public interface PlanarMillingBuilder extends PlanarOperationBuilder
OperationCollection.createPlanarMillingBuilder(nxopen.cam.CAMObject)
PlanarOperationBuilder.AutomaticPartBoundaryMethodTypes
OperationBuilder.HoleAxisTypes, OperationBuilder.HoleDepthTypes, OperationBuilder.OptimizationBasedOnTypes, OperationBuilder.OptimizationDistanceTypes, OperationBuilder.OptimizationLevelTypes
ParamBuilder.OptimizationTypes
Modifier and Type | Method and Description |
---|---|
CutLevelPlanar |
cutLevel()
Returns the Planar Mill Cut Level builder
License requirements: None. |
int |
drivePoint()
Returns the drive point
License requirements: None. |
MultiplePassesBuilder |
multiplePasses()
Returns the Multiple Passes builder
License requirements: None. |
boolean |
save2dIpw()
Returns the Save 2D In-Process Workpiece
License requirements: None. |
void |
setDrivePoint(int drivePoint)
License requirements: cam_base ("CAM BASE") . |
void |
setDrivePointSpecified(boolean drivePointSpecified)
The drive point specified flag
License requirements: None. |
void |
setSave2dIpw(boolean saveMethod)
License requirements: cam_base ("CAM BASE") . |
void |
setZdepthOffset(double offset)
License requirements: cam_base ("CAM BASE") . |
Geometry |
wallGeometry()
Returns the wall geometry builder
License requirements: None. |
double |
zdepthOffset()
Returns the Z-Depth Offset
License requirements: None. |
additionalPasses, automaticPartBoundaryMethod, bndStepover, checkGeometry, cornerLoops, cutAreaGeometry, cutPattern, deferCuttingStatus, depthPerCut, nonCuttingBuilder, partGeometry, setAdditionalPasses, setAutomaticPartBoundaryMethod, setCornerLoops, setDeferCuttingStatus, setToolMinimumLengthUsage, toolAxisFix, toolMinimumLengthUsage
cutParameters, feedsBuilder, minCutLength, motionOutput, referenceTool, setReferenceTool
channelName, description, endOfPath, endUdeSet, geometry, getHoleAxisValues, gougeChecking, holeAxisType, holeDepth, holeDepthType, layoutAndLayer, motionOutputBuilder, notes, optimizationBasedOn, optimizationDistanceMethod, optimizationLevel, pathDisplayOptions, retractDistance, retractDistanceOnToolAxisChange, safeClearance, selectToolFlag, setChannelName, setDescription, setGougeChecking, setHoleAxisType, setHoleAxisValues, setHoleDepthType, setOptimizationBasedOn, setOptimizationDistanceMethod, setOptimizationLevel, setSelectToolFlag, startOfPath, startUdeSet, toolChangeSetting, toolPathSplitParametersBuilder
cycleEvent, cycleTable, optimizationMethod, setOptimizationMethod
commit, destroy, getCommittedObjects, getObject, showResults
printTestData, printTestData, tag, tagValue
validate
boolean save2dIpw() throws NXException, RemoteException
NXException
RemoteException
void setSave2dIpw(boolean saveMethod) throws NXException, RemoteException
saveMethod
- The In-Process Workpiece Save Method valueNXException
RemoteException
int drivePoint() throws NXException, RemoteException
NXException
RemoteException
void setDrivePoint(int drivePoint) throws NXException, RemoteException
drivePoint
- The drive point valueNXException
RemoteException
double zdepthOffset() throws NXException, RemoteException
NXException
RemoteException
void setZdepthOffset(double offset) throws NXException, RemoteException
offset
- NXException
RemoteException
MultiplePassesBuilder multiplePasses() throws NXException, RemoteException
NXException
RemoteException
CutLevelPlanar cutLevel() throws NXException, RemoteException
NXException
RemoteException
Geometry wallGeometry() throws NXException, RemoteException
NXException
RemoteException
void setDrivePointSpecified(boolean drivePointSpecified) throws NXException, RemoteException
drivePointSpecified
- if specify drive pointNXException
RemoteException
Copyright 2011 Siemens Product Lifecycle Management Software Inc. All Rights Reserved.