public interface EndHoleData extends TaggedObject, IComponentBuilder
Modifier and Type | Interface and Description |
---|---|
static class |
EndHoleData.FormOptions
Represents hole form options.
|
static class |
EndHoleData.HoleDepthLimitOptions
Represents hole depth limit options for threaded hole in end plate of hole series.
|
static class |
EndHoleData.ThreadLengthOptions
Represents thread length options.
|
static class |
EndHoleData.ThreadRotationOptions
Represents thread rotation options.
|
Modifier and Type | Method and Description |
---|---|
BooleanOperation |
booleanOperation()
Returns the boolean operation
License requirements: None. |
String |
fitOption()
Returns the fit option
License requirements: None. |
EndHoleData.FormOptions |
formOption()
Returns the form option
License requirements: None. |
Expression |
holeDepth()
Returns the hole depth
License requirements: None. |
EndHoleData.HoleDepthLimitOptions |
holeDepthLimitOption()
Returns the hole depth limit
License requirements: None. |
Expression |
holeDiameter()
Returns the hole diameter
License requirements: None. |
boolean |
matchDimOfStartHole()
Returns the match dim of start hole
License requirements: None. |
String |
radialEngageOption()
Returns the radial engage option
License requirements: None. |
boolean |
reliefChamferEnabled()
Returns the threaded relief chamfer enabled - this is applicable for threaded hole type
License requirements: None. |
Expression |
screwClearanceEndChamferAngle()
Returns the screw clearance end chamfer angle
License requirements: None. |
boolean |
screwClearanceEndChamferEnabled()
Returns the screw clearance end chamfer enabled
License requirements: None. |
Expression |
screwClearanceEndChamferOffset()
Returns the screw clearance end chamfer offset
License requirements: None. |
Expression |
screwClearanceStartChamferAngle()
Returns the screw clearance start chamfer angle
License requirements: None. |
boolean |
screwClearanceStartChamferEnabled()
Returns the screw clearance start chamfer enabled
License requirements: None. |
Expression |
screwClearanceStartChamferOffset()
Returns the screw clearance start chamfer offset
License requirements: None. |
void |
setFitOption(String fitOption)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setFormOption(EndHoleData.FormOptions formOption)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setHoleDepthLimitOption(EndHoleData.HoleDepthLimitOptions holeDepthLimitOption)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setMatchDimOfStartHole(boolean matchDimOfStartHole)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setRadialEngageOption(String radialEngageOption)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setReliefChamferEnabled(boolean reliefChamferEnabled)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setScrewClearanceEndChamferEnabled(boolean screwClearanceEndChamferEnabled)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setScrewClearanceStartChamferEnabled(boolean screwClearenceStartChamferEnabled)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setThreadedEndChamferEnabled(boolean threadedEndChamferEnabled)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setThreadedReliefEnabled(boolean threadedReliefEnabled)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setThreadedStartChamferEnabled(boolean threadedStartChamferEnabled)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setThreadLengthOption(EndHoleData.ThreadLengthOptions threadLengthOption)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setThreadRotation(EndHoleData.ThreadRotationOptions threadRotation)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
setThreadSize(String threadSize)
License requirements: solid_modeling ("SOLIDS MODELING") . |
Expression |
tapDrillDiameter()
Returns the tap drill diameter
License requirements: None. |
Expression |
threadDepth()
Returns the thread depth
License requirements: None. |
Expression |
threadedEndChamferAngle()
Returns the threaded end chamfer angle
License requirements: None. |
Expression |
threadedEndChamferDiameter()
Returns the threaded end chamfer offset
License requirements: None. |
boolean |
threadedEndChamferEnabled()
Returns the threaded end chamfer enabled
License requirements: None. |
Expression |
threadedReliefAngle()
Returns the relief angle - this is applicable for threaded hole type
License requirements: None. |
Expression |
threadedReliefChamferAngle()
Returns the threaded relief chamfer angle - this is applicable for threaded hole type
License requirements: None. |
Expression |
threadedReliefChamferOffset()
Returns the threaded relief chamfer offset - this is applicable for threaded hole type
License requirements: None. |
Expression |
threadedReliefDepth()
Returns the threaded relief depth - this is applicable for threaded hole type
License requirements: None. |
Expression |
threadedReliefDiameter()
Returns the relief diameter - this is applicable for threaded hole type
License requirements: None. |
boolean |
threadedReliefEnabled()
Returns the threaded relief enabled - this is applicable for threaded hole type
License requirements: None. |
Expression |
threadedStartChamferAngle()
Returns the threaded start chamfer angle
License requirements: None. |
Expression |
threadedStartChamferDiameter()
Returns the threaded start chamfer offset
License requirements: None. |
boolean |
threadedStartChamferEnabled()
Returns the threaded start chamfer enabled
License requirements: None. |
EndHoleData.ThreadLengthOptions |
threadLengthOption()
Returns the thread length option
License requirements: None. |
EndHoleData.ThreadRotationOptions |
threadRotation()
Returns the thread rotation
License requirements: None. |
String |
threadSize()
Returns the thread size
License requirements: None. |
Expression |
tipAngle()
Returns the tip angle
License requirements: None. |
SelectFace |
untilSelectedTarget()
Returns the until selected target - this is applicable for general hole and threaded hole type
License requirements: None. |
printTestData, printTestData, tag, tagValue
validate
boolean matchDimOfStartHole() throws NXException, RemoteException
NXException
RemoteException
void setMatchDimOfStartHole(boolean matchDimOfStartHole) throws NXException, RemoteException
matchDimOfStartHole
- NXException
RemoteException
EndHoleData.FormOptions formOption() throws NXException, RemoteException
NXException
RemoteException
void setFormOption(EndHoleData.FormOptions formOption) throws NXException, RemoteException
formOption
- NXException
RemoteException
String threadSize() throws NXException, RemoteException
NXException
RemoteException
void setThreadSize(String threadSize) throws NXException, RemoteException
threadSize
- NXException
RemoteException
Expression tapDrillDiameter() throws NXException, RemoteException
NXException
RemoteException
EndHoleData.ThreadLengthOptions threadLengthOption() throws NXException, RemoteException
NXException
RemoteException
void setThreadLengthOption(EndHoleData.ThreadLengthOptions threadLengthOption) throws NXException, RemoteException
threadLengthOption
- NXException
RemoteException
Expression threadDepth() throws NXException, RemoteException
NXException
RemoteException
EndHoleData.ThreadRotationOptions threadRotation() throws NXException, RemoteException
NXException
RemoteException
void setThreadRotation(EndHoleData.ThreadRotationOptions threadRotation) throws NXException, RemoteException
threadRotation
- NXException
RemoteException
String fitOption() throws NXException, RemoteException
NXException
RemoteException
void setFitOption(String fitOption) throws NXException, RemoteException
fitOption
- NXException
RemoteException
String radialEngageOption() throws NXException, RemoteException
NXException
RemoteException
void setRadialEngageOption(String radialEngageOption) throws NXException, RemoteException
radialEngageOption
- NXException
RemoteException
Expression holeDiameter() throws NXException, RemoteException
NXException
RemoteException
EndHoleData.HoleDepthLimitOptions holeDepthLimitOption() throws NXException, RemoteException
NXException
RemoteException
void setHoleDepthLimitOption(EndHoleData.HoleDepthLimitOptions holeDepthLimitOption) throws NXException, RemoteException
holeDepthLimitOption
- NXException
RemoteException
SelectFace untilSelectedTarget() throws NXException, RemoteException
NXException
RemoteException
Expression holeDepth() throws NXException, RemoteException
NXException
RemoteException
Expression tipAngle() throws NXException, RemoteException
NXException
RemoteException
boolean threadedReliefEnabled() throws NXException, RemoteException
NXException
RemoteException
void setThreadedReliefEnabled(boolean threadedReliefEnabled) throws NXException, RemoteException
threadedReliefEnabled
- NXException
RemoteException
Expression threadedReliefDiameter() throws NXException, RemoteException
NXException
RemoteException
Expression threadedReliefDepth() throws NXException, RemoteException
NXException
RemoteException
Expression threadedReliefAngle() throws NXException, RemoteException
NXException
RemoteException
boolean reliefChamferEnabled() throws NXException, RemoteException
NXException
RemoteException
void setReliefChamferEnabled(boolean reliefChamferEnabled) throws NXException, RemoteException
reliefChamferEnabled
- NXException
RemoteException
Expression threadedReliefChamferOffset() throws NXException, RemoteException
NXException
RemoteException
Expression threadedReliefChamferAngle() throws NXException, RemoteException
NXException
RemoteException
boolean screwClearanceStartChamferEnabled() throws NXException, RemoteException
NXException
RemoteException
void setScrewClearanceStartChamferEnabled(boolean screwClearenceStartChamferEnabled) throws NXException, RemoteException
screwClearenceStartChamferEnabled
- NXException
RemoteException
Expression screwClearanceStartChamferOffset() throws NXException, RemoteException
NXException
RemoteException
Expression screwClearanceStartChamferAngle() throws NXException, RemoteException
NXException
RemoteException
boolean threadedStartChamferEnabled() throws NXException, RemoteException
NXException
RemoteException
void setThreadedStartChamferEnabled(boolean threadedStartChamferEnabled) throws NXException, RemoteException
threadedStartChamferEnabled
- NXException
RemoteException
Expression threadedStartChamferDiameter() throws NXException, RemoteException
NXException
RemoteException
Expression threadedStartChamferAngle() throws NXException, RemoteException
NXException
RemoteException
boolean screwClearanceEndChamferEnabled() throws NXException, RemoteException
NXException
RemoteException
void setScrewClearanceEndChamferEnabled(boolean screwClearanceEndChamferEnabled) throws NXException, RemoteException
screwClearanceEndChamferEnabled
- NXException
RemoteException
Expression screwClearanceEndChamferOffset() throws NXException, RemoteException
NXException
RemoteException
Expression screwClearanceEndChamferAngle() throws NXException, RemoteException
NXException
RemoteException
boolean threadedEndChamferEnabled() throws NXException, RemoteException
NXException
RemoteException
void setThreadedEndChamferEnabled(boolean threadedEndChamferEnabled) throws NXException, RemoteException
threadedEndChamferEnabled
- NXException
RemoteException
Expression threadedEndChamferDiameter() throws NXException, RemoteException
NXException
RemoteException
Expression threadedEndChamferAngle() throws NXException, RemoteException
NXException
RemoteException
BooleanOperation booleanOperation() throws NXException, RemoteException
NXException
RemoteException
Copyright 2011 Siemens Product Lifecycle Management Software Inc. All Rights Reserved.