Package | Description |
---|---|
nxopen |
Provides classes and interfaces for the NX Open Common API.
|
nxopen.annotations |
Provides classes and interfaces relating to Dimensions, Notes, Symbols, PMI, and other Annotations.
|
nxopen.assemblies |
Provides classes and interfaces for Assemblies.
|
nxopen.assemblies.productinterface |
Provides classes and interfaces for Assembly Product Interfaces.
|
nxopen.cae |
Provides classes and interfaces relating to Advanced Simulation and Design Simulation.
|
nxopen.cae.modelcheck |
Provides classes and interfaces for Model Check.
|
nxopen.cae.optimization |
Provides classes and interfaces relating to Optimization.
|
nxopen.cae.responsesimulation |
Provides classes and interfaces for Response Simulation.
|
nxopen.cam |
Provides classes and interfaces for Manufacturing.
|
nxopen.cam.fbm |
Provides classes and interfaces for Manufacturing.
|
nxopen.die |
Provides classes and interfaces relating to Die Engineering and Die Design.
|
nxopen.display |
Provides classes and interfaces for display.
|
nxopen.drafting |
Provides classes and interfaces for the Drafting.
|
nxopen.drawings |
Provides classes and interfaces for Drafting Drawings.
|
nxopen.facet |
Provides classes and interfaces for Faceted Representations.
|
nxopen.features |
Provides classes and interfaces for features.
|
nxopen.features.sheetmetal |
Provides classes and interfaces for Sheet Metal Features.
|
nxopen.features.shipdesign |
Provides classes and interfaces for Ship Design.
|
nxopen.features.subdivision |
Provides classes and interfaces for Manufacturing.
|
nxopen.features.vehicledesign |
Provides classes and interfaces for the Vehicle Design.
|
nxopen.fields |
Provides classes and interfaces for Fields.
|
nxopen.formboard |
Provides interfaces and classes to the Routing Electrical Formboard functionality.
|
nxopen.gateway |
Provides classes and interfaces for Gateway.
|
nxopen.geometricanalysis |
Provides classes and interfaces for Geometric Analysis.
|
nxopen.geometricanalysis.sectionanalysis |
Provides classes and interfaces for Section Analysis.
|
nxopen.geometricutilities |
Provides classes and interfaces for Geometric Utilities.
|
nxopen.issue |
Provides classes and interfaces for the Issue Management.
|
nxopen.layout2d |
Provides classes and interfaces for Manufacturing.
|
nxopen.markup | |
nxopen.mechatronics |
Provides classes and interfaces for Mechatronics.
|
nxopen.modldirect |
Provides classes and interfaces for Direct Modeling.
|
nxopen.motion |
Provides classes and interfaces for Motion Simulation.
|
nxopen.optimization |
Provides classes and interfaces for Optimization.
|
nxopen.pdm |
Provides classes and interfaces for PDM.
|
nxopen.physmat |
Provides classes and interfaces for Physical Material.
|
nxopen.preferences |
Provides classes and interfaces for preferences.
|
nxopen.routing |
Provides classes and interfaces for Routing.
|
nxopen.routing.electrical |
Provides classes and interfaces for Routing Electrical.
|
nxopen.shapesearch |
Provides classes and interfaces for Shape Search.
|
nxopen.sim |
Provides classes and interfaces for Machine Tool Builder and CAM-Simulation.
|
nxopen.tooling |
Provides classes and interfaces for Tooling.
|
nxopen.userdefinedtemplate |
Provides classes and interfaces for Manufacturing.
|
nxopen.validate |
Provides classes and interfaces for Validation Utilities.
|
nxopen.visualreporting |
Provides classes and interfaces for Visual Reporting.
|
nxopen.weld |
Provides classes and interfaces for Weld.
|
Modifier and Type | Interface and Description |
---|---|
interface |
ASCImporter
Represents a
ASCImporter . |
interface |
AttributePropertiesBaseBuilder
Represents an
AttributePropertiesBaseBuilder to be used for creating attributes. |
interface |
AttributePropertiesBuilder
Represents an
AttributePropertiesBuilder . |
interface |
AttributeTemplatesBuilder
Represents an
AttributeTemplatesBuilder to be used when creating attribute
templates. |
interface |
BasicEffectivityBuilder
Represent an interface class for basic effectivity block to assign or edit discrete effectivity unit values.
|
interface |
Builder
A Builder is an object that is used to create and edit other objects.
|
interface |
Catiav4Creator
Represents a
Catiav4Creator to be used when exporting the CATIA V4 Data
This class is created using DexManager . |
interface |
Catiav4Importer
Represents a
Catiav4Importer to be used when importing the CATIA V4 Data
This class is created using DexManager . |
interface |
Catiav5Creator
Represents a
Catiav5Creator to be used when exporting the CATIA V5 Data
This class is created using DexManager . |
interface |
Catiav5Importer
Represents a
Catiav5Importer to be used when importing the CATIA V5 Data
This class is created using DexManager . |
interface |
CGMBuilder
Represents a
CGMBuilder to be used when exporting the Current Display
or drawing sheets to a CGM. |
interface |
CGMImporter
Used to import a CGM file into the work part.
|
interface |
ConvertToFromReferenceBuilder
Represents a
ConvertToFromReferenceBuilder
To create a new instance of this class, use SketchCollection.createConvertToFromReferenceBuilder() Created in NX5.0.0 |
interface |
DateBuilder
The DateBuilder class allows a date and/or time to be input or output via the DateItem builder.
|
interface |
DateItemBuilder
This class stores a date and time.
|
interface |
DexBuilder
This is an abstract class that provides the basic functionality common to all dex builders.
|
interface |
DxfdwgCreator
Represents a
DxfdwgCreator to be used when exporting the DXF/DWG Data
This class is created using DexManager . |
interface |
DxfdwgImporter
Represents a
DxfdwgImporter to be used when importing the DXF/DWG Data
This class is created using DexManager . |
interface |
EffectivityConditionBuilder
Represent a utility class to assign or edit discrete and range effectivity unit values in the
context of a
CollaborativeDesign . |
interface |
EndCutBlockBuilder
Represents a End Cut Block Builder.
|
interface |
FeatureGeneralPropertiesBuilder
Represents a
FeatureGeneralPropertiesBuilder to be used for modifying
the names of features and general objects. |
interface |
FileNew
Represents a
FileNew
This class is not directly created. |
interface |
FourPointSurfaceBuilder
Represents a four point sheet body builder
To create a new instance of this class, use BodyCollection.createFourPointSurfaceBuilder() Created in NX6.0.0 |
interface |
HumanPosturePredictionBuilder
Represents a Human Posture Prediction Builder.
|
interface |
IgesCreator
Represents a
IgesCreator to be used when exporting the IGES Data
This class is created using DexManager . |
interface |
IgesImporter
Represents a
IgesImporter to be used when importing the IGES Data
This class is created using DexManager . |
interface |
Importer
Base class for importing data into the work part.
|
interface |
InferredConstraintsBuilder
Represents a
InferredConstraintsBuilder
To create a new instance of this class, use SketchCollection.createInferredConstraintsBuilder() Created in NX5.0.0 |
interface |
InterpartExpressionsBuilder
This class creates interpart expressions from the source part to the current work part via the naming rule defined.
|
interface |
JtCreator
Represents a
JtCreator to be used when exporting the JT Data
This class is created using PvtransManager . |
interface |
LineColorFontWidthBuilder
Represent a
LineColorFontWidthBuilder
This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0 |
interface |
LineFontBuilder
Represent a
LineFontBuilder
This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0 |
interface |
LineWidthBuilder
|
interface |
LinkedMirrorPartBuilder
builder class of LinkedMirrorPartBuilder
To create a new instance of this class, use PartCollection.createLinkedMirrorPartBuilder(nxopen.Part) Default values. |
interface |
ListCreator
Represents a
ListCreator to be used when exporting the JT Data
This class is created using PvtransManager . |
interface |
MassPropertiesBuilder
Represents a
MassPropertiesBuilder for calculating the weight of
selected objects as well as informing the part that the assemblies weight property
data needs to be updated on save. |
interface |
MeasureAngleBuilder
Represents a
MeasureAngleBuilder
To create a new instance of this class, use MeasureManager.createMeasureAngleBuilder(nxopen.NXObject) Created in NX5.0.0 |
interface |
MeasureBodyBuilder
Represents a
MeasureBodyBuilder
To create a new instance of this class, use MeasureManager.createMeasureBodyBuilder(nxopen.NXObject) Created in NX5.0.0 |
interface |
MeasureBuilder
Represents a
MeasureBuilder
This is an abstract class, and cannot be instantiated. |
interface |
MeasureDistanceBuilder
Represents a
MeasureDistanceBuilder
To create a new instance of this class, use MeasureManager.createMeasureDistanceBuilder(nxopen.NXObject) Created in NX5.0.0 |
interface |
MeasureFaceBuilder
Represents a
MeasureFaceBuilder
To create a new instance of this class, use MeasureManager.createMeasureFaceBuilder(nxopen.NXObject) Created in NX5.0.0 |
interface |
MovieSettingsBuilder
This class is the builder for the Movie Settings.
|
interface |
NXTo2dCreator
Represents a
NXTo2dCreator to be used when exporting the 2D Data
This class is created using DexManager . |
interface |
ObjectGeneralPropertiesBuilder
Represents an
ObjectGeneralPropertiesBuilder to be used for modifying
the names and properties of objects. |
interface |
ObjectSelector
Represents a
ObjectSelector to be used when exporting the the selected objects
from NX part.This class is created using DexManager . |
interface |
ObjectTypeSelector
Represents a
ObjectTypeSelector to be used when filter out the objects
based on the type during import/export. |
interface |
PartImporter
Used to import a part into the work part.
|
interface |
PasteSpecialBuilder
Represents a
PasteSpecialBuilder
To create a new instance of this class, use ClipboardOperationsManager.createPasteSpecialBuilder() Default values. |
interface |
PhysicalMaterialBuilder
Represents a
PhysicalMaterial builder To create a new instance of this class, use PhysicalMaterialCollection.createPhysicalMaterialBuilder(nxopen.PhysicalMaterial.Type) Created in NX6.0.0 |
interface |
PlotBuilder
Represents a
PlotBuilder . |
interface |
PreviewPropertiesBuilder
Represents a
PreviewPropertiesBuilder to be used for creating and storing
previews. |
interface |
PrintBuilder
Represents a
PrintBuilder . |
interface |
PrintPDFBuilder
Represents a
PrintPDFBuilder to be used when exporting the Current Display
or selected sheets to a PDF document. |
interface |
ProeImporter
Represents a
ProeImporter to be used when importing the ProE Data
This class is created using DexManager . |
interface |
ReplaceExpressionsBuilder
This class creates Replace expressions from the source part to the current work part via the naming rule defined.
|
interface |
SelectBody
Represents a single object selection.
|
interface |
SelectBodyList
Represents a list of objects on a selection list.
|
interface |
SelectCartesianCoordinateSystem
Represents a single object selection.
|
interface |
SelectCoordinateSystem
Represents a single object selection.
|
interface |
SelectCoordinateSystemList
Represents a list of objects on a selection list.
|
interface |
SelectCurve
Represents a single object selection.
|
interface |
SelectCurveList
Represents a list of objects on a selection list.
|
interface |
SelectDatumPlane
Represents a single object selection.
|
interface |
SelectDatumPlaneList
Represents a list of objects on a selection list.
|
interface |
SelectDisplayableObject
Represents a single object selection.
|
interface |
SelectDisplayableObjectList
Represents a list of objects on a selection list.
|
interface |
SelectEdge
Represents a single object selection.
|
interface |
SelectEdgeList
Represents a list of objects on a selection list.
|
interface |
SelectExpressionList
Represents a list of objects on a selection list.
|
interface |
SelectFace
Represents a single object selection.
|
interface |
SelectFaceList
Represents a list of objects on a selection list.
|
interface |
SelectIBaseCurve
Represents a single object selection.
|
interface |
SelectIBaseCurveList
Represents a list of objects on a selection list.
|
interface |
SelectIBasePlaneList
Represents a list of objects on a selection list.
|
interface |
SelectICurve
Represents a single object selection.
|
interface |
SelectICurveList
Represents a list of objects on a selection list.
|
interface |
SelectINXObjectList
Represents a list of objects on a selection list.
|
interface |
SelectIParameterizedSurface
Represents a single object selection.
|
interface |
SelectIParameterizedSurfaceList
Represents a list of objects on a selection list.
|
interface |
SelectISurface
Represents a single object selection.
|
interface |
SelectLine
Represents a single object selection.
|
interface |
SelectNXObject
Represents a single object selection.
|
interface |
SelectNXObjectList
Represents a list of objects on a selection list.
|
interface |
SelectObject
Represents a single object selection.
|
interface |
SelectObjectList
Represents a list of objects on a selection list.
|
interface |
SelectPart
Represents a single object selection.
|
interface |
SelectPartList
Represents a list of objects on a selection list.
|
interface |
SelectPlaneList
Represents a list of objects on a selection list.
|
interface |
SelectPoint
Represents a single object selection.
|
interface |
SelectPointList
Represents a list of objects on a selection list.
|
interface |
SelectSketch
Represents a single object selection.
|
interface |
SelectSmartObject
Represents a single object selection.
|
interface |
SelectSpline
Represents a single object selection.
|
interface |
SelectSplineList
Represents a list of objects on a selection list.
|
interface |
SelectTaggedObject
Represents a single object selection.
|
interface |
SelectTaggedObjectList
Represents a list of objects on a selection list.
|
interface |
SelectView
Represents a single object selection.
|
interface |
SketchAlongPathBuilder
Use the
SketchAlongPathBuilder to create or reattach a Sketch along a path. |
interface |
SketchAngularDimensionBuilder
Represents a
SketchAngularDimensionBuilder To create a new instance of this class, use SketchCollection.createAngularDimensionBuilder(nxopen.annotations.AngularDimension) Created in NX9.0.0 |
interface |
SketchAssociativeTrimBuilder
Represents a
SketchAssociativeTrimBuilder
To create a new instance of this class, use SketchCollection.createSketchAssociativeTrimBuilder(nxopen.SketchAssociativeTrim) Default values. |
interface |
SketchAutoConstrainBuilder
Represents a
SketchAutoConstrainBuilder
To create a new instance of this class, use SketchCollection.createAutoConstrainBuilder() Default values. |
interface |
SketchAutoDimensionBuilder
Represents a
SketchAutoDimensionBuilder
To create a new instance of this class, use SketchCollection.createAutoDimensionBuilder() Default values. |
interface |
SketchChamferBuilder
Represents a Chamfer builder
To create a new instance of this class, use SketchCollection.createSketchChamferBuilder() Default values. |
interface |
SketchConicBuilder
Represents a
SketchConicBuilder builder
To create a new instance of this class, use SketchCollection.createSketchConicBuilder(nxopen.NXObject) Default values. |
interface |
SketchConstraintBuilder
Represents a
SketchConstraint builder To create a new instance of this class, use SketchCollection.createConstraintBuilder() Created in NX8.5.0 |
interface |
SketchCornerBuilder
Create a corner between two sketch curves.
|
interface |
SketchDimensionBuilder
Edit the geometry references of an existing sketch dimension.
|
interface |
SketchEditDefiningSectionBuilder
Represents a
SketchEditDefiningSectionBuilder builder. |
interface |
SketchEllipseBuilder
Represents a
SketchEllipseBuilder builder
To create a new instance of this class, use SketchCollection.createSketchEllipseBuilder(nxopen.NXObject) Default values. |
interface |
SketchExpressionModifierBuilder
Represents a Sketch Expression Modifier Builder.
|
interface |
SketchInDraftingBuilder
Use the
SketchInDraftingBuilder to create a Sketch on a DraftingView or nxopen.drawings.DrawingSheet . |
interface |
SketchInPlaceBuilder
|
interface |
SketchLinearDimensionBuilder
Represents a
SketchLinearDimensionBuilder To create a new instance of this class, use SketchCollection.createLinearDimensionBuilder(nxopen.annotations.Dimension) Created in NX9.0.0 |
interface |
SketchMakeSymmetricBuilder
This class is used to add symmetric contraint to objects from a
SketchMakeSymmetricBuilder . |
interface |
SketchMirrorBuilder
This class is used to create a set of mirrored curves from a
SketchMirrorBuilder . |
interface |
SketchMirrorPatternBuilder
Represents a
SketchMirrorPatternBuilder
To create a new instance of this class, use SketchCollection.createSketchMirrorPatternBuilder(nxopen.SketchPattern) Default values. |
interface |
SketchOffsetBuilder
Represents a
SketchOffsetBuilder
To create a new instance of this class, use SketchCollection.createSketchOffsetBuilder(nxopen.SketchOffset) Default values. |
interface |
SketchPasteBuilder
Represents a
SketchPasteBuilder To create a new instance of this class, use SketchCollection.createSketchPasteBuilder(nxopen.Sketch[]) Default values. |
interface |
SketchPatternBuilder
Represents a
SketchPatternBuilder
To create a new instance of this class, use SketchCollection.createSketchPatternBuilder(nxopen.SketchPattern) Default values. |
interface |
SketchPolygonBuilder
Represents a
SketchPolygon builder To create a new instance of this class, use SketchCollection.createSketchPolygonBuilder(nxopen.SketchPolygon) Default values. |
interface |
SketchProjectBuilder
Represents a
SketchProjectBuilder builder
To create a new instance of this class, use SketchCollection.createProjectBuilder(nxopen.features.Feature) Default values. |
interface |
SketchQuickExtendBuilder
Represents a
SketchQuickExtendBuilder
To create a new instance of this class, use SketchCollection.createQuickExtendBuilder() Default values. |
interface |
SketchQuickTrimBuilder
Represents a
SketchQuickTrimBuilder
To create a new instance of this class, use SketchCollection.createQuickTrimBuilder() Default values. |
interface |
SketchRadialDimensionBuilder
Represents a
SketchRadialDimensionBuilder To create a new instance of this class, use SketchCollection.createRadialDimensionBuilder(nxopen.annotations.Dimension) Created in NX9.0.0 |
interface |
SketchRapidDimensionBuilder
Represents a
SketchRapidDimensionBuilder To create a new instance of this class, use SketchCollection.createRapidDimensionBuilder() Created in NX9.0.0 |
interface |
Step203Creator
Represents a
Step203Creator to be used when exporting the STEP203 Data
This class is created using DexManager . |
interface |
Step203Importer
Represents a
Step203Importer to be used when importing the STEP203 Data
This class is created using DexManager . |
interface |
Step214Creator
Represents a
Step214Creator to be used when exporting the STEP214 Data
This class is created using DexManager . |
interface |
Step214Importer
Represents a
Step214Importer to be used when importing the STEP214 Data
This class is created using DexManager . |
interface |
STLImporter
Used to import an STL file into the work part.
|
interface |
SuppressByExpressionBuilder
Represents a
SuppressByExpressionBuilder
To create a new instance of this class, use ExpressionCollection.createSuppressByExpressionBuilder() Default values. |
interface |
SurfaceUVDirectionBuilder
Represents an edit surface u/v direction builder that allows reversing or swapping parametric directions.
|
interface |
TableEditorDefaultDataProvider
Provides basic data for a Table Editor block.
|
interface |
TextColorFontWidthBuilder
Represent a
TextColorFontWidthBuilder
This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0 |
interface |
VRMLImporter
Used to import a VRML file into the work part.
|
Modifier and Type | Interface and Description |
---|---|
interface |
AddTicBuilder
Represents a
AddTicBuilder . |
interface |
AngularDimensionBuilder
Represents a
AngularDimension builder This is an abstract class and cannot be instantiated. |
interface |
AppendedTextBuilder
This class is used to set/access the appended text of a dimension
This is a sub-builder class and cannot be directly instantiated . |
interface |
AppendedTextEditorBuilder
Represents a
AppendedTextEditorBuilder builder To create a new instance of this class, use DimensionCollection.createAppendedTextEditorBuilder(nxopen.annotations.Dimension) Created in NX9.0.0 |
interface |
ArbitraryAreaSeedBuilder
Represents a
ArbitraryAreaSeedBuilder
To create a new instance of this class, use PmiManager.createArbitraryAreaSeedBuilder() Created in NX6.0.0 |
interface |
AssociateDimensionBuilder
Represents a
AssociateDimensionBuilder
To create a new instance of this class, use AnnotationManager.createAssociateDimensionBuilder(nxopen.annotations.Dimension) Created in NX5.0.0 |
interface |
AssociatedObjectsBuilder
The associated objects builder is used to store objects which annotations are associated to .
|
interface |
AssociatedObjectsSetsBuilder
The associated objects sets builder is used to store lists of objects which annotations are associated to .
|
interface |
AssociativityBuilder
Represents a
AssociativityBuilder
To create a new instance of this class, use AnnotationManager.createAssociativityBuilder(nxopen.annotations.Dimension, int) Created in NX5.0.0 |
interface |
AutomaticCenterlineBuilder
Builder for creating Automatic Centerlines
To create a new instance of this class, use CenterlineCollection.createAutomaticCenterlineBuilder() Default values. |
interface |
BalloonNoteBuilder
Represents a
BalloonNote builder To create a new instance of this class, use PmiAttributeCollection.createBalloonNoteBuilder(nxopen.annotations.BalloonNote) Created in NX6.0.0 |
interface |
BaseAngularDimensionBuilder
Represents a
AngularDimension builder This is an abstract class and cannot be instantiated. |
interface |
BaseCenterline3dBuilder
Represents a Base Centerline3d Builder for pmi and drafting 3D centerlines
This is an abstract class, and cannot be instantiated. |
interface |
BaseCenterMarkBuilder
Represents a Base CenterMark Builder for Pmi and Drafting centermark
This is an abstract class, and cannot be instantiated. |
interface |
BaseChamferDimensionBuilder
Represents a
BaseChamferDimension builder This is an abstract class and cannot be instantiated. |
interface |
BaseCurveLengthDimensionBuilder
Represents a
BaseArcLengthDimension builder This is an abstract class and cannot be instantiated. |
interface |
BaseCustomSymbolBuilder
Represents a base Builder for Drafting and PMI Custom Symbol
This is an abstract class, and cannot be instantiated. |
interface |
BaseFrameBarBuilder
Represents a
BaseFrameBarBuilder . |
interface |
BaseLinearDimensionBuilder
Represents a
Dimension builder This is an abstract class and cannot be instantiated. |
interface |
BaseOrdinateDimensionBuilder
Represents a
OrdinateDimension builder This is an abstract class and cannot be instantiated. |
interface |
BaseRadialDimensionBuilder
Represents a
Dimension builder This is an abstract class and cannot be instantiated. |
interface |
BaseRapidDimensionBuilder
Represents a
Dimension builder This is an abstract class and cannot be instantiated. |
interface |
BaseSurfaceFinishBuilder
Represents a
BaseSurfaceFinish builder This is an abstract class, and cannot be instantiated. |
interface |
BaseSymbolBuilder
Represents a Base Symbol Builder
This is an abstract class, and cannot be instantiated. |
interface |
BaseThicknessDimensionBuilder
Represents a
BaseThicknessDimensionBuilder builder This is an abstract class and cannot be instantiated. |
interface |
BaseTitleBlockBuilder
Represents a
BaseTitleBlockBuilder builder. |
interface |
BillOfMaterialBuilder
Builder for Bill of Material functionality used in Routing.
|
interface |
BoltCircleCenterlineBuilder
Represents a BoltCircleCenterlineBuilder Builder
To create a new instance of this class, use CenterlineCollection.createBoltCircleCenterlineBuilder(nxopen.annotations.BoltCircleCenterline) Default values. |
interface |
BoundaryBuilder
This builder contains the boundaries that define a crosshatch pattern .
|
interface |
BreakSettingsBuilder
|
interface |
Centerline2dBuilder
Builder for creating 2D Centerline.
|
interface |
Centerline2dSettingsBuilder
Represents a Builder for Centerline2dSettings.
|
interface |
Centerline3dBuilder
Builder for creating 3D Centerline.
|
interface |
Centerline3dSettingsBuilder
Represents a Builder for Centerline3dSettings.
|
interface |
CenterlineBuilder
Represents a Base Centerline Builder for all types of centerlines
This is an abstract class, and cannot be instantiated. |
interface |
CenterlineSettingsBuilder
Represents a Builder for Centerline Settings.
|
interface |
CenterMarkBuilder
Builder for creating Center Mark.
|
interface |
CenterMarkSettingsBuilder
Represents a Builder for CenterMark Settings.
|
interface |
ChamferDimensionBuilder
Represents a
ChamferDimension builder To create a new instance of this class, use DimensionCollection.createChamferDimensionBuilder(nxopen.annotations.BaseChamferDimension) Created in NX9.0.0 |
interface |
CircleCenterlineBuilder
Represents a CircleCenterline Builder
This is an abstract class. |
interface |
CircleCenterlineSettingsBuilder
Represents a Builder for Circle Centerline Settings .
|
interface |
CircularCenterlineBuilder
Represents a CircularCenterlineBuilder Builder
To create a new instance of this class, use CenterlineCollection.createCircularCenterlineBuilder(nxopen.annotations.CircularCenterline) Default values. |
interface |
CommonWorkflowBuilder
|
interface |
CompanyProprietaryInformationBuilder
Represents a
CompanyProprietaryInformation builder To create a new instance of this class, use PmiAttributeCollection.createCompanyProprietaryInformationBuilder(nxopen.annotations.CompanyProprietaryInformation) Created in NX6.0.0 |
interface |
CompoundDatumReferenceBuilder
Represents a
CompoundDatumReferenceBuilder
To create a new instance of this class, use AnnotationManager.createCompoundDatumReferenceBuilder() Created in NX6.0.0 |
interface |
CoordinateNoteBuilder
Represents a
CoordinateNote builder To create a new instance of this class, use PmiAttributeCollection.createCoordinateNoteBuilder(nxopen.annotations.CoordinateNote) Default values. |
interface |
CurveLengthDimensionBuilder
Represents a
ArcLengthDimension builder To create a new instance of this class, use DimensionCollection.createCurveLengthDimensionBuilder(nxopen.annotations.BaseArcLengthDimension) Created in NX9.0.0 |
interface |
CustomerValueBusinessModifierBuilder
Represents a
CustomerValueBusinessModifier builder To create a new instance of this class, use BusinessModifierCollection.createCustomerValueBusinessModifierBuilder(nxopen.annotations.CustomerValueBusinessModifier) Created in NX6.0.0 |
interface |
CustomSymbolLeaderBuilder
This class is responsible for defining the origin and leader for custom
symbol objects.
|
interface |
CuttingPlaneSymbolBuilder
Represents a
CuttingPlaneSymbolBuilder
This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0 |
interface |
DatumFeatureSymbolBuilder
Represents a Base Datum Feature Symbol Builder for all types of datum feature symbols
This is an abstract class, and cannot be instantiated. |
interface |
DatumReferenceBuilder
Represents a
DatumReferenceBuilder
To create a new instance of this class, use AnnotationManager.createEmptyDatumReferenceBuilder() Created in NX6.0.0 |
interface |
DatumTargetBuilder
Represents a Datum target Builder
This is an abstract class, and cannot be instantiated. |
interface |
DefineTitleBlockBuilder
Represents a
DefineTitleBlockBuilder . |
interface |
DimensionMeasurementBuilder
Represents a
DimensionMeasurementBuilder
This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0 |
interface |
DimensionSetBuilder
Represents a
DimensionSetBuilder
This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0 |
interface |
DimensionStyleBuilder
Represents a
DimensionStyleBuilder . |
interface |
DimensionWorkflowBuilder
Represents a Annotations WorkFlowBuilder.
|
interface |
DraftingCustomSymbolBuilder
Represents builder for Drafting Custom Symbol
To create a new instance of this class, use CustomSymbolCollection.createDraftingCustomSymbolBuilder(nxopen.annotations.CustomSymbol) Created in NX7.5.0 |
interface |
DraftingDatumFeatureSymbolBuilder
datum feature symbol builder
To create a new instance of this class, use GdtDatumCollection.createDraftingDatumFeatureSymbolBuilder(nxopen.annotations.DraftingDatum) Created in NX6.0.0 |
interface |
DraftingDatumTargetBuilder
Represents a
DraftingDatumTargetBuilder
To create a new instance of this class, use AnnotationManager.createDraftingDatumTargetBuilder(nxopen.annotations.DraftingDatumTarget) Default values. |
interface |
DraftingFeatureControlFrameBuilder
Represents a
DraftingFeatureControlFrameBuilder
To create a new instance of this class, use AnnotationManager.createDraftingFeatureControlFrameBuilder(nxopen.annotations.Gdt) Default values. |
interface |
DraftingNoteBuilder
Represents a
Note builder To create a new instance of this class, use AnnotationManager.createDraftingNoteBuilder(nxopen.annotations.SimpleDraftingAid) Default values. |
interface |
DraftingSurfaceFinishBuilder
Represents a
DraftingSurfaceFinish builder To create a new instance of this class, use DraftingSurfaceFinishCollection.createDraftingSurfaceFinishBuilder(nxopen.annotations.DraftingSurfaceFinish) Created in NX7.5.0 |
interface |
DrawingFormatTitleBuilder
|
interface |
DrivingValueBuilder
.
|
interface |
EditLeaderBuilder
Represents a builder that provides an interface to adding and editing leaders
to table entities
To create a new instance of this class, use AnnotationManager.createEditLeaderBuilder(nxopen.DisplayableObject) Created in NX6.0.1 |
interface |
EditSettingsBuilder
the edit settings builder
To create a new instance of this class, use SettingsManager.createAnnotationEditSettingsBuilder(nxopen.DisplayableObject[]) Created in NX9.0.0 |
interface |
EditSymbolDisplayBuilder
Represents a EditSymbolPieces builder
To create a new instance of this class, use CustomSymbolCollection.editSymbolDisplayBuilder(nxopen.annotations.BaseCustomSymbol) Default values. |
interface |
EditTitleBlockBuilder
Represents a
EditTitleBlockBuilder builder To create a new instance of this class, use TitleBlockCollection.createEditTitleBlockBuilder(nxopen.annotations.TitleBlock[]) Created in NX8.0.0 |
interface |
EnterpriseIdentificationBuilder
Represents a
EnterpriseIdentification builder To create a new instance of this class, use PmiAttributeCollection.createEnterpriseIdentificationBuilder(nxopen.annotations.EnterpriseIdentification) Created in NX6.0.0 |
interface |
ExportControlBuilder
Represents a
ExportControl builder To create a new instance of this class, use PmiAttributeCollection.createExportControlBuilder(nxopen.annotations.ExportControl) Created in NX6.0.0 |
interface |
FeatureControlFrameBuilder
Represents a
FeatureControlFrameBuilder
This is an abstract class, and cannot be instantiated. |
interface |
FeatureControlFrameDataBuilder
Represents a FeatureControlFrameDataBuilder
.
|
interface |
FeatureIdBusinessModifierBuilder
Represents a
FeatureIdBusinessModifier builder To create a new instance of this class, use BusinessModifierCollection.createFeatureIdBusinessModifierBuilder(nxopen.annotations.FeatureIdBusinessModifier) Created in NX6.0.0 |
interface |
ForeshorteningSymbolBuilder
Represents a
ForeshorteningSymbolBuilder builder There is no KF creator for this class. |
interface |
ForeshorteningSymbolSettingsBuilder
|
interface |
FrameBarBuilder
Represents a
FrameBarBuilder . |
interface |
FrameBarElementStyleBuilder
Represents a
FrameBarElementStyleBuilder . |
interface |
FrameBarStyleBuilder
Represents a
FrameBarStyleBuilder . |
interface |
GeneralNoteBuilder
Represents a
GeneralNote builder To create a new instance of this class, use PmiAttributeCollection.createGeneralNoteBuilder(nxopen.annotations.GeneralNote) Created in NX6.0.0 |
interface |
GeodesicDimensionBuilder
Represents a
Annotations.Dimension builder To create a new instance of this class, use DimensionCollection.createGeodesicDimensionBuilder(nxopen.annotations.Dimension) Created in NX10.0.0 |
interface |
GovernmentSecurityInformationBuilder
Represents a
GovernmentSecurityInformation builder To create a new instance of this class, use PmiAttributeCollection.createGovernmentSecurityInformationBuilder(nxopen.annotations.GovernmentSecurityInformation) Created in NX6.0.0 |
interface |
HatchBuilder
This class is used to construct the crosshatching that lies within a boundary.
|
interface |
HatchFillSettingsBuilder
This class is used to construct the Crosshatch and area Fill setting block .
|
interface |
HatchStyleBuilder
Represents a
HatchStyleBuilder . |
interface |
HoleCalloutSettingsBuilder
Represents a
HoleCalloutSettingsBuilder , this builder contains list(s) of parameter(s) for feature(s). |
interface |
HoleTableSettingsContentBuilder
|
interface |
HoleTableSettingsFormatBuilder
|
interface |
HoleTableSettingsHoleFiltersBuilder
|
interface |
HoleTableSettingsLabelBuilder
|
interface |
HoleTableSettingsWorkflowBuilder
|
interface |
IdSymbolBuilder
Represents a
IdSymbol builder To create a new instance of this class, use IdSymbolCollection.createIdSymbolBuilder(nxopen.annotations.IdSymbol) Default values. |
interface |
ImportAutocadBlockBuilder
Represents a builder allowing import of AutoCAD blocks.
|
interface |
ImportSymbolBuilder
Represents a builder allowing import of one or many foreign symbols.
|
interface |
IntersectionSymbolBuilder
Represents a
IntersectionSymbol builder To create a new instance of this class, use IntersectionSymbolCollection.createIntersectionSymbolBuilder(nxopen.annotations.IntersectionSymbol) Default values. |
interface |
LeaderBuilder
Represents a
LeaderBuilder . |
interface |
LeaderData
Represents a
LeaderData . |
interface |
LetteringStyleBuilder
Represents a
LetteringStyleBuilder . |
interface |
LightweightSectionBuilder
Represents a
LightweightSection builder To create a new instance of this class, use PmiLightweightSectionCollection.createLightweightSectionBuilder(nxopen.annotations.LightweightSection) Default values. |
interface |
LinearDimensionBuilder
Represents a
Annotations.Dimension builder To create a new instance of this class, use DimensionCollection.createLinearDimensionBuilder(nxopen.annotations.Dimension) Created in NX9.0.0 |
interface |
LineArrowStyleBuilder
Represents a
LineArrowStyleBuilder . |
interface |
LineWeldBuilder
Represents a
LineWeldBuilder To create a new instance of this class, use WeldCollection.createLineWeldBuilder(nxopen.annotations.LineWeld) Default values. |
interface |
LineWeldDataBuilder
|
interface |
LocatorDesignatorBuilder
Represents a
LocatorDesignator builder To create a new instance of this class, use PmiAttributeCollection.createLocatorDesignatorBuilder(nxopen.annotations.LocatorDesignator) Created in NX6.0.0 |
interface |
MajorAngularDimensionBuilder
Represents a
AngularDimension builder To create a new instance of this class, use DimensionCollection.createMajorAngularDimensionBuilder(nxopen.annotations.MajorAngularDimension) Created in NX9.0.0 |
interface |
MasterSymbolBuilder
Represents a Builder for MasterSymbol functionality
To create a new instance of this class, use CustomSymbolCollection.createMasterSymbolBuilder(nxopen.annotations.MasterSymbol) Default values. |
interface |
MasterSymbolListItemBuilder
Represents a
MasterSymbolListItemBuilder
To create a new instance of this class, use CustomSymbolCollection.createMasterSymbolListItemBuilder() Created in NX7.5.0 |
interface |
MaterialSpecificationBuilder
Represents a
MaterialSpecification builder To create a new instance of this class, use PmiAttributeCollection.createMaterialSpecificationBuilder(nxopen.annotations.MaterialSpecification) Created in NX6.0.0 |
interface |
MinorAngularDimensionBuilder
Represents a
Annotations.AngularDimension builder To create a new instance of this class, use DimensionCollection.createMinorAngularDimensionBuilder(nxopen.annotations.MinorAngularDimension) Created in NX9.0.0 |
interface |
OffsetCenterPointBuilder
Represents a
OffsetCenterPoint builder To create a new instance of this class, use OffsetCenterPointCollection.createOffsetCenterPointBuilder(nxopen.annotations.OffsetCenterPoint) Default values. |
interface |
OrdinateBaselineBuilder
Represents a builder for an ordinate baseline
This is a sub-builder class and cannot be directly instantiated . |
interface |
OrdinateDimensionBuilder
Represents a
OrdinateDimension builder To create a new instance of this class, use DimensionCollection.createOrdinateDimensionBuilder(nxopen.annotations.OrdinateDimension) Created in NX9.0.0 |
interface |
OrdinateStyleBuilder
Represents a
OrdinateStyleBuilder . |
interface |
OriginBuilder
Represents a
OriginBuilder
This is a sub-builder class and cannot be directly instantiated Created in NX6.0.0 |
interface |
PartIdentificationBuilder
Represents a
PartIdentification builder To create a new instance of this class, use PmiAttributeCollection.createPartIdentificationBuilder(nxopen.annotations.PartIdentification) Created in NX6.0.0 |
interface |
PartsListBuilder
Represents a
PartsListBuilder . |
interface |
PartSymbolFolderBuilder
Represents a
PartSymbolFolderBuilder . |
interface |
PinListBuilder
Builder for Formboard pin list functionality used in formboard.
|
interface |
PlaneBuilder
Represents a
PlaneBuilder object. |
interface |
PmiAngularDimensionBuilder
Represents a
Annotations.AngularDimension builder This is an abstract class and cannot be instantiated. |
interface |
PmiAttributeBuilder
Represents a
PmiAttribute builder To create a new instance of this class, use PmiAttributeCollection.createPmiAttributeBuilder(nxopen.annotations.PmiAttribute) Created in NX6.0.0 |
interface |
PmiAttributeValueIntegerBuilder
Represents a
PmiAttributeValueInteger builder To create a new instance of this class, use PmiAttributeCollection.createPmiAttributeValueIntegerBuilder(nxopen.annotations.PmiAttributeValueInteger) Created in NX6.0.0 |
interface |
PmiAttributeValueListBuilder
Represents a
PmiAttributeValueList builder To create a new instance of this class, use PmiAttributeCollection.createPmiAttributeValueListBuilder(nxopen.annotations.PmiAttributeValueList) Created in NX6.0.0 |
interface |
PmiAttributeValueNumberBuilder
Represents a
PmiAttributeValueNumber builder To create a new instance of this class, use PmiAttributeCollection.createPmiAttributeValueNumberBuilder(nxopen.annotations.PmiAttributeValueNumber) Created in NX6.0.0 |
interface |
PmiAttributeValueUrlBuilder
Represents a
PmiAttributeValueUrl builder To create a new instance of this class, use PmiAttributeCollection.createPmiAttributeValueUrlBuilder(nxopen.annotations.PmiAttributeValueUrl) Created in NX6.0.0 |
interface |
PmiCenterline3dBuilder
Builder for creating Pmi 3D Centerline.
|
interface |
PmiCenterMarkBuilder
Builder for creating PMI Center Mark.
|
interface |
PmiChamferDimensionBuilder
Represents a
PmiChamferDimension builder To create a new instance of this class, use DimensionCollection.createPmiChamferDimensionBuilder(nxopen.annotations.PmiChamferDimension) Created in NX9.0.0 |
interface |
PmiCurveLengthDimensionBuilder
Represents a
PmiArcLengthDimension builder To create a new instance of this class, use DimensionCollection.createPmiCurveLengthDimensionBuilder(nxopen.annotations.PmiArcLengthDimension) Created in NX9.0.0 |
interface |
PmiCustomSymbolBuilder
Represents builder for PMI Custom Symbol
To create a new instance of this class, use CustomSymbolCollection.createPmiCustomSymbolBuilder(nxopen.annotations.PmiCustomSymbol) Created in NX7.5.0 |
interface |
PmiDatumFeatureSymbolBuilder
datum feature symbol builder
To create a new instance of this class, use GdtDatumCollection.createPmiDatumFeatureSymbolBuilder(nxopen.annotations.Datum) Created in NX6.0.0 |
interface |
PmiDatumTargetBuilder
Represents a
PmiDatumTargetBuilder
To create a new instance of this class, use AnnotationManager.createPmiDatumTargetBuilder(nxopen.annotations.DatumTarget) Default values. |
interface |
PMIExplicitOrderBuilder
This is the
PMIExplicitOrderBuilder for the explicit order To create a new instance of this class, use PmiManager.createExplicitOrderBuilder() Created in NX9.0.0 |
interface |
PmiFeatureControlFrameBuilder
Represents a
PmiFeatureControlFrameBuilder
To create a new instance of this class, use AnnotationManager.createPmiFeatureControlFrameBuilder(nxopen.annotations.Fcf) Created in NX6.0.0 |
interface |
PmiIntegerBuilder
Represents a
PmiInteger builder To create a new instance of this class, use PmiAttributeCollection.createPmiIntegerBuilder(nxopen.annotations.PmiInteger) Default values. |
interface |
PmiLinearDimensionBuilder
Represents a
Annotations.Dimension builder To create a new instance of this class, use DimensionCollection.createPmiLinearDimensionBuilder(nxopen.annotations.Dimension) Created in NX9.0.0 |
interface |
PmiLineWeldBuilder
Represents a
PmiLineWeld builder To create a new instance of this class, use WeldCollection.createPmiLineWeldBuilder(nxopen.annotations.PmiLineWeld) Default values. |
interface |
PmiMajorAngularDimensionBuilder
Represents a
Annotations.AngularDimension builder To create a new instance of this class, use DimensionCollection.createPmiMajorAngularDimensionBuilder(nxopen.annotations.BaseAngularDimension) Created in NX9.0.0 |
interface |
PmiMinorAngularDimensionBuilder
Represents a
Annotations.AngularDimension builder To create a new instance of this class, use DimensionCollection.createPmiMinorAngularDimensionBuilder(nxopen.annotations.BaseAngularDimension) Created in NX9.0.0 |
interface |
PmiNoteBuilder
Represents a
Note builder To create a new instance of this class, use AnnotationManager.createPmiNoteBuilder(nxopen.annotations.SimpleDraftingAid) Created in NX6.0.0 |
interface |
PmiNumberBuilder
Represents a
PmiNumber builder To create a new instance of this class, use PmiAttributeCollection.createPmiNumberBuilder(nxopen.annotations.PmiNumber) Default values. |
interface |
PmiOrdinateDimensionBuilder
Represents a
Annotations.OrdinateDimension builder To create a new instance of this class, use DimensionCollection.createPmiOrdinateDimensionBuilder(nxopen.annotations.OrdinateDimension) Created in NX9.0.0 |
interface |
PmiRadialDimensionBuilder
Represents a
Annotations.Dimension builder To create a new instance of this class, use DimensionCollection.createPmiRadialDimensionBuilder(nxopen.annotations.Dimension) Created in NX9.0.0 |
interface |
PmiRapidDimensionBuilder
Represents a
Annotations.Dimension builder To create a new instance of this class, use DimensionCollection.createPmiRapidDimensionBuilder(nxopen.annotations.Dimension) Created in NX9.0.0 |
interface |
PmiThicknessDimensionBuilder
Represents a
PmiConcentricCircleDimension builder To create a new instance of this class, use DimensionCollection.createPmiThicknessDimensionBuilder(nxopen.annotations.PmiConcentricCircleDimension) Created in NX9.0.0 |
interface |
PmiTrackingPropertiesBuilder
Represents a
Annotations.AngularDimension builder To create a new instance of this class, use AnnotationManager.createPmiTrackingPropertiesBuilder() Created in NX10.0.0 |
interface |
PmiUrlNoteBuilder
Represents a
PmiUrlNote builder To create a new instance of this class, use PmiAttributeCollection.createPmiUrlNoteBuilder(nxopen.annotations.PmiUrlNote) Created in NX6.0.0 |
interface |
PmiUserDefinedBuilder
Represents a
PmiUserDefined builder To create a new instance of this class, use PmiAttributeCollection.createPmiUserDefinedBuilder(nxopen.annotations.PmiUserDefined) Created in NX6.0.0 |
interface |
PmiWaveLinkBuilder
Represents a
Pmi builder To create a new instance of this class, use PmiWaveCollection.createPmiWaveLinkBuilder(Annotation) Created in NX8.0.0 |
interface |
ProcessSpecificationBuilder
Represents a
ProcessSpecification builder To create a new instance of this class, use PmiAttributeCollection.createProcessSpecificationBuilder(nxopen.annotations.ProcessSpecification) Created in NX6.0.0 |
interface |
QueryPmiBuilder
Represents a
QueryPmiBuilder
To create a new instance of this class, use AnnotationManager.createQueryPmiBuilder() Default values. |
interface |
RadialDimensionBuilder
Represents a
Annotations.Dimension builder To create a new instance of this class, use DimensionCollection.createRadialDimensionBuilder(nxopen.annotations.Dimension) Created in NX9.0.0 |
interface |
RadialStyleBuilder
Represents a
RadialStyleBuilder . |
interface |
RapidDimensionBuilder
Represents a
Annotations.Dimension builder To create a new instance of this class, use DimensionCollection.createRapidDimensionBuilder(nxopen.annotations.Dimension) Created in NX9.0.0 |
interface |
RegionBuilder
Represents a
RegionBuilder builder To create a new instance of this class, use PmiRegionCollection.createRegionBuilder(nxopen.annotations.Region) Default values. |
interface |
ReplaceSymbolBuilder
Represents a Builder for Replace Custom Symbol functionality
To create a new instance of this class, use CustomSymbolCollection.createReplaceSymbolBuilder() Default values. |
interface |
RetainedAnnotationsBuilder
|
interface |
RevisionBusinessModifierBuilder
Represents a
RevisionBusinessModifier builder To create a new instance of this class, use BusinessModifierCollection.createRevisionBusinessModifierBuilder(nxopen.annotations.RevisionBusinessModifier) Created in NX6.0.0 |
interface |
SafetyClassBusinessModifierBuilder
Represents a
SafetyClassBusinessModifier builder To create a new instance of this class, use BusinessModifierCollection.createSafetyClassBusinessModifierBuilder(nxopen.annotations.SafetyClassBusinessModifier) Created in NX6.0.0 |
interface |
SearchCriteriaCalloutBuilder
Represents SearchCriteriaCalloutBuilder
This is a sub-builder class and cannot be directly instantiated . |
interface |
SearchCriteriaDatumFeatureSymbolBuilder
Represents SearchCriteriaDatumFeatureSymbolBuilder
To create a new instance of this class, use SearchModelViewCollection.createSearchCriteriaDatumFeatureSymbolBuilder(nxopen.NXObject) Created in NX7.5.0 |
interface |
SearchCriteriaDatumTargetBuilder
Represents SearchCriteriaDatumTargetBuilder
To create a new instance of this class, use SearchModelViewCollection.createSearchCriteriaDatumTargetBuilder(nxopen.NXObject) Created in NX7.5.0 |
interface |
SearchCriteriaDimensionBuilder
Represents SearchCriteriaDimensionBuilder
To create a new instance of this class, use SearchModelViewCollection.createSearchCriteriaDimensionBuilder(nxopen.NXObject) Created in NX7.5.0 |
interface |
SearchCriteriaFeatureControlFrameBuilder
Represents SearchCriteriaFeatureControlFrameBuilder
To create a new instance of this class, use SearchModelViewCollection.createSearchCriteriaFeatureControlFrameBuilder(nxopen.NXObject) Created in NX7.5.0 |
interface |
SearchCriteriaPMINotesBuilder
Represents SearchCriteriaPMINotesBuilder
To create a new instance of this class, use SearchModelViewCollection.createSearchCriteriaPminotesBuilder(nxopen.NXObject) Created in NX7.5.0 |
interface |
SearchCriteriaSurfaceFinishBuilder
Represents SearchCriteriaSurfaceFinishBuilder
To create a new instance of this class, use SearchModelViewCollection.createSearchCriteriaSurfaceFinishBuilder(nxopen.NXObject) Created in NX7.5.0 |
interface |
SearchModelViewBuilder
Represents a
SearchModelViewBuilder
To create a new instance of this class, use SearchModelViewCollection.createSearchModelViewBuilder(nxopen.ModelingView) Default values. |
interface |
SelectAnnotationList
Represents a list of objects on a selection list.
|
interface |
SelectBaseCustomSymbolList
Represents a list of objects on a selection list.
|
interface |
SelectDimension
Represents a single object selection.
|
interface |
SelectOrdinateDimensionList
Represents a list of objects on a selection list.
|
interface |
SelectTableSectionList
Represents a list of objects on a selection list.
|
interface |
ShipDimensionBuilder
Represents a
Annotations.Dimension builder To create a new instance of this class, use ShipDimensionCollection.createShipDimensionBuilder(nxopen.annotations.Dimension) Created in NX9.0.0 |
interface |
ShipDraftingFramebarGeneralBuilder
Represents a
ShipDraftingFramebarGeneralBuilder
This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0 |
interface |
SingleSidedDisplayBuilder
Represents a
SingleSidedDisplayBuilder . |
interface |
SmashCustomSymbolBuilder
Represents a
SmashCustomSymbolBuilder . |
interface |
SpecificNoteBuilder
Represents a
SpecificNote builder To create a new instance of this class, use PmiAttributeCollection.createSpecificNoteBuilder(nxopen.annotations.SpecificNote) Created in NX6.0.0 |
interface |
StyleBuilder
Represents a
StyleBuilder . |
interface |
SurfaceFinishBuilder
Represents a
SurfaceFinish builder To create a new instance of this class, use PmiAttributeCollection.createSurfaceFinishBuilder(nxopen.annotations.SurfaceFinish) Created in NX6.0.0 |
interface |
SymbolCatalogBuilder
Represents a builder to instantiate a symbol from a parameterized family of standard
symbols defined in catalogs, eg. for standard fasteners.
|
interface |
SymbolCatalogParameterBuilder
This builder allows you to define one parameter for a symbol
To create a new instance of this class, use SymbolCatalogBuilder.newParameter() Created in NX8.0.0 |
interface |
SymbolFileBuilder
Represents builder for drafting Symbol file builder
To create a new instance of this class, use SymbolFileCollection.createSymbolFileBuilder(nxopen.annotations.SymbolFile) Created in NX8.0.0 |
interface |
SymbolStyleBuilder
Represents a
SymbolStyleBuilder . |
interface |
SymbolWorkflowBuilder
|
interface |
SymmetricalCenterlineBuilder
Builder for creating Symmetrical Centerline.
|
interface |
SymmetricalCenterlineSettingsBuilder
Represents a Builder for Symmetrical Centerline Settings .
|
interface |
TableCellStyleBuilder
Represents a
TableCellStyleBuilder . |
interface |
TableEditSettingsBuilder
Represents a
TableEditSettingsBuilder . |
interface |
TableSectionBuilder
Represents a
TableSection builder To create a new instance of this class, use TableSectionCollection.createTableSectionBuilder(nxopen.annotations.TableSection) Default values. |
interface |
TableSectionStyleBuilder
Represents a
TableSectionStyleBuilder . |
interface |
TableStyleBuilder
Represents a
TableStyleBuilder . |
interface |
TabularNoteStyleBuilder
Represents a
TabularNoteStyleBuilder . |
interface |
TargetPointBuilder
Represents a
TargetPoint builder To create a new instance of this class, use TargetPointCollection.createTargetPointBuilder(nxopen.annotations.TargetPoint) Default values. |
interface |
TextWithEditControlsBuilder
Represents a
TextWithEditControlsBuilder which collects
internationalized text strings from the user for processing on an annotation object. |
interface |
TextWithSymbolsBuilder
Represents a
TextWithSymbolsBuilder which collects
internationalized text strings from the user for processing on an annotation object. |
interface |
ThicknessDimensionBuilder
Represents a
ConcentricCircleDimension builder To create a new instance of this class, use DimensionCollection.createThicknessDimensionBuilder(nxopen.annotations.BaseConcentricCircleDimension) Created in NX9.0.0 |
interface |
UnitsStyleBuilder
Represents a
UnitsStyleBuilder . |
interface |
UrlBusinessModifierBuilder
Represents a
UrlBusinessModifier builder To create a new instance of this class, use BusinessModifierCollection.createUrlBusinessModifierBuilder(nxopen.annotations.UrlBusinessModifier) Created in NX6.0.0 |
Modifier and Type | Interface and Description |
---|---|
interface |
AbsolutePositionBuilder
Represents a builder class that absolutely positions the specified objects.
|
interface |
ArrangementsBuilder
Represents an arrangements builder that selects an arrangement
.
|
interface |
AssembliesGeneralPropertiesBuilder
Represents an
AssembliesGeneralPropertiesBuilder to be used for changing the
general properties of a component. |
interface |
AssembliesParameterPropertiesBuilder
Represents an
AssembliesParameterPropertiesBuilder to be used for changing the
name or modifying the positioning mixture status of a component. |
interface |
AttributeSearchTermBuilder
An AttributeSearchTermBuilder is used to create or edit an
AttributeSearchTerm . |
interface |
BoxSearchTermBuilder
A BoxSearchTermBuilder is used to create or edit an
BoxSearchTerm . |
interface |
ClearanceAnalysisBuilder
Represents
ClearanceAnalysisBuilder . |
interface |
ComponentPatternBuilder
Represents a builder class that performs various
ComponentPattern operations. |
interface |
ConstraintDisplayBuilder
The
ConstraintDisplayBuilder can be used to control visibility
of constraints and optionally components. |
interface |
CreateNewComponentBuilder
Represents a
CreateNewComponentBuilder builder class To create a new instance of this class, use AssemblyManager.createNewComponentBuilder() Default values. |
interface |
CreateOverridePartBuilder
Represents a builder class that creates empty override part in the specified design elements.
|
interface |
DeleteOverridePartBuilder
Represents a builder class that deletes override part in the specified design elements.
|
interface |
DesignElementBuilder
Represents a builder class that performs various design element operations.
|
interface |
HideComponentBuilder
Represents a
HideComponentBuilder To create a new instance of this class, use AssemblyManager.createHideComponentBuilder() Created in NX6.0.0 |
interface |
LoadInterpartDataBuilder
Represents a builder
LoadInterpartDataBuilder To create a new instance of this class, use AssemblyManager.createLoadInterpartDataBuilder() Default values. |
interface |
MakeUniquePartBuilder
Represents a
MakeUniquePartBuilder builder To create a new instance of this class, use AssemblyManager.createMakeUniquePartBuilder() Default values. |
interface |
PlaneSearchTermBuilder
A PlaneSearchTermBuilder is used to create or edit an
PlaneSearchTerm . |
interface |
PositioningTaskBuilder
Represents the class for positioning task builder
To create a new instance of this class, use SubsetCollection.createPositioningTaskBuilder(nxopen.assemblies.PositioningTask) Created in NX10.0.0 |
interface |
ProductOutlineBuilder
Represents a builder
ProductOutlineBuilder . |
interface |
ProximitySearchTermBuilder
A ProximitySearchTermBuilder is used to create or edit an
Assemblies.BoxSearchTerm . |
interface |
RelinkerBuilder
Represents a
RelinkerBuilder
To create a new instance of this class, use RelinkerCollection.createBuilder() Created in NX5.0.0 |
interface |
ReplaceComponentBuilder
Represents a
ReplaceComponentBuilder builder To create a new instance of this class, use AssemblyManager.createReplaceComponentBuilder() Default values. |
interface |
SearchTermBuilder
A SearchTermBuilder is used to create or edit an
SearchTerm . |
interface |
SelectComponent
Represents a single object selection.
|
interface |
SelectComponentList
Represents a list of objects on a selection list.
|
interface |
ShowComponentBuilder
Represents a
ShowComponentBuilder To create a new instance of this class, use AssemblyManager.createShowComponentBuilder() Created in NX6.0.0 |
interface |
SubsetBuilder
A SubsetBuilder is used to create or edit an
Subset . |
interface |
SubsetConfigurationBuilder
A SubsetConfigurationBuilder is used to edit the revision rule and effectivity used
to configure the contents of the subset.
|
interface |
UpdateDesignElementPositionBuilder
Represents the builder class that updates positions of the DE's(Shape/Reuse) or Subordinates with override that are out of date.
|
interface |
UpdateStructureBuilder
Represents a builder
UpdateStructureBuilder . |
Modifier and Type | Interface and Description |
---|---|
interface |
ObjectBuilder
Represents a Product Interface Object Builder.
|
interface |
PropertyBuilder
Represents a
PropertyBuilder builder To create a new instance of this class, use Collection.createPropertyBuilder() Created in NX9.0.0 |
Modifier and Type | Interface and Description |
---|---|
interface |
AdaptivityExclusionZoneBuilder
Builds a
AdaptivityExclusionZone object which
represets adaptivity meta solution related exclusion zones. |
interface |
AdaptivityMetaSolutionBuilder
Builds a
AdaptivityMetaSolution object which
represets a recipe for generating adaptive remesh. |
interface |
AssignNodalCSBuilder
Represents a
AssignNodalCSBuilder
To create a new instance of this class, use NodeElementInfoManager.createAssignNodalCsBuilder() Default values. |
interface |
AutoBCBuilder
Builds one or more
SimSimulationObject object(s). |
interface |
AutoMacViewerBuilder
Represents the correlation pairing viewer builder
To create a new instance of this class, use PreTestSolutionCollection.createAutoMacViewerBuilder(nxopen.TaggedObject) Created in NX6.0.0 |
interface |
AutomaticMorphBuilder
Represents a
AutomaticMorphBuilder To create a new instance of this class, use NodeElementManager.createAutomaticMorphBuilder() Created in NX9.0.0 |
interface |
AutomaticSweepBetweenSelection
Deprecated.
Deprecated in NX10.0.0. Use
Mesh3dHexBuilder .
|
interface |
AutoPairsBuilder
Builds a
AutoPairs object which
represets a recipe for generating face pairs from a selected set of faces
or solids in the model whose distance is less than a specified tolerance. |
interface |
BCSelectionDisplayBuilder
This class provides BC Selection Visual Display support, use this class to get the
BC types in currrent solution, adds special BCs to list, and display the BC's selection
geometry with the BC's color to do visually check
To create a new instance of this class, use SimSimulation.createBcSelectionDisplayBuilder() Default values. |
interface |
BeamEADBuilder
This class provides Beam/Bar Associated Data Support
To create a new instance of this class, use NodeElementManager.createBeamEadBuilder() Default values. |
interface |
BoltBuilder
Represents a
BoltBuilder
To create a new instance of this class, use BoltCollection.createBoltBuilder(nxopen.cae.Bolt) Created in NX7.5.0 |
interface |
BushingEADBuilder
This class provides Bushing Associated Data Support
To create a new instance of this class, use NodeElementManager.createBushingEadBuilder() Created in NX7.5.0 |
interface |
CaeRegionBuilder
Represents a
CaeRegionBuilder builder To create a new instance of this class, use SimSimulation.createCaeRegionBuilder(java.lang.String, nxopen.cae.CaeRegion) Created in NX7.0.0 |
interface |
CfdContactPreventionConstraintBuilder
Represents a
CfdContactPreventionConstraint builder To create a new instance of this class, use CfdContactPreventionConstraintCollection.createBuilder(nxopen.TaggedObject) Created in NX9.0.0 |
interface |
CfdLocalResolutionConstraintBuilder
Represents a
CfdLocalResolutionConstraint builder To create a new instance of this class, use CfdLocalResolutionConstraintCollection.createBuilder(nxopen.TaggedObject) Created in NX9.0.0 |
interface |
CircularImprintBuilder
Builder for creating Circular Imprint
To create a new instance of this class, use AbstractionManager.createCircularImprintBuilder() Created in NX7.5.0 |
interface |
ComacViewerBuilder
Represents the correlation MAC matrix viewer builder
To create a new instance of this class, use CorrelSolutionCollection.createComacViewerBuilder() Created in NX6.0.0 |
interface |
CombineTrisBuilder
Builder for creating Combine Tris
To create a new instance of this class, use NodeElementManager.createCombineTrisBuilder() Created in NX7.0.0 |
interface |
CompanionResultBuilder
Represents a
CompanionResult builder and can
be used to create or edit an CompanionResult To create a new instance of this class, use CompanionResultCollection.createCompanionResultBuilder(nxopen.cae.CompanionResult) Default values. |
interface |
ConflictResolutionBuilder
Represents a
ConflictResolutionBuilder builder which can resolve conflicts between the two input BCs by a specified rule To create a new instance of this class, use SimSolution.createConflictResolutionBuilder(nxopen.cae.SimGroupContainer, nxopen.cae.SimBC, nxopen.cae.SimBC) Created in NX10.0.0 |
interface |
ConstraintResolutionBuilder
Deprecated.
Deprecated in NX10.0.0. Use
ConflictResolutionBuilder instead.
|
interface |
ContactMeshBuilder
Represents a
ContactMeshBuilder
To create a new instance of this class, use MeshManager.createContactMeshBuilder(nxopen.cae.Mesh1d) Created in NX10.0.0 |
interface |
CorrelAlignmentBuilder
This builder is used to control the alignment parameters of a
CorrelSolution To create a new instance of this class, use SimSolution.createAlignmentBuilder() Created in NX6.0.1 |
interface |
CorrelApplyAlignmentFromBuilder
This builder is used to apply the alignment matrix read from selected xml file to the test model
To create a new instance of this class, use CorrelManager.createCorrelApplyAlignmentFromBuilder(nxopen.cae.SimSolution) Created in NX9.0.0 |
interface |
CorrelBaseBuilder
Represents the abstract builder class for all objects defined in correl meta solution
This is an abstract class, and cannot be created. |
interface |
CorrelFineTuneAlignmentBuilder
This builder is used to nudge the alignment by a fine adjustment
To create a new instance of this class, use CorrelManager.createCorrelFineTuneAlignmentBuilder(nxopen.cae.SimSolution) Created in NX9.0.0 |
interface |
CorrelModePairingBuilder
This builder is used to control the mode pairing behavior of a
CorrelSolution To create a new instance of this class, use CorrelSolution.createModePairingBuilder() Created in NX6.0.1 |
interface |
CorrelSolutionBuilder
This is a manager to the
CAE.CorrelSolution class. |
interface |
CreateJtBuilder
|
interface |
DeletePolygonFaceBuilder
Builder for Delete Polygon Face
To create a new instance of this class, use AbstractionManager.createDeletePolygonFaceBuilder() Created in NX8.5.0 |
interface |
DependentMeshBuilder
Represents a
Mesh2d
To create a new instance of this class, use MeshManager.createDependentMeshBuilder(nxopen.cae.DependentMesh) Created in NX5.0.0 |
interface |
DurabilityDamageEvaluationBuilder
Represents the builder for evaluating durability damage.
|
interface |
DurabilityEvaluateFatigueHistoryBuilder
Represents the builder for evaluating fatigue histories.
|
interface |
DurabilityEventBuilder
Represents the abstract builder class for all durability events.
|
interface |
DurabilityEventFatigueSettingsBuilder
Represents a builder class for the event fatigue settings.
|
interface |
DurabilityEventOverridesBuilder
Represents a builder class for Event Overrides.
|
interface |
DurabilityEventSolverBuilder
Represents the builder for solving the durability event.
|
interface |
DurabilityEventStrengthSettingsBuilder
Represents a builder class for the event strength settings.
|
interface |
DurabilityExcitationBuilder
Represents the abstract builder class for all durability excitations.
|
interface |
DurabilityFunctionExcitationBuilder
Represents a
DurabilityFunctionExcitation builder. |
interface |
DurabilityLoadPatternBuilder
Represents a
CAE.DurabilityLoadPattern builder. |
interface |
DurabilityMetaSolutionBuilder
Represents a
DurabilityMetaSolution builder. |
interface |
DurabilityRandomEventBuilder
Represents the builder for the random durability event.
|
interface |
DurabilityRandomFatigueBuilder
Represents a builder class for the event fatigue settings.
|
interface |
DurabilityResultPathBuilder
Represents a
DurabilityResultPath builder. |
interface |
DurabilitySolverBuilder
Represents the builder for solving the durability solution process.
|
interface |
DurabilityStaticEventBuilder
Represents the builder for the static durability event.
|
interface |
DurabilityStrainGageAnalyzerBuilder
Represents the builder for analyzing strain gage data.
|
interface |
DurabilityStressAxesBuilder
Represents a builder class for the event fatigue settings.
|
interface |
DurabilityTransientEventBuilder
Represents the builder for the transient durability event.
|
interface |
EdgeSticherBuilder
Represents a
EdgeSticherBuilder To create a new instance of this class, use FemPart.createEdgeSticherBuilder() Default values. |
interface |
ElementConnectivityBuilder
Represents a
ElementConnectivityBuilder
To create a new instance of this class, use NodeElementManager.createElementConnectivityBuilder() Created in NX5.0.0 |
interface |
ElementCreateBuilder
Represents a
ElementCreateBuilder which allows you to manually create elements from existing nodes. |
interface |
ElementDeleteBuilder
Represents a
ElementDeleteBuilder
To create a new instance of this class, use NodeElementManager.createDeleteElementBuilder() Created in NX5.0.0 |
interface |
ElementExtractBuilder
Builder for creating Element Extract
To create a new instance of this class, use NodeElementManager.createElementExtractBuilder() Created in NX7.5.0 |
interface |
ElementExtrudeBuilder
Represents a
ElementExtrudeBuilder
To create a new instance of this class, use NodeElementManager.createElementExtrudeBuilder() Created in NX5.0.0 |
interface |
ElementModifyLabelBuilder
Represents a
ElementModifyLabelBuilder
To create a new instance of this class, use NodeElementManager.createElementModifyLabelBuilder() Created in NX5.0.0 |
interface |
ElementModifyOrderBuilder
Represents a
ElementModifyOrderBuilder
To create a new instance of this class, use NodeElementManager.createElementModifyOrderBuilder() Created in NX6.0.1 |
interface |
ElementModifyTypeBuilder
Represents a
ElementModifyTypeBuilder
To create a new instance of this class, use NodeElementManager.createElementModifyTypeBuilder() Created in NX8.5.0 |
interface |
ElementProjectBuilder
Represents a
ElementProjectBuilder
To create a new instance of this class, use NodeElementManager.createElementProjectBuilder() Created in NX5.0.0 |
interface |
ElementReflectBuilder
Represents a
ElementReflectBuilder
To create a new instance of this class, use NodeElementManager.createElementReflectBuilder() Created in NX5.0.0 |
interface |
ElementRevolveBuilder
Represents a
ElementRevolveBuilder
To create a new instance of this class, use NodeElementManager.createElementRevolveBuilder() Created in NX5.0.0 |
interface |
ElementSplitBuilder
Represents a
ElementSplitBuilder
To create a new instance of this class, use NodeElementManager.createElementSplitBuilder() Created in NX5.0.0 |
interface |
ElementTranslateBuilder
Represents a
ElementTranslateBuilder
To create a new instance of this class, use NodeElementManager.createElementTranslateBuilder() Created in NX5.0.0 |
interface |
FaceFromBoundaryBuilder
Builder for creating Polygon Face by boundary
To create a new instance of this class, use AbstractionManager.createFaceFromBoundaryBuilder() Created in NX8.5.0 |
interface |
FlatPatternsBuilder
Represents a Flat Patterns Builder.
|
interface |
FluidDomainBuilder
Represents a
FluidDomainRecipe
To create a new instance of this class, use FluidDomainCollection.createBuilder(nxopen.cae.FluidDomainRecipe) Default values. |
interface |
FreeBodyResultsBuilder
Represents a
FreeBodyResultsBuilder To obtain an instance of this class use Session.resultManager() . |
interface |
FreezeGeometryBuilder
Builder for creating Freeze Geometry
To create a new instance of this class, use GeometryRecipeCollection.createFreezeGeometryBuilder(nxopen.cae.FreezeGeometryRecipe) Created in NX10.0.0 |
interface |
FunctionBuilder
This builder class is used to create or edit
Function objects. |
interface |
GapEADBuilder
This class provides Gap Associated Data Support
To create a new instance of this class, use NodeElementManager.createGapEadBuilder() Created in NX7.5.0 |
interface |
GeneralGeometryBeamSectionBuilder
Represents a
GeneralGeometryBeamSectionBuilder
To create a new instance of this class, use BeamSectionCollection.createGeneralGeometryBeamSectionBuilder(nxopen.cae.GeneralGeometryBeamSection) Created in NX7.5.0 |
interface |
GlobalLayupImportFromPptBuilder
Represents a Global Layup IMport From Ppt Builder.
|
interface |
IBeamSectionBuilder
|
interface |
LaminateDampingFactorBuilder
The builder for the damping factor.
|
interface |
LaminateDrapingDataBuilder
Represents a
LaminateDrapingData builder To create a new instance of this class, use LaminatePly.createDrapingDataBuilder() Created in NX6.0.0 |
interface |
LaminateDrapingExtensionBuilder
Builder class for
LaminateDrapingExtension To create a new instance of this class, use LaminatePly.createDrapingExtensionBuilder() Created in NX8.5.0 |
interface |
LaminateDynamicEventBuilder
Represents a
LaminateDynamicEvent builder This is an abstract class. |
interface |
LaminateDynamicSimBuilder
Represents a
LaminateDynamicSim builder To create a new instance of this class, use LaminateDynamicSimCollection.createDynamicSimBuilder(nxopen.cae.LaminateDynamicSim) Created in NX9.0.0 |
interface |
LaminateElementFilterBuilder
Represents a
nxopen.cae.LaminateGraphicalReport builder There is no kf creator. |
interface |
LaminateExtrudeSetupBuilder
Represents a
LaminateExtrudeSetup builder To create a new instance of this class, use LaminateGlobalLayupMgr.createLaminateExtrudeSetupBuilder(nxopen.cae.LaminateExtrudeSetup) Default values. |
interface |
LaminateFiberOrientationOptionsBuilder
Represents a
LaminateFiberOrientationOptions builder To create a new instance of this class, use LaminateGlobalLayup.createFiberOrientationOptionsBuilder() Created in NX7.5.0 |
interface |
LaminateFillSetupBuilder
Represents a
LaminateFillSetupBuilder builder To create a new instance of this class, use LaminateGlobalLayupMgr.createLaminateFillSetupBuilder(nxopen.cae.LaminateExtrudeSetup) Created in NX7.5.2 |
interface |
LaminateImportedLayupBuilder
Represents a
LaminateImportedLayupBuilder builder To create a new instance of this class, use LaminateGlobalLayupMgr.createLaminateImportedLayupBuilder(nxopen.cae.LaminateGlobalLayup) Default values. |
interface |
LaminateImportZonesBuilder
Represents a
LaminateImportZonesBuilder builder To create a new instance of this class, use LaminateGlobalLayupMgr.createLaminateImportZonesBuilder() Created in NX10.0.0 |
interface |
LaminateLayupOffsetBuilder
Represents a
LaminateLayupOffset builder To create a new instance of this class, use LaminateGlobalLayupMgr.createLayupOffsetBuilder(nxopen.cae.LaminateLayupOffset) Created in NX7.5.0 |
interface |
LaminateLockAngleBuilder
Represents a builder
To create a new instance of this class, use LaminateGlobalLayup.createLockAngleBuilder() Created in NX7.5.0 |
interface |
LaminateMatOrientationBuilder
Represents a
LaminateMatOrientation builder To create a new instance of this class, use LaminateGlobalLayupMgr.createLaminateMatOrientationBuilder(nxopen.cae.LaminateMatOrientation) Created in NX7.5.0 |
interface |
LaminatePlyFilterBuilder
Represents a
LaminatePlyFilterBuilder There is no kf creator. |
interface |
LaminatePlyMaxThicknessVarBuilder
Builder used to modify the ply maximum accepted thickness variation for laminate fill
To create a new instance of this class, use LaminatePly.createLaminatePlyMaxThicknessVarBuilder() Created in NX8.5.0 |
interface |
LaminateRandomEventBuilder
Represents a
LaminateRandomEvent builder To create a new instance of this class, use LaminateDynamicEventCollection.createRandomEventBuilder(nxopen.cae.LaminateRandomEvent) Created in NX9.0.0 |
interface |
LaminateRelabelPliesBuilder
Represents a
CAE.LaminateDynamicEvent builder To create a new instance of this class, use LaminateGlobalLayupMgr.createRelabelPliesBuilder() Created in NX10.0.0 |
interface |
LaminateSelectEntitiesBuilder
Represents a
LaminateSelectEntitiesBuilder To create a new instance of this class, use LaminateGlobalLayupMgr.createLaminateSelectEntitiesBuilder() Created in NX7.5.2 |
interface |
LaminateSineEventBuilder
Represents a
LaminateSineEvent builder To create a new instance of this class, use LaminateDynamicEventCollection.createSineEventBuilder(nxopen.cae.LaminateSineEvent) Created in NX10.0.0 |
interface |
LaminateViewDrapingResultsBuilder
Represents the builder for the draping results viewer
To create a new instance of this class, use LaminateGlobalLayupMgr.createViewDrapingResultsBuilder(nxopen.cae.LaminateGlobalLayup, nxopen.cae.LaminatePly) Created in NX6.0.0 |
interface |
LbcAssociationMgr
|
interface |
LocalRemeshBuilder
Represents a
LocalRemeshBuilder
To create a new instance of this class, use MeshManager.createLocalRemeshBuilder() Default values. |
interface |
LumpedMassEADBuilder
This class provides LumpedMass Associated Data Support
To create a new instance of this class, use NodeElementManager.createLumpedMassEadBuilder() Default values. |
interface |
ManualMorphBuilder
Represents a
ManualMorphBuilder To create a new instance of this class, use NodeElementManager.createManualMorphBuilder() Created in NX9.0.0 |
interface |
ManualNodeAssociationBuilder
Represents a
ManualNodeAssociationBuilder
To create a new instance of this class, use NodeElementManager.createManualNodeAssociationBuilder() Created in NX10.0.0 |
interface |
ManualSweepBetweenSelection
Deprecated.
Deprecated in NX10.0.0. Use
CAE.Mesh3dHexBuilder .
|
interface |
MappedMeshBuilder
Represents a Mapped Mesh Builder.
|
interface |
MechanicalLoadSumBuilder
Represents a
MechanicalLoadSumBuilder
To create a new instance of this class, use nxopen.cae.modelcheckManager#createMechanicalLoadSumBuilder Created in NX5.0.1 |
interface |
Mesh0dBuilder
Represents 0D Mesh
Used to create a
Mesh0d
To create a new instance of this class, use MeshManager.createMesh0dBuilder(nxopen.cae.Mesh0d) Created in NX6.0.0 |
interface |
Mesh1dBuilder
Represents 1d Mesh
Used to create a
Mesh1d
To create a new instance of this class, use MeshManager.createMesh1dBuilder(nxopen.cae.Mesh1d) Created in NX6.0.0 |
interface |
Mesh2dBuilder
Represents 2D Mesh
Used to create a
Mesh2d
To create a new instance of this class, use MeshManager.createMesh2dBuilder(nxopen.cae.Mesh2d) Created in NX6.0.0 |
interface |
Mesh3dHexBuilder
Represents 3D Hex Mesh
Used to create a
SweptMesh
To create a new instance of this class, use MeshManager.createMesh3dHexBuilder(nxopen.cae.SweptMesh) Created in NX6.0.0 |
interface |
Mesh3dTetBuilder
Represents 3D Mesh
Used to create a
CAE.Mesh3d
To create a new instance of this class, use MeshManager.createMesh3dTetBuilder(nxopen.cae.Mesh3d) Created in NX6.0.0 |
interface |
MeshCollectorBuilder
Represents a
MeshCollectorBuilder
To create a new instance of this class, use MeshManager.createCollectorBuilder(nxopen.cae.MeshCollector, java.lang.String) Created in NX5.0.0 |
interface |
MeshCollectorOccurrenceBuilder
Represents a
MeshCollectorOccurrenceBuilder
To create a new instance of this class, use MeshManagerOccurrence.createOccurrenceBuilder(nxopen.cae.MeshCollectorOccurrence) Created in NX5.0.0 |
interface |
MeshControlBuilder
Represents a
MeshControl
To create a new instance of this class, use MeshControlCollection.createBuilder(nxopen.cae.MeshControl) Default values. |
interface |
MeshControlDisplayOptionsBuilder
Represents a
MeshControlDisplayOptionsBuilder
To create a new instance of this class, use MeshControlDisplayManager.createBuilder() Created in NX5.0.0 |
interface |
MeshFromBoundaryBuilder
Represents a
MeshFromBoundaryBuilder
To create a new instance of this class, use NodeElementManager.createMeshFromBoundaryBuilder() Created in NX9.0.0 |
interface |
MeshPointConicCenterBuilder
Represents a
MeshPointConicCenterBuilder
To create a new instance of this class, use MeshPointCollection.createMeshpointConicCenterBuilder() Created in NX5.0.2 |
interface |
MeshPointExistingPointBuilder
Represents a
MeshPointExistingPointBuilder
To create a new instance of this class, use MeshPointCollection.createMeshpointExistingPointBuilder() Created in NX5.0.2 |
interface |
MeshPointMultipleOnCurveBuilder
Represents a
MeshPointMultipleOnCurveBuilder
To create a new instance of this class, use MeshPointCollection.createMeshpointMultipleOnCurveBuilder() Created in NX5.0.2 |
interface |
MeshPointOnCurveBuilder
Represents a
MeshPointOnCurveBuilder
To create a new instance of this class, use MeshPointCollection.createMeshpointOnCurveBuilder() Created in NX5.0.2 |
interface |
MeshPointOnFaceBuilder
Represents a
MeshPointOnFaceBuilder
To create a new instance of this class, use MeshPointCollection.createMeshpointOnFaceBuilder() Created in NX5.0.2 |
interface |
MeshPointProjectBuilder
Represents a
MeshPointProjectBuilder
To create a new instance of this class, use MeshPointCollection.createMeshpointProjectBuilder() Created in NX5.0.2 |
interface |
MMCCreateBuilder
Represents a
MMCCreateBuilder which can be used to create or edit
MeshMate objects. |
interface |
ModelDisplayBuilder
This class provides Model Display Data Support
To create a new instance of this class, use CaePart.createModelDisplayBuilder() Default values. |
interface |
ModelUpdateCorrelMethodBuilder
Represents a
ModelUpdateCorrelMethodBuilder To create a new instance of this class, use ModelUpdateSolution.createCorrelMethodBuilder() Created in NX7.5.0 |
interface |
ModelUpdateDesignVariablesRapidCreateBuilder
This class is the builder that is used for the rapid creation of design variables.
|
interface |
ModelUpdateOptimOptionsBuilder
Represents a
ModelUpdateOptimOptionsBuilder To create a new instance of this class, use ModelUpdateSolution.createOptimOptionsBuilder() Created in NX7.5.0 |
interface |
ModelUpdateOptionsBuilder
Represents a
ModelUpdateOptionsBuilder To create a new instance of this class, use ModelUpdateSolution.createOptionsBuilder() Created in NX7.5.0 |
interface |
ModelUpdateOverallWeightsBuilder
Represents a
ModelUpdateOverallWeightsBuilder To create a new instance of this class, use ModelUpdateSolution.createOverallWeightsBuilder() Created in NX7.5.0 |
interface |
ModelUpdateSensitivityViewerBuilder
Represents
ModelUpdateSensitivityViewerBuilder To create a new instance of this class, use ModelUpdateSolutionCollection.createSensitivityViewerBuilder(nxopen.cae.ModelUpdateSolution) Created in NX6.0.0 |
interface |
ModelUpdateSolutionBuilder
Represents a
ModelUpdateSolutionBuilder To create a new instance of this class, use ModelUpdateSolutionCollection.createSolutionBuilder(nxopen.cae.ModelUpdateSolution) Created in NX7.5.0 |
interface |
MultipleElementCreateBuilder
Represents a
MultipleElementCreateBuilder which can be used to create
mutiple elements in one efficient opertation. |
interface |
MultipleNodeCreateBuilder
Represents a
MultipleNodeCreateBuilder which can be used to create
mutiple nodes in one efficient opertation. |
interface |
NodeAlignBuilder
Represents a
NodeAlignBuilder
To create a new instance of this class, use NodeElementManager.createNodeAlignBuilder() Created in NX5.0.0 |
interface |
NodeAssociationBuilder
Represents a
NodeAssociationBuilder
To create a new instance of this class, use NodeElementManager.createNodeAssociationBuilder() Created in NX9.0.0 |
interface |
NodeCreateBuilder
Represents a
NodeCreateBuilder . |
interface |
NodeDeleteBuilder
Represents a
NodeDeleteBuilder
To create a new instance of this class, use NodeElementManager.createNodeDeleteBuilder() Created in NX5.0.0 |
interface |
NodeDissociationBuilder
Represents a
NodeDissociationBuilder
To create a new instance of this class, use NodeElementManager.createNodeDissociationBuilder() Created in NX9.0.0 |
interface |
NodeElementInfoBuilder
Represents a
NodeElementInfoBuilder
To create a new instance of this class, use NodeElementInfoManager.createNodeElementInfoBuilder() Created in NX5.0.0 |
interface |
NodeModifyLabelBuilder
Represents a
NodeModifyLabelBuilder
To create a new instance of this class, use NodeElementManager.createNodeModifyLabelBuilder() Created in NX5.0.0 |
interface |
NodeProjectBuilder
Represents a
NodeProjectBuilder
To create a new instance of this class, use NodeElementManager.createNodeProjectBuilder() Created in NX8.5.0 |
interface |
NodeReflectBuilder
Represents a
NodeReflectBuilder
To create a new instance of this class, use NodeElementManager.createNodeReflectBuilder() Created in NX5.0.0 |
interface |
NodeRotateBuilder
Represents a
NodeRotateBuilder
To create a new instance of this class, use NodeElementManager.createNodeRotateBuilder() Created in NX5.0.0 |
interface |
NodesBetweenNodesBuilder
Represents a
NodesBetweenNodesBuilder
To create a new instance of this class, use NodeElementManager.createNodesBetweenNodesBuilder() Created in NX5.0.0 |
interface |
NodesOnCurveBuilder
Represents a
NodesOnCurveBuilder
To create a new instance of this class, use NodeElementManager.createNodesOnCurveBuilder() Created in NX5.0.0 |
interface |
NodesRepositionBuilder
Represents a
NodesRepositionBuilder
To create a new instance of this class, use NodeElementManager.createNodesRepositionBuilder() Created in NX6.0.2 |
interface |
NodeTranslateBuilder
Represents a
NodeTranslateBuilder
To create a new instance of this class, use NodeElementManager.createNodeTranslateBuilder() Created in NX5.0.0 |
interface |
OneDimensionalElementSplitBuilder
Represents a
OneDimensionalElementSplitBuilder
To create a new instance of this class, use NodeElementManager.createOneDimensionalElementSplitBuilder() Created in NX8.5.0 |
interface |
PolygonFaceOnMeshBuilder
Builder for creating Polygon Face On Mesh
To create a new instance of this class, use AbstractionManager.createPolygonFaceOnMeshBuilder() Created in NX7.5.2 |
interface |
Post3DGraphBuilder
Represents a
Post3DGraphBuilder
This is an abstract class and cannot be instantiated Created in NX10.0.0 |
interface |
PostGraphAcrossIterationsBuilder
Represents a
PostGraphAcrossIterationsBuilder
This is an abstract class and cannot be instantiated Created in NX9.0.0 |
interface |
PostGraphAlongPathBuilder
Represents a
PostGraphAlongPathBuilder
This is an abstract class and cannot be instantiated Created in NX9.0.0 |
interface |
PostGraphBuilder
Represents a
PostGraphBuilder
This is an abstract class and cannot be instantiated Created in NX9.0.0 |
interface |
PostGraphOrbitBuilder
Represents a
PostGraphOrbitBuilder
This is an abstract class and cannot be instantiated Created in NX9.0.0 |
interface |
PreTestDofSetBuilder
Represents a
PreTestDofSet builder To create a new instance of this class, use PreTestSolutionCollection.createPretestDofsetBuilder(nxopen.cae.PreTestDofSet) Created in NX7.5.0 |
interface |
PreTestExciterConfigBuilder
Represents a
PreTestExciterConfig builder To create a new instance of this class, use PreTestSolutionCollection.createExciterConfigBuilder(nxopen.cae.PreTestExciterConfig) Default values. |
interface |
PreTestExportUnvBuilder
This is a manager to the
PreTestExportUnvBuilder class. |
interface |
PreTestSensorConfigBuilder
Represents a
PreTestSensorConfig builder To create a new instance of this class, use PreTestSolutionCollection.createSensorConfigBuilder(nxopen.cae.PreTestSensorConfig) Default values. |
interface |
PreTestSolutionBuilder
Represents a
PreTestSolution builder To create a new instance of this class, use PreTestSolutionCollection.createPretestBuilder(nxopen.cae.PreTestSolution) Created in NX7.5.0 |
interface |
PrimitiveMeshBuilder
Represents Primitive Mesh
Used to create a
CAE.Mesh
To create a new instance of this class, use MeshManager.createPrimitiveMeshBuilder(nxopen.cae.Mesh) Created in NX7.5.1 |
interface |
ProjectNodesToCadGeometryBuilder
Allows you to query the mesh nodes that are off the underlying Cad geometry by a given tolerance,
and if requested this builder can adjust the node locations to put them back on
to the underlying Cad geometry.
|
interface |
ReassignElementsBuilder
Represents a
ReassignElementsBuilder
To create a new instance of this class, use MeshManager.createReassignElementsBuilder() Created in NX5.0.0 |
interface |
ResultProbeBuilder
Result probe Builder
An instance of this class can not be obtained . |
interface |
ResultsCombinationBuilder
Represents a
ResultsCombinationBuilder To obtain an instance of this class use Session.resultManager() . |
interface |
ResultsEnvelopeBuilder
Represents a
ResultsEnvelopeBuilder To obtain an instance of this class use Session.resultManager() . |
interface |
ResultsManipulationBuilder
Represents an abstract
ResultsManipulationBuilder This is an abstract class and cannot be instantiated Created in NX7.5.2 |
interface |
ResultsReductionBuilder
Represents a
ResultsReductionBuilder To obtain an instance of this class use Session.resultManager() . |
interface |
SelectCAEBody
Represents a single object selection.
|
interface |
SelectCAEBodyList
Represents a list of objects on a selection list.
|
interface |
SelectCAEEdge
Represents a single object selection.
|
interface |
SelectCAEEdgeList
Represents a list of objects on a selection list.
|
interface |
SelectCAEFace
Represents a single object selection.
|
interface |
SelectCAEFaceList
Represents a list of objects on a selection list.
|
interface |
SelectElementsBuilder
Represents a
SelectElementsBuilder
To create a new instance of this class, use SelectElementsManager.createSelectElementsBuilder() Created in NX5.0.0 |
interface |
SelectFEElemFaceList
Represents a list of objects on a selection list.
|
interface |
SelectFENodeList
Represents a list of objects on a selection list.
|
interface |
SelectMeshList
Represents a list of objects on a selection list.
|
interface |
ShapeMetricViewerBuilder
Represents the correlation Shape metrics viewer builder
To create a new instance of this class, use CorrelSolutionCollection.createShapeMetricViewerBuilder(nxopen.cae.CorrelSolution) Created in NX7.5.0 |
interface |
Shell2SolidBuilder
Represents 3D Tet Mesh
Used to create a
CAE.Mesh3d
To create a new instance of this class, use MeshManager.createShell2solidBuilder(nxopen.cae.Mesh3d) Created in NX6.0.0 |
interface |
ShellEADBuilder
This class provides Shell Associated Data Support
To create a new instance of this class, use NodeElementManager.createShellEadBuilder() Default values. |
interface |
ShowAdjacentBuilder
Represents a
ShowAdjacentBuilder
To create a new instance of this class, use ShowHideManager.createShowAdjacentBuilder() Created in NX5.0.0 |
interface |
ShowHideBuilder
Represents a
ShowHideBuilder
To create a new instance of this class, use ShowHideManager.createShowHideBuilder() Created in NX5.0.0 |
interface |
ShowOnlyBuilder
Represents a
ShowOnlyBuilder
To create a new instance of this class, use ShowHideManager.createShowOnlyBuilder() Created in NX5.0.0 |
interface |
SimBcPlotContoursBuilder
Represents a
SimBcPlotContoursBuilder builder
which can be used to generate a plot of a SimBC
in the graphics area. |
interface |
SimBcXyPlotBuilder
Represents a
SimBcXyPlotBuilder builder
which can be used to generate a XY plot of a SimBC
in the graphics area. |
interface |
SimLoadSetBuilder
Represents a
SimLoadSetBuilder builder To create a new instance of this class, use SimSimulation.createLoadSetBuilder(java.lang.String, java.lang.String, nxopen.cae.SimLoadSet, int) Created in NX10.0.0 |
interface |
SimMotionLoadsBuilder
Represents a
SimMotionLoadsBuilder
To create a new instance of this class, use SimSimulation.createMotionLoadsBuilder() Created in NX5.0.1 |
interface |
SimMotionLoadsListItemBuilder
Represents a
SimMotionLoadsListItemBuilder
To create a new instance of this class, use SimSimulation.createMotionLoadsListItemBuilder() Created in NX5.0.1 |
interface |
SolidPropertyCheckBuilder
Represents a
SolidPropertyCheckBuilder
To create a new instance of this class, use nxopen.cae.modelcheckManager#createSolidPropertyCheckBuilder Created in NX5.0.1 |
interface |
SolutionManager
Represents
SolutionManager
To create a new instance of this class, use SimSimulation.createSolutionManager() Created in NX10.0.0 |
interface |
SpiderElementBuilder
Represents a
SpiderElementBuilder
To create a new instance of this class, use NodeElementManager.createSpiderElementBuilder() Created in NX5.0.1 |
interface |
SpringEADBuilder
This class provides Spring Associated Data Support
To create a new instance of this class, use NodeElementManager.createSpringEadBuilder() Default values. |
interface |
StandardBeamSectionBuilder
Represents a
StandardBeamSectionBuilder
To create a new instance of this class, use BeamSectionCollection.createStandardBeamSectionBuilder(nxopen.cae.StandardBeamSection) Created in NX7.5.0 |
interface |
StepManager
Represents
StepManager
To create a new instance of this class, use SimSimulation.createStepManager(nxopen.cae.SimSolution) Created in NX10.0.0 |
interface |
SuppressHoleBuilder
Builder for creating Hole Suppression Hole
To create a new instance of this class, use AbstractionManager.createSuppressHoleBuilder() Default values. |
interface |
SurfaceCoatBuilder
Builder for creating Surface Coat
To create a new instance of this class, use MeshManager.createSurfaceCoatBuilder(nxopen.cae.MeshShellFromSolid) Created in NX6.0.1 |
interface |
SweepBetweenMeshBuilder
Deprecated.
Deprecated in NX10.0.0. Use
CAE.Mesh3dHexBuilder .
|
interface |
ThicknessBuilder
Represents a
ThicknessBuilder
To create a new instance of this class, use NodeElementInfoManager.createThicknessBuilder(nxopen.cae.Mesh) Created in NX6.0.1 |
interface |
ThicknessPlotContoursBuilder
Represents a
ThicknessPlotContoursBuilder builder
which can be used to generate a plot of a SimBC in the graphics area. |
interface |
TransientResultsReductionBuilder
Represents a
TransientResultsReductionBuilder To obtain an instance of this class use Session.resultManager() . |
interface |
UnStitchEdgeBuilder
Represents a
UnStitchEdgeBuilder To create a new instance of this class, use FemPart.createUnStitchEdgeBuilder() Created in NX6.0.0 |
interface |
UserDefinedSolidBeamSectionBuilder
Represents a
UserDefinedSolidBeamSectionBuilder
To create a new instance of this class, use BeamSectionCollection.createUserDefinedSolidBeamSectionBuilder(nxopen.cae.UserDefinedSolidBeamSection) Created in NX7.5.0 |
interface |
ViewLaminateBuilder
Represents a View Laminate Builder.
|
interface |
WeldBuilder
Represents a
WeldBuilder
To create a new instance of this class, use MeshManager.createWeldBuilder(nxopen.cae.Mesh) Created in NX7.5.2 |
Modifier and Type | Interface and Description |
---|---|
interface |
AlignShellElementNormalBuilder
Represents a
AlignShellElementNormalBuilder builder used to align the normals of
connected shell elements with a seed shell element. |
interface |
DuplicateElementsCheckBuilder
Represents a
DuplicateElementsCheckBuilder
to check for duplicate elements within the candidate elements. |
interface |
DuplicateNodesCheckBuilder
Represents a
DuplicateNodesCheckBuilder
to check for duplicate nodes within the candidate nodes. |
interface |
ElementEdgeCheckBuilder
Represents a
ElementEdgeCheckBuilder which can be
used to detect free element edges or non-manifold edges. |
interface |
ElementMaterialOrientationCheckBuilder
Represents a
ElementMaterialOrientationCheckBuilder
used to check the material orientation for shell and solid elements. |
interface |
ElementQualityCheckBuilder
Represents a
ElementQualityCheckBuilder to
perform quality checking on the candidate elements. |
interface |
FaceClearanceCheckBuilder
Represents a
FaceClearanceCheckBuilder to perform polygon face
interference or clearance check. |
interface |
ModelSetupCheckBuilder
Represents a
ModelSetupCheckBuilder which can be
used to check if the active SimSolution contains all the necessary
items for the analysis, including elements, loads, constraints and materials. |
interface |
ReverseShellElementNormalBuilder
Represents a
ReverseShellElementNormalBuilder used to reverse normals
for specified shell elements. |
Modifier and Type | Interface and Description |
---|---|
interface |
BaseBuilder
Represents the abstract builder class for all objects defined in response analysis meta solution
This is an abstract class, and cannot be created. |
interface |
CsdEvaluationSettingBuilder
Represents the CSD build
To create a new instance of this class, use EvaluationSettingManager.createCsdEvaluationSettingBuilder(nxopen.cae.responsesimulation.CsdEvaluationSetting) Created in NX6.0.0 |
interface |
CSDExcitationBuilder
Represents the manager to
CSDExcitation . |
interface |
DDAMExcitationBuilder
Represents the manager to
DDAMExcitation . |
interface |
DistributedLoadExcitationBuilder
Represents the manager to
DistributedLoadExcitation . |
interface |
DynamicResultEvaluationSettingBuilder
Represents the abstract builder class of evaluation setting for all dynamic results evaluations.
|
interface |
ElementalFunctionEvaluationSettingBuilder
This is a manager to the
ElementalFunctionEvaluationSetting class. |
interface |
EvaluationSettingBuilder
Represents the abstract builder class of all evaluation setting classes.
|
interface |
ExcitationBuilder
Represents the abstract excitation builder class.
|
interface |
FrfEvaluationSettingBuilder
This is a manager to the
FrfEvaluationSetting class. |
interface |
FunctionEvaluationSettingBuilder
Represents the abstract builder class of evaluation setting for function response evaluation
This is an abstract class, and cannot be created. |
interface |
LcrResultsEvaluationSettingBuilder
This is a manager to the
LcrResultsEvaluationSetting class. |
interface |
ModalResultsEvaluationSettingBuilder
Represents the abstract builder class of evaluation setting for FRF and transmissibility
This is an abstract class, and cannot be created. |
interface |
NodalFunctionEvaluationSettingBuilder
This is a manager to the
NodalFunctionEvaluationSetting class. |
interface |
NodalFunctionExcitationBuilder
Represents the manager to
NodalFunctionExcitation . |
interface |
PeakValueEvaluationSettingBuilder
This is a manager to the
PeakValueEvaluationSetting class. |
interface |
PrlResultsEvaluationSettingBuilder
Represents the abstract builder class of evaluation setting for peak value, RMS results
and LCR results.
|
interface |
ResponseResultsEvaluationSettingBuilder
This is a manager to the
ResponseResultsEvaluationSetting class. |
interface |
RmsResultsEvaluationSettingBuilder
This is a manager to the
RmsResultsEvaluationSetting class. |
interface |
RotationalDDAMExcitationBuilder
Represents the manager to
CAE.ResponseSimulation.DDAMExcitation . |
interface |
RotationalNodalFunctionExcitationBuilder
Represents the manager to
RotationalNodalFunctionExcitation . |
interface |
RSEventBuilder
Represents the manager of CAE.ResponseSimulation.RSEvent.
|
interface |
SensorBuilder
Represents a
SensorBuilder
To create a new instance of this class, use SensorCollection.createSensorBuilder(nxopen.cae.responsesimulation.Sensor) Created in NX5.0.0 |
interface |
SensorEvaluationSettingBuilder
This is a manager to the
SensorEvaluationSetting class. |
interface |
SolutionBuilder
This is a manager to the
Solution class. |
interface |
StaticLoadExcitationBuilder
Represents the manager to
StaticLoadExcitation . |
interface |
StrainGageBuilder
Represents a StrainGageBuilder
To create a new instance of this class, use StrainGageCollection.createStrainGageBuilder(nxopen.cae.responsesimulation.StrainGage) Default values. |
interface |
StrainGageEvaluationSettingBuilder
This is a manager to the
StrainGageEvaluationSetting class. |
interface |
StrengthResultsEvaluationSettingBuilder
This is a manager to the
StrengthResultsEvaluationSetting class. |
interface |
TranslationalDDAMExcitationBuilder
Represents the manager to
CAE.ResponseSimulation.DDAMExcitation . |
interface |
TranslationalNodalFunctionExcitationBuilder
Represents the manager to
TranslationalNodalFunctionExcitation . |
interface |
TransmissibilityEvaluationSettingBuilder
This is a manager to the
TransmissibilityEvaluationSetting class. |
interface |
VelocityImpactExcitationBuilder
Represents a
VelocityImpactExcitationBuilder
To create a new instance of this class, use ExcitationCollection.createVelocityImpactExcitationBuilder(nxopen.cae.responsesimulation.VelocityImpactExcitation) Default values. |
interface |
VelocityImpactParameters
|
Modifier and Type | Interface and Description |
---|---|
interface |
AlongMachineAxisMoveBuilder
Represents Along MCS Axis Move Builder
To create a new instance of this class, use MoveCollection.createAlongMcsAxisMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
AlongMcsAxisMoveBuilder
Represents Along MCS Axis Move Builder
To create a new instance of this class, use MoveCollection.createAlongMcsAxisMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
AlongToolAxisMoveBuilder
Represents the Move To Point Builder
To create a new instance of this class, use MoveCollection.createAlongToolAxisMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
BladeCutLevels
Represents a Blade Cut Levels Builder
This is an abstract class and cannot be instantiated. |
interface |
Boundary
Represents a CAM boundary object .
|
interface |
BoundaryTurnBlank
Represents a
BoundaryTurnBlank
This builder cannot be instantiated separately. |
interface |
BoundaryTurnMemberCorner
Represents a
BoundaryTurnMemberCorner
This builder cannot be instantiated separately. |
interface |
BoundaryTurnMemberEvents
Represents a
BoundaryTurnMemberEvents
This builder cannot be instantiated separately. |
interface |
BoundaryTurnMemberFeed
Represents a
BoundaryTurnMemberFeed
This builder cannot be instantiated separately. |
interface |
BoundaryTurnMemberFineFinishCorner
Represents a
BoundaryTurnMemberFineFinishCorner
This builder cannot be instantiated separately. |
interface |
BoundaryTurnMemberFineFinishOffset
Represents a
BoundaryTurnMemberFineFinishOffset
This builder cannot be instantiated separately. |
interface |
BoundaryTurnMemberOffset
Represents a
BoundaryTurnMemberOffset
This builder cannot be instantiated separately. |
interface |
CamGeneralPropertiesBuilder
Deprecated.
Deprecated in NX9.0.1. Use
GeneralPropertiesBuilder instead.
|
interface |
CavityMillingBuilder
Represents a CavityMilling Builder
To create a new instance of this class, use OperationCollection.createCavityMillingBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
CenterlineDrillTurningBuilder
Represents a CenterlineDrillTurningBuilder
To create a new instance of this class, use OperationCollection.createCenterlineDrillTurningBuilder(nxopen.cam.CAMObject) Created in NX6.0.0 |
interface |
ChamferMillingBuilder
Represents a ChamferMillingBuilder Builder
To create a new instance of this class, use OperationCollection.createChamferMillingBuilder(nxopen.cam.CAMObject) Created in NX9.0.2 |
interface |
CircularAboutAxisMoveBuilder
Represents the Circular Move To Point Builder
To create a new instance of this class, use MoveCollection.createCircularAboutAxisMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
CollisionConfigurationBuilder
Represents a
CollisionConfigurationBuilder
This is an abstract class, and cannot be instantiated. |
interface |
CollisionPairBuilder
Represents a
CollisionPairBuilder
To create a new instance of this class, use KinematicConfigurator.createCollisionPairBuilder() Created in NX6.0.0 NX_REMOVE_FROM_JAVA_API |
interface |
ConvertFromMCDBuilder
Represents a
ConvertFromMCDBuilder To create a new instance of this class, use KinematicConfigurator.createConvertFromMcdBuilder() Created in NX9.0.0 |
interface |
CustomLoops
Deprecated.
Deprecated in NX9.0.0. Use
PatchOpeningsBuilder instead.
|
interface |
CustomLoopSet
Deprecated.
Deprecated in NX9.0.0. Use
PatchOpeningsBuilder instead.
|
interface |
CutDepthChecker
Represents a cut depth checker object
This has not creator . |
interface |
CylinderMillingBuilder
Represents a CylinderMillingBuilder Builder
To create a new instance of this class, use OperationCollection.createCylinderMillingBuilder(nxopen.cam.CAMObject) Created in NX8.0.0 |
interface |
CylindricalMillingBuilder
Represents a CylindricalMilling Builder
This is an abstract class and cannot be instantiated. |
interface |
DeltaMoveBuilder
Represents the Delta Move Builder
To create a new instance of this class, use MoveCollection.createDeltaMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
DPMItpBuilder
Represents an DPMItp Builder
To create a new instance of this class, use OperationCollection.createDpmitpBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
DriveChainItemBuilder
Represents the Drive Chain Item Builder
This cannot be instantiated . |
interface |
EngravingBuilder
Represents a Engraving Builder
To create a new instance of this class, use OperationCollection.createEngravingBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
FaceMillingBuilder
Represents a FaceMilling Builder
To create a new instance of this class, use OperationCollection.createFaceMillingBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
FeatureMillingBuilder
Represents a FeatureMilling Builder
To create a new instance of this class, use OperationCollection.createFeatureMillingBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
FeatureProcessBuilder
The Create Feature Process Builder class creates operations and features groups
To create a new instance of this class, use CAMSetup.createFeatureProcessBuilder() Default values. |
interface |
FeatureRecognitionBuilder
Represents a FeatureRecognition Builder
To create a new instance of this class, use CAMSetup.createFeatureRecognitionBuilder(nxopen.cam.CAMObject) Created in NX6.0.0 |
interface |
FeatureTeaching
Represents a FeatureTeaching Builder
To create a new instance of this class, use CAMSetup.createFeatureTeaching(nxopen.cam.CAMObject) Created in NX8.0.0 |
interface |
FeedsOptimizeBuilder
Represents a
FeedsOptimizeBuilder
a "commit" of this object will perform the Feed Rate Optimization. |
interface |
FinishTurningBuilder
Represents a FinishTurning Builder
To create a new instance of this class, use OperationCollection.createFinishTurningBuilder(nxopen.cam.CAMObject) Created in NX6.0.0 |
interface |
FollowCurveMoveBuilder
Represents the Follow Curve Move Builder
To create a new instance of this class, use MoveCollection.createFollowCurveMoveBuilder(nxopen.cam.Move) Default values. |
interface |
FollowGeometryMoveBuilder
Represents the Follow Geometry Move Builder
This is an abstract class, and cannot be created. |
interface |
FollowPartMoveBuilder
Represents the Follow Part Move Builder
To create a new instance of this class, use MoveCollection.createFollowPartMoveBuilder(nxopen.cam.Move) Default values. |
interface |
GeneralPropertiesBuilder
Represents a
GeneralPropertiesBuilder to be used for setting the name
of a specified CAM object. |
interface |
GenericTrackingBuilder
Represents a GenericTracking Builder
To create a new instance of this class, use Tool.createGenericTrackingBuilder(nxopen.cam.SolidTrackPoint) Created in NX5.0.0 |
interface |
Geometry
Represents a CAM geometry object .
|
interface |
GmcOpBuilder
Represents a GmcOp Builder
To create a new instance of this class, use OperationCollection.createGmcopBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
GrooveMillingBuilder
Represents a GrooveMillingBuilder
To create a new instance of this class, use OperationCollection.createGrooveMillingBuilder(nxopen.cam.CAMObject) Created in NX9.0.0 |
interface |
GroupFeatures
Represents the group features command
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createGroupFeatures Default values. |
interface |
HoldingSystemBuilder
Represents a
HoldingSystemBuilder
This is an abstract class, and cannot be instantiated. |
interface |
HoleDrillingBuilder
Represents a HoleDrillingBuilder Builder
To create a new instance of this class, use OperationCollection.createHoleDrillingBuilder(nxopen.cam.CAMObject) Created in NX9.0.0 |
interface |
HoleMachiningBuilder
Represents a HoleMachiningBuilder Builder
This is an abstract class and cannot be instantiated. |
interface |
HoleMakingBuilder
Represents a HoleMaking Builder
To create a new instance of this class, use OperationCollection.createHoleMakingBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
InspectionAlignmentBuilder
Represents a CMM Inspection Alignment builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionAlignmentBuilder(nxopen.cam.CAMObject) Created in NX7.5.2 |
interface |
InspectionAnalyzeBuilder
Inspection Analyze options dialog builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionAnalyzeBuilder(nxopen.cam.CAMObject) Created in NX8.5.0 |
interface |
InspectionAnalyzeOutputBuilder
Inspection Analyze Output options dialog builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionAnalyzeOutputBuilder(nxopen.cam.CAMObject) Created in NX8.5.1 |
interface |
InspectionCmmCommandBuilder
Represents a CMM Inspection miscellaneous command builder.
|
interface |
InspectionCollisionAvoidanceBuilder
Collision Avoidance Dialog builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionCollisionAvoidanceBuilder(nxopen.cam.CAMObject) Created in NX8.0.0 |
interface |
InspectionCreatePathsBuilder
Create Paths Dialog builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionCreatePathsBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
interface |
InspectionDeleteMeaPtsBuilder
Inspection Delete Analyze Points dialog builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionDeleteMeaPtsBuilderSel(nxopen.cam.CAMObject[]) Created in NX9.0.1 |
interface |
InspectionDeltaMoveBuilder
Represents the builder for the CMM Inspection sub-operation Delta Move.
|
interface |
InspectionLinear5axisMoveToPointBuilder
Represents the builder for the CMM Inspection sub-operation Linear 5axis Move To Point.
|
interface |
InspectionLinearMoveToPointBuilder
Represents the builder for the CMM Inspection sub-operation Linear Move To Point.
|
interface |
InspectionLinkPmiBuilder
Create Link PMI Dialog Builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionLinkPmiBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
interface |
InspectionMeasDataBuilder
Inspection Measured Data dialog builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionMeasDataBuilder(nxopen.cam.CAMObject) Created in NX8.5.0 |
interface |
InspectionMeasurePointBuilder
Represents the builder for the CMM Inspection sub-operation Measure Point.
|
interface |
InspectionMoveBuilder
Represents CMM Inspection Move Builder
This cannot be instantiated . |
interface |
InspectionOperationTransformBuilder
Create transformed inspection operations,
this builder's Commit can produce more than one object,
the GetCommittedObjects can be used to get the objects
and the order of GetCommittedObject's output array is not stable.
|
interface |
InspectionOutputOperationBuilder
this class creates the output operation
To create a new instance of this class, use InspectionOperationCollection.createInspectionOutputOperationBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
interface |
InspectionPathBuilder
Represents the builder for a CMM Inspection path.
|
interface |
InspectionProbeTrackingBuilder
Represents a InspectionProbeTracking builder
To create a new instance of this class, use InspectionTool.createInspectionProbeTrackingBuilder(nxopen.cam.ProbeTrackPoint) Created in NX9.0.0 |
interface |
InspectionSaveToLayerBuilder
Inspection Analyze Save to Layer dialog builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionSaveToLayerBuilderSel(nxopen.cam.CAMObject[]) Created in NX9.0.1 |
interface |
InspectionScanArcBuilder
Represents the builder for the CMM Inspection sub-operation Scan Arc.
|
interface |
InspectionScanCurve5AxisBuilder
Represents the builder for the CMM Inspection sub-operation Scan Curve.
|
interface |
InspectionScanCurveBuilder
Represents the builder for the CMM Inspection sub-operation Scan Curve.
|
interface |
InspectionScanHelixBuilder
Represents the builder for the CMM Inspection sub-operation Scan Helix.
|
interface |
InspectionScanLineBuilder
Represents the builder for the CMM Inspection sub-operation Scan Line.
|
interface |
InspectionSensorBuilder
Represents the builder for a CMM Inspection Sensor.
|
interface |
InspectionSensorMassEditBuilder
Edit Multiple Subops Dialog builder
To create a new instance of this class, use InspectionMoveCollection.createInspectionSensorMassEditBuilder(nxopen.cam.InspectionMoveSubop) Created in NX7.5.3 |
interface |
InspectionToleranceOperationBuilder
this class creates the tolerance operation
To create a new instance of this class, use InspectionOperationCollection.createInspectionToleranceOperationBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
interface |
InspectionUVGridBuilder
Represents the builder for the CMM Inspection UV Grid sub-operation.
|
interface |
IpwAnalysisBuilder
Represents a
IpwAnalysisBuilder
This is an abstract class, and cannot be instantiated. |
interface |
IpwContainmentCurvesBuilder
Represents a
IpwContainmentCurvesBuilder
This is an abstract class, and cannot be instantiated. |
interface |
LaserCircleCutout
Represents a LaserCircleCutout
To create a new instance of this class, use MoveCollection.createLaserCircleCutout(nxopen.cam.Move) Created in NX9.0.0 |
interface |
LaserHexagonCutout
Represents a LaserHexagonCutout
To create a new instance of this class, use MoveCollection.createLaserHexagonCutout(nxopen.cam.Move) Created in NX9.0.0 |
interface |
LaserLinearMove
Represents a LaserLinearMove
To create a new instance of this class, use MoveCollection.createLaserLinearMove(nxopen.cam.Move) Created in NX9.0.0 |
interface |
LaserProfileMove
Represents a LaserProfileMove
To create a new instance of this class, use MoveCollection.createLaserProfileMove(nxopen.cam.Move) Created in NX9.0.0 |
interface |
LaserRectangleCutout
Represents a LaserRectangleCutout
To create a new instance of this class, use MoveCollection.createLaserRectangleCutout(nxopen.cam.Move) Created in NX9.0.0 |
interface |
LaserSlotCutout
Represents a LaserSlotCutout
To create a new instance of this class, use MoveCollection.createLaserSlotCutout(nxopen.cam.Move) Created in NX9.0.0 |
interface |
LaserTeachMode
Represents a Laser TeachMode
To create a new instance of this class, use OperationCollection.createLaserTeachMode(nxopen.cam.CAMObject) Created in NX9.0.0 |
interface |
LatheMachineControlBuilder
Represents a LatheMachineControl Builder
To create a new instance of this class, use OperationCollection.createLatheMachineControlBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
LatheUserDefinedBuilder
Represents a LatheUserDefined Builder
To create a new instance of this class, use OperationCollection.createLatheUserDefinedBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
ManageToolPartBuilder
Represents an Export Tool Part Builder
This is an abstract class, and cannot be instantiated. |
interface |
MillMachineControlBuilder
Represents a MillMachineControl Builder
To create a new instance of this class, use OperationCollection.createMillMachineControlBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
MillOperationBuilder
Represents a MillOperation Builder
This is an abstract class and cannot be instantiated. |
interface |
MillToolProbingBuilder
Represents a Mill Tool Probing Builder
To create a new instance of this class, use OperationCollection.createMillToolProbingBuilder(nxopen.cam.CAMObject) Created in NX8.5.1 |
interface |
MillUserDefinedBuilder
Represents a MillUserDefined Builder
To create a new instance of this class, use OperationCollection.createMillUserDefinedBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
MoveBuilder
Represents Move Builder
This cannot be instantiated . |
interface |
MoveToPointBuilder
Represents the Move To Point Builder
To create a new instance of this class, use MoveCollection.createMoveToPointBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
MultipleStepoverBuilder
Represents a Builder which holds the data for a set of individual number of passes and
stepover distance.
|
interface |
NCAssistantBuilder
Represents a NCAssistant Builder
To create a new instance of this class, use CAMSetup.createNCAssistantBuilder() Default values. |
interface |
NcmctPartMountingBuilder
Represents a
NcmctPartMountingBuilder
a "commit" of this object will perform the Part Mounting and no object is returned. |
interface |
NormalToToolAxisMoveBuilder
Represents the Move To Point Builder
To create a new instance of this class, use MoveCollection.createNormalToToolAxisMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
ObjectNotes
Represents an Object Notes
To create a new instance of this class, use CAMSetup.createObjectNotes(nxopen.cam.CAMObject) Created in NX9.0.0 |
interface |
ObjectsFeedsBuilder
Represents an Object Action Feeds Builder
To create a new instance of this class, use CAMSetup.createFeedsBuilder(nxopen.cam.CAMObject[]) Created in NX6.0.0 |
interface |
ObjectsUdeSet
Represents an Object Action Ude Set Builder
To create a new instance of this class, use CAMSetup.createObjectsUdeSet(nxopen.cam.CAMObject[], nxopen.cam.CAMSetup.Ude) Created in NX6.0.0 |
interface |
OperationBuilder
Represents a Opr Builder
This is an abstract class, and cannot be instantiated. |
interface |
OperationTeaching
Represents a OperationTeaching Builder
To create a new instance of this class, use CAMSetup.createOperationTeaching(nxopen.cam.CAMObject) Created in NX8.0.0 |
interface |
OperationTransformBuilder
OperationTransformBuilder
To create a new instance of this class, use CAMSetup.createOperationTransformBuilder(nxopen.cam.CAMObject[]) Created in NX6.0.0 |
interface |
ParamBuilder
Represents a manufacturing object builder.
|
interface |
PlanarMillingBuilder
Represents a PlanarMilling Builder
To create a new instance of this class, use OperationCollection.createPlanarMillingBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
PlanarOperationBuilder
Represents a PlanarOperation Builder
This is an abstract class and cannot be instantiated. |
interface |
PlungeMillingBuilder
Represents a PlungeMilling Builder
To create a new instance of this class, use OperationCollection.createPlungeMillingBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
PointToPointBuilder
Represents a Point to Point Builder (Drilling)
To create a new instance of this class, use OperationCollection.createPointToPointBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
Preferences
Represents a cam preferences Builder
To create a new instance of this class, use CAMSession.createCamPreferences() Created in NX7.5.0 |
interface |
PreprocessGeometryBuilder
Represents a Preprocess Geometry Builder
To create a new instance of this class, use CAMSetup.createPreprocessGeometryBuilder() Created in NX6.0.0 |
interface |
ProbeCalibrateLengthMoveBuilder
Represents the Probe Calibrate Length Move Builder
To create a new instance of this class, use MoveCollection.createProbeCalibrateLengthMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
ProbeCalibrateSphereMoveBuilder
Represents the Probe Calibrate Sphere Move Builder
To create a new instance of this class, use MoveCollection.createProbeCalibrateSphereMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
ProbeCalibrateStylusMoveBuilder
Represents the Probe Calibrate Stylus Move Builder
To create a new instance of this class, use MoveCollection.createProbeCalibrateStylusMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
ProbeClearanceMoveBuilder
Represents the Probe Clearance Move Builder
To create a new instance of this class, use MoveCollection.createProbeClearanceMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
ProbeInspectBorebossMoveBuilder
Represents the Probe Inspect Bore Boss Move Builder
To create a new instance of this class, use MoveCollection.createProbeInspectBorebossMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
ProbeInspectPointMoveBuilder
Represents the Probe Inspect Point Move Builder
To create a new instance of this class, use MoveCollection.createProbeInspectPointMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
ProbeInspectSurfacePointMoveBuilder
Represents the Probe Inspect Surface Point Move Builder
To create a new instance of this class, use MoveCollection.createProbeInspectSurfacePointMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
ProbeTrackingBuilder
Represents a ProbeTracking Builder
To create a new instance of this class, use Tool.createProbeTrackingBuilder(nxopen.cam.ProbeTrackPoint) Created in NX5.0.0 |
interface |
RotaryPointMoveBuilder
represents the Rotary Move To Point Builder
To create a new instance of this class, use MoveCollection.createRotaryPointMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
RotaryPolarMoveBuilder
Represents the Rotary Polar Builder
To create a new instance of this class, use MoveCollection.createRotaryPolarMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
RotateToolMoveBuilder
Represents the Rotate Tool Move Builder
To create a new instance of this class, use MoveCollection.createRotateToolMoveBuilder(nxopen.cam.Move, nxopen.cam.Move) Created in NX5.0.0 |
interface |
RoughFinishTurningBuilder
Represents a RoughFinishTurning Builder
This is an abstract class and cannot be instantiated. |
interface |
RoughTurningBuilder
Represents a RoughTurning Builder
To create a new instance of this class, use OperationCollection.createRoughTurningBuilder(nxopen.cam.CAMObject) Created in NX6.0.0 |
interface |
SelectCAMFeatureList
Represents a list of objects on a selection list.
|
interface |
SimulationOptionsBuilder
Represents a
SimulationOptionsBuilder
To create a new instance of this class, use KinematicConfigurator.createSimulationOptionsBuilder(nxopen.cam.SimulationOptionsBuilder.DialogType) Created in NX6.0.0 NX_REMOVE_FROM_JAVA_API |
interface |
SolidTrackingBuilder
Represents a SolidTracking Builder
To create a new instance of this class, use Tool.createSolidTrackingBuilder(nxopen.cam.SolidTrackPoint) Created in NX5.0.0 |
interface |
SpunOutlineGeom
Represents a spun outline geometry object for turning boundary .
|
interface |
StockPerPassBuilder
Represents a Builder which holds the data for a set of individual stock per pass.
|
interface |
SurfaceContourBuilder
Represents a SurfaceContour Builder
To create a new instance of this class, use OperationCollection.createSurfaceContourBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
SurfaceDriveGeometry
Represents a CAM drive geometry object for surface area .
|
interface |
TeachmodeEngageSettingsBuilder
Represents a TeachmodeEngageSettingsBuilder
To create a new instance of this class, use OperationCollection.createTeachmodeTurningBuilder(nxopen.cam.CAMObject) Created in NX7.5.0 |
interface |
TeachmodeLinearMoveBuilder
Represents a TeachmodeLinearMove
To create a new instance of this class, use OperationCollection.createTeachmodeTurningBuilder(nxopen.cam.CAMObject) Created in NX7.5.0 |
interface |
TeachmodeProfileMoveBuilder
Represents a TeachmodeProfileMoveBuilder
To create a new instance of this class, use OperationCollection.createTeachmodeTurningBuilder(nxopen.cam.CAMObject) Created in NX7.5.0 |
interface |
TeachmodeRetractSettingsBuilder
Represents a TeachmodeRetractSettings builder
To create a new instance of this class, use OperationCollection.createTeachmodeTurningBuilder(nxopen.cam.CAMObject) Created in NX7.5.0 |
interface |
TeachmodeTurningBuilder
Represents a TeachmodeTurningBuilder
To create a new instance of this class, use OperationCollection.createTeachmodeTurningBuilder(nxopen.cam.CAMObject) Created in NX7.5.0 |
interface |
ThreadMillingBuilder
Represents a ThreadMilling Builder
To create a new instance of this class, use OperationCollection.createThreadMillingBuilder(nxopen.cam.CAMObject) Created in NX7.5.0 |
interface |
ThreadTurningBuilder
Represents a ThreadTurning Builder
To create a new instance of this class, use OperationCollection.createThreadTurningBuilder(nxopen.cam.CAMObject) Created in NX6.0.0 |
interface |
ToolPathDivideBuilder
Represents a Tool Path Divide Builder
To create a new instance of this class, use CAMSetup.createToolPathDivideBuilder(nxopen.cam.CAMObject[]) Created in NX5.0.0 |
interface |
ToolPathEditorBuilder
Represents a Tool Path Editor Builder
To create a new instance of this class, use Operation.createToolPathEditorBuilder() Default values. |
interface |
ToolPathSplitBuilder
Represents a Tool Path Split Builder
To create a new instance of this class, use CAMSetup.createToolPathSplitBuilder(nxopen.cam.CAMObject[]) Created in NX6.0.0 |
interface |
ToolPathSplitItemBuilder
Represents a ToolPathSplitItem builder
Use the ToolPathSplitBuilder class to create a ToolPathSplitItemBuilder object. |
interface |
ToolPathSplitParametersBuilder
Represents the Divide Parameters
This object is owned by another builder. |
interface |
ToolPathTiltAvoidance
Represents a Tool Path Tilt Avoidance Builder
This is a sub-builder class and cannot be directly instantiated . |
interface |
ToolPathTiltBuilder
Represents a Tool Path Tilt Builder
To create a new instance of this class, use CAMSetup.createToolPathTiltBuilder(nxopen.cam.CAMObject[]) Created in NX7.5.2 |
interface |
ToolPathTiltClearance
Represents a Tool Path Tilt Clearance Builder
This is a sub-builder class and cannot be directly instantiated . |
interface |
ToolPathTiltMachine
Represents a Tool Path Tilt Machine Builder
This is a sub-builder class and cannot be directly instantiated . |
interface |
ToolPathTiltTilting
Represents a Tool Path Tilt Tilting Builder
This is a sub-builder class and cannot be directly instantiated . |
interface |
ToolTrackingPointBuilder
Represents the Tool Tracking Point Builder
To create a new instance of this class, use MoveCollection.createToolTrackingPointBuilder(nxopen.cam.Move) Created in NX8.5.1 |
interface |
Topology
Represents a CAM topology builder
Use the Geometry class to get a topology builder Created in NX8.0.0 |
interface |
TrackpointBuilder
Represents a Trackpoint Builder
This is an abstract class and can not be instantiated . |
interface |
TurningOperationBuilder
Represents a Turning Operation Builder
This is an abstract class and cannot be instantiated. |
interface |
TurnMoveToPointBuilder
Represents the Move To Point Builder
To create a new instance of this class, use MoveCollection.createTurnMoveToPointBuilder(nxopen.cam.Move) Created in NX8.5.1 |
interface |
TurnPartProbingBuilder
Represents a Turn Part Probing Builder
To create a new instance of this class, use OperationCollection.createTurnPartProbingBuilder(nxopen.cam.CAMObject) Created in NX8.5.1 |
interface |
TurnProbeClearanceBuilder
Represents an probe start of engage Builder
To create a new instance of this class, use MoveCollection.createTurnProbeClearanceBuilder(nxopen.cam.Move) Created in NX8.5.1 |
interface |
TurnProbeInspectPointMoveBuilder
Represents the Turn Probe Inspect Point Move Builder
To create a new instance of this class, use MoveCollection.createTurnProbeInspectPointMoveBuilder(nxopen.cam.Move) Created in NX8.5.1 |
interface |
TurnToolProbingBuilder
Represents a Turn tool probing Builder
To create a new instance of this class, use OperationCollection.createTurnToolProbingBuilder(nxopen.cam.CAMObject) Created in NX8.5.1 |
interface |
UdeMoveBuilder
Represents the Ude Move Builder
To create a new instance of this class, use MoveCollection.createUdeMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
UserDefinedMoveBuilder
Represents the User Defined Move Builder
To create a new instance of this class, use MoveCollection.createUserDefinedMoveBuilder(nxopen.cam.Move, java.lang.String) Created in NX8.0.0 |
interface |
UserDefinedOprBuilder
Represents a UserDefinedOpr Builder
This is an abstract class, and cannot be instantiated. |
interface |
VazlMillingBuilder
Represents a VazlMilling Builder
To create a new instance of this class, use OperationCollection.createVazlMillingBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
VectorDistanceMoveBuilder
Represents the Vector Distance Move Builder
To create a new instance of this class, use MoveCollection.createVectorDistanceMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
VolumeBased25DMillingOperationBuilder
Represents a VolumeBased25DMillingOperation Builder
To create a new instance of this class, use OperationCollection.createVolumeBased25dMillingOperationBuilder(nxopen.cam.CAMObject) Created in NX8.5.0 |
interface |
WedmBasedGeomBuilder
Represents a WedmBasedGeom Builder
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createWedmBasedGeomBuilder Created in NX5.0.0 |
interface |
WedmCornerControlBuilder
Represents a WedmCornerControl Builder
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createWedmCornerControlBuilder Created in NX6.0.0 |
interface |
WedmCustomBoundaryDataBuilder
Represents a WedmCustomBoundaryData Builder
No Creator . |
interface |
WedmCutOrderBuilder
Represents a
WedmCutOrderBuilder
This builder cannot be instantiated separately. |
interface |
WedmCuttingBuilder
Represents a WedmCutting Builder
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createWedmCuttingBuilder Created in NX6.0.0 |
interface |
WedmExtGeomBuilder
Represents a WedmExtGeom Builder
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createWedmExtGeomBuilder Created in NX5.0.0 |
interface |
WedmFeatureGeomBuilder
Represents a WedmFeatureGeom Builder
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createWedmFeatureGeomBuilder Created in NX5.0.0 |
interface |
WedmIntGeomBuilder
Represents a WedmIntGeom Builder
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createWedmIntGeomBuilder Created in NX5.0.0 |
interface |
WedmLeadInOutBuilder
Represents a WedmLeadInOut Builder
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createWedmLeadInOutBuilder Created in NX6.0.0 |
interface |
WedmMachineControlBuilder
Represents a WedmMachineControl Builder
To create a new instance of this class, use OperationCollection.createWedmMachineControlBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
WedmMoveControlBuilder
Represents a WedmMoveControl Builder
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createWedmMoveControlBuilder Created in NX6.0.0 |
interface |
WedmNocoreGeomBuilder
Represents a WedmNocoreGeom Builder
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createWedmNocoreGeomBuilder Created in NX5.0.0 |
interface |
WedmOpenGeomBuilder
Represents a WedmOpenGeom Builder
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createWedmOpenGeomBuilder Created in NX5.0.0 |
interface |
WedmOperationBuilder
Represents a WedmOperation Builder
To create a new instance of this class, use OperationCollection.createWedmOperationBuilder(nxopen.cam.CAMObject) Created in NX7.5.0 |
interface |
WedmPointDefinitionBuilder
Represents a
WedmPointDefinitionBuilder
This builder cannot be instantiated separately. |
interface |
WedmUserDefinedBuilder
Represents a WedmUserDefined Builder
To create a new instance of this class, use OperationCollection.createWedmUserDefinedBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
ZLevelMillingBuilder
Represents a ZLevelMilling Builder
To create a new instance of this class, use OperationCollection.createZlevelMillingBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
Modifier and Type | Interface and Description |
---|---|
interface |
FeatureGeometry
Represents a feature geometry builder
This is an abstract class and cannot be instantiated. |
interface |
MachiningFeatureGeometry
Represents a feature geometry builder
An instance of this class can be obtained from CAM.HoleBossGeom#getCenterHoleGeometry or CAM.HoleBossGeom#getChamferHoleGeometry Created in NX9.0.0 |
interface |
ThreadFeatureGeometry
Represents a feature geometry builder
This is an abstract class and cannot be instantiated. |
Modifier and Type | Interface and Description |
---|---|
interface |
AddendumSectionUserDefinedBuilder
Represents a
AddendumSectionUserDefinedBuilder builder used to select a previously
defined section or a string of objects to define the section shape. |
interface |
DieAttributesBuilder
Represents a
DieAttributesBuilder . |
interface |
DieBooleanBuilder
Represents a
DieBooleanBuilder . |
interface |
DieDirectionBuilder
Represents a
DieDirectionBuilder . |
interface |
DieLimitsBuilder
Limits a path to a segment of the path.
|
interface |
DieLocationsBuilder
Represents a
DieLocationsBuilder . |
interface |
DiePlaneBuilder
Represents a
DiePlaneBuilder . |
interface |
DrawBeadSegmentBuilder
Segment builder for Die Engineering draw bead.
|
interface |
DrawBeadTaperBuilder
Taper definition for the end of the Die Engineering Draw Bead.
|
interface |
UncutRegionsBuilder
Calculates the uncut regions of a curve given a radius value for the cut tool.
|
Modifier and Type | Interface and Description |
---|---|
interface |
Background
Represents a
Background
Background defines how background pixels are displayed. |
interface |
BoundedGridBuilder
Represents the builder for creating a bounded grid
BoundedGrid . |
interface |
CameraBuilder
Represents a
CameraBuilder
Cameras are not supported in KF. |
interface |
CgfxAttributeValueColor3Builder
Deprecated.
Deprecated in NX10.0.0. No alternative provided for this class.
|
interface |
CgfxAttributeValueColor4Builder
Deprecated.
Deprecated in NX10.0.0. No alternative provided for this class.
|
interface |
CgfxAttributeValueFileBuilder
Deprecated.
Deprecated in NX10.0.0. No alternative provided for this class.
|
interface |
CgfxAttributeValueFloat3Builder
Deprecated.
Deprecated in NX10.0.0. No alternative provided for this class.
|
interface |
CgfxAttributeValueFloat4Builder
Deprecated.
Deprecated in NX10.0.0. No alternative provided for this class.
|
interface |
CgfxAttributeValueIntegerBuilder
Deprecated.
Deprecated in NX10.0.0. No alternative provided for this class.
|
interface |
CgfxAttributeValueNumberBuilder
Deprecated.
Deprecated in NX10.0.0. No alternative provided for this class.
|
interface |
CgfxMattexBuilder
Deprecated.
Deprecated in NX10.0.0. No alternative provided for this class.
|
interface |
DatumPlaneGridBuilder
Represents the builder for adding a datum plane grid
DatumPlaneGrid
to a datum plane. |
interface |
DecalBuilder
Represents a
DecalBuilder
This class is restricted to being called from a program running during an Interactive NX session. |
interface |
DynamicSectionBuilder
Represents a Dynamic Section Builder used for creating sections.
|
interface |
ExtractScene
Represents a
ExtractScene
This class is restricted to being called from a program running during an Interactive NX session. |
interface |
FacetSettingsBuilder
Represents a
FacetSettingsBuilder
Facet Settings are not supported in KF. |
interface |
GlobalIlluminationBuilder
Represents a
GlobalIlluminationBuilder . |
interface |
GridBuilder
Represents the builder for adding a grid
Grid
This is an abstract class, and cannot be instantiated. |
interface |
Image
Represents a
Image
This class is restricted to being called from a program running during an Interactive NX session. |
interface |
ImageBaseBuilder
Represents a
ImageBaseBuilder . |
interface |
ImageBasedLighting
Represents a
ImageBasedLighting
Image-based Lighting (IBL) is only performed in High Quality Image
renderings. |
interface |
LayerSettingsBuilder
Represents a builder for object layer settings.
|
interface |
LightBuilder
Represents a
LightBuilder
This class is restricted to being called from a program running during an Interactive NX session. |
interface |
Lighting
Represents a
Lighting
Lights are used to illuminate the scene in Shaded and Studio rendering
styles, as well as in High Quality Images. |
interface |
NonProportionalZoom
Provides non-proportional zoom capability
To create a new instance of this class, use ViewCollection.createNonProportionalZoom() Default values. |
interface |
PerspectiveOptionsBuilder
Represents a
PerspectiveOptionsBuilder
Cameras are not supported in KF. |
interface |
PlanarShipGridBuilder
Represents a
PlanarShipGrid builder. |
interface |
PlaneGridBuilder
Represents the builder for adding a bounded grid
PlaneGrid
to a plane. |
interface |
RasterImageBuilder
Represents a
RasterImageBuilder . |
interface |
RayTracedStudioBuilder
Represents a
RayTracedStudioBuilder . |
interface |
RayTracedStudioEditorBuilder
Represents a
RayTracedStudioEditorBuilder . |
interface |
Reflection
Represents a
Reflection
Reflection defines the source of reflection in shiny objects for Studio
rendering style or High Quality Images. |
interface |
SaveImageFileBrowserBuilder
Represents a
SaveImageFileBrowserBuilder . |
interface |
Scene
Represents a
Scene
A scene is comprised of background, stage, reflection, lights and
image-based lighting subobjects. |
interface |
SectionCurveSettingsBuilder
|
interface |
SelPref
Represents a
SelPref
To obtain a instance of this class use Display.SelPrefCollection#createSelPref Created in NX5.0.0 |
interface |
Shadows
Represents a
Shadows
This class is restricted to being called from a program running during an Interactive NX session. |
interface |
Stage
Represents a
Stage
A stage is an environment cube, a six-sided room, that can have between
one and six visible walls. |
interface |
StudioImageCaptureBuilder
Represents a
StudioImageCaptureBuilder
This class is restricted to being called from a program running during an Interactive NX session. |
interface |
TrueShadingBuilder
Represents a
TrueShading builder To create a new instance of this class, use TrueShadingCollection.createTrueShadingBuilder(nxopen.display.TrueShading) Created in NX6.0.0 |
interface |
TrueStudioBuilder
The TrueStudioBuillder manages Advanced Studio visualization display
To create a new instance of this class, use TrueStudioCollection.createTrueStudioBuilder(nxopen.display.TrueStudio) Created in NX8.0.0 |
interface |
Wall
Represents a
Wall
This class is restricted to being called from a program running during an Interactive NX session. |
Modifier and Type | Interface and Description |
---|---|
interface |
AnnotateViewsBuilder
This class is used to annotate views based on the knowledge fusion rules.
|
interface |
AttributeItemBuilder
Represents a
AttributeItemBuilder . |
interface |
AutomationPreferencesBuilder
the builder for Drafting Automation Preferences
To create a new instance of this class, use AutomationManager.createPreferencesBuilder() Created in NX8.0.0 |
interface |
AutomationRuleBuilder
|
interface |
BaseEditSettingsBuilder
Represents a
BaseEditSettingsBuilder . |
interface |
CutCopyPasteBuilder
Represents a paste in Drafting.
|
interface |
CutCopyPasteLeaderBuilder
Represents a Drafting Paste, especially when reassociating a leader on paste.
|
interface |
DistributeAnnotationsBuilder
This class is used to distribute annotations associated to a view.
|
interface |
DrawingCreationWizardBuilder
Represents a
DrawingCreationWizardBuilder . |
interface |
MoveToDrawingViewBuilder
This builder allows the user to extract contents from a sheet and transfer them to a new Drawing
view, also provide some other options for view creation
To create a new instance of this class, use DraftingApplicationManager.createMoveToDrawingViewBuilder() Default values. |
interface |
PreferencesBuilder
Represents a
PreferencesBuilder builder To create a new instance of this class, use SettingsManager.createPreferencesBuilder() Default values. |
interface |
PrimaryContentItemBuilder
Represents a
PrimaryContentItemBuilder . |
interface |
RulesBuilder
This class is used to specify knowledge fusion rules in a drawing template.
|
interface |
SmashDrawingViewBuilder
This builder allows the user to break a Drawing View into its parts and delete the Drawing View
To create a new instance of this class, use DraftingApplicationManager.createSmashDrawingViewBuilder() Created in NX8.5.0 |
interface |
SpecifyRuleBuilder
This class is used to specify knowledge fusion rule for a note object in a drawing template.
|
Modifier and Type | Interface and Description |
---|---|
interface |
AddObjectsToRegionBuilder
Creates the builder for associating the symbols from library to the region
To create a new instance of this class, use DrawingRegionCollection.createAddObjectsToRegionBuilder() Created in NX8.0.0 |
interface |
AddRemoveBoxViewBuilder
This class is used to construct the add remove box view Builder
To create a new instance of this class, use DraftingViewCollection.createAddRemoveBoxViewBuilder(nxopen.drawings.DraftingView) Created in NX8.0.0 |
interface |
AutomationBookletBuilder
|
interface |
AutomationTemplateRegionBuilder
|
interface |
BaseViewBuilder
Represents a
BaseView builder To create a new instance of this class, use DraftingViewCollection.createBaseViewBuilder(nxopen.drawings.BaseView) Default values. |
interface |
BorderAndZoneStyleBuilder
Represents the Border and Zone Style Builder which manages all the style attributes related
to sheet borders, sheet margins and sheet zones.
|
interface |
BordersAndZonesBuilder
Builder for creating Borders and Zones.
|
interface |
BrokenViewBuilder
This class is used to construct the broken view Builder
To create a new instance of this class, use DraftingViewCollection.createBrokenViewBuilder(nxopen.drawings.ViewBreak) Default values. |
interface |
CustomViewSettingsBuilder
this class represents the "this class represents Drawings.CustomViewSettingsBuilder..
|
interface |
DetailViewBuilder
Represents a
DetailView . |
interface |
DrawingCompareSettingsBuilder
Represents a
DrawingCompareSettingsBuilder builder To create a new instance of this class, use DrawingCompareManager.createDrawingCompareSettingsBuilder() Default values. |
interface |
DrawingRegionBuilder
Represents a Drawing Region Builder
To create a new instance of this class, use DrawingRegionCollection.createDrawingRegionBuilder(nxopen.drawings.DrawingRegion) Default values. |
interface |
DrawingRegionRulesBuilder
Represents a Drawing region rules builder .
|
interface |
DrawingViewBuilder
This builder allows the user to create a Drawing View
To create a new instance of this class, use DraftingViewCollection.createDrawingViewBuilder(nxopen.drawings.DrawingView) Default values. |
interface |
EditSectionLineSettingsBuilder
Represents a
EditSectionLineSettingsBuilder builder. |
interface |
EditViewLabelSettingsBuilder
Represents a
EditViewLabelSettingsBuilder builder. |
interface |
EditViewSettingsBuilder
Represents a
EditViewSettingsBuilder builder. |
interface |
GeneralWorkFlowBuilder
|
interface |
HalfSectionLineBuilder
Deprecated.
Deprecated in NX10.0.0. Use
Drawings.SectionViewBuilder#sectionViewType instead.
|
interface |
HiddenObjectsBuilder
This builder allows the user to select a view in which
component objects can be designated as hidden or shown .
|
interface |
HingeLineBuilder
Represents a Drawings.HingeLineBuilder.
|
interface |
MarkAsTemplateBuilder
Represents a
MarkAsTemplateBuilder
To create a new instance of this class, use nxopen.draftingManager#createMarkAsTemplateBuilder Created in NX8.0.0 |
interface |
MultipleViewPlacementBuilder
This builder allows the user to create a Multiple View Placement .
|
interface |
OrientedSectionLineBuilder
Deprecated.
Deprecated in NX10.0.0. This API is not supported yet and should not be used.
|
interface |
OvtBuilder
|
interface |
ParentViewBuilder
Represents a
ParentViewBuilder . |
interface |
PointAndAngleSectionLineBuilder
Deprecated.
Deprecated in NX10.0.0. This API is not supported yet and should not be used.
|
interface |
PointToPointSectionLineBuilder
Deprecated.
Deprecated in NX10.0.0. Use
Drawings.SectionViewBuilder#sectionViewType instead.
|
interface |
ProjectedViewBuilder
Represents a
ProjectedView builder To create a new instance of this class, use DraftingViewCollection.createProjectedViewBuilder(nxopen.drawings.ProjectedView) Default values. |
interface |
ProjectedViewOrientationBuilder
|
interface |
RefineDisplayBuilder
Represents a
RefineDisplayBuilder . |
interface |
RemoveObjectsBuilder
Creates the builder for removing associated objects from the region
To create a new instance of this class, use DrawingRegionCollection.createRemoveObjectsBuilder() Created in NX8.0.0 |
interface |
RevolvedSectionLineBuilder
Deprecated.
Deprecated in NX10.0.0. Use
Drawings.SectionViewBuilder#sectionViewType instead.
|
interface |
SectionInViewBuilder
This builder allows the user to select a view in which component or
solid body objects can be designated as section, non-sectioned, or neither
To create a new instance of this class, use DraftingViewCollection.createSectionInViewBuilder() Default values. |
interface |
SectionLineBuilder
Deprecated.
Deprecated in NX10.0.0. Use
nxopen.drawings.SectionViewBuilder#sectionLineType
|
interface |
SectionLineSegmentBuilder
Represents a
SectionLineSegmentBuilder . |
interface |
SectionLineSettingsBuilder
Represents the Section Line Settings Builder (Drawings.SectionLineSettingsBuilder) which manages all the style attributes related
to the section Line including label letter.
|
interface |
SectionLineStyleBuilder
Represents a Drawings.SectionLineStyleBuiler.
|
interface |
SectionViewBuilder
Represents a
SectionView builder To create a new instance of this class, use DraftingViewCollection.createSectionViewBuilder(nxopen.NXObject) Default values. |
interface |
SelectDraftingView
Represents a single object selection.
|
interface |
SelectDraftingViewList
Represents a list of objects on a selection list.
|
interface |
SelectDrawingRegion
Represents a single object selection.
|
interface |
SelectDrawingView
Represents a single object selection.
|
interface |
SelectDrawingViewList
Represents a list of objects on a selection list.
|
interface |
SelectModelViewBuilder
Represents a Select Model View builder that selects a model view
.
|
interface |
SelectRegionBuilder
Creates the builder for associating the objects from the screen
To create a new instance of this class, use DrawingRegionCollection.createSelectRegionBuilder() Created in NX8.0.0 |
interface |
SelectSectionLine
Represents a single object selection.
|
interface |
SheetBorderSettingsBuilder
Represents a
SheetBorderSettingsBuilder . |
interface |
SheetMarginSettingsBuilder
Represents the Drawing Sheet Margins Style Builder.
|
interface |
SheetZoneReferenceBuilder
builder for creating sheet zone refernce control strings based on the selected attribute and view
To create a new instance of this class, use nxopen.draftingManager#createSheetZoneReferenceBuilder Created in NX8.0.0 |
interface |
SheetZoneSettingsBuilder
Represents the Drawing Sheet Zone Setting Style Builder.
|
interface |
ShipDraftingViewLinesBuilder
Represents a ship view lines block
To create a new instance of this class, use DraftingViewCollection.createShipDraftingViewLinesBuilder() Created in NX10.0.0 |
interface |
SketchSectionLineBuilder
Represents a
Drawings.SectionLine builder To create a new instance of this class, use SectionLineCollection.createSketchSectionLineBuilder(nxopen.drawings.SectionLine) Default values. |
interface |
SpecifySectionLineBuilder
Select a section line .
|
interface |
StandardViewsBuilder
This builder allows the user to create a Drawing View
To create a new instance of this class, use DraftingViewCollection.createStandardViewsBuilder() Default values. |
interface |
SteppedSectionLineBuilder
Deprecated.
Deprecated in NX10.0.0. Use
Drawings.SectionViewBuilder#sectionViewType instead.
|
interface |
SvtBuilder
|
interface |
UpdateViewsBuilder
Represents a
UpdateViewsBuilder
To create a new instance of this class, use DraftingViewCollection.createUpdateViewsBuilder() Created in NX5.0.0 |
interface |
View2dOrientBuilder
Represents the View 2D Orientation (Drawings.View2dOrientBuilder)
Created in NX6.0.0 |
interface |
ViewAlignmentBuilder
Represents a
ViewAlignmentBuilder .This class is used to construct the view alignment Builder To create a new instance of this class, use ViewAlignmentCollection.createViewAlignmentBuilder() Default values. |
interface |
ViewBoundaryBuilder
Represents the View Boundary (Drawings.ViewBoundaryBuilder)
Created in NX6.0.0 |
interface |
ViewBreakBuilder
Represents a
ViewBreakBuilder This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0 |
interface |
ViewCommonViewLabelBuilder
|
interface |
ViewCopyTo3dBuilder
Represents a
ViewCopyTo3dBuilder . |
interface |
ViewCreationWizardBuilder
This builder allows the user to create a Drawing View
To create a new instance of this class, use DraftingViewCollection.createViewCreationWizardBuilder() Default values. |
interface |
ViewDetailLabelBuilder
|
interface |
ViewLabelBuilder
|
interface |
ViewOrientationBuilder
Represents a ViewOrientationBuilder.
|
interface |
ViewPlacementBuilder
Represents a
ViewPlacementBuilder . |
interface |
ViewProjectedArrowSettingsBuilder
|
interface |
ViewProjectedLabelBuilder
|
interface |
ViewProjectedViewSettingsBuilder
|
interface |
ViewProjectionBuilder
Represents a
ViewProjectionBuilder . |
interface |
ViewProjectionPlaneBuilder
Represents the View Projection Plane (Drawings.ViewProjectionPlaneBuilder)
Created in NX6.0.2 |
interface |
ViewScaleBuilder
Represents the View Scale (Drawings.ViewScaleBuilder)
Created in NX6.0.0 |
interface |
ViewSectionLabelBuilder
|
interface |
ViewSectionLineBuilder
|
interface |
ViewStyleBaseBuilder
Represents the BASE tab on the View Style Dialog (Drawings.ViewStyleBaseBuilder)
Created in NX6.0.0 |
interface |
ViewStyleBuilder
Represents the View Style Builder (Drawings.ViewStyleBuilder) which manages all the style attributes related
to the view including base view, projected view, drawing view, detail view, broken view, section view etc.
|
interface |
ViewStyleDetailBuilder
Represents the DETAIL tab on the View Style Dialog (Drawings.ViewStyleDetailBuilder)
Created in NX6.0.0 |
interface |
ViewStyleFPCalloutConfigBuilder
Represents the Callout section of the Flat Pattern tab on the View Style Dialog (Drawings.ViewStyleFPCalloutsBuilder)
Created in NX9.0.0 |
interface |
ViewStyleFPCalloutsBuilder
Represents the Callout section of the Flat Pattern tab on the View Style Dialog (Drawings.ViewStyleFPCalloutsBuilder)
Created in NX6.0.0 |
interface |
ViewStyleFPCurvesBuilder
Represents the Curve section of the Flat Pattern tab on the View Style Dialog (Drawings.ViewStyleFPCurvesBuilder)
Created in NX6.0.0 |
interface |
ViewStyleGeneralBuilder
Represents view style general builder (Drawings.ViewStyleGeneralBuilder) which manages all the general
attributes which are necessary for all the views.
|
interface |
ViewStyleHiddenLinesBuilder
Represents the HIDDEN LINES tab on the View Style Dialog (Drawings.ViewStyleHiddenLinesBuilder)
Created in NX6.0.0 |
interface |
ViewStyleInheritPmiBuilder
Represents the INHERIT PMI tab on the View Style Dialog (Drawings.ViewStyleInheritPmiBuilder)
Created in NX6.0.0 |
interface |
ViewStyleOrientationBuilder
Represents the ORIENTATION tab on the View Style Dialog (Drawings.ViewStyleOrientationBuilder)
Created in NX6.0.0 |
interface |
ViewStylePerspectiveBuilder
Represents the PERSPECTIVE tab on the View Style Dialog (Drawings.ViewStylePerspectiveBuilder)
Created in NX6.0.0 |
interface |
ViewStyleProjectedBuilder
Represents the PROJECTED tab on the View Style Dialog (Drawings.ViewStyleProjectedBuilder)
Created in NX6.0.0 |
interface |
ViewStyleSectionBuilder
Represents the SECTION tab on the View Style Dialog (Drawings.ViewStyleSectionBuilder)
Created in NX6.0.0 |
interface |
ViewStyleSectionConstraintsBuilder
Represents the SECTION CONSTRAINTS tab on the View Style Dialog (Drawings.ViewStyleSectionConstraintsBuilder)
Created in NX6.0.0 |
interface |
ViewStyleShadingBuilder
Represents the SHADING tab on the View Style Dialog (Drawings.ViewStyleShadingBuilder)
Created in NX6.0.0 |
interface |
ViewStyleShipbuildingLinesBuilder
Represents the Shipbuilding LINES tab on the View Style Dialog (Drawings.ViewStyleShipbuildingLinesBuilder)
To create a new instance of this class, use DraftingViewCollection.createShipbuildingLineBuilder() Created in NX8.0.0 |
interface |
ViewStyleSmoothEdgesBuilder
Represents the SMOOTH EDGES tab on the View Style Dialog (Drawings.ViewStyleSmoothEdgesBuilder)
Created in NX6.0.0 |
interface |
ViewStyleThreadsBuilder
Represents the THREADS tab on the View Style Dialog (Drawings.ViewStyleThreadsBuilder)
Created in NX6.0.0 |
interface |
ViewStyleTraceLinesBuilder
Represents the TRACE LINES tab on the View Style Dialog (Drawings.ViewStyleTraceLinesBuilder)
Created in NX6.0.0 |
interface |
ViewStyleVirtualIntersectionsBuilder
Represents the VIRTUAL INTERSECTIONS tab on the View Style Dialog (Drawings.ViewStyleVirtualIntersectionsBuilder)
Created in NX6.0.0 |
interface |
ViewStyleVisibleLinesBuilder
Represents the VISIBLE LINES tab on the View Style Dialog (Drawings.ViewStyleVisibleLinesBuilder)
Created in NX6.0.0 |
interface |
ViewWorkflowBuilder
|
Modifier and Type | Interface and Description |
---|---|
interface |
BestFitAlignBuilder
This class performs the best fit alignment between objects
To create a new instance of this class, use FacetedBodyCollection.createBestFitAlignBuilder() Created in NX6.0.0 |
interface |
BridgeFacetBodyBuilder
Represents a
BridgeFacetBodyBuilder
It bridges two disjoint NX facet bodies. |
interface |
CleanupFacetBodyBuilder
Represents a
CleanupFacetBodyBuilder builder. |
interface |
CombineFacetBodyBuilder
Represents a
CombineFacetBodyBuilder builder. |
interface |
ConvertFacetBodyBuilder
Represents a
ConvertFacetBodyBuilder builder. |
interface |
CurvatureBuilder
Represents a
CurvatureBuilder . |
interface |
DecimateFacetBodyBuilder
Represents a
DecimateFacetBodyBuilder . |
interface |
DetectPrimitivesBuilder
This class manages the primitive shape detection for a facet body.
|
interface |
ExtrudeFacetBodyBuilder
Represents a
ExtrudeFacetBodyBuilder
It extrudes a NX Facet Body. |
interface |
ExtrudeProfileBuilder
Represents a
ExtrudeProfileBuilder
It extrudes 3D closed profile between planes. |
interface |
FacetBodyFromBodyBuilder
Represents a
FacetBodyFromBodyBuilder builder. |
interface |
FeatureExtractionBuilder
Represents a
FeatureExtractionBuilder
It extracts feature lines or separates regions of different curvature
from a facet body based on the curvature map. |
interface |
FillHoleBuilder
This class finds and fills holes to a prescribed boundary smoothness condition
To create a new instance of this class, use FacetedBodyCollection.createFillHoleBuilder() Default values. |
interface |
MergeFacetBodyBuilder
Represents a
MergeFacetBodyBuilder
It merges two overlapping NX facet bodies. |
interface |
MultiPatchAlignmentBuilder
Aligns multiple facet bodies to one another without using reference points.
|
interface |
PaintBrushBuilder
This class manages the paint brush utility for a facet body.
|
interface |
PaintFacetBodyBuilder
This class manages the color painting on a facet body.
|
interface |
SelectFacetedBody
Represents a single object selection.
|
interface |
SelectFacetedBodyList
Represents a list of objects on a selection list.
|
interface |
SewFacetBodyBuilder
Represents a
SewFacetBodyBuilder
It sews two touching NX facet bodies. |
interface |
SmoothFacetBodyBuilder
Represents a
SmoothFacetBodyBuilder . |
interface |
SnipFacetBodyBuilder
Represents a SnipFacetBody builder
To create a new instance of this class, use FacetedBodyCollection.createSnipFacetBodyBuilder() Default values. |
interface |
SubdivideFacetBodyBuilder
This class provides functionality to subdivide the polygons to increase the density of the facet bodies.
|
Modifier and Type | Interface and Description |
---|---|
interface |
CopyPasteBuilder
Represents a
CopyPasteBuilder
To create a new instance of this class, use FeatureCollection.createCopyPasteBuilder2(nxopen.NXObject[]) Created in NX6.0.0 |
interface |
CurveFinderBuilder
Represents a collection of curves and their relationships to other curves in the model .
|
interface |
EditDimensionBuilder
Represents a builder of edit feature dimensions
To create a new instance of this class, use FeatureCollection.createEditDimensionBuilder() Default values. |
interface |
EmbeddedOperationBuilder
Represents an EmbeddedOperationBuilder
This is an abstract class, and cannot be instantiated. |
interface |
FaceRecognitionBuilder
Represents a collection of faces and their relationships to other faces in the model .
|
interface |
FeatureReferencesBuilder
|
interface |
FeatureReplayBuilder
Represents a
FeatureReplayBuilder builder. |
interface |
GlobalShapingCurveOffsetBuilder
The class used to define the curves and offset laws needed for the target curve list.
|
interface |
GlobalShapingPointOffsetBuilder
The class used to define the points and offsets needed for the target point list.
|
interface |
GuidedExtensionBuilderEx
Represents a
GuidedExtensionEx builder
To create a new instance of this class, use FeatureCollection.createGuidedExtensionBuilderEx(Feature) Default values. |
interface |
MatchedReferenceBuilder
|
interface |
MeshTransformerBuilder
Represents a
MeshTransformer builder
To create a new instance of this class, use FeatureCollection.createMeshTransformerBuilder(Feature) Default values. |
interface |
MoveObjectBuilder
Represents a
MoveObjectBuilder To create a new instance of this class, use BaseFeatureCollection.createMoveObjectBuilder(nxopen.features.MoveObject) Default values. |
interface |
OptimizeCurveBuilder
Represents a builder of optimize curve
To create a new instance of this class, use FeatureCollection.createOptimizeCurveBuilder() Default values. |
interface |
OptimizeFaceBuilder
Represents a builder of optimize face
To create a new instance of this class, use FeatureCollection.createOptimizeFaceBuilder() Default values. |
interface |
PaintParametersBuilder
Represents a paint feature parameters builder.
|
interface |
ReferenceMapperBuilder
Represents a
ReferenceMapperBuilder
It is used in the context of Boolean Target/Tool Mapping. |
interface |
RemoveParametersBuilder
Represents a
RemoveParametersBuilder . |
interface |
SelectDatumCsysList
Represents a list of objects on a selection list.
|
interface |
SelectFeatureList
Represents a list of objects on a selection list.
|
interface |
SelectFlatPattern
Represents a single object selection.
|
interface |
SelectPartModule
Represents a single object selection.
|
interface |
ShowRelatedFacesBuilder
Represents a builder for a Show Related Faces.
|
interface |
SmoothRangeBuilder
Represents a
SmoothRangeBuilder builder
To create a new instance of this class, use FlowBlendBuilder.newSmoothRange() Created in NX10.0.0 |
interface |
TabNoteCfgBuilder
|
interface |
VariableRadiusPointsBuilder
Represents a
VariableRadiusPointsBuilder builder
To create a new instance of this class, use FlowBlendBuilder.newControlPoint() Created in NX10.0.0 |
interface |
WaveInterfaceLinkerBuilder
Represents a WaveInterfacelinker Feature builder
To create a new instance of this class, use BaseFeatureCollection.createWaveInterfaceLinkerBuilder(Feature) Default values. |
Modifier and Type | Interface and Description |
---|---|
interface |
CornerTreatmentBuilder
The CornerTreatmentBuilder class is used to manage a builder object for
a corner treatment in the flat solid and flat pattern dialogs.
|
interface |
ExportFlatPatternBuilder
Represents a Export flat pattern builder.
|
interface |
SMBoundaryConditionBuilder
Represents a Boundary condition object for Metaform.
|
Modifier and Type | Interface and Description |
---|---|
interface |
AnchorPoint
Represents a
AnchorPoint builder. |
interface |
BuiltUpBlockBuilder
|
interface |
BuiltUpManModeBuilder
This class allows you to set the NX Ship BuiltUp Profile Manufacturing Mode for
one or more components.
|
interface |
BuiltUpOffsetBuilder
Represents a
BuiltUpOffsetBuilder .This class is for splitting ship built-up solidbodies
Created in NX9.0.0 |
interface |
CompareModeBuilder
This class is used to compare between the two Shipbuilding modes of Design and Manufacturing.
|
interface |
CopyObjectsBuilder
Represents a
CopyObjectsBuilder
It is used in Ship Building Application. |
interface |
CornerCutListItemBuilder
Used to supply the list of corner cut locations and seam curves to the
CornerCutBuilder
To create a new instance of this class, use ShipCollection.createCornerCutListitemBuilder() Created in NX8.5.0 |
interface |
DisplaySolidBuilder
This class is used to identify ship structure that is to have a temporary
solid display built for it.
|
interface |
DrawingTemplateBuilder
Represents a drawing template selection block .
|
interface |
EditContextAttributesBuilder
Represents the class Features.ShipDesign.EditContextAttributesBuilder which is used to
edit the context attributes on the basic design features.
|
interface |
ExpansionDrawingBuilder
Represents a
ExpansionDrawingBuilder . |
interface |
FeaturesBatchOperationBuilder
Use this to cycle through the assembly components and perform the operation globally on the specified feature type.
|
interface |
FeaturesToTagBuilder
This class is used to add an attribute to profile features that have been modified by
the user to display a 'Metal to Metal' design 'feature'.
|
interface |
FilterBuilder
A builder that allows the user to define common properties of ship objects and then
add objects of similar properties to the select object list.
|
interface |
ManufacturingDataBuilder
This class is used to generate Manufacturing data.
|
interface |
ManufacturingStockBuilder
Represents a
ManufacturingStockBuilder builder. |
interface |
MaterialAllowanceBuilder
Represents the material allowance feature builder to examine steel feature.
|
interface |
MaterialEstimationBuilder
Represents the class Features.ShipDesign.MaterialEstimationBuilder which is used to
calculate the material estimation information.
|
interface |
MirrorShipStructureBuilder
Copy the selected parts (components) about the Mirror Plane with full model history and feature data.
|
interface |
OrientationAngleMethodsBuilder
This class defines the method of angle definition used in the definition of the region's orientation.
|
interface |
OrientationDefinitionBuilder
This class defines the top level object for use in definining the orientation
of stiffeners and edge reinforcements.
|
interface |
OrientationPointMethodsBuilder
This class is used to define the boundary of the regions when definining the orientation of a profile.
|
interface |
OrientationRegionItemBuilder
This class defines each region of the orientation.
|
interface |
PenetrationAssociationBuilder
Represents a
PenetrationAssociationBuilder builder To create a new instance of this class, use PenetrationRequestCollection.createPenetrationAssociationBuilder(boolean, nxopen.features.shipdesign.PenetrationRequest) Created in NX8.0.0 |
interface |
PenetrationCutoutBuilder
Represents a
PenetrationRequest builder To create a new instance of this class, use PenetrationRequestCollection.createPenetrationCutoutBuilder(nxopen.features.shipdesign.PenetrationRequest) Default values. |
interface |
PenetrationRequestBuilder
Represents a
PenetrationRequest builder To create a new instance of this class, use PenetrationRequestCollection.createPenetrationRequestBuilder(nxopen.features.shipdesign.PenetrationRequest) Default values. |
interface |
PenetrationRequestForCutoutBuilder
Represents a
Features.ShipDesign.PenetrationRequest builder To create a new instance of this class, use PenetrationRequestCollection.createPenetrationRequestForCutoutBuilder() Created in NX8.5.0 |
interface |
PenetrationReviewRequestBuilder
Represents a
Features.ShipDesign.PenetrationRequest builder To create a new instance of this class, use PenetrationRequestCollection.createPenetrationReviewRequestBuilder(nxopen.features.shipdesign.PenetrationRequest[]) Created in NX8.0.0 |
interface |
PlaneListBuilder
This class is used to place a plane into a list.
|
interface |
PlateStockBuilder
This builder allows you to define the stock information for plate system features in ship design.
|
interface |
QualifySketchBuilder
Represents a
QualifySketchBuilder builder. |
interface |
ReadDataSetBuilder
This class will read a data set file from Team Center .
|
interface |
RebaseBuilder
This class is used to synchronize the end cuts from the ones in mfg group to design group.
|
interface |
RemoveSplitBuilder
Represents a
RemoveSplitBuilder .This class is for removing split features. |
interface |
SectionDrawingBuilder
This builder allows you to define the section drawing information.
|
interface |
SetModeBuilder
This class is used to set the mode to design or manufacturing.
|
interface |
ShipAttributeHolder
Represents a
ShipAttributeHolder builder
This is an abstract class. |
interface |
ShipContainerBuilder
This class is used to specify the "container" part for the Ship Structures application, i.e., that
part that should have newly created Ship Stiffeners, Plates, Standard Parts added to it as assembly
components.
|
interface |
ShipCoordinatesBuilder
Represents a
ShipCoordinates builder
To create a new instance of this class, use ShipCollection.createShipCoordinatesBuilder() Default values. |
interface |
ShipDesignVersionUpBuilder
Represents a
ShipDesignVersionUpBuilder builder. |
interface |
ShipFeatureConverter
This class is used to convert/upgrade legacy Ship Design features.
|
interface |
ShipNameFieldBuilder
A field, combined with other fields, to generate a name for a Ship Basic Design Object such as a Deck.
|
interface |
ShipNamesBuilder
This class provides the mechanism for defining the names of Basic Design objects
such as Decks, Bulkheads, Stiffener Systems, etc.
|
interface |
ShipNamesListBuilder
This class provides a list of
ShipNamesBuilder objects. |
interface |
ShipTrimBodyBuilder
Represents a
ShipTrimBodyBuilder . |
interface |
SplitProfilePlateBuilder
Represents a
SplitProfilePlateBuilder .This class is for splitting ship profile/plate solidbodies
To create a new instance of this class, use ShipCollection.createSplitProfilePlateBuilder() Default values. |
interface |
SplitStandardPartBuilder
Represents a
SplitStandardPartBuilder .This class is for splitting ship standard part
To create a new instance of this class, use ShipCollection.createSplitStandardPartBuilder(nxopen.features.shipdesign.SplitStandardPart) Default values. |
interface |
StandardPartFrameworkBuilder
Represents the standard part framework builder to add or edit ship standard part.
|
interface |
StandardPartItemBuilder
Represents the ship standard part item builder.
|
interface |
SteelInsulationBoundaryBuilder
Represents a Steel Insulation Boundary builder.
|
interface |
StiffenerBySupportPathBuilder
This class defines the builder to collect stiffener by support path data for Stiffener feature.
|
interface |
StiffenerLimitBuilder
This class defines the path limit method used by a Stiffener or Edge Reinforcement feature.
|
interface |
StiffenerStockBuilder
This class defines the Profile or Plate stock for a Stiffener or Edge Reinforcement feature.
|
interface |
SynchronizeDesignViewBuilder
This class is used to synchronize body features from design view to manufacturing view.
|
interface |
ThicknessDirectionBuilder
This class allows you to define the thickness direction for plate system features in Ship Basic Design and
and for grid planes in Ship Concept Design.
|
interface |
TransitionBuilder
This is to create a
TransitionBuilder which is used to create Detail Design elements from Basic Design elements. |
interface |
UnfoldedMinRecBuilder
Represents the class Features.ShipDesign.UnfoldedMinRecBuilder which is used to
calculate the unfolded minimum rectangle of ship basic design plates or standard parts.
|
interface |
VerifyPenetrationBuilder
Represents a
VerifyPenetrationBuilder builder To create a new instance of this class, use PenetrationRequestCollection.createVerifyPenetrationBuilder() Created in NX8.5.0 |
interface |
WeightAndCGBuilder
Represents the class Features.ShipDesign.WeightAndCGBuilder which is used to
calculate the weight and cg information.
|
Modifier and Type | Interface and Description |
---|---|
interface |
DisplayPropertiesBuilder
|
interface |
PathObjects
Contains objects that define a lattice path
Not a KF builder; see Fields.FieldManager methods to create a Fields.PathObjects. |
interface |
SpatialMapBuilder
|
Modifier and Type | Interface and Description |
---|---|
interface |
FlipComponentBuilder
Builder for flip component operation used in formboard.
|
interface |
FormboardLayoutBuilder
Class that performs the "layout" of Formboard geometry.
|
interface |
LayoutLengthOptions
Defines the various options for determining the rounded lengths of
formboard geometry during the layout or update process.
|
interface |
ObjectAttributeReferenceBuilder
Builder for "object attribute" used in formboard which enbles user to create
annotation in drafting functionality.
|
interface |
OrientBranchBuilder
Builder for "Orient Branch" operation used in formboard.
|
interface |
ShapeSegmentBuilder
Builder for Face Annotation functionality used in formboard.
|
interface |
UpdateFormboardBuilder
Class that performs the "update" of Formboard geometry.
|
Modifier and Type | Interface and Description |
---|---|
interface |
BaseExplicitOrderBuilder
This is the
BaseExplicitOrderBuilder for the explicit order This is an abstract class, and cannot be instantiated. |
interface |
CopyCutBuilder
Represents a
CopyCutBuilder
To create a new instance of this class, use ClipboardOperationsManager.createCopyCutBuilder() Created in NX7.5.0 |
interface |
ImageCaptureBuilder
Represents a
ImageCaptureBuilder builder To create a new instance of this class, use ImageCaptureManager.createImageCaptureBuilder() Default values. |
interface |
PasteBuilder
Represents a
PasteBuilder
To create a new instance of this class, use ClipboardOperationsManager.createPasteBuilder() Created in NX7.5.0 |
Modifier and Type | Interface and Description |
---|---|
interface |
CurveAnalysisCombsBuilder
Deprecated.
Deprecated in NX8.5.0. Use
CurveCurvatureAnalysis .
|
interface |
CurveAnalysisInflectionsBuilder
Deprecated.
Deprecated in NX8.5.0. Use
GeometricAnalysis.CurveCurvatureAnalysis .
|
interface |
CurveAnalysisPeaksBuilder
Deprecated.
Deprecated in NX8.5.0. Use
GeometricAnalysis.CurveCurvatureAnalysis .
|
interface |
CurveContinuityBuilder
Represents a curve continuity builder
To create a new instance of this class, use AnalysisObjectCollection.createCurveContinuityBuilder(nxopen.DisplayableObject) Default values. |
interface |
CurveCurvatureAnalysisBuilder
Represents a
CurveCurvatureAnalysis builder To create a new instance of this class, use AnalysisObjectCollection.createCurveCurvatureAnalysisBuilder(nxopen.DisplayableObject) Default values. |
interface |
DeviationChecking
Represents a
DeviationChecking
To create a new instance of this class, use AnalysisManager.createDeviationCheckingObject() Created in NX6.0.0 |
interface |
DeviationGaugeBuilder
DeviationGaugeBuilder class
To create a new instance of this class, use AnalysisObjectCollection.createDeviationGaugeBuilder(nxopen.DisplayableObject) Default values. |
interface |
DraftAnalysisBuilder
Represents a Draft Analysis builder
To create a new instance of this class, use AnalysisObjectCollection.createDraftAnalysisBuilder(nxopen.DisplayableObject) Default values. |
interface |
DupinBuilder
The Dupin Indicatrix is a tool to geometrically display the surface curvature at a specified point on a surface.
|
interface |
ExamineGeometry
Represents the Examine Geometry class
To create a new instance of this class, use AnalysisManager.createExamineGeometryObject() Created in NX5.0.0 |
interface |
FaceCurvatureAnalysisBuilder
Represents a
FaceCurvatureAnalysisBuilder builder. |
interface |
GapFlushnessBuilder
GapFlushnessBuilder class
To create a new instance of this class, use AnalysisObjectCollection.createGapFlushnessBuilder(nxopen.geometricanalysis.GapFlushness) Default values. |
interface |
GeometricProperties
Represents the Geometric Properties class.
|
interface |
HighlightLinesAnalysisBuilder
Represents a
HighlightLinesAnalysis
builder. |
interface |
LocalRadiusAnalysisBuilder
Represents a
LocalRadiusAnalysis builder To create a new instance of this class, use AnalysisObjectCollection.createLocalRadiusAnalysisBuilder(nxopen.geometricanalysis.LocalRadiusAnalysis) Default values. |
interface |
SimpleInterference
Represents the Simple Interference object.
|
interface |
SolidDensity
Represents a
SolidDensity
To create a new instance of this class, use AnalysisManager.createSolidDensityObject() Created in NX5.0.0 |
interface |
SurfaceContinuityAnalysisBuilder
Represents a
SurfaceContinuityAnalysis builder To create a new instance of this class, use AnalysisObjectCollection.createSurfaceContinuityAnalysisBuilder(nxopen.DisplayableObject) Default values. |
interface |
SurfaceIntersectionBuilder
Represents a
SurfaceIntersection builder To create a new instance of this class, use AnalysisObjectCollection.createSurfaceIntersectionBuilder(nxopen.DisplayableObject) Default values. |
Modifier and Type | Interface and Description |
---|---|
interface |
CircularGridBuilder
Represents the circular grid section specifications for a
SectionAnalysisBuilder . |
interface |
CurveAlignedBuilder
Represents the Curve Aligned specification for a
SectionAnalysisExBuilder . |
interface |
GridSpacingBuilder
Represents the grid spacing for certain types of section specifications for
the
SectionAnalysisBuilder . |
interface |
InteractiveBuilder
Represents the Interactive specification for a
SectionAnalysisExBuilder . |
interface |
IsoparametricBuilder
Represents the Isoparametric specification for a
GeometricAnalysis.SectionAnalysis.SectionAnalysisExBuilder . |
interface |
ParallelPlanesExBuilder
Represents the Parallel Plane specification for a
GeometricAnalysis.SectionAnalysis.SectionAnalysisExBuilder . |
interface |
QuadrilateralGridBuilder
Represents the quadrilateral grid section specifications for a
GeometricAnalysis.SectionAnalysis.SectionAnalysisBuilder . |
interface |
RadialBuilder
Represents the Radial specification for a
GeometricAnalysis.SectionAnalysis.SectionAnalysisExBuilder . |
interface |
SectionAnalysisBuilder
Represents a
nxopen.geometricanalysis.sectionanalysisObject builder. |
interface |
SectionAnalysisExBuilder
Represents a
SectionAnalysisExObject builder To create a new instance of this class, use AnalysisObjectCollection.createSectionAnalysisExBuilder(nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExObject) Default values. |
interface |
SectionPlaneBuilder
Represents a plane which is used to cut sections on faces or facet bodies .
|
interface |
TriangularGridBuilder
Represents the triangular grid section specifications for a SectionAnalysisBuilder.
|
interface |
XYZPlaneBuilder
Represents the XYZ Plane specification for a
GeometricAnalysis.SectionAnalysis.SectionAnalysisExBuilder . |
Modifier and Type | Interface and Description |
---|---|
interface |
AlignmentMethodBuilder
|
interface |
AlongPathPattern
the AlongPath pattern definition.
|
interface |
AlongSpineBuilder
|
interface |
AnchorLocatorBuilder
|
interface |
AngularLimits
Represents a angular limts data.
|
interface |
AngularPatternSpacing
defines the various ways pattern instances can be
spaced within the pattern, particularly in the context of the
PatternDefinition class.
|
interface |
BetweenLocationsData
|
interface |
BlendLimitsData
|
interface |
BlendSetbackBuilder
This class provides ability to define a setback curve on a blend face.
|
interface |
BlendStopshortBuilder
|
interface |
BooleanOperation
Represents a boolean operation .
|
interface |
BooleanRegionSelect
a class which defines boolean region select.
|
interface |
BooleanToolBuilder
a class which defines boolean tool builder.
|
interface |
BoundaryDefinitionBuilder
Represents a
BoundaryDefinitionBuilder . |
interface |
BoundingObjectBuilder
|
interface |
BridgeCurveConnectivity
Data offering connectivity controls for
BridgeCurveBuilderEx . |
interface |
CircularCrossSection
Represents a circular section data for face blend.
|
interface |
CircularFrameBuilder
|
interface |
CircularPattern
the circular pattern definition.
|
interface |
ColorCodedRegionBuilder
Represents a
ColorCodedRegionBuilder . |
interface |
CombOptionsBuilder
|
interface |
ConicCrossSection
Represents a conic section data for face blend.
|
interface |
Continuity
Represents a
Continuity
Allows user to specify continuity constraint surface construction. |
interface |
ControlPoleManagerData
This class manages the control poles for a set of surfaces or curves.
|
interface |
ConvertFeatureGroupsToModulesBuilder
Represents a
ConvertFeatureGroupsToModulesBuilder builder To create a new instance of this class, use FeatureCollection.createConvertFeatureGroupsToModulesBuilder() Created in NX9.0.0 |
interface |
CurveExtendData
|
interface |
CurveExtensionBuilder
Spline extension builder class.
|
interface |
CurveFitData
Represents the curve fitting methods options.
|
interface |
CurveFitJoin
Represents the curve fit join data
.
|
interface |
CurveFitOptions
Represents the curve fit data
.
|
interface |
CurveLengthData
Represents an CurveLength data.
|
interface |
CurveLimitsData
|
interface |
CurveOptions
Represents the curve options data
.
|
interface |
CurveRangeBuilder
Represents the curve range and anchor builder .
|
interface |
CurveShapingBuilder
Represents a
CurveShapingBuilder . |
interface |
DegreesAndSegmentsOrPatchesBuilder
the DegreesAndSegmentsOrPatches builder .
|
interface |
DepthSkewBuilder
This class provides ability to specify a depth and a skew value.
|
interface |
DisplayResolutionBuilder
Represents a
DisplayResolutionBuilder . |
interface |
DistancePatternSpacing
defines the various ways pattern instances can be
spaced within the pattern, particularly in the context of the
PatternDefinition class.
|
interface |
DraftPointData
Represents a draft point data object
To create an instance of this class, see DraftPointDataCollection.createDraftPointData(nxopen.Point, java.lang.String) Created in NX4.0.0 |
interface |
DraftVariableAngleData
Represents data containing variable angle draft point data objects
This class will not be created by the user. |
interface |
EndHoleData
|
interface |
EntityUsageInfo
Represents a
EntityUsageInfo . |
interface |
Extend
Represents an extend data.
|
interface |
ExtrudeRevolveToolBuilder
a class which is a sub-component of BooleanTool.
|
interface |
FacePlaneSelectionBuilder
|
interface |
FacePlaneToolBuilder
a sub-component of BooleanToolBuilder.
|
interface |
FaceSetData
|
interface |
FeatureOffset
Represents a Offset .
|
interface |
FeatureOptions
Represents various options supported on features.
|
interface |
FrameOnPathBuilder
Frame on path builder .
|
interface |
FtmFixedCurvesBuilder
Represents a
FtmFixedCurvesBuilder builder
To create a new instance of this class, use OmnicadManager.createFtmFixedCurvesBuilder() Default values. |
interface |
FtmTransformCurvesBuilder
Represents a
FtmTransformCurvesBuilder builder
To create a new instance of this class, use OmnicadManager.createFtmTransformCurvesBuilder() Default values. |
interface |
FtmTransformPointsBuilder
Represents a
FtmTransformPointsBuilder builder
To create a new instance of this class, use OmnicadManager.createFtmTransformPointsBuilder() Created in NX10.0.0 |
interface |
GeneralPattern
the General pattern definition.
|
interface |
GeometryLocationData
Represents a
GeometryLocationData
To create a new instance of this class, use GeometryLocationDataCollection.createGeometryLocationData() Created in NX5.0.0 |
interface |
HelixPattern
the Helix pattern definition.
|
interface |
HorizontalReference
the horizontal reference vector definition.
|
interface |
InstanceEditedExpressionItem
edited value of one master expression of the input object(s) being patterned.
|
interface |
InstanceEditedExpressionsList
list of
InstanceEditedExpressionItem objects. |
interface |
InteractiveSectionBuilder
Represents a
InteractiveSectionBuilder . |
interface |
LawBuilder
Represents a LawBuilder .
|
interface |
Limits
Represents a limits data.
|
interface |
LinearLimits
Represents a limits data.
|
interface |
LocalUntrimBuilder
Represents a
LocalUntrimBuilder builder. |
interface |
MatchSurfaceBuilder
Represents a
MatchSurfaceBuilder builder.This builder's Commit can create a b-surface To create a new instance of this class, use CAMDataPrepManager.createMatchSurfaceBuilder() Default values. |
interface |
MiddleHoleData
|
interface |
MirrorPattern
the Mirror pattern definition.
|
interface |
ModlAlongCurveAngle
|
interface |
ModlDistanceAngle
|
interface |
ModlMotion
|
interface |
MovePoleBuilder
This class manages the control poles movements for a surface or curve.
|
interface |
MultiDraft
Represents a multi-draft.
|
interface |
MultiTransitionLawBuilder
Represents multiple transition law.
|
interface |
NestModuleBuilder
Deprecated.
Deprecated in NX10.0.0. Use
FeatureCollection instead.
|
interface |
NonInflectingLawBuilder
Represents a non-inflecting law.
|
interface |
OnPathDimensionBuilder
Builds an on-path dimension .
|
interface |
OnPathDimWithValueBuilder
|
interface |
OnPathDistancePatternSpacing
defines the various ways pattern instances can be
spaced within the pattern, particularly in the context of the
PatternDefinition class.
|
interface |
OrientationMethodBuilder
|
interface |
ParentEquivalencyMap
Represents a
ParentEquivalencyMap . |
interface |
PartModuleInputBuilder
Represents a
PartModuleInputBuilder To create a new instance of this class, use PartModule.createPartModuleInputBuilder() Default values. |
interface |
PartModuleOutputBuilder
Represents a
PartModuleOutputBuilder To create a new instance of this class, use PartModule.createPartModuleOutputBuilder() Created in NX8.0.0 |
interface |
PartModuleOutputBuilder1
Represents a
PartModuleOutputBuilder1 To create a new instance of this class, use PartModule.createPartModuleOutputBuilder1() Default values. |
interface |
PartModuleReferencesBuilder
|
interface |
PartModuleRelationshipBuilder
Represents a
Features.PartModule builder To create a new instance of this class, use FeatureCollection.createPartModuleRelationshipBuilder(nxopen.features.PartModule) Created in NX8.0.0 |
interface |
PathLimits
Represents a path limits data.
|
interface |
PatternClocking
Deprecated.
Deprecated in NX8.0.0. This functionality is no longer supported.
|
interface |
PatternClockingBuilder
enables the ability to apply delta transforms on individual instances of a pattern within the pattern feature
To create a new instance of this class, use PatternDefinition.createClockingBuilder(int, int) Default values. |
interface |
PatternDefinition
pattern spacing for several pattern based commands.
|
interface |
PatternFill
the pattern fill definition.
|
interface |
PatternIncrementItem
variational for one master expression of the input object(s) being patterned.
|
interface |
PatternIncrementsBuilder
pattern increments builder .
|
interface |
PatternIncrementsList
list of
PatternIncrementItem objects. |
interface |
PatternInstanceEditBuilder
pattern instance edit builder
To create a new instance of this class, use PatternDefinition.createPatternInstanceEditBuilder() Created in NX7.5.0 |
interface |
PatternOrientation
the pattern orientation definition.
|
interface |
PatternReferencePointServiceBuilder
Pattern Reference Point is a service which enables the employing client to compute the reference point for pattern instance locations.
|
interface |
PatternSpacing
defines the various ways pattern instances can be
spaced within the pattern, particularly in the context of the
PatternDefinition class.
|
interface |
PatternSpacingsList
list of
PatternSpacingsListItem objects. |
interface |
PatternSpacingsListItem
one pattern spacing in the spacings list
To create a new instance of this class, use PatternSpacingsList.createPatternSpacingsListItem() Created in NX8.0.0 |
interface |
PointSetAlignmentBuilder
This class performs a point set to point set alignment
To create a new instance of this class, use Part.createPointSetAlignmentBuilder() Default values. |
interface |
PointsFromFileBuilder
Represents a
PointsFromFileBuilder builder
read points from a text file with format *.asc, *.txt, *.dat, *.pts
To create a new instance of this class, use Part.createPointsFromFileBuilder() Created in NX8.5.0 |
interface |
PolygonPattern
the polygon pattern definition.
|
interface |
PolygonPatternSpacing
defines the various ways pattern instances can be
spaced within the pattern, particularly in the context of the
PatternDefinition class.
|
interface |
ProjectionOptions
Represents a ProjectionOptions .
|
interface |
QuadrilateralFrameBuilder
|
interface |
Rebuild
Represents a
Rebuild . |
interface |
RectangularFrameBuilder
Rectangular frame builder .
|
interface |
RectangularPattern
the rectangular pattern definition.
|
interface |
ReduceSurfaceRadiusBuilder
Reduce Surface Radius Builder of Geometric Utilities.
|
interface |
ReferencePattern
the reference pattern definition.
|
interface |
RefitControlBuilder
This class is used to specify the parameter set to refit faces .
|
interface |
RegionTracker
a class which collects all the geometric entities used to identify a region of faces during a boolean feature.
|
interface |
RenameLinkedPartModulePartBuilder
Represents a
Features.PartModule builder To create a new instance of this class, use FeatureCollection.createRenameLinkedPartModulePartBuilder() Created in NX9.0.0 |
interface |
ReplAsstBuilder
Represents a
ReplAsstBuilder . |
interface |
RotationSetBuilder
|
interface |
SaveConstraintsBuilder
Represents a builder for a Save Constraints.
|
interface |
ScalingMethodBuilder
|
interface |
ScalingSetBuilder
|
interface |
SectionPlaneData
Represents a Section Plane Data class
This class acts like a container to hold the data needed to create a plane.
|
interface |
SelectDividingObjectBuilder
Represents the dividing tool block for dividing face .
|
interface |
ShapeFrameBuilder
|
interface |
SimpleDraft
Represents an Offset .
|
interface |
SmartVolumeProfileBuilder
This class contains the options for automatically closing the profile to surrounding model geometry.
|
interface |
SnipIntoPatchesBuilder
Represents a
SnipIntoPatchesBuilder builder. |
interface |
SpineDefinitionBuilder
Provides a spine definition for modeling operations .
|
interface |
SpinePointData
Represents a spine point def object
To create an instance of this class, see nxopen.geometricutilities Created in NX5.0.0 |
interface |
SpiralPattern
the Spiral pattern definition.
|
interface |
SplineExtensionBuilder
Spline extension builder class.
|
interface |
SShapedLawBuilder
Represents a s-shaped law.
|
interface |
StartHoleData
|
interface |
StepOptionBehavior
Represents a
StepOptionBehavior
It provides several step options for controlling behavior when
move face and so on. |
interface |
StyledSweepDoubleOnPathDimBuilder
|
interface |
StyledSweepReferenceMethodBuilder
|
interface |
SupportPlaneData
|
interface |
SurfaceRangeBuilder
Represents the surface range and anchor builder .
|
interface |
TangentMagnitudeBuilder
This class provides ability to specify the start and end
tangent magnitude values.
|
interface |
TransformerData
Transformation and orientation tool.
|
interface |
TransitionCurveBuilder
This class provides ability to create a transition(bridge) curve between two adjacent setback curves.
|
interface |
TriangularFrameBuilder
|
interface |
UnnestModuleBuilder
Deprecated.
Deprecated in NX10.0.0. Use
FeatureCollection instead.
|
Modifier and Type | Interface and Description |
---|---|
interface |
IssueBriefcaseSynchronizeBuilder
Represents a
IssueBriefcase synchronize builder To create a new instance of this class, use IssueBriefcase.createSynchronizeContentBuilder() Created in NX10.0.0 |
interface |
IssueContentBuilder
Represents a
IssueContent builder To create a new instance of this class, use IssueManager.createIssueContentBuilder(nxopen.issue.IssueContent) Default values. |
interface |
SnapshotSubsetBuilder
Used to create or edit issue snapshot subset.
|
interface |
SnapshotWorksetBuilder
Used to create or edit issue snapshot workset which is a container to hold all the corresponding
parts to represent an issue.
|
Modifier and Type | Interface and Description |
---|---|
interface |
AssemblyCreationSettingsBuilder
|
interface |
AssemblyFromLayout2dBuilder
Represents a Builder for create assembly from Layout functionality which will create a
new assembly from the selected Layout
To create a new instance of this class, use ComponentCollection.createAssemblyFromLayout2dBuilder() Created in NX10.0.0 |
interface |
ComponentNameBuilder
This class is used to construct the component name and part file name block, if it is in
manage mode, we also have item number, item revision and item name .
|
interface |
ComponentSettingsBlockBuilder
Represents the Component Settings Button (Layout2d.ComponentSettingsBlockBuilder)
Created in NX10.0.0 |
interface |
ComponentSettingsBuilder
Represents a
ComponentSettingsBuilder
This builder stores the information of the 2D Component settings
Created in NX10.0.0 |
interface |
DefineComponentAnchorPointBuilder
Represents a Builder for Define Component Anchor Point functionality which will define the anchor
point location of a 2D Component instance
To create a new instance of this class, use ComponentCollection.createDefineComponentAnchorPointBuilder() Created in NX10.0.0 |
interface |
DefineComponentBuilder
Represents a Builder for Define 2D component functionality which will define
a 2D Component and stores its definition in the Reuse Library
To create a new instance of this class, use ComponentCollection.createDefineComponentBuilder(nxopen.layout2d.Component) Default values. |
interface |
EditComponentSettingsBuilder
Represents a
EditComponentSettingsBuilder builder. |
interface |
InsertComponentBuilder
Represents a Builder for Insert Component functionality which will insert a 2D
Component instance in the active sketch
To create a new instance of this class, use ComponentCollection.createInsertComponentBuilder() Created in NX10.0.0 |
interface |
LocalDefinitionFolderBuilder
Represents a
LocalDefinitionFolderBuilder . |
interface |
MakeComponentUniqueBuilder
Represents a Builder for Make 2D Component unique functionality which will create a
new definition of the selected 2D Component instance
To create a new instance of this class, use ComponentCollection.createMakeComponentUniqueBuilder() Default values. |
interface |
NewComponentBuilder
Represents a Builder for New 2D Component functionality which will create an empty 2D Component
instance and stores its definition in the local 2D Component folder
To create a new instance of this class, use ComponentCollection.createNewComponentBuilder() Created in NX10.0.0 |
interface |
PublishComponentBuilder
Represents a Builder for Publish 2D Component functionality which will allow
local definitions to be exported into external storage locations
To create a new instance of this class, use ComponentCollection.createPublishComponentBuilder() Created in NX10.0.0 |
interface |
SmashComponentBuilder
Represents a Builder for Smash 2D Component functionality which will break instances
of 2D Components into its constituent pieces, we can have multiple committed objects
To create a new instance of this class, use ComponentCollection.createSmashComponentBuilder() Created in NX10.0.0 |
Modifier and Type | Interface and Description |
---|---|
interface |
EditObjectDisplayBuilder
The
nxopen.Markup.EditObjectDisplayBuilder is used to edit display settings of the markup objects. |
Modifier and Type | Interface and Description |
---|---|
interface |
AdapterFormulaBuilder
Represents a
AdapterFormulaBuilder . |
interface |
AdapterSignalBuilder
Represents a
AdapterSignalBuilder . |
interface |
AddComponentBuilder
Represents a
AddComponentBuilder To create a new instance of this class, use FunctionObjectCollection.createAddComponentBuilder() Created in NX7.5.1 |
interface |
AngularLimitJointBuilder
Represents a
AngularLimitJoint builder. |
interface |
AngularSpringJointBuilder
Represents a
AngularSpringJoint builder. |
interface |
BallJointBuilder
Represents a
BallJoint builder. |
interface |
BreakingConstraintBuilder
Represents a
BreakingConstraint builder. |
interface |
CamBuilder
Represents a
Cam builder. |
interface |
CamProfileBuilder
Represents a
CamProfile builder. |
interface |
ChangeMaterialBuilder
Represents a
ChangeMaterial builder. |
interface |
ChangeOwnerBuilder
Represents a
ChangeOwnerBuilder . |
interface |
CollisionMaterialBuilder
Represents a
CollisionMaterial builder. |
interface |
ConvertFromMTBBuilder
Represents a
ConvertFromMTBBuilder To create a new instance of this class, use PhysicsManager.createConvertFromMtbbuilder() Created in NX9.0.0 |
interface |
CouplingBuilder
This is an abstract class, and cannot be created.
|
interface |
CurveOnCurveJointBuilder
Represents a
CurveOnCurveJoint builder To create a new instance of this class, use CurveOnCurveJointCollection.createCurveOnCurveJointBuilder(nxopen.mechatronics.CurveOnCurveJoint) Default values. |
interface |
CylindricalJointBuilder
Represents a
CylindricalJoint builder. |
interface |
DependencyCreatorBuilder
Represents a
DependencyCreatorBuilder builder. |
interface |
DisplayChangerBuilder
Represents a
DisplayChanger builder. |
interface |
ElectricalPartBuilder
Represents a
ElectricalPart builder To create a new instance of this class, use ElectricalPartCollection.createElectricalPartBuilder(nxopen.mechatronics.ElectricalPart) Created in NX9.0.0 |
interface |
ExternalConnectionElementBuilder
Represents a
ExternalConnectionElementBuilder builder To create a new instance of this class, use nxopen.mechatronics.ExternalConnectionCollection#createExternalConnectionElementBuilder Created in NX8.0.1 |
interface |
FixedJointBuilder
Represents a
FixedJoint builder. |
interface |
FunctionObjectBuilder
Represents a
FunctionObjectBuilder To create a new instance of this class, use FunctionObjectCollection.createFunctionObjectBuilder(nxopen.mechatronics.FunctionObject) Created in NX7.5.1 |
interface |
GanttExportPLCopenBuilder
Represents a
GanttOperationObject builder To create a new instance of this class, use GanttCollection.createGanttExportPlcopenBuilder(nxopen.mechatronics.GanttOperationObject) Default values. |
interface |
GanttLinkerBuilder
Represents a
GanttLinkerBuilder To create a new instance of this class, use GanttLinkerCollection.createGanttLinkerBuilder(nxopen.mechatronics.GanttLinker) Created in NX10.0.0 |
interface |
GanttOperationBuilder
Represents a
GanttOperationBuilder builder To create a new instance of this class, use GanttCollection.createGanttOperationBuilder(nxopen.mechatronics.GanttOperationObject) Created in NX7.5.1 |
interface |
GanttOperationConditionBuilder
Represents a
GanttOperationConditionBuilder To create a new instance of this class, use GanttCollection.createGanttOperationConditionBuilder() Created in NX7.5.1 |
interface |
GanttOperationParameterBuilder
Represents a
GanttOperationParameterBuilder To create a new instance of this class, use GanttCollection.createGanttOperationParameterBuilder() Created in NX7.5.1 |
interface |
GearBuilder
Represents a
Gear builder. |
interface |
GraphControlBuilder
Represents a
GraphControl builder To create a new instance of this class, use GraphControlCollection.createGraphControlBuilder(nxopen.mechatronics.GraphControl) Created in NX8.0.0 |
interface |
HingeJointBuilder
Represents a
HingeJoint builder. |
interface |
LinearLimitJointBuilder
Represents a
LinearLimitJoint builder. |
interface |
LinearSpringJointBuilder
Represents a
LinearSpringJoint builder. |
interface |
LogicObjectBuilder
Represents a
LogicObject builder To create a new instance of this class, use LogicObjectCollection.createLogicObjectBuilder(nxopen.mechatronics.LogicObject) Created in NX8.5.0 |
interface |
MotionProfileBuilder
Represents a
MotionProfile builder. |
interface |
ObjectInformationBuilder
Represents a
ObjectInformationBuilder This is a sub-builder class and cannot be directly instantiated Created in NX8.5.0 |
interface |
ObjectSinkBuilder
Represents a
ObjectSink builder. |
interface |
ObjectSourceBuilder
Represents a
ObjectSource builder. |
interface |
ObjectTransformerBuilder
Represents a
ObjectTransformer builder. |
interface |
OPCClientBuilder
Represents a
OPCClientBuilder To create a new instance of this class, use PhysicsManager.createOpcclientBuilder() Created in NX8.0.0 |
interface |
ParameterStockBuilder
Represents a
ParameterStockBuilder builder. |
interface |
PathConstraintFrameBuilder
Represents a frame that constrains the orientation along the path curve.
|
interface |
PathConstraintJointBuilder
Represents a
PathConstraintJoint builder. |
interface |
PhysicsConstraintBuilder
This is an abstract class, and cannot be created.
|
interface |
PhysicsJointBuilder
Represents a base builder for Physics Joints.
|
interface |
PointOnCurveJointBuilder
Represents a
PointOnCurveJoint builder To create a new instance of this class, use PointOnCurveJointCollection.createPointOnCurveJointBuilder(nxopen.mechatronics.PointOnCurveJoint) Default values. |
interface |
PositionControlBuilder
Represents a
PositionControlBuilder . |
interface |
PreventCollisionBuilder
Represents a
PreventCollision builder. |
interface |
ProxyObjectBuilder
Represents a
ProxyObjectBuilder . |
interface |
ProxyObjectParameterBuilder
Represents a
ProxyObjectParameterBuilder . |
interface |
ProxyOverrideObjectBuilder
Represents a
ProxyOverrideObjectBuilder . |
interface |
ReadWriteDeviceBuilder
Represents a
ReadWriteDeviceBuilder . |
interface |
ReplacePhysicsBuilder
Represents a
ReplacePhysicsBuilder builder. |
interface |
RigidBodyBuilder
Represents a
RigidBodyBuilder . |
interface |
RuntimeBehaviorBuilder
Represents a
RuntimeBehaviorBuilder . |
interface |
RuntimeFormulaBuilder
Represents a
Mechatronics.RuntimeFormulaBuilder . |
interface |
RuntimeFormulaParameterBuilder
Represents a
RuntimeFormulaParameterBuilder builder To create a new instance of this class, use RuntimeFormulaCollection.createRuntimeFormulaParameterBuilder(nxopen.mechatronics.RuntimeFormulaParameter) Created in NX8.5.0 |
interface |
RuntimeNCBuilder
Represents a
RuntimeNCBuilder . |
interface |
SelectAdapterSignal
Represents a single object selection.
|
interface |
SelectCollisionSensor
Represents a single object selection.
|
interface |
SelectCollisionSensorList
Represents a list of objects on a selection list.
|
interface |
SelectLogicObjectList
Represents a list of objects on a selection list.
|
interface |
SelectPhysicsConstraint
Represents a single object selection.
|
interface |
SelectPhysicsJoint
Represents a single object selection.
|
interface |
SelectRigidBody
Represents a single object selection.
|
interface |
SelectSystemObject
Represents a single object selection.
|
interface |
SelectTagFormObject
Represents a single object selection.
|
interface |
SHMConfigurationBuilder
Represents a
SHMConfigurationBuilder builder To create a new instance of this class, use PhysicsManager.createSHMConfigurationBuilder() Created in NX9.0.0 |
interface |
SignalAdapterBuilder
Represents a
SignalAdapterBuilder . |
interface |
SignalMappingBuilder
Represents a
SignalMappingBuilder To create a new instance of this class, use PhysicsManager.createSignalMappingBuilder() Created in NX8.5.0 |
interface |
SlidingJointBuilder
Represents a
SlidingJoint builder. |
interface |
SpeedControlBuilder
Represents a
SpeedControl builder. |
interface |
SpringDamperBuilder
Represents a
SpringDamper builder. |
interface |
SystemObjectBuilder
Represents a
SystemObject builder This is an abstract class and cannot be created. |
interface |
TagFormBuilder
Represents a
TagFormBuilder . |
interface |
TransportSurfaceBuilder
Represents a
TransportSurfaceBuilder . |
interface |
VirtualAxisBuilder
Represents a
nxopen.mechatronics.VirtualAxis builder To create a new instance of this class, use VirtualAxisCollection.createVirtualAxisBuilder(VirtualAxis) Created in NX10.0.0 |
Modifier and Type | Interface and Description |
---|---|
interface |
SelectBlend
Represents a
SelectBlend
Allows user to specify blend faces. |
Modifier and Type | Interface and Description |
---|---|
interface |
BodyContactBuilder
Represents a
BodyContactBuilder To create a new instance of this class, use BodyContactCollection.createBodyContactBuilder(nxopen.motion.BodyContact) Default values. |
interface |
BushingBuilder
Represents a Motion BushingBuilder
To create a new instance of this class, use BushingCollection.createBushingBuilder(nxopen.motion.Bushing) Default values. |
interface |
BushingCoefficients
Represents a Motion BushingCoefficients
.
|
interface |
BushingCylindricalCoefficients
Represents a Motion BushingCylindricalCoefficients
.
|
interface |
BushingCylindricalCoefficientsComponent
Represents a Motion BushingCylindricalCoefficientsComponent
.
|
interface |
BushingDefine
Represents a Motion BushingDefine .
|
interface |
BushingGeneralCoefficients
Represents a Motion BushingGeneralCoefficients
.
|
interface |
BushingGeneralCoefficientsComponent
Represents a Motion BushingGeneralCoefficientsComponent
.
|
interface |
ConnectorBuilder
Represents ConnectorBuilder
This is an abstract class, and cannot be created. |
interface |
CouplerBuilder
Represents a
CouplerBuilder This is an abstract class, and cannot be created. |
interface |
CouplerCableBuilder
Represents a
CouplerCableBuilder To create a new instance of this class, use CouplerCollection.createCouplerCableBuilder(nxopen.motion.CouplerCable) Default values. |
interface |
CouplerGearBuilder
Represents a
CouplerGearBuilder To create a new instance of this class, use CouplerCollection.createCouplerGearBuilder(nxopen.motion.CouplerGear) Default values. |
interface |
CouplerRckpnBuilder
Represents a
CouplerRckpnBuilder To create a new instance of this class, use CouplerCollection.createCouplerRckpnBuilder(nxopen.motion.CouplerRckpn) Default values. |
interface |
CurveContactBuilder
Represents a
CurveContactBuilder To create a new instance of this class, use CurveContactCollection.createCurveContactBuilder(nxopen.motion.CurveContact) Default values. |
interface |
CurveOnCurveBuilder
Represents a
CurveOnCurveBuilder
To create a new instance of this class, use CurveOnCurveCollection.createCurveOnCurveBuilder(nxopen.motion.CurveOnCurve) Created in NX6.0.0 |
interface |
DamperBuilder
Represents a DamperBuilder
To create a new instance of this class, use DamperCollection.createDamperBuilder(nxopen.motion.Damper) Created in NX6.0.0 |
interface |
FlexBodyBuilder
Represents a
FlexBody builder To create a new instance of this class, use FlexBodyCollection.createFlexBodyBuilder(nxopen.motion.FlexBody) Default values. |
interface |
GeneralCouplerBuilder
Represents a
GeneralCouplerBuilder To create a new instance of this class, use GeneralCouplerCollection.createGeneralCouplerBuilder(nxopen.motion.GeneralCoupler) Default values. |
interface |
GraphBuilder
Represents a
GraphBuilder ,
only creation is supported
To create a new instance of this class, use GraphManager.createGraphBuilder(nxopen.motion.Graph) Created in NX5.0.0 |
interface |
JointBuilder
This builder class is used to create or edit
Joint objects. |
interface |
JointDriverBuilder
Represents a
JointDriverBuilder
To create a new instance of this class, use JointDriverCollection.createJointDriverBuilder(nxopen.motion.JointDriver) Created in NX5.0.0 |
interface |
LinkBuilder
Represents a
LinkBuilder
To create a new instance of this class, use LinkCollection.createLinkBuilder(nxopen.motion.Link) Created in NX5.0.0 |
interface |
LoadTransferBuilder
Represents a
LoadTransferBuilder To create a new instance of this class, use LoadTransferCollection.createLoadTransferBuilder(nxopen.motion.LoadTransfer) Default values. |
interface |
MarkerBuilder
Represents a builder of Marker
To create a new instance of this class, use MarkerCollection.createMarkerBuilder(nxopen.motion.Marker) Default values. |
interface |
MarkerToNodeData
|
interface |
MotionBuilder
This builder class is used to create or edit
MotionObject This is an abstract class, and cannot be created. |
interface |
MotionSensorBuilder
Represents a
MotionSensorBuilder
To create a new instance of this class, use MotionSensorCollection.createMotionSensorBuilder(nxopen.motion.MotionSensor) Default values. |
interface |
MotionSolutionBuilder
Represents a
MotionSolutionBuilder
To create a new instance of this class, use MotionSolutionCollection.createSolutionBuilder(nxopen.motion.MotionSolution) Created in NX5.0.0 |
interface |
MotorBuilder
This builder class is used to create or edit
Motor This is an abstract class, and cannot be created. |
interface |
PackagingBuilder
This class an abstract class and base class for
PackagingMeasureBuilder ,
PackagingTraceBuilder and PackagingInterferenceBuilder . |
interface |
PackagingInterferenceBuilder
This the builder class to create or edit an Interference object.
|
interface |
PackagingMeasureBuilder
This is the builder class to create or edit a Measure object.
|
interface |
PackagingTraceBuilder
This is the builder class to create or edit a Trace object.
|
interface |
PhysicsConversionBuilder
Represents a
PhysicsConversionBuilder builder To create a new instance of this class, use MotionSession.createPhysicsConversionBuilder(nxopen.NXObject) Created in NX8.0.0 |
interface |
PlantInputBuilder
Represents a
PlantInput builder To create a new instance of this class, use PlantInputCollection.createPlantInputBuilder(nxopen.motion.PlantInput) Created in NX6.0.0 |
interface |
PlantOutputBuilder
Represents a
PlantOutput builder To create a new instance of this class, use PlantOutputCollection.createPlantOutputBuilder(nxopen.motion.PlantOutput) Created in NX6.0.0 |
interface |
PMDCMotorBuilder
Represents a
PMDCMotorBuilder To create a new instance of this class, use PMDCMotorCollection.createPmdcMotorBuilder(nxopen.motion.PMDCMotor) Created in NX6.0.0 |
interface |
PointOnCurveBuilder
Represents a
PointOnCurveBuilder
To create a new instance of this class, use PointOnCurveCollection.createPointOnCurveBuilder(nxopen.motion.PointOnCurve) Default values. |
interface |
PointOnSurfaceBuilder
Represents a
PointOnSurfaceBuilder
To create a new instance of this class, use PointOnSurfaceCollection.createPointOnSurfaceBuilder(nxopen.motion.PointOnSurface) Created in NX6.0.0 |
interface |
ScalarForceBuilder
Represents a
ScalarForceBuilder To create a new instance of this class, use ScalarForceCollection.createScalarForceBuilder(nxopen.motion.ScalarForce) Created in NX6.0.0 |
interface |
ScalarTorqueBuilder
Represents a
ScalarTorqueBuilder To create a new instance of this class, use ScalarTorqueCollection.createScalarTorqueBuilder(nxopen.motion.ScalarTorque) Created in NX6.0.0 |
interface |
SelectJoint
Represents a single object selection.
|
interface |
SelectLink
Represents a single object selection.
|
interface |
SelectMarker
Represents a single object selection.
|
interface |
SignalChartBuilder
Represents a
SignalChartBuilder To create a new instance of this class, use SignalChartCollection.createSignalChartBuilder(nxopen.motion.SignalChart) Created in NX6.0.0 |
interface |
SignalChartListItem
Represents a SignalChartListItem,
List Item inside a SignalChartBuilder
To create a new instance of this class, use SignalChartCollection.createSignalChartListItem() Created in NX6.0.0 |
interface |
SpringBuilder
Represents a SpringBuilder
To create a new instance of this class, use SpringCollection.createSpringBuilder(nxopen.motion.Spring) Default values. |
interface |
VectorForceBuilder
Represents a
VectorForceBuilder
To create a new instance of this class, use VectorForceCollection.createVectorForceBuilder(nxopen.motion.VectorForce) Created in NX5.0.0 |
interface |
VectorTorqueBuilder
Represents a
VectorTorqueBuilder
To create a new instance of this class, use VectorTorqueCollection.createVectorTorqueBuilder(nxopen.motion.VectorTorque) Created in NX5.0.0 |
Modifier and Type | Interface and Description |
---|---|
interface |
DesignStudyAttributeBuilder
Represents a
DesignStudyAttributeBuilder To create a new instance of this class, use DesignStudyCollection.createDesignStudyAttributeBuilder() Created in NX6.0.0 |
interface |
DesignStudyBuilder
Represents a
DesignStudyBuilder To create a new instance of this class, use DesignStudyCollection.createDesignStudyBuilder() Created in NX6.0.0 |
interface |
MapleExpBuilder
Represents a
MapleExpBuilder To create a new instance of this class, use OptimizationCollection.createMapleExpBuilder() Created in NX7.5.0 |
interface |
OptimizationAttributeBuilder
Represents a
OptimizationAttributeBuilder To create a new instance of this class, use OptimizationCollection.createOptimizationAttributeBuilder() Created in NX6.0.0 |
interface |
OptimizationBuilder
Represents a
OptimizationBuilder To create a new instance of this class, use OptimizationCollection.createOptimizationBuilder() Created in NX6.0.0 |
Modifier and Type | Interface and Description |
---|---|
interface |
AttributeGroupReviseBuilder
Represents an attribute group revise builder.
|
interface |
ConfigurationContextBuilder
Represents a
ConfigurationContextBuilder builder To create a new instance of this class, use ConfigurationManager.createConfigurationContextBuilder() Created in NX9.0.0 |
interface |
EffectivityAttributePropertiesBuilder
Represents an
EffectivityAttributePropertiesBuilder to be used for creating effectivity attributes. |
interface |
ObjectCreateBuilder
Represents a builder class that perofrms create operation
To create a new instance of this class, use PdmSession.createObjectCreateBuilder(java.lang.String[], java.lang.String[]) Created in NX10.0.0 |
interface |
PartCreationObjectAttributePropertiesBuilder
Deprecated.
Deprecated in NX8.5.0. Use
AttributePropertiesBuilder instead.
|
interface |
PartOperationAttributePropertiesBuilder
Represents an
PartOperationAttributePropertiesBuilder to be used for
creating attributes in part operation. |
interface |
PartOperationBuilder
Represents a builder class that performs various design element operations.
|
interface |
PartOperationCopyBuilder
Represents a builder class that performs various Save As operations.
|
interface |
PartOperationCreateBuilder
Represents a builder class that performs Create operations
To create a new instance of this class, use PdmSession.createCreateOperationBuilder(nxopen.pdm.PartOperationBuilder.OperationType) Created in NX10.0.0 |
interface |
PartOperationMakeUniqueBuilder
Represents a
PartOperationMakeUniqueBuilder builder To create a new instance of this class, use PdmSession.createMakeUniqueOperationBuilder(nxopen.BasePart) Created in NX10.0.0 |
interface |
PartOperationValidationPropertiesBuilder
Represents an
PartOperationValidationPropertiesBuilder to be used
for overriding the default validation parameters for a part in import operation. |
interface |
VariantConfigurationBuilder
Represents a builder class that performs variant rule configuration.
|
Modifier and Type | Interface and Description |
---|---|
interface |
PhysicalMaterialAssignBuilder
Represents a Physical Material Assign Builder
To create a new instance of this class, use PhysicalMaterialCollection.createMaterialAssignBuilder() Created in NX6.0.0 |
interface |
PhysicalMaterialLibMgrBuilder
Represents a
PhysicalMaterialLibMgrBuilder builder To create a new instance of this class, use PhysicalMaterialCollection.createMaterialLibmgrBuilder() Created in NX6.0.0 |
interface |
PhysicalMaterialListBuilder
This builder is used by the Materials list component that allows copying, editing, deleting. etc.
|
Modifier and Type | Interface and Description |
---|---|
interface |
LoadDraftingStandardBuilder
Represents a
LoadDraftingStandardBuilder
To create a new instance of this class, use DraftingPreferenceManager.createLoadDraftingStandardBuilder() Created in NX5.0.0 |
interface |
ViewSection
Records / queries view section preferences.
|
Modifier and Type | Interface and Description |
---|---|
interface |
AddFontBuilder
Builder for creating an add font user interface dialogue
To obtain an instance of this class use AddFontBuilder Created in NX8.5.0 |
interface |
AssignCornerBuilder
Builder class for Assign Corner which creates corner
To create a new instance of this class, use RouteManager.createAssignCornerBuilder() Default values. |
interface |
AssignDiscontinuityBuilder
the Builder to Assign Discontinuity for the stocks
To create a new instance of this class, use RouteManager.createAssignDiscontinuityBuilder(nxopen.NXObject) Created in NX7.5.0 |
interface |
AssignPathBuilder
Assigns path to a broken routing run
To create a new instance of this class, use RouteManager.createAssignPathBuilder(nxopen.routing.Run) Created in NX8.5.0 |
interface |
AttributeMembersBuilder
Creates attibutemembers builder object to add to the search criteria list used by FindByAttributesBuilder
To create a new instance of this class, use FindByAttributesBuilder.attributeMembersBuilder() Created in NX8.5.0 |
interface |
BranchPathNumberingBuilder
Builder class for Branch Path Numbering.
|
interface |
ClockPartBuilder
Builder class for clock part object
To create a new instance of this class, use RouteManager.createClockPartBuilder(nxopen.NXObject) Default values. |
interface |
CompareRunsBuilder
Represents a
CompareRunsBuilder , used to compare runs in the work
part to the ones in another part, or to runs defined in xml files gathered in a folder
(native mode) or on an item revision (managed mode). |
interface |
ConnectedCurvesBuilder
Builder for creating automatically creating segments on end-to-end connected
curves.
|
interface |
ConnectPathBuilder
Represents a
ConnectPathBuilder . |
interface |
CopeCornerBuilder
Deprecated.
Deprecated in NX8.0.0. Use
AssignCornerBuilder instead.
|
interface |
CornerTypeBuilder
Contains setting for corner creation.
|
interface |
CreateFabricationBuilder
Builder class to fabricate subassembly from standard parts, path segments, stock, and other routing objects within the current routing assembly
To create a new instance of this class, use RouteManager.createFabricationBuilder(nxopen.NXObject[]) Created in NX8.0.0 |
interface |
DefineRunBuilder
Builder Class for DefineRun Object
To create a new instance of this class, use RouteManager.createDefineRunBuilder(nxopen.routing.Run) Created in NX8.5.0 |
interface |
DeleteFontsBuilder
Represents a
DeleteFontsBuilder
To create a new instance of this class, use RouteManager.createDeleteFontsBuilder(nxopen.NXObject[]) Created in NX8.5.0 |
interface |
DeleteGapsBuilder
Represents a
DeleteGapsBuilder
To create a new instance of this class, use RouteManager.createDeleteGapsBuilder(nxopen.NXObject[]) Created in NX8.5.0 |
interface |
DeleteObjectsBuilder
Represents a
DeleteObjectsBuilder
To create a new instance of this class, use RouteManager.createDeleteObjectsBuilder(nxopen.NXObject[]) Created in NX6.0.0 |
interface |
DesignRuleViolationViewer
This class can be used to set the violation id, update text for overridding the violation and
update the user name used to override the violation.
|
interface |
DivisionsBuilder
Represents a
DivisionsBuilder
Builder for creating/editing splits at an end of a duct. |
interface |
DuctReinforcementBuilder
Builder for creating/editing duct reinforcements.
|
interface |
DuctSizeCalculatorBuilder
Builder to perform calculations of the duct which is to be used in the HVAC applications.
|
interface |
EditBendAngleBuilder
To create a new instance of this class, use RouteManager.createEditBendAngleBuilder(nxopen.NXObject) Created in NX7.5.0 |
interface |
EditCharacteristicsBuilder
Builder to edit required and optional characteristics of
Routing.Stock
or Assemblies.Component as defined in the application view file. |
interface |
EditLineSegmentBuilder
Builder for the "Edit Line Segment" operation.
|
interface |
EditPlacePartBuilder
To create a new instance of this class, use RouteManager.createEditPlacePartBuilder(nxopen.assemblies.Component) Created in NX10.0.0 |
interface |
ElbowSnapSettings
Helper object used the by
LinearPathBuilder builder. |
interface |
FillerStockBuilder
Creates Filler stock on selected Segments.
|
interface |
FindByAttributesBuilder
Find runs/objects with specified attribute name and attribute value criteria,
highlight the corresponding nodes in the run navigator and the graphics area
To create a new instance of this class, use RouteManager.createFindByAttributesBuilder() Created in NX8.5.0 |
interface |
FittingOverstockBuilder
Builder for creating or editing
FittingOverstock objects. |
interface |
GapDisplayBuilder
Builder for creating a gap arc object on a line segment.
|
interface |
HandrailBuilder
Represents a
HandrailBuilder
Creates a handrail from a selected point. |
interface |
InfoObjectsBuilder
Represents a
InfoObjectsBuilder
To create a new instance of this class, use RouteManager.createInfoObjectsBuilder(nxopen.NXObject[]) Created in NX6.0.0 |
interface |
InstanceNameLookupBuilder
Represents a
InstanceNameLookupBuilder . |
interface |
IntegrateRunsBuilder
Builder Class for Integrate Runs Object
To create a new instance of this class, use RouteManager.integrateRunsBuilder(nxopen.routing.Run, nxopen.routing.Run) Default values. |
interface |
IsoDrawingBuilder
Represents a
IsoDrawingBuilder , used to run the ISOGEN engine
to create isometric drawings of piping networks. |
interface |
LinearPathBuilder
Builder for creating routing linear paths.
|
interface |
LinearPathSettings
Helper object used the by
Routing.LinearPathBuilder builder. |
interface |
ManualRouteBuilder
To create a new instance of this class, use RouteManager.createManualRouteBuilder(nxopen.routing.electrical.ElectricalStockDevice.RouteLevel, nxopen.routing.electrical.ElectricalStockDevice) Created in NX7.5.0 |
interface |
MergeStocksBuilder
Represents a
MergeStocksBuilder
Builder for merging routing stocks ( including space reservation stocks ). |
interface |
ModelTerminalsBuilder
The Builder to Model/UnModel the Terminals
To create a new instance of this class, use RouteManager.modelTerminalsBuilder() Default values. |
interface |
OverstockBuilder
Builder for creating/editing overstocks.
|
interface |
OverstockFacesBuilder
Builder for qualifying faces for overstock application over fittings.
|
interface |
PathStockBuilder
Assigns stocks to segments based of users critiera and the current
default stock.
|
interface |
PlacementSolutionsBuilder
To create a new instance of this class, use RouteManager.createPlacementSolutionsBuilder() Created in NX7.5.0 |
interface |
PlacePartBuilder
To create a new instance of this class, use RouteManager.createPlacePartBuilderPTS(nxopen.TaggedObject, nxopen.TaggedObject, nxopen.Point3d, nxopen.TaggedObject) Created in NX7.5.0 |
interface |
PlatformCreatorBuilder
Builder for creating platform.
|
interface |
QuickPathBuilder
Builder for creating a collision free path between points.
|
interface |
RemoveDiscontinuityBuilder
Builder class for remove discontinuity object
To create a new instance of this class, use RouteManager.createRemoveDiscontinuityBuilder(nxopen.NXObject[]) Created in NX7.5.0 |
interface |
RouteObjectCollector
Represents a
RouteObjectCollector class
to create objects for getting routing objects. |
interface |
RouteSweptFoldBuilder
Represents a Rout Swept Fold Builder
To create a new instance of this class, use RouteManager.createRouteSweptFoldBuilder(nxopen.NXObject, nxopen.NXObject) Created in NX7.0.0 |
interface |
RouteSweptTwistBuilder
To create a new instance of this class, use RouteManager.createRouteSweptTwistBuilder(nxopen.NXObject) Created in NX6.0.0 |
interface |
RoutingMeasureDistanceBuilder
Represents a
RoutingMeasureDistanceBuilder Creator not available in KF because transient objects are not supported. |
interface |
RunItemsBuilder
The builder for creating the list item of RunItems
To create a new instance of this class, use DefineRunBuilder.createRunItemsBuilder() Created in NX8.5.0 |
interface |
SegmentPairBuilder
The builder for creating the list item of SegmentPairs
To create a new instance of this class, use AssignDiscontinuityBuilder.segmentPairBuilder() Created in NX7.5.0 |
interface |
SelectControlPoint
Represents a single object selection.
|
interface |
SelectISegment
Represents a single object selection.
|
interface |
SelectLineSegment
Represents a single object selection.
|
interface |
SelectRun
Represents a single object selection.
|
interface |
SelectStock
Represents a single object selection.
|
interface |
SimplifyPathBuilder
Represents a
SimplifyPathBuilder for Simplify Path operation. |
interface |
SpaceReservationBuilder
Represents a
SpaceReservationBuilder
This builder takes one or more segments and creates space reservation stock on it. |
interface |
SplinePathBuilder
Builder for creating a D-Cubed constrained spline.
|
interface |
SplitDuctBuilder
Represents a
SplitDuctBuilder
Builder for creating/editing splits at an end of a duct. |
interface |
SplitRunBuilder
Builder Class for Split Run Object
To create a new instance of this class, use RouteManager.splitRunBuilder(nxopen.routing.Run) Default values. |
interface |
StockBrowserBuilder
Builder class for stock browser .
|
interface |
StockBuilder
Builder for creating/editing stocks.
|
interface |
StockColorBuilder
Represents a
StockColorBuilder . |
interface |
StockOffsetPointBuilder
Applies Assemblies Constraints to a selected
Point or
ControlPoint to mimic the update/move behavior of
the input smart Point . |
interface |
StockPartConverterBuilder
Represents a
StockPartConverterBuilder
Builder for Part Conversion of the stocks. |
interface |
StockStyleBuilder
Builder class to assigns style to the selected stock .
|
interface |
StockTransitionBuilder
Builder for creating/editing stockTransition.
|
interface |
SubdivideSegmentBuilder
Represents a
SubdivideSegmentBuilder . |
interface |
TransformPathBuilder
Builder for the "Transform Path" operation.
|
interface |
UnifyPathBuilder
Builder to unify
Routing.Stock and Assemblies.Component
based on specified characteristic values. |
interface |
WatertightFittingsBuilder
Represents a
WatertightFittingsBuilder To create a new instance of this class, use RouteManager.createWatertightFittingsBuilder() Created in NX8.0.0 |
interface |
WindCatcherBuilder
Builder class for Wind Catcher feature.
|
Modifier and Type | Interface and Description |
---|---|
interface |
AssignProxyBuilder
Represents a
AssignProxyBuilder . |
interface |
CablewaysBuilder
Represents
CablewaysBuilder . |
interface |
CablewaysLayoutBuilder
Represents
CablewaysLayoutBuilder . |
Modifier and Type | Interface and Description |
---|---|
interface |
ShapeSearchBuilder
This class provides the methods to execute shape search and get the searched results.
|
Modifier and Type | Interface and Description |
---|---|
interface |
IsvControlPanelBuilder
Represents a
IsvControlPanelBuilder
To create a new instance of this class, use KinematicConfigurator.createIsvControlPanelBuilder(nxopen.sim.IsvControlPanelBuilder.VisualizationType, nxopen.cam.CAMObject[]) Created in NX8.0.0 |
interface |
KinematicAxisBuilder
Represents the SimKimAxisBuilder class object
Use the KinematicConfigurator class to create a KinematicAxisBuilder object. |
interface |
KinematicChain
This class is used for add kinematic chain to the list.
|
interface |
KinematicChainConfiguration
This class is used for define kinematic chains.
|
interface |
KinematicComponentBuilder
Represents the KinamaticComponentBuilder class object
To create a new instance of this class, use KinematicComponentCollection.createHeadBaseComponentBuilder(nxopen.sim.KinematicComponent) Created in NX7.5.0 |
interface |
KinematicJunctionBuilder
Represents the SimKimJunctionBuilder class object
Use the KinematicConfigurator class to create a KinematicJunctionBuilder object. |
interface |
KinematicSinumerikCaBuilder
This class is used for edit sinumerik collision avoidance properties.
|
interface |
SimDebugBuilder
Represents a
SimDebugBuilder
To create a new instance of this class, use KinematicConfigurator.createSimDebugBuilder() Created in NX8.0.0 NX_REMOVE_FROM_JAVA_API |
interface |
SinumerikCaFacetBuilder
This class is used for set the facet tolerance.
|
interface |
SinumerikCaPlaceholderBuilder
This class is used for select or unselect component of the placeholder tools.
|
interface |
SinumerikCaSimplifyBodiesBuilder
This class is used for replace geometry.
|
Modifier and Type | Interface and Description |
---|---|
interface |
AddReusablePart
Represents a
AddReusablePart
To create a new instance of this class, use AddReusablePartCollection.createBuilder() Created in NX5.0.0 |
interface |
AssemblyDrawingBuilder
Represents a
AssemblyDrawingBuilder which is
used to create or edit the Assembly Drawing. |
interface |
AssignPatchBuilder
Represents a builder to be used to add sheet bodies as patch surfaces or delete patch surfaces.
|
interface |
AutoDimensionBuilder
Represents a
AutoDimensionBuilder which is
used to create or edit the Auto Dimension. |
interface |
BackingPadBuilder
Represents a
BackingPadBuilder which is used to create or delete the Backing Pad. |
interface |
BendInsertDesignBuilder
Represents a
BendInsertDesignBuilder
Bend Insert Design is to create inset puch or die for bend . |
interface |
BendOperationBuilder
Represents a
BendOperationBuilder builder. |
interface |
BlankGeneratorBuilder
Represents a
BlankGeneratorBuilder
This class is for Blank Generator Design UI
To create a new instance of this class, use BlankGeneratorCollection.createBlankGeneratorBuilder() Created in NX7.5.0 |
interface |
BlankLayoutBuilder
Progressive Die Wizard blank layout builder
To create a new instance of this class, use BlankLayoutCollection.createBlankLayoutBuilder() Default values. |
interface |
BlankNestingBuilder
Blank Nesting Builder of PDW, EDW and Die Engineering.
|
interface |
BlendCurve3DBuilder
Represents a
BlendCurve3DBuilder builder which implements
blend curves in one side where the corner radius is too small. |
interface |
BomBuilder
Represents a Tooling::BomBuilder builder
To create a new instance of this class, use BomCollection.createBomBuilder() Default values. |
interface |
BomListBuilder
Represents a
BomListBuilder builder. |
interface |
BurringInsertBuilder
Progressive Die Wizard builder to design burring punch and die insert
To create a new instance of this class, use BurringInsertCollection.createBurringInsertBuilder() Default values. |
interface |
CalculateAreaBuilder
The CalculateArea builder
To create a new instance of this class, use CalculateAreaCollection.createBuilder() Default values. |
interface |
ChangeoverManagementBuilder
Represents a
ChangeoverManagementBuilder to support changeover workflow management. |
interface |
ChannelAdjustBuilder
The builder class for Channel Adjust which assists you
to adjust the postion and the length of the channel.
|
interface |
ChannelFittingBuilder
The builder class for Channel Fitting which assists you
to add cooling fitting.
|
interface |
ClearanceManagementBuilder
Progressive Die Wizard builder to management clearances.
|
interface |
CompDrawingBuilder
Represents a
CompDrawingBuilder which is
used to create or edit the Component Drawing. |
interface |
ConceptPositionBuilder
concept position builder for standard part design
To create a new instance of this class, use ConceptPositionCollection.createConceptPositionBuilder() Created in NX6.0.0 |
interface |
ConcurrentDesignManagementBuilder
Represents a
ConcurrentDesignManagementBuilder to support concurrent design workflow management. |
interface |
CoolingConnectBuilder
The builder class for Cooling connection which assists you
to create channel and connect it to other channels.
|
interface |
CoolingDefineChannelBuilder
The builder class for Cooling Define Channel which assists you
to create channels directly.
|
interface |
CoolingExtendBuilder
The builder class for Channel Extend which assists you
to extend the channel.
|
interface |
CoolingPatternBuilder
The builder class for Cooling pattern which assists you
to create channels with selected curves.
|
interface |
CornerDesignBuilder
Represents a
CornerDesignBuilder ,
Corner Design is to provide tools to make corner. |
interface |
CreateBoxBuilder
Represents a box creation operation
To create a new instance of this class, use CreateBoxCollection.createBoxBuilder(nxopen.NXObject) Default values. |
interface |
DefineCamBuilder
Represents a
DefineCamBuilder to create different types of cam objects, which
are used for kinematic motion To create a new instance of this class, use ProgressiveDieManager.createDefineCamBuilder() Default values. |
interface |
DefineLifterBuilder
Represents a
DefineLifterBuilder to create different types of lifter objects, which
are used for kinematic motion. |
interface |
DefineNeutralFactorBuilder
Represeents a
DefineNeutralFactorBuilder to define
neutral factor according to material and formula in the spreadsheet table. |
interface |
DesignTrimToolBuilder
Represents a builder to be used to create Mold Wizard design trim tool.
|
interface |
DieBaseBuilder
Represents Progressive Die Wizard and Engineering Die Wizard builder to manage die base.
|
interface |
DieDesDrawDieBuilder
Represents the Die Design draw die management builder, which is to create a draw die by selected
sheet body, curve and base plane.
|
interface |
DieDesDrawPunchBuilder
Die Design draw punch management builder, create a draw die punch by selected sheet body, curve
and base plane.
|
interface |
DieDesignLowerBinderBuilder
Represents a Lower Binder builder
To create a new instance of this class, use AutoDieCollection.createDieDesignLowerBinderBuilder(nxopen.features.Feature) Created in NX9.0.0 |
interface |
DieDesignSettingBuilder
Represents a
DieDesignSettingBuilder
This class is for Die Design Setting UI
To create a new instance of this class, use DieDesignSettingCollection.createDieDesignSettingBuilder() Created in NX7.5.0 |
interface |
DieDesignTrimPostBuilder
Represents a Trim Post builder
To create a new instance of this class, use AutoDieCollection.createDieDesignTrimPostBuilder(nxopen.features.Feature) Created in NX9.0.0 |
interface |
DieDesPierceInsertBuilder
Represents Die Design Pierce Insert builder.
|
interface |
DieEngProcessUpdateManagerBuilder
Die Engineer process update manager management builder.
|
interface |
DieEngTrimAngleCheckBuilder
Represents a Trim Angle Check builder
To create a new instance of this class, use AutoDieCollection.createDieEngTrimAngleCheckBuilder(nxopen.geometricanalysis.AnalysisObject) Default values. |
interface |
DirectUnbendBuilder
The builder contains all inputs for direct unbend.
|
interface |
DirectUnfoldBuilder
The builder contains all inputs for direct unfolding.
|
interface |
DrawingSheetNameBuilder
Represents a
DrawingSheetNameBuilder To create a new instance of this class, use ToolingDrawingCollection.createDrawingSheetNameBuilder() Created in NX8.5.0 |
interface |
EdgePatchBuilder
Represents a builder to be used to create edge patch surfaces.
|
interface |
EjectorPostProcessingBuilder
Represents a builder to be used to create Mold Wizard ejector post processing.
|
interface |
ElectrodeBlankBuilder
Design electrode blank builder to create an electrode blank for the selected body.
|
interface |
ElectrodeCheckingBuilder
Electrode Checking builder to check the touch status of all electrode.
|
interface |
ElectrodeComponentBuilder
Electrode component builder to install holder and pallet.
|
interface |
ElectrodeCopyBuilder
The ElectrodeCopy builder
To create a new instance of this class, use ElectrodeCopyCollection.createElectrodeCopyBuilder() Default values. |
interface |
ElectrodeDeleteBuilder
Electrode delete component builder to remove blank, pallet and holder from assembly.
|
interface |
ElectrodeDesign
Represents an Electrode Design.
|
interface |
ElectrodeInitializationBuilder
Electrode initialize project builder to creates an electrode design assembly.
|
interface |
EnlargeSurfaceBuilder
Mold Wizard enlarge surface management builder, trims a enlarged surface to a boundary of edges,
curves, datum planes or faces.
|
interface |
EWDraftingBuilder
Represents the drafting builder which is used to create electrode drafting.
|
interface |
EWMultiPositionBuilder
Represents the multiple position builder which is used to get transformed electrode heads together.
|
interface |
FaceAttributeBuilder
Represents a builder to be used to create face attribute.
|
interface |
FaceColorManagementBuilder
Tooling builder to assign and edit color of objects
To create a new instance of this class, use FaceColorManagementCollection.createFaceColorManagementBuilder() Default values. |
interface |
FaceSplitBuilder
Represents a face split operation
To create a new instance of this class, use FaceSplitCollection.createFaceSplitBuilder() Default values. |
interface |
FamilyMoldBuilder
Creates a Mold Wizard Family Mold builder
To create a new instance of this class, use FamilyMoldCollection.createFamilyMoldBuilder() Created in NX6.0.0 |
interface |
FastenerAssemConfigBuilder
Represents a Fastener Assem Config Collection.
|
interface |
FastenerAssy
Represents a
FastenerAssy
To create a new instance of this class, use FastenerAssyCollection.createBuilder() Created in NX5.0.0 |
interface |
FastenerAssyCustomizationBuilder
Fastener assembly customization builder.
|
interface |
FlowAnalysisBuilder
Represents the builder which is used to create flow analysis.
|
interface |
FlowDisplayBuilder
Represents the builder which is used to create flow analysis.
|
interface |
ForceCalculationBuilder
Represents a
ForceCalculationBuilder
Force Calculation Design is to calculate force of process
To create a new instance of this class, use ForceCalculationCollection.createForceCalculationBuilder() Default values. |
interface |
FormingInsertBuilder
Progressive Die Wizard builder to design forming punch and die insert
To create a new instance of this class, use FormingInsertCollection.createFormingInsertBuilder() Default values. |
interface |
GeneralInsertBuilder
General Insert Design Builder of PDW and EDW.
|
interface |
GuidedExtensionBuilder
Builder for creating Guided Extension surface in NX
To create a new instance of this class, use GuidedExtensionManager.createBuilder() Default values. |
interface |
HemFixerBuilder
Hem Fixer Builder of PDW and EDW.
|
interface |
HoleManufacturingNoteBuilder
Tooling builder for HoleManufacturingNote
To create a new instance of this class, use HoleManufacturingNoteCollection.createHoleManufacturingNoteBuilder() Default values. |
interface |
InitProjBuilder
Represents a
InitProjBuilder
To create a new instance of this class, use InitProjCollection.createInitProjBuilder() Default values. |
interface |
InitProjectBuilder
Mold Wizard initialize project builder
To create a new instance of this class, use InitProjectCollection.createBuilder() Default values. |
interface |
InsertAuxiliaryBuilder
PDW insert auxiliary builder to design various auxiliaries of insert group
To create a new instance of this class, use InsertAuxiliaryCollection.createInsertAuxiliaryBuilder() Default values. |
interface |
IntermediateStageBuilder
Represents a
IntermediateStageBuilder builder. |
interface |
LayoutBuilder
Represents a Tooling::LayoutBuilder builder
To create a new instance of this class, use MWLayoutCollection.createLayoutBuilder() Default values. |
interface |
LayoutManagementBuilder
Layout Management Builder of Engineering Die Wizard
To create a new instance of this class, use LayoutManagementCollection.createLayoutManagementBuilder() Default values. |
interface |
LayoutRepositionBuilder
Represents a Tooling::LayoutRepositionBuilder builder
To create a new instance of this class, use MWLayoutCollection.createLayoutRepositionBuilder() Default values. |
interface |
LsdynaFormAnalysisResultDisplayBuilder
Represents a Ly-Dyna Formability Analysis - Result Display builder
To create a new instance of this class, use AutoDieCollection.createLsdynaFormAnalysisResultDisplayBuilder() Default values. |
interface |
LsdynaGeometryPreparationBuilder
Stamping Die LS-Dyna integration draw geometry preprare builder.
|
interface |
LsdynaKfileGeneratorBuilder
Represents LS-Dyna K file builder - K file generator builder
To create a new instance of this class, use AutoDieCollection.createLsdynaKfileGeneratorBuilder() Default values. |
interface |
ManufacturingGeometryBuilder
Represents a builder to be used to create manufacturing geometry.
|
interface |
MoldCsysBuilder
Mold Wizard MoldCsys project builder
To create a new instance of this class, use MoldCsysCollection.createMoldCsysBuilder() Default values. |
interface |
MoldDesign
Represents an Mold Design.
|
interface |
MoldInsertBuilder
Mold Wizard mold insert management builder
To create a new instance of this class, use MoldInsertCollection.createMoldInsertBuilder() Default values. |
interface |
MoldProcessBuilder
Represents a Tooling::MoldProcessBuilder builder
To create a new instance of this class, use MoldProcessCollection.createMoldProcessBuilder() Default values. |
interface |
MotionSimulationBuilder
Represents a
MotionSimulationBuilder to support dynamic interference check. |
interface |
MWCopySheetsBuilder
Builder for copying sheets in the Mold Wizard application
To create a new instance of this class, use MWCopySheetsCollection.createBuilder() Default values. |
interface |
MWDefineRegionsBuilder
The MWDefineRegions builder
To create a new instance of this class, use MWDefineRegionsCollection.createBuilder() Default values. |
interface |
MWDefineSheetsBuilder
Builder for defining sheets in Mold Wizard
To create a new instance of this class, use MWDefineSheetsCollection.createBuilder() Default values. |
interface |
MWDesignGuideLinesBuilder
The builder for designing guide lines in Mold Wizard.
|
interface |
MWDesignPartingSurfaceBuilder
The builder for designing parting surface in Mold Wizard.
|
interface |
MWMoldedPartValidationBuilder
Represents a builder to be used to perform Molded Part Validation analysis.
|
interface |
MWPartingManagerBuilder
Builder for the Parting Manager in the Mold Wizard application
To create a new instance of this class, use MWPartingManagerCollection.createBuilder() Created in NX7.5.0 |
interface |
MWSearchRegionBuilder
The Search Region builder is for defining a region by searching the region faces given a set of seed faces and boundary edges.
|
interface |
MWTraversePartingLinesBuilder
Builder for creating parting lines by traversing in the Mold Wizard application
To create a new instance of this class, use MWTraversePartingLinesCollection.createBuilder() Created in NX7.5.0 |
interface |
ObjectAttributeManagementBuilder
Tooling builder to assign and edit attributes of objects
To create a new instance of this class, use ObjectAttributeManagementCollection.createObjectAttributeManagementBuilder() Default values. |
interface |
OffsetCurve3DBuilder
Deprecated.
Deprecated in NX10.0.0. Please use
Offset3DCurveBuilder instead
|
interface |
PiercingInsertBuilder
Represents piercing insert builder.
|
interface |
PocketBuilder
Mold Wizard pocket management builder
To create a new instance of this class, use PocketCollection.createPocketBuilder() Created in NX6.0.0 |
interface |
ProfileSplitBuilder
The ProfileSplit builder
To create a new instance of this class, use ProfileSplitCollection.createProfileSplitBuilder() Created in NX6.0.0 |
interface |
QuickQuotationBuilder
Progressive Die Wizard builder to create quick quotation.
|
interface |
ReferenceBlendBuilder
The ReferenceBlend builder
To create a new instance of this class, use ReferenceBlendCollection.createReferenceBlendBuilder() Created in NX7.0.0 |
interface |
ReliefDesignBuilder
Represents a
ReliefDesignBuilder
Relief Design is to cut relief pocket for forming region . |
interface |
RemoveHolesBuilder
Remove Hole is used to patch holes for a solid body.
|
interface |
ReplaceSolidBuilder
Represents a replace solid operation.
|
interface |
ReusableObjectPasteBuilder
Represents a
ReusableObjectPasteBuilder Use the ReusableObjectManager class to create a ReusableObjectPasteBuilder. |
interface |
ReusablePocketBuilder
Reusable pocket builder.
|
interface |
RunnerBuilder
Mold Wizard runner management builder, select curves as runner guide, choose section type and edit
section parameters, optional choose boolean type to create runner channel.
|
interface |
RunSimulationBuilder
Represents a
RunSimulationBuilder to animate the model,
analyze the collision and reference. null is returned To create a new instance of this class, use ProgressiveDieManager.createRunSimulationBuilder() Default values. |
interface |
ScrapDesignBuilder
Represents a scrap design builder
To create a new instance of this class, use ScrapDesignCollection.createScrapDesignBuilder() Default values. |
interface |
SectionLineCreationBuilder
Represents a
SectionLineCreationBuilder which is
used to create or edit the section line creation. |
interface |
ShimBuilder
Shim Builder of PDW and EDW.
|
interface |
ShimInnerProfileSetBuilder
This is a seed block of set list.
|
interface |
SlugRetentionBuilder
Represents a
SlugRetentionBuilder which is used to create the Slug Retention. |
interface |
SolidPatchBuilder
Represents a builder to be used to create a solid patch.
|
interface |
SpecifyBaffleBuilder
Represents a builder to be used to create specify baffle.
|
interface |
SpecifyCircuitBuilder
Represents a builder to be used to create specify circuit.
|
interface |
SplitSolidBuilder
Represents a builder to be used to split a solid with geometry tools.
|
interface |
StandardPartBuilder
Represents a builder to be used to create Mold Wizard Standard Part.
|
interface |
StandardPartPositionBuilder
Represents a StandardPartPositionBuilder to add or edit a standard part in the selected plane with specified position.
|
interface |
StripLayoutBuilder
Represents a
StripLayoutBuilder
This class is for Strip Layout Design UI
To create a new instance of this class, use StripLayoutCollection.createStripLayoutBuilder() Created in NX6.0.0 |
interface |
StripLayoutStationInformationBuilder
Strip Layout Process Description Builder of Tooling.
|
interface |
StripperVentingBuilder
Stripper Venting Builder of PDW and EDW.
|
interface |
SubInsertBuilder
The SubInsert builder
To create a new instance of this class, use SubInsertCollection.createSubInsertBuilder() Default values. |
interface |
TraverseLoopBuilder
The builder class for Traverse Loop component which assists you
to select or traverse a string of adjacent curves or edges.
|
interface |
TrimMoldComponentsBuilder
Represents a builder to be used to create Mold Wizard trim mold components.
|
interface |
TrimRegionBuilder
Mold Wizard trim region management builder, trims a body to a boundary of edges, curves or bodies.
|
interface |
TrimSolidBuilder
Mold Wizard trim solid management builder, trims bounding box body with region, subtract
bounding box with workpiece or keep region and box.
|
interface |
UnfoldingSimulationBuilder
Unfolding Simulation Builder of PDW and EDW.
|
interface |
UnusedFileManagementBuilder
Represents a
UnusedFileManagementBuilder
Unused File Management is to manage the unused files of the project. |
interface |
ValidCheckBuilder
This is the JA builder for static interference check
To create a new instance of this class, use ValidCheckCollection.createValidCheckBuilder() Default values. |
interface |
WallThicknessCheckerBuilder
Represents a builder to be used to perform wall thickness analysis.
|
interface |
WireHoleBuilder
Represents a
WireHoleBuilder
This class is for Wire Hole Design UI
To create a new instance of this class, use WireHoleCollection.createWireHoleBuilder() Default values. |
interface |
WorkpieceBuilder
Mold Wizard work piece builder
To create a new instance of this class, use WorkpieceCollection.createWorkpieceBuilder() Default values. |
Modifier and Type | Interface and Description |
---|---|
interface |
InstantiationBuilder
Represents a
InstantiationBuilder
To create a new instance of this class, use Collection.createInstantiationBuilder(nxopen.userdefinedtemplate.Instantiation) Created in NX10.0.0 |
Modifier and Type | Interface and Description |
---|---|
interface |
OverrideBuilder
Represents a
Override builder To create a new instance of this class, use ResultObject.createOverrideBuilder(nxopen.validate.Override) Default values. |
interface |
RequirementBuilder
Represents a
Requirement builder To create a new instance of this class, use RequirementCollection.createRequirementBuilder(nxopen.validate.Requirement) Default values. |
interface |
ValidatorOptions
Contains information about run options of check-mate checking process.
|
Modifier and Type | Interface and Description |
---|---|
interface |
SpecifyDateBuilder
Represents a Specify Date Builder
To create a new instance of this class, use VisualReportManager.createSpecifyDateBuilder() Created in NX8.0.0 |
Modifier and Type | Interface and Description |
---|---|
interface |
AutoPointBuilder
Represents a
AutoPointBuilder builder To create a new instance of this class, use WeldManager.createAutoPointBuilder(nxopen.features.Feature) Default values. |
interface |
AutoWeldSymbolsBuilder
Represents a
AutoWeldSymbolsBuilder builder To create a new instance of this class, use WeldManager.createAutoWeldSymbolsBuilder() Created in NX8.0.0 |
interface |
CharacteristicsBuilder
This builder allows you to define the attribute values to be set on the
output of the weld feature.
|
interface |
ConnectedFaceFinderBuilder
Represents a builder to run the Connected Face Finder operation.
|
interface |
ConnectionFinderBuilder
Represents a builder to display, manage, delete, and allow the user to
reparent face information for the weld objects.
|
interface |
DatumCommonBuilder
Used to create or edit a
DatumSurface or DatumPin feature. |
interface |
DatumIconBuilder
Represents a
DatumIconBuilder class used to control the part navigator icon for Datum Pin and Surface Locators. |
interface |
DatumPinBuilder
Used to create or edit a
DatumPin feature. |
interface |
DatumSurfaceBuilder
Used to create or edit a
DatumSurface feature. |
interface |
EasyPatternBuilder
Represents the easy pattern builder.
|
interface |
EdgePrepBuilder
A builder used to create or edit a
EdgePrep feature. |
interface |
EdgePrepValuesBuilder
Used to view or edit the values used to define the welding joint and edge preparation.
|
interface |
ExportWeldBuilder
Represents a ExportWeldBuilder class
To create a new instance of this class, use WeldManager.createExportWeldBuilder() Default values. |
interface |
ExportWeldJointBuilder
Represents exporting weld joints.
|
interface |
InformationBuilder
This class is used by "Fabrication Information" to output fabrication objects information.
|
interface |
JointExitBuilder
Used to set custom edge preparation parameters of a
WeldJoint feaure. |
interface |
JointItemBuilder
Used to create or edit a
Weld.WeldJoint feature. |
interface |
JointmarkFaceSetsBuilder
Used to create or edit a set of faces for Jointmark
To create a new instance of this class, use JointmarkBuilder.newFaceSets() Created in NX9.0.0 |
interface |
JointmarkGuideBuilder
Used to create or edit a guide curve for Jointmark.
|
interface |
JointmarkPointsBuilder
Used to create or edit a point in the list of points for Jointmark
To create a new instance of this class, use JointmarkBuilder.newPoints() Created in NX9.0.0 |
interface |
PointMarkPointBuilder
Used to create or edit a point in the list of points for Jointmark
To create a new instance of this class, use PointMarkBuilder.newPointsOverride() Created in NX10.0.0 |
interface |
SelectDatumPin
Represents a single object selection.
|
interface |
SelectDatumSurface
Represents a single object selection.
|
interface |
StructureWeldBuilder
This class is used to create or edit the information shared among all Structure Weld builders.
|
interface |
SurfaceWeldBuilder
Use to create or edit a
SurfaceWeld feature. |
interface |
UserDefinedWeldBuilder
Represents a
UserDefinedWeldBuilder builder. |
interface |
WeldAdvisorBuilder
Represents a weld advisor test
To create a new instance of this class, use WeldManager.createWeldAdvisorBuilder() Created in NX7.5.0 |
interface |
WeldBeadBuilder
Used to create or edit a
WeldBead feature. |
interface |
WeldBeadPathBuilder
Represents the path the bead shape will be swept along.
|
interface |
WeldFillBuilder
A builder used to create or edit a
Fill feature. |
interface |
WeldFillStripBuilder
A builder used to create or edit a single strip of the
WeldFillBuilder . |
interface |
WeldJointBuilder
Used to create or edit a
WeldJoint feature. |
interface |
WeldLabelBuilder
Create weld labels for multiple welds and BIW locators, this builder's Commit can produce more than one object,
the GetCommittedObjects can be used to get the objects and the order of GetCommittedObject's output array is stable.
|
interface |
WeldObjectBuilder
Represents a
WeldObjectBuilder class used to collect welding objects created or edited from a command. |
interface |
WeldPmiBuilder
Create PMI symbols for multiple structure welds, this builder's Commit can produce more than one object,
the GetCommittedObjects can be used to get the objects and the order of GetCommittedObject's output array is stable.
|
interface |
WeldPointBuilder
Represents a Spot Weld feature
To create a new instance of this class, use WeldManager.createWeldPointBuilder(nxopen.features.Feature) Default values. |
interface |
WeldPointExitBuilder
Represents a
WeldPointExitBuilder class used to pass welding object from the Weld Point command to a user callback. |
interface |
WeldPreferenceBuilder
Represents a
WeldPreferenceBuilder builder To create a new instance of this class, use WeldManager.createPreferenceBuilder() Default values. |
Copyright 2011 Siemens Product Lifecycle Management Software Inc. All Rights Reserved.