FeatureCollection Class¶

class NXOpen.Features.FeatureCollection¶

Bases: object

Represents a collection of features

To obtain an instance of this class, refer to NXOpen.Part

New in version NX3.0.0.

Properties¶

Property	Description
ActiveGroup	Returns the active feature group.

Methods¶

Method	Description
ConvertToFloatingFeatureGroups	Converts sequential feature groups to floating feature groups
ConvertToNewFeatureGroups	Converts to new feature groups
ConvertToSequentialFeatureGroups	Converts floating feature groups to sequential feature groups
CreateAdaptiveShellBuilder	Creates a `NXOpen.Features.AdaptiveShellBuilder` @return `NXOpen.Features.AdaptiveShellBuilder` object
CreateAdmMoveFaceBuilder	Creates a `NXOpen.Features.AdmMoveFaceBuilder` @return
CreateAdmOffsetRegionBuilder	Creates a `NXOpen.Features.AdmOffsetRegionBuilder` @return Features.
CreateAdmResizeFaceBuilder	Creates a `NXOpen.Features.AdmResizeFaceBuilder` @return
CreateAestheticFaceBlendBuilder	Creates a `NXOpen.Features.AestheticFaceBlendBuilder` @return
CreateAnalyzePocketBuilder	Creates a `NXOpen.Features.AnalyzePocketBuilder` @return AnalyzePocketBuilder object
CreateAngularDimensionBuilder	Creates a `NXOpen.Features.AngularDimBuilder` @return
CreateAocsBuilder	Creates an Offset In Face builder @return AOCSBuilder object
CreateAssemblyCutBuilder	Creates a `NXOpen.Features.AssemblyCutBuilder` @return Features.
CreateBlendPocketBuilder	Creates a `NXOpen.Features.BlendPocketBuilder` @return BlendPocketBuilder object
CreateBlockFeatureBuilder	Creates a Block feature builder @return BlockFeatureBuilder object
CreateBooleanBuilder	Creates a Boolean builder @return BooleanBuilder object
CreateBooleanBuilderUsingCollector	Creates a Boolean builder.
CreateBoundedPlaneBuilder	Creates a `NXOpen.Features.BoundedPlaneBuilder` @return Features.
CreateBridgeCurveBuilder	Creates a `NXOpen.Features.BridgeCurveBuilder` @return
CreateBridgeCurveBuilderEx	Creates a `NXOpen.Features.BridgeCurveBuilderEx` @return
CreateBridgeSurfaceBuilder	Creates a `NXOpen.Features.BridgeSurfaceBuilder` @return
CreateChamferBuilder	Creates a Chamfer feature builder @return ChamferBuilder object
CreateChangeShellThicknessBuilder	Creates a `NXOpen.Features.ChangeShellThicknessBuilder` @return `NXOpen.Features.ChangeShellThicknessBuilder` object
CreateCircularBlendCurveBuilder	Creates a `NXOpen.Features.CircularBlendCurveBuilder` @return CircularBlendCurveBuilder object
CreateCoaxialBuilder	Creates a `NXOpen.Features.CoaxialBuilder` @return Features.
CreateColorFaceBuilder	Creates a `NXOpen.Features.ColorFaceBuilder` @return
CreateColorFeatureBuilder	Creates a `NXOpen.Features.ColorFeatureBuilder` @return
CreateColorFeatureGroupBuilder	Creates a `NXOpen.Features.ColorFeatureGroupBuilder` @return
CreateCombinedProjectionBuilder	Creates a `NXOpen.Features.CombinedProjectionBuilder` @return
CreateCompositeCurveBuilder	Creates a `NXOpen.Features.CompositeCurveBuilder` @return Features.
CreateConcaveFacesBuilder	Creates a `NXOpen.Features.ConcaveFacesBuilder` @return
CreateConeBuilder	Creates a `NXOpen.Features.ConeBuilder` @return
CreateConvertFeatureGroupsToModulesBuilder	Creates a `NXOpen.GeometricUtilities.ConvertFeatureGroupsToModulesBuilder` @return
CreateCoplanarBuilder	Creates a coplanar builder, don’t use it until nx6 @return Features.
CreateCopyFaceBuilder	Creates a copy face builder @return Features.
CreateCopyPasteBuilder	Creates a `NXOpen.Features.CopyPasteBuilder` @return CopyPasteBuilder
CreateCopyPasteBuilder2	Creates a `NXOpen.Features.CopyPasteBuilder` @return CopyPasteBuilder
CreateCurveOnSurfaceBuilder	Creates a Curve On Surface feature builder @return CurveOnSurfaceBuilder object
CreateCurvelengthBuilder	Creates a Curvelength builder @return CurveLengthBuilder object
CreateCutFaceBuilder	Creates a cut face builder @return Features.
CreateCylinderBuilder	Creates a `NXOpen.Features.CylinderBuilder` @return
CreateDatumAxisBuilder	Creates a Datum Axis feature builder @return DatumAxisBuilder object
CreateDatumCsysBuilder	Creates a Datum CSYS feature builder @return DatumCsysBuilder object
CreateDatumPlaneBuilder	Creates a Datum Plane feature builder @return DatumPlaneBuilder object
CreateDeleteBodyBuilder	Creates a `NXOpen.Features.DeleteBodyBuilder` @return DeleteBodyBuilder object
CreateDeleteEdgeBuilder	Creates a `NXOpen.Features.DeleteEdgeBuilder` @return
CreateDeleteFaceBuilder	Creates a delete face builder, don’t use it until nx502 @return Features.
CreateDividefaceBuilder	Creates a Divideface builder @return DividefaceBuilder object
CreateDraftBodyBuilder	Creates a `NXOpen.Features.DraftBodyBuilder` @return
CreateDraftBuilder	Creates a draft builder @return DraftBuilder object
CreateDraftingSplineBuilder	Creates a Studio Spline builder for drafting @return DraftingSplineBuilder object
CreateEdgeBlendBuilder	Creates a Edge Blend feature builder @return EdgeBlendBuilder object
CreateEdgeSymmetryBuilder	Creates a `NXOpen.Features.EdgeSymmetryBuilder` @return
CreateEditCrossSectionBuilder	Creates a `NXOpen.Features.EditCrossSectionBuilder` @return
CreateEditDimensionBuilder	Creates a `NXOpen.Features.EditDimensionBuilder` @return
CreateEmbossBodyBuilder	Creates a `NXOpen.Features.EmbossBodyBuilder` @return
CreateEmbossBuilder	Creates an Emboss builder @return EmbossBuilder object
CreateEnlargeBuilder	Creates an Enlarge builder @return EnlargeBuilder object
CreateExtensionBuilder	Creates a `NXOpen.Features.ExtensionBuilder` @return
CreateExtractFaceBuilder	Creates a `NXOpen.Features.ExtractFaceBuilder` @return Extract face builder object
CreateExtrudeBuilder	Creates a Extrude builder @return ExtrudeBuilder object
CreateFaceBlendBuilder	Creates a Face Blend feature builder @return FaceBlendBuilder object
CreateFeatureReplayBuilder	Creates a `NXOpen.Features.FeatureReplayBuilder` @return Features.
CreateFitCurveBuilder	Creates a `NXOpen.Features.FitCurveBuilder` @return
CreateFitSurfaceBuilder	Creates a `NXOpen.Features.FitSurfaceBuilder` @return
CreateFixedBuilder	Creates a `NXOpen.Features.FixedBuilder` @return
CreateFlowBlendBuilder	Creates a `Features.FlowBlendBuilder` @return
CreateFreeTransformerBuilder	Creates a `NXOpen.Features.FreeTransformerBuilder` @return
CreateGeneralConicBuilder	Creates a `NXOpen.Features.GeneralConicBuilder` @return
CreateGeomcopyBuilder	Creates a `NXOpen.Features.GeomcopyBuilder` @return
CreateGlobalShapingBuilder	Creates a `NXOpen.Features.GlobalShapingBuilder` @return
CreateGroupFaceBuilder	Creates a `NXOpen.Features.GroupFaceBuilder` @return
CreateGuidedExtensionBuilderEx	Creates a `NXOpen.Features.GuidedExtensionBuilderEx` @return
CreateHelixBuilder	Creates a `NXOpen.Features.HelixBuilder` @return
CreateHoleFeatureBuilder	Creates a Hole feature builder @return HoleFeatureBuilder object
CreateHolePackageBuilder	Creates a `NXOpen.Features.HolePackageBuilder` @return
CreateHoodVisibilityBuilder	Creates a `NXOpen.Features.VehicleDesign.HoodVisibilityBuilder` @return
CreateHumanBuilder	Creates a human feature builder.
CreateHumanPosturePredictionBuilder	Creates a human posture prediction builder.
CreateIformBuilder	Creates a `NXOpen.Features.IFormBuilder` @return
CreateInstanceFeatureBuilder	Creates `NXOpen.Features.InstanceFeatureBuilder` @return `NXOpen.Features.InstanceFeatureBuilder` object
CreateIntersectFeature	Creates an intersect feature.
CreateIntersectionCurveBuilder	Creates a `NXOpen.Features.IntersectionCurveBuilder` @return IntersectionCurveBuilder object
CreateIsolateFeatureBuilder	Creates a `NXOpen.Features.IsolateFeatureBuilder` @return
CreateIsoparametricCurvesBuilder	Creates a `NXOpen.Features.IsoparametricCurvesBuilder` @return
CreateJoinCurvesBuilder	Creates a `NXOpen.Features.JoinCurvesBuilder` @return JoinCurvesBuilder object
CreateLabelChamferBuilder	Creates a `NXOpen.Features.LabelChamferBuilder` @return
CreateLabelNotchBlendBuilder	Creates a `NXOpen.Features.LabelNotchBlendBuilder` @return
CreateLawCurveBuilder	Creates a `NXOpen.Features.LawCurveBuilder` @return
CreateLawExtensionBuilder	Creates a `NXOpen.Features.LawExtensionBuilder` @return
CreateLawExtensionBuilderEx	Creates a `NXOpen.Features.LawExtensionBuilderEx` @return
CreateLinearDimensionBuilder	Creates a `NXOpen.Features.LinearDimensionBuilder` @return
CreateLinkedFacetBuilder	Creates a `NXOpen.Features.LinkedFacetBuilder` @return
CreateMakeOffsetBuilder	Creates a `NXOpen.Features.MakeOffsetBuilder` @return
CreateMapleBuilder	Creates a `NXOpen.Features.MapleBuilder` @return
CreateMasterCutBuilder	Create a Master Cut builder @return
CreateMatchEdgeBuilder	Creates a `NXOpen.Features.MatchEdgeBuilder` @return
CreateMeshSurfaceBuilder	Creates a Mesh Surface feature builder @return MeshSurfaceBuilder object
CreateMeshTransformerBuilder	Creates a `NXOpen.Features.MeshTransformerBuilder` @return
CreateMidSurfaceByFacePairsBuilder	Creates a `NXOpen.Features.MidSurfaceByFacePairsBuilder` @return
CreateMidSurfaceUserDefinedBuilder	Creates a `NXOpen.Features.MidSurfaceUserDefinedBuilder` @return
CreateMirrorBodyBuilder	Creates a `NXOpen.Features.MirrorBodyBuilder` @return MirrorBodyBuilder object
CreateMirrorBuilder	Creates `NXOpen.Features.MirrorBuilder` @return `NXOpen.Features.MirrorBuilder` object
CreateMirrorCurveBuilder	Creates a `NXOpen.Features.MirrorCurveBuilder` @return
CreateMirrorFaceBuilder	Creates a mirror face builder @return Features.
CreateMirrorFeatureBuilder	Creates `NXOpen.Features.MirrorFeatureBuilder` @return MirrorFeatureBuilder object
CreateMoveFaceBuilder	Create a move face builder, don’t use it until nx502 @return Features.
CreateNSidedSurfaceBuilder	Creates a `NXOpen.Features.NSidedSurfaceBuilder` @return
CreateNestModuleBuilder	Creates a `NXOpen.GeometricUtilities.NestModuleBuilder`
CreateOffsetCurveBuilder	Creates a `NXOpen.Features.OffsetCurveBuilder` @return Offset Curve Builder object
CreateOffsetEmbossBuilder	Creates a Offsetemboss builder @return OffsetEmbossBuilder object
CreateOffsetFaceBuilder	Creates a `NXOpen.Features.OffsetFaceBuilder` @return OffsetFaceBuilder object
CreateOffsetRegionBuilder	Creates an offset region builder, don’t use it until nx502 @return Features.
CreateOffsetSurfaceBuilder	Creates an Offset Surface builder @return OffsetSurfaceBuilder object
CreateOptimizeCurveBuilder	Creates a `NXOpen.Features.OptimizeCurveBuilder` @return OptimizeCurveBuilder object
CreateOptimizeFaceBuilder	Creates a `NXOpen.Features.OptimizeFaceBuilder` @return
CreateOvercrownFeatureBuilder	Creates a Overcrown feature builder @return OvercrownBuilder object
CreatePaintParametersBuilder	Creates a `NXOpen.Features.PaintParametersBuilder` @return
CreateParallelBuilder	Creates a `NXOpen.Features.ParallelBuilder` @return
CreatePartModuleBuilder	Creates a `NXOpen.Features.PartModuleBuilder` @return
CreatePartModuleRelationshipBuilder	Creates a `NXOpen.GeometricUtilities.PartModuleRelationshipBuilder` @return
CreatePasteFaceBuilder	Creates a paste face builder @return Features.
CreatePatchBuilder	Creates a `NXOpen.Features.PatchBuilder` @return PatchBuilder object
CreatePatchOpeningsBuilder	Creates a `NXOpen.Features.PatchOpeningsBuilder` @return
CreatePatternFaceBuilder	Creates a pattern face builder, don’t use it until nx502 @return Features.
CreatePatternFaceFeatureBuilder	Creates a `NXOpen.Features.PatternFaceFeatureBuilder` @return
CreatePatternFeatureBuilder	Creates `NXOpen.Features.PatternFeatureBuilder` @return PatternFeatureBuilder object
CreatePatternGeometryBuilder	Creates a `NXOpen.Features.PatternGeometryBuilder` @return The builder for the feature class
CreatePedestrianProtectionBuilder	Creates a `NXOpen.Features.VehicleDesign.PedestrianProtectionBuilder` @return
CreatePerpendicularBuilder	Creates a `NXOpen.Features.PerpendicularBuilder` @return Features.
CreatePointSetBuilder	Creates a `NXOpen.Features.PointSetBuilder` @return
CreatePoleSmoothingBuilder	Creates a `NXOpen.Features.PoleSmoothingBuilder` @return
CreateProjectCurveBuilder	Creates a `NXOpen.Features.ProjectCurveBuilder` @return ProjectCurveBuilder object
CreatePromotionBuilder	Creates a `NXOpen.Features.PromotionBuilder` @return
CreatePullFaceBuilder	Creates a `NXOpen.Features.PullFaceBuilder` @return
CreateRadialDimensionBuilder	Creates a `NXOpen.Features.RadialDimensionBuilder` @return
CreateRapidSurfaceBuilder	Creates a Rapid Surfacing feature builder @return RapidSurfaceBuilder object
CreateRasterImage	Creates a raster image @return RasterImage object
CreateReferenceMapperBuilder	Creates a `NXOpen.Features.ReferenceMapperBuilder` @return ReferenceMapperBuilder
CreateRefitFaceBuilder	Creates a RefitFaceBuilder @return
CreateReflectionDataBuilder	Creates a `NXOpen.Features.VehicleDesign.ReflectionDataBuilder` @return
CreateRemoveParametersBuilder	Creates a `NXOpen.Features.RemoveParametersBuilder` @return Features.
CreateRenameLinkedPartModulePartBuilder	Creates a `NXOpen.GeometricUtilities.RenameLinkedPartModulePartBuilder` @return
CreateReorderBlendsBuilder	Creates a `NXOpen.Features.ReorderBlendsBuilder` @return
CreateReplaceBlendBuilder	Creates a `NXOpen.Features.ReplaceBlendBuilder` @return `NXOpen.Features.ReplaceBlendBuilder` object
CreateReplaceFaceBuilder	Creates a replace face builder, don’t use it until nx502 @return Features.
CreateReplaceFeatureBuilder	Creates a `NXOpen.Features.ReplaceFeatureBuilder` @return
CreateResizeBlendBuilder	Creates a resize blend builder, don’t use it until nx502 @return Features.
CreateResizeChamferBuilder	Creates a `NXOpen.Features.ResizeChamferBuilder` @return
CreateResizeFaceBuilder	Creates a resize face builder, don’t use it until nx502 @return Features.
CreateResizePlaneBuilder	Creates a Resize Datum Plane feature builder @return ResizePlaneBuilder object
CreateRevolveBuilder	Creates a Revolve builder @return RevolveBuilder object
CreateRibbonBuilder	Creates a ribbon builder @return Features.
CreateRpoBuilder	Creates a Relative Positioning Object builder @return RPOBuilder object
CreateRuledBuilder	Creates a Ruled Surface builder @return
CreateScaleBuilder	Creates a `NXOpen.Features.ScaleBuilder` @return ScaleBuilder object
CreateSeatBeltAnchorageBuilder	Creates a `NXOpen.Features.VehicleDesign.SeatBeltAnchorageBuilder` @return
CreateSectionCurveBuilder	Creates a `NXOpen.Features.SectionCurveBuilder` @return
CreateSectionEditBuilder	Creates a `NXOpen.Features.SectionEditBuilder` @return
CreateSectionInertiaAnalysisBuilder	Creates a `NXOpen.Features.SectionInertiaAnalysisBuilder` @return
CreateSectionSurfaceBuilder	Create a section surface @return
CreateSectionSurfaceBuilderEx	Creates a `NXOpen.Features.SectionSurfaceBuilderEx` @return
CreateSewBuilder	Creates a Sew feature builder @return SewBuilder object
CreateShellBuilder	Creates an Shell builder @return ShellBuilder object
CreateShellFaceBuilder	Creates a `NXOpen.Features.ShellFaceBuilder` @return `NXOpen.Features.ShellFaceBuilder` object
CreateShowRelatedFacesBuilder	Creates a `NXOpen.Features.ShowRelatedFacesBuilder` @return
CreateSilhouetteFlangeBuilder	Creates a `NXOpen.Features.SilhouetteFlangeBuilder` @return
CreateSketchFitCurveBuilder	Creates a `NXOpen.Features.SketchFitCurveBuilder` @return SketchFitCurveBuilder object
CreateSketchSplineBuilder	Creates a Studio Spline builder for sketcher @return SketchSplineBuilder object
CreateSmoothSplineBuilder	Creates a `NXOpen.Features.SmoothSplineBuilder` @return
CreateSnipSurfaceBuilder	Creates a `NXOpen.Features.SnipSurfaceBuilder` @return
CreateSphereBuilder	Creates a `NXOpen.Features.SphereBuilder` @return
CreateSphericalCornerBuilder	Creates a `NXOpen.Features.SphericalCornerBuilder` @return
CreateSplitBodyBuilder	Creates a `NXOpen.Features.SplitBodyBuilder` @return
CreateSplitBodyBuilderUsingCollector	Creates a `NXOpen.Features.SplitBodyBuilder`.
CreateStudioSplineBuilder	Creates a Studio Spline builder @return StudioSplineBuilder object
CreateStudioSplineBuilderEx	Creates a Studio Spline builder @return StudioSplineBuilderEx object
CreateStudioSurfaceBuilder	Creates a Studio Surface Builder @return StudioSurfaceBuilder object
CreateStudioXformBuilder	Creates a Features.
CreateStudioXformBuilderEx	Creates a Features.
CreateStyledBlendBuilder	Creates a `NXOpen.Features.StyledBlendBuilder` @return
CreateStyledCornerBuilder	Creates a `NXOpen.Features.StyledCornerBuilder` @return
CreateStyledSweepBuilder	Creates a `NXOpen.Features.StyledSweepBuilder` @return Features.
CreateSubtractFeature	Creates a subtract feature.
CreateSweepAlongGuideBuilder	Creates a `NXOpen.Features.SweepAlongGuideBuilder` @return
CreateSweptBuilder	Creates a `NXOpen.Features.SweptBuilder` @return
CreateSymmetricBuilder	Creates a `NXOpen.Features.SymmetricBuilder` @return
CreateTangentBuilder	Creates a `NXOpen.Features.TangentBuilder` @return Features.
CreateTextBuilder	Creates a `NXOpen.Features.TextBuilder` @return
CreateThickenBuilder	Creates a Thicken feature builder @return ThickenBuilder object
CreateThroughCurveMeshBuilder	Creates a `NXOpen.Features.ThroughCurveMeshBuilder` @return ThroughCurveMeshBuilder object
CreateThroughCurvesBuilder	Creates a `NXOpen.Features.ThroughCurvesBuilder` @return ThroughCurvesBuilder object
CreateTrimBody2Builder	Creates a `NXOpen.Features.TrimBody2Builder` for Trim Body feature @return
CreateTrimBodyBuilder	Creates a trim body builder object.
CreateTrimCurveBuilder	Creates a `NXOpen.Features.TrimCurveBuilder` @return Trim Curve Builder object
CreateTrimExtendBuilder	Creates a `NXOpen.Features.TrimExtendBuilder` @return
CreateTrimsheetBuilder	Creates a `NXOpen.Features.TrimSheetBuilder` @return Trim Sheet Builder object
CreateTubeBuilder	Creates a `NXOpen.Features.TubeBuilder` @return TubeBuilder object
CreateUniteFeature	Creates a unite feature.
CreateUnnestModuleBuilder	Creates a `NXOpen.GeometricUtilities.UnnestModuleBuilder`
CreateUnsewBuilder	Creates a `NXOpen.Features.UnsewBuilder` @return
CreateUntrimBuilder	Creates a `NXOpen.Features.UntrimBuilder` @return Features.
CreateUserDefinedObjectFeatureBuilder	Creates a UserDefinedObjectFeature builder @return UserDefinedObjectFeatureBuilder object
CreateVariableOffsetBuilder	Creates a `NXOpen.Features.VariableOffsetBuilder` @return
CreateVarsweepBuilder	Creates a Varsweep feature builder @return VarsweepBuilder object
CreateVehicleCoordinateSystemBuilder	Creates a `NXOpen.Features.VehicleDesign.VehicleCoordinateSystemBuilder` @return
CreateVirtualBlendEdgeBuilder	Creates a `NXOpen.Features.VirtualBlendEdgeBuilder` @return
CreateVirtualCurveBuilder	Creates a `NXOpen.Features.VirtualCurveBuilder` @return
CreateVisionPlaneBuilder	Creates a `NXOpen.Features.VehicleDesign.VisionPlaneBuilder` @return
CreateWaveDatumBuilder	Creates a Wavedatum Builder @return
CreateWavePointBuilder	Creates a `NXOpen.Features.WavePointBuilder` @return
CreateWaveRoutingBuilder	Creates a `NXOpen.Features.WaveRoutingBuilder` @return
CreateWaveSketchBuilder	Creates a Wavesketch Builder @return
CreateWindshieldDatumBuilder	Creates a `NXOpen.Features.VehicleDesign.WindshieldDatumBuilder` @return
CreateWrapBuilder	Creates a `NXOpen.Features.WrapBuilder` @return WrapBuilder object
CreateWrapGeometryBuilder	Creates a `NXOpen.Features.WrapGeometryBuilder` @return
DeleteAllPartInformationalFeatureAlerts	Delete all informational alerts from all the features in a given part
DeleteInformationalAlerts	Delete all informational alerts from the features and if numFrecs is 0 then delete informational alerts from all fetaures in the part
DeleteWarningAlerts	Delete all warning alerts from the features and if numFrecs is 0 then delete warning alerts from all fetaures in the part
FindObject	Finds the `NXOpen.Features` with the given identifier as recorded in a journal.
GetAllPartFeaturesWithAlerts	Returns a list of all features from a given part that have update alerts @return
GetAssociatedFeature	Get the feature associated with an object @return Feature associated with object.
GetAssociatedFeaturesOfBody	Returns all features that are associated with this body @return The associated NXOpen.Features.Feature`s of the input :py:class:`NXOpen.Body
GetAssociatedFeaturesOfEdge	Returns all features that are associated with the faces of this edge @return The associated NXOpen.Features.Feature`s of the input :py:class:`NXOpen.Edge
GetAssociatedFeaturesOfFace	Returns all features associated with this face @return The associated NXOpen.Features.Feature`s of the input :py:class:`NXOpen.Face
GetFeatures	Returns all the features in the part @return Features in the part
GetIsMasterCutVisibleInView	Returns if a `NXOpen.Features.MasterCutBuilder` is visbible in specified `NXOpen.CutView` .
GetParentFeatureOfBody	Returns the feature that created this body.
GetParentFeatureOfFace	Returns the feature that created this face @return The parent `NXOpen.Features.Feature` of the input `NXOpen.Face`
GetParentFeaturesOfEdge	Returns the features that created the faces of this edge.
GetPartFeaturesWithNewAlerts	Returns a list of features that generated update alerts during recent update @return
ReorderFeature	Reorders the Feature with respect to the given feature
ReorganizeFeature	Reorganizes the Feature with respect to the given feature across the part module
ReplaceWithIndependentSketch	Replace the given features with Independent Sketch @return
SetCanResetMcf	Sets whether mcf is allowed
SetEditWithRollbackFeature	Sets the feature being edited with rollback
SuppressFeatures	Suppress the given features
UnsuppressFeatures	Unsuppress the given features @return Features which were not unsuppressed due to errors

Enumerations¶

FeatureCollectionReorderType Enumeration

Reorder operation type.

Property Detail¶

ActiveGroup¶

FeatureCollection.ActiveGroup¶

Returns the active feature group.

-------------------------------------

Getter Method

Signature ActiveGroup()

Returns:
Return type:	`NXOpen.Features.FeatureGroup`

New in version NX7.5.1.

License requirements: None.

Method Detail¶

ConvertToFloatingFeatureGroups¶

FeatureCollection.ConvertToFloatingFeatureGroups¶

Converts sequential feature groups to floating feature groups

Signature ConvertToFloatingFeatureGroups()

New in version NX7.5.3.

License requirements: solid_modeling (“SOLIDS MODELING”)

ConvertToNewFeatureGroups¶

FeatureCollection.ConvertToNewFeatureGroups¶

Converts to new feature groups

Signature ConvertToNewFeatureGroups()

New in version NX7.5.1.

Deprecated since version NX8.0.0: Use NXOpen.Features.FeatureCollection.ConvertToSequentialFeatureGroups or NXOpen.Features.FeatureCollection.ConvertToFloatingFeatureGroups instead.

License requirements: solid_modeling (“SOLIDS MODELING”)

ConvertToSequentialFeatureGroups¶

FeatureCollection.ConvertToSequentialFeatureGroups¶

Converts floating feature groups to sequential feature groups

Signature ConvertToSequentialFeatureGroups()

New in version NX7.5.3.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateAdaptiveShellBuilder¶

FeatureCollection.CreateAdaptiveShellBuilder¶

Creates a NXOpen.Features.AdaptiveShellBuilder

Signature CreateAdaptiveShellBuilder(shellFace)

Parameters:	shellFace (`NXOpen.Features.AdaptiveShell`) – `NXOpen.Features.AdaptiveShell` to be edited
Returns:	`NXOpen.Features.AdaptiveShellBuilder` object
Return type:	`NXOpen.Features.AdaptiveShellBuilder`

New in version NX6.0.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”)

CreateAdmMoveFaceBuilder¶

FeatureCollection.CreateAdmMoveFaceBuilder¶

Creates a NXOpen.Features.AdmMoveFaceBuilder

Signature CreateAdmMoveFaceBuilder(admMoveFace)

Parameters:	admMoveFace (`NXOpen.Features.AdmMoveFace`) – `NXOpen.Features.AdmMoveFace` to be edited
Returns:
Return type:	`NXOpen.Features.AdmMoveFaceBuilder`

New in version NX6.0.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”)

CreateAdmOffsetRegionBuilder¶

FeatureCollection.CreateAdmOffsetRegionBuilder¶

Creates a NXOpen.Features.AdmOffsetRegionBuilder

Signature CreateAdmOffsetRegionBuilder(offsetRegion)

Parameters:	offsetRegion (`NXOpen.Features.AdmOffsetRegion`) – `NXOpen.Features.AdmOffsetRegion` to be edited
Returns:	Features.

AdmOffsetRegionBuilder object :rtype: NXOpen.Features.AdmOffsetRegionBuilder

New in version NX6.0.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”)

CreateAdmResizeFaceBuilder¶

FeatureCollection.CreateAdmResizeFaceBuilder¶

Creates a NXOpen.Features.AdmResizeFaceBuilder

Signature CreateAdmResizeFaceBuilder(admResizeFace)

Parameters:	admResizeFace (`NXOpen.Features.AdmResizeFace`) – `NXOpen.Features.AdmResizeFace` to be edited
Returns:
Return type:	`NXOpen.Features.AdmResizeFaceBuilder`

New in version NX6.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”)

CreateAestheticFaceBlendBuilder¶

FeatureCollection.CreateAestheticFaceBlendBuilder¶

Creates a NXOpen.Features.AestheticFaceBlendBuilder

Signature CreateAestheticFaceBlendBuilder(aestheticFaceBlend)

Parameters:	aestheticFaceBlend (`NXOpen.Features.AestheticFaceBlend`) – `NXOpen.Features.AestheticFaceBlend` to be edited
Returns:
Return type:	`NXOpen.Features.AestheticFaceBlendBuilder`

New in version NX7.5.0.

License requirements: solid_modeling (“SOLIDS MODELING”) OR studio_free_form (“STUDIO FREE FORM”)

CreateAnalyzePocketBuilder¶

FeatureCollection.CreateAnalyzePocketBuilder¶

Creates a NXOpen.Features.AnalyzePocketBuilder

Signature CreateAnalyzePocketBuilder(analyzePocket)

Parameters:	analyzePocket (`NXOpen.Features.AnalyzePocket`) – `NXOpen.Features.AnalyzePocket` to be edited
Returns:	AnalyzePocketBuilder object
Return type:	`NXOpen.Features.AnalyzePocketBuilder`

New in version NX9.0.0.

License requirements: nx_aero_design (” NX Aero Design”)

CreateAngularDimensionBuilder¶

FeatureCollection.CreateAngularDimensionBuilder¶

Creates a NXOpen.Features.AngularDimBuilder

Signature CreateAngularDimensionBuilder(angularDimension)

Parameters:	angularDimension (`NXOpen.Features.AngularDim`) – `NXOpen.Features.AngularDim` to be edited
Returns:
Return type:	`NXOpen.Features.AngularDimBuilder`

New in version NX6.0.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”)

CreateAocsBuilder¶

FeatureCollection.CreateAocsBuilder¶

Creates an Offset In Face builder

Signature CreateAocsBuilder(aocs)

Parameters:	aocs (`NXOpen.Features.Feature`) – `NXOpen.Features.AOCSBuilder` to be edited
Returns:	AOCSBuilder object
Return type:	`NXOpen.Features.AOCSBuilder`

New in version NX4.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateAssemblyCutBuilder¶

FeatureCollection.CreateAssemblyCutBuilder¶

Creates a NXOpen.Features.AssemblyCutBuilder

Signature CreateAssemblyCutBuilder(assemblyCut)

Parameters:	assemblyCut (`NXOpen.Features.AssemblyCut`) – `NXOpen.Features.AssemblyCut` to be edited
Returns:	Features.

AssemblyCutBuilder object :rtype: NXOpen.Features.AssemblyCutBuilder

New in version NX6.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateBlendPocketBuilder¶

FeatureCollection.CreateBlendPocketBuilder¶

Creates a NXOpen.Features.BlendPocketBuilder

Signature CreateBlendPocketBuilder(blendPocket)

Parameters:	blendPocket (`NXOpen.Features.BlendPocket`) – `NXOpen.Features.BlendPocket` to be edited
Returns:	BlendPocketBuilder object
Return type:	`NXOpen.Features.BlendPocketBuilder`

New in version NX9.0.0.

License requirements: nx_aero_design (” NX Aero Design”)

CreateBlockFeatureBuilder¶

FeatureCollection.CreateBlockFeatureBuilder¶

Creates a Block feature builder

Signature CreateBlockFeatureBuilder(block)

Parameters:	block (`NXOpen.Features.Feature`) – `NXOpen.Features.Block` to be edited
Returns:	BlockFeatureBuilder object
Return type:	`NXOpen.Features.BlockFeatureBuilder`

New in version NX3.0.0.

License requirements: features_modeling (“FEATURES MODELING”) OR cam_base (“CAM BASE”), solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”)

CreateBooleanBuilder¶

FeatureCollection.CreateBooleanBuilder¶

Creates a Boolean builder

Signature CreateBooleanBuilder(booleanFeature)

Parameters:	booleanFeature (`NXOpen.Features.BooleanFeature`) – `NXOpen.Features.BooleanFeature` to be edited
Returns:	BooleanBuilder object
Return type:	`NXOpen.Features.BooleanBuilder`

New in version NX4.0.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”)

CreateBooleanBuilderUsingCollector¶

FeatureCollection.CreateBooleanBuilderUsingCollector¶

Creates a Boolean builder.

Leverage body collectors if possible

Signature CreateBooleanBuilderUsingCollector(booleanFeature)

Parameters:	booleanFeature (`NXOpen.Features.BooleanFeature`) – `NXOpen.Features.BooleanFeature` to be edited
Returns:	BooleanBuilder object
Return type:	`NXOpen.Features.BooleanBuilder`

New in version NX7.5.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”)

CreateBoundedPlaneBuilder¶

FeatureCollection.CreateBoundedPlaneBuilder¶

Creates a NXOpen.Features.BoundedPlaneBuilder

Signature CreateBoundedPlaneBuilder(boundedPlane)

Parameters:	boundedPlane (`NXOpen.Features.BoundedPlane`) – `NXOpen.Features.BoundedPlane` to be edited
Returns:	Features.

BoundedPlaneBuilder object :rtype: NXOpen.Features.BoundedPlaneBuilder

New in version NX6.0.0.

License requirements: nx_freeform_1 (“basic freeform modeling”)

CreateBridgeCurveBuilder¶

FeatureCollection.CreateBridgeCurveBuilder¶

Creates a NXOpen.Features.BridgeCurveBuilder

Signature CreateBridgeCurveBuilder(bridgeCurve)

Parameters:	bridgeCurve (`NXOpen.Features.Feature`) – `NXOpen.Features.BridgeCurve` to be edited
Returns:
Return type:	`NXOpen.Features.BridgeCurveBuilder`

New in version NX5.0.0.

Deprecated since version NX8.5.0: Use NXOpen.Features.FeatureCollection.CreateBridgeCurveBuilderEx instead.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”)

CreateBridgeCurveBuilderEx¶

FeatureCollection.CreateBridgeCurveBuilderEx¶

Creates a NXOpen.Features.BridgeCurveBuilderEx

Signature CreateBridgeCurveBuilderEx(bridgeCurve)

Parameters:	bridgeCurve (`NXOpen.Features.BridgeCurve`) – `NXOpen.Features.BridgeCurve` to be edited
Returns:
Return type:	`NXOpen.Features.BridgeCurveBuilderEx`

New in version NX8.5.0.

License requirements: solid_modeling (“SOLIDS MODELING”) OR nx_freeform_1 (“basic freeform modeling”)

CreateBridgeSurfaceBuilder¶

FeatureCollection.CreateBridgeSurfaceBuilder¶

Creates a NXOpen.Features.BridgeSurfaceBuilder

Signature CreateBridgeSurfaceBuilder(bridgeSurface)

Parameters:	bridgeSurface (`NXOpen.Features.BridgeSurface`) – `NXOpen.Features.BridgeSurface` to be edited
Returns:
Return type:	`NXOpen.Features.BridgeSurfaceBuilder`

New in version NX8.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateChamferBuilder¶

FeatureCollection.CreateChamferBuilder¶

Creates a Chamfer feature builder

Signature CreateChamferBuilder(chamfer)

Parameters:	chamfer (`NXOpen.Features.Feature`) – Chamfer to be edited, if None then create a new one
Returns:	ChamferBuilder object
Return type:	`NXOpen.Features.ChamferBuilder`

New in version NX4.0.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”)

CreateChangeShellThicknessBuilder¶

FeatureCollection.CreateChangeShellThicknessBuilder¶

Creates a NXOpen.Features.ChangeShellThicknessBuilder

Signature CreateChangeShellThicknessBuilder(shellFace)

Parameters:	shellFace (`NXOpen.Features.ChangeShellThickness`) – `NXOpen.Features.ChangeShellThickness` to be edited
Returns:	`NXOpen.Features.ChangeShellThicknessBuilder` object
Return type:	`NXOpen.Features.ChangeShellThicknessBuilder`

New in version NX6.0.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”)

CreateCircularBlendCurveBuilder¶

FeatureCollection.CreateCircularBlendCurveBuilder¶

Creates a NXOpen.Features.CircularBlendCurveBuilder

Signature CreateCircularBlendCurveBuilder(circularBlendCurve)

Parameters:	circularBlendCurve (`NXOpen.Features.CircularBlendCurve`) – `NXOpen.Features.CircularBlendCurve` to be edited, , if None then create a new one
Returns:	CircularBlendCurveBuilder object
Return type:	`NXOpen.Features.CircularBlendCurveBuilder`

New in version NX5.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateCoaxialBuilder¶

FeatureCollection.CreateCoaxialBuilder¶

Creates a NXOpen.Features.CoaxialBuilder

Signature CreateCoaxialBuilder(coaxial)

Parameters:	coaxial (`NXOpen.Features.Coaxial`) – `NXOpen.Features.Coaxial` to be edited
Returns:	Features.

CoaxialBuilder object :rtype: NXOpen.Features.CoaxialBuilder

New in version NX6.0.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”)

CreateColorFaceBuilder¶

FeatureCollection.CreateColorFaceBuilder¶

Creates a NXOpen.Features.ColorFaceBuilder

Signature CreateColorFaceBuilder()

Returns:
Return type:	`NXOpen.Features.ColorFaceBuilder`

New in version NX7.0.0.

License requirements: None.

CreateColorFeatureBuilder¶

FeatureCollection.CreateColorFeatureBuilder¶

Creates a NXOpen.Features.ColorFeatureBuilder

Signature CreateColorFeatureBuilder()

Returns:
Return type:	`NXOpen.Features.ColorFeatureBuilder`

New in version NX8.5.0.

License requirements: None.

CreateColorFeatureGroupBuilder¶

FeatureCollection.CreateColorFeatureGroupBuilder¶

Creates a NXOpen.Features.ColorFeatureGroupBuilder

Signature CreateColorFeatureGroupBuilder()

Returns:
Return type:	`NXOpen.Features.ColorFeatureGroupBuilder`

New in version NX8.5.0.

License requirements: None.

CreateCombinedProjectionBuilder¶

FeatureCollection.CreateCombinedProjectionBuilder¶

Creates a NXOpen.Features.CombinedProjectionBuilder

Signature CreateCombinedProjectionBuilder(combinedProjection)

Parameters:	combinedProjection (`NXOpen.Features.CombinedProjection`) – `NXOpen.Features.CombinedProjection` to be edited
Returns:
Return type:	`NXOpen.Features.CombinedProjectionBuilder`

New in version NX6.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateCompositeCurveBuilder¶

FeatureCollection.CreateCompositeCurveBuilder¶

Creates a NXOpen.Features.CompositeCurveBuilder

Signature CreateCompositeCurveBuilder(compositeCurve)

Parameters:	compositeCurve (`NXOpen.Features.Feature`) – `NXOpen.Features.Feature` to be edited
Returns:	Features.

CompositeCurveBuilder object :rtype: NXOpen.Features.CompositeCurveBuilder

New in version NX5.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”) OR geometric_tol (“GDT”)

CreateConcaveFacesBuilder¶

FeatureCollection.CreateConcaveFacesBuilder¶

Creates a NXOpen.Features.ConcaveFacesBuilder

Signature CreateConcaveFacesBuilder(concaveFaces)

Parameters:	concaveFaces (`NXOpen.Features.ConcaveFaces`) – `NXOpen.Features.ConcaveFaces` to be edited
Returns:
Return type:	`NXOpen.Features.ConcaveFacesBuilder`

New in version NX7.5.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateConeBuilder¶

FeatureCollection.CreateConeBuilder¶

Creates a NXOpen.Features.ConeBuilder

Signature CreateConeBuilder(cone)

Parameters:	cone (`NXOpen.Features.Cone`) – `NXOpen.Features.Cone` to be edited
Returns:
Return type:	`NXOpen.Features.ConeBuilder`

New in version NX6.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateConvertFeatureGroupsToModulesBuilder¶

FeatureCollection.CreateConvertFeatureGroupsToModulesBuilder¶

Creates a NXOpen.GeometricUtilities.ConvertFeatureGroupsToModulesBuilder

Signature CreateConvertFeatureGroupsToModulesBuilder()

Returns:
Return type:	`NXOpen.GeometricUtilities.ConvertFeatureGroupsToModulesBuilder`

New in version NX9.0.0.

License requirements: usr_defined_features (“USER DEFINED FEATURES”)

CreateCoplanarBuilder¶

FeatureCollection.CreateCoplanarBuilder¶

Creates a coplanar builder, don’t use it until nx6

Signature CreateCoplanarBuilder(coplanar)

Parameters:	coplanar (`NXOpen.Features.Feature`) – `NXOpen.Features.Feature` to be edited
Returns:	Features.CoplanarBuilder object
Return type:	`NXOpen.Features.CoplanarBuilder`

New in version NX6.0.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”)

CreateCopyFaceBuilder¶

FeatureCollection.CreateCopyFaceBuilder¶

Creates a copy face builder

Signature CreateCopyFaceBuilder(copyFace)

Parameters:	copyFace (`NXOpen.Features.Feature`) – `NXOpen.Features.Feature` to be edited
Returns:	Features.CopyFaceBuilder object
Return type:	`NXOpen.Features.CopyFaceBuilder`

New in version NX6.0.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”)

CreateCopyPasteBuilder¶

FeatureCollection.CreateCopyPasteBuilder¶

Creates a NXOpen.Features.CopyPasteBuilder

Signature CreateCopyPasteBuilder(features)

Parameters:	features (list of `NXOpen.NXObject`) – Features to be copy/paste
Returns:	CopyPasteBuilder
Return type:	`NXOpen.Features.CopyPasteBuilder`

New in version NX6.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateCopyPasteBuilder2¶

FeatureCollection.CreateCopyPasteBuilder2¶

Creates a NXOpen.Features.CopyPasteBuilder

Signature CreateCopyPasteBuilder2(features)

Parameters:	features (list of `NXOpen.NXObject`) – Features to be copy/paste
Returns:	CopyPasteBuilder
Return type:	`NXOpen.Features.CopyPasteBuilder`

New in version NX8.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateCurveOnSurfaceBuilder¶

FeatureCollection.CreateCurveOnSurfaceBuilder¶

Creates a Curve On Surface feature builder

Signature CreateCurveOnSurfaceBuilder(cosFeature)

Parameters:	cosFeature (`NXOpen.Features.CurveOnSurface`) – `NXOpen.Features.CurveOnSurface` to be edited
Returns:	CurveOnSurfaceBuilder object
Return type:	`NXOpen.Features.CurveOnSurfaceBuilder`

New in version NX5.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateCurvelengthBuilder¶

FeatureCollection.CreateCurvelengthBuilder¶

Creates a Curvelength builder

Signature CreateCurvelengthBuilder(curvelength)

Parameters:	curvelength (`NXOpen.Features.Feature`) – `NXOpen.Features.CurveLengthBuilder` to be edited, if None then create a new one
Returns:	CurveLengthBuilder object
Return type:	`NXOpen.Features.CurveLengthBuilder`

New in version NX4.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateCutFaceBuilder¶

FeatureCollection.CreateCutFaceBuilder¶

Creates a cut face builder

Signature CreateCutFaceBuilder(cutFace)

Parameters:	cutFace (`NXOpen.Features.Feature`) – `NXOpen.Features.Feature` to be edited
Returns:	Features.CutFaceBuilder object
Return type:	`NXOpen.Features.CutFaceBuilder`

New in version NX6.0.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”)

CreateCylinderBuilder¶

FeatureCollection.CreateCylinderBuilder¶

Creates a NXOpen.Features.CylinderBuilder

Signature CreateCylinderBuilder(cylinder)

Parameters:	cylinder (`NXOpen.Features.Feature`) – `NXOpen.Features.Cylinder` to be edited
Returns:
Return type:	`NXOpen.Features.CylinderBuilder`

New in version NX5.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”)

CreateDatumAxisBuilder¶

FeatureCollection.CreateDatumAxisBuilder¶

Creates a Datum Axis feature builder

Signature CreateDatumAxisBuilder(datumAxis)

Parameters:	datumAxis (`NXOpen.Features.Feature`) – `NXOpen.Features.DatumAxisFeature` to be edited
Returns:	DatumAxisBuilder object
Return type:	`NXOpen.Features.DatumAxisBuilder`

New in version NX3.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”) OR geometric_tol (“GDT”)

CreateDatumCsysBuilder¶

FeatureCollection.CreateDatumCsysBuilder¶

Creates a Datum CSYS feature builder

Signature CreateDatumCsysBuilder(datumCsys)

Parameters:	datumCsys (`NXOpen.Features.Feature`) – `NXOpen.Features.DatumCsysBuilder` to be edited
Returns:	DatumCsysBuilder object
Return type:	`NXOpen.Features.DatumCsysBuilder`

New in version NX4.0.0.

License requirements: features_modeling (“FEATURES MODELING”) OR cam_base (“CAM BASE”) OR geometric_tol (“GDT”), solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”) OR geometric_tol (“GDT”)

CreateDatumPlaneBuilder¶

FeatureCollection.CreateDatumPlaneBuilder¶

Creates a Datum Plane feature builder

Signature CreateDatumPlaneBuilder(dplane)

Parameters:	dplane (`NXOpen.Features.Feature`) – `NXOpen.Features.DatumPlaneFeature` to be edited
Returns:	DatumPlaneBuilder object
Return type:	`NXOpen.Features.DatumPlaneBuilder`

New in version NX3.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”) OR geometric_tol (“GDT”)

CreateDeleteBodyBuilder¶

FeatureCollection.CreateDeleteBodyBuilder¶

Creates a NXOpen.Features.DeleteBodyBuilder

Signature CreateDeleteBodyBuilder(deleteBody)

Parameters:	deleteBody (`NXOpen.Features.DeleteBody`) – `NXOpen.Features.DeleteBody` to be edited
Returns:	DeleteBodyBuilder object
Return type:	`NXOpen.Features.DeleteBodyBuilder`

New in version NX8.5.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”)

CreateDeleteEdgeBuilder¶

FeatureCollection.CreateDeleteEdgeBuilder¶

Creates a NXOpen.Features.DeleteEdgeBuilder

Signature CreateDeleteEdgeBuilder(deleteEdge)

Parameters:	deleteEdge (`NXOpen.Features.DeleteEdge`) – `NXOpen.Features.DeleteEdge` to be edited
Returns:
Return type:	`NXOpen.Features.DeleteEdgeBuilder`

New in version NX8.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateDeleteFaceBuilder¶

FeatureCollection.CreateDeleteFaceBuilder¶

Creates a delete face builder, don’t use it until nx502

Signature CreateDeleteFaceBuilder(deleteFace)

Parameters:	deleteFace (`NXOpen.Features.Feature`) – `NXOpen.Features.Feature` to be edited
Returns:	Features.DeleteFaceBuilder object
Return type:	`NXOpen.Features.DeleteFaceBuilder`

New in version NX5.0.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”)

CreateDividefaceBuilder¶

FeatureCollection.CreateDividefaceBuilder¶

Creates a Divideface builder

Signature CreateDividefaceBuilder(divideface)

Parameters:	divideface (`NXOpen.Features.Feature`) – `NXOpen.Features.DividefaceBuilder` to be edited
Returns:	DividefaceBuilder object
Return type:	`NXOpen.Features.DividefaceBuilder`

New in version NX4.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”)

CreateDraftBodyBuilder¶

FeatureCollection.CreateDraftBodyBuilder¶

Creates a NXOpen.Features.DraftBodyBuilder

Signature CreateDraftBodyBuilder(draftBody)

Parameters:	draftBody (`NXOpen.Features.Feature`) – `NXOpen.Features.DraftBody` to be edited
Returns:
Return type:	`NXOpen.Features.DraftBodyBuilder`

New in version NX5.0.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”)

CreateDraftBuilder¶

FeatureCollection.CreateDraftBuilder¶

Creates a draft builder

Signature CreateDraftBuilder(draft)

Parameters:	draft (`NXOpen.Features.Feature`) – `NXOpen.Features.DraftBuilder` to be edited, if None then create a new one
Returns:	DraftBuilder object
Return type:	`NXOpen.Features.DraftBuilder`

New in version NX4.0.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”)

CreateDraftingSplineBuilder¶

FeatureCollection.CreateDraftingSplineBuilder¶

Creates a Studio Spline builder for drafting

Signature CreateDraftingSplineBuilder(spline)

Parameters:	spline (`NXOpen.Spline`) – `NXOpen.Spline` to be edited
Returns:	DraftingSplineBuilder object
Return type:	`NXOpen.Features.DraftingSplineBuilder`

New in version NX8.0.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”)

CreateEdgeBlendBuilder¶

FeatureCollection.CreateEdgeBlendBuilder¶

Creates a Edge Blend feature builder

Signature CreateEdgeBlendBuilder(edgeblend)

Parameters:	edgeblend (`NXOpen.Features.Feature`) – `NXOpen.Features.EdgeBlendBuilder` to be edited, if None then create a new one
Returns:	EdgeBlendBuilder object
Return type:	`NXOpen.Features.EdgeBlendBuilder`

New in version NX4.0.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”)

CreateEdgeSymmetryBuilder¶

FeatureCollection.CreateEdgeSymmetryBuilder¶

Creates a NXOpen.Features.EdgeSymmetryBuilder

Signature CreateEdgeSymmetryBuilder(edgeSymmetry)

Parameters:	edgeSymmetry – `NXOpen.Features.EdgeSymmetry` to be edited.

Accepts NXOpen.Features.MatchEdge type if NXOpen.Features.MatchEdgeBuilderTypes is NXOpen.Features.MatchEdgeBuilderTypes.MatchEdgeToDatum. In that case converts NXOpen.Features.MatchEdge to NXOpen.Features.EdgeSymmetry feature. :type edgeSymmetry: NXOpen.Features.Feature :returns: :rtype: NXOpen.Features.EdgeSymmetryBuilder

New in version NX7.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”) OR studio_free_form (“STUDIO FREE FORM”)

CreateEditCrossSectionBuilder¶

FeatureCollection.CreateEditCrossSectionBuilder¶

Creates a NXOpen.Features.EditCrossSectionBuilder

Signature CreateEditCrossSectionBuilder(editCrossSection)

Parameters:	editCrossSection (`NXOpen.Features.EditCrossSection`) – `NXOpen.Features.EditCrossSection` to be edited
Returns:
Return type:	`NXOpen.Features.EditCrossSectionBuilder`

New in version NX8.0.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”)

CreateEditDimensionBuilder¶

FeatureCollection.CreateEditDimensionBuilder¶

Creates a NXOpen.Features.EditDimensionBuilder

Signature CreateEditDimensionBuilder()

Returns:
Return type:	`NXOpen.Features.EditDimensionBuilder`

New in version NX6.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”) OR drafting (“DRAFTING”)

CreateEmbossBodyBuilder¶

FeatureCollection.CreateEmbossBodyBuilder¶

Creates a NXOpen.Features.EmbossBodyBuilder

Signature CreateEmbossBodyBuilder(embossBody)

Parameters:	embossBody (`NXOpen.Features.EmbossBody`) – `NXOpen.Features.EmbossBody` to be edited
Returns:
Return type:	`NXOpen.Features.EmbossBodyBuilder`

New in version NX8.5.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateEmbossBuilder¶

FeatureCollection.CreateEmbossBuilder¶

Creates an Emboss builder

Signature CreateEmbossBuilder(emboss)

Parameters:	emboss (`NXOpen.Features.Feature`) – `NXOpen.Features.EmbossBuilder` to be edited
Returns:	EmbossBuilder object
Return type:	`NXOpen.Features.EmbossBuilder`

New in version NX4.0.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”)

CreateEnlargeBuilder¶

FeatureCollection.CreateEnlargeBuilder¶

Creates an Enlarge builder

Signature CreateEnlargeBuilder(enlargeFeature)

Parameters:	enlargeFeature (`NXOpen.Features.Enlarge`) – `NXOpen.Features.Enlarge` to be edited
Returns:	EnlargeBuilder object
Return type:	`NXOpen.Features.EnlargeBuilder`

New in version NX6.0.0.

License requirements: nx_freeform_2 (“advanced freeform modeling”)

CreateExtensionBuilder¶

FeatureCollection.CreateExtensionBuilder¶

Creates a NXOpen.Features.ExtensionBuilder

Signature CreateExtensionBuilder(extension)

Parameters:	extension (`NXOpen.Features.Extension`) – `NXOpen.Features.Extension` to be edited
Returns:
Return type:	`NXOpen.Features.ExtensionBuilder`

New in version NX8.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”) OR free_form_modeling (“FREE-FORM MODELING”)

CreateExtractFaceBuilder¶

FeatureCollection.CreateExtractFaceBuilder¶

Creates a NXOpen.Features.ExtractFaceBuilder

Signature CreateExtractFaceBuilder(copyFace)

Parameters:	copyFace (`NXOpen.Features.Feature`) – CopyFace Feature to be edited
Returns:	Extract face builder object
Return type:	`NXOpen.Features.ExtractFaceBuilder`

New in version NX5.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”) OR geometric_tol (“GDT”)

CreateExtrudeBuilder¶

FeatureCollection.CreateExtrudeBuilder¶

Creates a Extrude builder

Signature CreateExtrudeBuilder(extrude)

Parameters:	extrude (`NXOpen.Features.Feature`) – `NXOpen.Features.Extrude` to be edited
Returns:	ExtrudeBuilder object
Return type:	`NXOpen.Features.ExtrudeBuilder`

New in version NX4.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateFaceBlendBuilder¶

FeatureCollection.CreateFaceBlendBuilder¶

Creates a Face Blend feature builder

Signature CreateFaceBlendBuilder(faceBlend)

Parameters:	faceBlend (`NXOpen.Features.Feature`) – `NXOpen.Features.FaceBlendBuilder` to be edited
Returns:	FaceBlendBuilder object
Return type:	`NXOpen.Features.FaceBlendBuilder`

New in version NX4.0.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”)

CreateFeatureReplayBuilder¶

FeatureCollection.CreateFeatureReplayBuilder¶

Creates a NXOpen.Features.FeatureReplayBuilder

Signature CreateFeatureReplayBuilder()

Returns:	Features.

FeatureReplayBuilder object :rtype: NXOpen.Features.FeatureReplayBuilder

New in version NX6.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateFitCurveBuilder¶

FeatureCollection.CreateFitCurveBuilder¶

Creates a NXOpen.Features.FitCurveBuilder

Signature CreateFitCurveBuilder(fitCurve)

Parameters:	fitCurve (`NXOpen.Features.FitCurve`) – `NXOpen.Features.FitCurve` to be edited
Returns:
Return type:	`NXOpen.Features.FitCurveBuilder`

New in version NX8.5.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateFitSurfaceBuilder¶

FeatureCollection.CreateFitSurfaceBuilder¶

Creates a NXOpen.Features.FitSurfaceBuilder

Signature CreateFitSurfaceBuilder(fitSurface)

Parameters:	fitSurface (`NXOpen.Features.FitSurface`) – `NXOpen.Features.FitSurface` to be edited
Returns:
Return type:	`NXOpen.Features.FitSurfaceBuilder`

New in version NX8.5.0.

License requirements: solid_modeling (“SOLIDS MODELING”) OR studio_free_form (“STUDIO FREE FORM”)

CreateFixedBuilder¶

FeatureCollection.CreateFixedBuilder¶

Creates a NXOpen.Features.FixedBuilder

Signature CreateFixedBuilder(makeFix)

Parameters:	makeFix (`NXOpen.Features.Fixed`) – `NXOpen.Features.Fixed` to be edited
Returns:
Return type:	`NXOpen.Features.FixedBuilder`

New in version NX7.0.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”)

CreateFlowBlendBuilder¶

FeatureCollection.CreateFlowBlendBuilder¶

Creates a Features.FlowBlendBuilder

Signature CreateFlowBlendBuilder(flowBlend)

Parameters:	flowBlend (`NXOpen.Features.FlowBlend`) – `Features.FlowBlend` to be edited
Returns:
Return type:	`NXOpen.Features.FlowBlendBuilder`

New in version NX10.0.0.

License requirements: flow_blend_for_nx (” Flow Blend”), solid_modeling (“SOLIDS MODELING”)

CreateFreeTransformerBuilder¶

FeatureCollection.CreateFreeTransformerBuilder¶

Creates a NXOpen.Features.FreeTransformerBuilder

Signature CreateFreeTransformerBuilder(freeTransformer)

Parameters:	freeTransformer (`NXOpen.Features.Feature`) – `NXOpen.Features.FreeTransformer` to be edited
Returns:
Return type:	`NXOpen.Features.FreeTransformerBuilder`

New in version NX10.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateGeneralConicBuilder¶

FeatureCollection.CreateGeneralConicBuilder¶

Creates a NXOpen.Features.GeneralConicBuilder

Signature CreateGeneralConicBuilder(generalConic)

Parameters:	generalConic (`NXOpen.Features.GeneralConic`) – `NXOpen.Features.GeneralConic` to be edited
Returns:
Return type:	`NXOpen.Features.GeneralConicBuilder`

New in version NX8.5.0.

License requirements: solid_modeling (“SOLIDS MODELING”) OR drafting (“DRAFTING”)

CreateGeomcopyBuilder¶

FeatureCollection.CreateGeomcopyBuilder¶

Creates a NXOpen.Features.GeomcopyBuilder

Signature CreateGeomcopyBuilder(geomcopy)

Parameters:	geomcopy (`NXOpen.Features.Feature`) – `NXOpen.Features.Geomcopy` to be edited
Returns:
Return type:	`NXOpen.Features.GeomcopyBuilder`

New in version NX5.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateGlobalShapingBuilder¶

FeatureCollection.CreateGlobalShapingBuilder¶

Creates a NXOpen.Features.GlobalShapingBuilder

Signature CreateGlobalShapingBuilder(globalShaping)

Parameters:	globalShaping (`NXOpen.Features.GlobalShaping`) – `NXOpen.Features.GlobalShaping` to be edited
Returns:
Return type:	`NXOpen.Features.GlobalShapingBuilder`

New in version NX5.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateGroupFaceBuilder¶

FeatureCollection.CreateGroupFaceBuilder¶

Creates a NXOpen.Features.GroupFaceBuilder

Signature CreateGroupFaceBuilder(groupFace)

Parameters:	groupFace (`NXOpen.Features.GroupFace`) – `NXOpen.Features.GroupFace` to be edited
Returns:
Return type:	`NXOpen.Features.GroupFaceBuilder`

New in version NX6.0.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”)

CreateGuidedExtensionBuilderEx¶

FeatureCollection.CreateGuidedExtensionBuilderEx¶

Creates a NXOpen.Features.GuidedExtensionBuilderEx

Signature CreateGuidedExtensionBuilderEx(guidedExtension)

Parameters:	guidedExtension (`NXOpen.Features.Feature`) – `NXOpen.Features.GuidedExtensionEx` to be edited
Returns:
Return type:	`NXOpen.Features.GuidedExtensionBuilderEx`

New in version NX10.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateHelixBuilder¶

FeatureCollection.CreateHelixBuilder¶

Creates a NXOpen.Features.HelixBuilder

Signature CreateHelixBuilder(helix)

Parameters:	helix (`NXOpen.Features.Helix`) – `NXOpen.Features.Helix` to be edited
Returns:
Return type:	`NXOpen.Features.HelixBuilder`

New in version NX8.5.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateHoleFeatureBuilder¶

FeatureCollection.CreateHoleFeatureBuilder¶

Creates a Hole feature builder

Signature CreateHoleFeatureBuilder(hole)

Parameters:	hole (`NXOpen.Features.Feature`) – `NXOpen.Features.Hole` to be edited
Returns:	HoleFeatureBuilder object
Return type:	`NXOpen.Features.HoleFeatureBuilder`

New in version NX3.0.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”)

CreateHolePackageBuilder¶

FeatureCollection.CreateHolePackageBuilder¶

Creates a NXOpen.Features.HolePackageBuilder

Signature CreateHolePackageBuilder(holePackage)

Parameters:	holePackage (`NXOpen.Features.HolePackage`) – `NXOpen.Features.HolePackage` to be edited
Returns:
Return type:	`NXOpen.Features.HolePackageBuilder`

New in version NX5.0.2.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateHoodVisibilityBuilder¶

FeatureCollection.CreateHoodVisibilityBuilder¶

Creates a NXOpen.Features.VehicleDesign.HoodVisibilityBuilder

Signature CreateHoodVisibilityBuilder(hoodVisibility)

Parameters:	hoodVisibility (`NXOpen.Features.Feature`) – feature to be edited
Returns:
Return type:	`NXOpen.Features.FeatureBuilder`

New in version NX6.0.0.

Deprecated since version NX9.0.0: Use NXOpen.Features.VehicleDesignCollection.CreateHoodVisibilityBuilder instead.

License requirements: nx_general_packaging (“NX General Packaging”)

CreateHumanBuilder¶

FeatureCollection.CreateHumanBuilder¶

Creates a human feature builder.

Signature CreateHumanBuilder(human)

Parameters:	human (`NXOpen.Features.Feature`) – `NXOpen.Features.Human` to be edited, if None then create a new one
Returns:	HumanBuilder object
Return type:	`NXOpen.Features.HumanBuilder`

New in version NX4.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”), ug_human (“Human Modelling”)

CreateHumanPosturePredictionBuilder¶

FeatureCollection.CreateHumanPosturePredictionBuilder¶

Creates a human posture prediction builder.

Signature CreateHumanPosturePredictionBuilder(posturePrediction)

Parameters:	posturePrediction (`NXOpen.HumanPosturePrediction`) – `NXOpen.HumanPosturePrediction` to be edited, if None then create a new one
Returns:	`NXOpen.HumanPosturePredictionBuilder` object
Return type:	`NXOpen.HumanPosturePredictionBuilder`

New in version NX5.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”), ug_human (“Human Modelling”)

CreateIformBuilder¶

FeatureCollection.CreateIformBuilder¶

Creates a NXOpen.Features.IFormBuilder

Signature CreateIformBuilder(iform)

Parameters:	iform (`NXOpen.Features.IForm`) – `NXOpen.Features.IForm` to be edited
Returns:
Return type:	`NXOpen.Features.IFormBuilder`

New in version NX7.5.0.

License requirements: studio_free_form (“STUDIO FREE FORM”)

CreateInstanceFeatureBuilder¶

FeatureCollection.CreateInstanceFeatureBuilder¶

Overloaded method CreateInstanceFeatureBuilder

CreateInstanceFeatureBuilder(instanceFeature)
CreateInstanceFeatureBuilder(instanceFeatures, forClocking)

-------------------------------------

Creates NXOpen.Features.InstanceFeatureBuilder

Signature CreateInstanceFeatureBuilder(instanceFeature)

Parameters:	instanceFeature (`NXOpen.Features.InstanceFeature`) – `NXOpen.Features.InstanceFeature` to be edited
Returns:	`NXOpen.Features.InstanceFeatureBuilder` object
Return type:	`NXOpen.Features.InstanceFeatureBuilder`

New in version NX8.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

-------------------------------------

Creates NXOpen.Features.InstanceFeatureBuilder from multiple NXOpen.Features.InstanceFeature

Signature CreateInstanceFeatureBuilder(instanceFeatures, forClocking)

Parameters:	instanceFeatures (list of `NXOpen.Features.InstanceFeature`) – array of `NXOpen.Features.InstanceFeature` to be edited forClocking (bool) –
Returns:	`NXOpen.Features.InstanceFeatureBuilder` object
Return type:	`NXOpen.Features.InstanceFeatureBuilder`

New in version NX8.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

-------------------------------------

CreateIntersectFeature¶

FeatureCollection.CreateIntersectFeature¶

Creates an intersect feature.

Signature CreateIntersectFeature(targetBody, retainTargetBody, toolBodies, retainToolBodies, allowNonAssociativeBoolean)

Parameters:	targetBody (`NXOpen.Body`) – Target body retainTargetBody (bool) – Retain option for target body toolBodies (list of `NXOpen.Body`) – Tool bodies retainToolBodies (bool) – Retain option for tool bodies allowNonAssociativeBoolean (bool) – Allow boolean operation even if it results into non-associative boolean
Returns:	a tuple
Return type:	A tuple consisting of (features, nonAssociativeBoolean, unparameterizedSolids). features is a list of `NXOpen.Features.BooleanFeature`. Array of boolean features nonAssociativeBoolean is a bool. True if operation resulted in a non-associative boolean. False otherwise unparameterizedSolids is a bool. True if operation resulted in unparameterized solids. False otherwise

New in version NX3.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateIntersectionCurveBuilder¶

FeatureCollection.CreateIntersectionCurveBuilder¶

Creates a NXOpen.Features.IntersectionCurveBuilder

Signature CreateIntersectionCurveBuilder(intersectionCurve)

Parameters:	intersectionCurve (`NXOpen.Features.Feature`) – `NXOpen.Features.IntersectionCurveBuilder` to be edited
Returns:	IntersectionCurveBuilder object
Return type:	`NXOpen.Features.IntersectionCurveBuilder`

New in version NX5.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateIsolateFeatureBuilder¶

FeatureCollection.CreateIsolateFeatureBuilder¶

Creates a NXOpen.Features.IsolateFeatureBuilder

Signature CreateIsolateFeatureBuilder(isolateFeature)

Parameters:	isolateFeature (`NXOpen.Features.IsolateFeature`) –
Returns:
Return type:	`NXOpen.Features.IsolateFeatureBuilder`

New in version NX8.5.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateIsoparametricCurvesBuilder¶

FeatureCollection.CreateIsoparametricCurvesBuilder¶

Creates a NXOpen.Features.IsoparametricCurvesBuilder

Signature CreateIsoparametricCurvesBuilder(isoparametricCurves)

Parameters:	isoparametricCurves (`NXOpen.Features.IsoparametricCurves`) – `NXOpen.Features.IsoparametricCurves` to be edited
Returns:
Return type:	`NXOpen.Features.IsoparametricCurvesBuilder`

New in version NX8.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateJoinCurvesBuilder¶

FeatureCollection.CreateJoinCurvesBuilder¶

Creates a NXOpen.Features.JoinCurvesBuilder

Signature CreateJoinCurvesBuilder(joinCurves)

Parameters:	joinCurves (`NXOpen.Features.Feature`) – `NXOpen.Features.JoinCurves` to be edited, if None then create a new one
Returns:	JoinCurvesBuilder object
Return type:	`NXOpen.Features.JoinCurvesBuilder`

New in version NX5.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”)

CreateLabelChamferBuilder¶

FeatureCollection.CreateLabelChamferBuilder¶

Creates a NXOpen.Features.LabelChamferBuilder

Signature CreateLabelChamferBuilder(labelChamfer)

Parameters:	labelChamfer (`NXOpen.Features.LabelChamfer`) – `NXOpen.Features.LabelChamfer` to be edited
Returns:
Return type:	`NXOpen.Features.LabelChamferBuilder`

New in version NX7.0.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”)

CreateLabelNotchBlendBuilder¶

FeatureCollection.CreateLabelNotchBlendBuilder¶

Creates a NXOpen.Features.LabelNotchBlendBuilder

Signature CreateLabelNotchBlendBuilder(labelNotchBlend)

Parameters:	labelNotchBlend (`NXOpen.Features.LabelNotchBlend`) – `NXOpen.Features.LabelNotchBlend` to be edited
Returns:
Return type:	`NXOpen.Features.LabelNotchBlendBuilder`

New in version NX8.0.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”)

CreateLawCurveBuilder¶

FeatureCollection.CreateLawCurveBuilder¶

Creates a NXOpen.Features.LawCurveBuilder

Signature CreateLawCurveBuilder(lawCurve)

Parameters:	lawCurve (`NXOpen.Features.LawCurve`) – `NXOpen.Features.LawCurve` to be edited
Returns:
Return type:	`NXOpen.Features.LawCurveBuilder`

New in version NX7.5.1.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateLawExtensionBuilder¶

FeatureCollection.CreateLawExtensionBuilder¶

Creates a NXOpen.Features.LawExtensionBuilder

Signature CreateLawExtensionBuilder(lawExtension)

Parameters:	lawExtension (`NXOpen.Features.LawExtension`) – `NXOpen.Features.LawExtension` to be edited
Returns:
Return type:	`NXOpen.Features.LawExtensionBuilder`

New in version NX6.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateLawExtensionBuilderEx¶

FeatureCollection.CreateLawExtensionBuilderEx¶

Creates a NXOpen.Features.LawExtensionBuilderEx

Signature CreateLawExtensionBuilderEx(lawExtension)

Parameters:	lawExtension (`NXOpen.Features.Feature`) – `NXOpen.Features.LawExtensionEx` to be edited
Returns:
Return type:	`NXOpen.Features.LawExtensionBuilderEx`

New in version NX8.5.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateLinearDimensionBuilder¶

FeatureCollection.CreateLinearDimensionBuilder¶

Creates a NXOpen.Features.LinearDimensionBuilder

Signature CreateLinearDimensionBuilder(linearDimension)

Parameters:	linearDimension (`NXOpen.Features.LinearDimension`) – `NXOpen.Features.LinearDimension` to be edited
Returns:
Return type:	`NXOpen.Features.LinearDimensionBuilder`

New in version NX6.0.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”)

CreateLinkedFacetBuilder¶

FeatureCollection.CreateLinkedFacetBuilder¶

Creates a NXOpen.Features.LinkedFacetBuilder

Signature CreateLinkedFacetBuilder(linkedFacet)

Parameters:	linkedFacet (`NXOpen.Features.LinkedFacet`) – `NXOpen.Features.LinkedFacet` to be edited
Returns:
Return type:	`NXOpen.Features.LinkedFacetBuilder`

New in version NX6.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateMakeOffsetBuilder¶

FeatureCollection.CreateMakeOffsetBuilder¶

Creates a NXOpen.Features.MakeOffsetBuilder

Signature CreateMakeOffsetBuilder(makeOffset)

Parameters:	makeOffset (`NXOpen.Features.MakeOffset`) – `NXOpen.Features.MakeOffset` to be edited
Returns:
Return type:	`NXOpen.Features.MakeOffsetBuilder`

New in version NX7.0.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”)

CreateMapleBuilder¶

FeatureCollection.CreateMapleBuilder¶

Creates a NXOpen.Features.MapleBuilder

Signature CreateMapleBuilder(maple)

Parameters:	maple (`NXOpen.Features.Maple`) – `NXOpen.Features.Maple` to be edited
Returns:
Return type:	`NXOpen.Features.MapleBuilder`

New in version NX7.5.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateMasterCutBuilder¶

FeatureCollection.CreateMasterCutBuilder¶

Create a Master Cut builder

Signature CreateMasterCutBuilder(masterCut)

Parameters:	masterCut (`NXOpen.Features.Feature`) – `NXOpen.Features.MasterCutBuilder` to be edited, if None then create a new one
Returns:
Return type:	`NXOpen.Features.MasterCutBuilder`

New in version NX4.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateMatchEdgeBuilder¶

FeatureCollection.CreateMatchEdgeBuilder¶

Creates a NXOpen.Features.MatchEdgeBuilder

Signature CreateMatchEdgeBuilder(matchEdge)

Parameters:	matchEdge (`NXOpen.Features.MatchEdge`) – `NXOpen.Features.MatchEdge` to be edited
Returns:
Return type:	`NXOpen.Features.MatchEdgeBuilder`

New in version NX6.0.0.

License requirements: features_modeling (“FEATURES MODELING”)

CreateMeshSurfaceBuilder¶

FeatureCollection.CreateMeshSurfaceBuilder¶

Creates a Mesh Surface feature builder

Signature CreateMeshSurfaceBuilder(meshSurf)

Parameters:	meshSurf (`NXOpen.Features.Feature`) – `NXOpen.Features.Ruled`, `NXOpen.Features.ThroughCurves`, `NXOpen.Features.ThroughCurveMesh` to be edited
Returns:	MeshSurfaceBuilder object
Return type:	`NXOpen.Features.MeshSurfaceBuilder`

New in version NX4.0.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”)

CreateMeshTransformerBuilder¶

FeatureCollection.CreateMeshTransformerBuilder¶

Creates a NXOpen.Features.MeshTransformerBuilder

Signature CreateMeshTransformerBuilder(meshTransformer)

Parameters:	meshTransformer (`NXOpen.Features.Feature`) – `NXOpen.Features.MeshTransformer` to be edited
Returns:
Return type:	`NXOpen.Features.MeshTransformerBuilder`

New in version NX10.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateMidSurfaceByFacePairsBuilder¶

FeatureCollection.CreateMidSurfaceByFacePairsBuilder¶

Creates a NXOpen.Features.MidSurfaceByFacePairsBuilder

Signature CreateMidSurfaceByFacePairsBuilder(midSurfaceByFacePairs)

Parameters:	midSurfaceByFacePairs (`NXOpen.Features.Feature`) – `NXOpen.Features.MidSurfaceByFacePairs` to be edited or a `NXOpen.Features.MidSurfaceFacePair`
Returns:
Return type:	`NXOpen.Features.MidSurfaceByFacePairsBuilder`

New in version NX7.5.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateMidSurfaceUserDefinedBuilder¶

FeatureCollection.CreateMidSurfaceUserDefinedBuilder¶

Creates a NXOpen.Features.MidSurfaceUserDefinedBuilder

Signature CreateMidSurfaceUserDefinedBuilder(midsurfaceUserDefined)

Parameters:	midsurfaceUserDefined (`NXOpen.Features.MidSurfaceUserDefined`) – `NXOpen.Features.MidSurfaceUserDefined` to be edited
Returns:
Return type:	`NXOpen.Features.MidSurfaceUserDefinedBuilder`

New in version NX7.5.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateMirrorBodyBuilder¶

FeatureCollection.CreateMirrorBodyBuilder¶

Creates a NXOpen.Features.MirrorBodyBuilder

Signature CreateMirrorBodyBuilder(mirrorBody)

Parameters:	mirrorBody (`NXOpen.Features.Feature`) – `NXOpen.Features.MirrorBodyBuilder` to be edited
Returns:	MirrorBodyBuilder object
Return type:	`NXOpen.Features.MirrorBodyBuilder`

New in version NX5.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”)

CreateMirrorBuilder¶

FeatureCollection.CreateMirrorBuilder¶

Creates NXOpen.Features.MirrorBuilder

Signature CreateMirrorBuilder(mirrorFeature)

Parameters:	mirrorFeature (`NXOpen.Features.Mirror`) – `NXOpen.Features.Mirror` to be edited
Returns:	`NXOpen.Features.MirrorBuilder` object
Return type:	`NXOpen.Features.MirrorBuilder`

New in version NX8.0.1.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateMirrorCurveBuilder¶

FeatureCollection.CreateMirrorCurveBuilder¶

Creates a NXOpen.Features.MirrorCurveBuilder

Signature CreateMirrorCurveBuilder(mirrorCurve)

Parameters:	mirrorCurve (`NXOpen.Features.Feature`) – `NXOpen.Features.MirrorCurve` to be edited
Returns:
Return type:	`NXOpen.Features.MirrorCurveBuilder`

New in version NX6.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateMirrorFaceBuilder¶

FeatureCollection.CreateMirrorFaceBuilder¶

Creates a mirror face builder

Signature CreateMirrorFaceBuilder(mirrorFace)

Parameters:	mirrorFace (`NXOpen.Features.Feature`) – `NXOpen.Features.Feature` to be edited
Returns:	Features.MirrorFaceBuilder object
Return type:	`NXOpen.Features.MirrorFaceBuilder`

New in version NX6.0.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”)

CreateMirrorFeatureBuilder¶

FeatureCollection.CreateMirrorFeatureBuilder¶

Creates NXOpen.Features.MirrorFeatureBuilder

Signature CreateMirrorFeatureBuilder(mirrorFea)

Parameters:	mirrorFea (`NXOpen.Features.Feature`) – `NXOpen.Features.MirrorFeatureBuilder` to be edited
Returns:	MirrorFeatureBuilder object
Return type:	`NXOpen.Features.MirrorFeatureBuilder`

New in version NX5.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateMoveFaceBuilder¶

FeatureCollection.CreateMoveFaceBuilder¶

Create a move face builder, don’t use it until nx502

Signature CreateMoveFaceBuilder(moveFace)

Parameters:	moveFace (`NXOpen.Features.Feature`) – `NXOpen.Features.Feature` to be edited
Returns:	Features.MoveFaceBuilder object
Return type:	`NXOpen.Features.MoveFaceBuilder`

New in version NX5.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateNSidedSurfaceBuilder¶

FeatureCollection.CreateNSidedSurfaceBuilder¶

Creates a NXOpen.Features.NSidedSurfaceBuilder

Signature CreateNSidedSurfaceBuilder(nsidedSurface)

Parameters:	nsidedSurface (`NXOpen.Features.NSidedSurface`) – `NXOpen.Features.NSidedSurface` to be edited
Returns:
Return type:	`NXOpen.Features.NSidedSurfaceBuilder`

New in version NX6.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”) OR studio_free_form (“STUDIO FREE FORM”)

CreateNestModuleBuilder¶

FeatureCollection.CreateNestModuleBuilder¶

Creates a NXOpen.GeometricUtilities.NestModuleBuilder

This API is now deprecated. Please use NXOpen.Features.FeatureCollection instead.

Signature CreateNestModuleBuilder()

Returns:	Returns a `NXOpen.GeometricUtilities.NestModuleBuilder` builder
Return type:	`NXOpen.GeometricUtilities.NestModuleBuilder`

New in version NX9.0.0.

Deprecated since version NX10.0.0: Please use NXOpen.Features.FeatureCollection instead.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateOffsetCurveBuilder¶

FeatureCollection.CreateOffsetCurveBuilder¶

Creates a NXOpen.Features.OffsetCurveBuilder

Signature CreateOffsetCurveBuilder(offsetCurve)

Parameters:	offsetCurve (`NXOpen.Features.Feature`) – `NXOpen.Features.OffsetCurve` to be edited
Returns:	Offset Curve Builder object
Return type:	`NXOpen.Features.OffsetCurveBuilder`

New in version NX5.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”) OR drafting (“DRAFTING”)

CreateOffsetEmbossBuilder¶

FeatureCollection.CreateOffsetEmbossBuilder¶

Creates a Offsetemboss builder

Signature CreateOffsetEmbossBuilder(offsetEmboss)

Parameters:	offsetEmboss (`NXOpen.Features.Feature`) – `NXOpen.Features.OffsetEmbossBuilder` to be edited
Returns:	OffsetEmbossBuilder object
Return type:	`NXOpen.Features.OffsetEmbossBuilder`

New in version NX5.0.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”)

CreateOffsetFaceBuilder¶

FeatureCollection.CreateOffsetFaceBuilder¶

Creates a NXOpen.Features.OffsetFaceBuilder

Signature CreateOffsetFaceBuilder(offsetface)

Parameters:	offsetface (`NXOpen.Features.Feature`) – `NXOpen.Features.OffsetFace` to be edited, if None then create a new one
Returns:	OffsetFaceBuilder object
Return type:	`NXOpen.Features.OffsetFaceBuilder`

New in version NX5.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateOffsetRegionBuilder¶

FeatureCollection.CreateOffsetRegionBuilder¶

Creates an offset region builder, don’t use it until nx502

Signature CreateOffsetRegionBuilder(offsetRegion)

Parameters:	offsetRegion (`NXOpen.Features.Feature`) – `NXOpen.Features.Feature` to be edited
Returns:	Features.OffsetRegionBuilder object
Return type:	`NXOpen.Features.OffsetRegionBuilder`

New in version NX5.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateOffsetSurfaceBuilder¶

FeatureCollection.CreateOffsetSurfaceBuilder¶

Creates an Offset Surface builder

Signature CreateOffsetSurfaceBuilder(offsetSurface)

Parameters:	offsetSurface (`NXOpen.Features.Feature`) – `NXOpen.Features.Feature` to be edited
Returns:	OffsetSurfaceBuilder object
Return type:	`NXOpen.Features.OffsetSurfaceBuilder`

New in version NX4.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateOptimizeCurveBuilder¶

FeatureCollection.CreateOptimizeCurveBuilder¶

Creates a NXOpen.Features.OptimizeCurveBuilder

Signature CreateOptimizeCurveBuilder()

Returns:	OptimizeCurveBuilder object
Return type:	`NXOpen.Features.OptimizeCurveBuilder`

New in version NX10.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateOptimizeFaceBuilder¶

FeatureCollection.CreateOptimizeFaceBuilder¶

Creates a NXOpen.Features.OptimizeFaceBuilder

Signature CreateOptimizeFaceBuilder()

Returns:
Return type:	`NXOpen.Features.OptimizeFaceBuilder`

New in version NX7.0.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”)

CreateOvercrownFeatureBuilder¶

FeatureCollection.CreateOvercrownFeatureBuilder¶

Creates a Overcrown feature builder

Signature CreateOvercrownFeatureBuilder(overcrown)

Parameters:	overcrown (`NXOpen.Features.Feature`) – `NXOpen.Features.OvercrownBuilder` to be edited, if None then create a new one.
Returns:	OvercrownBuilder object
Return type:	`NXOpen.Features.OvercrownBuilder`

New in version NX4.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreatePaintParametersBuilder¶

FeatureCollection.CreatePaintParametersBuilder¶

Creates a NXOpen.Features.PaintParametersBuilder

Signature CreatePaintParametersBuilder()

Returns:
Return type:	`NXOpen.Features.PaintParametersBuilder`

New in version NX9.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateParallelBuilder¶

FeatureCollection.CreateParallelBuilder¶

Creates a NXOpen.Features.ParallelBuilder

Signature CreateParallelBuilder(parallel)

Parameters:	parallel (`NXOpen.Features.Parallel`) – `NXOpen.Features.Parallel` to be edited
Returns:
Return type:	`NXOpen.Features.ParallelBuilder`

New in version NX6.0.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”)

CreatePartModuleBuilder¶

FeatureCollection.CreatePartModuleBuilder¶

Creates a NXOpen.Features.PartModuleBuilder

Signature CreatePartModuleBuilder(partModule)

Parameters:	partModule (`NXOpen.Features.PartModule`) – `NXOpen.Features.PartModule` to be edited
Returns:
Return type:	`NXOpen.Features.PartModuleBuilder`

New in version NX8.0.0.

License requirements: usr_defined_features (“USER DEFINED FEATURES”)

CreatePartModuleRelationshipBuilder¶

FeatureCollection.CreatePartModuleRelationshipBuilder¶

Creates a NXOpen.GeometricUtilities.PartModuleRelationshipBuilder

Signature CreatePartModuleRelationshipBuilder(partModule)

Parameters:	partModule (`NXOpen.Features.PartModule`) – `NXOpen.Features.PartModule` to be edited
Returns:
Return type:	`NXOpen.GeometricUtilities.PartModuleRelationshipBuilder`

New in version NX8.0.0.

License requirements: usr_defined_features (“USER DEFINED FEATURES”)

CreatePasteFaceBuilder¶

FeatureCollection.CreatePasteFaceBuilder¶

Creates a paste face builder

Signature CreatePasteFaceBuilder(pasteFace)

Parameters:	pasteFace (`NXOpen.Features.Feature`) – `NXOpen.Features.Feature` to be edited
Returns:	Features.PasteFaceBuilder object
Return type:	`NXOpen.Features.PasteFaceBuilder`

New in version NX6.0.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”)

CreatePatchBuilder¶

FeatureCollection.CreatePatchBuilder¶

Creates a NXOpen.Features.PatchBuilder

Signature CreatePatchBuilder(patch)

Parameters:	patch (`NXOpen.Features.Feature`) – Patch Features to be edited
Returns:	PatchBuilder object
Return type:	`NXOpen.Features.PatchBuilder`

New in version NX5.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreatePatchOpeningsBuilder¶

FeatureCollection.CreatePatchOpeningsBuilder¶

Creates a NXOpen.Features.PatchOpeningsBuilder

Signature CreatePatchOpeningsBuilder(patchOpenings)

Parameters:	patchOpenings (`NXOpen.Features.Feature`) – `NXOpen.Features.Feature` to be edited
Returns:
Return type:	`NXOpen.Features.PatchOpeningsBuilder`

New in version NX5.0.0.

License requirements: None.

CreatePatternFaceBuilder¶

FeatureCollection.CreatePatternFaceBuilder¶

Creates a pattern face builder, don’t use it until nx502

Signature CreatePatternFaceBuilder(patternFace)

Parameters:	patternFace (`NXOpen.Features.Feature`) – `NXOpen.Features.Feature` to be edited
Returns:	Features.PatternFaceBuilder object
Return type:	`NXOpen.Features.PatternFaceBuilder`

New in version NX5.0.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”)

CreatePatternFaceFeatureBuilder¶

FeatureCollection.CreatePatternFaceFeatureBuilder¶

Creates a NXOpen.Features.PatternFaceFeatureBuilder

Signature CreatePatternFaceFeatureBuilder(patternFaceFeature)

Parameters:	patternFaceFeature (`NXOpen.Features.PatternFaceFeature`) – `NXOpen.Features.PatternFaceFeature` to be edited
Returns:
Return type:	`NXOpen.Features.PatternFaceFeatureBuilder`

New in version NX9.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”)

CreatePatternFeatureBuilder¶

FeatureCollection.CreatePatternFeatureBuilder¶

Creates NXOpen.Features.PatternFeatureBuilder

Signature CreatePatternFeatureBuilder(patternFeature)

Parameters:	patternFeature (`NXOpen.Features.Feature`) – `NXOpen.Features.PatternFeatureBuilder` to be edited
Returns:	PatternFeatureBuilder object
Return type:	`NXOpen.Features.PatternFeatureBuilder`

New in version NX7.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreatePatternGeometryBuilder¶

FeatureCollection.CreatePatternGeometryBuilder¶

Creates a NXOpen.Features.PatternGeometryBuilder

Signature CreatePatternGeometryBuilder(patternGeometry)

Parameters:	patternGeometry (`NXOpen.Features.PatternGeometry`) – The feature class `NXOpen.Features.PatternGeometry`
Returns:	The builder for the feature class
Return type:	`NXOpen.Features.PatternGeometryBuilder`

New in version NX9.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreatePedestrianProtectionBuilder¶

FeatureCollection.CreatePedestrianProtectionBuilder¶

Creates a NXOpen.Features.VehicleDesign.PedestrianProtectionBuilder

Signature CreatePedestrianProtectionBuilder(pedestrianProtection)

Parameters:	pedestrianProtection (`NXOpen.Features.Feature`) – feature to be edited
Returns:
Return type:	`NXOpen.Features.FeatureBuilder`

New in version NX6.0.0.

Deprecated since version NX9.0.0: Use NXOpen.Features.VehicleDesignCollection.CreatePedestrianProtectionBuilder instead.

License requirements: nx_general_packaging (“NX General Packaging”)

CreatePerpendicularBuilder¶

FeatureCollection.CreatePerpendicularBuilder¶

Creates a NXOpen.Features.PerpendicularBuilder

Signature CreatePerpendicularBuilder(perpendicular)

Parameters:	perpendicular (`NXOpen.Features.Perpendicular`) – `NXOpen.Features.Perpendicular` to be edited
Returns:	Features.

PerpendicularBuilder object :rtype: NXOpen.Features.PerpendicularBuilder

New in version NX6.0.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”)

CreatePointSetBuilder¶

FeatureCollection.CreatePointSetBuilder¶

Creates a NXOpen.Features.PointSetBuilder

Signature CreatePointSetBuilder(pointSet)

Parameters:	pointSet (`NXOpen.Features.PointSet`) – `NXOpen.Features.PointSet` to be edited
Returns:
Return type:	`NXOpen.Features.PointSetBuilder`

New in version NX6.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreatePoleSmoothingBuilder¶

FeatureCollection.CreatePoleSmoothingBuilder¶

Creates a NXOpen.Features.PoleSmoothingBuilder

Signature CreatePoleSmoothingBuilder(poleSmoothing)

Parameters:	poleSmoothing (`NXOpen.Features.PoleSmoothing`) – `NXOpen.Features.PoleSmoothing` to be edited
Returns:
Return type:	`NXOpen.Features.PoleSmoothingBuilder`

New in version NX6.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateProjectCurveBuilder¶

FeatureCollection.CreateProjectCurveBuilder¶

Creates a NXOpen.Features.ProjectCurveBuilder

Signature CreateProjectCurveBuilder(projectCurve)

Parameters:	projectCurve (`NXOpen.Features.Feature`) – `NXOpen.Features.ProjectCurve` to be edited
Returns:	ProjectCurveBuilder object
Return type:	`NXOpen.Features.ProjectCurveBuilder`

New in version NX5.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”)

CreatePromotionBuilder¶

FeatureCollection.CreatePromotionBuilder¶

Creates a NXOpen.Features.PromotionBuilder

Signature CreatePromotionBuilder(promotion)

Parameters:	promotion (`NXOpen.Features.Promotion`) – `NXOpen.Features.Promotion` to be edited
Returns:
Return type:	`NXOpen.Features.PromotionBuilder`

New in version NX6.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreatePullFaceBuilder¶

FeatureCollection.CreatePullFaceBuilder¶

Creates a NXOpen.Features.PullFaceBuilder

Signature CreatePullFaceBuilder(pullFace)

Parameters:	pullFace (`NXOpen.Features.PullFace`) – `NXOpen.Features.PullFace` to be edited
Returns:
Return type:	`NXOpen.Features.PullFaceBuilder`

New in version NX6.0.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”)

CreateRadialDimensionBuilder¶

FeatureCollection.CreateRadialDimensionBuilder¶

Creates a NXOpen.Features.RadialDimensionBuilder

Signature CreateRadialDimensionBuilder(radialDimension)

Parameters:	radialDimension (`NXOpen.Features.RadialDimension`) – `NXOpen.Features.RadialDimension` to be edited
Returns:
Return type:	`NXOpen.Features.RadialDimensionBuilder`

New in version NX6.0.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”)

CreateRapidSurfaceBuilder¶

FeatureCollection.CreateRapidSurfaceBuilder¶

Creates a Rapid Surfacing feature builder

Signature CreateRapidSurfaceBuilder(rapidSurface)

Parameters:	rapidSurface (`NXOpen.Features.RapidSurface`) – `NXOpen.Features.RapidSurface` to be edited
Returns:	RapidSurfaceBuilder object
Return type:	`NXOpen.Features.RapidSurfaceBuilder`

New in version NX5.0.0.

License requirements: studio_free_form (“STUDIO FREE FORM”)

CreateRasterImage¶

FeatureCollection.CreateRasterImage¶

Creates a raster image

Signature CreateRasterImage(origin, matrix, length, height, imageFileName, translucency, maximumTextureSize)

Parameters:	origin (`NXOpen.Point3d`) – The origin for the raster image matrix (`NXOpen.Matrix3x3`) – The rotation matrix for the raster image length (float) – Length of the image, given in the units parameter height (float) – Height of the image, give in the units parameter imageFileName (str) – Name of the image file to use. For now, it must be a .tif file NOTE: The full Unicode character set is not supported for this parameter. translucency (float) – 0.0 for no translucency, 1.0 for fully tranparent maximumTextureSize (`NXOpen.Features.RasterImageMaxTextureSize`) –
Returns:	RasterImage object
Return type:	`NXOpen.Features.RasterImage`

New in version NX4.0.0.

License requirements: studio_visualize (“STUDIO VISUALIZE”)

CreateReferenceMapperBuilder¶

FeatureCollection.CreateReferenceMapperBuilder¶

Creates a NXOpen.Features.ReferenceMapperBuilder

Signature CreateReferenceMapperBuilder(booleanBuilderTag)

Parameters:	booleanBuilderTag (`NXOpen.Features.FeatureBuilder`) – `NXOpen.Features.FeatureBuilder`
Returns:	ReferenceMapperBuilder
Return type:	`NXOpen.Features.ReferenceMapperBuilder`

New in version NX7.5.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateRefitFaceBuilder¶

FeatureCollection.CreateRefitFaceBuilder¶

Creates a RefitFaceBuilder

Signature CreateRefitFaceBuilder(refitFace)

Parameters:	refitFace (`NXOpen.Features.RefitFace`) – `NXOpen.Features.RefitFace` to be edited
Returns:
Return type:	`NXOpen.Features.RefitFaceBuilder`

New in version NX6.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateReflectionDataBuilder¶

FeatureCollection.CreateReflectionDataBuilder¶

Creates a NXOpen.Features.VehicleDesign.ReflectionDataBuilder

Signature CreateReflectionDataBuilder(reflectionData)

Parameters:	reflectionData (`NXOpen.Features.Feature`) – Feature to be edited
Returns:
Return type:	`NXOpen.Features.FeatureBuilder`

New in version NX6.0.0.

Deprecated since version NX9.0.0: Use NXOpen.Features.VehicleDesignCollection.CreateReflectionDataBuilder instead.

License requirements: nx_general_packaging (“NX General Packaging”)

CreateRemoveParametersBuilder¶

FeatureCollection.CreateRemoveParametersBuilder¶

Creates a NXOpen.Features.RemoveParametersBuilder

Signature CreateRemoveParametersBuilder()

Returns:	Features.

RemoveParametersBuilder object :rtype: NXOpen.Features.RemoveParametersBuilder

New in version NX6.0.0.

License requirements: None.

CreateRenameLinkedPartModulePartBuilder¶

FeatureCollection.CreateRenameLinkedPartModulePartBuilder¶

Creates a NXOpen.GeometricUtilities.RenameLinkedPartModulePartBuilder

Signature CreateRenameLinkedPartModulePartBuilder()

Returns:
Return type:	`NXOpen.GeometricUtilities.RenameLinkedPartModulePartBuilder`

New in version NX9.0.0.

License requirements: None.

CreateReorderBlendsBuilder¶

FeatureCollection.CreateReorderBlendsBuilder¶

Creates a NXOpen.Features.ReorderBlendsBuilder

Signature CreateReorderBlendsBuilder(reorderBlends)

Parameters:	reorderBlends (`NXOpen.Features.ReorderBlends`) – `NXOpen.Features.ReorderBlends` to be edited
Returns:
Return type:	`NXOpen.Features.ReorderBlendsBuilder`

New in version NX7.5.1.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”)

CreateReplaceBlendBuilder¶

FeatureCollection.CreateReplaceBlendBuilder¶

Creates a NXOpen.Features.ReplaceBlendBuilder

Signature CreateReplaceBlendBuilder(replaceBlend)

Parameters:	replaceBlend (`NXOpen.Features.ReplaceBlend`) – `NXOpen.Features.ReplaceBlend` to be edited
Returns:	`NXOpen.Features.ReplaceBlendBuilder` object
Return type:	`NXOpen.Features.ReplaceBlendBuilder`

New in version NX7.0.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”)

CreateReplaceFaceBuilder¶

FeatureCollection.CreateReplaceFaceBuilder¶

Creates a replace face builder, don’t use it until nx502

Signature CreateReplaceFaceBuilder(replaceFace)

Parameters:	replaceFace (`NXOpen.Features.Feature`) – `NXOpen.Features.Feature` to be edited
Returns:	Features.ReplaceFaceBuilder object
Return type:	`NXOpen.Features.ReplaceFaceBuilder`

New in version NX5.0.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”)

CreateReplaceFeatureBuilder¶

FeatureCollection.CreateReplaceFeatureBuilder¶

Creates a NXOpen.Features.ReplaceFeatureBuilder

Signature CreateReplaceFeatureBuilder()

Returns:
Return type:	`NXOpen.Features.ReplaceFeatureBuilder`

New in version NX6.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateResizeBlendBuilder¶

FeatureCollection.CreateResizeBlendBuilder¶

Creates a resize blend builder, don’t use it until nx502

Signature CreateResizeBlendBuilder(resizeBlend)

Parameters:	resizeBlend (`NXOpen.Features.Feature`) – `NXOpen.Features.Feature` to be edited
Returns:	Features.ResizeBlendBuilder object
Return type:	`NXOpen.Features.ResizeBlendBuilder`

New in version NX5.0.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”)

CreateResizeChamferBuilder¶

FeatureCollection.CreateResizeChamferBuilder¶

Creates a NXOpen.Features.ResizeChamferBuilder

Signature CreateResizeChamferBuilder(resizeChamfer)

Parameters:	resizeChamfer (`NXOpen.Features.ResizeChamfer`) – `NXOpen.Features.ResizeChamfer` to be edited
Returns:
Return type:	`NXOpen.Features.ResizeChamferBuilder`

New in version NX7.0.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”)

CreateResizeFaceBuilder¶

FeatureCollection.CreateResizeFaceBuilder¶

Creates a resize face builder, don’t use it until nx502

Signature CreateResizeFaceBuilder(resizeFace)

Parameters:	resizeFace (`NXOpen.Features.Feature`) – `NXOpen.Features.Feature` to be edited
Returns:	Features.ResizeFaceBuilder object
Return type:	`NXOpen.Features.ResizeFaceBuilder`

New in version NX5.0.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”)

CreateResizePlaneBuilder¶

FeatureCollection.CreateResizePlaneBuilder¶

Creates a Resize Datum Plane feature builder

Signature CreateResizePlaneBuilder(resizePlane)

Parameters:	resizePlane (`NXOpen.Features.Feature`) – `NXOpen.Features.DatumPlaneFeature` to be edited
Returns:	ResizePlaneBuilder object
Return type:	`NXOpen.Features.ResizePlaneBuilder`

New in version NX6.0.3.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateRevolveBuilder¶

FeatureCollection.CreateRevolveBuilder¶

Creates a Revolve builder

Signature CreateRevolveBuilder(revolve)

Parameters:	revolve (`NXOpen.Features.Feature`) – `NXOpen.Features.RevolveBuilder` to be edited, if None then create a new one
Returns:	RevolveBuilder object
Return type:	`NXOpen.Features.RevolveBuilder`

New in version NX3.0.1.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateRibbonBuilder¶

FeatureCollection.CreateRibbonBuilder¶

Creates a ribbon builder

Signature CreateRibbonBuilder(ribbon)

Parameters:	ribbon (`NXOpen.Features.Feature`) – `NXOpen.Features.Feature` to be edited
Returns:	Features.RibbonBuilder object
Return type:	`NXOpen.Features.RibbonBuilder`

New in version NX6.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateRpoBuilder¶

FeatureCollection.CreateRpoBuilder¶

Creates a Relative Positioning Object builder

Signature CreateRpoBuilder(rpo)

Parameters:	rpo (`NXOpen.Features.Feature`) – `NXOpen.Features.Feature` to be repositioned
Returns:	RPOBuilder object
Return type:	`NXOpen.Features.RPOBuilder`

New in version NX3.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateRuledBuilder¶

FeatureCollection.CreateRuledBuilder¶

Creates a Ruled Surface builder

Signature CreateRuledBuilder(ruled)

Parameters:	ruled (`NXOpen.Features.Feature`) – `NXOpen.Features.Feature` to be edited
Returns:
Return type:	`NXOpen.Features.RuledBuilder`

New in version NX6.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateScaleBuilder¶

FeatureCollection.CreateScaleBuilder¶

Creates a NXOpen.Features.ScaleBuilder

Signature CreateScaleBuilder(scale)

Parameters:	scale (`NXOpen.Features.Feature`) – `NXOpen.Features.Scale` to be edited
Returns:	ScaleBuilder object
Return type:	`NXOpen.Features.ScaleBuilder`

New in version NX5.0.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”)

CreateSeatBeltAnchorageBuilder¶

FeatureCollection.CreateSeatBeltAnchorageBuilder¶

Creates a NXOpen.Features.VehicleDesign.SeatBeltAnchorageBuilder

Signature CreateSeatBeltAnchorageBuilder(seatBeltAnchorage)

Parameters:	seatBeltAnchorage (`NXOpen.Features.Feature`) – Feature to be edited
Returns:
Return type:	`NXOpen.Features.FeatureBuilder`

New in version NX6.0.0.

Deprecated since version NX9.0.0: Use Features.VehicleDesignCollection.CreateSeatBeltAnchorageBuilder instead.

License requirements: nx_general_packaging (“NX General Packaging”)

CreateSectionCurveBuilder¶

FeatureCollection.CreateSectionCurveBuilder¶

Creates a NXOpen.Features.SectionCurveBuilder

Signature CreateSectionCurveBuilder(sectionCurves)

Parameters:	sectionCurves (`NXOpen.Features.Feature`) – `NXOpen.Features.SectionCurve` to be edited
Returns:
Return type:	`NXOpen.Features.SectionCurveBuilder`

New in version NX5.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateSectionEditBuilder¶

FeatureCollection.CreateSectionEditBuilder¶

Creates a NXOpen.Features.SectionEditBuilder

Signature CreateSectionEditBuilder(sectionEdit)

Parameters:	sectionEdit (`NXOpen.Features.SectionEdit`) – `NXOpen.Features.SectionEdit` to be edited
Returns:
Return type:	`NXOpen.Features.SectionEditBuilder`

New in version NX6.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateSectionInertiaAnalysisBuilder¶

FeatureCollection.CreateSectionInertiaAnalysisBuilder¶

Creates a NXOpen.Features.SectionInertiaAnalysisBuilder

Signature CreateSectionInertiaAnalysisBuilder(sectionInertiaAnalysis)

Parameters:	sectionInertiaAnalysis (`NXOpen.Features.SectionInertiaAnalysis`) – `NXOpen.Features.SectionInertiaAnalysis` to be edited
Returns:
Return type:	`NXOpen.Features.SectionInertiaAnalysisBuilder`

New in version NX5.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateSectionSurfaceBuilder¶

FeatureCollection.CreateSectionSurfaceBuilder¶

Create a section surface

Signature CreateSectionSurfaceBuilder(sectionSurface)

Parameters:	sectionSurface (`NXOpen.Features.SectionSurface`) – `NXOpen.Features.SectionSurface` to be edited
Returns:
Return type:	`NXOpen.Features.SectionSurfaceBuilder`

New in version NX6.0.0.

Deprecated since version NX9.0.0: Use NXOpen.Features.FeatureCollection.CreateSectionSurfaceBuilderEx instead.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateSectionSurfaceBuilderEx¶

FeatureCollection.CreateSectionSurfaceBuilderEx¶

Creates a NXOpen.Features.SectionSurfaceBuilderEx

Signature CreateSectionSurfaceBuilderEx(sectionSurfaceEx)

Parameters:	sectionSurfaceEx (`NXOpen.Features.SectionSurface`) – `NXOpen.Features.SectionSurface` to be edited
Returns:
Return type:	`NXOpen.Features.SectionSurfaceBuilderEx`

New in version NX9.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateSewBuilder¶

FeatureCollection.CreateSewBuilder¶

Creates a Sew feature builder

Signature CreateSewBuilder(sew)

Parameters:	sew (`NXOpen.Features.Feature`) – `NXOpen.Features.SewBuilder` to be edited
Returns:	SewBuilder object
Return type:	`NXOpen.Features.SewBuilder`

New in version NX5.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”)

CreateShellBuilder¶

FeatureCollection.CreateShellBuilder¶

Creates an Shell builder

Signature CreateShellBuilder(shell)

Parameters:	shell (`NXOpen.Features.Feature`) – `NXOpen.Features.ShellBuilder` to be edited
Returns:	ShellBuilder object
Return type:	`NXOpen.Features.ShellBuilder`

New in version NX4.0.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”)

CreateShellFaceBuilder¶

FeatureCollection.CreateShellFaceBuilder¶

Creates a NXOpen.Features.ShellFaceBuilder

Signature CreateShellFaceBuilder(shellFace)

Parameters:	shellFace (`NXOpen.Features.ShellFace`) – `NXOpen.Features.ShellFace` to be edited
Returns:	`NXOpen.Features.ShellFaceBuilder` object
Return type:	`NXOpen.Features.ShellFaceBuilder`

New in version NX6.0.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”)

CreateShowRelatedFacesBuilder¶

FeatureCollection.CreateShowRelatedFacesBuilder¶

Creates a NXOpen.Features.ShowRelatedFacesBuilder

Signature CreateShowRelatedFacesBuilder()

Returns:
Return type:	`NXOpen.Features.ShowRelatedFacesBuilder`

New in version NX7.0.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”)

CreateSilhouetteFlangeBuilder¶

FeatureCollection.CreateSilhouetteFlangeBuilder¶

Creates a NXOpen.Features.SilhouetteFlangeBuilder

Signature CreateSilhouetteFlangeBuilder(silhouetteFlange)

Parameters:	silhouetteFlange (`NXOpen.Features.SilhouetteFlange`) – `NXOpen.Features.SilhouetteFlange` to be edited
Returns:
Return type:	`NXOpen.Features.SilhouetteFlangeBuilder`

New in version NX6.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”) OR studio_free_form (“STUDIO FREE FORM”)

CreateSketchFitCurveBuilder¶

FeatureCollection.CreateSketchFitCurveBuilder¶

Creates a NXOpen.Features.SketchFitCurveBuilder

Signature CreateSketchFitCurveBuilder(fitCurve)

Parameters:	fitCurve (`NXOpen.Curve`) – `NXOpen.Curve` to be edited
Returns:	SketchFitCurveBuilder object
Return type:	`NXOpen.Features.SketchFitCurveBuilder`

New in version NX8.5.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateSketchSplineBuilder¶

FeatureCollection.CreateSketchSplineBuilder¶

Creates a Studio Spline builder for sketcher

Signature CreateSketchSplineBuilder(spline)

Parameters:	spline (`NXOpen.Spline`) – `NXOpen.Spline` to be edited
Returns:	SketchSplineBuilder object
Return type:	`NXOpen.Features.SketchSplineBuilder`

New in version NX8.0.0.

License requirements: features_modeling (“FEATURES MODELING”) OR geometric_tol (“GDT”), solid_modeling (“SOLIDS MODELING”) OR geometric_tol (“GDT”)

CreateSmoothSplineBuilder¶

FeatureCollection.CreateSmoothSplineBuilder¶

Creates a NXOpen.Features.SmoothSplineBuilder

Signature CreateSmoothSplineBuilder(smoothSpline)

Parameters:	smoothSpline (`NXOpen.Features.SmoothSpline`) – `NXOpen.Features.SmoothSpline` to be edited
Returns:
Return type:	`NXOpen.Features.SmoothSplineBuilder`

New in version NX6.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”) OR drafting (“DRAFTING”)

CreateSnipSurfaceBuilder¶

FeatureCollection.CreateSnipSurfaceBuilder¶

Creates a NXOpen.Features.SnipSurfaceBuilder

Signature CreateSnipSurfaceBuilder(snipSurface)

Parameters:	snipSurface (`NXOpen.Features.SnipSurface`) – `NXOpen.Features.SnipSurface` to be edited
Returns:
Return type:	`NXOpen.Features.SnipSurfaceBuilder`

New in version NX6.0.0.

License requirements: studio_free_form (“STUDIO FREE FORM”)

CreateSphereBuilder¶

FeatureCollection.CreateSphereBuilder¶

Creates a NXOpen.Features.SphereBuilder

Signature CreateSphereBuilder(sphere)

Parameters:	sphere (`NXOpen.Features.Sphere`) – `NXOpen.Features.Sphere` to be edited
Returns:
Return type:	`NXOpen.Features.SphereBuilder`

New in version NX6.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateSphericalCornerBuilder¶

FeatureCollection.CreateSphericalCornerBuilder¶

Creates a NXOpen.Features.SphericalCornerBuilder

Signature CreateSphericalCornerBuilder(sphericalCorner)

Parameters:	sphericalCorner (`NXOpen.Features.SphericalCorner`) – `NXOpen.Features.SphericalCorner` to be edited
Returns:
Return type:	`NXOpen.Features.SphericalCornerBuilder`

New in version NX8.5.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”)

CreateSplitBodyBuilder¶

FeatureCollection.CreateSplitBodyBuilder¶

Creates a NXOpen.Features.SplitBodyBuilder

Signature CreateSplitBodyBuilder(splitBody)

Parameters:	splitBody (`NXOpen.Features.SplitBody`) – `NXOpen.Features.SplitBody` to be edited
Returns:
Return type:	`NXOpen.Features.SplitBodyBuilder`

New in version NX6.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateSplitBodyBuilderUsingCollector¶

FeatureCollection.CreateSplitBodyBuilderUsingCollector¶

Creates a NXOpen.Features.SplitBodyBuilder.

Leverage body collectors if possible

Signature CreateSplitBodyBuilderUsingCollector(splitBody)

Parameters:	splitBody (`NXOpen.Features.SplitBody`) – `NXOpen.Features.SplitBody` to be edited
Returns:
Return type:	`NXOpen.Features.SplitBodyBuilder`

New in version NX7.5.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateStudioSplineBuilder¶

FeatureCollection.CreateStudioSplineBuilder¶

Creates a Studio Spline builder

Signature CreateStudioSplineBuilder(splineFeature)

Parameters:	splineFeature (`NXOpen.Features.StudioSpline`) – `NXOpen.Features.StudioSpline` to be edited
Returns:	StudioSplineBuilder object
Return type:	`NXOpen.Features.StudioSplineBuilder`

New in version NX5.0.0.

Deprecated since version NX8.0.0: Use NXOpen.Features.FeatureCollection.CreateStudioSplineBuilderEx instead.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”)

CreateStudioSplineBuilderEx¶

FeatureCollection.CreateStudioSplineBuilderEx¶

Creates a Studio Spline builder

Signature CreateStudioSplineBuilderEx(spline)

Parameters:	spline (`NXOpen.NXObject`) – `NXOpen.Features.StudioSpline` or `NXOpen.Spline` to be edited
Returns:	StudioSplineBuilderEx object
Return type:	`NXOpen.Features.StudioSplineBuilderEx`

New in version NX8.0.0.

License requirements: features_modeling (“FEATURES MODELING”) OR cam_base (“CAM BASE”), solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”)

CreateStudioSurfaceBuilder¶

FeatureCollection.CreateStudioSurfaceBuilder¶

Creates a Studio Surface Builder

Signature CreateStudioSurfaceBuilder(studioSurface)

Parameters:	studioSurface (`NXOpen.Features.Feature`) – `NXOpen.Features.StudioSurface` to be edited
Returns:	StudioSurfaceBuilder

object :rtype: NXOpen.Features.StudioSurfaceBuilder

New in version NX5.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateStudioXformBuilder¶

FeatureCollection.CreateStudioXformBuilder¶

Creates a Features.

StudioXformBuilder

Signature CreateStudioXformBuilder(studioXform)

Parameters:	studioXform (`NXOpen.Features.StudioXform`) – `NXOpen.Features.StudioXform` to be edited
Returns:
Return type:	`NXOpen.Features.StudioXformBuilder`

New in version NX6.0.0.

Deprecated since version NX8.5.0: Use NXOpen.Features.FeatureCollection.CreateStudioXformBuilderEx instead.

License requirements: studio_free_form (“STUDIO FREE FORM”)

CreateStudioXformBuilderEx¶

FeatureCollection.CreateStudioXformBuilderEx¶

Creates a Features.

StudioXformBuilderEx

Signature CreateStudioXformBuilderEx(studioXform1)

Parameters:	studioXform1 (`NXOpen.Features.StudioXform`) – `NXOpen.Features.StudioXform` to be edited
Returns:
Return type:	`NXOpen.Features.StudioXformBuilderEx`

New in version NX7.0.0.

License requirements: studio_free_form (“STUDIO FREE FORM”)

CreateStyledBlendBuilder¶

FeatureCollection.CreateStyledBlendBuilder¶

Creates a NXOpen.Features.StyledBlendBuilder

Signature CreateStyledBlendBuilder(styledBlend)

Parameters:	styledBlend (`NXOpen.Features.StyledBlend`) – `NXOpen.Features.StyledBlend` to be edited
Returns:
Return type:	`NXOpen.Features.StyledBlendBuilder`

New in version NX6.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”) OR studio_free_form (“STUDIO FREE FORM”)

CreateStyledCornerBuilder¶

FeatureCollection.CreateStyledCornerBuilder¶

Creates a NXOpen.Features.StyledCornerBuilder

Signature CreateStyledCornerBuilder(styledCorner)

Parameters:	styledCorner (`NXOpen.Features.StyledCorner`) – `NXOpen.Features.StyledCorner` to be edited
Returns:
Return type:	`NXOpen.Features.StyledCornerBuilder`

New in version NX6.0.0.

License requirements: studio_free_form (“STUDIO FREE FORM”)

CreateStyledSweepBuilder¶

FeatureCollection.CreateStyledSweepBuilder¶

Creates a NXOpen.Features.StyledSweepBuilder

Signature CreateStyledSweepBuilder(styledSweep)

Parameters:	styledSweep (`NXOpen.Features.Feature`) – `NXOpen.Features.StyledSweep` to be edited
Returns:	Features.

StyledSweepBuilder object :rtype: NXOpen.Features.StyledSweepBuilder

New in version NX6.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”) OR studio_free_form (“STUDIO FREE FORM”)

CreateSubtractFeature¶

FeatureCollection.CreateSubtractFeature¶

Creates a subtract feature.

Signature CreateSubtractFeature(targetBody, retainTargetBody, toolBodies, retainToolBodies, allowNonAssociativeBoolean)

Parameters:	targetBody (`NXOpen.Body`) – Target body retainTargetBody (bool) – Retain option for target body toolBodies (list of `NXOpen.Body`) – Tool bodies retainToolBodies (bool) – Retain option for tool bodies allowNonAssociativeBoolean (bool) – Allow boolean operation even if it results into non-associative boolean
Returns:	a tuple
Return type:	A tuple consisting of (features, nonAssociativeBoolean, unparameterizedSolids). features is a list of `NXOpen.Features.BooleanFeature`. Array of boolean features nonAssociativeBoolean is a bool. True if operation resulted in a non-associative boolean. False otherwise unparameterizedSolids is a bool. True if operation resulted in unparameterized solids. False otherwise

New in version NX3.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateSweepAlongGuideBuilder¶

FeatureCollection.CreateSweepAlongGuideBuilder¶

Creates a NXOpen.Features.SweepAlongGuideBuilder

Signature CreateSweepAlongGuideBuilder(sweepAlongGuide)

Parameters:	sweepAlongGuide (`NXOpen.Features.SweepAlongGuide`) – `NXOpen.Features.SweepAlongGuide` to be edited
Returns:
Return type:	`NXOpen.Features.SweepAlongGuideBuilder`

New in version NX6.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateSweptBuilder¶

FeatureCollection.CreateSweptBuilder¶

Creates a NXOpen.Features.SweptBuilder

Signature CreateSweptBuilder(swept)

Parameters:	swept (`NXOpen.Features.Swept`) – `NXOpen.Features.Swept` to be edited
Returns:
Return type:	`NXOpen.Features.SweptBuilder`

New in version NX5.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateSymmetricBuilder¶

FeatureCollection.CreateSymmetricBuilder¶

Creates a NXOpen.Features.SymmetricBuilder

Signature CreateSymmetricBuilder(symmetric)

Parameters:	symmetric (`NXOpen.Features.Symmetric`) – `NXOpen.Features.Symmetric` to be edited
Returns:
Return type:	`NXOpen.Features.SymmetricBuilder`

New in version NX6.0.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”)

CreateTangentBuilder¶

FeatureCollection.CreateTangentBuilder¶

Creates a NXOpen.Features.TangentBuilder

Signature CreateTangentBuilder(tangent)

Parameters:	tangent (`NXOpen.Features.Tangent`) – `NXOpen.Features.Tangent` to be edited
Returns:	Features.

TangentBuilder object :rtype: NXOpen.Features.TangentBuilder

New in version NX6.0.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”)

CreateTextBuilder¶

FeatureCollection.CreateTextBuilder¶

Creates a NXOpen.Features.TextBuilder

Signature CreateTextBuilder(text)

Parameters:	text (`NXOpen.Features.Text`) – `NXOpen.Features.Text` to be edited
Returns:
Return type:	`NXOpen.Features.TextBuilder`

New in version NX7.5.1.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateThickenBuilder¶

FeatureCollection.CreateThickenBuilder¶

Creates a Thicken feature builder

Signature CreateThickenBuilder(thicken)

Parameters:	thicken (`NXOpen.Features.Feature`) – `NXOpen.Features.Thicken` to be edited
Returns:	ThickenBuilder object
Return type:	`NXOpen.Features.ThickenBuilder`

New in version NX5.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”)

CreateThroughCurveMeshBuilder¶

FeatureCollection.CreateThroughCurveMeshBuilder¶

Creates a NXOpen.Features.ThroughCurveMeshBuilder

Signature CreateThroughCurveMeshBuilder(throughCurveMesh)

Parameters:	throughCurveMesh (`NXOpen.Features.Feature`) – `NXOpen.Features.ThroughCurveMesh` to be edited, if None then create a new one
Returns:	ThroughCurveMeshBuilder object
Return type:	`NXOpen.Features.ThroughCurveMeshBuilder`

New in version NX5.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateThroughCurvesBuilder¶

FeatureCollection.CreateThroughCurvesBuilder¶

Creates a NXOpen.Features.ThroughCurvesBuilder

Signature CreateThroughCurvesBuilder(throughCurves)

Parameters:	throughCurves (`NXOpen.Features.Feature`) – `NXOpen.Features.ThroughCurves` to be edited, if None then create a new one
Returns:	ThroughCurvesBuilder object
Return type:	`NXOpen.Features.ThroughCurvesBuilder`

New in version NX5.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateTrimBody2Builder¶

FeatureCollection.CreateTrimBody2Builder¶

Creates a NXOpen.Features.TrimBody2Builder for Trim Body feature

Signature CreateTrimBody2Builder(trimBody2)

Parameters:	trimBody2 (`NXOpen.Features.TrimBody2`) – `NXOpen.Features.TrimBody2` to be edited
Returns:
Return type:	`NXOpen.Features.TrimBody2Builder`

New in version NX7.5.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateTrimBodyBuilder¶

FeatureCollection.CreateTrimBodyBuilder¶

Creates a trim body builder object.

Use this method only for editing pre-NX7.5.0 trim body features.. Use CreateTrimBody2Builder and NXOpen.Features.TrimBody2 to create and edit trim body features.

Signature CreateTrimBodyBuilder(trimbodyFeat)

Parameters:	trimbodyFeat (`NXOpen.Features.Feature`) – `NXOpen.Features.TrimBody` to be edited
Returns:	Features.TrimBodyBuilder object
Return type:	`NXOpen.Features.TrimBodyBuilder`

New in version NX4.0.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”)

CreateTrimCurveBuilder¶

FeatureCollection.CreateTrimCurveBuilder¶

Overloaded method CreateTrimCurveBuilder

CreateTrimCurveBuilder(trimCurve)
CreateTrimCurveBuilder(trimCurve)

-------------------------------------

Creates a NXOpen.Features.TrimCurveBuilder

Signature CreateTrimCurveBuilder(trimCurve)

Parameters:	trimCurve (`NXOpen.Features.TrimCurve`) – `NXOpen.Features.TrimCurve` to be edited
Returns:	Trim Curve Builder object
Return type:	`NXOpen.Features.TrimCurveBuilder`

New in version NX5.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”) OR drafting (“DRAFTING”) OR cam_base (“CAM BASE”)

-------------------------------------

Creates a NXOpen.Features.TrimCurveBuilder

Signature CreateTrimCurveBuilder(trimCurve)

Parameters:	trimCurve (`NXOpen.Spline`) – The trimmed curve to be edited
Returns:	Trim Curve Builder object
Return type:	`NXOpen.Features.TrimCurveBuilder`

New in version NX7.5.0.

License requirements: solid_modeling (“SOLIDS MODELING”) OR drafting (“DRAFTING”) OR cam_base (“CAM BASE”)

-------------------------------------

CreateTrimExtendBuilder¶

FeatureCollection.CreateTrimExtendBuilder¶

Creates a NXOpen.Features.TrimExtendBuilder

Signature CreateTrimExtendBuilder(trimExtend)

Parameters:	trimExtend (`NXOpen.Features.Feature`) – `NXOpen.Features.TrimExtend` to be edited
Returns:
Return type:	`NXOpen.Features.TrimExtendBuilder`

New in version NX5.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”)

CreateTrimsheetBuilder¶

FeatureCollection.CreateTrimsheetBuilder¶

Creates a NXOpen.Features.TrimSheetBuilder

Signature CreateTrimsheetBuilder(trimSheet)

Parameters:	trimSheet (`NXOpen.Features.Feature`) – `NXOpen.Features.TrimSheet` to be edited, if None then create a new one
Returns:	Trim Sheet Builder object
Return type:	`NXOpen.Features.TrimSheetBuilder`

New in version NX5.0.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”)

CreateTubeBuilder¶

FeatureCollection.CreateTubeBuilder¶

Creates a NXOpen.Features.TubeBuilder

Signature CreateTubeBuilder(tube)

Parameters:	tube (`NXOpen.Features.Feature`) – `NXOpen.Features.TubeBuilder` to be edited
Returns:	TubeBuilder object
Return type:	`NXOpen.Features.TubeBuilder`

New in version NX5.0.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”)

CreateUniteFeature¶

FeatureCollection.CreateUniteFeature¶

Creates a unite feature.

Signature CreateUniteFeature(targetBody, retainTargetBody, toolBodies, retainToolBodies, allowNonAssociativeBoolean)

Parameters:	targetBody (`NXOpen.Body`) – Target body retainTargetBody (bool) – Retain option for target body toolBodies (list of `NXOpen.Body`) – Tool bodies retainToolBodies (bool) – Retain option for tool bodies allowNonAssociativeBoolean (bool) – Allow boolean operation even if it results into non-associative boolean
Returns:	a tuple
Return type:	A tuple consisting of (features, nonAssociativeBoolean, unparameterizedSolids). features is a list of `NXOpen.Features.BooleanFeature`. Array of boolean features nonAssociativeBoolean is a bool. True if operation resulted in a non-associative boolean. False otherwise unparameterizedSolids is a bool. True if operation resulted in unparameterized solids. False otherwise

New in version NX3.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateUnnestModuleBuilder¶

FeatureCollection.CreateUnnestModuleBuilder¶

Creates a NXOpen.GeometricUtilities.UnnestModuleBuilder

This API is now deprecated. Please use NXOpen.Features.FeatureCollection instead.

Signature CreateUnnestModuleBuilder()

Returns:	Returns a `NXOpen.GeometricUtilities.UnnestModuleBuilder` builder
Return type:	`NXOpen.GeometricUtilities.UnnestModuleBuilder`

New in version NX9.0.0.

Deprecated since version NX10.0.0: Please use NXOpen.Features.FeatureCollection instead.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateUnsewBuilder¶

FeatureCollection.CreateUnsewBuilder¶

Creates a NXOpen.Features.UnsewBuilder

Signature CreateUnsewBuilder(unsew)

Parameters:	unsew (`NXOpen.Features.Unsew`) – `NXOpen.Features.Unsew` to be edited
Returns:
Return type:	`NXOpen.Features.UnsewBuilder`

New in version NX5.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateUntrimBuilder¶

FeatureCollection.CreateUntrimBuilder¶

Creates a NXOpen.Features.UntrimBuilder

Signature CreateUntrimBuilder(untrim)

Parameters:	untrim (`NXOpen.Features.Feature`) – `NXOpen.Features.Untrim` to be edited
Returns:	Features.

UntrimBuilder object :rtype: NXOpen.Features.UntrimBuilder

New in version NX5.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateUserDefinedObjectFeatureBuilder¶

FeatureCollection.CreateUserDefinedObjectFeatureBuilder¶

Creates a UserDefinedObjectFeature builder

Signature CreateUserDefinedObjectFeatureBuilder(udoFeature)

Parameters:	udoFeature (`NXOpen.Features.Feature`) – `NXOpen.Features.UserDefinedObjectFeature` to be edited - may be None if creating a new feature.
Returns:	UserDefinedObjectFeatureBuilder object
Return type:	`NXOpen.Features.UserDefinedObjectFeatureBuilder`

New in version NX5.0.0.

License requirements: None.

CreateVariableOffsetBuilder¶

FeatureCollection.CreateVariableOffsetBuilder¶

Creates a NXOpen.Features.VariableOffsetBuilder

Signature CreateVariableOffsetBuilder(variableOffset)

Parameters:	variableOffset (`NXOpen.Features.VariableOffset`) – `NXOpen.Features.VariableOffset` to be edited
Returns:
Return type:	`NXOpen.Features.VariableOffsetBuilder`

New in version NX8.0.0.

License requirements: studio_free_form (“STUDIO FREE FORM”)

CreateVarsweepBuilder¶

FeatureCollection.CreateVarsweepBuilder¶

Creates a Varsweep feature builder

Signature CreateVarsweepBuilder(varsweep)

Parameters:	varsweep (`NXOpen.Features.Feature`) – Varsweep to be edited
Returns:	VarsweepBuilder object
Return type:	`NXOpen.Features.VarsweepBuilder`

New in version NX4.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateVehicleCoordinateSystemBuilder¶

FeatureCollection.CreateVehicleCoordinateSystemBuilder¶

Creates a NXOpen.Features.VehicleDesign.VehicleCoordinateSystemBuilder

Signature CreateVehicleCoordinateSystemBuilder(vehicleCoordinateSystem)

Parameters:	vehicleCoordinateSystem (`NXOpen.Features.Feature`) – feature to be edited
Returns:
Return type:	`NXOpen.Features.FeatureBuilder`

New in version NX7.5.0.

Deprecated since version NX9.0.0: Use Features.VehicleDesignCollection.CreateHoodVisibilityBuilder instead.

License requirements: nx_general_packaging (“NX General Packaging”) OR ug_body_design (“Body Design”) OR nx_posture (“NX Jack Posture Prediction”)

CreateVirtualBlendEdgeBuilder¶

FeatureCollection.CreateVirtualBlendEdgeBuilder¶

Creates a NXOpen.Features.VirtualBlendEdgeBuilder

Signature CreateVirtualBlendEdgeBuilder()

Returns:
Return type:	`NXOpen.Features.VirtualBlendEdgeBuilder`

New in version NX7.0.1.

License requirements: None.

CreateVirtualCurveBuilder¶

FeatureCollection.CreateVirtualCurveBuilder¶

Creates a NXOpen.Features.VirtualCurveBuilder

Signature CreateVirtualCurveBuilder(virtualCurve)

Parameters:	virtualCurve (`NXOpen.Features.VirtualCurve`) – `NXOpen.Features.VirtualCurve` to be edited
Returns:
Return type:	`NXOpen.Features.VirtualCurveBuilder`

New in version NX7.5.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateVisionPlaneBuilder¶

FeatureCollection.CreateVisionPlaneBuilder¶

Creates a NXOpen.Features.VehicleDesign.VisionPlaneBuilder

Signature CreateVisionPlaneBuilder(visionPlane)

Parameters:	visionPlane (`NXOpen.Features.Feature`) – feature to be edited
Returns:
Return type:	`NXOpen.Features.FeatureBuilder`

New in version NX6.0.0.

Deprecated since version NX9.0.0: Use NXOpen.Features.VehicleDesignCollection.CreateVisionPlaneBuilder instead.

License requirements: nx_general_packaging (“NX General Packaging”)

CreateWaveDatumBuilder¶

FeatureCollection.CreateWaveDatumBuilder¶

Creates a Wavedatum Builder

Signature CreateWaveDatumBuilder(wavedatum)

Parameters:	wavedatum (`NXOpen.Features.Feature`) – Wavedatum Features to be edited
Returns:
Return type:	`NXOpen.Features.WaveDatumBuilder`

New in version NX5.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”) OR geometric_tol (“GDT”)

CreateWavePointBuilder¶

FeatureCollection.CreateWavePointBuilder¶

Creates a NXOpen.Features.WavePointBuilder

Signature CreateWavePointBuilder(wavepoint)

Parameters:	wavepoint (`NXOpen.Features.Feature`) – Wavepoint Features to be edited
Returns:
Return type:	`NXOpen.Features.WavePointBuilder`

New in version NX5.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”) OR cam_base (“CAM BASE”)

CreateWaveRoutingBuilder¶

FeatureCollection.CreateWaveRoutingBuilder¶

Creates a NXOpen.Features.WaveRoutingBuilder

Signature CreateWaveRoutingBuilder(waverouting)

Parameters:	waverouting (`NXOpen.Features.Feature`) – Waverouting Features to be edited
Returns:
Return type:	`NXOpen.Features.WaveRoutingBuilder`

New in version NX5.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateWaveSketchBuilder¶

FeatureCollection.CreateWaveSketchBuilder¶

Creates a Wavesketch Builder

Signature CreateWaveSketchBuilder(wavesketch)

Parameters:	wavesketch (`NXOpen.Features.Feature`) – Wavesketch Features to be edited
Returns:
Return type:	`NXOpen.Features.WaveSketchBuilder`

New in version NX5.0.1.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateWindshieldDatumBuilder¶

FeatureCollection.CreateWindshieldDatumBuilder¶

Creates a NXOpen.Features.VehicleDesign.WindshieldDatumBuilder

Signature CreateWindshieldDatumBuilder(windshieldDatum)

Parameters:	windshieldDatum (`NXOpen.Features.Feature`) – feature to be edited
Returns:
Return type:	`NXOpen.Features.FeatureBuilder`

New in version NX6.0.0.

Deprecated since version NX9.0.0: Use NXOpen.Features.VehicleDesignCollection.CreateWindshieldDatumBuilder instead.

License requirements: nx_general_packaging (“NX General Packaging”)

CreateWrapBuilder¶

FeatureCollection.CreateWrapBuilder¶

Creates a NXOpen.Features.WrapBuilder

Signature CreateWrapBuilder(wrap)

Parameters:	wrap (`NXOpen.Features.WrapUnwrap`) – `NXOpen.Features.WrapUnwrap` to be edited
Returns:	WrapBuilder object
Return type:	`NXOpen.Features.WrapBuilder`

New in version NX6.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

CreateWrapGeometryBuilder¶

FeatureCollection.CreateWrapGeometryBuilder¶

Creates a NXOpen.Features.WrapGeometryBuilder

Signature CreateWrapGeometryBuilder(wrapGeometry)

Parameters:	wrapGeometry (`NXOpen.Features.WrapGeometry`) – `NXOpen.Features.WrapGeometry` to be edited
Returns:
Return type:	`NXOpen.Features.WrapGeometryBuilder`

New in version NX6.0.0.

License requirements: features_modeling (“FEATURES MODELING”), solid_modeling (“SOLIDS MODELING”)

DeleteAllPartInformationalFeatureAlerts¶

FeatureCollection.DeleteAllPartInformationalFeatureAlerts¶

Delete all informational alerts from all the features in a given part

Signature DeleteAllPartInformationalFeatureAlerts()

New in version NX5.0.0.

License requirements: None.

DeleteInformationalAlerts¶

FeatureCollection.DeleteInformationalAlerts¶

Delete all informational alerts from the features and if numFrecs is 0 then delete informational alerts from all fetaures in the part

Signature DeleteInformationalAlerts(feature)

Parameters:	feature (list of `NXOpen.NXObject`) – Array of feature on which information alerts are to be deleted

New in version NX10.0.0.

License requirements: None.

DeleteWarningAlerts¶

FeatureCollection.DeleteWarningAlerts¶

Delete all warning alerts from the features and if numFrecs is 0 then delete warning alerts from all fetaures in the part

Signature DeleteWarningAlerts(feature)

Parameters:	feature (list of `NXOpen.NXObject`) – Array of feature on which warning alerts are to be deleted

New in version NX10.0.0.

License requirements: None.

FindObject¶

FeatureCollection.FindObject¶

Finds the NXOpen.Features with the given identifier as recorded in a journal.

An object may not return the same value as its JournalIdentifier in different versions of the software. However newer versions of the software should find the same object when FindObject is passed older versions of its journal identifier. In general, this method should not be used in handwritten code and exists to support record and playback of journals.

An exception will be thrown if no object can be found with the given journal identifier.

Signature FindObject(journalIdentifier)

Parameters:	journalIdentifier (str) – Identifier of the body you want
Returns:	Feature with this identifier
Return type:	`NXOpen.Features.Feature`

New in version NX3.0.0.

License requirements: None.

GetAllPartFeaturesWithAlerts¶

FeatureCollection.GetAllPartFeaturesWithAlerts¶

Returns a list of all features from a given part that have update alerts

Signature GetAllPartFeaturesWithAlerts()

Returns:
Return type:	list of `NXOpen.Features.Feature`

New in version NX5.0.0.

License requirements: None.

GetAssociatedFeature¶

FeatureCollection.GetAssociatedFeature¶

Get the feature associated with an object

Signature GetAssociatedFeature(object)

Parameters:	object (`NXOpen.NXObject`) – Object to find associated feature.
Returns:	Feature associated with object. Set to Null if no feature is associated to the object.
Return type:	`NXOpen.Features.Feature`

New in version NX3.0.0.

License requirements: None.

GetAssociatedFeaturesOfBody¶

FeatureCollection.GetAssociatedFeaturesOfBody¶

Returns all features that are associated with this body

Signature GetAssociatedFeaturesOfBody(body)

Parameters:	body (`NXOpen.Body`) – `NXOpen.Body` whose associated features you want
Returns:	The associated NXOpen.Features.Feature`s of the input :py:class:`NXOpen.Body
Return type:	list of `NXOpen.Features.Feature`

New in version NX8.5.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

GetAssociatedFeaturesOfEdge¶

FeatureCollection.GetAssociatedFeaturesOfEdge¶

Returns all features that are associated with the faces of this edge

Signature GetAssociatedFeaturesOfEdge(edge)

Parameters:	edge (`NXOpen.Edge`) – `NXOpen.Edge` whose associated features you want
Returns:	The associated NXOpen.Features.Feature`s of the input :py:class:`NXOpen.Edge
Return type:	list of `NXOpen.Features.Feature`

New in version NX8.5.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

GetAssociatedFeaturesOfFace¶

FeatureCollection.GetAssociatedFeaturesOfFace¶

Returns all features associated with this face

Signature GetAssociatedFeaturesOfFace(face)

Parameters:	face (`NXOpen.Face`) – `NXOpen.Face` whose associated features you want
Returns:	The associated NXOpen.Features.Feature`s of the input :py:class:`NXOpen.Face
Return type:	list of `NXOpen.Features.Feature`

New in version NX8.5.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

GetFeatures¶

FeatureCollection.GetFeatures¶

Returns all the features in the part

Signature GetFeatures()

Returns:	Features in the part
Return type:	list of `NXOpen.Features.Feature`

New in version NX3.0.0.

License requirements: None.

GetIsMasterCutVisibleInView¶

FeatureCollection.GetIsMasterCutVisibleInView¶

Returns if a NXOpen.Features.MasterCutBuilder is visbible in specified NXOpen.CutView .

Signature GetIsMasterCutVisibleInView(masterCut, view)

Parameters:	masterCut (`NXOpen.Features.Feature`) – `NXOpen.Features.MasterCutBuilder` to be tested view (`NXOpen.CutView`) – Cut view
Returns:	True if master cut is visible in view

False otherwise :rtype: bool

New in version NX5.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

GetParentFeatureOfBody¶

FeatureCollection.GetParentFeatureOfBody¶

Returns the feature that created this body.

Signature GetParentFeatureOfBody(body)

Parameters:	body (`NXOpen.Body`) – `NXOpen.Body` whose parent features you want
Returns:	The parent `NXOpen.Features.Feature` of the input `NXOpen.Body`
Return type:	`NXOpen.Features.Feature`

New in version NX8.5.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

GetParentFeatureOfFace¶

FeatureCollection.GetParentFeatureOfFace¶

Returns the feature that created this face

Signature GetParentFeatureOfFace(face)

Parameters:	face (`NXOpen.Face`) – `NXOpen.Face` whose parent feature you want
Returns:	The parent `NXOpen.Features.Feature` of the input `NXOpen.Face`
Return type:	`NXOpen.Features.Feature`

New in version NX8.5.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

GetParentFeaturesOfEdge¶

FeatureCollection.GetParentFeaturesOfEdge¶

Returns the features that created the faces of this edge.

Typically the parent features of the 2 faces of the edge will be returned

Signature GetParentFeaturesOfEdge(edge)

Parameters:	edge (`NXOpen.Edge`) – `NXOpen.Edge` whose parent features you want
Returns:	The parent NXOpen.Features.Feature`s of the input :py:class:`NXOpen.Edge
Return type:	list of `NXOpen.Features.Feature`

New in version NX8.5.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

GetPartFeaturesWithNewAlerts¶

FeatureCollection.GetPartFeaturesWithNewAlerts¶

Returns a list of features that generated update alerts during recent update

Signature GetPartFeaturesWithNewAlerts()

Returns:
Return type:	list of `NXOpen.Features.Feature`

New in version NX5.0.0.

License requirements: None.

ReorderFeature¶

FeatureCollection.ReorderFeature¶

Reorders the Feature with respect to the given feature

Signature ReorderFeature(features, target, beforeOrAfter)

Parameters:	features (list of `NXOpen.Features.Feature`) – `NXOpen.Features.Feature` to be reordered target (`NXOpen.Features.Feature`) – Target feature beforeOrAfter (`NXOpen.Features.FeatureCollectionReorderType`) – Reorder Before/After

New in version NX6.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”) OR geometric_tol (“GDT”)

ReorganizeFeature¶

FeatureCollection.ReorganizeFeature¶

Reorganizes the Feature with respect to the given feature across the part module

Signature ReorganizeFeature(features, target, beforeOrAfter)

Parameters:	features (list of `NXOpen.Features.Feature`) – `NXOpen.Features.Feature` to be reorganized target (`NXOpen.Features.Feature`) – Target feature beforeOrAfter (`NXOpen.Features.FeatureCollectionReorderType`) – Reorder Before/After

New in version NX10.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

ReplaceWithIndependentSketch¶

FeatureCollection.ReplaceWithIndependentSketch¶

Replace the given features with Independent Sketch

Signature ReplaceWithIndependentSketch(features)

Parameters:	features (list of `NXOpen.Features.Feature`) – Features to be replaced
Returns:
Return type:	`NXOpen.Features.SketchConversionReport`

New in version NX7.5.0.

License requirements: None.

SetCanResetMcf¶

FeatureCollection.SetCanResetMcf¶

Sets whether mcf is allowed

Signature SetCanResetMcf(canResetMcf)

Parameters:	canResetMcf (bool) –

New in version NX8.5.0.

License requirements: None.

SetEditWithRollbackFeature¶

FeatureCollection.SetEditWithRollbackFeature¶

Sets the feature being edited with rollback

Signature SetEditWithRollbackFeature(feature)

Parameters:	feature (`NXOpen.Features.Feature`) – `NXOpen.Features.Feature` to be edited

New in version NX8.0.0.

License requirements: None.

SuppressFeatures¶

FeatureCollection.SuppressFeatures¶

Suppress the given features

Signature SuppressFeatures(features)

Parameters:	features (list of `NXOpen.Features.Feature`) – Features to be suppressed

New in version NX3.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)

UnsuppressFeatures¶

FeatureCollection.UnsuppressFeatures¶

Unsuppress the given features

Signature UnsuppressFeatures(features)

Parameters:	features (list of `NXOpen.Features.Feature`) – Features to be unsuppressed
Returns:	Features which were not unsuppressed due to errors
Return type:	list of `NXOpen.Features.Feature`

New in version NX3.0.0.

License requirements: solid_modeling (“SOLIDS MODELING”)