new instance of this class, use NodeElementManager.createBeamEadBuilder() Default values. |
interface |
BoltBuilder
Represents a
BoltBuilder
To create a new instance of this class, use BoltCollection.createBoltBuilder(nxopen.cae.Bolt) Created in NX7.5.0 |
interface |
BushingEADBuilder
This class provides Bushing Associated Data Support
To create a new instance of this class, use NodeElementManager.createBushingEadBuilder() Created in NX7.5.0 |
interface |
CAEConnectionBuilder
Represents a
CAEConnectionBuilder which can be used to create
1D connections. |
interface |
CaeNoteBuilder
Represents a CAE note builder class
To create a new instance of this class, use NoteManager.createCaeNoteBuilder(nxopen.annotations.SimpleDraftingAid) Created in NX12.0.0 |
interface |
CaeRegionBuilder
Represents a
CaeRegionBuilder builder To create a new instance of this class, use SimSimulation.createCaeRegionBuilder(java.lang.String, nxopen.cae.CaeRegion) Created in NX7.0.0 |
interface |
CAEWeldConnectionBuilder
Builder for creating 1D Weld Connection
To create a new instance of this class, use CAEConnectionCollection.createWeldConnectionBuilder(nxopen.cae.CAEWeldConnection) Created in NX6.0.0 |
interface |
CfdAutoRefinementConstraintBuilder
Represents a
CfdAutoRefinementConstraint builder To create a new instance of this class, use CfdAutoRefinementConstraintCollection.createBuilder(nxopen.TaggedObject) Created in NX11.0.0 |
interface |
CfdContactPreventionConstraintBuilder
Represents a
CfdContactPreventionConstraint builder To create a new instance of this class, use CfdContactPreventionConstraintCollection.createBuilder(nxopen.TaggedObject) Created in NX9.0.0 |
interface |
CfdLocalResolutionConstraintBuilder
Represents a
CfdLocalResolutionConstraint builder To create a new instance of this class, use CfdLocalResolutionConstraintCollection.createBuilder(nxopen.TaggedObject) Created in NX9.0.0 |
interface |
CircularImprintBuilder
Builder for creating Circular Imprint
To create a new instance of this class, use AbstractionManager.createCircularImprintBuilder() Created in NX7.5.0 |
interface |
ComacViewerBuilder
Represents the correlation MAC matrix viewer builder
To create a new instance of this class, use CorrelSolutionCollection.createComacViewerBuilder() Created in NX6.0.0 |
interface |
CombineTrisBuilder
Builder for creating Combine Tris
To create a new instance of this class, use NodeElementManager.createCombineTrisBuilder() Created in NX7.0.0 |
interface |
CompanionResultBuilder
Represents a
CompanionResult builder and can
be used to create or edit an CompanionResult To create a new instance of this class, use CompanionResultCollection.createCompanionResultBuilder(nxopen.cae.CompanionResult) Default values. |
interface |
ConflictResolutionBuilder
Represents a
ConflictResolutionBuilder builder which can resolve conflicts between the two input BCs by a specified rule To create a new instance of this class, use SimSolution.createConflictResolutionBuilder(nxopen.cae.SimGroupContainer, nxopen.cae.SimBC, nxopen.cae.SimBC) Created in NX10.0.0 |
interface |
ConstraintResolutionBuilder
Deprecated.
Deprecated in NX10.0.0. Use
ConflictResolutionBuilder instead.
|
interface |
ContactMeshBuilder
Represents a
ContactMeshBuilder
To create a new instance of this class, use MeshManager.createContactMeshBuilder(nxopen.cae.Mesh1d) Created in NX10.0.0 |
interface |
ConvertToConvergentBodyBuilder
Builder for creating a convergent body from CAE.CAEBody
To create a new instance of this class, use CaePart.createConvertToConvergentBodyBuilder() Created in NX12.0.0 |
interface |
ConvexMeshBuilder
Represents a
ConvexMeshBuilder
To create a new instance of this class, use NodeElementManager.createConvexMeshBuilder(nxopen.cae.RecipeConvexMesh) Default values. |
interface |
CorrelAlignmentBuilder
This builder is used to control the alignment parameters of a
CorrelSolution To create a new instance of this class, use SimSolution.createAlignmentBuilder() Created in NX6.0.1 |
interface |
CorrelApplyAlignmentFromBuilder
This builder is used to apply the alignment matrix read from selected xml file to the test model
To create a new instance of this class, use CorrelManager.createCorrelApplyAlignmentFromBuilder(nxopen.cae.SimSolution) Created in NX9.0.0 |
interface |
CorrelBaseBuilder
Represents the abstract builder class for all objects defined in correl meta solution
This is an abstract class, and cannot be created. |
interface |
CorrelFineTuneAlignmentBuilder
This builder is used to nudge the alignment by a fine adjustment
To create a new instance of this class, use CorrelManager.createCorrelFineTuneAlignmentBuilder(nxopen.cae.SimSolution) Created in NX9.0.0 |
interface |
CorrelModePairingBuilder
This builder is used to control the mode pairing behavior of a
CorrelSolution To create a new instance of this class, use CorrelSolution.createModePairingBuilder() Created in NX6.0.1 |
interface |
CorrelSolutionBuilder
This is a manager to the
CorrelSolution class. |
interface |
CreateJtBuilder
|
interface |
DamperEADBuilder
This class provides Damper Associated Data Support
To create a new instance of this class, use NodeElementManager.createDamperEadBuilder() Default values. |
interface |
DataProcessingBlockBuilder
Builds a
DataProcessingBlock object which
represets a data processing block. |
interface |
DataProcessingBuilder
Builds a
DataProcessing object which
represets a data processing meta solution. |
interface |
DataSourceBuilder
Represents a
DataSourceBuilder
which can be used to create scenario data sources. |
interface |
DeletePolygonFaceBuilder
Builder for Delete Polygon Face
To create a new instance of this class, use AbstractionManager.createDeletePolygonFaceBuilder() Created in NX8.5.0 |
interface |
DependentMeshBuilder
Represents a
Mesh2d
To create a new instance of this class, use MeshManager.createDependentMeshBuilder(nxopen.cae.DependentMesh) Created in NX5.0.0 |
interface |
DisplayNodalCsysBuilder
Represents a
DisplayNodalCsysBuilder . |
interface |
DurabilityDamageEvaluationBuilder
Represents the builder for evaluating durability damage.
|
interface |
DurabilityEvaluateFatigueHistoryBuilder
Represents the builder for evaluating fatigue histories.
|
interface |
DurabilityEventBuilder
Represents the abstract builder class for all durability events.
|
interface |
DurabilityEventFatigueSettingsBuilder
Represents a builder class for the event fatigue settings.
|
interface |
DurabilityEventOverridesBuilder
Represents a builder class for Event Overrides.
|
interface |
DurabilityEventSolverBuilder
Represents the builder for solving the durability event.
|
interface |
DurabilityEventStrengthSettingsBuilder
Represents a builder class for the event strength settings.
|
interface |
DurabilityExcitationBuilder
Represents the abstract builder class for all durability excitations.
|
interface |
DurabilityFunctionExcitationBuilder
Represents a
DurabilityFunctionExcitation builder. |
interface |
DurabilityLoadPatternBuilder
Represents a
DurabilityLoadPattern builder. |
interface |
DurabilityMetaSolutionBuilder
Represents a
DurabilityMetaSolution builder. |
interface |
DurabilityRandomEventBuilder
Represents the builder for the random durability event.
|
interface |
DurabilityRandomFatigueBuilder
Represents a builder class for the event fatigue settings.
|
interface |
DurabilityResultPathBuilder
Represents a
DurabilityResultPath builder. |
interface |
DurabilityResultsReportBuilder
Represents the builder for reporting the durability results.
|
interface |
DurabilitySolverBuilder
Represents the builder for solving the durability solution process.
|
interface |
DurabilityStaticEventBuilder
Represents the builder for the static durability event.
|
interface |
DurabilityStrainGageAnalyzerBuilder
Represents the builder for analyzing strain gage data.
|
interface |
DurabilityStressAxesBuilder
Represents a builder class for the event fatigue settings.
|
interface |
DurabilityTransientEventBuilder
Represents the builder for the transient durability event.
|
interface |
DurSpecialistAnalysisTypeBuilder
CAE.DurSpecialistAnalsisTypeBuilder
To create a new instance of this class, use DurSpecialistAnalysisTypeCollection.createAnalysisTypeBuilder(nxopen.cae.DurSpecialistAnalysisType) Created in NX12.0.0 NX_REMOVE_FROM_JAVA_API |
interface |
DurSpecialistBlockLoadEventBuilder
Represents a
DurSpecialistBlockLoadEvent builder. |
interface |
DurSpecialistLoadLengthBuilder
Represents a
DurSpecialistLoadLength builder. |
interface |
DurSpecialistLoadProviderBuilder
Represents a
DurSpecialistLoadProvider builder. |
interface |
DurSpecialistLocalDefinitionBuilder
Represents a
DurSpecialistLocalDefinition builder. |
interface |
DurSpecialistLocalDefinitionByGroupBuilder
Wizard for creating
DurSpecialistLocalDefinition from groups
To create a new instance of this class, use DurSpecialistLocalDefinitionCollection.createLocalDefinitionByGroupBuilder() Created in NX12.0.0 NX_REMOVE_FROM_JAVA_API |
interface |
DurSpecialistSolutionBuilder
Represents a
DurSpecialistSolution builder. |
interface |
DurSpecialistSuperpositionEventBuilder
Represents a
DurSpecialistSuperpositionEvent builder. |
interface |
EdgeFaceImprintBuilder
Builder for creating Face Face Imprint
To create a new instance of this class, use AbstractionManager.createEdgeFaceImprintBuilder() Created in NX11.0.0 |
interface |
EdgeSticherBuilder
Represents a
EdgeSticherBuilder To create a new instance of this class, use FemPart.createEdgeSticherBuilder() Default values. |
interface |
ElementConnectivityBuilder
Represents a
ElementConnectivityBuilder
To create a new instance of this class, use NodeElementManager.createElementConnectivityBuilder() Created in NX5.0.0 |
interface |
ElementCreateBuilder
Represents a
ElementCreateBuilder which allows you to manually create elements from existing nodes. |
interface |
ElementDeleteBuilder
Represents a
ElementDeleteBuilder
To create a new instance of this class, use NodeElementManager.createDeleteElementBuilder() Created in NX5.0.0 |
interface |
ElementDetachBuilder
Represents a
ElementDetachBuilder
To create a new instance of this class, use NodeElementManager.createElementDetachBuilder() Created in NX11.0.0 |
interface |
ElementExtractBuilder
Builder for creating Element Extract
To create a new instance of this class, use NodeElementManager.createElementExtractBuilder() Created in NX7.5.0 |
interface |
ElementExtrudeBuilder
Represents a
ElementExtrudeBuilder
To create a new instance of this class, use NodeElementManager.createElementExtrudeBuilder() Created in NX5.0.0 |
interface |
ElementModifyLabelBuilder
Represents a
ElementModifyLabelBuilder
To create a new instance of this class, use NodeElementManager.createElementModifyLabelBuilder() Created in NX5.0.0 |
interface |
ElementModifyOrderBuilder
Represents a
ElementModifyOrderBuilder
To create a new instance of this class, use NodeElementManager.createElementModifyOrderBuilder() Created in NX6.0.1 |
interface |
ElementModifyTypeBuilder
Represents a
ElementModifyTypeBuilder
To create a new instance of this class, use NodeElementManager.createElementModifyTypeBuilder() Created in NX8.5.0 |
interface |
ElementProjectBuilder
Represents a
ElementProjectBuilder
To create a new instance of this class, use NodeElementManager.createElementProjectBuilder() Created in NX5.0.0 |
interface |
ElementReflectBuilder
Represents a
ElementReflectBuilder
To create a new instance of this class, use NodeElementManager.createElementReflectBuilder() Created in NX5.0.0 |
interface |
ElementRevolveBuilder
Represents a
ElementRevolveBuilder
To create a new instance of this class, use NodeElementManager.createElementRevolveBuilder() Created in NX5.0.0 |
interface |
ElementRotateBuilder
Represents a
ElementRotateBuilder
To create a new instance of this class, use NodeElementManager.createElementRotateBuilder() Created in NX12.0.0 |
interface |
ElementSplitBuilder
Represents a
ElementSplitBuilder
To create a new instance of this class, use NodeElementManager.createElementSplitBuilder() Created in NX5.0.0 |
interface |
ElementTranslateBuilder
Represents a
ElementTranslateBuilder
To create a new instance of this class, use NodeElementManager.createElementTranslateBuilder() Created in NX5.0.0 |
interface |
FaceFaceImprintBuilder
Builder for creating Face Face Imprint
To create a new instance of this class, use AbstractionManager.createFaceFaceImprintBuilder() Created in NX11.0.0 |
interface |
FaceFromBoundaryBuilder
Builder for creating Polygon Face by boundary
To create a new instance of this class, use AbstractionManager.createFaceFromBoundaryBuilder() Created in NX8.5.0 |
interface |
FlatPatternsBuilder
Represents a Flat Patterns Builder.
|
interface |
FluidDomainBuilder
Represents a
FluidDomainRecipe
To create a new instance of this class, use FluidDomainCollection.createBuilder(nxopen.cae.FluidDomainRecipe) Created in NX7.5.2 |
interface |
FreeBodyResultsBuilder
Represents a
FreeBodyResultsBuilder To obtain an instance of this class use Session.resultManager() . |
interface |
FreezeGeometryBuilder
Builder for creating Freeze Geometry
To create a new instance of this class, use GeometryRecipeCollection.createFreezeGeometryBuilder(nxopen.cae.FreezeGeometryRecipe) Created in NX10.0.0 |
interface |
FrfSetBuilder
Represents a
FrfSetBuilder
which can be used to create FrfSets. |
interface |
FunctionBuilder
This builder class is used to create or edit
Function objects. |
interface |
GapEADBuilder
This class provides Gap Associated Data Support
To create a new instance of this class, use NodeElementManager.createGapEadBuilder() Created in NX7.5.0 |
interface |
GeneralGeometryBeamSectionBuilder
Represents a
GeneralGeometryBeamSectionBuilder
To create a new instance of this class, use BeamSectionCollection.createGeneralGeometryBeamSectionBuilder(nxopen.cae.GeneralGeometryBeamSection) Created in NX7.5.0 |
interface |
GlobalLayupImportFromPptBuilder
Represents a Global Layup IMport From Ppt Builder.
|
interface |
GraphFromResultProbeBuilder
Represents a
GraphFromResultProbeBuilder
This is an abstract class and cannot be instantiated Created in NX11.0.0 |
interface |
GroupByBoundaryBuilder
Represents a
GroupByBoundaryBuilder . |
interface |
IBeamSectionBuilder
|
interface |
ImportedSolutionBuilder
Represents a
ImportedSolutionBuilder builder To create a new instance of this class, use SimSimulation.createImportedSolutionBuilder() Created in NX11.0.0 |
interface |
ImportSimulationBuilder
Represents
ImportSimulationBuilder
To create a new instance of this class, use SimPart.createImportSimBuilder() Created in NX11.0.0 |
interface |
ImprintBuilder
Builder for creating Imprint
To create a new instance of this class, use AbstractionManager.createImprintBuilder() Created in NX11.0.0 |
interface |
InterpolationEADBuilder
This class provides Interpolation Associated Data Support
To create a new instance of this class, use NodeElementManager.createInterpolationEadBuilder(nxopen.cae.FEElement) Created in NX11.0.0 |
interface |
LaminateDampingFactorBuilder
The builder for the damping factor.
|
interface |
LaminateDrapingDataBuilder
Represents a
LaminateDrapingData builder To create a new instance of this class, use LaminatePly.createDrapingDataBuilder() Created in NX6.0.0 |
interface |
LaminateDrapingExtensionBuilder
Builder class for
LaminateDrapingExtension To create a new instance of this class, use LaminatePly.createDrapingExtensionBuilder() Created in NX8.5.0 |
interface |
LaminateDynamicEventBuilder
Represents a
LaminateDynamicEvent builder This is an abstract class. |
interface |
LaminateDynamicSimBuilder
Represents a
LaminateDynamicSim builder To create a new instance of this class, use LaminateDynamicSimCollection.createDynamicSimBuilder(nxopen.cae.LaminateDynamicSim) Created in NX9.0.0 |
interface |
LaminateElementFilterBuilder
Represents a
LaminateGraphicalReport builder There is no kf creator. |
interface |
LaminateExtrudeSetupBuilder
Represents a
LaminateExtrudeSetup builder To create a new instance of this class, use LaminateGlobalLayupMgr.createLaminateExtrudeSetupBuilder(nxopen.cae.LaminateExtrudeSetup) Default values. |
interface |
LaminateFiberOrientationOptionsBuilder
Represents a
LaminateFiberOrientationOptions builder To create a new instance of this class, use LaminateGlobalLayup.createFiberOrientationOptionsBuilder() Created in NX7.5.0 |
interface |
LaminateFillSetupBuilder
Represents a
LaminateFillSetupBuilder builder To create a new instance of this class, use LaminateGlobalLayupMgr.createLaminateFillSetupBuilder(nxopen.cae.LaminateExtrudeSetup) Created in NX7.5.2 |
interface |
LaminateGraphicalReportBuilder
Represents a
LaminateGraphicalReport builder There is no kf creator. |
interface |
LaminateImportedLayupBuilder
Represents a
LaminateImportedLayupBuilder builder To create a new instance of this class, use LaminateGlobalLayupMgr.createLaminateImportedLayupBuilder(nxopen.cae.LaminateGlobalLayup) Default values. |
interface |
LaminateImportZonesBuilder
Represents a
LaminateImportZonesBuilder builder To create a new instance of this class, use LaminateGlobalLayupMgr.createLaminateImportZonesBuilder() Created in NX10.0.0 |
interface |
LaminateLayupOffsetBuilder
Represents a
LaminateLayupOffset builder To create a new instance of this class, use LaminateGlobalLayupMgr.createLayupOffsetBuilder(nxopen.cae.LaminateLayupOffset) Created in NX7.5.0 |
interface |
LaminateLockAngleBuilder
Represents a builder
To create a new instance of this class, use LaminateGlobalLayup.createLockAngleBuilder() Created in NX7.5.0 |
interface |
LaminateMatOrientationBuilder
Represents a
LaminateMatOrientation builder To create a new instance of this class, use LaminateGlobalLayupMgr.createLaminateMatOrientationBuilder(nxopen.cae.LaminateMatOrientation) Created in NX7.5.0 |
interface |
LaminatePlyFilterBuilder
Represents a
LaminatePlyFilterBuilder There is no kf creator. |
interface |
LaminatePlyMaxThicknessVarBuilder
Builder used to modify the ply maximum accepted thickness variation for laminate fill
To create a new instance of this class, use LaminatePly.createLaminatePlyMaxThicknessVarBuilder() Created in NX8.5.0 |
interface |
LaminatePostReportBuilder
Represents a
LaminatePostReport builder There is no kf creator. |
interface |
LaminateQuickReportBuilder
Represents a
LaminateQuickReport builder There is no kf creator. |
interface |
LaminateRandomEventBuilder
Represents a
LaminateRandomEvent builder To create a new instance of this class, use LaminateDynamicEventCollection.createRandomEventBuilder(nxopen.cae.LaminateRandomEvent) Created in NX9.0.0 |
interface |
LaminateRelabelPliesBuilder
Represents a
LaminateDynamicEvent builder To create a new instance of this class, use LaminateGlobalLayupMgr.createRelabelPliesBuilder() Created in NX10.0.0 |
interface |
LaminateSelectEntitiesBuilder
Represents a
LaminateSelectEntitiesBuilder To create a new instance of this class, use LaminateGlobalLayupMgr.createLaminateSelectEntitiesBuilder() Created in NX7.5.2 |
interface |
LaminateSineEventBuilder
Represents a
LaminateSineEvent builder To create a new instance of this class, use LaminateDynamicEventCollection.createSineEventBuilder(nxopen.cae.LaminateSineEvent) Created in NX10.0.0 |
interface |
LaminateSpreadsheetReportBuilder
Represents a
LaminateSpreadsheetReport builder There is no kf creator. |
interface |
LaminateViewDrapingResultsBuilder
Represents the builder for the draping results viewer
To create a new instance of this class, use LaminateGlobalLayupMgr.createViewDrapingResultsBuilder(nxopen.cae.LaminateGlobalLayup, nxopen.cae.LaminatePly) Created in NX6.0.0 |
interface |
LayoutStateApplicator
Represents a
LayoutStateApplicator
which can be used to visualize a layout state. |
interface |
LayoutStateBuilder
Represents a
LayoutStateBuilder
which can be used to create layout states. |
interface |
LbcAssociationMgr
|
interface |
LocalRemeshBuilder
Represents a
LocalRemeshBuilder
To create a new instance of this class, use MeshManager.createLocalRemeshBuilder() Default values. |
interface |
LumpedMassEADBuilder
This class provides LumpedMass Associated Data Support
To create a new instance of this class, use NodeElementManager.createLumpedMassEadBuilder() Default values. |
interface |
ManualMorphBuilder
Represents a
ManualMorphBuilder To create a new instance of this class, use NodeElementManager.createManualMorphBuilder() Created in NX9.0.0 |
interface |
ManualNodeAssociationBuilder
Represents a
ManualNodeAssociationBuilder
To create a new instance of this class, use NodeElementManager.createManualNodeAssociationBuilder() Created in NX10.0.0 |
interface |
ManualSweepBetweenSelection
Deprecated.
Deprecated in NX10.0.0. Use
Mesh3dHexBuilder .
|
interface |
MappedMeshBuilder
Represents a Mapped Mesh Builder.
|
interface |
MechanicalLoadSumBuilder
Represents a
MechanicalLoadSumBuilder
To create a new instance of this class, use ModelCheckManager.createMechanicalLoadSumBuilder() Created in NX5.0.1 |
interface |
MergeFaceBuilder
Builder for creating Merge Face
To create a new instance of this class, use AbstractionManager.createMergeFaceBuilder() Default values. |
interface |
Mesh0dBuilder
Represents 0D Mesh
Used to create a
Mesh0d
To create a new instance of this class, use MeshManager.createMesh0dBuilder(nxopen.cae.Mesh0d) Created in NX6.0.0 |
interface |
Mesh1dBuilder
Represents 1d Mesh
Used to create a
Mesh1d
To create a new instance of this class, use MeshManager.createMesh1dBuilder(nxopen.cae.Mesh1d) Created in NX6.0.0 |
interface |
Mesh2dBuilder
Represents 2D Mesh
Used to create a
Mesh2d
To create a new instance of this class, use MeshManager.createMesh2dBuilder(nxopen.cae.Mesh2d) Created in NX6.0.0 |
interface |
Mesh3dHexBuilder
Represents 3D Hex Mesh
Used to create a
SweptMesh
To create a new instance of this class, use MeshManager.createMesh3dHexBuilder(nxopen.cae.SweptMesh) Created in NX6.0.0 |
interface |
Mesh3dHybridBuilder
Represents 3D Mesh
Used to create a
Mesh3d
To create a new instance of this class, use MeshManager.createMesh3dHybridBuilder(nxopen.cae.Mesh) Created in NX11.0.0 |
interface |
Mesh3dTetBuilder
Represents 3D Mesh
Used to create a
Mesh3d
To create a new instance of this class, use MeshManager.createMesh3dTetBuilder(nxopen.cae.Mesh3d) Created in NX6.0.0 |
interface |
MeshCollectorBuilder
Represents a
MeshCollectorBuilder
To create a new instance of this class, use MeshManager.createCollectorBuilder(nxopen.cae.MeshCollector, java.lang.String) Created in NX5.0.0 |
interface |
MeshCollectorOccurrenceBuilder
Represents a
MeshCollectorOccurrenceBuilder
To create a new instance of this class, use MeshManagerOccurrence.createOccurrenceBuilder(nxopen.cae.MeshCollectorOccurrence) Created in NX5.0.0 |
interface |
MeshControlBuilder
Represents a
MeshControl
To create a new instance of this class, use MeshControlCollection.createBuilder(nxopen.cae.MeshControl) Default values. |
interface |
MeshControlDisplayOptionsBuilder
Represents a
MeshControlDisplayOptionsBuilder
To create a new instance of this class, use MeshControlDisplayManager.createBuilder() Created in NX5.0.0 |
interface |
MeshFromBoundaryBuilder
Represents a
MeshFromBoundaryBuilder
To create a new instance of this class, use NodeElementManager.createMeshFromBoundaryBuilder() Created in NX9.0.0 |
interface |
MeshPointBaseBuilder
Represents a
MeshPointBaseBuilder
This is an abstract class and cannot be directly instantiated Created in NX5.0.2 |
interface |
MeshPointConicCenterBuilder
Represents a
MeshPointConicCenterBuilder
To create a new instance of this class, use MeshPointCollection.createMeshpointConicCenterBuilder() Created in NX5.0.2 |
interface |
MeshPointExistingPointBuilder
Represents a
MeshPointExistingPointBuilder
To create a new instance of this class, use MeshPointCollection.createMeshpointExistingPointBuilder() Created in NX5.0.2 |
interface |
MeshPointInsideVolumeBuilder
Represents a
MeshPointInsideVolumeBuilder
To create a new instance of this class, use MeshPointCollection.createMeshpointInsideVolumeBuilder() Created in NX5.0.2 |
interface |
MeshPointMultipleOnCurveBuilder
Represents a
MeshPointMultipleOnCurveBuilder
To create a new instance of this class, use MeshPointCollection.createMeshpointMultipleOnCurveBuilder() Created in NX5.0.2 |
interface |
MeshPointOnCurveBuilder
Represents a
MeshPointOnCurveBuilder
To create a new instance of this class, use MeshPointCollection.createMeshpointOnCurveBuilder() Created in NX5.0.2 |
interface |
MeshPointOnFaceBuilder
Represents a
MeshPointOnFaceBuilder
To create a new instance of this class, use MeshPointCollection.createMeshpointOnFaceBuilder() Created in NX5.0.2 |
interface |
MeshPointProjectBuilder
Represents a
MeshPointProjectBuilder
To create a new instance of this class, use MeshPointCollection.createMeshpointProjectBuilder() Created in NX5.0.2 |
interface |
MeshRefinementBuilder
Represents Mesh Refinement
Used to create a
MeshRefinementBuilder
To create a new instance of this class, use MeshManager.createMeshRefinementBuilder() Created in NX11.0.0 |
interface |
MMCCreateBuilder
Represents a
MMCCreateBuilder which can be used to create or edit
MeshMate objects. |
interface |
ModelDisplayBuilder
This class provides Model Display Data Support
To create a new instance of this class, use CaePart.createModelDisplayBuilder() Default values. |
interface |
ModelUpdateCorrelMethodBuilder
Represents a
ModelUpdateCorrelMethodBuilder To create a new instance of this class, use ModelUpdateSolution.createCorrelMethodBuilder() Created in NX7.5.0 |
interface |
ModelUpdateDesignVariablesRapidCreateBuilder
This class is the builder that is used for the rapid creation of design variables.
|
interface |
ModelUpdateOptimOptionsBuilder
Represents a
ModelUpdateOptimOptionsBuilder To create a new instance of this class, use ModelUpdateSolution.createOptimOptionsBuilder() Created in NX7.5.0 |
interface |
ModelUpdateOptionsBuilder
Represents a
ModelUpdateOptionsBuilder To create a new instance of this class, use ModelUpdateSolution.createOptionsBuilder() Created in NX7.5.0 |
interface |
ModelUpdateOverallWeightsBuilder
Represents a
ModelUpdateOverallWeightsBuilder To create a new instance of this class, use ModelUpdateSolution.createOverallWeightsBuilder() Created in NX7.5.0 |
interface |
ModelUpdateSensitivityViewerBuilder
Represents
ModelUpdateSensitivityViewerBuilder To create a new instance of this class, use ModelUpdateSolutionCollection.createSensitivityViewerBuilder(nxopen.cae.ModelUpdateSolution) Created in NX6.0.0 |
interface |
ModelUpdateSolutionBuilder
Represents a
ModelUpdateSolutionBuilder To create a new instance of this class, use ModelUpdateSolutionCollection.createSolutionBuilder(nxopen.cae.ModelUpdateSolution) Created in NX7.5.0 |
interface |
ModeSetBuilder
Represents a
ModeSetBuilder
which can be used to create ModeSets. |
interface |
MorphRevolvedMeshBuilder
Represents a
MorphRevolvedMeshBuilder
To create a new instance of this class, use NodeElementManager.createMorphRevolvedMeshBuilder() Created in NX11.0.0 |
interface |
MoveNodeBuilder
Represents a
MoveNodeBuilder
To create a new instance of this class, use NodeElementManager.createMoveNodeBuilder() Created in NX12.0.0 |
interface |
MultipleElementCreateBuilder
Represents a
MultipleElementCreateBuilder which can be used to create
mutiple elements in one efficient opertation. |
interface |
MultipleNodeCreateBuilder
Represents a
MultipleNodeCreateBuilder which can be used to create
mutiple nodes in one efficient opertation. |
interface |
NodalForceReportBuilder
Nodal Force Report Builder
An instance of this class can not be obtained . |
interface |
NodeAlignBuilder
Represents a
NodeAlignBuilder
To create a new instance of this class, use NodeElementManager.createNodeAlignBuilder() Created in NX5.0.0 |
interface |
NodeAssociationBuilder
Represents a
NodeAssociationBuilder
To create a new instance of this class, use NodeElementManager.createNodeAssociationBuilder() Created in NX9.0.0 |
interface |
NodeCreateBuilder
Represents a
NodeCreateBuilder . |
interface |
NodeDeleteBuilder
Represents a
NodeDeleteBuilder
To create a new instance of this class, use NodeElementManager.createNodeDeleteBuilder() Created in NX5.0.0 |
interface |
NodeDissociationBuilder
Represents a
NodeDissociationBuilder
To create a new instance of this class, use NodeElementManager.createNodeDissociationBuilder() Created in NX9.0.0 |
interface |
NodeElementInfoBuilder
Represents a
NodeElementInfoBuilder
To create a new instance of this class, use NodeElementInfoManager.createNodeElementInfoBuilder() Created in NX5.0.0 |
interface |
NodeModifyLabelBuilder
Represents a
NodeModifyLabelBuilder
To create a new instance of this class, use NodeElementManager.createNodeModifyLabelBuilder() Created in NX5.0.0 |
interface |
NodeModifyLocationBuilder
Represents a
NodeModifyLocationBuilder
To create a new instance of this class, use NodeElementManager.createNodeModifyLocationBuilder() Created in NX5.0.0 |
interface |
NodeProjectBuilder
Represents a
NodeProjectBuilder
To create a new instance of this class, use NodeElementManager.createNodeProjectBuilder() Created in NX8.5.0 |
interface |
NodeReflectBuilder
Represents a
NodeReflectBuilder
To create a new instance of this class, use NodeElementManager.createNodeReflectBuilder() Created in NX5.0.0 |
interface |
NodeRotateBuilder
Represents a
NodeRotateBuilder
To create a new instance of this class, use NodeElementManager.createNodeRotateBuilder() Created in NX5.0.0 |
interface |
NodesBetweenNodesBuilder
Represents a
NodesBetweenNodesBuilder
To create a new instance of this class, use NodeElementManager.createNodesBetweenNodesBuilder() Created in NX5.0.0 |
interface |
NodesOnCurveBuilder
Represents a
NodesOnCurveBuilder
To create a new instance of this class, use NodeElementManager.createNodesOnCurveBuilder() Created in NX5.0.0 |
interface |
NodesRepositionBuilder
Represents a
NodesRepositionBuilder
To create a new instance of this class, use NodeElementManager.createNodesRepositionBuilder() Created in NX6.0.2 |
interface |
NodeTranslateBuilder
Represents a
NodeTranslateBuilder
To create a new instance of this class, use NodeElementManager.createNodeTranslateBuilder() Created in NX5.0.0 |
interface |
OneDimensionalElementSplitBuilder
Represents a
OneDimensionalElementSplitBuilder
To create a new instance of this class, use NodeElementManager.createOneDimensionalElementSplitBuilder() Created in NX8.5.0 |
interface |
OpenDuctMeshBuilder
Represents a
OpenDuctMeshBuilder
To create a new instance of this class, use NodeElementManager.createOpenDuctMeshBuilder(nxopen.cae.RecipeOpenDuctMesh) Created in NX12.0.0 |
interface |
PolygonFaceOnMeshBuilder
Builder for creating Polygon Face On Mesh
To create a new instance of this class, use AbstractionManager.createPolygonFaceOnMeshBuilder() Created in NX7.5.2 |
interface |
Post3DGraphBuilder
Represents a
Post3DGraphBuilder
This is an abstract class and cannot be instantiated Created in NX10.0.0 |
interface |
PostGraphAcrossIterationsBuilder
Represents a
PostGraphAcrossIterationsBuilder
This is an abstract class and cannot be instantiated Created in NX9.0.0 |
interface |
PostGraphAlongPathBuilder
Represents a
PostGraphAlongPathBuilder
This is an abstract class and cannot be instantiated Default values. |
interface |
PostGraphBuilder
Represents a
PostGraphBuilder
This is an abstract class and cannot be instantiated Created in NX9.0.0 |
interface |
PostGraphOrbitBuilder
Represents a
PostGraphOrbitBuilder
This is an abstract class and cannot be instantiated Created in NX9.0.0 |
interface |
PostJtExportBuilder
Represents a
PostJtExportBuilder used for exporting JTs of Result Types in Post Processing
To create a new instance of this class, use ResultManager.createPostJtBuilder() Created in NX8.5.0 |
interface |
PostProcessingSessionApplicator
Represents a
PostProcessingSessionApplicator
which can be used to visualize a post processing pession. |
interface |
PostScenarioBuilder
This class represents a
PostScenarioBuilder . |
interface |
PostScenarioBuilderSlot
This class represents a
PostScenarioBuilderSlot . |
interface |
PreTestDofSetBuilder
Represents a
PreTestDofSet builder To create a new instance of this class, use PreTestSolutionCollection.createPretestDofsetBuilder(nxopen.cae.PreTestDofSet) Created in NX7.5.0 |
interface |
PreTestExciterConfigBuilder
Represents a
PreTestExciterConfig builder To create a new instance of this class, use PreTestSolutionCollection.createExciterConfigBuilder(nxopen.cae.PreTestExciterConfig) Default values. |
interface |
PreTestExportUnvBuilder
This is a manager to the
PreTestExportUnvBuilder class. |
interface |
PreTestSensorConfigBuilder
Represents a
PreTestSensorConfig builder To create a new instance of this class, use PreTestSolutionCollection.createSensorConfigBuilder(nxopen.cae.PreTestSensorConfig) Default values. |
interface |
PreTestSolutionBuilder
Represents a
PreTestSolution builder To create a new instance of this class, use PreTestSolutionCollection.createPretestBuilder(nxopen.cae.PreTestSolution) Created in NX7.5.0 |
interface |
PrimitiveMeshBuilder
Represents Primitive Mesh
Used to create a
Mesh
To create a new instance of this class, use MeshManager.createPrimitiveMeshBuilder(nxopen.cae.Mesh) Created in NX7.5.1 |
interface |
PrimitiveRecipeMeshBuilder
Represents a Primitive Recipe Mesh
Used to create a
Mesh
To create a new instance of this class, use MeshManager.createPrimitiveRecipeMeshBuilder(nxopen.cae.PrimitiveRecipeMesh) Created in NX11.0.0 |
interface |
ProjectNodesToCadGeometryBuilder
Allows you to query the mesh nodes that are off the underlying Cad geometry by a given tolerance,
and if requested this builder can adjust the node locations to put them back on
to the underlying Cad geometry.
|
interface |
QueryCurveBuilder
Represents a
QueryCurveBuilder
To create a new instance of this class, use QueryCurveManager.createQueryCurveBuilder() Created in NX11.0.0 |
interface |
ReassignElementsBuilder
Represents a
ReassignElementsBuilder
To create a new instance of this class, use MeshManager.createReassignElementsBuilder() Created in NX5.0.0 |
interface |
RemoveRibsBuilder
Represents a
RemoveRibsBuilder
To create a new instance of this class, use NodeElementManager.createRemoveRibsBuilder() Default values. |
interface |
ResultProbeBuilder
Result probe Builder
An instance of this class can not be obtained Default values. |
interface |
ResultsCombinationBuilder
Represents a
ResultsCombinationBuilder To obtain an instance of this class use Session.resultManager() . |
interface |
ResultsEnvelopeBuilder
Represents a
ResultsEnvelopeBuilder To obtain an instance of this class use Session.resultManager() . |
interface |
ResultsManipulationBuilder
Represents an abstract
ResultsManipulationBuilder This is an abstract class and cannot be instantiated Created in NX7.5.2 |
interface |
ResultsModelExportBuilder
Represents a
ResultsModelExportBuilder To obtain an instance of this class use Session.resultManager() . |
interface |
ResultsReductionBuilder
Represents a
ResultsReductionBuilder To obtain an instance of this class use Session.resultManager() . |
interface |
RigidEADBuilder
This class provides Rigid Associated Data Support
To create a new instance of this class, use NodeElementManager.createRigidEadBuilder() Created in NX6.0.0 |
interface |
SelectElementsBuilder
Represents a
SelectElementsBuilder
To create a new instance of this class, use SelectElementsManager.createSelectElementsBuilder() Created in NX5.0.0 |
interface |
ShapeMetricViewerBuilder
Represents the correlation Shape metrics viewer builder
To create a new instance of this class, use CorrelSolutionCollection.createShapeMetricViewerBuilder(nxopen.cae.CorrelSolution) Created in NX7.5.0 |
interface |
Shell2SolidBuilder
Represents 3D Tet Mesh
Used to create a
Mesh3d
To create a new instance of this class, use MeshManager.createShell2solidBuilder(nxopen.cae.Mesh3d) Created in NX6.0.0 |
interface |
ShellEADBuilder
This class provides Shell Associated Data Support
To create a new instance of this class, use NodeElementManager.createShellEadBuilder() Default values. |
interface |
ShellTo3dHybridBuilder
Represents 3D Shell To Hybrid mesh
Used to create a
Mesh3d
To create a new instance of this class, use MeshManager.createShellto3dhybridBuilder(nxopen.cae.Mesh3d) Created in NX12.0.0 |
interface |
ShipMeshAutomationBuilder
Represents Ship Mesh Automation
Used to create a
ShipMeshAutomation
To create a new instance of this class, use MeshManager.createShipMeshAutomationBuilder(nxopen.cae.ShipMeshAutomation) Created in NX11.0.2 |
interface |
ShowAdjacentBuilder
Represents a
ShowAdjacentBuilder
To create a new instance of this class, use ShowHideManager.createShowAdjacentBuilder() Created in NX5.0.0 |
interface |
ShowHideBuilder
Represents a
ShowHideBuilder
To create a new instance of this class, use ShowHideManager.createShowHideBuilder() Created in NX5.0.0 |
interface |
ShowOnlyBuilder
Represents a
ShowOnlyBuilder
To create a new instance of this class, use ShowHideManager.createShowOnlyBuilder() Created in NX5.0.0 |
interface |
SimBcPlotContoursBuilder
Represents a
SimBcPlotContoursBuilder builder
which can be used to generate a plot of a SimBC
in the graphics area. |
interface |
SimBcXyPlotBuilder
Represents a
SimBcXyPlotBuilder builder
which can be used to generate a XY plot of a SimBC
in the graphics area. |
interface |
SimConstraintSetBuilder
Represents a
SimConstraintSetBuilder builder To create a new instance of this class, use SimSimulation.createConstraintSetBuilder(java.lang.String, nxopen.cae.SimConstraintSet) Created in NX11.0.0 |
interface |
SimLoadSetBuilder
Represents a
SimLoadSetBuilder builder To create a new instance of this class, use SimSimulation.createLoadSetBuilder(java.lang.String, java.lang.String, nxopen.cae.SimLoadSet, int) Created in NX10.0.0 |
interface |
SimMotionLoadsBuilder
Represents a
SimMotionLoadsBuilder
To create a new instance of this class, use SimSimulation.createMotionLoadsBuilder() Created in NX5.0.1 |
interface |
SmoothOptResultsBuilder
This builder is meant for optimization results related to material density.
|
interface |
SolidPropertyCheckBuilder
Represents a
SolidPropertyCheckBuilder
To create a new instance of this class, use ModelCheckManager.createSolidPropertyCheckBuilder() Created in NX5.0.1 |
interface |
SolutionManager
Represents
SolutionManager
To create a new instance of this class, use SimSimulation.createSolutionManager() Created in NX10.0.0 |
interface |
SpiderElementBuilder
Represents a
SpiderElementBuilder
To create a new instance of this class, use NodeElementManager.createSpiderElementBuilder() Created in NX5.0.1 |
interface |
SpringEADBuilder
This class provides Spring Associated Data Support
To create a new instance of this class, use NodeElementManager.createSpringEadBuilder() Default values. |
interface |
StandardBeamSectionBuilder
Represents a
StandardBeamSectionBuilder
To create a new instance of this class, use BeamSectionCollection.createStandardBeamSectionBuilder(nxopen.cae.StandardBeamSection) Created in NX7.5.0 |
interface |
StepManager
Represents
StepManager
To create a new instance of this class, use SimSimulation.createStepManager(nxopen.cae.SimSolution) Created in NX10.0.0 |
interface |
SuppressHoleBuilder
Builder for creating Hole Suppression Hole
To create a new instance of this class, use AbstractionManager.createSuppressHoleBuilder() Default values. |
interface |
SurfaceCoatBuilder
Builder for creating Surface Coat
To create a new instance of this class, use MeshManager.createSurfaceCoatBuilder(nxopen.cae.MeshShellFromSolid) Created in NX6.0.1 |
interface |
SwapDiagonalBuilder
Represents a
SwapDiagonalBuilder
To create a new instance of this class, use NodeElementManager.createSwapDiagonalBuilder() Created in NX12.0.0 |
interface |
SweepBetweenMeshBuilder
Deprecated.
Deprecated in NX10.0.0. Use
Mesh3dHexBuilder .
|
interface |
ThickenMeshBuilder
Represents a
ThickenMeshBuilder
To create a new instance of this class, use NodeElementManager.createThickenMeshBuilder() Created in NX11.0.0 |
interface |
ThicknessBuilder
Represents a
ThicknessBuilder
To create a new instance of this class, use NodeElementInfoManager.createThicknessBuilder(nxopen.cae.Mesh) Created in NX6.0.1 |
interface |
ThicknessPlotContoursBuilder
Represents a
ThicknessPlotContoursBuilder builder
which can be used to generate a plot of a SimBC in the graphics area. |
interface |
TransientResultsReductionBuilder
Represents a
TransientResultsReductionBuilder To obtain an instance of this class use Session.resultManager() . |
interface |
UnStitchEdgeBuilder
Represents a
UnStitchEdgeBuilder To create a new instance of this class, use FemPart.createUnStitchEdgeBuilder() Created in NX6.0.0 |
interface |
UserDefinedSolidBeamSectionBuilder
Represents a
UserDefinedSolidBeamSectionBuilder
To create a new instance of this class, use BeamSectionCollection.createUserDefinedSolidBeamSectionBuilder(nxopen.cae.UserDefinedSolidBeamSection) Created in NX7.5.0 |
interface |
ViewLaminateBuilder
Represents a View Laminate Builder.
|
interface |
WeldBuilder
Represents a
WeldBuilder
To create a new instance of this class, use MeshManager.createWeldBuilder(nxopen.cae.Mesh) Created in NX7.5.2 |
Modifier and Type | Interface and Description |
---|---|
interface |
LoadCaseListBuilder
This is a manager to the loadcases of
MarginSolution class. |
interface |
LoadCaseSetBuilder
This is a manager to the
LoadCaseSet class. |
interface |
MarginCalculationBuilder
Represents a
MarginCalculation builder. |
interface |
MarginSolutionBuilder
This is a manager to the
MarginSolution class. |
Modifier and Type | Interface and Description |
---|---|
interface |
AlignBeamElementDirectionBuilder
Represents a
AlignBeamElementDirectionBuilder builder used to align the Directions of
connected beam elements with a seed beam element. |
interface |
AlignShellElementFirstEdgeBuilder
Represents a
AlignShellElementFirstEdgeBuilder builder used to align the first edges of
connected shell elements with a seed element edge. |
interface |
AlignShellElementNormalBuilder
Represents a
AlignShellElementNormalBuilder builder used to align the normals of
connected shell elements with a seed shell element. |
interface |
DuplicateElementsCheckBuilder
Represents a
DuplicateElementsCheckBuilder
to check for duplicate elements within the candidate elements. |
interface |
DuplicateNodesCheckBuilder
Represents a
DuplicateNodesCheckBuilder
to check for duplicate nodes within the candidate nodes. |
interface |
ElementEdgeCheckBuilder
Represents a
ElementEdgeCheckBuilder which can be
used to detect free element edges or non-manifold edges. |
interface |
ElementMaterialOrientationCheckBuilder
Represents a
ElementMaterialOrientationCheckBuilder
used to check the material orientation for shell and solid elements. |
interface |
ElementQualityCheckBuilder
Represents a
ElementQualityCheckBuilder to
perform quality checking on the candidate elements. |
interface |
FaceClearanceCheckBuilder
Represents a
FaceClearanceCheckBuilder to perform polygon face
interference or clearance check. |
interface |
ModelSetupCheckBuilder
Represents a
ModelSetupCheckBuilder which can be
used to check if the active SimSolution contains all the necessary
items for the analysis, including elements, loads, constraints and materials. |
interface |
ReverseBeamElementDirectionBuilder
Represents a
ReverseBeamElementDirectionBuilder used to reverse directions
for specified beam elements. |
interface |
ReverseShellElementNormalBuilder
Represents a
ReverseShellElementNormalBuilder used to reverse normals
for specified shell elements. |
interface |
SolidElementFaceNormalBuilder
Represents a
SolidElementFaceNormalBuilder used to reorient normals
for left handed solid elements. |
Modifier and Type | Interface and Description |
---|---|
interface |
BaseBuilder
Represents the abstract builder class for all objects defined in response analysis meta solution
This is an abstract class, and cannot be created. |
interface |
CsdEvaluationSettingBuilder
Represents the CSD build
To create a new instance of this class, use EvaluationSettingManager.createCsdEvaluationSettingBuilder(nxopen.cae.responsesimulation.CsdEvaluationSetting) Created in NX6.0.0 |
interface |
CSDExcitationBuilder
Represents the manager to
CSDExcitation . |
interface |
DDAMExcitationBuilder
Represents the manager to
DDAMExcitation . |
interface |
DistributedLoadExcitationBuilder
Represents the manager to
DistributedLoadExcitation . |
interface |
DynamicResultEvaluationSettingBuilder
Represents the abstract builder class of evaluation setting for all dynamic results evaluations.
|
interface |
ElementalFunctionEvaluationSettingBuilder
This is a manager to the
ElementalFunctionEvaluationSetting class. |
interface |
EvaluationSettingBuilder
Represents the abstract builder class of all evaluation setting classes.
|
interface |
ExcitationBuilder
Represents the abstract excitation builder class.
|
interface |
FrfEvaluationSettingBuilder
This is a manager to the
FrfEvaluationSetting class. |
interface |
FunctionEvaluationSettingBuilder
Represents the abstract builder class of evaluation setting for function response evaluation
This is an abstract class, and cannot be created. |
interface |
LcrResultsEvaluationSettingBuilder
This is a manager to the
LcrResultsEvaluationSetting class. |
interface |
ModalResultsEvaluationSettingBuilder
Represents the abstract builder class of evaluation setting for FRF and transmissibility
This is an abstract class, and cannot be created. |
interface |
NodalFunctionEvaluationSettingBuilder
This is a manager to the
NodalFunctionEvaluationSetting class. |
interface |
NodalFunctionExcitationBuilder
Represents the manager to
NodalFunctionExcitation . |
interface |
PeakValueEvaluationSettingBuilder
This is a manager to the
PeakValueEvaluationSetting class. |
interface |
PrlResultsEvaluationSettingBuilder
Represents the abstract builder class of evaluation setting for peak value, RMS results
and LCR results.
|
interface |
ResponseResultsEvaluationSettingBuilder
This is a manager to the
ResponseResultsEvaluationSetting class. |
interface |
RmsResultsEvaluationSettingBuilder
This is a manager to the
RmsResultsEvaluationSetting class. |
interface |
RotationalDDAMExcitationBuilder
Represents the manager to
DDAMExcitation . |
interface |
RotationalNodalFunctionExcitationBuilder
Represents the manager to
RotationalNodalFunctionExcitation . |
interface |
RSEventBuilder
Represents the manager of CAE.ResponseSimulation.RSEvent.
|
interface |
SensorBuilder
Represents a
SensorBuilder
To create a new instance of this class, use SensorCollection.createSensorBuilder(nxopen.cae.responsesimulation.Sensor) Created in NX5.0.0 |
interface |
SensorEvaluationSettingBuilder
This is a manager to the
SensorEvaluationSetting class. |
interface |
SolutionBuilder
This is a manager to the
Solution class. |
interface |
StaticLoadExcitationBuilder
Represents the manager to
StaticLoadExcitation . |
interface |
StrainGageBuilder
Represents a StrainGageBuilder
To create a new instance of this class, use StrainGageCollection.createStrainGageBuilder(nxopen.cae.responsesimulation.StrainGage) Default values. |
interface |
StrainGageEvaluationSettingBuilder
This is a manager to the
StrainGageEvaluationSetting class. |
interface |
StrengthResultsEvaluationSettingBuilder
This is a manager to the
StrengthResultsEvaluationSetting class. |
interface |
TranslationalDDAMExcitationBuilder
Represents the manager to
DDAMExcitation . |
interface |
TranslationalNodalFunctionExcitationBuilder
Represents the manager to
TranslationalNodalFunctionExcitation . |
interface |
TransmissibilityEvaluationSettingBuilder
This is a manager to the
TransmissibilityEvaluationSetting class. |
interface |
VelocityImpactExcitationBuilder
Represents a
VelocityImpactExcitationBuilder
To create a new instance of this class, use ExcitationCollection.createVelocityImpactExcitationBuilder(nxopen.cae.responsesimulation.VelocityImpactExcitation) Default values. |
Modifier and Type | Interface and Description |
---|---|
interface |
AlongMachineAxisMoveBuilder
Represents Along MCS Axis Move Builder
To create a new instance of this class, use MoveCollection.createAlongMcsAxisMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
AlongMcsAxisMoveBuilder
Represents Along MCS Axis Move Builder
To create a new instance of this class, use MoveCollection.createAlongMcsAxisMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
AlongToolAxisMoveBuilder
Represents the Move To Point Builder
To create a new instance of this class, use MoveCollection.createAlongToolAxisMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
BarrelToolBuilder
Represents a BarrelTool Builder
To create a new instance of this class, use NCGroupCollection.createBarrelToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
BladeCutLevels
Represents a Blade Cut Levels Builder
This is an abstract class and cannot be instantiated. |
interface |
BoundaryTurnBlank
Represents a
BoundaryTurnBlank
This builder cannot be instantiated separately. |
interface |
BoundaryTurnMemberCorner
Represents a
BoundaryTurnMemberCorner
This builder cannot be instantiated separately. |
interface |
BoundaryTurnMemberEvents
Represents a
BoundaryTurnMemberEvents
This builder cannot be instantiated separately. |
interface |
BoundaryTurnMemberFeed
Represents a
BoundaryTurnMemberFeed
This builder cannot be instantiated separately. |
interface |
BoundaryTurnMemberFineFinishCorner
Represents a
BoundaryTurnMemberFineFinishCorner
This builder cannot be instantiated separately. |
interface |
BoundaryTurnMemberFineFinishOffset
Represents a
BoundaryTurnMemberFineFinishOffset
This builder cannot be instantiated separately. |
interface |
BoundaryTurnMemberOffset
Represents a
BoundaryTurnMemberOffset
This builder cannot be instantiated separately. |
interface |
CavityMillingBuilder
Represents a CavityMilling Builder
To create a new instance of this class, use OperationCollection.createCavityMillingBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
CenterlineDrillTurningBuilder
Represents a CenterlineDrillTurningBuilder
To create a new instance of this class, use OperationCollection.createCenterlineDrillTurningBuilder(nxopen.cam.CAMObject) Created in NX6.0.0 |
interface |
ChamferMillingBuilder
Represents a ChamferMillingBuilder Builder
To create a new instance of this class, use OperationCollection.createChamferMillingBuilder(nxopen.cam.CAMObject) Created in NX9.0.2 |
interface |
CircularAboutAxisMoveBuilder
Represents the Circular Move To Point Builder
To create a new instance of this class, use MoveCollection.createCircularAboutAxisMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
CollisionConfigurationBuilder
Represents a
CollisionConfigurationBuilder
This is an abstract class, and cannot be instantiated. |
interface |
CollisionPairBuilder
Represents a
CollisionPairBuilder
To create a new instance of this class, use KinematicConfigurator.createCollisionPairBuilder() Created in NX6.0.0 |
interface |
ContainerMoveBuilder
Represents the container move
To create a new instance of this class, use MoveCollection.createContainerMoveBuilder(nxopen.cam.Move, int) Created in NX11.0.2 NX_REMOVE_FROM_JAVA_API |
interface |
ConvertFromMCDBuilder
Represents a
ConvertFromMCDBuilder To create a new instance of this class, use KinematicConfigurator.createConvertFromMcdBuilder() Created in NX9.0.0 |
interface |
CutDepthChecker
Represents a cut depth checker object
This has not creator . |
interface |
CylinderMillingBuilder
Represents a CylinderMillingBuilder Builder
To create a new instance of this class, use OperationCollection.createCylinderMillingBuilder(nxopen.cam.CAMObject) Created in NX8.0.0 |
interface |
CylindricalMillingBuilder
Represents a CylindricalMilling Builder
This is an abstract class and cannot be instantiated. |
interface |
DeltaMoveBuilder
Represents the Delta Move Builder
To create a new instance of this class, use MoveCollection.createDeltaMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
DocumentationBuilder
Represents a Documentation Builder
To create a new instance of this class, use OperationCollection.createDocumentationBuilder(nxopen.cam.CAMObject) Created in NX9.0.3 |
interface |
DPMItpBuilder
Represents an DPMItp Builder
To create a new instance of this class, use OperationCollection.createDpmitpBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
DrillBackCountersinkTool
Represents a Drill Back Countersink Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillBackCountersinkTool(nxopen.cam.CAMObject) Created in NX10.0.2 |
interface |
DrillBackSpotfacingToolBuilder
Represents a drill back spotfacing Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillBackSpotfacingToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
DrillBoreToolBuilder
Represents a drill bore Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillBoreToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
DrillBoringBarTool
Represents a new Boring Bar Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillBoringBarTool(nxopen.cam.CAMObject) Created in NX11.0.1 |
interface |
DrillBurnishingToolBuilder
Represents a drill burnishing Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillBurnishingToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
DrillCenterBellToolBuilder
Represents a Drill Center Bell Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillCenterBellToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
DrillChamferBoringBarTool
Represents a Chamfer Boring Bar Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillChamferBoringBarTool(nxopen.cam.CAMObject) Created in NX11.0.1 |
interface |
DrillCoreToolBuilder
Represents a drill core Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillCoreToolBuilder(nxopen.cam.CAMObject) Created in NX9.0.0 |
interface |
DrillCounterboreToolBuilder
Represents a drill counterbore Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillCounterboreToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
DrillCtskToolBuilder
Represents a Drill Ctsk Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillCtskToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
DrillGeomBuilder
Represents a DrillGeom Builder
To create a new instance of this class, use NCGroupCollection.createDrillGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
DrillMethodBuilder
Represents a Drill Method Builder
To create a new instance of this class, use NCGroupCollection.createDrillMethodBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
DrillReamerToolBuilder
Represents a drill Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillReamerToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
DrillSpotdrillToolBuilder
Represents a drill spotdrill Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillSpotdrillToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
DrillSpotfaceToolBuilder
Represents a drill spotface tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillSpotfaceToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
DrillStdToolBuilder
Represents a drill std Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillStdToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
DrillStepToolBuilder
Represents a drill step Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillStepToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
DrillTapToolBuilder
Represents a drill tap Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillTapToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
DrillThreadMillToolBuilder
Represents a drill thread mill Tool Builder
To create a new instance of this class, use NCGroupCollection.createDrillThreadMillToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
DrillToolBuilder
Represents a drill Tool Builder
This is an abstract class, and cannot be instantiated. |
interface |
DriveChainItemBuilder
Represents the Drive Chain Item Builder
This cannot be instantiated . |
interface |
EngravingBuilder
Represents a Engraving Builder
To create a new instance of this class, use OperationCollection.createEngravingBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
FaceMillingBuilder
Represents a FaceMilling Builder
To create a new instance of this class, use OperationCollection.createFaceMillingBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
FeatureBasedGeomBuilder
Represents a FeatureBasedGeom Builder
To create a new instance of this class, use NCGroupCollection.createFeatureBasedGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
FeatureGeomBuilder
Represents a FeatureGeom Builder
This is an abstract class, and cannot be instantiated. |
interface |
FeatureGroupBuilder
Represents a FeatureBasedGeom Builder
To create a new instance of this class, use NCGroupCollection.createFeatureGroupBuilder(nxopen.cam.CAMObject) Created in NX9.0.3 |
interface |
FeatureMillingBuilder
Represents a FeatureMilling Builder
To create a new instance of this class, use OperationCollection.createFeatureMillingBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
FeatureProcessBuilder
The Create Feature Process Builder class creates operations and features groups
To create a new instance of this class, use CAMSetup.createFeatureProcessBuilder() Default values. |
interface |
FeatureRecognitionBuilder
Represents a FeatureRecognition Builder
To create a new instance of this class, use CAMSetup.createFeatureRecognitionBuilder(nxopen.cam.CAMObject) Created in NX6.0.0 |
interface |
FeatureTeaching
Represents a FeatureTeaching Builder
To create a new instance of this class, use CAMSetup.createFeatureTeaching(nxopen.cam.CAMObject) Created in NX8.0.0 |
interface |
FeedsOptimizeBuilder
Represents a
FeedsOptimizeBuilder
a "commit" of this object will perform the Feed Rate Optimization. |
interface |
FinishTurningBuilder
Represents a FinishTurning Builder
To create a new instance of this class, use OperationCollection.createFinishTurningBuilder(nxopen.cam.CAMObject) Created in NX6.0.0 |
interface |
FollowCurveMoveBuilder
Represents the Follow Curve Move Builder
To create a new instance of this class, use MoveCollection.createFollowCurveMoveBuilder(nxopen.cam.Move) Default values. |
interface |
FollowGeometryMoveBuilder
Represents the Follow Geometry Move Builder
This is an abstract class, and cannot be created. |
interface |
FollowPartMoveBuilder
Represents the Follow Part Move Builder
To create a new instance of this class, use MoveCollection.createFollowPartMoveBuilder(nxopen.cam.Move) Default values. |
interface |
FormToolBuilder
Represents a Form tool builder
To create a new instance of this class, use NCGroupCollection.createFormToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
GeneralPropertiesBuilder
Represents a
GeneralPropertiesBuilder to be used for setting the name
of a specified CAM object. |
interface |
GenericToolBuilder
Represents a Generic Tool Builder
To create a new instance of this class, use NCGroupCollection.createGenericToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
GenericTrackingBuilder
Represents a GenericTracking Builder
To create a new instance of this class, use Tool.createGenericTrackingBuilder(nxopen.cam.SolidTrackPoint) Created in NX5.0.0 |
interface |
GmcOpBuilder
Represents a GmcOp Builder
To create a new instance of this class, use OperationCollection.createGmcopBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
GougeCheckBuilder
Represents a
GougeCheckBuilder . |
interface |
GrooveMillingBuilder
Represents a GrooveMillingBuilder
To create a new instance of this class, use OperationCollection.createGrooveMillingBuilder(nxopen.cam.CAMObject) Created in NX9.0.0 |
interface |
GrooveToolBuilder
Represents a Groove tool builder
To create a new instance of this class, use NCGroupCollection.createGrooveToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
GroupFeatures
Represents the group features command
To create a new instance of this class, use NCGroupCollection.createGroupFeatures() Default values. |
interface |
HoldingSystemBuilder
Represents a
HoldingSystemBuilder
This is an abstract class, and cannot be instantiated. |
interface |
HoleBossGeometry
Represents a CAM geometry builder
To create a new instance of this class, use NCGroupCollection.createHoleBossGeometryBuilder(nxopen.cam.CAMObject) Created in NX7.5.0 |
interface |
HoleDrillingBuilder
Represents a HoleDrillingBuilder Builder
To create a new instance of this class, use OperationCollection.createHoleDrillingBuilder(nxopen.cam.CAMObject) Created in NX9.0.0 |
interface |
HoleMachiningBuilder
Represents a HoleMachiningBuilder Builder
This is an abstract class and cannot be instantiated. |
interface |
HoleMakingBuilder
Represents a HoleMaking Builder
To create a new instance of this class, use OperationCollection.createHoleMakingBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
InspectionAlignmentAssistantBuilder
Represents a CMM Inspection Alignment Assistant Builder,
this builder's Commit can produce more than one object,
the GetCommittedObjects can be used to get the objects
and the order of GetCommittedObject's output array is not stable.
|
interface |
InspectionAlignmentBuilder
Represents a CMM Inspection Alignment builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionAlignmentBuilder(nxopen.cam.CAMObject) Created in NX7.5.2 |
interface |
InspectionAnalyzeBuilder
Inspection Analyze options dialog builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionAnalyzeBuilder(nxopen.cam.CAMObject) Created in NX8.5.0 |
interface |
InspectionAnalyzeOutputBuilder
Inspection Analyze Output options dialog builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionAnalyzeOutputBuilder(nxopen.cam.CAMObject) Created in NX8.5.1 |
interface |
InspectionArcFeatureBuilder
Represents a CMM Inspection Arc Feature builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionArcFeatureBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
interface |
InspectionCircleFeatureBuilder
Represents a CMM Inspection Circle Feature builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionCircleFeatureBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
interface |
InspectionCmmCommandBuilder
Represents a CMM Inspection miscellaneous command builder.
|
interface |
InspectionCollisionAvoidanceBuilder
Collision Avoidance Dialog builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionCollisionAvoidanceBuilder(nxopen.cam.CAMObject) Created in NX8.0.0 |
interface |
InspectionConeFeatureBuilder
Represents a CMM Inspection Cone Feature builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionConeFeatureBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
interface |
InspectionConstructedFeatureBuilder
Represents a CMM Inspection Constructed Feature Builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionConstructedFeatureBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
interface |
InspectionCparlnFeatureBuilder
Represents a CMM Inspection Cparln Feature Builder.
|
interface |
InspectionCreatePathsBuilder
Create Paths Dialog builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionCreatePathsBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
interface |
InspectionCurveFeatureBuilder
Represents a CMM Inspection Curve Feature builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionCurveFeatureBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
interface |
InspectionCylinderFeatureBuilder
Represents a CMM Inspection Cylinder Feature builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionCylinderFeatureBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
interface |
InspectionDeleteMeaPtsBuilder
Inspection Delete Analyze Points dialog builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionDeleteMeaPtsBuilderSel(nxopen.cam.CAMObject[]) Created in NX9.0.1 |
interface |
InspectionDeltaMoveBuilder
Represents the builder for the CMM Inspection sub-operation Delta Move.
|
interface |
InspectionEdgePointFeatureBuilder
Represents a CMM Inspection Edge Point Feature builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionEdgePointFeatureBuilder(nxopen.cam.CAMObject) Created in NX9.0.0 |
interface |
InspectionGraphicalReportBuilder
Represents the builder for the CMM Inspection Graphical Report Operation
To create a new instance of this class, use InspectionOperationCollection.createGraphicalReportBuilder(nxopen.cam.CAMObject) Created in NX10.0.3 |
interface |
InspectionGraphicalReportOutputBuilder
Represents the builder for Inspection Graphical Report Output.
|
interface |
InspectionImportDmisBuilder
Inspection Import Dmis dialog builder
To create a new instance of this class, use InspectionOperationCollection.createImportDmisBuilder(nxopen.cam.InspectionGroup) Created in NX11.0.1 |
interface |
InspectionLinear5axisMoveToPointBuilder
Represents the builder for the CMM Inspection sub-operation Linear 5axis Move To Point.
|
interface |
InspectionLinearMoveToPointBuilder
Represents the builder for the CMM Inspection sub-operation Linear Move To Point.
|
interface |
InspectionLineFeatureBuilder
Represents a CMM Inspection Line Feature builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionLineFeatureBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
interface |
InspectionLinkPmiBuilder
Create Link PMI Dialog Builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionLinkPmiBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
interface |
InspectionMeasDataBuilder
Inspection Measured Data dialog builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionMeasDataBuilder(nxopen.cam.CAMObject) Created in NX8.5.0 |
interface |
InspectionMeasurePointBuilder
Represents the builder for the CMM Inspection sub-operation Measure Point.
|
interface |
InspectionMethodBuilder
Represents the builder for a CMM Inspection method.
|
interface |
InspectionMoveBuilder
Represents CMM Inspection Move Builder
This cannot be instantiated . |
interface |
InspectionOperationTransformBuilder
Create transformed inspection operations,
this builder's Commit can produce more than one object,
the GetCommittedObjects can be used to get the objects
and the order of GetCommittedObject's output array is not stable.
|
interface |
InspectionOutputOperationBuilder
this class creates the output operation
To create a new instance of this class, use InspectionOperationCollection.createInspectionOutputOperationBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
interface |
InspectionParplnFeatureBuilder
Represents a CMM Inspection Parpln Feature Builder.
|
interface |
InspectionPathBuilder
Represents the builder for a CMM Inspection path.
|
interface |
InspectionPatternFeatureBuilder
Represents a CMM Inspection Pattern Feature builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionPatternFeatureBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
interface |
InspectionPlaneFeatureBuilder
Represents a CMM Inspection Plane Feature builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionPlaneFeatureBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
interface |
InspectionPointFeatureBuilder
Represents a CMM Inspection Point Feature builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionPointFeatureBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
interface |
InspectionPolarGridBuilder
Represents the builder for the CMM Inspection Polar Grid sub-operation.
|
interface |
InspectionProbeToolBuilder
Represents an Inspection Probe Tool Builder
To create a new instance of this class, use InspectionGroupCollection.createInspectionProbeToolBuilder(nxopen.cam.CAMObject) Created in NX9.0.0 |
interface |
InspectionProbeTrackingBuilder
Represents a InspectionProbeTracking builder
To create a new instance of this class, use InspectionTool.createInspectionProbeTrackingBuilder(nxopen.cam.ProbeTrackPoint) Created in NX9.0.0 |
interface |
InspectionSaveToLayerBuilder
Inspection Analyze Save to Layer dialog builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionSaveToLayerBuilderSel(nxopen.cam.CAMObject[]) Created in NX9.0.1 |
interface |
InspectionScanArcBuilder
Represents the builder for the CMM Inspection sub-operation Scan Arc.
|
interface |
InspectionScanCurve5AxisBuilder
Represents the builder for the CMM Inspection sub-operation Scan Curve.
|
interface |
InspectionScanCurveBuilder
Represents the builder for the CMM Inspection sub-operation Scan Curve.
|
interface |
InspectionScanHelixBuilder
Represents the builder for the CMM Inspection sub-operation Scan Helix.
|
interface |
InspectionScanLineBuilder
Represents the builder for the CMM Inspection sub-operation Scan Line.
|
interface |
InspectionSensorBuilder
Represents the builder for a CMM Inspection Sensor.
|
interface |
InspectionSensorMassEditBuilder
Edit Multiple Subops Dialog builder
To create a new instance of this class, use InspectionMoveCollection.createInspectionSensorMassEditBuilder(nxopen.cam.InspectionMoveSubop) Created in NX7.5.3 |
interface |
InspectionSphereFeatureBuilder
Represents a CMM inspection sphere feature builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionSphereFeatureBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
interface |
InspectionSurfaceFeatureBuilder
Represents a CMM Inspection Curve Feature builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionSurfaceFeatureBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
interface |
InspectionToleranceOperationBuilder
this class creates the tolerance operation
To create a new instance of this class, use InspectionOperationCollection.createInspectionToleranceOperationBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
interface |
InspectionTorusFeatureBuilder
Represents a CMM Inspection Torus Feature builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionTorusFeatureBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
interface |
InspectionUVGridBuilder
Represents the builder for the CMM Inspection UV Grid sub-operation.
|
interface |
IpwAnalysisBuilder
Represents a
IpwAnalysisBuilder
This is an abstract class, and cannot be instantiated. |
interface |
IpwContainmentCurvesBuilder
Represents a
IpwContainmentCurvesBuilder
This is an abstract class, and cannot be instantiated. |
interface |
LaserCircleCutout
Represents a LaserCircleCutout
To create a new instance of this class, use MoveCollection.createLaserCircleCutout(nxopen.cam.Move) Created in NX9.0.0 |
interface |
LaserHexagonCutout
Represents a LaserHexagonCutout
To create a new instance of this class, use MoveCollection.createLaserHexagonCutout(nxopen.cam.Move) Created in NX9.0.0 |
interface |
LaserLinearMove
Represents a LaserLinearMove
To create a new instance of this class, use MoveCollection.createLaserLinearMove(nxopen.cam.Move) Created in NX9.0.0 |
interface |
LaserMethod
Represents a Laser Method
To create a new instance of this class, use NCGroupCollection.createLaserMethod(nxopen.cam.CAMObject) Created in NX9.0.0 |
interface |
LaserProfileMove
Represents a LaserProfileMove
To create a new instance of this class, use MoveCollection.createLaserProfileMove(nxopen.cam.Move) Created in NX9.0.0 |
interface |
LaserRectangleCutout
Represents a LaserRectangleCutout
To create a new instance of this class, use MoveCollection.createLaserRectangleCutout(nxopen.cam.Move) Created in NX9.0.0 |
interface |
LaserSlotCutout
Represents a LaserSlotCutout
To create a new instance of this class, use MoveCollection.createLaserSlotCutout(nxopen.cam.Move) Created in NX9.0.0 |
interface |
LaserTeachMode
Represents a Laser TeachMode
To create a new instance of this class, use OperationCollection.createLaserTeachMode(nxopen.cam.CAMObject) Created in NX9.0.0 |
interface |
LaserTool
Represents a Laser Tool
To create a new instance of this class, use NCGroupCollection.createLaserTool(nxopen.cam.CAMObject) Created in NX9.0.0 |
interface |
LatheMachineControlBuilder
Represents a LatheMachineControl Builder
To create a new instance of this class, use OperationCollection.createLatheMachineControlBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
LatheUserDefinedBuilder
Represents a LatheUserDefined Builder
To create a new instance of this class, use OperationCollection.createLatheUserDefinedBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
MachineGroupBuilder
Represents a MachineGroup Builder
To create a new instance of this class, use NCGroupCollection.createMachineGroupBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
MachineHeadGroupBuilder
Represents a MachineHeadGroup Builder
To create a new instance of this class, use NCGroupCollection.createMachineHeadGroupBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
MachinePocketGroupBuilder
Represents a MachinePocketGroup Builder
To create a new instance of this class, use NCGroupCollection.createMachinePocketGroupBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
MachineTurretGroupBuilder
Represents a MachineTurretGroup Builder
To create a new instance of this class, use NCGroupCollection.createMachineTurretGroupBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
ManageToolPartBuilder
Represents an Export Tool Part Builder
This is an abstract class, and cannot be instantiated. |
interface |
ManualControlBuilder
Represents a ManualControl Operation Builder
To create a new instance of this class, use OperationCollection.createManualControlBuilder(nxopen.cam.CAMObject) Created in NX10.0.3 |
interface |
ManualFeatureBuilder
Represents a
ManualFeatureBuilder
To obtain an instance of this class use FeatureRecognitionBuilder Created in NX6.0.0 |
interface |
MapFeatureTeaching
Represents a MapFeatureTeaching Builder
To create a new instance of this class, use CAMSetup.createMapFeatureTeaching(nxopen.cam.CAMObject) Created in NX10.0.3 NX_REMOVE_FROM_JAVA_API |
interface |
MethodBuilder
Represents a Method Builder
This is an abstract class, and cannot be instantiated. |
interface |
MillAreaGeomBuilder
Represents a MillAreaGeom Builder
To create a new instance of this class, use NCGroupCollection.createMillAreaGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
MillBoundaryGeomBuilder
Represents a MillBoundaryGeom Builder
To create a new instance of this class, use NCGroupCollection.createMillBoundaryGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
MillFormToolBuilder
Represents a MillForm Tool Builder
To create a new instance of this class, use NCGroupCollection.createMillFormToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
MillGeomBuilder
Represents a MillGeom Builder
To create a new instance of this class, use NCGroupCollection.createMillGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
MillingToolBuilder
Represents a MillingTool Builder
This is an abstract class, and cannot be instantiated. |
interface |
MillMachineControlBuilder
Represents a MillMachineControl Builder
To create a new instance of this class, use OperationCollection.createMillMachineControlBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
MillMethodBuilder
Represents a Mill Method Builder
To create a new instance of this class, use NCGroupCollection.createMillMethodBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
MillOperationBuilder
Represents a MillOperation Builder
This is an abstract class and cannot be instantiated. |
interface |
MillOrientGeomBuilder
Represents a MillOrientGeom Builder
To create a new instance of this class, use NCGroupCollection.createMillOrientGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
MillTextGeomBuilder
Represents a MillTextGeom Builder
To create a new instance of this class, use NCGroupCollection.createMillTextGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
MillToolBuilder
Represents a Mill Tool Builder
To create a new instance of this class, use NCGroupCollection.createMillToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
MillToolProbingBuilder
Represents a Mill Tool Probing Builder
To create a new instance of this class, use OperationCollection.createMillToolProbingBuilder(nxopen.cam.CAMObject) Created in NX8.5.1 |
interface |
MillUserDefinedBuilder
Represents a MillUserDefined Builder
To create a new instance of this class, use OperationCollection.createMillUserDefinedBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
MillVolumeGeomBuilder
Represents a MillVolumeGeom Builder
To create a new instance of this class, use NCGroupCollection.createMillVolumeGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
MirrorBuilder
Represents a Mirror Builder.
|
interface |
MoveBuilder
Represents Move Builder
This cannot be instantiated . |
interface |
MoveToPointBuilder
Represents the Move To Point Builder
To create a new instance of this class, use MoveCollection.createMoveToPointBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
MultiBladeGeomBuilder
Represents a MultiBladeGeomBuilder Builder
To create a new instance of this class, use NCGroupCollection.createMultiBladeGeometryBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
interface |
MultipleStepoverBuilder
Represents a Builder which holds the data for a set of individual number of passes and
stepover distance.
|
interface |
MultiToolBuilder
Represents a MultiTool Builder
To create a new instance of this class, use NCGroupCollection.createMultiToolBuilder(nxopen.cam.CAMObject) Created in NX11.0.1 |
interface |
NCAssistantBuilder
Represents a NCAssistant Builder
To create a new instance of this class, use CAMSetup.createNCAssistantBuilder() Default values. |
interface |
NCGroupBuilder
Represents a NCGroup Builder
This is an abstract class, and cannot be instantiated. |
interface |
NcmctPartMountingBuilder
Represents a
NcmctPartMountingBuilder
a "commit" of this object will perform the Part Mounting and no object is returned. |
interface |
NormalToToolAxisMoveBuilder
Represents the Move To Point Builder
To create a new instance of this class, use MoveCollection.createNormalToToolAxisMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
ObjectNotes
Represents an Object Notes
To create a new instance of this class, use CAMSetup.createObjectNotes(nxopen.cam.CAMObject) Created in NX9.0.0 |
interface |
ObjectsFeedsBuilder
Represents an Object Action Feeds Builder
To create a new instance of this class, use CAMSetup.createFeedsBuilder(nxopen.cam.CAMObject[]) Created in NX6.0.0 |
interface |
ObjectsUdeSet
Represents an Object Action Ude Set Builder
To create a new instance of this class, use CAMSetup.createObjectsUdeSet(nxopen.cam.CAMObject[], nxopen.cam.CAMSetup.Ude) Created in NX6.0.0 |
interface |
ObjectWorkInstructionBuilder
Represents an Object Work Instruction
To create a new instance of this class, use CAMSetup.createObjectWorkInstructionBuilder(nxopen.cam.CAMObject) Created in NX9.0.3 |
interface |
OperationBuilder
Represents a Opr Builder
This is an abstract class, and cannot be instantiated. |
interface |
OperationSetTeaching
Represents a OperationSetTeaching Builder
To create a new instance of this class, use CAMSetup.createOperationSetTeaching(nxopen.cam.CAMObject) Created in NX10.0.2 NX_REMOVE_FROM_JAVA_API |
interface |
OperationTeaching
Represents a OperationTeaching Builder
To create a new instance of this class, use CAMSetup.createOperationTeaching(nxopen.cam.CAMObject) Created in NX8.0.0 |
interface |
OperationTransformBuilder
OperationTransformBuilder
To create a new instance of this class, use CAMSetup.createOperationTransformBuilder(nxopen.cam.CAMObject[]) Created in NX6.0.0 |
interface |
OptimizeTraverseGroupBuilder
Represents a OptimizeTraverseGroup Builder
To create a new instance of this class, use NCGroupCollection.createOptimizeTraverseGroupBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
OrientGeomBuilder
Represents a OrientGeom Builder
This is an abstract class, and cannot be instantiated. |
interface |
ParamBuilder
Represents a manufacturing object builder.
|
interface |
PlanarMillingBuilder
Represents a PlanarMilling Builder
To create a new instance of this class, use OperationCollection.createPlanarMillingBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
PlanarOperationBuilder
Represents a PlanarOperation Builder
This is an abstract class and cannot be instantiated. |
interface |
PlungeMillingBuilder
Represents a PlungeMilling Builder
To create a new instance of this class, use OperationCollection.createPlungeMillingBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
PointToPointBuilder
Represents a Point to Point Builder (Drilling)
To create a new instance of this class, use OperationCollection.createPointToPointBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
Preferences
Represents a cam preferences Builder
To create a new instance of this class, use CAMSession.createCamPreferences() Created in NX7.5.0 |
interface |
PreprocessGeometryBuilder
Represents a Preprocess Geometry Builder
To create a new instance of this class, use CAMSetup.createPreprocessGeometryBuilder() Created in NX6.0.0 |
interface |
ProbeCalibrateLengthMoveBuilder
Represents the Probe Calibrate Length Move Builder
To create a new instance of this class, use MoveCollection.createProbeCalibrateLengthMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
ProbeCalibrateSphereMoveBuilder
Represents the Probe Calibrate Sphere Move Builder
To create a new instance of this class, use MoveCollection.createProbeCalibrateSphereMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
ProbeCalibrateStylusMoveBuilder
Represents the Probe Calibrate Stylus Move Builder
To create a new instance of this class, use MoveCollection.createProbeCalibrateStylusMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
ProbeClearanceMoveBuilder
Represents the Probe Clearance Move Builder
To create a new instance of this class, use MoveCollection.createProbeClearanceMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
ProbeInspectBorebossMoveBuilder
Represents the Probe Inspect Bore Boss Move Builder
To create a new instance of this class, use MoveCollection.createProbeInspectBorebossMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
ProbeInspectPointMoveBuilder
Represents the Probe Inspect Point Move Builder
To create a new instance of this class, use MoveCollection.createProbeInspectPointMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
ProbeInspectSurfacePointMoveBuilder
Represents the Probe Inspect Surface Point Move Builder
To create a new instance of this class, use MoveCollection.createProbeInspectSurfacePointMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
ProbeToolBuilder
Represents a Probe Tool Builder
To create a new instance of this class, use NCGroupCollection.createProbeToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
ProbeTrackingBuilder
Represents a ProbeTracking Builder
To create a new instance of this class, use Tool.createProbeTrackingBuilder(nxopen.cam.ProbeTrackPoint) Created in NX5.0.0 |
interface |
ProgramOrderGroupBuilder
Represents a ProgramOrderGroup Builder
To create a new instance of this class, use NCGroupCollection.createProgramOrderGroupBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
RadialGrooveMillingBuilder
Represents a RadialGrooveMilling Builder
To create a new instance of this class, use OperationCollection.createRadialGrooveMillingBuilder(nxopen.cam.CAMObject) Created in NX9.0.3 |
interface |
RobotCartesianMove
represents the Rotary Move To Point Builder
To create a new instance of this class, use MoveCollection.createRobotCartesianMove(nxopen.cam.Move) Created in NX11.0.1 NX_REMOVE_FROM_JAVA_API |
interface |
RobotMountMove
represents the Rotary Move To Point Builder
To create a new instance of this class, use MoveCollection.createRobotMountMove(nxopen.cam.Move) Created in NX11.0.1 NX_REMOVE_FROM_JAVA_API |
interface |
RobotPoseMove
represents the Rotary Move To Point Builder
To create a new instance of this class, use MoveCollection.createRobotPoseMove(nxopen.cam.Move) Created in NX11.0.1 NX_REMOVE_FROM_JAVA_API |
interface |
RotaryFinishGeomBuilder
Represents a rotary finish geometry builder.
|
interface |
RotaryPointMoveBuilder
represents the Rotary Move To Point Builder
To create a new instance of this class, use MoveCollection.createRotaryPointMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
RotaryPolarMoveBuilder
Represents the Rotary Polar Builder
To create a new instance of this class, use MoveCollection.createRotaryPolarMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
RotateToolMoveBuilder
Represents the Rotate Tool Move Builder
To create a new instance of this class, use MoveCollection.createRotateToolMoveBuilder(nxopen.cam.Move, nxopen.cam.Move) Created in NX5.0.0 |
interface |
RoughFinishTurningBuilder
Represents a RoughFinishTurning Builder
This is an abstract class and cannot be instantiated. |
interface |
RoughTurningBuilder
Represents a RoughTurning Builder
To create a new instance of this class, use OperationCollection.createRoughTurningBuilder(nxopen.cam.CAMObject) Created in NX6.0.0 |
interface |
SimulationOptionsBuilder
Represents a
SimulationOptionsBuilder
To create a new instance of this class, use KinematicConfigurator.createSimulationOptionsBuilder(nxopen.cam.SimulationOptionsBuilder.DialogType) Created in NX6.0.0 |
interface |
SoftTool
Represents a SoftTool
This is an abstract class, and cannot be instantiated. |
interface |
SolidToolBuilder
Represents a SolidTool Builder
This is an abstract class, and cannot be instantiated. |
interface |
SolidTrackingBuilder
Represents a SolidTracking Builder
To create a new instance of this class, use Tool.createSolidTrackingBuilder(nxopen.cam.SolidTrackPoint) Created in NX5.0.0 |
interface |
SplitSubopCommand
Represents an Split Subop Command Builder
This cannot be instantiated . |
interface |
StockPerPassBuilder
Represents a Builder which holds the data for a set of individual stock per pass.
|
interface |
SurfaceContourBuilder
Represents a SurfaceContour Builder
To create a new instance of this class, use OperationCollection.createSurfaceContourBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
SurfaceRegions
Represents a Surface Regions Builder
To create a new instance of this class, use CAMSetup.createSurfaceRegions(nxopen.features.Feature) Created in NX8.0.0 |
interface |
Teaching
Represents a Teaching Builder
Abstract . |
interface |
TeachmodeEngageSettingsBuilder
Represents a TeachmodeEngageSettingsBuilder
To create a new instance of this class, use OperationCollection.createTeachmodeTurningBuilder(nxopen.cam.CAMObject) Created in NX7.5.0 |
interface |
TeachmodeLinearMoveBuilder
Represents a TeachmodeLinearMove
To create a new instance of this class, use OperationCollection.createTeachmodeTurningBuilder(nxopen.cam.CAMObject) Created in NX7.5.0 |
interface |
TeachmodeProfileMoveBuilder
Represents a TeachmodeProfileMoveBuilder
To create a new instance of this class, use OperationCollection.createTeachmodeTurningBuilder(nxopen.cam.CAMObject) Created in NX7.5.0 |
interface |
TeachmodeRetractSettingsBuilder
Represents a TeachmodeRetractSettings builder
To create a new instance of this class, use OperationCollection.createTeachmodeTurningBuilder(nxopen.cam.CAMObject) Created in NX7.5.0 |
interface |
TeachmodeTurningBuilder
Represents a TeachmodeTurningBuilder
To create a new instance of this class, use OperationCollection.createTeachmodeTurningBuilder(nxopen.cam.CAMObject) Created in NX7.5.0 |
interface |
ThreadMillingBuilder
Represents a ThreadMilling Builder
To create a new instance of this class, use OperationCollection.createThreadMillingBuilder(nxopen.cam.CAMObject) Created in NX7.5.0 |
interface |
ThreadToolBuilder
Represents a Thread tool builder
To create a new instance of this class, use NCGroupCollection.createThreadToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
ThreadTurningBuilder
Represents a ThreadTurning Builder
To create a new instance of this class, use OperationCollection.createThreadTurningBuilder(nxopen.cam.CAMObject) Created in NX6.0.0 |
interface |
ToolBuilder
Represents a Tool Builder
This is an abstract class, and cannot be instantiated. |
interface |
ToolChangePositionBuilder
represents the Rotary Move To Point Builder
To create a new instance of this class, use MoveCollection.createToolChangePositionBuilder(nxopen.cam.Move) Created in NX11.0.2 NX_REMOVE_FROM_JAVA_API |
interface |
ToolPathDivideBuilder
Represents a Tool Path Divide Builder
To create a new instance of this class, use CAMSetup.createToolPathDivideBuilder(nxopen.cam.CAMObject[]) Created in NX5.0.0 |
interface |
ToolPathEditorBuilder
Represents a Tool Path Editor Builder
To create a new instance of this class, use Operation.createToolPathEditorBuilder() Default values. |
interface |
ToolPathSplitBuilder
Represents a Tool Path Split Builder
To create a new instance of this class, use CAMSetup.createToolPathSplitBuilder(nxopen.cam.CAMObject[]) Created in NX6.0.0 |
interface |
ToolPathSplitItemBuilder
Represents a ToolPathSplitItem builder
Use the ToolPathSplitBuilder class to create a ToolPathSplitItemBuilder object. |
interface |
ToolPathSplitParametersBuilder
Represents the Divide Parameters
This object is owned by another builder. |
interface |
ToolPathTiltAvoidance
Represents a Tool Path Tilt Avoidance Builder
This is a sub-builder class and cannot be directly instantiated . |
interface |
ToolPathTiltBuilder
Represents a Tool Path Tilt Builder
To create a new instance of this class, use CAMSetup.createToolPathTiltBuilder(nxopen.cam.CAMObject[]) Created in NX7.5.2 |
interface |
ToolPathTiltClearance
Represents a Tool Path Tilt Clearance Builder
This is a sub-builder class and cannot be directly instantiated . |
interface |
ToolPathTiltMachine
Represents a Tool Path Tilt Machine Builder
This is a sub-builder class and cannot be directly instantiated . |
interface |
ToolPathTiltTilting
Represents a Tool Path Tilt Tilting Builder
This is a sub-builder class and cannot be directly instantiated . |
interface |
ToolTrackingPointBuilder
Represents the Tool Tracking Point Builder
To create a new instance of this class, use MoveCollection.createToolTrackingPointBuilder(nxopen.cam.Move) Created in NX8.5.1 |
interface |
Topology
Represents a CAM topology builder
Use the Geometry class to get a topology builder Created in NX8.0.0 |
interface |
TrackpointBuilder
Represents a Trackpoint Builder
This is an abstract class and can not be instantiated . |
interface |
TToolBuilder
Represents a T Tool Builder
To create a new instance of this class, use NCGroupCollection.createTToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
TurnAvoidanceGeomBuilder
Represents a TurnAvoidanceGeom Builder
To create a new instance of this class, use NCGroupCollection.createTurnAvoidanceGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
TurnBoundaryGeomBuilder
Represents a TurnBoundaryGeom Builder
To create a new instance of this class, use NCGroupCollection.createTurnBoundaryGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
TurnFeatureGeomBuilder
Represents a TurnFeatureGeom Builder
To create a new instance of this class, use NCGroupCollection.createTurnFeatureGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
TurnGeomBuilder
Represents a TurnGeom Builder
To create a new instance of this class, use NCGroupCollection.createTurnGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
TurningOperationBuilder
Represents a Turning Operation Builder
This is an abstract class and cannot be instantiated. |
interface |
TurningToolBuilder
Represents a Turning tool builder
This is an abstract class, and cannot be instantiated. |
interface |
TurnMethodBuilder
Represents a Turn Method Builder
To create a new instance of this class, use NCGroupCollection.createTurnMethodBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
TurnMoveToPointBuilder
Represents the Move To Point Builder
To create a new instance of this class, use MoveCollection.createTurnMoveToPointBuilder(nxopen.cam.Move) Created in NX8.5.1 |
interface |
TurnOrientGeomBuilder
Represents a TurnOrientGeom Builder
To create a new instance of this class, use NCGroupCollection.createTurnOrientGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
TurnPartProbingBuilder
Represents a Turn Part Probing Builder
To create a new instance of this class, use OperationCollection.createTurnPartProbingBuilder(nxopen.cam.CAMObject) Created in NX8.5.1 |
interface |
TurnProbeClearanceBuilder
Represents an probe start of engage Builder
To create a new instance of this class, use MoveCollection.createTurnProbeClearanceBuilder(nxopen.cam.Move) Created in NX8.5.1 |
interface |
TurnProbeInspectPointMoveBuilder
Represents the Turn Probe Inspect Point Move Builder
To create a new instance of this class, use MoveCollection.createTurnProbeInspectPointMoveBuilder(nxopen.cam.Move) Created in NX8.5.1 |
interface |
TurnToolBuilder
Represents a Turn tool builder
To create a new instance of this class, use NCGroupCollection.createTurnToolBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
TurnToolProbingBuilder
Represents a Turn tool probing Builder
To create a new instance of this class, use OperationCollection.createTurnToolProbingBuilder(nxopen.cam.CAMObject) Created in NX8.5.1 |
interface |
UdeMoveBuilder
Represents the Ude Move Builder
To create a new instance of this class, use MoveCollection.createUdeMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
UserDefinedMoveBuilder
Represents the User Defined Move Builder
To create a new instance of this class, use MoveCollection.createUserDefinedMoveBuilder(nxopen.cam.Move, java.lang.String) Created in NX8.0.0 |
interface |
UserDefinedOprBuilder
Represents a UserDefinedOpr Builder
This is an abstract class, and cannot be instantiated. |
interface |
VazlMillingBuilder
Represents a VazlMilling Builder
To create a new instance of this class, use OperationCollection.createVazlMillingBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
VectorDistanceMoveBuilder
Represents the Vector Distance Move Builder
To create a new instance of this class, use MoveCollection.createVectorDistanceMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
VolumeBased25DMillingOperationBuilder
Represents a VolumeBased25DMillingOperation Builder
To create a new instance of this class, use OperationCollection.createVolumeBased25dMillingOperationBuilder(nxopen.cam.CAMObject) Created in NX8.5.0 |
interface |
WedmBasedGeomBuilder
Represents a WedmBasedGeom Builder
To create a new instance of this class, use NCGroupCollection.createWedmBasedGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
WedmCornerControlBuilder
Represents a WedmCornerControl Builder
To create a new instance of this class, use NCGroupCollection.createWedmCornerControlBuilder(nxopen.cam.CAMObject) Created in NX6.0.0 |
interface |
WedmCustomBoundaryDataBuilder
Represents a WedmCustomBoundaryData Builder
No Creator . |
interface |
WedmCutOrderBuilder
Represents a
WedmCutOrderBuilder
This builder cannot be instantiated separately. |
interface |
WedmCuttingBuilder
Represents a WedmCutting Builder
To create a new instance of this class, use NCGroupCollection.createWedmCuttingBuilder(nxopen.cam.CAMObject) Created in NX6.0.0 |
interface |
WedmExtGeomBuilder
Represents a WedmExtGeom Builder
To create a new instance of this class, use NCGroupCollection.createWedmExtGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
WedmFeatureGeomBuilder
Represents a WedmFeatureGeom Builder
To create a new instance of this class, use NCGroupCollection.createWedmFeatureGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
WedmGeomBuilder
Represents a WedmGeom Builder
To create a new instance of this class, use NCGroupCollection.createWedmGeomBuilder(nxopen.cam.CAMObject) Created in NX7.5.0 |
interface |
WedmIntGeomBuilder
Represents a WedmIntGeom Builder
To create a new instance of this class, use NCGroupCollection.createWedmIntGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
WedmLeadInOutBuilder
Represents a WedmLeadInOut Builder
To create a new instance of this class, use NCGroupCollection.createWedmLeadInOutBuilder(nxopen.cam.CAMObject) Created in NX6.0.0 |
interface |
WedmMachineControlBuilder
Represents a WedmMachineControl Builder
To create a new instance of this class, use OperationCollection.createWedmMachineControlBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
WedmMethodBuilder
Represents a Wedm Method Builder
To create a new instance of this class, use NCGroupCollection.createWedmMethodBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
WedmMoveControlBuilder
Represents a WedmMoveControl Builder
To create a new instance of this class, use NCGroupCollection.createWedmMoveControlBuilder(nxopen.cam.CAMObject) Created in NX6.0.0 |
interface |
WedmNocoreGeomBuilder
Represents a WedmNocoreGeom Builder
To create a new instance of this class, use NCGroupCollection.createWedmNocoreGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
WedmOpenGeomBuilder
Represents a WedmOpenGeom Builder
To create a new instance of this class, use NCGroupCollection.createWedmOpenGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
WedmOperationBuilder
Represents a WedmOperation Builder
To create a new instance of this class, use OperationCollection.createWedmOperationBuilder(nxopen.cam.CAMObject) Created in NX7.5.0 |
interface |
WedmOrientGeomBuilder
Represents a WedmOrientGeom Builder
To create a new instance of this class, use NCGroupCollection.createWedmOrientGeomBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
WedmPointDefinitionBuilder
Represents a
WedmPointDefinitionBuilder
This builder cannot be instantiated separately. |
interface |
WedmUserDefinedBuilder
Represents a WedmUserDefined Builder
To create a new instance of this class, use OperationCollection.createWedmUserDefinedBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
WireTool
Represents a Wire Tool
To create a new instance of this class, use NCGroupCollection.createWireTool(nxopen.cam.CAMObject) Created in NX9.0.0 |
interface |
WorkInstructionBuilder
Represents the builder for Work Instruction
To create a new instance of this class, use CAMSetup.createWorkInstructionBuilder(nxopen.cam.CAMObject) Created in NX9.0.3 |
interface |
WorkInstructionOutputBuilder
Represents the builder for Work Instruction Output.
|
interface |
ZLevelMillingBuilder
Represents a ZLevelMilling Builder
To create a new instance of this class, use OperationCollection.createZlevelMillingBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
Modifier and Type | Interface and Description |
---|---|
interface |
AnnotationBuilder
Represents a AnnotationBuilder.
|
interface |
BaseObjectBuilder
Represents a BaseObjectBuilder.
|
interface |
BulkEditBuilder
Represents a BulkEditBuilder to edit bulk of objects.
|
interface |
CannedAnnotationBuilder
Represents a CannedAnnotationBuilder.
|
interface |
ConnectableElementBuilder
Represents a ConnectableElementBuilder.
|
interface |
ConnectionBuilder
Represents a ConnectionBuilder.
|
interface |
DefineTitleBlockBuilder
Represents a
DefineTitleBlockBuilder builder To create a new instance of this class, use TitleBlockCollection.createDefineTitleBlockBuilder(nxopen.diagramming.TitleBlock) Created in NX11.0.1 |
interface |
LeaderLineBuilder
Represents a LeaderLineBuilder.
|
interface |
NodeBuilder
Represents a NodeBuilder.
|
interface |
PopulateTitleBlockBuilder
Represents a
PopulateTitleBlockBuilder builder To create a new instance of this class, use TitleBlockCollection.createPopulateTitleBlockBuilder(nxopen.diagramming.TitleBlock[]) Created in NX11.0.1 |
interface |
ShapeBuilder
Represents a ShapeBuilder.
|
interface |
SheetBordersAndZonesBuilder
The SheetBordersAndZones builder
To create a new instance of this class, use SheetBordersAndZonesCollection.createSheetBordersAndZonesBuilder(nxopen.diagramming.SheetBordersAndZones) Created in NX10.0.0 |
interface |
SheetBuilder
Represents a SheetBuilder.
|
interface |
SheetElementBuilder
Represents a SheetElementBuilder.
|
Modifier and Type | Interface and Description |
---|---|
interface |
TableBuilder
Represents a TableBuilder.
|
Modifier and Type | Interface and Description |
---|---|
interface |
AddendumSectionBuilder
Represents a
AddendumSectionBuilder which is used to create or edit an addendum section. |
interface |
AddendumSectionUserDefinedBuilder
Represents a
AddendumSectionUserDefinedBuilder builder used to select a previously
defined section or a string of objects to define the section shape. |
interface |
AddSurfBuilder
Represents a
AddSurfBuilder builder
To create a new instance of this class, use DieCollection.createAddSurfBuilder(nxopen.features.Feature) Created in NX6.0.0 |
interface |
CastReliefBuilder
Represents a
CastReliefBuilder builder
To create a new instance of this class, use DieCollection.castRelief(nxopen.die.CastRelief) Default values. |
interface |
CastReliefParentBuilder
Represents a Die Cast Relief sub feature.
|
interface |
ClampingSlotBuilder
Represents a Clamping Slot feature builder
To create a new instance of this class, use DieCollection.clampingSlot(nxopen.die.ClampingSlot) Default values. |
interface |
ClearanceBuilder
Represents a builder that is used to create or edit a
Clearance feature. |
interface |
CompensateRoughDataBuilder
Represents a
CompensateRoughDataBuilder . |
interface |
ConnectProfileParentBuilder
Represents a Die Connecting Profile sub feature.
|
interface |
DeckParentBuilder
Represents a Die Deck Feature sub feature.
|
interface |
DieShoeBuilder
Represents a Die Shoe feature builder.
|
interface |
DrawBeadBuilder
Represents a builder that is used to create or edit a
DrawBead feature. |
interface |
DrawDiePunchBuilder
Represents a Draw Die Punch feature builder.
|
interface |
DrawDiePunchSectionBuilder
Represents a Draw Die Punch Section sub feature.
|
interface |
FaceSheetBuilder
Represents a Face Sheet feature
This is an abstract class, and cannot be created. |
interface |
FillAreaBuilder
Represents a builder that is used to create or edit a
FillArea feature. |
interface |
FillBuilder
Represents an Area Fill feature
To create a new instance of this class, use DieCollection.fill(nxopen.features.Feature) Created in NX4.0.0 |
interface |
FingerClearanceNotchBuilder
Represents a builder that is used to create or edit a
FingerClearanceNotch feature. |
interface |
FlangeSteelRibChildBuilder
Represents a Die Flange Steel Rib Child sub feature.
|
interface |
FlangeSteelRibParentBuilder
Represents a Die Flange Steel Rib Parent sub feature.
|
interface |
FlangeTaskBuilder
Represents a Flange Task feature builder.
|
interface |
FormTaskBuilder
Represents a Form Task feature builder.
|
interface |
HandlingCoreBuilder
Represents a builder that is used to create or edit a
HandlingCore feature. |
interface |
HandlingCoreChildBuilder
Represents a Die Handling Core Child sub feature.
|
interface |
HandlingCoreParentBuilder
Represents a Die Handling Core Parent sub feature.
|
interface |
HeelpostBuilder
Represents a
HeelpostBuilder builder
To create a new instance of this class, use DieCollection.heelpost(nxopen.die.Heelpost) Default values. |
interface |
HoleChildBuilder
Represents a Die Hole Child sub feature.
|
interface |
HoleParentBuilder
Represents a Die Hole Parent sub feature.
|
interface |
KeywayBuilder
Represents a
KeywayBuilder builder
To create a new instance of this class, use DieCollection.keyway(nxopen.die.Keyway) Default values. |
interface |
KeywayChildBuilder
Represents a Die Keyway Child sub feature.
|
interface |
KeywayParentBuilder
Represents a Die Keyway Parent sub feature.
|
interface |
LineupBuilder
Represents a Lineup feature builder
To create a new instance of this class, use DieCollection.lineup(nxopen.features.Feature) Created in NX4.0.0 |
interface |
MachineReliefBuilder
Represents a builder that is used to create or edit a
MachineRelief feature. |
interface |
OutputCurvesBuilder
Represents an output curves feature builder.
|
interface |
PadChildBuilder
Represents a Die Pad Child sub feature.
|
interface |
PadParentBuilder
Represents a Die Pad Parent sub feature.
|
interface |
PierceHoleChildBuilder
Represents a Pierce Hole Child sub feature.
|
interface |
PierceHoleParentBuilder
Represents a Pierce Hole Parent sub feature.
|
interface |
PierceTaskBuilder
Represents a Pierce Task feature builder
To create a new instance of this class, use DieCollection.pierceTask(nxopen.features.Feature) Created in NX4.0.0 |
interface |
PointChildBuilder
Represents a Die Point Child sub feature.
|
interface |
PointParentBuilder
Represents a Die Point Parent sub feature.
|
interface |
PressureSystemChildBuilder
Represents a Die Pressure System Child sub feature.
|
interface |
PressureSystemParentBuilder
Represents a Die Pressure System Parent sub feature.
|
interface |
QuickBinderBuilder
Represents a
QuickBinderBuilder builder which builds a developable binder sheet
body by adding cones, cylinders, or planes to an approximated face. |
interface |
QuickBinderWrapBuilder
Represents a
QuickBinderWrapBuilder builder
This is an abstract class, and cannot be created. |
interface |
RibChildBuilder
Represents a Die Rib Child sub feature.
|
interface |
RibParentBuilder
Represents a Die Rib Parent sub feature.
|
interface |
RotorBuilder
Represents a CAM Rotor feature builder.
|
interface |
RotorSectionBuilder
Represents a Rotor Section sub feature.
|
interface |
SpringbackCompensationBuilder
Used to create or edit a
SpringbackCompensation feature. |
interface |
SteelInsertBuilder
Represents a Steel Insert feature builder.
|
interface |
SteelInsertSectionBuilder
Represents a Steel Insert Section sub feature.
|
interface |
SteelInsertSegmentChildBuilder
Represents a Steel Insert Segment Child sub feature.
|
interface |
SteelInsertSegmentParentBuilder
Represents a Steel Insert Segment Parent sub feature.
|
interface |
ThroatChildBuilder
Represents a Die Throat Child sub feature.
|
interface |
ThroatParentBuilder
Represents a Die Throat Parent sub feature.
|
interface |
TrimFlangeDieAssistantBuilder
Represents a
TrimFlangeDieAssistantBuilder
To create a new instance of this class, use DieCollection.trimFlangeDieAssistant(nxopen.features.Feature) Created in NX5.0.0 |
interface |
TrimLineDevelopmentBuilder
Represents a
TrimLineDevelopment builder
To create a new instance of this class, use DieCollection.createTrimLineDevelopmentBuilder(nxopen.features.Feature) Created in NX6.0.0 |
interface |
TrimTaskBuilder
Represents a Trim Task feature builder.
|
interface |
UncutRegionsBuilder
Calculates the uncut regions of a curve given a radius value for the cut tool.
|
interface |
WearPlateLocChildBuilder
Represents a Die Wear Plate Locator sub feature.
|
interface |
WearPlateLocParentBuilder
Represents a Die Wear Plate Locator sub feature.
|
Modifier and Type | Interface and Description |
---|---|
interface |
Background
Represents a
Background
Background defines how background pixels are displayed. |
interface |
BoundedGridBuilder
Represents the builder for creating a bounded grid
BoundedGrid . |
interface |
CameraBuilder
Represents a
CameraBuilder
Cameras are not supported in KF. |
interface |
CgfxAttributeValueColor3Builder
Deprecated.
Deprecated in NX10.0.0. No alternative provided for this class.
|
interface |
CgfxAttributeValueColor4Builder
Deprecated.
Deprecated in NX10.0.0. No alternative provided for this class.
|
interface |
CgfxAttributeValueFileBuilder
Deprecated.
Deprecated in NX10.0.0. No alternative provided for this class.
|
interface |
CgfxAttributeValueFloat3Builder
Deprecated.
Deprecated in NX10.0.0. No alternative provided for this class.
|
interface |
CgfxAttributeValueFloat4Builder
Deprecated.
Deprecated in NX10.0.0. No alternative provided for this class.
|
interface |
CgfxAttributeValueIntegerBuilder
Deprecated.
Deprecated in NX10.0.0. No alternative provided for this class.
|
interface |
CgfxAttributeValueNumberBuilder
Deprecated.
Deprecated in NX10.0.0. No alternative provided for this class.
|
interface |
CgfxMattexBuilder
Deprecated.
Deprecated in NX10.0.0. No alternative provided for this class.
|
interface |
DatumPlaneGridBuilder
Represents the builder for adding a datum plane grid
DatumPlaneGrid
to a datum plane. |
interface |
DecalBuilder
Represents a
DecalBuilder
This class is restricted to being called from a program running during an Interactive NX session. |
interface |
DynamicSectionBuilder
Represents a Dynamic Section Builder used for creating sections.
|
interface |
EnvironmentBuilder
Represents a
EnvironmentBuilder
This controls environment image, tone mapping, and stages. |
interface |
ExtractScene
Represents a
ExtractScene
This class is restricted to being called from a program running during an Interactive NX session. |
interface |
FacetSettingsBuilder
Represents a
FacetSettingsBuilder
Facet Settings are not supported in KF. |
interface |
GlobalIlluminationBuilder
Represents a
GlobalIlluminationBuilder . |
interface |
GridBuilder
Represents the builder for adding a grid
Grid
This is an abstract class, and cannot be instantiated. |
interface |
Image
Represents a
Image
This class is restricted to being called from a program running during an Interactive NX session. |
interface |
ImageBaseBuilder
Represents a
ImageBaseBuilder . |
interface |
ImageBasedLighting
Represents a
ImageBasedLighting
Image-based Lighting (IBL) is only performed in High Quality Image
renderings. |
interface |
IrayPlusMaterialEditorBuilder
Represents a
IrayPlusMaterialEditorBuilder
This class is restricted to being called from a program running during an Interactive NX session. |
interface |
IrayPlusSimpleMaterialEditorBuilder
Represents a
IrayPlusSimpleMaterialEditorBuilder
This class is restricted to being called from a program running during an Interactive NX session. |
interface |
IRayPlusStudioEditorBuilder
Represents a
IRayPlusStudioEditorBuilder . |
interface |
LightBuilder
Represents a
LightBuilder
This class is restricted to being called from a program running during an Interactive NX session. |
interface |
Lighting
Represents a
Lighting
Lights are used to illuminate the scene in Shaded and Studio rendering
styles, as well as in High Quality Images. |
interface |
NonProportionalZoom
Provides non-proportional zoom capability
To create a new instance of this class, use ViewCollection.createNonProportionalZoom() Default values. |
interface |
PerspectiveOptionsBuilder
Represents a
PerspectiveOptionsBuilder
Cameras are not supported in KF. |
interface |
PlanarShipGridBuilder
Represents a
PlanarShipGrid builder. |
interface |
PlaneGridBuilder
Represents the builder for adding a bounded grid
PlaneGrid
to a plane. |
interface |
PointCloudBuilder
Represents a
PointCloudBuilder . |
interface |
RasterImageBuilder
Represents a
RasterImageBuilder . |
interface |
RayTracedStudioBuilder
Represents a
RayTracedStudioBuilder . |
interface |
RayTracedStudioEditorBuilder
Represents a
RayTracedStudioEditorBuilder . |
interface |
Reflection
Represents a
Reflection
Reflection defines the source of reflection in shiny objects for Studio
rendering style or High Quality Images. |
interface |
SaveImageFileBrowserBuilder
Represents a
SaveImageFileBrowserBuilder . |
interface |
Scene
Represents a
Scene
A scene is comprised of background, stage, reflection, lights and
image-based lighting subobjects. |
interface |
SelPref
Represents a
SelPref
To obtain a instance of this class use SelPrefCollection.createSelPref() Created in NX5.0.0 |
interface |
Shadows
Represents a
Shadows
This class is restricted to being called from a program running during an Interactive NX session. |
interface |
Stage
Represents a
Stage
A stage is an environment cube, a six-sided room, that can have between
one and six visible walls. |
interface |
StudioImageCaptureBuilder
Represents a
StudioImageCaptureBuilder
This class is restricted to being called from a program running during an Interactive NX session. |
interface |
TrueShadingBuilder
Represents a
TrueShading builder To create a new instance of this class, use TrueShadingCollection.createTrueShadingBuilder(nxopen.display.TrueShading) Created in NX6.0.0 |
interface |
TrueStudioBuilder
The TrueStudioBuillder manages Advanced Studio visualization display
To create a new instance of this class, use TrueStudioCollection.createTrueStudioBuilder(nxopen.display.TrueStudio) Created in NX8.0.0 |
interface |
Wall
Represents a
Wall
This class is restricted to being called from a program running during an Interactive NX session. |
Modifier and Type | Interface and Description |
---|---|
interface |
AnnotateViewsBuilder
This class is used to annotate views based on the knowledge fusion rules.
|
interface |
AutomationPreferencesBuilder
the builder for Drafting Automation Preferences
To create a new instance of this class, use AutomationManager.createPreferencesBuilder() Created in NX8.0.0 |
interface |
BaseEditSettingsBuilder
Represents a
BaseEditSettingsBuilder . |
interface |
CutCopyPasteBuilder
Represents a paste in Drafting.
|
interface |
DistributeAnnotationsBuilder
This class is used to distribute annotations associated to a view.
|
interface |
DrawingCreationWizardBuilder
Represents a
DrawingCreationWizardBuilder . |
interface |
MoveToDrawingViewBuilder
This builder allows the user to extract contents from a sheet and transfer them to a new Drawing
view, also provide some other options for view creation
To create a new instance of this class, use DraftingApplicationManager.createMoveToDrawingViewBuilder() Default values. |
interface |
PreferencesBuilder
Represents a
PreferencesBuilder builder To create a new instance of this class, use SettingsManager.createPreferencesBuilder() Default values. |
interface |
RulesBuilder
This class is used to specify knowledge fusion rules in a drawing template.
|
interface |
SmashDrawingViewBuilder
This builder allows the user to break a Drawing View into its parts and delete the Drawing View
To create a new instance of this class, use DraftingApplicationManager.createSmashDrawingViewBuilder() Created in NX8.5.0 |
interface |
SpecifyRuleBuilder
This class is used to specify knowledge fusion rule for a note object in a drawing template.
|
Modifier and Type | Interface and Description |
---|---|
interface |
AddObjectsToRegionBuilder
Creates the builder for associating the symbols from library to the region
To create a new instance of this class, use DrawingRegionCollection.createAddObjectsToRegionBuilder() Created in NX8.0.0 |
interface |
AddRemoveBoxViewBuilder
This class is used to construct the add remove box view Builder
To create a new instance of this class, use DraftingViewCollection.createAddRemoveBoxViewBuilder(nxopen.drawings.DraftingView) Created in NX8.0.0 |
interface |
BaseViewBuilder
Represents a
BaseView builder To create a new instance of this class, use DraftingViewCollection.createBaseViewBuilder(nxopen.drawings.BaseView) Default values. |
interface |
BordersAndZonesBuilder
Builder for creating Borders and Zones.
|
interface |
BrokenViewBuilder
This class is used to construct the broken view Builder
To create a new instance of this class, use DraftingViewCollection.createBrokenViewBuilder(nxopen.drawings.ViewBreak) Default values. |
interface |
CompareReportBuilder
Represents a
CompareReportBuilder builder To create a new instance of this class, use DrawingCompareManager.createCompareReportBuilder() Created in NX7.5.0 |
interface |
ConvertDraftingContentsBuilder
Represents a
ConvertDraftingContentsBuilder . |
interface |
CustomViewSettingsBuilder
this class represents the "this class represents Drawings.CustomViewSettingsBuilder.
|
interface |
DetailViewBuilder
Represents a
DetailView . |
interface |
DraftingDrawingSheetBuilder
Represents a Builder for creating
DraftingDrawingSheet s To create a new instance of this class, use DraftingDrawingSheetCollection.createDraftingDrawingSheetBuilder(nxopen.drawings.DraftingDrawingSheet) Created in NX12.0.0 |
interface |
DrawingCompareSettingsBuilder
Deprecated.
Deprecated in NX11.0.0. Use
TrackDrawingChangesGeneralBuilder for General Builder and TrackDrawingChangesReportFilterBuilder for Report Filter Builder
|
interface |
DrawingRegionBuilder
Represents a Drawing Region Builder
To create a new instance of this class, use DrawingRegionCollection.createDrawingRegionBuilder(nxopen.drawings.DrawingRegion) Default values. |
interface |
DrawingSheetBuilder
Represents a
DrawingSheetBuilder
This class was made abstract in NX12 and the creator (JA_DRAWING_SHEET_COLLECTION_drawing_sheet_builder) was deprecated Created in NX5.0.0 |
interface |
DrawingsPropertiesBuilder
Represents an
DrawingsPropertiesBuilder to be used for marking the
component as secondary geometry. |
interface |
DrawingViewBuilder
This builder allows the user to create a Drawing View
To create a new instance of this class, use DraftingViewCollection.createDrawingViewBuilder(nxopen.drawings.DrawingView) Default values. |
interface |
EditSectionLineSettingsBuilder
Represents a
EditSectionLineSettingsBuilder builder. |
interface |
EditViewLabelSettingsBuilder
Represents a
EditViewLabelSettingsBuilder builder. |
interface |
EditViewSettingsBuilder
Represents a
EditViewSettingsBuilder builder. |
interface |
MarkAsTemplateBuilder
Represents a
MarkAsTemplateBuilder
To create a new instance of this class, use DraftingManager.createMarkAsTemplateBuilder() Created in NX8.0.0 |
interface |
ProjectedViewBuilder
Represents a
ProjectedView builder To create a new instance of this class, use DraftingViewCollection.createProjectedViewBuilder(nxopen.drawings.ProjectedView) Default values. |
interface |
RefineDisplayBuilder
Represents a
RefineDisplayBuilder . |
interface |
RemoveObjectsBuilder
Creates the builder for removing associated objects from the region
To create a new instance of this class, use DrawingRegionCollection.createRemoveObjectsBuilder() Created in NX8.0.0 |
interface |
ReportBuilder
Represents a
ReportBuilder . |
interface |
SecondaryGeometryInViewsBuilder
This builder allows the user to select existing view(s) in which
component objects can be designated as secondary or primary
To create a new instance of this class, use DraftingViewCollection.createSecondaryGeometryInViewsBuilder() Default values. |
interface |
SectionInViewBuilder
This builder allows the user to select a view in which component or
solid body objects can be designated as section, non-sectioned, or neither
To create a new instance of this class, use DraftingViewCollection.createSectionInViewBuilder() Default values. |
interface |
SectionLineBuilder
Deprecated.
Deprecated in NX10.0.0. Use
SectionViewBuilder.SectionLineType
|
interface |
SectionLineStyleBuilder
Represents a Drawings.SectionLineStyleBuiler.
|
interface |
SectionViewBuilder
Represents a
SectionView builder To create a new instance of this class, use DraftingViewCollection.createSectionViewBuilder(nxopen.NXObject) Default values. |
interface |
SelectRegionBuilder
Creates the builder for associating the objects from the screen
To create a new instance of this class, use DrawingRegionCollection.createSelectRegionBuilder() Created in NX8.0.0 |
interface |
SheetZoneReferenceBuilder
builder for creating sheet zone refernce control strings based on the selected attribute and view
To create a new instance of this class, use DraftingManager.createSheetZoneReferenceBuilder() Created in NX8.0.0 |
interface |
SketchSectionLineBuilder
Represents a
SectionLine builder To create a new instance of this class, use SectionLineCollection.createSketchSectionLineBuilder(nxopen.drawings.SectionLine) Default values. |
interface |
StandardViewsBuilder
This builder allows the user to create a Drawing View
To create a new instance of this class, use DraftingViewCollection.createStandardViewsBuilder() Default values. |
interface |
UpdateViewsBuilder
Represents a
UpdateViewsBuilder
To create a new instance of this class, use DraftingViewCollection.createUpdateViewsBuilder() Created in NX5.0.0 |
interface |
ViewAlignmentBuilder
Represents a
ViewAlignmentBuilder .This class is used to construct the view alignment Builder To create a new instance of this class, use ViewAlignmentCollection.createViewAlignmentBuilder() Default values. |
interface |
ViewCopyTo3dBuilder
Represents a
ViewCopyTo3dBuilder . |
interface |
ViewCreationWizardBuilder
This builder allows the user to create a Drawing View
To create a new instance of this class, use DraftingViewCollection.createViewCreationWizardBuilder() Default values. |
interface |
ViewProjectionBuilder
Represents a
ViewProjectionBuilder . |
Modifier and Type | Interface and Description |
---|---|
interface |
AdjustMinimumRadiusBuilder
Represents a
AdjustMinimumRadiusBuilder . |
interface |
BestFitAlignBuilder
This class performs the best fit alignment between objects
To create a new instance of this class, use FacetedBodyCollection.createBestFitAlignBuilder() Created in NX6.0.0 |
interface |
BridgeFacetBodyBuilder
Represents a
BridgeFacetBodyBuilder
It bridges two disjoint NX facet bodies. |
interface |
CleanupFacetBodyBuilder
Represents a
CleanupFacetBodyBuilder builder. |
interface |
CombineFacetBodyBuilder
Represents a
CombineFacetBodyBuilder builder. |
interface |
ConvertFacetBodyBuilder
Represents a
ConvertFacetBodyBuilder builder. |
interface |
CreateTransitionBuilder
Represents a
CreateTransitionBuilder builder. |
interface |
CurvatureBuilder
Represents a
CurvatureBuilder . |
interface |
DecimateFacetBodyBuilder
Represents a
DecimateFacetBodyBuilder . |
interface |
DetectPrimitivesBuilder
This class manages the primitive shape detection for a facet body.
|
interface |
DivideFacetFaceBuilder
Represents a
DivideFacetFaceBuilder . |
interface |
ExtrudeFacetBodyBuilder
Represents a
ExtrudeFacetBodyBuilder
It extrudes a NX Facet Body. |
interface |
ExtrudeProfileBuilder
Represents a
ExtrudeProfileBuilder
It extrudes 3D closed profile between planes. |
interface |
FacetBodyFromBodyBuilder
Represents a
FacetBodyFromBodyBuilder builder. |
interface |
FeatureExtractionBuilder
Represents a
FeatureExtractionBuilder
It extracts feature lines or separates regions of different curvature
from a facet body based on the curvature map. |
interface |
FillHoleBuilder
This class finds and fills holes to a prescribed boundary smoothness condition.
|
interface |
LocalOffsetBuilder
Represents a
LocalOffsetBuilder . |
interface |
MergeFacetBodyBuilder
Represents a
MergeFacetBodyBuilder
It merges two overlapping NX facet bodies. |
interface |
MergeFacetFacesBuilder
Represents a
MergeFacetFacesBuilder builder
To create a new instance of this class, use FacetModelingCollection.createMergeFacetFacesBuilder() Default values. |
interface |
MultiPatchAlignmentBuilder
Aligns multiple facet bodies to one another without using reference points.
|
interface |
PaintBrushBuilder
This class manages the paint brush utility for a facet body.
|
interface |
PaintFacetBodyBuilder
This class manages the color painting on a facet body.
|
interface |
PolygonModelingBuilder
Represents a
PolygonModelingBuilder builder. |
interface |
RemoveUndercutsBuilder
This class handles the removal of undercut regions of a facet body.
|
interface |
SewFacetBodyBuilder
Represents a
SewFacetBodyBuilder
It sews two touching NX facet bodies. |
interface |
SmoothFacetBodyBuilder
Represents a
SmoothFacetBodyBuilder . |
interface |
SnipFacetBodyBuilder
Represents a SnipFacetBody builder
To create a new instance of this class, use FacetedBodyCollection.createSnipFacetBodyBuilder() Default values. |
interface |
STLImportBuilder
The STL file import builder.
|
interface |
SubdivideFacetBodyBuilder
This class provides functionality to subdivide the polygons to increase the density of the facet bodies.
|
Modifier and Type | Interface and Description |
---|---|
interface |
AdaptiveShellBuilder
Represents a
AdaptiveShell builder To create a new instance of this class, use FeatureCollection.createAdaptiveShellBuilder(nxopen.features.AdaptiveShell) Default values. |
interface |
AdmMoveFaceBuilder
Represents a
AdmMoveFace builder
To create a new instance of this class, use FeatureCollection.createAdmMoveFaceBuilder(nxopen.features.AdmMoveFace) Default values. |
interface |
AdmOffsetRegionBuilder
Represents a
AdmOffsetRegion builder
To create a new instance of this class, use FeatureCollection.createAdmOffsetRegionBuilder(nxopen.features.AdmOffsetRegion) Default values. |
interface |
AdmResizeFaceBuilder
Represents a builder for a resize face feature.
|
interface |
AeroFlangeBuilder
Represents a
AeroFlange builder
To create a new instance of this class, use AeroCollection.createAeroFlangeBuilder(nxopen.features.AeroFlange) Default values. |
interface |
AeroRibBuilder
Represents a
AeroRib builder
To create a new instance of this class, use AeroCollection.createAeroRibBuilder(nxopen.features.AeroRib) Default values. |
interface |
AestheticFaceBlendBuilder
This class will provide ability to create aesthetically pleasing blend surfaces on sheet and solid bodies.
|
interface |
AnalyzePocketBuilder
Represents a
AnalyzePocket builder for Analyze Pocket feature. |
interface |
AngularDimBuilder
Represents a
AngularDim builder
To create a new instance of this class, use FeatureCollection.createAngularDimensionBuilder(nxopen.features.AngularDim) Created in NX6.0.0 |
interface |
AOCSBuilder
Represents a Offset In Face(aka Associative offset curve on face)feature builder.
|
interface |
AssemblyCutBuilder
Represents a
AssemblyCut builder. |
interface |
AssociativeArcBuilder
Represents a
AssociativeArc builder To create a new instance of this class, use BaseFeatureCollection.createAssociativeArcBuilder(nxopen.features.AssociativeArc) Default values. |
interface |
AssociativeLineBuilder
Represents a
AssociativeLine builder
To create a new instance of this class, use BaseFeatureCollection.createAssociativeLineBuilder(nxopen.features.AssociativeLine) Default values. |
interface |
BlendCornerBuilder
Represents a
BlendCorner builder. |
interface |
BlendPocketBuilder
Represents a
BlendPocket builder for Blend Pocket feature. |
interface |
BlockFeatureBuilder
Represents a block feature builder.
|
interface |
BodyByEquationBuilder
Represents a
BodyByEquation builder. |
interface |
BooleanBuilder
Represents a boolean feature builder.
|
interface |
BoundedPlaneBuilder
Represents a
BoundedPlane builder
To create a new instance of this class, use FeatureCollection.createBoundedPlaneBuilder(nxopen.features.BoundedPlane) Created in NX6.0.0 |
interface |
BridgeCurveBuilder
Deprecated.
Deprecated in NX8.5.0. Use
BridgeCurveBuilderEx instead.
|
interface |
BridgeCurveBuilderEx
Represents a
BridgeCurve builder. |
interface |
BridgeSurfaceBuilder
Represents a
BridgeSurface builder
To create a new instance of this class, use FeatureCollection.createBridgeSurfaceBuilder(nxopen.features.BridgeSurface) Default values. |
interface |
ChamferBuilder
Represents the chamfer builder data.
|
interface |
ChangeShellThicknessBuilder
Represents a
ChangeShellThickness builder To create a new instance of this class, use FeatureCollection.createChangeShellThicknessBuilder(nxopen.features.ChangeShellThickness) Default values. |
interface |
CircularBlendCurveBuilder
Represents a
CircularBlendCurve builder
To create a new instance of this class, use FeatureCollection.createCircularBlendCurveBuilder(nxopen.features.CircularBlendCurve) Default values. |
interface |
CoaxialBuilder
Represents a
Coaxial builder
To create a new instance of this class, use FeatureCollection.createCoaxialBuilder(nxopen.features.Coaxial) Default values. |
interface |
ColorFaceBuilder
Represents a
ColorFaceBuilder
To create a new instance of this class, use FeatureCollection.createColorFaceBuilder() Created in NX7.0.0 |
interface |
ColorFeatureBuilder
Represents a
ColorFeatureBuilder
Represents a color feature builder. |
interface |
ColorFeatureGroupBuilder
Represents a
ColorFeatureGroupBuilder
Represents a color feature group builder. |
interface |
CombinedProjectionBuilder
Represents a
CombinedProjection builder
To create a new instance of this class, use FeatureCollection.createCombinedProjectionBuilder(nxopen.features.CombinedProjection) Default values. |
interface |
CombineSheetsBuilder
Represents a combine sheets builder.
|
interface |
CompositeCurveBuilder
Represents a
CompositeCurve builder. |
interface |
ConcaveFacesBuilder
Represents a Concave Faces builder.
|
interface |
ConeBuilder
Represents a builder for a cone feature.
|
interface |
CoplanarBuilder
Represents a
Coplanar builder
To create a new instance of this class, use FeatureCollection.createCoplanarBuilder(nxopen.features.Feature) Default values. |
interface |
CopyFaceBuilder
Represents a builder for a copy face feature.
|
interface |
CopyPasteBuilder
Represents a
CopyPasteBuilder
To create a new instance of this class, use FeatureCollection.createCopyPasteBuilder2(nxopen.NXObject[]) Created in NX6.0.0 |
interface |
CurveLengthBuilder
Represents the CurveLength builder
To create a new instance of this class, use FeatureCollection.createCurvelengthBuilder(nxopen.features.Feature) Default values. |
interface |
CurveOnSurfaceBuilder
Curve On Surface builder class.
|
interface |
CustomFeatureBuilder
Represents a
CustomFeature builder
To create a new instance of this class, use FeatureCollection.createCustomFeatureBuilder(nxopen.features.Feature) Created in NX11.0.0 |
interface |
CutFaceBuilder
Represents a builder for a cut face feature.
|
interface |
CylinderBuilder
Represents a
Cylinder builder
To create a new instance of this class, use FeatureCollection.createCylinderBuilder(nxopen.features.Feature) Default values. |
interface |
DatumAxisBuilder
Represents a datum axis feature builder.
|
interface |
DatumBuilder
Represents a builder for datum features.
|
interface |
DatumCsysBuilder
Represents a datum csys builder
To create a new instance of this class, use FeatureCollection.createDatumCsysBuilder(nxopen.features.Feature) Created in NX4.0.0 |
interface |
DatumPlaneBuilder
Represents a datum plane feature builder.
|
interface |
DeformDefinitionBuilder
Used as a place holder for selected member features, expressions and external references for a deform
definition feature record that is to be created.
|
interface |
DeleteBodyBuilder
Represents a
DeleteBody builder for Delete Body feature. |
interface |
DeleteCurveBuilder
Represents a
DeleteCurve builder
To create a new instance of this class, use SynchronousCurveCollection.createDeleteCurveBuilder(nxopen.features.DeleteCurve) Default values. |
interface |
DeleteEdgeBuilder
Represents a builder for a delete edge feature.
|
interface |
DeleteFaceBuilder
Represents a builder for a delete face feature, don't use it until nx502.
|
interface |
DimensionBuilder
Represents a
DimensionBuilder The sub-class should create an instance of corresponding object Default values. |
interface |
DivideCurveBuilder
Represents a builder for non-associative divide curve operation.
|
interface |
DividefaceBuilder
Represents a divide face builder.
|
interface |
DraftBodyBuilder
Represents a
DraftBody builder
To create a new instance of this class, use FeatureCollection.createDraftBodyBuilder(nxopen.features.Feature) Default values. |
interface |
DraftBuilder
Represents a Draft Feature Builder that creates or edits a draft (Old name Taper) feature.
|
interface |
DraftingSplineBuilder
Sketch Spline builder class.
|
interface |
EdgeBlendBuilder
Represents a Edge Blend builder.
|
interface |
EdgeSymmetryBuilder
Represents a
EdgeSymmetry builder
To create a new instance of this class, use FeatureCollection.createEdgeSymmetryBuilder(nxopen.features.Feature) Default values. |
interface |
EditCrossSectionBuilder
Represents a
EditCrossSection builder
To create a new instance of this class, use FeatureCollection.createEditCrossSectionBuilder(nxopen.features.EditCrossSection) Default values. |
interface |
EditDimensionBuilder
Represents a builder of edit feature dimensions
To create a new instance of this class, use FeatureCollection.createEditDimensionBuilder() Default values. |
interface |
EmbeddedOperationBuilder
Represents an EmbeddedOperationBuilder
This is an abstract class, and cannot be instantiated. |
interface |
EmbedManagerBuilder
Used to manage the interaction to Embed, Replace, Rename and Delete embedded
file information in the part file.
|
interface |
EmbossBodyBuilder
Represents a
EmbossBody builder
To create a new instance of this class, use FeatureCollection.createEmbossBodyBuilder(nxopen.features.EmbossBody) Default values. |
interface |
EmbossBuilder
Represents an emboss feature builder that creates or edits an emboss feature.
|
interface |
EnlargeBuilder
Represents a
Enlarge builder. |
interface |
ExtendSheetBuilder
Represents a
ExtendSheet builder
To create a new instance of this class, use TrimFeatureCollection.createExtendSheetBuilder(nxopen.features.ExtendSheet) Default values. |
interface |
ExtensionBuilder
Represents a
Extension builder
To create a new instance of this class, use FeatureCollection.createExtensionBuilder(nxopen.features.Extension) Default values. |
interface |
ExtractFaceBuilder
Represents a
ExtractFace builder. |
interface |
ExtrudeBuilder
Represents a extrude feature builder.
|
interface |
FaceBlendBuilder
Represents a face blend builder.
|
interface |
FeatureBuilder
Represents a Feature Builder to be used in the creation and modification of features.
|
interface |
FeatureReplayBuilder
Represents a
FeatureReplayBuilder builder. |
interface |
FitCurveBuilder
Represents a
FitCurve builder
To create a new instance of this class, use FeatureCollection.createFitCurveBuilder(nxopen.features.FitCurve) Default values. |
interface |
FitSurfaceBuilder
This class will provide the ability to fit surfaces through facet bodies or point sets/groups.
|
interface |
FixedBuilder
Represents a builder for a fixed feature.
|
interface |
FlatteningAndFormingBuilder
This class will provide the solution to unwrap 3D non-planar, curved geometry to a 2D plane.
|
interface |
FlatteningAndFormingBuilderEx
This class will provide the solution to unwrap 3D non-planar, curved geometry to a 2D plane.
|
interface |
FlowBlendBuilder
Represents a
FlowBlend builder
To create a new instance of this class, use FeatureCollection.createFlowBlendBuilder(nxopen.features.FlowBlend) Default values. |
interface |
FreeTransformerBuilder
Represents a
FreeTransformer builder
To create a new instance of this class, use FeatureCollection.createFreeTransformerBuilder(nxopen.features.Feature) Default values. |
interface |
GeneralConicBuilder
Represents a
GeneralConic builder
To create a new instance of this class, use FeatureCollection.createGeneralConicBuilder(nxopen.features.GeneralConic) Default values. |
interface |
GeodesicChamferBuilder
Represents a
GeodesicChamfer builder for GeodesicChamfer command. |
interface |
GeodesicFilletBuilder
Represents a
GeodesicFillet builder for GeodesicFillet command. |
interface |
GeodesicIntersectBuilder
Represents a
GeodesicIntersect builder for Intersect command. |
interface |
GeodesicLineBuilder
Represents a
GeodesicLine builder for GeodesicLine command. |
interface |
GeodesicOffsetBuilder
Represents a
GeodesicOffset builder for Offset command. |
interface |
GeodesicPointBuilder
Represents a
GeodesicPoint builder for GeodesicPoint command. |
interface |
GeodesicProjectBuilder
Represents a
GeodesicProject builder for Project command. |
interface |
GeodesicResetBuilder
Represents a
GeodesicResetBuilder To create a new instance of this class, use GeodesicSketchCollection.createGeodesicResetBuilder() Created in NX10.0.0 |
interface |
GeodesicSketchBuilder
Represents a
GeodesicSketch builder for GeodesicSketch feature. |
interface |
GeodesicTrimBuilder
Represents a
GeodesicSketch builder for GeodesicTrim command. |
interface |
GeomcopyBuilder
Represents a
Geomcopy builder
To create a new instance of this class, use FeatureCollection.createGeomcopyBuilder(nxopen.features.Feature) Default values. |
interface |
GlobalShapingBuilder
Represents a
GlobalShaping builder
To create a new instance of this class, use FeatureCollection.createGlobalShapingBuilder(nxopen.features.GlobalShaping) Default values. |
interface |
GlobalShapingCurveOffsetBuilder
The class used to define the curves and offset laws needed for the target curve list.
|
interface |
GroupFaceBuilder
Represents a builder for a group face feature.
|
interface |
GuidedExtensionBuilderEx
Represents a
GuidedExtensionEx builder
To create a new instance of this class, use FeatureCollection.createGuidedExtensionBuilderEx(nxopen.features.Feature) Default values. |
interface |
HelixBuilder
Represents a
Helix builder
To create a new instance of this class, use FeatureCollection.createHelixBuilder(nxopen.features.Helix) Default values. |
interface |
HolePackageBuilder
Represents a
HolePackage builder. |
interface |
HumanBuilder
Represents a human feature.
|
interface |
IFormBuilder
Represents a
IForm builder. |
interface |
InstanceFeatureBuilder
instance feature builder
To create a new instance of this class, use FeatureCollection.createInstanceFeatureBuilder(nxopen.features.InstanceFeature) Default values. |
interface |
IntersectionCurveBuilder
Represents a
IntersectionCurveBuilder builder. |
interface |
IsoclineCurveBuilder
Represents a
IsoclineCurve builder
To create a new instance of this class, use FreeformCurveCollection.createIsoclineCurveBuilder(nxopen.features.IsoclineCurve) Default values. |
interface |
IsolateFeatureBuilder
Represents a
IsolateFeature builder To create a new instance of this class, use FeatureCollection.createIsolateFeatureBuilder(nxopen.features.IsolateFeature) Created in NX8.5.0 |
interface |
IsoparametricCurvesBuilder
Represents a
IsoparametricCurves builder
To create a new instance of this class, use FeatureCollection.createIsoparametricCurvesBuilder(nxopen.features.IsoparametricCurves) Default values. |
interface |
JoinCurvesBuilder
Represents a
JoinCurves builder. |
interface |
LabelChamferBuilder
Represents a
LabelChamfer builder
To create a new instance of this class, use FeatureCollection.createLabelChamferBuilder(nxopen.features.LabelChamfer) Created in NX7.0.0 |
interface |
LabelNotchBlendBuilder
Represents a
LabelNotchBlend builder
To create a new instance of this class, use FeatureCollection.createLabelNotchBlendBuilder(nxopen.features.LabelNotchBlend) Created in NX8.0.0 |
interface |
LatticeBuilder
Represents a Features.Lattice builder
To create a new instance of this class, use LatticeFeatureCollection.createLatticeBuilder(nxopen.features.Lattice) Default values. |
interface |
LawCurveBuilder
Represents a
LawCurve builder
To create a new instance of this class, use FeatureCollection.createLawCurveBuilder(nxopen.features.LawCurve) Default values. |
interface |
LawExtensionBuilder
Represents a
LawExtension builder
To create a new instance of this class, use FeatureCollection.createLawExtensionBuilder(nxopen.features.LawExtension) Default values. |
interface |
LawExtensionBuilderEx
Represents a
LawExtensionEx builder
To create a new instance of this class, use FeatureCollection.createLawExtensionBuilderEx(nxopen.features.Feature) Default values. |
interface |
LinkedFacetBuilder
Represents a
LinkedFacet builder
To create a new instance of this class, use FeatureCollection.createLinkedFacetBuilder(nxopen.features.LinkedFacet) Created in NX6.0.0 |
interface |
LocalScaleCurveBuilder
Represents a
LocalScaleCurve builder
To create a new instance of this class, use SynchronousCurveCollection.createLocalScaleCurveBuilder(nxopen.features.LocalScaleCurve) Default values. |
interface |
MakeOffsetBuilder
Represents a
MakeOffset builder
To create a new instance of this class, use FeatureCollection.createMakeOffsetBuilder(nxopen.features.MakeOffset) Default values. |
interface |
MakeSolidBuilder
Represents a
MakeSolid builder. |
interface |
MapleBuilder
Deprecated.
Deprecated in NX12.0.0. Use
MathIntegrationBuilder instead.
|
interface |
MasterCutBuilder
Represents a master cut feature builder that creates, inquires, or edits a master cut feature associated with a Cut View.
|
interface |
MatchEdgeBuilder
Represents a
MatchEdge builder
To create a new instance of this class, use FeatureCollection.createMatchEdgeBuilder(nxopen.features.MatchEdge) Default values. |
interface |
MathIntegrationBuilder
Represents a
MathIntegration builder
To create a new instance of this class, use FeatureCollection.createMathIntegrationBuilder(nxopen.features.MathIntegration) Default values. |
interface |
MeshSurfaceBuilder
Mesh Surface Builder class.
|
interface |
MeshTransformerBuilder
Represents a
MeshTransformer builder
To create a new instance of this class, use FeatureCollection.createMeshTransformerBuilder(nxopen.features.Feature) Default values. |
interface |
MidSurfaceByFacePairsBuilder
Represents a
MidSurfaceByFacePairs builder
To create a new instance of this class, use FeatureCollection.createMidSurfaceByFacePairsBuilder(nxopen.features.Feature) Default values. |
interface |
MidSurfaceUserDefinedBuilder
Represents a
MidSurfaceUserDefined builder
To create a new instance of this class, use FeatureCollection.createMidSurfaceUserDefinedBuilder(nxopen.features.MidSurfaceUserDefined) Default values. |
interface |
MirrorBodyBuilder
Represents a
MirrorBody builder. |
interface |
MirrorCurveBuilder
Represents a
MirrorCurve builder
To create a new instance of this class, use FeatureCollection.createMirrorCurveBuilder(nxopen.features.Feature) Default values. |
interface |
MirrorFaceBuilder
Represents a
MirrorFace builder
To create a new instance of this class, use FeatureCollection.createMirrorFaceBuilder(nxopen.features.Feature) Default values. |
interface |
MirrorFeatureBuilder
Represents a
MirrorFeature builder
To create a new instance of this class, use FeatureCollection.createMirrorFeatureBuilder(nxopen.features.Feature) Created in NX5.0.0 |
interface |
MoveCurveBuilder
Represents a
MoveCurve builder
To create a new instance of this class, use SynchronousCurveCollection.createMoveCurveBuilder(nxopen.features.MoveCurve) Default values. |
interface |
MoveEdgeBuilder
Represents a
MoveEdge builder
To create a new instance of this class, use SynchronousEdgeCollection.createMoveEdgeBuilder(nxopen.features.MoveEdge) Default values. |
interface |
MoveFaceBuilder
Represents a builder for a move face feature, don't use it until nx502.
|
interface |
MoveObjectBuilder
Represents a
MoveObjectBuilder . |
interface |
NSidedSurfaceBuilder
Represents a
NSidedSurface builder
To create a new instance of this class, use FeatureCollection.createNSidedSurfaceBuilder(nxopen.features.NSidedSurface) Default values. |
interface |
Offset3DCurveBuilder
Represents a
Offset3DCurveBuilder builder which implements
offset curves along a direction with offset distance in three dimension. |
interface |
OffsetCurveBuilder
Represents a
OffsetCurve builder To create a new instance of this class, use FeatureCollection.createOffsetCurveBuilder(nxopen.features.Feature) Default values. |
interface |
OffsetEdgeBuilder
Represents a
OffsetEdge builder
To create a new instance of this class, use SynchronousEdgeCollection.createOffsetEdgeBuilder(nxopen.features.OffsetEdge) Created in NX9.0.0 |
interface |
OffsetEmbossBuilder
Represents a builder for an offset emboss feature.
|
interface |
OffsetFaceBuilder
Represents a
OffsetFace builder
To create a new instance of this class, use FeatureCollection.createOffsetFaceBuilder(nxopen.features.Feature) Default values. |
interface |
OffsetFacetBodyBuilder
Represents a
OffsetFacetBody . |
interface |
OffsetMoveCurveBuilder
Represents a
OffsetMoveCurve builder
To create a new instance of this class, use SynchronousCurveCollection.createOffsetMoveCurveBuilder(nxopen.features.OffsetMoveCurve) Default values. |
interface |
OffsetRegionBuilder
Represents a builder for an offset region feature, don't use it until nx502.
|
interface |
OffsetSurfaceBuilder
This class represents a offset surface builder, used for creating or editing an
offset surface feature.
|
interface |
OptimizeCurveBuilder
Represents a builder of optimize curve
To create a new instance of this class, use FeatureCollection.createOptimizeCurveBuilder() Default values. |
interface |
OptimizeFaceBuilder
Represents a builder of optimize face
To create a new instance of this class, use FeatureCollection.createOptimizeFaceBuilder() Default values. |
interface |
OvercrownBuilder
Represents a Overcrown Builder
To create an instance of this this class use FeatureCollection.createOvercrownFeatureBuilder(nxopen.features.Feature) Created in NX4.0.0 |
interface |
PaintParametersBuilder
Represents a paint feature parameters builder.
|
interface |
ParallelBuilder
Represents a
Parallel builder. |
interface |
PartModuleBuilder
Represents a
PartModule builder To create a new instance of this class, use FeatureCollection.createPartModuleBuilder(nxopen.features.PartModule) Created in NX8.0.0 |
interface |
PasteFaceBuilder
Represents a builder for a paste face feature.
|
interface |
PatchBuilder
Represents a
PatchBuilder
Lets you use a sheet body to replace some of the faces of a solid body. |
interface |
PatchOpeningsBuilder
Represents a builder for a Patch Openings feature.
|
interface |
PatternFaceBuilder
Represents a builder for a pattern face feature, don't use it until nx502.
|
interface |
PatternFaceFeatureBuilder
Represents a builder for a pattern face feature, post NX9.
|
interface |
PatternFeatureBuilder
Represents a
PatternFeature builder
To create a new instance of this class, use FeatureCollection.createPatternFeatureBuilder(nxopen.features.Feature) Default values. |
interface |
PatternGeometryBuilder
This class represents the builder to be used to create Pattern Geometry features.
|
interface |
PerpendicularBuilder
Represents a
Perpendicular builder
To create a new instance of this class, use FeatureCollection.createPerpendicularBuilder(nxopen.features.Perpendicular) Default values. |
interface |
PointFeatureBuilder
Represents a
PointFeatureBuilder builder
To create a new instance of this class, use BaseFeatureCollection.createPointFeatureBuilder(nxopen.features.Feature) Created in NX5.0.0 |
interface |
PointSetBuilder
Represents a
PointSetBuilder . |
interface |
PoleSmoothingBuilder
Represents a
PoleSmoothing builder
To create a new instance of this class, use FeatureCollection.createPoleSmoothingBuilder(nxopen.features.PoleSmoothing) Default values. |
interface |
PolylineBuilder
Polyline builder class.
|
interface |
ProjectCurveBuilder
Represents a
ProjectCurve builder. |
interface |
PromotionBuilder
Represents a
Promotion builder. |
interface |
PullFaceBuilder
Represents a
PullFace builder
To create a new instance of this class, use FeatureCollection.createPullFaceBuilder(nxopen.features.PullFace) Default values. |
interface |
RapidSurfaceBuilder
Represents a
RapidSurface builder
To create a new instance of this class, use FeatureCollection.createRapidSurfaceBuilder(nxopen.features.RapidSurface) Default values. |
interface |
ReferenceMapperBuilder
Represents a
ReferenceMapperBuilder
It is used in the context of Boolean Target/Tool Mapping. |
interface |
RefitFaceBuilder
Represents a
RefitFace builder
To create a new instance of this class, use FeatureCollection.createRefitFaceBuilder(nxopen.features.RefitFace) Default values. |
interface |
RegionListItemBuilder
Represents a
RegionListItemBuilder builder
To create a new instance of this class, use VarOffsetFaceBuilder.createRegionListItem() Default values. |
interface |
RemoveParametersBuilder
Represents a
RemoveParametersBuilder . |
interface |
ReorderBlendsBuilder
Represents a
ReorderBlends builder
To create a new instance of this class, use FeatureCollection.createReorderBlendsBuilder(nxopen.features.ReorderBlends) Created in NX7.5.1 |
interface |
ReplaceBlendBuilder
Represents a builder for a Replace Blend feature.
|
interface |
ReplaceFaceBuilder
Represents a builder for a replace face feature, don't use it until nx502.
|
interface |
ReplaceFeatureBuilder
Represents a replace feature builder.
|
interface |
ResizeBlendBuilder
Represents a builder for a resize blend feature, don't use it until nx502.
|
interface |
ResizeChamferBuilder
Represents a
ResizeChamfer builder
To create a new instance of this class, use FeatureCollection.createResizeChamferBuilder(nxopen.features.ResizeChamfer) Default values. |
interface |
ResizeChamferCurveBuilder
Represents a
ResizeChamferCurve builder
To create a new instance of this class, use SynchronousCurveCollection.createResizeChamferCurveBuilder(nxopen.features.ResizeChamferCurve) Created in NX10.0.0 |
interface |
ResizeCurveBuilder
Represents a
ResizeCurve builder
To create a new instance of this class, use SynchronousCurveCollection.createResizeCurveBuilder(nxopen.features.ResizeCurve) Default values. |
interface |
ResizeFaceBuilder
Represents a builder for a resize face feature, don't use it until nx502.
|
interface |
ResizePlaneBuilder
Represents a
ResizePlane builder
To create a new instance of this class, use FeatureCollection.createResizePlaneBuilder(nxopen.features.Feature) Created in NX6.0.3 |
interface |
RevolveBuilder
Represents a revolve builder.
|
interface |
RibbonBuilder
Represents a
Ribbon builder
To create a new instance of this class, use FeatureCollection.createRibbonBuilder(nxopen.features.Feature) Default values. |
interface |
RibBuilder
Represents a
Rib builder
To create a new instance of this class, use DesignFeatureCollection.createRibBuilder(nxopen.features.Rib) Default values. |
interface |
RPOBuilder
Represents a RPO builder.
|
interface |
RuledBuilder
Represents a
Ruled builder
To create a new instance of this class, use FeatureCollection.createRuledBuilder(nxopen.features.Feature) Default values. |
interface |
ScaleBuilder
Represents a
Scale builder. |
interface |
ScaleCurveBuilder
Represents a
ScaleCurveBuilder builder
To create a new instance of this class, use CurveFeatureCollection.createScaleCurveBuilder(nxopen.features.ScaleCurve) Default values. |
interface |
SectionCurveBuilder
Represents a
SectionCurve builder. |
interface |
SectionEditBuilder
Represents a
SectionEdit builder
To create a new instance of this class, use FeatureCollection.createSectionEditBuilder(nxopen.features.SectionEdit) Created in NX6.0.0 |
interface |
SectionInertiaAnalysisBuilder
Represents a
SectionInertiaAnalysis builder
To create a new instance of this class, use FeatureCollection.createSectionInertiaAnalysisBuilder(nxopen.features.SectionInertiaAnalysis) Default values. |
interface |
SectionSurfaceBuilder
Deprecated.
Deprecated in NX9.0.0. Use
SectionSurfaceBuilderEx instead.
|
interface |
SectionSurfaceBuilderEx
Represents a
SectionSurface builder. |
interface |
ServiceOrientedBodyFeatureBuilder
Represents a
ServiceOrientedBodyFeature builder
Not support KF. |
interface |
ServiceOrientedFeatureCurveBuilder
Represents a
ServiceOrientedFeatureCurve builder
Not support KF. |
interface |
SewBuilder
Represents a
Sew builder. |
interface |
ShelfBuilder
Represents a
Shelf builder
To create a new instance of this class, use AeroCollection.createShelfBuilder(nxopen.features.Shelf) Default values. |
interface |
ShellBuilder
Represents the Shell feature builder.
|
interface |
ShellFaceBuilder
Represents a
ShellFace builder To create a new instance of this class, use FeatureCollection.createShellFaceBuilder(nxopen.features.ShellFace) Default values. |
interface |
ShowRelatedFacesBuilder
Represents a builder for a Show Related Faces.
|
interface |
SilhouetteFlangeBuilder
Represents a
SilhouetteFlange builder
To create a new instance of this class, use FeatureCollection.createSilhouetteFlangeBuilder(nxopen.features.SilhouetteFlange) Default values. |
interface |
SketchFitCurveBuilder
Sketch Fit Curve builder class.
|
interface |
SketchSplineBuilder
Sketch Spline builder class.
|
interface |
SmoothCurveStringBuilder
Represents a
SmoothCurveString builder
To create a new instance of this class, use FreeformCurveCollection.createSmoothCurveStringBuilder(nxopen.features.SmoothCurveString) Default values. |
interface |
SmoothSplineBuilder
Represents a
SmoothSpline builder
To create a new instance of this class, use FeatureCollection.createSmoothSplineBuilder(nxopen.features.SmoothSpline) Default values. |
interface |
SnipSurfaceBuilder
Represents a
SnipSurface builder
To create a new instance of this class, use FeatureCollection.createSnipSurfaceBuilder(nxopen.features.SnipSurface) Default values. |
interface |
SphereBuilder
Represents a
Sphere builder. |
interface |
SphericalCornerBuilder
Represents a
SphericalCorner builder
To create a new instance of this class, use FeatureCollection.createSphericalCornerBuilder(nxopen.features.SphericalCorner) Default values. |
interface |
SpineCurveBuilder
Represents a
SpineCurve builder
To create a new instance of this class, use FreeformCurveCollection.createSpineCurveBuilder(nxopen.features.SpineCurve) Default values. |
interface |
SplitBodyBuilder
Represents a
SplitBody builder. |
interface |
StepBuilder
Represents a
Step builder
To create a new instance of this class, use AeroCollection.createStepBuilder(nxopen.features.Step) Default values. |
interface |
StudioSplineBuilder
Deprecated.
Deprecated in NX8.0.0. Use
StudioSplineBuilderEx instead.
|
interface |
StudioSplineBuilderEx
Studio Spline builder class.
|
interface |
StudioSurfaceBuilder
Represents a
StudioSurface builder
To create a new instance of this class, use FeatureCollection.createStudioSurfaceBuilder(nxopen.features.Feature) Default values. |
interface |
StudioSurfaceBuilderEx
Represents a
StudioSurfaceEx builder
To create a new instance of this class, use FreeformSurfaceCollection.createStudioSurfaceBuilderEx(nxopen.features.Feature) Default values. |
interface |
StudioXformBuilder
Deprecated.
Deprecated in NX8.5.0. Use
StudioXformBuilderEx instead.
|
interface |
StudioXformBuilderEx
Represents a
StudioXform builder To create a new instance of this class, use FeatureCollection.createStudioXformBuilderEx(nxopen.features.StudioXform) Default values. |
interface |
StyledBlendBuilder
Represents a
StyledBlend builder
To create a new instance of this class, use FeatureCollection.createStyledBlendBuilder(nxopen.features.StyledBlend) Default values. |
interface |
StyledCornerBuilder
Represents a
StyledCorner builder
To create a new instance of this class, use FeatureCollection.createStyledCornerBuilder(nxopen.features.StyledCorner) Default values. |
interface |
StyledSweepBuilder
Represents a
StyledSweep builder
To create a new instance of this class, use FeatureCollection.createStyledSweepBuilder(nxopen.features.Feature) Default values. |
interface |
SweepAlongGuideBuilder
Represents a
SweepAlongGuide builder
To create a new instance of this class, use FeatureCollection.createSweepAlongGuideBuilder(nxopen.features.SweepAlongGuide) Default values. |
interface |
SweptBuilder
Represents a
Swept builder
To create a new instance of this class, use FeatureCollection.createSweptBuilder(nxopen.features.Swept) Default values. |
interface |
SweptVolumeBuilder
Represents a
SweptVolume builder
To create a new instance of this class, use SweepFeatureCollection.createSweptVolumeBuilder(nxopen.features.SweptVolume) Default values. |
interface |
SymmetricBuilder
Represents a
Symmetric builder To create a new instance of this class, use FeatureCollection.createSymmetricBuilder(nxopen.features.Symmetric) Default values. |
interface |
TangentBuilder
Represents a
Tangent builder
To create a new instance of this class, use FeatureCollection.createTangentBuilder(nxopen.features.Tangent) Default values. |
interface |
TextBuilder
Represents a
Text builder
To create a new instance of this class, use FeatureCollection.createTextBuilder(nxopen.features.Text) Default values. |
interface |
ThickenBuilder
Represents a builder for a
Thicken feature. |
interface |
ThroughCurveMeshBuilder
Represents a
ThroughCurveMesh builder. |
interface |
ThroughCurvesBuilder
Represents a
ThroughCurves builder. |
interface |
ToolingBoxBuilder
Represents a
ToolingBox builder
To create a new instance of this class, use ToolingFeatureCollection.createToolingBoxBuilder(nxopen.features.ToolingBox) Default values. |
interface |
TrimAndExtendBuilder
Represents a
TrimAndExtend builder
To create a new instance of this class, use TrimFeatureCollection.createTrimAndExtendBuilder(nxopen.features.TrimAndExtend) Default values. |
interface |
TrimBody2Builder
Represents a
TrimBody2 builder for Trim Body
feature. |
interface |
TrimBodyBuilder
Represents the trim body feature builder.
|
interface |
TrimCornerBuilder
Represents a builder for non-associative trim corner operation.
|
interface |
TrimCurve2Builder
Represents a
TrimCurve2 builder
To create a new instance of this class, use FeatureCollection.createTrimCurve2FeatureBuilder(nxopen.features.TrimCurve2) Default values. |
interface |
TrimCurveBuilder
Represents a
TrimCurve builder
To create a new instance of this class, use FeatureCollection.createTrimCurveBuilder(nxopen.features.TrimCurve) Default values. |
interface |
TrimExtendBuilder
Represents a
TrimExtend builder. |
interface |
TrimSheetBuilder
Represents a
TrimSheet builder. |
interface |
TubeBuilder
Represents a
Tube builder
To create a new instance of this class, use FeatureCollection.createTubeBuilder(nxopen.features.Feature) Default values. |
interface |
UnsewBuilder
Represents a
Unsew builder
To create a new instance of this class, use FeatureCollection.createUnsewBuilder(nxopen.features.Unsew) Default values. |
interface |
UntrimBuilder
Represents a
Untrim builder
To create a new instance of this class, use FeatureCollection.createUntrimBuilder(nxopen.features.Feature) Created in NX5.0.0 |
interface |
UserDefinedObjectFeatureBuilder
Represents a user defined object feature builder.
|
interface |
VariableOffsetBuilder
Represents a
VariableOffset builder
To create a new instance of this class, use FeatureCollection.createVariableOffsetBuilder(nxopen.features.VariableOffset) Default values. |
interface |
VarOffsetFaceBuilder
Represents a
VarOffsetFace builder
To create a new instance of this class, use FeatureCollection.createVarOffsetFaceBuilder(nxopen.features.VarOffsetFace) Default values. |
interface |
VarsweepBuilder
Represents a Variational Sweep feature builder.
|
interface |
VirtualBlendEdgeBuilder
Represents a
VirtualBlendEdgeBuilder To create a new instance of this class, use FeatureCollection.createVirtualBlendEdgeBuilder() Created in NX7.0.1 |
interface |
VirtualCurveBuilder
Represents a
VirtualCurve builder
To create a new instance of this class, use FeatureCollection.createVirtualCurveBuilder(nxopen.features.VirtualCurve) Default values. |
interface |
WaveDatumBuilder
Represents a Wave Datum builder.
|
interface |
WaveInterfaceLinkerBuilder
Represents a WaveInterfacelinker Feature builder
To create a new instance of this class, use BaseFeatureCollection.createWaveInterfaceLinkerBuilder(nxopen.features.Feature) Default values. |
interface |
WaveLinkBuilder
Represents a Wavelink Feature builder.
|
interface |
WavePointBuilder
Represents a
Feature builder
To create a new instance of this class, use FeatureCollection.createWavePointBuilder(nxopen.features.Feature) Default values. |
interface |
WaveRoutingBuilder
Represents a
WaveRoutingBuilder
To create a new instance of this class, use FeatureCollection.createWaveRoutingBuilder(nxopen.features.Feature) Default values. |
interface |
WaveSketchBuilder
Represents a WaveSketchBuilder.
|
interface |
WrapBuilder
Represents a
WrapUnwrap builder. |
interface |
WrapGeometryBuilder
Represents a
WrapGeometry builder
To create a new instance of this class, use FeatureCollection.createWrapGeometryBuilder(nxopen.features.WrapGeometry) Default values. |
Modifier and Type | Interface and Description |
---|---|
interface |
AdvancedFlangeBuilder
Represents a Sheetmetal Advanced Flange builder class.
|
interface |
AeroFlatPatternBuilder
Represents a Flat Pattern feature builder.
|
interface |
AeroFlatSolidBuilder
Represents a Flat As Solid feature builder.
|
interface |
AeroJoggleBuilder
Represents a Aerospace Sheet Metal Joggle Builder.
|
interface |
AeroLighteningCutoutBuilder
Represents a
AeroLighteningCutoutBuilder
To create a new instance of this class, use AeroSheetmetalManager.createAeroLighteningCutoutBuilder(nxopen.features.Feature) Default values. |
interface |
AeroReformBuilder
Represents a Aerospace Sheet Metal REFORM Builder.
|
interface |
AeroUnformBuilder
Represents a Aerospace Sheet Metal UNFORM Builder.
|
interface |
BeadBuilder
Represents a Bead feature builder.
|
interface |
BendBuilder
Represents a Bend feature builder.
|
interface |
BendListBuilder
Represents a Sheetmetal Flat Pattern bend list builder class.
|
interface |
BendListItemBuilder
Represents a Sheetmetal Flat Pattern bend list item builder class.
|
interface |
BendTaperBuilder
Represents a Bend Taper feature builder
To create a new instance of this class, use SheetmetalManager.createBendTaperBuilder(nxopen.features.Feature) Default values. |
interface |
BreakCornerBuilder
Represents a break corner feature builder.
|
interface |
BridgeTransitionBuilder
Represents a Bridge Transition builder
To create a new instance of this class, use SheetmetalManager.createBridgeTransitionBuilder(nxopen.features.Feature) Created in NX5.0.2 |
interface |
CleanUpUtilityBuilder
Represents a Clean-Up Utility builder builder
To create a new instance of this class, use SheetmetalManager.createCleanUpUtilityBuilder() Default values. |
interface |
ClosedCornerBuilder
Represents a Closed corner feature builder.
|
interface |
ContourFlangeBuilder
Represents a Contour Flange feature builder.
|
interface |
ConvertToSheetmetalBuilder
This is the feature builder for the convert to sheetmetal feature.
|
interface |
DimpleBuilder
Represents a Dimple feature builder.
|
interface |
DrawnCutoutBuilder
Represents a Drawn Cutout feature builder.
|
interface |
EdgeRipBuilder
Represents a Edge Rip feature builder.
|
interface |
EditBendBuilder
Represents a
EditBend builder
To create a new instance of this class, use SheetmetalManager.createEditBendBuilder(nxopen.features.Feature) Created in NX7.5.0 |
interface |
EditCornerBuilder
Represents a
EditCornerBuilder
To create a new instance of this class, use SheetmetalManager.createEditCornerBuilder() Default values. |
interface |
ExportFlatPatternBuilder
Represents a Export flat pattern builder.
|
interface |
FlangeBuilder
Represents a Flange feature builder.
|
interface |
FlatPatternBuilder
Represents a Flat Pattern feature builder.
|
interface |
FlatSolidBuilder
Represents a Flat As Solid feature builder.
|
interface |
FlexibleCableBuilder
Represents a Flexible Cable feature builder.
|
interface |
GussetBuilder
Represents a NX Sheet Metal
Gusset builder
To create a new instance of this class, use SheetmetalManager.createGussetBuilder(nxopen.features.Feature) Default values. |
interface |
HemFlangeBuilder
Represents a
HemFlange builder
To create a new instance of this class, use SheetmetalManager.createHemFlangeFeatureBuilder(nxopen.features.Feature) Created in NX5.0.0 |
interface |
JogBuilder
Represents a Jog feature builder.
|
interface |
JoggleBuilder
Represents a Sheetmetal joggle builder class.
|
interface |
LighteningCutoutBuilder
Represents a
LighteningCutout builder To create a new instance of this class, use SheetmetalManager.createLighteningCutoutBuilder(nxopen.features.sheetmetal.LighteningCutout) Default values. |
interface |
LoftedFlangeBuilder
Represents a Lofted Flange feature builder.
|
interface |
LouverBuilder
Represents a louver feature builder.
|
interface |
MetaformBuilder
Represents a
Metaform builder
To create a new instance of this class, use SheetmetalManager.createMetaformBuilder(nxopen.features.Feature) Default values. |
interface |
MigratedPanelBuilder
Represents an I-DEAS Migrated Panel feature builder
This builder cannot be instantiated separately. |
interface |
MultiFlangeBuilder
Represents a
MultiFlange builder
To create a new instance of this class, use SheetmetalManager.createMultiFlangeBuilder(nxopen.features.sheetmetal.MultiFlange) Created in NX12.0.0 |
interface |
NormalCutoutBuilder
Represents a NormalCutout feature builder.
|
interface |
RebendBuilder
The Rebend feature class.
|
interface |
ResizeBendAngleBuilder
Represents a
ResizeBendAngle builder
To create a new instance of this class, use SheetmetalManager.createResizeBendAngleBuilder(nxopen.features.Feature) Created in NX5.0.0 |
interface |
ResizeBendRadiusBuilder
Represents a ResizeBendRadius feature builder.
|
interface |
ResizeNeutralFactorBuilder
Represents a Resize Neutral Factor Builder
To create a new instance of this class, use SheetmetalManager.createResizeNeutralFactorBuilder(nxopen.features.Feature) Created in NX5.0.0 |
interface |
SheetmetalBaseBuilder
Represents a Sheet Metal Feature Builder to be used in the creation and modification of features.
|
interface |
SheetMetalFromSolidBuilder
Represents a
SheetMetalFromSolid builder
(Sheet Metal from Solid). |
interface |
SolidPunchBuilder
Represents a
SolidPunchBuilder
To create a new instance of this class, use SheetmetalManager.createSolidPunchBuilder(nxopen.features.Feature) Created in NX5.0.0 |
interface |
TabBuilder
Represents a Tab feature builder.
|
interface |
ThreeBendCornerBuilder
The Three Bend Corner feature class.
|
interface |
UnbendBuilder
The Unbend feature class.
|
Modifier and Type | Interface and Description |
---|---|
interface |
AddDataSetBuilder
This class is used to add a dataset to an item in Teamcenter
To create a new instance of this class, use ShipCollection.createAddDataSetBuilder() Created in NX12.0.0 |
interface |
AlongGuideCutBuilder
Represents a
AlongGuideCut builder
To create a new instance of this class, use ShipCollection.createAlongGuideCutBuilder(nxopen.features.shipdesign.AlongGuideCut) Default values. |
interface |
AnchorPoint
Represents a
AnchorPoint builder. |
interface |
BracketBuilder
Represents a
Bracket builder. |
interface |
BuiltUpManModeBuilder
This class allows you to set the NX Ship BuiltUp Profile Manufacturing Mode for
one or more components.
|
interface |
BulkHeadsBuilder
Represents a
BulkHeads builder
To create a new instance of this class, use ShipCollection.createBulkHeadsBuilder(nxopen.features.Feature) Created in NX5.0.0 |
interface |
CollarPlateBuilder
Represents a
CollarPlate builder. |
interface |
CompareModeBuilder
This class is used to compare between the two Shipbuilding modes of Design and Manufacturing.
|
interface |
ConceptFromSpreadsheetBuilder
Represents a
ConceptFromSpreadsheet builder
To create a new instance of this class, use ShipCollection.createConceptFromSpreadsheetBuilder(nxopen.features.shipdesign.ConceptFromSpreadsheet) Default values. |
interface |
CopyObjectsBuilder
Represents a
CopyObjectsBuilder
It is used in Ship Building Application. |
interface |
CopyPasteNewBuilder
Represents a
CopyPasteNewBuilder
It is used in Ship Building Application. |
interface |
CornerCutBuilder
Builder used to create or edit a
CornerCut feature. |
interface |
CornerCutListItemBuilder
Used to supply the list of corner cut locations and seam curves to the
CornerCutBuilder
To create a new instance of this class, use ShipCollection.createCornerCutListitemBuilder() Created in NX8.5.0 |
interface |
CustomBracketBuilder
Represents a
CustomBracket builder
To create a new instance of this class, use ShipCollection.createCustomBracketBuilder(nxopen.features.Feature) Default values. |
interface |
Cutout2Builder
Represents a
Cutout2 builder
To create a new instance of this class, use ShipCollection.createCutout2Builder(nxopen.features.shipdesign.Cutout2) Default values. |
interface |
CuttingSideFacesBuilder
Used to create a
CuttingSideFacesBuilder which
is used to attribute the cutting side, and opposing cutting side, faces on the plate bodies. |
interface |
DeckBuilder
This class is used to create or edit a
Deck feature. |
interface |
DecksBuilder
Represents a
Decks builder. |
interface |
DeleteSeamBuilder
Used to create a
DeleteSeamBuilder which
is used to delete the seams from the ship structural components. |
interface |
DisplaySolidBuilder
This class is used to identify ship structure that is to have a temporary
solid display built for it.
|
interface |
DivideBuilder
Represents a
Divide builder which is used to edit
all divide features. |
interface |
DrawingAnnotationBuilder
This builder allows you to define the drawing annotation information.
|
interface |
DvToMvMappingBuilder
Represents a
DvToMvMapping builder. |
interface |
EdgeCutBuilder
Represents a
EdgeCut builder. |
interface |
EdgeReinforcementBuilder
Represents a
EdgeReinforcement builder which is used to create or edit a edge reinforcement system feature. |
interface |
EditBoundaryBuilder
Used to create a
EditBoundaryBuilder which
is used to change the boundaries and split knuckle locations of profile systems. |
interface |
EditContextAttributesBuilder
Represents the class Features.ShipDesign.EditContextAttributesBuilder which is used to
edit the context attributes on the basic design features.
|
interface |
EditStockBuilder
Used to create a
EditStockBuilder which
is used to change the stock information on the basic design features. |
interface |
EditWeldingBuilder
Used to create a
EditWeldingBuilder which
is used to change the welding characteristics on the seams in the plate systems. |
interface |
EndCutBuilder
Represents a
EndCut builder. |
interface |
ExamineSteelFeatureBuilder
Represents the examine steel feature builder to examine steel feature.
|
interface |
ExcessMaterialBuilder
Represents a
ExcessMaterial builder. |
interface |
ExpansionDrawingBuilder
Represents a
ExpansionDrawingBuilder . |
interface |
FeatureParmsBuilder
This class is used to create or edit the information shared among all Ship Design features.
|
interface |
FeaturesBatchOperationBuilder
Use this to cycle through the assembly components and perform the operation globally on the specified feature type.
|
interface |
FeaturesToTagBuilder
This class is used to add an attribute to profile features that have been modified by
the user to display a 'Metal to Metal' design 'feature'.
|
interface |
FilterBuilder
A builder that allows the user to define common properties of ship objects and then
add objects of similar properties to the select object list.
|
interface |
FrameBarOutBuilder
Represents a
FrameBarOut builder. |
interface |
GeneralArrangementViewBuilder
This builder allows you to define the general arrangement view information.
|
interface |
GenericPlateSystemBuilder
This class is used to create or edit a
GenericPlateSystem feature. |
interface |
HullBuilder
This class is used to create or edit a
Hull feature. |
interface |
InsertFramesBuilder
Represents a
InsertFramesBuilder builder
To create a new instance of this class, use ShipCollection.createInsertFramesBuilder(nxopen.features.Feature) Created in NX5.0.0 |
interface |
InsertSheetBodyBuilder
Represents a
InsertSheetBody builder
To create a new instance of this class, use ShipCollection.createInsertSheetBodyBuilder(nxopen.features.shipdesign.InsertSheetBody) Created in NX5.0.0 |
interface |
InteractiveAnnotationBuilder
Represents a
InteractiveAnnotationBuilder builder . |
interface |
InverseBendingLinesBuilder
Used to create or edit a
InverseBendingLines feature. |
interface |
ItFramesBuilder
Represents a
ItFrames builder
To create a new instance of this class, use ShipCollection.createItFramesBuilder(nxopen.features.Feature) Created in NX5.0.0 |
interface |
KnuckledProfilesBuilder
Represents a
KnuckledProfiles builder
To create a new instance of this class, use ShipCollection.createKnuckledProfilesBuilder(nxopen.features.shipdesign.KnuckledProfiles) Created in NX5.0.3 |
interface |
LabellingRoomsBuilder
Represents a
LabellingRoomsBuilder builder
To create a new instance of this class, use ShipCollection.createLabellingRoomsBuilder() Created in NX12.0.0 |
interface |
LongitudinalBulkheadBuilder
This class is used to create or edit a
LongitudinalBulkhead feature. |
interface |
MainDimensionsBuilder
Represents a
MainDimensions builder. |
interface |
ManufacturingAssemblyNavigatorBuilder
This class is used to define Manufacturing Assembly Structure.
|
interface |
ManufacturingDataBuilder
This class is used to generate Manufacturing data.
|
interface |
ManufacturingOutBuilder
Represents a
ManufacturingOut builder
To create a new instance of this class, use ShipCollection.createManufacturingOutBuilder(nxopen.features.Feature) Created in NX5.0.0 |
interface |
ManufacturingPreparationBuilder
This builder is used to adds attributes to the part and body identifying manufacturing related data.
|
interface |
ManufacturingStockBuilder
Represents a
ManufacturingStockBuilder builder. |
interface |
MarkingLineBuilder
Represents a MarkingLine Feature builder
To create a new instance of this class, use ShipCollection.createMarkingLineBuilder(nxopen.features.Feature) Created in NX5.0.0 |
interface |
MarkingLineDesignBuilder
Represents a new MarkingLine Feature builder.
|
interface |
MaterialAllowanceBuilder
Represents the material allowance feature builder to examine steel feature.
|
interface |
MaterialEstimationBuilder
Represents the class Features.ShipDesign.MaterialEstimationBuilder which is used to
calculate the material estimation information.
|
interface |
MirrorShipStructureBuilder
Copy the selected parts (components) about the Mirror Plane with full model history and feature data.
|
interface |
MoveToContainerBuilder
This class is used to move detail design parts to a new ship container.
|
interface |
OrientationDefinitionBuilder
This class defines the top level object for use in definining the orientation
of stiffeners and edge reinforcements.
|
interface |
OrientationRegionItemBuilder
This class defines each region of the orientation.
|
interface |
PenetrationAssociationBuilder
Represents a
PenetrationAssociationBuilder builder To create a new instance of this class, use PenetrationRequestCollection.createPenetrationAssociationBuilder(boolean, nxopen.features.shipdesign.PenetrationRequest) Created in NX8.0.0 |
interface |
PenetrationCutoutBuilder
Represents a
PenetrationRequest builder To create a new instance of this class, use PenetrationRequestCollection.createPenetrationCutoutBuilder(nxopen.features.shipdesign.PenetrationRequest) Default values. |
interface |
PenetrationRequestBuilder
Represents a
PenetrationRequest builder To create a new instance of this class, use PenetrationRequestCollection.createPenetrationRequestBuilder(nxopen.features.shipdesign.PenetrationRequest) Default values. |
interface |
PenetrationRequestForCutoutBuilder
Represents a
PenetrationRequest builder To create a new instance of this class, use PenetrationRequestCollection.createPenetrationRequestForCutoutBuilder() Created in NX8.5.0 |
interface |
PenetrationReviewRequestBuilder
Represents a
PenetrationRequest builder To create a new instance of this class, use PenetrationRequestCollection.createPenetrationReviewRequestBuilder(nxopen.features.shipdesign.PenetrationRequest[]) Created in NX8.0.0 |
interface |
PillarBuilder
Represents a
Pillar builder
To create a new instance of this class, use ShipCollection.createPillarBuilder(nxopen.features.shipdesign.Pillar) Default values. |
interface |
PillarSystemBuilder
Represents a
PillarSystem builder which is used to create or edit a pillar system feature. |
interface |
PinJigBuilder
Represents a
PinJig builder
To create a new instance of this class, use ShipCollection.createPinJigBuilder(nxopen.features.shipdesign.PinJig) Created in NX10.0.0 |
interface |
PlaneListBuilder
This class is used to place a plane into a list.
|
interface |
PlateBoundaryOptionBuilder
Represents a
PlateBoundaryOptionBuilder builder to define the plate boundary option. |
interface |
PlateBuilder
Represents a
Plate builder. |
interface |
PlateChamferBuilder
Represents a
PlateChamfer builder. |
interface |
PlateDivideBuilder
Represents a
PlateDivide builder which is used to edit
a plate divide feature. |
interface |
PlatePreparationBuilder
Used to create or edit a
PlatePreparation feature. |
interface |
PlateStockBuilder
This builder allows you to define the stock information for plate system features in ship design.
|
interface |
PlateSystemBuilder
This class is used to create or edit the information shared between all the Basic Design plate system
features in the Ship Design application.
|
interface |
ProfileBuilder
Represents a
Profile builder
To create a new instance of this class, use ShipCollection.createProfileBuilder(nxopen.features.Feature) Default values. |
interface |
ProfileCutoutBuilder
Represents a
ProfileCutout builder
To create a new instance of this class, use ShipCollection.createProfileCutoutBuilder(nxopen.features.Feature) Default values. |
interface |
ProfileListBuilder
Represents a
ProfileList builder
To create a new instance of this class, use ShipCollection.createProfileListBuilder(nxopen.features.Feature) Created in NX5.0.0 |
interface |
ProfileSystemBuilder
This class is used to create or edit the information shared between all the Basic Design profile system
features in the Ship Design application.
|
interface |
ProfileTransitionBuilder
Builder used to create or edit a
ProfileTransition feature. |
interface |
ProjectSetupBuilder
Represents a project setup builder for ship.
|
interface |
QualifySketchBuilder
Represents a
QualifySketchBuilder builder. |
interface |
RebaseBuilder
This class is used to synchronize the end cuts from the ones in mfg group to design group.
|
interface |
ReferenceLineBuilder
Represents a
ReferenceLine builder. |
interface |
RemoveSplitBuilder
Represents a
RemoveSplitBuilder .This class is for removing split features. |
interface |
ReverseSplitBuilder
This class is used to provide the capability to reverse the split interaction between
ship structures.
|
interface |
RollingLineBuilder
Represents a
RollingLine builder. |
interface |
RoomAttributesBuilder
Represents a
RoomAttributesBuilder
It is used in Ship General Arrangement Application. |
interface |
RoomBuilder
Represents a room builder for general arrangement.
|
interface |
RoomContainerBuilder
Represents a
RoomContainerBuilder builder To create a new instance of this class, use ShipCollection.createRoomContainerBuilder() Created in NX12.0.0 |
interface |
RoomPanelBuilder
Represents a
RoomPanelBuilder builder
To create a new instance of this class, use ShipCollection.createRoomPanelBuilder() Default values. |
interface |
SeamBuilder
A
SeamBuilder used to create or edit a
ship design Seam feature. |
interface |
SectionDrawingBuilder
This builder allows you to define the section drawing information.
|
interface |
SectionEditorBuilder
Represents a
SectionEditorBuilder builder. |
interface |
SetModeBuilder
This class is used to set the mode to design or manufacturing.
|
interface |
ShellExpansionBuilder
Represents a
ShellExpansion builder
To create a new instance of this class, use ShipCollection.createShellExpansionBuilder(nxopen.features.shipdesign.ShellExpansion) Default values. |
interface |
ShellTemplateBuilder
Used to edit or create a
ShellTemplate feature. |
interface |
ShipAttributeHolder
Represents a
ShipAttributeHolder builder
This is an abstract class. |
interface |
ShipContainerBuilder
This class is used to specify the "container" part for the Ship Structures application, i.e., that
part that should have newly created Ship Stiffeners, Plates, Standard Parts added to it as assembly
components.
|
interface |
ShipCoordinatesBuilder
Represents a
ShipCoordinates builder
To create a new instance of this class, use ShipCollection.createShipCoordinatesBuilder() Default values. |
interface |
ShipCutoutBuilder
Represents a
ShipCutout builder
To create a new instance of this class, use ShipCollection.createShipCutoutBuilder(nxopen.features.shipdesign.ShipCutout) Default values. |
interface |
ShipDesignPreferencesBuilder
Represents a
ShipDesignPreferencesBuilder which
is used to change default object display settings for ship structures. |
interface |
ShipDesignVersionUpBuilder
Represents a
ShipDesignVersionUpBuilder builder. |
interface |
ShipEndCutBuilder
Represents a
ShipEndCut builder
To create a new instance of this class, use ShipCollection.createShipEndCutBuilder(nxopen.features.shipdesign.ShipEndCut) Default values. |
interface |
ShipFeatureConverter
This class is used to convert/upgrade legacy Ship Design features.
|
interface |
ShipFlatPatternBuilder
Deprecated.
Deprecated in NX8.0.0. Use
PlatePreparationBuilder instead.
|
interface |
ShipIntersectionsBuilder
Represents a
ShipIntersections builder
To create a new instance of this class, use ShipCollection.createShipIntersectionsBuilder(nxopen.features.shipdesign.ShipIntersections) Default values. |
interface |
ShipPreparationBuilder
Creates a builder used to prepare basic design data for meshing.
|
interface |
ShipProfileCutoutBuilder
Represents a
ProfileCutout builder for editing legacy(NX75) profile cutout feature. |
interface |
ShipSectionBuilder
Represents a
ShipSection builder
To create a new instance of this class, use ShipCollection.createShipSectionBuilder(nxopen.features.shipdesign.ShipSection) Default values. |
interface |
ShipTrimBodyBuilder
Represents a
ShipTrimBodyBuilder . |
interface |
SmartRuleBuilder
Represents a
SmartRule builder
To create a new instance of this class, use ShipCollection.createSmartRuleBuilder(nxopen.features.shipdesign.SmartRule) Created in NX8.0.0 |
interface |
SplitProfilePlateBuilder
Represents a
SplitProfilePlateBuilder .This class is for splitting ship profile/plate solidbodies
To create a new instance of this class, use ShipCollection.createSplitProfilePlateBuilder() Default values. |
interface |
SplitStandardPartBuilder
Represents a
SplitStandardPartBuilder .This class is for splitting ship standard part
To create a new instance of this class, use ShipCollection.createSplitStandardPartBuilder(nxopen.features.shipdesign.SplitStandardPart) Default values. |
interface |
StandardPartFrameworkBuilder
Represents the standard part framework builder to add or edit ship standard part.
|
interface |
StandardPartItemBuilder
Represents the ship standard part item builder.
|
interface |
SteelCollarPlateBuilder
Represents a
SteelCollarPlate builder
To create a new instance of this class, use ShipCollection.createSteelCollarPlateBuilder(nxopen.features.shipdesign.SteelCollarPlate) Default values. |
interface |
SteelDistributionBuilder
Represents a
SteelDistribution builder
To create a new instance of this class, use ShipCollection.createSteelDistributionBuilder(nxopen.features.Feature) Created in NX5.0.0 |
interface |
SteelFeatureSpreadsheetBuilder
Represents a
SteelFeatureSpreadsheetBuilder builder. |
interface |
SteelInsulationBuilder
Represents a builder that is used to create or edit a
SteelInsulation feature. |
interface |
SteelSupportBuilder
Represents a
SteelSupport builder
To create a new instance of this class, use ShipCollection.createSteelSupportBuilder(nxopen.features.shipdesign.SteelSupport) Default values. |
interface |
SteelVentHolesBuilder
Represents a
SteelVentHoles builder
To create a new instance of this class, use ShipCollection.createSteelVentHolesBuilder(nxopen.features.shipdesign.SteelVentHoles) Default values. |
interface |
StiffenerBuilder
Represents a
Stiffener builder
To create a new instance of this class, use ShipCollection.createStiffenerBuilder(nxopen.features.shipdesign.Stiffener) Default values. |
interface |
StiffenerSystemBuilder
This class is used to create or edit a
StiffenerSystem feature. |
interface |
SubSystemBuilder
This class is used to
edit the Sub System Definition of a
SubSystems feature. |
interface |
SubSystemsBuilder
This class is used to
edit a
SubSystems feature. |
interface |
SynchronizeDesignViewBuilder
This class is used to synchronize body features from design view to manufacturing view.
|
interface |
ThicknessDirectionBuilder
This class allows you to define the thickness direction for plate system features in Ship Basic Design and
and for grid planes in Ship Concept Design.
|
interface |
TraceLinesBuilder
Represents a
TraceLines builder
To create a new instance of this class, use ShipCollection.createTraceLinesBuilder(nxopen.features.shipdesign.TraceLines) Default values. |
interface |
TransFrameBuilder
Represents a
TransFrame builder
To create a new instance of this class, use ShipCollection.createTransFrameBuilder(nxopen.features.Feature) Created in NX5.0.0 |
interface |
TransitionBuilder
This is to create a
TransitionBuilder which is used to create Detail Design elements from Basic Design elements. |
interface |
TransverseBulkheadBuilder
This class is used to create or edit a
TransverseBulkhead feature. |
interface |
UnfoldedMinRecBuilder
Represents the class Features.ShipDesign.UnfoldedMinRecBuilder which is used to
calculate the unfolded minimum rectangle of ship basic design plates or standard parts.
|
interface |
UpdateShipLibraryBuilder
Represents a
UpdateShipLibrary builder
To create a new instance of this class, use ShipCollection.createUpdateShipLibraryBuilder(nxopen.features.Feature) Default values. |
interface |
ValidateModelBuilder
This is to create a
ValidateModelBuilder which is used to validate Basic Design Structures. |
interface |
VentHolesMarkingBuilder
Represents a
VentHolesMarking builder
To create a new instance of this class, use ShipCollection.createVentHolesMarkingBuilder(nxopen.features.shipdesign.VentHolesMarking) Created in NX5.0.3 |
interface |
VentilationHoles2Builder
Represents a
VentilationHoles2 builder
To create a new instance of this class, use ShipCollection.createVentilationHoles2Builder(nxopen.features.shipdesign.VentilationHoles2) Default values. |
interface |
VerifyPenetrationBuilder
Represents a
VerifyPenetrationBuilder builder To create a new instance of this class, use PenetrationRequestCollection.createVerifyPenetrationBuilder() Created in NX8.5.0 |
interface |
WeightAndCGBuilder
Represents the class Features.ShipDesign.WeightAndCGBuilder which is used to
calculate the weight and cg information.
|
interface |
WeldCut2Builder
Represents a
WeldCut2 builder
To create a new instance of this class, use ShipCollection.createWeldCut2Builder(nxopen.features.shipdesign.WeldCut2) Default values. |
interface |
WeldCutBuilder
Represents a
WeldCut builder
To create a new instance of this class, use ShipCollection.createWeldCutBuilder(nxopen.features.Feature) Default values. |
interface |
YFrameBuilder
Represents a
YFrameBuilder
To create a new instance of this class, use ShipCollection.createYFrameBuilder(nxopen.features.Feature) Created in NX5.0.0 |
interface |
ZFrameBuilder
Represents a
ZFrameBuilder
To create a new instance of this class, use ShipCollection.createZFrameBuilder(nxopen.features.Feature) Created in NX5.0.0 |
Modifier and Type | Interface and Description |
---|---|
interface |
FaceCharacteristicsBuilder
Represents a builder to be used to add face characteristics attributes and color to specified faces.
|
interface |
ProjectInitializationBuilder
This class is used to Initialize general arrangement project.
|
Modifier and Type | Interface and Description |
---|---|
interface |
AllAroundVisionBuilder
A
AllAroundVisionBuilder used to create or edit
a vehicle design AllAroundVision feature. |
interface |
BaseDataBuilder
Represents a
BaseDataBuilder . |
interface |
BaseDataDriverBuilder
Represents a
BaseDataDriverBuilder . |
interface |
BaseDataImportExportBuilder
Represents a
BaseDataImportExportBuilder
builder used to import and export expressions from and to a spreadsheet. |
interface |
BaseDataLoadingBuilder
Represents a
BaseDataLoadingBuilder . |
interface |
BaseDataLoadingWheelBuilder
Represents a
BaseDataLoadingWheelBuilder . |
interface |
BaseDataPassengerBuilder
Represents a
BaseDataPassengerBuilder . |
interface |
BaseDataSourceBuilder
Represents a
BaseDataSourceBuilder builder,
which set the base data source for work part in assembly context. |
interface |
BaseDataWheelBuilder
Represents a
BaseDataWheelBuilder . |
interface |
BumperPendulumBuilder
Represents a
BumperPendulum builder
To create a new instance of this class, use VehicleDesignCollection.createBumperPendulumBuilder(nxopen.features.vehicledesign.BumperPendulum) Default values. |
interface |
CloseRangeVisibilityBuilder
The builder to create close range visibility feature.
|
interface |
CrashBarrierBuilder
Represents a
CrashBarrier builder
to create and edit a vehicle design crash barrier. |
interface |
DynamicCurbBuilder
Represents a
DynamicCurb builder
To create a new instance of this class, use VehicleDesignCollection.createDynamicCurbBuilder(nxopen.features.vehicledesign.DynamicCurb) Default values. |
interface |
GroundClearanceBuilder
Represents a
GroundClearance builder. |
interface |
HeadImpactAPillarBuilder
Represents a
HeadImpactAPillarBuilder . |
interface |
HeadImpactBPillarBuilder
Represents a
HeadImpactBPillarBuilder . |
interface |
HeadImpactBuilder
Represents a
HeadImpactBuilder . |
interface |
HeadImpactFrontHeaderBuilder
Represents a
HeadImpactFrontHeaderBuilder . |
interface |
HeadImpactOPillarBuilder
Represents a
HeadImpactOPillarBuilder . |
interface |
HeadImpactOtherRailBuilder
Represents a
HeadImpactOtherRailBuilder . |
interface |
HeadImpactRearHeaderBuilder
Represents a
HeadImpactRearHeaderBuilder . |
interface |
HeadImpactRPillarBuilder
Represents a
HeadImpactRPillarBuilder . |
interface |
HeadImpactSideRailBuilder
Represents a
HeadImpactSideRailBuilder . |
interface |
HeadImpactUpperRoofBuilder
Represents a
HeadImpactUpperRoofBuilder . |
interface |
HoodVisibilityBuilder
Represents a
HoodVisibility builder
To create a new instance of this class, use VehicleDesignCollection.createHoodVisibilityBuilder(nxopen.features.vehicledesign.HoodVisibility) Default values. |
interface |
InnerAngleBuilder
Represents a
InnerAngle builder,
used to create or edit inner angle feature. |
interface |
ManikinBuilder
Represents a
Manikin builder
To create a new instance of this class, use VehicleDesignCollection.createManikinBuilder(nxopen.features.vehicledesign.Manikin) Default values. |
interface |
MirrorCertificationBuilder
A
MirrorCertificationBuilder used to create or edit
a vehicle design MirrorCertification feature. |
interface |
OilPanBuilder
Represents a
OilPan builder to create and edit a vehicle design oil pan. |
interface |
PedestrianProtectionBuilder
Represents a
PedestrianProtection builder
To create a new instance of this class, use VehicleDesignCollection.createPedestrianProtectionBuilder(nxopen.features.vehicledesign.PedestrianProtection) Default values. |
interface |
PendulumPlacementBuilder
This builder allows you to define the pendulum placement information for bumper pendulum features in vehicle design.
|
interface |
ReflectionDataBuilder
Represents a
ReflectionData builder
To create a new instance of this class, use VehicleDesignCollection.createReflectionDataBuilder(nxopen.features.vehicledesign.ReflectionData) Default values. |
interface |
SeatBeltAnchorageBuilder
Represents a
SeatBeltAnchorage builder
To create a new instance of this class, use VehicleDesignCollection.createSeatBeltAnchorageBuilder(nxopen.features.vehicledesign.SeatBeltAnchorage) Default values. |
interface |
SlopeBuilder
The builder to create slope feature.
|
interface |
StaticCurbBuilder
Represents a
StaticCurb builder
used to create or edit static curb feature
To create a new instance of this class, use VehicleDesignCollection.createStaticCurbBuilder(nxopen.features.vehicledesign.StaticCurb) Default values. |
interface |
TireEnvelopeBuilder
Represents a builder that is used to edit or create a
TireEnvelope . |
interface |
VehicleCoordinateSystemBuilder
Represents a
VehicleCoordinateSystem builder
To create a new instance of this class, use VehicleDesignCollection.createVehicleCoordinateSystemBuilder(nxopen.features.vehicledesign.VehicleCoordinateSystem) Created in NX7.0.0 |
interface |
VisionPlaneBuilder
Represents a
VisionPlane builder used to create or edit a Vision Plane. |
interface |
WheelCoveringBuilder
Represents a
WheelCovering
feature builder for wheel covering surface section checking. |
interface |
WheelFixingBuilder
Represents a
WheelFixing builder used to
create or edit a vehicle design wheel fixing. |
interface |
WindshieldDatumBuilder
Represents a
WindshieldDatum builder used to create or edit a Windshield Datum. |
Modifier and Type | Interface and Description |
---|---|
interface |
DisplayPropertiesBuilder
|
interface |
SpatialMapBuilder
|
Modifier and Type | Interface and Description |
---|---|
interface |
FaceAnnotationBuilder
Builder for Face Annotation functionality used in formboard.
|
interface |
FlipComponentBuilder
Builder for flip component operation used in formboard.
|
interface |
FormboardLayoutBuilder
Class that performs the "layout" of Formboard geometry.
|
interface |
LayoutLengthOptions
Defines the various options for determining the rounded lengths of
formboard geometry during the layout or update process.
|
interface |
ObjectAttributeReferenceBuilder
Builder for "object attribute" used in formboard which enbles user to create
annotation in drafting functionality.
|
interface |
OrientBranchBuilder
Builder for "Orient Branch" operation used in formboard.
|
interface |
PathLengthAnnotationBuilder
TODO Class documentation
To create a new instance of this class, use FormboardManager.createPathLengthAnnotationBuilder(nxopen.annotations.Annotation) Default values. |
interface |
ShapeSegmentBuilder
Builder for Face Annotation functionality used in formboard.
|
interface |
UpdateFormboardBuilder
Class that performs the "update" of Formboard geometry.
|
Modifier and Type | Interface and Description |
---|---|
interface |
BaseExplicitOrderBuilder
This is the
BaseExplicitOrderBuilder for the explicit order This is an abstract class, and cannot be instantiated. |
interface |
CopyCutBuilder
Represents a
CopyCutBuilder
To create a new instance of this class, use ClipboardOperationsManager.createCopyCutBuilder() Created in NX7.5.0 |
interface |
GenericFileNewBuilder
Represents a builder class that performs Generic File New operations.
|
interface |
IGenericFileNewApplicationBuilder
Represents the class Application Builder.
|
interface |
ImageCaptureBuilder
Represents a
ImageCaptureBuilder builder To create a new instance of this class, use ImageCaptureManager.createImageCaptureBuilder() Default values. |
interface |
PasteBuilder
Represents a
PasteBuilder
To create a new instance of this class, use ClipboardOperationsManager.createPasteBuilder() Created in NX7.5.0 |
Modifier and Type | Interface and Description |
---|---|
interface |
CurveAnalysisCombsBuilder
Deprecated.
Deprecated in NX8.5.0. Use
CurveCurvatureAnalysis .
|
interface |
CurveAnalysisInflectionsBuilder
Deprecated.
Deprecated in NX8.5.0. Use
CurveCurvatureAnalysisBuilder .
|
interface |
CurveAnalysisPeaksBuilder
Deprecated.
Deprecated in NX8.5.0. Use
CurveCurvatureAnalysis .
|
interface |
CurveContinuityBuilder
Represents a curve continuity builder
To create a new instance of this class, use AnalysisObjectCollection.createCurveContinuityBuilder(nxopen.DisplayableObject) Default values. |
interface |
CurveCurvatureAnalysisBuilder
Represents a
CurveCurvatureAnalysis builder To create a new instance of this class, use AnalysisObjectCollection.createCurveCurvatureAnalysisBuilder(nxopen.DisplayableObject) Default values. |
interface |
DeviationChecking
Represents a
DeviationChecking
To create a new instance of this class, use AnalysisManager.createDeviationCheckingObject() Created in NX6.0.0 |
interface |
DeviationGaugeBuilder
DeviationGaugeBuilder class
To create a new instance of this class, use AnalysisObjectCollection.createDeviationGaugeBuilder(nxopen.DisplayableObject) Default values. |
interface |
DistanceAnalysisBuilder
Represents a Distance Analysis builder.
|
interface |
DraftAnalysisBuilder
Represents a Draft Analysis builder
To create a new instance of this class, use AnalysisObjectCollection.createDraftAnalysisBuilder(nxopen.DisplayableObject) Default values. |
interface |
ExamineGeometry
Represents the Examine Geometry class
To create a new instance of this class, use AnalysisManager.createExamineGeometryObject() Created in NX5.0.0 |
interface |
FaceCurvatureAnalysisBuilder
Represents a
FaceCurvatureAnalysisBuilder builder. |
interface |
GapFlushnessBuilder
GapFlushnessBuilder class
To create a new instance of this class, use AnalysisObjectCollection.createGapFlushnessBuilder(nxopen.geometricanalysis.GapFlushness) Default values. |
interface |
GeometricProperties
Represents the Geometric Properties class.
|
interface |
HighlightLinesAnalysisBuilder
Represents a
HighlightLinesAnalysis
builder. |
interface |
LocalRadiusAnalysisBuilder
Represents a
LocalRadiusAnalysis builder To create a new instance of this class, use AnalysisObjectCollection.createLocalRadiusAnalysisBuilder(nxopen.geometricanalysis.LocalRadiusAnalysis) Default values. |
interface |
RadiusAnalysisBuilder
Represents a Radius Analysis builder.
|
interface |
ReflectionAnalysisBuilder
Represents a Reflection Analysis builder.
|
interface |
SimpleInterference
Represents the Simple Interference object.
|
interface |
SlopeAnalysisBuilder
Represents a Slope Analysis builder.
|
interface |
SolidDensity
Represents a
SolidDensity
To create a new instance of this class, use AnalysisManager.createSolidDensityObject() Created in NX5.0.0 |
interface |
SurfaceContinuityAnalysisBuilder
Represents a
SurfaceContinuityAnalysis builder To create a new instance of this class, use AnalysisObjectCollection.createSurfaceContinuityAnalysisBuilder(nxopen.DisplayableObject) Default values. |
interface |
SurfaceIntersectionBuilder
Represents a
SurfaceIntersection builder To create a new instance of this class, use AnalysisObjectCollection.createSurfaceIntersectionBuilder(nxopen.DisplayableObject) Default values. |
Modifier and Type | Interface and Description |
---|---|
interface |
SectionAnalysisBuilder
Represents a
SectionAnalysisObject builder. |
interface |
SectionAnalysisExBuilder
Represents a
SectionAnalysisExObject builder To create a new instance of this class, use AnalysisObjectCollection.createSectionAnalysisExBuilder(nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExObject) Default values. |
Modifier and Type | Interface and Description |
---|---|
interface |
ConvertFeatureGroupsToDesignGroupsBuilder
Represents a
ConvertFeatureGroupsToDesignGroupsBuilder builder To create a new instance of this class, use FeatureCollection.createConvertFeatureGroupsToDesignGroupsBuilder() Created in NX12.0.0 NX_REMOVE_FROM_JAVA_API |
interface |
ConvertFeatureGroupsToModulesBuilder
Represents a
ConvertFeatureGroupsToModulesBuilder builder To create a new instance of this class, use FeatureCollection.createConvertFeatureGroupsToModulesBuilder() Created in NX9.0.0 |
interface |
FtmFixedCurvesBuilder
Represents a
FtmFixedCurvesBuilder builder
To create a new instance of this class, use OmnicadManager.createFtmFixedCurvesBuilder() Default values. |
interface |
FtmTransformCurvesBuilder
Represents a
FtmTransformCurvesBuilder builder
To create a new instance of this class, use OmnicadManager.createFtmTransformCurvesBuilder() Default values. |
interface |
FtmTransformPointsBuilder
Represents a
FtmTransformPointsBuilder builder
To create a new instance of this class, use OmnicadManager.createFtmTransformPointsBuilder() Created in NX10.0.0 |
interface |
LocalUntrimBuilder
Represents a
LocalUntrimBuilder builder. |
interface |
MatchSurfaceBuilder
Represents a
MatchSurfaceBuilder builder.This builder's Commit can create a b-surface To create a new instance of this class, use CAMDataPrepManager.createMatchSurfaceBuilder() Default values. |
interface |
NestModuleBuilder
Deprecated.
Deprecated in NX10.0.0. Use
FeatureCollection instead.
|
interface |
PartModuleInputBuilder
Represents a
PartModuleInputBuilder To create a new instance of this class, use PartModule.createPartModuleInputBuilder() Default values. |
interface |
PartModuleOutputBuilder
Represents a
PartModuleOutputBuilder To create a new instance of this class, use PartModule.createPartModuleOutputBuilder() Created in NX8.0.0 |
interface |
PartModuleOutputBuilder1
Represents a
PartModuleOutputBuilder1 To create a new instance of this class, use PartModule.createPartModuleOutputBuilder1() Default values. |
interface |
PartModuleRelationshipBuilder
Represents a
PartModule builder To create a new instance of this class, use FeatureCollection.createPartModuleRelationshipBuilder(nxopen.features.PartModule) Created in NX8.0.0 |
interface |
PatternClockingBuilder
enables the ability to apply delta transforms on individual instances of a pattern within the pattern feature
To create a new instance of this class, use PatternDefinition.createClockingBuilder(int, int) Default values. |
interface |
PatternInstanceEditBuilder
pattern instance edit builder
To create a new instance of this class, use PatternDefinition.createPatternInstanceEditBuilder() Created in NX7.5.0 |
interface |
PointSetAlignmentBuilder
This class performs a point set to point set alignment
To create a new instance of this class, use Part.createPointSetAlignmentBuilder() Default values. |
interface |
PointsFromFileBuilder
Represents a
PointsFromFileBuilder builder
read points from a text file with format *.asc, *.txt, *.dat, *.pts
To create a new instance of this class, use Part.createPointsFromFileBuilder() Created in NX8.5.0 |
interface |
ReduceSurfaceRadiusBuilder
Reduce Surface Radius Builder of Geometric Utilities.
|
interface |
ReduceSurfaceRadiusFaceGroupBuilder
Reduce Surface Radius Face Group Builder of Geometric Utilities.
|
interface |
RenameLinkedPartModulePartBuilder
Represents a
PartModule builder To create a new instance of this class, use FeatureCollection.createRenameLinkedPartModulePartBuilder() Created in NX9.0.0 |
interface |
RenewFeatureBuilder
Represents a RenewFeatureBuilder object.
|
interface |
SnipIntoPatchesBuilder
Represents a
SnipIntoPatchesBuilder builder. |
interface |
UnnestModuleBuilder
Deprecated.
Deprecated in NX10.0.0. Use
FeatureCollection instead.
|
Modifier and Type | Method and Description |
---|---|
void |
WaveLinkRepository.setBuilder(Builder builder)
Set the builder of the active command.If the builder is feat builder,
then the feature from the builder will be queried and used as master feature.
|
Modifier and Type | Interface and Description |
---|---|
interface |
IssueBriefcaseSynchronizeBuilder
Represents a
IssueBriefcase synchronize builder To create a new instance of this class, use IssueBriefcase.createSynchronizeContentBuilder() Created in NX10.0.0 |
interface |
IssueContentBuilder
Represents a
IssueContent builder To create a new instance of this class, use IssueManager.createIssueContentBuilder(nxopen.issue.IssueContent) Default values. |
interface |
SnapshotSubsetBuilder
Used to create or edit issue snapshot subset.
|
interface |
SnapshotWorksetBuilder
Used to create or edit issue snapshot workset which is a container to hold all the corresponding
parts to represent an issue.
|
Modifier and Type | Interface and Description |
---|---|
interface |
AssemblyFromLayout2dBuilder
Represents a Builder for create assembly from Layout functionality which will create a
new assembly from the selected Layout
To create a new instance of this class, use ComponentCollection.createAssemblyFromLayout2dBuilder() Created in NX10.0.0 |
interface |
ConvertLayoutToSheetBuilder
Represents a Builder for converting Layout to drawing sheet
To create a new instance of this class, use LayoutDrawingSheetCollection.createConvertLayoutToSheetBuilder() Created in NX12.0.0 |
interface |
ConvertSheetToLayoutBuilder
Represents a Builder for converting a drawing sheet to Layout
To create a new instance of this class, use LayoutDrawingSheetCollection.createConvertSheetToLayoutBuilder() Created in NX12.0.0 |
interface |
CreateComponentFrom3DBuilder
Represents a Builder that creates
Component from Assembly To create a new instance of this class, use ComponentCollection.createComponentFrom3dBuilder(nxopen.View) Default values. |
interface |
DefineComponentAnchorPointBuilder
Represents a Builder for Define Component Anchor Point functionality which will define the anchor
point location of a 2D Component instance
To create a new instance of this class, use ComponentCollection.createDefineComponentAnchorPointBuilder() Created in NX10.0.0 |
interface |
DefineComponentBuilder
Represents a Builder for Define 2D component functionality which will define
a 2D Component and stores its definition in the Reuse Library
To create a new instance of this class, use ComponentCollection.createDefineComponentBuilder(nxopen.layout2d.Component) Default values. |
interface |
EditComponentSettingsBuilder
Represents a
EditComponentSettingsBuilder builder. |
interface |
ExportComponentHierarchyBuilder
Represents a Builder for export component 2D hierarchy
To create a new instance of this class, use ComponentCollection.createExportComponentHierarchyBuilder() Created in NX11.0.0 |
interface |
InsertComponentBuilder
Represents a Builder for Insert Component functionality which will insert a 2D
Component instance in the active sketch
To create a new instance of this class, use ComponentCollection.createInsertComponentBuilder() Created in NX10.0.0 |
interface |
LayoutDrawingSheetBuilder
Represents a Builder for creating
LayoutDrawingSheet s To create a new instance of this class, use LayoutDrawingSheetCollection.createLayoutDrawingSheetBuilder(nxopen.layout2d.LayoutDrawingSheet) Created in NX12.0.0 |
interface |
LocalDefinitionFolderBuilder
Represents a
LocalDefinitionFolderBuilder . |
interface |
MakeComponentUniqueBuilder
Represents a Builder for Make 2D Component unique functionality which will create a
new definition of the selected 2D Component instance
To create a new instance of this class, use ComponentCollection.createMakeComponentUniqueBuilder() Default values. |
interface |
NewComponentBuilder
Represents a Builder for New 2D Component functionality which will create an empty 2D Component
instance and stores its definition in the local 2D Component folder
To create a new instance of this class, use ComponentCollection.createNewComponentBuilder() Created in NX10.0.0 |
interface |
PublishComponentBuilder
Represents a Builder for Publish 2D Component functionality which will allow
local definitions to be exported into external storage locations
To create a new instance of this class, use ComponentCollection.createPublishComponentBuilder() Created in NX10.0.0 |
interface |
ReparentComponentBuilder
Represents a Builder for Reparent 2D Component functionality which will reparents
the selected 2D Component contents from another 2D Component definition.
|
interface |
SmashComponentBuilder
Represents a Builder for Smash 2D Component functionality which will break instances
of 2D Components into its constituent pieces, we can have multiple committed objects
To create a new instance of this class, use ComponentCollection.createSmashComponentBuilder() Created in NX10.0.0 |
Modifier and Type | Interface and Description |
---|---|
interface |
ColumnFeatureBuilder
Represents a
LineDesigner.ColumnFeature Features.FeatureBuilder
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createColumnFeatureBuilder Default values. |
interface |
ColumnGridEquipmentBuilder
Represents a LineDesigner.ColumnGridEquipment builder
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createColumnGridEquipmentBuilder Default values. |
interface |
ConnectionCreatorBuilder
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createConnectionCreatorBuilder Default values. |
interface |
ConveyorStationFeatureBuilder
Represents a
LineDesigner.ConveyorStationFeature builder
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createConveyorStationFeatureBuilder Default values. |
interface |
CoverFeatureBuilder
Represents a
LineDesigner.CoverFeature builder
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createCoverFeatureBuilder Default values. |
interface |
CreateFactoryElementBuilder
Represents a
LineDesigner.CreateFactoryElement builder
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createCreateFactoryElementBuilder Default values. |
interface |
CreateFenceBuilder
Represents a
LineDesigner.CreateFence builder
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createCreateFenceBuilder Created in NX9.0.0 |
interface |
CreateSystemBuilder
Represents a
LineDesigner.CreateSystem builder
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createCreateSystemBuilder Created in NX9.0.0 |
interface |
DisconnectConnectionBuilder
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createDisconnectConnectionBuilder Created in NX10.0.0 |
interface |
ExportPlantToDWGBuilder
Represents a
LineDesigner.ExportPlantToDWG builder
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createExportPlantToDwgBuilder Default values. |
interface |
ExportToDWGBuilder
Represents a
LineDesigner.ExportToDWG builder
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createExportToDwgBuilder Default values. |
interface |
FactoryCadGeoEquipmentAssemblyBuilder
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createFactorycadgeoequipmentassemblyBuilder Created in NX11.0.1 |
interface |
FactoryCadGeoEquipmentBuilder
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createFactorycadgeoequipmentBuilder Created in NX11.0.0 |
interface |
FloorEquipmentBuilder
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createFloorequipmentBuilder Default values. |
interface |
GateFeatureBuilder
Represents a
LineDesigner.GateFeature builder
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createGateFeatureBuilder Default values. |
interface |
HoleFeatureBuilder
Represents a
LineDesigner.HoleFeature builder
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createHoleFeatureBuilder Default values. |
interface |
ImportFactoryCadGeoBuilder
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createImportFactoryCadGeoBuilder Created in NX10.0.0 |
interface |
InsertSheetBuilder
Represents a
LineDesigner.InsertSheet builder
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createInsertSheetBuilder Default values. |
interface |
PlantProductionUnitCreatorBuilder
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#plantCreateProductionUnitCreatorBuilder Created in NX12.0.0 |
interface |
PlatformEquipmentBuilder
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createPlatformEquipmentBuilder Default values. |
interface |
ProductionUnitCreatorBuilder
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createProductionUnitCreatorBuilder Created in NX10.0.0 |
interface |
RailingFeatureBuilder
Represents a
LineDesigner.RailingFeature Features.FeatureBuilder
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createRailingFeatureBuilder Default values. |
interface |
RailOpeningFeatureBuilder
Represents a
LineDesigner.RailOpeningFeature builder
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createRailOpeningFeatureBuilder Default values. |
interface |
RenameDialogeBuilder
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createRenameDialogeBuilder Default values. |
interface |
RenameItemRevisionBuilder
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createRenameItemRevisionBuilder Created in NX10.0.3 |
interface |
ResizeConnectorBuilder
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createResizeConnectorBuilder Default values. |
interface |
SingleElementConveyorBuilder
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createSingleElementConveyorBuilder Created in NX9.0.0 |
interface |
StairwayEquipmentBuilder
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createStairwayEquipmentBuilder Default values. |
interface |
TypedConnectorFeatureBuilder
Represents a
LineDesigner.TypedConnectorFeature Features.FeatureBuilder
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createTypedConnectorFeatureBuilder Default values. |
Modifier and Type | Interface and Description |
---|---|
interface |
EditObjectDisplayBuilder
The
EditObjectDisplayBuilder is used to edit display settings of the markup objects. |
Modifier and Type | Interface and Description |
---|---|
interface |
AssignCornerBuilder
Builder class for Assign Corner which creates corner
To create a new instance of this class, use BuilderFactory.createAssignCornerBuilder(nxopen.Part, nxopen.assemblies.Component) Default values. |
interface |
ConnectBuilder
the Builder for Connect Path
To create a new instance of this class, use BuilderFactory.createConnectBuilder(nxopen.Part, nxopen.assemblies.Component[]) Created in NX11.0.0 |
interface |
CreatePathBuilder
Represents
CreatePathBuilder . |
interface |
DynamicCutElbowBehaviorBuilder
Represents
DynamicCutElbowBehaviorBuilder . |
interface |
EditPlacementBuilder
the Builder to Edit Placement
To create a new instance of this class, use BuilderFactory.createEditPlacementBuilder(nxopen.Part, nxopen.assemblies.Component) Created in NX12.0.0 |
interface |
EditPointBuilder
Represents
EditPointBuilder . |
interface |
InsulationBuilder
Represents
InsulationBuilder . |
interface |
ManageInlineBehaviorBuilder
Represents
ManageInlineBehaviorBuilder . |
interface |
MergeBuilder
the Builder to Merge Component
To create a new instance of this class, use BuilderFactory.createMergeBuilder(nxopen.Part, nxopen.assemblies.Component) Created in NX11.0.1 |
interface |
MovePathBuilder
Represents
MovePathBuilder . |
interface |
PartPlacementBuilder
Represents
PartPlacementBuilder . |
interface |
PathTransitionBuilder
Represents
PathTransitionBuilder . |
interface |
PathTransitionListManagerBuilder
Represents
PathTransitionListManagerBuilder . |
interface |
PipingComponentFileBuilder
the Builder for PipingComponentFile data
To create a new instance of this class, use BuilderFactory.createPipingComponentFileBuilder(nxopen.Part) Created in NX12.0.0 |
interface |
SplitBuilder
the Builder to Assign Discontinuity for the stocks
To create a new instance of this class, use BuilderFactory.createSplitBuilder(nxopen.Part, nxopen.routing.ControlPoint[]) Created in NX11.0.0 |
interface |
StockBuilder
Builder for creating/editing stocks.
|
interface |
TransformBlockBuilder
Represents
TransformBlockBuilder . |
Modifier and Type | Method and Description |
---|---|
void |
SCOUTExportBuilder.exportToScout(Builder camProfile)
Write elements to SCOUT 44.
|
Modifier and Type | Interface and Description |
---|---|
interface |
MeshProperties
Represents a mesh properties builder
To obtain an instance of this class use JAX_MFG_AM_ApplicationManager_GetMeshProperties Default values. |
interface |
Nester3D
Interface for AM Nesting Dialog Builder
To create a new instance of this class, use ApplicationManager.get3DNester() Default values. |
interface |
SupportBuilder
Represents a
Support builder To create a new instance of this class, use ApplicationManager.getSupportBuilder(nxopen.mfg.am.Support) Created in NX11.0.2 |
Modifier and Type | Interface and Description |
---|---|
interface |
AddSubmechanismBuilder
Represents a builder class that performs add submechanism in current context.
|
interface |
AdvancedSolutionBuilder
Represents a
AdvancedSolution builder To create a new instance of this class, use MotionSolutionCollection.createAdvancedSolutionBuilder(nxopen.motion.AdvancedSolution) Created in NX12.0.0 |
interface |
AnalyticalContactBuilder
Represents a
AnalyticalContact builder To create a new instance of this class, use AnalyticalContactCollection.createAnalyticalContactBuilder(nxopen.motion.AnalyticalContact) Default values. |
interface |
AnalyticalContactPropertyBuilder
Represents a
AnalyticalContactProperty builder To create a new instance of this class, use AnalyticalContactPropertyCollection.createAnalyticalContactPropertyBuilder(nxopen.motion.AnalyticalContactProperty) Default values. |
interface |
BaseSectionBuilder
Represents a
BaseSectionBuilder . |
interface |
BeamForceBuilder
Represents a
BeamForceBuilder builder To create a new instance of this class, use BeamForceCollection.createBeamForceBuilder(nxopen.motion.BeamForce) Default values. |
interface |
BodyContactBuilder
Represents a
BodyContactBuilder To create a new instance of this class, use BodyContactCollection.createBodyContactBuilder(nxopen.motion.BodyContact) Default values. |
interface |
BushingBuilder
Represents a Motion BushingBuilder
To create a new instance of this class, use BushingCollection.createBushingBuilder(nxopen.motion.Bushing) Default values. |
interface |
ConnectorBuilder
Represents ConnectorBuilder
This is an abstract class, and cannot be created. |
interface |
ControlInputBuilder
Represents a
ControlInput builder To create a new instance of this class, use ControlInputCollection.createControlInputBuilder(nxopen.motion.ControlInput) Created in NX11.0.0 |
interface |
ControlInputPortBuilder
Represents a
ControlPort builder specific to control input element. |
interface |
ControlOutputBuilder
Represents a
ControlOutput builder To create a new instance of this class, use ControlOutputCollection.createControlOutputBuilder(nxopen.motion.ControlOutput) Default values. |
interface |
CouplerBuilder
Represents a
CouplerBuilder This is an abstract class, and cannot be created. |
interface |
CouplerCableBuilder
Represents a
CouplerCableBuilder To create a new instance of this class, use CouplerCollection.createCouplerCableBuilder(nxopen.motion.CouplerCable) Created in NX6.0.0 |
interface |
CouplerGearBuilder
Represents a
CouplerGearBuilder To create a new instance of this class, use CouplerCollection.createCouplerGearBuilder(nxopen.motion.CouplerGear) Created in NX6.0.0 |
interface |
CouplerRckpnBuilder
Represents a
CouplerRckpnBuilder To create a new instance of this class, use CouplerCollection.createCouplerRckpnBuilder(nxopen.motion.CouplerRckpn) Created in NX6.0.0 |
interface |
CurveContactBuilder
Represents a
CurveContactBuilder To create a new instance of this class, use CurveContactCollection.createCurveContactBuilder(nxopen.motion.CurveContact) Default values. |
interface |
CurveOnCurveBuilder
Represents a
CurveOnCurveBuilder
To create a new instance of this class, use CurveOnCurveCollection.createCurveOnCurveBuilder(nxopen.motion.CurveOnCurve) Created in NX6.0.0 |
interface |
DamperBuilder
Represents a DamperBuilder
To create a new instance of this class, use DamperCollection.createDamperBuilder(nxopen.motion.Damper) Created in NX6.0.0 |
interface |
FlexBodyBuilder
Represents a
FlexBody builder To create a new instance of this class, use FlexBodyCollection.createFlexBodyBuilder(nxopen.motion.FlexBody) Default values. |
interface |
GeneralCouplerBuilder
Represents a
GeneralCouplerBuilder To create a new instance of this class, use GeneralCouplerCollection.createGeneralCouplerBuilder(nxopen.motion.GeneralCoupler) Default values. |
interface |
GraphBuilder
Deprecated.
Deprecated in NX11.0.0. Use
GraphObjectBuilder instead.
|
interface |
GraphObjectBuilder
Represents a
GraphObjectBuilder ,
only creation is supported
To create a new instance of this class, use GraphManager.createGraphObjectBuilder(nxopen.motion.Graph) Created in NX11.0.0 |
interface |
JointBuilder
This builder class is used to create or edit
Joint objects. |
interface |
JointDriverBuilder
Represents a
JointDriverBuilder
To create a new instance of this class, use JointDriverCollection.createJointDriverBuilder(nxopen.motion.JointDriver) Created in NX5.0.0 |
interface |
LinkBuilder
Represents a
LinkBuilder
To create a new instance of this class, use LinkCollection.createLinkBuilder(nxopen.motion.Link) Created in NX5.0.0 |
interface |
LinkCouplerBuilder
Represents a
LinkCouplerBuilder To create a new instance of this class, use LinkCouplerCollection.createLinkCouplerBuilder(nxopen.motion.LinkCoupler) Default values. |
interface |
LinkDriverBuilder
Represents a
LinkDriverBuilder
To create a new instance of this class, use LinkDriverCollection.createLinkDriverBuilder(nxopen.motion.LinkDriver) Created in NX11.0.0 |
interface |
LoadTransferBuilder
Represents a
LoadTransferBuilder To create a new instance of this class, use LoadTransferCollection.createLoadTransferBuilder(nxopen.motion.LoadTransfer) Default values. |
interface |
MarkerBuilder
Represents a builder of Marker
To create a new instance of this class, use MarkerCollection.createMarkerBuilder(nxopen.motion.Marker) Default values. |
interface |
MechatronicsBuilder
Represents a
Mechatronics builder To create a new instance of this class, use MechatronicsCollection.createMechatronicsBuilder(nxopen.motion.Mechatronics) Default values. |
interface |
MotionBuilder
This builder class is used to create or edit
MotionObject This is an abstract class, and cannot be created. |
interface |
MotionSensorBuilder
Represents a
MotionSensorBuilder
To create a new instance of this class, use MotionSensorCollection.createMotionSensorBuilder(nxopen.motion.MotionSensor) Default values. |
interface |
MotionSolutionBuilder
Represents a
MotionSolutionBuilder
To create a new instance of this class, use MotionSolutionCollection.createSolutionBuilder(nxopen.motion.MotionSolution) Created in NX5.0.0 |
interface |
MotorBuilder
This builder class is used to create or edit
Motor This is an abstract class, and cannot be created. |
interface |
PackagingBuilder
This class an abstract class and base class for
PackagingMeasureBuilder ,
PackagingTraceBuilder and PackagingInterferenceBuilder . |
interface |
PackagingInterferenceBuilder
This the builder class to create or edit an Interference object.
|
interface |
PackagingMeasureBuilder
This is the builder class to create or edit a Measure object.
|
interface |
PackagingTraceBuilder
This is the builder class to create or edit a Trace object.
|
interface |
PhysicsConversionBuilder
Represents a
PhysicsConversionBuilder builder To create a new instance of this class, use MotionSession.createPhysicsConversionBuilder(nxopen.NXObject) Created in NX8.0.0 |
interface |
PlantInputBuilder
Represents a
PlantInput builder To create a new instance of this class, use PlantInputCollection.createPlantInputBuilder(nxopen.motion.PlantInput) Created in NX6.0.0 |
interface |
PlantOutputBuilder
Represents a
PlantOutput builder To create a new instance of this class, use PlantOutputCollection.createPlantOutputBuilder(nxopen.motion.PlantOutput) Created in NX6.0.0 |
interface |
PMDCMotorBuilder
Represents a
PMDCMotorBuilder To create a new instance of this class, use PMDCMotorCollection.createPmdcMotorBuilder(nxopen.motion.PMDCMotor) Created in NX6.0.0 |
interface |
PointOnCurveBuilder
Represents a
PointOnCurveBuilder
To create a new instance of this class, use PointOnCurveCollection.createPointOnCurveBuilder(nxopen.motion.PointOnCurve) Default values. |
interface |
PointOnSurfaceBuilder
Represents a
PointOnSurfaceBuilder
To create a new instance of this class, use PointOnSurfaceCollection.createPointOnSurfaceBuilder(nxopen.motion.PointOnSurface) Created in NX6.0.0 |
interface |
ResultMeasureBuilder
Represents a
ResultMeasure builder To create a new instance of this class, use ResultMeasureCollection.createResultMeasureBuilder(nxopen.motion.ResultMeasure) Created in NX11.0.0 |
interface |
RoadBuilder
Represents a
RoadBuilder
To create a new instance of this class, use RoadCollection.createRoadBuilder(nxopen.motion.Road) Created in NX11.0.0 |
interface |
ScalarForceBuilder
Represents a
ScalarForceBuilder To create a new instance of this class, use ScalarForceCollection.createScalarForceBuilder(nxopen.motion.ScalarForce) Created in NX6.0.0 |
interface |
ScalarTorqueBuilder
Represents a
ScalarTorqueBuilder To create a new instance of this class, use ScalarTorqueCollection.createScalarTorqueBuilder(nxopen.motion.ScalarTorque) Created in NX6.0.0 |
interface |
SignalChartBuilder
Represents a
SignalChartBuilder To create a new instance of this class, use SignalChartCollection.createSignalChartBuilder(nxopen.motion.SignalChart) Created in NX6.0.0 |
interface |
SplineBeamBuilder
Represents a
SplineBeamBuilder builder To create a new instance of this class, use SplineBeamCollection.createSplineBeamBuilder(nxopen.motion.SplineBeam) Default values. |
interface |
SplineBeamPropertyBuilder
Represents a
SplineBeamPropertyBuilder builder To create a new instance of this class, use SplineBeamPropertyCollection.createSplineBeamPropertyBuilder(nxopen.motion.SplineBeamProperty) Default values. |
interface |
SpringBuilder
Represents a SpringBuilder
To create a new instance of this class, use SpringCollection.createSpringBuilder(nxopen.motion.Spring) Default values. |
interface |
StandardSectionBuilder
Represents a
StandardSectionBuilder . |
interface |
SubmechanismPositionerBuilder
Represents a
SubmechanismPositioner builder To create a new instance of this class, use SubmechanismPositionerCollection.createPositionerBuilder(nxopen.motion.SubmechanismPositioner) Created in NX12.0.0 |
interface |
TextBasedElementBuilder
Represents a
TextBasedElementBuilder builder To create a new instance of this class, use TextBasedElementCollection.createTextBasedElementBuilder(nxopen.motion.TextBasedElement) Created in NX12.0.0 |
interface |
TireBuilder
Represents a
Tire builder To create a new instance of this class, use TireCollection.createTireBuilder(nxopen.motion.Tire) Default values. |
interface |
TirePropertyBasicBuilder
Represents a builder for a
TirePropertyBasic To create a new instance of this class, use TirePropertyBasicCollection.createTirePropertyBasicBuilder(nxopen.motion.TirePropertyBasic) Default values. |
interface |
TirePropertyBuilder
Represents a Builder base class for Tire Properties
This is an abstract class, and cannot be created. |
interface |
TirePropertyCdBuilder
Represents a
TirePropertyCd builder To create a new instance of this class, use TirePropertyCdCollection.createTirePropertyCdBuilder(nxopen.motion.TirePropertyCd) Default values. |
interface |
TirePropertyFtBuilder
Represents a Builder for Motion Ftire Tire Property
To create a new instance of this class, use TirePropertyFtCollection.createTirePropertyFtBuilder(nxopen.motion.TirePropertyFt) Default values. |
interface |
TirePropertyMotorcycleBuilder
Represents a TirePropertyMotorcycleBuilder builder
To create a new instance of this class, use TirePropertyMotorcycleCollection.createTirePropertyMotorcycleBuilder(nxopen.motion.TirePropertyMotorcycle) Default values. |
interface |
TirePropertyNonInertialBuilder
Represents a builder for a Non-inertial Tire Property
To create a new instance of this class, use TirePropertyNonInertialCollection.createTirePropertyNonInertialBuilder(nxopen.motion.TirePropertyNonInertial) Default values. |
interface |
TirePropertyTnoBuilder
Represents a Builder for Motion TNO Tire Property.
|
interface |
UserDefinedSectionBuilder
Represents a
UserDefinedSectionBuilder . |
interface |
VectorForceBuilder
Represents a
VectorForceBuilder
To create a new instance of this class, use VectorForceCollection.createVectorForceBuilder(nxopen.motion.VectorForce) Created in NX5.0.0 |
interface |
VectorTorqueBuilder
Represents a
VectorTorqueBuilder
To create a new instance of this class, use VectorTorqueCollection.createVectorTorqueBuilder(nxopen.motion.VectorTorque) Created in NX5.0.0 |
Modifier and Type | Interface and Description |
---|---|
interface |
DesignStudyAttributeBuilder
Represents a
DesignStudyAttributeBuilder To create a new instance of this class, use DesignStudyCollection.createDesignStudyAttributeBuilder() Created in NX6.0.0 |
interface |
DesignStudyBuilder
Represents a
DesignStudyBuilder To create a new instance of this class, use DesignStudyCollection.createDesignStudyBuilder() Created in NX6.0.0 |
interface |
MapleExpBuilder
Deprecated.
Deprecated in NX12.0.0. Use
MathIntegrationExpBuilder instead.
|
interface |
MathIntegrationExpBuilder
Represents a
MathIntegrationExpBuilder To create a new instance of this class, use OptimizationCollection.createMathIntegrationExpBuilder() Created in NX12.0.0 |
interface |
OptimizationAttributeBuilder
Represents a
OptimizationAttributeBuilder To create a new instance of this class, use OptimizationCollection.createOptimizationAttributeBuilder() Created in NX6.0.0 |
interface |
OptimizationBuilder
Represents a
OptimizationBuilder To create a new instance of this class, use OptimizationCollection.createOptimizationBuilder() Created in NX6.0.0 |
Modifier and Type | Interface and Description |
---|---|
interface |
AttributeGroupReviseBuilder
Represents an attribute group revise builder.
|
interface |
ConfigurationContextBuilder
Represents a
ConfigurationContextBuilder builder To create a new instance of this class, use ConfigurationManager.createConfigurationContextBuilder() Created in NX9.0.0 |
interface |
EffectivityAttributePropertiesBuilder
Represents an
EffectivityAttributePropertiesBuilder to be used for creating effectivity attributes. |
interface |
ExportWorksetForReferenceBuilder
Represents a builder class that performs Create operations
To create a new instance of this class, use PdmSession.createExportWorksetForReferenceBuilder(nxopen.BasePart) Created in NX10.0.0 |
interface |
ObjectCreateBuilder
Represents a builder class that perofrms create operation
To create a new instance of this class, use PdmSession.createObjectCreateBuilder(java.lang.String[], java.lang.String[]) Created in NX10.0.0 |
interface |
PartCreationObjectAttributePropertiesBuilder
Deprecated.
Deprecated in NX8.5.0. Use
AttributePropertiesBuilder instead.
|
interface |
PartOperationAttributePropertiesBuilder
Represents an
PartOperationAttributePropertiesBuilder to be used for
creating attributes in part operation. |
interface |
PartOperationBuilder
Represents a builder class that performs various design element operations.
|
interface |
PartOperationCopyBuilder
Represents a builder class that performs various Save As operations.
|
interface |
PartOperationCreateBuilder
Represents a builder class that performs Create operations
To create a new instance of this class, use PdmSession.createCreateOperationBuilder(nxopen.pdm.PartOperationBuilder.OperationType) Created in NX10.0.0 |
interface |
PartOperationImportBuilder
Represents a builder class that performs Create operations
To create a new instance of this class, use PdmSession.createImportOperationBuilder() Default values. |
interface |
PartOperationMakeUniqueBuilder
Represents a
PartOperationMakeUniqueBuilder builder To create a new instance of this class, use PdmSession.createMakeUniqueOperationBuilder(nxopen.BasePart) Created in NX10.0.0 |
interface |
PartOperationValidationPropertiesBuilder
Represents an
PartOperationValidationPropertiesBuilder to be used
for overriding the default validation parameters for a part in import operation. |
interface |
SmartSaveBuilder
TODO: Add a documentation comment describing this class.
|
Modifier and Type | Interface and Description |
---|---|
interface |
PhysicalMaterialAssignBuilder
Represents a Physical Material Assign Builder
To create a new instance of this class, use PhysicalMaterialCollection.createMaterialAssignBuilder() Created in NX6.0.0 |
interface |
PhysicalMaterialLibMgrBuilder
Represents a
PhysicalMaterialLibMgrBuilder builder To create a new instance of this class, use PhysicalMaterialCollection.createMaterialLibmgrBuilder() Created in NX6.0.0 |
interface |
PhysicalMaterialListBuilder
This builder is used by the Materials list component that allows copying, editing, deleting. etc.
|
Modifier and Type | Interface and Description |
---|---|
interface |
DesignContextBuilder
Represents a builder class that performs PID Design Context operations.
|
interface |
EquipmentBuilder
Builder used to model a piece of Equipment.
|
interface |
FileNewApplicationBuilder
Represents a builder class that performs Generic File New operations.
|
interface |
FlowDirectionArrowBuilder
Represents FlowDirectionArrowBuilder
To create a new instance of this class, use PidManager.createFlowDirectionArrowBuilder(nxopen.Part, nxopen.pid.FlowDirectionArrow) Created in NX11.0.1 |
interface |
LibraryAuthoringBuilder
Represents a LibraryAuthoringBuilder.
|
interface |
OffSheetConnectorBuilder
Builder used to model a piece of Off Sheet Connector.
|
interface |
PipeBuilder
Represents a PipeBuilder.
|
interface |
PortEquipmentBuilder
Builder used to model a piece of PortEquipment.
|
interface |
SheetTemplateBuilder
Represents a
SheetTemplateBuilder builder, and the builder is used to model a sheet template. |
Modifier and Type | Interface and Description |
---|---|
interface |
PlacementEngineBuilder
Represents a builder class that will create and work with placement solutions.
|
Modifier and Type | Interface and Description |
---|---|
interface |
RunBuilder
Represents a RunBuilder.
|
Modifier and Type | Interface and Description |
---|---|
interface |
ComponentConstraintGroupBuilder
Represents a
ComponentConstraintGroupBuilder builder To create a new instance of this class, use ComponentAssembly.createConstraintGroupBuilder(nxopen.positioning.ComponentConstraintGroup, nxopen.assemblies.Component) Default values. |
Modifier and Type | Interface and Description |
---|---|
interface |
LoadDraftingStandardBuilder
Represents a
LoadDraftingStandardBuilder
To create a new instance of this class, use DraftingPreferenceManager.createLoadDraftingStandardBuilder() Created in NX5.0.0 |
interface |
ViewSection
Records / queries view section preferences.
|
Modifier and Type | Interface and Description |
---|---|
interface |
ConvertFromDieValidationBuilder
Use this builder to convert a simulation job done in Die Validation to Press Line Simulation.
|
interface |
CushionControlBuilder
Represents a
CushionControl builder To create a new instance of this class, use ApplicationManager.createCushionControlBuilder(nxopen.Part, nxopen.presslinesimulation.CushionControl) Default values. |
interface |
DrivenCamBuilder
Represents a PressLineSimulation.DrivenCam builder.
|
interface |
HydraulicLifterBuilder
Represents a
HydraulicLifterBuilder builder To create a new instance of this class, use ApplicationManager.createHydraulicLifterBuilder(nxopen.Part, nxopen.presslinesimulation.HydraulicLifter) Default values. |
interface |
HydraulicLifterListBuilder
Represents a
HydraulicLifterListBuilder builder To create a new instance of this class, use ApplicationManager.createHydraulicLifterListBuilder(nxopen.Part) Created in NX12.0.0 |
interface |
LinearCamBuilder
Represents a
LinearCamBuilder builder To create a new instance of this class, use ApplicationManager.createLinearCamBuilder(nxopen.Part, nxopen.presslinesimulation.LinearCam) Default values. |
interface |
LinearCamListBuilder
Represents a
LinearCamListBuilder builder To create a new instance of this class, use ApplicationManager.createLinearCamListBuilder(nxopen.Part) Created in NX12.0.0 |
interface |
MachineAdjustmentBuilder
Use this class to configure the machine adjustment axes of the press model.
|
interface |
MachineAdjustmentBuilderListBuilder
Use this class to obtain a list of
MachineAdjustmentBuilder objects. |
interface |
MotionCurvesBuilder
Represents a
MotionCurvesBuilder builder To create a new instance of this class, use ApplicationManager.createMotionCurvesBuilder(nxopen.Part) Created in NX12.0.0 |
interface |
MountPointBuilder
Use this class to mount tools, tooling and parts to interfaces.
|
interface |
MountPointBuilderListBuilder
Use this class to obtain a list of
MountPointBuilder objects. |
interface |
RotaryCamBuilder
Represents a
RotaryCamBuilder builder To create a new instance of this class, use ApplicationManager.createRotaryCamBuilder(nxopen.Part, nxopen.presslinesimulation.RotaryCam) Default values. |
interface |
RotaryCamListBuilder
Represents a
RotaryCamListBuilder builder To create a new instance of this class, use ApplicationManager.createRotaryCamListBuilder(nxopen.Part) Created in NX12.0.0 |
interface |
SetPressModelBuilder
A builder to setup the press model
To create a new instance of this class, use ApplicationManager.createSetPressModelBuilder() Created in NX12.0.0 |
interface |
UserMotionBuilder
Represents a
UserMotionBuilder builder To create a new instance of this class, use ApplicationManager.createUserMotionBuilder(nxopen.Part, nxopen.presslinesimulation.UserMotion) Default values. |
interface |
UserMotionListBuilder
Represents a
UserMotionListBuilder builder To create a new instance of this class, use ApplicationManager.createUserMotionListBuilder(nxopen.Part) Created in NX12.0.0 |
Modifier and Type | Interface and Description |
---|---|
interface |
CommandBuilder
Represents a
CommandBuilder . |
Modifier and Type | Interface and Description |
---|---|
interface |
AddFontBuilder
Builder for creating an add font user interface dialogue
To obtain an instance of this class use AddFontBuilder Created in NX8.5.0 |
interface |
AlignStockBuilder
Represents a
AlignStockBuilder
Builder for aligning non-circular stocks. |
interface |
AssignDiscontinuityBuilder
the Builder to Assign Discontinuity for the stocks
To create a new instance of this class, use RouteManager.createAssignDiscontinuityBuilder(nxopen.NXObject) Created in NX7.5.0 |
interface |
AssignPathBuilder
Assigns path to a broken routing run
To create a new instance of this class, use RouteManager.createAssignPathBuilder(nxopen.routing.Run) Created in NX8.5.0 |
interface |
AssignTangencyBuilder
Represents a
AssignTangencyBuilder object. |
interface |
AttributeMembersBuilder
Creates attibutemembers builder object to add to the search criteria list used by FindByAttributesBuilder
To create a new instance of this class, use FindByAttributesBuilder.attributeMembersBuilder() Created in NX8.5.0 |
interface |
BranchPathNumberingBuilder
Builder class for Branch Path Numbering.
|
interface |
BulkReplacementBuilder
Builder class for Bulk Replacement which manages replacement operations on Routing objects
Not support KF. |
interface |
ClockPartBuilder
Builder class for clock part object
To create a new instance of this class, use RouteManager.createClockPartBuilder(nxopen.NXObject) Default values. |
interface |
CompareRunsBuilder
Represents a
CompareRunsBuilder , used to compare runs in the work
part to the ones in another part, or to runs defined in xml files gathered in a folder
(native mode) or on an item revision (managed mode). |
interface |
ConnectedCurvesBuilder
Builder for creating automatically creating segments on end-to-end connected
curves.
|
interface |
ConnectPathBuilder
Represents a
ConnectPathBuilder . |
interface |
CopeCornerBuilder
Deprecated.
Deprecated in NX8.0.0. Use
AssignCornerBuilder instead.
|
interface |
CreateFabricationBuilder
Builder class to fabricate subassembly from standard parts, path segments, stock, and other routing objects within the current routing assembly
To create a new instance of this class, use RouteManager.createFabricationBuilder(nxopen.NXObject[]) Created in NX8.0.0 |
interface |
DefineRunBuilder
Builder Class for DefineRun Object
To create a new instance of this class, use RouteManager.createDefineRunBuilder(nxopen.routing.Run) Created in NX8.5.0 |
interface |
DeleteFontsBuilder
Represents a
DeleteFontsBuilder
To create a new instance of this class, use RouteManager.createDeleteFontsBuilder(nxopen.NXObject[]) Created in NX8.5.0 |
interface |
DeleteGapsBuilder
Represents a
DeleteGapsBuilder
To create a new instance of this class, use RouteManager.createDeleteGapsBuilder(nxopen.NXObject[]) Created in NX8.5.0 |
interface |
DeleteObjectsBuilder
Represents a
DeleteObjectsBuilder
To create a new instance of this class, use RouteManager.createDeleteObjectsBuilder(nxopen.NXObject[]) Created in NX6.0.0 |
interface |
DesignRuleViolationViewer
This class can be used to set the violation id, update text for overridding the violation and
update the user name used to override the violation.
|
interface |
DivisionsBuilder
Represents a
DivisionsBuilder
Builder for creating/editing splits at an end of a duct. |
interface |
DuctReinforcementBuilder
Builder for creating/editing duct reinforcements.
|
interface |
DuctSizeCalculatorBuilder
Builder to perform calculations of the duct which is to be used in the HVAC applications.
|
interface |
EditBendAngleBuilder
To create a new instance of this class, use RouteManager.createEditBendAngleBuilder(nxopen.NXObject) Created in NX7.5.0 |
interface |
EditCharacteristicsBuilder
|
interface |
EditLineSegmentBuilder
Builder for the "Edit Line Segment" operation.
|
interface |
EditPlacePartBuilder
To create a new instance of this class, use RouteManager.createEditPlacePartBuilder(nxopen.assemblies.Component) Created in NX10.0.0 |
interface |
ElbowSnapSettings
Helper object used the by
LinearPathBuilder builder. |
interface |
FillerStockBuilder
Creates Filler stock on selected Segments.
|
interface |
FindByAttributesBuilder
Find runs/objects with specified attribute name and attribute value criteria,
highlight the corresponding nodes in the run navigator and the graphics area
To create a new instance of this class, use RouteManager.createFindByAttributesBuilder() Created in NX8.5.0 |
interface |
FittingOverstockBuilder
Builder for creating or editing
FittingOverstock objects. |
interface |
GapDisplayBuilder
Builder for creating a gap arc object on a line segment.
|
interface |
HandrailBuilder
Represents a
HandrailBuilder
Creates a handrail from a selected point. |
interface |
InfoObjectsBuilder
Represents a
InfoObjectsBuilder
To create a new instance of this class, use RouteManager.createInfoObjectsBuilder(nxopen.NXObject[]) Created in NX6.0.0 |
interface |
InstanceNameLookupBuilder
Represents a
InstanceNameLookupBuilder . |
interface |
IntegrateRunsBuilder
Builder Class for Integrate Runs Object
To create a new instance of this class, use RouteManager.integrateRunsBuilder(nxopen.routing.Run, nxopen.routing.Run) Default values. |
interface |
LinearPathBuilder
Builder for creating routing linear paths.
|
interface |
LinearPathSettings
Helper object used the by
LinearPathBuilder builder. |
interface |
ManualRouteBuilder
To create a new instance of this class, use RouteManager.createManualRouteBuilder(nxopen.routing.electrical.ElectricalStockDevice.RouteLevel, nxopen.routing.electrical.ElectricalStockDevice) Created in NX7.5.0 |
interface |
MergeStocksBuilder
Represents a
MergeStocksBuilder
Builder for merging routing stocks ( including space reservation stocks ). |
interface |
ModelTerminalsBuilder
The Builder to Model/UnModel the Terminals
To create a new instance of this class, use RouteManager.modelTerminalsBuilder() Default values. |
interface |
OverstockBuilder
Builder for creating/editing overstocks.
|
interface |
OverstockFacesBuilder
Builder for qualifying faces for overstock application over fittings.
|
interface |
PathStockBuilder
Assigns stocks to segments based of users critiera and the current
default stock.
|
interface |
PlaceElbowsBuilder
Class PlaceElbowsBuilder
To create a new instance of this class, use RouteManager.createRoutingPlaceElbowsBuilder() Created in NX12.0.0 |
interface |
PlacementSolutionsBuilder
To create a new instance of this class, use RouteManager.createPlacementSolutionsBuilder() Created in NX7.5.0 |
interface |
PlacePartBuilder
To create a new instance of this class, use RouteManager.createPlacePartBuilderPTS(nxopen.TaggedObject, nxopen.TaggedObject, nxopen.Point3d, nxopen.TaggedObject) Created in NX7.5.0 |
interface |
PlatformCreatorBuilder
Builder for creating platform.
|
interface |
QuickPathBuilder
Builder for creating a path between user selected points.
|
interface |
RemoveDiscontinuityBuilder
Builder class for remove discontinuity object
To create a new instance of this class, use RouteManager.createRemoveDiscontinuityBuilder(nxopen.NXObject[]) Created in NX7.5.0 |
interface |
RouteSweptFoldBuilder
Represents a Rout Swept Fold Builder
To create a new instance of this class, use RouteManager.createRouteSweptFoldBuilder(nxopen.NXObject, nxopen.NXObject) Created in NX7.0.0 |
interface |
RouteSweptTwistBuilder
To create a new instance of this class, use RouteManager.createRouteSweptTwistBuilder(nxopen.NXObject) Created in NX6.0.0 |
interface |
RoutingMeasureDistanceBuilder
Represents a
RoutingMeasureDistanceBuilder Creator not available in KF because transient objects are not supported. |
interface |
RunItemsBuilder
The builder for creating the list item of RunItems
To create a new instance of this class, use DefineRunBuilder.createRunItemsBuilder() Created in NX8.5.0 |
interface |
SegmentPairBuilder
The builder for creating the list item of SegmentPairs
To create a new instance of this class, use AssignDiscontinuityBuilder.segmentPairBuilder() Created in NX7.5.0 |
interface |
SimplifyPathBuilder
Represents a
SimplifyPathBuilder for Simplify Path operation. |
interface |
SpaceReservationBuilder
Represents a
SpaceReservationBuilder
This builder takes one or more segments and creates space reservation stock on it. |
interface |
SplinePathBuilder
Represents a
SplinePathBuilder object. |
interface |
SplitDuctBuilder
Represents a
SplitDuctBuilder
Builder for creating/editing splits at an end of a duct. |
interface |
SplitRunBuilder
Builder Class for Split Run Object
To create a new instance of this class, use RouteManager.splitRunBuilder(nxopen.routing.Run) Default values. |
interface |
StockBrowserBuilder
Builder class for stock browser .
|
interface |
StockColorBuilder
Represents a
StockColorBuilder . |
interface |
StockDataRefreshBuilder
Represents a
StockDataRefreshBuilder
Builder for updating/reloading routing stock data definitions. |
interface |
StockOffsetPointBuilder
Applies Assemblies Constraints to a selected
Point or
ControlPoint to mimic the update/move behavior of
the input smart Point . |
interface |
StockPartConverterBuilder
Represents a
StockPartConverterBuilder
Builder for Part Conversion of the stocks. |
interface |
StockStyleBuilder
Builder class to assigns style to the selected stock .
|
interface |
StockTransitionBuilder
Builder for creating/editing stockTransition.
|
interface |
SubdivideSegmentBuilder
Represents a
SubdivideSegmentBuilder . |
interface |
TangencyGroupBuilder
Represents a
TangencyGroupBuilder
Assign tangency for segments connected with current editing spline. |
interface |
TerminalPortBuilder
Builder for creating the Terminal List Item for the ModelTerminals
To create a new instance of this class, use RouteManager.terminalPortBuilder() Created in NX7.5.0 |
interface |
TransformPathBuilder
Builder for the "Transform Path" operation.
|
interface |
UnifyPathBuilder
|
interface |
WatertightFittingsBuilder
Represents a
WatertightFittingsBuilder To create a new instance of this class, use RouteManager.createWatertightFittingsBuilder() Created in NX8.0.0 |
interface |
WindCatcherBuilder
Builder class for Wind Catcher feature.
|
Modifier and Type | Interface and Description |
---|---|
interface |
AssignProxyBuilder
Represents a
AssignProxyBuilder . |
interface |
CablewaysBuilder
Represents
CablewaysBuilder . |
interface |
CablewaysLayoutBuilder
Represents
CablewaysLayoutBuilder . |
interface |
PathArrangementBuilder
Builder class to manage Path Arrangements.
|
Modifier and Type | Interface and Description |
---|---|
interface |
ShapeSearchBuilder
This class provides the methods to execute shape search and get the searched results.
|
Modifier and Type | Interface and Description |
---|---|
interface |
ShipNavigatorNodeBuilder
Represents the ship navigator node builder to add or edit ship navigator node.
|
Modifier and Type | Interface and Description |
---|---|
interface |
ArchiveImportBuilder
Represents a ArchiveImportBuilder builder object.
|
interface |
ExportMachineKitBuilder
This class is used for the Export Machine Kit Dialog.
|
interface |
ImportMachineKitBuilder
This class is used for the Import Machine Kit Dialog.
|
interface |
IsvControlPanelBuilder
Represents a
IsvControlPanelBuilder
To create a new instance of this class, use KinematicConfigurator.createIsvControlPanelBuilder(nxopen.sim.IsvControlPanelBuilder.VisualizationType, nxopen.cam.CAMObject[]) Created in NX8.0.0 |
interface |
KinematicAxisBuilder
Represents the SimKimAxisBuilder class object
Use the KinematicConfigurator class to create a KinematicAxisBuilder object. |
interface |
KinematicChain
This class is used for add kinematic chain to the list.
|
interface |
KinematicChainConfiguration
This class is used for define kinematic chains.
|
interface |
KinematicChannelConfigurationBuilder
This class is used for channel configuration.
|
interface |
KinematicComponentBuilder
Represents the KinematicComponentBuilder class object
To create a new instance of this class, use KinematicComponentCollection.createHeadBaseComponentBuilder(nxopen.sim.KinematicComponent) Created in NX7.5.0 |
interface |
KinematicImportMcfBuilder
Represents a builder for an import axis and channel data from mcf
Use the Part class to create a KinematicImportMcfBuilder object. |
interface |
KinematicJunctionBuilder
Represents the SimKimJunctionBuilder class object
Use the KinematicConfigurator class to create a KinematicJunctionBuilder object. |
interface |
KinematicSinumerikCaBuilder
This class is used for edit sinumerik collision avoidance properties.
|
interface |
LoadSnapshotBuilder
Represents a
LoadSnapshotBuilder
To create a new instance of this class, use KinematicConfigurator.createSimulationLoadsnapshotBuilder() Created in NX12.0.0 |
interface |
MachineKitBuilder
This class is used for the Machine Kit Create Dialog.
|
interface |
MachineLibraryBuilder
This class is used for the Machine Library Dialog.
|
interface |
MachineToolConfiguration
Represents a Machine Tool Configuration object.
|
interface |
NcProgramManagerBuilder
Represents a NcProgramManagerBuilder builder object.
|
interface |
SaveSnapshotBuilder
Represents a
SaveSnapshotBuilder
To create a new instance of this class, use KinematicConfigurator.createSimulationSavesnapshotBuilder() Created in NX12.0.0 |
interface |
SimDebugBuilder
Represents a
SimDebugBuilder
To create a new instance of this class, use KinematicConfigurator.createSimDebugBuilder() Created in NX8.0.0 |
interface |
SinumerikCaExportBuilder
This class is used for export a spf file.
|
interface |
SinumerikCaFacetBuilder
This class is used for set the facet tolerance.
|
interface |
SinumerikCaPlaceholderBuilder
This class is used for select or unselect component of the placeholder tools.
|
interface |
SinumerikCaSimplifyBodiesBuilder
This class is used for replace geometry.
|
Modifier and Type | Interface and Description |
---|---|
interface |
CreationPostBuilder
This class is used to create a new postprocessor.
|
interface |
PostConfiguratorBuilder
This class is used to create a post configurator builder.
|
Modifier and Type | Interface and Description |
---|---|
interface |
AssignWeldsBuilder
AssignWeldsBuilder
To create a new instance of this class, use nxopen.ToolDesigner.ToolDesignerManager#createAssignWeldsBuilder Created in NX11.0.0 |
interface |
AssociateDatumsUnitDesignsBuilder
AssociateDatumsUnitDesignsBuilder
To create a new instance of this class, use nxopen.ToolDesigner.ToolDesignerManager#createAssociateDatumsUnitDesignsBuilder Default values. |
interface |
CloneUnitDesignBuilder
A class that used for clone unit design
To create a new instance of this class, use nxopen.tooldesigner.ToolDesignerManager#createCloneUnitDesignBuilder Created in NX12.0.0 |
interface |
MultiSectionBuilder
A class that used for creating multi section
To create a new instance of this class, use nxopen.ToolDesigner.ToolDesignerManager#createMultiSectionBuilder Default values. |
interface |
ReusePieChartBuilder
ReusePieChartBuilder
To create a new instance of this class, use nxopen.ToolDesigner.ToolDesignerManager#createReusePieChartBuilder Created in NX10.0.0 |
interface |
SearchDatumsBuilder
SearchDatumsBuilder
To create a new instance of this class, use nxopen.ToolDesigner.ToolDesignerManager#createSearchDatumsBuilder Created in NX10.0.0 |
interface |
SearchDesignesBuilder
SearchDesignesBuilder
To create a new instance of this class, use nxopen.ToolDesigner.ToolDesignerManager#createSearchDesignesBuilder Created in NX10.0.0 |
interface |
SelectableTableEditorTesterBuilder
A class that used for align the model to the product
To create a new instance of this class, use nxopen.ToolDesigner.ToolDesignerManager#createSelectableTableEditorTesterBuilder Created in NX11.0.1 |
interface |
SelectDatumsBuilder
SelectDatumsBuilder
To create a new instance of this class, use nxopen.ToolDesigner.ToolDesignerManager#createSelectDatumsBuilder Default values. |
interface |
SelectFixtureRootBuilder
A class that used for align the model to the product
To create a new instance of this class, use nxopen.ToolDesigner.ToolDesignerManager#createSelectFixtureRootBuilder Created in NX10.0.0 |
interface |
SelectFixtureUnitsBuilder
SelectFixtureUnitsBuilder
To create a new instance of this class, use nxopen.ToolDesigner.ToolDesignerManager#createSelectFixtureUnitsBuilder Default values. |
interface |
SelectGunTipsBuilder
A class that used for align the model to the product
To create a new instance of this class, use nxopen.ToolDesigner.ToolDesignerManager#createSelectGunTipsBuilder Created in NX11.0.0 |
interface |
SelectWeldsBuilder
SelectWeldsBuilder
To create a new instance of this class, use nxopen.ToolDesigner.ToolDesignerManager#createSelectWeldsBuilder Default values. |
interface |
SetGunApproachBuilder
SetGunApproachBuilder
To create a new instance of this class, use nxopen.ToolDesigner.ToolDesignerManager#createSetGunApproachBuilder Default values. |
interface |
VolumeFilterBuilder
VolumeFilterBuilder
To create a new instance of this class, use nxopen.ToolDesigner.ToolDesignerManager#createVolumeFilterBuilder Created in NX10.0.0 |
Modifier and Type | Interface and Description |
---|---|
interface |
AddReusableFeatureBuilder
Represents a
AddReusableFeatureBuilder To create a new instance of this class, use AddReusableFeatureCollection.createBuilder(nxopen.tooling.AddReusableFeatureCollection.InputData) Default values. |
interface |
AddReusablePart
Represents a
AddReusablePart
To create a new instance of this class, use AddReusablePartCollection.createBuilder() Default values. |
interface |
AssemblyDrawingBuilder
Represents a
AssemblyDrawingBuilder which is
used to create or edit the Assembly Drawing. |
interface |
AssignPatchBuilder
Represents a builder to be used to add sheet bodies as patch surfaces or delete patch surfaces.
|
interface |
AutoDimensionBuilder
Represents a
AutoDimensionBuilder which is
used to create or edit the Auto Dimension. |
interface |
BackingPadBuilder
Represents a
BackingPadBuilder which is used to create or delete the Backing Pad. |
interface |
BendInsertDesignBuilder
Represents a
BendInsertDesignBuilder
Bend Insert Design is to create inset puch or die for bend . |
interface |
BendOperationBuilder
Represents a
BendOperationBuilder builder. |
interface |
BlankGeneratorBuilder
Represents a
BlankGeneratorBuilder
This class is for Blank Generator Design UI
To create a new instance of this class, use BlankGeneratorCollection.createBlankGeneratorBuilder() Created in NX7.5.0 |
interface |
BlankLayoutBuilder
Progressive Die Wizard blank layout builder
To create a new instance of this class, use BlankLayoutCollection.createBlankLayoutBuilder() Default values. |
interface |
BlankNestingBuilder
Blank Nesting Builder of PDW, EDW and Die Engineering.
|
interface |
BlendCurve3DBuilder
Represents a
BlendCurve3DBuilder builder which implements
blend curves in one side where the corner radius is too small. |
interface |
BomBuilder
Represents a Tooling::BomBuilder builder
To create a new instance of this class, use BomCollection.createBomBuilder() Default values. |
interface |
BomListBuilder
Represents a
BomListBuilder builder. |
interface |
BurringInsertBuilder
Progressive Die Wizard builder to design burring punch and die insert
To create a new instance of this class, use BurringInsertCollection.createBurringInsertBuilder() Default values. |
interface |
CalculateAreaBuilder
The CalculateArea builder
To create a new instance of this class, use CalculateAreaCollection.createBuilder() Default values. |
interface |
ChangeoverManagementBuilder
Represents a
ChangeoverManagementBuilder to support changeover workflow management. |
interface |
ChannelAdjustBuilder
The builder class for Channel Adjust which assists you
to adjust the postion and the length of the channel.
|
interface |
ChannelFittingBuilder
The builder class for Channel Fitting which assists you
to add cooling fitting.
|
interface |
ClearanceManagementBuilder
Progressive Die Wizard builder to management clearances.
|
interface |
ColorExpressionsBuilder
Represents a
ColorExpressionsBuilder builder. |
interface |
CompDrawingBuilder
Represents a
CompDrawingBuilder which is
used to create or edit the Component Drawing. |
interface |
ConceptPositionBuilder
concept position builder for standard part design
To create a new instance of this class, use ConceptPositionCollection.createConceptPositionBuilder() Created in NX6.0.0 |
interface |
ConcurrentDesignManagementBuilder
Represents a
ConcurrentDesignManagementBuilder to support concurrent design workflow management. |
interface |
CoolingConnectBuilder
The builder class for Cooling connection which assists you
to create channel and connect it to other channels.
|
interface |
CoolingDefineChannelBuilder
The builder class for Cooling Define Channel which assists you
to create channels directly.
|
interface |
CoolingExtendBuilder
The builder class for Channel Extend which assists you
to extend the channel.
|
interface |
CoolingPatternBuilder
The builder class for Cooling pattern which assists you
to create channels with selected curves.
|
interface |
CopySolidBuilder
Represents a
CopySolidBuilder builder. |
interface |
CornerDesignBuilder
Represents a
CornerDesignBuilder ,
Corner Design is to provide tools to make corner. |
interface |
CreateBoxBuilder
Represents a box creation operation
To create a new instance of this class, use CreateBoxCollection.createBoxBuilder(nxopen.NXObject) Default values. |
interface |
DefineCamBuilder
Represents a
DefineCamBuilder to create different types of cam objects, which
are used for kinematic motion To create a new instance of this class, use ProgressiveDieManager.createDefineCamBuilder() Default values. |
interface |
DefineLifterBuilder
Represents a
DefineLifterBuilder to create different types of lifter objects, which
are used for kinematic motion. |
interface |
DesignTrimToolBuilder
Represents a builder to be used to create Mold Wizard design trim tool.
|
interface |
DieBaseBuilder
Represents Progressive Die Wizard and Engineering Die Wizard builder to manage die base.
|
interface |
DieCavityAndSlugHoleBuilder
Represents die cavity and slug hole builder.
|
interface |
DieDesDrawDieBuilder
Represents the Die Design draw die management builder, which is to create a draw die by selected
sheet body, curve and base plane.
|
interface |
DieDesDrawPunchBuilder
Die Design draw punch management builder, create a draw die punch by selected sheet body, curve
and base plane.
|
interface |
DieDesignLowerBinderBuilder
Represents a Lower Binder builder
To create a new instance of this class, use AutoDieCollection.createDieDesignLowerBinderBuilder(nxopen.features.Feature) Created in NX9.0.0 |
interface |
DieDesignSettingBuilder
Represents a
DieDesignSettingBuilder
This class is for Die Design Setting UI
To create a new instance of this class, use DieDesignSettingCollection.createDieDesignSettingBuilder() Default values. |
interface |
DieDesignTrimPostBuilder
Represents a Trim Post builder
To create a new instance of this class, use AutoDieCollection.createDieDesignTrimPostBuilder(nxopen.features.Feature) Created in NX9.0.0 |
interface |
DieDesPierceInsertBuilder
Represents Die Design Pierce Insert builder.
|
interface |
DieEngDefineProductOrientationBuilder
Die Engineer define product orientation builder.
|
interface |
DieEngDieTipBuilder
Die Engineer die tip management builder.
|
interface |
DieEngFormTaskBuilder
Represents a Form Task builder
To create a new instance of this class, use AutoDieCollection.createDieEngFormTaskBuilder(nxopen.features.Feature) Default values. |
interface |
DieEngLineupBuilder
Die Engineer lineup management builder.
|
interface |
DieEngProcessUpdateManagerBuilder
Die Engineer process update manager management builder.
|
interface |
DieEngStampingCarryoverBuilder
Represents a Stamping Carryover builder
To create a new instance of this class, use AutoDieCollection.createDieEngStampingCarryoverBuilder(nxopen.features.BodyFeature) Created in NX10.0.0 |
interface |
DieEngStampingOutputBuilder
Represents a Stamping Output builder
To create a new instance of this class, use AutoDieCollection.createDieEngStampingOutputBuilder(nxopen.features.BodyFeature) Default values. |
interface |
DieEngTrimAngleCheckBuilder
Represents a Trim Angle Check builder
To create a new instance of this class, use AutoDieCollection.createDieEngTrimAngleCheckBuilder(nxopen.geometricanalysis.AnalysisObject) Default values. |
interface |
DieEngTrimTaskBuilder
Die Engineer trim task management builder, create a trim task by selected die tip, trim bounds,
start plane and end plane.
|
interface |
DieInsertBuilder
Represents die insert builder.
|
interface |
DirectUnbendBuilder
The builder contains all inputs for direct unbend.
|
interface |
DirectUnfoldBuilder
The builder contains all inputs for direct unfolding.
|
interface |
DrawingSheetNameBuilder
Represents a
DrawingSheetNameBuilder To create a new instance of this class, use ToolingDrawingCollection.createDrawingSheetNameBuilder() Created in NX8.5.0 |
interface |
EdgePatchBuilder
Represents a builder to be used to create edge patch surfaces.
|
interface |
EjectorPostProcessingBuilder
Represents a builder to be used to create Mold Wizard ejector post processing.
|
interface |
EjectorTableBuilder
Represens a ejector table builder.
|
interface |
ElectrodeBlankBuilder
Design electrode blank builder to create an electrode blank for the selected body.
|
interface |
ElectrodeCheckingBuilder
Electrode Checking builder to check the touch status of all electrode.
|
interface |
ElectrodeComponentBuilder
Electrode component builder to install holder and pallet.
|
interface |
ElectrodeCopyBuilder
The ElectrodeCopy builder
To create a new instance of this class, use ElectrodeCopyCollection.createElectrodeCopyBuilder() Default values. |
interface |
ElectrodeDeleteBuilder
Electrode delete component builder to remove blank, pallet and holder from assembly.
|
interface |
ElectrodeDesign
Represents an Electrode Design.
|
interface |
ElectrodeInitializationBuilder
Electrode initialize project builder to creates an electrode design assembly.
|
interface |
EnlargeSurfaceBuilder
Mold Wizard enlarge surface management builder, trims a enlarged surface to a boundary of edges,
curves, datum planes or faces.
|
interface |
EWDraftingBuilder
Represents the drafting builder which is used to create electrode drafting.
|
interface |
EWMultiPositionBuilder
Represents the multiple position builder which is used to get transformed electrode heads together.
|
interface |
FaceAttributeBuilder
Represents a builder to be used to create face attribute.
|
interface |
FaceColorManagementBuilder
Tooling builder to assign and edit color of objects
To create a new instance of this class, use FaceColorManagementCollection.createFaceColorManagementBuilder() Default values. |
interface |
FaceSplitBuilder
Represents a face split operation
To create a new instance of this class, use FaceSplitCollection.createFaceSplitBuilder() Default values. |
interface |
FamilyMoldBuilder
Creates a Mold Wizard Family Mold builder
To create a new instance of this class, use FamilyMoldCollection.createFamilyMoldBuilder() Created in NX6.0.0 |
interface |
FastenerAssemConfigBuilder
Represents a Fastener Assem Config Collection.
|
interface |
FastenerAssy
Represents a
FastenerAssy
To create a new instance of this class, use FastenerAssyCollection.createBuilder() Default values. |
interface |
FastenerAssyCustomizationBuilder
Fastener assembly customization builder.
|
interface |
FastenerRemoveNodeBuilder
Fastener remove node builder.
|
interface |
FeatureReferenceSetBuilder
Represents a
FeatureReferenceSetBuilder builder. |
interface |
FlowAnalysisBuilder
Represents the builder which is used to create flow analysis.
|
interface |
FlowDisplayBuilder
Represents the builder which is used to create flow analysis.
|
interface |
ForceCalculationBuilder
Represents a
ForceCalculationBuilder
Force Calculation Design is to calculate force of process
To create a new instance of this class, use ForceCalculationCollection.createForceCalculationBuilder() Default values. |
interface |
FormingInsertBuilder
Progressive Die Wizard builder to design forming punch and die insert
To create a new instance of this class, use FormingInsertCollection.createFormingInsertBuilder() Default values. |
interface |
GeneralInsertBuilder
General Insert Design Builder of PDW and EDW.
|
interface |
GuidedExtensionBuilder
Builder for creating Guided Extension surface in NX
To create a new instance of this class, use GuidedExtensionManager.createBuilder() Default values. |
interface |
HemFixerBuilder
Hem Fixer Builder of PDW and EDW.
|
interface |
HoleDatumSymbolBuilder
Creates hole datum symbol builder for progressive die.
|
interface |
HoleManufacturingNoteBuilder
Tooling builder for HoleManufacturingNote
To create a new instance of this class, use HoleManufacturingNoteCollection.createHoleManufacturingNoteBuilder() Default values. |
interface |
HoleReportBuilder
Represents a
HoleReportBuilder
This class is for Hole Report Design UI
To create a new instance of this class, use HoleReportCollection.createHoleReportBuilder() Default values. |
interface |
InitProjBuilder
Represents a
InitProjBuilder
To create a new instance of this class, use InitProjCollection.createInitProjBuilder() Default values. |
interface |
InitProjectBuilder
Mold Wizard initialize project builder
To create a new instance of this class, use InitProjectCollection.createBuilder() Default values. |
interface |
InsertAuxiliaryBuilder
PDW insert auxiliary builder to design various auxiliaries of insert group
To create a new instance of this class, use InsertAuxiliaryCollection.createInsertAuxiliaryBuilder() Default values. |
interface |
InsertEditToolsBuilder
Represents a
InsertEditToolsBuilder which is
used to copy or delete the insert edit. |
interface |
IntermediateStageBuilder
Represents a
IntermediateStageBuilder builder. |
interface |
LayoutBuilder
Represents a Tooling::LayoutBuilder builder
To create a new instance of this class, use MWLayoutCollection.createLayoutBuilder() Default values. |
interface |
LayoutManagementBuilder
Layout Management Builder of Engineering Die Wizard
To create a new instance of this class, use LayoutManagementCollection.createLayoutManagementBuilder() Default values. |
interface |
LayoutRepositionBuilder
Represents a Tooling::LayoutRepositionBuilder builder
To create a new instance of this class, use MWLayoutCollection.createLayoutRepositionBuilder() Default values. |
interface |
LsdynaFormAnalysisResultDisplayBuilder
Represents a Ly-Dyna Formability Analysis - Result Display builder
To create a new instance of this class, use AutoDieCollection.createLsdynaFormAnalysisResultDisplayBuilder() Default values. |
interface |
LsdynaGeometryPreparationBuilder
Stamping Die LS-Dyna integration draw geometry preprare builder.
|
interface |
LsdynaKfileGeneratorBuilder
Represents LS-Dyna K file builder - K file generator builder
To create a new instance of this class, use AutoDieCollection.createLsdynaKfileGeneratorBuilder() Default values. |
interface |
ManufacturingGeometryBuilder
Represents a builder to be used to create manufacturing geometry.
|
interface |
MoldCsysBuilder
Mold Wizard MoldCsys project builder
To create a new instance of this class, use MoldCsysCollection.createMoldCsysBuilder() Default values. |
interface |
MoldDesign
Represents an Mold Design.
|
interface |
MoldFeatureRecognitionBuilder
Represents a
MoldFeatureRecognitionBuilder builder To create a new instance of this class, use MoldwizardManager.createMoldFeatureRecognitionBuilder() Default values. |
interface |
MoldFillingBuilder
Builder used to add a gate/runner standard part from fill library, it returns null.
|
interface |
MoldInsertBuilder
Mold Wizard mold insert management builder
To create a new instance of this class, use MoldInsertCollection.createMoldInsertBuilder() Default values. |
interface |
MoldProcessBuilder
Represents a Tooling::MoldProcessBuilder builder
To create a new instance of this class, use MoldProcessCollection.createMoldProcessBuilder() Default values. |
interface |
MotionSimulationBuilder
Represents a
MotionSimulationBuilder to support dynamic interference check. |
interface |
MWCopySheetsBuilder
Builder for copying sheets in the Mold Wizard application
To create a new instance of this class, use MWCopySheetsCollection.createBuilder() Default values. |
interface |
MWDefineRegionsBuilder
The MWDefineRegions builder
To create a new instance of this class, use MWDefineRegionsCollection.createBuilder() Default values. |
interface |
MWDefineSheetsBuilder
Builder for defining sheets in Mold Wizard
To create a new instance of this class, use MWDefineSheetsCollection.createBuilder() Default values. |
interface |
MWDesignGuideLinesBuilder
The builder for designing guide lines in Mold Wizard.
|
interface |
MWDesignPartingSurfaceBuilder
The builder for designing parting surface in Mold Wizard.
|
interface |
MWMoldedPartValidationBuilder
Represents a builder to be used to perform Molded Part Validation analysis.
|
interface |
MWPartingManagerBuilder
Builder for the Parting Manager in the Mold Wizard application
To create a new instance of this class, use MWPartingManagerCollection.createBuilder() Created in NX7.5.0 |
interface |
MWSearchRegionBuilder
The Search Region builder is for defining a region by searching the region faces given a set of seed faces and boundary edges.
|
interface |
MWTraversePartingLinesBuilder
Builder for creating parting lines by traversing in the Mold Wizard application
To create a new instance of this class, use MWTraversePartingLinesCollection.createBuilder() Created in NX7.5.0 |
interface |
ObjectAttributeManagementBuilder
Tooling builder to assign and edit attributes of objects
To create a new instance of this class, use ObjectAttributeManagementCollection.createObjectAttributeManagementBuilder() Default values. |
interface |
OffsetCurve3DBuilder
Deprecated.
Deprecated in NX10.0.0. Please use
Offset3DCurveBuilder instead
|
interface |
PiercingInsertBuilder
Represents piercing insert builder.
|
interface |
PiercingInsertMiniToolsBuilder
Represents piercing insert mini tools builder.
|
interface |
PocketBuilder
Mold Wizard pocket management builder
To create a new instance of this class, use PocketCollection.createPocketBuilder() Default values. |
interface |
PrebendBuilder
Represents a
PrebendBuilder builder to divide bend faces. |
interface |
ProfileSplitBuilder
The ProfileSplit builder
To create a new instance of this class, use ProfileSplitCollection.createProfileSplitBuilder() Created in NX6.0.0 |
interface |
PunchInsertBuilder
Represents punch insert builder.
|
interface |
QuickDatumCsysBuilder
Represents a
QuickDatumCsysBuilder builder. |
interface |
QuickQuotationBuilder
Progressive Die Wizard builder to create quick quotation.
|
interface |
ReferenceBlendBuilder
The ReferenceBlend builder
To create a new instance of this class, use ReferenceBlendCollection.createReferenceBlendBuilder() Created in NX7.0.0 |
interface |
ReliefDesignBuilder
Represents a
ReliefDesignBuilder
Relief Design is to cut relief pocket for forming region . |
interface |
RemoveHolesBuilder
Remove Hole is used to patch holes for a solid body.
|
interface |
RenameAndExportComponentBuilder
Creates rename and export component builder for progressive die.
|
interface |
ReplaceSolidBuilder
Represents a replace solid operation.
|
interface |
ReusableObjectPasteBuilder
Represents a
ReusableObjectPasteBuilder Use the ReusableObjectManager class to create a ReusableObjectPasteBuilder. |
interface |
ReusablePocketBuilder
Reusable pocket builder.
|
interface |
ReusePositioningObjectBuilder
Represents a
ReusePositioningObjectBuilder Use the ReusableObjectManager class to create a ReusePositioningObjectBuilder. |
interface |
RunnerBuilder
Mold Wizard runner management builder, select curves as runner guide, choose section type and edit
section parameters, optional choose boolean type to create runner channel.
|
interface |
RunSimulationBuilder
Represents a
RunSimulationBuilder to animate the model,
analyze the collision and reference. null is returned To create a new instance of this class, use ProgressiveDieManager.createRunSimulationBuilder() Default values. |
interface |
ScrapDesignBuilder
Represents a scrap design builder
To create a new instance of this class, use ScrapDesignCollection.createScrapDesignBuilder() Default values. |
interface |
SectionLineCreationBuilder
Represents a
SectionLineCreationBuilder which is
used to create or edit the section line creation. |
interface |
SheetMetalFeatureRecognitionBuilder
Represents a
SheetMetalFeatureRecognitionBuilder builder To create a new instance of this class, use MoldwizardManager.createSheetMetalFeatureRecognitionBuilder() Created in NX11.0.1 |
interface |
ShimBuilder
Shim Builder of PDW and EDW.
|
interface |
ShimInnerProfileSetBuilder
This is a seed block of set list.
|
interface |
SIZERExportBuilder
Exports input parameters for motor selection to SIZER drive design to
support the sizing, configuration, and selection of drive components.
|
interface |
SIZERImportBuilder
Imports results for motor selection from SIZER drive design based on
the sizing, configuration, and selection of drive components.
|
interface |
SlugRetentionBuilder
Represents a
SlugRetentionBuilder which is used to create the Slug Retention. |
interface |
SmartScrewUpdateBuilder
Smart Screw Update of MW, PDW and EDW.
|
interface |
SolidPatchBuilder
Represents a builder to be used to create a solid patch.
|
interface |
SpecialFormingBuilder
Creates special forming insert builder for progressive die.
|
interface |
SpecialPiercingInsertBuilder
Creates special piercing insert for progressive die.No entity is returned.
|
interface |
SpecifyBaffleBuilder
Represents a builder to be used to create specify baffle.
|
interface |
SpecifyCircuitBuilder
Represents a builder to be used to create specify circuit.
|
interface |
SpindleSliderBuilder
Represents a
SpindleSliderBuilder to create a spindle slider To create a new instance of this class, use AutoDieCollection.createSpindleSliderBuilder() Created in NX10.0.2 |
interface |
SplitInsertBuilder
Creates split insert builder for progressive die.
|
interface |
SplitSolidBuilder
Represents a builder to be used to split a solid with geometry tools.
|
interface |
StandardPartBuilder
Represents a builder to be used to create Mold Wizard Standard Part.
|
interface |
StandardPartPositionBuilder
Represents a StandardPartPositionBuilder to add or edit a standard part in the selected plane with specified position.
|
interface |
StockSizeBuilder
Represents a Tooling::StockSizeBuilder builder.
|
interface |
StripLayoutBuilder
Represents a
StripLayoutBuilder
This class is for Strip Layout Design UI
To create a new instance of this class, use StripLayoutCollection.createStripLayoutBuilder() Created in NX6.0.0 |
interface |
StripLayoutStationInformationBuilder
Strip Layout Process Description Builder of Tooling.
|
interface |
StripperVentingBuilder
Stripper Venting Builder of PDW and EDW.
|
interface |
SubInsertBuilder
The SubInsert builder
To create a new instance of this class, use SubInsertCollection.createSubInsertBuilder() Default values. |
interface |
TraverseLoopBuilder
The builder class for Traverse Loop component which assists you
to select or traverse a string of adjacent curves or edges.
|
interface |
TrimMoldComponentsBuilder
Represents a builder to be used to create Mold Wizard trim mold components.
|
interface |
TrimRegionBuilder
Mold Wizard trim region management builder, trims a body to a boundary of edges, curves or bodies.
|
interface |
TrimSolidBuilder
Mold Wizard trim solid management builder, trims bounding box body with region, subtract
bounding box with workpiece or keep region and box.
|
interface |
UndersizeBuilder
Represents a
UndersizeBuilder To create a new instance of this class, use UndersizeCollection.createUndersizeBuilder() Default values. |
interface |
UnfoldingSimulationBuilder
Unfolding Simulation Builder of PDW and EDW.
|
interface |
UniversalUnformBuilder
Represents a
UniversalUnformBuilder builder. |
interface |
UnusedFileManagementBuilder
Represents a
UnusedFileManagementBuilder
Unused File Management is to manage the unused files of the project. |
interface |
UserDefinedMotionBuilder
Represents a
UserDefinedMotionBuilder to create user defined motion, which
contains linear and rotary motion To create a new instance of this class, use ProgressiveDieManager.createUserDefinedMotionBuilder() Default values. |
interface |
ValidCheckBuilder
This is the JA builder for static interference check
To create a new instance of this class, use ValidCheckCollection.createValidCheckBuilder() Default values. |
interface |
WallThicknessCheckerBuilder
Represents a builder to be used to perform wall thickness analysis.
|
interface |
WireHoleBuilder
Represents a
WireHoleBuilder
This class is for Wire Hole Design UI
To create a new instance of this class, use WireHoleCollection.createWireHoleBuilder() Default values. |
interface |
WorkpieceBuilder
Mold Wizard work piece builder
To create a new instance of this class, use WorkpieceCollection.createWorkpieceBuilder() Default values. |
Modifier and Type | Interface and Description |
---|---|
interface |
InstantiationBuilder
Represents a
InstantiationBuilder
To create a new instance of this class, use Collection.createInstantiationBuilder(nxopen.userdefinedtemplate.Instantiation) Created in NX10.0.0 |
Modifier and Type | Interface and Description |
---|---|
interface |
OverrideBuilder
Represents a
Override builder To create a new instance of this class, use ResultObject.createOverrideBuilder(nxopen.validate.Override) Default values. |
interface |
RequirementBuilder
Represents a
Requirement builder To create a new instance of this class, use RequirementCollection.createRequirementBuilder(nxopen.validate.Requirement) Default values. |
Modifier and Type | Interface and Description |
---|---|
interface |
SpecifyDateBuilder
Represents a Specify Date Builder
To create a new instance of this class, use VisualReportManager.createSpecifyDateBuilder() Created in NX8.0.0 |
interface |
VisualReportBuilder
A Builder for creating and editing
VisualReport s. |
Modifier and Type | Interface and Description |
---|---|
interface |
AutoPointBuilder
Represents a
AutoPointBuilder builder To create a new instance of this class, use WeldManager.createAutoPointBuilder(nxopen.features.Feature) Default values. |
interface |
AutoWeldSymbolsBuilder
Represents a
AutoWeldSymbolsBuilder builder To create a new instance of this class, use WeldManager.createAutoWeldSymbolsBuilder() Created in NX8.0.0 |
interface |
CharacteristicsBuilder
This builder allows you to define the attribute values to be set on the
output of the weld feature.
|
interface |
CompoundWeldBuilder
Represents a
CompoundWeld builder. |
interface |
ConnectedFaceFinderBuilder
Represents a builder to run the Connected Face Finder operation.
|
interface |
DatumCommonBuilder
Used to create or edit a
DatumSurface or DatumPin feature. |
interface |
DatumPinBuilder
Used to create or edit a
DatumPin feature. |
interface |
DatumSurfaceBuilder
Used to create or edit a
DatumSurface feature. |
interface |
EasyPatternBuilder
Represents the easy pattern builder.
|
interface |
EdgePrepBuilder
A builder used to create or edit a
EdgePrep feature. |
interface |
EdgePrepValuesBuilder
Used to view or edit the values used to define the welding joint and edge preparation.
|
interface |
ExportWeldBuilder
Represents a ExportWeldBuilder class
To create a new instance of this class, use WeldManager.createExportWeldBuilder() Default values. |
interface |
ExportWeldJointBuilder
Represents exporting weld joints.
|
interface |
FilletBuilder
Represents a
Fillet builder. |
interface |
GrooveBuilder
Represents a Groove Weld feature
To create a new instance of this class, use WeldManager.createWeldGrooveBuilder(nxopen.features.Feature) Created in NX5.0.0 |
interface |
InformationBuilder
This class is used by "Fabrication Information" to output fabrication objects information.
|
interface |
JointExitBuilder
Used to set custom edge preparation parameters of a
WeldJoint feaure. |
interface |
JointmarkBuilder
Represents a
Jointmark builder To create a new instance of this class, use WeldManager.createJointmarkBuilder(nxopen.weld.Jointmark) Default values. |
interface |
LocatorReferenceBuilder
This class is used by "Locator Reference" to add the additional component for a weld datum DF.
|
interface |
PlugSlotBuilder
Represents a
PlugSlot builder To create a new instance of this class, use WeldManager.createPlugSlotBuilder(nxopen.features.Feature) Default values. |
interface |
PointMarkBuilder
Used to create or edit a
PointMark feature. |
interface |
StructureWeldBuilder
This class is used to create or edit the information shared among all Structure Weld builders.
|
interface |
SurfaceWeldBuilder
Use to create or edit a
SurfaceWeld feature. |
interface |
TransformBuilder
Represents a
TransformBuilder builder To create a new instance of this class, use WeldManager.createTransformBuilder(nxopen.weld.Transform) Created in NX11.0.1 |
interface |
UserDefinedWeldBuilder
Represents a
UserDefinedWeldBuilder builder. |
interface |
WeldAdvisorBuilder
Represents a weld advisor test
To create a new instance of this class, use WeldManager.createWeldAdvisorBuilder() Created in NX7.5.0 |
interface |
WeldBeadBuilder
Used to create or edit a
WeldBead feature. |
interface |
WeldFillBuilder
A builder used to create or edit a
Fill feature. |
interface |
WeldFillStripBuilder
A builder used to create or edit a single strip of the
WeldFillBuilder . |
interface |
WeldGrooveBuilder
Represents a
WeldGroove builder To create a new instance of this class, use WeldManager.createWeldGroove1Builder(nxopen.features.Feature) Default values. |
interface |
WeldImportBuilder
Creates Weld features by reading a csv file
To create a new instance of this class, use WeldManager.createImportBuilder() Created in NX7.5.1 |
interface |
WeldJointBuilder
Used to create or edit a
WeldJoint feature. |
interface |
WeldLabelBuilder
Create weld labels for multiple welds and BIW locators, this builder's Commit can produce more than one object,
the GetCommittedObjects can be used to get the objects and the order of GetCommittedObject's output array is stable.
|
interface |
WeldPmiBuilder
Create PMI symbols for multiple structure welds, this builder's Commit can produce more than one object,
the GetCommittedObjects can be used to get the objects and the order of GetCommittedObject's output array is stable.
|
interface |
WeldPointBuilder
Represents a Spot Weld feature
To create a new instance of this class, use WeldManager.createWeldPointBuilder(nxopen.features.Feature) Default values. |
interface |
WeldPreferenceBuilder
Represents a
WeldPreferenceBuilder builder To create a new instance of this class, use WeldManager.createPreferenceBuilder() Default values. |
Copyright 2017 Siemens Product Lifecycle Management Software Inc. All Rights Reserved.