Package | Description |
---|---|
nxopen |
Provides classes and interfaces for the NX Open Common API.
|
nxopen.annotations |
Provides classes and interfaces relating to Dimensions, Notes, Symbols, PMI, and other Annotations.
|
nxopen.assemblies |
Provides classes and interfaces for Assemblies.
|
nxopen.assemblies.productinterface |
Provides classes and interfaces for Assembly Product Interfaces.
|
nxopen.blockstyler |
Provides classes and interfaces for the Block Styler.
|
nxopen.bodydes |
Provides classes and interfaces for Body Design.
|
nxopen.cae |
Provides classes and interfaces relating to Advanced Simulation and Design Simulation.
|
nxopen.cae.ftk |
Provides classes and interfaces relating to Advanced Simulation and Design Simulation.
|
nxopen.cae.modelcheck |
Provides classes and interfaces for Model Check.
|
nxopen.cae.optimization |
Provides classes and interfaces relating to Optimization.
|
nxopen.cae.responsesimulation |
Provides classes and interfaces for Response Simulation.
|
nxopen.cae.xyplot |
Provides classes and interfaces for XY Graphing.
|
nxopen.cam |
Provides classes and interfaces for Manufacturing.
|
nxopen.cam.fbm |
Provides classes and interfaces for Manufacturing.
|
nxopen.die |
Provides classes and interfaces relating to Die Engineering and Die Design.
|
nxopen.display |
Provides classes and interfaces for display.
|
nxopen.drafting |
Provides classes and interfaces for the Drafting.
|
nxopen.drawings |
Provides classes and interfaces for Drafting Drawings.
|
nxopen.facet |
Provides classes and interfaces for Faceted Representations.
|
nxopen.features |
Provides classes and interfaces for features.
|
nxopen.features.sheetmetal |
Provides classes and interfaces for Sheet Metal Features.
|
nxopen.features.shipdesign |
Provides classes and interfaces for Ship Design.
|
nxopen.features.subdivision |
Provides classes and interfaces for Manufacturing.
|
nxopen.features.vehicledesign |
Provides classes and interfaces for the Vehicle Design.
|
nxopen.fields |
Provides classes and interfaces for Fields.
|
nxopen.formboard |
Provides interfaces and classes to the Routing Electrical Formboard functionality.
|
nxopen.gateway |
Provides classes and interfaces for Gateway.
|
nxopen.geometricanalysis |
Provides classes and interfaces for Geometric Analysis.
|
nxopen.geometricanalysis.sectionanalysis |
Provides classes and interfaces for Section Analysis.
|
nxopen.geometricutilities |
Provides classes and interfaces for Geometric Utilities.
|
nxopen.issue |
Provides classes and interfaces for the Issue Management.
|
nxopen.layer |
Provides classes and interfaces for layer.
|
nxopen.layout2d |
Provides classes and interfaces for Manufacturing.
|
nxopen.markup |
Provides classes and interfaces for Manufacturing.
|
nxopen.mechatronics |
Provides classes and interfaces for Mechatronics.
|
nxopen.modldirect |
Provides classes and interfaces for Direct Modeling.
|
nxopen.motion |
Provides classes and interfaces for Motion Simulation.
|
nxopen.optimization |
Provides classes and interfaces for Optimization.
|
nxopen.partfamily |
Provides classes and interfaces for Manufacturing.
|
nxopen.pdm |
Provides classes and interfaces for PDM.
|
nxopen.physmat |
Provides classes and interfaces for Physical Material.
|
nxopen.positioning |
Provides classes and interfaces for Assembly Positioning and Constraints.
|
nxopen.preferences |
Provides classes and interfaces for preferences.
|
nxopen.routing |
Provides classes and interfaces for Routing.
|
nxopen.routing.electrical |
Provides classes and interfaces for Routing Electrical.
|
nxopen.shapesearch |
Provides classes and interfaces for Shape Search.
|
nxopen.sheetmetal |
Provides classes and interfaces for Sheet Metal.
|
nxopen.sim |
Provides classes and interfaces for Machine Tool Builder and CAM-Simulation.
|
nxopen.tooling |
Provides classes and interfaces for Tooling.
|
nxopen.userdefinedobjects |
Provides classes and interfaces for User Defined Objects (UDOs).
|
nxopen.userdefinedtemplate |
Provides classes and interfaces for Manufacturing.
|
nxopen.validate |
Provides classes and interfaces for Validation Utilities.
|
nxopen.visualreporting |
Provides classes and interfaces for Visual Reporting.
|
nxopen.weld |
Provides classes and interfaces for Weld.
|
Modifier and Type | Interface and Description |
---|---|
interface |
Arc
Represents an arc curve.
|
interface |
ASCImporter
Represents a
ASCImporter . |
interface |
AttributePropertiesBaseBuilder
Represents an
AttributePropertiesBaseBuilder to be used for creating attributes. |
interface |
AttributePropertiesBuilder
Represents an
AttributePropertiesBuilder . |
interface |
AttributeTemplatesBuilder
Represents an
AttributeTemplatesBuilder to be used when creating attribute
templates. |
interface |
AutomaticTraceline
Represents an automatic traceline.
|
interface |
BasePart
Base class for an NX part.
|
interface |
BaseSession
A base class for NXOpen session classes
|
interface |
BasicEffectivityBuilder
Represent an interface class for basic effectivity block to assign or edit discrete effectivity unit values.
|
interface |
Body
Represents a Body
.
|
interface |
BodyList
Represents a list of objects.
|
interface |
Builder
A Builder is an object that is used to create and edit other objects.
|
interface |
CartesianCoordinateSystem
Represents a cartesian coordinate system
To create a new instance of this class, use CoordinateSystemCollection.createCoordinateSystem(nxopen.Point3d, nxopen.Matrix3x3, boolean) Created in NX4.0.0 |
interface |
Catiav4Creator
Represents a
Catiav4Creator to be used when exporting the CATIA V4 Data
This class is created using DexManager . |
interface |
Catiav4Importer
Represents a
Catiav4Importer to be used when importing the CATIA V4 Data
This class is created using DexManager . |
interface |
Catiav5Creator
Represents a
Catiav5Creator to be used when exporting the CATIA V5 Data
This class is created using DexManager . |
interface |
Catiav5Importer
Represents a
Catiav5Importer to be used when importing the CATIA V5 Data
This class is created using DexManager . |
interface |
CDF
Represents a
CDF , which is a representation of an NX color palette. |
interface |
CGMBuilder
Represents a
CGMBuilder to be used when exporting the Current Display
or drawing sheets to a CGM. |
interface |
CGMImporter
Used to import a CGM file into the work part.
|
interface |
CollaborativeDesign
A collaborative design is created in Teamcenter.
|
interface |
ColorDefinition
Represents a
ColorDefinition , which is a representation of one color
on an NX color palette. |
interface |
ColorWidth
Represents a
ColorWidth used by WidthDefinition to
define a custom width for each color. |
interface |
Conic
Represents a conic curve.
|
interface |
ConvertToFromReferenceBuilder
Represents a
ConvertToFromReferenceBuilder
To create a new instance of this class, use SketchCollection.createConvertToFromReferenceBuilder() Created in NX5.0.0 |
interface |
CoordinateSystem
Represents a coordinate system
This is an abstract class . |
interface |
Curve
Represents a curve.
|
interface |
CustomWidth
Represents a
CustomWidth used by WidthDefinition to
define the three custom widths associated with each WidthDefinition. |
interface |
CutView
Represents a Cut View
Cut Views may only be created via a Master Cut Builder. |
interface |
CylindricalCoordinateSystem
Represents a cylindrical coordinate system
To create a new instance of this class, use CoordinateSystemCollection.createCylindricalCoordinateSystem(nxopen.Point3d, nxopen.Vector3d, nxopen.Vector3d) Created in NX4.0.0 |
interface |
DateBuilder
The DateBuilder class allows a date and/or time to be input or output via the DateItem builder.
|
interface |
DateItemBuilder
This class stores a date and time.
|
interface |
DateItemBuilderList
Represents a list of objects.
|
interface |
DatumPlane
Represents a datum plane
This object can not be created by KF it's the display objet of the datum plane . |
interface |
Decal
Represents a Material Texture decal pair
This class is restricted to being called from a program running during an Interactive NX session. |
interface |
DexBuilder
This is an abstract class that provides the basic functionality common to all dex builders.
|
interface |
DisplayableObject
Base class for all objects that are displayable.
|
interface |
DxfdwgCreator
Represents a
DxfdwgCreator to be used when exporting the DXF/DWG Data
This class is created using DexManager . |
interface |
DxfdwgImporter
Represents a
DxfdwgImporter to be used when importing the DXF/DWG Data
This class is created using DexManager . |
interface |
Edge
|
interface |
EffectivityConditionBuilder
Represent a utility class to assign or edit discrete and range effectivity unit values in the
context of a
CollaborativeDesign . |
interface |
Ellipse
Represents an ellipse curve.
|
interface |
EndCutBlockBuilder
Represents a End Cut Block Builder.
|
interface |
Expression
Represents an expression.
|
interface |
ExpressionCollectorSet
An object that binds an expression with an entity section in the context of a list.
|
interface |
ExpressionCollectorSetList
Represents a list of objects.
|
interface |
ExpressionSectionSet
An object that binds an expression with an entity section in the context of a list.
|
interface |
ExpressionSectionSetList
Represents a list of objects.
|
interface |
Face
Represents a face .
|
interface |
FeatureGeneralPropertiesBuilder
Represents a
FeatureGeneralPropertiesBuilder to be used for modifying
the names of features and general objects. |
interface |
FileNew
Represents a
FileNew
This class is not directly created. |
interface |
FourPointSurfaceBuilder
Represents a four point sheet body builder
To create a new instance of this class, use BodyCollection.createFourPointSurfaceBuilder() Created in NX6.0.0 |
interface |
HumanPosturePrediction
Represent posture prediction object
To create or edit an instance of this class, use HumanPosturePredictionBuilder Created in NX5.0.0 |
interface |
HumanPosturePredictionBuilder
Represents a Human Posture Prediction Builder.
|
interface |
HumanReachZone
Represents a human reach zone.
|
interface |
Hyperbola
Represents a hyperbola curve.
|
interface |
IgesCreator
Represents a
IgesCreator to be used when exporting the IGES Data
This class is created using DexManager . |
interface |
IgesImporter
Represents a
IgesImporter to be used when importing the IGES Data
This class is created using DexManager . |
interface |
Importer
Base class for importing data into the work part.
|
interface |
InferredConstraintsBuilder
Represents a
InferredConstraintsBuilder
To create a new instance of this class, use SketchCollection.createInferredConstraintsBuilder() Created in NX5.0.0 |
interface |
InfiniteLine
Represents a infinite line curve.
|
interface |
InterpartExpressionsBuilder
This class creates interpart expressions from the source part to the current work part via the naming rule defined.
|
interface |
JtCreator
Represents a
JtCreator to be used when exporting the JT Data
This class is created using PvtransManager . |
interface |
KFObject
Represents an KF object in the part.
|
interface |
Layout
Represents a layout.
|
interface |
Light
Represents a light source.
|
interface |
Line
Represents a line curve.
|
interface |
LineColorFontWidthBuilder
Represent a
LineColorFontWidthBuilder
This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0 |
interface |
LineFontBuilder
Represent a
LineFontBuilder
This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0 |
interface |
LineWidthBuilder
|
interface |
LinkedMirrorPartAttributeEditData
JA interface for LinkedMirrorPartAttributeEditData object
This cannot be created . |
interface |
LinkedMirrorPartAttributeEditEvent
JA interface for LinkedMirrorPartAttributeEditEvent object
This cannot be created . |
interface |
LinkedMirrorPartBuilder
builder class of LinkedMirrorPartBuilder
To create a new instance of this class, use PartCollection.createLinkedMirrorPartBuilder(nxopen.Part) Default values. |
interface |
LinkedMirrorPartEntityMapData
JA interface for LinkedMirrorPartEntityMapData oject
This cannot be created . |
interface |
LinkedMirrorPartEntityMapEvent
JA interface for LinkedMirrorPartEntityMapEvent object
This cannot be created . |
interface |
ListCreator
Represents a
ListCreator to be used when exporting the JT Data
This class is created using PvtransManager . |
interface |
ListCreatorList
Represents a list of objects.
|
interface |
MassPropertiesBuilder
Represents a
MassPropertiesBuilder for calculating the weight of
selected objects as well as informing the part that the assemblies weight property
data needs to be updated on save. |
interface |
Material
Represents Material
This is an abstract class . |
interface |
MeasureAngleBuilder
Represents a
MeasureAngleBuilder
To create a new instance of this class, use MeasureManager.createMeasureAngleBuilder(nxopen.NXObject) Created in NX5.0.0 |
interface |
MeasureBodyBuilder
Represents a
MeasureBodyBuilder
To create a new instance of this class, use MeasureManager.createMeasureBodyBuilder(nxopen.NXObject) Created in NX5.0.0 |
interface |
MeasureBuilder
Represents a
MeasureBuilder
This is an abstract class, and cannot be instantiated. |
interface |
MeasureDistanceBuilder
Represents a
MeasureDistanceBuilder
To create a new instance of this class, use MeasureManager.createMeasureDistanceBuilder(nxopen.NXObject) Created in NX5.0.0 |
interface |
MeasureFaceBuilder
Represents a
MeasureFaceBuilder
To create a new instance of this class, use MeasureManager.createMeasureFaceBuilder(nxopen.NXObject) Created in NX5.0.0 |
interface |
ModelingView
Represents a Modeling View
Modeling Views may only be created by Save As. |
interface |
MovieSettingsBuilder
This class is the builder for the Movie Settings.
|
interface |
NavigatorFilter
Represents a
NavigatorFilter object. |
interface |
NXMatrix
Represents an NX matrix.
|
interface |
NXObject
A base class providing low-level services for most NXOpen classes.
|
interface |
NXObjectList
Represents a list of objects.
|
interface |
NXTo2dCreator
Represents a
NXTo2dCreator to be used when exporting the 2D Data
This class is created using DexManager . |
interface |
ObjectGeneralPropertiesBuilder
Represents an
ObjectGeneralPropertiesBuilder to be used for modifying
the names and properties of objects. |
interface |
ObjectList
Represents a list of objects.
|
interface |
ObjectSelector
Represents a
ObjectSelector to be used when exporting the the selected objects
from NX part.This class is created using DexManager . |
interface |
ObjectTypeSelector
Represents a
ObjectTypeSelector to be used when filter out the objects
based on the type during import/export. |
interface |
Offset
Represents a
Offset . |
interface |
Parabola
Represents a parabola curve.
|
interface |
Part
Represents an NX part of type .prt.
|
interface |
PartImporter
Used to import a part into the work part.
|
interface |
PasteSpecialBuilder
Represents a
PasteSpecialBuilder
To create a new instance of this class, use ClipboardOperationsManager.createPasteSpecialBuilder() Default values. |
interface |
PhysicalMaterial
Represents Physical Material .
|
interface |
PhysicalMaterialBuilder
Represents a
PhysicalMaterial builder To create a new instance of this class, use PhysicalMaterialCollection.createPhysicalMaterialBuilder(nxopen.PhysicalMaterial.Type) Created in NX6.0.0 |
interface |
Plane
Represents an
Plane class. |
interface |
PlaneList
Represents a list of objects.
|
interface |
PlotBuilder
Represents a
PlotBuilder . |
interface |
PlotColorsWidthsBuilder
Represents a
PlotColorsWidthsBuilder to be used for plotting. |
interface |
PlotSourceBuilder
Represents a
PlotSourceBuilder
All sheets provided must be in the displayed part. |
interface |
Point
Represents a smart
Point . |
interface |
PointList
Represents a list of objects.
|
interface |
Polyline
Represents a polyline curve.
|
interface |
PositioningDimension
Represents a dimension object attached to the feature
Intances of this object cannot be directly be created. |
interface |
PreviewPropertiesBuilder
Represents a
PreviewPropertiesBuilder to be used for creating and storing
previews. |
interface |
PrintBuilder
Represents a
PrintBuilder . |
interface |
PrintPDFBuilder
Represents a
PrintPDFBuilder to be used when exporting the Current Display
or selected sheets to a PDF document. |
interface |
ProeImporter
Represents a
ProeImporter to be used when importing the ProE Data
This class is created using DexManager . |
interface |
ReferenceSet
|
interface |
RegionPoint
Represents a point and body context on a region point.
|
interface |
RegionPointList
Represents a list of objects.
|
interface |
RemoteUtilities
This class is primarily designed for use in a remote session, and allows client
applications to access resources on a remote server.
|
interface |
ReplaceExpressionsBuilder
This class creates Replace expressions from the source part to the current work part via the naming rule defined.
|
interface |
Scalar
Represents a scalar.
|
interface |
ScCollector
Sc Collector
To create a new instance of this class, use ScCollectorCollection.createCollector() Created in NX4.0.0 |
interface |
ScCollectorList
Represents a list of objects.
|
interface |
Section
Represents a section
Section consists of "chained_entity", a chain or a single entity of edge or curve. |
interface |
SectionList
Represents a list of objects.
|
interface |
SelectBody
Represents a single object selection.
|
interface |
SelectBodyList
Represents a list of objects on a selection list.
|
interface |
SelectCartesianCoordinateSystem
Represents a single object selection.
|
interface |
SelectCoordinateSystem
Represents a single object selection.
|
interface |
SelectCoordinateSystemList
Represents a list of objects on a selection list.
|
interface |
SelectCurve
Represents a single object selection.
|
interface |
SelectCurveList
Represents a list of objects on a selection list.
|
interface |
SelectDatumPlane
Represents a single object selection.
|
interface |
SelectDatumPlaneList
Represents a list of objects on a selection list.
|
interface |
SelectDisplayableObject
Represents a single object selection.
|
interface |
SelectDisplayableObjectList
Represents a list of objects on a selection list.
|
interface |
SelectEdge
Represents a single object selection.
|
interface |
SelectEdgeList
Represents a list of objects on a selection list.
|
interface |
SelectExpressionList
Represents a list of objects on a selection list.
|
interface |
SelectFace
Represents a single object selection.
|
interface |
SelectFaceList
Represents a list of objects on a selection list.
|
interface |
SelectIBaseCurve
Represents a single object selection.
|
interface |
SelectIBaseCurveList
Represents a list of objects on a selection list.
|
interface |
SelectIBasePlaneList
Represents a list of objects on a selection list.
|
interface |
SelectICurve
Represents a single object selection.
|
interface |
SelectICurveList
Represents a list of objects on a selection list.
|
interface |
SelectINXObjectList
Represents a list of objects on a selection list.
|
interface |
SelectIParameterizedSurface
Represents a single object selection.
|
interface |
SelectIParameterizedSurfaceList
Represents a list of objects on a selection list.
|
interface |
SelectISurface
Represents a single object selection.
|
interface |
SelectLine
Represents a single object selection.
|
interface |
SelectNXObject
Represents a single object selection.
|
interface |
SelectNXObjectList
Represents a list of objects on a selection list.
|
interface |
SelectObject
Represents a single object selection.
|
interface |
SelectObjectList
Represents a list of objects on a selection list.
|
interface |
SelectPart
Represents a single object selection.
|
interface |
SelectPartList
Represents a list of objects on a selection list.
|
interface |
SelectPlaneList
Represents a list of objects on a selection list.
|
interface |
SelectPoint
Represents a single object selection.
|
interface |
SelectPointList
Represents a list of objects on a selection list.
|
interface |
SelectSketch
Represents a single object selection.
|
interface |
SelectSmartObject
Represents a single object selection.
|
interface |
SelectSpline
Represents a single object selection.
|
interface |
SelectSplineList
Represents a list of objects on a selection list.
|
interface |
SelectTaggedObject
Represents a single object selection.
|
interface |
SelectTaggedObjectList
Represents a list of objects on a selection list.
|
interface |
SelectView
Represents a single object selection.
|
interface |
Session
Represents the NX session.
|
interface |
Sketch
Represents a sketch
Use the SketchCollection class to create a sketch. |
interface |
SketchAlongPathBuilder
Use the
SketchAlongPathBuilder to create or reattach a Sketch along a path. |
interface |
SketchAngularDimensionBuilder
Represents a
SketchAngularDimensionBuilder To create a new instance of this class, use SketchCollection.createAngularDimensionBuilder(nxopen.annotations.AngularDimension) Created in NX9.0.0 |
interface |
SketchAssociativeTrim
Represents a sketch associative trim constraint
Use SketchCollection.createSketchAssociativeTrimBuilder(nxopen.SketchAssociativeTrim) to create an instance of this class. |
interface |
SketchAssociativeTrimBuilder
Represents a
SketchAssociativeTrimBuilder
To create a new instance of this class, use SketchCollection.createSketchAssociativeTrimBuilder(nxopen.SketchAssociativeTrim) Default values. |
interface |
SketchAutoConstrainBuilder
Represents a
SketchAutoConstrainBuilder
To create a new instance of this class, use SketchCollection.createAutoConstrainBuilder() Default values. |
interface |
SketchAutoDimensionBuilder
Represents a
SketchAutoDimensionBuilder
To create a new instance of this class, use SketchCollection.createAutoDimensionBuilder() Default values. |
interface |
SketchChamferBuilder
Represents a Chamfer builder
To create a new instance of this class, use SketchCollection.createSketchChamferBuilder() Default values. |
interface |
SketchConicBuilder
Represents a
SketchConicBuilder builder
To create a new instance of this class, use SketchCollection.createSketchConicBuilder(nxopen.NXObject) Default values. |
interface |
SketchConstraint
Represents a constraint in a sketch.
|
interface |
SketchConstraintBuilder
Represents a
SketchConstraint builder To create a new instance of this class, use SketchCollection.createConstraintBuilder() Created in NX8.5.0 |
interface |
SketchCornerBuilder
Create a corner between two sketch curves.
|
interface |
SketchDimensionalConstraint
Represents a dimensional constraint
To create an instance of this class refer to Sketch Created in NX3.0.0 |
interface |
SketchDimensionBuilder
Edit the geometry references of an existing sketch dimension.
|
interface |
SketchEditDefiningSectionBuilder
Represents a
SketchEditDefiningSectionBuilder builder. |
interface |
SketchEllipseBuilder
Represents a
SketchEllipseBuilder builder
To create a new instance of this class, use SketchCollection.createSketchEllipseBuilder(nxopen.NXObject) Default values. |
interface |
SketchEvaluator
Represents a sketch-on-path evaluator.
|
interface |
SketchExpressionModifierBuilder
Represents a Sketch Expression Modifier Builder.
|
interface |
SketchG1Constraint
Represents a sketch G1 constraint
Use Features.FeatureCollection#createSketchSplineBuilder to create an instance of this class. |
interface |
SketchG2Constraint
Represents a sketch G2 constraint
Use Features.FeatureCollection#createSketchSplineBuilder to create an instance of this class. |
interface |
SketchGeometricConstraint
|
interface |
SketchHelpedDimensionalConstraint
Represents a dimensional sketch constraint that has a help point or help parameter
. |
interface |
SketchHelpedGeometricConstraint
Represents a geometric sketch constraint that has a help point or help parameter
To obtain an instance of this class, use Sketch . |
interface |
SketchInDraftingBuilder
Use the
SketchInDraftingBuilder to create a Sketch on a DraftingView or nxopen.drawings.DrawingSheet . |
interface |
SketchInPlaceBuilder
|
interface |
SketchLinearDimensionBuilder
Represents a
SketchLinearDimensionBuilder To create a new instance of this class, use SketchCollection.createLinearDimensionBuilder(nxopen.annotations.Dimension) Created in NX9.0.0 |
interface |
SketchMakeSymmetricBuilder
This class is used to add symmetric contraint to objects from a
SketchMakeSymmetricBuilder . |
interface |
SketchMirrorBuilder
This class is used to create a set of mirrored curves from a
SketchMirrorBuilder . |
interface |
SketchMirrorPatternBuilder
Represents a
SketchMirrorPatternBuilder
To create a new instance of this class, use SketchCollection.createSketchMirrorPatternBuilder(nxopen.SketchPattern) Default values. |
interface |
SketchOffset
Represents a sketch offset constraint
Use SketchCollection.createSketchOffsetBuilder(nxopen.SketchOffset) to create an instance of this class. |
interface |
SketchOffsetBuilder
Represents a
SketchOffsetBuilder
To create a new instance of this class, use SketchCollection.createSketchOffsetBuilder(nxopen.SketchOffset) Default values. |
interface |
SketchPasteBuilder
Represents a
SketchPasteBuilder To create a new instance of this class, use SketchCollection.createSketchPasteBuilder(nxopen.Sketch[]) Default values. |
interface |
SketchPattern
Represents a sketch pattern constraint
Use SketchCollection.createSketchPatternBuilder(nxopen.SketchPattern) to create an instance of this class. |
interface |
SketchPatternBuilder
Represents a
SketchPatternBuilder
To create a new instance of this class, use SketchCollection.createSketchPatternBuilder(nxopen.SketchPattern) Default values. |
interface |
SketchPolygon
Represents a polygon constraint in a sketch
To create or edit an instance of this class, use SketchPolygonBuilder Created in NX7.5.0 |
interface |
SketchPolygonBuilder
Represents a
SketchPolygon builder To create a new instance of this class, use SketchCollection.createSketchPolygonBuilder(nxopen.SketchPolygon) Default values. |
interface |
SketchProjectBuilder
Represents a
SketchProjectBuilder builder
To create a new instance of this class, use SketchCollection.createProjectBuilder(nxopen.features.Feature) Default values. |
interface |
SketchQuickExtendBuilder
Represents a
SketchQuickExtendBuilder
To create a new instance of this class, use SketchCollection.createQuickExtendBuilder() Default values. |
interface |
SketchQuickTrimBuilder
Represents a
SketchQuickTrimBuilder
To create a new instance of this class, use SketchCollection.createQuickTrimBuilder() Default values. |
interface |
SketchRadialDimensionBuilder
Represents a
SketchRadialDimensionBuilder To create a new instance of this class, use SketchCollection.createRadialDimensionBuilder(nxopen.annotations.Dimension) Created in NX9.0.0 |
interface |
SketchRapidDimensionBuilder
Represents a
SketchRapidDimensionBuilder To create a new instance of this class, use SketchCollection.createRapidDimensionBuilder() Created in NX9.0.0 |
interface |
SketchTangentConstraint
Represents a tangent constraint
To create an instance of this object use Sketch.createTangentConstraint(nxopen.Sketch.ConstraintGeometry, nxopen.Sketch.ConstraintGeometryHelp, nxopen.Sketch.ConstraintGeometry, nxopen.Sketch.ConstraintGeometryHelp) Created in NX3.0.0 |
interface |
SmartObject
Represents a smart object.
|
interface |
SphericalCoordinateSystem
Represents a cylindrical coordinate system
To create a new instance of this class, use CoordinateSystemCollection.createSphericalCoordinateSystem(nxopen.Point3d, nxopen.Vector3d, nxopen.Vector3d) Created in NX4.0.0 |
interface |
Spline
Represents a spline curve.
|
interface |
Step203Creator
Represents a
Step203Creator to be used when exporting the STEP203 Data
This class is created using DexManager . |
interface |
Step203Importer
Represents a
Step203Importer to be used when importing the STEP203 Data
This class is created using DexManager . |
interface |
Step214Creator
Represents a
Step214Creator to be used when exporting the STEP214 Data
This class is created using DexManager . |
interface |
Step214Importer
Represents a
Step214Importer to be used when importing the STEP214 Data
This class is created using DexManager . |
interface |
STLImporter
Used to import an STL file into the work part.
|
interface |
SubdivisionMeshBody
Represents a subdivision mesh.
|
interface |
SubdivisionMeshEdge
Represents a subdivision mesh edge.
|
interface |
SubdivisionMeshFace
Represents a subdivision mesh face.
|
interface |
SubdivisionMeshVertex
Represents a subdivision mesh vertex.
|
interface |
SuppressByExpressionBuilder
Represents a
SuppressByExpressionBuilder
To create a new instance of this class, use ExpressionCollection.createSuppressByExpressionBuilder() Default values. |
interface |
SurfaceUVDirectionBuilder
Represents an edit surface u/v direction builder that allows reversing or swapping parametric directions.
|
interface |
SymbolFont
Represents a symbol font
This class cannot be created, but an instance can be obtained from Annotations.AnnotationManager#loadSymbolFontFromSbfFile . |
interface |
TableEditorDefaultDataProvider
Provides basic data for a Table Editor block.
|
interface |
TaggedObjectList
Represents a list of objects.
|
interface |
TextColorFontWidthBuilder
Represent a
TextColorFontWidthBuilder
This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0 |
interface |
Traceline
Represents a traceline.
|
interface |
UFSession
Represents the UFSession
|
interface |
UI
This class contains the various elements that represent the NX User Interface.
|
interface |
Unit
|
interface |
Validation
Represents an NX
Validation object. |
interface |
View
Represents a view.
|
interface |
VRMLImporter
Used to import a VRML file into the work part.
|
interface |
WidthDefinition
Represents a
WidthDefinition , which is a representation of an NX width
palette. |
interface |
Xform
Represents a smart xform
To create a new instance of this class, use XformCollection.createXform(nxopen.Point3d, nxopen.Vector3d, nxopen.Vector3d, nxopen.SmartObject.UpdateOption, double) Created in NX3.0.0 |
Modifier and Type | Field and Description |
---|---|
TaggedObject |
Selection.SelectTaggedObjectData.object
The selected object
|
TaggedObject[] |
Selection.SelectTaggedObjectsData.objectArray
The selected objects
|
TaggedObject |
SelectTaggedObject.ValueData.selection
selected object
|
TaggedObject |
SelectTaggedObject.ValueWithCaeSetObjectInfoData.selection
selected object
|
TaggedObject |
SelectObject.ValueData.selection
selected object
|
TaggedObject |
SelectObject.ValueWithCaeSetObjectInfoData.selection
selected object
|
TaggedObject |
SelectTaggedObject.ValueWithSnapData.selection1
first selected object
|
TaggedObject |
SelectObject.ValueWithSnapData.selection1
first selected object
|
TaggedObject |
SelectTaggedObject.ValueWithSnapData.selection2
second selected object
|
TaggedObject |
SelectObject.ValueWithSnapData.selection2
second selected object
|
Modifier and Type | Method and Description |
---|---|
TaggedObject[] |
Selection.askSelectionTaggedObjectList(SelectionHandle select)
Returns the number of tagged objects selected and a pointer to an array of
tags of the objects selected.
|
TaggedObject |
CollaborativeDesignCollection.find(String journalIdentifier)
Finds the
TaggedObject with the given identifier as recorded in a journal. |
TaggedObject[] |
PhysicalMaterialCollection.findBodiesWithoutMaterial()
Returns the bodies that don't have a material assigned.
|
TaggedObject[] |
PhysicalMaterialCollection.findBodiesWithoutPreferredMaterial()
Returns the bodies that are not using the preferred material (either no material assigned or the non-preferred a different material assigned).
|
TaggedObject |
TaggedObjectList.findItem(int index)
Returns the object at the input index.
|
TaggedObject |
ObjectList.findItem(int index)
Returns the object at the input index.
|
TaggedObject |
TaggedObjectManager.get(Tag tag)
Returns the object with the corresponding tag
|
TaggedObject[] |
SelectTaggedObjectList.getArray()
Returns the list of objects in the selection list.
|
TaggedObject[] |
SelectObjectList.getArray()
Returns the list of objects in the selection list.
|
TaggedObject[] |
TaggedObjectList.getContents()
Gets the contents of the entire list
License requirements: None. |
TaggedObject[] |
ObjectList.getContents()
Gets the contents of the entire list
License requirements: None. |
TaggedObject[] |
LinkedMirrorPartEntityMapData.getMappedMirrorPartEntities()
The list of mapped entities in the mirror part
License requirements: None. |
TaggedObject[] |
LinkedMirrorPartEntityMapData.getMappedSourcePartEntities()
The list of mapped entities in the source part
License requirements: None. |
TaggedObject[] |
LinkedMirrorPartEntityMapData.getMirrorPartEntitiesToMap()
The list of entities in the mirror part that are yet to be mapped
License requirements: None. |
TaggedObject[] |
ScCollector.getObjects()
Returns the contents of a collector.
|
TaggedObject[] |
SelectionMethod.getSelectedObjects()
Returns the objects selected by this
SelectionMethod . |
TaggedObject |
Selection.getSelectedTaggedObject(int index)
Returns the n'th tagged object on the selection list
License requirements: None. |
TaggedObject[] |
LinkedMirrorPartEntityMapData.getSourcePartEntitiesToMap()
The list of entities in the source part that are yet to be mapped
License requirements: None. |
TaggedObject |
PropertyContainer.getTaggedObject(int propertyIndex)
Gets the tagged object for the given index.
|
TaggedObject |
PropertyContainer.getTaggedObject(String propertyName)
Gets the tagged object for the given property name.
|
TaggedObject[] |
PropertyContainer.getTaggedObjectVector(int propertyIndex)
Gets the tagged object vector for the given index.
|
TaggedObject[] |
PropertyContainer.getTaggedObjectVector(String propertyName)
Gets the tagged object vector for the given property name.
|
TaggedObject |
SelectTaggedObject.value()
Returns the object being selected
License requirements: None. |
TaggedObject |
SelectObject.value()
Returns the object being selected
License requirements: None. |
Modifier and Type | Method and Description |
---|---|
boolean |
SelectTaggedObjectList.add(TaggedObject object)
Adds an object to the list
License requirements: None. |
boolean |
SelectObjectList.add(TaggedObject object)
Adds an object to the list
License requirements: None. |
boolean |
SelectTaggedObjectList.add(TaggedObject[] objects)
Adds a set of objects to the list
License requirements: None. |
boolean |
SelectObjectList.add(TaggedObject[] objects)
Adds a set of objects to the list
License requirements: None. |
boolean |
SelectTaggedObjectList.add(TaggedObject selection,
View view,
Point3d point)
Adds the object with the objects view and objects point
License requirements: None. |
boolean |
SelectObjectList.add(TaggedObject selection,
View view,
Point3d point)
Adds the object with the objects view and objects point
License requirements: None. |
void |
DataContainer.addTaggedObject(String propertyName,
TaggedObject taggedSc)
Adds the tagged object in the container.
|
void |
DataContainer.addTaggedObjectVector(String propertyName,
TaggedObject[] tagVector)
Adds the tagged object vector in the container.
|
void |
LinkedMirrorPartEntityMapData.addToMap(TaggedObject sourceEntity,
TaggedObject mirrorEntity)
Add a map between an entity in the source part and an entity in the mirror part
License requirements: None. |
void |
Selection.addToTaggedObjectsSelectionList(SelectionHandle select,
TaggedObject[] objs,
boolean highlightFlag)
Add objects to the selection list.
|
void |
TaggedObjectList.append(TaggedObject object)
Appends an object to the list
License requirements: None. |
void |
ObjectList.append(TaggedObject object)
Appends an object to the list
License requirements: None. |
void |
TaggedObjectList.append(TaggedObject[] objects)
Appends a set of objects to the list
License requirements: None. |
void |
ObjectList.append(TaggedObject[] objects)
Appends a set of objects to the list
License requirements: None. |
void |
Session.assignRemoveProjectsBasedOnPartOccs(TaggedObject[] partOccs,
Session.ProjectAssignmentObjectType[] objectTypes,
String[] projectNames,
Session.ProjectAssignmentState[] assignmentStates)
Assign or remove projects to/from CPD objects
License requirements: None. |
boolean |
SelectTaggedObjectList.contains(TaggedObject object)
Returns whether the specified object is already in the list or not.
|
boolean |
SelectObjectList.contains(TaggedObject object)
Returns whether the specified object is already in the list or not.
|
Point |
PointCollection.createPointOnSectionCG(SmartObject.UpdateOption updateOption,
TaggedObject face)
Creates a
Point on the center of gravity of the sketch for a given sheet metal feature face
in history free mode. |
Point |
PointCollection.createPointOnSurfaceAxis(TaggedObject face,
Scalar parameter,
SmartObject.UpdateOption updateOption)
Creates a parameterised point on the center line axis of the given face.
|
void |
TaggedObjectList.erase(TaggedObject obj)
Erases the object from the list, but does not delete the object.
|
void |
ObjectList.erase(TaggedObject obj)
Erases the object from the list, but does not delete the object.
|
void |
TaggedObjectList.erase(TaggedObject obj,
ObjectList.DeleteOption deleteOption)
Erases the object from the list.
|
void |
ObjectList.erase(TaggedObject obj,
ObjectList.DeleteOption deleteOption)
Erases the object from the list.
|
int |
Selection.FilterTaggedObjectCallback.filterTaggedObjectCallback(TaggedObject entity,
Selection.MaskTriple entityMask,
SelectionHandle selectHandle)
It is an optional callback which the user can provide to perform
application specific filtering when selecting tagged objects.
|
int |
TaggedObjectList.findIndex(TaggedObject obj)
Finds the index where the input object appears.
|
int |
ObjectList.findIndex(TaggedObject obj)
Finds the index where the input object appears.
|
String[] |
Session.getNamedProperties(TaggedObject object)
Gets a list of the named properties of this object
License requirements: None. |
String |
Session.getProperty(TaggedObject object,
String propertyName)
Gets a named property of the object.
|
void |
TaggedObjectList.insert(int location,
TaggedObject object)
Inserts an object at the specified location
License requirements: None. |
void |
ObjectList.insert(int location,
TaggedObject object)
Inserts an object at the specified location
License requirements: None. |
boolean |
Selection.isObjectInSelectionList(SelectionHandle select,
TaggedObject object)
Inquires if object is selected.
|
boolean |
SelectTaggedObjectList.remove(InferSnapType.SnapType snapType,
TaggedObject selection1,
View view1,
Point3d point1,
TaggedObject selection2,
View view2,
Point3d point2)
Remove specified object from list.
|
boolean |
SelectObjectList.remove(InferSnapType.SnapType snapType,
TaggedObject selection1,
View view1,
Point3d point1,
TaggedObject selection2,
View view2,
Point3d point2)
Remove specified object from list.
|
boolean |
SelectTaggedObjectList.remove(TaggedObject object)
Remove specified object from list.
|
boolean |
SelectObjectList.remove(TaggedObject object)
Remove specified object from list.
|
boolean |
SelectTaggedObjectList.remove(TaggedObject object,
View view)
Remove specified object from list.
|
boolean |
SelectObjectList.remove(TaggedObject object,
View view)
Remove specified object from list.
|
boolean |
SelectTaggedObjectList.removeArray(TaggedObject[] objects)
Remove specified objects from list.
|
boolean |
SelectObjectList.removeArray(TaggedObject[] objects)
Remove specified objects from list.
|
void |
Selection.removeTaggedObjectsFromSelectionList(SelectionHandle select,
TaggedObject[] objs,
boolean unhighlight)
Removes tagged objects from the selection list.
|
void |
SelectTaggedObjectList.setArray(TaggedObject[] objects)
Sets the list of objects in the selection list.
|
void |
SelectObjectList.setArray(TaggedObject[] objects)
Sets the list of objects in the selection list.
|
void |
TaggedObjectList.setContents(TaggedObject[] objects)
Sets the contents of the entire list.
|
void |
ObjectList.setContents(TaggedObject[] objects)
Sets the contents of the entire list.
|
void |
NXTo2dCreator.setDrawingArray(TaggedObject[] objects)
Sets the drawing - sets the list of drawings to translate
License requirements: None. |
void |
IgesCreator.setDrawingArray(TaggedObject[] objects)
Sets the drawings - the list of drawings to translate
License requirements: None. |
void |
Session.setProperty(TaggedObject object,
String propertyName,
String value)
Sets a named property of the object.
|
void |
PropertyContainer.setTaggedObject(String propertyName,
TaggedObject taggedSc)
Sets the tagged object for the given property name.
|
void |
PropertyContainer.setTaggedObjectVector(String propertyName,
TaggedObject[] tagVector)
Sets the tagged object vector for the given property name.
|
void |
SelectTaggedObject.setValue(TaggedObject selection)
Sets the object being selected
License requirements: None. |
void |
SelectObject.setValue(TaggedObject selection)
Sets the object being selected
License requirements: None. |
void |
SelectTaggedObject.setValue(TaggedObject selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
void |
SelectObject.setValue(TaggedObject selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
boolean |
SelectTaggedObjectList.setValueWithCaeSetObjectInfo(TaggedObject selection,
CaeObjectType.CaeSubType caeSubType,
int caeSubId)
Deprecated.
Deprecated in NX10.0.0. Use other versions of
SelectObjectList.add(nxopen.TaggedObject) .
|
void |
SelectTaggedObject.setValueWithCaeSetObjectInfo(TaggedObject selection,
CaeObjectType.CaeSubType caeSubType,
int caeSubId)
Deprecated.
Deprecated in NX10.0.0. Use other versions of
SelectObject.setValue(nxopen.TaggedObject) .
|
boolean |
SelectObjectList.setValueWithCaeSetObjectInfo(TaggedObject selection,
CaeObjectType.CaeSubType caeSubType,
int caeSubId)
Deprecated.
Deprecated in NX10.0.0. Use other versions of
SelectObjectList.add(nxopen.TaggedObject) .
|
void |
SelectObject.setValueWithCaeSetObjectInfo(TaggedObject selection,
CaeObjectType.CaeSubType caeSubType,
int caeSubId)
Deprecated.
Deprecated in NX10.0.0. Use other versions of
SelectObject.setValue(nxopen.TaggedObject) .
|
boolean |
SelectTaggedObjectList.setValueWithSnap(InferSnapType.SnapType snapType,
TaggedObject selection1,
View view1,
Point3d point1,
TaggedObject selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectTaggedObject.setValueWithSnap(InferSnapType.SnapType snapType,
TaggedObject selection1,
View view1,
Point3d point1,
TaggedObject selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
boolean |
SelectObjectList.setValueWithSnap(InferSnapType.SnapType snapType,
TaggedObject selection1,
View view1,
Point3d point1,
TaggedObject selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectObject.setValueWithSnap(InferSnapType.SnapType snapType,
TaggedObject selection1,
View view1,
Point3d point1,
TaggedObject selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
TaggedObjectList.swap(TaggedObject object1,
TaggedObject object2)
Exchanges the position of two objects inside the list.
|
void |
ObjectList.swap(TaggedObject object1,
TaggedObject object2)
Exchanges the position of two objects inside the list.
|
int |
Selection.TaggedObjectSelectionCallback.taggedObjectSelectionCallback(TaggedObject[] selectedObjects,
TaggedObject[] deselectedObjects,
SelectionHandle selectHandle)
It is an optional callback which the user can provide to customize his selection of tagged objects
License requirements: None. |
int |
Selection.TaggedObjectSelectionCallback.taggedObjectSelectionCallback(TaggedObject[] selectedObjects,
TaggedObject[] deselectedObjects,
SelectionHandle selectHandle)
It is an optional callback which the user can provide to customize his selection of tagged objects
License requirements: None. |
Modifier and Type | Interface and Description |
---|---|
interface |
AddTicBuilder
Represents a
AddTicBuilder . |
interface |
AngularDimensionBuilder
Represents a
AngularDimension builder This is an abstract class and cannot be instantiated. |
interface |
AnnotationPlacement
Represents an object that journals the adding of a leader and setting of the origin
for dialogs that use a builder .
|
interface |
AppendedTextBuilder
This class is used to set/access the appended text of a dimension
This is a sub-builder class and cannot be directly instantiated . |
interface |
AppendedTextEditorBuilder
Represents a
AppendedTextEditorBuilder builder To create a new instance of this class, use DimensionCollection.createAppendedTextEditorBuilder(nxopen.annotations.Dimension) Created in NX9.0.0 |
interface |
ArbitraryAreaSeedBuilder
Represents a
ArbitraryAreaSeedBuilder
To create a new instance of this class, use PmiManager.createArbitraryAreaSeedBuilder() Created in NX6.0.0 |
interface |
ArbitraryAreaSeedBuilderList
Represents a list of objects.
|
interface |
AssociateDimensionBuilder
Represents a
AssociateDimensionBuilder
To create a new instance of this class, use AnnotationManager.createAssociateDimensionBuilder(nxopen.annotations.Dimension) Created in NX5.0.0 |
interface |
AssociatedObjectsBuilder
The associated objects builder is used to store objects which annotations are associated to .
|
interface |
AssociatedObjectsSetsBuilder
The associated objects sets builder is used to store lists of objects which annotations are associated to .
|
interface |
AssociativityBuilder
Represents a
AssociativityBuilder
To create a new instance of this class, use AnnotationManager.createAssociativityBuilder(nxopen.annotations.Dimension, int) Created in NX5.0.0 |
interface |
AutomaticCenterlineBuilder
Builder for creating Automatic Centerlines
To create a new instance of this class, use CenterlineCollection.createAutomaticCenterlineBuilder() Default values. |
interface |
BalloonNoteBuilder
Represents a
BalloonNote builder To create a new instance of this class, use PmiAttributeCollection.createBalloonNoteBuilder(nxopen.annotations.BalloonNote) Created in NX6.0.0 |
interface |
BaseAngularDimensionBuilder
Represents a
AngularDimension builder This is an abstract class and cannot be instantiated. |
interface |
BaseCenterline3dBuilder
Represents a Base Centerline3d Builder for pmi and drafting 3D centerlines
This is an abstract class, and cannot be instantiated. |
interface |
BaseCenterMarkBuilder
Represents a Base CenterMark Builder for Pmi and Drafting centermark
This is an abstract class, and cannot be instantiated. |
interface |
BaseChamferDimensionBuilder
Represents a
BaseChamferDimension builder This is an abstract class and cannot be instantiated. |
interface |
BaseCurveLengthDimensionBuilder
Represents a
BaseArcLengthDimension builder This is an abstract class and cannot be instantiated. |
interface |
BaseCustomSymbolBuilder
Represents a base Builder for Drafting and PMI Custom Symbol
This is an abstract class, and cannot be instantiated. |
interface |
BaseFrameBarBuilder
Represents a
BaseFrameBarBuilder . |
interface |
BaseLinearDimensionBuilder
Represents a
Dimension builder This is an abstract class and cannot be instantiated. |
interface |
BaseOrdinateDimensionBuilder
Represents a
OrdinateDimension builder This is an abstract class and cannot be instantiated. |
interface |
BaseRadialDimensionBuilder
Represents a
Dimension builder This is an abstract class and cannot be instantiated. |
interface |
BaseRapidDimensionBuilder
Represents a
Dimension builder This is an abstract class and cannot be instantiated. |
interface |
BaseSurfaceFinishBuilder
Represents a
BaseSurfaceFinish builder This is an abstract class, and cannot be instantiated. |
interface |
BaseSymbolBuilder
Represents a Base Symbol Builder
This is an abstract class, and cannot be instantiated. |
interface |
BaseThicknessDimensionBuilder
Represents a
BaseThicknessDimensionBuilder builder This is an abstract class and cannot be instantiated. |
interface |
BaseTitleBlockBuilder
Represents a
BaseTitleBlockBuilder builder. |
interface |
BillOfMaterialBuilder
Builder for Bill of Material functionality used in Routing.
|
interface |
BoltCircleCenterlineBuilder
Represents a BoltCircleCenterlineBuilder Builder
To create a new instance of this class, use CenterlineCollection.createBoltCircleCenterlineBuilder(nxopen.annotations.BoltCircleCenterline) Default values. |
interface |
BoundaryBuilder
This builder contains the boundaries that define a crosshatch pattern .
|
interface |
BreakSettingsBuilder
|
interface |
BusinessModifier
Represents a business modifier object.
|
interface |
Centerline2dBuilder
Builder for creating 2D Centerline.
|
interface |
Centerline2dSettingsBuilder
Represents a Builder for Centerline2dSettings.
|
interface |
Centerline3dBuilder
Builder for creating 3D Centerline.
|
interface |
Centerline3dSettingsBuilder
Represents a Builder for Centerline3dSettings.
|
interface |
CenterlineBuilder
Represents a Base Centerline Builder for all types of centerlines
This is an abstract class, and cannot be instantiated. |
interface |
CenterlineSettingsBuilder
Represents a Builder for Centerline Settings.
|
interface |
CenterMarkBuilder
Builder for creating Center Mark.
|
interface |
CenterMarkSettingsBuilder
Represents a Builder for CenterMark Settings.
|
interface |
ChamferDimensionBuilder
Represents a
ChamferDimension builder To create a new instance of this class, use DimensionCollection.createChamferDimensionBuilder(nxopen.annotations.BaseChamferDimension) Created in NX9.0.0 |
interface |
CircleCenterlineBuilder
Represents a CircleCenterline Builder
This is an abstract class. |
interface |
CircleCenterlineSettingsBuilder
Represents a Builder for Circle Centerline Settings .
|
interface |
CircularCenterlineBuilder
Represents a CircularCenterlineBuilder Builder
To create a new instance of this class, use CenterlineCollection.createCircularCenterlineBuilder(nxopen.annotations.CircularCenterline) Default values. |
interface |
CommonWorkflowBuilder
|
interface |
CompanyProprietaryInformationBuilder
Represents a
CompanyProprietaryInformation builder To create a new instance of this class, use PmiAttributeCollection.createCompanyProprietaryInformationBuilder(nxopen.annotations.CompanyProprietaryInformation) Created in NX6.0.0 |
interface |
CompoundDatumReferenceBuilder
Represents a
CompoundDatumReferenceBuilder
To create a new instance of this class, use AnnotationManager.createCompoundDatumReferenceBuilder() Created in NX6.0.0 |
interface |
CoordinateNoteBuilder
Represents a
CoordinateNote builder To create a new instance of this class, use PmiAttributeCollection.createCoordinateNoteBuilder(nxopen.annotations.CoordinateNote) Default values. |
interface |
CurveLengthDimensionBuilder
Represents a
ArcLengthDimension builder To create a new instance of this class, use DimensionCollection.createCurveLengthDimensionBuilder(nxopen.annotations.BaseArcLengthDimension) Created in NX9.0.0 |
interface |
CustomerValueBusinessModifier
Represents business modifier that applies customer values such as CTQ (Critical To Quality),
KC (Key Characteristic) to a PMI.
|
interface |
CustomerValueBusinessModifierBuilder
Represents a
CustomerValueBusinessModifier builder To create a new instance of this class, use BusinessModifierCollection.createCustomerValueBusinessModifierBuilder(nxopen.annotations.CustomerValueBusinessModifier) Created in NX6.0.0 |
interface |
CustomSymbolLeaderBuilder
This class is responsible for defining the origin and leader for custom
symbol objects.
|
interface |
CuttingPlaneSymbolBuilder
Represents a
CuttingPlaneSymbolBuilder
This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0 |
interface |
DatumFeatureSymbolBuilder
Represents a Base Datum Feature Symbol Builder for all types of datum feature symbols
This is an abstract class, and cannot be instantiated. |
interface |
DatumReferenceBuilder
Represents a
DatumReferenceBuilder
To create a new instance of this class, use AnnotationManager.createEmptyDatumReferenceBuilder() Created in NX6.0.0 |
interface |
DatumReferenceBuilderList
Represents a list of objects.
|
interface |
DatumTargetBuilder
Represents a Datum target Builder
This is an abstract class, and cannot be instantiated. |
interface |
DefineTitleBlockBuilder
Represents a
DefineTitleBlockBuilder . |
interface |
DimensionMeasurementBuilder
Represents a
DimensionMeasurementBuilder
This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0 |
interface |
DimensionSetBuilder
Represents a
DimensionSetBuilder
This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0 |
interface |
DimensionStyleBuilder
Represents a
DimensionStyleBuilder . |
interface |
DimensionWorkflowBuilder
Represents a Annotations WorkFlowBuilder.
|
interface |
DraftingCustomSymbolBuilder
Represents builder for Drafting Custom Symbol
To create a new instance of this class, use CustomSymbolCollection.createDraftingCustomSymbolBuilder(nxopen.annotations.CustomSymbol) Created in NX7.5.0 |
interface |
DraftingDatumFeatureSymbolBuilder
datum feature symbol builder
To create a new instance of this class, use GdtDatumCollection.createDraftingDatumFeatureSymbolBuilder(nxopen.annotations.DraftingDatum) Created in NX6.0.0 |
interface |
DraftingDatumTargetBuilder
Represents a
DraftingDatumTargetBuilder
To create a new instance of this class, use AnnotationManager.createDraftingDatumTargetBuilder(nxopen.annotations.DraftingDatumTarget) Default values. |
interface |
DraftingFeatureControlFrameBuilder
Represents a
DraftingFeatureControlFrameBuilder
To create a new instance of this class, use AnnotationManager.createDraftingFeatureControlFrameBuilder(nxopen.annotations.Gdt) Default values. |
interface |
DraftingNoteBuilder
Represents a
Note builder To create a new instance of this class, use AnnotationManager.createDraftingNoteBuilder(nxopen.annotations.SimpleDraftingAid) Default values. |
interface |
DraftingSurfaceFinishBuilder
Represents a
DraftingSurfaceFinish builder To create a new instance of this class, use DraftingSurfaceFinishCollection.createDraftingSurfaceFinishBuilder(nxopen.annotations.DraftingSurfaceFinish) Created in NX7.5.0 |
interface |
DrawingFormatTitleBuilder
|
interface |
DrivingValueBuilder
.
|
interface |
EditLeaderBuilder
Represents a builder that provides an interface to adding and editing leaders
to table entities
To create a new instance of this class, use AnnotationManager.createEditLeaderBuilder(nxopen.DisplayableObject) Created in NX6.0.1 |
interface |
EditSettingsBuilder
the edit settings builder
To create a new instance of this class, use SettingsManager.createAnnotationEditSettingsBuilder(nxopen.DisplayableObject[]) Created in NX9.0.0 |
interface |
EditSymbolDisplayBuilder
Represents a EditSymbolPieces builder
To create a new instance of this class, use CustomSymbolCollection.editSymbolDisplayBuilder(nxopen.annotations.BaseCustomSymbol) Default values. |
interface |
EditTitleBlockBuilder
Represents a
EditTitleBlockBuilder builder To create a new instance of this class, use TitleBlockCollection.createEditTitleBlockBuilder(nxopen.annotations.TitleBlock[]) Created in NX8.0.0 |
interface |
EnterpriseIdentificationBuilder
Represents a
EnterpriseIdentification builder To create a new instance of this class, use PmiAttributeCollection.createEnterpriseIdentificationBuilder(nxopen.annotations.EnterpriseIdentification) Created in NX6.0.0 |
interface |
ExportControlBuilder
Represents a
ExportControl builder To create a new instance of this class, use PmiAttributeCollection.createExportControlBuilder(nxopen.annotations.ExportControl) Created in NX6.0.0 |
interface |
FcfDatumReference
|
interface |
FeatureControlFrameBuilder
Represents a
FeatureControlFrameBuilder
This is an abstract class, and cannot be instantiated. |
interface |
FeatureControlFrameData
|
interface |
FeatureControlFrameDataBuilder
Represents a FeatureControlFrameDataBuilder
.
|
interface |
FeatureControlFrameDataBuilderList
Represents a list of objects.
|
interface |
FeatureIdBusinessModifier
Represents buiness modifier that indicates a featire identification PMI object.
|
interface |
FeatureIdBusinessModifierBuilder
Represents a
FeatureIdBusinessModifier builder To create a new instance of this class, use BusinessModifierCollection.createFeatureIdBusinessModifierBuilder(nxopen.annotations.FeatureIdBusinessModifier) Created in NX6.0.0 |
interface |
ForeshorteningSymbolBuilder
Represents a
ForeshorteningSymbolBuilder builder There is no KF creator for this class. |
interface |
ForeshorteningSymbolSettingsBuilder
|
interface |
FrameBarBuilder
Represents a
FrameBarBuilder . |
interface |
FrameBarElementStyleBuilder
Represents a
FrameBarElementStyleBuilder . |
interface |
FrameBarStyleBuilder
Represents a
FrameBarStyleBuilder . |
interface |
GeneralNoteBuilder
Represents a
GeneralNote builder To create a new instance of this class, use PmiAttributeCollection.createGeneralNoteBuilder(nxopen.annotations.GeneralNote) Created in NX6.0.0 |
interface |
GeodesicDimensionBuilder
Represents a
Annotations.Dimension builder To create a new instance of this class, use DimensionCollection.createGeodesicDimensionBuilder(nxopen.annotations.Dimension) Created in NX10.0.0 |
interface |
GovernmentSecurityInformationBuilder
Represents a
GovernmentSecurityInformation builder To create a new instance of this class, use PmiAttributeCollection.createGovernmentSecurityInformationBuilder(nxopen.annotations.GovernmentSecurityInformation) Created in NX6.0.0 |
interface |
HatchBuilder
This class is used to construct the crosshatching that lies within a boundary.
|
interface |
HatchFillSettingsBuilder
This class is used to construct the Crosshatch and area Fill setting block .
|
interface |
HatchStyleBuilder
Represents a
HatchStyleBuilder . |
interface |
HoleCalloutSettingsBuilder
Represents a
HoleCalloutSettingsBuilder , this builder contains list(s) of parameter(s) for feature(s). |
interface |
HoleTableSettingsContentBuilder
|
interface |
HoleTableSettingsFormatBuilder
|
interface |
HoleTableSettingsHoleFiltersBuilder
|
interface |
HoleTableSettingsLabelBuilder
|
interface |
HoleTableSettingsWorkflowBuilder
|
interface |
HorizontalOrdinateMargin
Represents a horizontal ordinate margin .
|
interface |
IdSymbolBuilder
Represents a
IdSymbol builder To create a new instance of this class, use IdSymbolCollection.createIdSymbolBuilder(nxopen.annotations.IdSymbol) Default values. |
interface |
ImportAutocadBlockBuilder
Represents a builder allowing import of AutoCAD blocks.
|
interface |
ImportSymbolBuilder
Represents a builder allowing import of one or many foreign symbols.
|
interface |
IntersectionSymbolBuilder
Represents a
IntersectionSymbol builder To create a new instance of this class, use IntersectionSymbolCollection.createIntersectionSymbolBuilder(nxopen.annotations.IntersectionSymbol) Default values. |
interface |
LeaderBuilder
Represents a
LeaderBuilder . |
interface |
LeaderData
Represents a
LeaderData . |
interface |
LeaderDataList
Represents a list of objects.
|
interface |
LetteringStyleBuilder
Represents a
LetteringStyleBuilder . |
interface |
LightweightSection
Represents a PMI Lightweight Section
To create or edit an instance of this class, use LightweightSectionBuilder Created in NX7.5.0 |
interface |
LightweightSectionBuilder
Represents a
LightweightSection builder To create a new instance of this class, use PmiLightweightSectionCollection.createLightweightSectionBuilder(nxopen.annotations.LightweightSection) Default values. |
interface |
LightweightSectionView
Represents a PMI Lightweight Section View
Created with LightweightSection . |
interface |
LinearDimensionBuilder
Represents a
Annotations.Dimension builder To create a new instance of this class, use DimensionCollection.createLinearDimensionBuilder(nxopen.annotations.Dimension) Created in NX9.0.0 |
interface |
LineArrowStyleBuilder
Represents a
LineArrowStyleBuilder . |
interface |
LineWeldBuilder
Represents a
LineWeldBuilder To create a new instance of this class, use WeldCollection.createLineWeldBuilder(nxopen.annotations.LineWeld) Default values. |
interface |
LineWeldDataBuilder
|
interface |
ListBusinessModifier
Represents a base class for list based business modifiers .
|
interface |
LocatorDesignatorBuilder
Represents a
LocatorDesignator builder To create a new instance of this class, use PmiAttributeCollection.createLocatorDesignatorBuilder(nxopen.annotations.LocatorDesignator) Created in NX6.0.0 |
interface |
MajorAngularDimensionBuilder
Represents a
AngularDimension builder To create a new instance of this class, use DimensionCollection.createMajorAngularDimensionBuilder(nxopen.annotations.MajorAngularDimension) Created in NX9.0.0 |
interface |
MasterCustomSymbol
Represents a custom symbol .
|
interface |
MasterSymbol
Represents a part symbol folder
To create or edit an instance of this class, use MasterSymbolBuilder Created in NX7.5.0 |
interface |
MasterSymbolBuilder
Represents a Builder for MasterSymbol functionality
To create a new instance of this class, use CustomSymbolCollection.createMasterSymbolBuilder(nxopen.annotations.MasterSymbol) Default values. |
interface |
MasterSymbolListItemBuilder
Represents a
MasterSymbolListItemBuilder
To create a new instance of this class, use CustomSymbolCollection.createMasterSymbolListItemBuilder() Created in NX7.5.0 |
interface |
MasterSymbolListItemBuilderList
Represents a list of objects.
|
interface |
MaterialSpecificationBuilder
Represents a
MaterialSpecification builder To create a new instance of this class, use PmiAttributeCollection.createMaterialSpecificationBuilder(nxopen.annotations.MaterialSpecification) Created in NX6.0.0 |
interface |
MinorAngularDimensionBuilder
Represents a
Annotations.AngularDimension builder To create a new instance of this class, use DimensionCollection.createMinorAngularDimensionBuilder(nxopen.annotations.MinorAngularDimension) Created in NX9.0.0 |
interface |
OffsetCenterPointBuilder
Represents a
OffsetCenterPoint builder To create a new instance of this class, use OffsetCenterPointCollection.createOffsetCenterPointBuilder(nxopen.annotations.OffsetCenterPoint) Default values. |
interface |
OrdinateBaselineBuilder
Represents a builder for an ordinate baseline
This is a sub-builder class and cannot be directly instantiated . |
interface |
OrdinateDimensionBuilder
Represents a
OrdinateDimension builder To create a new instance of this class, use DimensionCollection.createOrdinateDimensionBuilder(nxopen.annotations.OrdinateDimension) Created in NX9.0.0 |
interface |
OrdinateMargin
Represents an ordinate margin.
|
interface |
OrdinateStyleBuilder
Represents a
OrdinateStyleBuilder . |
interface |
OriginBuilder
Represents a
OriginBuilder
This is a sub-builder class and cannot be directly instantiated Created in NX6.0.0 |
interface |
PartIdentificationBuilder
Represents a
PartIdentification builder To create a new instance of this class, use PmiAttributeCollection.createPartIdentificationBuilder(nxopen.annotations.PartIdentification) Created in NX6.0.0 |
interface |
PartsListBuilder
Represents a
PartsListBuilder . |
interface |
PartSymbolFolder
Represents a part symbol folder
To create or edit an instance of this class, use PartSymbolFolderBuilder Created in NX7.5.0 |
interface |
PartSymbolFolderBuilder
Represents a
PartSymbolFolderBuilder . |
interface |
PinListBuilder
Builder for Formboard pin list functionality used in formboard.
|
interface |
PlaneBuilder
Represents a
PlaneBuilder object. |
interface |
Pmi
Represents a PMI(Product and Manufacturing Information) object.
|
interface |
PmiAngularDimensionBuilder
Represents a
Annotations.AngularDimension builder This is an abstract class and cannot be instantiated. |
interface |
PmiAttributeBuilder
Represents a
PmiAttribute builder To create a new instance of this class, use PmiAttributeCollection.createPmiAttributeBuilder(nxopen.annotations.PmiAttribute) Created in NX6.0.0 |
interface |
PmiAttributeValue
Represents a PMI Attribute Value
This is an abstract class. |
interface |
PmiAttributeValueInteger
Represents a PMI Attribute Integer Value
To create or edit an instance of this class, use PmiAttributeValueIntegerBuilder Created in NX6.0.0 |
interface |
PmiAttributeValueIntegerBuilder
Represents a
PmiAttributeValueInteger builder To create a new instance of this class, use PmiAttributeCollection.createPmiAttributeValueIntegerBuilder(nxopen.annotations.PmiAttributeValueInteger) Created in NX6.0.0 |
interface |
PmiAttributeValueList
Represents a PMI Attribute List Value
To create or edit an instance of this class, use PmiAttributeValueListBuilder Created in NX6.0.0 |
interface |
PmiAttributeValueListBuilder
Represents a
PmiAttributeValueList builder To create a new instance of this class, use PmiAttributeCollection.createPmiAttributeValueListBuilder(nxopen.annotations.PmiAttributeValueList) Created in NX6.0.0 |
interface |
PmiAttributeValueMultipleString
Represents a PMI Attribute MultipleString Value
To create or edit an instance of this class, use nxopen.annotations.PmiAttributeValueMultipleStringBuilder Created in NX6.0.0 |
interface |
PmiAttributeValueNumber
Represents a PMI Attribute Number Value
To create or edit an instance of this class, use PmiAttributeValueNumberBuilder Created in NX6.0.0 |
interface |
PmiAttributeValueNumberBuilder
Represents a
PmiAttributeValueNumber builder To create a new instance of this class, use PmiAttributeCollection.createPmiAttributeValueNumberBuilder(nxopen.annotations.PmiAttributeValueNumber) Created in NX6.0.0 |
interface |
PmiAttributeValueString
Represents a PMI Attribute String Value
To create or edit an instance of this class, use nxopen.annotations.PmiAttributeValueStringBuilder Created in NX6.0.0 |
interface |
PmiAttributeValueUrl
Represents a PMI Attribute Url Value
To create or edit an instance of this class, use PmiAttributeValueUrlBuilder Created in NX6.0.0 |
interface |
PmiAttributeValueUrlBuilder
Represents a
PmiAttributeValueUrl builder To create a new instance of this class, use PmiAttributeCollection.createPmiAttributeValueUrlBuilder(nxopen.annotations.PmiAttributeValueUrl) Created in NX6.0.0 |
interface |
PmiCenterline3dBuilder
Builder for creating Pmi 3D Centerline.
|
interface |
PmiCenterMarkBuilder
Builder for creating PMI Center Mark.
|
interface |
PmiChamferDimensionBuilder
Represents a
PmiChamferDimension builder To create a new instance of this class, use DimensionCollection.createPmiChamferDimensionBuilder(nxopen.annotations.PmiChamferDimension) Created in NX9.0.0 |
interface |
PmiCurveLengthDimensionBuilder
Represents a
PmiArcLengthDimension builder To create a new instance of this class, use DimensionCollection.createPmiCurveLengthDimensionBuilder(nxopen.annotations.PmiArcLengthDimension) Created in NX9.0.0 |
interface |
PmiCustomSymbolBuilder
Represents builder for PMI Custom Symbol
To create a new instance of this class, use CustomSymbolCollection.createPmiCustomSymbolBuilder(nxopen.annotations.PmiCustomSymbol) Created in NX7.5.0 |
interface |
PmiDatumFeatureSymbolBuilder
datum feature symbol builder
To create a new instance of this class, use GdtDatumCollection.createPmiDatumFeatureSymbolBuilder(nxopen.annotations.Datum) Created in NX6.0.0 |
interface |
PmiDatumTargetBuilder
Represents a
PmiDatumTargetBuilder
To create a new instance of this class, use AnnotationManager.createPmiDatumTargetBuilder(nxopen.annotations.DatumTarget) Default values. |
interface |
PMIExplicitOrderBuilder
This is the
PMIExplicitOrderBuilder for the explicit order To create a new instance of this class, use PmiManager.createExplicitOrderBuilder() Created in NX9.0.0 |
interface |
PmiFeatureControlFrameBuilder
Represents a
PmiFeatureControlFrameBuilder
To create a new instance of this class, use AnnotationManager.createPmiFeatureControlFrameBuilder(nxopen.annotations.Fcf) Created in NX6.0.0 |
interface |
PmiFilter
Represents a base class for a PMI filter.
|
interface |
PmiFilterByPart
Represents a PMI filter defined by a set of parts.
|
interface |
PmiFilterByType
Represents a PMI filter defined by a set of types.
|
interface |
PmiFilterByView
Represents a PMI filter defined by a set of views.
|
interface |
PmiIntegerBuilder
Represents a
PmiInteger builder To create a new instance of this class, use PmiAttributeCollection.createPmiIntegerBuilder(nxopen.annotations.PmiInteger) Default values. |
interface |
PmiLinearDimensionBuilder
Represents a
Annotations.Dimension builder To create a new instance of this class, use DimensionCollection.createPmiLinearDimensionBuilder(nxopen.annotations.Dimension) Created in NX9.0.0 |
interface |
PmiLineWeldBuilder
Represents a
PmiLineWeld builder To create a new instance of this class, use WeldCollection.createPmiLineWeldBuilder(nxopen.annotations.PmiLineWeld) Default values. |
interface |
PmiMajorAngularDimensionBuilder
Represents a
Annotations.AngularDimension builder To create a new instance of this class, use DimensionCollection.createPmiMajorAngularDimensionBuilder(nxopen.annotations.BaseAngularDimension) Created in NX9.0.0 |
interface |
PmiMinorAngularDimensionBuilder
Represents a
Annotations.AngularDimension builder To create a new instance of this class, use DimensionCollection.createPmiMinorAngularDimensionBuilder(nxopen.annotations.BaseAngularDimension) Created in NX9.0.0 |
interface |
PmiNoteBuilder
Represents a
Note builder To create a new instance of this class, use AnnotationManager.createPmiNoteBuilder(nxopen.annotations.SimpleDraftingAid) Created in NX6.0.0 |
interface |
PmiNumberBuilder
Represents a
PmiNumber builder To create a new instance of this class, use PmiAttributeCollection.createPmiNumberBuilder(nxopen.annotations.PmiNumber) Default values. |
interface |
PmiOrdinateDimensionBuilder
Represents a
Annotations.OrdinateDimension builder To create a new instance of this class, use DimensionCollection.createPmiOrdinateDimensionBuilder(nxopen.annotations.OrdinateDimension) Created in NX9.0.0 |
interface |
PmiRadialDimensionBuilder
Represents a
Annotations.Dimension builder To create a new instance of this class, use DimensionCollection.createPmiRadialDimensionBuilder(nxopen.annotations.Dimension) Created in NX9.0.0 |
interface |
PmiRapidDimensionBuilder
Represents a
Annotations.Dimension builder To create a new instance of this class, use DimensionCollection.createPmiRapidDimensionBuilder(nxopen.annotations.Dimension) Created in NX9.0.0 |
interface |
PmiThicknessDimensionBuilder
Represents a
PmiConcentricCircleDimension builder To create a new instance of this class, use DimensionCollection.createPmiThicknessDimensionBuilder(nxopen.annotations.PmiConcentricCircleDimension) Created in NX9.0.0 |
interface |
PmiTrackingPropertiesBuilder
Represents a
Annotations.AngularDimension builder To create a new instance of this class, use AnnotationManager.createPmiTrackingPropertiesBuilder() Created in NX10.0.0 |
interface |
PmiUrlNoteBuilder
Represents a
PmiUrlNote builder To create a new instance of this class, use PmiAttributeCollection.createPmiUrlNoteBuilder(nxopen.annotations.PmiUrlNote) Created in NX6.0.0 |
interface |
PmiUserDefinedBuilder
Represents a
PmiUserDefined builder To create a new instance of this class, use PmiAttributeCollection.createPmiUserDefinedBuilder(nxopen.annotations.PmiUserDefined) Created in NX6.0.0 |
interface |
PmiWaveLinkBuilder
Represents a
Pmi builder To create a new instance of this class, use PmiWaveCollection.createPmiWaveLinkBuilder(Annotation) Created in NX8.0.0 |
interface |
ProcessSpecificationBuilder
Represents a
ProcessSpecification builder To create a new instance of this class, use PmiAttributeCollection.createProcessSpecificationBuilder(nxopen.annotations.ProcessSpecification) Created in NX6.0.0 |
interface |
QueryPmiBuilder
Represents a
QueryPmiBuilder
To create a new instance of this class, use AnnotationManager.createQueryPmiBuilder() Default values. |
interface |
RadialDimensionBuilder
Represents a
Annotations.Dimension builder To create a new instance of this class, use DimensionCollection.createRadialDimensionBuilder(nxopen.annotations.Dimension) Created in NX9.0.0 |
interface |
RadialStyleBuilder
Represents a
RadialStyleBuilder . |
interface |
RapidDimensionBuilder
Represents a
Annotations.Dimension builder To create a new instance of this class, use DimensionCollection.createRapidDimensionBuilder(nxopen.annotations.Dimension) Created in NX9.0.0 |
interface |
RegionBuilder
Represents a
RegionBuilder builder To create a new instance of this class, use PmiRegionCollection.createRegionBuilder(nxopen.annotations.Region) Default values. |
interface |
ReplaceSymbolBuilder
Represents a Builder for Replace Custom Symbol functionality
To create a new instance of this class, use CustomSymbolCollection.createReplaceSymbolBuilder() Default values. |
interface |
RetainedAnnotationsBuilder
|
interface |
RevisionBusinessModifier
Represents business modifier that applies a revision (in the string format such as -A1) to
a PMI.
|
interface |
RevisionBusinessModifierBuilder
Represents a
RevisionBusinessModifier builder To create a new instance of this class, use BusinessModifierCollection.createRevisionBusinessModifierBuilder(nxopen.annotations.RevisionBusinessModifier) Created in NX6.0.0 |
interface |
SafetyClassBusinessModifier
Represents buiness modifier that applies safety classification such as Critical, Major
to a PMI. please see ug_safety_class_busmod.dfa for attribute details.
|
interface |
SafetyClassBusinessModifierBuilder
Represents a
SafetyClassBusinessModifier builder To create a new instance of this class, use BusinessModifierCollection.createSafetyClassBusinessModifierBuilder(nxopen.annotations.SafetyClassBusinessModifier) Created in NX6.0.0 |
interface |
SearchCriteriaCalloutBuilder
Represents SearchCriteriaCalloutBuilder
This is a sub-builder class and cannot be directly instantiated . |
interface |
SearchCriteriaDatumFeatureSymbolBuilder
Represents SearchCriteriaDatumFeatureSymbolBuilder
To create a new instance of this class, use SearchModelViewCollection.createSearchCriteriaDatumFeatureSymbolBuilder(nxopen.NXObject) Created in NX7.5.0 |
interface |
SearchCriteriaDatumTargetBuilder
Represents SearchCriteriaDatumTargetBuilder
To create a new instance of this class, use SearchModelViewCollection.createSearchCriteriaDatumTargetBuilder(nxopen.NXObject) Created in NX7.5.0 |
interface |
SearchCriteriaDimensionBuilder
Represents SearchCriteriaDimensionBuilder
To create a new instance of this class, use SearchModelViewCollection.createSearchCriteriaDimensionBuilder(nxopen.NXObject) Created in NX7.5.0 |
interface |
SearchCriteriaFeatureControlFrameBuilder
Represents SearchCriteriaFeatureControlFrameBuilder
To create a new instance of this class, use SearchModelViewCollection.createSearchCriteriaFeatureControlFrameBuilder(nxopen.NXObject) Created in NX7.5.0 |
interface |
SearchCriteriaPMINotesBuilder
Represents SearchCriteriaPMINotesBuilder
To create a new instance of this class, use SearchModelViewCollection.createSearchCriteriaPminotesBuilder(nxopen.NXObject) Created in NX7.5.0 |
interface |
SearchCriteriaSurfaceFinishBuilder
Represents SearchCriteriaSurfaceFinishBuilder
To create a new instance of this class, use SearchModelViewCollection.createSearchCriteriaSurfaceFinishBuilder(nxopen.NXObject) Created in NX7.5.0 |
interface |
SearchModelView
Represents a search model view
To create or edit an instance of this class, use SearchModelViewBuilder Created in NX7.5.0 |
interface |
SearchModelViewBuilder
Represents a
SearchModelViewBuilder
To create a new instance of this class, use SearchModelViewCollection.createSearchModelViewBuilder(nxopen.ModelingView) Default values. |
interface |
SelectAnnotationList
Represents a list of objects on a selection list.
|
interface |
SelectBaseCustomSymbolList
Represents a list of objects on a selection list.
|
interface |
SelectDimension
Represents a single object selection.
|
interface |
SelectOrdinateDimensionList
Represents a list of objects on a selection list.
|
interface |
SelectTableSectionList
Represents a list of objects on a selection list.
|
interface |
ShipDimensionBuilder
Represents a
Annotations.Dimension builder To create a new instance of this class, use ShipDimensionCollection.createShipDimensionBuilder(nxopen.annotations.Dimension) Created in NX9.0.0 |
interface |
ShipDraftingFramebarGeneralBuilder
Represents a
ShipDraftingFramebarGeneralBuilder
This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0 |
interface |
SingleSidedDisplayBuilder
Represents a
SingleSidedDisplayBuilder . |
interface |
SmashCustomSymbolBuilder
Represents a
SmashCustomSymbolBuilder . |
interface |
SpecificNoteBuilder
Represents a
SpecificNote builder To create a new instance of this class, use PmiAttributeCollection.createSpecificNoteBuilder(nxopen.annotations.SpecificNote) Created in NX6.0.0 |
interface |
StyleBuilder
Represents a
StyleBuilder . |
interface |
SurfaceFinishBuilder
Represents a
SurfaceFinish builder To create a new instance of this class, use PmiAttributeCollection.createSurfaceFinishBuilder(nxopen.annotations.SurfaceFinish) Created in NX6.0.0 |
interface |
SymbolCatalogBuilder
Represents a builder to instantiate a symbol from a parameterized family of standard
symbols defined in catalogs, eg. for standard fasteners.
|
interface |
SymbolCatalogParameterBuilder
This builder allows you to define one parameter for a symbol
To create a new instance of this class, use SymbolCatalogBuilder.newParameter() Created in NX8.0.0 |
interface |
SymbolCatalogParameterBuilderList
Represents a list of objects.
|
interface |
SymbolFile
Represents a symbolFile
To create or edit an instance of this class, use SymbolFileBuilder Created in NX8.0.0 |
interface |
SymbolFileBuilder
Represents builder for drafting Symbol file builder
To create a new instance of this class, use SymbolFileCollection.createSymbolFileBuilder(nxopen.annotations.SymbolFile) Created in NX8.0.0 |
interface |
SymbolStyleBuilder
Represents a
SymbolStyleBuilder . |
interface |
SymbolWorkflowBuilder
|
interface |
SymmetricalCenterlineBuilder
Builder for creating Symmetrical Centerline.
|
interface |
SymmetricalCenterlineSettingsBuilder
Represents a Builder for Symmetrical Centerline Settings .
|
interface |
TableCellStyleBuilder
Represents a
TableCellStyleBuilder . |
interface |
TableEditSettingsBuilder
Represents a
TableEditSettingsBuilder . |
interface |
TableSectionBuilder
Represents a
TableSection builder To create a new instance of this class, use TableSectionCollection.createTableSectionBuilder(nxopen.annotations.TableSection) Default values. |
interface |
TableSectionStyleBuilder
Represents a
TableSectionStyleBuilder . |
interface |
TableStyleBuilder
Represents a
TableStyleBuilder . |
interface |
TabularNoteStyleBuilder
Represents a
TabularNoteStyleBuilder . |
interface |
TargetPointBuilder
Represents a
TargetPoint builder To create a new instance of this class, use TargetPointCollection.createTargetPointBuilder(nxopen.annotations.TargetPoint) Default values. |
interface |
TextWithEditControlsBuilder
Represents a
TextWithEditControlsBuilder which collects
internationalized text strings from the user for processing on an annotation object. |
interface |
TextWithSymbolsBuilder
Represents a
TextWithSymbolsBuilder which collects
internationalized text strings from the user for processing on an annotation object. |
interface |
ThicknessDimensionBuilder
Represents a
ConcentricCircleDimension builder To create a new instance of this class, use DimensionCollection.createThicknessDimensionBuilder(nxopen.annotations.BaseConcentricCircleDimension) Created in NX9.0.0 |
interface |
TitleBlockCellBuilderList
Represents a list of objects.
|
interface |
UnitsStyleBuilder
Represents a
UnitsStyleBuilder . |
interface |
UrlBusinessModifier
Represents business modifier that applies an URL to a PMI.
|
interface |
UrlBusinessModifierBuilder
Represents a
UrlBusinessModifier builder To create a new instance of this class, use BusinessModifierCollection.createUrlBusinessModifierBuilder(nxopen.annotations.UrlBusinessModifier) Created in NX6.0.0 |
interface |
VerticalOrdinateMargin
Represents a vertical ordinate margin .
|
Modifier and Type | Method and Description |
---|---|
TaggedObject |
PmiAttributeCollection.findObject(String journalIdentifier)
Finds the
PmiAttribute with the given identifier as recorded in a journal. |
TaggedObject |
BusinessModifierCollection.findObject(String journalIdentifier)
Finds the
BusinessModifier with the given identifier as recorded in a journal. |
TaggedObject |
PmiWaveLinkBuilder.sourcePart()
Returns the source part for the WAVE link
License requirements: solid_modeling ("SOLIDS MODELING") . |
TaggedObject |
PmiWaveLinkBuilder.targetPart()
Returns the target part for the WAVE link
License requirements: solid_modeling ("SOLIDS MODELING") . |
Modifier and Type | Method and Description |
---|---|
void |
PmiWaveLinkBuilder.setSourcePart(TaggedObject sourcePart)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
PmiWaveLinkBuilder.setTargetPart(TaggedObject targetPart)
License requirements: solid_modeling ("SOLIDS MODELING") . |
Modifier and Type | Interface and Description |
---|---|
interface |
AbsolutePositionBuilder
Represents a builder class that absolutely positions the specified objects.
|
interface |
Arrangement
Manages the suppression of
Component s within a
ComponentAssembly . |
interface |
ArrangementsBuilder
Represents an arrangements builder that selects an arrangement
.
|
interface |
AssembliesGeneralPropertiesBuilder
Represents an
AssembliesGeneralPropertiesBuilder to be used for changing the
general properties of a component. |
interface |
AssembliesParameterPropertiesBuilder
Represents an
AssembliesParameterPropertiesBuilder to be used for changing the
name or modifying the positioning mixture status of a component. |
interface |
Assembly
Assembly class
This is an abstract class, and cannot be instantiated. |
interface |
AttributeSearchTerm
An attribute search term within a
SubsetRecipe . |
interface |
AttributeSearchTermBuilder
An AttributeSearchTermBuilder is used to create or edit an
AttributeSearchTerm . |
interface |
BoxSearchTerm
A volume search term within a
SubsetRecipe . |
interface |
BoxSearchTermBuilder
A BoxSearchTermBuilder is used to create or edit an
BoxSearchTerm . |
interface |
ClearanceAnalysisBuilder
Represents
ClearanceAnalysisBuilder . |
interface |
ClearanceSet
Represents
ClearanceSet . |
interface |
Component
Represents a component in a
ComponentAssembly . |
interface |
ComponentAssembly
Represents the set of
Component s that make up an
assembly. |
interface |
ComponentOrder
Represents an order object that stores the order of child
Component s in context
of parent ComponentAssembly . |
interface |
ComponentPattern
Represents the component pattern class.
|
interface |
ComponentPatternBuilder
Represents a builder class that performs various
ComponentPattern operations. |
interface |
ConstraintDisplayBuilder
The
ConstraintDisplayBuilder can be used to control visibility
of constraints and optionally components. |
interface |
CreateNewComponentBuilder
Represents a
CreateNewComponentBuilder builder class To create a new instance of this class, use AssemblyManager.createNewComponentBuilder() Default values. |
interface |
CreateOverridePartBuilder
Represents a builder class that creates empty override part in the specified design elements.
|
interface |
DeleteOverridePartBuilder
Represents a builder class that deletes override part in the specified design elements.
|
interface |
DesignElementBuilder
Represents a builder class that performs various design element operations.
|
interface |
ExplicitSearchTerm
A
SubsetRecipe search term that refers explicitly to
a design element. |
interface |
ExplodedComponent
Represents a
Component within an explosion. |
interface |
Explosion
Represents an explosion.
|
interface |
FindInCollaborativeDesign
FindInCollaborativeDesign is a searcher for performing simple searches in the context of a subset.
|
interface |
GroupSearchTerm
A group of
SearchTerm s within a SubsetRecipe . |
interface |
HideComponentBuilder
Represents a
HideComponentBuilder To create a new instance of this class, use AssemblyManager.createHideComponentBuilder() Created in NX6.0.0 |
interface |
LoadInterpartDataBuilder
Represents a builder
LoadInterpartDataBuilder To create a new instance of this class, use AssemblyManager.createLoadInterpartDataBuilder() Default values. |
interface |
MakeUniquePartBuilder
Represents a
MakeUniquePartBuilder builder To create a new instance of this class, use AssemblyManager.createMakeUniquePartBuilder() Default values. |
interface |
Order
Represents base class for all Order classes.
|
interface |
Partition
A partition is a Teamcenter object in a Collaborative Design.
|
interface |
PartitionList
Represents a list of objects.
|
interface |
PartitionScheme
A partition scheme is a Teamcenter object in a Collaborative Design.
|
interface |
PartitionSearchTerm
A
Assemblies.SubsetRecipe search term that refers to a partition. |
interface |
PatternInstance
Represents the pattern instance object.
|
interface |
PatternMaster
Represents the pattern master object.
|
interface |
PatternMember
Represents the pattern member object.
|
interface |
PlaneSearchTerm
A plane search term within a
SubsetRecipe . |
interface |
PlaneSearchTermBuilder
A PlaneSearchTermBuilder is used to create or edit an
PlaneSearchTerm . |
interface |
PositioningTask
Represents the class for positioning task.
|
interface |
PositioningTaskBuilder
Represents the class for positioning task builder
To create a new instance of this class, use SubsetCollection.createPositioningTaskBuilder(nxopen.assemblies.PositioningTask) Created in NX10.0.0 |
interface |
ProductOutlineBuilder
Represents a builder
ProductOutlineBuilder . |
interface |
ProximitySearchTerm
A proximity search term within a
SubsetRecipe . |
interface |
ProximitySearchTermBuilder
A ProximitySearchTermBuilder is used to create or edit an
Assemblies.BoxSearchTerm . |
interface |
RelinkerBuilder
Represents a
RelinkerBuilder
To create a new instance of this class, use RelinkerCollection.createBuilder() Created in NX5.0.0 |
interface |
ReplaceComponentBuilder
Represents a
ReplaceComponentBuilder builder To create a new instance of this class, use AssemblyManager.createReplaceComponentBuilder() Default values. |
interface |
SearchResultElement
A search result element can be produced as the result of a search performed in the context of a
SubsetBuilder . |
interface |
SearchTerm
A search term is used to specify a search for the contents of a
Subset . |
interface |
SearchTermBuilder
A SearchTermBuilder is used to create or edit an
SearchTerm . |
interface |
SelectComponent
Represents a single object selection.
|
interface |
SelectComponentList
Represents a list of objects on a selection list.
|
interface |
ShowComponentBuilder
Represents a
ShowComponentBuilder To create a new instance of this class, use AssemblyManager.createShowComponentBuilder() Created in NX6.0.0 |
interface |
Subset
A subset is a set of design elements within a collaborative design.
|
interface |
SubsetBuilder
A SubsetBuilder is used to create or edit an
Subset . |
interface |
SubsetConfigurationBuilder
A SubsetConfigurationBuilder is used to edit the revision rule and effectivity used
to configure the contents of the subset.
|
interface |
UpdateDesignElementPositionBuilder
Represents the builder class that updates positions of the DE's(Shape/Reuse) or Subordinates with override that are out of date.
|
interface |
UpdateStructureBuilder
Represents a builder
UpdateStructureBuilder . |
Modifier and Type | Interface and Description |
---|---|
interface |
InterfaceObject
Represents a Product Interface Object Builder.
|
interface |
ObjectBuilder
Represents a Product Interface Object Builder.
|
interface |
PropertyBuilder
Represents a
PropertyBuilder builder To create a new instance of this class, use Collection.createPropertyBuilder() Created in NX9.0.0 |
Modifier and Type | Interface and Description |
---|---|
interface |
AngularDimension
Represents a Angular Dimension block .
|
interface |
BodyCollector
Represents a Body Collector block .
|
interface |
Button
Represents a button .
|
interface |
ChooseExpression
Represents Choose Expression block .
|
interface |
CompositeBlock
A composite block is a block that contains other blocks .
|
interface |
CurveCollector
Represents a Curve Collector .
|
interface |
DoubleBlock
Represents a Double block .
|
interface |
DrawingArea
Represents a Drawing Area block .
|
interface |
Enumeration
Represents an Enumeration block .
|
interface |
Explorer
Represents an Explorer block.
|
interface |
ExpressionBlock
Represents an Expression block .
|
interface |
FaceCollector
Represents a Face Collector .
|
interface |
FileSelection
Represents File Selection With Browse block .
|
interface |
FolderSelection
Represents Folder Selection With Browse block .
|
interface |
IntegerBlock
Represents a Integer block .
|
interface |
Label
Represents a Label .
|
interface |
LayerBlock
Represents a Layer block .
|
interface |
LinearDimension
Represents a Linear Dimension block .
|
interface |
LineColorFontWidth
Represents a Line Width block .
|
interface |
LineFont
Represents a Line Width block .
|
interface |
LineWidth
Represents a Line Width block .
|
interface |
ListBox
Represents a ListBox block .
|
interface |
Microposition
Represents a Microposition block .
|
interface |
MultilineString
Represents a Multiline String block .
|
interface |
ObjectColorPicker
Represents an Object Color Picker Block .
|
interface |
OnPathDimension
Represents a On Path Dimension block .
|
interface |
OrientXpress
Represents OrientXpress Block .
|
interface |
RadiusDimension
Represents a Radius Dimension block .
|
interface |
RGBColorPicker
Represents a RGB Color Picker block .
|
interface |
ScrolledWindow
Represents a Scrolled Window block .
|
interface |
SectionBuilder
Represents a Section Builder .
|
interface |
SelectElement
Represents a Select Elements block .
|
interface |
SelectPartFromList
Represents a Select Part From List block .
|
interface |
Separator
Represents a Separator block .
|
interface |
SetList
Represents a SetList block .
|
interface |
SpecifyCSYS
Represents a Specify CSYS block .
|
interface |
SpecifyLocation
Represents a Specify Location block .
|
interface |
SpecifyOrientation
Represents Specify Orientation block .
|
interface |
SpecifyPlane
Represents a Specify Plane block .
|
interface |
SpecifyPoint
Represents a Specify Point block .
|
interface |
SpecifyVector
Represents Specify Vector block .
|
interface |
StringBlock
Represents a String block .
|
interface |
SuperPoint
Represents a Super Point block .
|
interface |
SuperSection
Represents a Super Section block .
|
interface |
TabControl
Represents a Tab Control layout .
|
interface |
TextColorFontWidth
Represents a Line Width block .
|
interface |
Toggle
Represents a Toggle block .
|
interface |
Tree
Represents the Tree block in block styler automation.
|
interface |
UIBlock
Represents a UI Block .
|
interface |
Wizard
Represents a Wizard block .
|
Modifier and Type | Method and Description |
---|---|
TaggedObject |
RadiusDimension.expressionObject()
Returns the ExpressionObject
License requirements: None. |
TaggedObject |
OnPathDimension.expressionObject()
Returns the ExpressionObject
License requirements: None. |
TaggedObject |
LinearDimension.expressionObject()
Returns the ExpressionObject
License requirements: None. |
TaggedObject |
ExpressionBlock.expressionObject()
Returns the ExpressionObject
License requirements: None. |
TaggedObject |
AngularDimension.expressionObject()
Returns the ExpressionObject
License requirements: None. |
TaggedObject[] |
SelectObject.getLastDeselectedObjects()
Gets the LastDeselectedObjects
License requirements: None. |
TaggedObject[] |
SelectObject.getLastSelectedObjects()
Gets the LastSelectedObjects
License requirements: None. |
TaggedObject[] |
SuperSection.getSelectedObjects()
Gets the SelectedObjects
License requirements: None. |
TaggedObject[] |
SuperPoint.getSelectedObjects()
Gets the SelectedObjects
License requirements: None. |
TaggedObject[] |
SpecifyVector.getSelectedObjects()
Gets the SelectedObjects
License requirements: None. |
TaggedObject[] |
SpecifyPoint.getSelectedObjects()
Gets the SelectedObjects
License requirements: None. |
TaggedObject[] |
SpecifyPlane.getSelectedObjects()
Gets the SelectedObjects
License requirements: None. |
TaggedObject[] |
SpecifyCSYS.getSelectedObjects()
Gets the SelectedObjects
License requirements: None. |
TaggedObject[] |
SelectPartFromList.getSelectedObjects()
Gets the SelectedObjects
License requirements: None. |
TaggedObject[] |
SelectObject.getSelectedObjects()
Gets the SelectedObjects
License requirements: None. |
TaggedObject[] |
SelectElement.getSelectedObjects()
Gets the SelectedObjects
License requirements: None. |
TaggedObject[] |
SectionBuilder.getSelectedObjects()
Gets the SelectedObjects
License requirements: None. |
TaggedObject[] |
FaceCollector.getSelectedObjects()
Gets the SelectedObjects
License requirements: None. |
TaggedObject[] |
CurveCollector.getSelectedObjects()
Gets the SelectedObjects
License requirements: None. |
TaggedObject[] |
BodyCollector.getSelectedObjects()
Gets the SelectedObjects
License requirements: None. |
TaggedObject |
PropertyList.getTaggedObject(int propertyIndex)
Gets the tagged object for the given index.
|
TaggedObject |
PropertyList.getTaggedObject(String propertyName)
Gets the tagged object for the given property name.
|
TaggedObject[] |
PropertyList.getTaggedObjectVector(int propertyIndex)
Gets the tagged object vector for the given index.
|
TaggedObject[] |
PropertyList.getTaggedObjectVector(String propertyName)
Gets the tagged object vector for the given property name.
|
TaggedObject |
OnPathDimension.path()
Returns the Path
License requirements: None. |
TaggedObject |
OrientXpress.referenceCsys()
Returns the ReferenceCsys
License requirements: None. |
TaggedObject |
ChooseExpression.selectedExpression()
Returns the SelectedExpression
License requirements: None. |
TaggedObject |
RadiusDimension.units()
Returns the Units
License requirements: None. |
TaggedObject |
OnPathDimension.units()
Returns the Units
License requirements: None. |
TaggedObject |
LinearDimension.units()
Returns the Units
License requirements: None. |
TaggedObject |
ExpressionBlock.units()
Returns the Units for the expression
License requirements: None. |
TaggedObject |
AngularDimension.units()
Returns the Units
License requirements: None. |
Modifier and Type | Method and Description |
---|---|
int |
BlockDialog.Filter.filter(UIBlock selectionBlock,
TaggedObject selectedObject)
Filter callback
License requirements: None. |
void |
RadiusDimension.setExpressionObject(TaggedObject expressionObj)
License requirements: None. |
void |
OnPathDimension.setExpressionObject(TaggedObject expressionObj)
License requirements: None. |
void |
LinearDimension.setExpressionObject(TaggedObject expressionObj)
License requirements: None. |
void |
ExpressionBlock.setExpressionObject(TaggedObject expressionObject)
License requirements: None. |
void |
AngularDimension.setExpressionObject(TaggedObject expressionObj)
License requirements: None. |
void |
OnPathDimension.setPath(TaggedObject path)
License requirements: None. |
void |
OrientXpress.setReferenceCsys(TaggedObject referenceCsys)
License requirements: None. |
void |
ChooseExpression.setSelectedExpression(TaggedObject selectedExpression)
License requirements: None. |
void |
SuperSection.setSelectedObjects(TaggedObject[] objectVector)
Sets the SelectedObjects
License requirements: None. |
void |
SuperPoint.setSelectedObjects(TaggedObject[] objectVector)
Sets the SelectedObjects
License requirements: None. |
void |
SpecifyVector.setSelectedObjects(TaggedObject[] objectVector)
Sets the SelectedObjects
License requirements: None. |
void |
SpecifyPoint.setSelectedObjects(TaggedObject[] objectVector)
Sets the SelectedObjects
License requirements: None. |
void |
SpecifyPlane.setSelectedObjects(TaggedObject[] objectVector)
Sets the SelectedObjects
License requirements: None. |
void |
SpecifyCSYS.setSelectedObjects(TaggedObject[] objectVector)
Sets the SelectedObjects
License requirements: None. |
void |
SelectPartFromList.setSelectedObjects(TaggedObject[] objectVector)
Sets the SelectedObjects
License requirements: None. |
void |
SelectObject.setSelectedObjects(TaggedObject[] objectVector)
Sets the SelectedObjects
License requirements: None. |
void |
SelectElement.setSelectedObjects(TaggedObject[] objectVector)
Sets the SelectedObjects
License requirements: None. |
void |
SectionBuilder.setSelectedObjects(TaggedObject[] objectVector)
Sets the SelectedObjects
License requirements: None. |
void |
FaceCollector.setSelectedObjects(TaggedObject[] objectVector)
Sets the SelectedObjects
License requirements: None. |
void |
CurveCollector.setSelectedObjects(TaggedObject[] objectVector)
Sets the SelectedObjects
License requirements: None. |
void |
BodyCollector.setSelectedObjects(TaggedObject[] objectVector)
Sets the SelectedObjects
License requirements: None. |
void |
PropertyList.setTaggedObject(String propertyName,
TaggedObject taggedSc)
Sets the tagged object for the given property name.
|
void |
PropertyList.setTaggedObjectVector(String propertyName,
TaggedObject[] tagVector)
Sets the tagged object vector for the given property name.
|
void |
RadiusDimension.setUnits(TaggedObject units)
License requirements: None. |
void |
OnPathDimension.setUnits(TaggedObject units)
License requirements: None. |
void |
LinearDimension.setUnits(TaggedObject units)
License requirements: None. |
void |
ExpressionBlock.setUnits(TaggedObject units)
License requirements: None. |
void |
AngularDimension.setUnits(TaggedObject units)
License requirements: None. |
Modifier and Type | Method and Description |
---|---|
void |
OnestepUnformBuilder.setAdvancedConstraintInformation(int advancedConstraintPartType,
TaggedObject[] blankHolderWithAddendumBinderRegion,
TaggedObject[] blankHolderWithoutAddendumBoundaryOfPart,
double blankHolderWithAddendumPressure,
double blankHolderWithAddendumForce,
double blankHolderWithoutAddendumTension,
double blankHolderWithoutAddendumForce,
double blankHolderWithoutAddendumForceStrength,
TaggedObject[] drawbeadTag,
double[] drawbeadTtension,
double[] drawbeadNtension,
double[] drawbeadForceStrength)
Set advanced constraint information.
|
void |
OnestepUnformBuilder.setAdvancedConstraintInformation(int advancedConstraintPartType,
TaggedObject[] blankHolderWithAddendumBinderRegion,
TaggedObject[] blankHolderWithoutAddendumBoundaryOfPart,
double blankHolderWithAddendumPressure,
double blankHolderWithAddendumForce,
double blankHolderWithoutAddendumTension,
double blankHolderWithoutAddendumForce,
double blankHolderWithoutAddendumForceStrength,
TaggedObject[] drawbeadTag,
double[] drawbeadTtension,
double[] drawbeadNtension,
double[] drawbeadForceStrength)
Set advanced constraint information.
|
void |
OnestepUnformBuilder.setAdvancedConstraintInformation(int advancedConstraintPartType,
TaggedObject[] blankHolderWithAddendumBinderRegion,
TaggedObject[] blankHolderWithoutAddendumBoundaryOfPart,
double blankHolderWithAddendumPressure,
double blankHolderWithAddendumForce,
double blankHolderWithoutAddendumTension,
double blankHolderWithoutAddendumForce,
double blankHolderWithoutAddendumForceStrength,
TaggedObject[] drawbeadTag,
double[] drawbeadTtension,
double[] drawbeadNtension,
double[] drawbeadForceStrength)
Set advanced constraint information.
|
void |
OnestepUnformBuilder.setBorderInfo(TaggedObject[] edgeTags,
int[] nids,
int[] groupInfo)
Sets the boundary condition information.
|
void |
OnestepUnformBuilder.setConstraintInformation(boolean noCommonEdges,
int[] revisedDirU,
int[] revisedDirT,
int[] index,
int[] constraintType,
int[] cacNumsUnform,
int[] cacNumsTarget,
TaggedObject[] consCurveFromUnform,
TaggedObject[] consCurveFromTarget,
Point[] consPointFromUnform,
Point[] consPointFromTarget,
double[] startPtOfConsCrvsUnform,
double[] startPtOfConsCrvsTarget)
Set constraint information.
|
void |
OnestepUnformBuilder.setConstraintInformation(boolean noCommonEdges,
int[] revisedDirU,
int[] revisedDirT,
int[] index,
int[] constraintType,
int[] cacNumsUnform,
int[] cacNumsTarget,
TaggedObject[] consCurveFromUnform,
TaggedObject[] consCurveFromTarget,
Point[] consPointFromUnform,
Point[] consPointFromTarget,
double[] startPtOfConsCrvsUnform,
double[] startPtOfConsCrvsTarget)
Set constraint information.
|
Modifier and Type | Interface and Description | ||||||
---|---|---|---|---|---|---|---|
interface |
AdaptivityExclusionZone
Represents a
AdaptivityExclusionZone . |
||||||
interface |
AdaptivityExclusionZoneBuilder
Builds a
AdaptivityExclusionZone object which
represets adaptivity meta solution related exclusion zones. |
||||||
interface |
AdaptivityMetaSolution
Represents a
AdaptivityMetaSolution . |
||||||
interface |
AdaptivityMetaSolutionBuilder
Builds a
AdaptivityMetaSolution object which
represets a recipe for generating adaptive remesh. |
||||||
interface |
AssignNodalCSBuilder
Represents a
AssignNodalCSBuilder
To create a new instance of this class, use NodeElementInfoManager.createAssignNodalCsBuilder() Default values. |
||||||
interface |
AssyFEModel
This class represents an Assembly Finite Element Model.
|
||||||
interface |
AssyFemPart
Represents an NX part of type .afm.
|
||||||
interface |
AutoBCBuilder
Builds one or more
SimSimulationObject object(s). |
||||||
interface |
AutoMacViewerBuilder
Represents the correlation pairing viewer builder
To create a new instance of this class, use PreTestSolutionCollection.createAutoMacViewerBuilder(nxopen.TaggedObject) Created in NX6.0.0 |
||||||
interface |
AutomaticMorphBuilder
Represents a
AutomaticMorphBuilder To create a new instance of this class, use NodeElementManager.createAutomaticMorphBuilder() Created in NX9.0.0 |
||||||
interface |
AutomaticSweepBetweenSelection
Deprecated.
Deprecated in NX10.0.0. Use
Mesh3dHexBuilder .
|
||||||
interface |
AutoPairs
Represents an autopairs obj
This is a sub object . |
||||||
interface |
AutoPairsBuilder
Builds a
AutoPairs object which
represets a recipe for generating face pairs from a selected set of faces
or solids in the model whose distance is less than a specified tolerance. |
||||||
interface |
BaseFEModel
This class represents an Assembly Finite Element Model.
|
||||||
interface |
BaseFemPart
Represents an NX part of type .afm.
|
||||||
interface |
BaseIteration
This class provides interfaces to query iteration attributes
An instance of this class can not be obtained . |
||||||
interface |
BaseLoadcase
This class provides interfaces to query loadcase attributes
An instance of this class can not be obtained . |
||||||
interface |
BaseResultType
This class provides interfaces to query result type attributes
An instance of this class can not be obtained . |
||||||
interface |
BCSelectionDisplayBuilder
This class provides BC Selection Visual Display support, use this class to get the
BC types in currrent solution, adds special BCs to list, and display the BC's selection
geometry with the BC's color to do visually check
To create a new instance of this class, use SimSimulation.createBcSelectionDisplayBuilder() Default values. |
||||||
interface |
BeamEADBuilder
This class provides Beam/Bar Associated Data Support
To create a new instance of this class, use NodeElementManager.createBeamEadBuilder() Default values. |
||||||
interface |
BeamSection
Represents a Beam Cross Section
This is an abstract class. |
||||||
interface |
Bolt
|
||||||
interface |
BoltBuilder
Represents a
BoltBuilder
To create a new instance of this class, use BoltCollection.createBoltBuilder(nxopen.cae.Bolt) Created in NX7.5.0 |
||||||
interface |
BushingEADBuilder
This class provides Bushing Associated Data Support
To create a new instance of this class, use NodeElementManager.createBushingEadBuilder() Created in NX7.5.0 |
||||||
interface |
CAEBody
Represents a CAE body geometry
.
|
||||||
interface |
CaeDOFSet
Represents a dofset class
CaeDOFSet . |
||||||
interface |
CaeDOFSetDisplay
Represents a DOF Set display attributes
.
|
||||||
interface |
CAEEdge
Represents a CAE edge geometry
.
|
||||||
interface |
CAEFace
Represents a CAE face geometry
.
|
||||||
interface |
CaePart
This is an abstract class for NX parts of type .fem and .sim
This is an abstract class Created in NX5.0.0 |
||||||
interface |
CaeRegionBuilder
Represents a
CaeRegionBuilder builder To create a new instance of this class, use SimSimulation.createCaeRegionBuilder(java.lang.String, nxopen.cae.CaeRegion) Created in NX7.0.0 |
||||||
interface |
CAEVertex
Represents a CAE vertex geometry
.
|
||||||
interface |
CfdContactPreventionConstraint
The contact prevention constraint is a type of constraint which is used by the
Fluid Domain Recipe to generate a fluid domain.
|
||||||
interface |
CfdContactPreventionConstraintBuilder
Represents a
CfdContactPreventionConstraint builder To create a new instance of this class, use CfdContactPreventionConstraintCollection.createBuilder(nxopen.TaggedObject) Created in NX9.0.0 |
||||||
interface |
CfdLocalResolutionConstraint
The local resolution constraint is a type of constraint which is used by the
Fluid Domain Recipe to generate a fluid domain.
|
||||||
interface |
CfdLocalResolutionConstraintBuilder
Represents a
CfdLocalResolutionConstraint builder To create a new instance of this class, use CfdLocalResolutionConstraintCollection.createBuilder(nxopen.TaggedObject) Created in NX9.0.0 |
||||||
interface |
CircularImprintBuilder
Builder for creating Circular Imprint
To create a new instance of this class, use AbstractionManager.createCircularImprintBuilder() Created in NX7.5.0 |
||||||
interface |
ClippingParameters
This class is worked as a packet of information that can be used to set the clipping parameters of a
Post object. |
||||||
interface |
ComacViewerBuilder
Represents the correlation MAC matrix viewer builder
To create a new instance of this class, use CorrelSolutionCollection.createComacViewerBuilder() Created in NX6.0.0 |
||||||
interface |
CombineTrisBuilder
Builder for creating Combine Tris
To create a new instance of this class, use NodeElementManager.createCombineTrisBuilder() Created in NX7.0.0 |
||||||
interface |
CompanionResult
Represents additional results data that will augment a primary set of Analysis results associated to a
SimSolution . |
||||||
interface |
CompanionResultBuilder
Represents a
CompanionResult builder and can
be used to create or edit an CompanionResult To create a new instance of this class, use CompanionResultCollection.createCompanionResultBuilder(nxopen.cae.CompanionResult) Default values. |
||||||
interface |
ConflictResolutionBuilder
Represents a
ConflictResolutionBuilder builder which can resolve conflicts between the two input BCs by a specified rule To create a new instance of this class, use SimSolution.createConflictResolutionBuilder(nxopen.cae.SimGroupContainer, nxopen.cae.SimBC, nxopen.cae.SimBC) Created in NX10.0.0 |
||||||
interface |
ConstraintResolutionBuilder
Deprecated.
Deprecated in NX10.0.0. Use
ConflictResolutionBuilder instead.
|
||||||
interface |
ContactMeshBuilder
Represents a
ContactMeshBuilder
To create a new instance of this class, use MeshManager.createContactMeshBuilder(nxopen.cae.Mesh1d) Created in NX10.0.0 |
||||||
interface |
CorrelAlignmentBuilder
This builder is used to control the alignment parameters of a
CorrelSolution To create a new instance of this class, use SimSolution.createAlignmentBuilder() Created in NX6.0.1 |
||||||
interface |
CorrelApplyAlignmentFromBuilder
This builder is used to apply the alignment matrix read from selected xml file to the test model
To create a new instance of this class, use CorrelManager.createCorrelApplyAlignmentFromBuilder(nxopen.cae.SimSolution) Created in NX9.0.0 |
||||||
interface |
CorrelBaseBuilder
Represents the abstract builder class for all objects defined in correl meta solution
This is an abstract class, and cannot be created. |
||||||
interface |
CorrelFineTuneAlignmentBuilder
This builder is used to nudge the alignment by a fine adjustment
To create a new instance of this class, use CorrelManager.createCorrelFineTuneAlignmentBuilder(nxopen.cae.SimSolution) Created in NX9.0.0 |
||||||
interface |
CorrelModePairingBuilder
This builder is used to control the mode pairing behavior of a
CorrelSolution To create a new instance of this class, use CorrelSolution.createModePairingBuilder() Created in NX6.0.1 |
||||||
interface |
CorrelSolution
Represents a
CorrelSolution , which is a meta-solution used to compare results from two structural dynamics solutions To create or edit an instance of this class, use CorrelSolutionBuilder Created in NX6.0.0 |
||||||
interface |
CorrelSolutionBuilder
This is a manager to the
CAE.CorrelSolution class. |
||||||
interface |
CreateJtBuilder
|
||||||
interface |
CrossSectionParameters
This class is worked as a packet of information that can be used to change cross-section state.
|
||||||
interface |
DeformationParameters
This class is worked as a packet of information that can be be used to deform
Post objects. |
||||||
interface |
DeletePolygonFaceBuilder
Builder for Delete Polygon Face
To create a new instance of this class, use AbstractionManager.createDeletePolygonFaceBuilder() Created in NX8.5.0 |
||||||
interface |
DependentMesh
Represents Mesh Recipe
To create or edit an instance of this class, use DependentMeshBuilder Created in NX5.0.0 |
||||||
interface |
DependentMeshBuilder
Represents a
Mesh2d
To create a new instance of this class, use MeshManager.createDependentMeshBuilder(nxopen.cae.DependentMesh) Created in NX5.0.0 |
||||||
interface |
DependentMeshListItemBuilder
Represents a
DependentMeshListItemBuilder
To create a new instance of this class, use DependentMeshBuilder.createNewListItem(nxopen.cae.CAEEdge, nxopen.cae.CAEEdge, boolean) Created in NX5.0.0 |
||||||
interface |
DependentMeshListItemBuilderList
Represents a list of objects.
|
||||||
interface |
DestinationCollectorBuilder
Represents a Element Collector Container (Ecc) selection
.
|
||||||
interface |
DurabilityAxisSearch
Represents a
DurabilityAxisSearch . |
||||||
interface |
DurabilityDamageEvaluationBuilder
Represents the builder for evaluating durability damage.
|
||||||
interface |
DurabilityDataControlBuilder
Represents a builder class for the transient event data control.
|
||||||
interface |
DurabilityEvaluateFatigueHistoryBuilder
Represents the builder for evaluating fatigue histories.
|
||||||
interface |
DurabilityEvent
Represents a
DurabilityEvent , which is an event of a durability
solution process. |
||||||
interface |
DurabilityEventBuilder
Represents the abstract builder class for all durability events.
|
||||||
interface |
DurabilityEventFatigueSettingsBuilder
Represents a builder class for the event fatigue settings.
|
||||||
interface |
DurabilityEventOverridesBuilder
Represents a builder class for Event Overrides.
|
||||||
interface |
DurabilityEventSolverBuilder
Represents the builder for solving the durability event.
|
||||||
interface |
DurabilityEventStrengthSettingsBuilder
Represents a builder class for the event strength settings.
|
||||||
interface |
DurabilityExcitation
Represents a
DurabilityExcitation . |
||||||
interface |
DurabilityExcitationBuilder
Represents the abstract builder class for all durability excitations.
|
||||||
interface |
DurabilityFatigue
Represents a
DurabilityFatigue . |
||||||
interface |
DurabilityFunctionExcitation
Represents a
DurabilityFunctionExcitation . |
||||||
interface |
DurabilityFunctionExcitationBuilder
Represents a
DurabilityFunctionExcitation builder. |
||||||
interface |
DurabilityLoadPattern
Represents a
DurabilityLoadPattern . |
||||||
interface |
DurabilityLoadPatternBuilder
Represents a
CAE.DurabilityLoadPattern builder. |
||||||
interface |
DurabilityMetaSolution
Represents a
DurabilityMetaSolution . |
||||||
interface |
DurabilityMetaSolutionBuilder
Represents a
DurabilityMetaSolution builder. |
||||||
interface |
DurabilityRandomEvent
Represents a
DurabilityRandomEvent . |
||||||
interface |
DurabilityRandomEventBuilder
Represents the builder for the random durability event.
|
||||||
interface |
DurabilityRandomFatigue
Represents a
DurabilityRandomFatigue . |
||||||
interface |
DurabilityRandomFatigueBuilder
Represents a builder class for the event fatigue settings.
|
||||||
interface |
DurabilityResultPath
Represents a
DurabilityResultPath . |
||||||
interface |
DurabilityResultPathBuilder
Represents a
DurabilityResultPath builder. |
||||||
interface |
DurabilitySolveOptions
Represents a
DurabilitySolveOptions . |
||||||
interface |
DurabilitySolverBuilder
Represents the builder for solving the durability solution process.
|
||||||
interface |
DurabilityStaticEvent
Represents a
DurabilityStaticEvent . |
||||||
interface |
DurabilityStaticEventBuilder
Represents the builder for the static durability event.
|
||||||
interface |
DurabilityStrainGageAnalyzerBuilder
Represents the builder for analyzing strain gage data.
|
||||||
interface |
DurabilityStrength
Represents a
DurabilityStrength . |
||||||
interface |
DurabilityStressAxesBuilder
Represents a builder class for the event fatigue settings.
|
||||||
interface |
DurabilityTransientEvent
Represents a
DurabilityTransientEvent . |
||||||
interface |
DurabilityTransientEventBuilder
Represents the builder for the transient durability event.
|
||||||
interface |
EdgeDensity
Represents a CAE edge density
.
|
||||||
interface |
EdgeSticherBuilder
Represents a
EdgeSticherBuilder To create a new instance of this class, use FemPart.createEdgeSticherBuilder() Default values. |
||||||
interface |
ElementConnectivityBuilder
Represents a
ElementConnectivityBuilder
To create a new instance of this class, use NodeElementManager.createElementConnectivityBuilder() Created in NX5.0.0 |
||||||
interface |
ElementCreateBuilder
Represents a
ElementCreateBuilder which allows you to manually create elements from existing nodes. |
||||||
interface |
ElementDeleteBuilder
Represents a
ElementDeleteBuilder
To create a new instance of this class, use NodeElementManager.createDeleteElementBuilder() Created in NX5.0.0 |
||||||
interface |
ElementExtractBuilder
Builder for creating Element Extract
To create a new instance of this class, use NodeElementManager.createElementExtractBuilder() Created in NX7.5.0 |
||||||
interface |
ElementExtrudeBuilder
Represents a
ElementExtrudeBuilder
To create a new instance of this class, use NodeElementManager.createElementExtrudeBuilder() Created in NX5.0.0 |
||||||
interface |
ElementModifyLabelBuilder
Represents a
ElementModifyLabelBuilder
To create a new instance of this class, use NodeElementManager.createElementModifyLabelBuilder() Created in NX5.0.0 |
||||||
interface |
ElementModifyOrderBuilder
Represents a
ElementModifyOrderBuilder
To create a new instance of this class, use NodeElementManager.createElementModifyOrderBuilder() Created in NX6.0.1 |
||||||
interface |
ElementModifyTypeBuilder
Represents a
ElementModifyTypeBuilder
To create a new instance of this class, use NodeElementManager.createElementModifyTypeBuilder() Created in NX8.5.0 |
||||||
interface |
ElementProjectBuilder
Represents a
ElementProjectBuilder
To create a new instance of this class, use NodeElementManager.createElementProjectBuilder() Created in NX5.0.0 |
||||||
interface |
ElementReflectBuilder
Represents a
ElementReflectBuilder
To create a new instance of this class, use NodeElementManager.createElementReflectBuilder() Created in NX5.0.0 |
||||||
interface |
ElementRevolveBuilder
Represents a
ElementRevolveBuilder
To create a new instance of this class, use NodeElementManager.createElementRevolveBuilder() Created in NX5.0.0 |
||||||
interface |
ElementSplitBuilder
Represents a
ElementSplitBuilder
To create a new instance of this class, use NodeElementManager.createElementSplitBuilder() Created in NX5.0.0 |
||||||
interface |
ElementTranslateBuilder
Represents a
ElementTranslateBuilder
To create a new instance of this class, use NodeElementManager.createElementTranslateBuilder() Created in NX5.0.0 |
||||||
interface |
ElementTypeBuilder
Represents the specification of the FEA Element Type for a meshing dialog.
|
||||||
interface |
FaceDensity
Represents a CAE face density
.
|
||||||
interface |
FaceFromBoundaryBuilder
Builder for creating Polygon Face by boundary
To create a new instance of this class, use AbstractionManager.createFaceFromBoundaryBuilder() Created in NX8.5.0 |
||||||
interface |
FEElemEdge
Represents a Finite Element Edge.
|
||||||
interface |
FEElement
Represents a Finite Element.
|
||||||
interface |
FEElemFace
Represents a Finite Element Face.
|
||||||
interface |
FEModel
This class represents a Finite Element Model.
|
||||||
interface |
FEModelOccAttribute
This class represents an Interface to the Finite Element Model Attributes.
|
||||||
interface |
FEModelOccurrence
This class represents a Finite Element Model Occurrence.
|
||||||
interface |
FemPart
Represents an NX part of type .fem.
|
||||||
interface |
FlatPatternsBuilder
Represents a Flat Patterns Builder.
|
||||||
interface |
FluidDomainBuilder
Represents a
FluidDomainRecipe
To create a new instance of this class, use FluidDomainCollection.createBuilder(nxopen.cae.FluidDomainRecipe) Default values. |
||||||
interface |
FluidDomainRecipe
Represents a FluidDomainRecipe
To create or edit an instance of this class, use FluidDomainBuilder Created in NX8.0.0 |
||||||
interface |
FreeBodyResultsBuilder
Represents a
FreeBodyResultsBuilder To obtain an instance of this class use Session.resultManager() . |
||||||
interface |
FreezeGeometryBuilder
Builder for creating Freeze Geometry
To create a new instance of this class, use GeometryRecipeCollection.createFreezeGeometryBuilder(nxopen.cae.FreezeGeometryRecipe) Created in NX10.0.0 |
||||||
interface |
FreezeGeometryRecipe
Represents FreezeGeometryRecipe
To create or edit an instance of this class, use FreezeGeometryBuilder Created in NX10.0.0 |
||||||
interface |
Function
Represents a function object
To create or edit an instance of this class, use FunctionBuilder Created in NX5.0.0 |
||||||
interface |
FunctionBuilder
This builder class is used to create or edit
Function objects. |
||||||
interface |
GapEADBuilder
This class provides Gap Associated Data Support
To create a new instance of this class, use NodeElementManager.createGapEadBuilder() Created in NX7.5.0 |
||||||
interface |
GeneralGeometryBeamSection
Represents a General Geometry Beam Cross Section
To create or edit an instance of this class, use GeneralGeometryBeamSectionBuilder Created in NX7.5.0 |
||||||
interface |
GeneralGeometryBeamSectionBuilder
Represents a
GeneralGeometryBeamSectionBuilder
To create a new instance of this class, use BeamSectionCollection.createGeneralGeometryBeamSectionBuilder(nxopen.cae.GeneralGeometryBeamSection) Created in NX7.5.0 |
||||||
interface |
GeometryRecipe
Represents a Geometry Recipe
To obtain an instance of this object use one of the creator in GeometryRecipeCollection . |
||||||
interface |
GlobalLayupImportFromPptBuilder
Represents a Global Layup IMport From Ppt Builder.
|
||||||
interface |
IBeamSectionBuilder
|
||||||
interface |
IFEModel
This class represents an Interface to the Finite Element Model.
|
||||||
interface |
IMeshCollector
Represents the base IMeshCollector class for MeshCollector and
MeshCollectorOccurrence classes
Base Class for MeshCollector and MeshCollectorOccurrence classes . |
||||||
interface |
IMeshManager
Manages meshes
IMeshManager in cae parts
This is an abstract class, and cannot be created. |
||||||
interface |
ImportedResult
Represents analysis results for a imported solver results file.
|
||||||
interface |
Iteration
Represents iteration present in a
Loadcase . |
||||||
interface |
LaminateDampingFactorBuilder
The builder for the damping factor.
|
||||||
interface |
LaminateDrapingData
Encapsulate the ply information related to the draping algorithm
To create or edit an instance of this class, use LaminateDrapingDataBuilder Created in NX6.0.0 |
||||||
interface |
LaminateDrapingDataBuilder
Represents a
LaminateDrapingData builder To create a new instance of this class, use LaminatePly.createDrapingDataBuilder() Created in NX6.0.0 |
||||||
interface |
LaminateDrapingExtension
Encapsulate the ply information related to a ply draping extension
To create or edit an instance of this class, use LaminateDrapingExtensionBuilder Created in NX8.5.0 |
||||||
interface |
LaminateDrapingExtensionBuilder
Builder class for
LaminateDrapingExtension To create a new instance of this class, use LaminatePly.createDrapingExtensionBuilder() Created in NX8.5.0 |
||||||
interface |
LaminateDrapingOrientation
Encapsulates the ply draping results
Don't support KF. |
||||||
interface |
LaminateDynamicEvent
The Laminate Dynamic Event.
|
||||||
interface |
LaminateDynamicEventBuilder
Represents a
LaminateDynamicEvent builder This is an abstract class. |
||||||
interface |
LaminateDynamicSim
The Laminate Dynamic Simulation builder is the journalling
interface to build the LaminateDyanmicSim object.
|
||||||
interface |
LaminateDynamicSimBuilder
Represents a
LaminateDynamicSim builder To create a new instance of this class, use LaminateDynamicSimCollection.createDynamicSimBuilder(nxopen.cae.LaminateDynamicSim) Created in NX9.0.0 |
||||||
interface |
LaminateElementFilterBuilder
Represents a
nxopen.cae.LaminateGraphicalReport builder There is no kf creator. |
||||||
interface |
LaminateExtrudeSetup
Extrude Setup
To create or edit an instance of this class, use LaminateExtrudeSetupBuilder Created in NX6.0.4 |
||||||
interface |
LaminateExtrudeSetupBuilder
Represents a
LaminateExtrudeSetup builder To create a new instance of this class, use LaminateGlobalLayupMgr.createLaminateExtrudeSetupBuilder(nxopen.cae.LaminateExtrudeSetup) Default values. |
||||||
interface |
LaminateFiberOrientationOptions
Laminate Fiber Orientation Options
To create or edit an instance of this class, use LaminateFiberOrientationOptionsBuilder Created in NX7.5.0 |
||||||
interface |
LaminateFiberOrientationOptionsBuilder
Represents a
LaminateFiberOrientationOptions builder To create a new instance of this class, use LaminateGlobalLayup.createFiberOrientationOptionsBuilder() Created in NX7.5.0 |
||||||
interface |
LaminateFillSetupBuilder
Represents a
LaminateFillSetupBuilder builder To create a new instance of this class, use LaminateGlobalLayupMgr.createLaminateFillSetupBuilder(nxopen.cae.LaminateExtrudeSetup) Created in NX7.5.2 |
||||||
interface |
LaminateGlobalLayup
Represent a global layup in the ply based modeling.
|
||||||
interface |
LaminateImportedLayupBuilder
Represents a
LaminateImportedLayupBuilder builder To create a new instance of this class, use LaminateGlobalLayupMgr.createLaminateImportedLayupBuilder(nxopen.cae.LaminateGlobalLayup) Default values. |
||||||
interface |
LaminateImportZonesBuilder
Represents a
LaminateImportZonesBuilder builder To create a new instance of this class, use LaminateGlobalLayupMgr.createLaminateImportZonesBuilder() Created in NX10.0.0 |
||||||
interface |
LaminateLayupOffset
laminate layup offset
To create or edit an instance of this class, use LaminateLayupOffsetBuilder Created in NX7.5.0 |
||||||
interface |
LaminateLayupOffsetBuilder
Represents a
LaminateLayupOffset builder To create a new instance of this class, use LaminateGlobalLayupMgr.createLayupOffsetBuilder(nxopen.cae.LaminateLayupOffset) Created in NX7.5.0 |
||||||
interface |
LaminateLockAngleBuilder
Represents a builder
To create a new instance of this class, use LaminateGlobalLayup.createLockAngleBuilder() Created in NX7.5.0 |
||||||
interface |
LaminateMatOrientation
Laminate Material Orientation
To create or edit an instance of this class, use LaminateMatOrientationBuilder Created in NX7.5.0 |
||||||
interface |
LaminateMatOrientationBuilder
Represents a
LaminateMatOrientation builder To create a new instance of this class, use LaminateGlobalLayupMgr.createLaminateMatOrientationBuilder(nxopen.cae.LaminateMatOrientation) Created in NX7.5.0 |
||||||
interface |
LaminateModeProperty
Represents the properties of one normal mode .
|
||||||
interface |
LaminatePly
Represents one ply in a laminate layup
.
|
||||||
interface |
LaminatePlyFilterBuilder
Represents a
LaminatePlyFilterBuilder There is no kf creator. |
||||||
interface |
LaminatePlyMaxThicknessVarBuilder
Builder used to modify the ply maximum accepted thickness variation for laminate fill
To create a new instance of this class, use LaminatePly.createLaminatePlyMaxThicknessVarBuilder() Created in NX8.5.0 |
||||||
interface |
LaminateRandomEvent
The Laminate Dynamic Event.
|
||||||
interface |
LaminateRandomEventBuilder
Represents a
LaminateRandomEvent builder To create a new instance of this class, use LaminateDynamicEventCollection.createRandomEventBuilder(nxopen.cae.LaminateRandomEvent) Created in NX9.0.0 |
||||||
interface |
LaminateRelabelPliesBuilder
Represents a
CAE.LaminateDynamicEvent builder To create a new instance of this class, use LaminateGlobalLayupMgr.createRelabelPliesBuilder() Created in NX10.0.0 |
||||||
interface |
LaminateSelectEntitiesBuilder
Represents a
LaminateSelectEntitiesBuilder To create a new instance of this class, use LaminateGlobalLayupMgr.createLaminateSelectEntitiesBuilder() Created in NX7.5.2 |
||||||
interface |
LaminateSineEvent
The Laminate Sine Event.
|
||||||
interface |
LaminateSineEventBuilder
Represents a
LaminateSineEvent builder To create a new instance of this class, use LaminateDynamicEventCollection.createSineEventBuilder(nxopen.cae.LaminateSineEvent) Created in NX10.0.0 |
||||||
interface |
LaminateViewDrapingResultsBuilder
Represents the builder for the draping results viewer
To create a new instance of this class, use LaminateGlobalLayupMgr.createViewDrapingResultsBuilder(nxopen.cae.LaminateGlobalLayup, nxopen.cae.LaminatePly) Created in NX6.0.0 |
||||||
interface |
LbcAssociationMgr
|
||||||
interface |
Loadcase
Represents loadcases present in a
Result . |
||||||
interface |
LocalRemeshBuilder
Represents a
LocalRemeshBuilder
To create a new instance of this class, use MeshManager.createLocalRemeshBuilder() Default values. |
||||||
interface |
LumpedMassEADBuilder
This class provides LumpedMass Associated Data Support
To create a new instance of this class, use NodeElementManager.createLumpedMassEadBuilder() Default values. |
||||||
interface |
ManualMorphBuilder
Represents a
ManualMorphBuilder To create a new instance of this class, use NodeElementManager.createManualMorphBuilder() Created in NX9.0.0 |
||||||
interface |
ManualNodeAssociationBuilder
Represents a
ManualNodeAssociationBuilder
To create a new instance of this class, use NodeElementManager.createManualNodeAssociationBuilder() Created in NX10.0.0 |
||||||
interface |
ManualSweepBetweenListItemSelection
Represents a
ManualSweepBetweenListItemSelection
To create a new instance of this class, use ManualSweepBetweenSelection.createNewListItem(nxopen.cae.CAEEdge, nxopen.cae.CAEEdge, boolean) Created in NX7.5.2 |
||||||
interface |
ManualSweepBetweenListItemSelectionList
Represents a list of objects.
|
||||||
interface |
ManualSweepBetweenSelection
Deprecated.
Deprecated in NX10.0.0. Use
CAE.Mesh3dHexBuilder .
|
||||||
interface |
MappedHole
Represents a CAE mapped hole
.
|
||||||
interface |
MappedMesh
Represents Mesh Recipe
To create or edit an instance of this class, use MappedMeshBuilder Created in NX5.0.0 |
||||||
interface |
MappedMeshBuilder
Represents a Mapped Mesh Builder.
|
||||||
interface |
MappedResult
Represents analysis results for a imported solver results file.
|
||||||
interface |
MechanicalLoadSumBuilder
Represents a
MechanicalLoadSumBuilder
To create a new instance of this class, use nxopen.cae.modelcheckManager#createMechanicalLoadSumBuilder Created in NX5.0.1 |
||||||
interface |
Mesh
Represents a Mesh
For more information, refer to the Solver language documentation
in the
interface Mesh0d
Represents 0d Mesh
To create or edit an instance of this class, use Mesh0dBuilder Created in NX6.0.0 | ||||||
interface |
Mesh0dBuilder
Represents 0D Mesh
Used to create a
Mesh0d
To create a new instance of this class, use MeshManager.createMesh0dBuilder(nxopen.cae.Mesh0d) Created in NX6.0.0 |
||||||
interface |
Mesh1d
Represents 1d Mesh
To create or edit an instance of this class, use Mesh1dBuilder Created in NX6.0.0 |
||||||
interface |
Mesh1dBuilder
Represents 1d Mesh
Used to create a
Mesh1d
To create a new instance of this class, use MeshManager.createMesh1dBuilder(nxopen.cae.Mesh1d) Created in NX6.0.0 |
||||||
interface |
Mesh2d
Represents 2d Mesh
This is an abstract class . |
||||||
interface |
Mesh2dBuilder
Represents 2D Mesh
Used to create a
Mesh2d
To create a new instance of this class, use MeshManager.createMesh2dBuilder(nxopen.cae.Mesh2d) Created in NX6.0.0 |
||||||
interface |
Mesh2dFree
Represents 2d Mesh
To create or edit an instance of this class, use Mesh2dBuilder Created in NX6.0.0 |
||||||
interface |
Mesh3d
Represents 3d Mesh
To create or edit an instance of this class, use Mesh3dTetBuilder Created in NX6.0.0 |
||||||
interface |
Mesh3dHexBuilder
Represents 3D Hex Mesh
Used to create a
SweptMesh
To create a new instance of this class, use MeshManager.createMesh3dHexBuilder(nxopen.cae.SweptMesh) Created in NX6.0.0 |
||||||
interface |
Mesh3dTetBuilder
Represents 3D Mesh
Used to create a
CAE.Mesh3d
To create a new instance of this class, use MeshManager.createMesh3dTetBuilder(nxopen.cae.Mesh3d) Created in NX6.0.0 |
||||||
interface |
MeshCollector
Represents a MeshCollector
For more information, refer to the Solver language documentation
in the
interface MeshCollectorBuilder
Represents a
MeshCollectorBuilder
To create a new instance of this class, use MeshManager.createCollectorBuilder(nxopen.cae.MeshCollector, java.lang.String) Created in NX5.0.0 | ||||||
interface |
MeshCollectorOccurrence
Represents a MeshCollector Occurrence
To edit an instance of this object use MeshCollectorOccurrenceBuilder . |
||||||
interface |
MeshCollectorOccurrenceBuilder
Represents a
MeshCollectorOccurrenceBuilder
To create a new instance of this class, use MeshManagerOccurrence.createOccurrenceBuilder(nxopen.cae.MeshCollectorOccurrence) Created in NX5.0.0 |
||||||
interface |
MeshControl
Represents a MeshControl
To create or edit an instance of this class, use MeshControlBuilder Created in NX5.0.0 |
||||||
interface |
MeshControlBuilder
Represents a
MeshControl
To create a new instance of this class, use MeshControlCollection.createBuilder(nxopen.cae.MeshControl) Default values. |
||||||
interface |
MeshControlDisplayOptionsBuilder
Represents a
MeshControlDisplayOptionsBuilder
To create a new instance of this class, use MeshControlDisplayManager.createBuilder() Created in NX5.0.0 |
||||||
interface |
MeshFollower
Represents Mesh Recipe
This is an abstract class . |
||||||
interface |
MeshFromBoundaryBuilder
Represents a
MeshFromBoundaryBuilder
To create a new instance of this class, use NodeElementManager.createMeshFromBoundaryBuilder() Created in NX9.0.0 |
||||||
interface |
MeshManager
|
||||||
interface |
MeshManagerOccurrence
Manages MeshOccurrencs and MeshCollectorOccurrences in a fem part
.
|
||||||
interface |
MeshManualSweepBetweenListItemSelection
Represents a
MeshManualSweepBetweenListItemSelection
To create a new instance of this class, use Mesh3dHexBuilder.createNewListItem(nxopen.cae.CAEEdge, nxopen.cae.CAEEdge, boolean) Created in NX10.0.0 |
||||||
interface |
MeshManualSweepBetweenListItemSelectionList
Represents a list of objects.
|
||||||
interface |
MeshMate
Represents a Mesh Mate
.
|
||||||
interface |
MeshPoint
Represents a smart
MeshPoint . |
||||||
interface |
MeshPointConicCenterBuilder
Represents a
MeshPointConicCenterBuilder
To create a new instance of this class, use MeshPointCollection.createMeshpointConicCenterBuilder() Created in NX5.0.2 |
||||||
interface |
MeshPointExistingPointBuilder
Represents a
MeshPointExistingPointBuilder
To create a new instance of this class, use MeshPointCollection.createMeshpointExistingPointBuilder() Created in NX5.0.2 |
||||||
interface |
MeshPointMultipleOnCurveBuilder
Represents a
MeshPointMultipleOnCurveBuilder
To create a new instance of this class, use MeshPointCollection.createMeshpointMultipleOnCurveBuilder() Created in NX5.0.2 |
||||||
interface |
MeshPointOnCurveBuilder
Represents a
MeshPointOnCurveBuilder
To create a new instance of this class, use MeshPointCollection.createMeshpointOnCurveBuilder() Created in NX5.0.2 |
||||||
interface |
MeshPointOnFaceBuilder
Represents a
MeshPointOnFaceBuilder
To create a new instance of this class, use MeshPointCollection.createMeshpointOnFaceBuilder() Created in NX5.0.2 |
||||||
interface |
MeshPointProjectBuilder
Represents a
MeshPointProjectBuilder
To create a new instance of this class, use MeshPointCollection.createMeshpointProjectBuilder() Created in NX5.0.2 |
||||||
interface |
MeshShellFromSolid
Represents 2d Mesh that follows 3d mesh
To create or edit an instance of this class, use SurfaceCoatBuilder Created in NX7.5.0 |
||||||
interface |
MMCCreateBuilder
Represents a
MMCCreateBuilder which can be used to create or edit
MeshMate objects. |
||||||
interface |
ModelDisplayBuilder
This class provides Model Display Data Support
To create a new instance of this class, use CaePart.createModelDisplayBuilder() Default values. |
||||||
interface |
ModelUpdateCorrelMethodBuilder
Represents a
ModelUpdateCorrelMethodBuilder To create a new instance of this class, use ModelUpdateSolution.createCorrelMethodBuilder() Created in NX7.5.0 |
||||||
interface |
ModelUpdateDesignVariable
Represents a
ModelUpdateDesignVariable , which is a meta-solution used to update finite element models to match real life test data
Created in NX8.0.1 |
||||||
interface |
ModelUpdateDesignVariablesRapidCreateBuilder
This class is the builder that is used for the rapid creation of design variables.
|
||||||
interface |
ModelUpdateOptimOptionsBuilder
Represents a
ModelUpdateOptimOptionsBuilder To create a new instance of this class, use ModelUpdateSolution.createOptimOptionsBuilder() Created in NX7.5.0 |
||||||
interface |
ModelUpdateOptionsBuilder
Represents a
ModelUpdateOptionsBuilder To create a new instance of this class, use ModelUpdateSolution.createOptionsBuilder() Created in NX7.5.0 |
||||||
interface |
ModelUpdateOverallWeightsBuilder
Represents a
ModelUpdateOverallWeightsBuilder To create a new instance of this class, use ModelUpdateSolution.createOverallWeightsBuilder() Created in NX7.5.0 |
||||||
interface |
ModelUpdateSensitivityViewerBuilder
Represents
ModelUpdateSensitivityViewerBuilder To create a new instance of this class, use ModelUpdateSolutionCollection.createSensitivityViewerBuilder(nxopen.cae.ModelUpdateSolution) Created in NX6.0.0 |
||||||
interface |
ModelUpdateSolution
Represents a
ModelUpdateSolution , which is a meta-solution used to update finite element models to match real life test data To create or edit an instance of this class, use ModelUpdateSolutionBuilder Created in NX7.5.0 |
||||||
interface |
ModelUpdateSolutionBuilder
Represents a
ModelUpdateSolutionBuilder To create a new instance of this class, use ModelUpdateSolutionCollection.createSolutionBuilder(nxopen.cae.ModelUpdateSolution) Created in NX7.5.0 |
||||||
interface |
ModifiableFEModelOccAttribute
This class represents an Interface to the Finite Element Model.
|
||||||
interface |
MultipleElementCreateBuilder
Represents a
MultipleElementCreateBuilder which can be used to create
mutiple elements in one efficient opertation. |
||||||
interface |
MultipleNodeCreateBuilder
Represents a
MultipleNodeCreateBuilder which can be used to create
mutiple nodes in one efficient opertation. |
||||||
interface |
NodeAlignBuilder
Represents a
NodeAlignBuilder
To create a new instance of this class, use NodeElementManager.createNodeAlignBuilder() Created in NX5.0.0 |
||||||
interface |
NodeAssociationBuilder
Represents a
NodeAssociationBuilder
To create a new instance of this class, use NodeElementManager.createNodeAssociationBuilder() Created in NX9.0.0 |
||||||
interface |
NodeCreateBuilder
Represents a
NodeCreateBuilder . |
||||||
interface |
NodeDeleteBuilder
Represents a
NodeDeleteBuilder
To create a new instance of this class, use NodeElementManager.createNodeDeleteBuilder() Created in NX5.0.0 |
||||||
interface |
NodeDissociationBuilder
Represents a
NodeDissociationBuilder
To create a new instance of this class, use NodeElementManager.createNodeDissociationBuilder() Created in NX9.0.0 |
||||||
interface |
NodeElementInfoBuilder
Represents a
NodeElementInfoBuilder
To create a new instance of this class, use NodeElementInfoManager.createNodeElementInfoBuilder() Created in NX5.0.0 |
||||||
interface |
NodeModifyLabelBuilder
Represents a
NodeModifyLabelBuilder
To create a new instance of this class, use NodeElementManager.createNodeModifyLabelBuilder() Created in NX5.0.0 |
||||||
interface |
NodeProjectBuilder
Represents a
NodeProjectBuilder
To create a new instance of this class, use NodeElementManager.createNodeProjectBuilder() Created in NX8.5.0 |
||||||
interface |
NodeReflectBuilder
Represents a
NodeReflectBuilder
To create a new instance of this class, use NodeElementManager.createNodeReflectBuilder() Created in NX5.0.0 |
||||||
interface |
NodeRotateBuilder
Represents a
NodeRotateBuilder
To create a new instance of this class, use NodeElementManager.createNodeRotateBuilder() Created in NX5.0.0 |
||||||
interface |
NodesBetweenNodesBuilder
Represents a
NodesBetweenNodesBuilder
To create a new instance of this class, use NodeElementManager.createNodesBetweenNodesBuilder() Created in NX5.0.0 |
||||||
interface |
NodesOnCurveBuilder
Represents a
NodesOnCurveBuilder
To create a new instance of this class, use NodeElementManager.createNodesOnCurveBuilder() Created in NX5.0.0 |
||||||
interface |
NodesRepositionBuilder
Represents a
NodesRepositionBuilder
To create a new instance of this class, use NodeElementManager.createNodesRepositionBuilder() Created in NX6.0.2 |
||||||
interface |
NodeTranslateBuilder
Represents a
NodeTranslateBuilder
To create a new instance of this class, use NodeElementManager.createNodeTranslateBuilder() Created in NX5.0.0 |
||||||
interface |
NxBcPlotContours
Represents a
NxBcPlotContours object returned from SimBcPlotContoursBuilder.createPlotObject() in SimBcPlotContoursBuilder . |
||||||
interface |
OneDimensionalElementSplitBuilder
Represents a
OneDimensionalElementSplitBuilder
To create a new instance of this class, use NodeElementManager.createOneDimensionalElementSplitBuilder() Created in NX8.5.0 |
||||||
interface |
PolygonFaceOnMeshBuilder
Builder for creating Polygon Face On Mesh
To create a new instance of this class, use AbstractionManager.createPolygonFaceOnMeshBuilder() Created in NX7.5.2 |
||||||
interface |
Post3DGraphBuilder
Represents a
Post3DGraphBuilder
This is an abstract class and cannot be instantiated Created in NX10.0.0 |
||||||
interface |
PostGraph
This class provides interfaces to query graph attributes
An instance of this class can not be obtained . |
||||||
interface |
PostGraphAcrossIterationsBuilder
Represents a
PostGraphAcrossIterationsBuilder
This is an abstract class and cannot be instantiated Created in NX9.0.0 |
||||||
interface |
PostGraphAlongPathBuilder
Represents a
PostGraphAlongPathBuilder
This is an abstract class and cannot be instantiated Created in NX9.0.0 |
||||||
interface |
PostGraphBuilder
Represents a
PostGraphBuilder
This is an abstract class and cannot be instantiated Created in NX9.0.0 |
||||||
interface |
PostGraphOrbitBuilder
Represents a
PostGraphOrbitBuilder
This is an abstract class and cannot be instantiated Created in NX9.0.0 |
||||||
interface |
PreTestDofSet
Represents Dof Set within a pre-test setup
To create or edit an instance of this class, use PreTestDofSetBuilder Created in NX7.5.0 |
||||||
interface |
PreTestDofSetBuilder
Represents a
PreTestDofSet builder To create a new instance of this class, use PreTestSolutionCollection.createPretestDofsetBuilder(nxopen.cae.PreTestDofSet) Created in NX7.5.0 |
||||||
interface |
PreTestExciterConfig
Represent a exciter selection configuration
To create or edit an instance of this class, use PreTestExciterConfigBuilder Created in NX8.0.0 |
||||||
interface |
PreTestExciterConfigBuilder
Represents a
PreTestExciterConfig builder To create a new instance of this class, use PreTestSolutionCollection.createExciterConfigBuilder(nxopen.cae.PreTestExciterConfig) Default values. |
||||||
interface |
PreTestExportUnvBuilder
This is a manager to the
PreTestExportUnvBuilder class. |
||||||
interface |
PreTestSensorConfig
Represent a sensor selection configuration
To create or edit an instance of this class, use PreTestSensorConfigBuilder Created in NX7.5.0 |
||||||
interface |
PreTestSensorConfigBuilder
Represents a
PreTestSensorConfig builder To create a new instance of this class, use PreTestSolutionCollection.createSensorConfigBuilder(nxopen.cae.PreTestSensorConfig) Default values. |
||||||
interface |
PreTestSolution
Represents a pre-test setup
To create or edit an instance of this class, use PreTestSolutionBuilder Created in NX7.5.0 |
||||||
interface |
PreTestSolutionBuilder
Represents a
PreTestSolution builder To create a new instance of this class, use PreTestSolutionCollection.createPretestBuilder(nxopen.cae.PreTestSolution) Created in NX7.5.0 |
||||||
interface |
PrimitiveMesh
Represents Primitive Mesh
To create or edit an instance of this class, use PrimitiveMeshBuilder Created in NX7.5.0 |
||||||
interface |
PrimitiveMeshBuilder
Represents Primitive Mesh
Used to create a
CAE.Mesh
To create a new instance of this class, use MeshManager.createPrimitiveMeshBuilder(nxopen.cae.Mesh) Created in NX7.5.1 |
||||||
interface |
ProjectNodesToCadGeometryBuilder
Allows you to query the mesh nodes that are off the underlying Cad geometry by a given tolerance,
and if requested this builder can adjust the node locations to put them back on
to the underlying Cad geometry.
|
||||||
interface |
ReassignElementsBuilder
Represents a
ReassignElementsBuilder
To create a new instance of this class, use MeshManager.createReassignElementsBuilder() Created in NX5.0.0 |
||||||
interface |
Result
This class provides interfaces to query analysis results. |
||||||
interface |
ResultAccess
Represents a specific result state for a given
Result . |
||||||
interface |
ResultMeasure
Represents a ResultMeasure class
ResultMeasure . |
||||||
interface |
ResultParameters
This class is worked as a packet of information that can be either be used to change result state or pass around for information exchange between two
ResultAccess objects. |
||||||
interface |
ResultParametersWithProbe
To obtain an instance of this class use Session.resultManager() . |
||||||
interface |
ResultProbe
Result Probe Object.
|
||||||
interface |
ResultProbeBuilder
Result probe Builder
An instance of this class can not be obtained . |
||||||
interface |
ResultsCombinationBuilder
Represents a
ResultsCombinationBuilder To obtain an instance of this class use Session.resultManager() . |
||||||
interface |
ResultsEnvelopeBuilder
Represents a
ResultsEnvelopeBuilder To obtain an instance of this class use Session.resultManager() . |
||||||
interface |
ResultsManipulationBuilder
Represents an abstract
ResultsManipulationBuilder This is an abstract class and cannot be instantiated Created in NX7.5.2 |
||||||
interface |
ResultsReductionBuilder
Represents a
ResultsReductionBuilder To obtain an instance of this class use Session.resultManager() . |
||||||
interface |
ResultType
This class represents a result type from a result file.
|
||||||
interface |
ResultVariable
Controls Result Exp Object.
|
||||||
interface |
SelectCAEBody
Represents a single object selection.
|
||||||
interface |
SelectCAEBodyList
Represents a list of objects on a selection list.
|
||||||
interface |
SelectCAEEdge
Represents a single object selection.
|
||||||
interface |
SelectCAEEdgeList
Represents a list of objects on a selection list.
|
||||||
interface |
SelectCAEFace
Represents a single object selection.
|
||||||
interface |
SelectCAEFaceList
Represents a list of objects on a selection list.
|
||||||
interface |
SelectElementsBuilder
Represents a
SelectElementsBuilder
To create a new instance of this class, use SelectElementsManager.createSelectElementsBuilder() Created in NX5.0.0 |
||||||
interface |
SelectFEElemFaceList
Represents a list of objects on a selection list.
|
||||||
interface |
SelectFENodeList
Represents a list of objects on a selection list.
|
||||||
interface |
SelectMeshList
Represents a list of objects on a selection list.
|
||||||
interface |
SetManager
Represents a group of CAE object sets.
|
||||||
interface |
ShapeMetricViewerBuilder
Represents the correlation Shape metrics viewer builder
To create a new instance of this class, use CorrelSolutionCollection.createShapeMetricViewerBuilder(nxopen.cae.CorrelSolution) Created in NX7.5.0 |
||||||
interface |
Shell2SolidBuilder
Represents 3D Tet Mesh
Used to create a
CAE.Mesh3d
To create a new instance of this class, use MeshManager.createShell2solidBuilder(nxopen.cae.Mesh3d) Created in NX6.0.0 |
||||||
interface |
ShellEADBuilder
This class provides Shell Associated Data Support
To create a new instance of this class, use NodeElementManager.createShellEadBuilder() Default values. |
||||||
interface |
ShowAdjacentBuilder
Represents a
ShowAdjacentBuilder
To create a new instance of this class, use ShowHideManager.createShowAdjacentBuilder() Created in NX5.0.0 |
||||||
interface |
ShowHideBuilder
Represents a
ShowHideBuilder
To create a new instance of this class, use ShowHideManager.createShowHideBuilder() Created in NX5.0.0 |
||||||
interface |
ShowOnlyBuilder
Represents a
ShowOnlyBuilder
To create a new instance of this class, use ShowHideManager.createShowOnlyBuilder() Created in NX5.0.0 |
||||||
interface |
SimAutoBcRecipe
Represents a simulation recipe containing the parameters needed
for the generation of a set of face pairs from the faces/bodies in the model
To create a new instance of this class, use SimRecipeCollection.createAutoBcRecipe(java.lang.String, java.lang.String) Created in NX5.0.0 |
||||||
interface |
SimBC
Represents BC class which is a superclass to
SimLoad and SimConstraint . |
||||||
interface |
SimBCBuilder
This is a manager to the
CAE.SimBC class. |
||||||
interface |
SimBCDisplay
Represents a BC display attributes
.
|
||||||
interface |
SimBcPlotContoursBuilder
Represents a
SimBcPlotContoursBuilder builder
which can be used to generate a plot of a SimBC
in the graphics area. |
||||||
interface |
SimBcXyPlotBuilder
Represents a
SimBcXyPlotBuilder builder
which can be used to generate a XY plot of a SimBC
in the graphics area. |
||||||
interface |
SimCondition
This class represents a Condition which defines a state where all or some values of
SimConditionParam are known. |
||||||
interface |
SimConditionParam
This class represents a named measurable quantity.
|
||||||
interface |
SimConditionSeqMgr
This is the manager for Condition Sequences.
|
||||||
interface |
SimConditionSequence
This class represents a time history of
SimCondition . |
||||||
interface |
SimConditionTimeStep
This class represents a step in the time history of a
SimConditionSequence . |
||||||
interface |
SimConstraint
Represents a constraint
To create a new instance of this class, use SimConstraintCollection.createConstraint(java.lang.String, java.lang.String) Created in NX4.0.0 |
||||||
interface |
SimGroupContainer
Represents UGS::CaeSim::LbcGroupContainer
This is an abstract class . |
||||||
interface |
SimLbcFolder
Represents a folder object in the .sim files
To create a new instance of this class, use SimLbcFolderCollection.createFolder(java.lang.String, nxopen.cae.SimLbcFolder.Type, nxopen.cae.SimLbcFolder) Created in NX9.0.0 |
||||||
interface |
SimLoad
Represents a load
To create a new instance of this class, use SimLoadCollection.createLoad(java.lang.String, java.lang.String) Created in NX4.0.0 |
||||||
interface |
SimLoadRecipe
This is the class handling the attributes of a load recipe.
|
||||||
interface |
SimLoadRecipeMapEntry
These objects represent one line in a
SimLoadRecipe 's mapping. |
||||||
interface |
SimLoadRecipeMapping
This is the class handling the mapping of a certain load type of a load recipe.
|
||||||
interface |
SimLoadRecipeSource
This is the class handling the attributes of a source used by a load recipe.
|
||||||
interface |
SimLoadSetBuilder
Represents a
SimLoadSetBuilder builder To create a new instance of this class, use SimSimulation.createLoadSetBuilder(java.lang.String, java.lang.String, nxopen.cae.SimLoadSet, int) Created in NX10.0.0 |
||||||
interface |
SimMotionLoadsBuilder
Represents a
SimMotionLoadsBuilder
To create a new instance of this class, use SimSimulation.createMotionLoadsBuilder() Created in NX5.0.1 |
||||||
interface |
SimMotionLoadsListItemBuilder
Represents a
SimMotionLoadsListItemBuilder
To create a new instance of this class, use SimSimulation.createMotionLoadsListItemBuilder() Created in NX5.0.1 |
||||||
interface |
SimPart
Represents an NX part of type .sim.
|
||||||
interface |
SimRecipe
This is an abstract class.
|
||||||
interface |
SimResultReference
Represents a Result Reference in the .sim files
For more information, refer to the Solver language documentation
in the
interface SimSimulation
This is the root object in a .sim file.
| ||||||
interface |
SimSimulationObject
Represents a simulation object
For more information, refer to the Solver language documentation
in the
interface SimSolution
Represents a solution in the .sim files
For more information, refer to the Solver language documentation
in the
interface SimSolutionStep
Represents a subcase/step in a solution
For more information, refer to the Solver language documentation
in the
interface SketchCurves
Represents a Beam Cross Section
This is an abstract class . | ||||||
interface |
SolidPropertyCheckBuilder
Represents a
SolidPropertyCheckBuilder
To create a new instance of this class, use nxopen.cae.modelcheckManager#createSolidPropertyCheckBuilder Created in NX5.0.1 |
||||||
interface |
SolutionManager
Represents
SolutionManager
To create a new instance of this class, use SimSimulation.createSolutionManager() Created in NX10.0.0 |
||||||
interface |
SolutionResult
Represents analysis results for a given
SimSolution . |
||||||
interface |
SolverAppendOption
This class provides access to the append option setting for importing solver specific data into existing Fem/Sim
Not support KF. |
||||||
interface |
SpiderElementBuilder
Represents a
SpiderElementBuilder
To create a new instance of this class, use NodeElementManager.createSpiderElementBuilder() Created in NX5.0.1 |
||||||
interface |
SpringEADBuilder
This class provides Spring Associated Data Support
To create a new instance of this class, use NodeElementManager.createSpringEadBuilder() Default values. |
||||||
interface |
StandardBeamSection
Represents a Standard Beam Cross Section
To create or edit an instance of this class, use StandardBeamSectionBuilder Created in NX7.5.0 |
||||||
interface |
StandardBeamSectionBuilder
Represents a
StandardBeamSectionBuilder
To create a new instance of this class, use BeamSectionCollection.createStandardBeamSectionBuilder(nxopen.cae.StandardBeamSection) Created in NX7.5.0 |
||||||
interface |
StepManager
Represents
StepManager
To create a new instance of this class, use SimSimulation.createStepManager(nxopen.cae.SimSolution) Created in NX10.0.0 |
||||||
interface |
SuppressHoleBuilder
Builder for creating Hole Suppression Hole
To create a new instance of this class, use AbstractionManager.createSuppressHoleBuilder() Default values. |
||||||
interface |
SurfaceCoatBuilder
Builder for creating Surface Coat
To create a new instance of this class, use MeshManager.createSurfaceCoatBuilder(nxopen.cae.MeshShellFromSolid) Created in NX6.0.1 |
||||||
interface |
SweepBetweenMeshBuilder
Deprecated.
Deprecated in NX10.0.0. Use
CAE.Mesh3dHexBuilder .
|
||||||
interface |
SweptMesh
Represents swept Mesh
To create or edit an instance of this class, use Mesh3dHexBuilder Created in NX6.0.0 |
||||||
interface |
ThicknessBuilder
Represents a
ThicknessBuilder
To create a new instance of this class, use NodeElementInfoManager.createThicknessBuilder(nxopen.cae.Mesh) Created in NX6.0.1 |
||||||
interface |
ThicknessPlotContours
Represents a
ThicknessPlotContours object returned from ThicknessPlotContoursBuilder.createPlotObject()
in ThicknessPlotContoursBuilder . |
||||||
interface |
ThicknessPlotContoursBuilder
Represents a
ThicknessPlotContoursBuilder builder
which can be used to generate a plot of a SimBC in the graphics area. |
||||||
interface |
TransientResultsReductionBuilder
Represents a
TransientResultsReductionBuilder To obtain an instance of this class use Session.resultManager() . |
||||||
interface |
UnStitchEdgeBuilder
Represents a
UnStitchEdgeBuilder To create a new instance of this class, use FemPart.createUnStitchEdgeBuilder() Created in NX6.0.0 |
||||||
interface |
UserDefinedSolidBeamSection
Represents a User-Defined Solid Beam Cross Section
To create or edit an instance of this class, use UserDefinedSolidBeamSectionBuilder Created in NX7.5.0 |
||||||
interface |
UserDefinedSolidBeamSectionBuilder
Represents a
UserDefinedSolidBeamSectionBuilder
To create a new instance of this class, use BeamSectionCollection.createUserDefinedSolidBeamSectionBuilder(nxopen.cae.UserDefinedSolidBeamSection) Created in NX7.5.0 |
||||||
interface |
ViewLaminateBuilder
Represents a View Laminate Builder.
|
||||||
interface |
WeldBuilder
Represents a
WeldBuilder
To create a new instance of this class, use MeshManager.createWeldBuilder(nxopen.cae.Mesh) Created in NX7.5.2 |
||||||
interface |
WeldRow
Represents a CAE weld row
.
|
Modifier and Type | Field and Description |
---|---|
TaggedObject |
SetObject.obj
the object
|
Modifier and Type | Method and Description |
---|---|
TaggedObject[] |
CADModeling.createCurvesFromPolygonFace(Part cadPart,
CAEFace polygonFace)
CREATE curves from polygon face in part
License requirements: nx_masterfem ("Finite Element Modeling") . |
TaggedObject |
ManualMorphBuilder.createMapData()
Creates the object for user defined manual maps
License requirements: nx_masterfem ("Finite Element Modeling") . |
TaggedObject |
SimSolutionStep.find(String journalIdentifier)
Returns the children of the Solution Step of the given Identifier
License requirements: None. |
TaggedObject |
SimSolution.find(String journalIdentifier)
Returns the children of the Solution of the given Identifier
License requirements: None. |
TaggedObject |
Result.find(String journalIdentifier)
Returns a
BaseLoadcase
License requirements: None. |
TaggedObject |
FEModelOccurrence.find(String journalIdentifier)
Finds the object within the
FEModelOccurrence context,
with the given identifier as recorded in a journal. |
TaggedObject |
FEModel.find(String journalIdentifier)
Finds the
NXObject with the given identifier as recorded in a journal. |
TaggedObject |
BaseLoadcase.find(String journalIdentifier)
Returns a
BaseIteration
License requirements: None. |
TaggedObject |
BaseIteration.find(String journalIdentifier)
Returns a
BaseResultType
License requirements: None. |
TaggedObject |
AssyFEModel.find(String journalIdentifier)
Finds the
NXObject with the given identifier as recorded in a journal. |
TaggedObject |
ResultManager.findObject(String journalIdentifier)
Returns a
Result
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") Created in NX7.5.1 |
TaggedObject |
IMeshManager.findObject(String journalIdentifier)
Finds the
Mesh with the given identifier as recorded in a journal. |
TaggedObject |
LaminateRandomEventBuilder.function()
Deprecated.
Deprecated in NX10.0.0. Use
LaminateDynamicEventBuilder.userFunction() instead.
|
TaggedObject |
DurabilityFunctionExcitationBuilder.function()
Returns the function.
|
TaggedObject[] |
GroupMethod.getEntities()
Returns the resultant entities
License requirements: None. |
TaggedObject[] |
ManualMorphBuilder.getManualMapList()
Returns the list of tags of manual map objects created by user
License requirements: None. |
TaggedObject |
ManualMorphBuilder.getMapByName(TaggedObject[] pMapTags,
String mapName)
Returns the tag of user map object by its name
License requirements: nx_masterfem ("Finite Element Modeling") . |
TaggedObject[] |
CaeDOFSetCollection.queryDofsetList()
Query DOFSets list
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") . |
TaggedObject |
LaminateDynamicEventBuilder.userFunction()
Returns the function.
|
Modifier and Type | Method and Description |
---|---|
boolean |
ManualMorphBuilder.checkNodeToEdgeMapForPlanarAnalysis(TaggedObject[] pEdgeTags,
FENode[] pNodeTags)
Checks out of plane displacement of nodes for Node to Edge Mapping
License requirements: nx_masterfem ("Finite Element Modeling") . |
boolean |
ManualMorphBuilder.checkNodeToFaceMapForPlanarAnalysis(TaggedObject faceTag,
FENode[] pNodeTags)
Checks out of plane displacement of nodes for Node to Face Mapping
License requirements: nx_masterfem ("Finite Element Modeling") . |
boolean |
ManualMorphBuilder.checkNodeToPointMapForPlanarAnalysis(TaggedObject pointTag,
TaggedObject nodeTag)
Checks out of plane displacement of nodes for Node to Point Mapping
License requirements: nx_masterfem ("Finite Element Modeling") . |
void |
ManualMorphBuilder.clearGeometryOfMap(TaggedObject mapDataTag)
Removes all the selected geometry from the manual map
License requirements: nx_masterfem ("Finite Element Modeling") . |
void |
ManualMorphBuilder.clearNodesOfMap(TaggedObject mapDataTag)
Removes all the selected nodes from the manual map
License requirements: nx_masterfem ("Finite Element Modeling") . |
AutoMacViewerBuilder |
PreTestSolutionCollection.createAutoMacViewerBuilder(TaggedObject macInput)
Creates an AutoMAC results display builder
License requirements: nx_correl_base ("FE Correlation") . |
CfdLocalResolutionConstraintBuilder |
CfdLocalResolutionConstraintCollection.createBuilder(TaggedObject recipe)
Creates a local resolution constraint builder
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling") . |
CfdContactPreventionConstraintBuilder |
CfdContactPreventionConstraintCollection.createBuilder(TaggedObject recipe)
Creates a local resolution constraint builder
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling") . |
LaminateDampingFactorBuilder |
LaminateDynamicSimCollection.createDampingFactorBuilder(TaggedObject contextObjectTag)
Creates a builder for the laminate damping factor.
|
ThicknessBuilder.ElementThicknessData |
ThicknessBuilder.getElementThickness(TaggedObject element)
The method to access nodal thickness at corner nodes of an element, If found
the output array will have either 4 values for quad elements and 3 values
for tria elements
License requirements: nx_masterfem ("Finite Element Modeling") . |
TaggedObject |
ManualMorphBuilder.getMapByName(TaggedObject[] pMapTags,
String mapName)
Returns the tag of user map object by its name
License requirements: nx_masterfem ("Finite Element Modeling") . |
ThicknessBuilder.NodeThicknessData |
ThicknessBuilder.getNodeThickness(TaggedObject node)
The method to access average nodal thickness
License requirements: nx_masterfem ("Finite Element Modeling") . |
void |
ManualMorphBuilder.removeMapData(TaggedObject mapTag)
Removes specified manual map object from map tag array
License requirements: nx_masterfem ("Finite Element Modeling") . |
void |
ResultProbeBuilder.setEntityObjects(TaggedObject[] entityObjs)
Sets the entity objects for extracting result data.
|
void |
PostGraphBuilder.setEntityObjects(TaggedObject[] entityObjs)
Sets the entity objects for extracting result data.
|
void |
LaminateRandomEventBuilder.setFunction(TaggedObject functionTag)
Deprecated.
Deprecated in NX10.0.0. Use
LaminateDynamicEventBuilder.setUserFunction(nxopen.TaggedObject) instead.
|
void |
DurabilityFunctionExcitationBuilder.setFunction(TaggedObject functionTag)
License requirements: nx_adv_durability ("NX Advanced Durability") . |
void |
DurabilityDamageEvaluationBuilder.setFunctionData(TaggedObject functionTag,
int numberOfOccurrences,
double lateralLoadingFactor,
double scaleFactor)
Sets the function data.
|
void |
ManualMorphBuilder.setGeometrySelection(TaggedObject mapDataTag,
TaggedObject[] pGeomTags)
Sets the the geometry selected for manual map
License requirements: nx_masterfem ("Finite Element Modeling") . |
void |
ManualMorphBuilder.setGeometrySelection(TaggedObject mapDataTag,
TaggedObject[] pGeomTags)
Sets the the geometry selected for manual map
License requirements: nx_masterfem ("Finite Element Modeling") . |
void |
ManualMorphBuilder.setMapData(TaggedObject mapTag)
Sets the new manual map object tag to map tag array
License requirements: nx_masterfem ("Finite Element Modeling") . |
void |
ManualMorphBuilder.setMapDirection(TaggedObject mapDataTag,
double[] direction)
Sets the direction along which nodes will be mapped on to selected geometry
License requirements: nx_masterfem ("Finite Element Modeling") . |
void |
ManualMorphBuilder.setMapDirectionMethod(TaggedObject mapDataTag,
int vecMethod)
Sets the vector creation method used to define direction of manual map
License requirements: nx_masterfem ("Finite Element Modeling") . |
void |
ManualMorphBuilder.setMapDirectionPoint(TaggedObject mapDataTag,
double[] pointCoords)
Sets the start point of vector chosen to define direction of manual map
License requirements: nx_masterfem ("Finite Element Modeling") . |
void |
ManualMorphBuilder.setMapMethod(TaggedObject mapDataTag,
ManualMorphBuilder.MapMethod mapMethod)
Sets the method chosen to apply node mapping on selected geometry
License requirements: nx_masterfem ("Finite Element Modeling") . |
void |
ManualMorphBuilder.setMapName(TaggedObject mapDataTag,
String mapName)
Sets the name of manual mapping
License requirements: nx_masterfem ("Finite Element Modeling") . |
void |
ManualMorphBuilder.setMapType(TaggedObject mapDataTag,
ManualMorphBuilder.MapType mapType)
Sets the manual map type - Stationary, Node-to-Edge, Node-to-Face
License requirements: nx_masterfem ("Finite Element Modeling") . |
void |
ManualMorphBuilder.setNodeSelection(TaggedObject mapDataTag,
FENode[] pNodeTags)
Sets the node selected for manual map
License requirements: nx_masterfem ("Finite Element Modeling") . |
void |
ManualMorphBuilder.setNodeToCurveEndPointMap(TaggedObject mapDataTag,
FENode[] pVertexNodeTags)
Sets the node-to-CurveEndPoint map for node-to-edge mapping type
License requirements: nx_masterfem ("Finite Element Modeling") . |
void |
ManualMorphBuilder.setNodeToVertexMap(TaggedObject mapDataTag,
FENode[] pVertexNodeTags)
Sets the node-to-vetex map for node-to-edge mapping type
License requirements: nx_masterfem ("Finite Element Modeling") . |
void |
LaminateDynamicEventBuilder.setUserFunction(TaggedObject userFunction)
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced") . |
void |
ManualMorphBuilder.setVertexNode(TaggedObject mapDataTag,
boolean isVertexNode)
Sets the flag for node-to-vertex map for node-to-edge mapping type
License requirements: nx_masterfem ("Finite Element Modeling") . |
Constructor and Description |
---|
SetObject(TaggedObject objInitial,
CaeSetObjectSubType subTypeInitial,
int subIdInitial)
Constructor for the SetObject object.
|
Modifier and Type | Interface and Description |
---|---|
interface |
ArrayRecord2D
Manages the 2d array record
Not support KF. |
interface |
ArrayRecord2DEven
Manages the 2d array record with even abscissa data
Not support KF. |
interface |
ArrayRecord3D
Manages the 3d array record
Not support KF. |
interface |
BaseRecord
Manages the base record.
|
interface |
BaseUnit
Manages the base unit
Not support KF. |
interface |
ComplexSectionBasedMatrixRecord
Represents a section based matrix record which has complex data values.
|
interface |
RealSectionBasedMatrixRecord
Represents a section based matrix record which has real data values.
|
interface |
SectionBasedMatrixRecord
Represents a kind of record data could be displayed by 3D graphing.
|
Modifier and Type | Interface and Description |
---|---|
interface |
AlignShellElementNormalBuilder
Represents a
AlignShellElementNormalBuilder builder used to align the normals of
connected shell elements with a seed shell element. |
interface |
DuplicateElementsCheckBuilder
Represents a
DuplicateElementsCheckBuilder
to check for duplicate elements within the candidate elements. |
interface |
DuplicateNodesCheckBuilder
Represents a
DuplicateNodesCheckBuilder
to check for duplicate nodes within the candidate nodes. |
interface |
ElementEdgeCheckBuilder
Represents a
ElementEdgeCheckBuilder which can be
used to detect free element edges or non-manifold edges. |
interface |
ElementMaterialOrientationCheckBuilder
Represents a
ElementMaterialOrientationCheckBuilder
used to check the material orientation for shell and solid elements. |
interface |
ElementQualityCheckBuilder
Represents a
ElementQualityCheckBuilder to
perform quality checking on the candidate elements. |
interface |
ElementQualitySetting
Represents element quality check settings of a specified solver language.
|
interface |
ElementSpecificTestValue
Represents the quality setting for a specfied element reference
Not to support KF . |
interface |
FaceClearanceCheckBuilder
Represents a
FaceClearanceCheckBuilder to perform polygon face
interference or clearance check. |
interface |
ModelSetupCheckBuilder
Represents a
ModelSetupCheckBuilder which can be
used to check if the active SimSolution contains all the necessary
items for the analysis, including elements, loads, constraints and materials. |
interface |
QualityTestValue
Represents quality test settings of a specified test type
Not to support KF . |
interface |
ReverseShellElementNormalBuilder
Represents a
ReverseShellElementNormalBuilder used to reverse normals
for specified shell elements. |
Modifier and Type | Interface and Description |
---|---|
interface |
DAOConstraint
Represents a
DAOConstraint . |
interface |
DAOConstraintBuilder
Represents a
DAOConstraintBuilder . |
interface |
DAODesignVariable
Represents a
DAODesignVariable . |
interface |
DAODesignVariableBuilder
Represents a
DAODesignVariableBuilder . |
interface |
DAOObjective
Represents a
DAOObjective . |
interface |
DAOSolution
Represents a
DAOSolution . |
interface |
DAOSolutionBuilder
Represents a
DAOSolutionBuilder . |
interface |
DAOStopCondition
Represents a
DAOStopCondition . |
interface |
NameDescription
.
|
interface |
TBSBaseDesignVariableBuilder
Represents the builder of
TBSDesignVariable This is an abstract class, and cannot be created. |
interface |
TBSCastCondition
|
interface |
TBSCheckDOF
Represents the restriction of dispacement in the coordinate direction of the referenced coordinate system .
|
interface |
TBSConstraint
Represents the design constraint, which is defined with
TBSDesignVariable To create or edit an instance of this class, use TBSConstraintBuilder Created in NX8.0.0 |
interface |
TBSConstraintBuilder
Represents the builder of
TBSConstraint To create a new instance of this class, use TBSOptimizationManager.createResponseConstraintBuilder(nxopen.cae.optimization.TBSConstraint) Created in NX8.0.0 |
interface |
TBSDesignArea
Represents the design area .
|
interface |
TBSDesignResponse
Represents the design response referenced by
TBSConstraint and
TBSObjectives To create or edit an instance of this class, use TBSDesignResponseBuilder Created in NX8.0.0 |
interface |
TBSDesignResponseBuilder
Represents the builder of
TBSDesignResponse To create a new instance of this class, use TBSOptimizationManager.createDesignResponseBuilder(nxopen.cae.optimization.TBSDesignResponse) Created in NX8.0.0 |
interface |
TBSDesignVariable
Represents the design variable referenced by
TBSConstraint and
TBSObjectives To create or edit an instance of this class, use TBSDesignVariableBuilder Created in NX8.0.0 |
interface |
TBSDesignVariableBuilder
Represents the builder of
TBSDesignVariable To create a new instance of this class, use TBSOptimizationManager.createDesignVariableBuilder(nxopen.cae.optimization.TBSDesignVariable) Created in NX8.0.0 |
interface |
TBSEigenvalueOptimizationParameters
Represents the parameters to control an eigenvalue optimization .
|
interface |
TBSGroupDefinition
Represents a group of nodes or elements .
|
interface |
TBSLoadCase
Represents the load case
To create a new instance of this class, use TBSOptimizationManager.createLoadCase() Created in NX8.0.0 |
interface |
TBSLoadCaseManager
Managers load cases .
|
interface |
TBSMeshSmooth
Represents the mesh smooth .
|
interface |
TBSObjectives
Represents the objective functions of an optimization .
|
interface |
TBSOptimizationParameters
Represents the parameters to control an optimization
This is an abstract class, and cannot be created. |
interface |
TBSOptimizationSolution
Represents the solution to contain optimization setting
This is an abstract class, and cannot be created. |
interface |
TBSOptimizationSolutionBuilder
Represents the abstract builder of
TBSOptimizationSolution . |
interface |
TBSOutputControlOptions
Represents the output result control options of the optimization .
|
interface |
TBSRestrictArea
Represents the restrictions for the design variable in an optimization
To create or edit an instance of this class, use TBSRestrictAreaBuilder Created in NX8.0.0 |
interface |
TBSRestrictAreaBuilder
Represents the builder of
TBSRestrictArea This is an abstract class, and cannot be created. |
interface |
TBSShapeLinkCondition
Represents the definition of link condition for shape restriction .
|
interface |
TBSShapeOptimizationParameters
Represents the control parameters of shape optimization .
|
interface |
TBSShapeOptimizationSolution
Represents a shape optimization solution
To create or edit an instance of this class, use TBSShapeOptimizationSolutionBuilder Created in NX8.5.0 |
interface |
TBSShapeOptimizationSolutionBuilder
Represents the builder of
TBSShapeOptimizationSolution . |
interface |
TBSShapeRestrictArea
Represents the restrictions of the design variable in Shape optimization
To create or edit an instance of this class, use TBSShapeRestrictAreaBuilder Created in NX8.5.0 |
interface |
TBSShapeRestrictAreaBuilder
Represents the builder of
TBSShapeRestrictArea To create a new instance of this class, use TBSOptimizationManager.createShapeRestrictAreaBuilder(nxopen.cae.optimization.TBSShapeRestrictArea) Created in NX8.5.0 |
interface |
TBSSingleObjective
Represents a single objective
To create a new instance of this class, use TBSOptimizationManager.createSingleObjective(nxopen.cae.optimization.TBSDesignResponse, double, double) Created in NX8.0.0 |
interface |
TBSSmooth
Represents the parameters that control the generation of surfaces by optimization
To create or edit an instance of this class, use TBSSmoothBuilder Created in NX8.0.0 |
interface |
TBSSmoothBuilder
Represents the builder of
TBSSmooth . |
interface |
TBSStopCondition
Represents the condtion to end an optimization .
|
interface |
TBSTestFunction
Represents a test displacement for shape optimization or bead optimization .
|
interface |
TBSTopologyControllerOptimizationParameters
Represents the parameters to control an optimization in controller strategy .
|
interface |
TBSTopologyLinkCondition
Represents the definition of symmetry and link conditions for topology optimization .
|
interface |
TBSTopologyOptimizationSolution
Represents the topology optimization solution
To create or edit an instance of this class, use TBSTopologyOptimizationSolutionBuilder Created in NX8.0.0 |
interface |
TBSTopologyOptimizationSolutionBuilder
Represents the builder of
TBSTopologyOptimizationSolution . |
interface |
TBSTopologyRestrictArea
Represents the restrictions of the design variable in topology optimization
To create or edit an instance of this class, use TBSTopologyRestrictAreaBuilder Created in NX8.0.0 |
interface |
TBSTopologyRestrictAreaBuilder
Represents the builder of
TBSTopologyRestrictArea To create a new instance of this class, use TBSOptimizationManager.createTopologyRestrictAreaBuilder(nxopen.cae.optimization.TBSTopologyRestrictArea) Created in NX8.0.0 |
interface |
TBSTopologySensitivityOptimizationParameters
Represents the parameters to control an optimization in sensitivity strategy .
|
Modifier and Type | Method and Description |
---|---|
TaggedObject |
TBSOptimizationSolution.find(String journalIdentifier)
Finds the
TaggedObject with the given identifier as recorded in a journal. |
Modifier and Type | Interface and Description |
---|---|
interface |
BaseBuilder
Represents the abstract builder class for all objects defined in response analysis meta solution
This is an abstract class, and cannot be created. |
interface |
CombinationEvaluationOptions
Represents the setting for combination evaluation.
|
interface |
CsdEvaluationSetting
Represents the class of evaluation setting for CSD
To create or edit an instance of this class, use CsdEvaluationSettingBuilder Created in NX6.0.0 |
interface |
CsdEvaluationSettingBuilder
Represents the CSD build
To create a new instance of this class, use EvaluationSettingManager.createCsdEvaluationSettingBuilder(nxopen.cae.responsesimulation.CsdEvaluationSetting) Created in NX6.0.0 |
interface |
CSDExcitation
Represents an CSD excitation.
|
interface |
CSDExcitationBuilder
Represents the manager to
CSDExcitation . |
interface |
DataLocation
Represents the data location to perform evaluation .
|
interface |
DDAMComponentData
Represents an excitation on one specified direction.
|
interface |
DDAMExcitation
Represents an DDAM excitation.
|
interface |
DDAMExcitationBuilder
Represents the manager to
DDAMExcitation . |
interface |
DistributedLoadExcitation
Represents an excitation of distributed-load type
To create or edit an instance of this class, use DistributedLoadExcitationBuilder Created in NX5.0.0 |
interface |
DistributedLoadExcitationBuilder
Represents the manager to
DistributedLoadExcitation . |
interface |
DynamicEvaluationOutputSettings
Represents the output setting for dynamic response evaluation .
|
interface |
DynamicResultEvaluationSetting
Represents the abstract class of evaluation setting for all dynamic results evaluations.
|
interface |
DynamicResultEvaluationSettingBuilder
Represents the abstract builder class of evaluation setting for all dynamic results evaluations.
|
interface |
ElementalFunctionEvaluationSetting
Represents the parameters setting for elemental function evaluation.
|
interface |
ElementalFunctionEvaluationSettingBuilder
This is a manager to the
ElementalFunctionEvaluationSetting class. |
interface |
EvaluationParameters
Represents the evaluation parameters for a response simulation meta solution
Not support KF. |
interface |
EvaluationSetting
Represents the abstract class of all evaluation setting classes.
|
interface |
EvaluationSettingBuilder
Represents the abstract builder class of all evaluation setting classes.
|
interface |
Excitation
Represents the abstract class of dynamic excitations
This is an abstract class, and cannot be created. |
interface |
ExcitationBuilder
Represents the abstract excitation builder class.
|
interface |
ExcitationLocationDefinition
Represents the manager to
CAE.ResponseSimulation.DistributedLoadExcitation . |
interface |
FrequencyDefinition
Represents the frequency setting to perform FRF evaluation .
|
interface |
FrfEvaluationSetting
Represents the parameters setting for FRF results evaluation
To create or edit an instance of this class, use FrfEvaluationSettingBuilder Created in NX5.0.0 |
interface |
FrfEvaluationSettingBuilder
This is a manager to the
FrfEvaluationSetting class. |
interface |
FunctionComponentData
Represents a function component setting of
NodalFunctionExcitation on one direction
Created in NX5.0.0 |
interface |
FunctionEvaluationOutputSettings
Represents the output setting for function response evaluation .
|
interface |
FunctionEvaluationSetting
Represents the abstract class of evaluation setting for function response evaluation
This is an abstract class, and cannot be created. |
interface |
FunctionEvaluationSettingBuilder
Represents the abstract builder class of evaluation setting for function response evaluation
This is an abstract class, and cannot be created. |
interface |
InitialConditions
Represents the initial condition setting of transient event .
|
interface |
LcrResultsEvaluationSetting
Represents the parameters setting of LCR results evaluation.
|
interface |
LcrResultsEvaluationSettingBuilder
This is a manager to the
LcrResultsEvaluationSetting class. |
interface |
ModalProperties
Represents the modal presentation of a response analysis meta solution .
|
interface |
ModalResultsEvaluationSetting
Represents the abstract class of evaluation setting for FRF and transmissibility
This is an abstract class, and cannot be created. |
interface |
ModalResultsEvaluationSettingBuilder
Represents the abstract builder class of evaluation setting for FRF and transmissibility
This is an abstract class, and cannot be created. |
interface |
ModeInitialData
Represents the initial setting for a normal mode .
|
interface |
NodalFunctionEvaluationSetting
Represents the parameters setting of nodal function response evaluation.
|
interface |
NodalFunctionEvaluationSettingBuilder
This is a manager to the
NodalFunctionEvaluationSetting class. |
interface |
NodalFunctionExcitation
Represents the abstract class of nodal function excitation
This is an abstract class, and cannot be created. |
interface |
NodalFunctionExcitationBuilder
Represents the manager to
NodalFunctionExcitation . |
interface |
NormalMode
Represents the properties of one normal mode .
|
interface |
ObjectLabel
Represents the setting to label an object.
|
interface |
PeakValueEvaluationSetting
Represents the parameters setting of peak value evaluation.
|
interface |
PeakValueEvaluationSettingBuilder
This is a manager to the
PeakValueEvaluationSetting class. |
interface |
PhysicalDampingSettings
Represents the physical damping settings for a response simulation meta solution .
|
interface |
PrlResultsEvaluationSetting
Represents the abstract class of evaluation setting for peak value, RMS results
and LCR results.
|
interface |
PrlResultsEvaluationSettingBuilder
Represents the abstract builder class of evaluation setting for peak value, RMS results
and LCR results.
|
interface |
ResponseResultsEvaluationSetting
Represents the parameters setting for response results evaluation.
|
interface |
ResponseResultsEvaluationSettingBuilder
This is a manager to the
ResponseResultsEvaluationSetting class. |
interface |
RmsResultsEvaluationSetting
Represents the parameters setting for RMS results evaluation in response analysis.
|
interface |
RmsResultsEvaluationSettingBuilder
This is a manager to the
RmsResultsEvaluationSetting class. |
interface |
RotationalDDAMExcitation
Represents an DDAM excitation.
|
interface |
RotationalDDAMExcitationBuilder
Represents the manager to
CAE.ResponseSimulation.DDAMExcitation . |
interface |
RotationalNodalFunctionExcitation
Represents a rotational nodal function excitation
To create or edit an instance of this class, use RotationalNodalFunctionExcitationBuilder Created in NX5.0.0 |
interface |
RotationalNodalFunctionExcitationBuilder
Represents the manager to
RotationalNodalFunctionExcitation . |
interface |
RSDisplayObject
Represents a BC display attributes
.
|
interface |
RSEvent
Represents a response analysis event
To create or edit an instance of this class, use RSEventBuilder Created in NX5.0.0 |
interface |
RSEventAttributes
Represents all possible attributes setting for response analysis event .
|
interface |
RSEventBuilder
Represents the manager of CAE.ResponseSimulation.RSEvent.
|
interface |
RSEventOutputSetting
Reprensents the output setting for an event .
|
interface |
RSEventSolverParameters
Represents a response analysis event .
|
interface |
Sensor
Represents a
Sensor
To create or edit an instance of this class, use SensorBuilder Created in NX5.0.0 |
interface |
SensorBuilder
Represents a
SensorBuilder
To create a new instance of this class, use SensorCollection.createSensorBuilder(nxopen.cae.responsesimulation.Sensor) Created in NX5.0.0 |
interface |
SensorEvaluationSetting
Represents the parameters setting for sensor evaluation.
|
interface |
SensorEvaluationSettingBuilder
This is a manager to the
SensorEvaluationSetting class. |
interface |
Solution
Represents a meta solution providing response analysis functionalities in the .sim file
To create or edit an instance of this class, use SolutionBuilder Created in NX5.0.0 |
interface |
SolutionAttributes
Represents attributes setting of response analysis meta solution .
|
interface |
SolutionBuilder
This is a manager to the
Solution class. |
interface |
StaticLoadExcitation
Represents an excitation of static load type
To create or edit an instance of this class, use StaticLoadExcitationBuilder Created in NX6.0.0 |
interface |
StaticLoadExcitationBuilder
Represents the manager to
StaticLoadExcitation . |
interface |
StrainGage
Represents a
StrainGage
To create or edit an instance of this class, use StrainGageBuilder Created in NX6.0.0 |
interface |
StrainGageBuilder
Represents a StrainGageBuilder
To create a new instance of this class, use StrainGageCollection.createStrainGageBuilder(nxopen.cae.responsesimulation.StrainGage) Default values. |
interface |
StrainGageEvaluationSetting
Represents the parameters setting for strain gage evaluation.
|
interface |
StrainGageEvaluationSettingBuilder
This is a manager to the
StrainGageEvaluationSetting class. |
interface |
StrengthResultsEvaluationSetting
Represents parameters setting for strength results evaluation.
|
interface |
StrengthResultsEvaluationSettingBuilder
This is a manager to the
StrengthResultsEvaluationSetting class. |
interface |
TranslationalDDAMExcitation
Represents an DDAM excitation.
|
interface |
TranslationalDDAMExcitationBuilder
Represents the manager to
CAE.ResponseSimulation.DDAMExcitation . |
interface |
TranslationalNodalFunctionExcitation
Represents a translational nodal function excitation
To create or edit an instance of this class, use TranslationalNodalFunctionExcitationBuilder Created in NX5.0.0 |
interface |
TranslationalNodalFunctionExcitationBuilder
Represents the manager to
TranslationalNodalFunctionExcitation . |
interface |
TransmissibilityEvaluationSetting
Represents parameters setting for transmissibility evaluation
To create or edit an instance of this class, use TransmissibilityEvaluationSettingBuilder Created in NX5.0.0 |
interface |
TransmissibilityEvaluationSettingBuilder
This is a manager to the
TransmissibilityEvaluationSetting class. |
interface |
VelocityImpactExcitation
Represents a velocity impact excitation
To create or edit an instance of this class, use VelocityImpactExcitationBuilder Created in NX6.0.0 |
interface |
VelocityImpactExcitationBuilder
Represents a
VelocityImpactExcitationBuilder
To create a new instance of this class, use ExcitationCollection.createVelocityImpactExcitationBuilder(nxopen.cae.responsesimulation.VelocityImpactExcitation) Default values. |
interface |
VelocityImpactParameters
|
Modifier and Type | Interface and Description |
---|---|
interface |
AxisStyleSetting
Represents the axis display style.
|
interface |
BarStyle2DSetting
Represents the 2d bar display style.
|
interface |
BarStyle3DSetting
Represents the 3d bar display style.
|
interface |
BaseBarStyleSetting
Represents the base bar display style.
|
interface |
BaseGridLayoutStyleSetting
Represents the base grid layout display style.
|
interface |
BaseLineStyleSetting
Represents the base line display style.
|
interface |
BasePlateStyleSetting
Represents the base plate display style.
|
interface |
BaseSymbolStyleSetting
Represents the base symbol display style.
|
interface |
BaseTemplate
Manages the display style
Not support KF. |
interface |
BaseTemplateManager
Manages the graph template
Not support KF. |
interface |
BasicModel
Represents a abstract component object on a XY graphing.
|
interface |
CustomTextStyleSetting
Represents the text content definition in title options
Not support KF. |
interface |
DiagramDisplayStyles
Manages the diagram display styles.
|
interface |
GeneralDisplayStyles
Manages the general display styles.
|
interface |
GeneralDisplayStyles2D
Manages the general display styles for 2D plot.
|
interface |
GeneralDisplayStyles3D
Manages the general display styles for 3D plot.
|
interface |
Graph
Manages the display graph.
|
interface |
GridLayoutStyle2DSetting
Represents the 2d grid layout display style.
|
interface |
GridLayoutStyle3DSetting
Represents the 3d grid layout display style.
|
interface |
LineStyle2DSetting
Represents the 2d line display style.
|
interface |
LineStyle3DSetting
Represents the 3d line display style.
|
interface |
MarkerModel
Represents a marker object on a plotting graph.
|
interface |
PlateStyle2DSetting
Represents the 2d plate display style.
|
interface |
PlateStyle3DSetting
Represents the 3d plate display style.
|
interface |
Plot
Manages the plot template
Not support KF. |
interface |
PlotGraphTemplate
Manages the plot graph template.
|
interface |
Preference
Manages the preference data.
|
interface |
ScatterStyleSetting
Represents the scatter display style.
|
interface |
SurfaceStyleSetting
Represents the surface display style.
|
interface |
Template2D
Manages the 2D display style
Not support KF. |
interface |
Template3D
Manages the 3D display style
Not support KF. |
interface |
TextBoxStyleSetting
Represents the text box display style.
|
interface |
TextStyleSetting
Represents the text display style.
|
interface |
WallDisplayStyles
Manages the wall display styles.
|
interface |
WallDisplayStyles3D
Manages the 3D wall display styles.
|
Modifier and Type | Method and Description |
---|---|
TaggedObject |
Plot.find(String journalIdentifier)
Finds the
NXObject with the given identifier as recorded in a journal. |
TaggedObject |
Graph.find(String journalIdentifier)
Finds the
NXObject with the given identifier as recorded in a journal. |
TaggedObject |
BasicModel.find(String journalIdentifier)
Finds the
NXObject with the given identifier as recorded in a journal. |
TaggedObject |
AxisStyleSetting.find(String journalIdentifier)
Finds the
NXObject with the given identifier as recorded in a journal. |
Modifier and Type | Interface and Description |
---|---|
interface |
AcrossVoids
|
interface |
AlongMachineAxisMoveBuilder
Represents Along MCS Axis Move Builder
To create a new instance of this class, use MoveCollection.createAlongMcsAxisMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
AlongMcsAxisMoveBuilder
Represents Along MCS Axis Move Builder
To create a new instance of this class, use MoveCollection.createAlongMcsAxisMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
AlongToolAxisMoveBuilder
Represents the Move To Point Builder
To create a new instance of this class, use MoveCollection.createAlongToolAxisMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
ArcOutputTypeCiBuilder
Represents a ArcOutputTypeCiBuilder .
|
interface |
AreaMillingContainment
Represents a Containment Builder .
|
interface |
AreaMillingNonSteepContainment
Represents a NonSteep Containment Builder .
|
interface |
AreaMillingSteepContainment
Represents a Steep Containment Builder .
|
interface |
Blade
Represents a Blade Rough Drive Method Builder
This is an abstract superclass that has instantaible subclasses . |
interface |
BladeCutLevels
Represents a Blade Cut Levels Builder
This is an abstract class and cannot be instantiated. |
interface |
BladeCutStart
Represents a Blade Rough Drive Method Builder
This is an abstract superclass that has instantaible subclasses . |
interface |
BladeEdge
Represents a BladeEdge Builder .
|
interface |
BladeFinish
Represents a Blade Finish Drive Method Builder .
|
interface |
BladeFinishGeom
Represents BladeFinishGeom Builder .
|
interface |
BladeRough
Represents a Blade Rough Drive Method Builder .
|
interface |
BladeStartPoint
Represents BladeStartPoint Builder .
|
interface |
BlankIpw
Represents the blank ipw builder for blank definition
To obtain an instance of this class use the nxopen.cam.GeometryGroup Created in NX8.0.0 |
interface |
BlendFinish
Represents a Blend Finish Drive Method Builder .
|
interface |
Boundary
Represents a CAM boundary object .
|
interface |
BoundaryMemberSet
Represents a boundary member set .
|
interface |
BoundaryMemberSetList
Represents a list of objects.
|
interface |
BoundaryMillingMemberSet
Represents a boundary member set .
|
interface |
BoundaryMillingSet
Represents a boundary milling set.
|
interface |
BoundarySet
Represents a boundary set.
|
interface |
BoundarySetList
Represents a list of objects.
|
interface |
BoundaryTurnBlank
Represents a
BoundaryTurnBlank
This builder cannot be instantiated separately. |
interface |
BoundaryTurnMemberCorner
Represents a
BoundaryTurnMemberCorner
This builder cannot be instantiated separately. |
interface |
BoundaryTurnMemberEvents
Represents a
BoundaryTurnMemberEvents
This builder cannot be instantiated separately. |
interface |
BoundaryTurnMemberFeed
Represents a
BoundaryTurnMemberFeed
This builder cannot be instantiated separately. |
interface |
BoundaryTurnMemberFineFinishCorner
Represents a
BoundaryTurnMemberFineFinishCorner
This builder cannot be instantiated separately. |
interface |
BoundaryTurnMemberFineFinishOffset
Represents a
BoundaryTurnMemberFineFinishOffset
This builder cannot be instantiated separately. |
interface |
BoundaryTurnMemberOffset
Represents a
BoundaryTurnMemberOffset
This builder cannot be instantiated separately. |
interface |
BoundaryTurnMemberSet
Represents a boundary turning member set .
|
interface |
BoundaryTurnSet
Represents a boundary turning set.
|
interface |
BoundaryTurnVariableStock
Represents a BoundaryTurnVariableStock
This is an abstract class and cannot be instantiated. |
interface |
BoundaryTurnVariableStockSet
Represents a turning boundary variable stock set
To create a new instance of this class, use BoundaryTurnVariableStock.createItemBuilder() Created in NX9.0.2 |
interface |
BoundaryTurnVariableStockSetList
Represents a list of objects.
|
interface |
CAMAttribute
Represents a CAM Feature Attribute
To obtain an instance of this class use nxopen.cam.CAMFeature Created in NX8.0.0 |
interface |
CAMFeatureList
Represents a list of objects.
|
interface |
CamGeneralPropertiesBuilder
Deprecated.
Deprecated in NX9.0.1. Use
GeneralPropertiesBuilder instead.
|
interface |
CAMObject
Represents interface for all CAM Object
To create or edit an instance of this class, use ParamBuilder Created in NX4.0.0 |
interface |
CAMSetup
|
interface |
CavityMilling
Represents a Cavity Milling Operation
To create or edit an instance of this class, use CavityMillingBuilder Created in NX7.5.0 |
interface |
CavityMillingBuilder
Represents a CavityMilling Builder
To create a new instance of this class, use OperationCollection.createCavityMillingBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
CenterlineDrillTurning
Represents a Centerline Drill Turning operation
To create or edit an instance of this class, use CenterlineDrillTurningBuilder Created in NX7.5.0 |
interface |
CenterlineDrillTurningBuilder
Represents a CenterlineDrillTurningBuilder
To create a new instance of this class, use OperationCollection.createCenterlineDrillTurningBuilder(nxopen.cam.CAMObject) Created in NX6.0.0 |
interface |
CenterlineDrillVariableIncrementBuilder
Represents a Turn Avoidance Path Points Builder .
|
interface |
ChamferMilling
Represents a Chamfer Milling Operation
To create or edit an instance of this class, use ChamferMillingBuilder Created in NX9.0.2 |
interface |
ChamferMillingBuilder
Represents a ChamferMillingBuilder Builder
To create a new instance of this class, use OperationCollection.createChamferMillingBuilder(nxopen.cam.CAMObject) Created in NX9.0.2 |
interface |
ChipControl
|
interface |
CircularAboutAxisMoveBuilder
Represents the Circular Move To Point Builder
To create a new instance of this class, use MoveCollection.createCircularAboutAxisMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
CleanupOutput
|
interface |
CleanupSettings
|
interface |
CollisionConfigurationBuilder
Represents a
CollisionConfigurationBuilder
This is an abstract class, and cannot be instantiated. |
interface |
CollisionPairBuilder
Represents a
CollisionPairBuilder
To create a new instance of this class, use KinematicConfigurator.createCollisionPairBuilder() Created in NX6.0.0 NX_REMOVE_FROM_JAVA_API |
interface |
CollisionPairBuilderList
Represents a list of objects.
|
interface |
ContourAngle
|
interface |
ConvertFromMCDBuilder
Represents a
ConvertFromMCDBuilder To create a new instance of this class, use KinematicConfigurator.createConvertFromMcdBuilder() Created in NX9.0.0 |
interface |
CornerControlBuilder
Represents a FinishPasses Builder .
|
interface |
CustomLoops
Deprecated.
Deprecated in NX9.0.0. Use
PatchOpeningsBuilder instead.
|
interface |
CustomLoopSet
Deprecated.
Deprecated in NX9.0.0. Use
PatchOpeningsBuilder instead.
|
interface |
CustomLoopSetList
Represents a list of objects.
|
interface |
CutAngle
Represents a boundary cut angle ci Builder .
|
interface |
CutBand
Cut Band Builder .
|
interface |
Cutcom
|
interface |
CutDepthChecker
Represents a cut depth checker object
This has not creator . |
interface |
CutDwell
|
interface |
CutLevel
Represents a cut level object for cavity mill and zlevel mill.
|
interface |
CutLevelPlanar
Represents a cut level object for planar mill.
|
interface |
CutParameters
|
interface |
CutPatternBuilder
Represents a Cut Pattern Builder .
|
interface |
CutRegionsBuilder
Represents a Cut Regions Builder .
|
interface |
CutSides
Represents a Cut Sides Builder .
|
interface |
CutStrategy
Represents cut strategy .
|
interface |
CutVolume
The classs represent the sub builder for creating cut volume feature items
To create a new instance of this class, use CutVolumeGeom.createCutVolume() Created in NX8.0.0 |
interface |
CutVolumeGeom
The classs represent the builder for creating cut volume features .
|
interface |
CutVolumeList
Represents a list of objects.
|
interface |
Cycle
Represets a User Defined Event .
|
interface |
CylinderMilling
Represents a Cylinder Milling Operation
To create or edit an instance of this class, use CylinderMillingBuilder Created in NX9.0.1 |
interface |
CylinderMillingBuilder
Represents a CylinderMillingBuilder Builder
To create a new instance of this class, use OperationCollection.createCylinderMillingBuilder(nxopen.cam.CAMObject) Created in NX8.0.0 |
interface |
CylinderMillingCutParameters
Represents a CylinderMillingCutParameters Builder .
|
interface |
CylindricalMillingBuilder
Represents a CylindricalMilling Builder
This is an abstract class and cannot be instantiated. |
interface |
CylindricalMillingCutParameters
Represents a CylindricalMillingCutParameters Builder
This is an abstract class and cannot be instantiated. |
interface |
DeltaMoveBuilder
Represents the Delta Move Builder
To create a new instance of this class, use MoveCollection.createDeltaMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
DisplayPaint
Represents a display paint Builder
This is an abstract class and cannot be instantiated. |
interface |
DisplayPath
Represents a display path Builder
This is an abstract class and cannot be instantiated. |
interface |
DisplaySilhouette
Represents a display silhouette Builder
This is an abstract class and cannot be instantiated. |
interface |
DisplayTool
Represents a display tool Builder
This is an abstract class and cannot be instantiated. |
interface |
DmAmBuilder
Represents a Area Milling Drive Method Builder .
|
interface |
DmBndBuilder
Represents a Boundary Drive Method Builder .
|
interface |
DmCmBuilder
Represents a DmCmBuilder .
|
interface |
DmCmMultiplePassesCiBuilder
Represents a DmCmMultiplePassesCiBuilder
To obtain an instance of this class use CAM.DmCmBuilder#dmCmMultiplePassesBuilder Created in NX5.0.0 |
interface |
DmCurveBuilder
Represents a Curve Drive Method Builder .
|
interface |
DmRadBuilder
Represents a DmRadBuilder Builder .
|
interface |
DmRotaryFloorFinishBuilder
represent rotary floor finish builder .
|
interface |
DmSpiralBuilder
Represents a Spiral Drive Method Builder
This is an abstract class and cannot be instantiated. |
interface |
DmSurfBuilder
Represents a DmSurfBuilder .
|
interface |
DmTpBuilder
Represents a tool path Drive Method Builder
This is an abstract class and cannot be instantiated. |
interface |
DmUserExitCiBuilder
Represents a exit name ci Builder .
|
interface |
DPMItpBuilder
Represents an DPMItp Builder
To create a new instance of this class, use OperationCollection.createDpmitpBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
DrillSurfaceBuilder
Represents a Drill Surface Builder
This is an abstract class and cannot be instantiated. |
interface |
DriveChainItemBuilder
Represents the Drive Chain Item Builder
This cannot be instantiated . |
interface |
DriveChainItemBuilderList
Represents a list of objects.
|
interface |
DriveMode
Drive Mode Builder .
|
interface |
EdgeFinish
Represents a Blade Finish Drive Method Builder .
|
interface |
EditSubopCommand
Represents an Edit Subop Command Builder .
|
interface |
Engraving
Represents a Engraving Operation
To create or edit an instance of this class, use EngravingBuilder Created in NX7.5.0 |
interface |
EngravingBuilder
Represents a Engraving Builder
To create a new instance of this class, use OperationCollection.createEngravingBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
ExtendAtEdges
|
interface |
FaceMilling
Represents a Face Milling Operation
To create or edit an instance of this class, use FaceMillingBuilder Created in NX7.5.0 |
interface |
FaceMillingBuilder
Represents a FaceMilling Builder
To create a new instance of this class, use OperationCollection.createFaceMillingBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
FacesSequence
Represents faces sequence .
|
interface |
FeatureMilling
Represents a Feature Milling Operation
To create or edit an instance of this class, use FeatureMillingBuilder Created in NX7.5.0 |
interface |
FeatureMillingBuilder
Represents a FeatureMilling Builder
To create a new instance of this class, use OperationCollection.createFeatureMillingBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
FeatureMillingCutParameters
Represents a FeatureMillingCutParameters Builder .
|
interface |
FeatureProcessBuilder
The Create Feature Process Builder class creates operations and features groups
To create a new instance of this class, use CAMSetup.createFeatureProcessBuilder() Default values. |
interface |
FeatureRecognitionBuilder
Represents a FeatureRecognition Builder
To create a new instance of this class, use CAMSetup.createFeatureRecognitionBuilder(nxopen.cam.CAMObject) Created in NX6.0.0 |
interface |
FeatureTeaching
Represents a FeatureTeaching Builder
To create a new instance of this class, use CAMSetup.createFeatureTeaching(nxopen.cam.CAMObject) Created in NX8.0.0 |
interface |
FeedsBuilder
Represents a feeds Builder .
|
interface |
FeedsOptimizationData
|
interface |
FeedsOptimizeBuilder
Represents a
FeedsOptimizeBuilder
a "commit" of this object will perform the Feed Rate Optimization. |
interface |
FeedsTurnBuilder
Represents a turning feeds Builder .
|
interface |
FeedsWedmBuilder
Represents a wedm feeds Builder .
|
interface |
FinishDwell
|
interface |
FinishPassesBuilder
Represents a FinishPasses Builder
This is an abstract class, and cannot be instantiated. |
interface |
FinishTurning
Represents a Turn Finishing operation
To create or edit an instance of this class, use FinishTurningBuilder Created in NX7.5.0 |
interface |
FinishTurningBuilder
Represents a FinishTurning Builder
To create a new instance of this class, use OperationCollection.createFinishTurningBuilder(nxopen.cam.CAMObject) Created in NX6.0.0 |
interface |
FirstPlunge
Represents the first plunge .
|
interface |
FlowBuilder
Represents a FlowBuilder Builder
This is an abstract class and cannot be instantiated. |
interface |
FlowCutSteepContainment
Represents a Steep Containment Builder .
|
interface |
FollowCurveMoveBuilder
Represents the Follow Curve Move Builder
To create a new instance of this class, use MoveCollection.createFollowCurveMoveBuilder(nxopen.cam.Move) Default values. |
interface |
FollowGeometryMoveBuilder
Represents the Follow Geometry Move Builder
This is an abstract class, and cannot be created. |
interface |
FollowPartMoveBuilder
Represents the Follow Part Move Builder
To create a new instance of this class, use MoveCollection.createFollowPartMoveBuilder(nxopen.cam.Move) Default values. |
interface |
FormEdgesBuilder
Represents a FormEdges Builder .
|
interface |
GeneralPropertiesBuilder
Represents a
GeneralPropertiesBuilder to be used for setting the name
of a specified CAM object. |
interface |
GenericMotionControl
Represents a Generic Motion Control operation
To create or edit an instance of this class, use GmcOpBuilder Created in NX7.5.0 |
interface |
GenericTrackingBuilder
Represents a GenericTracking Builder
To create a new instance of this class, use Tool.createGenericTrackingBuilder(nxopen.cam.SolidTrackPoint) Created in NX5.0.0 |
interface |
Geometry
Represents a CAM geometry object .
|
interface |
GeometryCiBuilder
Represents a geometry ci Builder .
|
interface |
GeometrySet
Represents a geometry set for a CAM object.
|
interface |
GeometrySetList
Represents a list of objects.
|
interface |
GmcOpBuilder
Represents a GmcOp Builder
To create a new instance of this class, use OperationCollection.createGmcopBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
GrooveMilling
Represents a Groove Milling Operation
To create or edit an instance of this class, use GrooveMillingBuilder Created in NX9.0.0 |
interface |
GrooveMillingBuilder
Represents a GrooveMillingBuilder
To create a new instance of this class, use OperationCollection.createGrooveMillingBuilder(nxopen.cam.CAMObject) Created in NX9.0.0 |
interface |
GroupFeatures
Represents the group features command
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createGroupFeatures Default values. |
interface |
HolderSectionBuilder
Represents a Holder Section Builder .
|
interface |
HoldingSystemBuilder
Represents a
HoldingSystemBuilder
This is an abstract class, and cannot be instantiated. |
interface |
HoldingSystemBuilderList
Represents a list of objects.
|
interface |
HoleBossGeom
Represents a CAM geometry builder
This is an abstract class and cannot be instantiated. |
interface |
HoleBossSet
Represents a Cut Area Geometry builder
To create a new instance of this class, use HoleBossGeom.createHoleBossBuilder(nxopen.NXObject[], double, double, nxopen.NXObject, int) Created in NX7.5.0 |
interface |
HoleBossSetList
Represents a list of objects.
|
interface |
HoleDrilling
Represents a Hole Drilling Operation
To create or edit an instance of this class, use HoleDrillingBuilder Created in NX9.0.1 |
interface |
HoleDrillingBuilder
Represents a HoleDrillingBuilder Builder
To create a new instance of this class, use OperationCollection.createHoleDrillingBuilder(nxopen.cam.CAMObject) Created in NX9.0.0 |
interface |
HoleDrillingCutParameters
Represents a HoleDrillingCutParameters Builder .
|
interface |
HoleMachiningBuilder
Represents a HoleMachiningBuilder Builder
This is an abstract class and cannot be instantiated. |
interface |
HoleMachiningCutParameters
Represents a HoleMachiningCutParameters Builder
This is an abstract class and cannot be instantiated. |
interface |
HoleMaking
Represents a Hole Making operation
To create or edit an instance of this class, use HoleMakingBuilder Created in NX7.5.0 |
interface |
HoleMakingBuilder
Represents a HoleMaking Builder
To create a new instance of this class, use OperationCollection.createHoleMakingBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
HubFinish
Represents a Hub Finish Drive Method Builder .
|
interface |
InferredDouble
Represents a builder for an inferred value in of a CAM.CAMObject
Created in NX7.5.0 |
interface |
InitialProfilePlunge
Represents the initial profile plunge .
|
interface |
InPathEventDataBuilder
Represents a InPath Event Data Builder
To create a new instance of this class, use WedmCustomBoundaryDataBuilder.createInpathEventDataBuilder() Created in NX5.0.0 |
interface |
InPathEventDataBuilderList
Represents a list of objects.
|
interface |
InPathEventSetData
Represents in path event
This is a sub-builder class and cannot be directly instantiated . |
interface |
InspectionAlignmentBuilder
Represents a CMM Inspection Alignment builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionAlignmentBuilder(nxopen.cam.CAMObject) Created in NX7.5.2 |
interface |
InspectionAnalyzeBuilder
Inspection Analyze options dialog builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionAnalyzeBuilder(nxopen.cam.CAMObject) Created in NX8.5.0 |
interface |
InspectionAnalyzeOutputBuilder
Inspection Analyze Output options dialog builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionAnalyzeOutputBuilder(nxopen.cam.CAMObject) Created in NX8.5.1 |
interface |
InspectionCmmCommandBuilder
Represents a CMM Inspection miscellaneous command builder.
|
interface |
InspectionCollisionAvoidanceBuilder
Collision Avoidance Dialog builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionCollisionAvoidanceBuilder(nxopen.cam.CAMObject) Created in NX8.0.0 |
interface |
InspectionCreatePathsBuilder
Create Paths Dialog builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionCreatePathsBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
interface |
InspectionDeleteMeaPtsBuilder
Inspection Delete Analyze Points dialog builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionDeleteMeaPtsBuilderSel(nxopen.cam.CAMObject[]) Created in NX9.0.1 |
interface |
InspectionDeltaMoveBuilder
Represents the builder for the CMM Inspection sub-operation Delta Move.
|
interface |
InspectionLinear5axisMoveToPointBuilder
Represents the builder for the CMM Inspection sub-operation Linear 5axis Move To Point.
|
interface |
InspectionLinearMoveToPointBuilder
Represents the builder for the CMM Inspection sub-operation Linear Move To Point.
|
interface |
InspectionLinkPmiBuilder
Create Link PMI Dialog Builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionLinkPmiBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
interface |
InspectionMeasDataBuilder
Inspection Measured Data dialog builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionMeasDataBuilder(nxopen.cam.CAMObject) Created in NX8.5.0 |
interface |
InspectionMeasurePointBuilder
Represents the builder for the CMM Inspection sub-operation Measure Point.
|
interface |
InspectionMoveBuilder
Represents CMM Inspection Move Builder
This cannot be instantiated . |
interface |
InspectionMoveSubop
Represents CMM Inspection Move
To obtain an instance of this class use InspectionMoveCollection Created in NX7.0.0 |
interface |
InspectionOperation
Represents an Inspection operation
To obtain an instance of this class use InspectionOperationCollection Created in NX7.0.0 |
interface |
InspectionOperationTransformBuilder
Create transformed inspection operations,
this builder's Commit can produce more than one object,
the GetCommittedObjects can be used to get the objects
and the order of GetCommittedObject's output array is not stable.
|
interface |
InspectionOutputOperationBuilder
this class creates the output operation
To create a new instance of this class, use InspectionOperationCollection.createInspectionOutputOperationBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
interface |
InspectionPathBuilder
Represents the builder for a CMM Inspection path.
|
interface |
InspectionPathPointBuilder
Represents an inspection path point builder .
|
interface |
InspectionProbeTrackingBuilder
Represents a InspectionProbeTracking builder
To create a new instance of this class, use InspectionTool.createInspectionProbeTrackingBuilder(nxopen.cam.ProbeTrackPoint) Created in NX9.0.0 |
interface |
InspectionSaveToLayerBuilder
Inspection Analyze Save to Layer dialog builder
To create a new instance of this class, use InspectionOperationCollection.createInspectionSaveToLayerBuilderSel(nxopen.cam.CAMObject[]) Created in NX9.0.1 |
interface |
InspectionScanArcBuilder
Represents the builder for the CMM Inspection sub-operation Scan Arc.
|
interface |
InspectionScanCurve5AxisBuilder
Represents the builder for the CMM Inspection sub-operation Scan Curve.
|
interface |
InspectionScanCurveBuilder
Represents the builder for the CMM Inspection sub-operation Scan Curve.
|
interface |
InspectionScanHelixBuilder
Represents the builder for the CMM Inspection sub-operation Scan Helix.
|
interface |
InspectionScanLineBuilder
Represents the builder for the CMM Inspection sub-operation Scan Line.
|
interface |
InspectionSensorBuilder
Represents the builder for a CMM Inspection Sensor.
|
interface |
InspectionSensorMassEditBuilder
Edit Multiple Subops Dialog builder
To create a new instance of this class, use InspectionMoveCollection.createInspectionSensorMassEditBuilder(nxopen.cam.InspectionMoveSubop) Created in NX7.5.3 |
interface |
InspectionSetup
|
interface |
InspectionToleranceOperationBuilder
this class creates the tolerance operation
To create a new instance of this class, use InspectionOperationCollection.createInspectionToleranceOperationBuilder(nxopen.cam.CAMObject) Created in NX7.0.0 |
interface |
InspectionUVGridBuilder
Represents the builder for the CMM Inspection UV Grid sub-operation.
|
interface |
InterpolateAngle
Represents builder of Interpolate Angle, one option of Tool Axis .
|
interface |
InterpolateVector
Represents builder of Interpolate Vector, one option of Tool Axis .
|
interface |
IpwAnalysisBuilder
Represents a
IpwAnalysisBuilder
This is an abstract class, and cannot be instantiated. |
interface |
IpwContainmentCurvesBuilder
Represents a
IpwContainmentCurvesBuilder
This is an abstract class, and cannot be instantiated. |
interface |
LaserCircleCutout
Represents a LaserCircleCutout
To create a new instance of this class, use MoveCollection.createLaserCircleCutout(nxopen.cam.Move) Created in NX9.0.0 |
interface |
LaserControlPoint
Represents a Laser Control Point builder
To create a new instance of this class, use LaserProfileMove.createControlPoint(int, nxopen.Point, nxopen.CartesianCoordinateSystem, int, boolean, nxopen.NXObject, int) Created in NX9.0.0 |
interface |
LaserControlPointList
Represents a list of objects.
|
interface |
LaserCutoutDefinition
Represents cutout definition settings for laser move .
|
interface |
LaserHeadOrientation
Represents head orientation settings for laser sub move .
|
interface |
LaserHexagonCutout
Represents a LaserHexagonCutout
To create a new instance of this class, use MoveCollection.createLaserHexagonCutout(nxopen.cam.Move) Created in NX9.0.0 |
interface |
LaserLinearMove
Represents a LaserLinearMove
To create a new instance of this class, use MoveCollection.createLaserLinearMove(nxopen.cam.Move) Created in NX9.0.0 |
interface |
LaserPiercingPoint
Represents piercing point settings for laser move .
|
interface |
LaserProfileMove
Represents a LaserProfileMove
To create a new instance of this class, use MoveCollection.createLaserProfileMove(nxopen.cam.Move) Created in NX9.0.0 |
interface |
LaserRectangleCutout
Represents a LaserRectangleCutout
To create a new instance of this class, use MoveCollection.createLaserRectangleCutout(nxopen.cam.Move) Created in NX9.0.0 |
interface |
LaserSlotCutout
Represents a LaserSlotCutout
To create a new instance of this class, use MoveCollection.createLaserSlotCutout(nxopen.cam.Move) Created in NX9.0.0 |
interface |
LaserTeachMode
Represents a Laser TeachMode
To create a new instance of this class, use OperationCollection.createLaserTeachMode(nxopen.cam.CAMObject) Created in NX9.0.0 |
interface |
LatheMachineControl
Represents a Lathe Machine Control operation
To create or edit an instance of this class, use LatheMachineControlBuilder Created in NX7.5.0 |
interface |
LatheMachineControlBuilder
Represents a LatheMachineControl Builder
To create a new instance of this class, use OperationCollection.createLatheMachineControlBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
LatheUserDefined
Represents a Lathe User Defined operation
To create or edit an instance of this class, use LatheUserDefinedBuilder Created in NX7.5.0 |
interface |
LatheUserDefinedBuilder
Represents a LatheUserDefined Builder
To create a new instance of this class, use OperationCollection.createLatheUserDefinedBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
LayoutCiBuilder
Represents a layout ci Builder .
|
interface |
LeadAngles
Represents a lead angles .
|
interface |
LevelToLevel
|
interface |
LowerLimit
|
interface |
MachiningFeatureGeom
This class represent the builder for machining feature geometry
.
|
interface |
ManageToolPartBuilder
Represents an Export Tool Part Builder
This is an abstract class, and cannot be instantiated. |
interface |
ManualFeatureBuilderList
Represents a list of objects.
|
interface |
ManualMove
Represents Manual Move
To obtain an instance of this class us OperationCollection Created in NX4.0.0 |
interface |
MaxCutTraverse
|
interface |
MergeSubopCommand
Represents an Merge Subop Command Builder .
|
interface |
MillCutParameters
|
interface |
MillingTrackpointBuilder
Represents a Milling Trackpoint Builder .
|
interface |
MillMachineControl
Represents a Mill Machine Control operation
To create or edit an instance of this class, use MillMachineControlBuilder Created in NX7.5.0 |
interface |
MillMachineControlBuilder
Represents a MillMachineControl Builder
To create a new instance of this class, use OperationCollection.createMillMachineControlBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
MillOperation
Represents a Mill operation
To create or edit an instance of this class, use MillOperationBuilder Created in NX7.5.0 |
interface |
MillOperationBuilder
Represents a MillOperation Builder
This is an abstract class and cannot be instantiated. |
interface |
MillToolProbing
Represents a Mill Tool operation
To create or edit an instance of this class, use MillToolProbingBuilder Created in NX8.5.1 |
interface |
MillToolProbingBuilder
Represents a Mill Tool Probing Builder
To create a new instance of this class, use OperationCollection.createMillToolProbingBuilder(nxopen.cam.CAMObject) Created in NX8.5.1 |
interface |
MillUserDefined
Represents a Mill User Defined operation
To create or edit an instance of this class, use MillUserDefinedBuilder Created in NX7.5.0 |
interface |
MillUserDefinedBuilder
Represents a MillUserDefined Builder
To create a new instance of this class, use OperationCollection.createMillUserDefinedBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
MinCutDepth
|
interface |
MinCutLength
Represents a
MinCutLength |
interface |
MinCutVolume
|
interface |
Move
|
interface |
MoveBuilder
Represents Move Builder
This cannot be instantiated . |
interface |
MoveToPointBuilder
Represents the Move To Point Builder
To create a new instance of this class, use MoveCollection.createMoveToPointBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
MultiBladeBaseGeometry
Represents a selectoin geometry Builder
This is an abstract class and cannot be instantiated. |
interface |
MultiBladeSplittersGeometry
Represents a selectoin list geometry Builder
This is an abstract class and cannot be instantiated. |
interface |
MultiDepthCut
|
interface |
MultiplePassesBuilder
Represents a MultiplePassesBuilder .
|
interface |
MultipleStepoverBuilder
Represents a Builder which holds the data for a set of individual number of passes and
stepover distance.
|
interface |
MultiRamp
|
interface |
NCAssistantBuilder
Represents a NCAssistant Builder
To create a new instance of this class, use CAMSetup.createNCAssistantBuilder() Default values. |
interface |
NcmAvoidancePointBuilder
|
interface |
NcmClearanceBuilder
|
interface |
NcmctPartMountingBuilder
Represents a
NcmctPartMountingBuilder
a "commit" of this object will perform the Part Mounting and no object is returned. |
interface |
NcmHoleDrilling
|
interface |
NcmHoleMachining
|
interface |
NcmHoleMachiningEngRet
Represents a builder for an inheritable double value in of a CAM.CAMObject
Created in NX7.5.0 |
interface |
NcmLaserEngage
Represents Engage settings for laser non cutting moves .
|
interface |
NcmLaserRetract
Represents Retract settings for laser non cutting moves .
|
interface |
NcmPlanarBuilder
|
interface |
NcmPlanarEngRetBuilder
Represents a builder for an inheritable double value in of a CAM.CAMObject
Created in NX5.0.0 |
interface |
NcmScBuilder
|
interface |
NcmScEngRetBuilder
Represents a builder for an inheritable double value in of a CAM.CAMObject
Created in NX5.0.0 |
interface |
NcmSmoothingBuilder
|
interface |
NcmSubopBuilder
|
interface |
NcmTransfer
|
interface |
NcmTransferBuilder
|
interface |
NcmTurningBuilder
Represents a CAM.NcmTurningBuilder
Created in NX6.0.0 |
interface |
NcmTurnRoughBuilder
Represents a CAM.NcmTurnRoughBuilder
Created in NX6.0.0 |
interface |
NcmTurnRoughFinishBuilder
Represents a CAM.NcmTurnRoughFinishBuilder
Created in NX6.0.0 |
interface |
NcmTurnThreadBuilder
Represents a CAM.NcmTurnThreadBuilder
Created in NX6.0.0 |
interface |
NcmWedmBuilder
Represents a CAM.NcmWedmBuilder
Created in NX7.5.0 |
interface |
NormalToToolAxisMoveBuilder
Represents the Move To Point Builder
To create a new instance of this class, use MoveCollection.createNormalToToolAxisMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
Notes
Represents notes .
|
interface |
ObjectContainer
Represents a Cam Objects Builder .
|
interface |
ObjectNotes
Represents an Object Notes
To create a new instance of this class, use CAMSetup.createObjectNotes(nxopen.cam.CAMObject) Created in NX9.0.0 |
interface |
ObjectsFeedsBuilder
Represents an Object Action Feeds Builder
To create a new instance of this class, use CAMSetup.createFeedsBuilder(nxopen.cam.CAMObject[]) Created in NX6.0.0 |
interface |
ObjectsUdeSet
Represents an Object Action Ude Set Builder
To create a new instance of this class, use CAMSetup.createObjectsUdeSet(nxopen.cam.CAMObject[], nxopen.cam.CAMSetup.Ude) Created in NX6.0.0 |
interface |
OffsetDataBuilder
Represents the Offset Point Data Builder .
|
interface |
Operation
Represents an operation
To create or edit an instance of this class, use OperationBuilder Created in NX4.0.0 |
interface |
OperationBuilder
Represents a Opr Builder
This is an abstract class, and cannot be instantiated. |
interface |
OperationDisplayOptionsBuilder
Represents a display options Builder
This is an abstract class and cannot be instantiated. |
interface |
OperationTeaching
Represents a OperationTeaching Builder
To create a new instance of this class, use CAMSetup.createOperationTeaching(nxopen.cam.CAMObject) Created in NX8.0.0 |
interface |
OperationTransformBuilder
OperationTransformBuilder
To create a new instance of this class, use CAMSetup.createOperationTransformBuilder(nxopen.cam.CAMObject[]) Created in NX6.0.0 |
interface |
OutputUncutRegions
|
interface |
ParamBuilder
Represents a manufacturing object builder.
|
interface |
PartAxisBuilder
Represents a part axis builder.
|
interface |
PathDisplayColors
Represents a path display colors Builder
This is an abstract class and cannot be instantiated. |
interface |
PitchSetting
|
interface |
PlanarMilling
Represents a Planar Milling Operation
To create or edit an instance of this class, use PlanarMillingBuilder Created in NX7.5.0 |
interface |
PlanarMillingBuilder
Represents a PlanarMilling Builder
To create a new instance of this class, use OperationCollection.createPlanarMillingBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
PlanarOperation
Represents a Planar operation
To create or edit an instance of this class, use PlanarOperationBuilder Created in NX7.5.0 |
interface |
PlanarOperationBuilder
Represents a PlanarOperation Builder
This is an abstract class and cannot be instantiated. |
interface |
PlungeMilling
Represents a Plunge Milling Operation
To create or edit an instance of this class, use PlungeMillingBuilder Created in NX7.5.0 |
interface |
PlungeMillingBuilder
Represents a PlungeMilling Builder
To create a new instance of this class, use OperationCollection.createPlungeMillingBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
PmopToolAxisCiBuilder
Represents a PmopToolAxisCiBuilder
This is an abstract class, and cannot be instantiated. |
interface |
PointToPointBuilder
Represents a Point to Point Builder (Drilling)
To create a new instance of this class, use OperationCollection.createPointToPointBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
PostEventsCiBuilder
Represents a PostEventsCiBuilder .
|
interface |
Preferences
Represents a cam preferences Builder
To create a new instance of this class, use CAMSession.createCamPreferences() Created in NX7.5.0 |
interface |
PreprocessGeometryBuilder
Represents a Preprocess Geometry Builder
To create a new instance of this class, use CAMSetup.createPreprocessGeometryBuilder() Created in NX6.0.0 |
interface |
ProbeCalibrateLengthMoveBuilder
Represents the Probe Calibrate Length Move Builder
To create a new instance of this class, use MoveCollection.createProbeCalibrateLengthMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
ProbeCalibrateSphereMoveBuilder
Represents the Probe Calibrate Sphere Move Builder
To create a new instance of this class, use MoveCollection.createProbeCalibrateSphereMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
ProbeCalibrateStylusMoveBuilder
Represents the Probe Calibrate Stylus Move Builder
To create a new instance of this class, use MoveCollection.createProbeCalibrateStylusMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
ProbeClearanceMoveBuilder
Represents the Probe Clearance Move Builder
To create a new instance of this class, use MoveCollection.createProbeClearanceMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
ProbeControlParametersBuilder
|
interface |
ProbeInspectBorebossMoveBuilder
Represents the Probe Inspect Bore Boss Move Builder
To create a new instance of this class, use MoveCollection.createProbeInspectBorebossMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
ProbeInspectPointMoveBuilder
Represents the Probe Inspect Point Move Builder
To create a new instance of this class, use MoveCollection.createProbeInspectPointMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
ProbeInspectSurfacePointMoveBuilder
Represents the Probe Inspect Surface Point Move Builder
To create a new instance of this class, use MoveCollection.createProbeInspectSurfacePointMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
ProbeParamsBuilder
Represents the Probe Params Builder
This builder cannot be instantiated separately. |
interface |
ProbeProtectedParametersBuilder
Represents the Probe Protected Parameters Builder .
|
interface |
ProbeStockParametersBuilder
Represents the Probe Stock Parameters Builder .
|
interface |
ProbeToleranceParametersBuilder
|
interface |
ProbeTrackingBuilder
Represents a ProbeTracking Builder
To create a new instance of this class, use Tool.createProbeTrackingBuilder(nxopen.cam.ProbeTrackPoint) Created in NX5.0.0 |
interface |
ProbeTrackPoint
Represents an Track Point
To obtain an instance of this class us TrackPointCollection Created in NX4.0.0 |
interface |
ProfileStrategy
Represents profile strategy .
|
interface |
ProjVecCiBuilder
Represents a tool axis ci Builder .
|
interface |
RampingMode
Represents a ramping mode Builder .
|
interface |
ReliefCut
Represents the relief cut .
|
interface |
ReliefPlunge
|
interface |
RotaryPointMoveBuilder
represents the Rotary Move To Point Builder
To create a new instance of this class, use MoveCollection.createRotaryPointMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
RotaryPolarMoveBuilder
Represents the Rotary Polar Builder
To create a new instance of this class, use MoveCollection.createRotaryPolarMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
RotateToolMoveBuilder
Represents the Rotate Tool Move Builder
To create a new instance of this class, use MoveCollection.createRotateToolMoveBuilder(nxopen.cam.Move, nxopen.cam.Move) Created in NX5.0.0 |
interface |
RoughFinishTurning
Represents a Turn Rough Finish operation
To create or edit an instance of this class, use RoughFinishTurningBuilder Created in NX7.5.0 |
interface |
RoughFinishTurningBuilder
Represents a RoughFinishTurning Builder
This is an abstract class and cannot be instantiated. |
interface |
RoughTurning
Represents a Turn Rough operation
To create or edit an instance of this class, use RoughTurningBuilder Created in NX7.5.0 |
interface |
RoughTurningBuilder
Represents a RoughTurning Builder
To create a new instance of this class, use OperationCollection.createRoughTurningBuilder(nxopen.cam.CAMObject) Created in NX6.0.0 |
interface |
RoundPointBuilder
Represents the round Point Builder .
|
interface |
SelectCAMFeatureList
Represents a list of objects on a selection list.
|
interface |
Sequence
Represents Sequence Builder .
|
interface |
SimulationOptionsBuilder
Represents a
SimulationOptionsBuilder
To create a new instance of this class, use KinematicConfigurator.createSimulationOptionsBuilder(nxopen.cam.SimulationOptionsBuilder.DialogType) Created in NX6.0.0 NX_REMOVE_FROM_JAVA_API |
interface |
SmallAreaAvoidance
Represents a SmallArea Builder .
|
interface |
SolidTrackingBuilder
Represents a SolidTracking Builder
To create a new instance of this class, use Tool.createSolidTrackingBuilder(nxopen.cam.SolidTrackPoint) Created in NX5.0.0 |
interface |
SolidTrackPoint
Represents an Track Point
To obtain an instance of this class us TrackPointCollection Created in NX4.0.0 |
interface |
SplitSubopCommand
Represents an Split Subop Command Builder .
|
interface |
Splitter
Represents a Splitter Builder
To create a new instance of this class, use MultiBladeSplittersGeometry.createSplitter(nxopen.NXObject[], nxopen.NXObject[]) Created in NX7.0.0 |
interface |
SplitterList
Represents a list of objects.
|
interface |
SpringPasses
Represents a spring passes .
|
interface |
SpunOutlineGeom
Represents a spun outline geometry object for turning boundary .
|
interface |
SteepContainment
|
interface |
StepoverBuilder
Represents a Stepover Builder .
|
interface |
StepParamsBuilder
Represents a StepParams Builder .
|
interface |
StepUpBuilder
Represents a StepUp Builder .
|
interface |
StockPerPassBuilder
Represents a Builder which holds the data for a set of individual stock per pass.
|
interface |
StopPosition
Represents a stop position .
|
interface |
SurfaceContour
Represents a Surface Contour operation
To create or edit an instance of this class, use SurfaceContourBuilder Created in NX7.5.0 |
interface |
SurfaceContourBuilder
Represents a SurfaceContour Builder
To create a new instance of this class, use OperationCollection.createSurfaceContourBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
SurfaceDriveGeometry
Represents a CAM drive geometry object for surface area .
|
interface |
SurfaceDriveGeometrySet
Represents a geometry set for a CAM object.
|
interface |
SurfaceDriveGeometrySetList
Represents a list of objects.
|
interface |
TabPointDataBuilder
Represents a Tab Point Builder
To create a new instance of this class, use WedmCustomBoundaryDataBuilder.createTabPointDataBuilder() Created in NX5.0.0 |
interface |
TabPointDataBuilderList
Represents a list of objects.
|
interface |
TeachmodeEngageSettingsBuilder
Represents a TeachmodeEngageSettingsBuilder
To create a new instance of this class, use OperationCollection.createTeachmodeTurningBuilder(nxopen.cam.CAMObject) Created in NX7.5.0 |
interface |
TeachmodeLinearMoveBuilder
Represents a TeachmodeLinearMove
To create a new instance of this class, use OperationCollection.createTeachmodeTurningBuilder(nxopen.cam.CAMObject) Created in NX7.5.0 |
interface |
TeachmodeProfileMoveBuilder
Represents a TeachmodeProfileMoveBuilder
To create a new instance of this class, use OperationCollection.createTeachmodeTurningBuilder(nxopen.cam.CAMObject) Created in NX7.5.0 |
interface |
TeachmodeRetractSettingsBuilder
Represents a TeachmodeRetractSettings builder
To create a new instance of this class, use OperationCollection.createTeachmodeTurningBuilder(nxopen.cam.CAMObject) Created in NX7.5.0 |
interface |
TeachmodeTurning
Represents a Turning Teachmode operation
To create or edit an instance of this class, use TeachmodeTurningBuilder Created in NX7.5.0 |
interface |
TeachmodeTurningBuilder
Represents a TeachmodeTurningBuilder
To create a new instance of this class, use OperationCollection.createTeachmodeTurningBuilder(nxopen.cam.CAMObject) Created in NX7.5.0 |
interface |
ThreadCutParameters
|
interface |
ThreadedBossSet
Represents a thread boss Geometry builder
To create a new instance of this class, use HoleBossGeom.createThreadedBossBuilder(nxopen.NXObject[], double, double, nxopen.NXObject, double, double, double, java.lang.String, double, int, nxopen.cam.HoleBossGeom.FormTypes, java.lang.String) Created in NX7.5.0 |
interface |
ThreadedBossSetList
Represents a list of objects.
|
interface |
ThreadedHoleSet
Represents a Cut Area Geometry builder
To create a new instance of this class, use HoleBossGeom.createThreadedHoleBuilder(nxopen.NXObject[], double, double, nxopen.NXObject, double, double, double, java.lang.String, java.lang.String, double, int, nxopen.cam.HoleBossGeom.FormTypes, java.lang.String, java.lang.String, int) Created in NX7.5.0 |
interface |
ThreadedHoleSetList
Represents a list of objects.
|
interface |
ThreadMilling
Represents a Thread Milling Operation
To create or edit an instance of this class, use ThreadMillingBuilder Created in NX7.5.0 |
interface |
ThreadMillingBuilder
Represents a ThreadMilling Builder
To create a new instance of this class, use OperationCollection.createThreadMillingBuilder(nxopen.cam.CAMObject) Created in NX7.5.0 |
interface |
ThreadMillingCutParameters
Represents a ThreadMillingCutParameters Builder .
|
interface |
ThreadTurning
Represents a Thread Turning operation
To create or edit an instance of this class, use ThreadTurningBuilder Created in NX7.5.0 |
interface |
ThreadTurningBuilder
Represents a ThreadTurning Builder
To create a new instance of this class, use OperationCollection.createThreadTurningBuilder(nxopen.cam.CAMObject) Created in NX6.0.0 |
interface |
ToolAxisAdvanced
Represents a Tool Axis Advanced Builder .
|
interface |
ToolAxisBase
Represents a tool axis ci Builder .
|
interface |
ToolAxisChange
|
interface |
ToolAxisCiBuilder
Represents a tool axis ci Builder .
|
interface |
ToolAxisFixed
Represents a Tool Axis Fixed Builder .
|
interface |
ToolAxisInterpolate
Represents a Tool Axis Interpolate Builder .
|
interface |
ToolAxisTilt
Represents a builder for an inheritable double value in of a CAM.CAMObject
Created in NX6.0.0 |
interface |
ToolAxisVariable
Represents a Tool Axis Variable Builder .
|
interface |
ToolChangeCiBuilder
Represents a ToolChangeCiBuilder .
|
interface |
ToolPathDivideBuilder
Represents a Tool Path Divide Builder
To create a new instance of this class, use CAMSetup.createToolPathDivideBuilder(nxopen.cam.CAMObject[]) Created in NX5.0.0 |
interface |
ToolPathEditorBuilder
Represents a Tool Path Editor Builder
To create a new instance of this class, use Operation.createToolPathEditorBuilder() Default values. |
interface |
ToolPathSplitBuilder
Represents a Tool Path Split Builder
To create a new instance of this class, use CAMSetup.createToolPathSplitBuilder(nxopen.cam.CAMObject[]) Created in NX6.0.0 |
interface |
ToolPathSplitItemBuilder
Represents a ToolPathSplitItem builder
Use the ToolPathSplitBuilder class to create a ToolPathSplitItemBuilder object. |
interface |
ToolPathSplitItemBuilderList
Represents a list of objects.
|
interface |
ToolPathSplitParametersBuilder
Represents the Divide Parameters
This object is owned by another builder. |
interface |
ToolPathTiltAvoidance
Represents a Tool Path Tilt Avoidance Builder
This is a sub-builder class and cannot be directly instantiated . |
interface |
ToolPathTiltBuilder
Represents a Tool Path Tilt Builder
To create a new instance of this class, use CAMSetup.createToolPathTiltBuilder(nxopen.cam.CAMObject[]) Created in NX7.5.2 |
interface |
ToolPathTiltClearance
Represents a Tool Path Tilt Clearance Builder
This is a sub-builder class and cannot be directly instantiated . |
interface |
ToolPathTiltMachine
Represents a Tool Path Tilt Machine Builder
This is a sub-builder class and cannot be directly instantiated . |
interface |
ToolPathTiltTilting
Represents a Tool Path Tilt Tilting Builder
This is a sub-builder class and cannot be directly instantiated . |
interface |
ToolPositioningBuilder
Represents the Tool Positioning Builder .
|
interface |
ToolTrackingPointBuilder
Represents the Tool Tracking Point Builder
To create a new instance of this class, use MoveCollection.createToolTrackingPointBuilder(nxopen.cam.Move) Created in NX8.5.1 |
interface |
Topology
Represents a CAM topology builder
Use the Geometry class to get a topology builder Created in NX8.0.0 |
interface |
TrackingBuilder
Represents a Tracking Builder .
|
interface |
TrackPoint
Represents an Track Point
To obtain an instance of this class us TrackPointCollection Created in NX4.0.0 |
interface |
TrackpointBuilder
Represents a Trackpoint Builder
This is an abstract class and can not be instantiated . |
interface |
TrimPlane
Represents Trim Plane .
|
interface |
TrimPoint
Represents trim point .
|
interface |
TrochoidalSettings
|
interface |
TurnAvoidanceApproachBuilder
Represents an avoidance start of engage Builder .
|
interface |
TurnAvoidanceClearanceBuilder
Represents an avoidance start of engage Builder .
|
interface |
TurnAvoidanceDepartureBuilder
Represents an avoidance start of engage Builder .
|
interface |
TurnAvoidanceFromBuilder
Represents an avoidance from Builder .
|
interface |
TurnAvoidanceGohomeBuilder
Represents an avoidance return Builder .
|
interface |
TurnAvoidancePathPointsBuilder
Represents a turn avoidance path points builder .
|
interface |
TurnAvoidanceReturnBuilder
Represents an avoidance return Builder .
|
interface |
TurnAvoidanceStartBuilder
Represents an avoidance start Builder .
|
interface |
TurnAvoidanceStartOfEngageBuilder
Represents an avoidance start of engage Builder .
|
interface |
TurnConcaveCornerControl
Represents a concave corner ja .
|
interface |
TurnCornerControl
Represents a first plunge ja .
|
interface |
TurnCutParameters
|
interface |
TurnCutterClearance
|
interface |
TurnEngageRetractBuilder
Represents a first plunge Builder .
|
interface |
TurnGrooveCornerControl
Represents a groove corner control ja .
|
interface |
TurningOperation
Represents a Turning operation
To create or edit an instance of this class, use TurningOperationBuilder Created in NX7.5.0 |
interface |
TurningOperationBuilder
Represents a Turning Operation Builder
This is an abstract class and cannot be instantiated. |
interface |
TurnMoveToPointBuilder
Represents the Move To Point Builder
To create a new instance of this class, use MoveCollection.createTurnMoveToPointBuilder(nxopen.cam.Move) Created in NX8.5.1 |
interface |
TurnOrientWcs
Represents an Turn Orient Wcs Builder
This is an abstract class, and cannot be instantiated. |
interface |
TurnOverlap
|
interface |
TurnPartProbing
Represents a Turn Part Probing operation
To create or edit an instance of this class, use TurnPartProbingBuilder Created in NX8.5.1 |
interface |
TurnPartProbingBuilder
Represents a Turn Part Probing Builder
To create a new instance of this class, use OperationCollection.createTurnPartProbingBuilder(nxopen.cam.CAMObject) Created in NX8.5.1 |
interface |
TurnProbeClearanceBuilder
Represents an probe start of engage Builder
To create a new instance of this class, use MoveCollection.createTurnProbeClearanceBuilder(nxopen.cam.Move) Created in NX8.5.1 |
interface |
TurnProbeInspectPointMoveBuilder
Represents the Turn Probe Inspect Point Move Builder
To create a new instance of this class, use MoveCollection.createTurnProbeInspectPointMoveBuilder(nxopen.cam.Move) Created in NX8.5.1 |
interface |
TurnRoughFinishLocalReturnBuilder
Represents an avoidance start Builder .
|
interface |
TurnRoughFinishTestCut
Represents a test cut builder .
|
interface |
TurnRoughVariableIncrementBuilder
Represents a Variable Increment Builder .
|
interface |
TurnStock
|
interface |
TurnThreadEngageRetractBuilder
Represents a Thread Turning Engage or Retract Builder .
|
interface |
TurnThreadFinishPassesBuilder
Represents a TurnThreadFinishPasses Builder .
|
interface |
TurnToolProbing
Represents a Turn tool operation
To create or edit an instance of this class, use TurnToolProbingBuilder Created in NX8.5.1 |
interface |
TurnToolProbingBuilder
Represents a Turn tool probing Builder
To create a new instance of this class, use OperationCollection.createTurnToolProbingBuilder(nxopen.cam.CAMObject) Created in NX8.5.1 |
interface |
Ude
Represets a User Defined Event
To create a new instance of this class, use UdeSet.createUde() Created in NX7.0.0 |
interface |
UdeList
Represents a list of objects.
|
interface |
UdeMoveBuilder
Represents the Ude Move Builder
To create a new instance of this class, use MoveCollection.createUdeMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
UdeParameter
Represents a User Defined Event Parameter .
|
interface |
UdeSet
Represets a set of User Defined Events .
|
interface |
UdtSectionBuilder
Represents a UdtSection Builder .
|
interface |
UpDownCutting
|
interface |
UserDefinedMoveBuilder
Represents the User Defined Move Builder
To create a new instance of this class, use MoveCollection.createUserDefinedMoveBuilder(nxopen.cam.Move, java.lang.String) Created in NX8.0.0 |
interface |
UserDefinedOpr
Represents a User Defined operation
To create or edit an instance of this class, use UserDefinedOprBuilder Created in NX7.5.0 |
interface |
UserDefinedOprBuilder
Represents a UserDefinedOpr Builder
This is an abstract class, and cannot be instantiated. |
interface |
VariableZLevelMilling
Represents a Variable Z Level Milling Operation
To create or edit an instance of this class, use VazlMillingBuilder Created in NX7.5.0 |
interface |
VazlMillingBuilder
Represents a VazlMilling Builder
To create a new instance of this class, use OperationCollection.createVazlMillingBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
VectorDistanceMoveBuilder
Represents the Vector Distance Move Builder
To create a new instance of this class, use MoveCollection.createVectorDistanceMoveBuilder(nxopen.cam.Move) Created in NX5.0.0 |
interface |
VerticalPosition
Represents a VerticalPosition Builder .
|
interface |
VolumeBased25DMillingOperation
Represents a Floor Wall Milling Operation
To create or edit an instance of this class, use VolumeBased25DMillingOperationBuilder Created in NX8.5.0 |
interface |
VolumeBased25DMillingOperationBuilder
Represents a VolumeBased25DMillingOperation Builder
To create a new instance of this class, use OperationCollection.createVolumeBased25dMillingOperationBuilder(nxopen.cam.CAMObject) Created in NX8.5.0 |
interface |
WedmArcOutputTypeCiBuilder
Represents a WedmArcOutputTypeCiBuilder .
|
interface |
WedmBasedGeomBuilder
Represents a WedmBasedGeom Builder
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createWedmBasedGeomBuilder Created in NX5.0.0 |
interface |
WedmCornerControlBuilder
Represents a WedmCornerControl Builder
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createWedmCornerControlBuilder Created in NX6.0.0 |
interface |
WedmCustomBoundaryDataBuilder
Represents a WedmCustomBoundaryData Builder
No Creator . |
interface |
WedmCustomBoundaryDataBuilderList
Represents a list of objects.
|
interface |
WedmCutOrderBuilder
Represents a
WedmCutOrderBuilder
This builder cannot be instantiated separately. |
interface |
WedmCutParameters
|
interface |
WedmCuttingBuilder
Represents a WedmCutting Builder
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createWedmCuttingBuilder Created in NX6.0.0 |
interface |
WedmExtGeomBuilder
Represents a WedmExtGeom Builder
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createWedmExtGeomBuilder Created in NX5.0.0 |
interface |
WedmFeatureGeomBuilder
Represents a WedmFeatureGeom Builder
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createWedmFeatureGeomBuilder Created in NX5.0.0 |
interface |
WedmIntGeomBuilder
Represents a WedmIntGeom Builder
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createWedmIntGeomBuilder Created in NX5.0.0 |
interface |
WedmLeadInOutBuilder
Represents a WedmLeadInOut Builder
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createWedmLeadInOutBuilder Created in NX6.0.0 |
interface |
WedmMachineControl
Represents a WEDM Machine Control operation
To create or edit an instance of this class, use WedmMachineControlBuilder Created in NX7.5.0 |
interface |
WedmMachineControlBuilder
Represents a WedmMachineControl Builder
To create a new instance of this class, use OperationCollection.createWedmMachineControlBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
WedmMoveControlBuilder
Represents a WedmMoveControl Builder
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createWedmMoveControlBuilder Created in NX6.0.0 |
interface |
WedmNocoreGeomBuilder
Represents a WedmNocoreGeom Builder
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createWedmNocoreGeomBuilder Created in NX5.0.0 |
interface |
WedmOpenGeomBuilder
Represents a WedmOpenGeom Builder
To create a new instance of this class, use nxopen.cam.NCGroupCollection#createWedmOpenGeomBuilder Created in NX5.0.0 |
interface |
WedmOperationBuilder
Represents a WedmOperation Builder
To create a new instance of this class, use OperationCollection.createWedmOperationBuilder(nxopen.cam.CAMObject) Created in NX7.5.0 |
interface |
WedmPointDefinitionBuilder
Represents a
WedmPointDefinitionBuilder
This builder cannot be instantiated separately. |
interface |
WedmStatusControlCiBuilder
Represents a WedmStatusControlCiBuilder .
|
interface |
WedmStepoverBuilder
|
interface |
WedmUserDefined
Represents a User Defined WEDM operation
To create or edit an instance of this class, use WedmUserDefinedBuilder Created in NX7.5.0 |
interface |
WedmUserDefinedBuilder
Represents a WedmUserDefined Builder
To create a new instance of this class, use OperationCollection.createWedmUserDefinedBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
interface |
WireGuide
Represents a wire guide object
To create a new instance of this class, use WireTool.createWireGuide() Created in NX9.0.0 |
interface |
WireGuideList
Represents a list of objects.
|
interface |
ZAxisSmoothing
|
interface |
ZLevelMilling
Represents a Z Level Milling Operation
To create or edit an instance of this class, use ZLevelMillingBuilder Created in NX7.5.0 |
interface |
ZLevelMillingBuilder
Represents a ZLevelMilling Builder
To create a new instance of this class, use OperationCollection.createZlevelMillingBuilder(nxopen.cam.CAMObject) Created in NX5.0.0 |
Modifier and Type | Method and Description |
---|---|
TaggedObject |
NcmTransferBuilder.approachPostCommands()
Returns the approach post commands
License requirements: None. |
TaggedObject |
NcmTransferBuilder.departurePostCommands()
Returns the departure post commands
License requirements: None. |
TaggedObject[] |
ToolPathTiltTilting.getTiltingDriveCurve()
The tilting drive curve
License requirements: None. |
TaggedObject |
ToolPathTiltTilting.tiltingDrivePoint()
Returns the tilting drive point
License requirements: None. |
TaggedObject |
NcmTransferBuilder.traversePostCommands()
Returns the traverse post commands
License requirements: None. |
Modifier and Type | Method and Description |
---|---|
BoundarySet[] |
Boundary.appendFaceBoundary(TaggedObject face,
boolean ignoreHole,
boolean ignoreIsland,
boolean ignoreChamfer,
BoundarySet.ToolSideTypes toolSide)
Append the face boundary
License requirements: cam_base ("CAM BASE") . |
void |
Boundary.removeFaceBoundary(TaggedObject face)
Remove the face boundaries
License requirements: cam_base ("CAM BASE") . |
void |
NcmTransferBuilder.setApproachPostCommands(TaggedObject newValue)
License requirements: cam_base ("CAM BASE") . |
void |
NcmTransferBuilder.setDeparturePostCommands(TaggedObject newValue)
License requirements: cam_base ("CAM BASE") . |
void |
ToolPathTiltTilting.setTiltingDriveCurve(TaggedObject[] curves)
The tilting drive curve
License requirements: None. |
void |
ToolPathTiltTilting.setTiltingDrivePoint(TaggedObject tiltingDrivePoint)
License requirements: None. |
void |
NcmTransferBuilder.setTraversePostCommands(TaggedObject newValue)
License requirements: cam_base ("CAM BASE") . |
Modifier and Type | Interface and Description |
---|---|
interface |
FeatureGeometry
Represents a feature geometry builder
This is an abstract class and cannot be instantiated. |
interface |
FeatureSet
Interface for feature set
To create a new instance of this class, use FeatureGeometry.createFeatureSet() Created in NX9.0.0 |
interface |
MachiningFeatureGeometry
Represents a feature geometry builder
An instance of this class can be obtained from CAM.HoleBossGeom#getCenterHoleGeometry or CAM.HoleBossGeom#getChamferHoleGeometry Created in NX9.0.0 |
interface |
ThreadFeatureGeometry
Represents a feature geometry builder
This is an abstract class and cannot be instantiated. |
Modifier and Type | Interface and Description |
---|---|
interface |
AddendumSectionUserDefinedBuilder
Represents a
AddendumSectionUserDefinedBuilder builder used to select a previously
defined section or a string of objects to define the section shape. |
interface |
DieAssistantFlangeProfile
|
interface |
DieAssistantFlangeProfileList
Represents a list of objects.
|
interface |
DieAssistantTrimProfile
|
interface |
DieAssistantTrimProfileList
Represents a list of objects.
|
interface |
DieAttributesBuilder
Represents a
DieAttributesBuilder . |
interface |
DieBooleanBuilder
Represents a
DieBooleanBuilder . |
interface |
DieBooleanBuilderList
Represents a list of objects.
|
interface |
DieDirectionBuilder
Represents a
DieDirectionBuilder . |
interface |
DieLimitsBuilder
Limits a path to a segment of the path.
|
interface |
DieLimitsBuilderList
Represents a list of objects.
|
interface |
DieLocationBuilderList
Represents a list of objects.
|
interface |
DieLocationsBuilder
Represents a
DieLocationsBuilder . |
interface |
DiePlaneBuilder
Represents a
DiePlaneBuilder . |
interface |
DrawBeadSegmentBuilder
Segment builder for Die Engineering draw bead.
|
interface |
DrawBeadSegmentBuilderList
Represents a list of objects.
|
interface |
DrawBeadTaperBuilder
Taper definition for the end of the Die Engineering Draw Bead.
|
interface |
PierceItemBuilder
|
interface |
PierceItemBuilderList
Represents a list of objects.
|
interface |
PressModelRoot
Represents a Die Simulation - Press Model Root.
|
interface |
UncutRegionsBuilder
Calculates the uncut regions of a curve given a radius value for the cut tool.
|
Modifier and Type | Interface and Description |
---|---|
interface |
Background
Represents a
Background
Background defines how background pixels are displayed. |
interface |
BoundedGrid
Represents a bounded grid
Bounded grids are not supported in KF. |
interface |
BoundedGridBuilder
Represents the builder for creating a bounded grid
BoundedGrid . |
interface |
Camera
|
interface |
CameraBuilder
Represents a
CameraBuilder
Cameras are not supported in KF. |
interface |
CgfxAttr
Deprecated.
Deprecated in NX10.0.0. No alternative provided for this class.
|
interface |
CgfxAttributeValueColor3Builder
Deprecated.
Deprecated in NX10.0.0. No alternative provided for this class.
|
interface |
CgfxAttributeValueColor4Builder
Deprecated.
Deprecated in NX10.0.0. No alternative provided for this class.
|
interface |
CgfxAttributeValueFileBuilder
Deprecated.
Deprecated in NX10.0.0. No alternative provided for this class.
|
interface |
CgfxAttributeValueFloat3Builder
Deprecated.
Deprecated in NX10.0.0. No alternative provided for this class.
|
interface |
CgfxAttributeValueFloat4Builder
Deprecated.
Deprecated in NX10.0.0. No alternative provided for this class.
|
interface |
CgfxAttributeValueIntegerBuilder
Deprecated.
Deprecated in NX10.0.0. No alternative provided for this class.
|
interface |
CgfxAttributeValueNumberBuilder
Deprecated.
Deprecated in NX10.0.0. No alternative provided for this class.
|
interface |
CgfxMattex
Deprecated.
Deprecated in NX10.0.0. No alternative provided for this class.
|
interface |
CgfxMattexBuilder
Deprecated.
Deprecated in NX10.0.0. No alternative provided for this class.
|
interface |
DatumPlaneGrid
Represents a grid on a datum plane
Datum plane grids are not supported in KF. |
interface |
DatumPlaneGridBuilder
Represents the builder for adding a datum plane grid
DatumPlaneGrid
to a datum plane. |
interface |
DecalBuilder
Represents a
DecalBuilder
This class is restricted to being called from a program running during an Interactive NX session. |
interface |
DynamicSection
Represents a dynamic section
To create or edit an instance of this class, use DynamicSectionBuilder Created in NX6.0.0 |
interface |
DynamicSectionBuilder
Represents a Dynamic Section Builder used for creating sections.
|
interface |
DynamicSectionCut
|
interface |
EntitySelectionPlane
Represents a grid on a datum plane
Entity selection planes are not supported in KF. |
interface |
ExtractScene
Represents a
ExtractScene
This class is restricted to being called from a program running during an Interactive NX session. |
interface |
FacetSettingsBuilder
Represents a
FacetSettingsBuilder
Facet Settings are not supported in KF. |
interface |
GlobalIlluminationBuilder
Represents a
GlobalIlluminationBuilder . |
interface |
Grid
Represents a grid
Grids are not supported in KF. |
interface |
GridBuilder
Represents the builder for adding a grid
Grid
This is an abstract class, and cannot be instantiated. |
interface |
Image
Represents a
Image
This class is restricted to being called from a program running during an Interactive NX session. |
interface |
ImageBase
Represents a
ImageBase that provides
definition, orientation, sizing, and display setting controls for image
based objects. |
interface |
ImageBaseBuilder
Represents a
ImageBaseBuilder . |
interface |
ImageBasedLighting
Represents a
ImageBasedLighting
Image-based Lighting (IBL) is only performed in High Quality Image
renderings. |
interface |
ImageData
Represents a
ImageData that stores the
contents of a previously imported image file in the part. |
interface |
LayerSettingsBuilder
Represents a builder for object layer settings.
|
interface |
LightBuilder
Represents a
LightBuilder
This class is restricted to being called from a program running during an Interactive NX session. |
interface |
Lighting
Represents a
Lighting
Lights are used to illuminate the scene in Shaded and Studio rendering
styles, as well as in High Quality Images. |
interface |
NonProportionalZoom
Provides non-proportional zoom capability
To create a new instance of this class, use ViewCollection.createNonProportionalZoom() Default values. |
interface |
PerspectiveOptionsBuilder
Represents a
PerspectiveOptionsBuilder
Cameras are not supported in KF. |
interface |
PlanarShipGrid
Represents a planar ship grid.
|
interface |
PlanarShipGridBuilder
Represents a
PlanarShipGrid builder. |
interface |
PlaneGrid
Represents a grid on a bounded plane
Plane grids are not supported in KF. |
interface |
PlaneGridBuilder
Represents the builder for adding a bounded grid
PlaneGrid
to a plane. |
interface |
RasterImage
Represents a
RasterImage that provides
placing an imported image onto a plane (with controls for orientation,
sizing, and display) to use as a reference in the model to create geometry. |
interface |
RasterImageBuilder
Represents a
RasterImageBuilder . |
interface |
RayTracedStudioBuilder
Represents a
RayTracedStudioBuilder . |
interface |
RayTracedStudioEditorBuilder
Represents a
RayTracedStudioEditorBuilder . |
interface |
Reflection
Represents a
Reflection
Reflection defines the source of reflection in shiny objects for Studio
rendering style or High Quality Images. |
interface |
SaveImageFileBrowserBuilder
Represents a
SaveImageFileBrowserBuilder . |
interface |
Scene
Represents a
Scene
A scene is comprised of background, stage, reflection, lights and
image-based lighting subobjects. |
interface |
SectionCurveSettingsBuilder
|
interface |
SelPref
Represents a
SelPref
To obtain a instance of this class use Display.SelPrefCollection#createSelPref Created in NX5.0.0 |
interface |
Shadows
Represents a
Shadows
This class is restricted to being called from a program running during an Interactive NX session. |
interface |
Stage
Represents a
Stage
A stage is an environment cube, a six-sided room, that can have between
one and six visible walls. |
interface |
StudioImageCaptureBuilder
Represents a
StudioImageCaptureBuilder
This class is restricted to being called from a program running during an Interactive NX session. |
interface |
TrueShading
Represents a True Shading object
TrueShading is not supported in KF. |
interface |
TrueShadingBuilder
Represents a
TrueShading builder To create a new instance of this class, use TrueShadingCollection.createTrueShadingBuilder(nxopen.display.TrueShading) Created in NX6.0.0 |
interface |
TrueStudio
Represents a True Shading object
TrueStudio is not supported in KF. |
interface |
TrueStudioBuilder
The TrueStudioBuillder manages Advanced Studio visualization display
To create a new instance of this class, use TrueStudioCollection.createTrueStudioBuilder(nxopen.display.TrueStudio) Created in NX8.0.0 |
interface |
Wall
Represents a
Wall
This class is restricted to being called from a program running during an Interactive NX session. |
Modifier and Type | Method and Description |
---|---|
TaggedObject |
CgfxMattexCollection.find(String journalIdentifier)
Deprecated.
Deprecated in NX10.0.0. No alternative provided for this class.
|
TaggedObject |
CgfxAttrCollection.find(String journalIdentifier)
Deprecated.
Deprecated in NX10.0.0. No alternative provided for this class.
|
TaggedObject[] |
PlanarShipGridBuilder.getIntersectedObjects()
Get the objects that were searched to find intersections with the plane.
|
Modifier and Type | Method and Description |
---|---|
CgfxAttributeValueColor3Builder |
CgfxAttrCollection.createAttributeValueColor3Builder(TaggedObject cgfxAttribute)
Deprecated.
Deprecated in NX10.0.0. No alternative provided for this class.
|
CgfxAttributeValueColor4Builder |
CgfxAttrCollection.createAttributeValueColor4Builder(TaggedObject cgfxAttribute)
Deprecated.
Deprecated in NX10.0.0. No alternative provided for this class.
|
CgfxAttributeValueFileBuilder |
CgfxAttrCollection.createAttributeValueFileBuilder(TaggedObject cgfxAttribute)
Deprecated.
Deprecated in NX10.0.0. No alternative provided for this class.
|
CgfxAttributeValueFloat3Builder |
CgfxAttrCollection.createAttributeValueFloat3Builder(TaggedObject cgfxAttribute)
Deprecated.
Deprecated in NX10.0.0. No alternative provided for this class.
|
CgfxAttributeValueFloat4Builder |
CgfxAttrCollection.createAttributeValueFloat4Builder(TaggedObject cgfxAttribute)
Deprecated.
Deprecated in NX10.0.0. No alternative provided for this class.
|
CgfxAttributeValueIntegerBuilder |
CgfxAttrCollection.createAttributeValueIntegerBuilder(TaggedObject cgfxAttribute)
Deprecated.
Deprecated in NX10.0.0. No alternative provided for this class.
|
CgfxAttributeValueNumberBuilder |
CgfxAttrCollection.createAttributeValueNumberBuilder(TaggedObject cgfxAttribute)
Deprecated.
Deprecated in NX10.0.0. No alternative provided for this class.
|
CgfxMattexBuilder |
CgfxMattexCollection.createCgfxMattexBuilder(TaggedObject cgfxmattex)
Deprecated.
Deprecated in NX10.0.0. No alternative provided for this class.
|
DecalBuilder |
DecalCollection.createDecalBuilder(TaggedObject decal)
Creates a
DecalBuilder object if decal is null. |
DecalBuilder |
DecalCollection.createDecalBuilderFull(TaggedObject decal)
Creates a
DecalBuilder object with image referenced object if decal is null. |
void |
PlanarShipGridBuilder.setIntersectedObjects(TaggedObject[] intersectedObjects)
Set the objects that are to be searched to find intersections with the plane.
|
Modifier and Type | Interface and Description |
---|---|
interface |
AnnotateViewsBuilder
This class is used to annotate views based on the knowledge fusion rules.
|
interface |
AttributeItemBuilder
Represents a
AttributeItemBuilder . |
interface |
AttributeItemBuilderList
Represents a list of objects.
|
interface |
AutomationPreferencesBuilder
the builder for Drafting Automation Preferences
To create a new instance of this class, use AutomationManager.createPreferencesBuilder() Created in NX8.0.0 |
interface |
AutomationRuleBuilder
|
interface |
BaseEditSettingsBuilder
Represents a
BaseEditSettingsBuilder . |
interface |
CutCopyPasteBuilder
Represents a paste in Drafting.
|
interface |
CutCopyPasteLeaderBuilder
Represents a Drafting Paste, especially when reassociating a leader on paste.
|
interface |
DistributeAnnotationsBuilder
This class is used to distribute annotations associated to a view.
|
interface |
DrawingCreationWizardBuilder
Represents a
DrawingCreationWizardBuilder . |
interface |
MoveToDrawingViewBuilder
This builder allows the user to extract contents from a sheet and transfer them to a new Drawing
view, also provide some other options for view creation
To create a new instance of this class, use DraftingApplicationManager.createMoveToDrawingViewBuilder() Default values. |
interface |
PreferencesBuilder
Represents a
PreferencesBuilder builder To create a new instance of this class, use SettingsManager.createPreferencesBuilder() Default values. |
interface |
PrimaryContentItemBuilder
Represents a
PrimaryContentItemBuilder . |
interface |
PrimaryContentItemBuilderList
Represents a list of objects.
|
interface |
RulesBuilder
This class is used to specify knowledge fusion rules in a drawing template.
|
interface |
SmashDrawingViewBuilder
This builder allows the user to break a Drawing View into its parts and delete the Drawing View
To create a new instance of this class, use DraftingApplicationManager.createSmashDrawingViewBuilder() Created in NX8.5.0 |
interface |
SpecifyRuleBuilder
This class is used to specify knowledge fusion rule for a note object in a drawing template.
|
Modifier and Type | Interface and Description |
---|---|
interface |
AddObjectsToRegionBuilder
Creates the builder for associating the symbols from library to the region
To create a new instance of this class, use DrawingRegionCollection.createAddObjectsToRegionBuilder() Created in NX8.0.0 |
interface |
AddRemoveBoxViewBuilder
This class is used to construct the add remove box view Builder
To create a new instance of this class, use DraftingViewCollection.createAddRemoveBoxViewBuilder(nxopen.drawings.DraftingView) Created in NX8.0.0 |
interface |
AutomationBookletBuilder
|
interface |
AutomationTemplateRegionBuilder
|
interface |
BaseHalfSectionLine
Represents a Base Half Section Line.
|
interface |
BasePointToPointSectionLine
Represents a Base Point to Point Section Line.
|
interface |
BaseSteppedSectionLine
Represents a Base Stepped Section Line.
|
interface |
BaseView
Represents a Base View.
|
interface |
BaseViewBuilder
Represents a
BaseView builder To create a new instance of this class, use DraftingViewCollection.createBaseViewBuilder(nxopen.drawings.BaseView) Default values. |
interface |
BorderAndZoneStyleBuilder
Represents the Border and Zone Style Builder which manages all the style attributes related
to sheet borders, sheet margins and sheet zones.
|
interface |
BordersAndZones
Represents Borders and Zones
To create or edit an instance of this class, use BordersAndZonesBuilder Created in NX8.0.0 |
interface |
BordersAndZonesBuilder
Builder for creating Borders and Zones.
|
interface |
BrokenViewBuilder
This class is used to construct the broken view Builder
To create a new instance of this class, use DraftingViewCollection.createBrokenViewBuilder(nxopen.drawings.ViewBreak) Default values. |
interface |
CustomViewSettingsBuilder
this class represents the "this class represents Drawings.CustomViewSettingsBuilder..
|
interface |
DetailView
Represents a Detail View.
|
interface |
DetailViewBuilder
Represents a
DetailView . |
interface |
DraftingBody
Represents a drafting body.
|
interface |
DraftingCurve
Represents a Drafting VD Curve.
|
interface |
DraftingView
Represents a drafting view.
|
interface |
DrawingCompareSettingsBuilder
Represents a
DrawingCompareSettingsBuilder builder To create a new instance of this class, use DrawingCompareManager.createDrawingCompareSettingsBuilder() Default values. |
interface |
DrawingRegion
Represents a Drawing Region
To create or edit an instance of this class, use DrawingRegionBuilder Created in NX8.0.0 |
interface |
DrawingRegionBuilder
Represents a Drawing Region Builder
To create a new instance of this class, use DrawingRegionCollection.createDrawingRegionBuilder(nxopen.drawings.DrawingRegion) Default values. |
interface |
DrawingRegionRulesBuilder
Represents a Drawing region rules builder .
|
interface |
DrawingView
Drawing View - an empty view created without any geometric objects.
|
interface |
DrawingViewBuilder
This builder allows the user to create a Drawing View
To create a new instance of this class, use DraftingViewCollection.createDrawingViewBuilder(nxopen.drawings.DrawingView) Default values. |
interface |
EditSectionLineSettingsBuilder
Represents a
EditSectionLineSettingsBuilder builder. |
interface |
EditViewLabelSettingsBuilder
Represents a
EditViewLabelSettingsBuilder builder. |
interface |
EditViewSettingsBuilder
Represents a
EditViewSettingsBuilder builder. |
interface |
GeneralWorkFlowBuilder
|
interface |
HalfPictorialSectionLine
Half Pictorial Section Line is used to create a pictorial view with
half of the part sectioned and the other half un-sectioned.
|
interface |
HalfSectionLine
Half Section Line is used to create a view with half of the part
sectioned and the other half un-sectioned.
|
interface |
HalfSectionLineBuilder
Deprecated.
Deprecated in NX10.0.0. Use
Drawings.SectionViewBuilder#sectionViewType instead.
|
interface |
HiddenObjectsBuilder
This builder allows the user to select a view in which
component objects can be designated as hidden or shown .
|
interface |
HingeLineBuilder
Represents a Drawings.HingeLineBuilder.
|
interface |
MarkAsTemplateBuilder
Represents a
MarkAsTemplateBuilder
To create a new instance of this class, use nxopen.draftingManager#createMarkAsTemplateBuilder Created in NX8.0.0 |
interface |
MultipleViewPlacementBuilder
This builder allows the user to create a Multiple View Placement .
|
interface |
OrientedSectionLine
Represents a Oriented Section Line.
|
interface |
OrientedSectionLineBuilder
Deprecated.
Deprecated in NX10.0.0. This API is not supported yet and should not be used.
|
interface |
OvtBuilder
|
interface |
ParentViewBuilder
Represents a
ParentViewBuilder . |
interface |
PictorialSectionLine
A Pictorial Simple or Pictorial Stepped Section Line.
|
interface |
PointAndAngleSectionLine
Point and Angle Section Line lets you create a view with multiple
segment cuts with no bends.
|
interface |
PointAndAngleSectionLineBuilder
Deprecated.
Deprecated in NX10.0.0. This API is not supported yet and should not be used.
|
interface |
PointToPointSectionLine
Point to Point Section Line lets you create a view with multiple
segment cuts with no bends.
|
interface |
PointToPointSectionLineBuilder
Deprecated.
Deprecated in NX10.0.0. Use
Drawings.SectionViewBuilder#sectionViewType instead.
|
interface |
ProjectedView
Represents a Projected View.
|
interface |
ProjectedViewBuilder
Represents a
ProjectedView builder To create a new instance of this class, use DraftingViewCollection.createProjectedViewBuilder(nxopen.drawings.ProjectedView) Default values. |
interface |
ProjectedViewOrientationBuilder
|
interface |
RefineDisplayBuilder
Represents a
RefineDisplayBuilder . |
interface |
RemoveObjectsBuilder
Creates the builder for removing associated objects from the region
To create a new instance of this class, use DrawingRegionCollection.createRemoveObjectsBuilder() Created in NX8.0.0 |
interface |
RenderSet
Represents a RenderSet.
|
interface |
RevolvedSectionLine
Revolved Section Line is used to create section views which are
revolved about an axis.
|
interface |
RevolvedSectionLineBuilder
Deprecated.
Deprecated in NX10.0.0. Use
Drawings.SectionViewBuilder#sectionViewType instead.
|
interface |
SectionInViewBuilder
This builder allows the user to select a view in which component or
solid body objects can be designated as section, non-sectioned, or neither
To create a new instance of this class, use DraftingViewCollection.createSectionInViewBuilder() Default values. |
interface |
SectionLine
Represents a Section Line.
|
interface |
SectionLineBuilder
Deprecated.
Deprecated in NX10.0.0. Use
nxopen.drawings.SectionViewBuilder#sectionLineType
|
interface |
SectionLineSegmentBuilder
Represents a
SectionLineSegmentBuilder . |
interface |
SectionLineSegmentBuilderList
Represents a list of objects.
|
interface |
SectionLineSegmentPointBuilder
Represents Section Line Segment Point Builder
To create a new instance of this class, use SectionLineSegmentPointListBuilder.createSectionLineSegmentPointBuilder() Created in NX10.0.0 |
interface |
SectionLineSegmentPointListBuilder
Represents SectionLineSegmentPointListBuilder class.
|
interface |
SectionLineSegmentsBuilder
Represents a class Drawings.SectionLineSegmentsBuilder.
|
interface |
SectionLineSettingsBuilder
Represents the Section Line Settings Builder (Drawings.SectionLineSettingsBuilder) which manages all the style attributes related
to the section Line including label letter.
|
interface |
SectionLineStyleBuilder
Represents a Drawings.SectionLineStyleBuiler.
|
interface |
SectionView
Represents a Section View.
|
interface |
SectionViewBuilder
Represents a
SectionView builder To create a new instance of this class, use DraftingViewCollection.createSectionViewBuilder(nxopen.NXObject) Default values. |
interface |
SelectDraftingView
Represents a single object selection.
|
interface |
SelectDraftingViewList
Represents a list of objects on a selection list.
|
interface |
SelectDrawingRegion
Represents a single object selection.
|
interface |
SelectDrawingView
Represents a single object selection.
|
interface |
SelectDrawingViewList
Represents a list of objects on a selection list.
|
interface |
SelectModelViewBuilder
Represents a Select Model View builder that selects a model view
.
|
interface |
SelectRegionBuilder
Creates the builder for associating the objects from the screen
To create a new instance of this class, use DrawingRegionCollection.createSelectRegionBuilder() Created in NX8.0.0 |
interface |
SelectSectionLine
Represents a single object selection.
|
interface |
SheetBorderSettingsBuilder
Represents a
SheetBorderSettingsBuilder . |
interface |
SheetMarginSettingsBuilder
Represents the Drawing Sheet Margins Style Builder.
|
interface |
SheetZoneReferenceBuilder
builder for creating sheet zone refernce control strings based on the selected attribute and view
To create a new instance of this class, use nxopen.draftingManager#createSheetZoneReferenceBuilder Created in NX8.0.0 |
interface |
SheetZoneSettingsBuilder
Represents the Drawing Sheet Zone Setting Style Builder.
|
interface |
ShipDraftingViewLinesBuilder
Represents a ship view lines block
To create a new instance of this class, use DraftingViewCollection.createShipDraftingViewLinesBuilder() Created in NX10.0.0 |
interface |
ShipDraftingViewLinesBuilderList
Represents a list of objects.
|
interface |
SketchedHalfSectionLine
Sketched Half Section Line is sketch based section line.
|
interface |
SketchedPointToPointSectionLine
Sketched Point to Point Section Line is sketch based section line.
|
interface |
SketchedSteppedSectionLine
A Sketched Simple or Stepped Section Line is sketch based section line.
|
interface |
SketchSectionLineBuilder
Represents a
Drawings.SectionLine builder To create a new instance of this class, use SectionLineCollection.createSketchSectionLineBuilder(nxopen.drawings.SectionLine) Default values. |
interface |
SpecifySectionLineBuilder
Select a section line .
|
interface |
StandardViewsBuilder
This builder allows the user to create a Drawing View
To create a new instance of this class, use DraftingViewCollection.createStandardViewsBuilder() Default values. |
interface |
SteppedSectionLine
A Simple or Stepped Section Line.
|
interface |
SteppedSectionLineBuilder
Deprecated.
Deprecated in NX10.0.0. Use
Drawings.SectionViewBuilder#sectionViewType instead.
|
interface |
SvtBuilder
|
interface |
UpdateViewsBuilder
Represents a
UpdateViewsBuilder
To create a new instance of this class, use DraftingViewCollection.createUpdateViewsBuilder() Created in NX5.0.0 |
interface |
View2dOrientBuilder
Represents the View 2D Orientation (Drawings.View2dOrientBuilder)
Created in NX6.0.0 |
interface |
ViewAlignment
View Alignment object.
|
interface |
ViewAlignmentBuilder
Represents a
ViewAlignmentBuilder .This class is used to construct the view alignment Builder To create a new instance of this class, use ViewAlignmentCollection.createViewAlignmentBuilder() Default values. |
interface |
ViewBoundaryBuilder
Represents the View Boundary (Drawings.ViewBoundaryBuilder)
Created in NX6.0.0 |
interface |
ViewBreak
ViewBreak - defines the portion of a view that gets hidden to
produce a broken view
To create or edit an instance of this class, use BrokenViewBuilder Created in NX7.5.0 |
interface |
ViewBreakBuilder
Represents a
ViewBreakBuilder This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0 |
interface |
ViewCommonViewLabelBuilder
|
interface |
ViewCopyTo3dBuilder
Represents a
ViewCopyTo3dBuilder . |
interface |
ViewCreationWizardBuilder
This builder allows the user to create a Drawing View
To create a new instance of this class, use DraftingViewCollection.createViewCreationWizardBuilder() Default values. |
interface |
ViewDetailLabelBuilder
|
interface |
ViewLabelBuilder
|
interface |
ViewOrientationBuilder
Represents a ViewOrientationBuilder.
|
interface |
ViewPlacementBuilder
Represents a
ViewPlacementBuilder . |
interface |
ViewProjectedArrowSettingsBuilder
|
interface |
ViewProjectedLabelBuilder
|
interface |
ViewProjectedViewSettingsBuilder
|
interface |
ViewProjectionBuilder
Represents a
ViewProjectionBuilder . |
interface |
ViewProjectionPlaneBuilder
Represents the View Projection Plane (Drawings.ViewProjectionPlaneBuilder)
Created in NX6.0.2 |
interface |
ViewScaleBuilder
Represents the View Scale (Drawings.ViewScaleBuilder)
Created in NX6.0.0 |
interface |
ViewSectionLabelBuilder
|
interface |
ViewSectionLineBuilder
|
interface |
ViewStyleBaseBuilder
Represents the BASE tab on the View Style Dialog (Drawings.ViewStyleBaseBuilder)
Created in NX6.0.0 |
interface |
ViewStyleBuilder
Represents the View Style Builder (Drawings.ViewStyleBuilder) which manages all the style attributes related
to the view including base view, projected view, drawing view, detail view, broken view, section view etc.
|
interface |
ViewStyleDetailBuilder
Represents the DETAIL tab on the View Style Dialog (Drawings.ViewStyleDetailBuilder)
Created in NX6.0.0 |
interface |
ViewStyleFPCalloutConfigBuilder
Represents the Callout section of the Flat Pattern tab on the View Style Dialog (Drawings.ViewStyleFPCalloutsBuilder)
Created in NX9.0.0 |
interface |
ViewStyleFPCalloutsBuilder
Represents the Callout section of the Flat Pattern tab on the View Style Dialog (Drawings.ViewStyleFPCalloutsBuilder)
Created in NX6.0.0 |
interface |
ViewStyleFPCurvesBuilder
Represents the Curve section of the Flat Pattern tab on the View Style Dialog (Drawings.ViewStyleFPCurvesBuilder)
Created in NX6.0.0 |
interface |
ViewStyleGeneralBuilder
Represents view style general builder (Drawings.ViewStyleGeneralBuilder) which manages all the general
attributes which are necessary for all the views.
|
interface |
ViewStyleHiddenLinesBuilder
Represents the HIDDEN LINES tab on the View Style Dialog (Drawings.ViewStyleHiddenLinesBuilder)
Created in NX6.0.0 |
interface |
ViewStyleInheritPmiBuilder
Represents the INHERIT PMI tab on the View Style Dialog (Drawings.ViewStyleInheritPmiBuilder)
Created in NX6.0.0 |
interface |
ViewStyleOrientationBuilder
Represents the ORIENTATION tab on the View Style Dialog (Drawings.ViewStyleOrientationBuilder)
Created in NX6.0.0 |
interface |
ViewStylePerspectiveBuilder
Represents the PERSPECTIVE tab on the View Style Dialog (Drawings.ViewStylePerspectiveBuilder)
Created in NX6.0.0 |
interface |
ViewStyleProjectedBuilder
Represents the PROJECTED tab on the View Style Dialog (Drawings.ViewStyleProjectedBuilder)
Created in NX6.0.0 |
interface |
ViewStyleSectionBuilder
Represents the SECTION tab on the View Style Dialog (Drawings.ViewStyleSectionBuilder)
Created in NX6.0.0 |
interface |
ViewStyleSectionConstraintsBuilder
Represents the SECTION CONSTRAINTS tab on the View Style Dialog (Drawings.ViewStyleSectionConstraintsBuilder)
Created in NX6.0.0 |
interface |
ViewStyleShadingBuilder
Represents the SHADING tab on the View Style Dialog (Drawings.ViewStyleShadingBuilder)
Created in NX6.0.0 |
interface |
ViewStyleShipbuildingLinesBuilder
Represents the Shipbuilding LINES tab on the View Style Dialog (Drawings.ViewStyleShipbuildingLinesBuilder)
To create a new instance of this class, use DraftingViewCollection.createShipbuildingLineBuilder() Created in NX8.0.0 |
interface |
ViewStyleShipbuildingLinesBuilderList
Represents a list of objects.
|
interface |
ViewStyleSmoothEdgesBuilder
Represents the SMOOTH EDGES tab on the View Style Dialog (Drawings.ViewStyleSmoothEdgesBuilder)
Created in NX6.0.0 |
interface |
ViewStyleThreadsBuilder
Represents the THREADS tab on the View Style Dialog (Drawings.ViewStyleThreadsBuilder)
Created in NX6.0.0 |
interface |
ViewStyleTraceLinesBuilder
Represents the TRACE LINES tab on the View Style Dialog (Drawings.ViewStyleTraceLinesBuilder)
Created in NX6.0.0 |
interface |
ViewStyleVirtualIntersectionsBuilder
Represents the VIRTUAL INTERSECTIONS tab on the View Style Dialog (Drawings.ViewStyleVirtualIntersectionsBuilder)
Created in NX6.0.0 |
interface |
ViewStyleVisibleLinesBuilder
Represents the VISIBLE LINES tab on the View Style Dialog (Drawings.ViewStyleVisibleLinesBuilder)
Created in NX6.0.0 |
interface |
ViewWorkflowBuilder
|
Modifier and Type | Interface and Description |
---|---|
interface |
BestFitAlignBuilder
This class performs the best fit alignment between objects
To create a new instance of this class, use FacetedBodyCollection.createBestFitAlignBuilder() Created in NX6.0.0 |
interface |
BridgeFacetBodyBuilder
Represents a
BridgeFacetBodyBuilder
It bridges two disjoint NX facet bodies. |
interface |
CleanupFacetBodyBuilder
Represents a
CleanupFacetBodyBuilder builder. |
interface |
CombineFacetBodyBuilder
Represents a
CombineFacetBodyBuilder builder. |
interface |
ConvertFacetBodyBuilder
Represents a
ConvertFacetBodyBuilder builder. |
interface |
CurvatureBuilder
Represents a
CurvatureBuilder . |
interface |
DecimateFacetBodyBuilder
Represents a
DecimateFacetBodyBuilder . |
interface |
DetectPrimitivesBuilder
This class manages the primitive shape detection for a facet body.
|
interface |
ExtrudeFacetBodyBuilder
Represents a
ExtrudeFacetBodyBuilder
It extrudes a NX Facet Body. |
interface |
ExtrudeProfileBuilder
Represents a
ExtrudeProfileBuilder
It extrudes 3D closed profile between planes. |
interface |
FacetBodyFromBodyBuilder
Represents a
FacetBodyFromBodyBuilder builder. |
interface |
FacetedBody
Represents a faceted body.
|
interface |
FacetedEdge
Represents a faceted edge.
|
interface |
FacetedFace
Represents a faceted face.
|
interface |
FeatureExtractionBuilder
Represents a
FeatureExtractionBuilder
It extracts feature lines or separates regions of different curvature
from a facet body based on the curvature map. |
interface |
FillHoleBuilder
This class finds and fills holes to a prescribed boundary smoothness condition
To create a new instance of this class, use FacetedBodyCollection.createFillHoleBuilder() Default values. |
interface |
MergeFacetBodyBuilder
Represents a
MergeFacetBodyBuilder
It merges two overlapping NX facet bodies. |
interface |
MultiPatchAlignmentBuilder
Aligns multiple facet bodies to one another without using reference points.
|
interface |
PaintBrushBuilder
This class manages the paint brush utility for a facet body.
|
interface |
PaintFacetBodyBuilder
This class manages the color painting on a facet body.
|
interface |
SelectFacetedBody
Represents a single object selection.
|
interface |
SelectFacetedBodyList
Represents a list of objects on a selection list.
|
interface |
SewFacetBodyBuilder
Represents a
SewFacetBodyBuilder
It sews two touching NX facet bodies. |
interface |
SmoothFacetBodyBuilder
Represents a
SmoothFacetBodyBuilder . |
interface |
SnipFacetBodyBuilder
Represents a SnipFacetBody builder
To create a new instance of this class, use FacetedBodyCollection.createSnipFacetBodyBuilder() Default values. |
interface |
SubdivideFacetBodyBuilder
This class provides functionality to subdivide the polygons to increase the density of the facet bodies.
|
Modifier and Type | Interface and Description |
---|---|
interface |
CopyPasteBuilder
Represents a
CopyPasteBuilder
To create a new instance of this class, use FeatureCollection.createCopyPasteBuilder2(nxopen.NXObject[]) Created in NX6.0.0 |
interface |
CurveFinderBuilder
Represents a collection of curves and their relationships to other curves in the model .
|
interface |
EditDimensionBuilder
Represents a builder of edit feature dimensions
To create a new instance of this class, use FeatureCollection.createEditDimensionBuilder() Default values. |
interface |
EmbeddedOperationBuilder
Represents an EmbeddedOperationBuilder
This is an abstract class, and cannot be instantiated. |
interface |
EmbossJoggle
Represents a joggle object.
|
interface |
EmbossLimit
Represents emboss start and end objects, meaning, targets and end-cap definitions.
|
interface |
EmbossProjection
Represents a projection object.
|
interface |
EmbossRegion
Represents an emboss region object.
|
interface |
EmbossSidewall
Represents an emboss sidewall object.
|
interface |
EmbossTaper
Represents a taper object.
|
interface |
EmbossTarget
Represents a target object.
|
interface |
FaceRecognitionBuilder
Represents a collection of faces and their relationships to other faces in the model .
|
interface |
FeatureReferencesBuilder
|
interface |
FeatureReplayBuilder
Represents a
FeatureReplayBuilder builder. |
interface |
GeometricConstraintData
Represents Geometric Constraint Data class.
|
interface |
GeometricConstraintDataManager
Represents Geometric Constraint Data Manager class.
|
interface |
GeometricConstraintDataSetManager
Represents Geometric Constraint Data Set Manager class.
|
interface |
GlobalShapingCurveOffsetBuilderList
Represents a list of objects.
|
interface |
GlobalShapingPointOffsetBuilder
The class used to define the points and offsets needed for the target point list.
|
interface |
GlobalShapingPointOffsetBuilderList
Represents a list of objects.
|
interface |
GuidedExtensionBuilderEx
Represents a
GuidedExtensionEx builder
To create a new instance of this class, use FeatureCollection.createGuidedExtensionBuilderEx(Feature) Default values. |
interface |
MatchedReferenceBuilder
|
interface |
MeshTransformerBuilder
Represents a
MeshTransformer builder
To create a new instance of this class, use FeatureCollection.createMeshTransformerBuilder(Feature) Default values. |
interface |
MoveObjectBuilder
Represents a
MoveObjectBuilder To create a new instance of this class, use BaseFeatureCollection.createMoveObjectBuilder(nxopen.features.MoveObject) Default values. |
interface |
OptimizeCurveBuilder
Represents a builder of optimize curve
To create a new instance of this class, use FeatureCollection.createOptimizeCurveBuilder() Default values. |
interface |
OptimizeFaceBuilder
Represents a builder of optimize face
To create a new instance of this class, use FeatureCollection.createOptimizeFaceBuilder() Default values. |
interface |
PaintParametersBuilder
Represents a paint feature parameters builder.
|
interface |
PartGeometryCopyBuilder
|
interface |
PartGeometryCopySelectBuilder
|
interface |
PartGeometryCopySelectBuilderList
Represents a list of objects.
|
interface |
PointSetFacePercentageBuilder
Represents a
PointSetFacePercentageBuilder . |
interface |
PointSetFacePercentageBuilderList
Represents a list of objects.
|
interface |
ReferenceMapperBuilder
Represents a
ReferenceMapperBuilder
It is used in the context of Boolean Target/Tool Mapping. |
interface |
RemoveParametersBuilder
Represents a
RemoveParametersBuilder . |
interface |
SectionEdit
Represents a section edit feature
To create or edit an instance of this class, use SectionEditBuilder Created in NX6.0.0 |
interface |
SelectDatumCsysList
Represents a list of objects on a selection list.
|
interface |
SelectFeatureList
Represents a list of objects on a selection list.
|
interface |
SelectFlatPattern
Represents a single object selection.
|
interface |
SelectPartModule
Represents a single object selection.
|
interface |
ShowRelatedFacesBuilder
Represents a builder for a Show Related Faces.
|
interface |
SmoothRangeBuilder
Represents a
SmoothRangeBuilder builder
To create a new instance of this class, use FlowBlendBuilder.newSmoothRange() Created in NX10.0.0 |
interface |
SmoothRangeBuilderList
Represents a list of objects.
|
interface |
TabNoteCfgBuilder
|
interface |
UserDefinedFeatureApplicationData
JA interface for UserDefinedFeatureApplicationData object .
|
interface |
UserDefinedFeatureApplicationField
JA interface for UserDefinedFeatureApplicationField object .
|
interface |
UserDefinedFeatureCopyEvent
JA interface for the UserDefinedFeatureCopyEvent object
This calls cannot be created . |
interface |
UserDefinedFeatureCreateEvent
JA interface for the UserDefinedFeatureCreateEvent object
This calls cannot be created . |
interface |
UserDefinedFeatureEditEvent
JA interface for the UserDefinedFeatureEditEvent object
This calls cannot be created . |
interface |
UserDefinedFeatureExpressionData
JA interface for UserDefinedFeatureExpressionData object.
|
interface |
UserDefinedFeatureIconEvent
JA interface for the UserDefinedFeatureIconEvent object
This calls cannot be created . |
interface |
UserDefinedFeatureReferenceData
JA interface for UserDefinedFeatureReference object.
|
interface |
UserDefinedFeatureUpdateEvent
JA interface for the UserDefinedFeatureUpdateEvent object
This calls cannot be created . |
interface |
VariableRadiusPointsBuilder
Represents a
VariableRadiusPointsBuilder builder
To create a new instance of this class, use FlowBlendBuilder.newControlPoint() Created in NX10.0.0 |
interface |
VariableRadiusPointsBuilderList
Represents a list of objects.
|
interface |
WaveInterfaceLinkerBuilder
Represents a WaveInterfacelinker Feature builder
To create a new instance of this class, use BaseFeatureCollection.createWaveInterfaceLinkerBuilder(Feature) Default values. |
Modifier and Type | Field and Description |
---|---|
TaggedObject |
FlatPattern.ObjectDataGeneral.flatPatternObject
Object in the flat pattern
|
TaggedObject |
FlatSolid.ObjectDataCsys.flatSolidObject
object on flat solid
|
TaggedObject |
FlatPattern.ObjectDataGeneral.flatSolidObject
Corresponding object on the flat solid
|
TaggedObject |
FlatSolid.ObjectDataCsys.formedBodyObject
corresponding object on formed body
|
TaggedObject |
FlatPattern.ObjectDataGeneral.formedBodyObject
Corresponding object on the formed body
|
Modifier and Type | Method and Description |
---|---|
TaggedObject |
FlatSolid.getEntityOnFlat(TaggedObject entity)
Returns face or edge on flat solid body corresponding to face or edge on formed body.
|
TaggedObject[] |
UserDefinedFeatureApplicationField.getObjects()
Gets all of the objects in this field
License requirements: None. |
TaggedObject[] |
WaveSketchBuilder.getSourcePartOccurrences()
Gets source part occurrences
License requirements: None. |
TaggedObject[] |
WavePointBuilder.getSourcePartOccurrences()
Gets source part occurrences
License requirements: None. |
TaggedObject[] |
WaveDatumBuilder.getSourcePartOccurrences()
Gets source part occurrences
License requirements: None. |
TaggedObject[] |
MirrorBodyBuilder.getSourcePartOccurrences()
Gets source part occurrences
License requirements: None. |
TaggedObject[] |
ExtractFaceBuilder.getSourcePartOccurrences()
Gets source part occurrences
License requirements: None. |
TaggedObject[] |
CompositeCurveBuilder.getSourcePartOccurrences()
Gets source part occurrences
License requirements: None. |
TaggedObject |
FlatSolid.mapFlattenedGeomToInputGeom(TaggedObject flatGeom)
Returns PCB component or restriction area or additional geometry for the given component or curve on flat solid.
|
TaggedObject[] |
FlatSolid.mapInputGeomToFlattenedGeom(TaggedObject input)
Returns output component or array of curves on flat solid for the given PCB component or restriction area or additional geometry.
|
TaggedObject |
UserDefinedFeatureReferenceData.reference()
Returns the reference of a user defined feature
License requirements: None. |
TaggedObject |
WaveSketchBuilder.sourcePartOccurrence()
Returns the source part occurrence
License requirements: None. |
TaggedObject |
WavePointBuilder.sourcePartOccurrence()
Returns the source part occurrence
License requirements: None. |
TaggedObject |
WaveInterfaceLinkerBuilder.sourcePartOccurrence()
Returns the source part occurrence
License requirements: None. |
TaggedObject |
WaveDatumBuilder.sourcePartOccurrence()
Returns the source part occurrence
License requirements: None. |
TaggedObject |
MirrorBodyBuilder.sourcePartOccurrence()
Returns the source part occurrence
License requirements: None. |
TaggedObject |
ExtractFaceBuilder.sourcePartOccurrence()
Returns the source part occurrence
License requirements: None. |
TaggedObject |
CompositeCurveBuilder.sourcePartOccurrence()
Returns the source part occurrence
License requirements: None. |
Modifier and Type | Method and Description |
---|---|
ScalarMatrixValue |
FlatSolid.getComponentTransformation(TaggedObject component)
Returns a 4x4 transformation matrix for the given PCB component or restriction area on the flat solid.
|
TaggedObject |
FlatSolid.getEntityOnFlat(TaggedObject entity)
Returns face or edge on flat solid body corresponding to face or edge on formed body.
|
ScalarMatrixValue |
FlatSolid.getFaceTransformation(TaggedObject face)
Returns a 4x4 transformation matrix for the given SM planar face on flat solid body.
|
void |
WaveInterfaceLinkerBuilder.insertObjects(TaggedObject[] selectedObjects)
Insert selected objects
License requirements: None. |
TaggedObject |
FlatSolid.mapFlattenedGeomToInputGeom(TaggedObject flatGeom)
Returns PCB component or restriction area or additional geometry for the given component or curve on flat solid.
|
TaggedObject[] |
FlatSolid.mapInputGeomToFlattenedGeom(TaggedObject input)
Returns output component or array of curves on flat solid for the given PCB component or restriction area or additional geometry.
|
void |
WaveInterfaceLinkerBuilder.removeObjects(TaggedObject[] removedObjects)
Remove unselected objects
License requirements: None. |
void |
UserDefinedFeatureApplicationField.setObjects(TaggedObject[] objects)
Sets all of the objects in this field
License requirements: None. |
void |
WaveSketchBuilder.setSourcePartOccurrence(TaggedObject sourcePartOcc)
License requirements: None. |
void |
WavePointBuilder.setSourcePartOccurrence(TaggedObject sourcePartOcc)
License requirements: None. |
void |
WaveInterfaceLinkerBuilder.setSourcePartOccurrence(TaggedObject sourcePartOcc)
License requirements: None. |
void |
WaveDatumBuilder.setSourcePartOccurrence(TaggedObject sourcePartOcc)
License requirements: None. |
void |
MirrorBodyBuilder.setSourcePartOccurrence(TaggedObject sourcePartOcc)
License requirements: None. |
void |
ExtractFaceBuilder.setSourcePartOccurrence(TaggedObject sourcePartOcc)
License requirements: None. |
void |
CompositeCurveBuilder.setSourcePartOccurrence(TaggedObject sourcePartOcc)
License requirements: None. |
void |
WaveSketchBuilder.setSourcePartOccurrences(TaggedObject[] sourcePartOccurrences)
Sets source part occurrences
License requirements: None. |
void |
WavePointBuilder.setSourcePartOccurrences(TaggedObject[] sourcePartOccurrences)
Sets source part occurrences
License requirements: None. |
void |
WaveDatumBuilder.setSourcePartOccurrences(TaggedObject[] sourcePartOccurrences)
Sets source part occurrences
License requirements: None. |
void |
MirrorBodyBuilder.setSourcePartOccurrences(TaggedObject[] sourcePartOccurrences)
Sets source part occurrences
License requirements: None. |
void |
ExtractFaceBuilder.setSourcePartOccurrences(TaggedObject[] sourcePartOccurrences)
Sets source part occurrences
License requirements: None. |
void |
CompositeCurveBuilder.setSourcePartOccurrences(TaggedObject[] sourcePartOccurrences)
Sets source part occurrences
License requirements: None. |
Constructor and Description |
---|
ObjectDataCsys(TaggedObject flatSolidObjectInitial,
TaggedObject formedBodyObjectInitial)
Constructor for the ObjectDataCsys object.
|
ObjectDataGeneral(TaggedObject flatPatternObjectInitial,
TaggedObject flatSolidObjectInitial,
TaggedObject formedBodyObjectInitial)
Constructor for the ObjectDataGeneral object.
|
Modifier and Type | Interface and Description |
---|---|
interface |
BendOptions
Represents a Sheetmetal Bend Options class.
|
interface |
CornerTreatmentBuilder
The CornerTreatmentBuilder class is used to manage a builder object for
a corner treatment in the flat solid and flat pattern dialogs.
|
interface |
ExportFlatPatternBuilder
Represents a Export flat pattern builder.
|
interface |
FlexibleCableSegment
Represents a Flexible Cable Segment class.
|
interface |
MiterOptions
Represents a Miter Data Options builder.
|
interface |
SMBoundaryConditionBuilder
Represents a Boundary condition object for Metaform.
|
interface |
SMBoundaryConditionBuilderList
Represents a list of objects.
|
Modifier and Type | Interface and Description |
---|---|
interface |
AnchorPoint
Represents a
AnchorPoint builder. |
interface |
AnchorPointList
Represents a list of objects.
|
interface |
BuiltUpBlockBuilder
|
interface |
BuiltUpManModeBuilder
This class allows you to set the NX Ship BuiltUp Profile Manufacturing Mode for
one or more components.
|
interface |
BuiltUpOffsetBuilder
Represents a
BuiltUpOffsetBuilder .This class is for splitting ship built-up solidbodies
Created in NX9.0.0 |
interface |
BulkHeadListItemBuilder
|
interface |
BulkHeadListItemBuilderList
Represents a list of objects.
|
interface |
CompareModeBuilder
This class is used to compare between the two Shipbuilding modes of Design and Manufacturing.
|
interface |
CopyObjectsBuilder
Represents a
CopyObjectsBuilder
It is used in Ship Building Application. |
interface |
CornerCutListItemBuilder
Used to supply the list of corner cut locations and seam curves to the
CornerCutBuilder
To create a new instance of this class, use ShipCollection.createCornerCutListitemBuilder() Created in NX8.5.0 |
interface |
CornerCutListItemBuilderList
Represents a list of objects.
|
interface |
DeckListItemBuilder
Represents a DeckListItemBuilder.
|
interface |
DeckListItemBuilderList
Represents a list of objects.
|
interface |
DisplaySolidBuilder
This class is used to identify ship structure that is to have a temporary
solid display built for it.
|
interface |
DrawingTemplateBuilder
Represents a drawing template selection block .
|
interface |
EditContextAttributesBuilder
Represents the class Features.ShipDesign.EditContextAttributesBuilder which is used to
edit the context attributes on the basic design features.
|
interface |
ExpansionDrawingBuilder
Represents a
ExpansionDrawingBuilder . |
interface |
FeaturesBatchOperationBuilder
Use this to cycle through the assembly components and perform the operation globally on the specified feature type.
|
interface |
FeaturesToTagBuilder
This class is used to add an attribute to profile features that have been modified by
the user to display a 'Metal to Metal' design 'feature'.
|
interface |
FilterBuilder
A builder that allows the user to define common properties of ship objects and then
add objects of similar properties to the select object list.
|
interface |
ItFrameListItemBuilder
|
interface |
ItFrameListItemBuilderList
Represents a list of objects.
|
interface |
ManufacturingDataBuilder
This class is used to generate Manufacturing data.
|
interface |
ManufacturingStockBuilder
Represents a
ManufacturingStockBuilder builder. |
interface |
MaterialAllowanceBuilder
Represents the material allowance feature builder to examine steel feature.
|
interface |
MaterialEstimationBuilder
Represents the class Features.ShipDesign.MaterialEstimationBuilder which is used to
calculate the material estimation information.
|
interface |
MirrorShipStructureBuilder
Copy the selected parts (components) about the Mirror Plane with full model history and feature data.
|
interface |
OrientationAngleMethodsBuilder
This class defines the method of angle definition used in the definition of the region's orientation.
|
interface |
OrientationDefinitionBuilder
This class defines the top level object for use in definining the orientation
of stiffeners and edge reinforcements.
|
interface |
OrientationPointMethodsBuilder
This class is used to define the boundary of the regions when definining the orientation of a profile.
|
interface |
OrientationRegionItemBuilder
This class defines each region of the orientation.
|
interface |
OrientationRegionItemBuilderList
Represents a list of objects.
|
interface |
PenetrationAssociationBuilder
Represents a
PenetrationAssociationBuilder builder To create a new instance of this class, use PenetrationRequestCollection.createPenetrationAssociationBuilder(boolean, nxopen.features.shipdesign.PenetrationRequest) Created in NX8.0.0 |
interface |
PenetrationAttachment
Represents the Penetration Attachment object.
|
interface |
PenetrationCutoutBuilder
Represents a
PenetrationRequest builder To create a new instance of this class, use PenetrationRequestCollection.createPenetrationCutoutBuilder(nxopen.features.shipdesign.PenetrationRequest) Default values. |
interface |
PenetrationFolder
Represents the Penetration Folder object.
|
interface |
PenetrationList
Represents the Penetration List object.
|
interface |
PenetrationRequest
Represents the Penetration Request object.
|
interface |
PenetrationRequestBuilder
Represents a
PenetrationRequest builder To create a new instance of this class, use PenetrationRequestCollection.createPenetrationRequestBuilder(nxopen.features.shipdesign.PenetrationRequest) Default values. |
interface |
PenetrationRequestForCutoutBuilder
Represents a
Features.ShipDesign.PenetrationRequest builder To create a new instance of this class, use PenetrationRequestCollection.createPenetrationRequestForCutoutBuilder() Created in NX8.5.0 |
interface |
PenetrationReviewRequestBuilder
Represents a
Features.ShipDesign.PenetrationRequest builder To create a new instance of this class, use PenetrationRequestCollection.createPenetrationReviewRequestBuilder(nxopen.features.shipdesign.PenetrationRequest[]) Created in NX8.0.0 |
interface |
PenetrationSite
Represents the Penetration Site object.
|
interface |
PlaneListBuilder
This class is used to place a plane into a list.
|
interface |
PlaneListBuilderList
Represents a list of objects.
|
interface |
PlanePairBuilder
This class is used to define a pair of planes in a list.
|
interface |
PlateStockBuilder
This builder allows you to define the stock information for plate system features in ship design.
|
interface |
PointPairBuilder
This class is used to define a pair of points in a list.
|
interface |
QualifySketchBuilder
Represents a
QualifySketchBuilder builder. |
interface |
ReadDataSetBuilder
This class will read a data set file from Team Center .
|
interface |
RebaseBuilder
This class is used to synchronize the end cuts from the ones in mfg group to design group.
|
interface |
RemoveSplitBuilder
Represents a
RemoveSplitBuilder .This class is for removing split features. |
interface |
SeamBlockBuilder
Represents a
SeamBlockBuilder
To create a new instance of this class, use BuiltUpBlockBuilder.createSeamBlockBuilder() Created in NX9.0.0 |
interface |
SeamBlockBuilderList
Represents a list of objects.
|
interface |
SectionDrawingBuilder
This builder allows you to define the section drawing information.
|
interface |
SectionViewBuilderList
Represents a list of objects.
|
interface |
SetModeBuilder
This class is used to set the mode to design or manufacturing.
|
interface |
ShipAttributeHolder
Represents a
ShipAttributeHolder builder
This is an abstract class. |
interface |
ShipContainerBuilder
This class is used to specify the "container" part for the Ship Structures application, i.e., that
part that should have newly created Ship Stiffeners, Plates, Standard Parts added to it as assembly
components.
|
interface |
ShipCoordinatesBuilder
Represents a
ShipCoordinates builder
To create a new instance of this class, use ShipCollection.createShipCoordinatesBuilder() Default values. |
interface |
ShipDesignVersionUpBuilder
Represents a
ShipDesignVersionUpBuilder builder. |
interface |
ShipFeatureConverter
This class is used to convert/upgrade legacy Ship Design features.
|
interface |
ShipNameFieldBuilder
A field, combined with other fields, to generate a name for a Ship Basic Design Object such as a Deck.
|
interface |
ShipNamesBuilder
This class provides the mechanism for defining the names of Basic Design objects
such as Decks, Bulkheads, Stiffener Systems, etc.
|
interface |
ShipNamesBuilderList
Represents a list of objects.
|
interface |
ShipNamesListBuilder
This class provides a list of
ShipNamesBuilder objects. |
interface |
ShipTrimBodyBuilder
Represents a
ShipTrimBodyBuilder . |
interface |
SplitProfilePlateBuilder
Represents a
SplitProfilePlateBuilder .This class is for splitting ship profile/plate solidbodies
To create a new instance of this class, use ShipCollection.createSplitProfilePlateBuilder() Default values. |
interface |
SplitStandardPartBuilder
Represents a
SplitStandardPartBuilder .This class is for splitting ship standard part
To create a new instance of this class, use ShipCollection.createSplitStandardPartBuilder(nxopen.features.shipdesign.SplitStandardPart) Default values. |
interface |
StandardPartFrameworkBuilder
Represents the standard part framework builder to add or edit ship standard part.
|
interface |
StandardPartItemBuilder
Represents the ship standard part item builder.
|
interface |
StandardPartItemBuilderList
Represents a list of objects.
|
interface |
SteelInsulationBoundaryBuilder
Represents a Steel Insulation Boundary builder.
|
interface |
SteelInsulationBoundaryBuilderList
Represents a list of objects.
|
interface |
StiffenerBySupportPathBuilder
This class defines the builder to collect stiffener by support path data for Stiffener feature.
|
interface |
StiffenerLimitBuilder
This class defines the path limit method used by a Stiffener or Edge Reinforcement feature.
|
interface |
StiffenerStockBuilder
This class defines the Profile or Plate stock for a Stiffener or Edge Reinforcement feature.
|
interface |
SubSystemBuilderList
Represents a list of objects.
|
interface |
SynchronizeDesignViewBuilder
This class is used to synchronize body features from design view to manufacturing view.
|
interface |
ThicknessDirectionBuilder
This class allows you to define the thickness direction for plate system features in Ship Basic Design and
and for grid planes in Ship Concept Design.
|
interface |
TransFrameListItemBuilder
|
interface |
TransFrameListItemBuilderList
Represents a list of objects.
|
interface |
TransitionBuilder
This is to create a
TransitionBuilder which is used to create Detail Design elements from Basic Design elements. |
interface |
UnfoldedMinRecBuilder
Represents the class Features.ShipDesign.UnfoldedMinRecBuilder which is used to
calculate the unfolded minimum rectangle of ship basic design plates or standard parts.
|
interface |
VerifyPenetrationBuilder
Represents a
VerifyPenetrationBuilder builder To create a new instance of this class, use PenetrationRequestCollection.createVerifyPenetrationBuilder() Created in NX8.5.0 |
interface |
WeightAndCGBuilder
Represents the class Features.ShipDesign.WeightAndCGBuilder which is used to
calculate the weight and cg information.
|
Modifier and Type | Method and Description |
---|---|
TaggedObject |
FilterBuilder.compareObject()
Returns the object that is used to compare the property values with.
|
TaggedObject[] |
ShipCoordinatesBuilder.getPorts()
Gets ports in component.
|
Modifier and Type | Method and Description |
---|---|
void |
QualifySketchBuilder.assignAttribute(TaggedObject entity,
String category,
String title,
String value,
int attrType,
String objName)
Assigns attributes to the anchor point.
|
void |
ProfileCutoutBuilder.evaluateProfileCutoutParameters(TaggedObject tgTargetBody,
TaggedObject tgProfileBody)
Updates the parameters in profile cutout builder using parameters rules.
|
void |
QualifySketchBuilder.removeAttribute(TaggedObject entity,
String category,
String title,
int attrType)
Removes attributes from the entity.
|
void |
ProfileCutoutBuilder.resetContextEntity(TaggedObject tgTargetBody,
TaggedObject tgProfileBody)
Resets the section types acoording to the tightness attribute on the target and the context attribute on the profile
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design") . |
void |
FilterBuilder.setCompareObject(TaggedObject compareObject)
License requirements: None. |
void |
PlateSystemBuilder.setKnuckleEdges(TaggedObject[] knuckleEdges)
Sets the knuckle edges, which includes edges for both bend and split types.
|
Modifier and Type | Interface and Description |
---|---|
interface |
DisplayPropertiesBuilder
|
interface |
Field
Represents an Field abstract class.
|
interface |
FieldDomain
Represents the Field Domains.
|
interface |
FieldEvaluator
Represents a Field Evaluator which can be used to evaluate a
Field . |
interface |
FieldExpression
Represents the Field Expression class.
|
interface |
FieldFormula
Represents the Field Formula class.
|
interface |
FieldLink
Represents the Field Link class.
|
interface |
FieldManager
Represents the manager class of the Fields
This manager class gives access to all the fields Field within a part,
as well as the collection of domains FieldDomain . |
interface |
FieldReference
Represents an reference field
A Reference Field exposes data inside of an abstract data store. |
interface |
FieldVariable
Represents the Field Variables
A variable is a symbol on whose value a function, polynomial, etc., depends. |
interface |
FieldWrapper
This class defines a value that is internally backed up by a field.
|
interface |
NameVariable
This class stores the common name and measure for field variables.
|
interface |
PathObjects
Contains objects that define a lattice path
Not a KF builder; see Fields.FieldManager methods to create a Fields.PathObjects. |
interface |
PathObjectsList
Represents a list of objects.
|
interface |
ScalarFieldWrapper
This class defines a scalar value that is internally
backed up by a (optionally scaled) field or an expression.
|
interface |
SpatialMap
Represents the Field Domain Map
A Spatial Map provides a mapping from a field's independent domain into a new domain space. |
interface |
SpatialMapBuilder
|
interface |
VectorFieldWrapper
This class defines a vector value that is internally
backed up by a (optionally scaled) field or three expressions.
|
Modifier and Type | Interface and Description |
---|---|
interface |
FlipComponentBuilder
Builder for flip component operation used in formboard.
|
interface |
FormboardLayoutBuilder
Class that performs the "layout" of Formboard geometry.
|
interface |
LayoutLengthOptions
Defines the various options for determining the rounded lengths of
formboard geometry during the layout or update process.
|
interface |
ObjectAttributeReferenceBuilder
Builder for "object attribute" used in formboard which enbles user to create
annotation in drafting functionality.
|
interface |
OrientBranchBuilder
Builder for "Orient Branch" operation used in formboard.
|
interface |
ShapeSegmentBuilder
Builder for Face Annotation functionality used in formboard.
|
interface |
UpdateFormboardBuilder
Class that performs the "update" of Formboard geometry.
|
Modifier and Type | Method and Description |
---|---|
void |
ShapeSegmentBuilder.setActiveView(TaggedObject view)
Sets the active view for the shape operation.
|
Modifier and Type | Interface and Description |
---|---|
interface |
BaseExplicitOrderBuilder
This is the
BaseExplicitOrderBuilder for the explicit order This is an abstract class, and cannot be instantiated. |
interface |
CopyCutBuilder
Represents a
CopyCutBuilder
To create a new instance of this class, use ClipboardOperationsManager.createCopyCutBuilder() Created in NX7.5.0 |
interface |
ImageCaptureBuilder
Represents a
ImageCaptureBuilder builder To create a new instance of this class, use ImageCaptureManager.createImageCaptureBuilder() Default values. |
interface |
PasteBuilder
Represents a
PasteBuilder
To create a new instance of this class, use ClipboardOperationsManager.createPasteBuilder() Created in NX7.5.0 |
Modifier and Type | Interface and Description |
---|---|
interface |
AnalysisObject
Represents an Analysis Object
This is an abstract class, and cannot be instantiated . |
interface |
CurveAnalysisCombsBuilder
Deprecated.
Deprecated in NX8.5.0. Use
CurveCurvatureAnalysis .
|
interface |
CurveAnalysisInflectionsBuilder
Deprecated.
Deprecated in NX8.5.0. Use
GeometricAnalysis.CurveCurvatureAnalysis .
|
interface |
CurveAnalysisPeaksBuilder
Deprecated.
Deprecated in NX8.5.0. Use
GeometricAnalysis.CurveCurvatureAnalysis .
|
interface |
CurveContinuity
Represents a Curve Continuity Analysis builder
To create or edit an instance of this class, use CurveContinuityBuilder Created in NX7.0.0 |
interface |
CurveContinuityBuilder
Represents a curve continuity builder
To create a new instance of this class, use AnalysisObjectCollection.createCurveContinuityBuilder(nxopen.DisplayableObject) Default values. |
interface |
CurveCurvatureAnalysis
Represents a CurveCurvatureAnalysis builder
To create or edit an instance of this class, use CurveCurvatureAnalysisBuilder Created in NX7.0.0 |
interface |
CurveCurvatureAnalysisBuilder
Represents a
CurveCurvatureAnalysis builder To create a new instance of this class, use AnalysisObjectCollection.createCurveCurvatureAnalysisBuilder(nxopen.DisplayableObject) Default values. |
interface |
DeviationChecking
Represents a
DeviationChecking
To create a new instance of this class, use AnalysisManager.createDeviationCheckingObject() Created in NX6.0.0 |
interface |
DeviationGauge
Deviation Gauge analysis object class
To create or edit an instance of this class, use DeviationGaugeBuilder Created in NX6.0.0 |
interface |
DeviationGaugeBuilder
DeviationGaugeBuilder class
To create a new instance of this class, use AnalysisObjectCollection.createDeviationGaugeBuilder(nxopen.DisplayableObject) Default values. |
interface |
DraftAnalysis
Represents a Draft Analysis builder
To create or edit an instance of this class, use DraftAnalysisBuilder Created in NX8.0.0 |
interface |
DraftAnalysisBuilder
Represents a Draft Analysis builder
To create a new instance of this class, use AnalysisObjectCollection.createDraftAnalysisBuilder(nxopen.DisplayableObject) Default values. |
interface |
DupinBuilder
The Dupin Indicatrix is a tool to geometrically display the surface curvature at a specified point on a surface.
|
interface |
ExamineGeometry
Represents the Examine Geometry class
To create a new instance of this class, use AnalysisManager.createExamineGeometryObject() Created in NX5.0.0 |
interface |
FaceCurvatureAnalysis
Represents a Face Curvature Analysis builder
To create or edit an instance of this class, use FaceCurvatureAnalysisBuilder Created in NX8.0.0 |
interface |
FaceCurvatureAnalysisBuilder
Represents a
FaceCurvatureAnalysisBuilder builder. |
interface |
GapFlushness
Gap and Flushness analysis object class
To create or edit an instance of this class, use GapFlushnessBuilder Created in NX5.0.0 |
interface |
GapFlushnessBuilder
GapFlushnessBuilder class
To create a new instance of this class, use AnalysisObjectCollection.createGapFlushnessBuilder(nxopen.geometricanalysis.GapFlushness) Default values. |
interface |
GeometricProperties
Represents the Geometric Properties class.
|
interface |
HighlightLinesAnalysis
Represents a Highlight Lines Analysis object.
|
interface |
HighlightLinesAnalysisBuilder
Represents a
HighlightLinesAnalysis
builder. |
interface |
LocalRadiusAnalysis
Builder for Local Radius Analysis (formerly Dynamic Radius)
To create or edit an instance of this class, use LocalRadiusAnalysisBuilder Created in NX8.5.0 |
interface |
LocalRadiusAnalysisBuilder
Represents a
LocalRadiusAnalysis builder To create a new instance of this class, use AnalysisObjectCollection.createLocalRadiusAnalysisBuilder(nxopen.geometricanalysis.LocalRadiusAnalysis) Default values. |
interface |
SectionAnalysisObject
Represents a Section Analysis object.
|
interface |
SimpleInterference
Represents the Simple Interference object.
|
interface |
SolidDensity
Represents a
SolidDensity
To create a new instance of this class, use AnalysisManager.createSolidDensityObject() Created in NX5.0.0 |
interface |
SurfaceContinuityAnalysis
Represents a SurfaceContinuityAnalysis builder
To create or edit an instance of this class, use SurfaceContinuityAnalysisBuilder Created in NX6.0.0 |
interface |
SurfaceContinuityAnalysisBuilder
Represents a
SurfaceContinuityAnalysis builder To create a new instance of this class, use AnalysisObjectCollection.createSurfaceContinuityAnalysisBuilder(nxopen.DisplayableObject) Default values. |
interface |
SurfaceIntersection
Represents a SurfaceIntersection builder
To create or edit an instance of this class, use SurfaceIntersectionBuilder Created in NX7.5.0 |
interface |
SurfaceIntersectionBuilder
Represents a
SurfaceIntersection builder To create a new instance of this class, use AnalysisObjectCollection.createSurfaceIntersectionBuilder(nxopen.DisplayableObject) Default values. |
Modifier and Type | Interface and Description |
---|---|
interface |
CircularGridBuilder
Represents the circular grid section specifications for a
SectionAnalysisBuilder . |
interface |
CurveAlignedBuilder
Represents the Curve Aligned specification for a
SectionAnalysisExBuilder . |
interface |
GridSpacingBuilder
Represents the grid spacing for certain types of section specifications for
the
SectionAnalysisBuilder . |
interface |
InteractiveBuilder
Represents the Interactive specification for a
SectionAnalysisExBuilder . |
interface |
IsoparametricBuilder
Represents the Isoparametric specification for a
GeometricAnalysis.SectionAnalysis.SectionAnalysisExBuilder . |
interface |
ParallelPlanesExBuilder
Represents the Parallel Plane specification for a
GeometricAnalysis.SectionAnalysis.SectionAnalysisExBuilder . |
interface |
QuadrilateralGridBuilder
Represents the quadrilateral grid section specifications for a
GeometricAnalysis.SectionAnalysis.SectionAnalysisBuilder . |
interface |
RadialBuilder
Represents the Radial specification for a
GeometricAnalysis.SectionAnalysis.SectionAnalysisExBuilder . |
interface |
SectionAnalysisBuilder
Represents a
nxopen.geometricanalysis.sectionanalysisObject builder. |
interface |
SectionAnalysisExBuilder
Represents a
SectionAnalysisExObject builder To create a new instance of this class, use AnalysisObjectCollection.createSectionAnalysisExBuilder(nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExObject) Default values. |
interface |
SectionAnalysisExObject
Represents a Section Analysis Object of the new version.
|
interface |
SectionPlaneBuilder
Represents a plane which is used to cut sections on faces or facet bodies .
|
interface |
TriangularGridBuilder
Represents the triangular grid section specifications for a SectionAnalysisBuilder.
|
interface |
XYZPlaneBuilder
Represents the XYZ Plane specification for a
GeometricAnalysis.SectionAnalysis.SectionAnalysisExBuilder . |
Modifier and Type | Interface and Description |
---|---|
interface |
AlignmentMethodBuilder
|
interface |
AlongPathPattern
the AlongPath pattern definition.
|
interface |
AlongSpineBuilder
|
interface |
AnchorLocatorBuilder
|
interface |
AngularLimits
Represents a angular limts data.
|
interface |
AngularPatternSpacing
defines the various ways pattern instances can be
spaced within the pattern, particularly in the context of the
PatternDefinition class.
|
interface |
BetweenLocationsData
|
interface |
BlendLimitsData
|
interface |
BlendSetbackBuilder
This class provides ability to define a setback curve on a blend face.
|
interface |
BlendSetbackBuilderList
Represents a list of objects.
|
interface |
BlendStopshortBuilder
|
interface |
BooleanOperation
Represents a boolean operation .
|
interface |
BooleanRegionSelect
a class which defines boolean region select.
|
interface |
BooleanToolBuilder
a class which defines boolean tool builder.
|
interface |
BoundaryDefinitionBuilder
Represents a
BoundaryDefinitionBuilder . |
interface |
BoundaryDefinitionBuilderList
Represents a list of objects.
|
interface |
BoundingObjectBuilder
|
interface |
BoundingObjectBuilderList
Represents a list of objects.
|
interface |
BridgeCurveConnectivity
Data offering connectivity controls for
BridgeCurveBuilderEx . |
interface |
CircularCrossSection
Represents a circular section data for face blend.
|
interface |
CircularFrameBuilder
|
interface |
CircularPattern
the circular pattern definition.
|
interface |
ColorCodedRegionBuilder
Represents a
ColorCodedRegionBuilder . |
interface |
CombOptionsBuilder
|
interface |
ConicCrossSection
Represents a conic section data for face blend.
|
interface |
Continuity
Represents a
Continuity
Allows user to specify continuity constraint surface construction. |
interface |
ControlPoleManagerData
This class manages the control poles for a set of surfaces or curves.
|
interface |
ConvertFeatureGroupsToModulesBuilder
Represents a
ConvertFeatureGroupsToModulesBuilder builder To create a new instance of this class, use FeatureCollection.createConvertFeatureGroupsToModulesBuilder() Created in NX9.0.0 |
interface |
CurveExtendData
|
interface |
CurveExtensionBuilder
Spline extension builder class.
|
interface |
CurveFitData
Represents the curve fitting methods options.
|
interface |
CurveFitJoin
Represents the curve fit join data
.
|
interface |
CurveFitOptions
Represents the curve fit data
.
|
interface |
CurveLengthData
Represents an CurveLength data.
|
interface |
CurveLimitsData
|
interface |
CurveOptions
Represents the curve options data
.
|
interface |
CurveRangeBuilder
Represents the curve range and anchor builder .
|
interface |
CurveShapingBuilder
Represents a
CurveShapingBuilder . |
interface |
DegreesAndSegmentsOrPatchesBuilder
the DegreesAndSegmentsOrPatches builder .
|
interface |
DepthSkewBuilder
This class provides ability to specify a depth and a skew value.
|
interface |
DisplayResolutionBuilder
Represents a
DisplayResolutionBuilder . |
interface |
DistancePatternSpacing
defines the various ways pattern instances can be
spaced within the pattern, particularly in the context of the
PatternDefinition class.
|
interface |
DraftPointData
Represents a draft point data object
To create an instance of this class, see DraftPointDataCollection.createDraftPointData(nxopen.Point, java.lang.String) Created in NX4.0.0 |
interface |
DraftVariableAngleData
Represents data containing variable angle draft point data objects
This class will not be created by the user. |
interface |
EndHoleData
|
interface |
EntityUsageInfo
Represents a
EntityUsageInfo . |
interface |
EntityUsageInfoList
Represents a list of objects.
|
interface |
Extend
Represents an extend data.
|
interface |
ExtrudeRevolveToolBuilder
a class which is a sub-component of BooleanTool.
|
interface |
FacePlaneSelectionBuilder
|
interface |
FacePlaneToolBuilder
a sub-component of BooleanToolBuilder.
|
interface |
FaceSetData
|
interface |
FaceSetOffset
This class represents a face set (collector) offset data.
|
interface |
FaceSetOffsetList
Represents a list of objects.
|
interface |
FeatureOffset
Represents a Offset .
|
interface |
FeatureOptions
Represents various options supported on features.
|
interface |
FrameOnPathBuilder
Frame on path builder .
|
interface |
FtmFixedCurvesBuilder
Represents a
FtmFixedCurvesBuilder builder
To create a new instance of this class, use OmnicadManager.createFtmFixedCurvesBuilder() Default values. |
interface |
FtmFixedCurvesBuilderList
Represents a list of objects.
|
interface |
FtmTransformCurvesBuilder
Represents a
FtmTransformCurvesBuilder builder
To create a new instance of this class, use OmnicadManager.createFtmTransformCurvesBuilder() Default values. |
interface |
FtmTransformCurvesBuilderList
Represents a list of objects.
|
interface |
FtmTransformPointsBuilder
Represents a
FtmTransformPointsBuilder builder
To create a new instance of this class, use OmnicadManager.createFtmTransformPointsBuilder() Created in NX10.0.0 |
interface |
FtmTransformPointsBuilderList
Represents a list of objects.
|
interface |
GeneralPattern
the General pattern definition.
|
interface |
GeometryLocationData
Represents a
GeometryLocationData
To create a new instance of this class, use GeometryLocationDataCollection.createGeometryLocationData() Created in NX5.0.0 |
interface |
HelixPattern
the Helix pattern definition.
|
interface |
HorizontalReference
the horizontal reference vector definition.
|
interface |
InstanceEditedExpressionItem
edited value of one master expression of the input object(s) being patterned.
|
interface |
InstanceEditedExpressionItemList
Represents a list of objects.
|
interface |
InstanceEditedExpressionsList
list of
InstanceEditedExpressionItem objects. |
interface |
InteractiveSectionBuilder
Represents a
InteractiveSectionBuilder . |
interface |
LawBuilder
Represents a LawBuilder .
|
interface |
Limits
Represents a limits data.
|
interface |
LinearLimits
Represents a limits data.
|
interface |
LocalUntrimBuilder
Represents a
LocalUntrimBuilder builder. |
interface |
MatchSurfaceBuilder
Represents a
MatchSurfaceBuilder builder.This builder's Commit can create a b-surface To create a new instance of this class, use CAMDataPrepManager.createMatchSurfaceBuilder() Default values. |
interface |
MiddleHoleData
|
interface |
MirrorPattern
the Mirror pattern definition.
|
interface |
ModlAlongCurveAngle
|
interface |
ModlDistanceAngle
|
interface |
ModlMotion
|
interface |
MovePoleBuilder
This class manages the control poles movements for a surface or curve.
|
interface |
MultiDraft
Represents a multi-draft.
|
interface |
MultiTransitionLawBuilder
Represents multiple transition law.
|
interface |
NestModuleBuilder
Deprecated.
Deprecated in NX10.0.0. Use
FeatureCollection instead.
|
interface |
NonInflectingLawBuilder
Represents a non-inflecting law.
|
interface |
OnPathDimensionBuilder
Builds an on-path dimension .
|
interface |
OnPathDimWithValueBuilder
|
interface |
OnPathDistancePatternSpacing
defines the various ways pattern instances can be
spaced within the pattern, particularly in the context of the
PatternDefinition class.
|
interface |
OrientationMethodBuilder
|
interface |
OrientXpressBuilder
Represent the OrientXpress block
OrientXpress is not supported in KF. |
interface |
ParentEquivalencyMap
Represents a
ParentEquivalencyMap . |
interface |
ParentEquivalencyMapList
Represents a list of objects.
|
interface |
PartModuleInputBuilder
Represents a
PartModuleInputBuilder To create a new instance of this class, use PartModule.createPartModuleInputBuilder() Default values. |
interface |
PartModuleOutputBuilder
Represents a
PartModuleOutputBuilder To create a new instance of this class, use PartModule.createPartModuleOutputBuilder() Created in NX8.0.0 |
interface |
PartModuleOutputBuilder1
Represents a
PartModuleOutputBuilder1 To create a new instance of this class, use PartModule.createPartModuleOutputBuilder1() Default values. |
interface |
PartModuleReferencesBuilder
|
interface |
PartModuleRelationshipBuilder
Represents a
Features.PartModule builder To create a new instance of this class, use FeatureCollection.createPartModuleRelationshipBuilder(nxopen.features.PartModule) Created in NX8.0.0 |
interface |
PathLimits
Represents a path limits data.
|
interface |
PatternClocking
Deprecated.
Deprecated in NX8.0.0. This functionality is no longer supported.
|
interface |
PatternClockingBuilder
enables the ability to apply delta transforms on individual instances of a pattern within the pattern feature
To create a new instance of this class, use PatternDefinition.createClockingBuilder(int, int) Default values. |
interface |
PatternDefinition
pattern spacing for several pattern based commands.
|
interface |
PatternFill
the pattern fill definition.
|
interface |
PatternIncrementItem
variational for one master expression of the input object(s) being patterned.
|
interface |
PatternIncrementItemList
Represents a list of objects.
|
interface |
PatternIncrementsBuilder
pattern increments builder .
|
interface |
PatternIncrementsList
list of
PatternIncrementItem objects. |
interface |
PatternInstanceEditBuilder
pattern instance edit builder
To create a new instance of this class, use PatternDefinition.createPatternInstanceEditBuilder() Created in NX7.5.0 |
interface |
PatternOrientation
the pattern orientation definition.
|
interface |
PatternReferencePointServiceBuilder
Pattern Reference Point is a service which enables the employing client to compute the reference point for pattern instance locations.
|
interface |
PatternSpacing
defines the various ways pattern instances can be
spaced within the pattern, particularly in the context of the
PatternDefinition class.
|
interface |
PatternSpacingsList
list of
PatternSpacingsListItem objects. |
interface |
PatternSpacingsListItem
one pattern spacing in the spacings list
To create a new instance of this class, use PatternSpacingsList.createPatternSpacingsListItem() Created in NX8.0.0 |
interface |
PatternSpacingsListItemList
Represents a list of objects.
|
interface |
PointSetAlignmentBuilder
This class performs a point set to point set alignment
To create a new instance of this class, use Part.createPointSetAlignmentBuilder() Default values. |
interface |
PointsFromFileBuilder
Represents a
PointsFromFileBuilder builder
read points from a text file with format *.asc, *.txt, *.dat, *.pts
To create a new instance of this class, use Part.createPointsFromFileBuilder() Created in NX8.5.0 |
interface |
PolygonPattern
the polygon pattern definition.
|
interface |
PolygonPatternSpacing
defines the various ways pattern instances can be
spaced within the pattern, particularly in the context of the
PatternDefinition class.
|
interface |
ProjectionOptions
Represents a ProjectionOptions .
|
interface |
QuadrilateralFrameBuilder
|
interface |
Rebuild
Represents a
Rebuild . |
interface |
RectangularFrameBuilder
Rectangular frame builder .
|
interface |
RectangularPattern
the rectangular pattern definition.
|
interface |
ReduceSurfaceRadiusBuilder
Reduce Surface Radius Builder of Geometric Utilities.
|
interface |
ReduceSurfaceRadiusFaceGroupBuilderList
Represents a list of objects.
|
interface |
ReferencePattern
the reference pattern definition.
|
interface |
RefitControlBuilder
This class is used to specify the parameter set to refit faces .
|
interface |
RegionTracker
a class which collects all the geometric entities used to identify a region of faces during a boolean feature.
|
interface |
RenameLinkedPartModulePartBuilder
Represents a
Features.PartModule builder To create a new instance of this class, use FeatureCollection.createRenameLinkedPartModulePartBuilder() Created in NX9.0.0 |
interface |
ReplAsstBuilder
Represents a
ReplAsstBuilder . |
interface |
RotationSetBuilder
|
interface |
RotationSetBuilderList
Represents a list of objects.
|
interface |
SaveConstraintsBuilder
Represents a builder for a Save Constraints.
|
interface |
ScalingMethodBuilder
|
interface |
ScalingSetBuilder
|
interface |
ScalingSetBuilderList
Represents a list of objects.
|
interface |
SecondarySectionData
|
interface |
SectionPlaneData
Represents a Section Plane Data class
This class acts like a container to hold the data needed to create a plane.
|
interface |
SelectDividingObjectBuilder
Represents the dividing tool block for dividing face .
|
interface |
SelectionList
Represents a
SelectionList To create a new instance of this class, use Part.createSelectionList() Created in NX8.0.0 |
interface |
SelectionListList
Represents a list of objects.
|
interface |
ShapeFrameBuilder
|
interface |
SimpleDraft
Represents an Offset .
|
interface |
SmartVolumeProfileBuilder
This class contains the options for automatically closing the profile to surrounding model geometry.
|
interface |
SnipIntoPatchesBuilder
Represents a
SnipIntoPatchesBuilder builder. |
interface |
SpineDefinitionBuilder
Provides a spine definition for modeling operations .
|
interface |
SpinePointData
Represents a spine point def object
To create an instance of this class, see nxopen.geometricutilities Created in NX5.0.0 |
interface |
SpiralPattern
the Spiral pattern definition.
|
interface |
SplineExtensionBuilder
Spline extension builder class.
|
interface |
SShapedLawBuilder
Represents a s-shaped law.
|
interface |
StartHoleData
|
interface |
StepOptionBehavior
Represents a
StepOptionBehavior
It provides several step options for controlling behavior when
move face and so on. |
interface |
StyledSweepDoubleOnPathDimBuilder
|
interface |
StyledSweepDoubleOnPathDimBuilderList
Represents a list of objects.
|
interface |
StyledSweepReferenceMethodBuilder
|
interface |
SupportPlaneData
|
interface |
SurfaceRangeBuilder
Represents the surface range and anchor builder .
|
interface |
TangentMagnitudeBuilder
This class provides ability to specify the start and end
tangent magnitude values.
|
interface |
TransformerData
Transformation and orientation tool.
|
interface |
TransitionCurveBuilder
This class provides ability to create a transition(bridge) curve between two adjacent setback curves.
|
interface |
TransitionCurveBuilderList
Represents a list of objects.
|
interface |
TransitionLawNodeBuilderList
Represents a list of objects.
|
interface |
TriangularFrameBuilder
|
interface |
TwoExpressionsCollectorSet
Represents a two dimension list item builder
To create a new instance of this class, use Part.createEmptyTwoExpressionsCollectorSet() Created in NX8.5.0 |
interface |
TwoExpressionsCollectorSetList
Represents a list of objects.
|
interface |
TwoExpressionsSectionSet
Represents a two dimension list section item builder
To create a new instance of this class, use Part.createEmptyTwoExpressionsSectionSet() Created in NX9.0.0 |
interface |
TwoExpressionsSectionSetList
Represents a list of objects.
|
interface |
UnnestModuleBuilder
Deprecated.
Deprecated in NX10.0.0. Use
FeatureCollection instead.
|
interface |
WaveLinkRepository
Represents a
WaveLinkRepository . |
Modifier and Type | Method and Description |
---|---|
void |
BooleanRegionSelect.assignTargets(TaggedObject[] targets)
Assigns the targets to be used for region selection
License requirements: solid_modeling ("SOLIDS MODELING") . |
Modifier and Type | Interface and Description |
---|---|
interface |
IssueAttachment
Represents the Issue Attachment object.
|
interface |
IssueBriefcase
Represents the Issue Briefcase object.
|
interface |
IssueBriefcaseSynchronizeBuilder
Represents a
IssueBriefcase synchronize builder To create a new instance of this class, use IssueBriefcase.createSynchronizeContentBuilder() Created in NX10.0.0 |
interface |
IssueContent
Represents the Issue Issue object.
|
interface |
IssueContentBuilder
Represents a
IssueContent builder To create a new instance of this class, use IssueManager.createIssueContentBuilder(nxopen.issue.IssueContent) Default values. |
interface |
IssueFolder
Represents the Issue Folder object.
|
interface |
IssueList
Represents the Issue List object.
|
interface |
IssueProperty
Represents the Issue Property object.
|
interface |
IssueSite
Represents the Issue Site object.
|
interface |
SnapshotSubsetBuilder
Used to create or edit issue snapshot subset.
|
interface |
SnapshotWorksetBuilder
Used to create or edit issue snapshot workset which is a container to hold all the corresponding
parts to represent an issue.
|
Modifier and Type | Interface and Description |
---|---|
interface |
Category
Represents a layer category.
|
Modifier and Type | Interface and Description |
---|---|
interface |
AssemblyCreationSettingsBuilder
|
interface |
AssemblyFromLayout2dBuilder
Represents a Builder for create assembly from Layout functionality which will create a
new assembly from the selected Layout
To create a new instance of this class, use ComponentCollection.createAssemblyFromLayout2dBuilder() Created in NX10.0.0 |
interface |
ComponentDefinition
Represents a component definition.
|
interface |
ComponentNameBuilder
This class is used to construct the component name and part file name block, if it is in
manage mode, we also have item number, item revision and item name .
|
interface |
ComponentSettingsBlockBuilder
Represents the Component Settings Button (Layout2d.ComponentSettingsBlockBuilder)
Created in NX10.0.0 |
interface |
ComponentSettingsBuilder
Represents a
ComponentSettingsBuilder
This builder stores the information of the 2D Component settings
Created in NX10.0.0 |
interface |
DefineComponentAnchorPointBuilder
Represents a Builder for Define Component Anchor Point functionality which will define the anchor
point location of a 2D Component instance
To create a new instance of this class, use ComponentCollection.createDefineComponentAnchorPointBuilder() Created in NX10.0.0 |
interface |
DefineComponentBuilder
Represents a Builder for Define 2D component functionality which will define
a 2D Component and stores its definition in the Reuse Library
To create a new instance of this class, use ComponentCollection.createDefineComponentBuilder(nxopen.layout2d.Component) Default values. |
interface |
EditComponentSettingsBuilder
Represents a
EditComponentSettingsBuilder builder. |
interface |
InsertComponentBuilder
Represents a Builder for Insert Component functionality which will insert a 2D
Component instance in the active sketch
To create a new instance of this class, use ComponentCollection.createInsertComponentBuilder() Created in NX10.0.0 |
interface |
LocalDefinitionFolder
Represents a local definition folder.
|
interface |
LocalDefinitionFolderBuilder
Represents a
LocalDefinitionFolderBuilder . |
interface |
MakeComponentUniqueBuilder
Represents a Builder for Make 2D Component unique functionality which will create a
new definition of the selected 2D Component instance
To create a new instance of this class, use ComponentCollection.createMakeComponentUniqueBuilder() Default values. |
interface |
NewComponentBuilder
Represents a Builder for New 2D Component functionality which will create an empty 2D Component
instance and stores its definition in the local 2D Component folder
To create a new instance of this class, use ComponentCollection.createNewComponentBuilder() Created in NX10.0.0 |
interface |
PublishComponentBuilder
Represents a Builder for Publish 2D Component functionality which will allow
local definitions to be exported into external storage locations
To create a new instance of this class, use ComponentCollection.createPublishComponentBuilder() Created in NX10.0.0 |
interface |
SmashComponentBuilder
Represents a Builder for Smash 2D Component functionality which will break instances
of 2D Components into its constituent pieces, we can have multiple committed objects
To create a new instance of this class, use ComponentCollection.createSmashComponentBuilder() Created in NX10.0.0 |
Modifier and Type | Interface and Description |
---|---|
interface |
Circle
Represents a
nxopen.Markup.Circle
To create a new instance of this class, use nxopen.Markup.MarkupFileObjectCollection#createCircle Created in NX10.0.0 NX_REMOVE_FROM_JAVA_API |
interface |
EditObjectDisplayBuilder
The
nxopen.Markup.EditObjectDisplayBuilder is used to edit display settings of the markup objects. |
interface |
File
Represents a
nxopen.Markup.File
To create a new instance of this class, use nxopen.Markup.MarkupFileCollection#createFile Created in NX10.0.0 NX_REMOVE_FROM_JAVA_API |
interface |
Freehand
Represents a
nxopen.Markup.Freehand
To create a new instance of this class, use nxopen.Markup.MarkupFileObjectCollection#createFreehand Created in NX10.0.0 NX_REMOVE_FROM_JAVA_API |
interface |
Icon
Represents a
nxopen.Markup.Icon
To create a new instance of this class, use nxopen.Markup.MarkupFileObjectCollection#createIcon Created in NX10.0.0 NX_REMOVE_FROM_JAVA_API |
interface |
MarkupObject
Represents a
nxopen.Markup.MarkupObject on the screen. |
interface |
Rectangle
Represents a
nxopen.Markup.Rectangle
To create a new instance of this class, use nxopen.Markup.MarkupFileObjectCollection#createRectangle Created in NX10.0.0 NX_REMOVE_FROM_JAVA_API |
interface |
Text
Represents a
nxopen.Markup.Text
To create a new instance of this class, use nxopen.Markup.MarkupFileObjectCollection#createText Created in NX10.0.0 NX_REMOVE_FROM_JAVA_API |
Modifier and Type | Method and Description |
---|---|
void |
MarkupFileObjectCollection.deleteObjects(TaggedObject[] objects)
Deletes a list of
nxopen.Markup.MarkupObject
License requirements: None. |
Modifier and Type | Interface and Description |
---|---|
interface |
AdapterFormula
Represents the Adapter Formula class.
|
interface |
AdapterFormulaBuilder
Represents a
AdapterFormulaBuilder . |
interface |
AdapterSignal
Represents the Adapter Signal class.
|
interface |
AdapterSignalBuilder
Represents a
AdapterSignalBuilder . |
interface |
AddComponentBuilder
Represents a
AddComponentBuilder To create a new instance of this class, use FunctionObjectCollection.createAddComponentBuilder() Created in NX7.5.1 |
interface |
AngularLimitJoint
Represents the Angular Limit Joint.
|
interface |
AngularLimitJointBuilder
Represents a
AngularLimitJoint builder. |
interface |
AngularSpringJoint
Represents the Angular Spring Joint.
|
interface |
AngularSpringJointBuilder
Represents a
AngularSpringJoint builder. |
interface |
BallJoint
Represents the Ball Joint.
|
interface |
BallJointBuilder
Represents a
BallJoint builder. |
interface |
BreakingConstraint
Represents the Breaking Constraint.
|
interface |
BreakingConstraintBuilder
Represents a
BreakingConstraint builder. |
interface |
Cam
Represents the Cam Constraint.
|
interface |
CamBuilder
Represents a
Cam builder. |
interface |
CamProfile
Represents the CamProfile class.
|
interface |
CamProfileBuilder
Represents a
CamProfile builder. |
interface |
ChangeMaterial
Represents the Change material constraint.
|
interface |
ChangeMaterialBuilder
Represents a
ChangeMaterial builder. |
interface |
ChangeOwnerBuilder
Represents a
ChangeOwnerBuilder . |
interface |
CollisionBody
Represents the Collision Body class.
|
interface |
CollisionMaterial
Represents the Collision Material class.
|
interface |
CollisionMaterialBuilder
Represents a
CollisionMaterial builder. |
interface |
CollisionSensor
Represents the Collision Sensor.
|
interface |
ConvertFromMTBBuilder
Represents a
ConvertFromMTBBuilder To create a new instance of this class, use PhysicsManager.createConvertFromMtbbuilder() Created in NX9.0.0 |
interface |
Coupling
Represents the mechatronics coupling class.
|
interface |
CouplingBuilder
This is an abstract class, and cannot be created.
|
interface |
CurveOnCurveJoint
Represents the CurveOnCurve Joint.
|
interface |
CurveOnCurveJointBuilder
Represents a
CurveOnCurveJoint builder To create a new instance of this class, use CurveOnCurveJointCollection.createCurveOnCurveJointBuilder(nxopen.mechatronics.CurveOnCurveJoint) Default values. |
interface |
CylindricalJoint
Represents the Cylindrical Joint.
|
interface |
CylindricalJointBuilder
Represents a
CylindricalJoint builder. |
interface |
DependencyCreatorBuilder
Represents a
DependencyCreatorBuilder builder. |
interface |
DisplayChanger
Represents the Display Changer which is used to change the display properties (Color, Translucency, and Visibility)
of rigid body during simulation.
|
interface |
DisplayChangerBuilder
Represents a
DisplayChanger builder. |
interface |
ElectricalPart
Electrical Part holds the part attributes for communicating
with EPLAN.
|
interface |
ElectricalPartBuilder
Represents a
ElectricalPart builder To create a new instance of this class, use ElectricalPartCollection.createElectricalPartBuilder(nxopen.mechatronics.ElectricalPart) Created in NX9.0.0 |
interface |
ExternalConnectionElement
Represents the External Connection Element class.
|
interface |
ExternalConnectionElementBuilder
Represents a
ExternalConnectionElementBuilder builder To create a new instance of this class, use nxopen.mechatronics.ExternalConnectionCollection#createExternalConnectionElementBuilder Created in NX8.0.1 |
interface |
ExternalConnectionElementBuilderList
Represents a list of objects.
|
interface |
FixedJoint
Represents the Fixed Joint.
|
interface |
FixedJointBuilder
Represents a
FixedJoint builder. |
interface |
FunctionObject
Represents the Function object.
|
interface |
FunctionObjectBuilder
Represents a
FunctionObjectBuilder To create a new instance of this class, use FunctionObjectCollection.createFunctionObjectBuilder(nxopen.mechatronics.FunctionObject) Created in NX7.5.1 |
interface |
GanttExportPLCopenBuilder
Represents a
GanttOperationObject builder To create a new instance of this class, use GanttCollection.createGanttExportPlcopenBuilder(nxopen.mechatronics.GanttOperationObject) Default values. |
interface |
GanttLinker
Represents the Gantt Linker class.
|
interface |
GanttLinkerBuilder
Represents a
GanttLinkerBuilder To create a new instance of this class, use GanttLinkerCollection.createGanttLinkerBuilder(nxopen.mechatronics.GanttLinker) Created in NX10.0.0 |
interface |
GanttOperationBuilder
Represents a
GanttOperationBuilder builder To create a new instance of this class, use GanttCollection.createGanttOperationBuilder(nxopen.mechatronics.GanttOperationObject) Created in NX7.5.1 |
interface |
GanttOperationConditionBuilder
Represents a
GanttOperationConditionBuilder To create a new instance of this class, use GanttCollection.createGanttOperationConditionBuilder() Created in NX7.5.1 |
interface |
GanttOperationConditionBuilderList
Represents a list of objects.
|
interface |
GanttOperationObject
Represents the Gantt Operation object.
|
interface |
GanttOperationParameterBuilder
Represents a
GanttOperationParameterBuilder To create a new instance of this class, use GanttCollection.createGanttOperationParameterBuilder() Created in NX7.5.1 |
interface |
GanttOperationParameterBuilderList
Represents a list of objects.
|
interface |
Gear
Represents the Gear.
|
interface |
GearBuilder
Represents a
Gear builder. |
interface |
GraphControl
Represents the Graph Control.
|
interface |
GraphControlBuilder
Represents a
GraphControl builder To create a new instance of this class, use GraphControlCollection.createGraphControlBuilder(nxopen.mechatronics.GraphControl) Created in NX8.0.0 |
interface |
HingeJoint
Represents the Hinge Joint.
|
interface |
HingeJointBuilder
Represents a
HingeJoint builder. |
interface |
LinearLimitJoint
Represents the Linear Limit Joint.
|
interface |
LinearLimitJointBuilder
Represents a
LinearLimitJoint builder. |
interface |
LinearSpringJoint
Represents the Linear Spring Joint.
|
interface |
LinearSpringJointBuilder
Represents a
LinearSpringJoint builder. |
interface |
LogicObject
Represents the Logic Object class.
|
interface |
LogicObjectBuilder
Represents a
LogicObject builder To create a new instance of this class, use LogicObjectCollection.createLogicObjectBuilder(nxopen.mechatronics.LogicObject) Created in NX8.5.0 |
interface |
MotionProfile
Represents the MotionProfile class.
|
interface |
MotionProfileBuilder
Represents a
MotionProfile builder. |
interface |
ObjectInformationBuilder
Represents a
ObjectInformationBuilder This is a sub-builder class and cannot be directly instantiated Created in NX8.5.0 |
interface |
ObjectSink
Represents the Object Sink.
|
interface |
ObjectSinkBuilder
Represents a
ObjectSink builder. |
interface |
ObjectSource
Represents the Object Source.
|
interface |
ObjectSourceBuilder
Represents a
ObjectSource builder. |
interface |
ObjectTransformer
Represents the Object Transformer.
|
interface |
ObjectTransformerBuilder
Represents a
ObjectTransformer builder. |
interface |
OPCClientBuilder
Represents a
OPCClientBuilder To create a new instance of this class, use PhysicsManager.createOpcclientBuilder() Created in NX8.0.0 |
interface |
ParameterStockBuilder
Represents a
ParameterStockBuilder builder. |
interface |
PathConstraintFrameBuilder
Represents a frame that constrains the orientation along the path curve.
|
interface |
PathConstraintFrameBuilderList
Represents a list of objects.
|
interface |
PathConstraintJoint
Represents the Path Constraint Joint class.
|
interface |
PathConstraintJointBuilder
Represents a
PathConstraintJoint builder. |
interface |
PhysicsConstraint
Represents the mechatronics constraint class.
|
interface |
PhysicsConstraintBuilder
This is an abstract class, and cannot be created.
|
interface |
PhysicsJoint
Represents the mechatronics joint class.
|
interface |
PhysicsJointBuilder
Represents a base builder for Physics Joints.
|
interface |
PhysicsPreference
Represents the Physics Preference class.
|
interface |
PMNavFolderLocator
Represents the PMNav Folder Locator.
|
interface |
PMNavFolderObject
Represents the PMNav Folder object.
|
interface |
PointOnCurveJoint
Represents the PointOnCurve Joint.
|
interface |
PointOnCurveJointBuilder
Represents a
PointOnCurveJoint builder To create a new instance of this class, use PointOnCurveJointCollection.createPointOnCurveJointBuilder(nxopen.mechatronics.PointOnCurveJoint) Default values. |
interface |
PositionControl
Represents the Position Control.
|
interface |
PositionControlBuilder
Represents a
PositionControlBuilder . |
interface |
PreventCollision
Represents the Prevent Collision Constraint.
|
interface |
PreventCollisionBuilder
Represents a
PreventCollision builder. |
interface |
ProxyObject
Represents the Proxy Object class.
|
interface |
ProxyObjectBuilder
Represents a
ProxyObjectBuilder . |
interface |
ProxyObjectParameterBuilder
Represents a
ProxyObjectParameterBuilder . |
interface |
ProxyObjectParameterBuilderList
Represents a list of objects.
|
interface |
ProxyOverrideObject
Represents the Proxy Override Object class.
|
interface |
ProxyOverrideObjectBuilder
Represents a
ProxyOverrideObjectBuilder . |
interface |
ReadWriteDeviceBuilder
Represents a
ReadWriteDeviceBuilder . |
interface |
ReadWriteDeviceObject
Represents the ReadWriteDeviceObject class.
|
interface |
ReplacePhysicsBuilder
Represents a
ReplacePhysicsBuilder builder. |
interface |
RigidBody
Represents the Rigid Body class.
|
interface |
RigidBodyBuilder
Represents a
RigidBodyBuilder . |
interface |
RuntimeBehavior
Represents the Runtime Behavior class.
|
interface |
RuntimeBehaviorBuilder
Represents a
RuntimeBehaviorBuilder . |
interface |
RuntimeFormula
Represents the Runtime Formula class.
|
interface |
RuntimeFormulaBuilder
Represents a
Mechatronics.RuntimeFormulaBuilder . |
interface |
RuntimeFormulaParameter
Represents the Runtime Formula Parameter class.
|
interface |
RuntimeFormulaParameterBuilder
Represents a
RuntimeFormulaParameterBuilder builder To create a new instance of this class, use RuntimeFormulaCollection.createRuntimeFormulaParameterBuilder(nxopen.mechatronics.RuntimeFormulaParameter) Created in NX8.5.0 |
interface |
RuntimeFormulaParameterBuilderList
Represents a list of objects.
|
interface |
RuntimeNCBuilder
Represents a
RuntimeNCBuilder . |
interface |
RuntimeNCObject
Represents the RuntimeNCObject class.
|
interface |
SelectAdapterSignal
Represents a single object selection.
|
interface |
SelectCollisionSensor
Represents a single object selection.
|
interface |
SelectCollisionSensorList
Represents a list of objects on a selection list.
|
interface |
SelectLogicObjectList
Represents a list of objects on a selection list.
|
interface |
SelectPhysicsConstraint
Represents a single object selection.
|
interface |
SelectPhysicsJoint
Represents a single object selection.
|
interface |
SelectRigidBody
Represents a single object selection.
|
interface |
SelectSystemObject
Represents a single object selection.
|
interface |
SelectTagFormObject
Represents a single object selection.
|
interface |
SHMConfigurationBuilder
Represents a
SHMConfigurationBuilder builder To create a new instance of this class, use PhysicsManager.createSHMConfigurationBuilder() Created in NX9.0.0 |
interface |
SHMSignalConnectionBuilderList
Represents a list of objects.
|
interface |
SignalAdapter
Represents the Signal Adapter class.
|
interface |
SignalAdapterBuilder
Represents a
SignalAdapterBuilder . |
interface |
SignalConnectionBuilderList
Represents a list of objects.
|
interface |
SignalMappingBuilder
Represents a
SignalMappingBuilder To create a new instance of this class, use PhysicsManager.createSignalMappingBuilder() Created in NX8.5.0 |
interface |
SlidingJoint
Represents the Sliding Joint.
|
interface |
SlidingJointBuilder
Represents a
SlidingJoint builder. |
interface |
SpeedControl
Represents the Speed Control.
|
interface |
SpeedControlBuilder
Represents a
SpeedControl builder. |
interface |
SpringDamper
Represents the Spring Damper.
|
interface |
SpringDamperBuilder
Represents a
SpringDamper builder. |
interface |
SystemObject
Represents the System Object.
|
interface |
SystemObjectBuilder
Represents a
SystemObject builder This is an abstract class and cannot be created. |
interface |
SystemRoot
Represents the System Root class.
|
interface |
TagFormBuilder
Represents a
TagFormBuilder . |
interface |
TagFormObject
Represents the TagFormObject class.
|
interface |
TagTableObject
Represents the TagTableObject class.
|
interface |
TransportSurface
Represents the Transport Surface class.
|
interface |
TransportSurfaceBuilder
Represents a
TransportSurfaceBuilder . |
interface |
VirtualAxisBuilder
Represents a
nxopen.mechatronics.VirtualAxis builder To create a new instance of this class, use VirtualAxisCollection.createVirtualAxisBuilder(VirtualAxis) Created in NX10.0.0 |
Modifier and Type | Method and Description |
---|---|
TaggedObject |
RuntimeNCBuilder.getMCDConnection(boolean isAxis,
String axisOrEventName)
This method is used to get the MCD connected object to the specified axis or machine event
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER") . |
TaggedObject[] |
PMNavFolderObject.getObjects()
Gets physics objects.
|
Modifier and Type | Method and Description |
---|---|
void |
PMNavFolderObject.addObjects(TaggedObject[] objects)
Adds physics objects.
|
PMNavFolderObject |
PMNavFolderObjectCollection.findByObject(TaggedObject object)
Finds the
PMNavFolderObject object with the given physics object. |
void |
PMNavFolderObject.moveObjects(TaggedObject[] objects)
Moves physics objects.
|
void |
PMNavFolderObject.restoreObjects(boolean restoreAllMembers,
TaggedObject[] objects)
Restore physics objects.
|
void |
RuntimeNCBuilder.setMCDConnection(boolean isAxis,
String axisOrEventName,
TaggedObject mcdConnectedTag)
This method is used to set the MCD connected object to the specified axis or machine event
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER") . |
Modifier and Type | Interface and Description |
---|---|
interface |
SelectBlend
Represents a
SelectBlend
Allows user to specify blend faces. |
Modifier and Type | Interface and Description |
---|---|
interface |
AdamsSolverProperty
|
interface |
AnimationControl
|
interface |
ArticulationControl
|
interface |
BodyContact
Represents a
BodyContact
To create or edit an instance of this class, use BodyContactBuilder Created in NX5.0.0 |
interface |
BodyContactAdams
|
interface |
BodyContactBuilder
Represents a
BodyContactBuilder To create a new instance of this class, use BodyContactCollection.createBodyContactBuilder(nxopen.motion.BodyContact) Default values. |
interface |
BodyContactLms
|
interface |
BodyContactRecurdyn
|
interface |
Bushing
Represents a bushing
To create or edit an instance of this class, use BushingBuilder Created in NX6.0.0 |
interface |
BushingBuilder
Represents a Motion BushingBuilder
To create a new instance of this class, use BushingCollection.createBushingBuilder(nxopen.motion.Bushing) Default values. |
interface |
BushingCoefficients
Represents a Motion BushingCoefficients
.
|
interface |
BushingCylindricalCoefficients
Represents a Motion BushingCylindricalCoefficients
.
|
interface |
BushingCylindricalCoefficientsComponent
Represents a Motion BushingCylindricalCoefficientsComponent
.
|
interface |
BushingDefine
Represents a Motion BushingDefine .
|
interface |
BushingGeneralCoefficients
Represents a Motion BushingGeneralCoefficients
.
|
interface |
BushingGeneralCoefficientsComponent
Represents a Motion BushingGeneralCoefficientsComponent
.
|
interface |
Connector
Represents a connector
This is an abstract class, and cannot be created. |
interface |
ConnectorBuilder
Represents ConnectorBuilder
This is an abstract class, and cannot be created. |
interface |
Coupler
Represents a motion coupler object
This is an abstract class, and cannot be created. |
interface |
CouplerBuilder
Represents a
CouplerBuilder This is an abstract class, and cannot be created. |
interface |
CouplerCable
Represents a motion cable object
To create or edit an instance of this class, use CouplerCableBuilder Created in NX6.0.0 |
interface |
CouplerCableBuilder
Represents a
CouplerCableBuilder To create a new instance of this class, use CouplerCollection.createCouplerCableBuilder(nxopen.motion.CouplerCable) Default values. |
interface |
CouplerGear
Represents a motion gear object
To create or edit an instance of this class, use CouplerGearBuilder Created in NX6.0.0 |
interface |
CouplerGearBuilder
Represents a
CouplerGearBuilder To create a new instance of this class, use CouplerCollection.createCouplerGearBuilder(nxopen.motion.CouplerGear) Default values. |
interface |
CouplerRckpn
Represents a motion rack and pinion object
To create or edit an instance of this class, use CouplerRckpnBuilder Created in NX6.0.0 |
interface |
CouplerRckpnBuilder
Represents a
CouplerRckpnBuilder To create a new instance of this class, use CouplerCollection.createCouplerRckpnBuilder(nxopen.motion.CouplerRckpn) Default values. |
interface |
CurveContact
Represents a
CurveContact
To create or edit an instance of this class, use CurveContactBuilder Created in NX5.0.0 |
interface |
CurveContactAdams
|
interface |
CurveContactBuilder
Represents a
CurveContactBuilder To create a new instance of this class, use CurveContactCollection.createCurveContactBuilder(nxopen.motion.CurveContact) Default values. |
interface |
CurveContactRecurdyn
|
interface |
CurveOnCurve
Represents a curve on curve
To create or edit an instance of this class, use CurveOnCurveBuilder Created in NX6.0.0 |
interface |
CurveOnCurveBuilder
Represents a
CurveOnCurveBuilder
To create a new instance of this class, use CurveOnCurveCollection.createCurveOnCurveBuilder(nxopen.motion.CurveOnCurve) Created in NX6.0.0 |
interface |
Damper
Represents a damper
To create or edit an instance of this class, use DamperBuilder Created in NX6.0.0 |
interface |
DamperBuilder
Represents a DamperBuilder
To create a new instance of this class, use DamperCollection.createDamperBuilder(nxopen.motion.Damper) Created in NX6.0.0 |
interface |
DriverMultiOperations
|
interface |
DriverOperation
|
interface |
FlexBody
Represents the Motion FlexBody class.It must be associated
with a Motion Link.
|
interface |
FlexBodyBuilder
Represents a
FlexBody builder To create a new instance of this class, use FlexBodyCollection.createFlexBodyBuilder(nxopen.motion.FlexBody) Default values. |
interface |
FlexPhysicalDampingSettings
Represents the physical damping settings for flexible body .
|
interface |
GeneralCoupler
Represents motion 2-3 joint coupler
To create or edit an instance of this class, use GeneralCouplerBuilder Created in NX7.5.0 |
interface |
GeneralCouplerBuilder
Represents a
GeneralCouplerBuilder To create a new instance of this class, use GeneralCouplerCollection.createGeneralCouplerBuilder(nxopen.motion.GeneralCoupler) Default values. |
interface |
GraphBuilder
Represents a
GraphBuilder ,
only creation is supported
To create a new instance of this class, use GraphManager.createGraphBuilder(nxopen.motion.Graph) Created in NX5.0.0 |
interface |
Joint
Represents a motion joint object
To create or edit an instance of this class, use JointBuilder Created in NX5.0.0 |
interface |
JointBuilder
This builder class is used to create or edit
Joint objects. |
interface |
JointDefine
Represents a joint define object .
|
interface |
JointDriver
Represents a joint driver
To create or edit an instance of this class, use JointDriverBuilder Created in NX5.0.0 |
interface |
JointDriverBuilder
Represents a
JointDriverBuilder
To create a new instance of this class, use JointDriverCollection.createJointDriverBuilder(nxopen.motion.JointDriver) Created in NX5.0.0 |
interface |
JointFriction
Represents a joint friction object .
|
interface |
JointFrictionAdams
Represents a adams joint friction object .
|
interface |
JointFrictionLms
Represents a lms joint friction object .
|
interface |
JointFrictionRecurDyn
Represents a recurdyn joint friction object .
|
interface |
Link
Represents the Motion Link class.
|
interface |
LinkBuilder
Represents a
LinkBuilder
To create a new instance of this class, use LinkCollection.createLinkBuilder(nxopen.motion.Link) Created in NX5.0.0 |
interface |
LinkInitialVelocity
|
interface |
LinkMassProperty
|
interface |
LmsSolverProperty
|
interface |
LoadTransfer
Represents a Motion Load Transfer class
To create or edit an instance of this class, use LoadTransferBuilder Created in NX9.0.0 |
interface |
LoadTransferBuilder
Represents a
LoadTransferBuilder To create a new instance of this class, use LoadTransferCollection.createLoadTransferBuilder(nxopen.motion.LoadTransfer) Default values. |
interface |
LoadTransferControl
|
interface |
Marker
Represents the Motion Marker class.
|
interface |
MarkerBuilder
Represents a builder of Marker
To create a new instance of this class, use MarkerCollection.createMarkerBuilder(nxopen.motion.Marker) Default values. |
interface |
MarkerToNodeData
|
interface |
MotionBuilder
This builder class is used to create or edit
MotionObject This is an abstract class, and cannot be created. |
interface |
MotionObject
Represents the motion base object class.
|
interface |
MotionSensor
Represents a motion sensor
To create or edit an instance of this class, use MotionSensorBuilder Created in NX6.0.0 |
interface |
MotionSensorBuilder
Represents a
MotionSensorBuilder
To create a new instance of this class, use MotionSensorCollection.createMotionSensorBuilder(nxopen.motion.MotionSensor) Default values. |
interface |
MotionSolution
Represents a solution
To create or edit an instance of this class, use MotionSolutionBuilder Created in NX5.0.0 |
interface |
MotionSolutionBuilder
Represents a
MotionSolutionBuilder
To create a new instance of this class, use MotionSolutionCollection.createSolutionBuilder(nxopen.motion.MotionSolution) Created in NX5.0.0 |
interface |
Motor
Represents a motion motor base object class
This is an abstract class, and cannot be created. |
interface |
MotorBuilder
This builder class is used to create or edit
Motor This is an abstract class, and cannot be created. |
interface |
NormalModeProperty
Represents the properties of one normal mode .
|
interface |
Packaging
This class is an abstract class and base class for
PackagingMeasure ,
PackagingTrace and PackagingInterference objects. |
interface |
PackagingBuilder
This class an abstract class and base class for
PackagingMeasureBuilder ,
PackagingTraceBuilder and PackagingInterferenceBuilder . |
interface |
PackagingInterference
This class represents a Packaging Interference object.
|
interface |
PackagingInterferenceBuilder
This the builder class to create or edit an Interference object.
|
interface |
PackagingMeasure
This class represents a Packaging Measure object.
|
interface |
PackagingMeasureBuilder
This is the builder class to create or edit a Measure object.
|
interface |
PackagingTrace
This class represents a Packaging Trace object.
|
interface |
PackagingTraceBuilder
This is the builder class to create or edit a Trace object.
|
interface |
PhysicsConversionBuilder
Represents a
PhysicsConversionBuilder builder To create a new instance of this class, use MotionSession.createPhysicsConversionBuilder(nxopen.NXObject) Created in NX8.0.0 |
interface |
PlantInput
Represents a Plant Input motion object
To create or edit an instance of this class, use PlantInputBuilder Created in NX6.0.0 |
interface |
PlantInputBuilder
Represents a
PlantInput builder To create a new instance of this class, use PlantInputCollection.createPlantInputBuilder(nxopen.motion.PlantInput) Created in NX6.0.0 |
interface |
PlantOutput
Represents a Plant Output motion object
To create or edit an instance of this class, use PlantOutputBuilder Created in NX6.0.0 |
interface |
PlantOutputBuilder
Represents a
PlantOutput builder To create a new instance of this class, use PlantOutputCollection.createPlantOutputBuilder(nxopen.motion.PlantOutput) Created in NX6.0.0 |
interface |
PMDCMotor
Represents a motion pmdc motor object
To create or edit an instance of this class, use PMDCMotorBuilder Created in NX6.0.0 |
interface |
PMDCMotorBuilder
Represents a
PMDCMotorBuilder To create a new instance of this class, use PMDCMotorCollection.createPmdcMotorBuilder(nxopen.motion.PMDCMotor) Created in NX6.0.0 |
interface |
PointOnCurve
Represents a point on curve
To create or edit an instance of this class, use PointOnCurveBuilder Created in NX6.0.0 |
interface |
PointOnCurveBuilder
Represents a
PointOnCurveBuilder
To create a new instance of this class, use PointOnCurveCollection.createPointOnCurveBuilder(nxopen.motion.PointOnCurve) Default values. |
interface |
PointOnSurface
Represents a point on surface motion object
To create or edit an instance of this class, use PointOnSurfaceBuilder Created in NX6.0.0 |
interface |
PointOnSurfaceBuilder
Represents a
PointOnSurfaceBuilder
To create a new instance of this class, use PointOnSurfaceCollection.createPointOnSurfaceBuilder(nxopen.motion.PointOnSurface) Created in NX6.0.0 |
interface |
RecurdynSolverProperty
|
interface |
ScalarForce
Represents the Motion ScalarForce class.
|
interface |
ScalarForceBuilder
Represents a
ScalarForceBuilder To create a new instance of this class, use ScalarForceCollection.createScalarForceBuilder(nxopen.motion.ScalarForce) Created in NX6.0.0 |
interface |
ScalarTorque
Represents the Motion ScalarTorque class.
|
interface |
ScalarTorqueBuilder
Represents a
ScalarTorqueBuilder To create a new instance of this class, use ScalarTorqueCollection.createScalarTorqueBuilder(nxopen.motion.ScalarTorque) Created in NX6.0.0 |
interface |
SelectJoint
Represents a single object selection.
|
interface |
SelectLink
Represents a single object selection.
|
interface |
SelectMarker
Represents a single object selection.
|
interface |
SignalChart
Represents a motion Signal Chart object
To create or edit an instance of this class, use SignalChartBuilder Created in NX6.0.0 |
interface |
SignalChartBuilder
Represents a
SignalChartBuilder To create a new instance of this class, use SignalChartCollection.createSignalChartBuilder(nxopen.motion.SignalChart) Created in NX6.0.0 |
interface |
SignalChartListItem
Represents a SignalChartListItem,
List Item inside a SignalChartBuilder
To create a new instance of this class, use SignalChartCollection.createSignalChartListItem() Created in NX6.0.0 |
interface |
SignalChartListItemList
Represents a list of objects.
|
interface |
SpreadsheetRunControl
Represents the
SpreadsheetRunControl An instance of this class can not be obtained Created in NX9.0.0 |
interface |
Spring
Represents a spring
To create or edit an instance of this class, use SpringBuilder Created in NX6.0.0 |
interface |
SpringBuilder
Represents a SpringBuilder
To create a new instance of this class, use SpringCollection.createSpringBuilder(nxopen.motion.Spring) Default values. |
interface |
VectorForce
Represents a vector force
To create or edit an instance of this class, use VectorForceBuilder Created in NX5.0.0 |
interface |
VectorForceBuilder
Represents a
VectorForceBuilder
To create a new instance of this class, use VectorForceCollection.createVectorForceBuilder(nxopen.motion.VectorForce) Created in NX5.0.0 |
interface |
VectorTorque
Represents a vector torque
To create or edit an instance of this class, use VectorTorqueBuilder Created in NX5.0.0 |
interface |
VectorTorqueBuilder
Represents a
VectorTorqueBuilder
To create a new instance of this class, use VectorTorqueCollection.createVectorTorqueBuilder(nxopen.motion.VectorTorque) Created in NX5.0.0 |
interface |
VObject
Represents a VObject
.
|
Modifier and Type | Interface and Description |
---|---|
interface |
DesignStudyAttributeBuilder
Represents a
DesignStudyAttributeBuilder To create a new instance of this class, use DesignStudyCollection.createDesignStudyAttributeBuilder() Created in NX6.0.0 |
interface |
DesignStudyBuilder
Represents a
DesignStudyBuilder To create a new instance of this class, use DesignStudyCollection.createDesignStudyBuilder() Created in NX6.0.0 |
interface |
MapleExpBuilder
Represents a
MapleExpBuilder To create a new instance of this class, use OptimizationCollection.createMapleExpBuilder() Created in NX7.5.0 |
interface |
OptimizationAttributeBuilder
Represents a
OptimizationAttributeBuilder To create a new instance of this class, use OptimizationCollection.createOptimizationAttributeBuilder() Created in NX6.0.0 |
interface |
OptimizationBuilder
Represents a
OptimizationBuilder To create a new instance of this class, use OptimizationCollection.createOptimizationBuilder() Created in NX6.0.0 |
Modifier and Type | Interface and Description |
---|---|
interface |
FamilyAttribute
This class represents a part family attribute
Use PartFamily.TemplateManager#getPartFamilyAttribute to get an instance of this class. |
interface |
Instance
Represents an instance of a part family member
Use Part.getFamilyInstance() to get the instance of this class. |
interface |
InstanceSelectionCriteria
Represents the selection criteria of a part family instance
Use Component.createEmptyPartFamilyInstanceSelectionCriteria(nxopen.partfamily.Template) to get an instance of this class. |
interface |
Template
This class represents a part family template
Use PartFamily.TemplateManager#createPartFamily to get the instance of this class. |
Modifier and Type | Interface and Description |
---|---|
interface |
AttributeGroupDescription
Represents an attribute group type.
|
interface |
AttributeGroupReviseBuilder
Represents an attribute group revise builder.
|
interface |
ConfigurationContextBuilder
Represents a
ConfigurationContextBuilder builder To create a new instance of this class, use ConfigurationManager.createConfigurationContextBuilder() Created in NX9.0.0 |
interface |
DesignElementRevision
Represents the design element revision in the database.
|
interface |
DesignFeatureRevision
Represents the design feature revision in the database.
|
interface |
DesignSubordinateRevision
Represents the design subordinate revision in the database.
|
interface |
EffectivityAttributePropertiesBuilder
Represents an
EffectivityAttributePropertiesBuilder to be used for creating effectivity attributes. |
interface |
EffectivityTableRow
Represents the class that contains effectivity parameters.
|
interface |
GenericObjectAttributeHolder
Represents the class that contains database business logic or pre-creation information for the objects.
|
interface |
LogicalObject
Represents the class that contains database business logic or pre-creation information for the objects.
|
interface |
ModelElementRevision
Represents a base class that provides common methods for various model elements in a
CollaborativeDesign . |
interface |
NativePartLogicalObject
Represents the class that contains information for the objects participating in import operation.
|
interface |
ObjectCreateBuilder
Represents a builder class that perofrms create operation
To create a new instance of this class, use PdmSession.createObjectCreateBuilder(java.lang.String[], java.lang.String[]) Created in NX10.0.0 |
interface |
PartCreationObject
This class is a proxy for a to-be-created part prior to the part being created.
|
interface |
PartCreationObjectAttributePropertiesBuilder
Deprecated.
Deprecated in NX8.5.0. Use
AttributePropertiesBuilder instead.
|
interface |
PartOperationAttributePropertiesBuilder
Represents an
PartOperationAttributePropertiesBuilder to be used for
creating attributes in part operation. |
interface |
PartOperationBuilder
Represents a builder class that performs various design element operations.
|
interface |
PartOperationCopyBuilder
Represents a builder class that performs various Save As operations.
|
interface |
PartOperationCreateBuilder
Represents a builder class that performs Create operations
To create a new instance of this class, use PdmSession.createCreateOperationBuilder(nxopen.pdm.PartOperationBuilder.OperationType) Created in NX10.0.0 |
interface |
PartOperationImportCallbackData
JA interface for PartOperationImportCallbackData object
This cannot be created . |
interface |
PartOperationMakeUniqueBuilder
Represents a
PartOperationMakeUniqueBuilder builder To create a new instance of this class, use PdmSession.createMakeUniqueOperationBuilder(nxopen.BasePart) Created in NX10.0.0 |
interface |
PartOperationValidationPropertiesBuilder
Represents an
PartOperationValidationPropertiesBuilder to be used
for overriding the default validation parameters for a part in import operation. |
interface |
VariantConfigurationBuilder
Represents a builder class that performs variant rule configuration.
|
Modifier and Type | Interface and Description |
---|---|
interface |
PhysicalMaterialAssignBuilder
Represents a Physical Material Assign Builder
To create a new instance of this class, use PhysicalMaterialCollection.createMaterialAssignBuilder() Created in NX6.0.0 |
interface |
PhysicalMaterialLibMgrBuilder
Represents a
PhysicalMaterialLibMgrBuilder builder To create a new instance of this class, use PhysicalMaterialCollection.createMaterialLibmgrBuilder() Created in NX6.0.0 |
interface |
PhysicalMaterialListBuilder
This builder is used by the Materials list component that allows copying, editing, deleting. etc.
|
Modifier and Type | Interface and Description |
---|---|
interface |
ComponentConstraint
Constraint for use in positioning assembly objects in NX.
|
interface |
ComponentNetwork
Network for use in positioning components in NX.
|
interface |
ComponentPositioner
An instance of this class can be used to create
Constraint s and
associated objects. |
interface |
Constraint
Constraint for use in positioning objects in NX.
|
interface |
ConstraintReference
ConstraintReference for use in positioning objects in NX.
|
interface |
DisplayedConstraint
The displayed representation of a constraint, used for graphical
display and to represent it in the Assembly Navigator.
|
interface |
MatingConverter
An instance of this class can be used to convert Mating Conditions
to Assembly Constraints in its owning assembly or in child parts
of its owning assembly.
|
interface |
Network
Network for use in positioning objects in NX.
|
interface |
Positioner
An instance of this class can be used to create
Constraint s and
associated objects. |
Modifier and Type | Interface and Description |
---|---|
interface |
LoadDraftingStandardBuilder
Represents a
LoadDraftingStandardBuilder
To create a new instance of this class, use DraftingPreferenceManager.createLoadDraftingStandardBuilder() Created in NX5.0.0 |
interface |
ViewSection
Records / queries view section preferences.
|
interface |
WorkPlane
Represents the set of WorkPlanePreferences preferences applicable to part.
|
Modifier and Type | Interface and Description |
---|---|
interface |
AddFontBuilder
Builder for creating an add font user interface dialogue
To obtain an instance of this class use AddFontBuilder Created in NX8.5.0 |
interface |
Anchor
A Routing Anchor defines a position in a Qualified Routing component part.
|
interface |
ArcSegment
Represents a arc segment.
|
interface |
AssemblyDefinition
Represents a collection of
SingleDevice objects that are used in an assembled product. |
interface |
AssignCornerBuilder
Builder class for Assign Corner which creates corner
To create a new instance of this class, use RouteManager.createAssignCornerBuilder() Default values. |
interface |
AssignDiscontinuityBuilder
the Builder to Assign Discontinuity for the stocks
To create a new instance of this class, use RouteManager.createAssignDiscontinuityBuilder(nxopen.NXObject) Created in NX7.5.0 |
interface |
AssignPathBuilder
Assigns path to a broken routing run
To create a new instance of this class, use RouteManager.createAssignPathBuilder(nxopen.routing.Run) Created in NX8.5.0 |
interface |
AttributeHolder
Represents a
AttributeHolder
Use Routing.RouteManager#createAttributeHolder to get the instance of this class. |
interface |
AttributeMembersBuilder
Creates attibutemembers builder object to add to the search criteria list used by FindByAttributesBuilder
To create a new instance of this class, use FindByAttributesBuilder.attributeMembersBuilder() Created in NX8.5.0 |
interface |
BendCorner
Computes a fillet curve between two linear segments to form a smooth
bend transition from one segment to another.
|
interface |
BranchPathNumberingBuilder
Builder class for Branch Path Numbering.
|
interface |
BuiltInPath
The Routing BuiltInPath object stores a set of curves.
|
interface |
ClockPartBuilder
Builder class for clock part object
To create a new instance of this class, use RouteManager.createClockPartBuilder(nxopen.NXObject) Default values. |
interface |
CompareRunsBuilder
Represents a
CompareRunsBuilder , used to compare runs in the work
part to the ones in another part, or to runs defined in xml files gathered in a folder
(native mode) or on an item revision (managed mode). |
interface |
ConnectedCurvesBuilder
Builder for creating automatically creating segments on end-to-end connected
curves.
|
interface |
ConnectivityDefinition
The base class for various connection objects.
|
interface |
ConnectPathBuilder
Represents a
ConnectPathBuilder . |
interface |
ControlPoint
Routing Control Points define a position in space, and are used to determine connections
from segments to segments, and segments to ports.
|
interface |
CopeCorner
The cope corner is a corner that trims stocks at a junction.
|
interface |
CopeCornerBuilder
Deprecated.
Deprecated in NX8.0.0. Use
AssignCornerBuilder instead.
|
interface |
Corner
The Routing Corner is the abstract parent class of all other corner objects.
|
interface |
CornerTypeBuilder
Contains setting for corner creation.
|
interface |
CreateFabricationBuilder
Builder class to fabricate subassembly from standard parts, path segments, stock, and other routing objects within the current routing assembly
To create a new instance of this class, use RouteManager.createFabricationBuilder(nxopen.NXObject[]) Created in NX8.0.0 |
interface |
CrossSection
A
CrossSection defines a profile to sweep for Stock objects. |
interface |
DefineRunBuilder
Builder Class for DefineRun Object
To create a new instance of this class, use RouteManager.createDefineRunBuilder(nxopen.routing.Run) Created in NX8.5.0 |
interface |
DeleteFontsBuilder
Represents a
DeleteFontsBuilder
To create a new instance of this class, use RouteManager.createDeleteFontsBuilder(nxopen.NXObject[]) Created in NX8.5.0 |
interface |
DeleteGapsBuilder
Represents a
DeleteGapsBuilder
To create a new instance of this class, use RouteManager.createDeleteGapsBuilder(nxopen.NXObject[]) Created in NX8.5.0 |
interface |
DeleteObjectsBuilder
Represents a
DeleteObjectsBuilder
To create a new instance of this class, use RouteManager.createDeleteObjectsBuilder(nxopen.NXObject[]) Created in NX6.0.0 |
interface |
DesignRule
Represents
DesignRule object Creator not available in KF. |
interface |
DesignRuleOverride
Represents Routing DesignRuleOverride object
Creator not available in KF. |
interface |
DesignRuleViolation
Represents
DesignRuleViolation object Design Rule Violation object is created automatically during design rule check Created in NX4.0.2 |
interface |
DesignRuleViolationLocation
Represents
DesignRuleViolationLocation object Design Rule Violation Location object get created automatically during design rule check Created in NX6.0.0 |
interface |
DesignRuleViolationViewer
This class can be used to set the violation id, update text for overridding the violation and
update the user name used to override the violation.
|
interface |
DeviceRelationship
Represents a relationship between
SingleDevice objects. |
interface |
DiscontinuityCorner
A discontinuity corner is a corner that forces
Routing.Stock objects
to split as they cover the segments attached to the discontinuity corner. |
interface |
Division
Represents
Division Creator not available in KF because transient objects are not supported. |
interface |
DivisionsBuilder
Represents a
DivisionsBuilder
Builder for creating/editing splits at an end of a duct. |
interface |
DuctReinforcementBuilder
Builder for creating/editing duct reinforcements.
|
interface |
DuctSizeCalculatorBuilder
Builder to perform calculations of the duct which is to be used in the HVAC applications.
|
interface |
EditBendAngleBuilder
To create a new instance of this class, use RouteManager.createEditBendAngleBuilder(nxopen.NXObject) Created in NX7.5.0 |
interface |
EditCharacteristicsBuilder
Builder to edit required and optional characteristics of
Routing.Stock
or Assemblies.Component as defined in the application view file. |
interface |
EditLineSegmentBuilder
Builder for the "Edit Line Segment" operation.
|
interface |
EditPlacePartBuilder
To create a new instance of this class, use RouteManager.createEditPlacePartBuilder(nxopen.assemblies.Component) Created in NX10.0.0 |
interface |
ElbowSnapSettings
Helper object used the by
LinearPathBuilder builder. |
interface |
Filler
Represents a Filler .
|
interface |
FillerStockBuilder
Creates Filler stock on selected Segments.
|
interface |
FindByAttributesBuilder
Find runs/objects with specified attribute name and attribute value criteria,
highlight the corresponding nodes in the run navigator and the graphics area
To create a new instance of this class, use RouteManager.createFindByAttributesBuilder() Created in NX8.5.0 |
interface |
FittingOverstock
The
FittingOverstock object represents overstock
applied over the faces of the routing parts. |
interface |
FittingOverstockBuilder
Builder for creating or editing
FittingOverstock objects. |
interface |
FormboardFrame
The
FormboardFrame is a (not pure) virtual class. |
interface |
FormboardFrameCGM
Represents a Formboard Frame CGM.
|
interface |
FormboardFramePattern
Represents a Formboard Frame Pattern.
|
interface |
FormboardFrameRectangle
Represents a Formboard Frame Rectangle.
|
interface |
GapArcSegment
Represents a gap arc segment.
|
interface |
GapDisplayBuilder
Builder for creating a gap arc object on a line segment.
|
interface |
HandrailBuilder
Represents a
HandrailBuilder
Creates a handrail from a selected point. |
interface |
InfoObjectsBuilder
Represents a
InfoObjectsBuilder
To create a new instance of this class, use RouteManager.createInfoObjectsBuilder(nxopen.NXObject[]) Created in NX6.0.0 |
interface |
InstanceNameLookupBuilder
Represents a
InstanceNameLookupBuilder . |
interface |
IntegrateRunsBuilder
Builder Class for Integrate Runs Object
To create a new instance of this class, use RouteManager.integrateRunsBuilder(nxopen.routing.Run, nxopen.routing.Run) Default values. |
interface |
InterfaceTerminalBase
The
InterfaceTerminalBase corresponds to an abstract class for
a prototype nxopen.routing.Port . |
interface |
InterfaceTerminalRelationshipBase
The abstract class
InterfaceTerminalRelationshipBase relates many
nxopen.routing.Port s to one nxopen.routing.Port . |
interface |
InterfaceTerminalRelationshipShadow
Represents an assembly shadow of
InterfaceTerminalRelationshipBase . |
interface |
InterfaceTerminalShadow
Represents the defining data for a physical
nxopen.routing.Port . |
interface |
IsoDrawingBuilder
Represents a
IsoDrawingBuilder , used to run the ISOGEN engine
to create isometric drawings of piping networks. |
interface |
ItemDefinition
ItemDefinition object corresponds to DDID in AP212 and to a piece
part or routing stock in NX. |
interface |
LinearPathBuilder
Builder for creating routing linear paths.
|
interface |
LinearPathSettings
Helper object used the by
Routing.LinearPathBuilder builder. |
interface |
LineSegment
Represents a line segment.
|
interface |
LogicalTerminal
Assembly instance of a
InterfaceTerminalBase . |
interface |
ManualRouteBuilder
To create a new instance of this class, use RouteManager.createManualRouteBuilder(nxopen.routing.electrical.ElectricalStockDevice.RouteLevel, nxopen.routing.electrical.ElectricalStockDevice) Created in NX7.5.0 |
interface |
MergeStocksBuilder
Represents a
MergeStocksBuilder
Builder for merging routing stocks ( including space reservation stocks ). |
interface |
MiterCorner
This class defines a mitered corner.
|
interface |
MiteredBendCorner
Computes a fillet curve between two linear segments to form a smooth
bend transition from one segment to another that represents a mitered bend.
|
interface |
ModelTerminalsBuilder
The Builder to Model/UnModel the Terminals
To create a new instance of this class, use RouteManager.modelTerminalsBuilder() Default values. |
interface |
ObjectRelationship
Represents a relationship between Routing objects.
|
interface |
OffsetPath
The Routing OffsetPath object is the set of information needed to define an offset route.
|
interface |
Overstock
Represents an
Overstock object. |
interface |
OverstockApplication
Represents a collection of
OverstockApplication objects. |
interface |
OverstockBuilder
Builder for creating/editing overstocks.
|
interface |
OverstockFacesBuilder
Builder for qualifying faces for overstock application over fittings.
|
interface |
PartDefinitionBase
The abstract class
PartDefinitionBase contains
information defining a logical part. |
interface |
PartDefinitionShadow
PartDefinitionShadow contains the defining data for a
logical part, such as an connector. |
interface |
Path
The Routing Path object is the set of ordered continuous segments.
|
interface |
PathStockBuilder
Assigns stocks to segments based of users critiera and the current
default stock.
|
interface |
PlacementSolutionsBuilder
To create a new instance of this class, use RouteManager.createPlacementSolutionsBuilder() Created in NX7.5.0 |
interface |
PlacePartBuilder
To create a new instance of this class, use RouteManager.createPlacePartBuilderPTS(nxopen.TaggedObject, nxopen.TaggedObject, nxopen.Point3d, nxopen.TaggedObject) Created in NX7.5.0 |
interface |
Platform
|
interface |
PlatformCreatorBuilder
Builder for creating platform.
|
interface |
QuickPathBuilder
Builder for creating a collision free path between points.
|
interface |
RemoveDiscontinuityBuilder
Builder class for remove discontinuity object
To create a new instance of this class, use RouteManager.createRemoveDiscontinuityBuilder(nxopen.NXObject[]) Created in NX7.5.0 |
interface |
RootObject
The
RootObject is the parent
class of all other Routing logical objects. |
interface |
RouteLogicalAssociation
RouteLogicalAssociation object associates non-electrical components to
electrical components.
|
interface |
RouteObject
The Top level routing data model object.
|
interface |
RouteObjectCollector
Represents a
RouteObjectCollector class
to create objects for getting routing objects. |
interface |
RoutePartDescriptor
Represents a part descriptor chrx.
|
interface |
RouteSegmentFont
Represents a route segment font.
|
interface |
RouteSegmentFontElement
Represents a route segment font element.
|
interface |
RouteSweptFoldBuilder
Represents a Rout Swept Fold Builder
To create a new instance of this class, use RouteManager.createRouteSweptFoldBuilder(nxopen.NXObject, nxopen.NXObject) Created in NX7.0.0 |
interface |
RouteSweptTwistBuilder
To create a new instance of this class, use RouteManager.createRouteSweptTwistBuilder(nxopen.NXObject) Created in NX6.0.0 |
interface |
RoutingMeasureDistanceBuilder
Represents a
RoutingMeasureDistanceBuilder Creator not available in KF because transient objects are not supported. |
interface |
RoutingSystem
Routing object is a collection of
Run objects. |
interface |
Run
Routing Run object references components and stocks which comprise a piping run.
|
interface |
RunItemsBuilder
The builder for creating the list item of RunItems
To create a new instance of this class, use DefineRunBuilder.createRunItemsBuilder() Created in NX8.5.0 |
interface |
RunItemsBuilderList
Represents a list of objects.
|
interface |
SBendCorner
The Routing SBendCorner defines a S-Bend.
|
interface |
SegmentPairBuilder
The builder for creating the list item of SegmentPairs
To create a new instance of this class, use AssignDiscontinuityBuilder.segmentPairBuilder() Created in NX7.5.0 |
interface |
SelectControlPoint
Represents a single object selection.
|
interface |
SelectISegment
Represents a single object selection.
|
interface |
SelectLineSegment
Represents a single object selection.
|
interface |
SelectRun
Represents a single object selection.
|
interface |
SelectStock
Represents a single object selection.
|
interface |
SimplifyPathBuilder
Represents a
SimplifyPathBuilder for Simplify Path operation. |
interface |
SingleDevice
The Routing SingleDevice corresponds to an abstract instance of
ItemDefinition . |
interface |
SpaceReservationBuilder
Represents a
SpaceReservationBuilder
This builder takes one or more segments and creates space reservation stock on it. |
interface |
SplinePathBuilder
Builder for creating a D-Cubed constrained spline.
|
interface |
SplineSegment
Represents a spline segment.
|
interface |
SplitDuctBuilder
Represents a
SplitDuctBuilder
Builder for creating/editing splits at an end of a duct. |
interface |
SplitRunBuilder
Builder Class for Split Run Object
To create a new instance of this class, use RouteManager.splitRunBuilder(nxopen.routing.Run) Default values. |
interface |
Stock
The
Stock object represents a material (such as as pipe or tube)
that covers a path of segments. |
interface |
StockBrowserBuilder
Builder class for stock browser .
|
interface |
StockBuilder
Builder for creating/editing stocks.
|
interface |
StockColorBuilder
Represents a
StockColorBuilder . |
interface |
StockData
|
interface |
StockDefinition
Represents Routing StockDefinition object
Creator not available in KF. |
interface |
StockDevice
The Routing StockDevice corresponds to a generic stock instance
of
Routing.SingleDevice . |
interface |
StockOffsetPointBuilder
Applies Assemblies Constraints to a selected
Point or
ControlPoint to mimic the update/move behavior of
the input smart Point . |
interface |
StockPartConverterBuilder
Represents a
StockPartConverterBuilder
Builder for Part Conversion of the stocks. |
interface |
StockStyleBuilder
Builder class to assigns style to the selected stock .
|
interface |
StockTransition
Represents
StockTransition object. |
interface |
StockTransitionBuilder
Builder for creating/editing stockTransition.
|
interface |
SubdivideSegmentBuilder
Represents a
SubdivideSegmentBuilder . |
interface |
TransformPathBuilder
Builder for the "Transform Path" operation.
|
interface |
UnifyPathBuilder
Builder to unify
Routing.Stock and Assemblies.Component
based on specified characteristic values. |
interface |
WatertightFittingsBuilder
Represents a
WatertightFittingsBuilder To create a new instance of this class, use RouteManager.createWatertightFittingsBuilder() Created in NX8.0.0 |
interface |
WindCatcherBuilder
Builder class for Wind Catcher feature.
|
interface |
Wire
The Routing Wire object is the set of information needed to define
a ROUTE_wire.
|
Modifier and Type | Field and Description |
---|---|
TaggedObject |
PlacePartBuilder.LoadedPartInfoData.loadedinst
The Instance object of the loaded part.
|
TaggedObject |
PlacePartBuilder.LoadedPartInfoData.loadedpart
The PART object of the loaded part.
|
Modifier and Type | Method and Description |
---|---|
TaggedObject |
RunItemsBuilder.currentSelectedPort()
Returns the ports of FROM/TO item of the run.
|
TaggedObject |
RunItemsBuilder.getVirtualStubItem(String virtualReferenceId)
A virtual stub item to be used as From/To item.
|
Modifier and Type | Method and Description |
---|---|
void |
DefineRunBuilder.addMemberItems(TaggedObject memberItem)
Append a member item to the list in the builder for DefineRun
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic") . |
ControlPointCollection.CreateControlPointData |
ControlPointCollection.createControlPoint(TaggedObject object,
double objectParm,
ControlPointCollection.CheckExisting checkExisting)
Creates a
ControlPoint at the given object and normalized parameter. |
PlacePartBuilder |
RouteManager.createPlacePartBuilder(String nodeIdentifier,
int filteredPtbRowIndex,
Point3d placementPos,
TaggedObject placementObj)
Creates a
PlacePartBuilder that is used to place
a routing part into an assembly. |
PlacePartBuilder |
RouteManager.createPlacePartBuilderFS(String nodeIdentifier,
CharacteristicList fileSelectCharx,
Point3d placementPos,
TaggedObject placementObj,
boolean replacePartOp)
Creates a
PlacePartBuilder that is used to place
a routing part into an assembly. |
PlacePartBuilder |
RouteManager.createPlacePartBuilderPTS(TaggedObject ptsPart,
TaggedObject ptsInstance,
Point3d placementPos,
TaggedObject placementObj)
Creates a
PlacePartBuilder that is used to place
a routing part into an assembly. |
PlacePartBuilder |
RouteManager.createRoutingPlacePartBuilder(CharacteristicList partCharx,
Point3d placementPos,
TaggedObject placementObj)
Creates a
PlacePartBuilder that is used to place
a routing part into an assembly. |
void |
EditPlacePartBuilder.finalizePlacementForScrewSeat(TaggedObject startPointId,
TaggedObject endPointId,
Point3d alignStartPoint,
Point3d alignEndPoint,
Expression length,
Expression angle,
Vector3d alignVector,
TaggedObject screwSeatInstance,
TaggedObject target)
Places a screw measurement holder seat part onto a target object by locating and constraining by the given parameters.
|
boolean |
RouteManager.hasAllReferencingStockComponentsLoaded(TaggedObject objectToValidate)
Checks whether all the stock components referenced by the given Routing object are loaded or not.
|
void |
PlacementSolutionsBuilder.initializePlacementData(TaggedObject part,
Point3d placementPos,
TaggedObject partToPlace)
Initialize Placement Data
License requirements: routing_base ("Routing Basic") . |
void |
DefineRunBuilder.removeMemberItems(TaggedObject[] memberItems)
Remove a member item from the list in the builder for DefineRun
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic") . |
void |
PlacePartBuilder.replaceLoadedInstance(TaggedObject partInst)
Replace the builder's part instance with a new instance.
|
void |
RunItemsBuilder.setCurrentSelectedPort(TaggedObject selectedPort)
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic") . |
void |
PlacePartBuilder.setLoadedPartInfo(TaggedObject loadedPart,
TaggedObject loadedInst)
Get information about the parts being placed.
|
void |
EditBendAngleBuilder.setRCP(TaggedObject bendRcp)
Set the Bend RCP to edit.
|
void |
PlacePartBuilder.setScrewSeatPlacement(TaggedObject startLocation,
TaggedObject endLocation,
Point3d startPoint,
Point3d endPoint,
Expression length,
Expression angle)
Sets the input parameters to be used for measurement holder screw seats.
|
void |
RunItemsBuilder.setSelectedItemData(TaggedObject scopedObject,
String referenceId,
String portName,
TaggedObject[] availablePorts)
The selected items data of the run
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic") . |
void |
RunItemsBuilder.setSelectedItemData(TaggedObject scopedObject,
String referenceId,
String portName,
TaggedObject[] availablePorts)
The selected items data of the run
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic") . |
void |
RouteManager.unifyPath(TaggedObject inputObject,
CharacteristicList newCharxList)
Changes the given stock or component to a new object that matches the given characteristics.
|
void |
PlacePartBuilder.updatePlacementObj(TaggedObject placementObj,
Point3d placementPos)
Update the loaded part with a new placement location and object.
|
Modifier and Type | Interface and Description |
---|---|
interface |
AssignProxyBuilder
Represents a
AssignProxyBuilder . |
interface |
CableDefinition
Holds the collection of wires in a
CableDevice . |
interface |
CableDevice
Corresponds to a cable instance of an
ElectricalStockDevice . |
interface |
CableStockDefinition
Describes a cable's stock.
|
interface |
CablewaysBuilder
Represents
CablewaysBuilder . |
interface |
CablewaysLayoutBuilder
Represents
CablewaysLayoutBuilder . |
interface |
CablewaysLayoutView
Represents the CablewaysLayoutView class.
|
interface |
ConnectorDevice
The Electrical ConnectorDevice corresponds to a connector instance of
SingleDevice . |
interface |
ElectricalDeviceRelationship
Represents a relationship between Routing Electrical devices.
|
interface |
ElectricalFormat
Represents a Routing Electrical ElectricalFormat.
|
interface |
ElectricalNavigatorFilter
Represents a Routing Electrical Navigator Filter object.
|
interface |
ElectricalPartDefinitionShadow
Represents
ElectricalPartDefinitionShadow object Creator not available in KF. |
interface |
ElectricalStockDefinition
Represents
ElectricalStockDefinition object Creator not available in KF. |
interface |
ElectricalStockDevice
The Electrical Stock Device is a non instantiable superclass to classify
all electrical stock-based single devices.
|
interface |
HarnessDefinition
Represents a
HarnessDefinition Creator not available in KF. |
interface |
HarnessDevice
The Electrical HarnessDevice corresponds to a harness instance of the
Routing.SingleDevice . |
interface |
ShieldDefinition
Represents Routing Electrical ShieldDefinition object
Creator not available in KF. |
interface |
ShieldDevice
The Electrical ShieldDevice corresponds to a shield instance of
Routing.Electrical.ElectricalStockDevice . |
interface |
ShieldStockDefinition
Represents Routing Electrical ShieldStockDefinition object
Creator not available in KF. |
interface |
SystemDefinition
Represents a
SystemDefinition Creator not available in KF. |
interface |
SystemDevice
The Electrical SystemDevice corresponds to a system instance of the
SingleDevice . |
interface |
WireDevice
The Electrical WireDevice corresponds to a wire instance of
ElectricalStockDevice . |
Modifier and Type | Interface and Description |
---|---|
interface |
ShapeSearchBuilder
This class provides the methods to execute shape search and get the searched results.
|
Modifier and Type | Interface and Description |
---|---|
interface |
FlatPatternSettings
Provides access to object and callout properties for sheet-metal data in
flat pattern views on drawings.
|
Modifier and Type | Interface and Description |
---|---|
interface |
IsvControlPanelBuilder
Represents a
IsvControlPanelBuilder
To create a new instance of this class, use KinematicConfigurator.createIsvControlPanelBuilder(nxopen.sim.IsvControlPanelBuilder.VisualizationType, nxopen.cam.CAMObject[]) Created in NX8.0.0 |
interface |
KinematicAxisBuilder
Represents the SimKimAxisBuilder class object
Use the KinematicConfigurator class to create a KinematicAxisBuilder object. |
interface |
KinematicChain
This class is used for add kinematic chain to the list.
|
interface |
KinematicChainConfiguration
This class is used for define kinematic chains.
|
interface |
KinematicChainList
Represents a list of objects.
|
interface |
KinematicComponent
Represents the KinematicComponent class object
Use the KinematicConfigurator class to create a KinematicComponent object. |
interface |
KinematicComponentBuilder
Represents the KinamaticComponentBuilder class object
To create a new instance of this class, use KinematicComponentCollection.createHeadBaseComponentBuilder(nxopen.sim.KinematicComponent) Created in NX7.5.0 |
interface |
KinematicConfigurator
Represents the ISV base class object
To obtain an instance of this class, use Part.kinematicConfigurator() Created in NX7.5.0 |
interface |
KinematicJunction
Represents the KinematicJunction class object
Use the KinematicConfigurator class to create a SimKimJunction object. |
interface |
KinematicJunctionBuilder
Represents the SimKimJunctionBuilder class object
Use the KinematicConfigurator class to create a KinematicJunctionBuilder object. |
interface |
KinematicJunctionBuilderList
Represents a list of objects.
|
interface |
KinematicSinumerikCaBuilder
This class is used for edit sinumerik collision avoidance properties.
|
interface |
NcChannelSelectionData
Represents the NcChannelSelectionData class object
Use the NcChannelSelectionData class to create a NcChannelSelectionData object. |
interface |
SimDebugBuilder
Represents a
SimDebugBuilder
To create a new instance of this class, use KinematicConfigurator.createSimDebugBuilder() Created in NX8.0.0 NX_REMOVE_FROM_JAVA_API |
interface |
SinumerikCaFacetBuilder
This class is used for set the facet tolerance.
|
interface |
SinumerikCaPlaceholderBuilder
This class is used for select or unselect component of the placeholder tools.
|
interface |
SinumerikCaSimplifyBodiesBuilder
This class is used for replace geometry.
|
Modifier and Type | Interface and Description |
---|---|
interface |
AddReusablePart
Represents a
AddReusablePart
To create a new instance of this class, use AddReusablePartCollection.createBuilder() Created in NX5.0.0 |
interface |
AssemblyDrawingBuilder
Represents a
AssemblyDrawingBuilder which is
used to create or edit the Assembly Drawing. |
interface |
AssignPatchBuilder
Represents a builder to be used to add sheet bodies as patch surfaces or delete patch surfaces.
|
interface |
AutoDimensionBuilder
Represents a
AutoDimensionBuilder which is
used to create or edit the Auto Dimension. |
interface |
BackingPadBuilder
Represents a
BackingPadBuilder which is used to create or delete the Backing Pad. |
interface |
BendInsertDesignBuilder
Represents a
BendInsertDesignBuilder
Bend Insert Design is to create inset puch or die for bend . |
interface |
BendOperationBuilder
Represents a
BendOperationBuilder builder. |
interface |
BlankGeneratorBuilder
Represents a
BlankGeneratorBuilder
This class is for Blank Generator Design UI
To create a new instance of this class, use BlankGeneratorCollection.createBlankGeneratorBuilder() Created in NX7.5.0 |
interface |
BlankLayoutBuilder
Progressive Die Wizard blank layout builder
To create a new instance of this class, use BlankLayoutCollection.createBlankLayoutBuilder() Default values. |
interface |
BlankNestingBuilder
Blank Nesting Builder of PDW, EDW and Die Engineering.
|
interface |
BlendCurve3DBuilder
Represents a
BlendCurve3DBuilder builder which implements
blend curves in one side where the corner radius is too small. |
interface |
BomBuilder
Represents a Tooling::BomBuilder builder
To create a new instance of this class, use BomCollection.createBomBuilder() Default values. |
interface |
BomListBuilder
Represents a
BomListBuilder builder. |
interface |
BurringInsertBuilder
Progressive Die Wizard builder to design burring punch and die insert
To create a new instance of this class, use BurringInsertCollection.createBurringInsertBuilder() Default values. |
interface |
CalculateAreaBuilder
The CalculateArea builder
To create a new instance of this class, use CalculateAreaCollection.createBuilder() Default values. |
interface |
ChangeoverManagementBuilder
Represents a
ChangeoverManagementBuilder to support changeover workflow management. |
interface |
ChannelAdjustBuilder
The builder class for Channel Adjust which assists you
to adjust the postion and the length of the channel.
|
interface |
ChannelFittingBuilder
The builder class for Channel Fitting which assists you
to add cooling fitting.
|
interface |
ClearanceManagementBuilder
Progressive Die Wizard builder to management clearances.
|
interface |
CompDrawingBuilder
Represents a
CompDrawingBuilder which is
used to create or edit the Component Drawing. |
interface |
ConceptPositionBuilder
concept position builder for standard part design
To create a new instance of this class, use ConceptPositionCollection.createConceptPositionBuilder() Created in NX6.0.0 |
interface |
ConcurrentDesignManagementBuilder
Represents a
ConcurrentDesignManagementBuilder to support concurrent design workflow management. |
interface |
CoolingConnectBuilder
The builder class for Cooling connection which assists you
to create channel and connect it to other channels.
|
interface |
CoolingDefineChannelBuilder
The builder class for Cooling Define Channel which assists you
to create channels directly.
|
interface |
CoolingExtendBuilder
The builder class for Channel Extend which assists you
to extend the channel.
|
interface |
CoolingPatternBuilder
The builder class for Cooling pattern which assists you
to create channels with selected curves.
|
interface |
CornerDesignBuilder
Represents a
CornerDesignBuilder ,
Corner Design is to provide tools to make corner. |
interface |
CreateBoxBuilder
Represents a box creation operation
To create a new instance of this class, use CreateBoxCollection.createBoxBuilder(nxopen.NXObject) Default values. |
interface |
DefineCamBuilder
Represents a
DefineCamBuilder to create different types of cam objects, which
are used for kinematic motion To create a new instance of this class, use ProgressiveDieManager.createDefineCamBuilder() Default values. |
interface |
DefineLifterBuilder
Represents a
DefineLifterBuilder to create different types of lifter objects, which
are used for kinematic motion. |
interface |
DefineNeutralFactorBuilder
Represeents a
DefineNeutralFactorBuilder to define
neutral factor according to material and formula in the spreadsheet table. |
interface |
DesignTrimToolBuilder
Represents a builder to be used to create Mold Wizard design trim tool.
|
interface |
DieBaseBuilder
Represents Progressive Die Wizard and Engineering Die Wizard builder to manage die base.
|
interface |
DieDesDrawDieBuilder
Represents the Die Design draw die management builder, which is to create a draw die by selected
sheet body, curve and base plane.
|
interface |
DieDesDrawPunchBuilder
Die Design draw punch management builder, create a draw die punch by selected sheet body, curve
and base plane.
|
interface |
DieDesignLowerBinderBuilder
Represents a Lower Binder builder
To create a new instance of this class, use AutoDieCollection.createDieDesignLowerBinderBuilder(nxopen.features.Feature) Created in NX9.0.0 |
interface |
DieDesignSettingBuilder
Represents a
DieDesignSettingBuilder
This class is for Die Design Setting UI
To create a new instance of this class, use DieDesignSettingCollection.createDieDesignSettingBuilder() Created in NX7.5.0 |
interface |
DieDesignTrimPostBuilder
Represents a Trim Post builder
To create a new instance of this class, use AutoDieCollection.createDieDesignTrimPostBuilder(nxopen.features.Feature) Created in NX9.0.0 |
interface |
DieDesPierceInsertBuilder
Represents Die Design Pierce Insert builder.
|
interface |
DieEngProcessUpdateManagerBuilder
Die Engineer process update manager management builder.
|
interface |
DieEngTrimAngleCheck
Represents a die engineering trim angle check analysis object
To create or edit an instance of this class, use DieEngTrimAngleCheckBuilder Created in NX8.5.0 |
interface |
DieEngTrimAngleCheckBuilder
Represents a Trim Angle Check builder
To create a new instance of this class, use AutoDieCollection.createDieEngTrimAngleCheckBuilder(nxopen.geometricanalysis.AnalysisObject) Default values. |
interface |
DirectUnbendBuilder
The builder contains all inputs for direct unbend.
|
interface |
DirectUnfoldBuilder
The builder contains all inputs for direct unfolding.
|
interface |
DrawingSheetNameBuilder
Represents a
DrawingSheetNameBuilder To create a new instance of this class, use ToolingDrawingCollection.createDrawingSheetNameBuilder() Created in NX8.5.0 |
interface |
EdgePatchBuilder
Represents a builder to be used to create edge patch surfaces.
|
interface |
EjectorPostProcessingBuilder
Represents a builder to be used to create Mold Wizard ejector post processing.
|
interface |
ElectrodeBlankBuilder
Design electrode blank builder to create an electrode blank for the selected body.
|
interface |
ElectrodeCheckingBuilder
Electrode Checking builder to check the touch status of all electrode.
|
interface |
ElectrodeComponentBuilder
Electrode component builder to install holder and pallet.
|
interface |
ElectrodeCopyBuilder
The ElectrodeCopy builder
To create a new instance of this class, use ElectrodeCopyCollection.createElectrodeCopyBuilder() Default values. |
interface |
ElectrodeDeleteBuilder
Electrode delete component builder to remove blank, pallet and holder from assembly.
|
interface |
ElectrodeDesign
Represents an Electrode Design.
|
interface |
ElectrodeInitializationBuilder
Electrode initialize project builder to creates an electrode design assembly.
|
interface |
EnlargeSurfaceBuilder
Mold Wizard enlarge surface management builder, trims a enlarged surface to a boundary of edges,
curves, datum planes or faces.
|
interface |
EWDraftingBuilder
Represents the drafting builder which is used to create electrode drafting.
|
interface |
EWMultiPositionBuilder
Represents the multiple position builder which is used to get transformed electrode heads together.
|
interface |
FaceAttributeBuilder
Represents a builder to be used to create face attribute.
|
interface |
FaceColorManagementBuilder
Tooling builder to assign and edit color of objects
To create a new instance of this class, use FaceColorManagementCollection.createFaceColorManagementBuilder() Default values. |
interface |
FaceSplitBuilder
Represents a face split operation
To create a new instance of this class, use FaceSplitCollection.createFaceSplitBuilder() Default values. |
interface |
FamilyMoldBuilder
Creates a Mold Wizard Family Mold builder
To create a new instance of this class, use FamilyMoldCollection.createFamilyMoldBuilder() Created in NX6.0.0 |
interface |
FastenerAssemConfigBuilder
Represents a Fastener Assem Config Collection.
|
interface |
FastenerAssy
Represents a
FastenerAssy
To create a new instance of this class, use FastenerAssyCollection.createBuilder() Created in NX5.0.0 |
interface |
FastenerAssyCustomizationBuilder
Fastener assembly customization builder.
|
interface |
FlowAnalysisBuilder
Represents the builder which is used to create flow analysis.
|
interface |
FlowDisplayBuilder
Represents the builder which is used to create flow analysis.
|
interface |
ForceCalculationBuilder
Represents a
ForceCalculationBuilder
Force Calculation Design is to calculate force of process
To create a new instance of this class, use ForceCalculationCollection.createForceCalculationBuilder() Default values. |
interface |
FormingInsertBuilder
Progressive Die Wizard builder to design forming punch and die insert
To create a new instance of this class, use FormingInsertCollection.createFormingInsertBuilder() Default values. |
interface |
GeneralInsertBuilder
General Insert Design Builder of PDW and EDW.
|
interface |
GuidedExtensionBuilder
Builder for creating Guided Extension surface in NX
To create a new instance of this class, use GuidedExtensionManager.createBuilder() Default values. |
interface |
HemFixerBuilder
Hem Fixer Builder of PDW and EDW.
|
interface |
HoleManufacturingNoteBuilder
Tooling builder for HoleManufacturingNote
To create a new instance of this class, use HoleManufacturingNoteCollection.createHoleManufacturingNoteBuilder() Default values. |
interface |
InitProjBuilder
Represents a
InitProjBuilder
To create a new instance of this class, use InitProjCollection.createInitProjBuilder() Default values. |
interface |
InitProjectBuilder
Mold Wizard initialize project builder
To create a new instance of this class, use InitProjectCollection.createBuilder() Default values. |
interface |
InsertAuxiliaryBuilder
PDW insert auxiliary builder to design various auxiliaries of insert group
To create a new instance of this class, use InsertAuxiliaryCollection.createInsertAuxiliaryBuilder() Default values. |
interface |
IntermediateStageBuilder
Represents a
IntermediateStageBuilder builder. |
interface |
LayoutBuilder
Represents a Tooling::LayoutBuilder builder
To create a new instance of this class, use MWLayoutCollection.createLayoutBuilder() Default values. |
interface |
LayoutManagementBuilder
Layout Management Builder of Engineering Die Wizard
To create a new instance of this class, use LayoutManagementCollection.createLayoutManagementBuilder() Default values. |
interface |
LayoutRepositionBuilder
Represents a Tooling::LayoutRepositionBuilder builder
To create a new instance of this class, use MWLayoutCollection.createLayoutRepositionBuilder() Default values. |
interface |
LsdynaFormAnalysisResultDisplayBuilder
Represents a Ly-Dyna Formability Analysis - Result Display builder
To create a new instance of this class, use AutoDieCollection.createLsdynaFormAnalysisResultDisplayBuilder() Default values. |
interface |
LsdynaGeometryPreparationBuilder
Stamping Die LS-Dyna integration draw geometry preprare builder.
|
interface |
LsdynaKfileGeneratorBuilder
Represents LS-Dyna K file builder - K file generator builder
To create a new instance of this class, use AutoDieCollection.createLsdynaKfileGeneratorBuilder() Default values. |
interface |
ManufacturingGeometryBuilder
Represents a builder to be used to create manufacturing geometry.
|
interface |
MoldCsysBuilder
Mold Wizard MoldCsys project builder
To create a new instance of this class, use MoldCsysCollection.createMoldCsysBuilder() Default values. |
interface |
MoldDesign
Represents an Mold Design.
|
interface |
MoldInsertBuilder
Mold Wizard mold insert management builder
To create a new instance of this class, use MoldInsertCollection.createMoldInsertBuilder() Default values. |
interface |
MoldProcessBuilder
Represents a Tooling::MoldProcessBuilder builder
To create a new instance of this class, use MoldProcessCollection.createMoldProcessBuilder() Default values. |
interface |
MotionSimulationBuilder
Represents a
MotionSimulationBuilder to support dynamic interference check. |
interface |
MWCopySheetsBuilder
Builder for copying sheets in the Mold Wizard application
To create a new instance of this class, use MWCopySheetsCollection.createBuilder() Default values. |
interface |
MWDefineRegionsBuilder
The MWDefineRegions builder
To create a new instance of this class, use MWDefineRegionsCollection.createBuilder() Default values. |
interface |
MWDefineSheetsBuilder
Builder for defining sheets in Mold Wizard
To create a new instance of this class, use MWDefineSheetsCollection.createBuilder() Default values. |
interface |
MWDesignGuideLinesBuilder
The builder for designing guide lines in Mold Wizard.
|
interface |
MWDesignPartingSurfaceBuilder
The builder for designing parting surface in Mold Wizard.
|
interface |
MWMoldedPartValidationBuilder
Represents a builder to be used to perform Molded Part Validation analysis.
|
interface |
MWPartingManagerBuilder
Builder for the Parting Manager in the Mold Wizard application
To create a new instance of this class, use MWPartingManagerCollection.createBuilder() Created in NX7.5.0 |
interface |
MWSearchRegionBuilder
The Search Region builder is for defining a region by searching the region faces given a set of seed faces and boundary edges.
|
interface |
MWTraversePartingLinesBuilder
Builder for creating parting lines by traversing in the Mold Wizard application
To create a new instance of this class, use MWTraversePartingLinesCollection.createBuilder() Created in NX7.5.0 |
interface |
ObjectAttributeManagementBuilder
Tooling builder to assign and edit attributes of objects
To create a new instance of this class, use ObjectAttributeManagementCollection.createObjectAttributeManagementBuilder() Default values. |
interface |
OffsetCurve3DBuilder
Deprecated.
Deprecated in NX10.0.0. Please use
Offset3DCurveBuilder instead
|
interface |
PiercingInsertBuilder
Represents piercing insert builder.
|
interface |
PocketBuilder
Mold Wizard pocket management builder
To create a new instance of this class, use PocketCollection.createPocketBuilder() Created in NX6.0.0 |
interface |
ProfileSplitBuilder
The ProfileSplit builder
To create a new instance of this class, use ProfileSplitCollection.createProfileSplitBuilder() Created in NX6.0.0 |
interface |
QuickQuotationBuilder
Progressive Die Wizard builder to create quick quotation.
|
interface |
ReferenceBlendBuilder
The ReferenceBlend builder
To create a new instance of this class, use ReferenceBlendCollection.createReferenceBlendBuilder() Created in NX7.0.0 |
interface |
ReliefDesignBuilder
Represents a
ReliefDesignBuilder
Relief Design is to cut relief pocket for forming region . |
interface |
RemoveHolesBuilder
Remove Hole is used to patch holes for a solid body.
|
interface |
ReplaceSolidBuilder
Represents a replace solid operation.
|
interface |
ReusableObjectPasteBuilder
Represents a
ReusableObjectPasteBuilder Use the ReusableObjectManager class to create a ReusableObjectPasteBuilder. |
interface |
ReusablePocketBuilder
Reusable pocket builder.
|
interface |
RunnerBuilder
Mold Wizard runner management builder, select curves as runner guide, choose section type and edit
section parameters, optional choose boolean type to create runner channel.
|
interface |
RunSimulationBuilder
Represents a
RunSimulationBuilder to animate the model,
analyze the collision and reference. null is returned To create a new instance of this class, use ProgressiveDieManager.createRunSimulationBuilder() Default values. |
interface |
ScrapDesignBuilder
Represents a scrap design builder
To create a new instance of this class, use ScrapDesignCollection.createScrapDesignBuilder() Default values. |
interface |
SectionLineCreationBuilder
Represents a
SectionLineCreationBuilder which is
used to create or edit the section line creation. |
interface |
SelectReuseLibraryItemBuilder
Select a part from the reuse library .
|
interface |
SelectReuseLibraryListBuilder
Select a list of objects from the reuse library .
|
interface |
SelectReuseLibraryListItemBuilder
Select reuse library list item .
|
interface |
SelectReuseLibraryListItemBuilderList
Represents a list of objects.
|
interface |
ShimBuilder
Shim Builder of PDW and EDW.
|
interface |
ShimInnerProfileSetBuilder
This is a seed block of set list.
|
interface |
ShimInnerProfileSetBuilderList
Represents a list of objects.
|
interface |
SlugRetentionBuilder
Represents a
SlugRetentionBuilder which is used to create the Slug Retention. |
interface |
SolidPatchBuilder
Represents a builder to be used to create a solid patch.
|
interface |
SpecifyBaffleBuilder
Represents a builder to be used to create specify baffle.
|
interface |
SpecifyCircuitBuilder
Represents a builder to be used to create specify circuit.
|
interface |
SplitSolidBuilder
Represents a builder to be used to split a solid with geometry tools.
|
interface |
StandardPartBuilder
Represents a builder to be used to create Mold Wizard Standard Part.
|
interface |
StandardPartPositionBuilder
Represents a StandardPartPositionBuilder to add or edit a standard part in the selected plane with specified position.
|
interface |
StripLayoutBuilder
Represents a
StripLayoutBuilder
This class is for Strip Layout Design UI
To create a new instance of this class, use StripLayoutCollection.createStripLayoutBuilder() Created in NX6.0.0 |
interface |
StripLayoutStationInformationBuilder
Strip Layout Process Description Builder of Tooling.
|
interface |
StripperVentingBuilder
Stripper Venting Builder of PDW and EDW.
|
interface |
SubInsertBuilder
The SubInsert builder
To create a new instance of this class, use SubInsertCollection.createSubInsertBuilder() Default values. |
interface |
TraverseLoopBuilder
The builder class for Traverse Loop component which assists you
to select or traverse a string of adjacent curves or edges.
|
interface |
TrimMoldComponentsBuilder
Represents a builder to be used to create Mold Wizard trim mold components.
|
interface |
TrimRegionBuilder
Mold Wizard trim region management builder, trims a body to a boundary of edges, curves or bodies.
|
interface |
TrimSolidBuilder
Mold Wizard trim solid management builder, trims bounding box body with region, subtract
bounding box with workpiece or keep region and box.
|
interface |
UnfoldingSimulationBuilder
Unfolding Simulation Builder of PDW and EDW.
|
interface |
UnusedFileManagementBuilder
Represents a
UnusedFileManagementBuilder
Unused File Management is to manage the unused files of the project. |
interface |
ValidCheckBuilder
This is the JA builder for static interference check
To create a new instance of this class, use ValidCheckCollection.createValidCheckBuilder() Default values. |
interface |
WallThicknessCheckerBuilder
Represents a builder to be used to perform wall thickness analysis.
|
interface |
WireHoleBuilder
Represents a
WireHoleBuilder
This class is for Wire Hole Design UI
To create a new instance of this class, use WireHoleCollection.createWireHoleBuilder() Default values. |
interface |
WorkpieceBuilder
Mold Wizard work piece builder
To create a new instance of this class, use WorkpieceCollection.createWorkpieceBuilder() Default values. |
Modifier and Type | Method and Description |
---|---|
TaggedObject |
BlankGeneratorBuilder.blankPart()
Returns the part containing a blank.
|
TaggedObject |
ElectrodeInitializationBuilder.createMsetPart(CloneObject cloneObject)
Creates the mset part.
|
TaggedObject |
FormingInsertBuilder.createNewComponent(TaggedObject parentTag,
Point3d origin)
Create new component.
|
TaggedObject |
BurringInsertBuilder.createNewComponent(TaggedObject parentTag,
Point3d origin)
Create new component.
|
TaggedObject |
ReferenceBlendBuilder.createReferenceBlend()
Create reference blend
License requirements: None. |
TaggedObject |
ElectrodeInitializationBuilder.createWorkingPart(CloneObject cloneObject,
TaggedObject msetPartTag)
Creates the working part.
|
TaggedObject |
ElectrodeInitializationBuilder.currentMset()
Returns the machine set part which is the working part.
|
TaggedObject |
BlankGeneratorBuilder.displayPartImport()
Returns the display part needed while importing blank.
|
TaggedObject |
BlankGeneratorBuilder.displayPartSelect()
Returns the display part needed while selecting a blank .
|
TaggedObject |
ElectrodeInitializationBuilder.getWorkingPart(TaggedObject msetPartTag)
Gets the working part in mset.
|
TaggedObject |
BlankGeneratorBuilder.insertNewBlank()
Returns the new inserted blank.
|
TaggedObject |
ElectrodeBlankBuilder.msetPart()
Returns the current machine set under which a blank is added.
|
TaggedObject |
ElectrodeBlankBuilder.multiPositionBuilder()
Returns the multi position builder.
|
TaggedObject |
ElectrodeBlankBuilder.reusablePartBuilder()
Returns the reusable part builder.
|
TaggedObject |
BlankGeneratorBuilder.workPart()
Returns the work part needed while creating blank.
|
Modifier and Type | Method and Description |
---|---|
void |
MWDefineRegionsBuilder.changeEntitiesColor(TaggedObject[] entities,
int color)
Change the color of displayable entities
License requirements: None. |
TaggedObject |
FormingInsertBuilder.createNewComponent(TaggedObject parentTag,
Point3d origin)
Create new component.
|
TaggedObject |
BurringInsertBuilder.createNewComponent(TaggedObject parentTag,
Point3d origin)
Create new component.
|
TaggedObject |
ElectrodeInitializationBuilder.createWorkingPart(CloneObject cloneObject,
TaggedObject msetPartTag)
Creates the working part.
|
TaggedObject |
ElectrodeInitializationBuilder.getWorkingPart(TaggedObject msetPartTag)
Gets the working part in mset.
|
void |
ElectrodeInitializationBuilder.initLinkObjects(TaggedObject workingPartTag)
Links the selected objects to the working component of Electrode assembly.
|
void |
BlankGeneratorBuilder.setBlankPart(TaggedObject blankTag)
License requirements: None. |
void |
ElectrodeInitializationBuilder.setCurrentMset(TaggedObject mset)
License requirements: nx_electrode_wizard ("NX Electrode Wizard") . |
void |
BlankGeneratorBuilder.setDisplayPartImport(TaggedObject displayPartTag)
License requirements: None. |
void |
BlankGeneratorBuilder.setDisplayPartSelect(TaggedObject displayPartTag)
License requirements: None. |
void |
BlankGeneratorBuilder.setInsertNewBlank(TaggedObject blankTag)
License requirements: None. |
void |
ElectrodeBlankBuilder.setMsetPart(TaggedObject mset)
License requirements: nx_electrode_wizard ("NX Electrode Wizard") . |
void |
ElectrodeBlankBuilder.setMultiPositionBuilder(TaggedObject builderTag)
License requirements: nx_electrode_wizard ("NX Electrode Wizard") . |
void |
ElectrodeBlankBuilder.setReusablePartBuilder(TaggedObject builderTag)
License requirements: nx_electrode_wizard ("NX Electrode Wizard") . |
void |
BlankGeneratorBuilder.setWorkPart(TaggedObject workPart)
License requirements: None. |
void |
MWDefineRegionsBuilder.updateUnsewnBodiesNameAttribute(TaggedObject unsewFeatureTag,
Face[] cavityFaces)
Update name attribute for the unsew bodies of the cavity and core regions
License requirements: None. |
Modifier and Type | Interface and Description |
---|---|
interface |
UserDefinedObject
JA interface for the UserDefinedObject object .
|
Modifier and Type | Field and Description |
---|---|
TaggedObject |
UserDefinedObject.LinkDefinition.associatedObject
linked object
|
Modifier and Type | Method and Description |
---|---|
TaggedObject |
UserDefinedLinkEvent.associatedObject()
Returns the associated object.
|
Modifier and Type | Method and Description |
---|---|
UserDefinedObjectManager.LinkedUdoDefinition[] |
UserDefinedObjectManager.getLinksToObject(TaggedObject linkObject)
Queries an NX Object to find all
UserDefinedObjects.UserDefinedObject 's that are linked to the given NXObject (note this will not find owning udos)
License requirements: None. |
UserDefinedObject |
UserDefinedObjectManager.getOwningUserDefinedObject(TaggedObject linkObject)
Queries an NX Object to find the
UserDefinedObjects.UserDefinedObject that owns the given NXObject (note this will return null for the owning udo if the object is not owned)
License requirements: None. |
boolean |
UserDefinedObjectManager.isObjectLinkable(TaggedObject linkObject,
UserDefinedObject.LinkType linkType)
Queries an NX Object to see if it can be linked to a
UserDefinedObjects.UserDefinedObject via the given link type
License requirements: None. |
boolean |
UserDefinedObjectManager.isObjectLinkedToUserDefinedObject(TaggedObject linkObject)
Queries an NX Object to see if it is linked to a
UserDefinedObjects.UserDefinedObject (note this will not
tell you if the object is owned by a UDO with an owning link)
License requirements: None. |
boolean |
UserDefinedObjectManager.isObjectOwnedByUserDefinedObject(TaggedObject linkObject)
Queries an NX Object to see if it is owned by a
UserDefinedObjects.UserDefinedObject
License requirements: None. |
Constructor and Description |
---|
LinkDefinition(TaggedObject associatedObjectInitial,
UserDefinedObject.LinkStatus statusInitial)
Constructor for the LinkDefinition object.
|
Modifier and Type | Interface and Description |
---|---|
interface |
Instantiation
Represents an User Defined Template Instantiation object
To create or edit an instance of this class, use InstantiationBuilder Created in NX10.0.0 |
interface |
InstantiationBuilder
Represents a
InstantiationBuilder
To create a new instance of this class, use Collection.createInstantiationBuilder(nxopen.userdefinedtemplate.Instantiation) Created in NX10.0.0 |
Modifier and Type | Method and Description |
---|---|
TaggedObject |
Collection.findObject(String journalIdentifier)
Find the Product Interface Object with input name
License requirements: None. |
Modifier and Type | Interface and Description |
---|---|
interface |
Override
Represents a
Override object. |
interface |
OverrideBuilder
Represents a
Override builder To create a new instance of this class, use ResultObject.createOverrideBuilder(nxopen.validate.Override) Default values. |
interface |
Parser
Represents a NX
Parser . |
interface |
Requirement
Represents a
Requirement object. |
interface |
RequirementBuilder
Represents a
Requirement builder To create a new instance of this class, use RequirementCollection.createRequirementBuilder(nxopen.validate.Requirement) Default values. |
interface |
RequirementCheck
Represents an NX
RequirementCheck object. |
interface |
ResultObject
Represents a check-mate result object.
|
interface |
Validator
Represents a NX
Validator . |
interface |
ValidatorOptions
Contains information about run options of check-mate checking process.
|
Modifier and Type | Interface and Description |
---|---|
interface |
Classifier
A Classifier within a
Rule . |
interface |
Condition
A Condition within a
Rule . |
interface |
GroupLabel
A group label corresponds to a group of objects in the results of an applied
nxopen.visualreporting.VisualReport . |
interface |
Property
|
interface |
ResultCategory
A result category within a
nxopen.visualreporting.VisualReport . |
interface |
Rule
A rule within a
nxopen.visualreporting.VisualReport . |
interface |
SpecifyDateBuilder
Represents a Specify Date Builder
To create a new instance of this class, use VisualReportManager.createSpecifyDateBuilder() Created in NX8.0.0 |
interface |
UnmatchedResultCategory
An unmatched result category within a
nxopen.visualreporting.VisualReport . |
Modifier and Type | Interface and Description |
---|---|
interface |
AutoPointBuilder
Represents a
AutoPointBuilder builder To create a new instance of this class, use WeldManager.createAutoPointBuilder(nxopen.features.Feature) Default values. |
interface |
AutoWeldSymbolsBuilder
Represents a
AutoWeldSymbolsBuilder builder To create a new instance of this class, use WeldManager.createAutoWeldSymbolsBuilder() Created in NX8.0.0 |
interface |
CharacteristicsBuilder
This builder allows you to define the attribute values to be set on the
output of the weld feature.
|
interface |
CharacteristicsSelectionBuilder
This builder allows you to define the attribute values to be set on the
output of the weld feature.
|
interface |
CharacteristicsValueBuilder
The object containing the information about the attribute to be
placed on the output of the weld feature.
|
interface |
ConnectedFaceFinderBuilder
Represents a builder to run the Connected Face Finder operation.
|
interface |
ConnectionFinderBuilder
Represents a builder to display, manage, delete, and allow the user to
reparent face information for the weld objects.
|
interface |
DatumCommonBuilder
Used to create or edit a
DatumSurface or DatumPin feature. |
interface |
DatumIconBuilder
Represents a
DatumIconBuilder class used to control the part navigator icon for Datum Pin and Surface Locators. |
interface |
DatumPinBuilder
Used to create or edit a
DatumPin feature. |
interface |
DatumSurfaceBuilder
Used to create or edit a
DatumSurface feature. |
interface |
EasyPatternBuilder
Represents the easy pattern builder.
|
interface |
EdgePrepBuilder
A builder used to create or edit a
EdgePrep feature. |
interface |
EdgePrepValuesBuilder
Used to view or edit the values used to define the welding joint and edge preparation.
|
interface |
ExportWeldBuilder
Represents a ExportWeldBuilder class
To create a new instance of this class, use WeldManager.createExportWeldBuilder() Default values. |
interface |
ExportWeldJointBuilder
Represents exporting weld joints.
|
interface |
InformationBuilder
This class is used by "Fabrication Information" to output fabrication objects information.
|
interface |
JointExitBuilder
Used to set custom edge preparation parameters of a
WeldJoint feaure. |
interface |
JointItemBuilder
Used to create or edit a
Weld.WeldJoint feature. |
interface |
JointItemBuilderList
Represents a list of objects.
|
interface |
JointmarkFaceSetsBuilder
Used to create or edit a set of faces for Jointmark
To create a new instance of this class, use JointmarkBuilder.newFaceSets() Created in NX9.0.0 |
interface |
JointmarkFaceSetsBuilderList
Represents a list of objects.
|
interface |
JointmarkGuideBuilder
Used to create or edit a guide curve for Jointmark.
|
interface |
JointmarkGuideBuilderList
Represents a list of objects.
|
interface |
JointmarkPointsBuilder
Used to create or edit a point in the list of points for Jointmark
To create a new instance of this class, use JointmarkBuilder.newPoints() Created in NX9.0.0 |
interface |
JointmarkPointsBuilderList
Represents a list of objects.
|
interface |
PointMarkPointBuilder
Used to create or edit a point in the list of points for Jointmark
To create a new instance of this class, use PointMarkBuilder.newPointsOverride() Created in NX10.0.0 |
interface |
SelectDatumPin
Represents a single object selection.
|
interface |
SelectDatumSurface
Represents a single object selection.
|
interface |
StructureWeldBuilder
This class is used to create or edit the information shared among all Structure Weld builders.
|
interface |
SurfaceWeldBuilder
Use to create or edit a
SurfaceWeld feature. |
interface |
UserDefinedWeldBuilder
Represents a
UserDefinedWeldBuilder builder. |
interface |
WeldAdvisorBuilder
Represents a weld advisor test
To create a new instance of this class, use WeldManager.createWeldAdvisorBuilder() Created in NX7.5.0 |
interface |
WeldBeadBuilder
Used to create or edit a
WeldBead feature. |
interface |
WeldBeadPathBuilder
Represents the path the bead shape will be swept along.
|
interface |
WeldBeadPathBuilderList
Represents a list of objects.
|
interface |
WeldBeadSizeBuilderList
Represents a list of objects.
|
interface |
WeldFillBuilder
A builder used to create or edit a
Fill feature. |
interface |
WeldFillStripBuilder
A builder used to create or edit a single strip of the
WeldFillBuilder . |
interface |
WeldFillStripBuilderList
Represents a list of objects.
|
interface |
WeldJointBuilder
Used to create or edit a
WeldJoint feature. |
interface |
WeldLabelBuilder
Create weld labels for multiple welds and BIW locators, this builder's Commit can produce more than one object,
the GetCommittedObjects can be used to get the objects and the order of GetCommittedObject's output array is stable.
|
interface |
WeldObjectBuilder
Represents a
WeldObjectBuilder class used to collect welding objects created or edited from a command. |
interface |
WeldPmiBuilder
Create PMI symbols for multiple structure welds, this builder's Commit can produce more than one object,
the GetCommittedObjects can be used to get the objects and the order of GetCommittedObject's output array is stable.
|
interface |
WeldPointBuilder
Represents a Spot Weld feature
To create a new instance of this class, use WeldManager.createWeldPointBuilder(nxopen.features.Feature) Default values. |
interface |
WeldPointExitBuilder
Represents a
WeldPointExitBuilder class used to pass welding object from the Weld Point command to a user callback. |
interface |
WeldPreferenceBuilder
Represents a
WeldPreferenceBuilder builder To create a new instance of this class, use WeldManager.createPreferenceBuilder() Default values. |
Modifier and Type | Field and Description |
---|---|
TaggedObject |
LogInfo.entity
weld object
|
Modifier and Type | Method and Description |
---|---|
TaggedObject[] |
WeldAdvisorBuilder.getObjects()
Gets the objects to be checked
License requirements: ugweld ("UG WELD") . |
Modifier and Type | Method and Description |
---|---|
void |
WeldAdvisorBuilder.deleteFeaturesFromResult(TaggedObject[] objects)
Delete the features from the check result
License requirements: ugweld ("UG WELD") . |
LogInfo[] |
WeldAdvisorBuilder.getReferenceObjects(TaggedObject weldObject,
WeldAdvisorCheckerType checker)
The objects that failed weld objects referenced
License requirements: ugweld ("UG WELD") . |
void |
WeldPointBuilder.setMirrorTranslateReferenceObjects(TaggedObject[] refs)
Add or remove mirror translate reference objects
License requirements: ugweld ("UG WELD") . |
void |
WeldAdvisorBuilder.setObjects(TaggedObject[] objects)
Sets the objects to be checked
License requirements: ugweld ("UG WELD") . |
Constructor and Description |
---|
LogInfo(TaggedObject entityInitial,
String logMessageInitial)
Constructor for the LogInfo object.
|
Copyright 2011 Siemens Product Lifecycle Management Software Inc. All Rights Reserved.