Package | Description |
---|---|
nxopen |
Provides classes and interfaces for the NX Open Common API.
|
nxopen.bodydes |
Provides classes and interfaces for Body Design.
|
nxopen.cam |
Provides classes and interfaces for Manufacturing.
|
nxopen.die |
Provides classes and interfaces relating to Die Engineering and Die Design.
|
nxopen.features |
Provides classes and interfaces for features.
|
nxopen.features.sheetmetal |
Provides classes and interfaces for Sheet Metal Features.
|
nxopen.features.shipdesign |
Provides classes and interfaces for Ship Design.
|
nxopen.features.subdivision |
Provides classes and interfaces for Subdivision Body feature.
|
nxopen.features.vehicledesign |
Provides classes and interfaces for Vehicle Design.
|
nxopen.linedesigner |
Provides classes and interfaces for Line Designer.
|
nxopen.tooling |
Provides classes and interfaces for Tooling.
|
nxopen.weld |
Provides classes and interfaces for Weld.
|
Modifier and Type | Interface and Description |
---|---|
interface |
SketchIntersectionCurveBuilder
Represents a
SketchIntersectionCurve builder To obtain an instance of this class use SketchCollection.createIntersectionCurveBuilder(nxopen.SketchIntersectionCurve) . |
interface |
SketchIntersectionPointBuilder
Represents a
SketchIntersectionPoint builder To obtain an instance of this class use SketchCollection.createIntersectionPointBuilder(nxopen.SketchIntersectionPoint) . |
Modifier and Type | Interface and Description |
---|---|
interface |
OnestepUnformBuilder
Represents a
OnestepUnformBuilder . |
Modifier and Type | Interface and Description |
---|---|
interface |
SurfaceRegions
Represents a Surface Regions Builder
To create a new instance of this class, use CAMSetup.createSurfaceRegions(nxopen.features.Feature) Created in NX8.0.0 |
Modifier and Type | Interface and Description |
---|---|
interface |
AddendumSectionBuilder
Represents a
AddendumSectionBuilder which is used to create or edit an addendum section. |
interface |
AddSurfBuilder
Represents a
AddSurfBuilder builder
To create a new instance of this class, use DieCollection.createAddSurfBuilder(nxopen.features.Feature) Created in NX6.0.0 |
interface |
CastReliefBuilder
Represents a
CastReliefBuilder builder
To create a new instance of this class, use DieCollection.castRelief(nxopen.die.CastRelief) Default values. |
interface |
CastReliefParentBuilder
Represents a Die Cast Relief sub feature.
|
interface |
ClampingSlotBuilder
Represents a Clamping Slot feature builder
To create a new instance of this class, use DieCollection.clampingSlot(nxopen.die.ClampingSlot) Default values. |
interface |
ClearanceBuilder
Represents a builder that is used to create or edit a
Clearance feature. |
interface |
CompensateRoughDataBuilder
Represents a
CompensateRoughDataBuilder . |
interface |
ConnectProfileParentBuilder
Represents a Die Connecting Profile sub feature.
|
interface |
DeckParentBuilder
Represents a Die Deck Feature sub feature.
|
interface |
DieShoeBuilder
Represents a Die Shoe feature builder.
|
interface |
DrawBeadBuilder
Represents a builder that is used to create or edit a
DrawBead feature. |
interface |
DrawDiePunchBuilder
Represents a Draw Die Punch feature builder.
|
interface |
DrawDiePunchSectionBuilder
Represents a Draw Die Punch Section sub feature.
|
interface |
FaceSheetBuilder
Represents a Face Sheet feature
This is an abstract class, and cannot be created. |
interface |
FillAreaBuilder
Represents a builder that is used to create or edit a
FillArea feature. |
interface |
FillBuilder
Represents an Area Fill feature
To create a new instance of this class, use DieCollection.fill(nxopen.features.Feature) Created in NX4.0.0 |
interface |
FingerClearanceNotchBuilder
Represents a builder that is used to create or edit a
FingerClearanceNotch feature. |
interface |
FlangeSteelRibChildBuilder
Represents a Die Flange Steel Rib Child sub feature.
|
interface |
FlangeSteelRibParentBuilder
Represents a Die Flange Steel Rib Parent sub feature.
|
interface |
FlangeTaskBuilder
Represents a Flange Task feature builder.
|
interface |
FormTaskBuilder
Represents a Form Task feature builder.
|
interface |
HandlingCoreBuilder
Represents a builder that is used to create or edit a
HandlingCore feature. |
interface |
HandlingCoreChildBuilder
Represents a Die Handling Core Child sub feature.
|
interface |
HandlingCoreParentBuilder
Represents a Die Handling Core Parent sub feature.
|
interface |
HeelpostBuilder
Represents a
HeelpostBuilder builder
To create a new instance of this class, use DieCollection.heelpost(nxopen.die.Heelpost) Default values. |
interface |
HoleChildBuilder
Represents a Die Hole Child sub feature.
|
interface |
HoleParentBuilder
Represents a Die Hole Parent sub feature.
|
interface |
KeywayBuilder
Represents a
KeywayBuilder builder
To create a new instance of this class, use DieCollection.keyway(nxopen.die.Keyway) Default values. |
interface |
KeywayChildBuilder
Represents a Die Keyway Child sub feature.
|
interface |
KeywayParentBuilder
Represents a Die Keyway Parent sub feature.
|
interface |
LineupBuilder
Represents a Lineup feature builder
To create a new instance of this class, use DieCollection.lineup(nxopen.features.Feature) Created in NX4.0.0 |
interface |
MachineReliefBuilder
Represents a builder that is used to create or edit a
MachineRelief feature. |
interface |
OutputCurvesBuilder
Represents an output curves feature builder.
|
interface |
PadChildBuilder
Represents a Die Pad Child sub feature.
|
interface |
PadParentBuilder
Represents a Die Pad Parent sub feature.
|
interface |
PierceHoleChildBuilder
Represents a Pierce Hole Child sub feature.
|
interface |
PierceHoleParentBuilder
Represents a Pierce Hole Parent sub feature.
|
interface |
PierceTaskBuilder
Represents a Pierce Task feature builder
To create a new instance of this class, use DieCollection.pierceTask(nxopen.features.Feature) Created in NX4.0.0 |
interface |
PointChildBuilder
Represents a Die Point Child sub feature.
|
interface |
PointParentBuilder
Represents a Die Point Parent sub feature.
|
interface |
PressureSystemChildBuilder
Represents a Die Pressure System Child sub feature.
|
interface |
PressureSystemParentBuilder
Represents a Die Pressure System Parent sub feature.
|
interface |
QuickBinderBuilder
Represents a
QuickBinderBuilder builder which builds a developable binder sheet
body by adding cones, cylinders, or planes to an approximated face. |
interface |
QuickBinderWrapBuilder
Represents a
QuickBinderWrapBuilder builder
This is an abstract class, and cannot be created. |
interface |
RibChildBuilder
Represents a Die Rib Child sub feature.
|
interface |
RibParentBuilder
Represents a Die Rib Parent sub feature.
|
interface |
RotorBuilder
Represents a CAM Rotor feature builder.
|
interface |
RotorSectionBuilder
Represents a Rotor Section sub feature.
|
interface |
SpringbackCompensationBuilder
Used to create or edit a
SpringbackCompensation feature. |
interface |
SteelInsertBuilder
Represents a Steel Insert feature builder.
|
interface |
SteelInsertSectionBuilder
Represents a Steel Insert Section sub feature.
|
interface |
SteelInsertSegmentChildBuilder
Represents a Steel Insert Segment Child sub feature.
|
interface |
SteelInsertSegmentParentBuilder
Represents a Steel Insert Segment Parent sub feature.
|
interface |
ThroatChildBuilder
Represents a Die Throat Child sub feature.
|
interface |
ThroatParentBuilder
Represents a Die Throat Parent sub feature.
|
interface |
TrimFlangeDieAssistantBuilder
Represents a
TrimFlangeDieAssistantBuilder
To create a new instance of this class, use DieCollection.trimFlangeDieAssistant(nxopen.features.Feature) Created in NX5.0.0 |
interface |
TrimLineDevelopmentBuilder
Represents a
TrimLineDevelopment builder
To create a new instance of this class, use DieCollection.createTrimLineDevelopmentBuilder(nxopen.features.Feature) Created in NX6.0.0 |
interface |
TrimTaskBuilder
Represents a Trim Task feature builder.
|
interface |
WearPlateLocChildBuilder
Represents a Die Wear Plate Locator sub feature.
|
interface |
WearPlateLocParentBuilder
Represents a Die Wear Plate Locator sub feature.
|
Modifier and Type | Interface and Description |
---|---|
interface |
AdaptiveShellBuilder
Represents a
AdaptiveShell builder To create a new instance of this class, use FeatureCollection.createAdaptiveShellBuilder(nxopen.features.AdaptiveShell) Default values. |
interface |
AdmMoveFaceBuilder
Represents a
AdmMoveFace builder
To create a new instance of this class, use FeatureCollection.createAdmMoveFaceBuilder(nxopen.features.AdmMoveFace) Default values. |
interface |
AdmOffsetRegionBuilder
Represents a
AdmOffsetRegion builder
To create a new instance of this class, use FeatureCollection.createAdmOffsetRegionBuilder(nxopen.features.AdmOffsetRegion) Default values. |
interface |
AdmResizeFaceBuilder
Represents a builder for a resize face feature.
|
interface |
AeroFlangeBuilder
Represents a
AeroFlange builder
To create a new instance of this class, use AeroCollection.createAeroFlangeBuilder(nxopen.features.AeroFlange) Default values. |
interface |
AeroRibBuilder
Represents a
AeroRib builder
To create a new instance of this class, use AeroCollection.createAeroRibBuilder(nxopen.features.AeroRib) Default values. |
interface |
AestheticFaceBlendBuilder
This class will provide ability to create aesthetically pleasing blend surfaces on sheet and solid bodies.
|
interface |
AnalyzePocketBuilder
Represents a
AnalyzePocket builder for Analyze Pocket feature. |
interface |
AngularDimBuilder
Represents a
AngularDim builder
To create a new instance of this class, use FeatureCollection.createAngularDimensionBuilder(nxopen.features.AngularDim) Created in NX6.0.0 |
interface |
AOCSBuilder
Represents a Offset In Face(aka Associative offset curve on face)feature builder.
|
interface |
AssemblyCutBuilder
Represents a
AssemblyCut builder. |
interface |
AssociativeArcBuilder
Represents a
AssociativeArc builder To create a new instance of this class, use BaseFeatureCollection.createAssociativeArcBuilder(nxopen.features.AssociativeArc) Default values. |
interface |
AssociativeLineBuilder
Represents a
AssociativeLine builder
To create a new instance of this class, use BaseFeatureCollection.createAssociativeLineBuilder(nxopen.features.AssociativeLine) Default values. |
interface |
BlendCornerBuilder
Represents a
BlendCorner builder. |
interface |
BlendPocketBuilder
Represents a
BlendPocket builder for Blend Pocket feature. |
interface |
BlockFeatureBuilder
Represents a block feature builder.
|
interface |
BodyByEquationBuilder
Represents a
BodyByEquation builder. |
interface |
BooleanBuilder
Represents a boolean feature builder.
|
interface |
BoundedPlaneBuilder
Represents a
BoundedPlane builder
To create a new instance of this class, use FeatureCollection.createBoundedPlaneBuilder(nxopen.features.BoundedPlane) Created in NX6.0.0 |
interface |
BridgeCurveBuilder
Deprecated.
Deprecated in NX8.5.0. Use
BridgeCurveBuilderEx instead.
|
interface |
BridgeCurveBuilderEx
Represents a
BridgeCurve builder. |
interface |
BridgeSurfaceBuilder
Represents a
BridgeSurface builder
To create a new instance of this class, use FeatureCollection.createBridgeSurfaceBuilder(nxopen.features.BridgeSurface) Default values. |
interface |
ChamferBuilder
Represents the chamfer builder data.
|
interface |
ChangeShellThicknessBuilder
Represents a
ChangeShellThickness builder To create a new instance of this class, use FeatureCollection.createChangeShellThicknessBuilder(nxopen.features.ChangeShellThickness) Default values. |
interface |
CircularBlendCurveBuilder
Represents a
CircularBlendCurve builder
To create a new instance of this class, use FeatureCollection.createCircularBlendCurveBuilder(nxopen.features.CircularBlendCurve) Default values. |
interface |
CoaxialBuilder
Represents a
Coaxial builder
To create a new instance of this class, use FeatureCollection.createCoaxialBuilder(nxopen.features.Coaxial) Default values. |
interface |
ColorFaceBuilder
Represents a
ColorFaceBuilder
To create a new instance of this class, use FeatureCollection.createColorFaceBuilder() Created in NX7.0.0 |
interface |
CombinedProjectionBuilder
Represents a
CombinedProjection builder
To create a new instance of this class, use FeatureCollection.createCombinedProjectionBuilder(nxopen.features.CombinedProjection) Default values. |
interface |
CombineSheetsBuilder
Represents a combine sheets builder.
|
interface |
CompositeCurveBuilder
Represents a
CompositeCurve builder. |
interface |
ConcaveFacesBuilder
Represents a Concave Faces builder.
|
interface |
ConeBuilder
Represents a builder for a cone feature.
|
interface |
CoplanarBuilder
Represents a
Coplanar builder
To create a new instance of this class, use FeatureCollection.createCoplanarBuilder(nxopen.features.Feature) Default values. |
interface |
CopyFaceBuilder
Represents a builder for a copy face feature.
|
interface |
CurveLengthBuilder
Represents the CurveLength builder
To create a new instance of this class, use FeatureCollection.createCurvelengthBuilder(nxopen.features.Feature) Default values. |
interface |
CurveOnSurfaceBuilder
Curve On Surface builder class.
|
interface |
CustomFeatureBuilder
Represents a
CustomFeature builder
To create a new instance of this class, use FeatureCollection.createCustomFeatureBuilder(nxopen.features.Feature) Created in NX11.0.0 |
interface |
CutFaceBuilder
Represents a builder for a cut face feature.
|
interface |
CylinderBuilder
Represents a
Cylinder builder
To create a new instance of this class, use FeatureCollection.createCylinderBuilder(nxopen.features.Feature) Default values. |
interface |
DatumAxisBuilder
Represents a datum axis feature builder.
|
interface |
DatumBuilder
Represents a builder for datum features.
|
interface |
DatumCsysBuilder
Represents a datum csys builder
To create a new instance of this class, use FeatureCollection.createDatumCsysBuilder(nxopen.features.Feature) Created in NX4.0.0 |
interface |
DatumPlaneBuilder
Represents a datum plane feature builder.
|
interface |
DeformDefinitionBuilder
Used as a place holder for selected member features, expressions and external references for a deform
definition feature record that is to be created.
|
interface |
DeleteBodyBuilder
Represents a
DeleteBody builder for Delete Body feature. |
interface |
DeleteCurveBuilder
Represents a
DeleteCurve builder
To create a new instance of this class, use SynchronousCurveCollection.createDeleteCurveBuilder(nxopen.features.DeleteCurve) Default values. |
interface |
DeleteEdgeBuilder
Represents a builder for a delete edge feature.
|
interface |
DeleteFaceBuilder
Represents a builder for a delete face feature, don't use it until nx502.
|
interface |
DimensionBuilder
Represents a
DimensionBuilder The sub-class should create an instance of corresponding object Default values. |
interface |
DivideCurveBuilder
Represents a builder for non-associative divide curve operation.
|
interface |
DividefaceBuilder
Represents a divide face builder.
|
interface |
DraftBodyBuilder
Represents a
DraftBody builder
To create a new instance of this class, use FeatureCollection.createDraftBodyBuilder(nxopen.features.Feature) Default values. |
interface |
DraftBuilder
Represents a Draft Feature Builder that creates or edits a draft (Old name Taper) feature.
|
interface |
DraftingSplineBuilder
Sketch Spline builder class.
|
interface |
EdgeBlendBuilder
Represents a Edge Blend builder.
|
interface |
EdgeSymmetryBuilder
Represents a
EdgeSymmetry builder
To create a new instance of this class, use FeatureCollection.createEdgeSymmetryBuilder(nxopen.features.Feature) Default values. |
interface |
EditCrossSectionBuilder
Represents a
EditCrossSection builder
To create a new instance of this class, use FeatureCollection.createEditCrossSectionBuilder(nxopen.features.EditCrossSection) Default values. |
interface |
EmbedManagerBuilder
Used to manage the interaction to Embed, Replace, Rename and Delete embedded
file information in the part file.
|
interface |
EmbossBodyBuilder
Represents a
EmbossBody builder
To create a new instance of this class, use FeatureCollection.createEmbossBodyBuilder(nxopen.features.EmbossBody) Default values. |
interface |
EmbossBuilder
Represents an emboss feature builder that creates or edits an emboss feature.
|
interface |
EnlargeBuilder
Represents a
Enlarge builder. |
interface |
ExtendSheetBuilder
Represents a
ExtendSheet builder
To create a new instance of this class, use TrimFeatureCollection.createExtendSheetBuilder(nxopen.features.ExtendSheet) Default values. |
interface |
ExtensionBuilder
Represents a
Extension builder
To create a new instance of this class, use FeatureCollection.createExtensionBuilder(nxopen.features.Extension) Default values. |
interface |
ExtractFaceBuilder
Represents a
ExtractFace builder. |
interface |
ExtrudeBuilder
Represents a extrude feature builder.
|
interface |
FaceBlendBuilder
Represents a face blend builder.
|
interface |
FillHoleBuilder
Represents a
FillHole builder
To create a new instance of this class, use FreeformSurfaceCollection.createFillHoleBuilder(nxopen.features.FillHole) Default values. |
interface |
FitCurveBuilder
Represents a
FitCurve builder
To create a new instance of this class, use FeatureCollection.createFitCurveBuilder(nxopen.features.FitCurve) Default values. |
interface |
FitSurfaceBuilder
This class will provide the ability to fit surfaces through facet bodies or point sets/groups.
|
interface |
FixedBuilder
Represents a builder for a fixed feature.
|
interface |
FlatteningAndFormingBuilder
This class will provide the solution to unwrap 3D non-planar, curved geometry to a 2D plane.
|
interface |
FlatteningAndFormingBuilderEx
This class will provide the solution to unwrap 3D non-planar, curved geometry to a 2D plane.
|
interface |
FlowBlendBuilder
Represents a
FlowBlend builder
To create a new instance of this class, use FeatureCollection.createFlowBlendBuilder(nxopen.features.FlowBlend) Default values. |
interface |
FreeTransformerBuilder
Represents a
FreeTransformer builder
To create a new instance of this class, use FeatureCollection.createFreeTransformerBuilder(nxopen.features.Feature) Default values. |
interface |
GeneralConicBuilder
Represents a
GeneralConic builder
To create a new instance of this class, use FeatureCollection.createGeneralConicBuilder(nxopen.features.GeneralConic) Default values. |
interface |
GeodesicChamferBuilder
Represents a
GeodesicChamfer builder for GeodesicChamfer command. |
interface |
GeodesicFilletBuilder
Represents a
GeodesicFillet builder for GeodesicFillet command. |
interface |
GeodesicIntersectBuilder
Represents a
GeodesicIntersect builder for Intersect command. |
interface |
GeodesicLineBuilder
Represents a
GeodesicLine builder for GeodesicLine command. |
interface |
GeodesicOffsetBuilder
Represents a
GeodesicOffset builder for Offset command. |
interface |
GeodesicPointBuilder
Represents a
GeodesicPoint builder for GeodesicPoint command. |
interface |
GeodesicProjectBuilder
Represents a
GeodesicProject builder for Project command. |
interface |
GeodesicResetBuilder
Represents a
GeodesicResetBuilder To create a new instance of this class, use GeodesicSketchCollection.createGeodesicResetBuilder() Created in NX10.0.0 |
interface |
GeodesicSketchBuilder
Represents a
GeodesicSketch builder for GeodesicSketch feature. |
interface |
GeodesicTrimBuilder
Represents a
GeodesicSketch builder for GeodesicTrim command. |
interface |
GeomcopyBuilder
Represents a
Geomcopy builder
To create a new instance of this class, use FeatureCollection.createGeomcopyBuilder(nxopen.features.Feature) Default values. |
interface |
GlobalShapingBuilder
Represents a
GlobalShaping builder
To create a new instance of this class, use FeatureCollection.createGlobalShapingBuilder(nxopen.features.GlobalShaping) Default values. |
interface |
GlobalShapingCurveOffsetBuilder
The class used to define the curves and offset laws needed for the target curve list.
|
interface |
GroupFaceBuilder
Represents a builder for a group face feature.
|
interface |
HelixBuilder
Represents a
Helix builder
To create a new instance of this class, use FeatureCollection.createHelixBuilder(nxopen.features.Helix) Default values. |
interface |
HolePackageBuilder
Represents a
HolePackage builder. |
interface |
HumanBuilder
Represents a human feature.
|
interface |
IFormBuilder
Represents a
IForm builder. |
interface |
InstanceFeatureBuilder
instance feature builder
To create a new instance of this class, use FeatureCollection.createInstanceFeatureBuilder(nxopen.features.InstanceFeature) Default values. |
interface |
IntersectionCurveBuilder
Represents a
IntersectionCurveBuilder builder. |
interface |
IsoclineCurveBuilder
Represents a
IsoclineCurve builder
To create a new instance of this class, use FreeformCurveCollection.createIsoclineCurveBuilder(nxopen.features.IsoclineCurve) Default values. |
interface |
IsolateFeatureBuilder
Represents a
IsolateFeature builder To create a new instance of this class, use FeatureCollection.createIsolateFeatureBuilder(nxopen.features.IsolateFeature) Created in NX8.5.0 |
interface |
IsoparametricCurvesBuilder
Represents a
IsoparametricCurves builder
To create a new instance of this class, use FeatureCollection.createIsoparametricCurvesBuilder(nxopen.features.IsoparametricCurves) Default values. |
interface |
JoinCurvesBuilder
Represents a
JoinCurves builder. |
interface |
LabelChamferBuilder
Represents a
LabelChamfer builder
To create a new instance of this class, use FeatureCollection.createLabelChamferBuilder(nxopen.features.LabelChamfer) Created in NX7.0.0 |
interface |
LabelNotchBlendBuilder
Represents a
LabelNotchBlend builder
To create a new instance of this class, use FeatureCollection.createLabelNotchBlendBuilder(nxopen.features.LabelNotchBlend) Created in NX8.0.0 |
interface |
LatticeBuilder
Represents a Features.Lattice builder
To create a new instance of this class, use LatticeFeatureCollection.createLatticeBuilder(nxopen.features.Lattice) Default values. |
interface |
LawCurveBuilder
Represents a
LawCurve builder
To create a new instance of this class, use FeatureCollection.createLawCurveBuilder(nxopen.features.LawCurve) Default values. |
interface |
LawExtensionBuilder
Represents a
LawExtension builder
To create a new instance of this class, use FeatureCollection.createLawExtensionBuilder(nxopen.features.LawExtension) Default values. |
interface |
LawExtensionBuilderEx
Represents a
LawExtensionEx builder
To create a new instance of this class, use FeatureCollection.createLawExtensionBuilderEx(nxopen.features.Feature) Default values. |
interface |
LinearDimensionBuilder
Represents a
LinearDimension builder
To create a new instance of this class, use FeatureCollection.createLinearDimensionBuilder(nxopen.features.LinearDimension) Default values. |
interface |
LinkedFacetBuilder
Represents a
LinkedFacet builder
To create a new instance of this class, use FeatureCollection.createLinkedFacetBuilder(nxopen.features.LinkedFacet) Created in NX6.0.0 |
interface |
LocalScaleCurveBuilder
Represents a
LocalScaleCurve builder
To create a new instance of this class, use SynchronousCurveCollection.createLocalScaleCurveBuilder(nxopen.features.LocalScaleCurve) Default values. |
interface |
MakeOffsetBuilder
Represents a
MakeOffset builder
To create a new instance of this class, use FeatureCollection.createMakeOffsetBuilder(nxopen.features.MakeOffset) Default values. |
interface |
MakeSolidBuilder
Represents a
MakeSolid builder. |
interface |
MapleBuilder
Deprecated.
Deprecated in NX12.0.0. Use
MathIntegrationBuilder instead.
|
interface |
MasterCutBuilder
Represents a master cut feature builder that creates, inquires, or edits a master cut feature associated with a Cut View.
|
interface |
MatchEdgeBuilder
Represents a
MatchEdge builder
To create a new instance of this class, use FeatureCollection.createMatchEdgeBuilder(nxopen.features.MatchEdge) Default values. |
interface |
MathIntegrationBuilder
Represents a
MathIntegration builder
To create a new instance of this class, use FeatureCollection.createMathIntegrationBuilder(nxopen.features.MathIntegration) Default values. |
interface |
MeshSurfaceBuilder
Mesh Surface Builder class.
|
interface |
MidSurfaceByFacePairsBuilder
Represents a
MidSurfaceByFacePairs builder
To create a new instance of this class, use FeatureCollection.createMidSurfaceByFacePairsBuilder(nxopen.features.Feature) Default values. |
interface |
MidSurfaceUserDefinedBuilder
Represents a
MidSurfaceUserDefined builder
To create a new instance of this class, use FeatureCollection.createMidSurfaceUserDefinedBuilder(nxopen.features.MidSurfaceUserDefined) Default values. |
interface |
MirrorBodyBuilder
Represents a
MirrorBody builder. |
interface |
MirrorBuilder
Represents a
Mirror builder. |
interface |
MirrorCurveBuilder
Represents a
MirrorCurve builder
To create a new instance of this class, use FeatureCollection.createMirrorCurveBuilder(nxopen.features.Feature) Default values. |
interface |
MirrorFaceBuilder
Represents a
MirrorFace builder
To create a new instance of this class, use FeatureCollection.createMirrorFaceBuilder(nxopen.features.Feature) Default values. |
interface |
MirrorFeatureBuilder
Represents a
MirrorFeature builder
To create a new instance of this class, use FeatureCollection.createMirrorFeatureBuilder(nxopen.features.Feature) Created in NX5.0.0 |
interface |
MoveCurveBuilder
Represents a
MoveCurve builder
To create a new instance of this class, use SynchronousCurveCollection.createMoveCurveBuilder(nxopen.features.MoveCurve) Default values. |
interface |
MoveEdgeBuilder
Represents a
MoveEdge builder
To create a new instance of this class, use SynchronousEdgeCollection.createMoveEdgeBuilder(nxopen.features.MoveEdge) Default values. |
interface |
MoveFaceBuilder
Represents a builder for a move face feature, don't use it until nx502.
|
interface |
NSidedSurfaceBuilder
Represents a
NSidedSurface builder
To create a new instance of this class, use FeatureCollection.createNSidedSurfaceBuilder(nxopen.features.NSidedSurface) Default values. |
interface |
Offset3DCurveBuilder
Represents a
Offset3DCurveBuilder builder which implements
offset curves along a direction with offset distance in three dimension. |
interface |
OffsetCurveBuilder
Represents a
OffsetCurve builder To create a new instance of this class, use FeatureCollection.createOffsetCurveBuilder(nxopen.features.Feature) Default values. |
interface |
OffsetEdgeBuilder
Represents a
OffsetEdge builder
To create a new instance of this class, use SynchronousEdgeCollection.createOffsetEdgeBuilder(nxopen.features.OffsetEdge) Created in NX9.0.0 |
interface |
OffsetEmbossBuilder
Represents a builder for an offset emboss feature.
|
interface |
OffsetFaceBuilder
Represents a
OffsetFace builder
To create a new instance of this class, use FeatureCollection.createOffsetFaceBuilder(nxopen.features.Feature) Default values. |
interface |
OffsetFacetBodyBuilder
Represents a
OffsetFacetBody . |
interface |
OffsetMoveCurveBuilder
Represents a
OffsetMoveCurve builder
To create a new instance of this class, use SynchronousCurveCollection.createOffsetMoveCurveBuilder(nxopen.features.OffsetMoveCurve) Default values. |
interface |
OffsetRegionBuilder
Represents a builder for an offset region feature, don't use it until nx502.
|
interface |
OffsetSurfaceBuilder
This class represents a offset surface builder, used for creating or editing an
offset surface feature.
|
interface |
OvercrownBuilder
Represents a Overcrown Builder
To create an instance of this this class use FeatureCollection.createOvercrownFeatureBuilder(nxopen.features.Feature) Created in NX4.0.0 |
interface |
ParallelBuilder
Represents a
Parallel builder. |
interface |
PartModuleBuilder
Represents a
PartModule builder To create a new instance of this class, use FeatureCollection.createPartModuleBuilder(nxopen.features.PartModule) Created in NX8.0.0 |
interface |
PasteFaceBuilder
Represents a builder for a paste face feature.
|
interface |
PatchBuilder
Represents a
PatchBuilder
Lets you use a sheet body to replace some of the faces of a solid body. |
interface |
PatchOpeningsBuilder
Represents a builder for a Patch Openings feature.
|
interface |
PatternFaceBuilder
Represents a builder for a pattern face feature, don't use it until nx502.
|
interface |
PatternFaceFeatureBuilder
Represents a builder for a pattern face feature, post NX9.
|
interface |
PatternFeatureBuilder
Represents a
PatternFeature builder
To create a new instance of this class, use FeatureCollection.createPatternFeatureBuilder(nxopen.features.Feature) Default values. |
interface |
PatternGeometryBuilder
This class represents the builder to be used to create Pattern Geometry features.
|
interface |
PerpendicularBuilder
Represents a
Perpendicular builder
To create a new instance of this class, use FeatureCollection.createPerpendicularBuilder(nxopen.features.Perpendicular) Default values. |
interface |
PointFeatureBuilder
Represents a
PointFeatureBuilder builder
To create a new instance of this class, use BaseFeatureCollection.createPointFeatureBuilder(nxopen.features.Feature) Created in NX5.0.0 |
interface |
PointSetBuilder
Represents a
PointSetBuilder . |
interface |
PoleSmoothingBuilder
Represents a
PoleSmoothing builder
To create a new instance of this class, use FeatureCollection.createPoleSmoothingBuilder(nxopen.features.PoleSmoothing) Default values. |
interface |
PolylineBuilder
Polyline builder class.
|
interface |
ProjectCurveBuilder
Represents a
ProjectCurve builder. |
interface |
PromotionBuilder
Represents a
Promotion builder. |
interface |
PullFaceBuilder
Represents a
PullFace builder
To create a new instance of this class, use FeatureCollection.createPullFaceBuilder(nxopen.features.PullFace) Default values. |
interface |
RadialDimensionBuilder
Represents a
RadialDimension builder
To create a new instance of this class, use FeatureCollection.createRadialDimensionBuilder(nxopen.features.RadialDimension) Created in NX6.0.0 |
interface |
RapidSurfaceBuilder
Represents a
RapidSurface builder
To create a new instance of this class, use FeatureCollection.createRapidSurfaceBuilder(nxopen.features.RapidSurface) Default values. |
interface |
RefitFaceBuilder
Represents a
RefitFace builder
To create a new instance of this class, use FeatureCollection.createRefitFaceBuilder(nxopen.features.RefitFace) Default values. |
interface |
ReorderBlendsBuilder
Represents a
ReorderBlends builder
To create a new instance of this class, use FeatureCollection.createReorderBlendsBuilder(nxopen.features.ReorderBlends) Created in NX7.5.1 |
interface |
ReplaceBlendBuilder
Represents a builder for a Replace Blend feature.
|
interface |
ReplaceFaceBuilder
Represents a builder for a replace face feature, don't use it until nx502.
|
interface |
ResizeBlendBuilder
Represents a builder for a resize blend feature, don't use it until nx502.
|
interface |
ResizeChamferBuilder
Represents a
ResizeChamfer builder
To create a new instance of this class, use FeatureCollection.createResizeChamferBuilder(nxopen.features.ResizeChamfer) Default values. |
interface |
ResizeChamferCurveBuilder
Represents a
ResizeChamferCurve builder
To create a new instance of this class, use SynchronousCurveCollection.createResizeChamferCurveBuilder(nxopen.features.ResizeChamferCurve) Created in NX10.0.0 |
interface |
ResizeCurveBuilder
Represents a
ResizeCurve builder
To create a new instance of this class, use SynchronousCurveCollection.createResizeCurveBuilder(nxopen.features.ResizeCurve) Default values. |
interface |
ResizeFaceBuilder
Represents a builder for a resize face feature, don't use it until nx502.
|
interface |
ResizePlaneBuilder
Represents a
ResizePlane builder
To create a new instance of this class, use FeatureCollection.createResizePlaneBuilder(nxopen.features.Feature) Created in NX6.0.3 |
interface |
RevolveBuilder
Represents a revolve builder.
|
interface |
RibbonBuilder
Represents a
Ribbon builder
To create a new instance of this class, use FeatureCollection.createRibbonBuilder(nxopen.features.Feature) Default values. |
interface |
RibBuilder
Represents a
Rib builder
To create a new instance of this class, use DesignFeatureCollection.createRibBuilder(nxopen.features.Rib) Default values. |
interface |
RPOBuilder
Represents a RPO builder.
|
interface |
RuledBuilder
Represents a
Ruled builder
To create a new instance of this class, use FeatureCollection.createRuledBuilder(nxopen.features.Feature) Default values. |
interface |
ScaleBuilder
Represents a
Scale builder. |
interface |
ScaleCurveBuilder
Represents a
ScaleCurveBuilder builder
To create a new instance of this class, use CurveFeatureCollection.createScaleCurveBuilder(nxopen.features.ScaleCurve) Default values. |
interface |
SectionCurveBuilder
Represents a
SectionCurve builder. |
interface |
SectionEditBuilder
Represents a
SectionEdit builder
To create a new instance of this class, use FeatureCollection.createSectionEditBuilder(nxopen.features.SectionEdit) Created in NX6.0.0 |
interface |
SectionInertiaAnalysisBuilder
Represents a
SectionInertiaAnalysis builder
To create a new instance of this class, use FeatureCollection.createSectionInertiaAnalysisBuilder(nxopen.features.SectionInertiaAnalysis) Default values. |
interface |
SectionSurfaceBuilder
Deprecated.
Deprecated in NX9.0.0. Use
SectionSurfaceBuilderEx instead.
|
interface |
SectionSurfaceBuilderEx
Represents a
SectionSurface builder. |
interface |
ServiceOrientedBodyFeatureBuilder
Represents a
ServiceOrientedBodyFeature builder
Not support KF. |
interface |
ServiceOrientedFeatureCurveBuilder
Represents a
ServiceOrientedFeatureCurve builder
Not support KF. |
interface |
SewBuilder
Represents a
Sew builder. |
interface |
ShelfBuilder
Represents a
Shelf builder
To create a new instance of this class, use AeroCollection.createShelfBuilder(nxopen.features.Shelf) Default values. |
interface |
ShellBuilder
Represents the Shell feature builder.
|
interface |
ShellFaceBuilder
Represents a
ShellFace builder To create a new instance of this class, use FeatureCollection.createShellFaceBuilder(nxopen.features.ShellFace) Default values. |
interface |
SilhouetteFlangeBuilder
Represents a
SilhouetteFlange builder
To create a new instance of this class, use FeatureCollection.createSilhouetteFlangeBuilder(nxopen.features.SilhouetteFlange) Default values. |
interface |
SketchFitCurveBuilder
Sketch Fit Curve builder class.
|
interface |
SketchSplineBuilder
Sketch Spline builder class.
|
interface |
SmoothCurveStringBuilder
Represents a
SmoothCurveString builder
To create a new instance of this class, use FreeformCurveCollection.createSmoothCurveStringBuilder(nxopen.features.SmoothCurveString) Default values. |
interface |
SmoothSplineBuilder
Represents a
SmoothSpline builder
To create a new instance of this class, use FeatureCollection.createSmoothSplineBuilder(nxopen.features.SmoothSpline) Default values. |
interface |
SnipSurfaceBuilder
Represents a
SnipSurface builder
To create a new instance of this class, use FeatureCollection.createSnipSurfaceBuilder(nxopen.features.SnipSurface) Default values. |
interface |
SphereBuilder
Represents a
Sphere builder. |
interface |
SphericalCornerBuilder
Represents a
SphericalCorner builder
To create a new instance of this class, use FeatureCollection.createSphericalCornerBuilder(nxopen.features.SphericalCorner) Default values. |
interface |
SpineCurveBuilder
Represents a
SpineCurve builder
To create a new instance of this class, use FreeformCurveCollection.createSpineCurveBuilder(nxopen.features.SpineCurve) Default values. |
interface |
SplitBodyBuilder
Represents a
SplitBody builder. |
interface |
StepBuilder
Represents a
Step builder
To create a new instance of this class, use AeroCollection.createStepBuilder(nxopen.features.Step) Default values. |
interface |
StudioSplineBuilder
Deprecated.
Deprecated in NX8.0.0. Use
StudioSplineBuilderEx instead.
|
interface |
StudioSplineBuilderEx
Studio Spline builder class.
|
interface |
StudioSurfaceBuilder
Represents a
StudioSurface builder
To create a new instance of this class, use FeatureCollection.createStudioSurfaceBuilder(nxopen.features.Feature) Default values. |
interface |
StudioSurfaceBuilderEx
Represents a
StudioSurfaceEx builder
To create a new instance of this class, use FreeformSurfaceCollection.createStudioSurfaceBuilderEx(nxopen.features.Feature) Default values. |
interface |
StudioXformBuilder
Deprecated.
Deprecated in NX8.5.0. Use
StudioXformBuilderEx instead.
|
interface |
StudioXformBuilderEx
Represents a
StudioXform builder To create a new instance of this class, use FeatureCollection.createStudioXformBuilderEx(nxopen.features.StudioXform) Default values. |
interface |
StyledBlendBuilder
Represents a
StyledBlend builder
To create a new instance of this class, use FeatureCollection.createStyledBlendBuilder(nxopen.features.StyledBlend) Default values. |
interface |
StyledCornerBuilder
Represents a
StyledCorner builder
To create a new instance of this class, use FeatureCollection.createStyledCornerBuilder(nxopen.features.StyledCorner) Default values. |
interface |
StyledSweepBuilder
Represents a
StyledSweep builder
To create a new instance of this class, use FeatureCollection.createStyledSweepBuilder(nxopen.features.Feature) Default values. |
interface |
SweepAlongGuideBuilder
Represents a
SweepAlongGuide builder
To create a new instance of this class, use FeatureCollection.createSweepAlongGuideBuilder(nxopen.features.SweepAlongGuide) Default values. |
interface |
SweptBuilder
Represents a
Swept builder
To create a new instance of this class, use FeatureCollection.createSweptBuilder(nxopen.features.Swept) Default values. |
interface |
SweptVolumeBuilder
Represents a
SweptVolume builder
To create a new instance of this class, use SweepFeatureCollection.createSweptVolumeBuilder(nxopen.features.SweptVolume) Default values. |
interface |
SymmetricBuilder
Represents a
Symmetric builder To create a new instance of this class, use FeatureCollection.createSymmetricBuilder(nxopen.features.Symmetric) Default values. |
interface |
TangentBuilder
Represents a
Tangent builder
To create a new instance of this class, use FeatureCollection.createTangentBuilder(nxopen.features.Tangent) Default values. |
interface |
TextBuilder
Represents a
Text builder
To create a new instance of this class, use FeatureCollection.createTextBuilder(nxopen.features.Text) Default values. |
interface |
ThickenBuilder
Represents a builder for a
Thicken feature. |
interface |
ThroughCurveMeshBuilder
Represents a
ThroughCurveMesh builder. |
interface |
ThroughCurvesBuilder
Represents a
ThroughCurves builder. |
interface |
ToolingBoxBuilder
Represents a
ToolingBox builder
To create a new instance of this class, use ToolingFeatureCollection.createToolingBoxBuilder(nxopen.features.ToolingBox) Default values. |
interface |
TrimAndExtendBuilder
Represents a
TrimAndExtend builder
To create a new instance of this class, use TrimFeatureCollection.createTrimAndExtendBuilder(nxopen.features.TrimAndExtend) Default values. |
interface |
TrimBody2Builder
Represents a
TrimBody2 builder for Trim Body
feature. |
interface |
TrimBodyBuilder
Represents the trim body feature builder.
|
interface |
TrimCornerBuilder
Represents a builder for non-associative trim corner operation.
|
interface |
TrimCurve2Builder
Represents a
TrimCurve2 builder
To create a new instance of this class, use FeatureCollection.createTrimCurve2FeatureBuilder(nxopen.features.TrimCurve2) Default values. |
interface |
TrimCurveBuilder
Represents a
TrimCurve builder
To create a new instance of this class, use FeatureCollection.createTrimCurveBuilder(nxopen.features.TrimCurve) Default values. |
interface |
TrimExtendBuilder
Represents a
TrimExtend builder. |
interface |
TrimSheetBuilder
Represents a
TrimSheet builder. |
interface |
TubeBuilder
Represents a
Tube builder
To create a new instance of this class, use FeatureCollection.createTubeBuilder(nxopen.features.Feature) Default values. |
interface |
UnsewBuilder
Represents a
Unsew builder
To create a new instance of this class, use FeatureCollection.createUnsewBuilder(nxopen.features.Unsew) Default values. |
interface |
UntrimBuilder
Represents a
Untrim builder
To create a new instance of this class, use FeatureCollection.createUntrimBuilder(nxopen.features.Feature) Created in NX5.0.0 |
interface |
UserDefinedObjectFeatureBuilder
Represents a user defined object feature builder.
|
interface |
VariableOffsetBuilder
Represents a
VariableOffset builder
To create a new instance of this class, use FeatureCollection.createVariableOffsetBuilder(nxopen.features.VariableOffset) Default values. |
interface |
VarOffsetFaceBuilder
Represents a
VarOffsetFace builder
To create a new instance of this class, use FeatureCollection.createVarOffsetFaceBuilder(nxopen.features.VarOffsetFace) Default values. |
interface |
VarsweepBuilder
Represents a Variational Sweep feature builder.
|
interface |
VirtualBlendEdgeBuilder
Represents a
VirtualBlendEdgeBuilder To create a new instance of this class, use FeatureCollection.createVirtualBlendEdgeBuilder() Created in NX7.0.1 |
interface |
VirtualCurveBuilder
Represents a
VirtualCurve builder
To create a new instance of this class, use FeatureCollection.createVirtualCurveBuilder(nxopen.features.VirtualCurve) Default values. |
interface |
WaveDatumBuilder
Represents a Wave Datum builder.
|
interface |
WaveLinkBuilder
Represents a Wavelink Feature builder.
|
interface |
WavePointBuilder
Represents a
Feature builder
To create a new instance of this class, use FeatureCollection.createWavePointBuilder(nxopen.features.Feature) Default values. |
interface |
WaveRoutingBuilder
Represents a
WaveRoutingBuilder
To create a new instance of this class, use FeatureCollection.createWaveRoutingBuilder(nxopen.features.Feature) Default values. |
interface |
WaveSketchBuilder
Represents a WaveSketchBuilder.
|
interface |
WrapBuilder
Represents a
WrapUnwrap builder. |
interface |
WrapGeometryBuilder
Represents a
WrapGeometry builder
To create a new instance of this class, use FeatureCollection.createWrapGeometryBuilder(nxopen.features.WrapGeometry) Default values. |
Modifier and Type | Method and Description |
---|---|
ReferenceMapperBuilder |
FeatureCollection.createReferenceMapperBuilder(FeatureBuilder booleanBuilderTag)
Creates a
ReferenceMapperBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX7.5.0 |
Modifier and Type | Interface and Description |
---|---|
interface |
AdvancedFlangeBuilder
Represents a Sheetmetal Advanced Flange builder class.
|
interface |
AeroFlatPatternBuilder
Represents a Flat Pattern feature builder.
|
interface |
AeroFlatSolidBuilder
Represents a Flat As Solid feature builder.
|
interface |
AeroJoggleBuilder
Represents a Aerospace Sheet Metal Joggle Builder.
|
interface |
AeroLighteningCutoutBuilder
Represents a
AeroLighteningCutoutBuilder
To create a new instance of this class, use AeroSheetmetalManager.createAeroLighteningCutoutBuilder(nxopen.features.Feature) Default values. |
interface |
AeroReformBuilder
Represents a Aerospace Sheet Metal REFORM Builder.
|
interface |
AeroUnformBuilder
Represents a Aerospace Sheet Metal UNFORM Builder.
|
interface |
BeadBuilder
Represents a Bead feature builder.
|
interface |
BendBuilder
Represents a Bend feature builder.
|
interface |
BendTaperBuilder
Represents a Bend Taper feature builder
To create a new instance of this class, use SheetmetalManager.createBendTaperBuilder(nxopen.features.Feature) Default values. |
interface |
BreakCornerBuilder
Represents a break corner feature builder.
|
interface |
BridgeTransitionBuilder
Represents a Bridge Transition builder
To create a new instance of this class, use SheetmetalManager.createBridgeTransitionBuilder(nxopen.features.Feature) Created in NX5.0.2 |
interface |
CleanUpUtilityBuilder
Represents a Clean-Up Utility builder builder
To create a new instance of this class, use SheetmetalManager.createCleanUpUtilityBuilder() Default values. |
interface |
ClosedCornerBuilder
Represents a Closed corner feature builder.
|
interface |
ContourFlangeBuilder
Represents a Contour Flange feature builder.
|
interface |
ConvertToSheetmetalBuilder
This is the feature builder for the convert to sheetmetal feature.
|
interface |
DimpleBuilder
Represents a Dimple feature builder.
|
interface |
DrawnCutoutBuilder
Represents a Drawn Cutout feature builder.
|
interface |
EdgeRipBuilder
Represents a Edge Rip feature builder.
|
interface |
EditBendBuilder
Represents a
EditBend builder
To create a new instance of this class, use SheetmetalManager.createEditBendBuilder(nxopen.features.Feature) Created in NX7.5.0 |
interface |
EditCornerBuilder
Represents a
EditCornerBuilder
To create a new instance of this class, use SheetmetalManager.createEditCornerBuilder() Default values. |
interface |
FlangeBuilder
Represents a Flange feature builder.
|
interface |
FlatPatternBuilder
Represents a Flat Pattern feature builder.
|
interface |
FlatSolidBuilder
Represents a Flat As Solid feature builder.
|
interface |
FlexibleCableBuilder
Represents a Flexible Cable feature builder.
|
interface |
GussetBuilder
Represents a NX Sheet Metal
Gusset builder
To create a new instance of this class, use SheetmetalManager.createGussetBuilder(nxopen.features.Feature) Default values. |
interface |
HemFlangeBuilder
Represents a
HemFlange builder
To create a new instance of this class, use SheetmetalManager.createHemFlangeFeatureBuilder(nxopen.features.Feature) Created in NX5.0.0 |
interface |
JogBuilder
Represents a Jog feature builder.
|
interface |
JoggleBuilder
Represents a Sheetmetal joggle builder class.
|
interface |
LighteningCutoutBuilder
Represents a
LighteningCutout builder To create a new instance of this class, use SheetmetalManager.createLighteningCutoutBuilder(nxopen.features.sheetmetal.LighteningCutout) Default values. |
interface |
LoftedFlangeBuilder
Represents a Lofted Flange feature builder.
|
interface |
LouverBuilder
Represents a louver feature builder.
|
interface |
MetaformBuilder
Represents a
Metaform builder
To create a new instance of this class, use SheetmetalManager.createMetaformBuilder(nxopen.features.Feature) Default values. |
interface |
MigratedPanelBuilder
Represents an I-DEAS Migrated Panel feature builder
This builder cannot be instantiated separately. |
interface |
MultiFlangeBuilder
Represents a
MultiFlange builder
To create a new instance of this class, use SheetmetalManager.createMultiFlangeBuilder(nxopen.features.sheetmetal.MultiFlange) Created in NX12.0.0 |
interface |
NormalCutoutBuilder
Represents a NormalCutout feature builder.
|
interface |
RebendBuilder
The Rebend feature class.
|
interface |
ResizeBendAngleBuilder
Represents a
ResizeBendAngle builder
To create a new instance of this class, use SheetmetalManager.createResizeBendAngleBuilder(nxopen.features.Feature) Created in NX5.0.0 |
interface |
ResizeBendRadiusBuilder
Represents a ResizeBendRadius feature builder.
|
interface |
ResizeNeutralFactorBuilder
Represents a Resize Neutral Factor Builder
To create a new instance of this class, use SheetmetalManager.createResizeNeutralFactorBuilder(nxopen.features.Feature) Created in NX5.0.0 |
interface |
SheetmetalBaseBuilder
Represents a Sheet Metal Feature Builder to be used in the creation and modification of features.
|
interface |
SheetMetalFromSolidBuilder
Represents a
SheetMetalFromSolid builder
(Sheet Metal from Solid). |
interface |
SolidPunchBuilder
Represents a
SolidPunchBuilder
To create a new instance of this class, use SheetmetalManager.createSolidPunchBuilder(nxopen.features.Feature) Created in NX5.0.0 |
interface |
TabBuilder
Represents a Tab feature builder.
|
interface |
ThreeBendCornerBuilder
The Three Bend Corner feature class.
|
interface |
UnbendBuilder
The Unbend feature class.
|
Modifier and Type | Interface and Description |
---|---|
interface |
AlongGuideCutBuilder
Represents a
AlongGuideCut builder
To create a new instance of this class, use ShipCollection.createAlongGuideCutBuilder(nxopen.features.shipdesign.AlongGuideCut) Default values. |
interface |
BracketBuilder
Represents a
Bracket builder. |
interface |
BulkHeadsBuilder
Represents a
BulkHeads builder
To create a new instance of this class, use ShipCollection.createBulkHeadsBuilder(nxopen.features.Feature) Created in NX5.0.0 |
interface |
CollarPlateBuilder
Represents a
CollarPlate builder. |
interface |
ConceptFromSpreadsheetBuilder
Represents a
ConceptFromSpreadsheet builder
To create a new instance of this class, use ShipCollection.createConceptFromSpreadsheetBuilder(nxopen.features.shipdesign.ConceptFromSpreadsheet) Default values. |
interface |
CopyPasteNewBuilder
Represents a
CopyPasteNewBuilder
It is used in Ship Building Application. |
interface |
CornerCutBuilder
Builder used to create or edit a
CornerCut feature. |
interface |
CustomBracketBuilder
Represents a
CustomBracket builder
To create a new instance of this class, use ShipCollection.createCustomBracketBuilder(nxopen.features.Feature) Default values. |
interface |
Cutout2Builder
Represents a
Cutout2 builder
To create a new instance of this class, use ShipCollection.createCutout2Builder(nxopen.features.shipdesign.Cutout2) Default values. |
interface |
CuttingSideFacesBuilder
Used to create a
CuttingSideFacesBuilder which
is used to attribute the cutting side, and opposing cutting side, faces on the plate bodies. |
interface |
DeckBuilder
This class is used to create or edit a
Deck feature. |
interface |
DecksBuilder
Represents a
Decks builder. |
interface |
DeleteSeamBuilder
Used to create a
DeleteSeamBuilder which
is used to delete the seams from the ship structural components. |
interface |
DivideBuilder
Represents a
Divide builder which is used to edit
all divide features. |
interface |
DvToMvMappingBuilder
Represents a
DvToMvMapping builder. |
interface |
EdgeCutBuilder
Represents a
EdgeCut builder. |
interface |
EdgeReinforcementBuilder
Represents a
EdgeReinforcement builder which is used to create or edit a edge reinforcement system feature. |
interface |
EditBoundaryBuilder
Used to create a
EditBoundaryBuilder which
is used to change the boundaries and split knuckle locations of profile systems. |
interface |
EditStockBuilder
Used to create a
EditStockBuilder which
is used to change the stock information on the basic design features. |
interface |
EditWeldingBuilder
Used to create a
EditWeldingBuilder which
is used to change the welding characteristics on the seams in the plate systems. |
interface |
EndCutBuilder
Represents a
EndCut builder. |
interface |
ExcessMaterialBuilder
Represents a
ExcessMaterial builder. |
interface |
FeatureParmsBuilder
This class is used to create or edit the information shared among all Ship Design features.
|
interface |
FrameBarOutBuilder
Represents a
FrameBarOut builder. |
interface |
GenericPlateSystemBuilder
This class is used to create or edit a
GenericPlateSystem feature. |
interface |
HullBuilder
This class is used to create or edit a
Hull feature. |
interface |
InsertFramesBuilder
Represents a
InsertFramesBuilder builder
To create a new instance of this class, use ShipCollection.createInsertFramesBuilder(nxopen.features.Feature) Created in NX5.0.0 |
interface |
InsertSheetBodyBuilder
Represents a
InsertSheetBody builder
To create a new instance of this class, use ShipCollection.createInsertSheetBodyBuilder(nxopen.features.shipdesign.InsertSheetBody) Created in NX5.0.0 |
interface |
InverseBendingLinesBuilder
Used to create or edit a
InverseBendingLines feature. |
interface |
ItFramesBuilder
Represents a
ItFrames builder
To create a new instance of this class, use ShipCollection.createItFramesBuilder(nxopen.features.Feature) Created in NX5.0.0 |
interface |
KnuckledProfilesBuilder
Represents a
KnuckledProfiles builder
To create a new instance of this class, use ShipCollection.createKnuckledProfilesBuilder(nxopen.features.shipdesign.KnuckledProfiles) Created in NX5.0.3 |
interface |
LongitudinalBulkheadBuilder
This class is used to create or edit a
LongitudinalBulkhead feature. |
interface |
MainDimensionsBuilder
Represents a
MainDimensions builder. |
interface |
ManufacturingOutBuilder
Represents a
ManufacturingOut builder
To create a new instance of this class, use ShipCollection.createManufacturingOutBuilder(nxopen.features.Feature) Created in NX5.0.0 |
interface |
ManufacturingPreparationBuilder
This builder is used to adds attributes to the part and body identifying manufacturing related data.
|
interface |
MarkingLineBuilder
Represents a MarkingLine Feature builder
To create a new instance of this class, use ShipCollection.createMarkingLineBuilder(nxopen.features.Feature) Created in NX5.0.0 |
interface |
MarkingLineDesignBuilder
Represents a new MarkingLine Feature builder.
|
interface |
PillarBuilder
Represents a
Pillar builder
To create a new instance of this class, use ShipCollection.createPillarBuilder(nxopen.features.shipdesign.Pillar) Default values. |
interface |
PillarSystemBuilder
Represents a
PillarSystem builder which is used to create or edit a pillar system feature. |
interface |
PinJigBuilder
Represents a
PinJig builder
To create a new instance of this class, use ShipCollection.createPinJigBuilder(nxopen.features.shipdesign.PinJig) Created in NX10.0.0 |
interface |
PlateBuilder
Represents a
Plate builder. |
interface |
PlateChamferBuilder
Represents a
PlateChamfer builder. |
interface |
PlateDivideBuilder
Represents a
PlateDivide builder which is used to edit
a plate divide feature. |
interface |
PlatePreparationBuilder
Used to create or edit a
PlatePreparation feature. |
interface |
PlateSystemBuilder
This class is used to create or edit the information shared between all the Basic Design plate system
features in the Ship Design application.
|
interface |
ProfileBuilder
Represents a
Profile builder
To create a new instance of this class, use ShipCollection.createProfileBuilder(nxopen.features.Feature) Default values. |
interface |
ProfileCutoutBuilder
Represents a
ProfileCutout builder
To create a new instance of this class, use ShipCollection.createProfileCutoutBuilder(nxopen.features.Feature) Default values. |
interface |
ProfileListBuilder
Represents a
ProfileList builder
To create a new instance of this class, use ShipCollection.createProfileListBuilder(nxopen.features.Feature) Created in NX5.0.0 |
interface |
ProfileSystemBuilder
This class is used to create or edit the information shared between all the Basic Design profile system
features in the Ship Design application.
|
interface |
ProfileTransitionBuilder
Builder used to create or edit a
ProfileTransition feature. |
interface |
ReferenceLineBuilder
Represents a
ReferenceLine builder. |
interface |
ReverseSplitBuilder
This class is used to provide the capability to reverse the split interaction between
ship structures.
|
interface |
RollingLineBuilder
Represents a
RollingLine builder. |
interface |
SeamBuilder
A
SeamBuilder used to create or edit a
ship design Seam feature. |
interface |
ShellExpansionBuilder
Represents a
ShellExpansion builder
To create a new instance of this class, use ShipCollection.createShellExpansionBuilder(nxopen.features.shipdesign.ShellExpansion) Default values. |
interface |
ShellTemplateBuilder
Used to edit or create a
ShellTemplate feature. |
interface |
ShipCutoutBuilder
Represents a
ShipCutout builder
To create a new instance of this class, use ShipCollection.createShipCutoutBuilder(nxopen.features.shipdesign.ShipCutout) Default values. |
interface |
ShipDesignPreferencesBuilder
Represents a
ShipDesignPreferencesBuilder which
is used to change default object display settings for ship structures. |
interface |
ShipEndCutBuilder
Represents a
ShipEndCut builder
To create a new instance of this class, use ShipCollection.createShipEndCutBuilder(nxopen.features.shipdesign.ShipEndCut) Default values. |
interface |
ShipFlatPatternBuilder
Deprecated.
Deprecated in NX8.0.0. Use
PlatePreparationBuilder instead.
|
interface |
ShipIntersectionsBuilder
Represents a
ShipIntersections builder
To create a new instance of this class, use ShipCollection.createShipIntersectionsBuilder(nxopen.features.shipdesign.ShipIntersections) Default values. |
interface |
ShipPreparationBuilder
Creates a builder used to prepare basic design data for meshing.
|
interface |
ShipProfileCutoutBuilder
Represents a
ProfileCutout builder for editing legacy(NX75) profile cutout feature. |
interface |
ShipSectionBuilder
Represents a
ShipSection builder
To create a new instance of this class, use ShipCollection.createShipSectionBuilder(nxopen.features.shipdesign.ShipSection) Default values. |
interface |
SmartRuleBuilder
Represents a
SmartRule builder
To create a new instance of this class, use ShipCollection.createSmartRuleBuilder(nxopen.features.shipdesign.SmartRule) Created in NX8.0.0 |
interface |
SteelCollarPlateBuilder
Represents a
SteelCollarPlate builder
To create a new instance of this class, use ShipCollection.createSteelCollarPlateBuilder(nxopen.features.shipdesign.SteelCollarPlate) Default values. |
interface |
SteelDistributionBuilder
Represents a
SteelDistribution builder
To create a new instance of this class, use ShipCollection.createSteelDistributionBuilder(nxopen.features.Feature) Created in NX5.0.0 |
interface |
SteelInsulationBuilder
Represents a builder that is used to create or edit a
SteelInsulation feature. |
interface |
SteelSupportBuilder
Represents a
SteelSupport builder
To create a new instance of this class, use ShipCollection.createSteelSupportBuilder(nxopen.features.shipdesign.SteelSupport) Default values. |
interface |
SteelVentHolesBuilder
Represents a
SteelVentHoles builder
To create a new instance of this class, use ShipCollection.createSteelVentHolesBuilder(nxopen.features.shipdesign.SteelVentHoles) Default values. |
interface |
StiffenerBuilder
Represents a
Stiffener builder
To create a new instance of this class, use ShipCollection.createStiffenerBuilder(nxopen.features.shipdesign.Stiffener) Default values. |
interface |
StiffenerSystemBuilder
This class is used to create or edit a
StiffenerSystem feature. |
interface |
SubSystemBuilder
This class is used to
edit the Sub System Definition of a
SubSystems feature. |
interface |
SubSystemsBuilder
This class is used to
edit a
SubSystems feature. |
interface |
TraceLinesBuilder
Represents a
TraceLines builder
To create a new instance of this class, use ShipCollection.createTraceLinesBuilder(nxopen.features.shipdesign.TraceLines) Default values. |
interface |
TransFrameBuilder
Represents a
TransFrame builder
To create a new instance of this class, use ShipCollection.createTransFrameBuilder(nxopen.features.Feature) Created in NX5.0.0 |
interface |
TransverseBulkheadBuilder
This class is used to create or edit a
TransverseBulkhead feature. |
interface |
UpdateShipLibraryBuilder
Represents a
UpdateShipLibrary builder
To create a new instance of this class, use ShipCollection.createUpdateShipLibraryBuilder(nxopen.features.Feature) Default values. |
interface |
VentHolesMarkingBuilder
Represents a
VentHolesMarking builder
To create a new instance of this class, use ShipCollection.createVentHolesMarkingBuilder(nxopen.features.shipdesign.VentHolesMarking) Created in NX5.0.3 |
interface |
VentilationHoles2Builder
Represents a
VentilationHoles2 builder
To create a new instance of this class, use ShipCollection.createVentilationHoles2Builder(nxopen.features.shipdesign.VentilationHoles2) Default values. |
interface |
WeldCut2Builder
Represents a
WeldCut2 builder
To create a new instance of this class, use ShipCollection.createWeldCut2Builder(nxopen.features.shipdesign.WeldCut2) Default values. |
interface |
WeldCutBuilder
Represents a
WeldCut builder
To create a new instance of this class, use ShipCollection.createWeldCutBuilder(nxopen.features.Feature) Default values. |
interface |
YFrameBuilder
Represents a
YFrameBuilder
To create a new instance of this class, use ShipCollection.createYFrameBuilder(nxopen.features.Feature) Created in NX5.0.0 |
interface |
ZFrameBuilder
Represents a
ZFrameBuilder
To create a new instance of this class, use ShipCollection.createZFrameBuilder(nxopen.features.Feature) Created in NX5.0.0 |
Modifier and Type | Method and Description |
---|---|
void |
ShipAttributeHolder.copyAttributesToObjects(boolean bCreate,
FeatureBuilder featBuilder)
Copies attributes from proxy to feature objects
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing") . |
void |
ShipAttributeHolder.copyAttributesToPart(boolean bCreate,
FeatureBuilder featBuilder)
Copies the attributes from proxy to part
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing") . |
void |
ShipAttributeHolder.getContextAttributeFromNamesBuilder(FeatureBuilder featBuilder)
Gets context attribute from names builder
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing") . |
void |
ShipAttributeHolder.setAttributesToObjects(boolean bCreate,
FeatureBuilder featBuilder)
Deprecated.
Deprecated in NX8.0.2. Use
ShipAttributeHolder.setAttributesToProxy(nxopen.NXObject) instead.
|
void |
ShipAttributeHolder.setAttributeToProxyFromBuilder(FeatureBuilder featBuilder)
Sets attribute proxy
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing") . |
Modifier and Type | Interface and Description |
---|---|
interface |
CagePolylineBuilder
Cage polyline builder class.
|
Modifier and Type | Interface and Description |
---|---|
interface |
ColumnFeatureBuilder
Represents a
LineDesigner.ColumnFeature Features.FeatureBuilder
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createColumnFeatureBuilder Default values. |
interface |
HoleFeatureBuilder
Represents a
LineDesigner.HoleFeature builder
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createHoleFeatureBuilder Default values. |
interface |
RailingFeatureBuilder
Represents a
LineDesigner.RailingFeature Features.FeatureBuilder
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createRailingFeatureBuilder Default values. |
interface |
TypedConnectorFeatureBuilder
Represents a
LineDesigner.TypedConnectorFeature Features.FeatureBuilder
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createTypedConnectorFeatureBuilder Default values. |
Modifier and Type | Interface and Description |
---|---|
interface |
DieEngDieTipBuilder
Die Engineer die tip management builder.
|
interface |
DieEngFormTaskBuilder
Represents a Form Task builder
To create a new instance of this class, use AutoDieCollection.createDieEngFormTaskBuilder(nxopen.features.Feature) Default values. |
interface |
DieEngLineupBuilder
Die Engineer lineup management builder.
|
interface |
DieEngStampingCarryoverBuilder
Represents a Stamping Carryover builder
To create a new instance of this class, use AutoDieCollection.createDieEngStampingCarryoverBuilder(nxopen.features.BodyFeature) Created in NX10.0.0 |
interface |
DieEngStampingOutputBuilder
Represents a Stamping Output builder
To create a new instance of this class, use AutoDieCollection.createDieEngStampingOutputBuilder(nxopen.features.BodyFeature) Default values. |
interface |
DieEngTrimTaskBuilder
Die Engineer trim task management builder, create a trim task by selected die tip, trim bounds,
start plane and end plane.
|
interface |
PrebendBuilder
Represents a
PrebendBuilder builder to divide bend faces. |
interface |
UniversalUnformBuilder
Represents a
UniversalUnformBuilder builder. |
Modifier and Type | Interface and Description |
---|---|
interface |
CompoundWeldBuilder
Represents a
CompoundWeld builder. |
interface |
FilletBuilder
Represents a
Fillet builder. |
interface |
GrooveBuilder
Represents a Groove Weld feature
To create a new instance of this class, use WeldManager.createWeldGrooveBuilder(nxopen.features.Feature) Created in NX5.0.0 |
interface |
JointmarkBuilder
Represents a
Jointmark builder To create a new instance of this class, use WeldManager.createJointmarkBuilder(nxopen.weld.Jointmark) Default values. |
interface |
PlugSlotBuilder
Represents a
PlugSlot builder To create a new instance of this class, use WeldManager.createPlugSlotBuilder(nxopen.features.Feature) Default values. |
interface |
PointMarkBuilder
Used to create or edit a
PointMark feature. |
interface |
TransformBuilder
Represents a
TransformBuilder builder To create a new instance of this class, use WeldManager.createTransformBuilder(nxopen.weld.Transform) Created in NX11.0.1 |
interface |
WeldGrooveBuilder
Represents a
WeldGroove builder To create a new instance of this class, use WeldManager.createWeldGroove1Builder(nxopen.features.Feature) Default values. |
Copyright 2017 Siemens Product Lifecycle Management Software Inc. All Rights Reserved.