Package | Description |
---|---|
nxopen |
Provides classes and interfaces for the NX Open Common API.
|
nxopen.annotations |
Provides classes and interfaces relating to Dimensions, Notes, Symbols, PMI, and other Annotations.
|
nxopen.assemblies |
Provides classes and interfaces for Assemblies.
|
nxopen.assemblies.productinterface |
Provides classes and interfaces for Assembly Product Interfaces.
|
nxopen.cae |
Provides classes and interfaces relating to Advanced Simulation and Design Simulation.
|
nxopen.cae.modelcheck |
Provides classes and interfaces for Model Check.
|
nxopen.cae.optimization |
Provides classes and interfaces relating to Optimization.
|
nxopen.cae.responsesimulation |
Provides classes and interfaces for Response Simulation.
|
nxopen.cam |
Provides classes and interfaces for Manufacturing.
|
nxopen.cam.fbm |
Provides classes and interfaces for Manufacturing.
|
nxopen.die |
Provides classes and interfaces relating to Die Engineering and Die Design.
|
nxopen.display |
Provides classes and interfaces for display.
|
nxopen.drafting |
Provides classes and interfaces for the Drafting.
|
nxopen.drawings |
Provides classes and interfaces for Drafting Drawings.
|
nxopen.facet |
Provides classes and interfaces for Faceted Representations.
|
nxopen.features |
Provides classes and interfaces for features.
|
nxopen.features.sheetmetal |
Provides classes and interfaces for Sheet Metal Features.
|
nxopen.features.shipdesign |
Provides classes and interfaces for Ship Design.
|
nxopen.features.subdivision |
Provides classes and interfaces for Manufacturing.
|
nxopen.features.vehicledesign |
Provides classes and interfaces for the Vehicle Design.
|
nxopen.fields |
Provides classes and interfaces for Fields.
|
nxopen.formboard |
Provides interfaces and classes to the Routing Electrical Formboard functionality.
|
nxopen.gateway |
Provides classes and interfaces for Gateway.
|
nxopen.geometricanalysis |
Provides classes and interfaces for Geometric Analysis.
|
nxopen.geometricanalysis.sectionanalysis |
Provides classes and interfaces for Section Analysis.
|
nxopen.geometricutilities |
Provides classes and interfaces for Geometric Utilities.
|
nxopen.issue |
Provides classes and interfaces for the Issue Management.
|
nxopen.layout2d |
Provides classes and interfaces for Manufacturing.
|
nxopen.markup | |
nxopen.mechatronics |
Provides classes and interfaces for Mechatronics.
|
nxopen.modldirect |
Provides classes and interfaces for Direct Modeling.
|
nxopen.motion |
Provides classes and interfaces for Motion Simulation.
|
nxopen.optimization |
Provides classes and interfaces for Optimization.
|
nxopen.pdm |
Provides classes and interfaces for PDM.
|
nxopen.physmat |
Provides classes and interfaces for Physical Material.
|
nxopen.preferences |
Provides classes and interfaces for preferences.
|
nxopen.routing |
Provides classes and interfaces for Routing.
|
nxopen.routing.electrical |
Provides classes and interfaces for Routing Electrical.
|
nxopen.shapesearch |
Provides classes and interfaces for Shape Search.
|
nxopen.sim |
Provides classes and interfaces for Machine Tool Builder and CAM-Simulation.
|
nxopen.tooling |
Provides classes and interfaces for Tooling.
|
nxopen.userdefinedtemplate |
Provides classes and interfaces for Manufacturing.
|
nxopen.validate |
Provides classes and interfaces for Validation Utilities.
|
nxopen.visualreporting |
Provides classes and interfaces for Visual Reporting.
|
nxopen.weld |
Provides classes and interfaces for Weld.
|
Class and Description |
---|
BlendSetbackBuilder
This class provides ability to define a setback curve on a blend face.
|
BlendStopshortBuilderCollection
This class contains the factory methods for creating an BlendStopshortBuilder.
|
BoundaryDefinitionBuilder
Represents a
BoundaryDefinitionBuilder . |
BoundingObjectBuilder |
CAMDataPrepManager
Contains the create functions for builders.
|
CurveFitOptions
Represents the curve fit data
.
|
DraftPointData
Represents a draft point data object
To create an instance of this class, see DraftPointDataCollection.createDraftPointData(nxopen.Point, java.lang.String) Created in NX4.0.0 |
FacePlaneSelectionBuilderCollection
This class contains the factory methods for creating an FacePlaneSelectionBuilder.
|
FaceSetDataCollection
Deprecated.
Deprecated in NX8.5.0. This class is never used and can be safely removed
|
FaceSetOffsetCollection
This class contains the factory methods for creating an face set offset.
|
GeometryLocationDataCollection
This class contains the factory methods for creating GeometryLocationData.
|
IComponentBuilder
Represents a component contained in a builder
.
|
LocalUntrimManager
Provides create builder methods for LocalUntrimBuilder
To obtain an instance of this class, refer to Part Created in NX9.0.0 |
OmnicadManager
Represents a manager for creating builder objects for OmniCAD Free Transformer
To obtain an instance of this class, refer to Part Created in NX10.0.0 |
OnPathDimensionBuilder
Builds an on-path dimension .
|
PatternDefinition
pattern spacing for several pattern based commands.
|
PointSetAlignmentBuilder
This class performs a point set to point set alignment
To create a new instance of this class, use Part.createPointSetAlignmentBuilder() Default values. |
PointsFromFileBuilder
Represents a
PointsFromFileBuilder builder
read points from a text file with format *.asc, *.txt, *.dat, *.pts
To create a new instance of this class, use Part.createPointsFromFileBuilder() Created in NX8.5.0 |
SelectionList
Represents a
SelectionList To create a new instance of this class, use Part.createSelectionList() Created in NX8.0.0 |
SpinePointDataCollection
This class contains the factory methods for creating a SpinePointData object.
|
TransitionCurveBuilder
This class provides ability to create a transition(bridge) curve between two adjacent setback curves.
|
TwoExpressionsCollectorSet
Represents a two dimension list item builder
To create a new instance of this class, use Part.createEmptyTwoExpressionsCollectorSet() Created in NX8.5.0 |
TwoExpressionsSectionSet
Represents a two dimension list section item builder
To create a new instance of this class, use Part.createEmptyTwoExpressionsSectionSet() Created in NX9.0.0 |
WaveLinkRepository
Represents a
WaveLinkRepository . |
Class and Description |
---|
IComponentBuilder
Represents a component contained in a builder
.
|
Class and Description |
---|
IComponentBuilder
Represents a component contained in a builder
.
|
PatternDefinition
pattern spacing for several pattern based commands.
|
Class and Description |
---|
IComponentBuilder
Represents a component contained in a builder
.
|
Class and Description |
---|
IComponentBuilder
Represents a component contained in a builder
.
|
Class and Description |
---|
IComponentBuilder
Represents a component contained in a builder
.
|
Class and Description |
---|
IComponentBuilder
Represents a component contained in a builder
.
|
Class and Description |
---|
IComponentBuilder
Represents a component contained in a builder
.
|
Class and Description |
---|
IComponentBuilder
Represents a component contained in a builder
.
|
Class and Description |
---|
IComponentBuilder
Represents a component contained in a builder
.
|
Class and Description |
---|
CurveLengthData
Represents an CurveLength data.
|
IComponentBuilder
Represents a component contained in a builder
.
|
Limits
Represents a limits data.
|
OnPathDimensionBuilder
Builds an on-path dimension .
|
Class and Description |
---|
IComponentBuilder
Represents a component contained in a builder
.
|
Class and Description |
---|
IComponentBuilder
Represents a component contained in a builder
.
|
ModlMotion |
Class and Description |
---|
IComponentBuilder
Represents a component contained in a builder
.
|
Class and Description |
---|
BoundaryDefinitionBuilderList
Represents a list of objects.
|
IComponentBuilder
Represents a component contained in a builder
.
|
Class and Description |
---|
AlignmentMethodBuilder |
BetweenLocationsData |
BlendLimitsData |
BlendSetbackBuilder
This class provides ability to define a setback curve on a blend face.
|
BlendSetbackBuilderList
Represents a list of objects.
|
BlendStopshortBuilder |
BlendStopshortBuilder.Choices
This enum represents the choice for stopshort option.
|
BooleanOperation
Represents a boolean operation .
|
BooleanRegionSelect
a class which defines boolean region select.
|
BooleanToolBuilder
a class which defines boolean tool builder.
|
BoundingObjectBuilderList
Represents a list of objects.
|
BridgeCurveConnectivity
Data offering connectivity controls for
BridgeCurveBuilderEx . |
CircularCrossSection
Represents a circular section data for face blend.
|
ColorCodedRegionBuilder
Represents a
ColorCodedRegionBuilder . |
ConicCrossSection
Represents a conic section data for face blend.
|
Continuity
Represents a
Continuity
Allows user to specify continuity constraint surface construction. |
ControlPoleManagerData
This class manages the control poles for a set of surfaces or curves.
|
ConvertFeatureGroupsToModulesBuilder
Represents a
ConvertFeatureGroupsToModulesBuilder builder To create a new instance of this class, use FeatureCollection.createConvertFeatureGroupsToModulesBuilder() Created in NX9.0.0 |
CurveExtensionBuilder
Spline extension builder class.
|
CurveFitData
Represents the curve fitting methods options.
|
CurveFitJoin
Represents the curve fit join data
.
|
CurveFitOptions
Represents the curve fit data
.
|
CurveLengthData
Represents an CurveLength data.
|
CurveLimitsData |
CurveOptions
Represents the curve options data
.
|
CurveRangeBuilder
Represents the curve range and anchor builder .
|
CurveShapingBuilder
Represents a
CurveShapingBuilder . |
DegreesAndSegmentsOrPatchesBuilder
the DegreesAndSegmentsOrPatches builder .
|
DepthSkewBuilder
This class provides ability to specify a depth and a skew value.
|
DraftVariableAngleData
Represents data containing variable angle draft point data objects
This class will not be created by the user. |
EndHoleData |
FaceSetData |
FaceSetOffset
This class represents a face set (collector) offset data.
|
FaceSetOffsetList
Represents a list of objects.
|
FeatureOffset
Represents a Offset .
|
FeatureOptions
Represents various options supported on features.
|
FrameOnPathBuilder
Frame on path builder .
|
FtmFixedCurvesBuilderList
Represents a list of objects.
|
FtmTransformCurvesBuilderList
Represents a list of objects.
|
FtmTransformPointsBuilderList
Represents a list of objects.
|
IComponentBuilder
Represents a component contained in a builder
.
|
LawBuilder
Represents a LawBuilder .
|
Limits
Represents a limits data.
|
MiddleHoleData |
ModlMotion |
MovePoleBuilder
This class manages the control poles movements for a surface or curve.
|
MultiDraft
Represents a multi-draft.
|
NestModuleBuilder
Deprecated.
Deprecated in NX10.0.0. Use
FeatureCollection instead.
|
OnPathDimensionBuilder
Builds an on-path dimension .
|
OrientationMethodBuilder |
OrientXpressBuilder
Represent the OrientXpress block
OrientXpress is not supported in KF. |
PartModuleInputBuilder
Represents a
PartModuleInputBuilder To create a new instance of this class, use PartModule.createPartModuleInputBuilder() Default values. |
PartModuleOutputBuilder
Represents a
PartModuleOutputBuilder To create a new instance of this class, use PartModule.createPartModuleOutputBuilder() Created in NX8.0.0 |
PartModuleOutputBuilder1
Represents a
PartModuleOutputBuilder1 To create a new instance of this class, use PartModule.createPartModuleOutputBuilder1() Default values. |
PartModuleReferencesBuilder |
PartModuleRelationshipBuilder
Represents a
Features.PartModule builder To create a new instance of this class, use FeatureCollection.createPartModuleRelationshipBuilder(nxopen.features.PartModule) Created in NX8.0.0 |
PatternDefinition
pattern spacing for several pattern based commands.
|
PatternReferencePointServiceBuilder
Pattern Reference Point is a service which enables the employing client to compute the reference point for pattern instance locations.
|
ProjectionOptions
Represents a ProjectionOptions .
|
Rebuild
Represents a
Rebuild . |
RectangularFrameBuilder
Rectangular frame builder .
|
RefitControlBuilder
This class is used to specify the parameter set to refit faces .
|
RenameLinkedPartModulePartBuilder
Represents a
Features.PartModule builder To create a new instance of this class, use FeatureCollection.createRenameLinkedPartModulePartBuilder() Created in NX9.0.0 |
ReplAsstBuilder
Represents a
ReplAsstBuilder . |
RotationSetBuilder |
RotationSetBuilderList
Represents a list of objects.
|
SaveConstraintsBuilder
Represents a builder for a Save Constraints.
|
ScalingMethodBuilder |
ScalingSetBuilder |
ScalingSetBuilderList
Represents a list of objects.
|
SecondarySectionData |
SelectDividingObjectBuilder
Represents the dividing tool block for dividing face .
|
SmartVolumeProfileBuilder
This class contains the options for automatically closing the profile to surrounding model geometry.
|
SpineDefinitionBuilder
Provides a spine definition for modeling operations .
|
SplineExtensionBuilder
Spline extension builder class.
|
StartHoleData |
StepOptionBehavior
Represents a
StepOptionBehavior
It provides several step options for controlling behavior when
move face and so on. |
StyledSweepDoubleOnPathDimBuilder |
StyledSweepDoubleOnPathDimBuilderList
Represents a list of objects.
|
StyledSweepReferenceMethodBuilder |
SupportPlaneData |
SurfaceRangeBuilder
Represents the surface range and anchor builder .
|
TangentMagnitudeBuilder
This class provides ability to specify the start and end
tangent magnitude values.
|
TransformerData
Transformation and orientation tool.
|
TransitionCurveBuilder
This class provides ability to create a transition(bridge) curve between two adjacent setback curves.
|
TransitionCurveBuilderList
Represents a list of objects.
|
TwoExpressionsCollectorSetList
Represents a list of objects.
|
TwoExpressionsSectionSetList
Represents a list of objects.
|
UnnestModuleBuilder
Deprecated.
Deprecated in NX10.0.0. Use
FeatureCollection instead.
|
Class and Description |
---|
IComponentBuilder
Represents a component contained in a builder
.
|
Class and Description |
---|
CurveLengthData
Represents an CurveLength data.
|
IComponentBuilder
Represents a component contained in a builder
.
|
OnPathDimensionBuilder
Builds an on-path dimension .
|
ProjectionOptions
Represents a ProjectionOptions .
|
Class and Description |
---|
IComponentBuilder
Represents a component contained in a builder
.
|
TransformerData
Transformation and orientation tool.
|
Class and Description |
---|
IComponentBuilder
Represents a component contained in a builder
.
|
Class and Description |
---|
IComponentBuilder
Represents a component contained in a builder
.
|
Class and Description |
---|
IComponentBuilder
Represents a component contained in a builder
.
|
Class and Description |
---|
IComponentBuilder
Represents a component contained in a builder
.
|
Class and Description |
---|
CombOptionsBuilder |
CurveRangeBuilder
Represents the curve range and anchor builder .
|
DisplayResolutionBuilder
Represents a
DisplayResolutionBuilder . |
IComponentBuilder
Represents a component contained in a builder
.
|
SurfaceRangeBuilder
Represents the surface range and anchor builder .
|
Class and Description |
---|
CircularFrameBuilder |
CombOptionsBuilder |
IComponentBuilder
Represents a component contained in a builder
.
|
InteractiveSectionBuilder
Represents a
InteractiveSectionBuilder . |
QuadrilateralFrameBuilder |
TriangularFrameBuilder |
Class and Description |
---|
AlignmentMethodBuilder.AlignFillerSurfaceType
Filler surface types
|
AlignmentMethodBuilder.AllPointsData
This class holds the data returned from
AlignmentMethodBuilder.getAllPoints() |
AlignmentMethodBuilder.Type
Alignment types supported
|
AlongPathPattern
the AlongPath pattern definition.
|
AlongPathPattern.PathOptions
This defines path options
|
AlongPathPattern.YDirectionOptions
This defines y direction Types
|
AlongSpineBuilder |
AlongSpineBuilder.RetainSpineOption
Represents the Spine option.
|
AnchorLocatorBuilder |
AngularPatternSpacing
defines the various ways pattern instances can be
spaced within the pattern, particularly in the context of the
PatternDefinition class.
|
AngularPatternSpacing.UsePitchOptions
This defines Use Pitch As options
|
BlendSetbackBuilder
This class provides ability to define a setback curve on a blend face.
|
BlendSetbackBuilder.Directions
Setback direction options
|
BlendStopshortBuilder |
BlendStopshortBuilder.Choices
This enum represents the choice for stopshort option.
|
BooleanOperation
Represents a boolean operation .
|
BooleanOperation.BooleanOperationAndBodyData
This class holds the data returned from
BooleanOperation.getBooleanOperationAndBody() |
BooleanOperation.BooleanType
Boolean operation type.
|
BooleanRegionSelect.KeepRemoveOption
the keep/remove options for selected region
|
BooleanRegionSelect.SelectOption
the region selection method
|
BooleanToolBuilder.BooleanToolType
the boolean tool created options
|
BoundaryDefinitionBuilder
Represents a
BoundaryDefinitionBuilder . |
BoundingObjectBuilder |
BoundingObjectBuilder.Method
Represents Bounding Object option types.
|
BridgeCurveConnectivity.CurveDirectionOptions
Tangent constraint direction when end is attached to a section
|
BridgeCurveConnectivity.FaceDirectionOptions
Tangent constraint direction when end is attached to a face
|
CircularFrameBuilder.Subtypes
Represents the circular frame subtypes
|
CircularPattern
the circular pattern definition.
|
CircularPattern.StaggerOptions
defines any stagger to be defined on the pattern.
|
CombOptionsBuilder.AnalysisTypes
Represents the Analysis types
|
CombOptionsBuilder.LabelTypes
Represents the Label types
|
ConicCrossSection.DefineMethod
This enum represents the conic method for advanced symmetric conic
|
ConicCrossSection.DepthMethod
This enum represents the depth option
|
ConicCrossSection.OffsetMethod
This enum represents the offset options
|
ConicCrossSection.RhoMethod
This enum represents the rho options
|
ConicCrossSection.ShapeSkewMethod
This enum represents the shape skew option
|
Continuity
Represents a
Continuity
Allows user to specify continuity constraint surface construction. |
Continuity.ContinuityTypes
Continuity type.
|
ControlPoleManagerData
This class manages the control poles for a set of surfaces or curves.
|
ControlPoleManagerData.PolesData
This class holds the data returned from
ControlPoleManagerData.getPoles(int) |
CurveExtendData |
CurveExtendData.LimitOptions
Represents the curve extend options for associative basic curves
|
CurveExtensionBuilder.ExtensionOption
Spline extension options
|
CurveFitData.Join
Represents the curve join method
|
CurveFitData.Method
Represents the curve fitting method in the case of advanced fitting
|
CurveFitJoin.JoinMethod
Represents the curve join method
|
CurveFitOptions
Represents the curve fit data
.
|
CurveFitOptions.FitMethod
Represents the curve fit method
|
CurveOptions.InputCurve
Represents the input curve options
|
CurveRangeBuilder.AnchorPositionType
Represents the anchor position type
|
CurveShapingBuilder.InsertionMethodOptions
Point insertion option
|
CurveShapingBuilder.MovementMethodType
Curve parameter points movement types
|
CurveShapingBuilder.WCSOptionType
WCS principal axis or plane types
|
DegreesAndSegmentsOrPatchesBuilder
the DegreesAndSegmentsOrPatches builder .
|
DistancePatternSpacing
defines the various ways pattern instances can be
spaced within the pattern, particularly in the context of the
PatternDefinition class.
|
DraftPointData
Represents a draft point data object
To create an instance of this class, see DraftPointDataCollection.createDraftPointData(nxopen.Point, java.lang.String) Created in NX4.0.0 |
EndHoleData.FormOptions
Represents hole form options.
|
EndHoleData.HoleDepthLimitOptions
Represents hole depth limit options for threaded hole in end plate of hole series.
|
EndHoleData.ThreadLengthOptions
Represents thread length options.
|
EndHoleData.ThreadRotationOptions
Represents thread rotation options.
|
EntityUsageInfo
Represents a
EntityUsageInfo . |
EntityUsageInfo.DependentFeaturesData
This class holds the data returned from
EntityUsageInfo.getDependentFeatures(nxopen.geometricutilities.EntityUsageInfo.Status) |
EntityUsageInfo.OtherDependentsData
This class holds the data returned from
EntityUsageInfo.getOtherDependents(nxopen.geometricutilities.EntityUsageInfo.Status) |
EntityUsageInfo.Status
enum for usage status
|
EntityUsageInfoList
Represents a list of objects.
|
Extend
Represents an extend data.
|
Extend.ExtendType
This enum represents the type of extend
|
ExtensionMethod
This enum represents the extension method
|
ExtensionSide
This enum represents the extension side
|
ExtrudeRevolveToolBuilder
a class which is a sub-component of BooleanTool.
|
FacePlaneSelectionBuilder |
FacePlaneSelectionBuilder.TrimObjectType
Specifies the object type for blend endcap objects.
|
FacePlaneToolBuilder
a sub-component of BooleanToolBuilder.
|
FaceSetData |
FaceSetOffset
This class represents a face set (collector) offset data.
|
FeatureOptions.BodyStyle
This enum represents the various body types
|
FrameOnPathBuilder.AnchorLocationType
Anchor location types
|
FtmFixedCurvesBuilder
Represents a
FtmFixedCurvesBuilder builder
To create a new instance of this class, use OmnicadManager.createFtmFixedCurvesBuilder() Default values. |
FtmFixedCurvesBuilder.FixedCurvesContinuityType
Fixed curves continuity type
|
FtmTransformCurvesBuilder
Represents a
FtmTransformCurvesBuilder builder
To create a new instance of this class, use OmnicadManager.createFtmTransformCurvesBuilder() Default values. |
FtmTransformCurvesBuilder.TransformCurvesContinuityType
Transform curves continuity type
|
FtmTransformPointsBuilder
Represents a
FtmTransformPointsBuilder builder
To create a new instance of this class, use OmnicadManager.createFtmTransformPointsBuilder() Created in NX10.0.0 |
GeneralPattern
the General pattern definition.
|
GeneralPattern.FromLocationOptions
the from location options.
|
GeometryLocationData
Represents a
GeometryLocationData
To create a new instance of this class, use GeometryLocationDataCollection.createGeometryLocationData() Created in NX5.0.0 |
GeometryLocationData.EntityTypes
Represents the entity type.
|
HelixPattern
the Helix pattern definition.
|
HelixPattern.DirectionTypes
This defines helix direction method
|
HelixPattern.SizeOptions
defines Helix size options for Helix type pattern.
|
HorizontalReference
the horizontal reference vector definition.
|
IComponentBuilder
Represents a component contained in a builder
.
|
InstanceEditedExpressionItem
edited value of one master expression of the input object(s) being patterned.
|
InstanceEditedExpressionItemList
Represents a list of objects.
|
InstanceEditedExpressionsList
list of
InstanceEditedExpressionItem objects. |
LawBuilder
Represents a LawBuilder .
|
LawBuilder.RetainLawCurveOption
Describes the option on whether to retain the original profile.
|
LawBuilder.Type
The law types
|
Limits
Represents a limits data.
|
LocalUntrimBuilder
Represents a
LocalUntrimBuilder builder. |
MatchSurfaceBuilder
Represents a
MatchSurfaceBuilder builder.This builder's Commit can create a b-surface To create a new instance of this class, use CAMDataPrepManager.createMatchSurfaceBuilder() Default values. |
MatchSurfaceBuilder.MatchConstaint
This enum represents the type of constaints
|
MirrorPattern
the Mirror pattern definition.
|
MirrorPattern.PlaneOptions
the Plane options.
|
ModlAlongCurveAngle |
ModlDistanceAngle |
ModlMotion |
ModlMotion.Delta
Represents the options of Delta XYZ.
|
ModlMotion.Options
Represents the options of Motion.
|
MovePoleBuilder.MoveMethodType
Move Pole types
|
MovePoleBuilder.WCSDirectionType
WCS direction
|
MultiDraft.AngleOption
Represents the angle option.
|
MultiTransitionLawBuilder
Represents multiple transition law.
|
NonInflectingLawBuilder
Represents a non-inflecting law.
|
OnPathDimensionBuilder
Builds an on-path dimension .
|
OnPathDimensionBuilder.UpdateReason
The type of update to perform
|
OnPathDimWithValueBuilder |
OnPathDistancePatternSpacing
defines the various ways pattern instances can be
spaced within the pattern, particularly in the context of the
PatternDefinition class.
|
OrientationMethodBuilder.OrientationOptions
This enum represents the orientation option.
|
OrientXpressBuilder
Represent the OrientXpress block
OrientXpress is not supported in KF. |
OrientXpressBuilder.Axis
the active axis option
|
OrientXpressBuilder.Plane
the active plane option
|
OrientXpressBuilder.Reference
the option for reference csys
|
ParentEquivalencyMap
Represents a
ParentEquivalencyMap . |
ParentEquivalencyMap.Status
enum for map status
|
ParentEquivalencyMap.Type
enum for map type
|
ParentEquivalencyMapList
Represents a list of objects.
|
PartModuleInputBuilder.ModifiableGeometryOptions
the Modifiable Geometry option types
|
PartModuleReferencesBuilder |
PatternClocking
Deprecated.
Deprecated in NX8.0.0. This functionality is no longer supported.
|
PatternClocking.ClockingType
Deprecated.
type of pattern clocking to transform individual instances
|
PatternClockingBuilder
enables the ability to apply delta transforms on individual instances of a pattern within the pattern feature
To create a new instance of this class, use PatternDefinition.createClockingBuilder(int, int) Default values. |
PatternClockingBuilder.ClockingType
type of pattern clocking to transform individual instances
|
PatternDefinition.PatternEnum
pattern types available.
|
PatternFill
the pattern fill definition.
|
PatternFill.PatternFillOptions
This defines Fill Types
|
PatternIncrementItem
variational for one master expression of the input object(s) being patterned.
|
PatternIncrementItem.OperationEnum
increment operation option.
|
PatternIncrementItemList
Represents a list of objects.
|
PatternIncrementsBuilder
pattern increments builder .
|
PatternIncrementsList
list of
PatternIncrementItem objects. |
PatternInstanceEditBuilder
pattern instance edit builder
To create a new instance of this class, use PatternDefinition.createPatternInstanceEditBuilder() Created in NX7.5.0 |
PatternOrientation
the pattern orientation definition.
|
PatternOrientation.Enum
pattern orientation options for all pattern types.
|
PatternOrientation.ProjDirEnum
pattern follow face project direction options available.
|
PatternSpacing
defines the various ways pattern instances can be
spaced within the pattern, particularly in the context of the
PatternDefinition class.
|
PatternSpacing.SpacingType
defines the type of spacing instances can have within a pattern.
|
PatternSpacingsList
list of
PatternSpacingsListItem objects. |
PatternSpacingsListItem
one pattern spacing in the spacings list
To create a new instance of this class, use PatternSpacingsList.createPatternSpacingsListItem() Created in NX8.0.0 |
PatternSpacingsListItemList
Represents a list of objects.
|
PointSetAlignmentBuilder.ConstraintOptions
Constraint Options
|
PointsFromFileBuilder.Options
Coordinate option
|
PolygonPattern
the polygon pattern definition.
|
PolygonPattern.SizeOptions
defines polygon size options for polygon type pattern.
|
PolygonPatternSpacing
defines the various ways pattern instances can be
spaced within the pattern, particularly in the context of the
PatternDefinition class.
|
ProjectionOptions.DirectionType
This enum represents the projection direction types
|
QuadrilateralFrameBuilder.Subtypes
Represents the quadrialteral frame subtypes
|
RadiusMethod
This enum represents the radius options
|
Rebuild.DegreeTypes
This enum represents the degree type when the Rebuild option menu is set to None.
|
Rebuild.RebuildTypes
This enum represents the Rebuild type.
|
RectangularFrameBuilder.AnchorLocationType
Anchor location types
|
RectangularPattern
the rectangular pattern definition.
|
RectangularPattern.SimplifiedLayoutTypes
defines simplified layout type for linear pattern.
|
RectangularPattern.StaggerOptions
defines any stagger to be defined on the pattern.
|
ReduceSurfaceRadiusBuilder
Reduce Surface Radius Builder of Geometric Utilities.
|
ReduceSurfaceRadiusBuilder.FaceSelectionSpecification
Specify the face selection type.
|
ReduceSurfaceRadiusBuilder.ReducedFaceTypeSpecification
Specify three ways to do preview.
|
ReduceSurfaceRadiusBuilder.ReduceValueTypeSpecification
Specify the reduction method.
|
ReduceSurfaceRadiusFaceGroupBuilderList
Represents a list of objects.
|
ReferencePattern
the reference pattern definition.
|
RefitControlBuilder.RefitControlDirection
Refit direction
|
RefitControlBuilder.RefitControlMethod
Refit method
|
RegionTracker
a class which collects all the geometric entities used to identify a region of faces during a boolean feature.
|
RegionTracker.ExtremityType
This enum represents the type of edge extremity.
|
RegionTracker.VertexSelectorsData
This class holds the data returned from
RegionTracker.getVertexSelectors() |
RotationSetBuilder |
ScalingMethodBuilder.BlendingFunctionTypes
This enum represents the blending function type, if the scaling by BlendingFunction is selected.
|
ScalingMethodBuilder.ScalingOptions
This enum represents the scaling method option.
|
ScalingSetBuilder |
SectionPlaneData
Represents a Section Plane Data class
This class acts like a container to hold the data needed to create a plane.
|
SelectDividingObjectBuilder.IsoparametricDirectionType
Represents the direction of isoparametric curve
|
SelectDividingObjectBuilder.ToolType
Represents the Dividing Tool types
|
SelectionList
Represents a
SelectionList To create a new instance of this class, use Part.createSelectionList() Created in NX8.0.0 |
SelectionListList
Represents a list of objects.
|
ShapeFrameBuilder |
ShapeFrameBuilder.AnchorAttachmentType
Represents the anchor attachment type
|
SimpleDraft
Represents an Offset .
|
SimpleDraft.SimpleDraftType
This enum represents the kind of simple_draft
|
SmartVolumeProfileBuilder.CloseProfileRuleType
the type of profile closures to be performed
|
SnipIntoPatchesBuilder
Represents a
SnipIntoPatchesBuilder builder. |
SpineDefinitionBuilder.MethodOptions
Options to define a spine
|
SpinePointData
Represents a spine point def object
To create an instance of this class, see nxopen.geometricutilities Created in NX5.0.0 |
SpinePointData.ParameterType
Parameter type
|
SpiralPattern
the Spiral pattern definition.
|
SpiralPattern.OrientType
This defines spiral direction method
|
SpiralPattern.SpiralDefineSize
This defines size spiral type
|
SplineExtensionBuilder.ExtensionOption
Spline extension options
|
SShapedLawBuilder
Represents a s-shaped law.
|
StartHoleData.HoleForms
This enum represents hole form options in start plate of hole series.
|
StepOptionBehavior.StepOptionType
Step Faec options
|
StyledSweepDoubleOnPathDimBuilder |
StyledSweepReferenceMethodBuilder.ReferenceOptions
This enum represents the orientation reference option.
|
SupportPlaneData.LockPlaneStatus
Represents support plane lock status for associative basic curves
|
SurfaceRangeBuilder.AnchorPositionType
Represents the anchor position type
|
TransformerData.ObjectType
Type of objects.
|
TransitionCurveBuilder
This class provides ability to create a transition(bridge) curve between two adjacent setback curves.
|
TransitionCurveBuilder.TangentDirections
Tangent direction options
|
TransitionLawNodeBuilderList
Represents a list of objects.
|
TriangularFrameBuilder.Subtypes
Represents the triangular frame subtypes
|
TwoExpressionsCollectorSet
Represents a two dimension list item builder
To create a new instance of this class, use Part.createEmptyTwoExpressionsCollectorSet() Created in NX8.5.0 |
TwoExpressionsSectionSet
Represents a two dimension list section item builder
To create a new instance of this class, use Part.createEmptyTwoExpressionsSectionSet() Created in NX9.0.0 |
Type
This enum represents the kind of offset
|
Class and Description |
---|
IComponentBuilder
Represents a component contained in a builder
.
|
Class and Description |
---|
IComponentBuilder
Represents a component contained in a builder
.
|
Class and Description |
---|
IComponentBuilder
Represents a component contained in a builder
.
|
Class and Description |
---|
IComponentBuilder
Represents a component contained in a builder
.
|
Class and Description |
---|
IComponentBuilder
Represents a component contained in a builder
.
|
Class and Description |
---|
IComponentBuilder
Represents a component contained in a builder
.
|
Class and Description |
---|
IComponentBuilder
Represents a component contained in a builder
.
|
Class and Description |
---|
IComponentBuilder
Represents a component contained in a builder
.
|
Class and Description |
---|
IComponentBuilder
Represents a component contained in a builder
.
|
Class and Description |
---|
IComponentBuilder
Represents a component contained in a builder
.
|
Class and Description |
---|
IComponentBuilder
Represents a component contained in a builder
.
|
ModlMotion |
OnPathDimensionBuilder
Builds an on-path dimension .
|
OnPathDimWithValueBuilder |
Class and Description |
---|
IComponentBuilder
Represents a component contained in a builder
.
|
Class and Description |
---|
IComponentBuilder
Represents a component contained in a builder
.
|
Class and Description |
---|
IComponentBuilder
Represents a component contained in a builder
.
|
Class and Description |
---|
BooleanOperation
Represents a boolean operation .
|
IComponentBuilder
Represents a component contained in a builder
.
|
ModlMotion |
SurfaceRangeBuilder
Represents the surface range and anchor builder .
|
Class and Description |
---|
IComponentBuilder
Represents a component contained in a builder
.
|
Class and Description |
---|
IComponentBuilder
Represents a component contained in a builder
.
|
Class and Description |
---|
IComponentBuilder
Represents a component contained in a builder
.
|
Class and Description |
---|
IComponentBuilder
Represents a component contained in a builder
.
|
OnPathDimensionBuilder
Builds an on-path dimension .
|
ProjectionOptions
Represents a ProjectionOptions .
|
Copyright 2011 Siemens Product Lifecycle Management Software Inc. All Rights Reserved.